From 702b59e623c3ca80beaeab79ca5ede4ea23170e2 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 26 Jun 2009 21:36:36 +0100
Subject: [PATCH 001/257] [ARM] 5573/1: ep93xx: ensure typesafe io

ARM: ep93xx: ensure typesafe io

For the ep93xx platform, all EP93XX_*_BASE defines are based
on virtual addresses.  Ensure that all these defines are
properly typesafe for the __raw_{read/write}* macros.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../mach-ep93xx/include/mach/ep93xx-regs.h    | 61 ++++++++++---------
 arch/arm/mach-ep93xx/include/mach/io.h        | 17 +++++-
 2 files changed, 47 insertions(+), 31 deletions(-)

diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 967c079180d..49b256b3ddf 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -52,40 +52,43 @@
 #define EP93XX_AHB_VIRT_BASE		0xfef00000
 #define EP93XX_AHB_SIZE			0x00100000
 
+#define EP93XX_AHB_IOMEM(x)		IOMEM(EP93XX_AHB_VIRT_BASE + (x))
+
 #define EP93XX_APB_PHYS_BASE		0x80800000
 #define EP93XX_APB_VIRT_BASE		0xfed00000
 #define EP93XX_APB_SIZE			0x00200000
 
+#define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
+
 
 /* AHB peripherals */
-#define EP93XX_DMA_BASE			((void __iomem *)		\
-					 (EP93XX_AHB_VIRT_BASE + 0x00000000))
+#define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
 
-#define EP93XX_ETHERNET_BASE		(EP93XX_AHB_VIRT_BASE + 0x00010000)
 #define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
 
-#define EP93XX_USB_BASE			(EP93XX_AHB_VIRT_BASE + 0x00020000)
 #define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
 
-#define EP93XX_RASTER_BASE		(EP93XX_AHB_VIRT_BASE + 0x00030000)
+#define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
 
-#define EP93XX_GRAPHICS_ACCEL_BASE	(EP93XX_AHB_VIRT_BASE + 0x00040000)
+#define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
 
-#define EP93XX_SDRAM_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00060000)
+#define EP93XX_SDRAM_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00060000)
 
-#define EP93XX_PCMCIA_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00080000)
+#define EP93XX_PCMCIA_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00080000)
 
-#define EP93XX_BOOT_ROM_BASE		(EP93XX_AHB_VIRT_BASE + 0x00090000)
+#define EP93XX_BOOT_ROM_BASE		EP93XX_AHB_IOMEM(0x00090000)
 
-#define EP93XX_IDE_BASE			(EP93XX_AHB_VIRT_BASE + 0x000a0000)
+#define EP93XX_IDE_BASE			EP93XX_AHB_IOMEM(0x000a0000)
 
-#define EP93XX_VIC1_BASE		(EP93XX_AHB_VIRT_BASE + 0x000b0000)
+#define EP93XX_VIC1_BASE		EP93XX_AHB_IOMEM(0x000b0000)
 
-#define EP93XX_VIC2_BASE		(EP93XX_AHB_VIRT_BASE + 0x000c0000)
+#define EP93XX_VIC2_BASE		EP93XX_AHB_IOMEM(0x000c0000)
 
 
 /* APB peripherals */
-#define EP93XX_TIMER_BASE		(EP93XX_APB_VIRT_BASE + 0x00010000)
+#define EP93XX_TIMER_BASE		EP93XX_APB_IOMEM(0x00010000)
 #define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
 #define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
 #define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
@@ -102,11 +105,11 @@
 #define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
 #define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
 
-#define EP93XX_I2S_BASE			(EP93XX_APB_VIRT_BASE + 0x00020000)
+#define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
 
-#define EP93XX_SECURITY_BASE		(EP93XX_APB_VIRT_BASE + 0x00030000)
+#define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
 
-#define EP93XX_GPIO_BASE		(EP93XX_APB_VIRT_BASE + 0x00040000)
+#define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
 #define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
 #define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
 #define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
@@ -124,32 +127,32 @@
 #define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
 #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
 
-#define EP93XX_AAC_BASE			(EP93XX_APB_VIRT_BASE + 0x00080000)
+#define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
-#define EP93XX_SPI_BASE			(EP93XX_APB_VIRT_BASE + 0x000a0000)
+#define EP93XX_SPI_BASE			EP93XX_APB_IOMEM(0x000a0000)
 
-#define EP93XX_IRDA_BASE		(EP93XX_APB_VIRT_BASE + 0x000b0000)
+#define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
 
-#define EP93XX_UART1_BASE		(EP93XX_APB_VIRT_BASE + 0x000c0000)
 #define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
 
-#define EP93XX_UART2_BASE		(EP93XX_APB_VIRT_BASE + 0x000d0000)
 #define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_BASE		EP93XX_APB_IOMEM(0x000d0000)
 
-#define EP93XX_UART3_BASE		(EP93XX_APB_VIRT_BASE + 0x000e0000)
 #define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
-#define EP93XX_KEY_MATRIX_BASE		(EP93XX_APB_VIRT_BASE + 0x000f0000)
+#define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
 
-#define EP93XX_ADC_BASE			(EP93XX_APB_VIRT_BASE + 0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE		(EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
-#define EP93XX_PWM_BASE			(EP93XX_APB_VIRT_BASE + 0x00110000)
+#define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
-#define EP93XX_RTC_BASE			(EP93XX_APB_VIRT_BASE + 0x00120000)
 #define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
 
-#define EP93XX_SYSCON_BASE		(EP93XX_APB_VIRT_BASE + 0x00130000)
+#define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
 #define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
 #define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
 #define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
@@ -179,7 +182,7 @@
 #define EP93XX_SYSCON_DEVICE_CONFIG_U1EN		(1<<18)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
-#define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)
+#define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
 
 
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index fd5f081cc8b..cebcc1c53d6 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,8 +1,21 @@
 /*
  * arch/arm/mach-ep93xx/include/mach/io.h
  */
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
 
 #define IO_SPACE_LIMIT		0xffffffff
 
-#define __io(p)		__typesafe_io(p)
-#define __mem_pci(p)	(p)
+#define __io(p)			__typesafe_io(p)
+#define __mem_pci(p)		(p)
+
+/*
+ * A typesafe __io() variation for variable initialisers
+ */
+#ifdef __ASSEMBLER__
+#define IOMEM(p)		p
+#else
+#define IOMEM(p)		((void __iomem __force *)(p))
+#endif
+
+#endif /* __ASM_MACH_IO_H */
-- 
GitLab


From ddf4f3d994651ee2924432a618d9caefed411dc1 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 26 Jun 2009 21:39:27 +0100
Subject: [PATCH 002/257] [ARM] 5574/1: ep93xx: gpio.c: fix header includes and
 __iomem pointers

Fix ep93xx gpio.c header includes and __iomem pointers.

  1. <linux/gpio.h> should be included instead of <asm/gpio.h>
  2. <mach/hardware.h> should be included instead of <mach/ep93xx-regs.h>
  3. data_reg and data_dir_reg in struct ep93xx_gpio_chip should be
     void __iomem pointers not unsigned int

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/gpio.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 482cf3d2fbc..7b7a564916f 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -17,15 +17,15 @@
 #include <linux/module.h>
 #include <linux/seq_file.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
-#include <mach/ep93xx-regs.h>
-#include <asm/gpio.h>
+#include <mach/hardware.h>
 
 struct ep93xx_gpio_chip {
 	struct gpio_chip	chip;
 
-	unsigned int		data_reg;
-	unsigned int		data_dir_reg;
+	void __iomem		*data_reg;
+	void __iomem		*data_dir_reg;
 };
 
 #define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
-- 
GitLab


From f04989bbf4a40077dc7ddcc3dccde11a5f3e91f2 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 26 Jun 2009 21:40:34 +0100
Subject: [PATCH 003/257] [ARM] 5575/1: ep93xx: Show gpio interrupt type in
 debugfs output.

ep93xx: Show gpio interrupt type in debugfs output.

EP93xx uses a private implementation for the debugfs output.
Modify this output so it includes the interrupt type when the
gpio is configured as an interrupt

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/gpio.c | 56 +++++++++++++++++++++++++++++++++----
 1 file changed, 51 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 7b7a564916f..2d83d69e2ee 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -111,15 +111,61 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
 	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
 	u8 data_reg, data_dir_reg;
-	int i;
+	int gpio, i;
 
 	data_reg = __raw_readb(ep93xx_chip->data_reg);
 	data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg);
 
-	for (i = 0; i < chip->ngpio; i++)
-		seq_printf(s, "GPIO %s%d: %s %s\n", chip->label, i,
-			   (data_reg & (1 << i)) ? "set" : "clear",
-			   (data_dir_reg & (1 << i)) ? "out" : "in");
+	gpio = ep93xx_chip->chip.base;
+	for (i = 0; i < chip->ngpio; i++, gpio++) {
+		int is_out = data_dir_reg & (1 << i);
+
+		seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s",
+				chip->label, i, gpio,
+				gpiochip_is_requested(chip, i) ? : "",
+				is_out ? "out" : "in ",
+				(data_reg & (1 << i)) ? "hi" : "lo");
+
+		if (!is_out) {
+			int irq = gpio_to_irq(gpio);
+			struct irq_desc *desc = irq_desc + irq;
+
+			if (irq >= 0 && desc->action) {
+				char *trigger;
+
+				switch (desc->status & IRQ_TYPE_SENSE_MASK) {
+				case IRQ_TYPE_NONE:
+					trigger = "(default)";
+					break;
+				case IRQ_TYPE_EDGE_FALLING:
+					trigger = "edge-falling";
+					break;
+				case IRQ_TYPE_EDGE_RISING:
+					trigger = "edge-rising";
+					break;
+				case IRQ_TYPE_EDGE_BOTH:
+					trigger = "edge-both";
+					break;
+				case IRQ_TYPE_LEVEL_HIGH:
+					trigger = "level-high";
+					break;
+				case IRQ_TYPE_LEVEL_LOW:
+					trigger = "level-low";
+					break;
+				default:
+					trigger = "?trigger?";
+					break;
+				}
+
+				seq_printf(s, " irq-%d %s%s",
+						irq, trigger,
+						(desc->status & IRQ_WAKEUP)
+							? " wakeup" : "");
+			}
+		}
+
+		seq_printf(s, "\n");
+	}
 }
 
 #define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio)			\
-- 
GitLab


From 226ddb9833a3c2f1087bfac70659d8e318d3c31f Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Wed, 24 Jun 2009 17:13:47 +0100
Subject: [PATCH 004/257] [ARM] 5564/1: at91: add gpio button and leds support
 for at91sam9rlek

This adds input keyboard gpio support on at91sam9rlek board. It adds button 1
and 2 (left and right click).
It also adds gpio leds ds1, ds2 and ds3.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9rlek.c | 79 +++++++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e12a49d1a..9120d5d3a6f 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -15,6 +15,8 @@
 #include <linux/spi/spi.h>
 #include <linux/fb.h>
 #include <linux/clk.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <video/atmel_lcdc.h>
 
@@ -206,6 +208,79 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
 #endif
 
 
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* "bottom" led, green, userled1 to be defined */
+		.name			= "ds1",
+		.gpio			= AT91_PIN_PD15,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "bottom" led, green, userled2 to be defined */
+		.name			= "ds2",
+		.gpio			= AT91_PIN_PD16,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "power" led, yellow */
+		.name			= "ds3",
+		.gpio			= AT91_PIN_PD14,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PB0,
+		.code		= BTN_2,
+		.desc		= "Right Click",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PB1,
+		.code		= BTN_1,
+		.desc		= "Left Click",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PB1, 1);	/* btn1 */
+	at91_set_deglitch(AT91_PIN_PB1, 1);
+	at91_set_gpio_input(AT91_PIN_PB0, 1);	/* btn2 */
+	at91_set_deglitch(AT91_PIN_PB0, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -224,6 +299,10 @@ static void __init ek_board_init(void)
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Touch Screen Controller */
 	at91_add_device_tsadcc();
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* Push Buttons */
+	ek_add_device_buttons();
 }
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
-- 
GitLab


From 7c6425a0404399ba78852ef4108007ecf51ef3dc Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Wed, 24 Jun 2009 23:15:23 +0100
Subject: [PATCH 005/257] [ARM] 5566/1: Remove at91_gpiolib_request

Remove at91_gpiolib_request. It returns -EPERM if a request pin is not
in GPIO mode, however we want to be able to gpio_request alternative
function pins to reserve them, and in some cases we need to be able to
use the gpiolib functions on alternative function pins.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/gpio.c | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index f2236f0e101..ae4772e744a 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -44,13 +44,11 @@ static int at91_gpiolib_direction_output(struct gpio_chip *chip,
 					 unsigned offset, int val);
 static int at91_gpiolib_direction_input(struct gpio_chip *chip,
 					unsigned offset);
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
 
 #define AT91_GPIO_CHIP(name, base_gpio, nr_gpio)			\
 	{								\
 		.chip = {						\
 			.label		  = name,			\
-			.request	  = at91_gpiolib_request,	\
 			.direction_input  = at91_gpiolib_direction_input, \
 			.direction_output = at91_gpiolib_direction_output, \
 			.get		  = at91_gpiolib_get,		\
@@ -588,19 +586,6 @@ static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
 	__raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
 }
 
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
-{
-	unsigned pin = chip->base + offset;
-	void __iomem *pio = pin_to_controller(pin);
-	unsigned mask = pin_to_mask(pin);
-
-	/* Cannot request GPIOs that are in alternate function mode */
-	if (!(__raw_readl(pio + PIO_PSR) & mask))
-		return -EPERM;
-
-	return 0;
-}
-
 static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
 	int i;
-- 
GitLab


From 2ef9df7ada6b6dd53446a994ef6e3a6ad5a300ef Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:57 +0100
Subject: [PATCH 006/257] [ARM] 5569/1: at91: Support for at91sam9g45: clocks
 management

Add the at91sam9g45 series support to the AT91 generic clock file.
This takes care of the particularities of the PMC for this series.
It also takes advantage of the management by functionalities of
those PLLs and clocks.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/clock.c | 62 ++++++++++++++++++++++++++++++++------
 1 file changed, 52 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index bac578fe0d3..6396680271e 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -47,20 +47,25 @@
  * Chips have some kind of clocks : group them by functionality
  */
 #define cpu_has_utmi()		(  cpu_is_at91cap9() \
-				|| cpu_is_at91sam9rl())
+				|| cpu_is_at91sam9rl() \
+				|| cpu_is_at91sam9g45())
 
-#define cpu_has_800M_plla()	(cpu_is_at91sam9g20())
+#define cpu_has_800M_plla()	(  cpu_is_at91sam9g20() \
+				|| cpu_is_at91sam9g45())
 
-#define cpu_has_pllb()		(!cpu_is_at91sam9rl())
+#define cpu_has_300M_plla()	(0)
 
-#define cpu_has_upll()		(0)
+#define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
+				|| cpu_is_at91sam9g45()))
+
+#define cpu_has_upll()		(cpu_is_at91sam9g45())
 
 /* USB host HS & FS */
 #define cpu_has_uhp()		(!cpu_is_at91sam9rl())
 
 /* USB device FS only */
-#define cpu_has_udpfs()		(!cpu_is_at91sam9rl())
-
+#define cpu_has_udpfs()		(!(cpu_is_at91sam9rl() \
+				|| cpu_is_at91sam9g45()))
 
 static LIST_HEAD(clocks);
 static DEFINE_SPINLOCK(clk_lock);
@@ -133,6 +138,13 @@ static void pmc_uckr_mode(struct clk *clk, int is_on)
 {
 	unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
 
+	if (cpu_is_at91sam9g45()) {
+		if (is_on)
+			uckr |= AT91_PMC_BIASEN;
+		else
+			uckr &= ~AT91_PMC_BIASEN;
+	}
+
 	if (is_on) {
 		is_on = AT91_PMC_LOCKU;
 		at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
@@ -310,6 +322,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 	unsigned long	flags;
 	unsigned	prescale;
 	unsigned long	actual;
+	unsigned long	prev = ULONG_MAX;
 
 	if (!clk_is_programmable(clk))
 		return -EINVAL;
@@ -317,8 +330,16 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 
 	actual = clk->parent->rate_hz;
 	for (prescale = 0; prescale < 7; prescale++) {
-		if (actual && actual <= rate)
+		if (actual > rate)
+			prev = actual;
+
+		if (actual && actual <= rate) {
+			if ((prev - rate) < (rate - actual)) {
+				actual = prev;
+				prescale--;
+			}
 			break;
+		}
 		actual >>= 1;
 	}
 
@@ -373,6 +394,10 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 		return -EBUSY;
 	if (!clk_is_primary(parent) || !clk_is_programmable(clk))
 		return -EINVAL;
+
+	if (cpu_is_at91sam9rl() && parent->id == AT91_PMC_CSS_PLLB)
+		return -EINVAL;
+
 	spin_lock_irqsave(&clk_lock, flags);
 
 	clk->rate_hz = parent->rate_hz;
@@ -637,6 +662,7 @@ int __init at91_clock_init(unsigned long main_clock)
 {
 	unsigned tmp, freq, mckr;
 	int i;
+	int pll_overclock = false;
 
 	/*
 	 * When the bootloader initialized the main oscillator correctly,
@@ -654,12 +680,25 @@ int __init at91_clock_init(unsigned long main_clock)
 
 	/* report if PLLA is more than mildly overclocked */
 	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
-	if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
-	   || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
+	if (cpu_has_300M_plla()) {
+		if (plla.rate_hz > 300000000)
+			pll_overclock = true;
+	} else if (cpu_has_800M_plla()) {
+		if (plla.rate_hz > 800000000)
+			pll_overclock = true;
+	} else {
+		if (plla.rate_hz > 209000000)
+			pll_overclock = true;
+	}
+	if (pll_overclock)
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
+	if (cpu_is_at91sam9g45()) {
+		mckr = at91_sys_read(AT91_PMC_MCKR);
+		plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12));	/* plla divisor by 2 */
+	}
 
-	if (cpu_has_upll() && !cpu_has_pllb()) {
+	if (!cpu_has_pllb() && cpu_has_upll()) {
 		/* setup UTMI clock as the fourth primary clock
 		 * (instead of pllb) */
 		utmi_clk.type |= CLK_TYPE_PRIMARY;
@@ -701,6 +740,9 @@ int __init at91_clock_init(unsigned long main_clock)
 			freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
 		if (mckr & AT91_PMC_PDIV)
 			freq /= 2;		/* processor clock division */
+	} else if (cpu_is_at91sam9g45()) {
+		mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
+			freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 	} else {
 		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));      /* mdiv */
 	}
-- 
GitLab


From fddcc0ae58edefeb7ac1e460411d7dfbe8ebdacc Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:56 +0100
Subject: [PATCH 007/257] [ARM] 5571/1: at91: Basic support for at91sam9g45
 series: header files.

AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
It embedds USB high speed host and device, LCD, DDR2 RAM, and a full set of
peripherals.

Here is the basic header file support for this product series.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/include/mach/at91sam9g45.h | 138 ++++++++++++++++
 .../include/mach/at91sam9g45_matrix.h         | 153 ++++++++++++++++++
 arch/arm/mach-at91/include/mach/cpu.h         |  16 ++
 arch/arm/mach-at91/include/mach/hardware.h    |   2 +
 arch/arm/mach-at91/include/mach/timex.h       |   5 +
 5 files changed, 314 insertions(+)
 create mode 100644 arch/arm/mach-at91/include/mach/at91sam9g45.h
 create mode 100644 arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h

diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
new file mode 100644
index 00000000000..2c42cf5f0c5
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -0,0 +1,138 @@
+/*
+ * Chip-specific header file for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2008-2009 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_H
+#define AT91SAM9G45_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Controller Interrupt */
+#define AT91SAM9G45_ID_PIOA	2	/* Parallel I/O Controller A */
+#define AT91SAM9G45_ID_PIOB	3	/* Parallel I/O Controller B */
+#define AT91SAM9G45_ID_PIOC	4	/* Parallel I/O Controller C */
+#define AT91SAM9G45_ID_PIODE	5	/* Parallel I/O Controller D and E */
+#define AT91SAM9G45_ID_TRNG	6	/* True Random Number Generator */
+#define AT91SAM9G45_ID_US0	7	/* USART 0 */
+#define AT91SAM9G45_ID_US1	8	/* USART 1 */
+#define AT91SAM9G45_ID_US2	9	/* USART 2 */
+#define AT91SAM9G45_ID_US3	10	/* USART 3 */
+#define AT91SAM9G45_ID_MCI0	11	/* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9G45_ID_TWI0	12	/* Two-Wire Interface 0 */
+#define AT91SAM9G45_ID_TWI1	13	/* Two-Wire Interface 1 */
+#define AT91SAM9G45_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9G45_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9G45_ID_SSC0	16	/* Synchronous Serial Controller 0 */
+#define AT91SAM9G45_ID_SSC1	17	/* Synchronous Serial Controller 1 */
+#define AT91SAM9G45_ID_TCB	18	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9G45_ID_PWMC	19	/* Pulse Width Modulation Controller */
+#define AT91SAM9G45_ID_TSC	20	/* Touch Screen ADC Controller */
+#define AT91SAM9G45_ID_DMA	21	/* DMA Controller */
+#define AT91SAM9G45_ID_UHPHS	22	/* USB Host High Speed */
+#define AT91SAM9G45_ID_LCDC	23	/* LCD Controller */
+#define AT91SAM9G45_ID_AC97C	24	/* AC97 Controller */
+#define AT91SAM9G45_ID_EMAC	25	/* Ethernet MAC */
+#define AT91SAM9G45_ID_ISI	26	/* Image Sensor Interface */
+#define AT91SAM9G45_ID_UDPHS	27	/* USB Device High Speed */
+#define AT91SAM9G45_ID_AESTDESSHA 28	/* AES + T-DES + SHA */
+#define AT91SAM9G45_ID_MCI1	29	/* High Speed Multimedia Card Interface 1 */
+#define AT91SAM9G45_ID_VDEC	30	/* Video Decoder */
+#define AT91SAM9G45_ID_IRQ0	31	/* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9G45_BASE_UDPHS		0xfff78000
+#define AT91SAM9G45_BASE_TCB0		0xfff7c000
+#define AT91SAM9G45_BASE_TC0		0xfff7c000
+#define AT91SAM9G45_BASE_TC1		0xfff7c040
+#define AT91SAM9G45_BASE_TC2		0xfff7c080
+#define AT91SAM9G45_BASE_MCI0		0xfff80000
+#define AT91SAM9G45_BASE_TWI0		0xfff84000
+#define AT91SAM9G45_BASE_TWI1		0xfff88000
+#define AT91SAM9G45_BASE_US0		0xfff8c000
+#define AT91SAM9G45_BASE_US1		0xfff90000
+#define AT91SAM9G45_BASE_US2		0xfff94000
+#define AT91SAM9G45_BASE_US3		0xfff98000
+#define AT91SAM9G45_BASE_SSC0		0xfff9c000
+#define AT91SAM9G45_BASE_SSC1		0xfffa0000
+#define AT91SAM9G45_BASE_SPI0		0xfffa4000
+#define AT91SAM9G45_BASE_SPI1		0xfffa8000
+#define AT91SAM9G45_BASE_AC97C		0xfffac000
+#define AT91SAM9G45_BASE_TSC		0xfffb0000
+#define AT91SAM9G45_BASE_ISI		0xfffb4000
+#define AT91SAM9G45_BASE_PWMC		0xfffb8000
+#define AT91SAM9G45_BASE_EMAC		0xfffbc000
+#define AT91SAM9G45_BASE_AES		0xfffc0000
+#define AT91SAM9G45_BASE_TDES		0xfffc4000
+#define AT91SAM9G45_BASE_SHA		0xfffc8000
+#define AT91SAM9G45_BASE_TRNG		0xfffcc000
+#define AT91SAM9G45_BASE_MCI1		0xfffd0000
+#define AT91SAM9G45_BASE_TCB1		0xfffd4000
+#define AT91SAM9G45_BASE_TC3		0xfffd4000
+#define AT91SAM9G45_BASE_TC4		0xfffd4040
+#define AT91SAM9G45_BASE_TC5		0xfffd4080
+#define AT91_BASE_SYS			0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_DDRSDRC1	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC	(0xfffffdb0 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9G45_BASE_US0
+#define AT91_USART1	AT91SAM9G45_BASE_US1
+#define AT91_USART2	AT91SAM9G45_BASE_US2
+#define AT91_USART3	AT91SAM9G45_BASE_US3
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9G45_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9G45_SRAM_SIZE	SZ_64K		/* Internal SRAM size (64Kb) */
+
+#define AT91SAM9G45_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9G45_ROM_SIZE	SZ_64K		/* Internal ROM size (64Kb) */
+
+#define AT91SAM9G45_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91SAM9G45_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
+#define AT91SAM9G45_OHCI_BASE	0x00700000	/* USB Host controller (OHCI) */
+#define AT91SAM9G45_EHCI_BASE	0x00800000	/* USB Host controller (EHCI) */
+#define AT91SAM9G45_VDEC_BASE	0x00900000	/* Video Decoder Controller */
+
+#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
+
+#define CONSISTENT_DMA_SIZE	SZ_4M
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
new file mode 100644
index 00000000000..c972d60e0ae
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
@@ -0,0 +1,153 @@
+/*
+ * Matrix-centric header file for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2008-2009 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_MATRIX_H
+#define AT91SAM9G45_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+#define			AT91_MATRIX_ULBT_THIRTYTWO	(5 << 0)
+#define			AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
+#define			AT91_MATRIX_ULBT_128		(7 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0x1ff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
+#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
+#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+#define		AT91_MATRIX_RCB9		(1 << 9)
+#define		AT91_MATRIX_RCB10		(1 << 10)
+#define		AT91_MATRIX_RCB11		(1 << 11)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x110)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+#define		AT91_MATRIX_TCM_NWS		(0x1 << 11)	/* Wait state TCM register */
+#define			AT91_MATRIX_TCM_NO_WS		(0x0 << 11)
+#define			AT91_MATRIX_TCM_ONE_WS		(0x1 << 11)
+
+#define AT91_MATRIX_VIDEO	(AT91_MATRIX + 0x118)	/* Video Mode Configuration Register */
+#define		AT91C_VDEC_SEL			(0x1 <<  0) /* Video Mode Selection */
+#define			AT91C_VDEC_SEL_OFF		(0 << 0)
+#define			AT91C_VDEC_SEL_ON		(1 << 0)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x128)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI_CS4A_SMC_CF0		(1 << 4)
+#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI_CS5A_SMC_CF1		(1 << 5)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
+#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
+#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
+#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
+#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
+#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
+#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
+
+#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
+#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
+#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
+#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
+#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
+#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
+#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
+#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
+#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index c554c3e4d55..b73e7bf097d 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -23,6 +23,7 @@
 #define ARCH_ID_AT91SAM9263	0x019607a0
 #define ARCH_ID_AT91SAM9G20	0x019905a0
 #define ARCH_ID_AT91SAM9RL64	0x019b03a0
+#define ARCH_ID_AT91SAM9G45	0x819b05a0
 #define ARCH_ID_AT91CAP9	0x039A03A0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
@@ -39,6 +40,15 @@ static inline unsigned long at91_cpu_identify(void)
 	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
 }
 
+#define ARCH_EXID_AT91SAM9M11	0x00000001
+#define ARCH_EXID_AT91SAM9M10	0x00000002
+#define ARCH_EXID_AT91SAM9G45	0x00000004
+
+static inline unsigned long at91_exid_identify(void)
+{
+	return at91_sys_read(AT91_DBGU_EXID);
+}
+
 
 #define ARCH_FAMILY_AT91X92	0x09200000
 #define ARCH_FAMILY_AT91SAM9	0x01900000
@@ -99,6 +109,12 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91sam9rl()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9G45
+#define cpu_is_at91sam9g45()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
+#else
+#define cpu_is_at91sam9g45()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_AT91CAP9
 #define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
 #define cpu_is_at91cap9_revB()	(at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index da0b681c652..f0869170fa0 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -26,6 +26,8 @@
 #include <mach/at91sam9263.h>
 #elif defined(CONFIG_ARCH_AT91SAM9RL)
 #include <mach/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9g45.h>
 #elif defined(CONFIG_ARCH_AT91CAP9)
 #include <mach/at91cap9.h>
 #elif defined(CONFIG_ARCH_AT91X40)
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index d84c9948bec..38f6c4250c7 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -62,6 +62,11 @@
 #define AT91SAM9_MASTER_CLOCK	132096000
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+
+#define AT91SAM9_MASTER_CLOCK	133333333
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
 #elif defined(CONFIG_ARCH_AT91CAP9)
 
 #define AT91CAP9_MASTER_CLOCK	100000000
-- 
GitLab


From 789b23bc40a67d9a19bedc2655c6bcab79bcabd8 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:58 +0100
Subject: [PATCH 008/257] [ARM] 5572/1: at91: Support for at91sam9g45 series:
 core chip & board support

Here are the at91 specific files dedicated to the at91sam9g45 series. They
mimic the traditional at91 way of managing chips & boards.

The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. In
the future, the main board for this 9g45 series will be the
AT91SAM9M10G45-EK (I choose this last name for the board file).

Simple drivers are enabled in _devices and board- files. Newer peripheral
support will be added in future patches.

Incuded peripherals support (for now):
- USART
- SPI
- Ethernet
- NAND flash
- LCD
- gpio/joystick/buttons
- leds and pwm

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/Kconfig               |   26 +-
 arch/arm/mach-at91/Makefile              |    4 +
 arch/arm/mach-at91/Makefile.boot         |    4 +
 arch/arm/mach-at91/at91sam9g45.c         |  360 +++++++
 arch/arm/mach-at91/at91sam9g45_devices.c | 1230 ++++++++++++++++++++++
 arch/arm/mach-at91/board-sam9m10g45ek.c  |  389 +++++++
 arch/arm/mach-at91/generic.h             |    2 +
 arch/arm/mach-at91/include/mach/board.h  |    8 +-
 drivers/net/Kconfig                      |    2 +-
 drivers/video/Kconfig                    |    2 +-
 10 files changed, 2022 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-at91/at91sam9g45.c
 create mode 100644 arch/arm/mach-at91/at91sam9g45_devices.c
 create mode 100644 arch/arm/mach-at91/board-sam9m10g45ek.c

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 323b47f2b52..22309ba97fa 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -41,6 +41,12 @@ config ARCH_AT91SAM9G20
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
+config ARCH_AT91SAM9G45
+	bool "AT91SAM9G45"
+	select CPU_ARM926T
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
 	select CPU_ARM926T
@@ -280,6 +286,22 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9G45
+
+comment "AT91SAM9G45 Board Type"
+
+config MACH_AT91SAM9G45EKES
+	bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
+	depends on ARCH_AT91SAM9G45
+	help
+	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
+	  "ES" at the end of the name means that this board is an
+	  Engineering Sample.
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91CAP9
 
 comment "AT91CAP9 Board Type"
@@ -321,7 +343,7 @@ config MTD_AT91_DATAFLASH_CARD
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
@@ -383,7 +405,7 @@ config AT91_EARLY_USART2
 
 config AT91_EARLY_USART3
 	bool "USART3"
-	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45)
 
 config AT91_EARLY_USART4
 	bool "USART4"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c69ff237fd1..2975f9ab861 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_d
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o  sam9_smc.o
+ obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
@@ -55,6 +56,9 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
 
+# AT91SAM9G45 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
+
 # AT91CAP9 board-specific support
 obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
 
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 071a2506a69..3462b815054 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -7,6 +7,10 @@ ifeq ($(CONFIG_ARCH_AT91CAP9),y)
    zreladdr-y	:= 0x70008000
 params_phys-y	:= 0x70000100
 initrd_phys-y	:= 0x70410000
+else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
+   zreladdr-y	:= 0x70008000
+params_phys-y	:= 0x70000100
+initrd_phys-y	:= 0x70410000
 else
    zreladdr-y	:= 0x20008000
 params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
new file mode 100644
index 00000000000..85166b7e69a
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -0,0 +1,360 @@
+/*
+ *  Chip-specific setup code for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pm.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9g45_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9G45_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9G45_SRAM_BASE),
+		.length		= AT91SAM9G45_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	}
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioDE_clk = {
+	.name		= "pioDE_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIODE,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+	.name		= "usart3_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+	.name		= "mci0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_MCI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+	.name		= "twi0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TWI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+	.name		= "twi1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TWI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+	.name		= "ssc0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+	.name		= "ssc1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+	.name		= "tcb_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TCB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PWMC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tsc_clk = {
+	.name		= "tsc_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TSC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+	.name		= "dma_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_DMA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhphs_clk = {
+	.name		= "uhphs_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_UHPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+	.name		= "ac97_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_AC97C,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+	.name		= "macb_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+	.name		= "udphs_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_UDPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+	.name		= "mci1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_MCI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+/* One additional fake clock for ohci */
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.parent		= &uhphs_clk,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&pioDE_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&usart3_clk,
+	&mmc0_clk,
+	&twi0_clk,
+	&twi1_clk,
+	&spi0_clk,
+	&spi1_clk,
+	&ssc0_clk,
+	&ssc1_clk,
+	&tcb_clk,
+	&pwm_clk,
+	&tsc_clk,
+	&dma_clk,
+	&uhphs_clk,
+	&lcdc_clk,
+	&ac97_clk,
+	&macb_clk,
+	&isi_clk,
+	&udphs_clk,
+	&mmc1_clk,
+	// irq0
+	&ohci_clk,
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+
+static void __init at91sam9g45_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9g45_gpio[] = {
+	{
+		.id		= AT91SAM9G45_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIOC,
+		.offset		= AT91_PIOC,
+		.clock		= &pioC_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIODE,
+		.offset		= AT91_PIOD,
+		.clock		= &pioDE_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIODE,
+		.offset		= AT91_PIOE,
+		.clock		= &pioDE_clk,
+	}
+};
+
+static void at91sam9g45_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+static void at91sam9g45_poweroff(void)
+{
+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9G45 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9g45_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc));
+
+	at91_arch_reset = at91sam9g45_reset;
+	pm_power_off = at91sam9g45_poweroff;
+	at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9g45_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9g45_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller (FIQ) */
+	7,	/* System Peripherals */
+	1,	/* Parallel IO Controller A */
+	1,	/* Parallel IO Controller B */
+	1,	/* Parallel IO Controller C */
+	1,	/* Parallel IO Controller D and E */
+	0,
+	5,	/* USART 0 */
+	5,	/* USART 1 */
+	5,	/* USART 2 */
+	5,	/* USART 3 */
+	0,	/* Multimedia Card Interface 0 */
+	6,	/* Two-Wire Interface 0 */
+	6,	/* Two-Wire Interface 1 */
+	5,	/* Serial Peripheral Interface 0 */
+	5,	/* Serial Peripheral Interface 1 */
+	4,	/* Serial Synchronous Controller 0 */
+	4,	/* Serial Synchronous Controller 1 */
+	0,	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+	0,	/* Pulse Width Modulation Controller */
+	0,	/* Touch Screen Controller */
+	0,	/* DMA Controller */
+	2,	/* USB Host High Speed port */
+	3,	/* LDC Controller */
+	5,	/* AC97 Controller */
+	3,	/* Ethernet */
+	0,	/* Image Sensor Interface */
+	2,	/* USB Device High speed port */
+	0,
+	0,	/* Multimedia Card Interface 1 */
+	0,
+	0,	/* Advanced Interrupt Controller (IRQ0) */
+};
+
+void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9g45_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
new file mode 100644
index 00000000000..d746e8621bc
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -0,0 +1,1230 @@
+/*
+ *  On-Chip devices setup code for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
+
+#include <linux/fb.h>
+#include <video/atmel_lcdc.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91sam9g45_matrix.h>
+#include <mach/at91sam9_smc.h>
+
+#include "generic.h"
+
+
+/* --------------------------------------------------------------------
+ *  USB Host (OHCI)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_ohci_data;
+
+static struct resource usbh_ohci_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_OHCI_BASE,
+		.end	= AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_UHPHS,
+		.end	= AT91SAM9G45_ID_UHPHS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_ohci_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &usbh_ohci_data,
+	},
+	.resource	= usbh_ohci_resources,
+	.num_resources	= ARRAY_SIZE(usbh_ohci_resources),
+};
+
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
+{
+	int i;
+
+	if (!data)
+		return;
+
+	/* Enable VBus control for UHP ports */
+	for (i = 0; i < data->ports; i++) {
+		if (data->vbus_pin[i])
+			at91_set_gpio_output(data->vbus_pin[i], 0);
+	}
+
+	usbh_ohci_data = *data;
+	platform_device_register(&at91_usbh_ohci_device);
+}
+#else
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+static struct resource usba_udc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_UDPHS_FIFO,
+		.end	= AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_BASE_UDPHS,
+		.end	= AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= AT91SAM9G45_ID_UDPHS,
+		.end	= AT91SAM9G45_ID_UDPHS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
+	[idx] = {						\
+		.name		= nam,				\
+		.index		= idx,				\
+		.fifo_size	= maxpkt,			\
+		.nr_banks	= maxbk,			\
+		.can_dma	= dma,				\
+		.can_isoc	= isoc,				\
+	}
+
+static struct usba_ep_data usba_udc_ep[] __initdata = {
+	EP("ep0", 0, 64, 1, 0, 0),
+	EP("ep1", 1, 1024, 2, 1, 1),
+	EP("ep2", 2, 1024, 2, 1, 1),
+	EP("ep3", 3, 1024, 3, 1, 0),
+	EP("ep4", 4, 1024, 3, 1, 0),
+	EP("ep5", 5, 1024, 3, 1, 1),
+	EP("ep6", 6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+	struct usba_platform_data pdata;
+	struct usba_ep_data ep[7];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+	.name		= "atmel_usba_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &usba_udc_data.pdata,
+	},
+	.resource	= usba_udc_resources,
+	.num_resources	= ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+	usba_udc_data.pdata.vbus_pin = -EINVAL;
+	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+	if (data && data->vbus_pin > 0) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+	}
+
+	/* Pullup pin is handled internally by USB device peripheral */
+
+	/* Clocks */
+	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+	platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_EMAC,
+		.end	= AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_EMAC,
+		.end	= AT91SAM9G45_ID_EMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_eth_device = {
+	.name		= "macb",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &eth_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &eth_data,
+	},
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->phy_irq_pin) {
+		at91_set_gpio_input(data->phy_irq_pin, 0);
+		at91_set_deglitch(data->phy_irq_pin, 1);
+	}
+
+	/* Pins used for MII and RMII */
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ETXCK_EREFCK */
+	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* EMDC */
+
+	if (!data->is_rmii) {
+		at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECRS */
+		at91_set_B_periph(AT91_PIN_PA30, 0);	/* ECOL */
+		at91_set_B_periph(AT91_PIN_PA8,  0);	/* ERX2 */
+		at91_set_B_periph(AT91_PIN_PA9,  0);	/* ERX3 */
+		at91_set_B_periph(AT91_PIN_PA28, 0);	/* ERXCK */
+		at91_set_B_periph(AT91_PIN_PA6,  0);	/* ETX2 */
+		at91_set_B_periph(AT91_PIN_PA7,  0);	/* ETX3 */
+		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ETXER */
+	}
+
+	eth_data = *data;
+	platform_device_register(&at91sam9g45_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	[0] = {
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_BASE_SYS + AT91_ECC,
+		.end	= AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9g45_nand_device = {
+	.name		= "atmel_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct atmel_nand_data *data)
+{
+	unsigned long csa;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	nand_data = *data;
+	platform_device_register(&at91sam9g45_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+static struct i2c_gpio_platform_data pdata_i2c0 = {
+	.sda_pin		= AT91_PIN_PA20,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PA21,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at91sam9g45_twi0_device = {
+	.name			= "i2c-gpio",
+	.id			= 0,
+	.dev.platform_data	= &pdata_i2c0,
+};
+
+static struct i2c_gpio_platform_data pdata_i2c1 = {
+	.sda_pin		= AT91_PIN_PB10,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PB11,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at91sam9g45_twi1_device = {
+	.name			= "i2c-gpio",
+	.id			= 1,
+	.dev.platform_data	= &pdata_i2c1,
+};
+
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	i2c_register_board_info(i2c_id, devices, nr_devices);
+
+	if (i2c_id == 0) {
+		at91_set_GPIO_periph(AT91_PIN_PA20, 1);		/* TWD (SDA) */
+		at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+		at91_set_GPIO_periph(AT91_PIN_PA21, 1);		/* TWCK (SCL) */
+		at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+		platform_device_register(&at91sam9g45_twi0_device);
+	} else {
+		at91_set_GPIO_periph(AT91_PIN_PB10, 1);		/* TWD (SDA) */
+		at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+		at91_set_GPIO_periph(AT91_PIN_PB11, 1);		/* TWCK (SCL) */
+		at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+		platform_device_register(&at91sam9g45_twi1_device);
+	}
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+static struct resource twi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TWI0,
+		.end	= AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TWI0,
+		.end	= AT91SAM9G45_ID_TWI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_twi0_device = {
+	.name		= "at91_i2c",
+	.id		= 0,
+	.resource	= twi0_resources,
+	.num_resources	= ARRAY_SIZE(twi0_resources),
+};
+
+static struct resource twi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TWI1,
+		.end	= AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TWI1,
+		.end	= AT91SAM9G45_ID_TWI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_twi1_device = {
+	.name		= "at91_i2c",
+	.id		= 1,
+	.resource	= twi1_resources,
+	.num_resources	= ARRAY_SIZE(twi1_resources),
+};
+
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	i2c_register_board_info(i2c_id, devices, nr_devices);
+
+	/* pins used for TWI interface */
+	if (i2c_id == 0) {
+		at91_set_A_periph(AT91_PIN_PA20, 0);		/* TWD */
+		at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+		at91_set_A_periph(AT91_PIN_PA21, 0);		/* TWCK */
+		at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+		platform_device_register(&at91sam9g45_twi0_device);
+	} else {
+		at91_set_A_periph(AT91_PIN_PB10, 0);		/* TWD */
+		at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+		at91_set_A_periph(AT91_PIN_PB11, 0);		/* TWCK */
+		at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+		platform_device_register(&at91sam9g45_twi1_device);
+	}
+}
+#else
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SPI0,
+		.end	= AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SPI0,
+		.end	= AT91SAM9G45_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SPI1,
+		.end	= AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SPI1,
+		.end	= AT91SAM9G45_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI0_MISO */
+		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI0_MOSI */
+		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI0_SPCK */
+
+		at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk");
+		platform_device_register(&at91sam9g45_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB15, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB16, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk");
+		platform_device_register(&at91sam9g45_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_LCDC_BASE,
+		.end	= AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_LCDC,
+		.end	= AT91SAM9G45_ID_LCDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_lcdc_device = {
+	.name		= "atmel_lcdfb",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &lcdc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &lcdc_data,
+	},
+	.resource	= lcdc_resources,
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PE0, 0);	/* LCDDPWR */
+
+	at91_set_A_periph(AT91_PIN_PE2, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PE3, 0);	/* LCDVSYNC */
+	at91_set_A_periph(AT91_PIN_PE4, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PE5, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PE6, 0);	/* LCDDEN */
+	at91_set_A_periph(AT91_PIN_PE7, 0);	/* LCDD0 */
+	at91_set_A_periph(AT91_PIN_PE8, 0);	/* LCDD1 */
+	at91_set_A_periph(AT91_PIN_PE9, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PE10, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PE11, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PE12, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PE13, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PE14, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PE15, 0);	/* LCDD8 */
+	at91_set_A_periph(AT91_PIN_PE16, 0);	/* LCDD9 */
+	at91_set_A_periph(AT91_PIN_PE17, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PE18, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PE19, 0);	/* LCDD12 */
+	at91_set_A_periph(AT91_PIN_PE20, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PE21, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PE22, 0);	/* LCDD15 */
+	at91_set_A_periph(AT91_PIN_PE23, 0);	/* LCDD16 */
+	at91_set_A_periph(AT91_PIN_PE24, 0);	/* LCDD17 */
+	at91_set_A_periph(AT91_PIN_PE25, 0);	/* LCDD18 */
+	at91_set_A_periph(AT91_PIN_PE26, 0);	/* LCDD19 */
+	at91_set_A_periph(AT91_PIN_PE27, 0);	/* LCDD20 */
+	at91_set_A_periph(AT91_PIN_PE28, 0);	/* LCDD21 */
+	at91_set_A_periph(AT91_PIN_PE29, 0);	/* LCDD22 */
+	at91_set_A_periph(AT91_PIN_PE30, 0);	/* LCDD23 */
+
+	lcdc_data = *data;
+	platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+static struct resource tcb0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TCB0,
+		.end	= AT91SAM9G45_BASE_TCB0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TCB,
+		.end	= AT91SAM9G45_ID_TCB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_tcb0_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= tcb0_resources,
+	.num_resources	= ARRAY_SIZE(tcb0_resources),
+};
+
+/* TCB1 begins with TC3 */
+static struct resource tcb1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TCB1,
+		.end	= AT91SAM9G45_BASE_TCB1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TCB,
+		.end	= AT91SAM9G45_ID_TCB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_tcb1_device = {
+	.name		= "atmel_tcb",
+	.id		= 1,
+	.resource	= tcb1_resources,
+	.num_resources	= ARRAY_SIZE(tcb1_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+	/* this chip has one clock and irq for all six TC channels */
+	at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
+	platform_device_register(&at91sam9g45_tcb0_device);
+	at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
+	platform_device_register(&at91sam9g45_tcb1_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  RTC
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct platform_device at91sam9g45_rtc_device = {
+	.name		= "at91_rtc",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static void __init at91_add_device_rtc(void)
+{
+	platform_device_register(&at91sam9g45_rtc_device);
+}
+#else
+static void __init at91_add_device_rtc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+	{
+		.start	= AT91_BASE_SYS + AT91_RTT,
+		.end	= AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9g45_rtt_device = {
+	.name		= "at91_rtt",
+	.id		= 0,
+	.resource	= rtt_resources,
+	.num_resources	= ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+	platform_device_register(&at91sam9g45_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ *  Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9g45_wdt_device = {
+	.name		= "at91_wdt",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+	platform_device_register(&at91sam9g45_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_PWMC,
+		.end	= AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_PWMC,
+		.end	= AT91SAM9G45_ID_PWMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_pwm0_device = {
+	.name	= "atmel_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &pwm_mask,
+	},
+	.resource	= pwm_resources,
+	.num_resources	= ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+	if (mask & (1 << AT91_PWM0))
+		at91_set_B_periph(AT91_PIN_PD24, 1);	/* enable PWM0 */
+
+	if (mask & (1 << AT91_PWM1))
+		at91_set_B_periph(AT91_PIN_PD31, 1);	/* enable PWM1 */
+
+	if (mask & (1 << AT91_PWM2))
+		at91_set_B_periph(AT91_PIN_PD26, 1);	/* enable PWM2 */
+
+	if (mask & (1 << AT91_PWM3))
+		at91_set_B_periph(AT91_PIN_PD0, 1);	/* enable PWM3 */
+
+	pwm_mask = mask;
+
+	platform_device_register(&at91sam9g45_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SSC0,
+		.end	= AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SSC0,
+		.end	= AT91SAM9G45_ID_SSC0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_ssc0_device = {
+	.name	= "ssc",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ssc0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= ssc0_resources,
+	.num_resources	= ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+	if (pins & ATMEL_SSC_TF)
+		at91_set_A_periph(AT91_PIN_PD1, 1);
+	if (pins & ATMEL_SSC_TK)
+		at91_set_A_periph(AT91_PIN_PD0, 1);
+	if (pins & ATMEL_SSC_TD)
+		at91_set_A_periph(AT91_PIN_PD2, 1);
+	if (pins & ATMEL_SSC_RD)
+		at91_set_A_periph(AT91_PIN_PD3, 1);
+	if (pins & ATMEL_SSC_RK)
+		at91_set_A_periph(AT91_PIN_PD4, 1);
+	if (pins & ATMEL_SSC_RF)
+		at91_set_A_periph(AT91_PIN_PD5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SSC1,
+		.end	= AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SSC1,
+		.end	= AT91SAM9G45_ID_SSC1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_ssc1_device = {
+	.name	= "ssc",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ssc1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= ssc1_resources,
+	.num_resources	= ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+	if (pins & ATMEL_SSC_TF)
+		at91_set_A_periph(AT91_PIN_PD14, 1);
+	if (pins & ATMEL_SSC_TK)
+		at91_set_A_periph(AT91_PIN_PD12, 1);
+	if (pins & ATMEL_SSC_TD)
+		at91_set_A_periph(AT91_PIN_PD10, 1);
+	if (pins & ATMEL_SSC_RD)
+		at91_set_A_periph(AT91_PIN_PD11, 1);
+	if (pins & ATMEL_SSC_RK)
+		at91_set_A_periph(AT91_PIN_PD13, 1);
+	if (pins & ATMEL_SSC_RF)
+		at91_set_A_periph(AT91_PIN_PD15, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver.  For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+	struct platform_device *pdev;
+
+	/*
+	 * NOTE: caller is responsible for passing information matching
+	 * "pins" to whatever will be using each particular controller.
+	 */
+	switch (id) {
+	case AT91SAM9G45_ID_SSC0:
+		pdev = &at91sam9g45_ssc0_device;
+		configure_ssc0_pins(pins);
+		at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+		break;
+	case AT91SAM9G45_ID_SSC1:
+		pdev = &at91sam9g45_ssc1_device;
+		configure_ssc1_pins(pins);
+		at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+		break;
+	default:
+		return;
+	}
+
+	platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &dbgu_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &dbgu_data,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB12, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PB13, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US0,
+		.end	= AT91SAM9G45_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US0,
+		.end	= AT91SAM9G45_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &uart0_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart0_data,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB19, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PB18, 0);		/* RXD0 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PB17, 0);	/* RTS0 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PB15, 0);	/* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US1,
+		.end	= AT91SAM9G45_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US1,
+		.end	= AT91SAM9G45_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.dma_mask		= &uart1_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart1_data,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD1 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_A_periph(AT91_PIN_PD16, 0);	/* RTS1 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_A_periph(AT91_PIN_PD17, 0);	/* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US2,
+		.end	= AT91SAM9G45_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US2,
+		.end	= AT91SAM9G45_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.dma_mask		= &uart2_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart2_data,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD2 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PC9, 0);	/* RTS2 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PC11, 0);	/* CTS2 */
+}
+
+static struct resource uart3_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US3,
+		.end	= AT91SAM9G45_BASE_US3 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US3,
+		.end	= AT91SAM9G45_ID_US3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart3_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart3_device = {
+	.name		= "atmel_usart",
+	.id		= 4,
+	.dev		= {
+				.dma_mask		= &uart3_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart3_data,
+	},
+	.resource	= uart3_resources,
+	.num_resources	= ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD3 */
+	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD3 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PA23, 0);	/* RTS3 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PA24, 0);	/* CTS3 */
+}
+
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+		case 0:		/* DBGU */
+			pdev = &at91sam9g45_dbgu_device;
+			configure_dbgu_pins();
+			at91_clock_associate("mck", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US0:
+			pdev = &at91sam9g45_uart0_device;
+			configure_usart0_pins(pins);
+			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US1:
+			pdev = &at91sam9g45_uart1_device;
+			configure_usart1_pins(pins);
+			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US2:
+			pdev = &at91sam9g45_uart2_device;
+			configure_usart2_pins(pins);
+			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US3:
+			pdev = &at91sam9g45_uart3_device;
+			configure_usart3_pins(pins);
+			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+			break;
+		default:
+			return;
+	}
+	pdev->id = portnr;		/* update to mapped ID */
+
+	if (portnr < ATMEL_MAX_UART)
+		at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+	if (portnr < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[portnr];
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	at91_add_device_rtc();
+	at91_add_device_rtt();
+	at91_add_device_watchdog();
+	at91_add_device_tc();
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
new file mode 100644
index 00000000000..b8558eae522
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -0,0 +1,389 @@
+/*
+ *  Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family
+ *
+ *  Covers: * AT91SAM9G45-EKES  board
+ *          * AT91SAM9M10G45-EK board
+ *
+ *  Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 12.000 MHz crystal */
+	at91sam9g45_initialize(12000000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 not connected on the -EK board */
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9g45_init_interrupts(NULL);
+}
+
+
+/*
+ * USB HS Host port (common to OHCI & EHCI)
+ */
+static struct at91_usbh_data __initdata ek_usbh_hs_data = {
+	.ports		= 2,
+	.vbus_pin	= {AT91_PIN_PD1, AT91_PIN_PD3},
+};
+
+
+/*
+ * USB HS Device port
+ */
+static struct usba_platform_data __initdata ek_usba_udc_data = {
+	.vbus_pin	= AT91_PIN_PB19,
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PD5,
+	.is_rmii	= 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= SZ_64M,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC8,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (ek_nand_data.bus_width_16)
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+	{
+		.name           = "LG",
+		.refresh	= 60,
+		.xres		= 480,		.yres		= 272,
+		.pixclock	= KHZ2PICOS(9000),
+
+		.left_margin	= 1,		.right_margin	= 1,
+		.upper_margin	= 40,		.lower_margin	= 1,
+		.hsync_len	= 45,		.vsync_len	= 1,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+	.manufacturer	= "LG",
+	.monitor        = "LB043WQ1",
+
+	.modedb		= at91_tft_vga_modes,
+	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
+	.hfmin		= 15000,
+	.hfmax		= 17640,
+	.vfmin		= 57,
+	.vfmax		= 67,
+};
+
+#define AT91SAM9G45_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
+					| ATMEL_LCDC_DISTYPE_TFT \
+					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.lcdcon_is_backlight		= true,
+	.default_bpp			= 32,
+	.default_dmacon			= ATMEL_LCDC_DMAEN,
+	.default_lcdcon2		= AT91SAM9G45_DEFAULT_LCDCON2,
+	.default_monspecs		= &at91fb_default_monspecs,
+	.guard_time			= 9,
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{	/* BP1, "leftclic" */
+		.code		= BTN_LEFT,
+		.gpio		= AT91_PIN_PB6,
+		.active_low	= 1,
+		.desc		= "left_click",
+		.wakeup		= 1,
+	},
+	{	/* BP2, "rightclic" */
+		.code		= BTN_RIGHT,
+		.gpio		= AT91_PIN_PB7,
+		.active_low	= 1,
+		.desc		= "right_click",
+		.wakeup		= 1,
+	},
+		/* BP3, "joystick" */
+	{
+		.code		= KEY_LEFT,
+		.gpio		= AT91_PIN_PB14,
+		.active_low	= 1,
+		.desc		= "Joystick Left",
+	},
+	{
+		.code		= KEY_RIGHT,
+		.gpio		= AT91_PIN_PB15,
+		.active_low	= 1,
+		.desc		= "Joystick Right",
+	},
+	{
+		.code		= KEY_UP,
+		.gpio		= AT91_PIN_PB16,
+		.active_low	= 1,
+		.desc		= "Joystick Up",
+	},
+	{
+		.code		= KEY_DOWN,
+		.gpio		= AT91_PIN_PB17,
+		.active_low	= 1,
+		.desc		= "Joystick Down",
+	},
+	{
+		.code		= KEY_ENTER,
+		.gpio		= AT91_PIN_PB18,
+		.active_low	= 1,
+		.desc		= "Joystick Press",
+	},
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) {
+		at91_set_GPIO_periph(ek_buttons[i].gpio, 1);
+		at91_set_deglitch(ek_buttons[i].gpio, 1);
+	}
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
+/*
+ * LEDs ... these could all be PWM-driven, for variable brightness
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* "top" led, red, powerled */
+		.name			= "d8",
+		.gpio			= AT91_PIN_PD30,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* "left" led, green, userled2, pwm3 */
+		.name			= "d6",
+		.gpio			= AT91_PIN_PD0,
+		.active_low		= 1,
+		.default_trigger	= "nand-disk",
+	},
+#if !(defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE))
+	{	/* "right" led, green, userled1, pwm1 */
+		.name			= "d7",
+		.gpio			= AT91_PIN_PD31,
+		.active_low		= 1,
+		.default_trigger	= "mmc0",
+	},
+#endif
+};
+
+
+/*
+ * PWM Leds
+ */
+static struct gpio_led ek_pwm_led[] = {
+#if defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE)
+	{	/* "right" led, green, userled1, pwm1 */
+		.name			= "d7",
+		.gpio			= 1,	/* is PWM channel number */
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+#endif
+};
+
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB HS Host */
+	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+	/* USB HS Device */
+	at91_add_device_usba(&ek_usba_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
+	/* NAND */
+	ek_add_device_nand();
+	/* I2C */
+	at91_add_device_i2c(0, NULL, 0);
+	/* LCD Controller */
+	at91_add_device_lcdc(&ek_lcdc_data);
+	/* Push Buttons */
+	ek_add_device_buttons();
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+}
+
+MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index b5daf7f5e01..88e413b3848 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -14,6 +14,7 @@ extern void __init at91sam9260_initialize(unsigned long main_clock);
 extern void __init at91sam9261_initialize(unsigned long main_clock);
 extern void __init at91sam9263_initialize(unsigned long main_clock);
 extern void __init at91sam9rl_initialize(unsigned long main_clock);
+extern void __init at91sam9g45_initialize(unsigned long main_clock);
 extern void __init at91x40_initialize(unsigned long main_clock);
 extern void __init at91cap9_initialize(unsigned long main_clock);
 
@@ -23,6 +24,7 @@ extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
 extern void __init at91x40_init_interrupts(unsigned int priority[]);
 extern void __init at91cap9_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index e6afff849b8..74801d275cd 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -80,7 +80,8 @@ struct at91_eth_data {
 };
 extern void __init at91_add_device_eth(struct at91_eth_data *data);
 
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 #define eth_platform_data	at91_eth_data
 #endif
 
@@ -90,6 +91,7 @@ struct at91_usbh_data {
 	u8		vbus_pin[2];	/* port power-control pin */
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
 
  /* NAND / SmartMedia */
 struct atmel_nand_data {
@@ -105,7 +107,11 @@ struct atmel_nand_data {
 extern void __init at91_add_device_nand(struct atmel_nand_data *data);
 
  /* I2C*/
+#if defined(CONFIG_ARCH_AT91SAM9G45)
+extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
+#else
 extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
+#endif
 
  /* SPI */
 extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c155bd3ec9f..f053ba5c37b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -209,7 +209,7 @@ config MII
 
 config MACB
 	tristate "Atmel MACB support"
-	depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91CAP9
+	depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45 || ARCH_AT91CAP9
 	select PHYLIB
 	help
 	  The Atmel MACB ethernet interface is found on many AT32 and AT91
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index d6d65ef85f5..36281823fe5 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -933,7 +933,7 @@ config FB_S1D13XXX
 
 config FB_ATMEL
 	tristate "AT91/AT32 LCD Controller support"
-	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
+	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-- 
GitLab


From eab4170865cce9b8898a813b7e8024de857a01da Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:37:00 +0100
Subject: [PATCH 009/257] [ARM] 5567/1: at91: Support for at91sam9g10: clocks
 management

From: Hong Xu <hong.xu@atmel.com>

Add the at91sam9g10 support to the AT91 generic clock file. It takes
advantage of the management by functionalities of those PLLs and clocks.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/clock.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 6396680271e..c042dcf4725 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -53,7 +53,7 @@
 #define cpu_has_800M_plla()	(  cpu_is_at91sam9g20() \
 				|| cpu_is_at91sam9g45())
 
-#define cpu_has_300M_plla()	(0)
+#define cpu_has_300M_plla()	(cpu_is_at91sam9g10())
 
 #define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
 				|| cpu_is_at91sam9g45()))
@@ -626,7 +626,9 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
 		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
+		   cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
+		   cpu_is_at91sam9g10()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
 	} else if (cpu_is_at91cap9()) {
-- 
GitLab


From b784b7c03723891876c9053c589150a4062f9455 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:59 +0100
Subject: [PATCH 010/257] [ARM] 5568/1: at91: Basic support for at91sam9g10:
 header files

From: Hong Xu <hong.xu@atmel.com>

AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.

Here is the basic header file support for this product.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/include/mach/at91sam9261.h | 3 +++
 arch/arm/mach-at91/include/mach/cpu.h         | 7 +++++++
 arch/arm/mach-at91/include/mach/hardware.h    | 2 +-
 arch/arm/mach-at91/include/mach/timex.h       | 5 +++++
 4 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 3a348ca2077..87de8be1748 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -95,6 +95,9 @@
 #define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
 #define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
 
+#define AT91SAM9G10_SRAM_BASE	AT91SAM9261_SRAM_BASE	/* Internal SRAM base address */
+#define AT91SAM9G10_SRAM_SIZE	0x00004000	/* Internal SRAM size (16Kb) */
+
 #define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
 #define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
 
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index b73e7bf097d..34a9502c48b 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -21,6 +21,7 @@
 #define ARCH_ID_AT91SAM9260	0x019803a0
 #define ARCH_ID_AT91SAM9261	0x019703a0
 #define ARCH_ID_AT91SAM9263	0x019607a0
+#define ARCH_ID_AT91SAM9G10	0x819903a0
 #define ARCH_ID_AT91SAM9G20	0x019905a0
 #define ARCH_ID_AT91SAM9RL64	0x019b03a0
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
@@ -97,6 +98,12 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91sam9261()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9G10
+#define cpu_is_at91sam9g10()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G10)
+#else
+#define cpu_is_at91sam9g10()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_AT91SAM9263
 #define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
 #else
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index f0869170fa0..a0df8b022df 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -20,7 +20,7 @@
 #include <mach/at91rm9200.h>
 #elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
 #include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
+#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
 #include <mach/at91sam9261.h>
 #elif defined(CONFIG_ARCH_AT91SAM9263)
 #include <mach/at91sam9263.h>
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 38f6c4250c7..31ac2d97f14 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -42,6 +42,11 @@
 #define AT91SAM9_MASTER_CLOCK	99300000
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
+#elif defined(CONFIG_ARCH_AT91SAM9G10)
+
+#define AT91SAM9_MASTER_CLOCK	133000000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
 #elif defined(CONFIG_ARCH_AT91SAM9263)
 
 #if defined(CONFIG_MACH_USB_A9263)
-- 
GitLab


From b319ff80852e823c3a18778c839151784990f80b Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:37:01 +0100
Subject: [PATCH 011/257] [ARM] 5570/1: at91: Support for at91sam9g10: core
 chip & board support

From: Hong Xu <hong.xu@atmel.com>

Here are the modification to at91sam9261 files dedicated to the support of
at91sam9g10. This direction has been adopted to minimize code duplication.

All at91sam9261 drivers are enabled in _devices and board- files. Modificaton
to peripherals that support at91sam9g10 will be added in future patches.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/Kconfig           | 25 +++++++++++++++++++++++--
 arch/arm/mach-at91/Makefile          |  2 ++
 arch/arm/mach-at91/at91sam9261.c     | 22 +++++++++++++++++++++-
 arch/arm/mach-at91/board-sam9261ek.c | 14 ++++++++++++++
 arch/arm/mach-at91/pm.c              |  3 ++-
 5 files changed, 62 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 22309ba97fa..8f3e15abdb6 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -23,6 +23,12 @@ config ARCH_AT91SAM9261
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
+config ARCH_AT91SAM9G10
+	bool "AT91SAM9G10"
+	select CPU_ARM926T
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select CPU_ARM926T
@@ -230,6 +236,21 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9G10
+	help
+	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91SAM9263
 
 comment "AT91SAM9263 Board Type"
@@ -337,13 +358,13 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 2975f9ab861..4eaf80abe10 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o  sam9_smc.o
@@ -44,6 +45,7 @@ obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
 
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 3acd7d7e6a4..4ecf37996c7 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -16,6 +16,7 @@
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <mach/cpu.h>
 #include <mach/at91sam9261.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
@@ -30,7 +31,11 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
-	}, {
+	},
+};
+
+static struct map_desc at91sam9261_sram_desc[] __initdata = {
+	{
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
 		.pfn		= __phys_to_pfn(AT91SAM9261_SRAM_BASE),
 		.length		= AT91SAM9261_SRAM_SIZE,
@@ -38,6 +43,15 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
 	},
 };
 
+static struct map_desc at91sam9g10_sram_desc[] __initdata = {
+	{
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9G10_SRAM_BASE),
+		.length		= AT91SAM9G10_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
 /* --------------------------------------------------------------------
  *  Clocks
  * -------------------------------------------------------------------- */
@@ -263,6 +277,12 @@ void __init at91sam9261_initialize(unsigned long main_clock)
 	/* Map peripherals */
 	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
 
+	if (cpu_is_at91sam9g10())
+		iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
+	else
+		iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
+
+
 	at91_arch_reset = at91sam9261_reset;
 	pm_power_off = at91sam9261_poweroff;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index d5266da5531..f9b19993a7a 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -287,7 +287,11 @@ static void __init ek_add_device_ts(void) {}
  */
 static struct at73c213_board_info at73c213_data = {
 	.ssc_id		= 1,
+#if defined(CONFIG_MACH_AT91SAM9261EK)
 	.shortname	= "AT91SAM9261-EK external DAC",
+#else
+	.shortname	= "AT91SAM9G10-EK external DAC",
+#endif
 };
 
 #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
@@ -414,6 +418,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_stn_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_stn_power_control,
 	.guard_time			= 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+#endif
 };
 
 #else
@@ -467,6 +474,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_tft_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_tft_power_control,
 	.guard_time			= 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+#endif
 };
 #endif
 
@@ -600,7 +610,11 @@ static void __init ek_board_init(void)
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
+#if defined(CONFIG_MACH_AT91SAM9261EK)
 MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+#else
+MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
+#endif
 	/* Maintainer: Atmel */
 	.phys_io	= AT91_BASE_SYS,
 	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e26c4fe61fa..4028724d490 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -201,7 +201,8 @@ static int at91_pm_verify_clocks(void)
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
 		}
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()
+			|| cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) {
 		if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
-- 
GitLab


From 87e8824b4588076409692b82ef4b1d98f25cd400 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:28:41 +0100
Subject: [PATCH 012/257] [ARM] 5582/1: VIC: support ST-modified version with a
 split init

The Nomadik SoC (not yet merged) has a modified PL090 VIC cell. This adds
support for it by reading the PrimeCell ID at the end of the page and
calling a separate init function.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c | 88 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 6ed89836e90..27714ab30f2 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -259,6 +259,15 @@ static struct irq_chip vic_chip = {
 	.set_wake = vic_set_wake,
 };
 
+/* The PL190 cell from ARM has been modified by ST, so handle both here */
+static void vik_init_st(void __iomem *base, unsigned int irq_start,
+			 u32 vic_sources);
+
+enum vic_vendor {
+	VENDOR_ARM = 0x41,
+	VENDOR_ST = 0x80,
+};
+
 /**
  * vic_init - initialise a vectored interrupt controller
  * @base: iomem base address
@@ -270,6 +279,28 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		     u32 vic_sources, u32 resume_sources)
 {
 	unsigned int i;
+	u32 cellid = 0;
+	enum vic_vendor vendor;
+
+	/* Identify which VIC cell this one is, by reading the ID */
+	for (i = 0; i < 4; i++) {
+		u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+		cellid |= (readl(addr) & 0xff) << (8 * i);
+	}
+	vendor = (cellid >> 12) & 0xff;
+	printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+	       base, cellid, vendor);
+
+	switch(vendor) {
+	case VENDOR_ST:
+		vik_init_st(base, irq_start, vic_sources);
+		return;
+	default:
+		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+		/* fall through */
+	case VENDOR_ARM:
+		break;
+	}
 
 	/* Disable all interrupts initially. */
 
@@ -306,3 +337,60 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
 	vic_pm_register(base, irq_start, resume_sources);
 }
+
+/*
+ * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
+ * The original cell has 32 interrupts, while the modified one has 64,
+ * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
+ * the probe function is called twice, with base set to offset 000
+ *  and 020 within the page. We call this "second block".
+ */
+static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+				u32 vic_sources)
+{
+	unsigned int i;
+	int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
+
+	/* Disable all interrupts initially. */
+
+	writel(0, base + VIC_INT_SELECT);
+	writel(0, base + VIC_INT_ENABLE);
+	writel(~0, base + VIC_INT_ENABLE_CLEAR);
+	writel(0, base + VIC_IRQ_STATUS);
+	writel(0, base + VIC_ITCR);
+	writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+	/*
+	 * Make sure we clear all existing interrupts. The vector registers
+	 * in this cell are after the second block of general registers,
+	 * so we can address them using standard offsets, but only from
+	 * the second base address, which is 0x20 in the page
+	 */
+	if (vic_2nd_block) {
+		writel(0, base + VIC_PL190_VECT_ADDR);
+		for (i = 0; i < 19; i++) {
+			unsigned int value;
+
+			value = readl(base + VIC_PL190_VECT_ADDR);
+			writel(value, base + VIC_PL190_VECT_ADDR);
+		}
+		/* ST has 16 vectors as well, but we don't enable them by now */
+		for (i = 0; i < 16; i++) {
+			void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+			writel(0, reg);
+		}
+
+		writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+	}
+
+	for (i = 0; i < 32; i++) {
+		if (vic_sources & (1 << i)) {
+			unsigned int irq = irq_start + i;
+
+			set_irq_chip(irq, &vic_chip);
+			set_irq_chip_data(irq, base);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+}
-- 
GitLab


From 8c81b52422147b4b09f5adb8d0c6963342a336c6 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:28:52 +0100
Subject: [PATCH 013/257] [ARM] 5583/1: VIC: acknowledge software interrupts

The PrimeCell Vectored Interrupt Controller offers a way to trigger
any interrupt through software. This is a useful tool for developing,
but such software interrupt can only be acked by writing a bit in the
"software clear" register, or the handler will loop forever.  This
splits ack from mask, and acks the soft irq in case it was the source.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 27714ab30f2..bc1f9ad61ff 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -26,6 +26,15 @@
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
+static void vic_ack_irq(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	irq &= 31;
+	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+	/* moreover, clear the soft-triggered, in case it was the reason */
+	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
 static void vic_mask_irq(unsigned int irq)
 {
 	void __iomem *base = get_irq_chip_data(irq);
@@ -253,7 +262,7 @@ static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg
 
 static struct irq_chip vic_chip = {
 	.name	= "VIC",
-	.ack	= vic_mask_irq,
+	.ack	= vic_ack_irq,
 	.mask	= vic_mask_irq,
 	.unmask	= vic_unmask_irq,
 	.set_wake = vic_set_wake,
-- 
GitLab


From 28ad94ec61dc60207dbffdb95ff870c617fbb832 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 19:06:47 +0100
Subject: [PATCH 014/257] [ARM] 5590/1: Add basic support for ST Nomadik 8815
 SoC and evaluation board

This patch adds the basic infrastructure for the Nomadik 8815
CPU and the "Nomadik Hardware Kit" NHK8815. This patch only
includes the serial console and core stuff, no drivers.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                              |  15 ++
 arch/arm/Makefile                             |   1 +
 arch/arm/mach-nomadik/Kconfig                 |  14 ++
 arch/arm/mach-nomadik/Makefile                |  16 ++
 arch/arm/mach-nomadik/Makefile.boot           |   4 +
 arch/arm/mach-nomadik/board-nhk8815.c         |  75 ++++++++
 arch/arm/mach-nomadik/clock.c                 |  45 +++++
 arch/arm/mach-nomadik/clock.h                 |  14 ++
 arch/arm/mach-nomadik/cpu-8815.c              |  58 +++++++
 arch/arm/mach-nomadik/include/mach/clkdev.h   |   7 +
 .../mach-nomadik/include/mach/debug-macro.S   |  22 +++
 .../mach-nomadik/include/mach/entry-macro.S   |  43 +++++
 arch/arm/mach-nomadik/include/mach/hardware.h |  90 ++++++++++
 arch/arm/mach-nomadik/include/mach/io.h       |  22 +++
 arch/arm/mach-nomadik/include/mach/irqs.h     |  82 +++++++++
 arch/arm/mach-nomadik/include/mach/memory.h   |  28 +++
 arch/arm/mach-nomadik/include/mach/mtu.h      |  45 +++++
 arch/arm/mach-nomadik/include/mach/setup.h    |  22 +++
 arch/arm/mach-nomadik/include/mach/system.h   |  45 +++++
 arch/arm/mach-nomadik/include/mach/timex.h    |   6 +
 .../mach-nomadik/include/mach/uncompress.h    |  63 +++++++
 arch/arm/mach-nomadik/include/mach/vmalloc.h  |   2 +
 arch/arm/mach-nomadik/timer.c                 | 164 ++++++++++++++++++
 23 files changed, 883 insertions(+)
 create mode 100644 arch/arm/mach-nomadik/Kconfig
 create mode 100644 arch/arm/mach-nomadik/Makefile
 create mode 100644 arch/arm/mach-nomadik/Makefile.boot
 create mode 100644 arch/arm/mach-nomadik/board-nhk8815.c
 create mode 100644 arch/arm/mach-nomadik/clock.c
 create mode 100644 arch/arm/mach-nomadik/clock.h
 create mode 100644 arch/arm/mach-nomadik/cpu-8815.c
 create mode 100644 arch/arm/mach-nomadik/include/mach/clkdev.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-nomadik/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-nomadik/include/mach/hardware.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/io.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/irqs.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/memory.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/mtu.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/setup.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/system.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/timex.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/uncompress.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/vmalloc.h
 create mode 100644 arch/arm/mach-nomadik/timer.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..d8cfd706501 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -327,6 +327,19 @@ config ARCH_H720X
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
+config ARCH_NOMADIK
+	bool "STMicroelectronics Nomadik"
+	select ARM_AMBA
+	select ARM_VIC
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
+	help
+	  Support for the Nomadik platform by ST-Ericsson
+
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -716,6 +729,8 @@ source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/plat-mxc/Kconfig"
 
+source "arch/arm/mach-nomadik/Kconfig"
+
 source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-ns9xxx/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..97cca075d0f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -137,6 +137,7 @@ machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_NETX)		:= netx
+machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
 machine-$(CONFIG_ARCH_OMAP1)		:= omap1
 machine-$(CONFIG_ARCH_OMAP2)		:= omap2
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
new file mode 100644
index 00000000000..abce2346106
--- /dev/null
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -0,0 +1,14 @@
+if ARCH_NOMADIK
+
+menu "Nomadik boards"
+
+config MACH_NOMADIK_8815NHK
+	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
+	select NOMADIK_8815
+
+endmenu
+
+config NOMADIK_8815
+	bool
+
+endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
new file mode 100644
index 00000000000..fa97769fe70
--- /dev/null
+++ b/arch/arm/mach-nomadik/Makefile
@@ -0,0 +1,16 @@
+#
+# Makefile for the linux kernel.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+
+# Object file lists.
+
+obj-y			+= clock.o timer.o
+
+# Cpu revision
+obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
+
+# Specific board support
+obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
diff --git a/arch/arm/mach-nomadik/Makefile.boot b/arch/arm/mach-nomadik/Makefile.boot
new file mode 100644
index 00000000000..c7e75acfe6c
--- /dev/null
+++ b/arch/arm/mach-nomadik/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
new file mode 100644
index 00000000000..eebca614d36
--- /dev/null
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -0,0 +1,75 @@
+/*
+ *  linux/arch/arm/mach-nomadik/board-8815nhk.c
+ *
+ *  Copyright (C) STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ *  NHK15 board specifc driver definition
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/setup.h>
+#include "clock.h"
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+static struct amba_device uart0_device = {
+	.dev = { .init_name = "uart0" },
+	__MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
+	.irq = {IRQ_UART0, NO_IRQ},
+};
+
+static struct amba_device uart1_device = {
+	.dev = { .init_name = "uart1" },
+	__MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
+	.irq = {IRQ_UART1, NO_IRQ},
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uart0_device,
+	&uart1_device,
+};
+
+/* We have a fixed clock alone, by now */
+static struct clk nhk8815_clk_48 = {
+	.rate = 48*1000*1000,
+};
+
+static struct platform_device *nhk8815_platform_devices[] __initdata = {
+	/* currently empty, will add keypad, touchscreen etc */
+};
+
+static void __init nhk8815_platform_init(void)
+{
+	int i;
+
+	cpu8815_platform_init();
+	platform_add_devices(nhk8815_platform_devices,
+			     ARRAY_SIZE(nhk8815_platform_devices));
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name);
+		amba_device_register(amba_devs[i], &iomem_resource);
+	}
+}
+
+MACHINE_START(NOMADIK, "NHK8815")
+	/* Maintainer: ST MicroElectronics */
+	.phys_io	= NOMADIK_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(NOMADIK_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x100,
+	.map_io		= cpu8815_map_io,
+	.init_irq	= cpu8815_init_irq,
+	.timer		= &nomadik_timer,
+	.init_machine	= nhk8815_platform_init,
+MACHINE_END
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
new file mode 100644
index 00000000000..9f92502a008
--- /dev/null
+++ b/arch/arm/mach-nomadik/clock.c
@@ -0,0 +1,45 @@
+/*
+ *  linux/arch/arm/mach-nomadik/clock.c
+ *
+ *  Copyright (C) 2009 Alessandro Rubini
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <asm/clkdev.h>
+#include "clock.h"
+
+/*
+ * The nomadik board uses generic clocks, but the serial pl011 file
+ * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* enable and disable do nothing */
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Create a clock structure with the given name */
+int nmdk_clk_create(struct clk *clk, const char *dev_id)
+{
+	struct clk_lookup *clkdev;
+
+	clkdev = clkdev_alloc(clk, NULL, dev_id);
+	if (!clkdev)
+		return -ENOMEM;
+	clkdev_add(clkdev);
+	return 0;
+}
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
new file mode 100644
index 00000000000..235faec7f62
--- /dev/null
+++ b/arch/arm/mach-nomadik/clock.h
@@ -0,0 +1,14 @@
+
+/*
+ *  linux/arch/arm/mach-nomadik/clock.h
+ *
+ *  Copyright (C) 2009 Alessandro Rubini
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct clk {
+	unsigned long		rate;
+};
+extern int nmdk_clk_create(struct clk *clk, const char *dev_id);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
new file mode 100644
index 00000000000..dec42da6956
--- /dev/null
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright STMicroelectronics, 2007.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/vic.h>
+
+/* All SoC devices live in the same area (see hardware.h) */
+static struct map_desc nomadik_io_desc[] __initdata = {
+	{
+		.virtual =	NOMADIK_IO_VIRTUAL,
+		.pfn =		__phys_to_pfn(NOMADIK_IO_PHYSICAL),
+		.length =	NOMADIK_IO_SIZE,
+		.type = 	MT_DEVICE,
+	}
+	/* static ram and secured ram may be added later */
+};
+
+void __init cpu8815_map_io(void)
+{
+	iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc));
+}
+
+void __init cpu8815_init_irq(void)
+{
+	/* This modified VIC cell has two register blocks, at 0 and 0x20 */
+	vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START +  0, ~0, 0);
+	vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+}
+
+/*
+ * This function is called from the board init ("init_machine").
+ * Currently nothing is done as we can't register amba devs so early.
+ */
+ void __init cpu8815_platform_init(void)
+{
+	 return;
+}
diff --git a/arch/arm/mach-nomadik/include/mach/clkdev.h b/arch/arm/mach-nomadik/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
new file mode 100644
index 00000000000..e876990e156
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x10000000	@ physical base address
+		movne	\rx, #0xf0000000	@ virtual base
+		add	\rx, \rx, #0x00100000
+		add	\rx, \rx, #0x000fb000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S
new file mode 100644
index 00000000000..49f1aa3bb42
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/entry-macro.S
@@ -0,0 +1,43 @@
+/*
+ * Low-level IRQ helper macros for Nomadik platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =IO_ADDRESS(NOMADIK_IC_BASE)
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	/* This stanza gets the irq mask from one of two status registers */
+	mov	\irqnr, #0
+	ldr	\irqstat, [\base, #VIC_REG_IRQSR0]	@ get masked status
+	cmp	\irqstat, #0
+	bne	1001f
+	add	\irqnr, \irqnr, #32
+	ldr	\irqstat, [\base, #VIC_REG_IRQSR1]	@ get masked status
+
+1001:	tst	\irqstat, #15
+	bne	1002f
+	add	\irqnr, \irqnr, #4
+	movs	\irqstat, \irqstat, lsr #4
+	bne	1001b
+1002:	tst	\irqstat, #1
+	bne	1003f
+	add	\irqnr, \irqnr, #1
+	movs	\irqstat, \irqstat, lsr #1
+	bne	1002b
+1003:	/* EQ will be set if no irqs pending */
+	.endm
diff --git a/arch/arm/mach-nomadik/include/mach/hardware.h b/arch/arm/mach-nomadik/include/mach/hardware.h
new file mode 100644
index 00000000000..6316dba3bfc
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/hardware.h
@@ -0,0 +1,90 @@
+/*
+ * This file contains the hardware definitions of the Nomadik.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * YOU should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */
+#define NOMADIK_IO_VIRTUAL	0xF0000000	/* VA of IO  */
+#define NOMADIK_IO_PHYSICAL	0x10000000	/* PA of IO */
+#define NOMADIK_IO_SIZE		0x00300000	/* 3MB for all regs */
+
+/* used in C code, so cast to proper type */
+#define io_p2v(x) ((void __iomem *)(x) \
+			- NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+#define io_v2p(x) ((unsigned long)(x) \
+			- NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
+
+/* used in asm code, so no casts */
+#define IO_ADDRESS(x) ((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+
+/*
+ *   Base address defination for Nomadik Onchip Logic Block
+ */
+#define NOMADIK_FSMC_BASE	0x10100000	/* FSMC registers */
+#define NOMADIK_SDRAMC_BASE	0x10110000	/* SDRAM Controller */
+#define NOMADIK_CLCDC_BASE	0x10120000	/* CLCD Controller */
+#define NOMADIK_MDIF_BASE	0x10120000	/* MDIF */
+#define NOMADIK_DMA0_BASE	0x10130000	/* DMA0 Controller */
+#define NOMADIK_IC_BASE		0x10140000	/* Vectored Irq Controller */
+#define NOMADIK_DMA1_BASE	0x10150000	/* DMA1 Controller */
+#define NOMADIK_USB_BASE	0x10170000	/* USB-OTG conf reg base */
+#define NOMADIK_CRYP_BASE	0x10180000	/* Crypto processor */
+#define NOMADIK_SHA1_BASE	0x10190000	/* SHA-1 Processor */
+#define NOMADIK_XTI_BASE	0x101A0000	/* XTI */
+#define NOMADIK_RNG_BASE	0x101B0000	/* Random number generator */
+#define NOMADIK_SRC_BASE	0x101E0000	/* SRC base */
+#define NOMADIK_WDOG_BASE	0x101E1000	/* Watchdog */
+#define NOMADIK_MTU0_BASE	0x101E2000	/* Multiple Timer 0 */
+#define NOMADIK_MTU1_BASE	0x101E3000	/* Multiple Timer 1 */
+#define NOMADIK_GPIO0_BASE	0x101E4000	/* GPIO0 */
+#define NOMADIK_GPIO1_BASE	0x101E5000	/* GPIO1 */
+#define NOMADIK_GPIO2_BASE	0x101E6000	/* GPIO2 */
+#define NOMADIK_GPIO3_BASE	0x101E7000	/* GPIO3 */
+#define NOMADIK_RTC_BASE	0x101E8000	/* Real Time Clock base */
+#define NOMADIK_PMU_BASE	0x101E9000	/* Power Management Unit */
+#define NOMADIK_OWM_BASE	0x101EA000	/* One wire master */
+#define NOMADIK_SCR_BASE	0x101EF000	/* Secure Control registers */
+#define NOMADIK_MSP2_BASE	0x101F0000	/* MSP 2 interface */
+#define NOMADIK_MSP1_BASE	0x101F1000	/* MSP 1 interface */
+#define NOMADIK_UART2_BASE	0x101F2000	/* UART 2 interface */
+#define NOMADIK_SSIRx_BASE	0x101F3000	/* SSI 8-ch rx interface */
+#define NOMADIK_SSITx_BASE	0x101F4000	/* SSI 8-ch tx interface */
+#define NOMADIK_MSHC_BASE	0x101F5000	/* Memory Stick(Pro) Host */
+#define NOMADIK_SDI_BASE	0x101F6000	/* SD-card/MM-Card */
+#define NOMADIK_I2C1_BASE	0x101F7000	/* I2C1 interface */
+#define NOMADIK_I2C0_BASE	0x101F8000	/* I2C0 interface */
+#define NOMADIK_MSP0_BASE	0x101F9000	/* MSP 0 interface  */
+#define NOMADIK_FIRDA_BASE	0x101FA000	/* FIrDA interface  */
+#define NOMADIK_UART1_BASE	0x101FB000	/* UART 1 interface */
+#define NOMADIK_SSP_BASE	0x101FC000	/* SSP interface  */
+#define NOMADIK_UART0_BASE	0x101FD000	/* UART 0 interface */
+#define NOMADIK_SGA_BASE	0x101FE000	/* SGA interface */
+#define NOMADIK_L2CC_BASE	0x10210000	/* L2 Cache controller */
+
+/* Other ranges, not for p2v/v2p */
+#define NOMADIK_BACKUP_RAM	0x80010000
+#define NOMADIK_EBROM		0x80000000	/* Embedded boot ROM */
+#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000	/* HAMACV Data Memory Start */
+#define NOMADIK_HAMACV_DMEM_END	0xA01FFFFF	/* HAMACV Data Memory End */
+#define NOMADIK_HAMACA_DMEM	0xA0200000	/* HAMACA Data Memory Space */
+
+#define NOMADIK_FSMC_VA		IO_ADDRESS(NOMADIK_FSMC_BASE)
+#define NOMADIK_MTU0_VA		IO_ADDRESS(NOMADIK_MTU0_BASE)
+#define NOMADIK_MTU1_VA		IO_ADDRESS(NOMADIK_MTU1_BASE)
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nomadik/include/mach/io.h b/arch/arm/mach-nomadik/include/mach/io.h
new file mode 100644
index 00000000000..2e1eca1b824
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-nomadik/include/mach/io.h   (copied from mach-sa1100)
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997  RMK     Created.
+ *  07-04-1999  RMK     Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)         __typesafe_io(a)
+#define __mem_pci(a)    (a)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
new file mode 100644
index 00000000000..8faabc56039
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -0,0 +1,82 @@
+/*
+ *  mach-nomadik/include/mach/irqs.h
+ *
+ *  Copyright (C) ST Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <mach/hardware.h>
+
+#define IRQ_VIC_START		0	/* first VIC interrupt is 0 */
+
+/*
+ * Interrupt numbers generic for all Nomadik Chip cuts
+ */
+#define IRQ_WATCHDOG			0
+#define IRQ_SOFTINT			1
+#define IRQ_CRYPTO			2
+#define IRQ_OWM				3
+#define IRQ_MTU0			4
+#define IRQ_MTU1			5
+#define IRQ_GPIO0			6
+#define IRQ_GPIO1			7
+#define IRQ_GPIO2			8
+#define IRQ_GPIO3			9
+#define IRQ_RTC_RTT			10
+#define IRQ_SSP				11
+#define IRQ_UART0			12
+#define IRQ_DMA1			13
+#define IRQ_CLCD_MDIF			14
+#define IRQ_DMA0			15
+#define IRQ_PWRFAIL			16
+#define IRQ_UART1			17
+#define IRQ_FIRDA			18
+#define IRQ_MSP0			19
+#define IRQ_I2C0			20
+#define IRQ_I2C1			21
+#define IRQ_SDMMC			22
+#define IRQ_USBOTG			23
+#define IRQ_SVA_IT0			24
+#define IRQ_SVA_IT1			25
+#define IRQ_SAA_IT0			26
+#define IRQ_SAA_IT1			27
+#define IRQ_UART2			28
+#define IRQ_MSP2			31
+#define IRQ_L2CC			48
+#define IRQ_HPI				49
+#define IRQ_SKE				50
+#define IRQ_KP				51
+#define IRQ_MEMST			54
+#define IRQ_SGA_IT			58
+#define IRQ_USBM			60
+#define IRQ_MSP1			62
+
+#define NOMADIK_SOC_NR_IRQS		64
+
+/* After chip-specific IRQ numbers we have the GPIO ones */
+#define NOMADIK_NR_GPIO			128 /* last 4 not wired to pins */
+#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + NOMADIK_SOC_NR_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - NOMADIK_SOC_NR_IRQS)
+#define NR_IRQS				NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+
+/* Following two are used by entry_macro.S, to access our dual-vic */
+#define VIC_REG_IRQSR0		0
+#define VIC_REG_IRQSR1		0x20
+
+#endif /* __ASM_ARCH_IRQS_H */
+
diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h
new file mode 100644
index 00000000000..1e5689d98ec
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/memory.h
@@ -0,0 +1,28 @@
+/*
+ *  mach-nomadik/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h
new file mode 100644
index 00000000000..76da7f08533
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/mtu.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_ARCH_MTU_H
+#define __ASM_ARCH_MTU_H
+
+/*
+ * The MTU device hosts four different counters, with 4 set of
+ * registers. These are register names.
+ */
+
+#define MTU_IMSC	0x00	/* Interrupt mask set/clear */
+#define MTU_RIS		0x04	/* Raw interrupt status */
+#define MTU_MIS		0x08	/* Masked interrupt status */
+#define MTU_ICR		0x0C	/* Interrupt clear register */
+
+/* per-timer registers take 0..3 as argument */
+#define MTU_LR(x)	(0x10 + 0x10 * (x) + 0x00)	/* Load value */
+#define MTU_VAL(x)	(0x10 + 0x10 * (x) + 0x04)	/* Current value */
+#define MTU_CR(x)	(0x10 + 0x10 * (x) + 0x08)	/* Control reg */
+#define MTU_BGLR(x)	(0x10 + 0x10 * (x) + 0x0c)	/* At next overflow */
+
+/* bits for the control register */
+#define MTU_CRn_ENA		0x80
+#define MTU_CRn_PERIODIC	0x40	/* if 0 = free-running */
+#define MTU_CRn_PRESCALE_MASK	0x0c
+#define MTU_CRn_PRESCALE_1		0x00
+#define MTU_CRn_PRESCALE_16		0x04
+#define MTU_CRn_PRESCALE_256		0x08
+#define MTU_CRn_32BITS		0x02
+#define MTU_CRn_ONESHOT		0x01	/* if 0 = wraps reloading from BGLR*/
+
+/* Other registers are usual amba/primecell registers, currently not used */
+#define MTU_ITCR	0xff0
+#define MTU_ITOP	0xff4
+
+#define MTU_PERIPH_ID0	0xfe0
+#define MTU_PERIPH_ID1	0xfe4
+#define MTU_PERIPH_ID2	0xfe8
+#define MTU_PERIPH_ID3	0xfeC
+
+#define MTU_PCELL0	0xff0
+#define MTU_PCELL1	0xff4
+#define MTU_PCELL2	0xff8
+#define MTU_PCELL3	0xffC
+
+#endif /* __ASM_ARCH_MTU_H */
+
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
new file mode 100644
index 00000000000..a4e468cf63d
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -0,0 +1,22 @@
+
+/*
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+#ifdef CONFIG_NOMADIK_8815
+
+extern void cpu8815_map_io(void);
+extern void cpu8815_platform_init(void);
+extern void cpu8815_init_irq(void);
+extern struct sys_timer nomadik_timer;
+
+#endif /* NOMADIK_8815 */
+
+#endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
new file mode 100644
index 00000000000..7119f688116
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/system.h
@@ -0,0 +1,45 @@
+/*
+ *  mach-nomadik/include/mach/system.h
+ *
+ *  Copyright (C) 2008 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
+
+	/* FIXME: use egpio when implemented */
+
+	/* Write anything to Reset status register */
+	writel(1, src_rstsr);
+}
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/timex.h b/arch/arm/mach-nomadik/include/mach/timex.h
new file mode 100644
index 00000000000..318b8896ce9
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE         2400000
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h
new file mode 100644
index 00000000000..071003bc845
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/uncompress.h
@@ -0,0 +1,63 @@
+/*
+ *  Copyright (C) 2008 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <mach/hardware.h>
+
+/* we need the constants in amba/serial.h, but it refers to amba_device */
+struct amba_device;
+#include <linux/amba/serial.h>
+
+#define NOMADIK_UART_DR		0x101FB000
+#define NOMADIK_UART_LCRH	0x101FB02c
+#define NOMADIK_UART_CR		0x101FB030
+#define NOMADIK_UART_FR		0x101FB018
+
+static void putc(const char c)
+{
+	/* Do nothing if the UART is not enabled. */
+	if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
+		return;
+
+	if (c == '\n')
+		putc('\r');
+
+	while (readb(NOMADIK_UART_FR) & UART01x_FR_TXFF)
+		barrier();
+	writeb(c, NOMADIK_UART_DR);
+}
+
+static void flush(void)
+{
+	if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
+		return;
+	while (readb(NOMADIK_UART_FR) & UART01x_FR_BUSY)
+		barrier();
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog() /* nothing to do here */
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-nomadik/include/mach/vmalloc.h b/arch/arm/mach-nomadik/include/mach/vmalloc.h
new file mode 100644
index 00000000000..be12e31ea52
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/vmalloc.h
@@ -0,0 +1,2 @@
+
+#define VMALLOC_END       0xe8000000
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c
new file mode 100644
index 00000000000..d1738e7061d
--- /dev/null
+++ b/arch/arm/mach-nomadik/timer.c
@@ -0,0 +1,164 @@
+/*
+ *  linux/arch/arm/mach-nomadik/timer.c
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clockchips.h>
+#include <linux/jiffies.h>
+#include <asm/mach/time.h>
+#include <mach/mtu.h>
+
+#define TIMER_CTRL	0x80	/* No divisor */
+#define TIMER_PERIODIC	0x40
+#define TIMER_SZ32BIT	0x02
+
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK	0x00007fff
+#define SRC_CR_INIT_VAL		0x2aaa8000
+
+static u32	nmdk_count;		/* accumulated count */
+static u32	nmdk_cycle;		/* write-once */
+static __iomem void *mtu_base;
+
+/*
+ * clocksource: the MTU device is a decrementing counters, so we negate
+ * the value being read.
+ */
+static cycle_t nmdk_read_timer(struct clocksource *cs)
+{
+	u32 count = readl(mtu_base + MTU_VAL(0));
+	return nmdk_count + nmdk_cycle - count;
+
+}
+
+static struct clocksource nmdk_clksrc = {
+	.name		= "mtu_0",
+	.rating		= 120,
+	.read		= nmdk_read_timer,
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * Clockevent device: currently only periodic mode is supported
+ */
+static void nmdk_clkevt_mode(enum clock_event_mode mode,
+			     struct clock_event_device *dev)
+{
+	unsigned long flags;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* enable interrupts -- and count current value? */
+		raw_local_irq_save(flags);
+		writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
+		raw_local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		BUG(); /* Not supported, yet */
+		/* FALLTHROUGH */
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+		/* disable irq */
+		raw_local_irq_save(flags);
+		writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
+		raw_local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device nmdk_clkevt = {
+	.name		= "mtu_0",
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.shift		= 32,
+	.rating		= 100,
+	.set_mode	= nmdk_clkevt_mode,
+};
+
+/*
+ * IRQ Handler for the timer 0 of the MTU block. The irq is not shared
+ * as we are the only users of mtu0 by now.
+ */
+static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
+{
+	/* ack: "interrupt clear register" */
+	writel( 1 << 0, mtu_base + MTU_ICR);
+
+	/* we can't count lost ticks, unfortunately */
+	nmdk_count += nmdk_cycle;
+	nmdk_clkevt.event_handler(&nmdk_clkevt);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static struct irqaction nmdk_timer_irq = {
+	.name		= "Nomadik Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= nmdk_timer_interrupt,
+};
+
+static void nmdk_timer_reset(void)
+{
+	u32 cr;
+
+	writel(0, mtu_base + MTU_CR(0)); /* off */
+
+	/* configure load and background-load, and fire it up */
+	writel(nmdk_cycle, mtu_base + MTU_LR(0));
+	writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+	cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
+	writel(cr, mtu_base + MTU_CR(0));
+	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
+}
+
+static void __init nmdk_timer_init(void)
+{
+	u32 src_cr;
+	unsigned long rate;
+	int bits;
+
+	rate = CLOCK_TICK_RATE; /* 2.4MHz */
+	nmdk_cycle = (rate + HZ/2) / HZ;
+
+	/* Configure timer sources in "system reset controller" ctrl reg */
+	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+	src_cr &= SRC_CR_INIT_MASK;
+	src_cr |= SRC_CR_INIT_VAL;
+	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+
+	/* Save global pointer to mtu, used by functions above */
+	mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+
+	/* Init the timer and register clocksource */
+	nmdk_timer_reset();
+
+	nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
+	bits =  8*sizeof(nmdk_count);
+	nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
+
+	clocksource_register(&nmdk_clksrc);
+
+	/* Register irq and clockevents */
+	setup_irq(IRQ_MTU0, &nmdk_timer_irq);
+	nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+	nmdk_clkevt.cpumask = cpumask_of(0);
+	clockevents_register_device(&nmdk_clkevt);
+}
+
+struct sys_timer nomadik_timer = {
+	.init		= nmdk_timer_init,
+};
-- 
GitLab


From 2ec1d3594563e0283873e24bb5d100dffee5d568 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:12 +0100
Subject: [PATCH 015/257] [ARM] 5584/1: nomadik: add gpio driver and devices

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                          |   3 +-
 arch/arm/mach-nomadik/Makefile            |   2 +-
 arch/arm/mach-nomadik/cpu-8815.c          |  75 ++++
 arch/arm/mach-nomadik/gpio.c              | 396 ++++++++++++++++++++++
 arch/arm/mach-nomadik/include/mach/gpio.h |  71 ++++
 5 files changed, 545 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-nomadik/gpio.c
 create mode 100644 arch/arm/mach-nomadik/include/mach/gpio.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d8cfd706501..b1093d8786b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -336,7 +336,8 @@ config ARCH_NOMADIK
 	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for the Nomadik platform by ST-Ericsson
 
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index fa97769fe70..3fc43543e6e 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,7 +7,7 @@
 
 # Object file lists.
 
-obj-y			+= clock.o timer.o
+obj-y			+= clock.o timer.o gpio.o
 
 # Cpu revision
 obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index dec42da6956..9917a9abdb5 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -19,12 +19,87 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
 
+/* The 8815 has 4 GPIO blocks, let's register them immediately */
+static struct nmk_gpio_platform_data cpu8815_gpio[] = {
+	{
+		.name = "GPIO-0-31",
+		.first_gpio = 0,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(0),
+		.parent_irq = IRQ_GPIO0,
+	}, {
+		.name = "GPIO-32-63",
+		.first_gpio = 32,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(32),
+		.parent_irq = IRQ_GPIO1,
+	}, {
+		.name = "GPIO-64-95",
+		.first_gpio = 64,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(64),
+		.parent_irq = IRQ_GPIO2,
+	}, {
+		.name = "GPIO-96-127", /* 124..127 not routed to pin */
+		.first_gpio = 96,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(96),
+		.parent_irq = IRQ_GPIO3,
+	}
+};
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+static struct amba_device cpu8815_amba_gpio[] = {
+	{
+		.dev = {
+			.init_name = "gpio0",
+			.platform_data = cpu8815_gpio + 0,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE),
+	}, {
+		.dev = {
+			.init_name = "gpio1",
+			.platform_data = cpu8815_gpio + 1,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE),
+	}, {
+		.dev = {
+			.init_name = "gpio2",
+			.platform_data = cpu8815_gpio + 2,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE),
+	}, {
+		.dev = {
+			.init_name = "gpio3",
+			.platform_data = cpu8815_gpio + 3,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE),
+	},
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	cpu8815_amba_gpio + 0,
+	cpu8815_amba_gpio + 1,
+	cpu8815_amba_gpio + 2,
+	cpu8815_amba_gpio + 3,
+};
+
+static int __init cpu8815_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+	return 0;
+}
+arch_initcall(cpu8815_init);
+
 /* All SoC devices live in the same area (see hardware.h) */
 static struct map_desc nomadik_io_desc[] __initdata = {
 	{
diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c
new file mode 100644
index 00000000000..9a09b2791e0
--- /dev/null
+++ b/arch/arm/mach-nomadik/gpio.c
@@ -0,0 +1,396 @@
+/*
+ * Generic GPIO driver for logic cells found in the Nomadik SoC
+ *
+ * Copyright (C) 2008,2009 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *   Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+/*
+ * The GPIO module in the Nomadik family of Systems-on-Chip is an
+ * AMBA device, managing 32 pins and alternate functions.  The logic block
+ * is currently only used in the Nomadik.
+ *
+ * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
+ */
+
+#define NMK_GPIO_PER_CHIP 32
+struct nmk_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem *addr;
+	unsigned int parent_irq;
+	spinlock_t *lock;
+	/* Keep track of configured edges */
+	u32 edge_rising;
+	u32 edge_falling;
+};
+
+/* Mode functions */
+int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 afunc, bfunc, bit;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	bit = 1 << (gpio - nmk_chip->chip.base);
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
+	if (gpio_mode & NMK_GPIO_ALT_A)
+		afunc |= bit;
+	if (gpio_mode & NMK_GPIO_ALT_B)
+		bfunc |= bit;
+	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
+	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(nmk_gpio_set_mode);
+
+int nmk_gpio_get_mode(int gpio)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	u32 afunc, bfunc, bit;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	bit = 1 << (gpio - nmk_chip->chip.base);
+
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
+
+	return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
+}
+EXPORT_SYMBOL(nmk_gpio_get_mode);
+
+
+/* IRQ functions */
+static inline int nmk_gpio_get_bitmask(int gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+static void nmk_gpio_irq_ack(unsigned int irq)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	if (!nmk_chip)
+		return;
+	writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
+}
+
+static void nmk_gpio_irq_mask(unsigned int irq)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask, reg;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return;
+
+	/* we must individually clear the two edges */
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	if (nmk_chip->edge_rising & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+		reg &= ~bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+	}
+	if (nmk_chip->edge_falling & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+		reg &= ~bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+	}
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+};
+
+static void nmk_gpio_irq_unmask(unsigned int irq)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask, reg;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return;
+
+	/* we must individually set the two edges */
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	if (nmk_chip->edge_rising & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+		reg |= bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+	}
+	if (nmk_chip->edge_falling & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+		reg |= bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+	}
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+}
+
+static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return -EINVAL;
+
+	if (type & IRQ_TYPE_LEVEL_HIGH)
+		return -EINVAL;
+	if (type & IRQ_TYPE_LEVEL_LOW)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+
+	nmk_chip->edge_rising &= ~bitmask;
+	if (type & IRQ_TYPE_EDGE_RISING)
+		nmk_chip->edge_rising |= bitmask;
+	writel(nmk_chip->edge_rising, nmk_chip->addr + NMK_GPIO_RIMSC);
+
+	nmk_chip->edge_falling &= ~bitmask;
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		nmk_chip->edge_falling |= bitmask;
+	writel(nmk_chip->edge_falling, nmk_chip->addr + NMK_GPIO_FIMSC);
+
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	nmk_gpio_irq_unmask(irq);
+
+	return 0;
+}
+
+static struct irq_chip nmk_gpio_irq_chip = {
+	.name		= "Nomadik-GPIO",
+	.ack		= nmk_gpio_irq_ack,
+	.mask		= nmk_gpio_irq_mask,
+	.unmask		= nmk_gpio_irq_unmask,
+	.set_type	= nmk_gpio_irq_set_type,
+};
+
+static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	struct irq_chip *host_chip;
+	unsigned int gpio_irq;
+	u32 pending;
+	unsigned int first_irq;
+
+	nmk_chip = get_irq_data(irq);
+	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+	while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) {
+		gpio_irq = first_irq + __ffs(pending);
+		generic_handle_irq(gpio_irq);
+	}
+	if (0) {/* don't ack parent irq, as ack == disable */
+		host_chip = get_irq_chip(irq);
+		host_chip->ack(irq);
+	}
+}
+
+static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
+{
+	unsigned int first_irq;
+	int i;
+
+	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+	for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) {
+		set_irq_chip(i, &nmk_gpio_irq_chip);
+		set_irq_handler(i, handle_edge_irq);
+		set_irq_flags(i, IRQF_VALID);
+		set_irq_chip_data(i, nmk_chip);
+	}
+	set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
+	set_irq_data(nmk_chip->parent_irq, nmk_chip);
+	return 0;
+}
+
+/* I/O Functions */
+static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+	return 0;
+}
+
+static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+	return 0;
+}
+
+static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+	u32 bit = 1 << offset;
+
+	return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+}
+
+static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+	u32 bit = 1 << offset;
+
+	if (val)
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
+	else
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+/* This structure is replicated for each GPIO block allocated at probe time */
+static struct gpio_chip nmk_gpio_template = {
+	.direction_input	= nmk_gpio_make_input,
+	.get			= nmk_gpio_get_input,
+	.direction_output	= nmk_gpio_make_output,
+	.set			= nmk_gpio_set_output,
+	.ngpio			= NMK_GPIO_PER_CHIP,
+	.can_sleep		= 0,
+};
+
+static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
+{
+	struct nmk_gpio_platform_data *pdata;
+	struct nmk_gpio_chip *nmk_chip;
+	struct gpio_chip *chip;
+	int ret;
+
+	pdata = dev->dev.platform_data;
+	ret = amba_request_regions(dev, pdata->name);
+	if (ret)
+		return ret;
+
+	nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
+	if (!nmk_chip) {
+		ret = -ENOMEM;
+		goto out_amba;
+	}
+	/*
+	 * The virt address in nmk_chip->addr is in the nomadik register space,
+	 * so we can simply convert the resource address, without remapping
+	 */
+	nmk_chip->addr = io_p2v(dev->res.start);
+	nmk_chip->chip = nmk_gpio_template;
+	nmk_chip->parent_irq = pdata->parent_irq;
+
+	chip = &nmk_chip->chip;
+	chip->base = pdata->first_gpio;
+	chip->label = pdata->name;
+	chip->dev = &dev->dev;
+	chip->owner = THIS_MODULE;
+
+	ret = gpiochip_add(&nmk_chip->chip);
+	if (ret)
+		goto out_free;
+
+	amba_set_drvdata(dev, nmk_chip);
+
+	nmk_gpio_init_irq(nmk_chip);
+
+	dev_info(&dev->dev, "Bits %i-%i at address %p\n",
+		 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
+	return 0;
+
+ out_free:
+	kfree(nmk_chip);
+ out_amba:
+	amba_release_regions(dev);
+	dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
+		  pdata->first_gpio, pdata->first_gpio+31);
+	return ret;
+}
+
+static int nmk_gpio_remove(struct amba_device *dev)
+{
+	struct nmk_gpio_chip *nmk_chip;
+
+	nmk_chip = amba_get_drvdata(dev);
+	gpiochip_remove(&nmk_chip->chip);
+	kfree(nmk_chip);
+	amba_release_regions(dev);
+	return 0;
+}
+
+
+/* We have 0x1f080060 and 0x1f180060, accept both using the mask */
+static struct amba_id nmk_gpio_ids[] = {
+	{
+		.id	= 0x1f080060,
+		.mask	= 0xffefffff,
+	},
+	{0, 0},
+};
+
+static struct amba_driver nmk_gpio_driver = {
+	.drv = {
+		.owner = THIS_MODULE,
+		.name = "gpio",
+		},
+	.probe = nmk_gpio_probe,
+	.remove = nmk_gpio_remove,
+	.suspend = NULL, /* to be done */
+	.resume = NULL,
+	.id_table = nmk_gpio_ids,
+};
+
+static int __init nmk_gpio_init(void)
+{
+	return amba_driver_register(&nmk_gpio_driver);
+}
+
+arch_initcall(nmk_gpio_init);
+
+MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
+MODULE_DESCRIPTION("Nomadik GPIO Driver");
+MODULE_LICENSE("GPL");
+
+
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
new file mode 100644
index 00000000000..61577c9f9a7
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
@@ -0,0 +1,71 @@
+/*
+ * Structures and registers for GPIO access in the Nomadik SoC
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * These currently cause a function call to happen, they may be optimized
+ * if needed by adding cpu-specific defines to identify blocks
+ * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
+ */
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT	0x00
+#define NMK_GPIO_DATS	0x04
+#define NMK_GPIO_DATC	0x08
+#define NMK_GPIO_PDIS	0x0c
+#define NMK_GPIO_DIR	0x10
+#define NMK_GPIO_DIRS	0x14
+#define NMK_GPIO_DIRC	0x18
+#define NMK_GPIO_SLPC	0x1c
+#define NMK_GPIO_AFSLA	0x20
+#define NMK_GPIO_AFSLB	0x24
+
+#define NMK_GPIO_RIMSC	0x40
+#define NMK_GPIO_FIMSC	0x44
+#define NMK_GPIO_IS	0x48
+#define NMK_GPIO_IC	0x4c
+#define NMK_GPIO_RWIMSC	0x50
+#define NMK_GPIO_FWIMSC	0x54
+#define NMK_GPIO_WKS	0x58
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO	0
+#define NMK_GPIO_ALT_A	1
+#define NMK_GPIO_ALT_B	2
+#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+extern int nmk_gpio_get_mode(int gpio);
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+	char *name;
+	int first_gpio;
+	int first_irq;
+	int parent_irq;
+};
+
+#endif /* __ASM_ARCH_GPIO_H */
-- 
GitLab


From 63796b740b888b396eb0cc78917d755693cc224c Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:22 +0100
Subject: [PATCH 016/257] [ARM] 5585/1: nomadik: add gpio-i2c devices

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-nomadik/Kconfig       |  7 ++++
 arch/arm/mach-nomadik/Makefile      |  3 ++
 arch/arm/mach-nomadik/i2c-8815nhk.c | 65 +++++++++++++++++++++++++++++
 3 files changed, 75 insertions(+)
 create mode 100644 arch/arm/mach-nomadik/i2c-8815nhk.c

diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index abce2346106..2a02b49c40f 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -11,4 +11,11 @@ endmenu
 config NOMADIK_8815
 	bool
 
+
+config I2C_BITBANG_8815NHK
+	tristate "Driver for bit-bang busses found on the 8815 NHK"
+	depends on I2C && MACH_NOMADIK_8815NHK
+	select I2C_ALGOBIT
+	default y
+
 endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index 3fc43543e6e..412040982a4 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -14,3 +14,6 @@ obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
 
 # Specific board support
 obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
+
+# Nomadik extra devices
+obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
new file mode 100644
index 00000000000..abfe25a08d6
--- /dev/null
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -0,0 +1,65 @@
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+/*
+ * There are two busses in the 8815NHK.
+ * They could, in theory, be driven by the hardware component, but we
+ * use bit-bang through GPIO by now, to keep things simple
+ */
+
+static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
+	/* keep defaults for timeouts; pins are push-pull bidirectional */
+	.scl_pin = 62,
+	.sda_pin = 63,
+};
+
+static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
+	/* keep defaults for timeouts; pins are push-pull bidirectional */
+	.scl_pin = 53,
+	.sda_pin = 54,
+};
+
+/* first bus: GPIO XX and YY */
+static struct platform_device nhk8815_i2c_dev0 = {
+	.name	= "i2c-gpio",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &nhk8815_i2c_data0,
+	},
+};
+/* second bus: GPIO XX and YY */
+static struct platform_device nhk8815_i2c_dev1 = {
+	.name	= "i2c-gpio",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &nhk8815_i2c_data1,
+	},
+};
+
+static int __init nhk8815_i2c_init(void)
+{
+	nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO);
+	nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO);
+	platform_device_register(&nhk8815_i2c_dev0);
+
+	nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO);
+	nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO);
+	platform_device_register(&nhk8815_i2c_dev1);
+
+	return 0;
+}
+
+static void __exit nhk8815_i2c_exit(void)
+{
+	platform_device_unregister(&nhk8815_i2c_dev0);
+	platform_device_unregister(&nhk8815_i2c_dev1);
+	return;
+}
+
+module_init(nhk8815_i2c_init);
+module_exit(nhk8815_i2c_exit);
-- 
GitLab


From 725b1f9d86822246e5a1237bf97d2783857d8a3a Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:32 +0100
Subject: [PATCH 017/257] [ARM] 5586/1: nomadik board: added ethernet

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-nomadik/board-nhk8815.c | 38 ++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index eebca614d36..79bdea943eb 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -14,6 +14,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
@@ -45,8 +47,42 @@ static struct clk nhk8815_clk_48 = {
 	.rate = 48*1000*1000,
 };
 
+static struct resource nhk8815_eth_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x34000000 + 0x300,
+		.end = 0x34000000 + SZ_64K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = NOMADIK_GPIO_TO_IRQ(115),
+		.end = NOMADIK_GPIO_TO_IRQ(115),
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
+	}
+};
+
+static struct platform_device nhk8815_eth_device = {
+	.name = "smc91x",
+	.resource = nhk8815_eth_resources,
+	.num_resources = ARRAY_SIZE(nhk8815_eth_resources),
+};
+
+static int __init nhk8815_eth_init(void)
+{
+	int gpio_nr = 115; /* hardwired in the board */
+	int err;
+
+	err = gpio_request(gpio_nr, "eth_irq");
+	if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
+	if (!err) err = gpio_direction_input(gpio_nr);
+	if (err)
+		pr_err("Error %i in %s\n", err, __func__);
+	return err;
+}
+device_initcall(nhk8815_eth_init);
+
 static struct platform_device *nhk8815_platform_devices[] __initdata = {
-	/* currently empty, will add keypad, touchscreen etc */
+	&nhk8815_eth_device,
+	/* will add more devices */
 };
 
 static void __init nhk8815_platform_init(void)
-- 
GitLab


From 0b260fd4b0eb7c90f9258bfa6317ae553319b5da Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:43 +0100
Subject: [PATCH 018/257] [ARM] 5587/1: nomadik: add l2cc

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-nomadik/cpu-8815.c | 8 +++++++-
 arch/arm/mm/Kconfig              | 2 +-
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 9917a9abdb5..f93c5963419 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -27,6 +27,9 @@
 #include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
 
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+
 /* The 8815 has 4 GPIO blocks, let's register them immediately */
 static struct nmk_gpio_platform_data cpu8815_gpio[] = {
 	{
@@ -125,9 +128,12 @@ void __init cpu8815_init_irq(void)
 
 /*
  * This function is called from the board init ("init_machine").
- * Currently nothing is done as we can't register amba devs so early.
  */
  void __init cpu8815_platform_init(void)
 {
+#ifdef CONFIG_CACHE_L2X0
+	/* At full speed latency must be >=2, so 0x249 in low bits */
+	l2x0_init(io_p2v(NOMADIK_L2CC_BASE), 0x00730249, 0xfe000fff);
+#endif
 	 return;
 }
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 83c025e72ce..5fe595aeba6 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -758,7 +758,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX
+		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK
 	default y
 	select OUTER_CACHE
 	help
-- 
GitLab


From c2b455474e4c6bc8bab6506e2a08dbd5ad50d74d Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:53 +0100
Subject: [PATCH 019/257] [ARM] 5588/1: nomadik: add defconfig for nhk8815

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/nhk8815_defconfig | 1316 ++++++++++++++++++++++++++++
 1 file changed, 1316 insertions(+)
 create mode 100644 arch/arm/configs/nhk8815_defconfig

diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
new file mode 100644
index 00000000000..9bb45b932f0
--- /dev/null
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Tue Jun 23 22:57:16 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_NOMADIK=y
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Nomadik boards
+#
+CONFIG_MACH_NOMADIK_8815NHK=y
+CONFIG_NOMADIK_8815=y
+CONFIG_I2C_BITBANG_8815NHK=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_TESTS=m
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_NOMADIK=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_PL061 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_WACOM is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From bbeddc43e673fb6882cc55efdc3c3002c14f5d08 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 5 Jul 2009 22:43:01 +0100
Subject: [PATCH 020/257] [ARM] versatile: add PL061 gpiolib support

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                            |  1 +
 arch/arm/mach-versatile/core.c              | 15 +++++++++++++--
 arch/arm/mach-versatile/include/mach/gpio.h |  6 ++++++
 arch/arm/mach-versatile/include/mach/irqs.h | 11 ++++++++++-
 arch/arm/mach-versatile/versatile_pb.c      | 15 +++++++++++++--
 5 files changed, 43 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-versatile/include/mach/gpio.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..e4971e4fa56 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -229,6 +229,7 @@ config ARCH_VERSATILE
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  This enables support for ARM Ltd Versatile board.
 
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 69214fc8bd1..92273c95edf 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
+#include <linux/amba/pl061.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/cnt32_to_63.h>
@@ -706,6 +707,16 @@ static struct clcd_board clcd_plat_data = {
 	.remove		= versatile_clcd_remove,
 };
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= IRQ_GPIO0_START,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= IRQ_GPIO1_START,
+};
+
 #define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
 #define AACI_DMA	{ 0x80, 0x81 }
 #define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
@@ -768,8 +779,8 @@ AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
 AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h
new file mode 100644
index 00000000000..94ff27678a4
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
index 9bfdb30e1f3..bf44c61bd1f 100644
--- a/arch/arm/mach-versatile/include/mach/irqs.h
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -122,4 +122,13 @@
 #define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
 #define IRQ_SIC_END		63
 
-#define NR_IRQS			64
+#define IRQ_GPIO0_START		(IRQ_SIC_END + 1)
+#define IRQ_GPIO0_END		(IRQ_GPIO0_START + 31)
+#define IRQ_GPIO1_START		(IRQ_GPIO0_END + 1)
+#define IRQ_GPIO1_END		(IRQ_GPIO1_START + 31)
+#define IRQ_GPIO2_START		(IRQ_GPIO1_END + 1)
+#define IRQ_GPIO2_END		(IRQ_GPIO2_START + 31)
+#define IRQ_GPIO3_START		(IRQ_GPIO2_END + 1)
+#define IRQ_GPIO3_END		(IRQ_GPIO3_START + 31)
+
+#define NR_IRQS			(IRQ_GPIO3_END + 1)
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index aa051c0884f..7419451fdf0 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -23,6 +23,7 @@
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -45,6 +46,16 @@ static struct mmc_platform_data mmc1_plat_data = {
 	.status		= mmc_status,
 };
 
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= IRQ_GPIO2_START,
+};
+
+static struct pl061_platform_data gpio3_plat_data = {
+	.gpio_base	= 24,
+	.irq_base	= IRQ_GPIO3_START,
+};
+
 #define UART3_IRQ	{ IRQ_SIC_UART3, NO_IRQ }
 #define UART3_DMA	{ 0x86, 0x87 }
 #define SCI1_IRQ	{ IRQ_SIC_SCI3, NO_IRQ }
@@ -70,8 +81,8 @@ AMBA_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
 AMBA_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
 
 /* DevChip Primecells */
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
-AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    NULL);
+AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
+AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&uart3_device,
-- 
GitLab


From eb7fffa39a3f114832df54a3e373d7580d8fe757 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 5 Jul 2009 22:41:31 +0100
Subject: [PATCH 021/257] [ARM] realview: add PL061 gpiolib support

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                           |  1 +
 arch/arm/mach-realview/include/mach/gpio.h |  6 ++++++
 arch/arm/mach-realview/realview_eb.c       | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pb1176.c   | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pb11mp.c   | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pba8.c     | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pbx.c      | 22 +++++++++++++++++++---
 7 files changed, 102 insertions(+), 15 deletions(-)
 create mode 100644 arch/arm/mach-realview/include/mach/gpio.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e4971e4fa56..0dd29eb4a0e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -217,6 +217,7 @@ config ARCH_REALVIEW
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  This enables support for ARM Ltd RealView boards.
 
diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h
new file mode 100644
index 00000000000..94ff27678a4
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 8dfa44e08a9..abd13b44867 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -113,6 +114,21 @@ static void __init realview_eb_map_io(void)
 		iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView EB AMBA devices
  */
@@ -189,9 +205,9 @@ AMBA_DEVICE(clcd,  "dev:20",  EB_CLCD,  &clcd_plat_data);
 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 AMBA_DEVICE(wdog,  "dev:e1",  EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
 AMBA_DEVICE(rtc,   "dev:e8",  EB_RTC,   NULL);
 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:f1",  EB_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 25efe71a67c..17fbb0e889b 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -107,6 +108,21 @@ static void __init realview_pb1176_map_io(void)
 	iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PB1176 AMBA devices
  */
@@ -164,9 +180,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PB1176_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PB1176_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PB1176_WATCHDOG,	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PB1176_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PB1176_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index dc4b1694390..fdd042b85f4 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -108,6 +109,21 @@ static void __init realview_pb11mp_map_io(void)
 	iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PB11MPCore AMBA devices
  */
@@ -166,9 +182,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PB11MP_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PB11MP_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PB11MP_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PB11MP_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index d6ac1eb8657..70bba9900d9 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -98,6 +99,21 @@ static void __init realview_pba8_map_io(void)
 	iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PBA8Core AMBA devices
  */
@@ -156,9 +172,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PBA8_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PBA8_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PBA8_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PBA8_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ede2a57240a..ce6c5d25fbe 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -118,6 +119,21 @@ static void __init realview_pbx_map_io(void)
 		iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PBXCore AMBA devices
  */
@@ -176,9 +192,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PBX_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PBX_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PBX_WATCHDOG, 	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PBX_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PBX_UART0,	NULL);
-- 
GitLab


From 012b7d339ce8c42d41e35b35c4acc3dd29501d52 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 9 Jul 2009 15:13:56 +0100
Subject: [PATCH 022/257] MMC: MMCI: use AMBA bus accessors

Rather than open coding the accessors for decoding peripheral IDs,
use the macros already provided.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
---
 drivers/mmc/host/mmci.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index e1aa8471ab1..ac43f395eec 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -515,12 +515,12 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 
 	host = mmc_priv(mmc);
 	host->mmc = mmc;
-	/* Bits 12 thru 19 is the designer */
-	host->hw_designer = (dev->periphid >> 12) & 0xff;
-	/* Bits 20 thru 23 is the revison */
-	host->hw_revision = (dev->periphid >> 20) & 0xf;
+
+	host->hw_designer = amba_manf(dev);
+	host->hw_revision = amba_rev(dev);
 	DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
 	DBG(host, "revision = 0x%01x\n", host->hw_revision);
+
 	host->clk = clk_get(&dev->dev, NULL);
 	if (IS_ERR(host->clk)) {
 		ret = PTR_ERR(host->clk);
-- 
GitLab


From 7fb2bbf4d9e7e62057184f1e061566459eef6c79 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 9 Jul 2009 15:15:12 +0100
Subject: [PATCH 023/257] MMC: MMCI: allow GPIOs to be passed

Add and initialize the gpio_wp and gpio_cd members.  We need to
ensure that all users are covered, because GPIO 0 may be valid.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
---
 arch/arm/include/asm/mach/mmc.h          | 2 ++
 arch/arm/mach-integrator/integrator_cp.c | 2 ++
 arch/arm/mach-realview/core.c            | 4 ++++
 arch/arm/mach-u300/mmc.c                 | 2 ++
 arch/arm/mach-versatile/core.c           | 2 ++
 arch/arm/mach-versatile/versatile_pb.c   | 2 ++
 6 files changed, 14 insertions(+)

diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
index 4da332b0314..b490ecc79de 100644
--- a/arch/arm/include/asm/mach/mmc.h
+++ b/arch/arm/include/asm/mach/mmc.h
@@ -10,6 +10,8 @@ struct mmc_platform_data {
 	unsigned int ocr_mask;			/* available voltages */
 	u32 (*translate_vdd)(struct device *, unsigned int);
 	unsigned int (*status)(struct device *);
+	int	gpio_wp;
+	int	gpio_cd;
 };
 
 #endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4ac04055c2e..69956cdae3c 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -403,6 +403,8 @@ static unsigned int mmc_status(struct device *dev)
 static struct mmc_platform_data mmc_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 static struct amba_device mmc_device = {
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 9ea9c05093c..17a07e6acfa 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -238,11 +238,15 @@ static unsigned int realview_mmc_status(struct device *dev)
 struct mmc_platform_data realview_mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 struct mmc_platform_data realview_mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 /*
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 3138d3955c9..585cc013639 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -156,6 +156,8 @@ int __devinit mmc_init(struct amba_device *adev)
 	mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
 	mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
 	mmci_card->mmc0_plat_data.status = mmc_status;
+	mmci_card->mmc0_plat_data.gpio_wp = -1;
+	mmci_card->mmc0_plat_data.gpio_cd = -1;
 
 	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
 
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 92273c95edf..afc0f87f3fa 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -373,6 +373,8 @@ unsigned int mmc_status(struct device *dev)
 static struct mmc_platform_data mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 /*
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 7419451fdf0..9af8d8154df 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -44,6 +44,8 @@
 static struct mmc_platform_data mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 static struct pl061_platform_data gpio2_plat_data = {
-- 
GitLab


From 89001446925d6da8785c3265a71316e34c6d15de Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 9 Jul 2009 15:16:07 +0100
Subject: [PATCH 024/257] MMC: MMCI: use gpiolib for card detect/write protect

Use gpiolib where available (and when valid GPIOs are provided) for
write protect/card detect status reporting.  We fall back to the old
'status' method where gpiolib support is not available.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/mmc/host/mmci.c | 63 +++++++++++++++++++++++++++++++++++++++--
 drivers/mmc/host/mmci.h |  2 ++
 2 files changed, 63 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index ac43f395eec..5eb86a8c943 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -21,6 +21,7 @@
 #include <linux/amba/bus.h>
 #include <linux/clk.h>
 #include <linux/scatterlist.h>
+#include <linux/gpio.h>
 
 #include <asm/cacheflush.h>
 #include <asm/div64.h>
@@ -472,17 +473,41 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	}
 }
 
+static int mmci_get_ro(struct mmc_host *mmc)
+{
+	struct mmci_host *host = mmc_priv(mmc);
+
+	if (host->gpio_wp == -ENOSYS)
+		return -ENOSYS;
+
+	return gpio_get_value(host->gpio_wp);
+}
+
+static int mmci_get_cd(struct mmc_host *mmc)
+{
+	struct mmci_host *host = mmc_priv(mmc);
+	unsigned int status;
+
+	if (host->gpio_cd == -ENOSYS)
+		status = host->plat->status(mmc_dev(host->mmc));
+	else
+		status = gpio_get_value(host->gpio_cd);
+
+	return !status;
+}
+
 static const struct mmc_host_ops mmci_ops = {
 	.request	= mmci_request,
 	.set_ios	= mmci_set_ios,
+	.get_ro		= mmci_get_ro,
+	.get_cd		= mmci_get_cd,
 };
 
 static void mmci_check_status(unsigned long data)
 {
 	struct mmci_host *host = (struct mmci_host *)data;
-	unsigned int status;
+	unsigned int status = mmci_get_cd(host->mmc);
 
-	status = host->plat->status(mmc_dev(host->mmc));
 	if (status ^ host->oldstat)
 		mmc_detect_change(host->mmc, 0);
 
@@ -516,6 +541,9 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	host = mmc_priv(mmc);
 	host->mmc = mmc;
 
+	host->gpio_wp = -ENOSYS;
+	host->gpio_cd = -ENOSYS;
+
 	host->hw_designer = amba_manf(dev);
 	host->hw_revision = amba_rev(dev);
 	DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
@@ -591,6 +619,25 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	writel(0, host->base + MMCIMASK1);
 	writel(0xfff, host->base + MMCICLEAR);
 
+	if (gpio_is_valid(plat->gpio_cd)) {
+		ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
+		if (ret == 0)
+			ret = gpio_direction_input(plat->gpio_cd);
+		if (ret == 0)
+			host->gpio_cd = plat->gpio_cd;
+		else if (ret != -ENOSYS)
+			goto err_gpio_cd;
+	}
+	if (gpio_is_valid(plat->gpio_wp)) {
+		ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
+		if (ret == 0)
+			ret = gpio_direction_input(plat->gpio_wp);
+		if (ret == 0)
+			host->gpio_wp = plat->gpio_wp;
+		else if (ret != -ENOSYS)
+			goto err_gpio_wp;
+	}
+
 	ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);
 	if (ret)
 		goto unmap;
@@ -602,6 +649,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
 
 	amba_set_drvdata(dev, mmc);
+	host->oldstat = mmci_get_cd(host->mmc);
 
 	mmc_add_host(mmc);
 
@@ -620,6 +668,12 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
  irq0_free:
 	free_irq(dev->irq[0], host);
  unmap:
+	if (host->gpio_wp != -ENOSYS)
+		gpio_free(host->gpio_wp);
+ err_gpio_wp:
+	if (host->gpio_cd != -ENOSYS)
+		gpio_free(host->gpio_cd);
+ err_gpio_cd:
 	iounmap(host->base);
  clk_disable:
 	clk_disable(host->clk);
@@ -655,6 +709,11 @@ static int __devexit mmci_remove(struct amba_device *dev)
 		free_irq(dev->irq[0], host);
 		free_irq(dev->irq[1], host);
 
+		if (host->gpio_wp != -ENOSYS)
+			gpio_free(host->gpio_wp);
+		if (host->gpio_cd != -ENOSYS)
+			gpio_free(host->gpio_cd);
+
 		iounmap(host->base);
 		clk_disable(host->clk);
 		clk_put(host->clk);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 0441bac1c0e..839f264c972 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -151,6 +151,8 @@ struct mmci_host {
 	struct mmc_data		*data;
 	struct mmc_host		*mmc;
 	struct clk		*clk;
+	int			gpio_cd;
+	int			gpio_wp;
 
 	unsigned int		data_xfered;
 
-- 
GitLab


From 02239f0a4264608686cc0015d906c7b2dead89df Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 8 Jul 2009 02:00:49 +0100
Subject: [PATCH 025/257] [ARM] 5577/2: ep93xx: syscon locked register
 functions

Add core functions to handle writes to the ep93xx software locked
registers.

There are a number of registers in the EP93xx System Controller
that require a write to the software lock register before they
can be updated. This patch adds a number of exported functions
to the ep93xx core that handle this access.

The software locked clock divider registers, VidClkDiv, MIRClkDiv,
I2SClkDiv and KeyTchClkDiv would typically involve writing a
specific value to the register. To support this the
ep93xx_syscon_swlocked_write() function is provided.

For the DeviceCfg register it's more typical to only need to
set or clear a single bit. A generic ep93xx_devcfg_set_clear()
function is provided to handle both operations. Two inline
functions, ep93xx_devcfg_set_bits() and ep93xx_devcfg_clear_bits()
are also provided to improve code readability.

In addition, the remaining bits in the System Controller Device
Config Register have been documented and the previously defined
names shortened.

All code paths that use this functionality have been updated
except for arch/arm/kernel/crunch.c. That code is in a context
switch path, which is not reentrant, so it is safe against itself.

Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/crunch.c                      | 13 +++--
 arch/arm/mach-ep93xx/clock.c                  | 24 +++++----
 arch/arm/mach-ep93xx/core.c                   | 52 +++++++++++++++----
 .../mach-ep93xx/include/mach/ep93xx-regs.h    | 36 +++++++++++--
 arch/arm/mach-ep93xx/include/mach/platform.h  | 16 ++++++
 arch/arm/mach-ep93xx/include/mach/system.h    | 12 ++---
 6 files changed, 118 insertions(+), 35 deletions(-)

diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 99995c2b231..769abe15cf9 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -31,7 +31,7 @@ void crunch_task_release(struct thread_info *thread)
 
 static int crunch_enabled(u32 devcfg)
 {
-	return !!(devcfg & EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE);
+	return !!(devcfg & EP93XX_SYSCON_DEVCFG_CPENA);
 }
 
 static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
@@ -56,11 +56,16 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
 		break;
 
 	case THREAD_NOTIFY_SWITCH:
-		devcfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+		devcfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
 		if (crunch_enabled(devcfg) || crunch_owner == crunch_state) {
-			devcfg ^= EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
+			/*
+			 * We don't use ep93xx_syscon_swlocked_write() here
+			 * because we are on the context switch path and
+			 * preemption is already disabled.
+			 */
+			devcfg ^= EP93XX_SYSCON_DEVCFG_CPENA;
 			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-			__raw_writel(devcfg, EP93XX_SYSCON_DEVICE_CONFIG);
+			__raw_writel(devcfg, EP93XX_SYSCON_DEVCFG);
 		}
 		break;
 	}
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 6c4c1633ed1..c7642acfd02 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -50,20 +50,20 @@ static unsigned long get_uart_rate(struct clk *clk);
 
 static struct clk clk_uart1 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U1EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart2 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U2EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart3 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U3EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_pll1;
@@ -160,9 +160,11 @@ int clk_enable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		value |= clk->enable_mask;
 		if (clk->sw_locked)
-			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-		__raw_writel(value | clk->enable_mask, clk->enable_reg);
+			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+		else
+			__raw_writel(value, clk->enable_reg);
 	}
 
 	return 0;
@@ -175,9 +177,11 @@ void clk_disable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		value &= ~clk->enable_mask;
 		if (clk->sw_locked)
-			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-		__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
+			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+		else
+			__raw_writel(value, clk->enable_reg);
 	}
 }
 EXPORT_SYMBOL(clk_disable);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 204dc5cbd0b..9399d3af990 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -384,6 +384,47 @@ void __init ep93xx_init_irq(void)
 }
 
 
+/*************************************************************************
+ * EP93xx System Controller Software Locked register handling
+ *************************************************************************/
+
+/*
+ * syscon_swlock prevents anything else from writing to the syscon
+ * block while a software locked register is being written.
+ */
+static DEFINE_SPINLOCK(syscon_swlock);
+
+void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&syscon_swlock, flags);
+
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(val, reg);
+
+	spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_syscon_swlocked_write);
+
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&syscon_swlock, flags);
+
+	val = __raw_readl(EP93XX_SYSCON_DEVCFG);
+	val |= set_bits;
+	val &= ~clear_bits;
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(val, EP93XX_SYSCON_DEVCFG);
+
+	spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
+
+
 /*************************************************************************
  * EP93xx peripheral handling
  *************************************************************************/
@@ -550,15 +591,8 @@ extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
 {
-	unsigned int v;
-
-	/*
-	 * Disallow access to MaverickCrunch initially.
-	 */
-	v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
-	v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
+	/* Disallow access to MaverickCrunch initially */
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
 
 	ep93xx_gpio_init();
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 49b256b3ddf..087d22b8f35 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -175,11 +175,37 @@
 #define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
 #define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
 #define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN		(1<<24)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	(1<<23)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN		(1<<20)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN		(1<<18)
+#define EP93XX_SYSCON_DEVCFG		EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVCFG_SWRST	(1<<31)
+#define EP93XX_SYSCON_DEVCFG_D1ONG	(1<<30)
+#define EP93XX_SYSCON_DEVCFG_D0ONG	(1<<29)
+#define EP93XX_SYSCON_DEVCFG_IONU2	(1<<28)
+#define EP93XX_SYSCON_DEVCFG_GONK	(1<<27)
+#define EP93XX_SYSCON_DEVCFG_TONG	(1<<26)
+#define EP93XX_SYSCON_DEVCFG_MONG	(1<<25)
+#define EP93XX_SYSCON_DEVCFG_U3EN	(1<<24)
+#define EP93XX_SYSCON_DEVCFG_CPENA	(1<<23)
+#define EP93XX_SYSCON_DEVCFG_A2ONG	(1<<22)
+#define EP93XX_SYSCON_DEVCFG_A1ONG	(1<<21)
+#define EP93XX_SYSCON_DEVCFG_U2EN	(1<<20)
+#define EP93XX_SYSCON_DEVCFG_EXVC	(1<<19)
+#define EP93XX_SYSCON_DEVCFG_U1EN	(1<<18)
+#define EP93XX_SYSCON_DEVCFG_TIN	(1<<17)
+#define EP93XX_SYSCON_DEVCFG_HC3IN	(1<<15)
+#define EP93XX_SYSCON_DEVCFG_HC3EN	(1<<14)
+#define EP93XX_SYSCON_DEVCFG_HC1IN	(1<<13)
+#define EP93XX_SYSCON_DEVCFG_HC1EN	(1<<12)
+#define EP93XX_SYSCON_DEVCFG_HONIDE	(1<<11)
+#define EP93XX_SYSCON_DEVCFG_GONIDE	(1<<10)
+#define EP93XX_SYSCON_DEVCFG_PONG	(1<<9)
+#define EP93XX_SYSCON_DEVCFG_EONIDE	(1<<8)
+#define EP93XX_SYSCON_DEVCFG_I2SONSSP	(1<<7)
+#define EP93XX_SYSCON_DEVCFG_I2SONAC97	(1<<6)
+#define EP93XX_SYSCON_DEVCFG_RASONP3	(1<<4)
+#define EP93XX_SYSCON_DEVCFG_RAS	(1<<3)
+#define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
+#define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
+#define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 05f0f4f2f3c..fb5e59a3ea0 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -15,8 +15,24 @@ struct ep93xx_eth_data
 void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
 void ep93xx_init_time(unsigned long);
+
+/* EP93xx System Controller software locked register write */
+void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg);
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
+
+static inline void ep93xx_devcfg_set_bits(unsigned int bits)
+{
+	ep93xx_devcfg_set_clear(bits, 0x00);
+}
+
+static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
+{
+	ep93xx_devcfg_set_clear(0x00, bits);
+}
+
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
 
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index ed8f35e4f06..6d661fe9d66 100644
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -11,15 +11,13 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	u32 devicecfg;
-
 	local_irq_disable();
 
-	devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+	/*
+	 * Set then clear the SWRST bit to initiate a software reset
+	 */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
 
 	while (1)
 		;
-- 
GitLab


From 701fac823e24676ea42451c6597f96d81d9b6aba Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Tue, 30 Jun 2009 23:06:43 +0100
Subject: [PATCH 026/257] [ARM] 5578/1: ep93xx: add ep93xx-keypad clock

Add clkdev support for the ep93xx_keypad driver.

A matrix keypad driver for the ep93xx just got merged via the
input subsystem group.  For this driver to work the keypad clock
needs to be added to the ep93xx clkdev support.  In order to
accomplish this the following changes are implemented:

  1) Move the EP93XX_EXT_*_RATE defines to mach/include/hardware.h.
  2) Add EP93XX_KEYTCHCLK_DIV{4/16} for the keypad driver.
  3) Add support for programmable clocks (set_rate() callback).
  4) Add clk_keypad for the keypad driver.
  5) tab indent the clk_lookup table for easier reading.
  6) Add the set_rate() callback to program the keypad clock.
     This callback is generalized since the ADC clock (touchscreen)
     can use the same callback.
  7) Use the ep93xx_syscon_swlocked_write() core function for updating
     the software locked register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c                 | 101 +++++++++++++------
 arch/arm/mach-ep93xx/include/mach/hardware.h |  14 +++
 2 files changed, 82 insertions(+), 33 deletions(-)

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index c7642acfd02..207e2769941 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -22,18 +22,6 @@
 #include <mach/hardware.h>
 
 
-/*
- * The EP93xx has two external crystal oscillators.  To generate the
- * required high-frequency clocks, the processor uses two phase-locked-
- * loops (PLLs) to multiply the incoming external clock signal to much
- * higher frequencies that are then divided down by programmable dividers
- * to produce the needed clocks.  The PLLs operate independently of one
- * another.
- */
-#define EP93XX_EXT_CLK_RATE	14745600
-#define EP93XX_EXT_RTC_RATE	32768
-
-
 struct clk {
 	unsigned long	rate;
 	int		users;
@@ -42,11 +30,14 @@ struct clk {
 	u32		enable_mask;
 
 	unsigned long	(*get_rate)(struct clk *clk);
+	int		(*set_rate)(struct clk *clk, unsigned long rate);
 };
 
 
 static unsigned long get_uart_rate(struct clk *clk);
 
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
+
 
 static struct clk clk_uart1 = {
 	.sw_locked	= 1,
@@ -75,6 +66,12 @@ static struct clk clk_usb_host = {
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
+static struct clk clk_keypad = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
+	.set_rate	= set_keytchclk_rate,
+};
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
@@ -130,27 +127,28 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
-	INIT_CK("apb:uart1", NULL, &clk_uart1),
-	INIT_CK("apb:uart2", NULL, &clk_uart2),
-	INIT_CK("apb:uart3", NULL, &clk_uart3),
-	INIT_CK(NULL, "pll1", &clk_pll1),
-	INIT_CK(NULL, "fclk", &clk_f),
-	INIT_CK(NULL, "hclk", &clk_h),
-	INIT_CK(NULL, "pclk", &clk_p),
-	INIT_CK(NULL, "pll2", &clk_pll2),
-	INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
-	INIT_CK(NULL, "m2p0", &clk_m2p0),
-	INIT_CK(NULL, "m2p1", &clk_m2p1),
-	INIT_CK(NULL, "m2p2", &clk_m2p2),
-	INIT_CK(NULL, "m2p3", &clk_m2p3),
-	INIT_CK(NULL, "m2p4", &clk_m2p4),
-	INIT_CK(NULL, "m2p5", &clk_m2p5),
-	INIT_CK(NULL, "m2p6", &clk_m2p6),
-	INIT_CK(NULL, "m2p7", &clk_m2p7),
-	INIT_CK(NULL, "m2p8", &clk_m2p8),
-	INIT_CK(NULL, "m2p9", &clk_m2p9),
-	INIT_CK(NULL, "m2m0", &clk_m2m0),
-	INIT_CK(NULL, "m2m1", &clk_m2m1),
+	INIT_CK("apb:uart1",		NULL,		&clk_uart1),
+	INIT_CK("apb:uart2",		NULL,		&clk_uart2),
+	INIT_CK("apb:uart3",		NULL,		&clk_uart3),
+	INIT_CK(NULL,			"pll1",		&clk_pll1),
+	INIT_CK(NULL,			"fclk",		&clk_f),
+	INIT_CK(NULL,			"hclk",		&clk_h),
+	INIT_CK(NULL,			"pclk",		&clk_p),
+	INIT_CK(NULL,			"pll2",		&clk_pll2),
+	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
+	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
+	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
+	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
+	INIT_CK(NULL,			"m2p2",		&clk_m2p2),
+	INIT_CK(NULL,			"m2p3",		&clk_m2p3),
+	INIT_CK(NULL,			"m2p4",		&clk_m2p4),
+	INIT_CK(NULL,			"m2p5",		&clk_m2p5),
+	INIT_CK(NULL,			"m2p6",		&clk_m2p6),
+	INIT_CK(NULL,			"m2p7",		&clk_m2p7),
+	INIT_CK(NULL,			"m2p8",		&clk_m2p8),
+	INIT_CK(NULL,			"m2p9",		&clk_m2p9),
+	INIT_CK(NULL,			"m2m0",		&clk_m2m0),
+	INIT_CK(NULL,			"m2m1",		&clk_m2m1),
 };
 
 
@@ -206,6 +204,43 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val;
+	u32 div_bit;
+
+	val = __raw_readl(clk->enable_reg);
+
+	/*
+	 * The Key Matrix and ADC clocks are configured using the same
+	 * System Controller register.  The clock used will be either
+	 * 1/4 or 1/16 the external clock rate depending on the
+	 * EP93XX_SYSCON_KEYTCHCLKDIV_KDIV/EP93XX_SYSCON_KEYTCHCLKDIV_ADIV
+	 * bit being set or cleared.
+	 */
+	div_bit = clk->enable_mask >> 15;
+
+	if (rate == EP93XX_KEYTCHCLK_DIV4)
+		val |= div_bit;
+	else if (rate == EP93XX_KEYTCHCLK_DIV16)
+		val &= ~div_bit;
+	else
+		return -EINVAL;
+
+	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
+	clk->rate = rate;
+	return 0;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	if (clk->set_rate)
+		return clk->set_rate(clk, rate);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
 
 static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
 static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 2866297310b..587c07bdec5 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -12,4 +12,18 @@
 
 #include "ts72xx.h"
 
+/*
+ * The EP93xx has two external crystal oscillators.  To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks.  The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE	14745600
+#define EP93XX_EXT_RTC_RATE	32768
+
+#define EP93XX_KEYTCHCLK_DIV4	(EP93XX_EXT_CLK_RATE / 4)
+#define EP93XX_KEYTCHCLK_DIV16	(EP93XX_EXT_CLK_RATE / 16)
+
 #endif
-- 
GitLab


From 583ddafe1787528d08b0026bb3273490a499b730 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 6 Jul 2009 17:39:50 +0100
Subject: [PATCH 027/257] [ARM] 5592/1: ep93xx: cleanup platform header
 includes

arch/arm/mach-ep93xx/include/mach/hardware.h
  1. Properly name the include files so that they are loaded
     from the <mach/*> directory and not the local directory.
  2. Remove including the ts72xx.h header.  This header is not
     generic to the ep93xx platform.  It should only be included
     by the ts72xx specific files that require it.  The only
     two users in the tree are arch/arm/mach-ep93xx/ts72xx.c
     and drivers/mtd/nand/ts7250.c.

arch/arm/mach-ep93xx/include/mach/ts72xx.h
  1. <linux/io.h> should already be included by any user of this
     header.  Doing the include here hides it from being needed
     by the calling source file.

arch/arm/mach-ep93xx/core.c
  1. Remove unnecessary headers.  They were probably included
     originally due to cut-and-paste from other files.
  2. <linux/io.h> should be included not <mach/gpio.h>

arch/arm/mach-ep93xx/adsphere.c
arch/arm/mach-ep93xx/edb93xx.c
arch/arm/mach-ep93xx/gesbc9312.c
arch/arm/mach-ep93xx/micro9.c
arch/arm/mach-ep93xx/ts72xx.c
  1. Remove unnecessary headers.

arch/arm/mach-ep93xx/ts72xx.c
  1. Remove unnecessary headers.
  2. Add platform specific header <mach/ts72xx.h>.

drivers/mtd/nand/ts7250.c
  1. <linux/io.h> should be included not <asm/io.h>.
  2. Add platform specific header <mach/ts72xx.h>.

Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/adssphere.c             | 11 ++++------
 arch/arm/mach-ep93xx/core.c                  | 23 +++-----------------
 arch/arm/mach-ep93xx/edb93xx.c               | 10 ++++-----
 arch/arm/mach-ep93xx/gesbc9312.c             | 11 ++++------
 arch/arm/mach-ep93xx/include/mach/hardware.h |  7 ++----
 arch/arm/mach-ep93xx/include/mach/ts72xx.h   |  1 -
 arch/arm/mach-ep93xx/micro9.c                | 11 +++-------
 arch/arm/mach-ep93xx/ts72xx.c                | 15 ++++++-------
 drivers/mtd/nand/ts7250.c                    |  5 ++++-
 9 files changed, 31 insertions(+), 63 deletions(-)

diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 3fbd9b0fbe2..caf6d5154ae 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -12,18 +12,15 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data adssphere_flash_data = {
 	.width		= 4,
 };
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 9399d3af990..ce10f5b5dfb 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -16,40 +16,23 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
 #include <linux/dma-mapping.h>
-#include <linux/time.h>
 #include <linux/timex.h>
-#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
 #include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <mach/gpio.h>
 
 #include <asm/hardware/vic.h>
 
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index e9e45b92457..73145ae5d3f 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -26,18 +26,16 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data edb93xx_flash_data;
 
 static struct resource edb93xx_flash_resource = {
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 3bad500b71b..3da7ca816d1 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -12,18 +12,15 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data gesbc9312_flash_data = {
 	.width		= 4,
 };
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 587c07bdec5..349fa7cb72d 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -4,14 +4,11 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include "ep93xx-regs.h"
+#include <mach/ep93xx-regs.h>
+#include <mach/platform.h>
 
 #define pcibios_assign_all_busses()	0
 
-#include "platform.h"
-
-#include "ts72xx.h"
-
 /*
  * The EP93xx has two external crystal oscillators.  To generate the
  * required high-frequency clocks, the processor uses two phase-locked-
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 34ddec081c4..2737666e800 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -70,7 +70,6 @@
 
 
 #ifndef __ASSEMBLY__
-#include <linux/io.h>
 
 static inline int board_is_ts7200(void)
 {
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 15d6815d78c..0a313e82fb7 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -9,21 +9,16 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
 #include <linux/kernel.h>
-#include <linux/mm.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
 #include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 
-#include <asm/mach/arch.h>
 #include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
 
 static struct ep93xx_eth_data micro9_eth_data = {
 	.phy_id		= 0x1f,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 7ee024d3482..5255dddd306 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -12,19 +12,18 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/m48t86.h>
 #include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/m48t86.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+#include <mach/ts72xx.h>
+
 #include <asm/mach-types.h>
-#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
 
 static struct map_desc ts72xx_io_desc[] __initdata = {
 	{
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
index 2c410a01131..0f5562aeedc 100644
--- a/drivers/mtd/nand/ts7250.c
+++ b/drivers/mtd/nand/ts7250.c
@@ -24,8 +24,11 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
-#include <asm/io.h>
+#include <linux/io.h>
+
 #include <mach/hardware.h>
+#include <mach/ts72xx.h>
+
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
 
-- 
GitLab


From c3e3baddbc0b6636b01cb2aa3e44505ad61be17b Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 6 Jul 2009 17:40:53 +0100
Subject: [PATCH 028/257] [ARM] 5593/1: ep93xx: clock.c __iomem pointer

To ensure typesafe io, the enable_reg variable should be a
void __iomem pointer not u32.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 207e2769941..b6b53447b1b 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -26,7 +26,7 @@ struct clk {
 	unsigned long	rate;
 	int		users;
 	int		sw_locked;
-	u32		enable_reg;
+	void __iomem	*enable_reg;
 	u32		enable_mask;
 
 	unsigned long	(*get_rate)(struct clk *clk);
-- 
GitLab


From 19c0a7286f3f0093bbbbcdce0af4c3205421b608 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Sat, 4 Jul 2009 12:26:33 +0100
Subject: [PATCH 029/257] [ARM] 5591/1: Add group irq enable/disable for
 w90p910 platform.

Add group irq enable/disable for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/irq.c | 154 ++++++++++++++++++++++++++++++++++--
 1 file changed, 146 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index 0b4fc194729..a296c9b81d2 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -10,8 +10,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -29,9 +28,114 @@
 #include <mach/hardware.h>
 #include <mach/regs-irq.h>
 
+struct group_irq {
+	unsigned long		gpen;
+	unsigned int		enabled;
+	void			(*enable)(struct group_irq *, int enable);
+};
+
+static DEFINE_SPINLOCK(groupirq_lock);
+
+#define DEFINE_GROUP(_name, _ctrlbit, _num)			\
+struct group_irq group_##_name = {				\
+		.enable		= w90x900_group_enable,		\
+		.gpen		= ((2 ^ _num) - 1) << _ctrlbit,	\
+	}
+
+static void w90x900_group_enable(struct group_irq *gpirq, int enable);
+
+static DEFINE_GROUP(nirq0, 0, 4);
+static DEFINE_GROUP(nirq1, 4, 4);
+static DEFINE_GROUP(usbh, 8, 2);
+static DEFINE_GROUP(ottimer, 16, 3);
+static DEFINE_GROUP(gdma, 20, 2);
+static DEFINE_GROUP(sc, 24, 2);
+static DEFINE_GROUP(i2c, 26, 2);
+static DEFINE_GROUP(ps2, 28, 2);
+
+static int group_irq_enable(struct group_irq *group_irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&groupirq_lock, flags);
+	if (group_irq->enabled++ == 0)
+		(group_irq->enable)(group_irq, 1);
+	spin_unlock_irqrestore(&groupirq_lock, flags);
+
+	return 0;
+}
+
+static void group_irq_disable(struct group_irq *group_irq)
+{
+	unsigned long flags;
+
+	WARN_ON(group_irq->enabled == 0);
+
+	spin_lock_irqsave(&groupirq_lock, flags);
+	if (--group_irq->enabled == 0)
+		(group_irq->enable)(group_irq, 0);
+	spin_unlock_irqrestore(&groupirq_lock, flags);
+}
+
+static void w90x900_group_enable(struct group_irq *gpirq, int enable)
+{
+	unsigned int groupen = gpirq->gpen;
+	unsigned long regval;
+
+	regval = __raw_readl(REG_AIC_GEN);
+
+	if (enable)
+		regval |= groupen;
+	else
+		regval &= ~groupen;
+
+	__raw_writel(regval, REG_AIC_GEN);
+}
+
 static void w90x900_irq_mask(unsigned int irq)
 {
+	struct group_irq *group_irq;
+
+	group_irq = NULL;
+
 	__raw_writel(1 << irq, REG_AIC_MDCR);
+
+	switch (irq) {
+	case IRQ_GROUP0:
+		group_irq = &group_nirq0;
+		break;
+
+	case IRQ_GROUP1:
+		group_irq = &group_nirq1;
+		break;
+
+	case IRQ_USBH:
+		group_irq = &group_usbh;
+		break;
+
+	case IRQ_T_INT_GROUP:
+		group_irq = &group_ottimer;
+		break;
+
+	case IRQ_GDMAGROUP:
+		group_irq = &group_gdma;
+		break;
+
+	case IRQ_SCGROUP:
+		group_irq = &group_sc;
+		break;
+
+	case IRQ_I2CGROUP:
+		group_irq = &group_i2c;
+		break;
+
+	case IRQ_P2SGROUP:
+		group_irq = &group_ps2;
+		break;
+	}
+
+	if (group_irq)
+		group_irq_disable(group_irq);
 }
 
 /*
@@ -46,14 +150,48 @@ static void w90x900_irq_ack(unsigned int irq)
 
 static void w90x900_irq_unmask(unsigned int irq)
 {
-	unsigned long mask;
+	struct group_irq *group_irq;
+
+	group_irq = NULL;
 
-	if (irq == IRQ_T_INT_GROUP) {
-		mask = __raw_readl(REG_AIC_GEN);
-		__raw_writel(TIME_GROUP_IRQ | mask, REG_AIC_GEN);
-		__raw_writel(1 << IRQ_T_INT_GROUP, REG_AIC_MECR);
-	}
 	__raw_writel(1 << irq, REG_AIC_MECR);
+
+	switch (irq) {
+	case IRQ_GROUP0:
+		group_irq = &group_nirq0;
+		break;
+
+	case IRQ_GROUP1:
+		group_irq = &group_nirq1;
+		break;
+
+	case IRQ_USBH:
+		group_irq = &group_usbh;
+		break;
+
+	case IRQ_T_INT_GROUP:
+		group_irq = &group_ottimer;
+		break;
+
+	case IRQ_GDMAGROUP:
+		group_irq = &group_gdma;
+		break;
+
+	case IRQ_SCGROUP:
+		group_irq = &group_sc;
+		break;
+
+	case IRQ_I2CGROUP:
+		group_irq = &group_i2c;
+		break;
+
+	case IRQ_P2SGROUP:
+		group_irq = &group_ps2;
+		break;
+	}
+
+	if (group_irq)
+		group_irq_enable(group_irq);
 }
 
 static struct irq_chip w90x900_irq_chip = {
-- 
GitLab


From d7dbf6ea40a2859adaca2dfdbbea83f3d6c73c2f Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@sirena.org.uk>
Date: Wed, 8 Jul 2009 21:12:20 +0100
Subject: [PATCH 030/257] [ARM] 5596/1: at91sam9g20-ek: Register WM8731 in
 board file

The WM8731 driver has been updated to allow registration via normal
device model methods rather than from within the ASoC driver probe
so update the AT91SAM9G20-EK to make use of this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9g20ek.c |  1 +
 sound/soc/atmel/sam9g20_wm8731.c     | 36 ----------------------------
 2 files changed, 1 insertion(+), 36 deletions(-)

diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index cc270beadd5..4c259870088 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -221,6 +221,7 @@ static struct gpio_led ek_leds[] = {
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c512", 0x50),
+		I2C_BOARD_INFO("wm8731", 0x1b),
 	},
 };
 
diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
index 173a239a541..bb0db55e0e9 100644
--- a/sound/soc/atmel/sam9g20_wm8731.c
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -281,38 +281,6 @@ static struct snd_soc_card snd_soc_at91sam9g20ek = {
 	.set_bias_level = at91sam9g20ek_set_bias_level,
 };
 
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8731 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8731_i2c_register(void)
-{
-	struct i2c_board_info info;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	info.addr = 0x1b;
-	strlcpy(info.type, "wm8731", I2C_NAME_SIZE);
-
-	adapter = i2c_get_adapter(0);
-	if (!adapter) {
-		printk(KERN_ERR "can't get i2c adapter 0\n");
-		return -ENODEV;
-	}
-
-	client = i2c_new_device(adapter, &info);
-	i2c_put_adapter(adapter);
-	if (!client) {
-		printk(KERN_ERR "can't add i2c device at 0x%x\n",
-			(unsigned int)info.addr);
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
 static struct snd_soc_device at91sam9g20ek_snd_devdata = {
 	.card = &snd_soc_at91sam9g20ek,
 	.codec_dev = &soc_codec_dev_wm8731,
@@ -367,10 +335,6 @@ static int __init at91sam9g20ek_init(void)
 	}
 	ssc_p->ssc = ssc;
 
-	ret = wm8731_i2c_register();
-	if (ret != 0)
-		goto err_ssc;
-
 	at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!at91sam9g20ek_snd_device) {
 		printk(KERN_ERR "ASoC: Platform device allocation failed\n");
-- 
GitLab


From 13892cf95d2edf0d3c4285cc2d0113efa73be723 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 9 Jul 2009 20:56:14 +0100
Subject: [PATCH 031/257] [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 37 +++++++++++++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 33026eff2aa..30af4329469 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Jun 20 22:28:39 2009
+# Last update: Thu Jul 9 20:56:13 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1769,7 +1769,7 @@ mx31cicada		MACH_MX31CICADA		MX31CICADA		1777
 mi424wr			MACH_MI424WR		MI424WR			1778
 axs_ultrax		MACH_AXS_ULTRAX		AXS_ULTRAX		1779
 at572d940deb		MACH_AT572D940DEB	AT572D940DEB		1780
-davinci_da8xx_evm	MACH_DAVINCI_DA8XX_EVM	DAVINCI_DA8XX_EVM	1781
+davinci_da830_evm	MACH_DAVINCI_DA830_EVM	DAVINCI_DA830_EVM	1781
 ep9302			MACH_EP9302		EP9302			1782
 at572d940hfek		MACH_AT572D940HFEB	AT572D940HFEB		1783
 cybook3			MACH_CYBOOK3		CYBOOK3			1784
@@ -2280,3 +2280,36 @@ htcrhodium		MACH_HTCRHODIUM		HTCRHODIUM		2292
 htctopaz		MACH_HTCTOPAZ		HTCTOPAZ		2293
 matrix504		MACH_MATRIX504		MATRIX504		2294
 mrfsa			MACH_MRFSA		MRFSA			2295
+sc_p270			MACH_SC_P270		SC_P270			2296
+atlas5_evb		MACH_ATLAS5_EVB		ATLAS5_EVB		2297
+pelco_lobox		MACH_PELCO_LOBOX	PELCO_LOBOX		2298
+dilax_pcu200		MACH_DILAX_PCU200	DILAX_PCU200		2299
+leonardo		MACH_LEONARDO		LEONARDO		2300
+zoran_approach7		MACH_ZORAN_APPROACH7	ZORAN_APPROACH7		2301
+dp6xx			MACH_DP6XX		DP6XX			2302
+bcm2153_vesper		MACH_BCM2153_VESPER	BCM2153_VESPER		2303
+mahimahi		MACH_MAHIMAHI		MAHIMAHI		2304
+clickc			MACH_CLICKC		CLICKC			2305
+zb_gateway		MACH_ZB_GATEWAY		ZB_GATEWAY		2306
+tazcard			MACH_TAZCARD		TAZCARD			2307
+tazdev			MACH_TAZDEV		TAZDEV			2308
+annax_cb_arm		MACH_ANNAX_CB_ARM	ANNAX_CB_ARM		2309
+annax_dm3		MACH_ANNAX_DM3		ANNAX_DM3		2310
+cerebric		MACH_CEREBRIC		CEREBRIC		2311
+orca			MACH_ORCA		ORCA			2312
+pc9260			MACH_PC9260		PC9260			2313
+ems285a			MACH_EMS285A		EMS285A			2314
+gec2410			MACH_GEC2410		GEC2410			2315
+gec2440			MACH_GEC2440		GEC2440			2316
+mw903			MACH_ARCH_MW903		ARCH_MW903		2317
+mw2440			MACH_MW2440		MW2440			2318
+ecac2378		MACH_ECAC2378		ECAC2378		2319
+tazkiosk		MACH_TAZKIOSK		TAZKIOSK		2320
+whiterabbit_mch		MACH_WHITERABBIT_MCH	WHITERABBIT_MCH		2321
+sbox9263		MACH_SBOX9263		SBOX9263		2322
+oreo			MACH_OREO		OREO			2323
+smdk6442		MACH_SMDK6442		SMDK6442		2324
+openrd_base		MACH_OPENRD_BASE	OPENRD_BASE		2325
+incredible		MACH_INCREDIBLE		INCREDIBLE		2326
+incrediblec		MACH_INCREDIBLEC	INCREDIBLEC		2327
+heroct			MACH_HEROCT		HEROCT			2328
-- 
GitLab


From 0724915a69433716704bc5de6f729d3751981be6 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 11 Jul 2009 09:33:21 +0800
Subject: [PATCH 032/257] [ARM] remove duplicated #include

Remove duplicated #include('s) in
  drivers/spi/amba-pl022.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/spi/amba-pl022.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index da76797ce8b..c0f950a7cbe 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -38,14 +38,12 @@
 #include <linux/interrupt.h>
 #include <linux/spi/spi.h>
 #include <linux/workqueue.h>
-#include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
-#include <linux/delay.h>
 
 /*
  * This macro is used to define some register default values.
-- 
GitLab


From ee0049d49ad2556222a7b3127be2dae11982f7b3 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 11 Jul 2009 09:31:58 +0800
Subject: [PATCH 033/257] [ARM] remove duplicated #include

Remove duplicated #include('s) in
  arch/arm/mach-mx3/devices.c
  arch/arm/mach-omap1/mcbsp.c
  arch/arm/mach-omap2/mcbsp.c
  arch/arm/plat-stmp3xxx/pinmux.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-mx3/devices.c     | 1 -
 arch/arm/mach-omap1/mcbsp.c     | 1 -
 arch/arm/mach-omap2/mcbsp.c     | 1 -
 arch/arm/plat-stmp3xxx/pinmux.c | 1 -
 4 files changed, 4 deletions(-)

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index d927eddcad4..9e87e08fb12 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index a2d7814896b..505d98cfe50 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f0435cd..99b6e154631 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
index d4120038220..6d6b1a468ed 100644
--- a/arch/arm/plat-stmp3xxx/pinmux.c
+++ b/arch/arm/plat-stmp3xxx/pinmux.c
@@ -22,7 +22,6 @@
 #include <linux/sysdev.h>
 #include <linux/string.h>
 #include <linux/bitops.h>
-#include <linux/sysdev.h>
 #include <linux/irq.h>
 
 #include <mach/hardware.h>
-- 
GitLab


From f7a55fa6ecef8be6d15bd79a803e44a3187ce9d6 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 11 Jul 2009 16:51:40 +0100
Subject: [PATCH 034/257] [ARM] remove L_PTE_BUFFERABLE and L_PTE_CACHEABLE

These old symbols are meaningless now that we have memory type
support implemented.  The entire memory type field needs to be
modified rather than just a few bits twiddled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/pgtable.h | 2 --
 arch/arm/mm/proc-macros.S      | 6 ------
 2 files changed, 8 deletions(-)

diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index c433c6c7311..d575666d5c4 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -164,8 +164,6 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
 #define L_PTE_PRESENT		(1 << 0)
 #define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
 #define L_PTE_YOUNG		(1 << 1)
-#define L_PTE_BUFFERABLE	(1 << 2)	/* obsolete, matches PTE */
-#define L_PTE_CACHEABLE		(1 << 3)	/* obsolete, matches PTE */
 #define L_PTE_DIRTY		(1 << 6)
 #define L_PTE_WRITE		(1 << 7)
 #define L_PTE_USER		(1 << 8)
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 54b1f721dec..a0b3f36f317 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -80,12 +80,6 @@
 #if L_PTE_SHARED != PTE_EXT_SHARED
 #error PTE shared bit mismatch
 #endif
-#if L_PTE_BUFFERABLE != PTE_BUFFERABLE
-#error PTE bufferable bit mismatch
-#endif
-#if L_PTE_CACHEABLE != PTE_CACHEABLE
-#error PTE cacheable bit mismatch
-#endif
 #if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\
      L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
 #error Invalid Linux PTE bit settings
-- 
GitLab


From 6a00cded91532f3d58e07729ba56269339281d8e Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 11 Jul 2009 16:57:20 +0100
Subject: [PATCH 035/257] [ARM] pgtable: rearrange file PTE bit allocation

For future compatibility, we need to ensure that swap and file Linux
PTEs conform with the hardware PTEs "fault" encoding.  Swap PTEs
already fit in with this, but file PTEs do not.  Shift them by one
bit to ensure that they conform, using bit 2 to distinguish between
swap and file PTEs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/pgtable.h | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index d575666d5c4..9655bce3d34 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -162,8 +162,8 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
  * entries are stored 1024 bytes below.
  */
 #define L_PTE_PRESENT		(1 << 0)
-#define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
 #define L_PTE_YOUNG		(1 << 1)
+#define L_PTE_FILE		(1 << 2)	/* only when !PRESENT */
 #define L_PTE_DIRTY		(1 << 6)
 #define L_PTE_WRITE		(1 << 7)
 #define L_PTE_USER		(1 << 8)
@@ -379,13 +379,13 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <--------------- offset --------------------> <--- type --> 0 0
+ *   <--------------- offset --------------------> <- type --> 0 0 0
  *
- * This gives us up to 127 swap files and 32GB per swap file.  Note that
+ * This gives us up to 63 swap files and 32GB per swap file.  Note that
  * the offset field is always non-zero.
  */
-#define __SWP_TYPE_SHIFT	2
-#define __SWP_TYPE_BITS		7
+#define __SWP_TYPE_SHIFT	3
+#define __SWP_TYPE_BITS		6
 #define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
 #define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
 
@@ -409,13 +409,13 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <------------------------ offset -------------------------> 1 0
+ *   <----------------------- offset ------------------------> 1 0 0
  */
 #define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 2)
-#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 3)
+#define pgoff_to_pte(x)		__pte(((x) << 3) | L_PTE_FILE)
 
-#define PTE_FILE_MAX_BITS	30
+#define PTE_FILE_MAX_BITS	29
 
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 /* FIXME: this is not correct */
-- 
GitLab


From 5396730b3caad500ceba84c9391143cafb5938a8 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Thu, 9 Jul 2009 23:22:07 +0100
Subject: [PATCH 036/257] [ARM] 5598/1: ep93xx: core.c typesafe vic_init

The EP93XX_VIC{1/2}_BASE defines are now typesafe due to
[ARM] 5573/1: ep93xx: ensure typesafe io.  The (void *) cast
is not needed when calling vic_init().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index ce10f5b5dfb..68ac0545f57 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -345,8 +345,8 @@ void __init ep93xx_init_irq(void)
 {
 	int gpio_irq;
 
-	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
-	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 
 	for (gpio_irq = gpio_to_irq(0);
 	     gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
-- 
GitLab


From d19d36672ee379f26b79df985a9a2e5afb3f1df1 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 10 Jul 2009 23:02:59 +0100
Subject: [PATCH 037/257] [ARM] 5599/1: MAINTAINERS: update for EP93XX ARM

Change the maintainer of the EP93XX ARM ARCHITECTURE.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 MAINTAINERS | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index fa2a16def17..7bf1128d74f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -604,10 +604,14 @@ W:	http://maxim.org.za/at91_26.html
 S:	Maintained
 
 ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+P:	Hartley Sweeten
+M:	hsweeten@visionengravers.com
+P:	Ryan Mallon
+M:	ryan@bluewatersys.com
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
+F:	arch/arm/mach-ep93xx/
+F:	arch/arm/mach-ep93xx/include/mach/
 
 ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
 P:	Lennert Buytenhek
-- 
GitLab


From 5b1c3c858cff4da95b9f7091eef424e706784cab Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 13 Jul 2009 19:50:10 +0100
Subject: [PATCH 038/257] [ARM] 5600/1: ep93xx: core.c remove cast when copying
 dev_addr

The MAC address for the ep93xx ethernet driver can be optionally
copied from registers in the controller when booting.  Due to
[ARM] 5573/1: ep93xx: ensure typesafe io, the cast for the source
address is no longer needed.

EP93XX_ETHERNET_BASE is typed as a (void __iomem __force *) so
memcpy_fromio() needs to be used instead of memcpy().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 68ac0545f57..4c38941a92c 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -541,10 +541,8 @@ static struct platform_device ep93xx_eth_device = {
 
 void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 {
-	if (copy_addr) {
-		memcpy(data->dev_addr,
-			(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
-	}
+	if (copy_addr)
+		memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
 
 	ep93xx_eth_data = *data;
 	platform_device_register(&ep93xx_eth_device);
-- 
GitLab


From 595c050d89e91e91cca3845e48b01042677bd19e Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Wed, 15 Jul 2009 21:31:46 +0100
Subject: [PATCH 039/257] [ARM] 5605/1: Fix ep93xx gpio.c headers

Fix a number of build errors in ep93xx gpio.c due to to missing irq.h

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/gpio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 2d83d69e2ee..1ea8871e03a 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -18,6 +18,7 @@
 #include <linux/seq_file.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/irq.h>
 
 #include <mach/hardware.h>
 
-- 
GitLab


From fbeeea5386ab213bd55b223f3a75c823fccd6df5 Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Wed, 15 Jul 2009 21:51:59 +0100
Subject: [PATCH 040/257] [ARM] 5607/1: ep93xx: Use __iomem pointer on syscon
 write function

Change the reg argument of the ep93xx_syscon_swlocked_write function
to be an __iomem pointer. Fixes a number of build warnings.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c                  | 2 +-
 arch/arm/mach-ep93xx/include/mach/platform.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 4c38941a92c..b390c35f8bc 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -377,7 +377,7 @@ void __init ep93xx_init_irq(void)
  */
 static DEFINE_SPINLOCK(syscon_swlock);
 
-void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg)
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
 {
 	unsigned long flags;
 
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index fb5e59a3ea0..0af0a3ba704 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -17,7 +17,7 @@ void ep93xx_init_irq(void);
 void ep93xx_init_time(unsigned long);
 
 /* EP93xx System Controller software locked register write */
-void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg);
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
 void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
 
 static inline void ep93xx_devcfg_set_bits(unsigned int bits)
-- 
GitLab


From 5d43f11bcf854d83b24c7ca6bb15d9ab9130159f Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Thu, 16 Jul 2009 22:46:31 +0100
Subject: [PATCH 041/257] [ARM] 5609/1: ep93xx: add register defines for keypad
 support

Add missing register defines for ep93xx keypad clock support.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 087d22b8f35..a11ae779baa 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -206,6 +206,11 @@
 #define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
 #define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
 #define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
+#define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
-- 
GitLab


From d2c241955095b129459985a8c02d85b70984b945 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Tue, 14 Jul 2009 15:09:54 +0100
Subject: [PATCH 042/257] [ARM] 5601/1: Add HAVE_CLK depends on for w90p910
 platform

Add HAVE_CLK depends on for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..c3fed1ee730 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -493,6 +493,7 @@ config ARCH_W90X900
 	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_GPIO
+	select HAVE_CLK
 	select COMMON_CLKDEV
 	help
 		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-- 
GitLab


From db58e90fdbe9d12b431ae8d8e856961ce75d74f0 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Tue, 14 Jul 2009 15:10:43 +0100
Subject: [PATCH 043/257] [ARM] 5602/1: Add sub clock api for w90p910 platform

Add sub clock api for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/clock.c   | 18 ++++++++++++++++++
 arch/arm/mach-w90x900/clock.h   |  8 ++++++++
 arch/arm/mach-w90x900/w90p910.c |  6 ++++++
 3 files changed, 32 insertions(+)

diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index f420613cd39..49cf1fbc14e 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -25,6 +25,8 @@
 
 #include "clock.h"
 
+#define SUBCLK 0x24
+
 static DEFINE_SPINLOCK(clocks_lock);
 
 int clk_enable(struct clk *clk)
@@ -68,6 +70,22 @@ void w90x900_clk_enable(struct clk *clk, int enable)
 	__raw_writel(clken, W90X900_VA_CLKPWR);
 }
 
+void w90x900_subclk_enable(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->cken;
+	unsigned long clken;
+
+	clken = __raw_readl(W90X900_VA_CLKPWR + SUBCLK);
+
+	if (enable)
+		clken |= clocks;
+	else
+		clken &= ~clocks;
+
+	__raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK);
+}
+
+
 void clks_register(struct clk_lookup *clks, size_t num)
 {
 	int i;
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index 4f27bda76d5..d2f0e50a70b 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -13,6 +13,7 @@
 #include <asm/clkdev.h>
 
 void w90x900_clk_enable(struct clk *clk, int enable);
+void w90x900_subclk_enable(struct clk *clk, int enable);
 void clks_register(struct clk_lookup *clks, size_t num);
 
 struct clk {
@@ -27,6 +28,13 @@ struct clk clk_##_name = {				\
 		.cken	= (1 << _ctrlbit),		\
 	}
 
+#define DEFINE_SUBCLK(_name, _ctrlbit)			\
+struct clk clk_##_name = {				\
+		.enable	= w90x900_subclk_enable,	\
+		.cken	= (1 << _ctrlbit),		\
+	}
+
+
 #define DEF_CLKLOOK(_clk, _devname, _conname)		\
 	{						\
 		.clk		= _clk,			\
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 1c97e4930b7..1bde69eac3d 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -57,9 +57,12 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 static DEFINE_CLK(lcd, 0);
 static DEFINE_CLK(audio, 1);
 static DEFINE_CLK(fmi, 4);
+static DEFINE_SUBCLK(ms, 0);
+static DEFINE_SUBCLK(sd, 1);
 static DEFINE_CLK(dmac, 5);
 static DEFINE_CLK(atapi, 6);
 static DEFINE_CLK(emc, 7);
+static DEFINE_SUBCLK(rmii, 2);
 static DEFINE_CLK(usbd, 8);
 static DEFINE_CLK(usbh, 9);
 static DEFINE_CLK(g2d, 10);;
@@ -75,9 +78,12 @@ static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
 	DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
 	DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
+	DEF_CLKLOOK(&clk_ms, "w90p910-fmi", "MS"),
+	DEF_CLKLOOK(&clk_sd, "w90p910-fmi", "SD"),
 	DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
 	DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
 	DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
+	DEF_CLKLOOK(&clk_rmii, "w90p910-emc", "RMII"),
 	DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
 	DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
 	DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
-- 
GitLab


From 0abe1856bdb68ef699c00949cf9f81fbec98d499 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Tue, 14 Jul 2009 15:12:26 +0100
Subject: [PATCH 044/257] [ARM] 5604/1: Add keypad multi-function pin api for
 w90p910 platform

Add keypad multi-function pin api for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mfp-w90p910.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
index a3520fefb5e..8aec34b044c 100644
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -90,7 +90,7 @@ void mfp_set_groupc(struct device *dev)
 }
 EXPORT_SYMBOL(mfp_set_groupc);
 
-void mfp_set_groupi(struct device *dev, int gpio)
+void mfp_set_groupi(struct device *dev)
 {
 	unsigned long mfpen;
 	const char *dev_id;
@@ -103,10 +103,14 @@ void mfp_set_groupi(struct device *dev, int gpio)
 
 	mfpen = __raw_readl(REG_MFSEL);
 
+	mfpen &= ~GPSELEI1;/*default gpio16*/
+
 	if (strcmp(dev_id, "w90p910-wdog") == 0)
 		mfpen |= GPSELEI1;/*enable wdog*/
 		else if (strcmp(dev_id, "w90p910-atapi") == 0)
 			mfpen |= GPSELEI0;/*enable atapi*/
+			else if (strcmp(dev_id, "w90p910-keypad") == 0)
+				mfpen &= ~GPSELEI0;/*enable keypad*/
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-- 
GitLab


From c197cec5fae7968a7154ee999f0a1b07938d1528 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:25 +0100
Subject: [PATCH 045/257] ARM: S3C: Update hwmon device definition and name

Change the hwmon device name to something more generic as this
should be functional for both the s3c24xx and s3c64xx archs.

