From 1ca5b9d2183f11bb8b69e04b19a7faf7f600a840 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 4 May 2008 01:31:42 -0400 Subject: [PATCH 0001/1024] power_supply: Support serial number in olpc_battery This adds serial number support to the OLPC battery driver. Signed-off-by: David Woodhouse Signed-off-by: Andres Salomon Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index ab1e8289f07..7524a63a54c 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -84,6 +84,8 @@ static struct power_supply olpc_ac = { .get_property = olpc_ac_get_prop, }; +static char bat_serial[17]; /* Ick */ + /********************************************************************* * Battery properties *********************************************************************/ @@ -94,6 +96,7 @@ static int olpc_bat_get_property(struct power_supply *psy, int ret = 0; int16_t ec_word; uint8_t ec_byte; + uint64_t ser_buf; ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1); if (ret) @@ -241,6 +244,14 @@ static int olpc_bat_get_property(struct power_supply *psy, ec_word = be16_to_cpu(ec_word); val->intval = ec_word * 100 / 256; break; + case POWER_SUPPLY_PROP_SERIAL_NUMBER: + ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8); + if (ret) + return ret; + + sprintf(bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf)); + val->strval = bat_serial; + break; default: ret = -EINVAL; break; @@ -260,6 +271,7 @@ static enum power_supply_property olpc_bat_props[] = { POWER_SUPPLY_PROP_TEMP, POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_SERIAL_NUMBER, }; /********************************************************************* -- GitLab From d7eb9e36c42504e87c7d92dd5c05cb6f2cf74d28 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 2 May 2008 13:41:58 -0700 Subject: [PATCH 0002/1024] power_supply: add eeprom dump file to olpc_battery's sysfs This allows you to dump 0x60 bytes from the battery's EEPROM (starting at address 0x20). Note that it does an EC command for each byte, so it's pretty slow. OTOH, if you want to grab just a single byte from somewhere in the EEPROM, you can do something like: dd bs=1 count=1 skip=16 if=/sys/class/power_supply/olpc-battery/eeprom | od -x Userspace battery collection/logging information needs this. Signed-off-by: Andres Salomon Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 49 ++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 7524a63a54c..f8dc2b18bb4 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -274,6 +274,48 @@ static enum power_supply_property olpc_bat_props[] = { POWER_SUPPLY_PROP_SERIAL_NUMBER, }; +/* EEPROM reading goes completely around the power_supply API, sadly */ + +#define EEPROM_START 0x20 +#define EEPROM_END 0x80 +#define EEPROM_SIZE (EEPROM_END - EEPROM_START) + +static ssize_t olpc_bat_eeprom_read(struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, size_t count) +{ + uint8_t ec_byte; + int ret, end; + + if (off >= EEPROM_SIZE) + return 0; + if (off + count > EEPROM_SIZE) + count = EEPROM_SIZE - off; + + end = EEPROM_START + off + count; + for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) { + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, + &buf[ec_byte - EEPROM_START], 1); + if (ret) { + printk(KERN_ERR "olpc-battery: EC command " + "EC_BAT_EEPROM @ 0x%x failed -" + " %d!\n", ec_byte, ret); + return -EIO; + } + } + + return count; +} + +static struct bin_attribute olpc_bat_eeprom = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + .owner = THIS_MODULE, + }, + .size = 0, + .read = olpc_bat_eeprom_read, +}; + /********************************************************************* * Initialisation *********************************************************************/ @@ -327,8 +369,14 @@ static int __init olpc_bat_init(void) if (ret) goto battery_failed; + ret = device_create_bin_file(olpc_bat.dev, &olpc_bat_eeprom); + if (ret) + goto eeprom_failed; + goto success; +eeprom_failed: + power_supply_unregister(&olpc_bat); battery_failed: power_supply_unregister(&olpc_ac); ac_failed: @@ -339,6 +387,7 @@ success: static void __exit olpc_bat_exit(void) { + device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom); power_supply_unregister(&olpc_bat); power_supply_unregister(&olpc_ac); platform_device_unregister(bat_pdev); -- GitLab From b2bd8a3bcdd18101eb5d85c267c1a1fb8ce9acc7 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 2 May 2008 13:41:59 -0700 Subject: [PATCH 0003/1024] power_supply: cleanup of the OLPC battery driver Move portions of the massive switch statement into functions. The layout of this thing has already caused one bug (a break in the wrong place), it needed to shrink. Signed-off-by: Andres Salomon Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 191 ++++++++++++++++++++++------------- 1 file changed, 118 insertions(+), 73 deletions(-) diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index f8dc2b18bb4..d5fe6f0c9de 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -86,6 +86,117 @@ static struct power_supply olpc_ac = { static char bat_serial[17]; /* Ick */ +static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte) +{ + if (olpc_platform_info.ecver > 0x44) { + if (ec_byte & BAT_STAT_CHARGING) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (ec_byte & BAT_STAT_DISCHARGING) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (ec_byte & BAT_STAT_FULL) + val->intval = POWER_SUPPLY_STATUS_FULL; + else /* er,... */ + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + } else { + /* Older EC didn't report charge/discharge bits */ + if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */ + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (ec_byte & BAT_STAT_FULL) + val->intval = POWER_SUPPLY_STATUS_FULL; + else /* Not _necessarily_ true but EC doesn't tell all yet */ + val->intval = POWER_SUPPLY_STATUS_CHARGING; + } + + return 0; +} + +static int olpc_bat_get_health(union power_supply_propval *val) +{ + uint8_t ec_byte; + int ret; + + ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1); + if (ret) + return ret; + + switch (ec_byte) { + case 0: + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + + case BAT_ERR_OVERTEMP: + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + break; + + case BAT_ERR_OVERVOLTAGE: + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + break; + + case BAT_ERR_INFOFAIL: + case BAT_ERR_OUT_OF_CONTROL: + case BAT_ERR_ID_FAIL: + case BAT_ERR_ACR_FAIL: + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + break; + + default: + /* Eep. We don't know this failure code */ + ret = -EIO; + } + + return ret; +} + +static int olpc_bat_get_mfr(union power_supply_propval *val) +{ + uint8_t ec_byte; + int ret; + + ec_byte = BAT_ADDR_MFR_TYPE; + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + if (ret) + return ret; + + switch (ec_byte >> 4) { + case 1: + val->strval = "Gold Peak"; + break; + case 2: + val->strval = "BYD"; + break; + default: + val->strval = "Unknown"; + break; + } + + return ret; +} + +static int olpc_bat_get_tech(union power_supply_propval *val) +{ + uint8_t ec_byte; + int ret; + + ec_byte = BAT_ADDR_MFR_TYPE; + ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + if (ret) + return ret; + + switch (ec_byte & 0xf) { + case 1: + val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH; + break; + case 2: + val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe; + break; + default: + val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; + break; + } + + return ret; +} + /********************************************************************* * Battery properties *********************************************************************/ @@ -113,25 +224,10 @@ static int olpc_bat_get_property(struct power_supply *psy, switch (psp) { case POWER_SUPPLY_PROP_STATUS: - if (olpc_platform_info.ecver > 0x44) { - if (ec_byte & BAT_STAT_CHARGING) - val->intval = POWER_SUPPLY_STATUS_CHARGING; - else if (ec_byte & BAT_STAT_DISCHARGING) - val->intval = POWER_SUPPLY_STATUS_DISCHARGING; - else if (ec_byte & BAT_STAT_FULL) - val->intval = POWER_SUPPLY_STATUS_FULL; - else /* er,... */ - val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; - } else { - /* Older EC didn't report charge/discharge bits */ - if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */ - val->intval = POWER_SUPPLY_STATUS_DISCHARGING; - else if (ec_byte & BAT_STAT_FULL) - val->intval = POWER_SUPPLY_STATUS_FULL; - else /* Not _necessarily_ true but EC doesn't tell all yet */ - val->intval = POWER_SUPPLY_STATUS_CHARGING; - break; - } + ret = olpc_bat_get_status(val, ec_byte); + if (ret) + return ret; + break; case POWER_SUPPLY_PROP_PRESENT: val->intval = !!(ec_byte & BAT_STAT_PRESENT); break; @@ -140,72 +236,21 @@ static int olpc_bat_get_property(struct power_supply *psy, if (ec_byte & BAT_STAT_DESTROY) val->intval = POWER_SUPPLY_HEALTH_DEAD; else { - ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1); + ret = olpc_bat_get_health(val); if (ret) return ret; - - switch (ec_byte) { - case 0: - val->intval = POWER_SUPPLY_HEALTH_GOOD; - break; - - case BAT_ERR_OVERTEMP: - val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; - break; - - case BAT_ERR_OVERVOLTAGE: - val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; - break; - - case BAT_ERR_INFOFAIL: - case BAT_ERR_OUT_OF_CONTROL: - case BAT_ERR_ID_FAIL: - case BAT_ERR_ACR_FAIL: - val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; - break; - - default: - /* Eep. We don't know this failure code */ - return -EIO; - } } break; case POWER_SUPPLY_PROP_MANUFACTURER: - ec_byte = BAT_ADDR_MFR_TYPE; - ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + ret = olpc_bat_get_mfr(val); if (ret) return ret; - - switch (ec_byte >> 4) { - case 1: - val->strval = "Gold Peak"; - break; - case 2: - val->strval = "BYD"; - break; - default: - val->strval = "Unknown"; - break; - } break; case POWER_SUPPLY_PROP_TECHNOLOGY: - ec_byte = BAT_ADDR_MFR_TYPE; - ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1); + ret = olpc_bat_get_tech(val); if (ret) return ret; - - switch (ec_byte & 0xf) { - case 1: - val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH; - break; - case 2: - val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe; - break; - default: - val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; - break; - } break; case POWER_SUPPLY_PROP_VOLTAGE_AVG: ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2); -- GitLab From 484d6d50cca3941db6e063113d124333aed0abc0 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 2 May 2008 13:41:59 -0700 Subject: [PATCH 0004/1024] power_supply: bump EC version check that we refuse to run with in olpc_battery Refuse to run with an EC < 0x44. We're playing it safe, and this is a pretty old EC version. Also, add a comment about why we're checking the EC version. Signed-off-by: Andres Salomon Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index d5fe6f0c9de..c8b596a7fc9 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -389,8 +389,14 @@ static int __init olpc_bat_init(void) if (!olpc_platform_info.ecver) return -ENXIO; - if (olpc_platform_info.ecver < 0x43) { - printk(KERN_NOTICE "OLPC EC version 0x%02x too old for battery driver.\n", olpc_platform_info.ecver); + + /* + * We've seen a number of EC protocol changes; this driver requires + * the latest EC protocol, supported by 0x44 and above. + */ + if (olpc_platform_info.ecver < 0x44) { + printk(KERN_NOTICE "OLPC EC version 0x%02x too old for " + "battery driver.\n", olpc_platform_info.ecver); return -ENXIO; } -- GitLab From 8e552c36d90c03d2cabf5373788998966751b609 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Mon, 12 May 2008 21:46:29 -0400 Subject: [PATCH 0005/1024] power_supply: add CHARGE_COUNTER property and olpc_battery support for it This adds PROP_CHARGE_COUNTER to the power supply class (documenting it as well). The OLPC battery driver uses this for spitting out its ACR values (in uAh). We have some rounding errors (the data sheet claims 416.7, the math actually works out to 416.666667, so we're forced to choose between overflows or precision loss. I chose precision loss, and stuck w/ data sheet values), but I don't think anyone will care that much. Signed-off-by: Andres Salomon Signed-off-by: Anton Vorontsov --- Documentation/power/power_supply_class.txt | 4 ++++ drivers/power/olpc_battery.c | 11 ++++++++++- drivers/power/power_supply_sysfs.c | 1 + include/linux/power_supply.h | 1 + 4 files changed, 16 insertions(+), 1 deletion(-) diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index a8686e5a685..c6cd4956047 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -101,6 +101,10 @@ of charge when battery became full/empty". It also could mean "value of charge when battery considered full/empty at given conditions (temperature, age)". I.e. these attributes represents real thresholds, not design values. +CHARGE_COUNTER - the current charge counter (in µAh). This could easily +be negative; there is no empty or full value. It is only useful for +relative, time-based measurements. + ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. CAPACITY - capacity in percents. diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index c8b596a7fc9..9dd1589733c 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -19,7 +19,7 @@ #define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */ #define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */ -#define EC_BAT_ACR 0x12 +#define EC_BAT_ACR 0x12 /* int16_t, *416.7, µAh */ #define EC_BAT_TEMP 0x13 /* uint16_t, *100/256, °C */ #define EC_AMB_TEMP 0x14 /* uint16_t, *100/256, °C */ #define EC_BAT_STATUS 0x15 /* uint8_t, bitmask */ @@ -289,6 +289,14 @@ static int olpc_bat_get_property(struct power_supply *psy, ec_word = be16_to_cpu(ec_word); val->intval = ec_word * 100 / 256; break; + case POWER_SUPPLY_PROP_CHARGE_COUNTER: + ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2); + if (ret) + return ret; + + ec_word = be16_to_cpu(ec_word); + val->intval = ec_word * 4167 / 10; + break; case POWER_SUPPLY_PROP_SERIAL_NUMBER: ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8); if (ret) @@ -317,6 +325,7 @@ static enum power_supply_property olpc_bat_props[] = { POWER_SUPPLY_PROP_TEMP_AMBIENT, POWER_SUPPLY_PROP_MANUFACTURER, POWER_SUPPLY_PROP_SERIAL_NUMBER, + POWER_SUPPLY_PROP_CHARGE_COUNTER, }; /* EEPROM reading goes completely around the power_supply API, sadly */ diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index c444d6b10c5..82e1246eeb0 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -99,6 +99,7 @@ static struct device_attribute power_supply_attrs[] = { POWER_SUPPLY_ATTR(charge_empty), POWER_SUPPLY_ATTR(charge_now), POWER_SUPPLY_ATTR(charge_avg), + POWER_SUPPLY_ATTR(charge_counter), POWER_SUPPLY_ATTR(energy_full_design), POWER_SUPPLY_ATTR(energy_empty_design), POWER_SUPPLY_ATTR(energy_full), diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index 68ed19ccf1f..ea96ead1d39 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -78,6 +78,7 @@ enum power_supply_property { POWER_SUPPLY_PROP_CHARGE_EMPTY, POWER_SUPPLY_PROP_CHARGE_NOW, POWER_SUPPLY_PROP_CHARGE_AVG, + POWER_SUPPLY_PROP_CHARGE_COUNTER, POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN, POWER_SUPPLY_PROP_ENERGY_FULL, -- GitLab From 75d8807962fc7529b4946e9ec92cae197be5a967 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Wed, 14 May 2008 16:20:38 -0700 Subject: [PATCH 0006/1024] power_supply: fix up CHARGE_COUNTER output to be more precise As Richard Smith pointed out, ACR * 6250 / 15 provides for less precision loss than ACR * 4167 / 10, _and_ it doesn't overflow. Switch to using that equation for CHARGE_COUNTER. Signed-off-by: Andres Salomon Cc: "Richard A. Smith" Signed-off-by: Andrew Morton Signed-off-by: Anton Vorontsov --- drivers/power/olpc_battery.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c index 9dd1589733c..32570af3c5c 100644 --- a/drivers/power/olpc_battery.c +++ b/drivers/power/olpc_battery.c @@ -19,7 +19,7 @@ #define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */ #define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */ -#define EC_BAT_ACR 0x12 /* int16_t, *416.7, µAh */ +#define EC_BAT_ACR 0x12 /* int16_t, *6250/15, µAh */ #define EC_BAT_TEMP 0x13 /* uint16_t, *100/256, °C */ #define EC_AMB_TEMP 0x14 /* uint16_t, *100/256, °C */ #define EC_BAT_STATUS 0x15 /* uint8_t, bitmask */ @@ -295,7 +295,7 @@ static int olpc_bat_get_property(struct power_supply *psy, return ret; ec_word = be16_to_cpu(ec_word); - val->intval = ec_word * 4167 / 10; + val->intval = ec_word * 6250 / 15; break; case POWER_SUPPLY_PROP_SERIAL_NUMBER: ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8); -- GitLab From 94da1e2eff319994eefc7d04de7c911f64146e88 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:04:46 +0100 Subject: [PATCH 0007/1024] [WATCHDOG 01/57] Clean acquirewdt and check for BKL dependancies This brings the file into line with coding style. Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/acquirewdt.c | 119 +++++++++++++++++----------------- 1 file changed, 58 insertions(+), 61 deletions(-) diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c index 85269c365a1..269ada2f1fc 100644 --- a/drivers/watchdog/acquirewdt.c +++ b/drivers/watchdog/acquirewdt.c @@ -58,39 +58,46 @@ #include /* For standard types (like size_t) */ #include /* For the -ENODEV/... values */ #include /* For printk/panic/... */ -#include /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */ +#include /* For MODULE_ALIAS_MISCDEV + (WATCHDOG_MINOR) */ #include /* For the watchdog specific items */ #include /* For file operations */ #include /* For io-port access */ #include /* For platform_driver framework */ #include /* For __init/__exit/... */ -#include /* For copy_to_user/put_user/... */ -#include /* For inb/outb/... */ +#include /* For copy_to_user/put_user/... */ +#include /* For inb/outb/... */ /* Module information */ #define DRV_NAME "acquirewdt" #define PFX DRV_NAME ": " #define WATCHDOG_NAME "Acquire WDT" -#define WATCHDOG_HEARTBEAT 0 /* There is no way to see what the correct time-out period is */ +/* There is no way to see what the correct time-out period is */ +#define WATCHDOG_HEARTBEAT 0 /* internal variables */ -static struct platform_device *acq_platform_device; /* the watchdog platform device */ +/* the watchdog platform device */ +static struct platform_device *acq_platform_device; static unsigned long acq_is_open; static char expect_close; /* module parameters */ -static int wdt_stop = 0x43; /* You must set this - there is no sane way to probe for this board. */ +/* You must set this - there is no sane way to probe for this board. */ +static int wdt_stop = 0x43; module_param(wdt_stop, int, 0); MODULE_PARM_DESC(wdt_stop, "Acquire WDT 'stop' io port (default 0x43)"); -static int wdt_start = 0x443; /* You must set this - there is no sane way to probe for this board. */ +/* You must set this - there is no sane way to probe for this board. */ +static int wdt_start = 0x443; module_param(wdt_start, int, 0); MODULE_PARM_DESC(wdt_start, "Acquire WDT 'start' io port (default 0x443)"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Watchdog Operations @@ -112,18 +119,18 @@ static void acq_stop(void) * /dev/watchdog handling */ -static ssize_t acq_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t acq_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ - if(count) { + if (count) { if (!nowayout) { size_t i; - /* note: just in case someone wrote the magic character * five months ago... */ expect_close = 0; - - /* scan to see whether or not we got the magic character */ + /* scan to see whether or not we got the + magic character */ for (i = 0; i != count; i++) { char c; if (get_user(c, buf + i)) @@ -132,64 +139,55 @@ static ssize_t acq_write(struct file *file, const char __user *buf, size_t count expect_close = 42; } } - - /* Well, anyhow someone wrote to us, we should return that favour */ + /* Well, anyhow someone wrote to us, we should + return that favour */ acq_keepalive(); } return count; } -static int acq_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { int options, retval = -EINVAL; void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident = - { + static struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = WATCHDOG_NAME, }; - switch(cmd) - { + switch (cmd) { case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + return put_user(0, p); case WDIOC_KEEPALIVE: - acq_keepalive(); - return 0; + acq_keepalive(); + return 0; case WDIOC_GETTIMEOUT: return put_user(WATCHDOG_HEARTBEAT, p); case WDIOC_SETOPTIONS: { - if (get_user(options, p)) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) - { - acq_stop(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) - { - acq_keepalive(); - retval = 0; - } - - return retval; + if (get_user(options, p)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + acq_stop(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + acq_keepalive(); + retval = 0; + } + return retval; } - default: - return -ENOTTY; + return -ENOTTY; } } @@ -211,7 +209,8 @@ static int acq_close(struct inode *inode, struct file *file) if (expect_close == 42) { acq_stop(); } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); acq_keepalive(); } clear_bit(0, &acq_is_open); @@ -227,7 +226,7 @@ static const struct file_operations acq_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = acq_write, - .ioctl = acq_ioctl, + .unlocked_ioctl = acq_ioctl, .open = acq_open, .release = acq_close, }; @@ -248,32 +247,29 @@ static int __devinit acq_probe(struct platform_device *dev) if (wdt_stop != wdt_start) { if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_stop); + printk(KERN_ERR PFX + "I/O address 0x%04x already in use\n", wdt_stop); ret = -EIO; goto out; } } if (!request_region(wdt_start, 1, WATCHDOG_NAME)) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", + printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", wdt_start); ret = -EIO; goto unreg_stop; } - ret = misc_register(&acq_miscdev); if (ret != 0) { - printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_regions; } - - printk (KERN_INFO PFX "initialized. (nowayout=%d)\n", - nowayout); + printk(KERN_INFO PFX "initialized. (nowayout=%d)\n", nowayout); return 0; - unreg_regions: release_region(wdt_start, 1); unreg_stop: @@ -286,9 +282,9 @@ out: static int __devexit acq_remove(struct platform_device *dev) { misc_deregister(&acq_miscdev); - release_region(wdt_start,1); - if(wdt_stop != wdt_start) - release_region(wdt_stop,1); + release_region(wdt_start, 1); + if (wdt_stop != wdt_start) + release_region(wdt_stop, 1); return 0; } @@ -313,18 +309,19 @@ static int __init acq_init(void) { int err; - printk(KERN_INFO "WDT driver for Acquire single board computer initialising.\n"); + printk(KERN_INFO + "WDT driver for Acquire single board computer initialising.\n"); err = platform_driver_register(&acquirewdt_driver); if (err) return err; - acq_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); + acq_platform_device = platform_device_register_simple(DRV_NAME, + -1, NULL, 0); if (IS_ERR(acq_platform_device)) { err = PTR_ERR(acq_platform_device); goto unreg_platform_driver; } - return 0; unreg_platform_driver: -- GitLab From b6b4d9b8d07e34f745871d3109c84894db29041b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:04:51 +0100 Subject: [PATCH 0008/1024] [WATCHDOG 02/57] clean up and check advantech watchdog Clean up the advantech watchdog code and inspect for BKL problems Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/advantechwdt.c | 135 +++++++++++++++----------------- 1 file changed, 62 insertions(+), 73 deletions(-) diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c index 8121cc24734..220d238ee42 100644 --- a/drivers/watchdog/advantechwdt.c +++ b/drivers/watchdog/advantechwdt.c @@ -72,35 +72,35 @@ MODULE_PARM_DESC(wdt_start, "Advantech WDT 'start' io port (default 0x443)"); static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=63, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1<= timeout <=63, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) "."); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Watchdog Operations */ -static void -advwdt_ping(void) +static void advwdt_ping(void) { /* Write a watchdog value */ outb_p(timeout, wdt_start); } -static void -advwdt_disable(void) +static void advwdt_disable(void) { inb_p(wdt_stop); } -static int -advwdt_set_heartbeat(int t) +static int advwdt_set_heartbeat(int t) { - if ((t < 1) || (t > 63)) + if (t < 1 || t > 63) return -EINVAL; - timeout = t; return 0; } @@ -109,8 +109,8 @@ advwdt_set_heartbeat(int t) * /dev/watchdog handling */ -static ssize_t -advwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t advwdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { @@ -131,9 +131,7 @@ advwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *pp return count; } -static int -advwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { int new_timeout; void __user *argp = (void __user *)arg; @@ -146,57 +144,50 @@ advwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) - return -EFAULT; - break; + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + return put_user(0, p); case WDIOC_KEEPALIVE: - advwdt_ping(); - break; + advwdt_ping(); + break; case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - if (advwdt_set_heartbeat(new_timeout)) - return -EINVAL; - advwdt_ping(); - /* Fall */ - + if (get_user(new_timeout, p)) + return -EFAULT; + if (advwdt_set_heartbeat(new_timeout)) + return -EINVAL; + advwdt_ping(); + /* Fall */ case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - + return put_user(timeout, p); case WDIOC_SETOPTIONS: { - int options, retval = -EINVAL; - - if (get_user(options, p)) - return -EFAULT; + int options, retval = -EINVAL; - if (options & WDIOS_DISABLECARD) { - advwdt_disable(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) { - advwdt_ping(); - retval = 0; - } - - return retval; + if (get_user(options, p)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + advwdt_disable(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + advwdt_ping(); + retval = 0; + } + return retval; } - default: - return -ENOTTY; + return -ENOTTY; } return 0; } -static int -advwdt_open(struct inode *inode, struct file *file) +static int advwdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(0, &advwdt_is_open)) return -EBUSY; @@ -214,7 +205,8 @@ advwdt_close(struct inode *inode, struct file *file) if (adv_expect_close == 42) { advwdt_disable(); } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); advwdt_ping(); } clear_bit(0, &advwdt_is_open); @@ -230,7 +222,7 @@ static const struct file_operations advwdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = advwdt_write, - .ioctl = advwdt_ioctl, + .unlocked_ioctl = advwdt_ioctl, .open = advwdt_open, .release = advwdt_close, }; @@ -245,23 +237,24 @@ static struct miscdevice advwdt_miscdev = { * Init & exit routines */ -static int __devinit -advwdt_probe(struct platform_device *dev) +static int __devinit advwdt_probe(struct platform_device *dev) { int ret; if (wdt_stop != wdt_start) { if (!request_region(wdt_stop, 1, WATCHDOG_NAME)) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_stop); + printk(KERN_ERR PFX + "I/O address 0x%04x already in use\n", + wdt_stop); ret = -EIO; goto out; } } if (!request_region(wdt_start, 1, WATCHDOG_NAME)) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_start); + printk(KERN_ERR PFX + "I/O address 0x%04x already in use\n", + wdt_start); ret = -EIO; goto unreg_stop; } @@ -269,20 +262,19 @@ advwdt_probe(struct platform_device *dev) /* Check that the heartbeat value is within it's range ; if not reset to the default */ if (advwdt_set_heartbeat(timeout)) { advwdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk (KERN_INFO PFX "timeout value must be 1<=x<=63, using %d\n", - timeout); + printk(KERN_INFO PFX + "timeout value must be 1<=x<=63, using %d\n", timeout); } ret = misc_register(&advwdt_miscdev); if (ret != 0) { - printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_regions; } - - printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", + printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); - out: return ret; unreg_regions: @@ -293,8 +285,7 @@ unreg_stop: goto out; } -static int __devexit -advwdt_remove(struct platform_device *dev) +static int __devexit advwdt_remove(struct platform_device *dev) { misc_deregister(&advwdt_miscdev); release_region(wdt_start,1); @@ -304,8 +295,7 @@ advwdt_remove(struct platform_device *dev) return 0; } -static void -advwdt_shutdown(struct platform_device *dev) +static void advwdt_shutdown(struct platform_device *dev) { /* Turn the WDT off if we have a soft shutdown */ advwdt_disable(); @@ -321,8 +311,7 @@ static struct platform_driver advwdt_driver = { }, }; -static int __init -advwdt_init(void) +static int __init advwdt_init(void) { int err; @@ -332,7 +321,8 @@ advwdt_init(void) if (err) return err; - advwdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); + advwdt_platform_device = platform_device_register_simple(DRV_NAME, + -1, NULL, 0); if (IS_ERR(advwdt_platform_device)) { err = PTR_ERR(advwdt_platform_device); goto unreg_platform_driver; @@ -345,8 +335,7 @@ unreg_platform_driver: return err; } -static void __exit -advwdt_exit(void) +static void __exit advwdt_exit(void) { platform_device_unregister(advwdt_platform_device); platform_driver_unregister(&advwdt_driver); -- GitLab From 173d95bc2e68baf73eb89fb9ef1cc63a66f581a5 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:04:57 +0100 Subject: [PATCH 0009/1024] [WATCHDOG 03/57] ali: watchdog locking and style Clean up and check locking Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/alim1535_wdt.c | 186 +++++++++++++------------- drivers/watchdog/alim7101_wdt.c | 224 +++++++++++++++++--------------- 2 files changed, 209 insertions(+), 201 deletions(-) diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c index 2b1fbdb2fcf..88760cb5ec1 100644 --- a/drivers/watchdog/alim1535_wdt.c +++ b/drivers/watchdog/alim1535_wdt.c @@ -19,8 +19,8 @@ #include #include -#include -#include +#include +#include #define WATCHDOG_NAME "ALi_M1535" #define PFX WATCHDOG_NAME ": " @@ -30,17 +30,21 @@ static unsigned long ali_is_open; static char ali_expect_release; static struct pci_dev *ali_pci; -static u32 ali_timeout_bits; /* stores the computed timeout */ +static u32 ali_timeout_bits; /* stores the computed timeout */ static DEFINE_SPINLOCK(ali_lock); /* Guards the hardware */ /* module parameters */ static int timeout = WATCHDOG_TIMEOUT; module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (0= 18000) { timeout = WATCHDOG_TIMEOUT; - printk(KERN_INFO PFX "timeout value must be 0 #include -#include -#include +#include +#include #include #define OUR_NAME "alim7101_wdt" @@ -60,13 +60,17 @@ */ #define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ -static int timeout = WATCHDOG_TIMEOUT; /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +static int timeout = WATCHDOG_TIMEOUT; module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<=timeout<=3600, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); -static int use_gpio = 0; /* Use the pic (for a1d revision alim7101) */ +static int use_gpio; /* Use the pic (for a1d revision alim7101) */ module_param(use_gpio, int, 0); -MODULE_PARM_DESC(use_gpio, "Use the gpio watchdog. (required by old cobalt boards)"); +MODULE_PARM_DESC(use_gpio, + "Use the gpio watchdog (required by old cobalt boards)."); static void wdt_timer_ping(unsigned long); static DEFINE_TIMER(timer, wdt_timer_ping, 0, 1); @@ -77,8 +81,9 @@ static struct pci_dev *alim7101_pmu; static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Whack the dog @@ -89,23 +94,26 @@ static void wdt_timer_ping(unsigned long data) /* If we got a heartbeat pulse within the WDT_US_INTERVAL * we agree to ping the WDT */ - char tmp; + char tmp; - if(time_before(jiffies, next_heartbeat)) - { + if (time_before(jiffies, next_heartbeat)) { /* Ping the WDT (this is actually a disarm/arm sequence) */ pci_read_config_byte(alim7101_pmu, 0x92, &tmp); - pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp & ~ALI_WDT_ARM)); - pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp | ALI_WDT_ARM)); + pci_write_config_byte(alim7101_pmu, + ALI_7101_WDT, (tmp & ~ALI_WDT_ARM)); + pci_write_config_byte(alim7101_pmu, + ALI_7101_WDT, (tmp | ALI_WDT_ARM)); if (use_gpio) { - pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp); - pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp - | 0x20); - pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp - & ~0x20); + pci_read_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, &tmp); + pci_write_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, tmp | 0x20); + pci_write_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, tmp & ~0x20); } } else { - printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); + printk(KERN_WARNING PFX + "Heartbeat lost! Will not ping the watchdog\n"); } /* Re-set the timer interval */ mod_timer(&timer, jiffies + WDT_INTERVAL); @@ -121,17 +129,23 @@ static void wdt_change(int writeval) pci_read_config_byte(alim7101_pmu, ALI_7101_WDT, &tmp); if (writeval == WDT_ENABLE) { - pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp | ALI_WDT_ARM)); + pci_write_config_byte(alim7101_pmu, + ALI_7101_WDT, (tmp | ALI_WDT_ARM)); if (use_gpio) { - pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp); - pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp & ~0x20); + pci_read_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, &tmp); + pci_write_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, tmp & ~0x20); } } else { - pci_write_config_byte(alim7101_pmu, ALI_7101_WDT, (tmp & ~ALI_WDT_ARM)); + pci_write_config_byte(alim7101_pmu, + ALI_7101_WDT, (tmp & ~ALI_WDT_ARM)); if (use_gpio) { - pci_read_config_byte(alim7101_pmu, ALI_7101_GPIO_O, &tmp); - pci_write_config_byte(alim7101_pmu, ALI_7101_GPIO_O, tmp | 0x20); + pci_read_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, &tmp); + pci_write_config_byte(alim7101_pmu, + ALI_7101_GPIO_O, tmp | 0x20); } } } @@ -169,10 +183,11 @@ static void wdt_keepalive(void) * /dev/watchdog handling */ -static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos) +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ - if(count) { + if (count) { if (!nowayout) { size_t ofs; @@ -195,119 +210,116 @@ static ssize_t fop_write(struct file * file, const char __user * buf, size_t cou return count; } -static int fop_open(struct inode * inode, struct file * file) +static int fop_open(struct inode *inode, struct file *file) { /* Just in case we're already talking to someone... */ - if(test_and_set_bit(0, &wdt_is_open)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; /* Good, fire up the show */ wdt_startup(); return nonseekable_open(inode, file); } -static int fop_close(struct inode * inode, struct file * file) +static int fop_close(struct inode *inode, struct file *file) { - if(wdt_expect_close == 42) + if (wdt_expect_close == 42) wdt_turnoff(); else { /* wim: shouldn't there be a: del_timer(&timer); */ - printk(KERN_CRIT PFX "device file closed unexpectedly. Will not stop the WDT!\n"); + printk(KERN_CRIT PFX + "device file closed unexpectedly. Will not stop the WDT!\n"); } clear_bit(0, &wdt_is_open); wdt_expect_close = 0; return 0; } -static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident = - { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "ALiM7101", }; - switch(cmd) + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETOPTIONS: { - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; - case WDIOC_SETOPTIONS: - { - int new_options, retval = -EINVAL; - - if(get_user(new_options, p)) - return -EFAULT; - - if(new_options & WDIOS_DISABLECARD) { - wdt_turnoff(); - retval = 0; - } - - if(new_options & WDIOS_ENABLECARD) { - wdt_startup(); - retval = 0; - } + int new_options, retval = -EINVAL; - return retval; + if (get_user(new_options, p)) + return -EFAULT; + if (new_options & WDIOS_DISABLECARD) { + wdt_turnoff(); + retval = 0; } - case WDIOC_SETTIMEOUT: - { - int new_timeout; - - if(get_user(new_timeout, p)) - return -EFAULT; - - if(new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */ - return -EINVAL; - - timeout = new_timeout; - wdt_keepalive(); - /* Fall through */ + if (new_options & WDIOS_ENABLECARD) { + wdt_startup(); + retval = 0; } - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - default: - return -ENOTTY; + return retval; + } + case WDIOC_SETTIMEOUT: + { + int new_timeout; + + if (get_user(new_timeout, p)) + return -EFAULT; + /* arbitrary upper limit */ + if (new_timeout < 1 || new_timeout > 3600) + return -EINVAL; + timeout = new_timeout; + wdt_keepalive(); + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: + return -ENOTTY; } } static const struct file_operations wdt_fops = { - .owner= THIS_MODULE, - .llseek= no_llseek, - .write= fop_write, - .open= fop_open, - .release= fop_close, - .ioctl= fop_ioctl, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = fop_write, + .open = fop_open, + .release = fop_close, + .unlocked_ioctl = fop_ioctl, }; static struct miscdevice wdt_miscdev = { - .minor=WATCHDOG_MINOR, - .name="watchdog", - .fops=&wdt_fops, + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, }; /* * Notifier for system down */ -static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +static int wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) { - if (code==SYS_DOWN || code==SYS_HALT) + if (code == SYS_DOWN || code == SYS_HALT) wdt_turnoff(); - if (code==SYS_RESTART) { + if (code == SYS_RESTART) { /* - * Cobalt devices have no way of rebooting themselves other than - * getting the watchdog to pull reset, so we restart the watchdog on - * reboot with no heartbeat + * Cobalt devices have no way of rebooting themselves other + * than getting the watchdog to pull reset, so we restart the + * watchdog on reboot with no heartbeat */ wdt_change(WDT_ENABLE); printk(KERN_INFO PFX "Watchdog timer is now enabled with no heartbeat - should reboot in ~1 second.\n"); @@ -320,8 +332,7 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void * turn the timebomb registers off. */ -static struct notifier_block wdt_notifier= -{ +static struct notifier_block wdt_notifier = { .notifier_call = wdt_notify_sys, }; @@ -354,7 +365,8 @@ static int __init alim7101_wdt_init(void) ali1543_south = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); if (!ali1543_south) { - printk(KERN_INFO PFX "ALi 1543 South-Bridge not present - WDT not set\n"); + printk(KERN_INFO PFX + "ALi 1543 South-Bridge not present - WDT not set\n"); goto err_out; } pci_read_config_byte(ali1543_south, 0x5e, &tmp); @@ -363,24 +375,25 @@ static int __init alim7101_wdt_init(void) if (!use_gpio) { printk(KERN_INFO PFX "Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter.\n"); goto err_out; - } + } nowayout = 1; } else if ((tmp & 0x1e) != 0x12 && (tmp & 0x1e) != 0x00) { printk(KERN_INFO PFX "ALi 1543 South-Bridge does not have the correct revision number (???1001?) - WDT not set\n"); goto err_out; } - if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */ - { + if (timeout < 1 || timeout > 3600) { + /* arbitrary upper limit */ timeout = WATCHDOG_TIMEOUT; - printk(KERN_INFO PFX "timeout value must be 1<=x<=3600, using %d\n", - timeout); + printk(KERN_INFO PFX + "timeout value must be 1 <= x <= 3600, using %d\n", + timeout); } rc = register_reboot_notifier(&wdt_notifier); if (rc) { - printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - rc); + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", rc); goto err_out; } @@ -391,9 +404,8 @@ static int __init alim7101_wdt_init(void) goto err_out_reboot; } - if (nowayout) { + if (nowayout) __module_get(THIS_MODULE); - } printk(KERN_INFO PFX "WDT driver for ALi M7101 initialised. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); -- GitLab From fbd4714907cd54ba74b8d35228813a060ae0176a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:07 +0100 Subject: [PATCH 0010/1024] [WATCHDOG 04/57] AR7 watchdog Fix locking Use unlocked_ioctl Remove semaphores Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ar7_wdt.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c index 2eb48c0df32..ef7b0d67095 100644 --- a/drivers/watchdog/ar7_wdt.c +++ b/drivers/watchdog/ar7_wdt.c @@ -69,7 +69,8 @@ struct ar7_wdt { u32 prescale; }; -static struct semaphore open_semaphore; +static unsigned long wdt_is_open; +static spinlock_t wdt_lock; static unsigned expect_close; /* XXX currently fixed, allows max margin ~68.72 secs */ @@ -154,8 +155,10 @@ static void ar7_wdt_update_margin(int new_margin) u32 change; change = new_margin * (ar7_vbus_freq() / prescale_value); - if (change < 1) change = 1; - if (change > 0xffff) change = 0xffff; + if (change < 1) + change = 1; + if (change > 0xffff) + change = 0xffff; ar7_wdt_change(change); margin = change * prescale_value / ar7_vbus_freq(); printk(KERN_INFO DRVNAME @@ -179,7 +182,7 @@ static void ar7_wdt_disable_wdt(void) static int ar7_wdt_open(struct inode *inode, struct file *file) { /* only allow one at a time */ - if (down_trylock(&open_semaphore)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; ar7_wdt_enable_wdt(); expect_close = 0; @@ -195,9 +198,7 @@ static int ar7_wdt_release(struct inode *inode, struct file *file) "will not disable the watchdog timer\n"); else if (!nowayout) ar7_wdt_disable_wdt(); - - up(&open_semaphore); - + clear_bit(0, &wdt_is_open); return 0; } @@ -222,7 +223,9 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data, if (len) { size_t i; + spin_lock(&wdt_lock); ar7_wdt_kick(1); + spin_unlock(&wdt_lock); expect_close = 0; for (i = 0; i < len; ++i) { @@ -237,8 +240,8 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data, return len; } -static int ar7_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ar7_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { static struct watchdog_info ident = { .identity = LONGNAME, @@ -269,8 +272,10 @@ static int ar7_wdt_ioctl(struct inode *inode, struct file *file, if (new_margin < 1) return -EINVAL; + spin_lock(&wdt_lock); ar7_wdt_update_margin(new_margin); ar7_wdt_kick(1); + spin_unlock(&wdt_lock); case WDIOC_GETTIMEOUT: if (put_user(margin, (int *)arg)) @@ -282,7 +287,7 @@ static int ar7_wdt_ioctl(struct inode *inode, struct file *file, static const struct file_operations ar7_wdt_fops = { .owner = THIS_MODULE, .write = ar7_wdt_write, - .ioctl = ar7_wdt_ioctl, + .unlocked_ioctl = ar7_wdt_ioctl, .open = ar7_wdt_open, .release = ar7_wdt_release, }; @@ -297,6 +302,8 @@ static int __init ar7_wdt_init(void) { int rc; + spin_lock_init(&wdt_lock); + ar7_wdt_get_regs(); if (!request_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt), @@ -312,8 +319,6 @@ static int __init ar7_wdt_init(void) ar7_wdt_prescale(prescale_value); ar7_wdt_update_margin(margin); - sema_init(&open_semaphore, 1); - rc = register_reboot_notifier(&ar7_wdt_notifier); if (rc) { printk(KERN_ERR DRVNAME -- GitLab From a6be8e5ff95e12190fd5e5158eb553255677292f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:13 +0100 Subject: [PATCH 0011/1024] [WATCHDOG 05/57] atp watchdog Switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/at32ap700x_wdt.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index ae0fca5e874..c5dc5e912fb 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -212,8 +212,8 @@ static struct watchdog_info at32_wdt_info = { /* * Handle commands from user-space. */ -static int at32_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long at32_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { int ret = -ENOTTY; int time; @@ -298,7 +298,7 @@ static ssize_t at32_wdt_write(struct file *file, const char __user *data, static const struct file_operations at32_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = at32_wdt_ioctl, + .unlocked_ioctl = at32_wdt_ioctl, .open = at32_wdt_open, .release = at32_wdt_close, .write = at32_wdt_write, @@ -391,7 +391,6 @@ static int __exit at32_wdt_remove(struct platform_device *pdev) wdt = NULL; platform_set_drvdata(pdev, NULL); } - return 0; } -- GitLab From 2760600da2a13d5a2a335ba012d0f3ad5df4c098 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:19 +0100 Subject: [PATCH 0012/1024] [WATCHDOG 06/57] at91: watchdog to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/at91rm9200_wdt.c | 108 +++++++++++++++--------------- 1 file changed, 54 insertions(+), 54 deletions(-) diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index 9ff9a956532..bb79f649dc7 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include @@ -31,11 +31,14 @@ static int wdt_time = WDT_DEFAULT_TIME; static int nowayout = WATCHDOG_NOWAYOUT; module_param(wdt_time, int, 0); -MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="__MODULE_STRING(WDT_DEFAULT_TIME) ")"); +MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" + __MODULE_STRING(WDT_DEFAULT_TIME) ")"); #ifdef CONFIG_WATCHDOG_NOWAYOUT module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); #endif @@ -46,7 +49,7 @@ static unsigned long at91wdt_busy; /* * Disable the watchdog. */ -static void inline at91_wdt_stop(void) +static inline void at91_wdt_stop(void) { at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN); } @@ -54,16 +57,17 @@ static void inline at91_wdt_stop(void) /* * Enable and reset the watchdog. */ -static void inline at91_wdt_start(void) +static inline void at91_wdt_start(void) { - at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN | (((65536 * wdt_time) >> 8) & AT91_ST_WDV)); + at91_sys_write(AT91_ST_WDMR, AT91_ST_EXTEN | AT91_ST_RSTEN | + (((65536 * wdt_time) >> 8) & AT91_ST_WDV)); at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } /* * Reload the watchdog timer. (ie, pat the watchdog) */ -static void inline at91_wdt_reload(void) +static inline void at91_wdt_reload(void) { at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } @@ -89,8 +93,9 @@ static int at91_wdt_open(struct inode *inode, struct file *file) */ static int at91_wdt_close(struct inode *inode, struct file *file) { + /* Disable the watchdog when file is closed */ if (!nowayout) - at91_wdt_stop(); /* Disable the watchdog when file is closed */ + at91_wdt_stop(); clear_bit(0, &at91wdt_busy); return 0; @@ -110,7 +115,8 @@ static int at91_wdt_settimeout(int new_time) if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) return -EINVAL; - /* Set new watchdog time. It will be used when at91_wdt_start() is called. */ + /* Set new watchdog time. It will be used when + at91_wdt_start() is called. */ wdt_time = new_time; return 0; } @@ -123,60 +129,52 @@ static struct watchdog_info at91_wdt_info = { /* * Handle commands from user-space. */ -static int at91_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long at91_wdt_ioct(struct file *file, + unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; int new_value; - switch(cmd) { - case WDIOC_KEEPALIVE: - at91_wdt_reload(); /* pat the watchdog */ - return 0; - - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_value, p)) - return -EFAULT; - - if (at91_wdt_settimeout(new_value)) - return -EINVAL; - - /* Enable new time value */ + switch (cmd) { + case WDIOC_KEEPALIVE: + at91_wdt_reload(); /* pat the watchdog */ + return 0; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &at91_wdt_info, + sizeof(at91_wdt_info)) ? -EFAULT : 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + if (at91_wdt_settimeout(new_value)) + return -EINVAL; + /* Enable new time value */ + at91_wdt_start(); + /* Return current value */ + return put_user(wdt_time, p); + case WDIOC_GETTIMEOUT: + return put_user(wdt_time, p); + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_SETOPTIONS: + if (get_user(new_value, p)) + return -EFAULT; + if (new_value & WDIOS_DISABLECARD) + at91_wdt_stop(); + if (new_value & WDIOS_ENABLECARD) at91_wdt_start(); - - /* Return current value */ - return put_user(wdt_time, p); - - case WDIOC_GETTIMEOUT: - return put_user(wdt_time, p); - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_SETOPTIONS: - if (get_user(new_value, p)) - return -EFAULT; - - if (new_value & WDIOS_DISABLECARD) - at91_wdt_stop(); - if (new_value & WDIOS_ENABLECARD) - at91_wdt_start(); - return 0; - - default: - return -ENOTTY; + return 0; + default: + return -ENOTTY; } } /* * Pat the watchdog whenever device is written to. */ -static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) +static ssize_t at91_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { at91_wdt_reload(); /* pat the watchdog */ return len; @@ -187,7 +185,7 @@ static ssize_t at91_wdt_write(struct file *file, const char *data, size_t len, l static const struct file_operations at91wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = at91_wdt_ioctl, + .unlocked_ioctl = at91_wdt_ioctl, .open = at91_wdt_open, .release = at91_wdt_close, .write = at91_wdt_write, @@ -211,7 +209,8 @@ static int __init at91wdt_probe(struct platform_device *pdev) if (res) return res; - printk("AT91 Watchdog Timer enabled (%d seconds%s)\n", wdt_time, nowayout ? ", nowayout" : ""); + printk(KERN_INFO "AT91 Watchdog Timer enabled (%d seconds%s)\n", + wdt_time, nowayout ? ", nowayout" : ""); return 0; } @@ -265,7 +264,8 @@ static struct platform_driver at91wdt_driver = { static int __init at91_wdt_init(void) { - /* Check that the heartbeat value is within range; if not reset to the default */ + /* Check that the heartbeat value is within range; + if not reset to the default */ if (at91_wdt_settimeout(wdt_time)) { at91_wdt_settimeout(WDT_DEFAULT_TIME); pr_info("at91_wdt: wdt_time value must be 1 <= wdt_time <= 256, using %d\n", wdt_time); -- GitLab From 6f932f18de7f0e22a1bdae5d0040eb5d8e4a6777 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:24 +0100 Subject: [PATCH 0013/1024] [WATCHDOG 07/57] cpu5_wdt: switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/cpu5wdt.c | 144 ++++++++++++++++++------------------- 1 file changed, 70 insertions(+), 74 deletions(-) diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c index df72f90123d..ec324e5e1c9 100644 --- a/drivers/watchdog/cpu5wdt.c +++ b/drivers/watchdog/cpu5wdt.c @@ -30,16 +30,16 @@ #include #include #include -#include -#include - +#include +#include #include /* adjustable parameters */ -static int verbose = 0; +static int verbose; static int port = 0x91; static int ticks = 10000; +static spinlock_t cpu5wdt_lock; #define PFX "cpu5wdt: " @@ -70,12 +70,13 @@ static struct { static void cpu5wdt_trigger(unsigned long unused) { - if ( verbose > 2 ) + if (verbose > 2) printk(KERN_DEBUG PFX "trigger at %i ticks\n", ticks); - if( cpu5wdt_device.running ) + if (cpu5wdt_device.running) ticks--; + spin_lock(&cpu5wdt_lock); /* keep watchdog alive */ outb(1, port + CPU5WDT_TRIGGER_REG); @@ -86,6 +87,7 @@ static void cpu5wdt_trigger(unsigned long unused) /* ticks doesn't matter anyway */ complete(&cpu5wdt_device.stop); } + spin_unlock(&cpu5wdt_lock); } @@ -93,14 +95,17 @@ static void cpu5wdt_reset(void) { ticks = cpu5wdt_device.default_ticks; - if ( verbose ) + if (verbose) printk(KERN_DEBUG PFX "reset (%i ticks)\n", (int) ticks); } static void cpu5wdt_start(void) { - if ( !cpu5wdt_device.queue ) { + unsigned long flags; + + spin_lock_irqsave(&cpu5wdt_lock, flags); + if (!cpu5wdt_device.queue) { cpu5wdt_device.queue = 1; outb(0, port + CPU5WDT_TIME_A_REG); outb(0, port + CPU5WDT_TIME_B_REG); @@ -111,18 +116,20 @@ static void cpu5wdt_start(void) } /* if process dies, counter is not decremented */ cpu5wdt_device.running++; + spin_unlock_irqrestore(&cpu5wdt_lock, flags); } static int cpu5wdt_stop(void) { - if ( cpu5wdt_device.running ) - cpu5wdt_device.running = 0; + unsigned long flags; + spin_lock_irqsave(&cpu5wdt_lock, flags); + if (cpu5wdt_device.running) + cpu5wdt_device.running = 0; ticks = cpu5wdt_device.default_ticks; - - if ( verbose ) + spin_unlock_irqrestore(&cpu5wdt_lock, flags); + if (verbose) printk(KERN_CRIT PFX "stop not possible\n"); - return -EIO; } @@ -130,9 +137,8 @@ static int cpu5wdt_stop(void) static int cpu5wdt_open(struct inode *inode, struct file *file) { - if ( test_and_set_bit(0, &cpu5wdt_device.inuse) ) + if (test_and_set_bit(0, &cpu5wdt_device.inuse)) return -EBUSY; - return nonseekable_open(inode, file); } @@ -142,67 +148,58 @@ static int cpu5wdt_release(struct inode *inode, struct file *file) return 0; } -static int cpu5wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long cpu5wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; + int __user *p = argp; unsigned int value; - static struct watchdog_info ident = - { + static struct watchdog_info ident = { .options = WDIOF_CARDRESET, .identity = "CPU5 WDT", }; - switch(cmd) { - case WDIOC_KEEPALIVE: - cpu5wdt_reset(); - break; - case WDIOC_GETSTATUS: - value = inb(port + CPU5WDT_STATUS_REG); - value = (value >> 2) & 1; - if ( copy_to_user(argp, &value, sizeof(int)) ) - return -EFAULT; - break; - case WDIOC_GETBOOTSTATUS: - if ( copy_to_user(argp, &value, sizeof(int)) ) - return -EFAULT; - break; - case WDIOC_GETSUPPORT: - if ( copy_to_user(argp, &ident, sizeof(ident)) ) - return -EFAULT; - break; - case WDIOC_SETOPTIONS: - if ( copy_from_user(&value, argp, sizeof(int)) ) - return -EFAULT; - switch(value) { - case WDIOS_ENABLECARD: - cpu5wdt_start(); - break; - case WDIOS_DISABLECARD: - return cpu5wdt_stop(); - default: - return -EINVAL; - } - break; - default: - return -ENOTTY; + switch (cmd) { + case WDIOC_KEEPALIVE: + cpu5wdt_reset(); + break; + case WDIOC_GETSTATUS: + value = inb(port + CPU5WDT_STATUS_REG); + value = (value >> 2) & 1; + return put_user(value, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + case WDIOC_SETOPTIONS: + if (get_user(value, p)) + return -EFAULT; + if (value & WDIOS_ENABLECARD) + cpu5wdt_start(); + if (value & WDIOS_DISABLECARD) + cpu5wdt_stop(); + break; + default: + return -ENOTTY; } return 0; } -static ssize_t cpu5wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t cpu5wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { - if ( !count ) + if (!count) return -EIO; - cpu5wdt_reset(); - return count; } static const struct file_operations cpu5wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = cpu5wdt_ioctl, + .unlocked_ioctl = cpu5wdt_ioctl, .open = cpu5wdt_open, .write = cpu5wdt_write, .release = cpu5wdt_release, @@ -221,37 +218,36 @@ static int __devinit cpu5wdt_init(void) unsigned int val; int err; - if ( verbose ) - printk(KERN_DEBUG PFX "port=0x%x, verbose=%i\n", port, verbose); + if (verbose) + printk(KERN_DEBUG PFX + "port=0x%x, verbose=%i\n", port, verbose); - if ( !request_region(port, CPU5WDT_EXTENT, PFX) ) { + init_completion(&cpu5wdt_device.stop); + spin_lock_init(&cpu5wdt_lock); + cpu5wdt_device.queue = 0; + setup_timer(&cpu5wdt_device.timer, cpu5wdt_trigger, 0); + cpu5wdt_device.default_ticks = ticks; + + if (!request_region(port, CPU5WDT_EXTENT, PFX)) { printk(KERN_ERR PFX "request_region failed\n"); err = -EBUSY; goto no_port; } - if ( (err = misc_register(&cpu5wdt_misc)) < 0 ) { - printk(KERN_ERR PFX "misc_register failed\n"); - goto no_misc; - } - /* watchdog reboot? */ val = inb(port + CPU5WDT_STATUS_REG); val = (val >> 2) & 1; - if ( !val ) + if (!val) printk(KERN_INFO PFX "sorry, was my fault\n"); - init_completion(&cpu5wdt_device.stop); - cpu5wdt_device.queue = 0; - - clear_bit(0, &cpu5wdt_device.inuse); - - setup_timer(&cpu5wdt_device.timer, cpu5wdt_trigger, 0); + err = misc_register(&cpu5wdt_misc); + if (err < 0) { + printk(KERN_ERR PFX "misc_register failed\n"); + goto no_misc; + } - cpu5wdt_device.default_ticks = ticks; printk(KERN_INFO PFX "init success\n"); - return 0; no_misc: @@ -267,7 +263,7 @@ static int __devinit cpu5wdt_init_module(void) static void __devexit cpu5wdt_exit(void) { - if ( cpu5wdt_device.queue ) { + if (cpu5wdt_device.queue) { cpu5wdt_device.queue = 0; wait_for_completion(&cpu5wdt_device.stop); } -- GitLab From f78b0a8f27618b492dd2e1a8f5e4ce6f89b3c961 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:30 +0100 Subject: [PATCH 0014/1024] [WATCHDOG 08/57] davinci_wdt: unlocked_ioctl and check locking Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/davinci_wdt.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c index 1782c79eff0..926b59c4118 100644 --- a/drivers/watchdog/davinci_wdt.c +++ b/drivers/watchdog/davinci_wdt.c @@ -22,10 +22,10 @@ #include #include #include +#include +#include #include -#include -#include #define MODULE_NAME "DAVINCI-WDT: " @@ -143,9 +143,8 @@ static struct watchdog_info ident = { .identity = "DaVinci Watchdog", }; -static int -davinci_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long davinci_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { int ret = -ENOTTY; @@ -184,7 +183,7 @@ static const struct file_operations davinci_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = davinci_wdt_write, - .ioctl = davinci_wdt_ioctl, + .unlocked_ioctl = davinci_wdt_ioctl, .open = davinci_wdt_open, .release = davinci_wdt_release, }; -- GitLab From f339e2ac9d65656e6d18c92b1ddc4a7801373318 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:35 +0100 Subject: [PATCH 0015/1024] [WATCHDOG 09/57] ep93xx_wdt: unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ep93xx_wdt.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c index 0e4787a0bb8..cdcdd11173a 100644 --- a/drivers/watchdog/ep93xx_wdt.c +++ b/drivers/watchdog/ep93xx_wdt.c @@ -28,9 +28,9 @@ #include #include #include +#include #include -#include #define WDT_VERSION "0.3" #define PFX "ep93xx_wdt: " @@ -136,9 +136,8 @@ static struct watchdog_info ident = { .identity = "EP93xx Watchdog", }; -static int -ep93xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long ep93xx_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { int ret = -ENOTTY; @@ -174,8 +173,8 @@ static int ep93xx_wdt_release(struct inode *inode, struct file *file) if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) wdt_shutdown(); else - printk(KERN_CRIT PFX "Device closed unexpectedly - " - "timer will not stop\n"); + printk(KERN_CRIT PFX + "Device closed unexpectedly - timer will not stop\n"); clear_bit(WDT_IN_USE, &wdt_status); clear_bit(WDT_OK_TO_CLOSE, &wdt_status); @@ -186,7 +185,7 @@ static int ep93xx_wdt_release(struct inode *inode, struct file *file) static const struct file_operations ep93xx_wdt_fops = { .owner = THIS_MODULE, .write = ep93xx_wdt_write, - .ioctl = ep93xx_wdt_ioctl, + .unlocked_ioctl = ep93xx_wdt_ioctl, .open = ep93xx_wdt_open, .release = ep93xx_wdt_release, }; @@ -243,7 +242,9 @@ module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<=timeout<=3600, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); MODULE_AUTHOR("Ray Lehtiniemi ," "Alessandro Zummo "); -- GitLab From 89ea2429873e69201173f3606ab04d751f737cc4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:41 +0100 Subject: [PATCH 0016/1024] [WATCHDOG 10/57] eurotechwdt: unlocked_ioctl, code lock check and tidy Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/eurotechwdt.c | 57 +++++++++++++++++++++------------- 1 file changed, 36 insertions(+), 21 deletions(-) diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c index b14e9d1f164..b94e6ef4c7a 100644 --- a/drivers/watchdog/eurotechwdt.c +++ b/drivers/watchdog/eurotechwdt.c @@ -56,14 +56,15 @@ #include #include #include +#include +#include -#include -#include #include static unsigned long eurwdt_is_open; static int eurwdt_timeout; static char eur_expect_close; +static spinlock_t eurwdt_lock; /* * You must set these - there is no sane way to probe for this board. @@ -78,7 +79,9 @@ static char *ev = "int"; static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Some symbolic names @@ -137,7 +140,8 @@ static void eurwdt_activate_timer(void) { eurwdt_disable_timer(); eurwdt_write_reg(WDT_CTRL_REG, 0x01); /* activate the WDT */ - eurwdt_write_reg(WDT_OUTPIN_CFG, !strcmp("int", ev) ? WDT_EVENT_INT : WDT_EVENT_REBOOT); + eurwdt_write_reg(WDT_OUTPIN_CFG, + !strcmp("int", ev) ? WDT_EVENT_INT : WDT_EVENT_REBOOT); /* Setting interrupt line */ if (irq == 2 || irq > 15 || irq < 0) { @@ -206,21 +210,21 @@ size_t count, loff_t *ppos) for (i = 0; i != count; i++) { char c; - if(get_user(c, buf+i)) + if (get_user(c, buf+i)) return -EFAULT; if (c == 'V') eur_expect_close = 42; } } + spin_lock(&eurwdt_lock); eurwdt_ping(); /* the default timeout */ + spin_unlock(&eurwdt_lock); } - return count; } /** * eurwdt_ioctl: - * @inode: inode of the device * @file: file handle to the device * @cmd: watchdog command * @arg: argument pointer @@ -229,13 +233,14 @@ size_t count, loff_t *ppos) * according to their available features. */ -static int eurwdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long eurwdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "WDT Eurotech CPU-1220/1410", }; @@ -243,7 +248,7 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file, int time; int options, retval = -EINVAL; - switch(cmd) { + switch (cmd) { default: return -ENOTTY; @@ -255,7 +260,9 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file, return put_user(0, p); case WDIOC_KEEPALIVE: + spin_lock(&eurwdt_lock); eurwdt_ping(); + spin_unlock(&eurwdt_lock); return 0; case WDIOC_SETTIMEOUT: @@ -266,8 +273,10 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file, if (time < 0 || time > 255) return -EINVAL; + spin_lock(&eurwdt_lock); eurwdt_timeout = time; eurwdt_set_timeout(time); + spin_unlock(&eurwdt_lock); /* Fall */ case WDIOC_GETTIMEOUT: @@ -276,6 +285,7 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file, case WDIOC_SETOPTIONS: if (get_user(options, p)) return -EFAULT; + spin_lock(&eurwdt_lock); if (options & WDIOS_DISABLECARD) { eurwdt_disable_timer(); retval = 0; @@ -285,6 +295,7 @@ static int eurwdt_ioctl(struct inode *inode, struct file *file, eurwdt_ping(); retval = 0; } + spin_unlock(&eurwdt_lock); return retval; } } @@ -322,10 +333,11 @@ static int eurwdt_open(struct inode *inode, struct file *file) static int eurwdt_release(struct inode *inode, struct file *file) { - if (eur_expect_close == 42) { + if (eur_expect_close == 42) eurwdt_disable_timer(); - } else { - printk(KERN_CRIT "eurwdt: Unexpected close, not stopping watchdog!\n"); + else { + printk(KERN_CRIT + "eurwdt: Unexpected close, not stopping watchdog!\n"); eurwdt_ping(); } clear_bit(0, &eurwdt_is_open); @@ -362,11 +374,11 @@ static int eurwdt_notify_sys(struct notifier_block *this, unsigned long code, static const struct file_operations eurwdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = eurwdt_write, - .ioctl = eurwdt_ioctl, - .open = eurwdt_open, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = eurwdt_write, + .unlocked_ioctl = eurwdt_ioctl, + .open = eurwdt_open, .release = eurwdt_release, }; @@ -419,7 +431,7 @@ static int __init eurwdt_init(void) int ret; ret = request_irq(irq, eurwdt_interrupt, IRQF_DISABLED, "eurwdt", NULL); - if(ret) { + if (ret) { printk(KERN_ERR "eurwdt: IRQ %d is not free.