Since it has yet to have a driver, it is pretty safe to change
as there are no extant users.

Also add the necessary entry in devs.h which seems to have been
missed  out at somepoint.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/devs.h | 2 ++
 arch/arm/plat-s3c24xx/devs.c          | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 2e170827e0b..1989ca1bb2b 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -46,6 +46,8 @@ extern struct platform_device s3c_device_hsmmc2;
 extern struct platform_device s3c_device_spi0;
 extern struct platform_device s3c_device_spi1;
 
+extern struct platform_device s3c_device_hwmon;
+
 extern struct platform_device s3c_device_nand;
 
 extern struct platform_device s3c_device_usbgadget;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..3489019b537 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -348,7 +348,7 @@ struct platform_device s3c_device_adc = {
 /* HWMON */
 
 struct platform_device s3c_device_hwmon = {
-	.name		= "s3c24xx-hwmon",
+	.name		= "s3c-hwmon",
 	.id		= -1,
 	.dev.parent	= &s3c_device_adc.dev,
 };
-- 
GitLab


From 885f9ebe7554628967b6e93b284dd3021e1bb280 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:26 +0100
Subject: [PATCH 046/257] ARM: BAST: Add hwmon device information

Add platform device information for the ADC channels to be exported
via HWMON. This exports all the ADCs not being used for the touchscreen
interface.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/mach-bast.c | 32 +++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ce3baba2cd7..06670bb89ca 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -45,6 +45,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 
+#include <plat/hwmon.h>
 #include <plat/nand.h>
 #include <plat/iic.h>
 #include <mach/fb.h>
@@ -547,7 +548,35 @@ static struct i2c_board_info bast_i2c_devs[] __initdata = {
 	},
 };
 
+static struct s3c_hwmon_pdata bast_hwmon_info = {
+	/* LCD contrast (0-6.6V) */
+	.in[0] = &(struct s3c_hwmon_chcfg) {
+		.name		= "lcd-contrast",
+		.mult		= 3300,
+		.div		= 512,
+	},
+	/* LED current feedback */
+	.in[1] = &(struct s3c_hwmon_chcfg) {
+		.name		= "led-feedback",
+		.mult		= 3300,
+		.div		= 1024,
+	},
+	/* LCD feedback (0-6.6V) */
+	.in[2] = &(struct s3c_hwmon_chcfg) {
+		.name		= "lcd-feedback",
+		.mult		= 3300,
+		.div		= 512,
+	},
+	/* Vcore (1.8-2.0V), Vref 3.3V  */
+	.in[3] = &(struct s3c_hwmon_chcfg) {
+		.name		= "vcore",
+		.mult		= 3300,
+		.div		= 1024,
+	},
+};
+
 /* Standard BAST devices */
+// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
 	&s3c_device_usb,
@@ -556,6 +585,8 @@ static struct platform_device *bast_devices[] __initdata = {
 	&s3c_device_i2c0,
  	&s3c_device_rtc,
 	&s3c_device_nand,
+	&s3c_device_adc,
+	&s3c_device_hwmon,
 	&bast_device_dm9k,
 	&bast_device_asix,
 	&bast_device_axpp,
@@ -588,6 +619,7 @@ static void __init bast_map_io(void)
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
+	s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
-- 
GitLab


From e170adcb406504b8acd35554c69830c11916be1f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:27 +0100
Subject: [PATCH 047/257] ARM: S3C: Add ADC synchronous read call.

To add HWMON support, we need a synchronous read() call that blocks
until completion. Add the client that is being service to the select
and convert callbacks to make the code easier.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/adc.h |  8 +++-
 arch/arm/plat-s3c24xx/adc.c          | 64 +++++++++++++++++++++++-----
 2 files changed, 59 insertions(+), 13 deletions(-)

diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index d847bd476b6..5f3b1cd53b9 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,14 @@ struct s3c_adc_client;
 extern int s3c_adc_start(struct s3c_adc_client *client,
 			 unsigned int channel, unsigned int nr_samples);
 
+extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
+
 extern struct s3c_adc_client *
 	s3c_adc_register(struct platform_device *pdev,
-			 void (*select)(unsigned selected),
-			 void (*conv)(unsigned d0, unsigned d1,
+			 void (*select)(struct s3c_adc_client *client,
+					unsigned selected),
+			 void (*conv)(struct s3c_adc_client *client,
+				      unsigned d0, unsigned d1,
 				      unsigned *samples_left),
 			 unsigned int is_ts);
 
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index ee1baf11ad9..11117a7ba91 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -39,13 +39,16 @@
 struct s3c_adc_client {
 	struct platform_device	*pdev;
 	struct list_head	 pend;
+	wait_queue_head_t	*wait;
 
 	unsigned int		 nr_samples;
+	int			 result;
 	unsigned char		 is_ts;
 	unsigned char		 channel;
 
-	void	(*select_cb)(unsigned selected);
-	void	(*convert_cb)(unsigned val1, unsigned val2,
+	void	(*select_cb)(struct s3c_adc_client *c, unsigned selected);
+	void	(*convert_cb)(struct s3c_adc_client *c,
+			      unsigned val1, unsigned val2,
 			      unsigned *samples_left);
 };
 
@@ -81,7 +84,7 @@ static inline void s3c_adc_select(struct adc_device *adc,
 {
 	unsigned con = readl(adc->regs + S3C2410_ADCCON);
 
-	client->select_cb(1);
+	client->select_cb(client, 1);
 
 	con &= ~S3C2410_ADCCON_MUXMASK;
 	con &= ~S3C2410_ADCCON_STDBM;
@@ -153,25 +156,61 @@ int s3c_adc_start(struct s3c_adc_client *client,
 }
 EXPORT_SYMBOL_GPL(s3c_adc_start);
 
-static void s3c_adc_default_select(unsigned select)
+static void s3c_convert_done(struct s3c_adc_client *client,
+			     unsigned v, unsigned u, unsigned *left)
+{
+	client->result = v;
+	wake_up(client->wait);
+}
+
+int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
+{
+	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+	int ret;
+
+	client->convert_cb = s3c_convert_done;
+	client->wait = &wake;
+	client->result = -1;
+
+	ret = s3c_adc_start(client, ch, 1);
+	if (ret < 0)
+		goto err;
+
+	ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
+	if (client->result < 0) {
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	client->convert_cb = NULL;
+	return client->result;
+
+err:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_convert);
+
+static void s3c_adc_default_select(struct s3c_adc_client *client,
+				   unsigned select)
 {
 }
 
 struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-					void (*select)(unsigned int selected),
-					void (*conv)(unsigned d0, unsigned d1,
+					void (*select)(struct s3c_adc_client *client,
+						       unsigned int selected),
+					void (*conv)(struct s3c_adc_client *client,
+						     unsigned d0, unsigned d1,
 						     unsigned *samples_left),
 					unsigned int is_ts)
 {
 	struct s3c_adc_client *client;
 
 	WARN_ON(!pdev);
-	WARN_ON(!conv);
 
 	if (!select)
 		select = s3c_adc_default_select;
 
-	if (!conv || !pdev)
+	if (!pdev)
 		return ERR_PTR(-EINVAL);
 
 	client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
@@ -230,16 +269,19 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
 
 	client->nr_samples--;
-	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
+
+	if (client->convert_cb)
+		(client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
+				     &client->nr_samples);
 
 	if (client->nr_samples > 0) {
 		/* fire another conversion for this */
 
-		client->select_cb(1);
+		client->select_cb(client, 1);
 		s3c_adc_convert(adc);
 	} else {
 		local_irq_save(flags);
-		(client->select_cb)(0);
+		(client->select_cb)(client, 0);
 		adc->cur = NULL;
 
 		s3c_adc_try(adc);
-- 
GitLab


From bff78650a2b0ed42b8fb134b6a9b387e00027d67 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:28 +0100
Subject: [PATCH 048/257] ARM: HWMON: S3C24XX series ADC driver

Add support for the ADC controller on the S3C series of processors to
drivers/hwmon for use with hardware monitoring systems.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/hwmon.h |  41 +++
 drivers/hwmon/Kconfig                  |  17 ++
 drivers/hwmon/Makefile                 |   1 +
 drivers/hwmon/s3c-hwmon.c              | 405 +++++++++++++++++++++++++
 4 files changed, 464 insertions(+)
 create mode 100644 arch/arm/plat-s3c/include/plat/hwmon.h
 create mode 100644 drivers/hwmon/s3c-hwmon.c

diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-s3c/include/plat/hwmon.h
new file mode 100644
index 00000000000..1ba88ea0aa3
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/hwmon.h
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
+ *
+ * Copyright 2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C - HWMon interface for ADC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ADC_HWMON_H
+#define __ASM_ARCH_ADC_HWMON_H __FILE__
+
+/**
+ * s3c_hwmon_chcfg - channel configuration
+ * @name: The name to give this channel.
+ * @mult: Multiply the ADC value read by this.
+ * @div: Divide the value from the ADC by this.
+ *
+ * The value read from the ADC is converted to a value that
+ * hwmon expects (mV) by result = (value_read * @mult) / @div.
+ */
+struct s3c_hwmon_chcfg {
+	const char	*name;
+	unsigned int	mult;
+	unsigned int	div;
+};
+
+/**
+ * s3c_hwmon_pdata - HWMON platform data
+ * @in: One configuration for each possible channel used.
+ */
+struct s3c_hwmon_pdata {
+	struct s3c_hwmon_chcfg	*in[8];
+};
+
+#endif /* __ASM_ARCH_ADC_HWMON_H */
+
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 2d5016691d4..2e25b7a827d 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -702,6 +702,23 @@ config SENSORS_SHT15
 	  This driver can also be built as a module.  If so, the module
 	  will be called sht15.
 
+config SENSORS_S3C
+	tristate "S3C24XX/S3C64XX Inbuilt ADC"
+	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	help
+	  If you say yes here you get support for the on-board ADCs of
+	  the Samsung S3C24XX or S3C64XX series of SoC
+
+	  This driver can also be built as a module. If so, the module
+	  will be called s3c-hwmo.
+
+config SENSORS_S3C_RAW
+	bool "Include raw channel attributes in sysfs"
+	depends on SENSORS_S3C
+	help
+	  Say Y here if you want to include raw copies of all the ADC
+	  channels in sysfs.
+
 config SENSORS_SIS5595
 	tristate "Silicon Integrated Systems Corp. SiS5595"
 	depends on PCI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index b793dce6bed..7f239a247c3 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_SENSORS_MAX6650)	+= max6650.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
+obj-$(CONFIG_SENSORS_S3C)	+= s3c-hwmon.o
 obj-$(CONFIG_SENSORS_SHT15)	+= sht15.o
 obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
 obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
new file mode 100644
index 00000000000..3a524f2fe49
--- /dev/null
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -0,0 +1,405 @@
+/* linux/drivers/hwmon/s3c-hwmon.c
+ *
+ * Copyright (C) 2005, 2008, 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX/S3C64XX ADC hwmon support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <plat/adc.h>
+#include <plat/hwmon.h>
+
+struct s3c_hwmon_attr {
+	struct sensor_device_attribute	in;
+	struct sensor_device_attribute	label;
+	char				in_name[12];
+	char				label_name[12];
+};
+
+/**
+ * struct s3c_hwmon - ADC hwmon client information
+ * @lock: Access lock to serialise the conversions.
+ * @client: The client we registered with the S3C ADC core.
+ * @hwmon_dev: The hwmon device we created.
+ * @attr: The holders for the channel attributes.
+*/
+struct s3c_hwmon {
+	struct semaphore	lock;
+	struct s3c_adc_client	*client;
+	struct device		*hwmon_dev;
+
+	struct s3c_hwmon_attr	attrs[8];
+};
+
+/**
+ * s3c_hwmon_read_ch - read a value from a given adc channel.
+ * @dev: The device.
+ * @hwmon: Our state.
+ * @channel: The channel we're reading from.
+ *
+ * Read a value from the @channel with the proper locking and sleep until
+ * either the read completes or we timeout awaiting the ADC core to get
+ * back to us.
+ */
+static int s3c_hwmon_read_ch(struct device *dev,
+			     struct s3c_hwmon *hwmon, int channel)
+{
+	int ret;
+
+	ret = down_interruptible(&hwmon->lock);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(dev, "reading channel %d\n", channel);
+
+	ret = s3c_adc_read(hwmon->client, channel);
+	up(&hwmon->lock);
+
+	return ret;
+}
+
+#ifdef CONFIG_SENSORS_S3C_RAW
+/**
+ * s3c_hwmon_show_raw - show a conversion from the raw channel number.
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * This show deals with the raw attribute, registered for each possible
+ * ADC channel. This does a conversion and returns the raw (un-scaled)
+ * value returned from the hardware.
+ */
+static ssize_t s3c_hwmon_show_raw(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct s3c_hwmon *adc = platform_get_drvdata(to_platform_device(dev));
+	struct sensor_device_attribute *sa = to_sensor_dev_attr(attr);
+	int ret;
+
+	ret = s3c_hwmon_read_ch(dev, adc, sa->index);
+
+	return  (ret < 0) ? ret : snprintf(buf, PAGE_SIZE, "%d\n", ret);
+}
+
+#define DEF_ADC_ATTR(x)	\
+	static SENSOR_DEVICE_ATTR(adc##x##_raw, S_IRUGO, s3c_hwmon_show_raw, NULL, x)
+
+DEF_ADC_ATTR(0);
+DEF_ADC_ATTR(1);
+DEF_ADC_ATTR(2);
+DEF_ADC_ATTR(3);
+DEF_ADC_ATTR(4);
+DEF_ADC_ATTR(5);
+DEF_ADC_ATTR(6);
+DEF_ADC_ATTR(7);
+
+static struct attribute *s3c_hwmon_attrs[9] = {
+	&sensor_dev_attr_adc0_raw.dev_attr.attr,
+	&sensor_dev_attr_adc1_raw.dev_attr.attr,
+	&sensor_dev_attr_adc2_raw.dev_attr.attr,
+	&sensor_dev_attr_adc3_raw.dev_attr.attr,
+	&sensor_dev_attr_adc4_raw.dev_attr.attr,
+	&sensor_dev_attr_adc5_raw.dev_attr.attr,
+	&sensor_dev_attr_adc6_raw.dev_attr.attr,
+	&sensor_dev_attr_adc7_raw.dev_attr.attr,
+	NULL,
+};
+
+static struct attribute_group s3c_hwmon_attrgroup = {
+	.attrs	= s3c_hwmon_attrs,
+};
+
+static inline int s3c_hwmon_add_raw(struct device *dev)
+{
+	return sysfs_create_group(&dev->kobj, &s3c_hwmon_attrgroup);
+}
+
+static inline void s3c_hwmon_remove_raw(struct device *dev)
+{
+	sysfs_remove_group(&dev->kobj, &s3c_hwmon_attrgroup);
+}
+
+#else
+
+static inline int s3c_hwmon_add_raw(struct device *dev) { return 0; }
+static inline void s3c_hwmon_remove_raw(struct device *dev) { }
+
+#endif /* CONFIG_SENSORS_S3C_RAW */
+
+/**
+ * s3c_hwmon_ch_show - show value of a given channel
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * Read a value from the ADC and scale it before returning it to the
+ * caller. The scale factor is gained from the channel configuration
+ * passed via the platform data when the device was registered.
+ */
+static ssize_t s3c_hwmon_ch_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr);
+	struct s3c_hwmon *hwmon = platform_get_drvdata(to_platform_device(dev));
+	struct s3c_hwmon_pdata *pdata = dev->platform_data;
+	struct s3c_hwmon_chcfg *cfg;
+	int ret;
+
+	cfg = pdata->in[sen_attr->index];
+
+	ret = s3c_hwmon_read_ch(dev, hwmon, sen_attr->index);
+	if (ret < 0)
+		return ret;
+
+	ret *= cfg->mult;
+	ret = DIV_ROUND_CLOSEST(ret, cfg->div);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ret);
+}
+
+/**
+ * s3c_hwmon_label_show - show label name of the given channel.
+ * @dev: The device that the attribute belongs to.
+ * @attr: The attribute being read.
+ * @buf: The result buffer.
+ *
+ * Return the label name of a given channel
+ */
+static ssize_t s3c_hwmon_label_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct sensor_device_attribute *sen_attr = to_sensor_dev_attr(attr);
+	struct s3c_hwmon_pdata *pdata = dev->platform_data;
+	struct s3c_hwmon_chcfg *cfg;
+
+	cfg = pdata->in[sen_attr->index];
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", cfg->name);
+}
+
+/**
+ * s3c_hwmon_create_attr - create hwmon attribute for given channel.
+ * @dev: The device to create the attribute on.
+ * @cfg: The channel configuration passed from the platform data.
+ * @channel: The ADC channel number to process.
+ *
+ * Create the scaled attribute for use with hwmon from the specified
+ * platform data in @pdata. The sysfs entry is handled by the routine
+ * s3c_hwmon_ch_show().
+ *
+ * The attribute name is taken from the configuration data if present
+ * otherwise the name is taken by concatenating in_ with the channel
+ * number.
+ */
+static int s3c_hwmon_create_attr(struct device *dev,
+				 struct s3c_hwmon_chcfg *cfg,
+				 struct s3c_hwmon_attr *attrs,
+				 int channel)
+{
+	struct sensor_device_attribute *attr;
+	int ret;
+
+	snprintf(attrs->in_name, sizeof(attrs->in_name), "in%d_input", channel);
+
+	attr = &attrs->in;
+	attr->index = channel;
+	attr->dev_attr.attr.name  = attrs->in_name;
+	attr->dev_attr.attr.mode  = S_IRUGO;
+	attr->dev_attr.attr.owner = THIS_MODULE;
+	attr->dev_attr.show = s3c_hwmon_ch_show;
+
+	ret =  device_create_file(dev, &attr->dev_attr);
+	if (ret < 0) {
+		dev_err(dev, "failed to create input attribute\n");
+		return ret;
+	}
+
+	/* if this has a name, add a label */
+	if (cfg->name) {
+		snprintf(attrs->label_name, sizeof(attrs->label_name),
+			 "in%d_label", channel);
+
+		attr = &attrs->label;
+		attr->index = channel;
+		attr->dev_attr.attr.name  = attrs->label_name;
+		attr->dev_attr.attr.mode  = S_IRUGO;
+		attr->dev_attr.attr.owner = THIS_MODULE;
+		attr->dev_attr.show = s3c_hwmon_label_show;
+
+		ret = device_create_file(dev, &attr->dev_attr);
+		if (ret < 0) {
+			device_remove_file(dev, &attrs->in.dev_attr);
+			dev_err(dev, "failed to create label attribute\n");
+		}
+	}
+
+	return ret;
+}
+
+static void s3c_hwmon_remove_attr(struct device *dev,
+				  struct s3c_hwmon_attr *attrs)
+{
+	device_remove_file(dev, &attrs->in.dev_attr);
+	device_remove_file(dev, &attrs->label.dev_attr);
+}
+
+/**
+ * s3c_hwmon_probe - device probe entry.
+ * @dev: The device being probed.
+*/
+static int __devinit s3c_hwmon_probe(struct platform_device *dev)
+{
+	struct s3c_hwmon_pdata *pdata = dev->dev.platform_data;
+	struct s3c_hwmon *hwmon;
+	int ret = 0;
+	int i;
+
+	if (!pdata) {
+		dev_err(&dev->dev, "no platform data supplied\n");
+		return -EINVAL;
+	}
+
+	hwmon = kzalloc(sizeof(struct s3c_hwmon), GFP_KERNEL);
+	if (hwmon == NULL) {
+		dev_err(&dev->dev, "no memory\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(dev, hwmon);
+
+	init_MUTEX(&hwmon->lock);
+
+	/* Register with the core ADC driver. */
+
+	hwmon->client = s3c_adc_register(dev, NULL, NULL, 0);
+	if (IS_ERR(hwmon->client)) {
+		dev_err(&dev->dev, "cannot register adc\n");
+		ret = PTR_ERR(hwmon->client);
+		goto err_mem;
+	}
+
+	/* add attributes for our adc devices. */
+
+	ret = s3c_hwmon_add_raw(&dev->dev);
+	if (ret)
+		goto err_registered;
+
+	/* register with the hwmon core */
+
+	hwmon->hwmon_dev = hwmon_device_register(&dev->dev);
+	if (IS_ERR(hwmon->hwmon_dev)) {
+		dev_err(&dev->dev, "error registering with hwmon\n");
+		ret = PTR_ERR(hwmon->hwmon_dev);
+		goto err_raw_attribute;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(pdata->in); i++) {
+		if (!pdata->in[i])
+			continue;
+
+		if (pdata->in[i]->mult >= 0x10000)
+			dev_warn(&dev->dev,
+				 "channel %d multiplier too large\n",
+				 i);
+
+		ret = s3c_hwmon_create_attr(&dev->dev, pdata->in[i],
+					    &hwmon->attrs[i], i);
+		if (ret) {
+			dev_err(&dev->dev,
+					"error creating channel %d\n", i);
+
+			for (i--; i >= 0; i--)
+				s3c_hwmon_remove_attr(&dev->dev,
+							      &hwmon->attrs[i]);
+
+			goto err_hwmon_register;
+		}
+	}
+
+	return 0;
+
+ err_hwmon_register:
+	hwmon_device_unregister(hwmon->hwmon_dev);
+
+ err_raw_attribute:
+	s3c_hwmon_remove_raw(&dev->dev);
+
+ err_registered:
+	s3c_adc_release(hwmon->client);
+
+ err_mem:
+	kfree(hwmon);
+	return ret;
+}
+
+static int __devexit s3c_hwmon_remove(struct platform_device *dev)
+{
+	struct s3c_hwmon *hwmon = platform_get_drvdata(dev);
+	int i;
+
+	s3c_hwmon_remove_raw(&dev->dev);
+
+	for (i = 0; i < ARRAY_SIZE(hwmon->attrs); i++)
+		s3c_hwmon_remove_attr(&dev->dev, &hwmon->attrs[i]);
+
+	hwmon_device_unregister(hwmon->hwmon_dev);
+	s3c_adc_release(hwmon->client);
+
+	return 0;
+}
+
+static struct platform_driver s3c_hwmon_driver = {
+	.driver	= {
+		.name		= "s3c-hwmon",
+		.owner		= THIS_MODULE,
+	},
+	.probe		= s3c_hwmon_probe,
+	.remove		= __devexit_p(s3c_hwmon_remove),
+};
+
+static int __init s3c_hwmon_init(void)
+{
+	return platform_driver_register(&s3c_hwmon_driver);
+}
+
+static void __exit s3c_hwmon_exit(void)
+{
+	platform_driver_unregister(&s3c_hwmon_driver);
+}
+
+module_init(s3c_hwmon_init);
+module_exit(s3c_hwmon_exit);
+
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C ADC HWMon driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:s3c-hwmon");
-- 
GitLab


From 3aa7a9a3cf8774f6701b1903a6353f9545f561ce Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 20 Jul 2009 18:22:36 +0100
Subject: [PATCH 049/257] [ARM] 5612/1: ep93xx: add platform LEDs

The EP93xx has two gpio pins specifically assigned to drive
external LEDs.  Add core support for these LEDs.

On the EDB93xx development boards, the rdled is connected to
an external reset circuit.  Turning this led on for an extended
amount of time will cause the circuit to issue a manual reset.

Refer to Cirrus App Note AN258 for more information.

	http://www.cirrus.com/en/pubs/appNote/AN258REV2.pdf

This led can be safely used as the system heartbeat with the
ledtrig-heartbeat driver.

	echo heartbeat > /sys/class/leds/platform:rdled/trigger

The grled can be used for any desired purpose.

Tested-by: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b390c35f8bc..2b58df0184c 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -22,6 +22,7 @@
 #include <linux/timex.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
@@ -568,6 +569,34 @@ void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
 	platform_device_register(&ep93xx_i2c_device);
 }
 
+
+/*************************************************************************
+ * EP93xx LEDs
+ *************************************************************************/
+static struct gpio_led ep93xx_led_pins[] = {
+	{
+		.name			= "platform:grled",
+		.gpio			= EP93XX_GPIO_LINE_GRLED,
+	}, {
+		.name			= "platform:rdled",
+		.gpio			= EP93XX_GPIO_LINE_RDLED,
+	},
+};
+
+static struct gpio_led_platform_data ep93xx_led_data = {
+	.num_leds	= ARRAY_SIZE(ep93xx_led_pins),
+	.leds		= ep93xx_led_pins,
+};
+
+static struct platform_device ep93xx_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ep93xx_led_data,
+	},
+};
+
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
@@ -583,4 +612,5 @@ void __init ep93xx_init_devices(void)
 
 	platform_device_register(&ep93xx_rtc_device);
 	platform_device_register(&ep93xx_ohci_device);
+	platform_device_register(&ep93xx_leds);
 }
-- 
GitLab


From 4bf1fa5a34aa2dd0d2cc58f0fc213a2e22d007a4 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Tue, 21 Jul 2009 09:56:27 +0100
Subject: [PATCH 050/257] [ARM] 5613/1: implement CALLER_ADDRESSx
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

As __builtin_return_address(n) doesn't work for ARM with n > 0, the
kernel needs its own implementation.

This fixes many warnings saying:

	warning: unsupported argument to '__builtin_return_address'

The new methods and walk_stackframe must not be instrumented because
CALLER_ADDRESSx is used in the various tracers and tracing the tracer is
a bad idea.

What's currently missing is an implementation using unwind tables.  This
is not fatal though, it's just that the tracers don't get enough
information to be really useful.

Note that if both ARM_UNWIND and FRAME_POINTER are enabled,
walk_stackframe uses unwind information.  So in this case the same
implementation is used as when FRAME_POINTER is disabled.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/ftrace.h    | 34 +++++++++++++++
 arch/arm/kernel/Makefile         |  4 +-
 arch/arm/kernel/return_address.c | 71 ++++++++++++++++++++++++++++++++
 arch/arm/kernel/stacktrace.c     |  4 +-
 4 files changed, 110 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/kernel/return_address.c

diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 39c8bc1a006..d74265cffd8 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -11,4 +11,38 @@ extern void mcount(void);
 
 #endif
 
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+/*
+ * return_address uses walk_stackframe to do it's work.  If both
+ * CONFIG_FRAME_POINTER=y and CONFIG_ARM_UNWIND=y walk_stackframe uses unwind
+ * information.  For this to work in the function tracer many functions would
+ * have to be marked with __notrace.  So for now just depend on
+ * !CONFIG_ARM_UNWIND.
+ */
+
+void *return_address(unsigned int);
+
+#else
+
+extern inline void *return_address(unsigned int level)
+{
+	return NULL;
+}
+
+#endif
+
+#define HAVE_ARCH_CALLER_ADDR
+
+#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#define CALLER_ADDR1 ((unsigned long)return_address(1))
+#define CALLER_ADDR2 ((unsigned long)return_address(2))
+#define CALLER_ADDR3 ((unsigned long)return_address(3))
+#define CALLER_ADDR4 ((unsigned long)return_address(4))
+#define CALLER_ADDR5 ((unsigned long)return_address(5))
+#define CALLER_ADDR6 ((unsigned long)return_address(6))
+
+#endif /* ifndef __ASSEMBLY__ */
+
 #endif /* _ASM_ARM_FTRACE */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index ff89d0b3abc..3213c9382b1 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -8,10 +8,12 @@ ifdef CONFIG_DYNAMIC_FTRACE
 CFLAGS_REMOVE_ftrace.o = -pg
 endif
 
+CFLAGS_REMOVE_return_address.o = -pg
+
 # Object file lists.
 
 obj-y		:= compat.o elf.o entry-armv.o entry-common.o irq.o \
-		   process.o ptrace.o setup.o signal.o \
+		   process.o ptrace.o return_address.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
new file mode 100644
index 00000000000..df246da4cec
--- /dev/null
+++ b/arch/arm/kernel/return_address.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/kernel/return_address.c
+ *
+ * Copyright (C) 2009 Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ * for Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/module.h>
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+#include <linux/sched.h>
+
+#include <asm/stacktrace.h>
+
+struct return_address_data {
+	unsigned int level;
+	void *addr;
+};
+
+static int save_return_addr(struct stackframe *frame, void *d)
+{
+	struct return_address_data *data = d;
+
+	if (!data->level) {
+		data->addr = (void *)frame->lr;
+
+		return 1;
+	} else {
+		--data->level;
+		return 0;
+	}
+}
+
+void *return_address(unsigned int level)
+{
+	struct return_address_data data;
+	struct stackframe frame;
+	register unsigned long current_sp asm ("sp");
+
+	data.level = level + 1;
+
+	frame.fp = (unsigned long)__builtin_frame_address(0);
+	frame.sp = current_sp;
+	frame.lr = (unsigned long)__builtin_return_address(0);
+	frame.pc = (unsigned long)return_address;
+
+	walk_stackframe(&frame, save_return_addr, &data);
+
+	if (!data.level)
+		return data.addr;
+	else
+		return NULL;
+}
+
+#else /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */
+
+#if defined(CONFIG_ARM_UNWIND)
+#warning "TODO: return_address should use unwind tables"
+#endif
+
+void *return_address(unsigned int level)
+{
+	return NULL;
+}
+
+#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
+
+EXPORT_SYMBOL_GPL(return_address);
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 9f444e5cc16..20b7411e47f 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -21,7 +21,7 @@
  * Note that with framepointer enabled, even the leaf functions have the same
  * prologue and epilogue, therefore we can ignore the LR value in this case.
  */
-int unwind_frame(struct stackframe *frame)
+int notrace unwind_frame(struct stackframe *frame)
 {
 	unsigned long high, low;
 	unsigned long fp = frame->fp;
@@ -43,7 +43,7 @@ int unwind_frame(struct stackframe *frame)
 }
 #endif
 
-void walk_stackframe(struct stackframe *frame,
+void notrace walk_stackframe(struct stackframe *frame,
 		     int (*fn)(struct stackframe *, void *), void *data)
 {
 	while (1) {
-- 
GitLab


From 42ff4cf957b695250534e540375e23507c722327 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 17 Jul 2009 14:42:33 +0100
Subject: [PATCH 051/257] [ARM] 5610/1: Add fmi resource define for w90p910
 platform

Add fmi resource define for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 7a62bd348e8..3b9fa312d9f 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -228,6 +228,28 @@ struct platform_device w90x900_device_usbgadget = {
 };
 EXPORT_SYMBOL(w90x900_device_usbgadget);
 
+/* FMI Device */
+
+static struct resource w90p910_fmi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_FMI,
+		.end   = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_FMI,
+		.end   = IRQ_FMI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device w90p910_device_fmi = {
+	.name		= "w90p910-fmi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90p910_fmi_resource),
+	.resource	= w90p910_fmi_resource,
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -242,6 +264,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90x900_device_rtc,
 	&w90x900_device_kpi,
 	&w90x900_device_usbgadget,
+	&w90p910_device_fmi,
 };
 
 static void __init w90p910evb_map_io(void)
-- 
GitLab


From 768db4e04b4c969cf3a9e81a79a10af6468ca56d Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:47:57 +0100
Subject: [PATCH 052/257] [ARM] 5616/1: Add mac resource define for w90p910 mac
 driver

Add mac resource define for w90p910 mac driver.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 33 +++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 3b9fa312d9f..2e56d84c632 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -250,6 +250,38 @@ static struct platform_device w90p910_device_fmi = {
 	.resource	= w90p910_fmi_resource,
 };
 
+/* MAC device */
+
+static struct resource w90x900_emc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_EMC,
+		.end   = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_EMCTX,
+		.end   = IRQ_EMCTX,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_EMCRX,
+		.end   = IRQ_EMCRX,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 w90x900_device_emc_dmamask = 0xffffffffUL;
+static struct platform_device w90p910_device_emc = {
+	.name		= "w90p910-emc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_emc_resource),
+	.resource	= w90x900_emc_resource,
+	.dev              = {
+		.dma_mask = &w90x900_device_emc_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -265,6 +297,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90x900_device_kpi,
 	&w90x900_device_usbgadget,
 	&w90p910_device_fmi,
+	&w90p910_device_emc,
 };
 
 static void __init w90p910evb_map_io(void)
-- 
GitLab


From b48147663b2582bfb91a2bf39f9d1ffe8f209122 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:50:20 +0100
Subject: [PATCH 053/257] [ARM] 5617/1: rename this spi device as w90p910-spi

When programming clock api, I named this spi device
as w90p910-usi, now, I think named it as w90p910-spi better

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/w90p910.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 1bde69eac3d..6ebf5cfc78d 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -93,7 +93,7 @@ static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
 	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
 	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
-	DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL),
+	DEF_CLKLOOK(&clk_usi, "w90p910-spi", NULL),
 };
 
 /* Initial serial platform data */
-- 
GitLab


From c16d5d5657294e782d505efd00bbf2452d6aa0ca Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:51:46 +0100
Subject: [PATCH 054/257] [ARM] 5618/1: Add spi resource define for w90p910 spi
 driver

Add spi resource define for w90p910 spi driver.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 61 +++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 2e56d84c632..3e3a267b2dd 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -20,7 +20,13 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -35,6 +41,8 @@
 
 #define W90P910_FLASH_BASE	0xA0000000
 #define W90P910_FLASH_SIZE	0x400000
+#define SPIOFFSET		0x200
+#define SPIOREG_SIZE		0x100
 
 static struct mtd_partition w90p910_flash_partitions[] = {
 	{
@@ -282,6 +290,56 @@ static struct platform_device w90p910_device_emc = {
 	}
 };
 
+/* SPI device */
+
+static struct resource w90p910_spi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_I2C + SPIOFFSET,
+		.end   = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_SSP,
+		.end   = IRQ_SSP,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device w90p910_device_spi = {
+	.name		= "w90p910-spi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90p910_spi_resource),
+	.resource	= w90p910_spi_resource,
+};
+
+/* spi device, spi flash info */
+
+static struct mtd_partition w90p910_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x0100000,
+		.offset = 0,
+	},
+};
+
+static struct flash_platform_data w90p910_spi_flash_data = {
+	.name = "m25p80",
+	.parts =  w90p910_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(w90p910_spi_flash_partitions),
+	.type = "w25x16",
+};
+
+static struct spi_board_info w90p910_spi_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &w90p910_spi_flash_data,
+		.mode = SPI_MODE_0,
+	},
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -298,6 +356,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90x900_device_usbgadget,
 	&w90p910_device_fmi,
 	&w90p910_device_emc,
+	&w90p910_device_spi,
 };
 
 static void __init w90p910evb_map_io(void)
@@ -309,6 +368,8 @@ static void __init w90p910evb_map_io(void)
 static void __init w90p910evb_init(void)
 {
 	platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
+	spi_register_board_info(w90p910_spi_board_info,
+					ARRAY_SIZE(w90p910_spi_board_info));
 }
 
 MACHINE_START(W90P910EVB, "W90P910EVB")
-- 
GitLab


From 3f3f1d9d8de10a5dad0d22046cdd26dfb93d05c9 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:52:51 +0100
Subject: [PATCH 055/257] [ARM] 5619/1: Add spi mfp api for w90p910 spi driver

Add spi mfp api for w90p910 spi driver.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mfp-w90p910.c | 38 +++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
index 8aec34b044c..e11a32b6856 100644
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -34,6 +34,12 @@
 #define GPSELEI0	(0x01 << 26)
 #define GPSELEI1	(0x01 << 27)
 
+#define GPIOG0TO1	(0x03 << 14)
+#define GPIOG2TO3	(0x03 << 16)
+#define ENSPI		(0x0a << 14)
+#define ENI2C0		(0x01 << 14)
+#define ENI2C1		(0x01 << 16)
+
 static DECLARE_MUTEX(mfp_sem);
 
 void mfp_set_groupf(struct device *dev)
@@ -118,3 +124,35 @@ void mfp_set_groupi(struct device *dev)
 }
 EXPORT_SYMBOL(mfp_set_groupi);
 
+void mfp_set_groupg(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-spi") == 0) {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
+		mfpen |= ENSPI;/*enable spi*/
+	} else if (strcmp(dev_id, "w90p910-i2c0") == 0) {
+		mfpen &= ~(GPIOG0TO1);
+		mfpen |= ENI2C0;/*enable i2c0*/
+	} else if (strcmp(dev_id, "w90p910-i2c1") == 0) {
+		mfpen &= ~(GPIOG2TO3);
+		mfpen |= ENI2C1;/*enable i2c1*/
+	} else {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
+	}
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupg);
+
-- 
GitLab


From 915190f7d4f08e413e5fde6b0abcd5375aeacdf4 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Tue, 21 Jul 2009 11:31:29 +0100
Subject: [PATCH 056/257] [ARM] 5614/1: at91: atmel_lcdfb: add at91sam9g10
 support to atmel LCD driver

Modify atmel LCD driver: atmel_lcdfb for at91sam9g10.  This add a clock
management equivalent to at91sam9261.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/video/Kconfig           | 4 ++--
 drivers/video/atmel_lcdfb.c     | 6 ++++--
 drivers/video/backlight/Kconfig | 2 +-
 3 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 36281823fe5..f632c6682aa 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -933,7 +933,7 @@ config FB_S1D13XXX
 
 config FB_ATMEL
 	tristate "AT91/AT32 LCD Controller support"
-	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
+	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -949,7 +949,7 @@ config FB_INTSRAM
 
 config FB_ATMEL_STN
 	bool "Use a STN display with AT91/AT32 LCD Controller"
-	depends on FB_ATMEL && MACH_AT91SAM9261EK
+	depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
 	default n
 	help
 	  Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 5afd64482f5..adc5bf01254 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -182,7 +182,8 @@ static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
 {
 	unsigned long value;
 
-	if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
+	if (!(cpu_is_at91sam9261() || cpu_is_at91sam9g10()
+		|| cpu_is_at32ap7000()))
 		return xres;
 
 	value = xres;
@@ -821,7 +822,8 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 	info->fix = atmel_lcdfb_fix;
 
 	/* Enable LCDC Clocks */
-	if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
+	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()
+	 || cpu_is_at32ap7000()) {
 		sinfo->bus_clk = clk_get(dev, "hck1");
 		if (IS_ERR(sinfo->bus_clk)) {
 			ret = PTR_ERR(sinfo->bus_clk);
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index f9d19be0554..90861cd9316 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -110,7 +110,7 @@ config BACKLIGHT_CLASS_DEVICE
 config BACKLIGHT_ATMEL_LCDC
 	bool "Atmel LCDC Contrast-as-Backlight control"
 	depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
-	default y if MACH_SAM9261EK || MACH_SAM9263EK
+	default y if MACH_SAM9261EK || MACH_SAM9G10EK || MACH_SAM9263EK
 	help
 	  This provides a backlight control internal to the Atmel LCDC
 	  driver.  If the LCD "contrast control" on your board is wired
-- 
GitLab


From 4fef5f90edc80aae92efec049750de93be9e25cb Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Wed, 1 Jul 2009 20:20:23 +0530
Subject: [PATCH 057/257] OMAP4: sDMA: Update the request lines and new
 registers.

This patch updates the platform dma.h with new dma request lines
for OMAP4 peripherals. Also additional hardware register of OMAP4
sDMA module are included.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/mach/dma.h | 88 +++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 7b939cc0196..72f680b7180 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -122,6 +122,11 @@
 #define OMAP_DMA4_CCFN(n)		(0x60 * (n) + 0xc0)
 #define OMAP_DMA4_COLOR(n)		(0x60 * (n) + 0xc4)
 
+/* Additional registers available on OMAP4 */
+#define OMAP_DMA4_CDP(n)		(0x60 * (n) + 0xd0)
+#define OMAP_DMA4_CNDP(n)		(0x60 * (n) + 0xd4)
+#define OMAP_DMA4_CCDN(n)		(0x60 * (n) + 0xd8)
+
 /* Dummy defines to keep multi-omap compiles happy */
 #define OMAP1_DMA_REVISION		0
 #define OMAP1_DMA_IRQSTATUS_L0		0
@@ -311,6 +316,89 @@
 #define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
 #define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
 
+/* DMA request lines for 44xx */
+#define OMAP44XX_DMA_DSS_DISPC_REQ	6	/* S_DMA_5 */
+#define OMAP44XX_DMA_SYS_REQ2		7	/* S_DMA_6 */
+#define OMAP44XX_DMA_ISS_REQ1		9	/* S_DMA_8 */
+#define OMAP44XX_DMA_ISS_REQ2		10	/* S_DMA_9 */
+#define OMAP44XX_DMA_ISS_REQ3		12	/* S_DMA_11 */
+#define OMAP44XX_DMA_ISS_REQ4		13	/* S_DMA_12 */
+#define OMAP44XX_DMA_DSS_RFBI_REQ	14	/* S_DMA_13 */
+#define OMAP44XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
+#define OMAP44XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
+#define OMAP44XX_DMA_MCBSP2_TX		17	/* S_DMA_16 */
+#define OMAP44XX_DMA_MCBSP2_RX		18	/* S_DMA_17 */
+#define OMAP44XX_DMA_MCBSP3_TX		19	/* S_DMA_18 */
+#define OMAP44XX_DMA_MCBSP3_RX		20	/* S_DMA_19 */
+#define OMAP44XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
+#define OMAP44XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
+#define OMAP44XX_DMA_I2C3_TX		25	/* S_DMA_24 */
+#define OMAP44XX_DMA_I2C3_RX		26	/* S_DMA_25 */
+#define OMAP44XX_DMA_I2C1_TX		27	/* S_DMA_26 */
+#define OMAP44XX_DMA_I2C1_RX		28	/* S_DMA_27 */
+#define OMAP44XX_DMA_I2C2_TX		29	/* S_DMA_28 */
+#define OMAP44XX_DMA_I2C2_RX		30	/* S_DMA_29 */
+#define OMAP44XX_DMA_MCBSP4_TX		31	/* S_DMA_30 */
+#define OMAP44XX_DMA_MCBSP4_RX		32	/* S_DMA_31 */
+#define OMAP44XX_DMA_MCBSP1_TX		33	/* S_DMA_32 */
+#define OMAP44XX_DMA_MCBSP1_RX		34	/* S_DMA_33 */
+#define OMAP44XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
+#define OMAP44XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
+#define OMAP44XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
+#define OMAP44XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
+#define OMAP44XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
+#define OMAP44XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
+#define OMAP44XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
+#define OMAP44XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
+#define OMAP44XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
+#define OMAP44XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
+#define OMAP44XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
+#define OMAP44XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
+#define OMAP44XX_DMA_MMC2_TX		47	/* S_DMA_46 */
+#define OMAP44XX_DMA_MMC2_RX		48	/* S_DMA_47 */
+#define OMAP44XX_DMA_UART1_TX		49	/* S_DMA_48 */
+#define OMAP44XX_DMA_UART1_RX		50	/* S_DMA_49 */
+#define OMAP44XX_DMA_UART2_TX		51	/* S_DMA_50 */
+#define OMAP44XX_DMA_UART2_RX		52	/* S_DMA_51 */
+#define OMAP44XX_DMA_UART3_TX		53	/* S_DMA_52 */
+#define OMAP44XX_DMA_UART3_RX		54	/* S_DMA_53 */
+#define OMAP44XX_DMA_UART4_TX		55	/* S_DMA_54 */
+#define OMAP44XX_DMA_UART4_RX		56	/* S_DMA_55 */
+#define OMAP44XX_DMA_MMC4_TX		57	/* S_DMA_56 */
+#define OMAP44XX_DMA_MMC4_RX		58	/* S_DMA_57 */
+#define OMAP44XX_DMA_MMC5_TX		59	/* S_DMA_58 */
+#define OMAP44XX_DMA_MMC5_RX		60	/* S_DMA_59 */
+#define OMAP44XX_DMA_MMC1_TX		61	/* S_DMA_60 */
+#define OMAP44XX_DMA_MMC1_RX		62	/* S_DMA_61 */
+#define OMAP44XX_DMA_SYS_REQ3		64	/* S_DMA_63 */
+#define OMAP44XX_DMA_MCPDM_UP		65	/* S_DMA_64 */
+#define OMAP44XX_DMA_MCPDM_DL		66	/* S_DMA_65 */
+#define OMAP44XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
+#define OMAP44XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ0	72	/* S_DMA_71 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ1	73	/* S_DMA_72 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ2	74	/* S_DMA_73 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ3	75	/* S_DMA_74 */
+#define OMAP44XX_DMA_DSS_HDMI_REQ	76	/* S_DMA_75 */
+#define OMAP44XX_DMA_MMC3_TX		77	/* S_DMA_76 */
+#define OMAP44XX_DMA_MMC3_RX		78	/* S_DMA_77 */
+#define OMAP44XX_DMA_USIM_TX		79	/* S_DMA_78 */
+#define OMAP44XX_DMA_USIM_RX		80	/* S_DMA_79 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ0	81	/* S_DMA_80 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ1	82	/* S_DMA_81 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ2	83	/* S_DMA_82 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ3	84	/* S_DMA_83 */
+#define OMAP44XX_DMA_ABE_REQ0		101	/* S_DMA_100 */
+#define OMAP44XX_DMA_ABE_REQ1		102	/* S_DMA_101 */
+#define OMAP44XX_DMA_ABE_REQ2		103	/* S_DMA_102 */
+#define OMAP44XX_DMA_ABE_REQ3		104	/* S_DMA_103 */
+#define OMAP44XX_DMA_ABE_REQ4		105	/* S_DMA_104 */
+#define OMAP44XX_DMA_ABE_REQ5		106	/* S_DMA_105 */
+#define OMAP44XX_DMA_ABE_REQ6		107	/* S_DMA_106 */
+#define OMAP44XX_DMA_ABE_REQ7		108	/* S_DMA_107 */
+#define OMAP44XX_DMA_I2C4_TX		124	/* S_DMA_123 */
+#define OMAP44XX_DMA_I2C4_RX		125	/* S_DMA_124 */
+
 /*----------------------------------------------------------------------------*/
 
 /* Hardware registers for LCD DMA */
-- 
GitLab


From 88987ef91b99cf99bc5d167caeb31d4958fbf931 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:52 +0100
Subject: [PATCH 058/257] Thumb-2: Add some .align statements to the .S files

Since the Thumb-2 instructions can be 16-bit wide, data in the .text
sections may not be aligned to a 32-bit word and this leads to unaligned
exceptions. This patch does not affect the ARM code generation.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/compressed/head.S | 3 +++
 arch/arm/kernel/entry-armv.S    | 4 ++++
 arch/arm/kernel/head-common.S   | 2 ++
 arch/arm/lib/sha1.S             | 2 ++
 arch/arm/vfp/entry.S            | 2 ++
 5 files changed, 13 insertions(+)

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 4515728c534..82f5fcfd956 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -291,6 +291,7 @@ wont_overwrite:	mov	r0, r4
 		bl	decompress_kernel
 		b	call_kernel
 
+		.align	2
 		.type	LC0, #object
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
@@ -589,6 +590,7 @@ call_cache_fn:	adr	r12, proc_types
  * methods.  Writeback caches _must_ have the flush method
  * defined.
  */
+		.align	2
 		.type	proc_types,#object
 proc_types:
 		.word	0x41560600		@ ARM6/610
@@ -945,6 +947,7 @@ __armv3_mpu_cache_flush:
  * memory, which again must be relocatable.
  */
 #ifdef DEBUG
+		.align	2
 		.type	phexbuf,#object
 phexbuf:	.space	12
 		.size	phexbuf, . - phexbuf
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index fc8af43c500..0befd1cabf4 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -1065,6 +1065,10 @@ vector_\name:
 	ldr	lr, [pc, lr, lsl #2]
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
+
+	.align	2
+	@ handler addresses follow this label
+1:
 	.endm
 
 	.globl	__stubs_start
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 991952c644d..dbfaef07a1f 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -14,6 +14,7 @@
 #define ATAG_CORE 0x54410001
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
 
+	.align	2
 	.type	__switch_data, %object
 __switch_data:
 	.long	__mmap_switched
@@ -185,6 +186,7 @@ ENDPROC(lookup_processor_type)
  * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
  * more information about the __proc_info and __arch_info structures.
  */
+	.align	2
 	.long	__proc_info_begin
 	.long	__proc_info_end
 3:	.long	.
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index a16fb208c84..09b548cac1a 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -187,6 +187,7 @@ ENTRY(sha_transform)
 
 ENDPROC(sha_transform)
 
+	.align	2
 .L_sha_K:
 	.word	0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
 
@@ -195,6 +196,7 @@ ENDPROC(sha_transform)
  * void sha_init(__u32 *buf)
  */
 
+	.align	2
 .L_sha_initial_digest:
 	.word	0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
 
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index a2bed62aec2..4fa9903b83c 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -42,6 +42,7 @@ ENTRY(vfp_null_entry)
 	mov	pc, lr
 ENDPROC(vfp_null_entry)
 
+	.align	2
 .LCvfp:
 	.word	vfp_vector
 
@@ -61,6 +62,7 @@ ENTRY(vfp_testing_entry)
 	mov	pc, r9			@ we have handled the fault
 ENDPROC(vfp_testing_entry)
 
+	.align	2
 VFP_arch_address:
 	.word	VFP_arch
 
-- 
GitLab


From 0becb088501886f37ade38762c8eaaf4263572cc Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:53 +0100
Subject: [PATCH 059/257] Thumb-2: Add macros for the unified assembler syntax

This patch adds various C and assembler macros that help with using
the unified assembler syntax for compiling files to either ARM or
Thumb-2 modes.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/Kconfig               |   3 +
 arch/arm/Makefile              |   2 +-
 arch/arm/include/asm/unified.h | 126 +++++++++++++++++++++++++++++++++
 3 files changed, 130 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/include/asm/unified.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..da28e7ba608 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -983,6 +983,9 @@ config HZ
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100
 
+config ARM_ASM_UNIFIED
+	bool
+
 config AEABI
 	bool "Use the ARM EABI to compile the kernel"
 	help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..3505572a21e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -95,7 +95,7 @@ endif
 
 # Need -Uarm for gcc < 3.x
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
new file mode 100644
index 00000000000..073e85b9b96
--- /dev/null
+++ b/arch/arm/include/asm/unified.h
@@ -0,0 +1,126 @@
+/*
+ * include/asm-arm/unified.h - Unified Assembler Syntax helper macros
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_UNIFIED_H
+#define __ASM_UNIFIED_H
+
+#if defined(__ASSEMBLY__) && defined(CONFIG_ARM_ASM_UNIFIED)
+	.syntax unified
+#endif
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+#if __GNUC__ < 4
+#error Thumb-2 kernel requires gcc >= 4
+#endif
+
+/* The CPSR bit describing the instruction set (Thumb) */
+#define PSR_ISETSTATE	PSR_T_BIT
+
+#define ARM(x...)
+#define THUMB(x...)	x
+#define W(instr)	instr.w
+#define BSYM(sym)	sym + 1
+
+#else	/* !CONFIG_THUMB2_KERNEL */
+
+/* The CPSR bit describing the instruction set (ARM) */
+#define PSR_ISETSTATE	0
+
+#define ARM(x...)	x
+#define THUMB(x...)
+#define W(instr)	instr
+#define BSYM(sym)	sym
+
+#endif	/* CONFIG_THUMB2_KERNEL */
+
+#ifndef CONFIG_ARM_ASM_UNIFIED
+
+/*
+ * If the unified assembly syntax isn't used (in ARM mode), these
+ * macros expand to an empty string
+ */
+#ifdef __ASSEMBLY__
+	.macro	it, cond
+	.endm
+	.macro	itt, cond
+	.endm
+	.macro	ite, cond
+	.endm
+	.macro	ittt, cond
+	.endm
+	.macro	itte, cond
+	.endm
+	.macro	itet, cond
+	.endm
+	.macro	itee, cond
+	.endm
+	.macro	itttt, cond
+	.endm
+	.macro	ittte, cond
+	.endm
+	.macro	ittet, cond
+	.endm
+	.macro	ittee, cond
+	.endm
+	.macro	itett, cond
+	.endm
+	.macro	itete, cond
+	.endm
+	.macro	iteet, cond
+	.endm
+	.macro	iteee, cond
+	.endm
+#else	/* !__ASSEMBLY__ */
+__asm__(
+"	.macro	it, cond\n"
+"	.endm\n"
+"	.macro	itt, cond\n"
+"	.endm\n"
+"	.macro	ite, cond\n"
+"	.endm\n"
+"	.macro	ittt, cond\n"
+"	.endm\n"
+"	.macro	itte, cond\n"
+"	.endm\n"
+"	.macro	itet, cond\n"
+"	.endm\n"
+"	.macro	itee, cond\n"
+"	.endm\n"
+"	.macro	itttt, cond\n"
+"	.endm\n"
+"	.macro	ittte, cond\n"
+"	.endm\n"
+"	.macro	ittet, cond\n"
+"	.endm\n"
+"	.macro	ittee, cond\n"
+"	.endm\n"
+"	.macro	itett, cond\n"
+"	.endm\n"
+"	.macro	itete, cond\n"
+"	.endm\n"
+"	.macro	iteet, cond\n"
+"	.endm\n"
+"	.macro	iteee, cond\n"
+"	.endm\n");
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* CONFIG_ARM_ASM_UNIFIED */
+
+#endif	/* !__ASM_UNIFIED_H */
-- 
GitLab


From b86040a59feb255a8193173caa4d5199464433d5 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:54 +0100
Subject: [PATCH 060/257] Thumb-2: Implementation of the unified start-up and
 exceptions code

This patch implements the ARM/Thumb-2 unified kernel start-up and
exception handling code.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/assembler.h |  11 +++
 arch/arm/include/asm/futex.h     |   1 +
 arch/arm/kernel/entry-armv.S     | 165 ++++++++++++++++++-------------
 arch/arm/kernel/entry-common.S   |  28 ++----
 arch/arm/kernel/entry-header.S   |  92 ++++++++++++++++-
 arch/arm/kernel/head-common.S    |  13 ++-
 arch/arm/kernel/head-nommu.S     |  11 ++-
 arch/arm/kernel/head.S           |  28 +++---
 arch/arm/kernel/process.c        |   2 +-
 arch/arm/kernel/setup.c          |  28 ++++--
 arch/arm/kernel/unwind.c         |   4 +
 11 files changed, 263 insertions(+), 120 deletions(-)

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 15f8a092b70..1acd1da36d0 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -127,3 +127,14 @@
 #endif
 #endif
 	.endm
+
+#ifdef CONFIG_THUMB2_KERNEL
+	.macro	setmode, mode, reg
+	mov	\reg, #\mode
+	msr	cpsr_c, \reg
+	.endm
+#else
+	.macro	setmode, mode, reg
+	msr	cpsr_c, #\mode
+	.endm
+#endif
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 9ee743b95de..bfcc15929a7 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -99,6 +99,7 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
 	"1:	ldrt	%0, [%3]\n"
 	"	teq	%0, %1\n"
+	"	it	eq	@ explicit IT needed for the 2b label\n"
 	"2:	streqt	%2, [%3]\n"
 	"3:\n"
 	"	.section __ex_table,\"a\"\n"
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 0befd1cabf4..468425f937d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -34,7 +34,7 @@
 	@
 	@ routine called with r0 = irq number, r1 = struct pt_regs *
 	@
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	asm_do_IRQ
 
 #ifdef CONFIG_SMP
@@ -46,13 +46,13 @@
 	 */
 	test_for_ipi r0, r6, r5, lr
 	movne	r0, sp
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	do_IPI
 
 #ifdef CONFIG_LOCAL_TIMERS
 	test_for_ltirq r0, r6, r5, lr
 	movne	r0, sp
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	do_local_timer
 #endif
 #endif
@@ -70,7 +70,10 @@
  */
 	.macro	inv_entry, reason
 	sub	sp, sp, #S_FRAME_SIZE
-	stmib	sp, {r1 - lr}
+ ARM(	stmib	sp, {r1 - lr}		)
+ THUMB(	stmia	sp, {r0 - r12}		)
+ THUMB(	str	sp, [sp, #S_SP]		)
+ THUMB(	str	lr, [sp, #S_LR]		)
 	mov	r1, #\reason
 	.endm
 
@@ -126,17 +129,24 @@ ENDPROC(__und_invalid)
 	.macro	svc_entry, stack_hole=0
  UNWIND(.fnstart		)
  UNWIND(.save {r0 - pc}		)
-	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole)
+	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+#ifdef CONFIG_THUMB2_KERNEL
+ SPFIX(	str	r0, [sp]	)	@ temporarily saved
+ SPFIX(	mov	r0, sp		)
+ SPFIX(	tst	r0, #4		)	@ test original stack alignment
+ SPFIX(	ldr	r0, [sp]	)	@ restored
+#else
  SPFIX(	tst	sp, #4		)
- SPFIX(	bicne	sp, sp, #4	)
-	stmib	sp, {r1 - r12}
+#endif
+ SPFIX(	subeq	sp, sp, #4	)
+	stmia	sp, {r1 - r12}
 
 	ldmia	r0, {r1 - r3}
-	add	r5, sp, #S_SP		@ here for interlock avoidance
+	add	r5, sp, #S_SP - 4	@ here for interlock avoidance
 	mov	r4, #-1			@  ""  ""      ""       ""
-	add	r0, sp, #(S_FRAME_SIZE + \stack_hole)
- SPFIX(	addne	r0, r0, #4	)
-	str	r1, [sp]		@ save the "real" r0 copied
+	add	r0, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+ SPFIX(	addeq	r0, r0, #4	)
+	str	r1, [sp, #-4]!		@ save the "real" r0 copied
 					@ from the exception stack
 
 	mov	r1, lr
@@ -196,9 +206,8 @@ __dabt_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	r0, [sp, #S_PSR]
-	msr	spsr_cxsf, r0
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	ldr	r2, [sp, #S_PSR]
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__dabt_svc)
 
@@ -225,13 +234,12 @@ __irq_svc:
 	tst	r0, #_TIF_NEED_RESCHED
 	blne	svc_preempt
 #endif
-	ldr	r0, [sp, #S_PSR]		@ irqs are already disabled
-	msr	spsr_cxsf, r0
+	ldr	r4, [sp, #S_PSR]		@ irqs are already disabled
 #ifdef CONFIG_TRACE_IRQFLAGS
-	tst	r0, #PSR_I_BIT
+	tst	r4, #PSR_I_BIT
 	bleq	trace_hardirqs_on
 #endif
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	svc_exit r4				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__irq_svc)
 
@@ -266,7 +274,7 @@ __und_svc:
 	@  r0 - instruction
 	@
 	ldr	r0, [r2, #-4]
-	adr	r9, 1f
+	adr	r9, BSYM(1f)
 	bl	call_fpe
 
 	mov	r0, sp				@ struct pt_regs *regs
@@ -280,9 +288,8 @@ __und_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	lr, [sp, #S_PSR]		@ Get SVC cpsr
-	msr	spsr_cxsf, lr
-	ldmia	sp, {r0 - pc}^			@ Restore SVC registers
+	ldr	r2, [sp, #S_PSR]		@ Get SVC cpsr
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__und_svc)
 
@@ -323,9 +330,8 @@ __pabt_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	r0, [sp, #S_PSR]
-	msr	spsr_cxsf, r0
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	ldr	r2, [sp, #S_PSR]
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__pabt_svc)
 
@@ -353,7 +359,8 @@ ENDPROC(__pabt_svc)
  UNWIND(.fnstart	)
  UNWIND(.cantunwind	)	@ don't unwind the user space
 	sub	sp, sp, #S_FRAME_SIZE
-	stmib	sp, {r1 - r12}
+ ARM(	stmib	sp, {r1 - r12}	)
+ THUMB(	stmia	sp, {r0 - r12}	)
 
 	ldmia	r0, {r1 - r3}
 	add	r0, sp, #S_PC		@ here for interlock avoidance
@@ -372,7 +379,8 @@ ENDPROC(__pabt_svc)
 	@ Also, separately save sp_usr and lr_usr
 	@
 	stmia	r0, {r2 - r4}
-	stmdb	r0, {sp, lr}^
+ ARM(	stmdb	r0, {sp, lr}^			)
+ THUMB(	store_user_sp_lr r0, r1, S_SP - S_PC	)
 
 	@
 	@ Enable the alignment trap while in kernel mode
@@ -427,7 +435,7 @@ __dabt_usr:
 	@
 	enable_irq
 	mov	r2, sp
-	adr	lr, ret_from_exception
+	adr	lr, BSYM(ret_from_exception)
 	b	do_DataAbort
  UNWIND(.fnend		)
 ENDPROC(__dabt_usr)
@@ -452,7 +460,9 @@ __irq_usr:
 	ldr	r0, [tsk, #TI_PREEMPT]
 	str	r8, [tsk, #TI_PREEMPT]
 	teq	r0, r7
-	strne	r0, [r0, -r0]
+ ARM(	strne	r0, [r0, -r0]	)
+ THUMB(	movne	r0, #0		)
+ THUMB(	strne	r0, [r0]	)
 #endif
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_on
@@ -476,9 +486,10 @@ __und_usr:
 	@
 	@  r0 - instruction
 	@
-	adr	r9, ret_from_exception
-	adr	lr, __und_usr_unknown
+	adr	r9, BSYM(ret_from_exception)
+	adr	lr, BSYM(__und_usr_unknown)
 	tst	r3, #PSR_T_BIT			@ Thumb mode?
+	itet	eq				@ explicit IT needed for the 1f label
 	subeq	r4, r2, #4			@ ARM instr at LR - 4
 	subne	r4, r2, #2			@ Thumb instr at LR - 2
 1:	ldreqt	r0, [r4]
@@ -488,7 +499,10 @@ __und_usr:
 	beq	call_fpe
 	@ Thumb instruction
 #if __LINUX_ARM_ARCH__ >= 7
-2:	ldrht	r5, [r4], #2
+2:
+ ARM(	ldrht	r5, [r4], #2	)
+ THUMB(	ldrht	r5, [r4]	)
+ THUMB(	add	r4, r4, #2	)
 	and	r0, r5, #0xf800			@ mask bits 111x x... .... ....
 	cmp	r0, #0xe800			@ 32bit instruction if xx != 0
 	blo	__und_usr_unknown
@@ -577,9 +591,11 @@ call_fpe:
 	moveq	pc, lr
 	get_thread_info r10			@ get current thread
 	and	r8, r0, #0x00000f00		@ mask out CP number
+ THUMB(	lsr	r8, r8, #8		)
 	mov	r7, #1
 	add	r6, r10, #TI_USED_CP
-	strb	r7, [r6, r8, lsr #8]		@ set appropriate used_cp[]
+ ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
+ THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
 	@ Test if we need to give access to iWMMXt coprocessors
 	ldr	r5, [r10, #TI_FLAGS]
@@ -587,36 +603,38 @@ call_fpe:
 	movcss	r7, r5, lsr #(TIF_USING_IWMMXT + 1)
 	bcs	iwmmxt_task_enable
 #endif
-	add	pc, pc, r8, lsr #6
-	mov	r0, r0
-
-	mov	pc, lr				@ CP#0
-	b	do_fpe				@ CP#1 (FPE)
-	b	do_fpe				@ CP#2 (FPE)
-	mov	pc, lr				@ CP#3
+ ARM(	add	pc, pc, r8, lsr #6	)
+ THUMB(	lsl	r8, r8, #2		)
+ THUMB(	add	pc, r8			)
+	nop
+
+	W(mov)	pc, lr				@ CP#0
+	W(b)	do_fpe				@ CP#1 (FPE)
+	W(b)	do_fpe				@ CP#2 (FPE)
+	W(mov)	pc, lr				@ CP#3
 #ifdef CONFIG_CRUNCH
 	b	crunch_task_enable		@ CP#4 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#5 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#6 (MaverickCrunch)
 #else
-	mov	pc, lr				@ CP#4
-	mov	pc, lr				@ CP#5
-	mov	pc, lr				@ CP#6
+	W(mov)	pc, lr				@ CP#4
+	W(mov)	pc, lr				@ CP#5
+	W(mov)	pc, lr				@ CP#6
 #endif
-	mov	pc, lr				@ CP#7
-	mov	pc, lr				@ CP#8
-	mov	pc, lr				@ CP#9
+	W(mov)	pc, lr				@ CP#7
+	W(mov)	pc, lr				@ CP#8
+	W(mov)	pc, lr				@ CP#9
 #ifdef CONFIG_VFP
-	b	do_vfp				@ CP#10 (VFP)
-	b	do_vfp				@ CP#11 (VFP)
+	W(b)	do_vfp				@ CP#10 (VFP)
+	W(b)	do_vfp				@ CP#11 (VFP)
 #else
-	mov	pc, lr				@ CP#10 (VFP)
-	mov	pc, lr				@ CP#11 (VFP)
+	W(mov)	pc, lr				@ CP#10 (VFP)
+	W(mov)	pc, lr				@ CP#11 (VFP)
 #endif
-	mov	pc, lr				@ CP#12
-	mov	pc, lr				@ CP#13
-	mov	pc, lr				@ CP#14 (Debug)
-	mov	pc, lr				@ CP#15 (Control)
+	W(mov)	pc, lr				@ CP#12
+	W(mov)	pc, lr				@ CP#13
+	W(mov)	pc, lr				@ CP#14 (Debug)
+	W(mov)	pc, lr				@ CP#15 (Control)
 
 #ifdef CONFIG_NEON
 	.align	6
@@ -667,7 +685,7 @@ no_fp:	mov	pc, lr
 __und_usr_unknown:
 	enable_irq
 	mov	r0, sp
-	adr	lr, ret_from_exception
+	adr	lr, BSYM(ret_from_exception)
 	b	do_undefinstr
 ENDPROC(__und_usr_unknown)
 
@@ -711,7 +729,10 @@ ENTRY(__switch_to)
  UNWIND(.cantunwind	)
 	add	ip, r1, #TI_CPU_SAVE
 	ldr	r3, [r2, #TI_TP_VALUE]
-	stmia	ip!, {r4 - sl, fp, sp, lr}	@ Store most regs on stack
+ ARM(	stmia	ip!, {r4 - sl, fp, sp, lr} )	@ Store most regs on stack
+ THUMB(	stmia	ip!, {r4 - sl, fp}	   )	@ Store most regs on stack
+ THUMB(	str	sp, [ip], #4		   )
+ THUMB(	str	lr, [ip], #4		   )
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
@@ -736,8 +757,12 @@ ENTRY(__switch_to)
 	ldr	r0, =thread_notify_head
 	mov	r1, #THREAD_NOTIFY_SWITCH
 	bl	atomic_notifier_call_chain
+ THUMB(	mov	ip, r4			   )
 	mov	r0, r5
-	ldmia	r4, {r4 - sl, fp, sp, pc}	@ Load all regs saved previously
+ ARM(	ldmia	r4, {r4 - sl, fp, sp, pc}  )	@ Load all regs saved previously
+ THUMB(	ldmia	ip!, {r4 - sl, fp}	   )	@ Load all regs saved previously
+ THUMB(	ldr	sp, [ip], #4		   )
+ THUMB(	ldr	pc, [ip]		   )
  UNWIND(.fnend		)
 ENDPROC(__switch_to)
 
@@ -772,6 +797,7 @@ ENDPROC(__switch_to)
  * if your compiled code is not going to use the new instructions for other
  * purpose.
  */
+ THUMB(	.arm	)
 
 	.macro	usr_ret, reg
 #ifdef CONFIG_ARM_THUMB
@@ -1020,6 +1046,7 @@ __kuser_helper_version:				@ 0xffff0ffc
 	.globl	__kuser_helper_end
 __kuser_helper_end:
 
+ THUMB(	.thumb	)
 
 /*
  * Vector stubs.
@@ -1054,15 +1081,17 @@ vector_\name:
 	@ Prepare for SVC32 mode.  IRQs remain disabled.
 	@
 	mrs	r0, cpsr
-	eor	r0, r0, #(\mode ^ SVC_MODE)
+	eor	r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE)
 	msr	spsr_cxsf, r0
 
 	@
 	@ the branch table must immediately follow this code
 	@
 	and	lr, lr, #0x0f
+ THUMB(	adr	r0, 1f			)
+ THUMB(	ldr	lr, [r0, lr, lsl #2]	)
 	mov	r0, sp
-	ldr	lr, [pc, lr, lsl #2]
+ ARM(	ldr	lr, [pc, lr, lsl #2]	)
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
 
@@ -1206,14 +1235,16 @@ __stubs_end:
 
 	.globl	__vectors_start
 __vectors_start:
-	swi	SYS_ERROR0
-	b	vector_und + stubs_offset
-	ldr	pc, .LCvswi + stubs_offset
-	b	vector_pabt + stubs_offset
-	b	vector_dabt + stubs_offset
-	b	vector_addrexcptn + stubs_offset
-	b	vector_irq + stubs_offset
-	b	vector_fiq + stubs_offset
+ ARM(	swi	SYS_ERROR0	)
+ THUMB(	svc	#0		)
+ THUMB(	nop			)
+	W(b)	vector_und + stubs_offset
+	W(ldr)	pc, .LCvswi + stubs_offset
+	W(b)	vector_pabt + stubs_offset
+	W(b)	vector_dabt + stubs_offset
+	W(b)	vector_addrexcptn + stubs_offset
+	W(b)	vector_irq + stubs_offset
+	W(b)	vector_fiq + stubs_offset
 
 	.globl	__vectors_end
 __vectors_end:
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41..a0540c9f1f0 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -33,14 +33,7 @@ ret_fast_syscall:
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
 
-	@ fast_restore_user_regs
-	ldr	r1, [sp, #S_OFF + S_PSR]	@ get calling cpsr
-	ldr	lr, [sp, #S_OFF + S_PC]!	@ get pc
-	msr	spsr_cxsf, r1			@ save in spsr_svc
-	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
-	mov	r0, r0
-	add	sp, sp, #S_FRAME_SIZE - S_PC
-	movs	pc, lr				@ return & move spsr_svc into cpsr
+	restore_user_regs fast = 1, offset = S_OFF
  UNWIND(.fnend		)
 
 /*
@@ -73,14 +66,7 @@ no_work_pending:
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
 
-	@ slow_restore_user_regs
-	ldr	r1, [sp, #S_PSR]		@ get calling cpsr
-	ldr	lr, [sp, #S_PC]!		@ get pc
-	msr	spsr_cxsf, r1			@ save in spsr_svc
-	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
-	mov	r0, r0
-	add	sp, sp, #S_FRAME_SIZE - S_PC
-	movs	pc, lr				@ return & move spsr_svc into cpsr
+	restore_user_regs fast = 0, offset = 0
 ENDPROC(ret_to_user)
 
 /*
@@ -182,8 +168,10 @@ ftrace_stub:
 ENTRY(vector_swi)
 	sub	sp, sp, #S_FRAME_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0 - r12
-	add	r8, sp, #S_PC
-	stmdb	r8, {sp, lr}^			@ Calling sp, lr
+ ARM(	add	r8, sp, #S_PC		)
+ ARM(	stmdb	r8, {sp, lr}^		)	@ Calling sp, lr
+ THUMB(	mov	r8, sp			)
+ THUMB(	store_user_sp_lr r8, r10, S_SP	)	@ calling sp, lr
 	mrs	r8, spsr			@ called from non-FIQ mode, so ok.
 	str	lr, [sp, #S_PC]			@ Save calling PC
 	str	r8, [sp, #S_PSR]		@ Save CPSR
@@ -272,7 +260,7 @@ ENTRY(vector_swi)
 	bne	__sys_trace
 
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
-	adr	lr, ret_fast_syscall		@ return address
+	adr	lr, BSYM(ret_fast_syscall)	@ return address
 	ldrcc	pc, [tbl, scno, lsl #2]		@ call sys_* routine
 
 	add	r1, sp, #S_OFF
@@ -293,7 +281,7 @@ __sys_trace:
 	mov	r0, #0				@ trace entry [IP = 0]
 	bl	syscall_trace
 
-	adr	lr, __sys_trace_return		@ return address
+	adr	lr, BSYM(__sys_trace_return)	@ return address
 	mov	scno, r0			@ syscall number (possibly new)
 	add	r1, sp, #S_R0 + S_OFF		@ pointer to regs
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 87ab4e15799..a4eaf4f920c 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -36,11 +36,6 @@
 #endif
 	.endm
 
-	.macro	get_thread_info, rd
-	mov	\rd, sp, lsr #13
-	mov	\rd, \rd, lsl #13
-	.endm
-
 	.macro	alignment_trap, rtemp
 #ifdef CONFIG_ALIGNMENT_TRAP
 	ldr	\rtemp, .LCcralign
@@ -49,6 +44,93 @@
 #endif
 	.endm
 
+	@
+	@ Store/load the USER SP and LR registers by switching to the SYS
+	@ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not
+	@ available. Should only be called from SVC mode
+	@
+	.macro	store_user_sp_lr, rd, rtemp, offset = 0
+	mrs	\rtemp, cpsr
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch to the SYS mode
+
+	str	sp, [\rd, #\offset]		@ save sp_usr
+	str	lr, [\rd, #\offset + 4]		@ save lr_usr
+
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch back to the SVC mode
+	.endm
+
+	.macro	load_user_sp_lr, rd, rtemp, offset = 0
+	mrs	\rtemp, cpsr
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch to the SYS mode
+
+	ldr	sp, [\rd, #\offset]		@ load sp_usr
+	ldr	lr, [\rd, #\offset + 4]		@ load lr_usr
+
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch back to the SVC mode
+	.endm
+
+#ifndef CONFIG_THUMB2_KERNEL
+	.macro	svc_exit, rpsr
+	msr	spsr_cxsf, \rpsr
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	.endm
+
+	.macro	restore_user_regs, fast = 0, offset = 0
+	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
+	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
+	msr	spsr_cxsf, r1			@ save in spsr_svc
+	.if	\fast
+	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
+	.else
+	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
+	.endif
+	add	sp, sp, #S_FRAME_SIZE - S_PC
+	movs	pc, lr				@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro	get_thread_info, rd
+	mov	\rd, sp, lsr #13
+	mov	\rd, \rd, lsl #13
+	.endm
+#else	/* CONFIG_THUMB2_KERNEL */
+	.macro	svc_exit, rpsr
+	ldr	r0, [sp, #S_SP]			@ top of the stack
+	ldr	r1, [sp, #S_PC]			@ return address
+	tst	r0, #4				@ orig stack 8-byte aligned?
+	stmdb	r0, {r1, \rpsr}			@ rfe context
+	ldmia	sp, {r0 - r12}
+	ldr	lr, [sp, #S_LR]
+	addeq	sp, sp, #S_FRAME_SIZE - 8	@ aligned
+	addne	sp, sp, #S_FRAME_SIZE - 4	@ not aligned
+	rfeia	sp!
+	.endm
+
+	.macro	restore_user_regs, fast = 0, offset = 0
+	mov	r2, sp
+	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
+	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
+	ldr	lr, [sp, #\offset + S_PC]	@ get pc
+	add	sp, sp, #\offset + S_SP
+	msr	spsr_cxsf, r1			@ save in spsr_svc
+	.if	\fast
+	ldmdb	sp, {r1 - r12}			@ get calling r1 - r12
+	.else
+	ldmdb	sp, {r0 - r12}			@ get calling r0 - r12
+	.endif
+	add	sp, sp, #S_FRAME_SIZE - S_SP
+	movs	pc, lr				@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro	get_thread_info, rd
+	mov	\rd, sp
+	lsr	\rd, \rd, #13
+	mov	\rd, \rd, lsl #13
+	.endm
+#endif	/* !CONFIG_THUMB2_KERNEL */
 
 /*
  * These are the registers used in the syscall handler, and allow us to
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index dbfaef07a1f..93ad576b2d7 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -52,7 +52,9 @@ __mmap_switched:
 	strcc	fp, [r6],#4
 	bcc	1b
 
-	ldmia	r3, {r4, r5, r6, r7, sp}
+ ARM(	ldmia	r3, {r4, r5, r6, r7, sp})
+ THUMB(	ldmia	r3, {r4, r5, r6, r7}	)
+ THUMB(	ldr	sp, [r3, #16]		)
 	str	r9, [r4]			@ Save processor ID
 	str	r1, [r5]			@ Save machine type
 	str	r2, [r6]			@ Save atags pointer
@@ -156,7 +158,8 @@ ENDPROC(__error)
  */
 __lookup_processor_type:
 	adr	r3, 3f
-	ldmda	r3, {r5 - r7}
+	ldmia	r3, {r5 - r7}
+	add	r3, r3, #8
 	sub	r3, r3, r7			@ get offset between virt&phys
 	add	r5, r5, r3			@ convert virt addresses to
 	add	r6, r6, r3			@ physical address space
@@ -187,9 +190,9 @@ ENDPROC(lookup_processor_type)
  * more information about the __proc_info and __arch_info structures.
  */
 	.align	2
-	.long	__proc_info_begin
+3:	.long	__proc_info_begin
 	.long	__proc_info_end
-3:	.long	.
+4:	.long	.
 	.long	__arch_info_begin
 	.long	__arch_info_end
 
@@ -205,7 +208,7 @@ ENDPROC(lookup_processor_type)
  *  r5 = mach_info pointer in physical address space
  */
 __lookup_machine_type:
-	adr	r3, 3b
+	adr	r3, 4b
 	ldmia	r3, {r4, r5, r6}
 	sub	r3, r3, r4			@ get offset between virt&phys
 	add	r5, r5, r3			@ convert virt addresses to
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index cc87e1765ed..b16393d2b71 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -34,7 +34,7 @@
  */
 	.section ".text.head", "ax"
 ENTRY(stext)
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
 #ifndef CONFIG_CPU_CP15
 	ldr	r9, =CONFIG_PROCESSOR_ID
@@ -50,8 +50,10 @@ ENTRY(stext)
 
 	ldr	r13, __switch_data		@ address to jump to after
 						@ the initialization is done
-	adr	lr, __after_proc_init		@ return (PIC) address
-	add	pc, r10, #PROCINFO_INITFUNC
+	adr	lr, BSYM(__after_proc_init)	@ return (PIC) address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(stext)
 
 /*
@@ -82,7 +84,8 @@ __after_proc_init:
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 #endif /* CONFIG_CPU_CP15 */
 
-	mov	pc, r13				@ clear the BSS and jump
+	mov	r3, r13
+	mov	pc, r3				@ clear the BSS and jump
 						@ to start_kernel
 ENDPROC(__after_proc_init)
 	.ltorg
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 21e17dc94cb..38ccbe1d3b2 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -76,7 +76,7 @@
  */
 	.section ".text.head", "ax"
 ENTRY(stext)
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
@@ -97,8 +97,10 @@ ENTRY(stext)
 	 */
 	ldr	r13, __switch_data		@ address to jump to after
 						@ mmu has been enabled
-	adr	lr, __enable_mmu		@ return (PIC) address
-	add	pc, r10, #PROCINFO_INITFUNC
+	adr	lr, BSYM(__enable_mmu)		@ return (PIC) address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(stext)
 
 #if defined(CONFIG_SMP)
@@ -110,7 +112,7 @@ ENTRY(secondary_startup)
 	 * the processor type - there is no need to check the machine type
 	 * as it has already been validated by the primary processor.
 	 */
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type
 	movs	r10, r5				@ invalid processor?
@@ -121,12 +123,15 @@ ENTRY(secondary_startup)
 	 * Use the page tables supplied from  __cpu_up.
 	 */
 	adr	r4, __secondary_data
-	ldmia	r4, {r5, r7, r13}		@ address to jump to after
+	ldmia	r4, {r5, r7, r12}		@ address to jump to after
 	sub	r4, r4, r5			@ mmu has been enabled
 	ldr	r4, [r7, r4]			@ get secondary_data.pgdir
-	adr	lr, __enable_mmu		@ return address
-	add	pc, r10, #PROCINFO_INITFUNC	@ initialise processor
-						@ (return control reg)
+	adr	lr, BSYM(__enable_mmu)		@ return address
+	mov	r13, r12			@ __secondary_switched address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	) @ initialise processor
+						  @ (return control reg)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(secondary_startup)
 
 	/*
@@ -193,8 +198,8 @@ __turn_mmu_on:
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 	mrc	p15, 0, r3, c0, c0, 0		@ read id reg
 	mov	r3, r3
-	mov	r3, r3
-	mov	pc, r13
+	mov	r3, r13
+	mov	pc, r3
 ENDPROC(__turn_mmu_on)
 
 
@@ -235,7 +240,8 @@ __create_page_tables:
 	 * will be removed by paging_init().  We use our current program
 	 * counter to determine corresponding section base address.
 	 */
-	mov	r6, pc, lsr #20			@ start of kernel section
+	mov	r6, pc
+	mov	r6, r6, lsr #20			@ start of kernel section
 	orr	r3, r7, r6, lsl #20		@ flags + kernel base
 	str	r3, [r4, r6, lsl #2]		@ identity mapping
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 39196dff478..790fbee92ec 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -388,7 +388,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.ARM_r2 = (unsigned long)fn;
 	regs.ARM_r3 = (unsigned long)kernel_thread_exit;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
+	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index bc5e4128f9f..d4d4f77c91b 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -25,6 +25,7 @@
 #include <linux/smp.h>
 #include <linux/fs.h>
 
+#include <asm/unified.h>
 #include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/elf.h>
@@ -326,26 +327,39 @@ void cpu_init(void)
 		BUG();
 	}
 
+	/*
+	 * Define the placement constraint for the inline asm directive below.
+	 * In Thumb-2, msr with an immediate value is not allowed.
+	 */
+#ifdef CONFIG_THUMB2_KERNEL
+#define PLC	"r"
+#else
+#define PLC	"I"
+#endif
+
 	/*
 	 * setup stacks for re-entrant exception handlers
 	 */
 	__asm__ (
 	"msr	cpsr_c, %1\n\t"
-	"add	sp, %0, %2\n\t"
+	"add	r14, %0, %2\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %3\n\t"
-	"add	sp, %0, %4\n\t"
+	"add	r14, %0, %4\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %5\n\t"
-	"add	sp, %0, %6\n\t"
+	"add	r14, %0, %6\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %7"
 	    :
 	    : "r" (stk),
-	      "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
 	      "I" (offsetof(struct stack, irq[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
 	      "I" (offsetof(struct stack, abt[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
 	      "I" (offsetof(struct stack, und[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+	      PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
 	    : "r14");
 }
 
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index dd56e11f339..39baf1128bf 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -62,7 +62,11 @@ struct unwind_ctrl_block {
 };
 
 enum regs {
+#ifdef CONFIG_THUMB2_KERNEL
+	FP = 7,
+#else
 	FP = 11,
+#endif
 	SP = 13,
 	LR = 14,
 	PC = 15
-- 
GitLab


From 347c8b70b1d5256e445e54e736f88d21877616cf Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:56 +0100
Subject: [PATCH 061/257] Thumb-2: Implement the unified arch/arm/mm support

This patch adds the ARM/Thumb-2 unified support to the arch/arm/mm/*
files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/alignment.c | 20 +++++++++++++++-----
 arch/arm/mm/cache-v7.S  | 16 +++++++++++-----
 arch/arm/mm/proc-v7.S   |  5 ++++-
 3 files changed, 30 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 03cd27d917b..b270d6228fe 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -159,7 +159,9 @@ union offset_union {
 
 #define __get8_unaligned_check(ins,val,addr,err)	\
 	__asm__(					\
-	"1:	"ins"	%1, [%2], #1\n"			\
+ ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
+ THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
+ THUMB(	"	add	%2, %2, #1\n"	)		\
 	"2:\n"						\
 	"	.section .fixup,\"ax\"\n"		\
 	"	.align	2\n"				\
@@ -215,7 +217,9 @@ union offset_union {
 	do {							\
 		unsigned int err = 0, v = val, a = addr;	\
 		__asm__( FIRST_BYTE_16				\
-		"1:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
 		"2:	"ins"	%1, [%2]\n"			\
 		"3:\n"						\
@@ -245,11 +249,17 @@ union offset_union {
 	do {							\
 		unsigned int err = 0, v = val, a = addr;	\
 		__asm__( FIRST_BYTE_32				\
-		"1:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
-		"2:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"2:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"2:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
-		"3:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"3:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"3:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
 		"4:	"ins"	%1, [%2]\n"			\
 		"5:\n"						\
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index be93ff02a98..bda0ec31a4e 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -21,7 +21,7 @@
  *
  *	Flush the whole D-cache.
  *
- *	Corrupted registers: r0-r5, r7, r9-r11
+ *	Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
  *
  *	- mm    - mm_struct describing address space
  */
@@ -51,8 +51,12 @@ loop1:
 loop2:
 	mov	r9, r4				@ create working copy of max way size
 loop3:
-	orr	r11, r10, r9, lsl r5		@ factor way and cache number into r11
-	orr	r11, r11, r7, lsl r2		@ factor index number into r11
+ ARM(	orr	r11, r10, r9, lsl r5	)	@ factor way and cache number into r11
+ THUMB(	lsl	r6, r9, r5		)
+ THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
+ ARM(	orr	r11, r11, r7, lsl r2	)	@ factor index number into r11
+ THUMB(	lsl	r6, r7, r2		)
+ THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
 	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
 	subs	r9, r9, #1			@ decrement the way
 	bge	loop3
@@ -82,11 +86,13 @@ ENDPROC(v7_flush_dcache_all)
  *
  */
 ENTRY(v7_flush_kern_cache_all)
-	stmfd	sp!, {r4-r5, r7, r9-r11, lr}
+ ARM(	stmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
+ THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
 	bl	v7_flush_dcache_all
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
-	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}
+ ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
+ THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
 	mov	pc, lr
 ENDPROC(v7_flush_kern_cache_all)
 
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 180a08d03a0..c19aecdb202 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -127,7 +127,9 @@ ENDPROC(cpu_v7_switch_mm)
  */
 ENTRY(cpu_v7_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
+ ARM(	str	r1, [r0], #-2048	)	@ linux version
+ THUMB(	str	r1, [r0]		)	@ linux version
+ THUMB(	sub	r0, r0, #2048		)
 
 	bic	r3, r1, #0x000003f0
 	bic	r3, r3, #PTE_TYPE_MASK
@@ -273,6 +275,7 @@ __v7_setup:
    	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
+ THUMB(	orr	r0, r0, #1 << 30	)	@ Thumb exceptions
 	mov	pc, lr				@ return to head.S:__ret
 ENDPROC(__v7_setup)
 
-- 
GitLab


From 8b592783a2e8b7721a99730bd549aab5208f36af Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:57 +0100
Subject: [PATCH 062/257] Thumb-2: Implement the unified arch/arm/lib functions

This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/*
files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/assembler.h   | 73 ++++++++++++++++++++++++++++++
 arch/arm/include/asm/uaccess.h     |  7 ++-
 arch/arm/lib/ashldi3.S             |  4 +-
 arch/arm/lib/ashrdi3.S             |  4 +-
 arch/arm/lib/backtrace.S           |  8 +++-
 arch/arm/lib/clear_user.S          | 15 +++---
 arch/arm/lib/copy_from_user.S      | 19 ++++----
 arch/arm/lib/copy_template.S       | 24 +++++++++-
 arch/arm/lib/copy_to_user.S        | 19 ++++----
 arch/arm/lib/csumpartialcopyuser.S | 48 ++++++--------------
 arch/arm/lib/div64.S               |  4 +-
 arch/arm/lib/findbit.S             | 34 ++++++++++----
 arch/arm/lib/getuser.S             |  5 ++
 arch/arm/lib/io-writesw-armv4.S    |  5 +-
 arch/arm/lib/lshrdi3.S             |  4 +-
 arch/arm/lib/memcpy.S              |  7 ++-
 arch/arm/lib/memmove.S             | 28 ++++++------
 arch/arm/lib/putuser.S             | 15 ++++++
 arch/arm/lib/strncpy_from_user.S   |  2 +-
 arch/arm/lib/strnlen_user.S        |  2 +-
 20 files changed, 229 insertions(+), 98 deletions(-)

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 1acd1da36d0..2b60c7d0577 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -138,3 +138,76 @@
 	msr	cpsr_c, #\mode
 	.endm
 #endif
+
+/*
+ * STRT/LDRT access macros with ARM and Thumb-2 variants
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+
+	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort
+9999:
+	.if	\inc == 1
+	\instr\cond\()bt \reg, [\ptr, #\off]
+	.elseif	\inc == 4
+	\instr\cond\()t \reg, [\ptr, #\off]
+	.else
+	.error	"Unsupported inc macro argument"
+	.endif
+
+	.section __ex_table,"a"
+	.align	3
+	.long	9999b, \abort
+	.previous
+	.endm
+
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
+	@ explicit IT instruction needed because of the label
+	@ introduced by the USER macro
+	.ifnc	\cond,al
+	.if	\rept == 1
+	itt	\cond
+	.elseif	\rept == 2
+	ittt	\cond
+	.else
+	.error	"Unsupported rept macro argument"
+	.endif
+	.endif
+
+	@ Slightly optimised to avoid incrementing the pointer twice
+	usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
+	.if	\rept == 2
+	usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+	.endif
+
+	add\cond \ptr, #\rept * \inc
+	.endm
+
+#else	/* !CONFIG_THUMB2_KERNEL */
+
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
+	.rept	\rept
+9999:
+	.if	\inc == 1
+	\instr\cond\()bt \reg, [\ptr], #\inc
+	.elseif	\inc == 4
+	\instr\cond\()t \reg, [\ptr], #\inc
+	.else
+	.error	"Unsupported inc macro argument"
+	.endif
+
+	.section __ex_table,"a"
+	.align	3
+	.long	9999b, \abort
+	.previous
+	.endr
+	.endm
+
+#endif	/* CONFIG_THUMB2_KERNEL */
+
+	.macro	strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+	usracc	str, \reg, \ptr, \inc, \cond, \rept, \abort
+	.endm
+
+	.macro	ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+	usracc	ldr, \reg, \ptr, \inc, \cond, \rept, \abort
+	.endm
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 0da9bc9b3b1..1d6bd40a432 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -17,6 +17,7 @@
 #include <asm/memory.h>
 #include <asm/domain.h>
 #include <asm/system.h>
+#include <asm/unified.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
@@ -365,8 +366,10 @@ do {									\
 
 #define __put_user_asm_dword(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	strt	" __reg_oper1 ", [%1], #4\n"		\
-	"2:	strt	" __reg_oper0 ", [%1]\n"		\
+ ARM(	"1:	strt	" __reg_oper1 ", [%1], #4\n"	)	\
+ ARM(	"2:	strt	" __reg_oper0 ", [%1]\n"	)	\
+ THUMB(	"1:	strt	" __reg_oper1 ", [%1]\n"	)	\
+ THUMB(	"2:	strt	" __reg_oper0 ", [%1, #4]\n"	)	\
 	"3:\n"							\
 	"	.section .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S
index 1154d924080..638deb13da1 100644
--- a/arch/arm/lib/ashldi3.S
+++ b/arch/arm/lib/ashldi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_llsl)
 	rsb	ip, r2, #32
 	movmi	ah, ah, lsl r2
 	movpl	ah, al, lsl r3
-	orrmi	ah, ah, al, lsr ip
+ ARM(	orrmi	ah, ah, al, lsr ip	)
+ THUMB(	lsrmi	r3, al, ip		)
+ THUMB(	orrmi	ah, ah, r3		)
 	mov	al, al, lsl r2
 	mov	pc, lr
 
diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S
index 9f8b35572f8..015e8aa5a1d 100644
--- a/arch/arm/lib/ashrdi3.S
+++ b/arch/arm/lib/ashrdi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_lasr)
 	rsb	ip, r2, #32
 	movmi	al, al, lsr r2
 	movpl	al, ah, asr r3
-	orrmi	al, al, ah, lsl ip
+ ARM(	orrmi	al, al, ah, lsl ip	)
+ THUMB(	lslmi	r3, ah, ip		)
+ THUMB(	orrmi	al, al, r3		)
 	mov	ah, ah, asr r2
 	mov	pc, lr
 
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index b0951d0e8b2..aaf7220d9e3 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -38,7 +38,9 @@ ENDPROC(c_backtrace)
 		beq	no_frame		@ we have no stack frames
 
 		tst	r1, #0x10		@ 26 or 32-bit mode?
-		moveq	mask, #0xfc000003	@ mask for 26-bit
+ ARM(		moveq	mask, #0xfc000003	)
+ THUMB(		moveq	mask, #0xfc000000	)
+ THUMB(		orreq	mask, #0x03		)
 		movne	mask, #0		@ mask for 32-bit
 
 1:		stmfd	sp!, {pc}		@ calculate offset of PC stored
@@ -126,7 +128,9 @@ ENDPROC(c_backtrace)
 		mov	reg, #10
 		mov	r7, #0
 1:		mov	r3, #1
-		tst	instr, r3, lsl reg
+ ARM(		tst	instr, r3, lsl reg	)
+ THUMB(		lsl	r3, reg			)
+ THUMB(		tst	instr, r3		)
 		beq	2f
 		add	r7, r7, #1
 		teq	r7, #6
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 844f56785eb..1279abd8b88 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -27,21 +27,20 @@ WEAK(__clear_user)
 		ands	ip, r0, #3
 		beq	1f
 		cmp	ip, #2
-USER(		strbt	r2, [r0], #1)
-USER(		strlebt	r2, [r0], #1)
-USER(		strltbt	r2, [r0], #1)
+		strusr	r2, r0, 1
+		strusr	r2, r0, 1, le
+		strusr	r2, r0, 1, lt
 		rsb	ip, ip, #4
 		sub	r1, r1, ip		@  7  6  5  4  3  2  1
 1:		subs	r1, r1, #8		@ -1 -2 -3 -4 -5 -6 -7
-USER(		strplt	r2, [r0], #4)
-USER(		strplt	r2, [r0], #4)
+		strusr	r2, r0, 4, pl, rept=2
 		bpl	1b
 		adds	r1, r1, #4		@  3  2  1  0 -1 -2 -3
-USER(		strplt	r2, [r0], #4)
+		strusr	r2, r0, 4, pl
 2:		tst	r1, #2			@ 1x 1x 0x 0x 1x 1x 0x
-USER(		strnebt	r2, [r0], #1)
-USER(		strnebt	r2, [r0], #1)
+		strusr	r2, r0, 1, ne, rept=2
 		tst	r1, #1			@ x1 x0 x1 x0 x1 x0 x1
+		it	ne			@ explicit IT needed for the label
 USER(		strnebt	r2, [r0])
 		mov	r0, #0
 		ldmfd	sp!, {r1, pc}
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index 56799a165cc..e4fe124aced 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -33,11 +33,15 @@
  *	Number of bytes NOT copied.
  */
 
+#ifndef CONFIG_THUMB2_KERNEL
+#define LDR1W_SHIFT	0
+#else
+#define LDR1W_SHIFT	1
+#endif
+#define STR1W_SHIFT	0
+
 	.macro ldr1w ptr reg abort
-100:	ldrt \reg, [\ptr], #4
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	ldrusr	\reg, \ptr, 4, abort=\abort
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -53,14 +57,11 @@
 	.endm
 
 	.macro ldr1b ptr reg cond=al abort
-100:	ldr\cond\()bt \reg, [\ptr], #1
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	ldrusr	\reg, \ptr, 1, \cond, abort=\abort
 	.endm
 
 	.macro str1w ptr reg abort
-	str \reg, [\ptr], #4
+	W(str) \reg, [\ptr], #4
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index 139cce64605..805e3f8fb00 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -57,6 +57,13 @@
  *
  *	Restore registers with the values previously saved with the
  *	'preserv' macro. Called upon code termination.
+ *
+ * LDR1W_SHIFT
+ * STR1W_SHIFT
+ *
+ *	Correction to be applied to the "ip" register when branching into
+ *	the ldr1w or str1w instructions (some of these macros may expand to
+ *	than one 32bit instruction in Thumb-2)
  */
 
 
@@ -99,9 +106,15 @@
 
 5:		ands	ip, r2, #28
 		rsb	ip, ip, #32
+#if LDR1W_SHIFT > 0
+		lsl	ip, ip, #LDR1W_SHIFT
+#endif
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
-6:		nop
+6:
+		.rept	(1 << LDR1W_SHIFT)
+		W(nop)
+		.endr
 		ldr1w	r1, r3, abort=20f
 		ldr1w	r1, r4, abort=20f
 		ldr1w	r1, r5, abort=20f
@@ -110,9 +123,16 @@
 		ldr1w	r1, r8, abort=20f
 		ldr1w	r1, lr, abort=20f
 
+#if LDR1W_SHIFT < STR1W_SHIFT
+		lsl	ip, ip, #STR1W_SHIFT - LDR1W_SHIFT
+#elif LDR1W_SHIFT > STR1W_SHIFT
+		lsr	ip, ip, #LDR1W_SHIFT - STR1W_SHIFT
+#endif
 		add	pc, pc, ip
 		nop
-		nop
+		.rept	(1 << STR1W_SHIFT)
+		W(nop)
+		.endr
 		str1w	r0, r3, abort=20f
 		str1w	r0, r4, abort=20f
 		str1w	r0, r5, abort=20f
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 878820f0a32..1a71e158444 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -33,8 +33,15 @@
  *	Number of bytes NOT copied.
  */
 
+#define LDR1W_SHIFT	0
+#ifndef CONFIG_THUMB2_KERNEL
+#define STR1W_SHIFT	0
+#else
+#define STR1W_SHIFT	1
+#endif
+
 	.macro ldr1w ptr reg abort
-	ldr \reg, [\ptr], #4
+	W(ldr) \reg, [\ptr], #4
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -50,10 +57,7 @@
 	.endm
 
 	.macro str1w ptr reg abort
-100:	strt \reg, [\ptr], #4
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	strusr	\reg, \ptr, 4, abort=\abort
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
@@ -68,10 +72,7 @@
 	.endm
 
 	.macro str1b ptr reg cond=al abort
-100:	str\cond\()bt \reg, [\ptr], #1
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	strusr	\reg, \ptr, 1, \cond, abort=\abort
 	.endm
 
 	.macro enter reg1 reg2
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 14677fb4b0c..fd0e9dcd9fd 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -26,50 +26,28 @@
 		.endm
 
 		.macro	load1b,	reg1
-9999:		ldrbt	\reg1, [r0], $1
-		.section __ex_table, "a"
-		.align	3
-		.long	9999b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 1
 		.endm
 
 		.macro	load2b, reg1, reg2
-9999:		ldrbt	\reg1, [r0], $1
-9998:		ldrbt	\reg2, [r0], $1
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 1
+		ldrusr	\reg2, r0, 1
 		.endm
 
 		.macro	load1l, reg1
-9999:		ldrt	\reg1, [r0], $4
-		.section __ex_table, "a"
-		.align	3
-		.long	9999b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
 		.endm
 
 		.macro	load2l, reg1, reg2
-9999:		ldrt	\reg1, [r0], $4
-9998:		ldrt	\reg2, [r0], $4
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
+		ldrusr	\reg2, r0, 4
 		.endm
 
 		.macro	load4l, reg1, reg2, reg3, reg4
-9999:		ldrt	\reg1, [r0], $4
-9998:		ldrt	\reg2, [r0], $4
-9997:		ldrt	\reg3, [r0], $4
-9996:		ldrt	\reg4, [r0], $4
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.long	9997b, 6001f
-		.long	9996b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
+		ldrusr	\reg2, r0, 4
+		ldrusr	\reg3, r0, 4
+		ldrusr	\reg4, r0, 4
 		.endm
 
 /*
@@ -92,14 +70,14 @@
  */
 		.section .fixup,"ax"
 		.align	4
-6001:		mov	r4, #-EFAULT
+9001:		mov	r4, #-EFAULT
 		ldr	r5, [fp, #4]		@ *err_ptr
 		str	r4, [r5]
 		ldmia	sp, {r1, r2}		@ retrieve dst, len
 		add	r2, r2, r1
 		mov	r0, #0			@ zero the buffer
-6002:		teq	r2, r1
+9002:		teq	r2, r1
 		strneb	r0, [r1], #1
-		bne	6002b
+		bne	9002b
 		load_regs
 		.previous
diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S
index 1425e789ba8..faa7748142d 100644
--- a/arch/arm/lib/div64.S
+++ b/arch/arm/lib/div64.S
@@ -177,7 +177,9 @@ ENTRY(__do_div64)
 	mov	yh, xh, lsr ip
 	mov	yl, xl, lsr ip
 	rsb	ip, ip, #32
-	orr	yl, yl, xh, lsl ip
+ ARM(	orr	yl, yl, xh, lsl ip	)
+ THUMB(	lsl	xh, xh, ip		)
+ THUMB(	orr	yl, yl, xh		)
 	mov	xh, xl, lsl ip
 	mov	xh, xh, lsr ip
 	mov	pc, lr
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index 8c4defc4f3c..1e4cbd4e7be 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -25,7 +25,10 @@ ENTRY(_find_first_zero_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
-1:		ldrb	r3, [r0, r2, lsr #3]
+1:
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eors	r3, r3, #0xff		@ invert bits
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -44,7 +47,9 @@ ENTRY(_find_next_zero_bit_le)
 		beq	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
-		ldrb	r3, [r0, r2, lsr #3]
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
@@ -61,7 +66,10 @@ ENTRY(_find_first_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
-1:		ldrb	r3, [r0, r2, lsr #3]
+1:
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -80,7 +88,9 @@ ENTRY(_find_next_bit_le)
 		beq	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
-		ldrb	r3, [r0, r2, lsr #3]
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
@@ -95,7 +105,9 @@ ENTRY(_find_first_zero_bit_be)
 		beq	3f
 		mov	r2, #0
 1:		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eors	r3, r3, #0xff		@ invert bits
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -111,7 +123,9 @@ ENTRY(_find_next_zero_bit_be)
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
@@ -125,7 +139,9 @@ ENTRY(_find_first_bit_be)
 		beq	3f
 		mov	r2, #0
 1:		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -141,7 +157,9 @@ ENTRY(_find_next_bit_be)
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 6763088b760..a1814d92712 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -36,8 +36,13 @@ ENTRY(__get_user_1)
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
+#ifdef CONFIG_THUMB2_KERNEL
+2:	ldrbt	r2, [r0]
+3:	ldrbt	r3, [r0, #1]
+#else
 2:	ldrbt	r2, [r0], #1
 3:	ldrbt	r3, [r0]
+#endif
 #ifndef __ARMEB__
 	orr	r2, r2, r3, lsl #8
 #else
diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S
index d6585612c86..ff4f71b579e 100644
--- a/arch/arm/lib/io-writesw-armv4.S
+++ b/arch/arm/lib/io-writesw-armv4.S
@@ -75,7 +75,10 @@ ENTRY(__raw_writesw)
 #endif
 
 .Loutsw_noalign:
-		ldr	r3, [r1, -r3]!
+ ARM(		ldr	r3, [r1, -r3]!	)
+ THUMB(		rsb	r3, r3, #0	)
+ THUMB(		ldr	r3, [r1, r3]	)
+ THUMB(		sub	r1, r3		)
 		subcs	r2, r2, #1
 		bcs	2f
 		subs	r2, r2, #2
diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S
index 99ea338bf87..f83d449141f 100644
--- a/arch/arm/lib/lshrdi3.S
+++ b/arch/arm/lib/lshrdi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_llsr)
 	rsb	ip, r2, #32
 	movmi	al, al, lsr r2
 	movpl	al, ah, lsr r3
-	orrmi	al, al, ah, lsl ip
+ ARM(	orrmi	al, al, ah, lsl ip	)
+ THUMB(	lslmi	r3, ah, ip		)
+ THUMB(	orrmi	al, al, r3		)
 	mov	ah, ah, lsr r2
 	mov	pc, lr
 
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index e0d002641d3..a9b9e2287a0 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -13,8 +13,11 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+#define LDR1W_SHIFT	0
+#define STR1W_SHIFT	0
+
 	.macro ldr1w ptr reg abort
-	ldr \reg, [\ptr], #4
+	W(ldr) \reg, [\ptr], #4
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -30,7 +33,7 @@
 	.endm
 
 	.macro str1w ptr reg abort
-	str \reg, [\ptr], #4
+	W(str) \reg, [\ptr], #4
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 12549187088..5025c863713 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -75,24 +75,24 @@ ENTRY(memmove)
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
 6:		nop
-		ldr	r3, [r1, #-4]!
-		ldr	r4, [r1, #-4]!
-		ldr	r5, [r1, #-4]!
-		ldr	r6, [r1, #-4]!
-		ldr	r7, [r1, #-4]!
-		ldr	r8, [r1, #-4]!
-		ldr	lr, [r1, #-4]!
+		W(ldr)	r3, [r1, #-4]!
+		W(ldr)	r4, [r1, #-4]!
+		W(ldr)	r5, [r1, #-4]!
+		W(ldr)	r6, [r1, #-4]!
+		W(ldr)	r7, [r1, #-4]!
+		W(ldr)	r8, [r1, #-4]!
+		W(ldr)	lr, [r1, #-4]!
 
 		add	pc, pc, ip
 		nop
 		nop
-		str	r3, [r0, #-4]!
-		str	r4, [r0, #-4]!
-		str	r5, [r0, #-4]!
-		str	r6, [r0, #-4]!
-		str	r7, [r0, #-4]!
-		str	r8, [r0, #-4]!
-		str	lr, [r0, #-4]!
+		W(str)	r3, [r0, #-4]!
+		W(str)	r4, [r0, #-4]!
+		W(str)	r5, [r0, #-4]!
+		W(str)	r6, [r0, #-4]!
+		W(str)	r7, [r0, #-4]!
+		W(str)	r8, [r0, #-4]!
+		W(str)	lr, [r0, #-4]!
 
 	CALGN(	bcs	2b			)
 
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 864f3c1c4f1..02fedbf07c0 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -37,6 +37,15 @@ ENDPROC(__put_user_1)
 
 ENTRY(__put_user_2)
 	mov	ip, r2, lsr #8
+#ifdef CONFIG_THUMB2_KERNEL
+#ifndef __ARMEB__
+2:	strbt	r2, [r0]
+3:	strbt	ip, [r0, #1]
+#else
+2:	strbt	ip, [r0]
+3:	strbt	r2, [r0, #1]
+#endif
+#else	/* !CONFIG_THUMB2_KERNEL */
 #ifndef __ARMEB__
 2:	strbt	r2, [r0], #1
 3:	strbt	ip, [r0]
@@ -44,6 +53,7 @@ ENTRY(__put_user_2)
 2:	strbt	ip, [r0], #1
 3:	strbt	r2, [r0]
 #endif
+#endif	/* CONFIG_THUMB2_KERNEL */
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_2)
@@ -55,8 +65,13 @@ ENTRY(__put_user_4)
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
+#ifdef CONFIG_THUMB2_KERNEL
+5:	strt	r2, [r0]
+6:	strt	r3, [r0, #4]
+#else
 5:	strt	r2, [r0], #4
 6:	strt	r3, [r0]
+#endif
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_8)
diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S
index 330373c26dd..1c9814f346c 100644
--- a/arch/arm/lib/strncpy_from_user.S
+++ b/arch/arm/lib/strncpy_from_user.S
@@ -23,7 +23,7 @@
 ENTRY(__strncpy_from_user)
 	mov	ip, r1
 1:	subs	r2, r2, #1
-USER(	ldrplbt	r3, [r1], #1)
+	ldrusr	r3, r1, 1, pl
 	bmi	2f
 	strb	r3, [r0], #1
 	teq	r3, #0
diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S
index 90bb9d02083..7855b290665 100644
--- a/arch/arm/lib/strnlen_user.S
+++ b/arch/arm/lib/strnlen_user.S
@@ -23,7 +23,7 @@
 ENTRY(__strnlen_user)
 	mov	r2, r0
 1:
-USER(	ldrbt	r3, [r0], #1)
+	ldrusr	r3, r0, 1
 	teq	r3, #0
 	beq	2f
 	subs	r1, r1, #1
-- 
GitLab


From 07f33a035ddda78095bed64f39db54334776841d Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:57 +0100
Subject: [PATCH 063/257] Thumb-2: Implement the unified VFP support

This patch modifies the VFP files for the ARM/Thumb-2 unified
assembly syntax.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/vfp/vfphw.S | 48 +++++++++++++++++++++++++++++---------------
 1 file changed, 32 insertions(+), 16 deletions(-)

diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 1aeae38725d..66dc2d03b7f 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -209,40 +209,55 @@ ENDPROC(vfp_save_state)
 last_VFP_context_address:
 	.word	last_VFP_context
 
-ENTRY(vfp_get_float)
-	add	pc, pc, r0, lsl #3
+	.macro	tbl_branch, base, tmp, shift
+#ifdef CONFIG_THUMB2_KERNEL
+	adr	\tmp, 1f
+	add	\tmp, \tmp, \base, lsl \shift
+	mov	pc, \tmp
+#else
+	add	pc, pc, \base, lsl \shift
 	mov	r0, r0
+#endif
+1:
+	.endm
+
+ENTRY(vfp_get_float)
+	tbl_branch r0, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mrc	p10, 0, r0, c\dr, c0, 0	@ fmrs	r0, s0
+1:	mrc	p10, 0, r0, c\dr, c0, 0	@ fmrs	r0, s0
 	mov	pc, lr
-	mrc	p10, 0, r0, c\dr, c0, 4	@ fmrs	r0, s1
+	.org	1b + 8
+1:	mrc	p10, 0, r0, c\dr, c0, 4	@ fmrs	r0, s1
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 ENDPROC(vfp_get_float)
 
 ENTRY(vfp_put_float)
-	add	pc, pc, r1, lsl #3
-	mov	r0, r0
+	tbl_branch r1, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mcr	p10, 0, r0, c\dr, c0, 0	@ fmsr	r0, s0
+1:	mcr	p10, 0, r0, c\dr, c0, 0	@ fmsr	r0, s0
 	mov	pc, lr
-	mcr	p10, 0, r0, c\dr, c0, 4	@ fmsr	r0, s1
+	.org	1b + 8
+1:	mcr	p10, 0, r0, c\dr, c0, 4	@ fmsr	r0, s1
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 ENDPROC(vfp_put_float)
 
 ENTRY(vfp_get_double)
-	add	pc, pc, r0, lsl #3
-	mov	r0, r0
+	tbl_branch r0, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	fmrrd	r0, r1, d\dr
+1:	fmrrd	r0, r1, d\dr
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #ifdef CONFIG_VFPv3
 	@ d16 - d31 registers
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mrrc	p11, 3, r0, r1, c\dr	@ fmrrd	r0, r1, d\dr
+1:	mrrc	p11, 3, r0, r1, c\dr	@ fmrrd	r0, r1, d\dr
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #endif
 
@@ -253,17 +268,18 @@ ENTRY(vfp_get_double)
 ENDPROC(vfp_get_double)
 
 ENTRY(vfp_put_double)
-	add	pc, pc, r2, lsl #3
-	mov	r0, r0
+	tbl_branch r2, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	fmdrr	d\dr, r0, r1
+1:	fmdrr	d\dr, r0, r1
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #ifdef CONFIG_VFPv3
 	@ d16 - d31 registers
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mcrr	p11, 3, r1, r2, c\dr	@ fmdrr	r1, r2, d\dr
+1:	mcrr	p11, 3, r1, r2, c\dr	@ fmdrr	r1, r2, d\dr
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #endif
 ENDPROC(vfp_put_double)
-- 
GitLab


From 0e056f20f18d0efa5da920f3cf8532adc56d5779 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:58 +0100
Subject: [PATCH 064/257] Thumb-2: Implement the unified boot code

This patch adds the ARM/Thumb-2 unified support for the
arch/arm/boot/* files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/compressed/head.S | 167 +++++++++++++++++++-------------
 1 file changed, 99 insertions(+), 68 deletions(-)

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 82f5fcfd956..bd60e836987 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -140,7 +140,8 @@ start:
 		tst	r2, #3			@ not user?
 		bne	not_angel
 		mov	r0, #0x17		@ angel_SWIreason_EnterSVC
-		swi	0x123456		@ angel_SWI_ARM
+ ARM(		swi	0x123456	)	@ angel_SWI_ARM
+ THUMB(		svc	0xab		)	@ angel_SWI_THUMB
 not_angel:
 		mrs	r2, cpsr		@ turn off interrupts to
 		orr	r2, r2, #0xc0		@ prevent angel from running
@@ -161,7 +162,9 @@ not_angel:
 
 		.text
 		adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}
+ ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}	)
+ THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip}	)
+ THUMB(		ldr	sp, [r0, #28]				)
 		subs	r0, r0, r1		@ calculate the delta offset
 
 						@ if delta is zero, we are
@@ -263,22 +266,25 @@ not_relocated:	mov	r0, #0
  * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
  */
 		add	r1, r5, r0		@ end of decompressed kernel
 		adr	r2, reloc_start
 		ldr	r3, LC1
 		add	r3, r2, r3
-1:		ldmia	r2!, {r9 - r14}		@ copy relocation code
-		stmia	r1!, {r9 - r14}
-		ldmia	r2!, {r9 - r14}
-		stmia	r1!, {r9 - r14}
+1:		ldmia	r2!, {r9 - r12, r14}	@ copy relocation code
+		stmia	r1!, {r9 - r12, r14}
+		ldmia	r2!, {r9 - r12, r14}
+		stmia	r1!, {r9 - r12, r14}
 		cmp	r2, r3
 		blo	1b
-		add	sp, r1, #128		@ relocate the stack
+		mov	sp, r1
+		add	sp, sp, #128		@ relocate the stack
 
 		bl	cache_clean_flush
-		add	pc, r5, r0		@ call relocation code
+ ARM(		add	pc, r5, r0		) @ call relocation code
+ THUMB(		add	r12, r5, r0		)
+ THUMB(		mov	pc, r12			) @ call relocation code
 
 /*
  * We're not in danger of overwriting ourselves.  Do this the simple way.
@@ -499,6 +505,7 @@ __arm6_mmu_cache_on:
 		mov	pc, r12
 
 __common_mmu_cache_on:
+#ifndef CONFIG_THUMB2_KERNEL
 #ifndef DEBUG
 		orr	r0, r0, #0x000d		@ Write buffer, mmu
 #endif
@@ -510,6 +517,7 @@ __common_mmu_cache_on:
 1:		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back to
 		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
+#endif
 
 /*
  * All code following this line is relocatable.  It is relocated by
@@ -523,7 +531,7 @@ __common_mmu_cache_on:
  * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
  */
 		.align	5
 reloc_start:	add	r9, r5, r0
@@ -532,13 +540,14 @@ reloc_start:	add	r9, r5, r0
 		mov	r1, r4
 1:
 		.rept	4
-		ldmia	r5!, {r0, r2, r3, r10 - r14}	@ relocate kernel
-		stmia	r1!, {r0, r2, r3, r10 - r14}
+		ldmia	r5!, {r0, r2, r3, r10 - r12, r14}	@ relocate kernel
+		stmia	r1!, {r0, r2, r3, r10 - r12, r14}
 		.endr
 
 		cmp	r5, r9
 		blo	1b
-		add	sp, r1, #128		@ relocate the stack
+		mov	sp, r1
+		add	sp, sp, #128		@ relocate the stack
 		debug_reloc_end
 
 call_kernel:	bl	cache_clean_flush
@@ -572,7 +581,9 @@ call_cache_fn:	adr	r12, proc_types
 		ldr	r2, [r12, #4]		@ get mask
 		eor	r1, r1, r6		@ (real ^ match)
 		tst	r1, r2			@       & mask
-		addeq	pc, r12, r3		@ call cache function
+ ARM(		addeq	pc, r12, r3		) @ call cache function
+ THUMB(		addeq	r12, r3			)
+ THUMB(		moveq	pc, r12			) @ call cache function
 		add	r12, r12, #4*5
 		b	1b
 
@@ -595,9 +606,10 @@ call_cache_fn:	adr	r12, proc_types
 proc_types:
 		.word	0x41560600		@ ARM6/610
 		.word	0xffffffe0
-		b	__arm6_mmu_cache_off	@ works, but slow
-		b	__arm6_mmu_cache_off
+		W(b)	__arm6_mmu_cache_off	@ works, but slow
+		W(b)	__arm6_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 @		b	__arm6_mmu_cache_on		@ untested
 @		b	__arm6_mmu_cache_off
 @		b	__armv3_mmu_cache_flush
@@ -605,76 +617,84 @@ proc_types:
 		.word	0x00000000		@ old ARM ID
 		.word	0x0000f000
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41007000		@ ARM7/710
 		.word	0xfff8fe00
-		b	__arm7_mmu_cache_off
-		b	__arm7_mmu_cache_off
+		W(b)	__arm7_mmu_cache_off
+		W(b)	__arm7_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41807200		@ ARM720T (writethrough)
 		.word	0xffffff00
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41007400		@ ARM74x
 		.word	0xff00ff00
-		b	__armv3_mpu_cache_on
-		b	__armv3_mpu_cache_off
-		b	__armv3_mpu_cache_flush
+		W(b)	__armv3_mpu_cache_on
+		W(b)	__armv3_mpu_cache_off
+		W(b)	__armv3_mpu_cache_flush
 		
 		.word	0x41009400		@ ARM94x
 		.word	0xff00ff00
-		b	__armv4_mpu_cache_on
-		b	__armv4_mpu_cache_off
-		b	__armv4_mpu_cache_flush
+		W(b)	__armv4_mpu_cache_on
+		W(b)	__armv4_mpu_cache_off
+		W(b)	__armv4_mpu_cache_flush
 
 		.word	0x00007000		@ ARM7 IDs
 		.word	0x0000f000
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		@ Everything from here on will be the new ID system.
 
 		.word	0x4401a100		@ sa110 / sa1100
 		.word	0xffffffe0
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x6901b110		@ sa1110
 		.word	0xfffffff0
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56056930
 		.word	0xff0ffff0		@ PXA935
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56158000		@ PXA168
 		.word	0xfffff000
-		b __armv4_mmu_cache_on
-		b __armv4_mmu_cache_off
-		b __armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv5tej_mmu_cache_flush
 
 		.word	0x56056930
 		.word	0xff0ffff0		@ PXA935
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56050000		@ Feroceon
 		.word	0xff0f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv5tej_mmu_cache_flush
 
 #ifdef CONFIG_CPU_FEROCEON_OLD_ID
 		/* this conflicts with the standard ARMv5TE entry */
@@ -687,47 +707,50 @@ proc_types:
 
 		.word	0x66015261		@ FA526
 		.word	0xff01fff1
-		b	__fa526_cache_on
-		b	__armv4_mmu_cache_off
-		b	__fa526_cache_flush
+		W(b)	__fa526_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__fa526_cache_flush
 
 		@ These match on the architecture ID
 
 		.word	0x00020000		@ ARMv4T
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x00050000		@ ARMv5TE
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x00060000		@ ARMv5TEJ
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv6_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv6_mmu_cache_flush
 
 		.word	0x000f0000		@ new CPU Id
 		.word	0x000f0000
-		b	__armv7_mmu_cache_on
-		b	__armv7_mmu_cache_off
-		b	__armv7_mmu_cache_flush
+		W(b)	__armv7_mmu_cache_on
+		W(b)	__armv7_mmu_cache_off
+		W(b)	__armv7_mmu_cache_flush
 
 		.word	0			@ unrecognised type
 		.word	0
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.size	proc_types, . - proc_types
 
@@ -854,7 +877,7 @@ __armv7_mmu_cache_flush:
 		b	iflush
 hierarchical:
 		mcr	p15, 0, r10, c7, c10, 5	@ DMB
-		stmfd	sp!, {r0-r5, r7, r9, r11}
+		stmfd	sp!, {r0-r7, r9-r11}
 		mrc	p15, 1, r0, c0, c0, 1	@ read clidr
 		ands	r3, r0, #0x7000000	@ extract loc from clidr
 		mov	r3, r3, lsr #23		@ left align loc bit field
@@ -879,8 +902,12 @@ loop1:
 loop2:
 		mov	r9, r4			@ create working copy of max way size
 loop3:
-		orr	r11, r10, r9, lsl r5	@ factor way and cache number into r11
-		orr	r11, r11, r7, lsl r2	@ factor index number into r11
+ ARM(		orr	r11, r10, r9, lsl r5	) @ factor way and cache number into r11
+ ARM(		orr	r11, r11, r7, lsl r2	) @ factor index number into r11
+ THUMB(		lsl	r6, r9, r5		)
+ THUMB(		orr	r11, r10, r6		) @ factor way and cache number into r11
+ THUMB(		lsl	r6, r7, r2		)
+ THUMB(		orr	r11, r11, r6		) @ factor index number into r11
 		mcr	p15, 0, r11, c7, c14, 2	@ clean & invalidate by set/way
 		subs	r9, r9, #1		@ decrement the way
 		bge	loop3
@@ -891,7 +918,7 @@ skip:
 		cmp	r3, r10
 		bgt	loop1
 finished:
-		ldmfd	sp!, {r0-r5, r7, r9, r11}
+		ldmfd	sp!, {r0-r7, r9-r11}
 		mov	r10, #0			@ swith back to cache level 0
 		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
 iflush:
@@ -925,9 +952,13 @@ __armv4_mmu_cache_flush:
 		mov	r11, #8
 		mov	r11, r11, lsl r3	@ cache line size in bytes
 no_cache_id:
-		bic	r1, pc, #63		@ align to longest cache line
+		mov	r1, pc
+		bic	r1, r1, #63		@ align to longest cache line
 		add	r2, r1, r2
-1:		ldr	r3, [r1], r11		@ s/w flush D cache
+1:
+ ARM(		ldr	r3, [r1], r11		) @ s/w flush D cache
+ THUMB(		ldr     r3, [r1]		) @ s/w flush D cache
+ THUMB(		add     r1, r1, r11		)
 		teq	r1, r2
 		bne	1b
 
-- 
GitLab


From adca6dc23bc620ea95392659625200a252b97be3 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:59 +0100
Subject: [PATCH 065/257] Thumb-2: Add support for loadable modules

Modules compiled to Thumb-2 have two additional relocations needing to
be resolved at load time, R_ARM_THM_CALL and R_ARM_THM_JUMP24, for BL
and B.W instructions. The maximum Thumb-2 addressing range is +/-2^24
(+/-16MB) therefore the MODULES_VADDR macro in asm/memory.h is set to
(MODULES_END - 8MB) for the Thumb-2 compiled kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/elf.h    |  3 ++
 arch/arm/include/asm/memory.h |  6 ++++
 arch/arm/kernel/module.c      | 53 +++++++++++++++++++++++++++++++++++
 3 files changed, 62 insertions(+)

diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index c207504de84..c3b911ee915 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -55,6 +55,9 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_MOVW_ABS_NC	43
 #define R_ARM_MOVT_ABS		44
 
+#define R_ARM_THM_CALL		10
+#define R_ARM_THM_JUMP24	30
+
 /*
  * These are used to set parameters in the core dumps.
  */
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 85763db8744..376be1a6286 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -44,7 +44,13 @@
  * The module space lives between the addresses given by TASK_SIZE
  * and PAGE_OFFSET - it must be within 32MB of the kernel text.
  */
+#ifndef CONFIG_THUMB2_KERNEL
 #define MODULES_VADDR		(PAGE_OFFSET - 16*1024*1024)
+#else
+/* smaller range for Thumb-2 symbols relocation (2^24)*/
+#define MODULES_VADDR		(PAGE_OFFSET - 8*1024*1024)
+#endif
+
 #if TASK_SIZE > MODULES_VADDR
 #error Top of user space clashes with start of module space
 #endif
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index bac03c81489..f28c5e9c51e 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -102,6 +102,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		unsigned long loc;
 		Elf32_Sym *sym;
 		s32 offset;
+		u32 upper, lower, sign, j1, j2;
 
 		offset = ELF32_R_SYM(rel->r_info);
 		if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
@@ -184,6 +185,58 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 					(offset & 0x0fff);
 			break;
 
+		case R_ARM_THM_CALL:
+		case R_ARM_THM_JUMP24:
+			upper = *(u16 *)loc;
+			lower = *(u16 *)(loc + 2);
+
+			/*
+			 * 25 bit signed address range (Thumb-2 BL and B.W
+			 * instructions):
+			 *   S:I1:I2:imm10:imm11:0
+			 * where:
+			 *   S     = upper[10]   = offset[24]
+			 *   I1    = ~(J1 ^ S)   = offset[23]
+			 *   I2    = ~(J2 ^ S)   = offset[22]
+			 *   imm10 = upper[9:0]  = offset[21:12]
+			 *   imm11 = lower[10:0] = offset[11:1]
+			 *   J1    = lower[13]
+			 *   J2    = lower[11]
+			 */
+			sign = (upper >> 10) & 1;
+			j1 = (lower >> 13) & 1;
+			j2 = (lower >> 11) & 1;
+			offset = (sign << 24) | ((~(j1 ^ sign) & 1) << 23) |
+				((~(j2 ^ sign) & 1) << 22) |
+				((upper & 0x03ff) << 12) |
+				((lower & 0x07ff) << 1);
+			if (offset & 0x01000000)
+				offset -= 0x02000000;
+			offset += sym->st_value - loc;
+
+			/* only Thumb addresses allowed (no interworking) */
+			if (!(offset & 1) ||
+			    offset <= (s32)0xff000000 ||
+			    offset >= (s32)0x01000000) {
+				printk(KERN_ERR
+				       "%s: relocation out of range, section "
+				       "%d reloc %d sym '%s'\n", module->name,
+				       relindex, i, strtab + sym->st_name);
+				return -ENOEXEC;
+			}
+
+			sign = (offset >> 24) & 1;
+			j1 = sign ^ (~(offset >> 23) & 1);
+			j2 = sign ^ (~(offset >> 22) & 1);
+			*(u16 *)loc = (u16)((upper & 0xf800) | (sign << 10) |
+					    ((offset >> 12) & 0x03ff));
+			*(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
+						  (j1 << 13) | (j2 << 11) |
+						  ((offset >> 1) & 0x07ff));
+			upper = *(u16 *)loc;
+			lower = *(u16 *)(loc + 2);
+			break;
+
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
 			       module->name, ELF32_R_TYPE(rel->r_info));
-- 
GitLab


From dff2ab16ac53d2e21c1ee5ec72f446d5740d8ca2 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:33:00 +0100
Subject: [PATCH 066/257] Thumb-2: Pass a Thumb-2 address to the secondary CPUs
 to jump to

This patch sets bit 0 in the startup address passed to the secondary
CPUs so that they branch into Thumb-2 mode.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/platsmp.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index ac0e83f1cc3..a88458b4799 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -20,6 +20,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/localtimer.h>
+#include <asm/unified.h>
 
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
@@ -137,26 +138,19 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init poke_milo(void)
 {
-	extern void secondary_startup(void);
-
 	/* nobody is to be released from the pen yet */
 	pen_release = -1;
 
 	/*
-	 * write the address of secondary startup into the system-wide
-	 * flags register, then clear the bottom two bits, which is what
-	 * BootMonitor is waiting for
+	 * Write the address of secondary startup into the system-wide flags
+	 * register. The BootMonitor waits for this register to become
+	 * non-zero.
 	 */
-#if 1
 #define REALVIEW_SYS_FLAGSS_OFFSET 0x30
-	__raw_writel(virt_to_phys(realview_secondary_startup),
-		     __io_address(REALVIEW_SYS_BASE) +
-		     REALVIEW_SYS_FLAGSS_OFFSET);
 #define REALVIEW_SYS_FLAGSC_OFFSET 0x34
-	__raw_writel(3,
+	__raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
 		     __io_address(REALVIEW_SYS_BASE) +
-		     REALVIEW_SYS_FLAGSC_OFFSET);
-#endif
+		     REALVIEW_SYS_FLAGSS_OFFSET);
 
 	mb();
 }
-- 
GitLab


From e2ed3be7319f2734fcd9c7638888501934c22751 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:33:01 +0100
Subject: [PATCH 067/257] Thumb-2: Make the uImage entry an odd number

This allows U-Boot to branch to the kernel in Thumb-2 mode via
"mov pc, lr".

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/Makefile | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index da226abce2d..4a590f4113e 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -61,7 +61,7 @@ endif
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-		   -C none -a $(LOADADDR) -e $(LOADADDR) \
+		   -C none -a $(LOADADDR) -e $(STARTADDR) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
 ifeq ($(CONFIG_ZBOOT_ROM),y)
@@ -70,6 +70,13 @@ else
 $(obj)/uImage: LOADADDR=$(ZRELADDR)
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
+$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
+else
+$(obj)/uImage: STARTADDR=$(LOADADDR)
+endif
+
 $(obj)/uImage:	$(obj)/zImage FORCE
 	$(call if_changed,uimage)
 	@echo '  Image $@ is ready'
-- 
GitLab


From 16c79651a5ee1ad7e4fca65a7c5309dfca89ed28 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:33:02 +0100
Subject: [PATCH 068/257] Thumb-2: Add Thumb-2 support to the build files

This patch adds the necessary entries to the Makefile and Kconfig
files for building the Thumb-2 kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/Kconfig       | 12 ++++++++++++
 arch/arm/Kconfig.debug |  1 +
 arch/arm/Makefile      | 11 +++++++++--
 3 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index da28e7ba608..a36b5a8b123 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -983,6 +983,18 @@ config HZ
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100
 
+config THUMB2_KERNEL
+	bool "Compile the kernel in Thumb-2 mode"
+	depends on CPU_V7 && EXPERIMENTAL
+	select AEABI
+	select ARM_ASM_UNIFIED
+	help
+	  By enabling this option, the kernel will be compiled in
+	  Thumb-2 mode. A compiler/assembler that understand the unified
+	  ARM-Thumb syntax is needed.
+
+	  If unsure, say N.
+
 config ARM_ASM_UNIFIED
 	bool
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a89e4734b8f..1a6f70e5292 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -8,6 +8,7 @@ source "lib/Kconfig.debug"
 # n, but then RMK will have to kill you ;).
 config FRAME_POINTER
 	bool
+	depends on !THUMB2_KERNEL
 	default y if !ARM_UNWIND
 	help
 	  If you say N here, the resulting kernel will be slightly smaller and
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 3505572a21e..e150f232458 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -93,9 +93,16 @@ ifeq ($(CONFIG_ARM_UNWIND),y)
 CFLAGS_ABI	+=-funwind-tables
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
+CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+endif
+
 # Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 
-- 
GitLab


From 09529f7a1a010cc364267fc5895a71c3853eb82c Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:55 +0100
Subject: [PATCH 069/257] nommu: Fix the fault processing for the MMU-less case

The patch adds the necessary ifdefs around functions that only make
sense when the MMU is enabled.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/fault.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 6fdcbb70982..ee01ccae3f5 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -23,6 +23,7 @@
 
 #include "fault.h"
 
+#ifdef CONFIG_MMU
 
 #ifdef CONFIG_KPROBES
 static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
@@ -97,6 +98,10 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
 
 	printk("\n");
 }
+#else					/* CONFIG_MMU */
+void show_pte(struct mm_struct *mm, unsigned long addr)
+{ }
+#endif					/* CONFIG_MMU */
 
 /*
  * Oops.  The kernel tried to access some page that wasn't present.
@@ -171,6 +176,7 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		__do_kernel_fault(mm, addr, fsr, regs);
 }
 
+#ifdef CONFIG_MMU
 #define VM_FAULT_BADMAP		0x010000
 #define VM_FAULT_BADACCESS	0x020000
 
@@ -322,6 +328,13 @@ no_context:
 	__do_kernel_fault(mm, addr, fsr, regs);
 	return 0;
 }
+#else					/* CONFIG_MMU */
+static int
+do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	return 0;
+}
+#endif					/* CONFIG_MMU */
 
 /*
  * First Level Translation Fault Handler
@@ -340,6 +353,7 @@ no_context:
  * interrupt or a critical region, and should only copy the information
  * from the master page table, nothing more.
  */
+#ifdef CONFIG_MMU
 static int __kprobes
 do_translation_fault(unsigned long addr, unsigned int fsr,
 		     struct pt_regs *regs)
@@ -378,6 +392,14 @@ bad_area:
 	do_bad_area(addr, fsr, regs);
 	return 0;
 }
+#else					/* CONFIG_MMU */
+static int
+do_translation_fault(unsigned long addr, unsigned int fsr,
+		     struct pt_regs *regs)
+{
+	return 0;
+}
+#endif					/* CONFIG_MMU */
 
 /*
  * Some section permission faults need to be handled gracefully.
-- 
GitLab


From 9a45f026bb3ba720765d46f62f5c464d3317a8ab Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:56 +0100
Subject: [PATCH 070/257] nommu: Remove the context.id from asm-offsets.c when
 !MMU

There is no MMU context switching on MMU-less systems.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/mmu_context.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 263fed05ea3..bcdb9291ef0 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -62,8 +62,10 @@ static inline void check_context(struct mm_struct *mm)
 
 static inline void check_context(struct mm_struct *mm)
 {
+#ifdef CONFIG_MMU
 	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
 		__check_kvm_seq(mm);
+#endif
 }
 
 #define init_new_context(tsk,mm)	0
-- 
GitLab


From 365f7a43497dfdfdc05ca03896a8e22ee6944179 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:57 +0100
Subject: [PATCH 071/257] nommu: Add MMU-less support for Integrator platforms

This patch redefines the IO_ADDRESS macro in
include/asm-arm/hardware.h.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-integrator/include/mach/hardware.h |  4 ++++
 arch/arm/mach-integrator/integrator_cp.c         | 16 ++++++++--------
 2 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
index 1251319ef9a..d795642fad2 100644
--- a/arch/arm/mach-integrator/include/mach/hardware.h
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -36,8 +36,12 @@
 #define PCIO_BASE		PCI_IO_VADDR
 #define PCIMEM_BASE		PCI_MEMORY_VADDR
 
+#ifdef CONFIG_MMU
 /* macro to get at IO space when running virtually */
 #define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
+#else
+#define IO_ADDRESS(x) (x)
+#endif
 
 #define pcibios_assign_all_busses()	1
 
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4ac04055c2e..452931b2690 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -49,14 +49,14 @@
 
 #define INTCP_PA_CLCD_BASE		0xc0000000
 
-#define INTCP_VA_CIC_BASE		0xf1000040
-#define INTCP_VA_PIC_BASE		0xf1400000
-#define INTCP_VA_SIC_BASE		0xfca00000
+#define INTCP_VA_CIC_BASE		IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40
+#define INTCP_VA_PIC_BASE		IO_ADDRESS(INTEGRATOR_IC_BASE)
+#define INTCP_VA_SIC_BASE		IO_ADDRESS(0xca000000)
 
 #define INTCP_PA_ETH_BASE		0xc8000000
 #define INTCP_ETH_SIZE			0x10
 
-#define INTCP_VA_CTRL_BASE		0xfcb00000
+#define INTCP_VA_CTRL_BASE		IO_ADDRESS(0xcb000000)
 #define INTCP_FLASHPROG			0x04
 #define CINTEGRATOR_FLASHPROG_FLVPPEN	(1 << 0)
 #define CINTEGRATOR_FLASHPROG_FLWREN	(1 << 1)
@@ -121,12 +121,12 @@ static struct map_desc intcp_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= 0xfca00000,
+		.virtual	= IO_ADDRESS(0xca000000),
 		.pfn		= __phys_to_pfn(0xca000000),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= 0xfcb00000,
+		.virtual	= IO_ADDRESS(0xcb000000),
 		.pfn		= __phys_to_pfn(0xcb000000),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
@@ -394,8 +394,8 @@ static struct platform_device *intcp_devs[] __initdata = {
  */
 static unsigned int mmc_status(struct device *dev)
 {
-	unsigned int status = readl(0xfca00004);
-	writel(8, 0xfcb00008);
+	unsigned int status = readl(IO_ADDRESS(0xca000000) + 4);
+	writel(8, IO_ADDRESS(0xcb000000) + 8);
 
 	return status & 8;
 }
-- 
GitLab


From 5d57795e26c413656725c26bd053dbee3711adee Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:57 +0100
Subject: [PATCH 072/257] nommu: Add MMU-less support for the RealView boards

This patch defines the IO_ADDRESS macro for the !CONFIG_MMU case.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/include/mach/hardware.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
index b42c14f89ac..8a638d15797 100644
--- a/arch/arm/mach-realview/include/mach/hardware.h
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -25,6 +25,7 @@
 #include <asm/sizes.h>
 
 /* macro to get at IO space when running virtually */
+#ifdef CONFIG_MMU
 /*
  * Statically mapped addresses:
  *
@@ -33,6 +34,9 @@
  * 1fxx xxxx -> fexx xxxx
  */
 #define IO_ADDRESS(x)		(((x) & 0x03ffffff) + 0xfb000000)
+#else
+#define IO_ADDRESS(x)		(x)
+#endif
 #define __io_address(n)		__io(IO_ADDRESS(n))
 
 #endif
-- 
GitLab


From 68b7f7153fa58df710924fbb79722717d2d16094 Mon Sep 17 00:00:00 2001
From: Paul Brook <paul@codesourcery.com>
Date: Fri, 24 Jul 2009 12:34:58 +0100
Subject: [PATCH 073/257] nommu: ptrace support

The patch below adds ARM ptrace functions to get the process load address.
This is required for useful userspace debugging on mmuless systems.  These
values are obtained by reading magic offsets with PTRACE_PEEKUSR, as on other
nommu targets. I picked arbitrary large values for the offsets.

Signed-off-by: Paul Brook <paul@codesourcery.com>
---
 arch/arm/include/asm/ptrace.h | 8 ++++++++
 arch/arm/kernel/ptrace.c      | 8 +++++++-
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 67b833c9b6b..bbecccda76d 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -82,6 +82,14 @@
 #define PSR_ENDSTATE	0
 #endif
 
+/* 
+ * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
+ * process is located in memory.
+ */
+#define PT_TEXT_ADDR		0x10000
+#define PT_DATA_ADDR		0x10004
+#define PT_TEXT_END_ADDR	0x10008
+
 #ifndef __ASSEMBLY__
 
 /*
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 89882a1d018..a2ea3854cb3 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -521,7 +521,13 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
 		return -EIO;
 
 	tmp = 0;
-	if (off < sizeof(struct pt_regs))
+	if (off == PT_TEXT_ADDR)
+		tmp = tsk->mm->start_code;
+	else if (off == PT_DATA_ADDR)
+		tmp = tsk->mm->start_data;
+	else if (off == PT_TEXT_END_ADDR)
+		tmp = tsk->mm->end_code;
+	else if (off < sizeof(struct pt_regs))
 		tmp = get_user_reg(tsk, off >> 2);
 
 	return put_user(tmp, ret);
-- 
GitLab


From 05efde9d04ccc1d66a9d2225527c6ee638baa385 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:59 +0100
Subject: [PATCH 074/257] nommu: Do not override the CP15 control reg value
 returned from initfunc

The patch removes the "mrc" instruction in head-nommu.S overriding the
r0 register containing the value to be written in the CP15 system
control register.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/kernel/head-nommu.S | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index b16393d2b71..e5dfc2895e2 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -61,7 +61,10 @@ ENDPROC(stext)
  */
 __after_proc_init:
 #ifdef CONFIG_CPU_CP15
-	mrc	p15, 0, r0, c1, c0, 0		@ read control reg
+	/*
+	 * CP15 system control register value returned in r0 from
+	 * the CPU init function.
+	 */
 #ifdef CONFIG_ALIGNMENT_TRAP
 	orr	r0, r0, #CR_A
 #else
-- 
GitLab


From 3c4279750c7d3f88a0638a44e257d7d8d10732f2 Mon Sep 17 00:00:00 2001
From: "Hyok S. Choi" <hyok.choi@samsung.com>
Date: Fri, 24 Jul 2009 12:35:00 +0100
Subject: [PATCH 075/257] nommu: Enables to select noMMU mode

MMU option is now selectable.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
---
 arch/arm/Kconfig | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a36b5a8b123..dc70660fe6b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -46,10 +46,6 @@ config GENERIC_CLOCKEVENTS_BROADCAST
 	depends on GENERIC_CLOCKEVENTS
 	default y if SMP && !LOCAL_TIMERS
 
-config MMU
-	bool
-	default y
-
 config NO_IOPORT
 	bool
 
@@ -188,6 +184,13 @@ source "kernel/Kconfig.freezer"
 
 menu "System Type"
 
+config MMU
+	bool "MMU-based Paged Memory Management Support"
+	default y
+	help
+	  Select if you want MMU-based virtualised addressing space
+	  support by paged memory management. If unsure, say 'Y'.
+
 choice
 	prompt "ARM system type"
 	default ARCH_VERSATILE
-- 
GitLab


From 2732f4b6f11689fa08e2db5689fc652d608936b5 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:01 +0100
Subject: [PATCH 076/257] nommu: Remove the memory_start/end variables from ARM
 page-nommu.h

These variables do not seem to be used anywhere in the kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/page-nommu.h | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h
index 3574c0deb37..d1b162a18dc 100644
--- a/arch/arm/include/asm/page-nommu.h
+++ b/arch/arm/include/asm/page-nommu.h
@@ -43,7 +43,4 @@ typedef unsigned long pgprot_t;
 #define __pmd(x)        (x)
 #define __pgprot(x)     (x)
 
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
 #endif
-- 
GitLab


From ab6494f0c96f8953c7ad3e35301b2de2db3add57 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:02 +0100
Subject: [PATCH 077/257] nommu: Add noMMU support to the DMA API

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/dma-mapping.c | 94 ++++++++++++++++++++++++++++++---------
 1 file changed, 72 insertions(+), 22 deletions(-)

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 510c179b0ac..b30925fcbcd 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -36,7 +36,34 @@
 #define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
 #define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
 
+static u64 get_coherent_dma_mask(struct device *dev)
+{
+	u64 mask = ISA_DMA_THRESHOLD;
+
+	if (dev) {
+		mask = dev->coherent_dma_mask;
+
+		/*
+		 * Sanity check the DMA mask - it must be non-zero, and
+		 * must be able to be satisfied by a DMA allocation.
+		 */
+		if (mask == 0) {
+			dev_warn(dev, "coherent DMA mask is unset\n");
+			return 0;
+		}
+
+		if ((~mask) & ISA_DMA_THRESHOLD) {
+			dev_warn(dev, "coherent DMA mask %#llx is smaller "
+				 "than system GFP_DMA mask %#llx\n",
+				 mask, (unsigned long long)ISA_DMA_THRESHOLD);
+			return 0;
+		}
+	}
 
+	return mask;
+}
+
+#ifdef CONFIG_MMU
 /*
  * These are the page tables (2MB each) covering uncached, DMA consistent allocations
  */
@@ -152,7 +179,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	struct page *page;
 	struct arm_vm_region *c;
 	unsigned long order;
-	u64 mask = ISA_DMA_THRESHOLD, limit;
+	u64 mask = get_coherent_dma_mask(dev);
+	u64 limit;
 
 	if (!consistent_pte[0]) {
 		printk(KERN_ERR "%s: not initialised\n", __func__);
@@ -160,25 +188,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 		return NULL;
 	}
 
-	if (dev) {
-		mask = dev->coherent_dma_mask;
-
-		/*
-		 * Sanity check the DMA mask - it must be non-zero, and
-		 * must be able to be satisfied by a DMA allocation.
-		 */
-		if (mask == 0) {
-			dev_warn(dev, "coherent DMA mask is unset\n");
-			goto no_page;
-		}
-
-		if ((~mask) & ISA_DMA_THRESHOLD) {
-			dev_warn(dev, "coherent DMA mask %#llx is smaller "
-				 "than system GFP_DMA mask %#llx\n",
-				 mask, (unsigned long long)ISA_DMA_THRESHOLD);
-			goto no_page;
-		}
-	}
+	if (!mask)
+		goto no_page;
 
 	/*
 	 * Sanity check the allocation size.
@@ -267,6 +278,31 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	*handle = ~0;
 	return NULL;
 }
+#else	/* !CONFIG_MMU */
+static void *
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
+	    pgprot_t prot)
+{
+	void *virt;
+	u64 mask = get_coherent_dma_mask(dev);
+
+	if (!mask)
+		goto error;
+
+	if (mask != 0xffffffff)
+		gfp |= GFP_DMA;
+	virt = kmalloc(size, gfp);
+	if (!virt)
+		goto error;
+
+	*handle =  virt_to_dma(dev, virt);
+	return virt;
+
+error:
+	*handle = ~0;
+	return NULL;
+}
+#endif	/* CONFIG_MMU */
 
 /*
  * Allocate DMA-coherent memory space and return both the kernel remapped
@@ -311,9 +347,10 @@ EXPORT_SYMBOL(dma_alloc_writecombine);
 static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 		    void *cpu_addr, dma_addr_t dma_addr, size_t size)
 {
+	int ret = -ENXIO;
+#ifdef CONFIG_MMU
 	unsigned long flags, user_size, kern_size;
 	struct arm_vm_region *c;
-	int ret = -ENXIO;
 
 	user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 
@@ -334,6 +371,7 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 					      vma->vm_page_prot);
 		}
 	}
+#endif	/* CONFIG_MMU */
 
 	return ret;
 }
@@ -358,6 +396,7 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
  * free a page as defined by the above mapping.
  * Must not be called with IRQs disabled.
  */
+#ifdef CONFIG_MMU
 void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
 {
 	struct arm_vm_region *c;
@@ -444,6 +483,14 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
 	       __func__, cpu_addr);
 	dump_stack();
 }
+#else	/* !CONFIG_MMU */
+void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+{
+	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+		return;
+	kfree(cpu_addr);
+}
+#endif	/* CONFIG_MMU */
 EXPORT_SYMBOL(dma_free_coherent);
 
 /*
@@ -451,10 +498,12 @@ EXPORT_SYMBOL(dma_free_coherent);
  */
 static int __init consistent_init(void)
 {
+	int ret = 0;
+#ifdef CONFIG_MMU
 	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte;
-	int ret = 0, i = 0;
+	int i = 0;
 	u32 base = CONSISTENT_BASE;
 
 	do {
@@ -477,6 +526,7 @@ static int __init consistent_init(void)
 		consistent_pte[i++] = pte;
 		base += (1 << PGDIR_SHIFT);
 	} while (base < CONSISTENT_END);
+#endif	/* !CONFIG_MMU */
 
 	return ret;
 }
-- 
GitLab


From b32f3afe3c5c4ddd1c414d41845470a99c88475f Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:03 +0100
Subject: [PATCH 078/257] nommu: Include asm/setup.h in arch/arm/mm/nommu.c

This is needed for the struct meminfo definition.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/nommu.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index ad7bacc693b..900811cc913 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -12,6 +12,7 @@
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
 #include <asm/page.h>
+#include <asm/setup.h>
 #include <asm/mach/arch.h>
 
 #include "mm.h"
-- 
GitLab


From 8b79d5f217d7fc7d6b85ee5b10899f2bd20b64ed Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:04 +0100
Subject: [PATCH 079/257] nommu: Add #ifdef CONFIG_MMU around the PTE sanity
 checks

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/proc-macros.S | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 54b1f721dec..f1559c22778 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -77,6 +77,7 @@
  * Sanity check the PTE configuration for the code below - which makes
  * certain assumptions about how these bits are layed out.
  */
+#ifdef CONFIG_MMU
 #if L_PTE_SHARED != PTE_EXT_SHARED
 #error PTE shared bit mismatch
 #endif
@@ -90,6 +91,7 @@
      L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
 #error Invalid Linux PTE bit settings
 #endif
+#endif	/* CONFIG_MMU */
 
 /*
  * The ARMv6 and ARMv7 set_pte_ext translation function.
-- 
GitLab


From 0e0fe9219d2e5426d87a0f62db445010d4aba2c7 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:05 +0100
Subject: [PATCH 080/257] nommu: Do not allow REALVIEW_HIGH_PHYS_OFFSET if !MMU

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index d4cfa214538..dfc9b0bc6eb 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -75,7 +75,7 @@ config MACH_REALVIEW_PBX
 
 config REALVIEW_HIGH_PHYS_OFFSET
 	bool "High physical base address for the RealView platform"
-	depends on !MACH_REALVIEW_PB1176
+	depends on MMU && !MACH_REALVIEW_PB1176
 	default y
 	help
 	  RealView boards other than PB1176 have the RAM available at
-- 
GitLab


From 8bdca0ac2b1ec35091941c57b4202f7096291c5b Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:06 +0100
Subject: [PATCH 081/257] nommu: Fix compressed/head.S to not perform MMU
 specific operations

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/compressed/head.S | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index bd60e836987..fa6fbf45cf3 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -438,6 +438,7 @@ ENDPROC(__setup_mmu)
 
 __armv4_mmu_cache_on:
 		mov	r12, lr
+#ifdef CONFIG_MMU
 		bl	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
@@ -451,10 +452,12 @@ __armv4_mmu_cache_on:
 		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
+#endif
 		mov	pc, r12
 
 __armv7_mmu_cache_on:
 		mov	r12, lr
+#ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
 		tst	r11, #0xf		@ VMSA
 		blne	__setup_mmu
@@ -462,9 +465,11 @@ __armv7_mmu_cache_on:
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
 		tst	r11, #0xf		@ VMSA
 		mcrne	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
+#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+#ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
@@ -472,6 +477,7 @@ __armv7_mmu_cache_on:
 		movne	r1, #-1
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
+#endif
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back
 		mov	r0, #0
@@ -785,22 +791,30 @@ __armv3_mpu_cache_off:
 		mov	pc, lr
 
 __armv4_mmu_cache_off:
+#ifdef CONFIG_MMU
 		mrc	p15, 0, r0, c1, c0
 		bic	r0, r0, #0x000d
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c7	@ invalidate whole cache v4
 		mcr	p15, 0, r0, c8, c7	@ invalidate whole TLB v4
+#endif
 		mov	pc, lr
 
 __armv7_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
+#ifdef CONFIG_MMU
 		bic	r0, r0, #0x000d
+#else
+		bic	r0, r0, #0x000c
+#endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r12, lr
 		bl	__armv7_mmu_cache_flush
 		mov	r0, #0
+#ifdef CONFIG_MMU
 		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
+#endif
 		mcr	p15, 0, r0, c7, c5, 6	@ invalidate BTC
 		mcr	p15, 0, r0, c7, c10, 4	@ DSB
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
-- 
GitLab


From bdaaaec39792ee0035d6c5a5ad2520991e090a3c Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:06 +0100
Subject: [PATCH 082/257] nommu: Do not set PRRR and NMRR in proc-v7.S if !MMU

ARMv7-R profile CPUs do not have these registers.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/proc-v7.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index c19aecdb202..f3fa1c32fe9 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -234,7 +234,6 @@ __v7_setup:
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 	mov	r10, #0x1f			@ domains 0, 1 = manager
 	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
-#endif
 	/*
 	 * Memory region attributes with SCTLR.TRE=1
 	 *
@@ -267,6 +266,7 @@ __v7_setup:
 	ldr	r6, =0x40e040e0			@ NMRR
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
+#endif
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
 #ifdef CONFIG_CPU_ENDIAN_BE8
-- 
GitLab


From 412bb0a6224f96661c042a109c4978649c00ed52 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:37:09 +0100
Subject: [PATCH 083/257] Include linux/sched.h in arch/arm/mm/fault.c

When building with !MMU, task_struct is not defined. Just include the
relevant file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/fault.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index ee01ccae3f5..556c8daf087 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -16,6 +16,7 @@
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
 #include <linux/page-flags.h>
+#include <linux/sched.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
-- 
GitLab


From 4c8abb556b393b3ed73d72481ba27705294f6dc6 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 24 Jul 2009 12:16:57 +0100
Subject: [PATCH 084/257] ARM: 5622/1: at91: at91sam9g45 headers: DMA
 peripheral identifiers

It adds DMA peripheral identifiers for hardware handshaking interface. It will
be used in platform code.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/include/mach/at91sam9g45.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 2c42cf5f0c5..a526869aee3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -135,4 +135,21 @@
 
 #define CONSISTENT_DMA_SIZE	SZ_4M
 
+/*
+ * DMA peripheral identifiers
+ * for hardware handshaking interface
+ */
+#define AT_DMA_ID_MCI0		 0
+#define AT_DMA_ID_SPI0_TX	 1
+#define AT_DMA_ID_SPI0_RX	 2
+#define AT_DMA_ID_SPI1_TX	 3
+#define AT_DMA_ID_SPI1_RX	 4
+#define AT_DMA_ID_SSC0_TX	 5
+#define AT_DMA_ID_SSC0_RX	 6
+#define AT_DMA_ID_SSC1_TX	 7
+#define AT_DMA_ID_SSC1_RX	 8
+#define AT_DMA_ID_AC97_TX	 9
+#define AT_DMA_ID_AC97_RX	10
+#define AT_DMA_ID_MCI1		13
+
 #endif
-- 
GitLab


From a5b92cc348299c20be215b9f4b50853ecfbf3864 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Tue, 28 Jul 2009 18:57:10 +0530
Subject: [PATCH 085/257] ARM: OMAP4: Add McBSP support

This patch creates McBSP support on OMAP4430 development platform. This patch
includes corresponding base address changes for OMAP4.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
---
 arch/arm/mach-omap2/mcbsp.c             | 41 +++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/mcbsp.h |  8 ++++-
 arch/arm/plat-omap/mcbsp.c              |  2 +-
 3 files changed, 49 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f0435cd..d49dfb5e931 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -169,6 +169,42 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 #define OMAP34XX_MCBSP_PDATA_SZ		0
 #endif
 
+static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
+	{
+		.phys_base      = OMAP44XX_MCBSP1_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP1_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP1_TX,
+		.rx_irq         = INT_24XX_MCBSP1_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP1_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+	{
+		.phys_base      = OMAP44XX_MCBSP2_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP2_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP2_TX,
+		.rx_irq         = INT_24XX_MCBSP2_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP2_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+	{
+		.phys_base      = OMAP44XX_MCBSP3_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP3_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP3_TX,
+		.rx_irq         = INT_24XX_MCBSP3_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP3_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+	{
+		.phys_base      = OMAP44XX_MCBSP4_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP4_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP4_TX,
+		.rx_irq         = INT_24XX_MCBSP4_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP4_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+};
+#define OMAP44XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap44xx_mcbsp_pdata)
+
 static int __init omap2_mcbsp_init(void)
 {
 	if (cpu_is_omap2420())
@@ -177,6 +213,8 @@ static int __init omap2_mcbsp_init(void)
 		omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ;
 	if (cpu_is_omap34xx())
 		omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
+	if (cpu_is_omap44xx())
+		omap_mcbsp_count = OMAP44XX_MCBSP_PDATA_SZ;
 
 	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
 								GFP_KERNEL);
@@ -192,6 +230,9 @@ static int __init omap2_mcbsp_init(void)
 	if (cpu_is_omap34xx())
 		omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
 						OMAP34XX_MCBSP_PDATA_SZ);
+	if (cpu_is_omap44xx())
+		omap_mcbsp_register_board_cfg(omap44xx_mcbsp_pdata,
+						OMAP44XX_MCBSP_PDATA_SZ);
 
 	return omap_mcbsp_init();
 }
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index bb154ea7676..ec6f81e06d3 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -53,6 +53,11 @@
 #define OMAP34XX_MCBSP4_BASE	0x49026000
 #define OMAP34XX_MCBSP5_BASE	0x48096000
 
+#define OMAP44XX_MCBSP1_BASE	0x49022000
+#define OMAP44XX_MCBSP2_BASE	0x49024000
+#define OMAP44XX_MCBSP3_BASE	0x49026000
+#define OMAP44XX_MCBSP4_BASE	0x48074000
+
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
@@ -98,7 +103,8 @@
 #define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
 #define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
 
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+	defined(CONFIG_ARCH_OMAP4)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
 #define OMAP_MCBSP_REG_DRR1	0x04
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index efa0e0111f3..e42fa7cfc79 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -191,7 +191,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 	OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
 	OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
 	OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr);
 		OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr);
 	}
-- 
GitLab


From 085b54d99b8ee999e7905b8f16e201e0da8ba369 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Tue, 28 Jul 2009 18:57:22 +0530
Subject: [PATCH 086/257] ARM: OMAP4: Add UART4 support

This patch adds UART4 support on OMAP4430 development platform.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
---
 arch/arm/mach-omap2/board-4430sdp.c |  2 +-
 arch/arm/mach-omap2/serial.c        | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 57e477bd89c..7e1e721f032 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -39,7 +39,7 @@ static struct platform_device *sdp4430_devices[] __initdata = {
 };
 
 static struct omap_uart_config sdp4430_uart_config __initdata = {
-	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2),
+	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
 };
 
 static struct omap_lcd_config sdp4430_lcd_config __initdata = {
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b094c15bfe4..c0bea75f13f 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -97,6 +97,16 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+#ifdef CONFIG_ARCH_OMAP4
+		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.mapbase	= OMAP_UART4_BASE,
+		.irq		= 70,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
+	}, {
+#endif
 		.flags		= 0
 	}
 };
-- 
GitLab


From 78a1a6d3411de1a8b0dc1cb92754b5f12f251912 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Tue, 28 Jul 2009 18:57:30 +0530
Subject: [PATCH 087/257] ARM: OMAP4: Update the GPIO support

This patch adds GPIO support on OMAP4430 development platform.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
---
 arch/arm/plat-omap/gpio.c | 249 ++++++++++++++++++++++++++++++--------
 1 file changed, 198 insertions(+), 51 deletions(-)

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 26b387c1242..f0b71680ec5 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -138,6 +138,32 @@
 #define OMAP24XX_GPIO_CLEARDATAOUT	0x0090
 #define OMAP24XX_GPIO_SETDATAOUT	0x0094
 
+#define OMAP4_GPIO_REVISION		0x0000
+#define OMAP4_GPIO_SYSCONFIG		0x0010
+#define OMAP4_GPIO_EOI			0x0020
+#define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
+#define OMAP4_GPIO_IRQSTATUSRAW1	0x0028
+#define OMAP4_GPIO_IRQSTATUS0		0x002c
+#define OMAP4_GPIO_IRQSTATUS1		0x0030
+#define OMAP4_GPIO_IRQSTATUSSET0	0x0034
+#define OMAP4_GPIO_IRQSTATUSSET1	0x0038
+#define OMAP4_GPIO_IRQSTATUSCLR0	0x003c
+#define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
+#define OMAP4_GPIO_IRQWAKEN0		0x0044
+#define OMAP4_GPIO_IRQWAKEN1		0x0048
+#define OMAP4_GPIO_SYSSTATUS		0x0104
+#define OMAP4_GPIO_CTRL			0x0130
+#define OMAP4_GPIO_OE			0x0134
+#define OMAP4_GPIO_DATAIN		0x0138
+#define OMAP4_GPIO_DATAOUT		0x013c
+#define OMAP4_GPIO_LEVELDETECT0		0x0140
+#define OMAP4_GPIO_LEVELDETECT1		0x0144
+#define OMAP4_GPIO_RISINGDETECT		0x0148
+#define OMAP4_GPIO_FALLINGDETECT	0x014c
+#define OMAP4_GPIO_DEBOUNCENABLE	0x0150
+#define OMAP4_GPIO_DEBOUNCINGTIME	0x0154
+#define OMAP4_GPIO_CLEARDATAOUT		0x0190
+#define OMAP4_GPIO_SETDATAOUT		0x0194
 /*
  * omap34xx specific GPIO registers
  */
@@ -386,11 +412,15 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP850_GPIO_DIR_CONTROL;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_OE;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -459,8 +489,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -468,6 +497,15 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			reg += OMAP24XX_GPIO_CLEARDATAOUT;
 		l = 1 << gpio;
 		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP4_GPIO_SETDATAOUT;
+		else
+			reg += OMAP4_GPIO_CLEARDATAOUT;
+		l = 1 << gpio;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -511,11 +549,15 @@ static int __omap_get_gpio_datain(int gpio)
 		reg += OMAP850_GPIO_DATA_INPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
 		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_DATAIN;
+		break;
 #endif
 	default:
 		return -EINVAL;
@@ -544,7 +586,11 @@ void omap_set_gpio_debounce(int gpio, int enable)
 
 	bank = get_gpio_bank(gpio);
 	reg = bank->base;
+#ifdef CONFIG_ARCH_OMAP4
+	reg += OMAP4_GPIO_DEBOUNCENABLE;
+#else
 	reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+#endif
 
 	spin_lock_irqsave(&bank->lock, flags);
 	val = __raw_readl(reg);
@@ -581,7 +627,11 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
 	reg = bank->base;
 
 	enc_time &= 0xff;
+#ifdef CONFIG_ARCH_OMAP4
+	reg += OMAP4_GPIO_DEBOUNCINGTIME;
+#else
 	reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+#endif
 	__raw_writel(enc_time, reg);
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce_time);
@@ -593,23 +643,46 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 {
 	void __iomem *base = bank->base;
 	u32 gpio_bit = 1 << gpio;
+	u32 val;
 
-	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-		trigger & IRQ_TYPE_LEVEL_LOW);
-	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-		trigger & IRQ_TYPE_LEVEL_HIGH);
-	MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-		trigger & IRQ_TYPE_EDGE_RISING);
-	MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-		trigger & IRQ_TYPE_EDGE_FALLING);
-
+	if (cpu_is_omap44xx()) {
+		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_LOW);
+		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_HIGH);
+		MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_RISING);
+		MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_FALLING);
+	} else {
+		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_LOW);
+		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_HIGH);
+		MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_RISING);
+		MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_FALLING);
+	}
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
-		if (trigger != 0)
-			__raw_writel(1 << gpio, bank->base
+		if (cpu_is_omap44xx()) {
+			if (trigger != 0)
+				__raw_writel(1 << gpio, bank->base+
+						OMAP4_GPIO_IRQWAKEN0);
+			else {
+				val = __raw_readl(bank->base +
+							OMAP4_GPIO_IRQWAKEN0);
+				__raw_writel(val & (~(1 << gpio)), bank->base +
+							 OMAP4_GPIO_IRQWAKEN0);
+			}
+		} else {
+			if (trigger != 0)
+				__raw_writel(1 << gpio, bank->base
 					+ OMAP24XX_GPIO_SETWKUENA);
-		else
-			__raw_writel(1 << gpio, bank->base
+			else
+				__raw_writel(1 << gpio, bank->base
 					+ OMAP24XX_GPIO_CLEARWKUENA);
+		}
 	} else {
 		if (trigger != 0)
 			bank->enabled_non_wakeup_gpios |= gpio_bit;
@@ -617,9 +690,15 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
 	}
 
-	bank->level_mask =
-		__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
-		__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+	if (cpu_is_omap44xx()) {
+		bank->level_mask =
+			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
+			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
+	} else {
+		bank->level_mask =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+	}
 }
 #endif
 
@@ -783,11 +862,15 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP850_GPIO_INT_STATUS;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
 		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_IRQSTATUS0;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -798,12 +881,16 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	/* Workaround for clearing DSP GPIO interrupts to allow retention */
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
+#endif
+	if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		__raw_writel(gpio_mask, reg);
 
 	/* Flush posted write for the irq status to avoid spurious interrupts */
 	__raw_readl(reg);
-#endif
+	}
 }
 
 static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
@@ -853,12 +940,17 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
 		mask = 0xffffffff;
 		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_IRQSTATUSSET0;
+		mask = 0xffffffff;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -927,8 +1019,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-		defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -936,6 +1027,15 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
 		l = gpio_mask;
 		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP4_GPIO_IRQSTATUSSET0;
+		else
+			reg += OMAP4_GPIO_IRQSTATUSCLR0;
+		l = gpio_mask;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -1112,10 +1212,13 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_850)
 		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	if (bank->method == METHOD_GPIO_24XX)
+		isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
 #endif
 	while(1) {
 		u32 isr_saved, level_mask = 0;
@@ -1547,7 +1650,7 @@ static int __init _omap_gpio_init(void)
 
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_44xx;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
 		printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
 			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
@@ -1581,7 +1684,16 @@ static int __init _omap_gpio_init(void)
 			static const u32 non_wakeup_gpios[] = {
 				0xe203ffc0, 0x08700040
 			};
-
+		if (cpu_is_omap44xx()) {
+			__raw_writel(0xffffffff, bank->base +
+						OMAP4_GPIO_IRQSTATUSCLR0);
+			__raw_writew(0x0015, bank->base +
+						OMAP4_GPIO_SYSCONFIG);
+			__raw_writel(0x00000000, bank->base +
+						 OMAP4_GPIO_DEBOUNCENABLE);
+			/* Initialize interface clock ungated, module enabled */
+			__raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+		} else {
 			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
 			__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
 			__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
@@ -1589,12 +1701,12 @@ static int __init _omap_gpio_init(void)
 
 			/* Initialize interface clock ungated, module enabled */
 			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
+		}
 			if (i < ARRAY_SIZE(non_wakeup_gpios))
 				bank->non_wakeup_gpios = non_wakeup_gpios[i];
 			gpio_count = 32;
 		}
 #endif
-
 		/* REVISIT eventually switch from OMAP-specific gpio structs
 		 * over to the generic ones
 		 */
@@ -1680,13 +1792,19 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		case METHOD_GPIO_24XX:
 			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
 			break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		case METHOD_GPIO_24XX:
+			wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			break;
 #endif
 		default:
 			continue;
@@ -1722,12 +1840,17 @@ static int omap_gpio_resume(struct sys_device *dev)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		case METHOD_GPIO_24XX:
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
 			break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		case METHOD_GPIO_24XX:
+			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			break;
 #endif
 		default:
 			continue;
@@ -1772,20 +1895,28 @@ void omap2_gpio_prepare_for_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 		l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		bank->saved_datain = __raw_readl(bank->base +
+							OMAP4_GPIO_DATAIN);
+		l1 = __raw_readl(bank->base + OMAP4_GPIO_FALLINGDETECT);
+		l2 = __raw_readl(bank->base + OMAP4_GPIO_RISINGDETECT);
 #endif
 		bank->saved_fallingdetect = l1;
 		bank->saved_risingdetect = l2;
 		l1 &= ~bank->enabled_non_wakeup_gpios;
 		l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		__raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
+		__raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
 #endif
 		c++;
 	}
@@ -1808,33 +1939,49 @@ void omap2_gpio_resume_after_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		__raw_writel(bank->saved_fallingdetect,
 				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(bank->saved_risingdetect,
 				 bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		__raw_writel(bank->saved_fallingdetect,
+				 bank->base + OMAP4_GPIO_FALLINGDETECT);
+		__raw_writel(bank->saved_risingdetect,
+				 bank->base + OMAP4_GPIO_RISINGDETECT);
+		l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
 #endif
 		/* Check if any of the non-wakeup interrupt GPIOs have changed
 		 * state.  If so, generate an IRQ by software.  This is
 		 * horribly racy, but it's the best we can do to work around
 		 * this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
-		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-#endif
 		l ^= bank->saved_datain;
 		l &= bank->non_wakeup_gpios;
 		if (l) {
 			u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			__raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			__raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+			old0 = __raw_readl(bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+			old1 = __raw_readl(bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
+			__raw_writel(old0 | l, bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+			__raw_writel(old1 | l, bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
+			__raw_writel(old0, bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+			__raw_writel(old1, bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
 #endif
 		}
 	}
-- 
GitLab


From ef12379f205bed7e92434e12ddd44e62d13bebe1 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 29 Jul 2009 22:41:06 +0100
Subject: [PATCH 088/257] ARM: 5628/1: ep93xx: Introduce Pulse Width Modulator
 (PWM) driver

The EP93xx features two PWMs (one on the EP9307) with the following
features:

  * Configurable dual output
  * Separate input clocks for each PWM output
  * 16-bit resolution
  * Programmable pulse width (duty cycle), interval (frequency), and
    polarity

This adds the necessary core support as well as the driver.  A sysfs
interface is provided to control the PWM outputs.

Signed-off-by: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c                  |   4 +
 arch/arm/mach-ep93xx/core.c                   |  85 ++++
 .../mach-ep93xx/include/mach/ep93xx-regs.h    |   1 +
 arch/arm/mach-ep93xx/include/mach/platform.h  |   4 +
 drivers/misc/Kconfig                          |  13 +
 drivers/misc/Makefile                         |   1 +
 drivers/misc/ep93xx_pwm.c                     | 384 ++++++++++++++++++
 7 files changed, 492 insertions(+)
 create mode 100644 drivers/misc/ep93xx_pwm.c

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index b6b53447b1b..3dd0e2a2309 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -72,6 +72,9 @@ static struct clk clk_keypad = {
 	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
 	.set_rate	= set_keytchclk_rate,
 };
+static struct clk clk_pwm = {
+	.rate		= EP93XX_EXT_CLK_RATE,
+};
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
@@ -137,6 +140,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
 	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
+	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
 	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
 	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
 	INIT_CK(NULL,			"m2p2",		&clk_m2p2),
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 2b58df0184c..40755298fa3 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -597,6 +597,91 @@ static struct platform_device ep93xx_leds = {
 };
 
 
+/*************************************************************************
+ * EP93xx pwm peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_pwm0_resource[] = {
+	{
+		.start	= EP93XX_PWM_PHYS_BASE,
+		.end	= EP93XX_PWM_PHYS_BASE + 0x10 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_pwm0_device = {
+	.name		= "ep93xx-pwm",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(ep93xx_pwm0_resource),
+	.resource	= ep93xx_pwm0_resource,
+};
+
+static struct resource ep93xx_pwm1_resource[] = {
+	{
+		.start	= EP93XX_PWM_PHYS_BASE + 0x20,
+		.end	= EP93XX_PWM_PHYS_BASE + 0x30 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_pwm1_device = {
+	.name		= "ep93xx-pwm",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(ep93xx_pwm1_resource),
+	.resource	= ep93xx_pwm1_resource,
+};
+
+void __init ep93xx_register_pwm(int pwm0, int pwm1)
+{
+	if (pwm0)
+		platform_device_register(&ep93xx_pwm0_device);
+
+	/* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
+	if (pwm1)
+		platform_device_register(&ep93xx_pwm1_device);
+}
+
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
+{
+	int err;
+
+	if (pdev->id == 0) {
+		err = 0;
+	} else if (pdev->id == 1) {
+		err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
+				   dev_name(&pdev->dev));
+		if (err)
+			return err;
+		err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
+		if (err)
+			goto fail;
+
+		/* PWM 1 output on EGPIO[14] */
+		ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
+	} else {
+		err = -ENODEV;
+	}
+
+	return err;
+
+fail:
+	gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+	return err;
+}
+EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
+
+void ep93xx_pwm_release_gpio(struct platform_device *pdev)
+{
+	if (pdev->id == 1) {
+		gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
+		gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+
+		/* EGPIO[14] used for GPIO */
+		ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
+	}
+}
+EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
+
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index a11ae779baa..ea78e908fc8 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -147,6 +147,7 @@
 #define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
 #define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
+#define EP93XX_PWM_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00110000)
 #define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
 #define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 0af0a3ba704..5f5fa6574d3 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -5,6 +5,7 @@
 #ifndef __ASSEMBLY__
 
 struct i2c_board_info;
+struct platform_device;
 
 struct ep93xx_eth_data
 {
@@ -32,6 +33,9 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_pwm(int pwm0, int pwm1);
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
+void ep93xx_pwm_release_gpio(struct platform_device *pdev);
 
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 68ab39d7cb3..df1f86b5c83 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -233,6 +233,19 @@ config ISL29003
 	  This driver can also be built as a module.  If so, the module
 	  will be called isl29003.
 
+config EP93XX_PWM
+	tristate "EP93xx PWM support"
+	depends on ARCH_EP93XX
+	help
+	  This option enables device driver support for the PWM channels
+	  on the Cirrus EP93xx processors.  The EP9307 chip only has one
+	  PWM channel all the others have two, the second channel is an
+	  alternate function of the EGPIO14 pin.  A sysfs interface is
+	  provided to control the PWM channels.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called ep93xx_pwm.
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 36f733cd60e..f982d2ecfde 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_SGI_XP)		+= sgi-xp/
 obj-$(CONFIG_SGI_GRU)		+= sgi-gru/
 obj-$(CONFIG_HP_ILO)		+= hpilo.o
 obj-$(CONFIG_ISL29003)		+= isl29003.o
+obj-$(CONFIG_EP93XX_PWM)	+= ep93xx_pwm.o
 obj-$(CONFIG_C2PORT)		+= c2port/
 obj-y				+= eeprom/
 obj-y				+= cb710/
diff --git a/drivers/misc/ep93xx_pwm.c b/drivers/misc/ep93xx_pwm.c
new file mode 100644
index 00000000000..ba4694169d7
--- /dev/null
+++ b/drivers/misc/ep93xx_pwm.c
@@ -0,0 +1,384 @@
+/*
+ *  Simple PWM driver for EP93XX
+ *
+ *	(c) Copyright 2009  Matthieu Crapet <mcrapet@gmail.com>
+ *	(c) Copyright 2009  H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ *
+ *  EP9307 has only one channel:
+ *    - PWMOUT
+ *
+ *  EP9301/02/12/15 have two channels:
+ *    - PWMOUT
+ *    - PWMOUT1 (alternate function for EGPIO14)
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/platform.h>
+
+#define EP93XX_PWMx_TERM_COUNT	0x00
+#define EP93XX_PWMx_DUTY_CYCLE	0x04
+#define EP93XX_PWMx_ENABLE	0x08
+#define EP93XX_PWMx_INVERT	0x0C
+
+#define EP93XX_PWM_MAX_COUNT	0xFFFF
+
+struct ep93xx_pwm {
+	void __iomem	*mmio_base;
+	struct clk	*clk;
+	u32		duty_percent;
+};
+
+static inline void ep93xx_pwm_writel(struct ep93xx_pwm *pwm,
+		unsigned int val, unsigned int off)
+{
+	__raw_writel(val, pwm->mmio_base + off);
+}
+
+static inline unsigned int ep93xx_pwm_readl(struct ep93xx_pwm *pwm,
+		unsigned int off)
+{
+	return __raw_readl(pwm->mmio_base + off);
+}
+
+static inline void ep93xx_pwm_write_tc(struct ep93xx_pwm *pwm, u16 value)
+{
+	ep93xx_pwm_writel(pwm, value, EP93XX_PWMx_TERM_COUNT);
+}
+
+static inline u16 ep93xx_pwm_read_tc(struct ep93xx_pwm *pwm)
+{
+	return ep93xx_pwm_readl(pwm, EP93XX_PWMx_TERM_COUNT);
+}
+
+static inline void ep93xx_pwm_write_dc(struct ep93xx_pwm *pwm, u16 value)
+{
+	ep93xx_pwm_writel(pwm, value, EP93XX_PWMx_DUTY_CYCLE);
+}
+
+static inline void ep93xx_pwm_enable(struct ep93xx_pwm *pwm)
+{
+	ep93xx_pwm_writel(pwm, 0x1, EP93XX_PWMx_ENABLE);
+}
+
+static inline void ep93xx_pwm_disable(struct ep93xx_pwm *pwm)
+{
+	ep93xx_pwm_writel(pwm, 0x0, EP93XX_PWMx_ENABLE);
+}
+
+static inline int ep93xx_pwm_is_enabled(struct ep93xx_pwm *pwm)
+{
+	return ep93xx_pwm_readl(pwm, EP93XX_PWMx_ENABLE) & 0x1;
+}
+
+static inline void ep93xx_pwm_invert(struct ep93xx_pwm *pwm)
+{
+	ep93xx_pwm_writel(pwm, 0x1, EP93XX_PWMx_INVERT);
+}
+
+static inline void ep93xx_pwm_normal(struct ep93xx_pwm *pwm)
+{
+	ep93xx_pwm_writel(pwm, 0x0, EP93XX_PWMx_INVERT);
+}
+
+static inline int ep93xx_pwm_is_inverted(struct ep93xx_pwm *pwm)
+{
+	return ep93xx_pwm_readl(pwm, EP93XX_PWMx_INVERT) & 0x1;
+}
+
+/*
+ * /sys/devices/platform/ep93xx-pwm.N
+ *   /min_freq      read-only   minimum pwm output frequency
+ *   /max_req       read-only   maximum pwm output frequency
+ *   /freq          read-write  pwm output frequency (0 = disable output)
+ *   /duty_percent  read-write  pwm duty cycle percent (1..99)
+ *   /invert        read-write  invert pwm output
+ */
+
+static ssize_t ep93xx_pwm_get_min_freq(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+	unsigned long rate = clk_get_rate(pwm->clk);
+
+	return sprintf(buf, "%ld\n", rate / (EP93XX_PWM_MAX_COUNT + 1));
+}
+
+static ssize_t ep93xx_pwm_get_max_freq(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+	unsigned long rate = clk_get_rate(pwm->clk);
+
+	return sprintf(buf, "%ld\n", rate / 2);
+}
+
+static ssize_t ep93xx_pwm_get_freq(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+
+	if (ep93xx_pwm_is_enabled(pwm)) {
+		unsigned long rate = clk_get_rate(pwm->clk);
+		u16 term = ep93xx_pwm_read_tc(pwm);
+
+		return sprintf(buf, "%ld\n", rate / (term + 1));
+	} else {
+		return sprintf(buf, "disabled\n");
+	}
+}
+
+static ssize_t ep93xx_pwm_set_freq(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+	long val;
+	int err;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return -EINVAL;
+
+	if (val == 0) {
+		ep93xx_pwm_disable(pwm);
+	} else if (val <= (clk_get_rate(pwm->clk) / 2)) {
+		u32 term, duty;
+
+		val = (clk_get_rate(pwm->clk) / val) - 1;
+		if (val > EP93XX_PWM_MAX_COUNT)
+			val = EP93XX_PWM_MAX_COUNT;
+		if (val < 1)
+			val = 1;
+
+		term = ep93xx_pwm_read_tc(pwm);
+		duty = ((val + 1) * pwm->duty_percent / 100) - 1;
+
+		/* If pwm is running, order is important */
+		if (val > term) {
+			ep93xx_pwm_write_tc(pwm, val);
+			ep93xx_pwm_write_dc(pwm, duty);
+		} else {
+			ep93xx_pwm_write_dc(pwm, duty);
+			ep93xx_pwm_write_tc(pwm, val);
+		}
+
+		if (!ep93xx_pwm_is_enabled(pwm))
+			ep93xx_pwm_enable(pwm);
+	} else {
+		return -EINVAL;
+	}
+
+	return count;
+}
+
+static ssize_t ep93xx_pwm_get_duty_percent(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+
+	return sprintf(buf, "%d\n", pwm->duty_percent);
+}
+
+static ssize_t ep93xx_pwm_set_duty_percent(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+	long val;
+	int err;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return -EINVAL;
+
+	if (val > 0 && val < 100) {
+		u32 term = ep93xx_pwm_read_tc(pwm);
+		ep93xx_pwm_write_dc(pwm, ((term + 1) * val / 100) - 1);
+		pwm->duty_percent = val;
+		return count;
+	}
+
+	return -EINVAL;
+}
+
+static ssize_t ep93xx_pwm_get_invert(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+
+	return sprintf(buf, "%d\n", ep93xx_pwm_is_inverted(pwm));
+}
+
+static ssize_t ep93xx_pwm_set_invert(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+	long val;
+	int err;
+
+	err = strict_strtol(buf, 10, &val);
+	if (err)
+		return -EINVAL;
+
+	if (val == 0)
+		ep93xx_pwm_normal(pwm);
+	else if (val == 1)
+		ep93xx_pwm_invert(pwm);
+	else
+		return -EINVAL;
+
+	return count;
+}
+
+static DEVICE_ATTR(min_freq, S_IRUGO, ep93xx_pwm_get_min_freq, NULL);
+static DEVICE_ATTR(max_freq, S_IRUGO, ep93xx_pwm_get_max_freq, NULL);
+static DEVICE_ATTR(freq, S_IWUGO | S_IRUGO,
+		   ep93xx_pwm_get_freq, ep93xx_pwm_set_freq);
+static DEVICE_ATTR(duty_percent, S_IWUGO | S_IRUGO,
+		   ep93xx_pwm_get_duty_percent, ep93xx_pwm_set_duty_percent);
+static DEVICE_ATTR(invert, S_IWUGO | S_IRUGO,
+		   ep93xx_pwm_get_invert, ep93xx_pwm_set_invert);
+
+static struct attribute *ep93xx_pwm_attrs[] = {
+	&dev_attr_min_freq.attr,
+	&dev_attr_max_freq.attr,
+	&dev_attr_freq.attr,
+	&dev_attr_duty_percent.attr,
+	&dev_attr_invert.attr,
+	NULL
+};
+
+static const struct attribute_group ep93xx_pwm_sysfs_files = {
+	.attrs	= ep93xx_pwm_attrs,
+};
+
+static int __init ep93xx_pwm_probe(struct platform_device *pdev)
+{
+	struct ep93xx_pwm *pwm;
+	struct resource *res;
+	int err;
+
+	err = ep93xx_pwm_acquire_gpio(pdev);
+	if (err)
+		return err;
+
+	pwm = kzalloc(sizeof(struct ep93xx_pwm), GFP_KERNEL);
+	if (!pwm) {
+		err = -ENOMEM;
+		goto fail_no_mem;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		err = -ENXIO;
+		goto fail_no_mem_resource;
+	}
+
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (res == NULL) {
+		err = -EBUSY;
+		goto fail_no_mem_resource;
+	}
+
+	pwm->mmio_base = ioremap(res->start, resource_size(res));
+	if (pwm->mmio_base == NULL) {
+		err = -ENXIO;
+		goto fail_no_ioremap;
+	}
+
+	err = sysfs_create_group(&pdev->dev.kobj, &ep93xx_pwm_sysfs_files);
+	if (err)
+		goto fail_no_sysfs;
+
+	pwm->clk = clk_get(&pdev->dev, "pwm_clk");
+	if (IS_ERR(pwm->clk)) {
+		err = PTR_ERR(pwm->clk);
+		goto fail_no_clk;
+	}
+
+	pwm->duty_percent = 50;
+
+	platform_set_drvdata(pdev, pwm);
+
+	/* disable pwm at startup. Avoids zero value. */
+	ep93xx_pwm_disable(pwm);
+	ep93xx_pwm_write_tc(pwm, EP93XX_PWM_MAX_COUNT);
+	ep93xx_pwm_write_dc(pwm, EP93XX_PWM_MAX_COUNT / 2);
+
+	clk_enable(pwm->clk);
+
+	return 0;
+
+fail_no_clk:
+	sysfs_remove_group(&pdev->dev.kobj, &ep93xx_pwm_sysfs_files);
+fail_no_sysfs:
+	iounmap(pwm->mmio_base);
+fail_no_ioremap:
+	release_mem_region(res->start, resource_size(res));
+fail_no_mem_resource:
+	kfree(pwm);
+fail_no_mem:
+	ep93xx_pwm_release_gpio(pdev);
+	return err;
+}
+
+static int __exit ep93xx_pwm_remove(struct platform_device *pdev)
+{
+	struct ep93xx_pwm *pwm = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	ep93xx_pwm_disable(pwm);
+	clk_disable(pwm->clk);
+	clk_put(pwm->clk);
+	platform_set_drvdata(pdev, NULL);
+	sysfs_remove_group(&pdev->dev.kobj, &ep93xx_pwm_sysfs_files);
+	iounmap(pwm->mmio_base);
+	release_mem_region(res->start, resource_size(res));
+	kfree(pwm);
+	ep93xx_pwm_release_gpio(pdev);
+
+	return 0;
+}
+
+static struct platform_driver ep93xx_pwm_driver = {
+	.driver		= {
+		.name	= "ep93xx-pwm",
+		.owner	= THIS_MODULE,
+	},
+	.remove		= __exit_p(ep93xx_pwm_remove),
+};
+
+static int __init ep93xx_pwm_init(void)
+{
+	return platform_driver_probe(&ep93xx_pwm_driver, ep93xx_pwm_probe);
+}
+
+static void __exit ep93xx_pwm_exit(void)
+{
+	platform_driver_unregister(&ep93xx_pwm_driver);
+}
+
+module_init(ep93xx_pwm_init);
+module_exit(ep93xx_pwm_exit);
+
+MODULE_AUTHOR("Matthieu Crapet <mcrapet@gmail.com>, "
+	      "H Hartley Sweeten <hsweeten@visionengravers.com>");
+MODULE_DESCRIPTION("EP93xx PWM driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ep93xx-pwm");
-- 
GitLab


From 41a353d126ca332c20cfd97683b6261992743840 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Thu, 30 Jul 2009 07:20:03 +0100
Subject: [PATCH 089/257] ARM: 5629/1: Add support for Eukrea's CPU9260 &
 CPU9G20

CPU9260 and CPU9G20 share the same PCB populated with either
Atmel's AT91SAM9260B or AT91SAM9G20B with up to 64MB Strataflash,
up to 128MB SDRAM, up to 2GB NAND and an ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <eric@eukrea.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/cpu9260_defconfig  | 1338 +++++++++++++++++++++++++++
 arch/arm/configs/cpu9g20_defconfig  | 1328 ++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig          |   14 +
 arch/arm/mach-at91/Makefile         |    2 +
 arch/arm/mach-at91/board-cpu9krea.c |  385 ++++++++
 5 files changed, 3067 insertions(+)
 create mode 100644 arch/arm/configs/cpu9260_defconfig
 create mode 100644 arch/arm/configs/cpu9g20_defconfig
 create mode 100644 arch/arm/mach-at91/board-cpu9krea.c

diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
new file mode 100644
index 00000000000..601e7f3d5e9
--- /dev/null
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -0,0 +1,1338 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 14:57:55 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+# CONFIG_MACH_AFEB9260 is not set
+# CONFIG_MACH_USB_A9260 is not set
+# CONFIG_MACH_QIL_A9260 is not set
+CONFIG_MACH_CPU9260=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
new file mode 100644
index 00000000000..b5b9cbbc697
--- /dev/null
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -0,0 +1,1328 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 15:03:43 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+# CONFIG_MACH_AT91SAM9G20EK is not set
+CONFIG_MACH_CPU9G20=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 8f3e15abdb6..83a89720ada 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -217,6 +217,13 @@ config MACH_QIL_A9260
 	  Select this if you are using a Calao Systems QIL-A9260 Board.
 	  <http://www.calao-systems.com>
 
+config MACH_CPU9260
+	bool "Eukrea CPU9260 board"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using a Eukrea Electromatique's
+	  CPU9260 Board <http://www.eukrea.com/>
+
 endif
 
 # ----------------------------------------------------------
@@ -303,6 +310,13 @@ config MACH_AT91SAM9G20EK
 	help
 	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
 
+config MACH_CPU9G20
+	bool "Eukrea CPU9G20 board"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using a Eukrea Electromatique's
+	  CPU9G20 Board <http://www.eukrea.com/>
+
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 4eaf80abe10..b2ea2e5a881 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o
 obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a9260.o
 obj-$(CONFIG_MACH_QIL_A9260)	+= board-qil-a9260.o
 obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
+obj-$(CONFIG_MACH_CPU9260)	+= board-cpu9krea.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
@@ -57,6 +58,7 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 
 # AT91SAM9G45 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
new file mode 100644
index 00000000000..4bc2e9f6ebb
--- /dev/null
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -0,0 +1,385 @@
+/*
+ * linux/arch/arm/mach-at91/board-cpu9krea.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *  Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9260_matrix.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+static void __init cpu9krea_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
+		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+		ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART3 on ttyS4. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
+
+	/* USART4 on ttyS5. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+	/* USART5 on ttyS6. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init cpu9krea_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata cpu9krea_udc_data = {
+	.vbus_pin	= AT91_PIN_PC8,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata cpu9krea_macb_data = {
+	.is_rmii	= 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct atmel_nand_data __initdata cpu9krea_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.bus_width_16	= 0,
+};
+
+#ifdef CONFIG_MACH_CPU9260
+static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+		| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 2,
+};
+#else
+static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+		| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 3,
+};
+#endif
+
+static void __init cpu9krea_add_device_nand(void)
+{
+	sam9_smc_configure(3, &cpu9krea_nand_smc_config);
+	at91_add_device_nand(&cpu9krea_nand_data);
+}
+
+/*
+ * NOR flash
+ */
+static struct physmap_flash_data cpuat9260_nor_data = {
+	.width		= 2,
+};
+
+#define NOR_BASE	AT91_CHIPSELECT_0
+#define NOR_SIZE	SZ_64M
+
+static struct resource nor_flash_resources[] = {
+	{
+		.start	= NOR_BASE,
+		.end	= NOR_BASE + NOR_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device cpu9krea_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &cpuat9260_nor_data,
+	},
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+};
+
+#ifdef CONFIG_MACH_CPU9260
+static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 10,
+	.nrd_pulse		= 10,
+	.ncs_write_pulse	= 6,
+	.nwe_pulse		= 6,
+
+	.read_cycle		= 12,
+	.write_cycle		= 8,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+			| AT91_SMC_DBW_16,
+	.tdf_cycles		= 2,
+};
+#else
+static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 13,
+	.nrd_pulse		= 13,
+	.ncs_write_pulse	= 8,
+	.nwe_pulse		= 8,
+
+	.read_cycle		= 15,
+	.write_cycle		= 10,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+			| AT91_SMC_DBW_16,
+	.tdf_cycles		= 2,
+};
+#endif
+
+static __init void cpu9krea_add_device_nor(void)
+{
+	unsigned long csa;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
+
+	/* configure chip-select 0 (NOR) */
+	sam9_smc_configure(0, &cpu9krea_nor_smc_config);
+
+	platform_device_register(&cpu9krea_nor_flash);
+}
+
+/*
+ * LEDs
+ */
+static struct gpio_led cpu9krea_leds[] = {
+	{	/* LED1 */
+		.name			= "LED1",
+		.gpio			= AT91_PIN_PC11,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	},
+	{	/* LED2 */
+		.name			= "LED2",
+		.gpio			= AT91_PIN_PC12,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* LED3 */
+		.name			= "LED3",
+		.gpio			= AT91_PIN_PC7,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* LED4 */
+		.name			= "LED4",
+		.gpio			= AT91_PIN_PC9,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	}
+};
+
+static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rtc-ds1307", 0x68),
+		.type	= "ds1339",
+	},
+};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button cpu9krea_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PC3,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PB20,
+		.code		= BTN_1,
+		.desc		= "BP2",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data cpu9krea_button_data = {
+	.buttons	= cpu9krea_buttons,
+	.nbuttons	= ARRAY_SIZE(cpu9krea_buttons),
+};
+
+static struct platform_device cpu9krea_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &cpu9krea_button_data,
+	}
+};
+
+static void __init cpu9krea_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PC3, 1);	/* BP1 */
+	at91_set_deglitch(AT91_PIN_PC3, 1);
+	at91_set_gpio_input(AT91_PIN_PB20, 1);	/* BP2 */
+	at91_set_deglitch(AT91_PIN_PB20, 1);
+
+	platform_device_register(&cpu9krea_button_device);
+}
+#else
+static void __init cpu9krea_add_device_buttons(void)
+{
+}
+#endif
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PA29,
+};
+
+static void __init cpu9krea_board_init(void)
+{
+	/* NOR */
+	cpu9krea_add_device_nor();
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&cpu9krea_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&cpu9krea_udc_data);
+	/* NAND */
+	cpu9krea_add_device_nand();
+	/* Ethernet */
+	at91_add_device_eth(&cpu9krea_macb_data);
+	/* MMC */
+	at91_add_device_mmc(0, &cpu9krea_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(cpu9krea_i2c_devices,
+		ARRAY_SIZE(cpu9krea_i2c_devices));
+	/* LEDs */
+	at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds));
+	/* Push Buttons */
+	cpu9krea_add_device_buttons();
+}
+
+#ifdef CONFIG_MACH_CPU9260
+MACHINE_START(CPUAT9260, "Eukrea CPU9260")
+#else
+MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
+#endif
+	/* Maintainer: Eric Benard - EUKREA Electromatique */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= cpu9krea_map_io,
+	.init_irq	= cpu9krea_init_irq,
+	.init_machine	= cpu9krea_board_init,
+MACHINE_END
-- 
GitLab


From 10233a939812450e4fe07cf529585bab5b4d99ec Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Thu, 30 Jul 2009 07:23:42 +0100
Subject: [PATCH 090/257] ARM: 5630/1: Add support for Eukrea's CPUAT91

CPUAT91 is based on Atmel's AT91RM9200 with up to 16MB Strataflash,
up to 128MB SDRAM and an ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <ebenard@eukrea.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/cpuat91_defconfig | 1316 ++++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig         |    7 +
 arch/arm/mach-at91/Makefile        |    1 +
 arch/arm/mach-at91/board-cpuat91.c |  185 ++++
 4 files changed, 1509 insertions(+)
 create mode 100644 arch/arm/configs/cpuat91_defconfig
 create mode 100644 arch/arm/mach-at91/board-cpuat91.c

diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
new file mode 100644
index 00000000000..4901827253f
--- /dev/null
+++ b/arch/arm/configs/cpuat91_defconfig
@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 14:45:01 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_MACH_ONEARM is not set
+# CONFIG_ARCH_AT91RM9200DK is not set
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+CONFIG_MACH_CPUAT91=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91RM9200 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 83a89720ada..a24d824c428 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -156,6 +156,13 @@ config MACH_YL9200
 	help
 	  Select this if you are using the ucDragon YL-9200 board.
 
+config MACH_CPUAT91
+	bool "Eukrea CPUAT91"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using the Eukrea Electromatique's
+	  CPUAT91 board <http://www.eukrea.com/>.
+
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index b2ea2e5a881..a6ed015d82e 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
 obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
 obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
 obj-$(CONFIG_MACH_YL9200)	+= board-yl-9200.o
+obj-$(CONFIG_MACH_CPUAT91)	+= board-cpuat91.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
new file mode 100644
index 00000000000..a28d9965619
--- /dev/null
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -0,0 +1,185 @@
+/*
+ * linux/arch/arm/mach-at91/board-cpuat91.c
+ *
+ *  Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
+
+#include "generic.h"
+
+static struct gpio_led cpuat91_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= AT91_PIN_PC0,
+	},
+};
+
+static void __init cpuat91_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
+		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+		ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART2 on ttyS3 (Rx, Tx) */
+	at91_register_uart(AT91RM9200_ID_US2, 3, 0);
+
+	/* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init cpuat91_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata cpuat91_eth_data = {
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata cpuat91_usbh_data = {
+	.ports		= 1,
+};
+
+static struct at91_udc_data __initdata cpuat91_udc_data = {
+	.vbus_pin	= AT91_PIN_PC15,
+	.pullup_pin	= AT91_PIN_PC14,
+};
+
+static struct at91_mmc_data __initdata cpuat91_mmc_data = {
+	.det_pin	= AT91_PIN_PC2,
+	.wire4		= 1,
+};
+
+static struct physmap_flash_data cpuat91_flash_data = {
+	.width		= 2,
+};
+
+static struct resource cpuat91_flash_resource = {
+	.start		= AT91_CHIPSELECT_0,
+	.end		= AT91_CHIPSELECT_0 + SZ_16M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device cpuat91_norflash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &cpuat91_flash_data,
+	},
+	.resource	= &cpuat91_flash_resource,
+	.num_resources	= 1,
+};
+
+#ifdef CONFIG_MTD_PLATRAM
+struct platdata_mtd_ram at91_sram_pdata = {
+	.mapname	= "SRAM",
+	.bankwidth	= 2,
+};
+
+static struct resource at91_sram_resource[] = {
+	[0] = {
+		.start = AT91RM9200_SRAM_BASE,
+		.end   = AT91RM9200_SRAM_BASE + AT91RM9200_SRAM_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device at91_sram = {
+	.name		= "mtd-ram",
+	.id		= 0,
+	.resource	= at91_sram_resource,
+	.num_resources	= ARRAY_SIZE(at91_sram_resource),
+	.dev	= {
+		.platform_data = &at91_sram_pdata,
+	},
+};
+#endif /* MTD_PLATRAM */
+
+static struct platform_device *platform_devices[] __initdata = {
+	&cpuat91_norflash,
+#ifdef CONFIG_MTD_PLATRAM
+	&at91_sram,
+#endif /* CONFIG_MTD_PLATRAM */
+};
+
+static void __init cpuat91_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* LEDs. */
+	at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
+	/* Ethernet */
+	at91_add_device_eth(&cpuat91_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&cpuat91_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&cpuat91_udc_data);
+	/* MMC */
+	at91_add_device_mmc(0, &cpuat91_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* Platform devices */
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+MACHINE_START(CPUAT91, "Eukrea")
+	/* Maintainer: Eric Benard - EUKREA Electromatique */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= cpuat91_map_io,
+	.init_irq	= cpuat91_init_irq,
+	.init_machine	= cpuat91_board_init,
+MACHINE_END
-- 
GitLab


From b0e66522f4d86713b0450255210e26c4f11ee86b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:20 +0100
Subject: [PATCH 091/257] ARM: S3C24XX: Add BWSCON per-bank information.

Add definitions and an accessor macro to deal with
reading bus information from S3C2410_BWSCON for any
given numbered bank.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/regs-mem.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 57759804e2f..7f7c5294796 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -73,6 +73,16 @@
 #define S3C2410_BWSCON_WS7		(1<<30)
 #define S3C2410_BWSCON_ST7		(1<<31)
 
+/* accesor functions for getting BANK(n) configuration. (n != 0) */
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_DW8		(0)
+#define S3C2410_BWSCON_DW16		(1)
+#define S3C2410_BWSCON_DW32		(2)
+#define S3C2410_BWSCON_WS		(1 << 2)
+#define S3C2410_BWSCON_ST		(1 << 3)
+
 /* memory set (rom, ram) */
 #define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
 #define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
-- 
GitLab


From 2e4ea6e8209e0c1d93c69c34c32002337b3f747e Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:21 +0100
Subject: [PATCH 092/257] ARM: S3C24XX: CPUFREQ: Add core support.

Add the core of the support for enabling the CPUFreq driver on
all S3C24XX based systems.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Makefile                |   2 +
 arch/arm/plat-s3c24xx/cpu-freq.c              | 704 ++++++++++++++++++
 .../plat-s3c24xx/include/plat/cpu-freq-core.h | 183 +++++
 3 files changed, 889 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/cpu-freq.c
 create mode 100644 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h

diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c282..1f6add552bd 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -20,6 +20,8 @@ obj-y				+= gpiolib.o
 obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
+obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
+
 # Architecture dependant builds
 
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
new file mode 100644
index 00000000000..40ff7e2569d
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -0,0 +1,704 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
+ *
+ * Copyright (c) 2006,2007,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+#include <mach/regs-clock.h>
+
+/* note, cpufreq support deals in kHz, no Hz */
+
+static struct cpufreq_driver s3c24xx_driver;
+static struct s3c_cpufreq_config cpu_cur;
+static struct s3c_iotimings s3c24xx_iotiming;
+static struct cpufreq_frequency_table *pll_reg;
+static unsigned int last_target = ~0;
+static unsigned int ftab_size;
+static struct cpufreq_frequency_table *ftab;
+
+static struct clk *_clk_mpll;
+static struct clk *_clk_xtal;
+static struct clk *clk_fclk;
+static struct clk *clk_hclk;
+static struct clk *clk_pclk;
+static struct clk *clk_arm;
+
+static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long fclk, pclk, hclk, armclk;
+
+	cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
+	cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
+	cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
+	cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
+
+	cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
+	cfg->pll.frequency = fclk;
+
+	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+
+	cfg->divs.h_divisor = fclk / hclk;
+	cfg->divs.p_divisor = fclk / pclk;
+}
+
+static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long pll = cfg->pll.frequency;
+
+	cfg->freq.fclk = pll;
+	cfg->freq.hclk = pll / cfg->divs.h_divisor;
+	cfg->freq.pclk = pll / cfg->divs.p_divisor;
+
+	/* convert hclk into 10ths of nanoseconds for io calcs */
+	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+}
+
+static inline int closer(unsigned int target, unsigned int n, unsigned int c)
+{
+	int diff_cur = abs(target - c);
+	int diff_new = abs(target - n);
+
+	return (diff_new < diff_cur);
+}
+
+static void s3c_cpufreq_show(const char *pfx,
+				 struct s3c_cpufreq_config *cfg)
+{
+	s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
+		     pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->divs.h_divisor,
+		     cfg->freq.pclk, cfg->divs.p_divisor);
+}
+
+/* functions to wrapper the driver info calls to do the cpu specific work */
+
+static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
+{
+	if (cfg->info->set_iotiming)
+		(cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
+}
+
+static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
+{
+	if (cfg->info->calc_iotiming)
+		return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
+
+	return 0;
+}
+
+static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_refresh)(cfg);
+}
+
+static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_divs)(cfg);
+}
+
+static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	return (cfg->info->calc_divs)(cfg);
+}
+
+static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_fvco)(cfg);
+}
+
+static inline void s3c_cpufreq_resume_clocks(void)
+{
+	cpu_cur.info->resume_clocks();
+}
+
+static inline void s3c_cpufreq_updateclk(struct clk *clk,
+					 unsigned int freq)
+{
+	clk_set_rate(clk, freq);
+}
+
+static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
+				 unsigned int target_freq,
+				 struct cpufreq_frequency_table *pll)
+{
+	struct s3c_cpufreq_freqs freqs;
+	struct s3c_cpufreq_config cpu_new;
+	unsigned long flags;
+
+	cpu_new = cpu_cur;  /* copy new from current */
+
+	s3c_cpufreq_show("cur", &cpu_cur);
+
+	/* TODO - check for DMA currently outstanding */
+
+	cpu_new.pll = pll ? *pll : cpu_cur.pll;
+
+	if (pll)
+		freqs.pll_changing = 1;
+
+	/* update our frequencies */
+
+	cpu_new.freq.armclk = target_freq;
+	cpu_new.freq.fclk = cpu_new.pll.frequency;
+
+	if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
+		printk(KERN_ERR "no divisors for %d\n", target_freq);
+		goto err_notpossible;
+	}
+
+	s3c_freq_dbg("%s: got divs\n", __func__);
+
+	s3c_cpufreq_calc(&cpu_new);
+
+	s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
+
+	if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
+		if (s3c_cpufreq_calcio(&cpu_new) < 0) {
+			printk(KERN_ERR "%s: no IO timings\n", __func__);
+			goto err_notpossible;
+		}
+	}
+
+	s3c_cpufreq_show("new", &cpu_new);
+
+	/* setup our cpufreq parameters */
+
+	freqs.old = cpu_cur.freq;
+	freqs.new = cpu_new.freq;
+
+	freqs.freqs.cpu = 0;
+	freqs.freqs.old = cpu_cur.freq.armclk / 1000;
+	freqs.freqs.new = cpu_new.freq.armclk / 1000;
+
+	/* update f/h/p clock settings before we issue the change
+	 * notification, so that drivers do not need to do anything
+	 * special if they want to recalculate on CPUFREQ_PRECHANGE. */
+
+	s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
+	s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
+	s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
+	s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
+
+	/* start the frequency change */
+
+	if (policy)
+		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
+
+	/* If hclk is staying the same, then we do not need to
+	 * re-write the IO or the refresh timings whilst we are changing
+	 * speed. */
+
+	local_irq_save(flags);
+
+	/* is our memory clock slowing down? */
+	if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
+		s3c_cpufreq_setrefresh(&cpu_new);
+		s3c_cpufreq_setio(&cpu_new);
+	}
+
+	if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
+		/* not changing PLL, just set the divisors */
+
+		s3c_cpufreq_setdivs(&cpu_new);
+	} else {
+		if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
+			/* slow the cpu down, then set divisors */
+
+			s3c_cpufreq_setfvco(&cpu_new);
+			s3c_cpufreq_setdivs(&cpu_new);
+		} else {
+			/* set the divisors, then speed up */
+
+			s3c_cpufreq_setdivs(&cpu_new);
+			s3c_cpufreq_setfvco(&cpu_new);
+		}
+	}
+
+	/* did our memory clock speed up */
+	if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
+		s3c_cpufreq_setrefresh(&cpu_new);
+		s3c_cpufreq_setio(&cpu_new);
+	}
+
+	/* update our current settings */
+	cpu_cur = cpu_new;
+
+	local_irq_restore(flags);
+
+	/* notify everyone we've done this */
+	if (policy)
+		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
+
+	s3c_freq_dbg("%s: finished\n", __func__);
+	return 0;
+
+ err_notpossible:
+	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+	return -EINVAL;
+}
+
+/* s3c_cpufreq_target
+ *
+ * called by the cpufreq core to adjust the frequency that the CPU
+ * is currently running at.
+ */
+
+static int s3c_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct cpufreq_frequency_table *pll;
+	unsigned int index;
+
+	/* avoid repeated calls which cause a needless amout of duplicated
+	 * logging output (and CPU time as the calculation process is
+	 * done) */
+	if (target_freq == last_target)
+		return 0;
+
+	last_target = target_freq;
+
+	s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
+		     __func__, policy, target_freq, relation);
+
+	if (ftab) {
+		if (cpufreq_frequency_table_target(policy, ftab,
+						   target_freq, relation,
+						   &index)) {
+			s3c_freq_dbg("%s: table failed\n", __func__);
+			return -EINVAL;
+		}
+
+		s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
+			     target_freq, index, ftab[index].frequency);
+		target_freq = ftab[index].frequency;
+	}
+
+	target_freq *= 1000;  /* convert target to Hz */
+
+	/* find the settings for our new frequency */
+
+	if (!pll_reg || cpu_cur.lock_pll) {
+		/* either we've not got any PLL values, or we've locked
+		 * to the current one. */
+		pll = NULL;
+	} else {
+		struct cpufreq_policy tmp_policy;
+		int ret;
+
+		/* we keep the cpu pll table in Hz, to ensure we get an
+		 * accurate value for the PLL output. */
+
+		tmp_policy.min = policy->min * 1000;
+		tmp_policy.max = policy->max * 1000;
+		tmp_policy.cpu = policy->cpu;
+
+		/* cpufreq_frequency_table_target uses a pointer to 'index'
+		 * which is the number of the table entry, not the value of
+		 * the table entry's index field. */
+
+		ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
+						     target_freq, relation,
+						     &index);
+
+		if (ret < 0) {
+			printk(KERN_ERR "%s: no PLL available\n", __func__);
+			goto err_notpossible;
+		}
+
+		pll = pll_reg + index;
+
+		s3c_freq_dbg("%s: target %u => %u\n",
+			     __func__, target_freq, pll->frequency);
+
+		target_freq = pll->frequency;
+	}
+
+	return s3c_cpufreq_settarget(policy, target_freq, pll);
+
+ err_notpossible:
+	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+	return -EINVAL;
+}
+
+static unsigned int s3c_cpufreq_get(unsigned int cpu)
+{
+	return clk_get_rate(clk_arm) / 1000;
+}
+
+struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
+{
+	struct clk *clk;
+
+	clk = clk_get(dev, name);
+	if (IS_ERR(clk))
+		printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+
+	return clk;
+}
+
+static int s3c_cpufreq_init(struct cpufreq_policy *policy)
+{
+	printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	policy->cur = s3c_cpufreq_get(0);
+	policy->min = policy->cpuinfo.min_freq = 0;
+	policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	/* feed the latency information from the cpu driver */
+	policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+	if (ftab)
+		cpufreq_frequency_table_cpuinfo(policy, ftab);
+
+	return 0;
+}
+
+static __init int s3c_cpufreq_initclks(void)
+{
+	_clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
+	_clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+	clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+	clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+	clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
+	clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
+
+	if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
+	    IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
+		printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+		return -ENOENT;
+	}
+
+	printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
+	       clk_get_rate(clk_fclk) / 1000,
+	       clk_get_rate(clk_hclk) / 1000,
+	       clk_get_rate(clk_pclk) / 1000,
+	       clk_get_rate(clk_arm) / 1000);
+
+	return 0;
+}
+
+static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static struct cpufreq_frequency_table suspend_pll;
+static unsigned int suspend_freq;
+
+static int s3c_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
+{
+	suspend_pll.frequency = clk_get_rate(_clk_mpll);
+	suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
+	suspend_freq = s3c_cpufreq_get(0) * 1000;
+
+	return 0;
+}
+
+static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
+
+	last_target = ~0;	/* invalidate last_target setting */
+
+	/* first, find out what speed we resumed at. */
+	s3c_cpufreq_resume_clocks();
+
+	/* whilst we will be called later on, we try and re-set the
+	 * cpu frequencies as soon as possible so that we do not end
+	 * up resuming devices and then immediatley having to re-set
+	 * a number of settings once these devices have restarted.
+	 *
+	 * as a note, it is expected devices are not used until they
+	 * have been un-suspended and at that time they should have
+	 * used the updated clock settings.
+	 */
+
+	ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+#else
+#define s3c_cpufreq_resume NULL
+#define s3c_cpufreq_suspend NULL
+#endif
+
+static struct cpufreq_driver s3c24xx_driver = {
+	.flags		= CPUFREQ_STICKY,
+	.verify		= s3c_cpufreq_verify,
+	.target		= s3c_cpufreq_target,
+	.get		= s3c_cpufreq_get,
+	.init		= s3c_cpufreq_init,
+	.suspend	= s3c_cpufreq_suspend,
+	.resume		= s3c_cpufreq_resume,
+	.name		= "s3c24xx",
+};
+
+
+int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
+{
+	if (!info || !info->name) {
+		printk(KERN_ERR "%s: failed to pass valid information\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
+	       info->name);
+
+	/* check our driver info has valid data */
+
+	BUG_ON(info->set_refresh == NULL);
+	BUG_ON(info->set_divs == NULL);
+	BUG_ON(info->calc_divs == NULL);
+
+	/* info->set_fvco is optional, depending on whether there
+	 * is a need to set the clock code. */
+
+	cpu_cur.info = info;
+
+	/* Note, driver registering should probably update locktime */
+
+	return 0;
+}
+
+int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+	struct s3c_cpufreq_board *ours;
+
+	if (!board) {
+		printk(KERN_INFO "%s: no board data\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Copy the board information so that each board can make this
+	 * initdata. */
+
+	ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
+	if (ours == NULL) {
+		printk(KERN_ERR "%s: no memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	*ours = *board;
+	cpu_cur.board = ours;
+
+	return 0;
+}
+
+int __init s3c_cpufreq_auto_io(void)
+{
+	int ret;
+
+	if (!cpu_cur.info->get_iotiming) {
+		printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+		return -ENOENT;
+	}
+
+	printk(KERN_INFO "%s: working out IO settings\n", __func__);
+
+	ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
+	if (ret)
+		printk(KERN_ERR "%s: failed to get timings\n", __func__);
+
+	return ret;
+}
+
+/* if one or is zero, then return the other, otherwise return the min */
+#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
+
+/**
+ * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
+ * @dst: The destination structure
+ * @a: One argument.
+ * @b: The other argument.
+ *
+ * Create a minimum of each frequency entry in the 'struct s3c_freq',
+ * unless the entry is zero when it is ignored and the non-zero argument
+ * used.
+ */
+static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
+				 struct s3c_freq *a, struct s3c_freq *b)
+{
+	dst->fclk = do_min(a->fclk, b->fclk);
+	dst->hclk = do_min(a->hclk, b->hclk);
+	dst->pclk = do_min(a->pclk, b->pclk);
+	dst->armclk = do_min(a->armclk, b->armclk);
+}
+
+static inline u32 calc_locktime(u32 freq, u32 time_us)
+{
+	u32 result;
+
+	result = freq * time_us;
+	result = DIV_ROUND_UP(result, 1000 * 1000);
+
+	return result;
+}
+
+static void s3c_cpufreq_update_loctkime(void)
+{
+	unsigned int bits = cpu_cur.info->locktime_bits;
+	u32 rate = (u32)clk_get_rate(_clk_xtal);
+	u32 val;
+
+	if (bits == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
+	val |= calc_locktime(rate, cpu_cur.info->locktime_m);
+
+	printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+	__raw_writel(val, S3C2410_LOCKTIME);
+}
+
+static int s3c_cpufreq_build_freq(void)
+{
+	int size, ret;
+
+	if (!cpu_cur.info->calc_freqtable)
+		return -EINVAL;
+
+	kfree(ftab);
+	ftab = NULL;
+
+	size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
+	size++;
+
+	ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
+	if (!ftab) {
+		printk(KERN_ERR "%s: no memory for tables\n", __func__);
+		return -ENOMEM;
+	}
+
+	ftab_size = size;
+
+	ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
+	s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
+
+	return 0;
+}
+
+static int __init s3c_cpufreq_initcall(void)
+{
+	int ret = 0;
+
+	if (cpu_cur.info && cpu_cur.board) {
+		ret = s3c_cpufreq_initclks();
+		if (ret)
+			goto out;
+
+		/* get current settings */
+		s3c_cpufreq_getcur(&cpu_cur);
+		s3c_cpufreq_show("cur", &cpu_cur);
+
+		if (cpu_cur.board->auto_io) {
+			ret = s3c_cpufreq_auto_io();
+			if (ret) {
+				printk(KERN_ERR "%s: failed to get io timing\n",
+				       __func__);
+				goto out;
+			}
+		}
+
+		if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
+			printk(KERN_ERR "%s: no IO support registered\n",
+			       __func__);
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (!cpu_cur.info->need_pll)
+			cpu_cur.lock_pll = 1;
+
+		s3c_cpufreq_update_loctkime();
+
+		s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
+				     &cpu_cur.info->max);
+
+		if (cpu_cur.info->calc_freqtable)
+			s3c_cpufreq_build_freq();
+
+		ret = cpufreq_register_driver(&s3c24xx_driver);
+	}
+
+ out:
+	return ret;
+}
+
+late_initcall(s3c_cpufreq_initcall);
+
+/**
+ * s3c_plltab_register - register CPU PLL table.
+ * @plls: The list of PLL entries.
+ * @plls_no: The size of the PLL entries @plls.
+ *
+ * Register the given set of PLLs with the system.
+ */
+int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
+			       unsigned int plls_no)
+{
+	struct cpufreq_frequency_table *vals;
+	unsigned int size;
+
+	size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
+
+	vals = kmalloc(size, GFP_KERNEL);
+	if (vals) {
+		memcpy(vals, plls, size);
+		pll_reg = vals;
+
+		/* write a terminating entry, we don't store it in the
+		 * table that is stored in the kernel */
+		vals += plls_no;
+		vals->frequency = CPUFREQ_TABLE_END;
+
+		printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+	} else
+		printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+
+	return vals ? 0 : -ENOMEM;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
new file mode 100644
index 00000000000..e078821b360
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -0,0 +1,183 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/cpu-freq.h>
+
+#define MAX_BANKS (8)
+#define S3C2412_MAX_IO	(8)
+
+/**
+ * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
+ * @bankcon: The cached version of settings in this structure.
+ * @tacp:
+ * @tacs: Time from address valid to nCS asserted.
+ * @tcos: Time from nCS asserted to nOE or nWE asserted.
+ * @tacc: Time that nOE or nWE is asserted.
+ * @tcoh: Time nCS is held after nOE or nWE are released.
+ * @tcah: Time address is held for after
+ * @nwait_en: Whether nWAIT is enabled for this bank.
+ *
+ * This structure represents the IO timings for a S3C2410 style IO bank
+ * used by the CPU frequency support if it needs to change the settings
+ * of the IO.
+ */
+struct s3c2410_iobank_timing {
+	unsigned long	bankcon;
+	unsigned int	tacp;
+	unsigned int	tacs;
+	unsigned int	tcos;
+	unsigned int	tacc;
+	unsigned int	tcoh;		/* nCS hold afrer nOE/nWE */
+	unsigned int	tcah;		/* Address hold after nCS */
+	unsigned char	nwait_en;	/* nWait enabled for bank. */
+};
+
+union s3c_iobank {
+	  struct s3c2410_iobank_timing	*io_2410;
+};
+
+/**
+ * struct s3c_iotimings - Chip IO timings holder
+ * @bank: The timings for each IO bank.
+ */
+struct s3c_iotimings {
+	union s3c_iobank	bank[MAX_BANKS];
+};
+
+/**
+ * struct s3c_plltab - PLL table information.
+ * @vals: List of PLL values.
+ * @size: Size of the PLL table @vals.
+ */
+struct s3c_plltab {
+	struct s3c_pllval	*vals;
+	int			 size;
+};
+
+/**
+ * struct s3c_cpufreq_info - Information for the CPU frequency driver.
+ * @name: The name of this implementation.
+ * @max: The maximum frequencies for the system.
+ * @latency: Transition latency to give to cpufreq.
+ * @locktime_m: The lock-time in uS for the MPLL.
+ * @locktime_u: The lock-time in uS for the UPLL.
+ * @locttime_bits: The number of bits each LOCKTIME field.
+ * @need_pll: Set if this driver needs to change the PLL values to acheive
+ *	any frequency changes. This is really only need by devices like the
+ *	S3C2410 where there is no or limited divider between the PLL and the
+ *	ARMCLK.
+ * @resume_clocks: Update the clocks on resume.
+ * @get_iotiming: Get the current IO timing data, mainly for use at start.
+ * @set_iotiming: Update the IO timings from the cached copies calculated
+ *	from the @calc_iotiming entry when changing the frequency.
+ * @calc_iotiming: Calculate and update the cached copies of the IO timings
+ *	from the newly calculated frequencies.
+ * @calc_freqtable: Calculate (fill in) the given frequency table from the
+ *	current frequency configuration. If the table passed in is NULL,
+ *	then the return is the number of elements to be filled for allocation
+ *	of the table.
+ * @set_refresh: Set the memory refresh configuration.
+ * @set_fvco: Set the PLL frequencies.
+ * @set_divs: Update the clock divisors.
+ * @calc_divs: Calculate the clock divisors.
+ */
+struct s3c_cpufreq_info {
+	const char		*name;
+	struct s3c_freq		max;
+
+	unsigned int		latency;
+
+	unsigned int		locktime_m;
+	unsigned int		locktime_u;
+	unsigned char		locktime_bits;
+
+	unsigned int		need_pll:1;
+
+	/* driver routines */
+
+	void		(*resume_clocks)(void);
+
+	int		(*get_iotiming)(struct s3c_cpufreq_config *cfg,
+					struct s3c_iotimings *timings);
+
+	void		(*set_iotiming)(struct s3c_cpufreq_config *cfg,
+					struct s3c_iotimings *timings);
+
+	int		(*calc_iotiming)(struct s3c_cpufreq_config *cfg,
+					 struct s3c_iotimings *timings);
+
+	int		(*calc_freqtable)(struct s3c_cpufreq_config *cfg,
+					  struct cpufreq_frequency_table *t,
+					  size_t table_size);
+
+	void		(*set_refresh)(struct s3c_cpufreq_config *cfg);
+	void		(*set_fvco)(struct s3c_cpufreq_config *cfg);
+	void		(*set_divs)(struct s3c_cpufreq_config *cfg);
+	int		(*calc_divs)(struct s3c_cpufreq_config *cfg);
+};
+
+extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
+
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
+
+/* Useful utility functions. */
+
+extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
+
+/* S3C2410 and compatible exported functions */
+
+extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+
+extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#define s3c_freq_dbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+
+static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
+				      int index, size_t table_size,
+				      unsigned int freq)
+{
+	if (index < 0)
+		return index;
+
+	if (table) {
+		if (index >= table_size)
+			return -ENOMEM;
+
+		s3c_freq_dbg("%s: { %d = %u kHz }\n",
+			     __func__, index, freq);
+
+		table[index].index = index;
+		table[index].frequency = freq;
+	}
+
+	return index + 1;
+}
-- 
GitLab


From ea5fe9aedf512d20b75b7dcfd54ab99ae5c0934b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:22 +0100
Subject: [PATCH 093/257] ARM: S3C: CPUFREQ: Documentation for cpufreq header

Update arch/arm/plat-s3c/include/plat/cpu-freq.h to include kerneldoc
style documentation.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/cpu-freq.h | 91 ++++++++++++++++++++---
 1 file changed, 81 insertions(+), 10 deletions(-)

diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index c86a13307e9..0ba7670fd07 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -17,6 +17,21 @@ struct s3c_cpufreq_info;
 struct s3c_cpufreq_board;
 struct s3c_iotimings;
 
+/**
+ * struct s3c_freq - frequency information (mainly for core drivers)
+ * @fclk: The FCLK frequency in Hz.
+ * @armclk: The ARMCLK frequency in Hz.
+ * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
+ * @hclk: The HCLK frequency in Hz.
+ * @pclk: The PCLK frequency in Hz.
+ *
+ * This contains the frequency information about the current configuration
+ * mainly for the core drivers to ensure we do not end up passing about
+ * a large number of parameters.
+ *
+ * The @hclk_tns field is a useful cache for the parts of the drivers that
+ * need to calculate IO timings and suchlike.
+ */
 struct s3c_freq {
 	unsigned long	fclk;
 	unsigned long	armclk;
@@ -25,33 +40,75 @@ struct s3c_freq {
 	unsigned long	pclk;
 };
 
-/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+/**
+ * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
+ * @freqs: The cpufreq setting information.
+ * @old: The old clock settings.
+ * @new: The new clock settings.
+ * @pll_changing: Set if the PLL is changing.
+ *
+ * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
  * notification can use this information that is not provided by just
  * having the core frequency alone.
+ *
+ * The pll_changing flag is used to indicate if the PLL itself is
+ * being set during this change. This is important as the clocks
+ * will temporarily be set to the XTAL clock during this time, so
+ * drivers may want to close down their output during this time.
+ *
+ * Note, this is not being used by any current drivers and therefore
+ * may be removed in the future.
  */
-
 struct s3c_cpufreq_freqs {
 	struct cpufreq_freqs	freqs;
 	struct s3c_freq		old;
 	struct s3c_freq		new;
+
+	unsigned int		pll_changing:1;
 };
 
 #define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
 
+/**
+ * struct s3c_clkdivs - clock divisor information
+ * @p_divisor: Divisor from FCLK to PCLK.
+ * @h_divisor: Divisor from FCLK to HCLK.
+ * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
+ * @dvs: Non-zero if using DVS mode for ARMCLK.
+ *
+ * Divisor settings for the core clocks.
+ */
 struct s3c_clkdivs {
-	int		p_divisor;	/* fclk / pclk */
-	int		h_divisor;	/* fclk / hclk */
-	int		arm_divisor;	/* not all cpus have this. */
-	unsigned char	dvs;		/* using dvs mode to arm. */
+	int		p_divisor;
+	int		h_divisor;
+	int		arm_divisor;
+	unsigned char	dvs;
 };
 
 #define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
 
+/**
+ * struct s3c_pllval - PLL value entry.
+ * @freq: The frequency for this entry in Hz.
+ * @pll_reg: The PLL register setting for this PLL value.
+ */
 struct s3c_pllval {
 	unsigned long		freq;
 	unsigned long		pll_reg;
 };
 
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
 struct s3c_cpufreq_config {
 	struct s3c_freq		freq;
 	struct s3c_pllval	pll;
@@ -60,13 +117,27 @@ struct s3c_cpufreq_config {
 	struct s3c_cpufreq_board *board;
 };
 
-/* s3c_cpufreq_board
+/**
+ * struct s3c_cpufreq_board - per-board cpu frequency informatin
+ * @refresh: The SDRAM refresh period in nanoseconds.
+ * @auto_io: Set if the IO timing settings should be generated from the
+ *	initialisation time hardware registers.
+ * @need_io: Set if the board has external IO on any of the chipselect
+ *	lines that will require the hardware timing registers to be
+ *	updated on a clock change.
+ * @max: The maxium frequency limits for the system. Any field that
+ *	is left at zero will use the CPU's settings.
+ *
+ * This contains the board specific settings that affect how the CPU
+ * drivers chose settings. These include the memory refresh and IO
+ * timing information.
  *
- * per-board configuraton information, such as memory refresh and
- * how to initialise IO timings.
+ * Registration depends on the driver being used, the ARMCLK only
+ * implementation does not currently need this but the older style
+ * driver requires this to be available.
  */
 struct s3c_cpufreq_board {
-	unsigned int	refresh;	/* refresh period in ns */
+	unsigned int	refresh;
 	unsigned int	auto_io:1;	/* automatically init io timings. */
 	unsigned int	need_io:1;	/* set if needs io timing support. */
 
-- 
GitLab


From d6fc87d3f7d236892e4d0003a07cd2b5171e5e27 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:23 +0100
Subject: [PATCH 094/257] ARM: S3C: CPUFREQ: Move struct s3c_cpufreq_config to
 cpu-freq-core.h

Move the structure s3c_cpufreq_config from cpu-freq.h to the
less advertised cpu-freq-core.h as it is not needed by anything
outside the core drivers.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/cpu-freq.h     | 20 ---------------
 .../plat-s3c24xx/include/plat/cpu-freq-core.h | 25 +++++++++++++++++++
 2 files changed, 25 insertions(+), 20 deletions(-)

diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index 0ba7670fd07..7b982b7f28c 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -97,26 +97,6 @@ struct s3c_pllval {
 	unsigned long		pll_reg;
 };
 
-/**
- * struct s3c_cpufreq_config - current cpu frequency configuration
- * @freq: The current settings for the core clocks.
- * @pll: The PLL table entry for the current PLL settings.
- * @divs: The divisor settings for the core clocks.
- * @info: The current core driver information.
- * @board: The information for the board we are running on.
- *
- * This is for the core drivers that need to know information about
- * the current settings and values. It should not be needed by any
- * device drivers.
-*/
-struct s3c_cpufreq_config {
-	struct s3c_freq		freq;
-	struct s3c_pllval	pll;
-	struct s3c_clkdivs	divs;
-	struct s3c_cpufreq_info *info;	/* for core, not drivers */
-	struct s3c_cpufreq_board *board;
-};
-
 /**
  * struct s3c_cpufreq_board - per-board cpu frequency informatin
  * @refresh: The SDRAM refresh period in nanoseconds.
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index e078821b360..7938fb0bc38 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -64,6 +64,31 @@ struct s3c_plltab {
 	int			 size;
 };
 
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @max: Maxium settings, derived from core, board and user settings.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ * @lock_pll: Set if the PLL settings cannot be changed.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
+struct s3c_cpufreq_config {
+	struct s3c_freq		freq;
+	struct s3c_freq		max;
+	struct cpufreq_frequency_table pll;
+	struct s3c_clkdivs	divs;
+	struct s3c_cpufreq_info *info;	/* for core, not drivers */
+	struct s3c_cpufreq_board *board;
+
+	unsigned int	lock_pll:1;
+};
+
 /**
  * struct s3c_cpufreq_info - Information for the CPU frequency driver.
  * @name: The name of this implementation.
-- 
GitLab


From 89c52ed4687faca6bf0eabf6d46eaee4a14376b3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:24 +0100
Subject: [PATCH 095/257] ARM: Add ARCH_HAS_CPUFREQ for presence of CPUFREQ
 driver

Add ARCH_HAS_CPUFREQ so that each machine config can select
it if they have CPUFREQ driver support. This means that the
CPUFREQ specific area does not need the if statement updating
each time a new machine is added.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..7dbaabd8df3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -126,6 +126,13 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
 	bool
 
+config ARCH_HAS_CPUFREQ
+	bool
+	help
+	  Internal node to signify that the ARCH has CPUFREQ support
+	  and that the relevant menu configurations are displayed for
+	  it.
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -203,6 +210,7 @@ config ARCH_AAEC2000
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ICST525
@@ -509,6 +517,7 @@ config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select COMMON_CLKDEV
@@ -551,6 +560,7 @@ config ARCH_SA1100
 	select ISA
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -573,6 +583,7 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select ARCH_HAS_CPUFREQ
 	help
 	  Samsung S3C64XX series based systems
 
@@ -632,6 +643,7 @@ config ARCH_OMAP
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
@@ -1241,7 +1253,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
+if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
-- 
GitLab


From 9d56c02a5a171e1fdb87f3b718b418cb0522d2b1 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:25 +0100
Subject: [PATCH 096/257] ARM: Add S3C24XX to CPUFreq KConfig

Add the S3C24XX to the main ARM CPUFreq Kconfig support list.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7dbaabd8df3..c7a83efef0b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -573,6 +573,7 @@ config ARCH_SA1100
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	select GENERIC_GPIO
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
@@ -1288,6 +1289,46 @@ config CPU_FREQ_S3C64XX
 	bool "CPUfreq support for Samsung S3C64XX CPUs"
 	depends on CPU_FREQ && CPU_S3C6410
 
+config CPU_FREQ_S3C
+	bool
+	help
+	  Internal configuration node for common cpufreq on Samsung SoC
+
+config CPU_FREQ_S3C24XX
+	bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+	select CPU_FREQ_S3C
+	help
+	  This enables the CPUfreq driver for the Samsung S3C24XX family
+	  of CPUs.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_S3C24XX_PLL
+	bool "Support CPUfreq changing of PLL frequency"
+	depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+	help
+	  Compile in support for changing the PLL frequency from the
+	  S3C24XX series CPUfreq driver. The PLL takes time to settle
+	  after a frequency change, so by default it is not enabled.
+
+	  This also means that the PLL tables for the selected CPU(s) will
+	  be built which may increase the size of the kernel image.
+
+config CPU_FREQ_S3C24XX_DEBUG
+	bool "Debug CPUfreq Samsung driver core"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_IODEBUG
+	bool "Debug CPUfreq Samsung driver IO timing"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
 endif
 
 source "drivers/cpuidle/Kconfig"
-- 
GitLab


From 831a6fcb9393960b35173fa2e0f835b710152fff Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:26 +0100
Subject: [PATCH 097/257] ARM: S3C2410: CPUFREQ: Add io-timing support.

Add io-timing support for frequency scaling on the S3C2410 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Kconfig            |   9 +
 arch/arm/plat-s3c24xx/Makefile           |   1 +
 arch/arm/plat-s3c24xx/s3c2410-iotiming.c | 432 +++++++++++++++++++++++
 3 files changed, 442 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2410-iotiming.c

diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5b0bc914f58..d82d30c2f05 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -107,6 +107,15 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
 
 # common code for s3c24xx based machines, such as the SMDKs.
 
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+	bool
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Internal node to select io timing code that is common to the s3c2410
+	  and s3c2440/s3c2442 cpu frequency support.
+
 config MACH_SMDK
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 1f6add552bd..6f9afd13ab4 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
+obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
 
 # device specific setup and/or initialisation
 obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
new file mode 100644
index 00000000000..26fe2129cf2
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -0,0 +1,432 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2410_print_timing - print bank timing data for debug purposes
+ * @pfx: The prefix to put on the output
+ * @timings: The timing inforamtion to print.
+*/
+static void s3c2410_print_timing(const char *pfx,
+				 struct s3c_iotimings *timings)
+{
+	struct s3c2410_iobank_timing *bt;
+	int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = timings->bank[bank].io_2410;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
+		       "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
+		       print_ns(bt->tacs),
+		       print_ns(bt->tcos),
+		       print_ns(bt->tacc),
+		       print_ns(bt->tcoh),
+		       print_ns(bt->tcah));
+	}
+}
+
+/**
+ * bank_reg - convert bank number to pointer to the control register.
+ * @bank: The IO bank number.
+ */
+static inline void __iomem *bank_reg(unsigned int bank)
+{
+	return S3C2410_BANKCON0 + (bank << 2);
+}
+
+/**
+ * bank_is_io - test whether bank is used for IO
+ * @bankcon: The bank control register.
+ *
+ * This is a simplistic test to see if any BANKCON[x] is not an IO
+ * bank. It currently does not take into account whether BWSCON has
+ * an illegal width-setting in it, or if the pin connected to nCS[x]
+ * is actually being handled as a chip-select.
+ */
+static inline int bank_is_io(unsigned long bankcon)
+{
+	return !(bankcon & S3C2410_BANKCON_SDRAM);
+}
+
+/**
+ * to_div - convert cycle time to divisor
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ *
+ * Convert the given cycle time into the divisor to use to obtain it from
+ * HCLK.
+*/
+static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
+{
+	if (cyc == 0)
+		return 0;
+
+	return DIV_ROUND_UP(cyc, hclk_tns);
+}
+
+/**
+ * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ * @shift: The shift to get to the control bits.
+ *
+ * Calculate the divisor, and turn it into the correct control bits to
+ * set in the result, @v.
+ */
+static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
+			      unsigned long *v, int shift)
+{
+	unsigned int div = to_div(cyc, hclk_tns);
+	unsigned long val;
+
+	s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
+		       __func__, cyc, hclk_tns, shift, div);
+
+	switch (div) {
+	case 0:
+		val = 0;
+		break;
+	case 1:
+		val = 1;
+		break;
+	case 2:
+		val = 2;
+		break;
+	case 3:
+	case 4:
+		val = 3;
+		break;
+	default:
+		return -1;
+	}
+
+	*v |= val << shift;
+	return 0;
+}
+
+int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+{
+	/* Currently no support for Tacp calculations. */
+	return 0;
+}
+
+/**
+ * calc_tacc - calculate divisor control for tacc.
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @nwait_en: IS nWAIT enabled for this bank.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ *
+ * Calculate the divisor control for tACC, taking into account whether
+ * the bank has nWAIT enabled. The result is used to modify the value
+ * pointed to by @v.
+*/
+static int calc_tacc(unsigned int cyc, int nwait_en,
+		     unsigned long hclk_tns, unsigned long *v)
+{
+	unsigned int div = to_div(cyc, hclk_tns);
+	unsigned long val;
+
+	s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
+		       __func__, cyc, nwait_en, hclk_tns, div);
+
+	/* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
+	if (nwait_en && div < 4)
+		div = 4;
+
+	switch (div) {
+	case 0:
+		val = 0;
+		break;
+
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+		val = div - 1;
+		break;
+
+	case 5:
+	case 6:
+		val = 4;
+		break;
+
+	case 7:
+	case 8:
+		val = 5;
+		break;
+
+	case 9:
+	case 10:
+		val = 6;
+		break;
+
+	case 11:
+	case 12:
+	case 13:
+	case 14:
+		val = 7;
+		break;
+
+	default:
+		return -1;
+	}
+
+	*v |= val << 8;
+	return 0;
+}
+
+/**
+ * s3c2410_calc_bank - calculate bank timing infromation
+ * @cfg: The configuration we need to calculate for.
+ * @bt: The bank timing information.
+ *
+ * Given the cycle timine for a bank @bt, calculate the new BANKCON
+ * setting for the @cfg timing. This updates the timing information
+ * ready for the cpu frequency change.
+ */
+static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2410_iobank_timing *bt)
+{
+	unsigned long hclk = cfg->freq.hclk_tns;
+	unsigned long res;
+	int ret;
+
+	res  = bt->bankcon;
+	res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
+
+	/* tacp: 2,3,4,5 */
+	/* tcah: 0,1,2,4 */
+	/* tcoh: 0,1,2,4 */
+	/* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
+	/* tcos: 0,1,2,4 */
+	/* tacs: 0,1,2,4 */
+
+	ret  = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
+	ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
+	ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
+	ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
+
+	if (ret)
+		return -EINVAL;
+
+	ret |= calc_tacp(bt->tacp, hclk, &res);
+	ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
+
+	if (ret)
+		return -EINVAL;
+
+	bt->bankcon = res;
+	return 0;
+}
+
+static unsigned int tacc_tab[] = {
+	[0]	= 1,
+	[1]	= 2,
+	[2]	= 3,
+	[3]	= 4,
+	[4]	= 6,
+	[5]	= 9,
+	[6]	= 10,
+	[7]	= 14,
+};
+
+/**
+ * get_tacc - turn tACC value into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_tacc(unsigned long hclk_tns,
+			     unsigned long val)
+{
+	val &= 7;
+	return hclk_tns * tacc_tab[val];
+}
+
+/**
+ * get_0124 - turn 0/1/2/4 divider into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_0124(unsigned long hclk_tns,
+			     unsigned long val)
+{
+	val &= 3;
+	return hclk_tns * ((val == 3) ? 4 : val);
+}
+
+/**
+ * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
+ * @cfg: The frequency configuration
+ * @bt: The bank timing to fill in (uses cached BANKCON)
+ *
+ * Given the BANKCON setting in @bt and the current frequency settings
+ * in @cfg, update the cycle timing information.
+ */
+void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+			      struct s3c2410_iobank_timing *bt)
+{
+	unsigned long bankcon = bt->bankcon;
+	unsigned long hclk = cfg->freq.hclk_tns;
+
+	bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+	bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+	bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+	bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+	bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+}
+
+/**
+ * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to fill out.
+ *
+ * Calculate the new values for the banks in @iot based on the new
+ * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
+ * to update the timing when necessary.
+ */
+int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2410_iobank_timing *bt;
+	unsigned long bankcon;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bankcon = __raw_readl(bank_reg(bank));
+		bt = iot->bank[bank].io_2410;
+
+		if (!bt)
+			continue;
+
+		bt->bankcon = bankcon;
+
+		ret = s3c2410_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+
+		s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
+			       __func__, bank, bt->bankcon);
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2410_iotiming_set - set the IO timings from the given setup.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to use.
+ *
+ * Set all the currently used IO bank timing information generated
+ * by s3c2410_iotiming_calc() once the core has validated that all
+ * the new values are within permitted bounds.
+ */
+void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2410_iobank_timing *bt;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2410;
+		if (!bt)
+			continue;
+
+		__raw_writel(bt->bankcon, bank_reg(bank));
+	}
+}
+
+/**
+ * s3c2410_iotiming_get - Get the timing information from current registers.
+ * @cfg: The frequency configuration
+ * @timings: The IO timing information to fill out.
+ *
+ * Calculate the @timings timing information from the current frequency
+ * information in @cfg, and the new frequency configur
+ * through all the IO banks, reading the state and then updating @iot
+ * as necessary.
+ *
+ * This is used at the moment on initialisation to get the current
+ * configuration so that boards do not have to carry their own setup
+ * if the timings are correct on initialisation.
+ */
+
+int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2410_iobank_timing *bt;
+	unsigned long bankcon;
+	unsigned long bwscon;
+	int bank;
+
+	bwscon = __raw_readl(S3C2410_BWSCON);
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bankcon = __raw_readl(bank_reg(bank));
+
+		if (!bank_is_io(bankcon))
+			continue;
+
+		s3c_freq_iodbg("%s: bank %d: con %08lx\n",
+			       __func__, bank, bankcon);
+
+		bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
+		if (!bt) {
+			printk(KERN_ERR "%s: no memory for bank\n", __func__);
+			return -ENOMEM;
+		}
+
+		/* find out in nWait is enabled for bank. */
+
+		if (bank != 0) {
+			unsigned long tmp  = S3C2410_BWSCON_GET(bwscon, bank);
+			if (tmp & S3C2410_BWSCON_WS)
+				bt->nwait_en = 1;
+		}
+
+		timings->bank[bank].io_2410 = bt;
+		bt->bankcon = bankcon;
+
+		s3c2410_iotiming_getbank(cfg, bt);
+	}
+
+	s3c2410_print_timing("get", timings);
+	return 0;
+}
-- 
GitLab


From a24c091db988551e2c350cfde9eb80ab6e791ffb Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:27 +0100
Subject: [PATCH 098/257] ARM: S3C2410: CPUFREQ: Add core support.

Add core support for frequency scaling on the S3C2410 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/Kconfig                 |  11 ++
 arch/arm/mach-s3c2410/Makefile                |   1 +
 arch/arm/mach-s3c2410/cpu-freq.c              | 157 ++++++++++++++++++
 arch/arm/plat-s3c24xx/Kconfig                 |   7 +
 arch/arm/plat-s3c24xx/Makefile                |   1 +
 arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c |  64 +++++++
 6 files changed, 241 insertions(+)
 create mode 100644 arch/arm/mach-s3c2410/cpu-freq.c
 create mode 100644 arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 41bb65d5b91..a7f70e18ccb 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -12,6 +12,7 @@ config CPU_S3C2410
 	select S3C2410_GPIO
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_PM if PM
+	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -45,6 +46,15 @@ config MACH_BAST_IDE
 	  Internal node for machines with an BAST style IDE
 	  interface
 
+# cpu frequency scaling support
+
+config S3C2410_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2410
+
 menu "S3C2410 Machines"
 
 config ARCH_SMDK2410
@@ -79,6 +89,7 @@ config MACH_N30
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
+	select S3C2410_IOTIMING if S3C2410_CPUFREQ
 	select PM_SIMTEC if PM
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index fca02f82711..cc25eb0eb2c 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
+obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
new file mode 100644
index 00000000000..f2cbdbab0df
--- /dev/null
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -0,0 +1,157 @@
+/* linux/arch/arm/mach-s3c2410/cpu-freq.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
+
+static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	u32 clkdiv = 0;
+
+	if (cfg->divs.h_divisor == 2)
+		clkdiv |= S3C2410_CLKDIVN_HDIVN;
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2410_CLKDIVN_PDIVN;
+
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long hclk, fclk, pclk;
+	unsigned int hdiv, pdiv;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	hclk_max = cfg->max.hclk;
+
+	cfg->freq.armclk = fclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
+		      __func__, fclk, hclk_max);
+
+	hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
+	hclk = fclk / hdiv;
+
+	if (hclk > cfg->max.hclk) {
+		s3c_freq_dbg("%s: hclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+	pclk = hclk / pdiv;
+
+	if (pclk > cfg->max.pclk) {
+		s3c_freq_dbg("%s: pclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv *= hdiv;
+
+	/* record the result */
+	cfg->divs.p_divisor = pdiv;
+	cfg->divs.h_divisor = hdiv;
+
+	return 0      ;
+}
+
+static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	/* transition latency is about 5ms worst-case, so
+	 * set 10ms to be sure */
+	.latency	= 10000000,
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 12,
+
+	.need_pll	= 1,
+
+	.name		= "s3c2410",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+	.resume_clocks	= s3c2410_setup_clocks,
+
+	.set_fvco	= s3c2410_set_fvco,
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2410_cpufreq_setdivs,
+	.calc_divs	= s3c2410_cpufreq_calcdivs,
+};
+
+static int s3c2410_cpufreq_add(struct sys_device *sysdev)
+{
+	return s3c_cpufreq_register(&s3c2410_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2410_cpufreq_driver = {
+	.add		= s3c2410_cpufreq_add,
+};
+
+static int __init s3c2410_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2410_sysclass,
+				      &s3c2410_cpufreq_driver);
+}
+
+arch_initcall(s3c2410_cpufreq_init);
+
+static int s3c2410a_cpufreq_add(struct sys_device *sysdev)
+{
+	/* alter the maximum freq settings for S3C2410A. If a board knows
+	 * it only has a maximum of 200, then it should register its own
+	 * limits. */
+
+	s3c2410_cpufreq_info.max.fclk = 266000000;
+	s3c2410_cpufreq_info.max.hclk = 133000000;
+	s3c2410_cpufreq_info.max.pclk =  66500000;
+	s3c2410_cpufreq_info.name = "s3c2410a";
+
+	return s3c2410_cpufreq_add(sysdev);
+}
+
+static struct sysdev_driver s3c2410a_cpufreq_driver = {
+	.add		= s3c2410a_cpufreq_add,
+};
+
+static int __init s3c2410a_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass,
+				      &s3c2410a_cpufreq_driver);
+}
+
+arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index d82d30c2f05..a547c79ed6c 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -116,6 +116,13 @@ config S3C2410_IOTIMING
 	  Internal node to select io timing code that is common to the s3c2410
 	  and s3c2440/s3c2442 cpu frequency support.
 
+config S3C2410_CPUFREQ_UTILS
+	bool
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Internal node to select timing code that is common to the s3c2410
+	  and s3c2440/s3c244 cpu frequency support.
+
 config MACH_SMDK
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 6f9afd13ab4..b28fe9cb0e5 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
 obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
new file mode 100644
index 00000000000..43ea80190d8
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
@@ -0,0 +1,64 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+/**
+ * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
+ * @cfg: The frequency configuration
+ *
+ * Set the SDRAM refresh value appropriately for the configured
+ * frequency.
+ */
+void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+	unsigned long refval;
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh = (1 << 11) + 1 - refresh;
+
+	s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
+
+	refval = __raw_readl(S3C2410_REFRESH);
+	refval &= ~((1 << 12) - 1);
+	refval |= refresh;
+	__raw_writel(refval, S3C2410_REFRESH);
+}
+
+/**
+ * s3c2410_set_fvco - set the PLL value
+ * @cfg: The frequency configuration
+ */
+void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
+{
+	__raw_writel(cfg->pll.index, S3C2410_MPLLCON);
+}
-- 
GitLab


From 438a09e1eb01c3f0d4cddde97ed9caae652f910b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:28 +0100
Subject: [PATCH 099/257] ARM: S3C2410: CPUFREQ: Add PLL table

Add PLL table for the S3C2410 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/Kconfig  |  7 +++
 arch/arm/mach-s3c2410/Makefile |  1 +
 arch/arm/mach-s3c2410/pll.c    | 95 ++++++++++++++++++++++++++++++++++
 3 files changed, 103 insertions(+)
 create mode 100644 arch/arm/mach-s3c2410/pll.c

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index a7f70e18ccb..d8c023d4df3 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -55,6 +55,13 @@ config S3C2410_CPUFREQ
 	help
 	  CPU Frequency scaling support for S3C2410
 
+config S3C2410_PLLTABLE
+	bool
+	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+	default y
+	help
+	  Select the PLL table for the S3C2410
+
 menu "S3C2410 Machines"
 
 config ARCH_SMDK2410
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index cc25eb0eb2c..2ab5ba4b266 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
 obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
+obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
new file mode 100644
index 00000000000..f178c2fd9d8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -0,0 +1,95 @@
+/* arch/arm/mach-s3c2410/pll.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2410 CPU PLL tables
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table pll_vals_12MHz[] = {
+    { .frequency = 34000000,  .index = PLLVAL(82, 2, 3),   },
+    { .frequency = 45000000,  .index = PLLVAL(82, 1, 3),   },
+    { .frequency = 51000000,  .index = PLLVAL(161, 3, 3),  },
+    { .frequency = 48000000,  .index = PLLVAL(120, 2, 3),  },
+    { .frequency = 56000000,  .index = PLLVAL(142, 2, 3),  },
+    { .frequency = 68000000,  .index = PLLVAL(82, 2, 2),   },
+    { .frequency = 79000000,  .index = PLLVAL(71, 1, 2),   },
+    { .frequency = 85000000,  .index = PLLVAL(105, 2, 2),  },
+    { .frequency = 90000000,  .index = PLLVAL(112, 2, 2),  },
+    { .frequency = 101000000, .index = PLLVAL(127, 2, 2),  },
+    { .frequency = 113000000, .index = PLLVAL(105, 1, 2),  },
+    { .frequency = 118000000, .index = PLLVAL(150, 2, 2),  },
+    { .frequency = 124000000, .index = PLLVAL(116, 1, 2),  },
+    { .frequency = 135000000, .index = PLLVAL(82, 2, 1),   },
+    { .frequency = 147000000, .index = PLLVAL(90, 2, 1),   },
+    { .frequency = 152000000, .index = PLLVAL(68, 1, 1),   },
+    { .frequency = 158000000, .index = PLLVAL(71, 1, 1),   },
+    { .frequency = 170000000, .index = PLLVAL(77, 1, 1),   },
+    { .frequency = 180000000, .index = PLLVAL(82, 1, 1),   },
+    { .frequency = 186000000, .index = PLLVAL(85, 1, 1),   },
+    { .frequency = 192000000, .index = PLLVAL(88, 1, 1),   },
+    { .frequency = 203000000, .index = PLLVAL(161, 3, 1),  },
+
+    /* 2410A extras */
+
+    { .frequency = 210000000, .index = PLLVAL(132, 2, 1),  },
+    { .frequency = 226000000, .index = PLLVAL(105, 1, 1),  },
+    { .frequency = 266000000, .index = PLLVAL(125, 1, 1),  },
+    { .frequency = 268000000, .index = PLLVAL(126, 1, 1),  },
+    { .frequency = 270000000, .index = PLLVAL(127, 1, 1),  },
+};
+
+static int s3c2410_plls_add(struct sys_device *dev)
+{
+	return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
+}
+
+static struct sysdev_driver s3c2410_plls_drv = {
+	.add	= s3c2410_plls_add,
+};
+
+static int __init s3c2410_pll_init(void)
+{
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_plls_drv);
+
+}
+
+arch_initcall(s3c2410_pll_init);
+
+static struct sysdev_driver s3c2410a_plls_drv = {
+	.add	= s3c2410_plls_add,
+};
+
+static int __init s3c2410a_pll_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_plls_drv);
+}
+
+arch_initcall(s3c2410a_pll_init);
-- 
GitLab


From 342e20f10294aca4097ae2a056c72a202221a75f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:29 +0100
Subject: [PATCH 100/257] ARM: S3C2440: CPUFREQ: Add core support.

Add core support for frequency scaling on the S3C2440 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Kconfig           |   8 +
 arch/arm/plat-s3c24xx/Makefile          |   1 +
 arch/arm/plat-s3c24xx/s3c2440-cpufreq.c | 309 ++++++++++++++++++++++++
 3 files changed, 318 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2440-cpufreq.c

diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index a547c79ed6c..feb9db8886b 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -34,6 +34,14 @@ config CPU_S3C244X
 	help
 	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
 
+config S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+	select S3C2410_CPUFREQ_UTILS
+	default y
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
 config S3C24XX_PWM
 	bool "PWM device support"
 	select HAVE_PWM
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index b28fe9cb0e5..b73f2e17b16 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
new file mode 100644
index 00000000000..c177a20319e
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -0,0 +1,309 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static inline int within_khz(unsigned long a, unsigned long b)
+{
+	long diff = a - b;
+
+	return (diff >= -1000 && diff <= 1000);
+}
+
+/**
+ * s3c2440_cpufreq_calcdivs - calculate divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Calcualte the divider values for the given frequency settings
+ * specified in @cfg. The values are stored in @cfg for later use
+ * by the relevant set routine if the request settings can be reached.
+ */
+int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv;
+	unsigned long hclk, fclk, armclk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
+		     __func__, fclk, armclk, hclk_max);
+
+	if (armclk > fclk) {
+		printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+		armclk = fclk;
+	}
+
+	/* if we are in DVS, we need HCLK to be <= ARMCLK */
+	if (armclk < fclk && armclk < hclk_max)
+		hclk_max = armclk;
+
+	for (hdiv = 1; hdiv < 9; hdiv++) {
+		if (hdiv == 5 || hdiv == 7)
+			hdiv++;
+
+		hclk = (fclk / hdiv);
+		if (hclk <= hclk_max || within_khz(hclk, hclk_max))
+			break;
+	}
+
+	s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
+
+	if (hdiv > 8)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* calculate a valid armclk */
+
+	if (armclk < hclk)
+		armclk = hclk;
+
+	/* if we're running armclk lower than fclk, this really means
+	 * that the system should go into dvs mode, which means that
+	 * armclk is connected to hclk. */
+	if (armclk < fclk) {
+		cfg->divs.dvs = 1;
+		armclk = hclk;
+	} else
+		cfg->divs.dvs = 0;
+
+	cfg->freq.armclk = armclk;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv;
+	cfg->divs.p_divisor = pdiv;
+
+	return 0;
+
+ invalid:
+	return -EINVAL;
+}
+
+#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
+			   S3C2440_CAMDIVN_HCLK4_HALF)
+
+/**
+ * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Set the divisors from the settings in @cfg, which where generated
+ * during the calculation phase by s3c2440_cpufreq_calcdivs().
+ */
+static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv, camdiv;
+
+	s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+		     cfg->divs.h_divisor, cfg->divs.p_divisor);
+
+	clkdiv = __raw_readl(S3C2410_CLKDIVN);
+	camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+	clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
+	camdiv &= ~CAMDIVN_HCLK_HALF;
+
+	switch (cfg->divs.h_divisor) {
+	case 1:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
+		break;
+
+	case 2:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
+		break;
+
+	case 6:
+		camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
+	case 3:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
+		break;
+
+	case 8:
+		camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
+	case 4:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
+		break;
+
+	default:
+		BUG();	/* we don't expect to get here. */
+	}
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2440_CLKDIVN_PDIVN;
+
+	/* todo - set pclk. */
+
+	/* Write the divisors first with hclk intentionally halved so that
+	 * when we write clkdiv we will under-frequency instead of over. We
+	 * then make a short delay and remove the hclk halving if necessary.
+	 */
+
+	__raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	ndelay(20);
+	__raw_writel(camdiv, S3C2440_CAMDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
+			int *divs,
+			struct cpufreq_frequency_table *table,
+			size_t table_size)
+{
+	unsigned long freq;
+	int index = 0;
+	int div;
+
+	for (div = *divs; div > 0; div = *divs++) {
+		freq = fclk / div;
+
+		if (freq > max_hclk && div != 1)
+			continue;
+
+		freq /= 1000; /* table is in kHz */
+		index = s3c_cpufreq_addfreq(table, index, table_size, freq);
+		if (index < 0)
+			break;
+	}
+
+	return index;
+}
+
+static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
+
+static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
+				     struct cpufreq_frequency_table *table,
+				     size_t table_size)
+{
+	int ret;
+
+	WARN_ON(cfg->info == NULL);
+	WARN_ON(cfg->board == NULL);
+
+	ret = run_freq_for(cfg->info->max.hclk,
+			   cfg->info->max.fclk,
+			   hclk_divs,
+			   table, table_size);
+
+	s3c_freq_dbg("%s: returning %d\n", __func__, ret);
+
+	return ret;
+}
+
+struct s3c_cpufreq_info s3c2440_cpufreq_info = {
+	.max		= {
+		.fclk	= 400000000,
+		.hclk	= 133333333,
+		.pclk	=  66666666,
+	},
+
+	.locktime_m	= 300,
+	.locktime_u	= 300,
+	.locktime_bits	= 16,
+
+	.name		= "s3c244x",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+	.set_fvco	= s3c2410_set_fvco,
+
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2440_cpufreq_setdivs,
+	.calc_divs	= s3c2440_cpufreq_calcdivs,
+	.calc_freqtable	= s3c2440_cpufreq_calctable,
+
+	.resume_clocks	= s3c244x_setup_clocks,
+};
+
+static int s3c2440_cpufreq_add(struct sys_device *sysdev)
+{
+	xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+	hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+	fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+	armclk = s3c_cpufreq_clk_get(NULL, "armclk");
+
+	if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
+		printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+		return -ENOENT;
+	}
+
+	return s3c_cpufreq_register(&s3c2440_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2440_cpufreq_driver = {
+	.add		= s3c2440_cpufreq_add,
+};
+
+static int s3c2440_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass,
+				      &s3c2440_cpufreq_driver);
+}
+
+/* arch_initcall adds the clocks we need, so use subsys_initcall. */
+subsys_initcall(s3c2440_cpufreq_init);
+
+static struct sysdev_driver s3c2442_cpufreq_driver = {
+	.add		= s3c2440_cpufreq_add,
+};
+
+static int s3c2442_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass,
+				      &s3c2442_cpufreq_driver);
+}
+
+subsys_initcall(s3c2442_cpufreq_init);
-- 
GitLab


From 78278d6a9673b487d8229dd430cacdf9964c0d3f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:30 +0100
Subject: [PATCH 101/257] ARM: S3C2440: CPUFREQ: Add PLL tables

Add PLL tables for the S3C2440.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Kconfig                |  14 ++
 arch/arm/plat-s3c24xx/Makefile               |   3 +
 arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c |  97 ++++++++++++++
 arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c | 127 +++++++++++++++++++
 4 files changed, 241 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
 create mode 100644 arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c

diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index feb9db8886b..9c449c048c7 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -42,6 +42,20 @@ config S3C2440_CPUFREQ
 	help
 	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
 
+config S3C2440_PLL_12000000
+	bool
+	depends on S3C2440_CPUFREQ
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+	bool
+	depends on S3C2440_CPUFREQ
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 config S3C24XX_PWM
 	bool "PWM device support"
 	select HAVE_PWM
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index b73f2e17b16..c60317b3491 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -28,6 +28,9 @@ obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
 obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
new file mode 100644
index 00000000000..ff9443b233a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -0,0 +1,97 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+	{ .frequency = 75000000,	.index = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
+	{ .frequency = 80000000,	.index = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
+	{ .frequency = 90000000,	.index = PLLVAL(0x70, 2, 3),  }, 	/* FVco 720.000000 */
+	{ .frequency = 100000000,	.index = PLLVAL(0x5c, 1, 3),  }, 	/* FVco 800.000000 */
+	{ .frequency = 110000000,	.index = PLLVAL(0x66, 1, 3),  }, 	/* FVco 880.000000 */
+	{ .frequency = 120000000,	.index = PLLVAL(0x70, 1, 3),  }, 	/* FVco 960.000000 */
+	{ .frequency = 150000000,	.index = PLLVAL(0x75, 3, 2),  }, 	/* FVco 600.000000 */
+	{ .frequency = 160000000,	.index = PLLVAL(0x98, 4, 2),  }, 	/* FVco 640.000000 */
+	{ .frequency = 170000000,	.index = PLLVAL(0x4d, 1, 2),  }, 	/* FVco 680.000000 */
+	{ .frequency = 180000000,	.index = PLLVAL(0x70, 2, 2),  }, 	/* FVco 720.000000 */
+	{ .frequency = 190000000,	.index = PLLVAL(0x57, 1, 2),  }, 	/* FVco 760.000000 */
+	{ .frequency = 200000000,	.index = PLLVAL(0x5c, 1, 2),  }, 	/* FVco 800.000000 */
+	{ .frequency = 210000000,	.index = PLLVAL(0x84, 2, 2),  }, 	/* FVco 840.000000 */
+	{ .frequency = 220000000,	.index = PLLVAL(0x66, 1, 2),  }, 	/* FVco 880.000000 */
+	{ .frequency = 230000000,	.index = PLLVAL(0x6b, 1, 2),  }, 	/* FVco 920.000000 */
+	{ .frequency = 240000000,	.index = PLLVAL(0x70, 1, 2),  }, 	/* FVco 960.000000 */
+	{ .frequency = 300000000,	.index = PLLVAL(0x75, 3, 1),  }, 	/* FVco 600.000000 */
+	{ .frequency = 310000000,	.index = PLLVAL(0x93, 4, 1),  }, 	/* FVco 620.000000 */
+	{ .frequency = 320000000,	.index = PLLVAL(0x98, 4, 1),  }, 	/* FVco 640.000000 */
+	{ .frequency = 330000000,	.index = PLLVAL(0x66, 2, 1),  }, 	/* FVco 660.000000 */
+	{ .frequency = 340000000,	.index = PLLVAL(0x4d, 1, 1),  }, 	/* FVco 680.000000 */
+	{ .frequency = 350000000,	.index = PLLVAL(0xa7, 4, 1),  }, 	/* FVco 700.000000 */
+	{ .frequency = 360000000,	.index = PLLVAL(0x70, 2, 1),  }, 	/* FVco 720.000000 */
+	{ .frequency = 370000000,	.index = PLLVAL(0xb1, 4, 1),  }, 	/* FVco 740.000000 */
+	{ .frequency = 380000000,	.index = PLLVAL(0x57, 1, 1),  }, 	/* FVco 760.000000 */
+	{ .frequency = 390000000,	.index = PLLVAL(0x7a, 2, 1),  }, 	/* FVco 780.000000 */
+	{ .frequency = 400000000,	.index = PLLVAL(0x5c, 1, 1),  }, 	/* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct sys_device *dev)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 12000000) {
+		printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_12,
+					   ARRAY_SIZE(s3c2440_plls_12));
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_plls12_drv = {
+	.add	= s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
+
+}
+
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct sysdev_driver s3c2442_plls12_drv = {
+	.add	= s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
+
+}
+
+arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
new file mode 100644
index 00000000000..7679af13a94
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+ *
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+	{ .frequency = 78019200,	.index = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 84067200,	.index = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 90115200,	.index = PLLVAL(141, 5, 3), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 96163200,	.index = PLLVAL(151, 5, 3), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 102135600,	.index = PLLVAL(185, 6, 3), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 108259200,	.index = PLLVAL(171, 5, 3), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 114307200,	.index = PLLVAL(127, 3, 3), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 120234240,	.index = PLLVAL(134, 3, 3), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 126161280,	.index = PLLVAL(141, 3, 3), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 132088320,	.index = PLLVAL(148, 3, 3), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 138015360,	.index = PLLVAL(155, 3, 3), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 144789120,	.index = PLLVAL(163, 3, 3), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 150100363,	.index = PLLVAL(187, 9, 2), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 156038400,	.index = PLLVAL(121, 5, 2), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 162086400,	.index = PLLVAL(126, 5, 2), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 168134400,	.index = PLLVAL(131, 5, 2), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 174048000,	.index = PLLVAL(177, 7, 2), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 180230400,	.index = PLLVAL(141, 5, 2), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 186278400,	.index = PLLVAL(124, 4, 2), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 192326400,	.index = PLLVAL(151, 5, 2), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 198132480,	.index = PLLVAL(109, 3, 2), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 204271200,	.index = PLLVAL(185, 6, 2), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 210268800,	.index = PLLVAL(141, 4, 2), 	}, 	/* FVco 841.075200 */
+	{ .frequency = 216518400,	.index = PLLVAL(171, 5, 2), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 222264000,	.index = PLLVAL(97, 2, 2), 	}, 	/* FVco 889.056000 */
+	{ .frequency = 228614400,	.index = PLLVAL(127, 3, 2), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 234259200,	.index = PLLVAL(158, 4, 2), 	}, 	/* FVco 937.036800 */
+	{ .frequency = 240468480,	.index = PLLVAL(134, 3, 2), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 246960000,	.index = PLLVAL(167, 4, 2), 	}, 	/* FVco 987.840000 */
+	{ .frequency = 252322560,	.index = PLLVAL(141, 3, 2), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 258249600,	.index = PLLVAL(114, 2, 2), 	}, 	/* FVco 1032.998400 */
+	{ .frequency = 264176640,	.index = PLLVAL(148, 3, 2), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 270950400,	.index = PLLVAL(120, 2, 2), 	}, 	/* FVco 1083.801600 */
+	{ .frequency = 276030720,	.index = PLLVAL(155, 3, 2), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 282240000,	.index = PLLVAL(92, 1, 2), 	}, 	/* FVco 1128.960000 */
+	{ .frequency = 289578240,	.index = PLLVAL(163, 3, 2), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 294235200,	.index = PLLVAL(131, 2, 2), 	}, 	/* FVco 1176.940800 */
+	{ .frequency = 300200727,	.index = PLLVAL(187, 9, 1), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 306358690,	.index = PLLVAL(191, 9, 1), 	}, 	/* FVco 612.717380 */
+	{ .frequency = 312076800,	.index = PLLVAL(121, 5, 1), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 318366720,	.index = PLLVAL(86, 3, 1), 	}, 	/* FVco 636.733440 */
+	{ .frequency = 324172800,	.index = PLLVAL(126, 5, 1), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 330220800,	.index = PLLVAL(109, 4, 1), 	}, 	/* FVco 660.441600 */
+	{ .frequency = 336268800,	.index = PLLVAL(131, 5, 1), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 342074880,	.index = PLLVAL(93, 3, 1), 	}, 	/* FVco 684.149760 */
+	{ .frequency = 348096000,	.index = PLLVAL(177, 7, 1), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 355622400,	.index = PLLVAL(118, 4, 1), 	}, 	/* FVco 711.244800 */
+	{ .frequency = 360460800,	.index = PLLVAL(141, 5, 1), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 366206400,	.index = PLLVAL(165, 6, 1), 	}, 	/* FVco 732.412800 */
+	{ .frequency = 372556800,	.index = PLLVAL(124, 4, 1), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 378201600,	.index = PLLVAL(126, 4, 1), 	}, 	/* FVco 756.403200 */
+	{ .frequency = 384652800,	.index = PLLVAL(151, 5, 1), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 391608000,	.index = PLLVAL(177, 6, 1), 	}, 	/* FVco 783.216000 */
+	{ .frequency = 396264960,	.index = PLLVAL(109, 3, 1), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 402192000,	.index = PLLVAL(87, 2, 1), 	}, 	/* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct sys_device *dev)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 169344000) {
+		printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_169344,
+					   ARRAY_SIZE(s3c2440_plls_169344));
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_plls169344_drv = {
+	.add	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass,
+				      &s3c2440_plls169344_drv);
+
+}
+
+arch_initcall(s3c2440_pll_16934400);
+
+static struct sysdev_driver s3c2442_plls169344_drv = {
+	.add	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass,
+				      &s3c2442_plls169344_drv);
+
+}
+
+arch_initcall(s3c2442_pll_16934400);
-- 
GitLab


From 0345b51c6a4bfaf6c066b8055d02116432b6a0c9 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:31 +0100
Subject: [PATCH 102/257] ARM: S3C2440: CPUFREQ: Add crystal frequency Kconfig
 entries.

Add entries to select the crystal to select for each different
supported board. This information is then available for anything
else requiring this, such as the CPUFreq PLL tables.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/Kconfig |  6 ++++++
 arch/arm/plat-s3c24xx/Kconfig | 16 ++++++++++++++--
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8cfeaec3730..3cb12e39e0a 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
 	select PM_SIMTEC if PM
 	select HAVE_PATA_PLATFORM
 	select S3C24XX_GPIO_EXTRA64
+	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
@@ -44,6 +45,7 @@ config MACH_OSIRIS
 	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
 	select S3C24XX_GPIO_EXTRA128
+	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
@@ -52,6 +54,7 @@ config MACH_OSIRIS
 config MACH_RX3715
 	bool "HP iPAQ rx3715"
 	select CPU_S3C2440
+	select S3C2440_XTAL_16934400
 	select PM_H1940 if PM
 	help
 	  Say Y here if you are using the HP iPAQ rx3715.
@@ -59,6 +62,7 @@ config MACH_RX3715
 config ARCH_S3C2440
 	bool "SMDK2440"
 	select CPU_S3C2440
+	select S3C2440_XTAL_16934400
 	select MACH_SMDK
 	select S3C_DEV_USB_HOST
 	help
@@ -67,6 +71,7 @@ config ARCH_S3C2440
 config MACH_NEXCODER_2440
  	bool "NexVision NEXCODER 2440 Light Board"
  	select CPU_S3C2440
+	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
@@ -75,6 +80,7 @@ config SMDK2440_CPU2440
 	bool "SMDK2440 with S3C2440 CPU module"
 	depends on ARCH_S3C2440
 	default y if ARCH_S3C2440
+	select S3C2440_XTAL_16934400
 	select CPU_S3C2440
 
 config MACH_AT2440EVB
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 9c449c048c7..ec9921b6848 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -42,16 +42,28 @@ config S3C2440_CPUFREQ
 	help
 	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
 
+config S3C2440_XTAL_12000000
+	bool
+	help
+	  Indicate that the build needs to support 12MHz system
+	  crystal.
+
+config S3C2440_XTAL_16934400
+	bool
+	help
+	  Indicate that the build needs to support 16.9344MHz system
+	  crystal.
+
 config S3C2440_PLL_12000000
 	bool
-	depends on S3C2440_CPUFREQ
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
 	default y if CPU_FREQ_S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
 
 config S3C2440_PLL_16934400
 	bool
-	depends on S3C2440_CPUFREQ
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
 	default y if CPU_FREQ_S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-- 
GitLab


From baf6b281cfa7259ab2d1148b879850f699520bc6 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:32 +0100
Subject: [PATCH 103/257] ARM: OSIRIS: CPUFREQ: Add CPU frequency scaling
 support

Add CPU frequency scalling support to the Simtec Osiris.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/Kconfig       | 1 +
 arch/arm/mach-s3c2440/mach-osiris.c | 9 +++++++++
 2 files changed, 10 insertions(+)

diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 3cb12e39e0a..8ae1b288f7f 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -46,6 +46,7 @@ config MACH_OSIRIS
 	select PM_SIMTEC if PM
 	select S3C24XX_GPIO_EXTRA128
 	select S3C2440_XTAL_12000000
+	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index cba064b49a6..2105a41281a 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -34,6 +34,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
+#include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
@@ -351,6 +352,12 @@ static struct clk *osiris_clocks[] __initdata = {
 	&s3c24xx_uclk,
 };
 
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+	.refresh	= 7800, /* refresh period is 7.8usec */
+	.auto_io	= 1,
+	.need_io	= 1,
+};
+
 static void __init osiris_map_io(void)
 {
 	unsigned long flags;
@@ -402,6 +409,8 @@ static void __init osiris_init(void)
 
 	s3c_i2c0_set_platdata(NULL);
 
+	s3c_cpufreq_setboard(&osiris_cpufreq);
+
 	i2c_register_board_info(0, osiris_i2c_devs,
 				ARRAY_SIZE(osiris_i2c_devs));
 
-- 
GitLab


From 22d4239973bbd3738b3cfe6048c55f885f3f6256 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:33 +0100
Subject: [PATCH 104/257] ARM: S3C2412: CPUFREQ: Add core support.

Add core support for frequency scaling on the S3C2412 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2412/Kconfig    |   6 +
 arch/arm/mach-s3c2412/Makefile   |   1 +
 arch/arm/mach-s3c2412/cpu-freq.c | 251 +++++++++++++++++++++++++++++++
 3 files changed, 258 insertions(+)
 create mode 100644 arch/arm/mach-s3c2412/cpu-freq.c

diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 63586ffd0ae..79e18340e07 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -32,6 +32,12 @@ config S3C2412_PM
 	help
 	  Internal config node to apply S3C2412 power management
 
+config S3C2412_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+	default y
+	help
+	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
 
 menu "S3C2412 Machines"
 
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 20918d5dc6a..530ec46cbae 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2412)	+= clock.o
 obj-$(CONFIG_CPU_S3C2412)	+= gpio.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma.o
 obj-$(CONFIG_S3C2412_PM)	+= pm.o sleep.o
+obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpu-freq.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
new file mode 100644
index 00000000000..80b20c33447
--- /dev/null
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -0,0 +1,251 @@
+/* linux/arch/arm/mach-s3c2412/cpu-freq.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 CPU Frequency scalling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* our clock resources. */
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv, armdiv, dvs;
+	unsigned long hclk, fclk, armclk, armdiv_clk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	/* We can't run hclk above armclk as at the best we have to
+	 * have armclk and hclk in dvs mode. */
+
+	if (hclk_max > armclk)
+		hclk_max = armclk;
+
+	s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
+		     __func__, fclk, armclk, hclk_max);
+	s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
+		     __func__, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->freq.pclk);
+
+	armdiv = fclk / armclk;
+
+	if (armdiv < 1)
+		armdiv = 1;
+	if (armdiv > 2)
+		armdiv = 2;
+
+	cfg->divs.arm_divisor = armdiv;
+	armdiv_clk = fclk / armdiv;
+
+	hdiv = armdiv_clk / hclk_max;
+	if (hdiv < 1)
+		hdiv = 1;
+
+	cfg->freq.hclk = hclk = armdiv_clk / hdiv;
+
+	/* set dvs depending on whether we reached armclk or not. */
+	cfg->divs.dvs = dvs = armclk < armdiv_clk;
+
+	/* update the actual armclk we achieved. */
+	cfg->freq.armclk = dvs ? hclk : armdiv_clk;
+
+	s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
+		     __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
+
+	if (hdiv > 4)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	cfg->freq.pclk = hclk / pdiv;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv * armdiv;
+	cfg->divs.p_divisor = pdiv * armdiv;
+
+	return 0;
+
+ invalid:
+	return -EINVAL;
+}
+
+static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv;
+	unsigned long olddiv;
+
+	olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+
+	/* clear off current clock info */
+
+	clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
+	clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
+	clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
+
+	if (cfg->divs.arm_divisor == 2)
+		clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
+
+	clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2412_CLKDIVN_PDIVN;
+
+	s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+
+	s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
+		     board->refresh, cfg->freq.hclk);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * by 10 each to ensure that we do not overflow 32 bit numbers. This
+	 * should work for HCLK up to 133MHz and refresh period up to 30usec.
+	 */
+
+	refresh = (board->refresh / 10);
+	refresh *= (cfg->freq.hclk / 100);
+	refresh /= (1 * 1000 * 1000);	/* 10^6 */
+
+	s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
+
+/* set the default cpu frequency information, based on an 200MHz part
+ * as we have no other way of detecting the speed rating in software.
+ */
+
+static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	.latency	= 5000000, /* 5ms */
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 16,
+
+	.name		= "s3c2412",
+	.set_refresh	= s3c2412_cpufreq_setrefresh,
+	.set_divs	= s3c2412_cpufreq_setdivs,
+	.calc_divs	= s3c2412_cpufreq_calcdivs,
+
+	.resume_clocks	= s3c2412_setup_clocks,
+};
+
+static int s3c2412_cpufreq_add(struct sys_device *sysdev)
+{
+	unsigned long fclk_rate;
+
+	hclk = clk_get(NULL, "hclk");
+	if (IS_ERR(hclk)) {
+		printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+		return -ENOENT;
+	}
+
+	fclk = clk_get(NULL, "fclk");
+	if (IS_ERR(fclk)) {
+		printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+		goto err_fclk;
+	}
+
+	fclk_rate = clk_get_rate(fclk);
+	if (fclk_rate > 200000000) {
+		printk(KERN_INFO
+		       "%s: fclk %ld MHz, assuming 266MHz capable part\n",
+		       __func__, fclk_rate / 1000000);
+		s3c2412_cpufreq_info.max.fclk = 266000000;
+		s3c2412_cpufreq_info.max.hclk = 133000000;
+		s3c2412_cpufreq_info.max.pclk =  66000000;
+	}
+
+	armclk = clk_get(NULL, "armclk");
+	if (IS_ERR(armclk)) {
+		printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+		goto err_armclk;
+	}
+
+	xtal = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal)) {
+		printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+		goto err_xtal;
+	}
+
+	return s3c_cpufreq_register(&s3c2412_cpufreq_info);
+
+err_xtal:
+	clk_put(armclk);
+err_armclk:
+	clk_put(fclk);
+err_fclk:
+	clk_put(hclk);
+
+	return -ENOENT;
+}
+
+static struct sysdev_driver s3c2412_cpufreq_driver = {
+	.add		= s3c2412_cpufreq_add,
+};
+
+static int s3c2412_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2412_sysclass,
+				      &s3c2412_cpufreq_driver);
+}
+
+arch_initcall(s3c2412_cpufreq_init);
-- 
GitLab


From 78ddb2785980fc01b129c3547463266cae9c6ca9 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:34 +0100
Subject: [PATCH 105/257] ARM: PL093: Header file for PL093 SSMC PrimeCell

Header to define the standard registers for an
PL093 SSMC memory controller.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 include/linux/amba/pl093.h | 80 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 include/linux/amba/pl093.h

diff --git a/include/linux/amba/pl093.h b/include/linux/amba/pl093.h
new file mode 100644
index 00000000000..2983e3671ad
--- /dev/null
+++ b/include/linux/amba/pl093.h
@@ -0,0 +1,80 @@
+/* linux/amba/pl093.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * AMBA PL093 SSMC (synchronous static memory controller)
+ *  See DDI0236.pdf (r0p4) for more details
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define SMB_BANK(x)	((x) * 0x20) /* each bank control set is 0x20 apart */
+
+/* Offsets for SMBxxxxRy registers */
+
+#define SMBIDCYR	(0x00)
+#define SMBWSTRDR	(0x04)
+#define SMBWSTWRR	(0x08)
+#define SMBWSTOENR	(0x0C)
+#define SMBWSTWENR	(0x10)
+#define SMBCR		(0x14)
+#define SMBSR		(0x18)
+#define SMBWSTBRDR	(0x1C)
+
+/* Masks for SMB registers */
+#define IDCY_MASK	(0xf)
+#define WSTRD_MASK	(0xf)
+#define WSTWR_MASK	(0xf)
+#define WSTOEN_MASK	(0xf)
+#define WSTWEN_MASK	(0xf)
+
+/* Notes from datasheet:
+ *	WSTOEN <= WSTRD
+ *	WSTWEN <= WSTWR
+ *
+ * WSTOEN is not used with nWAIT
+ */
+
+/* SMBCR bit definitions */
+#define SMBCR_BIWRITEEN		(1 << 21)
+#define SMBCR_ADDRVALIDWRITEEN	(1 << 20)
+#define SMBCR_SYNCWRITE		(1 << 17)
+#define SMBCR_BMWRITE		(1 << 16)
+#define SMBCR_WRAPREAD		(1 << 14)
+#define SMBCR_BIREADEN		(1 << 13)
+#define SMBCR_ADDRVALIDREADEN	(1 << 12)
+#define SMBCR_SYNCREAD		(1 << 9)
+#define SMBCR_BMREAD		(1 << 8)
+#define SMBCR_SMBLSPOL		(1 << 6)
+#define SMBCR_WP		(1 << 3)
+#define SMBCR_WAITEN		(1 << 2)
+#define SMBCR_WAITPOL		(1 << 1)
+#define SMBCR_RBLE		(1 << 0)
+
+#define SMBCR_BURSTLENWRITE_MASK	(3 << 18)
+#define SMBCR_BURSTLENWRITE_4		(0 << 18)
+#define SMBCR_BURSTLENWRITE_8		(1 << 18)
+#define SMBCR_BURSTLENWRITE_RESERVED	(2 << 18)
+#define SMBCR_BURSTLENWRITE_CONTINUOUS	(3 << 18)
+
+#define SMBCR_BURSTLENREAD_MASK		(3 << 10)
+#define SMBCR_BURSTLENREAD_4		(0 << 10)
+#define SMBCR_BURSTLENREAD_8		(1 << 10)
+#define SMBCR_BURSTLENREAD_16		(2 << 10)
+#define SMBCR_BURSTLENREAD_CONTINUOUS	(3 << 10)
+
+#define SMBCR_MW_MASK			(3 << 4)
+#define SMBCR_MW_8BIT			(0 << 4)
+#define SMBCR_MW_16BIT			(1 << 4)
+#define SMBCR_MW_M32BIT			(2 << 4)
+
+/* SSMC status registers */
+#define SSMCCSR		(0x200)
+#define SSMCCR		(0x204)
+#define SSMCITCR	(0x208)
+#define SSMCITIP	(0x20C)
+#define SSMCITIOP	(0x210)
-- 
GitLab


From e13cf03eaae3792442c401860910d40f33c89a33 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:35 +0100
Subject: [PATCH 106/257] ARM: S3C: Update CPU register mapping practices.

Currently map-base.h defines the main virtual address mappings made
for all the support S3C SoC series, but does not then define any base
for per-cpu mappings to be made from.

Add S3C_ADDR_CPU() macro to define an virtual address as an offset
from the last of the core mappings.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h  | 4 ++--
 arch/arm/plat-s3c/include/plat/map-base.h | 8 +++++++-
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d3..e02e6c38a39 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -49,7 +49,7 @@
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
 #define S3C64XX_PA_GPIO		(0x7F008000)
-#define S3C64XX_VA_GPIO		S3C_ADDR(0x00500000)
+#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
 #define S3C64XX_SZ_GPIO		SZ_4K
 
 #define S3C64XX_PA_SDRAM	(0x50000000)
@@ -57,7 +57,7 @@
 #define S3C64XX_PA_VIC1		(0x71300000)
 
 #define S3C64XX_PA_MODEM	(0x74108000)
-#define S3C64XX_VA_MODEM	S3C_ADDR(0x00600000)
+#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
 
 #define S3C64XX_PA_USBHOST	(0x74300000)
 
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-s3c/include/plat/map-base.h
index b84289d32a5..250be311c85 100644
--- a/arch/arm/plat-s3c/include/plat/map-base.h
+++ b/arch/arm/plat-s3c/include/plat/map-base.h
@@ -32,9 +32,15 @@
 
 #define S3C_VA_IRQ	S3C_ADDR(0x00000000)	/* irq controller(s) */
 #define S3C_VA_SYS	S3C_ADDR(0x00100000)	/* system control */
-#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* system control */
+#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* memory control */
 #define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
 #define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
 #define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
 
+/* This is used for the CPU specific mappings that may be needed, so that
+ * they do not need to directly used S3C_ADDR() and thus make it easier to
+ * modify the space for mapping.
+ */
+#define S3C_ADDR_CPU(x)	S3C_ADDR(0x00500000 + (x))
+
 #endif /* __ASM_PLAT_MAP_H */
-- 
GitLab


From 25400036867fa7a135fca17810555400d176acaa Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:36 +0100
Subject: [PATCH 107/257] ARM: S3C2412: Update memory register mapping and
 definitions

Update the mapping of the memory controler registers and
add the missing definitions of the register block for the
SSMC.

The register contents definitions can be found in the pl093
header.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/map.h      |  7 ++++++
 .../include/mach/regs-s3c2412-mem.h           | 23 +++++++++++++++++--
 arch/arm/mach-s3c2412/s3c2412.c               | 12 ++++++++++
 3 files changed, 40 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index e99b212cb1c..11cce097550 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -67,6 +67,13 @@
 #define S3C2443_PA_HSMMC   (0x4A800000)
 #define S3C2443_SZ_HSMMC   (256)
 
+/* S3C2412 memory and IO controls */
+#define S3C2412_PA_SSMC	(0x4F000000)
+#define S3C2412_VA_SSMC	S3C_ADDR_CPU(0x00000000)
+
+#define S3C2412_PA_EBI	(0x48800000)
+#define S3C2412_VA_EBI	S3C_ADDR_CPU(0x00010000)
+
 /* physical addresses of all the chip-select areas */
 
 #define S3C2410_CS0 (0x00000000)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
index a4bf2712317..fb635251509 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -14,9 +14,11 @@
 #ifndef __ASM_ARM_REGS_S3C2412_MEM
 #define __ASM_ARM_REGS_S3C2412_MEM
 
-#ifndef S3C2412_MEMREG
 #define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
+#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
 
 #define S3C2412_BANKCFG			S3C2412_MEMREG(0x00)
 #define S3C2412_BANKCON1		S3C2412_MEMREG(0x04)
@@ -26,4 +28,21 @@
 #define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
 #define S3C2412_TIMEOUT			S3C2412_MEMREG(0x14)
 
+/* EBI control registers */
+
+#define S3C2412_EBI_PR			S3C2412_EBIREG(0x00)
+#define S3C2412_EBI_BANKCFG		S3C2412_EBIREG(0x04)
+
+/* SSMC control registers */
+
+#define S3C2412_SSMC_BANK(x)		S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMIDCYR(x)		S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMBWSTRD(x)		S3C2412_SSMC(x, 0x04)
+#define S3C2412_SMBWSTWRR(x)		S3C2412_SSMC(x, 0x08)
+#define S3C2412_SMBWSTOENR(x)		S3C2412_SSMC(x, 0x0C)
+#define S3C2412_SMBWSTWENR(x)		S3C2412_SSMC(x, 0x10)
+#define S3C2412_SMBCR(x)		S3C2412_SSMC(x, 0x14)
+#define S3C2412_SMBSR(x)		S3C2412_SSMC(x, 0x18)
+#define S3C2412_SMBWSTBRDR(x)		S3C2412_SSMC(x, 0x1C)
+
 #endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 5b5aba69ec3..bef39f77729 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -69,6 +69,18 @@ static struct map_desc s3c2412_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
 	IODESC_ENT(TIMER),
 	IODESC_ENT(WATCHDOG),
+	{
+		.virtual = (unsigned long)S3C2412_VA_SSMC,
+		.pfn	 = __phys_to_pfn(S3C2412_PA_SSMC),
+		.length	 = SZ_1M,
+		.type	 = MT_DEVICE,
+	},
+	{
+		.virtual = (unsigned long)S3C2412_VA_EBI,
+		.pfn	 = __phys_to_pfn(S3C2412_PA_EBI),
+		.length	 = SZ_1M,
+		.type	 = MT_DEVICE,
+	},
 };
 
 /* uart registration process */
-- 
GitLab


From 140780ab5a2bc04ccff77337c3a27f3b44182a91 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:37 +0100
Subject: [PATCH 108/257] ARM: S3C24XX: CPUFREQ: S3C2412/S3C2443 IO timing
 support

Add IO bank timing support for S3C2412/S3C2443.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2412/Kconfig                 |   3 +
 arch/arm/mach-s3c2412/cpu-freq.c              |   4 +
 arch/arm/plat-s3c24xx/Kconfig                 |   9 +
 arch/arm/plat-s3c24xx/Makefile                |   1 +
 .../plat-s3c24xx/include/plat/cpu-freq-core.h |  52 +++-
 arch/arm/plat-s3c24xx/s3c2412-iotiming.c      | 261 ++++++++++++++++++
 6 files changed, 329 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2412-iotiming.c

diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 79e18340e07..35c1bde89cf 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -32,9 +32,12 @@ config S3C2412_PM
 	help
 	  Internal config node to apply S3C2412 power management
 
+# Note, the S3C2412 IOtiming support is in plat-s3c24xx
+
 config S3C2412_CPUFREQ
 	bool
 	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+	select S3C2412_IOTIMING
 	default y
 	help
 	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
index 80b20c33447..21a66178d9b 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -185,6 +185,10 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
 	.set_divs	= s3c2412_cpufreq_setdivs,
 	.calc_divs	= s3c2412_cpufreq_calcdivs,
 
+	.calc_iotiming	= s3c2412_iotiming_calc,
+	.set_iotiming	= s3c2412_iotiming_set,
+	.get_iotiming	= s3c2412_iotiming_get,
+
 	.resume_clocks	= s3c2412_setup_clocks,
 };
 
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index ec9921b6848..f0b9c73fe00 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -157,6 +157,15 @@ config S3C2410_CPUFREQ_UTILS
 	  Internal node to select timing code that is common to the s3c2410
 	  and s3c2440/s3c244 cpu frequency support.
 
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+	bool
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+	help
+	  Intel node to select io timing code that is common to the s3c2412
+	  and the s3c2443.
+
 config MACH_SMDK
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index c60317b3491..8759c070fd9 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
+obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index 7938fb0bc38..f02b3c06c1e 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -42,8 +42,44 @@ struct s3c2410_iobank_timing {
 	unsigned char	nwait_en;	/* nWait enabled for bank. */
 };
 
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+	unsigned int	idcy;
+	unsigned int	wstrd;
+	unsigned int	wstwr;
+	unsigned int	wstoen;
+	unsigned int	wstwen;
+	unsigned int	wstbrd;
+
+	/* register cache */
+	unsigned char	smbidcyr;
+	unsigned char	smbwstrd;
+	unsigned char	smbwstwr;
+	unsigned char	smbwstoen;
+	unsigned char	smbwstwen;
+	unsigned char	smbwstbrd;
+};
+
 union s3c_iobank {
-	  struct s3c2410_iobank_timing	*io_2410;
+	struct s3c2410_iobank_timing	*io_2410;
+	struct s3c2412_iobank_timing	*io_2412;
 };
 
 /**
@@ -174,6 +210,20 @@ extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
 
 extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
 
+/* S3C2412 compatible routines */
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
 #ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
 #define s3c_freq_dbg(x...) printk(KERN_INFO x)
 #else
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
new file mode 100644
index 00000000000..a3648cba0eb
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -0,0 +1,261 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412/S3C2443 (PL093 based) IO timing support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing infromation via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	unsigned int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		       "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+		       print_ns(bt->idcy),
+		       print_ns(bt->wstrd),
+		       print_ns(bt->wstwr),
+		       print_ns(bt->wstoen),
+		       print_ns(bt->wstwen),
+		       print_ns(bt->wstbrd));
+	}
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+	return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+				unsigned int *err)
+{
+	unsigned int ret = to_div(hwtm, clk_tns);
+
+	if (ret > 0xf)
+		*err = -EINVAL;
+
+	return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2412_iobank_timing *bt)
+{
+	unsigned int hclk = cfg->freq.hclk_tns;
+	int err = 0;
+
+	bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+	bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+	bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+	bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+	bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+	bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+	return err;
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		ret = s3c2412_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	void __iomem *regs;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		regs = S3C2412_SSMC_BANK(bank);
+
+		__raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+		__raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+		__raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+		__raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+		__raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+		__raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+	}
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+	return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+				     struct s3c2412_iobank_timing *bt,
+				     unsigned int bank)
+{
+	unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
+	void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+	bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+	bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+	bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+	bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+	bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+	if (bank < 2)
+		return true;
+
+	return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2412_iobank_timing *bt;
+	u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+	unsigned int bank;
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		if (!bank_is_io(bank, bankcfg))
+			continue;
+
+		bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
+		if (!bt) {
+			printk(KERN_ERR "%s: no memory for bank\n", __func__);
+			return -ENOMEM;
+		}
+
+		timings->bank[bank].io_2412 = bt;
+		s3c2412_iotiming_getbank(cfg, bt, bank);
+	}
+
+	s3c2412_print_timing("get", timings);
+	return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	u32 refresh;
+
+	WARN_ON(board == NULL);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh &= ((1 << 16) - 1);
+
+	s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
-- 
GitLab


From f0176794b6abc2e5239c07a58cf11b6f43d0f185 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:38 +0100
Subject: [PATCH 109/257] ARM: S3C2410: Add S3C2410A sysdev.

Add a sysdev S3C2410A sysdev to allow the differentiation
of the S3C2410A from the S3C2410. This is needed for the
CPUFREQ code to enable the extra features and update cpu
specific information.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/dma.c                  | 11 +++++++++++
 arch/arm/mach-s3c2410/irq.c                  | 15 ++++++++++++++-
 arch/arm/mach-s3c2410/pm.c                   | 12 ++++++++++++
 arch/arm/mach-s3c2410/s3c2410.c              | 20 ++++++++++++++++++++
 arch/arm/plat-s3c/include/plat/cpu.h         |  1 +
 arch/arm/plat-s3c24xx/cpu.c                  |  2 +-
 arch/arm/plat-s3c24xx/include/plat/s3c2410.h |  1 +
 7 files changed, 60 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index dbf96e60d99..63b753f56c6 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -164,6 +164,17 @@ static int __init s3c2410_dma_drvinit(void)
 }
 
 arch_initcall(s3c2410_dma_drvinit);
+
+static struct sysdev_driver s3c2410a_dma_driver = {
+	.add	= s3c2410_dma_add,
+};
+
+static int __init s3c2410a_dma_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_dma_driver);
+}
+
+arch_initcall(s3c2410a_dma_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2442)
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 92150399563..5e2f3533205 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -39,9 +39,22 @@ static struct sysdev_driver s3c2410_irq_driver = {
 	.resume		= s3c24xx_irq_resume,
 };
 
-static int s3c2410_irq_init(void)
+static int __init s3c2410_irq_init(void)
 {
 	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
 }
 
 arch_initcall(s3c2410_irq_init);
+
+static struct sysdev_driver s3c2410a_irq_driver = {
+	.add		= s3c2410_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
+};
+
+static int __init s3c2410a_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver);
+}
+
+arch_initcall(s3c2410a_irq_init);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 143e08a599d..966119c8efe 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -119,6 +119,18 @@ static int __init s3c2410_pm_drvinit(void)
 }
 
 arch_initcall(s3c2410_pm_drvinit);
+
+static struct sysdev_driver s3c2410a_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
+
+static int __init s3c2410a_pm_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver);
+}
+
+arch_initcall(s3c2410a_pm_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2440)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index feb141b1f91..e5724a22c35 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -116,6 +116,13 @@ struct sysdev_class s3c2410_sysclass = {
 	.name = "s3c2410-core",
 };
 
+/* Note, we would have liked to name this s3c2410-core, but we cannot
+ * register two sysdev_class with the same name.
+ */
+struct sysdev_class s3c2410a_sysclass = {
+	.name = "s3c2410a-core",
+};
+
 static struct sys_device s3c2410_sysdev = {
 	.cls		= &s3c2410_sysclass,
 };
@@ -133,9 +140,22 @@ static int __init s3c2410_core_init(void)
 
 core_initcall(s3c2410_core_init);
 
+static int __init s3c2410a_core_init(void)
+{
+	return sysdev_class_register(&s3c2410a_sysclass);
+}
+
+core_initcall(s3c2410a_core_init);
+
 int __init s3c2410_init(void)
 {
 	printk("S3C2410: Initialising architecture\n");
 
 	return sysdev_register(&s3c2410_sysdev);
 }
+
+int __init s3c2410a_init(void)
+{
+	s3c2410_sysdev.cls = &s3c2410a_sysclass;
+	return s3c2410_init();
+}
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index be541cbba07..fbc3d498e02 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -65,6 +65,7 @@ extern struct sys_timer s3c24xx_timer;
 /* system device classes */
 
 extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2410a_sysclass;
 extern struct sysdev_class s3c2412_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 1932b7e0da1..5447e60f393 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -81,7 +81,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.map_io		= s3c2410_map_io,
 		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
-		.init		= s3c2410_init,
+		.init		= s3c2410a_init,
 		.name		= name_s3c2410a
 	},
 	{
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index a9ac9e29759..b6deeef8f66 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -14,6 +14,7 @@
 #ifdef CONFIG_CPU_S3C2410
 
 extern  int s3c2410_init(void);
+extern  int s3c2410a_init(void);
 
 extern void s3c2410_map_io(void);
 
-- 
GitLab


From ca0b4901d8faaf98cf254e25cd2784bcb21e46d5 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:39 +0100
Subject: [PATCH 110/257] ARM: BAST: CPUFREQ: Add board support

Add board support for CPUFREQ with the Simtec BAST board
registering the necessary information with the core.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/mach-bast.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ce3baba2cd7..d8a26ea92f2 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -59,6 +59,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/cpu-freq.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -570,6 +571,12 @@ static struct clk *bast_clocks[] __initdata = {
 	&s3c24xx_uclk,
 };
 
+static struct s3c_cpufreq_board __initdata bast_cpufreq = {
+	.refresh	= 7800, /* 7.8usec */
+	.auto_io	= 1,
+	.need_io	= 1,
+};
+
 static void __init bast_map_io(void)
 {
 	/* initialise the clocks */
@@ -608,6 +615,8 @@ static void __init bast_init(void)
 
 	usb_simtec_init();
 	nor_simtec_init();
+
+	s3c_cpufreq_setboard(&bast_cpufreq);
 }
 
 MACHINE_START(BAST, "Simtec-BAST")
-- 
GitLab


From ad78759529be38d6aa062233b980095cf74aa7f0 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:40 +0100
Subject: [PATCH 111/257] ARM: S3C2410: Add armclk for cpufreq support

Add armclk for use with the cpufreq support and anything
else that may want it. This clock is just a direct
descendant of fclk.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/s3c2410.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index e5724a22c35..91ba42f688a 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -105,11 +105,20 @@ void __init_or_cpufreq s3c2410_setup_clocks(void)
 	s3c24xx_setup_clocks(fclk, hclk, pclk);
 }
 
+/* fake ARMCLK for use with cpufreq, etc. */
+
+static struct clk s3c2410_armclk = {
+	.name	= "armclk",
+	.parent	= &clk_f,
+	.id	= -1,
+};
+
 void __init s3c2410_init_clocks(int xtal)
 {
 	s3c24xx_register_baseclocks(xtal);
 	s3c2410_setup_clocks();
 	s3c2410_baseclk_add();
+	s3c24xx_register_clock(&s3c2410_armclk);
 }
 
 struct sysdev_class s3c2410_sysclass = {
-- 
GitLab


From dfff4e95d749c414af3f7350835139103408a50d Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:41 +0100
Subject: [PATCH 112/257] ARM: S3C: CPUFREQ: Add documentation for system

Add documentation for the S3C24XX style CPUFREQ driver.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 Documentation/arm/Samsung-S3C24XX/CPUfreq.txt | 75 +++++++++++++++++++
 1 file changed, 75 insertions(+)
 create mode 100644 Documentation/arm/Samsung-S3C24XX/CPUfreq.txt

diff --git a/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
new file mode 100644
index 00000000000..76b3a11e90b
--- /dev/null
+++ b/Documentation/arm/Samsung-S3C24XX/CPUfreq.txt
@@ -0,0 +1,75 @@
+		S3C24XX CPUfreq support
+		=======================
+
+Introduction
+------------
+
+ The S3C24XX series support a number of power saving systems, such as
+ the ability to change the core, memory and peripheral operating
+ frequencies. The core control is exported via the CPUFreq driver
+ which has a number of different manual or automatic controls over the
+ rate the core is running at.
+
+ There are two forms of the driver depending on the specific CPU and
+ how the clocks are arranged. The first implementation used as single
+ PLL to feed the ARM, memory and peripherals via a series of dividers
+ and muxes and this is the implementation that is documented here. A
+ newer version where there is a seperate PLL and clock divider for the
+ ARM core is available as a seperate driver.
+
+
+Layout
+------
+
+ The code core manages the CPU specific drivers, any data that they
+ need to register and the interface to the generic drivers/cpufreq
+ system. Each CPU registers a driver to control the PLL, clock dividers
+ and anything else associated with it. Any board that wants to use this
+ framework needs to supply at least basic details of what is required.
+
+ The core registers with drivers/cpufreq at init time if all the data
+ necessary has been supplied.
+
+
+CPU support
+-----------
+
+ The support for each CPU depends on the facilities provided by the
+ SoC and the driver as each device has different PLL and clock chains
+ associated with it.
+
+
+Slow Mode
+---------
+
+ The SLOW mode where the PLL is turned off altogether and the
+ system is fed by the external crystal input is currently not
+ supported.
+
+
+sysfs
+-----
+
+ The core code exports extra information via sysfs in the directory
+ devices/system/cpu/cpu0/arch-freq.
+
+
+Board Support
+-------------
+
+ Each board that wants to use the cpufreq code must register some basic
+ information with the core driver to provide information about what the
+ board requires and any restrictions being placed on it.
+
+ The board needs to supply information about whether it needs the IO bank
+ timings changing, any maximum frequency limits and information about the
+ SDRAM refresh rate.
+
+
+
+
+Document Author
+---------------
+
+Ben Dooks, Copyright 2009 Simtec Electronics
+Licensed under GPLv2
-- 
GitLab


From e6d197a6954c8a9ff85727c31ca61fc1da78628a Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:42 +0100
Subject: [PATCH 113/257] ARM: S3C: CPUFREQ: Add debugfs support for cpufreq

Add debugfs support for the cpufreq driver to allow
information about the system state to be exported to
the user.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig                              |   6 +
 arch/arm/mach-s3c2410/cpu-freq.c              |   2 +
 arch/arm/mach-s3c2412/cpu-freq.c              |   2 +
 arch/arm/plat-s3c24xx/Makefile                |   1 +
 arch/arm/plat-s3c24xx/cpu-freq-debugfs.c      | 199 ++++++++++++++++++
 arch/arm/plat-s3c24xx/cpu-freq.c              |  12 ++
 .../plat-s3c24xx/include/plat/cpu-freq-core.h |  24 +++
 arch/arm/plat-s3c24xx/s3c2410-iotiming.c      |  45 ++++
 arch/arm/plat-s3c24xx/s3c2412-iotiming.c      |  24 +++
 arch/arm/plat-s3c24xx/s3c2440-cpufreq.c       |   2 +
 10 files changed, 317 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/cpu-freq-debugfs.c

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c7a83efef0b..f07a4ba281b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1329,6 +1329,12 @@ config CPU_FREQ_S3C24XX_IODEBUG
 	help
 	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
 
+config CPU_FREQ_S3C24XX_DEBUGFS
+	bool "Export debugfs for CPUFreq"
+	depends on CPU_FREQ_S3C24XX && DEBUG_FS
+	help
+	  Export status information via debugfs.
+
 endif
 
 source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index f2cbdbab0df..9d1186877d0 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -111,6 +111,8 @@ static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
 	.set_refresh	= s3c2410_cpufreq_setrefresh,
 	.set_divs	= s3c2410_cpufreq_setdivs,
 	.calc_divs	= s3c2410_cpufreq_calcdivs,
+
+	.debug_io_show	= s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
 };
 
 static int s3c2410_cpufreq_add(struct sys_device *sysdev)
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
index 21a66178d9b..eb3ea172133 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -190,6 +190,8 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
 	.get_iotiming	= s3c2412_iotiming_get,
 
 	.resume_clocks	= s3c2412_setup_clocks,
+
+	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
 };
 
 static int s3c2412_cpufreq_add(struct sys_device *sysdev)
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 8759c070fd9..f3493751580 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -21,6 +21,7 @@ obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
 obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
 
 # Architecture dependant builds
 
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
new file mode 100644
index 00000000000..a9276667c2f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -0,0 +1,199 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - debugfs status support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+
+#include <plat/cpu-freq-core.h>
+
+static struct dentry *dbgfs_root;
+static struct dentry *dbgfs_file_io;
+static struct dentry *dbgfs_file_info;
+static struct dentry *dbgfs_file_board;
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+static void show_max(struct seq_file *seq, struct s3c_freq *f)
+{
+	seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
+		   f->fclk, f->hclk, f->pclk, f->armclk);
+}
+
+static int board_show(struct seq_file *seq, void *p)
+{
+	struct s3c_cpufreq_config *cfg;
+	struct s3c_cpufreq_board *brd;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	brd = cfg->board;
+	if (!brd) {
+		seq_printf(seq, "no board definition set?\n");
+		return 0;
+	}
+
+	seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
+	seq_printf(seq, "auto_io=%u\n", brd->auto_io);
+	seq_printf(seq, "need_io=%u\n", brd->need_io);
+
+	show_max(seq, &brd->max);
+
+
+	return 0;
+}
+
+static int fops_board_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, board_show, NULL);
+}
+
+static const struct file_operations fops_board = {
+	.open		= fops_board_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+static int info_show(struct seq_file *seq, void *p)
+{
+	struct s3c_cpufreq_config *cfg;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	seq_printf(seq, "  FCLK %ld Hz\n", cfg->freq.fclk);
+	seq_printf(seq, "  HCLK %ld Hz (%lu.%lu ns)\n",
+		   cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
+	seq_printf(seq, "  PCLK %ld Hz\n", cfg->freq.hclk);
+	seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
+	seq_printf(seq, "\n");
+
+	show_max(seq, &cfg->max);
+
+	seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
+		   cfg->divs.h_divisor, cfg->divs.p_divisor,
+		   cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
+	seq_printf(seq, "\n");
+
+	seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
+
+	return 0;
+}
+
+static int fops_info_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, info_show, NULL);
+}
+
+static const struct file_operations fops_info = {
+	.open		= fops_info_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+static int io_show(struct seq_file *seq, void *p)
+{
+	void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
+	struct s3c_cpufreq_config *cfg;
+	struct s3c_iotimings *iot;
+	union s3c_iobank *iob;
+	int bank;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	show_bank = cfg->info->debug_io_show;
+	if (!show_bank) {
+		seq_printf(seq, "no code to show bank timing\n");
+		return 0;
+	}
+
+	iot = s3c_cpufreq_getiotimings();
+	if (!iot) {
+		seq_printf(seq, "no io timings registered\n");
+		return 0;
+	}
+
+	seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		iob = &iot->bank[bank];
+
+		seq_printf(seq, "bank %d: ", bank);
+
+		if (!iob->io_2410) {
+			seq_printf(seq, "nothing set\n");
+			continue;
+		}
+
+		show_bank(seq, cfg, iob);
+	}
+
+	return 0;
+}
+
+static int fops_io_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, io_show, NULL);
+}
+
+static const struct file_operations fops_io = {
+	.open		= fops_io_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+
+static int __init s3c_freq_debugfs_init(void)
+{
+	dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
+	if (IS_ERR(dbgfs_root)) {
+		printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+		return PTR_ERR(dbgfs_root);
+	}
+
+	dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
+					    NULL, &fops_io);
+
+	dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
+					      NULL, &fops_info);
+
+	dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
+					       NULL, &fops_board);
+
+	return 0;
+}
+
+late_initcall(s3c_freq_debugfs_init);
+
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index 40ff7e2569d..4f1b789a117 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -50,6 +50,18 @@ static struct clk *clk_hclk;
 static struct clk *clk_pclk;
 static struct clk *clk_arm;
 
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
+{
+	return &cpu_cur;
+}
+
+struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
+{
+	return &s3c24xx_iotiming;
+}
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
+
 static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
 {
 	unsigned long fclk, pclk, hclk, armclk;
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index f02b3c06c1e..efeb025affc 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -13,6 +13,8 @@
 
 #include <plat/cpu-freq.h>
 
+struct seq_file;
+
 #define MAX_BANKS (8)
 #define S3C2412_MAX_IO	(8)
 
@@ -181,6 +183,10 @@ struct s3c_cpufreq_info {
 					  struct cpufreq_frequency_table *t,
 					  size_t table_size);
 
+	void		(*debug_io_show)(struct seq_file *seq,
+					 struct s3c_cpufreq_config *cfg,
+					 union s3c_iobank *iob);
+
 	void		(*set_refresh)(struct s3c_cpufreq_config *cfg);
 	void		(*set_fvco)(struct s3c_cpufreq_config *cfg);
 	void		(*set_divs)(struct s3c_cpufreq_config *cfg);
@@ -191,6 +197,24 @@ extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
 
 extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
 
+/* exports and utilities for debugfs */
+extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
+extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
+
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#define s3c_cpufreq_debugfs_call(x) x
+#else
+#define s3c_cpufreq_debugfs_call(x) NULL
+#endif
+
 /* Useful utility functions. */
 
 extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
index 26fe2129cf2..d0a3a145cd4 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/cpufreq.h>
+#include <linux/seq_file.h>
 #include <linux/io.h>
 
 #include <mach/map.h>
@@ -303,6 +304,50 @@ void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
 	bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
 }
 
+/**
+ * s3c2410_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+ */
+void s3c2410_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2410_iobank_timing *bt = iob->io_2410;
+	unsigned long bankcon = bt->bankcon;
+	unsigned long hclk = cfg->freq.hclk_tns;
+	unsigned int tacs;
+	unsigned int tcos;
+	unsigned int tacc;
+	unsigned int tcoh;
+	unsigned int tcah;
+
+	seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
+
+	tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+	tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+	tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+	tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+	tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+
+	seq_printf(seq,
+		   "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+		   print_ns(bt->tacs),
+		   print_ns(bt->tcos),
+		   print_ns(bt->tacc),
+		   print_ns(bt->tcoh),
+		   print_ns(bt->tcah));
+
+	seq_printf(seq,
+		   "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+		   print_ns(tacs),
+		   print_ns(tcos),
+		   print_ns(tacc),
+		   print_ns(tcoh),
+		   print_ns(tcah));
+}
+
 /**
  * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
  * @cfg: The frequency configuration
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
index a3648cba0eb..fd45e47facb 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
+#include <linux/seq_file.h>
 #include <linux/sysdev.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
@@ -108,6 +109,29 @@ static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
 	return err;
 }
 
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+	seq_printf(seq,
+		   "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		   "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+		   print_ns(bt->idcy),
+		   print_ns(bt->wstrd),
+		   print_ns(bt->wstwr),
+		   print_ns(bt->wstoen),
+		   print_ns(bt->wstwen),
+		   print_ns(bt->wstbrd));
+}
+
 /**
  * s3c2412_iotiming_calc - calculate all the bank divisor settings.
  * @cfg: The current frequency configuration.
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
index c177a20319e..ae2e6c604f2 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -266,6 +266,8 @@ struct s3c_cpufreq_info s3c2440_cpufreq_info = {
 	.calc_freqtable	= s3c2440_cpufreq_calctable,
 
 	.resume_clocks	= s3c244x_setup_clocks,
+
+	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
 };
 
 static int s3c2440_cpufreq_add(struct sys_device *sysdev)
-- 
GitLab


From 2896bda4824c1e4d34852e355916e34671e38a11 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 1 Jul 2009 17:47:09 +0200
Subject: [PATCH 114/257] ARM: S3C6410: airgoo hmt board support

Add support for the Airgoo HMT (home media terminal) device.
The HMT is a tablet device with a s3c6410, a 7" LCD and a number
of peripheral connections.

For more details of the hardware specs, see:
http://article.gmane.org/gmane.linux.debian.devel.embedded/4307

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[ben-linux@fluff.org: subject rewrite]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/Kconfig    |  10 ++
 arch/arm/mach-s3c6410/Makefile   |   3 +-
 arch/arm/mach-s3c6410/mach-hmt.c | 276 +++++++++++++++++++++++++++++++
 3 files changed, 287 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-s3c6410/mach-hmt.c

diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index e63aac7f4e5..f9d0f09f976 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -97,3 +97,13 @@ config MACH_NCP
 	select S3C64XX_SETUP_I2C1
 	help
           Machine support for the Samsung NCP
+
+config MACH_HMT
+	bool "Airgoo HMT"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C_DEV_USB_HOST
+	select S3C64XX_SETUP_FB_24BPP
+	select HAVE_PWM
+	help
+	  Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 6f9deac8861..3e48c3dbf97 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -23,5 +23,4 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
 obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
-
-
+obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
new file mode 100644
index 00000000000..c5741056193
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -0,0 +1,276 @@
+/* mach-hmt.c - Platform code for Airgoo HMT
+ *
+ * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/pwm_backlight.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static int hmt_bl_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
+	if (!ret)
+		ret = gpio_direction_output(S3C64XX_GPB(4), 0);
+
+	return ret;
+}
+
+static int hmt_bl_notify(int brightness)
+{
+	/*
+	 * translate from CIELUV/CIELAB L*->brightness, E.G. from
+	 * perceived luminance to light output. Assumes range 0..25600
+	 */
+	if (brightness < 0x800) {
+		/* Y = Yn * L / 903.3 */
+		brightness = (100*256 * brightness + 231245/2) / 231245;
+	} else {
+		/* Y = Yn * ((L + 16) / 116 )^3 */
+		int t = (brightness*4 + 16*1024 + 58)/116;
+		brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
+	}
+
+	gpio_set_value(S3C64XX_GPB(4), brightness);
+
+	return brightness;
+}
+
+static void hmt_bl_exit(struct device *dev)
+{
+	gpio_free(S3C64XX_GPB(4));
+}
+
+static struct platform_pwm_backlight_data hmt_backlight_data = {
+	.pwm_id		= 1,
+	.max_brightness	= 100 * 256,
+	.dft_brightness	= 40 * 256,
+	.pwm_period_ns	= 1000000000 / (100 * 256 * 20),
+	.init		= hmt_bl_init,
+	.notify		= hmt_bl_notify,
+	.exit		= hmt_bl_exit,
+
+};
+
+static struct platform_device hmt_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &s3c_device_timer[1].dev,
+		.platform_data = &hmt_backlight_data,
+	},
+};
+
+static struct s3c_fb_pd_win hmt_fb_win0 = {
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &hmt_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition hmt_nand_part[] = {
+	[0] = {
+		.name	= "uboot",
+		.size	= SZ_512K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "uboot-env1",
+		.size	= SZ_256K,
+		.offset	= SZ_512K,
+	},
+	[2] = {
+		.name	= "uboot-env2",
+		.size	= SZ_256K,
+		.offset	= SZ_512K + SZ_256K,
+	},
+	[3] = {
+		.name	= "kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_1M,
+	},
+	[4] = {
+		.name	= "rootfs",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= SZ_1M + SZ_2M,
+	},
+};
+
+static struct s3c2410_nand_set hmt_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(hmt_nand_part),
+		.partitions	= hmt_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand hmt_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
+	.sets		= hmt_nand_sets,
+};
+
+static struct gpio_led hmt_leds[] = {
+	{ /* left function keys */
+		.name			= "left:blue",
+		.gpio			= S3C64XX_GPO(12),
+		.default_trigger	= "default-on",
+	},
+	{ /* right function keys - red */
+		.name			= "right:red",
+		.gpio			= S3C64XX_GPO(13),
+	},
+	{ /* right function keys - green */
+		.name			= "right:green",
+		.gpio			= S3C64XX_GPO(14),
+	},
+	{ /* right function keys - blue */
+		.name			= "right:blue",
+		.gpio			= S3C64XX_GPO(15),
+		.default_trigger	= "default-on",
+	},
+};
+
+static struct gpio_led_platform_data hmt_led_data = {
+	.num_leds = ARRAY_SIZE(hmt_leds),
+	.leds = hmt_leds,
+};
+
+static struct platform_device hmt_leds_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &hmt_led_data,
+};
+
+static struct map_desc hmt_iodesc[] = {};
+
+static struct platform_device *hmt_devices[] __initdata = {
+	&s3c_device_i2c0,
+	&s3c_device_nand,
+	&s3c_device_fb,
+	&s3c_device_usb,
+	&s3c_device_timer[1],
+	&hmt_backlight_device,
+	&hmt_leds_device,
+};
+
+static void __init hmt_map_io(void)
+{
+	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+}
+
+static void __init hmt_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_fb_set_platdata(&hmt_lcd_pdata);
+	s3c_device_nand.dev.platform_data = &hmt_nand_info;
+
+	gpio_request(S3C64XX_GPC(7), "usb power");
+	gpio_direction_output(S3C64XX_GPC(7), 0);
+	gpio_request(S3C64XX_GPM(0), "usb power");
+	gpio_direction_output(S3C64XX_GPM(0), 1);
+	gpio_request(S3C64XX_GPK(7), "usb power");
+	gpio_direction_output(S3C64XX_GPK(7), 1);
+	gpio_request(S3C64XX_GPF(13), "usb power");
+	gpio_direction_output(S3C64XX_GPF(13), 1);
+
+	platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
+}
+
+MACHINE_START(HMT, "Airgoo-HMT")
+	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= hmt_map_io,
+	.init_machine	= hmt_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
-- 
GitLab


From 14077ea63b5aea1db0142c1085d24aa0d11b9d36 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 1 Jul 2009 17:47:06 +0200
Subject: [PATCH 115/257] ARM: S3C: move s3c_device_nand from plat-s3c24xx to
 plat-s3c

Move the s3c_device_nand platform device from plat-s3c24xx to plat-s3c,
now that the nand driver also support the s3c64xx devices.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/map.h |  1 +
 arch/arm/mach-s3c24a0/include/mach/map.h |  1 +
 arch/arm/mach-s3c6400/include/mach/map.h |  2 ++
 arch/arm/mach-s3c6400/s3c6400.c          |  2 ++
 arch/arm/mach-s3c6410/cpu.c              |  2 ++
 arch/arm/plat-s3c/Makefile               |  1 +
 arch/arm/plat-s3c/dev-nand.c             | 30 ++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/devs.c             | 19 ---------------
 8 files changed, 39 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm/plat-s3c/dev-nand.c

diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index e99b212cb1c..e9821850065 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -103,5 +103,6 @@
 #define S3C_PA_UART	    S3C24XX_PA_UART
 #define S3C_PA_USBHOST	S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
+#define S3C_PA_NAND	    S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index a01132717e3..79e4d93ea2b 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -81,5 +81,6 @@
 
 #define S3C_PA_UART		S3C24A0_PA_UART
 #define S3C_PA_IIC		S3C24A0_PA_IIC
+#define S3C_PA_NAND		S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d3..fba241a7198 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -38,6 +38,7 @@
 #define S3C_VA_UART2		S3C_VA_UARTx(2)
 #define S3C_VA_UART3		S3C_VA_UARTx(3)
 
+#define S3C64XX_PA_NAND		(0x70200000)
 #define S3C64XX_PA_FB		(0x77100000)
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_WATCHDOG	(0x7E004000)
@@ -72,6 +73,7 @@
 #define S3C_PA_HSMMC2		S3C64XX_PA_HSMMC2
 #define S3C_PA_IIC		S3C64XX_PA_IIC0
 #define S3C_PA_IIC1		S3C64XX_PA_IIC1
+#define S3C_PA_NAND		S3C64XX_PA_NAND
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index 1ece887d90b..b42bdd0f213 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -48,6 +48,8 @@ void __init s3c6400_map_io(void)
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
+
+	s3c_device_nand.name = "s3c6400-nand";
 }
 
 void __init s3c6400_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index ade904de889..9b67c663d9d 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -62,6 +62,8 @@ void __init s3c6410_map_io(void)
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
+
+	s3c_device_nand.name = "s3c6400-nand";
 }
 
 void __init s3c6410_init_clocks(int xtal)
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 0761766b183..d0b4a0fda5c 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_SND_S3C64XX_SOC_I2S)	+= dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
+obj-y				+= dev-nand.o
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
new file mode 100644
index 00000000000..4e532373243
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -0,0 +1,30 @@
+/*
+ * S3C series device definition for nand device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+
+static struct resource s3c_nand_resource[] = {
+	[0] = {
+		.start = S3C_PA_NAND,
+		.end   = S3C_PA_NAND + SZ_1M,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+struct platform_device s3c_device_nand = {
+	.name		  = "s3c2410-nand",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_nand_resource),
+	.resource	  = s3c_nand_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_nand);
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..20c114d6f61 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -180,25 +180,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
 	}
 }
 
-/* NAND Controller */
-
-static struct resource s3c_nand_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_NAND,
-		.end   = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-struct platform_device s3c_device_nand = {
-	.name		  = "s3c2410-nand",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_nand_resource),
-	.resource	  = s3c_nand_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_nand);
-
 /* USB Device (Gadget)*/
 
 static struct resource s3c_usbgadget_resource[] = {
-- 
GitLab


From b5ead1cda64336b589eb4353e00f69c818fb6603 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 1 Jul 2009 17:47:07 +0200
Subject: [PATCH 116/257] ARM: S3C: move timer/pwm handling from plat-s3c24xx
 to plat-s3c

The s3c64xx devices use the same hardware core as s3c24xx, so move
the timer/pwm handling to plat-s3c so it can be used by both.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Makefile                | 4 ++++
 arch/arm/{plat-s3c24xx => plat-s3c}/pwm.c | 5 +++--
 arch/arm/plat-s3c24xx/Makefile            | 1 -
 3 files changed, 7 insertions(+), 3 deletions(-)
 rename arch/arm/{plat-s3c24xx => plat-s3c}/pwm.c (99%)

diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index d0b4a0fda5c..3e27720ae35 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -28,6 +28,10 @@ obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= pm-gpio.o
 obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
 
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM)		+= pwm.o
+
 # devices
 
 obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c/pwm.c
similarity index 99%
rename from arch/arm/plat-s3c24xx/pwm.c
rename to arch/arm/plat-s3c/pwm.c
index 0120b760315..f3d37ac5595 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c/pwm.c
@@ -1,10 +1,10 @@
-/* arch/arm/plat-s3c24xx/pwm.c
+/* arch/arm/plat-s3c/pwm.c
  *
  * Copyright (c) 2007 Ben Dooks
  * Copyright (c) 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
  *
- * S3C24XX PWM device core
+ * S3C series PWM device core
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,6 +20,7 @@
 #include <linux/pwm.h>
 
 #include <mach/irqs.h>
+#include <mach/map.h>
 
 #include <plat/devs.h>
 #include <plat/regs-timer.h>
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c282..0807831c992 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
-- 
GitLab


From 897bd6a363770ced6b78f6ae8882325c7590ed8b Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 31 Jul 2009 02:29:45 +0100
Subject: [PATCH 117/257] ARM: 5633/1: Add wdt resource for w90p910 platform

Add wdt resource for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 3e3a267b2dd..117578aed68 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -340,6 +340,28 @@ static struct spi_board_info w90p910_spi_board_info[] __initdata = {
 	},
 };
 
+/* WDT Device */
+
+static struct resource w90p910_wdt_resource[] = {
+	[0] = {
+		.start = W90X900_PA_TIMER,
+		.end   = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_WDT,
+		.end   = IRQ_WDT,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device w90p910_device_wdt = {
+	.name		= "w90p910-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90p910_wdt_resource),
+	.resource	= w90p910_wdt_resource,
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -357,6 +379,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90p910_device_fmi,
 	&w90p910_device_emc,
 	&w90p910_device_spi,
+	&w90p910_device_wdt,
 };
 
 static void __init w90p910evb_map_io(void)
-- 
GitLab


From ae45b1c618d9e645a5e1decff31b710f739745fa Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 31 Jul 2009 02:30:32 +0100
Subject: [PATCH 118/257] ARM: 5634/1: Add static setting cpu frequence for
 w90p910 platform

Add static setting cpu frequence for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Makefile                |  2 +-
 arch/arm/mach-w90x900/clksel.c                | 91 +++++++++++++++++++
 arch/arm/mach-w90x900/cpu.h                   |  1 +
 .../mach-w90x900/include/mach/regs-clock.h    | 22 +++++
 arch/arm/mach-w90x900/include/mach/regs-ebi.h | 33 +++++++
 arch/arm/mach-w90x900/w90p910.c               | 80 ++++++++++++++++
 6 files changed, 228 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-w90x900/clksel.c
 create mode 100644 arch/arm/mach-w90x900/include/mach/regs-ebi.h

diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index d50c94f4dbd..3ccd625455c 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -5,7 +5,7 @@
 # Object file lists.
 
 obj-y				:= irq.o time.o mfp-w90p910.o gpio.o clock.o
-
+obj-y				+= clksel.o
 # W90X900 CPU support files
 
 obj-$(CONFIG_CPU_W90P910)	+= w90p910.o
diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c
new file mode 100644
index 00000000000..5a77eb91cb1
--- /dev/null
+++ b/arch/arm/mach-w90x900/clksel.c
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/arm/mach-w90x900/clksel.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+
+#define PLL0		0x00
+#define PLL1		0x01
+#define OTHER		0x02
+#define EXT		0x03
+#define MSOFFSET	0x0C
+#define ATAOFFSET	0x0a
+#define LCDOFFSET	0x06
+#define AUDOFFSET	0x04
+#define CPUOFFSET	0x00
+
+static DEFINE_MUTEX(clksel_sem);
+
+static void clock_source_select(const char *dev_id, unsigned int clkval)
+{
+	unsigned int clksel, offset;
+
+	clksel = __raw_readl(REG_CLKSEL);
+
+	if (strcmp(dev_id, "w90p910-ms") == 0)
+		offset = MSOFFSET;
+	else if (strcmp(dev_id, "w90p910-atapi") == 0)
+		offset = ATAOFFSET;
+	else if (strcmp(dev_id, "w90p910-lcd") == 0)
+		offset = LCDOFFSET;
+	else if (strcmp(dev_id, "w90p910-audio") == 0)
+		offset = AUDOFFSET;
+	else
+		offset = CPUOFFSET;
+
+	clksel &= ~(0x03 << offset);
+	clksel |= (clkval << offset);
+
+	__raw_writel(clksel, REG_CLKSEL);
+}
+
+void w90p910_clock_source(struct device *dev, unsigned char *src)
+{
+	unsigned int clkval;
+	const char *dev_id;
+
+	BUG_ON(!src);
+	clkval = 0;
+
+	mutex_lock(&clksel_sem);
+
+	if (dev)
+		dev_id = dev_name(dev);
+	else
+		dev_id = "cpufreq";
+
+	if (strcmp(src, "pll0") == 0)
+		clkval = PLL0;
+	else if (strcmp(src, "pll1") == 0)
+		clkval = PLL1;
+	else if (strcmp(src, "ext") == 0)
+		clkval = EXT;
+	else if (strcmp(src, "oth") == 0)
+		clkval = OTHER;
+
+	clock_source_select(dev_id, clkval);
+
+	mutex_unlock(&clksel_sem);
+}
+EXPORT_SYMBOL(w90p910_clock_source);
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 57b5dbabeb4..ddde959d898 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -45,6 +45,7 @@ extern void w90p910_init_clocks(void);
 extern void w90p910_map_io(struct map_desc *mach_desc, int size);
 extern struct platform_device w90p910_serial_device;
 extern struct sys_timer w90x900_timer;
+extern void w90p910_clock_source(struct device *dev, unsigned char *src);
 
 #define W90X900_8250PORT(name)					\
 {								\
diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h
index f10b6a8dc06..516d6b477b6 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-clock.h
+++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h
@@ -28,4 +28,26 @@
 #define REG_CLKEN1	(CLK_BA + 0x24)
 #define REG_CLKDIV1	(CLK_BA + 0x28)
 
+/* Define PLL freq setting */
+#define PLL_DISABLE		0x12B63
+#define	PLL_66MHZ		0x2B63
+#define	PLL_100MHZ		0x4F64
+#define PLL_120MHZ		0x4F63
+#define	PLL_166MHZ		0x4124
+#define	PLL_200MHZ		0x4F24
+
+/* Define AHB:CPUFREQ ratio */
+#define	AHB_CPUCLK_1_1		0x00
+#define	AHB_CPUCLK_1_2		0x01
+#define	AHB_CPUCLK_1_4		0x02
+#define	AHB_CPUCLK_1_8		0x03
+
+/* Define APB:AHB ratio */
+#define APB_AHB_1_2		0x01
+#define APB_AHB_1_4		0x02
+#define APB_AHB_1_8		0x03
+
+/* Define clock skew */
+#define DEFAULTSKEW		0x48
+
 #endif /*  __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-ebi.h b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
new file mode 100644
index 00000000000..b68455e7f88
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-ebi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_EBI_H
+#define __ASM_ARCH_REGS_EBI_H
+
+/* EBI Control Registers */
+
+#define EBI_BA		W90X900_VA_EBI
+#define REG_EBICON	(EBI_BA + 0x00)
+#define REG_ROMCON	(EBI_BA + 0x04)
+#define REG_SDCONF0	(EBI_BA + 0x08)
+#define REG_SDCONF1	(EBI_BA + 0x0C)
+#define REG_SDTIME0	(EBI_BA + 0x10)
+#define REG_SDTIME1	(EBI_BA + 0x14)
+#define REG_EXT0CON	(EBI_BA + 0x18)
+#define REG_EXT1CON	(EBI_BA + 0x1C)
+#define REG_EXT2CON	(EBI_BA + 0x20)
+#define REG_EXT3CON	(EBI_BA + 0x24)
+#define REG_EXT4CON	(EBI_BA + 0x28)
+#define REG_CKSKEW	(EBI_BA + 0x2C)
+
+#endif /*  __ASM_ARCH_REGS_EBI_H */
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 6ebf5cfc78d..8444eababaa 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/serial_8250.h>
+#include <linux/delay.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,6 +33,8 @@
 
 #include <mach/hardware.h>
 #include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
 
 #include "cpu.h"
 #include "clock.h"
@@ -123,6 +126,83 @@ void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
 		printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
 }
 
+/*Set W90P910 cpu frequence*/
+static int __init w90p910_set_clkval(unsigned int cpufreq)
+{
+	unsigned int pllclk, ahbclk, apbclk, val;
+
+	pllclk = 0;
+	ahbclk = 0;
+	apbclk = 0;
+
+	switch (cpufreq) {
+	case 66:
+		pllclk = PLL_66MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 100:
+		pllclk = PLL_100MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 120:
+		pllclk = PLL_120MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 166:
+		pllclk = PLL_166MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 200:
+		pllclk = PLL_200MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+	}
+
+	__raw_writel(pllclk, REG_PLLCON0);
+
+	val = __raw_readl(REG_CLKDIV);
+	val &= ~(0x03 << 24 | 0x03 << 26);
+	val |= (ahbclk << 24 | apbclk << 26);
+	__raw_writel(val, REG_CLKDIV);
+
+	return 	0;
+}
+static int __init w90p910_set_cpufreq(char *str)
+{
+	unsigned long cpufreq, val;
+
+	if (!*str)
+		return 0;
+
+	strict_strtoul(str, 0, &cpufreq);
+
+	w90p910_clock_source(NULL, "ext");
+
+	w90p910_set_clkval(cpufreq);
+
+	mdelay(1);
+
+	val = __raw_readl(REG_CKSKEW);
+	val &= ~0xff;
+	val |= DEFAULTSKEW;
+	__raw_writel(val, REG_CKSKEW);
+
+	w90p910_clock_source(NULL, "pll0");
+
+	return 1;
+}
+
+__setup("cpufreq=", w90p910_set_cpufreq);
+
 /*Init W90P910 clock*/
 
 void __init w90p910_init_clocks(void)
-- 
GitLab


From fb85205ada3fef98122a40b700ecb71efb33ae71 Mon Sep 17 00:00:00 2001
From: Sergey Matyukevich <geomatsi@gmail.com>
Date: Thu, 30 Jul 2009 22:23:24 +0100
Subject: [PATCH 119/257] ARM: 5631/1: Platform data for CF/IDE support in
 AT91SAM9260

This patch adds platform data for CF/IDE support
and SMC init code for AT91SAM9260 SoC.

Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9260_devices.c | 116 +++++++++++++++++++++++
 1 file changed, 116 insertions(+)

diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index d74c9ac007e..ee4ea0e720c 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1113,6 +1113,122 @@ void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  CF/IDE
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
+	defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+	defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_4,
+		.end	= AT91_CHIPSELECT_4 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device cf0_device = {
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &cf0_data,
+	},
+	.resource	= cf0_resources,
+	.num_resources	= ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_5,
+		.end	= AT91_CHIPSELECT_5 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device cf1_device = {
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &cf1_data,
+	},
+	.resource	= cf1_resources,
+	.num_resources	= ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+	struct platform_device *pdev;
+	unsigned long csa;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+
+	switch (data->chipselect) {
+	case 4:
+		at91_set_multi_drive(AT91_PIN_PC8, 0);
+		at91_set_A_periph(AT91_PIN_PC8, 0);
+		csa |= AT91_MATRIX_CS4A_SMC_CF1;
+		cf0_data = *data;
+		pdev = &cf0_device;
+		break;
+	case 5:
+		at91_set_multi_drive(AT91_PIN_PC9, 0);
+		at91_set_A_periph(AT91_PIN_PC9, 0);
+		csa |= AT91_MATRIX_CS5A_SMC_CF2;
+		cf1_data = *data;
+		pdev = &cf1_device;
+		break;
+	default:
+		printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+		       data->chipselect);
+		return;
+	}
+
+	at91_sys_write(AT91_MATRIX_EBICSA, csa);
+
+	if (data->rst_pin) {
+		at91_set_multi_drive(data->rst_pin, 0);
+		at91_set_gpio_output(data->rst_pin, 1);
+	}
+
+	if (data->irq_pin) {
+		at91_set_gpio_input(data->irq_pin, 0);
+		at91_set_deglitch(data->irq_pin, 1);
+	}
+
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 0);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+
+	at91_set_B_periph(AT91_PIN_PC6, 0);     /* CFCE1 */
+	at91_set_B_periph(AT91_PIN_PC7, 0);     /* CFCE2 */
+	at91_set_A_periph(AT91_PIN_PC10, 0);    /* CFRNW */
+	at91_set_A_periph(AT91_PIN_PC15, 1);    /* NWAIT */
+
+	if (data->flags & AT91_CF_TRUE_IDE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
+		pdev->name = "pata_at91";
+#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+		pdev->name = "at91_ide";
+#else
+#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#endif
+	else
+		pdev->name = "at91_cf";
+
+	platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_cf(struct at91_cf_data * data) {}
+#endif
 
 /* -------------------------------------------------------------------- */
 /*
-- 
GitLab


From 0c30df6fe0bd1e3845357e793dc1bfd908751c45 Mon Sep 17 00:00:00 2001
From: Sergey Matyukevich <geomatsi@gmail.com>
Date: Thu, 30 Jul 2009 22:29:07 +0100
Subject: [PATCH 120/257] ARM: 5632/1: Board-specific data for IDE support on
 afeb9260

This patch adds board-specific data for IDE support on afeb9260.