\n", irq); goto out; } @@ -432,10 +444,13 @@ static int __init eurwdt_init(void) ret = register_reboot_notifier(&eurwdt_notifier); if (ret) { - printk(KERN_ERR "eurwdt: can't register reboot notifier (err=%d)\n", ret); + printk(KERN_ERR + "eurwdt: can't register reboot notifier (err=%d)\n", ret); goto outreg; } + spin_lock_init(&eurwdt_lock); + ret = misc_register(&eurwdt_miscdev); if (ret) { printk(KERN_ERR "eurwdt: can't misc_register on minor=%d\n", -- GitLab From 6513e2a03887c6c9bd0b30593827a01ce3f7b542 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:46 +0100 Subject: [PATCH 0017/1024] [WATCHDOG 11/57] hpwdt: couple of include cleanups clean-up includes Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 6a63535fc04..45bf66c7245 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -39,9 +39,9 @@ #include #include #include -#include +#include #include -#include +#include #define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */ #define CRU_BIOS_SIGNATURE_VALUE 0x55524324 -- GitLab From 2e43ba73d4e2d34ddb9843e30480be3752514c16 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:52 +0100 Subject: [PATCH 0018/1024] [WATCHDOG 12/57] ib700wdt: clean up and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ib700wdt.c | 103 ++++++++++++++++++------------------ 1 file changed, 52 insertions(+), 51 deletions(-) diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c index 4b89f401691..805a54b02aa 100644 --- a/drivers/watchdog/ib700wdt.c +++ b/drivers/watchdog/ib700wdt.c @@ -42,8 +42,8 @@ #include #include -#include -#include +#include +#include #include static struct platform_device *ibwdt_platform_device; @@ -120,7 +120,9 @@ static int wd_margin = WD_TIMO; static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* @@ -165,8 +167,8 @@ ibwdt_set_heartbeat(int t) * /dev/watchdog handling */ -static ssize_t -ibwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t ibwdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { @@ -188,77 +190,71 @@ ibwdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppo return count; } -static int -ibwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { int new_margin; void __user *argp = (void __user *)arg; int __user *p = argp; static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "IB700 WDT", }; switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) - return -EFAULT; - break; + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + return put_user(0, p); case WDIOC_KEEPALIVE: - ibwdt_ping(); - break; + ibwdt_ping(); + break; case WDIOC_SETTIMEOUT: - if (get_user(new_margin, p)) - return -EFAULT; - if (ibwdt_set_heartbeat(new_margin)) - return -EINVAL; - ibwdt_ping(); - /* Fall */ + if (get_user(new_margin, p)) + return -EFAULT; + if (ibwdt_set_heartbeat(new_margin)) + return -EINVAL; + ibwdt_ping(); + /* Fall */ case WDIOC_GETTIMEOUT: - return put_user(wd_times[wd_margin], p); + return put_user(wd_times[wd_margin], p); case WDIOC_SETOPTIONS: { - int options, retval = -EINVAL; + int options, retval = -EINVAL; - if (get_user(options, p)) - return -EFAULT; + if (get_user(options, p)) + return -EFAULT; - if (options & WDIOS_DISABLECARD) { - ibwdt_disable(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) { - ibwdt_ping(); - retval = 0; - } - - return retval; + if (options & WDIOS_DISABLECARD) { + ibwdt_disable(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + ibwdt_ping(); + retval = 0; + } + return retval; } - default: - return -ENOTTY; + return -ENOTTY; } return 0; } -static int -ibwdt_open(struct inode *inode, struct file *file) +static int ibwdt_open(struct inode *inode, struct file *file) { - if (test_and_set_bit(0, &ibwdt_is_open)) { + if (test_and_set_bit(0, &ibwdt_is_open)) return -EBUSY; - } if (nowayout) __module_get(THIS_MODULE); @@ -273,7 +269,8 @@ ibwdt_close(struct inode *inode, struct file *file) if (expect_close == 42) { ibwdt_disable(); } else { - printk(KERN_CRIT PFX "WDT device closed unexpectedly. WDT will not stop!\n"); + printk(KERN_CRIT PFX + "WDT device closed unexpectedly. WDT will not stop!\n"); ibwdt_ping(); } clear_bit(0, &ibwdt_is_open); @@ -289,7 +286,7 @@ static const struct file_operations ibwdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = ibwdt_write, - .ioctl = ibwdt_ioctl, + .unlocked_ioctl = ibwdt_ioctl, .open = ibwdt_open, .release = ibwdt_close, }; @@ -310,21 +307,23 @@ static int __devinit ibwdt_probe(struct platform_device *dev) #if WDT_START != WDT_STOP if (!request_region(WDT_STOP, 1, "IB700 WDT")) { - printk (KERN_ERR PFX "STOP method I/O %X is not available.\n", WDT_STOP); + printk(KERN_ERR PFX "STOP method I/O %X is not available.\n", + WDT_STOP); res = -EIO; goto out_nostopreg; } #endif if (!request_region(WDT_START, 1, "IB700 WDT")) { - printk (KERN_ERR PFX "START method I/O %X is not available.\n", WDT_START); + printk(KERN_ERR PFX "START method I/O %X is not available.\n", + WDT_START); res = -EIO; goto out_nostartreg; } res = misc_register(&ibwdt_miscdev); if (res) { - printk (KERN_ERR PFX "failed to register misc device\n"); + printk(KERN_ERR PFX "failed to register misc device\n"); goto out_nomisc; } return 0; @@ -342,9 +341,9 @@ out_nostopreg: static int __devexit ibwdt_remove(struct platform_device *dev) { misc_deregister(&ibwdt_miscdev); - release_region(WDT_START,1); + release_region(WDT_START, 1); #if WDT_START != WDT_STOP - release_region(WDT_STOP,1); + release_region(WDT_STOP, 1); #endif return 0; } @@ -369,13 +368,15 @@ static int __init ibwdt_init(void) { int err; - printk(KERN_INFO PFX "WDT driver for IB700 single board computer initialising.\n"); + printk(KERN_INFO PFX + "WDT driver for IB700 single board computer initialising.\n"); err = platform_driver_register(&ibwdt_driver); if (err) return err; - ibwdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); + ibwdt_platform_device = platform_device_register_simple(DRV_NAME, + -1, NULL, 0); if (IS_ERR(ibwdt_platform_device)) { err = PTR_ERR(ibwdt_platform_device); goto unreg_platform_driver; -- GitLab From 0829291ea4a25c3c2ca4fba34aa38a1ee1e0b94b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:05:57 +0100 Subject: [PATCH 0019/1024] [WATCHDOG 13/57] i6300esb: Style, unlocked_ioctl, cleanup Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/i6300esb.c | 342 ++++++++++++++++++------------------ 1 file changed, 167 insertions(+), 175 deletions(-) diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c index ca44fd9b19b..01a283f7a27 100644 --- a/drivers/watchdog/i6300esb.c +++ b/drivers/watchdog/i6300esb.c @@ -38,9 +38,8 @@ #include #include #include - -#include -#include +#include +#include /* Module and version information */ #define ESB_VERSION "0.03" @@ -59,17 +58,17 @@ #define ESB_RELOAD_REG BASEADDR + 0x0c /* Reload register */ /* Lock register bits */ -#define ESB_WDT_FUNC ( 0x01 << 2 ) /* Watchdog functionality */ -#define ESB_WDT_ENABLE ( 0x01 << 1 ) /* Enable WDT */ -#define ESB_WDT_LOCK ( 0x01 << 0 ) /* Lock (nowayout) */ +#define ESB_WDT_FUNC (0x01 << 2) /* Watchdog functionality */ +#define ESB_WDT_ENABLE (0x01 << 1) /* Enable WDT */ +#define ESB_WDT_LOCK (0x01 << 0) /* Lock (nowayout) */ /* Config register bits */ -#define ESB_WDT_REBOOT ( 0x01 << 5 ) /* Enable reboot on timeout */ -#define ESB_WDT_FREQ ( 0x01 << 2 ) /* Decrement frequency */ -#define ESB_WDT_INTTYPE ( 0x11 << 0 ) /* Interrupt type on timer1 timeout */ +#define ESB_WDT_REBOOT (0x01 << 5) /* Enable reboot on timeout */ +#define ESB_WDT_FREQ (0x01 << 2) /* Decrement frequency */ +#define ESB_WDT_INTTYPE (0x11 << 0) /* Interrupt type on timer1 timeout */ /* Reload register bits */ -#define ESB_WDT_RELOAD ( 0x01 << 8 ) /* prevent timeout */ +#define ESB_WDT_RELOAD (0x01 << 8) /* prevent timeout */ /* Magic constants */ #define ESB_UNLOCK1 0x80 /* Step 1 to unlock reset registers */ @@ -84,14 +83,20 @@ static unsigned short triggered; /* The status of the watchdog upon boot */ static char esb_expect_close; /* module parameters */ -#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat (1 Date: Mon, 19 May 2008 14:06:03 +0100 Subject: [PATCH 0020/1024] [WATCHDOG 14/57] ibmasr: coding style, locking verify There is a new #if 0 section here which is a suggested fix for the horrible PCI hack in the existing code. Would be good if someone with a box that uses this device could test it. Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ibmasr.c | 149 ++++++++++++++++++++++---------------- 1 file changed, 87 insertions(+), 62 deletions(-) diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c index 94155f6136c..6824bf80b37 100644 --- a/drivers/watchdog/ibmasr.c +++ b/drivers/watchdog/ibmasr.c @@ -19,9 +19,8 @@ #include #include #include - -#include -#include +#include +#include enum { @@ -70,10 +69,13 @@ static char asr_expect_close; static unsigned int asr_type, asr_base, asr_length; static unsigned int asr_read_addr, asr_write_addr; static unsigned char asr_toggle_mask, asr_disable_mask; +static spinlock_t asr_lock; -static void asr_toggle(void) +static void __asr_toggle(void) { - unsigned char reg = inb(asr_read_addr); + unsigned char reg; + + reg = inb(asr_read_addr); outb(reg & ~asr_toggle_mask, asr_write_addr); reg = inb(asr_read_addr); @@ -83,12 +85,21 @@ static void asr_toggle(void) outb(reg & ~asr_toggle_mask, asr_write_addr); reg = inb(asr_read_addr); + spin_unlock(&asr_lock); +} + +static void asr_toggle(void) +{ + spin_lock(&asr_lock); + __asr_toggle(); + spin_unlock(&asr_lock); } static void asr_enable(void) { unsigned char reg; + spin_lock(&asr_lock); if (asr_type == ASMTYPE_TOPAZ) { /* asr_write_addr == asr_read_addr */ reg = inb(asr_read_addr); @@ -99,17 +110,21 @@ static void asr_enable(void) * First make sure the hardware timer is reset by toggling * ASR hardware timer line. */ - asr_toggle(); + __asr_toggle(); reg = inb(asr_read_addr); outb(reg & ~asr_disable_mask, asr_write_addr); } reg = inb(asr_read_addr); + spin_unlock(&asr_lock); } static void asr_disable(void) { - unsigned char reg = inb(asr_read_addr); + unsigned char reg; + + spin_lock(&asr_lock); + reg = inb(asr_read_addr); if (asr_type == ASMTYPE_TOPAZ) /* asr_write_addr == asr_read_addr */ @@ -122,6 +137,7 @@ static void asr_disable(void) outb(reg | asr_disable_mask, asr_write_addr); } reg = inb(asr_read_addr); + spin_unlock(&asr_lock); } static int __init asr_get_base_address(void) @@ -133,7 +149,8 @@ static int __init asr_get_base_address(void) switch (asr_type) { case ASMTYPE_TOPAZ: - /* SELECT SuperIO CHIP FOR QUERYING (WRITE 0x07 TO BOTH 0x2E and 0x2F) */ + /* SELECT SuperIO CHIP FOR QUERYING + (WRITE 0x07 TO BOTH 0x2E and 0x2F) */ outb(0x07, 0x2e); outb(0x07, 0x2f); @@ -154,14 +171,26 @@ static int __init asr_get_base_address(void) case ASMTYPE_JASPER: type = "Jaspers "; - - /* FIXME: need to use pci_config_lock here, but it's not exported */ +#if 0 + u32 r; + /* Suggested fix */ + pdev = pci_get_bus_and_slot(0, DEVFN(0x1f, 0)); + if (pdev == NULL) + return -ENODEV; + pci_read_config_dword(pdev, 0x58, &r); + asr_base = r & 0xFFFE; + pci_dev_put(pdev); +#else + /* FIXME: need to use pci_config_lock here, + but it's not exported */ /* spin_lock_irqsave(&pci_config_lock, flags);*/ /* Select the SuperIO chip in the PCI I/O port register */ outl(0x8000f858, 0xcf8); + /* BUS 0, Slot 1F, fnc 0, offset 58 */ + /* * Read the base address for the SuperIO chip. * Only the lower 16 bits are valid, but the address is word @@ -170,7 +199,7 @@ static int __init asr_get_base_address(void) asr_base = inl(0xcfc) & 0xfffe; /* spin_unlock_irqrestore(&pci_config_lock, flags);*/ - +#endif asr_read_addr = asr_write_addr = asr_base + JASPER_ASR_REG_OFFSET; asr_toggle_mask = JASPER_ASR_TOGGLE_MASK; @@ -241,11 +270,10 @@ static ssize_t asr_write(struct file *file, const char __user *buf, return count; } -static int asr_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long asr_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { static const struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | + .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, .identity = "IBM ASR" }; @@ -254,53 +282,45 @@ static int asr_ioctl(struct inode *inode, struct file *file, int heartbeat; switch (cmd) { - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident)) ? - -EFAULT : 0; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_KEEPALIVE: + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + asr_toggle(); + return 0; + /* + * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT + * and WDIOC_GETTIMEOUT always returns 256. + */ + case WDIOC_GETTIMEOUT: + heartbeat = 256; + return put_user(heartbeat, p); + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; + if (get_user(new_options, p)) + return -EFAULT; + if (new_options & WDIOS_DISABLECARD) { + asr_disable(); + retval = 0; + } + if (new_options & WDIOS_ENABLECARD) { + asr_enable(); asr_toggle(); - return 0; - - /* - * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT - * and WDIOC_GETTIMEOUT always returns 256. - */ - case WDIOC_GETTIMEOUT: - heartbeat = 256; - return put_user(heartbeat, p); - - case WDIOC_SETOPTIONS: { - int new_options, retval = -EINVAL; - - if (get_user(new_options, p)) - return -EFAULT; - - if (new_options & WDIOS_DISABLECARD) { - asr_disable(); - retval = 0; - } - - if (new_options & WDIOS_ENABLECARD) { - asr_enable(); - asr_toggle(); - retval = 0; - } - - return retval; + retval = 0; } + return retval; + } + default: + return -ENOTTY; } - - return -ENOTTY; } static int asr_open(struct inode *inode, struct file *file) { - if(test_and_set_bit(0, &asr_is_open)) + if (test_and_set_bit(0, &asr_is_open)) return -EBUSY; asr_toggle(); @@ -314,7 +334,8 @@ static int asr_release(struct inode *inode, struct file *file) if (asr_expect_close == 42) asr_disable(); else { - printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n"); + printk(KERN_CRIT PFX + "unexpected close, not stopping watchdog!\n"); asr_toggle(); } clear_bit(0, &asr_is_open); @@ -323,12 +344,12 @@ static int asr_release(struct inode *inode, struct file *file) } static const struct file_operations asr_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = asr_write, - .ioctl = asr_ioctl, - .open = asr_open, - .release = asr_release, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = asr_write, + .unlocked_ioctl = asr_ioctl, + .open = asr_open, + .release = asr_release, }; static struct miscdevice asr_miscdev = { @@ -367,6 +388,8 @@ static int __init ibmasr_init(void) if (!asr_type) return -ENODEV; + spin_lock_init(&asr_lock); + rc = asr_get_base_address(); if (rc) return rc; @@ -395,7 +418,9 @@ module_init(ibmasr_init); module_exit(ibmasr_exit); module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); MODULE_DESCRIPTION("IBM Automatic Server Restart driver"); MODULE_AUTHOR("Andrey Panin"); -- GitLab From 9b9dbcca3fa13acd64dbb9258bfe997809d6073b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:08 +0100 Subject: [PATCH 0021/1024] [WATCHDOG 15/57] indydog: Clean up and tidy Switch to unlocked_ioctl as well Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/indydog.c | 114 ++++++++++++++++++++----------------- 1 file changed, 62 insertions(+), 52 deletions(-) diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c index 788245bdaa7..0bffea37404 100644 --- a/drivers/watchdog/indydog.c +++ b/drivers/watchdog/indydog.c @@ -1,7 +1,8 @@ /* * IndyDog 0.3 A Hardware Watchdog Device for SGI IP22 * - * (c) Copyright 2002 Guido Guenther , All Rights Reserved. + * (c) Copyright 2002 Guido Guenther , + * All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -22,32 +23,42 @@ #include #include #include -#include +#include #include #define PFX "indydog: " -static int indydog_alive; +static unsigned long indydog_alive; +static spinlock_t indydog_lock; #define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static void indydog_start(void) { - u32 mc_ctrl0 = sgimc->cpuctrl0; + u32 mc_ctrl0; + spin_lock(&indydog_lock); + mc_ctrl0 = sgimc->cpuctrl0; mc_ctrl0 = sgimc->cpuctrl0 | SGIMC_CCTRL0_WDOG; sgimc->cpuctrl0 = mc_ctrl0; + spin_unlock(&indydog_lock); } static void indydog_stop(void) { - u32 mc_ctrl0 = sgimc->cpuctrl0; + u32 mc_ctrl0; + spin_lock(&indydog_lock); + + mc_ctrl0 = sgimc->cpuctrl0; mc_ctrl0 &= ~SGIMC_CCTRL0_WDOG; sgimc->cpuctrl0 = mc_ctrl0; + spin_unlock(&indydog_lock); printk(KERN_INFO PFX "Stopped watchdog timer.\n"); } @@ -62,7 +73,7 @@ static void indydog_ping(void) */ static int indydog_open(struct inode *inode, struct file *file) { - if (indydog_alive) + if (test_and_set_bit(0, &indydog_alive)) return -EBUSY; if (nowayout) @@ -84,23 +95,21 @@ static int indydog_release(struct inode *inode, struct file *file) * Lock it in if it's a module and we defined ...NOWAYOUT */ if (!nowayout) indydog_stop(); /* Turn the WDT off */ - - indydog_alive = 0; - + clear_bit(0, &indydog_alive); return 0; } -static ssize_t indydog_write(struct file *file, const char *data, size_t len, loff_t *ppos) +static ssize_t indydog_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { /* Refresh the timer. */ - if (len) { + if (len) indydog_ping(); - } return len; } -static int indydog_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long indydog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int options, retval = -EINVAL; static struct watchdog_info ident = { @@ -111,42 +120,40 @@ static int indydog_ioctl(struct inode *inode, struct file *file, }; switch (cmd) { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - if (copy_to_user((struct watchdog_info *)arg, - &ident, sizeof(ident))) - return -EFAULT; - return 0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0,(int *)arg); - case WDIOC_KEEPALIVE: - indydog_ping(); - return 0; - case WDIOC_GETTIMEOUT: - return put_user(WATCHDOG_TIMEOUT,(int *)arg); - case WDIOC_SETOPTIONS: - { - if (get_user(options, (int *)arg)) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) { - indydog_stop(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) { - indydog_start(); - retval = 0; - } - - return retval; + case WDIOC_GETSUPPORT: + if (copy_to_user((struct watchdog_info *)arg, + &ident, sizeof(ident))) + return -EFAULT; + return 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, (int *)arg); + case WDIOC_KEEPALIVE: + indydog_ping(); + return 0; + case WDIOC_GETTIMEOUT: + return put_user(WATCHDOG_TIMEOUT, (int *)arg); + case WDIOC_SETOPTIONS: + { + if (get_user(options, (int *)arg)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + indydog_stop(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + indydog_start(); + retval = 0; } + return retval; + } + default: + return -ENOTTY; } } -static int indydog_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +static int indydog_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) { if (code == SYS_DOWN || code == SYS_HALT) indydog_stop(); /* Turn the WDT off */ @@ -158,7 +165,7 @@ static const struct file_operations indydog_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = indydog_write, - .ioctl = indydog_ioctl, + .unlocked_ioctl = indydog_ioctl, .open = indydog_open, .release = indydog_release, }; @@ -180,17 +187,20 @@ static int __init watchdog_init(void) { int ret; + spin_lock_init(&indydog_lock); + ret = register_reboot_notifier(&indydog_notifier); if (ret) { - printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - ret); + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", ret); return ret; } ret = misc_register(&indydog_miscdev); if (ret) { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); unregister_reboot_notifier(&indydog_notifier); return ret; } -- GitLab From 02e3814e193ff798676793016851bc222366dc6a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:14 +0100 Subject: [PATCH 0022/1024] [WATCHDOG 16/57] iop: watchdog switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/iop_wdt.c | 46 ++++++++++++++++++++------------------ 1 file changed, 24 insertions(+), 22 deletions(-) diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c index bbbd91af754..e54c888d2af 100644 --- a/drivers/watchdog/iop_wdt.c +++ b/drivers/watchdog/iop_wdt.c @@ -37,6 +37,7 @@ static int nowayout = WATCHDOG_NOWAYOUT; static unsigned long wdt_status; static unsigned long boot_status; +static spinlock_t wdt_lock; #define WDT_IN_USE 0 #define WDT_OK_TO_CLOSE 1 @@ -68,8 +69,10 @@ static void wdt_enable(void) /* Arm and enable the Timer to starting counting down from 0xFFFF.FFFF * Takes approx. 10.7s to timeout */ + spin_lock(&wdt_lock); write_wdtcr(IOP_WDTCR_EN_ARM); write_wdtcr(IOP_WDTCR_EN); + spin_unlock(&wdt_lock); } /* returns 0 if the timer was successfully disabled */ @@ -77,9 +80,11 @@ static int wdt_disable(void) { /* Stop Counting */ if (wdt_supports_disable()) { + spin_lock(&wdt_lock); write_wdtcr(IOP_WDTCR_DIS_ARM); write_wdtcr(IOP_WDTCR_DIS); clear_bit(WDT_ENABLED, &wdt_status); + spin_unlock(&wdt_lock); printk(KERN_INFO "WATCHDOG: Disabled\n"); return 0; } else @@ -92,16 +97,12 @@ static int iop_wdt_open(struct inode *inode, struct file *file) return -EBUSY; clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - wdt_enable(); - set_bit(WDT_ENABLED, &wdt_status); - return nonseekable_open(inode, file); } -static ssize_t -iop_wdt_write(struct file *file, const char *data, size_t len, +static ssize_t iop_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) { if (len) { @@ -121,41 +122,39 @@ iop_wdt_write(struct file *file, const char *data, size_t len, } wdt_enable(); } - return len; } -static struct watchdog_info ident = { +static const struct watchdog_info ident = { .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, .identity = "iop watchdog", }; -static int -iop_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long iop_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { int options; int ret = -ENOTTY; + int __user *argp = (int __user *)arg; switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user - ((struct watchdog_info *)arg, &ident, sizeof ident)) + if (copy_to_user(argp, &ident, sizeof ident)) ret = -EFAULT; else ret = 0; break; case WDIOC_GETSTATUS: - ret = put_user(0, (int *)arg); + ret = put_user(0, argp); break; case WDIOC_GETBOOTSTATUS: - ret = put_user(boot_status, (int *)arg); + ret = put_user(boot_status, argp); break; case WDIOC_GETTIMEOUT: - ret = put_user(iop_watchdog_timeout(), (int *)arg); + ret = put_user(iop_watchdog_timeout(), argp); break; case WDIOC_KEEPALIVE: @@ -177,14 +176,12 @@ iop_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, } else ret = 0; } - if (options & WDIOS_ENABLECARD) { wdt_enable(); ret = 0; } break; } - return ret; } @@ -214,7 +211,7 @@ static const struct file_operations iop_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = iop_wdt_write, - .ioctl = iop_wdt_ioctl, + .unlocked_ioctl = iop_wdt_ioctl, .open = iop_wdt_open, .release = iop_wdt_release, }; @@ -229,10 +226,8 @@ static int __init iop_wdt_init(void) { int ret; - ret = misc_register(&iop_wdt_miscdev); - if (ret == 0) - printk("iop watchdog timer: timeout %lu sec\n", - iop_watchdog_timeout()); + spin_lock_init(&wdt_lock); + /* check if the reset was caused by the watchdog timer */ boot_status = (read_rcsr() & IOP_RCSR_WDT) ? WDIOF_CARDRESET : 0; @@ -242,6 +237,13 @@ static int __init iop_wdt_init(void) */ write_wdtsr(IOP13XX_WDTCR_IB_RESET); + /* Register after we have the device set up so we cannot race + with an open */ + ret = misc_register(&iop_wdt_miscdev); + if (ret == 0) + printk("iop watchdog timer: timeout %lu sec\n", + iop_watchdog_timeout()); + return ret; } -- GitLab From 30abcec14573e3462f18d63f4a8f154a23689f1b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:19 +0100 Subject: [PATCH 0023/1024] [WATCHDOG 17/57] it8712f: unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/it8712f_wdt.c | 77 ++++++++++++---------------------- 1 file changed, 27 insertions(+), 50 deletions(-) diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c index 445b7e81211..51bfd572183 100644 --- a/drivers/watchdog/it8712f_wdt.c +++ b/drivers/watchdog/it8712f_wdt.c @@ -30,9 +30,8 @@ #include #include #include - -#include -#include +#include +#include #define NAME "it8712f_wdt" @@ -50,7 +49,7 @@ static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); -static struct semaphore it8712f_wdt_sem; +static unsigned long wdt_open; static unsigned expect_close; static spinlock_t io_lock; static unsigned char revision; @@ -86,22 +85,19 @@ static unsigned short address; #define WDT_OUT_PWROK 0x10 #define WDT_OUT_KRST 0x40 -static int -superio_inb(int reg) +static int superio_inb(int reg) { outb(reg, REG); return inb(VAL); } -static void -superio_outb(int val, int reg) +static void superio_outb(int val, int reg) { outb(reg, REG); outb(val, VAL); } -static int -superio_inw(int reg) +static int superio_inw(int reg) { int val; outb(reg++, REG); @@ -111,15 +107,13 @@ superio_inw(int reg) return val; } -static inline void -superio_select(int ldn) +static inline void superio_select(int ldn) { outb(LDN, REG); outb(ldn, VAL); } -static inline void -superio_enter(void) +static inline void superio_enter(void) { spin_lock(&io_lock); outb(0x87, REG); @@ -128,22 +122,19 @@ superio_enter(void) outb(0x55, REG); } -static inline void -superio_exit(void) +static inline void superio_exit(void) { outb(0x02, REG); outb(0x02, VAL); spin_unlock(&io_lock); } -static inline void -it8712f_wdt_ping(void) +static inline void it8712f_wdt_ping(void) { inb(address); } -static void -it8712f_wdt_update_margin(void) +static void it8712f_wdt_update_margin(void) { int config = WDT_OUT_KRST | WDT_OUT_PWROK; int units = margin; @@ -165,8 +156,7 @@ it8712f_wdt_update_margin(void) superio_outb(units, WDT_TIMEOUT); } -static int -it8712f_wdt_get_status(void) +static int it8712f_wdt_get_status(void) { if (superio_inb(WDT_CONTROL) & 0x01) return WDIOF_CARDRESET; @@ -174,8 +164,7 @@ it8712f_wdt_get_status(void) return 0; } -static void -it8712f_wdt_enable(void) +static void it8712f_wdt_enable(void) { printk(KERN_DEBUG NAME ": enabling watchdog timer\n"); superio_enter(); @@ -190,8 +179,7 @@ it8712f_wdt_enable(void) it8712f_wdt_ping(); } -static void -it8712f_wdt_disable(void) +static void it8712f_wdt_disable(void) { printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); @@ -207,8 +195,7 @@ it8712f_wdt_disable(void) superio_exit(); } -static int -it8712f_wdt_notify(struct notifier_block *this, +static int it8712f_wdt_notify(struct notifier_block *this, unsigned long code, void *unused) { if (code == SYS_HALT || code == SYS_POWER_OFF) @@ -222,9 +209,8 @@ static struct notifier_block it8712f_wdt_notifier = { .notifier_call = it8712f_wdt_notify, }; -static ssize_t -it8712f_wdt_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) +static ssize_t it8712f_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { /* check for a magic close character */ if (len) { @@ -245,9 +231,8 @@ it8712f_wdt_write(struct file *file, const char __user *data, return len; } -static int -it8712f_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -302,19 +287,16 @@ it8712f_wdt_ioctl(struct inode *inode, struct file *file, } } -static int -it8712f_wdt_open(struct inode *inode, struct file *file) +static int it8712f_wdt_open(struct inode *inode, struct file *file) { /* only allow one at a time */ - if (down_trylock(&it8712f_wdt_sem)) + if (test_and_set_bit(0, &wdt_open)) return -EBUSY; it8712f_wdt_enable(); - return nonseekable_open(inode, file); } -static int -it8712f_wdt_release(struct inode *inode, struct file *file) +static int it8712f_wdt_release(struct inode *inode, struct file *file) { if (expect_close != 42) { printk(KERN_WARNING NAME @@ -324,7 +306,7 @@ it8712f_wdt_release(struct inode *inode, struct file *file) it8712f_wdt_disable(); } expect_close = 0; - up(&it8712f_wdt_sem); + clear_bit(0, &wdt_open); return 0; } @@ -333,7 +315,7 @@ static const struct file_operations it8712f_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = it8712f_wdt_write, - .ioctl = it8712f_wdt_ioctl, + .unlocked_ioctl = it8712f_wdt_ioctl, .open = it8712f_wdt_open, .release = it8712f_wdt_release, }; @@ -344,8 +326,7 @@ static struct miscdevice it8712f_wdt_miscdev = { .fops = &it8712f_wdt_fops, }; -static int __init -it8712f_wdt_find(unsigned short *address) +static int __init it8712f_wdt_find(unsigned short *address) { int err = -ENODEV; int chip_type; @@ -387,8 +368,7 @@ exit: return err; } -static int __init -it8712f_wdt_init(void) +static int __init it8712f_wdt_init(void) { int err = 0; @@ -404,8 +384,6 @@ it8712f_wdt_init(void) it8712f_wdt_disable(); - sema_init(&it8712f_wdt_sem, 1); - err = register_reboot_notifier(&it8712f_wdt_notifier); if (err) { printk(KERN_ERR NAME ": unable to register reboot notifier\n"); @@ -430,8 +408,7 @@ out: return err; } -static void __exit -it8712f_wdt_exit(void) +static void __exit it8712f_wdt_exit(void) { misc_deregister(&it8712f_wdt_miscdev); unregister_reboot_notifier(&it8712f_wdt_notifier); -- GitLab From 0e6fa3fb38e2c89ba9abce9a8b74867f07d20d19 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:25 +0100 Subject: [PATCH 0024/1024] [WATCHDOG 18/57] iTCO: unlocked_ioctl, coding style and cleanup Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/iTCO_vendor.h | 15 ++ drivers/watchdog/iTCO_vendor_support.c | 53 +++-- drivers/watchdog/iTCO_wdt.c | 296 ++++++++++++------------- 3 files changed, 189 insertions(+), 175 deletions(-) create mode 100644 drivers/watchdog/iTCO_vendor.h diff --git a/drivers/watchdog/iTCO_vendor.h b/drivers/watchdog/iTCO_vendor.h new file mode 100644 index 00000000000..9e27e6422f6 --- /dev/null +++ b/drivers/watchdog/iTCO_vendor.h @@ -0,0 +1,15 @@ +/* iTCO Vendor Specific Support hooks */ +#ifdef CONFIG_ITCO_VENDOR_SUPPORT +extern void iTCO_vendor_pre_start(unsigned long, unsigned int); +extern void iTCO_vendor_pre_stop(unsigned long); +extern void iTCO_vendor_pre_keepalive(unsigned long, unsigned int); +extern void iTCO_vendor_pre_set_heartbeat(unsigned int); +extern int iTCO_vendor_check_noreboot_on(void); +#else +#define iTCO_vendor_pre_start(acpibase, heartbeat) {} +#define iTCO_vendor_pre_stop(acpibase) {} +#define iTCO_vendor_pre_keepalive(acpibase, heartbeat) {} +#define iTCO_vendor_pre_set_heartbeat(heartbeat) {} +#define iTCO_vendor_check_noreboot_on() 1 + /* 1=check noreboot; 0=don't check */ +#endif diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index cafc465f2ae..09e9534ac2e 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -32,7 +32,9 @@ #include /* For __init/__exit/... */ #include /* For io-port access */ -#include /* For inb/outb/... */ +#include /* For inb/outb/... */ + +#include "iTCO_vendor.h" /* iTCO defines */ #define SMI_EN acpibase + 0x30 /* SMI Control and Enable Register */ @@ -40,10 +42,12 @@ #define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ /* List of vendor support modes */ -#define SUPERMICRO_OLD_BOARD 1 /* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */ -#define SUPERMICRO_NEW_BOARD 2 /* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */ +/* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */ +#define SUPERMICRO_OLD_BOARD 1 +/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */ +#define SUPERMICRO_NEW_BOARD 2 -static int vendorsupport = 0; +static int vendorsupport; module_param(vendorsupport, int, 0); MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+"); @@ -143,34 +147,35 @@ static void supermicro_old_pre_keepalive(unsigned long acpibase) */ /* I/O Port's */ -#define SM_REGINDEX 0x2e /* SuperMicro ICH4+ Register Index */ -#define SM_DATAIO 0x2f /* SuperMicro ICH4+ Register Data I/O */ +#define SM_REGINDEX 0x2e /* SuperMicro ICH4+ Register Index */ +#define SM_DATAIO 0x2f /* SuperMicro ICH4+ Register Data I/O */ /* Control Register's */ -#define SM_CTLPAGESW 0x07 /* SuperMicro ICH4+ Control Page Switch */ -#define SM_CTLPAGE 0x08 /* SuperMicro ICH4+ Control Page Num */ +#define SM_CTLPAGESW 0x07 /* SuperMicro ICH4+ Control Page Switch */ +#define SM_CTLPAGE 0x08 /* SuperMicro ICH4+ Control Page Num */ -#define SM_WATCHENABLE 0x30 /* Watchdog enable: Bit 0: 0=off, 1=on */ +#define SM_WATCHENABLE 0x30 /* Watchdog enable: Bit 0: 0=off, 1=on */ -#define SM_WATCHPAGE 0x87 /* Watchdog unlock control page */ +#define SM_WATCHPAGE 0x87 /* Watchdog unlock control page */ -#define SM_ENDWATCH 0xAA /* Watchdog lock control page */ +#define SM_ENDWATCH 0xAA /* Watchdog lock control page */ -#define SM_COUNTMODE 0xf5 /* Watchdog count mode select */ - /* (Bit 3: 0 = seconds, 1 = minutes */ +#define SM_COUNTMODE 0xf5 /* Watchdog count mode select */ + /* (Bit 3: 0 = seconds, 1 = minutes */ -#define SM_WATCHTIMER 0xf6 /* 8-bits, Watchdog timer counter (RW) */ +#define SM_WATCHTIMER 0xf6 /* 8-bits, Watchdog timer counter (RW) */ -#define SM_RESETCONTROL 0xf7 /* Watchdog reset control */ - /* Bit 6: timer is reset by kbd interrupt */ - /* Bit 7: timer is reset by mouse interrupt */ +#define SM_RESETCONTROL 0xf7 /* Watchdog reset control */ + /* Bit 6: timer is reset by kbd interrupt */ + /* Bit 7: timer is reset by mouse interrupt */ static void supermicro_new_unlock_watchdog(void) { - outb(SM_WATCHPAGE, SM_REGINDEX); /* Write 0x87 to port 0x2e twice */ + /* Write 0x87 to port 0x2e twice */ outb(SM_WATCHPAGE, SM_REGINDEX); - - outb(SM_CTLPAGESW, SM_REGINDEX); /* Switch to watchdog control page */ + outb(SM_WATCHPAGE, SM_REGINDEX); + /* Switch to watchdog control page */ + outb(SM_CTLPAGESW, SM_REGINDEX); outb(SM_CTLPAGE, SM_DATAIO); } @@ -192,7 +197,7 @@ static void supermicro_new_pre_start(unsigned int heartbeat) outb(val, SM_DATAIO); /* Write heartbeat interval to WDOG */ - outb (SM_WATCHTIMER, SM_REGINDEX); + outb(SM_WATCHTIMER, SM_REGINDEX); outb((heartbeat & 255), SM_DATAIO); /* Make sure keyboard/mouse interrupts don't interfere */ @@ -277,7 +282,7 @@ EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat); int iTCO_vendor_check_noreboot_on(void) { - switch(vendorsupport) { + switch (vendorsupport) { case SUPERMICRO_OLD_BOARD: return 0; default: @@ -288,13 +293,13 @@ EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on); static int __init iTCO_vendor_init_module(void) { - printk (KERN_INFO PFX "vendor-support=%d\n", vendorsupport); + printk(KERN_INFO PFX "vendor-support=%d\n", vendorsupport); return 0; } static void __exit iTCO_vendor_exit_module(void) { - printk (KERN_INFO PFX "Module Unloaded\n"); + printk(KERN_INFO PFX "Module Unloaded\n"); } module_init(iTCO_vendor_init_module); diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index 95ba985bd34..c9ca8f691d8 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -66,7 +66,8 @@ #include /* For standard types (like size_t) */ #include /* For the -ENODEV/... values */ #include /* For printk/panic/... */ -#include /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */ +#include /* For MODULE_ALIAS_MISCDEV + (WATCHDOG_MINOR) */ #include /* For the watchdog specific items */ #include /* For __init/__exit/... */ #include /* For file operations */ @@ -74,9 +75,10 @@ #include /* For pci functions */ #include /* For io-port access */ #include /* For spin_lock/spin_unlock/... */ +#include /* For copy_to_user/put_user/... */ +#include /* For inb/outb/... */ -#include /* For copy_to_user/put_user/... */ -#include /* For inb/outb/... */ +#include "iTCO_vendor.h" /* TCO related info */ enum iTCO_chipsets { @@ -140,7 +142,7 @@ static struct { {"ICH9DH", 2}, {"ICH9DO", 2}, {"631xESB/632xESB", 2}, - {NULL,0} + {NULL, 0} }; #define ITCO_PCI_DEVICE(dev, data) \ @@ -159,32 +161,32 @@ static struct { * functions that probably will be registered by other drivers. */ static struct pci_device_id iTCO_wdt_pci_tbl[] = { - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AA_0, TCO_ICH )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AB_0, TCO_ICH0 )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_0, TCO_ICH2 )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_10, TCO_ICH2M )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_0, TCO_ICH3 )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_12, TCO_ICH3M )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_0, TCO_ICH4 )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_12, TCO_ICH4M )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801E_0, TCO_CICH )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801EB_0, TCO_ICH5 )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AA_0, TCO_ICH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AB_0, TCO_ICH0)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_0, TCO_ICH2)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_10, TCO_ICH2M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_0, TCO_ICH3)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_12, TCO_ICH3M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_0, TCO_ICH4)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_12, TCO_ICH4M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801E_0, TCO_CICH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801EB_0, TCO_ICH5)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB_1, TCO_6300ESB)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6 )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7 )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8 )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M )}, - { ITCO_PCI_DEVICE(0x2918, TCO_ICH9 )}, - { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH )}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)}, + { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)}, + { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)}, @@ -203,13 +205,15 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(0x267f, TCO_631XESB)}, { 0, }, /* End of list */ }; -MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl); +MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); /* Address definitions for the TCO */ -#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 /* TCO base address */ -#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 /* SMI Control and Enable Register */ +/* TCO base address */ +#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 +/* SMI Control and Enable Register */ +#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 -#define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Current Value */ +#define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Curr. Value */ #define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */ #define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */ #define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */ @@ -222,15 +226,21 @@ MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl); /* internal variables */ static unsigned long is_active; static char expect_release; -static struct { /* this is private data for the iTCO_wdt device */ - unsigned int iTCO_version; /* TCO version/generation */ - unsigned long ACPIBASE; /* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */ - unsigned long __iomem *gcs; /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2) */ - spinlock_t io_lock; /* the lock for io operations */ - struct pci_dev *pdev; /* the PCI-device */ +static struct { /* this is private data for the iTCO_wdt device */ + /* TCO version/generation */ + unsigned int iTCO_version; + /* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */ + unsigned long ACPIBASE; + /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2)*/ + unsigned long __iomem *gcs; + /* the lock for io operations */ + spinlock_t io_lock; + /* the PCI-device */ + struct pci_dev *pdev; } iTCO_wdt_private; -static struct platform_device *iTCO_wdt_platform_device; /* the watchdog platform device */ +/* the watchdog platform device */ +static struct platform_device *iTCO_wdt_platform_device; /* module parameters */ #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ @@ -240,22 +250,9 @@ MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2driver_data].iTCO_version; + iTCO_wdt_private.iTCO_version = + iTCO_chipset_info[ent->driver_data].iTCO_version; iTCO_wdt_private.ACPIBASE = base_address; iTCO_wdt_private.pdev = pdev; - /* Get the Memory-Mapped GCS register, we need it for the NO_REBOOT flag (TCO v2) */ - /* To get access to it you have to read RCBA from PCI Config space 0xf0 - and use it as base. GCS = RCBA + ICH6_GCS(0x3410). */ + /* Get the Memory-Mapped GCS register, we need it for the + NO_REBOOT flag (TCO v2). To get access to it you have to + read RCBA from PCI Config space 0xf0 and use it as base. + GCS = RCBA + ICH6_GCS(0x3410). */ if (iTCO_wdt_private.iTCO_version == 2) { pci_read_config_dword(pdev, 0xf0, &base_address); RCBA = base_address & 0xffffc000; - iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410),4); + iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410), 4); } /* Check chipset's NO_REBOOT bit */ @@ -657,8 +646,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device /* Set the TCO_EN bit in SMI_EN register */ if (!request_region(SMI_EN, 4, "iTCO_wdt")) { - printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", - SMI_EN ); + printk(KERN_ERR PFX + "I/O address 0x%04lx already in use\n", SMI_EN); ret = -EIO; goto out; } @@ -667,18 +656,20 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device outl(val32, SMI_EN); release_region(SMI_EN, 4); - /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */ - if (!request_region (TCOBASE, 0x20, "iTCO_wdt")) { - printk (KERN_ERR PFX "I/O address 0x%04lx already in use\n", + /* The TCO I/O registers reside in a 32-byte range pointed to + by the TCOBASE value */ + if (!request_region(TCOBASE, 0x20, "iTCO_wdt")) { + printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", TCOBASE); ret = -EIO; goto out; } - printk(KERN_INFO PFX "Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n", - iTCO_chipset_info[ent->driver_data].name, - iTCO_chipset_info[ent->driver_data].iTCO_version, - TCOBASE); + printk(KERN_INFO PFX + "Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n", + iTCO_chipset_info[ent->driver_data].name, + iTCO_chipset_info[ent->driver_data].iTCO_version, + TCOBASE); /* Clear out the (probably old) status */ outb(0, TCO1_STS); @@ -687,27 +678,29 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device /* Make sure the watchdog is not running */ iTCO_wdt_stop(); - /* Check that the heartbeat value is within it's range ; if not reset to the default */ + /* Check that the heartbeat value is within it's range; + if not reset to the default */ if (iTCO_wdt_set_heartbeat(heartbeat)) { iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT); - printk(KERN_INFO PFX "heartbeat value must be 2 Date: Mon, 19 May 2008 14:06:30 +0100 Subject: [PATCH 0025/1024] [WATCHDOG 19/57] bfin: watchdog cleanup and unlocked_ioctl Scan, tidy and check for unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/bfin_wdt.c | 147 +++++++++++++++++------------------- 1 file changed, 71 insertions(+), 76 deletions(-) diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index 03b3e3d91e7..2b92818cc66 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args) #define stampit() stamp("here i am") @@ -148,7 +148,8 @@ static int bfin_wdt_set_timeout(unsigned long t) int run = bfin_wdt_running(); bfin_wdt_stop(); bfin_write_WDOG_CNT(cnt); - if (run) bfin_wdt_start(); + if (run) + bfin_wdt_start(); } spin_unlock_irqrestore(&bfin_wdt_spinlock, flags); @@ -191,16 +192,15 @@ static int bfin_wdt_release(struct inode *inode, struct file *file) { stampit(); - if (expect_close == 42) { + if (expect_close == 42) bfin_wdt_stop(); - } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + else { + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); bfin_wdt_keepalive(); } - expect_close = 0; clear_bit(0, &open_check); - return 0; } @@ -214,7 +214,7 @@ static int bfin_wdt_release(struct inode *inode, struct file *file) * Pings the watchdog on write. */ static ssize_t bfin_wdt_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) + size_t len, loff_t *ppos) { stampit(); @@ -241,7 +241,6 @@ static ssize_t bfin_wdt_write(struct file *file, const char __user *data, /** * bfin_wdt_ioctl - Query Device - * @inode: inode of device * @file: file handle of device * @cmd: watchdog command * @arg: argument @@ -249,8 +248,8 @@ static ssize_t bfin_wdt_write(struct file *file, const char __user *data, * Query basic information from the device or ping it, as outlined by the * watchdog API. */ -static int bfin_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long bfin_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -258,59 +257,49 @@ static int bfin_wdt_ioctl(struct inode *inode, struct file *file, stampit(); switch (cmd) { - default: - return -ENOTTY; - - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &bfin_wdt_info, sizeof(bfin_wdt_info))) - return -EFAULT; - else - return 0; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(!!(_bfin_swrst & SWRST_RESET_WDOG), p); - - case WDIOC_KEEPALIVE: - bfin_wdt_keepalive(); + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &bfin_wdt_info, sizeof(bfin_wdt_info))) + return -EFAULT; + else return 0; - - case WDIOC_SETTIMEOUT: { - int new_timeout; - - if (get_user(new_timeout, p)) - return -EFAULT; - - if (bfin_wdt_set_timeout(new_timeout)) - return -EINVAL; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(!!(_bfin_swrst & SWRST_RESET_WDOG), p); + case WDIOC_KEEPALIVE: + bfin_wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: { + int new_timeout; + + if (get_user(new_timeout, p)) + return -EFAULT; + if (bfin_wdt_set_timeout(new_timeout)) + return -EINVAL; + } + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + case WDIOC_SETOPTIONS: { + unsigned long flags; + int options, ret = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + + spin_lock_irqsave(&bfin_wdt_spinlock, flags); + if (options & WDIOS_DISABLECARD) { + bfin_wdt_stop(); + ret = 0; } - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - - case WDIOC_SETOPTIONS: { - unsigned long flags; - int options, ret = -EINVAL; - - if (get_user(options, p)) - return -EFAULT; - - spin_lock_irqsave(&bfin_wdt_spinlock, flags); - - if (options & WDIOS_DISABLECARD) { - bfin_wdt_stop(); - ret = 0; - } - - if (options & WDIOS_ENABLECARD) { - bfin_wdt_start(); - ret = 0; - } - - spin_unlock_irqrestore(&bfin_wdt_spinlock, flags); - - return ret; + if (options & WDIOS_ENABLECARD) { + bfin_wdt_start(); + ret = 0; } + spin_unlock_irqrestore(&bfin_wdt_spinlock, flags); + return ret; + } + default: + return -ENOTTY; } } @@ -323,8 +312,8 @@ static int bfin_wdt_ioctl(struct inode *inode, struct file *file, * Handles specific events, such as turning off the watchdog during a * shutdown event. */ -static int bfin_wdt_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) +static int bfin_wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) { stampit(); @@ -379,12 +368,12 @@ static int bfin_wdt_resume(struct platform_device *pdev) #endif static const struct file_operations bfin_wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = bfin_wdt_write, - .ioctl = bfin_wdt_ioctl, - .open = bfin_wdt_open, - .release = bfin_wdt_release, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = bfin_wdt_write, + .unlocked_ioctl = bfin_wdt_ioctl, + .open = bfin_wdt_open, + .release = bfin_wdt_release, }; static struct miscdevice bfin_wdt_miscdev = { @@ -396,8 +385,8 @@ static struct miscdevice bfin_wdt_miscdev = { static struct watchdog_info bfin_wdt_info = { .identity = "Blackfin Watchdog", .options = WDIOF_SETTIMEOUT | - WDIOF_KEEPALIVEPING | - WDIOF_MAGICCLOSE, + WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, }; static struct notifier_block bfin_wdt_notifier = { @@ -416,14 +405,16 @@ static int __devinit bfin_wdt_probe(struct platform_device *pdev) ret = register_reboot_notifier(&bfin_wdt_notifier); if (ret) { - pr_devinit(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret); + pr_devinit(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", ret); return ret; } ret = misc_register(&bfin_wdt_miscdev); if (ret) { - pr_devinit(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + pr_devinit(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); unregister_reboot_notifier(&bfin_wdt_notifier); return ret; } @@ -516,7 +507,11 @@ MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); module_param(timeout, uint, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -- GitLab From 00e9c2059aba0a0d67d144229bac82d403c2f42a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:36 +0100 Subject: [PATCH 0026/1024] [WATCHDOG 20/57] booke watchdog: clean up and unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/booke_wdt.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index c1ba0db4850..4c423d531a8 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -18,9 +18,9 @@ #include #include #include +#include #include -#include #include /* If the kernel parameter wdt=1, the watchdog will be enabled at boot. @@ -32,7 +32,7 @@ */ #ifdef CONFIG_FSL_BOOKE -#define WDT_PERIOD_DEFAULT 63 /* Ex. wdt_period=28 bus=333Mhz , reset=~40sec */ +#define WDT_PERIOD_DEFAULT 63 /* Ex. wdt_period=28 bus=333Mhz,reset=~40sec */ #else #define WDT_PERIOD_DEFAULT 3 /* Refer to the PPC40x and PPC4xx manuals */ #endif /* for timing information */ @@ -82,16 +82,15 @@ static struct watchdog_info ident = { .identity = "PowerPC Book-E Watchdog", }; -static int booke_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long booke_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { u32 tmp = 0; u32 __user *p = (u32 __user *)arg; switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user((struct watchdog_info __user *)arg, &ident, - sizeof(struct watchdog_info))) + if (copy_to_user(arg, &ident, sizeof(struct watchdog_info))) return -EFAULT; case WDIOC_GETSTATUS: return put_user(ident.options, p); @@ -106,7 +105,8 @@ static int booke_wdt_ioctl(struct inode *inode, struct file *file, case WDIOC_SETTIMEOUT: if (get_user(booke_wdt_period, p)) return -EFAULT; - mtspr(SPRN_TCR, (mfspr(SPRN_TCR)&~WDTP(0))|WDTP(booke_wdt_period)); + mtspr(SPRN_TCR, (mfspr(SPRN_TCR) & ~WDTP(0)) | + WDTP(booke_wdt_period)); return 0; case WDIOC_GETTIMEOUT: return put_user(booke_wdt_period, p); @@ -132,8 +132,9 @@ static int booke_wdt_open(struct inode *inode, struct file *file) if (booke_wdt_enabled == 0) { booke_wdt_enabled = 1; on_each_cpu(__booke_wdt_enable, NULL, 0, 0); - printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled " - "(wdt_period=%d)\n", booke_wdt_period); + printk(KERN_INFO + "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n", + booke_wdt_period); } spin_unlock(&booke_wdt_lock); @@ -144,7 +145,7 @@ static const struct file_operations booke_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = booke_wdt_write, - .ioctl = booke_wdt_ioctl, + .unlocked_ioctl = booke_wdt_ioctl, .open = booke_wdt_open, }; @@ -175,8 +176,9 @@ static int __init booke_wdt_init(void) spin_lock(&booke_wdt_lock); if (booke_wdt_enabled == 1) { - printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled " - "(wdt_period=%d)\n", booke_wdt_period); + printk(KERN_INFO + "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n", + booke_wdt_period); on_each_cpu(__booke_wdt_enable, NULL, 0, 0); } spin_unlock(&booke_wdt_lock); -- GitLab From 640b4f685784feafcd99c24582c5eb3ea36c3c60 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:42 +0100 Subject: [PATCH 0027/1024] [WATCHDOG 21/57] ixp2000_wdt: clean up and unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ixp2000_wdt.c | 50 ++++++++++++++++------------------ 1 file changed, 23 insertions(+), 27 deletions(-) diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c index dc7548dcaf3..943ceffbd68 100644 --- a/drivers/watchdog/ixp2000_wdt.c +++ b/drivers/watchdog/ixp2000_wdt.c @@ -25,42 +25,45 @@ #include #include #include +#include #include -#include static int nowayout = WATCHDOG_NOWAYOUT; static unsigned int heartbeat = 60; /* (secs) Default is 1 minute */ static unsigned long wdt_status; +static spinlock_t wdt_lock; #define WDT_IN_USE 0 #define WDT_OK_TO_CLOSE 1 static unsigned long wdt_tick_rate; -static void -wdt_enable(void) +static void wdt_enable(void) { + spin_lock(&wdt_lock); ixp2000_reg_write(IXP2000_RESET0, *(IXP2000_RESET0) | WDT_RESET_ENABLE); ixp2000_reg_write(IXP2000_TWDE, WDT_ENABLE); ixp2000_reg_write(IXP2000_T4_CLD, heartbeat * wdt_tick_rate); ixp2000_reg_write(IXP2000_T4_CTL, TIMER_DIVIDER_256 | TIMER_ENABLE); + spin_unlock(&wdt_lock); } -static void -wdt_disable(void) +static void wdt_disable(void) { + spin_lock(&wdt_lock); ixp2000_reg_write(IXP2000_T4_CTL, 0); + spin_unlock(&wdt_lock); } -static void -wdt_keepalive(void) +static void wdt_keepalive(void) { + spin_lock(&wdt_lock); ixp2000_reg_write(IXP2000_T4_CLD, heartbeat * wdt_tick_rate); + spin_unlock(&wdt_lock); } -static int -ixp2000_wdt_open(struct inode *inode, struct file *file) +static int ixp2000_wdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(WDT_IN_USE, &wdt_status)) return -EBUSY; @@ -72,8 +75,8 @@ ixp2000_wdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static ssize_t -ixp2000_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) +static ssize_t ixp2000_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { if (len) { if (!nowayout) { @@ -103,9 +106,8 @@ static struct watchdog_info ident = { .identity = "IXP2000 Watchdog", }; -static int -ixp2000_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long ixp2000_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int ret = -ENOTTY; int time; @@ -151,16 +153,13 @@ ixp2000_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, return ret; } -static int -ixp2000_wdt_release(struct inode *inode, struct file *file) +static int ixp2000_wdt_release(struct inode *inode, struct file *file) { - if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) { + if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) wdt_disable(); - } else { + else printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - " "timer will not stop\n"); - } - clear_bit(WDT_IN_USE, &wdt_status); clear_bit(WDT_OK_TO_CLOSE, &wdt_status); @@ -168,18 +167,16 @@ ixp2000_wdt_release(struct inode *inode, struct file *file) } -static const struct file_operations ixp2000_wdt_fops = -{ +static const struct file_operations ixp2000_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = ixp2000_wdt_write, - .ioctl = ixp2000_wdt_ioctl, + .unlocked_ioctl = ixp2000_wdt_ioctl, .open = ixp2000_wdt_open, .release = ixp2000_wdt_release, }; -static struct miscdevice ixp2000_wdt_miscdev = -{ +static struct miscdevice ixp2000_wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &ixp2000_wdt_fops, @@ -191,9 +188,8 @@ static int __init ixp2000_wdt_init(void) printk(KERN_INFO "Unable to use IXP2000 watchdog due to IXP2800 erratum #25.\n"); return -EIO; } - wdt_tick_rate = (*IXP2000_T1_CLD * HZ) / 256; - + spin_lock_init(&wdt_lock); return misc_register(&ixp2000_wdt_miscdev); } -- GitLab From 20d35f3e50ea7e573f9568b9fce4e98523aaee5d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:48 +0100 Subject: [PATCH 0028/1024] [WATCHDOG 22/57] ixp4xx_wdt: unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ixp4xx_wdt.c | 41 +++++++++++++++-------------------- 1 file changed, 17 insertions(+), 24 deletions(-) diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c index 5864bb865cf..24e624c847a 100644 --- a/drivers/watchdog/ixp4xx_wdt.c +++ b/drivers/watchdog/ixp4xx_wdt.c @@ -30,40 +30,40 @@ static int nowayout = WATCHDOG_NOWAYOUT; static int heartbeat = 60; /* (secs) Default is 1 minute */ static unsigned long wdt_status; static unsigned long boot_status; +static spin_lock_t wdt_lock; #define WDT_TICK_RATE (IXP4XX_PERIPHERAL_BUS_CLOCK * 1000000UL) #define WDT_IN_USE 0 #define WDT_OK_TO_CLOSE 1 -static void -wdt_enable(void) +static void wdt_enable(void) { + spin_lock(&wdt_lock); *IXP4XX_OSWK = IXP4XX_WDT_KEY; *IXP4XX_OSWE = 0; *IXP4XX_OSWT = WDT_TICK_RATE * heartbeat; *IXP4XX_OSWE = IXP4XX_WDT_COUNT_ENABLE | IXP4XX_WDT_RESET_ENABLE; *IXP4XX_OSWK = 0; + spin_unlock(&wdt_lock); } -static void -wdt_disable(void) +static void wdt_disable(void) { + spin_lock(&wdt_lock); *IXP4XX_OSWK = IXP4XX_WDT_KEY; *IXP4XX_OSWE = 0; *IXP4XX_OSWK = 0; + spin_unlock(&wdt_lock); } -static int -ixp4xx_wdt_open(struct inode *inode, struct file *file) +static int ixp4xx_wdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(WDT_IN_USE, &wdt_status)) return -EBUSY; clear_bit(WDT_OK_TO_CLOSE, &wdt_status); - wdt_enable(); - return nonseekable_open(inode, file); } @@ -87,7 +87,6 @@ ixp4xx_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) } wdt_enable(); } - return len; } @@ -98,9 +97,8 @@ static struct watchdog_info ident = { }; -static int -ixp4xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long ixp4xx_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int ret = -ENOTTY; int time; @@ -145,16 +143,13 @@ ixp4xx_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, return ret; } -static int -ixp4xx_wdt_release(struct inode *inode, struct file *file) +static int ixp4xx_wdt_release(struct inode *inode, struct file *file) { - if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) { + if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) wdt_disable(); - } else { + else printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - " "timer will not stop\n"); - } - clear_bit(WDT_IN_USE, &wdt_status); clear_bit(WDT_OK_TO_CLOSE, &wdt_status); @@ -167,7 +162,7 @@ static const struct file_operations ixp4xx_wdt_fops = .owner = THIS_MODULE, .llseek = no_llseek, .write = ixp4xx_wdt_write, - .ioctl = ixp4xx_wdt_ioctl, + .unlocked_ioctl = ixp4xx_wdt_ioctl, .open = ixp4xx_wdt_open, .release = ixp4xx_wdt_release, }; @@ -191,14 +186,12 @@ static int __init ixp4xx_wdt_init(void) return -ENODEV; } - + spin_lock_init(&wdt_lock); + boot_status = (*IXP4XX_OSST & IXP4XX_OSST_TIMER_WARM_RESET) ? + WDIOF_CARDRESET : 0; ret = misc_register(&ixp4xx_wdt_miscdev); if (ret == 0) printk("IXP4xx Watchdog Timer: heartbeat %d sec\n", heartbeat); - - boot_status = (*IXP4XX_OSST & IXP4XX_OSST_TIMER_WARM_RESET) ? - WDIOF_CARDRESET : 0; - return ret; } -- GitLab From f4fabce15bb9b547f934e2b6f0e5e01044108e4d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:53 +0100 Subject: [PATCH 0029/1024] [WATCHDOG 23/57] ks8695_wdt: clean up, coding style, unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ks8695_wdt.c | 119 ++++++++++++++++++---------------- 1 file changed, 62 insertions(+), 57 deletions(-) diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c index df5a6b811cc..6d052b80aa2 100644 --- a/drivers/watchdog/ks8695_wdt.c +++ b/drivers/watchdog/ks8695_wdt.c @@ -19,8 +19,8 @@ #include #include #include -#include -#include +#include +#include #include @@ -31,38 +31,44 @@ static int wdt_time = WDT_DEFAULT_TIME; static int nowayout = WATCHDOG_NOWAYOUT; module_param(wdt_time, int, 0); -MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="__MODULE_STRING(WDT_DEFAULT_TIME) ")"); +MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" + __MODULE_STRING(WDT_DEFAULT_TIME) ")"); #ifdef CONFIG_WATCHDOG_NOWAYOUT module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); #endif static unsigned long ks8695wdt_busy; +static spinlock_t ks8695_lock; /* ......................................................................... */ /* * Disable the watchdog. */ -static void inline ks8695_wdt_stop(void) +static inline void ks8695_wdt_stop(void) { unsigned long tmcon; + spin_lock(&ks8695_lock); /* disable timer0 */ tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + spin_unlock(&ks8695_lock); } /* * Enable and reset the watchdog. */ -static void inline ks8695_wdt_start(void) +static inline void ks8695_wdt_start(void) { unsigned long tmcon; unsigned long tval = wdt_time * CLOCK_TICK_RATE; + spin_lock(&ks8695_lock); /* disable timer0 */ tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); @@ -73,19 +79,22 @@ static void inline ks8695_wdt_start(void) /* re-enable timer0 */ tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); __raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + spin_unlock(&ks8695_lock); } /* * Reload the watchdog timer. (ie, pat the watchdog) */ -static void inline ks8695_wdt_reload(void) +static inline void ks8695_wdt_reload(void) { unsigned long tmcon; + spin_lock(&ks8695_lock); /* disable, then re-enable timer0 */ tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); __raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); + spin_unlock(&ks8695_lock); } /* @@ -102,7 +111,8 @@ static int ks8695_wdt_settimeout(int new_time) if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) return -EINVAL; - /* Set new watchdog time. It will be used when ks8695_wdt_start() is called. */ + /* Set new watchdog time. It will be used when + ks8695_wdt_start() is called. */ wdt_time = new_time; return 0; } @@ -128,9 +138,9 @@ static int ks8695_wdt_open(struct inode *inode, struct file *file) */ static int ks8695_wdt_close(struct inode *inode, struct file *file) { + /* Disable the watchdog when file is closed */ if (!nowayout) - ks8695_wdt_stop(); /* Disable the watchdog when file is closed */ - + ks8695_wdt_stop(); clear_bit(0, &ks8695wdt_busy); return 0; } @@ -143,60 +153,52 @@ static struct watchdog_info ks8695_wdt_info = { /* * Handle commands from user-space. */ -static int ks8695_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ks8695_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; int new_value; - switch(cmd) { - case WDIOC_KEEPALIVE: - ks8695_wdt_reload(); /* pat the watchdog */ - return 0; - - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ks8695_wdt_info, sizeof(ks8695_wdt_info)) ? -EFAULT : 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_value, p)) - return -EFAULT; - - if (ks8695_wdt_settimeout(new_value)) - return -EINVAL; - - /* Enable new time value */ + switch (cmd) { + case WDIOC_KEEPALIVE: + ks8695_wdt_reload(); /* pat the watchdog */ + return 0; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ks8695_wdt_info, + sizeof(ks8695_wdt_info)) ? -EFAULT : 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + if (ks8695_wdt_settimeout(new_value)) + return -EINVAL; + /* Enable new time value */ + ks8695_wdt_start(); + /* Return current value */ + return put_user(wdt_time, p); + case WDIOC_GETTIMEOUT: + return put_user(wdt_time, p); + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_SETOPTIONS: + if (get_user(new_value, p)) + return -EFAULT; + if (new_value & WDIOS_DISABLECARD) + ks8695_wdt_stop(); + if (new_value & WDIOS_ENABLECARD) ks8695_wdt_start(); - - /* Return current value */ - return put_user(wdt_time, p); - - case WDIOC_GETTIMEOUT: - return put_user(wdt_time, p); - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_SETOPTIONS: - if (get_user(new_value, p)) - return -EFAULT; - - if (new_value & WDIOS_DISABLECARD) - ks8695_wdt_stop(); - if (new_value & WDIOS_ENABLECARD) - ks8695_wdt_start(); - return 0; - - default: - return -ENOTTY; + return 0; + default: + return -ENOTTY; } } /* * Pat the watchdog whenever device is written to. */ -static ssize_t ks8695_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) +static ssize_t ks8695_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { ks8695_wdt_reload(); /* pat the watchdog */ return len; @@ -207,7 +209,7 @@ static ssize_t ks8695_wdt_write(struct file *file, const char *data, size_t len, static const struct file_operations ks8695wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = ks8695_wdt_ioctl, + .unlocked_ioctl = ks8695_wdt_ioctl, .open = ks8695_wdt_open, .release = ks8695_wdt_close, .write = ks8695_wdt_write, @@ -231,7 +233,8 @@ static int __init ks8695wdt_probe(struct platform_device *pdev) if (res) return res; - printk("KS8695 Watchdog Timer enabled (%d seconds%s)\n", wdt_time, nowayout ? ", nowayout" : ""); + printk(KERN_INFO "KS8695 Watchdog Timer enabled (%d seconds%s)\n", + wdt_time, nowayout ? ", nowayout" : ""); return 0; } @@ -285,12 +288,14 @@ static struct platform_driver ks8695wdt_driver = { static int __init ks8695_wdt_init(void) { - /* Check that the heartbeat value is within range; if not reset to the default */ + spin_lock_init(&ks8695_lock); + /* Check that the heartbeat value is within range; + if not reset to the default */ if (ks8695_wdt_settimeout(wdt_time)) { ks8695_wdt_settimeout(WDT_DEFAULT_TIME); - pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i, using %d\n", wdt_time, WDT_MAX_TIME); + pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i, using %d\n", + wdt_time, WDT_MAX_TIME); } - return platform_driver_register(&ks8695wdt_driver); } -- GitLab From 325ea4d3a8a90b19d7a076714d0f8f238a5a6a69 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:06:59 +0100 Subject: [PATCH 0030/1024] [WATCHDOG 24/57] machzwd: clean up, coding style, unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/machzwd.c | 108 ++++++++++++++----------------------- 1 file changed, 40 insertions(+), 68 deletions(-) diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c index 6905135a776..2dfc27559bf 100644 --- a/drivers/watchdog/machzwd.c +++ b/drivers/watchdog/machzwd.c @@ -40,9 +40,9 @@ #include #include #include +#include +#include -#include -#include #include /* ports */ @@ -95,7 +95,9 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); #define PFX "machzwd" @@ -114,7 +116,7 @@ static struct watchdog_info zf_info = { * 3 = GEN_SCI * defaults to GEN_RESET (0) */ -static int action = 0; +static int action; module_param(action, int, 0); MODULE_PARM_DESC(action, "after watchdog resets, generate: 0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI"); @@ -123,10 +125,9 @@ static void zf_ping(unsigned long data); static int zf_action = GEN_RESET; static unsigned long zf_is_open; static char zf_expect_close; -static DEFINE_SPINLOCK(zf_lock); static DEFINE_SPINLOCK(zf_port_lock); static DEFINE_TIMER(zf_timer, zf_ping, 0, 0); -static unsigned long next_heartbeat = 0; +static unsigned long next_heartbeat; /* timeout for user land heart beat (10 seconds) */ @@ -171,13 +172,13 @@ static inline void zf_set_control(unsigned short new) static inline void zf_set_timer(unsigned short new, unsigned char n) { - switch(n){ - case WD1: - zf_writew(COUNTER_1, new); - case WD2: - zf_writeb(COUNTER_2, new > 0xff ? 