Depends on #5631/1

Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Acked-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-afeb-9260v1.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 970fd6b6753..61e52b66bc7 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -174,6 +174,16 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
 	},
 };
 
+/*
+ * IDE (CF True IDE mode)
+ */
+static struct at91_cf_data afeb9260_cf_data = {
+	.chipselect = 4,
+	.irq_pin    = AT91_PIN_PA6,
+	.rst_pin    = AT91_PIN_PA7,
+	.flags      = AT91_CF_TRUE_IDE,
+};
+
 static void __init afeb9260_board_init(void)
 {
 	/* Serial */
@@ -202,6 +212,8 @@ static void __init afeb9260_board_init(void)
 			ARRAY_SIZE(afeb9260_i2c_devices));
 	/* Audio */
 	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
+	/* IDE */
+	at91_add_device_cf(&afeb9260_cf_data);
 }
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
-- 
GitLab


From a084fcfae541abc0eeecdd73ceeb01fb2453df4e Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 1 Aug 2009 16:26:03 +0100
Subject: [PATCH 121/257] [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 38 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 30af4329469..200d83a9828 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Jul 9 20:56:13 2009
+# Last update: Sat Aug 1 16:26:02 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2313,3 +2313,39 @@ openrd_base		MACH_OPENRD_BASE	OPENRD_BASE		2325
 incredible		MACH_INCREDIBLE		INCREDIBLE		2326
 incrediblec		MACH_INCREDIBLEC	INCREDIBLEC		2327
 heroct			MACH_HEROCT		HEROCT			2328
+mmnet1000		MACH_MMNET1000		MMNET1000		2329
+devkit8000		MACH_DEVKIT8000		DEVKIT8000		2330
+devkit9000		MACH_DEVKIT9000		DEVKIT9000		2331
+mx31txtr		MACH_MX31TXTR		MX31TXTR		2332
+u380			MACH_U380		U380			2333
+oamp3_hualu		MACH_HUALU_BOARD	HUALU_BOARD		2334
+npcmx50			MACH_NPCMX50		NPCMX50			2335
+mx51_lange51		MACH_MX51_LANGE51	MX51_LANGE51		2336
+mx51_lange52		MACH_MX51_LANGE52	MX51_LANGE52		2337
+riom			MACH_RIOM		RIOM			2338
+comcas			MACH_COMCAS		COMCAS			2339
+wsi_mx27		MACH_WSI_MX27		WSI_MX27		2340
+cm_t35			MACH_CM_T35		CM_T35			2341
+net2big			MACH_NET2BIG		NET2BIG			2342
+motorola_a1600		MACH_MOTOROLA_A1600	MOTOROLA_A1600		2343
+igep0020		MACH_IGEP0020		IGEP0020		2344
+igep0010		MACH_IGEP0010		IGEP0010		2345
+mv6281gtwge2		MACH_MV6281GTWGE2	MV6281GTWGE2		2346
+scat100			MACH_SCAT100		SCAT100			2347
+sanmina			MACH_SANMINA		SANMINA			2348
+momento			MACH_MOMENTO		MOMENTO			2349
+nuc9xx			MACH_NUC9XX		NUC9XX			2350
+nuc910evb		MACH_NUC910EVB		NUC910EVB		2351
+nuc920evb		MACH_NUC920EVB		NUC920EVB		2352
+nuc950evb		MACH_NUC950EVB		NUC950EVB		2353
+nuc945evb		MACH_NUC945EVB		NUC945EVB		2354
+nuc960evb		MACH_NUC960EVB		NUC960EVB		2355
+nuc932evb		MACH_NUC932EVB		NUC932EVB		2356
+nuc900			MACH_NUC900		NUC900			2357
+sd1soc			MACH_SD1SOC		SD1SOC			2358
+ln2440bc		MACH_LN2440BC		LN2440BC		2359
+rsbc			MACH_RSBC		RSBC			2360
+openrd_client		MACH_OPENRD_CLIENT	OPENRD_CLIENT		2361
+hpipaq11x		MACH_HPIPAQ11X		HPIPAQ11X		2362
+wayland			MACH_WAYLAND		WAYLAND			2363
+acnbsx102		MACH_ACNBSX102		ACNBSX102		2364
-- 
GitLab


From af1057abd7d5f97e17ab96e34d1920746188ddcb Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Mon, 3 Aug 2009 11:57:20 +0100
Subject: [PATCH 122/257] ARM: 5635/1: Use DIV_ROUND_CLOSEST

The kernel.h macro DIV_ROUND_CLOSEST performs the computation
(x + d/2)/d but is perhaps more readable.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

@depends on haskernel@
expression x,__divisor;
@@

- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 40755298fa3..16b92c37ec9 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -82,7 +82,7 @@ void __init ep93xx_map_io(void)
  */
 static unsigned int last_jiffy_time;
 
-#define TIMER4_TICKS_PER_JIFFY		((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+#define TIMER4_TICKS_PER_JIFFY		DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
 
 static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 {
-- 
GitLab


From 8db5d1a64d36d0750b88c6c13feeaf0e00be2eb4 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 12:21:38 +0200
Subject: [PATCH 123/257] MXC: pass base/irq to mxc_timer_init

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/clock.c               |  2 +-
 arch/arm/mach-mx2/clock_imx21.c         |  2 +-
 arch/arm/mach-mx2/clock_imx27.c         |  2 +-
 arch/arm/mach-mx3/clock-imx35.c         |  2 +-
 arch/arm/mach-mx3/clock.c               |  3 ++-
 arch/arm/plat-mxc/include/mach/common.h |  2 +-
 arch/arm/plat-mxc/time.c                | 21 ++-------------------
 7 files changed, 9 insertions(+), 25 deletions(-)

diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 0d0f306851d..7b739dd8700 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -626,7 +626,7 @@ int __init mx1_clocks_init(unsigned long fref)
 	clk_enable(&hclk);
 	clk_enable(&fclk);
 
-	mxc_timer_init(&gpt_clk);
+	mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 0850fb88ec1..eede79855f4 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -1004,6 +1004,6 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_enable(&uart_clk[0]);
 #endif
 
-	mxc_timer_init(&gpt_clk[0]);
+	mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 2c971442f3f..a0c577f80d4 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -748,7 +748,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&uart1_clk);
 #endif
 
-	mxc_timer_init(&gpt1_clk);
+	mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 577ee83d1f6..4cf1849f552 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -456,7 +456,7 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
 	__raw_writel(0, CCM_BASE + CCM_CGR3);
 
-	mxc_timer_init(&gpt_clk);
+	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 8b14239724c..25b6f55bfb0 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -29,6 +29,7 @@
 
 #include <mach/clock.h>
 #include <mach/hardware.h>
+#include <mach/mx31.h>
 #include <mach/common.h>
 
 #include "crm_regs.h"
@@ -609,7 +610,7 @@ int __init mx31_clocks_init(unsigned long fref)
 		__raw_writel(reg, MXC_CCM_PMCR1);
 	}
 
-	mxc_timer_init(&ipg_clk);
+	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 02c3cd004db..1c48aefe4b6 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,7 +20,7 @@ extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
 extern void mxc_init_irq(void);
-extern void mxc_timer_init(struct clk *timer_clk);
+extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 88fb3a57e02..7e71bb6270e 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -281,30 +281,13 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 	return 0;
 }
 
-void __init mxc_timer_init(struct clk *timer_clk)
+void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
 	uint32_t tctl_val;
-	int irq;
 
 	clk_enable(timer_clk);
 
-	if (cpu_is_mx1()) {
-#ifdef CONFIG_ARCH_MX1
-		timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
-		irq = TIM1_INT;
-#endif
-	} else if (cpu_is_mx2()) {
-#ifdef CONFIG_ARCH_MX2
-		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
-		irq = MXC_INT_GPT1;
-#endif
-	} else if (cpu_is_mx3()) {
-#ifdef CONFIG_ARCH_MX3
-		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
-		irq = MXC_INT_GPT;
-#endif
-	} else
-		BUG();
+	timer_base = base;
 
 	/*
 	 * Initialise to a known state (all timers off, and timing reset)
-- 
GitLab


From be124c94279edf4306798100f120c386947d8724 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 12:19:02 +0200
Subject: [PATCH 124/257] system.c: runtime base address

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/generic.c             |  1 +
 arch/arm/mach-mx2/generic.c             |  2 ++
 arch/arm/mach-mx3/mm.c                  |  2 ++
 arch/arm/plat-mxc/include/mach/common.h |  1 +
 arch/arm/plat-mxc/system.c              | 22 +++++++++++++---------
 5 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 7622c9b38c9..bbb6c7b8766 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -41,6 +41,7 @@ static struct map_desc imx_io_desc[] __initdata = {
 void __init mx1_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX1);
+	mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
 
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index 169372f69d8..bdc5a6e67be 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -72,6 +72,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
 void __init mx21_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX21);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
@@ -79,6 +80,7 @@ void __init mx21_map_io(void)
 void __init mx27_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX27);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 1f5fdd456cb..f0d5ae533b4 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -75,6 +75,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
 void __init mx31_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
@@ -82,6 +83,7 @@ void __init mx31_map_io(void)
 void __init mx35_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 1c48aefe4b6..1dc31d6dd43 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -29,5 +29,6 @@ extern int mx35_clocks_init(void);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
+extern void mxc_arch_reset_init(void __iomem *);
 
 #endif
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 79c37577c91..15e30532f4a 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -30,29 +30,28 @@
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
-#ifdef CONFIG_ARCH_MX1
-#define WDOG_WCR_REG		IO_ADDRESS(WDT_BASE_ADDR)
-#define WDOG_WCR_ENABLE		(1 << 0)
-#else
-#define WDOG_WCR_REG		IO_ADDRESS(WDOG_BASE_ADDR)
-#define WDOG_WCR_ENABLE		(1 << 2)
-#endif
+static void __iomem *wdog_base;
 
 /*
  * Reset the system. It is called by machine_restart().
  */
 void arch_reset(char mode, const char *cmd)
 {
-	if (!cpu_is_mx1()) {
+	unsigned int wcr_enable;
+
+	if (cpu_is_mx1()) {
+		wcr_enable = (1 << 0);
+	} else {
 		struct clk *clk;
 
 		clk = clk_get_sys("imx-wdt.0", NULL);
 		if (!IS_ERR(clk))
 			clk_enable(clk);
+		wcr_enable = (1 << 2);
 	}
 
 	/* Assert SRS signal */
-	__raw_writew(WDOG_WCR_ENABLE, WDOG_WCR_REG);
+	__raw_writew(wcr_enable, wdog_base);
 
 	/* wait for reset to assert... */
 	mdelay(500);
@@ -65,3 +64,8 @@ void arch_reset(char mode, const char *cmd)
 	/* we'll take a jump through zero as a poor second */
 	cpu_reset(0);
 }
+
+void mxc_arch_reset_init(void __iomem *base)
+{
+	wdog_base = base;
+}
-- 
GitLab


From abae61305684fffb0f1d779a1a678855ec5e8cfc Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 17:22:18 +0200
Subject: [PATCH 125/257] mxc: remove ARCH_NR_GPIOS

Use the default value of 256 which is enough for all i.MX SoCs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/mx27.h | 3 ---
 arch/arm/plat-mxc/include/mach/mx3x.h | 3 ---
 2 files changed, 6 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 6e93f2c0b7b..063ac352465 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -120,7 +120,4 @@ extern int mx27_revision(void);
 
 /* Mandatory defines used globally */
 
-/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
-#define ARCH_NR_GPIOS		(192 + 16)
-
 #endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index b559a4bb576..44ca1b700f0 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -279,9 +279,6 @@
 
 /* Mandatory defines used globally */
 
-/* this CPU supports up to 96 GPIOs */
-#define ARCH_NR_GPIOS		96
-
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 
 extern unsigned int system_rev;
-- 
GitLab


From d30c74a02f7652e784c32a10736a3c88db98820c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 13:29:57 +0200
Subject: [PATCH 126/257] MXC uncompress macros: determine uart base by machine
 type

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/uncompress.h | 60 ++++++++++++++-------
 1 file changed, 42 insertions(+), 18 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index de6fe036598..98c8a60214d 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -26,8 +26,11 @@
 #define __MXC_BOOT_UNCOMPRESS
 
 #include <mach/hardware.h>
+#include <asm/mach-types.h>
 
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+static unsigned long uart_base;
+
+#define UART(x) (*(volatile unsigned long *)(uart_base + (x)))
 
 #define USR2 0x98
 #define USR2_TXFE (1<<14)
@@ -46,19 +49,10 @@
 
 static void putc(int ch)
 {
-	static unsigned long serial_port = 0;
-
-	if (unlikely(serial_port == 0)) {
-		do {
-			serial_port = UART1_BASE_ADDR;
-			if (UART(UCR1) & UCR1_UARTEN)
-				break;
-			serial_port = UART2_BASE_ADDR;
-			if (UART(UCR1) & UCR1_UARTEN)
-				break;
-			return;
-		} while (0);
-	}
+	if (!uart_base)
+		return;
+	if (!(UART(UCR1) & UCR1_UARTEN))
+		return;
 
 	while (!(UART(USR2) & USR2_TXFE))
 		barrier();
@@ -68,11 +62,41 @@ static void putc(int ch)
 
 #define flush() do { } while (0)
 
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
+#define MX1_UART1_BASE_ADDR	0x00206000
+#define MX2X_UART1_BASE_ADDR	0x1000a000
+#define MX3X_UART1_BASE_ADDR	0x43F90000
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	switch (arch_id) {
+	case MACH_TYPE_MX1ADS:
+	case MACH_TYPE_SCB9328:
+		uart_base = MX1_UART1_BASE_ADDR;
+		break;
+	case MACH_TYPE_IMX27LITE:
+	case MACH_TYPE_MX27_3DS:
+	case MACH_TYPE_MX27ADS:
+	case MACH_TYPE_PCM038:
+	case MACH_TYPE_MX21ADS:
+		uart_base = MX2X_UART1_BASE_ADDR;
+		break;
+	case MACH_TYPE_MX31LITE:
+	case MACH_TYPE_ARMADILLO5X0:
+	case MACH_TYPE_MX31MOBOARD:
+	case MACH_TYPE_QONG:
+	case MACH_TYPE_MX31_3DS:
+	case MACH_TYPE_PCM037:
+	case MACH_TYPE_MX31ADS:
+	case MACH_TYPE_MX35_3DS:
+	case MACH_TYPE_PCM043:
+		uart_base = MX3X_UART1_BASE_ADDR;
+		break;
+	default:
+		break;
+	}
+}
 
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
 #define arch_decomp_wdog()
 
 #endif				/* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
-- 
GitLab


From ccc1a6f8eebf0eb8a5bee16293d1dc9b5eab1be3 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 13:45:37 +0200
Subject: [PATCH 127/257] MXC: remove board specific setup of
 MXC_LL_UART_[PV]ADDR

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../include/mach/board-armadillo5x0.h         |  7 ---
 .../arm/plat-mxc/include/mach/board-mx21ads.h |  6 --
 .../arm/plat-mxc/include/mach/board-mx27ads.h |  6 --
 .../plat-mxc/include/mach/board-mx27lite.h    |  5 --
 .../arm/plat-mxc/include/mach/board-mx27pdk.h |  5 --
 .../arm/plat-mxc/include/mach/board-mx31ads.h |  5 --
 .../plat-mxc/include/mach/board-mx31lilly.h   |  5 --
 .../plat-mxc/include/mach/board-mx31lite.h    |  3 -
 .../plat-mxc/include/mach/board-mx31moboard.h |  5 --
 .../arm/plat-mxc/include/mach/board-mx31pdk.h |  5 --
 .../arm/plat-mxc/include/mach/board-mx35pdk.h |  5 --
 arch/arm/plat-mxc/include/mach/board-pcm037.h |  5 --
 arch/arm/plat-mxc/include/mach/board-pcm038.h |  5 --
 arch/arm/plat-mxc/include/mach/board-pcm043.h |  5 --
 arch/arm/plat-mxc/include/mach/board-qong.h   |  5 --
 arch/arm/plat-mxc/include/mach/debug-macro.S  | 59 +++++++------------
 arch/arm/plat-mxc/include/mach/mx1.h          |  4 --
 17 files changed, 21 insertions(+), 119 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
index 8769e910e55..0376c133c9f 100644
--- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
+++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
@@ -12,11 +12,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
 #define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
 
-#include <mach/hardware.h>
-
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
index 06701df74c4..0cf4fa29510 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
@@ -14,12 +14,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
 #define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
 
-/*
- * MXC UART EVB board level configurations
- */
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
 /*
  * Memory-mapped I/O on MX21ADS base board
  */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index d42f4e6116f..7776d230327 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -25,12 +25,6 @@
 #define MXC_MAX_BOARD_INTS      (MXC_MAX_EXP_IO_LINES + \
 				MXC_MAX_VIRTUAL_INTS)
 
-/*
- * MXC UART EVB board level configurations
- */
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
 /*
  * @name Memory Size parameters
  */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
index a870f8ea244..ea87551d273 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
@@ -11,9 +11,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
index 552b55d714d..fec1bcfa916 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
@@ -11,9 +11,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 06e6895f7f6..2cbfa35e82f 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -114,9 +114,4 @@
 
 #define MXC_MAX_EXP_IO_LINES	16
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
index 78cf31e22e4..eb5a5024622 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -22,11 +22,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 
 enum mx31lilly_boards {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 52fbdf2d6f2..8e64325d690 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -11,8 +11,5 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index 303fd2434a2..d5be6b5a6ac 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -19,11 +19,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 #define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 
 enum mx31moboard_boards {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
index 519bab3eb28..2bbd6ed17f5 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -11,11 +11,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 /* Definitions for components on the Debug board */
 
 /* Base address of CPLD controller on the Debug board */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
index 1111037d6d9..383f1c04df0 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index f0a1fa1938a..13411709b13 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
 #define __ASM_ARCH_MXC_BOARD_PCM037_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 4fcd7499e09..410f9786ed2 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -19,11 +19,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
 #define __ASM_ARCH_MXC_BOARD_PCM038_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 /*
  * This CPU module needs a baseboard to work. After basic initializing
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
index 15fbdf16abc..1ac4e1682e5 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm043.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
 #define __ASM_ARCH_MXC_BOARD_PCM043_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
index 04033ec637d..6d88c7af4b2 100644
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -11,11 +11,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
 #define __ASM_ARCH_MXC_BOARD_QONG_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 /* NOR FLASH */
 #define QONG_NOR_SIZE		(128*1024*1024)
 
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index bbc5f6753cf..4f85acd74af 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -11,52 +11,35 @@
  *
  */
 
-#include <mach/hardware.h>
-
-#ifdef CONFIG_MACH_MX31ADS
-#include <mach/board-mx31ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM037
-#include <mach/board-pcm037.h>
-#endif
-#ifdef CONFIG_MACH_MX31LITE
-#include <mach/board-mx31lite.h>
-#endif
-#ifdef CONFIG_MACH_MX27ADS
-#include <mach/board-mx27ads.h>
-#endif
-#ifdef CONFIG_MACH_MX21ADS
-#include <mach/board-mx21ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM038
-#include <mach/board-pcm038.h>
+#ifdef CONFIG_ARCH_MX1
+#include <mach/mx1.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
 #endif
-#ifdef CONFIG_MACH_MX31_3DS
-#include <mach/board-mx31pdk.h>
-#endif
-#ifdef CONFIG_MACH_QONG
-#include <mach/board-qong.h>
-#endif
-#ifdef CONFIG_MACH_PCM043
-#include <mach/board-pcm043.h>
-#endif
-#ifdef CONFIG_MACH_MX27_3DS
-#include <mach/board-mx27pdk.h>
+
+#ifdef CONFIG_ARCH_MX2
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#ifdef CONFIG_MACH_ARMADILLO5X0
-#include <mach/board-armadillo5x0.h>
+#include <mach/mx2x.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	AIPI_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
-#ifdef CONFIG_MACH_MX35_3DS
-#include <mach/board-mx35pdk.h>
+
+#ifdef CONFIG_ARCH_MX3
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#ifdef CONFIG_MACH_MX27LITE
-#include <mach/board-mx27lite.h>
+#include <mach/mx3x.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
+
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =MXC_LL_UART_PADDR	@ physical
-		ldrne	\rx, =MXC_LL_UART_VADDR	@ virtual
+		ldreq	\rx, =UART_PADDR	@ physical
+		ldrne	\rx, =UART_VADDR	@ virtual
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 1000bf330bc..786836965cf 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -179,8 +179,4 @@
 #define DMA_REQ_UART1_T		30
 #define DMA_REQ_UART1_R		31
 
-/* mandatory for CONFIG_DEBUG_LL */
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /*  __ASM_ARCH_MXC_MX1_H__ */
-- 
GitLab


From 37d6fb629eb272a91a3c43033f495a66da2392b5 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 27 May 2009 18:23:48 +0200
Subject: [PATCH 128/257] i.MX serial: do not use #ifdef CONFIG_ARCH_*

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/serial/imx.c | 65 +++++++++++++++-----------------------------
 1 file changed, 22 insertions(+), 43 deletions(-)

diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 5d7b58f1fe4..7485afd0df4 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -67,21 +67,8 @@
 #define UBIR  0xa4 /* BRM Incremental Register */
 #define UBMR  0xa8 /* BRM Modulator Register */
 #define UBRC  0xac /* Baud Rate Count Register */
-#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
-#define ONEMS 0xb0 /* One Millisecond register */
-#define UTS   0xb4 /* UART Test Register */
-#endif
-#ifdef CONFIG_ARCH_MX1
-#define BIPR1 0xb0 /* Incremental Preset Register 1 */
-#define BIPR2 0xb4 /* Incremental Preset Register 2 */
-#define BIPR3 0xb8 /* Incremental Preset Register 3 */
-#define BIPR4 0xbc /* Incremental Preset Register 4 */
-#define BMPR1 0xc0 /* BRM Modulator Register 1 */
-#define BMPR2 0xc4 /* BRM Modulator Register 2 */
-#define BMPR3 0xc8 /* BRM Modulator Register 3 */
-#define BMPR4 0xcc /* BRM Modulator Register 4 */
-#define UTS   0xd0 /* UART Test Register */
-#endif
+#define MX2_ONEMS 0xb0 /* One Millisecond register */
+#define UTS (cpu_is_mx1() ? 0xd0 : 0xb4) /* UART Test Register */
 
 /* UART Control Register Bit Fields.*/
 #define  URXD_CHARRDY    (1<<15)
@@ -101,12 +88,7 @@
 #define  UCR1_RTSDEN     (1<<5)	 /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)	 /* Send break */
 #define  UCR1_TDMAEN     (1<<3)	 /* Transmitter ready DMA enable */
-#ifdef CONFIG_ARCH_MX1
-#define  UCR1_UARTCLKEN  (1<<2)	 /* UART clock enabled */
-#endif
-#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
-#define  UCR1_UARTCLKEN  (0)	 /* not present on mx2/mx3 */
-#endif
+#define  MX1_UCR1_UARTCLKEN  (1<<2)	 /* UART clock enabled, mx1 only */
 #define  UCR1_DOZE       (1<<1)	 /* Doze */
 #define  UCR1_UARTEN     (1<<0)	 /* UART enabled */
 #define  UCR2_ESCI     	 (1<<15) /* Escape seq interrupt enable */
@@ -132,13 +114,9 @@
 #define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_MX1
-#define  UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz, only on mx1 */
-#define  UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
-#endif
-#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
-#define  UCR3_RXDMUXSEL	 (1<<2)  /* RXD Muxed Input Select, on mx2/mx3 */
-#endif
+#define  MX1_UCR3_REF25 	 (1<<3)  /* Ref freq 25 MHz, only on mx1 */
+#define  MX1_UCR3_REF30 	 (1<<2)  /* Ref Freq 30 MHz, only on mx1 */
+#define  MX2_UCR3_RXDMUXSEL	 (1<<2)  /* RXD Muxed Input Select, on mx2/mx3 */
 #define  UCR3_INVT  	 (1<<1)  /* Inverted Infrared transmission */
 #define  UCR3_BPEN  	 (1<<0)  /* Preset registers enable */
 #define  UCR4_CTSTL_32   (32<<10) /* CTS trigger level (32 chars) */
@@ -186,12 +164,10 @@
 #define  UTS_SOFTRST	 (1<<0)	 /* Software reset */
 
 /* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_MXC
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START	        16
 #define DEV_NAME		"ttymxc"
 #define MAX_INTERNAL_IRQ	MXC_INTERNAL_IRQS
-#endif
 
 /*
  * This determines how often we check the modem status signals
@@ -706,11 +682,11 @@ static int imx_startup(struct uart_port *port)
 		}
 	}
 
-#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3
-	temp = readl(sport->port.membase + UCR3);
-	temp |= UCR3_RXDMUXSEL;
-	writel(temp, sport->port.membase + UCR3);
-#endif
+	if (!cpu_is_mx1()) {
+		temp = readl(sport->port.membase + UCR3);
+		temp |= MX2_UCR3_RXDMUXSEL;
+		writel(temp, sport->port.membase + UCR3);
+	}
 
 	if (USE_IRDA(sport)) {
 		temp = readl(sport->port.membase + UCR4);
@@ -942,9 +918,9 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	writel(num, sport->port.membase + UBIR);
 	writel(denom, sport->port.membase + UBMR);
 
-#ifdef ONEMS
-	writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS);
-#endif
+	if (!cpu_is_mx1())
+		writel(sport->port.uartclk / div / 1000,
+				sport->port.membase + MX2_ONEMS);
 
 	writel(old_ucr1, sport->port.membase + UCR1);
 
@@ -1074,17 +1050,20 @@ static void
 imx_console_write(struct console *co, const char *s, unsigned int count)
 {
 	struct imx_port *sport = imx_ports[co->index];
-	unsigned int old_ucr1, old_ucr2;
+	unsigned int old_ucr1, old_ucr2, ucr1;
 
 	/*
 	 *	First, save UCR1/2 and then disable interrupts
 	 */
-	old_ucr1 = readl(sport->port.membase + UCR1);
+	ucr1 = old_ucr1 = readl(sport->port.membase + UCR1);
 	old_ucr2 = readl(sport->port.membase + UCR2);
 
-	writel((old_ucr1 | UCR1_UARTCLKEN | UCR1_UARTEN) &
-		~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN),
-		sport->port.membase + UCR1);
+	if (cpu_is_mx1())
+		ucr1 |= MX1_UCR1_UARTCLKEN;
+	ucr1 |= UCR1_UARTEN;
+	ucr1 &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
+
+	writel(ucr1, sport->port.membase + UCR1);
 
 	writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2);
 
-- 
GitLab


From 12308dfe3776ff5741fc675f2a352165e1628098 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 27 May 2009 18:33:58 +0200
Subject: [PATCH 129/257] mxc: remove do not include directly

Everyone should be free to include the files he actually needs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/mx1.h  | 4 ----
 arch/arm/plat-mxc/include/mach/mx21.h | 5 -----
 arch/arm/plat-mxc/include/mach/mx27.h | 4 ----
 arch/arm/plat-mxc/include/mach/mx2x.h | 4 ----
 arch/arm/plat-mxc/include/mach/mx3x.h | 4 ----
 5 files changed, 21 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 786836965cf..ee60d64728c 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -12,10 +12,6 @@
 #ifndef __ASM_ARCH_MXC_MX1_H__
 #define __ASM_ARCH_MXC_MX1_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 #include <mach/vmalloc.h>
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 8b070a041a9..21112c695ec 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -25,11 +25,6 @@
 #ifndef __ASM_ARCH_MXC_MX21_H__
 #define __ASM_ARCH_MXC_MX21_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-
 /* Memory regions and CS */
 #define SDRAM_BASE_ADDR         0xC0000000
 #define CSD1_BASE_ADDR          0xC4000000
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 063ac352465..dc3ad9aa952 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -24,10 +24,6 @@
 #ifndef __ASM_ARCH_MXC_MX27_H__
 #define __ASM_ARCH_MXC_MX27_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /* IRAM */
 #define IRAM_BASE_ADDR          0xFFFF4C00	/* internal ram */
 
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index fc40d3ab8c5..5982ae5a00d 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -23,10 +23,6 @@
 #ifndef __ASM_ARCH_MXC_MX2x_H__
 #define __ASM_ARCH_MXC_MX2x_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /* The following addresses are common between i.MX21 and i.MX27 */
 
 /* Register offests */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 44ca1b700f0..16f68e8f4cf 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -11,10 +11,6 @@
 #ifndef __ASM_ARCH_MXC_MX31_H__
 #define __ASM_ARCH_MXC_MX31_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /*
  * MX31 memory map:
  *
-- 
GitLab


From c5aa0ad0c557c63dcaf8c8d75a3dd4c5e90724b3 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 17:36:19 +0200
Subject: [PATCH 130/257] mxc: turn to soc specific init_irq functions

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/generic.c             |  6 ++++++
 arch/arm/mach-mx1/mx1ads.c              |  4 ++--
 arch/arm/mach-mx1/scb9328.c             |  2 +-
 arch/arm/mach-mx2/generic.c             | 10 ++++++++++
 arch/arm/mach-mx2/mx21ads.c             |  2 +-
 arch/arm/mach-mx2/mx27ads.c             |  2 +-
 arch/arm/mach-mx2/mx27lite.c            |  2 +-
 arch/arm/mach-mx2/mx27pdk.c             |  2 +-
 arch/arm/mach-mx2/pcm038.c              |  2 +-
 arch/arm/mach-mx3/armadillo5x0.c        |  2 +-
 arch/arm/mach-mx3/mm.c                  | 10 ++++++++++
 arch/arm/mach-mx3/mx31ads.c             |  2 +-
 arch/arm/mach-mx3/mx31lilly.c           |  2 +-
 arch/arm/mach-mx3/mx31lite.c            |  2 +-
 arch/arm/mach-mx3/mx31moboard.c         |  3 ++-
 arch/arm/mach-mx3/mx31pdk.c             |  2 +-
 arch/arm/mach-mx3/mx35pdk.c             |  2 +-
 arch/arm/mach-mx3/pcm037.c              |  2 +-
 arch/arm/mach-mx3/pcm043.c              |  2 +-
 arch/arm/mach-mx3/qong.c                |  2 +-
 arch/arm/plat-mxc/include/mach/common.h |  7 ++++++-
 arch/arm/plat-mxc/irq.c                 |  4 ++--
 22 files changed, 53 insertions(+), 21 deletions(-)

diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index bbb6c7b8766..7f9fc1034c0 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -45,3 +45,9 @@ void __init mx1_map_io(void)
 
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
+
+void __init mx1_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index e5b0c0a83c3..6af064d19b0 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -151,7 +151,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
 MACHINE_END
@@ -161,7 +161,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 20e0b5bcdff..125d495e9c7 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -154,7 +154,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
 	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
 	.boot_params	= 0x08000100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &scb9328_timer,
 	.init_machine	= scb9328_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index bdc5a6e67be..ae8f759134d 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -85,3 +85,13 @@ void __init mx27_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+void __init mx27_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx21_init_irq(void)
+{
+	mx27_init_irq();
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
index a5ee461cb40..a525783ceea 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -280,7 +280,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx21ads_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx21_init_irq,
 	.init_machine   = mx21ads_board_init,
 	.timer          = &mx21ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 02daddac699..a9f69eb58b7 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -330,7 +330,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27ads_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27ads_board_init,
 	.timer          = &mx27ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
index 3ae11cb8c04..82ea227ea0c 100644
--- a/arch/arm/mach-mx2/mx27lite.c
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -89,7 +89,7 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27lite_init,
 	.timer          = &mx27lite_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
index 1d9238c7a6c..6761d1b79e4 100644
--- a/arch/arm/mach-mx2/mx27pdk.c
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -89,7 +89,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27pdk_init,
 	.timer          = &mx27pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index a4628d00434..638d078304c 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -241,7 +241,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = pcm038_init,
 	.timer          = &pcm038_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index ee331fd6b1b..776c0ee1b3c 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -352,7 +352,7 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.map_io		= mx31_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx31_init_irq,
 	.timer		= &armadillo5x0_timer,
 	.init_machine	= armadillo5x0_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index f0d5ae533b4..c327172159c 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -88,6 +88,16 @@ void __init mx35_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+void __init mx31_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx35_init_irq(void)
+{
+	mx31_init_irq();
+}
+
 #ifdef CONFIG_CACHE_L2X0
 static int mxc_init_l2x0(void)
 {
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 30e2767a78a..0497c152be1 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -517,7 +517,7 @@ static void __init mx31ads_map_io(void)
 
 static void __init mx31ads_init_irq(void)
 {
-	mxc_init_irq();
+	mx31_init_irq();
 	mx31ads_init_expio();
 }
 
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
index 6ab2f163cb9..423025150f6 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -148,7 +148,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx31_init_irq,
 	.init_machine	= mx31lilly_board_init,
 	.timer		= &mx31lilly_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 86fe70fa3e1..b1c0afc40cf 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -162,7 +162,7 @@ MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31lite_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31lite_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index a17f2e41160..b86b8a757c9 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -36,6 +36,7 @@
 #include <mach/iomux-mx3.h>
 #include <mach/i2c.h>
 #include <mach/mmc.h>
+#include <mach/mx31.h>
 
 #include "devices.h"
 
@@ -197,7 +198,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31moboard_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index c19838d2e36..0f7a2f06bc2 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -265,7 +265,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31pdk_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
index 6d15374414b..6ff186e46ce 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -98,7 +98,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx35_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx35pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 840cfda341d..d8472206de9 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -592,7 +592,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index 8d27c324abf..7c7d3cc07b8 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -245,7 +245,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx35_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm043_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 82b31c4ab11..0bca4d914ab 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -280,7 +280,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &qong_timer,
 MACHINE_END
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 1dc31d6dd43..cd8f215c1ad 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -19,7 +19,12 @@ extern void mx21_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
-extern void mxc_init_irq(void);
+extern void mxc_init_irq(void __iomem *);
+extern void mx1_init_irq(void);
+extern void mx21_init_irq(void);
+extern void mx27_init_irq(void);
+extern void mx31_init_irq(void);
+extern void mx35_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 8aee76304f8..618a8b24ed1 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -113,11 +113,11 @@ static struct irq_chip mxc_avic_chip = {
  * interrupts. It registers the interrupt enable and disable functions
  * to the kernel for each interrupt source.
  */
-void __init mxc_init_irq(void)
+void __init mxc_init_irq(void __iomem *irqbase)
 {
 	int i;
 
-	avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+	avic_base = irqbase;
 
 	/* put the AVIC into the reset value with
 	 * all interrupts disabled
-- 
GitLab


From 997d74b18ae1d0d8f4c4469a5d1ce8d73ca8402c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 10:32:08 +0200
Subject: [PATCH 131/257] MXC iomux-v3: Fix defines for PAD_CTL registers

The old defines leaked in from an old version of the patch.
Change the defines to match the register layout of the iomuxer.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-v3.h | 30 ++++++++++-------------
 1 file changed, 13 insertions(+), 17 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 7cd84547658..cd06df9370c 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -68,28 +68,24 @@ struct pad_desc {
 /*
  * Use to set PAD control
  */
-#define PAD_CTL_DRIVE_VOLTAGE_3_3_V	0
-#define PAD_CTL_DRIVE_VOLTAGE_1_8_V	1
 
-#define PAD_CTL_NO_HYSTERESIS		0
-#define PAD_CTL_HYSTERESIS		1
+#define PAD_CTL_DVS			(1 << 13)
+#define PAD_CTL_HYS			(1 << 8)
 
-#define PAD_CTL_PULL_DISABLED		0x0
-#define PAD_CTL_PULL_KEEPER		0xa
-#define PAD_CTL_PULL_DOWN_100K		0xc
-#define PAD_CTL_PULL_UP_47K		0xd
-#define PAD_CTL_PULL_UP_100K		0xe
-#define PAD_CTL_PULL_UP_22K		0xf
+#define PAD_CTL_PKE			(1 << 7)
+#define PAD_CTL_PUE			(1 << 6)
+#define PAD_CTL_PUS_100K_DOWN		(0 << 4)
+#define PAD_CTL_PUS_47K_UP		(1 << 4)
+#define PAD_CTL_PUS_100K_UP		(2 << 4)
+#define PAD_CTL_PUS_22K_UP		(3 << 4)
 
-#define PAD_CTL_OUTPUT_CMOS		0
-#define PAD_CTL_OUTPUT_OPEN_DRAIN	1
+#define PAD_CTL_ODE			(1 << 3)
 
-#define PAD_CTL_DRIVE_STRENGTH_NORM	0
-#define PAD_CTL_DRIVE_STRENGTH_HIGH	1
-#define PAD_CTL_DRIVE_STRENGTH_MAX	2
+#define PAD_CTL_DSE_STANDARD		(0 << 1)
+#define PAD_CTL_DSE_HIGH		(1 << 1)
+#define PAD_CTL_DSE_MAX			(2 << 1)
 
-#define PAD_CTL_SLEW_RATE_SLOW		0
-#define PAD_CTL_SLEW_RATE_FAST		1
+#define PAD_CTL_SRE_FAST		(1 << 0)
 
 /*
  * setups a single pad:
-- 
GitLab


From aa68c02777702f05ea5f075e3001288c30ffcb1c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 11:52:26 +0200
Subject: [PATCH 132/257] mx2: remove mxc_irda platform device

Irda support is handled by the normal ims serial driver, so
we do not need this device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 24 ------------------------
 arch/arm/mach-mx2/devices.h |  1 -
 2 files changed, 25 deletions(-)

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index a0f1b367432..e6f0f4f1558 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -39,30 +39,6 @@
 
 #include "devices.h"
 
-/*
- * Resource definition for the MXC IrDA
- */
-static struct resource mxc_irda_resources[] = {
-	[0] = {
-		.start   = UART3_BASE_ADDR,
-		.end     = UART3_BASE_ADDR + SZ_4K - 1,
-		.flags   = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start   = MXC_INT_UART3,
-		.end     = MXC_INT_UART3,
-		.flags   = IORESOURCE_IRQ,
-	},
-};
-
-/* Platform Data for MXC IrDA */
-struct platform_device mxc_irda_device = {
-	.name = "mxc_irda",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_irda_resources),
-	.resource = mxc_irda_resources,
-};
-
 /*
  * General Purpose Timer
  * - i.MX1: 2 timer (slighly different register handling)
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 049005bb6aa..c79ba7fed1b 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -4,7 +4,6 @@ extern struct platform_device mxc_gpt3;
 extern struct platform_device mxc_gpt4;
 extern struct platform_device mxc_gpt5;
 extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_irda_device;
 extern struct platform_device mxc_uart_device0;
 extern struct platform_device mxc_uart_device1;
 extern struct platform_device mxc_uart_device2;
-- 
GitLab


From bf50bcc242db7f8d2fb6bc099c1693149d9fb5d5 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 12:04:36 +0200
Subject: [PATCH 133/257] mx2: Codingstyle: Let the compiler count arrays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 165 ++++++++++++++++--------------------
 1 file changed, 73 insertions(+), 92 deletions(-)

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index e6f0f4f1558..cbf42467466 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -41,20 +41,18 @@
 
 /*
  * General Purpose Timer
- * - i.MX1: 2 timer (slighly different register handling)
- * - i.MX21: 3 timer
- * - i.MX27: 6 timer
+ * - i.MX21: 3 timers
+ * - i.MX27: 6 timers
  */
 
 /* We use gpt0 as system timer, so do not add a device for this one */
 
 static struct resource timer1_resources[] = {
-	[0] = {
+	{
 		.start	= GPT2_BASE_ADDR,
 		.end	= GPT2_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT2,
 		.end     = MXC_INT_GPT2,
 		.flags   = IORESOURCE_IRQ,
@@ -65,16 +63,15 @@ struct platform_device mxc_gpt1 = {
 	.name = "imx_gpt",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(timer1_resources),
-	.resource = timer1_resources
+	.resource = timer1_resources,
 };
 
 static struct resource timer2_resources[] = {
-	[0] = {
+	{
 		.start	= GPT3_BASE_ADDR,
 		.end	= GPT3_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT3,
 		.end     = MXC_INT_GPT3,
 		.flags   = IORESOURCE_IRQ,
@@ -85,17 +82,16 @@ struct platform_device mxc_gpt2 = {
 	.name = "imx_gpt",
 	.id = 2,
 	.num_resources = ARRAY_SIZE(timer2_resources),
-	.resource = timer2_resources
+	.resource = timer2_resources,
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource timer3_resources[] = {
-	[0] = {
+	{
 		.start	= GPT4_BASE_ADDR,
 		.end	= GPT4_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT4,
 		.end     = MXC_INT_GPT4,
 		.flags   = IORESOURCE_IRQ,
@@ -106,16 +102,15 @@ struct platform_device mxc_gpt3 = {
 	.name = "imx_gpt",
 	.id = 3,
 	.num_resources = ARRAY_SIZE(timer3_resources),
-	.resource = timer3_resources
+	.resource = timer3_resources,
 };
 
 static struct resource timer4_resources[] = {
-	[0] = {
+	{
 		.start	= GPT5_BASE_ADDR,
 		.end	= GPT5_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT5,
 		.end     = MXC_INT_GPT5,
 		.flags   = IORESOURCE_IRQ,
@@ -126,16 +121,15 @@ struct platform_device mxc_gpt4 = {
 	.name = "imx_gpt",
 	.id = 4,
 	.num_resources = ARRAY_SIZE(timer4_resources),
-	.resource = timer4_resources
+	.resource = timer4_resources,
 };
 
 static struct resource timer5_resources[] = {
-	[0] = {
+	{
 		.start	= GPT6_BASE_ADDR,
 		.end	= GPT6_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT6,
 		.end     = MXC_INT_GPT6,
 		.flags   = IORESOURCE_IRQ,
@@ -146,7 +140,7 @@ struct platform_device mxc_gpt5 = {
 	.name = "imx_gpt",
 	.id = 5,
 	.num_resources = ARRAY_SIZE(timer5_resources),
-	.resource = timer5_resources
+	.resource = timer5_resources,
 };
 #endif
 
@@ -190,11 +184,11 @@ static struct resource mxc_nand_resources[] = {
 	{
 		.start	= NFC_BASE_ADDR,
 		.end	= NFC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_NANDFC,
 		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -216,8 +210,7 @@ static struct resource mxc_fb[] = {
 		.start = LCDC_BASE_ADDR,
 		.end   = LCDC_BASE_ADDR + 0xFFF,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_LCDC,
 		.end   = MXC_INT_LCDC,
 		.flags = IORESOURCE_IRQ,
@@ -240,11 +233,11 @@ static struct resource mxc_fec_resources[] = {
 	{
 		.start	= FEC_BASE_ADDR,
 		.end	= FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_FEC,
 		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -257,15 +250,14 @@ struct platform_device mxc_fec_device = {
 #endif
 
 static struct resource mxc_i2c_1_resources[] = {
-	[0] = {
+	{
 		.start	= I2C_BASE_ADDR,
 		.end	= I2C_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start	= MXC_INT_I2C,
 		.end	= MXC_INT_I2C,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	}
 };
 
@@ -273,20 +265,19 @@ struct platform_device mxc_i2c_device0 = {
 	.name = "imx-i2c",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-	.resource = mxc_i2c_1_resources
+	.resource = mxc_i2c_1_resources,
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource mxc_i2c_2_resources[] = {
-	[0] = {
+	{
 		.start	= I2C2_BASE_ADDR,
 		.end	= I2C2_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start	= MXC_INT_I2C2,
 		.end	= MXC_INT_I2C2,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	}
 };
 
@@ -294,17 +285,16 @@ struct platform_device mxc_i2c_device1 = {
 	.name = "imx-i2c",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-	.resource = mxc_i2c_2_resources
+	.resource = mxc_i2c_2_resources,
 };
 #endif
 
 static struct resource mxc_pwm_resources[] = {
-	[0] = {
+	{
 		.start	= PWM_BASE_ADDR,
 		.end	= PWM_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_PWM,
 		.end     = MXC_INT_PWM,
 		.flags   = IORESOURCE_IRQ,
@@ -315,28 +305,26 @@ struct platform_device mxc_pwm_device = {
 	.name = "mxc_pwm",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
-	.resource = mxc_pwm_resources
+	.resource = mxc_pwm_resources,
 };
 
 /*
  * Resource definition for the MXC SDHC
  */
 static struct resource mxc_sdhc1_resources[] = {
-	[0] = {
-			.start = SDHC1_BASE_ADDR,
-			.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-			},
-	[1] = {
-			.start = MXC_INT_SDHC1,
-			.end   = MXC_INT_SDHC1,
-			.flags = IORESOURCE_IRQ,
-			},
-	[2] = {
-			.start  = DMA_REQ_SDHC1,
-			.end    = DMA_REQ_SDHC1,
-			.flags  = IORESOURCE_DMA
-		},
+	{
+		.start = SDHC1_BASE_ADDR,
+		.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_SDHC1,
+		.end   = MXC_INT_SDHC1,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start  = DMA_REQ_SDHC1,
+		.end    = DMA_REQ_SDHC1,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
@@ -353,21 +341,19 @@ struct platform_device mxc_sdhc_device0 = {
 };
 
 static struct resource mxc_sdhc2_resources[] = {
-	[0] = {
-			.start = SDHC2_BASE_ADDR,
-			.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-			},
-	[1] = {
-			.start = MXC_INT_SDHC2,
-			.end   = MXC_INT_SDHC2,
-			.flags = IORESOURCE_IRQ,
-			},
-	[2] = {
-			.start  = DMA_REQ_SDHC2,
-			.end    = DMA_REQ_SDHC2,
-			.flags  = IORESOURCE_DMA
-		},
+	{
+		.start = SDHC2_BASE_ADDR,
+		.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_SDHC2,
+		.end   = MXC_INT_SDHC2,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start  = DMA_REQ_SDHC2,
+		.end    = DMA_REQ_SDHC2,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
@@ -385,33 +371,28 @@ struct platform_device mxc_sdhc_device1 = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.irq = MXC_INT_GPIO,
 		.base = IO_ADDRESS(GPIO_BASE_ADDR),
 		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	},
-	[1] = {
+	}, {
 		.chip.label = "gpio-1",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	},
-	[2] = {
+	}, {
 		.chip.label = "gpio-2",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	},
-	[3] = {
+	}, {
 		.chip.label = "gpio-3",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	},
-	[4] = {
+	}, {
 		.chip.label = "gpio-4",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
-	},
-	[5] = {
+	}, {
 		.chip.label = "gpio-5",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
-- 
GitLab


From 3f4f54b4f0052e9838f6bb98535746464d0c01c3 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 12:12:00 +0200
Subject: [PATCH 134/257] mx3: Codingstyle: Let the compiler count arrays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c  | 25 ++++++++++---------------
 arch/arm/mach-mx3/mx31lite.c |  5 ++---
 arch/arm/mach-mx3/pcm037.c   |  5 ++---
 arch/arm/mach-mx3/qong.c     |  5 ++---
 4 files changed, 16 insertions(+), 24 deletions(-)

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 9e87e08fb12..7a5c2ef52a4 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -129,19 +129,17 @@ struct platform_device mxc_uart_device4 = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.base = IO_ADDRESS(GPIO1_BASE_ADDR),
 		.irq = MXC_INT_GPIO1,
 		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	},
-	[1] = {
+	}, {
 		.chip.label = "gpio-1",
 		.base = IO_ADDRESS(GPIO2_BASE_ADDR),
 		.irq = MXC_INT_GPIO2,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	},
-	[2] = {
+	}, {
 		.chip.label = "gpio-2",
 		.base = IO_ADDRESS(GPIO3_BASE_ADDR),
 		.irq = MXC_INT_GPIO3,
@@ -173,11 +171,11 @@ static struct resource mxc_nand_resources[] = {
 	{
 		.start	= 0, /* runtime dependent */
 		.end	= 0,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_NANDFC,
 		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -193,8 +191,7 @@ static struct resource mxc_i2c0_resources[] = {
 		.start = I2C_BASE_ADDR,
 		.end = I2C_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_I2C,
 		.end = MXC_INT_I2C,
 		.flags = IORESOURCE_IRQ,
@@ -213,8 +210,7 @@ static struct resource mxc_i2c1_resources[] = {
 		.start = I2C2_BASE_ADDR,
 		.end = I2C2_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_I2C2,
 		.end = MXC_INT_I2C2,
 		.flags = IORESOURCE_IRQ,
@@ -233,8 +229,7 @@ static struct resource mxc_i2c2_resources[] = {
 		.start = I2C3_BASE_ADDR,
 		.end = I2C3_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_I2C3,
 		.end = MXC_INT_I2C3,
 		.flags = IORESOURCE_IRQ,
@@ -400,11 +395,11 @@ static struct resource mxc_fec_resources[] = {
 	{
 		.start	= MXC_FEC_BASE_ADDR,
 		.end	= MXC_FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_FEC,
 		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index b1c0afc40cf..a8d57decdfd 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -71,12 +71,11 @@ static struct smsc911x_platform_config smsc911x_config = {
 };
 
 static struct resource smsc911x_resources[] = {
-	[0] = {
+	{
 		.start		= CS4_BASE_ADDR,
 		.end		= CS4_BASE_ADDR + 0x100,
 		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
 		.end		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
 		.flags		= IORESOURCE_IRQ,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index d8472206de9..c755c06b75d 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -244,12 +244,11 @@ static struct imxuart_platform_data uart_pdata = {
 };
 
 static struct resource smsc911x_resources[] = {
-	[0] = {
+	{
 		.start		= CS1_BASE_ADDR + 0x300,
 		.end		= CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
 		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
 		.end		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
 		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 0bca4d914ab..044511f1b9a 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -81,13 +81,12 @@ static inline void mxc_init_imx_uart(void)
 }
 
 static struct resource dnet_resources[] = {
-	[0] = {
+	{
 		.name	= "dnet-memory",
 		.start	= QONG_DNET_BASEADDR,
 		.end	= QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= QONG_FPGA_IRQ,
 		.end	= QONG_FPGA_IRQ,
 		.flags	= IORESOURCE_IRQ,
-- 
GitLab


From 9b0e6db0da1ea433f38b8d952108746f3fc67304 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 12:14:39 +0200
Subject: [PATCH 135/257] mx1: Codingstyle: Let the compiler count arrays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/devices.c | 87 ++++++++++++++-----------------------
 arch/arm/mach-mx1/scb9328.c | 14 +++---
 2 files changed, 39 insertions(+), 62 deletions(-)

diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index 76d1ffb4807..b6be29d1cb0 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -29,12 +29,11 @@
 #include "devices.h"
 
 static struct resource imx_csi_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00224000,
 		.end    = 0x00224010,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = CSI_INT,
 		.end    = CSI_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -55,12 +54,11 @@ struct platform_device imx_csi_device = {
 };
 
 static struct resource imx_i2c_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00217000,
 		.end    = 0x00217010,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = I2C_INT,
 		.end    = I2C_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -75,22 +73,19 @@ struct platform_device imx_i2c_device = {
 };
 
 static struct resource imx_uart1_resources[] = {
-	[0] = {
+	{
 		.start	= UART1_BASE_ADDR,
 		.end	= UART1_BASE_ADDR + 0xD0,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= UART1_MINT_RX,
 		.end	= UART1_MINT_RX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= UART1_MINT_TX,
 		.end	= UART1_MINT_TX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= UART1_MINT_RTS,
 		.end	= UART1_MINT_RTS,
 		.flags	= IORESOURCE_IRQ,
@@ -105,22 +100,19 @@ struct platform_device imx_uart1_device = {
 };
 
 static struct resource imx_uart2_resources[] = {
-	[0] = {
+	{
 		.start	= UART2_BASE_ADDR,
 		.end	= UART2_BASE_ADDR + 0xD0,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= UART2_MINT_RX,
 		.end	= UART2_MINT_RX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= UART2_MINT_TX,
 		.end	= UART2_MINT_TX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= UART2_MINT_RTS,
 		.end	= UART2_MINT_RTS,
 		.flags	= IORESOURCE_IRQ,
@@ -135,17 +127,15 @@ struct platform_device imx_uart2_device = {
 };
 
 static struct resource imx_rtc_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00204000,
 		.end    = 0x00204024,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = RTC_INT,
 		.end    = RTC_INT,
 		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start  = RTC_SAMINT,
 		.end    = RTC_SAMINT,
 		.flags  = IORESOURCE_IRQ,
@@ -160,12 +150,11 @@ struct platform_device imx_rtc_device = {
 };
 
 static struct resource imx_wdt_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00201000,
 		.end    = 0x00201008,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = WDT_INT,
 		.end    = WDT_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -180,42 +169,35 @@ struct platform_device imx_wdt_device = {
 };
 
 static struct resource imx_usb_resources[] = {
-	[0] = {
+	{
 		.start	= 0x00212000,
 		.end	= 0x00212148,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= USBD_INT0,
 		.end	= USBD_INT0,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= USBD_INT1,
 		.end	= USBD_INT1,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= USBD_INT2,
 		.end	= USBD_INT2,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[4] = {
+	}, {
 		.start	= USBD_INT3,
 		.end	= USBD_INT3,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[5] = {
+	}, {
 		.start	= USBD_INT4,
 		.end	= USBD_INT4,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[6] = {
+	}, {
 		.start	= USBD_INT5,
 		.end	= USBD_INT5,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[7] = {
+	}, {
 		.start	= USBD_INT6,
 		.end	= USBD_INT6,
 		.flags	= IORESOURCE_IRQ,
@@ -231,29 +213,26 @@ struct platform_device imx_usb_device = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
 		.irq = GPIO_INT_PORTA,
-		.virtual_irq_start = MXC_GPIO_IRQ_START
-	},
-	[1] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	}, {
 		.chip.label = "gpio-1",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
 		.irq = GPIO_INT_PORTB,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32
-	},
-	[2] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	}, {
 		.chip.label = "gpio-2",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
 		.irq = GPIO_INT_PORTC,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64
-	},
-	[3] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	}, {
 		.chip.label = "gpio-3",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
 		.irq = GPIO_INT_PORTD,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
 	}
 };
 
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 125d495e9c7..325d98df605 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -68,22 +68,20 @@ static struct dm9000_plat_data dm9000_platdata = {
  * to gain access to address latch registers and the data path.
  */
 static struct resource dm9000x_resources[] = {
-	[0] = {
+	{
 		.name	= "address area",
 		.start	= IMX_CS5_PHYS,
 		.end	= IMX_CS5_PHYS + 1,
-		.flags	= IORESOURCE_MEM	/* address access */
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,	/* address access */
+	}, {
 		.name	= "data area",
 		.start	= IMX_CS5_PHYS + 4,
 		.end	= IMX_CS5_PHYS + 5,
-		.flags	= IORESOURCE_MEM	/* data access */
-	},
-	[2] = {
+		.flags	= IORESOURCE_MEM,	/* data access */
+	}, {
 		.start	= IRQ_GPIOC(3),
 		.end	= IRQ_GPIOC(3),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
 
-- 
GitLab


From f497d0153a6b53b4cfd004de5f10b14bf630d852 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 18 Mar 2009 11:29:31 +0100
Subject: [PATCH 136/257] imxfb: calculate bpix value from bits_per_pixel

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/imxfb.h |  3 ++-
 drivers/video/imxfb.c                  | 19 ++++++++++++++++++-
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 9f0101157ec..66259f6158e 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -13,7 +13,8 @@
 #define PCR_BPIX_4	(2 << 25)
 #define PCR_BPIX_8	(3 << 25)
 #define PCR_BPIX_12	(4 << 25)
-#define PCR_BPIX_16	(4 << 25)
+#define PCR_BPIX_16	(5 << 25)
+#define PCR_BPIX_18	(6 << 25)
 #define PCR_PIXPOL	(1 << 24)
 #define PCR_FLMPOL	(1 << 23)
 #define PCR_LPPOL	(1 << 22)
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 15a0ee6d8e2..a8c41cb60ff 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -33,6 +33,7 @@
 #include <linux/math64.h>
 
 #include <mach/imxfb.h>
+#include <mach/hardware.h>
 
 /*
  * Complain if VAR is out of range.
@@ -530,8 +531,24 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 				lcd_clk / pcr);
 	}
 
+	switch (var->bits_per_pixel) {
+	case 32:
+		pcr |= PCR_BPIX_18;
+		break;
+	case 16:
+	default:
+		if (cpu_is_mx1())
+			pcr |= PCR_BPIX_12;
+		else
+			pcr |= PCR_BPIX_16;
+		break;
+	case 8:
+		pcr |= PCR_BPIX_8;
+		break;
+	}
+
 	/* add sync polarities */
-	pcr |= fbi->pcr & ~0x3F;
+	pcr |= fbi->pcr & ~(0x3f | (7 << 25));
 
 	writel(pcr, fbi->regs + LCDC_PCR);
 	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
-- 
GitLab


From d6b515028863a912d051d371b6d71e09f2a9ff19 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 29 Jun 2009 11:41:09 +0200
Subject: [PATCH 137/257] imxfb: use resource_size() macro

This fixes an off-by-one error. Also, use dev_err instead of printk
in probe() function.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/video/imxfb.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index a8c41cb60ff..330857a8b31 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -661,7 +661,7 @@ static int __init imxfb_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret;
 
-	printk("i.MX Framebuffer driver\n");
+	dev_info(&pdev->dev, "i.MX Framebuffer driver\n");
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
@@ -701,7 +701,7 @@ static int __init imxfb_probe(struct platform_device *pdev)
 
 	fbi->regs = ioremap(res->start, resource_size(res));
 	if (fbi->regs == NULL) {
-		printk(KERN_ERR"Cannot map frame buffer registers\n");
+		dev_err(&pdev->dev, "Cannot map frame buffer registers\n");
 		goto failed_ioremap;
 	}
 
@@ -771,7 +771,7 @@ failed_map:
 failed_getclock:
 	iounmap(fbi->regs);
 failed_ioremap:
-	release_mem_region(res->start, res->end - res->start);
+	release_mem_region(res->start, resource_size(res));
 failed_req:
 	kfree(info->pseudo_palette);
 failed_init:
@@ -802,7 +802,7 @@ static int __devexit imxfb_remove(struct platform_device *pdev)
 	framebuffer_release(info);
 
 	iounmap(fbi->regs);
-	release_mem_region(res->start, res->end - res->start + 1);
+	release_mem_region(res->start, resource_size(res));
 	clk_disable(fbi->clk);
 	clk_put(fbi->clk);
 
-- 
GitLab


From 343684ffb793a3c371579b7bbc16724713ee5ac7 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 19 Mar 2009 08:25:41 +0100
Subject: [PATCH 138/257] imxfb: Add support for multiple displays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/mx27ads.c            |  36 +++--
 arch/arm/mach-mx2/pcm970-baseboard.c   |  83 +++++++----
 arch/arm/plat-mxc/include/mach/imxfb.h |  26 ++--
 drivers/video/imxfb.c                  | 191 ++++++++++++++++---------
 4 files changed, 208 insertions(+), 128 deletions(-)

diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index a9f69eb58b7..83e412b713e 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -183,20 +183,29 @@ void lcd_power(int on)
 		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
-static struct imx_fb_platform_data mx27ads_fb_data = {
-	.pixclock	= 188679,
-	.xres		= 240,
-	.yres		= 320,
-
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 9,
-	.right_margin	= 16,
+static struct imx_fb_videomode mx27ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 1,
+			.left_margin	= 9,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFB008BC0,
+	},
+};
 
-	.vsync_len	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 9,
-	.fixed_screen_cpu = 0,
+static struct imx_fb_platform_data mx27ads_fb_data = {
+	.mode = mx27ads_modes,
+	.num_modes = ARRAY_SIZE(mx27ads_modes),
 
 	/*
 	 * - HSYNC active high
@@ -207,7 +216,6 @@ static struct imx_fb_platform_data mx27ads_fb_data = {
 	 * - data enable low active
 	 * - enable sharp mode
 	 */
-	.pcr		= 0xFB008BC0,
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 6a3acaf57dd..8e2bc94f1a0 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -125,35 +125,64 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc2_exit,
 };
 
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DH06
- */
-static struct imx_fb_platform_data pcm038_fb_data = {
-	.pixclock	= 188679, /* in ps (5.3MHz) */
-	.xres		= 240,
-	.yres		= 320,
-
-	.bpp		= 16,
-	.hsync_len	= 7,
-	.left_margin	= 5,
-	.right_margin	= 16,
+static struct imx_fb_videomode pcm970_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 7,
+			.left_margin	= 5,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		/*
+		 * - HSYNC active high
+		 * - VSYNC active high
+		 * - clk notenabled while idle
+		 * - clock not inverted
+		 * - data not inverted
+		 * - data enable low active
+		 * - enable sharp mode
+		 */
+		.pcr		= 0xF00080C0,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "TX090",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 38255,
+			.left_margin	= 144,
+			.right_margin	= 0,
+			.upper_margin	= 7,
+			.lower_margin	= 40,
+			.hsync_len	= 96,
+			.vsync_len	= 1,
+		},
+		/*
+		 * - HSYNC active low (1 << 22)
+		 * - VSYNC active low (1 << 23)
+		 * - clk notenabled while idle
+		 * - clock not inverted
+		 * - data not inverted
+		 * - data enable low active
+		 * - enable sharp mode
+		 */
+		.pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
+		.bpp = 32,
+	},
+};
 
-	.vsync_len	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 9,
-	.fixed_screen_cpu = 0,
+static struct imx_fb_platform_data pcm038_fb_data = {
+	.mode = pcm970_modes,
+	.num_modes = ARRAY_SIZE(pcm970_modes),
 
-	/*
-	 * - HSYNC active high
-	 * - VSYNC active high
-	 * - clk notenabled while idle
-	 * - clock not inverted
-	 * - data not inverted
-	 * - data enable low active
-	 * - enable sharp mode
-	 */
-	.pcr		= 0xFA0080C0,
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 66259f6158e..5263506b7dd 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -2,6 +2,8 @@
  * This structure describes the machine which we are running on.
  */
 
+#include <linux/fb.h>
+
 #define PCR_TFT		(1 << 31)
 #define PCR_COLOR	(1 << 30)
 #define PCR_PBSIZ_1	(0 << 28)
@@ -47,29 +49,21 @@
 #define DMACR_HM(x)	(((x) & 0xf) << 16)
 #define DMACR_TM(x)	((x) & 0xf)
 
-struct imx_fb_platform_data {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_int		nonstd;
-	u_char		bpp;
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
+struct imx_fb_videomode {
+	struct fb_videomode mode;
+	u32 pcr;
+	unsigned char	bpp;
+};
 
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
+struct imx_fb_platform_data {
+	struct imx_fb_videomode *mode;
+	int		num_modes;
 
 	u_int		cmap_greyscale:1,
 			cmap_inverse:1,
 			cmap_static:1,
 			unused:29;
 
-	u_int		pcr;
 	u_int		pwmr;
 	u_int		lscr1;
 	u_int		dmacr;
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 330857a8b31..30ae3022f63 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -130,6 +130,10 @@
 #define LCDISR_EOF	(1<<1)
 #define LCDISR_BOF	(1<<0)
 
+/* Used fb-mode. Can be set on kernel command line, therefore file-static. */
+static const char *fb_mode;
+
+
 /*
  * These are the bitfields for each
  * display depth that we support.
@@ -146,10 +150,6 @@ struct imxfb_info {
 	void __iomem		*regs;
 	struct clk		*clk;
 
-	u_int			max_bpp;
-	u_int			max_xres;
-	u_int			max_yres;
-
 	/*
 	 * These are the addresses we mapped
 	 * the framebuffer memory region to.
@@ -173,6 +173,9 @@ struct imxfb_info {
 				cmap_static:1,
 				unused:30;
 
+	struct imx_fb_videomode *mode;
+	int			num_modes;
+
 	void (*lcd_power)(int);
 	void (*backlight_power)(int);
 };
@@ -299,6 +302,18 @@ static int imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 	return ret;
 }
 
+static const struct imx_fb_videomode *imxfb_find_mode(struct imxfb_info *fbi)
+{
+	struct imx_fb_videomode *m;
+	int i;
+
+	for (i = 0, m = &fbi->mode[0]; i < fbi->num_modes; i++, m++) {
+		if (!strcmp(m->mode.name, fb_mode))
+			return m;
+	}
+	return NULL;
+}
+
 /*
  *  imxfb_check_var():
  *    Round up in the following order: bits_per_pixel, xres,
@@ -309,35 +324,81 @@ static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
 	struct imxfb_info *fbi = info->par;
 	struct imxfb_rgb *rgb;
+	const struct imx_fb_videomode *imxfb_mode;
+	unsigned long lcd_clk;
+	unsigned long long tmp;
+	u32 pcr = 0;
 
 	if (var->xres < MIN_XRES)
 		var->xres = MIN_XRES;
 	if (var->yres < MIN_YRES)
 		var->yres = MIN_YRES;
-	if (var->xres > fbi->max_xres)
-		var->xres = fbi->max_xres;
-	if (var->yres > fbi->max_yres)
-		var->yres = fbi->max_yres;
-	var->xres_virtual = max(var->xres_virtual, var->xres);
-	var->yres_virtual = max(var->yres_virtual, var->yres);
+
+	imxfb_mode = imxfb_find_mode(fbi);
+	if (!imxfb_mode)
+		return -EINVAL;
+
+	var->xres		= imxfb_mode->mode.xres;
+	var->yres		= imxfb_mode->mode.yres;
+	var->bits_per_pixel	= imxfb_mode->bpp;
+	var->pixclock		= imxfb_mode->mode.pixclock;
+	var->hsync_len		= imxfb_mode->mode.hsync_len;
+	var->left_margin	= imxfb_mode->mode.left_margin;
+	var->right_margin	= imxfb_mode->mode.right_margin;
+	var->vsync_len		= imxfb_mode->mode.vsync_len;
+	var->upper_margin	= imxfb_mode->mode.upper_margin;
+	var->lower_margin	= imxfb_mode->mode.lower_margin;
+	var->sync		= imxfb_mode->mode.sync;
+	var->xres_virtual	= max(var->xres_virtual, var->xres);
+	var->yres_virtual	= max(var->yres_virtual, var->yres);
 
 	pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel);
+
+	lcd_clk = clk_get_rate(fbi->clk);
+
+	tmp = var->pixclock * (unsigned long long)lcd_clk;
+
+	do_div(tmp, 1000000);
+
+	if (do_div(tmp, 1000000) > 500000)
+		tmp++;
+
+	pcr = (unsigned int)tmp;
+
+	if (--pcr > 0x3F) {
+		pcr = 0x3F;
+		printk(KERN_WARNING "Must limit pixel clock to %luHz\n",
+				lcd_clk / pcr);
+	}
+
 	switch (var->bits_per_pixel) {
 	case 32:
+		pcr |= PCR_BPIX_18;
 		rgb = &def_rgb_18;
 		break;
 	case 16:
 	default:
-		if (fbi->pcr & PCR_TFT)
+		if (cpu_is_mx1())
+			pcr |= PCR_BPIX_12;
+		else
+			pcr |= PCR_BPIX_16;
+
+		if (imxfb_mode->pcr & PCR_TFT)
 			rgb = &def_rgb_16_tft;
 		else
 			rgb = &def_rgb_16_stn;
 		break;
 	case 8:
+		pcr |= PCR_BPIX_8;
 		rgb = &def_rgb_8;
 		break;
 	}
 
+	/* add sync polarities */
+	pcr |= imxfb_mode->pcr & ~(0x3f | (7 << 25));
+
+	fbi->pcr = pcr;
+
 	/*
 	 * Copy the RGB parameters for this display
 	 * from the machine specific parameters.
@@ -394,10 +455,6 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
 
 	writel(fbi->screen_dma, fbi->regs + LCDC_SSA);
 
-	/* physical screen start address	    */
-	writel(VPW_VPW(fbi->max_xres * fbi->max_bpp / 8 / 4),
-		fbi->regs + LCDC_VPW);
-
 	/* panning offset 0 (0 pixel offset)        */
 	writel(0x00000000, fbi->regs + LCDC_POS);
 
@@ -469,8 +526,6 @@ static struct fb_ops imxfb_ops = {
 static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
 	struct imxfb_info *fbi = info->par;
-	unsigned int pcr, lcd_clk;
-	unsigned long long tmp;
 
 	pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n",
 		var->xres, var->hsync_len,
@@ -506,6 +561,10 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 			info->fix.id, var->lower_margin);
 #endif
 
+	/* physical screen start address	    */
+	writel(VPW_VPW(var->xres * var->bits_per_pixel / 8 / 4),
+		fbi->regs + LCDC_VPW);
+
 	writel(HCR_H_WIDTH(var->hsync_len - 1) |
 		HCR_H_WAIT_1(var->right_margin - 1) |
 		HCR_H_WAIT_2(var->left_margin - 3),
@@ -519,38 +578,7 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 	writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres),
 			fbi->regs + LCDC_SIZE);
 
-	lcd_clk = clk_get_rate(fbi->clk);
-	tmp = var->pixclock * (unsigned long long)lcd_clk;
-	do_div(tmp, 1000000);
-	if (do_div(tmp, 1000000) > 500000)
-		tmp++;
-	pcr = (unsigned int)tmp;
-	if (--pcr > 0x3F) {
-		pcr = 0x3F;
-		printk(KERN_WARNING "Must limit pixel clock to %uHz\n",
-				lcd_clk / pcr);
-	}
-
-	switch (var->bits_per_pixel) {
-	case 32:
-		pcr |= PCR_BPIX_18;
-		break;
-	case 16:
-	default:
-		if (cpu_is_mx1())
-			pcr |= PCR_BPIX_12;
-		else
-			pcr |= PCR_BPIX_16;
-		break;
-	case 8:
-		pcr |= PCR_BPIX_8;
-		break;
-	}
-
-	/* add sync polarities */
-	pcr |= fbi->pcr & ~(0x3f | (7 << 25));
-
-	writel(pcr, fbi->regs + LCDC_PCR);
+	writel(fbi->pcr, fbi->regs + LCDC_PCR);
 	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
 	writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
 	writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
@@ -592,6 +620,8 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev)
 	struct imx_fb_platform_data *pdata = pdev->dev.platform_data;
 	struct fb_info *info = dev_get_drvdata(&pdev->dev);
 	struct imxfb_info *fbi = info->par;
+	struct imx_fb_videomode *m;
+	int i;
 
 	pr_debug("%s\n",__func__);
 
@@ -620,35 +650,18 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev)
 	info->fbops			= &imxfb_ops;
 	info->flags			= FBINFO_FLAG_DEFAULT |
 					  FBINFO_READS_FAST;
-
-	fbi->max_xres			= pdata->xres;
-	info->var.xres			= pdata->xres;
-	info->var.xres_virtual		= pdata->xres;
-	fbi->max_yres			= pdata->yres;
-	info->var.yres			= pdata->yres;
-	info->var.yres_virtual		= pdata->yres;
-	fbi->max_bpp			= pdata->bpp;
-	info->var.bits_per_pixel	= pdata->bpp;
-	info->var.nonstd		= pdata->nonstd;
-	info->var.pixclock		= pdata->pixclock;
-	info->var.hsync_len		= pdata->hsync_len;
-	info->var.left_margin		= pdata->left_margin;
-	info->var.right_margin		= pdata->right_margin;
-	info->var.vsync_len		= pdata->vsync_len;
-	info->var.upper_margin		= pdata->upper_margin;
-	info->var.lower_margin		= pdata->lower_margin;
-	info->var.sync			= pdata->sync;
 	info->var.grayscale		= pdata->cmap_greyscale;
 	fbi->cmap_inverse		= pdata->cmap_inverse;
 	fbi->cmap_static		= pdata->cmap_static;
-	fbi->pcr			= pdata->pcr;
 	fbi->lscr1			= pdata->lscr1;
 	fbi->dmacr			= pdata->dmacr;
 	fbi->pwmr			= pdata->pwmr;
 	fbi->lcd_power			= pdata->lcd_power;
 	fbi->backlight_power		= pdata->backlight_power;
-	info->fix.smem_len		= fbi->max_xres * fbi->max_yres *
-					  fbi->max_bpp / 8;
+
+	for (i = 0, m = &pdata->mode[0]; i < pdata->num_modes; i++, m++)
+		info->fix.smem_len = max_t(size_t, info->fix.smem_len,
+				m->mode.xres * m->mode.yres * m->bpp / 8);
 
 	return 0;
 }
@@ -659,7 +672,7 @@ static int __init imxfb_probe(struct platform_device *pdev)
 	struct fb_info *info;
 	struct imx_fb_platform_data *pdata;
 	struct resource *res;
-	int ret;
+	int ret, i;
 
 	dev_info(&pdev->dev, "i.MX Framebuffer driver\n");
 
@@ -679,6 +692,9 @@ static int __init imxfb_probe(struct platform_device *pdev)
 
 	fbi = info->par;
 
+	if (!fb_mode)
+		fb_mode = pdata->mode[0].mode.name;
+
 	platform_set_drvdata(pdev, info);
 
 	ret = imxfb_init_fbinfo(pdev);
@@ -736,6 +752,13 @@ static int __init imxfb_probe(struct platform_device *pdev)
 			goto failed_platform_init;
 	}
 
+	fbi->mode = pdata->mode;
+	fbi->num_modes = pdata->num_modes;
+
+	INIT_LIST_HEAD(&info->modelist);
+	for (i = 0; i < pdata->num_modes; i++)
+		fb_add_videomode(&pdata->mode[i].mode, &info->modelist);
+
 	/*
 	 * This makes sure that our colour bitfield
 	 * descriptors are correctly initialised.
@@ -828,8 +851,34 @@ static struct platform_driver imxfb_driver = {
 	},
 };
 
+static int imxfb_setup(void)
+{
+#ifndef MODULE
+	char *opt, *options = NULL;
+
+	if (fb_get_options("imxfb", &options))
+		return -ENODEV;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((opt = strsep(&options, ",")) != NULL) {
+		if (!*opt)
+			continue;
+		else
+			fb_mode = opt;
+	}
+#endif
+	return 0;
+}
+
 int __init imxfb_init(void)
 {
+	int ret = imxfb_setup();
+
+	if (ret < 0)
+		return ret;
+
 	return platform_driver_probe(&imxfb_driver, imxfb_probe);
 }
 
-- 
GitLab


From 91bf9a2566a6f507f45ad2fb59802e528f5a9c3f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 13:21:28 +0200
Subject: [PATCH 139/257] pcm037: Add support for SJA1000 on baseboard

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index c755c06b75d..1b9140e2303 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -32,6 +32,7 @@
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
+#include <linux/can/platform/sja1000.h>
 
 #include <media/soc_camera.h>
 
@@ -514,6 +515,33 @@ static struct mx3fb_platform_data mx3fb_pdata = {
 	.num_modes	= ARRAY_SIZE(fb_modedb),
 };
 
+static struct resource pcm970_sja1000_resources[] = {
+	{
+		.start   = CS5_BASE_ADDR,
+		.end     = CS5_BASE_ADDR + 0x100 - 1,
+		.flags   = IORESOURCE_MEM,
+	}, {
+		.start   = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+		.end     = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+	.clock		= 16000000 / 2,
+	.ocr		= 0x40 | 0x18,
+	.cdr		= 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+	.name = "sja1000_platform",
+	.dev = {
+		.platform_data = &pcm970_sja1000_platform_data,
+	},
+	.resource = pcm970_sja1000_resources,
+	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
 /*
  * Board specific initialization.
  */
@@ -574,6 +602,8 @@ static void __init mxc_board_init(void)
 
 	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
 		mxc_register_device(&mx3_camera, &camera_pdata);
+
+	platform_device_register(&pcm970_sja1000);
 }
 
 static void __init pcm037_timer_init(void)
-- 
GitLab


From 61b032ef263c17bb733cfb3f87a811be52adbe22 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 13:21:42 +0200
Subject: [PATCH 140/257] pcm038: Add support for SJA1000 on baseboard

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/pcm970-baseboard.c | 29 ++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 8e2bc94f1a0..c261f59b0b4 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/can/platform/sja1000.h>
 
 #include <asm/mach/arch.h>
 
@@ -188,6 +189,33 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 	.dmacr		= 0x00020010,
 };
 
+static struct resource pcm970_sja1000_resources[] = {
+	{
+		.start   = CS4_BASE_ADDR,
+		.end     = CS4_BASE_ADDR + 0x100 - 1,
+		.flags   = IORESOURCE_MEM,
+	}, {
+		.start   = IRQ_GPIOE(19),
+		.end     = IRQ_GPIOE(19),
+		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+	.clock		= 16000000 / 2,
+	.ocr		= 0x40 | 0x18,
+	.cdr		= 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+	.name = "sja1000_platform",
+	.dev = {
+		.platform_data = &pcm970_sja1000_platform_data,
+	},
+	.resource = pcm970_sja1000_resources,
+	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
 /*
  * system init for baseboard usage. Will be called by pcm038 init.
  *
@@ -201,4 +229,5 @@ void __init pcm970_baseboard_init(void)
 
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+	platform_device_register(&pcm970_sja1000);
 }
-- 
GitLab


From 8afaada2dc9247ffcd2982be824cd290ace18f55 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 15 Jun 2009 12:36:25 +0200
Subject: [PATCH 141/257] mxc gpio: CONFIG_ARCH_* -> cpu_is_*()

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/gpio.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 7506d963be4..b7071572035 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -162,7 +162,6 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 	}
 }
 
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
 /* MX1 and MX3 has one interrupt *per* gpio port */
 static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
@@ -174,9 +173,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 
 	mxc_gpio_irq_handler(port, irq_stat);
 }
-#endif
 
-#ifdef CONFIG_ARCH_MX2
 /* MX2 has one interrupt *for all* gpio ports */
 static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
@@ -195,7 +192,6 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 			mxc_gpio_irq_handler(&port[i], irq_stat);
 	}
 }
-#endif
 
 static struct irq_chip gpio_irq_chip = {
 	.ack = gpio_ack_irq,
@@ -284,17 +280,18 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
-		/* setup one handler for each entry */
-		set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
-		set_irq_data(port[i].irq, &port[i]);
-#endif
+		if (cpu_is_mx1() || cpu_is_mx3()) {
+			/* setup one handler for each entry */
+			set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
+			set_irq_data(port[i].irq, &port[i]);
+		}
+	}
+
+	if (cpu_is_mx2()) {
+		/* setup one handler for all GPIO interrupts */
+		set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
+		set_irq_data(port[0].irq, port);
 	}
 
-#ifdef CONFIG_ARCH_MX2
-	/* setup one handler for all GPIO interrupts */
-	set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
-	set_irq_data(port[0].irq, port);
-#endif
 	return 0;
 }
-- 
GitLab


From 494f22dddc6308b9c35984118ff4cb1681ad8e48 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 27 May 2009 18:26:51 +0200
Subject: [PATCH 142/257] MXC gpio interrupt support: move register definitions
 to .c file

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/gpio.c              | 17 +++++++++++++++++
 arch/arm/plat-mxc/include/mach/mx1.h  | 14 --------------
 arch/arm/plat-mxc/include/mach/mx2x.h | 14 --------------
 arch/arm/plat-mxc/include/mach/mx3x.h | 14 --------------
 4 files changed, 17 insertions(+), 42 deletions(-)

diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index b7071572035..f0315edb3eb 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -29,6 +29,23 @@
 static struct mxc_gpio_port *mxc_gpio_ports;
 static int gpio_table_size;
 
+#define cpu_is_mx1_mx2()	(cpu_is_mx1() || cpu_is_mx2())
+
+#define GPIO_DR		(cpu_is_mx1_mx2() ? 0x1c : 0x00)
+#define GPIO_GDIR	(cpu_is_mx1_mx2() ? 0x00 : 0x04)
+#define GPIO_PSR	(cpu_is_mx1_mx2() ? 0x24 : 0x08)
+#define GPIO_ICR1	(cpu_is_mx1_mx2() ? 0x28 : 0x0C)
+#define GPIO_ICR2	(cpu_is_mx1_mx2() ? 0x2C : 0x10)
+#define GPIO_IMR	(cpu_is_mx1_mx2() ? 0x30 : 0x14)
+#define GPIO_ISR	(cpu_is_mx1_mx2() ? 0x34 : 0x18)
+#define GPIO_ISR	(cpu_is_mx1_mx2() ? 0x34 : 0x18)
+
+#define GPIO_INT_LOW_LEV	(cpu_is_mx1_mx2() ? 0x3 : 0x0)
+#define GPIO_INT_HIGH_LEV	(cpu_is_mx1_mx2() ? 0x2 : 0x1)
+#define GPIO_INT_RISE_EDGE	(cpu_is_mx1_mx2() ? 0x0 : 0x2)
+#define GPIO_INT_FALL_EDGE	(cpu_is_mx1_mx2() ? 0x1 : 0x3)
+#define GPIO_INT_NONE		0x4
+
 /* Note: This driver assumes 32 GPIOs are handled in one register */
 
 static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index ee60d64728c..1b2890a5c45 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -134,20 +134,6 @@
 #define GPIO_INT_PORTD		62
 #define WDT_INT			63
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x1C
-#define GPIO_GDIR	 	0x00
-#define GPIO_PSR	 	0x24
-#define GPIO_ICR1	 	0x28
-#define GPIO_ICR2	 	0x2C
-#define GPIO_IMR	 	0x30
-#define GPIO_ISR	 	0x34
-#define GPIO_INT_LOW_LEV	0x3
-#define GPIO_INT_HIGH_LEV	0x2
-#define GPIO_INT_RISE_EDGE 	0x0
-#define GPIO_INT_FALL_EDGE	0x1
-#define GPIO_INT_NONE		0x4
-
 /* DMA */
 #define DMA_REQ_UART3_T		2
 #define DMA_REQ_UART3_R		3
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index 5982ae5a00d..db5d921e0fe 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -150,20 +150,6 @@
 #define MXC_INT_GPIO		8
 #define MXC_INT_CSPI3		6
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x1C
-#define GPIO_GDIR	 	0x00
-#define GPIO_PSR	 	0x24
-#define GPIO_ICR1	 	0x28
-#define GPIO_ICR2	 	0x2C
-#define GPIO_IMR	 	0x30
-#define GPIO_ISR	 	0x34
-#define GPIO_INT_LOW_LEV	0x3
-#define GPIO_INT_HIGH_LEV	0x2
-#define GPIO_INT_RISE_EDGE 	0x0
-#define GPIO_INT_FALL_EDGE	0x1
-#define GPIO_INT_NONE		0x4
-
 /* fixed DMA request numbers */
 #define DMA_REQ_CSI_RX          31
 #define DMA_REQ_CSI_STAT        30
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 16f68e8f4cf..009f4440276 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -259,20 +259,6 @@
 #define SYSTEM_REV_MIN		CHIP_REV_1_0
 #define SYSTEM_REV_NUM		3
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x00
-#define GPIO_GDIR	 	0x04
-#define GPIO_PSR	 	0x08
-#define GPIO_ICR1	 	0x0C
-#define GPIO_ICR2	 	0x10
-#define GPIO_IMR	 	0x14
-#define GPIO_ISR	 	0x18
-#define GPIO_INT_LOW_LEV	0x0
-#define GPIO_INT_HIGH_LEV	0x1
-#define GPIO_INT_RISE_EDGE	0x2
-#define GPIO_INT_FALL_EDGE	0x3
-#define GPIO_INT_NONE		0x4
-
 /* Mandatory defines used globally */
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-- 
GitLab


From 5ef881bbecc72862fa379cb286a50f2781db4cec Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Jun 2009 11:35:08 +0200
Subject: [PATCH 143/257] MXC: pwm driver fixes

- fix off-by-one error in divider calculation
- disable pwm in pwm_disable

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/pwm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index ae34198a79d..42dd17b89ff 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -72,7 +72,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 
 		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
 		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
-		writel(MX3_PWMCR_PRESCALER(prescale - 1) |
+		writel(MX3_PWMCR_PRESCALER(prescale) |
 			MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
 			pwm->mmio_base + MX3_PWMCR);
 	} else if (cpu_is_mx1() || cpu_is_mx21()) {
@@ -118,6 +118,8 @@ EXPORT_SYMBOL(pwm_enable);
 
 void pwm_disable(struct pwm_device *pwm)
 {
+	writel(0, pwm->mmio_base + MX3_PWMCR);
+
 	if (pwm->clk_enabled) {
 		clk_disable(pwm->clk);
 		pwm->clk_enabled = 0;
-- 
GitLab


From 6d73665f052a8dadf6f33dfd2546e15199ad7c5f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 3 Jun 2009 11:22:32 +0200
Subject: [PATCH 144/257] MXC PLL decoding: calculate mfn value with less magic

Also, use cpu_is_* macros rather than CONFIG_ARCH_*

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/clock.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 92e13566cd4..f653213b741 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -39,6 +39,7 @@
 #include <linux/string.h>
 
 #include <mach/clock.h>
+#include <mach/hardware.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
@@ -363,12 +364,11 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
 
 	mfn_abs = mfn;
 
-#if !defined CONFIG_ARCH_MX1 && !defined CONFIG_ARCH_MX21
-	if (mfn >= 0x200) {
-		mfn |= 0xFFFFFE00;
-		mfn_abs = -mfn;
-	}
-#endif
+	/* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
+	 * 2's complements number
+	 */
+	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+		mfn_abs = 0x400 - mfn;
 
 	freq *= 2;
 	freq /= pd + 1;
@@ -376,8 +376,10 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
 	ll = (unsigned long long)freq * mfn_abs;
 
 	do_div(ll, mfd + 1);
-	if (mfn < 0)
+
+	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
 		ll = -ll;
+
 	ll = (freq * mfi) + ll;
 
 	return ll;
-- 
GitLab


From 7dae1134cd4117c1a579f8ae58ce13c1c1ff7164 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Sat, 7 Feb 2009 13:34:01 +0100
Subject: [PATCH 145/257] [ARM] MXC: Switch MX1 to clkdev support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/clock.c | 84 +++++++++++++--------------------------
 arch/arm/plat-mxc/Kconfig |  1 +
 2 files changed, 29 insertions(+), 56 deletions(-)

diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 7b739dd8700..d1b588519ad 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -18,11 +18,14 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/list.h>
 #include <linux/math64.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
+#include <asm/clkdev.h>
+
 #include <mach/clock.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
@@ -94,7 +97,6 @@ static unsigned long clk16m_get_rate(struct clk *clk)
 }
 
 static struct clk clk16m = {
-	.name = "CLK16M",
 	.get_rate = clk16m_get_rate,
 	.enable = _clk_enable,
 	.enable_reg = CCM_CSCR,
@@ -111,7 +113,6 @@ static unsigned long clk32_get_rate(struct clk *clk)
 }
 
 static struct clk clk32 = {
-	.name = "CLK32",
 	.get_rate = clk32_get_rate,
 };
 
@@ -121,7 +122,6 @@ static unsigned long clk32_premult_get_rate(struct clk *clk)
 }
 
 static struct clk clk32_premult = {
-	.name = "CLK32_premultiplier",
 	.parent = &clk32,
 	.get_rate = clk32_premult_get_rate,
 };
@@ -156,7 +156,6 @@ static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
 }
 
 static struct clk prem_clk = {
-	.name = "prem_clk",
 	.set_parent = prem_clk_set_parent,
 };
 
@@ -167,7 +166,6 @@ static unsigned long system_clk_get_rate(struct clk *clk)
 }
 
 static struct clk system_clk = {
-	.name = "system_clk",
 	.parent = &prem_clk,
 	.get_rate = system_clk_get_rate,
 };
@@ -179,7 +177,6 @@ static unsigned long mcu_clk_get_rate(struct clk *clk)
 }
 
 static struct clk mcu_clk = {
-	.name = "mcu_clk",
 	.parent = &clk32_premult,
 	.get_rate = mcu_clk_get_rate,
 };
@@ -195,7 +192,6 @@ static unsigned long fclk_get_rate(struct clk *clk)
 }
 
 static struct clk fclk = {
-	.name = "fclk",
 	.parent = &mcu_clk,
 	.get_rate = fclk_get_rate,
 };
@@ -238,7 +234,6 @@ static int hclk_set_rate(struct clk *clk, unsigned long rate)
 }
 
 static struct clk hclk = {
-	.name = "hclk",
 	.parent = &system_clk,
 	.get_rate = hclk_get_rate,
 	.round_rate = hclk_round_rate,
@@ -280,7 +275,6 @@ static int clk48m_set_rate(struct clk *clk, unsigned long rate)
 }
 
 static struct clk clk48m = {
-	.name = "CLK48M",
 	.parent = &system_clk,
 	.get_rate = clk48m_get_rate,
 	.round_rate = clk48m_round_rate,
@@ -400,21 +394,18 @@ static int perclk3_set_rate(struct clk *clk, unsigned long rate)
 
 static struct clk perclk[] = {
 	{
-		.name = "perclk",
 		.id = 0,
 		.parent = &system_clk,
 		.get_rate = perclk1_get_rate,
 		.round_rate = perclk1_round_rate,
 		.set_rate = perclk1_set_rate,
 	}, {
-		.name = "perclk",
 		.id = 1,
 		.parent = &system_clk,
 		.get_rate = perclk2_get_rate,
 		.round_rate = perclk2_round_rate,
 		.set_rate = perclk2_set_rate,
 	}, {
-		.name = "perclk",
 		.id = 2,
 		.parent = &system_clk,
 		.get_rate = perclk3_get_rate,
@@ -457,12 +448,10 @@ static int clko_set_parent(struct clk *clk, struct clk *parent)
 }
 
 static struct clk clko_clk = {
-	.name = "clko_clk",
 	.set_parent = clko_set_parent,
 };
 
 static struct clk dma_clk = {
-	.name = "dma",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -473,7 +462,6 @@ static struct clk dma_clk = {
 };
 
 static struct clk csi_clk = {
-	.name = "csi_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -484,7 +472,6 @@ static struct clk csi_clk = {
 };
 
 static struct clk mma_clk = {
-	.name = "mma_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -495,7 +482,6 @@ static struct clk mma_clk = {
 };
 
 static struct clk usbd_clk = {
-	.name = "usbd_clk",
 	.parent = &clk48m,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -506,99 +492,85 @@ static struct clk usbd_clk = {
 };
 
 static struct clk gpt_clk = {
-	.name = "gpt_clk",
 	.parent = &perclk[0],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk uart_clk = {
-	.name = "uart",
 	.parent = &perclk[0],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk i2c_clk = {
-	.name = "i2c_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk spi_clk = {
-	.name = "spi_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk sdhc_clk = {
-	.name = "sdhc_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk lcdc_clk = {
-	.name = "lcdc_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk mshc_clk = {
-	.name = "mshc_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk ssi_clk = {
-	.name = "ssi_clk",
 	.parent = &perclk[2],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk rtc_clk = {
-	.name = "rtc_clk",
 	.parent = &clk32,
 };
 
-static struct clk *mxc_clks[] = {
-	&clk16m,
-	&clk32,
-	&clk32_premult,
-	&prem_clk,
-	&system_clk,
-	&mcu_clk,
-	&fclk,
-	&hclk,
-	&clk48m,
-	&perclk[0],
-	&perclk[1],
-	&perclk[2],
-	&clko_clk,
-	&dma_clk,
-	&csi_clk,
-	&mma_clk,
-	&usbd_clk,
-	&gpt_clk,
-	&uart_clk,
-	&i2c_clk,
-	&spi_clk,
-	&sdhc_clk,
-	&lcdc_clk,
-	&mshc_clk,
-	&ssi_clk,
-	&rtc_clk,
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+static struct clk_lookup lookups[] __initdata = {
+	_REGISTER_CLOCK(NULL, "dma", dma_clk)
+	_REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK(NULL, "mma", mma_clk)
+	_REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, spi_clk)
+	_REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi_clk)
+	_REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
 };
 
 int __init mx1_clocks_init(unsigned long fref)
 {
-	struct clk **clkp;
 	unsigned int reg;
+	int i;
 
 	/* disable clocks we are able to */
 	__raw_writel(0, SCM_GCCR);
@@ -620,8 +592,8 @@ int __init mx1_clocks_init(unsigned long fref)
 	reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
 	clko_clk.parent = (struct clk *)clko_clocks[reg];
 
-	for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
-		clk_register(*clkp);
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
 
 	clk_enable(&hclk);
 	clk_enable(&fclk);
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 8986b741223..0617c19f85c 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -9,6 +9,7 @@ choice
 config ARCH_MX1
 	bool "MX1-based"
 	select CPU_ARM920T
+	select COMMON_CLKDEV
 	help
 	  This enables support for systems based on the Freescale i.MX1 family
 
-- 
GitLab


From 5e63ff9a973a19b78bb0eef22df8946b36e09f0f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Sat, 7 Feb 2009 13:37:29 +0100
Subject: [PATCH 146/257] [ARM] MXC: remove the now unused #ifndef
 CONFIG_COMMON_CLKDEV

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/clock.c | 154 --------------------------------------
 1 file changed, 154 deletions(-)

diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index f653213b741..9e8fbd57495 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -48,76 +48,6 @@ static DEFINE_MUTEX(clocks_mutex);
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
-/*
- * All the code inside #ifndef CONFIG_COMMON_CLKDEV can be removed once all
- * MXC architectures have switched to using clkdev.
- */
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Retrieve a clock by name.
- *
- * Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use "<name>.<id>". If this fails,
- * we try to use clock name only.
- * The reference count to the clock's module owner ref count is incremented.
- */
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-	int idno;
-	const char *str;
-
-	if (id == NULL)
-		return clk;
-
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
-	else
-		idno = to_platform_device(dev)->id;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(p, &clocks, node) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-	str = strrchr(id, '.');
-	if (str) {
-		int cnt = str - id;
-		str++;
-		idno = simple_strtol(str, NULL, 10);
-		list_for_each_entry(p, &clocks, node) {
-			if (p->id == idno &&
-			    strlen(p->name) == cnt &&
-			    strncmp(id, p->name, cnt) == 0 &&
-			    try_module_get(p->owner)) {
-				clk = p;
-				goto found;
-			}
-		}
-	}
-
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-	printk(KERN_WARNING "clk: Unable to get requested clock: %s\n", id);
-
-found:
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-#endif
-
 static void __clk_disable(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
@@ -194,16 +124,6 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-#ifndef CONFIG_COMMON_CLKDEV
-/* Decrement the clock's module reference count */
-void clk_put(struct clk *clk)
-{
-	if (clk && !IS_ERR(clk))
-		module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-#endif
-
 /* Round the requested clock rate to the nearest supported
  * rate that is less than or equal to the requested rate.
  * This is dependent on the clock's current parent.
@@ -266,80 +186,6 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Add a new clock to the clock tree.
- */
-int clk_register(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-/* Remove a clock from the clock tree */
-void clk_unregister(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-#ifdef CONFIG_PROC_FS
-static int mxc_clock_read_proc(char *page, char **start, off_t off,
-				int count, int *eof, void *data)
-{
-	struct clk *clkp;
-	char *p = page;
-	int len;
-
-	list_for_each_entry(clkp, &clocks, node) {
-		p += sprintf(p, "%s-%d:\t\t%lu, %d", clkp->name, clkp->id,
-				clk_get_rate(clkp), clkp->usecount);
-		if (clkp->parent)
-			p += sprintf(p, ", %s-%d\n", clkp->parent->name,
-				     clkp->parent->id);
-		else
-			p += sprintf(p, "\n");
-	}
-
-	len = (p - page) - off;
-	if (len < 0)
-		len = 0;
-
-	*eof = (len <= count) ? 1 : 0;
-	*start = page + off;
-
-	return len;
-}
-
-static int __init mxc_setup_proc_entry(void)
-{
-	struct proc_dir_entry *res;
-
-	res = create_proc_read_entry("cpu/clocks", 0, NULL,
-				     mxc_clock_read_proc, NULL);
-	if (!res) {
-		printk(KERN_ERR "Failed to create proc/cpu/clocks\n");
-		return -ENOMEM;
-	}
-	return 0;
-}
-
-late_initcall(mxc_setup_proc_entry);
-#endif /* CONFIG_PROC_FS */
-#endif
-
 /*
  * Get the resulting clock rate from a PLL register value and the input
  * frequency. PLLs with this register layout can at least be found on
-- 
GitLab


From c13a482c43a148c2b8060b405fc39a4b214d56d2 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 25 Jun 2009 14:11:50 +0200
Subject: [PATCH 147/257] MX3: Add USB platform devices and resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c | 65 +++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx3/devices.h |  3 ++
 2 files changed, 68 insertions(+)

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 7a5c2ef52a4..4e728a29196 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -390,6 +390,71 @@ struct platform_device mxc_otg_udc_device = {
 	.num_resources	= ARRAY_SIZE(otg_resources),
 };
 
+/* OTG host */
+struct platform_device mxc_otg_host = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = otg_resources,
+	.num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = ~(u32)0;
+
+static struct resource mxc_usbh1_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x200,
+		.end = OTG_BASE_ADDR + 0x3ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB1,
+		.end = MXC_INT_USB1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh1 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh1_dmamask,
+	},
+	.resource = mxc_usbh1_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = ~(u32)0;
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x400,
+		.end = OTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB2,
+		.end = MXC_INT_USB2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 2,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
 #ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
 	{
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index ffd494ddd4a..81614319755 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -16,5 +16,8 @@ extern struct platform_device mxc_fec_device;
 extern struct platform_device mxcsdhc_device0;
 extern struct platform_device mxcsdhc_device1;
 extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
 
-- 
GitLab


From 6558f985a1ff7ab2b413f49ee8766c919495e0ac Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 25 Jun 2009 14:11:51 +0200
Subject: [PATCH 148/257] ehci mxc: Fix clocks

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 25b6f55bfb0..2b29491c22b 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -532,6 +532,12 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
 	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
 	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
 	_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
-- 
GitLab


From 88e29a8d21fb9687ad6972a44571b295acaf0d74 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 25 Jun 2009 14:11:52 +0200
Subject: [PATCH 149/257] MX3: add additional USB pins to iomux

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 2eb182f7387..a3b206ce78b 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -635,6 +635,19 @@ enum iomux_pins {
 #define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM        IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_MISO__USBH1_RXDP        IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS0__USBH1_TXDM         IOMUX_MODE(MX31_PIN_CSPI1_SS0,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS1__USBH1_TXDP         IOMUX_MODE(MX31_PIN_CSPI1_SS1,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS2__USBH1_RCV          IOMUX_MODE(MX31_PIN_CSPI1_SS2,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SCLK__USBH1_OEB         IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS       IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_USBH2_DATA0__USBH2_DATA0      IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA1__USBH2_DATA1      IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_CLK__USBH2_CLK          IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DIR__USBH2_DIR          IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_NXT__USBH2_NXT          IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_STP__USBH2_STP          IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-- 
GitLab


From 627fb3b9d260cb413d0ea2d179e319a20e2bd82b Mon Sep 17 00:00:00 2001
From: javier Martin <javier.martin@vista-silicon.com>
Date: Wed, 15 Jul 2009 15:26:21 +0200
Subject: [PATCH 150/257] MX27: Add USB platform devices and resources

This adds clocks and resources for usb in i.mx27 SoC.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/clock_imx27.c |  9 +++-
 arch/arm/mach-mx2/devices.c     | 92 +++++++++++++++++++++++++++++++++
 arch/arm/mach-mx2/devices.h     |  4 ++
 3 files changed, 104 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index a0c577f80d4..4089951acb4 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -643,7 +643,14 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
-	_REGISTER_CLOCK(NULL, "usb", usb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
 	_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
 	_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index cbf42467466..4ecf0977beb 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -369,6 +369,98 @@ struct platform_device mxc_sdhc_device1 = {
        .resource       = mxc_sdhc2_resources,
 };
 
+static struct resource otg_resources[] = {
+	{
+		.start	= OTG_BASE_ADDR,
+		.end	= OTG_BASE_ADDR + 0x1ff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_USB3,
+		.end	= MXC_INT_USB3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 otg_dmamask = 0xffffffffUL;
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &otg_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+	},
+	.resource	= otg_resources,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+};
+
+/* OTG host */
+struct platform_device mxc_otg_host = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = otg_resources,
+	.num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh1_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x200,
+		.end = OTG_BASE_ADDR + 0x3ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB1,
+		.end = MXC_INT_USB1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh1 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh1_dmamask,
+	},
+	.resource = mxc_usbh1_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x400,
+		.end = OTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB2,
+		.end = MXC_INT_USB2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 2,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index c79ba7fed1b..6e91b4e3509 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -19,3 +19,7 @@ extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
-- 
GitLab


From af5b1df7136570dae9ac4c1cd193053c61b0ed8f Mon Sep 17 00:00:00 2001
From: Eric Benard <eric@eukrea.com>
Date: Thu, 16 Jul 2009 16:26:33 +0200
Subject: [PATCH 151/257] Add support for Eukrea's CPUIMX27

CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of
 NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR,
 it includes an ethernet PHY in MII mode, an I2C RTC and a
 ST16554 QuadUART on nCS3.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Kconfig                     |  14 ++
 arch/arm/mach-mx2/Makefile                    |   2 +-
 arch/arm/mach-mx2/eukrea_cpuimx27.c           | 235 ++++++++++++++++++
 .../include/mach/board-eukrea_cpuimx27.h      |  25 ++
 4 files changed, 275 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-mx2/eukrea_cpuimx27.c
 create mode 100644 arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index c77da586b71..2c2be3953d8 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -53,6 +53,20 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
+config MACH_EUKREA_CPUIMX27
+	bool "Eukrea CPUIMX27 module"
+	depends on MACH_MX27
+	help
+	  Include support for Eukrea CPUIMX27 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+config MACH_EUKREA_CPUIMX27_USESDHC2
+	bool "CPUIMX27 integrates SDHC2 module"
+	depends on MACH_EUKREA_CPUIMX27
+	help
+	  This adds support for the internal SDHC2 used on CPUIMX27 used
+	  for wifi or eMMC.
+
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
 	depends on MACH_MX27
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index b9b1cca4e9b..e12490f670d 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -17,4 +17,4 @@ obj-$(CONFIG_MACH_PCM038) += pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
-
+obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
new file mode 100644
index 00000000000..a2c4181892c
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c
@@ -0,0 +1,235 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux.h>
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SDHC2 */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	/* Quad UART's IRQ */
+	GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+	.width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+	.start = 0xc0000000,
+	.end   = 0xc3ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &eukrea_cpuimx27_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_cpuimx27_nor_mtd_device,
+	&mxc_fec_device,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	},
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+		.irq = IRQ_GPIOB(23),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+		.irq = IRQ_GPIOB(22),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+		.irq = IRQ_GPIOB(27),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+		.irq = IRQ_GPIOB(30),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+#endif
+
+static void __init eukrea_cpuimx27_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+
+	mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+
+	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+	/* SDHC2 can be used for Wifi */
+	mxc_register_device(&mxc_sdhc_device1, NULL);
+	/* in which case UART4 is also used for Bluetooth */
+	mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	platform_device_register(&serial_device);
+#endif
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+	eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+	.init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = eukrea_cpuimx27_init,
+	.timer          = &eukrea_cpuimx27_timer,
+MACHINE_END
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
new file mode 100644
index 00000000000..91bcce65469
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on board-pcm038.h which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+
+#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */
-- 
GitLab


From a961bf380b93741c2191f8efc8f5f1c65224b216 Mon Sep 17 00:00:00 2001
From: Eric Benard <eric@eukrea.com>
Date: Thu, 16 Jul 2009 16:26:34 +0200
Subject: [PATCH 152/257] Add support for Eukrea's MBIMX27

MBIMX27 is the evaluation board for CPUIMX27 and integrates : a
QVGA TFT, a SPI touchscreen controler, a SDCard connector wired to
SDHC1.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Kconfig                     |  14 +
 arch/arm/mach-mx2/Makefile                    |   1 +
 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c  | 249 ++++++++++++++++++
 .../include/mach/board-eukrea_cpuimx27.h      |  15 ++
 4 files changed, 279 insertions(+)
 create mode 100644 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 2c2be3953d8..0c28a37bc14 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -67,6 +67,20 @@ config MACH_EUKREA_CPUIMX27_USESDHC2
 	  This adds support for the internal SDHC2 used on CPUIMX27 used
 	  for wifi or eMMC.
 
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX27
+	default MACH_EUKREA_MBIMX27_BASEBOARD
+
+config MACH_EUKREA_MBIMX27_BASEBOARD
+	prompt "Eukrea MBIMX27 development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX27 evaluation board.
+
+endchoice
+
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
 	depends on MACH_MX27
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index e12490f670d..8b6846c4226 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
new file mode 100644
index 00000000000..7382b6d27ee
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static int eukrea_mbimx27_pins[] = {
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* SPI1 */
+	PD28_PF_CSPI1_SS0,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 16,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "none",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 19,
+	},
+	{
+		.name			= "backlight",
+		.default_trigger	= "backlight",
+		.active_low		= 0,
+		.gpio			= GPIO_PORTE | 5,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
+	{
+		.mode = {
+			.name		= "CMO-QGVA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= 156000,
+			.hsync_len	= 30,
+			.left_margin	= 38,
+			.right_margin	= 20,
+			.vsync_len	= 3,
+			.upper_margin	= 15,
+			.lower_margin	= 4,
+		},
+		.pcr		= 0xFAD08B80,
+		.bpp		= 16,
+	},
+};
+
+static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+	.mode = eukrea_mbimx27_modes,
+	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#define ADS7846_PENDOWN (GPIO_PORTD | 25)
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+
+	gpio_direction_input(ADS7846_PENDOWN);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ADS7846_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "ads7846",
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 1500000,
+		.irq		= IRQ_GPIOD(25),
+		.platform_data	= &ads7846_config,
+		.mode           = SPI_MODE_2,
+	},
+};
+
+static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
+
+static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
+	.chipselect	= eukrea_mbimx27_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
+};
+#endif
+
+static struct platform_device *platform_devices[] __initdata = {
+	&leds_gpio,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx27 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimx27_baseboard_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
+		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
+
+	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, NULL);
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	/* SPI and ADS7846 Touchscreen controler init */
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
+	spi_register_board_info(eukrea_mbimx27_spi_board_info,
+			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
+	ads7846_dev_init();
+#endif
+
+	/* Leds configuration */
+	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
+	/* Backlight */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
index 91bcce65469..a1fd5830af4 100644
--- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
@@ -22,4 +22,19 @@
 #ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
 #define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
 
+#ifndef __ASSEMBLY__
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own baseboard init function and call it from
+ * inside eukrea_cpuimx27_init().
+ *
+ * This example here is for the development board. Refer
+ * eukrea_mbimx27-baseboard.c
+ */
+
+extern void eukrea_mbimx27_baseboard_init(void);
+
+#endif
+
 #endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */
-- 
GitLab


From 8f2208601f81b505710b0d13dbd80b687ccbca60 Mon Sep 17 00:00:00 2001
From: Simon Guinot <sguinot@lacie.com>
Date: Mon, 22 Jun 2009 21:45:01 +0200
Subject: [PATCH 153/257] [ARM] orion5x: Add LaCie NAS d2Network support

This patch add support for the d2 Network and the Big Disk Network
LaCie boards.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Acked-by: Christopher Moore <moore@free.fr>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/Kconfig       |  14 ++
 arch/arm/mach-orion5x/Makefile      |   2 +
 arch/arm/mach-orion5x/d2net-setup.c | 365 ++++++++++++++++++++++++++++
 3 files changed, 381 insertions(+)
 create mode 100644 arch/arm/mach-orion5x/d2net-setup.c

diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 2c7035d8dcb..5062b05b76b 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -89,6 +89,20 @@ config MACH_EDMINI_V2
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Ethernet Disk mini V2.
 
+config MACH_D2NET
+	bool "LaCie d2 Network"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie d2 Network NAS.
+
+config MACH_BIGDISK
+	bool "LaCie Big Disk Network"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Big Disk Network NAS.
+
 config MACH_MSS2
 	bool "Maxtor Shared Storage II"
 	help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index edc38e2c856..1db8a3a2708 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -12,6 +12,8 @@ obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
 obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
 obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
 obj-$(CONFIG_MACH_EDMINI_V2)	+= edmini_v2-setup.o
+obj-$(CONFIG_MACH_D2NET)	+= d2net-setup.o
+obj-$(CONFIG_MACH_BIGDISK)	+= d2net-setup.o
 obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
 obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
new file mode 100644
index 00000000000..9d4bf763f25
--- /dev/null
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -0,0 +1,365 @@
+/*
+ * arch/arm/mach-orion5x/d2net-setup.c
+ *
+ * LaCie d2Network and Big Disk Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * LaCie d2 Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define D2NET_NOR_BOOT_BASE		0xfff80000
+#define D2NET_NOR_BOOT_SIZE		SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition d2net_partitions[] = {
+	{
+		.name		= "Full512kb",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data d2net_nor_flash_data = {
+	.width		= 1,
+	.parts		= d2net_partitions,
+	.nr_parts	= ARRAY_SIZE(d2net_partitions),
+};
+
+static struct resource d2net_nor_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+	.start			= D2NET_NOR_BOOT_BASE,
+	.end			= D2NET_NOR_BOOT_BASE
+					+ D2NET_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device d2net_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &d2net_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &d2net_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data d2net_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip         | description
+ * 0x32     | Ricoh 5C372b | RTC
+ * 0x3e     | GMT G762     | PWM fan controller
+ * 0x50     | HT24LC08     | eeprom (1kB)
+ *
+ * TODO: Add G762 support to the g760a driver.
+ */
+static struct i2c_board_info __initdata d2net_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	}, {
+		I2C_BOARD_INFO("24c08", 0x50),
+	},
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data d2net_sata_data = {
+	.n_ports	= 2,
+};
+
+#define D2NET_GPIO_SATA0_POWER	3
+#define D2NET_GPIO_SATA1_POWER	12
+
+static void __init d2net_sata_power_init(void)
+{
+	int err;
+
+	err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power");
+	if (err == 0) {
+		err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1);
+		if (err)
+			gpio_free(D2NET_GPIO_SATA0_POWER);
+	}
+	if (err)
+		pr_err("d2net: failed to configure SATA0 power GPIO\n");
+
+	err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power");
+	if (err == 0) {
+		err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1);
+		if (err)
+			gpio_free(D2NET_GPIO_SATA1_POWER);
+	}
+	if (err)
+		pr_err("d2net: failed to configure SATA1 power GPIO\n");
+}
+
+/*****************************************************************************
+ * GPIO LED's
+ ****************************************************************************/
+
+/*
+ * The blue front LED is wired to the CPLD and can blink in relation with the
+ * SATA activity. This feature is disabled to make this LED compatible with
+ * the leds-gpio driver: MPP14 and MPP15 are configured to act like output
+ * GPIO's and have to stay in an active state. This is needed to set the blue
+ * LED in a "fix on" state regardless of the SATA activity.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ * led_off   | blink_ctrl | SATA active | LED state
+ *           |            |             |
+ *    1      |     x      |      x      |  off
+ *    0      |     0      |      0      |  off
+ *    0      |     1      |      0      |  blink (rate 300ms)
+ *    0      |     x      |      1      |  on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ *        Red LED have priority.
+ */
+
+#define D2NET_GPIO_RED_LED		6
+#define D2NET_GPIO_BLUE_LED_BLINK_CTRL	16
+#define D2NET_GPIO_BLUE_LED_OFF		23
+#define D2NET_GPIO_SATA0_ACT		14
+#define D2NET_GPIO_SATA1_ACT		15
+
+static struct gpio_led d2net_leds[] = {
+	{
+		.name = "d2net:blue:power",
+		.gpio = D2NET_GPIO_BLUE_LED_OFF,
+		.active_low = 1,
+	},
+	{
+		.name = "d2net:red:fail",
+		.gpio = D2NET_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data d2net_led_data = {
+	.num_leds = ARRAY_SIZE(d2net_leds),
+	.leds = d2net_leds,
+};
+
+static struct platform_device d2net_gpio_leds = {
+	.name           = "leds-gpio",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &d2net_led_data,
+	},
+};
+
+static void __init d2net_gpio_leds_init(void)
+{
+	/* Configure GPIO over MPP max number. */
+	orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
+
+	if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0)
+		return;
+	if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0)
+		goto err_free_1;
+	if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0)
+		goto err_free_1;
+	if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0)
+		goto err_free_2;
+	platform_device_register(&d2net_gpio_leds);
+	return;
+
+err_free_2:
+	gpio_free(D2NET_GPIO_SATA1_ACT);
+err_free_1:
+	gpio_free(D2NET_GPIO_SATA0_ACT);
+	return;
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define D2NET_GPIO_PUSH_BUTTON		18
+#define D2NET_GPIO_POWER_SWITCH_ON	8
+#define D2NET_GPIO_POWER_SWITCH_OFF	9
+
+#define D2NET_SWITCH_POWER_ON		0x1
+#define D2NET_SWITCH_POWER_OFF		0x2
+
+static struct gpio_keys_button d2net_buttons[] = {
+	{
+		.type		= EV_SW,
+		.code		= D2NET_SWITCH_POWER_OFF,
+		.gpio		= D2NET_GPIO_POWER_SWITCH_OFF,
+		.desc		= "Power rocker switch (auto|off)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_SW,
+		.code		= D2NET_SWITCH_POWER_ON,
+		.gpio		= D2NET_GPIO_POWER_SWITCH_ON,
+		.desc		= "Power rocker switch (on|auto)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_KEY,
+		.code		= KEY_POWER,
+		.gpio		= D2NET_GPIO_PUSH_BUTTON,
+		.desc		= "Front Push Button",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data d2net_button_data = {
+	.buttons	= d2net_buttons,
+	.nbuttons	= ARRAY_SIZE(d2net_buttons),
+};
+
+static struct platform_device d2net_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_button_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },	/* Board ID (bit 0) */
+	{  1, MPP_GPIO },	/* Board ID (bit 1) */
+	{  2, MPP_GPIO },	/* Board ID (bit 2) */
+	{  3, MPP_GPIO },	/* SATA 0 power */
+	{  4, MPP_UNUSED },
+	{  5, MPP_GPIO },	/* Fan fail detection */
+	{  6, MPP_GPIO },	/* Red front LED */
+	{  7, MPP_UNUSED },
+	{  8, MPP_GPIO },	/* Rear power switch (on|auto) */
+	{  9, MPP_GPIO },	/* Rear power switch (auto|off) */
+	{ 10, MPP_UNUSED },
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_GPIO },	/* SATA 1 power */
+	{ 13, MPP_UNUSED },
+	{ 14, MPP_GPIO },	/* SATA 0 active */
+	{ 15, MPP_GPIO },	/* SATA 1 active */
+	{ 16, MPP_GPIO },	/* Blue front LED blink control */
+	{ 17, MPP_UNUSED },
+	{ 18, MPP_GPIO },	/* Front button (0 = Released, 1 = Pushed ) */
+	{ 19, MPP_UNUSED },
+	{ -1 }
+	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+	/* 23: Blue front LED off */
+	/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
+};
+
+static void __init d2net_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(d2net_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&d2net_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+
+	d2net_sata_power_init();
+	orion5x_sata_init(&d2net_sata_data);
+
+	orion5x_setup_dev_boot_win(D2NET_NOR_BOOT_BASE,
+				D2NET_NOR_BOOT_SIZE);
+	platform_device_register(&d2net_nor_flash);
+
+	platform_device_register(&d2net_gpio_buttons);
+
+	d2net_gpio_leds_init();
+
+	pr_notice("d2net: Flash write are not yet supported.\n");
+
+	i2c_register_board_info(0, d2net_i2c_devices,
+				ARRAY_SIZE(d2net_i2c_devices));
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+
+#ifdef CONFIG_MACH_D2NET
+MACHINE_START(D2NET, "LaCie d2 Network")
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= d2net_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_BIGDISK
+MACHINE_START(BIGDISK, "LaCie Big Disk Network")
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= d2net_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
+#endif
+
-- 
GitLab


From aec1bad326a99a8b0860fa9d518985ee388c9391 Mon Sep 17 00:00:00 2001
From: Siddarth Gore <gores@marvell.com>
Date: Tue, 9 Jun 2009 14:41:02 +0530
Subject: [PATCH 154/257] [ARM] Kirkwood: Add support for 6281-A1

Signed-off-by: Siddarth Gore <gores@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/common.c                | 5 ++++-
 arch/arm/mach-kirkwood/include/mach/kirkwood.h | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 0f691983801..0acb61f3c10 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -838,7 +838,8 @@ int __init kirkwood_find_tclk(void)
 	u32 dev, rev;
 
 	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6281_DEV_ID && rev == MV88F6281_REV_A0)
+	if (dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
+					rev == MV88F6281_REV_A1))
 		return 200000000;
 
 	return 166666667;
@@ -872,6 +873,8 @@ static char * __init kirkwood_id(void)
 			return "MV88F6281-Z0";
 		else if (rev == MV88F6281_REV_A0)
 			return "MV88F6281-A0";
+		else if (rev == MV88F6281_REV_A1)
+			return "MV88F6281-A1";
 		else
 			return "MV88F6281-Rev-Unsupported";
 	} else if (dev == MV88F6192_DEV_ID) {
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 07af858814a..54c132731d2 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -101,6 +101,7 @@
 #define MV88F6281_DEV_ID	0x6281
 #define MV88F6281_REV_Z0	0
 #define MV88F6281_REV_A0	2
+#define MV88F6281_REV_A1	3
 
 #define MV88F6192_DEV_ID	0x6192
 #define MV88F6192_REV_Z0	0
-- 
GitLab


From 7153c360ebe5bcfb1e6b7980b90584c75c8c8e4d Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 3 Aug 2009 16:25:12 +0200
Subject: [PATCH 155/257] =?UTF-8?q?=C2=B6ARM]=20Orion5x:=20fix=20cpu=20win?=
 =?UTF-8?q?dow=20mapping=20for=2088f6183?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

On the 88f6183, orion5x's setup_cpu_win() fails to ever program any
mbus bridge remap registers, which causes transactions for PCI/PCIe
IO/MEM space to get sent to random mbus targets.  Adding a check for
the 6183 in orion5x_cpu_win_can_remap() is necessary and sufficient
to make PCIe wlan cards work on the 6183 reference design.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/addr-map.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index d78731edebb..1a5d6a0e260 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -84,7 +84,8 @@ static int __init orion5x_cpu_win_can_remap(int win)
 	orion5x_pcie_id(&dev, &rev);
 	if ((dev == MV88F5281_DEV_ID && win < 4)
 	    || (dev == MV88F5182_DEV_ID && win < 2)
-	    || (dev == MV88F5181_DEV_ID && win < 2))
+	    || (dev == MV88F5181_DEV_ID && win < 2)
+	    || (dev == MV88F6183_DEV_ID && win < 4))
 		return 1;
 
 	return 0;
-- 
GitLab


From 7eeae54c68e91c46ec170e764d1cceac81f35969 Mon Sep 17 00:00:00 2001
From: Dhaval Vasa <dhaval.vasa@einfochips.com>
Date: Mon, 10 Aug 2009 17:37:34 +0530
Subject: [PATCH 156/257] [ARM] Kirkwood: Marvell OpenRD-Base board support

reference:
http://open-rd.org
http://code.google.com/p/openrd

This patch is tested for:
1. Boot from DRAM/NAND flash
2. NAND read/write/erase
3. GbE0
4. USB read/write

FIXME:
1. SD/UART1 selection
2. MPP configuration (currently, default)
3. PEX

Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/Kconfig             |  6 ++
 arch/arm/mach-kirkwood/Makefile            |  1 +
 arch/arm/mach-kirkwood/openrd_base-setup.c | 78 ++++++++++++++++++++++
 3 files changed, 85 insertions(+)
 create mode 100644 arch/arm/mach-kirkwood/openrd_base-setup.c

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 25100f7acf4..0aca451b216 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -38,6 +38,12 @@ config MACH_TS219
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-119 and TS-219 Turbo NAS devices.
 
+config MACH_OPENRD_BASE
+	bool "Marvell OpenRD Base Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell OpenRD Base Board.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 9dd680e964d..80ab0ec90ee 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -6,5 +6,6 @@ obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
+obj-$(CONFIG_MACH_OPENRD_BASE)		+= openrd_base-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
new file mode 100644
index 00000000000..3144bb87578
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-kirkwood/openrd_base-setup.c
+ *
+ * Marvell OpenRD Base Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_base_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mvsdio_platform_data openrd_base_mvsdio_data = {
+	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_base_mpp_config[] __initdata = {
+	MPP29_GPIO,
+	0
+};
+
+static void __init openrd_base_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(openrd_base_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
+
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&openrd_base_ge00_data);
+	kirkwood_sdio_init(&openrd_base_mvsdio_data);
+}
+
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_base_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
-- 
GitLab


From decf77079511fc5ef832ead074bb45e4e0b099c0 Mon Sep 17 00:00:00 2001
From: Ron Lee <ron@debian.org>
Date: Mon, 10 Aug 2009 18:23:48 +0530
Subject: [PATCH 157/257] [ARM] Kirkwood: Initialise SATA for OpenRD-Base

Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/openrd_base-setup.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
index 3144bb87578..947dfb8cd5b 100644
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -40,6 +41,10 @@ static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
+static struct mv_sata_platform_data openrd_base_sata_data = {
+	.n_ports	= 2,
+};
+
 static struct mvsdio_platform_data openrd_base_mvsdio_data = {
 	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
 };
@@ -63,6 +68,7 @@ static void __init openrd_base_init(void)
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&openrd_base_ge00_data);
+	kirkwood_sata_init(&openrd_base_sata_data);
 	kirkwood_sdio_init(&openrd_base_mvsdio_data);
 }
 
-- 
GitLab


From 54a246ff21b543bf3d8d5d064708dc7782403e32 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Tue, 11 Aug 2009 23:28:51 -0400
Subject: [PATCH 158/257] [ARM] add MAINTAINERS entry for Orion/Kirkwood/etc.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 MAINTAINERS | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index d6befb2c470..33d0ec494e3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -685,6 +685,18 @@ ARM/MAGICIAN MACHINE SUPPORT
 M:	Philipp Zabel <philipp.zabel@gmail.com>
 S:	Maintained
 
+ARM/Marvell Loki/Kirkwood/MV78xx0/Orion SOC support
+M:	Lennert Buytenhek <buytenh@marvell.com>
+M:	Nicolas Pitre <nico@marvell.com>
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+T:	git git://git.marvell.com/orion
+S:	Maintained
+F:	arch/arm/mach-loki/
+F:	arch/arm/mach-kirkwood/
+F:	arch/arm/mach-mv78xx0/
+F:	arch/arm/mach-orion5x/
+F:	arch/arm/plat-orion/
+
 ARM/MIOA701 MACHINE SUPPORT
 M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-- 
GitLab


From b88fb83b138d4a377abea9461b2d58b9bf8ad9fe Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:16 +0200
Subject: [PATCH 159/257] netx: Use get_irqnr_preamble to initialize base
 register
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch optimizes the irq handling a bit.  Now the base register is
only computed once per irq exception instead of at least twice.
Moreover the mov+add sequence is simplified to an ldr (which might save
some cycles depending on memory timing).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-netx/include/mach/entry-macro.S | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
index a1952a0feda..844f1f9acbd 100644
--- a/arch/arm/mach-netx/include/mach/entry-macro.S
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -24,15 +24,13 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =io_p2v(0x001ff000)
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
 		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\base, #io_p2v(0x00100000)
-		add	\base, \base, #0x000ff000
-
 		ldr	\irqstat, [\base, #0]
 		clz	\irqnr, \irqstat
 		rsb     \irqnr, \irqnr, #31
-- 
GitLab


From 181f817eaaca4c1f8a9c265d339d2b96de8b245d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:16 +0200
Subject: [PATCH 160/257] [ARM] support tracing when using newer compilers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Since gcc 4.4 the name and calling convention for function profiling
on ARM changed.  With this patch both types are supported.

See http://sourceware.org/ml/libc-ports/2008-04/msg00009.html for some
details.

Lightly-Tested-by: Anand Gadiyar <gadiyar@ti.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/include/asm/ftrace.h  |  1 +
 arch/arm/kernel/armksyms.c     |  1 +
 arch/arm/kernel/entry-common.S | 19 +++++++++++++++++++
 3 files changed, 21 insertions(+)

diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 39c8bc1a006..0d4c478e01b 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -7,6 +7,7 @@
 
 #ifndef __ASSEMBLY__
 extern void mcount(void);
+extern void __gnu_mcount_nc(void);
 #endif
 
 #endif
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 531e1860e54..0e627705f74 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -186,4 +186,5 @@ EXPORT_SYMBOL(_find_next_bit_be);
 
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
+EXPORT_SYMBOL(__gnu_mcount_nc);
 #endif
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41..99208728d48 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -132,6 +132,25 @@ ftrace_call:
 
 #else
 
+ENTRY(__gnu_mcount_nc)
+	stmdb sp!, {r0-r3, lr}
+	ldr r0, =ftrace_trace_function
+	ldr r2, [r0]
+	adr r0, ftrace_stub
+	cmp r0, r2
+	bne gnu_trace
+	ldmia sp!, {r0-r3, ip, lr}
+	bx ip
+
+gnu_trace:
+	ldr r1, [sp, #20]			@ lr of instrumented routine
+	mov r0, lr
+	sub r0, r0, #MCOUNT_INSN_SIZE
+	mov lr, pc
+	mov pc, r2
+	ldmia sp!, {r0-r3, ip, lr}
+	bx ip
+
 ENTRY(mcount)
 	stmdb sp!, {r0-r3, lr}
 	ldr r0, =ftrace_trace_function
-- 
GitLab


From 0d928b0b616d1c5c5fe76019a87cba171ca91633 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:17 +0200
Subject: [PATCH 161/257] Complete irq tracing support for ARM
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Before this patch enabling and disabling irqs in assembler code and by
the hardware wasn't tracked completly.

I had to transpose two instructions in arch/arm/lib/bitops.h because
restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/include/asm/assembler.h | 49 ++++++++++++++++++++++++++++----
 arch/arm/kernel/entry-armv.S     | 10 +++----
 arch/arm/lib/bitops.h            |  2 +-
 3 files changed, 49 insertions(+), 12 deletions(-)

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 15f8a092b70..44912cd5da1 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -74,23 +74,56 @@
  * Enable and disable interrupts
  */
 #if __LINUX_ARM_ARCH__ >= 6
-	.macro	disable_irq
+	.macro	disable_irq_notrace
 	cpsid	i
 	.endm
 
-	.macro	enable_irq
+	.macro	enable_irq_notrace
 	cpsie	i
 	.endm
 #else
-	.macro	disable_irq
+	.macro	disable_irq_notrace
 	msr	cpsr_c, #PSR_I_BIT | SVC_MODE
 	.endm
 
-	.macro	enable_irq
+	.macro	enable_irq_notrace
 	msr	cpsr_c, #SVC_MODE
 	.endm
 #endif
 
+	.macro asm_trace_hardirqs_off
+#if defined(CONFIG_TRACE_IRQFLAGS)
+	stmdb   sp!, {r0-r3, ip, lr}
+	bl	trace_hardirqs_off
+	ldmia	sp!, {r0-r3, ip, lr}
+#endif
+	.endm
+
+	.macro asm_trace_hardirqs_on_cond, cond
+#if defined(CONFIG_TRACE_IRQFLAGS)
+	/*
+	 * actually the registers should be pushed and pop'd conditionally, but
+	 * after bl the flags are certainly clobbered
+	 */
+	stmdb   sp!, {r0-r3, ip, lr}
+	bl\cond	trace_hardirqs_on
+	ldmia	sp!, {r0-r3, ip, lr}
+#endif
+	.endm
+
+	.macro asm_trace_hardirqs_on
+	asm_trace_hardirqs_on_cond al
+	.endm
+
+	.macro disable_irq
+	disable_irq_notrace
+	asm_trace_hardirqs_off
+	.endm
+
+	.macro enable_irq
+	asm_trace_hardirqs_on
+	enable_irq_notrace
+	.endm
 /*
  * Save the current IRQ state and disable IRQs.  Note that this macro
  * assumes FIQs are enabled, and that the processor is in SVC mode.
@@ -104,10 +137,16 @@
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.
  */
-	.macro	restore_irqs, oldcpsr
+	.macro	restore_irqs_notrace, oldcpsr
 	msr	cpsr_c, \oldcpsr
 	.endm
 
+	.macro restore_irqs, oldcpsr
+	tst	\oldcpsr, #PSR_I_BIT
+	asm_trace_hardirqs_on_cond eq
+	restore_irqs_notrace \oldcpsr
+	.endm
+
 #define USER(x...)				\
 9999:	x;					\
 	.section __ex_table,"a";		\
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index fc8af43c500..792abd0dfae 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -151,6 +151,8 @@ ENDPROC(__und_invalid)
 	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
 	@
 	stmia	r5, {r0 - r4}
+
+	asm_trace_hardirqs_off
 	.endm
 
 	.align	5
@@ -206,9 +208,6 @@ ENDPROC(__dabt_svc)
 __irq_svc:
 	svc_entry
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_off
-#endif
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -383,6 +382,8 @@ ENDPROC(__pabt_svc)
 	@ Clear FP to mark the first stack frame
 	@
 	zero_fp
+
+	asm_trace_hardirqs_off
 	.endm
 
 	.macro	kuser_cmpxchg_check
@@ -437,9 +438,6 @@ __irq_usr:
 	usr_entry
 	kuser_cmpxchg_check
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_off
-#endif
 	get_thread_info tsk
 #ifdef CONFIG_PREEMPT
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index c7f2627385e..d42252918bf 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -60,8 +60,8 @@
 	tst	r2, r0, lsl r3
 	\instr	r2, r2, r0, lsl r3
 	\store	r2, [r1]
-	restore_irqs ip
 	moveq	r0, #0
+	restore_irqs ip
 	mov	pc, lr
 	.endm
 #endif
-- 
GitLab


From d45a398fca6b03f16d01c9253c3a8c96d804f532 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:17 +0200
Subject: [PATCH 162/257] Use kernel/Kconfig.preempt for ARM
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

before this patch ARM had it's own definition of CONFIG_PREEMPT.
Instead of that use the general definition provided in
kernel/Kconfig.preempt.

This patch changes the available options in *config.  Namely PREEMPT
isn't a stand alone bool anymore, but part of a 'choice' the
following Kconfig symbols are added:

	PREEMPT_NONE
	PREEMPT_VOLUNTARY

Selecting PREEMPT_NONE now produces exactly the code as not selecting
PREEMPT before (apart from a comment in
/sys/kernel/debug/tracing/(per_cpu/cpuX/)?trace).  The only difference
PREEMPT_VOLUNTARY does is that might_resched might reschedule.  Both
should't introduce regressions.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
---
 arch/arm/Kconfig | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..eac1a927ca6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -962,18 +962,7 @@ config LOCAL_TIMERS
 	  accounting to be spread across the timer interval, preventing a
 	  "thundering herd" at every timer tick.
 
-config PREEMPT
-	bool "Preemptible Kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  This option reduces the latency of the kernel when reacting to
-	  real-time or interactive events by allowing a low priority process to
-	  be preempted even if it is in kernel mode executing a system call.
-	  This allows applications to run more reliably even when the system is
-	  under load.
-
-	  Say Y here if you are building a kernel for a desktop, embedded
-	  or real-time system.  Say N if you are unsure.
+source kernel/Kconfig.preempt
 
 config HZ
 	int
-- 
GitLab


From ac25150f2c55ea26447af0fa1d4e2bb07f97384d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 21:09:21 +0200
Subject: [PATCH 163/257] [ARM] let arch/arm/Kconfig source drivers/Kconfig
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The changes introduced by this change are:
  - drivers/mtd/Kconfig doesn't depend on ALIGNMENT_TRAP ||
    !CPU_CP15_MMU any more
  - the following files are sourced additionally:
    + drivers/macintosh/Kconfig
      completely depends on PPC || MAC || X86
    + drivers/telephony/Kconfig
      new
    + drivers/pps/Kconfig
      new
    + drivers/infiniband/Kconfig
      new
    + drivers/edac/Kconfig
      depends on X86 || PPC
    + drivers/vlynq/Kconfig
      depends on AR7 && EXPERIMENTAL (that is ARCH_MIPS)
    + drivers/xen/Kconfig
      everything depends on XEN
    + drivers/platform/Kconfig
      depends on X86
  - drivers/regulator/Kconfig is sourced later as is
    drivers/accessibility/Kconfig

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/Kconfig | 102 +----------------------------------------------
 1 file changed, 1 insertion(+), 101 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index eac1a927ca6..a7eb44a1955 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1366,107 +1366,7 @@ endmenu
 
 source "net/Kconfig"
 
-menu "Device Drivers"
-
-source "drivers/base/Kconfig"
-
-source "drivers/connector/Kconfig"
-
-if ALIGNMENT_TRAP || !CPU_CP15_MMU
-source "drivers/mtd/Kconfig"
-endif
-
-source "drivers/parport/Kconfig"
-
-source "drivers/pnp/Kconfig"
-
-source "drivers/block/Kconfig"
-
-# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
-
-source "drivers/misc/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/ata/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-# input before char - char/joystick depends on it. As does USB.
-
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-source "drivers/i2c/Kconfig"
-
-source "drivers/spi/Kconfig"
-
-source "drivers/gpio/Kconfig"
-
-source "drivers/w1/Kconfig"
-
-source "drivers/power/Kconfig"
-
-source "drivers/hwmon/Kconfig"
-
-source "drivers/thermal/Kconfig"
-
-source "drivers/watchdog/Kconfig"
-
-source "drivers/ssb/Kconfig"
-
-#source "drivers/l3/Kconfig"
-
-source "drivers/mfd/Kconfig"
-
-source "drivers/media/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/hid/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "drivers/uwb/Kconfig"
-
-source "drivers/mmc/Kconfig"
-
-source "drivers/memstick/Kconfig"
-
-source "drivers/accessibility/Kconfig"
-
-source "drivers/leds/Kconfig"
-
-source "drivers/rtc/Kconfig"
-
-source "drivers/dma/Kconfig"
-
-source "drivers/dca/Kconfig"
-
-source "drivers/auxdisplay/Kconfig"
-
-source "drivers/regulator/Kconfig"
-
-source "drivers/uio/Kconfig"
-
-source "drivers/staging/Kconfig"
-
-endmenu
+source "drivers/Kconfig"
 
 source "fs/Kconfig"
 
-- 
GitLab


From 4d4e2bc268e188a8793ce96af20576374098c17b Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Wed, 24 Jun 2009 08:05:43 +0200
Subject: [PATCH 164/257] ARM: NCP: make ncp_iodesc static and move it to
 initdata section

Make ncp_iodesc struct static to clean a public namespace a bit and move
it to __initdata section to save memory a bit.

Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-ncp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
index 6030636f854..55e9bbfaf68 100644
--- a/arch/arm/mach-s3c6410/mach-ncp.c
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -79,7 +79,7 @@ static struct platform_device *ncp_devices[] __initdata = {
 	&s3c_device_i2c0,
 };
 
-struct map_desc ncp_iodesc[] = {};
+static struct map_desc ncp_iodesc[] __initdata = {};
 
 static void __init ncp_map_io(void)
 {
-- 
GitLab


From bd258e525a40efc2c3798b76a725cd3d5c4e3d93 Mon Sep 17 00:00:00 2001
From: Matt Hsu <matt@0xlab.org>
Date: Mon, 29 Jun 2009 19:03:41 +0800
Subject: [PATCH 165/257] ARM: S3C64XX: Add UART2,UART3 support for SMDK6410
 (resend)

Add proper uartcfg for UART port 2,3 and tidy it up on SMDK6410.

Signed-off-by: Matt Hsu <matt@0xlab.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-smdk6410.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index bc9a7dea567..ea51dbe76e3 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -65,16 +65,30 @@ static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
 	},
 	[1] = {
 		.hwport	     = 1,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
 	},
 };
 
-- 
GitLab


From 25b15da14a789846672e73d19862b5fe5ad14346 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 4 Aug 2009 16:25:12 +0100
Subject: [PATCH 166/257] ARM: S3C64XX: Add mapping for IISv4 port

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d3..41d01a91a5a 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -46,6 +46,7 @@
 #define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_IISV4	(0x7F00D000)
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
 #define S3C64XX_PA_GPIO		(0x7F008000)
-- 
GitLab


From c7c8f615c8d1b49225ed86406603e7ac24d2a6d9 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 5 Aug 2009 18:21:59 +0100
Subject: [PATCH 167/257] ARM: S3C64XX: Add address mapping for AC97 controller

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 41d01a91a5a..9fdf87ae47c 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -42,6 +42,7 @@
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_WATCHDOG	(0x7E004000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
+#define S3C64XX_PA_AC97		(0x7F001000)
 #define S3C64XX_PA_IIS0		(0x7F002000)
 #define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
-- 
GitLab


From c233d94931cebc8ec805fb98856f34ad16d49e4f Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 5 Aug 2009 18:21:57 +0100
Subject: [PATCH 168/257] ARM: S3C: Move S3C64xx audio devices into S3C64xx
 directory

Allowing us to make the Kconfig a little bit saner.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Makefile                      | 1 -
 arch/arm/plat-s3c64xx/Makefile                  | 3 ++-
 arch/arm/{plat-s3c => plat-s3c64xx}/dev-audio.c | 0
 3 files changed, 2 insertions(+), 2 deletions(-)
 rename arch/arm/{plat-s3c => plat-s3c64xx}/dev-audio.c (100%)

diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 3e27720ae35..f32d045e7e3 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
-obj-$(CONFIG_SND_S3C64XX_SOC_I2S)	+= dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 3c8882cd626..b85b4359e93 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -40,4 +40,5 @@ obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
\ No newline at end of file
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
diff --git a/arch/arm/plat-s3c/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
similarity index 100%
rename from arch/arm/plat-s3c/dev-audio.c
rename to arch/arm/plat-s3c64xx/dev-audio.c
-- 
GitLab


From 229fd8ffba57dfaea59078b9144371369ffdb0a3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Mon, 3 Aug 2009 17:26:57 +0100
Subject: [PATCH 169/257] ARM: S3C24XX: Add FIQ IRQ routing support

Add support for routing an IRQ from the normal ARM IRQ mechanism to the
FIQ input of the processor.

Note, also fix a bug where the init_FIQ() function has not been called
when CONFIG_FIQ is enabled.

Signed-off-by; Ben Dooks <ben@simtec.co.uk>

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/include/plat/fiq.h | 13 +++++++++
 arch/arm/plat-s3c24xx/irq.c              | 36 ++++++++++++++++++++++++
 2 files changed, 49 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/include/plat/fiq.h

diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-s3c24xx/include/plat/fiq.h
new file mode 100644
index 00000000000..8521b8372c5
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/fiq.h
@@ -0,0 +1,13 @@
+/* linux/include/asm-arm/plat-s3c24xx/fiq.h
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU FIQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 958737775ad..d02f5f02045 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -493,6 +493,38 @@ s3c_irq_demux_extint4t7(unsigned int irq,
 	}
 }
 
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+	u32 intmod;
+	unsigned offs;
+
+	if (on) {
+		offs = irq - FIQ_START;
+		if (offs > 31)
+			return -EINVAL;
+
+		intmod = 1 << offs;
+	} else {
+		intmod = 0;
+	}
+
+	__raw_writel(intmod, S3C2410_INTMOD);
+	return 0;
+}
+#endif
+
+
 /* s3c24xx_init_irq
  *
  * Initialise S3C2410 IRQ system
@@ -505,6 +537,10 @@ void __init s3c24xx_init_irq(void)
 	int irqno;
 	int i;
 
+#ifdef CONFIG_FIQ
+	init_FIQ();
+#endif
+
 	irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
 
 	/* first, clear all interrupts pending... */
-- 
GitLab


From d91e9a7ab93e09e5a0fbed73f3a6a330f14620a4 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 5 Aug 2009 18:29:57 +0100
Subject: [PATCH 170/257] ARM: S3C24XX: Add platform device for AC97 controller

Move the definition of the "generic" IRQ in the process.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/irqs.h |  6 +++
 arch/arm/plat-s3c/include/plat/devs.h     |  1 +
 arch/arm/plat-s3c24xx/devs.c              | 50 +++++++++++++++++++++++
 sound/soc/s3c24xx/s3c24xx-ac97.h          |  6 ---
 4 files changed, 57 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 2a2384ffa7b..6c12c6312ad 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -164,6 +164,12 @@
 #define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
 #define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
 
+#ifdef CONFIG_CPU_S3C2440
+#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
+#else
+#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
+#endif
+
 /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
 #define FIQ_START		IRQ_EINT0
 
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 2e170827e0b..2e6599411c2 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -56,5 +56,6 @@ extern struct platform_device s3c_device_usb_hsotg;
 #ifdef CONFIG_CPU_S3C2440
 
 extern struct platform_device s3c_device_camif;
+extern struct platform_device s3c_device_ac97;
 
 #endif
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..4553ad6c7ad 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -26,6 +26,8 @@
 #include <asm/mach/irq.h>
 #include <mach/fb.h>
 #include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
 #include <asm/irq.h>
 
 #include <plat/regs-serial.h>
@@ -473,4 +475,52 @@ struct platform_device s3c_device_camif = {
 
 EXPORT_SYMBOL(s3c_device_camif);
 
+/* AC97 */
+
+static struct resource s3c_ac97_resource[] = {
+	[0] = {
+		.start = S3C2440_PA_AC97,
+		.end   = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_S3C244x_AC97,
+		.end   = IRQ_S3C244x_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name  = "PCM out",
+		.start = DMACH_PCM_OUT,
+		.end   = DMACH_PCM_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.name  = "PCM in",
+		.start = DMACH_PCM_IN,
+		.end   = DMACH_PCM_IN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.name  = "Mic in",
+		.start = DMACH_MIC_IN,
+		.end   = DMACH_MIC_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static u64 s3c_device_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_ac97 = {
+	.name		  = "s3c-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_ac97_resource),
+	.resource	  = s3c_ac97_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_ac97_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_ac97);
+
 #endif // CONFIG_CPU_S32440
diff --git a/sound/soc/s3c24xx/s3c24xx-ac97.h b/sound/soc/s3c24xx/s3c24xx-ac97.h
index a96dcadf28b..e96f941a810 100644
--- a/sound/soc/s3c24xx/s3c24xx-ac97.h
+++ b/sound/soc/s3c24xx/s3c24xx-ac97.h
@@ -20,12 +20,6 @@
 #define AC_CMD_ADDR(x) (x << 16)
 #define AC_CMD_DATA(x) (x & 0xffff)
 
-#ifdef CONFIG_CPU_S3C2440
-#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
-#else
-#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
-#endif
-
 extern struct snd_soc_dai s3c2443_ac97_dai[];
 
 #endif /*S3C24XXAC97_H_*/
-- 
GitLab


From a2c195fdde20772a90ee98ce3523dcfbda49eee6 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Mon, 3 Aug 2009 17:26:50 +0100
Subject: [PATCH 171/257] ARM: S3C24XX: Add SPI bus 1 on GPD8 through GPD10

Add configuration callback for SPI bus 1 on GPD[8..10] and ensure the
correct GPIO configuration register definitions in regs-gpio.h

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 .../arm/mach-s3c2410/include/mach/regs-gpio.h |  4 +-
 arch/arm/mach-s3c2410/include/mach/spi.h      |  3 ++
 arch/arm/plat-s3c24xx/Kconfig                 |  6 +++
 arch/arm/plat-s3c24xx/Makefile                |  1 +
 arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c    | 38 +++++++++++++++++++
 5 files changed, 51 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c

diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index b278d0c45cc..f6e8eec879c 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -328,13 +328,15 @@
 
 #define S3C2410_GPD8_VD16	(0x02 << 16)
 #define S3C2400_GPD8_TOUT3	(0x02 << 16)
+#define S3C2440_GPD8_SPIMISO1	(0x03 << 16)
 
 #define S3C2410_GPD9_VD17	(0x02 << 18)
 #define S3C2400_GPD9_TCLK0	(0x02 << 18)
-#define S3C2410_GPD9_MASK       (0x03 << 18)
+#define S3C2440_GPD9_SPIMOSI1	(0x03 << 18)
 
 #define S3C2410_GPD10_VD18	(0x02 << 20)
 #define S3C2400_GPD10_nWAIT	(0x02 << 20)
+#define S3C2440_GPD10_SPICLK1	(0x03 << 20)
 
 #define S3C2410_GPD11_VD19	(0x02 << 22)
 
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 1d300fb112b..193b39d654e 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -30,4 +30,7 @@ extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 					      int enable);
 
+extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+					       int enable);
+
 #endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5b0bc914f58..aaae456018b 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -105,6 +105,12 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
 	  SPI GPIO configuration code for BUS 1 when connected to
 	  GPG5, GPG6 and GPG7.
 
+config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
+	bool
+	help
+	  SPI GPIO configuration code for BUS 1 when connected to
+	  GPD8, GPD9 and GPD10.
+
 # common code for s3c24xx based machines, such as the SMDKs.
 
 config MACH_SMDK
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c282..59416796fb1 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
 
 obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
 obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7)    += spi-bus1-gpg5_6_7.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10)	 += spi-bus1-gpd8_9_10.o
 
 # machine common support
 
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
new file mode 100644
index 00000000000..89fcf5308cf
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+					int enable)
+{
+
+	printk(KERN_INFO "%s(%d)\n", __func__, enable);
+	if (enable) {
+		s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
+		s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
+		s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
+	} else {
+		s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPD(10), 1);
+		s3c2410_gpio_pullup(S3C2410_GPD(9), 1);
+		s3c2410_gpio_pullup(S3C2410_GPD(8), 1);
+	}
+}
-- 
GitLab


From cf87a6e2fe95891575c45ba1a0ecb8cf53c09732 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 20 Jul 2009 08:18:47 +0200
Subject: [PATCH 172/257] ARM: mxc: Fix i2c_board_info definitions

Fix i2c_board_info definitions - we were defining the 'type' field
of these structures twice since the first argument of I2C_BOARD_INFO
sets this field.  Move the second definition into I2C_BOARD_INFO().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
---
 arch/arm/mach-mx1/mx1ads.c          |  6 ++----
 arch/arm/mach-mx2/eukrea_cpuimx27.c |  3 +--
 arch/arm/mach-mx2/pcm038.c          | 12 ++++--------
 arch/arm/mach-mx3/pcm037.c          |  3 +--
 arch/arm/mach-mx3/pcm043.c          |  3 +--
 5 files changed, 9 insertions(+), 18 deletions(-)

diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 6af064d19b0..30f04e56faf 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -104,12 +104,10 @@ static struct imxi2c_platform_data mx1ads_i2c_data = {
 
 static struct i2c_board_info mx1ads_i2c_devices[] = {
 	{
-		I2C_BOARD_INFO("pcf857x", 0x22),
-		.type = "pcf8575",
+		I2C_BOARD_INFO("pcf8575", 0x22),
 		.platform_data = &pcf857x_data[0],
 	}, {
-		I2C_BOARD_INFO("pcf857x", 0x24),
-		.type = "pcf8575",
+		I2C_BOARD_INFO("pcf8575", 0x24),
 		.platform_data = &pcf857x_data[1],
 	},
 };
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
index a2c4181892c..7b187606682 100644
--- a/arch/arm/mach-mx2/eukrea_cpuimx27.c
+++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c
@@ -135,8 +135,7 @@ static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
 
 static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
 	{
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563"
+		I2C_BOARD_INFO("pcf8563", 0x51),
 	},
 };
 
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 638d078304c..9a3483c8f58 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -186,17 +186,13 @@ static struct at24_platform_data board_eeprom = {
 };
 
 static struct i2c_board_info pcm038_i2c_devices[] = {
-	[0] = {
+	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
-	},
-	[1] = {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563"
-	},
-	[2] = {
+	}, {
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}, {
 		I2C_BOARD_INFO("lm75", 0x4a),
-		.type = "lm75"
 	}
 };
 
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 1b9140e2303..b1b3282d15d 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -339,8 +339,7 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563",
+		I2C_BOARD_INFO("pcf8563", 0x51),
 	}
 };
 
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index 7c7d3cc07b8..e43276ea3b7 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -133,8 +133,7 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563",
+		I2C_BOARD_INFO("pcf8563", 0x51),
 	}
 };
 #endif
-- 
GitLab


From c372a5cf4cde161c7f59bbe7a9ebcfce9cb2c2f8 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 25 Jun 2009 12:37:16 +0200
Subject: [PATCH 173/257] ARM: MX3: add ckil clock

The CKIL clock source is used by the upcoming RTC driver, so we need
to export it.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 2b29491c22b..4742554e996 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -403,6 +403,11 @@ static unsigned long clk_ckih_get_rate(struct clk *clk)
 	return ckih_rate;
 }
 
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+	return CKIL_CLK_FREQ;
+}
+
 static struct clk ckih_clk = {
 	.get_rate = clk_ckih_get_rate,
 };
@@ -509,6 +514,7 @@ DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk)
 DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
 DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
 
 #define _REGISTER_CLOCK(d, n, c) \
 	{ \
@@ -566,6 +572,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "iim", iim_clk)
 	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
 	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
+	_REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
 };
 
 int __init mx31_clocks_init(unsigned long fref)
-- 
GitLab


From 12b8eb865285c95d6e2c02555f066e3f949e090d Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 10:50:52 +0200
Subject: [PATCH 174/257] MXC: use variable for irq controller base in
 entry-macro.S

This allows us to determine the irq controller base address
on runtime.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/entry-macro.S | 3 ++-
 arch/arm/plat-mxc/irq.c                      | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 5f01d60da84..7cf290efe76 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -18,7 +18,8 @@
 	.endm
 
 	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
+	ldr	\base, =avic_base
+	ldr	\base, [\base]
 #ifdef CONFIG_MXC_IRQ_PRIOR
 	ldr	r4, [\base, #AVIC_NIMASK]
 #endif
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 618a8b24ed1..778ddfe57d8 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -44,7 +44,7 @@
 #define AVIC_FIPNDH		0x60	/* fast int pending high */
 #define AVIC_FIPNDL		0x64	/* fast int pending low */
 
-static void __iomem *avic_base;
+void __iomem *avic_base;
 
 int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 {
-- 
GitLab


From fc2a9f0bc7f6dd4966dc57fb98b8697c83b6d035 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 27 May 2009 18:09:54 +0200
Subject: [PATCH 175/257] MXC: i.MX25 timer support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/time.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 7e71bb6270e..59e33a3bf7f 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -47,7 +47,7 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35 */
+/* MX31, MX35, MX25 */
 #define MX3_TCTL_WAITEN		(1 << 3)
 #define MX3_TCTL_CLK_IPG	(1 << 6)
 #define MX3_TCTL_FRR		(1 << 9)
@@ -66,7 +66,7 @@ static inline void gpt_irq_disable(void)
 {
 	unsigned int tmp;
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(0, timer_base + MX3_IR);
 	else {
 		tmp = __raw_readl(timer_base + MXC_TCTL);
@@ -76,7 +76,7 @@ static inline void gpt_irq_disable(void)
 
 static inline void gpt_irq_enable(void)
 {
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(1<<0, timer_base + MX3_IR);
 	else {
 		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
@@ -90,7 +90,7 @@ static void gpt_irq_acknowledge(void)
 		__raw_writel(0, timer_base + MX1_2_TSTAT);
 	if (cpu_is_mx2())
 		__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
 }
 
@@ -117,7 +117,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		clocksource_mxc.read = mx3_get_cycles;
 
 	clocksource_mxc.mult = clocksource_hz2mult(c,
@@ -180,7 +180,7 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
 	if (mode != clockevent_mode) {
 		/* Set event time into far-far future */
-		if (cpu_is_mx3())
+		if (cpu_is_mx3() || cpu_is_mx25())
 			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
 					timer_base + MX3_TCMP);
 		else
@@ -233,7 +233,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &clockevent_mxc;
 	uint32_t tstat;
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		tstat = __raw_readl(timer_base + MX3_TSTAT);
 	else
 		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -264,7 +264,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		clockevent_mxc.set_next_event = mx3_set_next_event;
 
 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
@@ -296,7 +296,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 	__raw_writel(0, timer_base + MXC_TCTL);
 	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
 	else
 		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
-- 
GitLab


From 6134b2cbb0e24f897fd1063745638397809fca29 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 11:16:22 +0200
Subject: [PATCH 176/257] iomux-v3: Allow for a runtime base address

also, check for a valid pad_ctrl_ofs before changing the
pad control register.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mm.c                    |  2 ++
 arch/arm/plat-mxc/include/mach/iomux-v3.h |  5 +++++
 arch/arm/plat-mxc/iomux-v3.c              | 15 ++++++++++-----
 3 files changed, 17 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index c327172159c..ad5a1122d76 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -30,6 +30,7 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
+#include <mach/iomux-v3.h>
 
 /*!
  * @file mm.c
@@ -83,6 +84,7 @@ void __init mx31_map_io(void)
 void __init mx35_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index cd06df9370c..a0fa4026546 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -113,5 +113,10 @@ void mxc_iomux_v3_release_pad(struct pad_desc *pad);
  */
 void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
 
+/*
+ * Initialise the iomux controller
+ */
+void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
+
 #endif /* __MACH_IOMUX_V3_H__*/
 
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
index 77a078f9513..851ca99bf1b 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -29,7 +29,7 @@
 #include <asm/mach/map.h>
 #include <mach/iomux-v3.h>
 
-#define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
+static void __iomem *base;
 
 static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
 
@@ -45,14 +45,14 @@ int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
 	if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
 		return -EBUSY;
 	if (pad->mux_ctrl_ofs)
-		__raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+		__raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs);
 
 	if (pad->select_input_ofs)
 		__raw_writel(pad->select_input,
-				IOMUX_BASE + pad->select_input_ofs);
+				base + pad->select_input_ofs);
 
-	if (!(pad->pad_ctrl & NO_PAD_CTRL))
-		__raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+	if (!(pad->pad_ctrl & NO_PAD_CTRL) && pad->pad_ctrl_ofs)
+		__raw_writel(pad->pad_ctrl, base + pad->pad_ctrl_ofs);
 	return 0;
 }
 EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
@@ -96,3 +96,8 @@ void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
 	}
 }
 EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
+
+void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
+{
+	base = iomux_v3_base;
+}
-- 
GitLab


From a058cbc17901108de9179dccdb29dff0e00c79fe Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Jun 2009 11:08:07 +0200
Subject: [PATCH 177/257] mxc pwm: add mx25 support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/pwm.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 42dd17b89ff..5cdbd605ac0 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -32,6 +32,7 @@
 #define MX3_PWMPR                 0x10    /* PWM Period Register */
 #define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
 #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_CLKSRC_IPG      (1 << 16)
 #define MX3_PWMCR_EN              (1 << 0)
 
 
@@ -55,9 +56,11 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
 		return -EINVAL;
 
-	if (cpu_is_mx27() || cpu_is_mx3()) {
+	if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25()) {
 		unsigned long long c;
 		unsigned long period_cycles, duty_cycles, prescale;
+		u32 cr;
+
 		c = clk_get_rate(pwm->clk);
 		c = c * period_ns;
 		do_div(c, 1000000000);
@@ -72,9 +75,15 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 
 		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
 		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
-		writel(MX3_PWMCR_PRESCALER(prescale) |
-			MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
-			pwm->mmio_base + MX3_PWMCR);
+
+		cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+
+		if (cpu_is_mx25())
+			cr |= MX3_PWMCR_CLKSRC_IPG;
+		else
+			cr |= MX3_PWMCR_CLKSRC_IPG_HIGH;
+
+		writel(cr, pwm->mmio_base + MX3_PWMCR);
 	} else if (cpu_is_mx1() || cpu_is_mx21()) {
 		/* The PWM subsystem allows for exact frequencies. However,
 		 * I cannot connect a scope on my device to the PWM line and
-- 
GitLab


From 8c25c36f33157a2e2a1fcd60b6dc00feace80631 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 11:32:12 +0200
Subject: [PATCH 178/257] Add i.MX25 support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/Makefile                            |   1 +
 arch/arm/mach-mx25/Kconfig                   |   5 +
 arch/arm/mach-mx25/Makefile                  |   2 +
 arch/arm/mach-mx25/Makefile.boot             |   3 +
 arch/arm/mach-mx25/clock.c                   | 219 ++++++++++
 arch/arm/mach-mx25/devices.c                 | 402 +++++++++++++++++++
 arch/arm/mach-mx25/devices.h                 |  19 +
 arch/arm/mach-mx25/mm.c                      |  76 ++++
 arch/arm/plat-mxc/Kconfig                    |   8 +
 arch/arm/plat-mxc/gpio.c                     |   2 +-
 arch/arm/plat-mxc/include/mach/common.h      |   3 +
 arch/arm/plat-mxc/include/mach/debug-macro.S |   9 +
 arch/arm/plat-mxc/include/mach/hardware.h    |   4 +
 arch/arm/plat-mxc/include/mach/irqs.h        |   2 +
 arch/arm/plat-mxc/include/mach/memory.h      |   2 +
 arch/arm/plat-mxc/include/mach/mx25.h        |  44 ++
 arch/arm/plat-mxc/include/mach/mxc.h         |  13 +
 arch/arm/plat-mxc/include/mach/timex.h       |   2 +
 arch/arm/plat-mxc/include/mach/uncompress.h  |   1 +
 19 files changed, 816 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-mx25/Kconfig
 create mode 100644 arch/arm/mach-mx25/Makefile
 create mode 100644 arch/arm/mach-mx25/Makefile.boot
 create mode 100644 arch/arm/mach-mx25/clock.c
 create mode 100644 arch/arm/mach-mx25/devices.c
 create mode 100644 arch/arm/mach-mx25/devices.h
 create mode 100644 arch/arm/mach-mx25/mm.c
 create mode 100644 arch/arm/plat-mxc/include/mach/mx25.h

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..95ba3c5ca14 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -135,6 +135,7 @@ machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
+machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
new file mode 100644
index 00000000000..14c918bad52
--- /dev/null
+++ b/arch/arm/mach-mx25/Kconfig
@@ -0,0 +1,5 @@
+if ARCH_MX25
+
+comment "MX25 platforms:"
+
+endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
new file mode 100644
index 00000000000..5471086d5e1
--- /dev/null
+++ b/arch/arm/mach-mx25/Makefile
@@ -0,0 +1,2 @@
+obj-y				:= mm.o devices.o
+obj-$(CONFIG_ARCH_MX25)		+= clock.o
diff --git a/arch/arm/mach-mx25/Makefile.boot b/arch/arm/mach-mx25/Makefile.boot
new file mode 100644
index 00000000000..e1dd366f836
--- /dev/null
+++ b/arch/arm/mach-mx25/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x80008000
+params_phys-y	:= 0x80000100
+initrd_phys-y	:= 0x80800000
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
new file mode 100644
index 00000000000..ef26951a527
--- /dev/null
+++ b/arch/arm/mach-mx25/clock.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+
+#define CRM_BASE	MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
+
+#define CCM_MPCTL	0x00
+#define CCM_UPCTL	0x04
+#define CCM_CCTL	0x08
+#define CCM_CGCR0	0x0C
+#define CCM_CGCR1	0x10
+#define CCM_CGCR2	0x14
+#define CCM_PCDR0	0x18
+#define CCM_PCDR1	0x1C
+#define CCM_PCDR2	0x20
+#define CCM_PCDR3	0x24
+#define CCM_RCSR	0x28
+#define CCM_CRDR	0x2C
+#define CCM_DCVR0	0x30
+#define CCM_DCVR1	0x34
+#define CCM_DCVR2	0x38
+#define CCM_DCVR3	0x3c
+#define CCM_LTR0	0x40
+#define CCM_LTR1	0x44
+#define CCM_LTR2	0x48
+#define CCM_LTR3	0x4c
+
+static unsigned long get_rate_mpll(void)
+{
+	ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL);
+
+	return mxc_decode_pll(mpctl, 24000000);
+}
+
+static unsigned long get_rate_upll(void)
+{
+	ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL);
+
+	return mxc_decode_pll(mpctl, 24000000);
+}
+
+unsigned long get_rate_arm(struct clk *clk)
+{
+	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+	unsigned long rate = get_rate_mpll();
+
+	if (cctl & (1 << 14))
+		rate = (rate * 3) >> 1;
+
+	return rate / ((cctl >> 30) + 1);
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+
+	return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1);
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+	return get_rate_ahb(NULL) >> 1;
+}
+
+static unsigned long get_rate_per(int per)
+{
+	unsigned long ofs = (per & 0x3) * 8;
+	unsigned long reg = per & ~0x3;
+	unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f;
+	unsigned long fref;
+
+	if (readl(CRM_BASE + 0x64) & (1 << per))
+		fref = get_rate_upll();
+	else
+		fref = get_rate_ipg(NULL);
+
+	return fref / (val + 1);
+}
+
+static unsigned long get_rate_uart(struct clk *clk)
+{
+	return get_rate_per(15);
+}
+
+static unsigned long get_rate_i2c(struct clk *clk)
+{
+	return get_rate_per(6);
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+	return get_rate_per(8);
+}
+
+static unsigned long get_rate_otg(struct clk *clk)
+{
+	return 48000000; /* FIXME */
+}
+
+static int clk_cgcr_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void clk_cgcr_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= CRM_BASE + er,	\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.set_rate	= sr,			\
+		.enable		= clk_cgcr_enable,	\
+		.disable	= clk_cgcr_disable,	\
+	}
+
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL);
+DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL);
+DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL);
+DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL);
+DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL);
+DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
+DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
+DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
+DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
+DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
+
+#define _REGISTER_CLOCK(d, n, c)	\
+	{				\
+		.dev_id = d,		\
+		.con_id = n,		\
+		.clk = &c,		\
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
+	_REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
+	_REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
+	_REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
+	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+	_REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+};
+
+int __init mx25_clocks_init(unsigned long fref)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+
+	return 0;
+}
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
new file mode 100644
index 00000000000..eb12de1da42
--- /dev/null
+++ b/arch/arm/mach-mx25/devices.c
@@ -0,0 +1,402 @@
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <mach/mx25.h>
+#include <mach/irqs.h>
+
+static struct resource uart0[] = {
+	{
+		.start = 0x43f90000,
+		.end = 0x43f93fff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 45,
+		.end = 45,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device0 = {
+	.name = "imx-uart",
+	.id = 0,
+	.resource = uart0,
+	.num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+	{
+		.start = 0x43f94000,
+		.end = 0x43f97fff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 32,
+		.end = 32,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device1 = {
+	.name = "imx-uart",
+	.id = 1,
+	.resource = uart1,
+	.num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+	{
+		.start = 0x5000c000,
+		.end = 0x5000ffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 18,
+		.end = 18,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device2 = {
+	.name = "imx-uart",
+	.id = 2,
+	.resource = uart2,
+	.num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource uart3[] = {
+	{
+		.start = 0x50008000,
+		.end = 0x5000bfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 5,
+		.end = 5,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device3 = {
+	.name = "imx-uart",
+	.id = 3,
+	.resource = uart3,
+	.num_resources = ARRAY_SIZE(uart3),
+};
+
+static struct resource uart4[] = {
+	{
+		.start = 0x5002c000,
+		.end = 0x5002ffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 40,
+		.end = 40,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device4 = {
+	.name = "imx-uart",
+	.id = 4,
+	.resource = uart4,
+	.num_resources = ARRAY_SIZE(uart4),
+};
+
+#define MX25_OTG_BASE_ADDR 0x53FF4000
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_otg_resources[] = {
+	{
+		.start = MX25_OTG_BASE_ADDR,
+		.end = MX25_OTG_BASE_ADDR + 0x1ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 37,
+		.end = 37,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_otg = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = mxc_otg_resources,
+	.num_resources = ARRAY_SIZE(mxc_otg_resources),
+};
+
+/* OTG gadget device */
+struct platform_device otg_udc_device = {
+	.name = "fsl-usb2-udc",
+	.id   = -1,
+	.dev  = {
+		.dma_mask          = &otg_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.resource = mxc_otg_resources,
+	.num_resources = ARRAY_SIZE(mxc_otg_resources),
+};
+
+static u64 usbh2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = MX25_OTG_BASE_ADDR + 0x400,
+		.end = MX25_OTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 35,
+		.end = 35,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
+static struct resource mxc_spi_resources0[] = {
+	{
+	       .start = 0x43fa4000,
+	       .end = 0x43fa7fff,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = 14,
+	       .end = 14,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_spi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
+	.resource = mxc_spi_resources0,
+};
+
+static struct resource mxc_spi_resources1[] = {
+	{
+	       .start = 0x50010000,
+	       .end = 0x50013fff,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = 13,
+	       .end = 13,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_spi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
+	.resource = mxc_spi_resources1,
+};
+
+static struct resource mxc_spi_resources2[] = {
+	{
+	       .start = 0x50004000,
+	       .end = 0x50007fff,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = 0,
+	       .end = 0,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_spi_device2 = {
+	.name = "spi_imx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
+	.resource = mxc_spi_resources2,
+};
+
+static struct resource mxc_pwm_resources0[] = {
+	{
+		.start	= 0x53fe0000,
+		.end	= 0x53fe3fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 26,
+		.end     = 26,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device0 = {
+	.name = "mxc_pwm",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources0),
+	.resource = mxc_pwm_resources0,
+};
+
+static struct resource mxc_pwm_resources1[] = {
+	{
+		.start	= 0x53fa0000,
+		.end	= 0x53fa3fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 36,
+		.end     = 36,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device1 = {
+	.name = "mxc_pwm",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources1),
+	.resource = mxc_pwm_resources1,
+};
+
+static struct resource mxc_pwm_resources2[] = {
+	{
+		.start	= 0x53fa8000,
+		.end	= 0x53fabfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 41,
+		.end     = 41,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device2 = {
+	.name = "mxc_pwm",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources2),
+	.resource = mxc_pwm_resources2,
+};
+
+static struct resource mxc_keypad_resources[] = {
+	{
+		.start	= 0x43fa8000,
+		.end	= 0x43fabfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 24,
+		.end     = 24,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_keypad_device = {
+	.name = "mxc-keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(mxc_keypad_resources),
+	.resource = mxc_keypad_resources,
+};
+
+static struct resource mxc_pwm_resources3[] = {
+	{
+		.start	= 0x53fc8000,
+		.end	= 0x53fcbfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 42,
+		.end     = 42,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device3 = {
+	.name = "mxc_pwm",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources3),
+	.resource = mxc_pwm_resources3,
+};
+
+static struct resource mxc_i2c_1_resources[] = {
+	{
+		.start	= 0x43f80000,
+		.end	= 0x43f83fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 3,
+		.end	= 3,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_i2c_device0 = {
+	.name = "imx-i2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
+	.resource = mxc_i2c_1_resources,
+};
+
+static struct resource mxc_i2c_2_resources[] = {
+	{
+		.start	= 0x43f98000,
+		.end	= 0x43f9bfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 4,
+		.end	= 4,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_i2c_device1 = {
+	.name = "imx-i2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
+	.resource = mxc_i2c_2_resources,
+};
+
+static struct resource mxc_i2c_3_resources[] = {
+	{
+		.start	= 0x43f84000,
+		.end	= 0x43f87fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 10,
+		.end	= 10,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_i2c_device2 = {
+	.name = "imx-i2c",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_i2c_3_resources),
+	.resource = mxc_i2c_3_resources,
+};
+
+static struct mxc_gpio_port imx_gpio_ports[] = {
+	{
+		.chip.label = "gpio-0",
+		.base = (void __iomem *)MX25_GPIO1_BASE_ADDR_VIRT,
+		.irq = 52,
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	}, {
+		.chip.label = "gpio-1",
+		.base = (void __iomem *)MX25_GPIO2_BASE_ADDR_VIRT,
+		.irq = 51,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	}, {
+		.chip.label = "gpio-2",
+		.base = (void __iomem *)MX25_GPIO3_BASE_ADDR_VIRT,
+		.irq = 16,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	}, {
+		.chip.label = "gpio-3",
+		.base = (void __iomem *)MX25_GPIO4_BASE_ADDR_VIRT,
+		.irq = 23,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+	}
+};
+
+int __init mxc_register_gpios(void)
+{
+	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
+
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
new file mode 100644
index 00000000000..fe6bf88ad1d
--- /dev/null
+++ b/arch/arm/mach-mx25/devices.h
@@ -0,0 +1,19 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_uart_device3;
+extern struct platform_device mxc_uart_device4;
+extern struct platform_device mxc_otg;
+extern struct platform_device otg_udc_device;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+extern struct platform_device mxc_pwm_device0;
+extern struct platform_device mxc_pwm_device1;
+extern struct platform_device mxc_pwm_device2;
+extern struct platform_device mxc_pwm_device3;
+extern struct platform_device mxc_keypad_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_i2c_device2;
diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c
new file mode 100644
index 00000000000..a7e587ff3e9
--- /dev/null
+++ b/arch/arm/mach-mx25/mm.c
@@ -0,0 +1,76 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/mx25.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * This table defines static virtual address mappings for I/O regions.
+ * These are the mappings common across all MX3 boards.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+	{
+		.virtual	= MX25_AVIC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX25_AVIC_BASE_ADDR),
+		.length		= MX25_AVIC_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= MX25_AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX25_AIPS1_BASE_ADDR),
+		.length		= MX25_AIPS1_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= MX25_AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX25_AIPS2_BASE_ADDR),
+		.length		= MX25_AIPS2_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx25_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX25);
+	mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx25_init_irq(void)
+{
+	mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
+}
+
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 0617c19f85c..e342a2e6160 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -20,6 +20,13 @@ config ARCH_MX2
 	help
 	  This enables support for systems based on the Freescale i.MX2 family
 
+config ARCH_MX25
+	bool "MX25-based"
+	select CPU_ARM926T
+	select COMMON_CLKDEV
+	help
+	  This enables support for systems based on the Freescale i.MX25 family
+
 config ARCH_MX3
 	bool "MX3-based"
 	select CPU_V6
@@ -32,6 +39,7 @@ endchoice
 source "arch/arm/mach-mx1/Kconfig"
 source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
+source "arch/arm/mach-mx25/Kconfig"
 
 endmenu
 
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index f0315edb3eb..cfc4a8b43e6 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -297,7 +297,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
-		if (cpu_is_mx1() || cpu_is_mx3()) {
+		if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25()) {
 			/* setup one handler for each entry */
 			set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
 			set_irq_data(port[i].irq, &port[i]);
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index cd8f215c1ad..4e7af741239 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -16,18 +16,21 @@ struct clk;
 
 extern void mx1_map_io(void);
 extern void mx21_map_io(void);
+extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
 extern void mxc_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
 extern void mx21_init_irq(void);
+extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
+extern int mx25_clocks_init(unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 4f85acd74af..bf683de56b7 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -17,6 +17,15 @@
 #define UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
 #endif
 
+#ifdef CONFIG_ARCH_MX25
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mx25.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	MX25_AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+#endif
+
 #ifdef CONFIG_ARCH_MX2
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 42e4ee37ca1..569af3239c3 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -42,6 +42,10 @@
 # include <mach/mx1.h>
 #endif
 
+#ifdef CONFIG_ARCH_MX25
+# include <mach/mx25.h>
+#endif
+
 #include <mach/mxc.h>
 
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 518a36504b8..f39e016c1cc 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -24,6 +24,8 @@
 #define MXC_GPIO_IRQS		(32 * 6)
 #elif defined CONFIG_ARCH_MX3
 #define MXC_GPIO_IRQS		(32 * 3)
+#elif defined CONFIG_ARCH_MX25
+#define MXC_GPIO_IRQS		(32 * 4)
 #endif
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 6065e00176e..42db7394111 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -22,6 +22,8 @@
 #endif
 #elif defined CONFIG_ARCH_MX3
 #define PHYS_OFFSET		UL(0x80000000)
+#elif defined CONFIG_ARCH_MX25
+#define PHYS_OFFSET		UL(0x80000000)
 #endif
 
 #if defined(CONFIG_MX1_VIDEO)
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
new file mode 100644
index 00000000000..ec64bd9a8ab
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -0,0 +1,44 @@
+#ifndef __MACH_MX25_H__
+#define __MACH_MX25_H__
+
+#define MX25_AIPS1_BASE_ADDR		0x43F00000
+#define MX25_AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define MX25_AIPS1_SIZE			SZ_1M
+#define MX25_AIPS2_BASE_ADDR		0x53F00000
+#define MX25_AIPS2_BASE_ADDR_VIRT	0xFC200000
+#define MX25_AIPS2_SIZE			SZ_1M
+#define MX25_AVIC_BASE_ADDR		0x68000000
+#define MX25_AVIC_BASE_ADDR_VIRT	0xFC400000
+#define MX25_AVIC_SIZE			SZ_1M
+
+#define MX25_IOMUXC_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xac000)
+
+#define MX25_CRM_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x80000)
+#define MX25_GPT1_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x90000)
+#define MX25_WDOG_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xdc000)
+
+#define MX25_GPIO1_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xcc000)
+#define MX25_GPIO2_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xd0000)
+#define MX25_GPIO3_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
+#define MX25_GPIO4_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
+
+#define MX25_AIPS1_IO_ADDRESS(x)  \
+	(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
+#define MX25_AIPS2_IO_ADDRESS(x)  \
+	(((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
+#define MX25_AVIC_IO_ADDRESS(x)  \
+	(((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
+
+#define __in_range(addr, name)	((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
+
+#define MX25_IO_ADDRESS(x)					\
+	(void __force __iomem *)				\
+	(__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) :	\
+	__in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) :	\
+	__in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) :	\
+	0xDEADBEEF)
+
+#define UART1_BASE_ADDR			0x43f90000
+#define UART2_BASE_ADDR			0x43f94000
+
+#endif /* __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 5fa2a07f4ea..882b816729b 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -26,6 +26,7 @@
 
 #define MXC_CPU_MX1		1
 #define MXC_CPU_MX21		21
+#define MXC_CPU_MX25		25
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
@@ -58,6 +59,18 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx21()		(0)
 #endif
 
+#ifdef CONFIG_ARCH_MX25
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX25
+# endif
+# define cpu_is_mx25()		(mxc_cpu_type == MXC_CPU_MX25)
+#else
+# define cpu_is_mx25()		(0)
+#endif
+
 #ifdef CONFIG_MACH_MX27
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 07b4a73c9d2..0707b7d5b5c 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -26,6 +26,8 @@
 #define CLOCK_TICK_RATE		13300000
 #elif defined CONFIG_ARCH_MX3
 #define CLOCK_TICK_RATE		16625000
+#elif defined CONFIG_ARCH_MX25
+#define CLOCK_TICK_RATE		16000000
 #endif
 
 #endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 98c8a60214d..b6650e705e3 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -63,6 +63,7 @@ static void putc(int ch)
 #define flush() do { } while (0)
 
 #define MX1_UART1_BASE_ADDR	0x00206000
+#define MX25_UART1_BASE_ADDR	0x43f90000
 #define MX2X_UART1_BASE_ADDR	0x1000a000
 #define MX3X_UART1_BASE_ADDR	0x43F90000
 
-- 
GitLab


From 635baf6b40ebaef683abf87d677467cba71a0d50 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 11:32:46 +0200
Subject: [PATCH 179/257] Freescale i.MX25 PDK (3ds) board support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx25/Kconfig                  |  4 ++
 arch/arm/mach-mx25/Makefile                 |  1 +
 arch/arm/mach-mx25/mx25pdk.c                | 58 +++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/uncompress.h |  3 ++
 4 files changed, 66 insertions(+)
 create mode 100644 arch/arm/mach-mx25/mx25pdk.c

diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index 14c918bad52..cc28f56eae8 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -2,4 +2,8 @@ if ARCH_MX25
 
 comment "MX25 platforms:"
 
+config MACH_MX25_3DS
+	select ARCH_MXC_IOMUX_V3
+	bool "Support MX25PDK (3DS) Platform"
+
 endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index 5471086d5e1..fe23836a9f3 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,2 +1,3 @@
 obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)		+= clock.o
+obj-$(CONFIG_MACH_MX25_3DS)	+= mx25pdk.o
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
new file mode 100644
index 00000000000..92aa4fd19d9
--- /dev/null
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -0,0 +1,58 @@
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/mx25.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
+#include <mach/iomux-v3.h>
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static void __init mx25pdk_init(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_usbh2, NULL);
+	mxc_register_device(&mxc_nand_device, &nand_board_info);
+}
+
+
+static void __init mx25pdk_timer_init(void)
+{
+	mx25_clocks_init(26000000);
+}
+
+static struct sys_timer mx25pdk_timer = {
+	.init   = mx25pdk_timer_init,
+};
+
+MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.phys_io	= MX25_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx25_map_io,
+	.init_irq       = mx25_init_irq,
+	.init_machine   = mx25pdk_init,
+	.timer          = &mx25pdk_timer,
+MACHINE_END
+
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index b6650e705e3..1e24499f20b 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -74,6 +74,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_SCB9328:
 		uart_base = MX1_UART1_BASE_ADDR;
 		break;
+	case MACH_TYPE_MX25_3DS:
+		uart_base = MX25_UART1_BASE_ADDR;
+		break;
 	case MACH_TYPE_IMX27LITE:
 	case MACH_TYPE_MX27_3DS:
 	case MACH_TYPE_MX27ADS:
-- 
GitLab


From cf983c93aea2a6cd6de5b405b7506af7732f91d0 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 15 Jul 2009 09:31:15 +0200
Subject: [PATCH 180/257] fix mx35 wrong clock

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock-imx35.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 4cf1849f552..1dbcdc07257 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -456,7 +456,7 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
 	__raw_writel(0, CCM_BASE + CCM_CGR3);
 
-	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+	mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
 
 	return 0;
 }
-- 
GitLab


From 8e5be212cba6675dc363a224ce4a98bb07039b4b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= <LW@KARO-electronics.de>
Date: Wed, 15 Jul 2009 15:19:34 +0200
Subject: [PATCH 181/257] i.MX25 iomux definitions (corrected version)

Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx25.h | 517 ++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/iomux.h      |   6 +
 2 files changed, 523 insertions(+)
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx25.h

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
new file mode 100644
index 00000000000..810c47f56e7
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -0,0 +1,517 @@
+/*
+ * arch/arm/plat-mxc/include/mach/iomux-mx25.h
+ *
+ * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
+ *
+ * based on arch/arm/mach-mx25/mx25_pins.h
+ *    Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * and
+ * arch/arm/plat-mxc/include/mach/iomux-mx35.h
+ *    Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __IOMUX_MX25_H__
+#define __IOMUX_MX25_H__
+
+#include <mach/iomux-v3.h>
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+/*
+ *
+ * @brief MX25 I/O Pin List
+ *
+ * @ingroup GPIO_MX25
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * IOMUX/PAD Bit field definitions
+ */
+
+#define MX25_PAD_A10__A10		IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A10__GPIO_4_0		IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A13__A13		IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A13__GPIO_4_1		IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A14__A14		IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A14__GPIO_2_0		IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A15__A15		IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A15__GPIO_2_1		IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A16__A16		IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A16__GPIO_2_2		IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A17__A17		IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A17__GPIO_2_3		IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A18__A18		IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A18__GPIO_2_4		IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A18__FEC_COL		IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A19__A19		IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A19__FEC_RX_ER		IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL)
+#define MX25_PAD_A19__GPIO_2_5		IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A20__A20		IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A20__GPIO_2_6		IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A20__FEC_RDATA2	IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A21__A21		IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A21__GPIO_2_7		IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A21__FEC_RDATA3	IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A22__A22		IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A22__GPIO_2_8		IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A23__A23		IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A23__GPIO_2_9		IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A24__A24		IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A24__GPIO_2_10		IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A24__FEC_RX_CLK	IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A25__A25		IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A25__GPIO_2_11		IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A25__FEC_CRS		IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL)
+
+#define MX25_PAD_EB0__EB0		IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB0__AUD4_TXD		IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB0__GPIO_2_12		IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_EB1__EB1		IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB1__AUD4_RXD		IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB1__GPIO_2_13		IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_OE__OE			IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE__AUD4_TXC		IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE__GPIO_2_14		IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS0__CS0		IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS0__GPIO_4_2		IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS1__CS1		IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS1__GPIO_4_3		IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS4__CS4		IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__UART5_CTS		IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__GPIO_3_20		IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS5__CS5		IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__UART5_RTS		IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__GPIO_3_21		IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NF_CE0__NF_CE0		IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_NF_CE0__GPIO_3_22	IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_ECB__ECB		IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_ECB__UART5_TXD_MUX	IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_ECB__GPIO_3_23		IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LBA__LBA		IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LBA__UART5_RXD_MUX	IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL)
+#define MX25_PAD_LBA__GPIO_3_24		IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_BCLK__BCLK		IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BCLK__GPIO_4_4		IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_RW__RW			IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RW__AUD4_TXFS		IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL)
+#define MX25_PAD_RW__GPIO_3_25		IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFWE_B__NFWE_B		IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFWE_B__GPIO_3_26	IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFRE_B__NFRE_B		IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFRE_B__GPIO_3_27	IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFALE__NFALE		IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFALE__GPIO_3_28	IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFCLE__NFCLE		IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFCLE__GPIO_3_29	IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFWP_B__NFWP_B		IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFWP_B__GPIO_3_30	IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFRB__NFRB		IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_NFRB__GPIO_3_31	IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D15__D15		IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__LD16		IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__GPIO_4_5		IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D14__D14		IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__LD17		IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__GPIO_4_6		IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D13__D13		IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__LD18		IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__GPIO_4_7		IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D12__D12		IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D12__GPIO_4_8		IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D11__D11		IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D11__GPIO_4_9		IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D10__D10		IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D10__GPIO_4_10		IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D10__USBOTG_OC		IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_D9__D9			IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D9__GPIO_4_11		IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D9__USBH2_PWR		IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE)
+
+#define MX25_PAD_D8__D8			IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D8__GPIO_4_12		IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D8__USBH2_OC		IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_D7__D7			IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D7__GPIO_4_13		IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D6__D6			IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D6__GPIO_4_14		IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D5__D5			IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D5__GPIO_4_15		IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D4__D4			IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D4__GPIO_4_16		IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D3__D3			IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D3__GPIO_4_17		IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D2__D2			IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D2__GPIO_4_18		IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D1__D1			IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D1__GPIO_4_19		IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D0__D0			IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D0__GPIO_4_20		IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD0__LD0		IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__CSI_D0		IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__GPIO_2_15		IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD1__LD1		IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__CSI_D1		IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__GPIO_2_16		IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD2__LD2		IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD2__GPIO_2_17		IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD3__LD3		IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD3__GPIO_2_18		IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD4__LD4		IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD4__GPIO_2_19		IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD5__LD5		IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD5__GPIO_1_19		IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD6__LD6		IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD6__GPIO_1_20		IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD7__LD7		IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD7__GPIO_1_21		IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD8__LD8		IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD8__FEC_TX_ERR	IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD9__LD9		IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD9__FEC_COL		IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD10__LD10		IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD10__FEC_RX_ER	IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD11__LD11		IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD11__FEC_RDATA2	IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD12__LD12		IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD12__FEC_RDATA3	IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD13__LD13		IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD13__FEC_TDATA2	IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD14__LD14		IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD14__FEC_TDATA3	IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD15__LD15		IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD15__FEC_RX_CLK	IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL)
+
+#define MX25_PAD_HSYNC__HSYNC		IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_HSYNC__GPIO_1_22	IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_VSYNC__VSYNC		IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSYNC__GPIO_1_23	IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LSCLK__LSCLK		IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LSCLK__GPIO_1_24	IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_OE_ACD__OE_ACD		IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE_ACD__GPIO_1_25	IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CONTRAST__CONTRAST	IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL)
+
+#define MX25_PAD_PWM__PWM		IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_PWM__GPIO_1_26		IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_PWM__USBH2_OC		IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_CSI_D2__CSI_D2		IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__UART5_RXD_MUX	IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__GPIO_1_27	IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D3__CSI_D3		IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D3__GPIO_1_28	IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D4__CSI_D4		IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__UART5_RTS	IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__GPIO_1_29	IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D5__CSI_D5		IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D5__GPIO_1_30	IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D6__CSI_D6		IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D6__GPIO_1_31	IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D7__CSI_D7		IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D7__GPIO_1_6	IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D8__CSI_D8		IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D8__GPIO_1_7	IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D9__CSI_D9		IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D9__GPIO_4_21	IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK	IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_MCLK__GPIO_1_8	IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC	IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9	IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC	IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10	IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK	IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11	IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK	IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_I2C1_CLK__GPIO_1_12	IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT	IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_I2C1_DAT__GPIO_1_13	IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI	IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14	IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO	IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15	IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0	IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16	IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1	IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17	IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK	IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18	IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY	IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22	IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN)
+#define MX25_PAD_UART1_RXD__GPIO_4_22	IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART1_TXD__GPIO_4_23	IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
+#define MX25_PAD_UART1_RTS__CSI_D0	IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL)
+#define MX25_PAD_UART1_RTS__GPIO_4_24	IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
+#define MX25_PAD_UART1_CTS__CSI_D1	IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL)
+#define MX25_PAD_UART1_CTS__GPIO_4_25	IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_RXD__GPIO_4_26	IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_TXD__GPIO_4_27	IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_RTS__UART2_RTS	IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_RTS__FEC_COL	IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_RTS__GPIO_4_28	IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_CTS__FEC_RX_ER	IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_CTS__GPIO_4_29	IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_CMD__FEC_RDATA2	IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CMD__GPIO_2_23	IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_CLK__FEC_RDATA3	IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CLK__GPIO_2_24	IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA0__GPIO_2_25	IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA1__SD1_DATA1	IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA1__AUD7_RXD	IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL)
+#define MX25_PAD_SD1_DATA1__GPIO_2_26	IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK	IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA2__GPIO_2_27	IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA3__GPIO_2_28	IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW0__GPIO_2_29	IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1	IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW1__GPIO_2_30	IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2	IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW2__CSI_D0	IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
+#define MX25_PAD_KPP_ROW2__GPIO_2_31	IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3	IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW3__CSI_LD1	IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
+#define MX25_PAD_KPP_ROW3__GPIO_3_0	IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL0__KPP_COL0	IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL0__GPIO_3_1	IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL1__KPP_COL1	IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL1__GPIO_3_2	IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL2__KPP_COL2	IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL2__GPIO_3_3	IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL3__GPIO_3_4	IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_MDC__AUD4_TXD	IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_MDC__GPIO_3_5	IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO	IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_FEC_MDIO__AUD4_RXD	IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_MDIO__GPIO_3_6	IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0	IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7	IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1	IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS	IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8	IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN	IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9   	IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0	IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10	IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1	IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11	IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV	IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RX_DV__CAN2_RX	IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12	IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN)
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13	IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_RTCK__RTCK		IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RTCK__OWIRE		IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RTCK__GPIO_3_14	IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_DE_B__DE_B		IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_DE_B__GPIO_2_20	IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_TDO__TDO		IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_GPIO_A__GPIO_A		IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_A__CAN1_TX	IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_GPIO_A__USBOTG_PWR	IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE)
+
+#define MX25_PAD_GPIO_B__GPIO_B		IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_B__CAN1_RX	IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K)
+#define MX25_PAD_GPIO_B__USBOTG_OC	IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_GPIO_C__GPIO_C		IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_C__CAN2_TX	IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
+
+#define MX25_PAD_GPIO_D__GPIO_D		IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_D__CAN2_RX	IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
+
+#define MX25_PAD_GPIO_E__GPIO_E		IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_E__AUD7_TXD	IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_GPIO_F__GPIO_F		IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_F__AUD7_TXC	IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK	IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15	IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16	IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ	IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS	IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17	IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK	IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18	IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL	IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_POWER_FAIL__AUD7_RXD	IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL)
+#define MX25_PAD_POWER_FAIL__GPIO_3_19	IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CLKO__CLKO		IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CLKO__GPIO_2_21	IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0	IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30	IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1	IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31	IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CTL_GRP_DVS_MISC	IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_FEC	IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_JTAG	IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_NFC	IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_CSI	IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_WEIM	IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_DDR	IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_CRM	IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_KPP	IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_SDHC1	IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_LCD	IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_UART	IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_NFC	IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_CSI	IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_CSPI1	IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DDRTYPE	IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_SDHC1	IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_LCD	IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+
+#endif // __ASSEMBLY__
+#endif // __IOMUX_MX25_H__
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 171f8adc110..6d49f8ae325 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -49,6 +49,9 @@
 #ifdef CONFIG_ARCH_MX2
 # define GPIO_PORT_MAX  5
 #endif
+#ifdef CONFIG_ARCH_MX25
+# define GPIO_PORT_MAX  3
+#endif
 
 #ifndef GPIO_PORT_MAX
 # error "GPIO config port count unknown!"
@@ -107,6 +110,9 @@
 #include <mach/iomux-mx27.h>
 #endif
 #endif
+#ifdef CONFIG_ARCH_MX25
+#include <mach/iomux-mx25.h>
+#endif
 
 
 /* decode irq number to use with IMR(x), ISR(x) and friends */
-- 
GitLab


From fd6ac7bb9d671d36fd7536c68fde977d197756ab Mon Sep 17 00:00:00 2001
From: Dmitriy Taychenachev <dimichxp@gmail.com>
Date: Fri, 31 Jul 2009 20:29:22 +0900
Subject: [PATCH 182/257] MXC: add basic MXC91231 support

Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/Makefile                            |   1 +
 arch/arm/mach-mxc91231/Kconfig               |  11 +
 arch/arm/mach-mxc91231/Makefile              |   2 +
 arch/arm/mach-mxc91231/Makefile.boot         |   3 +
 arch/arm/mach-mxc91231/clock.c               | 642 +++++++++++++++++++
 arch/arm/mach-mxc91231/crm_regs.h            | 399 ++++++++++++
 arch/arm/mach-mxc91231/devices.c             | 251 ++++++++
 arch/arm/mach-mxc91231/devices.h             |  13 +
 arch/arm/mach-mxc91231/magx-zn5.c            |  59 ++
 arch/arm/mach-mxc91231/mm.c                  |  94 +++
 arch/arm/mach-mxc91231/system.c              |  51 ++
 arch/arm/plat-mxc/Kconfig                    |   8 +
 arch/arm/plat-mxc/include/mach/common.h      |   6 +
 arch/arm/plat-mxc/include/mach/debug-macro.S |   8 +
 arch/arm/plat-mxc/include/mach/hardware.h    |   4 +
 arch/arm/plat-mxc/include/mach/irqs.h        |   2 +
 arch/arm/plat-mxc/include/mach/memory.h      |   2 +
 arch/arm/plat-mxc/include/mach/mxc.h         |  15 +-
 arch/arm/plat-mxc/include/mach/mxc91231.h    | 315 +++++++++
 arch/arm/plat-mxc/include/mach/system.h      |  10 +
 arch/arm/plat-mxc/include/mach/timex.h       |   2 +
 arch/arm/plat-mxc/include/mach/uncompress.h  |   4 +
 arch/arm/plat-mxc/system.c                   |   7 +
 arch/arm/plat-mxc/time.c                     |   2 +-
 24 files changed, 1909 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-mxc91231/Kconfig
 create mode 100644 arch/arm/mach-mxc91231/Makefile
 create mode 100644 arch/arm/mach-mxc91231/Makefile.boot
 create mode 100644 arch/arm/mach-mxc91231/clock.c
 create mode 100644 arch/arm/mach-mxc91231/crm_regs.h
 create mode 100644 arch/arm/mach-mxc91231/devices.c
 create mode 100644 arch/arm/mach-mxc91231/devices.h
 create mode 100644 arch/arm/mach-mxc91231/magx-zn5.c
 create mode 100644 arch/arm/mach-mxc91231/mm.c
 create mode 100644 arch/arm/mach-mxc91231/system.c
 create mode 100644 arch/arm/plat-mxc/include/mach/mxc91231.h