0xff : new); - default: - return; + switch (n) { + case WD1: + zf_writew(COUNTER_1, new); + case WD2: + zf_writeb(COUNTER_2, new > 0xff ? 0xff : new); + default: + return; } } @@ -241,10 +242,8 @@ static void zf_ping(unsigned long data) zf_writeb(COUNTER_2, 0xff); - if(time_before(jiffies, next_heartbeat)){ - + if (time_before(jiffies, next_heartbeat)) { dprintk("time_before: %ld\n", next_heartbeat - jiffies); - /* * reset event is activated by transition from 0 to 1 on * RESET_WD1 bit and we assume that it is already zero... @@ -261,24 +260,21 @@ static void zf_ping(unsigned long data) spin_unlock_irqrestore(&zf_port_lock, flags); mod_timer(&zf_timer, jiffies + ZF_HW_TIMEO); - }else{ + } else printk(KERN_CRIT PFX ": I will reset your machine\n"); - } } static ssize_t zf_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { /* See if we got the magic character */ - if(count){ - + if (count) { /* * no need to check for close confirmation * no way to disable watchdog ;) */ if (!nowayout) { size_t ofs; - /* * note: just in case someone wrote the magic character * five months ago... @@ -286,11 +282,11 @@ static ssize_t zf_write(struct file *file, const char __user *buf, size_t count, zf_expect_close = 0; /* now scan */ - for (ofs = 0; ofs != count; ofs++){ + for (ofs = 0; ofs != count; ofs++) { char c; if (get_user(c, buf + ofs)) return -EFAULT; - if (c == 'V'){ + if (c == 'V') { zf_expect_close = 42; dprintk("zf_expect_close = 42\n"); } @@ -303,14 +299,11 @@ static ssize_t zf_write(struct file *file, const char __user *buf, size_t count, */ next_heartbeat = jiffies + ZF_USER_TIMEO; dprintk("user ping at %ld\n", jiffies); - } - return count; } -static int zf_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long zf_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -319,55 +312,38 @@ static int zf_ioctl(struct inode *inode, struct file *file, unsigned int cmd, if (copy_to_user(argp, &zf_info, sizeof(zf_info))) return -EFAULT; break; - case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: zf_ping(0); break; - default: return -ENOTTY; } - return 0; } static int zf_open(struct inode *inode, struct file *file) { - spin_lock(&zf_lock); - if(test_and_set_bit(0, &zf_is_open)) { - spin_unlock(&zf_lock); + if (test_and_set_bit(0, &zf_is_open)) return -EBUSY; - } - if (nowayout) __module_get(THIS_MODULE); - - spin_unlock(&zf_lock); - zf_timer_on(); - return nonseekable_open(inode, file); } static int zf_close(struct inode *inode, struct file *file) { - if(zf_expect_close == 42){ + if (zf_expect_close == 42) zf_timer_off(); - } else { + else { del_timer(&zf_timer); printk(KERN_ERR PFX ": device file closed unexpectedly. Will not stop the WDT!\n"); } - - spin_lock(&zf_lock); clear_bit(0, &zf_is_open); - spin_unlock(&zf_lock); - zf_expect_close = 0; - return 0; } @@ -378,23 +354,18 @@ static int zf_close(struct inode *inode, struct file *file) static int zf_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if(code == SYS_DOWN || code == SYS_HALT){ + if (code == SYS_DOWN || code == SYS_HALT) zf_timer_off(); - } - return NOTIFY_DONE; } - - - static const struct file_operations zf_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = zf_write, - .ioctl = zf_ioctl, - .open = zf_open, - .release = zf_close, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = zf_write, + .unlocked_ioctl = zf_ioctl, + .open = zf_open, + .release = zf_close, }; static struct miscdevice zf_miscdev = { @@ -402,7 +373,7 @@ static struct miscdevice zf_miscdev = { .name = "watchdog", .fops = &zf_fops, }; - + /* * The device needs to learn about soft shutdowns in order to @@ -423,22 +394,23 @@ static int __init zf_init(void) { int ret; - printk(KERN_INFO PFX ": MachZ ZF-Logic Watchdog driver initializing.\n"); + printk(KERN_INFO PFX + ": MachZ ZF-Logic Watchdog driver initializing.\n"); ret = zf_get_ZFL_version(); - if ((!ret) || (ret == 0xffff)) { + if (!ret || ret == 0xffff) { printk(KERN_WARNING PFX ": no ZF-Logic found\n"); return -ENODEV; } - if((action <= 3) && (action >= 0)){ - zf_action = zf_action>>action; - } else + if (action <= 3 && action >= 0) + zf_action = zf_action >> action; + else action = 0; zf_show_action(action); - if(!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")){ + if (!request_region(ZF_IOBASE, 3, "MachZ ZFL WDT")) { printk(KERN_ERR "cannot reserve I/O ports at %d\n", ZF_IOBASE); ret = -EBUSY; @@ -446,14 +418,14 @@ static int __init zf_init(void) } ret = register_reboot_notifier(&zf_notifier); - if(ret){ + if (ret) { printk(KERN_ERR "can't register reboot notifier (err=%d)\n", ret); goto no_reboot; } ret = misc_register(&zf_miscdev); - if (ret){ + if (ret) { printk(KERN_ERR "can't misc_register on minor=%d\n", WATCHDOG_MINOR); goto no_misc; -- GitLab From 3930964532f8e454910cbe0d9909e98a02d9f552 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:04 +0100 Subject: [PATCH 0031/1024] [WATCHDOG 25/57] mixcomwd: coding style locking, unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/mixcomwd.c | 133 +++++++++++++++++------------------- 1 file changed, 63 insertions(+), 70 deletions(-) diff --git a/drivers/watchdog/mixcomwd.c b/drivers/watchdog/mixcomwd.c index 1adf1d56027..2248a818759 100644 --- a/drivers/watchdog/mixcomwd.c +++ b/drivers/watchdog/mixcomwd.c @@ -29,7 +29,8 @@ * - support for one more type board * * Version 0.5 (2001/12/14) Matt Domsch - * - added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * - added nowayout module option to override + * CONFIG_WATCHDOG_NOWAYOUT * * Version 0.6 (2002/04/12): Rob Radez * - make mixcomwd_opened unsigned, @@ -53,8 +54,8 @@ #include #include #include -#include -#include +#include +#include /* * We have two types of cards that can be probed: @@ -108,18 +109,19 @@ static char expect_close; static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static void mixcomwd_ping(void) { - outb_p(55,watchdog_port); + outb_p(55, watchdog_port); return; } static void mixcomwd_timerfun(unsigned long d) { mixcomwd_ping(); - mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); } @@ -129,22 +131,22 @@ static void mixcomwd_timerfun(unsigned long d) static int mixcomwd_open(struct inode *inode, struct file *file) { - if(test_and_set_bit(0,&mixcomwd_opened)) { + if (test_and_set_bit(0, &mixcomwd_opened)) return -EBUSY; - } + mixcomwd_ping(); - if (nowayout) { + if (nowayout) /* * fops_get() code via open() has already done * a try_module_get() so it is safe to do the * __module_get(). */ __module_get(THIS_MODULE); - } else { - if(mixcomwd_timer_alive) { + else { + if (mixcomwd_timer_alive) { del_timer(&mixcomwd_timer); - mixcomwd_timer_alive=0; + mixcomwd_timer_alive = 0; } } return nonseekable_open(inode, file); @@ -153,26 +155,27 @@ static int mixcomwd_open(struct inode *inode, struct file *file) static int mixcomwd_release(struct inode *inode, struct file *file) { if (expect_close == 42) { - if(mixcomwd_timer_alive) { - printk(KERN_ERR PFX "release called while internal timer alive"); + if (mixcomwd_timer_alive) { + printk(KERN_ERR PFX + "release called while internal timer alive"); return -EBUSY; } - mixcomwd_timer_alive=1; + mixcomwd_timer_alive = 1; mod_timer(&mixcomwd_timer, jiffies + 5 * HZ); - } else { - printk(KERN_CRIT PFX "WDT device closed unexpectedly. WDT will not stop!\n"); - } + } else + printk(KERN_CRIT PFX + "WDT device closed unexpectedly. WDT will not stop!\n"); - clear_bit(0,&mixcomwd_opened); - expect_close=0; + clear_bit(0, &mixcomwd_opened); + expect_close = 0; return 0; } -static ssize_t mixcomwd_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) +static ssize_t mixcomwd_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { - if(len) - { + if (len) { if (!nowayout) { size_t i; @@ -192,8 +195,8 @@ static ssize_t mixcomwd_write(struct file *file, const char __user *data, size_t return len; } -static int mixcomwd_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long mixcomwd_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -204,32 +207,23 @@ static int mixcomwd_ioctl(struct inode *inode, struct file *file, .identity = "MixCOM watchdog", }; - switch(cmd) - { - case WDIOC_GETSTATUS: - status=mixcomwd_opened; - if (!nowayout) { - status|=mixcomwd_timer_alive; - } - if (copy_to_user(p, &status, sizeof(int))) { - return -EFAULT; - } - break; - case WDIOC_GETBOOTSTATUS: - if (copy_to_user(p, &status, sizeof(int))) { - return -EFAULT; - } - break; - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) { - return -EFAULT; - } - break; - case WDIOC_KEEPALIVE: - mixcomwd_ping(); - break; - default: - return -ENOTTY; + switch (cmd) { + case WDIOC_GETSTATUS: + status = mixcomwd_opened; + if (!nowayout) + status |= mixcomwd_timer_alive; + return put_user(status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + case WDIOC_KEEPALIVE: + mixcomwd_ping(); + break; + default: + return -ENOTTY; } return 0; } @@ -238,7 +232,7 @@ static const struct file_operations mixcomwd_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = mixcomwd_write, - .ioctl = mixcomwd_ioctl, + .unlocked_ioctl = mixcomwd_ioctl, .open = mixcomwd_open, .release = mixcomwd_release, }; @@ -253,15 +247,14 @@ static int __init checkcard(int port, int card_id) { int id; - if (!request_region(port, 1, "MixCOM watchdog")) { + if (!request_region(port, 1, "MixCOM watchdog")) return 0; - } - id=inb_p(port); - if (card_id==MIXCOM_ID) + id = inb_p(port); + if (card_id == MIXCOM_ID) id &= 0x3f; - if (id!=card_id) { + if (id != card_id) { release_region(port, 1); return 0; } @@ -270,9 +263,7 @@ static int __init checkcard(int port, int card_id) static int __init mixcomwd_init(void) { - int i; - int ret; - int found=0; + int i, ret, found = 0; for (i = 0; !found && mixcomwd_io_info[i].ioport != 0; i++) { if (checkcard(mixcomwd_io_info[i].ioport, @@ -283,20 +274,22 @@ static int __init mixcomwd_init(void) } if (!found) { - printk(KERN_ERR PFX "No card detected, or port not available.\n"); + printk(KERN_ERR PFX + "No card detected, or port not available.\n"); return -ENODEV; } ret = misc_register(&mixcomwd_miscdev); - if (ret) - { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + if (ret) { + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto error_misc_register_watchdog; } - printk(KERN_INFO "MixCOM watchdog driver v%s, watchdog port at 0x%3x\n", - VERSION, watchdog_port); + printk(KERN_INFO + "MixCOM watchdog driver v%s, watchdog port at 0x%3x\n", + VERSION, watchdog_port); return 0; @@ -309,15 +302,15 @@ error_misc_register_watchdog: static void __exit mixcomwd_exit(void) { if (!nowayout) { - if(mixcomwd_timer_alive) { + if (mixcomwd_timer_alive) { printk(KERN_WARNING PFX "I quit now, hardware will" " probably reboot!\n"); del_timer_sync(&mixcomwd_timer); - mixcomwd_timer_alive=0; + mixcomwd_timer_alive = 0; } } misc_deregister(&mixcomwd_miscdev); - release_region(watchdog_port,1); + release_region(watchdog_port, 1); } module_init(mixcomwd_init); -- GitLab From f26ef3dc69467e135e2b9555e44a088aee5c7d8f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:09 +0100 Subject: [PATCH 0032/1024] [WATCHDOG 26/57] mpc watchdog: clean up and locking Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/mpc5200_wdt.c | 20 ++++++++++-------- drivers/watchdog/mpc83xx_wdt.c | 19 ++++++++--------- drivers/watchdog/mpc8xx_wdt.c | 37 +++++++++++++++++----------------- 3 files changed, 41 insertions(+), 35 deletions(-) diff --git a/drivers/watchdog/mpc5200_wdt.c b/drivers/watchdog/mpc5200_wdt.c index 80a91d4cea1..ce1811d5d6b 100644 --- a/drivers/watchdog/mpc5200_wdt.c +++ b/drivers/watchdog/mpc5200_wdt.c @@ -4,8 +4,8 @@ #include #include #include -#include -#include +#include +#include #include @@ -57,7 +57,8 @@ static int mpc5200_wdt_start(struct mpc5200_wdt *wdt) /* set timeout, with maximum prescaler */ out_be32(&wdt->regs->count, 0x0 | wdt->count); /* enable watchdog */ - out_be32(&wdt->regs->mode, GPT_MODE_CE | GPT_MODE_WDT | GPT_MODE_MS_TIMER); + out_be32(&wdt->regs->mode, GPT_MODE_CE | GPT_MODE_WDT | + GPT_MODE_MS_TIMER); spin_unlock(&wdt->io_lock); return 0; @@ -66,7 +67,8 @@ static int mpc5200_wdt_ping(struct mpc5200_wdt *wdt) { spin_lock(&wdt->io_lock); /* writing A5 to OCPW resets the watchdog */ - out_be32(&wdt->regs->mode, 0xA5000000 | (0xffffff & in_be32(&wdt->regs->mode))); + out_be32(&wdt->regs->mode, 0xA5000000 | + (0xffffff & in_be32(&wdt->regs->mode))); spin_unlock(&wdt->io_lock); return 0; } @@ -92,8 +94,8 @@ static struct watchdog_info mpc5200_wdt_info = { .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, .identity = "mpc5200 watchdog on GPT0", }; -static int mpc5200_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long mpc5200_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { struct mpc5200_wdt *wdt = file->private_data; int __user *data = (int __user *)arg; @@ -103,7 +105,7 @@ static int mpc5200_wdt_ioctl(struct inode *inode, struct file *file, switch (cmd) { case WDIOC_GETSUPPORT: ret = copy_to_user(data, &mpc5200_wdt_info, - sizeof(mpc5200_wdt_info)); + sizeof(mpc5200_wdt_info)); if (ret) ret = -EFAULT; break; @@ -135,6 +137,7 @@ static int mpc5200_wdt_ioctl(struct inode *inode, struct file *file, } return ret; } + static int mpc5200_wdt_open(struct inode *inode, struct file *file) { /* /dev/watchdog can only be opened once */ @@ -167,7 +170,8 @@ static const struct file_operations mpc5200_wdt_fops = { }; /* module operations */ -static int mpc5200_wdt_probe(struct of_device *op, const struct of_device_id *match) +static int mpc5200_wdt_probe(struct of_device *op, + const struct of_device_id *match) { struct mpc5200_wdt *wdt; int err; diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c index b16c5cd972e..109eea0df2d 100644 --- a/drivers/watchdog/mpc83xx_wdt.c +++ b/drivers/watchdog/mpc83xx_wdt.c @@ -22,8 +22,8 @@ #include #include #include -#include -#include +#include +#include struct mpc83xx_wdt { __be32 res0; @@ -42,11 +42,13 @@ static struct mpc83xx_wdt __iomem *wd_base; static u16 timeout = 0xffff; module_param(timeout, ushort, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in ticks. (0start, sizeof (struct mpc83xx_wdt)); - + wd_base = ioremap(r->start, sizeof(struct mpc83xx_wdt)); if (wd_base == NULL) { ret = -ENOMEM; goto err_out; diff --git a/drivers/watchdog/mpc8xx_wdt.c b/drivers/watchdog/mpc8xx_wdt.c index 85b5734403a..1336425acf2 100644 --- a/drivers/watchdog/mpc8xx_wdt.c +++ b/drivers/watchdog/mpc8xx_wdt.c @@ -16,36 +16,35 @@ #include #include #include -#include -#include +#include +#include #include static unsigned long wdt_opened; static int wdt_status; +static spinlock_t wdt_lock; static void mpc8xx_wdt_handler_disable(void) { volatile uint __iomem *piscr; - piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr; + piscr = (uint *)&((immap_t *)IMAP_ADDR)->im_sit.sit_piscr; if (!m8xx_has_internal_rtc) m8xx_wdt_stop_timer(); else out_be32(piscr, in_be32(piscr) & ~(PISCR_PIE | PISCR_PTE)); - printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler deactivated\n"); } static void mpc8xx_wdt_handler_enable(void) { volatile uint __iomem *piscr; - piscr = (uint *)&((immap_t*)IMAP_ADDR)->im_sit.sit_piscr; + piscr = (uint *)&((immap_t *)IMAP_ADDR)->im_sit.sit_piscr; if (!m8xx_has_internal_rtc) m8xx_wdt_install_timer(); else out_be32(piscr, in_be32(piscr) | PISCR_PIE | PISCR_PTE); - printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler activated\n"); } @@ -53,37 +52,34 @@ static int mpc8xx_wdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(0, &wdt_opened)) return -EBUSY; - m8xx_wdt_reset(); mpc8xx_wdt_handler_disable(); - return nonseekable_open(inode, file); } static int mpc8xx_wdt_release(struct inode *inode, struct file *file) { m8xx_wdt_reset(); - #if !defined(CONFIG_WATCHDOG_NOWAYOUT) mpc8xx_wdt_handler_enable(); #endif - clear_bit(0, &wdt_opened); - return 0; } -static ssize_t mpc8xx_wdt_write(struct file *file, const char *data, size_t len, - loff_t * ppos) +static ssize_t mpc8xx_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { - if (len) + if (len) { + spin_lock(&wdt_lock); m8xx_wdt_reset(); - + spin_unlock(&wdt_lock); + } return len; } -static int mpc8xx_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long mpc8xx_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { int timeout; static struct watchdog_info info = { @@ -112,15 +108,19 @@ static int mpc8xx_wdt_ioctl(struct inode *inode, struct file *file, return -EOPNOTSUPP; case WDIOC_KEEPALIVE: + spin_lock(&wdt_lock); m8xx_wdt_reset(); wdt_status |= WDIOF_KEEPALIVEPING; + spin_unlock(&wdt_lock); break; case WDIOC_SETTIMEOUT: return -EOPNOTSUPP; case WDIOC_GETTIMEOUT: + spin_lock(&wdt_lock); timeout = m8xx_wdt_get_timeout(); + spin_unlock(&wdt_lock); if (put_user(timeout, (int *)arg)) return -EFAULT; break; @@ -136,7 +136,7 @@ static const struct file_operations mpc8xx_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = mpc8xx_wdt_write, - .ioctl = mpc8xx_wdt_ioctl, + .unlocked_ioctl = mpc8xx_wdt_ioctl, .open = mpc8xx_wdt_open, .release = mpc8xx_wdt_release, }; @@ -149,6 +149,7 @@ static struct miscdevice mpc8xx_wdt_miscdev = { static int __init mpc8xx_wdt_init(void) { + spin_lock_init(&wdt_lock); return misc_register(&mpc8xx_wdt_miscdev); } -- GitLab From 83ab1a53f219c8139199633f60ab0ef88ef18c54 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:15 +0100 Subject: [PATCH 0033/1024] [WATCHDOG 27/57] mpcore watchdog: unlocked_ioctl and BKl work Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/mpcore_wdt.c | 53 +++++++++++++++++++++-------------- 1 file changed, 32 insertions(+), 21 deletions(-) diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c index 009573b8149..5e58f8b73d0 100644 --- a/drivers/watchdog/mpcore_wdt.c +++ b/drivers/watchdog/mpcore_wdt.c @@ -29,9 +29,9 @@ #include #include #include +#include #include -#include struct mpcore_wdt { unsigned long timer_alive; @@ -43,17 +43,20 @@ struct mpcore_wdt { }; static struct platform_device *mpcore_wdt_dev; - extern unsigned int mpcore_timer_rate; #define TIMER_MARGIN 60 static int mpcore_margin = TIMER_MARGIN; module_param(mpcore_margin, int, 0); -MODULE_PARM_DESC(mpcore_margin, "MPcore timer margin in seconds. (0base + TWD_WDOG_INTSTAT)) { - dev_printk(KERN_CRIT, wdt->dev, "Triggered - Reboot ignored.\n"); - + dev_printk(KERN_CRIT, wdt->dev, + "Triggered - Reboot ignored.\n"); /* Clear the interrupt on the watchdog */ writel(1, wdt->base + TWD_WDOG_INTSTAT); - return IRQ_HANDLED; } - return IRQ_NONE; } @@ -96,22 +97,26 @@ static void mpcore_wdt_keepalive(struct mpcore_wdt *wdt) count = (mpcore_timer_rate / 256) * mpcore_margin; /* Reload the counter */ + spin_lock(&wdt_lock); writel(count + wdt->perturb, wdt->base + TWD_WDOG_LOAD); - wdt->perturb = wdt->perturb ? 0 : 1; + spin_unlock(&wdt_lock); } static void mpcore_wdt_stop(struct mpcore_wdt *wdt) { + spin_lock(&wdt_lock); writel(0x12345678, wdt->base + TWD_WDOG_DISABLE); writel(0x87654321, wdt->base + TWD_WDOG_DISABLE); writel(0x0, wdt->base + TWD_WDOG_CONTROL); + spin_unlock(&wdt_lock); } static void mpcore_wdt_start(struct mpcore_wdt *wdt) { dev_printk(KERN_INFO, wdt->dev, "enabling watchdog.\n"); + spin_lock(&wdt_lock); /* This loads the count register but does NOT start the count yet */ mpcore_wdt_keepalive(wdt); @@ -122,6 +127,7 @@ static void mpcore_wdt_start(struct mpcore_wdt *wdt) /* Enable watchdog - prescale=256, watchdog mode=1, enable=1 */ writel(0x0000FF09, wdt->base + TWD_WDOG_CONTROL); } + spin_unlock(&wdt_lock); } static int mpcore_wdt_set_heartbeat(int t) @@ -164,10 +170,11 @@ static int mpcore_wdt_release(struct inode *inode, struct file *file) * Shut off the timer. * Lock it in if it's a module and we set nowayout */ - if (wdt->expect_close == 42) { + if (wdt->expect_close == 42) mpcore_wdt_stop(wdt); - } else { - dev_printk(KERN_CRIT, wdt->dev, "unexpected close, not stopping watchdog!\n"); + else { + dev_printk(KERN_CRIT, wdt->dev, + "unexpected close, not stopping watchdog!\n"); mpcore_wdt_keepalive(wdt); } clear_bit(0, &wdt->timer_alive); @@ -175,7 +182,8 @@ static int mpcore_wdt_release(struct inode *inode, struct file *file) return 0; } -static ssize_t mpcore_wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) +static ssize_t mpcore_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { struct mpcore_wdt *wdt = file->private_data; @@ -210,8 +218,8 @@ static struct watchdog_info ident = { .identity = "MPcore Watchdog", }; -static int mpcore_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long mpcore_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { struct mpcore_wdt *wdt = file->private_data; int ret; @@ -301,7 +309,7 @@ static const struct file_operations mpcore_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = mpcore_wdt_write, - .ioctl = mpcore_wdt_ioctl, + .unlocked_ioctl = mpcore_wdt_ioctl, .open = mpcore_wdt_open, .release = mpcore_wdt_release, }; @@ -349,14 +357,17 @@ static int __devinit mpcore_wdt_probe(struct platform_device *dev) mpcore_wdt_miscdev.parent = &dev->dev; ret = misc_register(&mpcore_wdt_miscdev); if (ret) { - dev_printk(KERN_ERR, _dev, "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + dev_printk(KERN_ERR, _dev, + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto err_misc; } - ret = request_irq(wdt->irq, mpcore_wdt_fire, IRQF_DISABLED, "mpcore_wdt", wdt); + ret = request_irq(wdt->irq, mpcore_wdt_fire, IRQF_DISABLED, + "mpcore_wdt", wdt); if (ret) { - dev_printk(KERN_ERR, _dev, "cannot register IRQ%d for watchdog\n", wdt->irq); + dev_printk(KERN_ERR, _dev, + "cannot register IRQ%d for watchdog\n", wdt->irq); goto err_irq; } @@ -415,7 +426,7 @@ static int __init mpcore_wdt_init(void) */ if (mpcore_wdt_set_heartbeat(mpcore_margin)) { mpcore_wdt_set_heartbeat(TIMER_MARGIN); - printk(KERN_INFO "mpcore_margin value must be 0 Date: Mon, 19 May 2008 14:07:21 +0100 Subject: [PATCH 0034/1024] [WATCHDOG 28/57] mtx-1_wdt: clean up, coding style, unlocked ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/mtx-1_wdt.c | 107 +++++++++++++++++------------------ 1 file changed, 52 insertions(+), 55 deletions(-) diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index a8e67383784..e0b8cdfa5e7 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -1,7 +1,8 @@ /* * Driver for the MTX-1 Watchdog. * - * (C) Copyright 2005 4G Systems , All Rights Reserved. + * (C) Copyright 2005 4G Systems , + * All Rights Reserved. * http://www.4g-systems.biz * * (C) Copyright 2007 OpenWrt.org, Florian Fainelli @@ -46,12 +47,11 @@ #include #include #include - -#include -#include +#include +#include +#include #include -#include #define MTX1_WDT_INTERVAL (5 * HZ) @@ -59,6 +59,7 @@ static int ticks = 100 * HZ; static struct { struct completion stop; + spinlock_t lock; int running; struct timer_list timer; int queue; @@ -71,6 +72,7 @@ static void mtx1_wdt_trigger(unsigned long unused) { u32 tmp; + spin_lock(&mtx1_wdt_device.lock); if (mtx1_wdt_device.running) ticks--; /* @@ -79,13 +81,13 @@ static void mtx1_wdt_trigger(unsigned long unused) tmp = au_readl(GPIO2_DIR); tmp = (tmp & ~(1 << mtx1_wdt_device.gpio)) | ((~tmp) & (1 << mtx1_wdt_device.gpio)); - au_writel (tmp, GPIO2_DIR); + au_writel(tmp, GPIO2_DIR); if (mtx1_wdt_device.queue && ticks) mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL); - else { + else complete(&mtx1_wdt_device.stop); - } + spin_unlock(&mtx1_wdt_device.lock); } static void mtx1_wdt_reset(void) @@ -96,23 +98,25 @@ static void mtx1_wdt_reset(void) static void mtx1_wdt_start(void) { + spin_lock_irqsave(&mtx1_wdt_device.lock, flags); if (!mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 1; gpio_set_value(mtx1_wdt_device.gpio, 1); mod_timer(&mtx1_wdt_device.timer, jiffies + MTX1_WDT_INTERVAL); } mtx1_wdt_device.running++; + spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags); } static int mtx1_wdt_stop(void) { + spin_lock_irqsave(&mtx1_wdt_device.lock, flags); if (mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 0; gpio_set_value(mtx1_wdt_device.gpio, 0); } - ticks = mtx1_wdt_device.default_ticks; - + spin_unlock_irqrestore(&mtx1_wdt_device.lock, flags); return 0; } @@ -122,7 +126,6 @@ static int mtx1_wdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(0, &mtx1_wdt_device.inuse)) return -EBUSY; - return nonseekable_open(inode, file); } @@ -133,54 +136,51 @@ static int mtx1_wdt_release(struct inode *inode, struct file *file) return 0; } -static int mtx1_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long mtx1_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; + int __user *p = (int __user *)argp; unsigned int value; - static struct watchdog_info ident = - { + static const struct watchdog_info ident = { .options = WDIOF_CARDRESET, .identity = "MTX-1 WDT", }; - switch(cmd) { - case WDIOC_KEEPALIVE: - mtx1_wdt_reset(); - break; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - if ( copy_to_user(argp, &value, sizeof(int)) ) - return -EFAULT; - break; - case WDIOC_GETSUPPORT: - if ( copy_to_user(argp, &ident, sizeof(ident)) ) - return -EFAULT; - break; - case WDIOC_SETOPTIONS: - if ( copy_from_user(&value, argp, sizeof(int)) ) - return -EFAULT; - switch(value) { - case WDIOS_ENABLECARD: - mtx1_wdt_start(); - break; - case WDIOS_DISABLECARD: - return mtx1_wdt_stop(); - default: - return -EINVAL; - } - break; - default: - return -ENOTTY; + switch (cmd) { + case WDIOC_KEEPALIVE: + mtx1_wdt_reset(); + break; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + put_user(0, p); + break; + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + case WDIOC_SETOPTIONS: + if (get_user(value, p)) + return -EFAULT; + if (value & WDIOS_ENABLECARD) + mtx1_wdt_start(); + else if (value & WDIOS_DISABLECARD) + mtx1_wdt_stop(); + else + return -EINVAL; + return 0; + default: + return -ENOTTY; } return 0; } -static ssize_t mtx1_wdt_write(struct file *file, const char *buf, size_t count, loff_t *ppos) +static ssize_t mtx1_wdt_write(struct file *file, const char *buf, + size_t count, loff_t *ppos) { if (!count) return -EIO; - mtx1_wdt_reset(); return count; } @@ -188,7 +188,7 @@ static ssize_t mtx1_wdt_write(struct file *file, const char *buf, size_t count, static const struct file_operations mtx1_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .ioctl = mtx1_wdt_ioctl, + .unlocked_ioctl = mtx1_wdt_ioctl, .open = mtx1_wdt_open, .write = mtx1_wdt_write, .release = mtx1_wdt_release @@ -208,29 +208,26 @@ static int mtx1_wdt_probe(struct platform_device *pdev) mtx1_wdt_device.gpio = pdev->resource[0].start; - if ((ret = misc_register(&mtx1_wdt_misc)) < 0) { - printk(KERN_ERR " mtx-1_wdt : failed to register\n"); - return ret; - } - + spin_lock_init(&mtx1_wdt_device.lock); init_completion(&mtx1_wdt_device.stop); mtx1_wdt_device.queue = 0; - clear_bit(0, &mtx1_wdt_device.inuse); - setup_timer(&mtx1_wdt_device.timer, mtx1_wdt_trigger, 0L); - mtx1_wdt_device.default_ticks = ticks; + ret = misc_register(&mtx1_wdt_misc); + if (ret < 0) { + printk(KERN_ERR " mtx-1_wdt : failed to register\n"); + return ret; + } mtx1_wdt_start(); - printk(KERN_INFO "MTX-1 Watchdog driver\n"); - return 0; } static int mtx1_wdt_remove(struct platform_device *pdev) { + /* FIXME: do we need to lock this test ? */ if (mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 0; wait_for_completion(&mtx1_wdt_device.stop); -- GitLab From a86b849868f40f83781f7a7e32e5e5ef939dc570 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:26 +0100 Subject: [PATCH 0035/1024] [WATCHDOG 29/57] mv64x60_wdt: clean up and locking checks Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/mv64x60_wdt.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c index b59ca327396..ac09fe4d957 100644 --- a/drivers/watchdog/mv64x60_wdt.c +++ b/drivers/watchdog/mv64x60_wdt.c @@ -8,7 +8,7 @@ * and services the watchdog. * * Derived from mpc8xx_wdt.c, with the following copyright. - * + * * 2002 (c) Florian Schirmer This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express @@ -24,8 +24,8 @@ #include #include -#include -#include +#include +#include #define MV64x60_WDT_WDC_OFFSET 0 @@ -61,7 +61,9 @@ static DEFINE_SPINLOCK(mv64x60_wdt_spinlock); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static int mv64x60_wdt_toggle_wdc(int enabled_predicate, int field_shift) { @@ -150,7 +152,7 @@ static int mv64x60_wdt_release(struct inode *inode, struct file *file) } static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data, - size_t len, loff_t * ppos) + size_t len, loff_t *ppos) { if (len) { if (!nowayout) { @@ -160,7 +162,7 @@ static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data, for (i = 0; i != len; i++) { char c; - if(get_user(c, data + i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -172,8 +174,8 @@ static ssize_t mv64x60_wdt_write(struct file *file, const char __user *data, return len; } -static int mv64x60_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long mv64x60_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { int timeout; int options; @@ -240,7 +242,7 @@ static const struct file_operations mv64x60_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = mv64x60_wdt_write, - .ioctl = mv64x60_wdt_ioctl, + .unlocked_ioctl = mv64x60_wdt_ioctl, .open = mv64x60_wdt_open, .release = mv64x60_wdt_release, }; -- GitLab From 12b9df7d21d0eedfaaee925f8f9c9aafb1cafa2f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:32 +0100 Subject: [PATCH 0036/1024] [WATCHDOG 30/57] omap_wdt: locking, unlocked_ioctl, tidy Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/omap_wdt.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 74bc39aa1ce..ccdf069792d 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -41,9 +41,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include @@ -54,11 +54,12 @@ module_param(timer_margin, uint, 0); MODULE_PARM_DESC(timer_margin, "initial watchdog timeout (in seconds)"); static int omap_wdt_users; -static struct clk *armwdt_ck = NULL; -static struct clk *mpu_wdt_ick = NULL; -static struct clk *mpu_wdt_fck = NULL; +static struct clk *armwdt_ck; +static struct clk *mpu_wdt_ick; +static struct clk *mpu_wdt_fck; static unsigned int wdt_trgr_pattern = 0x1234; +static spinlock_t wdt_lock; static void omap_wdt_ping(void) { @@ -174,22 +175,23 @@ static int omap_wdt_release(struct inode *inode, struct file *file) return 0; } -static ssize_t -omap_wdt_write(struct file *file, const char __user *data, +static ssize_t omap_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) { /* Refresh LOAD_TIME. */ - if (len) + if (len) { + spin_lock(&wdt_lock); omap_wdt_ping(); + spin_unlock(&wdt_lock); + } return len; } -static int -omap_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long omap_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_margin; - static struct watchdog_info ident = { + static const struct watchdog_info ident = { .identity = "OMAP Watchdog", .options = WDIOF_SETTIMEOUT, .firmware_version = 0, @@ -211,18 +213,22 @@ omap_wdt_ioctl(struct inode *inode, struct file *file, return put_user(omap_prcm_get_reset_sources(), (int __user *)arg); case WDIOC_KEEPALIVE: + spin_lock(&wdt_lock); omap_wdt_ping(); + spin_unlock(&wdt_lock); return 0; case WDIOC_SETTIMEOUT: if (get_user(new_margin, (int __user *)arg)) return -EFAULT; omap_wdt_adjust_timeout(new_margin); + spin_lock(&wdt_lock); omap_wdt_disable(); omap_wdt_set_timeout(); omap_wdt_enable(); omap_wdt_ping(); + spin_unlock(&wdt_lock); /* Fall */ case WDIOC_GETTIMEOUT: return put_user(timer_margin, (int __user *)arg); @@ -232,7 +238,7 @@ omap_wdt_ioctl(struct inode *inode, struct file *file, static const struct file_operations omap_wdt_fops = { .owner = THIS_MODULE, .write = omap_wdt_write, - .ioctl = omap_wdt_ioctl, + .unlocked_ioctl = omap_wdt_ioctl, .open = omap_wdt_open, .release = omap_wdt_release, }; @@ -373,6 +379,7 @@ static struct platform_driver omap_wdt_driver = { static int __init omap_wdt_init(void) { + spin_lock_init(&wdt_lock); return platform_driver_register(&omap_wdt_driver); } -- GitLab From aee334c23c9a559ce6334bd6ba74a5708b600ada Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:37 +0100 Subject: [PATCH 0037/1024] [WATCHDOG 31/57] pc87413_wdt: clean up, coding style, unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/pc87413_wdt.c | 211 ++++++++++++++------------------- 1 file changed, 87 insertions(+), 124 deletions(-) diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c index 15e4f8887a9..326f2d2ded3 100644 --- a/drivers/watchdog/pc87413_wdt.c +++ b/drivers/watchdog/pc87413_wdt.c @@ -31,9 +31,9 @@ #include #include #include +#include +#include -#include -#include #include /* #define DEBUG 1 */ @@ -56,12 +56,12 @@ static int io = 0x2E; /* Address used on Portwell Boards */ -static int timeout = DEFAULT_TIMEOUT; /* timeout value */ -static unsigned long timer_enabled = 0; /* is the timer enabled? */ +static int timeout = DEFAULT_TIMEOUT; /* timeout value */ +static unsigned long timer_enabled; /* is the timer enabled? */ -static char expect_close; /* is the close expected? */ +static char expect_close; /* is the close expected? */ -static DEFINE_SPINLOCK(io_lock);/* to guard the watchdog from io races */ +static DEFINE_SPINLOCK(io_lock); /* to guard us from io races */ static int nowayout = WATCHDOG_NOWAYOUT; @@ -69,7 +69,7 @@ static int nowayout = WATCHDOG_NOWAYOUT; /* Select pins for Watchdog output */ -static inline void pc87413_select_wdt_out (void) +static inline void pc87413_select_wdt_out(void) { unsigned int cr_data = 0; @@ -77,7 +77,7 @@ static inline void pc87413_select_wdt_out (void) outb_p(SIOCFG2, WDT_INDEX_IO_PORT); - cr_data = inb (WDT_DATA_IO_PORT); + cr_data = inb(WDT_DATA_IO_PORT); cr_data |= 0x80; /* Set Bit7 to 1*/ outb_p(SIOCFG2, WDT_INDEX_IO_PORT); @@ -85,8 +85,9 @@ static inline void pc87413_select_wdt_out (void) outb_p(cr_data, WDT_DATA_IO_PORT); #ifdef DEBUG - printk(KERN_INFO DPFX "Select multiple pin,pin55,as WDT output:" - " Bit7 to 1: %d\n", cr_data); + printk(KERN_INFO DPFX + "Select multiple pin,pin55,as WDT output: Bit7 to 1: %d\n", + cr_data); #endif } @@ -94,7 +95,7 @@ static inline void pc87413_select_wdt_out (void) static inline void pc87413_enable_swc(void) { - unsigned int cr_data=0; + unsigned int cr_data = 0; /* Step 2: Enable SWC functions */ @@ -129,12 +130,11 @@ static inline unsigned int pc87413_get_swc_base(void) addr_l = inb(WDT_DATA_IO_PORT); swc_base_addr = (addr_h << 8) + addr_l; - #ifdef DEBUG - printk(KERN_INFO DPFX "Read SWC I/O Base Address: low %d, high %d," - " res %d\n", addr_l, addr_h, swc_base_addr); + printk(KERN_INFO DPFX + "Read SWC I/O Base Address: low %d, high %d, res %d\n", + addr_l, addr_h, swc_base_addr); #endif - return swc_base_addr; } @@ -143,9 +143,7 @@ static inline unsigned int pc87413_get_swc_base(void) static inline void pc87413_swc_bank3(unsigned int swc_base_addr) { /* Step 4: Select Bank3 of SWC */ - outb_p(inb(swc_base_addr + 0x0f) | 0x03, swc_base_addr + 0x0f); - #ifdef DEBUG printk(KERN_INFO DPFX "Select Bank3 of SWC\n"); #endif @@ -157,9 +155,7 @@ static inline void pc87413_programm_wdto(unsigned int swc_base_addr, char pc87413_time) { /* Step 5: Programm WDTO, Twd. */ - outb_p(pc87413_time, swc_base_addr + WDTO); - #ifdef DEBUG printk(KERN_INFO DPFX "Set WDTO to %d minutes\n", pc87413_time); #endif @@ -170,9 +166,7 @@ static inline void pc87413_programm_wdto(unsigned int swc_base_addr, static inline void pc87413_enable_wden(unsigned int swc_base_addr) { /* Step 6: Enable WDEN */ - - outb_p(inb (swc_base_addr + WDCTL) | 0x01, swc_base_addr + WDCTL); - + outb_p(inb(swc_base_addr + WDCTL) | 0x01, swc_base_addr + WDCTL); #ifdef DEBUG printk(KERN_INFO DPFX "Enable WDEN\n"); #endif @@ -182,9 +176,7 @@ static inline void pc87413_enable_wden(unsigned int swc_base_addr) static inline void pc87413_enable_sw_wd_tren(unsigned int swc_base_addr) { /* Enable SW_WD_TREN */ - - outb_p(inb (swc_base_addr + WDCFG) | 0x80, swc_base_addr + WDCFG); - + outb_p(inb(swc_base_addr + WDCFG) | 0x80, swc_base_addr + WDCFG); #ifdef DEBUG printk(KERN_INFO DPFX "Enable SW_WD_TREN\n"); #endif @@ -195,9 +187,7 @@ static inline void pc87413_enable_sw_wd_tren(unsigned int swc_base_addr) static inline void pc87413_disable_sw_wd_tren(unsigned int swc_base_addr) { /* Disable SW_WD_TREN */ - - outb_p(inb (swc_base_addr + WDCFG) & 0x7f, swc_base_addr + WDCFG); - + outb_p(inb(swc_base_addr + WDCFG) & 0x7f, swc_base_addr + WDCFG); #ifdef DEBUG printk(KERN_INFO DPFX "pc87413 - Disable SW_WD_TREN\n"); #endif @@ -208,9 +198,7 @@ static inline void pc87413_disable_sw_wd_tren(unsigned int swc_base_addr) static inline void pc87413_enable_sw_wd_trg(unsigned int swc_base_addr) { /* Enable SW_WD_TRG */ - - outb_p(inb (swc_base_addr + WDCTL) | 0x80, swc_base_addr + WDCTL); - + outb_p(inb(swc_base_addr + WDCTL) | 0x80, swc_base_addr + WDCTL); #ifdef DEBUG printk(KERN_INFO DPFX "pc87413 - Enable SW_WD_TRG\n"); #endif @@ -221,9 +209,7 @@ static inline void pc87413_enable_sw_wd_trg(unsigned int swc_base_addr) static inline void pc87413_disable_sw_wd_trg(unsigned int swc_base_addr) { /* Disable SW_WD_TRG */ - - outb_p(inb (swc_base_addr + WDCTL) & 0x7f, swc_base_addr + WDCTL); - + outb_p(inb(swc_base_addr + WDCTL) & 0x7f, swc_base_addr + WDCTL); #ifdef DEBUG printk(KERN_INFO DPFX "Disable SW_WD_TRG\n"); #endif @@ -314,8 +300,8 @@ static int pc87413_open(struct inode *inode, struct file *file) /* Reload and activate timer */ pc87413_refresh(); - printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to" - " %d minute(s).\n", timeout); + printk(KERN_INFO MODNAME + "Watchdog enabled. Timeout set to %d minute(s).\n", timeout); return nonseekable_open(inode, file); } @@ -338,17 +324,15 @@ static int pc87413_release(struct inode *inode, struct file *file) if (expect_close == 42) { pc87413_disable(); - printk(KERN_INFO MODNAME "Watchdog disabled," - " sleeping again...\n"); + printk(KERN_INFO MODNAME + "Watchdog disabled, sleeping again...\n"); } else { - printk(KERN_CRIT MODNAME "Unexpected close, not stopping" - " watchdog!\n"); + printk(KERN_CRIT MODNAME + "Unexpected close, not stopping watchdog!\n"); pc87413_refresh(); } - clear_bit(0, &timer_enabled); expect_close = 0; - return 0; } @@ -386,7 +370,8 @@ static ssize_t pc87413_write(struct file *file, const char __user *data, /* reset expect flag */ expect_close = 0; - /* scan to see whether or not we got the magic character */ + /* scan to see whether or not we got the + magic character */ for (i = 0; i != len; i++) { char c; if (get_user(c, data+i)) @@ -404,7 +389,6 @@ static ssize_t pc87413_write(struct file *file, const char __user *data, /** * pc87413_ioctl: - * @inode: inode of the device * @file: file handle to the device * @cmd: watchdog command * @arg: argument pointer @@ -414,8 +398,8 @@ static ssize_t pc87413_write(struct file *file, const char __user *data, * querying capabilities and current status. */ -static int pc87413_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long pc87413_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_timeout; @@ -426,75 +410,58 @@ static int pc87413_ioctl(struct inode *inode, struct file *file, static struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING | - WDIOF_SETTIMEOUT | - WDIOF_MAGICCLOSE, + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "PC87413(HF/F) watchdog" }; uarg.i = (int __user *)arg; - switch(cmd) { - default: - return -ENOTTY; - - case WDIOC_GETSUPPORT: - return copy_to_user(uarg.ident, &ident, - sizeof(ident)) ? -EFAULT : 0; - - case WDIOC_GETSTATUS: - return put_user(pc87413_status(), uarg.i); - - case WDIOC_GETBOOTSTATUS: - return put_user(0, uarg.i); - - case WDIOC_KEEPALIVE: - pc87413_refresh(); + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &ident, + sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + return put_user(pc87413_status(), uarg.i); + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + case WDIOC_KEEPALIVE: + pc87413_refresh(); #ifdef DEBUG - printk(KERN_INFO DPFX "keepalive\n"); + printk(KERN_INFO DPFX "keepalive\n"); #endif - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, uarg.i)) - return -EFAULT; - - // the API states this is given in secs - new_timeout /= 60; - - if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) - return -EINVAL; - - timeout = new_timeout; - pc87413_refresh(); - - // fall through and return the new timeout... - - case WDIOC_GETTIMEOUT: - - new_timeout = timeout * 60; - - return put_user(new_timeout, uarg.i); - - case WDIOC_SETOPTIONS: - { - int options, retval = -EINVAL; - - if (get_user(options, uarg.i)) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) { - pc87413_disable(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) { - pc87413_enable(); - retval = 0; - } - - return retval; + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + /* the API states this is given in secs */ + new_timeout /= 60; + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + timeout = new_timeout; + pc87413_refresh(); + /* fall through and return the new timeout... */ + case WDIOC_GETTIMEOUT: + new_timeout = timeout * 60; + return put_user(new_timeout, uarg.i); + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + if (get_user(options, uarg.i)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + pc87413_disable(); + retval = 0; } + if (options & WDIOS_ENABLECARD) { + pc87413_enable(); + retval = 0; + } + return retval; + } + default: + return -ENOTTY; } } @@ -517,10 +484,8 @@ static int pc87413_notify_sys(struct notifier_block *this, void *unused) { if (code == SYS_DOWN || code == SYS_HALT) - { /* Turn the card off */ pc87413_disable(); - } return NOTIFY_DONE; } @@ -530,18 +495,16 @@ static const struct file_operations pc87413_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = pc87413_write, - .ioctl = pc87413_ioctl, + .unlocked_ioctl = pc87413_ioctl, .open = pc87413_open, .release = pc87413_release, }; -static struct notifier_block pc87413_notifier = -{ +static struct notifier_block pc87413_notifier = { .notifier_call = pc87413_notify_sys, }; -static struct miscdevice pc87413_miscdev= -{ +static struct miscdevice pc87413_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &pc87413_fops @@ -561,29 +524,26 @@ static int __init pc87413_init(void) { int ret; - printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n", WDT_INDEX_IO_PORT); + printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n", + WDT_INDEX_IO_PORT); /* request_region(io, 2, "pc87413"); */ ret = register_reboot_notifier(&pc87413_notifier); if (ret != 0) { - printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - ret); + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", ret); } ret = misc_register(&pc87413_miscdev); - if (ret != 0) { printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, ret); unregister_reboot_notifier(&pc87413_notifier); return ret; } - printk(KERN_INFO PFX "initialized. timeout=%d min \n", timeout); - pc87413_enable(); - return 0; } @@ -600,8 +560,7 @@ static int __init pc87413_init(void) static void __exit pc87413_exit(void) { /* Stop the timer before we leave */ - if (!nowayout) - { + if (!nowayout) { pc87413_disable(); printk(KERN_INFO MODNAME "Watchdog disabled.\n"); } @@ -626,8 +585,12 @@ module_param(io, int, 0); MODULE_PARM_DESC(io, MODNAME " I/O port (default: " __MODULE_STRING(io) ")."); module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in minutes (default=" __MODULE_STRING(timeout) ")."); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in minutes (default=" + __MODULE_STRING(timeout) ")."); module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -- GitLab From 261dcc70aae926ba7b9218da7302f0ad2f665b79 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:43 +0100 Subject: [PATCH 0038/1024] [WATCHDOG 32/57] pcwd: clean up, unlocked_ioctl usage Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/pcwd.c | 179 ++++++++++++++++++++++------------------ 1 file changed, 100 insertions(+), 79 deletions(-) diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c index 7b41434fac8..e1259adf09f 100644 --- a/drivers/watchdog/pcwd.c +++ b/drivers/watchdog/pcwd.c @@ -40,13 +40,15 @@ * fairly useless proc entry. * 990610 removed said useless proc code for the merge * 000403 Removed last traces of proc code. - * 011214 Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT + * 011214 Added nowayout module option to override + * CONFIG_WATCHDOG_NOWAYOUT * Added timeout module option to override default */ /* * A bells and whistles driver is available from http://www.pcwd.de/ - * More info available at http://www.berkprod.com/ or http://www.pcwatchdog.com/ + * More info available at http://www.berkprod.com/ or + * http://www.pcwatchdog.com/ */ #include /* For module specific items */ @@ -65,9 +67,8 @@ #include /* For isa devices */ #include /* For io-port access */ #include /* For spin_lock/spin_unlock/... */ - -#include /* For copy_to_user/put_user/... */ -#include /* For inb/outb/... */ +#include /* For copy_to_user/put_user/... */ +#include /* For inb/outb/... */ /* Module and version information */ #define WATCHDOG_VERSION "1.20" @@ -111,14 +112,16 @@ static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 }; #define WD_REVC_WTRP 0x01 /* Watchdog Trip status */ #define WD_REVC_HRBT 0x02 /* Watchdog Heartbeat */ #define WD_REVC_TTRP 0x04 /* Temperature Trip status */ -#define WD_REVC_RL2A 0x08 /* Relay 2 activated by on-board processor */ +#define WD_REVC_RL2A 0x08 /* Relay 2 activated by + on-board processor */ #define WD_REVC_RL1A 0x10 /* Relay 1 active */ #define WD_REVC_R2DS 0x40 /* Relay 2 disable */ #define WD_REVC_RLY2 0x80 /* Relay 2 activated? */ /* Port 2 : Control Status #2 */ #define WD_WDIS 0x10 /* Watchdog Disabled */ #define WD_ENTP 0x20 /* Watchdog Enable Temperature Trip */ -#define WD_SSEL 0x40 /* Watchdog Switch Select (1:SW1 <-> 0:SW2) */ +#define WD_SSEL 0x40 /* Watchdog Switch Select + (1:SW1 <-> 0:SW2) */ #define WD_WCMD 0x80 /* Watchdog Command Mode */ /* max. time we give an ISA watchdog card to process a command */ @@ -168,11 +171,15 @@ static int cards_found; static atomic_t open_allowed = ATOMIC_INIT(1); static char expect_close; static int temp_panic; -static struct { /* this is private data for each ISA-PC watchdog card */ + +/* this is private data for each ISA-PC watchdog card */ +static struct { char fw_ver_str[6]; /* The cards firmware version */ int revision; /* The card's revision */ - int supports_temp; /* Wether or not the card has a temperature device */ - int command_mode; /* Wether or not the card is in command mode */ + int supports_temp; /* Whether or not the card has + a temperature device */ + int command_mode; /* Whether or not the card is in + command mode */ int boot_status; /* The card's boot status */ int io_addr; /* The cards I/O address */ spinlock_t io_lock; /* the lock for io operations */ @@ -186,16 +193,20 @@ static struct { /* this is private data for each ISA-PC watchdog card */ #define DEBUG 2 /* print fancy stuff too */ static int debug = QUIET; module_param(debug, int, 0); -MODULE_PARM_DESC(debug, "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)"); +MODULE_PARM_DESC(debug, + "Debug level: 0=Quiet, 1=Verbose, 2=Debug (default=0)"); -#define WATCHDOG_HEARTBEAT 0 /* default heartbeat = delay-time from dip-switches */ +/* default heartbeat = delay-time from dip-switches */ +#define WATCHDOG_HEARTBEAT 0 static int heartbeat = WATCHDOG_HEARTBEAT; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<=heartbeat<=7200 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2 <= heartbeat <= 7200 or 0=delay-time from dip-switches, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Internal functions @@ -224,7 +235,7 @@ static int send_isa_command(int cmd) if (port0 == last_port0) break; /* Data is stable */ - udelay (250); + udelay(250); } if (debug >= DEBUG) @@ -236,7 +247,7 @@ static int send_isa_command(int cmd) static int set_command_mode(void) { - int i, found=0, count=0; + int i, found = 0, count = 0; /* Set the card into command mode */ spin_lock(&pcwd_private.io_lock); @@ -296,7 +307,8 @@ static inline void pcwd_get_firmware(void) ten = send_isa_command(CMD_ISA_VERSION_TENTH); hund = send_isa_command(CMD_ISA_VERSION_HUNDRETH); minor = send_isa_command(CMD_ISA_VERSION_MINOR); - sprintf(pcwd_private.fw_ver_str, "%c.%c%c%c", one, ten, hund, minor); + sprintf(pcwd_private.fw_ver_str, "%c.%c%c%c", + one, ten, hund, minor); } unset_command_mode(); @@ -305,7 +317,7 @@ static inline void pcwd_get_firmware(void) static inline int pcwd_get_option_switches(void) { - int option_switches=0; + int option_switches = 0; if (set_command_mode()) { /* Get switch settings */ @@ -322,7 +334,9 @@ static void pcwd_show_card_info(void) /* Get some extra info from the hardware (in command/debug/diag mode) */ if (pcwd_private.revision == PCWD_REVISION_A) - printk(KERN_INFO PFX "ISA-PC Watchdog (REV.A) detected at port 0x%04x\n", pcwd_private.io_addr); + printk(KERN_INFO PFX + "ISA-PC Watchdog (REV.A) detected at port 0x%04x\n", + pcwd_private.io_addr); else if (pcwd_private.revision == PCWD_REVISION_C) { pcwd_get_firmware(); printk(KERN_INFO PFX "ISA-PC Watchdog (REV.C) detected at port 0x%04x (Firmware version: %s)\n", @@ -347,12 +361,15 @@ static void pcwd_show_card_info(void) printk(KERN_INFO PFX "Previous reboot was caused by the card\n"); if (pcwd_private.boot_status & WDIOF_OVERHEAT) { - printk(KERN_EMERG PFX "Card senses a CPU Overheat. Panicking!\n"); - printk(KERN_EMERG PFX "CPU Overheat\n"); + printk(KERN_EMERG PFX + "Card senses a CPU Overheat. Panicking!\n"); + printk(KERN_EMERG PFX + "CPU Overheat\n"); } if (pcwd_private.boot_status == 0) - printk(KERN_INFO PFX "No previous trip detected - Cold boot or reset\n"); + printk(KERN_INFO PFX + "No previous trip detected - Cold boot or reset\n"); } static void pcwd_timer_ping(unsigned long data) @@ -361,11 +378,12 @@ static void pcwd_timer_ping(unsigned long data) /* If we got a heartbeat pulse within the WDT_INTERVAL * we agree to ping the WDT */ - if(time_before(jiffies, pcwd_private.next_heartbeat)) { + if (time_before(jiffies, pcwd_private.next_heartbeat)) { /* Ping the watchdog */ spin_lock(&pcwd_private.io_lock); if (pcwd_private.revision == PCWD_REVISION_A) { - /* Rev A cards are reset by setting the WD_WDRST bit in register 1 */ + /* Rev A cards are reset by setting the + WD_WDRST bit in register 1 */ wdrst_stat = inb_p(pcwd_private.io_addr); wdrst_stat &= 0x0F; wdrst_stat |= WD_WDRST; @@ -381,7 +399,8 @@ static void pcwd_timer_ping(unsigned long data) spin_unlock(&pcwd_private.io_lock); } else { - printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); + printk(KERN_WARNING PFX + "Heartbeat lost! Will not ping the watchdog\n"); } } @@ -454,7 +473,7 @@ static int pcwd_keepalive(void) static int pcwd_set_heartbeat(int t) { - if ((t < 2) || (t > 7200)) /* arbitrary upper limit */ + if (t < 2 || t > 7200) /* arbitrary upper limit */ return -EINVAL; heartbeat = t; @@ -470,7 +489,7 @@ static int pcwd_get_status(int *status) { int control_status; - *status=0; + *status = 0; spin_lock(&pcwd_private.io_lock); if (pcwd_private.revision == PCWD_REVISION_A) /* Rev A cards return status information from @@ -494,9 +513,9 @@ static int pcwd_get_status(int *status) if (control_status & WD_T110) { *status |= WDIOF_OVERHEAT; if (temp_panic) { - printk(KERN_INFO PFX "Temperature overheat trip!\n"); + printk(KERN_INFO PFX + "Temperature overheat trip!\n"); kernel_power_off(); - /* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */ } } } else { @@ -506,9 +525,9 @@ static int pcwd_get_status(int *status) if (control_status & WD_REVC_TTRP) { *status |= WDIOF_OVERHEAT; if (temp_panic) { - printk(KERN_INFO PFX "Temperature overheat trip!\n"); + printk(KERN_INFO PFX + "Temperature overheat trip!\n"); kernel_power_off(); - /* or should we just do a: panic(PFX "Temperature overheat trip!\n"); */ } } } @@ -524,18 +543,21 @@ static int pcwd_clear_status(void) spin_lock(&pcwd_private.io_lock); if (debug >= VERBOSE) - printk(KERN_INFO PFX "clearing watchdog trip status\n"); + printk(KERN_INFO PFX + "clearing watchdog trip status\n"); control_status = inb_p(pcwd_private.io_addr + 1); if (debug >= DEBUG) { - printk(KERN_DEBUG PFX "status was: 0x%02x\n", control_status); + printk(KERN_DEBUG PFX "status was: 0x%02x\n", + control_status); printk(KERN_DEBUG PFX "sending: 0x%02x\n", (control_status & WD_REVC_R2DS)); } /* clear reset status & Keep Relay 2 disable state as it is */ - outb_p((control_status & WD_REVC_R2DS), pcwd_private.io_addr + 1); + outb_p((control_status & WD_REVC_R2DS), + pcwd_private.io_addr + 1); spin_unlock(&pcwd_private.io_lock); } @@ -572,8 +594,7 @@ static int pcwd_get_temperature(int *temperature) * /dev/watchdog handling */ -static int pcwd_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long pcwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { int rv; int status; @@ -590,12 +611,12 @@ static int pcwd_ioctl(struct inode *inode, struct file *file, .identity = "PCWD", }; - switch(cmd) { + switch (cmd) { default: return -ENOTTY; case WDIOC_GETSUPPORT: - if(copy_to_user(argp, &ident, sizeof(ident))) + if (copy_to_user(argp, &ident, sizeof(ident))) return -EFAULT; return 0; @@ -613,25 +634,22 @@ static int pcwd_ioctl(struct inode *inode, struct file *file, return put_user(temperature, argp); case WDIOC_SETOPTIONS: - if (pcwd_private.revision == PCWD_REVISION_C) - { - if(copy_from_user(&rv, argp, sizeof(int))) + if (pcwd_private.revision == PCWD_REVISION_C) { + if (get_user(rv, argp)) return -EFAULT; - if (rv & WDIOS_DISABLECARD) - { - return pcwd_stop(); + if (rv & WDIOS_DISABLECARD) { + status = pcwd_stop(); + if (status < 0) + return status; } - - if (rv & WDIOS_ENABLECARD) - { - return pcwd_start(); + if (rv & WDIOS_ENABLECARD) { + status = pcwd_start(); + if (status < 0) + return status; } - if (rv & WDIOS_TEMPPANIC) - { temp_panic = 1; - } } return -EINVAL; @@ -682,16 +700,10 @@ static ssize_t pcwd_write(struct file *file, const char __user *buf, size_t len, static int pcwd_open(struct inode *inode, struct file *file) { - if (!atomic_dec_and_test(&open_allowed) ) { - if (debug >= VERBOSE) - printk(KERN_ERR PFX "Attempt to open already opened device.\n"); - atomic_inc( &open_allowed ); + if (test_and_set_bit(0, &open_allowed)) return -EBUSY; - } - if (nowayout) __module_get(THIS_MODULE); - /* Activate */ pcwd_start(); pcwd_keepalive(); @@ -700,14 +712,15 @@ static int pcwd_open(struct inode *inode, struct file *file) static int pcwd_close(struct inode *inode, struct file *file) { - if (expect_close == 42) { + if (expect_close == 42) pcwd_stop(); - } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + else { + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); pcwd_keepalive(); } expect_close = 0; - atomic_inc( &open_allowed ); + clear_bit(0, &open_allowed); return 0; } @@ -750,7 +763,7 @@ static const struct file_operations pcwd_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = pcwd_write, - .ioctl = pcwd_ioctl, + .unlocked_ioctl = pcwd_ioctl, .open = pcwd_open, .release = pcwd_close, }; @@ -788,7 +801,7 @@ static inline int get_revision(void) * presumes a floating bus reads as 0xff. */ if ((inb(pcwd_private.io_addr + 2) == 0xFF) || (inb(pcwd_private.io_addr + 3) == 0xFF)) - r=PCWD_REVISION_A; + r = PCWD_REVISION_A; spin_unlock(&pcwd_private.io_lock); return r; @@ -803,7 +816,7 @@ static inline int get_revision(void) */ static int __devinit pcwd_isa_match(struct device *dev, unsigned int id) { - int base_addr=pcwd_ioports[id]; + int base_addr = pcwd_ioports[id]; int port0, last_port0; /* Reg 0, in case it's REV A */ int port1, last_port1; /* Register 1 for REV C cards */ int i; @@ -813,7 +826,7 @@ static int __devinit pcwd_isa_match(struct device *dev, unsigned int id) printk(KERN_DEBUG PFX "pcwd_isa_match id=%d\n", id); - if (!request_region (base_addr, 4, "PCWD")) { + if (!request_region(base_addr, 4, "PCWD")) { printk(KERN_INFO PFX "Port 0x%04x unavailable\n", base_addr); return 0; } @@ -842,7 +855,7 @@ static int __devinit pcwd_isa_match(struct device *dev, unsigned int id) } } } - release_region (base_addr, 4); + release_region(base_addr, 4); return retval; } @@ -857,7 +870,8 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id) cards_found++; if (cards_found == 1) - printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n", WD_VER); + printk(KERN_INFO PFX "v%s Ken Hollis (kenji@bitgate.com)\n", + WD_VER); if (cards_found > 1) { printk(KERN_ERR PFX "This driver only supports 1 device\n"); @@ -875,10 +889,11 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id) /* Check card's revision */ pcwd_private.revision = get_revision(); - if (!request_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) { + if (!request_region(pcwd_private.io_addr, + (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4, "PCWD")) { printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", pcwd_private.io_addr); - ret=-EIO; + ret = -EIO; goto error_request_region; } @@ -908,26 +923,30 @@ static int __devinit pcwd_isa_probe(struct device *dev, unsigned int id) if (heartbeat == 0) heartbeat = heartbeat_tbl[(pcwd_get_option_switches() & 0x07)]; - /* Check that the heartbeat value is within it's range ; if not reset to the default */ + /* Check that the heartbeat value is within it's range; + if not reset to the default */ if (pcwd_set_heartbeat(heartbeat)) { pcwd_set_heartbeat(WATCHDOG_HEARTBEAT); - printk(KERN_INFO PFX "heartbeat value must be 2<=heartbeat<=7200, using %d\n", - WATCHDOG_HEARTBEAT); + printk(KERN_INFO PFX + "heartbeat value must be 2 <= heartbeat <= 7200, using %d\n", + WATCHDOG_HEARTBEAT); } if (pcwd_private.supports_temp) { ret = misc_register(&temp_miscdev); if (ret) { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - TEMP_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + TEMP_MINOR, ret); goto error_misc_register_temp; } } ret = misc_register(&pcwd_miscdev); if (ret) { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto error_misc_register_watchdog; } @@ -940,7 +959,8 @@ error_misc_register_watchdog: if (pcwd_private.supports_temp) misc_deregister(&temp_miscdev); error_misc_register_temp: - release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4); + release_region(pcwd_private.io_addr, + (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4); error_request_region: pcwd_private.io_addr = 0x0000; cards_found--; @@ -964,7 +984,8 @@ static int __devexit pcwd_isa_remove(struct device *dev, unsigned int id) misc_deregister(&pcwd_miscdev); if (pcwd_private.supports_temp) misc_deregister(&temp_miscdev); - release_region(pcwd_private.io_addr, (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4); + release_region(pcwd_private.io_addr, + (pcwd_private.revision == PCWD_REVISION_A) ? 2 : 4); pcwd_private.io_addr = 0x0000; cards_found--; -- GitLab From 84ca995c258df70a8914866e8c996845003ff938 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:48 +0100 Subject: [PATCH 0039/1024] [WATCHDOG 33/57] pnx4008_wdt: unlocked_ioctl setup Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/pnx4008_wdt.