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 95ba3c5ca14..c1d60038328 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -159,6 +159,7 @@ machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
diff --git a/arch/arm/mach-mxc91231/Kconfig b/arch/arm/mach-mxc91231/Kconfig
new file mode 100644
index 00000000000..8e5fa38ebb6
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Kconfig
@@ -0,0 +1,11 @@
+if ARCH_MXC91231
+
+comment "MXC91231 platforms:"
+
+config MACH_MAGX_ZN5
+	bool "Support Motorola Zn5 GSM phone"
+	default n
+	help
+	  Include support for Motorola Zn5 GSM phone.
+
+endif
diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile
new file mode 100644
index 00000000000..eb70b669c55
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Makefile
@@ -0,0 +1,2 @@
+obj-y	:= mm.o clock.o devices.o system.o
+obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o
diff --git a/arch/arm/mach-mxc91231/Makefile.boot b/arch/arm/mach-mxc91231/Makefile.boot
new file mode 100644
index 00000000000..9939a19d99a
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x90008000
+params_phys-y	:= 0x90000100
+initrd_phys-y	:= 0x90800000
diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c
new file mode 100644
index 00000000000..ecfa37fef8a
--- /dev/null
+++ b/arch/arm/mach-mxc91231/clock.c
@@ -0,0 +1,642 @@
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include <asm/clkdev.h>
+#include <asm/bug.h>
+#include <asm/div64.h>
+
+#include "crm_regs.h"
+
+#define CRM_SMALL_DIVIDER(base, name) \
+	crm_small_divider(base, \
+			  base ## _ ## name ## _OFFSET, \
+			  base ## _ ## name ## _MASK)
+#define CRM_1DIVIDER(base, name) \
+	crm_divider(base, \
+		    base ## _ ## name ## _OFFSET, \
+		    base ## _ ## name ## _MASK, 1)
+#define CRM_16DIVIDER(base, name) \
+	crm_divider(base, \
+		    base ## _ ## name ## _OFFSET, \
+		    base ## _ ## name ## _MASK, 16)
+
+static u32 crm_small_divider(void __iomem *reg, u8 offset, u32 mask)
+{
+	static const u32 crm_small_dividers[] = {
+		2, 3, 4, 5, 6, 8, 10, 12
+	};
+	u8 idx;
+
+	idx = (__raw_readl(reg) & mask) >> offset;
+	if (idx > 7)
+		return 1;
+
+	return crm_small_dividers[idx];
+}
+
+static u32 crm_divider(void __iomem *reg, u8 offset, u32 mask, u32 z)
+{
+	u32 div;
+	div = (__raw_readl(reg) & mask) >> offset;
+	return div ? div : z;
+}
+
+static int _clk_1bit_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_1bit_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_3bit_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 0x7 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_3bit_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(0x7 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static unsigned long ckih_rate;
+
+static unsigned long clk_ckih_get_rate(struct clk *clk)
+{
+	return ckih_rate;
+}
+
+static struct clk ckih_clk = {
+	.get_rate = clk_ckih_get_rate,
+};
+
+static unsigned long clk_ckih_x2_get_rate(struct clk *clk)
+{
+	return 2 * clk_get_rate(clk->parent);
+}
+
+static struct clk ckih_x2_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_ckih_x2_get_rate,
+};
+
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+	return CKIL_CLK_FREQ;
+}
+
+static struct clk ckil_clk = {
+	.get_rate = clk_ckil_get_rate,
+};
+
+/* plls stuff */
+static struct clk mcu_pll_clk;
+static struct clk dsp_pll_clk;
+static struct clk usb_pll_clk;
+
+static struct clk *pll_clk(u8 sel)
+{
+	switch (sel) {
+	case 0:
+		return &mcu_pll_clk;
+	case 1:
+		return &dsp_pll_clk;
+	case 2:
+		return &usb_pll_clk;
+	}
+	BUG();
+}
+
+static void __iomem *pll_base(struct clk *clk)
+{
+	if (clk == &mcu_pll_clk)
+		return MXC_PLL0_BASE;
+	else if (clk == &dsp_pll_clk)
+		return MXC_PLL1_BASE;
+	else if (clk == &usb_pll_clk)
+		return MXC_PLL2_BASE;
+	BUG();
+}
+
+static unsigned long clk_pll_get_rate(struct clk *clk)
+{
+	const void __iomem *pllbase;
+	unsigned long dp_op, dp_mfd, dp_mfn, pll_hfsm, ref_clk, mfi;
+	long mfn, mfn_abs, mfd, pdf;
+	s64 temp;
+	pllbase = pll_base(clk);
+
+	pll_hfsm = __raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_HFSM;
+	if (pll_hfsm == 0) {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+	} else {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+	}
+
+	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+	mfi = (dp_op >> MXC_PLL_DP_OP_MFI_OFFSET) & MXC_PLL_DP_OP_PDF_MASK;
+	mfi = (mfi <= 5) ? 5 : mfi;
+	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+	mfn = dp_mfn & MXC_PLL_DP_MFN_MASK;
+	mfn = (mfn <= 0x4000000) ? mfn : (mfn - 0x10000000);
+
+	if (mfn < 0)
+		mfn_abs = -mfn;
+	else
+		mfn_abs = mfn;
+
+/* XXX: actually this asumes that ckih is fed to pll, but spec says
+ * that ckih_x2 is also possible. need to check this out.
+ */
+	ref_clk = clk_get_rate(&ckih_clk);
+
+	ref_clk *= 2;
+	ref_clk /= pdf + 1;
+
+	temp = (u64) ref_clk * mfn_abs;
+	do_div(temp, mfd);
+	if (mfn < 0)
+		temp = -temp;
+	temp += ref_clk * mfi;
+
+	return temp;
+}
+
+static int clk_pll_enable(struct clk *clk)
+{
+	void __iomem *ctl;
+	u32 reg;
+
+	ctl = pll_base(clk);
+	reg = __raw_readl(ctl);
+	reg |= (MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
+	__raw_writel(reg, ctl);
+	do {
+		reg = __raw_readl(ctl);
+	} while ((reg & MXC_PLL_DP_CTL_LRF) != MXC_PLL_DP_CTL_LRF);
+	return 0;
+}
+
+static void clk_pll_disable(struct clk *clk)
+{
+	void __iomem *ctl;
+	u32 reg;
+
+	ctl = pll_base(clk);
+	reg = __raw_readl(ctl);
+	reg &= ~(MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
+	__raw_writel(reg, ctl);
+}
+
+static struct clk mcu_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+};
+
+static struct clk dsp_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+};
+
+static struct clk usb_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+};
+/* plls stuff end */
+
+/* ap_ref_clk stuff */
+static struct clk ap_ref_clk;
+
+static unsigned long clk_ap_ref_get_rate(struct clk *clk)
+{
+	u32 ascsr, acsr;
+	u8 ap_pat_ref_div_2, ap_isel, acs, ads;
+
+	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+	acsr = __raw_readl(MXC_CRMAP_ACSR);
+
+	/* 0 for ckih, 1 for ckih*2 */
+	ap_isel = ascsr & MXC_CRMAP_ASCSR_APISEL;
+	/* reg divider */
+	ap_pat_ref_div_2 = (ascsr >> MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET) & 0x1;
+	/* undocumented, 1 for disabling divider */
+	ads = (acsr >> MXC_CRMAP_ACSR_ADS_OFFSET) & 0x1;
+	/* 0 for pat_ref, 1 for divider out */
+	acs = acsr & MXC_CRMAP_ACSR_ACS;
+
+	if (acs & !ads)
+		/* use divided clock */
+		return clk_get_rate(clk->parent) / (ap_pat_ref_div_2 ? 2 : 1);
+
+	return clk_get_rate(clk->parent) * (ap_isel ? 2 : 1);
+}
+
+static struct clk ap_ref_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_ap_ref_get_rate,
+};
+/* ap_ref_clk stuff end */
+
+/* ap_pre_dfs_clk stuff */
+static struct clk ap_pre_dfs_clk;
+
+static unsigned long clk_ap_pre_dfs_get_rate(struct clk *clk)
+{
+	u32 acsr, ascsr;
+
+	acsr = __raw_readl(MXC_CRMAP_ACSR);
+	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+
+	if (acsr & MXC_CRMAP_ACSR_ACS) {
+		u8 sel;
+		sel = (ascsr & MXC_CRMAP_ASCSR_APSEL_MASK) >>
+			MXC_CRMAP_ASCSR_APSEL_OFFSET;
+		return clk_get_rate(pll_clk(sel)) /
+			CRM_SMALL_DIVIDER(MXC_CRMAP_ACDR, ARMDIV);
+	}
+	return clk_get_rate(&ap_ref_clk);
+}
+
+static struct clk ap_pre_dfs_clk = {
+	.get_rate = clk_ap_pre_dfs_get_rate,
+};
+/* ap_pre_dfs_clk stuff end */
+
+/* usb_clk stuff */
+static struct clk usb_clk;
+
+static struct clk *clk_usb_parent(struct clk *clk)
+{
+	u32 acsr, ascsr;
+
+	acsr = __raw_readl(MXC_CRMAP_ACSR);
+	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+
+	if (acsr & MXC_CRMAP_ACSR_ACS) {
+		u8 sel;
+		sel = (ascsr & MXC_CRMAP_ASCSR_USBSEL_MASK) >>
+			MXC_CRMAP_ASCSR_USBSEL_OFFSET;
+		return pll_clk(sel);
+	}
+	return &ap_ref_clk;
+}
+
+static unsigned long clk_usb_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) /
+		CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, USBDIV);
+}
+
+static struct clk usb_clk = {
+	.enable_reg = MXC_CRMAP_ACDER2,
+	.enable_shift = MXC_CRMAP_ACDER2_USBEN_OFFSET,
+	.get_rate = clk_usb_get_rate,
+	.enable = _clk_1bit_enable,
+	.disable = _clk_1bit_disable,
+};
+/* usb_clk stuff end */
+
+static unsigned long clk_ipg_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / CRM_16DIVIDER(MXC_CRMAP_ACDR, IPDIV);
+}
+
+static unsigned long clk_ahb_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) /
+		CRM_16DIVIDER(MXC_CRMAP_ACDR, AHBDIV);
+}
+
+static struct clk ipg_clk = {
+	.parent = &ap_pre_dfs_clk,
+	.get_rate = clk_ipg_get_rate,
+};
+
+static struct clk ahb_clk = {
+	.parent = &ap_pre_dfs_clk,
+	.get_rate = clk_ahb_get_rate,
+};
+
+/* perclk_clk stuff */
+static struct clk perclk_clk;
+
+static unsigned long clk_perclk_get_rate(struct clk *clk)
+{
+	u32 acder2;
+
+	acder2 = __raw_readl(MXC_CRMAP_ACDER2);
+	if (acder2 & MXC_CRMAP_ACDER2_BAUD_ISEL_MASK)
+		return 2 * clk_get_rate(clk->parent);
+
+	return clk_get_rate(clk->parent);
+}
+
+static struct clk perclk_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_perclk_get_rate,
+};
+/* perclk_clk stuff end */
+
+/* uart_clk stuff */
+static struct clk uart_clk[];
+
+static unsigned long clk_uart_get_rate(struct clk *clk)
+{
+	u32 div;
+
+	switch (clk->id) {
+	case 0:
+	case 1:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, BAUDDIV);
+		break;
+	case 2:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRA, UART3DIV);
+		break;
+	default:
+		BUG();
+	}
+	return clk_get_rate(clk->parent) / div;
+}
+
+static struct clk uart_clk[] = {
+	{
+		.id = 0,
+		.parent = &perclk_clk,
+		.enable_reg = MXC_CRMAP_APRA,
+		.enable_shift = MXC_CRMAP_APRA_UART1EN_OFFSET,
+		.get_rate = clk_uart_get_rate,
+		.enable = _clk_1bit_enable,
+		.disable = _clk_1bit_disable,
+	}, {
+		.id = 1,
+		.parent = &perclk_clk,
+		.enable_reg = MXC_CRMAP_APRA,
+		.enable_shift = MXC_CRMAP_APRA_UART2EN_OFFSET,
+		.get_rate = clk_uart_get_rate,
+		.enable = _clk_1bit_enable,
+		.disable = _clk_1bit_disable,
+	}, {
+		.id = 2,
+		.parent = &perclk_clk,
+		.enable_reg = MXC_CRMAP_APRA,
+		.enable_shift = MXC_CRMAP_APRA_UART3EN_OFFSET,
+		.get_rate = clk_uart_get_rate,
+		.enable = _clk_1bit_enable,
+		.disable = _clk_1bit_disable,
+	},
+};
+/* uart_clk stuff end */
+
+/* sdhc_clk stuff */
+static struct clk nfc_clk;
+
+static unsigned long clk_nfc_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) /
+		CRM_1DIVIDER(MXC_CRMAP_ACDER2, NFCDIV);
+}
+
+static struct clk nfc_clk = {
+	.parent = &ahb_clk,
+	.enable_reg = MXC_CRMAP_ACDER2,
+	.enable_shift = MXC_CRMAP_ACDER2_NFCEN_OFFSET,
+	.get_rate = clk_nfc_get_rate,
+	.enable = _clk_1bit_enable,
+	.disable = _clk_1bit_disable,
+};
+/* sdhc_clk stuff end */
+
+/* sdhc_clk stuff */
+static struct clk sdhc_clk[];
+
+static struct clk *clk_sdhc_parent(struct clk *clk)
+{
+	u32 aprb;
+	u8 sel;
+	u32 mask;
+	int offset;
+
+	aprb = __raw_readl(MXC_CRMAP_APRB);
+
+	switch (clk->id) {
+	case 0:
+		mask = MXC_CRMAP_APRB_SDHC1_ISEL_MASK;
+		offset = MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET;
+		break;
+	case 1:
+		mask = MXC_CRMAP_APRB_SDHC2_ISEL_MASK;
+		offset = MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET;
+		break;
+	default:
+		BUG();
+	}
+	sel = (aprb & mask) >> offset;
+
+	switch (sel) {
+	case 0:
+		return &ckih_clk;
+	case 1:
+		return &ckih_x2_clk;
+	}
+	return &usb_clk;
+}
+
+static unsigned long clk_sdhc_get_rate(struct clk *clk)
+{
+	u32 div;
+
+	switch (clk->id) {
+	case 0:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC1_DIV);
+		break;
+	case 1:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC2_DIV);
+		break;
+	default:
+		BUG();
+	}
+
+	return clk_get_rate(clk->parent) / div;
+}
+
+static int clk_sdhc_enable(struct clk *clk)
+{
+	u32 amlpmre1, aprb;
+
+	amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
+	aprb = __raw_readl(MXC_CRMAP_APRB);
+	switch (clk->id) {
+	case 0:
+		amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
+		aprb |= (0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
+		break;
+	case 1:
+		amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
+		aprb |= (0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
+		break;
+	}
+	__raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
+	__raw_writel(aprb, MXC_CRMAP_APRB);
+	return 0;
+}
+
+static void clk_sdhc_disable(struct clk *clk)
+{
+	u32 amlpmre1, aprb;
+
+	amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
+	aprb = __raw_readl(MXC_CRMAP_APRB);
+	switch (clk->id) {
+	case 0:
+		amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
+		aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
+		break;
+	case 1:
+		amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
+		aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
+		break;
+	}
+	__raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
+	__raw_writel(aprb, MXC_CRMAP_APRB);
+}
+
+static struct clk sdhc_clk[] = {
+	{
+		.id = 0,
+		.get_rate = clk_sdhc_get_rate,
+		.enable = clk_sdhc_enable,
+		.disable = clk_sdhc_disable,
+	}, {
+		.id = 1,
+		.get_rate = clk_sdhc_get_rate,
+		.enable = clk_sdhc_enable,
+		.disable = clk_sdhc_disable,
+	},
+};
+/* sdhc_clk stuff end */
+
+/* wdog_clk stuff */
+static struct clk wdog_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRD,
+		.enable_shift = MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRD,
+		.enable_shift = MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	},
+};
+/* wdog_clk stuff end */
+
+/* gpt_clk stuff */
+static struct clk gpt_clk = {
+	.parent = &ipg_clk,
+	.enable_reg = MXC_CRMAP_AMLPMRC,
+	.enable_shift = MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET,
+	.enable = _clk_3bit_enable,
+	.disable = _clk_3bit_disable,
+};
+/* gpt_clk stuff end */
+
+/* cspi_clk stuff */
+static struct clk cspi_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRE2,
+		.enable_shift = MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRE1,
+		.enable_shift = MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	},
+};
+/* cspi_clk stuff end */
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
+	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc_clk[0])
+	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc_clk[1])
+	_REGISTER_CLOCK("mxc-wdt.0", NULL, wdog_clk[0])
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi_clk[0])
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi_clk[1])
+};
+
+int __init mxc91231_clocks_init(unsigned long fref)
+{
+	void __iomem *gpt_base;
+	int i;
+
+	ckih_rate = fref;
+
+	usb_clk.parent = clk_usb_parent(&usb_clk);
+	sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]);
+	sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]);
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR);
+	mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT);
+
+	return 0;
+}
diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h
new file mode 100644
index 00000000000..ce4f5905818
--- /dev/null
+++ b/arch/arm/mach-mxc91231/crm_regs.h
@@ -0,0 +1,399 @@
+/*
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ * Copyright 2006-2007 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
+#define _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
+
+#define CKIL_CLK_FREQ			32768
+
+#define MXC_CRM_AP_BASE			MXC91231_IO_ADDRESS(MXC91231_CRM_AP_BASE_ADDR)
+#define MXC_CRM_COM_BASE		MXC91231_IO_ADDRESS(MXC91231_CRM_COM_BASE_ADDR)
+#define MXC_DSM_BASE			MXC91231_IO_ADDRESS(MXC91231_DSM_BASE_ADDR)
+#define MXC_PLL0_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL0_BASE_ADDR)
+#define MXC_PLL1_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL1_BASE_ADDR)
+#define MXC_PLL2_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL2_BASE_ADDR)
+#define MXC_CLKCTL_BASE			MXC91231_IO_ADDRESS(MXC91231_CLKCTL_BASE_ADDR)
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL			0x00
+#define MXC_PLL_DP_CONFIG		0x04
+#define MXC_PLL_DP_OP			0x08
+#define MXC_PLL_DP_MFD			0x0C
+#define MXC_PLL_DP_MFN			0x10
+#define MXC_PLL_DP_HFS_OP		0x1C
+#define MXC_PLL_DP_HFS_MFD		0x20
+#define MXC_PLL_DP_HFS_MFN		0x24
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
+#define MXC_PLL_DP_CTL_ADE		0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
+#define MXC_PLL_DP_CTL_HFSM		0x80
+#define MXC_PLL_DP_CTL_PRE		0x40
+#define MXC_PLL_DP_CTL_UPEN		0x20
+#define MXC_PLL_DP_CTL_RST		0x10
+#define MXC_PLL_DP_CTL_RCP		0x8
+#define MXC_PLL_DP_CTL_PLM		0x4
+#define MXC_PLL_DP_CTL_BRM0		0x2
+#define MXC_PLL_DP_CTL_LRF		0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET	4
+#define MXC_PLL_DP_OP_MFI_MASK		0xF
+#define MXC_PLL_DP_OP_PDF_OFFSET	0
+#define MXC_PLL_DP_OP_PDF_MASK		0xF
+
+#define MXC_PLL_DP_MFD_OFFSET		0
+#define MXC_PLL_DP_MFD_MASK		0x7FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET		0
+#define MXC_PLL_DP_MFN_MASK		0x7FFFFFF
+
+/* CRM AP Register Offsets */
+#define MXC_CRMAP_ASCSR			(MXC_CRM_AP_BASE + 0x00)
+#define MXC_CRMAP_ACDR			(MXC_CRM_AP_BASE + 0x04)
+#define MXC_CRMAP_ACDER1		(MXC_CRM_AP_BASE + 0x08)
+#define MXC_CRMAP_ACDER2		(MXC_CRM_AP_BASE + 0x0C)
+#define MXC_CRMAP_ACGCR			(MXC_CRM_AP_BASE + 0x10)
+#define MXC_CRMAP_ACCGCR		(MXC_CRM_AP_BASE + 0x14)
+#define MXC_CRMAP_AMLPMRA		(MXC_CRM_AP_BASE + 0x18)
+#define MXC_CRMAP_AMLPMRB		(MXC_CRM_AP_BASE + 0x1C)
+#define MXC_CRMAP_AMLPMRC		(MXC_CRM_AP_BASE + 0x20)
+#define MXC_CRMAP_AMLPMRD		(MXC_CRM_AP_BASE + 0x24)
+#define MXC_CRMAP_AMLPMRE1		(MXC_CRM_AP_BASE + 0x28)
+#define MXC_CRMAP_AMLPMRE2		(MXC_CRM_AP_BASE + 0x2C)
+#define MXC_CRMAP_AMLPMRF		(MXC_CRM_AP_BASE + 0x30)
+#define MXC_CRMAP_AMLPMRG		(MXC_CRM_AP_BASE + 0x34)
+#define MXC_CRMAP_APGCR			(MXC_CRM_AP_BASE + 0x38)
+#define MXC_CRMAP_ACSR			(MXC_CRM_AP_BASE + 0x3C)
+#define MXC_CRMAP_ADCR			(MXC_CRM_AP_BASE + 0x40)
+#define MXC_CRMAP_ACR			(MXC_CRM_AP_BASE + 0x44)
+#define MXC_CRMAP_AMCR			(MXC_CRM_AP_BASE + 0x48)
+#define MXC_CRMAP_APCR			(MXC_CRM_AP_BASE + 0x4C)
+#define MXC_CRMAP_AMORA			(MXC_CRM_AP_BASE + 0x50)
+#define MXC_CRMAP_AMORB			(MXC_CRM_AP_BASE + 0x54)
+#define MXC_CRMAP_AGPR			(MXC_CRM_AP_BASE + 0x58)
+#define MXC_CRMAP_APRA			(MXC_CRM_AP_BASE + 0x5C)
+#define MXC_CRMAP_APRB			(MXC_CRM_AP_BASE + 0x60)
+#define MXC_CRMAP_APOR			(MXC_CRM_AP_BASE + 0x64)
+#define MXC_CRMAP_ADFMR			(MXC_CRM_AP_BASE + 0x68)
+
+/* CRM AP Register Bit definitions */
+#define MXC_CRMAP_ASCSR_CRS			0x10000
+#define MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET	15
+#define MXC_CRMAP_ASCSR_AP_PATREF_DIV2		0x8000
+#define MXC_CRMAP_ASCSR_USBSEL_OFFSET		13
+#define MXC_CRMAP_ASCSR_USBSEL_MASK		(0x3 << 13)
+#define MXC_CRMAP_ASCSR_CSISEL_OFFSET		11
+#define MXC_CRMAP_ASCSR_CSISEL_MASK		(0x3 << 11)
+#define MXC_CRMAP_ASCSR_SSI2SEL_OFFSET		7
+#define MXC_CRMAP_ASCSR_SSI2SEL_MASK		(0x3 << 7)
+#define MXC_CRMAP_ASCSR_SSI1SEL_OFFSET		5
+#define MXC_CRMAP_ASCSR_SSI1SEL_MASK		(0x3 << 5)
+#define MXC_CRMAP_ASCSR_APSEL_OFFSET		3
+#define MXC_CRMAP_ASCSR_APSEL_MASK		(0x3 << 3)
+#define MXC_CRMAP_ASCSR_AP_PATDIV1_OFFSET	2
+#define MXC_CRMAP_ASCSR_AP_PATREF_DIV1		0x4
+#define MXC_CRMAP_ASCSR_APISEL			0x1
+
+#define MXC_CRMAP_ACDR_ARMDIV_OFFSET		8
+#define MXC_CRMAP_ACDR_ARMDIV_MASK		(0xF << 8)
+#define MXC_CRMAP_ACDR_AHBDIV_OFFSET		4
+#define MXC_CRMAP_ACDR_AHBDIV_MASK		(0xF << 4)
+#define MXC_CRMAP_ACDR_IPDIV_OFFSET		0
+#define MXC_CRMAP_ACDR_IPDIV_MASK		0xF
+
+#define MXC_CRMAP_ACDER1_CSIEN_OFFSET		30
+#define MXC_CRMAP_ACDER1_CSIDIV_OFFSET		24
+#define MXC_CRMAP_ACDER1_CSIDIV_MASK		(0x3F << 24)
+#define MXC_CRMAP_ACDER1_SSI2EN_OFFSET		14
+#define MXC_CRMAP_ACDER1_SSI2DIV_OFFSET		8
+#define MXC_CRMAP_ACDER1_SSI2DIV_MASK		(0x3F << 8)
+#define MXC_CRMAP_ACDER1_SSI1EN_OFFSET		6
+#define MXC_CRMAP_ACDER1_SSI1DIV_OFFSET		0
+#define MXC_CRMAP_ACDER1_SSI1DIV_MASK		0x3F
+
+#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_OFFSET	24
+#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_MASK	(0x7 << 24)
+#define MXC_CRMAP_ACDER2_NFCEN_OFFSET		20
+#define MXC_CRMAP_ACDER2_NFCDIV_OFFSET		16
+#define MXC_CRMAP_ACDER2_NFCDIV_MASK		(0xF << 16)
+#define MXC_CRMAP_ACDER2_USBEN_OFFSET		12
+#define MXC_CRMAP_ACDER2_USBDIV_OFFSET		8
+#define MXC_CRMAP_ACDER2_USBDIV_MASK		(0xF << 8)
+#define MXC_CRMAP_ACDER2_BAUD_ISEL_OFFSET	5
+#define MXC_CRMAP_ACDER2_BAUD_ISEL_MASK		(0x3 << 5)
+#define MXC_CRMAP_ACDER2_BAUDDIV_OFFSET		0
+#define MXC_CRMAP_ACDER2_BAUDDIV_MASK		0xF
+
+#define MXC_CRMAP_AMLPMRA_MLPMA7_OFFSET		22
+#define MXC_CRMAP_AMLPMRA_MLPMA7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRA_MLPMA6_OFFSET		19
+#define MXC_CRMAP_AMLPMRA_MLPMA6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRA_MLPMA4_OFFSET		12
+#define MXC_CRMAP_AMLPMRA_MLPMA4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRA_MLPMA3_OFFSET		9
+#define MXC_CRMAP_AMLPMRA_MLPMA3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRA_MLPMA2_OFFSET		6
+#define MXC_CRMAP_AMLPMRA_MLPMA2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRA_MLPMA1_OFFSET		3
+#define MXC_CRMAP_AMLPMRA_MLPMA1_MASK		(0x7 << 3)
+
+#define MXC_CRMAP_AMLPMRB_MLPMB0_OFFSET		0
+#define MXC_CRMAP_AMLPMRB_MLPMB0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRC_MLPMC9_OFFSET		28
+#define MXC_CRMAP_AMLPMRC_MLPMC9_MASK		(0x7 << 28)
+#define MXC_CRMAP_AMLPMRC_MLPMC7_OFFSET		22
+#define MXC_CRMAP_AMLPMRC_MLPMC7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRC_MLPMC5_OFFSET		16
+#define MXC_CRMAP_AMLPMRC_MLPMC5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET		12
+#define MXC_CRMAP_AMLPMRC_MLPMC4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRC_MLPMC3_OFFSET		9
+#define MXC_CRMAP_AMLPMRC_MLPMC3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRC_MLPMC2_OFFSET		6
+#define MXC_CRMAP_AMLPMRC_MLPMC2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRC_MLPMC1_OFFSET		3
+#define MXC_CRMAP_AMLPMRC_MLPMC1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRC_MLPMC0_OFFSET		0
+#define MXC_CRMAP_AMLPMRC_MLPMC0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET		22
+#define MXC_CRMAP_AMLPMRD_MLPMD7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRD_MLPMD4_OFFSET		12
+#define MXC_CRMAP_AMLPMRD_MLPMD4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET		9
+#define MXC_CRMAP_AMLPMRD_MLPMD3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRD_MLPMD2_OFFSET		6
+#define MXC_CRMAP_AMLPMRD_MLPMD2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRD_MLPMD0_OFFSET		0
+#define MXC_CRMAP_AMLPMRD_MLPMD0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRE1_MLPME9_OFFSET	28
+#define MXC_CRMAP_AMLPMRE1_MLPME9_MASK		(0x7 << 28)
+#define MXC_CRMAP_AMLPMRE1_MLPME8_OFFSET	25
+#define MXC_CRMAP_AMLPMRE1_MLPME8_MASK		(0x7 << 25)
+#define MXC_CRMAP_AMLPMRE1_MLPME7_OFFSET	22
+#define MXC_CRMAP_AMLPMRE1_MLPME7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET	19
+#define MXC_CRMAP_AMLPMRE1_MLPME6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET	16
+#define MXC_CRMAP_AMLPMRE1_MLPME5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET	12
+#define MXC_CRMAP_AMLPMRE1_MLPME4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRE1_MLPME3_OFFSET	9
+#define MXC_CRMAP_AMLPMRE1_MLPME3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRE1_MLPME2_OFFSET	6
+#define MXC_CRMAP_AMLPMRE1_MLPME2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRE1_MLPME1_OFFSET	3
+#define MXC_CRMAP_AMLPMRE1_MLPME1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRE1_MLPME0_OFFSET	0
+#define MXC_CRMAP_AMLPMRE1_MLPME0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET	0
+#define MXC_CRMAP_AMLPMRE2_MLPME0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRF_MLPMF6_OFFSET		19
+#define MXC_CRMAP_AMLPMRF_MLPMF6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRF_MLPMF5_OFFSET		16
+#define MXC_CRMAP_AMLPMRF_MLPMF5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRF_MLPMF3_OFFSET		9
+#define MXC_CRMAP_AMLPMRF_MLPMF3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRF_MLPMF2_OFFSET		6
+#define MXC_CRMAP_AMLPMRF_MLPMF2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRF_MLPMF1_OFFSET		3
+#define MXC_CRMAP_AMLPMRF_MLPMF1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRF_MLPMF0_OFFSET		0
+#define MXC_CRMAP_AMLPMRF_MLPMF0_MASK		(0x7 << 0)
+
+#define MXC_CRMAP_AMLPMRG_MLPMG9_OFFSET		28
+#define MXC_CRMAP_AMLPMRG_MLPMG9_MASK		(0x7 << 28)
+#define MXC_CRMAP_AMLPMRG_MLPMG7_OFFSET		22
+#define MXC_CRMAP_AMLPMRG_MLPMG7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRG_MLPMG6_OFFSET		19
+#define MXC_CRMAP_AMLPMRG_MLPMG6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRG_MLPMG5_OFFSET		16
+#define MXC_CRMAP_AMLPMRG_MLPMG5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRG_MLPMG4_OFFSET		12
+#define MXC_CRMAP_AMLPMRG_MLPMG4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRG_MLPMG3_OFFSET		9
+#define MXC_CRMAP_AMLPMRG_MLPMG3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRG_MLPMG2_OFFSET		6
+#define MXC_CRMAP_AMLPMRG_MLPMG2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRG_MLPMG1_OFFSET		3
+#define MXC_CRMAP_AMLPMRG_MLPMG1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRG_MLPMG0_OFFSET		0
+#define MXC_CRMAP_AMLPMRG_MLPMG0_MASK		0x7
+
+#define MXC_CRMAP_AGPR_IPUPAD_OFFSET		20
+#define MXC_CRMAP_AGPR_IPUPAD_MASK		(0x7 << 20)
+
+#define MXC_CRMAP_APRA_EL1TEN_OFFSET		29
+#define MXC_CRMAP_APRA_SIMEN_OFFSET		24
+#define MXC_CRMAP_APRA_UART3DIV_OFFSET		17
+#define MXC_CRMAP_APRA_UART3DIV_MASK		(0xF << 17)
+#define MXC_CRMAP_APRA_UART3EN_OFFSET		16
+#define MXC_CRMAP_APRA_SAHARA_DIV2_CLKEN_OFFSET	14
+#define MXC_CRMAP_APRA_MQSPIEN_OFFSET		13
+#define MXC_CRMAP_APRA_UART2EN_OFFSET		8
+#define MXC_CRMAP_APRA_UART1EN_OFFSET		0
+
+#define MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET	13
+#define MXC_CRMAP_APRB_SDHC2_ISEL_MASK		(0x7 << 13)
+#define MXC_CRMAP_APRB_SDHC2_DIV_OFFSET		9
+#define MXC_CRMAP_APRB_SDHC2_DIV_MASK		(0xF << 9)
+#define MXC_CRMAP_APRB_SDHC2EN_OFFSET		8
+#define MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET	5
+#define MXC_CRMAP_APRB_SDHC1_ISEL_MASK		(0x7 << 5)
+#define MXC_CRMAP_APRB_SDHC1_DIV_OFFSET		1
+#define MXC_CRMAP_APRB_SDHC1_DIV_MASK		(0xF << 1)
+#define MXC_CRMAP_APRB_SDHC1EN_OFFSET		0
+
+#define MXC_CRMAP_ACSR_ADS_OFFSET		8
+#define MXC_CRMAP_ACSR_ADS			(0x1 << 8)
+#define MXC_CRMAP_ACSR_ACS			0x1
+
+#define MXC_CRMAP_ADCR_LFDF_0			(0x0 << 8)
+#define MXC_CRMAP_ADCR_LFDF_2			(0x1 << 8)
+#define MXC_CRMAP_ADCR_LFDF_4			(0x2 << 8)
+#define MXC_CRMAP_ADCR_LFDF_8			(0x3 << 8)
+#define MXC_CRMAP_ADCR_LFDF_OFFSET		8
+#define MXC_CRMAP_ADCR_LFDF_MASK		(0x3 << 8)
+#define MXC_CRMAP_ADCR_ALT_PLL			0x80
+#define MXC_CRMAP_ADCR_DFS_DIVEN		0x20
+#define MXC_CRMAP_ADCR_DIV_BYP			0x2
+#define MXC_CRMAP_ADCR_VSTAT			0x8
+#define MXC_CRMAP_ADCR_TSTAT			0x10
+#define MXC_CRMAP_ADCR_DVFS_VCTRL		0x10
+#define MXC_CRMAP_ADCR_CLK_ON			0x40
+
+#define MXC_CRMAP_ADFMR_FC_OFFSET		16
+#define MXC_CRMAP_ADFMR_FC_MASK			(0x1F << 16)
+#define MXC_CRMAP_ADFMR_MF_OFFSET		1
+#define MXC_CRMAP_ADFMR_MF_MASK			(0x3FF << 1)
+#define MXC_CRMAP_ADFMR_DFM_CLK_READY		0x1
+#define MXC_CRMAP_ADFMR_DFM_PWR_DOWN		0x8000
+
+#define MXC_CRMAP_ACR_CKOHS_HIGH		(1 << 18)
+#define MXC_CRMAP_ACR_CKOS_HIGH			(1 << 16)
+#define MXC_CRMAP_ACR_CKOHS_MASK		(0x7 << 12)
+#define MXC_CRMAP_ACR_CKOHD			(1 << 11)
+#define MXC_CRMAP_ACR_CKOHDIV_MASK		(0xF << 8)
+#define MXC_CRMAP_ACR_CKOHDIV_OFFSET		8
+#define MXC_CRMAP_ACR_CKOD			(1 << 7)
+#define MXC_CRMAP_ACR_CKOS_MASK			(0x7 << 4)
+
+/* AP Warm reset */
+#define MXC_CRMAP_AMCR_SW_AP			(1 << 14)
+
+/* Bit definitions of ACGCR in CRM_AP for tree level clock gating */
+#define MXC_CRMAP_ACGCR_ACG0_STOP_WAIT		0x00000001
+#define MXC_CRMAP_ACGCR_ACG0_STOP		0x00000003
+#define MXC_CRMAP_ACGCR_ACG0_RUN		0x00000007
+#define MXC_CRMAP_ACGCR_ACG0_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG1_STOP_WAIT		0x00000008
+#define MXC_CRMAP_ACGCR_ACG1_STOP		0x00000018
+#define MXC_CRMAP_ACGCR_ACG1_RUN		0x00000038
+#define MXC_CRMAP_ACGCR_ACG1_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG2_STOP_WAIT		0x00000040
+#define MXC_CRMAP_ACGCR_ACG2_STOP		0x000000C0
+#define MXC_CRMAP_ACGCR_ACG2_RUN		0x000001C0
+#define MXC_CRMAP_ACGCR_ACG2_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG3_STOP_WAIT		0x00000200
+#define MXC_CRMAP_ACGCR_ACG3_STOP		0x00000600
+#define MXC_CRMAP_ACGCR_ACG3_RUN		0x00000E00
+#define MXC_CRMAP_ACGCR_ACG3_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG4_STOP_WAIT		0x00001000
+#define MXC_CRMAP_ACGCR_ACG4_STOP		0x00003000
+#define MXC_CRMAP_ACGCR_ACG4_RUN		0x00007000
+#define MXC_CRMAP_ACGCR_ACG4_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG5_STOP_WAIT		0x00010000
+#define MXC_CRMAP_ACGCR_ACG5_STOP		0x00030000
+#define MXC_CRMAP_ACGCR_ACG5_RUN		0x00070000
+#define MXC_CRMAP_ACGCR_ACG5_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG6_STOP_WAIT		0x00080000
+#define MXC_CRMAP_ACGCR_ACG6_STOP		0x00180000
+#define MXC_CRMAP_ACGCR_ACG6_RUN		0x00380000
+#define MXC_CRMAP_ACGCR_ACG6_DISABLED		0x00000000
+
+#define NUM_GATE_CTRL				6
+
+/* CRM COM Register Offsets */
+#define MXC_CRMCOM_CSCR				(MXC_CRM_COM_BASE + 0x0C)
+#define MXC_CRMCOM_CCCR				(MXC_CRM_COM_BASE + 0x10)
+
+/* CRM COM Bit Definitions */
+#define MXC_CRMCOM_CSCR_PPD1			0x08000000
+#define MXC_CRMCOM_CSCR_CKOHSEL			(1 << 18)
+#define MXC_CRMCOM_CSCR_CKOSEL			(1 << 17)
+#define MXC_CRMCOM_CCCR_CC_DIV_OFFSET		8
+#define MXC_CRMCOM_CCCR_CC_DIV_MASK		(0x1F << 8)
+#define MXC_CRMCOM_CCCR_CC_SEL_OFFSET		0
+#define MXC_CRMCOM_CCCR_CC_SEL_MASK		0x3
+
+/* DSM Register Offsets */
+#define MXC_DSM_SLEEP_TIME			(MXC_DSM_BASE + 0x0c)
+#define MXC_DSM_CONTROL0			(MXC_DSM_BASE + 0x20)
+#define MXC_DSM_CONTROL1			(MXC_DSM_BASE + 0x24)
+#define MXC_DSM_CTREN				(MXC_DSM_BASE + 0x28)
+#define MXC_DSM_WARM_PER			(MXC_DSM_BASE + 0x40)
+#define MXC_DSM_LOCK_PER			(MXC_DSM_BASE + 0x44)
+#define MXC_DSM_MGPER				(MXC_DSM_BASE + 0x4c)
+#define MXC_DSM_CRM_CONTROL			(MXC_DSM_BASE + 0x50)
+
+/* Bit definitions of various registers in DSM */
+#define MXC_DSM_CRM_CTRL_DVFS_BYP		0x00000008
+#define MXC_DSM_CRM_CTRL_DVFS_VCTRL		0x00000004
+#define MXC_DSM_CRM_CTRL_LPMD1			0x00000002
+#define MXC_DSM_CRM_CTRL_LPMD0			0x00000001
+#define MXC_DSM_CRM_CTRL_LPMD_STOP_MODE		0x00000000
+#define MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE		0x00000001
+#define MXC_DSM_CRM_CTRL_LPMD_RUN_MODE		0x00000003
+#define MXC_DSM_CONTROL0_STBY_COMMIT_EN		0x00000200
+#define MXC_DSM_CONTROL0_MSTR_EN		0x00000001
+#define MXC_DSM_CONTROL0_RESTART		0x00000010
+/* Counter Block reset */
+#define MXC_DSM_CONTROL1_CB_RST			0x00000002
+/* State Machine reset */
+#define MXC_DSM_CONTROL1_SM_RST			0x00000004
+/* Bit needed to reset counter block */
+#define MXC_CONTROL1_RST_CNT32			0x00000008
+#define MXC_DSM_CONTROL1_RST_CNT32_EN		0x00000800
+#define MXC_DSM_CONTROL1_SLEEP			0x00000100
+#define MXC_DSM_CONTROL1_WAKEUP_DISABLE		0x00004000
+#define MXC_DSM_CTREN_CNT32			0x00000001
+
+/* Magic Fix enable bit */
+#define MXC_DSM_MGPER_EN_MGFX			0x80000000
+#define MXC_DSM_MGPER_PER_MASK			0x000003FF
+#define MXC_DSM_MGPER_PER(n)			(MXC_DSM_MGPER_PER_MASK & n)
+
+/* Address offsets of the CLKCTL registers */
+#define MXC_CLKCTL_GP_CTRL	(MXC_CLKCTL_BASE + 0x00)
+#define MXC_CLKCTL_GP_SER	(MXC_CLKCTL_BASE + 0x04)
+#define MXC_CLKCTL_GP_CER	(MXC_CLKCTL_BASE + 0x08)
+
+#endif /* _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ */
diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c
new file mode 100644
index 00000000000..353bd977b39
--- /dev/null
+++ b/arch/arm/mach-mxc91231/devices.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+
+static struct resource uart0[] = {
+	{
+		.start = MXC91231_UART1_BASE_ADDR,
+		.end = MXC91231_UART1_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_UART1_RX,
+		.end = MXC91231_INT_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART1_TX,
+		.end = MXC91231_INT_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART1_MINT,
+		.end = MXC91231_INT_UART1_MINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device0 = {
+	.name = "imx-uart",
+	.id = 0,
+	.resource = uart0,
+	.num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+	{
+		.start = MXC91231_UART2_BASE_ADDR,
+		.end = MXC91231_UART2_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_UART2_RX,
+		.end = MXC91231_INT_UART2_RX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART2_TX,
+		.end = MXC91231_INT_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART2_MINT,
+		.end = MXC91231_INT_UART2_MINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device1 = {
+	.name = "imx-uart",
+	.id = 1,
+	.resource = uart1,
+	.num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+	{
+		.start = MXC91231_UART3_BASE_ADDR,
+		.end = MXC91231_UART3_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_UART3_RX,
+		.end = MXC91231_INT_UART3_RX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART3_TX,
+		.end = MXC91231_INT_UART3_TX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART3_MINT,
+		.end = MXC91231_INT_UART3_MINT,
+		.flags = IORESOURCE_IRQ,
+
+	},
+};
+
+struct platform_device mxc_uart_device2 = {
+	.name = "imx-uart",
+	.id = 2,
+	.resource = uart2,
+	.num_resources = ARRAY_SIZE(uart2),
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port mxc_gpio_ports[] = {
+	[0] = {
+		.chip.label = "gpio-0",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO1,
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	},
+	[1] = {
+		.chip.label = "gpio-1",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO2,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	},
+	[2] = {
+		.chip.label = "gpio-2",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO3,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	},
+	[3] = {
+		.chip.label = "gpio-3",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO4,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+	},
+};
+
+int __init mxc_register_gpios(void)
+{
+	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
+}
+
+static struct resource mxc_nand_resources[] = {
+	{
+		.start	= MXC91231_NFC_BASE_ADDR,
+		.end	= MXC91231_NFC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MXC91231_INT_NANDFC,
+		.end	= MXC91231_INT_NANDFC,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mxc_nand_device = {
+	.name = "mxc_nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_nand_resources),
+	.resource = mxc_nand_resources,
+};
+
+static struct resource mxc_sdhc0_resources[] = {
+	{
+		.start = MXC91231_MMC_SDHC1_BASE_ADDR,
+		.end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_MMC_SDHC1,
+		.end = MXC91231_INT_MMC_SDHC1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource mxc_sdhc1_resources[] = {
+	{
+		.start = MXC91231_MMC_SDHC2_BASE_ADDR,
+		.end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_MMC_SDHC2,
+		.end = MXC91231_INT_MMC_SDHC2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_sdhc_device0 = {
+	.name = "mxc-mmc",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_sdhc0_resources),
+	.resource = mxc_sdhc0_resources,
+};
+
+struct platform_device mxc_sdhc_device1 = {
+	.name = "mxc-mmc",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
+	.resource = mxc_sdhc1_resources,
+};
+
+static struct resource mxc_cspi0_resources[] = {
+	{
+		.start = MXC91231_CSPI1_BASE_ADDR,
+		.end = MXC91231_CSPI1_BASE_ADDR + 0x20,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_CSPI1,
+		.end = MXC91231_INT_CSPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_cspi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_cspi0_resources),
+	.resource = mxc_cspi0_resources,
+};
+
+static struct resource mxc_cspi1_resources[] = {
+	{
+		.start = MXC91231_CSPI2_BASE_ADDR,
+		.end = MXC91231_CSPI2_BASE_ADDR + 0x20,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_CSPI2,
+		.end = MXC91231_INT_CSPI2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_cspi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_cspi1_resources),
+	.resource = mxc_cspi1_resources,
+};
+
+static struct resource mxc_wdog0_resources[] = {
+	{
+		.start = MXC91231_WDOG1_BASE_ADDR,
+		.end = MXC91231_WDOG1_BASE_ADDR + 0x10,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_wdog_device0 = {
+	.name = "mxc-wdt",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_wdog0_resources),
+	.resource = mxc_wdog0_resources,
+};
diff --git a/arch/arm/mach-mxc91231/devices.h b/arch/arm/mach-mxc91231/devices.h
new file mode 100644
index 00000000000..72a2136ce27
--- /dev/null
+++ b/arch/arm/mach-mxc91231/devices.h
@@ -0,0 +1,13 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+
+extern struct platform_device mxc_nand_device;
+
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
+
+extern struct platform_device mxc_cspi_device0;
+extern struct platform_device mxc_cspi_device1;
+
+extern struct platform_device mxc_wdog_device0;
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
new file mode 100644
index 00000000000..8757573b0a8
--- /dev/null
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This file is released under the GPLv2 or later.
+ */
+
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+};
+
+static struct imxmmc_platform_data sdhc_pdata = {
+};
+
+static void __init zn5_init(void)
+{
+	pm_power_off = mxc91231_power_off;
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
+
+	mxc_register_device(&mxc_wdog_device0, NULL);
+
+	return;
+}
+
+static void __init zn5_timer_init(void)
+{
+	mxc91231_clocks_init(26000000); /* 26mhz ckih */
+}
+
+struct sys_timer zn5_timer = {
+	.init = zn5_timer_init,
+};
+
+MACHINE_START(MAGX_ZN5, "Motorola Zn5")
+	.phys_io	= MXC91231_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mxc91231_map_io,
+	.init_irq	= mxc91231_init_irq,
+	.timer		= &zn5_timer,
+	.init_machine	= zn5_init,
+MACHINE_END
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
new file mode 100644
index 00000000000..6becda3ff33
--- /dev/null
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -0,0 +1,94 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MXC specific definitions
+ *  Copyright 2006 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/*
+ * This structure defines the MXC memory map.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+	{
+		.virtual	= MXC91231_L2CC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_L2CC_BASE_ADDR),
+		.length		= MXC91231_L2CC_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_X_MEMC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_X_MEMC_BASE_ADDR),
+		.length		= MXC91231_X_MEMC_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_ROMP_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_ROMP_BASE_ADDR),
+		.length		= MXC91231_ROMP_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_AVIC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_AVIC_BASE_ADDR),
+		.length		= MXC91231_AVIC_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_AIPS1_BASE_ADDR),
+		.length		= MXC91231_AIPS1_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_SPBA0_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_SPBA0_BASE_ADDR),
+		.length		= MXC91231_SPBA0_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_SPBA1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_SPBA1_BASE_ADDR),
+		.length		= MXC91231_SPBA1_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_AIPS2_BASE_ADDR),
+		.length		= MXC91231_AIPS2_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory map for
+ * the IO modules.
+ */
+void __init mxc91231_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MXC91231);
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mxc91231_init_irq(void)
+{
+	mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mxc91231/system.c b/arch/arm/mach-mxc91231/system.c
new file mode 100644
index 00000000000..736f7efd874
--- /dev/null
+++ b/arch/arm/mach-mxc91231/system.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This file is released under the GPLv2 or later.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/proc-fns.h>
+#include <mach/hardware.h>
+
+#include "crm_regs.h"
+
+#define WDOG_WCR		MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR)
+#define WDOG_WCR_OUT_ENABLE	(1 << 6)
+#define WDOG_WCR_ASSERT		(1 << 5)
+
+void mxc91231_power_off(void)
+{
+	u16 wcr;
+
+	wcr = __raw_readw(WDOG_WCR);
+	wcr |= WDOG_WCR_OUT_ENABLE;
+	wcr &= ~WDOG_WCR_ASSERT;
+	__raw_writew(wcr, WDOG_WCR);
+}
+
+void mxc91231_arch_reset(char mode, const char *cmd)
+{
+	u32 amcr;
+
+	/* Reset the AP using CRM */
+	amcr = __raw_readl(MXC_CRMAP_AMCR);
+	amcr &= ~MXC_CRMAP_AMCR_SW_AP;
+	__raw_writel(amcr, MXC_CRMAP_AMCR);
+
+	mdelay(10);
+	cpu_reset(0);
+}
+
+void mxc91231_prepare_idle(void)
+{
+	u32 crm_ctl;
+
+	/* Go to WAIT mode after WFI */
+	crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL);
+	crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1);
+	crm_ctl |=  MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE;
+	__raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL);
+}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index e342a2e6160..ca5c7c22634 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -34,12 +34,20 @@ config ARCH_MX3
 	help
 	  This enables support for systems based on the Freescale i.MX3 family
 
+config ARCH_MXC91231
+	bool "MXC91231-based"
+	select CPU_V6
+	select COMMON_CLKDEV
+	help
+	  This enables support for systems based on the Freescale MXC91231 family
+
 endchoice
 
 source "arch/arm/mach-mx1/Kconfig"
 source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 source "arch/arm/mach-mx25/Kconfig"
+source "arch/arm/mach-mxc91231/Kconfig"
 
 endmenu
 
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 4e7af741239..286cb9b0a25 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,6 +20,7 @@ extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
+extern void mxc91231_map_io(void);
 extern void mxc_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
 extern void mx21_init_irq(void);
@@ -27,6 +28,7 @@ extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
+extern void mxc91231_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
@@ -34,9 +36,13 @@ extern int mx25_clocks_init(unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
+extern int mxc91231_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
 extern void mxc_arch_reset_init(void __iomem *);
+extern void mxc91231_power_off(void);
+extern void mxc91231_arch_reset(int, const char *);
+extern void mxc91231_prepare_idle(void);
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index bf683de56b7..15b2b148a10 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -44,6 +44,14 @@
 #define UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
 
+#ifdef CONFIG_ARCH_MXC91231
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mxc91231.h>
+#define UART_PADDR	MXC91231_UART2_BASE_ADDR
+#define UART_VADDR	MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
+#endif
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 569af3239c3..78db75475f6 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -46,6 +46,10 @@
 # include <mach/mx25.h>
 #endif
 
+#ifdef CONFIG_ARCH_MXC91231
+# include <mach/mxc91231.h>
+#endif
+
 #include <mach/mxc.h>
 
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index f39e016c1cc..ead9d592168 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -26,6 +26,8 @@
 #define MXC_GPIO_IRQS		(32 * 3)
 #elif defined CONFIG_ARCH_MX25
 #define MXC_GPIO_IRQS		(32 * 4)
+#elif defined CONFIG_ARCH_MXC91231
+#define MXC_GPIO_IRQS		(32 * 4)
 #endif
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 42db7394111..d3afafdcc0e 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -24,6 +24,8 @@
 #define PHYS_OFFSET		UL(0x80000000)
 #elif defined CONFIG_ARCH_MX25
 #define PHYS_OFFSET		UL(0x80000000)
+#elif defined CONFIG_ARCH_MXC91231
+#define PHYS_OFFSET		UL(0x90000000)
 #endif
 
 #if defined(CONFIG_MX1_VIDEO)
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 882b816729b..51990536b84 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -30,6 +30,7 @@
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
+#define MXC_CPU_MXC91231	91231
 
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
@@ -107,13 +108,25 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx35()		(0)
 #endif
 
+#ifdef CONFIG_ARCH_MXC91231
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MXC91231
+# endif
+# define cpu_is_mxc91231()	(mxc_cpu_type == MXC_CPU_MXC91231)
+#else
+# define cpu_is_mxc91231()	(0)
+#endif
+
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
 #define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
 #define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
 #define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
 #endif
 
-#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
+#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
 #define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
 
 #endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
new file mode 100644
index 00000000000..81484d1ef23
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -0,0 +1,315 @@
+/*
+ *  Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - Platform specific register memory map
+ *
+ *  Copyright 2005-2007 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __MACH_MXC91231_H__
+#define __MACH_MXC91231_H__
+
+/*
+ * L2CC
+ */
+#define MXC91231_L2CC_BASE_ADDR		0x30000000
+#define MXC91231_L2CC_BASE_ADDR_VIRT	0xF9000000
+#define MXC91231_L2CC_SIZE		SZ_64K
+
+/*
+ * AIPS 1
+ */
+#define MXC91231_AIPS1_BASE_ADDR	0x43F00000
+#define MXC91231_AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define MXC91231_AIPS1_SIZE		SZ_1M
+
+#define MXC91231_AIPS1_CTRL_BASE_ADDR	MXC91231_AIPS1_BASE_ADDR
+#define MXC91231_MAX_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x04000)
+#define MXC91231_EVTMON_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x08000)
+#define MXC91231_CLKCTL_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x0C000)
+#define MXC91231_ETB_SLOT4_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x10000)
+#define MXC91231_ETB_SLOT5_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x14000)
+#define MXC91231_ECT_CTIO_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x18000)
+#define MXC91231_I2C_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x80000)
+#define MXC91231_MU_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x88000)
+#define MXC91231_UART1_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x90000)
+#define MXC91231_UART2_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x94000)
+#define MXC91231_DSM_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x98000)
+#define MXC91231_OWIRE_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x9C000)
+#define MXC91231_SSI1_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0xA0000)
+#define MXC91231_KPP_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0xA8000)
+#define MXC91231_IOMUX_AP_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0xAC000)
+#define MXC91231_CTI_AP_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0xB8000)
+
+/*
+ * AIPS 2
+ */
+#define MXC91231_AIPS2_BASE_ADDR	0x53F00000
+#define MXC91231_AIPS2_BASE_ADDR_VIRT	0xFC100000
+#define MXC91231_AIPS2_SIZE		SZ_1M
+
+#define MXC91231_GEMK_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0x8C000)
+#define MXC91231_GPT1_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0x90000)
+#define MXC91231_EPIT1_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0x94000)
+#define MXC91231_SCC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xAC000)
+#define MXC91231_RNGA_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xB0000)
+#define MXC91231_IPU_CTRL_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xC0000)
+#define MXC91231_AUDMUX_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xC4000)
+#define MXC91231_EDIO_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xC8000)
+#define MXC91231_GPIO1_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xCC000)
+#define MXC91231_GPIO2_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xD0000)
+#define MXC91231_SDMA_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xD4000)
+#define MXC91231_RTC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xD8000)
+#define MXC91231_WDOG1_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xDC000)
+#define MXC91231_PWM_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xE0000)
+#define MXC91231_GPIO3_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xE4000)
+#define MXC91231_WDOG2_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xE8000)
+#define MXC91231_RTIC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xEC000)
+#define MXC91231_LPMC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xF0000)
+
+/*
+ * SPBA global module 0
+ */
+#define MXC91231_SPBA0_BASE_ADDR	0x50000000
+#define MXC91231_SPBA0_BASE_ADDR_VIRT	0xFC200000
+#define MXC91231_SPBA0_SIZE		SZ_1M
+
+#define MXC91231_MMC_SDHC1_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x04000)
+#define MXC91231_MMC_SDHC2_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x08000)
+#define MXC91231_UART3_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x0C000)
+#define MXC91231_CSPI2_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x10000)
+#define MXC91231_SSI2_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x14000)
+#define MXC91231_SIM_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x18000)
+#define MXC91231_IIM_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x1C000)
+#define MXC91231_CTI_SDMA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x20000)
+#define MXC91231_USBOTG_CTRL_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x24000)
+#define MXC91231_USBOTG_DATA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x28000)
+#define MXC91231_CSPI1_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x30000)
+#define MXC91231_SPBA_CTRL_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x3C000)
+#define MXC91231_IOMUX_COM_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x40000)
+#define MXC91231_CRM_COM_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x44000)
+#define MXC91231_CRM_AP_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x48000)
+#define MXC91231_PLL0_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x4C000)
+#define MXC91231_PLL1_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x50000)
+#define MXC91231_PLL2_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x54000)
+#define MXC91231_GPIO4_SH_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x58000)
+#define MXC91231_HAC_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x5C000)
+#define MXC91231_SAHARA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x5C000)
+#define MXC91231_PLL3_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x60000)
+
+/*
+ * SPBA global module 1
+ */
+#define MXC91231_SPBA1_BASE_ADDR	0x52000000
+#define MXC91231_SPBA1_BASE_ADDR_VIRT	0xFC300000
+#define MXC91231_SPBA1_SIZE		SZ_1M
+
+#define MXC91231_MQSPI_BASE_ADDR	(MXC91231_SPBA1_BASE_ADDR + 0x34000)
+#define MXC91231_EL1T_BASE_ADDR		(MXC91231_SPBA1_BASE_ADDR + 0x38000)
+
+/*!
+ * Defines for SPBA modules
+ */
+#define MXC91231_SPBA_SDHC1		0x04
+#define MXC91231_SPBA_SDHC2		0x08
+#define MXC91231_SPBA_UART3		0x0C
+#define MXC91231_SPBA_CSPI2		0x10
+#define MXC91231_SPBA_SSI2		0x14
+#define MXC91231_SPBA_SIM		0x18
+#define MXC91231_SPBA_IIM		0x1C
+#define MXC91231_SPBA_CTI_SDMA		0x20
+#define MXC91231_SPBA_USBOTG_CTRL_REGS	0x24
+#define MXC91231_SPBA_USBOTG_DATA_REGS	0x28
+#define MXC91231_SPBA_CSPI1		0x30
+#define MXC91231_SPBA_MQSPI		0x34
+#define MXC91231_SPBA_EL1T		0x38
+#define MXC91231_SPBA_IOMUX		0x40
+#define MXC91231_SPBA_CRM_COM		0x44
+#define MXC91231_SPBA_CRM_AP		0x48
+#define MXC91231_SPBA_PLL0		0x4C
+#define MXC91231_SPBA_PLL1		0x50
+#define MXC91231_SPBA_PLL2		0x54
+#define MXC91231_SPBA_GPIO4		0x58
+#define MXC91231_SPBA_SAHARA		0x5C
+
+/*
+ * ROMP and AVIC
+ */
+#define MXC91231_ROMP_BASE_ADDR		0x60000000
+#define MXC91231_ROMP_BASE_ADDR_VIRT	0xFC400000
+#define MXC91231_ROMP_SIZE		SZ_64K
+
+#define MXC91231_AVIC_BASE_ADDR		0x68000000
+#define MXC91231_AVIC_BASE_ADDR_VIRT	0xFC410000
+#define MXC91231_AVIC_SIZE		SZ_64K
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MXC91231_X_MEMC_BASE_ADDR	0xB8000000
+#define MXC91231_X_MEMC_BASE_ADDR_VIRT	0xFC420000
+#define MXC91231_X_MEMC_SIZE		SZ_64K
+
+#define MXC91231_NFC_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x0000)
+#define MXC91231_ESDCTL_BASE_ADDR	(MXC91231_X_MEMC_BASE_ADDR + 0x1000)
+#define MXC91231_WEIM_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x2000)
+#define MXC91231_M3IF_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x3000)
+#define MXC91231_EMI_CTL_BASE_ADDR	(MXC91231_X_MEMC_BASE_ADDR + 0x4000)
+
+/*
+ * Memory regions and CS
+ * CPLD is connected on CS4
+ * CS5 is TP1021 or it is not connected
+ * */
+#define MXC91231_FB_RAM_BASE_ADDR	0x78000000
+#define MXC91231_FB_RAM_SIZE		SZ_256K
+#define MXC91231_CSD0_BASE_ADDR		0x80000000
+#define MXC91231_CSD1_BASE_ADDR		0x90000000
+#define MXC91231_CS0_BASE_ADDR		0xA0000000
+#define MXC91231_CS1_BASE_ADDR		0xA8000000
+#define MXC91231_CS2_BASE_ADDR		0xB0000000
+#define MXC91231_CS3_BASE_ADDR		0xB2000000
+#define MXC91231_CS4_BASE_ADDR		0xB4000000
+#define MXC91231_CS5_BASE_ADDR		0xB6000000
+
+/* Is given address belongs to the specified memory region? */
+#define ADDRESS_IN_REGION(addr, start, size) \
+	(((addr) >= (start)) && ((addr) < (start)+(size)))
+
+/* Is given address belongs to the specified named `module'? */
+#define MXC91231_IS_MODULE(addr, module) \
+	ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \
+	                        MXC91231_ ## module ## _SIZE)
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+
+#define MXC91231_IO_ADDRESS(x) \
+	(void __iomem *) \
+	(MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \
+	 0xDEADBEEF)
+
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define MXC91231_L2CC_IO_ADDRESS(x)  \
+	(((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT)
+
+#define MXC91231_AIPS1_IO_ADDRESS(x)  \
+	(((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT)
+
+#define MXC91231_SPBA0_IO_ADDRESS(x)  \
+	(((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT)
+
+#define MXC91231_SPBA1_IO_ADDRESS(x)  \
+	(((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT)
+
+#define MXC91231_AIPS2_IO_ADDRESS(x)  \
+	(((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT)
+
+#define MXC91231_ROMP_IO_ADDRESS(x)  \
+	(((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT)
+
+#define MXC91231_AVIC_IO_ADDRESS(x)  \
+	(((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT)
+
+#define MXC91231_X_MEMC_IO_ADDRESS(x)  \
+	(((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT)
+
+/*
+ * Interrupt numbers
+ */
+#define MXC91231_INT_GPIO3		0
+#define MXC91231_INT_EL1T_CI		1
+#define MXC91231_INT_EL1T_RFCI		2
+#define MXC91231_INT_EL1T_RFI		3
+#define MXC91231_INT_EL1T_MCU		4
+#define MXC91231_INT_EL1T_IPI		5
+#define MXC91231_INT_MU_GEN		6
+#define MXC91231_INT_GPIO4		7
+#define MXC91231_INT_MMC_SDHC2		8
+#define MXC91231_INT_MMC_SDHC1		9
+#define MXC91231_INT_I2C		10
+#define MXC91231_INT_SSI2		11
+#define MXC91231_INT_SSI1		12
+#define MXC91231_INT_CSPI2		13
+#define MXC91231_INT_CSPI1		14
+#define MXC91231_INT_RTIC		15
+#define MXC91231_INT_SAHARA		15
+#define MXC91231_INT_HAC		15
+#define MXC91231_INT_UART3_RX		16
+#define MXC91231_INT_UART3_TX		17
+#define MXC91231_INT_UART3_MINT		18
+#define MXC91231_INT_ECT		19
+#define MXC91231_INT_SIM_IPB		20
+#define MXC91231_INT_SIM_DATA		21
+#define MXC91231_INT_RNGA		22
+#define MXC91231_INT_DSM_AP		23
+#define MXC91231_INT_KPP		24
+#define MXC91231_INT_RTC		25
+#define MXC91231_INT_PWM		26
+#define MXC91231_INT_GEMK_AP		27
+#define MXC91231_INT_EPIT		28
+#define MXC91231_INT_GPT		29
+#define MXC91231_INT_UART2_RX		30
+#define MXC91231_INT_UART2_TX		31
+#define MXC91231_INT_UART2_MINT		32
+#define MXC91231_INT_NANDFC		33
+#define MXC91231_INT_SDMA		34
+#define MXC91231_INT_USB_WAKEUP		35
+#define MXC91231_INT_USB_SOF		36
+#define MXC91231_INT_PMU_EVTMON		37
+#define MXC91231_INT_USB_FUNC		38
+#define MXC91231_INT_USB_DMA		39
+#define MXC91231_INT_USB_CTRL		40
+#define MXC91231_INT_IPU_ERR		41
+#define MXC91231_INT_IPU_SYN		42
+#define MXC91231_INT_UART1_RX		43
+#define MXC91231_INT_UART1_TX		44
+#define MXC91231_INT_UART1_MINT		45
+#define MXC91231_INT_IIM		46
+#define MXC91231_INT_MU_RX_OR		47
+#define MXC91231_INT_MU_TX_OR		48
+#define MXC91231_INT_SCC_SCM		49
+#define MXC91231_INT_SCC_SMN		50
+#define MXC91231_INT_GPIO2		51
+#define MXC91231_INT_GPIO1		52
+#define MXC91231_INT_MQSPI1		53
+#define MXC91231_INT_MQSPI2		54
+#define MXC91231_INT_WDOG2		55
+#define MXC91231_INT_EXT_INT7		56
+#define MXC91231_INT_EXT_INT6		57
+#define MXC91231_INT_EXT_INT5		58
+#define MXC91231_INT_EXT_INT4		59
+#define MXC91231_INT_EXT_INT3		60
+#define MXC91231_INT_EXT_INT2		61
+#define MXC91231_INT_EXT_INT1		62
+#define MXC91231_INT_EXT_INT0		63
+
+#define MXC91231_MAX_INT_LINES		63
+#define MXC91231_MAX_EXT_LINES		8
+
+#endif /* __MACH_MXC91231_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index e56241af870..ef00199568d 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -21,8 +21,18 @@
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
 #define __ASM_ARCH_MXC_SYSTEM_H__
 
+#include <mach/hardware.h>
+#include <mach/common.h>
+
 static inline void arch_idle(void)
 {
+#ifdef CONFIG_ARCH_MXC91231
+	if (cpu_is_mxc91231()) {
+		/* Need this to set DSM low-power mode */
+		mxc91231_prepare_idle();
+	}
+#endif
+
 	cpu_do_idle();
 }
 
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 0707b7d5b5c..527a6c24788 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -28,6 +28,8 @@
 #define CLOCK_TICK_RATE		16625000
 #elif defined CONFIG_ARCH_MX25
 #define CLOCK_TICK_RATE		16000000
+#elif defined CONFIG_ARCH_MXC91231
+#define CLOCK_TICK_RATE		13000000
 #endif
 
 #endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 1e24499f20b..082a3908256 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -66,6 +66,7 @@ static void putc(int ch)
 #define MX25_UART1_BASE_ADDR	0x43f90000
 #define MX2X_UART1_BASE_ADDR	0x1000a000
 #define MX3X_UART1_BASE_ADDR	0x43F90000
+#define MX3X_UART2_BASE_ADDR	0x43F94000
 
 static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 {
@@ -95,6 +96,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_PCM043:
 		uart_base = MX3X_UART1_BASE_ADDR;
 		break;
+	case MACH_TYPE_MAGX_ZN5:
+		uart_base = MX3X_UART2_BASE_ADDR;
+		break;
 	default:
 		break;
 	}
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 15e30532f4a..97f42799fa5 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
@@ -39,6 +40,12 @@ void arch_reset(char mode, const char *cmd)
 {
 	unsigned int wcr_enable;
 
+#ifdef CONFIG_ARCH_MXC91231
+	if (cpu_is_mxc91231()) {
+		mxc91231_arch_reset(mode, cmd);
+		return;
+	}
+#endif
 	if (cpu_is_mx1()) {
 		wcr_enable = (1 << 0);
 	} else {
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 59e33a3bf7f..844567ee35f 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -47,7 +47,7 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35, MX25 */
+/* MX31, MX35, MX25, MXC91231 */
 #define MX3_TCTL_WAITEN		(1 << 3)
 #define MX3_TCTL_CLK_IPG	(1 << 6)
 #define MX3_TCTL_FRR		(1 << 9)
-- 
GitLab


From 94da274b4982f5b36b55bde0c76d3ef8233bceda Mon Sep 17 00:00:00 2001
From: Dmitriy Taychenachev <dimichxp@gmail.com>
Date: Fri, 31 Jul 2009 20:29:23 +0900
Subject: [PATCH 183/257] MXC: add iomux pins configuration support for
 MXC91231

Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mxc91231/Makefile               |   2 +-
 arch/arm/mach-mxc91231/iomux.c                | 177 +++++++++++
 arch/arm/mach-mxc91231/magx-zn5.c             |   4 +
 .../plat-mxc/include/mach/iomux-mxc91231.h    | 287 ++++++++++++++++++
 4 files changed, 469 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-mxc91231/iomux.c
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mxc91231.h

diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile
index eb70b669c55..011d5e19712 100644
--- a/arch/arm/mach-mxc91231/Makefile
+++ b/arch/arm/mach-mxc91231/Makefile
@@ -1,2 +1,2 @@
-obj-y	:= mm.o clock.o devices.o system.o
+obj-y	:= mm.o clock.o devices.o system.o iomux.o
 obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o
diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c
new file mode 100644
index 00000000000..405d9b19d89
--- /dev/null
+++ b/arch/arm/mach-mxc91231/iomux.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mxc91231.h>
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_AP_BASE		MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR)
+#define IOMUX_COM_BASE		MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR)
+#define IOMUXSW_AP_MUX_CTL	(IOMUX_AP_BASE + 0x000)
+#define IOMUXSW_SP_MUX_CTL	(IOMUX_COM_BASE + 0x000)
+#define IOMUXSW_PAD_CTL		(IOMUX_COM_BASE + 0x200)
+
+#define IOMUXINT_OBS1		(IOMUX_AP_BASE + 0x600)
+#define IOMUXINT_OBS2		(IOMUX_AP_BASE + 0x004)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define NB_PORTS			((PIN_MAX + 32) / 32)
+#define PIN_GLOBAL_NUM(pin) \
+	(((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX +	\
+	 ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 +		\
+	 ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT))
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(const unsigned int pin_mode)
+{
+	u32 side, field, l, mode, ret = 0;
+	void __iomem *reg;
+
+	side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT;
+	switch (side) {
+	case MUX_SIDE_AP:
+		reg = IOMUXSW_AP_MUX_CTL;
+		break;
+	case MUX_SIDE_SP:
+		reg = IOMUXSW_SP_MUX_CTL;
+		break;
+	default:
+		return -EINVAL;
+	}
+	reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4;
+	field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT;
+	mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0xff << (field * 8));
+	l |= mode << (field * 8);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+	u32 padgrp, field, l;
+	void __iomem *reg;
+
+	padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT;
+	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
+	field = (pin + 2) % 3;
+
+	pr_debug("%s: reg offset = 0x%x, field = %d\n",
+			__func__, (pin + 2) / 3, field);
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0x1ff << (field * 10));
+	l |= config << (field * 10);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * allocs a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label)
+{
+	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
+	if (pad >= (PIN_MAX + 1)) {
+		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+			pad, label ? label : "?");
+		return -EINVAL;
+	}
+
+	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+			pad, label ? label : "?");
+		return -EBUSY;
+	}
+	mxc_iomux_mode(pin_mode);
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
+
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+		const char *label)
+{
+	unsigned int *p = pin_list;
+	int i;
+	int ret = -EINVAL;
+
+	for (i = 0; i < count; i++) {
+		ret = mxc_iomux_alloc_pin(*p, label);
+		if (ret)
+			goto setup_error;
+		p++;
+	}
+	return 0;
+
+setup_error:
+	mxc_iomux_release_multiple_pins(pin_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(const unsigned int pin_mode)
+{
+	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
+
+	if (pad < (PIN_MAX + 1))
+		clear_bit(pad, mxc_pin_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+{
+	unsigned int *p = pin_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		mxc_iomux_release_pin(*p);
+		p++;
+	}
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
index 8757573b0a8..7dbe4ca12ef 100644
--- a/arch/arm/mach-mxc91231/magx-zn5.c
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -14,6 +14,7 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
+#include <mach/iomux-mxc91231.h>
 #include <mach/mmc.h>
 #include <mach/imx-uart.h>
 
@@ -29,6 +30,9 @@ static void __init zn5_init(void)
 {
 	pm_power_off = mxc91231_power_off;
 
+	mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx");
+	mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx");
+
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
new file mode 100644
index 00000000000..9f13061192c
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __MACH_IOMUX_MXC91231_H__
+#define __MACH_IOMUX_MXC91231_H__
+
+/*
+ * various IOMUX output functions
+ */
+
+#define	IOMUX_OCONFIG_GPIO (0 << 4)	/* used as GPIO */
+#define	IOMUX_OCONFIG_FUNC (1 << 4)	/* used as function */
+#define	IOMUX_OCONFIG_ALT1 (2 << 4)	/* used as alternate function 1 */
+#define	IOMUX_OCONFIG_ALT2 (3 << 4)	/* used as alternate function 2 */
+#define	IOMUX_OCONFIG_ALT3 (4 << 4)	/* used as alternate function 3 */
+#define	IOMUX_OCONFIG_ALT4 (5 << 4)	/* used as alternate function 4 */
+#define	IOMUX_OCONFIG_ALT5 (6 << 4)	/* used as alternate function 5 */
+#define	IOMUX_OCONFIG_ALT6 (7 << 4)	/* used as alternate function 6 */
+#define	IOMUX_ICONFIG_NONE  0	 	/* not configured for input */
+#define	IOMUX_ICONFIG_GPIO  1		/* used as GPIO */
+#define	IOMUX_ICONFIG_FUNC  2		/* used as function */
+#define	IOMUX_ICONFIG_ALT1  4		/* used as alternate function 1 */
+#define	IOMUX_ICONFIG_ALT2  8		/* used as alternate function 2 */
+
+#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
+#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
+#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
+#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
+
+/*
+ * setups a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
+/*
+ * setups mutliple pins
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+		const char *label);
+
+/*
+ * releases a single pin:
+ * 	- make it available for a future use by another driver
+ * 	- frees the GPIO if the pin was configured as GPIO
+ * 	- DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_release_pin(const unsigned int pin_mode);
+/*
+ * releases multiple pins
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count);
+
+#define MUX_SIDE_AP		(0)
+#define MUX_SIDE_SP		(1)
+
+#define MUX_SIDE_SHIFT		(26)
+#define MUX_SIDE_MASK		(0x1 << MUX_SIDE_SHIFT)
+
+#define MUX_GPIO_PORT_SHIFT	(23)
+#define MUX_GPIO_PORT_MASK	(0x7 << MUX_GPIO_PORT_SHIFT)
+
+#define MUX_GPIO_PIN_SHIFT	(20)
+#define MUX_GPIO_PIN_MASK	(0x1f << MUX_GPIO_PIN_SHIFT)
+
+#define MUX_REG_SHIFT		(15)
+#define MUX_REG_MASK		(0x1f << MUX_REG_SHIFT)
+
+#define MUX_FIELD_SHIFT		(13)
+#define MUX_FIELD_MASK		(0x3 << MUX_FIELD_SHIFT)
+
+#define MUX_PADGRP_SHIFT	(8)
+#define MUX_PADGRP_MASK		(0x1f << MUX_PADGRP_SHIFT)
+
+#define MUX_PIN_MASK		(0xffffff << 8)
+
+#define GPIO_PORT_MAX		(3)
+
+#define IOMUX_PIN(side, gport, gpin, ctlreg, ctlfield, padgrp) \
+	(((side) << MUX_SIDE_SHIFT) |		  \
+	 (gport << MUX_GPIO_PORT_SHIFT) |		\
+	 ((gpin) << MUX_GPIO_PIN_SHIFT) |		\
+	 ((ctlreg) << MUX_REG_SHIFT) |		\
+	 ((ctlfield) << MUX_FIELD_SHIFT) |		\
+	 ((padgrp) << MUX_PADGRP_SHIFT))
+
+#define MUX_MODE_OUT_SHIFT	(4)
+#define MUX_MODE_IN_SHIFT	(0)
+#define MUX_MODE_SHIFT		(0)
+#define MUX_MODE_MASK		(0xff << MUX_MODE_SHIFT)
+
+#define IOMUX_MODE(pin, mode) \
+	(pin | (mode << MUX_MODE_SHIFT))
+
+enum iomux_pins {
+	/* AP Side pins */
+	MXC91231_PIN_AP_CLE		= IOMUX_PIN(0, 0,  0,  0, 0, 24),
+	MXC91231_PIN_AP_ALE		= IOMUX_PIN(0, 0,  1,  0, 1, 24),
+	MXC91231_PIN_AP_CE_B		= IOMUX_PIN(0, 0,  2,  0, 2, 24),
+	MXC91231_PIN_AP_RE_B		= IOMUX_PIN(0, 0,  3,  0, 3, 24),
+	MXC91231_PIN_AP_WE_B		= IOMUX_PIN(0, 0,  4,  1, 0, 24),
+	MXC91231_PIN_AP_WP_B		= IOMUX_PIN(0, 0,  5,  1, 1, 24),
+	MXC91231_PIN_AP_BSY_B		= IOMUX_PIN(0, 0,  6,  1, 2, 24),
+	MXC91231_PIN_AP_U1_TXD		= IOMUX_PIN(0, 0,  7,  1, 3, 28),
+	MXC91231_PIN_AP_U1_RXD		= IOMUX_PIN(0, 0,  8,  2, 0, 28),
+	MXC91231_PIN_AP_U1_RTS_B	= IOMUX_PIN(0, 0,  9,  2, 1, 28),
+	MXC91231_PIN_AP_U1_CTS_B	= IOMUX_PIN(0, 0, 10,  2, 2, 28),
+	MXC91231_PIN_AP_AD1_TXD		= IOMUX_PIN(0, 0, 11,  2, 3,  9),
+	MXC91231_PIN_AP_AD1_RXD		= IOMUX_PIN(0, 0, 12,  3, 0,  9),
+	MXC91231_PIN_AP_AD1_TXC		= IOMUX_PIN(0, 0, 13,  3, 1,  9),
+	MXC91231_PIN_AP_AD1_TXFS	= IOMUX_PIN(0, 0, 14,  3, 2,  9),
+	MXC91231_PIN_AP_AD2_TXD		= IOMUX_PIN(0, 0, 15,  3, 3,  9),
+	MXC91231_PIN_AP_AD2_RXD		= IOMUX_PIN(0, 0, 16,  4, 0,  9),
+	MXC91231_PIN_AP_AD2_TXC		= IOMUX_PIN(0, 0, 17,  4, 1,  9),
+	MXC91231_PIN_AP_AD2_TXFS	= IOMUX_PIN(0, 0, 18,  4, 2,  9),
+	MXC91231_PIN_AP_OWDAT		= IOMUX_PIN(0, 0, 19,  4, 3, 28),
+	MXC91231_PIN_AP_IPU_LD17	= IOMUX_PIN(0, 0, 20,  5, 0, 28),
+	MXC91231_PIN_AP_IPU_D3_VSYNC	= IOMUX_PIN(0, 0, 21,  5, 1, 28),
+	MXC91231_PIN_AP_IPU_D3_HSYNC	= IOMUX_PIN(0, 0, 22,  5, 2, 28),
+	MXC91231_PIN_AP_IPU_D3_CLK	= IOMUX_PIN(0, 0, 23,  5, 3, 28),
+	MXC91231_PIN_AP_IPU_D3_DRDY	= IOMUX_PIN(0, 0, 24,  6, 0, 28),
+	MXC91231_PIN_AP_IPU_D3_CONTR	= IOMUX_PIN(0, 0, 25,  6, 1, 28),
+	MXC91231_PIN_AP_IPU_D0_CS	= IOMUX_PIN(0, 0, 26,  6, 2, 28),
+	MXC91231_PIN_AP_IPU_LD16	= IOMUX_PIN(0, 0, 27,  6, 3, 28),
+	MXC91231_PIN_AP_IPU_D2_CS	= IOMUX_PIN(0, 0, 28,  7, 0, 28),
+	MXC91231_PIN_AP_IPU_PAR_RS	= IOMUX_PIN(0, 0, 29,  7, 1, 28),
+	MXC91231_PIN_AP_IPU_D3_PS	= IOMUX_PIN(0, 0, 30,  7, 2, 28),
+	MXC91231_PIN_AP_IPU_D3_CLS	= IOMUX_PIN(0, 0, 31,  7, 3, 28),
+	MXC91231_PIN_AP_IPU_RD		= IOMUX_PIN(0, 1,  0,  8, 0, 28),
+	MXC91231_PIN_AP_IPU_WR		= IOMUX_PIN(0, 1,  1,  8, 1, 28),
+	MXC91231_PIN_AP_IPU_LD0		= IOMUX_PIN(0, 7,  0,  8, 2, 28),
+	MXC91231_PIN_AP_IPU_LD1		= IOMUX_PIN(0, 7,  0,  8, 3, 28),
+	MXC91231_PIN_AP_IPU_LD2		= IOMUX_PIN(0, 7,  0,  9, 0, 28),
+	MXC91231_PIN_AP_IPU_LD3		= IOMUX_PIN(0, 1,  2,  9, 1, 28),
+	MXC91231_PIN_AP_IPU_LD4		= IOMUX_PIN(0, 1,  3,  9, 2, 28),
+	MXC91231_PIN_AP_IPU_LD5		= IOMUX_PIN(0, 1,  4,  9, 3, 28),
+	MXC91231_PIN_AP_IPU_LD6		= IOMUX_PIN(0, 1,  5, 10, 0, 28),
+	MXC91231_PIN_AP_IPU_LD7		= IOMUX_PIN(0, 1,  6, 10, 1, 28),
+	MXC91231_PIN_AP_IPU_LD8		= IOMUX_PIN(0, 1,  7, 10, 2, 28),
+	MXC91231_PIN_AP_IPU_LD9		= IOMUX_PIN(0, 1,  8, 10, 3, 28),
+	MXC91231_PIN_AP_IPU_LD10	= IOMUX_PIN(0, 1,  9, 11, 0, 28),
+	MXC91231_PIN_AP_IPU_LD11	= IOMUX_PIN(0, 1, 10, 11, 1, 28),
+	MXC91231_PIN_AP_IPU_LD12	= IOMUX_PIN(0, 1, 11, 11, 2, 28),
+	MXC91231_PIN_AP_IPU_LD13	= IOMUX_PIN(0, 1, 12, 11, 3, 28),
+	MXC91231_PIN_AP_IPU_LD14	= IOMUX_PIN(0, 1, 13, 12, 0, 28),
+	MXC91231_PIN_AP_IPU_LD15	= IOMUX_PIN(0, 1, 14, 12, 1, 28),
+	MXC91231_PIN_AP_KPROW4		= IOMUX_PIN(0, 7,  0, 12, 2, 10),
+	MXC91231_PIN_AP_KPROW5		= IOMUX_PIN(0, 1, 16, 12, 3, 10),
+	MXC91231_PIN_AP_GPIO_AP_B17	= IOMUX_PIN(0, 1, 17, 13, 0, 10),
+	MXC91231_PIN_AP_GPIO_AP_B18	= IOMUX_PIN(0, 1, 18, 13, 1, 10),
+	MXC91231_PIN_AP_KPCOL3		= IOMUX_PIN(0, 1, 19, 13, 2, 11),
+	MXC91231_PIN_AP_KPCOL4		= IOMUX_PIN(0, 1, 20, 13, 3, 11),
+	MXC91231_PIN_AP_KPCOL5		= IOMUX_PIN(0, 1, 21, 14, 0, 11),
+	MXC91231_PIN_AP_GPIO_AP_B22	= IOMUX_PIN(0, 1, 22, 14, 1, 11),
+	MXC91231_PIN_AP_GPIO_AP_B23	= IOMUX_PIN(0, 1, 23, 14, 2, 11),
+	MXC91231_PIN_AP_CSI_D0		= IOMUX_PIN(0, 1, 24, 14, 3, 21),
+	MXC91231_PIN_AP_CSI_D1		= IOMUX_PIN(0, 1, 25, 15, 0, 21),
+	MXC91231_PIN_AP_CSI_D2		= IOMUX_PIN(0, 1, 26, 15, 1, 21),
+	MXC91231_PIN_AP_CSI_D3		= IOMUX_PIN(0, 1, 27, 15, 2, 21),
+	MXC91231_PIN_AP_CSI_D4		= IOMUX_PIN(0, 1, 28, 15, 3, 21),
+	MXC91231_PIN_AP_CSI_D5		= IOMUX_PIN(0, 1, 29, 16, 0, 21),
+	MXC91231_PIN_AP_CSI_D6		= IOMUX_PIN(0, 1, 30, 16, 1, 21),
+	MXC91231_PIN_AP_CSI_D7		= IOMUX_PIN(0, 1, 31, 16, 2, 21),
+	MXC91231_PIN_AP_CSI_D8		= IOMUX_PIN(0, 2,  0, 16, 3, 21),
+	MXC91231_PIN_AP_CSI_D9		= IOMUX_PIN(0, 2,  1, 17, 0, 21),
+	MXC91231_PIN_AP_CSI_MCLK	= IOMUX_PIN(0, 2,  2, 17, 1, 21),
+	MXC91231_PIN_AP_CSI_VSYNC	= IOMUX_PIN(0, 2,  3, 17, 2, 21),
+	MXC91231_PIN_AP_CSI_HSYNC	= IOMUX_PIN(0, 2,  4, 17, 3, 21),
+	MXC91231_PIN_AP_CSI_PIXCLK	= IOMUX_PIN(0, 2,  5, 18, 0, 21),
+	MXC91231_PIN_AP_I2CLK		= IOMUX_PIN(0, 2,  6, 18, 1, 12),
+	MXC91231_PIN_AP_I2DAT		= IOMUX_PIN(0, 2,  7, 18, 2, 12),
+	MXC91231_PIN_AP_GPIO_AP_C8	= IOMUX_PIN(0, 2,  8, 18, 3,  9),
+	MXC91231_PIN_AP_GPIO_AP_C9	= IOMUX_PIN(0, 2,  9, 19, 0,  9),
+	MXC91231_PIN_AP_GPIO_AP_C10	= IOMUX_PIN(0, 2, 10, 19, 1,  9),
+	MXC91231_PIN_AP_GPIO_AP_C11	= IOMUX_PIN(0, 2, 11, 19, 2,  9),
+	MXC91231_PIN_AP_GPIO_AP_C12	= IOMUX_PIN(0, 2, 12, 19, 3,  9),
+	MXC91231_PIN_AP_GPIO_AP_C13	= IOMUX_PIN(0, 2, 13, 20, 0, 28),
+	MXC91231_PIN_AP_GPIO_AP_C14	= IOMUX_PIN(0, 2, 14, 20, 1, 28),
+	MXC91231_PIN_AP_GPIO_AP_C15	= IOMUX_PIN(0, 2, 15, 20, 2,  9),
+	MXC91231_PIN_AP_GPIO_AP_C16	= IOMUX_PIN(0, 2, 16, 20, 3,  9),
+	MXC91231_PIN_AP_GPIO_AP_C17	= IOMUX_PIN(0, 2, 17, 21, 0,  9),
+	MXC91231_PIN_AP_ED_INT0		= IOMUX_PIN(0, 2, 18, 21, 1, 22),
+	MXC91231_PIN_AP_ED_INT1		= IOMUX_PIN(0, 2, 19, 21, 2, 22),
+	MXC91231_PIN_AP_ED_INT2		= IOMUX_PIN(0, 2, 20, 21, 3, 22),
+	MXC91231_PIN_AP_ED_INT3		= IOMUX_PIN(0, 2, 21, 22, 0, 22),
+	MXC91231_PIN_AP_ED_INT4		= IOMUX_PIN(0, 2, 22, 22, 1, 23),
+	MXC91231_PIN_AP_ED_INT5		= IOMUX_PIN(0, 2, 23, 22, 2, 23),
+	MXC91231_PIN_AP_ED_INT6		= IOMUX_PIN(0, 2, 24, 22, 3, 23),
+	MXC91231_PIN_AP_ED_INT7		= IOMUX_PIN(0, 2, 25, 23, 0, 23),
+	MXC91231_PIN_AP_U2_DSR_B	= IOMUX_PIN(0, 2, 26, 23, 1, 28),
+	MXC91231_PIN_AP_U2_RI_B		= IOMUX_PIN(0, 2, 27, 23, 2, 28),
+	MXC91231_PIN_AP_U2_CTS_B	= IOMUX_PIN(0, 2, 28, 23, 3, 28),
+	MXC91231_PIN_AP_U2_DTR_B	= IOMUX_PIN(0, 2, 29, 24, 0, 28),
+	MXC91231_PIN_AP_KPROW0		= IOMUX_PIN(0, 7,  0, 24, 1, 10),
+	MXC91231_PIN_AP_KPROW1		= IOMUX_PIN(0, 1, 15, 24, 2, 10),
+	MXC91231_PIN_AP_KPROW2		= IOMUX_PIN(0, 7,  0, 24, 3, 10),
+	MXC91231_PIN_AP_KPROW3		= IOMUX_PIN(0, 7,  0, 25, 0, 10),
+	MXC91231_PIN_AP_KPCOL0		= IOMUX_PIN(0, 7,  0, 25, 1, 11),
+	MXC91231_PIN_AP_KPCOL1		= IOMUX_PIN(0, 7,  0, 25, 2, 11),
+	MXC91231_PIN_AP_KPCOL2		= IOMUX_PIN(0, 7,  0, 25, 3, 11),
+
+	/* Shared pins */
+	MXC91231_PIN_SP_U3_TXD		= IOMUX_PIN(1, 3,  0,  0, 0, 28),
+	MXC91231_PIN_SP_U3_RXD		= IOMUX_PIN(1, 3,  1,  0, 1, 28),
+	MXC91231_PIN_SP_U3_RTS_B	= IOMUX_PIN(1, 3,  2,  0, 2, 28),
+	MXC91231_PIN_SP_U3_CTS_B	= IOMUX_PIN(1, 3,  3,  0, 3, 28),
+	MXC91231_PIN_SP_USB_TXOE_B	= IOMUX_PIN(1, 3,  4,  1, 0, 28),
+	MXC91231_PIN_SP_USB_DAT_VP	= IOMUX_PIN(1, 3,  5,  1, 1, 28),
+	MXC91231_PIN_SP_USB_SE0_VM	= IOMUX_PIN(1, 3,  6,  1, 2, 28),
+	MXC91231_PIN_SP_USB_RXD		= IOMUX_PIN(1, 3,  7,  1, 3, 28),
+	MXC91231_PIN_SP_UH2_TXOE_B	= IOMUX_PIN(1, 3,  8,  2, 0, 28),
+	MXC91231_PIN_SP_UH2_SPEED	= IOMUX_PIN(1, 3,  9,  2, 1, 28),
+	MXC91231_PIN_SP_UH2_SUSPEN	= IOMUX_PIN(1, 3, 10,  2, 2, 28),
+	MXC91231_PIN_SP_UH2_TXDP	= IOMUX_PIN(1, 3, 11,  2, 3, 28),
+	MXC91231_PIN_SP_UH2_RXDP	= IOMUX_PIN(1, 3, 12,  3, 0, 28),
+	MXC91231_PIN_SP_UH2_RXDM	= IOMUX_PIN(1, 3, 13,  3, 1, 28),
+	MXC91231_PIN_SP_UH2_OVR		= IOMUX_PIN(1, 3, 14,  3, 2, 28),
+	MXC91231_PIN_SP_UH2_PWR		= IOMUX_PIN(1, 3, 15,  3, 3, 28),
+	MXC91231_PIN_SP_SD1_DAT0	= IOMUX_PIN(1, 3, 16,  4, 0, 25),
+	MXC91231_PIN_SP_SD1_DAT1	= IOMUX_PIN(1, 3, 17,  4, 1, 25),
+	MXC91231_PIN_SP_SD1_DAT2	= IOMUX_PIN(1, 3, 18,  4, 2, 25),
+	MXC91231_PIN_SP_SD1_DAT3	= IOMUX_PIN(1, 3, 19,  4, 3, 25),
+	MXC91231_PIN_SP_SD1_CMD		= IOMUX_PIN(1, 3, 20,  5, 0, 25),
+	MXC91231_PIN_SP_SD1_CLK		= IOMUX_PIN(1, 3, 21,  5, 1, 25),
+	MXC91231_PIN_SP_SD2_DAT0	= IOMUX_PIN(1, 3, 22,  5, 2, 26),
+	MXC91231_PIN_SP_SD2_DAT1	= IOMUX_PIN(1, 3, 23,  5, 3, 26),
+	MXC91231_PIN_SP_SD2_DAT2	= IOMUX_PIN(1, 3, 24,  6, 0, 26),
+	MXC91231_PIN_SP_SD2_DAT3	= IOMUX_PIN(1, 3, 25,  6, 1, 26),
+	MXC91231_PIN_SP_GPIO_SP_A26	= IOMUX_PIN(1, 3, 26,  6, 2, 28),
+	MXC91231_PIN_SP_SPI1_CLK	= IOMUX_PIN(1, 3, 27,  6, 3, 13),
+	MXC91231_PIN_SP_SPI1_MOSI	= IOMUX_PIN(1, 3, 28,  7, 0, 13),
+	MXC91231_PIN_SP_SPI1_MISO	= IOMUX_PIN(1, 3, 29,  7, 1, 13),
+	MXC91231_PIN_SP_SPI1_SS0	= IOMUX_PIN(1, 3, 30,  7, 2, 13),
+	MXC91231_PIN_SP_SPI1_SS1	= IOMUX_PIN(1, 3, 31,  7, 3, 13),
+	MXC91231_PIN_SP_SD2_CMD		= IOMUX_PIN(1, 7,  0,  8, 0, 26),
+	MXC91231_PIN_SP_SD2_CLK		= IOMUX_PIN(1, 7,  0,  8, 1, 26),
+	MXC91231_PIN_SP_SIM1_RST_B	= IOMUX_PIN(1, 2, 30,  8, 2, 28),
+	MXC91231_PIN_SP_SIM1_SVEN	= IOMUX_PIN(1, 7,  0,  8, 3, 28),
+	MXC91231_PIN_SP_SIM1_CLK	= IOMUX_PIN(1, 7,  0,  9, 0, 28),
+	MXC91231_PIN_SP_SIM1_TRXD	= IOMUX_PIN(1, 7,  0,  9, 1, 28),
+	MXC91231_PIN_SP_SIM1_PD		= IOMUX_PIN(1, 2, 31,  9, 2, 28),
+	MXC91231_PIN_SP_UH2_TXDM	= IOMUX_PIN(1, 7,  0,  9, 3, 28),
+	MXC91231_PIN_SP_UH2_RXD		= IOMUX_PIN(1, 7,  0, 10, 0, 28),
+};
+
+#define PIN_AP_MAX	(104)
+#define PIN_SP_MAX	(41)
+
+#define PIN_MAX		(PIN_AP_MAX + PIN_SP_MAX)
+
+/*
+ * Convenience values for use with mxc_iomux_mode()
+ *
+ * Format here is MXC91231_PIN_(pin name)__(function)
+ */
+
+#define MXC91231_PIN_SP_USB_DAT_VP__USB_DAT_VP \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_FUNC)
+#define MXC91231_PIN_SP_USB_SE0_VM__USB_SE0_VM \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_FUNC)
+#define MXC91231_PIN_SP_USB_DAT_VP__RXD2 \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_ALT1)
+#define MXC91231_PIN_SP_USB_SE0_VM__TXD2 \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_ALT1)
+
+
+#endif /* __MACH_IOMUX_MXC91231_H__ */
-- 
GitLab


From 89829d5fe31dc42825f2560c3c2c641709ed594e Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Mon, 10 Aug 2009 18:33:10 +0200
Subject: [PATCH 184/257] mx31: added one more pin definition

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index a3b206ce78b..67452732794 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -682,6 +682,7 @@ enum iomux_pins {
 #define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO1_0__GPIO1_0	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
-- 
GitLab


From b23f1534bb0e0dc97e46fc52bf9bde0c2226763c Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Mon, 10 Aug 2009 18:33:11 +0200
Subject: [PATCH 185/257] mx31moboard: added usb xcvr reset for mx31moboard

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard-devboard.c | 30 +++++++++++++-----------
 arch/arm/mach-mx3/mx31moboard-marxbot.c  | 28 ++++++++++++----------
 arch/arm/mach-mx3/mx31moboard.c          | 18 ++++++++++++++
 3 files changed, 49 insertions(+), 27 deletions(-)

diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 4704405165a..2f2f142f075 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -116,23 +116,25 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define OTG_EN_B 	IOMUX_TO_GPIO(MX31_PIN_USB_OC)
 
 static void devboard_usbotg_init(void)
 {
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
 
 	gpio_request(OTG_EN_B, "usb-udc-en");
 	gpio_direction_output(OTG_EN_B, 0);
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 641c3d6153a..b817a4a5bcb 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -120,23 +120,25 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
 #define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
 
 static void marxbot_usbotg_init(void)
 {
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
 
 	gpio_request(OTG_EN_B, "usb-udc-en");
 	gpio_direction_output(OTG_EN_B, 0);
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index b86b8a757c9..53ce60bdc82 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -16,6 +16,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -56,6 +57,8 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
 	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
 	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+	/* USB reset */
+	MX31_PIN_GPIO1_0__GPIO1_0,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -143,6 +146,19 @@ static struct imxmmc_platform_data sdhc1_pdata = {
 	.exit	= moboard_sdhc1_exit,
 };
 
+/*
+ * this pin is dedicated for all mx31moboard systems, so we do it here
+ */
+#define USB_RESET_B	IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
+
+static void usb_xcvr_reset(void)
+{
+	gpio_request(USB_RESET_B, "usb-reset");
+	gpio_direction_output(USB_RESET_B, 0);
+	mdelay(1);
+	gpio_set_value(USB_RESET_B, 1);
+}
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 };
@@ -168,6 +184,8 @@ static void __init mxc_board_init(void)
 
 	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
 
+	usb_xcvr_reset();
+
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
-- 
GitLab


From 88b05647171460b1d479371690876f8ac5957d42 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Mon, 10 Aug 2009 18:33:12 +0200
Subject: [PATCH 186/257] mx31moboard: move usb otg support back to moboard
 common file

since all boards finally have this device

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard-devboard.c | 45 ------------------------
 arch/arm/mach-mx3/mx31moboard-marxbot.c  | 45 ------------------------
 arch/arm/mach-mx3/mx31moboard.c          | 45 ++++++++++++++++++++++++
 3 files changed, 45 insertions(+), 90 deletions(-)

diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 2f2f142f075..b3e8f251ac7 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -40,18 +39,6 @@ static unsigned int devboard_pins[] = {
 	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
-	/* USB OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
-	MX31_PIN_USB_OC__GPIO1_30,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -111,35 +98,6 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= devboard_sdhc2_exit,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-#define OTG_EN_B 	IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void devboard_usbotg_init(void)
-{
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	gpio_request(OTG_EN_B, "usb-udc-en");
-	gpio_direction_output(OTG_EN_B, 0);
-}
-
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -153,7 +111,4 @@ void __init mx31moboard_devboard_init(void)
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
-
-	devboard_usbotg_init();
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index b817a4a5bcb..53ce7ff0637 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -48,18 +47,6 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	MX31_PIN_TXD2__GPIO1_28,
-	/* USB OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
-	MX31_PIN_USB_OC__GPIO1_30,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -115,35 +102,6 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= marxbot_sdhc2_exit,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void marxbot_usbotg_init(void)
-{
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	gpio_request(OTG_EN_B, "usb-udc-en");
-	gpio_direction_output(OTG_EN_B, 0);
-}
-
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -155,7 +113,4 @@ void __init mx31moboard_marxbot_init(void)
 		"marxbot");
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
-
-	marxbot_usbotg_init();
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 53ce60bdc82..2852bd58eda 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -59,6 +60,18 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
 	/* USB reset */
 	MX31_PIN_GPIO1_0__GPIO1_0,
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+	MX31_PIN_USB_OC__GPIO1_30,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -159,6 +172,35 @@ static void usb_xcvr_reset(void)
 	gpio_set_value(USB_RESET_B, 1);
 }
 
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void moboard_usbotg_init(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+}
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 };
@@ -186,6 +228,9 @@ static void __init mxc_board_init(void)
 
 	usb_xcvr_reset();
 
+	moboard_usbotg_init();
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
-- 
GitLab


From f420db843b7756e5d0d052b00472c94154f50c93 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Dec 2008 14:32:14 +0100
Subject: [PATCH 187/257] MX2: Add SPI devices/resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 68 +++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx2/devices.h |  4 +++
 2 files changed, 72 insertions(+)

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 4ecf0977beb..62810cbe4e3 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -39,6 +39,74 @@
 
 #include "devices.h"
 
+/*
+ * SPI master controller
+ *
+ * - i.MX1: 2 channel (slighly different register setting)
+ * - i.MX21: 2 channel
+ * - i.MX27: 3 channel
+ */
+static struct resource mxc_spi_resources0[] = {
+	{
+	       .start = CSPI1_BASE_ADDR,
+	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MXC_INT_CSPI1,
+	       .end = MXC_INT_CSPI1,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource mxc_spi_resources1[] = {
+	{
+		.start = CSPI2_BASE_ADDR,
+		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI2,
+		.end = MXC_INT_CSPI2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_spi_resources2[] = {
+	{
+		.start = CSPI3_BASE_ADDR,
+		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI3,
+		.end = MXC_INT_CSPI3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+#endif
+
+struct platform_device mxc_spi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
+	.resource = mxc_spi_resources0,
+};
+
+struct platform_device mxc_spi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
+	.resource = mxc_spi_resources1,
+};
+
+#ifdef CONFIG_MACH_MX27
+struct platform_device mxc_spi_device2 = {
+	.name = "spi_imx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
+	.resource = mxc_spi_resources2,
+};
+#endif
+
 /*
  * General Purpose Timer
  * - i.MX21: 3 timers
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 6e91b4e3509..d315406d672 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -23,3 +23,7 @@ extern struct platform_device mxc_otg_udc_device;
 extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+
-- 
GitLab


From d37ba97d49703be4e71f786cffcee4dfe73fa93c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Dec 2008 14:32:15 +0100
Subject: [PATCH 188/257] MX31: add spi controller devices/resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c | 61 +++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx3/devices.h |  3 ++
 2 files changed, 64 insertions(+)

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 4e728a29196..cde1b079242 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -455,6 +455,67 @@ struct platform_device mxc_usbh2 = {
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
 
+/*
+ * SPI master controller
+ * 3 channels
+ */
+static struct resource imx_spi_0_resources[] = {
+	{
+	       .start = CSPI1_BASE_ADDR,
+	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MXC_INT_CSPI1,
+	       .end = MXC_INT_CSPI1,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_spi_1_resources[] = {
+	{
+		.start = CSPI2_BASE_ADDR,
+		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI2,
+		.end = MXC_INT_CSPI2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_spi_2_resources[] = {
+	{
+		.start = CSPI3_BASE_ADDR,
+		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI3,
+		.end = MXC_INT_CSPI3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_spi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_spi_0_resources),
+	.resource = imx_spi_0_resources,
+};
+
+struct platform_device imx_spi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_spi_1_resources),
+	.resource = imx_spi_1_resources,
+};
+
+struct platform_device imx_spi_device2 = {
+	.name = "spi_imx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(imx_spi_2_resources),
+	.resource = imx_spi_2_resources,
+};
+
 #ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
 	{
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 81614319755..79f2be45d13 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -20,4 +20,7 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
+extern struct platform_device imx_spi_device0;
+extern struct platform_device imx_spi_device1;
+extern struct platform_device imx_spi_device2;
 
-- 
GitLab


From 547270a3b9f2deb9590b65e8fc351e5399ddf15d Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 17 Mar 2009 15:43:54 +0100
Subject: [PATCH 189/257] i.MX35 clock support: Add USB clocks

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock-imx35.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 1dbcdc07257..fe5c4217322 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -273,6 +273,19 @@ static unsigned long get_rate_csi(struct clk *clk)
 	return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
 }
 
+static unsigned long get_rate_otg(struct clk *clk)
+{
+	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+	unsigned long rate;
+
+	if (pdr4 & (1 << 9))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
+}
+
 static unsigned long get_rate_ipg_per(struct clk *clk)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
@@ -365,7 +378,7 @@ DEFINE_CLOCK(ssi2_clk,   1, CCM_CGR2, 14, get_rate_ssi, NULL);
 DEFINE_CLOCK(uart1_clk,  0, CCM_CGR2, 16, get_rate_uart, NULL);
 DEFINE_CLOCK(uart2_clk,  1, CCM_CGR2, 18, get_rate_uart, NULL);
 DEFINE_CLOCK(uart3_clk,  2, CCM_CGR2, 20, get_rate_uart, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
 DEFINE_CLOCK(wdog_clk,   0, CCM_CGR2, 24, NULL, NULL);
 DEFINE_CLOCK(max_clk,    0, CCM_CGR2, 26, NULL, NULL);
 DEFINE_CLOCK(admux_clk,  0, CCM_CGR2, 30, NULL, NULL);
@@ -426,7 +439,10 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK(NULL, "usbotg", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
 	_REGISTER_CLOCK(NULL, "admux", admux_clk)
-- 
GitLab


From 337316986f0531e1681c409de9b73af0bc6dc7bb Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 6 Aug 2009 11:19:39 +0200
Subject: [PATCH 190/257] mx27: add support for phytec pca100 (phyCARD-s) board

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Kconfig  |   7 ++
 arch/arm/mach-mx2/Makefile |   2 +
 arch/arm/mach-mx2/pca100.c | 244 +++++++++++++++++++++++++++++++++++++
 3 files changed, 253 insertions(+)
 create mode 100644 arch/arm/mach-mx2/pca100.c

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 0c28a37bc14..c8a2eac4d13 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -95,4 +95,11 @@ config MACH_MX27LITE
 	  Include support for MX27 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_PCA100
+	bool "Phytec phyCARD-s (pca100)"
+	depends on MACH_MX27
+	help
+	  Include support for phyCARD-s (aka pca100) platform. This
+	  includes specific configurations for the module and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 8b6846c4226..19560f04563 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -19,3 +19,5 @@ obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
+obj-$(CONFIG_MACH_PCA100) += pca100.o
+
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
new file mode 100644
index 00000000000..fe5b165b88c
--- /dev/null
+++ b/arch/arm/mach-mx2/pca100.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux.h>
+#include <mach/i2c.h>
+#include <asm/mach/time.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+#include <mach/irqs.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static int pca100_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* SDHC */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* onboard I2C */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* external I2C */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data pca100_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_w1_master_device,
+	&mxc_fec_device,
+};
+
+static struct imxi2c_platform_data pca100_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pca100_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4a),
+		.type = "lm75"
+	}
+};
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_eeprom at25320 = {
+	.name		= "at25320an",
+	.byte_len	= 4096,
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
+	{
+		.modalias = "at25",
+		.max_speed_hz = 30000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &at25320,
+	},
+};
+
+static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+
+static struct spi_imx_master pca100_spi_0_data = {
+	.chipselect	= pca100_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+};
+#endif
+
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOC(29), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "imx-mmc-detect", data);
+	if (ret)
+		printk(KERN_ERR
+			"pca100: Failed to reuest irq for sd/mmc detection\n");
+
+	return ret;
+}
+
+static void pca100_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOC(29), data);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.init = pca100_sdhc2_init,
+	.exit = pca100_sdhc2_exit,
+};
+
+static void __init pca100_init(void)
+{
+	int ret;
+
+	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
+			ARRAY_SIZE(pca100_pins), "PCA100");
+	if (ret)
+		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+
+	mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, pca100_i2c_devices,
+				ARRAY_SIZE(pca100_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
+
+	/* GPIO0_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
+	/* GPIO1_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
+	/* GPIO2_IRQ */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	spi_register_board_info(pca100_spi_board_info,
+				ARRAY_SIZE(pca100_spi_board_info));
+	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+#endif
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init pca100_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pca100_timer = {
+	.init = pca100_timer_init,
+};
+
+MACHINE_START(PCA100, "phyCARD-i.MX27")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = pca100_init,
+	.timer          = &pca100_timer,
+MACHINE_END
+
-- 
GitLab


From 7bc07ebc7d2e9ad57baf205840ce31e9243ed5e8 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 17 Apr 2009 16:52:25 +0200
Subject: [PATCH 191/257] mx3x: Fixup USB base addresses

The i.MX31 and the i.MX35 have different USB base addresses. Adjust
the resources accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c           | 20 ++++++++++++++------
 arch/arm/plat-mxc/include/mach/mx31.h |  2 +-
 arch/arm/plat-mxc/include/mach/mx35.h |  1 +
 3 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index cde1b079242..8a577f36725 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -366,8 +366,8 @@ struct platform_device mx3_camera = {
 
 static struct resource otg_resources[] = {
 	{
-		.start	= OTG_BASE_ADDR,
-		.end	= OTG_BASE_ADDR + 0x1ff,
+		.start	= MX31_OTG_BASE_ADDR,
+		.end	= MX31_OTG_BASE_ADDR + 0x1ff,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_USB3,
@@ -408,8 +408,8 @@ static u64 usbh1_dmamask = ~(u32)0;
 
 static struct resource mxc_usbh1_resources[] = {
 	{
-		.start = OTG_BASE_ADDR + 0x200,
-		.end = OTG_BASE_ADDR + 0x3ff,
+		.start = MX31_OTG_BASE_ADDR + 0x200,
+		.end = MX31_OTG_BASE_ADDR + 0x3ff,
 		.flags = IORESOURCE_MEM,
 	}, {
 		.start = MXC_INT_USB1,
@@ -434,8 +434,8 @@ static u64 usbh2_dmamask = ~(u32)0;
 
 static struct resource mxc_usbh2_resources[] = {
 	{
-		.start = OTG_BASE_ADDR + 0x400,
-		.end = OTG_BASE_ADDR + 0x5ff,
+		.start = MX31_OTG_BASE_ADDR + 0x400,
+		.end = MX31_OTG_BASE_ADDR + 0x5ff,
 		.flags = IORESOURCE_MEM,
 	}, {
 		.start = MXC_INT_USB2,
@@ -547,6 +547,14 @@ static int mx3_devices_init(void)
 	if (cpu_is_mx35()) {
 		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
 		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+		otg_resources[0].start = MX35_OTG_BASE_ADDR;
+		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
+		otg_resources[1].start = MXC_INT_USBOTG;
+		otg_resources[1].end = MXC_INT_USBOTG;
+		mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400;
+		mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
+		mxc_usbh1_resources[1].start = MXC_INT_USBHS;
+		mxc_usbh1_resources[1].end = MXC_INT_USBHS;
 	}
 
 	return 0;
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 0b06941b613..14ac0dcc82f 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -4,7 +4,7 @@
 #define MX31_IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
 #define MX31_IRAM_SIZE			SZ_16K
 
-#define OTG_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00088000)
+#define MX31_OTG_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00088000)
 #define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
 #define UART4_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B0000)
 #define UART5_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B4000)
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 6465fefb42e..ab4cfec6c8a 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -5,6 +5,7 @@
 #define MX35_IRAM_SIZE		SZ_128K
 
 #define MXC_FEC_BASE_ADDR	0x50038000
+#define MX35_OTG_BASE_ADDR	0x53ff4000
 #define MX35_NFC_BASE_ADDR	0xBB000000
 
 /*
-- 
GitLab


From 3fd2691a1dc80e42e6524bcbc228b1d35424d013 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 20 Mar 2009 19:25:01 +0100
Subject: [PATCH 192/257] MX31 Fix spi clock names

Fix the SPI clock names to match the device names.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 4742554e996..06bd6180bfc 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -525,9 +525,9 @@ DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
 
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
-	_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
-	_REGISTER_CLOCK(NULL, "cspi", cspi3_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
 	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
-- 
GitLab


From 0160651a65d091f9fb3b7955347e04c1125765f8 Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 18 Jun 2009 12:21:51 +0200
Subject: [PATCH 193/257] pcm038: mux configuration for predefined gpio line

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
---
 arch/arm/mach-mx2/pcm038.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 9a3483c8f58..ee65dda584c 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -216,6 +216,9 @@ static void __init pcm038_init(void)
 
 	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
 
+	/* PE18 for user-LED D40 */
+	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
-- 
GitLab


From 8d5c1ed3f639f6ae012332d8ccdff429f3f11823 Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 18 Jun 2009 14:15:22 +0200
Subject: [PATCH 194/257] pcm043: mux configuration for predefined gpio line

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
---
 arch/arm/mach-mx3/pcm043.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index e43276ea3b7..e18a224671f 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -202,7 +202,8 @@ static struct pad_desc pcm043_pads[] = {
 	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
 	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
 	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-	MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+	/* gpio */
+	MX35_PAD_ATA_CS0__GPIO2_6,
 };
 
 /*
-- 
GitLab


From e0fd4db372896d74e63097ee6463f97736440529 Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 18 Jun 2009 16:44:18 +0200
Subject: [PATCH 195/257] pcm037: mux configuration for predefined gpio line

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index b1b3282d15d..6cbaabedf38 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -170,6 +170,8 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CSI_MCLK__CSI_MCLK,
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
 	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	/* GPIO */
+	IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
 };
 
 static struct physmap_flash_data pcm037_flash_data = {
-- 
GitLab


From 4bd1527a64f847a8aaec4f6055d9498db2646626 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:18 +0200
Subject: [PATCH 196/257] mx31: define various GPIOs used on mx31moboard

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 67452732794..446f8676381 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -683,6 +683,17 @@ enum iomux_pins {
 #define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_0__GPIO1_0	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SVEN0__GPIO2_0		IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STX0__GPIO2_1		IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRX0__GPIO2_2		IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SIMPD0__GPIO2_3	IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DTR_DCE1__GPIO2_8	IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DSR_DCE1__GPIO2_9	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_RI_DCE1__GPIO2_10	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DCD_DCE1__GPIO2_11	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD5__GPIO1_21       IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRXD5__GPIO1_22       IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
+
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
-- 
GitLab


From 77aa561db19229a36859018277f41be88684b487 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:19 +0200
Subject: [PATCH 197/257] mx31moboard: support for the 4 leds used on
 mx31moboard

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard.c | 35 +++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 2852bd58eda..ac337d26409 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -21,6 +21,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/leds.h>
 #include <linux/memory.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
@@ -72,6 +73,9 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
 	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
 	MX31_PIN_USB_OC__GPIO1_30,
+	/* LEDs */
+	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
+	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -201,8 +205,39 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+static struct gpio_led mx31moboard_leds[] = {
+	{
+		.name 	= "coreboard-led-0:red:running",
+		.default_trigger = "heartbeat",
+		.gpio 	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+	}, {
+		.name	= "coreboard-led-1:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_STX0),
+	}, {
+		.name	= "coreboard-led-2:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SRX0),
+	}, {
+		.name	= "coreboard-led-3:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
+	},
+};
+
+static struct gpio_led_platform_data mx31moboard_led_pdata = {
+	.num_leds 	= ARRAY_SIZE(mx31moboard_leds),
+	.leds		= mx31moboard_leds,
+};
+
+static struct platform_device mx31moboard_leds_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &mx31moboard_led_pdata,
+	},
+};
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
+	&mx31moboard_leds_device,
 };
 
 static int mx31moboard_baseboard;
-- 
GitLab


From 8b1a540c245d68a77dbd909359cfc709b6a3a1bf Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:20 +0200
Subject: [PATCH 198/257] mx31moboard: initialize 4 input gpios for mx31moboard

These gpios are exported to userspace and are here to be used as
a selector

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index ac337d26409..d3c6bb26271 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -76,6 +76,9 @@ static unsigned int moboard_pins[] = {
 	/* LEDs */
 	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
 	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
+	/* SEL */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -235,6 +238,34 @@ static struct platform_device mx31moboard_leds_device = {
 	},
 };
 
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void mx31moboard_init_sel_gpios(void)
+{
+	if (!gpio_request(SEL0, "sel0")) {
+		gpio_direction_input(SEL0);
+		gpio_export(SEL0, true);
+	}
+
+	if (!gpio_request(SEL1, "sel1")) {
+		gpio_direction_input(SEL1);
+		gpio_export(SEL1, true);
+	}
+
+	if (!gpio_request(SEL2, "sel2")) {
+		gpio_direction_input(SEL2);
+		gpio_export(SEL2, true);
+	}
+
+	if (!gpio_request(SEL3, "sel3")) {
+		gpio_direction_input(SEL3);
+		gpio_export(SEL3, true);
+	}
+}
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 	&mx31moboard_leds_device,
@@ -256,6 +287,8 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_uart_device4, &uart_pdata);
 
+	mx31moboard_init_sel_gpios();
+
 	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
 	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
 
-- 
GitLab


From 2718c15c5fffa9d05e5076451ab4fc81caac313f Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:21 +0200
Subject: [PATCH 199/257] mx31moboard: two GPIOS are used to reset other
 microcontrolers on the robot

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard-marxbot.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 53ce7ff0637..3e2b73051b9 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -47,6 +47,8 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	MX31_PIN_TXD2__GPIO1_28,
+	/* dsPIC resets */
+	MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -102,6 +104,22 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= marxbot_sdhc2_exit,
 };
 
+#define TRSLAT_RST_B	IOMUX_TO_GPIO(MX31_PIN_STXD5)
+#define DSPICS_RST_B	IOMUX_TO_GPIO(MX31_PIN_SRXD5)
+
+static void dspics_resets_init(void)
+{
+	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+		gpio_direction_output(TRSLAT_RST_B, 1);
+		gpio_export(TRSLAT_RST_B, false);
+	}
+
+	if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
+		gpio_direction_output(DSPICS_RST_B, 1);
+		gpio_export(DSPICS_RST_B, false);
+	}
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -112,5 +130,7 @@ void __init mx31moboard_marxbot_init(void)
 	mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
 		"marxbot");
 
+	dspics_resets_init();
+
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
 }
-- 
GitLab


From f6d2fa7dcbd438da4d150f695ebd219419a325ce Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 13 Aug 2009 10:02:30 +0200
Subject: [PATCH 200/257] MX21: Compilation fix for devices.c

The OTG devices are only available on i.MX27, so ifdef
them out for i.MX21.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 62810cbe4e3..50199aff014 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -437,6 +437,7 @@ struct platform_device mxc_sdhc_device1 = {
        .resource       = mxc_sdhc2_resources,
 };
 
+#ifdef CONFIG_MACH_MX27
 static struct resource otg_resources[] = {
 	{
 		.start	= OTG_BASE_ADDR,
@@ -527,7 +528,7 @@ struct platform_device mxc_usbh2 = {
 	.resource = mxc_usbh2_resources,
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
-
+#endif
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-- 
GitLab


From c35d3a418149f145ff0d90833db3e298e88de1ad Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 13 Aug 2009 10:04:44 +0200
Subject: [PATCH 201/257] mx21ads: Fix framebuffer platform data

struct imx_fb_platform_data has changed and the mx21ads was
forgotten to change. Fix it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/mx21ads.c | 44 ++++++++++++++++++++++---------------
 1 file changed, 26 insertions(+), 18 deletions(-)

diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
index a525783ceea..cf5f77cbc2f 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -164,25 +164,33 @@ static void mx21ads_fb_exit(struct platform_device *pdev)
  * Connected is a portrait Sharp-QVGA display
  * of type: LQ035Q7DB02
  */
+static struct imx_fb_videomode mx21ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 2,
+			.left_margin	= 6,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 8,
+			.lower_margin	= 10,
+		},
+		.pcr		= 0xfb108bc7,
+		.bpp		= 16,
+	},
+};
+
 static struct imx_fb_platform_data mx21ads_fb_data = {
-	.pixclock       = 188679, /* in ps */
-	.xres           = 240,
-	.yres           = 320,
-
-	.bpp            = 16,
-	.hsync_len      = 2,
-	.left_margin    = 6,
-	.right_margin   = 16,
-
-	.vsync_len      = 1,
-	.upper_margin   = 8,
-	.lower_margin   = 10,
-	.fixed_screen_cpu = 0,
-
-	.pcr            = 0xFB108BC7,
-	.pwmr           = 0x00A901ff,
-	.lscr1          = 0x00120300,
-	.dmacr          = 0x00020008,
+	.mode = mx21ads_modes,
+	.num_modes = ARRAY_SIZE(mx21ads_modes),
+
+	.pwmr		= 0x00a903ff,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020008,
 
 	.init = mx21ads_fb_init,
 	.exit = mx21ads_fb_exit,
-- 
GitLab


From 369842658a36bcea28ecb643ba4bdb53919330dd Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Sat, 15 Aug 2009 12:58:11 +0100
Subject: [PATCH 202/257] ARM: 5677/1: ARM support for
 TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait

This patch adds support for TIF_RESTORE_SIGMASK to ARM's
signal handling, which allows to hook up the pselect6, ppoll,
and epoll_pwait syscalls on ARM.

Tested here with eabi userspace and a test program with a
deliberate race between a child's exit and the parent's
sigprocmask/select sequence. Using sys_pselect6() instead
of sigprocmask/select reliably prevents the race.

The other arch's support for TIF_RESTORE_SIGMASK has evolved
over time:

In 2.6.16:
- add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING
- test both when checking for pending signal [changed later]
- reimplement sys_sigsuspend() to use current->saved_sigmask,
  TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND;
  ditto for sys_rt_sigsuspend(), but drop private code and
  use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND;
- there are now no "extra" calls to do_signal() so its oldset
  parameter is always &current->blocked so need not be passed,
  also its return value is changed to void
- change handle_signal() to return 0/-errno
- change do_signal() to honor TIF_RESTORE_SIGMASK:
  + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK
    is set
  + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK
  + if no signal was delivered and TIF_RESTORE_SIGMASK is set then
    clear it and restore the sigmask
- hook up sys_pselect6() and sys_ppoll()

In 2.6.19:
- hook up sys_epoll_pwait()

In 2.6.26:
- allow archs to override how TIF_RESTORE_SIGMASK is implemented;
  default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and
  TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again
  when checking for pending signal work; some archs now implement
  TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit
- call set_restore_sigmask() in sys_sigsuspend() instead of setting
  TIF_RESTORE_SIGMASK

In 2.6.29-rc:
- kill sys_pselect7() which no arch wanted

So for 2.6.31-rc6/ARM this patch does the following:
- Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask()
  which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so
  TIF_RESTORE_SIGMASK need not claim one of the scarce low thread
  flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need
  not be extended for TIF_RESTORE_SIGMASK.
- sys_sigsuspend() is reimplemented to use current->saved_sigmask
  and set_restore_sigmask(), making it identical to most other archs
- The private code for sys_rt_sigsuspend() is removed, instead
  generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND.
- sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs
  parameter, so their assembly code wrappers are removed.
- handle_signal() is changed to return 0 on success or -errno.
- The oldset parameter to do_signal() is now redundant and removed,
  and the return value is now also redundant and changed to void.
- do_signal() is changed to honor TIF_RESTORE_SIGMASK:
  + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK
    is set
  + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK
  + if no signal was delivered and TIF_RESTORE_SIGMASK is set then
    clear it and restore the sigmask
- Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/thread_info.h |  2 +
 arch/arm/include/asm/unistd.h      |  7 +--
 arch/arm/kernel/calls.S            | 10 ++--
 arch/arm/kernel/entry-common.S     | 10 ----
 arch/arm/kernel/signal.c           | 86 +++++++++++++-----------------
 5 files changed, 48 insertions(+), 67 deletions(-)

diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 73394e50cbc..e20d80539b4 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -140,6 +140,7 @@ extern void vfp_sync_state(struct thread_info *thread);
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18
 #define TIF_FREEZE		19
+#define TIF_RESTORE_SIGMASK	20
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
@@ -147,6 +148,7 @@ extern void vfp_sync_state(struct thread_info *thread);
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 
 /*
  * Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 0e97b8cb77d..9122c9ee18f 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -360,8 +360,8 @@
 #define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
 #define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
 #define __NR_faccessat			(__NR_SYSCALL_BASE+334)
-					/* 335 for pselect6 */
-					/* 336 for ppoll */
+#define __NR_pselect6			(__NR_SYSCALL_BASE+335)
+#define __NR_ppoll			(__NR_SYSCALL_BASE+336)
 #define __NR_unshare			(__NR_SYSCALL_BASE+337)
 #define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
 #define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
@@ -372,7 +372,7 @@
 #define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
 #define __NR_move_pages			(__NR_SYSCALL_BASE+344)
 #define __NR_getcpu			(__NR_SYSCALL_BASE+345)
-					/* 346 for epoll_pwait */
+#define __NR_epoll_pwait		(__NR_SYSCALL_BASE+346)
 #define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
 #define __NR_utimensat			(__NR_SYSCALL_BASE+348)
 #define __NR_signalfd			(__NR_SYSCALL_BASE+349)
@@ -432,6 +432,7 @@
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 #if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
 #define __ARCH_WANT_SYS_TIME
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index f776e72a4cb..ecfa98954d1 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -81,7 +81,7 @@
 		CALL(sys_ni_syscall)		/* was sys_ssetmask */
 /* 70 */	CALL(sys_setreuid16)
 		CALL(sys_setregid16)
-		CALL(sys_sigsuspend_wrapper)
+		CALL(sys_sigsuspend)
 		CALL(sys_sigpending)
 		CALL(sys_sethostname)
 /* 75 */	CALL(sys_setrlimit)
@@ -188,7 +188,7 @@
 		CALL(sys_rt_sigpending)
 		CALL(sys_rt_sigtimedwait)
 		CALL(sys_rt_sigqueueinfo)
-		CALL(sys_rt_sigsuspend_wrapper)
+		CALL(sys_rt_sigsuspend)
 /* 180 */	CALL(ABI(sys_pread64, sys_oabi_pread64))
 		CALL(ABI(sys_pwrite64, sys_oabi_pwrite64))
 		CALL(sys_chown16)
@@ -344,8 +344,8 @@
 		CALL(sys_readlinkat)
 		CALL(sys_fchmodat)
 		CALL(sys_faccessat)
-/* 335 */	CALL(sys_ni_syscall)		/* eventually pselect6 */
-		CALL(sys_ni_syscall)		/* eventually ppoll */
+/* 335 */	CALL(sys_pselect6)
+		CALL(sys_ppoll)
 		CALL(sys_unshare)
 		CALL(sys_set_robust_list)
 		CALL(sys_get_robust_list)
@@ -355,7 +355,7 @@
 		CALL(sys_vmsplice)
 		CALL(sys_move_pages)
 /* 345 */	CALL(sys_getcpu)
-		CALL(sys_ni_syscall)		/* eventually epoll_pwait */
+		CALL(sys_epoll_pwait)
 		CALL(sys_kexec_load)
 		CALL(sys_utimensat)
 		CALL(sys_signalfd)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41..bfa7f0af7ed 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -373,16 +373,6 @@ sys_clone_wrapper:
 		b	sys_clone
 ENDPROC(sys_clone_wrapper)
 
-sys_sigsuspend_wrapper:
-		add	r3, sp, #S_OFF
-		b	sys_sigsuspend
-ENDPROC(sys_sigsuspend_wrapper)
-
-sys_rt_sigsuspend_wrapper:
-		add	r2, sp, #S_OFF
-		b	sys_rt_sigsuspend
-ENDPROC(sys_rt_sigsuspend_wrapper)
-
 sys_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
 		b	sys_sigreturn
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 93bb4247b7e..e27ee1f701d 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -47,57 +47,22 @@ const unsigned long sigreturn_codes[7] = {
 	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
 };
 
-static int do_signal(sigset_t *oldset, struct pt_regs * regs, int syscall);
-
 /*
  * atomically swap in the new signal mask, and wait for a signal.
  */
-asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask, struct pt_regs *regs)
+asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
 {
-	sigset_t saveset;
-
 	mask &= _BLOCKABLE;
 	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
+	current->saved_sigmask = current->blocked;
 	siginitset(&current->blocked, mask);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
-	regs->ARM_r0 = -EINTR;
-
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&saveset, regs, 0))
-			return regs->ARM_r0;
-	}
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's. */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	regs->ARM_r0 = -EINTR;
 
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&saveset, regs, 0))
-			return regs->ARM_r0;
-	}
+	current->state = TASK_INTERRUPTIBLE;
+	schedule();
+	set_restore_sigmask();
+	return -ERESTARTNOHAND;
 }
 
 asmlinkage int 
@@ -545,7 +510,7 @@ static inline void setup_syscall_restart(struct pt_regs *regs)
 /*
  * OK, we're invoking a handler
  */	
-static void
+static int
 handle_signal(unsigned long sig, struct k_sigaction *ka,
 	      siginfo_t *info, sigset_t *oldset,
 	      struct pt_regs * regs, int syscall)
@@ -596,7 +561,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 
 	if (ret != 0) {
 		force_sigsegv(sig, tsk);
-		return;
+		return ret;
 	}
 
 	/*
@@ -610,6 +575,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	recalc_sigpending();
 	spin_unlock_irq(&tsk->sighand->siglock);
 
+	return 0;
 }
 
 /*
@@ -621,7 +587,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
  * the kernel can handle, and then we build all the user-level signal handling
  * stack-frames in one go after that.
  */
-static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
+static void do_signal(struct pt_regs *regs, int syscall)
 {
 	struct k_sigaction ka;
 	siginfo_t info;
@@ -634,7 +600,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 	 * if so.
 	 */
 	if (!user_mode(regs))
-		return 0;
+		return;
 
 	if (try_to_freeze())
 		goto no_signal;
@@ -643,9 +609,24 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		handle_signal(signr, &ka, &info, oldset, regs, syscall);
+		sigset_t *oldset;
+
+		if (test_thread_flag(TIF_RESTORE_SIGMASK))
+			oldset = &current->saved_sigmask;
+		else
+			oldset = &current->blocked;
+		if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
+			/*
+			 * A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TIF_RESTORE_SIGMASK flag.
+			 */
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+		}
 		single_step_set(current);
-		return 1;
+		return;
 	}
 
  no_signal:
@@ -697,14 +678,21 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 		    regs->ARM_r0 == -ERESTARTNOINTR) {
 			setup_syscall_restart(regs);
 		}
+
+		/* If there's no signal to deliver, we just put the saved sigmask
+		 * back.
+		 */
+		if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+			clear_thread_flag(TIF_RESTORE_SIGMASK);
+			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+		}
 	}
 	single_step_set(current);
-	return 0;
 }
 
 asmlinkage void
 do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 {
 	if (thread_flags & _TIF_SIGPENDING)
-		do_signal(&current->blocked, regs, syscall);
+		do_signal(regs, syscall);
 }
-- 
GitLab


From 58b5369e6eb6c889b540a99aa95562a66b25acf1 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 14 Aug 2009 15:36:44 +0100
Subject: [PATCH 203/257] ARM: 5674/1: Add clocksource/clockevent support for
 w90p910 platform

Add clocksource/clockevent support for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                |   2 +
 arch/arm/mach-w90x900/clock.c   |   6 ++
 arch/arm/mach-w90x900/time.c    | 151 +++++++++++++++++++++++++++-----
 arch/arm/mach-w90x900/w90p910.c |   2 +
 4 files changed, 137 insertions(+), 24 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c3fed1ee730..8c4f03d3412 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -495,6 +495,8 @@ config ARCH_W90X900
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	help
 		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
 		can login www.mcuos.com or www.nuvoton.com to know more.
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index 49cf1fbc14e..70b67109637 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -55,6 +55,12 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return 15000000;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
 void w90x900_clk_enable(struct clk *clk, int enable)
 {
 	unsigned int clocks = clk->cken;
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index bcc838f6b39..5e06770e601 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -3,7 +3,7 @@
  *
  * Based on linux/arch/arm/plat-s3c24xx/time.c by Ben Dooks
  *
- * Copyright (c) 2008 Nuvoton technology corporation
+ * Copyright (c) 2009 Nuvoton technology corporation
  * All rights reserved.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
@@ -23,6 +23,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/leds.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/irq.h>
@@ -31,49 +33,150 @@
 #include <mach/map.h>
 #include <mach/regs-timer.h>
 
-static unsigned long w90x900_gettimeoffset(void)
+#define RESETINT	0x1f
+#define PERIOD		(0x01 << 27)
+#define ONESHOT		(0x00 << 27)
+#define COUNTEN		(0x01 << 30)
+#define INTEN		(0x01 << 29)
+
+#define TICKS_PER_SEC	100
+#define PRESCALE	0x63 /* Divider = prescale + 1 */
+
+unsigned int timer0_load;
+
+static void w90p910_clockevent_setmode(enum clock_event_mode mode,
+		struct clock_event_device *clk)
 {
+	unsigned int val;
+
+	val = __raw_readl(REG_TCSR0);
+	val &= ~(0x03 << 27);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		__raw_writel(timer0_load, REG_TICR0);
+		val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+
+	__raw_writel(val, REG_TCSR0);
+}
+
+static int w90p910_clockevent_setnextevent(unsigned long evt,
+		struct clock_event_device *clk)
+{
+	unsigned int val;
+
+	__raw_writel(evt, REG_TICR0);
+
+	val = __raw_readl(REG_TCSR0);
+	val |= (COUNTEN | INTEN | PRESCALE);
+	__raw_writel(val, REG_TCSR0);
+
 	return 0;
 }
 
+static struct clock_event_device w90p910_clockevent_device = {
+	.name		= "w90p910-timer0",
+	.shift		= 32,
+	.features	= CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= w90p910_clockevent_setmode,
+	.set_next_event	= w90p910_clockevent_setnextevent,
+	.rating		= 300,
+};
+
 /*IRQ handler for the timer*/
 
-static irqreturn_t
-w90x900_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t w90p910_timer0_interrupt(int irq, void *dev_id)
 {
-	timer_tick();
+	struct clock_event_device *evt = &w90p910_clockevent_device;
+
 	__raw_writel(0x01, REG_TISR); /* clear TIF0 */
+
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
-static struct irqaction w90x900_timer_irq = {
-	.name		= "w90x900 Timer Tick",
+static struct irqaction w90p910_timer0_irq = {
+	.name		= "w90p910-timer0",
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= w90x900_timer_interrupt,
+	.handler	= w90p910_timer0_interrupt,
 };
 
-/*Set up timer reg.*/
+static void __init w90p910_clockevents_init(unsigned int rate)
+{
+	w90p910_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
+					w90p910_clockevent_device.shift);
+	w90p910_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
+					&w90p910_clockevent_device);
+	w90p910_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
+					&w90p910_clockevent_device);
+	w90p910_clockevent_device.cpumask = cpumask_of(0);
 
-static void w90x900_timer_setup(void)
+	clockevents_register_device(&w90p910_clockevent_device);
+}
+
+static cycle_t w90p910_get_cycles(struct clocksource *cs)
 {
-	__raw_writel(0, REG_TCSR0);
-	__raw_writel(0, REG_TCSR1);
-	__raw_writel(0, REG_TCSR2);
-	__raw_writel(0, REG_TCSR3);
-	__raw_writel(0, REG_TCSR4);
-	__raw_writel(0x1F, REG_TISR);
-	__raw_writel(15000000/(100 * 100), REG_TICR0);
-	__raw_writel(0x68000063, REG_TCSR0);
+	return ~__raw_readl(REG_TDR1);
 }
 
-static void __init w90x900_timer_init(void)
+static struct clocksource clocksource_w90p910 = {
+	.name	= "w90p910-timer1",
+	.rating	= 200,
+	.read	= w90p910_get_cycles,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.shift	= 20,
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init w90p910_clocksource_init(unsigned int rate)
 {
-	w90x900_timer_setup();
-	setup_irq(IRQ_TIMER0, &w90x900_timer_irq);
+	unsigned int val;
+
+	__raw_writel(0xffffffff, REG_TICR1);
+
+	val = __raw_readl(REG_TCSR1);
+	val |= (COUNTEN | PERIOD);
+	__raw_writel(val, REG_TCSR1);
+
+	clocksource_w90p910.mult =
+		clocksource_khz2mult((rate / 1000), clocksource_w90p910.shift);
+	clocksource_register(&clocksource_w90p910);
+}
+
+static void __init w90p910_timer_init(void)
+{
+	struct clk *ck_ext = clk_get(NULL, "ext");
+	unsigned int	rate;
+
+	BUG_ON(IS_ERR(ck_ext));
+
+	rate = clk_get_rate(ck_ext);
+	clk_put(ck_ext);
+	rate = rate / (PRESCALE + 0x01);
+
+	 /* set a known state */
+	__raw_writel(0x00, REG_TCSR0);
+	__raw_writel(0x00, REG_TCSR1);
+	__raw_writel(RESETINT, REG_TISR);
+	timer0_load = (rate / TICKS_PER_SEC);
+
+	setup_irq(IRQ_TIMER0, &w90p910_timer0_irq);
+
+	w90p910_clocksource_init(rate);
+	w90p910_clockevents_init(rate);
 }
 
 struct sys_timer w90x900_timer = {
-	.init		= w90x900_timer_init,
-	.offset		= w90x900_gettimeoffset,
-	.resume		= w90x900_timer_setup
+	.init		= w90p910_timer_init,
 };
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 8444eababaa..d33723b69d1 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -76,6 +76,7 @@ static DEFINE_CLK(wdt, 26);
 static DEFINE_CLK(gdma, 27);
 static DEFINE_CLK(adc, 28);
 static DEFINE_CLK(usi, 29);
+static DEFINE_CLK(ext, 0);
 
 static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
@@ -97,6 +98,7 @@ static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
 	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
 	DEF_CLKLOOK(&clk_usi, "w90p910-spi", NULL),
+	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
 };
 
 /* Initial serial platform data */
-- 
GitLab


From f346becf2fdba4d9dc023d28bc9a28f74dc9e4ac Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 14 Aug 2009 15:37:42 +0100
Subject: [PATCH 204/257] ARM: 5675/1: The semaphore is used as mutex so make
 it a mutex
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The semaphore is used as mutex so make it a mutex.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mfp-w90p910.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
index e11a32b6856..4533098a0ee 100644
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -40,7 +40,7 @@
 #define ENI2C0		(0x01 << 14)
 #define ENI2C1		(0x01 << 16)
 
-static DECLARE_MUTEX(mfp_sem);
+static DEFINE_MUTEX(mfp_mutex);
 
 void mfp_set_groupf(struct device *dev)
 {
@@ -49,7 +49,7 @@ void mfp_set_groupf(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -62,7 +62,7 @@ void mfp_set_groupf(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupf);
 
@@ -73,7 +73,7 @@ void mfp_set_groupc(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -92,7 +92,7 @@ void mfp_set_groupc(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupc);
 
@@ -103,7 +103,7 @@ void mfp_set_groupi(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -120,7 +120,7 @@ void mfp_set_groupi(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupi);
 
@@ -131,7 +131,7 @@ void mfp_set_groupg(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -152,7 +152,7 @@ void mfp_set_groupg(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupg);
 
-- 
GitLab


From a8bc4eadd936bbad9e99b89fe692679451ad75c9 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 14 Aug 2009 15:38:29 +0100
Subject: [PATCH 205/257] ARM: 5676/1: Provide more useful introduction for
 w90x900

Provide more useful introduction for w90x900

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8c4f03d3412..aad0add99a5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -498,8 +498,13 @@ config ARCH_W90X900
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
-		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-		can login www.mcuos.com or www.nuvoton.com to know more.
+	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
+	  At present, the w90x900 has been renamed nuc900, regarding
+	  the ARM series product line, you can login the following
+	  link address to know more.
+
+	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
+		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
-- 
GitLab


From 4663712cc745324a216112a72c744bb2b8f6658b Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:56:19 +0100
Subject: [PATCH 206/257] ARM: 5643/1: bcmring: arch.c and header files

add arch.c in mach-bcmring
add related header files in mach-bcmring

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/arch.c                  | 157 ++++++++++++++++++
 arch/arm/mach-bcmring/core.h                  |  30 ++++
 arch/arm/mach-bcmring/include/cfg_global.h    |  13 ++
 .../mach-bcmring/include/cfg_global_defines.h |  40 +++++
 arch/arm/mach-bcmring/include/mach/hardware.h |  60 +++++++
 arch/arm/mach-bcmring/include/mach/system.h   |  54 ++++++
 6 files changed, 354 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/arch.c
 create mode 100644 arch/arm/mach-bcmring/core.h
 create mode 100644 arch/arm/mach-bcmring/include/cfg_global.h
 create mode 100644 arch/arm/mach-bcmring/include/cfg_global_defines.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/hardware.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/system.h

diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
new file mode 100644
index 00000000000..0da693b0f7e
--- /dev/null
+++ b/arch/arm/mach-bcmring/arch.c
@@ -0,0 +1,157 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+#include <linux/proc_fs.h>
+#include <linux/sysctl.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <cfg_global.h>
+
+#include "core.h"
+
+HW_DECLARE_SPINLOCK(arch)
+HW_DECLARE_SPINLOCK(gpio)
+#if defined(CONFIG_DEBUG_SPINLOCK)
+    EXPORT_SYMBOL(bcmring_gpio_reg_lock);
+#endif
+
+/* FIXME: temporary solution */
+#define BCM_SYSCTL_REBOOT_WARM               1
+#define CTL_BCM_REBOOT                 112
+
+/* sysctl */
+int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
+
+static struct ctl_table_header *bcmring_sysctl_header;
+
+static struct ctl_table bcmring_sysctl_warm_reboot[] = {
+	{
+	 .ctl_name = BCM_SYSCTL_REBOOT_WARM,
+	 .procname = "warm",
+	 .data = &bcmring_arch_warm_reboot,
+	 .maxlen = sizeof(int),
+	 .mode = 0644,
+	 .proc_handler = &proc_dointvec},
+	{}
+};
+
+static struct ctl_table bcmring_sysctl_reboot[] = {
+	{
+	 .ctl_name = CTL_BCM_REBOOT,
+	 .procname = "reboot",
+	 .mode = 0555,
+	 .child = bcmring_sysctl_warm_reboot},
+	{}
+};
+
+static struct platform_device nand_device = {
+	.name = "bcm-nand",
+	.id = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&nand_device,
+};
+
+/****************************************************************************
+*
+*   Called from the customize_machine function in arch/arm/kernel/setup.c
+*
+*   The customize_machine function is tagged as an arch_initcall
+*   (see include/linux/init.h for the order that the various init sections
+*   are called in.
+*
+*****************************************************************************/
+static void __init bcmring_init_machine(void)
+{
+
+	bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot);
+
+	/* Enable spread spectrum */
+	chipcHw_enableSpreadSpectrum();
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	bcmring_amba_init();
+
+	dma_init();
+}
+
+/****************************************************************************
+*
+*   Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags
+*   passed in by the boot loader.
+*
+*****************************************************************************/
+
+static void __init bcmring_fixup(struct machine_desc *desc,
+     struct tag *t, char **cmdline, struct meminfo *mi) {
+#ifdef CONFIG_BLK_DEV_INITRD
+	printk(KERN_NOTICE "bcmring_fixup\n");
+	t->hdr.tag = ATAG_CORE;
+	t->hdr.size = tag_size(tag_core);
+	t->u.core.flags = 0;
+	t->u.core.pagesize = PAGE_SIZE;
+	t->u.core.rootdev = 31 << 8 | 0;
+	t = tag_next(t);
+
+	t->hdr.tag = ATAG_MEM;
+	t->hdr.size = tag_size(tag_mem32);
+	t->u.mem.start = CFG_GLOBAL_RAM_BASE;
+	t->u.mem.size = CFG_GLOBAL_RAM_SIZE;
+
+	t = tag_next(t);
+
+	t->hdr.tag = ATAG_NONE;
+	t->hdr.size = 0;
+#endif
+}
+
+/****************************************************************************
+*
+*   Machine Description
+*
+*****************************************************************************/
+
+MACHINE_START(BCMRING, "BCMRING")
+	/* Maintainer: Broadcom Corporation */
+	.phys_io = MM_IO_START,
+	.io_pg_offst = (MM_IO_BASE >> 18) & 0xfffc,
+	.fixup = bcmring_fixup,
+	.map_io = bcmring_map_io,
+	.init_irq = bcmring_init_irq,
+	.timer = &bcmring_timer,
+	.init_machine = bcmring_init_machine
+MACHINE_END
diff --git a/arch/arm/mach-bcmring/core.h b/arch/arm/mach-bcmring/core.h
new file mode 100644
index 00000000000..b197ba48e36
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.h
@@ -0,0 +1,30 @@
+/*
+ *  linux/arch/arm/mach-versatile/core.h
+ *
+ *  Copyright (C) 2004 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* Portions copyright Broadcom 2008 */
+#ifndef __ASM_ARCH_BCMRING_H
+#define __ASM_ARCH_BCMRING_H
+
+void __init bcmring_amba_init(void);
+void __init bcmring_map_io(void);
+void __init bcmring_init_irq(void);
+
+extern struct sys_timer bcmring_timer;
+#endif
diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h
new file mode 100644
index 00000000000..f01da877148
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global.h
@@ -0,0 +1,13 @@
+#ifndef _CFG_GLOBAL_H_
+#define _CFG_GLOBAL_H_
+
+#include <cfg_global_defines.h>
+
+#define CFG_GLOBAL_CHIP                         BCM11107
+#define CFG_GLOBAL_CHIP_FAMILY                  CFG_GLOBAL_CHIP_FAMILY_BCMRING
+#define CFG_GLOBAL_CHIP_REV                     0xB0
+#define CFG_GLOBAL_RAM_SIZE                     0x10000000
+#define CFG_GLOBAL_RAM_BASE                     0x00000000
+#define CFG_GLOBAL_RAM_RESERVED_SIZE            0x000000
+
+#endif /* _CFG_GLOBAL_H_ */
diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/cfg_global_defines.h
new file mode 100644
index 00000000000..b5beb0b3073
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global_defines.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CFG_GLOBAL_DEFINES_H
+#define CFG_GLOBAL_DEFINES_H
+
+/* CHIP */
+#define BCM1103 1
+
+#define BCM1191 4
+#define BCM2153 5
+#define BCM2820 6
+
+#define BCM2826 8
+#define FPGA11107 9
+#define BCM11107   10
+#define BCM11109   11
+#define BCM11170   12
+#define BCM11110   13
+#define BCM11211   14
+
+/* CFG_GLOBAL_CHIP_FAMILY types */
+#define CFG_GLOBAL_CHIP_FAMILY_NONE        0
+#define CFG_GLOBAL_CHIP_FAMILY_BCM116X     2
+#define CFG_GLOBAL_CHIP_FAMILY_BCMRING     4
+#define CFG_GLOBAL_CHIP_FAMILY_BCM1103     8
+
+#define IMAGE_HEADER_SIZE_CHECKSUM    4
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
new file mode 100644
index 00000000000..447eb340c61
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -0,0 +1,60 @@
+/*
+ *
+ *  This file contains the hardware definitions of the BCMRing.
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/memory.h>
+#include <cfg_global.h>
+#include <mach/csp/mm_io.h>
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_START               PHYS_OFFSET
+
+#define RAM_SIZE                (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
+#define RAM_BASE                PAGE_OFFSET
+
+#define pcibios_assign_all_busses()	1
+
+/* Macros to make managing spinlocks a bit more controlled in terms of naming. */
+/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */
+#if defined(__KERNEL__)
+#define HW_DECLARE_SPINLOCK(name)  DEFINE_SPINLOCK(bcmring_##name##_reg_lock);
+#define HW_EXTERN_SPINLOCK(name)   extern spinlock_t bcmring_##name##_reg_lock;
+#define HW_IRQ_SAVE(name, val)     spin_lock_irqsave(&bcmring_##name##_reg_lock, (val))
+#define HW_IRQ_RESTORE(name, val)  spin_unlock_irqrestore(&bcmring_##name##_reg_lock, (val))
+#else
+#define HW_DECLARE_SPINLOCK(name)
+#define HW_EXTERN_SPINLOCK(name)
+#define HW_IRQ_SAVE(name, val)     {(void)(name); (void)(val); }
+#define HW_IRQ_RESTORE(name, val)  {(void)(name); (void)(val); }
+#endif
+
+#ifndef HW_IO_PHYS_TO_VIRT
+#define HW_IO_PHYS_TO_VIRT MM_IO_PHYS_TO_VIRT
+#endif
+#define HW_IO_VIRT_TO_PHYS MM_IO_VIRT_TO_PHYS
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
new file mode 100644
index 00000000000..cdbf93c694a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -0,0 +1,54 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/csp/chipcHw_inline.h>
+
+extern int bcmring_arch_warm_reboot;
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, char *cmd)
+{
+	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
+
+	if (mode == 'h') {
+		/* Reboot configured in proc entry */
+		if (bcmring_arch_warm_reboot) {
+			printk("warm reset\n");
+			/* Issue Warm reset (do not reset ethernet switch, keep alive) */
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
+		} else {
+			/* Force reset of everything */
+			printk("force reset\n");
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+		}
+	} else {
+		/* Force reset of everything */
+		printk("force reset\n");
+		chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+	}
+}
+
+#endif
-- 
GitLab


From 278a6752e869b0f4a03ce5ac0588b31b50712903 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:58:26 +0100
Subject: [PATCH 207/257] ARM: 5644/1: add bcmring core.c, clock.c, clock.h

add core.c, clock.c, and clock.h in mach-bcmring

implement timer init, clocksource init, amba device init
implement clock set/get enable/disable API
add dummy clkdev.h

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/clock.c               | 224 ++++++++++++
 arch/arm/mach-bcmring/clock.h               |  33 ++
 arch/arm/mach-bcmring/core.c                | 367 ++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/clkdev.h |   7 +
 4 files changed, 631 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/clock.c
 create mode 100644 arch/arm/mach-bcmring/clock.h
 create mode 100644 arch/arm/mach-bcmring/core.c
 create mode 100644 arch/arm/mach-bcmring/include/mach/clkdev.h

diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c
new file mode 100644
index 00000000000..14bafc38f2d
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.c
@@ -0,0 +1,224 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <mach/csp/hw_cfg.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <asm/clkdev.h>
+
+#include "clock.h"
+
+#define clk_is_primary(x)       ((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_pll1(x)          ((x)->type & CLK_TYPE_PLL1)
+#define clk_is_pll2(x)          ((x)->type & CLK_TYPE_PLL2)
+#define clk_is_programmable(x)  ((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_bypassable(x)    ((x)->type & CLK_TYPE_BYPASSABLE)
+
+#define clk_is_using_xtal(x)    ((x)->mode & CLK_MODE_XTAL)
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+	if (!clk)
+		return;
+
+	/* enable parent clock first */
+	if (clk->parent)
+		__clk_enable(clk->parent);
+
+	if (clk->use_cnt++ == 0) {
+		if (clk_is_pll1(clk)) {	/* PLL1 */
+			chipcHw_pll1Enable(clk->rate_hz, 0);
+		} else if (clk_is_pll2(clk)) {	/* PLL2 */
+			chipcHw_pll2Enable(clk->rate_hz);
+		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
+			if (!clk_is_primary(clk))
+				chipcHw_bypassClockEnable(clk->csp_id);
+		} else {	/* source is PLL */
+			chipcHw_setClockEnable(clk->csp_id);
+		}
+	}
+}
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void __clk_disable(struct clk *clk)
+{
+	if (!clk)
+		return;
+
+	BUG_ON(clk->use_cnt == 0);
+
+	if (--clk->use_cnt == 0) {
+		if (clk_is_pll1(clk)) {	/* PLL1 */
+			chipcHw_pll1Disable();
+		} else if (clk_is_pll2(clk)) {	/* PLL2 */
+			chipcHw_pll2Disable();
+		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
+			if (!clk_is_primary(clk))
+				chipcHw_bypassClockDisable(clk->csp_id);
+		} else {	/* source is PLL */
+			chipcHw_setClockDisable(clk->csp_id);
+		}
+	}
+
+	if (clk->parent)
+		__clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (!clk)
+		return 0;
+
+	return clk->rate_hz;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	unsigned long actual;
+	unsigned long rate_hz;
+
+	if (!clk)
+		return -EINVAL;
+
+	if (!clk_is_programmable(clk))
+		return -EINVAL;
+
+	if (clk->use_cnt)
+		return -EBUSY;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	actual = clk->parent->rate_hz;
+	rate_hz = min(actual, rate);
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return rate_hz;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	unsigned long actual;
+	unsigned long rate_hz;
+
+	if (!clk)
+		return -EINVAL;
+
+	if (!clk_is_programmable(clk))
+		return -EINVAL;
+
+	if (clk->use_cnt)
+		return -EBUSY;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	actual = clk->parent->rate_hz;
+	rate_hz = min(actual, rate);
+	rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz);
+	clk->rate_hz = rate_hz;
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	if (!clk)
+		return NULL;
+
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	unsigned long flags;
+	struct clk *old_parent;
+
+	if (!clk || !parent)
+		return -EINVAL;
+
+	if (!clk_is_primary(parent) || !clk_is_bypassable(clk))
+		return -EINVAL;
+
+	/* if more than one user, parent is not allowed */
+	if (clk->use_cnt > 1)
+		return -EBUSY;
+
+	if (clk->parent == parent)
+		return 0;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	old_parent = clk->parent;
+	clk->parent = parent;
+	if (clk_is_using_xtal(parent))
+		clk->mode |= CLK_MODE_XTAL;
+	else
+		clk->mode &= (~CLK_MODE_XTAL);
+
+	/* if clock is active */
+	if (clk->use_cnt != 0) {
+		clk->use_cnt--;
+		/* enable clock with the new parent */
+		__clk_enable(clk);
+		/* disable the old parent */
+		__clk_disable(old_parent);
+	}
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/arm/mach-bcmring/clock.h b/arch/arm/mach-bcmring/clock.h
new file mode 100644
index 00000000000..5e0b9813897
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/chipcHw_def.h>
+
+#define CLK_TYPE_PRIMARY         1	/* primary clock must NOT have a parent */
+#define CLK_TYPE_PLL1            2	/* PPL1 */
+#define CLK_TYPE_PLL2            4	/* PPL2 */
+#define CLK_TYPE_PROGRAMMABLE    8	/* programmable clock rate */
+#define CLK_TYPE_BYPASSABLE      16	/* parent can be changed */
+
+#define CLK_MODE_XTAL            1	/* clock source is from crystal */
+
+struct clk {
+	const char *name;	/* clock name */
+	unsigned int type;	/* clock type */
+	unsigned int mode;	/* current mode */
+	volatile int use_bypass;	/* indicate if it's in bypass mode */
+	chipcHw_CLOCK_e csp_id;	/* clock ID for CSP CHIPC */
+	unsigned long rate_hz;	/* clock rate in Hz */
+	unsigned int use_cnt;	/* usage count */
+	struct clk *parent;	/* parent clock */
+};
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
new file mode 100644
index 00000000000..492c649f451
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.c
@@ -0,0 +1,367 @@
+/*
+ *  derived from linux/arch/arm/mach-versatile/core.c
+ *  linux/arch/arm/mach-bcmring/core.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* Portions copyright Broadcom 2008 */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+
+#include <linux/amba/bus.h>
+#include <mach/csp/mm_addr.h>
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include <cfg_global.h>
+
+#include "clock.h"
+
+#include <csp/secHw.h>
+#include <mach/csp/secHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define AMBA_DEVICE(name, initname, base, plat, size)       \
+static struct amba_device name##_device = {     \
+   .dev = {                                     \
+      .coherent_dma_mask = ~0,                  \
+      .init_name = initname,                    \
+      .platform_data = plat                     \
+   },                                           \
+   .res = {                                     \
+      .start = MM_ADDR_IO_##base,               \
+		.end = MM_ADDR_IO_##base + (size) - 1,    \
+      .flags = IORESOURCE_MEM                   \
+   },                                           \
+   .dma_mask = ~0,                              \
+   .irq = {                                     \
+      IRQ_##base                                \
+   }                                            \
+}
+
+
+AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
+AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+
+static struct clk pll1_clk = {
+	.name = "PLL1",
+	.type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
+	.rate_hz = 2000000000,
+	.use_cnt = 7,
+};
+
+static struct clk uart_clk = {
+	.name = "UART",
+	.type = CLK_TYPE_PROGRAMMABLE,
+	.csp_id = chipcHw_CLOCK_UART,
+	.rate_hz = HW_CFG_UART_CLK_HZ,
+	.parent = &pll1_clk,
+};
+
+static struct clk_lookup lookups[] = {
+	{			/* UART0 */
+	 .dev_id = "uarta",
+	 .clk = &uart_clk,
+	 }, {			/* UART1 */
+	     .dev_id = "uartb",
+	     .clk = &uart_clk,
+	     }
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uartA_device,
+	&uartB_device,
+};
+
+void __init bcmring_amba_init(void)
+{
+	int i;
+	u32 bus_clock;
+
+/* Linux is run initially in non-secure mode. Secure peripherals */
+/* generate FIQ, and must be handled in secure mode. Until we have */
+/* a linux security monitor implementation, keep everything in */
+/* non-secure mode. */
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
+	secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
+			  secHw_BLK_MASK_KEY_SCAN |
+			  secHw_BLK_MASK_TOUCH_SCREEN |
+			  secHw_BLK_MASK_UART0 |
+			  secHw_BLK_MASK_UART1 |
+			  secHw_BLK_MASK_WATCHDOG |
+			  secHw_BLK_MASK_SPUM |
+			  secHw_BLK_MASK_DDR2 |
+			  secHw_BLK_MASK_SPU |
+			  secHw_BLK_MASK_PKA |
+			  secHw_BLK_MASK_RNG |
+			  secHw_BLK_MASK_RTC |
+			  secHw_BLK_MASK_OTP |
+			  secHw_BLK_MASK_BOOT |
+			  secHw_BLK_MASK_MPU |
+			  secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
+
+	/* Only the devices attached to the AMBA bus are enabled just before the bus is */
+	/* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
+	/* driver to access these blocks. The bus is probed, and the drivers are loaded. */
+	/* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
+	bus_clock = chipcHw_REG_BUS_CLOCK_GE
+	    | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
+
+	chipcHw_busInterfaceClockEnable(bus_clock);
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+}
+
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE		 MM_IO_BASE_TMR
+#define TIMER1_VA_BASE		(MM_IO_BASE_TMR + 0x20)
+#define TIMER2_VA_BASE		(MM_IO_BASE_TMR + 0x40)
+#define TIMER3_VA_BASE          (MM_IO_BASE_TMR + 0x60)
+
+/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically  150-166 MHz */
+#if defined(CONFIG_ARCH_FPGA11107)
+/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
+/* slow down Linux's sense of time */
+#define TIMER0_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER1_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_MHZ  (tmrHw_HIGH_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_KHZ   (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
+#else
+#define TIMER0_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER1_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_MHZ  tmrHw_HIGH_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_KHZ  (tmrHw_HIGH_FREQUENCY_HZ / 1000)
+#endif
+
+#define TICKS_PER_uSEC     TIMER0_FREQUENCY_MHZ
+
+/*
+ *  These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
+#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 4)	/* Divide by 16 */
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
+#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
+#else
+#define TIMER_RELOAD	(TIMER_INTERVAL)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
+#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
+#endif
+
+static void timer_set_mode(enum clock_event_mode mode,
+			   struct clock_event_device *clk)
+{
+	unsigned long ctrl;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+
+		ctrl = TIMER_CTRL_PERIODIC;
+		ctrl |=
+		    TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
+		    TIMER_CTRL_ENABLE;
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* period set, and timer enabled in 'next_event' hook */
+		ctrl = TIMER_CTRL_ONESHOT;
+		ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		ctrl = 0;
+	}
+
+	writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
+}
+
+static int timer_set_next_event(unsigned long evt,
+				struct clock_event_device *unused)
+{
+	unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
+
+	writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
+	writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
+
+	return 0;
+}
+
+static struct clock_event_device timer0_clockevent = {
+	.name = "timer0",
+	.shift = 32,
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode = timer_set_mode,
+	.set_next_event = timer_set_next_event,
+};
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &timer0_clockevent;
+
+	writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction bcmring_timer_irq = {
+	.name = "bcmring Timer Tick",
+	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler = bcmring_timer_interrupt,
+};
+
+static cycle_t bcmring_get_cycles_timer1(void)
+{
+	return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
+}
+
+static cycle_t bcmring_get_cycles_timer3(void)
+{
+	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
+}
+
+static struct clocksource clocksource_bcmring_timer1 = {
+	.name = "timer1",
+	.rating = 200,
+	.read = bcmring_get_cycles_timer1,
+	.mask = CLOCKSOURCE_MASK(32),
+	.shift = 20,
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct clocksource clocksource_bcmring_timer3 = {
+	.name = "timer3",
+	.rating = 100,
+	.read = bcmring_get_cycles_timer3,
+	.mask = CLOCKSOURCE_MASK(32),
+	.shift = 20,
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bcmring_clocksource_init(void)
+{
+	/* setup timer1 as free-running clocksource */
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
+	writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
+	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+	       TIMER1_VA_BASE + TIMER_CTRL);
+
+	clocksource_bcmring_timer1.mult =
+	    clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000,
+				 clocksource_bcmring_timer1.shift);
+	clocksource_register(&clocksource_bcmring_timer1);
+
+	/* setup timer3 as free-running clocksource */
+	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+	writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
+	writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
+	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+	       TIMER3_VA_BASE + TIMER_CTRL);
+
+	clocksource_bcmring_timer3.mult =
+	    clocksource_khz2mult(TIMER3_FREQUENCY_KHZ,
+				 clocksource_bcmring_timer3.shift);
+	clocksource_register(&clocksource_bcmring_timer3);
+
+	return 0;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init bcmring_init_timer(void)
+{
+	printk(KERN_INFO "bcmring_init_timer\n");
+	/*
+	 * Initialise to a known state (all timers off)
+	 */
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+	/*
+	 * Make irqs happen for the system timer
+	 */
+	setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
+
+	bcmring_clocksource_init();
+
+	timer0_clockevent.mult =
+	    div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
+	timer0_clockevent.max_delta_ns =
+	    clockevent_delta2ns(0xffffffff, &timer0_clockevent);
+	timer0_clockevent.min_delta_ns =
+	    clockevent_delta2ns(0xf, &timer0_clockevent);
+
+	timer0_clockevent.cpumask = cpumask_of(0);
+	clockevents_register_device(&timer0_clockevent);
+}
+
+struct sys_timer bcmring_timer = {
+	.init = bcmring_init_timer,
+};
diff --git a/arch/arm/mach-bcmring/include/mach/clkdev.h b/arch/arm/mach-bcmring/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
-- 
GitLab


From b7462d654f623738b4b3e03cff20f68b5b9a77f5 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:59:04 +0100
Subject: [PATCH 208/257] ARM: 5645/1: bcmring: add bcmring irq.c

init irq and handler
add irq controller register file and header files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/intcHw.h    |  40 +++
 .../include/mach/csp/intcHw_reg.h             | 246 ++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/irqs.h     | 132 ++++++++++
 arch/arm/mach-bcmring/irq.c                   | 127 +++++++++
 4 files changed, 545 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/intcHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/irqs.h
 create mode 100644 arch/arm/mach-bcmring/irq.c

diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h
new file mode 100644
index 00000000000..1c639c8ee08
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/intcHw.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+/****************************************************************************/
+/**
+*  @file    intcHw.h
+*
+*  @brief   generic interrupt controller API
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_H
+#define _INTCHW_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/intcHw_reg.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask);
+static inline void intcHw_irq_enable(void *basep, uint32_t mask);
+
+#endif /* _INTCHW_H */
+
diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
new file mode 100644
index 00000000000..e01fc4607c9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
@@ -0,0 +1,246 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    intcHw_reg.h
+*
+*  @brief   platform specific interrupt controller bit assignments
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_REG_H
+#define _INTCHW_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/reg.h>
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define INTCHW_NUM_IRQ_PER_INTC   32	/* Maximum number of interrupt controllers */
+#define INTCHW_NUM_INTC           3
+
+/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */
+#define INTCHW_INTC0    ((void *)MM_IO_BASE_INTC0)
+#define INTCHW_INTC1    ((void *)MM_IO_BASE_INTC1)
+#define INTCHW_SINTC    ((void *)MM_IO_BASE_SINTC)
+
+/* INTC0 - interrupt controller 0 */
+#define INTCHW_INTC0_PIF_BITNUM           31	/* Peripheral interface interrupt */
+#define INTCHW_INTC0_CLCD_BITNUM          30	/* LCD Controller interrupt */
+#define INTCHW_INTC0_GE_BITNUM            29	/* Graphic engine interrupt */
+#define INTCHW_INTC0_APM_BITNUM           28	/* Audio process module interrupt */
+#define INTCHW_INTC0_ESW_BITNUM           27	/* Ethernet switch interrupt */
+#define INTCHW_INTC0_SPIH_BITNUM          26	/* SPI host interrupt */
+#define INTCHW_INTC0_TIMER3_BITNUM        25	/* Timer3 interrupt */
+#define INTCHW_INTC0_TIMER2_BITNUM        24	/* Timer2 interrupt */
+#define INTCHW_INTC0_TIMER1_BITNUM        23	/* Timer1 interrupt */
+#define INTCHW_INTC0_TIMER0_BITNUM        22	/* Timer0 interrupt */
+#define INTCHW_INTC0_SDIOH1_BITNUM        21	/* SDIO1 host interrupt */
+#define INTCHW_INTC0_SDIOH0_BITNUM        20	/* SDIO0 host interrupt */
+#define INTCHW_INTC0_USBD_BITNUM          19	/* USB device interrupt */
+#define INTCHW_INTC0_USBH1_BITNUM         18	/* USB1 host interrupt */
+#define INTCHW_INTC0_USBHD2_BITNUM        17	/* USB host2/device2 interrupt */
+#define INTCHW_INTC0_VPM_BITNUM           16	/* Voice process module interrupt */
+#define INTCHW_INTC0_DMA1C7_BITNUM        15	/* DMA1 channel 7 interrupt */
+#define INTCHW_INTC0_DMA1C6_BITNUM        14	/* DMA1 channel 6 interrupt */
+#define INTCHW_INTC0_DMA1C5_BITNUM        13	/* DMA1 channel 5 interrupt */
+#define INTCHW_INTC0_DMA1C4_BITNUM        12	/* DMA1 channel 4 interrupt */
+#define INTCHW_INTC0_DMA1C3_BITNUM        11	/* DMA1 channel 3 interrupt */
+#define INTCHW_INTC0_DMA1C2_BITNUM        10	/* DMA1 channel 2 interrupt */
+#define INTCHW_INTC0_DMA1C1_BITNUM         9	/* DMA1 channel 1 interrupt */
+#define INTCHW_INTC0_DMA1C0_BITNUM         8	/* DMA1 channel 0 interrupt */
+#define INTCHW_INTC0_DMA0C7_BITNUM         7	/* DMA0 channel 7 interrupt */
+#define INTCHW_INTC0_DMA0C6_BITNUM         6	/* DMA0 channel 6 interrupt */
+#define INTCHW_INTC0_DMA0C5_BITNUM         5	/* DMA0 channel 5 interrupt */
+#define INTCHW_INTC0_DMA0C4_BITNUM         4	/* DMA0 channel 4 interrupt */
+#define INTCHW_INTC0_DMA0C3_BITNUM         3	/* DMA0 channel 3 interrupt */
+#define INTCHW_INTC0_DMA0C2_BITNUM         2	/* DMA0 channel 2 interrupt */
+#define INTCHW_INTC0_DMA0C1_BITNUM         1	/* DMA0 channel 1 interrupt */
+#define INTCHW_INTC0_DMA0C0_BITNUM         0	/* DMA0 channel 0 interrupt */
+
+#define INTCHW_INTC0_PIF                  (1<<INTCHW_INTC0_PIF_BITNUM)
+#define INTCHW_INTC0_CLCD                 (1<<INTCHW_INTC0_CLCD_BITNUM)
+#define INTCHW_INTC0_GE                   (1<<INTCHW_INTC0_GE_BITNUM)
+#define INTCHW_INTC0_APM                  (1<<INTCHW_INTC0_APM_BITNUM)
+#define INTCHW_INTC0_ESW                  (1<<INTCHW_INTC0_ESW_BITNUM)
+#define INTCHW_INTC0_SPIH                 (1<<INTCHW_INTC0_SPIH_BITNUM)
+#define INTCHW_INTC0_TIMER3               (1<<INTCHW_INTC0_TIMER3_BITNUM)
+#define INTCHW_INTC0_TIMER2               (1<<INTCHW_INTC0_TIMER2_BITNUM)
+#define INTCHW_INTC0_TIMER1               (1<<INTCHW_INTC0_TIMER1_BITNUM)
+#define INTCHW_INTC0_TIMER0               (1<<INTCHW_INTC0_TIMER0_BITNUM)
+#define INTCHW_INTC0_SDIOH1               (1<<INTCHW_INTC0_SDIOH1_BITNUM)
+#define INTCHW_INTC0_SDIOH0               (1<<INTCHW_INTC0_SDIOH0_BITNUM)
+#define INTCHW_INTC0_USBD                 (1<<INTCHW_INTC0_USBD_BITNUM)
+#define INTCHW_INTC0_USBH1                (1<<INTCHW_INTC0_USBH1_BITNUM)
+#define INTCHW_INTC0_USBHD2               (1<<INTCHW_INTC0_USBHD2_BITNUM)
+#define INTCHW_INTC0_VPM                  (1<<INTCHW_INTC0_VPM_BITNUM)
+#define INTCHW_INTC0_DMA1C7               (1<<INTCHW_INTC0_DMA1C7_BITNUM)
+#define INTCHW_INTC0_DMA1C6               (1<<INTCHW_INTC0_DMA1C6_BITNUM)
+#define INTCHW_INTC0_DMA1C5               (1<<INTCHW_INTC0_DMA1C5_BITNUM)
+#define INTCHW_INTC0_DMA1C4               (1<<INTCHW_INTC0_DMA1C4_BITNUM)
+#define INTCHW_INTC0_DMA1C3               (1<<INTCHW_INTC0_DMA1C3_BITNUM)
+#define INTCHW_INTC0_DMA1C2               (1<<INTCHW_INTC0_DMA1C2_BITNUM)
+#define INTCHW_INTC0_DMA1C1               (1<<INTCHW_INTC0_DMA1C1_BITNUM)
+#define INTCHW_INTC0_DMA1C0               (1<<INTCHW_INTC0_DMA1C0_BITNUM)
+#define INTCHW_INTC0_DMA0C7               (1<<INTCHW_INTC0_DMA0C7_BITNUM)
+#define INTCHW_INTC0_DMA0C6               (1<<INTCHW_INTC0_DMA0C6_BITNUM)
+#define INTCHW_INTC0_DMA0C5               (1<<INTCHW_INTC0_DMA0C5_BITNUM)
+#define INTCHW_INTC0_DMA0C4               (1<<INTCHW_INTC0_DMA0C4_BITNUM)
+#define INTCHW_INTC0_DMA0C3               (1<<INTCHW_INTC0_DMA0C3_BITNUM)
+#define INTCHW_INTC0_DMA0C2               (1<<INTCHW_INTC0_DMA0C2_BITNUM)
+#define INTCHW_INTC0_DMA0C1               (1<<INTCHW_INTC0_DMA0C1_BITNUM)
+#define INTCHW_INTC0_DMA0C0               (1<<INTCHW_INTC0_DMA0C0_BITNUM)
+
+/* INTC1 - interrupt controller 1 */
+#define INTCHW_INTC1_DDRVPMP_BITNUM       27	/* DDR and VPM PLL clock phase relationship interupt (Not for A0) */
+#define INTCHW_INTC1_DDRVPMT_BITNUM       26	/* DDR and VPM HW phase align timeout interrupt (Not for A0) */
+#define INTCHW_INTC1_DDRP_BITNUM          26	/* DDR and PLL clock phase relationship interupt (For A0 only)) */
+#define INTCHW_INTC1_RTC2_BITNUM          25	/* Real time clock tamper interrupt */
+#define INTCHW_INTC1_VDEC_BITNUM          24	/* Hantro Video Decoder interrupt */
+/* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
+#define INTCHW_INTC1_SPUM_BITNUM          23	/* Secure process module interrupt */
+#define INTCHW_INTC1_RTC1_BITNUM          22	/* Real time clock one-shot interrupt */
+#define INTCHW_INTC1_RTC0_BITNUM          21	/* Real time clock periodic interrupt */
+#define INTCHW_INTC1_RNG_BITNUM           20	/* Random number generator interrupt */
+#define INTCHW_INTC1_FMPU_BITNUM          19	/* Flash memory parition unit interrupt */
+#define INTCHW_INTC1_VMPU_BITNUM          18	/* VRAM memory partition interrupt */
+#define INTCHW_INTC1_DMPU_BITNUM          17	/* DDR2 memory partition interrupt */
+#define INTCHW_INTC1_KEYC_BITNUM          16	/* Key pad controller interrupt */
+#define INTCHW_INTC1_TSC_BITNUM           15	/* Touch screen controller interrupt */
+#define INTCHW_INTC1_UART0_BITNUM         14	/* UART 0 */
+#define INTCHW_INTC1_WDOG_BITNUM          13	/* Watchdog timer interrupt */
+
+#define INTCHW_INTC1_UART1_BITNUM         12	/* UART 1 */
+#define INTCHW_INTC1_PMUIRQ_BITNUM        11	/* ARM performance monitor interrupt */
+#define INTCHW_INTC1_COMMRX_BITNUM        10	/* ARM DDC receive interrupt */
+#define INTCHW_INTC1_COMMTX_BITNUM         9	/* ARM DDC transmit interrupt */
+#define INTCHW_INTC1_FLASHC_BITNUM         8	/* Flash controller interrupt */
+#define INTCHW_INTC1_GPHY_BITNUM           7	/* Gigabit Phy interrupt */
+#define INTCHW_INTC1_SPIS_BITNUM           6	/* SPI slave interrupt */
+#define INTCHW_INTC1_I2CS_BITNUM           5	/* I2C slave interrupt */
+#define INTCHW_INTC1_I2CH_BITNUM           4	/* I2C host interrupt */
+#define INTCHW_INTC1_I2S1_BITNUM           3	/* I2S1 interrupt */
+#define INTCHW_INTC1_I2S0_BITNUM           2	/* I2S0 interrupt */
+#define INTCHW_INTC1_GPIO1_BITNUM          1	/* GPIO bit 64//32 combined interrupt */
+#define INTCHW_INTC1_GPIO0_BITNUM          0	/* GPIO bit 31//0 combined interrupt */
+
+#define INTCHW_INTC1_DDRVPMT              (1<<INTCHW_INTC1_DDRVPMT_BITNUM)
+#define INTCHW_INTC1_DDRVPMP              (1<<INTCHW_INTC1_DDRVPMP_BITNUM)
+#define INTCHW_INTC1_DDRP                 (1<<INTCHW_INTC1_DDRP_BITNUM)
+#define INTCHW_INTC1_VDEC                 (1<<INTCHW_INTC1_VDEC_BITNUM)
+#define INTCHW_INTC1_SPUM                 (1<<INTCHW_INTC1_SPUM_BITNUM)
+#define INTCHW_INTC1_RTC2                 (1<<INTCHW_INTC1_RTC2_BITNUM)
+#define INTCHW_INTC1_RTC1                 (1<<INTCHW_INTC1_RTC1_BITNUM)
+#define INTCHW_INTC1_RTC0                 (1<<INTCHW_INTC1_RTC0_BITNUM)
+#define INTCHW_INTC1_RNG                  (1<<INTCHW_INTC1_RNG_BITNUM)
+#define INTCHW_INTC1_FMPU                 (1<<INTCHW_INTC1_FMPU_BITNUM)
+#define INTCHW_INTC1_IMPU                 (1<<INTCHW_INTC1_IMPU_BITNUM)
+#define INTCHW_INTC1_DMPU                 (1<<INTCHW_INTC1_DMPU_BITNUM)
+#define INTCHW_INTC1_KEYC                 (1<<INTCHW_INTC1_KEYC_BITNUM)
+#define INTCHW_INTC1_TSC                  (1<<INTCHW_INTC1_TSC_BITNUM)
+#define INTCHW_INTC1_UART0                (1<<INTCHW_INTC1_UART0_BITNUM)
+#define INTCHW_INTC1_WDOG                 (1<<INTCHW_INTC1_WDOG_BITNUM)
+#define INTCHW_INTC1_UART1                (1<<INTCHW_INTC1_UART1_BITNUM)
+#define INTCHW_INTC1_PMUIRQ               (1<<INTCHW_INTC1_PMUIRQ_BITNUM)
+#define INTCHW_INTC1_COMMRX               (1<<INTCHW_INTC1_COMMRX_BITNUM)
+#define INTCHW_INTC1_COMMTX               (1<<INTCHW_INTC1_COMMTX_BITNUM)
+#define INTCHW_INTC1_FLASHC               (1<<INTCHW_INTC1_FLASHC_BITNUM)
+#define INTCHW_INTC1_GPHY                 (1<<INTCHW_INTC1_GPHY_BITNUM)
+#define INTCHW_INTC1_SPIS                 (1<<INTCHW_INTC1_SPIS_BITNUM)
+#define INTCHW_INTC1_I2CS                 (1<<INTCHW_INTC1_I2CS_BITNUM)
+#define INTCHW_INTC1_I2CH                 (1<<INTCHW_INTC1_I2CH_BITNUM)
+#define INTCHW_INTC1_I2S1                 (1<<INTCHW_INTC1_I2S1_BITNUM)
+#define INTCHW_INTC1_I2S0                 (1<<INTCHW_INTC1_I2S0_BITNUM)
+#define INTCHW_INTC1_GPIO1                (1<<INTCHW_INTC1_GPIO1_BITNUM)
+#define INTCHW_INTC1_GPIO0                (1<<INTCHW_INTC1_GPIO0_BITNUM)
+
+/* SINTC secure int controller */
+#define INTCHW_SINTC_RTC2_BITNUM          15	/* Real time clock tamper interrupt */
+#define INTCHW_SINTC_TIMER3_BITNUM        14	/* Secure timer3 interrupt */
+#define INTCHW_SINTC_TIMER2_BITNUM        13	/* Secure timer2 interrupt */
+#define INTCHW_SINTC_TIMER1_BITNUM        12	/* Secure timer1 interrupt */
+#define INTCHW_SINTC_TIMER0_BITNUM        11	/* Secure timer0 interrupt */
+#define INTCHW_SINTC_SPUM_BITNUM          10	/* Secure process module interrupt */
+#define INTCHW_SINTC_RTC1_BITNUM           9	/* Real time clock one-shot interrupt */
+#define INTCHW_SINTC_RTC0_BITNUM           8	/* Real time clock periodic interrupt */
+#define INTCHW_SINTC_RNG_BITNUM            7	/* Random number generator interrupt */
+#define INTCHW_SINTC_FMPU_BITNUM           6	/* Flash memory parition unit interrupt */
+#define INTCHW_SINTC_VMPU_BITNUM           5	/* VRAM memory partition interrupt */
+#define INTCHW_SINTC_DMPU_BITNUM           4	/* DDR2 memory partition interrupt */
+#define INTCHW_SINTC_KEYC_BITNUM           3	/* Key pad controller interrupt */
+#define INTCHW_SINTC_TSC_BITNUM            2	/* Touch screen controller interrupt */
+#define INTCHW_SINTC_UART0_BITNUM          1	/* UART0 interrupt */
+#define INTCHW_SINTC_WDOG_BITNUM           0	/* Watchdog timer interrupt */
+
+#define INTCHW_SINTC_TIMER3               (1<<INTCHW_SINTC_TIMER3_BITNUM)
+#define INTCHW_SINTC_TIMER2               (1<<INTCHW_SINTC_TIMER2_BITNUM)
+#define INTCHW_SINTC_TIMER1               (1<<INTCHW_SINTC_TIMER1_BITNUM)
+#define INTCHW_SINTC_TIMER0               (1<<INTCHW_SINTC_TIMER0_BITNUM)
+#define INTCHW_SINTC_SPUM                 (1<<INTCHW_SINTC_SPUM_BITNUM)
+#define INTCHW_SINTC_RTC2                 (1<<INTCHW_SINTC_RTC2_BITNUM)
+#define INTCHW_SINTC_RTC1                 (1<<INTCHW_SINTC_RTC1_BITNUM)
+#define INTCHW_SINTC_RTC0                 (1<<INTCHW_SINTC_RTC0_BITNUM)
+#define INTCHW_SINTC_RNG                  (1<<INTCHW_SINTC_RNG_BITNUM)
+#define INTCHW_SINTC_FMPU                 (1<<INTCHW_SINTC_FMPU_BITNUM)
+#define INTCHW_SINTC_IMPU                 (1<<INTCHW_SINTC_IMPU_BITNUM)
+#define INTCHW_SINTC_DMPU                 (1<<INTCHW_SINTC_DMPU_BITNUM)
+#define INTCHW_SINTC_KEYC                 (1<<INTCHW_SINTC_KEYC_BITNUM)
+#define INTCHW_SINTC_TSC                  (1<<INTCHW_SINTC_TSC_BITNUM)
+#define INTCHW_SINTC_UART0                (1<<INTCHW_SINTC_UART0_BITNUM)
+#define INTCHW_SINTC_WDOG                 (1<<INTCHW_SINTC_WDOG_BITNUM)
+
+/* PL192 Vectored Interrupt Controller (VIC) layout */
+#define INTCHW_IRQSTATUS      0x00	/* IRQ status register */
+#define INTCHW_FIQSTATUS      0x04	/* FIQ status register */
+#define INTCHW_RAWINTR        0x08	/* Raw Interrupt Status register */
+#define INTCHW_INTSELECT      0x0c	/* Interrupt Select Register */
+#define INTCHW_INTENABLE      0x10	/* Interrupt Enable Register */
+#define INTCHW_INTENCLEAR     0x14	/* Interrupt Enable Clear Register */
+#define INTCHW_SOFTINT        0x18	/* Soft Interrupt Register */
+#define INTCHW_SOFTINTCLEAR   0x1c	/* Soft Interrupt Clear Register */
+#define INTCHW_PROTECTION     0x20	/* Protection Enable Register */
+#define INTCHW_SWPRIOMASK     0x24	/* Software Priority Mask Register */
+#define INTCHW_PRIODAISY      0x28	/* Priority Daisy Chain Register */
+#define INTCHW_VECTADDR0      0x100	/* Vector Address Registers */
+#define INTCHW_VECTPRIO0      0x200	/* Vector Priority Registers 0-31 */
+#define INTCHW_ADDRESS        0xf00	/* Vector Address Register 0-31 */
+#define INTCHW_PID            0xfe0	/* Peripheral ID Register 0-3 */
+#define INTCHW_PCELLID        0xff0	/* PrimeCell ID Register 0-3 */
+
+/* Example Usage: intcHw_irq_enable(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/*                intcHw_irq_clear(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/*                uint32_t bits = intcHw_irq_status(INTCHW_INTC0); */
+/*                uint32_t bits = intcHw_irq_raw_status(INTCHW_INTC0); */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+/* Clear one or more IRQ interrupts. */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask)
+{
+	__REG32(basep + INTCHW_INTENCLEAR) = mask;
+}
+
+/* Enables one or more IRQ interrupts. */
+static inline void intcHw_irq_enable(void *basep, uint32_t mask)
+{
+	__REG32(basep + INTCHW_INTENABLE) = mask;
+}
+
+#endif /* _INTCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/irqs.h b/arch/arm/mach-bcmring/include/mach/irqs.h
new file mode 100644
index 00000000000..b279b825d4a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/irqs.h
@@ -0,0 +1,132 @@
+/*
+ *  Copyright (C) 2007 Broadcom
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(ARCH_BCMRING_IRQS_H)
+#define ARCH_BCMRING_IRQS_H
+
+/* INTC0 - interrupt controller 0 */
+#define IRQ_INTC0_START     0
+#define IRQ_DMA0C0          0	/* DMA0 channel 0 interrupt */
+#define IRQ_DMA0C1          1	/* DMA0 channel 1 interrupt */
+#define IRQ_DMA0C2          2	/* DMA0 channel 2 interrupt */
+#define IRQ_DMA0C3          3	/* DMA0 channel 3 interrupt */
+#define IRQ_DMA0C4          4	/* DMA0 channel 4 interrupt */
+#define IRQ_DMA0C5          5	/* DMA0 channel 5 interrupt */
+#define IRQ_DMA0C6          6	/* DMA0 channel 6 interrupt */
+#define IRQ_DMA0C7          7	/* DMA0 channel 7 interrupt */
+#define IRQ_DMA1C0          8	/* DMA1 channel 0 interrupt */
+#define IRQ_DMA1C1          9	/* DMA1 channel 1 interrupt */
+#define IRQ_DMA1C2         10	/* DMA1 channel 2 interrupt */
+#define IRQ_DMA1C3         11	/* DMA1 channel 3 interrupt */
+#define IRQ_DMA1C4         12	/* DMA1 channel 4 interrupt */
+#define IRQ_DMA1C5         13	/* DMA1 channel 5 interrupt */
+#define IRQ_DMA1C6         14	/* DMA1 channel 6 interrupt */
+#define IRQ_DMA1C7         15	/* DMA1 channel 7 interrupt */
+#define IRQ_VPM            16	/* Voice process module interrupt */
+#define IRQ_USBHD2         17	/* USB host2/device2 interrupt */
+#define IRQ_USBH1          18	/* USB1 host interrupt */
+#define IRQ_USBD           19	/* USB device interrupt */
+#define IRQ_SDIOH0         20	/* SDIO0 host interrupt */
+#define IRQ_SDIOH1         21	/* SDIO1 host interrupt */
+#define IRQ_TIMER0         22	/* Timer0 interrupt */
+#define IRQ_TIMER1         23	/* Timer1 interrupt */
+#define IRQ_TIMER2         24	/* Timer2 interrupt */
+#define IRQ_TIMER3         25	/* Timer3 interrupt */
+#define IRQ_SPIH           26	/* SPI host interrupt */
+#define IRQ_ESW            27	/* Ethernet switch interrupt */
+#define IRQ_APM            28	/* Audio process module interrupt */
+#define IRQ_GE             29	/* Graphic engine interrupt */
+#define IRQ_CLCD           30	/* LCD Controller interrupt */
+#define IRQ_PIF            31	/* Peripheral interface interrupt */
+#define IRQ_INTC0_END      31
+
+/* INTC1 - interrupt controller 1 */
+#define IRQ_INTC1_START    32
+#define IRQ_GPIO0          32	/*  0 GPIO bit 31//0 combined interrupt */
+#define IRQ_GPIO1          33	/*  1 GPIO bit 64//32 combined interrupt */
+#define IRQ_I2S0           34	/*  2 I2S0 interrupt */
+#define IRQ_I2S1           35	/*  3 I2S1 interrupt */
+#define IRQ_I2CH           36	/*  4 I2C host interrupt */
+#define IRQ_I2CS           37	/*  5 I2C slave interrupt */
+#define IRQ_SPIS           38	/*  6 SPI slave interrupt */
+#define IRQ_GPHY           39	/*  7 Gigabit Phy interrupt */
+#define IRQ_FLASHC         40	/*  8 Flash controller interrupt */
+#define IRQ_COMMTX         41	/*  9 ARM DDC transmit interrupt */
+#define IRQ_COMMRX         42	/* 10 ARM DDC receive interrupt */
+#define IRQ_PMUIRQ         43	/* 11 ARM performance monitor interrupt */
+#define IRQ_UARTB          44	/* 12 UARTB */
+#define IRQ_WATCHDOG       45	/* 13 Watchdog timer interrupt */
+#define IRQ_UARTA          46	/* 14 UARTA */
+#define IRQ_TSC            47	/* 15 Touch screen controller interrupt */
+#define IRQ_KEYC           48	/* 16 Key pad controller interrupt */
+#define IRQ_DMPU           49	/* 17 DDR2 memory partition interrupt */
+#define IRQ_VMPU           50	/* 18 VRAM memory partition interrupt */
+#define IRQ_FMPU           51	/* 19 Flash memory parition unit interrupt */
+#define IRQ_RNG            52	/* 20 Random number generator interrupt */
+#define IRQ_RTC0           53	/* 21 Real time clock periodic interrupt */
+#define IRQ_RTC1           54	/* 22 Real time clock one-shot interrupt */
+#define IRQ_SPUM           55	/* 23 Secure process module interrupt */
+#define IRQ_VDEC           56	/* 24 Hantro video decoder interrupt */
+#define IRQ_RTC2           57	/* 25 Real time clock tamper interrupt */
+#define IRQ_DDRP           58	/* 26 DDR Panic interrupt */
+#define IRQ_INTC1_END      58
+
+/* SINTC secure int controller */
+#define IRQ_SINTC_START    59
+#define IRQ_SEC_WATCHDOG   59	/*  0 Watchdog timer interrupt */
+#define IRQ_SEC_UARTA      60	/*  1 UARTA interrupt */
+#define IRQ_SEC_TSC        61	/*  2 Touch screen controller interrupt */
+#define IRQ_SEC_KEYC       62	/*  3 Key pad controller interrupt */
+#define IRQ_SEC_DMPU       63	/*  4 DDR2 memory partition interrupt */
+#define IRQ_SEC_VMPU       64	/*  5 VRAM memory partition interrupt */
+#define IRQ_SEC_FMPU       65	/*  6 Flash memory parition unit interrupt */
+#define IRQ_SEC_RNG        66	/*  7 Random number generator interrupt */
+#define IRQ_SEC_RTC0       67	/*  8 Real time clock periodic interrupt */
+#define IRQ_SEC_RTC1       68	/*  9 Real time clock one-shot interrupt */
+#define IRQ_SEC_SPUM       69	/* 10 Secure process module interrupt */
+#define IRQ_SEC_TIMER0     70	/* 11 Secure timer0 interrupt */
+#define IRQ_SEC_TIMER1     71	/* 12 Secure timer1 interrupt */
+#define IRQ_SEC_TIMER2     72	/* 13 Secure timer2 interrupt */
+#define IRQ_SEC_TIMER3     73	/* 14 Secure timer3 interrupt */
+#define IRQ_SEC_RTC2       74	/* 15 Real time clock tamper interrupt */
+
+#define IRQ_SINTC_END      74
+
+/* Note: there are 3 INTC registers of 32 bits each. So internal IRQs could go from 0-95 */
+/*       Since IRQs are typically viewed in decimal, we start the gpio based IRQs off at 100 */
+/*       to make the mapping easy for humans to decipher. */
+
+#define IRQ_GPIO_0                  100
+
+#define NUM_INTERNAL_IRQS          (IRQ_SINTC_END+1)
+
+/* I couldn't get the gpioHw_reg.h file to be included cleanly, so I hardcoded it */
+/* define NUM_GPIO_IRQS               GPIOHW_TOTAL_NUM_PINS */
+#define NUM_GPIO_IRQS               62
+
+#define NR_IRQS                     (IRQ_GPIO_0 + NUM_GPIO_IRQS)
+
+#define IRQ_UNKNOWN                 -1
+
+/* Tune these bits to preclude noisy or unsupported interrupt sources as required. */
+#define IRQ_INTC0_VALID_MASK        0xffffffff
+#define IRQ_INTC1_VALID_MASK        0x07ffffff
+#define IRQ_SINTC_VALID_MASK        0x0000ffff
+
+#endif /* ARCH_BCMRING_IRQS_H */
diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c
new file mode 100644
index 00000000000..dc1c4939b0c
--- /dev/null
+++ b/arch/arm/mach-bcmring/irq.c
@@ -0,0 +1,127 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+#include <mach/csp/intcHw_reg.h>
+#include <mach/csp/mm_io.h>
+
+static void bcmring_mask_irq0(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC0_START),
+	       MM_IO_BASE_INTC0 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq0(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC0_START),
+	       MM_IO_BASE_INTC0 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq1(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC1_START),
+	       MM_IO_BASE_INTC1 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq1(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC1_START),
+	       MM_IO_BASE_INTC1 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq2(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_SINTC_START),
+	       MM_IO_BASE_SINTC + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq2(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_SINTC_START),
+	       MM_IO_BASE_SINTC + INTCHW_INTENABLE);
+}
+
+static struct irq_chip bcmring_irq0_chip = {
+	.typename = "ARM-INTC0",
+	.ack = bcmring_mask_irq0,
+	.mask = bcmring_mask_irq0,	/* mask a specific interrupt, blocking its delivery. */
+	.unmask = bcmring_unmask_irq0,	/* unmaks an interrupt */
+};
+
+static struct irq_chip bcmring_irq1_chip = {
+	.typename = "ARM-INTC1",
+	.ack = bcmring_mask_irq1,
+	.mask = bcmring_mask_irq1,
+	.unmask = bcmring_unmask_irq1,
+};
+
+static struct irq_chip bcmring_irq2_chip = {
+	.typename = "ARM-SINTC",
+	.ack = bcmring_mask_irq2,
+	.mask = bcmring_mask_irq2,
+	.unmask = bcmring_unmask_irq2,
+};
+
+static void vic_init(void __iomem *base, struct irq_chip *chip,
+		     unsigned int irq_start, unsigned int vic_sources)
+{
+	unsigned int i;
+	for (i = 0; i < 32; i++) {
+		unsigned int irq = irq_start + i;
+		set_irq_chip(irq, chip);
+		set_irq_chip_data(irq, base);
+
+		if (vic_sources & (1 << i)) {
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+	writel(0, base + INTCHW_INTSELECT);
+	writel(0, base + INTCHW_INTENABLE);
+	writel(~0, base + INTCHW_INTENCLEAR);
+	writel(0, base + INTCHW_IRQSTATUS);
+	writel(~0, base + INTCHW_SOFTINTCLEAR);
+}
+
+void __init bcmring_init_irq(void)
+{
+	vic_init((void __iomem *)MM_IO_BASE_INTC0, &bcmring_irq0_chip,
+		 IRQ_INTC0_START, IRQ_INTC0_VALID_MASK);
+	vic_init((void __iomem *)MM_IO_BASE_INTC1, &bcmring_irq1_chip,
+		 IRQ_INTC1_START, IRQ_INTC1_VALID_MASK);
+	vic_init((void __iomem *)MM_IO_BASE_SINTC, &bcmring_irq2_chip,
+		 IRQ_SINTC_START, IRQ_SINTC_VALID_MASK);
+
+	/* special cases */
+	if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) {
+		set_irq_handler(IRQ_GPIO0, handle_simple_irq);
+	}
+	if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) {
+		set_irq_handler(IRQ_GPIO1, handle_simple_irq);
+	}
+}
-- 
GitLab