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 6b8483d3c78..8cd0d53941e 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -30,8 +30,8 @@ #include #include -#include -#include +#include +#include #define MODULE_NAME "PNX4008-WDT: " @@ -144,9 +144,8 @@ static int pnx4008_wdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static ssize_t -pnx4008_wdt_write(struct file *file, const char *data, size_t len, - loff_t * ppos) +static ssize_t pnx4008_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { if (len) { if (!nowayout) { @@ -169,15 +168,14 @@ pnx4008_wdt_write(struct file *file, const char *data, size_t len, return len; } -static struct watchdog_info ident = { +static const struct watchdog_info ident = { .options = WDIOF_CARDRESET | WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, .identity = "PNX4008 Watchdog", }; -static int -pnx4008_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long pnx4008_wdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) { int ret = -ENOTTY; int time; @@ -238,7 +236,7 @@ static const struct file_operations pnx4008_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = pnx4008_wdt_write, - .ioctl = pnx4008_wdt_ioctl, + .unlocked_ioctl = pnx4008_wdt_ioctl, .open = pnx4008_wdt_open, .release = pnx4008_wdt_release, }; -- GitLab From 72d5c0505bafae1a393f50e169e20b682d37f28e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:07:54 +0100 Subject: [PATCH 0040/1024] [WATCHDOG 34/57] rm9k_wdt: clean up Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/rm9k_wdt.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c index 5c921e47156..c172906b553 100644 --- a/drivers/watchdog/rm9k_wdt.c +++ b/drivers/watchdog/rm9k_wdt.c @@ -29,10 +29,10 @@ #include #include #include -#include +#include +#include #include #include -#include #include #include @@ -53,10 +53,12 @@ static void wdt_gpi_stop(void); static void wdt_gpi_set_timeout(unsigned int); static int wdt_gpi_open(struct inode *, struct file *); static int wdt_gpi_release(struct inode *, struct file *); -static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t, loff_t *); +static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t, + loff_t *); static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long); static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *); -static const struct resource *wdt_gpi_get_resource(struct platform_device *, const char *, unsigned int); +static const struct resource *wdt_gpi_get_resource(struct platform_device *, + const char *, unsigned int); static int __init wdt_gpi_probe(struct device *); static int __exit wdt_gpi_remove(struct device *); @@ -68,7 +70,7 @@ static int locked; /* These are set from device resources */ -static void __iomem * wd_regs; +static void __iomem *wd_regs; static unsigned int wd_irq, wd_ctr; @@ -216,7 +218,8 @@ static int wdt_gpi_release(struct inode *inode, struct file *file) if (expect_close) { wdt_gpi_stop(); free_irq(wd_irq, &miscdev); - printk(KERN_INFO "%s: watchdog stopped\n", wdt_gpi_name); + printk(KERN_INFO "%s: watchdog stopped\n", + wdt_gpi_name); } else { printk(KERN_CRIT "%s: unexpected close() -" " watchdog left running\n", @@ -241,8 +244,7 @@ wdt_gpi_write(struct file *f, const char __user *d, size_t s, loff_t *o) return s ? 1 : 0; } -static long -wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg) +static long wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg) { long res = -ENOTTY; const long size = _IOC_SIZE(cmd); @@ -271,7 +273,8 @@ wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg) case WDIOC_GETSUPPORT: wdinfo.options = nowayout ? WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING : - WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE; + WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE; res = __copy_to_user(argp, &wdinfo, size) ? -EFAULT : size; break; -- GitLab From edef7a93f9414e1d4864150eabb49a618222c2bd Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:00 +0100 Subject: [PATCH 0041/1024] [WATCHDOG 35/57] s3c2410: watchdog cleanup and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/s3c2410_wdt.c | 148 ++++++++++++++++++--------------- 1 file changed, 80 insertions(+), 68 deletions(-) diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 98532c0e068..97b4a2e8eb0 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -46,9 +46,8 @@ #include #include #include - -#include -#include +#include +#include #include @@ -65,8 +64,8 @@ static int nowayout = WATCHDOG_NOWAYOUT; static int tmr_margin = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME; static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT; -static int soft_noboot = 0; -static int debug = 0; +static int soft_noboot; +static int debug; module_param(tmr_margin, int, 0); module_param(tmr_atboot, int, 0); @@ -74,24 +73,23 @@ module_param(nowayout, int, 0); module_param(soft_noboot, int, 0); module_param(debug, int, 0); -MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")"); - -MODULE_PARM_DESC(tmr_atboot, "Watchdog is started at boot time if set to 1, default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT)); - -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); - +MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default=" + __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")"); +MODULE_PARM_DESC(tmr_atboot, + "Watchdog is started at boot time if set to 1, default=" + __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT)); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default depends on ONLY_TESTING)"); - MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)"); typedef enum close_state { CLOSE_STATE_NOT, - CLOSE_STATE_ALLOW=0x4021 + CLOSE_STATE_ALLOW = 0x4021 } close_state_t; -static DECLARE_MUTEX(open_lock); - +static unsigned long open_lock; static struct device *wdt_dev; /* platform device attached to */ static struct resource *wdt_mem; static struct resource *wdt_irq; @@ -99,38 +97,58 @@ static struct clk *wdt_clock; static void __iomem *wdt_base; static unsigned int wdt_count; static close_state_t allow_close; +static DEFINE_SPINLOCK(wdt_lock); /* watchdog control routines */ #define DBG(msg...) do { \ if (debug) \ printk(KERN_INFO msg); \ - } while(0) + } while (0) /* functions */ -static int s3c2410wdt_keepalive(void) +static void s3c2410wdt_keepalive(void) { + spin_lock(&wdt_lock); writel(wdt_count, wdt_base + S3C2410_WTCNT); - return 0; + spin_unlock(&wdt_lock); } -static int s3c2410wdt_stop(void) +static void __s3c2410wdt_stop(void) { unsigned long wtcon; + spin_lock(&wdt_lock); wtcon = readl(wdt_base + S3C2410_WTCON); wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN); writel(wtcon, wdt_base + S3C2410_WTCON); + spin_unlock(&wdt_lock); +} - return 0; +static void __s3c2410wdt_stop(void) +{ + unsigned long wtcon; + + wtcon = readl(wdt_base + S3C2410_WTCON); + wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN); + writel(wtcon, wdt_base + S3C2410_WTCON); +} + +static void s3c2410wdt_stop(void) +{ + spin_lock(&wdt_lock); + __s3c2410wdt_stop(); + spin_unlock(&wdt_lock); } -static int s3c2410wdt_start(void) +static void s3c2410wdt_start(void) { unsigned long wtcon; - s3c2410wdt_stop(); + spin_lock(&wdt_lock); + + __s3c2410wdt_stop(); wtcon = readl(wdt_base + S3C2410_WTCON); wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128; @@ -149,6 +167,7 @@ static int s3c2410wdt_start(void) writel(wdt_count, wdt_base + S3C2410_WTDAT); writel(wdt_count, wdt_base + S3C2410_WTCNT); writel(wtcon, wdt_base + S3C2410_WTCON); + spin_unlock(&wdt_lock); return 0; } @@ -211,7 +230,7 @@ static int s3c2410wdt_set_heartbeat(int timeout) static int s3c2410wdt_open(struct inode *inode, struct file *file) { - if(down_trylock(&open_lock)) + if (test_and_set_bit(0, &open_lock)) return -EBUSY; if (nowayout) @@ -231,15 +250,14 @@ static int s3c2410wdt_release(struct inode *inode, struct file *file) * Lock it in if it's a module and we set nowayout */ - if (allow_close == CLOSE_STATE_ALLOW) { + if (allow_close == CLOSE_STATE_ALLOW) s3c2410wdt_stop(); - } else { + else { dev_err(wdt_dev, "Unexpected close, not stopping watchdog\n"); s3c2410wdt_keepalive(); } - allow_close = CLOSE_STATE_NOT; - up(&open_lock); + clear_bit(0, &open_lock); return 0; } @@ -249,7 +267,7 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data, /* * Refresh the timer. */ - if(len) { + if (len) { if (!nowayout) { size_t i; @@ -265,7 +283,6 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data, allow_close = CLOSE_STATE_ALLOW; } } - s3c2410wdt_keepalive(); } return len; @@ -273,48 +290,41 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data, #define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE -static struct watchdog_info s3c2410_wdt_ident = { +static const struct watchdog_info s3c2410_wdt_ident = { .options = OPTIONS, .firmware_version = 0, .identity = "S3C2410 Watchdog", }; -static int s3c2410wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long s3c2410wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; int new_margin; switch (cmd) { - default: - return -ENOTTY; - - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &s3c2410_wdt_ident, - sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_KEEPALIVE: - s3c2410wdt_keepalive(); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_margin, p)) - return -EFAULT; - - if (s3c2410wdt_set_heartbeat(new_margin)) - return -EINVAL; - - s3c2410wdt_keepalive(); - return put_user(tmr_margin, p); - - case WDIOC_GETTIMEOUT: - return put_user(tmr_margin, p); + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &s3c2410_wdt_ident, + sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + s3c2410wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, p)) + return -EFAULT; + if (s3c2410wdt_set_heartbeat(new_margin)) + return -EINVAL; + s3c2410wdt_keepalive(); + return put_user(tmr_margin, p); + case WDIOC_GETTIMEOUT: + return put_user(tmr_margin, p); } } @@ -324,7 +334,7 @@ static const struct file_operations s3c2410wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = s3c2410wdt_write, - .ioctl = s3c2410wdt_ioctl, + .unlocked_ioctl = s3c2410wdt_ioctl, .open = s3c2410wdt_open, .release = s3c2410wdt_release, }; @@ -411,14 +421,15 @@ static int s3c2410wdt_probe(struct platform_device *pdev) * not, try the default value */ if (s3c2410wdt_set_heartbeat(tmr_margin)) { - started = s3c2410wdt_set_heartbeat(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); + started = s3c2410wdt_set_heartbeat( + CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); - if (started == 0) { - dev_info(dev,"tmr_margin value out of range, default %d used\n", + if (started == 0) + dev_info(dev, + "tmr_margin value out of range, default %d used\n", CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); - } else { + else dev_info(dev, "default timer value is out of range, cannot start\n"); - } } ret = misc_register(&s3c2410wdt_miscdev); @@ -447,7 +458,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) (wtcon & S3C2410_WTCON_ENABLE) ? "" : "in", (wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis", (wtcon & S3C2410_WTCON_INTEN) ? "" : "en"); - + return 0; err_clk: @@ -487,7 +498,7 @@ static int s3c2410wdt_remove(struct platform_device *dev) static void s3c2410wdt_shutdown(struct platform_device *dev) { - s3c2410wdt_stop(); + s3c2410wdt_stop(); } #ifdef CONFIG_PM @@ -540,7 +551,8 @@ static struct platform_driver s3c2410wdt_driver = { }; -static char banner[] __initdata = KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n"; +static char banner[] __initdata = + KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n"; static int __init watchdog_init(void) { -- GitLab From f19e031265dc6e05511308a6ecb9637e335b45b0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:05 +0100 Subject: [PATCH 0042/1024] [WATCHDOG 36/57] sa1100_wdt: Switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sa1100_wdt.c | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-) diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index 34a2b3b8180..869d538c02f 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -26,13 +26,13 @@ #include #include #include +#include #ifdef CONFIG_ARCH_PXA #include #endif #include -#include #define OSCR_FREQ CLOCK_TICK_RATE @@ -45,7 +45,7 @@ static int boot_status; */ static int sa1100dog_open(struct inode *inode, struct file *file) { - if (test_and_set_bit(1,&sa1100wdt_users)) + if (test_and_set_bit(1, &sa1100wdt_users)) return -EBUSY; /* Activate SA1100 Watchdog timer */ @@ -66,28 +66,27 @@ static int sa1100dog_open(struct inode *inode, struct file *file) static int sa1100dog_release(struct inode *inode, struct file *file) { printk(KERN_CRIT "WATCHDOG: Device closed - timer will not stop\n"); - clear_bit(1, &sa1100wdt_users); - return 0; } -static ssize_t sa1100dog_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) +static ssize_t sa1100dog_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { if (len) /* Refresh OSMR3 timer. */ OSMR3 = OSCR + pre_margin; - return len; } -static struct watchdog_info ident = { - .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, +static const struct watchdog_info ident = { + .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT + | WDIOF_KEEPALIVEPING, .identity = "SA1100/PXA255 Watchdog", }; -static int sa1100dog_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long sa1100dog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int ret = -ENOTTY; int time; @@ -134,18 +133,16 @@ static int sa1100dog_ioctl(struct inode *inode, struct file *file, return ret; } -static const struct file_operations sa1100dog_fops = -{ +static const struct file_operations sa1100dog_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = sa1100dog_write, - .ioctl = sa1100dog_ioctl, + .unlocked_ioctl = sa1100dog_ioctl, .open = sa1100dog_open, .release = sa1100dog_release, }; -static struct miscdevice sa1100dog_miscdev = -{ +static struct miscdevice sa1100dog_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &sa1100dog_fops, @@ -167,8 +164,9 @@ static int __init sa1100dog_init(void) ret = misc_register(&sa1100dog_miscdev); if (ret == 0) - printk("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n", - margin); + printk(KERN_INFO + "SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n", + margin); return ret; } -- GitLab From 1780de41406d783aa57459ba636a09aeda21d180 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:11 +0100 Subject: [PATCH 0043/1024] [WATCHDOG 37/57] sbc60xxwdt: clean up and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sbc60xxwdt.c | 223 +++++++++++++++++----------------- 1 file changed, 110 insertions(+), 113 deletions(-) diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c index ef76f01625e..e284a5d4fb1 100644 --- a/drivers/watchdog/sbc60xxwdt.c +++ b/drivers/watchdog/sbc60xxwdt.c @@ -16,19 +16,23 @@ * * 12/4 - 2000 [Initial revision] * 25/4 - 2000 Added /dev/watchdog support - * 09/5 - 2001 [smj@oro.net] fixed fop_write to "return 1" on success + * 09/5 - 2001 [smj@oro.net] fixed fop_write to "return 1" + * on success * 12/4 - 2002 [rob@osinvestor.com] eliminate fop_read * fix possible wdt_is_open race * add CONFIG_WATCHDOG_NOWAYOUT support * remove lock_kernel/unlock_kernel pairs * added KERN_* to printk's * got rid of extraneous comments - * changed watchdog_info to correctly reflect what the driver offers - * added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS, WDIOC_SETTIMEOUT, - * WDIOC_GETTIMEOUT, and WDIOC_SETOPTIONS ioctls + * changed watchdog_info to correctly reflect what + * the driver offers + * added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS, + * WDIOC_SETTIMEOUT, WDIOC_GETTIMEOUT, and + * WDIOC_SETOPTIONS ioctls * 09/8 - 2003 [wim@iguana.be] cleanup of trailing spaces * use module_param - * made timeout (the emulated heartbeat) a module_param + * made timeout (the emulated heartbeat) a + * module_param * made the keepalive ping an internal subroutine * made wdt_stop and wdt_start module params * added extra printk's for startup problems @@ -56,9 +60,9 @@ #include #include #include +#include +#include -#include -#include #include #define OUR_NAME "sbc60xxwdt" @@ -94,13 +98,18 @@ MODULE_PARM_DESC(wdt_start, "SBC60xx WDT 'start' io port (default 0x443)"); */ #define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ -static int timeout = WATCHDOG_TIMEOUT; /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +static int timeout = WATCHDOG_TIMEOUT; /* in seconds, multiplied by HZ to + get seconds to wait for a ping */ module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<=timeout<=3600, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static void wdt_timer_ping(unsigned long); static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0); @@ -117,15 +126,14 @@ static void wdt_timer_ping(unsigned long data) /* If we got a heartbeat pulse within the WDT_US_INTERVAL * we agree to ping the WDT */ - if(time_before(jiffies, next_heartbeat)) - { + if (time_before(jiffies, next_heartbeat)) { /* Ping the WDT by reading from wdt_start */ inb_p(wdt_start); /* Re-set the timer interval */ mod_timer(&timer, jiffies + WDT_INTERVAL); - } else { - printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); - } + } else + printk(KERN_WARNING PFX + "Heartbeat lost! Will not ping the watchdog\n"); } /* @@ -159,40 +167,40 @@ static void wdt_keepalive(void) * /dev/watchdog handling */ -static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos) +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ - if(count) - { - if (!nowayout) - { + if (count) { + if (!nowayout) { size_t ofs; - /* note: just in case someone wrote the magic character - * five months ago... */ + /* note: just in case someone wrote the + magic character five months ago... */ wdt_expect_close = 0; - /* scan to see whether or not we got the magic character */ - for(ofs = 0; ofs != count; ofs++) - { + /* scan to see whether or not we got the + magic character */ + for (ofs = 0; ofs != count; ofs++) { char c; - if(get_user(c, buf+ofs)) + if (get_user(c, buf+ofs)) return -EFAULT; - if(c == 'V') + if (c == 'V') wdt_expect_close = 42; } } - /* Well, anyhow someone wrote to us, we should return that favour */ + /* Well, anyhow someone wrote to us, we should + return that favour */ wdt_keepalive(); } return count; } -static int fop_open(struct inode * inode, struct file * file) +static int fop_open(struct inode *inode, struct file *file) { /* Just in case we're already talking to someone... */ - if(test_and_set_bit(0, &wdt_is_open)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; if (nowayout) @@ -203,78 +211,72 @@ static int fop_open(struct inode * inode, struct file * file) return nonseekable_open(inode, file); } -static int fop_close(struct inode * inode, struct file * file) +static int fop_close(struct inode *inode, struct file *file) { - if(wdt_expect_close == 42) + if (wdt_expect_close == 42) wdt_turnoff(); else { del_timer(&timer); - printk(KERN_CRIT PFX "device file closed unexpectedly. Will not stop the WDT!\n"); + printk(KERN_CRIT PFX + "device file closed unexpectedly. Will not stop the WDT!\n"); } clear_bit(0, &wdt_is_open); wdt_expect_close = 0; return 0; } -static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident= - { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "SBC60xx", }; - switch(cmd) + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident))? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETOPTIONS: { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; - case WDIOC_SETOPTIONS: - { - int new_options, retval = -EINVAL; - - if(get_user(new_options, p)) - return -EFAULT; - - if(new_options & WDIOS_DISABLECARD) { - wdt_turnoff(); - retval = 0; - } - - if(new_options & WDIOS_ENABLECARD) { - wdt_startup(); - retval = 0; - } - - return retval; + int new_options, retval = -EINVAL; + if (get_user(new_options, p)) + return -EFAULT; + if (new_options & WDIOS_DISABLECARD) { + wdt_turnoff(); + retval = 0; } - case WDIOC_SETTIMEOUT: - { - int new_timeout; - - if(get_user(new_timeout, p)) - return -EFAULT; - - if(new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */ - return -EINVAL; - - timeout = new_timeout; - wdt_keepalive(); - /* Fall through */ + if (new_options & WDIOS_ENABLECARD) { + wdt_startup(); + retval = 0; } - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); + return retval; + } + case WDIOC_SETTIMEOUT: + { + int new_timeout; + if (get_user(new_timeout, p)) + return -EFAULT; + /* arbitrary upper limit */ + if (new_timeout < 1 || new_timeout > 3600) + return -EINVAL; + + timeout = new_timeout; + wdt_keepalive(); + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); } } @@ -284,7 +286,7 @@ static const struct file_operations wdt_fops = { .write = fop_write, .open = fop_open, .release = fop_close, - .ioctl = fop_ioctl, + .unlocked_ioctl = fop_ioctl, }; static struct miscdevice wdt_miscdev = { @@ -300,7 +302,7 @@ static struct miscdevice wdt_miscdev = { static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if(code==SYS_DOWN || code==SYS_HALT) + if (code == SYS_DOWN || code == SYS_HALT) wdt_turnoff(); return NOTIFY_DONE; } @@ -310,8 +312,7 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code, * turn the timebomb registers off. */ -static struct notifier_block wdt_notifier= -{ +static struct notifier_block wdt_notifier = { .notifier_call = wdt_notify_sys, }; @@ -324,23 +325,22 @@ static void __exit sbc60xxwdt_unload(void) unregister_reboot_notifier(&wdt_notifier); if ((wdt_stop != 0x45) && (wdt_stop != wdt_start)) - release_region(wdt_stop,1); - release_region(wdt_start,1); + release_region(wdt_stop, 1); + release_region(wdt_start, 1); } static int __init sbc60xxwdt_init(void) { int rc = -EBUSY; - if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */ - { + if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */ timeout = WATCHDOG_TIMEOUT; - printk(KERN_INFO PFX "timeout value must be 1<=x<=3600, using %d\n", - timeout); - } + printk(KERN_INFO PFX + "timeout value must be 1 <= x <= 3600, using %d\n", + timeout); + } - if (!request_region(wdt_start, 1, "SBC 60XX WDT")) - { + if (!request_region(wdt_start, 1, "SBC 60XX WDT")) { printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", wdt_start); rc = -EIO; @@ -348,33 +348,30 @@ static int __init sbc60xxwdt_init(void) } /* We cannot reserve 0x45 - the kernel already has! */ - if ((wdt_stop != 0x45) && (wdt_stop != wdt_start)) - { - if (!request_region(wdt_stop, 1, "SBC 60XX WDT")) - { - printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_stop); + if (wdt_stop != 0x45 && wdt_stop != wdt_start) { + if (!request_region(wdt_stop, 1, "SBC 60XX WDT")) { + printk(KERN_ERR PFX + "I/O address 0x%04x already in use\n", + wdt_stop); rc = -EIO; goto err_out_region1; } } rc = register_reboot_notifier(&wdt_notifier); - if (rc) - { - printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - rc); + if (rc) { + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", rc); goto err_out_region2; } rc = misc_register(&wdt_miscdev); - if (rc) - { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - wdt_miscdev.minor, rc); + if (rc) { + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); goto err_out_reboot; } - printk(KERN_INFO PFX "WDT driver for 60XX single board computer initialised. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); @@ -383,10 +380,10 @@ static int __init sbc60xxwdt_init(void) err_out_reboot: unregister_reboot_notifier(&wdt_notifier); err_out_region2: - if ((wdt_stop != 0x45) && (wdt_stop != wdt_start)) - release_region(wdt_stop,1); + if (wdt_stop != 0x45 && wdt_stop != wdt_start) + release_region(wdt_stop, 1); err_out_region1: - release_region(wdt_start,1); + release_region(wdt_start, 1); err_out: return rc; } -- GitLab From 619a8a2bb1d0c3f8270da4496a30f1e83e6eab5e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:16 +0100 Subject: [PATCH 0044/1024] [WATCHDOG 38/57] stg7240_wdt: unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sbc7240_wdt.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c index 4c8cefbd862..abccbe26524 100644 --- a/drivers/watchdog/sbc7240_wdt.c +++ b/drivers/watchdog/sbc7240_wdt.c @@ -27,10 +27,10 @@ #include #include #include +#include +#include #include -#include #include -#include #define SBC7240_PREFIX "sbc7240_wdt: " @@ -159,7 +159,7 @@ static int fop_close(struct inode *inode, struct file *file) return 0; } -static struct watchdog_info ident = { +static const struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING| WDIOF_SETTIMEOUT| WDIOF_MAGICCLOSE, @@ -168,14 +168,12 @@ static struct watchdog_info ident = { }; -static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { switch (cmd) { case WDIOC_GETSUPPORT: - return copy_to_user - ((void __user *)arg, &ident, sizeof(ident)) - ? -EFAULT : 0; + return copy_to_user((void __user *)arg, &ident, sizeof(ident)) + ? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, (int __user *)arg); @@ -225,7 +223,7 @@ static const struct file_operations wdt_fops = { .write = fop_write, .open = fop_open, .release = fop_close, - .ioctl = fop_ioctl, + .unlocked_ioctl = fop_ioctl, }; static struct miscdevice wdt_miscdev = { -- GitLab From 9f53c8de1aef08cad678dcda0f85fd8914ad7666 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:22 +0100 Subject: [PATCH 0045/1024] [WATCHDOG 39/57] sbc8360: clean up Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sbc8360.c | 30 ++++++++++++------------------ 1 file changed, 12 insertions(+), 18 deletions(-) diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c index 2ee2677f364..c66fa6694fc 100644 --- a/drivers/watchdog/sbc8360.c +++ b/drivers/watchdog/sbc8360.c @@ -48,13 +48,12 @@ #include #include #include +#include +#include -#include -#include #include static unsigned long sbc8360_is_open; -static DEFINE_SPINLOCK(sbc8360_lock); static char expect_close; #define PFX "sbc8360: " @@ -204,7 +203,8 @@ module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "Index into timeout table (0-63) (default=27 (60s))"); module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, - "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Kernel methods. @@ -232,8 +232,8 @@ static void sbc8360_ping(void) } /* Userspace pings kernel driver, or requests clean close */ -static ssize_t sbc8360_write(struct file *file, const char __user * buf, - size_t count, loff_t * ppos) +static ssize_t sbc8360_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { @@ -257,16 +257,12 @@ static ssize_t sbc8360_write(struct file *file, const char __user * buf, static int sbc8360_open(struct inode *inode, struct file *file) { - spin_lock(&sbc8360_lock); - if (test_and_set_bit(0, &sbc8360_is_open)) { - spin_unlock(&sbc8360_lock); + if (test_and_set_bit(0, &sbc8360_is_open)) return -EBUSY; - } if (nowayout) __module_get(THIS_MODULE); /* Activate and ping once to start the countdown */ - spin_unlock(&sbc8360_lock); sbc8360_activate(); sbc8360_ping(); return nonseekable_open(inode, file); @@ -274,16 +270,14 @@ static int sbc8360_open(struct inode *inode, struct file *file) static int sbc8360_close(struct inode *inode, struct file *file) { - spin_lock(&sbc8360_lock); if (expect_close == 42) outb(0, SBC8360_ENABLE); else printk(KERN_CRIT PFX - "SBC8360 device closed unexpectedly. SBC8360 will not stop!\n"); + "SBC8360 device closed unexpectedly. SBC8360 will not stop!\n"); clear_bit(0, &sbc8360_is_open); expect_close = 0; - spin_unlock(&sbc8360_lock); return 0; } @@ -382,13 +376,13 @@ static int __init sbc8360_init(void) return 0; - out_nomisc: +out_nomisc: unregister_reboot_notifier(&sbc8360_notifier); - out_noreboot: +out_noreboot: release_region(SBC8360_BASETIME, 1); - out_nobasetimereg: +out_nobasetimereg: release_region(SBC8360_ENABLE, 1); - out: +out: return res; } -- GitLab From f4f6f65a554d4a11e544070c39eea7c2ecc3ebfb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:27 +0100 Subject: [PATCH 0046/1024] [WATCHDOG 40/57] sbc_epx_c3_wdt: switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sbc_epx_c3.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c index 82cbd8809a6..70ff9cbc8e9 100644 --- a/drivers/watchdog/sbc_epx_c3.c +++ b/drivers/watchdog/sbc_epx_c3.c @@ -25,8 +25,8 @@ #include #include #include -#include -#include +#include +#include #define PFX "epx_c3: " static int epx_c3_alive; @@ -100,12 +100,12 @@ static ssize_t epx_c3_write(struct file *file, const char __user *data, return len; } -static int epx_c3_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long epx_c3_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int options, retval = -EINVAL; int __user *argp = (void __user *)arg; - static struct watchdog_info ident = { + static const struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, .firmware_version = 0, @@ -158,7 +158,7 @@ static const struct file_operations epx_c3_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = epx_c3_write, - .ioctl = epx_c3_ioctl, + .unlocked_ioctl = epx_c3_ioctl, .open = epx_c3_open, .release = epx_c3_release, }; -- GitLab From df3c9de3dee539c6b18a9c0797b37f6cb90c6ccb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:33 +0100 Subject: [PATCH 0047/1024] [WATCHDOG 41/57] sb_wdog: Clean up and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sb_wdog.c | 78 +++++++++++++++++++------------------- 1 file changed, 40 insertions(+), 38 deletions(-) diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c index b9443143369..c8b544ce77f 100644 --- a/drivers/watchdog/sb_wdog.c +++ b/drivers/watchdog/sb_wdog.c @@ -57,6 +57,7 @@ #include #include +static DEFINE_SPINLOCK(sbwd_lock); /* * set the initial count value of a timer @@ -65,8 +66,10 @@ */ void sbwdog_set(char __iomem *wdog, unsigned long t) { + spin_lock(&sbwd_lock); __raw_writeb(0, wdog - 0x10); __raw_writeq(t & 0x7fffffUL, wdog); + spin_unlock(&sbwd_lock); } /* @@ -77,7 +80,9 @@ void sbwdog_set(char __iomem *wdog, unsigned long t) */ void sbwdog_pet(char __iomem *wdog) { + spin_lock(&sbwd_lock); __raw_writeb(__raw_readb(wdog) | 1, wdog); + spin_unlock(&sbwd_lock); } static unsigned long sbwdog_gate; /* keeps it to one thread only */ @@ -86,8 +91,9 @@ static char __iomem *user_dog = (char __iomem *)(IO_BASE + (A_SCD_WDOG_CFG_1)); static unsigned long timeout = 0x7fffffUL; /* useconds: 8.3ish secs. */ static int expect_close; -static struct watchdog_info ident = { - .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, +static const struct watchdog_info ident = { + .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | + WDIOF_KEEPALIVEPING, .identity = "SiByte Watchdog", }; @@ -97,9 +103,8 @@ static struct watchdog_info ident = { static int sbwdog_open(struct inode *inode, struct file *file) { nonseekable_open(inode, file); - if (test_and_set_bit(0, &sbwdog_gate)) { + if (test_and_set_bit(0, &sbwdog_gate)) return -EBUSY; - } __module_get(THIS_MODULE); /* @@ -120,8 +125,9 @@ static int sbwdog_release(struct inode *inode, struct file *file) __raw_writeb(0, user_dog); module_put(THIS_MODULE); } else { - printk(KERN_CRIT "%s: Unexpected close, not stopping watchdog!\n", - ident.identity); + printk(KERN_CRIT + "%s: Unexpected close, not stopping watchdog!\n", + ident.identity); sbwdog_pet(user_dog); } clear_bit(0, &sbwdog_gate); @@ -147,12 +153,10 @@ static ssize_t sbwdog_write(struct file *file, const char __user *data, for (i = 0; i != len; i++) { char c; - if (get_user(c, data + i)) { + if (get_user(c, data + i)) return -EFAULT; - } - if (c == 'V') { + if (c == 'V') expect_close = 42; - } } sbwdog_pet(user_dog); } @@ -160,8 +164,8 @@ static ssize_t sbwdog_write(struct file *file, const char __user *data, return len; } -static int sbwdog_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long sbwdog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int ret = -ENOTTY; unsigned long time; @@ -180,9 +184,8 @@ static int sbwdog_ioctl(struct inode *inode, struct file *file, case WDIOC_SETTIMEOUT: ret = get_user(time, p); - if (ret) { + if (ret) break; - } time *= 1000000; if (time > 0x7fffffUL) { @@ -226,18 +229,16 @@ sbwdog_notify_sys(struct notifier_block *this, unsigned long code, void *erf) return NOTIFY_DONE; } -static const struct file_operations sbwdog_fops = -{ +static const struct file_operations sbwdog_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = sbwdog_write, - .ioctl = sbwdog_ioctl, + .unlocked_ioctl = sbwdog_ioctl, .open = sbwdog_open, .release = sbwdog_release, }; -static struct miscdevice sbwdog_miscdev = -{ +static struct miscdevice sbwdog_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &sbwdog_fops, @@ -267,13 +268,12 @@ irqreturn_t sbwdog_interrupt(int irq, void *addr) /* * if it's the second watchdog timer, it's for those users */ - if (wd_cfg_reg == user_dog) { + if (wd_cfg_reg == user_dog) printk(KERN_CRIT "%s in danger of initiating system reset in %ld.%01ld seconds\n", ident.identity, wd_init / 1000000, (wd_init / 100000) % 10); - } else { + else cfg |= 1; - } __raw_writeb(cfg, wd_cfg_reg); @@ -289,28 +289,31 @@ static int __init sbwdog_init(void) */ ret = register_reboot_notifier(&sbwdog_notifier); if (ret) { - printk (KERN_ERR "%s: cannot register reboot notifier (err=%d)\n", - ident.identity, ret); + printk(KERN_ERR + "%s: cannot register reboot notifier (err=%d)\n", + ident.identity, ret); return ret; } /* * get the resources */ - ret = misc_register(&sbwdog_miscdev); - if (ret == 0) { - printk(KERN_INFO "%s: timeout is %ld.%ld secs\n", ident.identity, - timeout / 1000000, (timeout / 100000) % 10); - } ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED, ident.identity, (void *)user_dog); if (ret) { - printk(KERN_ERR "%s: failed to request irq 1 - %d\n", ident.identity, - ret); - misc_deregister(&sbwdog_miscdev); + printk(KERN_ERR "%s: failed to request irq 1 - %d\n", + ident.identity, ret); + return ret; } + ret = misc_register(&sbwdog_miscdev); + if (ret == 0) { + printk(KERN_INFO "%s: timeout is %ld.%ld secs\n", + ident.identity, + timeout / 1000000, (timeout / 100000) % 10); + } else + free_irq(1, (void *)user_dog); return ret; } @@ -327,7 +330,7 @@ MODULE_DESCRIPTION("SiByte Watchdog"); module_param(timeout, ulong, 0); MODULE_PARM_DESC(timeout, - "Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)"); + "Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs)"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); @@ -336,16 +339,15 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); * example code that can be put in a platform code area to utilize the * first watchdog timer for the kernels own purpose. - void -platform_wd_setup(void) +void platform_wd_setup(void) { int ret; - ret = request_irq(0, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED, + ret = request_irq(1, sbwdog_interrupt, IRQF_DISABLED | IRQF_SHARED, "Kernel Watchdog", IOADDR(A_SCD_WDOG_CFG_0)); if (ret) { - printk(KERN_CRIT "Watchdog IRQ zero(0) failed to be requested - %d\n", - ret); + printk(KERN_CRIT + "Watchdog IRQ zero(0) failed to be requested - %d\n", ret); } } -- GitLab From d14bccaadaa49b651fabcd1298b6ea07db3af552 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:38 +0100 Subject: [PATCH 0048/1024] [WATCHDOG 42/57] sc1200_wdt: clean up, fix locking and use unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sc1200wdt.c | 203 ++++++++++++++++++++--------------- 1 file changed, 114 insertions(+), 89 deletions(-) diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index 35cddff7020..7e5c9cc97de 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -15,14 +15,18 @@ * * Changelog: * 20020220 Zwane Mwaikambo Code based on datasheet, no hardware. - * 20020221 Zwane Mwaikambo Cleanups as suggested by Jeff Garzik and Alan Cox. + * 20020221 Zwane Mwaikambo Cleanups as suggested by Jeff Garzik + * and Alan Cox. * 20020222 Zwane Mwaikambo Added probing. * 20020225 Zwane Mwaikambo Added ISAPNP support. * 20020412 Rob Radez Broke out start/stop functions - * Return proper status instead of temperature warning - * Add WDIOC_GETBOOTSTATUS and WDIOC_SETOPTIONS ioctls + * Return proper status instead of + * temperature warning + * Add WDIOC_GETBOOTSTATUS and + * WDIOC_SETOPTIONS ioctls * Fix CONFIG_WATCHDOG_NOWAYOUT - * 20020530 Joel Becker Add Matt Domsch's nowayout module option + * 20020530 Joel Becker Add Matt Domsch's nowayout module + * option * 20030116 Adam Belay Updated to the latest pnp code * */ @@ -39,9 +43,8 @@ #include #include #include - -#include -#include +#include +#include #define SC1200_MODULE_VER "build 20020303" #define SC1200_MODULE_NAME "sc1200wdt" @@ -72,7 +75,7 @@ static char banner[] __initdata = KERN_INFO PFX SC1200_MODULE_VER; static int timeout = 1; static int io = -1; static int io_len = 2; /* for non plug and play */ -static struct semaphore open_sem; +static unsigned long open_flag; static char expect_close; static DEFINE_SPINLOCK(sc1200wdt_lock); /* io port access serialisation */ @@ -81,7 +84,8 @@ static int isapnp = 1; static struct pnp_dev *wdt_dev; module_param(isapnp, int, 0); -MODULE_PARM_DESC(isapnp, "When set to 0 driver ISA PnP support will be disabled"); +MODULE_PARM_DESC(isapnp, + "When set to 0 driver ISA PnP support will be disabled"); #endif module_param(io, int, 0); @@ -91,26 +95,40 @@ MODULE_PARM_DESC(timeout, "range is 0-255 minutes, default is 1"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* Read from Data Register */ -static inline void sc1200wdt_read_data(unsigned char index, unsigned char *data) +static inline void __sc1200wdt_read_data(unsigned char index, + unsigned char *data) { - spin_lock(&sc1200wdt_lock); outb_p(index, PMIR); *data = inb(PMDR); - spin_unlock(&sc1200wdt_lock); } +static void sc1200wdt_read_data(unsigned char index, unsigned char *data) +{ + spin_lock(&sc1200wdt_lock); + __sc1200wdt_read_data(index, data); + spin_unlock(&sc1200wdt_lock); +} /* Write to Data Register */ -static inline void sc1200wdt_write_data(unsigned char index, unsigned char data) +static inline void __sc1200wdt_write_data(unsigned char index, + unsigned char data) { - spin_lock(&sc1200wdt_lock); outb_p(index, PMIR); outb(data, PMDR); +} + +static inline void sc1200wdt_write_data(unsigned char index, + unsigned char data) +{ + spin_lock(&sc1200wdt_lock); + __sc1200wdt_write_data(index, data); spin_unlock(&sc1200wdt_lock); } @@ -118,13 +136,16 @@ static inline void sc1200wdt_write_data(unsigned char index, unsigned char data) static void sc1200wdt_start(void) { unsigned char reg; + spin_lock(&sc1200wdt_lock); - sc1200wdt_read_data(WDCF, ®); + __sc1200wdt_read_data(WDCF, ®); /* assert WDO when any of the following interrupts are triggered too */ reg |= (KBC_IRQ | MSE_IRQ | UART1_IRQ | UART2_IRQ); - sc1200wdt_write_data(WDCF, reg); + __sc1200wdt_write_data(WDCF, reg); /* set the timeout and get the ball rolling */ - sc1200wdt_write_data(WDTO, timeout); + __sc1200wdt_write_data(WDTO, timeout); + + spin_unlock(&sc1200wdt_lock); } @@ -144,14 +165,15 @@ static inline int sc1200wdt_status(void) * KEEPALIVEPING which is a bit of a kludge because there's nothing * else for enabled/disabled status */ - return (ret & 0x01) ? 0 : WDIOF_KEEPALIVEPING; /* bits 1 - 7 are undefined */ + return (ret & 0x01) ? 0 : WDIOF_KEEPALIVEPING; + /* bits 1 - 7 are undefined */ } static int sc1200wdt_open(struct inode *inode, struct file *file) { /* allow one at a time */ - if (down_trylock(&open_sem)) + if (test_and_set_bit(0, &open_flag)) return -EBUSY; if (timeout > MAX_TIMEOUT) @@ -164,71 +186,71 @@ static int sc1200wdt_open(struct inode *inode, struct file *file) } -static int sc1200wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long sc1200wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_timeout; void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, .firmware_version = 0, .identity = "PC87307/PC97307", }; switch (cmd) { - default: - return -ENOTTY; - - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof ident)) - return -EFAULT; - return 0; - case WDIOC_GETSTATUS: - return put_user(sc1200wdt_status(), p); + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof ident)) + return -EFAULT; + return 0; - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + case WDIOC_GETSTATUS: + return put_user(sc1200wdt_status(), p); - case WDIOC_KEEPALIVE: - sc1200wdt_write_data(WDTO, timeout); - return 0; + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - - /* the API states this is given in secs */ - new_timeout /= 60; - if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) - return -EINVAL; - - timeout = new_timeout; - sc1200wdt_write_data(WDTO, timeout); - /* fall through and return the new timeout */ - - case WDIOC_GETTIMEOUT: - return put_user(timeout * 60, p); + case WDIOC_KEEPALIVE: + sc1200wdt_write_data(WDTO, timeout); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + /* the API states this is given in secs */ + new_timeout /= 60; + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + timeout = new_timeout; + sc1200wdt_write_data(WDTO, timeout); + /* fall through and return the new timeout */ - case WDIOC_SETOPTIONS: - { - int options, retval = -EINVAL; + case WDIOC_GETTIMEOUT: + return put_user(timeout * 60, p); - if (get_user(options, p)) - return -EFAULT; + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; - if (options & WDIOS_DISABLECARD) { - sc1200wdt_stop(); - retval = 0; - } + if (get_user(options, p)) + return -EFAULT; - if (options & WDIOS_ENABLECARD) { - sc1200wdt_start(); - retval = 0; - } + if (options & WDIOS_DISABLECARD) { + sc1200wdt_stop(); + retval = 0; + } - return retval; + if (options & WDIOS_ENABLECARD) { + sc1200wdt_start(); + retval = 0; } + + return retval; + } + default: + return -ENOTTY; } } @@ -240,16 +262,18 @@ static int sc1200wdt_release(struct inode *inode, struct file *file) printk(KERN_INFO PFX "Watchdog disabled\n"); } else { sc1200wdt_write_data(WDTO, timeout); - printk(KERN_CRIT PFX "Unexpected close!, timeout = %d min(s)\n", timeout); + printk(KERN_CRIT PFX + "Unexpected close!, timeout = %d min(s)\n", timeout); } - up(&open_sem); + clear_bit(0, &open_flag); expect_close = 0; return 0; } -static ssize_t sc1200wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) +static ssize_t sc1200wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { if (len) { if (!nowayout) { @@ -275,7 +299,8 @@ static ssize_t sc1200wdt_write(struct file *file, const char __user *data, size_ } -static int sc1200wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +static int sc1200wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) { if (code == SYS_DOWN || code == SYS_HALT) sc1200wdt_stop(); @@ -284,23 +309,20 @@ static int sc1200wdt_notify_sys(struct notifier_block *this, unsigned long code, } -static struct notifier_block sc1200wdt_notifier = -{ +static struct notifier_block sc1200wdt_notifier = { .notifier_call = sc1200wdt_notify_sys, }; -static const struct file_operations sc1200wdt_fops = -{ +static const struct file_operations sc1200wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = sc1200wdt_write, - .ioctl = sc1200wdt_ioctl, + .unlocked_ioctl = sc1200wdt_ioctl, .open = sc1200wdt_open, .release = sc1200wdt_release, }; -static struct miscdevice sc1200wdt_miscdev = -{ +static struct miscdevice sc1200wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &sc1200wdt_fops, @@ -312,14 +334,14 @@ static int __init sc1200wdt_probe(void) /* The probe works by reading the PMC3 register's default value of 0x0e * there is one caveat, if the device disables the parallel port or any * of the UARTs we won't be able to detect it. - * Nb. This could be done with accuracy by reading the SID registers, but - * we don't have access to those io regions. + * NB. This could be done with accuracy by reading the SID registers, + * but we don't have access to those io regions. */ unsigned char reg; sc1200wdt_read_data(PMC3, ®); - reg &= 0x0f; /* we don't want the UART busy bits */ + reg &= 0x0f; /* we don't want the UART busy bits */ return (reg == 0x0e) ? 0 : -ENODEV; } @@ -332,7 +354,8 @@ static struct pnp_device_id scl200wdt_pnp_devices[] = { {.id = ""}, }; -static int scl200wdt_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id) +static int scl200wdt_pnp_probe(struct pnp_dev *dev, + const struct pnp_device_id *dev_id) { /* this driver only supports one card at a time */ if (wdt_dev || !isapnp) @@ -347,13 +370,14 @@ static int scl200wdt_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id return -EBUSY; } - printk(KERN_INFO "scl200wdt: PnP device found at io port %#x/%d\n", io, io_len); + printk(KERN_INFO "scl200wdt: PnP device found at io port %#x/%d\n", + io, io_len); return 0; } -static void scl200wdt_pnp_remove(struct pnp_dev * dev) +static void scl200wdt_pnp_remove(struct pnp_dev *dev) { - if (wdt_dev){ + if (wdt_dev) { release_region(io, io_len); wdt_dev = NULL; } @@ -375,8 +399,6 @@ static int __init sc1200wdt_init(void) printk("%s\n", banner); - sema_init(&open_sem, 1); - #if defined CONFIG_PNP if (isapnp) { ret = pnp_register_driver(&scl200wdt_pnp_driver); @@ -410,13 +432,16 @@ static int __init sc1200wdt_init(void) ret = register_reboot_notifier(&sc1200wdt_notifier); if (ret) { - printk(KERN_ERR PFX "Unable to register reboot notifier err = %d\n", ret); + printk(KERN_ERR PFX + "Unable to register reboot notifier err = %d\n", ret); goto out_io; } ret = misc_register(&sc1200wdt_miscdev); if (ret) { - printk(KERN_ERR PFX "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR); + printk(KERN_ERR PFX + "Unable to register miscdev on minor %d\n", + WATCHDOG_MINOR); goto out_rbt; } @@ -446,7 +471,7 @@ static void __exit sc1200wdt_exit(void) unregister_reboot_notifier(&sc1200wdt_notifier); #if defined CONFIG_PNP - if(isapnp) + if (isapnp) pnp_unregister_driver(&scl200wdt_pnp_driver); else #endif -- GitLab From ff94806057fba557abd6295f7313f5f9e972a48f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:44 +0100 Subject: [PATCH 0049/1024] [WATCHDOG 43/57] sc520_wdt: Clean up and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sc520_wdt.c | 161 +++++++++++++++++++---------------- 1 file changed, 86 insertions(+), 75 deletions(-) diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c index 2847324a2be..525555a8779 100644 --- a/drivers/watchdog/sc520_wdt.c +++ b/drivers/watchdog/sc520_wdt.c @@ -64,9 +64,9 @@ #include #include #include +#include +#include -#include -#include #include #define OUR_NAME "sc520_wdt" @@ -91,13 +91,18 @@ */ #define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ -static int timeout = WATCHDOG_TIMEOUT; /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +static int timeout = WATCHDOG_TIMEOUT; module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1 <= timeout <= 3600, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * AMD Elan SC520 - Watchdog Timer Registers @@ -136,8 +141,7 @@ static void wdt_timer_ping(unsigned long data) /* If we got a heartbeat pulse within the WDT_US_INTERVAL * we agree to ping the WDT */ - if(time_before(jiffies, next_heartbeat)) - { + if (time_before(jiffies, next_heartbeat)) { /* Ping the WDT */ spin_lock(&wdt_spinlock); writew(0xAAAA, wdtmrctl); @@ -146,9 +150,9 @@ static void wdt_timer_ping(unsigned long data) /* Re-set the timer interval */ mod_timer(&timer, jiffies + WDT_INTERVAL); - } else { - printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); - } + } else + printk(KERN_WARNING PFX + "Heartbeat lost! Will not ping the watchdog\n"); } /* @@ -162,7 +166,7 @@ static void wdt_config(int writeval) /* buy some time (ping) */ spin_lock_irqsave(&wdt_spinlock, flags); - dummy=readw(wdtmrctl); /* ensure write synchronization */ + dummy = readw(wdtmrctl); /* ensure write synchronization */ writew(0xAAAA, wdtmrctl); writew(0x5555, wdtmrctl); /* unlock WDT = make WDT configuration register writable one time */ @@ -219,10 +223,11 @@ static int wdt_set_heartbeat(int t) * /dev/watchdog handling */ -static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos) +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ - if(count) { + if (count) { if (!nowayout) { size_t ofs; @@ -231,25 +236,26 @@ static ssize_t fop_write(struct file * file, const char __user * buf, size_t cou wdt_expect_close = 0; /* now scan */ - for(ofs = 0; ofs != count; ofs++) { + for (ofs = 0; ofs != count; ofs++) { char c; if (get_user(c, buf + ofs)) return -EFAULT; - if(c == 'V') + if (c == 'V') wdt_expect_close = 42; } } - /* Well, anyhow someone wrote to us, we should return that favour */ + /* Well, anyhow someone wrote to us, we should + return that favour */ wdt_keepalive(); } return count; } -static int fop_open(struct inode * inode, struct file * file) +static int fop_open(struct inode *inode, struct file *file) { /* Just in case we're already talking to someone... */ - if(test_and_set_bit(0, &wdt_is_open)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; if (nowayout) __module_get(THIS_MODULE); @@ -259,12 +265,13 @@ static int fop_open(struct inode * inode, struct file * file) return nonseekable_open(inode, file); } -static int fop_close(struct inode * inode, struct file * file) +static int fop_close(struct inode *inode, struct file *file) { - if(wdt_expect_close == 42) { + if (wdt_expect_close == 42) wdt_turnoff(); - } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + else { + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); wdt_keepalive(); } clear_bit(0, &wdt_is_open); @@ -272,63 +279,63 @@ static int fop_close(struct inode * inode, struct file * file) return 0; } -static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static int fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "SC520", }; - switch(cmd) + switch (cmd) { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; - case WDIOC_SETOPTIONS: - { - int new_options, retval = -EINVAL; - - if(get_user(new_options, p)) - return -EFAULT; - - if(new_options & WDIOS_DISABLECARD) { - wdt_turnoff(); - retval = 0; - } + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; - if(new_options & WDIOS_ENABLECARD) { - wdt_startup(); - retval = 0; - } + if (get_user(new_options, p)) + return -EFAULT; + + if (new_options & WDIOS_DISABLECARD) { + wdt_turnoff(); + retval = 0; + } - return retval; + if (new_options & WDIOS_ENABLECARD) { + wdt_startup(); + retval = 0; } - case WDIOC_SETTIMEOUT: - { - int new_timeout; - if(get_user(new_timeout, p)) - return -EFAULT; + return retval; + } + case WDIOC_SETTIMEOUT: + { + int new_timeout; - if(wdt_set_heartbeat(new_timeout)) - return -EINVAL; + if (get_user(new_timeout, p)) + return -EFAULT; - wdt_keepalive(); - /* Fall through */ - } - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); + if (wdt_set_heartbeat(new_timeout)) + return -EINVAL; + + wdt_keepalive(); + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); } } @@ -354,7 +361,7 @@ static struct miscdevice wdt_miscdev = { static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if(code==SYS_DOWN || code==SYS_HALT) + if (code == SYS_DOWN || code == SYS_HALT) wdt_turnoff(); return NOTIFY_DONE; } @@ -383,11 +390,13 @@ static int __init sc520_wdt_init(void) { int rc = -EBUSY; - /* Check that the timeout value is within it's range ; if not reset to the default */ + /* Check that the timeout value is within it's range ; + if not reset to the default */ if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk(KERN_INFO PFX "timeout value must be 1<=timeout<=3600, using %d\n", - WATCHDOG_TIMEOUT); + printk(KERN_INFO PFX + "timeout value must be 1 <= timeout <= 3600, using %d\n", + WATCHDOG_TIMEOUT); } wdtmrctl = ioremap((unsigned long)(MMCR_BASE + OFFS_WDTMRCTL), 2); @@ -399,20 +408,22 @@ static int __init sc520_wdt_init(void) rc = register_reboot_notifier(&wdt_notifier); if (rc) { - printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - rc); + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", rc); goto err_out_ioremap; } rc = misc_register(&wdt_miscdev); if (rc) { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, rc); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, rc); goto err_out_notifier; } - printk(KERN_INFO PFX "WDT driver for SC520 initialised. timeout=%d sec (nowayout=%d)\n", - timeout,nowayout); + printk(KERN_INFO PFX + "WDT driver for SC520 initialised. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); return 0; -- GitLab From 9b748ed03cabf533a815e5ffc50108a21c98e40c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:49 +0100 Subject: [PATCH 0050/1024] [WATCHDOG 44/57] scx200_wdt: clean up and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sc520_wdt.c | 4 +-- drivers/watchdog/scx200_wdt.c | 59 ++++++++++++++++++----------------- 2 files changed, 32 insertions(+), 31 deletions(-) diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c index 525555a8779..01de239f49e 100644 --- a/drivers/watchdog/sc520_wdt.c +++ b/drivers/watchdog/sc520_wdt.c @@ -279,7 +279,7 @@ static int fop_close(struct inode *inode, struct file *file) return 0; } -static int fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -345,7 +345,7 @@ static const struct file_operations wdt_fops = { .write = fop_write, .open = fop_open, .release = fop_close, - .ioctl = fop_ioctl, + .unlocked_ioctl = fop_ioctl, }; static struct miscdevice wdt_miscdev = { diff --git a/drivers/watchdog/scx200_wdt.c b/drivers/watchdog/scx200_wdt.c index d55882bca31..7c1de94704f 100644 --- a/drivers/watchdog/scx200_wdt.c +++ b/drivers/watchdog/scx200_wdt.c @@ -27,9 +27,8 @@ #include #include #include - -#include -#include +#include +#include #define NAME "scx200_wdt" @@ -47,8 +46,9 @@ module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); static u16 wdto_restart; -static struct semaphore open_semaphore; static char expect_close; +static unsigned long open_lock; +static DEFINE_SPINLOCK(scx_lock); /* Bits of the WDCNFG register */ #define W_ENABLE 0x00fa /* Enable watchdog */ @@ -59,7 +59,9 @@ static char expect_close; static void scx200_wdt_ping(void) { + spin_lock(&scx_lock); outw(wdto_restart, scx200_cb_base + SCx200_WDT_WDTO); + spin_unlock(&scx_lock); } static void scx200_wdt_update_margin(void) @@ -73,9 +75,11 @@ static void scx200_wdt_enable(void) printk(KERN_DEBUG NAME ": enabling watchdog timer, wdto_restart = %d\n", wdto_restart); + spin_lock(&scx_lock); outw(0, scx200_cb_base + SCx200_WDT_WDTO); outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS); outw(W_ENABLE, scx200_cb_base + SCx200_WDT_WDCNFG); + spin_unlock(&scx_lock); scx200_wdt_ping(); } @@ -84,15 +88,17 @@ static void scx200_wdt_disable(void) { printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); + spin_lock(&scx_lock); outw(0, scx200_cb_base + SCx200_WDT_WDTO); outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS); outw(W_DISABLE, scx200_cb_base + SCx200_WDT_WDCNFG); + spin_unlock(&scx_lock); } static int scx200_wdt_open(struct inode *inode, struct file *file) { /* only allow one at a time */ - if (down_trylock(&open_semaphore)) + if (test_and_set_bit(0, &open_lock)) return -EBUSY; scx200_wdt_enable(); @@ -101,13 +107,12 @@ static int scx200_wdt_open(struct inode *inode, struct file *file) static int scx200_wdt_release(struct inode *inode, struct file *file) { - if (expect_close != 42) { + if (expect_close != 42) printk(KERN_WARNING NAME ": watchdog device closed unexpectedly, will not disable the watchdog timer\n"); - } else if (!nowayout) { + else if (!nowayout) scx200_wdt_disable(); - } expect_close = 0; - up(&open_semaphore); + clear_bit(0, &open_lock); return 0; } @@ -122,8 +127,7 @@ static int scx200_wdt_notify_sys(struct notifier_block *this, return NOTIFY_DONE; } -static struct notifier_block scx200_wdt_notifier = -{ +static struct notifier_block scx200_wdt_notifier = { .notifier_call = scx200_wdt_notify_sys, }; @@ -131,8 +135,7 @@ static ssize_t scx200_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) { /* check for a magic close character */ - if (len) - { + if (len) { size_t i; scx200_wdt_ping(); @@ -152,15 +155,15 @@ static ssize_t scx200_wdt_write(struct file *file, const char __user *data, return 0; } -static int scx200_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long scx200_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident = { + static const struct watchdog_info ident = { .identity = "NatSemi SCx200 Watchdog", .firmware_version = 1, - .options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING), + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, }; int new_margin; @@ -168,7 +171,7 @@ static int scx200_wdt_ioctl(struct inode *inode, struct file *file, default: return -ENOTTY; case WDIOC_GETSUPPORT: - if(copy_to_user(argp, &ident, sizeof(ident))) + if (copy_to_user(argp, &ident, sizeof(ident))) return -EFAULT; return 0; case WDIOC_GETSTATUS: @@ -195,18 +198,18 @@ static int scx200_wdt_ioctl(struct inode *inode, struct file *file, } static const struct file_operations scx200_wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = scx200_wdt_write, - .ioctl = scx200_wdt_ioctl, - .open = scx200_wdt_open, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = scx200_wdt_write, + .unlocked_ioctl = scx200_wdt_ioctl, + .open = scx200_wdt_open, .release = scx200_wdt_release, }; static struct miscdevice scx200_wdt_miscdev = { .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &scx200_wdt_fops, + .name = "watchdog", + .fops = &scx200_wdt_fops, }; static int __init scx200_wdt_init(void) @@ -229,8 +232,6 @@ static int __init scx200_wdt_init(void) scx200_wdt_update_margin(); scx200_wdt_disable(); - sema_init(&open_semaphore, 1); - r = register_reboot_notifier(&scx200_wdt_notifier); if (r) { printk(KERN_ERR NAME ": unable to register reboot notifier"); @@ -263,7 +264,7 @@ module_exit(scx200_wdt_cleanup); /* Local variables: - compile-command: "make -k -C ../.. SUBDIRS=drivers/char modules" - c-basic-offset: 8 + compile-command: "make -k -C ../.. SUBDIRS=drivers/char modules" + c-basic-offset: 8 End: */ -- GitLab From 70b814ec1a484279a51bf9f7193551b996627247 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:08:55 +0100 Subject: [PATCH 0051/1024] [WATCHDOG 45/57] shwdt: coding style, cleanup, switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/shwdt.c | 139 +++++++++++++++++++++++---------------- 1 file changed, 82 insertions(+), 57 deletions(-) diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c index 1277f7e9cc5..60f0036aaca 100644 --- a/drivers/watchdog/shwdt.c +++ b/drivers/watchdog/shwdt.c @@ -28,9 +28,9 @@ #include #include #include -#include -#include -#include +#include +#include +#include #define PFX "shwdt: " @@ -72,6 +72,7 @@ static struct watchdog_info sh_wdt_info; static char shwdt_expect_close; static DEFINE_TIMER(timer, sh_wdt_ping, 0, 0); static unsigned long next_heartbeat; +static DEFINE_SPINLOCK(shwdt_lock); #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ @@ -86,6 +87,9 @@ static int nowayout = WATCHDOG_NOWAYOUT; static void sh_wdt_start(void) { __u8 csr; + unsigned long flags; + + spin_lock_irqsave(&wdt_lock, flags); next_heartbeat = jiffies + (heartbeat * HZ); mod_timer(&timer, next_ping_period(clock_division_ratio)); @@ -123,6 +127,7 @@ static void sh_wdt_start(void) csr &= ~RSTCSR_RSTS; sh_wdt_write_rstcsr(csr); #endif + spin_unlock_irqrestore(&wdt_lock, flags); } /** @@ -132,12 +137,16 @@ static void sh_wdt_start(void) static void sh_wdt_stop(void) { __u8 csr; + unsigned long flags; + + spin_lock_irqsave(&wdt_lock, flags); del_timer(&timer); csr = sh_wdt_read_csr(); csr &= ~WTCSR_TME; sh_wdt_write_csr(csr); + spin_unlock_irqrestore(&wdt_lock, flags); } /** @@ -146,7 +155,11 @@ static void sh_wdt_stop(void) */ static inline void sh_wdt_keepalive(void) { + unsigned long flags; + + spin_lock_irqsave(&wdt_lock, flags); next_heartbeat = jiffies + (heartbeat * HZ); + spin_unlock_irqrestore(&wdt_lock, flags); } /** @@ -155,10 +168,14 @@ static inline void sh_wdt_keepalive(void) */ static int sh_wdt_set_heartbeat(int t) { - if (unlikely((t < 1) || (t > 3600))) /* arbitrary upper limit */ + unsigned long flags; + + if (unlikely(t < 1 || t > 3600)) /* arbitrary upper limit */ return -EINVAL; + spin_lock_irqsave(&wdt_lock, flags); heartbeat = t; + spin_unlock_irqrestore(&wdt_lock, flags); return 0; } @@ -170,6 +187,9 @@ static int sh_wdt_set_heartbeat(int t) */ static void sh_wdt_ping(unsigned long data) { + unsigned long flags; + + spin_lock_irqsave(&wdt_lock, flags); if (time_before(jiffies, next_heartbeat)) { __u8 csr; @@ -183,6 +203,7 @@ static void sh_wdt_ping(unsigned long data) } else printk(KERN_WARNING PFX "Heartbeat lost! Will not ping " "the watchdog\n"); + spin_unlock_irqrestore(&wdt_lock, flags); } /** @@ -310,7 +331,6 @@ static int sh_wdt_mmap(struct file *file, struct vm_area_struct *vma) /** * sh_wdt_ioctl - Query Device - * @inode: inode of device * @file: file handle of device * @cmd: watchdog command * @arg: argument @@ -318,53 +338,51 @@ static int sh_wdt_mmap(struct file *file, struct vm_area_struct *vma) * Query basic information from the device or ping it, as outlined by the * watchdog API. */ -static int sh_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long sh_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_heartbeat; int options, retval = -EINVAL; switch (cmd) { - case WDIOC_GETSUPPORT: - return copy_to_user((struct watchdog_info *)arg, - &sh_wdt_info, - sizeof(sh_wdt_info)) ? -EFAULT : 0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, (int *)arg); - case WDIOC_KEEPALIVE: - sh_wdt_keepalive(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_heartbeat, (int *)arg)) - return -EFAULT; - - if (sh_wdt_set_heartbeat(new_heartbeat)) - return -EINVAL; - - sh_wdt_keepalive(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, (int *)arg); - case WDIOC_SETOPTIONS: - if (get_user(options, (int *)arg)) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) { - sh_wdt_stop(); - retval = 0; - } + case WDIOC_GETSUPPORT: + return copy_to_user((struct watchdog_info *)arg, + &sh_wdt_info, sizeof(sh_wdt_info)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, (int *)arg); + case WDIOC_KEEPALIVE: + sh_wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, (int *)arg)) + return -EFAULT; - if (options & WDIOS_ENABLECARD) { - sh_wdt_start(); - retval = 0; - } + if (sh_wdt_set_heartbeat(new_heartbeat)) + return -EINVAL; - return retval; - default: - return -ENOTTY; - } + sh_wdt_keepalive(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, (int *)arg); + case WDIOC_SETOPTIONS: + if (get_user(options, (int *)arg)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + sh_wdt_stop(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + sh_wdt_start(); + retval = 0; + } + return retval; + default: + return -ENOTTY; + } return 0; } @@ -390,13 +408,13 @@ static const struct file_operations sh_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = sh_wdt_write, - .ioctl = sh_wdt_ioctl, + .unlocked_ioctl = sh_wdt_ioctl, .open = sh_wdt_open, .release = sh_wdt_close, .mmap = sh_wdt_mmap, }; -static struct watchdog_info sh_wdt_info = { +static const struct watchdog_info sh_wdt_info = { .