From 661f78d80969eefb25a0e99c08c0eba81b37861e Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:59:57 +0100
Subject: [PATCH 209/257] ARM: 5646/1: bcmring: add mach-bcmring/mm.c and
 memory headers

memory map addresses
memory map description and init functions

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../mach-bcmring/include/mach/csp/mm_addr.h   | 101 ++++++++++++
 .../arm/mach-bcmring/include/mach/csp/mm_io.h | 147 ++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/memory.h   |  33 ++++
 .../include/mach/memory_settings.h            |  67 ++++++++
 arch/arm/mach-bcmring/include/mach/vmalloc.h  |  25 +++
 arch/arm/mach-bcmring/mm.c                    |  56 +++++++
 6 files changed, 429 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/mm_io.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/memory.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/memory_settings.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/vmalloc.h
 create mode 100644 arch/arm/mach-bcmring/mm.c

diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
new file mode 100644
index 00000000000..86bb58d4f58
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -0,0 +1,101 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    mm_addr.h
+*
+*  @brief   Memory Map address defintions
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _MM_ADDR_H
+#define _MM_ADDR_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*  Memory Map address definitions */
+
+#define MM_ADDR_DDR                0x00000000
+
+#define MM_ADDR_IO_VPM_EXTMEM_RSVD 0x0F000000	/* 16 MB - Reserved external memory for VPM use */
+
+#define MM_ADDR_IO_FLASHC          0x20000000
+#define MM_ADDR_IO_BROM            0x30000000
+#define MM_ADDR_IO_ARAM            0x30100000	/* 64 KB - extra cycle latency - WS switch */
+#define MM_ADDR_IO_DMA0            0x30200000
+#define MM_ADDR_IO_DMA1            0x30300000
+#define MM_ADDR_IO_ESW             0x30400000
+#define MM_ADDR_IO_CLCD            0x30500000
+#define MM_ADDR_IO_PIF             0x30580000
+#define MM_ADDR_IO_APM             0x30600000
+#define MM_ADDR_IO_SPUM            0x30700000
+#define MM_ADDR_IO_VPM_PROG        0x30800000
+#define MM_ADDR_IO_VPM_DATA        0x30A00000
+#define MM_ADDR_IO_VRAM            0x40000000	/* 64 KB  - security block in front of it */
+#define MM_ADDR_IO_CHIPC           0x80000000
+#define MM_ADDR_IO_UMI             0x80001000
+#define MM_ADDR_IO_NAND            0x80001800
+#define MM_ADDR_IO_LEDM            0x80002000
+#define MM_ADDR_IO_PWM             0x80002040
+#define MM_ADDR_IO_VINTC           0x80003000
+#define MM_ADDR_IO_GPIO0           0x80004000
+#define MM_ADDR_IO_GPIO1           0x80004800
+#define MM_ADDR_IO_I2CS            0x80005000
+#define MM_ADDR_IO_SPIS            0x80006000
+#define MM_ADDR_IO_HPM             0x80007400
+#define MM_ADDR_IO_HPM_REMAP       0x80007800
+#define MM_ADDR_IO_TZPC            0x80008000
+#define MM_ADDR_IO_MPU             0x80009000
+#define MM_ADDR_IO_SPUMP           0x8000a000
+#define MM_ADDR_IO_PKA             0x8000b000
+#define MM_ADDR_IO_RNG             0x8000c000
+#define MM_ADDR_IO_KEYC            0x8000d000
+#define MM_ADDR_IO_BBL             0x8000e000
+#define MM_ADDR_IO_OTP             0x8000f000
+#define MM_ADDR_IO_I2S0            0x80010000
+#define MM_ADDR_IO_I2S1            0x80011000
+#define MM_ADDR_IO_UARTA           0x80012000
+#define MM_ADDR_IO_UARTB           0x80013000
+#define MM_ADDR_IO_I2CH            0x80014020
+#define MM_ADDR_IO_SPIH            0x80015000
+#define MM_ADDR_IO_TSC             0x80016000
+#define MM_ADDR_IO_TMR             0x80017000
+#define MM_ADDR_IO_WATCHDOG        0x80017800
+#define MM_ADDR_IO_ETM             0x80018000
+#define MM_ADDR_IO_DDRC            0x80019000
+#define MM_ADDR_IO_SINTC           0x80100000
+#define MM_ADDR_IO_INTC0           0x80200000
+#define MM_ADDR_IO_INTC1           0x80201000
+#define MM_ADDR_IO_GE              0x80300000
+#define MM_ADDR_IO_USB_CTLR0       0x80400000
+#define MM_ADDR_IO_USB_CTLR1       0x80410000
+#define MM_ADDR_IO_USB_PHY         0x80420000
+#define MM_ADDR_IO_SDIOH0          0x80500000
+#define MM_ADDR_IO_SDIOH1          0x80600000
+#define MM_ADDR_IO_VDEC            0x80700000
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_ADDR_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
new file mode 100644
index 00000000000..de92ec6a01a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
@@ -0,0 +1,147 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    mm_io.h
+*
+*  @brief   Memory Map I/O definitions
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _MM_IO_H
+#define _MM_IO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/mm_addr.h>
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(CONFIG_MMU)
+
+/* This macro is referenced in <mach/io.h>
+ * Phys to Virtual 0xNyxxxxxx => 0xFNxxxxxx
+ * This macro is referenced in <asm/arch/io.h>
+ *
+ * Assume VPM address is the last x MB of memory.  For VPM, map to
+ * 0xf0000000 and up.
+ */
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#ifdef __ASSEMBLY__
+#define MM_IO_PHYS_TO_VIRT(phys)       (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))
+#else
+#define MM_IO_PHYS_TO_VIRT(phys)       (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
+			(0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)))
+#endif
+#endif
+
+/* Virtual to Physical 0xFNxxxxxx => 0xN0xxxxxx */
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#ifdef __ASSEMBLY__
+#define MM_IO_VIRT_TO_PHYS(virt)       ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))
+#else
+#define MM_IO_VIRT_TO_PHYS(virt)       (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
+			((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)))
+#endif
+#endif
+
+#else
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#define MM_IO_PHYS_TO_VIRT(phys)       (phys)
+#endif
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#define MM_IO_VIRT_TO_PHYS(virt)       (virt)
+#endif
+
+#endif
+
+/* Registers in 0xExxxxxxx that should be moved to 0xFxxxxxxx */
+#define MM_IO_BASE_FLASHC              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_FLASHC)
+#define MM_IO_BASE_NAND                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_NAND)
+#define MM_IO_BASE_UMI                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UMI)
+
+#define MM_IO_START MM_ADDR_IO_FLASHC	/* Physical beginning of IO mapped memory */
+#define MM_IO_BASE  MM_IO_BASE_FLASHC	/* Virtual beginning of IO mapped memory */
+
+#define MM_IO_BASE_BROM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BROM)
+#define MM_IO_BASE_ARAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ARAM)
+#define MM_IO_BASE_DMA0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA0)
+#define MM_IO_BASE_DMA1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA1)
+#define MM_IO_BASE_ESW                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ESW)
+#define MM_IO_BASE_CLCD                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CLCD)
+#define MM_IO_BASE_PIF                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PIF)
+#define MM_IO_BASE_APM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_APM)
+#define MM_IO_BASE_SPUM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUM)
+#define MM_IO_BASE_VPM_PROG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_PROG)
+#define MM_IO_BASE_VPM_DATA            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_DATA)
+
+#define MM_IO_BASE_VRAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VRAM)
+
+#define MM_IO_BASE_CHIPC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CHIPC)
+#define MM_IO_BASE_DDRC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DDRC)
+#define MM_IO_BASE_LEDM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_LEDM)
+#define MM_IO_BASE_PWM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PWM)
+#define MM_IO_BASE_VINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VINTC)
+#define MM_IO_BASE_GPIO0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO0)
+#define MM_IO_BASE_GPIO1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO1)
+#define MM_IO_BASE_TMR                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TMR)
+#define MM_IO_BASE_WATCHDOG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_WATCHDOG)
+#define MM_IO_BASE_ETM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ETM)
+#define MM_IO_BASE_HPM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM)
+#define MM_IO_BASE_HPM_REMAP           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM_REMAP)
+#define MM_IO_BASE_TZPC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TZPC)
+#define MM_IO_BASE_MPU                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_MPU)
+#define MM_IO_BASE_SPUMP               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUMP)
+#define MM_IO_BASE_PKA                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PKA)
+#define MM_IO_BASE_RNG                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_RNG)
+#define MM_IO_BASE_KEYC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_KEYC)
+#define MM_IO_BASE_BBL                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BBL)
+#define MM_IO_BASE_OTP                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_OTP)
+#define MM_IO_BASE_I2S0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S0)
+#define MM_IO_BASE_I2S1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S1)
+#define MM_IO_BASE_UARTA               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTA)
+#define MM_IO_BASE_UARTB               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTB)
+#define MM_IO_BASE_I2CH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CH)
+#define MM_IO_BASE_SPIH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIH)
+#define MM_IO_BASE_TSC                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TSC)
+#define MM_IO_BASE_I2CS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CS)
+#define MM_IO_BASE_SPIS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIS)
+#define MM_IO_BASE_SINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SINTC)
+#define MM_IO_BASE_INTC0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC0)
+#define MM_IO_BASE_INTC1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC1)
+#define MM_IO_BASE_GE                  MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GE)
+#define MM_IO_BASE_USB_CTLR0           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR0)
+#define MM_IO_BASE_USB_CTLR1           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR1)
+#define MM_IO_BASE_USB_PHY             MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_PHY)
+#define MM_IO_BASE_SDIOH0              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH0)
+#define MM_IO_BASE_SDIOH1              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH1)
+#define MM_IO_BASE_VDEC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VDEC)
+
+#define MM_IO_BASE_VPM_EXTMEM_RSVD     MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_EXTMEM_RSVD)
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_IO_H */
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
new file mode 100644
index 00000000000..114f942bb4f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <cfg_global.h>
+
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+
+#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE
+
+/*
+ * Maximum DMA memory allowed is 14M
+ */
+#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/memory_settings.h b/arch/arm/mach-bcmring/include/mach/memory_settings.h
new file mode 100644
index 00000000000..ce5cd16f2ac
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory_settings.h
@@ -0,0 +1,67 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef MEMORY_SETTINGS_H
+#define MEMORY_SETTINGS_H
+
+/* ---- Include Files ---------------------------------------- */
+/* ---- Constants and Types ---------------------------------- */
+
+/* Memory devices */
+/* NAND Flash timing for 166 MHz setting */
+#define HW_CFG_NAND_tBTA  (5 << 16)	/* Bus turnaround cycle (n)        0-7  (30 ns) */
+#define HW_CFG_NAND_tWP   (4 << 11)	/* Write pulse width cycle (n+1)   0-31 (25 ns) */
+#define HW_CFG_NAND_tWR   (1 << 9)	/* Write recovery cycle (n+1)      0-3  (10 ns) */
+#define HW_CFG_NAND_tAS   (0 << 7)	/* Write address setup cycle (n+1) 0-3  ( 0 ns) */
+#define HW_CFG_NAND_tOE   (3 << 5)	/* Output enable delay cycle (n)   0-3  (15 ns) */
+#define HW_CFG_NAND_tRC   (7 << 0)	/* Read access cycle (n+2)         0-31 (50 ns) */
+
+#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \
+	| HW_CFG_NAND_tWP  \
+	| HW_CFG_NAND_tWR  \
+	| HW_CFG_NAND_tAS  \
+	| HW_CFG_NAND_tOE  \
+	| HW_CFG_NAND_tRC)
+
+/* NOR Flash timing for 166 MHz setting */
+#define HW_CFG_NOR_TPRC_TWLC (0 << 19)	/* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */
+#define HW_CFG_NOR_TBTA      (0 << 16)	/* Bus turnaround cycle (n)                                 (DNA)      */
+#define HW_CFG_NOR_TWP       (6 << 11)	/* Write pulse width cycle (n+1)                            (35ns)     */
+#define HW_CFG_NOR_TWR       (0 << 9)	/* Write recovery cycle (n+1)                               (0ns)      */
+#define HW_CFG_NOR_TAS       (0 << 7)	/* Write address setup cycle (n+1)                          (0ns)      */
+#define HW_CFG_NOR_TOE       (0 << 5)	/* Output enable delay cycle (n)                            (max 25ns) */
+#define HW_CFG_NOR_TRC_TLC   (0x10 << 0)	/* Read access cycle / Burst read latency (n+2 / n+1)       (100ns)    */
+
+#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \
+	| HW_CFG_NOR_TBTA      \
+	| HW_CFG_NOR_TWP       \
+	| HW_CFG_NOR_TWR       \
+	| HW_CFG_NOR_TAS       \
+	| HW_CFG_NOR_TOE       \
+	| HW_CFG_NOR_TRC_TLC)
+
+#define HW_CFG_FLASH1_TCR    HW_CFG_FLASH0_TCR
+#define HW_CFG_FLASH2_TCR    HW_CFG_FLASH0_TCR
+
+/* SDRAM Settings */
+/* #define HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
+/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
+/* #define HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
+/* #define HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
+#define HW_CFG_SDRAM_SIZE_BYTES         0x10000000	/* Total memory, not per device size */
+
+/* ---- Variable Externs ------------------------------------- */
+/* ---- Function Prototypes ---------------------------------- */
+
+#endif /* MEMORY_SETTINGS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
new file mode 100644
index 00000000000..35e2ead8395
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -0,0 +1,25 @@
+/*
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Move VMALLOC_END to 0xf0000000 so that the vm space can range from
+ * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
+ * larger physical memory designs better.
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
new file mode 100644
index 00000000000..0f1c37e4523
--- /dev/null
+++ b/arch/arm/mach-bcmring/mm.c
@@ -0,0 +1,56 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+#define IO_DESC(va, sz) { .virtual = va, \
+	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+	.length = sz, \
+	.type = MT_DEVICE }
+
+#define MEM_DESC(va, sz) { .virtual = va, \
+	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+	.length = sz, \
+	.type = MT_MEMORY }
+
+static struct map_desc bcmring_io_desc[] __initdata = {
+	IO_DESC(MM_IO_BASE_NAND, SZ_64K),	/* phys:0x28000000-0x28000FFF  virt:0xE8000000-0xE8000FFF  size:0x00010000 */
+	IO_DESC(MM_IO_BASE_UMI, SZ_64K),	/* phys:0x2C000000-0x2C000FFF  virt:0xEC000000-0xEC000FFF  size:0x00010000 */
+
+	IO_DESC(MM_IO_BASE_BROM, SZ_64K),	/* phys:0x30000000-0x3000FFFF  virt:0xF3000000-0xF300FFFF  size:0x00010000 */
+	MEM_DESC(MM_IO_BASE_ARAM, SZ_1M),	/* phys:0x31000000-0x31FFFFFF  virt:0xF3100000-0xF31FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_DMA0, SZ_1M),	/* phys:0x32000000-0x32FFFFFF  virt:0xF3200000-0xF32FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_DMA1, SZ_1M),	/* phys:0x33000000-0x33FFFFFF  virt:0xF3300000-0xF33FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_ESW, SZ_1M),	/* phys:0x34000000-0x34FFFFFF  virt:0xF3400000-0xF34FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_CLCD, SZ_1M),	/* phys:0x35000000-0x35FFFFFF  virt:0xF3500000-0xF35FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_APM, SZ_1M),	/* phys:0x36000000-0x36FFFFFF  virt:0xF3600000-0xF36FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_SPUM, SZ_1M),	/* phys:0x37000000-0x37FFFFFF  virt:0xF3700000-0xF37FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_PROG, SZ_1M),	/* phys:0x38000000-0x38FFFFFF  virt:0xF3800000-0xF38FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_DATA, SZ_1M),	/* phys:0x3A000000-0x3AFFFFFF  virt:0xF3A00000-0xF3AFFFFF  size:0x01000000 */
+
+	IO_DESC(MM_IO_BASE_VRAM, SZ_64K),	/* phys:0x40000000-0x4000FFFF  virt:0xF4000000-0xF400FFFF  size:0x00010000 */
+	IO_DESC(MM_IO_BASE_CHIPC, SZ_16M),	/* phys:0x80000000-0x80FFFFFF  virt:0xF8000000-0xF8FFFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_EXTMEM_RSVD,
+		SZ_16M),	/* phys:0x0F000000-0x0FFFFFFF  virt:0xF0000000-0xF0FFFFFF  size:0x01000000 */
+};
+
+void __init bcmring_map_io(void)
+{
+
+	iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+}
-- 
GitLab


From 7c4c2951c0077eecf9a9dfda59a43eedd09a01f4 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:00:39 +0100
Subject: [PATCH 210/257] ARM: 5647/1: bcmring: add bcmring dma.h and
 dma_device.c

add bcmring dma.h and dma_device.c

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/dma_device.c       | 593 ++++++++++++++++
 arch/arm/mach-bcmring/include/mach/dma.h | 826 +++++++++++++++++++++++
 2 files changed, 1419 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/dma_device.c
 create mode 100644 arch/arm/mach-bcmring/include/mach/dma.h

diff --git a/arch/arm/mach-bcmring/dma_device.c b/arch/arm/mach-bcmring/dma_device.c
new file mode 100644
index 00000000000..ca0ad736870
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma_device.c
@@ -0,0 +1,593 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma_device.c
+*
+*   @brief  private array of DMA_DeviceAttribute_t
+*/
+/****************************************************************************/
+
+DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = {
+	[DMA_DEVICE_MEM_TO_MEM] =	/* MEM 2 MEM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "mem-to-mem",
+	 .config = {
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+
+		    },
+	 },
+	[DMA_DEVICE_VPM_MEM_TO_MEM] =	/* VPM */
+	{
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR,
+	 .name = "vpm",
+	 .dedicatedController = 0,
+	 .dedicatedChannel = 0,
+	 /* reserve DMA0:0 for VPM */
+	 },
+	[DMA_DEVICE_NAND_MEM_TO_MEM] =	/* NAND */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "nand",
+	 .config = {
+		    .srcPeripheralPort = 0,
+		    .dstPeripheralPort = 0,
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_6,
+		    },
+	 },
+	[DMA_DEVICE_PIF_MEM_TO_DEV] =	/* PIF TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+	 | DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+	 .name = "pif_tx",
+	 .dmacPort = {14, 5},
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    /* dstPeripheralPort          = 5 or 14 */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .maxDataPerBlock = 16256,
+		    },
+	 },
+	[DMA_DEVICE_PIF_DEV_TO_MEM] =	/* PIF RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+	 /* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */
+	 | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+	 .name = "pif_rx",
+	 .dmacPort = {14, 5},
+	 .config = {
+		    /* srcPeripheralPort          = 5 or 14 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .maxDataPerBlock = 16256,
+		    },
+	 },
+	[DMA_DEVICE_I2S0_DEV_TO_MEM] =	/* I2S RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "i2s0_rx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: I2S0 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_I2S0_MEM_TO_DEV] =	/* I2S TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "i2s0_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 1,	/* DST: I2S0 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_I2S1_DEV_TO_MEM] =	/* I2S1 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "i2s1_rx",
+	 .config = {
+		    .srcPeripheralPort = 2,	/* SRC: I2S1 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_I2S1_MEM_TO_DEV] =	/* I2S1 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "i2s1_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 3,	/* DST: I2S1 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_ESW_MEM_TO_DEV] =	/* ESW TX */
+	{
+	 .name = "esw_tx",
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+	 .dedicatedController = 1,
+	 .dedicatedChannel = 3,
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 1,	/* DST: ESW (MTP) */
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    /* DMAx_AHB_SSTATARy */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    /* DMAx_AHB_DSTATARy */
+		    .dstStatusRegisterAddress = 0x30490010,
+		    /* DMAx_AHB_CFGy */
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    /* DMAx_AHB_CTLy */
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    },
+	 },
+	[DMA_DEVICE_ESW_DEV_TO_MEM] =	/* ESW RX */
+	{
+	 .name = "esw_rx",
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+	 .dedicatedController = 1,
+	 .dedicatedChannel = 2,
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: ESW (PTM) */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    /* DMAx_AHB_SSTATARy */
+		    .srcStatusRegisterAddress = 0x30480010,
+		    /* DMAx_AHB_DSTATARy */
+		    .dstStatusRegisterAddress = 0x00000000,
+		    /* DMAx_AHB_CFGy */
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    /* DMAx_AHB_CTLy */
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] =	/* APM Codec A Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_a_rx",
+	 .config = {
+		    .srcPeripheralPort = 2,	/* SRC: Codec A Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] =	/* APM Codec A Egress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_a_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 3,	/* DST: Codec A Egress FIFO */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] =	/* APM Codec B Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_b_rx",
+	 .config = {
+		    .srcPeripheralPort = 4,	/* SRC: Codec B Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] =	/* APM Codec B Egress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_b_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 5,	/* DST: Codec B Egress FIFO */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] =	/* APM Codec C Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "apm_c_rx",
+	 .config = {
+		    .srcPeripheralPort = 4,	/* SRC: Codec C Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM0_DEV_TO_MEM] =	/* PCM0 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "pcm0_rx",
+	 .config = {
+		    .srcPeripheralPort = 12,	/* SRC: PCM0 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM0_MEM_TO_DEV] =	/* PCM0 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "pcm0_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 13,	/* DST: PCM0 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM1_DEV_TO_MEM] =	/* PCM1 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "pcm1_rx",
+	 .config = {
+		    .srcPeripheralPort = 14,	/* SRC: PCM1 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM1_MEM_TO_DEV] =	/* PCM1 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "pcm1_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 15,	/* DST: PCM1 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_SPUM_DEV_TO_MEM] =	/* SPUM RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "spum_rx",
+	 .config = {
+		    .srcPeripheralPort = 6,	/* SRC: Codec A Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    /* Busrt size **MUST** be 16 for SPUM to work */
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    /* on the RX side, SPU needs to be the flow controller */
+		    .flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL,
+		    },
+	 },
+	[DMA_DEVICE_SPUM_MEM_TO_DEV] =	/* SPUM TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "spum_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 7,	/* DST: SPUM */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    /* Busrt size **MUST** be 16 for SPUM to work */
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_MEM_TO_VRAM] =	/* MEM 2 VRAM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "mem-to-vram",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    },
+	 },
+	[DMA_DEVICE_VRAM_TO_MEM] =	/* VRAM 2 MEM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "vram-to-mem",
+	 .config = {
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    },
+	 },
+};
+EXPORT_SYMBOL(DMA_gDeviceAttribute);	/* primarily for dma-test.c */
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
new file mode 100644
index 00000000000..847980c85c8
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -0,0 +1,826 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma.h
+*
+*   @brief  API definitions for the linux DMA interface.
+*/
+/****************************************************************************/
+
+#if !defined(ASM_ARM_ARCH_BCMRING_DMA_H)
+#define ASM_ARM_ARCH_BCMRING_DMA_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/semaphore.h>
+#include <csp/dmacHw.h>
+#include <mach/timer.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+
+/* If DMA_DEBUG_TRACK_RESERVATION is set to a non-zero value, then the filename */
+/* and line number of the reservation request will be recorded in the channel table */
+
+#define DMA_DEBUG_TRACK_RESERVATION   1
+
+#define DMA_NUM_CONTROLLERS     2
+#define DMA_NUM_CHANNELS        8	/* per controller */
+
+typedef enum {
+	DMA_DEVICE_MEM_TO_MEM,	/* For memory to memory transfers */
+	DMA_DEVICE_I2S0_DEV_TO_MEM,
+	DMA_DEVICE_I2S0_MEM_TO_DEV,
+	DMA_DEVICE_I2S1_DEV_TO_MEM,
+	DMA_DEVICE_I2S1_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM,
+	DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM,
+	DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM,	/* Additional mic input for beam-forming */
+	DMA_DEVICE_APM_PCM0_DEV_TO_MEM,
+	DMA_DEVICE_APM_PCM0_MEM_TO_DEV,
+	DMA_DEVICE_APM_PCM1_DEV_TO_MEM,
+	DMA_DEVICE_APM_PCM1_MEM_TO_DEV,
+	DMA_DEVICE_SPUM_DEV_TO_MEM,
+	DMA_DEVICE_SPUM_MEM_TO_DEV,
+	DMA_DEVICE_SPIH_DEV_TO_MEM,
+	DMA_DEVICE_SPIH_MEM_TO_DEV,
+	DMA_DEVICE_UART_A_DEV_TO_MEM,
+	DMA_DEVICE_UART_A_MEM_TO_DEV,
+	DMA_DEVICE_UART_B_DEV_TO_MEM,
+	DMA_DEVICE_UART_B_MEM_TO_DEV,
+	DMA_DEVICE_PIF_MEM_TO_DEV,
+	DMA_DEVICE_PIF_DEV_TO_MEM,
+	DMA_DEVICE_ESW_DEV_TO_MEM,
+	DMA_DEVICE_ESW_MEM_TO_DEV,
+	DMA_DEVICE_VPM_MEM_TO_MEM,
+	DMA_DEVICE_CLCD_MEM_TO_MEM,
+	DMA_DEVICE_NAND_MEM_TO_MEM,
+	DMA_DEVICE_MEM_TO_VRAM,
+	DMA_DEVICE_VRAM_TO_MEM,
+
+	/* Add new entries before this line. */
+
+	DMA_NUM_DEVICE_ENTRIES,
+	DMA_DEVICE_NONE = 0xff,	/* Special value to indicate that no device is currently assigned. */
+
+} DMA_Device_t;
+
+/****************************************************************************
+*
+*   The DMA_Handle_t is the primary object used by callers of the API.
+*
+*****************************************************************************/
+
+#define DMA_INVALID_HANDLE  ((DMA_Handle_t) -1)
+
+typedef int DMA_Handle_t;
+
+/****************************************************************************
+*
+*   The DMA_DescriptorRing_t contains a ring of descriptors which is used
+*   to point to regions of memory.
+*
+*****************************************************************************/
+
+typedef struct {
+	void *virtAddr;		/* Virtual Address of the descriptor ring */
+	dma_addr_t physAddr;	/* Physical address of the descriptor ring */
+	int descriptorsAllocated;	/* Number of descriptors allocated in the descriptor ring */
+	size_t bytesAllocated;	/* Number of bytes allocated in the descriptor ring */
+
+} DMA_DescriptorRing_t;
+
+/****************************************************************************
+*
+*   The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
+*   DMA chains from a variety of memory sources.
+*
+*****************************************************************************/
+
+#define DMA_MEM_MAP_MIN_SIZE    4096	/* Pages less than this size are better */
+					/* off not being DMA'd. */
+
+typedef enum {
+	DMA_MEM_TYPE_NONE,	/* Not a valid setting */
+	DMA_MEM_TYPE_VMALLOC,	/* Memory came from vmalloc call */
+	DMA_MEM_TYPE_KMALLOC,	/* Memory came from kmalloc call */
+	DMA_MEM_TYPE_DMA,	/* Memory came from dma_alloc_xxx call */
+	DMA_MEM_TYPE_USER,	/* Memory came from user space. */
+
+} DMA_MemType_t;
+
+/* A segment represents a physically and virtually contiguous chunk of memory. */
+/* i.e. each segment can be DMA'd */
+/* A user of the DMA code will add memory regions. Each region may need to be */
+/* represented by one or more segments. */
+
+typedef struct {
+	void *virtAddr;		/* Virtual address used for this segment */
+	dma_addr_t physAddr;	/* Physical address this segment maps to */
+	size_t numBytes;	/* Size of the segment, in bytes */
+
+} DMA_Segment_t;
+
+/* A region represents a virtually contiguous chunk of memory, which may be */
+/* made up of multiple segments. */
+
+typedef struct {
+	DMA_MemType_t memType;
+	void *virtAddr;
+	size_t numBytes;
+
+	/* Each region (virtually contiguous) consists of one or more segments. Each */
+	/* segment is virtually and physically contiguous. */
+
+	int numSegmentsUsed;
+	int numSegmentsAllocated;
+	DMA_Segment_t *segment;
+
+	/* When a region corresponds to user memory, we need to lock all of the pages */
+	/* down before we can figure out the physical addresses. The lockedPage array contains */
+	/* the pages that were locked, and which subsequently need to be unlocked once the */
+	/* memory is unmapped. */
+
+	unsigned numLockedPages;
+	struct page **lockedPages;
+
+} DMA_Region_t;
+
+typedef struct {
+	int inUse;		/* Is this mapping currently being used? */
+	struct semaphore lock;	/* Acquired when using this structure */
+	enum dma_data_direction dir;	/* Direction this transfer is intended for */
+
+	/* In the event that we're mapping user memory, we need to know which task */
+	/* the memory is for, so that we can obtain the correct mm locks. */
+
+	struct task_struct *userTask;
+
+	int numRegionsUsed;
+	int numRegionsAllocated;
+	DMA_Region_t *region;
+
+} DMA_MemMap_t;
+
+/****************************************************************************
+*
+*   The DMA_DeviceAttribute_t contains information which describes a
+*   particular DMA device (or peripheral).
+*
+*   It is anticipated that the arrary of DMA_DeviceAttribute_t's will be
+*   statically initialized.
+*
+*****************************************************************************/
+
+/* The device handler is called whenever a DMA operation completes. The reaon */
+/* for it to be called will be a bitmask with one or more of the following bits */
+/* set. */
+
+#define DMA_HANDLER_REASON_BLOCK_COMPLETE       dmacHw_INTERRUPT_STATUS_BLOCK
+#define DMA_HANDLER_REASON_TRANSFER_COMPLETE    dmacHw_INTERRUPT_STATUS_TRANS
+#define DMA_HANDLER_REASON_ERROR                dmacHw_INTERRUPT_STATUS_ERROR
+
+typedef void (*DMA_DeviceHandler_t) (DMA_Device_t dev, int reason,
+				     void *userData);
+
+#define DMA_DEVICE_FLAG_ON_DMA0             0x00000001
+#define DMA_DEVICE_FLAG_ON_DMA1             0x00000002
+#define DMA_DEVICE_FLAG_PORT_PER_DMAC       0x00000004	/* If set, it means that the port used on DMAC0 is different from the port used on DMAC1 */
+#define DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST    0x00000008	/* If set, allocate from DMA1 before allocating from DMA0 */
+#define DMA_DEVICE_FLAG_IS_DEDICATED        0x00000100
+#define DMA_DEVICE_FLAG_NO_ISR              0x00000200
+#define DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO    0x00000400
+#define DMA_DEVICE_FLAG_IN_USE              0x00000800	/* If set, device is in use on a channel */
+
+/* Note: Some DMA devices can be used from multiple DMA Controllers. The bitmask is used to */
+/*       determine which DMA controllers a given device can be used from, and the interface */
+/*       array determeines the actual interface number to use for a given controller. */
+
+typedef struct {
+	uint32_t flags;		/* Bitmask of DMA_DEVICE_FLAG_xxx constants */
+	uint8_t dedicatedController;	/* Controller number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+	uint8_t dedicatedChannel;	/* Channel number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+	const char *name;	/* Will show up in the /proc entry */
+
+	uint32_t dmacPort[DMA_NUM_CONTROLLERS];	/* Specifies the port number when DMA_DEVICE_FLAG_PORT_PER_DMAC flag is set */
+
+	dmacHw_CONFIG_t config;	/* Configuration to use when DMA'ing using this device */
+
+	void *userData;		/* Passed to the devHandler */
+	DMA_DeviceHandler_t devHandler;	/* Called when DMA operations finish. */
+
+	timer_tick_count_t transferStartTime;	/* Time the current transfer was started */
+
+	/* The following statistical information will be collected and presented in a proc entry. */
+	/* Note: With a contiuous bandwidth of 1 Gb/sec, it would take 584 years to overflow */
+	/*       a 64 bit counter. */
+
+	uint64_t numTransfers;	/* Number of DMA transfers performed */
+	uint64_t transferTicks;	/* Total time spent doing DMA transfers (measured in timer_tick_count_t's) */
+	uint64_t transferBytes;	/* Total bytes transferred */
+	uint32_t timesBlocked;	/* Number of times a channel was unavailable */
+	uint32_t numBytes;	/* Last transfer size */
+
+	/* It's not possible to free memory which is allocated for the descriptors from within */
+	/* the ISR. So make the presumption that a given device will tend to use the */
+	/* same sized buffers over and over again, and we keep them around. */
+
+	DMA_DescriptorRing_t ring;	/* Ring of descriptors allocated for this device */
+
+	/* We stash away some of the information from the previous transfer. If back-to-back */
+	/* transfers are performed from the same buffer, then we don't have to keep re-initializing */
+	/* the descriptor buffers. */
+
+	uint32_t prevNumBytes;
+	dma_addr_t prevSrcData;
+	dma_addr_t prevDstData;
+
+} DMA_DeviceAttribute_t;
+
+/****************************************************************************
+*
+*   DMA_Channel_t, DMA_Controller_t, and DMA_State_t are really internal
+*   data structures and don't belong in this header file, but are included
+*   merely for discussion.
+*
+*   By the time this is implemented, these structures will be moved out into
+*   the appropriate C source file instead.
+*
+*****************************************************************************/
+
+/****************************************************************************
+*
+*   The DMA_Channel_t contains state information about each DMA channel. Some
+*   of the channels are dedicated. Non-dedicated channels are shared
+*   amongst the other devices.
+*
+*****************************************************************************/
+
+#define DMA_CHANNEL_FLAG_IN_USE         0x00000001
+#define DMA_CHANNEL_FLAG_IS_DEDICATED   0x00000002
+#define DMA_CHANNEL_FLAG_NO_ISR         0x00000004
+#define DMA_CHANNEL_FLAG_LARGE_FIFO     0x00000008
+
+typedef struct {
+	uint32_t flags;		/* bitmask of DMA_CHANNEL_FLAG_xxx constants */
+	DMA_Device_t devType;	/* Device this channel is currently reserved for */
+	DMA_Device_t lastDevType;	/* Device type that used this previously */
+	char name[20];		/* Name passed onto request_irq */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+	const char *fileName;	/* Place where channel reservation took place */
+	int lineNum;		/* Place where channel reservation took place */
+#endif
+	dmacHw_HANDLE_t dmacHwHandle;	/* low level channel handle. */
+
+} DMA_Channel_t;
+
+/****************************************************************************
+*
+*   The DMA_Controller_t contains state information about each DMA controller.
+*
+*   The freeChannelQ is stored in the controller data structure rather than
+*   the channel data structure since several of the devices are accessible
+*   from multiple controllers, and there is no way to know which controller
+*   will become available first.
+*
+*****************************************************************************/
+
+typedef struct {
+	DMA_Channel_t channel[DMA_NUM_CHANNELS];
+
+} DMA_Controller_t;
+
+/****************************************************************************
+*
+*   The DMA_Global_t contains all of the global state information used by
+*   the DMA code.
+*
+*   Callers which need to allocate a shared channel will be queued up
+*   on the freeChannelQ until a channel becomes available.
+*
+*****************************************************************************/
+
+typedef struct {
+	struct semaphore lock;	/* acquired when manipulating table entries */
+	wait_queue_head_t freeChannelQ;
+
+	DMA_Controller_t controller[DMA_NUM_CONTROLLERS];
+
+} DMA_Global_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+
+extern DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES];
+
+/* ---- Function Prototypes ---------------------------------------------- */
+
+#if defined(__KERNEL__)
+
+/****************************************************************************/
+/**
+*   Initializes the DMA module.
+*
+*   @return
+*       0       - Success
+*       < 0     - Error
+*/
+/****************************************************************************/
+
+int dma_init(void);
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg(DMA_Device_t dev, const char *fileName,
+				     int lineNum);
+#define dma_request_channel(dev)  dma_request_channel_dbg(dev, __FILE__, __LINE__)
+#else
+
+/****************************************************************************/
+/**
+*   Reserves a channel for use with @a dev. If the device is setup to use
+*   a shared channel, then this function will block until a free channel
+*   becomes available.
+*
+*   @return
+*       >= 0    - A valid DMA Handle.
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+DMA_Handle_t dma_request_channel(DMA_Device_t dev	/* Device to use with the allocated channel. */
+    );
+#endif
+
+/****************************************************************************/
+/**
+*   Frees a previously allocated DMA Handle.
+*
+*   @return
+*        0      - DMA Handle was released successfully.
+*       -EINVAL - Invalid DMA handle
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t channel	/* DMA handle. */
+    );
+
+/****************************************************************************/
+/**
+*   Determines if a given device has been configured as using a shared
+*   channel.
+*
+*   @return boolean
+*       0           Device uses a dedicated channel
+*       non-zero    Device uses a shared channel
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t dev	/* Device to check. */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates memory to hold a descriptor ring. The descriptor ring then
+*   needs to be populated by making one or more calls to
+*   dna_add_descriptors.
+*
+*   The returned descriptor ring will be automatically initialized.
+*
+*   @return
+*       0           Descriptor ring was allocated successfully
+*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
+			      int numDescriptors	/* Number of descriptors that need to be allocated. */
+    );
+
+/****************************************************************************/
+/**
+*   Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
+    );
+
+/****************************************************************************/
+/**
+*   Initializes a descriptor ring, so that descriptors can be added to it.
+*   Once a descriptor ring has been allocated, it may be reinitialized for
+*   use with additional/different regions of memory.
+*
+*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
+*   initialize the ring with a smaller number of descriptors. The amount
+*   of memory allocated for the descriptor ring will not be reduced, and
+*   the descriptor ring may be reinitialized later
+*
+*   @return
+*       0           Descriptor ring was initialized successfully
+*       -ENOMEM     The descriptor which was passed in has insufficient space
+*                   to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
+			     int numDescriptors	/* Number of descriptors to initialize. */
+    );
+
+/****************************************************************************/
+/**
+*   Determines the number of descriptors which would be required for a
+*   transfer of the indicated memory region.
+*
+*   This function also needs to know which DMA device this transfer will
+*   be destined for, so that the appropriate DMA configuration can be retrieved.
+*   DMA parameters such as transfer width, and whether this is a memory-to-memory
+*   or memory-to-peripheral, etc can all affect the actual number of descriptors
+*   required.
+*
+*   @return
+*       > 0     Returns the number of descriptors required for the indicated transfer
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
+				   dma_addr_t srcData,	/* Place to get data to write to device */
+				   dma_addr_t dstData,	/* Pointer to device data address */
+				   size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to the descriptor ring. Note that it may take
+*   multiple descriptors for each region of memory. It is the callers
+*   responsibility to allocate a sufficiently large descriptor ring.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
+			DMA_Device_t device,	/* DMA Device that descriptors are for */
+			dma_addr_t srcData,	/* Place to get data (memory or device) */
+			dma_addr_t dstData,	/* Place to put data (memory or device) */
+			size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Sets the descriptor ring associated with a device.
+*
+*   Once set, the descriptor ring will be associated with the device, even
+*   across channel request/free calls. Passing in a NULL descriptor ring
+*   will release any descriptor ring currently associated with the device.
+*
+*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+*         the descriptor ring may be released and reallocated.
+*
+*   Note: This function will release the descriptor memory for any current
+*         descriptor ring associated with this device.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
+    );
+
+/****************************************************************************/
+/**
+*   Retrieves the descriptor ring associated with a device.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates buffers for the descriptors. This is normally done automatically
+*   but needs to be done explicitly when initiating a dma from interrupt
+*   context.
+*
+*   @return
+*       0       Descriptors were allocated successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+			  dma_addr_t srcData,	/* Place to get data to write to device */
+			  dma_addr_t dstData,	/* Pointer to device data address */
+			  size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates and sets up descriptors for a double buffered circular buffer.
+*
+*   This is primarily intended to be used for things like the ingress samples
+*   from a microphone.
+*
+*   @return
+*       > 0     Number of descriptors actually allocated.
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+				     dma_addr_t srcData,	/* Physical address of source data */
+				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
+				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
+				     size_t numBytes	/* Number of bytes in each destination buffer */
+    );
+
+/****************************************************************************/
+/**
+*   Initializes a DMA_MemMap_t data structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap	/* Stores state information about the map */
+    );
+
+/****************************************************************************/
+/**
+*   Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap	/* Stores state information about the map */
+    );
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and categorizes it.
+*
+*   @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr);
+
+/****************************************************************************/
+/**
+*   Sets the process (aka userTask) associated with a mem map. This is
+*   required if user-mode segments will be added to the mapping.
+*/
+/****************************************************************************/
+
+static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
+					     struct task_struct *task)
+{
+	memMap->userTask = task;
+}
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and determines if we support DMA'ing to/from
+*   that type of memory.
+*
+*   @return boolean -
+*               return value != 0 means dma supported
+*               return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr);
+
+/****************************************************************************/
+/**
+*   Initializes a memory map for use. Since this function acquires a
+*   sempaphore within the memory map, it is VERY important that dma_unmap
+*   be called when you're finished using the map.
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		  enum dma_data_direction dir	/* Direction that the mapping will be going */
+    );
+
+/****************************************************************************/
+/**
+*   Adds a segment of memory to a memory map.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		       void *mem,	/* Virtual address that we want to get a map of */
+		       size_t numBytes	/* Number of bytes being mapped */
+    );
+
+/****************************************************************************/
+/**
+*   Creates a descriptor ring from a memory mapping.
+*
+*   @return 0 on sucess, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev,	/* DMA device (where the ring is stored) */
+				   DMA_MemMap_t *memMap,	/* Memory map that will be used */
+				   dma_addr_t devPhysAddr	/* Physical address of device */
+    );
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		void *addr,	/* Virtual address that we want to get a map of */
+		size_t count,	/* Number of bytes being mapped */
+		enum dma_data_direction dir	/* Direction that the mapping will be going */
+    );
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+	      int dirtied	/* non-zero if any of the pages were modified */
+    );
+
+/****************************************************************************/
+/**
+*   Initiates a transfer when the descriptors have already been setup.
+*
+*   This is a special case, and normally, the dma_transfer_xxx functions should
+*   be used.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Stops a previously started DMA transfer.
+*
+*   @return
+*       0       Transfer was stopped successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Waits for a DMA to complete by polling. This function is only intended
+*   to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Initiates a DMA transfer
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
+		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+		 dma_addr_t srcData,	/* Place to get data to write to device */
+		 dma_addr_t dstData,	/* Pointer to device data address */
+		 size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Initiates a transfer from memory to a device.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_to_device(DMA_Handle_t handle,	/* DMA Handle */
+					 dma_addr_t srcData,	/* Place to get data to write to device (physical address) */
+					 dma_addr_t dstData,	/* Pointer to device data address (physical address) */
+					 size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Initiates a transfer from a device to memory.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_from_device(DMA_Handle_t handle,	/* DMA Handle */
+					   dma_addr_t srcData,	/* Pointer to the device data address (physical address) */
+					   dma_addr_t dstData,	/* Place to store data retrieved from the device (physical address) */
+					   size_t numBytes	/* Number of bytes to retrieve from the device */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Initiates a memory to memory transfer.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device wasn't DMA_DEVICE_MEM_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_mem_to_mem(DMA_Handle_t handle,	/* DMA Handle */
+					  dma_addr_t srcData,	/* Place to transfer data from (physical address) */
+					  dma_addr_t dstData,	/* Place to transfer data to (physical address) */
+					  size_t numBytes	/* Number of bytes to transfer */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Set the callback function which will be called when a transfer completes.
+*   If a NULL callback function is set, then no callback will occur.
+*
+*   @note   @a devHandler will be called from IRQ context.
+*
+*   @return
+*       0       - Success
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
+			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
+			   void *userData	/* Pointer which will be passed to devHandler. */
+    );
+
+#endif
+
+#endif /* ASM_ARM_ARCH_BCMRING_DMA_H */
-- 
GitLab


From 859277f7dbf8b48016d55ea2171d04eed074d858 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:01:13 +0100
Subject: [PATCH 211/257] ARM: 5648/1: bcmring: add bmcring dma.c

implement dma support for bcmring

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/dma.c | 2321 +++++++++++++++++++++++++++++++++++
 1 file changed, 2321 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/dma.c

diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
new file mode 100644
index 00000000000..7b20fccb9d4
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma.c
@@ -0,0 +1,2321 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma.c
+*
+*   @brief  Implements the DMA interface.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/proc_fs.h>
+
+#include <mach/timer.h>
+
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <asm/atomic.h>
+#include <mach/dma.h>
+
+/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
+/* especially since dc4 doesn't use kmalloc'd memory. */
+
+#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
+
+/* ---- Public Variables ------------------------------------------------- */
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#define MAKE_HANDLE(controllerIdx, channelIdx)    (((controllerIdx) << 4) | (channelIdx))
+
+#define CONTROLLER_FROM_HANDLE(handle)    (((handle) >> 4) & 0x0f)
+#define CHANNEL_FROM_HANDLE(handle)       ((handle) & 0x0f)
+
+#define DMA_MAP_DEBUG   0
+
+#if DMA_MAP_DEBUG
+#   define  DMA_MAP_PRINT(fmt, args...)   printk("%s: " fmt, __func__,  ## args)
+#else
+#   define  DMA_MAP_PRINT(fmt, args...)
+#endif
+
+/* ---- Private Variables ------------------------------------------------ */
+
+static DMA_Global_t gDMA;
+static struct proc_dir_entry *gDmaDir;
+
+static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
+
+#include "dma_device.c"
+
+/* ---- Private Function Prototypes -------------------------------------- */
+
+/* ---- Functions  ------------------------------------------------------- */
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/mem-type
+*/
+/****************************************************************************/
+
+static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
+				  int count, int *eof, void *data)
+{
+	int len = 0;
+
+	len += sprintf(buf + len, "dma_map_mem statistics\n");
+	len +=
+	    sprintf(buf + len, "coherent: %d\n",
+		    atomic_read(&gDmaStatMemTypeCoherent));
+	len +=
+	    sprintf(buf + len, "kmalloc:  %d\n",
+		    atomic_read(&gDmaStatMemTypeKmalloc));
+	len +=
+	    sprintf(buf + len, "vmalloc:  %d\n",
+		    atomic_read(&gDmaStatMemTypeVmalloc));
+	len +=
+	    sprintf(buf + len, "user:     %d\n",
+		    atomic_read(&gDmaStatMemTypeUser));
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/channels
+*/
+/****************************************************************************/
+
+static int dma_proc_read_channels(char *buf, char **start, off_t offset,
+				  int count, int *eof, void *data)
+{
+	int controllerIdx;
+	int channelIdx;
+	int limit = count - 200;
+	int len = 0;
+	DMA_Channel_t *channel;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			if (len >= limit) {
+				break;
+			}
+
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			len +=
+			    sprintf(buf + len, "%d:%d ", controllerIdx,
+				    channelIdx);
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+			    0) {
+				len +=
+				    sprintf(buf + len, "Dedicated for %s ",
+					    DMA_gDeviceAttribute[channel->
+								 devType].name);
+			} else {
+				len += sprintf(buf + len, "Shared ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) {
+				len += sprintf(buf + len, "No ISR ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) {
+				len += sprintf(buf + len, "Fifo: 128 ");
+			} else {
+				len += sprintf(buf + len, "Fifo: 64  ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+				len +=
+				    sprintf(buf + len, "InUse by %s",
+					    DMA_gDeviceAttribute[channel->
+								 devType].name);
+#if (DMA_DEBUG_TRACK_RESERVATION)
+				len +=
+				    sprintf(buf + len, " (%s:%d)",
+					    channel->fileName,
+					    channel->lineNum);
+#endif
+			} else {
+				len += sprintf(buf + len, "Avail ");
+			}
+
+			if (channel->lastDevType != DMA_DEVICE_NONE) {
+				len +=
+				    sprintf(buf + len, "Last use: %s ",
+					    DMA_gDeviceAttribute[channel->
+								 lastDevType].
+					    name);
+			}
+
+			len += sprintf(buf + len, "\n");
+		}
+	}
+	up(&gDMA.lock);
+	*eof = 1;
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/devices
+*/
+/****************************************************************************/
+
+static int dma_proc_read_devices(char *buf, char **start, off_t offset,
+				 int count, int *eof, void *data)
+{
+	int limit = count - 200;
+	int len = 0;
+	int devIdx;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+		if (devAttr->name == NULL) {
+			continue;
+		}
+
+		if (len >= limit) {
+			break;
+		}
+
+		len += sprintf(buf + len, "%-12s ", devAttr->name);
+
+		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+			len +=
+			    sprintf(buf + len, "Dedicated %d:%d ",
+				    devAttr->dedicatedController,
+				    devAttr->dedicatedChannel);
+		} else {
+			len += sprintf(buf + len, "Shared DMA:");
+			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) {
+				len += sprintf(buf + len, "0");
+			}
+			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) {
+				len += sprintf(buf + len, "1");
+			}
+			len += sprintf(buf + len, " ");
+		}
+		if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) {
+			len += sprintf(buf + len, "NoISR ");
+		}
+		if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) {
+			len += sprintf(buf + len, "Allow-128 ");
+		}
+
+		len +=
+		    sprintf(buf + len,
+			    "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n",
+			    devAttr->numTransfers, devAttr->transferTicks,
+			    devAttr->transferBytes,
+			    devAttr->ring.bytesAllocated);
+
+	}
+
+	up(&gDMA.lock);
+	*eof = 1;
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Determines if a DMA_Device_t is "valid".
+*
+*   @return
+*       TRUE        - dma device is valid
+*       FALSE       - dma device isn't valid
+*/
+/****************************************************************************/
+
+static inline int IsDeviceValid(DMA_Device_t device)
+{
+	return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES);
+}
+
+/****************************************************************************/
+/**
+*   Translates a DMA handle into a pointer to a channel.
+*
+*   @return
+*       non-NULL    - pointer to DMA_Channel_t
+*       NULL        - DMA Handle was invalid
+*/
+/****************************************************************************/
+
+static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle)
+{
+	int controllerIdx;
+	int channelIdx;
+
+	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+	channelIdx = CHANNEL_FROM_HANDLE(handle);
+
+	if ((controllerIdx > DMA_NUM_CONTROLLERS)
+	    || (channelIdx > DMA_NUM_CHANNELS)) {
+		return NULL;
+	}
+	return &gDMA.controller[controllerIdx].channel[channelIdx];
+}
+
+/****************************************************************************/
+/**
+*   Interrupt handler which is called to process DMA interrupts.
+*/
+/****************************************************************************/
+
+static irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int irqStatus;
+
+	channel = (DMA_Channel_t *) dev_id;
+
+	/* Figure out why we were called, and knock down the interrupt */
+
+	irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle);
+	dmacHw_clearInterrupt(channel->dmacHwHandle);
+
+	if ((channel->devType < 0)
+	    || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) {
+		printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n",
+		       channel->devType);
+		return IRQ_NONE;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	/* Update stats */
+
+	if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) {
+		devAttr->transferTicks +=
+		    (timer_get_tick_count() - devAttr->transferStartTime);
+	}
+
+	if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) {
+		printk(KERN_ERR
+		       "dma_interrupt_handler: devType :%d DMA error (%s)\n",
+		       channel->devType, devAttr->name);
+	} else {
+		devAttr->numTransfers++;
+		devAttr->transferBytes += devAttr->numBytes;
+	}
+
+	/* Call any installed handler */
+
+	if (devAttr->devHandler != NULL) {
+		devAttr->devHandler(channel->devType, irqStatus,
+				    devAttr->userData);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/****************************************************************************/
+/**
+*   Allocates memory to hold a descriptor ring. The descriptor ring then
+*   needs to be populated by making one or more calls to
+*   dna_add_descriptors.
+*
+*   The returned descriptor ring will be automatically initialized.
+*
+*   @return
+*       0           Descriptor ring was allocated successfully
+*       -EINVAL     Invalid parameters passed in
+*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
+			      int numDescriptors	/* Number of descriptors that need to be allocated. */
+    ) {
+	size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors);
+
+	if ((ring == NULL) || (numDescriptors <= 0)) {
+		return -EINVAL;
+	}
+
+	ring->physAddr = 0;
+	ring->descriptorsAllocated = 0;
+	ring->bytesAllocated = 0;
+
+	ring->virtAddr = dma_alloc_writecombine(NULL,
+						     bytesToAlloc,
+						     &ring->physAddr,
+						     GFP_KERNEL);
+	if (ring->virtAddr == NULL) {
+		return -ENOMEM;
+	}
+
+	ring->bytesAllocated = bytesToAlloc;
+	ring->descriptorsAllocated = numDescriptors;
+
+	return dma_init_descriptor_ring(ring, numDescriptors);
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
+    ) {
+	if (ring->virtAddr != NULL) {
+		dma_free_writecombine(NULL,
+				      ring->bytesAllocated,
+				      ring->virtAddr, ring->physAddr);
+	}
+
+	ring->bytesAllocated = 0;
+	ring->descriptorsAllocated = 0;
+	ring->virtAddr = NULL;
+	ring->physAddr = 0;
+}
+
+EXPORT_SYMBOL(dma_free_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Initializes a descriptor ring, so that descriptors can be added to it.
+*   Once a descriptor ring has been allocated, it may be reinitialized for
+*   use with additional/different regions of memory.
+*
+*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
+*   initialize the ring with a smaller number of descriptors. The amount
+*   of memory allocated for the descriptor ring will not be reduced, and
+*   the descriptor ring may be reinitialized later
+*
+*   @return
+*       0           Descriptor ring was initialized successfully
+*       -ENOMEM     The descriptor which was passed in has insufficient space
+*                   to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
+			     int numDescriptors	/* Number of descriptors to initialize. */
+    ) {
+	if (ring->virtAddr == NULL) {
+		return -EINVAL;
+	}
+	if (dmacHw_initDescriptor(ring->virtAddr,
+				  ring->physAddr,
+				  ring->bytesAllocated, numDescriptors) < 0) {
+		printk(KERN_ERR
+		       "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_init_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Determines the number of descriptors which would be required for a
+*   transfer of the indicated memory region.
+*
+*   This function also needs to know which DMA device this transfer will
+*   be destined for, so that the appropriate DMA configuration can be retrieved.
+*   DMA parameters such as transfer width, and whether this is a memory-to-memory
+*   or memory-to-peripheral, etc can all affect the actual number of descriptors
+*   required.
+*
+*   @return
+*       > 0     Returns the number of descriptors required for the indicated transfer
+*       -ENODEV - Device handed in is invalid.
+*       -EINVAL Invalid parameters
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
+				   dma_addr_t srcData,	/* Place to get data to write to device */
+				   dma_addr_t dstData,	/* Pointer to device data address */
+				   size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	int numDescriptors;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+							      (void *)srcData,
+							      (void *)dstData,
+							      numBytes);
+	if (numDescriptors < 0) {
+		printk(KERN_ERR
+		       "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n");
+		return -EINVAL;
+	}
+
+	return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_calculate_descriptor_count);
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to the descriptor ring. Note that it may take
+*   multiple descriptors for each region of memory. It is the callers
+*   responsibility to allocate a sufficiently large descriptor ring.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*       -EINVAL Invalid parameters
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
+			DMA_Device_t device,	/* DMA Device that descriptors are for */
+			dma_addr_t srcData,	/* Place to get data (memory or device) */
+			dma_addr_t dstData,	/* Place to put data (memory or device) */
+			size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	int rc;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	rc = dmacHw_setDataDescriptor(&devAttr->config,
+				      ring->virtAddr,
+				      (void *)srcData,
+				      (void *)dstData, numBytes);
+	if (rc < 0) {
+		printk(KERN_ERR
+		       "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n",
+		       rc);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_add_descriptors);
+
+/****************************************************************************/
+/**
+*   Sets the descriptor ring associated with a device.
+*
+*   Once set, the descriptor ring will be associated with the device, even
+*   across channel request/free calls. Passing in a NULL descriptor ring
+*   will release any descriptor ring currently associated with the device.
+*
+*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+*         the descriptor ring may be released and reallocated.
+*
+*   Note: This function will release the descriptor memory for any current
+*         descriptor ring associated with this device.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	/* Free the previously allocated descriptor ring */
+
+	dma_free_descriptor_ring(&devAttr->ring);
+
+	if (ring != NULL) {
+		/* Copy in the new one */
+
+		devAttr->ring = *ring;
+	}
+
+	/* Set things up so that if dma_transfer is called then this descriptor */
+	/* ring will get freed. */
+
+	devAttr->prevSrcData = 0;
+	devAttr->prevDstData = 0;
+	devAttr->prevNumBytes = 0;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Retrieves the descriptor ring associated with a device.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	memset(ring, 0, sizeof(*ring));
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	*ring = devAttr->ring;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_get_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Configures a DMA channel.
+*
+*   @return
+*       >= 0    - Initialization was successfull.
+*
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+static int ConfigChannel(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int controllerIdx;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+
+	if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) {
+		if (devAttr->config.transferType ==
+		    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) {
+			devAttr->config.dstPeripheralPort =
+			    devAttr->dmacPort[controllerIdx];
+		} else if (devAttr->config.transferType ==
+			   dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) {
+			devAttr->config.srcPeripheralPort =
+			    devAttr->dmacPort[controllerIdx];
+		}
+	}
+
+	if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) {
+		printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*   Intializes all of the data structures associated with the DMA.
+*   @return
+*       >= 0    - Initialization was successfull.
+*
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_init(void)
+{
+	int rc = 0;
+	int controllerIdx;
+	int channelIdx;
+	DMA_Device_t devIdx;
+	DMA_Channel_t *channel;
+	DMA_Handle_t dedicatedHandle;
+
+	memset(&gDMA, 0, sizeof(gDMA));
+
+	init_MUTEX_LOCKED(&gDMA.lock);
+	init_waitqueue_head(&gDMA.freeChannelQ);
+
+	/* Initialize the Hardware */
+
+	dmacHw_initDma();
+
+	/* Start off by marking all of the DMA channels as shared. */
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			channel->flags = 0;
+			channel->devType = DMA_DEVICE_NONE;
+			channel->lastDevType = DMA_DEVICE_NONE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+			channel->fileName = "";
+			channel->lineNum = 0;
+#endif
+
+			channel->dmacHwHandle =
+			    dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID
+						    (controllerIdx,
+						     channelIdx));
+			dmacHw_initChannel(channel->dmacHwHandle);
+		}
+	}
+
+	/* Record any special attributes that channels may have */
+
+	gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+
+	/* Now walk through and record the dedicated channels. */
+
+	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+		if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0)
+		    && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) {
+			printk(KERN_ERR
+			       "DMA Device: %s Can only request NO_ISR for dedicated devices\n",
+			       devAttr->name);
+			rc = -EINVAL;
+			goto out;
+		}
+
+		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+			/* This is a dedicated device. Mark the channel as being reserved. */
+
+			if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) {
+				printk(KERN_ERR
+				       "DMA Device: %s DMA Controller %d is out of range\n",
+				       devAttr->name,
+				       devAttr->dedicatedController);
+				rc = -EINVAL;
+				goto out;
+			}
+
+			if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) {
+				printk(KERN_ERR
+				       "DMA Device: %s DMA Channel %d is out of range\n",
+				       devAttr->name,
+				       devAttr->dedicatedChannel);
+				rc = -EINVAL;
+				goto out;
+			}
+
+			dedicatedHandle =
+			    MAKE_HANDLE(devAttr->dedicatedController,
+					devAttr->dedicatedChannel);
+			channel = HandleToChannel(dedicatedHandle);
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+			    0) {
+				printk
+				    ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n",
+				     devAttr->name,
+				     devAttr->dedicatedController,
+				     devAttr->dedicatedChannel,
+				     DMA_gDeviceAttribute[channel->devType].
+				     name);
+				rc = -EBUSY;
+				goto out;
+			}
+
+			channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED;
+			channel->devType = devIdx;
+
+			if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) {
+				channel->flags |= DMA_CHANNEL_FLAG_NO_ISR;
+			}
+
+			/* For dedicated channels, we can go ahead and configure the DMA channel now */
+			/* as well. */
+
+			ConfigChannel(dedicatedHandle);
+		}
+	}
+
+	/* Go through and register the interrupt handlers */
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) {
+				snprintf(channel->name, sizeof(channel->name),
+					 "dma %d:%d %s", controllerIdx,
+					 channelIdx,
+					 channel->devType ==
+					 DMA_DEVICE_NONE ? "" :
+					 DMA_gDeviceAttribute[channel->devType].
+					 name);
+
+				rc =
+				     request_irq(IRQ_DMA0C0 +
+						 (controllerIdx *
+						  DMA_NUM_CHANNELS) +
+						 channelIdx,
+						 dma_interrupt_handler,
+						 IRQF_DISABLED, channel->name,
+						 channel);
+				if (rc != 0) {
+					printk(KERN_ERR
+					       "request_irq for IRQ_DMA%dC%d failed\n",
+					       controllerIdx, channelIdx);
+				}
+			}
+		}
+	}
+
+	/* Create /proc/dma/channels and /proc/dma/devices */
+
+	gDmaDir = create_proc_entry("dma", S_IFDIR | S_IRUGO | S_IXUGO, NULL);
+
+	if (gDmaDir == NULL) {
+		printk(KERN_ERR "Unable to create /proc/dma\n");
+	} else {
+		create_proc_read_entry("channels", 0, gDmaDir,
+				       dma_proc_read_channels, NULL);
+		create_proc_read_entry("devices", 0, gDmaDir,
+				       dma_proc_read_devices, NULL);
+		create_proc_read_entry("mem-type", 0, gDmaDir,
+				       dma_proc_read_mem_type, NULL);
+	}
+
+out:
+
+	up(&gDMA.lock);
+
+	return rc;
+}
+
+/****************************************************************************/
+/**
+*   Reserves a channel for use with @a dev. If the device is setup to use
+*   a shared channel, then this function will block until a free channel
+*   becomes available.
+*
+*   @return
+*       >= 0    - A valid DMA Handle.
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg
+    (DMA_Device_t dev, const char *fileName, int lineNum)
+#else
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+#endif
+{
+	DMA_Handle_t handle;
+	DMA_DeviceAttribute_t *devAttr;
+	DMA_Channel_t *channel;
+	int controllerIdx;
+	int controllerIdx2;
+	int channelIdx;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) {
+		handle = -ENODEV;
+		goto out;
+	}
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+	{
+		char *s;
+
+		s = strrchr(fileName, '/');
+		if (s != NULL) {
+			fileName = s + 1;
+		}
+	}
+#endif
+	if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) {
+		/* This device has already been requested and not been freed */
+
+		printk(KERN_ERR "%s: device %s is already requested\n",
+		       __func__, devAttr->name);
+		handle = -EBUSY;
+		goto out;
+	}
+
+	if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+		/* This device has a dedicated channel. */
+
+		channel =
+		    &gDMA.controller[devAttr->dedicatedController].
+		    channel[devAttr->dedicatedChannel];
+		if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+			handle = -EBUSY;
+			goto out;
+		}
+
+		channel->flags |= DMA_CHANNEL_FLAG_IN_USE;
+		devAttr->flags |= DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+		channel->fileName = fileName;
+		channel->lineNum = lineNum;
+#endif
+		handle =
+		    MAKE_HANDLE(devAttr->dedicatedController,
+				devAttr->dedicatedChannel);
+		goto out;
+	}
+
+	/* This device needs to use one of the shared channels. */
+
+	handle = DMA_INVALID_HANDLE;
+	while (handle == DMA_INVALID_HANDLE) {
+		/* Scan through the shared channels and see if one is available */
+
+		for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS;
+		     controllerIdx2++) {
+			/* Check to see if we should try on controller 1 first. */
+
+			controllerIdx = controllerIdx2;
+			if ((devAttr->
+			     flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) {
+				controllerIdx = 1 - controllerIdx;
+			}
+
+			/* See if the device is available on the controller being tested */
+
+			if ((devAttr->
+			     flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx))
+			    != 0) {
+				for (channelIdx = 0;
+				     channelIdx < DMA_NUM_CHANNELS;
+				     channelIdx++) {
+					channel =
+					    &gDMA.controller[controllerIdx].
+					    channel[channelIdx];
+
+					if (((channel->
+					      flags &
+					      DMA_CHANNEL_FLAG_IS_DEDICATED) ==
+					     0)
+					    &&
+					    ((channel->
+					      flags & DMA_CHANNEL_FLAG_IN_USE)
+					     == 0)) {
+						if (((channel->
+						      flags &
+						      DMA_CHANNEL_FLAG_LARGE_FIFO)
+						     != 0)
+						    &&
+						    ((devAttr->
+						      flags &
+						      DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO)
+						     == 0)) {
+							/* This channel is a large fifo - don't tie it up */
+							/* with devices that we don't want using it. */
+
+							continue;
+						}
+
+						channel->flags |=
+						    DMA_CHANNEL_FLAG_IN_USE;
+						channel->devType = dev;
+						devAttr->flags |=
+						    DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+						channel->fileName = fileName;
+						channel->lineNum = lineNum;
+#endif
+						handle =
+						    MAKE_HANDLE(controllerIdx,
+								channelIdx);
+
+						/* Now that we've reserved the channel - we can go ahead and configure it */
+
+						if (ConfigChannel(handle) != 0) {
+							handle = -EIO;
+							printk(KERN_ERR
+							       "dma_request_channel: ConfigChannel failed\n");
+						}
+						goto out;
+					}
+				}
+			}
+		}
+
+		/* No channels are currently available. Let's wait for one to free up. */
+
+		{
+			DEFINE_WAIT(wait);
+
+			prepare_to_wait(&gDMA.freeChannelQ, &wait,
+					TASK_INTERRUPTIBLE);
+			up(&gDMA.lock);
+			schedule();
+			finish_wait(&gDMA.freeChannelQ, &wait);
+
+			if (signal_pending(current)) {
+				/* We don't currently hold gDMA.lock, so we return directly */
+
+				return -ERESTARTSYS;
+			}
+		}
+
+		if (down_interruptible(&gDMA.lock)) {
+			return -ERESTARTSYS;
+		}
+	}
+
+out:
+	up(&gDMA.lock);
+
+	return handle;
+}
+
+/* Create both _dbg and non _dbg functions for modules. */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+#undef dma_request_channel
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+{
+	return dma_request_channel_dbg(dev, __FILE__, __LINE__);
+}
+
+EXPORT_SYMBOL(dma_request_channel_dbg);
+#endif
+EXPORT_SYMBOL(dma_request_channel);
+
+/****************************************************************************/
+/**
+*   Frees a previously allocated DMA Handle.
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t handle	/* DMA handle. */
+    ) {
+	int rc = 0;
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) {
+		channel->lastDevType = channel->devType;
+		channel->devType = DMA_DEVICE_NONE;
+	}
+	channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE;
+	devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE;
+
+out:
+	up(&gDMA.lock);
+
+	wake_up_interruptible(&gDMA.freeChannelQ);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_free_channel);
+
+/****************************************************************************/
+/**
+*   Determines if a given device has been configured as using a shared
+*   channel.
+*
+*   @return
+*       0           Device uses a dedicated channel
+*       > zero      Device uses a shared channel
+*       < zero      Error code
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t device	/* Device to check. */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0);
+}
+
+EXPORT_SYMBOL(dma_device_is_channel_shared);
+
+/****************************************************************************/
+/**
+*   Allocates buffers for the descriptors. This is normally done automatically
+*   but needs to be done explicitly when initiating a dma from interrupt
+*   context.
+*
+*   @return
+*       0       Descriptors were allocated successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+			  dma_addr_t srcData,	/* Place to get data to write to device */
+			  dma_addr_t dstData,	/* Pointer to device data address */
+			  size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int numDescriptors;
+	size_t ringBytesRequired;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if (devAttr->config.transferType != transferType) {
+		return -EINVAL;
+	}
+
+	/* Figure out how many descriptors we need. */
+
+	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+	/*        srcData, dstData, numBytes); */
+
+	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+							      (void *)srcData,
+							      (void *)dstData,
+							      numBytes);
+	if (numDescriptors < 0) {
+		printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+	/* a new one. */
+
+	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+		/* Make sure that this code path is never taken from interrupt context. */
+		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+		/* allocation needs to have already been done. */
+
+		might_sleep();
+
+		/* Free the old descriptor ring and allocate a new one. */
+
+		dma_free_descriptor_ring(&devAttr->ring);
+
+		/* And allocate a new one. */
+
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
+			       __func__, numDescriptors);
+			return rc;
+		}
+		/* Setup the descriptor for this transfer */
+
+		if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+					  devAttr->ring.physAddr,
+					  devAttr->ring.bytesAllocated,
+					  numDescriptors) < 0) {
+			printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n",
+			       __func__);
+			return -EINVAL;
+		}
+	} else {
+		/* We've already got enough ring buffer allocated. All we need to do is reset */
+		/* any control information, just in case the previous DMA was stopped. */
+
+		dmacHw_resetDescriptorControl(devAttr->ring.virtAddr);
+	}
+
+	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+	/* as last time, then we don't need to call setDataDescriptor again. */
+
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* Remember the critical information for this transfer so that we can eliminate */
+	/* another call to dma_alloc_descriptors if the caller reuses the same buffers */
+
+	devAttr->prevSrcData = srcData;
+	devAttr->prevDstData = dstData;
+	devAttr->prevNumBytes = numBytes;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptors);
+
+/****************************************************************************/
+/**
+*   Allocates and sets up descriptors for a double buffered circular buffer.
+*
+*   This is primarily intended to be used for things like the ingress samples
+*   from a microphone.
+*
+*   @return
+*       > 0     Number of descriptors actually allocated.
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+				     dma_addr_t srcData,	/* Physical address of source data */
+				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
+				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
+				     size_t numBytes	/* Number of bytes in each destination buffer */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int numDst1Descriptors;
+	int numDst2Descriptors;
+	int numDescriptors;
+	size_t ringBytesRequired;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	/* Figure out how many descriptors we need. */
+
+	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+	/*        srcData, dstData, numBytes); */
+
+	numDst1Descriptors =
+	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+					     (void *)dstData1, numBytes);
+	if (numDst1Descriptors < 0) {
+		return -EINVAL;
+	}
+	numDst2Descriptors =
+	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+					     (void *)dstData2, numBytes);
+	if (numDst2Descriptors < 0) {
+		return -EINVAL;
+	}
+	numDescriptors = numDst1Descriptors + numDst2Descriptors;
+	/* printk("numDescriptors: %d\n", numDescriptors); */
+
+	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+	/* a new one. */
+
+	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+		/* Make sure that this code path is never taken from interrupt context. */
+		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+		/* allocation needs to have already been done. */
+
+		might_sleep();
+
+		/* Free the old descriptor ring and allocate a new one. */
+
+		dma_free_descriptor_ring(&devAttr->ring);
+
+		/* And allocate a new one. */
+
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
+			       __func__, ringBytesRequired);
+			return rc;
+		}
+	}
+
+	/* Setup the descriptor for this transfer. Since this function is used with */
+	/* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */
+	/* setDataDescriptor will keep trying to append onto the end. */
+
+	if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+				  devAttr->ring.physAddr,
+				  devAttr->ring.bytesAllocated,
+				  numDescriptors) < 0) {
+		printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__);
+		return -EINVAL;
+	}
+
+	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+	/* as last time, then we don't need to call setDataDescriptor again. */
+
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData1, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData2, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */
+	/* try to make the 'prev' variables right. */
+
+	devAttr->prevSrcData = 0;
+	devAttr->prevDstData = 0;
+	devAttr->prevNumBytes = 0;
+
+	return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_alloc_double_dst_descriptors);
+
+/****************************************************************************/
+/**
+*   Initiates a transfer when the descriptors have already been setup.
+*
+*   This is a special case, and normally, the dma_transfer_xxx functions should
+*   be used.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+				devAttr->ring.virtAddr);
+
+	/* Since we got this far, everything went successfully */
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_start_transfer);
+
+/****************************************************************************/
+/**
+*   Stops a previously started DMA transfer.
+*
+*   @return
+*       0       Transfer was stopped successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	dmacHw_stopTransfer(channel->dmacHwHandle);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_stop_transfer);
+
+/****************************************************************************/
+/**
+*   Waits for a DMA to complete by polling. This function is only intended
+*   to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	dmacHw_TRANSFER_STATUS_e status;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	while ((status =
+		dmacHw_transferCompleted(channel->dmacHwHandle)) ==
+	       dmacHw_TRANSFER_STATUS_BUSY) {
+		;
+	}
+
+	if (status == dmacHw_TRANSFER_STATUS_ERROR) {
+		printk(KERN_ERR "%s: DMA transfer failed\n", __func__);
+		return -EIO;
+	}
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_wait_transfer_done);
+
+/****************************************************************************/
+/**
+*   Initiates a DMA, allocating the descriptors as required.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
+		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+		 dma_addr_t srcData,	/* Place to get data to write to device */
+		 dma_addr_t dstData,	/* Pointer to device data address */
+		 size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if (devAttr->config.transferType != transferType) {
+		return -EINVAL;
+	}
+
+	/* We keep track of the information about the previous request for this */
+	/* device, and if the attributes match, then we can use the descriptors we setup */
+	/* the last time, and not have to reinitialize everything. */
+
+	{
+		rc =
+		     dma_alloc_descriptors(handle, transferType, srcData,
+					   dstData, numBytes);
+		if (rc != 0) {
+			return rc;
+		}
+	}
+
+	/* And kick off the transfer */
+
+	devAttr->numBytes = numBytes;
+	devAttr->transferStartTime = timer_get_tick_count();
+
+	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+				devAttr->ring.virtAddr);
+
+	/* Since we got this far, everything went successfully */
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_transfer);
+
+/****************************************************************************/
+/**
+*   Set the callback function which will be called when a transfer completes.
+*   If a NULL callback function is set, then no callback will occur.
+*
+*   @note   @a devHandler will be called from IRQ context.
+*
+*   @return
+*       0       - Success
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
+			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
+			   void *userData	/* Pointer which will be passed to devHandler. */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+	unsigned long flags;
+
+	if (!IsDeviceValid(dev)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+	local_irq_save(flags);
+
+	devAttr->userData = userData;
+	devAttr->devHandler = devHandler;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_handler);
+
+/****************************************************************************/
+/**
+*   Initializes a memory mapping structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap)
+{
+	memset(memMap, 0, sizeof(*memMap));
+
+	init_MUTEX(&memMap->lock);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_init_mem_map);
+
+/****************************************************************************/
+/**
+*   Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap)
+{
+	down(&memMap->lock);	/* Just being paranoid */
+
+	/* Free up any allocated memory */
+
+	up(&memMap->lock);
+	memset(memMap, 0, sizeof(*memMap));
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_term_mem_map);
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and categorizes it.
+*
+*   @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr)
+{
+	unsigned long addrVal = (unsigned long)addr;
+
+	if (addrVal >= VMALLOC_END) {
+		/* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
+
+		/* dma_alloc_xxx pages are physically and virtually contiguous */
+
+		return DMA_MEM_TYPE_DMA;
+	}
+
+	/* Technically, we could add one more classification. Addresses between VMALLOC_END */
+	/* and the beginning of the DMA virtual address could be considered to be I/O space. */
+	/* Right now, nobody cares about this particular classification, so we ignore it. */
+
+	if (is_vmalloc_addr(addr)) {
+		/* Address comes from the vmalloc'd region. Pages are virtually */
+		/* contiguous but NOT physically contiguous */
+
+		return DMA_MEM_TYPE_VMALLOC;
+	}
+
+	if (addrVal >= PAGE_OFFSET) {
+		/* PAGE_OFFSET is typically 0xC0000000 */
+
+		/* kmalloc'd pages are physically contiguous */
+
+		return DMA_MEM_TYPE_KMALLOC;
+	}
+
+	return DMA_MEM_TYPE_USER;
+}
+
+EXPORT_SYMBOL(dma_mem_type);
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and determines if we support DMA'ing to/from
+*   that type of memory.
+*
+*   @return boolean -
+*               return value != 0 means dma supported
+*               return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr)
+{
+	DMA_MemType_t memType = dma_mem_type(addr);
+
+	return (memType == DMA_MEM_TYPE_DMA)
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+	    || (memType == DMA_MEM_TYPE_KMALLOC)
+#endif
+	    || (memType == DMA_MEM_TYPE_USER);
+}
+
+EXPORT_SYMBOL(dma_mem_supports_dma);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		  enum dma_data_direction dir	/* Direction that the mapping will be going */
+    ) {
+	int rc;
+
+	down(&memMap->lock);
+
+	DMA_MAP_PRINT("memMap: %p\n", memMap);
+
+	if (memMap->inUse) {
+		printk(KERN_ERR "%s: memory map %p is already being used\n",
+		       __func__, memMap);
+		rc = -EBUSY;
+		goto out;
+	}
+
+	memMap->inUse = 1;
+	memMap->dir = dir;
+	memMap->numRegionsUsed = 0;
+
+	rc = 0;
+
+out:
+
+	DMA_MAP_PRINT("returning %d", rc);
+
+	up(&memMap->lock);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_start);
+
+/****************************************************************************/
+/**
+*   Adds a segment of memory to a memory map. Each segment is both
+*   physically and virtually contiguous.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+static int dma_map_add_segment(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+			       DMA_Region_t *region,	/* Region that the segment belongs to */
+			       void *virtAddr,	/* Virtual address of the segment being added */
+			       dma_addr_t physAddr,	/* Physical address of the segment being added */
+			       size_t numBytes	/* Number of bytes of the segment being added */
+    ) {
+	DMA_Segment_t *segment;
+
+	DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
+		      physAddr, numBytes);
+
+	/* Sanity check */
+
+	if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
+	    || (((unsigned long)virtAddr + numBytes)) >
+	    ((unsigned long)region->virtAddr + region->numBytes)) {
+		printk(KERN_ERR
+		       "%s: virtAddr %p is outside region @ %p len: %d\n",
+		       __func__, virtAddr, region->virtAddr, region->numBytes);
+		return -EINVAL;
+	}
+
+	if (region->numSegmentsUsed > 0) {
+		/* Check to see if this segment is physically contiguous with the previous one */
+
+		segment = &region->segment[region->numSegmentsUsed - 1];
+
+		if ((segment->physAddr + segment->numBytes) == physAddr) {
+			/* It is - just add on to the end */
+
+			DMA_MAP_PRINT("appending %d bytes to last segment\n",
+				      numBytes);
+
+			segment->numBytes += numBytes;
+
+			return 0;
+		}
+	}
+
+	/* Reallocate to hold more segments, if required. */
+
+	if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
+		DMA_Segment_t *newSegment;
+		size_t oldSize =
+		    region->numSegmentsAllocated * sizeof(*newSegment);
+		int newAlloc = region->numSegmentsAllocated + 4;
+		size_t newSize = newAlloc * sizeof(*newSegment);
+
+		newSegment = kmalloc(newSize, GFP_KERNEL);
+		if (newSegment == NULL) {
+			return -ENOMEM;
+		}
+		memcpy(newSegment, region->segment, oldSize);
+		memset(&((uint8_t *) newSegment)[oldSize], 0,
+		       newSize - oldSize);
+		kfree(region->segment);
+
+		region->numSegmentsAllocated = newAlloc;
+		region->segment = newSegment;
+	}
+
+	segment = &region->segment[region->numSegmentsUsed];
+	region->numSegmentsUsed++;
+
+	segment->virtAddr = virtAddr;
+	segment->physAddr = physAddr;
+	segment->numBytes = numBytes;
+
+	DMA_MAP_PRINT("returning success\n");
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to a memory map. Each region is virtually
+*   contiguous, but not necessarily physically contiguous.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		       void *mem,	/* Virtual address that we want to get a map of */
+		       size_t numBytes	/* Number of bytes being mapped */
+    ) {
+	unsigned long addr = (unsigned long)mem;
+	unsigned int offset;
+	int rc = 0;
+	DMA_Region_t *region;
+	dma_addr_t physAddr;
+
+	down(&memMap->lock);
+
+	DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
+
+	if (!memMap->inUse) {
+		printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
+		       __func__);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Reallocate to hold more regions. */
+
+	if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
+		DMA_Region_t *newRegion;
+		size_t oldSize =
+		    memMap->numRegionsAllocated * sizeof(*newRegion);
+		int newAlloc = memMap->numRegionsAllocated + 4;
+		size_t newSize = newAlloc * sizeof(*newRegion);
+
+		newRegion = kmalloc(newSize, GFP_KERNEL);
+		if (newRegion == NULL) {
+			rc = -ENOMEM;
+			goto out;
+		}
+		memcpy(newRegion, memMap->region, oldSize);
+		memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
+
+		kfree(memMap->region);
+
+		memMap->numRegionsAllocated = newAlloc;
+		memMap->region = newRegion;
+	}
+
+	region = &memMap->region[memMap->numRegionsUsed];
+	memMap->numRegionsUsed++;
+
+	offset = addr & ~PAGE_MASK;
+
+	region->memType = dma_mem_type(mem);
+	region->virtAddr = mem;
+	region->numBytes = numBytes;
+	region->numSegmentsUsed = 0;
+	region->numLockedPages = 0;
+	region->lockedPages = NULL;
+
+	switch (region->memType) {
+	case DMA_MEM_TYPE_VMALLOC:
+		{
+			atomic_inc(&gDmaStatMemTypeVmalloc);
+
+			/* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
+
+			/* vmalloc'd pages are not physically contiguous */
+
+			rc = -EINVAL;
+			break;
+		}
+
+	case DMA_MEM_TYPE_KMALLOC:
+		{
+			atomic_inc(&gDmaStatMemTypeKmalloc);
+
+			/* kmalloc'd pages are physically contiguous, so they'll have exactly */
+			/* one segment */
+
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+			physAddr =
+			    dma_map_single(NULL, mem, numBytes, memMap->dir);
+			rc = dma_map_add_segment(memMap, region, mem, physAddr,
+						 numBytes);
+#else
+			rc = -EINVAL;
+#endif
+			break;
+		}
+
+	case DMA_MEM_TYPE_DMA:
+		{
+			/* dma_alloc_xxx pages are physically contiguous */
+
+			atomic_inc(&gDmaStatMemTypeCoherent);
+
+			physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
+
+			dma_sync_single_for_cpu(NULL, physAddr, numBytes,
+						memMap->dir);
+			rc = dma_map_add_segment(memMap, region, mem, physAddr,
+						 numBytes);
+			break;
+		}
+
+	case DMA_MEM_TYPE_USER:
+		{
+			size_t firstPageOffset;
+			size_t firstPageSize;
+			struct page **pages;
+			struct task_struct *userTask;
+
+			atomic_inc(&gDmaStatMemTypeUser);
+
+#if 1
+			/* If the pages are user pages, then the dma_mem_map_set_user_task function */
+			/* must have been previously called. */
+
+			if (memMap->userTask == NULL) {
+				printk(KERN_ERR
+				       "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
+				       __func__);
+				return -EINVAL;
+			}
+
+			/* User pages need to be locked. */
+
+			firstPageOffset =
+			    (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
+			firstPageSize = PAGE_SIZE - firstPageOffset;
+
+			region->numLockedPages = (firstPageOffset
+						  + region->numBytes +
+						  PAGE_SIZE - 1) / PAGE_SIZE;
+			pages =
+			    kmalloc(region->numLockedPages *
+				    sizeof(struct page *), GFP_KERNEL);
+
+			if (pages == NULL) {
+				region->numLockedPages = 0;
+				return -ENOMEM;
+			}
+
+			userTask = memMap->userTask;
+
+			down_read(&userTask->mm->mmap_sem);
+			rc = get_user_pages(userTask,	/* task */
+					    userTask->mm,	/* mm */
+					    (unsigned long)region->virtAddr,	/* start */
+					    region->numLockedPages,	/* len */
+					    memMap->dir == DMA_FROM_DEVICE,	/* write */
+					    0,	/* force */
+					    pages,	/* pages (array of pointers to page) */
+					    NULL);	/* vmas */
+			up_read(&userTask->mm->mmap_sem);
+
+			if (rc != region->numLockedPages) {
+				kfree(pages);
+				region->numLockedPages = 0;
+
+				if (rc >= 0) {
+					rc = -EINVAL;
+				}
+			} else {
+				uint8_t *virtAddr = region->virtAddr;
+				size_t bytesRemaining;
+				int pageIdx;
+
+				rc = 0;	/* Since get_user_pages returns +ve number */
+
+				region->lockedPages = pages;
+
+				/* We've locked the user pages. Now we need to walk them and figure */
+				/* out the physical addresses. */
+
+				/* The first page may be partial */
+
+				dma_map_add_segment(memMap,
+						    region,
+						    virtAddr,
+						    PFN_PHYS(page_to_pfn
+							     (pages[0])) +
+						    firstPageOffset,
+						    firstPageSize);
+
+				virtAddr += firstPageSize;
+				bytesRemaining =
+				    region->numBytes - firstPageSize;
+
+				for (pageIdx = 1;
+				     pageIdx < region->numLockedPages;
+				     pageIdx++) {
+					size_t bytesThisPage =
+					    (bytesRemaining >
+					     PAGE_SIZE ? PAGE_SIZE :
+					     bytesRemaining);
+
+					DMA_MAP_PRINT
+					    ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
+					     pageIdx, pages[pageIdx],
+					     page_to_pfn(pages[pageIdx]),
+					     PFN_PHYS(page_to_pfn
+						      (pages[pageIdx])));
+
+					dma_map_add_segment(memMap,
+							    region,
+							    virtAddr,
+							    PFN_PHYS(page_to_pfn
+								     (pages
+								      [pageIdx])),
+							    bytesThisPage);
+
+					virtAddr += bytesThisPage;
+					bytesRemaining -= bytesThisPage;
+				}
+			}
+#else
+			printk(KERN_ERR
+			       "%s: User mode pages are not yet supported\n",
+			       __func__);
+
+			/* user pages are not physically contiguous */
+
+			rc = -EINVAL;
+#endif
+			break;
+		}
+
+	default:
+		{
+			printk(KERN_ERR "%s: Unsupported memory type: %d\n",
+			       __func__, region->memType);
+
+			rc = -EINVAL;
+			break;
+		}
+	}
+
+	if (rc != 0) {
+		memMap->numRegionsUsed--;
+	}
+
+out:
+
+	DMA_MAP_PRINT("returning %d\n", rc);
+
+	up(&memMap->lock);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_add_segment);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		void *mem,	/* Virtual address that we want to get a map of */
+		size_t numBytes,	/* Number of bytes being mapped */
+		enum dma_data_direction dir	/* Direction that the mapping will be going */
+    ) {
+	int rc;
+
+	rc = dma_map_start(memMap, dir);
+	if (rc == 0) {
+		rc = dma_map_add_region(memMap, mem, numBytes);
+		if (rc < 0) {
+			/* Since the add fails, this function will fail, and the caller won't */
+			/* call unmap, so we need to do it here. */
+
+			dma_unmap(memMap, 0);
+		}
+	}
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_mem);
+
+/****************************************************************************/
+/**
+*   Setup a descriptor ring for a given memory map.
+*
+*   It is assumed that the descriptor ring has already been initialized, and
+*   this routine will only reallocate a new descriptor ring if the existing
+*   one is too small.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev,	/* DMA device (where the ring is stored) */
+				   DMA_MemMap_t *memMap,	/* Memory map that will be used */
+				   dma_addr_t devPhysAddr	/* Physical address of device */
+    ) {
+	int rc;
+	int numDescriptors;
+	DMA_DeviceAttribute_t *devAttr;
+	DMA_Region_t *region;
+	DMA_Segment_t *segment;
+	dma_addr_t srcPhysAddr;
+	dma_addr_t dstPhysAddr;
+	int regionIdx;
+	int segmentIdx;
+
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+	down(&memMap->lock);
+
+	/* Figure out how many descriptors we need */
+
+	numDescriptors = 0;
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			if (memMap->dir == DMA_TO_DEVICE) {
+				srcPhysAddr = segment->physAddr;
+				dstPhysAddr = devPhysAddr;
+			} else {
+				srcPhysAddr = devPhysAddr;
+				dstPhysAddr = segment->physAddr;
+			}
+
+			rc =
+			     dma_calculate_descriptor_count(dev, srcPhysAddr,
+							    dstPhysAddr,
+							    segment->
+							    numBytes);
+			if (rc < 0) {
+				printk(KERN_ERR
+				       "%s: dma_calculate_descriptor_count failed: %d\n",
+				       __func__, rc);
+				goto out;
+			}
+			numDescriptors += rc;
+		}
+	}
+
+	/* Adjust the size of the ring, if it isn't big enough */
+
+	if (numDescriptors > devAttr->ring.descriptorsAllocated) {
+		dma_free_descriptor_ring(&devAttr->ring);
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring failed: %d\n",
+			       __func__, rc);
+			goto out;
+		}
+	} else {
+		rc =
+		     dma_init_descriptor_ring(&devAttr->ring,
+					      numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_init_descriptor_ring failed: %d\n",
+			       __func__, rc);
+			goto out;
+		}
+	}
+
+	/* Populate the descriptors */
+
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			if (memMap->dir == DMA_TO_DEVICE) {
+				srcPhysAddr = segment->physAddr;
+				dstPhysAddr = devPhysAddr;
+			} else {
+				srcPhysAddr = devPhysAddr;
+				dstPhysAddr = segment->physAddr;
+			}
+
+			rc =
+			     dma_add_descriptors(&devAttr->ring, dev,
+						 srcPhysAddr, dstPhysAddr,
+						 segment->numBytes);
+			if (rc < 0) {
+				printk(KERN_ERR
+				       "%s: dma_add_descriptors failed: %d\n",
+				       __func__, rc);
+				goto out;
+			}
+		}
+	}
+
+	rc = 0;
+
+out:
+
+	up(&memMap->lock);
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_create_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+	      int dirtied	/* non-zero if any of the pages were modified */
+    ) {
+	int regionIdx;
+	int segmentIdx;
+	DMA_Region_t *region;
+	DMA_Segment_t *segment;
+
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			switch (region->memType) {
+			case DMA_MEM_TYPE_VMALLOC:
+				{
+					printk(KERN_ERR
+					       "%s: vmalloc'd pages are not yet supported\n",
+					       __func__);
+					return -EINVAL;
+				}
+
+			case DMA_MEM_TYPE_KMALLOC:
+				{
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+					dma_unmap_single(NULL,
+							 segment->physAddr,
+							 segment->numBytes,
+							 memMap->dir);
+#endif
+					break;
+				}
+
+			case DMA_MEM_TYPE_DMA:
+				{
+					dma_sync_single_for_cpu(NULL,
+								segment->
+								physAddr,
+								segment->
+								numBytes,
+								memMap->dir);
+					break;
+				}
+
+			case DMA_MEM_TYPE_USER:
+				{
+					/* Nothing to do here. */
+
+					break;
+				}
+
+			default:
+				{
+					printk(KERN_ERR
+					       "%s: Unsupported memory type: %d\n",
+					       __func__, region->memType);
+					return -EINVAL;
+				}
+			}
+
+			segment->virtAddr = NULL;
+			segment->physAddr = 0;
+			segment->numBytes = 0;
+		}
+
+		if (region->numLockedPages > 0) {
+			int pageIdx;
+
+			/* Some user pages were locked. We need to go and unlock them now. */
+
+			for (pageIdx = 0; pageIdx < region->numLockedPages;
+			     pageIdx++) {
+				struct page *page =
+				    region->lockedPages[pageIdx];
+
+				if (memMap->dir == DMA_FROM_DEVICE) {
+					SetPageDirty(page);
+				}
+				page_cache_release(page);
+			}
+			kfree(region->lockedPages);
+			region->numLockedPages = 0;
+			region->lockedPages = NULL;
+		}
+
+		region->memType = DMA_MEM_TYPE_NONE;
+		region->virtAddr = NULL;
+		region->numBytes = 0;
+		region->numSegmentsUsed = 0;
+	}
+	memMap->userTask = NULL;
+	memMap->numRegionsUsed = 0;
+	memMap->inUse = 0;
+
+	up(&memMap->lock);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_unmap);
-- 
GitLab


From 34559125742645843bc7639900c7b4737ec12b72 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:01:47 +0100
Subject: [PATCH 212/257] ARM: 5649/1: bcmring: add bcmring timer function

bcmring timer helper function, hardware register headers

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/mach/timer.h | 77 ++++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/timex.h | 25 +++++++
 arch/arm/mach-bcmring/timer.c              | 62 +++++++++++++++++
 3 files changed, 164 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/timer.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/timex.h
 create mode 100644 arch/arm/mach-bcmring/timer.c

diff --git a/arch/arm/mach-bcmring/include/mach/timer.h b/arch/arm/mach-bcmring/include/mach/timer.h
new file mode 100644
index 00000000000..5a94bbb032b
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timer.h
@@ -0,0 +1,77 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+*
+*****************************************************************************
+*
+*  timer.h
+*
+*  PURPOSE:
+*
+*
+*
+*  NOTES:
+*
+*****************************************************************************/
+
+#if !defined(BCM_LINUX_TIMER_H)
+#define BCM_LINUX_TIMER_H
+
+#if defined(__KERNEL__)
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Constants and Types ---------------------------------------------- */
+
+typedef unsigned int timer_tick_count_t;
+typedef unsigned int timer_tick_rate_t;
+typedef unsigned int timer_msec_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+/* ---- Function Prototypes ---------------------------------------------- */
+
+/****************************************************************************
+*
+*  timer_get_tick_count
+*
+*
+***************************************************************************/
+timer_tick_count_t timer_get_tick_count(void);
+
+/****************************************************************************
+*
+*  timer_get_tick_rate
+*
+*
+***************************************************************************/
+timer_tick_rate_t timer_get_tick_rate(void);
+
+/****************************************************************************
+*
+*  timer_get_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_get_msec(void);
+
+/****************************************************************************
+*
+*  timer_ticks_to_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks);
+
+#endif /* __KERNEL__ */
+#endif /* BCM_LINUX_TIMER_H */
diff --git a/arch/arm/mach-bcmring/include/mach/timex.h b/arch/arm/mach-bcmring/include/mach/timex.h
new file mode 100644
index 00000000000..40d033ec589
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ *
+ *  Integrator architecture timex specifications
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Specifies the number of ticks per second
+ */
+#define CLOCK_TICK_RATE		100000 /* REG_SMT_TICKS_PER_SEC */
diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c
new file mode 100644
index 00000000000..2d415d2a8e6
--- /dev/null
+++ b/arch/arm/mach-bcmring/timer.c
@@ -0,0 +1,62 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <csp/tmrHw.h>
+
+#include <mach/timer.h>
+/* The core.c file initializes timers 1 and 3 as a linux clocksource. */
+/* The real time clock should probably be the real linux clocksource. */
+/* In the meantime, this file should agree with core.c as to the */
+/* profiling timer. If the clocksource is moved to rtc later, then */
+/* we can init the profiling timer here instead. */
+
+/* Timer 1 provides 25MHz resolution syncrhonized to scheduling and APM timing */
+/* Timer 3 provides bus freqeuncy sychronized to ACLK, but spread spectrum will */
+/* affect synchronization with scheduling and APM timing. */
+
+#define PROF_TIMER 1
+
+timer_tick_rate_t timer_get_tick_rate(void)
+{
+	return tmrHw_getCountRate(PROF_TIMER);
+}
+
+timer_tick_count_t timer_get_tick_count(void)
+{
+	return tmrHw_GetCurrentCount(PROF_TIMER);	/* change downcounter to upcounter */
+}
+
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks)
+{
+	static int tickRateMsec;
+
+	if (tickRateMsec == 0) {
+		tickRateMsec = timer_get_tick_rate() / 1000;
+	}
+
+	return ticks / tickRateMsec;
+}
+
+timer_msec_t timer_get_msec(void)
+{
+	return timer_ticks_to_msec(timer_get_tick_count());
+}
+
+EXPORT_SYMBOL(timer_get_tick_count);
+EXPORT_SYMBOL(timer_ticks_to_msec);
+EXPORT_SYMBOL(timer_get_tick_rate);
+EXPORT_SYMBOL(timer_get_msec);
-- 
GitLab


From 16f5875034fa9e36a72c4223c8ef42cfe461d766 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:02:21 +0100
Subject: [PATCH 213/257] ARM: 5650/1: bcmring: add io.h, uncompress. h, and
 entry-macro.S

add remaining header files in include/mach directory
add entry-macro.S file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../mach-bcmring/include/mach/entry-macro.S   | 86 +++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/io.h       | 56 ++++++++++++
 .../mach-bcmring/include/mach/uncompress.h    | 43 ++++++++++
 3 files changed, 185 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-bcmring/include/mach/io.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/uncompress.h

diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S
new file mode 100644
index 00000000000..7d393ca010a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S
@@ -0,0 +1,86 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+ *
+ * Low-level IRQ helper macros for BCMRing-based platforms
+ *
+ */
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =(MM_IO_BASE_INTC0)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #IRQ_INTC0_START
+		cmp	\irqstat, #0
+		bne	1001f
+
+		ldr	\base, =(MM_IO_BASE_INTC1)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #IRQ_INTC1_START
+		cmp	\irqstat, #0
+		bne	1001f
+
+		ldr	\base, =(MM_IO_BASE_SINTC)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #0xffffffff             @ code meaning no interrupt bits set
+		cmp	\irqstat, #0
+		beq	1002f
+
+		mov	\irqnr, #IRQ_SINTC_START        @ something is set, so fixup return value
+
+1001:
+		movs	\tmp, \irqstat, lsl #16
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #16
+
+		movs	\tmp, \irqstat, lsl #8
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #8
+
+		movs	\tmp, \irqstat, lsl #4
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #4
+
+		movs	\tmp, \irqstat, lsl #2
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #2
+
+		movs	\tmp, \irqstat, lsl #1
+		addeq	\irqnr, \irqnr, #1
+		orrs	\base, \base, #1
+
+1002:           @ irqnr will be set to 0xffffffff if no irq bits are set
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	irq_prio_table
+		.endm
+
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
new file mode 100644
index 00000000000..4db0eff9035
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -0,0 +1,56 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)         ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
+
+/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
+/* happen in readw/writew etc. */
+
+#define readb(c)        __raw_readb(c)
+#define readw(c)        __raw_readw(c)
+#define readl(c)        __raw_readl(c)
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define readsb(p, d, l)   __raw_readsb(p, d, l)
+#define readsw(p, d, l)   __raw_readsw(p, d, l)
+#define readsl(p, d, l)   __raw_readsl(p, d, l)
+
+#define writeb(v, c)     __raw_writeb(v, c)
+#define writew(v, c)     __raw_writew(v, c)
+#define writel(v, c)     __raw_writel(v, c)
+
+#define writesb(p, d, l)  __raw_writesb(p, d, l)
+#define writesw(p, d, l)  __raw_writesw(p, d, l)
+#define writesl(p, d, l)  __raw_writesl(p, d, l)
+
+#define memset_io(c, v, l)    _memset_io((c), (v), (l))
+#define memcpy_fromio(a, c, l)    _memcpy_fromio((a), (c), (l))
+#define memcpy_toio(c, a, l)  _memcpy_toio((c), (a), (l))
+
+#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/uncompress.h b/arch/arm/mach-bcmring/include/mach/uncompress.h
new file mode 100644
index 00000000000..9c9821b7797
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/uncompress.h
@@ -0,0 +1,43 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/mm_addr.h>
+
+#define BCMRING_UART_0_DR (*(volatile unsigned int *)MM_ADDR_IO_UARTA)
+#define BCMRING_UART_0_FR (*(volatile unsigned int *)(MM_ADDR_IO_UARTA + 0x18))
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	/* Send out UARTA */
+	while (BCMRING_UART_0_FR & (1 << 5))
+		;
+
+	BCMRING_UART_0_DR = c;
+}
+
+
+static inline void flush(void)
+{
+	/* Wait for the tx fifo to be empty */
+	while ((BCMRING_UART_0_FR & (1 << 7)) == 0)
+		;
+
+	/* Wait for the final character to be sent on the txd line */
+	while (BCMRING_UART_0_FR & (1 << 3))
+		;
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
-- 
GitLab


From 7bab8bfc7f1060e3ab4bc0a90813a9338e6994b9 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:02:59 +0100
Subject: [PATCH 214/257] ARM: 5651/1: bcmring: csp capability header files

add mach-bcmring csp capability header files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/mach/csp/cap.h  |  63 +++
 .../include/mach/csp/cap_inline.h             | 409 ++++++++++++++++++
 .../mach-bcmring/include/mach/csp/hw_cfg.h    |  73 ++++
 3 files changed, 545 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/cap.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h

diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap.h b/arch/arm/mach-bcmring/include/mach/csp/cap.h
new file mode 100644
index 00000000000..30fa2d54063
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap.h
@@ -0,0 +1,63 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_H
+#define CAP_H
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Public Constants and Types --------------------------------------- */
+typedef enum {
+	CAP_NOT_PRESENT = 0,
+	CAP_PRESENT
+} CAP_RC_T;
+
+typedef enum {
+	CAP_VPM,
+	CAP_ETH_PHY,
+	CAP_ETH_GMII,
+	CAP_ETH_SGMII,
+	CAP_USB,
+	CAP_TSC,
+	CAP_EHSS,
+	CAP_SDIO,
+	CAP_UARTB,
+	CAP_KEYPAD,
+	CAP_CLCD,
+	CAP_GE,
+	CAP_LEDM,
+	CAP_BBL,
+	CAP_VDEC,
+	CAP_PIF,
+	CAP_APM,
+	CAP_SPU,
+	CAP_PKA,
+	CAP_RNG,
+} CAP_CAPABILITY_T;
+
+typedef enum {
+	CAP_LCD_WVGA = 0,
+	CAP_LCD_VGA = 0x1,
+	CAP_LCD_WQVGA = 0x2,
+	CAP_LCD_QVGA = 0x3
+} CAP_LCD_RES_T;
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index);
+static inline uint32_t cap_getMaxArmSpeedHz(void);
+static inline uint32_t cap_getMaxVpmSpeedHz(void);
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void);
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
new file mode 100644
index 00000000000..933ce68ed90
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
@@ -0,0 +1,409 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_INLINE_H
+#define CAP_INLINE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/cap.h>
+#include <cfg_global.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+#define CAP_CONFIG0_VPM_DIS          0x00000001
+#define CAP_CONFIG0_ETH_PHY0_DIS     0x00000002
+#define CAP_CONFIG0_ETH_PHY1_DIS     0x00000004
+#define CAP_CONFIG0_ETH_GMII0_DIS    0x00000008
+#define CAP_CONFIG0_ETH_GMII1_DIS    0x00000010
+#define CAP_CONFIG0_ETH_SGMII0_DIS   0x00000020
+#define CAP_CONFIG0_ETH_SGMII1_DIS   0x00000040
+#define CAP_CONFIG0_USB0_DIS         0x00000080
+#define CAP_CONFIG0_USB1_DIS         0x00000100
+#define CAP_CONFIG0_TSC_DIS          0x00000200
+#define CAP_CONFIG0_EHSS0_DIS        0x00000400
+#define CAP_CONFIG0_EHSS1_DIS        0x00000800
+#define CAP_CONFIG0_SDIO0_DIS        0x00001000
+#define CAP_CONFIG0_SDIO1_DIS        0x00002000
+#define CAP_CONFIG0_UARTB_DIS        0x00004000
+#define CAP_CONFIG0_KEYPAD_DIS       0x00008000
+#define CAP_CONFIG0_CLCD_DIS         0x00010000
+#define CAP_CONFIG0_GE_DIS           0x00020000
+#define CAP_CONFIG0_LEDM_DIS         0x00040000
+#define CAP_CONFIG0_BBL_DIS          0x00080000
+#define CAP_CONFIG0_VDEC_DIS         0x00100000
+#define CAP_CONFIG0_PIF_DIS          0x00200000
+#define CAP_CONFIG0_RESERVED1_DIS    0x00400000
+#define CAP_CONFIG0_RESERVED2_DIS    0x00800000
+
+#define CAP_CONFIG1_APMA_DIS         0x00000001
+#define CAP_CONFIG1_APMB_DIS         0x00000002
+#define CAP_CONFIG1_APMC_DIS         0x00000004
+#define CAP_CONFIG1_CLCD_RES_MASK    0x00000600
+#define CAP_CONFIG1_CLCD_RES_SHIFT   9
+#define CAP_CONFIG1_CLCD_RES_WVGA    (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_VGA     (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_WQVGA   (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_QVGA    (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+
+#define CAP_CONFIG2_SPU_DIS          0x00000010
+#define CAP_CONFIG2_PKA_DIS          0x00000020
+#define CAP_CONFIG2_RNG_DIS          0x00000080
+
+#if   (CFG_GLOBAL_CHIP == BCM11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == FPGA11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == BCM11109)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11170)
+#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11110)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 2
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_ARM_CLK_HZ 500000000
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_ARM_CLK_HZ 300000000
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define CAP_HW_CFG_ARM_CLK_HZ 666666666
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_VPM_CLK_HZ 333333333
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_VPM_CLK_HZ 200000000
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************
+*  cap_isPresent -
+*
+*  PURPOSE:
+*     Determines if the chip has a certain capability present
+*
+*  PARAMETERS:
+*     capability - type of capability to determine if present
+*
+*  RETURNS:
+*     CAP_PRESENT or CAP_NOT_PRESENT
+****************************************************************************/
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index)
+{
+	CAP_RC_T returnVal = CAP_NOT_PRESENT;
+
+	switch (capability) {
+	case CAP_VPM:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_PHY:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_GMII:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_SGMII:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_USB:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_TSC:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_EHSS:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_SDIO:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_UARTB:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_KEYPAD:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_CLCD:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_GE:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_LEDM:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_BBL:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_VDEC:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_PIF:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_APM:
+		{
+			if ((index == 0)
+			    && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 2)
+			    && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_SPU:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_PKA:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_RNG:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	default:
+		{
+		}
+		break;
+	}
+	return returnVal;
+}
+
+/****************************************************************************
+*  cap_getMaxArmSpeedHz -
+*
+*  PURPOSE:
+*     Determines the maximum speed of the ARM CPU
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*     clock speed in Hz that the ARM processor is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxArmSpeedHz(void)
+{
+#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+	return 500000000;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+	return 300000000;
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+	return 666666666;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+*  cap_getMaxVpmSpeedHz -
+*
+*  PURPOSE:
+*     Determines the maximum speed of the VPM
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*     clock speed in Hz that the VPM is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxVpmSpeedHz(void)
+{
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+	return 333333333;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+	return 200000000;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+*  cap_getMaxLcdRes -
+*
+*  PURPOSE:
+*     Determines the maximum LCD resolution capabilities
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*   CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA
+*
+****************************************************************************/
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void)
+{
+	return (CAP_LCD_RES_T)
+		((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >>
+		 CAP_CONFIG1_CLCD_RES_SHIFT);
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
new file mode 100644
index 00000000000..cfa91bed9d3
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
@@ -0,0 +1,73 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_HW_CFG_H
+#define CSP_HW_CFG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <cfg_global.h>
+#include <mach/csp/cap_inline.h>
+
+#if defined(__KERNEL__)
+#include <mach/memory_settings.h>
+#else
+#include <hw_cfg.h>
+#endif
+
+/* Some items that can be defined externally, but will be set to default values */
+/* if they are not defined. */
+/*      HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE   Default undefined and SS is enabled. */
+/*      HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
+/*      HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
+/*      HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
+/*      HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
+/*      HW_CFG_SDRAM_ADDR_BRC                Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */
+/*      HW_CFG_SDRAM_CLK_ASYNC               Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */
+
+#if defined(CFG_GLOBAL_CHIP)
+  #if (CFG_GLOBAL_CHIP == FPGA11107)
+     #define HW_CFG_BUS_CLK_HZ            5000000
+     #define HW_CFG_DDR_CTLR_CLK_HZ      10000000
+     #define HW_CFG_DDR_PHY_OMIT
+     #define HW_CFG_UART_CLK_HZ           7500000
+  #else
+     #define HW_CFG_PLL_VCO_HZ           2000000000
+     #define HW_CFG_PLL2_VCO_HZ          1800000000
+     #define HW_CFG_ARM_CLK_HZ            CAP_HW_CFG_ARM_CLK_HZ
+     #define HW_CFG_BUS_CLK_HZ            166666666
+     #define HW_CFG_DDR_CTLR_CLK_HZ       333333333
+     #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+     #define HW_CFG_UART_CLK_HZ           142857142
+     #define HW_CFG_VPM_CLK_HZ            CAP_HW_CFG_VPM_CLK_HZ
+  #endif
+#else
+   #define HW_CFG_PLL_VCO_HZ           1800000000
+   #define HW_CFG_PLL2_VCO_HZ          1800000000
+   #define HW_CFG_ARM_CLK_HZ            450000000
+   #define HW_CFG_BUS_CLK_HZ            150000000
+   #define HW_CFG_DDR_CTLR_CLK_HZ       300000000
+   #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+   #define HW_CFG_UART_CLK_HZ           150000000
+   #define HW_CFG_VPM_CLK_HZ            300000000
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_HW_CFG_H */
+
-- 
GitLab


From 9133760f4b0c0628d45532aad17f59896cd7b57f Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:03:40 +0100
Subject: [PATCH 215/257] ARM: 5652/1: bcmring: add misc headers for csp code

add misc wrapper headers for csp code
add ddrc register header file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/cache.h     |  35 +
 arch/arm/mach-bcmring/include/csp/delay.h     |  36 +
 arch/arm/mach-bcmring/include/csp/errno.h     |  32 +
 arch/arm/mach-bcmring/include/csp/module.h    |  32 +
 arch/arm/mach-bcmring/include/csp/reg.h       | 114 +++
 arch/arm/mach-bcmring/include/csp/stdint.h    |  30 +
 arch/arm/mach-bcmring/include/csp/string.h    |  34 +
 .../mach-bcmring/include/mach/csp/ddrcReg.h   | 872 ++++++++++++++++++
 8 files changed, 1185 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/cache.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/delay.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/errno.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/module.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/reg.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/stdint.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/string.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h

diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h
new file mode 100644
index 00000000000..caa20e59db9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/cache.h
@@ -0,0 +1,35 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_CACHE_H
+#define CSP_CACHE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <asm/cacheflush.h>
+
+#define CSP_CACHE_FLUSH_ALL      flush_cache_all()
+
+#else
+
+#define CSP_CACHE_FLUSH_ALL
+
+#endif
+
+#endif /* CSP_CACHE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h
new file mode 100644
index 00000000000..8b3d8036729
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/delay.h
@@ -0,0 +1,36 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_DELAY_H
+#define CSP_DELAY_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+/* Some CSP routines require use of the following delay routines. Use the OS */
+/* version if available, otherwise use a CSP specific definition. */
+/* void udelay(unsigned long usecs); */
+/* void mdelay(unsigned long msecs); */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+   #include <linux/delay.h>
+#else
+   #include <mach/csp/delay.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /*  CSP_DELAY_H */
diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h
new file mode 100644
index 00000000000..51357dd5b66
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/errno.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_ERRNO_H
+#define CSP_ERRNO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if   defined(__KERNEL__)
+#include <linux/errno.h>
+#elif defined(CSP_SIMULATION)
+#include <asm-generic/errno.h>
+#else
+#include <errno.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_ERRNO_H */
diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h
new file mode 100644
index 00000000000..c30d2a5975a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/module.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_MODULE_H
+#define CSP_MODULE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+    #include <linux/module.h>
+#else
+    #define EXPORT_SYMBOL(symbol)
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_MODULE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
new file mode 100644
index 00000000000..e5f60bf5a1f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/reg.h
@@ -0,0 +1,114 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    reg.h
+*
+*  @brief   Generic register defintions used in CSP
+*/
+/****************************************************************************/
+
+#ifndef CSP_REG_H
+#define CSP_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define __REG32(x)      (*((volatile uint32_t *)(x)))
+#define __REG16(x)      (*((volatile uint16_t *)(x)))
+#define __REG8(x)       (*((volatile uint8_t *) (x)))
+
+/* Macros used to define a sequence of reserved registers. The start / end */
+/* are byte offsets in the particular register definition, with the "end" */
+/* being the offset of the next un-reserved register. E.g. if offsets */
+/* 0x10 through to 0x1f are reserved, then this reserved area could be */
+/* specified as follows. */
+/*  typedef struct */
+/*  { */
+/*      uint32_t reg1;           offset 0x00 */
+/*      uint32_t reg2;           offset 0x04 */
+/*      uint32_t reg3;           offset 0x08 */
+/*      uint32_t reg4;           offset 0x0c */
+/*      REG32_RSVD(0x10, 0x20); */
+/*      uint32_t reg5;           offset 0x20 */
+/*      ... */
+/*  } EXAMPLE_REG_t; */
+#define REG8_RSVD(start, end)   uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)]
+#define REG16_RSVD(start, end)  uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)]
+#define REG32_RSVD(start, end)  uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)]
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */
+/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the  */
+/* flags variable to be declared locally. */
+/* e.g. */
+/*    statement1; */
+/*    { */
+/*       REG_LOCAL_IRQ_SAVE; */
+/*       <multiple statements here> */
+/*       REG_LOCAL_IRQ_RESTORE; */
+/*    } */
+/*    statement2; */
+/*  */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <mach/hardware.h>
+#include <linux/interrupt.h>
+
+#define REG_LOCAL_IRQ_SAVE      HW_DECLARE_SPINLOCK(reg32) \
+	unsigned long flags; HW_IRQ_SAVE(reg32, flags)
+
+#define REG_LOCAL_IRQ_RESTORE   HW_IRQ_RESTORE(reg32, flags)
+
+#else
+
+#define REG_LOCAL_IRQ_SAVE
+#define REG_LOCAL_IRQ_RESTORE
+
+#endif
+
+static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg &= value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg |= value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask,
+				     uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg = (*reg & mask) | value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_write(volatile uint32_t *reg, uint32_t value)
+{
+	*reg = value;
+}
+
+#endif /* CSP_REG_H */
diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h
new file mode 100644
index 00000000000..3a8718bbf70
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/stdint.h
@@ -0,0 +1,30 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_STDINT_H
+#define CSP_STDINT_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_STDINT_H */
diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h
new file mode 100644
index 00000000000..ad9e4005f14
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/string.h
@@ -0,0 +1,34 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+
+#ifndef CSP_STRING_H
+#define CSP_STRING_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+   #include <linux/string.h>
+#else
+   #include <string.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_STRING_H */
+
diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
new file mode 100644
index 00000000000..f1b68e26fa6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
@@ -0,0 +1,872 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    ddrcReg.h
+*
+*  @brief   Register definitions for BCMRING DDR2 Controller and PHY
+*
+*/
+/****************************************************************************/
+
+#ifndef DDRC_REG_H
+#define DDRC_REG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/reg.h>
+#include <csp/stdint.h>
+
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*********************************************************************/
+/* DDR2 Controller (ARM PL341) register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 DDR2 configuration registers, offset 0x000 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+	typedef struct {
+		uint32_t memcStatus;
+		uint32_t memcCmd;
+		uint32_t directCmd;
+		uint32_t memoryCfg;
+		uint32_t refreshPrd;
+		uint32_t casLatency;
+		uint32_t writeLatency;
+		uint32_t tMrd;
+		uint32_t tRas;
+		uint32_t tRc;
+		uint32_t tRcd;
+		uint32_t tRfc;
+		uint32_t tRp;
+		uint32_t tRrd;
+		uint32_t tWr;
+		uint32_t tWtr;
+		uint32_t tXp;
+		uint32_t tXsr;
+		uint32_t tEsr;
+		uint32_t memoryCfg2;
+		uint32_t memoryCfg3;
+		uint32_t tFaw;
+	} ddrcReg_CTLR_MEMC_REG_t;
+
+#define ddrcReg_CTLR_MEMC_REG_OFFSET                    0x0000
+#define ddrcReg_CTLR_MEMC_REGP                          ((volatile ddrcReg_CTLR_MEMC_REG_t *)  (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK             (0x3 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4                (0x0 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8                (0x3 << 12)
+
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK          (0x3 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0             (0x0 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1             (0x1 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2             (0x2 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4             (0x3 << 10)
+
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK             (0x3 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1                (0x0 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2                (0x1 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3                (0x2 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4                (0x3 << 7)
+
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK              (0x7 << 4)
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2              (0x5 << 4)
+
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK             (0x3 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16               (0x0 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32               (0x1 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64               (0x2 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128              (0x3 << 2)
+
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK             (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG           (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY            (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED           (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR           (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_CMD_MASK                      (0x7 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_GO                        (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_SLEEP                     (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_WAKEUP                    (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_PAUSE                     (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE                 (0x4 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE              (0x7 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT              20
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL       (0x0 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH        (0x1 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG            (0x2 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP                (0x3 << 18)
+
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT              16
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT              0
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK               (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK           (0x3 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1              (0x0 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2              (0x1 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3              (0x2 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4              (0x3 << 21)
+
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK           (0x7 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0            (0x0 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1            (0x1 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2            (0x2 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3            (0x3 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4            (0x4 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5            (0x5 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6            (0x6 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7           (0x7 << 18)
+
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK          (0x7 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4             (0x2 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8             (0x3 << 15)	/* @note Not supported in PL341 */
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE          (0x1 << 13)
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT    7
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK     (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK       (0x7 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11         (0x0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12         (0x1 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13         (0x2 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14         (0x3 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15         (0x4 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16         (0x5 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK       (0x7 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9          (0x1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10         (0x2 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11         (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_REFRESH_PRD_SHIFT                  0
+#define ddrcReg_CTLR_REFRESH_PRD_MASK                   (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CAS_LATENCY_SHIFT                  1
+#define ddrcReg_CTLR_CAS_LATENCY_MASK                   (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT                0
+#define ddrcReg_CTLR_WRITE_LATENCY_MASK                 (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_MRD_SHIFT                        0
+#define ddrcReg_CTLR_T_MRD_MASK                         (0x7f << ddrcReg_CTLR_T_MRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RAS_SHIFT                        0
+#define ddrcReg_CTLR_T_RAS_MASK                         (0x1f << ddrcReg_CTLR_T_RAS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RC_SHIFT                         0
+#define ddrcReg_CTLR_T_RC_MASK                          (0x1f << ddrcReg_CTLR_T_RC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK          (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RCD_SHIFT                        0
+#define ddrcReg_CTLR_T_RCD_MASK                         (0x7 << ddrcReg_CTLR_T_RCD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK          (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RFC_SHIFT                        0
+#define ddrcReg_CTLR_T_RFC_MASK                         (0x7f << ddrcReg_CTLR_T_RFC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT          8
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK           (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RP_SHIFT                         0
+#define ddrcReg_CTLR_T_RP_MASK                          (0xf << ddrcReg_CTLR_T_RP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RRD_SHIFT                        0
+#define ddrcReg_CTLR_T_RRD_MASK                         (0xf << ddrcReg_CTLR_T_RRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WR_SHIFT                         0
+#define ddrcReg_CTLR_T_WR_MASK                          (0x7 << ddrcReg_CTLR_T_WR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WTR_SHIFT                        0
+#define ddrcReg_CTLR_T_WTR_MASK                         (0x7 << ddrcReg_CTLR_T_WTR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XP_SHIFT                         0
+#define ddrcReg_CTLR_T_XP_MASK                          (0xff << ddrcReg_CTLR_T_XP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XSR_SHIFT                        0
+#define ddrcReg_CTLR_T_XSR_MASK                         (0xff << ddrcReg_CTLR_T_XSR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_ESR_SHIFT                        0
+#define ddrcReg_CTLR_T_ESR_MASK                         (0xff << ddrcReg_CTLR_T_ESR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK             (0x3 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS           (0 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS           (1 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS           (2 << 6)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK     (0x3 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2        (0 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3        (3 << 4)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW     (0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH    (1 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW     (0 << 2)
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH    (1 << 2)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK               (0x3 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC              (0 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M        (1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M        (3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT       0
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK        (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK          (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT                 0
+#define ddrcReg_CTLR_T_FAW_PERIOD_MASK                  (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CNT                            16
+#define ddrcReg_CTLR_QOS_MAX                            (ddrcReg_CTLR_QOS_CNT - 1)
+
+	typedef struct {
+		uint32_t cfg[ddrcReg_CTLR_QOS_CNT];
+	} ddrcReg_CTLR_QOS_REG_t;
+
+#define ddrcReg_CTLR_QOS_REG_OFFSET                     0x100
+#define ddrcReg_CTLR_QOS_REGP                           ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT                  2
+#define ddrcReg_CTLR_QOS_CFG_MAX_MASK                   (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT                  1
+#define ddrcReg_CTLR_QOS_CFG_MIN_MASK                   (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_ENABLE                     (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 Memory chip configuration registers, offset 0x200 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CNT                           4
+#define ddrcReg_CTLR_CHIP_MAX                           (ddrcReg_CTLR_CHIP_CNT - 1)
+
+	typedef struct {
+		uint32_t cfg[ddrcReg_CTLR_CHIP_CNT];
+	} ddrcReg_CTLR_CHIP_REG_t;
+
+#define ddrcReg_CTLR_CHIP_REG_OFFSET                    0x200
+#define ddrcReg_CTLR_CHIP_REGP                          ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK              (1 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL      (0 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL      (1 << 16)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT      8
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK       (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT       0
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK        (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 User configuration registers, offset 0x300 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CNT                    2
+
+	typedef struct {
+		uint32_t input;
+		uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT];
+		uint32_t feature;
+	} ddrcReg_CTLR_USER_REG_t;
+
+#define ddrcReg_CTLR_USER_REG_OFFSET                    0x300
+#define ddrcReg_CTLR_USER_REGP                          ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT            0
+#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK             (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT              0
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK               (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT)
+
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT      1
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK       (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134      (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301      (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE        (1 << 2)
+#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE    (1 << 0)
+
+/*********************************************************************/
+/* Broadcom DDR23 PHY register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Address and Control register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+	typedef struct {
+		uint32_t revision;
+		uint32_t pmCtl;
+		 REG32_RSVD(0x0008, 0x0010);
+		uint32_t pllStatus;
+		uint32_t pllCfg;
+		uint32_t pllPreDiv;
+		uint32_t pllDiv;
+		uint32_t pllCtl1;
+		uint32_t pllCtl2;
+		uint32_t ssCtl;
+		uint32_t ssCfg;
+		uint32_t vdlStatic;
+		uint32_t vdlDynamic;
+		uint32_t padIdle;
+		uint32_t pvtComp;
+		uint32_t padDrive;
+		uint32_t clkRgltrCtl;
+	} ddrcReg_PHY_ADDR_CTL_REG_t;
+
+#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET                 0x0400
+#define ddrcReg_PHY_ADDR_CTL_REGP                       ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
+
+/* @todo These SS definitions are duplicates of ones below */
+
+#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE                 0x00000001
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK     0xFFFF0000
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT    16
+#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK      10	/* Higher the value, lower the SS modulation frequency */
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK     0x0000FFFF
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT    0
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT       8
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED          (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET     (1 << 31)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT     17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE        (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG            (1 << 7)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN         (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE      (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE      (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET            (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET            (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN             (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB     (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN         (1 << 25)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT     20
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT      8
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK       (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT       4
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT           24
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK            (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT         0
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK          (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT       30
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK        (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT     27
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT     24
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT      22
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER          (0x1 << 21)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT          19
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT          17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT          15
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT          13
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT          10
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK           (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT        5
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK         (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT     0
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT    4
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT    2
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE     (0x1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE     (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE           (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT  16
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK   (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT      0
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK       (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE           (1 << 20)
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE          (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT      12
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT      8
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT      0
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK       (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE         (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT     8
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT     0
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK      (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE            (1u << 31)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE     (1 << 8)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE  (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE   (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE   (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE  (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE   (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE   (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE           (1 << 30)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE           (1 << 29)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE       (1 << 28)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE    (1 << 27)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE     (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE   (1 << 25)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE     (1 << 24)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT          20
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT          16
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT     8
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT       4
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B            (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18       (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI      (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV         (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW             (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF     (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF      (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Byte Lane register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CNT                       2
+#define ddrcReg_PHY_BYTE_LANE_MAX                       (ddrcReg_CTLR_BYTE_LANE_CNT - 1)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT               8
+
+	typedef struct {
+		uint32_t revision;
+		uint32_t vdlCalibrate;
+		uint32_t vdlStatus;
+		 REG32_RSVD(0x000c, 0x0010);
+		uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT];
+		uint32_t readCtl;
+		uint32_t readStatus;
+		uint32_t readClear;
+		uint32_t padIdleCtl;
+		uint32_t padDriveCtl;
+		uint32_t padClkCtl;
+		uint32_t writeCtl;
+		uint32_t clkRegCtl;
+	} ddrcReg_PHY_BYTE_LANE_REG_t;
+
+/* There are 2 instances of the byte Lane registers, one for each byte lane. */
+#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET              0x0500
+#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET              0x0600
+
+#define ddrcReg_PHY_BYTE_LANE_1_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET))
+#define ddrcReg_PHY_BYTE_LANE_2_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT      8
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT      0
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE      (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE      (0 << 4)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST            (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS          (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE            (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST            (1 << 0)
+
+/* ----------------------------------------------------- */
+
+/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */
+/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */
+/* register. The fine rise and fall are no longer used, so add some definitions for just */
+/* the step setting to simplify things. */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT     8
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK      (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT    4
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK     (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK           (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE           (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE            (1 << 16)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT        12
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT        8
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT        0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK         (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P     0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N     1
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN        2
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM   3
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P    4
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N    5
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN       6
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM  7
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT      8
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK       (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE    (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST    (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE    (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST    (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT   0
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK    (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS         (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE                   (1u << 31)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE         (1 << 19)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE          (1 << 18)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE           (1 << 17)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE           (1 << 16)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE         (1 << 15)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE          (1 << 14)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE           (1 << 13)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE           (1 << 12)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE   (1 << 11)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE    (1 << 10)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE     (1 << 9)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE     (1 << 8)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE        (1 << 7)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE         (1 << 6)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE          (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE          (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE        (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE         (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE          (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE          (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB      (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B                   (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18              (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI             (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV                (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW                    (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE                   (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3               (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF                  (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF                   (1 << 0)
+
+/*********************************************************************/
+/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */
+/*********************************************************************/
+
+	typedef struct {
+		uint32_t cfg;
+		uint32_t actMonCnt;
+		uint32_t ctl;
+		uint32_t lbistCtl;
+		uint32_t lbistSeed;
+		uint32_t lbistStatus;
+		uint32_t tieOff;
+		uint32_t actMonClear;
+		uint32_t status;
+		uint32_t user;
+	} ddrcReg_CTLR_PHY_GLUE_REG_t;
+
+#define ddrcReg_CTLR_PHY_GLUE_OFFSET                            0x0700
+#define ddrcReg_CTLR_PHY_GLUE_REGP                              ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET))
+
+/* ----------------------------------------------------- */
+
+/* DDR2 / AXI block phase alignment interrupt control */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT                     18
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK                      (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF                       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT                  (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM                 (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE                  (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT              17
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT            16
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW          (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED   ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT             15
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK              (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED        ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301
+
+/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */
+/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */
+/* controller. If 2 chips selects are being used, then software control must be enabled. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD    (1 << 14)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE  (1 << 13)
+
+/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10)
+
+/* Chip select count */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT                  9
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK                   (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1                      (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT                     8
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC                     (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT                7
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT                6
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT             0
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK              (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT                0
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK                 (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT)
+
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#ifdef __cplusplus
+}				/* end extern "C" */
+#endif
+#endif				/* DDRC_REG_H */
-- 
GitLab


From f1947c7a6717e437d9fe0e27a76bacf77f570d2d Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:04:54 +0100
Subject: [PATCH 216/257] ARM: 5654/1: bcmring: add csp chipc hardware register
 file

add csp chipc hardware register file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../include/mach/csp/chipcHw_reg.h            | 530 ++++++++++++++++++
 1 file changed, 530 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h

diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
new file mode 100644
index 00000000000..b162448f613
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
@@ -0,0 +1,530 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw_reg.h
+*
+*  @brief   Definitions for low level chip control registers
+*
+*/
+/****************************************************************************/
+#ifndef CHIPCHW_REG_H
+#define CHIPCHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <csp/reg.h>
+#include <mach/csp/ddrcReg.h>
+
+#define chipcHw_BASE_ADDRESS    MM_IO_BASE_CHIPC
+
+typedef struct {
+	uint32_t ChipId;	/* Chip ID */
+	uint32_t DDRClock;	/* PLL1 Channel 1 for DDR clock */
+	uint32_t ARMClock;	/* PLL1 Channel 2 for ARM clock */
+	uint32_t ESWClock;	/* PLL1 Channel 3 for ESW system clock */
+	uint32_t VPMClock;	/* PLL1 Channel 4 for VPM clock */
+	uint32_t ESW125Clock;	/* PLL1 Channel 5 for ESW 125MHz clock */
+	uint32_t UARTClock;	/* PLL1 Channel 6 for UART clock */
+	uint32_t SDIO0Clock;	/* PLL1 Channel 7 for SDIO 0 clock */
+	uint32_t SDIO1Clock;	/* PLL1 Channel 8 for SDIO 1 clock */
+	uint32_t SPIClock;	/* PLL1 Channel 9 for SPI master Clock  */
+	uint32_t ETMClock;	/* PLL1 Channel 10 for ARM ETM Clock  */
+
+	uint32_t ACLKClock;	/* ACLK Clock (Divider) */
+	uint32_t OTPClock;	/* OTP Clock  (Divider) */
+	uint32_t I2CClock;	/* I2C Clock (CK_13m) (Divider) */
+	uint32_t I2S0Clock;	/* I2S0 Clock (Divider) */
+	uint32_t RTBUSClock;	/* RTBUS (DDR PHY Config.) Clock (Divider) */
+	uint32_t pad1;
+	uint32_t APM100Clock;	/* APM 100MHz CLK Clock (Divider) */
+	uint32_t TSCClock;	/* TSC Clock (Divider) */
+	uint32_t LEDClock;	/* LED Clock (Divider) */
+
+	uint32_t USBClock;	/* PLL2 Channel 1 for USB clock */
+	uint32_t LCDClock;	/* PLL2 Channel 2 for LCD clock */
+	uint32_t APMClock;	/* PLL2 Channel 3 for APM 200 MHz clock */
+
+	uint32_t BusIntfClock;	/* Bus interface clock */
+
+	uint32_t PLLStatus;	/* PLL status register (PLL1) */
+	uint32_t PLLConfig;	/* PLL configuration register  (PLL1) */
+	uint32_t PLLPreDivider;	/* PLL pre-divider control register (PLL1) */
+	uint32_t PLLDivider;	/* PLL divider control register (PLL1) */
+	uint32_t PLLControl1;	/* PLL analog control register #1 (PLL1) */
+	uint32_t PLLControl2;	/* PLL analog control register #2 (PLL1) */
+
+	uint32_t I2S1Clock;	/* I2S1 Clock  */
+	uint32_t AudioEnable;	/* Enable/ disable audio channel */
+	uint32_t SoftReset1;	/* Reset blocks */
+	uint32_t SoftReset2;	/* Reset blocks */
+	uint32_t Spare1;	/* Phase align interrupts */
+	uint32_t Sticky;	/* Sticky bits */
+	uint32_t MiscCtrl;	/* Misc. control */
+	uint32_t pad3[3];
+
+	uint32_t PLLStatus2;	/* PLL status register (PLL2) */
+	uint32_t PLLConfig2;	/* PLL configuration register  (PLL2) */
+	uint32_t PLLPreDivider2;	/* PLL pre-divider control register (PLL2) */
+	uint32_t PLLDivider2;	/* PLL divider control register (PLL2) */
+	uint32_t PLLControl12;	/* PLL analog control register #1 (PLL2) */
+	uint32_t PLLControl22;	/* PLL analog control register #2 (PLL2) */
+
+	uint32_t DDRPhaseCtrl1;	/* DDR Clock Phase Alignment control1 */
+	uint32_t VPMPhaseCtrl1;	/* VPM Clock Phase Alignment control1 */
+	uint32_t PhaseAlignStatus;	/* DDR/VPM Clock Phase Alignment Status */
+	uint32_t PhaseCtrlStatus;	/* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */
+	uint32_t DDRPhaseCtrl2;	/* DDR Clock Phase Alignment control2 */
+	uint32_t VPMPhaseCtrl2;	/* VPM Clock Phase Alignment control2 */
+	uint32_t pad4[9];
+
+	uint32_t SoftOTP1;	/* Software OTP control */
+	uint32_t SoftOTP2;	/* Software OTP control */
+	uint32_t SoftStraps;	/* Software strap */
+	uint32_t PinStraps;	/* Pin Straps */
+	uint32_t DiffOscCtrl;	/* Diff oscillator control */
+	uint32_t DiagsCtrl;	/* Diagnostic control */
+	uint32_t DiagsOutputCtrl;	/* Diagnostic output enable */
+	uint32_t DiagsReadBackCtrl;	/* Diagnostic read back control */
+
+	uint32_t LcdPifMode;	/* LCD/PIF Pin Sharing MUX Mode */
+
+	uint32_t GpioMux_0_7;	/* Pin Sharing MUX0 Control */
+	uint32_t GpioMux_8_15;	/* Pin Sharing MUX1 Control */
+	uint32_t GpioMux_16_23;	/* Pin Sharing MUX2 Control */
+	uint32_t GpioMux_24_31;	/* Pin Sharing MUX3 Control */
+	uint32_t GpioMux_32_39;	/* Pin Sharing MUX4 Control */
+	uint32_t GpioMux_40_47;	/* Pin Sharing MUX5 Control */
+	uint32_t GpioMux_48_55;	/* Pin Sharing MUX6 Control */
+	uint32_t GpioMux_56_63;	/* Pin Sharing MUX7 Control */
+
+	uint32_t GpioSR_0_7;	/* Slew rate for GPIO 0 - 7 */
+	uint32_t GpioSR_8_15;	/* Slew rate for GPIO 8 - 15 */
+	uint32_t GpioSR_16_23;	/* Slew rate for GPIO 16 - 23 */
+	uint32_t GpioSR_24_31;	/* Slew rate for GPIO 24 - 31 */
+	uint32_t GpioSR_32_39;	/* Slew rate for GPIO 32 - 39 */
+	uint32_t GpioSR_40_47;	/* Slew rate for GPIO 40 - 47 */
+	uint32_t GpioSR_48_55;	/* Slew rate for GPIO 48 - 55 */
+	uint32_t GpioSR_56_63;	/* Slew rate for GPIO 56 - 63 */
+	uint32_t MiscSR_0_7;	/* Slew rate for MISC 0 - 7 */
+	uint32_t MiscSR_8_15;	/* Slew rate for MISC 8 - 15 */
+
+	uint32_t GpioPull_0_15;	/* Pull up registers for GPIO 0 - 15 */
+	uint32_t GpioPull_16_31;	/* Pull up registers for GPIO 16 - 31 */
+	uint32_t GpioPull_32_47;	/* Pull up registers for GPIO 32 - 47 */
+	uint32_t GpioPull_48_63;	/* Pull up registers for GPIO 48 - 63 */
+	uint32_t MiscPull_0_15;	/* Pull up registers for MISC 0 - 15 */
+
+	uint32_t GpioInput_0_31;	/* Input type for GPIO 0 - 31 */
+	uint32_t GpioInput_32_63;	/* Input type for GPIO 32 - 63 */
+	uint32_t MiscInput_0_15;	/* Input type for MISC 0 - 16 */
+} chipcHw_REG_t;
+
+#define pChipcHw  ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
+#define pChipcPhysical  ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
+
+#define chipcHw_REG_CHIPID_BASE_MASK                    0xFFFFF000
+#define chipcHw_REG_CHIPID_BASE_SHIFT                   12
+#define chipcHw_REG_CHIPID_REV_MASK                     0x00000FFF
+#define chipcHw_REG_REV_A0                              0xA00
+#define chipcHw_REG_REV_B0                              0x0B0
+
+#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE           0x80000000	/* Allow controlling PLL registers */
+#define chipcHw_REG_PLL_STATUS_LOCKED                   0x00000001	/* PLL is settled */
+#define chipcHw_REG_PLL_CONFIG_D_RESET                  0x00000008	/* Digital reset */
+#define chipcHw_REG_PLL_CONFIG_A_RESET                  0x00000004	/* Analog reset */
+#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE            0x00000020	/* Bypass enable */
+#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE            0x00000010	/* Output enable */
+#define chipcHw_REG_PLL_CONFIG_POWER_DOWN               0x00000001	/* Power down */
+#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ           1600000000	/* 1.6GHz VCO split frequency */
+#define chipcHw_REG_PLL_CONFIG_VCO_800_1600             0x00000000	/* VCO range 800-1600 MHz */
+#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200            0x00000080	/* VCO range 1601-3200 MHz */
+#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE              0x00010000	/* PLL test output enable */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK         0x003E0000	/* Mask to set test values */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT        17
+
+#define chipcHw_REG_PLL_CLOCK_PHASE_COMP                0x00800000	/* Phase comparator output */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK         0x00300000	/* Clock to bus ratio mask */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT        20	/* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_POWER_DOWN                0x00080000	/* PLL channel power down */
+#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO               0x00040000	/* Use GPIO as source */
+#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT             0x00020000	/* Select bypass clock */
+#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE             0x00010000	/* Clock gated ON */
+#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE       0x00008000	/* Clock phase update enable */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT       8	/* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK        0x00003F00	/* Phase control mask */
+#define chipcHw_REG_PLL_CLOCK_MDIV_MASK                 0x000000FF	/* Clock post divider mask
+
+									   00000000 = divide-by-256
+									   00000001 = divide-by-1
+									   00000010 = divide-by-2
+									   00000011 = divide-by-3
+									   00000100 = divide-by-4
+									   00000101 = divide-by-5
+									   00000110 = divide-by-6
+									   .
+									   .
+									   11111011 = divide-by-251
+									   11111100 = divide-by-252
+									   11111101 = divide-by-253
+									   11111110 = divide-by-254
+									 */
+
+#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER              0x00040000	/* NON-PLL clock source select */
+#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT             0x00020000	/* NON-PLL clock bypass enable */
+#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE             0x00010000	/* NON-PLL clock output enable */
+#define chipcHw_REG_DIV_CLOCK_DIV_MASK                  0x000000FF	/* NON-PLL clock post-divide mask */
+#define chipcHw_REG_DIV_CLOCK_DIV_256                   0x00000000	/* NON-PLL clock post-divide by 256 */
+
+#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT             0
+#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT             4
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT           8
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK            0x0001FF00
+#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN           0x02000000
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK       0x00700000	/* Divider mask */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER    0x00000000	/* Integer-N Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT  0x00100000	/* MASH Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT   0x00200000	/* MFB Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8   0x00300000	/* MASH Sigma-Delta Modulator 1/8 Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8    0x00400000	/* MFB Sigma-Delta Modulator 1/8 Mode */
+
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco)          ((vco) / chipcHw_XTAL_FREQ_Hz)
+#define chipcHw_REG_PLL_PREDIVIDER_P1                   1
+#define chipcHw_REG_PLL_PREDIVIDER_P2                   1
+
+#define chipcHw_REG_PLL_DIVIDER_M1DIV                   0x03000000
+#define chipcHw_REG_PLL_DIVIDER_FRAC                    0x00FFFFFF	/* Fractional divider */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS               (0x00FFFFFF)	/* To attain spread with max frequency */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f                  0	/* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f /
+								   chipcHw_REG_PLL_DIVIDER_FRAC
+								   = 0, when SS is disable
+								 */
+
+#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz)           ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz)))
+
+#define chipcHw_REG_ACLKClock_CLK_DIV_MASK              0x3
+
+/* System booting strap options */
+#define chipcHw_STRAPS_SOFT_OVERRIDE                    0x00000001	/* Software Strap Override */
+
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8         0x00000000	/* 8 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16         0x00000002	/* 16 bit NOR FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH         0x00000004	/* Serial FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16        0x00000006	/* 16 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_UART                 0x00000008	/* UART Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_MASK                 0x0000000E	/* Mask */
+
+/* System boot option */
+#define chipcHw_STRAPS_BOOT_OPTION_BROM                 0x00000000	/* Boot from Boot ROM */
+#define chipcHw_STRAPS_BOOT_OPTION_ARAM                 0x00000020	/* Boot from ARAM */
+#define chipcHw_STRAPS_BOOT_OPTION_NOR                  0x00000030	/* Boot from NOR flash */
+
+/* NAND Flash page size strap options */
+#define chipcHw_STRAPS_NAND_PAGESIZE_512                0x00000000	/* NAND FLASH page size of 512 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_2048               0x00000040	/* NAND FLASH page size of 2048 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_4096               0x00000080	/* NAND FLASH page size of 4096 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_EXT                0x000000C0	/* NAND FLASH page of extened size */
+#define chipcHw_STRAPS_NAND_PAGESIZE_MASK               0x000000C0	/* Mask */
+
+#define chipcHw_STRAPS_NAND_EXTRA_CYCLE                 0x00000400	/* NAND FLASH address cycle configuration */
+#define chipcHw_STRAPS_REBOOT_TO_UART                   0x00000800	/* Reboot to UART on error */
+
+/* Secure boot mode strap options */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL                 0x00000000	/* Normal Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_SW                 0x00000100	/* Software debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT               0x00000200	/* Boot rom debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET           0x00000300	/* Normal Boot (Quiet BootRom) */
+#define chipcHw_STRAPS_BOOT_MODE_MASK                   0x00000300	/* Mask */
+
+/* Slave Mode straps */
+#define chipcHw_STRAPS_I2CS                             0x02000000	/* I2C Slave  */
+#define chipcHw_STRAPS_SPIS                             0x01000000	/* SPI Slave  */
+
+/* Strap pin options */
+#define chipcHw_REG_SW_STRAPS                           ((pChipcHw->PinStraps & 0x0000FC00) >> 10)
+
+/* PIF/LCD pin sharing defines */
+#define chipcHw_REG_LCD_PIN_ENABLE                      0x00000001	/* LCD Controller is used and the pins have LCD functions */
+#define chipcHw_REG_PIF_PIN_ENABLE                      0x00000002	/* LCD pins are used to perform PIF functions  */
+
+#define chipcHw_GPIO_COUNT                              61	/* Number of GPIO pin accessible thorugh CHIPC */
+
+/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */
+#define chipcHw_REG_GPIO_MUX_KEYPAD                     0x00000001	/* GPIO mux for Keypad */
+#define chipcHw_REG_GPIO_MUX_I2CH                       0x00000002	/* GPIO mux for I2CH */
+#define chipcHw_REG_GPIO_MUX_SPI                        0x00000003	/* GPIO mux for SPI */
+#define chipcHw_REG_GPIO_MUX_UART                       0x00000004	/* GPIO mux for UART */
+#define chipcHw_REG_GPIO_MUX_LEDMTXP                    0x00000005	/* GPIO mux for LEDMTXP */
+#define chipcHw_REG_GPIO_MUX_LEDMTXS                    0x00000006	/* GPIO mux for LEDMTXS */
+#define chipcHw_REG_GPIO_MUX_SDIO0                      0x00000007	/* GPIO mux for SDIO0 */
+#define chipcHw_REG_GPIO_MUX_SDIO1                      0x00000008	/* GPIO mux for SDIO1 */
+#define chipcHw_REG_GPIO_MUX_PCM                        0x00000009	/* GPIO mux for PCM */
+#define chipcHw_REG_GPIO_MUX_I2S                        0x0000000A	/* GPIO mux for I2S */
+#define chipcHw_REG_GPIO_MUX_ETM                        0x0000000B	/* GPIO mux for ETM */
+#define chipcHw_REG_GPIO_MUX_DEBUG                      0x0000000C	/* GPIO mux for DEBUG */
+#define chipcHw_REG_GPIO_MUX_MISC                       0x0000000D	/* GPIO mux for MISC */
+#define chipcHw_REG_GPIO_MUX_GPIO                       0x00000000	/* GPIO mux for GPIO */
+#define chipcHw_REG_GPIO_MUX(pin)                       (&pChipcHw->GpioMux_0_7 + ((pin) >> 3))
+#define chipcHw_REG_GPIO_MUX_POSITION(pin)              (((pin) & 0x00000007) << 2)
+#define chipcHw_REG_GPIO_MUX_MASK                       0x0000000F	/* Mask */
+
+#define chipcHw_REG_SLEW_RATE_HIGH                      0x00000000	/* High speed slew rate */
+#define chipcHw_REG_SLEW_RATE_NORMAL                    0x00000008	/* Normal slew rate */
+							/* Pins beyond 42 are defined by skipping 8 bits within the register */
+#define chipcHw_REG_SLEW_RATE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_SLEW_RATE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+#define chipcHw_REG_SLEW_RATE_MASK                      0x00000008	/* Mask */
+
+#define chipcHw_REG_CURRENT_STRENGTH_2mA                0x00000001	/* Current driving strength 2 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_4mA                0x00000002	/* Current driving strength 4 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_6mA                0x00000004	/* Current driving strength 6 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_8mA                0x00000005	/* Current driving strength 8 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_10mA               0x00000006	/* Current driving strength 10 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_12mA               0x00000007	/* Current driving strength 12 milli ampere */
+#define chipcHw_REG_CURRENT_MASK                        0x00000007	/* Mask */
+							/* Pins beyond 42 are defined by skipping 8 bits */
+#define chipcHw_REG_CURRENT(pin)                        (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_CURRENT_POSITION(pin)               (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+
+#define chipcHw_REG_PULL_NONE                           0x00000000	/* No pull up register */
+#define chipcHw_REG_PULL_UP                             0x00000001	/* Pull up register enable */
+#define chipcHw_REG_PULL_DOWN                           0x00000002	/* Pull down register enable */
+#define chipcHw_REG_PULLUP_MASK                         0x00000003	/* Mask */
+							/* Pins beyond 42 are defined by skipping 4 bits */
+#define chipcHw_REG_PULLUP(pin)                         (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4)))
+#define chipcHw_REG_PULLUP_POSITION(pin)                (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1))
+
+#define chipcHw_REG_INPUTTYPE_CMOS                      0x00000000	/* Normal CMOS logic */
+#define chipcHw_REG_INPUTTYPE_ST                        0x00000001	/* High speed Schmitt Trigger */
+#define chipcHw_REG_INPUTTYPE_MASK                      0x00000001	/* Mask */
+							/* Pins beyond 42 are defined by skipping 2 bits */
+#define chipcHw_REG_INPUTTYPE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5)))
+#define chipcHw_REG_INPUTTYPE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F)))
+
+/* Device connected to the bus clock */
+#define chipcHw_REG_BUS_CLOCK_ARM                       0x00000001	/* Bus interface clock for ARM */
+#define chipcHw_REG_BUS_CLOCK_VDEC                      0x00000002	/* Bus interface clock for VDEC */
+#define chipcHw_REG_BUS_CLOCK_ARAM                      0x00000004	/* Bus interface clock for ARAM */
+#define chipcHw_REG_BUS_CLOCK_HPM                       0x00000008	/* Bus interface clock for HPM */
+#define chipcHw_REG_BUS_CLOCK_DDRC                      0x00000010	/* Bus interface clock for DDRC */
+#define chipcHw_REG_BUS_CLOCK_DMAC0                     0x00000020	/* Bus interface clock for DMAC0 */
+#define chipcHw_REG_BUS_CLOCK_DMAC1                     0x00000040	/* Bus interface clock for DMAC1 */
+#define chipcHw_REG_BUS_CLOCK_NVI                       0x00000080	/* Bus interface clock for NVI */
+#define chipcHw_REG_BUS_CLOCK_ESW                       0x00000100	/* Bus interface clock for ESW */
+#define chipcHw_REG_BUS_CLOCK_GE                        0x00000200	/* Bus interface clock for GE */
+#define chipcHw_REG_BUS_CLOCK_I2CH                      0x00000400	/* Bus interface clock for I2CH */
+#define chipcHw_REG_BUS_CLOCK_I2S0                      0x00000800	/* Bus interface clock for I2S0 */
+#define chipcHw_REG_BUS_CLOCK_I2S1                      0x00001000	/* Bus interface clock for I2S1 */
+#define chipcHw_REG_BUS_CLOCK_VRAM                      0x00002000	/* Bus interface clock for VRAM */
+#define chipcHw_REG_BUS_CLOCK_CLCD                      0x00004000	/* Bus interface clock for CLCD */
+#define chipcHw_REG_BUS_CLOCK_LDK                       0x00008000	/* Bus interface clock for LDK */
+#define chipcHw_REG_BUS_CLOCK_LED                       0x00010000	/* Bus interface clock for LED */
+#define chipcHw_REG_BUS_CLOCK_OTP                       0x00020000	/* Bus interface clock for OTP */
+#define chipcHw_REG_BUS_CLOCK_PIF                       0x00040000	/* Bus interface clock for PIF */
+#define chipcHw_REG_BUS_CLOCK_SPU                       0x00080000	/* Bus interface clock for SPU */
+#define chipcHw_REG_BUS_CLOCK_SDIO0                     0x00100000	/* Bus interface clock for SDIO0 */
+#define chipcHw_REG_BUS_CLOCK_SDIO1                     0x00200000	/* Bus interface clock for SDIO1 */
+#define chipcHw_REG_BUS_CLOCK_SPIH                      0x00400000	/* Bus interface clock for SPIH */
+#define chipcHw_REG_BUS_CLOCK_SPIS                      0x00800000	/* Bus interface clock for SPIS */
+#define chipcHw_REG_BUS_CLOCK_UART0                     0x01000000	/* Bus interface clock for UART0 */
+#define chipcHw_REG_BUS_CLOCK_UART1                     0x02000000	/* Bus interface clock for UART1 */
+#define chipcHw_REG_BUS_CLOCK_BBL                       0x04000000	/* Bus interface clock for BBL */
+#define chipcHw_REG_BUS_CLOCK_I2CS                      0x08000000	/* Bus interface clock for I2CS */
+#define chipcHw_REG_BUS_CLOCK_USBH                      0x10000000	/* Bus interface clock for USB Host */
+#define chipcHw_REG_BUS_CLOCK_USBD                      0x20000000	/* Bus interface clock for USB Device */
+#define chipcHw_REG_BUS_CLOCK_BROM                      0x40000000	/* Bus interface clock for Boot ROM */
+#define chipcHw_REG_BUS_CLOCK_TSC                       0x80000000	/* Bus interface clock for Touch screen */
+
+/* Software resets defines */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD          0x0000000080000000ULL	/* Reset Global VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_HOLD                 0x0000000040000000ULL	/* Reset VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL               0x0000000020000000ULL	/* Reset Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM                      0x0000000010000000ULL	/* Reset VPM */
+#define chipcHw_REG_SOFT_RESET_KEYPAD                   0x0000000008000000ULL	/* Reset Key pad */
+#define chipcHw_REG_SOFT_RESET_LED                      0x0000000004000000ULL	/* Reset LED */
+#define chipcHw_REG_SOFT_RESET_SPU                      0x0000000002000000ULL	/* Reset SPU */
+#define chipcHw_REG_SOFT_RESET_RNG                      0x0000000001000000ULL	/* Reset RNG */
+#define chipcHw_REG_SOFT_RESET_PKA                      0x0000000000800000ULL	/* Reset PKA */
+#define chipcHw_REG_SOFT_RESET_LCD                      0x0000000000400000ULL	/* Reset LCD */
+#define chipcHw_REG_SOFT_RESET_PIF                      0x0000000000200000ULL	/* Reset PIF */
+#define chipcHw_REG_SOFT_RESET_I2CS                     0x0000000000100000ULL	/* Reset I2C Slave */
+#define chipcHw_REG_SOFT_RESET_I2CH                     0x0000000000080000ULL	/* Reset I2C Host */
+#define chipcHw_REG_SOFT_RESET_SDIO1                    0x0000000000040000ULL	/* Reset SDIO 1 */
+#define chipcHw_REG_SOFT_RESET_SDIO0                    0x0000000000020000ULL	/* Reset SDIO 0 */
+#define chipcHw_REG_SOFT_RESET_BBL                      0x0000000000010000ULL	/* Reset BBL */
+#define chipcHw_REG_SOFT_RESET_I2S1                     0x0000000000008000ULL	/* Reset I2S1 */
+#define chipcHw_REG_SOFT_RESET_I2S0                     0x0000000000004000ULL	/* Reset I2S0 */
+#define chipcHw_REG_SOFT_RESET_SPIS                     0x0000000000002000ULL	/* Reset SPI Slave */
+#define chipcHw_REG_SOFT_RESET_SPIH                     0x0000000000001000ULL	/* Reset SPI Host */
+#define chipcHw_REG_SOFT_RESET_GPIO1                    0x0000000000000800ULL	/* Reset GPIO block 1 */
+#define chipcHw_REG_SOFT_RESET_GPIO0                    0x0000000000000400ULL	/* Reset GPIO block 0 */
+#define chipcHw_REG_SOFT_RESET_UART1                    0x0000000000000200ULL	/* Reset UART 1 */
+#define chipcHw_REG_SOFT_RESET_UART0                    0x0000000000000100ULL	/* Reset UART 0 */
+#define chipcHw_REG_SOFT_RESET_NVI                      0x0000000000000080ULL	/* Reset NVI */
+#define chipcHw_REG_SOFT_RESET_WDOG                     0x0000000000000040ULL	/* Reset Watch dog */
+#define chipcHw_REG_SOFT_RESET_TMR                      0x0000000000000020ULL	/* Reset Timer */
+#define chipcHw_REG_SOFT_RESET_ETM                      0x0000000000000010ULL	/* Reset ETM */
+#define chipcHw_REG_SOFT_RESET_ARM_HOLD                 0x0000000000000008ULL	/* Reset ARM and HOLD */
+#define chipcHw_REG_SOFT_RESET_ARM                      0x0000000000000004ULL	/* Reset ARM */
+#define chipcHw_REG_SOFT_RESET_CHIP_WARM                0x0000000000000002ULL	/* Chip warm reset */
+#define chipcHw_REG_SOFT_RESET_CHIP_SOFT                0x0000000000000001ULL	/* Chip soft reset */
+#define chipcHw_REG_SOFT_RESET_VDEC                     0x0000100000000000ULL	/* Video decoder */
+#define chipcHw_REG_SOFT_RESET_GE                       0x0000080000000000ULL	/* Graphics engine */
+#define chipcHw_REG_SOFT_RESET_OTP                      0x0000040000000000ULL	/* Reset OTP */
+#define chipcHw_REG_SOFT_RESET_USB2                     0x0000020000000000ULL	/* Reset USB2 */
+#define chipcHw_REG_SOFT_RESET_USB1                     0x0000010000000000ULL	/* Reset USB 1 */
+#define chipcHw_REG_SOFT_RESET_USB                      0x0000008000000000ULL	/* Reset USB 1 and USB2 soft reset */
+#define chipcHw_REG_SOFT_RESET_ESW                      0x0000004000000000ULL	/* Reset Ethernet switch */
+#define chipcHw_REG_SOFT_RESET_ESWCLK                   0x0000002000000000ULL	/* Reset Ethernet switch clock */
+#define chipcHw_REG_SOFT_RESET_DDRPHY                   0x0000001000000000ULL	/* Reset DDR Physical */
+#define chipcHw_REG_SOFT_RESET_DDR                      0x0000000800000000ULL	/* Reset DDR Controller */
+#define chipcHw_REG_SOFT_RESET_TSC                      0x0000000400000000ULL	/* Reset Touch screen */
+#define chipcHw_REG_SOFT_RESET_PCM                      0x0000000200000000ULL	/* Reset PCM device */
+#define chipcHw_REG_SOFT_RESET_APM                      0x0000200100000000ULL	/* Reset APM device */
+
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD        0x8000000000000000ULL	/* Unhold Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD               0x4000000000000000ULL	/* Unhold VPM */
+#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD               0x2000000000000000ULL	/* Unhold ARM reset  */
+#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK              0xF000000000000000ULL	/* Mask to handle unhold request */
+
+/* Audio channel control defines */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL            0x00000001	/* Enable all audio channel */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A              0x00000002	/* Enable channel A */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B              0x00000004	/* Enable channel B */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C              0x00000008	/* Enable channel C */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK      0x00000010	/* Enable NTP clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK     0x00000020	/* Enable PCM0 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK     0x00000040	/* Enable PCM1 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK      0x00000080	/* Enable APM clock */
+
+/* Misc. chip control defines */
+#define chipcHw_REG_MISC_CTRL_GE_SEL                    0x00040000	/* Select GE2/GE3 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO           0x00020000	/* Use external clock via GPIO pin 26 for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S0 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO           0x00010000	/* Use external clock via GPIO pin 45 for I2S0 */
+#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE          0x00008000	/* Disable ARM CP15 bit */
+#define chipcHw_REG_MISC_CTRL_RTC_DISABLE               0x00000008	/* Disable RTC registers */
+#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE             0x00000004	/* Disable Battery Backed RAM */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST             0x00000002	/* Set USB as host */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE           0xFFFFFFFD	/* Set USB as device */
+#define chipcHw_REG_MISC_CTRL_USB_POWERON               0xFFFFFFFE	/* Power up USB */
+#define chipcHw_REG_MISC_CTRL_USB_POWEROFF              0x00000001	/* Power down USB */
+
+/* OTP configuration defines */
+#define chipcHw_REG_OTP_SECURITY_OFF                    0x0000020000000000ULL	/* Security support is OFF */
+#define chipcHw_REG_OTP_SPU_SLOW                        0x0000010000000000ULL	/* Limited SPU throughput */
+#define chipcHw_REG_OTP_LCD_SPEED                       0x0000000600000000ULL	/* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_1                     0x0000000100000000ULL	/* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_0                     0x0000000080000000ULL	/* Set VPM speed zero */
+#define chipcHw_REG_OTP_AXI_SPEED                       0x0000000060000000ULL	/* Set maximum AXI bus speed */
+#define chipcHw_REG_OTP_APM_DISABLE                     0x000000001F000000ULL	/* Disable APM */
+#define chipcHw_REG_OTP_PIF_DISABLE                     0x0000000000200000ULL	/* Disable PIF */
+#define chipcHw_REG_OTP_VDEC_DISABLE                    0x0000000000100000ULL	/* Disable Video decoder */
+#define chipcHw_REG_OTP_BBL_DISABLE                     0x0000000000080000ULL	/* Disable RTC and BBRAM */
+#define chipcHw_REG_OTP_LED_DISABLE                     0x0000000000040000ULL	/* Disable LED */
+#define chipcHw_REG_OTP_GE_DISABLE                      0x0000000000020000ULL	/* Disable Graphics Engine */
+#define chipcHw_REG_OTP_LCD_DISABLE                     0x0000000000010000ULL	/* Disable LCD */
+#define chipcHw_REG_OTP_KEYPAD_DISABLE                  0x0000000000008000ULL	/* Disable keypad */
+#define chipcHw_REG_OTP_UART_DISABLE                    0x0000000000004000ULL	/* Disable UART */
+#define chipcHw_REG_OTP_SDIOH_DISABLE                   0x0000000000003000ULL	/* Disable SDIO host */
+#define chipcHw_REG_OTP_HSS_DISABLE                     0x0000000000000C00ULL	/* Disable HSS */
+#define chipcHw_REG_OTP_TSC_DISABLE                     0x0000000000000200ULL	/* Disable touch screen */
+#define chipcHw_REG_OTP_USB_DISABLE                     0x0000000000000180ULL	/* Disable USB */
+#define chipcHw_REG_OTP_SGMII_DISABLE                   0x0000000000000060ULL	/* Disable SGMII */
+#define chipcHw_REG_OTP_ETH_DISABLE                     0x0000000000000018ULL	/* Disable gigabit ethernet */
+#define chipcHw_REG_OTP_ETH_PHY_DISABLE                 0x0000000000000006ULL	/* Disable ethernet PHY */
+#define chipcHw_REG_OTP_VPM_DISABLE                     0x0000000000000001ULL	/* Disable VPM */
+
+/* Sticky bit defines */
+#define chipcHw_REG_STICKY_BOOT_DONE                    0x00000001	/* Boot done */
+#define chipcHw_REG_STICKY_SOFT_RESET                   0x00000002	/* ARM soft reset */
+#define chipcHw_REG_STICKY_GENERAL_1                    0x00000004	/* General purpose bit 1 */
+#define chipcHw_REG_STICKY_GENERAL_2                    0x00000008	/* General purpose bit 2 */
+#define chipcHw_REG_STICKY_GENERAL_3                    0x00000010	/* General purpose bit 3 */
+#define chipcHw_REG_STICKY_GENERAL_4                    0x00000020	/* General purpose bit 4 */
+#define chipcHw_REG_STICKY_GENERAL_5                    0x00000040	/* General purpose bit 5 */
+#define chipcHw_REG_STICKY_POR_BROM                     0x00000080	/* Special sticky bit for security - set in BROM to avoid other modes being entered */
+#define chipcHw_REG_STICKY_ARM_RESET                    0x00000100	/* ARM reset */
+#define chipcHw_REG_STICKY_CHIP_SOFT_RESET              0x00000200	/* Chip soft reset */
+#define chipcHw_REG_STICKY_CHIP_WARM_RESET              0x00000400	/* Chip warm reset */
+#define chipcHw_REG_STICKY_WDOG_RESET                   0x00000800	/* Watchdog reset */
+#define chipcHw_REG_STICKY_OTP_RESET                    0x00001000	/* OTP reset */
+
+							/* HW phase alignment defines *//* Spare1 register definitions */
+#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE        0x80000000	/* Enable DDR phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE        0x40000000	/* Enable VPM phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE        0x00000002	/* Enable access to VPM using system BUS */
+#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE        0x00000001	/* Enable access to DDR using system BUS */
+							/* DDRPhaseCtrl1 register definitions */
+#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable DDR SW phase alignment */
+#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK             0x0000007F	/* DDR lower threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT            23
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK             0x0000007F	/* DDR upper threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT            16
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to run next DDR phase alignment */
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
+							/* VPMPhaseCtrl1 register definitions */
+#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable VPM SW phase alignment */
+#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK             0x0000007F	/* VPM lower threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT            23
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK             0x0000007F	/* VPM upper threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT            16
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to complete the VPM phase alignment */
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
+							/* PhaseAlignStatus register definitions */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS             0x80000000	/* DDR time out interrupt status */
+#define chipcHw_REG_DDR_PHASE_STATUS_MASK               0x0000007F	/* DDR phase status value */
+#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT              24
+#define chipcHw_REG_DDR_PHASE_ALIGNED                   0x00800000	/* DDR Phase aligned status */
+#define chipcHw_REG_DDR_LOAD                            0x00400000	/* Load DDR phase status */
+#define chipcHw_REG_DDR_PHASE_CTRL_MASK                 0x0000003F	/* DDR phase control value */
+#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT                16
+#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS             0x80000000	/* VPM time out interrupt status */
+#define chipcHw_REG_VPM_PHASE_STATUS_MASK               0x0000007F	/* VPM phase status value */
+#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT              8
+#define chipcHw_REG_VPM_PHASE_ALIGNED                   0x00000080	/* VPM Phase aligned status */
+#define chipcHw_REG_VPM_LOAD                            0x00000040	/* Load VPM phase status */
+#define chipcHw_REG_VPM_PHASE_CTRL_MASK                 0x0000003F	/* VPM phase control value */
+#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT                0
+							/* DDRPhaseCtrl2 register definitions */
+#define chipcHw_REG_DDR_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT     20
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait to settle ph_ctrl and load_ch */
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT       0
+							/* VPMPhaseCtrl2 register definitions */
+#define chipcHw_REG_VPM_INTR_SELECT_MASK                0x00000003	/* Interrupt select */
+#define chipcHw_REG_VPM_INTR_SELECT_SHIFT               26
+#define chipcHw_REG_VPM_INTR_DISABLE                    0x00000000
+#define chipcHw_REG_VPM_INTR_FAST                       (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_MEDIUM                     (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SLOW                       (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT     20
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait cycle to settle ph_ctrl and load_ch */
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT       0
+
+#endif /* CHIPCHW_REG_H */
-- 
GitLab