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, .firmware_version = 1, @@ -422,30 +440,33 @@ static int __init sh_wdt_init(void) { int rc; - if ((clock_division_ratio < 0x5) || (clock_division_ratio > 0x7)) { + if (clock_division_ratio < 0x5 || clock_division_ratio > 0x7) { clock_division_ratio = WTCSR_CKS_4096; - printk(KERN_INFO PFX "clock_division_ratio value must " - "be 0x5<=x<=0x7, using %d\n", clock_division_ratio); + printk(KERN_INFO PFX + "clock_division_ratio value must be 0x5<=x<=0x7, using %d\n", + clock_division_ratio); } rc = sh_wdt_set_heartbeat(heartbeat); if (unlikely(rc)) { heartbeat = WATCHDOG_HEARTBEAT; - printk(KERN_INFO PFX "heartbeat value must " - "be 1<=x<=3600, using %d\n", heartbeat); + printk(KERN_INFO PFX + "heartbeat value must be 1<=x<=3600, using %d\n", + heartbeat); } rc = register_reboot_notifier(&sh_wdt_notifier); if (unlikely(rc)) { - printk(KERN_ERR PFX "Can't register reboot notifier (err=%d)\n", - rc); + printk(KERN_ERR PFX + "Can't register reboot notifier (err=%d)\n", rc); return rc; } rc = misc_register(&sh_wdt_miscdev); if (unlikely(rc)) { - printk(KERN_ERR PFX "Can't register miscdev on " - "minor=%d (err=%d)\n", sh_wdt_miscdev.minor, rc); + printk(KERN_ERR PFX + "Can't register miscdev on minor=%d (err=%d)\n", + sh_wdt_miscdev.minor, rc); unregister_reboot_notifier(&sh_wdt_notifier); return rc; } @@ -476,10 +497,14 @@ module_param(clock_division_ratio, int, 0); MODULE_PARM_DESC(clock_division_ratio, "Clock division ratio. Valid ranges are from 0x5 (1.31ms) to 0x7 (5.25ms). (default=" __MODULE_STRING(clock_division_ratio) ")"); module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1<=heartbeat<=3600, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); +MODULE_PARM_DESC(heartbeat, + "Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=" + __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); module_init(sh_wdt_init); module_exit(sh_wdt_exit); -- GitLab From 598467938dd8bcdcd4d88e9102c609f4caa9d9ef Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:00 +0100 Subject: [PATCH 0052/1024] [WATCHDOG 46/57] smsc37b787_wdt: coding style, switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/smsc37b787_wdt.c | 442 +++++++++++++++--------------- 1 file changed, 222 insertions(+), 220 deletions(-) diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c index 5d2b5ba6141..b7c6394b7d7 100644 --- a/drivers/watchdog/smsc37b787_wdt.c +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -18,7 +18,7 @@ * History: * 2003 - Created version 1.0 for Linux 2.4.x. * 2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE - * features. Released version 1.1 + * features. Released version 1.1 * * Theory of operation: * @@ -55,9 +55,9 @@ #include #include #include +#include +#include -#include -#include #include /* enable support for minutes as units? */ @@ -71,15 +71,15 @@ #define UNIT_MINUTE 1 #define MODNAME "smsc37b787_wdt: " -#define VERSION "1.1" +#define VERSION "1.1" -#define IOPORT 0x3F0 +#define IOPORT 0x3F0 #define IOPORT_SIZE 2 -#define IODEV_NO 8 +#define IODEV_NO 8 -static int unit = UNIT_SECOND; /* timer's unit */ -static int timeout = 60; /* timeout value: default is 60 "units" */ -static unsigned long timer_enabled = 0; /* is the timer enabled? */ +static int unit = UNIT_SECOND; /* timer's unit */ +static int timeout = 60; /* timeout value: default is 60 "units" */ +static unsigned long timer_enabled; /* is the timer enabled? */ static char expect_close; /* is the close expected? */ @@ -93,114 +93,121 @@ static int nowayout = WATCHDOG_NOWAYOUT; static inline void open_io_config(void) { - outb(0x55, IOPORT); + outb(0x55, IOPORT); mdelay(1); - outb(0x55, IOPORT); + outb(0x55, IOPORT); } /* lock the IO chip */ static inline void close_io_config(void) { - outb(0xAA, IOPORT); + outb(0xAA, IOPORT); } /* select the IO device */ static inline void select_io_device(unsigned char devno) { - outb(0x07, IOPORT); - outb(devno, IOPORT+1); + outb(0x07, IOPORT); + outb(devno, IOPORT+1); } /* write to the control register */ static inline void write_io_cr(unsigned char reg, unsigned char data) { - outb(reg, IOPORT); - outb(data, IOPORT+1); + outb(reg, IOPORT); + outb(data, IOPORT+1); } /* read from the control register */ static inline char read_io_cr(unsigned char reg) { - outb(reg, IOPORT); - return inb(IOPORT+1); + outb(reg, IOPORT); + return inb(IOPORT+1); } /* -- Medium level functions ------------------------------------*/ static inline void gpio_bit12(unsigned char reg) { - // -- General Purpose I/O Bit 1.2 -- - // Bit 0, In/Out: 0 = Output, 1 = Input - // Bit 1, Polarity: 0 = No Invert, 1 = Invert - // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable - // Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17, - // 11 = Either Edge Triggered Intr. 2 - // Bit 5/6 (Reserved) - // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain - write_io_cr(0xE2, reg); + /* -- General Purpose I/O Bit 1.2 -- + * Bit 0, In/Out: 0 = Output, 1 = Input + * Bit 1, Polarity: 0 = No Invert, 1 = Invert + * Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable + * Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17, + * 11 = Either Edge Triggered Intr. 2 + * Bit 5/6 (Reserved) + * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain + */ + write_io_cr(0xE2, reg); } static inline void gpio_bit13(unsigned char reg) { - // -- General Purpose I/O Bit 1.3 -- - // Bit 0, In/Out: 0 = Output, 1 = Input - // Bit 1, Polarity: 0 = No Invert, 1 = Invert - // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable - // Bit 3, Function select: 0 = GPI/O, 1 = LED - // Bit 4-6 (Reserved) - // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain - write_io_cr(0xE3, reg); + /* -- General Purpose I/O Bit 1.3 -- + * Bit 0, In/Out: 0 = Output, 1 = Input + * Bit 1, Polarity: 0 = No Invert, 1 = Invert + * Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable + * Bit 3, Function select: 0 = GPI/O, 1 = LED + * Bit 4-6 (Reserved) + * Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain + */ + write_io_cr(0xE3, reg); } static inline void wdt_timer_units(unsigned char new_units) { - // -- Watchdog timer units -- - // Bit 0-6 (Reserved) - // Bit 7, WDT Time-out Value Units Select - // (0 = Minutes, 1 = Seconds) - write_io_cr(0xF1, new_units); + /* -- Watchdog timer units -- + * Bit 0-6 (Reserved) + * Bit 7, WDT Time-out Value Units Select + * (0 = Minutes, 1 = Seconds) + */ + write_io_cr(0xF1, new_units); } static inline void wdt_timeout_value(unsigned char new_timeout) { - // -- Watchdog Timer Time-out Value -- - // Bit 0-7 Binary coded units (0=Disabled, 1..255) - write_io_cr(0xF2, new_timeout); + /* -- Watchdog Timer Time-out Value -- + * Bit 0-7 Binary coded units (0=Disabled, 1..255) + */ + write_io_cr(0xF2, new_timeout); } static inline void wdt_timer_conf(unsigned char conf) { - // -- Watchdog timer configuration -- - // Bit 0 Joystick enable: 0* = No Reset, 1 = Reset WDT upon Gameport I/O - // Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr. - // Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr. - // Bit 3 Reset the timer - // (Wrong in SMsC documentation? Given as: PowerLED Timout Enabled) - // Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled, - // 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15) - write_io_cr(0xF3, conf); + /* -- Watchdog timer configuration -- + * Bit 0 Joystick enable: 0* = No Reset, 1 = Reset WDT upon + * Gameport I/O + * Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr. + * Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr + * Bit 3 Reset the timer + * (Wrong in SMsC documentation? Given as: PowerLED Timout + * Enabled) + * Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled, + * 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15) + */ + write_io_cr(0xF3, conf); } static inline void wdt_timer_ctrl(unsigned char reg) { - // -- Watchdog timer control -- - // Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured - // Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz - // Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning) - // Bit 3 P20 Force Timeout enabled: - // 0 = P20 activity does not generate the WD timeout event - // 1 = P20 Allows rising edge of P20, from the keyboard - // controller, to force the WD timeout event. - // Bit 4 (Reserved) - // -- Soft power management -- - // Bit 5 Stop Counter: 1 = Stop software power down counter - // set via register 0xB8, (self-cleaning) - // (Upon read: 0 = Counter running, 1 = Counter stopped) - // Bit 6 Restart Counter: 1 = Restart software power down counter - // set via register 0xB8, (self-cleaning) - // Bit 7 SPOFF: 1 = Force software power down (self-cleaning) - - write_io_cr(0xF4, reg); + /* -- Watchdog timer control -- + * Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured + * Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz + * Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning) + * Bit 3 P20 Force Timeout enabled: + * 0 = P20 activity does not generate the WD timeout event + * 1 = P20 Allows rising edge of P20, from the keyboard + * controller, to force the WD timeout event. + * Bit 4 (Reserved) + * -- Soft power management -- + * Bit 5 Stop Counter: 1 = Stop software power down counter + * set via register 0xB8, (self-cleaning) + * (Upon read: 0 = Counter running, 1 = Counter stopped) + * Bit 6 Restart Counter: 1 = Restart software power down counter + * set via register 0xB8, (self-cleaning) + * Bit 7 SPOFF: 1 = Force software power down (self-cleaning) + */ + write_io_cr(0xF4, reg); } /* -- Higher level functions ------------------------------------*/ @@ -209,33 +216,34 @@ static inline void wdt_timer_ctrl(unsigned char reg) static void wb_smsc_wdt_initialize(void) { - unsigned char old; + unsigned char old; spin_lock(&io_lock); - open_io_config(); - select_io_device(IODEV_NO); + open_io_config(); + select_io_device(IODEV_NO); - // enable the watchdog - gpio_bit13(0x08); // Select pin 80 = LED not GPIO - gpio_bit12(0x0A); // Set pin 79 = WDT not GPIO/Output/Polarity=Invert + /* enable the watchdog */ + gpio_bit13(0x08); /* Select pin 80 = LED not GPIO */ + gpio_bit12(0x0A); /* Set pin 79 = WDT not + GPIO/Output/Polarity=Invert */ + /* disable the timeout */ + wdt_timeout_value(0); - // disable the timeout - wdt_timeout_value(0); + /* reset control register */ + wdt_timer_ctrl(0x00); - // reset control register - wdt_timer_ctrl(0x00); - - // reset configuration register + /* reset configuration register */ wdt_timer_conf(0x00); - // read old (timer units) register - old = read_io_cr(0xF1) & 0x7F; - if (unit == UNIT_SECOND) old |= 0x80; // set to seconds + /* read old (timer units) register */ + old = read_io_cr(0xF1) & 0x7F; + if (unit == UNIT_SECOND) + old |= 0x80; /* set to seconds */ - // set the watchdog timer units - wdt_timer_units(old); + /* set the watchdog timer units */ + wdt_timer_units(old); - close_io_config(); + close_io_config(); spin_unlock(&io_lock); } @@ -244,23 +252,23 @@ static void wb_smsc_wdt_initialize(void) static void wb_smsc_wdt_shutdown(void) { spin_lock(&io_lock); - open_io_config(); - select_io_device(IODEV_NO); + open_io_config(); + select_io_device(IODEV_NO); - // disable the watchdog - gpio_bit13(0x09); - gpio_bit12(0x09); + /* disable the watchdog */ + gpio_bit13(0x09); + gpio_bit12(0x09); - // reset watchdog config register + /* reset watchdog config register */ wdt_timer_conf(0x00); - // reset watchdog control register - wdt_timer_ctrl(0x00); + /* reset watchdog control register */ + wdt_timer_ctrl(0x00); - // disable timeout - wdt_timeout_value(0x00); + /* disable timeout */ + wdt_timeout_value(0x00); - close_io_config(); + close_io_config(); spin_unlock(&io_lock); } @@ -269,16 +277,16 @@ static void wb_smsc_wdt_shutdown(void) static void wb_smsc_wdt_set_timeout(unsigned char new_timeout) { spin_lock(&io_lock); - open_io_config(); - select_io_device(IODEV_NO); + open_io_config(); + select_io_device(IODEV_NO); - // set Power LED to blink, if we enable the timeout - wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02); + /* set Power LED to blink, if we enable the timeout */ + wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02); - // set timeout value - wdt_timeout_value(new_timeout); + /* set timeout value */ + wdt_timeout_value(new_timeout); - close_io_config(); + close_io_config(); spin_unlock(&io_lock); } @@ -286,32 +294,32 @@ static void wb_smsc_wdt_set_timeout(unsigned char new_timeout) static unsigned char wb_smsc_wdt_get_timeout(void) { - unsigned char set_timeout; + unsigned char set_timeout; spin_lock(&io_lock); - open_io_config(); - select_io_device(IODEV_NO); - set_timeout = read_io_cr(0xF2); - close_io_config(); + open_io_config(); + select_io_device(IODEV_NO); + set_timeout = read_io_cr(0xF2); + close_io_config(); spin_unlock(&io_lock); - return set_timeout; + return set_timeout; } /* disable watchdog */ static void wb_smsc_wdt_disable(void) { - // set the timeout to 0 to disable the watchdog - wb_smsc_wdt_set_timeout(0); + /* set the timeout to 0 to disable the watchdog */ + wb_smsc_wdt_set_timeout(0); } /* enable watchdog by setting the current timeout */ static void wb_smsc_wdt_enable(void) { - // set the current timeout... - wb_smsc_wdt_set_timeout(timeout); + /* set the current timeout... */ + wb_smsc_wdt_set_timeout(timeout); } /* reset the timer */ @@ -319,14 +327,14 @@ static void wb_smsc_wdt_enable(void) static void wb_smsc_wdt_reset_timer(void) { spin_lock(&io_lock); - open_io_config(); - select_io_device(IODEV_NO); + open_io_config(); + select_io_device(IODEV_NO); - // reset the timer + /* reset the timer */ wdt_timeout_value(timeout); wdt_timer_conf(0x08); - close_io_config(); + close_io_config(); spin_unlock(&io_lock); } @@ -355,7 +363,9 @@ static int wb_smsc_wdt_open(struct inode *inode, struct file *file) /* Reload and activate timer */ wb_smsc_wdt_enable(); - printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); + printk(KERN_INFO MODNAME + "Watchdog enabled. Timeout set to %d %s.\n", + timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); return nonseekable_open(inode, file); } @@ -367,10 +377,12 @@ static int wb_smsc_wdt_release(struct inode *inode, struct file *file) /* Shut off the timer. */ if (expect_close == 42) { - wb_smsc_wdt_disable(); - printk(KERN_INFO MODNAME "Watchdog disabled, sleeping again...\n"); + wb_smsc_wdt_disable(); + printk(KERN_INFO MODNAME + "Watchdog disabled, sleeping again...\n"); } else { - printk(KERN_CRIT MODNAME "Unexpected close, not stopping watchdog!\n"); + printk(KERN_CRIT MODNAME + "Unexpected close, not stopping watchdog!\n"); wb_smsc_wdt_reset_timer(); } @@ -392,7 +404,8 @@ static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data, /* reset expect flag */ expect_close = 0; - /* scan to see whether or not we got the magic character */ + /* scan to see whether or not we got the + magic character */ for (i = 0; i != len; i++) { char c; if (get_user(c, data+i)) @@ -410,8 +423,8 @@ static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data, /* ioctl => control interface */ -static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long wb_smsc_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { int new_timeout; @@ -420,9 +433,9 @@ static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file, int __user *i; } uarg; - static struct watchdog_info ident = { + static const struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING | - WDIOF_SETTIMEOUT | + WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, .firmware_version = 0, .identity = "SMsC 37B787 Watchdog" @@ -431,78 +444,62 @@ static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file, uarg.i = (int __user *)arg; switch (cmd) { - default: - return -ENOTTY; - - case WDIOC_GETSUPPORT: - return copy_to_user(uarg.ident, &ident, - sizeof(ident)) ? -EFAULT : 0; - - case WDIOC_GETSTATUS: - return put_user(wb_smsc_wdt_status(), uarg.i); - - case WDIOC_GETBOOTSTATUS: - return put_user(0, uarg.i); - - case WDIOC_KEEPALIVE: - wb_smsc_wdt_reset_timer(); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, uarg.i)) - return -EFAULT; - - // the API states this is given in secs - if (unit == UNIT_MINUTE) - new_timeout /= 60; - - if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) - return -EINVAL; - - timeout = new_timeout; - wb_smsc_wdt_set_timeout(timeout); - - // fall through and return the new timeout... - - case WDIOC_GETTIMEOUT: - - new_timeout = timeout; - - if (unit == UNIT_MINUTE) + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &ident, sizeof(ident)) + ? -EFAULT : 0; + case WDIOC_GETSTATUS: + return put_user(wb_smsc_wdt_status(), uarg.i); + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + case WDIOC_KEEPALIVE: + wb_smsc_wdt_reset_timer(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + /* the API states this is given in secs */ + if (unit == UNIT_MINUTE) + new_timeout /= 60; + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + timeout = new_timeout; + wb_smsc_wdt_set_timeout(timeout); + /* fall through and return the new timeout... */ + case WDIOC_GETTIMEOUT: + new_timeout = timeout; + if (unit == UNIT_MINUTE) new_timeout *= 60; + return put_user(new_timeout, uarg.i); + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; - return put_user(new_timeout, uarg.i); - - case WDIOC_SETOPTIONS: - { - int options, retval = -EINVAL; - - if (get_user(options, uarg.i)) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) { - wb_smsc_wdt_disable(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) { - wb_smsc_wdt_enable(); - retval = 0; - } + if (get_user(options, uarg.i)) + return -EFAULT; - return retval; + if (options & WDIOS_DISABLECARD) { + wb_smsc_wdt_disable(); + retval = 0; } + if (options & WDIOS_ENABLECARD) { + wb_smsc_wdt_enable(); + retval = 0; + } + return retval; + } + default: + return -ENOTTY; } } /* -- Notifier funtions -----------------------------------------*/ -static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +static int wb_smsc_wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) { - if (code == SYS_DOWN || code == SYS_HALT) - { - // set timeout to 0, to avoid possible race-condition - timeout = 0; + if (code == SYS_DOWN || code == SYS_HALT) { + /* set timeout to 0, to avoid possible race-condition */ + timeout = 0; wb_smsc_wdt_disable(); } return NOTIFY_DONE; @@ -510,23 +507,20 @@ static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long cod /* -- Module's structures ---------------------------------------*/ -static const struct file_operations wb_smsc_wdt_fops = -{ - .owner = THIS_MODULE, +static const struct file_operations wb_smsc_wdt_fops = { + .owner = THIS_MODULE, .llseek = no_llseek, .write = wb_smsc_wdt_write, - .ioctl = wb_smsc_wdt_ioctl, + .unlocked_ioctl = wb_smsc_wdt_ioctl, .open = wb_smsc_wdt_open, .release = wb_smsc_wdt_release, }; -static struct notifier_block wb_smsc_wdt_notifier = -{ +static struct notifier_block wb_smsc_wdt_notifier = { .notifier_call = wb_smsc_wdt_notify_sys, }; -static struct miscdevice wb_smsc_wdt_miscdev = -{ +static struct miscdevice wb_smsc_wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &wb_smsc_wdt_fops, @@ -540,39 +534,44 @@ static int __init wb_smsc_wdt_init(void) { int ret; - printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n"); + printk(KERN_INFO "SMsC 37B787 watchdog component driver " + VERSION " initialising...\n"); if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) { - printk(KERN_ERR MODNAME "Unable to register IO port %#x\n", IOPORT); + printk(KERN_ERR MODNAME "Unable to register IO port %#x\n", + IOPORT); ret = -EBUSY; goto out_pnp; } - // set new maximum, if it's too big - if (timeout > MAX_TIMEOUT) - timeout = MAX_TIMEOUT; + /* set new maximum, if it's too big */ + if (timeout > MAX_TIMEOUT) + timeout = MAX_TIMEOUT; - // init the watchdog timer - wb_smsc_wdt_initialize(); + /* init the watchdog timer */ + wb_smsc_wdt_initialize(); ret = register_reboot_notifier(&wb_smsc_wdt_notifier); if (ret) { - printk(KERN_ERR MODNAME "Unable to register reboot notifier err = %d\n", ret); + printk(KERN_ERR MODNAME + "Unable to register reboot notifier err = %d\n", ret); goto out_io; } ret = misc_register(&wb_smsc_wdt_miscdev); if (ret) { - printk(KERN_ERR MODNAME "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR); + printk(KERN_ERR MODNAME + "Unable to register miscdev on minor %d\n", + WATCHDOG_MINOR); goto out_rbt; } - // output info - printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); - printk(KERN_INFO MODNAME "Watchdog initialized and sleeping (nowayout=%d)...\n", nowayout); - - // ret = 0 - + /* output info */ + printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", + timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); + printk(KERN_INFO MODNAME + "Watchdog initialized and sleeping (nowayout=%d)...\n", + nowayout); out_clean: return ret; @@ -591,8 +590,7 @@ out_pnp: static void __exit wb_smsc_wdt_exit(void) { /* Stop the timer before we leave */ - if (!nowayout) - { + if (!nowayout) { wb_smsc_wdt_shutdown(); printk(KERN_INFO MODNAME "Watchdog disabled.\n"); } @@ -601,25 +599,29 @@ static void __exit wb_smsc_wdt_exit(void) unregister_reboot_notifier(&wb_smsc_wdt_notifier); release_region(IOPORT, IOPORT_SIZE); - printk("SMsC 37B787 watchdog component driver removed.\n"); + printk(KERN_INFO "SMsC 37B787 watchdog component driver removed.\n"); } module_init(wb_smsc_wdt_init); module_exit(wb_smsc_wdt_exit); MODULE_AUTHOR("Sven Anders "); -MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " VERSION ")"); +MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " + VERSION ")"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); #ifdef SMSC_SUPPORT_MINUTES module_param(unit, int, 0); -MODULE_PARM_DESC(unit, "set unit to use, 0=seconds or 1=minutes, default is 0"); +MODULE_PARM_DESC(unit, + "set unit to use, 0=seconds or 1=minutes, default is 0"); #endif module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60"); module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -- GitLab From f92d3749d70265468e28643652c0e32c5a56cd2b Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:06 +0100 Subject: [PATCH 0053/1024] [WATCHDOG 47/57] softdog: clean up, coding style and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/softdog.c | 87 ++++++++++++++++++++------------------ 1 file changed, 46 insertions(+), 41 deletions(-) diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c index 9c369490924..bb3c75eed9d 100644 --- a/drivers/watchdog/softdog.c +++ b/drivers/watchdog/softdog.c @@ -47,19 +47,22 @@ #include #include #include - -#include +#include #define PFX "SoftDog: " #define TIMER_MARGIN 60 /* Default is 60 seconds */ static int soft_margin = TIMER_MARGIN; /* in seconds */ module_param(soft_margin, int, 0); -MODULE_PARM_DESC(soft_margin, "Watchdog soft_margin in seconds. (0 Date: Mon, 19 May 2008 14:09:12 +0100 Subject: [PATCH 0054/1024] [WATCHDOG 48/57] txx9: Fix locking, switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/txx9wdt.c | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-) diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c index 57cefef27ce..b729cc447df 100644 --- a/drivers/watchdog/txx9wdt.c +++ b/drivers/watchdog/txx9wdt.c @@ -45,27 +45,34 @@ static unsigned long txx9wdt_alive; static int expect_close; static struct txx9_tmr_reg __iomem *txx9wdt_reg; static struct clk *txx9_imclk; +static DECLARE_LOCK(txx9_lock); static void txx9wdt_ping(void) { + spin_lock(&txx9_lock); __raw_writel(TXx9_TMWTMR_TWIE | TXx9_TMWTMR_TWC, &txx9wdt_reg->wtmr); + spin_unlock(&txx9_lock); } static void txx9wdt_start(void) { + spin_lock(&txx9_lock); __raw_writel(WD_TIMER_CLK * timeout, &txx9wdt_reg->cpra); __raw_writel(WD_TIMER_CCD, &txx9wdt_reg->ccdr); __raw_writel(0, &txx9wdt_reg->tisr); /* clear pending interrupt */ __raw_writel(TXx9_TMTCR_TCE | TXx9_TMTCR_CCDE | TXx9_TMTCR_TMODE_WDOG, &txx9wdt_reg->tcr); __raw_writel(TXx9_TMWTMR_TWIE | TXx9_TMWTMR_TWC, &txx9wdt_reg->wtmr); + spin_unlock(&txx9_lock); } static void txx9wdt_stop(void) { + spin_lock(&txx9_lock); __raw_writel(TXx9_TMWTMR_WDIS, &txx9wdt_reg->wtmr); __raw_writel(__raw_readl(&txx9wdt_reg->tcr) & ~TXx9_TMTCR_TCE, &txx9wdt_reg->tcr); + spin_unlock(&txx9_lock); } static int txx9wdt_open(struct inode *inode, struct file *file) @@ -120,13 +127,13 @@ static ssize_t txx9wdt_write(struct file *file, const char __user *data, return len; } -static int txx9wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long txx9wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; int new_timeout; - static struct watchdog_info ident = { + static const struct watchdog_info ident = { .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, @@ -168,18 +175,18 @@ static int txx9wdt_notify_sys(struct notifier_block *this, unsigned long code, } static const struct file_operations txx9wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = txx9wdt_write, - .ioctl = txx9wdt_ioctl, - .open = txx9wdt_open, - .release = txx9wdt_release, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = txx9wdt_write, + .unlocked_ioctl = txx9wdt_ioctl, + .open = txx9wdt_open, + .release = txx9wdt_release, }; static struct miscdevice txx9wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &txx9wdt_fops, + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &txx9wdt_fops, }; static struct notifier_block txx9wdt_notifier = { -- GitLab From 46a3949ddc422882cc27c88d078838cd31885d78 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:18 +0100 Subject: [PATCH 0055/1024] [WATCHDOG 49/57] w83627hf: coding style, clean up and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/w83627hf_wdt.c | 175 +++++++++++++++----------------- 1 file changed, 83 insertions(+), 92 deletions(-) diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c index 386492821fc..70c843f4201 100644 --- a/drivers/watchdog/w83627hf_wdt.c +++ b/drivers/watchdog/w83627hf_wdt.c @@ -37,9 +37,9 @@ #include #include #include +#include +#include -#include -#include #include #define WATCHDOG_NAME "w83627hf/thf/hg WDT" @@ -57,22 +57,26 @@ MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)"); static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1 <= timeout <= 255, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) "."); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Kernel methods. */ #define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */ -#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */ +#define WDT_EFIR (wdt_io+0) /* Extended Function Index Register + (same as EFER) */ #define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */ -static void -w83627hf_select_wd_register(void) +static void w83627hf_select_wd_register(void) { unsigned char c; outb_p(0x87, WDT_EFER); /* Enter extended function mode */ @@ -93,43 +97,45 @@ w83627hf_select_wd_register(void) outb_p(0x01, WDT_EFDR); /* set bit 0 to activate GPIO2 */ } -static void -w83627hf_unselect_wd_register(void) +static void w83627hf_unselect_wd_register(void) { outb_p(0xAA, WDT_EFER); /* Leave extended function mode */ } /* tyan motherboards seem to set F5 to 0x4C ? * So explicitly init to appropriate value. */ -static void -w83627hf_init(void) + +static void w83627hf_init(void) { unsigned char t; w83627hf_select_wd_register(); outb_p(0xF6, WDT_EFER); /* Select CRF6 */ - t=inb_p(WDT_EFDR); /* read CRF6 */ + t = inb_p(WDT_EFDR); /* read CRF6 */ if (t != 0) { - printk (KERN_INFO PFX "Watchdog already running. Resetting timeout to %d sec\n", timeout); + printk(KERN_INFO PFX + "Watchdog already running. Resetting timeout to %d sec\n", + timeout); outb_p(timeout, WDT_EFDR); /* Write back to CRF6 */ } outb_p(0xF5, WDT_EFER); /* Select CRF5 */ - t=inb_p(WDT_EFDR); /* read CRF5 */ - t&=~0x0C; /* set second mode & disable keyboard turning off watchdog */ + t = inb_p(WDT_EFDR); /* read CRF5 */ + t &= ~0x0C; /* set second mode & disable keyboard + turning off watchdog */ outb_p(t, WDT_EFDR); /* Write back to CRF5 */ outb_p(0xF7, WDT_EFER); /* Select CRF7 */ - t=inb_p(WDT_EFDR); /* read CRF7 */ - t&=~0xC0; /* disable keyboard & mouse turning off watchdog */ + t = inb_p(WDT_EFDR); /* read CRF7 */ + t &= ~0xC0; /* disable keyboard & mouse turning off + watchdog */ outb_p(t, WDT_EFDR); /* Write back to CRF7 */ w83627hf_unselect_wd_register(); } -static void -wdt_ctrl(int timeout) +static void wdt_ctrl(int timeout) { spin_lock(&io_lock); @@ -143,32 +149,28 @@ wdt_ctrl(int timeout) spin_unlock(&io_lock); } -static int -wdt_ping(void) +static int wdt_ping(void) { wdt_ctrl(timeout); return 0; } -static int -wdt_disable(void) +static int wdt_disable(void) { wdt_ctrl(0); return 0; } -static int -wdt_set_heartbeat(int t) +static int wdt_set_heartbeat(int t) { - if ((t < 1) || (t > 255)) + if (t < 1 || t > 255) return -EINVAL; - timeout = t; return 0; } -static ssize_t -wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { @@ -189,72 +191,61 @@ wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) return count; } -static int -wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; int new_timeout; static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "W83627HF WDT", }; switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) - return -EFAULT; - break; - + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - + return put_user(0, p); case WDIOC_KEEPALIVE: - wdt_ping(); - break; - + wdt_ping(); + break; case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - if (wdt_set_heartbeat(new_timeout)) - return -EINVAL; - wdt_ping(); - /* Fall */ - + if (get_user(new_timeout, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_timeout)) + return -EINVAL; + wdt_ping(); + /* Fall */ case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - + return put_user(timeout, p); case WDIOC_SETOPTIONS: { - int options, retval = -EINVAL; - - if (get_user(options, p)) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) { - wdt_disable(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) { - wdt_ping(); - retval = 0; - } + int options, retval = -EINVAL; - return retval; + if (get_user(options, p)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + wdt_disable(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + wdt_ping(); + retval = 0; + } + return retval; } - default: - return -ENOTTY; + return -ENOTTY; } return 0; } -static int -wdt_open(struct inode *inode, struct file *file) +static int wdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; @@ -266,13 +257,13 @@ wdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static int -wdt_close(struct inode *inode, struct file *file) +static int wdt_close(struct inode *inode, struct file *file) { - if (expect_close == 42) { + if (expect_close == 42) wdt_disable(); - } else { - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + else { + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); wdt_ping(); } expect_close = 0; @@ -284,8 +275,7 @@ wdt_close(struct inode *inode, struct file *file) * Notifier for system down */ -static int -wdt_notify_sys(struct notifier_block *this, unsigned long code, +static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { if (code == SYS_DOWN || code == SYS_HALT) { @@ -303,7 +293,7 @@ static const struct file_operations wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdt_write, - .ioctl = wdt_ioctl, + .unlocked_ioctl = wdt_ioctl, .open = wdt_open, .release = wdt_close, }; @@ -323,8 +313,7 @@ static struct notifier_block wdt_notifier = { .notifier_call = wdt_notify_sys, }; -static int __init -wdt_init(void) +static int __init wdt_init(void) { int ret; @@ -332,12 +321,13 @@ wdt_init(void) if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n", - WATCHDOG_TIMEOUT); + printk(KERN_INFO PFX + "timeout value must be 1 <= timeout <= 255, using %d\n", + WATCHDOG_TIMEOUT); } if (!request_region(wdt_io, 1, WATCHDOG_NAME)) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", + printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", wdt_io); ret = -EIO; goto out; @@ -347,20 +337,22 @@ wdt_init(void) ret = register_reboot_notifier(&wdt_notifier); if (ret != 0) { - printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - ret); + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", ret); goto unreg_regions; } ret = misc_register(&wdt_miscdev); if (ret != 0) { - printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_reboot; } - printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", - timeout, nowayout); + printk(KERN_INFO PFX + "initialized. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); out: return ret; @@ -371,12 +363,11 @@ unreg_regions: goto out; } -static void __exit -wdt_exit(void) +static void __exit wdt_exit(void) { misc_deregister(&wdt_miscdev); unregister_reboot_notifier(&wdt_notifier); - release_region(wdt_io,1); + release_region(wdt_io, 1); } module_init(wdt_init); -- GitLab From c1c8dd39f53e56d6a92aa6a2db9940d912d7ee4c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:23 +0100 Subject: [PATCH 0056/1024] [WATCHDOG 50/57] w83697hf_wdt: cleanup, coding style and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/w83697hf_wdt.c | 148 ++++++++++++++++---------------- 1 file changed, 73 insertions(+), 75 deletions(-) diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index 528b882420b..06ddd38675b 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -36,9 +36,9 @@ #include #include #include +#include +#include -#include -#include #include #define WATCHDOG_NAME "w83697hf/hg WDT" @@ -53,37 +53,43 @@ static DEFINE_SPINLOCK(io_lock); /* You must set this - there is no sane way to probe for this board. */ static int wdt_io = 0x2e; module_param(wdt_io, int, 0); -MODULE_PARM_DESC(wdt_io, "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)"); +MODULE_PARM_DESC(wdt_io, + "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)"); static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255 (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1<= timeout <=255 (default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static int early_disable = WATCHDOG_EARLY_DISABLE; module_param(early_disable, int, 0); -MODULE_PARM_DESC(early_disable, "Watchdog gets disabled at boot time (default=" __MODULE_STRING(WATCHDOG_EARLY_DISABLE) ")"); +MODULE_PARM_DESC(early_disable, + "Watchdog gets disabled at boot time (default=" + __MODULE_STRING(WATCHDOG_EARLY_DISABLE) ")"); /* * Kernel methods. */ -#define W83697HF_EFER (wdt_io+0) /* Extended Function Enable Register */ -#define W83697HF_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */ -#define W83697HF_EFDR (wdt_io+1) /* Extended Function Data Register */ +#define W83697HF_EFER (wdt_io + 0) /* Extended Function Enable Register */ +#define W83697HF_EFIR (wdt_io + 0) /* Extended Function Index Register + (same as EFER) */ +#define W83697HF_EFDR (wdt_io + 1) /* Extended Function Data Register */ -static inline void -w83697hf_unlock(void) +static inline void w83697hf_unlock(void) { outb_p(0x87, W83697HF_EFER); /* Enter extended function mode */ outb_p(0x87, W83697HF_EFER); /* Again according to manual */ } -static inline void -w83697hf_lock(void) +static inline void w83697hf_lock(void) { outb_p(0xAA, W83697HF_EFER); /* Leave extended function mode */ } @@ -93,41 +99,36 @@ w83697hf_lock(void) * w83697hf_write_timeout() must be called with the device unlocked. */ -static unsigned char -w83697hf_get_reg(unsigned char reg) +static unsigned char w83697hf_get_reg(unsigned char reg) { outb_p(reg, W83697HF_EFIR); return inb_p(W83697HF_EFDR); } -static void -w83697hf_set_reg(unsigned char reg, unsigned char data) +static void w83697hf_set_reg(unsigned char reg, unsigned char data) { outb_p(reg, W83697HF_EFIR); outb_p(data, W83697HF_EFDR); } -static void -w83697hf_write_timeout(int timeout) +static void w83697hf_write_timeout(int timeout) { - w83697hf_set_reg(0xF4, timeout); /* Write Timeout counter to CRF4 */ + /* Write Timeout counter to CRF4 */ + w83697hf_set_reg(0xF4, timeout); } -static void -w83697hf_select_wdt(void) +static void w83697hf_select_wdt(void) { w83697hf_unlock(); w83697hf_set_reg(0x07, 0x08); /* Switch to logic device 8 (GPIO2) */ } -static inline void -w83697hf_deselect_wdt(void) +static inline void w83697hf_deselect_wdt(void) { w83697hf_lock(); } -static void -w83697hf_init(void) +static void w83697hf_init(void) { unsigned char bbuf; @@ -136,7 +137,9 @@ w83697hf_init(void) bbuf = w83697hf_get_reg(0x29); bbuf &= ~0x60; bbuf |= 0x20; - w83697hf_set_reg(0x29, bbuf); /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ + + /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ + w83697hf_set_reg(0x29, bbuf); bbuf = w83697hf_get_reg(0xF3); bbuf &= ~0x04; @@ -145,8 +148,7 @@ w83697hf_init(void) w83697hf_deselect_wdt(); } -static void -wdt_ping(void) +static void wdt_ping(void) { spin_lock(&io_lock); w83697hf_select_wdt(); @@ -157,8 +159,7 @@ wdt_ping(void) spin_unlock(&io_lock); } -static void -wdt_enable(void) +static void wdt_enable(void) { spin_lock(&io_lock); w83697hf_select_wdt(); @@ -170,8 +171,7 @@ wdt_enable(void) spin_unlock(&io_lock); } -static void -wdt_disable(void) +static void wdt_disable(void) { spin_lock(&io_lock); w83697hf_select_wdt(); @@ -183,8 +183,7 @@ wdt_disable(void) spin_unlock(&io_lock); } -static unsigned char -wdt_running(void) +static unsigned char wdt_running(void) { unsigned char t; @@ -199,18 +198,17 @@ wdt_running(void) return t; } -static int -wdt_set_heartbeat(int t) +static int wdt_set_heartbeat(int t) { - if ((t < 1) || (t > 255)) + if (t < 1 || t > 255) return -EINVAL; timeout = t; return 0; } -static ssize_t -wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { @@ -231,15 +229,14 @@ wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) return count; } -static int -wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; int new_timeout; - static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "W83697HF WDT", }; @@ -295,8 +292,7 @@ wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, return 0; } -static int -wdt_open(struct inode *inode, struct file *file) +static int wdt_open(struct inode *inode, struct file *file) { if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; @@ -308,13 +304,13 @@ wdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static int -wdt_close(struct inode *inode, struct file *file) +static int wdt_close(struct inode *inode, struct file *file) { - if (expect_close == 42) { + if (expect_close == 42) wdt_disable(); - } else { - printk (KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + else { + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); wdt_ping(); } expect_close = 0; @@ -326,8 +322,7 @@ wdt_close(struct inode *inode, struct file *file) * Notifier for system down */ -static int -wdt_notify_sys(struct notifier_block *this, unsigned long code, +static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { if (code == SYS_DOWN || code == SYS_HALT) { @@ -345,7 +340,7 @@ static const struct file_operations wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdt_write, - .ioctl = wdt_ioctl, + .unlocked_ioctl = wdt_ioctl, .open = wdt_open, .release = wdt_close, }; @@ -365,36 +360,38 @@ static struct notifier_block wdt_notifier = { .notifier_call = wdt_notify_sys, }; -static int -w83697hf_check_wdt(void) +static int w83697hf_check_wdt(void) { if (!request_region(wdt_io, 2, WATCHDOG_NAME)) { - printk (KERN_ERR PFX "I/O address 0x%x already in use\n", wdt_io); + printk(KERN_ERR PFX + "I/O address 0x%x already in use\n", wdt_io); return -EIO; } - printk (KERN_DEBUG PFX "Looking for watchdog at address 0x%x\n", wdt_io); + printk(KERN_DEBUG PFX + "Looking for watchdog at address 0x%x\n", wdt_io); w83697hf_unlock(); if (w83697hf_get_reg(0x20) == 0x60) { - printk (KERN_INFO PFX "watchdog found at address 0x%x\n", wdt_io); + printk(KERN_INFO PFX + "watchdog found at address 0x%x\n", wdt_io); w83697hf_lock(); return 0; } - w83697hf_lock(); /* Reprotect in case it was a compatible device */ + /* Reprotect in case it was a compatible device */ + w83697hf_lock(); - printk (KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io); + printk(KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io); release_region(wdt_io, 2); return -EIO; } static int w83697hf_ioports[] = { 0x2e, 0x4e, 0x00 }; -static int __init -wdt_init(void) +static int __init wdt_init(void) { int ret, i, found = 0; - printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n"); + printk(KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n"); if (wdt_io == 0) { /* we will autodetect the W83697HF/HG watchdog */ @@ -409,7 +406,7 @@ wdt_init(void) } if (!found) { - printk (KERN_ERR PFX "No W83697HF/HG could be found\n"); + printk(KERN_ERR PFX "No W83697HF/HG could be found\n"); ret = -EIO; goto out; } @@ -423,25 +420,27 @@ wdt_init(void) if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); - printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n", - WATCHDOG_TIMEOUT); + printk(KERN_INFO PFX + "timeout value must be 1 <= timeout <= 255, using %d\n", + WATCHDOG_TIMEOUT); } ret = register_reboot_notifier(&wdt_notifier); if (ret != 0) { - printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - ret); + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", ret); goto unreg_regions; } ret = misc_register(&wdt_miscdev); if (ret != 0) { - printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto unreg_reboot; } - printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", + printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); out: @@ -453,8 +452,7 @@ unreg_regions: goto out; } -static void __exit -wdt_exit(void) +static void __exit wdt_exit(void) { misc_deregister(&wdt_miscdev); unregister_reboot_notifier(&wdt_notifier); -- GitLab From c1cfd1a2ffc5ee58f744b1ceb0887285df187668 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:29 +0100 Subject: [PATCH 0057/1024] [WATCHDOG 51/57] w83877f_wdt: clean up code, coding style, switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/w83877f_wdt.c | 199 +++++++++++++++++---------------- 1 file changed, 101 insertions(+), 98 deletions(-) diff --git a/drivers/watchdog/w83877f_wdt.c b/drivers/watchdog/w83877f_wdt.c index f510a3a595e..75b546d7d8c 100644 --- a/drivers/watchdog/w83877f_wdt.c +++ b/drivers/watchdog/w83877f_wdt.c @@ -23,13 +23,16 @@ * Added KERN_* tags to printks * add CONFIG_WATCHDOG_NOWAYOUT support * fix possible wdt_is_open race - * changed watchdog_info to correctly reflect what the driver offers - * added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS, WDIOC_SETTIMEOUT, + * changed watchdog_info to correctly reflect what + * the driver offers + * added WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS, + * WDIOC_SETTIMEOUT, * WDIOC_GETTIMEOUT, and WDIOC_SETOPTIONS ioctls * 09/8 - 2003 [wim@iguana.be] cleanup of trailing spaces * added extra printk's for startup problems * use module_param - * made timeout (the emulated heartbeat) a module_param + * made timeout (the emulated heartbeat) a + * module_param * made the keepalive ping an internal subroutine * * This WDT driver is different from most other Linux WDT @@ -51,8 +54,8 @@ #include #include #include -#include -#include +#include +#include #include #define OUR_NAME "w83877f_wdt" @@ -80,14 +83,19 @@ */ #define WATCHDOG_TIMEOUT 30 /* 30 sec default timeout */ -static int timeout = WATCHDOG_TIMEOUT; /* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +/* in seconds, will be multiplied by HZ to get seconds to wait for a ping */ +static int timeout = WATCHDOG_TIMEOUT; module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. (1<=timeout<=3600, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. (1<=timeout<=3600, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static void wdt_timer_ping(unsigned long); static DEFINE_TIMER(timer, wdt_timer_ping, 0, 0); @@ -105,8 +113,7 @@ static void wdt_timer_ping(unsigned long data) /* If we got a heartbeat pulse within the WDT_US_INTERVAL * we agree to ping the WDT */ - if(time_before(jiffies, next_heartbeat)) - { + if (time_before(jiffies, next_heartbeat)) { /* Ping the WDT */ spin_lock(&wdt_spinlock); @@ -118,9 +125,9 @@ static void wdt_timer_ping(unsigned long data) spin_unlock(&wdt_spinlock); - } else { - printk(KERN_WARNING PFX "Heartbeat lost! Will not ping the watchdog\n"); - } + } else + printk(KERN_WARNING PFX + "Heartbeat lost! Will not ping the watchdog\n"); } /* @@ -181,22 +188,21 @@ static void wdt_keepalive(void) * /dev/watchdog handling */ -static ssize_t fop_write(struct file * file, const char __user * buf, size_t count, loff_t * ppos) +static ssize_t fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ - if(count) - { - if (!nowayout) - { + if (count) { + if (!nowayout) { size_t ofs; - /* note: just in case someone wrote the magic character - * five months ago... */ + /* note: just in case someone wrote the magic + character five months ago... */ wdt_expect_close = 0; - /* scan to see whether or not we got the magic character */ - for(ofs = 0; ofs != count; ofs++) - { + /* scan to see whether or not we got the + magic character */ + for (ofs = 0; ofs != count; ofs++) { char c; if (get_user(c, buf + ofs)) return -EFAULT; @@ -211,10 +217,10 @@ static ssize_t fop_write(struct file * file, const char __user * buf, size_t cou return count; } -static int fop_open(struct inode * inode, struct file * file) +static int fop_open(struct inode *inode, struct file *file) { /* Just in case we're already talking to someone... */ - if(test_and_set_bit(0, &wdt_is_open)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; /* Good, fire up the show */ @@ -222,78 +228,78 @@ static int fop_open(struct inode * inode, struct file * file) return nonseekable_open(inode, file); } -static int fop_close(struct inode * inode, struct file * file) +static int fop_close(struct inode *inode, struct file *file) { - if(wdt_expect_close == 42) + if (wdt_expect_close == 42) wdt_turnoff(); else { del_timer(&timer); - printk(KERN_CRIT PFX "device file closed unexpectedly. Will not stop the WDT!\n"); + printk(KERN_CRIT PFX + "device file closed unexpectedly. Will not stop the WDT!\n"); } clear_bit(0, &wdt_is_open); wdt_expect_close = 0; return 0; } -static int fop_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident= - { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT + | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "W83877F", }; - switch(cmd) + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETOPTIONS: { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; - case WDIOC_SETOPTIONS: - { - int new_options, retval = -EINVAL; - - if(get_user(new_options, p)) - return -EFAULT; - - if(new_options & WDIOS_DISABLECARD) { - wdt_turnoff(); - retval = 0; - } + int new_options, retval = -EINVAL; - if(new_options & WDIOS_ENABLECARD) { - wdt_startup(); - retval = 0; - } + if (get_user(new_options, p)) + return -EFAULT; - return retval; + if (new_options & WDIOS_DISABLECARD) { + wdt_turnoff(); + retval = 0; } - case WDIOC_SETTIMEOUT: - { - int new_timeout; - if(get_user(new_timeout, p)) - return -EFAULT; + if (new_options & WDIOS_ENABLECARD) { + wdt_startup(); + retval = 0; + } - if(new_timeout < 1 || new_timeout > 3600) /* arbitrary upper limit */ - return -EINVAL; + return retval; + } + case WDIOC_SETTIMEOUT: + { + int new_timeout; - timeout = new_timeout; - wdt_keepalive(); - /* Fall through */ - } - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); + if (get_user(new_timeout, p)) + return -EFAULT; + + /* arbitrary upper limit */ + if (new_timeout < 1 || new_timeout > 3600) + return -EINVAL; + + timeout = new_timeout; + wdt_keepalive(); + /* Fall through */ + } + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); } } @@ -303,7 +309,7 @@ static const struct file_operations wdt_fops = { .write = fop_write, .open = fop_open, .release = fop_close, - .ioctl = fop_ioctl, + .unlocked_ioctl = fop_ioctl, }; static struct miscdevice wdt_miscdev = { @@ -319,7 +325,7 @@ static struct miscdevice wdt_miscdev = { static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if(code==SYS_DOWN || code==SYS_HALT) + if (code == SYS_DOWN || code == SYS_HALT) wdt_turnoff(); return NOTIFY_DONE; } @@ -329,8 +335,7 @@ static int wdt_notify_sys(struct notifier_block *this, unsigned long code, * turn the timebomb registers off. */ -static struct notifier_block wdt_notifier= -{ +static struct notifier_block wdt_notifier = { .notifier_call = wdt_notify_sys, }; @@ -342,31 +347,29 @@ static void __exit w83877f_wdt_unload(void) misc_deregister(&wdt_miscdev); unregister_reboot_notifier(&wdt_notifier); - release_region(WDT_PING,1); - release_region(ENABLE_W83877F_PORT,2); + release_region(WDT_PING, 1); + release_region(ENABLE_W83877F_PORT, 2); } static int __init w83877f_wdt_init(void) { int rc = -EBUSY; - if(timeout < 1 || timeout > 3600) /* arbitrary upper limit */ - { + if (timeout < 1 || timeout > 3600) { /* arbitrary upper limit */ timeout = WATCHDOG_TIMEOUT; - printk(KERN_INFO PFX "timeout value must be 1<=x<=3600, using %d\n", - timeout); + printk(KERN_INFO PFX + "timeout value must be 1 <= x <= 3600, using %d\n", + timeout); } - if (!request_region(ENABLE_W83877F_PORT, 2, "W83877F WDT")) - { + if (!request_region(ENABLE_W83877F_PORT, 2, "W83877F WDT")) { printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", ENABLE_W83877F_PORT); rc = -EIO; goto err_out; } - if (!request_region(WDT_PING, 1, "W8387FF WDT")) - { + if (!request_region(WDT_PING, 1, "W8387FF WDT")) { printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", WDT_PING); rc = -EIO; @@ -374,22 +377,22 @@ static int __init w83877f_wdt_init(void) } rc = register_reboot_notifier(&wdt_notifier); - if (rc) - { - printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - rc); + if (rc) { + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", rc); goto err_out_region2; } rc = misc_register(&wdt_miscdev); - if (rc) - { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - wdt_miscdev.minor, rc); + if (rc) { + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); goto err_out_reboot; } - printk(KERN_INFO PFX "WDT driver for W83877F initialised. timeout=%d sec (nowayout=%d)\n", + printk(KERN_INFO PFX + "WDT driver for W83877F initialised. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); return 0; @@ -397,9 +400,9 @@ static int __init w83877f_wdt_init(void) err_out_reboot: unregister_reboot_notifier(&wdt_notifier); err_out_region2: - release_region(WDT_PING,1); + release_region(WDT_PING, 1); err_out_region1: - release_region(ENABLE_W83877F_PORT,2); + release_region(ENABLE_W83877F_PORT, 2); err_out: return rc; } -- GitLab From 84af401af831567967250dec9c15680bceede5e4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:34 +0100 Subject: [PATCH 0058/1024] [WATCHDOG 52/57] w83977f_wdt: clean up, coding style and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/w83977f_wdt.c | 225 ++++++++++++++++----------------- 1 file changed, 111 insertions(+), 114 deletions(-) diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c index b209bcd7f78..6860a13f5bb 100644 --- a/drivers/watchdog/w83977f_wdt.c +++ b/drivers/watchdog/w83977f_wdt.c @@ -26,10 +26,10 @@ #include #include #include +#include +#include -#include #include -#include #define WATCHDOG_VERSION "1.00" #define WATCHDOG_NAME "W83977F WDT" @@ -53,13 +53,17 @@ static char expect_close; static DEFINE_SPINLOCK(spinlock); module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (15..7635), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds (15..7635), default=" + __MODULE_STRING(DEFAULT_TIMEOUT) ")"); module_param(testmode, int, 0); -MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0"); +MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Start the watchdog @@ -72,8 +76,8 @@ static int wdt_start(void) spin_lock_irqsave(&spinlock, flags); /* Unlock the SuperIO chip */ - outb_p(UNLOCK_DATA,IO_INDEX_PORT); - outb_p(UNLOCK_DATA,IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); /* * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4. @@ -81,50 +85,49 @@ static int wdt_start(void) * F3 is set to enable watchdog LED blink at timeout. * F4 is used to just clear the TIMEOUT'ed state (bit 0). */ - outb_p(DEVICE_REGISTER,IO_INDEX_PORT); - outb_p(0x08,IO_DATA_PORT); - outb_p(0xF2,IO_INDEX_PORT); - outb_p(timeoutW,IO_DATA_PORT); - outb_p(0xF3,IO_INDEX_PORT); - outb_p(0x08,IO_DATA_PORT); - outb_p(0xF4,IO_INDEX_PORT); - outb_p(0x00,IO_DATA_PORT); + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(timeoutW, IO_DATA_PORT); + outb_p(0xF3, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF4, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); /* Set device Aux2 active */ - outb_p(0x30,IO_INDEX_PORT); - outb_p(0x01,IO_DATA_PORT); + outb_p(0x30, IO_INDEX_PORT); + outb_p(0x01, IO_DATA_PORT); - /* + /* * Select device Aux1 (dev=7) to set GP16 as the watchdog output * (in reg E6) and GP13 as the watchdog LED output (in reg E3). * Map GP16 at pin 119. * In test mode watch the bit 0 on F4 to indicate "triggered" or * check watchdog LED on SBC. */ - outb_p(DEVICE_REGISTER,IO_INDEX_PORT); - outb_p(0x07,IO_DATA_PORT); - if (!testmode) - { + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x07, IO_DATA_PORT); + if (!testmode) { unsigned pin_map; - outb_p(0xE6,IO_INDEX_PORT); - outb_p(0x0A,IO_DATA_PORT); - outb_p(0x2C,IO_INDEX_PORT); + outb_p(0xE6, IO_INDEX_PORT); + outb_p(0x0A, IO_DATA_PORT); + outb_p(0x2C, IO_INDEX_PORT); pin_map = inb_p(IO_DATA_PORT); pin_map |= 0x10; pin_map &= ~(0x20); - outb_p(0x2C,IO_INDEX_PORT); - outb_p(pin_map,IO_DATA_PORT); + outb_p(0x2C, IO_INDEX_PORT); + outb_p(pin_map, IO_DATA_PORT); } - outb_p(0xE3,IO_INDEX_PORT); - outb_p(0x08,IO_DATA_PORT); + outb_p(0xE3, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); /* Set device Aux1 active */ - outb_p(0x30,IO_INDEX_PORT); - outb_p(0x01,IO_DATA_PORT); + outb_p(0x30, IO_INDEX_PORT); + outb_p(0x01, IO_DATA_PORT); /* Lock the SuperIO chip */ - outb_p(LOCK_DATA,IO_INDEX_PORT); + outb_p(LOCK_DATA, IO_INDEX_PORT); spin_unlock_irqrestore(&spinlock, flags); @@ -144,42 +147,41 @@ static int wdt_stop(void) spin_lock_irqsave(&spinlock, flags); /* Unlock the SuperIO chip */ - outb_p(UNLOCK_DATA,IO_INDEX_PORT); - outb_p(UNLOCK_DATA,IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); - /* + /* * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4. * F2 is reset to its default value (watchdog timer disabled). * F3 is reset to its default state. * F4 clears the TIMEOUT'ed state (bit 0) - back to default. */ - outb_p(DEVICE_REGISTER,IO_INDEX_PORT); - outb_p(0x08,IO_DATA_PORT); - outb_p(0xF2,IO_INDEX_PORT); - outb_p(0xFF,IO_DATA_PORT); - outb_p(0xF3,IO_INDEX_PORT); - outb_p(0x00,IO_DATA_PORT); - outb_p(0xF4,IO_INDEX_PORT); - outb_p(0x00,IO_DATA_PORT); - outb_p(0xF2,IO_INDEX_PORT); - outb_p(0x00,IO_DATA_PORT); + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(0xFF, IO_DATA_PORT); + outb_p(0xF3, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); + outb_p(0xF4, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(0x00, IO_DATA_PORT); /* - * Select device Aux1 (dev=7) to set GP16 (in reg E6) and + * Select device Aux1 (dev=7) to set GP16 (in reg E6) and * Gp13 (in reg E3) as inputs. */ - outb_p(DEVICE_REGISTER,IO_INDEX_PORT); - outb_p(0x07,IO_DATA_PORT); - if (!testmode) - { - outb_p(0xE6,IO_INDEX_PORT); - outb_p(0x01,IO_DATA_PORT); + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x07, IO_DATA_PORT); + if (!testmode) { + outb_p(0xE6, IO_INDEX_PORT); + outb_p(0x01, IO_DATA_PORT); } - outb_p(0xE3,IO_INDEX_PORT); - outb_p(0x01,IO_DATA_PORT); + outb_p(0xE3, IO_INDEX_PORT); + outb_p(0x01, IO_DATA_PORT); /* Lock the SuperIO chip */ - outb_p(LOCK_DATA,IO_INDEX_PORT); + outb_p(LOCK_DATA, IO_INDEX_PORT); spin_unlock_irqrestore(&spinlock, flags); @@ -200,17 +202,17 @@ static int wdt_keepalive(void) spin_lock_irqsave(&spinlock, flags); /* Unlock the SuperIO chip */ - outb_p(UNLOCK_DATA,IO_INDEX_PORT); - outb_p(UNLOCK_DATA,IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); /* Select device Aux2 (device=8) to kick watchdog reg F2 */ - outb_p(DEVICE_REGISTER,IO_INDEX_PORT); - outb_p(0x08,IO_DATA_PORT); - outb_p(0xF2,IO_INDEX_PORT); - outb_p(timeoutW,IO_DATA_PORT); + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF2, IO_INDEX_PORT); + outb_p(timeoutW, IO_DATA_PORT); /* Lock the SuperIO chip */ - outb_p(LOCK_DATA,IO_INDEX_PORT); + outb_p(LOCK_DATA, IO_INDEX_PORT); spin_unlock_irqrestore(&spinlock, flags); @@ -227,7 +229,7 @@ static int wdt_set_timeout(int t) /* * Convert seconds to watchdog counter time units, rounding up. - * On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup + * On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup * value. This information is supplied in the PCM-5335 manual and was * checked by me on a real board. This is a bit strange because W83977f * datasheet says counter unit is in minutes! @@ -241,7 +243,7 @@ static int wdt_set_timeout(int t) return -EINVAL; /* - * timeout is the timeout in seconds, + * timeout is the timeout in seconds, * timeoutW is the timeout in watchdog counter units. */ timeoutW = tmrval; @@ -261,17 +263,17 @@ static int wdt_get_status(int *status) spin_lock_irqsave(&spinlock, flags); /* Unlock the SuperIO chip */ - outb_p(UNLOCK_DATA,IO_INDEX_PORT); - outb_p(UNLOCK_DATA,IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); + outb_p(UNLOCK_DATA, IO_INDEX_PORT); /* Select device Aux2 (device=8) to read watchdog reg F4 */ - outb_p(DEVICE_REGISTER,IO_INDEX_PORT); - outb_p(0x08,IO_DATA_PORT); - outb_p(0xF4,IO_INDEX_PORT); + outb_p(DEVICE_REGISTER, IO_INDEX_PORT); + outb_p(0x08, IO_DATA_PORT); + outb_p(0xF4, IO_INDEX_PORT); new_status = inb_p(IO_DATA_PORT); /* Lock the SuperIO chip */ - outb_p(LOCK_DATA,IO_INDEX_PORT); + outb_p(LOCK_DATA, IO_INDEX_PORT); spin_unlock_irqrestore(&spinlock, flags); @@ -290,7 +292,7 @@ static int wdt_get_status(int *status) static int wdt_open(struct inode *inode, struct file *file) { /* If the watchdog is alive we don't need to start it again */ - if( test_and_set_bit(0, &timer_alive) ) + if (test_and_set_bit(0, &timer_alive)) return -EBUSY; if (nowayout) @@ -306,13 +308,13 @@ static int wdt_release(struct inode *inode, struct file *file) * Shut off the timer. * Lock it in if it's a module and we set nowayout */ - if (expect_close == 42) - { + if (expect_close == 42) { wdt_stop(); clear_bit(0, &timer_alive); } else { wdt_keepalive(); - printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n"); + printk(KERN_CRIT PFX + "unexpected close, not stopping watchdog!\n"); } expect_close = 0; return 0; @@ -333,24 +335,22 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ - if(count) - { - if (!nowayout) - { + if (count) { + if (!nowayout) { size_t ofs; - /* note: just in case someone wrote the magic character long ago */ + /* note: just in case someone wrote the + magic character long ago */ expect_close = 0; - /* scan to see whether or not we got the magic character */ - for(ofs = 0; ofs != count; ofs++) - { + /* scan to see whether or not we got the + magic character */ + for (ofs = 0; ofs != count; ofs++) { char c; if (get_user(c, buf + ofs)) return -EFAULT; - if (c == 'V') { + if (c == 'V') expect_close = 42; - } } } @@ -377,8 +377,7 @@ static struct watchdog_info ident = { .identity = WATCHDOG_NAME, }; -static int wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { int status; int new_options, retval = -EINVAL; @@ -390,13 +389,13 @@ static int wdt_ioctl(struct inode *inode, struct file *file, uarg.i = (int __user *)arg; - switch(cmd) - { + switch (cmd) { default: return -ENOTTY; case WDIOC_GETSUPPORT: - return copy_to_user(uarg.ident, &ident, sizeof(ident)) ? -EFAULT : 0; + return copy_to_user(uarg.ident, &ident, + sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: wdt_get_status(&status); @@ -410,7 +409,7 @@ static int wdt_ioctl(struct inode *inode, struct file *file, return 0; case WDIOC_SETOPTIONS: - if (get_user (new_options, uarg.i)) + if (get_user(new_options, uarg.i)) return -EFAULT; if (new_options & WDIOS_DISABLECARD) { @@ -444,23 +443,21 @@ static int wdt_ioctl(struct inode *inode, struct file *file, static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code==SYS_DOWN || code==SYS_HALT) + if (code == SYS_DOWN || code == SYS_HALT) wdt_stop(); return NOTIFY_DONE; } -static const struct file_operations wdt_fops= -{ +static const struct file_operations wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdt_write, - .ioctl = wdt_ioctl, + .unlocked_ioctl = wdt_ioctl, .open = wdt_open, .release = wdt_release, }; -static struct miscdevice wdt_miscdev= -{ +static struct miscdevice wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &wdt_fops, @@ -474,20 +471,20 @@ static int __init w83977f_wdt_init(void) { int rc; - printk(KERN_INFO PFX DRIVER_VERSION); + printk(KERN_INFO PFX DRIVER_VERSION); /* - * Check that the timeout value is within it's range ; + * Check that the timeout value is within it's range; * if not reset to the default */ if (wdt_set_timeout(timeout)) { wdt_set_timeout(DEFAULT_TIMEOUT); - printk(KERN_INFO PFX "timeout value must be 15<=timeout<=7635, using %d\n", - DEFAULT_TIMEOUT); + printk(KERN_INFO PFX + "timeout value must be 15 <= timeout <= 7635, using %d\n", + DEFAULT_TIMEOUT); } - if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME)) - { + if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME)) { printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", IO_INDEX_PORT); rc = -EIO; @@ -495,30 +492,30 @@ static int __init w83977f_wdt_init(void) } rc = register_reboot_notifier(&wdt_notifier); - if (rc) - { - printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - rc); + if (rc) { + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", rc); goto err_out_region; } rc = misc_register(&wdt_miscdev); - if (rc) - { - printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - wdt_miscdev.minor, rc); + if (rc) { + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + wdt_miscdev.minor, rc); goto err_out_reboot; } - printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d testmode=%d)\n", - timeout, nowayout, testmode); + printk(KERN_INFO PFX + "initialized. timeout=%d sec (nowayout=%d testmode=%d)\n", + timeout, nowayout, testmode); return 0; err_out_reboot: unregister_reboot_notifier(&wdt_notifier); err_out_region: - release_region(IO_INDEX_PORT,2); + release_region(IO_INDEX_PORT, 2); err_out: return rc; } @@ -528,7 +525,7 @@ static void __exit w83977f_wdt_exit(void) wdt_stop(); misc_deregister(&wdt_miscdev); unregister_reboot_notifier(&wdt_notifier); - release_region(IO_INDEX_PORT,2); + release_region(IO_INDEX_PORT, 2); } module_init(w83977f_wdt_init); -- GitLab From 694b16b2bd23bbd13163762c29f1e7885fe0da41 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:40 +0100 Subject: [PATCH 0059/1024] [WATCHDOG 53/57] wafer5823wdt: Clean up, coding style, switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/wafer5823wdt.c | 80 +++++++++++++++++++-------------- 1 file changed, 46 insertions(+), 34 deletions(-) diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c index 9e368091f79..886cbbcf3ee 100644 --- a/drivers/watchdog/wafer5823wdt.c +++ b/drivers/watchdog/wafer5823wdt.c @@ -36,8 +36,8 @@ #include #include #include -#include -#include +#include +#include #define WATCHDOG_NAME "Wafer 5823 WDT" #define PFX WATCHDOG_NAME ": " @@ -61,11 +61,15 @@ static int wdt_start = 0x443; static int timeout = WD_TIMO; /* in seconds */ module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WD_TIMO) "."); +MODULE_PARM_DESC(timeout, + "Watchdog timeout in seconds. 1 <= timeout <= 255, default=" + __MODULE_STRING(WD_TIMO) "."); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); static void wafwdt_ping(void) { @@ -90,7 +94,8 @@ wafwdt_stop(void) inb_p(wdt_stop); } -static ssize_t wafwdt_write(struct file *file, const char __user *buf, size_t count, loff_t * ppos) +static ssize_t wafwdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { /* See if we got the magic character 'V' and reload the timer */ if (count) { @@ -100,7 +105,8 @@ static ssize_t wafwdt_write(struct file *file, const char __user *buf, size_t co /* In case it was set long ago */ expect_close = 0; - /* scan to see whether or not we got the magic character */ + /* scan to see whether or not we got the magic + character */ for (i = 0; i != count; i++) { char c; if (get_user(c, buf + i)) @@ -109,27 +115,29 @@ static ssize_t wafwdt_write(struct file *file, const char __user *buf, size_t co expect_close = 42; } } - /* Well, anyhow someone wrote to us, we should return that favour */ + /* Well, anyhow someone wrote to us, we should + return that favour */ wafwdt_ping(); } return count; } -static int wafwdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wafwdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_timeout; void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = "Wafer 5823 WDT", }; switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof (ident))) + if (copy_to_user(argp, &ident, sizeof(ident))) return -EFAULT; break; @@ -194,10 +202,11 @@ static int wafwdt_open(struct inode *inode, struct file *file) static int wafwdt_close(struct inode *inode, struct file *file) { - if (expect_close == 42) { + if (expect_close == 42) wafwdt_stop(); - } else { - printk(KERN_CRIT PFX "WDT device closed unexpectedly. WDT will not stop!\n"); + else { + printk(KERN_CRIT PFX + "WDT device closed unexpectedly. WDT will not stop!\n"); wafwdt_ping(); } clear_bit(0, &wafwdt_is_open); @@ -209,12 +218,11 @@ wafwdt_close(struct inode *inode, struct file *file) * Notifier for system down */ -static int wafwdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +static int wafwdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) { - if (code == SYS_DOWN || code == SYS_HALT) { - /* Turn the WDT off */ + if (code == SYS_DOWN || code == SYS_HALT) wafwdt_stop(); - } return NOTIFY_DONE; } @@ -226,7 +234,7 @@ static const struct file_operations wafwdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wafwdt_write, - .ioctl = wafwdt_ioctl, + .unlocked_ioctl = wafwdt_ioctl, .open = wafwdt_open, .release = wafwdt_close, }; @@ -250,25 +258,28 @@ static int __init wafwdt_init(void) { int ret; - printk(KERN_INFO "WDT driver for Wafer 5823 single board computer initialising.\n"); + printk(KERN_INFO + "WDT driver for Wafer 5823 single board computer initialising.\n"); if (timeout < 1 || timeout > 255) { timeout = WD_TIMO; - printk (KERN_INFO PFX "timeout value must be 1<=x<=255, using %d\n", - timeout); + printk(KERN_INFO PFX + "timeout value must be 1 <= x <= 255, using %d\n", + timeout); } if (wdt_stop != wdt_start) { - if(!request_region(wdt_stop, 1, "Wafer 5823 WDT")) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", - wdt_stop); + if (!request_region(wdt_stop, 1, "Wafer 5823 WDT")) { + printk(KERN_ERR PFX + "I/O address 0x%04x already in use\n", + wdt_stop); ret = -EIO; goto error; } } - if(!request_region(wdt_start, 1, "Wafer 5823 WDT")) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", + if (!request_region(wdt_start, 1, "Wafer 5823 WDT")) { + printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", wdt_start); ret = -EIO; goto error2; @@ -276,19 +287,20 @@ static int __init wafwdt_init(void) ret = register_reboot_notifier(&wafwdt_notifier); if (ret != 0) { - printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", - ret); + printk(KERN_ERR PFX + "cannot register reboot notifier (err=%d)\n", ret); goto error3; } ret = misc_register(&wafwdt_miscdev); if (ret != 0) { - printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); + printk(KERN_ERR PFX + "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto error4; } - printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", + printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", timeout, nowayout); return ret; @@ -307,7 +319,7 @@ static void __exit wafwdt_exit(void) { misc_deregister(&wafwdt_miscdev); unregister_reboot_notifier(&wafwdt_notifier); - if(wdt_stop != wdt_start) + if (wdt_stop != wdt_start) release_region(wdt_stop, 1); release_region(wdt_start, 1); } -- GitLab From dae67a2835149e6518a78c5cf37d6de715c214fc Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:45 +0100 Subject: [PATCH 0060/1024] [WATCHDOG 54/57] wdrtas: clean up, coding style, switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/wdrtas.c | 103 +++++++++++++++----------------------- 1 file changed, 41 insertions(+), 62 deletions(-) diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c index 1d64e277567..20fd6715f25 100644 --- a/drivers/watchdog/wdrtas.c +++ b/drivers/watchdog/wdrtas.c @@ -35,9 +35,9 @@ #include #include #include +#include #include -#include #define WDRTAS_MAGIC_CHAR 42 #define WDRTAS_SUPPORTED_MASK (WDIOF_SETTIMEOUT | \ @@ -56,7 +56,7 @@ static int wdrtas_nowayout = 0; #endif static atomic_t wdrtas_miscdev_open = ATOMIC_INIT(0); -static char wdrtas_expect_close = 0; +static char wdrtas_expect_close; static int wdrtas_interval; @@ -86,8 +86,8 @@ static char wdrtas_logbuffer[WDRTAS_LOGBUFFER_LEN]; * RTAS function set-indicator (surveillance). The unit of interval is * seconds. */ -static int -wdrtas_set_interval(int interval) + +static int wdrtas_set_interval(int interval) { long result; static int print_msg = 10; @@ -97,7 +97,7 @@ wdrtas_set_interval(int interval) result = rtas_call(wdrtas_token_set_indicator, 3, 1, NULL, WDRTAS_SURVEILLANCE_IND, 0, interval); - if ( (result < 0) && (print_msg) ) { + if (result < 0 && print_msg) { printk(KERN_ERR "wdrtas: setting the watchdog to %i " "timeout failed: %li\n", interval, result); print_msg--; @@ -116,16 +116,14 @@ wdrtas_set_interval(int interval) * as reported by the RTAS function ibm,get-system-parameter. The unit * of the return value is seconds. */ -static int -wdrtas_get_interval(int fallback_value) +static int wdrtas_get_interval(int fallback_value) { long result; char value[4]; result = rtas_call(wdrtas_token_get_sp, 3, 1, NULL, WDRTAS_SP_SPI, (void *)__pa(&value), 4); - if ( (value[0] != 0) || (value[1] != 2) || (value[3] != 0) || - (result < 0) ) { + if (value[0] != 0 || value[1] != 2 || value[3] != 0 || result < 0) { printk(KERN_WARNING "wdrtas: could not get sp_spi watchdog " "timeout (%li). Continuing\n", result); return fallback_value; @@ -141,8 +139,7 @@ wdrtas_get_interval(int fallback_value) * wdrtas_timer_start starts the watchdog by calling the RTAS function * set-interval (surveillance) */ -static void -wdrtas_timer_start(void) +static void wdrtas_timer_start(void) { wdrtas_set_interval(wdrtas_interval); } @@ -153,8 +150,7 @@ wdrtas_timer_start(void) * wdrtas_timer_stop stops the watchdog timer by calling the RTAS function * set-interval (surveillance) */ -static void -wdrtas_timer_stop(void) +static void wdrtas_timer_stop(void) { wdrtas_set_interval(0); } @@ -165,8 +161,7 @@ wdrtas_timer_stop(void) * wdrtas_log_scanned_event prints a message to the log buffer dumping * the results of the last event-scan call */ -static void -wdrtas_log_scanned_event(void) +static void wdrtas_log_scanned_event(void) { int i; @@ -175,13 +170,13 @@ wdrtas_log_scanned_event(void) "%02x %02x %02x %02x %02x %02x %02x %02x " "%02x %02x %02x %02x %02x %02x %02x %02x\n", (i / 16) + 1, (WDRTAS_LOGBUFFER_LEN / 16), - wdrtas_logbuffer[i + 0], wdrtas_logbuffer[i + 1], - wdrtas_logbuffer[i + 2], wdrtas_logbuffer[i + 3], - wdrtas_logbuffer[i + 4], wdrtas_logbuffer[i + 5], - wdrtas_logbuffer[i + 6], wdrtas_logbuffer[i + 7], - wdrtas_logbuffer[i + 8], wdrtas_logbuffer[i + 9], - wdrtas_logbuffer[i + 10], wdrtas_logbuffer[i + 11], - wdrtas_logbuffer[i + 12], wdrtas_logbuffer[i + 13], + wdrtas_logbuffer[i + 0], wdrtas_logbuffer[i + 1], + wdrtas_logbuffer[i + 2], wdrtas_logbuffer[i + 3], + wdrtas_logbuffer[i + 4], wdrtas_logbuffer[i + 5], + wdrtas_logbuffer[i + 6], wdrtas_logbuffer[i + 7], + wdrtas_logbuffer[i + 8], wdrtas_logbuffer[i + 9], + wdrtas_logbuffer[i + 10], wdrtas_logbuffer[i + 11], + wdrtas_logbuffer[i + 12], wdrtas_logbuffer[i + 13], wdrtas_logbuffer[i + 14], wdrtas_logbuffer[i + 15]); } @@ -192,8 +187,7 @@ wdrtas_log_scanned_event(void) * RTAS function event-scan and repeats these calls as long as there are * events available. All events will be dumped. */ -static void -wdrtas_timer_keepalive(void) +static void wdrtas_timer_keepalive(void) { long result; @@ -218,8 +212,7 @@ wdrtas_timer_keepalive(void) * wdrtas_get_temperature returns the current temperature in Fahrenheit. It * uses the RTAS call get-sensor-state, token 3 to do so */ -static int -wdrtas_get_temperature(void) +static int wdrtas_get_temperature(void) { long result; int temperature = 0; @@ -243,8 +236,7 @@ wdrtas_get_temperature(void) * returns a bitmask of defines WDIOF_... as defined in * include/linux/watchdog.h */ -static int -wdrtas_get_status(void) +static int wdrtas_get_status(void) { return 0; /* TODO */ } @@ -255,8 +247,7 @@ wdrtas_get_status(void) * returns a bitmask of defines WDIOF_... as defined in * include/linux/watchdog.h, indicating why the watchdog rebooted the system */ -static int -wdrtas_get_boot_status(void) +static int wdrtas_get_boot_status(void) { return 0; /* TODO */ } @@ -276,8 +267,7 @@ wdrtas_get_boot_status(void) * character 'V'. This character allows the watchdog device to be closed * properly. */ -static ssize_t -wdrtas_write(struct file *file, const char __user *buf, +static ssize_t wdrtas_write(struct file *file, const char __user *buf, size_t len, loff_t *ppos) { int i; @@ -306,7 +296,6 @@ out: /** * wdrtas_ioctl - ioctl function for the watchdog device - * @inode: inode structure * @file: file structure * @cmd: command for ioctl * @arg: argument pointer @@ -315,9 +304,9 @@ out: * * wdrtas_ioctl implements the watchdog API ioctls */ -static int -wdrtas_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) + +static long wdrtas_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int __user *argp = (void __user *)arg; int i; @@ -357,9 +346,9 @@ wdrtas_ioctl(struct inode *inode, struct file *file, wdrtas_timer_keepalive(); wdrtas_timer_start(); } + /* not implemented. Done by H8 if (i & WDIOS_TEMPPANIC) { - /* not implemented. Done by H8 */ - } + } */ return 0; case WDIOC_KEEPALIVE: @@ -399,8 +388,7 @@ wdrtas_ioctl(struct inode *inode, struct file *file, * * function called when watchdog device is opened */ -static int -wdrtas_open(struct inode *inode, struct file *file) +static int wdrtas_open(struct inode *inode, struct file *file) { /* only open once */ if (atomic_inc_return(&wdrtas_miscdev_open) > 1) { @@ -423,8 +411,7 @@ wdrtas_open(struct inode *inode, struct file *file) * * close function. Always succeeds */ -static int -wdrtas_close(struct inode *inode, struct file *file) +static int wdrtas_close(struct inode *inode, struct file *file) { /* only stop watchdog, if this was announced using 'V' before */ if (wdrtas_expect_close == WDRTAS_MAGIC_CHAR) @@ -453,8 +440,7 @@ wdrtas_close(struct inode *inode, struct file *file) * wdrtas_temp_read gives the temperature to the users by copying this * value as one byte into the user space buffer. The unit is Fahrenheit... */ -static ssize_t -wdrtas_temp_read(struct file *file, char __user *buf, +static ssize_t wdrtas_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { int temperature = 0; @@ -478,8 +464,7 @@ wdrtas_temp_read(struct file *file, char __user *buf, * * function called when temperature device is opened */ -static int -wdrtas_temp_open(struct inode *inode, struct file *file) +static int wdrtas_temp_open(struct inode *inode, struct file *file) { return nonseekable_open(inode, file); } @@ -493,8 +478,7 @@ wdrtas_temp_open(struct inode *inode, struct file *file) * * close function. Always succeeds */ -static int -wdrtas_temp_close(struct inode *inode, struct file *file) +static int wdrtas_temp_close(struct inode *inode, struct file *file) { return 0; } @@ -509,10 +493,10 @@ wdrtas_temp_close(struct inode *inode, struct file *file) * * wdrtas_reboot stops the watchdog in case of a reboot */ -static int -wdrtas_reboot(struct notifier_block *this, unsigned long code, void *ptr) +static int wdrtas_reboot(struct notifier_block *this, + unsigned long code, void *ptr) { - if ( (code==SYS_DOWN) || (code==SYS_HALT) ) + if (code == SYS_DOWN || code == SYS_HALT) wdrtas_timer_stop(); return NOTIFY_DONE; @@ -524,7 +508,7 @@ static const struct file_operations wdrtas_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdrtas_write, - .ioctl = wdrtas_ioctl, + .unlocked_ioctl = wdrtas_ioctl, .open = wdrtas_open, .release = wdrtas_close, }; @@ -562,8 +546,7 @@ static struct notifier_block wdrtas_notifier = { * this watchdog driver. It tolerates, if "get-sensor-state" and * "ibm,get-system-parameter" are not available. */ -static int -wdrtas_get_tokens(void) +static int wdrtas_get_tokens(void) { wdrtas_token_get_sensor_state = rtas_token("get-sensor-state"); if (wdrtas_token_get_sensor_state == RTAS_UNKNOWN_SERVICE) { @@ -603,8 +586,7 @@ wdrtas_get_tokens(void) * wdrtas_register_devs unregisters the watchdog and temperature watchdog * misc devs */ -static void -wdrtas_unregister_devs(void) +static void wdrtas_unregister_devs(void) { misc_deregister(&wdrtas_miscdev); if (wdrtas_token_get_sensor_state != RTAS_UNKNOWN_SERVICE) @@ -619,8 +601,7 @@ wdrtas_unregister_devs(void) * wdrtas_register_devs registers the watchdog and temperature watchdog * misc devs */ -static int -wdrtas_register_devs(void) +static int wdrtas_register_devs(void) { int result; @@ -651,8 +632,7 @@ wdrtas_register_devs(void) * * registers the file handlers and the reboot notifier */ -static int __init -wdrtas_init(void) +static int __init wdrtas_init(void) { if (wdrtas_get_tokens()) return -ENODEV; @@ -680,8 +660,7 @@ wdrtas_init(void) * * unregisters the file handlers and the reboot notifier */ -static void __exit -wdrtas_exit(void) +static void __exit wdrtas_exit(void) { if (!wdrtas_nowayout) wdrtas_timer_stop(); -- GitLab From d0e58eed05f9baf77c4f75e794ae245f6dae240a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:51 +0100 Subject: [PATCH 0061/1024] [WATCHDOG 55/57] wdt285: switch to unlocked_ioctl and tidy up oddments of coding style Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/wdt285.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c index e4cf661dc89..fea398a4ca3 100644 --- a/drivers/watchdog/wdt285.c +++ b/drivers/watchdog/wdt285.c @@ -26,9 +26,9 @@ #include #include #include +#include +#include -#include -#include #include #include #include @@ -115,8 +115,8 @@ static int watchdog_release(struct inode *inode, struct file *file) return 0; } -static ssize_t -watchdog_write(struct file *file, const char *data, size_t len, loff_t *ppos) +static ssize_t watchdog_write(struct file *file, const char *data, + size_t len, loff_t *ppos) { /* * Refresh the timer. @@ -127,19 +127,18 @@ watchdog_write(struct file *file, const char *data, size_t len, loff_t *ppos) return len; } -static struct watchdog_info ident = { +static const struct watchdog_info ident = { .options = WDIOF_SETTIMEOUT, .identity = "Footbridge Watchdog", }; -static int -watchdog_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long watchdog_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { unsigned int new_margin; int ret = -ENOTTY; - switch(cmd) { + switch (cmd) { case WDIOC_GETSUPPORT: ret = 0; if (copy_to_user((void *)arg, &ident, sizeof(ident))) @@ -148,7 +147,7 @@ watchdog_ioctl(struct inode *inode, struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - ret = put_user(0,(int *)arg); + ret = put_user(0, (int *)arg); break; case WDIOC_KEEPALIVE: @@ -182,7 +181,7 @@ static const struct file_operations watchdog_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = watchdog_write, - .ioctl = watchdog_ioctl, + .unlocked_ioctl = watchdog_ioctl, .open = watchdog_open, .release = watchdog_release, }; @@ -204,11 +203,13 @@ static int __init footbridge_watchdog_init(void) if (retval < 0) return retval; - printk("Footbridge Watchdog Timer: 0.01, timer margin: %d sec\n", - soft_margin); + printk(KERN_INFO + "Footbridge Watchdog Timer: 0.01, timer margin: %d sec\n", + soft_margin); if (machine_is_cats()) - printk("Warning: Watchdog reset may not work on this machine.\n"); + printk(KERN_WARN + "Warning: Watchdog reset may not work on this machine.\n"); return 0; } @@ -223,7 +224,7 @@ MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); module_param(soft_margin, int, 0); -MODULE_PARM_DESC(soft_margin,"Watchdog timeout in seconds"); +MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds"); module_init(footbridge_watchdog_init); module_exit(footbridge_watchdog_exit); -- GitLab From f2b79c6ede54cf07355ac8d8f3044d682cd0c5ca Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 19 May 2008 14:09:57 +0100 Subject: [PATCH 0062/1024] [WATCHDOG 56/57] wdt977: clean up, coding style and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/wdt977.c | 148 +++++++++++++++++++------------------- 1 file changed, 74 insertions(+), 74 deletions(-) diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c index fb4b876c9fd..bdc28e522f0 100644 --- a/drivers/watchdog/wdt977.c +++ b/drivers/watchdog/wdt977.c @@ -19,7 +19,8 @@ * 07-Jul-2003 Daniele Bellucci: Audit return code of misc_register in * nwwatchdog_init. * 25-Oct-2005 Woody Suwalski: Convert addresses to #defs, add spinlocks - * remove limitiation to be used on Netwinders only + * remove limitiation to be used on + * Netwinders only */ #include @@ -33,11 +34,11 @@ #include #include #include +#include +#include -#include #include #include -#include #define WATCHDOG_VERSION "0.04" #define WATCHDOG_NAME "Wdt977" @@ -45,7 +46,7 @@ #define DRIVER_VERSION WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n" #define IO_INDEX_PORT 0x370 /* on some systems it can be 0x3F0 */ -#define IO_DATA_PORT (IO_INDEX_PORT+1) +#define IO_DATA_PORT (IO_INDEX_PORT + 1) #define UNLOCK_DATA 0x87 #define LOCK_DATA 0xAA @@ -62,13 +63,16 @@ static char expect_close; static DEFINE_SPINLOCK(spinlock); module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (60..15300), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")"); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (60..15300), default=" + __MODULE_STRING(DEFAULT_TIMEOUT) ")"); module_param(testmode, int, 0); -MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0"); +MODULE_PARM_DESC(testmode, "Watchdog testmode (1 = no reboot), default=0"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* * Start the watchdog @@ -95,14 +99,16 @@ static int wdt977_start(void) outb_p(0xF2, IO_INDEX_PORT); outb_p(timeoutM, IO_DATA_PORT); outb_p(0xF3, IO_INDEX_PORT); - outb_p(0x00, IO_DATA_PORT); /* another setting is 0E for kbd/mouse/LED */ + outb_p(0x00, IO_DATA_PORT); /* another setting is 0E for + kbd/mouse/LED */ outb_p(0xF4, IO_INDEX_PORT); outb_p(0x00, IO_DATA_PORT); - /* at last select device Aux1 (dev=7) and set GP16 as a watchdog output */ - /* in test mode watch the bit 1 on F4 to indicate "triggered" */ - if (!testmode) - { + /* At last select device Aux1 (dev=7) and set GP16 as a + * watchdog output. In test mode watch the bit 1 on F4 to + * indicate "triggered" + */ + if (!testmode) { outb_p(DEVICE_REGISTER, IO_INDEX_PORT); outb_p(0x07, IO_DATA_PORT); outb_p(0xE6, IO_INDEX_PORT); @@ -147,7 +153,8 @@ static int wdt977_stop(void) outb_p(0xF2, IO_INDEX_PORT); outb_p(0x00, IO_DATA_PORT); - /* at last select device Aux1 (dev=7) and set GP16 as a watchdog output */ + /* at last select device Aux1 (dev=7) and set + GP16 as a watchdog output */ outb_p(DEVICE_REGISTER, IO_INDEX_PORT); outb_p(0x07, IO_DATA_PORT); outb_p(0xE6, IO_INDEX_PORT); @@ -202,16 +209,18 @@ static int wdt977_set_timeout(int t) tmrval = (t + 59) / 60; if (machine_is_netwinder()) { - /* we have a hw bug somewhere, so each 977 minute is actually only 30sec - * this limits the max timeout to half of device max of 255 minutes... + /* we have a hw bug somewhere, so each 977 minute is actually + * only 30sec. This limits the max timeout to half of device + * max of 255 minutes... */ tmrval += tmrval; } - if ((tmrval < 1) || (tmrval > 255)) + if (tmrval < 1 || tmrval > 255) return -EINVAL; - /* timeout is the timeout in seconds, timeoutM is the timeout in minutes) */ + /* timeout is the timeout in seconds, timeoutM is + the timeout in minutes) */ timeout = t; timeoutM = tmrval; return 0; @@ -243,7 +252,7 @@ static int wdt977_get_status(int *status) spin_unlock_irqrestore(&spinlock, flags); - *status=0; + *status = 0; if (new_status & 1) *status |= WDIOF_CARDRESET; @@ -258,7 +267,7 @@ static int wdt977_get_status(int *status) static int wdt977_open(struct inode *inode, struct file *file) { /* If the watchdog is alive we don't need to start it again */ - if( test_and_set_bit(0,&timer_alive) ) + if (test_and_set_bit(0, &timer_alive)) return -EBUSY; if (nowayout) @@ -274,13 +283,13 @@ static int wdt977_release(struct inode *inode, struct file *file) * Shut off the timer. * Lock it in if it's a module and we set nowayout */ - if (expect_close == 42) - { + if (expect_close == 42) { wdt977_stop(); - clear_bit(0,&timer_alive); + clear_bit(0, &timer_alive); } else { wdt977_keepalive(); - printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + printk(KERN_CRIT PFX + "Unexpected close, not stopping watchdog!\n"); } expect_close = 0; return 0; @@ -301,17 +310,14 @@ static int wdt977_release(struct inode *inode, struct file *file) static ssize_t wdt977_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { - if (count) - { - if (!nowayout) - { + if (count) { + if (!nowayout) { size_t i; /* In case it was set long ago */ expect_close = 0; - for (i = 0; i != count; i++) - { + for (i = 0; i != count; i++) { char c; if (get_user(c, buf + i)) return -EFAULT; @@ -326,6 +332,14 @@ static ssize_t wdt977_write(struct file *file, const char __user *buf, return count; } +static const struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .firmware_version = 1, + .identity = WATCHDOG_NAME, +}; + /* * wdt977_ioctl: * @inode: inode of the device @@ -337,16 +351,8 @@ static ssize_t wdt977_write(struct file *file, const char __user *buf, * according to their available features. */ -static struct watchdog_info ident = { - .options = WDIOF_SETTIMEOUT | - WDIOF_MAGICCLOSE | - WDIOF_KEEPALIVEPING, - .firmware_version = 1, - .identity = WATCHDOG_NAME, -}; - -static int wdt977_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long wdt977_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int status; int new_options, retval = -EINVAL; @@ -358,8 +364,7 @@ static int wdt977_ioctl(struct inode *inode, struct file *file, uarg.i = (int __user *)arg; - switch(cmd) - { + switch (cmd) { default: return -ENOTTY; @@ -379,7 +384,7 @@ static int wdt977_ioctl(struct inode *inode, struct file *file, return 0; case WDIOC_SETOPTIONS: - if (get_user (new_options, uarg.i)) + if (get_user(new_options, uarg.i)) return -EFAULT; if (new_options & WDIOS_DISABLECARD) { @@ -413,23 +418,21 @@ static int wdt977_ioctl(struct inode *inode, struct file *file, static int wdt977_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if(code==SYS_DOWN || code==SYS_HALT) + if (code == SYS_DOWN || code == SYS_HALT) wdt977_stop(); return NOTIFY_DONE; } -static const struct file_operations wdt977_fops= -{ +static const struct file_operations wdt977_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdt977_write, - .ioctl = wdt977_ioctl, + .unlocked_ioctl = wdt977_ioctl, .open = wdt977_open, .release = wdt977_release, }; -static struct miscdevice wdt977_miscdev= -{ +static struct miscdevice wdt977_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &wdt977_fops, @@ -443,51 +446,48 @@ static int __init wd977_init(void) { int rc; - //if (!machine_is_netwinder()) - // return -ENODEV; - printk(KERN_INFO PFX DRIVER_VERSION); - /* Check that the timeout value is within it's range ; if not reset to the default */ - if (wdt977_set_timeout(timeout)) - { + /* Check that the timeout value is within its range; + if not reset to the default */ + if (wdt977_set_timeout(timeout)) { wdt977_set_timeout(DEFAULT_TIMEOUT); - printk(KERN_INFO PFX "timeout value must be 60 Date: Mon, 19 May 2008 14:10:02 +0100 Subject: [PATCH 0063/1024] [WATCHDOG 57/57] wdt501/pci: Clean up, coding style and switch to unlocked_ioctl Review and switch to unlocked_ioctl Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/wdt.c | 176 ++++++++++++---------- drivers/watchdog/wdt_pci.c | 300 +++++++++++++++++++++---------------- 2 files changed, 265 insertions(+), 211 deletions(-) diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c index 756fb15fdce..53a6b18bcb9 100644 --- a/drivers/watchdog/wdt.c +++ b/drivers/watchdog/wdt.c @@ -24,9 +24,10 @@ * Matt Crocker). * Alan Cox : Added wdt= boot option * Alan Cox : Cleaned up copy/user stuff - * Tim Hockin : Added insmod parameters, comment cleanup - * Parameterized timeout - * Tigran Aivazian : Restructured wdt_init() to handle failures + * Tim Hockin : Added insmod parameters, comment + * cleanup, parameterized timeout + * Tigran Aivazian : Restructured wdt_init() to handle + * failures * Joel Becker : Added WDIOC_GET/SETTIMEOUT * Matt Domsch : Added nowayout module option */ @@ -42,9 +43,9 @@ #include #include #include +#include +#include -#include -#include #include #include "wd501p.h" @@ -60,15 +61,19 @@ static char expect_close; static int heartbeat = WD_TIMO; static int wd_heartbeat; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0 65535)) + if (t < 1 || t > 65535) return -EINVAL; heartbeat = t; @@ -200,7 +211,7 @@ static int wdt_get_status(int *status) new_status = inb_p(WDT_SR); spin_unlock_irqrestore(&wdt_lock, flags); - *status=0; + *status = 0; if (new_status & WDC_SR_ISOI0) *status |= WDIOF_EXTERN1; if (new_status & WDC_SR_ISII1) @@ -266,7 +277,7 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id) #ifdef CONFIG_WDT_501 if (!(status & WDC_SR_TGOOD)) - printk(KERN_CRIT "Overheat alarm.(%d)\n",inb_p(WDT_RT)); + printk(KERN_CRIT "Overheat alarm.(%d)\n", inb_p(WDT_RT)); if (!(status & WDC_SR_PSUOVER)) printk(KERN_CRIT "PSU over voltage.\n"); if (!(status & WDC_SR_PSUUNDR)) @@ -304,9 +315,10 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id) * write of data will do, as we we don't define content meaning. */ -static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { - if(count) { + if (count) { if (!nowayout) { size_t i; @@ -328,7 +340,6 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count /** * wdt_ioctl: - * @inode: inode of the device * @file: file handle to the device * @cmd: watchdog command * @arg: argument pointer @@ -338,8 +349,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count * querying capabilities and current status. */ -static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -362,32 +372,28 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, ident.options |= WDIOF_FANFAULT; #endif /* CONFIG_WDT_501 */ - switch(cmd) - { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - - case WDIOC_GETSTATUS: - wdt_get_status(&status); - return put_user(status, p); - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_ping(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_heartbeat, p)) - return -EFAULT; - - if (wdt_set_heartbeat(new_heartbeat)) - return -EINVAL; - - wdt_ping(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, p); + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + wdt_get_status(&status); + return put_user(status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdt_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_heartbeat)) + return -EINVAL; + wdt_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); } } @@ -405,7 +411,7 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, static int wdt_open(struct inode *inode, struct file *file) { - if(test_and_set_bit(0, &wdt_is_open)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; /* * Activate @@ -432,7 +438,8 @@ static int wdt_release(struct inode *inode, struct file *file) wdt_stop(); clear_bit(0, &wdt_is_open); } else { - printk(KERN_CRIT "wdt: WDT device closed unexpectedly. WDT will not stop!\n"); + printk(KERN_CRIT + "wdt: WDT device closed unexpectedly. WDT will not stop!\n"); wdt_ping(); } expect_close = 0; @@ -451,14 +458,15 @@ static int wdt_release(struct inode *inode, struct file *file) * farenheit. It was designed by an imperial measurement luddite. */ -static ssize_t wdt_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr) +static ssize_t wdt_temp_read(struct file *file, char __user *buf, + size_t count, loff_t *ptr) { int temperature; if (wdt_get_temperature(&temperature)) return -EFAULT; - if (copy_to_user (buf, &temperature, 1)) + if (copy_to_user(buf, &temperature, 1)) return -EFAULT; return 1; @@ -506,10 +514,8 @@ static int wdt_temp_release(struct inode *inode, struct file *file) static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if(code==SYS_DOWN || code==SYS_HALT) { - /* Turn the card off */ + if (code == SYS_DOWN || code == SYS_HALT) wdt_stop(); - } return NOTIFY_DONE; } @@ -522,7 +528,7 @@ static const struct file_operations wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdt_write, - .ioctl = wdt_ioctl, + .unlocked_ioctl = wdt_ioctl, .open = wdt_open, .release = wdt_release, }; @@ -576,7 +582,7 @@ static void __exit wdt_exit(void) #endif /* CONFIG_WDT_501 */ unregister_reboot_notifier(&wdt_notifier); free_irq(irq, NULL); - release_region(io,8); + release_region(io, 8); } /** @@ -591,44 +597,49 @@ static int __init wdt_init(void) { int ret; - /* Check that the heartbeat value is within it's range ; if not reset to the default */ + /* Check that the heartbeat value is within it's range; + if not reset to the default */ if (wdt_set_heartbeat(heartbeat)) { wdt_set_heartbeat(WD_TIMO); - printk(KERN_INFO "wdt: heartbeat value must be 0 #include #include +#include +#include -#include -#include #include #define WDT_IS_PCI @@ -73,7 +75,7 @@ /* We can only use 1 card due to the /dev/watchdog restriction */ static int dev_count; -static struct semaphore open_sem; +static unsigned long open_lock; static DEFINE_SPINLOCK(wdtpci_lock); static char expect_close; @@ -86,18 +88,23 @@ static int irq; static int heartbeat = WD_TIMO; static int wd_heartbeat; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0>8, WDT_COUNT0+ctr); + outb(val & 0xFF, WDT_COUNT0 + ctr); + udelay(8); + outb(val >> 8, WDT_COUNT0 + ctr); + udelay(8); } /** @@ -134,23 +144,35 @@ static int wdtpci_start(void) * "pet" the watchdog, as Access says. * This resets the clock outputs. */ - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_mode(2,0); /* Program CTR2 for Mode 0: Pulse on Terminal Count */ - outb_p(0, WDT_DC); /* Enable watchdog */ - - inb_p(WDT_DC); /* Disable watchdog */ - outb_p(0, WDT_CLOCK); /* 2.0833MHz clock */ - inb_p(WDT_BUZZER); /* disable */ - inb_p(WDT_OPTONOTRST); /* disable */ - inb_p(WDT_OPTORST); /* disable */ - inb_p(WDT_PROGOUT); /* disable */ - wdtpci_ctr_mode(0,3); /* Program CTR0 for Mode 3: Square Wave Generator */ - wdtpci_ctr_mode(1,2); /* Program CTR1 for Mode 2: Rate Generator */ - wdtpci_ctr_mode(2,1); /* Program CTR2 for Mode 1: Retriggerable One-Shot */ - wdtpci_ctr_load(0,20833); /* count at 100Hz */ - wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_mode(2, 0); /* Program CTR2 for Mode 0: + Pulse on Terminal Count */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + outb(0, WDT_CLOCK); /* 2.0833MHz clock */ + udelay(8); + inb(WDT_BUZZER); /* disable */ + udelay(8); + inb(WDT_OPTONOTRST); /* disable */ + udelay(8); + inb(WDT_OPTORST); /* disable */ + udelay(8); + inb(WDT_PROGOUT); /* disable */ + udelay(8); + wdtpci_ctr_mode(0, 3); /* Program CTR0 for Mode 3: + Square Wave Generator */ + wdtpci_ctr_mode(1, 2); /* Program CTR1 for Mode 2: + Rate Generator */ + wdtpci_ctr_mode(2, 1); /* Program CTR2 for Mode 1: + Retriggerable One-Shot */ + wdtpci_ctr_load(0, 20833); /* count at 100Hz */ + wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */ /* DO NOT LOAD CTR2 on PCI card! -- JPN */ - outb_p(0, WDT_DC); /* Enable watchdog */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; @@ -162,14 +184,15 @@ static int wdtpci_start(void) * Stop the watchdog driver. */ -static int wdtpci_stop (void) +static int wdtpci_stop(void) { unsigned long flags; /* Turn the card off */ spin_lock_irqsave(&wdtpci_lock, flags); - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_load(2,0); /* 0 length reset pulses now */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_load(2, 0); /* 0 length reset pulses now */ spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; } @@ -177,20 +200,23 @@ static int wdtpci_stop (void) /** * wdtpci_ping: * - * Reload counter one with the watchdog heartbeat. We don't bother reloading - * the cascade counter. + * Reload counter one with the watchdog heartbeat. We don't bother + * reloading the cascade counter. */ static int wdtpci_ping(void) { unsigned long flags; - /* Write a watchdog value */ spin_lock_irqsave(&wdtpci_lock, flags); - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_mode(1,2); /* Re-Program CTR1 for Mode 2: Rate Generator */ - wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */ - outb_p(0, WDT_DC); /* Enable watchdog */ + /* Write a watchdog value */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_mode(1, 2); /* Re-Program CTR1 for Mode 2: + Rate Generator */ + wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; } @@ -199,14 +225,14 @@ static int wdtpci_ping(void) * wdtpci_set_heartbeat: * @t: the new heartbeat value that needs to be set. * - * Set a new heartbeat value for the watchdog device. If the heartbeat value is - * incorrect we keep the old value and return -EINVAL. If successfull we - * return 0. + * Set a new heartbeat value for the watchdog device. If the heartbeat + * value is incorrect we keep the old value and return -EINVAL. + * If successful we return 0. */ static int wdtpci_set_heartbeat(int t) { /* Arbitrary, can't find the card's limits */ - if ((t < 1) || (t > 65535)) + if (t < 1 || t > 65535) return -EINVAL; heartbeat = t; @@ -227,9 +253,14 @@ static int wdtpci_set_heartbeat(int t) static int wdtpci_get_status(int *status) { - unsigned char new_status=inb_p(WDT_SR); + unsigned char new_status; + unsigned long flags; + + spin_lock_irqsave(&wdtpci_lock, flags); + new_status = inb(WDT_SR); + spin_unlock_irqrestore(&wdtpci_lock, flags); - *status=0; + *status = 0; if (new_status & WDC_SR_ISOI0) *status |= WDIOF_EXTERN1; if (new_status & WDC_SR_ISII1) @@ -259,8 +290,12 @@ static int wdtpci_get_status(int *status) static int wdtpci_get_temperature(int *temperature) { - unsigned short c=inb_p(WDT_RT); - + unsigned short c; + unsigned long flags; + spin_lock_irqsave(&wdtpci_lock, flags); + c = inb(WDT_RT); + udelay(8); + spin_unlock_irqrestore(&wdtpci_lock, flags); *temperature = (c * 11 / 15) + 7; return 0; } @@ -282,17 +317,25 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) * Read the status register see what is up and * then printk it. */ - unsigned char status=inb_p(WDT_SR); + unsigned char status; + + spin_lock(&wdtpci_lock); + + status = inb(WDT_SR); + udelay(8); printk(KERN_CRIT PFX "status %d\n", status); #ifdef CONFIG_WDT_501_PCI - if (!(status & WDC_SR_TGOOD)) - printk(KERN_CRIT PFX "Overheat alarm.(%d)\n",inb_p(WDT_RT)); + if (!(status & WDC_SR_TGOOD)) { + u8 alarm = inb(WDT_RT); + printk(KERN_CRIT PFX "Overheat alarm.(%d)\n", alarm); + udelay(8); + } if (!(status & WDC_SR_PSUOVER)) - printk(KERN_CRIT PFX "PSU over voltage.\n"); + printk(KERN_CRIT PFX "PSU over voltage.\n"); if (!(status & WDC_SR_PSUUNDR)) - printk(KERN_CRIT PFX "PSU under voltage.\n"); + printk(KERN_CRIT PFX "PSU under voltage.\n"); if (tachometer) { if (!(status & WDC_SR_FANGOOD)) printk(KERN_CRIT PFX "Possible fan fault.\n"); @@ -310,6 +353,7 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) printk(KERN_CRIT PFX "Reset in 5ms.\n"); #endif } + spin_unlock(&wdtpci_lock); return IRQ_HANDLED; } @@ -325,7 +369,8 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) * write of data will do, as we we don't define content meaning. */ -static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t wdtpci_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { @@ -335,7 +380,7 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co for (i = 0; i != count; i++) { char c; - if(get_user(c, buf+i)) + if (get_user(c, buf+i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -343,13 +388,11 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co } wdtpci_ping(); } - return count; } /** * wdtpci_ioctl: - * @inode: inode of the device * @file: file handle to the device * @cmd: watchdog command * @arg: argument pointer @@ -359,8 +402,8 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co * querying capabilities and current status. */ -static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wdtpci_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_heartbeat; int status; @@ -383,33 +426,29 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd ident.options |= WDIOF_FANFAULT; #endif /* CONFIG_WDT_501_PCI */ - switch(cmd) - { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - - case WDIOC_GETSTATUS: - wdtpci_get_status(&status); - return put_user(status, p); - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdtpci_ping(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_heartbeat, p)) - return -EFAULT; - - if (wdtpci_set_heartbeat(new_heartbeat)) - return -EINVAL; - - wdtpci_ping(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, p); - } + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + wdtpci_get_status(&status); + return put_user(status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdtpci_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, p)) + return -EFAULT; + if (wdtpci_set_heartbeat(new_heartbeat)) + return -EINVAL; + wdtpci_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); + } } /** @@ -426,12 +465,11 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd static int wdtpci_open(struct inode *inode, struct file *file) { - if (down_trylock(&open_sem)) + if (test_and_set_bit(0, &open_lock)) return -EBUSY; - if (nowayout) { + if (nowayout) __module_get(THIS_MODULE); - } /* * Activate */ @@ -460,7 +498,7 @@ static int wdtpci_release(struct inode *inode, struct file *file) wdtpci_ping(); } expect_close = 0; - up(&open_sem); + clear_bit(0, &open_lock); return 0; } @@ -476,14 +514,15 @@ static int wdtpci_release(struct inode *inode, struct file *file) * fahrenheit. It was designed by an imperial measurement luddite. */ -static ssize_t wdtpci_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr) +static ssize_t wdtpci_temp_read(struct file *file, char __user *buf, + size_t count, loff_t *ptr) { int temperature; if (wdtpci_get_temperature(&temperature)) return -EFAULT; - if (copy_to_user (buf, &temperature, 1)) + if (copy_to_user(buf, &temperature, 1)) return -EFAULT; return 1; @@ -529,12 +568,10 @@ static int wdtpci_temp_release(struct inode *inode, struct file *file) */ static int wdtpci_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) + void *unused) { - if (code==SYS_DOWN || code==SYS_HALT) { - /* Turn the card off */ + if (code == SYS_DOWN || code == SYS_HALT) wdtpci_stop(); - } return NOTIFY_DONE; } @@ -547,7 +584,7 @@ static const struct file_operations wdtpci_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdtpci_write, - .ioctl = wdtpci_ioctl, + .unlocked_ioctl = wdtpci_ioctl, .open = wdtpci_open, .release = wdtpci_release, }; @@ -584,80 +621,85 @@ static struct notifier_block wdtpci_notifier = { }; -static int __devinit wdtpci_init_one (struct pci_dev *dev, - const struct pci_device_id *ent) +static int __devinit wdtpci_init_one(struct pci_dev *dev, + const struct pci_device_id *ent) { int ret = -EIO; dev_count++; if (dev_count > 1) { - printk (KERN_ERR PFX "this driver only supports 1 device\n"); + printk(KERN_ERR PFX "This driver only supports one device\n"); return -ENODEV; } - if (pci_enable_device (dev)) { - printk (KERN_ERR PFX "Not possible to enable PCI Device\n"); + if (pci_enable_device(dev)) { + printk(KERN_ERR PFX "Not possible to enable PCI Device\n"); return -ENODEV; } - if (pci_resource_start (dev, 2) == 0x0000) { - printk (KERN_ERR PFX "No I/O-Address for card detected\n"); + if (pci_resource_start(dev, 2) == 0x0000) { + printk(KERN_ERR PFX "No I/O-Address for card detected\n"); ret = -ENODEV; goto out_pci; } - sema_init(&open_sem, 1); - irq = dev->irq; - io = pci_resource_start (dev, 2); + io = pci_resource_start(dev, 2); - if (request_region (io, 16, "wdt_pci") == NULL) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", io); + if (request_region(io, 16, "wdt_pci") == NULL) { + printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", io); goto out_pci; } - if (request_irq (irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED, + if (request_irq(irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED, "wdt_pci", &wdtpci_miscdev)) { - printk (KERN_ERR PFX "IRQ %d is not free\n", irq); + printk(KERN_ERR PFX "IRQ %d is not free\n", irq); goto out_reg; } - printk ("PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n", - io, irq); + printk(KERN_INFO + "PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n", + io, irq); - /* Check that the heartbeat value is within it's range ; if not reset to the default */ + /* Check that the heartbeat value is within its range; + if not reset to the default */ if (wdtpci_set_heartbeat(heartbeat)) { wdtpci_set_heartbeat(WD_TIMO); - printk(KERN_INFO PFX "heartbeat value must be 0 Date: Tue, 24 Jun 2008 18:51:07 +0400 Subject: [PATCH 0064/1024] power_supply: Sharp SL-6000 (tosa) batteries support This patch adds common battery interface support for Sharp SL-6000 (tosa). Signed-off-by: Dmitry Baryshkov Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 7 + drivers/power/Makefile | 1 + drivers/power/tosa_battery.c | 486 +++++++++++++++++++++++++++++++++++ 3 files changed, 494 insertions(+) create mode 100644 drivers/power/tosa_battery.c diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 58c806e9c58..e3a9c37d08f 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -49,4 +49,11 @@ config BATTERY_OLPC help Say Y to enable support for the battery on the OLPC laptop. +config BATTERY_TOSA + tristate "Sharp SL-6000 (tosa) battery" + depends on MACH_TOSA && MFD_TC6393XB + help + Say Y to enable support for the battery on the Sharp Zaurus + SL-6000 (tosa) models. + endif # POWER_SUPPLY diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 6413ded5fe5..1e408fa268c 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_APM_POWER) += apm_power.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o +obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o diff --git a/drivers/power/tosa_battery.c b/drivers/power/tosa_battery.c new file mode 100644 index 00000000000..bf664fbd661 --- /dev/null +++ b/drivers/power/tosa_battery.c @@ -0,0 +1,486 @@ +/* + * Battery and Power Management code for the Sharp SL-6000x + * + * Copyright (c) 2005 Dirk Opfer + * Copyright (c) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +static DEFINE_MUTEX(bat_lock); /* protects gpio pins */ +static struct work_struct bat_work; + +struct tosa_bat { + int status; + struct power_supply psy; + int full_chrg; + + struct mutex work_lock; /* protects data */ + + bool (*is_present)(struct tosa_bat *bat); + int gpio_full; + int gpio_charge_off; + + int technology; + + int gpio_bat; + int adc_bat; + int adc_bat_divider; + int bat_max; + int bat_min; + + int gpio_temp; + int adc_temp; + int adc_temp_divider; +}; + +static struct tosa_bat tosa_bat_main; +static struct tosa_bat tosa_bat_jacket; + +static unsigned long tosa_read_bat(struct tosa_bat *bat) +{ + unsigned long value = 0; + + if (bat->gpio_bat < 0 || bat->adc_bat < 0) + return 0; + + mutex_lock(&bat_lock); + gpio_set_value(bat->gpio_bat, 1); + msleep(5); + value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, + bat->adc_bat); + gpio_set_value(bat->gpio_bat, 0); + mutex_unlock(&bat_lock); + + value = value * 1000000 / bat->adc_bat_divider; + + return value; +} + +static unsigned long tosa_read_temp(struct tosa_bat *bat) +{ + unsigned long value = 0; + + if (bat->gpio_temp < 0 || bat->adc_temp < 0) + return 0; + + mutex_lock(&bat_lock); + gpio_set_value(bat->gpio_temp, 1); + msleep(5); + value = wm97xx_read_aux_adc(bat->psy.dev->parent->driver_data, + bat->adc_temp); + gpio_set_value(bat->gpio_temp, 0); + mutex_unlock(&bat_lock); + + value = value * 10000 / bat->adc_temp_divider; + + return value; +} + +static int tosa_bat_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int ret = 0; + struct tosa_bat *bat = container_of(psy, struct tosa_bat, psy); + + if (bat->is_present && !bat->is_present(bat) + && psp != POWER_SUPPLY_PROP_PRESENT) { + return -ENODEV; + } + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = bat->status; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = bat->technology; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = tosa_read_bat(bat); + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX: + if (bat->full_chrg == -1) + val->intval = bat->bat_max; + else + val->intval = bat->full_chrg; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = bat->bat_max; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = bat->bat_min; + break; + case POWER_SUPPLY_PROP_TEMP: + val->intval = tosa_read_temp(bat); + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = bat->is_present ? bat->is_present(bat) : 1; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static bool tosa_jacket_bat_is_present(struct tosa_bat *bat) +{ + return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0; +} + +static void tosa_bat_external_power_changed(struct power_supply *psy) +{ + schedule_work(&bat_work); +} + +static irqreturn_t tosa_bat_gpio_isr(int irq, void *data) +{ + pr_info("tosa_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq))); + schedule_work(&bat_work); + return IRQ_HANDLED; +} + +static void tosa_bat_update(struct tosa_bat *bat) +{ + int old; + struct power_supply *psy = &bat->psy; + + mutex_lock(&bat->work_lock); + + old = bat->status; + + if (bat->is_present && !bat->is_present(bat)) { + printk(KERN_NOTICE "%s not present\n", psy->name); + bat->status = POWER_SUPPLY_STATUS_UNKNOWN; + bat->full_chrg = -1; + } else if (power_supply_am_i_supplied(psy)) { + if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) { + gpio_set_value(bat->gpio_charge_off, 0); + mdelay(15); + } + + if (gpio_get_value(bat->gpio_full)) { + if (old == POWER_SUPPLY_STATUS_CHARGING || + bat->full_chrg == -1) + bat->full_chrg = tosa_read_bat(bat); + + gpio_set_value(bat->gpio_charge_off, 1); + bat->status = POWER_SUPPLY_STATUS_FULL; + } else { + gpio_set_value(bat->gpio_charge_off, 0); + bat->status = POWER_SUPPLY_STATUS_CHARGING; + } + } else { + gpio_set_value(bat->gpio_charge_off, 1); + bat->status = POWER_SUPPLY_STATUS_DISCHARGING; + } + + if (old != bat->status) + power_supply_changed(psy); + + mutex_unlock(&bat->work_lock); +} + +static void tosa_bat_work(struct work_struct *work) +{ + tosa_bat_update(&tosa_bat_main); + tosa_bat_update(&tosa_bat_jacket); +} + + +static enum power_supply_property tosa_bat_main_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MAX, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_PRESENT, +}; + +static enum power_supply_property tosa_bat_bu_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_PRESENT, +}; + +static struct tosa_bat tosa_bat_main = { + .status = POWER_SUPPLY_STATUS_DISCHARGING, + .full_chrg = -1, + .psy = { + .name = "main-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = tosa_bat_main_props, + .num_properties = ARRAY_SIZE(tosa_bat_main_props), + .get_property = tosa_bat_get_property, + .external_power_changed = tosa_bat_external_power_changed, + .use_for_apm = 1, + }, + + .gpio_full = TOSA_GPIO_BAT0_CRG, + .gpio_charge_off = TOSA_GPIO_CHARGE_OFF, + + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + + .gpio_bat = TOSA_GPIO_BAT0_V_ON, + .adc_bat = WM97XX_AUX_ID3, + .adc_bat_divider = 414, + .bat_max = 4310000, + .bat_min = 1551 * 1000000 / 414, + + .gpio_temp = TOSA_GPIO_BAT1_TH_ON, + .adc_temp = WM97XX_AUX_ID2, + .adc_temp_divider = 10000, +}; + +static struct tosa_bat tosa_bat_jacket = { + .status = POWER_SUPPLY_STATUS_DISCHARGING, + .full_chrg = -1, + .psy = { + .name = "jacket-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = tosa_bat_main_props, + .num_properties = ARRAY_SIZE(tosa_bat_main_props), + .get_property = tosa_bat_get_property, + .external_power_changed = tosa_bat_external_power_changed, + }, + + .is_present = tosa_jacket_bat_is_present, + .gpio_full = TOSA_GPIO_BAT1_CRG, + .gpio_charge_off = TOSA_GPIO_CHARGE_OFF_JC, + + .technology = POWER_SUPPLY_TECHNOLOGY_LIPO, + + .gpio_bat = TOSA_GPIO_BAT1_V_ON, + .adc_bat = WM97XX_AUX_ID3, + .adc_bat_divider = 414, + .bat_max = 4310000, + .bat_min = 1551 * 1000000 / 414, + + .gpio_temp = TOSA_GPIO_BAT0_TH_ON, + .adc_temp = WM97XX_AUX_ID2, + .adc_temp_divider = 10000, +}; + +static struct tosa_bat tosa_bat_bu = { + .status = POWER_SUPPLY_STATUS_UNKNOWN, + .full_chrg = -1, + + .psy = { + .name = "backup-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = tosa_bat_bu_props, + .num_properties = ARRAY_SIZE(tosa_bat_bu_props), + .get_property = tosa_bat_get_property, + .external_power_changed = tosa_bat_external_power_changed, + }, + + .gpio_full = -1, + .gpio_charge_off = -1, + + .technology = POWER_SUPPLY_TECHNOLOGY_LiMn, + + .gpio_bat = TOSA_GPIO_BU_CHRG_ON, + .adc_bat = WM97XX_AUX_ID4, + .adc_bat_divider = 1266, + + .gpio_temp = -1, + .adc_temp = -1, + .adc_temp_divider = -1, +}; + +static struct { + int gpio; + char *name; + bool output; + int value; +} gpios[] = { + { TOSA_GPIO_CHARGE_OFF, "main charge off", 1, 1 }, + { TOSA_GPIO_CHARGE_OFF_JC, "jacket charge off", 1, 1 }, + { TOSA_GPIO_BAT_SW_ON, "battery switch", 1, 0 }, + { TOSA_GPIO_BAT0_V_ON, "main battery", 1, 0 }, + { TOSA_GPIO_BAT1_V_ON, "jacket battery", 1, 0 }, + { TOSA_GPIO_BAT1_TH_ON, "main battery temp", 1, 0 }, + { TOSA_GPIO_BAT0_TH_ON, "jacket battery temp", 1, 0 }, + { TOSA_GPIO_BU_CHRG_ON, "backup battery", 1, 0 }, + { TOSA_GPIO_BAT0_CRG, "main battery full", 0, 0 }, + { TOSA_GPIO_BAT1_CRG, "jacket battery full", 0, 0 }, + { TOSA_GPIO_BAT0_LOW, "main battery low", 0, 0 }, + { TOSA_GPIO_BAT1_LOW, "jacket battery low", 0, 0 }, + { TOSA_GPIO_JACKET_DETECT, "jacket detect", 0, 0 }, +}; + +#ifdef CONFIG_PM +static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state) +{ + /* flush all pending status updates */ + flush_scheduled_work(); + return 0; +} + +static int tosa_bat_resume(struct platform_device *dev) +{ + /* things may have changed while we were away */ + schedule_work(&bat_work); + return 0; +} +#else +#define tosa_bat_suspend NULL +#define tosa_bat_resume NULL +#endif + +static int __devinit tosa_bat_probe(struct platform_device *dev) +{ + int ret; + int i; + + if (!machine_is_tosa()) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(gpios); i++) { + ret = gpio_request(gpios[i].gpio, gpios[i].name); + if (ret) { + i--; + goto err_gpio; + } + + if (gpios[i].output) + ret = gpio_direction_output(gpios[i].gpio, + gpios[i].value); + else + ret = gpio_direction_input(gpios[i].gpio); + + if (ret) + goto err_gpio; + } + + mutex_init(&tosa_bat_main.work_lock); + mutex_init(&tosa_bat_jacket.work_lock); + + INIT_WORK(&bat_work, tosa_bat_work); + + ret = power_supply_register(&dev->dev, &tosa_bat_main.psy); + if (ret) + goto err_psy_reg_main; + ret = power_supply_register(&dev->dev, &tosa_bat_jacket.psy); + if (ret) + goto err_psy_reg_jacket; + ret = power_supply_register(&dev->dev, &tosa_bat_bu.psy); + if (ret) + goto err_psy_reg_bu; + + ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), + tosa_bat_gpio_isr, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "main full", &tosa_bat_main); + if (ret) + goto err_req_main; + + ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), + tosa_bat_gpio_isr, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "jacket full", &tosa_bat_jacket); + if (ret) + goto err_req_jacket; + + ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), + tosa_bat_gpio_isr, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "jacket detect", &tosa_bat_jacket); + if (!ret) { + schedule_work(&bat_work); + return 0; + } + + free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket); +err_req_jacket: + free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main); +err_req_main: + power_supply_unregister(&tosa_bat_bu.psy); +err_psy_reg_bu: + power_supply_unregister(&tosa_bat_jacket.psy); +err_psy_reg_jacket: + power_supply_unregister(&tosa_bat_main.psy); +err_psy_reg_main: + + /* see comment in tosa_bat_remove */ + flush_scheduled_work(); + + i--; +err_gpio: + for (; i >= 0; i--) + gpio_free(gpios[i].gpio); + + return ret; +} + +static int __devexit tosa_bat_remove(struct platform_device *dev) +{ + int i; + + free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket); + free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket); + free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main); + + power_supply_unregister(&tosa_bat_bu.psy); + power_supply_unregister(&tosa_bat_jacket.psy); + power_supply_unregister(&tosa_bat_main.psy); + + /* + * now flush all pending work. + * we won't get any more schedules, since all + * sources (isr and external_power_changed) + * are unregistered now. + */ + flush_scheduled_work(); + + for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--) + gpio_free(gpios[i].gpio); + + return 0; +} + +static struct platform_driver tosa_bat_driver = { + .driver.name = "wm97xx-battery", + .driver.owner = THIS_MODULE, + .probe = tosa_bat_probe, + .remove = __devexit_p(tosa_bat_remove), + .suspend = tosa_bat_suspend, + .resume = tosa_bat_resume, +}; + +static int __init tosa_bat_init(void) +{ + return platform_driver_register(&tosa_bat_driver); +} + +static void __exit tosa_bat_exit(void) +{ + platform_driver_unregister(&tosa_bat_driver); +} + +module_init(tosa_bat_init); +module_exit(tosa_bat_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Dmitry Baryshkov"); +MODULE_DESCRIPTION("Tosa battery driver"); +MODULE_ALIAS("platform:wm97xx-battery"); -- GitLab From d03856bd5e5abac717da137dc60fe4a691769bd0 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Sat, 2 Aug 2008 18:51:32 -0400 Subject: [PATCH 0065/1024] ext4: Fix data corruption when writing to prealloc area Inserting an extent can cause a new entry in the already existing index block. That doesn't increase the depth of the instead. Instead it adds a new leaf block. Now with the new leaf block the path information corresponding to the logical block should be fetched from the new block. The old path will be pointing to the old leaf block. We need to recalucate the path information on extent insert even if depth doesn't change. Without this change, the extent merge after converting an unwritten extent to initialized extent takes the wrong extent and cause data corruption. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 41 +++++++++++++++++++++++------------------ 1 file changed, 23 insertions(+), 18 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 42c4c0c892e..8ee1fa54a4e 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2323,7 +2323,10 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, unsigned int newdepth; /* If extent has less than EXT4_EXT_ZERO_LEN zerout directly */ if (allocated <= EXT4_EXT_ZERO_LEN) { - /* Mark first half uninitialized. + /* + * iblock == ee_block is handled by the zerouout + * at the beginning. + * Mark first half uninitialized. * Mark second half initialized and zero out the * initialized extent */ @@ -2346,7 +2349,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, ex->ee_len = orig_ex.ee_len; ext4_ext_store_pblock(ex, ext_pblock(&orig_ex)); ext4_ext_dirty(handle, inode, path + depth); - /* zeroed the full extent */ + /* blocks available from iblock */ return allocated; } else if (err) @@ -2374,6 +2377,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, err = PTR_ERR(path); return err; } + /* get the second half extent details */ ex = path[depth].p_ext; err = ext4_ext_get_access(handle, inode, path + depth); @@ -2403,6 +2407,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, ext4_ext_store_pblock(ex, ext_pblock(&orig_ex)); ext4_ext_dirty(handle, inode, path + depth); /* zeroed the full extent */ + /* blocks available from iblock */ return allocated; } else if (err) @@ -2418,23 +2423,22 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, */ orig_ex.ee_len = cpu_to_le16(ee_len - ext4_ext_get_actual_len(ex3)); - if (newdepth != depth) { - depth = newdepth; - ext4_ext_drop_refs(path); - path = ext4_ext_find_extent(inode, iblock, path); - if (IS_ERR(path)) { - err = PTR_ERR(path); - goto out; - } - eh = path[depth].p_hdr; - ex = path[depth].p_ext; - if (ex2 != &newex) - ex2 = ex; - - err = ext4_ext_get_access(handle, inode, path + depth); - if (err) - goto out; + depth = newdepth; + ext4_ext_drop_refs(path); + path = ext4_ext_find_extent(inode, iblock, path); + if (IS_ERR(path)) { + err = PTR_ERR(path); + goto out; } + eh = path[depth].p_hdr; + ex = path[depth].p_ext; + if (ex2 != &newex) + ex2 = ex; + + err = ext4_ext_get_access(handle, inode, path + depth); + if (err) + goto out; + allocated = max_blocks; /* If extent has less than EXT4_EXT_ZERO_LEN and we are trying @@ -2452,6 +2456,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, ext4_ext_store_pblock(ex, ext_pblock(&orig_ex)); ext4_ext_dirty(handle, inode, path + depth); /* zero out the first half */ + /* blocks available from iblock */ return allocated; } } -- GitLab From 8a266467b8c4841ca994d0fe59f39e584650e3df Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 26 Jul 2008 14:34:21 -0400 Subject: [PATCH 0066/1024] ext4: Allow read/only mounts with corrupted block group checksums If the block group checksums are corrupted, still allow the mount to succeed, so e2fsck can have a chance to try to fix things up. Add code in the remount r/w path to make sure the block group checksums are valid before allowing the filesystem to be remounted read/write. Signed-off-by: "Theodore Ts'o" --- fs/ext4/super.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index b5479b1dff1..876e1c62036 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1626,7 +1626,8 @@ static int ext4_check_descriptors(struct super_block *sb) "Checksum for group %lu failed (%u!=%u)\n", i, le16_to_cpu(ext4_group_desc_csum(sbi, i, gdp)), le16_to_cpu(gdp->bg_checksum)); - return 0; + if (!(sb->s_flags & MS_RDONLY)) + return 0; } if (!flexbg_flag) first_block += EXT4_BLOCKS_PER_GROUP(sb); @@ -2961,6 +2962,7 @@ static int ext4_remount (struct super_block * sb, int * flags, char * data) ext4_fsblk_t n_blocks_count = 0; unsigned long old_sb_flags; struct ext4_mount_options old_opts; + ext4_group_t g; int err; #ifdef CONFIG_QUOTA int i; @@ -3038,6 +3040,26 @@ static int ext4_remount (struct super_block * sb, int * flags, char * data) goto restore_opts; } + /* + * Make sure the group descriptor checksums + * are sane. If they aren't, refuse to + * remount r/w. + */ + for (g = 0; g < sbi->s_groups_count; g++) { + struct ext4_group_desc *gdp = + ext4_get_group_desc(sb, g, NULL); + + if (!ext4_group_desc_csum_verify(sbi, g, gdp)) { + printk(KERN_ERR + "EXT4-fs: ext4_remount: " + "Checksum for group %lu failed (%u!