From 2c4b57a204669a7b649f3eb891d3d0f0eba75321 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:05:37 +0100
Subject: [PATCH 217/257] ARM: 5655/1: bcmring: add csp chipc hardware
 definition file

add csp chipc hardware definition file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../include/mach/csp/chipcHw_def.h            | 1123 +++++++++++++++++
 1 file changed, 1123 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h

diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
new file mode 100644
index 00000000000..70eaea866cf
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
@@ -0,0 +1,1123 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_DEF_H
+#define CHIPC_DEF_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+
+/* ---- Public Constants and Types ---------------------------------------- */
+
+/* Set 1 to configure DDR/VPM phase alignment by HW */
+#define chipcHw_DDR_HW_PHASE_ALIGN    0
+#define chipcHw_VPM_HW_PHASE_ALIGN    0
+
+typedef uint32_t chipcHw_freq;
+
+/* Configurable miscellaneous clocks */
+typedef enum {
+	chipcHw_CLOCK_DDR,	/* DDR PHY Clock */
+	chipcHw_CLOCK_ARM,	/* ARM Clock */
+	chipcHw_CLOCK_ESW,	/* Ethernet Switch Clock */
+	chipcHw_CLOCK_VPM,	/* VPM Clock */
+	chipcHw_CLOCK_ESW125,	/* Ethernet MII Clock */
+	chipcHw_CLOCK_UART,	/* UART Clock */
+	chipcHw_CLOCK_SDIO0,	/* SDIO 0 Clock */
+	chipcHw_CLOCK_SDIO1,	/* SDIO 1 Clock */
+	chipcHw_CLOCK_SPI,	/* SPI Clock */
+	chipcHw_CLOCK_ETM,	/* ARM ETM Clock */
+
+	chipcHw_CLOCK_BUS,	/* BUS Clock */
+	chipcHw_CLOCK_OTP,	/* OTP Clock */
+	chipcHw_CLOCK_I2C,	/* I2C Host Clock */
+	chipcHw_CLOCK_I2S0,	/* I2S 0 Host Clock */
+	chipcHw_CLOCK_RTBUS,	/* DDR PHY Configuration Clock */
+	chipcHw_CLOCK_APM100,	/* APM100 Clock */
+	chipcHw_CLOCK_TSC,	/* Touch screen Clock */
+	chipcHw_CLOCK_LED,	/* LED Clock */
+
+	chipcHw_CLOCK_USB,	/* USB Clock */
+	chipcHw_CLOCK_LCD,	/* LCD CLock */
+	chipcHw_CLOCK_APM,	/* APM Clock */
+
+	chipcHw_CLOCK_I2S1,	/* I2S 1 Host Clock */
+} chipcHw_CLOCK_e;
+
+/* System booting strap options */
+typedef enum {
+	chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART,
+	chipcHw_BOOT_DEVICE_SERIAL_FLASH =
+	    chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH,
+	chipcHw_BOOT_DEVICE_NOR_FLASH_16 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16,
+	chipcHw_BOOT_DEVICE_NAND_FLASH_8 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8,
+	chipcHw_BOOT_DEVICE_NAND_FLASH_16 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16
+} chipcHw_BOOT_DEVICE_e;
+
+/* System booting modes */
+typedef enum {
+	chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL,
+	chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW,
+	chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT,
+	chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET
+} chipcHw_BOOT_MODE_e;
+
+/* NAND Flash page size strap options */
+typedef enum {
+	chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512,
+	chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048,
+	chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096,
+	chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT
+} chipcHw_NAND_PAGESIZE_e;
+
+/* GPIO Pin function */
+typedef enum {
+	chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD,
+	chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH,
+	chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI,
+	chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART,
+	chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP,
+	chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS,
+	chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0,
+	chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1,
+	chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM,
+	chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S,
+	chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM,
+	chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG,
+	chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC,
+	chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO
+} chipcHw_GPIO_FUNCTION_e;
+
+/* PIN Output slew rate */
+typedef enum {
+	chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH,
+	chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL
+} chipcHw_PIN_SLEW_RATE_e;
+
+/* PIN Current drive strength */
+typedef enum {
+	chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA,
+	chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA,
+	chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA,
+	chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA,
+	chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA,
+	chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA
+} chipcHw_PIN_CURRENT_STRENGTH_e;
+
+/* PIN Pull up register settings */
+typedef enum {
+	chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE,
+	chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP,
+	chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN
+} chipcHw_PIN_PULL_e;
+
+/* PIN input type settings */
+typedef enum {
+	chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS,
+	chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST
+} chipcHw_PIN_INPUTTYPE_e;
+
+/* Allow/Disalow the support of spread spectrum  */
+typedef enum {
+	chipcHw_SPREAD_SPECTRUM_DISALLOW,	/* Spread spectrum support is not allowed */
+	chipcHw_SPREAD_SPECTRUM_ALLOW	/* Spread spectrum support is allowed */
+} chipcHw_SPREAD_SPECTRUM_e;
+
+typedef struct {
+	chipcHw_SPREAD_SPECTRUM_e ssSupport;	/* Allow/Disalow to support spread spectrum.
+						   If supported, call chipcHw_enableSpreadSpectrum ()
+						   to activate the spread spectrum with desired spread. */
+	uint32_t pllVcoFreqHz;	/* PLL VCO frequency in Hz */
+	uint32_t pll2VcoFreqHz;	/* PLL2 VCO frequency in Hz */
+	uint32_t busClockFreqHz;	/* Bus clock frequency in Hz */
+	uint32_t armBusRatio;	/* ARM clock : Bus clock */
+	uint32_t vpmBusRatio;	/* VPM clock : Bus clock */
+	uint32_t ddrBusRatio;	/* DDR clock : Bus clock */
+} chipcHw_INIT_PARAM_t;
+
+/* CHIP revision number */
+typedef enum {
+	chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0,
+	chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0
+} chipcHw_REV_NUMBER_e;
+
+typedef enum {
+	chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE,
+	chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST,
+	chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM,
+	chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW
+} chipcHw_VPM_HW_PHASE_INTR_e;
+
+typedef enum {
+	chipcHw_DDR_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for DDR phase align condition */
+	chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for DDR phase align condition */
+	chipcHw_DDR_HW_PHASE_MARGIN_WIDE	/*  Wider margin for DDR phase align condition */
+} chipcHw_DDR_HW_PHASE_MARGIN_e;
+
+typedef enum {
+	chipcHw_VPM_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for VPM phase align condition */
+	chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for VPM phase align condition */
+	chipcHw_VPM_HW_PHASE_MARGIN_WIDE	/*  Wider margin for VPM phase align condition */
+} chipcHw_VPM_HW_PHASE_MARGIN_e;
+
+#define chipcHw_XTAL_FREQ_Hz                    25000000	/* Reference clock frequency in Hz */
+
+/* Programable pin defines */
+#define chipcHw_PIN_GPIO(n)                     ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
+									     /* GPIO pin 0 - 60 */
+#define chipcHw_PIN_UARTTXD                     (chipcHw_GPIO_COUNT + 0)	/* UART Transmit */
+#define chipcHw_PIN_NVI_A                       (chipcHw_GPIO_COUNT + 1)	/* NVI Interface */
+#define chipcHw_PIN_NVI_D                       (chipcHw_GPIO_COUNT + 2)	/* NVI Interface */
+#define chipcHw_PIN_NVI_OEB                     (chipcHw_GPIO_COUNT + 3)	/* NVI Interface */
+#define chipcHw_PIN_NVI_WEB                     (chipcHw_GPIO_COUNT + 4)	/* NVI Interface */
+#define chipcHw_PIN_NVI_CS                      (chipcHw_GPIO_COUNT + 5)	/* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_CSB                (chipcHw_GPIO_COUNT + 6)	/* NVI Interface */
+#define chipcHw_PIN_NVI_FLASHWP                 (chipcHw_GPIO_COUNT + 7)	/* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_RDYB               (chipcHw_GPIO_COUNT + 8)	/* NVI Interface */
+#define chipcHw_PIN_CL_DATA_0_17                (chipcHw_GPIO_COUNT + 9)	/* LCD Data 0 - 17 */
+#define chipcHw_PIN_CL_DATA_18_20               (chipcHw_GPIO_COUNT + 10)	/* LCD Data 18 - 20 */
+#define chipcHw_PIN_CL_DATA_21_23               (chipcHw_GPIO_COUNT + 11)	/* LCD Data 21 - 23 */
+#define chipcHw_PIN_CL_POWER                    (chipcHw_GPIO_COUNT + 12)	/* LCD Power */
+#define chipcHw_PIN_CL_ACK                      (chipcHw_GPIO_COUNT + 13)	/* LCD Ack */
+#define chipcHw_PIN_CL_FP                       (chipcHw_GPIO_COUNT + 14)	/* LCD FP */
+#define chipcHw_PIN_CL_LP                       (chipcHw_GPIO_COUNT + 15)	/* LCD LP */
+#define chipcHw_PIN_UARTRXD                     (chipcHw_GPIO_COUNT + 16)	/* UART Receive */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the clock module
+*
+*/
+/****************************************************************************/
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Enables the PLL1
+*
+*  This function enables the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz,	/*  [ IN ] VCO frequency in Hz */
+			chipcHw_SPREAD_SPECTRUM_e ssSupport	/*  [ IN ] SS status */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Enables the PLL2
+*
+*  This function enables the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz	/*  [ IN ] VCO frequency in Hz */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void);
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in KHz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
+				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success ( # of adjustment required )
+*            -1 : On failure
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables core a clock of a certain device
+*
+*  This function enables a core clock
+*
+*  @return  void
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disabled a core clock of a certain device
+*
+*  This function disables a core clock
+*
+*  @return  void
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Enables bypass clock of a certain device
+*
+*  This function enables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disabled bypass clock of a certain device
+*
+*  This function disables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Get Numeric Chip ID
+*
+*  This function returns Chip ID that includes the revison number
+*
+*  @return  Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get Chip Product ID
+*
+*  This function returns Chip Product ID
+*
+*  @return  Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get revision number
+*
+*  This function returns revision number of the chip
+*
+*  @return  Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables bus interface clock
+*
+*  Enables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disables bus interface clock
+*
+*  Disables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Enables various audio channels
+*
+*  Enables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disables various audio channels
+*
+*  Disables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Soft resets devices
+*
+*  Soft resets various devices
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+static inline void chipcHw_softResetDisable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+static inline void chipcHw_softResetEnable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Configures misc CHIP functionality
+*
+*  Configures CHIP functionality
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+static inline void chipcHw_miscControlDisable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+static inline void chipcHw_miscControlEnable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Set OTP options
+*
+*  Set OTP options
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Get sticky bits
+*
+*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void);
+
+/****************************************************************************/
+/**
+*  @brief    Set sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Clear sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Get software override strap options
+*
+*  Retrieves software override strap options
+*
+*  @return   Software override strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Set software override strap options
+*
+*  set software override strap options
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions);
+
+/****************************************************************************/
+/**
+*  @brief    Get pin strap options
+*
+*  Retrieves pin strap options
+*
+*  @return   Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Get valid pin strap options
+*
+*  Retrieves valid pin strap options
+*
+*  @return   valid Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Initialize valid pin strap options
+*
+*  Retrieves valid pin strap options by copying HW strap options to soft register
+*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get status (enabled/disabled) of bus interface clock
+*
+*  This function returns the status of devices' bus interface clock
+*
+*  @return  Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get boot device
+*
+*  This function returns the device type used in booting the system
+*
+*  @return  Boot device of type chipcHw_BOOT_DEVICE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get boot mode
+*
+*  This function returns the way the system was booted
+*
+*  @return  Boot mode of type chipcHw_BOOT_MODE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash page size
+*
+*  This function returns the NAND device page size
+*
+*  @return  Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash address cycle configuration
+*
+*  This function returns the NAND flash address cycle configuration
+*
+*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void);
+
+/****************************************************************************/
+/**
+*  @brief   Activates PIF interface
+*
+*  This function activates PIF interface by taking control of LCD pins
+*
+*  @note
+*       When activated, LCD pins will be defined as follows for PIF operation
+*
+*       CLD[17:0]  = pif_data[17:0]
+*       CLD[23:18] = pif_address[5:0]
+*       CLPOWER    = pif_wr_str
+*       CLCP       = pif_rd_str
+*       CLAC       = pif_hat1
+*       CLFP       = pif_hrdy1
+*       CLLP       = pif_hat2
+*       GPIO[42]   = pif_hrdy2
+*
+*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Activates LCD interface
+*
+*  This function activates LCD interface
+*
+*  @note
+*       When activated, LCD pins will be defined as follows
+*
+*       CLD[17:0]  = LCD data
+*       CLD[23:18] = LCD data
+*       CLPOWER    = LCD power
+*       CLCP       =
+*       CLAC       = LCD ack
+*       CLFP       =
+*       CLLP       =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Deactivates PIF/LCD interface
+*
+*  This function deactivates PIF/LCD interface
+*
+*  @note
+*       When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin	/* GPIO Pin number */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,	/* GPIO Pin number */
+					      chipcHw_GPIO_FUNCTION_e func	/* Configuration function */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin slew rate
+*
+*  This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					  chipcHw_PIN_SLEW_RATE_e slewRate	/* Pin slew rate */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin output drive current
+*
+*  This function sets output drive current of individual pin
+*
+*  Note: Avoid the use of the word 'current' since linux headers define this
+*        to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					       chipcHw_PIN_CURRENT_STRENGTH_e curr	/* Pin current rating */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin pullup register
+*
+*  This function sets pullup register of individual  pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					chipcHw_PIN_PULL_e pullup	/* Pullup register settings */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin input type
+*
+*  This function sets input type of individual Pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					   chipcHw_PIN_INPUTTYPE_e inputType	/* Pin input type */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Retrieves a string representation of the mux setting for a pin.
+*
+*  @return  Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin);
+
+/****************************************************************************/
+/**  @brief issue warmReset
+ */
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask);
+
+/****************************************************************************/
+/**  @brief clock reconfigure
+ */
+/****************************************************************************/
+void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio,
+			   uint32_t ddrRatio);
+
+/****************************************************************************/
+/**
+*  @brief   Enable Spread Spectrum
+*
+*  @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**  @brief Checks if software strap is enabled
+ *
+ *   @return 1 : When enable
+ *           0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void);
+
+/****************************************************************************/
+/**  @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void);
+
+/****************************************************************************/
+/**  @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void);
+
+/****************************************************************************/
+/**  @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void);
+
+/****************************************************************************/
+/**  @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void);
+
+/****************************************************************************/
+/**  @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void);
+
+/****************************************************************************/
+/**  @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val);
+
+/****************************************************************************/
+/**  @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val);
+
+/****************************************************************************/
+/**  @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void);
+
+/****************************************************************************/
+/**  @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM SW phase alignment interrupt mode
+*
+*  This function sets VPM phase alignment interrupt
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode);
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin	/* Margin alinging DDR  phase */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin	/* Margin alinging VPM  phase */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Checks DDR phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+*  @brief   Checks VPM phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void);
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void);
+
+/****************************************************************************/
+/**
+*  @brief   Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void);
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#endif /* CHIPC_DEF_H */
-- 
GitLab


From 4818a4727d787b2da0dc73c66f04d241626f4c97 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:06:13 +0100
Subject: [PATCH 218/257] ARM: 5656/1: bcmring: add csp chipc inline functions

add csp chipc inline functions

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../include/mach/csp/chipcHw_inline.h         | 1673 +++++++++++++++++
 1 file changed, 1673 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h

diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
new file mode 100644
index 00000000000..c78833acb37
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
@@ -0,0 +1,1673 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_INLINE_H
+#define CHIPC_INLINE_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_def.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+typedef enum {
+	chipcHw_OPTYPE_BYPASS,	/* Bypass operation */
+	chipcHw_OPTYPE_OUTPUT	/* Output operation */
+} chipcHw_OPTYPE_e;
+
+/* ---- Public Constants and Types ---------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------- */
+/* ---- Public Function Prototypes ---------------------------------------- */
+/* ---- Private Function Prototypes --------------------------------------- */
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+				    chipcHw_OPTYPE_e type, int mode);
+
+/****************************************************************************/
+/**
+*  @brief   Get Numeric Chip ID
+*
+*  This function returns Chip ID that includes the revison number
+*
+*  @return  Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void)
+{
+	return pChipcHw->ChipId;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable Spread Spectrum
+*
+*  @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void)
+{
+	if ((pChipcHw->
+	     PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
+	    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
+		    (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
+		    (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
+		     ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
+		ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
+		    ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void)
+{
+	ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Chip Product ID
+*
+*  This function returns Chip Product ID
+*
+*  @return  Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void)
+{
+	return (pChipcHw->
+		 ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
+		chipcHw_REG_CHIPID_BASE_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get revision number
+*
+*  This function returns revision number of the chip
+*
+*  @return  Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
+{
+	return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables bus interface clock
+*
+*  Enables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX for mask
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->BusIntfClock, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables bus interface clock
+*
+*  Disables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->BusIntfClock, ~mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get status (enabled/disabled) of bus interface clock
+*
+*  This function returns the status of devices' bus interface clock
+*
+*  @return  Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
+{
+	return pChipcHw->BusIntfClock;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables various audio channels
+*
+*  Enables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->AudioEnable, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables various audio channels
+*
+*  Disables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->AudioEnable, ~mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Soft resets devices
+*
+*  Soft resets various devices
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask)
+{
+	chipcHw_softResetEnable(mask);
+	chipcHw_softResetDisable(mask);
+}
+
+static inline void chipcHw_softResetDisable(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+	/* Deassert module soft reset */
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->SoftReset1 ^= ctrl1;
+	pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void chipcHw_softResetEnable(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+	uint32_t unhold = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->SoftReset1 |= ctrl1;
+	/* Mask out unhold request bits */
+	pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+
+	/* Process unhold requests */
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
+		unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD;
+	}
+
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) {
+		unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD;
+	}
+
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) {
+		unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD;
+	}
+
+	if (unhold) {
+		/* Make sure unhold request is effective */
+		pChipcHw->SoftReset1 &= ~unhold;
+	}
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Configures misc CHIP functionality
+*
+*  Configures CHIP functionality
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask)
+{
+	reg32_write(&pChipcHw->MiscCtrl, mask);
+}
+
+static inline void chipcHw_miscControlDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl, ~mask);
+}
+
+static inline void chipcHw_miscControlEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set OTP options
+*
+*  Set OTP options
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+	reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1);
+	reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Get sticky bits
+*
+*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void)
+{
+	return pChipcHw->Sticky;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask)
+{
+	uint32_t bits = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	if (mask & chipcHw_REG_STICKY_POR_BROM) {
+		bits |= chipcHw_REG_STICKY_POR_BROM;
+	} else {
+		uint32_t sticky;
+		sticky = pChipcHw->Sticky;
+
+		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
+			bits |= chipcHw_REG_STICKY_BOOT_DONE;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_1;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_2;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_3;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_4;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_5;
+		}
+	}
+	pChipcHw->Sticky = bits;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Clear sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask)
+{
+	uint32_t bits = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	if (mask &
+	    (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
+	     chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
+	     chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
+		uint32_t sticky = pChipcHw->Sticky;
+
+		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
+			bits = chipcHw_REG_STICKY_BOOT_DONE;
+			mask &= ~chipcHw_REG_STICKY_BOOT_DONE;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_1)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_1;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_1;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_2)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_2;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_2;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_3)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_3;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_3;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_4)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_4;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_4;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_5)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_5;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_5;
+		}
+	}
+	pChipcHw->Sticky = bits | mask;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Get software strap value
+*
+*  Retrieves software strap value
+*
+*  @return   Software strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void)
+{
+	return pChipcHw->SoftStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set software override strap options
+*
+*  set software override strap options
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions)
+{
+	reg32_write(&pChipcHw->SoftStraps, strapOptions);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Pin Strap Options
+*
+*  This function returns the raw boot strap options
+*
+*  @return  strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void)
+{
+	return pChipcHw->PinStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Valid Strap Options
+*
+*  This function returns the valid raw boot strap options
+*
+*  @return  strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void)
+{
+	uint32_t softStraps;
+
+	/*
+	 ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps
+	 ** which copies HW straps to soft straps if there is no override
+	 */
+	softStraps = chipcHw_getSoftStraps();
+
+	return softStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Initialize valid pin strap options
+*
+*  Retrieves valid pin strap options by copying HW strap options to soft register
+*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void)
+{
+	uint32_t softStraps;
+
+	REG_LOCAL_IRQ_SAVE;
+	softStraps = chipcHw_getSoftStraps();
+
+	if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) {
+		/* Copy HW straps to software straps */
+		chipcHw_setSoftStraps(chipcHw_getPinStraps());
+	}
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get boot device
+*
+*  This function returns the device type used in booting the system
+*
+*  @return  Boot device of type chipcHw_BOOT_DEVICE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get boot mode
+*
+*  This function returns the way the system was booted
+*
+*  @return  Boot mode of type chipcHw_BOOT_MODE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash page size
+*
+*  This function returns the NAND device page size
+*
+*  @return  Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash address cycle configuration
+*
+*  This function returns the NAND flash address cycle configuration
+*
+*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void)
+{
+	if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) {
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Activates PIF interface
+*
+*  This function activates PIF interface by taking control of LCD pins
+*
+*  @note
+*       When activated, LCD pins will be defined as follows for PIF operation
+*
+*       CLD[17:0]  = pif_data[17:0]
+*       CLD[23:18] = pif_address[5:0]
+*       CLPOWER    = pif_wr_str
+*       CLCP       = pif_rd_str
+*       CLAC       = pif_hat1
+*       CLFP       = pif_hrdy1
+*       CLLP       = pif_hat2
+*       GPIO[42]   = pif_hrdy2
+*
+*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Activates LCD interface
+*
+*  This function activates LCD interface
+*
+*  @note
+*       When activated, LCD pins will be defined as follows
+*
+*       CLD[17:0]  = LCD data
+*       CLD[23:18] = LCD data
+*       CLPOWER    = LCD power
+*       CLCP       =
+*       CLAC       = LCD ack
+*       CLFP       =
+*       CLLP       =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Deactivates PIF/LCD interface
+*
+*  This function deactivates PIF/LCD interface
+*
+*  @note
+*       When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, 0);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Select GE2
+*
+*  This function select GE2 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE2(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Select GE3
+*
+*  This function select GE3 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE3(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
+{
+	return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
+		(chipcHw_REG_GPIO_MUX_MASK <<
+		 chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
+	    chipcHw_REG_GPIO_MUX_POSITION(pin);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,
+					      chipcHw_GPIO_FUNCTION_e func)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &=
+	    ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |=
+	    func << chipcHw_REG_GPIO_MUX_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin slew rate
+*
+*  This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,
+					  chipcHw_PIN_SLEW_RATE_e slewRate)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &=
+	    ~(chipcHw_REG_SLEW_RATE_MASK <<
+	      chipcHw_REG_SLEW_RATE_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |=
+	    (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin output drive current
+*
+*  This function sets output drive current of individual pin
+*
+*  Note: Avoid the use of the word 'current' since linux headers define this
+*        to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,
+					       chipcHw_PIN_CURRENT_STRENGTH_e
+					       curr)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_CURRENT(pin)) &=
+	    ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_CURRENT(pin)) |=
+	    (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin pullup register
+*
+*  This function sets pullup register of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_PULLUP(pin)) &=
+	    ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_PULLUP(pin)) |=
+	    (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin input type
+*
+*  This function sets input type of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,
+					   chipcHw_PIN_INPUTTYPE_e inputType)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &=
+	    ~(chipcHw_REG_INPUTTYPE_MASK <<
+	      chipcHw_REG_INPUTTYPE_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |=
+	    (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Power up the USB PHY
+*
+*  This function powers up the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerUpUsbPhy(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl,
+			 chipcHw_REG_MISC_CTRL_USB_POWERON);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Power down the USB PHY
+*
+*  This function powers down the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerDownUsbPhy(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl,
+			chipcHw_REG_MISC_CTRL_USB_POWEROFF);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set the 2nd USB as host
+*
+*  This function sets the 2nd USB as host
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbHost(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl,
+			chipcHw_REG_MISC_CTRL_USB_MODE_HOST);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set the 2nd USB as device
+*
+*  This function sets the 2nd USB as device
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbDevice(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl,
+			 chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Lower layer funtion to enable/disable a clock of a certain device
+*
+*  This function enables/disables a core clock
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+				    chipcHw_OPTYPE_e type, int mode)
+{
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		pPLLReg = &pChipcHw->DDRClock;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		break;
+	case chipcHw_CLOCK_VPM:
+		pPLLReg = &pChipcHw->VPMClock;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		switch (type) {
+		case chipcHw_OPTYPE_OUTPUT:
+			/* PLL clock output enable/disable */
+			if (mode) {
+				if (clock == chipcHw_CLOCK_DDR) {
+					/* DDR clock enable is inverted */
+					reg32_modify_and(pPLLReg,
+							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				} else {
+					reg32_modify_or(pPLLReg,
+							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				}
+			} else {
+				if (clock == chipcHw_CLOCK_DDR) {
+					/* DDR clock disable is inverted */
+					reg32_modify_or(pPLLReg,
+							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				} else {
+					reg32_modify_and(pPLLReg,
+							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				}
+			}
+			break;
+		case chipcHw_OPTYPE_BYPASS:
+			/* PLL clock bypass enable/disable */
+			if (mode) {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+			} else {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+			}
+			break;
+		}
+	} else if (pClockCtrl) {
+		switch (type) {
+		case chipcHw_OPTYPE_OUTPUT:
+			if (mode) {
+				reg32_modify_or(pClockCtrl,
+						chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+			} else {
+				reg32_modify_and(pClockCtrl,
+						 ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+			}
+			break;
+		case chipcHw_OPTYPE_BYPASS:
+			if (mode) {
+				reg32_modify_or(pClockCtrl,
+						chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+			} else {
+				reg32_modify_and(pClockCtrl,
+						 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+			}
+			break;
+		}
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables a core clock of a certain device
+*
+*  This function disables a core clock
+*
+*  @note    no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock)
+{
+
+	/* Disable output of the clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable a core clock of a certain device
+*
+*  This function enables a core clock
+*
+*  @note    no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock)
+{
+
+	/* Enable output of the clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables bypass clock of a certain device
+*
+*  This function enables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock)
+{
+	/* Enable bypass clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disabled bypass clock of a certain device
+*
+*  This function disables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock)
+{
+	/* Disable bypass clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0);
+
+}
+
+/****************************************************************************/
+/**  @brief Checks if software strap is enabled
+ *
+ *   @return 1 : When enable
+ *           0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void)
+{
+	return pChipcHw->SoftStraps & 0x00000001;
+}
+
+/****************************************************************************/
+/**  @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void)
+{
+	reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001);
+}
+
+/****************************************************************************/
+/**  @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void)
+{
+	reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001));
+}
+
+/****************************************************************************/
+/**  @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void)
+{
+	reg32_modify_or(&pChipcHw->PLLConfig,
+			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void)
+{
+	reg32_modify_or(&pChipcHw->PLLConfig2,
+			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void)
+{
+	reg32_modify_and(&pChipcHw->PLLConfig,
+			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void)
+{
+	reg32_modify_and(&pChipcHw->PLLConfig2,
+			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void)
+{
+	return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/**  @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void)
+{
+	return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/**  @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+	pChipcHw->PLLConfig |=
+	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val)
+{
+
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+	pChipcHw->PLLConfig2 |=
+	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**  @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void)
+{
+	return (uint8_t) ((pChipcHw->
+			   PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**  @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void)
+{
+	return (uint8_t) ((pChipcHw->
+			   PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM SW phase alignment interrupt mode
+*
+*  This function sets VPM phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode)
+{
+	REG_LOCAL_IRQ_SAVE;
+	if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) {
+		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+	} else {
+		pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+	}
+	pChipcHw->VPMPhaseCtrl2 =
+	    (pChipcHw->
+	     VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK <<
+			       chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin)
+{
+	uint32_t ge = 0;
+	uint32_t le = 0;
+
+	switch (margin) {
+	case chipcHw_DDR_HW_PHASE_MARGIN_STRICT:
+		ge = 0x0F;
+		le = 0x0F;
+		break;
+	case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM:
+		ge = 0x03;
+		le = 0x3F;
+		break;
+	case chipcHw_DDR_HW_PHASE_MARGIN_WIDE:
+		ge = 0x01;
+		le = 0x7F;
+		break;
+	}
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->DDRPhaseCtrl1 &=
+		    ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK <<
+		       chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+		      || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK <<
+			  chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+		pChipcHw->DDRPhaseCtrl1 |=
+		    ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+		     || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin)
+{
+	uint32_t ge = 0;
+	uint32_t le = 0;
+
+	switch (margin) {
+	case chipcHw_VPM_HW_PHASE_MARGIN_STRICT:
+		ge = 0x0F;
+		le = 0x0F;
+		break;
+	case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM:
+		ge = 0x03;
+		le = 0x3F;
+		break;
+	case chipcHw_VPM_HW_PHASE_MARGIN_WIDE:
+		ge = 0x01;
+		le = 0x7F;
+		break;
+	}
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->VPMPhaseCtrl1 &=
+		    ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK <<
+		       chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+		      || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK <<
+			  chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+		pChipcHw->VPMPhaseCtrl1 |=
+		    ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+		     || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Checks DDR phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Checks VPM phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
+	    chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
+	    chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
+	    chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
+	    chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl2 &=
+	    ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK <<
+	      chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT);
+	pChipcHw->DDRPhaseCtrl2 |=
+	    (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) <<
+	    chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl2 &=
+	    ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK <<
+	      chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT);
+	pChipcHw->VPMPhaseCtrl2 |=
+	    (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) <<
+	    chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	/* Clear timeout interrupt service bit */
+	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED;
+	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	/* Clear timeout interrupt service bit */
+	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED;
+	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	chipcHw_ddrHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
+	/* Enable timeout interrupt */
+	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	chipcHw_vpmHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
+	/* Enable timeout interrupt */
+	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+#endif /* CHIPC_INLINE_H */
-- 
GitLab


From 638ee2db1916de4da144f0ed6d156181ede20a41 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:06:47 +0100
Subject: [PATCH 219/257] ARM: 5657/1: bcmring: add csp chipc block source code

add csp chipc block source code

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/chipc/Makefile      |   1 +
 arch/arm/mach-bcmring/csp/chipc/chipcHw.c     | 776 ++++++++++++++++++
 .../arm/mach-bcmring/csp/chipc/chipcHw_init.c | 293 +++++++
 .../mach-bcmring/csp/chipc/chipcHw_reset.c    | 124 +++
 arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c |  64 ++
 5 files changed, 1258 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/Makefile
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw.c
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c

diff --git a/arch/arm/mach-bcmring/csp/chipc/Makefile b/arch/arm/mach-bcmring/csp/chipc/Makefile
new file mode 100644
index 00000000000..673952768ee
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/Makefile
@@ -0,0 +1 @@
+obj-y += chipcHw.o chipcHw_str.o chipcHw_reset.o chipcHw_init.o
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
new file mode 100644
index 00000000000..b3a61d860c6
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -0,0 +1,776 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw.c
+*
+*  @brief   Low level Various CHIP clock controlling routines
+*
+*  @note
+*
+*   These routines provide basic clock controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+/* VPM alignment algorithm uses this */
+#define MAX_PHASE_ADJUST_COUNT         0xFFFF	/* Max number of times allowed to adjust the phase */
+#define MAX_PHASE_ALIGN_ATTEMPTS       10	/* Max number of attempt to align the phase */
+
+/* Local definition of clock type */
+#define PLL_CLOCK                      1	/* PLL Clock */
+#define NON_PLL_CLOCK                  2	/* Divider clock */
+
+static int chipcHw_divide(int num, int denom)
+    __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in hertz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    ) {
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
+	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
+	uint32_t dependentClockType = 0;
+	uint32_t vcoHz = 0;
+
+	/* Get VCO frequencies */
+	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		uint64_t adjustFreq = 0;
+
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+		vcoFreqPll1Hz += (uint32_t) adjustFreq;
+	} else {
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+	}
+	vcoFreqPll2Hz =
+	    chipcHw_XTAL_FREQ_Hz *
+		 chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		pPLLReg = &pChipcHw->DDRClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_VPM:
+		pPLLReg = &pChipcHw->VPMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		pDependentClock = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		pDependentClock = &pChipcHw->ACLKClock;
+		dependentClockType = NON_PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		pDependentClock = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		/* Obtain PLL clock frequency */
+		if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+			/* Return crystal clock frequency when bypassed */
+			return chipcHw_XTAL_FREQ_Hz;
+		} else if (clock == chipcHw_CLOCK_DDR) {
+			/* DDR frequency is configured in PLLDivider register */
+			return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+		} else {
+			/* From chip revision number B0, LCD clock is internally divided by 2 */
+			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+				vcoHz >>= 1;
+			}
+			/* Obtain PLL clock frequency using VCO dividers */
+			return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+		}
+	} else if (pClockCtrl) {
+		/* Obtain divider clock frequency */
+		uint32_t div;
+		uint32_t freq = 0;
+
+		if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+			/* Return crystal clock frequency when bypassed */
+			return chipcHw_XTAL_FREQ_Hz;
+		} else if (pDependentClock) {
+			/* Identify the dependent clock frequency */
+			switch (dependentClockType) {
+			case PLL_CLOCK:
+				if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+					/* Use crystal clock frequency when dependent PLL clock is bypassed */
+					freq = chipcHw_XTAL_FREQ_Hz;
+				} else {
+					/* Obtain PLL clock frequency using VCO dividers */
+					div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
+					freq = div ? chipcHw_divide(vcoHz, div) : 0;
+				}
+				break;
+			case NON_PLL_CLOCK:
+				if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+					freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+				} else {
+					if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+						/* Use crystal clock frequency when dependent divider clock is bypassed */
+						freq = chipcHw_XTAL_FREQ_Hz;
+					} else {
+						/* Obtain divider clock frequency using XTAL dividers */
+						div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+						freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
+					}
+				}
+				break;
+			}
+		} else {
+			/* Dependent on crystal clock */
+			freq = chipcHw_XTAL_FREQ_Hz;
+		}
+
+		div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+		return chipcHw_divide(freq, (div ? div : 256));
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
+				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
+    ) {
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
+	uint32_t desVcoFreqPll1Hz = 0;	/* Desired VCO frequency for PLL1 in Hz */
+	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
+	uint32_t dependentClockType = 0;
+	uint32_t vcoHz = 0;
+	uint32_t desVcoHz = 0;
+
+	/* Get VCO frequencies */
+	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		uint64_t adjustFreq = 0;
+
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+		vcoFreqPll1Hz += (uint32_t) adjustFreq;
+
+		/* Desired VCO frequency */
+		desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		      chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
+	} else {
+		vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+	}
+	vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		/* Configure the DDR_ctrl:BUS ratio settings */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			/* Dvide DDR_phy by two to obtain DDR_ctrl clock */
+			pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+		pPLLReg = &pChipcHw->DDRClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_VPM:
+		/* Configure the VPM:BUS ratio settings */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+		pPLLReg = &pChipcHw->VPMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		pDependentClock = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		pDependentClock = &pChipcHw->ACLKClock;
+		dependentClockType = NON_PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		pDependentClock = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		/* Select XTAL as bypass source */
+		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO);
+		reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+		/* For DDR settings use only the PLL divider clock */
+		if (pPLLReg == &pChipcHw->DDRClock) {
+			/* Set M1DIV for PLL1, which controls the DDR clock */
+			reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
+			/* Calculate expected frequency */
+			freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+		} else {
+			/* From chip revision number B0, LCD clock is internally divided by 2 */
+			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+				desVcoHz >>= 1;
+				vcoHz >>= 1;
+			}
+			/* Set MDIV to change the frequency */
+			reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
+			reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
+			/* Calculate expected frequency */
+			freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+		}
+		/* Wait for for atleast 200ns as per the protocol to change frequency */
+		udelay(1);
+		/* Do not bypass */
+		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+		/* Return the configured frequency */
+		return freq;
+	} else if (pClockCtrl) {
+		uint32_t divider = 0;
+
+		/* Divider clock should not be bypassed  */
+		reg32_modify_and(pClockCtrl,
+				 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+
+		/* Identify the clock source */
+		if (pDependentClock) {
+			switch (dependentClockType) {
+			case PLL_CLOCK:
+				divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
+				break;
+			case NON_PLL_CLOCK:
+				{
+					uint32_t sourceClock = 0;
+
+					if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+						sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+					} else {
+						uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+						sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
+					}
+					divider = chipcHw_divide(sourceClock, freq);
+				}
+				break;
+			}
+		} else {
+			divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq);
+		}
+
+		if (divider) {
+			REG_LOCAL_IRQ_SAVE;
+			/* Set the divider to obtain the required frequency */
+			*pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
+			REG_LOCAL_IRQ_RESTORE;
+			return freq;
+		}
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(chipcHw_setClockFrequency);
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock for Chip Rev #A0
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success (# of adjustment required)
+*            -1 : On failure
+*
+*/
+/****************************************************************************/
+static int vpmPhaseAlignA0(void)
+{
+	uint32_t phaseControl;
+	uint32_t phaseValue;
+	uint32_t prevPhaseComp;
+	int iter = 0;
+	int adjustCount = 0;
+	int count = 0;
+
+	for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
+		phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
+		phaseValue = 0;
+		prevPhaseComp = 0;
+
+		/* Step 1: Look for falling PH_COMP transition */
+
+		/* Read the contents of VPM Clock resgister */
+		phaseValue = pChipcHw->VPMClock;
+		do {
+			/* Store previous value of phase comparator */
+			prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Read the contents of  VPM Clock resgister. */
+			phaseValue = pChipcHw->VPMClock;
+
+			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+				phaseControl = (0x3F & (phaseControl - 1));
+			} else {
+				/* Increment to the Phase count value for next write, if Phase is not stable. */
+				phaseControl = (0x3F & (phaseControl + 1));
+			}
+			/* Count number of adjustment made */
+			adjustCount++;
+		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) ||	/* Look for a transition */
+			  ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) &&	/* Look for a falling edge */
+			 (adjustCount < MAX_PHASE_ADJUST_COUNT)	/* Do not exceed the limit while trying */
+		    );
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		/* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */
+
+		for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+			phaseControl = (0x3F & (phaseControl + 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if (count != 5) {
+			/* Detected false transition */
+			continue;
+		}
+
+		/* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */
+
+		for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+			phaseControl = (0x3F & (phaseControl - 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if (count != 3) {
+			/* Detected noisy transition */
+			continue;
+		}
+
+		/* Step 4: Keep moving backward before the original transition took place. */
+
+		for (count = 0; (count < 5); count++) {
+			phaseControl = (0x3F & (phaseControl - 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) {
+			/* Detected false transition */
+			continue;
+		}
+
+		/* Step 5: Re discover the valid transition */
+
+		do {
+			/* Store previous value of phase comparator */
+			prevPhaseComp = phaseValue;
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^=
+			    chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Read the contents of  VPM Clock resgister. */
+			phaseValue = pChipcHw->VPMClock;
+
+			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+				phaseControl = (0x3F & (phaseControl - 1));
+			} else {
+				/* Increment to the Phase count value for next write, if Phase is not stable. */
+				phaseControl = (0x3F & (phaseControl + 1));
+			}
+
+			/* Count number of adjustment made */
+			adjustCount++;
+		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT));
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries  */
+			return -1;
+		} else {
+			/* Valid phase must have detected */
+			break;
+		}
+	}
+
+	/* For VPM Phase should be perfectly aligned. */
+	phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
+		/* Load new phase value */
+		pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+	/* Return the status */
+	return (int)adjustCount;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success (# of adjustment required)
+*            -1 : On failure
+*
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void)
+{
+
+	if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) {
+		return vpmPhaseAlignA0();
+	} else {
+		uint32_t phaseControl = chipcHw_getVpmPhaseControl();
+		uint32_t phaseValue = 0;
+		int adjustCount = 0;
+
+		/* Disable VPM access */
+		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+		/* Disable HW VPM phase alignment  */
+		chipcHw_vpmHwPhaseAlignDisable();
+		/* Enable SW VPM phase alignment  */
+		chipcHw_vpmSwPhaseAlignEnable();
+		/* Adjust VPM phase */
+		while (adjustCount < MAX_PHASE_ADJUST_COUNT) {
+			phaseValue = chipcHw_getVpmHwPhaseAlignStatus();
+
+			/* Adjust phase control value */
+			if (phaseValue > 0xF) {
+				/* Increment phase control value */
+				phaseControl++;
+			} else if (phaseValue < 0xF) {
+				/* Decrement phase control value */
+				phaseControl--;
+			} else {
+				/* Enable VPM access */
+				pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+				/* Return adjust count */
+				return adjustCount;
+			}
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Count adjustment */
+			adjustCount++;
+		}
+	}
+
+	/* Disable VPM access */
+	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+	return -1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Local Divide function
+*
+*  This function does the divide
+*
+*  @return divide value
+*
+*/
+/****************************************************************************/
+static int chipcHw_divide(int num, int denom)
+{
+	int r;
+	int t = 1;
+
+	/* Shift denom and t up to the largest value to optimize algorithm */
+	/* t contains the units of each divide */
+	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
+		denom = denom << 1;
+		t = t << 1;
+	}
+
+	/* Intialize the result */
+	r = 0;
+
+	do {
+		/* Determine if there exists a positive remainder */
+		if ((num - denom) >= 0) {
+			/* Accumlate t to the result and calculate a new remainder */
+			num = num - denom;
+			r = r + t;
+		}
+		/* Continue to shift denom and shift t down to 0 */
+		denom = denom >> 1;
+		t = t >> 1;
+	} while (t != 0);
+
+	return r;
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
new file mode 100644
index 00000000000..367df75d4bb
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
@@ -0,0 +1,293 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw_init.c
+*
+*  @brief   Low level CHIPC PLL configuration functions
+*
+*  @note
+*
+*   These routines provide basic PLL controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+/* ---- Private Constants and Types --------------------------------------- */
+
+/*
+    Calculation for NDIV_i to obtain VCO frequency
+    -----------------------------------------------
+
+	Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
+	for Freq_vco = VCO_FREQ_MHz
+		Freq_ref = chipcHw_XTAL_FREQ_Hz
+		PLL_P1 = PLL_P2 = 1
+		and
+		PLL_NDIV_f = 0
+
+	We get:
+		PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz
+
+    Calculation for PLL MDIV to obtain frequency Freq_x for channel x
+    -----------------------------------------------------------------
+		Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x
+
+		PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
+*/
+
+/* ---- Private Variables ------------------------------------------------- */
+/****************************************************************************/
+/**
+*  @brief  Initializes the PLL2
+*
+*  This function initializes the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz)
+{
+	uint32_t pllPreDivider2 = 0;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		pChipcHw->PLLConfig2 =
+		    chipcHw_REG_PLL_CONFIG_D_RESET |
+		    chipcHw_REG_PLL_CONFIG_A_RESET;
+
+		pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+		    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+		    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+		    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+		     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+		    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+		     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+
+		/* Enable CHIPC registers to control the PLL */
+		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+		/* Set pre divider to get desired VCO frequency */
+		pChipcHw->PLLPreDivider2 = pllPreDivider2;
+		/* Set NDIV Frac */
+		pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
+
+		/* This has to be removed once the default values are fixed for PLL2. */
+		pChipcHw->PLLControl12 = 0x38000700;
+		pChipcHw->PLLControl22 = 0x00000015;
+
+		/* Reset PLL2 */
+		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		} else {
+			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		}
+		REG_LOCAL_IRQ_RESTORE;
+	}
+
+	/* Insert certain amount of delay before deasserting ARESET. */
+	udelay(1);
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		/* Remove analog reset and Power on the PLL */
+		pChipcHw->PLLConfig2 &=
+		    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+		      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+
+		REG_LOCAL_IRQ_RESTORE;
+
+	}
+
+	/* Wait until PLL is locked */
+	while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+		;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		/* Remove digital reset */
+		pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+EXPORT_SYMBOL(chipcHw_pll2Enable);
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the PLL1
+*
+*  This function initializes the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
+{
+	uint32_t pllPreDivider = 0;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->PLLConfig =
+		    chipcHw_REG_PLL_CONFIG_D_RESET |
+		    chipcHw_REG_PLL_CONFIG_A_RESET;
+		/* Setting VCO frequency */
+		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+			pllPreDivider =
+			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
+			    ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
+			      1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+		} else {
+			pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+			    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+			     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+		}
+
+		/* Enable CHIPC registers to control the PLL */
+		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+		/* Set pre divider to get desired VCO frequency */
+		pChipcHw->PLLPreDivider = pllPreDivider;
+		/* Set NDIV Frac */
+		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+			    chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
+		} else {
+			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+			    chipcHw_REG_PLL_DIVIDER_NDIV_f;
+		}
+
+		/* Reset PLL1 */
+		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		} else {
+			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		}
+
+		REG_LOCAL_IRQ_RESTORE;
+
+		/* Insert certain amount of delay before deasserting ARESET. */
+		udelay(1);
+
+		{
+			REG_LOCAL_IRQ_SAVE;
+			/* Remove analog reset and Power on the PLL */
+			pChipcHw->PLLConfig &=
+			    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+			      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+
+		/* Wait until PLL is locked */
+		while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
+		       || !(pChipcHw->
+			    PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+			;
+
+		/* Remove digital reset */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+			REG_LOCAL_IRQ_RESTORE;
+		}
+	}
+}
+
+EXPORT_SYMBOL(chipcHw_pll1Enable);
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the chipc module
+*
+*  This function initializes the PLLs and core system clocks
+*
+*/
+/****************************************************************************/
+
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
+    ) {
+#if !(defined(__KERNEL__) && !defined(STANDALONE))
+	delay_init();
+#endif
+
+	/* Do not program PLL, when warm reset */
+	if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
+		chipcHw_pll1Enable(initParam->pllVcoFreqHz,
+				   initParam->ssSupport);
+		chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
+	} else {
+		/* Clear sticky bits */
+		chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
+	}
+	/* Clear sticky bits */
+	chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
+
+	/* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
+	pChipcHw->ACLKClock =
+	    (pChipcHw->
+	     ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
+								 armBusRatio &
+								 chipcHw_REG_ACLKClock_CLK_DIV_MASK);
+
+	/* Set various core component frequencies. The order in which this is done is important for some. */
+	/* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
+	/* frequency to find its ratio with the BUS.  Hence we must set the ARM first, followed by the BUS,  */
+	/* then VPM and RTBUS. */
+
+	chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
+				  initParam->busClockFreqHz *
+				  initParam->armBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
+				  initParam->busClockFreqHz *
+				  initParam->vpmBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
+				  initParam->busClockFreqHz *
+				  initParam->ddrBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
+				  initParam->busClockFreqHz / 2);
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
new file mode 100644
index 00000000000..2671d8896bb
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
@@ -0,0 +1,124 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <csp/intcHw.h>
+#include <csp/cache.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+/* ---- Private Variables ------------------------------------------------- */
+void chipcHw_reset_run_from_aram(void);
+
+typedef void (*RUNFUNC) (void);
+
+/****************************************************************************/
+/**
+*  @brief   warmReset
+*
+*  @note warmReset configures the clocks which are not reset back to the state
+*   required to execute on reset.  To do so we need to copy the code into internal
+*   memory to change the ARM clock while we are not executing from DDR.
+*/
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask)
+{
+	int i = 0;
+	RUNFUNC runFunc = (RUNFUNC) (unsigned long)MM_ADDR_IO_ARAM;
+
+	/* Disable all interrupts */
+	intcHw_irq_disable(INTCHW_INTC0, 0xffffffff);
+	intcHw_irq_disable(INTCHW_INTC1, 0xffffffff);
+	intcHw_irq_disable(INTCHW_SINTC, 0xffffffff);
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		if (mask & chipcHw_REG_SOFT_RESET_CHIP_SOFT) {
+			chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+		}
+		/* Bypass the PLL clocks before reboot */
+		pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+		pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+
+		/* Copy the chipcHw_warmReset_run_from_aram function into ARAM */
+		do {
+			((uint32_t *) MM_IO_BASE_ARAM)[i] =
+			    ((uint32_t *) &chipcHw_reset_run_from_aram)[i];
+			i++;
+		} while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f);	/* 0xe1a0f00f == asm ("mov r15, r15"); */
+
+		CSP_CACHE_FLUSH_ALL;
+
+		/* run the function from ARAM */
+		runFunc();
+
+		/* Code will never get here, but include it to balance REG_LOCAL_IRQ_SAVE above */
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/* This function must run from internal memory */
+void chipcHw_reset_run_from_aram(void)
+{
+/* Make sure, pipeline is filled with instructions coming from ARAM */
+__asm (" nop                                                            \n\t"
+		" nop                                                            \n\t"
+#if defined(__KERNEL__) && !defined(STANDALONE)
+		" MRC      p15,#0x0,r0,c1,c0,#0                                  \n\t"
+		" BIC      r0,r0,#0xd                                            \n\t"
+		" MCR      p15,#0x0,r0,c1,c0,#0                                  \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+#endif
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+/* Bypass the ARM clock and switch to XTAL clock */
+		" MOV      r2,#0x80000000                                        \n\t"
+		" LDR      r3,[r2,#8]                                            \n\t"
+		" ORR      r3,r3,#0x20000                                        \n\t"
+		" STR      r3,[r2,#8]                                            \n\t"
+
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+/* Issue reset */
+		" MOV      r3,#0x2                                               \n\t"
+		" STR      r3,[r2,#0x80]                                         \n\t"
+/* End here */
+		" MOV      pc,pc                                                 \n\t");
+/* 0xe1a0f00f ==  asm ("mov r15, r15"); */
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
new file mode 100644
index 00000000000..54ad964fe94
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
@@ -0,0 +1,64 @@
+/*****************************************************************************
+* Copyright 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+/****************************************************************************/
+/**
+*  @file    chipcHw_str.c
+*
+*  @brief   Contains strings which are useful to linux and csp
+*
+*  @note
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+static const char *gMuxStr[] = {
+	"GPIO",			/* 0 */
+	"KeyPad",		/* 1 */
+	"I2C-Host",		/* 2 */
+	"SPI",			/* 3 */
+	"Uart",			/* 4 */
+	"LED-Mtx-P",		/* 5 */
+	"LED-Mtx-S",		/* 6 */
+	"SDIO-0",		/* 7 */
+	"SDIO-1",		/* 8 */
+	"PCM",			/* 9 */
+	"I2S",			/* 10 */
+	"ETM",			/* 11 */
+	"Debug",		/* 12 */
+	"Misc",			/* 13 */
+	"0xE",			/* 14 */
+	"0xF",			/* 15 */
+};
+
+/****************************************************************************/
+/**
+*  @brief   Retrieves a string representation of the mux setting for a pin.
+*
+*  @return  Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin)
+{
+	if ((pin < 0) || (pin >= chipcHw_GPIO_COUNT)) {
+		return "";
+	}
+
+	return gMuxStr[chipcHw_getGpioPinFunction(pin)];
+}
-- 
GitLab


From 1a4a561bdd838b4455d57edf0deaf83e894d795e Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:07:22 +0100
Subject: [PATCH 220/257] ARM: 5658/1: bcmring: add csp dmac header files

add csp dmac header files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/dmacHw.h    | 596 ++++++++++++++++++
 .../include/mach/csp/dmacHw_priv.h            | 145 +++++
 .../include/mach/csp/dmacHw_reg.h             | 406 ++++++++++++
 3 files changed, 1147 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/dmacHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h

diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
new file mode 100644
index 00000000000..5d510130a25
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -0,0 +1,596 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw.h
+*
+*  @brief   API definitions for low level DMA controller driver
+*
+*/
+/****************************************************************************/
+#ifndef _DMACHW_H
+#define _DMACHW_H
+
+#include <stddef.h>
+
+#include <csp/stdint.h>
+#include <mach/csp/dmacHw_reg.h>
+
+/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
+
+   System specific channel ID should be defined as follows
+
+   For example:
+
+   #include <dmacHw.h>
+   ...
+   #define systemHw_LCD_CHANNEL_ID                dmacHw_MAKE_CHANNEL_ID(0,5)
+   #define systemHw_SWITCH_RX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,0)
+   #define systemHw_SWITCH_TX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,1)
+   #define systemHw_APM_RX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,3)
+   #define systemHw_APM_TX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,4)
+   ...
+   #define systemHw_SHARED1_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,4)
+   #define systemHw_SHARED2_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,5)
+   #define systemHw_SHARED3_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(0,6)
+   ...
+*/
+#define dmacHw_MAKE_CHANNEL_ID(m, c)         (m << 8 | c)
+
+typedef enum {
+	dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0,	/* Channel priority 0. Lowest priority DMA channel */
+	dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1,	/* Channel priority 1 */
+	dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2,	/* Channel priority 2 */
+	dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3,	/* Channel priority 3 */
+	dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4,	/* Channel priority 4 */
+	dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5,	/* Channel priority 5 */
+	dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6,	/* Channel priority 6 */
+	dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7	/* Channel priority 7. Highest priority DMA channel */
+} dmacHw_CHANNEL_PRIORITY_e;
+
+/* Source destination master interface */
+typedef enum {
+	dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1,	/* Source DMA master interface 1 */
+	dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2,	/* Source DMA master interface 2 */
+	dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1,	/* Destination DMA master interface 1 */
+	dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2	/* Destination DMA master interface 2 */
+} dmacHw_MASTER_INTERFACE_e;
+
+typedef enum {
+	dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8,	/* Source 8 bit  (1 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16,	/* Source 16 bit (2 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32,	/* Source 32 bit (4 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64,	/* Source 64 bit (8 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8,	/* Destination 8 bit  (1 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16,	/* Destination 16 bit (2 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32,	/* Destination 32 bit (4 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64	/* Destination 64 bit (8 byte) per transaction */
+} dmacHw_TRANSACTION_WIDTH_e;
+
+typedef enum {
+	dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0,	/* Source No burst */
+	dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4,	/* Source 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8,	/* Source 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16,	/* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0,	/* Destination No burst */
+	dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4,	/* Destination 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8,	/* Destination 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16	/* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+} dmacHw_BURST_WIDTH_e;
+
+typedef enum {
+	dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC,	/* Memory to memory transfer */
+	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC,	/* Peripheral to memory transfer */
+	dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC,	/* Memory to peripheral transfer */
+	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC	/* Peripheral to peripheral transfer */
+} dmacHw_TRANSFER_TYPE_e;
+
+typedef enum {
+	dmacHw_TRANSFER_MODE_PERREQUEST,	/* Block transfer per DMA request */
+	dmacHw_TRANSFER_MODE_CONTINUOUS,	/* Continuous transfer of streaming data */
+	dmacHw_TRANSFER_MODE_PERIODIC	/* Periodic transfer of streaming data */
+} dmacHw_TRANSFER_MODE_e;
+
+typedef enum {
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC,	/* Increment source address after every transaction */
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC,	/* Decrement source address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC,	/* Increment destination address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC,	/* Decrement destination address after every transaction */
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC,	/* No change in source address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC	/* No change in destination address after every transaction */
+} dmacHw_ADDRESS_UPDATE_MODE_e;
+
+typedef enum {
+	dmacHw_FLOW_CONTROL_DMA,	/* DMA working as flow controller (default) */
+	dmacHw_FLOW_CONTROL_PERIPHERAL	/* Peripheral working as flow controller */
+} dmacHw_FLOW_CONTROL_e;
+
+typedef enum {
+	dmacHw_TRANSFER_STATUS_BUSY,	/* DMA Transfer ongoing */
+	dmacHw_TRANSFER_STATUS_DONE,	/* DMA Transfer completed */
+	dmacHw_TRANSFER_STATUS_ERROR	/* DMA Transfer error */
+} dmacHw_TRANSFER_STATUS_e;
+
+typedef enum {
+	dmacHw_INTERRUPT_DISABLE,	/* Interrupt disable  */
+	dmacHw_INTERRUPT_ENABLE	/* Interrupt enable */
+} dmacHw_INTERRUPT_e;
+
+typedef enum {
+	dmacHw_INTERRUPT_STATUS_NONE = 0x0,	/* No DMA interrupt */
+	dmacHw_INTERRUPT_STATUS_TRANS = 0x1,	/* End of DMA transfer interrupt */
+	dmacHw_INTERRUPT_STATUS_BLOCK = 0x2,	/* End of block transfer interrupt */
+	dmacHw_INTERRUPT_STATUS_ERROR = 0x4	/* Error interrupt */
+} dmacHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM,	/* Number of DMA channel */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE,	/* Maximum channel burst size */
+	dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM,	/* Number of DMA master interface */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH,	/* Channel Data bus width */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE	/* Channel FIFO size */
+} dmacHw_CONTROLLER_ATTRIB_e;
+
+typedef unsigned long dmacHw_HANDLE_t;	/* DMA channel handle */
+typedef uint32_t dmacHw_ID_t;	/* DMA channel Id.  Must be created using
+				   "dmacHw_MAKE_CHANNEL_ID" macro
+				 */
+/* DMA channel configuration parameters */
+typedef struct {
+	uint32_t srcPeripheralPort;	/* Source peripheral port */
+	uint32_t dstPeripheralPort;	/* Destination peripheral port */
+	uint32_t srcStatusRegisterAddress;	/* Source status register address */
+	uint32_t dstStatusRegisterAddress;	/* Destination status register address of type  */
+
+	uint32_t srcGatherWidth;	/* Number of bytes gathered before successive gather opearation */
+	uint32_t srcGatherJump;	/* Number of bytes jumpped before successive gather opearation */
+	uint32_t dstScatterWidth;	/* Number of bytes sacattered before successive scatter opearation */
+	uint32_t dstScatterJump;	/* Number of bytes jumpped  before successive scatter opearation */
+	uint32_t maxDataPerBlock;	/* Maximum number of bytes to be transferred per block/descrptor.
+					   0 = Maximum possible.
+					 */
+
+	dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate;	/* Source address update mode */
+	dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate;	/* Destination address update mode */
+	dmacHw_TRANSFER_TYPE_e transferType;	/* DMA transfer type  */
+	dmacHw_TRANSFER_MODE_e transferMode;	/* DMA transfer mode */
+	dmacHw_MASTER_INTERFACE_e srcMasterInterface;	/* DMA source interface  */
+	dmacHw_MASTER_INTERFACE_e dstMasterInterface;	/* DMA destination interface */
+	dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth;	/* Source transaction width   */
+	dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth;	/* Destination transaction width */
+	dmacHw_BURST_WIDTH_e srcMaxBurstWidth;	/* Source burst width */
+	dmacHw_BURST_WIDTH_e dstMaxBurstWidth;	/* Destination burst width */
+	dmacHw_INTERRUPT_e blockTransferInterrupt;	/* Block trsnafer interrupt */
+	dmacHw_INTERRUPT_e completeTransferInterrupt;	/* Complete DMA trsnafer interrupt */
+	dmacHw_INTERRUPT_e errorInterrupt;	/* Error interrupt */
+	dmacHw_CHANNEL_PRIORITY_e channelPriority;	/* Channel priority */
+	dmacHw_FLOW_CONTROL_e flowControler;	/* Data flow controller */
+} dmacHw_CONFIG_t;
+
+/****************************************************************************/
+/**
+*  @brief   Initializes DMA
+*
+*  This function initializes DMA CSP driver
+*
+*  @note
+*     Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void);
+
+/****************************************************************************/
+/**
+*  @brief   Exit function for  DMA
+*
+*  This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void);
+
+/****************************************************************************/
+/**
+*  @brief   Gets a handle to a DMA channel
+*
+*  This function returns a handle, representing a control block of a particular DMA channel
+*
+*  @return  -1       - On Failure
+*            handle  - On Success, representing a channel control block
+*
+*  @note
+*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Initializes a DMA channel for use
+*
+*  This function initializes and resets a DMA channel for use
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+				    size_t dataLen	/*   [ IN ] Data length in bytes */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Initializes descriptor ring
+*
+*  This function will initializes the descriptor ring of a DMA channel
+*
+*
+*  @return   -1 - On failure
+*             0 - On success
+*  @note
+*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
+*     - Descriptor buffer MUST be 32 bit aligned and uncached as it
+*       is accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+			  uint32_t len,	/*  [ IN ] Size of the pBuf */
+			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Finds amount of memory required to form a descriptor ring
+*
+*
+*  @return   Number of bytes required to form a descriptor ring
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt	/*  [ IN ] Number of descriptor in the ring */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Configure DMA channel
+*
+*  @return  0  : On success
+*           -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptors for known data length
+*
+*  When DMA has to work as a flow controller, this function prepares the
+*  descriptor chain to transfer data
+*
+*  from:
+*          - Memory to memory
+*          - Peripheral to memory
+*          - Memory to Peripheral
+*          - Peripheral to Peripheral
+*
+*  @return   -1 - On failure
+*             0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+			     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			     void *pSrcAddr,	/*  [ IN ] Source (Peripheral/Memory) address */
+			     void *pDstAddr,	/*  [ IN ] Destination (Peripheral/Memory) address */
+			     size_t dataLen	/*  [ IN ] Length in bytes   */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Indicates whether DMA transfer is in progress or completed
+*
+*  @return   DMA transfer status
+*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
+*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
+*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptor carrying control information
+*
+*  This function will be used to send specific control information to the device
+*  using the DMA channel
+*
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+				void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+				uint32_t ctlAddress,	/*  [ IN ] Address of the device control register  */
+				uint32_t control	/*  [ IN ] Device control information */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Read data DMA transferred to memory
+*
+*  This function will read data that has been DMAed to memory while transfering from:
+*          - Memory to memory
+*          - Peripheral to memory
+*
+*  @return  0 - No more data is available to read
+*           1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle    */
+			       dmacHw_CONFIG_t *pConfig,	/*  [ IN ]  Configuration settings */
+			       void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			       void **ppBbuf,	/*  [ OUT ] Data received */
+			       size_t *pLlen	/*  [ OUT ] Length of the data received */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
+*
+*  This function will form the descriptor ring by allocating buffers, when source peripheral
+*  has to work as a flow controller to transfer data from:
+*           - Peripheral to memory.
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle   */
+				     dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+				     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+				     uint32_t srcAddr,	/*  [ IN ] Source peripheral address */
+				     void *(*fpAlloc) (int len),	/*  [ IN ] Function pointer  that provides destination memory */
+				     int len,	/*  [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+				     int num	/*  [ IN ] Number of descriptor to set */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to initiate transfer
+*
+*  @return  void
+*
+*
+*  @note
+*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
+*     - This function should also be called from ISR to program the channel with
+*       pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Resets descriptor control information
+*
+*  @return  void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to stop transfer
+*
+*  Ensures the channel is not doing any transfer after calling this function
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Check the existance of pending descriptor
+*
+*  This function confirmes if there is any pending descriptor in the chain
+*  to program the channel
+*
+*  @return  1 : Channel need to be programmed with pending descriptor
+*           0 : No more pending descriptor to programe the channel
+*
+*  @note
+*     - This function should be called from ISR in case there are pending
+*       descriptor to program the channel.
+*
+*     Example:
+*
+*     dmac_isr ()
+*     {
+*         ...
+*         if (dmacHw_descriptorPending (handle))
+*         {
+*            dmacHw_initiateTransfer (handle);
+*         }
+*     }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Deallocates source or destination memory, allocated
+*
+*  This function can be called to deallocate data memory that was DMAed successfully
+*
+*  @return  -1  - On failure
+*            0  - On success
+*
+*  @note
+*     This function will be called ONLY, when source OR destination address is pointing
+*     to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+		   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+		   void (*fpFree) (void *)	/*  [ IN ] Function pointer to free data memory */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the DMA channel specific interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Returns the cause of channel specific DMA interrupt
+*
+*  This function returns the cause of interrupt
+*
+*  @return  Interrupt status, each bit representing a specific type of interrupt
+*           of type dmacHw_INTERRUPT_STATUS_e
+*  @note
+*           This function should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a DMA channel causing interrupt
+*
+*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+*  @return  NULL   : No channel causing DMA interrupt
+*           ! NULL : Handle to a channel causing DMA interrupt
+*  @note
+*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+*  @brief   Sets channel specific user data
+*
+*  This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			       void *userData	/*  [ IN ] User data  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Gets channel specific user data
+*
+*  This function returns user data specific to a DMA channel
+*
+*  @return   user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Displays channel specific registers and other control parameters
+*
+*
+*  @return  void
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Provides DMA controller attributes
+*
+*
+*  @return  DMA controller attributes
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle  */
+					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+    );
+
+#endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
new file mode 100644
index 00000000000..375066ad018
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -0,0 +1,145 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_priv.h
+*
+*  @brief   Private Definitions for low level DMA driver
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_PRIV_H
+#define _DMACHW_PRIV_H
+
+#include <csp/stdint.h>
+
+/* Data type for DMA Link List Item */
+typedef struct {
+	uint32_t sar;		/* Source Adress Register.
+				   Address must be aligned to CTLx.SRC_TR_WIDTH.             */
+	uint32_t dar;		/* Destination Address Register.
+				   Address must be aligned to CTLx.DST_TR_WIDTH.             */
+	uint32_t llpPhy;	/* LLP contains the physical address of the next descriptor for block chaining using linked lists.
+				   Address MUST be aligned to a 32-bit boundary.             */
+	dmacHw_REG64_t ctl;	/* Control Register. 64 bits */
+	uint32_t sstat;		/* Source Status Register */
+	uint32_t dstat;		/* Destination Status Register */
+	uint32_t devCtl;	/* Device specific control information */
+	uint32_t llp;		/* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */
+} dmacHw_DESC_t;
+
+/*
+ *  Descriptor ring pointers
+ */
+typedef struct {
+	int num;		/* Number of link items */
+	dmacHw_DESC_t *pHead;	/* Head of descriptor ring (for writing) */
+	dmacHw_DESC_t *pTail;	/* Tail of descriptor ring (for reading) */
+	dmacHw_DESC_t *pProg;	/* Descriptor to program the channel (for programming the channel register) */
+	dmacHw_DESC_t *pEnd;	/* End of current descriptor chain */
+	dmacHw_DESC_t *pFree;	/* Descriptor to free memory (freeing dynamic memory) */
+	uint32_t virt2PhyOffset;	/* Virtual to physical address offset for the descriptor ring */
+} dmacHw_DESC_RING_t;
+
+/*
+ *  DMA channel control block
+ */
+typedef struct {
+	uint32_t module;	/* DMA controller module (0-1) */
+	uint32_t channel;	/* DMA channel (0-7) */
+	volatile uint32_t varDataStarted;	/* Flag indicating variable data channel is enabled */
+	volatile uint32_t descUpdated;	/* Flag to indicate descriptor update is complete */
+	void *userData;		/* Channel specifc user data */
+} dmacHw_CBLK_t;
+
+#define dmacHw_ASSERT(a)                  if (!(a)) while (1)
+#define dmacHw_MAX_CHANNEL_COUNT          16
+#define dmacHw_FREE_USER_MEMORY           0xFFFFFFFF
+#define dmacHw_DESC_FREE                  dmacHw_REG_CTL_DONE
+#define dmacHw_DESC_INIT                  ((dmacHw_DESC_t *) 0xFFFFFFFF)
+#define dmacHw_MAX_BLOCKSIZE              4064
+#define dmacHw_GET_DESC_RING(addr)        (dmacHw_DESC_RING_t *)(addr)
+#define dmacHw_ADDRESS_MASK(byte)         ((byte) - 1)
+#define dmacHw_NEXT_DESC(rp, dp)           ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp)
+#define dmacHw_HANDLE_TO_CBLK(handle)     ((dmacHw_CBLK_t *) (handle))
+#define dmacHw_CBLK_TO_HANDLE(cblkp)      ((dmacHw_HANDLE_t) (cblkp))
+#define dmacHw_DST_IS_MEMORY(tt)          (((tt) ==  dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0
+
+/****************************************************************************/
+/**
+*  @brief   Get next available transaction width
+*
+*
+*  @return  On sucess  : Next avail able transaction width
+*           On failure : dmacHw_TRANSACTION_WIDTH_8
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ] Current transaction width */
+    ) {
+	if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+		return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) -
+			 1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT;
+	} else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) {
+		return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) -
+			 1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT;
+	}
+
+	/* Default return  */
+	return dmacHw_SRC_TRANSACTION_WIDTH_8;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get number of bytes per transaction
+*
+*  @return  Number of bytes per transaction
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ]  Transaction width */
+    ) {
+	int width = 1;
+	switch (tw) {
+	case dmacHw_SRC_TRANSACTION_WIDTH_8:
+		width = 1;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_16:
+	case dmacHw_DST_TRANSACTION_WIDTH_16:
+		width = 2;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_32:
+	case dmacHw_DST_TRANSACTION_WIDTH_32:
+		width = 4;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_64:
+	case dmacHw_DST_TRANSACTION_WIDTH_64:
+		width = 8;
+		break;
+	default:
+		dmacHw_ASSERT(0);
+	}
+
+	/* Default transaction width */
+	return width;
+}
+
+#endif /* _DMACHW_PRIV_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
new file mode 100644
index 00000000000..891cea87e33
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -0,0 +1,406 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_reg.h
+*
+*  @brief   Definitions for low level DMA registers
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_REG_H
+#define _DMACHW_REG_H
+
+#include <csp/stdint.h>
+#include <mach/csp/mm_io.h>
+
+/* Data type for 64 bit little endian register */
+typedef struct {
+	volatile uint32_t lo;	/* Lower 32 bit in little endian mode */
+	volatile uint32_t hi;	/* Upper 32 bit in little endian mode */
+} dmacHw_REG64_t;
+
+/* Data type representing DMA channel registers */
+typedef struct {
+	dmacHw_REG64_t ChannelSar;	/*  Source Adress Register. 64 bits (upper 32 bits are reserved)
+					   Address must be aligned to CTLx.SRC_TR_WIDTH.
+					 */
+	dmacHw_REG64_t ChannelDar;	/*  Destination Address Register.64 bits (upper 32 bits are reserved)
+					   Address must be aligned to CTLx.DST_TR_WIDTH.
+					 */
+	dmacHw_REG64_t ChannelLlp;	/*  Link List Pointer.64 bits (upper 32 bits are reserved)
+					   LLP contains the pointer to the next LLI for block chaining using linked lists.
+					   If LLPis set to 0x0, then transfers using linked lists are not enabled.
+					   Address MUST be aligned to a 32-bit boundary.
+					 */
+	dmacHw_REG64_t ChannelCtl;	/* Control Register. 64 bits */
+	dmacHw_REG64_t ChannelSstat;	/* Source Status Register */
+	dmacHw_REG64_t ChannelDstat;	/* Destination Status Register */
+	dmacHw_REG64_t ChannelSstatAddr;	/* Source Status Address Register */
+	dmacHw_REG64_t ChannelDstatAddr;	/* Destination Status Address Register */
+	dmacHw_REG64_t ChannelConfig;	/* Channel Configuration Register */
+	dmacHw_REG64_t SrcGather;	/* Source gather register */
+	dmacHw_REG64_t DstScatter;	/* Destination scatter register */
+} dmacHw_CH_REG_t;
+
+/* Data type for RAW interrupt status registers */
+typedef struct {
+	dmacHw_REG64_t RawTfr;	/* Raw Status for IntTfr Interrupt */
+	dmacHw_REG64_t RawBlock;	/* Raw Status for IntBlock Interrupt */
+	dmacHw_REG64_t RawSrcTran;	/* Raw Status for IntSrcTran Interrupt */
+	dmacHw_REG64_t RawDstTran;	/* Raw Status for IntDstTran Interrupt */
+	dmacHw_REG64_t RawErr;	/* Raw Status for IntErr Interrupt */
+} dmacHw_INT_RAW_t;
+
+/* Data type for interrupt status registers */
+typedef struct {
+	dmacHw_REG64_t StatusTfr;	/* Status for IntTfr Interrupt */
+	dmacHw_REG64_t StatusBlock;	/* Status for IntBlock Interrupt */
+	dmacHw_REG64_t StatusSrcTran;	/* Status for IntSrcTran Interrupt */
+	dmacHw_REG64_t StatusDstTran;	/* Status for IntDstTran Interrupt */
+	dmacHw_REG64_t StatusErr;	/* Status for IntErr Interrupt */
+} dmacHw_INT_STATUS_t;
+
+/* Data type for interrupt mask registers*/
+typedef struct {
+	dmacHw_REG64_t MaskTfr;	/* Mask for IntTfr Interrupt */
+	dmacHw_REG64_t MaskBlock;	/* Mask for IntBlock Interrupt */
+	dmacHw_REG64_t MaskSrcTran;	/* Mask for IntSrcTran Interrupt */
+	dmacHw_REG64_t MaskDstTran;	/* Mask for IntDstTran Interrupt */
+	dmacHw_REG64_t MaskErr;	/* Mask for IntErr Interrupt */
+} dmacHw_INT_MASK_t;
+
+/* Data type for interrupt clear registers */
+typedef struct {
+	dmacHw_REG64_t ClearTfr;	/* Clear for IntTfr Interrupt */
+	dmacHw_REG64_t ClearBlock;	/* Clear for IntBlock Interrupt */
+	dmacHw_REG64_t ClearSrcTran;	/* Clear for IntSrcTran Interrupt */
+	dmacHw_REG64_t ClearDstTran;	/* Clear for IntDstTran Interrupt */
+	dmacHw_REG64_t ClearErr;	/* Clear for IntErr Interrupt */
+	dmacHw_REG64_t StatusInt;	/* Status for each interrupt type */
+} dmacHw_INT_CLEAR_t;
+
+/* Data type for software handshaking registers */
+typedef struct {
+	dmacHw_REG64_t ReqSrcReg;	/* Source Software Transaction Request Register */
+	dmacHw_REG64_t ReqDstReg;	/* Destination Software Transaction Request Register */
+	dmacHw_REG64_t SglReqSrcReg;	/* Single Source Transaction Request Register */
+	dmacHw_REG64_t SglReqDstReg;	/* Single Destination Transaction Request Register */
+	dmacHw_REG64_t LstSrcReg;	/* Last Source Transaction Request Register */
+	dmacHw_REG64_t LstDstReg;	/* Last Destination Transaction Request Register */
+} dmacHw_SW_HANDSHAKE_t;
+
+/* Data type for misc. registers */
+typedef struct {
+	dmacHw_REG64_t DmaCfgReg;	/* DMA Configuration Register */
+	dmacHw_REG64_t ChEnReg;	/* DMA Channel Enable Register */
+	dmacHw_REG64_t DmaIdReg;	/* DMA ID Register */
+	dmacHw_REG64_t DmaTestReg;	/* DMA Test Register */
+	dmacHw_REG64_t Reserved0;	/* Reserved */
+	dmacHw_REG64_t Reserved1;	/* Reserved */
+	dmacHw_REG64_t CompParm6;	/* Component Parameter 6 */
+	dmacHw_REG64_t CompParm5;	/* Component Parameter 5 */
+	dmacHw_REG64_t CompParm4;	/* Component Parameter 4 */
+	dmacHw_REG64_t CompParm3;	/* Component Parameter 3 */
+	dmacHw_REG64_t CompParm2;	/* Component Parameter 2 */
+	dmacHw_REG64_t CompParm1;	/* Component Parameter 1 */
+	dmacHw_REG64_t CompId;	/* Compoent ID */
+} dmacHw_MISC_t;
+
+/* Base registers */
+#define dmacHw_0_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA0	/* DMAC 0 module's base address */
+#define dmacHw_1_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA1	/* DMAC 1 module's base address */
+
+extern uint32_t dmaChannelCount_0;
+extern uint32_t dmaChannelCount_1;
+
+/* Define channel specific registers */
+#define dmacHw_CHAN_BASE(module, chan)          ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
+
+/* Raw interrupt status registers */
+#define dmacHw_REG_INT_RAW_BASE(module)         ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
+#define dmacHw_REG_INT_RAW_TRAN(module)         (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
+#define dmacHw_REG_INT_RAW_BLOCK(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
+#define dmacHw_REG_INT_RAW_STRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
+#define dmacHw_REG_INT_RAW_DTRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
+#define dmacHw_REG_INT_RAW_ERROR(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_STAT_BASE(module)        ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
+#define dmacHw_REG_INT_STAT_TRAN(module)        (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
+#define dmacHw_REG_INT_STAT_BLOCK(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
+#define dmacHw_REG_INT_STAT_STRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
+#define dmacHw_REG_INT_STAT_DTRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
+#define dmacHw_REG_INT_STAT_ERROR(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_MASK_BASE(module)        ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
+#define dmacHw_REG_INT_MASK_TRAN(module)        (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
+#define dmacHw_REG_INT_MASK_BLOCK(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
+#define dmacHw_REG_INT_MASK_STRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
+#define dmacHw_REG_INT_MASK_DTRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
+#define dmacHw_REG_INT_MASK_ERROR(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
+
+/* Interrupt clear registers */
+#define dmacHw_REG_INT_CLEAR_BASE(module)       ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
+#define dmacHw_REG_INT_CLEAR_TRAN(module)       (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
+#define dmacHw_REG_INT_CLEAR_BLOCK(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
+#define dmacHw_REG_INT_CLEAR_STRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
+#define dmacHw_REG_INT_CLEAR_DTRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
+#define dmacHw_REG_INT_CLEAR_ERROR(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
+#define dmacHw_REG_INT_STATUS(module)           (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
+
+/* Software handshaking registers */
+#define dmacHw_REG_SW_HS_BASE(module)           ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
+#define dmacHw_REG_SW_HS_SRC_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
+
+/* Miscellaneous registers */
+#define dmacHw_REG_MISC_BASE(module)            ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
+#define dmacHw_REG_MISC_CFG(module)             (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
+#define dmacHw_REG_MISC_CH_ENABLE(module)       (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
+#define dmacHw_REG_MISC_ID(module)              (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
+#define dmacHw_REG_MISC_TEST(module)            (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
+#define dmacHw_REG_MISC_COMP_PARAM2_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
+#define dmacHw_REG_MISC_COMP_PARAM2_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
+#define dmacHw_REG_MISC_COMP_PARAM3_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
+#define dmacHw_REG_MISC_COMP_PARAM3_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
+#define dmacHw_REG_MISC_COMP_PARAM4_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
+#define dmacHw_REG_MISC_COMP_PARAM4_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
+#define dmacHw_REG_MISC_COMP_PARAM5_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
+#define dmacHw_REG_MISC_COMP_PARAM5_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
+#define dmacHw_REG_MISC_COMP_PARAM6_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
+#define dmacHw_REG_MISC_COMP_PARAM6_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
+
+/* Channel control registers */
+#define dmacHw_REG_SAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
+#define dmacHw_REG_DAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo)
+#define dmacHw_REG_LLP(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo)
+
+#define dmacHw_REG_CTL_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo)
+#define dmacHw_REG_CTL_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi)
+
+#define dmacHw_REG_SSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo)
+#define dmacHw_REG_DSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo)
+#define dmacHw_REG_SSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo)
+#define dmacHw_REG_DSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo)
+
+#define dmacHw_REG_CFG_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo)
+#define dmacHw_REG_CFG_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi)
+
+#define dmacHw_REG_SGR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo)
+#define dmacHw_REG_SGR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi)
+
+#define dmacHw_REG_DSR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo)
+#define dmacHw_REG_DSR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi)
+
+#define INT_STATUS_MASK(channel)                (0x00000001 << (channel))
+#define CHANNEL_BUSY(mod, channel)              (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel)))
+
+/* Bit mask for REG_DMACx_CTL_LO */
+
+#define dmacHw_REG_CTL_INT_EN                       0x00000001	/* Channel interrupt enable */
+
+#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK            0x0000000E	/* Destination transaction width mask */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT           1
+#define dmacHw_REG_CTL_DST_TR_WIDTH_8               0x00000000	/* Destination transaction width 8 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_16              0x00000002	/* Destination transaction width 16 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_32              0x00000004	/* Destination transaction width 32 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_64              0x00000006	/* Destination transaction width 64 bit */
+
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK            0x00000070	/* Source transaction width mask */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT           4
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_8               0x00000000	/* Source transaction width 8 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_16              0x00000010	/* Source transaction width 16 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_32              0x00000020	/* Source transaction width 32 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_64              0x00000030	/* Source transaction width 64 bit */
+
+#define dmacHw_REG_CTL_DS_ENABLE                    0x00040000	/* Destination scatter enable */
+#define dmacHw_REG_CTL_SG_ENABLE                    0x00020000	/* Source gather enable */
+
+#define dmacHw_REG_CTL_DINC_MASK                    0x00000180	/* Destination address inc/dec mask */
+#define dmacHw_REG_CTL_DINC_INC                     0x00000000	/* Destination address increment */
+#define dmacHw_REG_CTL_DINC_DEC                     0x00000080	/* Destination address decrement */
+#define dmacHw_REG_CTL_DINC_NC                      0x00000100	/* Destination address no change */
+
+#define dmacHw_REG_CTL_SINC_MASK                    0x00000600	/* Source address inc/dec mask */
+#define dmacHw_REG_CTL_SINC_INC                     0x00000000	/* Source address increment */
+#define dmacHw_REG_CTL_SINC_DEC                     0x00000200	/* Source address decrement */
+#define dmacHw_REG_CTL_SINC_NC                      0x00000400	/* Source address no change */
+
+#define dmacHw_REG_CTL_DST_MSIZE_MASK               0x00003800	/* Destination burst transaction length */
+#define dmacHw_REG_CTL_DST_MSIZE_0                  0x00000000	/* No Destination burst */
+#define dmacHw_REG_CTL_DST_MSIZE_4                  0x00000800	/* Destination burst transaction length 4 */
+#define dmacHw_REG_CTL_DST_MSIZE_8                  0x00001000	/* Destination burst transaction length 8 */
+#define dmacHw_REG_CTL_DST_MSIZE_16                 0x00001800	/* Destination burst transaction length 16 */
+
+#define dmacHw_REG_CTL_SRC_MSIZE_MASK               0x0001C000	/* Source burst transaction length */
+#define dmacHw_REG_CTL_SRC_MSIZE_0                  0x00000000	/* No Source burst */
+#define dmacHw_REG_CTL_SRC_MSIZE_4                  0x00004000	/* Source burst transaction length 4 */
+#define dmacHw_REG_CTL_SRC_MSIZE_8                  0x00008000	/* Source burst transaction length 8 */
+#define dmacHw_REG_CTL_SRC_MSIZE_16                 0x0000C000	/* Source burst transaction length 16 */
+
+#define dmacHw_REG_CTL_TTFC_MASK                    0x00700000	/* Transfer type and flow controller */
+#define dmacHw_REG_CTL_TTFC_MM_DMAC                 0x00000000	/* Memory to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_DMAC                 0x00100000	/* Memory to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_DMAC                 0x00200000	/* Peripheral to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DMAC                 0x00300000	/* Peripheral to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_PERI                 0x00400000	/* Peripheral to Memory with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_SPERI                0x00500000	/* Peripheral to Peripheral with Source Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_PERI                 0x00600000	/* Memory to Peripheral with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DPERI                0x00700000	/* Peripheral to Peripheral with Destination Peripheral as flow controller */
+
+#define dmacHw_REG_CTL_DMS_MASK                     0x01800000	/* Destination AHB master interface */
+#define dmacHw_REG_CTL_DMS_1                        0x00000000	/* Destination AHB master interface 1 */
+#define dmacHw_REG_CTL_DMS_2                        0x00800000	/* Destination AHB master interface 2 */
+
+#define dmacHw_REG_CTL_SMS_MASK                     0x06000000	/* Source AHB master interface */
+#define dmacHw_REG_CTL_SMS_1                        0x00000000	/* Source AHB master interface 1 */
+#define dmacHw_REG_CTL_SMS_2                        0x02000000	/* Source AHB master interface 2 */
+
+#define dmacHw_REG_CTL_LLP_DST_EN                   0x08000000	/* Block chaining enable for destination side */
+#define dmacHw_REG_CTL_LLP_SRC_EN                   0x10000000	/* Block chaining enable for source side */
+
+/* Bit mask for REG_DMACx_CTL_HI */
+#define dmacHw_REG_CTL_BLOCK_TS_MASK                0x00000FFF	/* Block transfer size */
+#define dmacHw_REG_CTL_DONE                         0x00001000	/* Block trasnfer done */
+
+/* Bit mask for REG_DMACx_CFG_LO */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT                  5	/* Channel priority shift */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK          0x000000E0	/* Channel priority mask */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_0             0x00000000	/* Channel priority 0 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_1             0x00000020	/* Channel priority 1 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_2             0x00000040	/* Channel priority 2 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_3             0x00000060	/* Channel priority 3 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_4             0x00000080	/* Channel priority 4 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_5             0x000000A0	/* Channel priority 5 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_6             0x000000C0	/* Channel priority 6 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_7             0x000000E0	/* Channel priority 7 */
+
+#define dmacHw_REG_CFG_LO_CH_SUSPEND                0x00000100	/* Channel suspend */
+#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY             0x00000200	/* Channel FIFO empty */
+#define dmacHw_REG_CFG_LO_DST_CH_SW_HS              0x00000400	/* Destination channel SW handshaking */
+#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS              0x00000800	/* Source channel SW handshaking */
+
+#define dmacHw_REG_CFG_LO_CH_LOCK_MASK              0x00003000	/* Channel locking mask */
+#define dmacHw_REG_CFG_LO_CH_LOCK_DMA               0x00000000	/* Channel lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK             0x00001000	/* Channel lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS             0x00002000	/* Channel lock over the transaction */
+#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE            0x00010000	/* Channel lock enable */
+
+#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK             0x0000C000	/* Bus locking mask */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA              0x00000000	/* Bus lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK            0x00004000	/* Bus lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS            0x00008000	/* Bus lock over the transaction */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE           0x00020000	/* Bus lock enable */
+
+#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW       0x00040000	/* Destination channel handshaking signal polarity low */
+#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW       0x00080000	/* Source channel handshaking signal polarity low */
+
+#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK   0x3FF00000	/* Maximum AMBA burst length */
+
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC           0x40000000	/* Source address auto reload */
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST           0x80000000	/* Destination address auto reload */
+
+/* Bit mask for REG_DMACx_CFG_HI */
+#define dmacHw_REG_CFG_HI_FC_DST_READY              0x00000001	/* Source transaction request is serviced when destination is ready */
+#define dmacHw_REG_CFG_HI_FIFO_ENOUGH               0x00000002	/* Initiate burst transaction when enough data in available in FIFO */
+
+#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK            0x0000001C	/* AHB protection mask */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_1               0x00000004	/* AHB protection 1 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_2               0x00000008	/* AHB protection 2 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_3               0x00000010	/* AHB protection 3 */
+
+#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT           0x00000020	/* Destination status update enable */
+#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT           0x00000040	/* Source status update enable */
+
+#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK        0x00000780	/* Source peripheral hardware interface mask */
+#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK        0x00007800	/* Destination peripheral hardware interface mask */
+
+/* DMA Configuration Parameters */
+#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS          0x00000700	/* Number of channels */
+#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE         0x00001800	/* Number of master interface */
+#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE          0x0000000f	/* Maximum brust size */
+#define dmacHw_REG_COMP_PARAM_DATA_WIDTH            0x00006000	/* Data transfer width */
+
+/* Define GET/SET macros to program the registers */
+#define dmacHw_SET_SAR(module, channel, addr)          (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DAR(module, channel, addr)          (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_LLP(module, channel, ptr)           (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr))
+
+#define dmacHw_GET_SSTAT(module, channel)              (dmacHw_REG_SSTAT((module), (channel)))
+#define dmacHw_GET_DSTAT(module, channel)              (dmacHw_REG_DSTAT((module), (channel)))
+
+#define dmacHw_SET_SSTATAR(module, channel, addr)      (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DSTATAR(module, channel, addr)      (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr))
+
+#define dmacHw_SET_CONTROL_LO(module, channel, ctl)    (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_LO(module, channel)       (dmacHw_REG_CTL_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_LO(module, channel)         (dmacHw_REG_CTL_LO((module), (channel)))
+
+#define dmacHw_SET_CONTROL_HI(module, channel, ctl)    (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_HI(module, channel)       (dmacHw_REG_CTL_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_HI(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)))
+
+#define dmacHw_GET_BLOCK_SIZE(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK)
+#define dmacHw_DMA_COMPLETE(module, channel)           (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE)
+
+#define dmacHw_SET_CONFIG_LO(module, channel, cfg)     (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_LO(module, channel)        (dmacHw_REG_CFG_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_LO(module, channel)          (dmacHw_REG_CFG_LO((module), (channel)))
+#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len)    (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK))
+#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio))
+#define dmacHw_SET_AHB_HPROT(module, channel, protect)  (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect))
+
+#define dmacHw_SET_CONFIG_HI(module, channel, cfg)      (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_HI(module, channel)         (dmacHw_REG_CFG_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_HI(module, channel)           (dmacHw_REG_CFG_HI((module), (channel)))
+#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK))
+#define dmacHw_SRC_PERI_INTF(intf)                      (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)
+#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK))
+#define dmacHw_DST_PERI_INTF(intf)                      (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)
+
+#define dmacHw_DMA_START(module, channel)              (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_DMA_STOP(module, channel)               (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DMA_ENABLE(module)                      (dmacHw_REG_MISC_CFG((module)) = 1)
+#define dmacHw_DMA_DISABLE(module)                     (dmacHw_REG_MISC_CFG((module)) = 0)
+
+#define dmacHw_TRAN_INT_ENABLE(module, channel)        (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+
+#define dmacHw_TRAN_INT_DISABLE(module, channel)       (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_BLOCK_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_ERROR_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_STRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DTRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8)))
+
+#define dmacHw_TRAN_INT_CLEAR(module, channel)         (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel)))
+
+#define dmacHw_GET_NUM_CHANNEL(module)                 (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1)
+#define dmacHw_GET_NUM_INTERFACE(module)               (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1)
+#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel)     ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE)
+#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13)
+
+#endif /* _DMACHW_REG_H */
-- 
GitLab


From cf2ddacb567e85f40241f67b240fa445db7a424d Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:08:00 +0100
Subject: [PATCH 221/257] ARM: 5659/1: bcmring: add csp dmac source files

add csp dmac source files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/dmac/Makefile       |    1 +
 arch/arm/mach-bcmring/csp/dmac/dmacHw.c       |  917 +++++++++++++++
 arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c | 1017 +++++++++++++++++
 3 files changed, 1935 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/dmac/Makefile
 create mode 100644 arch/arm/mach-bcmring/csp/dmac/dmacHw.c
 create mode 100644 arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c

diff --git a/arch/arm/mach-bcmring/csp/dmac/Makefile b/arch/arm/mach-bcmring/csp/dmac/Makefile
new file mode 100644
index 00000000000..fb1104fe56b
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/Makefile
@@ -0,0 +1 @@
+obj-y += dmacHw.o dmacHw_extra.o
\ No newline at end of file
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
new file mode 100644
index 00000000000..7b9bac2d79a
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
@@ -0,0 +1,917 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw.c
+*
+*  @brief   Low level DMA controller driver routines
+*
+*  @note
+*
+*   These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/string.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* Allocate DMA control blocks */
+dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];
+
+uint32_t dmaChannelCount_0 = dmacHw_MAX_CHANNEL_COUNT / 2;
+uint32_t dmaChannelCount_1 = dmacHw_MAX_CHANNEL_COUNT / 2;
+
+/****************************************************************************/
+/**
+*  @brief   Get maximum FIFO for a DMA channel
+*
+*  @return  Maximum allowable FIFO size
+*
+*
+*/
+/****************************************************************************/
+static uint32_t GetFifoSize(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	uint32_t val = 0;
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_MISC_t *pMiscReg =
+	    (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module);
+
+	switch (pCblk->channel) {
+	case 0:
+		val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28;
+		break;
+	case 1:
+		val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28;
+		break;
+	case 2:
+		val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28;
+		break;
+	case 3:
+		val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28;
+		break;
+	case 4:
+		val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28;
+		break;
+	case 5:
+		val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28;
+		break;
+	case 6:
+		val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28;
+		break;
+	case 7:
+		val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28;
+		break;
+	}
+
+	if (val <= 0x4) {
+		return 8 << val;
+	} else {
+		dmacHw_ASSERT(0);
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to initiate transfer
+*
+*  @return  void
+*
+*
+*  @note
+*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
+*     - This function should also be called from ISR to program the channel with
+*       pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pProg;
+	dmacHw_CBLK_t *pCblk;
+
+	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		/* Not safe yet to program the channel */
+		return;
+	}
+
+	if (pCblk->varDataStarted) {
+		if (pCblk->descUpdated) {
+			pCblk->descUpdated = 0;
+			pProg =
+			    (dmacHw_DESC_t *) ((uint32_t)
+					       dmacHw_REG_LLP(pCblk->module,
+							      pCblk->channel) +
+					       pRing->virt2PhyOffset);
+
+			/* Load descriptor if not loaded */
+			if (!(pProg->ctl.hi & dmacHw_REG_CTL_DONE)) {
+				dmacHw_SET_SAR(pCblk->module, pCblk->channel,
+					       pProg->sar);
+				dmacHw_SET_DAR(pCblk->module, pCblk->channel,
+					       pProg->dar);
+				dmacHw_REG_CTL_LO(pCblk->module,
+						  pCblk->channel) =
+				    pProg->ctl.lo;
+				dmacHw_REG_CTL_HI(pCblk->module,
+						  pCblk->channel) =
+				    pProg->ctl.hi;
+			} else if (pProg == (dmacHw_DESC_t *) pRing->pEnd->llp) {
+				/* Return as end descriptor is processed */
+				return;
+			} else {
+				dmacHw_ASSERT(0);
+			}
+		} else {
+			return;
+		}
+	} else {
+		if (pConfig->transferMode == dmacHw_TRANSFER_MODE_PERIODIC) {
+			/* Do not make a single chain, rather process one descriptor at a time */
+			pProg = pRing->pHead;
+			/* Point to the next descriptor for next iteration */
+			dmacHw_NEXT_DESC(pRing, pHead);
+		} else {
+			/* Return if no more pending descriptor */
+			if (pRing->pEnd == NULL) {
+				return;
+			}
+
+			pProg = pRing->pProg;
+			if (pConfig->transferMode ==
+			    dmacHw_TRANSFER_MODE_CONTINUOUS) {
+				/* Make sure a complete ring can be formed */
+				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pEnd->
+					      llp == pRing->pProg);
+				/* Make sure pProg pointing to the pHead */
+				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pProg ==
+					      pRing->pHead);
+				/* Make a complete ring */
+				do {
+					pRing->pProg->ctl.lo |=
+					    (dmacHw_REG_CTL_LLP_DST_EN |
+					     dmacHw_REG_CTL_LLP_SRC_EN);
+					pRing->pProg =
+					    (dmacHw_DESC_t *) pRing->pProg->llp;
+				} while (pRing->pProg != pRing->pHead);
+			} else {
+				/* Make a single long chain */
+				while (pRing->pProg != pRing->pEnd) {
+					pRing->pProg->ctl.lo |=
+					    (dmacHw_REG_CTL_LLP_DST_EN |
+					     dmacHw_REG_CTL_LLP_SRC_EN);
+					pRing->pProg =
+					    (dmacHw_DESC_t *) pRing->pProg->llp;
+				}
+			}
+		}
+
+		/* Program the channel registers */
+		dmacHw_SET_SAR(pCblk->module, pCblk->channel, pProg->sar);
+		dmacHw_SET_DAR(pCblk->module, pCblk->channel, pProg->dar);
+		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+			       (uint32_t) pProg - pRing->virt2PhyOffset);
+		dmacHw_REG_CTL_LO(pCblk->module, pCblk->channel) =
+		    pProg->ctl.lo;
+		dmacHw_REG_CTL_HI(pCblk->module, pCblk->channel) =
+		    pProg->ctl.hi;
+		if (pRing->pEnd) {
+			/* Remember the descriptor to use next */
+			pRing->pProg = (dmacHw_DESC_t *) pRing->pEnd->llp;
+		}
+		/* Indicate no more pending descriptor  */
+		pRing->pEnd = (dmacHw_DESC_t *) NULL;
+	}
+	/* Start DMA operation */
+	dmacHw_DMA_START(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes DMA
+*
+*  This function initializes DMA CSP driver
+*
+*  @note
+*     Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void)
+{
+
+	uint32_t i = 0;
+
+	dmaChannelCount_0 = dmacHw_GET_NUM_CHANNEL(0);
+	dmaChannelCount_1 = dmacHw_GET_NUM_CHANNEL(1);
+
+	/* Enable access to the DMA block */
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC0);
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC1);
+
+	if ((dmaChannelCount_0 + dmaChannelCount_1) > dmacHw_MAX_CHANNEL_COUNT) {
+		dmacHw_ASSERT(0);
+	}
+
+	memset((void *)dmacHw_gCblk, 0,
+	       sizeof(dmacHw_CBLK_t) * (dmaChannelCount_0 + dmaChannelCount_1));
+	for (i = 0; i < dmaChannelCount_0; i++) {
+		dmacHw_gCblk[i].module = 0;
+		dmacHw_gCblk[i].channel = i;
+	}
+	for (i = 0; i < dmaChannelCount_1; i++) {
+		dmacHw_gCblk[i + dmaChannelCount_0].module = 1;
+		dmacHw_gCblk[i + dmaChannelCount_0].channel = i;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Exit function for  DMA
+*
+*  This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void)
+{
+	/* Disable access to the DMA block */
+	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC0);
+	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets a handle to a DMA channel
+*
+*  This function returns a handle, representing a control block of a particular DMA channel
+*
+*  @return  -1       - On Failure
+*            handle  - On Success, representing a channel control block
+*
+*  @note
+*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
+    ) {
+	int idx;
+
+	switch ((channelId >> 8)) {
+	case 0:
+		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_0);
+		idx = (channelId & 0xff);
+		break;
+	case 1:
+		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_1);
+		idx = dmaChannelCount_0 + (channelId & 0xff);
+		break;
+	default:
+		dmacHw_ASSERT(0);
+		return (dmacHw_HANDLE_t) -1;
+	}
+
+	return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[idx]);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes a DMA channel for use
+*
+*  This function initializes and resets a DMA channel for use
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	int module = pCblk->module;
+	int channel = pCblk->channel;
+
+	/* Reinitialize the control block */
+	memset((void *)pCblk, 0, sizeof(dmacHw_CBLK_t));
+	pCblk->module = module;
+	pCblk->channel = channel;
+
+	/* Enable DMA controller */
+	dmacHw_DMA_ENABLE(pCblk->module);
+	/* Reset DMA channel */
+	dmacHw_RESET_CONTROL_LO(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONTROL_HI(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONFIG_LO(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONFIG_HI(pCblk->module, pCblk->channel);
+
+	/* Clear all raw interrupt status */
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+	/* Mask event specific interrupts */
+	dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_STRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_DTRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief  Finds amount of memory required to form a descriptor ring
+*
+*
+*  @return   Number of bytes required to form a descriptor ring
+*
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt	/* [ IN ] Number of descriptor in the ring */
+    ) {
+	/* Need extra 4 byte to ensure 32 bit alignment  */
+	return (descCnt * sizeof(dmacHw_DESC_t)) + sizeof(dmacHw_DESC_RING_t) +
+		sizeof(uint32_t);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes descriptor ring
+*
+*  This function will initializes the descriptor ring of a DMA channel
+*
+*
+*  @return   -1 - On failure
+*             0 - On success
+*  @note
+*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
+*     - Descriptor buffer MUST be 32 bit aligned and uncached as it is
+*       accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+			  uint32_t len,	/*  [ IN ] Size of the pBuf */
+			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
+    ) {
+	uint32_t i;
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pDesc;
+
+	/* Check the alignment of the descriptor */
+	if ((uint32_t) pDescriptorVirt & 0x00000003) {
+		dmacHw_ASSERT(0);
+		return -1;
+	}
+
+	/* Check if enough space has been allocated for descriptor ring */
+	if (len < dmacHw_descriptorLen(num)) {
+		return -1;
+	}
+
+	pRing = dmacHw_GET_DESC_RING(pDescriptorVirt);
+	pRing->pHead =
+	    (dmacHw_DESC_t *) ((uint32_t) pRing + sizeof(dmacHw_DESC_RING_t));
+	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+	pRing->pProg = dmacHw_DESC_INIT;
+	/* Initialize link item chain, starting from the head */
+	pDesc = pRing->pHead;
+	/* Find the offset between virtual to physical address */
+	pRing->virt2PhyOffset = (uint32_t) pDescriptorVirt - descriptorPhyAddr;
+
+	/* Form the descriptor ring */
+	for (i = 0; i < num - 1; i++) {
+		/* Clear link list item */
+		memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+		/* Point to the next item in the physical address */
+		pDesc->llpPhy = (uint32_t) (pDesc + 1) - pRing->virt2PhyOffset;
+		/* Point to the next item in the virtual address */
+		pDesc->llp = (uint32_t) (pDesc + 1);
+		/* Mark descriptor is ready to use */
+		pDesc->ctl.hi = dmacHw_DESC_FREE;
+		/* Look into next link list item */
+		pDesc++;
+	}
+
+	/* Clear last link list item */
+	memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+	/* Last item pointing to the first item in the
+	   physical address to complete the ring */
+	pDesc->llpPhy = (uint32_t) pRing->pHead - pRing->virt2PhyOffset;
+	/* Last item pointing to the first item in the
+	   virtual address to complete the ring
+	 */
+	pDesc->llp = (uint32_t) pRing->pHead;
+	/* Mark descriptor is ready to use */
+	pDesc->ctl.hi = dmacHw_DESC_FREE;
+	/* Set the number of descriptors in the ring */
+	pRing->num = num;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configure DMA channel
+*
+*  @return  0  : On success
+*           -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	uint32_t cfgHigh = 0;
+	int srcTrSize;
+	int dstTrSize;
+
+	pCblk->varDataStarted = 0;
+	pCblk->userData = NULL;
+
+	/* Configure
+	   - Burst transaction when enough data in available in FIFO
+	   - AHB Access protection 1
+	   - Source and destination peripheral ports
+	 */
+	cfgHigh =
+	    dmacHw_REG_CFG_HI_FIFO_ENOUGH | dmacHw_REG_CFG_HI_AHB_HPROT_1 |
+	    dmacHw_SRC_PERI_INTF(pConfig->
+				 srcPeripheralPort) |
+	    dmacHw_DST_PERI_INTF(pConfig->dstPeripheralPort);
+	/* Set priority */
+	dmacHw_SET_CHANNEL_PRIORITY(pCblk->module, pCblk->channel,
+				    pConfig->channelPriority);
+
+	if (pConfig->dstStatusRegisterAddress != 0) {
+		/* Destination status update enable */
+		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_DST_STAT;
+		/* Configure status registers */
+		dmacHw_SET_DSTATAR(pCblk->module, pCblk->channel,
+				   pConfig->dstStatusRegisterAddress);
+	}
+
+	if (pConfig->srcStatusRegisterAddress != 0) {
+		/* Source status update enable */
+		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_SRC_STAT;
+		/* Source status update enable */
+		dmacHw_SET_SSTATAR(pCblk->module, pCblk->channel,
+				   pConfig->srcStatusRegisterAddress);
+	}
+	/* Configure the config high register */
+	dmacHw_GET_CONFIG_HI(pCblk->module, pCblk->channel) = cfgHigh;
+
+	/* Clear all raw interrupt status */
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+	/* Configure block interrupt */
+	if (pConfig->blockTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_BLOCK_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure complete transfer interrupt */
+	if (pConfig->completeTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_TRAN_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure error interrupt */
+	if (pConfig->errorInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_ERROR_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure gather register */
+	if (pConfig->srcGatherWidth) {
+		srcTrSize =
+		    dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+		if (!
+		    ((pConfig->srcGatherWidth % srcTrSize)
+		     && (pConfig->srcGatherJump % srcTrSize))) {
+			dmacHw_REG_SGR_LO(pCblk->module, pCblk->channel) =
+			    ((pConfig->srcGatherWidth /
+			      srcTrSize) << 20) | (pConfig->srcGatherJump /
+						   srcTrSize);
+		} else {
+			return -1;
+		}
+	}
+	/* Configure scatter register */
+	if (pConfig->dstScatterWidth) {
+		dstTrSize =
+		    dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+		if (!
+		    ((pConfig->dstScatterWidth % dstTrSize)
+		     && (pConfig->dstScatterJump % dstTrSize))) {
+			dmacHw_REG_DSR_LO(pCblk->module, pCblk->channel) =
+			    ((pConfig->dstScatterWidth /
+			      dstTrSize) << 20) | (pConfig->dstScatterJump /
+						   dstTrSize);
+		} else {
+			return -1;
+		}
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indicates whether DMA transfer is in progress or completed
+*
+*  @return   DMA transfer status
+*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
+*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
+*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		return dmacHw_TRANSFER_STATUS_BUSY;
+	} else if (dmacHw_REG_INT_RAW_ERROR(pCblk->module) &
+		   (0x00000001 << pCblk->channel)) {
+		return dmacHw_TRANSFER_STATUS_ERROR;
+	}
+
+	return dmacHw_TRANSFER_STATUS_DONE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptors for known data length
+*
+*  When DMA has to work as a flow controller, this function prepares the
+*  descriptor chain to transfer data
+*
+*  from:
+*          - Memory to memory
+*          - Peripheral to memory
+*          - Memory to Peripheral
+*          - Peripheral to Peripheral
+*
+*  @return   -1 - On failure
+*             0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			     void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+			     void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+			     size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	dmacHw_DESC_t *pStart;
+	dmacHw_DESC_t *pProg;
+	int srcTs = 0;
+	int blkTs = 0;
+	int oddSize = 0;
+	int descCount = 0;
+	int count = 0;
+	int dstTrSize = 0;
+	int srcTrSize = 0;
+	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+
+	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+	/* Skip Tx if buffer is NULL  or length is unknown */
+	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+		/* Do not initiate transfer */
+		return -1;
+	}
+
+	/* Ensure scatter and gather are transaction aligned */
+	if ((pConfig->srcGatherWidth % srcTrSize)
+	    || (pConfig->dstScatterWidth % dstTrSize)) {
+		return -2;
+	}
+
+	/*
+	   Background 1: DMAC can not perform DMA if source and destination addresses are
+	   not properly aligned with the channel's transaction width. So, for successful
+	   DMA transfer, transaction width must be set according to the alignment of the
+	   source and destination address.
+	 */
+
+	/* Adjust destination transaction width if destination address is not aligned properly */
+	dstTrWidth = pConfig->dstMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+	}
+
+	/* Adjust source transaction width if source address is not aligned properly */
+	srcTrWidth = pConfig->srcMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+	}
+
+	/* Find the maximum transaction per descriptor */
+	if (pConfig->maxDataPerBlock
+	    && ((pConfig->maxDataPerBlock / srcTrSize) <
+		dmacHw_MAX_BLOCKSIZE)) {
+		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+	}
+
+	/* Find number of source transactions needed to complete the DMA transfer */
+	srcTs = dataLen / srcTrSize;
+	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
+	if (srcTs && (dstTrSize > srcTrSize)) {
+		oddSize = dataLen % dstTrSize;
+		/* Adjust source transaction count due to "oddSize" */
+		srcTs = srcTs - (oddSize / srcTrSize);
+	} else {
+		oddSize = dataLen % srcTrSize;
+	}
+	/* Adjust "descCount" due to "oddSize" */
+	if (oddSize) {
+		descCount++;
+	}
+	/* Find the number of descriptor needed for total "srcTs" */
+	if (srcTs) {
+		descCount += ((srcTs - 1) / maxBlockSize) + 1;
+	}
+
+	/* Check the availability of "descCount" discriptors in the ring */
+	pProg = pRing->pHead;
+	for (count = 0; (descCount <= pRing->num) && (count < descCount);
+	     count++) {
+		if ((pProg->ctl.hi & dmacHw_DESC_FREE) == 0) {
+			/* Sufficient descriptors are not available */
+			return -3;
+		}
+		pProg = (dmacHw_DESC_t *) pProg->llp;
+	}
+
+	/* Remember the link list item to program the channel registers */
+	pStart = pProg = pRing->pHead;
+	/* Make a link list with "descCount(=count)" number of descriptors */
+	while (count) {
+		/* Reset channel control information */
+		pProg->ctl.lo = 0;
+		/* Enable source gather if configured */
+		if (pConfig->srcGatherWidth) {
+			pProg->ctl.lo |= dmacHw_REG_CTL_SG_ENABLE;
+		}
+		/* Enable destination scatter if configured */
+		if (pConfig->dstScatterWidth) {
+			pProg->ctl.lo |= dmacHw_REG_CTL_DS_ENABLE;
+		}
+		/* Set source and destination address */
+		pProg->sar = (uint32_t) pSrcAddr;
+		pProg->dar = (uint32_t) pDstAddr;
+		/* Use "devCtl" to mark that user memory need to be freed later if needed */
+		if (pProg == pRing->pHead) {
+			pProg->devCtl = dmacHw_FREE_USER_MEMORY;
+		} else {
+			pProg->devCtl = 0;
+		}
+
+		blkTs = srcTs;
+
+		/* Special treatmeant for last descriptor */
+		if (count == 1) {
+			/* Mark the last descriptor */
+			pProg->ctl.lo &=
+			    ~(dmacHw_REG_CTL_LLP_DST_EN |
+			      dmacHw_REG_CTL_LLP_SRC_EN);
+			/* Treatment for odd data bytes */
+			if (oddSize) {
+				/* Adjust for single byte transaction width */
+				switch (pConfig->transferType) {
+				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+					dstTrWidth =
+					    dmacHw_DST_TRANSACTION_WIDTH_8;
+					blkTs =
+					    (oddSize / srcTrSize) +
+					    ((oddSize % srcTrSize) ? 1 : 0);
+					break;
+				case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+					srcTrWidth =
+					    dmacHw_SRC_TRANSACTION_WIDTH_8;
+					blkTs = oddSize;
+					break;
+				case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+					srcTrWidth =
+					    dmacHw_SRC_TRANSACTION_WIDTH_8;
+					dstTrWidth =
+					    dmacHw_DST_TRANSACTION_WIDTH_8;
+					blkTs = oddSize;
+					break;
+				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+					/* Do not adjust the transaction width  */
+					break;
+				}
+			} else {
+				srcTs -= blkTs;
+			}
+		} else {
+			if (srcTs / maxBlockSize) {
+				blkTs = maxBlockSize;
+			}
+			/* Remaining source transactions for next iteration */
+			srcTs -= blkTs;
+		}
+		/* Must have a valid source transactions */
+		dmacHw_ASSERT(blkTs > 0);
+		/* Set control information */
+		if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+			pProg->ctl.lo |= pConfig->transferType |
+			    pConfig->srcUpdate |
+			    pConfig->dstUpdate |
+			    srcTrWidth |
+			    dstTrWidth |
+			    pConfig->srcMaxBurstWidth |
+			    pConfig->dstMaxBurstWidth |
+			    pConfig->srcMasterInterface |
+			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+		} else {
+			uint32_t transferType = 0;
+			switch (pConfig->transferType) {
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+				transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+				transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+				break;
+			default:
+				dmacHw_ASSERT(0);
+			}
+			pProg->ctl.lo |= transferType |
+			    pConfig->srcUpdate |
+			    pConfig->dstUpdate |
+			    srcTrWidth |
+			    dstTrWidth |
+			    pConfig->srcMaxBurstWidth |
+			    pConfig->dstMaxBurstWidth |
+			    pConfig->srcMasterInterface |
+			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+		}
+
+		/* Set block transaction size */
+		pProg->ctl.hi = blkTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+		/* Look for next descriptor */
+		if (count > 1) {
+			/* Point to the next descriptor */
+			pProg = (dmacHw_DESC_t *) pProg->llp;
+
+			/* Update source and destination address for next iteration */
+			switch (pConfig->transferType) {
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+				if (pConfig->dstScatterWidth) {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->dstScatterWidth) *
+					     pConfig->dstScatterJump);
+				} else {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+				if (pConfig->srcGatherWidth) {
+					pSrcAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->srcGatherWidth) *
+					     pConfig->srcGatherJump);
+				} else {
+					pSrcAddr =
+					    (char *)pSrcAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+				if (pConfig->dstScatterWidth) {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->dstScatterWidth) *
+					     pConfig->dstScatterJump);
+				} else {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize;
+				}
+
+				if (pConfig->srcGatherWidth) {
+					pSrcAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->srcGatherWidth) *
+					     pConfig->srcGatherJump);
+				} else {
+					pSrcAddr =
+					    (char *)pSrcAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+				/* Do not adjust the address */
+				break;
+			default:
+				dmacHw_ASSERT(0);
+			}
+		} else {
+			/* At the end of transfer "srcTs" must be zero */
+			dmacHw_ASSERT(srcTs == 0);
+		}
+		count--;
+	}
+
+	/* Remember the descriptor to initialize the registers */
+	if (pRing->pProg == dmacHw_DESC_INIT) {
+		pRing->pProg = pStart;
+	}
+	/* Indicate that the descriptor is updated */
+	pRing->pEnd = pProg;
+	/* Head pointing to the next descriptor */
+	pRing->pHead = (dmacHw_DESC_t *) pProg->llp;
+	/* Update Tail pointer if destination is a peripheral,
+	   because no one is going to read from the pTail
+	 */
+	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+		pRing->pTail = pRing->pHead;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Provides DMA controller attributes
+*
+*
+*  @return  DMA controller attributes
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle */
+					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	switch (attr) {
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM:
+		return dmacHw_GET_NUM_CHANNEL(pCblk->module);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE:
+		return (1 <<
+			 (dmacHw_GET_MAX_BLOCK_SIZE
+			  (pCblk->module, pCblk->module) + 2)) - 8;
+	case dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM:
+		return dmacHw_GET_NUM_INTERFACE(pCblk->module);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH:
+		return 32 << dmacHw_GET_CHANNEL_DATA_WIDTH(pCblk->module,
+							   pCblk->channel);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE:
+		return GetFifoSize(handle);
+	}
+	dmacHw_ASSERT(0);
+	return 0;
+}
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
new file mode 100644
index 00000000000..ff7b436d093
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -0,0 +1,1017 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_extra.c
+*
+*  @brief   Extra Low level DMA controller driver routines
+*
+*  @note
+*
+*   These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+
+extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];	/* Declared in dmacHw.c */
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* ---- Internal Use Function Prototypes --------------------------------- */
+/****************************************************************************/
+/**
+*  @brief   Overwrites data length in the descriptor
+*
+*  This function overwrites data length in the descriptor
+*
+*
+*  @return   void
+*
+*  @note
+*          This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			  size_t dataLen	/*   [ IN ] Data length in bytes */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Helper function to display DMA registers
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static void DisplayRegisterContents(int module,	/*   [ IN ] DMA Controller unit  (0-1) */
+				    int channel,	/*   [ IN ] DMA Channel          (0-7) / -1(all) */
+				    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
+    ) {
+	int chan;
+
+	(*fpPrint) ("Displaying register content \n\n");
+	(*fpPrint) ("Module %d: Interrupt raw transfer              0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw block                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt raw src transfer          0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw dst transfer          0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw error                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt stat transfer             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat block                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt stat src transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat dst transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat error                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt mask transfer             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask block                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt mask src transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask dst transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask error                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt clear transfer            0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear block               0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt clear src transfer        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear dst transfer        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear error               0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: SW source req                       0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest req                         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module)));
+	(*fpPrint) ("Module %d: SW source signal                    0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest signal                      0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module)));
+	(*fpPrint) ("Module %d: SW source last                      0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest last                        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: misc config                         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_CFG(module)));
+	(*fpPrint) ("Module %d: misc channel enable                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module)));
+	(*fpPrint) ("Module %d: misc ID                             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_ID(module)));
+	(*fpPrint) ("Module %d: misc test                           0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_TEST(module)));
+
+	if (channel == -1) {
+		for (chan = 0; chan < 8; chan++) {
+			(*fpPrint)
+			    ("--------------------------------------------------\n");
+			(*fpPrint)
+			    ("Module %d: Channel %d Source                   0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Destination              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d LLP                      0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_LLP(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Control (LO)             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Control (HI)             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Source Stats             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Dest Stats               0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Config (LO)              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Config (HI)              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+		}
+	} else {
+		chan = channel;
+		(*fpPrint)
+		    ("--------------------------------------------------\n");
+		(*fpPrint)
+		    ("Module %d: Channel %d Source                   0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Destination              0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d LLP                      0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Control (LO)             0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Control (HI)             0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Source Stats             0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Dest Stats               0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Config (LO)              0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Config (HI)              0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Helper function to display descriptor ring
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static void DisplayDescRing(void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	dmacHw_DESC_t *pStart;
+
+	if (pRing->pHead == NULL) {
+		return;
+	}
+
+	pStart = pRing->pHead;
+
+	while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) {
+		if (pStart == pRing->pHead) {
+			(*fpPrint) ("Head\n");
+		}
+		if (pStart == pRing->pTail) {
+			(*fpPrint) ("Tail\n");
+		}
+		if (pStart == pRing->pProg) {
+			(*fpPrint) ("Prog\n");
+		}
+		if (pStart == pRing->pEnd) {
+			(*fpPrint) ("End\n");
+		}
+		if (pStart == pRing->pFree) {
+			(*fpPrint) ("Free\n");
+		}
+		(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+		(*fpPrint) ("sar    0x%0X\n", pStart->sar);
+		(*fpPrint) ("dar    0x%0X\n", pStart->dar);
+		(*fpPrint) ("llp    0x%0X\n", pStart->llp);
+		(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+		(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+		(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
+		(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
+		(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+
+		pStart = (dmacHw_DESC_t *) pStart->llp;
+	}
+	if (pStart == pRing->pHead) {
+		(*fpPrint) ("Head\n");
+	}
+	if (pStart == pRing->pTail) {
+		(*fpPrint) ("Tail\n");
+	}
+	if (pStart == pRing->pProg) {
+		(*fpPrint) ("Prog\n");
+	}
+	if (pStart == pRing->pEnd) {
+		(*fpPrint) ("End\n");
+	}
+	if (pStart == pRing->pFree) {
+		(*fpPrint) ("Free\n");
+	}
+	(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+	(*fpPrint) ("sar    0x%0X\n", pStart->sar);
+	(*fpPrint) ("dar    0x%0X\n", pStart->dar);
+	(*fpPrint) ("llp    0x%0X\n", pStart->llp);
+	(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+	(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+	(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
+	(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
+	(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Check if DMA channel is the flow controller
+*
+*  @return  1 : If DMA is a flow controler
+*           0 : Peripheral is the flow controller
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline int DmaIsFlowController(void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	uint32_t ttfc =
+	    (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl.
+	    lo & dmacHw_REG_CTL_TTFC_MASK;
+
+	switch (ttfc) {
+	case dmacHw_REG_CTL_TTFC_MM_DMAC:
+	case dmacHw_REG_CTL_TTFC_MP_DMAC:
+	case dmacHw_REG_CTL_TTFC_PM_DMAC:
+	case dmacHw_REG_CTL_TTFC_PP_DMAC:
+		return 1;
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Overwrites data length in the descriptor
+*
+*  This function overwrites data length in the descriptor
+*
+*
+*  @return   void
+*
+*  @note
+*          This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			  size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	dmacHw_DESC_t *pProg;
+	dmacHw_DESC_t *pHead;
+	int srcTs = 0;
+	int srcTrSize = 0;
+
+	pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead;
+	pProg = pHead;
+
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+	srcTs = dataLen / srcTrSize;
+	do {
+		pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+		pProg = (dmacHw_DESC_t *) pProg->llp;
+	} while (pProg != pHead);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the DMA channel specific interrupt
+*
+*
+*  @return   void
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Returns the cause of channel specific DMA interrupt
+*
+*  This function returns the cause of interrupt
+*
+*  @return  Interrupt status, each bit representing a specific type of interrupt
+*
+*  @note
+*     Should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE;
+
+	if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_TRANS;
+	}
+	if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_BLOCK;
+	}
+	if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_ERROR;
+	}
+
+	return status;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a DMA channel causing interrupt
+*
+*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+*  @return  NULL   : No channel causing DMA interrupt
+*           ! NULL : Handle to a channel causing DMA interrupt
+*  @note
+*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void)
+{
+	uint32_t i;
+
+	for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) {
+		if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) &
+		     ((0x00000001 << dmacHw_gCblk[i].channel)))
+		    || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) &
+			((0x00000001 << dmacHw_gCblk[i].channel)))
+		    || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) &
+			((0x00000001 << dmacHw_gCblk[i].channel)))
+		    ) {
+			return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]);
+		}
+	}
+	return dmacHw_CBLK_TO_HANDLE(NULL);
+}
+
+/****************************************************************************/
+/**
+*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+				    size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	int srcTs = 0;
+	int oddSize = 0;
+	int descCount = 0;
+	int dstTrSize = 0;
+	int srcTrSize = 0;
+	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+
+	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+	/* Skip Tx if buffer is NULL  or length is unknown */
+	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+		/* Do not initiate transfer */
+		return -1;
+	}
+
+	/* Ensure scatter and gather are transaction aligned */
+	if (pConfig->srcGatherWidth % srcTrSize
+	    || pConfig->dstScatterWidth % dstTrSize) {
+		return -1;
+	}
+
+	/*
+	   Background 1: DMAC can not perform DMA if source and destination addresses are
+	   not properly aligned with the channel's transaction width. So, for successful
+	   DMA transfer, transaction width must be set according to the alignment of the
+	   source and destination address.
+	 */
+
+	/* Adjust destination transaction width if destination address is not aligned properly */
+	dstTrWidth = pConfig->dstMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+	}
+
+	/* Adjust source transaction width if source address is not aligned properly */
+	srcTrWidth = pConfig->srcMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+	}
+
+	/* Find the maximum transaction per descriptor */
+	if (pConfig->maxDataPerBlock
+	    && ((pConfig->maxDataPerBlock / srcTrSize) <
+		dmacHw_MAX_BLOCKSIZE)) {
+		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+	}
+
+	/* Find number of source transactions needed to complete the DMA transfer */
+	srcTs = dataLen / srcTrSize;
+	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
+	if (srcTs && (dstTrSize > srcTrSize)) {
+		oddSize = dataLen % dstTrSize;
+		/* Adjust source transaction count due to "oddSize" */
+		srcTs = srcTs - (oddSize / srcTrSize);
+	} else {
+		oddSize = dataLen % srcTrSize;
+	}
+	/* Adjust "descCount" due to "oddSize" */
+	if (oddSize) {
+		descCount++;
+	}
+
+	/* Find the number of descriptor needed for total "srcTs" */
+	if (srcTs) {
+		descCount += ((srcTs - 1) / maxBlockSize) + 1;
+	}
+
+	return descCount;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Check the existance of pending descriptor
+*
+*  This function confirmes if there is any pending descriptor in the chain
+*  to program the channel
+*
+*  @return  1 : Channel need to be programmed with pending descriptor
+*           0 : No more pending descriptor to programe the channel
+*
+*  @note
+*     - This function should be called from ISR in case there are pending
+*       descriptor to program the channel.
+*
+*     Example:
+*
+*     dmac_isr ()
+*     {
+*         ...
+*         if (dmacHw_descriptorPending (handle))
+*         {
+*            dmacHw_initiateTransfer (handle);
+*         }
+*     }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	/* Make sure channel is not busy */
+	if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		/* Check if pEnd is not processed */
+		if (pRing->pEnd) {
+			/* Something left for processing */
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to stop transfer
+*
+*  Ensures the channel is not doing any transfer after calling this function
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk;
+
+	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	/* Stop the channel */
+	dmacHw_DMA_STOP(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Deallocates source or destination memory, allocated
+*
+*  This function can be called to deallocate data memory that was DMAed successfully
+*
+*  @return  On failure : -1
+*           On success : Number of buffer freed
+*
+*  @note
+*     This function will be called ONLY, when source OR destination address is pointing
+*     to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+		   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+		   void (*fpFree) (void *)	/*   [ IN ] Function pointer to free data memory */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	uint32_t count = 0;
+
+	if (fpFree == NULL) {
+		return -1;
+	}
+
+	while ((pRing->pFree != pRing->pTail)
+	       && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) {
+		if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) {
+			/* Identify, which memory to free */
+			if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+				(*fpFree) ((void *)pRing->pFree->dar);
+			} else {
+				/* Destination was a peripheral */
+				(*fpFree) ((void *)pRing->pFree->sar);
+			}
+			/* Unmark user memory to indicate it is freed */
+			pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY;
+		}
+		dmacHw_NEXT_DESC(pRing, pFree);
+
+		count++;
+	}
+
+	return count;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
+*
+*  This function will update the discriptor ring by allocating buffers, when source peripheral
+*  has to work as a flow controller to transfer data from:
+*           - Peripheral to memory.
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor updated
+*
+*
+*  @note
+*     Channel must be configured for peripheral to memory transfer
+*
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+				     uint32_t srcAddr,	/*   [ IN ] Source peripheral address */
+				     void *(*fpAlloc) (int len),	/*   [ IN ] Function pointer  that provides destination memory */
+				     int len,	/*   [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+				     int num	/*   [ IN ] Number of descriptor to set */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_DESC_t *pProg = NULL;
+	dmacHw_DESC_t *pLast = NULL;
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	uint32_t dstAddr;
+	uint32_t controlParam;
+	int i;
+
+	dmacHw_ASSERT(pConfig->transferType ==
+		      dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM);
+
+	if (num > pRing->num) {
+		return -1;
+	}
+
+	pLast = pRing->pEnd;	/* Last descriptor updated */
+	pProg = pRing->pHead;	/* First descriptor in the new list */
+
+	controlParam = pConfig->srcUpdate |
+	    pConfig->dstUpdate |
+	    pConfig->srcMaxTransactionWidth |
+	    pConfig->dstMaxTransactionWidth |
+	    pConfig->srcMasterInterface |
+	    pConfig->dstMasterInterface |
+	    pConfig->srcMaxBurstWidth |
+	    pConfig->dstMaxBurstWidth |
+	    dmacHw_REG_CTL_TTFC_PM_PERI |
+	    dmacHw_REG_CTL_LLP_DST_EN |
+	    dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN;
+
+	for (i = 0; i < num; i++) {
+		/* Allocate Rx buffer only for idle descriptor */
+		if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+		    ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail)
+		    ) {
+			/* Rx descriptor is not idle */
+			break;
+		}
+		/* Set source address */
+		pRing->pHead->sar = srcAddr;
+		if (fpAlloc) {
+			/* Allocate memory for buffer in descriptor */
+			dstAddr = (uint32_t) (*fpAlloc) (len);
+			/* Check the destination address */
+			if (dstAddr == 0) {
+				if (i == 0) {
+					/* Not a single descriptor is available */
+					return -1;
+				}
+				break;
+			}
+			/* Set destination address */
+			pRing->pHead->dar = dstAddr;
+		}
+		/* Set control information */
+		pRing->pHead->ctl.lo = controlParam;
+		/* Use "devCtl" to mark the memory that need to be freed later */
+		pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY;
+		/* Descriptor is now owned by the channel */
+		pRing->pHead->ctl.hi = 0;
+		/* Remember the descriptor last updated */
+		pRing->pEnd = pRing->pHead;
+		/* Update next descriptor */
+		dmacHw_NEXT_DESC(pRing, pHead);
+	}
+
+	/* Mark the end of the list */
+	pRing->pEnd->ctl.lo &=
+	    ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN);
+	/* Connect the list */
+	if (pLast != pProg) {
+		pLast->ctl.lo |=
+		    dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN;
+	}
+	/* Mark the descriptors are updated */
+	pCblk->descUpdated = 1;
+	if (!pCblk->varDataStarted) {
+		/* LLP must be pointing to the first descriptor */
+		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+			       (uint32_t) pProg - pRing->virt2PhyOffset);
+		/* Channel, handling variable data started */
+		pCblk->varDataStarted = 1;
+	}
+
+	return i;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Read data DMAed to memory
+*
+*  This function will read data that has been DMAed to memory while transfering from:
+*          - Memory to memory
+*          - Peripheral to memory
+*
+*  @param    handle     -
+*  @param    ppBbuf     -
+*  @param    pLen       -
+*
+*  @return  0 - No more data is available to read
+*           1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			       dmacHw_CONFIG_t *pConfig,	/*   [ IN ]  Configuration settings */
+			       void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			       void **ppBbuf,	/*   [ OUT ] Data received */
+			       size_t *pLlen	/*   [ OUT ] Length of the data received */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	(void)handle;
+
+	if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) {
+		if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+		    (pRing->pTail == pRing->pHead)
+		    ) {
+			/* No receive data available */
+			*ppBbuf = (char *)NULL;
+			*pLlen = 0;
+
+			return 0;
+		}
+	}
+
+	/* Return read buffer and length */
+	*ppBbuf = (char *)pRing->pTail->dar;
+
+	/* Extract length of the received data */
+	if (DmaIsFlowController(pDescriptor)) {
+		uint32_t srcTrSize = 0;
+
+		switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_8:
+			srcTrSize = 1;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_16:
+			srcTrSize = 2;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_32:
+			srcTrSize = 4;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_64:
+			srcTrSize = 8;
+			break;
+		default:
+			dmacHw_ASSERT(0);
+		}
+		/* Calculate length from the block size */
+		*pLlen =
+		    (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) *
+		    srcTrSize;
+	} else {
+		/* Extract length from the source peripheral */
+		*pLlen = pRing->pTail->sstat;
+	}
+
+	/* Advance tail to next descriptor */
+	dmacHw_NEXT_DESC(pRing, pTail);
+
+	return 1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptor carrying control information
+*
+*  This function will be used to send specific control information to the device
+*  using the DMA channel
+*
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+				uint32_t ctlAddress,	/*   [ IN ] Address of the device control register */
+				uint32_t control	/*   [ IN ] Device control information */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	if (ctlAddress == 0) {
+		return -1;
+	}
+
+	/* Check the availability of descriptors in the ring */
+	if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) {
+		return -1;
+	}
+	/* Set control information */
+	pRing->pHead->devCtl = control;
+	/* Set source and destination address */
+	pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl;
+	pRing->pHead->dar = ctlAddress;
+	/* Set control parameters */
+	if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+		pRing->pHead->ctl.lo = pConfig->transferType |
+		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
+		    pConfig->dstMaxTransactionWidth |
+		    dmacHw_SRC_BURST_WIDTH_0 |
+		    dmacHw_DST_BURST_WIDTH_0 |
+		    pConfig->srcMasterInterface |
+		    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+	} else {
+		uint32_t transferType = 0;
+		switch (pConfig->transferType) {
+		case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+			transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+			break;
+		case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+			transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+			break;
+		default:
+			dmacHw_ASSERT(0);
+		}
+		pRing->pHead->ctl.lo = transferType |
+		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
+		    pConfig->dstMaxTransactionWidth |
+		    dmacHw_SRC_BURST_WIDTH_0 |
+		    dmacHw_DST_BURST_WIDTH_0 |
+		    pConfig->srcMasterInterface |
+		    pConfig->dstMasterInterface |
+		    pConfig->flowControler | dmacHw_REG_CTL_INT_EN;
+	}
+
+	/* Set block transaction size to one 32 bit transaction */
+	pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1;
+
+	/* Remember the descriptor to initialize the registers */
+	if (pRing->pProg == dmacHw_DESC_INIT) {
+		pRing->pProg = pRing->pHead;
+	}
+	pRing->pEnd = pRing->pHead;
+
+	/* Advance the descriptor */
+	dmacHw_NEXT_DESC(pRing, pHead);
+
+	/* Update Tail pointer if destination is a peripheral */
+	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+		pRing->pTail = pRing->pHead;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Sets channel specific user data
+*
+*  This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			       void *userData	/*  [ IN ] User data */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	pCblk->userData = userData;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets channel specific user data
+*
+*  This function returns user data specific to a DMA channel
+*
+*  @return   user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	return pCblk->userData;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Resets descriptor control information
+*
+*  @return  void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    ) {
+	int i;
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pDesc;
+
+	pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	pDesc = pRing->pHead;
+
+	for (i = 0; i < pRing->num; i++) {
+		/* Mark descriptor is ready to use */
+		pDesc->ctl.hi = dmacHw_DESC_FREE;
+		/* Look into next link list item */
+		pDesc++;
+	}
+	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+	pRing->pProg = dmacHw_DESC_INIT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Displays channel specific registers and other control parameters
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint);
+	DisplayDescRing(pDescriptor, fpPrint);
+}
-- 
GitLab


From 7ba09020287fa6c181707490ea7143abb3db55b1 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:09:49 +0100
Subject: [PATCH 222/257] ARM: 5660/1: bcmring: add csp timer block header and
 source files

add csp timer block header and source files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/tmr/Makefile        |   1 +
 arch/arm/mach-bcmring/csp/tmr/tmrHw.c         | 576 ++++++++++++++++++
 arch/arm/mach-bcmring/include/csp/tmrHw.h     | 263 ++++++++
 .../mach-bcmring/include/mach/csp/tmrHw_reg.h |  82 +++
 4 files changed, 922 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/tmr/Makefile
 create mode 100644 arch/arm/mach-bcmring/csp/tmr/tmrHw.c
 create mode 100644 arch/arm/mach-bcmring/include/csp/tmrHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h

diff --git a/arch/arm/mach-bcmring/csp/tmr/Makefile b/arch/arm/mach-bcmring/csp/tmr/Makefile
new file mode 100644
index 00000000000..244a61ab769
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/Makefile
@@ -0,0 +1 @@
+obj-y += tmrHw.o
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
new file mode 100644
index 00000000000..5c1c9a0e5ed
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -0,0 +1,576 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw.c
+*
+*  @brief   Low level Timer driver routines
+*
+*  @note
+*
+*   These routines provide basic timer functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+
+#include <csp/tmrHw.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define tmrHw_ASSERT(a)                     if (!(a)) *(char *)0 = 0
+#define tmrHw_MILLISEC_PER_SEC              (1000)
+
+#define tmrHw_LOW_1_RESOLUTION_COUNT        (tmrHw_LOW_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_LOW_1_MAX_MILLISEC            (0xFFFFFFFF / tmrHw_LOW_1_RESOLUTION_COUNT)
+#define tmrHw_LOW_16_RESOLUTION_COUNT       (tmrHw_LOW_1_RESOLUTION_COUNT / 16)
+#define tmrHw_LOW_16_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_LOW_16_RESOLUTION_COUNT)
+#define tmrHw_LOW_256_RESOLUTION_COUNT      (tmrHw_LOW_1_RESOLUTION_COUNT / 256)
+#define tmrHw_LOW_256_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_LOW_256_RESOLUTION_COUNT)
+
+#define tmrHw_HIGH_1_RESOLUTION_COUNT       (tmrHw_HIGH_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_HIGH_1_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_HIGH_1_RESOLUTION_COUNT)
+#define tmrHw_HIGH_16_RESOLUTION_COUNT      (tmrHw_HIGH_1_RESOLUTION_COUNT / 16)
+#define tmrHw_HIGH_16_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_HIGH_16_RESOLUTION_COUNT)
+#define tmrHw_HIGH_256_RESOLUTION_COUNT     (tmrHw_HIGH_1_RESOLUTION_COUNT / 256)
+#define tmrHw_HIGH_256_MAX_MILLISEC         (0xFFFFFFFF / tmrHw_HIGH_256_RESOLUTION_COUNT)
+
+static void ResetTimer(tmrHw_ID_t timerId)
+    __attribute__ ((section(".aramtext")));
+static int tmrHw_divide(int num, int denom)
+    __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Get timer capability
+*
+*  This function returns various capabilities/attributes of a timer
+*
+*  @return  Capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
+) {
+	switch (capability) {
+	case tmrHw_CAPABILITY_CLOCK:
+		return (timerId <=
+			1) ? tmrHw_LOW_RESOLUTION_CLOCK :
+		    tmrHw_HIGH_RESOLUTION_CLOCK;
+	case tmrHw_CAPABILITY_RESOLUTION:
+		return 32;
+	default:
+		return 0;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Resets a timer
+*
+*  This function initializes  timer
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+static void ResetTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer Id */
+) {
+	/* Reset timer */
+	pTmrHw[timerId].LoadValue = 0;
+	pTmrHw[timerId].CurrentValue = 0xFFFFFFFF;
+	pTmrHw[timerId].Control = 0;
+	pTmrHw[timerId].BackgroundLoad = 0;
+	/* Always configure as a 32 bit timer */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_32BIT;
+	/* Clear interrupt only if raw status interrupt is set */
+	if (pTmrHw[timerId].RawInterruptStatus) {
+		pTmrHw[timerId].InterruptClear = 0xFFFFFFFF;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Sets counter value for an interval in ms
+*
+*  @return   On success: Effective counter value set
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+static tmrHw_INTERVAL_t SetTimerPeriod(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	uint32_t scale = 0;
+	uint32_t count = 0;
+
+	if (timerId == 0 || timerId == 1) {
+		if (msec <= tmrHw_LOW_1_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+			scale = tmrHw_LOW_1_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_LOW_16_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+			scale = tmrHw_LOW_16_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_LOW_256_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+			scale = tmrHw_LOW_256_RESOLUTION_COUNT;
+		} else {
+			return 0;
+		}
+
+		count = msec * scale;
+		/* Set counter value */
+		pTmrHw[timerId].LoadValue = count;
+		pTmrHw[timerId].BackgroundLoad = count;
+
+	} else if (timerId == 2 || timerId == 3) {
+		if (msec <= tmrHw_HIGH_1_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+			scale = tmrHw_HIGH_1_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_HIGH_16_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+			scale = tmrHw_HIGH_16_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_HIGH_256_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+			scale = tmrHw_HIGH_256_RESOLUTION_COUNT;
+		} else {
+			return 0;
+		}
+
+		count = msec * scale;
+		/* Set counter value */
+		pTmrHw[timerId].LoadValue = count;
+		pTmrHw[timerId].BackgroundLoad = count;
+	}
+	return count / scale;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer in terms of timer interrupt rate
+*
+*  This function initializes a periodic timer to generate specific number of
+*  timer interrupt per second
+*
+*  @return   On success: Effective timer frequency
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
+) {
+	uint32_t resolution = 0;
+	uint32_t count = 0;
+	ResetTimer(timerId);
+
+	/* Set timer mode periodic */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+	/* Set timer in highest resolution */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+
+	if (rate && (timerId == 0 || timerId == 1)) {
+		if (rate > tmrHw_LOW_RESOLUTION_CLOCK) {
+			return 0;
+		}
+		resolution = tmrHw_LOW_RESOLUTION_CLOCK;
+	} else if (rate && (timerId == 2 || timerId == 3)) {
+		if (rate > tmrHw_HIGH_RESOLUTION_CLOCK) {
+			return 0;
+		} else {
+			resolution = tmrHw_HIGH_RESOLUTION_CLOCK;
+		}
+	} else {
+		return 0;
+	}
+	/* Find the counter value */
+	count = resolution / rate;
+	/* Set counter value */
+	pTmrHw[timerId].LoadValue = count;
+	pTmrHw[timerId].BackgroundLoad = count;
+
+	return resolution / count;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt after
+*           certain time interval
+*
+*  This function initializes a periodic timer to generate timer interrupt
+*  after every time interval in millisecond
+*
+*  @return   On success: Effective interval set in milli-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	ResetTimer(timerId);
+
+	/* Set timer mode periodic */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+	return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt just once
+*           after certain time interval
+*
+*  This function initializes a periodic timer to generate a single ticks after
+*  certain time interval in millisecond
+*
+*  @return   On success: Effective interval set in milli-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	ResetTimer(timerId);
+
+	/* Set timer mode oneshot */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_ONESHOT;
+
+	return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a timer to run as a free running timer
+*
+*  This function initializes a timer to run as a free running timer
+*
+*  @return   Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
+) {
+	uint32_t scale = 0;
+
+	ResetTimer(timerId);
+	/* Set timer as free running mode */
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+	if (divider >= 64) {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+		scale = 256;
+	} else if (divider >= 8) {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+		scale = 16;
+	} else {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+		scale = 1;
+	}
+
+	if (timerId == 0 || timerId == 1) {
+		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, scale);
+	} else if (timerId == 2 || timerId == 3) {
+		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, scale);
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Starts a timer
+*
+*  This function starts a preconfigured timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_TIMER_ENABLE;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Stops a timer
+*
+*  This function stops a running timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_TIMER_ENABLE;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets current timer count
+*
+*  This function returns the current timer value
+*
+*  @return  Current downcounting timer value
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	/* return 32 bit timer value */
+	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_MODE_MASK) {
+	case tmrHw_CONTROL_FREE_RUNNING:
+		if (pTmrHw[timerId].CurrentValue) {
+			return tmrHw_MAX_COUNT - pTmrHw[timerId].CurrentValue;
+		}
+		break;
+	case tmrHw_CONTROL_PERIODIC:
+	case tmrHw_CONTROL_ONESHOT:
+		return pTmrHw[timerId].BackgroundLoad -
+		    pTmrHw[timerId].CurrentValue;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets timer count rate
+*
+*  This function returns the number of counts per second
+*
+*  @return  Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	uint32_t divider = 0;
+
+	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_PRESCALE_MASK) {
+	case tmrHw_CONTROL_PRESCALE_1:
+		divider = 1;
+		break;
+	case tmrHw_CONTROL_PRESCALE_16:
+		divider = 16;
+		break;
+	case tmrHw_CONTROL_PRESCALE_256:
+		divider = 256;
+		break;
+	default:
+		tmrHw_ASSERT(0);
+	}
+
+	if (timerId == 0 || timerId == 1) {
+		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, divider);
+	} else {
+		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, divider);
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables timer interrupt
+*
+*  This function enables the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables timer interrupt
+*
+*  This function disable the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the timer interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].InterruptClear = 0x1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets the interrupt status
+*
+*  This function returns timer interrupt status
+*
+*  @return   Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	if (pTmrHw[timerId].InterruptStatus) {
+		return tmrHw_INTERRUPT_STATUS_SET;
+	} else {
+		return tmrHw_INTERRUPT_STATUS_UNSET;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a timer causing interrupt
+*
+*  This functions returns a timer causing interrupt
+*
+*  @return  0xFFFFFFFF   : No timer causing an interrupt
+*           ! 0xFFFFFFFF : timer causing an interrupt
+*  @note
+*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void	/*  void */
+) {
+	int i;
+
+	for (i = 0; i < tmrHw_TIMER_NUM_COUNT; i++) {
+		if (pTmrHw[i].InterruptStatus) {
+			return i;
+		}
+	}
+
+	return 0xFFFFFFFF;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Displays specific timer registers
+*
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+) {
+	(*fpPrint) ("Displaying register contents \n\n");
+	(*fpPrint) ("Timer %d: Load value              0x%X\n", timerId,
+		    pTmrHw[timerId].LoadValue);
+	(*fpPrint) ("Timer %d: Background load value   0x%X\n", timerId,
+		    pTmrHw[timerId].BackgroundLoad);
+	(*fpPrint) ("Timer %d: Control                 0x%X\n", timerId,
+		    pTmrHw[timerId].Control);
+	(*fpPrint) ("Timer %d: Interrupt clear         0x%X\n", timerId,
+		    pTmrHw[timerId].InterruptClear);
+	(*fpPrint) ("Timer %d: Interrupt raw interrupt 0x%X\n", timerId,
+		    pTmrHw[timerId].RawInterruptStatus);
+	(*fpPrint) ("Timer %d: Interrupt status        0x%X\n", timerId,
+		    pTmrHw[timerId].InterruptStatus);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+		  unsigned long usecs /*  [ IN ] usec to delay */
+) {
+	tmrHw_RATE_t usec_tick_rate;
+	tmrHw_COUNT_t start_time;
+	tmrHw_COUNT_t delta_time;
+
+	start_time = tmrHw_GetCurrentCount(timerId);
+	usec_tick_rate = tmrHw_divide(tmrHw_getCountRate(timerId), 1000000);
+	delta_time = usecs * usec_tick_rate;
+
+	/* Busy wait */
+	while (delta_time > (tmrHw_GetCurrentCount(timerId) - start_time))
+		;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Local Divide function
+*
+*  This function does the divide
+*
+*  @return divide value
+*
+*/
+/****************************************************************************/
+static int tmrHw_divide(int num, int denom)
+{
+	int r;
+	int t = 1;
+
+	/* Shift denom and t up to the largest value to optimize algorithm */
+	/* t contains the units of each divide */
+	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
+		denom = denom << 1;
+		t = t << 1;
+	}
+
+	/* Intialize the result */
+	r = 0;
+
+	do {
+		/* Determine if there exists a positive remainder */
+		if ((num - denom) >= 0) {
+			/* Accumlate t to the result and calculate a new remainder */
+			num = num - denom;
+			r = r + t;
+		}
+		/* Continue to shift denom and shift t down to 0 */
+		denom = denom >> 1;
+		t = t >> 1;
+	} while (t != 0);
+	return r;
+}
diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/csp/tmrHw.h
new file mode 100644
index 00000000000..f1236d00cb9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/tmrHw.h
@@ -0,0 +1,263 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw.h
+*
+*  @brief   API definitions for low level Timer driver
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_H
+#define _TMRHW_H
+
+#include <csp/stdint.h>
+
+typedef uint32_t tmrHw_ID_t;	/* Timer ID */
+typedef uint32_t tmrHw_COUNT_t;	/* Timer count */
+typedef uint32_t tmrHw_INTERVAL_t;	/* Timer interval */
+typedef uint32_t tmrHw_RATE_t;	/* Timer event (count/interrupt) rate */
+
+typedef enum {
+	tmrHw_INTERRUPT_STATUS_SET,	/* Interrupted  */
+	tmrHw_INTERRUPT_STATUS_UNSET	/* No Interrupt */
+} tmrHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+	tmrHw_CAPABILITY_CLOCK,	/* Clock speed in HHz */
+	tmrHw_CAPABILITY_RESOLUTION	/* Timer resolution in bits */
+} tmrHw_CAPABILITY_e;
+
+/****************************************************************************/
+/**
+*  @brief   Get timer capability
+*
+*  This function returns various capabilities/attributes of a timer
+*
+*  @return  Numeric capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer in terms of timer interrupt rate
+*
+*  This function initializes a periodic timer to generate specific number of
+*  timer interrupt per second
+*
+*  @return   On success: Effective timer frequency
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt after
+*           certain time interval
+*
+*  This function initializes a periodic timer to generate timer interrupt
+*  after every time interval in milisecond
+*
+*  @return   On success: Effective interval set in mili-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt just once
+*           after certain time interval
+*
+*  This function initializes a periodic timer to generate a single ticks after
+*  certain time interval in milisecond
+*
+*  @return   On success: Effective interval set in mili-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a timer to run as a free running timer
+*
+*  This function initializes a timer to run as a free running timer
+*
+*  @return   Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Starts a timer
+*
+*  This function starts a preconfigured timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Stops a timer
+*
+*  This function stops a running timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Gets current timer count
+*
+*  This function returns the current timer value
+*
+*  @return  Current downcounting timer value
+*
+*/
+/****************************************************************************/
+tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Gets timer count rate
+*
+*  This function returns the number of counts per second
+*
+*  @return  Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Enables timer interrupt
+*
+*  This function enables the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Disables timer interrupt
+*
+*  This function disable the timer interrupt
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the timer interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Gets the interrupt status
+*
+*  This function returns timer interrupt status
+*
+*  @return   Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a timer causing interrupt
+*
+*  This functions returns a timer causing interrupt
+*
+*  @return  0xFFFFFFFF   : No timer causing an interrupt
+*           ! 0xFFFFFFFF : timer causing an interrupt
+*  @note
+*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+*  @brief   Displays specific timer registers
+*
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+		  unsigned long usecs	/*  [ IN ] usec to delay */
+) __attribute__ ((section(".aramtext")));
+
+#endif /* _TMRHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
new file mode 100644
index 00000000000..3080ac7239a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
@@ -0,0 +1,82 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw_reg.h
+*
+*  @brief   Definitions for low level Timer registers
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_REG_H
+#define _TMRHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <mach/csp/hw_cfg.h>
+/* Base address */
+#define tmrHw_MODULE_BASE_ADDR          MM_IO_BASE_TMR
+
+/*
+This platform has four different timers running at different clock speed
+
+Timer one   (Timer ID 0) runs at  25 MHz
+Timer two   (Timer ID 1) runs at  25 MHz
+Timer three (Timer ID 2) runs at 150 MHz
+Timer four  (Timer ID 3) runs at 150 MHz
+*/
+#define tmrHw_LOW_FREQUENCY_MHZ         25	/* Always 25MHz from XTAL */
+#define tmrHw_LOW_FREQUENCY_HZ          25000000
+
+#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107)
+#define tmrHw_HIGH_FREQUENCY_MHZ        150	/* Always 150MHz for FPGA */
+#define tmrHw_HIGH_FREQUENCY_HZ         150000000
+#else
+#define tmrHw_HIGH_FREQUENCY_HZ         HW_CFG_BUS_CLK_HZ
+#define tmrHw_HIGH_FREQUENCY_MHZ        (HW_CFG_BUS_CLK_HZ / 1000000)
+#endif
+
+#define tmrHw_LOW_RESOLUTION_CLOCK      tmrHw_LOW_FREQUENCY_HZ
+#define tmrHw_HIGH_RESOLUTION_CLOCK     tmrHw_HIGH_FREQUENCY_HZ
+#define tmrHw_MAX_COUNT                 (0xFFFFFFFF)	/* maximum number of count a timer can count */
+#define tmrHw_TIMER_NUM_COUNT           (4)	/* Number of timer module supported */
+
+typedef struct {
+	uint32_t LoadValue;	/* Load value for timer */
+	uint32_t CurrentValue;	/* Current value for timer */
+	uint32_t Control;	/* Control register */
+	uint32_t InterruptClear;	/* Interrupt clear register */
+	uint32_t RawInterruptStatus;	/* Raw interrupt status */
+	uint32_t InterruptStatus;	/* Masked interrupt status */
+	uint32_t BackgroundLoad;	/* Background load value */
+	uint32_t padding;	/* Padding register */
+} tmrHw_REG_t;
+
+/* Control bot masks */
+#define tmrHw_CONTROL_TIMER_ENABLE            0x00000080
+#define tmrHw_CONTROL_PERIODIC                0x00000040
+#define tmrHw_CONTROL_INTERRUPT_ENABLE        0x00000020
+#define tmrHw_CONTROL_PRESCALE_MASK           0x0000000C
+#define tmrHw_CONTROL_PRESCALE_1              0x00000000
+#define tmrHw_CONTROL_PRESCALE_16             0x00000004
+#define tmrHw_CONTROL_PRESCALE_256            0x00000008
+#define tmrHw_CONTROL_32BIT                   0x00000002
+#define tmrHw_CONTROL_ONESHOT                 0x00000001
+#define tmrHw_CONTROL_FREE_RUNNING            0x00000000
+
+#define tmrHw_CONTROL_MODE_MASK               (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT)
+
+#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR)
+
+#endif /* _TMRHW_REG_H */
-- 
GitLab


From a364143127a3155153f3e93d47cfc0f99a6f1858 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:10:24 +0100
Subject: [PATCH 223/257] ARM: 5661/1: bcmring: add csp security hardware
 headers

add csp security hardware headers

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/secHw.h     |  65 ++++++++++++
 .../mach-bcmring/include/mach/csp/secHw_def.h | 100 ++++++++++++++++++
 .../include/mach/csp/secHw_inline.h           |  79 ++++++++++++++
 3 files changed, 244 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/secHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h

diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h
new file mode 100644
index 00000000000..b9d7e0732df
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/secHw.h
@@ -0,0 +1,65 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw.h
+*
+*  @brief   Definitions for accessing low level security features
+*
+*/
+/****************************************************************************/
+#ifndef SECHW_H
+#define SECHW_H
+
+typedef void (*secHw_FUNC_t) (void);
+
+typedef enum {
+	secHw_MODE_SECURE = 0x0,	/* Switches processor into secure mode */
+	secHw_MODE_NONSECURE = 0x1	/* Switches processor into non-secure mode */
+} secHw_MODE;
+
+/****************************************************************************/
+/**
+*  @brief   Requesting to execute the function in secure mode
+*
+*  This function requests the given function to run in secure mode
+*
+*/
+/****************************************************************************/
+void secHw_RunSecure(secHw_FUNC_t	/* Function to run in secure mode */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Sets the  mode
+*
+*  his function sets the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_SetMode(secHw_MODE	/* Processor mode */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Get the current mode
+*
+*  This function retieves the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_GetMode(secHw_MODE *);
+
+#endif /* SECHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
new file mode 100644
index 00000000000..d15f5f3ec2d
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
@@ -0,0 +1,100 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw_def.h
+*
+*  @brief   Definitions for configuring/testing secure blocks
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_DEF_H
+#define SECHW_DEF_H
+
+#include <mach/csp/mm_io.h>
+
+/* Bit mask for various secure device */
+#define secHw_BLK_MASK_CHIP_CONTROL     0x00000001
+#define secHw_BLK_MASK_KEY_SCAN         0x00000002
+#define secHw_BLK_MASK_TOUCH_SCREEN     0x00000004
+#define secHw_BLK_MASK_UART0            0x00000008
+#define secHw_BLK_MASK_UART1            0x00000010
+#define secHw_BLK_MASK_WATCHDOG         0x00000020
+#define secHw_BLK_MASK_SPUM             0x00000040
+#define secHw_BLK_MASK_DDR2             0x00000080
+#define secHw_BLK_MASK_EXT_MEM          0x00000100
+#define secHw_BLK_MASK_ESW              0x00000200
+#define secHw_BLK_MASK_SPU              0x00010000
+#define secHw_BLK_MASK_PKA              0x00020000
+#define secHw_BLK_MASK_RNG              0x00040000
+#define secHw_BLK_MASK_RTC              0x00080000
+#define secHw_BLK_MASK_OTP              0x00100000
+#define secHw_BLK_MASK_BOOT             0x00200000
+#define secHw_BLK_MASK_MPU              0x00400000
+#define secHw_BLK_MASK_TZCTRL           0x00800000
+#define secHw_BLK_MASK_INTR             0x01000000
+
+/* Trustzone register set */
+typedef struct {
+	volatile uint32_t status;	/* read only - reflects status of writes of 2 write registers */
+	volatile uint32_t setUnsecure;	/* write only. reads back as 0 */
+	volatile uint32_t setSecure;	/* write only. reads back as 0 */
+} secHw_TZREG_t;
+
+/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */
+/* is for the higher 16 bits. */
+
+typedef enum {
+	secHw_IDX_LS = 0,
+	secHw_IDX_MS = 1,
+	secHw_IDX_NUM
+} secHw_IDX_e;
+
+typedef struct {
+	volatile secHw_TZREG_t reg[secHw_IDX_NUM];
+} secHw_REGS_t;
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void);
+
+#include <mach/csp/secHw_inline.h>
+
+#endif /* SECHW_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
new file mode 100644
index 00000000000..9cd6a032ab7
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
@@ -0,0 +1,79 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw_inline.h
+*
+*  @brief   Definitions for configuring/testing secure blocks
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_INLINE_H
+#define SECHW_INLINE_H
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    ) {
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	if (mask & 0x0000FFFF) {
+		regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
+	}
+
+	if (mask & 0xFFFF0000) {
+		regp->reg[secHw_IDX_MS].setSecure = mask >> 16;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    ) {
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	if (mask & 0x0000FFFF) {
+		regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
+	}
+	if (mask & 0xFFFF0000) {
+		regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void)
+{
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	return (regp->reg[1].status << 16) + regp->reg[0].status;
+}
+
+#endif /* SECHW_INLINE_H */
-- 
GitLab


From bc5739005f9c0585d21c78f61e9d7965f97b2109 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:04:17 +0100
Subject: [PATCH 224/257] ARM: 5653/1: bcmring: add Makefile of csp code

add Makefile of csp code

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/Makefile | 3 +++
 1 file changed, 3 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/Makefile

diff --git a/arch/arm/mach-bcmring/csp/Makefile b/arch/arm/mach-bcmring/csp/Makefile
new file mode 100644
index 00000000000..648c0377530
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/Makefile
@@ -0,0 +1,3 @@
+obj-y += dmac/
+obj-y += tmr/
+obj-y += chipc/
-- 
GitLab


From 831f1f73a6e1a0a02a5eaa2da5f49cf09c7bb1af Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:46:49 +0100
Subject: [PATCH 225/257] ARM: 5642/1: bcmring: add
 Makefile/Kconfig/Makefile.boot in mach-bcmring

add arch/arm/mach-bcmring directory

add Kconfig, Makefile, and Makefile.boot in mach-bcmring

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/Kconfig       | 21 +++++++++++++++++++++
 arch/arm/mach-bcmring/Makefile      |  8 ++++++++
 arch/arm/mach-bcmring/Makefile.boot |  6 ++++++
 3 files changed, 35 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/Kconfig
 create mode 100644 arch/arm/mach-bcmring/Makefile
 create mode 100644 arch/arm/mach-bcmring/Makefile.boot

diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig
new file mode 100644
index 00000000000..457b4384913
--- /dev/null
+++ b/arch/arm/mach-bcmring/Kconfig
@@ -0,0 +1,21 @@
+choice
+	prompt "Processor selection in BCMRING family of devices"
+	depends on ARCH_BCMRING
+	default ARCH_BCM11107
+
+config ARCH_FPGA11107
+	bool "FPGA11107"
+
+config ARCH_BCM11107
+	bool "BCM11107"
+endchoice
+
+menu "BCMRING Options"
+	depends on ARCH_BCMRING
+
+config BCM_ZRELADDR
+	hex "Compressed ZREL ADDR"
+
+endmenu
+
+# source "drivers/char/bcmring/Kconfig"
diff --git a/arch/arm/mach-bcmring/Makefile b/arch/arm/mach-bcmring/Makefile
new file mode 100644
index 00000000000..f8d9fcedf91
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o
+obj-y += csp/
diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot
new file mode 100644
index 00000000000..fb53b283beb
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile.boot
@@ -0,0 +1,6 @@
+# Address where decompressor will be written and eventually executed.
+#
+# default to SDRAM
+zreladdr-y      := $(CONFIG_BCM_ZRELADDR)
+params_phys-y   := 0x00000800
+
-- 
GitLab


From 6288e28dce9bae24068b7341ebd72a7d176a3539 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:46:15 +0100
Subject: [PATCH 226/257] ARM: 5641/1: bcmring: add Kconfig and Makefile
 entries in arch/arm

add bcmring option in Kconfig and add entry in Makefile
in arch/arm directory

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig  | 14 ++++++++++++++
 arch/arm/Makefile |  1 +
 2 files changed, 15 insertions(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..c6d2b198875 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -637,6 +637,18 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
+config ARCH_BCMRING
+	bool "Broadcom BCMRING"
+	depends on MMU
+	select CPU_V6
+	select ARM_AMBA
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	help
+	  Support for Broadcom's BCMRing platform.
+
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -730,6 +742,8 @@ source "arch/arm/mach-u300/Kconfig"
 
 source "arch/arm/mach-w90x900/Kconfig"
 
+source "arch/arm/mach-bcmring/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..b9ae98b88a7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -112,6 +112,7 @@ endif
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_AAEC2000)		:= aaec2000
 machine-$(CONFIG_ARCH_AT91)		:= at91
+machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
 machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
 machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
 machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
-- 
GitLab


From 7f33527f547161f5ddc05c252c81617b8de93f21 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Wed, 12 Aug 2009 22:07:26 +0100
Subject: [PATCH 227/257] ARM: 5670/1: bcmring: add default configuration for
 bcmring arch

add default configuration for bcmring arch

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/bcmring_defconfig | 725 +++++++++++++++++++++++++++++
 1 file changed, 725 insertions(+)
 create mode 100644 arch/arm/configs/bcmring_defconfig

diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
new file mode 100644
index 00000000000..bcc0bac551a
--- /dev/null
+++ b/arch/arm/configs/bcmring_defconfig
@@ -0,0 +1,725 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Fri Jul 17 12:07:28 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_BCMRING=y
+# CONFIG_ARCH_FPGA11107 is not set
+CONFIG_ARCH_BCM11107=y
+
+#
+# BCMRING Options
+#
+CONFIG_BCM_ZRELADDR=0x8000
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0e000000
+CONFIG_ZBOOT_ROM_BSS=0x0ea00000
+CONFIG_ZBOOT_ROM=y
+CONFIG_CMDLINE=""
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_INET is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_BCM_UMI=y
+CONFIG_MTD_NAND_BCM_UMI_HWCS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=64
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_FSNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+# CONFIG_JFFS2_FS_SECURITY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From 57a473f2f97cf3bca78df08aac2f438ddef03bee Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Wed, 12 Aug 2009 22:08:48 +0100
Subject: [PATCH 228/257] ARM: 5671/1: bcmring: add maintainer entry

add maintainer entry

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 MAINTAINERS | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index fa2a16def17..a67a99857e2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -603,6 +603,23 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://maxim.org.za/at91_26.html
 S:	Maintained
 
+ARM/BCMRING ARM ARCHITECTURE
+P:	Leo Chen <leochen@broadcom.com>
+P:	Scott Branden <sbranden@broadcom.com>
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S:	Maintained
+F:	arch/arm/mach-bcmring
+
+ARM/BCMRING MTD NAND DRIVER
+P:	Leo Chen <leochen@broadcom.com>
+P:	Scott Branden <sbranden@broadcom.com>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/nand/bcm_umi_nand.c
+F:	drivers/mtd/nand/bcm_umi_bch.c
+F:	drivers/mtd/nand/bcm_umi_hamming.c
+F:	drivers/mtd/nand/nand_bcm_umi.h
+
 ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
 P:	Lennert Buytenhek
 M:	kernel@wantstofly.org
-- 
GitLab


From ff54b4578448d616eb177e216acd599ecf5ee5b1 Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:39:49 +0900
Subject: [PATCH 229/257] ARM: S5PC100: Memory map

S5PC100's the physical IO space starts at 0xe000"0000. To maximize space for
vmalloc, the virtual IO space starts at 0xf400"0000 as same as other samsung
CPUs(s3c24xx and s3c64xx) do.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject and description fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/include/mach/map.h    | 75 +++++++++++++++++++++
 arch/arm/mach-s5pc100/include/mach/memory.h | 18 +++++
 2 files changed, 93 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/include/mach/map.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/memory.h

diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
new file mode 100644
index 00000000000..9e9f39130b2
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -0,0 +1,75 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/map.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/map.h
+ *
+ * S5PC1XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+
+/* Chip ID */
+#define S5PC100_PA_CHIPID	(0xE0000000)
+#define S5PC1XX_PA_CHIPID	S5PC100_PA_CHIPID
+#define S5PC1XX_VA_CHIPID	S3C_VA_SYS
+
+/* System */
+#define S5PC100_PA_SYS		(0xE0100000)
+#define S5PC100_PA_CLK		(S5PC100_PA_SYS + 0x0)
+#define S5PC100_PA_PWR		(S5PC100_PA_SYS + 0x8000)
+#define S5PC1XX_PA_CLK		S5PC100_PA_CLK
+#define S5PC1XX_PA_PWR		S5PC100_PA_PWR
+#define S5PC1XX_VA_CLK		(S3C_VA_SYS + 0x10000)
+#define S5PC1XX_VA_PWR		(S3C_VA_SYS + 0x20000)
+
+/* Interrupt */
+#define S5PC100_PA_VIC		(0xE4000000)
+#define S5PC100_VA_VIC		S3C_VA_IRQ
+#define S5PC100_PA_VIC_OFFSET	0x100000
+#define S5PC100_VA_VIC_OFFSET	0x10000
+#define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
+#define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+
+/* Timer */
+#define S5PC100_PA_TIMER	(0xEA000000)
+#define S5PC1XX_PA_TIMER	S5PC100_PA_TIMER
+#define S5PC1XX_VA_TIMER	S3C_VA_TIMER
+
+/* UART */
+#define S5PC100_PA_UART		(0xEC000000)
+#define S5PC1XX_PA_UART		S5PC100_PA_UART
+#define S5PC1XX_VA_UART		S3C_VA_UART
+
+/* IIC */
+#define S5PC100_PA_IIC		(0xEC100000)
+
+/* ETC */
+#define S5PC100_PA_SDRAM	(0x20000000)
+
+/* compatibility defines. */
+#define S3C_PA_UART		S5PC100_PA_UART
+#define S3C_PA_UART0		(S5PC100_PA_UART + 0x0)
+#define S3C_PA_UART1		(S5PC100_PA_UART + 0x400)
+#define S3C_PA_UART2		(S5PC100_PA_UART + 0x800)
+#define S3C_PA_UART3		(S5PC100_PA_UART + 0xC00)
+#define S3C_VA_UART0		(S3C_VA_UART + 0x0)
+#define S3C_VA_UART1		(S3C_VA_UART + 0x400)
+#define S3C_VA_UART2		(S3C_VA_UART + 0x800)
+#define S3C_VA_UART3		(S3C_VA_UART + 0xC00)
+#define S3C_UART_OFFSET		0x400
+#define S3C_VA_VIC0		(S3C_VA_IRQ + 0x0)
+#define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
+#define S3C_VA_VIC2		(S3C_VA_IRQ + 0x20000)
+#define S3C_PA_IIC		S5PC100_PA_IIC
+
+#endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
new file mode 100644
index 00000000000..4b60d18179f
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/memory.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pc100/include/mach/memory.h
+ *
+ * Copyright 2008 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET     	UL(0x20000000)
+
+#endif
-- 
GitLab


From 433a915fc6456ee3a4b740fe4d92caa78164fdce Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:09 +0900
Subject: [PATCH 230/257] ARM: S5PC100: UART and Serial

Serial driver of S5PC100 is the same as S3C6400, so S5PC100 shares the serial
driver with S3C6400. Uart driver is copied from plat-s3c64xx to plat-s5pc1xx,
as I do not use plat-s3c64xx directory.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: title fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s5pc1xx/dev-uart.c | 174 +++++++++++++++++++++++++++++++
 drivers/serial/Kconfig           |   9 +-
 drivers/serial/Makefile          |   1 +
 3 files changed, 183 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/plat-s5pc1xx/dev-uart.c

diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
new file mode 100644
index 00000000000..f749bc5407b
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -0,0 +1,174 @@
+/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on plat-s3c64xx/dev-uart.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s5pc1xx_uart0_resource[] = {
+	[0] = {
+		.start	= S3C_PA_UART0,
+		.end	= S3C_PA_UART0 + 0x100,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX0,
+		.end	= IRQ_S3CUART_RX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX0,
+		.end	= IRQ_S3CUART_TX0,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR0,
+		.end	= IRQ_S3CUART_ERR0,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s5pc1xx_uart1_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART1,
+		.end   = S3C_PA_UART1 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX1,
+		.end	= IRQ_S3CUART_RX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX1,
+		.end	= IRQ_S3CUART_TX1,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR1,
+		.end	= IRQ_S3CUART_ERR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5pc1xx_uart2_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART2,
+		.end   = S3C_PA_UART2 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX2,
+		.end	= IRQ_S3CUART_RX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX2,
+		.end	= IRQ_S3CUART_TX2,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR2,
+		.end	= IRQ_S3CUART_ERR2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5pc1xx_uart3_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART3,
+		.end   = S3C_PA_UART3 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX3,
+		.end	= IRQ_S3CUART_RX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX3,
+		.end	= IRQ_S3CUART_TX3,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR3,
+		.end	= IRQ_S3CUART_ERR3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s5pc1xx_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart0_resource),
+	},
+	[1] = {
+		.resources	= s5pc1xx_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart1_resource),
+	},
+	[2] = {
+		.resources	= s5pc1xx_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart2_resource),
+	},
+	[3] = {
+		.resources	= s5pc1xx_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart3_resource),
+	},
+};
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+	.id		= 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+	.id		= 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+	.id		= 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+	.id		= 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+	&s3c24xx_uart_device0,
+	&s3c24xx_uart_device1,
+	&s3c24xx_uart_device2,
+	&s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
+
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 037c1e0b7c4..cdd552d33a7 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -459,7 +459,7 @@ config SERIAL_SAMSUNG_UARTS
 	int
 	depends on ARM && PLAT_S3C
 	default 2 if ARCH_S3C2400
-	default 4 if ARCH_S3C64XX || CPU_S3C2443
+	default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
 	default 3
 	help
 	  Select the number of available UART ports for the Samsung S3C
@@ -533,6 +533,13 @@ config SERIAL_S3C6400
 	  Serial port support for the Samsung S3C6400 and S3C6410
 	  SoCs
 
+config SERIAL_S5PC100
+	tristate "Samsung S5PC100 Serial port support"
+	depends on SERIAL_SAMSUNG && CPU_S5PC100
+	default y
+	help
+	  Serial port support for the Samsung S5PC100 SoCs
+
 config SERIAL_MAX3100
 	tristate "MAX3100 support"
 	depends on SPI
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d5a29981c6c..97f6fcc8b43 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
 obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
 obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
 obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
+obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
-- 
GitLab


From 8acd1ade2ede18408303c968e1449220c427a182 Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:15 +0900
Subject: [PATCH 231/257] ARM: S5PC100: CPU initialization

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/cpu.c                   |  97 +++++++++++++++
 .../mach-s5pc100/include/mach/debug-macro.S   |  38 ++++++
 .../mach-s5pc100/include/mach/entry-macro.S   |  50 ++++++++
 arch/arm/mach-s5pc100/include/mach/hardware.h |  14 +++
 arch/arm/mach-s5pc100/include/mach/system.h   |  24 ++++
 .../mach-s5pc100/include/mach/uncompress.h    |  28 +++++
 arch/arm/plat-s5pc1xx/cpu.c                   | 112 ++++++++++++++++++
 arch/arm/plat-s5pc1xx/include/plat/s5pc100.h  |  65 ++++++++++
 arch/arm/plat-s5pc1xx/s5pc100-init.c          |  27 +++++
 9 files changed, 455 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/cpu.c
 create mode 100644 arch/arm/mach-s5pc100/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-s5pc100/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-s5pc100/include/mach/hardware.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/system.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/uncompress.h
 create mode 100644 arch/arm/plat-s5pc1xx/cpu.c
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
 create mode 100644 arch/arm/plat-s5pc1xx/s5pc100-init.c

diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
new file mode 100644
index 00000000000..0e718890da3
--- /dev/null
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -0,0 +1,97 @@
+/* linux/arch/arm/mach-s5pc100/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6410/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s5pc100.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pc100_iodesc[] __initdata = {
+};
+
+/* s5pc100_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pc100_map_io(void)
+{
+	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+
+	/* initialise device information early */
+}
+
+void __init s5pc100_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	s3c24xx_register_baseclocks(xtal);
+	s5pc1xx_register_clocks();
+	s5pc100_register_clocks();
+	s5pc100_setup_clocks();
+}
+
+void __init s5pc100_init_irq(void)
+{
+	u32 vic_valid[] = {~0, ~0, ~0};
+
+	/* VIC0, VIC1, and VIC2 are fully populated. */
+	s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
+}
+
+struct sysdev_class s5pc100_sysclass = {
+	.name	= "s5pc100-core",
+};
+
+static struct sys_device s5pc100_sysdev = {
+	.cls	= &s5pc100_sysclass,
+};
+
+static int __init s5pc100_core_init(void)
+{
+	return sysdev_class_register(&s5pc100_sysclass);
+}
+
+core_initcall(s5pc100_core_init);
+
+int __init s5pc100_init(void)
+{
+	printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+
+	return sysdev_register(&s5pc100_sysdev);
+}
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
new file mode 100644
index 00000000000..9d142ccf654
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ *
+ * Based on mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
new file mode 100644
index 00000000000..67131939e62
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -0,0 +1,50 @@
+/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for the Samsung S5PC1XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =S3C_VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, # S3C_IRQ_OFFSET + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic2
+	addeq	\tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
new file mode 100644
index 00000000000..38ce8206a1a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S3C6400 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
new file mode 100644
index 00000000000..e3901437547
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/system.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - system implementation
+ *
+ * Based on mach-s3c6400/include/mach/system.h
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/uncompress.h b/arch/arm/mach-s5pc100/include/mach/uncompress.h
new file mode 100644
index 00000000000..01ccf535e76
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/uncompress.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s5pc100/include/mach/uncompress.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - uncompress code
+ *
+ * Based on mach-s3c6400/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+	fifo_mask = S3C2440_UFSTAT_TXMASK;
+	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
new file mode 100644
index 00000000000..715a7330794
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -0,0 +1,112 @@
+/* linux/arch/arm/plat-s5pc1xx/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX CPU Support
+ *
+ * Based on plat-s3c64xx/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/s5pc100.h>
+
+/* table of supported CPUs */
+
+static const char name_s5pc100[] = "S5PC100";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= 0x43100000,
+		.idmask		= 0xfffff000,
+		.map_io		= s5pc100_map_io,
+		.init_clocks	= s5pc100_init_clocks,
+		.init_uarts	= s5pc100_init_uarts,
+		.init		= s5pc100_init,
+		.name		= name_s5pc100,
+	},
+};
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xffff)
+
+static struct map_desc s5pc1xx_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5PC1XX_VA_CHIPID,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_CHIPID),
+		.length		= SZ_16,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_CLK,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_PWR,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_PWR),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)(S5PC1XX_VA_UART),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(0),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(0)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(1),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(1)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(2),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(2)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_TIMER,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_TIMER),
+		.length		= SZ_256,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* read cpu identification code */
+
+void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
+{
+	unsigned long idcode;
+
+	/* initialise the io descriptors we need for initialisation */
+	iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
+	iotable_init(mach_desc, size);
+
+	idcode = __raw_readl(S5PC1XX_VA_CHIPID);
+	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
new file mode 100644
index 00000000000..45e27513166
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -0,0 +1,65 @@
+/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * Based on plat-s3c64xx/include/plat/s3c6400.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+extern  int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern  int s5pc100_register_baseclocks(unsigned long xtal);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+extern struct sysdev_class s5pc100_sysclass;
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
+extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
+extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
+extern struct clk clk_hpll;
+extern struct clk clk_hd0;
+extern struct clk clk_pd0;
+extern struct clk clk_54m;
+extern struct clk clk_dout_mpll2;
+extern void s5pc1xx_register_clocks(void);
+extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
+extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
+extern struct platform_device s3c_device_g2d;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_vpp;
+extern struct platform_device s3c_device_tvenc;
+extern struct platform_device s3c_device_tvscaler;
+extern struct platform_device s3c_device_rotator;
+extern struct platform_device s3c_device_jpeg;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c_device_usb_otghcd;
+extern struct platform_device s3c_device_keypad;
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_smc911x;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_mfc;
+extern struct platform_device s3c_device_ac97;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_fimc2;
+
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/plat-s5pc1xx/s5pc100-init.c
new file mode 100644
index 00000000000..c58710884ce
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-init.c
@@ -0,0 +1,27 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - CPU initialisation (common with other S5PC1XX chips)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* uart registration process */
+
+void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	/* The driver name is s3c6400-uart to reuse s3c6400_serial_drv  */
+	s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
+}
-- 
GitLab


From 0164cbf4390fbcd7125fc8d476a451a3efa14c5d Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:22 +0900
Subject: [PATCH 232/257] ARM: S5PC100: GPIO and I2C