=%u)\n", + g, le16_to_cpu(ext4_group_desc_csum(sbi, g, gdp)), + le16_to_cpu(gdp->bg_checksum)); + err = -EINVAL; + goto restore_opts; + } + } + /* * If we have an unprocessed orphan list hanging * around from a previously readonly bdev mount, -- GitLab From e29d1cde63be0b5f1739416b5574a83c34bf8eeb Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sat, 2 Aug 2008 21:21:02 -0400 Subject: [PATCH 0067/1024] ext4: sync up block and inode bitmap reading functions ext4_read_block_bitmap and read_inode_bitmap do essentially the same thing, and yet they are structured quite differently. I came across this difference while looking at doing bg locking during bg initialization. This patch: * removes unnecessary casts in the error messages * renames read_inode_bitmap to ext4_read_inode_bitmap * and more substantially, restructures the inode bitmap reading function to be more like the block bitmap counterpart. The change to the inode bitmap reader simplifies the locking to be applied in the next patch. Signed-off-by: Eric Sandeen Signed-off-by: Theodore Ts'o --- fs/ext4/balloc.c | 8 ++++---- fs/ext4/ialloc.c | 51 +++++++++++++++++++++++++++--------------------- 2 files changed, 33 insertions(+), 26 deletions(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index 495ab21b983..386cb79ac4b 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -314,8 +314,8 @@ ext4_read_block_bitmap(struct super_block *sb, ext4_group_t block_group) if (unlikely(!bh)) { ext4_error(sb, __func__, "Cannot read block bitmap - " - "block_group = %d, block_bitmap = %llu", - (int)block_group, (unsigned long long)bitmap_blk); + "block_group = %lu, block_bitmap = %llu", + block_group, bitmap_blk); return NULL; } if (bh_uptodate_or_lock(bh)) @@ -331,8 +331,8 @@ ext4_read_block_bitmap(struct super_block *sb, ext4_group_t block_group) put_bh(bh); ext4_error(sb, __func__, "Cannot read block bitmap - " - "block_group = %d, block_bitmap = %llu", - (int)block_group, (unsigned long long)bitmap_blk); + "block_group = %lu, block_bitmap = %llu", + block_group, bitmap_blk); return NULL; } ext4_valid_block_bitmap(sb, desc, block_group, bh); diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index a92eb305344..09cdcd5914d 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -97,34 +97,41 @@ unsigned ext4_init_inode_bitmap(struct super_block *sb, struct buffer_head *bh, * Return buffer_head of bitmap on success or NULL. */ static struct buffer_head * -read_inode_bitmap(struct super_block *sb, ext4_group_t block_group) +ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group) { struct ext4_group_desc *desc; struct buffer_head *bh = NULL; + ext4_fsblk_t bitmap_blk; desc = ext4_get_group_desc(sb, block_group, NULL); if (!desc) - goto error_out; + return NULL; + bitmap_blk = ext4_inode_bitmap(sb, desc); + bh = sb_getblk(sb, bitmap_blk); + if (unlikely(!bh)) { + ext4_error(sb, __func__, + "Cannot read inode bitmap - " + "block_group = %lu, inode_bitmap = %llu", + block_group, bitmap_blk); + return NULL; + } + if (bh_uptodate_or_lock(bh)) + return bh; + if (desc->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) { - bh = sb_getblk(sb, ext4_inode_bitmap(sb, desc)); - if (!buffer_uptodate(bh)) { - lock_buffer(bh); - if (!buffer_uptodate(bh)) { - ext4_init_inode_bitmap(sb, bh, block_group, - desc); - set_buffer_uptodate(bh); - } - unlock_buffer(bh); - } - } else { - bh = sb_bread(sb, ext4_inode_bitmap(sb, desc)); + ext4_init_inode_bitmap(sb, bh, block_group, desc); + set_buffer_uptodate(bh); + unlock_buffer(bh); + return bh; } - if (!bh) - ext4_error(sb, "read_inode_bitmap", + if (bh_submit_read(bh) < 0) { + put_bh(bh); + ext4_error(sb, __func__, "Cannot read inode bitmap - " "block_group = %lu, inode_bitmap = %llu", - block_group, ext4_inode_bitmap(sb, desc)); -error_out: + block_group, bitmap_blk); + return NULL; + } return bh; } @@ -200,7 +207,7 @@ void ext4_free_inode (handle_t *handle, struct inode * inode) } block_group = (ino - 1) / EXT4_INODES_PER_GROUP(sb); bit = (ino - 1) % EXT4_INODES_PER_GROUP(sb); - bitmap_bh = read_inode_bitmap(sb, block_group); + bitmap_bh = ext4_read_inode_bitmap(sb, block_group); if (!bitmap_bh) goto error_return; @@ -623,7 +630,7 @@ got_group: goto fail; brelse(bitmap_bh); - bitmap_bh = read_inode_bitmap(sb, group); + bitmap_bh = ext4_read_inode_bitmap(sb, group); if (!bitmap_bh) goto fail; @@ -891,7 +898,7 @@ struct inode *ext4_orphan_get(struct super_block *sb, unsigned long ino) block_group = (ino - 1) / EXT4_INODES_PER_GROUP(sb); bit = (ino - 1) % EXT4_INODES_PER_GROUP(sb); - bitmap_bh = read_inode_bitmap(sb, block_group); + bitmap_bh = ext4_read_inode_bitmap(sb, block_group); if (!bitmap_bh) { ext4_warning(sb, __func__, "inode bitmap error for orphan %lu", ino); @@ -969,7 +976,7 @@ unsigned long ext4_count_free_inodes (struct super_block * sb) continue; desc_count += le16_to_cpu(gdp->bg_free_inodes_count); brelse(bitmap_bh); - bitmap_bh = read_inode_bitmap(sb, i); + bitmap_bh = ext4_read_inode_bitmap(sb, i); if (!bitmap_bh) continue; -- GitLab From b5f10eed8125702929e57cca7e5956b1b9b6d015 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sat, 2 Aug 2008 21:21:08 -0400 Subject: [PATCH 0068/1024] ext4: lock block groups when initializing I noticed when filling a 1T filesystem with 4 threads using the fs_mark benchmark: fs_mark -d /mnt/test -D 256 -n 100000 -t 4 -s 20480 -F -S 0 that I occasionally got checksum mismatch errors: EXT4-fs error (device sdb): ext4_init_inode_bitmap: Checksum bad for group 6935 etc. I'd reliably get 4-5 of them during the run. It appears that the problem is likely a race to init the bg's when the uninit_bg feature is enabled. With the patch below, which adds sb_bgl_locking around initialization, I was able to complete several runs with no errors or warnings. Signed-off-by: Eric Sandeen Signed-off-by: Theodore Ts'o --- fs/ext4/balloc.c | 3 +++ fs/ext4/ialloc.c | 5 ++++- fs/ext4/mballoc.c | 3 +++ fs/ext4/super.c | 2 ++ 4 files changed, 12 insertions(+), 1 deletion(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index 386cb79ac4b..1ae5004e93f 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -321,12 +321,15 @@ ext4_read_block_bitmap(struct super_block *sb, ext4_group_t block_group) if (bh_uptodate_or_lock(bh)) return bh; + spin_lock(sb_bgl_lock(EXT4_SB(sb), block_group)); if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) { ext4_init_block_bitmap(sb, bh, block_group, desc); set_buffer_uptodate(bh); unlock_buffer(bh); + spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group)); return bh; } + spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group)); if (bh_submit_read(bh) < 0) { put_bh(bh); ext4_error(sb, __func__, diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index 09cdcd5914d..655e760212b 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -118,12 +118,15 @@ ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group) if (bh_uptodate_or_lock(bh)) return bh; + spin_lock(sb_bgl_lock(EXT4_SB(sb), block_group)); if (desc->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) { ext4_init_inode_bitmap(sb, bh, block_group, desc); set_buffer_uptodate(bh); unlock_buffer(bh); + spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group)); return bh; } + spin_unlock(sb_bgl_lock(EXT4_SB(sb), block_group)); if (bh_submit_read(bh) < 0) { put_bh(bh); ext4_error(sb, __func__, @@ -735,7 +738,7 @@ got: /* When marking the block group with * ~EXT4_BG_INODE_UNINIT we don't want to depend - * on the value of bg_itable_unsed even though + * on the value of bg_itable_unused even though * mke2fs could have initialized the same for us. * Instead we calculated the value below */ diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 8d141a25bbe..4258d3289a6 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -787,13 +787,16 @@ static int ext4_mb_init_cache(struct page *page, char *incore) if (bh_uptodate_or_lock(bh[i])) continue; + spin_lock(sb_bgl_lock(EXT4_SB(sb), first_group + i)); if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) { ext4_init_block_bitmap(sb, bh[i], first_group + i, desc); set_buffer_uptodate(bh[i]); unlock_buffer(bh[i]); + spin_unlock(sb_bgl_lock(EXT4_SB(sb), first_group + i)); continue; } + spin_unlock(sb_bgl_lock(EXT4_SB(sb), first_group + i)); get_bh(bh[i]); bh[i]->b_end_io = end_buffer_read_sync; submit_bh(READ, bh[i]); diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 876e1c62036..511997ef6f0 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1621,6 +1621,7 @@ static int ext4_check_descriptors(struct super_block *sb) "(block %llu)!", i, inode_table); return 0; } + spin_lock(sb_bgl_lock(sbi, i)); if (!ext4_group_desc_csum_verify(sbi, i, gdp)) { printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: " "Checksum for group %lu failed (%u!=%u)\n", @@ -1629,6 +1630,7 @@ static int ext4_check_descriptors(struct super_block *sb) if (!(sb->s_flags & MS_RDONLY)) return 0; } + spin_unlock(sb_bgl_lock(sbi, i)); if (!flexbg_flag) first_block += EXT4_BLOCKS_PER_GROUP(sb); } -- GitLab From ce89f46cb833f89c58a08240faa6b5e963086b8a Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 23 Jul 2008 14:09:29 -0400 Subject: [PATCH 0069/1024] ext4: Improve error handling in mballoc Don't call BUG_ON on file system failures. Instead use ext4_error and also handle the continue case properly. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Theodore Ts'o --- fs/ext4/mballoc.c | 34 +++++++++++++++++++++++----------- 1 file changed, 23 insertions(+), 11 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 4258d3289a6..500d3920d41 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -3736,20 +3736,23 @@ ext4_mb_discard_group_preallocations(struct super_block *sb, bitmap_bh = ext4_read_block_bitmap(sb, group); if (bitmap_bh == NULL) { - /* error handling here */ - ext4_mb_release_desc(&e4b); - BUG_ON(bitmap_bh == NULL); + ext4_error(sb, __func__, "Error in reading block " + "bitmap for %lu\n", group); + return 0; } err = ext4_mb_load_buddy(sb, group, &e4b); - BUG_ON(err != 0); /* error handling here */ + if (err) { + ext4_error(sb, __func__, "Error in loading buddy " + "information for %lu\n", group); + put_bh(bitmap_bh); + return 0; + } if (needed == 0) needed = EXT4_BLOCKS_PER_GROUP(sb) + 1; - grp = ext4_get_group_info(sb, group); INIT_LIST_HEAD(&list); - ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS); repeat: ext4_lock_group(sb, group); @@ -3906,13 +3909,18 @@ repeat: ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, NULL); err = ext4_mb_load_buddy(sb, group, &e4b); - BUG_ON(err != 0); /* error handling here */ + if (err) { + ext4_error(sb, __func__, "Error in loading buddy " + "information for %lu\n", group); + continue; + } bitmap_bh = ext4_read_block_bitmap(sb, group); if (bitmap_bh == NULL) { - /* error handling here */ + ext4_error(sb, __func__, "Error in reading block " + "bitmap for %lu\n", group); ext4_mb_release_desc(&e4b); - BUG_ON(bitmap_bh == NULL); + continue; } ext4_lock_group(sb, group); @@ -4423,11 +4431,15 @@ do_more: count -= overflow; } bitmap_bh = ext4_read_block_bitmap(sb, block_group); - if (!bitmap_bh) + if (!bitmap_bh) { + err = -EIO; goto error_return; + } gdp = ext4_get_group_desc(sb, block_group, &gd_bh); - if (!gdp) + if (!gdp) { + err = -EIO; goto error_return; + } if (in_range(ext4_block_bitmap(sb, gdp), block, count) || in_range(ext4_inode_bitmap(sb, gdp), block, count) || -- GitLab From 1320cbcf771a20b44cf580712b843d213ae75cd3 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 23 Jul 2008 14:09:26 -0400 Subject: [PATCH 0070/1024] ext4: Convert the usage of NR_CPUS to nr_cpu_ids. NR_CPUS can be really large. We should be using nr_cpu_ids instead. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Theodore Ts'o --- fs/ext4/mballoc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 500d3920d41..49bec8404c5 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2540,7 +2540,7 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery) sbi->s_mb_history_filter = EXT4_MB_HISTORY_DEFAULT; sbi->s_mb_group_prealloc = MB_DEFAULT_GROUP_PREALLOC; - i = sizeof(struct ext4_locality_group) * NR_CPUS; + i = sizeof(struct ext4_locality_group) * nr_cpu_ids; sbi->s_locality_groups = kmalloc(i, GFP_KERNEL); if (sbi->s_locality_groups == NULL) { clear_opt(sbi->s_mount_opt, MBALLOC); @@ -2548,7 +2548,7 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery) kfree(sbi->s_mb_maxs); return -ENOMEM; } - for (i = 0; i < NR_CPUS; i++) { + for (i = 0; i < nr_cpu_ids; i++) { struct ext4_locality_group *lg; lg = &sbi->s_locality_groups[i]; mutex_init(&lg->lg_mutex); -- GitLab From 6be2ded1d7c51b39144b9f07d2c839e1bd8707f1 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 23 Jul 2008 14:14:05 -0400 Subject: [PATCH 0071/1024] ext4: Don't allow lg prealloc list to be grow large. Currently, the locality group prealloc list is freed only when there is a block allocation failure. This can result in large number of entries in the preallocation list making ext4_mb_use_preallocated() expensive. To fix this, we convert the locality group prealloc list to a hash list. The hash index is the order of number of blocks in the prealloc space with a max order of 9. When adding prealloc space to the list we make sure total entries for each order does not exceed 8. If it is more than 8 we discard few entries and make sure the we have only <= 5 entries. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Theodore Ts'o --- fs/ext4/mballoc.c | 213 ++++++++++++++++++++++++++++++++++++++++------ fs/ext4/mballoc.h | 10 ++- 2 files changed, 193 insertions(+), 30 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 49bec8404c5..865e9ddb44d 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2480,7 +2480,7 @@ err_freesgi: int ext4_mb_init(struct super_block *sb, int needs_recovery) { struct ext4_sb_info *sbi = EXT4_SB(sb); - unsigned i; + unsigned i, j; unsigned offset; unsigned max; int ret; @@ -2552,7 +2552,8 @@ int ext4_mb_init(struct super_block *sb, int needs_recovery) struct ext4_locality_group *lg; lg = &sbi->s_locality_groups[i]; mutex_init(&lg->lg_mutex); - INIT_LIST_HEAD(&lg->lg_prealloc_list); + for (j = 0; j < PREALLOC_TB_SIZE; j++) + INIT_LIST_HEAD(&lg->lg_prealloc_list[j]); spin_lock_init(&lg->lg_prealloc_lock); } @@ -3263,6 +3264,7 @@ static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac, struct ext4_prealloc_space *pa) { unsigned int len = ac->ac_o_ex.fe_len; + ext4_get_group_no_and_offset(ac->ac_sb, pa->pa_pstart, &ac->ac_b_ex.fe_group, &ac->ac_b_ex.fe_start); @@ -3285,6 +3287,7 @@ static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac, static noinline_for_stack int ext4_mb_use_preallocated(struct ext4_allocation_context *ac) { + int order, i; struct ext4_inode_info *ei = EXT4_I(ac->ac_inode); struct ext4_locality_group *lg; struct ext4_prealloc_space *pa; @@ -3325,22 +3328,29 @@ ext4_mb_use_preallocated(struct ext4_allocation_context *ac) lg = ac->ac_lg; if (lg == NULL) return 0; - - rcu_read_lock(); - list_for_each_entry_rcu(pa, &lg->lg_prealloc_list, pa_inode_list) { - spin_lock(&pa->pa_lock); - if (pa->pa_deleted == 0 && pa->pa_free >= ac->ac_o_ex.fe_len) { - atomic_inc(&pa->pa_count); - ext4_mb_use_group_pa(ac, pa); + order = fls(ac->ac_o_ex.fe_len) - 1; + if (order > PREALLOC_TB_SIZE - 1) + /* The max size of hash table is PREALLOC_TB_SIZE */ + order = PREALLOC_TB_SIZE - 1; + + for (i = order; i < PREALLOC_TB_SIZE; i++) { + rcu_read_lock(); + list_for_each_entry_rcu(pa, &lg->lg_prealloc_list[i], + pa_inode_list) { + spin_lock(&pa->pa_lock); + if (pa->pa_deleted == 0 && + pa->pa_free >= ac->ac_o_ex.fe_len) { + atomic_inc(&pa->pa_count); + ext4_mb_use_group_pa(ac, pa); + spin_unlock(&pa->pa_lock); + ac->ac_criteria = 20; + rcu_read_unlock(); + return 1; + } spin_unlock(&pa->pa_lock); - ac->ac_criteria = 20; - rcu_read_unlock(); - return 1; } - spin_unlock(&pa->pa_lock); + rcu_read_unlock(); } - rcu_read_unlock(); - return 0; } @@ -3563,6 +3573,7 @@ ext4_mb_new_group_pa(struct ext4_allocation_context *ac) pa->pa_free = pa->pa_len; atomic_set(&pa->pa_count, 1); spin_lock_init(&pa->pa_lock); + INIT_LIST_HEAD(&pa->pa_inode_list); pa->pa_deleted = 0; pa->pa_linear = 1; @@ -3583,10 +3594,10 @@ ext4_mb_new_group_pa(struct ext4_allocation_context *ac) list_add(&pa->pa_group_list, &grp->bb_prealloc_list); ext4_unlock_group(sb, ac->ac_b_ex.fe_group); - spin_lock(pa->pa_obj_lock); - list_add_tail_rcu(&pa->pa_inode_list, &lg->lg_prealloc_list); - spin_unlock(pa->pa_obj_lock); - + /* + * We will later add the new pa to the right bucket + * after updating the pa_free in ext4_mb_release_context + */ return 0; } @@ -4123,22 +4134,168 @@ ext4_mb_initialize_context(struct ext4_allocation_context *ac, } +static noinline_for_stack void +ext4_mb_discard_lg_preallocations(struct super_block *sb, + struct ext4_locality_group *lg, + int order, int total_entries) +{ + ext4_group_t group = 0; + struct ext4_buddy e4b; + struct list_head discard_list; + struct ext4_prealloc_space *pa, *tmp; + struct ext4_allocation_context *ac; + + mb_debug("discard locality group preallocation\n"); + + INIT_LIST_HEAD(&discard_list); + ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS); + + spin_lock(&lg->lg_prealloc_lock); + list_for_each_entry_rcu(pa, &lg->lg_prealloc_list[order], + pa_inode_list) { + spin_lock(&pa->pa_lock); + if (atomic_read(&pa->pa_count)) { + /* + * This is the pa that we just used + * for block allocation. So don't + * free that + */ + spin_unlock(&pa->pa_lock); + continue; + } + if (pa->pa_deleted) { + spin_unlock(&pa->pa_lock); + continue; + } + /* only lg prealloc space */ + BUG_ON(!pa->pa_linear); + + /* seems this one can be freed ... */ + pa->pa_deleted = 1; + spin_unlock(&pa->pa_lock); + + list_del_rcu(&pa->pa_inode_list); + list_add(&pa->u.pa_tmp_list, &discard_list); + + total_entries--; + if (total_entries <= 5) { + /* + * we want to keep only 5 entries + * allowing it to grow to 8. This + * mak sure we don't call discard + * soon for this list. + */ + break; + } + } + spin_unlock(&lg->lg_prealloc_lock); + + list_for_each_entry_safe(pa, tmp, &discard_list, u.pa_tmp_list) { + + ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, NULL); + if (ext4_mb_load_buddy(sb, group, &e4b)) { + ext4_error(sb, __func__, "Error in loading buddy " + "information for %lu\n", group); + continue; + } + ext4_lock_group(sb, group); + list_del(&pa->pa_group_list); + ext4_mb_release_group_pa(&e4b, pa, ac); + ext4_unlock_group(sb, group); + + ext4_mb_release_desc(&e4b); + list_del(&pa->u.pa_tmp_list); + call_rcu(&(pa)->u.pa_rcu, ext4_mb_pa_callback); + } + if (ac) + kmem_cache_free(ext4_ac_cachep, ac); +} + +/* + * We have incremented pa_count. So it cannot be freed at this + * point. Also we hold lg_mutex. So no parallel allocation is + * possible from this lg. That means pa_free cannot be updated. + * + * A parallel ext4_mb_discard_group_preallocations is possible. + * which can cause the lg_prealloc_list to be updated. + */ + +static void ext4_mb_add_n_trim(struct ext4_allocation_context *ac) +{ + int order, added = 0, lg_prealloc_count = 1; + struct super_block *sb = ac->ac_sb; + struct ext4_locality_group *lg = ac->ac_lg; + struct ext4_prealloc_space *tmp_pa, *pa = ac->ac_pa; + + order = fls(pa->pa_free) - 1; + if (order > PREALLOC_TB_SIZE - 1) + /* The max size of hash table is PREALLOC_TB_SIZE */ + order = PREALLOC_TB_SIZE - 1; + /* Add the prealloc space to lg */ + rcu_read_lock(); + list_for_each_entry_rcu(tmp_pa, &lg->lg_prealloc_list[order], + pa_inode_list) { + spin_lock(&tmp_pa->pa_lock); + if (tmp_pa->pa_deleted) { + spin_unlock(&pa->pa_lock); + continue; + } + if (!added && pa->pa_free < tmp_pa->pa_free) { + /* Add to the tail of the previous entry */ + list_add_tail_rcu(&pa->pa_inode_list, + &tmp_pa->pa_inode_list); + added = 1; + /* + * we want to count the total + * number of entries in the list + */ + } + spin_unlock(&tmp_pa->pa_lock); + lg_prealloc_count++; + } + if (!added) + list_add_tail_rcu(&pa->pa_inode_list, + &lg->lg_prealloc_list[order]); + rcu_read_unlock(); + + /* Now trim the list to be not more than 8 elements */ + if (lg_prealloc_count > 8) { + ext4_mb_discard_lg_preallocations(sb, lg, + order, lg_prealloc_count); + return; + } + return ; +} + /* * release all resource we used in allocation */ static int ext4_mb_release_context(struct ext4_allocation_context *ac) { - if (ac->ac_pa) { - if (ac->ac_pa->pa_linear) { + struct ext4_prealloc_space *pa = ac->ac_pa; + if (pa) { + if (pa->pa_linear) { /* see comment in ext4_mb_use_group_pa() */ - spin_lock(&ac->ac_pa->pa_lock); - ac->ac_pa->pa_pstart += ac->ac_b_ex.fe_len; - ac->ac_pa->pa_lstart += ac->ac_b_ex.fe_len; - ac->ac_pa->pa_free -= ac->ac_b_ex.fe_len; - ac->ac_pa->pa_len -= ac->ac_b_ex.fe_len; - spin_unlock(&ac->ac_pa->pa_lock); + spin_lock(&pa->pa_lock); + pa->pa_pstart += ac->ac_b_ex.fe_len; + pa->pa_lstart += ac->ac_b_ex.fe_len; + pa->pa_free -= ac->ac_b_ex.fe_len; + pa->pa_len -= ac->ac_b_ex.fe_len; + spin_unlock(&pa->pa_lock); + /* + * We want to add the pa to the right bucket. + * Remove it from the list and while adding + * make sure the list to which we are adding + * doesn't grow big. + */ + if (likely(pa->pa_free)) { + spin_lock(pa->pa_obj_lock); + list_del_rcu(&pa->pa_inode_list); + spin_unlock(pa->pa_obj_lock); + ext4_mb_add_n_trim(ac); + } } - ext4_mb_put_pa(ac, ac->ac_sb, ac->ac_pa); + ext4_mb_put_pa(ac, ac->ac_sb, pa); } if (ac->ac_bitmap_page) page_cache_release(ac->ac_bitmap_page); diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h index bfe6add46bc..c7c9906c2a7 100644 --- a/fs/ext4/mballoc.h +++ b/fs/ext4/mballoc.h @@ -164,11 +164,17 @@ struct ext4_free_extent { * Locality group: * we try to group all related changes together * so that writeback can flush/allocate them together as well + * Size of lg_prealloc_list hash is determined by MB_DEFAULT_GROUP_PREALLOC + * (512). We store prealloc space into the hash based on the pa_free blocks + * order value.ie, fls(pa_free)-1; */ +#define PREALLOC_TB_SIZE 10 struct ext4_locality_group { /* for allocator */ - struct mutex lg_mutex; /* to serialize allocates */ - struct list_head lg_prealloc_list;/* list of preallocations */ + /* to serialize allocates */ + struct mutex lg_mutex; + /* list of preallocations */ + struct list_head lg_prealloc_list[PREALLOC_TB_SIZE]; spinlock_t lg_prealloc_lock; }; -- GitLab From 9c83a923c67df311c467ec956009f0eb4019195d Mon Sep 17 00:00:00 2001 From: Hidehiro Kawai Date: Sat, 26 Jul 2008 16:39:26 -0400 Subject: [PATCH 0072/1024] ext4: don't read inode block if the buffer has a write error A transient I/O error can corrupt inode data. Here is the scenario: (1) update inode_A at the block_B (2) pdflush writes out new inode_A to the filesystem, but it results in write I/O error, at this point, BH_Uptodate flag of the buffer for block_B is cleared and BH_Write_EIO is set (3) create new inode_C which located at block_B, and __ext4_get_inode_loc() tries to read on-disk block_B because the buffer is not uptodate (4) if it can read on-disk block_B successfully, inode_A is overwritten by old data This patch makes __ext4_get_inode_loc() not read the inode block if the buffer has BH_Write_EIO flag. In this case, the buffer should have the latest information, so setting the uptodate flag to the buffer (this avoids WARN_ON_ONCE() in mark_buffer_dirty().) According to this change, we would need to test BH_Write_EIO flag for the error checking. Currently nobody checks write I/O errors on metadata buffers, but it will be done in other patches I'm working on. Signed-off-by: Hidehiro Kawai Cc: sugita Cc: Satoshi OSHIMA Cc: Nick Piggin Cc: Jan Kara Cc: Signed-off-by: Andrew Morton Signed-off-by: Theodore Ts'o --- fs/ext4/inode.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 9843b046c23..efe8caa3811 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3590,6 +3590,16 @@ static int __ext4_get_inode_loc(struct inode *inode, } if (!buffer_uptodate(bh)) { lock_buffer(bh); + + /* + * If the buffer has the write error flag, we have failed + * to write out another inode in the same block. In this + * case, we don't have to read the block because we may + * read the old inode data successfully. + */ + if (buffer_write_io_error(bh) && !buffer_uptodate(bh)) + set_buffer_uptodate(bh); + if (buffer_uptodate(bh)) { /* someone brought it uptodate while we waited */ unlock_buffer(bh); -- GitLab From e9e34f4e8f42177c66754fec1edfd35e70c18f99 Mon Sep 17 00:00:00 2001 From: Hidehiro Kawai Date: Thu, 31 Jul 2008 22:26:04 -0400 Subject: [PATCH 0073/1024] jbd2: don't abort if flushing file data failed In ordered mode, the current jbd2 aborts the journal if a file data buffer has an error. But this behavior is unintended, and we found that it has been adopted accidentally. This patch undoes it and just calls printk() instead of aborting the journal. Unlike a similar patch for ext3/jbd, file data buffers are written via generic_writepages(). But we also need to set AS_EIO into their mappings because wait_on_page_writeback_range() clears AS_EIO before a user process sees it. Signed-off-by: Hidehiro Kawai Signed-off-by: "Theodore Ts'o" --- fs/jbd2/commit.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index f8b3be87322..adf0395f318 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -262,8 +262,18 @@ static int journal_finish_inode_data_buffers(journal_t *journal, jinode->i_flags |= JI_COMMIT_RUNNING; spin_unlock(&journal->j_list_lock); err = filemap_fdatawait(jinode->i_vfs_inode->i_mapping); - if (!ret) - ret = err; + if (err) { + /* + * Because AS_EIO is cleared by + * wait_on_page_writeback_range(), set it again so + * that user process can get -EIO from fsync(). + */ + set_bit(AS_EIO, + &jinode->i_vfs_inode->i_mapping->flags); + + if (!ret) + ret = err; + } spin_lock(&journal->j_list_lock); jinode->i_flags &= ~JI_COMMIT_RUNNING; wake_up_bit(&jinode->i_flags, __JI_COMMIT_RUNNING); @@ -670,8 +680,14 @@ start_journal_io: * commit block, which happens below in such setting. */ err = journal_finish_inode_data_buffers(journal, commit_transaction); - if (err) - jbd2_journal_abort(journal, err); + if (err) { + char b[BDEVNAME_SIZE]; + + printk(KERN_WARNING + "JBD2: Detected IO errors while flushing file data " + "on %s\n", bdevname(journal->j_fs_dev, b)); + err = 0; + } /* Lo and behold: we have just managed to send a transaction to the log. Before we can commit it, wait for the IO so far to -- GitLab From d5a0d4f732af3438e592efab4cb80076d1dd81b5 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sat, 2 Aug 2008 18:51:06 -0400 Subject: [PATCH 0074/1024] ext4: fix ext4_da_write_begin error path ext4_da_write_begin needs to call journal_stop before returning, if the page allocation fails. Signed-off-by: Eric Sandeen Acked-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index efe8caa3811..37f834bc7cd 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2280,8 +2280,11 @@ retry: } page = __grab_cache_page(mapping, index); - if (!page) - return -ENOMEM; + if (!page) { + ext4_journal_stop(handle); + ret = -ENOMEM; + goto out; + } *pagep = page; ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata, -- GitLab From 0123c93998511978556b03d2bb023af92aa24d55 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 1 Aug 2008 20:57:54 -0400 Subject: [PATCH 0075/1024] ext4: Fix ext4_ext_journal_restart() The ext4_ext_journal_restart() is a convenience function which checks to see if the requested number of credits is present, and if so it closes the current transaction and attaches the current handle to the new transaction. Unfortunately, it wasn't proprely checking the return value from ext4_journal_extend(), so it was starting a new transaction when one was not necessary, and returning an error when all that was necessary was to restart the handle with a new transaction. Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 8ee1fa54a4e..f554703eb92 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -99,7 +99,7 @@ static int ext4_ext_journal_restart(handle_t *handle, int needed) if (handle->h_buffer_credits > needed) return 0; err = ext4_journal_extend(handle, needed); - if (err) + if (err <= 0) return err; return ext4_journal_restart(handle, needed); } -- GitLab From bc965ab3f2b4b7bb898b11d61d25295c2053b8ac Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 2 Aug 2008 21:10:38 -0400 Subject: [PATCH 0076/1024] ext4: Fix lack of credits BUG() when deleting a badly fragmented inode The extents codepath for ext4_truncate() requests journal transaction credits in very small chunks, requesting only what is needed. This means there may not be enough credits left on the transaction handle after ext4_truncate() returns and then when ext4_delete_inode() tries finish up its work, it may not have enough transaction credits, causing a BUG() oops in the jbd2 core. Also, reserve an extra 2 blocks when starting an ext4_delete_inode() since we need to update the inode bitmap, as well as update the orphaned inode linked list. Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 37f834bc7cd..2697eaf0368 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -191,6 +191,7 @@ static int ext4_journal_test_restart(handle_t *handle, struct inode *inode) void ext4_delete_inode (struct inode * inode) { handle_t *handle; + int err; if (ext4_should_order_data(inode)) ext4_begin_ordered_truncate(inode, 0); @@ -199,8 +200,9 @@ void ext4_delete_inode (struct inode * inode) if (is_bad_inode(inode)) goto no_delete; - handle = start_transaction(inode); + handle = ext4_journal_start(inode, blocks_for_truncate(inode)+3); if (IS_ERR(handle)) { + ext4_std_error(inode->i_sb, PTR_ERR(handle)); /* * If we're going to skip the normal cleanup, we still need to * make sure that the in-core orphan linked list is properly @@ -213,8 +215,34 @@ void ext4_delete_inode (struct inode * inode) if (IS_SYNC(inode)) handle->h_sync = 1; inode->i_size = 0; + err = ext4_mark_inode_dirty(handle, inode); + if (err) { + ext4_warning(inode->i_sb, __func__, + "couldn't mark inode dirty (err %d)", err); + goto stop_handle; + } if (inode->i_blocks) ext4_truncate(inode); + + /* + * ext4_ext_truncate() doesn't reserve any slop when it + * restarts journal transactions; therefore there may not be + * enough credits left in the handle to remove the inode from + * the orphan list and set the dtime field. + */ + if (handle->h_buffer_credits < 3) { + err = ext4_journal_extend(handle, 3); + if (err > 0) + err = ext4_journal_restart(handle, 3); + if (err != 0) { + ext4_warning(inode->i_sb, __func__, + "couldn't extend journal (err %d)", err); + stop_handle: + ext4_journal_stop(handle); + goto no_delete; + } + } + /* * Kill off the orphan record which ext4_truncate created. * AKPM: I think this can be inside the above `if'. -- GitLab From 34071da71a665d8c81e3b3467c9a2e7c56386fec Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 1 Aug 2008 21:59:19 -0400 Subject: [PATCH 0077/1024] ext4: don't assume extents can't cross block groups when truncating With the FLEX_BG layout, there is no reason why extents can't cross block groups, so make the truncate code reserve enough credits so we don't BUG if we come across such an extent. Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index f554703eb92..f7529e27d79 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1910,9 +1910,13 @@ ext4_ext_rm_leaf(handle_t *handle, struct inode *inode, BUG_ON(b != ex_ee_block + ex_ee_len - 1); } - /* at present, extent can't cross block group: */ - /* leaf + bitmap + group desc + sb + inode */ - credits = 5; + /* + * 3 for leaf, sb, and inode plus 2 (bmap and group + * descriptor) for each block group; assume two block + * groups plus ex_ee_len/blocks_per_block_group for + * the worst case + */ + credits = 7 + 2*(ex_ee_len/EXT4_BLOCKS_PER_GROUP(inode->i_sb)); if (ex == EXT_FIRST_EXTENT(eh)) { correct_index = 1; credits += (ext_depth(inode)) + 1; -- GitLab From 12219aea6b944e36795267be31d43f9c484841be Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Thu, 17 Jul 2008 16:12:08 -0400 Subject: [PATCH 0078/1024] ext4: Cleanup the block reservation code path The truncate patch should not use the i_allocated_meta_blocks value. So add seperate functions to be used in the truncate and alloc path. We also need to release the meta-data block that we reserved for the blocks that we are truncating. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Theodore Ts'o --- fs/ext4/ext4.h | 1 - fs/ext4/inode.c | 108 ++++++++++++++++++++++++++++++------------------ 2 files changed, 67 insertions(+), 42 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 303e41cf7b1..6c7924d9e35 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1044,7 +1044,6 @@ extern void ext4_mb_update_group_info(struct ext4_group_info *grp, /* inode.c */ -void ext4_da_release_space(struct inode *inode, int used, int to_free); int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode, struct buffer_head *bh, ext4_fsblk_t blocknr); struct buffer_head *ext4_getblk(handle_t *, struct inode *, diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 2697eaf0368..85a862c9c4c 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -980,6 +980,67 @@ out: return err; } +/* + * Calculate the number of metadata blocks need to reserve + * to allocate @blocks for non extent file based file + */ +static int ext4_indirect_calc_metadata_amount(struct inode *inode, int blocks) +{ + int icap = EXT4_ADDR_PER_BLOCK(inode->i_sb); + int ind_blks, dind_blks, tind_blks; + + /* number of new indirect blocks needed */ + ind_blks = (blocks + icap - 1) / icap; + + dind_blks = (ind_blks + icap - 1) / icap; + + tind_blks = 1; + + return ind_blks + dind_blks + tind_blks; +} + +/* + * Calculate the number of metadata blocks need to reserve + * to allocate given number of blocks + */ +static int ext4_calc_metadata_amount(struct inode *inode, int blocks) +{ + if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) + return ext4_ext_calc_metadata_amount(inode, blocks); + + return ext4_indirect_calc_metadata_amount(inode, blocks); +} + +static void ext4_da_update_reserve_space(struct inode *inode, int used) +{ + struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); + int total, mdb, mdb_free; + + spin_lock(&EXT4_I(inode)->i_block_reservation_lock); + /* recalculate the number of metablocks still need to be reserved */ + total = EXT4_I(inode)->i_reserved_data_blocks - used; + mdb = ext4_calc_metadata_amount(inode, total); + + /* figure out how many metablocks to release */ + BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); + mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb; + + /* Account for allocated meta_blocks */ + mdb_free -= EXT4_I(inode)->i_allocated_meta_blocks; + + /* update fs free blocks counter for truncate case */ + percpu_counter_add(&sbi->s_freeblocks_counter, mdb_free); + + /* update per-inode reservations */ + BUG_ON(used > EXT4_I(inode)->i_reserved_data_blocks); + EXT4_I(inode)->i_reserved_data_blocks -= used; + + BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); + EXT4_I(inode)->i_reserved_meta_blocks = mdb; + EXT4_I(inode)->i_allocated_meta_blocks = 0; + spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); +} + /* Maximum number of blocks we map for direct IO at once. */ #define DIO_MAX_BLOCKS 4096 /* @@ -1097,7 +1158,7 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block, * which were deferred till now */ if ((retval > 0) && buffer_delay(bh)) - ext4_da_release_space(inode, retval, 0); + ext4_da_update_reserve_space(inode, retval); } up_write((&EXT4_I(inode)->i_data_sem)); @@ -1465,36 +1526,6 @@ static int ext4_journalled_write_end(struct file *file, return ret ? ret : copied; } -/* - * Calculate the number of metadata blocks need to reserve - * to allocate @blocks for non extent file based file - */ -static int ext4_indirect_calc_metadata_amount(struct inode *inode, int blocks) -{ - int icap = EXT4_ADDR_PER_BLOCK(inode->i_sb); - int ind_blks, dind_blks, tind_blks; - - /* number of new indirect blocks needed */ - ind_blks = (blocks + icap - 1) / icap; - - dind_blks = (ind_blks + icap - 1) / icap; - - tind_blks = 1; - - return ind_blks + dind_blks + tind_blks; -} - -/* - * Calculate the number of metadata blocks need to reserve - * to allocate given number of blocks - */ -static int ext4_calc_metadata_amount(struct inode *inode, int blocks) -{ - if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) - return ext4_ext_calc_metadata_amount(inode, blocks); - - return ext4_indirect_calc_metadata_amount(inode, blocks); -} static int ext4_da_reserve_space(struct inode *inode, int nrblocks) { @@ -1518,7 +1549,6 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks) spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); return -ENOSPC; } - /* reduce fs free blocks counter */ percpu_counter_sub(&sbi->s_freeblocks_counter, total); @@ -1529,35 +1559,31 @@ static int ext4_da_reserve_space(struct inode *inode, int nrblocks) return 0; /* success */ } -void ext4_da_release_space(struct inode *inode, int used, int to_free) +static void ext4_da_release_space(struct inode *inode, int to_free) { struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); int total, mdb, mdb_free, release; spin_lock(&EXT4_I(inode)->i_block_reservation_lock); /* recalculate the number of metablocks still need to be reserved */ - total = EXT4_I(inode)->i_reserved_data_blocks - used - to_free; + total = EXT4_I(inode)->i_reserved_data_blocks - to_free; mdb = ext4_calc_metadata_amount(inode, total); /* figure out how many metablocks to release */ BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); mdb_free = EXT4_I(inode)->i_reserved_meta_blocks - mdb; - /* Account for allocated meta_blocks */ - mdb_free -= EXT4_I(inode)->i_allocated_meta_blocks; - release = to_free + mdb_free; /* update fs free blocks counter for truncate case */ percpu_counter_add(&sbi->s_freeblocks_counter, release); /* update per-inode reservations */ - BUG_ON(used + to_free > EXT4_I(inode)->i_reserved_data_blocks); - EXT4_I(inode)->i_reserved_data_blocks -= (used + to_free); + BUG_ON(to_free > EXT4_I(inode)->i_reserved_data_blocks); + EXT4_I(inode)->i_reserved_data_blocks -= to_free; BUG_ON(mdb > EXT4_I(inode)->i_reserved_meta_blocks); EXT4_I(inode)->i_reserved_meta_blocks = mdb; - EXT4_I(inode)->i_allocated_meta_blocks = 0; spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); } @@ -1579,7 +1605,7 @@ static void ext4_da_page_release_reservation(struct page *page, } curr_off = next_off; } while ((bh = bh->b_this_page) != head); - ext4_da_release_space(page->mapping->host, 0, to_release); + ext4_da_release_space(page->mapping->host, to_release); } /* -- GitLab From 91467bdf6e53058af13fd255375d6634ba0c70e0 Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Fri, 18 Jul 2008 19:07:53 +0200 Subject: [PATCH 0079/1024] x86: move dma32_reserve_bootmem() after reserve_crashkernel() On a x86-64 machine (nothing special I could encounter) I had the problem that crashkernel reservation with the usual "64M@16M" failed. While debugging that, I encountered that dma32_reserve_bootmem() reserves a memory region which is in that area. Because dma32_reserve_bootmem() does not rely on a specific offset but crashkernel does, it makes sense to move the dma32_reserve_bootmem() reservation down a bit. I tested that patch and it works without problems. I don't see any negative effects of that move, but maybe I oversaw something ... While we strictly don't need that patch in 2.6.27 because we have the automatic, dynamic offset detection, it makes sense to also include it here because: - it's easier to get it in -stable then, - many people are still used to the 'crashkernel=...@16M' syntax, - not everybody may be using a reloatable kernel. Signed-off-by: Bernhard Walle Cc: kexec@lists.infradead.org Cc: vgoyal@redhat.com Cc: akpm@linux-foundation.org Cc: Bernhard Walle Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 531b55b8e81..74d110ef269 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -792,10 +792,6 @@ void __init setup_arch(char **cmdline_p) initmem_init(0, max_pfn); -#ifdef CONFIG_X86_64 - dma32_reserve_bootmem(); -#endif - #ifdef CONFIG_ACPI_SLEEP /* * Reserve low memory region for sleep support. @@ -810,6 +806,15 @@ void __init setup_arch(char **cmdline_p) #endif reserve_crashkernel(); +#ifdef CONFIG_X86_64 + /* + * dma32_reserve_bootmem() allocates bootmem which may conflict + * with the crashkernel command line, so do that after + * reserve_crashkernel() + */ + dma32_reserve_bootmem(); +#endif + reserve_ibft_region(); #ifdef CONFIG_KVM_CLOCK -- GitLab From c9f21aaff1d1fb5629325130af469532d19beb93 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 23 Jul 2008 12:05:51 -0700 Subject: [PATCH 0080/1024] md: move async_tx_issue_pending_all outside spin_lock_irq Some dma drivers need to call spin_lock_bh in their device_issue_pending routines. This change avoids: WARNING: at kernel/softirq.c:136 local_bh_enable_ip+0x3a/0x85() Signed-off-by: Dan Williams --- drivers/md/raid5.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 42a480ba767..8a6f101d322 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3809,10 +3809,8 @@ static void raid5d(mddev_t *mddev) sh = __get_priority_stripe(conf); - if (!sh) { - async_tx_issue_pending_all(); + if (!sh) break; - } spin_unlock_irq(&conf->device_lock); handled++; @@ -3825,6 +3823,7 @@ static void raid5d(mddev_t *mddev) spin_unlock_irq(&conf->device_lock); + async_tx_issue_pending_all(); unplug_slaves(mddev); pr_debug("--- raid5d inactive\n"); -- GitLab From 2339788376e2d69a9154130e4dacd5b21ce63094 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 23 Jul 2008 20:05:34 -0700 Subject: [PATCH 0081/1024] md: fix merge error The original STRIPE_OP_IO removal patch had the following hunk: - for (i = conf->raid_disks; i--; ) { + for (i = conf->raid_disks; i--; ) set_bit(R5_Wantwrite, &sh->dev[i].flags); - if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending)) - sh->ops.count++; - } However it appears the hunk became broken after merging: - for (i = conf->raid_disks; i--; ) { + for (i = conf->raid_disks; i--; ) set_bit(R5_Wantwrite, &sh->dev[i].flags); set_bit(R5_LOCKED, &dev->flags); s.locked++; - if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending)) - sh->ops.count++; - } Signed-off-by: Dan Williams --- drivers/md/raid5.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 8a6f101d322..46132fca346 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2717,10 +2717,11 @@ static void handle_stripe5(struct stripe_head *sh) if (sh->reconstruct_state == reconstruct_state_result) { sh->reconstruct_state = reconstruct_state_idle; clear_bit(STRIPE_EXPANDING, &sh->state); - for (i = conf->raid_disks; i--; ) + for (i = conf->raid_disks; i--; ) { set_bit(R5_Wantwrite, &sh->dev[i].flags); - set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_LOCKED, &sh->dev[i].flags); s.locked++; + } } if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state) && -- GitLab From d8e64406a037a64444175730294e449c9e21f5ec Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 23 Jul 2008 13:09:48 -0700 Subject: [PATCH 0082/1024] md: delay notification of 'active_idle' to the recovery thread sysfs_notify might sleep, so do not call it from md_safemode_timeout. Signed-off-by: Dan Williams --- drivers/md/md.c | 5 ++++- include/linux/raid/md_k.h | 1 + 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index c2ff77ccec5..0f1b8309642 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3483,7 +3483,7 @@ static void md_safemode_timeout(unsigned long data) if (!atomic_read(&mddev->writes_pending)) { mddev->safemode = 1; if (mddev->external) - sysfs_notify(&mddev->kobj, NULL, "array_state"); + set_bit(MD_NOTIFY_ARRAY_STATE, &mddev->flags); } md_wakeup_thread(mddev->thread); } @@ -6051,6 +6051,9 @@ void md_check_recovery(mddev_t *mddev) if (mddev->bitmap) bitmap_daemon_work(mddev->bitmap); + if (test_and_clear_bit(MD_NOTIFY_ARRAY_STATE, &mddev->flags)) + sysfs_notify(&mddev->kobj, NULL, "array_state"); + if (mddev->ro) return; diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h index 9f2549ac0e2..c200b9a34af 100644 --- a/include/linux/raid/md_k.h +++ b/include/linux/raid/md_k.h @@ -128,6 +128,7 @@ struct mddev_s #define MD_CHANGE_DEVS 0 /* Some device status has changed */ #define MD_CHANGE_CLEAN 1 /* transition to or from 'clean' */ #define MD_CHANGE_PENDING 2 /* superblock update in progress */ +#define MD_NOTIFY_ARRAY_STATE 3 /* atomic context wants to notify userspace */ int ro; -- GitLab From 4dfce4075aa4e2eee35e52a78dbabfe37d94c908 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Mon, 30 Jun 2008 19:06:40 +0200 Subject: [PATCH 0083/1024] WAN: cosmetic changes to generic HDLC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/hdlc.c | 25 ++++++++++++------------- drivers/net/wan/hdlc_cisco.c | 29 ++++++++++++++--------------- drivers/net/wan/hdlc_fr.c | 19 +++++++++---------- drivers/net/wan/hdlc_ppp.c | 15 +++++++-------- drivers/net/wan/hdlc_raw.c | 15 +++++++-------- drivers/net/wan/hdlc_raw_eth.c | 17 ++++++++--------- drivers/net/wan/hdlc_x25.c | 17 ++++++++--------- 7 files changed, 65 insertions(+), 72 deletions(-) diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c index e3a536477c7..1f2a140c9f7 100644 --- a/drivers/net/wan/hdlc.c +++ b/drivers/net/wan/hdlc.c @@ -22,20 +22,19 @@ * - proto->start() and stop() are called with spin_lock_irq held. */ -#include -#include -#include -#include #include +#include #include +#include #include -#include +#include +#include +#include #include -#include -#include +#include #include -#include -#include +#include +#include #include @@ -109,7 +108,7 @@ static int hdlc_device_event(struct notifier_block *this, unsigned long event, if (dev->get_stats != hdlc_get_stats) return NOTIFY_DONE; /* not an HDLC device */ - + if (event != NETDEV_CHANGE) return NOTIFY_DONE; /* Only interrested in carrier changes */ @@ -357,7 +356,7 @@ static struct packet_type hdlc_packet_type = { static struct notifier_block hdlc_notifier = { - .notifier_call = hdlc_device_event, + .notifier_call = hdlc_device_event, }; @@ -367,8 +366,8 @@ static int __init hdlc_module_init(void) printk(KERN_INFO "%s\n", version); if ((result = register_netdevice_notifier(&hdlc_notifier)) != 0) - return result; - dev_add_pack(&hdlc_packet_type); + return result; + dev_add_pack(&hdlc_packet_type); return 0; } diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c index 849819c2552..44e64b15dbd 100644 --- a/drivers/net/wan/hdlc_cisco.c +++ b/drivers/net/wan/hdlc_cisco.c @@ -9,19 +9,18 @@ * as published by the Free Software Foundation. */ -#include -#include -#include -#include #include +#include #include +#include #include -#include +#include +#include #include -#include -#include +#include #include -#include +#include +#include #undef DEBUG_HARD_HEADER @@ -68,9 +67,9 @@ struct cisco_state { static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr); -static inline struct cisco_state * state(hdlc_device *hdlc) +static inline struct cisco_state* state(hdlc_device *hdlc) { - return(struct cisco_state *)(hdlc->state); + return (struct cisco_state *)hdlc->state; } @@ -172,7 +171,7 @@ static int cisco_rx(struct sk_buff *skb) data->address != CISCO_UNICAST) goto rx_error; - switch(ntohs(data->protocol)) { + switch (ntohs(data->protocol)) { case CISCO_SYS_INFO: /* Packet is not needed, drop it. */ dev_kfree_skb_any(skb); @@ -336,7 +335,7 @@ static struct hdlc_proto proto = { static const struct header_ops cisco_header_ops = { .create = cisco_hard_header, }; - + static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr) { cisco_proto __user *cisco_s = ifr->ifr_settings.ifs_ifsu.cisco; @@ -359,10 +358,10 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr) return 0; case IF_PROTO_CISCO: - if(!capable(CAP_NET_ADMIN)) + if (!capable(CAP_NET_ADMIN)) return -EPERM; - if(dev->flags & IFF_UP) + if (dev->flags & IFF_UP) return -EBUSY; if (copy_from_user(&new_settings, cisco_s, size)) @@ -372,7 +371,7 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr) new_settings.timeout < 2) return -EINVAL; - result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); + result = hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); if (result) return result; diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index 62e93dac6b1..d3d5055741a 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -33,20 +33,19 @@ */ -#include -#include -#include -#include #include +#include +#include #include +#include #include -#include +#include +#include #include -#include -#include +#include #include -#include -#include +#include +#include #undef DEBUG_PKT #undef DEBUG_ECN @@ -96,7 +95,7 @@ typedef struct { unsigned ea1: 1; unsigned cr: 1; unsigned dlcih: 6; - + unsigned ea2: 1; unsigned de: 1; unsigned becn: 1; diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c index 00308337928..4efe9e6d32d 100644 --- a/drivers/net/wan/hdlc_ppp.c +++ b/drivers/net/wan/hdlc_ppp.c @@ -9,19 +9,18 @@ * as published by the Free Software Foundation. */ -#include -#include -#include -#include #include +#include #include +#include #include -#include +#include +#include #include -#include -#include +#include #include -#include +#include +#include #include struct ppp_state { diff --git a/drivers/net/wan/hdlc_raw.c b/drivers/net/wan/hdlc_raw.c index bbbb819d764..8612311748f 100644 --- a/drivers/net/wan/hdlc_raw.c +++ b/drivers/net/wan/hdlc_raw.c @@ -9,19 +9,18 @@ * as published by the Free Software Foundation. */ -#include -#include -#include -#include #include +#include #include +#include #include -#include +#include +#include #include -#include -#include +#include #include -#include +#include +#include static int raw_ioctl(struct net_device *dev, struct ifreq *ifr); diff --git a/drivers/net/wan/hdlc_raw_eth.c b/drivers/net/wan/hdlc_raw_eth.c index 26dee600506..a13fc320752 100644 --- a/drivers/net/wan/hdlc_raw_eth.c +++ b/drivers/net/wan/hdlc_raw_eth.c @@ -9,20 +9,19 @@ * as published by the Free Software Foundation. */ -#include -#include -#include -#include #include +#include +#include #include +#include #include -#include +#include +#include #include -#include -#include +#include #include -#include -#include +#include +#include static int raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr); diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c index e808720030e..8b7e5d2e2ac 100644 --- a/drivers/net/wan/hdlc_x25.c +++ b/drivers/net/wan/hdlc_x25.c @@ -9,20 +9,19 @@ * as published by the Free Software Foundation. */ -#include -#include -#include -#include #include +#include #include -#include -#include -#include #include +#include +#include #include +#include +#include +#include #include -#include - +#include +#include #include static int x25_ioctl(struct net_device *dev, struct ifreq *ifr); -- GitLab From 86f584f08767160a745a50ed675e12b8f8bfbf30 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 1 Jul 2008 15:10:11 +0200 Subject: [PATCH 0084/1024] Remove bogus dosyncppp variable from synclink drivers. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/char/pcmcia/synclink_cs.c | 4 ---- drivers/char/synclink.c | 4 ---- drivers/char/synclink_gt.c | 5 ----- drivers/char/synclinkmp.c | 4 ---- 4 files changed, 17 deletions(-) diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index b694d430f10..36a0afa89aa 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -232,7 +232,6 @@ typedef struct _mgslpc_info { /* SPPP/Cisco HDLC device parts */ int netcount; - int dosyncppp; spinlock_t netlock; #if SYNCLINK_GENERIC_HDLC @@ -459,13 +458,11 @@ static int ttymajor=0; static int debug_level = 0; static int maxframe[MAX_DEVICE_COUNT] = {0,}; -static int dosyncppp[MAX_DEVICE_COUNT] = {1,1,1,1}; module_param(break_on_load, bool, 0); module_param(ttymajor, int, 0); module_param(debug_level, int, 0); module_param_array(maxframe, int, NULL, 0); -module_param_array(dosyncppp, int, NULL, 0); MODULE_LICENSE("GPL"); @@ -2914,7 +2911,6 @@ static void mgslpc_add_device(MGSLPC_INFO *info) if (info->line < MAX_DEVICE_COUNT) { if (maxframe[info->line]) info->max_frame_size = maxframe[info->line]; - info->dosyncppp = dosyncppp[info->line]; } mgslpc_device_count++; diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index 527d220aa4a..2b9e930097e 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -304,7 +304,6 @@ struct mgsl_struct { /* generic HDLC device parts */ int netcount; - int dosyncppp; spinlock_t netlock; #if SYNCLINK_GENERIC_HDLC @@ -868,7 +867,6 @@ static int irq[MAX_ISA_DEVICES]; static int dma[MAX_ISA_DEVICES]; static int debug_level; static int maxframe[MAX_TOTAL_DEVICES]; -static int dosyncppp[MAX_TOTAL_DEVICES]; static int txdmabufs[MAX_TOTAL_DEVICES]; static int txholdbufs[MAX_TOTAL_DEVICES]; @@ -879,7 +877,6 @@ module_param_array(irq, int, NULL, 0); module_param_array(dma, int, NULL, 0); module_param(debug_level, int, 0); module_param_array(maxframe, int, NULL, 0); -module_param_array(dosyncppp, int, NULL, 0); module_param_array(txdmabufs, int, NULL, 0); module_param_array(txholdbufs, int, NULL, 0); @@ -4257,7 +4254,6 @@ static void mgsl_add_device( struct mgsl_struct *info ) if (info->line < MAX_TOTAL_DEVICES) { if (maxframe[info->line]) info->max_frame_size = maxframe[info->line]; - info->dosyncppp = dosyncppp[info->line]; if (txdmabufs[info->line]) { info->num_tx_dma_buffers = txdmabufs[info->line]; diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 2c3e43bb2cc..88083b06626 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -128,17 +128,14 @@ static int slgt_device_count; static int ttymajor; static int debug_level; static int maxframe[MAX_DEVICES]; -static int dosyncppp[MAX_DEVICES]; module_param(ttymajor, int, 0); module_param(debug_level, int, 0); module_param_array(maxframe, int, NULL, 0); -module_param_array(dosyncppp, int, NULL, 0); MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned"); MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail"); MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)"); -MODULE_PARM_DESC(dosyncppp, "Enable synchronous net device, 0=disable 1=enable"); /* * tty support and callbacks @@ -348,7 +345,6 @@ struct slgt_info { /* SPPP/Cisco HDLC device parts */ int netcount; - int dosyncppp; spinlock_t netlock; #if SYNCLINK_GENERIC_HDLC struct net_device *netdev; @@ -3385,7 +3381,6 @@ static void add_device(struct slgt_info *info) if (info->line < MAX_DEVICES) { if (maxframe[info->line]) info->max_frame_size = maxframe[info->line]; - info->dosyncppp = dosyncppp[info->line]; } slgt_device_count++; diff --git a/drivers/char/synclinkmp.c b/drivers/char/synclinkmp.c index 5768c413634..f2edfad360d 100644 --- a/drivers/char/synclinkmp.c +++ b/drivers/char/synclinkmp.c @@ -270,7 +270,6 @@ typedef struct _synclinkmp_info { /* SPPP/Cisco HDLC device parts */ int netcount; - int dosyncppp; spinlock_t netlock; #if SYNCLINK_GENERIC_HDLC @@ -469,13 +468,11 @@ static int ttymajor = 0; */ static int debug_level = 0; static int maxframe[MAX_DEVICES] = {0,}; -static int dosyncppp[MAX_DEVICES] = {0,}; module_param(break_on_load, bool, 0); module_param(ttymajor, int, 0); module_param(debug_level, int, 0); module_param_array(maxframe, int, NULL, 0); -module_param_array(dosyncppp, int, NULL, 0); static char *driver_name = "SyncLink MultiPort driver"; static char *driver_version = "$Revision: 4.38 $"; @@ -3751,7 +3748,6 @@ static void add_device(SLMP_INFO *info) if (info->line < MAX_DEVICES) { if (maxframe[info->line]) info->max_frame_size = maxframe[info->line]; - info->dosyncppp = dosyncppp[info->line]; } synclinkmp_device_count++; -- GitLab From efa415840d462caf30002d259db20338b546a94b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 1 Jul 2008 15:28:10 +0200 Subject: [PATCH 0085/1024] Remove bogus variables from syncppp.[ch] MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/syncppp.c | 9 --------- include/net/syncppp.h | 2 -- 2 files changed, 11 deletions(-) diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c index 29b4b94e494..327d58589e1 100644 --- a/drivers/net/wan/syncppp.c +++ b/drivers/net/wan/syncppp.c @@ -230,13 +230,6 @@ static void sppp_input (struct net_device *dev, struct sk_buff *skb) skb->dev=dev; skb_reset_mac_header(skb); - if (dev->flags & IFF_RUNNING) - { - /* Count received bytes, add FCS and one flag */ - sp->ibytes+= skb->len + 3; - sp->ipkts++; - } - if (!pskb_may_pull(skb, PPP_HEADER_LEN)) { /* Too small packet, drop it. */ if (sp->pp_flags & PP_DEBUG) @@ -832,7 +825,6 @@ static void sppp_cp_send (struct sppp *sp, u16 proto, u8 type, sppp_print_bytes ((u8*) (lh+1), len); printk (">\n"); } - sp->obytes += skb->len; /* Control is high priority so it doesn't get queued behind data */ skb->priority=TC_PRIO_CONTROL; skb->dev = dev; @@ -875,7 +867,6 @@ static void sppp_cisco_send (struct sppp *sp, int type, u32 par1, u32 par2) printk (KERN_WARNING "%s: cisco output: <%xh %xh %xh %xh %xh-%xh>\n", dev->name, ntohl (ch->type), ch->par1, ch->par2, ch->rel, ch->time0, ch->time1); - sp->obytes += skb->len; skb->priority=TC_PRIO_CONTROL; skb->dev = dev; skb_queue_tail(&tx_queue, skb); diff --git a/include/net/syncppp.h b/include/net/syncppp.h index e43f4070d89..9e306f7f579 100644 --- a/include/net/syncppp.h +++ b/include/net/syncppp.h @@ -43,8 +43,6 @@ struct sppp u32 pp_rseq; /* remote sequence number */ struct slcp lcp; /* LCP params */ struct sipcp ipcp; /* IPCP params */ - u32 ibytes,obytes; /* Bytes in/out */ - u32 ipkts,opkts; /* Packets in/out */ struct timer_list pp_timer; struct net_device *pp_if; char pp_link_state; /* Link status */ -- GitLab From a24e202e3ffdbd1da45ceab8e60824720c6ab7fd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 1 Jul 2008 20:18:49 +0200 Subject: [PATCH 0086/1024] Remove dead code from wanmain.c, CONFIG_WANPIPE_MULTPPP doesn't exist MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- net/wanrouter/wanmain.c | 26 -------------------------- 1 file changed, 26 deletions(-) diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c index b210a88d096..de4cc975b46 100644 --- a/net/wanrouter/wanmain.c +++ b/net/wanrouter/wanmain.c @@ -567,9 +567,6 @@ static int wanrouter_device_new_if(struct wan_device *wandev, { wanif_conf_t *cnf; struct net_device *dev = NULL; -#ifdef CONFIG_WANPIPE_MULTPPP - struct ppp_device *pppdev=NULL; -#endif int err; if ((wandev->state == WAN_UNCONFIGURED) || (wandev->new_if == NULL)) @@ -588,25 +585,10 @@ static int wanrouter_device_new_if(struct wan_device *wandev, goto out; if (cnf->config_id == WANCONFIG_MPPP) { -#ifdef CONFIG_WANPIPE_MULTPPP - pppdev = kzalloc(sizeof(struct ppp_device), GFP_KERNEL); - err = -ENOBUFS; - if (pppdev == NULL) - goto out; - pppdev->dev = kzalloc(sizeof(struct net_device), GFP_KERNEL); - if (pppdev->dev == NULL) { - kfree(pppdev); - err = -ENOBUFS; - goto out; - } - err = wandev->new_if(wandev, (struct net_device *)pppdev, cnf); - dev = pppdev->dev; -#else printk(KERN_INFO "%s: Wanpipe Mulit-Port PPP support has not been compiled in!\n", wandev->name); err = -EPROTONOSUPPORT; goto out; -#endif } else { dev = kzalloc(sizeof(struct net_device), GFP_KERNEL); err = -ENOBUFS; @@ -661,17 +643,9 @@ static int wanrouter_device_new_if(struct wan_device *wandev, kfree(dev->priv); dev->priv = NULL; -#ifdef CONFIG_WANPIPE_MULTPPP - if (cnf->config_id == WANCONFIG_MPPP) - kfree(pppdev); - else - kfree(dev); -#else /* Sync PPP is disabled */ if (cnf->config_id != WANCONFIG_MPPP) kfree(dev); -#endif - out: kfree(cnf); return err; -- GitLab From a8817d2f6d59b0caeacf6071f56a83164b474a32 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 1 Jul 2008 20:24:10 +0200 Subject: [PATCH 0087/1024] wanmain.c doesn't need syncppp.h MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- net/wanrouter/wanmain.