S5PC100 has more GPIO group then previous one. It has 34 groups of GPIO, while
S3C6410 has 17 groups. For now, only header files are written.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 .../arm/mach-s5pc100/include/mach/gpio-core.h |  21 +++
 arch/arm/mach-s5pc100/include/mach/gpio.h     | 146 ++++++++++++++++++
 arch/arm/plat-s5pc1xx/setup-i2c0.c            |  25 +++
 arch/arm/plat-s5pc1xx/setup-i2c1.c            |  25 +++
 4 files changed, 217 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/include/mach/gpio-core.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/gpio.h
 create mode 100644 arch/arm/plat-s5pc1xx/setup-i2c0.c
 create mode 100644 arch/arm/plat-s5pc1xx/setup-i2c1.c

diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
new file mode 100644
index 00000000000..ad28d8ec8a7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio-core.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO core support
+ *
+ * Based on mach-s3c6400/include/mach/gpio-core.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+/* currently we just include the platform support */
+#include <plat/gpio-core.h>
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
new file mode 100644
index 00000000000..c74fc93d7d1
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -0,0 +1,146 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO lib support
+ *
+ * Base on mach-s3c6400/include/mach/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PC1XX_GPIO_A0_NR	(8)
+#define S5PC1XX_GPIO_A1_NR	(5)
+#define S5PC1XX_GPIO_B_NR	(8)
+#define S5PC1XX_GPIO_C_NR	(5)
+#define S5PC1XX_GPIO_D_NR	(7)
+#define S5PC1XX_GPIO_E0_NR	(8)
+#define S5PC1XX_GPIO_E1_NR	(6)
+#define S5PC1XX_GPIO_F0_NR	(8)
+#define S5PC1XX_GPIO_F1_NR	(8)
+#define S5PC1XX_GPIO_F2_NR	(8)
+#define S5PC1XX_GPIO_F3_NR	(4)
+#define S5PC1XX_GPIO_G0_NR	(8)
+#define S5PC1XX_GPIO_G1_NR	(3)
+#define S5PC1XX_GPIO_G2_NR	(7)
+#define S5PC1XX_GPIO_G3_NR	(7)
+#define S5PC1XX_GPIO_H0_NR	(8)
+#define S5PC1XX_GPIO_H1_NR	(8)
+#define S5PC1XX_GPIO_H2_NR	(8)
+#define S5PC1XX_GPIO_H3_NR	(8)
+#define S5PC1XX_GPIO_I_NR	(8)
+#define S5PC1XX_GPIO_J0_NR	(8)
+#define S5PC1XX_GPIO_J1_NR	(5)
+#define S5PC1XX_GPIO_J2_NR	(8)
+#define S5PC1XX_GPIO_J3_NR	(8)
+#define S5PC1XX_GPIO_J4_NR	(4)
+#define S5PC1XX_GPIO_K0_NR	(8)
+#define S5PC1XX_GPIO_K1_NR	(6)
+#define S5PC1XX_GPIO_K2_NR	(8)
+#define S5PC1XX_GPIO_K3_NR	(8)
+#define S5PC1XX_GPIO_MP00_NR	(8)
+#define S5PC1XX_GPIO_MP01_NR	(8)
+#define S5PC1XX_GPIO_MP02_NR	(8)
+#define S5PC1XX_GPIO_MP03_NR	(8)
+#define S5PC1XX_GPIO_MP04_NR	(5)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PC1XX_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+	S5PC1XX_GPIO_A0_START 	= 0,
+	S5PC1XX_GPIO_A1_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
+	S5PC1XX_GPIO_B_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
+	S5PC1XX_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
+	S5PC1XX_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
+	S5PC1XX_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
+	S5PC1XX_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
+	S5PC1XX_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
+	S5PC1XX_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
+	S5PC1XX_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
+	S5PC1XX_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
+	S5PC1XX_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
+	S5PC1XX_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
+	S5PC1XX_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
+	S5PC1XX_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
+	S5PC1XX_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
+	S5PC1XX_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
+	S5PC1XX_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
+	S5PC1XX_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
+	S5PC1XX_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
+	S5PC1XX_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
+	S5PC1XX_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
+	S5PC1XX_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
+	S5PC1XX_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
+	S5PC1XX_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
+	S5PC1XX_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
+	S5PC1XX_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
+	S5PC1XX_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
+	S5PC1XX_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
+	S5PC1XX_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
+	S5PC1XX_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
+	S5PC1XX_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
+	S5PC1XX_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
+	S5PC1XX_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+};
+
+/* S5PC1XX GPIO number definitions. */
+#define S5PC1XX_GPA0(_nr)	(S5PC1XX_GPIO_A0_START + (_nr))
+#define S5PC1XX_GPA1(_nr)	(S5PC1XX_GPIO_A1_START + (_nr))
+#define S5PC1XX_GPB(_nr)	(S5PC1XX_GPIO_B_START + (_nr))
+#define S5PC1XX_GPC(_nr)	(S5PC1XX_GPIO_C_START + (_nr))
+#define S5PC1XX_GPD(_nr)	(S5PC1XX_GPIO_D_START + (_nr))
+#define S5PC1XX_GPE0(_nr)	(S5PC1XX_GPIO_E0_START + (_nr))
+#define S5PC1XX_GPE1(_nr)	(S5PC1XX_GPIO_E1_START + (_nr))
+#define S5PC1XX_GPF0(_nr)	(S5PC1XX_GPIO_F0_START + (_nr))
+#define S5PC1XX_GPF1(_nr)	(S5PC1XX_GPIO_F1_START + (_nr))
+#define S5PC1XX_GPF2(_nr)	(S5PC1XX_GPIO_F2_START + (_nr))
+#define S5PC1XX_GPF3(_nr)	(S5PC1XX_GPIO_F3_START + (_nr))
+#define S5PC1XX_GPG0(_nr)	(S5PC1XX_GPIO_G0_START + (_nr))
+#define S5PC1XX_GPG1(_nr)	(S5PC1XX_GPIO_G1_START + (_nr))
+#define S5PC1XX_GPG2(_nr)	(S5PC1XX_GPIO_G2_START + (_nr))
+#define S5PC1XX_GPG3(_nr)	(S5PC1XX_GPIO_G3_START + (_nr))
+#define S5PC1XX_GPH0(_nr)	(S5PC1XX_GPIO_H0_START + (_nr))
+#define S5PC1XX_GPH1(_nr)	(S5PC1XX_GPIO_H1_START + (_nr))
+#define S5PC1XX_GPH2(_nr)	(S5PC1XX_GPIO_H2_START + (_nr))
+#define S5PC1XX_GPH3(_nr)	(S5PC1XX_GPIO_H3_START + (_nr))
+#define S5PC1XX_GPI(_nr)	(S5PC1XX_GPIO_I_START + (_nr))
+#define S5PC1XX_GPJ0(_nr)	(S5PC1XX_GPIO_J0_START + (_nr))
+#define S5PC1XX_GPJ1(_nr)	(S5PC1XX_GPIO_J1_START + (_nr))
+#define S5PC1XX_GPJ2(_nr)	(S5PC1XX_GPIO_J2_START + (_nr))
+#define S5PC1XX_GPJ3(_nr)	(S5PC1XX_GPIO_J3_START + (_nr))
+#define S5PC1XX_GPJ4(_nr)	(S5PC1XX_GPIO_J4_START + (_nr))
+#define S5PC1XX_GPK0(_nr)	(S5PC1XX_GPIO_K0_START + (_nr))
+#define S5PC1XX_GPK1(_nr)	(S5PC1XX_GPIO_K1_START + (_nr))
+#define S5PC1XX_GPK2(_nr)	(S5PC1XX_GPIO_K2_START + (_nr))
+#define S5PC1XX_GPK3(_nr)	(S5PC1XX_GPIO_K3_START + (_nr))
+#define S5PC1XX_MP00(_nr)	(S5PC1XX_GPIO_MP00_START + (_nr))
+#define S5PC1XX_MP01(_nr)	(S5PC1XX_GPIO_MP01_START + (_nr))
+#define S5PC1XX_MP02(_nr)	(S5PC1XX_GPIO_MP02_START + (_nr))
+#define S5PC1XX_MP03(_nr)	(S5PC1XX_GPIO_MP03_START + (_nr))
+#define S5PC1XX_MP04(_nr)	(S5PC1XX_GPIO_MP04_START + (_nr))
+
+/* the end of the S5PC1XX specific gpios */
+#define S5PC1XX_GPIO_END	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define S3C_GPIO_END		S5PC1XX_GPIO_END
+
+/* define the number of gpios we need to the one after the MP04() range */
+#define ARCH_NR_GPIOS	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
new file mode 100644
index 00000000000..3d00c025fff
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 0 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	/* Pin configuration would be needed */
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
new file mode 100644
index 00000000000..c8f3ca42f51
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 1 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	/* Pin configuration would be needed */
+}
-- 
GitLab


From c9b870e7e796eea515a261a314917317ebb1cb4a Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:03 +0900
Subject: [PATCH 233/257] ARM: S5PC100: IRQ and timer

S5PC100 has 3 VICs(Vectored Interrupt Controller). The VICs come from S3C64xx
series, so the driver source code can be shared with S3C families. The S5PC100
has 3 VICs while S3C64xx has only 2.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/include/mach/irqs.h     |  14 +
 .../arm/mach-s5pc100/include/mach/pwm-clock.h |  56 ++++
 arch/arm/mach-s5pc100/include/mach/regs-irq.h |  24 ++
 arch/arm/mach-s5pc100/include/mach/tick.h     |  29 ++
 arch/arm/plat-s5pc1xx/include/plat/irqs.h     | 182 ++++++++++++
 arch/arm/plat-s5pc1xx/irq.c                   | 259 ++++++++++++++++++
 6 files changed, 564 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/include/mach/irqs.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/pwm-clock.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/regs-irq.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/tick.h
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/irqs.h
 create mode 100644 arch/arm/plat-s5pc1xx/irq.c

diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
new file mode 100644
index 00000000000..622720dba28
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
new file mode 100644
index 00000000000..b34d2f7aae5
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - pwm clock and timer support
+ *
+ * Based on mach-s3c6400/include/mach/pwm-clock.h
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
new file mode 100644
index 00000000000..751ac15438c
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <mach/map.h>
+#include <asm/hardware/vic.h>
+
+/* interrupt controller */
+#define S5PC1XX_VIC0REG(x)          		((x) + S5PC1XX_VA_VIC(0))
+#define S5PC1XX_VIC1REG(x)          		((x) + S5PC1XX_VA_VIC(1))
+#define S5PC1XX_VIC2REG(x)         		((x) + S5PC1XX_VA_VIC(2))
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
new file mode 100644
index 00000000000..d3de0f3591a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * Based on mach-s3c6400/include/mach/tick.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+	return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
new file mode 100644
index 00000000000..f07d8c3b25d
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Common IRQ support
+ *
+ * Based on plat-s3c64xx/include/plat/irqs.h
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
+#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET		(32)
+
+#define S3C_IRQ(x)		((x) + S3C_IRQ_OFFSET)
+
+#define S3C_VIC0_BASE		S3C_IRQ(0)
+#define S3C_VIC1_BASE		S3C_IRQ(32)
+#define S3C_VIC2_BASE		S3C_IRQ(64)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0	(16)
+#define IRQ_S3CUART_BASE1	(20)
+#define IRQ_S3CUART_BASE2	(24)
+#define IRQ_S3CUART_BASE3	(28)
+
+#define UART_IRQ_RXD		(0)
+#define UART_IRQ_ERR		(1)
+#define UART_IRQ_TXD		(2)
+#define UART_IRQ_MODEM		(3)
+
+#define IRQ_S3CUART_RX0		(IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0		(IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0	(IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1		(IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1		(IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1	(IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2		(IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2		(IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2	(IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3		(IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3		(IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3	(IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S5PC1XX_IRQ_VIC0(x)	(S3C_VIC0_BASE + (x))
+#define S5PC1XX_IRQ_VIC1(x)	(S3C_VIC1_BASE + (x))
+#define S5PC1XX_IRQ_VIC2(x)	(S3C_VIC2_BASE + (x))
+
+/*
+ * VIC0: system, DMA, timer
+ */
+#define IRQ_EINT0		S5PC1XX_IRQ_VIC0(0)
+#define IRQ_EINT1		S5PC1XX_IRQ_VIC0(1)
+#define IRQ_EINT2		S5PC1XX_IRQ_VIC0(2)
+#define IRQ_EINT3		S5PC1XX_IRQ_VIC0(3)
+#define IRQ_EINT4		S5PC1XX_IRQ_VIC0(4)
+#define IRQ_EINT5		S5PC1XX_IRQ_VIC0(5)
+#define IRQ_EINT6		S5PC1XX_IRQ_VIC0(6)
+#define IRQ_EINT7		S5PC1XX_IRQ_VIC0(7)
+#define IRQ_EINT8		S5PC1XX_IRQ_VIC0(8)
+#define IRQ_EINT9		S5PC1XX_IRQ_VIC0(9)
+#define IRQ_EINT10		S5PC1XX_IRQ_VIC0(10)
+#define IRQ_EINT11		S5PC1XX_IRQ_VIC0(11)
+#define IRQ_EINT12		S5PC1XX_IRQ_VIC0(12)
+#define IRQ_EINT13		S5PC1XX_IRQ_VIC0(13)
+#define IRQ_EINT14		S5PC1XX_IRQ_VIC0(14)
+#define IRQ_EINT15		S5PC1XX_IRQ_VIC0(15)
+#define IRQ_EINT16_31		S5PC1XX_IRQ_VIC0(16)
+#define IRQ_BATF		S5PC1XX_IRQ_VIC0(17)
+#define IRQ_MDMA		S5PC1XX_IRQ_VIC0(18)
+#define IRQ_PDMA0		S5PC1XX_IRQ_VIC0(19)
+#define IRQ_PDMA1		S5PC1XX_IRQ_VIC0(20)
+#define IRQ_TIMER0		S5PC1XX_IRQ_VIC0(21)
+#define IRQ_TIMER1		S5PC1XX_IRQ_VIC0(22)
+#define IRQ_TIMER2		S5PC1XX_IRQ_VIC0(23)
+#define IRQ_TIMER3		S5PC1XX_IRQ_VIC0(24)
+#define IRQ_TIMER4		S5PC1XX_IRQ_VIC0(25)
+#define IRQ_SYSTIMER		S5PC1XX_IRQ_VIC0(26)
+#define IRQ_WDT			S5PC1XX_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM		S5PC1XX_IRQ_VIC0(28)
+#define IRQ_RTC_TIC		S5PC1XX_IRQ_VIC0(29)
+#define IRQ_GPIOINT		S5PC1XX_IRQ_VIC0(30)
+
+/*
+ * VIC1: ARM, power, memory, connectivity
+ */
+#define IRQ_CORTEX0		S5PC1XX_IRQ_VIC1(0)
+#define IRQ_CORTEX1		S5PC1XX_IRQ_VIC1(1)
+#define IRQ_CORTEX2		S5PC1XX_IRQ_VIC1(2)
+#define IRQ_CORTEX3		S5PC1XX_IRQ_VIC1(3)
+#define IRQ_CORTEX4		S5PC1XX_IRQ_VIC1(4)
+#define IRQ_IEMAPC		S5PC1XX_IRQ_VIC1(5)
+#define IRQ_IEMIEC		S5PC1XX_IRQ_VIC1(6)
+#define IRQ_ONENAND		S5PC1XX_IRQ_VIC1(7)
+#define IRQ_NFC			S5PC1XX_IRQ_VIC1(8)
+#define IRQ_CFC			S5PC1XX_IRQ_VIC1(9)
+#define IRQ_UART0		S5PC1XX_IRQ_VIC1(10)
+#define IRQ_UART1		S5PC1XX_IRQ_VIC1(11)
+#define IRQ_UART2		S5PC1XX_IRQ_VIC1(12)
+#define IRQ_UART3		S5PC1XX_IRQ_VIC1(13)
+#define IRQ_IIC			S5PC1XX_IRQ_VIC1(14)
+#define IRQ_SPI0		S5PC1XX_IRQ_VIC1(15)
+#define IRQ_SPI1		S5PC1XX_IRQ_VIC1(16)
+#define IRQ_SPI2		S5PC1XX_IRQ_VIC1(17)
+#define IRQ_IRDA		S5PC1XX_IRQ_VIC1(18)
+#define IRQ_CAN0		S5PC1XX_IRQ_VIC1(19)
+#define IRQ_CAN1		S5PC1XX_IRQ_VIC1(20)
+#define IRQ_HSIRX		S5PC1XX_IRQ_VIC1(21)
+#define IRQ_HSITX		S5PC1XX_IRQ_VIC1(22)
+#define IRQ_UHOST		S5PC1XX_IRQ_VIC1(23)
+#define IRQ_OTG			S5PC1XX_IRQ_VIC1(24)
+#define IRQ_MSM			S5PC1XX_IRQ_VIC1(25)
+#define IRQ_HSMMC0		S5PC1XX_IRQ_VIC1(26)
+#define IRQ_HSMMC1		S5PC1XX_IRQ_VIC1(27)
+#define IRQ_HSMMC2		S5PC1XX_IRQ_VIC1(28)
+#define IRQ_MIPICSI		S5PC1XX_IRQ_VIC1(29)
+#define IRQ_MIPIDSI		S5PC1XX_IRQ_VIC1(30)
+
+/*
+ * VIC2: multimedia, audio, security
+ */
+#define IRQ_LCD0		S5PC1XX_IRQ_VIC2(0)
+#define IRQ_LCD1		S5PC1XX_IRQ_VIC2(1)
+#define IRQ_LCD2		S5PC1XX_IRQ_VIC2(2)
+#define IRQ_LCD3		S5PC1XX_IRQ_VIC2(3)
+#define IRQ_ROTATOR		S5PC1XX_IRQ_VIC2(4)
+#define IRQ_FIMC0		S5PC1XX_IRQ_VIC2(5)
+#define IRQ_FIMC1		S5PC1XX_IRQ_VIC2(6)
+#define IRQ_FIMC2		S5PC1XX_IRQ_VIC2(7)
+#define IRQ_JPEG		S5PC1XX_IRQ_VIC2(8)
+#define IRQ_2D			S5PC1XX_IRQ_VIC2(9)
+#define IRQ_3D			S5PC1XX_IRQ_VIC2(10)
+#define IRQ_MIXER		S5PC1XX_IRQ_VIC2(11)
+#define IRQ_HDMI		S5PC1XX_IRQ_VIC2(12)
+#define IRQ_IIC1		S5PC1XX_IRQ_VIC2(13)
+#define IRQ_MFC			S5PC1XX_IRQ_VIC2(14)
+#define IRQ_TVENC		S5PC1XX_IRQ_VIC2(15)
+#define IRQ_I2S0		S5PC1XX_IRQ_VIC2(16)
+#define IRQ_I2S1		S5PC1XX_IRQ_VIC2(17)
+#define IRQ_I2S2		S5PC1XX_IRQ_VIC2(18)
+#define IRQ_AC97		S5PC1XX_IRQ_VIC2(19)
+#define IRQ_PCM0		S5PC1XX_IRQ_VIC2(20)
+#define IRQ_PCM1		S5PC1XX_IRQ_VIC2(21)
+#define IRQ_SPDIF		S5PC1XX_IRQ_VIC2(22)
+#define IRQ_ADC			S5PC1XX_IRQ_VIC2(23)
+#define IRQ_PENDN		S5PC1XX_IRQ_VIC2(24)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_KEYPAD		S5PC1XX_IRQ_VIC2(25)
+#define IRQ_CG			S5PC1XX_IRQ_VIC2(26)
+#define IRQ_SEC			S5PC1XX_IRQ_VIC2(27)
+#define IRQ_SECRX		S5PC1XX_IRQ_VIC2(28)
+#define IRQ_SECTX		S5PC1XX_IRQ_VIC2(29)
+#define IRQ_SDMIRQ		S5PC1XX_IRQ_VIC2(30)
+#define IRQ_SDMFIQ		S5PC1XX_IRQ_VIC2(31)
+
+#define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 1)
+
+#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x)		S3C_EINT(x)
+
+#define NR_IRQS 		(IRQ_EINT(31)+1)
+
+#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
+
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
new file mode 100644
index 00000000000..80d6dd942cb
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -0,0 +1,259 @@
+/* arch/arm/plat-s5pc1xx/irq.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Interrupt handling
+ *
+ * Based on plat-s3c64xx/irq.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/cpu.h>
+
+/* Timer interrupt handling */
+
+static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
+{
+	generic_handle_irq(sub_irq);
+}
+
+static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER0);
+}
+
+static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER1);
+}
+
+static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER2);
+}
+
+static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER3);
+}
+
+static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER4);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg &= ~(1 << (irq - IRQ_TIMER0));
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg |= 1 << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;
+	reg |= (1 << 5) << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+	.name		= "s3c-timer",
+	.mask		= s3c_irq_timer_mask,
+	.unmask		= s3c_irq_timer_unmask,
+	.ack		= s3c_irq_timer_ack,
+};
+
+struct uart_irq {
+	void __iomem	*regs;
+	unsigned int	 base_irq;
+	unsigned int	 parent_irq;
+};
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct uart_irq uart_irqs[] = {
+	[0] = {
+		.regs		= (void *)S3C_VA_UART0,
+		.base_irq	= IRQ_S3CUART_BASE0,
+		.parent_irq	= IRQ_UART0,
+	},
+	[1] = {
+		.regs		= (void *)S3C_VA_UART1,
+		.base_irq	= IRQ_S3CUART_BASE1,
+		.parent_irq	= IRQ_UART1,
+	},
+	[2] = {
+		.regs		= (void *)S3C_VA_UART2,
+		.base_irq	= IRQ_S3CUART_BASE2,
+		.parent_irq	= IRQ_UART2,
+	},
+	[3] = {
+		.regs		= (void *)S3C_VA_UART3,
+		.base_irq	= IRQ_S3CUART_BASE3,
+		.parent_irq	= IRQ_UART3,
+	},
+};
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+	struct uart_irq *uirq = get_irq_chip_data(irq);
+	return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+	return irq & 3;
+}
+
+/* UART interrupt registers, not worth adding to seperate include header */
+#define S3C64XX_UINTP	0x30
+#define S3C64XX_UINTSP	0x34
+#define S3C64XX_UINTM	0x38
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg &= ~(1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+	struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
+	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+	int base = uirq->base_irq;
+
+	if (pend & (1 << 0))
+		generic_handle_irq(base);
+	if (pend & (1 << 1))
+		generic_handle_irq(base + 1);
+	if (pend & (1 << 2))
+		generic_handle_irq(base + 2);
+	if (pend & (1 << 3))
+		generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+	.name		= "s3c-uart",
+	.mask		= s3c_irq_uart_mask,
+	.unmask		= s3c_irq_uart_unmask,
+	.mask_ack	= s3c_irq_uart_maskack,
+	.ack		= s3c_irq_uart_ack,
+};
+
+static void __init s5pc1xx_uart_irq(struct uart_irq *uirq)
+{
+	void __iomem *reg_base = uirq->regs;
+	unsigned int irq;
+	int offs;
+
+	/* mask all interrupts at the start. */
+	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+	for (offs = 0; offs < 3; offs++) {
+		irq = uirq->base_irq + offs;
+
+		set_irq_chip(irq, &s3c_irq_uart);
+		set_irq_chip_data(irq, uirq);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
+{
+	int i;
+	int uart, irq;
+
+	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+	/* initialise the pair of VICs */
+	for (i = 0; i < num; i++)
+		vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
+				vic_valid[i], 0);
+
+	/* add the timer sub-irqs */
+
+	set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0);
+	set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1);
+	set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2);
+	set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3);
+	set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4);
+
+	for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
+		set_irq_chip(irq, &s3c_irq_timer);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
+		s5pc1xx_uart_irq(&uart_irqs[uart]);
+}
+
+
-- 
GitLab


From c1cc3db8e9fcf1c9d2db3f34552c73996d3d8a13 Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:39:56 +0900
Subject: [PATCH 234/257] ARM: S5PC100: Clock and PLL support

S5PC100 has 4 PLLs (APLL,MPLL,EPLL,HPLL) and 3 clock domains. Clock scheme is
implemented here.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: edited title]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s5pc1xx/include/plat/pll.h      |   38 +
 .../plat-s5pc1xx/include/plat/regs-clock.h    |  421 ++++++
 arch/arm/plat-s5pc1xx/s5pc100-clock.c         | 1139 +++++++++++++++++
 3 files changed, 1598 insertions(+)
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/pll.h
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
 create mode 100644 arch/arm/plat-s5pc1xx/s5pc100-clock.c

diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h
new file mode 100644
index 00000000000..21afef1573e
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/pll.h
@@ -0,0 +1,38 @@
+/* arch/arm/plat-s5pc1xx/include/plat/pll.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX PLL code
+ *
+ * Based on plat-s3c64xx/include/plat/pll.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5P_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
+#define S5P_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
+#define S5P_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
+#define S5P_PLL_MDIV_SHIFT	(16)
+#define S5P_PLL_PDIV_SHIFT	(8)
+#define S5P_PLL_SDIV_SHIFT	(0)
+
+#include <asm/div64.h>
+
+static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
+					    u32 pllcon)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
+	pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
+	sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
new file mode 100644
index 00000000000..75c8390cb82
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -0,0 +1,421 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+#define S5PC1XX_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
+
+#define S5PC1XX_APLL_LOCK		S5PC1XX_CLKREG(0x00)
+#define S5PC1XX_MPLL_LOCK		S5PC1XX_CLKREG(0x04)
+#define S5PC1XX_EPLL_LOCK		S5PC1XX_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK		S5PC1XX_CLKREG(0x0C)
+
+#define S5PC1XX_APLL_CON		S5PC1XX_CLKREG(0x100)
+#define S5PC1XX_MPLL_CON		S5PC1XX_CLKREG(0x104)
+#define S5PC1XX_EPLL_CON		S5PC1XX_CLKREG(0x108)
+#define S5PC100_HPLL_CON		S5PC1XX_CLKREG(0x10C)
+
+#define S5PC1XX_CLK_SRC0		S5PC1XX_CLKREG(0x200)
+#define S5PC1XX_CLK_SRC1		S5PC1XX_CLKREG(0x204)
+#define S5PC1XX_CLK_SRC2		S5PC1XX_CLKREG(0x208)
+#define S5PC1XX_CLK_SRC3		S5PC1XX_CLKREG(0x20C)
+
+#define S5PC1XX_CLK_DIV0		S5PC1XX_CLKREG(0x300)
+#define S5PC1XX_CLK_DIV1		S5PC1XX_CLKREG(0x304)
+#define S5PC1XX_CLK_DIV2		S5PC1XX_CLKREG(0x308)
+#define S5PC1XX_CLK_DIV3		S5PC1XX_CLKREG(0x30C)
+#define S5PC1XX_CLK_DIV4		S5PC1XX_CLKREG(0x310)
+
+#define S5PC100_CLK_OUT			S5PC1XX_CLKREG(0x400)
+
+#define S5PC100_CLKGATE_D00		S5PC1XX_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01		S5PC1XX_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02		S5PC1XX_CLKREG(0x508)
+
+#define S5PC100_CLKGATE_D10		S5PC1XX_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11		S5PC1XX_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12		S5PC1XX_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13		S5PC1XX_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14		S5PC1XX_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15		S5PC1XX_CLKREG(0x534)
+
+#define S5PC100_CLKGATE_D20		S5PC1XX_CLKREG(0x540)
+
+#define S5PC100_SCLKGATE0		S5PC1XX_CLKREG(0x560)
+#define S5PC100_SCLKGATE1		S5PC1XX_CLKREG(0x564)
+
+#define S5PC100_OTHERS          S5PC1XX_CLKREG(0x8200)
+
+#define S5PC1XX_EPLL_EN     (1<<31)
+#define S5PC1XX_EPLL_MASK   0xffffffff
+#define S5PC1XX_EPLLVAL(_m, _p, _s)   ((_m) << 16 | ((_p) << 8) | ((_s)))
+
+/* CLKSRC0 */
+#define S5PC1XX_CLKSRC0_APLL_MASK		(0x1<<0)
+#define S5PC1XX_CLKSRC0_APLL_SHIFT		(0)
+#define S5PC1XX_CLKSRC0_MPLL_MASK		(0x1<<4)
+#define S5PC1XX_CLKSRC0_MPLL_SHIFT		(4)
+#define S5PC1XX_CLKSRC0_EPLL_MASK		(0x1<<8)
+#define S5PC1XX_CLKSRC0_EPLL_SHIFT		(8)
+#define S5PC100_CLKSRC0_HPLL_MASK		(0x1<<12)
+#define S5PC100_CLKSRC0_HPLL_SHIFT		(12)
+#define S5PC100_CLKSRC0_AMMUX_MASK		(0x1<<16)
+#define S5PC100_CLKSRC0_AMMUX_SHIFT		(16)
+#define S5PC100_CLKSRC0_HREF_MASK		(0x1<<20)
+#define S5PC100_CLKSRC0_HREF_SHIFT		(20)
+#define S5PC1XX_CLKSRC0_ONENAND_MASK	(0x1<<24)
+#define S5PC1XX_CLKSRC0_ONENAND_SHIFT	(24)
+
+
+/* CLKSRC1 */
+#define S5PC100_CLKSRC1_UART_MASK		(0x1<<0)
+#define S5PC100_CLKSRC1_UART_SHIFT		(0)
+#define S5PC100_CLKSRC1_SPI0_MASK		(0x3<<4)
+#define S5PC100_CLKSRC1_SPI0_SHIFT		(4)
+#define S5PC100_CLKSRC1_SPI1_MASK		(0x3<<8)
+#define S5PC100_CLKSRC1_SPI1_SHIFT		(8)
+#define S5PC100_CLKSRC1_SPI2_MASK		(0x3<<12)
+#define S5PC100_CLKSRC1_SPI2_SHIFT		(12)
+#define S5PC100_CLKSRC1_IRDA_MASK		(0x3<<16)
+#define S5PC100_CLKSRC1_IRDA_SHIFT		(16)
+#define S5PC100_CLKSRC1_UHOST_MASK		(0x3<<20)
+#define S5PC100_CLKSRC1_UHOST_SHIFT		(20)
+#define S5PC100_CLKSRC1_CLK48M_MASK		(0x1<<24)
+#define S5PC100_CLKSRC1_CLK48M_SHIFT	(24)
+
+/* CLKSRC2 */
+#define S5PC100_CLKSRC2_MMC0_MASK		(0x3<<0)
+#define S5PC100_CLKSRC2_MMC0_SHIFT		(0)
+#define S5PC100_CLKSRC2_MMC1_MASK		(0x3<<4)
+#define S5PC100_CLKSRC2_MMC1_SHIFT		(4)
+#define S5PC100_CLKSRC2_MMC2_MASK		(0x3<<8)
+#define S5PC100_CLKSRC2_MMC2_SHIFT		(8)
+#define S5PC100_CLKSRC2_LCD_MASK		(0x3<<12)
+#define S5PC100_CLKSRC2_LCD_SHIFT		(12)
+#define S5PC100_CLKSRC2_FIMC0_MASK		(0x3<<16)
+#define S5PC100_CLKSRC2_FIMC0_SHIFT		(16)
+#define S5PC100_CLKSRC2_FIMC1_MASK		(0x3<<20)
+#define S5PC100_CLKSRC2_FIMC1_SHIFT		(20)
+#define S5PC100_CLKSRC2_FIMC2_MASK		(0x3<<24)
+#define S5PC100_CLKSRC2_FIMC2_SHIFT		(24)
+#define S5PC100_CLKSRC2_MIXER_MASK		(0x3<<28)
+#define S5PC100_CLKSRC2_MIXER_SHIFT		(28)
+
+/* CLKSRC3 */
+#define S5PC100_CLKSRC3_PWI_MASK		(0x3<<0)
+#define S5PC100_CLKSRC3_PWI_SHIFT		(0)
+#define S5PC100_CLKSRC3_HCLKD2_MASK		(0x1<<4)
+#define S5PC100_CLKSRC3_HCLKD2_SHIFT	(4)
+#define S5PC100_CLKSRC3_I2SD2_MASK		(0x3<<8)
+#define S5PC100_CLKSRC3_I2SD2_SHIFT		(8)
+#define S5PC100_CLKSRC3_AUDIO0_MASK		(0x7<<12)
+#define S5PC100_CLKSRC3_AUDIO0_SHIFT	(12)
+#define S5PC100_CLKSRC3_AUDIO1_MASK		(0x7<<16)
+#define S5PC100_CLKSRC3_AUDIO1_SHIFT	(16)
+#define S5PC100_CLKSRC3_AUDIO2_MASK		(0x7<<20)
+#define S5PC100_CLKSRC3_AUDIO2_SHIFT	(20)
+#define S5PC100_CLKSRC3_SPDIF_MASK		(0x3<<24)
+#define S5PC100_CLKSRC3_SPDIF_SHIFT		(24)
+
+
+/* CLKDIV0 */
+#define S5PC1XX_CLKDIV0_APLL_MASK		(0x1<<0)
+#define S5PC1XX_CLKDIV0_APLL_SHIFT		(0)
+#define S5PC100_CLKDIV0_ARM_MASK		(0x7<<4)
+#define S5PC100_CLKDIV0_ARM_SHIFT		(4)
+#define S5PC100_CLKDIV0_D0_MASK		(0x7<<8)
+#define S5PC100_CLKDIV0_D0_SHIFT		(8)
+#define S5PC100_CLKDIV0_PCLKD0_MASK		(0x7<<12)
+#define S5PC100_CLKDIV0_PCLKD0_SHIFT	(12)
+#define S5PC100_CLKDIV0_SECSS_MASK		(0x7<<16)
+#define S5PC100_CLKDIV0_SECSS_SHIFT		(16)
+
+/* CLKDIV1 */
+#define S5PC100_CLKDIV1_AM_MASK		(0x7<<0)
+#define S5PC100_CLKDIV1_AM_SHIFT		(0)
+#define S5PC100_CLKDIV1_MPLL_MASK		(0x3<<4)
+#define S5PC100_CLKDIV1_MPLL_SHIFT		(4)
+#define S5PC100_CLKDIV1_MPLL2_MASK		(0x1<<8)
+#define S5PC100_CLKDIV1_MPLL2_SHIFT		(8)
+#define S5PC100_CLKDIV1_D1_MASK		(0x7<<12)
+#define S5PC100_CLKDIV1_D1_SHIFT		(12)
+#define S5PC100_CLKDIV1_PCLKD1_MASK		(0x7<<16)
+#define S5PC100_CLKDIV1_PCLKD1_SHIFT	(16)
+#define S5PC100_CLKDIV1_ONENAND_MASK	(0x3<<20)
+#define S5PC100_CLKDIV1_ONENAND_SHIFT	(20)
+#define S5PC100_CLKDIV1_CAM_MASK		(0x1F<<24)
+#define S5PC100_CLKDIV1_CAM_SHIFT		(24)
+
+/* CLKDIV2 */
+#define S5PC100_CLKDIV2_UART_MASK		(0x7<<0)
+#define S5PC100_CLKDIV2_UART_SHIFT		(0)
+#define S5PC100_CLKDIV2_SPI0_MASK		(0xf<<4)
+#define S5PC100_CLKDIV2_SPI0_SHIFT		(4)
+#define S5PC100_CLKDIV2_SPI1_MASK		(0xf<<8)
+#define S5PC100_CLKDIV2_SPI1_SHIFT		(8)
+#define S5PC100_CLKDIV2_SPI2_MASK		(0xf<<12)
+#define S5PC100_CLKDIV2_SPI2_SHIFT		(12)
+#define S5PC100_CLKDIV2_IRDA_MASK		(0xf<<16)
+#define S5PC100_CLKDIV2_IRDA_SHIFT		(16)
+#define S5PC100_CLKDIV2_UHOST_MASK		(0xf<<20)
+#define S5PC100_CLKDIV2_UHOST_SHIFT		(20)
+
+/* CLKDIV3 */
+#define S5PC100_CLKDIV3_MMC0_MASK		(0xf<<0)
+#define S5PC100_CLKDIV3_MMC0_SHIFT		(0)
+#define S5PC100_CLKDIV3_MMC1_MASK		(0xf<<4)
+#define S5PC100_CLKDIV3_MMC1_SHIFT		(4)
+#define S5PC100_CLKDIV3_MMC2_MASK		(0xf<<8)
+#define S5PC100_CLKDIV3_MMC2_SHIFT		(8)
+#define S5PC100_CLKDIV3_LCD_MASK		(0xf<<12)
+#define S5PC100_CLKDIV3_LCD_SHIFT		(12)
+#define S5PC100_CLKDIV3_FIMC0_MASK		(0xf<<16)
+#define S5PC100_CLKDIV3_FIMC0_SHIFT		(16)
+#define S5PC100_CLKDIV3_FIMC1_MASK		(0xf<<20)
+#define S5PC100_CLKDIV3_FIMC1_SHIFT		(20)
+#define S5PC100_CLKDIV3_FIMC2_MASK		(0xf<<24)
+#define S5PC100_CLKDIV3_FIMC2_SHIFT		(24)
+#define S5PC100_CLKDIV3_HDMI_MASK		(0xf<<28)
+#define S5PC100_CLKDIV3_HDMI_SHIFT		(28)
+
+/* CLKDIV4 */
+#define S5PC100_CLKDIV4_PWI_MASK		(0x7<<0)
+#define S5PC100_CLKDIV4_PWI_SHIFT		(0)
+#define S5PC100_CLKDIV4_HCLKD2_MASK		(0x7<<4)
+#define S5PC100_CLKDIV4_HCLKD2_SHIFT	(4)
+#define S5PC100_CLKDIV4_I2SD2_MASK		(0xf<<8)
+#define S5PC100_CLKDIV4_I2SD2_SHIFT		(8)
+#define S5PC100_CLKDIV4_AUDIO0_MASK		(0xf<<12)
+#define S5PC100_CLKDIV4_AUDIO0_SHIFT	(12)
+#define S5PC100_CLKDIV4_AUDIO1_MASK		(0xf<<16)
+#define S5PC100_CLKDIV4_AUDIO1_SHIFT	(16)
+#define S5PC100_CLKDIV4_AUDIO2_MASK		(0xf<<20)
+#define S5PC100_CLKDIV4_AUDIO2_SHIFT	(20)
+
+
+/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D00_INTC		(1<<0)
+#define S5PC100_CLKGATE_D00_TZIC		(1<<1)
+#define S5PC100_CLKGATE_D00_CFCON		(1<<2)
+#define S5PC100_CLKGATE_D00_MDMA		(1<<3)
+#define S5PC100_CLKGATE_D00_G2D		(1<<4)
+#define S5PC100_CLKGATE_D00_SECSS		(1<<5)
+#define S5PC100_CLKGATE_D00_CSSYS		(1<<6)
+
+/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D01_DMC		(1<<0)
+#define S5PC100_CLKGATE_D01_SROMC		(1<<1)
+#define S5PC100_CLKGATE_D01_ONENAND		(1<<2)
+#define S5PC100_CLKGATE_D01_NFCON		(1<<3)
+#define S5PC100_CLKGATE_D01_INTMEM		(1<<4)
+#define S5PC100_CLKGATE_D01_EBI		(1<<5)
+
+/* PCLKD0 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D02_SECKEY		(1<<1)
+#define S5PC100_CLKGATE_D02_SDM		(1<<2)
+
+/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D10_PDMA0		(1<<0)
+#define S5PC100_CLKGATE_D10_PDMA1		(1<<1)
+#define S5PC100_CLKGATE_D10_USBHOST		(1<<2)
+#define S5PC100_CLKGATE_D10_USBOTG		(1<<3)
+#define S5PC100_CLKGATE_D10_MODEMIF		(1<<4)
+#define S5PC100_CLKGATE_D10_HSMMC0		(1<<5)
+#define S5PC100_CLKGATE_D10_HSMMC1		(1<<6)
+#define S5PC100_CLKGATE_D10_HSMMC2		(1<<7)
+
+/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D11_LCD		(1<<0)
+#define S5PC100_CLKGATE_D11_ROTATOR		(1<<1)
+#define S5PC100_CLKGATE_D11_FIMC0		(1<<2)
+#define S5PC100_CLKGATE_D11_FIMC1		(1<<3)
+#define S5PC100_CLKGATE_D11_FIMC2		(1<<4)
+#define S5PC100_CLKGATE_D11_JPEG		(1<<5)
+#define S5PC100_CLKGATE_D11_DSI		(1<<6)
+#define S5PC100_CLKGATE_D11_CSI		(1<<7)
+#define S5PC100_CLKGATE_D11_G3D		(1<<8)
+
+/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D12_TV		(1<<0)
+#define S5PC100_CLKGATE_D12_VP		(1<<1)
+#define S5PC100_CLKGATE_D12_MIXER		(1<<2)
+#define S5PC100_CLKGATE_D12_HDMI		(1<<3)
+#define S5PC100_CLKGATE_D12_MFC		(1<<4)
+
+/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
+#define S5PC100_CLKGATE_D13_CHIPID		(1<<0)
+#define S5PC100_CLKGATE_D13_GPIO		(1<<1)
+#define S5PC100_CLKGATE_D13_APC		(1<<2)
+#define S5PC100_CLKGATE_D13_IEC		(1<<3)
+#define S5PC100_CLKGATE_D13_PWM		(1<<6)
+#define S5PC100_CLKGATE_D13_SYSTIMER	(1<<7)
+#define S5PC100_CLKGATE_D13_WDT		(1<<8)
+#define S5PC100_CLKGATE_D13_RTC		(1<<9)
+
+/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
+#define S5PC100_CLKGATE_D14_UART0		(1<<0)
+#define S5PC100_CLKGATE_D14_UART1		(1<<1)
+#define S5PC100_CLKGATE_D14_UART2		(1<<2)
+#define S5PC100_CLKGATE_D14_UART3		(1<<3)
+#define S5PC100_CLKGATE_D14_IIC		(1<<4)
+#define S5PC100_CLKGATE_D14_HDMI_IIC	(1<<5)
+#define S5PC100_CLKGATE_D14_SPI0		(1<<6)
+#define S5PC100_CLKGATE_D14_SPI1		(1<<7)
+#define S5PC100_CLKGATE_D14_SPI2		(1<<8)
+#define S5PC100_CLKGATE_D14_IRDA		(1<<9)
+#define S5PC100_CLKGATE_D14_CCAN0		(1<<10)
+#define S5PC100_CLKGATE_D14_CCAN1		(1<<11)
+#define S5PC100_CLKGATE_D14_HSITX		(1<<12)
+#define S5PC100_CLKGATE_D14_HSIRX		(1<<13)
+
+/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
+#define S5PC100_CLKGATE_D15_IIS0		(1<<0)
+#define S5PC100_CLKGATE_D15_IIS1		(1<<1)
+#define S5PC100_CLKGATE_D15_IIS2		(1<<2)
+#define S5PC100_CLKGATE_D15_AC97		(1<<3)
+#define S5PC100_CLKGATE_D15_PCM0		(1<<4)
+#define S5PC100_CLKGATE_D15_PCM1		(1<<5)
+#define S5PC100_CLKGATE_D15_SPDIF		(1<<6)
+#define S5PC100_CLKGATE_D15_TSADC		(1<<7)
+#define S5PC100_CLKGATE_D15_KEYIF		(1<<8)
+#define S5PC100_CLKGATE_D15_CG		(1<<9)
+
+/* HCLKD2 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D20_HCLKD2		(1<<0)
+#define S5PC100_CLKGATE_D20_I2SD2		(1<<1)
+
+/* Special Clock Gate 0 Registers */
+#define	S5PC1XX_CLKGATE_SCLK0_HPM		(1<<0)
+#define	S5PC1XX_CLKGATE_SCLK0_PWI		(1<<1)
+#define	S5PC100_CLKGATE_SCLK0_ONENAND	(1<<2)
+#define	S5PC100_CLKGATE_SCLK0_UART		(1<<3)
+#define	S5PC100_CLKGATE_SCLK0_SPI0		(1<<4)
+#define	S5PC100_CLKGATE_SCLK0_SPI1		(1<<5)
+#define	S5PC100_CLKGATE_SCLK0_SPI2		(1<<6)
+#define	S5PC100_CLKGATE_SCLK0_SPI0_48	(1<<7)
+#define	S5PC100_CLKGATE_SCLK0_SPI1_48	(1<<8)
+#define	S5PC100_CLKGATE_SCLK0_SPI2_48	(1<<9)
+#define	S5PC100_CLKGATE_SCLK0_IRDA		(1<<10)
+#define	S5PC100_CLKGATE_SCLK0_USBHOST	(1<<11)
+#define	S5PC100_CLKGATE_SCLK0_MMC0		(1<<12)
+#define	S5PC100_CLKGATE_SCLK0_MMC1		(1<<13)
+#define	S5PC100_CLKGATE_SCLK0_MMC2		(1<<14)
+#define	S5PC100_CLKGATE_SCLK0_MMC0_48	(1<<15)
+#define	S5PC100_CLKGATE_SCLK0_MMC1_48	(1<<16)
+#define	S5PC100_CLKGATE_SCLK0_MMC2_48	(1<<17)
+
+/* Special Clock Gate 1 Registers */
+#define	S5PC100_CLKGATE_SCLK1_LCD		(1<<0)
+#define	S5PC100_CLKGATE_SCLK1_FIMC0		(1<<1)
+#define	S5PC100_CLKGATE_SCLK1_FIMC1		(1<<2)
+#define	S5PC100_CLKGATE_SCLK1_FIMC2		(1<<3)
+#define	S5PC100_CLKGATE_SCLK1_TV54		(1<<4)
+#define	S5PC100_CLKGATE_SCLK1_VDAC54	(1<<5)
+#define	S5PC100_CLKGATE_SCLK1_MIXER		(1<<6)
+#define	S5PC100_CLKGATE_SCLK1_HDMI		(1<<7)
+#define	S5PC100_CLKGATE_SCLK1_AUDIO0	(1<<8)
+#define	S5PC100_CLKGATE_SCLK1_AUDIO1	(1<<9)
+#define	S5PC100_CLKGATE_SCLK1_AUDIO2	(1<<10)
+#define	S5PC100_CLKGATE_SCLK1_SPDIF		(1<<11)
+#define	S5PC100_CLKGATE_SCLK1_CAM		(1<<12)
+
+/* register for power management */
+#define S5PC100_PWR_CFG 		S5PC1XX_CLKREG(0x8000)
+#define S5PC100_EINT_WAKEUP_MASK 	S5PC1XX_CLKREG(0x8004)
+#define S5PC100_NORMAL_CFG 		S5PC1XX_CLKREG(0x8010)
+#define S5PC100_STOP_CFG 		S5PC1XX_CLKREG(0x8014)
+#define S5PC100_SLEEP_CFG 		S5PC1XX_CLKREG(0x8018)
+#define S5PC100_STOP_MEM_CFG 	S5PC1XX_CLKREG(0x801C)
+#define S5PC100_OSC_FREQ 		S5PC1XX_CLKREG(0x8100)
+#define S5PC100_OSC_STABLE 		S5PC1XX_CLKREG(0x8104)
+#define S5PC100_PWR_STABLE 		S5PC1XX_CLKREG(0x8108)
+#define S5PC100_MTC_STABLE 		S5PC1XX_CLKREG(0x8110)
+#define S5PC100_CLAMP_STABLE 	S5PC1XX_CLKREG(0x8114)
+#define S5PC100_OTHERS 		S5PC1XX_CLKREG(0x8200)
+#define S5PC100_RST_STAT 		S5PC1XX_CLKREG(0x8300)
+#define S5PC100_WAKEUP_STAT 	S5PC1XX_CLKREG(0x8304)
+#define S5PC100_BLK_PWR_STAT 	S5PC1XX_CLKREG(0x8308)
+#define S5PC100_INFORM0 		S5PC1XX_CLKREG(0x8400)
+#define S5PC100_INFORM1 		S5PC1XX_CLKREG(0x8404)
+#define S5PC100_INFORM2 		S5PC1XX_CLKREG(0x8408)
+#define S5PC100_INFORM3 		S5PC1XX_CLKREG(0x840C)
+#define S5PC100_INFORM4 		S5PC1XX_CLKREG(0x8410)
+#define S5PC100_INFORM5 		S5PC1XX_CLKREG(0x8414)
+#define S5PC100_INFORM6 		S5PC1XX_CLKREG(0x8418)
+#define S5PC100_INFORM7 		S5PC1XX_CLKREG(0x841C)
+#define S5PC100_DCGIDX_MAP0 	S5PC1XX_CLKREG(0x8500)
+#define S5PC100_DCGIDX_MAP1 	S5PC1XX_CLKREG(0x8504)
+#define S5PC100_DCGIDX_MAP2 	S5PC1XX_CLKREG(0x8508)
+#define S5PC100_DCGPERF_MAP0 	S5PC1XX_CLKREG(0x850C)
+#define S5PC100_DCGPERF_MAP1 	S5PC1XX_CLKREG(0x8510)
+#define S5PC100_DVCIDX_MAP 		S5PC1XX_CLKREG(0x8514)
+#define S5PC100_FREQ_CPU 		S5PC1XX_CLKREG(0x8518)
+#define S5PC100_FREQ_DPM 		S5PC1XX_CLKREG(0x851C)
+#define S5PC100_DVSEMCLK_EN 	S5PC1XX_CLKREG(0x8520)
+#define S5PC100_APLL_CON_L8 	S5PC1XX_CLKREG(0x8600)
+#define S5PC100_APLL_CON_L7 	S5PC1XX_CLKREG(0x8604)
+#define S5PC100_APLL_CON_L6 	S5PC1XX_CLKREG(0x8608)
+#define S5PC100_APLL_CON_L5 	S5PC1XX_CLKREG(0x860C)
+#define S5PC100_APLL_CON_L4 	S5PC1XX_CLKREG(0x8610)
+#define S5PC100_APLL_CON_L3 	S5PC1XX_CLKREG(0x8614)
+#define S5PC100_APLL_CON_L2 	S5PC1XX_CLKREG(0x8618)
+#define S5PC100_APLL_CON_L1 	S5PC1XX_CLKREG(0x861C)
+#define S5PC100_IEM_CONTROL 	S5PC1XX_CLKREG(0x8620)
+#define S5PC100_CLKDIV_IEM_L8 	S5PC1XX_CLKREG(0x8700)
+#define S5PC100_CLKDIV_IEM_L7 	S5PC1XX_CLKREG(0x8704)
+#define S5PC100_CLKDIV_IEM_L6 	S5PC1XX_CLKREG(0x8708)
+#define S5PC100_CLKDIV_IEM_L5 	S5PC1XX_CLKREG(0x870C)
+#define S5PC100_CLKDIV_IEM_L4 	S5PC1XX_CLKREG(0x8710)
+#define S5PC100_CLKDIV_IEM_L3 	S5PC1XX_CLKREG(0x8714)
+#define S5PC100_CLKDIV_IEM_L2 	S5PC1XX_CLKREG(0x8718)
+#define S5PC100_CLKDIV_IEM_L1 	S5PC1XX_CLKREG(0x871C)
+#define S5PC100_IEM_HPMCLK_DIV 	S5PC1XX_CLKREG(0x8724)
+
+#define S5PC100_SWRESET		S5PC1XX_CLKREG(0x100000)
+#define S5PC100_OND_SWRESET		S5PC1XX_CLKREG(0x100008)
+#define S5PC100_GEN_CTRL		S5PC1XX_CLKREG(0x100100)
+#define S5PC100_GEN_STATUS		S5PC1XX_CLKREG(0x100104)
+#define S5PC100_MEM_SYS_CFG		S5PC1XX_CLKREG(0x100200)
+#define S5PC100_CAM_MUX_SEL		S5PC1XX_CLKREG(0x100300)
+#define S5PC100_MIXER_OUT_SEL	S5PC1XX_CLKREG(0x100304)
+#define S5PC100_LPMP_MODE_SEL	S5PC1XX_CLKREG(0x100308)
+#define S5PC100_MIPI_PHY_CON0	S5PC1XX_CLKREG(0x100400)
+#define S5PC100_MIPI_PHY_CON1	S5PC1XX_CLKREG(0x100414)
+#define S5PC100_HDMI_PHY_CON0	S5PC1XX_CLKREG(0x100420)
+
+#define S5PC100_CFG_WFI_CLEAN	(~(3<<5))
+#define S5PC100_CFG_WFI_IDLE	(1<<5)
+#define S5PC100_CFG_WFI_STOP	(2<<5)
+#define S5PC100_CFG_WFI_SLEEP	(3<<5)
+
+#define S5PC100_OTHER_SYS_INT	24
+#define S5PC100_OTHER_STA_TYPE	23
+#define STA_TYPE_EXPON		0
+#define STA_TYPE_SFR		1
+
+#define S5PC100_PWR_STA_EXP_SCALE	0
+#define S5PC100_PWR_STA_CNT		4
+
+#define S5PC100_PWR_STABLE_COUNT	85500
+
+#define S5PC100_SLEEP_CFG_OSC_EN	0
+
+/* OTHERS Resgister */
+#define S5PC100_OTHERS_USB_SIG_MASK 	(1 << 16)
+#define S5PC100_OTHERS_MIPI_DPHY_EN		(1 << 28)
+
+/* MIPI D-PHY Control Register 0 */
+#define S5PC100_MIPI_PHY_CON0_M_RESETN	(1 << 1)
+#define S5PC100_MIPI_PHY_CON0_S_RESETN	(1 << 0)
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
new file mode 100644
index 00000000000..6b24035172f
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -0,0 +1,1139 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+ *
+ * Copyright 2009 Samsung Electronics, Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 based common clock support
+ *
+ * Based on plat-s3c64xx/s3c6400-clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+static struct clk clk_ext_xtal_mux = {
+	.name		= "ext_xtal",
+	.id		= -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
+
+#define clk_fout_mpll	clk_mpll
+
+struct clk_sources {
+	unsigned int	nr_sources;
+	struct clk	**sources;
+};
+
+struct clksrc_clk {
+	struct clk		clk;
+	unsigned int		mask;
+	unsigned int		shift;
+
+	struct clk_sources	*sources;
+
+	unsigned int		divider_shift;
+	void __iomem		*reg_divider;
+	void __iomem		*reg_source;
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 1;
+}
+
+struct clk clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5PC1XX_CLK_SRC1);
+	if (enable)
+		val |= S5PC100_CLKSRC1_CLK48M_MASK;
+	else
+		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+	__raw_writel(val, S5PC1XX_CLK_SRC1);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+	.enable		= clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+	.name		= "clk_54m",
+	.id		= -1,
+	.rate		= 54000000,
+};
+
+struct clk clk_hpll = {
+	.name		= "hpll",
+	.id		= -1,
+};
+
+struct clk clk_hd0 = {
+	.name		= "hclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+};
+
+struct clk clk_pd0 = {
+	.name		= "pclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg,
+				struct clk *clk,
+				int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+
+	__raw_writel(con, reg);
+	return 0;
+}
+
+static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "dsi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
+	}, {
+		.name		= "csi",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
+	}, {
+		.name		= "ccan0",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
+	}, {
+		.name		= "ccan1",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
+	}, {
+		.name		= "keypad",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
+	}, {
+		.name		= "hclkd2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
+	}, {
+		.name		= "iis-d2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
+	},
+};
+
+static struct clk init_clocks[] = {
+	/* System1 (D0_0) devices */
+	{
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
+	}, {
+		.name		= "tzic",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
+	}, {
+		.name		= "cf-ata",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
+	}, {
+		.name		= "mdma",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
+	}, {
+		.name		= "g2d",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
+	}, {
+		.name		= "secss",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
+	}, {
+		.name		= "cssys",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
+	},
+
+	/* Memory (D0_1) devices */
+	{
+		.name		= "dmc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
+	}, {
+		.name		= "sromc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
+	}, {
+		.name		= "onenand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
+	}, {
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
+	}, {
+		.name		= "intmem",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
+	}, {
+		.name		= "ebi",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
+	},
+
+	/* System2 (D0_2) devices */
+	{
+		.name		= "seckey",
+		.id		= -1,
+		.parent		= &clk_pd0,
+		.enable		= s5pc1xx_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
+	}, {
+		.name		= "sdm",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
+	},
+
+	/* File (D1_0) devices */
+	{
+		.name		= "pdma0",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
+	}, {
+		.name		= "pdma1",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
+	}, {
+		.name		= "modem",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
+	},
+
+	/* Multimedia1 (D1_1) devices */
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
+	}, {
+		.name		= "rotator",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
+	}, {
+		.name		= "fimc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
+	}, {
+		.name		= "fimc",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
+	}, {
+		.name		= "fimc",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
+	}, {
+		.name		= "jpeg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
+	}, {
+		.name		= "g3d",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
+	},
+
+	/* Multimedia2 (D1_2) devices */
+	{
+		.name		= "tv",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
+	}, {
+		.name		= "vp",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
+	}, {
+		.name		= "mixer",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
+	}, {
+		.name		= "hdmi",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
+	}, {
+		.name		= "mfc",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
+	},
+
+	/* System (D1_3) devices */
+	{
+		.name		= "chipid",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
+	}, {
+		.name		= "apc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
+	}, {
+		.name		= "iec",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
+	}, {
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
+	},
+
+	/* Connectivity (D1_4) devices */
+	{
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
+	}, {
+		.name		= "hdmi-i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
+	}, {
+		.name		= "spi",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
+	}, {
+		.name		= "irda",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
+	}, {
+		.name		= "hsitx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
+	}, {
+		.name		= "hsirx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
+	},
+
+	/* Audio (D1_5) devices */
+	{
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
+	}, {
+		.name		= "iis",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
+	}, {
+		.name		= "pcm",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
+	}, {
+		.name		= "pcm",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
+	}, {
+		.name		= "spdif",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
+	}, {
+		.name		= "keyif",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
+	}, {
+		.name		= "cg",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
+	},
+
+	/* Audio (D2_0) devices: all disabled */
+
+	/* Special Clocks 1 */
+	{
+		.name		= "sclk_hpm",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC1XX_CLKGATE_SCLK0_HPM,
+	}, {
+		.name		= "sclk_onenand",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
+	}, {
+		.name		= "sclk_mmc_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
+	}, {
+		.name		= "sclk_mmc_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
+	}, {
+		.name		= "sclk_mmc_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
+	},
+
+	/* Special Clocks 2 */
+	{
+		.name		= "sclk_tv_54",
+		.id		= -1,
+		.parent		= &clk_54m,
+		.enable		= s5pc1xx_sclk1_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_TV54,
+	}, {
+		.name		= "sclk_vdac_54",
+		.id		= -1,
+		.parent		= &clk_54m,
+		.enable		= s5pc1xx_sclk1_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_VDAC54,
+	}, {
+		.name		= "sclk_spdif",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_sclk1_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_SPDIF,
+	},
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	clkp = init_clocks;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
+static struct clk clk_fout_apll = {
+	.name		= "fout_apll",
+	.id		= -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+static struct clk_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.shift		= S5PC1XX_CLKSRC0_APLL_SHIFT,
+	.mask		= S5PC1XX_CLKSRC0_APLL_MASK,
+	.sources	= &clk_src_apll,
+	.reg_source	= S5PC1XX_CLK_SRC0,
+};
+
+static struct clk clk_fout_epll = {
+	.name		= "fout_epll",
+	.id		= -1,
+};
+
+static struct clk *clk_src_epll_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_fout_epll,
+};
+
+static struct clk_sources clk_src_epll = {
+	.sources	= clk_src_epll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.shift		= S5PC1XX_CLKSRC0_EPLL_SHIFT,
+	.mask		= S5PC1XX_CLKSRC0_EPLL_MASK,
+	.sources	= &clk_src_epll,
+	.reg_source	= S5PC1XX_CLK_SRC0,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+static struct clk_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.shift		= S5PC1XX_CLKSRC0_MPLL_SHIFT,
+	.mask		= S5PC1XX_CLKSRC0_MPLL_MASK,
+	.sources	= &clk_src_mpll,
+	.reg_source	= S5PC1XX_CLK_SRC0,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
+
+	return rate;
+}
+
+static struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.get_rate	= s5pc1xx_clk_doutmpll_get_rate,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
+
+	return rate;
+}
+
+struct clk clk_dout_mpll2 = {
+	.name		= "dout_mpll2",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.get_rate	= s5pc1xx_clk_doutmpll2_get_rate,
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	NULL,
+	NULL
+};
+
+static struct clk_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+	return container_of(clk, struct clksrc_clk, clk);
+}
+
+static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv = __raw_readl(sclk->reg_divider);
+
+	clkdiv >>= sclk->divider_shift;
+	clkdiv &= 0xf;
+	clkdiv++;
+
+	rate /= clkdiv;
+	return rate;
+}
+
+static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	void __iomem *reg = sclk->reg_divider;
+	unsigned int div;
+	u32 val;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+	if (div > 16)
+		return -EINVAL;
+
+	val = __raw_readl(reg);
+	val &= ~(0xf << sclk->shift);
+	val |= (div - 1) << sclk->shift;
+	__raw_writel(val, reg);
+
+	return 0;
+}
+
+static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	struct clk_sources *srcs = sclk->sources;
+	u32 clksrc = __raw_readl(sclk->reg_source);
+	int src_nr = -1;
+	int ptr;
+
+	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+		if (srcs->sources[ptr] == parent) {
+			src_nr = ptr;
+			break;
+		}
+
+	if (src_nr >= 0) {
+		clksrc &= ~sclk->mask;
+		clksrc |= src_nr << sclk->shift;
+
+		__raw_writel(clksrc, sclk->reg_source);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int div;
+
+	if (rate > parent_rate)
+		rate = parent_rate;
+	else {
+		div = rate / parent_rate;
+
+		if (div == 0)
+			div = 1;
+		if (div > 16)
+			div = 16;
+
+		rate = parent_rate / div;
+	}
+
+	return rate;
+}
+
+static struct clksrc_clk clk_uart_uclk1 = {
+	.clk	= {
+		.name		= "uclk1",
+		.id		= -1,
+		.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.set_parent	= s5pc1xx_setparent_clksrc,
+		.get_rate	= s5pc1xx_getrate_clksrc,
+		.set_rate	= s5pc1xx_setrate_clksrc,
+		.round_rate	= s5pc1xx_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_UART_SHIFT,
+	.mask		= S5PC100_CLKSRC1_UART_MASK,
+	.sources	= &clkset_uart,
+	.divider_shift	= S5PC100_CLKDIV2_UART_SHIFT,
+	.reg_divider	= S5PC1XX_CLK_DIV2,
+	.reg_source	= S5PC1XX_CLK_SRC1,
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_uart_uclk1,
+};
+
+static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+{
+	struct clk_sources *srcs = clk->sources;
+	u32 clksrc = __raw_readl(clk->reg_source);
+
+	clksrc &= clk->mask;
+	clksrc >>= clk->shift;
+
+	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+		printk(KERN_ERR "%s: bad source %d\n",
+		       clk->clk.name, clksrc);
+		return;
+	}
+
+	clk->clk.parent = srcs->sources[clksrc];
+
+	printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+	       clk->clk.name, clk->clk.parent->name, clksrc,
+	       clk_get_rate(&clk->clk));
+}
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s5pc100_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long armclk;
+	unsigned long hclkd0;
+	unsigned long hclk;
+	unsigned long pclkd0;
+	unsigned long pclk;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long hpll;
+	unsigned long epll;
+	unsigned int ptr;
+	u32 clkdiv0, clkdiv1;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
+	clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
+			__func__, clkdiv0, clkdiv1);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
+	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
+	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+	hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
+
+	printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
+	       apll, mpll, epll, hpll);
+
+	armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+	armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
+	hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
+	pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
+	hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
+	pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
+
+	printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
+	       armclk, hclkd0, pclkd0, hclk, pclk);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_apll.rate = apll;
+
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s5pc1xx_set_clksrc(init_parents[ptr]);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_ext_xtal_mux,
+	&clk_mout_epll.clk,
+	&clk_fout_epll,
+	&clk_mout_mpll.clk,
+	&clk_dout_mpll,
+	&clk_uart_uclk1.clk,
+	&clk_ext,
+	&clk_epll,
+	&clk_27m,
+	&clk_48m,
+	&clk_54m,
+};
+
+void __init s5pc100_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+		clkp = clks[ptr];
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clk_mpll.parent = &clk_mout_mpll.clk;
+	clk_epll.parent = &clk_mout_epll.clk;
+}
-- 
GitLab


From 5a7652f2032b88106c9ba41edf0fb795397008bd Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:39:42 +0900
Subject: [PATCH 235/257] ARM: S5PC100: Kconfigs and Makefiles

S5PC100 is a new SoC with ARM coretex-A8 and numerous peripherals. This SoC is
successor of S3C64XX. S5PC100 has peripherals which are still similar to S3C
families so some drivers in "arch/arm/plat-s3c" can be shared. S5PC100 specific
drivers will be added in "arch/arm/plat-s5pcxx" or "arch/arm/mach-s5pc100"

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: tidy and edit description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig                              | 13 +++++
 arch/arm/Makefile                             |  2 +
 arch/arm/mach-s5pc100/Kconfig                 | 22 ++++++++
 arch/arm/mach-s5pc100/Makefile                | 17 +++++++
 arch/arm/mach-s5pc100/Makefile.boot           |  2 +
 arch/arm/mach-s5pc100/include/mach/hardware.h |  2 +-
 arch/arm/plat-s5pc1xx/Kconfig                 | 50 +++++++++++++++++++
 arch/arm/plat-s5pc1xx/Makefile                | 26 ++++++++++
 8 files changed, 133 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-s5pc100/Kconfig
 create mode 100644 arch/arm/mach-s5pc100/Makefile
 create mode 100644 arch/arm/mach-s5pc100/Makefile.boot
 create mode 100644 arch/arm/plat-s5pc1xx/Kconfig
 create mode 100644 arch/arm/plat-s5pc1xx/Makefile

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f07a4ba281b..be89ab3aacf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -588,6 +588,14 @@ config ARCH_S3C64XX
 	help
 	  Samsung S3C64XX series based systems
 
+config ARCH_S5PC1XX
+	bool "Samsung S5PC1XX"
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select CPU_V7
+	help
+	  Samsung S5PC1XX series based systems
+
 config ARCH_SHARK
 	bool "Shark"
 	select CPU_SA110
@@ -698,6 +706,7 @@ source "arch/arm/mach-kirkwood/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5pc1xx/Kconfig"
 
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
@@ -715,6 +724,10 @@ endif
 
 source "arch/arm/plat-stmp3xxx/Kconfig"
 
+if ARCH_S5PC1XX
+source "arch/arm/mach-s5pc100/Kconfig"
+endif
+
 source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..96659415953 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_RPC)		:= rpc
 machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
@@ -168,6 +169,7 @@ plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
 plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
new file mode 100644
index 00000000000..b1a4ba50441
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -0,0 +1,22 @@
+# arch/arm/mach-s5pc100/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+#	Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PC100 CPU
+
+config CPU_S5PC100
+	bool
+	select CPU_S5PC100_INIT
+	select CPU_S5PC100_CLOCK
+	help
+	  Enable S5PC100 CPU support
+
+config MACH_SMDKC100
+	bool "SMDKC100"
+	select CPU_S5PC100
+	select S5PC1XX_SETUP_I2C1
+	help
+	  Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
new file mode 100644
index 00000000000..afc89b381d7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -0,0 +1,17 @@
+# arch/arm/mach-s5pc100/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5PC100 system
+
+obj-$(CONFIG_CPU_S5PC100)	+= cpu.o
+
+# machine support
+obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot
new file mode 100644
index 00000000000..ff90aa13bd6
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x20008000
+params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
index 38ce8206a1a..6b38618c2fd 100644
--- a/arch/arm/mach-s5pc100/include/mach/hardware.h
+++ b/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -3,7 +3,7 @@
  * Copyright 2009 Samsung Electronics Co.
  *      Byungho Min <bhmin@samsung.com>
  *
- * S3C6400 - Hardware support
+ * S5PC100 - Hardware support
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
new file mode 100644
index 00000000000..a8a711c3c06
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -0,0 +1,50 @@
+# arch/arm/plat-s5pc1xx/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+#	Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+config PLAT_S5PC1XX
+	bool
+	depends on ARCH_S5PC1XX
+	default y
+	select PLAT_S3C
+	select ARM_VIC
+	select NO_IOPORT
+	select ARCH_REQUIRE_GPIOLIB
+	select S3C_GPIO_TRACK
+	select S3C_GPIO_PULL_UPDOWN
+	help
+	  Base platform code for any Samsung S5PC1XX device
+
+if PLAT_S5PC1XX
+
+# Configuration options shared by all S3C64XX implementations
+
+config CPU_S5PC100_INIT
+	bool
+	help
+	  Common initialisation code for the S5PC1XX
+
+config CPU_S5PC100_CLOCK
+	bool
+	help
+	  Common clock support code for the S5PC1XX
+
+# platform specific device setup
+
+config S5PC100_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S5PC100_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
new file mode 100644
index 00000000000..f1ecb2c37ee
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -0,0 +1,26 @@
+# arch/arm/plat-s5pc1xx/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:= dummy.o
+obj-				:=
+
+# Core files
+
+obj-y				+= dev-uart.o
+obj-y				+= cpu.o
+obj-y				+= irq.o
+
+# CPU support
+
+obj-$(CONFIG_CPU_S5PC100_INIT)	+= s5pc100-init.o
+obj-$(CONFIG_CPU_S5PC100_CLOCK)	+= s5pc100-clock.o
+
+# Device setup
+
+obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
-- 
GitLab


From e119766f4e15274e2cd9bb5f25119c8b008d920b Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:28 +0900
Subject: [PATCH 236/257] ARM: S5PC100: Board and configuration file

SMDKC100 board support.
The board can be obtained from meritech (http://www.meritech.co.kr)

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: fixup subject and description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/configs/s5pc100_defconfig    | 892 ++++++++++++++++++++++++++
 arch/arm/mach-s5pc100/mach-smdkc100.c | 103 +++
 2 files changed, 995 insertions(+)
 create mode 100644 arch/arm/configs/s5pc100_defconfig
 create mode 100644 arch/arm/mach-s5pc100/mach-smdkc100.c

diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
new file mode 100644
index 00000000000..b0d7d3d3a5e
--- /dev/null
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -0,0 +1,892 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jul  1 15:53:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+CONFIG_ARCH_S5PC1XX=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_PLAT_S5PC1XX=y
+CONFIG_CPU_S5PC100_INIT=y
+CONFIG_CPU_S5PC100_CLOCK=y
+CONFIG_S5PC100_SETUP_I2C0=y
+CONFIG_CPU_S5PC100=y
+CONFIG_MACH_SMDKC100=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C_PORT=y
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
new file mode 100644
index 00000000000..214093cd763
--- /dev/null
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -0,0 +1,103 @@
+/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Author: Byungho Min <bhmin@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/s5pc100.h>
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+static struct map_desc smdkc100_iodesc[] = {};
+
+static struct platform_device *smdkc100_devices[] __initdata = {
+};
+
+static void __init smdkc100_map_io(void)
+{
+	s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
+}
+
+static void __init smdkc100_machine_init(void)
+{
+	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
+}
+
+MACHINE_START(SMDKC100, "SMDKC100")
+	/* Maintainer: Byungho Min <bhmin@samsung.com> */
+	.phys_io	= S5PC1XX_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5PC100_PA_SDRAM + 0x100,
+
+	.init_irq	= s5pc100_init_irq,
+	.map_io		= smdkc100_map_io,
+	.init_machine	= smdkc100_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
-- 
GitLab


From db616eb67604242c11bfbb331bb143bfe4a2e386 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 16 Aug 2009 23:54:58 +0100
Subject: [PATCH 237/257] ARM: S3C: Add S3C_DEV_NAND Kconfig entry

Currently the S5PC100 does not define S3C_PA_NAND, leaving the NAND device
definitions in arch/arm/plat-s3c/dev-nand.c unbuildable. Add a KConfig
entry to select whether this is built.

As backwards compatibility, both the S3C24XX and S3C64XX define the new
configuration in their main Kconfig files until better support for basing
this selection on a per-machine basis can be sorted out.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Kconfig     | 5 +++++
 arch/arm/plat-s3c/Makefile    | 2 +-
 arch/arm/plat-s3c24xx/Kconfig | 1 +
 arch/arm/plat-s3c64xx/Kconfig | 1 +
 4 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 935c7558469..8931c5f0e46 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -198,4 +198,9 @@ config S3C_DEV_USB_HSOTG
 	help
 	  Compile in platform device definition for USB high-speed OtG
 
+config S3C_DEV_NAND
+	bool
+	help
+	  Compile in platform device definition for NAND controller
+
 endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index f32d045e7e3..3c09109e9e8 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -41,4 +41,4 @@ obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
-obj-y				+= dev-nand.o
+obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 2f914568359..9c7aca48964 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -10,6 +10,7 @@ config PLAT_S3C24XX
 	default y
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
+	select S3C_DEVICE_NAND
 	help
 	  Base platform code for any Samsung S3C24XX device
 
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 5ebd8b425a5..bcfa778614d 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@ config PLAT_S3C64XX
 	select S3C_GPIO_PULL_UPDOWN
 	select S3C_GPIO_CFG_S3C24XX
 	select S3C_GPIO_CFG_S3C64XX
+	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	help
 	  Base platform code for any Samsung S3C64XX device
-- 
GitLab


From baa28e3530375e0bef2c53243634a1c78f5c02f3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Mon, 3 Aug 2009 15:11:29 +0100
Subject: [PATCH 238/257] ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ

The show_fiq_list() call in arch/arm/kernel/irq.c currently depends on
CONFIG_ARCH_ACORN, but this is not the only architecture that supports
the usage of FIQ. Change to calling this if CONFIG_FIQ is set (which
is what arch/arm/kernel/fiq.c is built by).

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/kernel/irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index b7c3490eaa2..c9a8619f385 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -86,7 +86,7 @@ int show_interrupts(struct seq_file *p, void *v)
 unlock:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
 	} else if (i == NR_IRQS) {
-#ifdef CONFIG_ARCH_ACORN
+#ifdef CONFIG_FIQ
 		show_fiq_list(p, v);
 #endif
 #ifdef CONFIG_SMP
-- 
GitLab


From 65cec8e3db606608fd1f8dfc4a1c7c37bfba9173 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 17 Aug 2009 20:02:06 +0100
Subject: [PATCH 239/257] ARM: implement highpte

Add the ARM implementation of highpte, which allows PTE tables to be
placed in highmem.  Unfortunately, we do not offer highpte support
when support for L2 cache is enabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig               |  5 +++++
 arch/arm/include/asm/pgalloc.h | 16 ++++++++++++----
 arch/arm/include/asm/pgtable.h | 17 +++++++++++++----
 arch/arm/mm/fault.c            |  1 +
 4 files changed, 31 insertions(+), 8 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..370f4778712 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1054,6 +1054,11 @@ config HIGHMEM
 
 	  If unsure, say n.
 
+config HIGHPTE
+	bool "Allocate 2nd-level pagetables from highmem"
+	depends on HIGHMEM
+	depends on !OUTER_CACHE
+
 source "mm/Kconfig"
 
 config LEDS
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 3dcd64bf182..b12cc98bbe0 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -36,6 +36,8 @@ extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
 #define pgd_alloc(mm)			get_pgd_slow(mm)
 #define pgd_free(mm, pgd)		free_pgd_slow(mm, pgd)
 
+#define PGALLOC_GFP	(GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+
 /*
  * Allocate one PTE table.
  *
@@ -57,7 +59,7 @@ pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
 {
 	pte_t *pte;
 
-	pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	pte = (pte_t *)__get_free_page(PGALLOC_GFP);
 	if (pte) {
 		clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
 		pte += PTRS_PER_PTE;
@@ -71,10 +73,16 @@ pte_alloc_one(struct mm_struct *mm, unsigned long addr)
 {
 	struct page *pte;
 
-	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+#ifdef CONFIG_HIGHPTE
+	pte = alloc_pages(PGALLOC_GFP | __GFP_HIGHMEM, 0);
+#else
+	pte = alloc_pages(PGALLOC_GFP, 0);
+#endif
 	if (pte) {
-		void *page = page_address(pte);
-		clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+		if (!PageHighMem(pte)) {
+			void *page = page_address(pte);
+			clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+		}
 		pgtable_page_ctor(pte);
 	}
 
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 9655bce3d34..201ccaa11f6 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -262,10 +262,19 @@ extern struct page *empty_zero_page;
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 #define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
 #define pte_offset_kernel(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map_nested(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_unmap(pte)		do { } while (0)
-#define pte_unmap_nested(pte)	do { } while (0)
+
+#define pte_offset_map(dir,addr)	(__pte_map(dir, KM_PTE0) + __pte_index(addr))
+#define pte_offset_map_nested(dir,addr)	(__pte_map(dir, KM_PTE1) + __pte_index(addr))
+#define pte_unmap(pte)			__pte_unmap(pte, KM_PTE0)
+#define pte_unmap_nested(pte)		__pte_unmap(pte, KM_PTE1)
+
+#ifndef CONFIG_HIGHPTE
+#define __pte_map(dir,km)	pmd_page_vaddr(*(dir))
+#define __pte_unmap(pte,km)	do { } while (0)
+#else
+#define __pte_map(dir,km)	((pte_t *)kmap_atomic(pmd_page(*(dir)), km) + PTRS_PER_PTE)
+#define __pte_unmap(pte,km)	kunmap_atomic((pte - PTRS_PER_PTE), km)
+#endif
 
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 6fdcbb70982..5fa8dea5a37 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -16,6 +16,7 @@
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
 #include <linux/page-flags.h>
+#include <linux/highmem.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
-- 
GitLab


From 7064d2092df5cbff289457424969292bc4062df4 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Wed, 26 Aug 2009 09:58:24 +0100
Subject: [PATCH 240/257] ARM: 5685/1: Make MMCI driver compile without gpiolib

The recent addition of optional gpiolib support to check if a
card was inserted or write protected was really not optional.
It needs this ifdef to become optional so that U300 compiles,
for example.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/mmc/host/mmci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 5eb86a8c943..a923ee27c09 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -619,6 +619,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	writel(0, host->base + MMCIMASK1);
 	writel(0xfff, host->base + MMCICLEAR);
 
+#ifdef CONFIG_GPIOLIB
 	if (gpio_is_valid(plat->gpio_cd)) {
 		ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
 		if (ret == 0)
@@ -637,6 +638,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 		else if (ret != -ENOSYS)
 			goto err_gpio_wp;
 	}
+#endif
 
 	ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);
 	if (ret)
-- 
GitLab


From 98b0979f025e5b98ce8f24e6dc0f9713e6f6c88c Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 9 Jul 2009 15:17:41 +0100
Subject: [PATCH 241/257] MMC: MMCI: convert realview MMC to use gpiolib

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/core.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 17a07e6acfa..ab615e78b79 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -222,6 +222,9 @@ arch_initcall(realview_i2c_init);
 
 #define REALVIEW_SYSMCI	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
 
+/*
+ * This is only used if GPIOLIB support is disabled
+ */
 static unsigned int realview_mmc_status(struct device *dev)
 {
 	struct amba_device *adev = container_of(dev, struct amba_device, dev);
@@ -238,15 +241,15 @@ static unsigned int realview_mmc_status(struct device *dev)
 struct mmc_platform_data realview_mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
+	.gpio_wp	= 17,
+	.gpio_cd	= 16,
 };
 
 struct mmc_platform_data realview_mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
+	.gpio_wp	= 19,
+	.gpio_cd	= 18,
 };
 
 /*
-- 
GitLab


From 8afe0b96b36bb967a00658003736ffa97967ee80 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Tue, 28 Jul 2009 23:34:59 +0100
Subject: [PATCH 242/257] ARM: 5625/1: fix hard coded 4K resource size in amba
 bus detection

This patch modifies the amba bus detection logic in the kernel
to detect the AMBA devices using the calculated resource
size information rather than the hard coded 4K size.

It also calculates the resource size when request mem region
and release mem region.

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/amba/bus.c | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 3d763fdf99b..768d973d0de 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -204,6 +204,7 @@ static void amba_device_release(struct device *dev)
 int amba_device_register(struct amba_device *dev, struct resource *parent)
 {
 	u32 pid, cid;
+	u32 size;
 	void __iomem *tmp;
 	int i, ret;
 
@@ -219,16 +220,25 @@ int amba_device_register(struct amba_device *dev, struct resource *parent)
 	if (ret)
 		goto err_out;
 
-	tmp = ioremap(dev->res.start, SZ_4K);
+	/*
+	 * Dynamically calculate the size of the resource
+	 * and use this for iomap
+	 */
+	size = resource_size(&dev->res);
+	tmp = ioremap(dev->res.start, size);
 	if (!tmp) {
 		ret = -ENOMEM;
 		goto err_release;
 	}
 
+	/*
+	 * Read pid and cid based on size of resource
+	 * they are located at end of region
+	 */
 	for (pid = 0, i = 0; i < 4; i++)
-		pid |= (readl(tmp + 0xfe0 + 4 * i) & 255) << (i * 8);
+		pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) << (i * 8);
 	for (cid = 0, i = 0; i < 4; i++)
-		cid |= (readl(tmp + 0xff0 + 4 * i) & 255) << (i * 8);
+		cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) << (i * 8);
 
 	iounmap(tmp);
 
@@ -343,11 +353,14 @@ amba_find_device(const char *busid, struct device *parent, unsigned int id,
 int amba_request_regions(struct amba_device *dev, const char *name)
 {
 	int ret = 0;
+	u32 size;
 
 	if (!name)
 		name = dev->dev.driver->name;
 
-	if (!request_mem_region(dev->res.start, SZ_4K, name))
+	size = resource_size(&dev->res);
+
+	if (!request_mem_region(dev->res.start, size, name))
 		ret = -EBUSY;
 
 	return ret;
@@ -361,7 +374,10 @@ int amba_request_regions(struct amba_device *dev, const char *name)
  */
 void amba_release_regions(struct amba_device *dev)
 {
-	release_mem_region(dev->res.start, SZ_4K);
+	u32 size;
+
+	size = resource_size(&dev->res);
+	release_mem_region(dev->res.start, size);
 }
 
 EXPORT_SYMBOL(amba_driver_register);
-- 
GitLab


From b736b89f8a001cb73f020ca90a6fac77861cddf6 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Tue, 28 Jul 2009 23:43:33 +0100
Subject: [PATCH 243/257] ARM: 5626/1: add suspend/resume functions to
 amba-pl011 serial driver

Add suspend/resume functions to the AMBA pl011 serial driver.

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/serial/amba-pl011.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index bf82e28770a..72ba0c6d355 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -826,6 +826,28 @@ static int pl011_remove(struct amba_device *dev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int pl011_suspend(struct amba_device *dev, pm_message_t state)
+{
+	struct uart_amba_port *uap = amba_get_drvdata(dev);
+
+	if (!uap)
+		return -EINVAL;
+
+	return uart_suspend_port(&amba_reg, &uap->port);
+}
+
+static int pl011_resume(struct amba_device *dev)
+{
+	struct uart_amba_port *uap = amba_get_drvdata(dev);
+
+	if (!uap)
+		return -EINVAL;
+
+	return uart_resume_port(&amba_reg, &uap->port);
+}
+#endif
+
 static struct amba_id pl011_ids[] __initdata = {
 	{
 		.id	= 0x00041011,
@@ -847,6 +869,10 @@ static struct amba_driver pl011_driver = {
 	.id_table	= pl011_ids,
 	.probe		= pl011_probe,
 	.remove		= pl011_remove,
+#ifdef CONFIG_PM
+	.suspend	= pl011_suspend,
+	.resume		= pl011_resume,
+#endif
 };
 
 static int __init pl011_init(void)
-- 
GitLab


From 35c9221acb133ecc9abd701a1fb6fa909d177a77 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 21 Aug 2009 07:07:46 +0100
Subject: [PATCH 244/257] ARM: 5682/1: Add cpu.c and dev.c and modify some
 files of w90p910 platform

Add the cpu.c and dev.c and modify w90p910 platform
to apply to use the common API(provided by cpu.c and dev.c)
at the same time, I renamed all w90x900 to nuc900 in every
c file of w90x900 platform and touchscreen's driver name.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Makefile                |   8 +-
 arch/arm/mach-w90x900/clksel.c                |  12 +-
 arch/arm/mach-w90x900/clock.c                 |   4 +-
 arch/arm/mach-w90x900/clock.h                 |   8 +-
 arch/arm/mach-w90x900/{w90p910.c => cpu.c}    | 122 +++---
 arch/arm/mach-w90x900/cpu.h                   |  50 +--
 arch/arm/mach-w90x900/dev.c                   | 389 +++++++++++++++++
 arch/arm/mach-w90x900/gpio.c                  |  78 ++--
 arch/arm/mach-w90x900/irq.c                   |  30 +-
 arch/arm/mach-w90x900/mach-nuc910evb.c        |  44 ++
 arch/arm/mach-w90x900/mach-w90p910evb.c       | 407 ------------------
 .../arm/mach-w90x900/{mfp-w90p910.c => mfp.c} |  38 +-
 arch/arm/mach-w90x900/nuc910.c                |  60 +++
 arch/arm/mach-w90x900/nuc910.h                |  28 ++
 arch/arm/mach-w90x900/time.c                  |  70 +--
 drivers/input/touchscreen/w90p910_ts.c        |   4 +-
 16 files changed, 727 insertions(+), 625 deletions(-)
 rename arch/arm/mach-w90x900/{w90p910.c => cpu.c} (53%)
 create mode 100644 arch/arm/mach-w90x900/dev.c
 create mode 100644 arch/arm/mach-w90x900/mach-nuc910evb.c
 delete mode 100644 arch/arm/mach-w90x900/mach-w90p910evb.c
 rename arch/arm/mach-w90x900/{mfp-w90p910.c => mfp.c} (77%)
 create mode 100644 arch/arm/mach-w90x900/nuc910.c
 create mode 100644 arch/arm/mach-w90x900/nuc910.h

diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index 3ccd625455c..e38aa328e60 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -4,12 +4,12 @@
 
 # Object file lists.
 
-obj-y				:= irq.o time.o mfp-w90p910.o gpio.o clock.o
-obj-y				+= clksel.o
+obj-y				:= irq.o time.o mfp.o gpio.o clock.o
+obj-y				+= clksel.o dev.o cpu.o
 # W90X900 CPU support files
 
-obj-$(CONFIG_CPU_W90P910)	+= w90p910.o
+obj-$(CONFIG_CPU_W90P910)	+= nuc910.o
 
 # machine support
 
-obj-$(CONFIG_MACH_W90P910EVB)	+= mach-w90p910evb.o
+obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c
index 5a77eb91cb1..3de4a5211c3 100644
--- a/arch/arm/mach-w90x900/clksel.c
+++ b/arch/arm/mach-w90x900/clksel.c
@@ -42,13 +42,13 @@ static void clock_source_select(const char *dev_id, unsigned int clkval)
 
 	clksel = __raw_readl(REG_CLKSEL);
 
-	if (strcmp(dev_id, "w90p910-ms") == 0)
+	if (strcmp(dev_id, "nuc900-ms") == 0)
 		offset = MSOFFSET;
-	else if (strcmp(dev_id, "w90p910-atapi") == 0)
+	else if (strcmp(dev_id, "nuc900-atapi") == 0)
 		offset = ATAOFFSET;
-	else if (strcmp(dev_id, "w90p910-lcd") == 0)
+	else if (strcmp(dev_id, "nuc900-lcd") == 0)
 		offset = LCDOFFSET;
-	else if (strcmp(dev_id, "w90p910-audio") == 0)
+	else if (strcmp(dev_id, "nuc900-audio") == 0)
 		offset = AUDOFFSET;
 	else
 		offset = CPUOFFSET;
@@ -59,7 +59,7 @@ static void clock_source_select(const char *dev_id, unsigned int clkval)
 	__raw_writel(clksel, REG_CLKSEL);
 }
 
-void w90p910_clock_source(struct device *dev, unsigned char *src)
+void nuc900_clock_source(struct device *dev, unsigned char *src)
 {
 	unsigned int clkval;
 	const char *dev_id;
@@ -87,5 +87,5 @@ void w90p910_clock_source(struct device *dev, unsigned char *src)
 
 	mutex_unlock(&clksel_sem);
 }
-EXPORT_SYMBOL(w90p910_clock_source);
+EXPORT_SYMBOL(nuc900_clock_source);
 
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index 70b67109637..b785994bab0 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -61,7 +61,7 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-void w90x900_clk_enable(struct clk *clk, int enable)
+void nuc900_clk_enable(struct clk *clk, int enable)
 {
 	unsigned int clocks = clk->cken;
 	unsigned long clken;
@@ -76,7 +76,7 @@ void w90x900_clk_enable(struct clk *clk, int enable)
 	__raw_writel(clken, W90X900_VA_CLKPWR);
 }
 
-void w90x900_subclk_enable(struct clk *clk, int enable)
+void nuc900_subclk_enable(struct clk *clk, int enable)
 {
 	unsigned int clocks = clk->cken;
 	unsigned long clken;
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index d2f0e50a70b..f5816a06eed 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -12,8 +12,8 @@
 
 #include <asm/clkdev.h>
 
-void w90x900_clk_enable(struct clk *clk, int enable);
-void w90x900_subclk_enable(struct clk *clk, int enable);
+void nuc900_clk_enable(struct clk *clk, int enable);
+void nuc900_subclk_enable(struct clk *clk, int enable);
 void clks_register(struct clk_lookup *clks, size_t num);
 
 struct clk {
@@ -24,13 +24,13 @@ struct clk {
 
 #define DEFINE_CLK(_name, _ctrlbit)			\
 struct clk clk_##_name = {				\
-		.enable	= w90x900_clk_enable,		\
+		.enable	= nuc900_clk_enable,		\
 		.cken	= (1 << _ctrlbit),		\
 	}
 
 #define DEFINE_SUBCLK(_name, _ctrlbit)			\
 struct clk clk_##_name = {				\
-		.enable	= w90x900_subclk_enable,	\
+		.enable	= nuc900_subclk_enable,	\
 		.cken	= (1 << _ctrlbit),		\
 	}
 
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/cpu.c
similarity index 53%
rename from arch/arm/mach-w90x900/w90p910.c
rename to arch/arm/mach-w90x900/cpu.c
index d33723b69d1..921cef991bf 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -1,13 +1,11 @@
 /*
- * linux/arch/arm/mach-w90x900/w90p910.c
+ * linux/arch/arm/mach-w90x900/cpu.c
  *
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
+ * Copyright (c) 2009 Nuvoton corporation.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
- * W90P910 cpu support
+ * NUC900 series cpu common support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -41,19 +39,12 @@
 
 /* Initial IO mappings */
 
-static struct map_desc w90p910_iodesc[] __initdata = {
+static struct map_desc nuc900_iodesc[] __initdata = {
 	IODESC_ENT(IRQ),
 	IODESC_ENT(GCR),
 	IODESC_ENT(UART),
 	IODESC_ENT(TIMER),
 	IODESC_ENT(EBI),
-	IODESC_ENT(USBEHCIHOST),
-	IODESC_ENT(USBOHCIHOST),
-	IODESC_ENT(ADC),
-	IODESC_ENT(RTC),
-	IODESC_ENT(KPI),
-	IODESC_ENT(USBDEV),
-	/*IODESC_ENT(LCD),*/
 };
 
 /* Initial clock declarations. */
@@ -78,58 +69,45 @@ static DEFINE_CLK(adc, 28);
 static DEFINE_CLK(usi, 29);
 static DEFINE_CLK(ext, 0);
 
-static struct clk_lookup w90p910_clkregs[] = {
-	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
-	DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
-	DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
-	DEF_CLKLOOK(&clk_ms, "w90p910-fmi", "MS"),
-	DEF_CLKLOOK(&clk_sd, "w90p910-fmi", "SD"),
-	DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
-	DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
-	DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
-	DEF_CLKLOOK(&clk_rmii, "w90p910-emc", "RMII"),
-	DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
-	DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
-	DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
-	DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
-	DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
-	DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
-	DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
-	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
-	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
-	DEF_CLKLOOK(&clk_usi, "w90p910-spi", NULL),
+static struct clk_lookup nuc900_clkregs[] = {
+	DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
+	DEF_CLKLOOK(&clk_audio, "nuc900-audio", NULL),
+	DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL),
+	DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"),
+	DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"),
+	DEF_CLKLOOK(&clk_dmac, "nuc900-dmac", NULL),
+	DEF_CLKLOOK(&clk_atapi, "nuc900-atapi", NULL),
+	DEF_CLKLOOK(&clk_emc, "nuc900-emc", NULL),
+	DEF_CLKLOOK(&clk_rmii, "nuc900-emc", "RMII"),
+	DEF_CLKLOOK(&clk_usbd, "nuc900-usbd", NULL),
+	DEF_CLKLOOK(&clk_usbh, "nuc900-usbh", NULL),
+	DEF_CLKLOOK(&clk_g2d, "nuc900-g2d", NULL),
+	DEF_CLKLOOK(&clk_pwm, "nuc900-pwm", NULL),
+	DEF_CLKLOOK(&clk_ps2, "nuc900-ps2", NULL),
+	DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
+	DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
+	DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
+	DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+	DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
 	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
 };
 
 /* Initial serial platform data */
 
-struct plat_serial8250_port w90p910_uart_data[] = {
-	W90X900_8250PORT(UART0),
+struct plat_serial8250_port nuc900_uart_data[] = {
+	NUC900_8250PORT(UART0),
 };
 
-struct platform_device w90p910_serial_device = {
+struct platform_device nuc900_serial_device = {
 	.name			= "serial8250",
 	.id			= PLAT8250_DEV_PLATFORM,
 	.dev			= {
-		.platform_data	= w90p910_uart_data,
+		.platform_data	= nuc900_uart_data,
 	},
 };
 
-/*Init W90P910 evb io*/
-
-void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
-{
-	unsigned long idcode = 0x0;
-
-	iotable_init(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-
-	idcode = __raw_readl(W90X900PDID);
-	if (idcode != W90P910_CPUID)
-		printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
-}
-
-/*Set W90P910 cpu frequence*/
-static int __init w90p910_set_clkval(unsigned int cpufreq)
+/*Set NUC900 series cpu frequence*/
+static int __init nuc900_set_clkval(unsigned int cpufreq)
 {
 	unsigned int pllclk, ahbclk, apbclk, val;
 
@@ -178,7 +156,7 @@ static int __init w90p910_set_clkval(unsigned int cpufreq)
 
 	return 	0;
 }
-static int __init w90p910_set_cpufreq(char *str)
+static int __init nuc900_set_cpufreq(char *str)
 {
 	unsigned long cpufreq, val;
 
@@ -187,9 +165,9 @@ static int __init w90p910_set_cpufreq(char *str)
 
 	strict_strtoul(str, 0, &cpufreq);
 
-	w90p910_clock_source(NULL, "ext");
+	nuc900_clock_source(NULL, "ext");
 
-	w90p910_set_clkval(cpufreq);
+	nuc900_set_clkval(cpufreq);
 
 	mdelay(1);
 
@@ -198,27 +176,37 @@ static int __init w90p910_set_cpufreq(char *str)
 	val |= DEFAULTSKEW;
 	__raw_writel(val, REG_CKSKEW);
 
-	w90p910_clock_source(NULL, "pll0");
+	nuc900_clock_source(NULL, "pll0");
 
 	return 1;
 }
 
-__setup("cpufreq=", w90p910_set_cpufreq);
+__setup("cpufreq=", nuc900_set_cpufreq);
 
-/*Init W90P910 clock*/
+/*Init NUC900 evb io*/
 
-void __init w90p910_init_clocks(void)
+void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size)
 {
-	clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
-}
+	unsigned long idcode = 0x0;
 
-static int __init w90p910_init_cpu(void)
-{
-	return 0;
+	iotable_init(mach_desc, mach_size);
+	iotable_init(nuc900_iodesc, ARRAY_SIZE(nuc900_iodesc));
+
+	idcode = __raw_readl(NUC900PDID);
+	if (idcode == NUC910_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
+	else if (idcode == NUC920_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC920\n", idcode);
+	else if (idcode == NUC950_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC950\n", idcode);
+	else if (idcode == NUC960_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC960\n", idcode);
 }
 
-static int __init w90x900_arch_init(void)
+/*Init NUC900 clock*/
+
+void __init nuc900_init_clocks(void)
 {
-	return w90p910_init_cpu();
+	clks_register(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
 }
-arch_initcall(w90x900_arch_init);
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index ddde959d898..4d58ba164e2 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -6,7 +6,7 @@
  * Copyright (c) 2008 Nuvoton technology corporation
  * All rights reserved.
  *
- * Header file for W90X900 CPU support
+ * Header file for NUC900 CPU support
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -24,30 +24,7 @@
        .type    = MT_DEVICE,                           \
 }
 
-/*Cpu identifier register*/
-
-#define W90X900PDID	W90X900_VA_GCR
-#define W90P910_CPUID	0x02900910
-#define W90P920_CPUID	0x02900920
-#define W90P950_CPUID	0x02900950
-#define W90N960_CPUID	0x02900960
-
-struct w90x900_uartcfg;
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void w90x900_init_irq(void);
-extern void w90p910_init_io(struct map_desc *mach_desc, int size);
-extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(void);
-extern void w90p910_map_io(struct map_desc *mach_desc, int size);
-extern struct platform_device w90p910_serial_device;
-extern struct sys_timer w90x900_timer;
-extern void w90p910_clock_source(struct device *dev, unsigned char *src);
-
-#define W90X900_8250PORT(name)					\
+#define NUC900_8250PORT(name)					\
 {								\
 	.membase	= name##_BA,				\
 	.mapbase	= name##_PA,				\
@@ -57,3 +34,26 @@ extern void w90p910_clock_source(struct device *dev, unsigned char *src);
 	.iotype		= UPIO_MEM,				\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,	\
 }
+
+/*Cpu identifier register*/
+
+#define NUC900PDID	W90X900_VA_GCR
+#define NUC910_CPUID	0x02900910
+#define NUC920_CPUID	0x02900920
+#define NUC950_CPUID	0x02900950
+#define NUC960_CPUID	0x02900960
+
+/* extern file from cpu.c */
+
+extern void nuc900_clock_source(struct device *dev, unsigned char *src);
+extern void nuc900_init_clocks(void);
+extern void nuc900_map_io(struct map_desc *mach_desc, int mach_size);
+extern void nuc900_board_init(struct platform_device **device, int size);
+
+/* for either public between 910 and 920, or between 920 and 950 */
+
+extern struct platform_device nuc900_serial_device;
+extern struct platform_device nuc900_device_fmi;
+extern struct platform_device nuc900_device_kpi;
+extern struct platform_device nuc900_device_rtc;
+extern struct platform_device nuc900_device_ts;
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
new file mode 100644
index 00000000000..2a6f98de48d
--- /dev/null
+++ b/arch/arm/mach-w90x900/dev.c
@@ -0,0 +1,389 @@
+/*
+ * linux/arch/arm/mach-w90x900/dev.c
+ *
+ * Copyright (C) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+
+#include "cpu.h"
+
+/*NUC900 evb norflash driver data */
+
+#define NUC900_FLASH_BASE	0xA0000000
+#define NUC900_FLASH_SIZE	0x400000
+#define SPIOFFSET		0x200
+#define SPIOREG_SIZE		0x100
+
+static struct mtd_partition nuc900_flash_partitions[] = {
+	{
+		.name	=	"NOR Partition 1 for kernel (960K)",
+		.size	=	0xF0000,
+		.offset	=	0x10000,
+	},
+	{
+		.name	=	"NOR Partition 2 for image (1M)",
+		.size	=	0x100000,
+		.offset	=	0x100000,
+	},
+	{
+		.name	=	"NOR Partition 3 for user (2M)",
+		.size	=	0x200000,
+		.offset	=	0x00200000,
+	}
+};
+
+static struct physmap_flash_data nuc900_flash_data = {
+	.width		=	2,
+	.parts		=	nuc900_flash_partitions,
+	.nr_parts	=	ARRAY_SIZE(nuc900_flash_partitions),
+};
+
+static struct resource nuc900_flash_resources[] = {
+	{
+		.start	=	NUC900_FLASH_BASE,
+		.end	=	NUC900_FLASH_BASE + NUC900_FLASH_SIZE - 1,
+		.flags	=	IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nuc900_flash_device = {
+	.name		=	"physmap-flash",
+	.id		=	0,
+	.dev		= {
+				.platform_data = &nuc900_flash_data,
+			},
+	.resource	=	nuc900_flash_resources,
+	.num_resources	=	ARRAY_SIZE(nuc900_flash_resources),
+};
+
+/* USB EHCI Host Controller */
+
+static struct resource nuc900_usb_ehci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBEHCIHOST,
+		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+static struct platform_device nuc900_device_usb_ehci = {
+	.name		  = "nuc900-ehci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(nuc900_usb_ehci_resource),
+	.resource	  = nuc900_usb_ehci_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_usb_ehci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* USB OHCI Host Controller */
+
+static struct resource nuc900_usb_ohci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBOHCIHOST,
+		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_usb_ohci_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_usb_ohci = {
+	.name		  = "nuc900-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(nuc900_usb_ohci_resource),
+	.resource	  = nuc900_usb_ohci_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_usb_ohci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* USB Device (Gadget)*/
+
+static struct resource nuc900_usbgadget_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBDEV,
+		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBD,
+		.end   = IRQ_USBD,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_usbgadget = {
+	.name		= "nuc900-usbgadget",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_usbgadget_resource),
+	.resource	= nuc900_usbgadget_resource,
+};
+
+/* MAC device */
+
+static struct resource nuc900_emc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_EMC,
+		.end   = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_EMCTX,
+		.end   = IRQ_EMCTX,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_EMCRX,
+		.end   = IRQ_EMCRX,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_emc_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_emc = {
+	.name		= "nuc900-emc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_emc_resource),
+	.resource	= nuc900_emc_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_emc_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* SPI device */
+
+static struct resource nuc900_spi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_I2C + SPIOFFSET,
+		.end   = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_SSP,
+		.end   = IRQ_SSP,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_spi = {
+	.name		= "nuc900-spi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_spi_resource),
+	.resource	= nuc900_spi_resource,
+};
+
+/* spi device, spi flash info */
+
+static struct mtd_partition nuc900_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x0100000,
+		.offset = 0,
+	},
+};
+
+static struct flash_platform_data nuc900_spi_flash_data = {
+	.name = "m25p80",
+	.parts =  nuc900_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(nuc900_spi_flash_partitions),
+	.type = "w25x16",
+};
+
+static struct spi_board_info nuc900_spi_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &nuc900_spi_flash_data,
+		.mode = SPI_MODE_0,
+	},
+};
+
+/* WDT Device */
+
+static struct resource nuc900_wdt_resource[] = {
+	[0] = {
+		.start = W90X900_PA_TIMER,
+		.end   = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_WDT,
+		.end   = IRQ_WDT,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_wdt = {
+	.name		= "nuc900-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_wdt_resource),
+	.resource	= nuc900_wdt_resource,
+};
+
+/*
+ * public device definition between 910 and 920, or 910
+ * and 950 or 950 and 960...,their dev platform register
+ * should be in specific file such as nuc950, nuc960 c
+ * files rather than the public dev.c file here. so the
+ * corresponding platform_device definition should not be
+ * static.
+*/
+
+/* RTC controller*/
+
+static struct resource nuc900_rtc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_RTC,
+		.end   = W90X900_PA_RTC + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTC,
+		.end   = IRQ_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device nuc900_device_rtc = {
+	.name		= "nuc900-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_rtc_resource),
+	.resource	= nuc900_rtc_resource,
+};
+
+/*TouchScreen controller*/
+
+static struct resource nuc900_ts_resource[] = {
+	[0] = {
+		.start = W90X900_PA_ADC,
+		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device nuc900_device_ts = {
+	.name		= "nuc900-ts",
+	.id		= -1,
+	.resource	= nuc900_ts_resource,
+	.num_resources	= ARRAY_SIZE(nuc900_ts_resource),
+};
+
+/* FMI Device */
+
+static struct resource nuc900_fmi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_FMI,
+		.end   = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_FMI,
+		.end   = IRQ_FMI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device nuc900_device_fmi = {
+	.name		= "nuc900-fmi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_fmi_resource),
+	.resource	= nuc900_fmi_resource,
+};
+
+/* KPI controller*/
+
+static struct resource nuc900_kpi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_KPI,
+		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_KPI,
+		.end   = IRQ_KPI,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device nuc900_device_kpi = {
+	.name		= "nuc900-kpi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_kpi_resource),
+	.resource	= nuc900_kpi_resource,
+};
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *nuc900_public_dev[] __initdata = {
+	&nuc900_serial_device,
+	&nuc900_flash_device,
+	&nuc900_device_usb_ehci,
+	&nuc900_device_usb_ohci,
+	&nuc900_device_usbgadget,
+	&nuc900_device_emc,
+	&nuc900_device_spi,
+	&nuc900_device_wdt,
+};
+
+/* Provide adding specific CPU platform devices API */
+
+void __init nuc900_board_init(struct platform_device **device, int size)
+{
+	platform_add_devices(device, size);
+	platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
+	spi_register_board_info(nuc900_spi_board_info,
+					ARRAY_SIZE(nuc900_spi_board_info));
+}
+
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
index c72e0dfa182..ba05aec7ea4 100644
--- a/arch/arm/mach-w90x900/gpio.c
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -1,7 +1,7 @@
 /*
- * linux/arch/arm/mach-w90p910/gpio.c
+ * linux/arch/arm/mach-w90x900/gpio.c
  *
- * Generic w90p910 GPIO handling
+ * Generic nuc900 GPIO handling
  *
  *  Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -30,31 +30,31 @@
 #define GPIO_IN			(0x0C)
 #define GROUPINERV		(0x10)
 #define GPIO_GPIO(Nb)		(0x00000001 << (Nb))
-#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip)
 
-#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio)			\
+#define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio)			\
 	{								\
 		.chip = {						\
 			.label		  = name,			\
-			.direction_input  = w90p910_dir_input,		\
-			.direction_output = w90p910_dir_output,		\
-			.get		  = w90p910_gpio_get,		\
-			.set		  = w90p910_gpio_set,		\
+			.direction_input  = nuc900_dir_input,		\
+			.direction_output = nuc900_dir_output,		\
+			.get		  = nuc900_gpio_get,		\
+			.set		  = nuc900_gpio_set,		\
 			.base		  = base_gpio,			\
 			.ngpio		  = nr_gpio,			\
 		}							\
 	}
 
-struct w90p910_gpio_chip {
+struct nuc900_gpio_chip {
 	struct gpio_chip	chip;
 	void __iomem		*regbase;	/* Base of group register*/
 	spinlock_t 		gpio_lock;
 };
 
-static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_IN;
 	unsigned int regval;
 
 	regval = __raw_readl(pio);
@@ -63,14 +63,14 @@ static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return (regval != 0);
 }
 
-static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 
@@ -81,36 +81,36 @@ static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 
 	__raw_writel(regval, pio);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 }
 
-static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 	regval &= ~GPIO_GPIO(offset);
 	__raw_writel(regval, pio);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 
 	return 0;
 }
 
-static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT;
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 	regval |= GPIO_GPIO(offset);
@@ -125,28 +125,28 @@ static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
 
 	__raw_writel(regval, outreg);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 
 	return 0;
 }
 
-static struct w90p910_gpio_chip w90p910_gpio[] = {
-	W90P910_GPIO_CHIP("GROUPC", 0, 16),
-	W90P910_GPIO_CHIP("GROUPD", 16, 10),
-	W90P910_GPIO_CHIP("GROUPE", 26, 14),
-	W90P910_GPIO_CHIP("GROUPF", 40, 10),
-	W90P910_GPIO_CHIP("GROUPG", 50, 17),
-	W90P910_GPIO_CHIP("GROUPH", 67, 8),
-	W90P910_GPIO_CHIP("GROUPI", 75, 17),
+static struct nuc900_gpio_chip nuc900_gpio[] = {
+	NUC900_GPIO_CHIP("GROUPC", 0, 16),
+	NUC900_GPIO_CHIP("GROUPD", 16, 10),
+	NUC900_GPIO_CHIP("GROUPE", 26, 14),
+	NUC900_GPIO_CHIP("GROUPF", 40, 10),
+	NUC900_GPIO_CHIP("GROUPG", 50, 17),
+	NUC900_GPIO_CHIP("GROUPH", 67, 8),
+	NUC900_GPIO_CHIP("GROUPI", 75, 17),
 };
 
-void __init w90p910_init_gpio(int nr_group)
+void __init nuc900_init_gpio(int nr_group)
 {
 	unsigned	i;
-	struct w90p910_gpio_chip *gpio_chip;
+	struct nuc900_gpio_chip *gpio_chip;
 
 	for (i = 0; i < nr_group; i++) {
-		gpio_chip = &w90p910_gpio[i];
+		gpio_chip = &nuc900_gpio[i];
 		spin_lock_init(&gpio_chip->gpio_lock);
 		gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
 		gpiochip_add(&gpio_chip->chip);
diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index a296c9b81d2..0ce9d8e867e 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -36,13 +36,13 @@ struct group_irq {
 
 static DEFINE_SPINLOCK(groupirq_lock);
 
-#define DEFINE_GROUP(_name, _ctrlbit, _num)			\
-struct group_irq group_##_name = {				\
-		.enable		= w90x900_group_enable,		\
-		.gpen		= ((2 ^ _num) - 1) << _ctrlbit,	\
+#define DEFINE_GROUP(_name, _ctrlbit, _num)				\
+struct group_irq group_##_name = {					\
+		.enable		= nuc900_group_enable,			\
+		.gpen		= ((1 << _num) - 1) << _ctrlbit,	\
 	}
 
-static void w90x900_group_enable(struct group_irq *gpirq, int enable);
+static void nuc900_group_enable(struct group_irq *gpirq, int enable);
 
 static DEFINE_GROUP(nirq0, 0, 4);
 static DEFINE_GROUP(nirq1, 4, 4);
@@ -77,7 +77,7 @@ static void group_irq_disable(struct group_irq *group_irq)
 	spin_unlock_irqrestore(&groupirq_lock, flags);
 }
 
-static void w90x900_group_enable(struct group_irq *gpirq, int enable)
+static void nuc900_group_enable(struct group_irq *gpirq, int enable)
 {
 	unsigned int groupen = gpirq->gpen;
 	unsigned long regval;
@@ -92,7 +92,7 @@ static void w90x900_group_enable(struct group_irq *gpirq, int enable)
 	__raw_writel(regval, REG_AIC_GEN);
 }
 
-static void w90x900_irq_mask(unsigned int irq)
+static void nuc900_irq_mask(unsigned int irq)
 {
 	struct group_irq *group_irq;
 
@@ -143,12 +143,12 @@ static void w90x900_irq_mask(unsigned int irq)
  * to REG_AIC_EOSCR for ACK
  */
 
-static void w90x900_irq_ack(unsigned int irq)
+static void nuc900_irq_ack(unsigned int irq)
 {
 	__raw_writel(0x01, REG_AIC_EOSCR);
 }
 
-static void w90x900_irq_unmask(unsigned int irq)
+static void nuc900_irq_unmask(unsigned int irq)
 {
 	struct group_irq *group_irq;
 
@@ -194,20 +194,20 @@ static void w90x900_irq_unmask(unsigned int irq)
 		group_irq_enable(group_irq);
 }
 
-static struct irq_chip w90x900_irq_chip = {
-	.ack	   = w90x900_irq_ack,
-	.mask	   = w90x900_irq_mask,
-	.unmask	   = w90x900_irq_unmask,
+static struct irq_chip nuc900_irq_chip = {
+	.ack	   = nuc900_irq_ack,
+	.mask	   = nuc900_irq_mask,
+	.unmask	   = nuc900_irq_unmask,
 };
 
-void __init w90x900_init_irq(void)
+void __init nuc900_init_irq(void)
 {
 	int irqno;
 
 	__raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
 
 	for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
-		set_irq_chip(irqno, &w90x900_irq_chip);
+		set_irq_chip(irqno, &nuc900_irq_chip);
 		set_irq_handler(irqno, handle_level_irq);
 		set_irq_flags(irqno, IRQF_VALID);
 	}
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
new file mode 100644
index 00000000000..ec05bda946f
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc910.h"
+
+static void __init nuc910evb_map_io(void)
+{
+	nuc910_map_io();
+	nuc910_init_clocks();
+}
+
+static void __init nuc910evb_init(void)
+{
+	nuc910_board_init();
+}
+
+MACHINE_START(W90P910EVB, "W90P910EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc910evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc910evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
deleted file mode 100644
index 117578aed68..00000000000
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-w90p910evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-serial.h>
-#include <mach/map.h>
-
-#include "cpu.h"
-/*w90p910 evb norflash driver data */
-
-#define W90P910_FLASH_BASE	0xA0000000
-#define W90P910_FLASH_SIZE	0x400000
-#define SPIOFFSET		0x200
-#define SPIOREG_SIZE		0x100
-
-static struct mtd_partition w90p910_flash_partitions[] = {
-	{
-		.name	=	"NOR Partition 1 for kernel (960K)",
-		.size	=	0xF0000,
-		.offset	=	0x10000,
-	},
-	{
-		.name	=	"NOR Partition 2 for image (1M)",
-		.size	=	0x100000,
-		.offset	=	0x100000,
-	},
-	{
-		.name	=	"NOR Partition 3 for user (2M)",
-		.size	=	0x200000,
-		.offset	=	0x00200000,
-	}
-};
-
-static struct physmap_flash_data w90p910_flash_data = {
-	.width		=	2,
-	.parts		=	w90p910_flash_partitions,
-	.nr_parts	=	ARRAY_SIZE(w90p910_flash_partitions),
-};
-
-static struct resource w90p910_flash_resources[] = {
-	{
-		.start	=	W90P910_FLASH_BASE,
-		.end	=	W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1,
-		.flags	=	IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device w90p910_flash_device = {
-	.name		=	"physmap-flash",
-	.id		=	0,
-	.dev		= {
-				.platform_data = &w90p910_flash_data,
-			},
-	.resource	=	w90p910_flash_resources,
-	.num_resources	=	ARRAY_SIZE(w90p910_flash_resources),
-};
-
-/* USB EHCI Host Controller */
-
-static struct resource w90x900_usb_ehci_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBEHCIHOST,
-		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
-
-struct platform_device w90x900_device_usb_ehci = {
-	.name		  = "w90x900-ehci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(w90x900_usb_ehci_resource),
-	.resource	  = w90x900_usb_ehci_resource,
-	.dev              = {
-		.dma_mask = &w90x900_device_usb_ehci_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-EXPORT_SYMBOL(w90x900_device_usb_ehci);
-
-/* USB OHCI Host Controller */
-
-static struct resource w90x900_usb_ohci_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBOHCIHOST,
-		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
-struct platform_device w90x900_device_usb_ohci = {
-	.name		  = "w90x900-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(w90x900_usb_ohci_resource),
-	.resource	  = w90x900_usb_ohci_resource,
-	.dev              = {
-		.dma_mask = &w90x900_device_usb_ohci_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-EXPORT_SYMBOL(w90x900_device_usb_ohci);
-
-/*TouchScreen controller*/
-
-static struct resource w90x900_ts_resource[] = {
-	[0] = {
-		.start = W90X900_PA_ADC,
-		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_ADC,
-		.end   = IRQ_ADC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device w90x900_device_ts = {
-	.name		= "w90x900-ts",
-	.id		= -1,
-	.resource	= w90x900_ts_resource,
-	.num_resources	= ARRAY_SIZE(w90x900_ts_resource),
-};
-EXPORT_SYMBOL(w90x900_device_ts);
-
-/* RTC controller*/
-
-static struct resource w90x900_rtc_resource[] = {
-	[0] = {
-		.start = W90X900_PA_RTC,
-		.end   = W90X900_PA_RTC + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_RTC,
-		.end   = IRQ_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device w90x900_device_rtc = {
-	.name		= "w90x900-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_rtc_resource),
-	.resource	= w90x900_rtc_resource,
-};
-EXPORT_SYMBOL(w90x900_device_rtc);
-
-/* KPI controller*/
-
-static struct resource w90x900_kpi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_KPI,
-		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_KPI,
-		.end   = IRQ_KPI,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device w90x900_device_kpi = {
-	.name		= "w90x900-kpi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_kpi_resource),
-	.resource	= w90x900_kpi_resource,
-};
-EXPORT_SYMBOL(w90x900_device_kpi);
-
-/* USB Device (Gadget)*/
-
-static struct resource w90x900_usbgadget_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBDEV,
-		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBD,
-		.end   = IRQ_USBD,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device w90x900_device_usbgadget = {
-	.name		= "w90x900-usbgadget",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_usbgadget_resource),
-	.resource	= w90x900_usbgadget_resource,
-};
-EXPORT_SYMBOL(w90x900_device_usbgadget);
-
-/* FMI Device */
-
-static struct resource w90p910_fmi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_FMI,
-		.end   = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_FMI,
-		.end   = IRQ_FMI,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device w90p910_device_fmi = {
-	.name		= "w90p910-fmi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90p910_fmi_resource),
-	.resource	= w90p910_fmi_resource,
-};
-
-/* MAC device */
-
-static struct resource w90x900_emc_resource[] = {
-	[0] = {
-		.start = W90X900_PA_EMC,
-		.end   = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_EMCTX,
-		.end   = IRQ_EMCTX,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_EMCRX,
-		.end   = IRQ_EMCRX,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 w90x900_device_emc_dmamask = 0xffffffffUL;
-static struct platform_device w90p910_device_emc = {
-	.name		= "w90p910-emc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_emc_resource),
-	.resource	= w90x900_emc_resource,
-	.dev              = {
-		.dma_mask = &w90x900_device_emc_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-/* SPI device */
-
-static struct resource w90p910_spi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_I2C + SPIOFFSET,
-		.end   = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_SSP,
-		.end   = IRQ_SSP,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device w90p910_device_spi = {
-	.name		= "w90p910-spi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90p910_spi_resource),
-	.resource	= w90p910_spi_resource,
-};
-
-/* spi device, spi flash info */
-
-static struct mtd_partition w90p910_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x0100000,
-		.offset = 0,
-	},
-};
-
-static struct flash_platform_data w90p910_spi_flash_data = {
-	.name = "m25p80",
-	.parts =  w90p910_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(w90p910_spi_flash_partitions),
-	.type = "w25x16",
-};
-
-static struct spi_board_info w90p910_spi_board_info[] __initdata = {
-	{
-		.modalias = "m25p80",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.platform_data = &w90p910_spi_flash_data,
-		.mode = SPI_MODE_0,
-	},
-};
-
-/* WDT Device */
-
-static struct resource w90p910_wdt_resource[] = {
-	[0] = {
-		.start = W90X900_PA_TIMER,
-		.end   = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_WDT,
-		.end   = IRQ_WDT,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device w90p910_device_wdt = {
-	.name		= "w90p910-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90p910_wdt_resource),
-	.resource	= w90p910_wdt_resource,
-};
-
-static struct map_desc w90p910_iodesc[] __initdata = {
-};
-
-/*Here should be your evb resourse,such as LCD*/
-
-static struct platform_device *w90p910evb_dev[] __initdata = {
-	&w90p910_serial_device,
-	&w90p910_flash_device,
-	&w90x900_device_usb_ehci,
-	&w90x900_device_usb_ohci,
-	&w90x900_device_ts,
-	&w90x900_device_rtc,
-	&w90x900_device_kpi,
-	&w90x900_device_usbgadget,
-	&w90p910_device_fmi,
-	&w90p910_device_emc,
-	&w90p910_device_spi,
-	&w90p910_device_wdt,
-};
-
-static void __init w90p910evb_map_io(void)
-{
-	w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-	w90p910_init_clocks();
-}
-
-static void __init w90p910evb_init(void)
-{
-	platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
-	spi_register_board_info(w90p910_spi_board_info,
-					ARRAY_SIZE(w90p910_spi_board_info));
-}
-
-MACHINE_START(W90P910EVB, "W90P910EVB")
-	/* Maintainer: Wan ZongShun */
-	.phys_io	= W90X900_PA_UART,
-	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= 0,
-	.map_io		= w90p910evb_map_io,
-	.init_irq	= w90x900_init_irq,
-	.init_machine	= w90p910evb_init,
-	.timer		= &w90x900_timer,
-MACHINE_END
diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp.c
similarity index 77%
rename from arch/arm/mach-w90x900/mfp-w90p910.c
rename to arch/arm/mach-w90x900/mfp.c
index 4533098a0ee..a47dc9a708e 100644
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ b/arch/arm/mach-w90x900/mfp.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-w90x900/mfp-w90p910.c
+ * linux/arch/arm/mach-w90x900/mfp.c
  *
  * Copyright (c) 2008 Nuvoton technology corporation
  *
@@ -55,7 +55,7 @@ void mfp_set_groupf(struct device *dev)
 
 	mfpen = __raw_readl(REG_MFSEL);
 
-	if (strcmp(dev_id, "w90p910-emc") == 0)
+	if (strcmp(dev_id, "nuc900-emc") == 0)
 		mfpen |= GPSELF;/*enable mac*/
 	else
 		mfpen &= ~GPSELF;/*GPIOF[9:0]*/
@@ -79,16 +79,16 @@ void mfp_set_groupc(struct device *dev)
 
 	mfpen = __raw_readl(REG_MFSEL);
 
-	if (strcmp(dev_id, "w90p910-lcd") == 0)
+	if (strcmp(dev_id, "nuc900-lcd") == 0)
 		mfpen |= GPSELC;/*enable lcd*/
-	else if (strcmp(dev_id, "w90p910-kpi") == 0) {
-			mfpen &= (~GPSELC);/*enable kpi*/
-			mfpen |= ENKPI;
-		} else if (strcmp(dev_id, "w90p910-nand") == 0) {
-				mfpen &= (~GPSELC);/*enable nand*/
-				mfpen |= ENNAND;
-			} else
-				mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+	else if (strcmp(dev_id, "nuc900-kpi") == 0) {
+		mfpen &= (~GPSELC);/*enable kpi*/
+		mfpen |= ENKPI;
+	} else if (strcmp(dev_id, "nuc900-nand") == 0) {
+		mfpen &= (~GPSELC);/*enable nand*/
+		mfpen |= ENNAND;
+	} else
+		mfpen &= (~GPSELC);/*GPIOC[14:0]*/
 
 	__raw_writel(mfpen, REG_MFSEL);
 
@@ -111,12 +111,12 @@ void mfp_set_groupi(struct device *dev)
 
 	mfpen &= ~GPSELEI1;/*default gpio16*/
 
-	if (strcmp(dev_id, "w90p910-wdog") == 0)
+	if (strcmp(dev_id, "nuc900-wdog") == 0)
 		mfpen |= GPSELEI1;/*enable wdog*/
-		else if (strcmp(dev_id, "w90p910-atapi") == 0)
-			mfpen |= GPSELEI0;/*enable atapi*/
-			else if (strcmp(dev_id, "w90p910-keypad") == 0)
-				mfpen &= ~GPSELEI0;/*enable keypad*/
+	else if (strcmp(dev_id, "nuc900-atapi") == 0)
+		mfpen |= GPSELEI0;/*enable atapi*/
+	else if (strcmp(dev_id, "nuc900-keypad") == 0)
+		mfpen &= ~GPSELEI0;/*enable keypad*/
 
 	__raw_writel(mfpen, REG_MFSEL);
 
@@ -137,13 +137,13 @@ void mfp_set_groupg(struct device *dev)
 
 	mfpen = __raw_readl(REG_MFSEL);
 
-	if (strcmp(dev_id, "w90p910-spi") == 0) {
+	if (strcmp(dev_id, "nuc900-spi") == 0) {
 		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
 		mfpen |= ENSPI;/*enable spi*/
-	} else if (strcmp(dev_id, "w90p910-i2c0") == 0) {
+	} else if (strcmp(dev_id, "nuc900-i2c0") == 0) {
 		mfpen &= ~(GPIOG0TO1);
 		mfpen |= ENI2C0;/*enable i2c0*/
-	} else if (strcmp(dev_id, "w90p910-i2c1") == 0) {
+	} else if (strcmp(dev_id, "nuc900-i2c1") == 0) {
 		mfpen &= ~(GPIOG2TO3);
 		mfpen |= ENI2C1;/*enable i2c1*/
 	} else {
diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c
new file mode 100644
index 00000000000..656f03b3b62
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.c
@@ -0,0 +1,60 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc910.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC910 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+#include "clock.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc910_dev[] __initdata = {
+	&nuc900_device_ts,
+	&nuc900_device_rtc,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc910evb_iodesc[] __initdata = {
+	IODESC_ENT(USBEHCIHOST),
+	IODESC_ENT(USBOHCIHOST),
+	IODESC_ENT(KPI),
+	IODESC_ENT(USBDEV),
+	IODESC_ENT(ADC),
+};
+
+/*Init NUC910 evb io*/
+
+void __init nuc910_map_io(void)
+{
+	nuc900_map_io(nuc910evb_iodesc, ARRAY_SIZE(nuc910evb_iodesc));
+}
+
+/*Init NUC910 clock*/
+
+void __init nuc910_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC910 board info*/
+
+void __init nuc910_board_init(void)
+{
+	nuc900_board_init(nuc910_dev, ARRAY_SIZE(nuc910_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h
new file mode 100644
index 00000000000..83e9ba5fc26
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc910.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc910.c */
+
+extern void nuc910_board_init(void);
+extern void nuc910_init_clocks(void);
+extern void nuc910_map_io(void);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 5e06770e601..4128af870b4 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -44,7 +44,7 @@
 
 unsigned int timer0_load;
 
-static void w90p910_clockevent_setmode(enum clock_event_mode mode,
+static void nuc900_clockevent_setmode(enum clock_event_mode mode,
 		struct clock_event_device *clk)
 {
 	unsigned int val;
@@ -71,7 +71,7 @@ static void w90p910_clockevent_setmode(enum clock_event_mode mode,
 	__raw_writel(val, REG_TCSR0);
 }
 
-static int w90p910_clockevent_setnextevent(unsigned long evt,
+static int nuc900_clockevent_setnextevent(unsigned long evt,
 		struct clock_event_device *clk)
 {
 	unsigned int val;
@@ -85,20 +85,20 @@ static int w90p910_clockevent_setnextevent(unsigned long evt,
 	return 0;
 }
 
-static struct clock_event_device w90p910_clockevent_device = {
-	.name		= "w90p910-timer0",
+static struct clock_event_device nuc900_clockevent_device = {
+	.name		= "nuc900-timer0",
 	.shift		= 32,
 	.features	= CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= w90p910_clockevent_setmode,
-	.set_next_event	= w90p910_clockevent_setnextevent,
+	.set_mode	= nuc900_clockevent_setmode,
+	.set_next_event	= nuc900_clockevent_setnextevent,
 	.rating		= 300,
 };
 
 /*IRQ handler for the timer*/
 
-static irqreturn_t w90p910_timer0_interrupt(int irq, void *dev_id)
+static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = &w90p910_clockevent_device;
+	struct clock_event_device *evt = &nuc900_clockevent_device;
 
 	__raw_writel(0x01, REG_TISR); /* clear TIF0 */
 
@@ -106,40 +106,40 @@ static irqreturn_t w90p910_timer0_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction w90p910_timer0_irq = {
-	.name		= "w90p910-timer0",
+static struct irqaction nuc900_timer0_irq = {
+	.name		= "nuc900-timer0",
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= w90p910_timer0_interrupt,
+	.handler	= nuc900_timer0_interrupt,
 };
 
-static void __init w90p910_clockevents_init(unsigned int rate)
+static void __init nuc900_clockevents_init(unsigned int rate)
 {
-	w90p910_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
-					w90p910_clockevent_device.shift);
-	w90p910_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
-					&w90p910_clockevent_device);
-	w90p910_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
-					&w90p910_clockevent_device);
-	w90p910_clockevent_device.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&w90p910_clockevent_device);
+	nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
+					nuc900_clockevent_device.shift);
+	nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
+					&nuc900_clockevent_device);
+	nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
+					&nuc900_clockevent_device);
+	nuc900_clockevent_device.cpumask = cpumask_of(0);
+
+	clockevents_register_device(&nuc900_clockevent_device);
 }
 
-static cycle_t w90p910_get_cycles(struct clocksource *cs)
+static cycle_t nuc900_get_cycles(struct clocksource *cs)
 {
 	return ~__raw_readl(REG_TDR1);
 }
 
-static struct clocksource clocksource_w90p910 = {
-	.name	= "w90p910-timer1",
+static struct clocksource clocksource_nuc900 = {
+	.name	= "nuc900-timer1",
 	.rating	= 200,
-	.read	= w90p910_get_cycles,
+	.read	= nuc900_get_cycles,
 	.mask	= CLOCKSOURCE_MASK(32),
 	.shift	= 20,
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init w90p910_clocksource_init(unsigned int rate)
+static void __init nuc900_clocksource_init(unsigned int rate)
 {
 	unsigned int val;
 
@@ -149,12 +149,12 @@ static void __init w90p910_clocksource_init(unsigned int rate)
 	val |= (COUNTEN | PERIOD);
 	__raw_writel(val, REG_TCSR1);
 
-	clocksource_w90p910.mult =
-		clocksource_khz2mult((rate / 1000), clocksource_w90p910.shift);
-	clocksource_register(&clocksource_w90p910);
+	clocksource_nuc900.mult =
+		clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift);
+	clocksource_register(&clocksource_nuc900);
 }
 
-static void __init w90p910_timer_init(void)
+static void __init nuc900_timer_init(void)
 {
 	struct clk *ck_ext = clk_get(NULL, "ext");
 	unsigned int	rate;
@@ -171,12 +171,12 @@ static void __init w90p910_timer_init(void)
 	__raw_writel(RESETINT, REG_TISR);
 	timer0_load = (rate / TICKS_PER_SEC);
 
-	setup_irq(IRQ_TIMER0, &w90p910_timer0_irq);
+	setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
 
-	w90p910_clocksource_init(rate);
-	w90p910_clockevents_init(rate);
+	nuc900_clocksource_init(rate);
+	nuc900_clockevents_init(rate);
 }
 
-struct sys_timer w90x900_timer = {
-	.init		= w90p910_timer_init,
+struct sys_timer nuc900_timer = {
+	.init		= nuc900_timer_init,
 };
diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
index 6071f588257..937dfe4e9b1 100644
--- a/drivers/input/touchscreen/w90p910_ts.c
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -326,7 +326,7 @@ static struct platform_driver w90x900ts_driver = {
 	.probe		= w90x900ts_probe,
 	.remove		= __devexit_p(w90x900ts_remove),
 	.driver		= {
-		.name	= "w90x900-ts",
+		.name	= "nuc900-ts",
 		.owner	= THIS_MODULE,
 	},
 };
@@ -347,4 +347,4 @@ module_exit(w90x900ts_exit);
 MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
 MODULE_DESCRIPTION("w90p910 touch screen driver!");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:w90p910-ts");
+MODULE_ALIAS("platform:nuc900-ts");
-- 
GitLab


From 936fbe9efc96d40c8cdc23bba31a3beaad4f96c1 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 21 Aug 2009 07:08:24 +0100
Subject: [PATCH 245/257] ARM: 5683/1: Add nuc950 platform to w90x900

Add nuc950 platform to w90x900.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Kconfig          | 15 +++++++
 arch/arm/mach-w90x900/Makefile         |  2 +
 arch/arm/mach-w90x900/mach-nuc950evb.c | 44 +++++++++++++++++++++
 arch/arm/mach-w90x900/nuc950.c         | 54 ++++++++++++++++++++++++++
 arch/arm/mach-w90x900/nuc950.h         | 28 +++++++++++++
 5 files changed, 143 insertions(+)
 create mode 100644 arch/arm/mach-w90x900/mach-nuc950evb.c
 create mode 100644 arch/arm/mach-w90x900/nuc950.c
 create mode 100644 arch/arm/mach-w90x900/nuc950.h

diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
index 8e4178fe5ec..163b8010e57 100644
--- a/arch/arm/mach-w90x900/Kconfig
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -5,6 +5,11 @@ config CPU_W90P910
 	help
 	  Support for W90P910 of Nuvoton W90X900 CPUs.
 
+config CPU_NUC950
+	bool
+	help
+	  Support for NUCP950 of Nuvoton NUC900 CPUs.
+
 menu "W90P910 Machines"
 
 config MACH_W90P910EVB
@@ -16,4 +21,14 @@ config MACH_W90P910EVB
 
 endmenu
 
+menu "NUC950 Machines"
+
+config MACH_W90P950EVB
+	bool "Nuvoton NUC950 Evaluation Board"
+	select CPU_NUC950
+	help
+	   Say Y here if you are using the Nuvoton NUC950EVB
+
+endmenu
+
 endif
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index e38aa328e60..a4622b577a2 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -9,7 +9,9 @@ obj-y				+= clksel.o dev.o cpu.o
 # W90X900 CPU support files
 
 obj-$(CONFIG_CPU_W90P910)	+= nuc910.o
+obj-$(CONFIG_CPU_NUC950)	+= nuc950.o
 
 # machine support
 
 obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
+obj-$(CONFIG_MACH_W90P950EVB)	+= mach-nuc950evb.o
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
new file mode 100644
index 00000000000..cef903bcccd
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc950evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc950.h"
+
+static void __init nuc950evb_map_io(void)
+{
+	nuc950_map_io();
+	nuc950_init_clocks();
+}
+
+static void __init nuc950evb_init(void)
+{
+	nuc950_board_init();
+}
+
+MACHINE_START(W90P950EVB, "W90P950EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc950evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc950evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
new file mode 100644
index 00000000000..149508116d1
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc950.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC950 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc950_dev[] __initdata = {
+	&nuc900_device_kpi,
+	&nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc950evb_iodesc[] __initdata = {
+};
+
+/*Init NUC950 evb io*/
+
+void __init nuc950_map_io(void)
+{
+	nuc900_map_io(nuc950evb_iodesc, ARRAY_SIZE(nuc950evb_iodesc));
+}
+
+/*Init NUC950 clock*/
+
+void __init nuc950_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC950 board info*/
+
+void __init nuc950_board_init(void)
+{
+	nuc900_board_init(nuc950_dev, ARRAY_SIZE(nuc950_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc950.h b/arch/arm/mach-w90x900/nuc950.h
new file mode 100644
index 00000000000..98a1148bc5a
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc950.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc950.c */
+
+extern void nuc950_board_init(void);
+extern void nuc950_init_clocks(void);
+extern void nuc950_map_io(void);
-- 
GitLab


From 8e22676e56673494a15ba95b57af21eb47d8b98a Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 21 Aug 2009 07:09:03 +0100
Subject: [PATCH 246/257] ARM: 5684/1: Add nuc960 platform to w90x900

Add nuc960 platform to w90x900.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Kconfig          | 15 +++++++
 arch/arm/mach-w90x900/Makefile         |  2 +
 arch/arm/mach-w90x900/mach-nuc960evb.c | 44 +++++++++++++++++++++
 arch/arm/mach-w90x900/nuc960.c         | 54 ++++++++++++++++++++++++++
 arch/arm/mach-w90x900/nuc960.h         | 28 +++++++++++++
 5 files changed, 143 insertions(+)
 create mode 100644 arch/arm/mach-w90x900/mach-nuc960evb.c
 create mode 100644 arch/arm/mach-w90x900/nuc960.c
 create mode 100644 arch/arm/mach-w90x900/nuc960.h

diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
index 163b8010e57..69bab32a8bc 100644
--- a/arch/arm/mach-w90x900/Kconfig
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -10,6 +10,11 @@ config CPU_NUC950
 	help
 	  Support for NUCP950 of Nuvoton NUC900 CPUs.
 
+config CPU_NUC960
+	bool
+	help
+	  Support for NUCP960 of Nuvoton NUC900 CPUs.
+
 menu "W90P910 Machines"
 
 config MACH_W90P910EVB
@@ -31,4 +36,14 @@ config MACH_W90P950EVB
 
 endmenu
 
+menu "NUC960 Machines"
+
+config MACH_W90N960EVB
+	bool "Nuvoton NUC960 Evaluation Board"
+	select CPU_NUC960
+	help
+	   Say Y here if you are using the Nuvoton NUC960EVB
+
+endmenu
+
 endif
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index a4622b577a2..828c0326441 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -10,8 +10,10 @@ obj-y				+= clksel.o dev.o cpu.o
 
 obj-$(CONFIG_CPU_W90P910)	+= nuc910.o
 obj-$(CONFIG_CPU_NUC950)	+= nuc950.o
+obj-$(CONFIG_CPU_NUC960)	+= nuc960.o
 
 # machine support
 
 obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
 obj-$(CONFIG_MACH_W90P950EVB)	+= mach-nuc950evb.o
+obj-$(CONFIG_MACH_W90N960EVB)	+= mach-nuc960evb.o
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
new file mode 100644
index 00000000000..e3a46f19f2b
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc960evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc960.h"
+
+static void __init nuc960evb_map_io(void)
+{
+	nuc960_map_io();
+	nuc960_init_clocks();
+}
+
+static void __init nuc960evb_init(void)
+{
+	nuc960_board_init();
+}
+
+MACHINE_START(W90N960EVB, "W90N960EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc960evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc960evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/nuc960.c b/arch/arm/mach-w90x900/nuc960.c
new file mode 100644
index 00000000000..8851a3a27ce
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc960.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC960 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc960_dev[] __initdata = {
+	&nuc900_device_kpi,
+	&nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc960evb_iodesc[] __initdata = {
+};
+
+/*Init NUC960 evb io*/
+
+void __init nuc960_map_io(void)
+{
+	nuc900_map_io(nuc960evb_iodesc, ARRAY_SIZE(nuc960evb_iodesc));
+}
+
+/*Init NUC960 clock*/
+
+void __init nuc960_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC960 board info*/
+
+void __init nuc960_board_init(void)
+{
+	nuc900_board_init(nuc960_dev, ARRAY_SIZE(nuc960_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc960.h b/arch/arm/mach-w90x900/nuc960.h
new file mode 100644
index 00000000000..f0c07cbe3a8
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc960.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc960.c */
+
+extern void nuc960_board_init(void);
+extern void nuc960_init_clocks(void);
+extern void nuc960_map_io(void);
-- 
GitLab


From 13f96d8f4c5a3f6a6b5e578d08869d79d690e0b2 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Tue, 1 Sep 2009 22:01:27 +0100
Subject: [PATCH 247/257] ARM: 5687/1: fix an oops with highmem

In xdr_partial_copy_from_skb() there is that sequence:

		kaddr = kmap_atomic(*ppage, KM_SKB_SUNRPC_DATA);
		[...]
		flush_dcache_page(*ppage);
		kunmap_atomic(kaddr, KM_SKB_SUNRPC_DATA);

Mixing flush_dcache_page() and kmap_atomic() is a bit odd,
especially since kunmap_atomic() must deal with cache issues
already.  OTOH the non-highmem case must use flush_dcache_page()
as kunmap_atomic() becomes a no op with no cache maintenance.

Problem is that with highmem the implementation of kmap_atomic()
doesn't set page->virtual, and page_address(page) returns 0 in
that case. Here flush_dcache_page() calls __flush_dcache_page()
which calls __cpuc_flush_dcache_page(page_address(page)) resulting
in a kernel oops.

None of the kmap_atomic() implementations uses set_page_address().
Hence we can assume page_address() is always expected to return 0 in
that case. Let's conditionally call __cpuc_flush_dcache_page() only
when the page address is non zero, and perform that test only when
highmem is configured.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/flush.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index c07222eb5ce..575f3ad722e 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -144,7 +144,14 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
 	 * page.  This ensures that data in the physical page is mutually
 	 * coherent with the kernels mapping.
 	 */
-	__cpuc_flush_dcache_page(page_address(page));
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * kmap_atomic() doesn't set the page virtual address, and
+	 * kunmap_atomic() takes care of cache flushing already.
+	 */
+	if (page_address(page))
+#endif
+		__cpuc_flush_dcache_page(page_address(page));
 
 	/*
 	 * If this is a page cache page, and we have an aliasing VIPT cache,
-- 
GitLab


From c47a830c08a26a7c210ae16a0ffe3f56ba86ea69 Mon Sep 17 00:00:00 2001
From: Dick Hollenbeck <dick@softplc.com>
Date: Wed, 2 Sep 2009 17:07:29 +0100
Subject: [PATCH 248/257] ARM: 5688/1: ks8695_serial: disable_irq() lockup

disable_irq() cannot be called from interrupt context without self imposed deadlock. This was happening in ks8695uart_stop_tx().

Signed-off-by: Dick Hollenbeck <dick@softplc.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/serial/serial_ks8695.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index e0665630e4d..52db5cc3f90 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -110,7 +110,11 @@ static struct console ks8695_console;
 static void ks8695uart_stop_tx(struct uart_port *port)
 {
 	if (tx_enabled(port)) {
-		disable_irq(KS8695_IRQ_UART_TX);
+		/* use disable_irq_nosync() and not disable_irq() to avoid self
+		 * imposed deadlock by not waiting for irq handler to end,
+		 * since this ks8695uart_stop_tx() is called from interrupt context.
+		 */
+		disable_irq_nosync(KS8695_IRQ_UART_TX);
 		tx_enable(port, 0);
 	}
 }
-- 
GitLab


From 7929eb9cf643ae416e5081b2a6fa558d37b9854c Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Thu, 3 Sep 2009 21:45:59 +0100
Subject: [PATCH 249/257] ARM: 5691/1: fix cache aliasing issues between kmap()
 and kmap_atomic() with highmem

Let's suppose a highmem page is kmap'd with kmap().  A pkmap entry is
used, the page mapped to it, and the virtual cache is dirtied.  Then
kunmap() is used which does virtually nothing except for decrementing a
usage count.

Then, let's suppose the _same_ page gets mapped using kmap_atomic().
It is therefore mapped onto a fixmap entry instead, which has a
different virtual address unaware of the dirty cache data for that page
sitting in the pkmap mapping.

Fortunately it is easy to know if a pkmap mapping still exists for that
page and use it directly with kmap_atomic(), thanks to kmap_high_get().

And actual testing with a printk in the added code path shows that this
condition is actually met *extremely* frequently.  Seems that we've been
quite lucky that things have worked so well with highmem so far.

Cc: stable@kernel.org
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/highmem.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index a34954d9df7..73cae57fa70 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -40,11 +40,16 @@ void *kmap_atomic(struct page *page, enum km_type type)
 {
 	unsigned int idx;
 	unsigned long vaddr;
+	void *kmap;
 
 	pagefault_disable();
 	if (!PageHighMem(page))
 		return page_address(page);
 
+	kmap = kmap_high_get(page);
+	if (kmap)
+		return kmap;
+
 	idx = type + KM_TYPE_NR * smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 #ifdef CONFIG_DEBUG_HIGHMEM
@@ -80,6 +85,9 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 #else
 		(void) idx;  /* to kill a warning */
 #endif
+	} else if (vaddr >= PKMAP_ADDR(0) && vaddr < PKMAP_ADDR(LAST_PKMAP)) {
+		/* this address was obtained through kmap_high_get() */
+		kunmap_high(pte_page(pkmap_page_table[PKMAP_NR(vaddr)]));
 	}
 	pagefault_enable();
 }
-- 
GitLab


From 56ddf7e6d4f69d7ce9f1c484b62e99d6b029e6f8 Mon Sep 17 00:00:00 2001
From: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Date: Wed, 2 Sep 2009 22:11:08 +0100
Subject: [PATCH 250/257] ARM: 5689/1: Update default config of HP Jornada
 700-series machines

This patch updates the default config for HP Jornada 700-series handhelds.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/jornada720_defconfig | 329 ++++++++++++++++----------
 1 file changed, 210 insertions(+), 119 deletions(-)

diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index f3074e49f2f..df9bfbea861 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Tue Sep 16 18:56:58 2008
+# Linux kernel version: 2.6.31-rc6
+# Fri Aug 21 15:41:39 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,16 +17,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -44,10 +41,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -56,9 +62,11 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -69,17 +77,22 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -87,30 +100,25 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -126,7 +134,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -136,14 +144,15 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -152,23 +161,25 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
 
 #
 # SA11x0 Implementations
@@ -188,14 +199,6 @@ CONFIG_SA1100_JORNADA720_SSP=y
 # CONFIG_SA1100_SIMPAD is not set
 CONFIG_SA1100_SSP=y
 
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
 #
 # Processor Type
 #
@@ -215,8 +218,8 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_SA1111=y
+CONFIG_DMABOUNCE=y
 CONFIG_FORCE_MAX_ZONEORDER=9
 
 #
@@ -246,30 +249,36 @@ CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_NODES_SHIFT=2
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -281,9 +290,10 @@ CONFIG_CMDLINE=""
 # CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 # CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -294,12 +304,14 @@ CONFIG_CMDLINE=""
 #
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
-CONFIG_FPE_FASTFPE=y
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -353,7 +365,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -367,10 +378,12 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -379,6 +392,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -388,7 +402,10 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -431,14 +448,17 @@ CONFIG_IRCOMM=m
 CONFIG_SA1100_FIR=m
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 
 #
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -464,29 +484,34 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_PNP is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -513,8 +538,34 @@ CONFIG_DUMMY=y
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -523,17 +574,27 @@ CONFIG_MII=m
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HERMES is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -565,20 +626,23 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+CONFIG_KEYBOARD_HP7XX=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_HP7XX=y
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -587,8 +651,8 @@ CONFIG_TOUCHSCREEN_HP7XX=y
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -624,11 +688,12 @@ CONFIG_SERIAL_SA1100_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -649,6 +714,10 @@ CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
 # CONFIG_GPIO_SYSFS is not set
 
+#
+# Memory mapped GPIO expanders:
+#
+
 #
 # I2C GPIO expanders:
 #
@@ -663,12 +732,14 @@ CONFIG_GPIOLIB=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -676,6 +747,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
@@ -687,22 +759,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia Capabilities Port drivers
 #
 # CONFIG_MCP_SA11X0 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -712,6 +769,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -733,7 +791,17 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SA1100 is not set
 CONFIG_FB_S1D13XXX=y
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_LCD_HP700=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_HP700=y
 
 #
 # Display device support
@@ -757,6 +825,8 @@ CONFIG_FONT_8x16=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -781,12 +851,15 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -794,15 +867,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_SA1100=y
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -811,12 +879,16 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -825,6 +897,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -846,14 +923,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -862,6 +937,7 @@ CONFIG_SYSFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -870,6 +946,7 @@ CONFIG_SYSFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -935,12 +1012,16 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -958,19 +1039,20 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -985,13 +1067,16 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1062,15 +1147,21 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1078,7 +1169,7 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
GitLab


From d656f07a7405e788e1275d0238b67f593615f2bb Mon Sep 17 00:00:00 2001
From: sedji gaouaou <sedji.gaouaou@atmel.com>
Date: Thu, 6 Aug 2009 15:20:22 +0100
Subject: [PATCH 251/257] ARM: 5640/1: This patch modifies the support of AC97
 on the at91sam9263 ek board

This patch modifies the support of AC97 on the at91sam9263 ek board, so it would
share the code with AVR32.
Plus it removes a typo in at91sam9263_devices.c.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9263_devices.c | 14 +++++++-------
 arch/arm/mach-at91/board-sam9263ek.c     |  2 +-
 arch/arm/mach-at91/include/mach/board.h  |  6 ++----
 3 files changed, 10 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index b7f23324231..55719a97427 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -707,9 +707,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
  *  AC97
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
 static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct atmel_ac97_data ac97_data;
+static struct ac97c_platform_data ac97_data;
 
 static struct resource ac97_resources[] = {
 	[0] = {
@@ -725,8 +725,8 @@ static struct resource ac97_resources[] = {
 };
 
 static struct platform_device at91sam9263_ac97_device = {
-	.name		= "ac97c",
-	.id		= 1,
+	.name		= "atmel_ac97c",
+	.id		= 0,
 	.dev		= {
 				.dma_mask		= &ac97_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
@@ -736,7 +736,7 @@ static struct platform_device at91sam9263_ac97_device = {
 	.num_resources	= ARRAY_SIZE(ac97_resources),
 };
 
-void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
 {
 	if (!data)
 		return;
@@ -750,11 +750,11 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data)
 	if (data->reset_pin)
 		at91_set_gpio_output(data->reset_pin, 0);
 
-	ac97_data = *ek_data;
+	ac97_data = *data;
 	platform_device_register(&at91sam9263_ac97_device);
 }
 #else
-void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 57d52528f22..3b669b78e45 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -365,7 +365,7 @@ static void __init ek_add_device_buttons(void) {}
 /*
  * AC97
  */
-static struct atmel_ac97_data ek_ac97_data = {
+static struct ac97c_platform_data ek_ac97_data = {
 	.reset_pin	= AT91_PIN_PA13,
 };
 
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 74801d275cd..13f27a4b882 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -37,6 +37,7 @@
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
+#include <sound/atmel-ac97c.h>
 
  /* USB Device */
 struct at91_udc_data {
@@ -174,10 +175,7 @@ struct atmel_lcdfb_info;
 extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
 
  /* AC97 */
-struct atmel_ac97_data {
-	u8		reset_pin;	/* reset */
-};
-extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
 
  /* ISI */
 extern void __init at91_add_device_isi(void);
-- 
GitLab


From 8c3cbd5a2b2cc244277f6089dae83f09f1e7a27b Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Wed, 26 Aug 2009 15:33:16 +0100
Subject: [PATCH 252/257] ARM: 5686/1: at91: Correct AC97 reset line in
 at91sam9263ek board

Board code was wrongly setting up the reset pin for AC97 on at91sam9263ek.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9263ek.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 3b669b78e45..1bf7bd4cbe1 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -364,9 +364,9 @@ static void __init ek_add_device_buttons(void) {}
 
 /*
  * AC97
+ * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
-	.reset_pin	= AT91_PIN_PA13,
 };
 
 
-- 
GitLab


From 99f329a2ba3c2d07cc90ca9309babf27ddf98bff Mon Sep 17 00:00:00 2001
From: Pavel Machek <pavel@ucw.cz>
Date: Sun, 6 Sep 2009 07:28:40 +0200
Subject: [PATCH 253/257] [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix
 resume

sharpsl_pm.c code tries to read battery state very early during
resume, but those battery meters are connected on SPI and that's only
resumed way later.

Replace the check with simple checking of battery fatal signal, that
actually works at this stage.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Stanislav Brabec <utx@penguin.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/sharpsl_pm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 2546c066cd6..629e05d1196 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -678,8 +678,8 @@ static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enab
 		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
 	}
 
-	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
-	{
+	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
+	    (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)))	{
 		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
 		corgi_goto_sleep(alarm_time, alarm_enable, state);
 		return 1;
-- 
GitLab


From 54782674084ed9dc829050a8c18298db6847679d Mon Sep 17 00:00:00 2001
From: Simon Guinot <sguinot@lacie.com>
Date: Tue, 23 Jun 2009 13:54:35 +0200
Subject: [PATCH 254/257] [ARM] orion5x: Add LaCie NAS 2Big Network support

This patch add support for the 2Big Network LaCie boards.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/Kconfig         |   7 +
 arch/arm/mach-orion5x/Makefile        |   1 +
 arch/arm/mach-orion5x/net2big-setup.c | 431 ++++++++++++++++++++++++++
 3 files changed, 439 insertions(+)
 create mode 100644 arch/arm/mach-orion5x/net2big-setup.c

diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 5062b05b76b..c3d513cad5a 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -103,6 +103,13 @@ config MACH_BIGDISK
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Big Disk Network NAS.
 
+config MACH_NET2BIG
+	bool "LaCie 2Big Network"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie 2Big Network NAS.
+
 config MACH_MSS2
 	bool "Maxtor Shared Storage II"
 	help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 1db8a3a2708..89772fcd65c 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
 obj-$(CONFIG_MACH_EDMINI_V2)	+= edmini_v2-setup.o
 obj-$(CONFIG_MACH_D2NET)	+= d2net-setup.o
 obj-$(CONFIG_MACH_BIGDISK)	+= d2net-setup.o
+obj-$(CONFIG_MACH_NET2BIG)	+= net2big-setup.o
 obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
 obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
new file mode 100644
index 00000000000..7bd6283476f
--- /dev/null
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -0,0 +1,431 @@
+/*
+ * arch/arm/mach-orion5x/net2big-setup.c
+ *
+ * LaCie 2Big Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * LaCie 2Big Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define NET2BIG_NOR_BOOT_BASE		0xfff80000
+#define NET2BIG_NOR_BOOT_SIZE		SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition net2big_partitions[] = {
+	{
+		.name		= "Full512kb",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0x00000000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data net2big_nor_flash_data = {
+	.width		= 1,
+	.parts		= net2big_partitions,
+	.nr_parts	= ARRAY_SIZE(net2big_partitions),
+};
+
+static struct resource net2big_nor_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+	.start			= NET2BIG_NOR_BOOT_BASE,
+	.end			= NET2BIG_NOR_BOOT_BASE
+					+ NET2BIG_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device net2big_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &net2big_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &net2big_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data net2big_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip         | description
+ * 0x32     | Ricoh 5C372b | RTC
+ * 0x50     | HT24LC08     | eeprom (1kB)
+ */
+static struct i2c_board_info __initdata net2big_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	}, {
+		I2C_BOARD_INFO("24c08", 0x50),
+	},
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data net2big_sata_data = {
+	.n_ports	= 2,
+};
+
+#define NET2BIG_GPIO_SATA_POWER_REQ	19
+#define NET2BIG_GPIO_SATA0_POWER	23
+#define NET2BIG_GPIO_SATA1_POWER	25
+
+static void __init net2big_sata_power_init(void)
+{
+	int err;
+
+	/* Configure GPIOs over MPP max number. */
+	orion_gpio_set_valid(NET2BIG_GPIO_SATA0_POWER, 1);
+	orion_gpio_set_valid(NET2BIG_GPIO_SATA1_POWER, 1);
+
+	err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status");
+	if (err == 0) {
+		err = gpio_direction_input(NET2BIG_GPIO_SATA0_POWER);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA0_POWER);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA0 power GPIO\n");
+		return;
+	}
+
+	err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status");
+	if (err == 0) {
+		err = gpio_direction_input(NET2BIG_GPIO_SATA1_POWER);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA1_POWER);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA1 power GPIO\n");
+		goto err_free_1;
+	}
+
+	err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA_POWER_REQ);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA power request GPIO\n");
+		goto err_free_2;
+	}
+
+	if (gpio_get_value(NET2BIG_GPIO_SATA0_POWER) &&
+		gpio_get_value(NET2BIG_GPIO_SATA1_POWER)) {
+		return;
+	}
+
+	/*
+	 * SATA power up on both disk is done by pulling high the CPLD power
+	 * request line. The 300ms delay is related to the CPLD clock and is
+	 * needed to be sure that the CPLD has take into account the low line
+	 * status.
+	 */
+	msleep(300);
+	gpio_set_value(NET2BIG_GPIO_SATA_POWER_REQ, 1);
+	pr_info("net2big: power up SATA hard disks\n");
+
+	return;
+
+err_free_2:
+	gpio_free(NET2BIG_GPIO_SATA1_POWER);
+err_free_1:
+	gpio_free(NET2BIG_GPIO_SATA0_POWER);
+
+	return;
+}
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+/*
+ * The power front LEDs (blue and red) and SATA red LEDs are controlled via a
+ * single GPIO line and are compatible with the leds-gpio driver.
+ *
+ * The SATA blue LEDs have some hardware blink capabilities which are detailled
+ * in the following array:
+ *
+ * SATAx blue LED | SATAx activity | LED state
+ *                |                |
+ *       0        |       0        |  blink (rate 300ms)
+ *       1        |       0        |  off
+ *       ?        |       1        |  on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ *        Blue LED have priority.
+ */
+
+#define NET2BIG_GPIO_PWR_RED_LED	6
+#define NET2BIG_GPIO_PWR_BLUE_LED	16
+#define NET2BIG_GPIO_PWR_LED_BLINK_STOP	7
+
+#define NET2BIG_GPIO_SATA0_RED_LED	11
+#define NET2BIG_GPIO_SATA1_RED_LED	10
+
+#define NET2BIG_GPIO_SATA0_BLUE_LED	17
+#define NET2BIG_GPIO_SATA1_BLUE_LED	13
+
+static struct gpio_led net2big_leds[] = {
+	{
+		.name = "net2big:red:power",
+		.gpio = NET2BIG_GPIO_PWR_RED_LED,
+	},
+	{
+		.name = "net2big:blue:power",
+		.gpio = NET2BIG_GPIO_PWR_BLUE_LED,
+	},
+	{
+		.name = "net2big:red:sata0",
+		.gpio = NET2BIG_GPIO_SATA0_RED_LED,
+	},
+	{
+		.name = "net2big:red:sata1",
+		.gpio = NET2BIG_GPIO_SATA1_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data net2big_led_data = {
+	.num_leds = ARRAY_SIZE(net2big_leds),
+	.leds = net2big_leds,
+};
+
+static struct platform_device net2big_gpio_leds = {
+	.name           = "leds-gpio",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &net2big_led_data,
+	},
+};
+
+static void __init net2big_gpio_leds_init(void)
+{
+	int err;
+
+	/* Stop initial CPLD slow red/blue blinking on power LED. */
+	err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP,
+			   "Power LED blink stop");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_PWR_LED_BLINK_STOP);
+	}
+	if (err)
+		pr_err("net2big: failed to setup power LED blink GPIO\n");
+
+	/*
+	 * Configure SATA0 and SATA1 blue LEDs to blink in relation with the
+	 * hard disk activity.
+	 */
+	err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED,
+			   "SATA0 blue LED control");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA0_BLUE_LED);
+	}
+	if (err)
+		pr_err("net2big: failed to setup SATA0 blue LED GPIO\n");
+
+	err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED,
+			   "SATA1 blue LED control");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA1_BLUE_LED);
+	}
+	if (err)
+		pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");
+
+	platform_device_register(&net2big_gpio_leds);
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NET2BIG_GPIO_PUSH_BUTTON	18
+#define NET2BIG_GPIO_POWER_SWITCH_ON	8
+#define NET2BIG_GPIO_POWER_SWITCH_OFF	9
+
+#define NET2BIG_SWITCH_POWER_ON		0x1
+#define NET2BIG_SWITCH_POWER_OFF	0x2
+
+static struct gpio_keys_button net2big_buttons[] = {
+	{
+		.type		= EV_SW,
+		.code		= NET2BIG_SWITCH_POWER_OFF,
+		.gpio		= NET2BIG_GPIO_POWER_SWITCH_OFF,
+		.desc		= "Power rocker switch (auto|off)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_SW,
+		.code		= NET2BIG_SWITCH_POWER_ON,
+		.gpio		= NET2BIG_GPIO_POWER_SWITCH_ON,
+		.desc		= "Power rocker switch (on|auto)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_KEY,
+		.code		= KEY_POWER,
+		.gpio		= NET2BIG_GPIO_PUSH_BUTTON,
+		.desc		= "Front Push Button",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data net2big_button_data = {
+	.buttons	= net2big_buttons,
+	.nbuttons	= ARRAY_SIZE(net2big_buttons),
+};
+
+static struct platform_device net2big_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &net2big_button_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },	/* Raid mode (bit 0) */
+	{  1, MPP_GPIO },	/* USB port 2 fuse (0 = Fail, 1 = Ok) */
+	{  2, MPP_GPIO },	/* Raid mode (bit 1) */
+	{  3, MPP_GPIO },	/* Board ID (bit 0) */
+	{  4, MPP_GPIO },	/* Fan activity (0 = Off, 1 = On) */
+	{  5, MPP_GPIO },	/* Fan fail detection */
+	{  6, MPP_GPIO },	/* Red front LED (0 = Off, 1 = On) */
+	{  7, MPP_GPIO },	/* Disable initial blinking on front LED */
+	{  8, MPP_GPIO },	/* Rear power switch (on|auto) */
+	{  9, MPP_GPIO },	/* Rear power switch (auto|off) */
+	{ 10, MPP_GPIO },	/* SATA 1 red LED (0 = Off, 1 = On) */
+	{ 11, MPP_GPIO },	/* SATA 0 red LED (0 = Off, 1 = On) */
+	{ 12, MPP_GPIO },	/* Board ID (bit 1) */
+	{ 13, MPP_GPIO },	/* SATA 1 blue LED blink control */
+	{ 14, MPP_SATA_LED },
+	{ 15, MPP_SATA_LED },
+	{ 16, MPP_GPIO },	/* Blue front LED control */
+	{ 17, MPP_GPIO },	/* SATA 0 blue LED blink control */
+	{ 18, MPP_GPIO },	/* Front button (0 = Released, 1 = Pushed ) */
+	{ 19, MPP_GPIO },	/* SATA{0,1} power On/Off request */
+	{ -1 }
+	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+	/* 23: SATA 0 power status */
+	/* 24: Board power off */
+	/* 25: SATA 1 power status */
+};
+
+#define NET2BIG_GPIO_POWER_OFF		24
+
+static void net2big_power_off(void)
+{
+	gpio_set_value(NET2BIG_GPIO_POWER_OFF, 1);
+}
+
+static void __init net2big_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(net2big_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&net2big_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+	orion5x_xor_init();
+
+	net2big_sata_power_init();
+	orion5x_sata_init(&net2big_sata_data);
+
+	orion5x_setup_dev_boot_win(NET2BIG_NOR_BOOT_BASE,
+				   NET2BIG_NOR_BOOT_SIZE);
+	platform_device_register(&net2big_nor_flash);
+
+	platform_device_register(&net2big_gpio_buttons);
+	net2big_gpio_leds_init();
+
+	i2c_register_board_info(0, net2big_i2c_devices,
+				ARRAY_SIZE(net2big_i2c_devices));
+
+	orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1);
+
+	if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = net2big_power_off;
+	else
+		pr_err("net2big: failed to configure power-off GPIO\n");
+
+	pr_notice("net2big: Flash writing is not yet supported.\n");
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+MACHINE_START(NET2BIG, "LaCie 2Big Network")
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= net2big_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
+
-- 
GitLab


From b7cfda9fc3d7aa60cffab5367f2a72a4a70060cd Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 7 Sep 2009 15:06:42 +0100
Subject: [PATCH 255/257] ARM: Fix pfn_valid() for sparse memory

On OMAP platforms, some people want to declare to segment up the memory
between the kernel and a separate application such that there is a hole
in the middle of the memory as far as Linux is concerned.  However,
they want to be able to mmap() the hole.

This currently causes problems, because update_mmu_cache() thinks that
there are valid struct pages for the "hole".  Fix this by making
pfn_valid() slightly more expensive, by checking whether the PFN is
contained within the meminfo array.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Khasim Syed Mohammed <khasim@ti.com>
---
 arch/arm/include/asm/memory.h | 17 -----------------
 arch/arm/include/asm/page.h   |  4 ++++
 arch/arm/mm/init.c            | 32 ++++++++++++++++++++++++++++++++
 3 files changed, 36 insertions(+), 17 deletions(-)

diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 85763db8744..b3b54c6216a 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -212,7 +212,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
  *
  *  page_to_pfn(page)	convert a struct page * to a PFN number
  *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
- *  pfn_valid(pfn)	indicates whether a PFN number is valid
  *
  *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
  *  virt_addr_valid(k)	indicates whether a virtual address is valid
@@ -221,10 +220,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 
 #define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
 
-#ifndef CONFIG_SPARSEMEM
-#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
-#endif
-
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
 
@@ -241,18 +236,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 #define arch_pfn_to_nid(pfn)	PFN_TO_NID(pfn)
 #define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
 
-#define pfn_valid(pfn)						\
-	({							\
-		unsigned int nid = PFN_TO_NID(pfn);		\
-		int valid = nid < MAX_NUMNODES;			\
-		if (valid) {					\
-			pg_data_t *node = NODE_DATA(nid);	\
-			valid = (pfn - node->node_start_pfn) <	\
-				node->node_spanned_pages;	\
-		}						\
-		valid;						\
-	})
-
 #define virt_to_page(kaddr)					\
 	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
 
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 9c746af1bf6..3a32af4cce3 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -194,6 +194,10 @@ typedef unsigned long pgprot_t;
 
 typedef struct page *pgtable_t;
 
+#ifndef CONFIG_SPARSEMEM
+extern int pfn_valid(unsigned long);
+#endif
+
 #include <asm/memory.h>
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 3a7279c1ce5..ea36186f32c 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -15,6 +15,7 @@
 #include <linux/mman.h>
 #include <linux/nodemask.h>
 #include <linux/initrd.h>
+#include <linux/sort.h>
 #include <linux/highmem.h>
 
 #include <asm/mach-types.h>
@@ -349,12 +350,43 @@ static void __init bootmem_free_node(int node, struct meminfo *mi)
 	free_area_init_node(node, zone_size, min, zhole_size);
 }
 
+#ifndef CONFIG_SPARSEMEM
+int pfn_valid(unsigned long pfn)
+{
+	struct meminfo *mi = &meminfo;
+	unsigned int left = 0, right = mi->nr_banks;
+
+	do {
+		unsigned int mid = (right + left) / 2;
+		struct membank *bank = &mi->bank[mid];
+
+		if (pfn < bank_pfn_start(bank))
+			right = mid;
+		else if (pfn >= bank_pfn_end(bank))
+			left = mid + 1;
+		else
+			return 1;
+	} while (left < right);
+	return 0;
+}
+EXPORT_SYMBOL(pfn_valid);
+#endif
+
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+	const struct membank *a = _a, *b = _b;
+	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
+
 void __init bootmem_init(void)
 {
 	struct meminfo *mi = &meminfo;
 	unsigned long min, max_low, max_high;
 	int node, initrd_node;
 
+	sort(&mi->bank, mi->nr_banks, sizeof(mi->bank[0]), meminfo_cmp, NULL);
+
 	/*
 	 * Locate which node contains the ramdisk image, if any.
 	 */
-- 
GitLab


From f17a1f06d2fa93f4825be572622eb02c4894db4e Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Tue, 4 Aug 2009 01:01:02 +0100
Subject: [PATCH 256/257] ARM: 5636/1: Move vendor enum to AMBA include

This moves the primecell vendor enum definition inside vic.c
out to linux/amba/bus.h where it belongs and replace any
occurances of specific vendor ID:s with the respective enums
instead.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c    | 12 ++++--------
 drivers/mmc/host/mmci.c  |  6 +++---
 include/linux/amba/bus.h |  5 +++++
 3 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index bc1f9ad61ff..920ced0b73c 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,6 +22,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
@@ -272,11 +273,6 @@ static struct irq_chip vic_chip = {
 static void vik_init_st(void __iomem *base, unsigned int irq_start,
 			 u32 vic_sources);
 
-enum vic_vendor {
-	VENDOR_ARM = 0x41,
-	VENDOR_ST = 0x80,
-};
-
 /**
  * vic_init - initialise a vectored interrupt controller
  * @base: iomem base address
@@ -289,7 +285,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 {
 	unsigned int i;
 	u32 cellid = 0;
-	enum vic_vendor vendor;
+	enum amba_vendor vendor;
 
 	/* Identify which VIC cell this one is, by reading the ID */
 	for (i = 0; i < 4; i++) {
@@ -301,13 +297,13 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 	       base, cellid, vendor);
 
 	switch(vendor) {
-	case VENDOR_ST:
+	case AMBA_VENDOR_ST:
 		vik_init_st(base, irq_start, vic_sources);
 		return;
 	default:
 		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
 		/* fall through */
-	case VENDOR_ARM:
+	case AMBA_VENDOR_ARM:
 		break;
 	}
 
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index e1aa8471ab1..d78b1e460d7 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -430,7 +430,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 				clk = 255;
 			host->cclk = host->mclk / (2 * (clk + 1));
 		}
-		if (host->hw_designer == 0x80)
+		if (host->hw_designer == AMBA_VENDOR_ST)
 			clk |= MCI_FCEN; /* Bug fix in ST IP block */
 		clk |= MCI_CLK_ENABLE;
 	}
@@ -443,7 +443,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		break;
 	case MMC_POWER_UP:
 		/* The ST version does not have this, fall through to POWER_ON */
-		if (host->hw_designer != 0x80) {
+		if (host->hw_designer != AMBA_VENDOR_ST) {
 			pwr |= MCI_PWR_UP;
 			break;
 		}
@@ -453,7 +453,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	}
 
 	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
-		if (host->hw_designer != 0x80)
+		if (host->hw_designer != AMBA_VENDOR_ST)
 			pwr |= MCI_ROD;
 		else {
 			/*
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 9b93cafa82a..ab94335b4bb 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -36,6 +36,11 @@ struct amba_driver {
 	struct amba_id		*id_table;
 };
 
+enum amba_vendor {
+	AMBA_VENDOR_ARM = 0x41,
+	AMBA_VENDOR_ST = 0x80,
+};
+
 #define amba_get_drvdata(d)	dev_get_drvdata(&d->dev)
 #define amba_set_drvdata(d,p)	dev_set_drvdata(&d->dev, p)
 
-- 
GitLab


From c1cb6b7fb5190ad55b31aa3289d48fedd288ddaa Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 12 Sep 2009 12:00:17 +0100
Subject: [PATCH 257/257] [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 68 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 64 insertions(+), 4 deletions(-)

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 200d83a9828..c8c55b46934 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Aug 1 16:26:02 2009
+# Last update: Sat Sep 12 12:00:16 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1962,7 +1962,7 @@ ethernut5		MACH_ETHERNUT5		ETHERNUT5		1971
 arm11			MACH_ARM11		ARM11			1972
 cpuat9260		MACH_CPUAT9260		CPUAT9260		1973
 cpupxa255		MACH_CPUPXA255		CPUPXA255		1974
-cpuimx27		MACH_CPUIMX27		CPUIMX27		1975
+eukrea_cpuimx27		MACH_CPUIMX27		CPUIMX27		1975
 cheflux			MACH_CHEFLUX		CHEFLUX			1976
 eb_cpux9k2		MACH_EB_CPUX9K2		EB_CPUX9K2		1977
 opcotec			MACH_OPCOTEC		OPCOTEC			1978
@@ -2249,14 +2249,14 @@ omap3_phrazer		MACH_OMAP3_PHRAZER	OMAP3_PHRAZER		2261
 darwin			MACH_DARWIN		DARWIN			2262
 oratiscomu		MACH_ORATISCOMU		ORATISCOMU		2263
 rtsbc20			MACH_RTSBC20		RTSBC20			2264
-i780			MACH_I780		I780			2265
+sgh_i780		MACH_I780		I780			2265
 gemini324		MACH_GEMINI324		GEMINI324		2266
 oratislan		MACH_ORATISLAN		ORATISLAN		2267
 oratisalog		MACH_ORATISALOG		ORATISALOG		2268
 oratismadi		MACH_ORATISMADI		ORATISMADI		2269
 oratisot16		MACH_ORATISOT16		ORATISOT16		2270
 oratisdesk		MACH_ORATISDESK		ORATISDESK		2271
-v2p_ca9			MACH_V2P_CA9		V2P_CA9			2272
+v2_ca9			MACH_V2P_CA9		V2P_CA9			2272
 sintexo			MACH_SINTEXO		SINTEXO			2273
 cm3389			MACH_CM3389		CM3389			2274
 omap3_cio		MACH_OMAP3_CIO		OMAP3_CIO		2275
@@ -2349,3 +2349,63 @@ openrd_client		MACH_OPENRD_CLIENT	OPENRD_CLIENT		2361
 hpipaq11x		MACH_HPIPAQ11X		HPIPAQ11X		2362
 wayland			MACH_WAYLAND		WAYLAND			2363
 acnbsx102		MACH_ACNBSX102		ACNBSX102		2364
+hwat91			MACH_HWAT91		HWAT91			2365
+at91sam9263cs		MACH_AT91SAM9263CS	AT91SAM9263CS		2366
+csb732			MACH_CSB732		CSB732			2367
+u8500			MACH_U8500		U8500			2368
+huqiu			MACH_HUQIU		HUQIU			2369
+mx51_kunlun		MACH_MX51_KUNLUN	MX51_KUNLUN		2370
+pmt1g			MACH_PMT1G		PMT1G			2371
+htcelf			MACH_HTCELF		HTCELF			2372
+armadillo420		MACH_ARMADILLO420	ARMADILLO420		2373
+armadillo440		MACH_ARMADILLO440	ARMADILLO440		2374
+u_chip_dual_arm		MACH_U_CHIP_DUAL_ARM	U_CHIP_DUAL_ARM		2375
+csr_bdb3		MACH_CSR_BDB3		CSR_BDB3		2376
+dolby_cat1018		MACH_DOLBY_CAT1018	DOLBY_CAT1018		2377
+hy9307			MACH_HY9307		HY9307			2378
+aspire_easystore	MACH_A_ES		A_ES			2379
+davinci_irif		MACH_DAVINCI_IRIF	DAVINCI_IRIF		2380
+agama9263		MACH_AGAMA9263		AGAMA9263		2381
+marvell_jasper		MACH_MARVELL_JASPER	MARVELL_JASPER		2382
+flint			MACH_FLINT		FLINT			2383
+tavorevb3		MACH_TAVOREVB3		TAVOREVB3		2384
+sch_m490		MACH_SCH_M490		SCH_M490		2386
+rbl01			MACH_RBL01		RBL01			2387
+omnifi			MACH_OMNIFI		OMNIFI			2388
+otavalo			MACH_OTAVALO		OTAVALO			2389
+sienna			MACH_SIENNA		SIENNA			2390
+htc_excalibur_s620	MACH_HTC_EXCALIBUR_S620	HTC_EXCALIBUR_S620	2391
+htc_opal		MACH_HTC_OPAL		HTC_OPAL		2392
+touchbook		MACH_TOUCHBOOK		TOUCHBOOK		2393
+latte			MACH_LATTE		LATTE			2394
+xa200			MACH_XA200		XA200			2395
+nimrod			MACH_NIMROD		NIMROD			2396
+cc9p9215_3g		MACH_CC9P9215_3G	CC9P9215_3G		2397
+cc9p9215_3gjs		MACH_CC9P9215_3GJS	CC9P9215_3GJS		2398
+tk71			MACH_TK71		TK71			2399
+comham3525		MACH_COMHAM3525		COMHAM3525		2400
+mx31erebus		MACH_MX31EREBUS		MX31EREBUS		2401
+mcardmx27		MACH_MCARDMX27		MCARDMX27		2402
+paradise		MACH_PARADISE		PARADISE		2403
+tide			MACH_TIDE		TIDE			2404
+wzl2440			MACH_WZL2440		WZL2440			2405
+sdrdemo			MACH_SDRDEMO		SDRDEMO			2406
+ethercan2		MACH_ETHERCAN2		ETHERCAN2		2407
+ecmimg20		MACH_ECMIMG20		ECMIMG20		2408
+omap_dragon		MACH_OMAP_DRAGON	OMAP_DRAGON		2409
+halo			MACH_HALO		HALO			2410
+huangshan		MACH_HUANGSHAN		HUANGSHAN		2411
+vl_ma2sc		MACH_VL_MA2SC		VL_MA2SC		2412
+raumfeld_rc		MACH_RAUMFELD_RC	RAUMFELD_RC		2413
+raumfeld_connector	MACH_RAUMFELD_CONNECTOR	RAUMFELD_CONNECTOR	2414
+raumfeld_speaker	MACH_RAUMFELD_SPEAKER	RAUMFELD_SPEAKER	2415
+multibus_master		MACH_MULTIBUS_MASTER	MULTIBUS_MASTER		2416
+multibus_pbk		MACH_MULTIBUS_PBK	MULTIBUS_PBK		2417
+tnetv107x		MACH_TNETV107X		TNETV107X		2418
+snake			MACH_SNAKE		SNAKE			2419
+cwmx27			MACH_CWMX27		CWMX27			2420
+sch_m480		MACH_SCH_M480		SCH_M480		2421
+platypus		MACH_PLATYPUS		PLATYPUS		2422
+pss2			MACH_PSS2		PSS2			2423
+davinci_apm150		MACH_DAVINCI_APM150	DAVINCI_APM150		2424
+str9100			MACH_STR9100		STR9100			2425
-- 
GitLab