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/wanrouter/wanmain.c b/net/wanrouter/wanmain.c index de4cc975b46..7f07152bc10 100644 --- a/net/wanrouter/wanmain.c +++ b/net/wanrouter/wanmain.c @@ -57,7 +57,6 @@ #include /* vmalloc, vfree */ #include /* copy_to/from_user */ #include /* __initfunc et al. */ -#include #define KMEM_SAFETYZONE 8 -- GitLab From c1a0f0cdf95569c06946eed81c2fc7e04b272db4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 1 Jul 2008 20:35:06 +0200 Subject: [PATCH 0088/1024] WAN: Remove unneeded "#include " MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/dscc4.c | 1 - drivers/net/wan/lmc/lmc_media.c | 2 -- drivers/net/wan/pc300_drv.c | 2 -- 3 files changed, 5 deletions(-) diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c index 50ef5b4efd6..f5d55ad0226 100644 --- a/drivers/net/wan/dscc4.c +++ b/drivers/net/wan/dscc4.c @@ -103,7 +103,6 @@ #include #include #include -#include #include #include diff --git a/drivers/net/wan/lmc/lmc_media.c b/drivers/net/wan/lmc/lmc_media.c index 8aa461c941c..1cc5834ebbc 100644 --- a/drivers/net/wan/lmc/lmc_media.c +++ b/drivers/net/wan/lmc/lmc_media.c @@ -16,8 +16,6 @@ #include #include -#include - #include /* Processor type for cache alignment. */ #include #include diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index 33417052775..694df44d2e4 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -227,8 +227,6 @@ static char rcsid[] = #include #include #include - -#include #include #include -- GitLab From ea966165a306ad4243b7bf62c848288c4286a8b7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 1 Jul 2008 21:14:43 +0200 Subject: [PATCH 0089/1024] WAN: Remove dead code from PC300 driver, part #1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/pc300.h | 36 +----------------------------------- drivers/net/wan/pc300_drv.c | 18 +++--------------- 2 files changed, 4 insertions(+), 50 deletions(-) diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h index 63e9fcf31fb..cd24ea586db 100644 --- a/drivers/net/wan/pc300.h +++ b/drivers/net/wan/pc300.h @@ -100,7 +100,6 @@ #define _PC300_H #include -#include #include "hd64572.h" #include "pc300-falc-lh.h" @@ -112,19 +111,11 @@ typedef __u16 ucshort; /* 16 bits, unsigned */ typedef __u8 ucchar; /* 8 bits, unsigned */ #endif /* CY_TYPES */ -#define PC300_PROTO_MLPPP 1 +#define PC300_PROTO_MLPPP 1 -#define PC300_KERNEL "2.4.x" /* Kernel supported by this driver */ - -#define PC300_DEVNAME "hdlc" /* Dev. name base (for hdlc0, hdlc1, etc.) */ -#define PC300_MAXINDEX 100 /* Max dev. name index (the '0' in hdlc0) */ - -#define PC300_MAXCARDS 4 /* Max number of cards per system */ #define PC300_MAXCHAN 2 /* Number of channels per card */ -#define PC300_PLX_WIN 0x80 /* PLX control window size (128b) */ #define PC300_RAMSIZE 0x40000 /* RAM window size (256Kb) */ -#define PC300_SCASIZE 0x400 /* SCA window size (1Kb) */ #define PC300_FALCSIZE 0x400 /* FALC window size (1Kb) */ #define PC300_OSC_CLOCK 24576000 @@ -160,7 +151,6 @@ typedef __u8 ucchar; /* 8 bits, unsigned */ * Memory access functions/macros * * (required to support Alpha systems) * ***************************************/ -#ifdef __KERNEL__ #define cpc_writeb(port,val) {writeb((ucchar)(val),(port)); mb();} #define cpc_writew(port,val) {writew((ushort)(val),(port)); mb();} #define cpc_writel(port,val) {writel((uclong)(val),(port)); mb();} @@ -169,17 +159,6 @@ typedef __u8 ucchar; /* 8 bits, unsigned */ #define cpc_readw(port) readw(port) #define cpc_readl(port) readl(port) -#else /* __KERNEL__ */ -#define cpc_writeb(port,val) (*(volatile ucchar *)(port) = (ucchar)(val)) -#define cpc_writew(port,val) (*(volatile ucshort *)(port) = (ucshort)(val)) -#define cpc_writel(port,val) (*(volatile uclong *)(port) = (uclong)(val)) - -#define cpc_readb(port) (*(volatile ucchar *)(port)) -#define cpc_readw(port) (*(volatile ucshort *)(port)) -#define cpc_readl(port) (*(volatile uclong *)(port)) - -#endif /* __KERNEL__ */ - /****** Data Structures *****************************************************/ /* @@ -321,24 +300,15 @@ typedef struct pc300patterntst { } pc300patterntst_t; typedef struct pc300dev { - void *if_ptr; /* General purpose pointer */ struct pc300ch *chan; ucchar trace_on; uclong line_on; /* DCD(X.21, RSV) / sync(TE) change counters */ uclong line_off; -#ifdef __KERNEL__ char name[16]; struct net_device *dev; - - void *private; - struct sk_buff *tx_skb; - union { /* This union has all the protocol-specific structures */ - struct ppp_device pppdev; - }ifu; #ifdef CONFIG_PC300_MLPPP void *cpc_tty; /* information to PC300 TTY driver */ #endif -#endif /* __KERNEL__ */ }pc300dev_t; typedef struct pc300hw { @@ -401,9 +371,7 @@ typedef struct pc300ch { typedef struct pc300 { pc300hw_t hw; /* hardware config. */ pc300ch_t chan[PC300_MAXCHAN]; -#ifdef __KERNEL__ spinlock_t card_lock; -#endif /* __KERNEL__ */ } pc300_t; typedef struct pc300conf { @@ -471,12 +439,10 @@ enum pc300_loopback_cmds { #define PC300_TX_QUEUE_LEN 100 #define PC300_DEF_MTU 1600 -#ifdef __KERNEL__ /* Function Prototypes */ void tx_dma_start(pc300_t *, int); int cpc_open(struct net_device *dev); int cpc_set_media(hdlc_device *, int); -#endif /* __KERNEL__ */ #endif /* _PC300_H */ diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index 694df44d2e4..3226a745571 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -3150,19 +3150,10 @@ int cpc_open(struct net_device *dev) printk("pc300: cpc_open"); #endif -#ifdef FIXME - if (hdlc->proto.id == IF_PROTO_PPP) { - d->if_ptr = &hdlc->state.ppp.pppdev; - } -#endif - result = hdlc_open(dev); - if (/* FIXME hdlc->proto.id == IF_PROTO_PPP*/ 0) { - dev->priv = d; - } - if (result) { + + if (result) return result; - } sprintf(ifr.ifr_name, "%s", dev->name); result = cpc_opench(d); @@ -3195,9 +3186,7 @@ static int cpc_close(struct net_device *dev) CPC_UNLOCK(card, flags); hdlc_close(dev); - if (/* FIXME hdlc->proto.id == IF_PROTO_PPP*/ 0) { - d->if_ptr = NULL; - } + #ifdef CONFIG_PC300_MLPPP if (chan->conf.proto == PC300_PROTO_MLPPP) { cpc_tty_unregister_service(d); @@ -3358,7 +3347,6 @@ static void cpc_init_card(pc300_t * card) chan->nfree_tx_bd = N_DMA_TX_BUF; d->chan = chan; - d->tx_skb = NULL; d->trace_on = 0; d->line_on = 0; d->line_off = 0; -- GitLab From c36936ce4bc6d2a0d6520bd798e85abbb139c2aa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 1 Jul 2008 21:24:14 +0200 Subject: [PATCH 0090/1024] WAN: Remove dead code from PC300 driver, part #2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/pc300.h | 8 -------- drivers/net/wan/pc300_drv.c | 6 +----- 2 files changed, 1 insertion(+), 13 deletions(-) diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h index cd24ea586db..cee799dabd9 100644 --- a/drivers/net/wan/pc300.h +++ b/drivers/net/wan/pc300.h @@ -103,13 +103,9 @@ #include "hd64572.h" #include "pc300-falc-lh.h" -#ifndef CY_TYPES -#define CY_TYPES -typedef __u64 ucdouble; /* 64 bits, unsigned */ typedef __u32 uclong; /* 32 bits, unsigned */ typedef __u16 ucshort; /* 16 bits, unsigned */ typedef __u8 ucchar; /* 8 bits, unsigned */ -#endif /* CY_TYPES */ #define PC300_PROTO_MLPPP 1 @@ -345,7 +341,6 @@ typedef struct pc300chconf { raw_hdlc_proto proto_settings; /* Encoding, parity (CRC) */ uclong media; /* HW media (RS232, V.35, etc.) */ uclong proto; /* Protocol (PPP, X.25, etc.) */ - ucchar monitor; /* Monitor mode (0 = off, !0 = on) */ /* TE-specific parameters */ ucchar lcode; /* Line Code (AMI, B8ZS, etc.) */ @@ -440,9 +435,6 @@ enum pc300_loopback_cmds { #define PC300_DEF_MTU 1600 /* Function Prototypes */ -void tx_dma_start(pc300_t *, int); int cpc_open(struct net_device *dev); -int cpc_set_media(hdlc_device *, int); #endif /* _PC300_H */ - diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index 3226a745571..65c40cd4a08 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -1805,11 +1805,7 @@ static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev) int i; #endif - if (chan->conf.monitor) { - /* In monitor mode no Tx is done: ignore packet */ - dev_kfree_skb(skb); - return 0; - } else if (!netif_carrier_ok(dev)) { + if (!netif_carrier_ok(dev)) { /* DCD must be OFF: drop packet */ dev_kfree_skb(skb); dev->stats.tx_errors++; -- GitLab From b22267d3883ebc76093e9f36c4c738125e092402 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 1 Jul 2008 21:43:39 +0200 Subject: [PATCH 0091/1024] WAN: Convert PC300 driver to use normal u8/u16/u32 types MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/pc300.h | 184 ++++++++++++++++++------------------ drivers/net/wan/pc300_drv.c | 120 +++++++++++------------ 2 files changed, 150 insertions(+), 154 deletions(-) diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h index cee799dabd9..2e4f84f6cad 100644 --- a/drivers/net/wan/pc300.h +++ b/drivers/net/wan/pc300.h @@ -103,10 +103,6 @@ #include "hd64572.h" #include "pc300-falc-lh.h" -typedef __u32 uclong; /* 32 bits, unsigned */ -typedef __u16 ucshort; /* 16 bits, unsigned */ -typedef __u8 ucchar; /* 8 bits, unsigned */ - #define PC300_PROTO_MLPPP 1 #define PC300_MAXCHAN 2 /* Number of channels per card */ @@ -147,9 +143,9 @@ typedef __u8 ucchar; /* 8 bits, unsigned */ * Memory access functions/macros * * (required to support Alpha systems) * ***************************************/ -#define cpc_writeb(port,val) {writeb((ucchar)(val),(port)); mb();} +#define cpc_writeb(port,val) {writeb((u8)(val),(port)); mb();} #define cpc_writew(port,val) {writew((ushort)(val),(port)); mb();} -#define cpc_writel(port,val) {writel((uclong)(val),(port)); mb();} +#define cpc_writel(port,val) {writel((u32)(val),(port)); mb();} #define cpc_readb(port) readb(port) #define cpc_readw(port) readw(port) @@ -163,15 +159,15 @@ typedef __u8 ucchar; /* 8 bits, unsigned */ * (memory mapped). */ struct RUNTIME_9050 { - uclong loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */ - uclong loc_rom_range; /* 10h : Local ROM Range */ - uclong loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */ - uclong loc_rom_base; /* 24h : Local ROM Base */ - uclong loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */ - uclong rom_bus_descr; /* 38h : ROM Bus Descriptor */ - uclong cs_base[4]; /* 3C-48h : Chip Select Base Addrs */ - uclong intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */ - uclong init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */ + u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */ + u32 loc_rom_range; /* 10h : Local ROM Range */ + u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */ + u32 loc_rom_base; /* 24h : Local ROM Base */ + u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */ + u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */ + u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */ + u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */ + u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */ }; #define PLX_9050_LINT1_ENABLE 0x01 @@ -215,66 +211,66 @@ struct RUNTIME_9050 { #define PC300_FALC_MAXLOOP 0x0000ffff /* for falc_issue_cmd() */ typedef struct falc { - ucchar sync; /* If true FALC is synchronized */ - ucchar active; /* if TRUE then already active */ - ucchar loop_active; /* if TRUE a line loopback UP was received */ - ucchar loop_gen; /* if TRUE a line loopback UP was issued */ + u8 sync; /* If true FALC is synchronized */ + u8 active; /* if TRUE then already active */ + u8 loop_active; /* if TRUE a line loopback UP was received */ + u8 loop_gen; /* if TRUE a line loopback UP was issued */ - ucchar num_channels; - ucchar offset; /* 1 for T1, 0 for E1 */ - ucchar full_bandwidth; + u8 num_channels; + u8 offset; /* 1 for T1, 0 for E1 */ + u8 full_bandwidth; - ucchar xmb_cause; - ucchar multiframe_mode; + u8 xmb_cause; + u8 multiframe_mode; /* Statistics */ - ucshort pden; /* Pulse Density violation count */ - ucshort los; /* Loss of Signal count */ - ucshort losr; /* Loss of Signal recovery count */ - ucshort lfa; /* Loss of frame alignment count */ - ucshort farec; /* Frame Alignment Recovery count */ - ucshort lmfa; /* Loss of multiframe alignment count */ - ucshort ais; /* Remote Alarm indication Signal count */ - ucshort sec; /* One-second timer */ - ucshort es; /* Errored second */ - ucshort rai; /* remote alarm received */ - ucshort bec; - ucshort fec; - ucshort cvc; - ucshort cec; - ucshort ebc; + u16 pden; /* Pulse Density violation count */ + u16 los; /* Loss of Signal count */ + u16 losr; /* Loss of Signal recovery count */ + u16 lfa; /* Loss of frame alignment count */ + u16 farec; /* Frame Alignment Recovery count */ + u16 lmfa; /* Loss of multiframe alignment count */ + u16 ais; /* Remote Alarm indication Signal count */ + u16 sec; /* One-second timer */ + u16 es; /* Errored second */ + u16 rai; /* remote alarm received */ + u16 bec; + u16 fec; + u16 cvc; + u16 cec; + u16 ebc; /* Status */ - ucchar red_alarm; - ucchar blue_alarm; - ucchar loss_fa; - ucchar yellow_alarm; - ucchar loss_mfa; - ucchar prbs; + u8 red_alarm; + u8 blue_alarm; + u8 loss_fa; + u8 yellow_alarm; + u8 loss_mfa; + u8 prbs; } falc_t; typedef struct falc_status { - ucchar sync; /* If true FALC is synchronized */ - ucchar red_alarm; - ucchar blue_alarm; - ucchar loss_fa; - ucchar yellow_alarm; - ucchar loss_mfa; - ucchar prbs; + u8 sync; /* If true FALC is synchronized */ + u8 red_alarm; + u8 blue_alarm; + u8 loss_fa; + u8 yellow_alarm; + u8 loss_mfa; + u8 prbs; } falc_status_t; typedef struct rsv_x21_status { - ucchar dcd; - ucchar dsr; - ucchar cts; - ucchar rts; - ucchar dtr; + u8 dcd; + u8 dsr; + u8 cts; + u8 rts; + u8 dtr; } rsv_x21_status_t; typedef struct pc300stats { int hw_type; - uclong line_on; - uclong line_off; + u32 line_on; + u32 line_off; struct net_device_stats gen_stats; falc_t te_stats; } pc300stats_t; @@ -292,14 +288,14 @@ typedef struct pc300loopback { typedef struct pc300patterntst { char patrntst_on; /* 0 - off; 1 - on; 2 - read num_errors */ - ucshort num_errors; + u16 num_errors; } pc300patterntst_t; typedef struct pc300dev { struct pc300ch *chan; - ucchar trace_on; - uclong line_on; /* DCD(X.21, RSV) / sync(TE) change counters */ - uclong line_off; + u8 trace_on; + u32 line_on; /* DCD(X.21, RSV) / sync(TE) change counters */ + u32 line_off; char name[16]; struct net_device *dev; #ifdef CONFIG_PC300_MLPPP @@ -312,42 +308,42 @@ typedef struct pc300hw { int bus; /* Bus (PCI, PMC, etc.) */ int nchan; /* number of channels */ int irq; /* interrupt request level */ - uclong clock; /* Board clock */ - ucchar cpld_id; /* CPLD ID (TE only) */ - ucshort cpld_reg1; /* CPLD reg 1 (TE only) */ - ucshort cpld_reg2; /* CPLD reg 2 (TE only) */ - ucshort gpioc_reg; /* PLX GPIOC reg */ - ucshort intctl_reg; /* PLX Int Ctrl/Status reg */ - uclong iophys; /* PLX registers I/O base */ - uclong iosize; /* PLX registers I/O size */ - uclong plxphys; /* PLX registers MMIO base (physical) */ + u32 clock; /* Board clock */ + u8 cpld_id; /* CPLD ID (TE only) */ + u16 cpld_reg1; /* CPLD reg 1 (TE only) */ + u16 cpld_reg2; /* CPLD reg 2 (TE only) */ + u16 gpioc_reg; /* PLX GPIOC reg */ + u16 intctl_reg; /* PLX Int Ctrl/Status reg */ + u32 iophys; /* PLX registers I/O base */ + u32 iosize; /* PLX registers I/O size */ + u32 plxphys; /* PLX registers MMIO base (physical) */ void __iomem * plxbase; /* PLX registers MMIO base (virtual) */ - uclong plxsize; /* PLX registers MMIO size */ - uclong scaphys; /* SCA registers MMIO base (physical) */ + u32 plxsize; /* PLX registers MMIO size */ + u32 scaphys; /* SCA registers MMIO base (physical) */ void __iomem * scabase; /* SCA registers MMIO base (virtual) */ - uclong scasize; /* SCA registers MMIO size */ - uclong ramphys; /* On-board RAM MMIO base (physical) */ + u32 scasize; /* SCA registers MMIO size */ + u32 ramphys; /* On-board RAM MMIO base (physical) */ void __iomem * rambase; /* On-board RAM MMIO base (virtual) */ - uclong alloc_ramsize; /* RAM MMIO size allocated by the PCI bridge */ - uclong ramsize; /* On-board RAM MMIO size */ - uclong falcphys; /* FALC registers MMIO base (physical) */ + u32 alloc_ramsize; /* RAM MMIO size allocated by the PCI bridge */ + u32 ramsize; /* On-board RAM MMIO size */ + u32 falcphys; /* FALC registers MMIO base (physical) */ void __iomem * falcbase;/* FALC registers MMIO base (virtual) */ - uclong falcsize; /* FALC registers MMIO size */ + u32 falcsize; /* FALC registers MMIO size */ } pc300hw_t; typedef struct pc300chconf { - sync_serial_settings phys_settings; /* Clock type/rate (in bps), + sync_serial_settings phys_settings; /* Clock type/rate (in bps), loopback mode */ raw_hdlc_proto proto_settings; /* Encoding, parity (CRC) */ - uclong media; /* HW media (RS232, V.35, etc.) */ - uclong proto; /* Protocol (PPP, X.25, etc.) */ + u32 media; /* HW media (RS232, V.35, etc.) */ + u32 proto; /* Protocol (PPP, X.25, etc.) */ /* TE-specific parameters */ - ucchar lcode; /* Line Code (AMI, B8ZS, etc.) */ - ucchar fr_mode; /* Frame Mode (ESF, D4, etc.) */ - ucchar lbo; /* Line Build Out */ - ucchar rx_sens; /* Rx Sensitivity (long- or short-haul) */ - uclong tslot_bitmap; /* bit[i]=1 => timeslot _i_ is active */ + u8 lcode; /* Line Code (AMI, B8ZS, etc.) */ + u8 fr_mode; /* Frame Mode (ESF, D4, etc.) */ + u8 lbo; /* Line Build Out */ + u8 rx_sens; /* Rx Sensitivity (long- or short-haul) */ + u32 tslot_bitmap; /* bit[i]=1 => timeslot _i_ is active */ } pc300chconf_t; typedef struct pc300ch { @@ -355,12 +351,12 @@ typedef struct pc300ch { int channel; pc300dev_t d; pc300chconf_t conf; - ucchar tx_first_bd; /* First TX DMA block descr. w/ data */ - ucchar tx_next_bd; /* Next free TX DMA block descriptor */ - ucchar rx_first_bd; /* First free RX DMA block descriptor */ - ucchar rx_last_bd; /* Last free RX DMA block descriptor */ - ucchar nfree_tx_bd; /* Number of free TX DMA block descriptors */ - falc_t falc; /* FALC structure (TE only) */ + u8 tx_first_bd; /* First TX DMA block descr. w/ data */ + u8 tx_next_bd; /* Next free TX DMA block descriptor */ + u8 rx_first_bd; /* First free RX DMA block descriptor */ + u8 rx_last_bd; /* Last free RX DMA block descriptor */ + u8 nfree_tx_bd; /* Number of free TX DMA block descriptors */ + falc_t falc; /* FALC structure (TE only) */ } pc300ch_t; typedef struct pc300 { diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index 65c40cd4a08..d0a8d1e352a 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -283,8 +283,8 @@ static void rx_dma_buf_init(pc300_t *, int); static void tx_dma_buf_check(pc300_t *, int); static void rx_dma_buf_check(pc300_t *, int); static irqreturn_t cpc_intr(int, void *); -static int clock_rate_calc(uclong, uclong, int *); -static uclong detect_ram(pc300_t *); +static int clock_rate_calc(u32, u32, int *); +static u32 detect_ram(pc300_t *); static void plx_init(pc300_t *); static void cpc_trace(struct net_device *, struct sk_buff *, char); static int cpc_attach(struct net_device *, unsigned short, unsigned short); @@ -309,10 +309,10 @@ static void tx_dma_buf_pt_init(pc300_t * card, int ch) + DMA_TX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); for (i = 0; i < N_DMA_TX_BUF; i++, ptdescr++) { - cpc_writel(&ptdescr->next, (uclong) (DMA_TX_BD_BASE + + cpc_writel(&ptdescr->next, (u32)(DMA_TX_BD_BASE + (ch_factor + ((i + 1) & (N_DMA_TX_BUF - 1))) * sizeof(pcsca_bd_t))); - cpc_writel(&ptdescr->ptbuf, - (uclong) (DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN)); + cpc_writel(&ptdescr->ptbuf, + (u32)(DMA_TX_BASE + (ch_factor + i) * BD_DEF_LEN)); } } @@ -339,10 +339,10 @@ static void rx_dma_buf_pt_init(pc300_t * card, int ch) + DMA_RX_BD_BASE + ch_factor * sizeof(pcsca_bd_t)); for (i = 0; i < N_DMA_RX_BUF; i++, ptdescr++) { - cpc_writel(&ptdescr->next, (uclong) (DMA_RX_BD_BASE + - (ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t))); + cpc_writel(&ptdescr->next, (u32)(DMA_RX_BD_BASE + + (ch_factor + ((i + 1) & (N_DMA_RX_BUF - 1))) * sizeof(pcsca_bd_t))); cpc_writel(&ptdescr->ptbuf, - (uclong) (DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN)); + (u32)(DMA_RX_BASE + (ch_factor + i) * BD_DEF_LEN)); } } @@ -365,8 +365,8 @@ static void tx_dma_buf_check(pc300_t * card, int ch) { volatile pcsca_bd_t __iomem *ptdescr; int i; - ucshort first_bd = card->chan[ch].tx_first_bd; - ucshort next_bd = card->chan[ch].tx_next_bd; + u16 first_bd = card->chan[ch].tx_first_bd; + u16 next_bd = card->chan[ch].tx_next_bd; printk("#CH%d: f_bd = %d(0x%08zx), n_bd = %d(0x%08zx)\n", ch, first_bd, TX_BD_ADDR(ch, first_bd), @@ -390,9 +390,9 @@ static void tx1_dma_buf_check(pc300_t * card, int ch) { volatile pcsca_bd_t __iomem *ptdescr; int i; - ucshort first_bd = card->chan[ch].tx_first_bd; - ucshort next_bd = card->chan[ch].tx_next_bd; - uclong scabase = card->hw.scabase; + u16 first_bd = card->chan[ch].tx_first_bd; + u16 next_bd = card->chan[ch].tx_next_bd; + u32 scabase = card->hw.scabase; printk ("\nnfree_tx_bd = %d \n", card->chan[ch].nfree_tx_bd); printk("#CH%d: f_bd = %d(0x%08x), n_bd = %d(0x%08x)\n", ch, @@ -411,13 +411,13 @@ static void tx1_dma_buf_check(pc300_t * card, int ch) printk("\n"); } #endif - + static void rx_dma_buf_check(pc300_t * card, int ch) { volatile pcsca_bd_t __iomem *ptdescr; int i; - ucshort first_bd = card->chan[ch].rx_first_bd; - ucshort last_bd = card->chan[ch].rx_last_bd; + u16 first_bd = card->chan[ch].rx_first_bd; + u16 last_bd = card->chan[ch].rx_last_bd; int ch_factor; ch_factor = ch * N_DMA_RX_BUF; @@ -438,9 +438,9 @@ static void rx_dma_buf_check(pc300_t * card, int ch) static int dma_get_rx_frame_size(pc300_t * card, int ch) { volatile pcsca_bd_t __iomem *ptdescr; - ucshort first_bd = card->chan[ch].rx_first_bd; + u16 first_bd = card->chan[ch].rx_first_bd; int rcvd = 0; - volatile ucchar status; + volatile u8 status; ptdescr = (card->hw.rambase + RX_BD_ADDR(ch, first_bd)); while ((status = cpc_readb(&ptdescr->status)) & DST_OSB) { @@ -460,12 +460,12 @@ static int dma_get_rx_frame_size(pc300_t * card, int ch) * dma_buf_write: writes a frame to the Tx DMA buffers * NOTE: this function writes one frame at a time. */ -static int dma_buf_write(pc300_t * card, int ch, ucchar * ptdata, int len) +static int dma_buf_write(pc300_t *card, int ch, u8 *ptdata, int len) { int i, nchar; volatile pcsca_bd_t __iomem *ptdescr; int tosend = len; - ucchar nbuf = ((len - 1) / BD_DEF_LEN) + 1; + u8 nbuf = ((len - 1) / BD_DEF_LEN) + 1; if (nbuf >= card->chan[ch].nfree_tx_bd) { return -ENOMEM; @@ -507,7 +507,7 @@ static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb) pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; volatile pcsca_bd_t __iomem *ptdescr; int rcvd = 0; - volatile ucchar status; + volatile u8 status; ptdescr = (card->hw.rambase + RX_BD_ADDR(ch, chan->rx_first_bd)); @@ -561,8 +561,8 @@ static int dma_buf_read(pc300_t * card, int ch, struct sk_buff *skb) static void tx_dma_stop(pc300_t * card, int ch) { void __iomem *scabase = card->hw.scabase; - ucchar drr_ena_bit = 1 << (5 + 2 * ch); - ucchar drr_rst_bit = 1 << (1 + 2 * ch); + u8 drr_ena_bit = 1 << (5 + 2 * ch); + u8 drr_rst_bit = 1 << (1 + 2 * ch); /* Disable DMA */ cpc_writeb(scabase + DRR, drr_ena_bit); @@ -572,8 +572,8 @@ static void tx_dma_stop(pc300_t * card, int ch) static void rx_dma_stop(pc300_t * card, int ch) { void __iomem *scabase = card->hw.scabase; - ucchar drr_ena_bit = 1 << (4 + 2 * ch); - ucchar drr_rst_bit = 1 << (2 * ch); + u8 drr_ena_bit = 1 << (4 + 2 * ch); + u8 drr_rst_bit = 1 << (2 * ch); /* Disable DMA */ cpc_writeb(scabase + DRR, drr_ena_bit); @@ -605,7 +605,7 @@ static void rx_dma_start(pc300_t * card, int ch) /*************************/ /*** FALC Routines ***/ /*************************/ -static void falc_issue_cmd(pc300_t * card, int ch, ucchar cmd) +static void falc_issue_cmd(pc300_t *card, int ch, u8 cmd) { void __iomem *falcbase = card->hw.falcbase; unsigned long i = 0; @@ -673,7 +673,7 @@ static void falc_intr_enable(pc300_t * card, int ch) static void falc_open_timeslot(pc300_t * card, int ch, int timeslot) { void __iomem *falcbase = card->hw.falcbase; - ucchar tshf = card->chan[ch].falc.offset; + u8 tshf = card->chan[ch].falc.offset; cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch), cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) & @@ -689,7 +689,7 @@ static void falc_open_timeslot(pc300_t * card, int ch, int timeslot) static void falc_close_timeslot(pc300_t * card, int ch, int timeslot) { void __iomem *falcbase = card->hw.falcbase; - ucchar tshf = card->chan[ch].falc.offset; + u8 tshf = card->chan[ch].falc.offset; cpc_writeb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch), cpc_readb(falcbase + F_REG((ICB1 + (timeslot - tshf) / 8), ch)) | @@ -810,7 +810,7 @@ static void falc_init_t1(pc300_t * card, int ch) pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; falc_t *pfalc = (falc_t *) & chan->falc; void __iomem *falcbase = card->hw.falcbase; - ucchar dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0); + u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0); /* Switch to T1 mode (PCM 24) */ cpc_writeb(falcbase + F_REG(FMR1, ch), FMR1_PMOD); @@ -979,7 +979,7 @@ static void falc_init_e1(pc300_t * card, int ch) pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; falc_t *pfalc = (falc_t *) & chan->falc; void __iomem *falcbase = card->hw.falcbase; - ucchar dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0); + u8 dja = (ch ? (LIM2_DJA2 | LIM2_DJA1) : 0); /* Switch to E1 mode (PCM 30) */ cpc_writeb(falcbase + F_REG(FMR1, ch), @@ -1185,7 +1185,7 @@ static void te_config(pc300_t * card, int ch) pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; falc_t *pfalc = (falc_t *) & chan->falc; void __iomem *falcbase = card->hw.falcbase; - ucchar dummy; + u8 dummy; unsigned long flags; memset(pfalc, 0, sizeof(falc_t)); @@ -1401,7 +1401,7 @@ static void falc_update_stats(pc300_t * card, int ch) pc300chconf_t *conf = (pc300chconf_t *) & chan->conf; falc_t *pfalc = (falc_t *) & chan->falc; void __iomem *falcbase = card->hw.falcbase; - ucshort counter; + u16 counter; counter = cpc_readb(falcbase + F_REG(FECL, ch)); counter |= cpc_readb(falcbase + F_REG(FECH, ch)) << 8; @@ -1727,7 +1727,7 @@ static void falc_pattern_test(pc300_t * card, int ch, unsigned int activate) * Description: This routine returns the bit error counter value *---------------------------------------------------------------------------- */ -static ucshort falc_pattern_test_error(pc300_t * card, int ch) +static u16 falc_pattern_test_error(pc300_t * card, int ch) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -1774,7 +1774,7 @@ static void cpc_tx_timeout(struct net_device *dev) pc300_t *card = (pc300_t *) chan->card; int ch = chan->channel; unsigned long flags; - ucchar ilar; + u8 ilar; dev->stats.tx_errors++; dev->stats.tx_aborted_errors++; @@ -1830,7 +1830,7 @@ static int cpc_queue_xmit(struct sk_buff *skb, struct net_device *dev) } /* Write buffer to DMA buffers */ - if (dma_buf_write(card, ch, (ucchar *) skb->data, skb->len) != 0) { + if (dma_buf_write(card, ch, (u8 *)skb->data, skb->len) != 0) { // printk("%s: write error. Dropping TX packet.\n", dev->name); netif_stop_queue(dev); dev_kfree_skb(skb); @@ -1995,7 +1995,7 @@ static void sca_tx_intr(pc300dev_t *dev) static void sca_intr(pc300_t * card) { void __iomem *scabase = card->hw.scabase; - volatile uclong status; + volatile u32 status; int ch; int intr_count = 0; unsigned char dsr_rx; @@ -2010,7 +2010,7 @@ static void sca_intr(pc300_t * card) /**** Reception ****/ if (status & IR0_DRX((IR0_DMIA | IR0_DMIB), ch)) { - ucchar drx_stat = cpc_readb(scabase + DSR_RX(ch)); + u8 drx_stat = cpc_readb(scabase + DSR_RX(ch)); /* Clear RX interrupts */ cpc_writeb(scabase + DSR_RX(ch), drx_stat | DSR_DWE); @@ -2084,7 +2084,7 @@ static void sca_intr(pc300_t * card) /**** Transmission ****/ if (status & IR0_DTX((IR0_EFT | IR0_DMIA | IR0_DMIB), ch)) { - ucchar dtx_stat = cpc_readb(scabase + DSR_TX(ch)); + u8 dtx_stat = cpc_readb(scabase + DSR_TX(ch)); /* Clear TX interrupts */ cpc_writeb(scabase + DSR_TX(ch), dtx_stat | DSR_DWE); @@ -2128,7 +2128,7 @@ static void sca_intr(pc300_t * card) /**** MSCI ****/ if (status & IR0_M(IR0_RXINTA, ch)) { - ucchar st1 = cpc_readb(scabase + M_REG(ST1, ch)); + u8 st1 = cpc_readb(scabase + M_REG(ST1, ch)); /* Clear MSCI interrupts */ cpc_writeb(scabase + M_REG(ST1, ch), st1); @@ -2170,7 +2170,7 @@ static void sca_intr(pc300_t * card) } } -static void falc_t1_loop_detection(pc300_t * card, int ch, ucchar frs1) +static void falc_t1_loop_detection(pc300_t *card, int ch, u8 frs1) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -2195,7 +2195,7 @@ static void falc_t1_loop_detection(pc300_t * card, int ch, ucchar frs1) } } -static void falc_e1_loop_detection(pc300_t * card, int ch, ucchar rsp) +static void falc_e1_loop_detection(pc300_t *card, int ch, u8 rsp) { pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; @@ -2225,8 +2225,8 @@ static void falc_t1_intr(pc300_t * card, int ch) pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; void __iomem *falcbase = card->hw.falcbase; - ucchar isr0, isr3, gis; - ucchar dummy; + u8 isr0, isr3, gis; + u8 dummy; while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) { if (gis & GIS_ISR0) { @@ -2272,8 +2272,8 @@ static void falc_e1_intr(pc300_t * card, int ch) pc300ch_t *chan = (pc300ch_t *) & card->chan[ch]; falc_t *pfalc = (falc_t *) & chan->falc; void __iomem *falcbase = card->hw.falcbase; - ucchar isr1, isr2, isr3, gis, rsp; - ucchar dummy; + u8 isr1, isr2, isr3, gis, rsp; + u8 dummy; while ((gis = cpc_readb(falcbase + F_REG(GIS, ch))) != 0) { rsp = cpc_readb(falcbase + F_REG(RSP, ch)); @@ -2355,7 +2355,7 @@ static void falc_intr(pc300_t * card) static irqreturn_t cpc_intr(int irq, void *dev_id) { pc300_t *card = dev_id; - volatile ucchar plx_status; + volatile u8 plx_status; if (!card) { #ifdef PC300_DEBUG_INTR @@ -2394,7 +2394,7 @@ static irqreturn_t cpc_intr(int irq, void *dev_id) static void cpc_sca_status(pc300_t * card, int ch) { - ucchar ilar; + u8 ilar; void __iomem *scabase = card->hw.scabase; unsigned long flags; @@ -2812,7 +2812,7 @@ static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) } } -static int clock_rate_calc(uclong rate, uclong clock, int *br_io) +static int clock_rate_calc(u32 rate, u32 clock, int *br_io) { int br, tc; int br_pwr, error; @@ -2849,12 +2849,12 @@ static int ch_config(pc300dev_t * d) void __iomem *scabase = card->hw.scabase; void __iomem *plxbase = card->hw.plxbase; int ch = chan->channel; - uclong clkrate = chan->conf.phys_settings.clock_rate; - uclong clktype = chan->conf.phys_settings.clock_type; - ucshort encoding = chan->conf.proto_settings.encoding; - ucshort parity = chan->conf.proto_settings.parity; - ucchar md0, md2; - + u32 clkrate = chan->conf.phys_settings.clock_rate; + u32 clktype = chan->conf.phys_settings.clock_type; + u16 encoding = chan->conf.proto_settings.encoding; + u16 parity = chan->conf.proto_settings.parity; + u8 md0, md2; + /* Reset the channel */ cpc_writeb(scabase + M_REG(CMD, ch), CMD_CH_RST); @@ -3193,16 +3193,16 @@ static int cpc_close(struct net_device *dev) return 0; } -static uclong detect_ram(pc300_t * card) +static u32 detect_ram(pc300_t * card) { - uclong i; - ucchar data; + u32 i; + u8 data; void __iomem *rambase = card->hw.rambase; card->hw.ramsize = PC300_RAMSIZE; /* Let's find out how much RAM is present on this board */ for (i = 0; i < card->hw.ramsize; i++) { - data = (ucchar) (i & 0xff); + data = (u8)(i & 0xff); cpc_writeb(rambase + i, data); if (cpc_readb(rambase + i) != data) { break; @@ -3279,7 +3279,7 @@ static void cpc_init_card(pc300_t * card) cpc_writeb(card->hw.scabase + DMER, 0x80); if (card->hw.type == PC300_TE) { - ucchar reg1; + u8 reg1; /* Check CPLD version */ reg1 = cpc_readb(card->hw.falcbase + CPLD_REG1); @@ -3413,7 +3413,7 @@ cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int first_time = 1; int err, eeprom_outdated = 0; - ucshort device_id; + u16 device_id; pc300_t *card; if (first_time) { -- GitLab From 0bee8db8f63b099412fdbce5b55b01d9f177951d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 1 Jul 2008 22:04:01 +0200 Subject: [PATCH 0092/1024] WAN: farsync driver no longer uses syncppp.c directly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/Makefile | 2 +- drivers/net/wan/farsync.c | 5 +---- drivers/net/wan/farsync.h | 6 ------ 3 files changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index d61fef36afc..94c1d474e30 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -24,7 +24,7 @@ pc300-objs := $(pc300-y) obj-$(CONFIG_HOSTESS_SV11) += z85230.o syncppp.o hostess_sv11.o obj-$(CONFIG_SEALEVEL_4021) += z85230.o syncppp.o sealevel.o obj-$(CONFIG_COSA) += syncppp.o cosa.o -obj-$(CONFIG_FARSYNC) += syncppp.o farsync.o +obj-$(CONFIG_FARSYNC) += farsync.o obj-$(CONFIG_DSCC4) += dscc4.o obj-$(CONFIG_LANMEDIA) += syncppp.o obj-$(CONFIG_X25_ASY) += x25_asy.o diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index 754f00809e3..9557ad078ab 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -47,10 +47,7 @@ MODULE_LICENSE("GPL"); /* Default parameters for the link */ #define FST_TX_QUEUE_LEN 100 /* At 8Mbps a longer queue length is - * useful, the syncppp module forces - * this down assuming a slower line I - * guess. - */ + * useful */ #define FST_TXQ_DEPTH 16 /* This one is for the buffering * of frames on the way down to the card * so that we can keep the card busy diff --git a/drivers/net/wan/farsync.h b/drivers/net/wan/farsync.h index d871dafa87a..6b27e7c3d44 100644 --- a/drivers/net/wan/farsync.h +++ b/drivers/net/wan/farsync.h @@ -54,9 +54,6 @@ /* Ioctl call command values - * - * The first three private ioctls are used by the sync-PPP module, - * allowing a little room for expansion we start our numbering at 10. */ #define FSTWRITE (SIOCDEVPRIVATE+10) #define FSTCPURESET (SIOCDEVPRIVATE+11) @@ -202,9 +199,6 @@ struct fstioc_info { #define J1 7 /* "proto" */ -#define FST_HDLC 1 /* Cisco compatible HDLC */ -#define FST_PPP 2 /* Sync PPP */ -#define FST_MONITOR 3 /* Monitor only (raw packet reception) */ #define FST_RAW 4 /* Two way raw packets */ #define FST_GEN_HDLC 5 /* Using "Generic HDLC" module */ -- GitLab From aca257530f7d681b953961090ad729c32aa5ad62 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 1 Jul 2008 23:40:29 +0200 Subject: [PATCH 0093/1024] WAN: Port COSA driver to generic HDLC. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/Kconfig | 2 +- drivers/net/wan/Makefile | 2 +- drivers/net/wan/cosa.c | 293 +++++++++++++++++---------------------- 3 files changed, 130 insertions(+), 167 deletions(-) diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 846be60e782..e08cd4bf7f5 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -37,7 +37,7 @@ config HOSTESS_SV11 # The COSA/SRP driver has not been tested as non-modular yet. config COSA tristate "COSA/SRP sync serial boards support" - depends on ISA && m && ISA_DMA_API + depends on ISA && m && ISA_DMA_API && HDLC ---help--- Driver for COSA and SRP synchronous serial boards. diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 94c1d474e30..9d085e0f0f4 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -23,7 +23,7 @@ pc300-objs := $(pc300-y) obj-$(CONFIG_HOSTESS_SV11) += z85230.o syncppp.o hostess_sv11.o obj-$(CONFIG_SEALEVEL_4021) += z85230.o syncppp.o sealevel.o -obj-$(CONFIG_COSA) += syncppp.o cosa.o +obj-$(CONFIG_COSA) += cosa.o obj-$(CONFIG_FARSYNC) += farsync.o obj-$(CONFIG_DSCC4) += dscc4.o obj-$(CONFIG_LANMEDIA) += syncppp.o diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 5827324e9d9..e38b7acc52d 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -2,6 +2,7 @@ /* * Copyright (C) 1995-1997 Jan "Yenya" Kasprzak + * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -54,7 +55,7 @@ * * The Linux driver (unlike the present *BSD drivers :-) can work even * for the COSA and SRP in one computer and allows each channel to work - * in one of the three modes (character device, Cisco HDLC, Sync PPP). + * in one of the two modes (character or network device). * * AUTHOR * @@ -72,12 +73,6 @@ * The Comtrol Hostess SV11 driver by Alan Cox * The Sync PPP/Cisco HDLC layer (syncppp.c) ported to Linux by Alan Cox */ -/* - * 5/25/1999 : Marcelo Tosatti - * fixed a deadlock in cosa_sppp_open - */ - -/* ---------- Headers, macros, data structures ---------- */ #include #include @@ -86,6 +81,7 @@ #include #include #include +#include #include #include #include @@ -93,14 +89,12 @@ #include #include #include - -#undef COSA_SLOW_IO /* for testing purposes only */ - #include #include #include -#include +#undef COSA_SLOW_IO /* for testing purposes only */ + #include "cosa.h" /* Maximum length of the identification string. */ @@ -112,7 +106,6 @@ /* Per-channel data structure */ struct channel_data { - void *if_ptr; /* General purpose pointer (used by SPPP) */ int usage; /* Usage count; >0 for chrdev, -1 for netdev */ int num; /* Number of the channel */ struct cosa_data *cosa; /* Pointer to the per-card structure */ @@ -136,10 +129,9 @@ struct channel_data { wait_queue_head_t txwaitq, rxwaitq; int tx_status, rx_status; - /* SPPP/HDLC device parts */ - struct ppp_device pppdev; + /* generic HDLC device parts */ + struct net_device *netdev; struct sk_buff *rx_skb, *tx_skb; - struct net_device_stats stats; }; /* cosa->firmware_status bits */ @@ -281,21 +273,19 @@ static int cosa_start_tx(struct channel_data *channel, char *buf, int size); static void cosa_kick(struct cosa_data *cosa); static int cosa_dma_able(struct channel_data *chan, char *buf, int data); -/* SPPP/HDLC stuff */ -static void sppp_channel_init(struct channel_data *chan); -static void sppp_channel_delete(struct channel_data *chan); -static int cosa_sppp_open(struct net_device *d); -static int cosa_sppp_close(struct net_device *d); -static void cosa_sppp_timeout(struct net_device *d); -static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *d); -static char *sppp_setup_rx(struct channel_data *channel, int size); -static int sppp_rx_done(struct channel_data *channel); -static int sppp_tx_done(struct channel_data *channel, int size); -static int cosa_sppp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); -static struct net_device_stats *cosa_net_stats(struct net_device *dev); +/* Network device stuff */ +static int cosa_net_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity); +static int cosa_net_open(struct net_device *d); +static int cosa_net_close(struct net_device *d); +static void cosa_net_timeout(struct net_device *d); +static int cosa_net_tx(struct sk_buff *skb, struct net_device *d); +static char *cosa_net_setup_rx(struct channel_data *channel, int size); +static int cosa_net_rx_done(struct channel_data *channel); +static int cosa_net_tx_done(struct channel_data *channel, int size); +static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); /* Character device */ -static void chardev_channel_init(struct channel_data *chan); static char *chrdev_setup_rx(struct channel_data *channel, int size); static int chrdev_rx_done(struct channel_data *channel); static int chrdev_tx_done(struct channel_data *channel, int size); @@ -357,17 +347,17 @@ static void debug_status_in(struct cosa_data *cosa, int status); static void debug_status_out(struct cosa_data *cosa, int status); #endif - +static inline struct channel_data* dev_to_chan(struct net_device *dev) +{ + return (struct channel_data *)dev_to_hdlc(dev)->priv; +} + /* ---------- Initialization stuff ---------- */ static int __init cosa_init(void) { int i, err = 0; - printk(KERN_INFO "cosa v1.08 (c) 1997-2000 Jan Kasprzak \n"); -#ifdef CONFIG_SMP - printk(KERN_INFO "cosa: SMP found. Please mail any success/failure reports to the author.\n"); -#endif if (cosa_major > 0) { if (register_chrdev(cosa_major, "cosa", &cosa_fops)) { printk(KERN_WARNING "cosa: unable to get major %d\n", @@ -402,7 +392,7 @@ static int __init cosa_init(void) } err = 0; goto out; - + out_chrdev: unregister_chrdev(cosa_major, "cosa"); out: @@ -414,43 +404,29 @@ static void __exit cosa_exit(void) { struct cosa_data *cosa; int i; - printk(KERN_INFO "Unloading the cosa module\n"); - for (i=0; inchannels; i++) { + for (i = 0; i < cosa->nchannels; i++) { /* Chardev driver has no alloc'd per-channel data */ - sppp_channel_delete(cosa->chan+i); + unregister_hdlc_device(cosa->chan[i].netdev); + free_netdev(cosa->chan[i].netdev); } /* Clean up the per-card data */ kfree(cosa->chan); kfree(cosa->bouncebuf); free_irq(cosa->irq, cosa); free_dma(cosa->dma); - release_region(cosa->datareg,is_8bit(cosa)?2:4); + release_region(cosa->datareg, is_8bit(cosa) ? 2 : 4); } unregister_chrdev(cosa_major, "cosa"); } module_exit(cosa_exit); -/* - * This function should register all the net devices needed for the - * single channel. - */ -static __inline__ void channel_init(struct channel_data *chan) -{ - sprintf(chan->name, "cosa%dc%d", chan->cosa->num, chan->num); - - /* Initialize the chardev data structures */ - chardev_channel_init(chan); - - /* Register the sppp interface */ - sppp_channel_init(chan); -} - static int cosa_probe(int base, int irq, int dma) { struct cosa_data *cosa = cosa_cards+nr_cards; @@ -576,13 +552,43 @@ static int cosa_probe(int base, int irq, int dma) /* Initialize the per-channel data */ cosa->chan = kcalloc(cosa->nchannels, sizeof(struct channel_data), GFP_KERNEL); if (!cosa->chan) { - err = -ENOMEM; + err = -ENOMEM; goto err_out3; } - for (i=0; inchannels; i++) { - cosa->chan[i].cosa = cosa; - cosa->chan[i].num = i; - channel_init(cosa->chan+i); + + for (i = 0; i < cosa->nchannels; i++) { + struct channel_data *chan = &cosa->chan[i]; + + chan->cosa = cosa; + chan->num = i; + sprintf(chan->name, "cosa%dc%d", chan->cosa->num, i); + + /* Initialize the chardev data structures */ + mutex_init(&chan->rlock); + init_MUTEX(&chan->wsem); + + /* Register the network interface */ + if (!(chan->netdev = alloc_hdlcdev(chan))) { + printk(KERN_WARNING "%s: alloc_hdlcdev failed.\n", + chan->name); + goto err_hdlcdev; + } + dev_to_hdlc(chan->netdev)->attach = cosa_net_attach; + dev_to_hdlc(chan->netdev)->xmit = cosa_net_tx; + chan->netdev->open = cosa_net_open; + chan->netdev->stop = cosa_net_close; + chan->netdev->do_ioctl = cosa_net_ioctl; + chan->netdev->tx_timeout = cosa_net_timeout; + chan->netdev->watchdog_timeo = TX_TIMEOUT; + chan->netdev->base_addr = chan->cosa->datareg; + chan->netdev->irq = chan->cosa->irq; + chan->netdev->dma = chan->cosa->dma; + if (register_hdlc_device(chan->netdev)) { + printk(KERN_WARNING "%s: register_hdlc_device()" + " failed.\n", chan->netdev->name); + free_netdev(chan->netdev); + goto err_hdlcdev; + } } printk (KERN_INFO "cosa%d: %s (%s at 0x%x irq %d dma %d), %d channels\n", @@ -590,13 +596,20 @@ static int cosa_probe(int base, int irq, int dma) cosa->datareg, cosa->irq, cosa->dma, cosa->nchannels); return nr_cards++; + +err_hdlcdev: + while (i-- > 0) { + unregister_hdlc_device(cosa->chan[i].netdev); + free_netdev(cosa->chan[i].netdev); + } + kfree(cosa->chan); err_out3: kfree(cosa->bouncebuf); err_out2: free_dma(cosa->dma); err_out1: free_irq(cosa->irq, cosa); -err_out: +err_out: release_region(cosa->datareg,is_8bit(cosa)?2:4); printk(KERN_NOTICE "cosa%d: allocating resources failed\n", cosa->num); @@ -604,54 +617,19 @@ err_out: } -/*---------- SPPP/HDLC netdevice ---------- */ +/*---------- network device ---------- */ -static void cosa_setup(struct net_device *d) +static int cosa_net_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) { - d->open = cosa_sppp_open; - d->stop = cosa_sppp_close; - d->hard_start_xmit = cosa_sppp_tx; - d->do_ioctl = cosa_sppp_ioctl; - d->get_stats = cosa_net_stats; - d->tx_timeout = cosa_sppp_timeout; - d->watchdog_timeo = TX_TIMEOUT; -} - -static void sppp_channel_init(struct channel_data *chan) -{ - struct net_device *d; - chan->if_ptr = &chan->pppdev; - d = alloc_netdev(0, chan->name, cosa_setup); - if (!d) { - printk(KERN_WARNING "%s: alloc_netdev failed.\n", chan->name); - return; - } - chan->pppdev.dev = d; - d->base_addr = chan->cosa->datareg; - d->irq = chan->cosa->irq; - d->dma = chan->cosa->dma; - d->ml_priv = chan; - sppp_attach(&chan->pppdev); - if (register_netdev(d)) { - printk(KERN_WARNING "%s: register_netdev failed.\n", d->name); - sppp_detach(d); - free_netdev(d); - chan->pppdev.dev = NULL; - return; - } -} - -static void sppp_channel_delete(struct channel_data *chan) -{ - unregister_netdev(chan->pppdev.dev); - sppp_detach(chan->pppdev.dev); - free_netdev(chan->pppdev.dev); - chan->pppdev.dev = NULL; + if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT) + return 0; + return -EINVAL; } -static int cosa_sppp_open(struct net_device *d) +static int cosa_net_open(struct net_device *dev) { - struct channel_data *chan = d->ml_priv; + struct channel_data *chan = dev_to_chan(dev); int err; unsigned long flags; @@ -662,36 +640,35 @@ static int cosa_sppp_open(struct net_device *d) } spin_lock_irqsave(&chan->cosa->lock, flags); if (chan->usage != 0) { - printk(KERN_WARNING "%s: sppp_open called with usage count %d\n", - chan->name, chan->usage); + printk(KERN_WARNING "%s: cosa_net_open called with usage count" + " %d\n", chan->name, chan->usage); spin_unlock_irqrestore(&chan->cosa->lock, flags); return -EBUSY; } - chan->setup_rx = sppp_setup_rx; - chan->tx_done = sppp_tx_done; - chan->rx_done = sppp_rx_done; - chan->usage=-1; + chan->setup_rx = cosa_net_setup_rx; + chan->tx_done = cosa_net_tx_done; + chan->rx_done = cosa_net_rx_done; + chan->usage = -1; chan->cosa->usage++; spin_unlock_irqrestore(&chan->cosa->lock, flags); - err = sppp_open(d); + err = hdlc_open(dev); if (err) { spin_lock_irqsave(&chan->cosa->lock, flags); - chan->usage=0; + chan->usage = 0; chan->cosa->usage--; - spin_unlock_irqrestore(&chan->cosa->lock, flags); return err; } - netif_start_queue(d); + netif_start_queue(dev); cosa_enable_rx(chan); return 0; } -static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *dev) +static int cosa_net_tx(struct sk_buff *skb, struct net_device *dev) { - struct channel_data *chan = dev->ml_priv; + struct channel_data *chan = dev_to_chan(dev); netif_stop_queue(dev); @@ -700,16 +677,16 @@ static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *dev) return 0; } -static void cosa_sppp_timeout(struct net_device *dev) +static void cosa_net_timeout(struct net_device *dev) { - struct channel_data *chan = dev->ml_priv; + struct channel_data *chan = dev_to_chan(dev); if (test_bit(RXBIT, &chan->cosa->rxtx)) { - chan->stats.rx_errors++; - chan->stats.rx_missed_errors++; + chan->netdev->stats.rx_errors++; + chan->netdev->stats.rx_missed_errors++; } else { - chan->stats.tx_errors++; - chan->stats.tx_aborted_errors++; + chan->netdev->stats.tx_errors++; + chan->netdev->stats.tx_aborted_errors++; } cosa_kick(chan->cosa); if (chan->tx_skb) { @@ -719,13 +696,13 @@ static void cosa_sppp_timeout(struct net_device *dev) netif_wake_queue(dev); } -static int cosa_sppp_close(struct net_device *d) +static int cosa_net_close(struct net_device *dev) { - struct channel_data *chan = d->ml_priv; + struct channel_data *chan = dev_to_chan(dev); unsigned long flags; - netif_stop_queue(d); - sppp_close(d); + netif_stop_queue(dev); + hdlc_close(dev); cosa_disable_rx(chan); spin_lock_irqsave(&chan->cosa->lock, flags); if (chan->rx_skb) { @@ -736,13 +713,13 @@ static int cosa_sppp_close(struct net_device *d) kfree_skb(chan->tx_skb); chan->tx_skb = NULL; } - chan->usage=0; + chan->usage = 0; chan->cosa->usage--; spin_unlock_irqrestore(&chan->cosa->lock, flags); return 0; } -static char *sppp_setup_rx(struct channel_data *chan, int size) +static char *cosa_net_setup_rx(struct channel_data *chan, int size) { /* * We can safely fall back to non-dma-able memory, because we have @@ -754,66 +731,53 @@ static char *sppp_setup_rx(struct channel_data *chan, int size) if (chan->rx_skb == NULL) { printk(KERN_NOTICE "%s: Memory squeeze, dropping packet\n", chan->name); - chan->stats.rx_dropped++; + chan->netdev->stats.rx_dropped++; return NULL; } - chan->pppdev.dev->trans_start = jiffies; + chan->netdev->trans_start = jiffies; return skb_put(chan->rx_skb, size); } -static int sppp_rx_done(struct channel_data *chan) +static int cosa_net_rx_done(struct channel_data *chan) { if (!chan->rx_skb) { printk(KERN_WARNING "%s: rx_done with empty skb!\n", chan->name); - chan->stats.rx_errors++; - chan->stats.rx_frame_errors++; + chan->netdev->stats.rx_errors++; + chan->netdev->stats.rx_frame_errors++; return 0; } - chan->rx_skb->protocol = htons(ETH_P_WAN_PPP); - chan->rx_skb->dev = chan->pppdev.dev; + chan->rx_skb->protocol = hdlc_type_trans(chan->rx_skb, chan->netdev); + chan->rx_skb->dev = chan->netdev; skb_reset_mac_header(chan->rx_skb); - chan->stats.rx_packets++; - chan->stats.rx_bytes += chan->cosa->rxsize; + chan->netdev->stats.rx_packets++; + chan->netdev->stats.rx_bytes += chan->cosa->rxsize; netif_rx(chan->rx_skb); chan->rx_skb = NULL; - chan->pppdev.dev->last_rx = jiffies; + chan->netdev->last_rx = jiffies; return 0; } /* ARGSUSED */ -static int sppp_tx_done(struct channel_data *chan, int size) +static int cosa_net_tx_done(struct channel_data *chan, int size) { if (!chan->tx_skb) { printk(KERN_WARNING "%s: tx_done with empty skb!\n", chan->name); - chan->stats.tx_errors++; - chan->stats.tx_aborted_errors++; + chan->netdev->stats.tx_errors++; + chan->netdev->stats.tx_aborted_errors++; return 1; } dev_kfree_skb_irq(chan->tx_skb); chan->tx_skb = NULL; - chan->stats.tx_packets++; - chan->stats.tx_bytes += size; - netif_wake_queue(chan->pppdev.dev); + chan->netdev->stats.tx_packets++; + chan->netdev->stats.tx_bytes += size; + netif_wake_queue(chan->netdev); return 1; } -static struct net_device_stats *cosa_net_stats(struct net_device *dev) -{ - struct channel_data *chan = dev->ml_priv; - return &chan->stats; -} - - /*---------- Character device ---------- */ -static void chardev_channel_init(struct channel_data *chan) -{ - mutex_init(&chan->rlock); - init_MUTEX(&chan->wsem); -} - static ssize_t cosa_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { @@ -1223,16 +1187,15 @@ static int cosa_ioctl_common(struct cosa_data *cosa, return -ENOIOCTLCMD; } -static int cosa_sppp_ioctl(struct net_device *dev, struct ifreq *ifr, - int cmd) +static int cosa_net_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { int rv; - struct channel_data *chan = dev->ml_priv; - rv = cosa_ioctl_common(chan->cosa, chan, cmd, (unsigned long)ifr->ifr_data); - if (rv == -ENOIOCTLCMD) { - return sppp_do_ioctl(dev, ifr, cmd); - } - return rv; + struct channel_data *chan = dev_to_chan(dev); + rv = cosa_ioctl_common(chan->cosa, chan, cmd, + (unsigned long)ifr->ifr_data); + if (rv != -ENOIOCTLCMD) + return rv; + return hdlc_ioctl(dev, ifr, cmd); } static int cosa_chardev_ioctl(struct inode *inode, struct file *file, -- GitLab From 52e8a6a2d8dc19002d1757870d16051157ce999c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Wed, 2 Jul 2008 17:47:52 +0200 Subject: [PATCH 0094/1024] WAN: Convert Zilog-based drivers to generic HDLC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/Kconfig | 4 +- drivers/net/wan/Makefile | 6 +- drivers/net/wan/hostess_sv11.c | 382 +++++++++++++-------------------- drivers/net/wan/sealevel.c | 361 ++++++++++++------------------- drivers/net/wan/z85230.c | 193 +++++++---------- drivers/net/wan/z85230.h | 10 +- 6 files changed, 382 insertions(+), 574 deletions(-) diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index e08cd4bf7f5..04c714aa7a6 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -25,7 +25,7 @@ if WAN # There is no way to detect a comtrol sv11 - force it modular for now. config HOSTESS_SV11 tristate "Comtrol Hostess SV-11 support" - depends on ISA && m && ISA_DMA_API && INET + depends on ISA && m && ISA_DMA_API && INET && HDLC help Driver for Comtrol Hostess SV-11 network card which operates on low speed synchronous serial links at up to @@ -88,7 +88,7 @@ config LANMEDIA # There is no way to detect a Sealevel board. Force it modular config SEALEVEL_4021 tristate "Sealevel Systems 4021 support" - depends on ISA && m && ISA_DMA_API && INET + depends on ISA && m && ISA_DMA_API && INET && HDLC help This is a driver for the Sealevel Systems ACB 56 serial I/O adapter. diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 9d085e0f0f4..5d27a17792c 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -21,11 +21,11 @@ pc300-y := pc300_drv.o pc300-$(CONFIG_PC300_MLPPP) += pc300_tty.o pc300-objs := $(pc300-y) -obj-$(CONFIG_HOSTESS_SV11) += z85230.o syncppp.o hostess_sv11.o -obj-$(CONFIG_SEALEVEL_4021) += z85230.o syncppp.o sealevel.o +obj-$(CONFIG_HOSTESS_SV11) += z85230.o hostess_sv11.o +obj-$(CONFIG_SEALEVEL_4021) += z85230.o sealevel.o obj-$(CONFIG_COSA) += cosa.o obj-$(CONFIG_FARSYNC) += farsync.o -obj-$(CONFIG_DSCC4) += dscc4.o +obj-$(CONFIG_DSCC4) += dscc4.o obj-$(CONFIG_LANMEDIA) += syncppp.o obj-$(CONFIG_X25_ASY) += x25_asy.o diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c index f3065d3473f..e299313f828 100644 --- a/drivers/net/wan/hostess_sv11.c +++ b/drivers/net/wan/hostess_sv11.c @@ -16,6 +16,8 @@ * touching control registers. * * Port B isnt wired (why - beats me) + * + * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa */ #include @@ -26,6 +28,7 @@ #include #include #include +#include #include #include @@ -33,34 +36,31 @@ #include #include #include -#include #include "z85230.h" static int dma; -struct sv11_device -{ - void *if_ptr; /* General purpose pointer (used by SPPP) */ - struct z8530_dev sync; - struct ppp_device netdev; -}; - /* * Network driver support routines */ +static inline struct z8530_dev* dev_to_sv(struct net_device *dev) +{ + return (struct z8530_dev *)dev_to_hdlc(dev)->priv; +} + /* - * Frame receive. Simple for our card as we do sync ppp and there + * Frame receive. Simple for our card as we do HDLC and there * is no funny garbage involved */ - + static void hostess_input(struct z8530_channel *c, struct sk_buff *skb) { /* Drop the CRC - it's not a good idea to try and negotiate it ;) */ - skb_trim(skb, skb->len-2); - skb->protocol=__constant_htons(ETH_P_WAN_PPP); + skb_trim(skb, skb->len - 2); + skb->protocol = hdlc_type_trans(skb, c->netdevice); skb_reset_mac_header(skb); - skb->dev=c->netdevice; + skb->dev = c->netdevice; /* * Send it to the PPP layer. We don't have time to process * it right now. @@ -68,56 +68,51 @@ static void hostess_input(struct z8530_channel *c, struct sk_buff *skb) netif_rx(skb); c->netdevice->last_rx = jiffies; } - + /* * We've been placed in the UP state - */ - + */ + static int hostess_open(struct net_device *d) { - struct sv11_device *sv11=d->ml_priv; + struct z8530_dev *sv11 = dev_to_sv(d); int err = -1; - + /* * Link layer up */ - switch(dma) - { + switch (dma) { case 0: - err=z8530_sync_open(d, &sv11->sync.chanA); + err = z8530_sync_open(d, &sv11->chanA); break; case 1: - err=z8530_sync_dma_open(d, &sv11->sync.chanA); + err = z8530_sync_dma_open(d, &sv11->chanA); break; case 2: - err=z8530_sync_txdma_open(d, &sv11->sync.chanA); + err = z8530_sync_txdma_open(d, &sv11->chanA); break; } - - if(err) + + if (err) return err; - /* - * Begin PPP - */ - err=sppp_open(d); - if(err) - { - switch(dma) - { + + err = hdlc_open(d); + if (err) { + switch (dma) { case 0: - z8530_sync_close(d, &sv11->sync.chanA); + z8530_sync_close(d, &sv11->chanA); break; case 1: - z8530_sync_dma_close(d, &sv11->sync.chanA); + z8530_sync_dma_close(d, &sv11->chanA); break; case 2: - z8530_sync_txdma_close(d, &sv11->sync.chanA); + z8530_sync_txdma_close(d, &sv11->chanA); break; - } + } return err; } - sv11->sync.chanA.rx_function=hostess_input; - + sv11->chanA.rx_function = hostess_input; + /* * Go go go */ @@ -128,30 +123,24 @@ static int hostess_open(struct net_device *d) static int hostess_close(struct net_device *d) { - struct sv11_device *sv11=d->ml_priv; + struct z8530_dev *sv11 = dev_to_sv(d); /* * Discard new frames */ - sv11->sync.chanA.rx_function=z8530_null_rx; - /* - * PPP off - */ - sppp_close(d); - /* - * Link layer down - */ + sv11->chanA.rx_function = z8530_null_rx; + + hdlc_close(d); netif_stop_queue(d); - - switch(dma) - { + + switch (dma) { case 0: - z8530_sync_close(d, &sv11->sync.chanA); + z8530_sync_close(d, &sv11->chanA); break; case 1: - z8530_sync_dma_close(d, &sv11->sync.chanA); + z8530_sync_dma_close(d, &sv11->chanA); break; case 2: - z8530_sync_txdma_close(d, &sv11->sync.chanA); + z8530_sync_txdma_close(d, &sv11->chanA); break; } return 0; @@ -159,232 +148,174 @@ static int hostess_close(struct net_device *d) static int hostess_ioctl(struct net_device *d, struct ifreq *ifr, int cmd) { - /* struct sv11_device *sv11=d->ml_priv; - z8530_ioctl(d,&sv11->sync.chanA,ifr,cmd) */ - return sppp_do_ioctl(d, ifr,cmd); -} - -static struct net_device_stats *hostess_get_stats(struct net_device *d) -{ - struct sv11_device *sv11=d->ml_priv; - if(sv11) - return z8530_get_stats(&sv11->sync.chanA); - else - return NULL; + /* struct z8530_dev *sv11=dev_to_sv(d); + z8530_ioctl(d,&sv11->chanA,ifr,cmd) */ + return hdlc_ioctl(d, ifr, cmd); } /* - * Passed PPP frames, fire them downwind. + * Passed network frames, fire them downwind. */ - + static int hostess_queue_xmit(struct sk_buff *skb, struct net_device *d) { - struct sv11_device *sv11=d->ml_priv; - return z8530_queue_xmit(&sv11->sync.chanA, skb); + return z8530_queue_xmit(&dev_to_sv(d)->chanA, skb); } -static int hostess_neigh_setup(struct neighbour *n) +static int hostess_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) { - if (n->nud_state == NUD_NONE) { - n->ops = &arp_broken_ops; - n->output = n->ops->output; - } - return 0; -} - -static int hostess_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p) -{ - if (p->tbl->family == AF_INET) { - p->neigh_setup = hostess_neigh_setup; - p->ucast_probes = 0; - p->mcast_probes = 0; - } - return 0; -} - -static void sv11_setup(struct net_device *dev) -{ - dev->open = hostess_open; - dev->stop = hostess_close; - dev->hard_start_xmit = hostess_queue_xmit; - dev->get_stats = hostess_get_stats; - dev->do_ioctl = hostess_ioctl; - dev->neigh_setup = hostess_neigh_setup_dev; + if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT) + return 0; + return -EINVAL; } /* * Description block for a Comtrol Hostess SV11 card */ - -static struct sv11_device *sv11_init(int iobase, int irq) + +static struct z8530_dev *sv11_init(int iobase, int irq) { - struct z8530_dev *dev; - struct sv11_device *sv; - + struct z8530_dev *sv; + struct net_device *netdev; /* * Get the needed I/O space */ - - if(!request_region(iobase, 8, "Comtrol SV11")) - { - printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n", iobase); + + if (!request_region(iobase, 8, "Comtrol SV11")) { + printk(KERN_WARNING "hostess: I/O 0x%X already in use.\n", + iobase); return NULL; } - - sv = kzalloc(sizeof(struct sv11_device), GFP_KERNEL); - if(!sv) - goto fail3; - - sv->if_ptr=&sv->netdev; - - sv->netdev.dev = alloc_netdev(0, "hdlc%d", sv11_setup); - if(!sv->netdev.dev) - goto fail2; - - dev=&sv->sync; - + + sv = kzalloc(sizeof(struct z8530_dev), GFP_KERNEL); + if (!sv) + goto err_kzalloc; + /* * Stuff in the I/O addressing */ - - dev->active = 0; - - dev->chanA.ctrlio=iobase+1; - dev->chanA.dataio=iobase+3; - dev->chanB.ctrlio=-1; - dev->chanB.dataio=-1; - dev->chanA.irqs=&z8530_nop; - dev->chanB.irqs=&z8530_nop; - - outb(0, iobase+4); /* DMA off */ - + + sv->active = 0; + + sv->chanA.ctrlio = iobase + 1; + sv->chanA.dataio = iobase + 3; + sv->chanB.ctrlio = -1; + sv->chanB.dataio = -1; + sv->chanA.irqs = &z8530_nop; + sv->chanB.irqs = &z8530_nop; + + outb(0, iobase + 4); /* DMA off */ + /* We want a fast IRQ for this device. Actually we'd like an even faster IRQ ;) - This is one driver RtLinux is made for */ - - if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "Hostess SV11", dev)<0) - { + + if (request_irq(irq, &z8530_interrupt, IRQF_DISABLED, + "Hostess SV11", sv) < 0) { printk(KERN_WARNING "hostess: IRQ %d already in use.\n", irq); - goto fail1; + goto err_irq; } - - dev->irq=irq; - dev->chanA.private=sv; - dev->chanA.netdevice=sv->netdev.dev; - dev->chanA.dev=dev; - dev->chanB.dev=dev; - - if(dma) - { + + sv->irq = irq; + sv->chanA.private = sv; + sv->chanA.dev = sv; + sv->chanB.dev = sv; + + if (dma) { /* * You can have DMA off or 1 and 3 thats the lot * on the Comtrol. */ - dev->chanA.txdma=3; - dev->chanA.rxdma=1; - outb(0x03|0x08, iobase+4); /* DMA on */ - if(request_dma(dev->chanA.txdma, "Hostess SV/11 (TX)")!=0) - goto fail; - - if(dma==1) - { - if(request_dma(dev->chanA.rxdma, "Hostess SV/11 (RX)")!=0) - goto dmafail; - } + sv->chanA.txdma = 3; + sv->chanA.rxdma = 1; + outb(0x03 | 0x08, iobase + 4); /* DMA on */ + if (request_dma(sv->chanA.txdma, "Hostess SV/11 (TX)")) + goto err_txdma; + + if (dma == 1) + if (request_dma(sv->chanA.rxdma, "Hostess SV/11 (RX)")) + goto err_rxdma; } /* Kill our private IRQ line the hostess can end up chattering until the configuration is set */ disable_irq(irq); - + /* * Begin normal initialise */ - - if(z8530_init(dev)!=0) - { + + if (z8530_init(sv)) { printk(KERN_ERR "Z8530 series device not found.\n"); enable_irq(irq); - goto dmafail2; + goto free_dma; } - z8530_channel_load(&dev->chanB, z8530_dead_port); - if(dev->type==Z85C30) - z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream); + z8530_channel_load(&sv->chanB, z8530_dead_port); + if (sv->type == Z85C30) + z8530_channel_load(&sv->chanA, z8530_hdlc_kilostream); else - z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230); - + z8530_channel_load(&sv->chanA, z8530_hdlc_kilostream_85230); + enable_irq(irq); - /* * Now we can take the IRQ */ - if(dev_alloc_name(dev->chanA.netdevice,"hdlc%d")>=0) - { - struct net_device *d=dev->chanA.netdevice; - /* - * Initialise the PPP components - */ - d->ml_priv = sv; - sppp_attach(&sv->netdev); - - /* - * Local fields - */ - - d->base_addr = iobase; - d->irq = irq; - - if(register_netdev(d)) - { - printk(KERN_ERR "%s: unable to register device.\n", - d->name); - sppp_detach(d); - goto dmafail2; - } + sv->chanA.netdevice = netdev = alloc_hdlcdev(sv); + if (!netdev) + goto free_dma; - z8530_describe(dev, "I/O", iobase); - dev->active=1; - return sv; + dev_to_hdlc(netdev)->attach = hostess_attach; + dev_to_hdlc(netdev)->xmit = hostess_queue_xmit; + netdev->open = hostess_open; + netdev->stop = hostess_close; + netdev->do_ioctl = hostess_ioctl; + netdev->base_addr = iobase; + netdev->irq = irq; + + if (register_hdlc_device(netdev)) { + printk(KERN_ERR "hostess: unable to register HDLC device.\n"); + free_netdev(netdev); + goto free_dma; } -dmafail2: - if(dma==1) - free_dma(dev->chanA.rxdma); -dmafail: - if(dma) - free_dma(dev->chanA.txdma); -fail: - free_irq(irq, dev); -fail1: - free_netdev(sv->netdev.dev); -fail2: + + z8530_describe(sv, "I/O", iobase); + sv->active = 1; + return sv; + +free_dma: + if (dma == 1) + free_dma(sv->chanA.rxdma); +err_rxdma: + if (dma) + free_dma(sv->chanA.txdma); +err_txdma: + free_irq(irq, sv); +err_irq: kfree(sv); -fail3: - release_region(iobase,8); +err_kzalloc: + release_region(iobase, 8); return NULL; } -static void sv11_shutdown(struct sv11_device *dev) +static void sv11_shutdown(struct z8530_dev *dev) { - sppp_detach(dev->netdev.dev); - unregister_netdev(dev->netdev.dev); - z8530_shutdown(&dev->sync); - free_irq(dev->sync.irq, dev); - if(dma) - { - if(dma==1) - free_dma(dev->sync.chanA.rxdma); - free_dma(dev->sync.chanA.txdma); + unregister_hdlc_device(dev->chanA.netdevice); + z8530_shutdown(dev); + free_irq(dev->irq, dev); + if (dma) { + if (dma == 1) + free_dma(dev->chanA.rxdma); + free_dma(dev->chanA.txdma); } - release_region(dev->sync.chanA.ctrlio-1, 8); - free_netdev(dev->netdev.dev); + release_region(dev->chanA.ctrlio - 1, 8); + free_netdev(dev->chanA.netdevice); kfree(dev); } -#ifdef MODULE - -static int io=0x200; -static int irq=9; +static int io = 0x200; +static int irq = 9; module_param(io, int, 0); MODULE_PARM_DESC(io, "The I/O base of the Comtrol Hostess SV11 card"); @@ -397,22 +328,17 @@ MODULE_AUTHOR("Alan Cox"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Modular driver for the Comtrol Hostess SV11"); -static struct sv11_device *sv11_unit; +static struct z8530_dev *sv11_unit; int init_module(void) { - printk(KERN_INFO "SV-11 Z85230 Synchronous Driver v 0.03.\n"); - printk(KERN_INFO "(c) Copyright 2001, Red Hat Inc.\n"); - if((sv11_unit=sv11_init(io,irq))==NULL) + if ((sv11_unit = sv11_init(io, irq)) == NULL) return -ENODEV; return 0; } void cleanup_module(void) { - if(sv11_unit) + if (sv11_unit) sv11_shutdown(sv11_unit); } - -#endif - diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c index 44a89df1b8b..c0235844a4d 100644 --- a/drivers/net/wan/sealevel.c +++ b/drivers/net/wan/sealevel.c @@ -8,6 +8,7 @@ * * (c) Copyright 1999, 2001 Alan Cox * (c) Copyright 2001 Red Hat Inc. + * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa * */ @@ -19,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -27,22 +29,19 @@ #include #include #include -#include #include "z85230.h" struct slvl_device { - void *if_ptr; /* General purpose pointer (used by SPPP) */ struct z8530_channel *chan; - struct ppp_device pppdev; int channel; }; struct slvl_board { - struct slvl_device *dev[2]; + struct slvl_device dev[2]; struct z8530_dev board; int iobase; }; @@ -51,72 +50,69 @@ struct slvl_board * Network driver support routines */ +static inline struct slvl_device* dev_to_chan(struct net_device *dev) +{ + return (struct slvl_device *)dev_to_hdlc(dev)->priv; +} + /* - * Frame receive. Simple for our card as we do sync ppp and there + * Frame receive. Simple for our card as we do HDLC and there * is no funny garbage involved */ - + static void sealevel_input(struct z8530_channel *c, struct sk_buff *skb) { /* Drop the CRC - it's not a good idea to try and negotiate it ;) */ - skb_trim(skb, skb->len-2); - skb->protocol=htons(ETH_P_WAN_PPP); + skb_trim(skb, skb->len - 2); + skb->protocol = hdlc_type_trans(skb, c->netdevice); skb_reset_mac_header(skb); - skb->dev=c->netdevice; - /* - * Send it to the PPP layer. We don't have time to process - * it right now. - */ + skb->dev = c->netdevice; netif_rx(skb); c->netdevice->last_rx = jiffies; } - + /* * We've been placed in the UP state - */ - + */ + static int sealevel_open(struct net_device *d) { - struct slvl_device *slvl=d->priv; + struct slvl_device *slvl = dev_to_chan(d); int err = -1; int unit = slvl->channel; - + /* - * Link layer up. + * Link layer up. */ - switch(unit) + switch (unit) { case 0: - err=z8530_sync_dma_open(d, slvl->chan); + err = z8530_sync_dma_open(d, slvl->chan); break; case 1: - err=z8530_sync_open(d, slvl->chan); + err = z8530_sync_open(d, slvl->chan); break; } - - if(err) + + if (err) return err; - /* - * Begin PPP - */ - err=sppp_open(d); - if(err) - { - switch(unit) - { + + err = hdlc_open(d); + if (err) { + switch (unit) { case 0: z8530_sync_dma_close(d, slvl->chan); break; case 1: z8530_sync_close(d, slvl->chan); break; - } + } return err; } - - slvl->chan->rx_function=sealevel_input; - + + slvl->chan->rx_function = sealevel_input; + /* * Go go go */ @@ -126,26 +122,19 @@ static int sealevel_open(struct net_device *d) static int sealevel_close(struct net_device *d) { - struct slvl_device *slvl=d->priv; + struct slvl_device *slvl = dev_to_chan(d); int unit = slvl->channel; - + /* * Discard new frames */ - - slvl->chan->rx_function=z8530_null_rx; - - /* - * PPP off - */ - sppp_close(d); - /* - * Link layer down - */ + slvl->chan->rx_function = z8530_null_rx; + + hdlc_close(d); netif_stop_queue(d); - - switch(unit) + + switch (unit) { case 0: z8530_sync_dma_close(d, slvl->chan); @@ -159,210 +148,153 @@ static int sealevel_close(struct net_device *d) static int sealevel_ioctl(struct net_device *d, struct ifreq *ifr, int cmd) { - /* struct slvl_device *slvl=d->priv; + /* struct slvl_device *slvl=dev_to_chan(d); z8530_ioctl(d,&slvl->sync.chanA,ifr,cmd) */ - return sppp_do_ioctl(d, ifr,cmd); -} - -static struct net_device_stats *sealevel_get_stats(struct net_device *d) -{ - struct slvl_device *slvl=d->priv; - if(slvl) - return z8530_get_stats(slvl->chan); - else - return NULL; + return hdlc_ioctl(d, ifr, cmd); } /* - * Passed PPP frames, fire them downwind. + * Passed network frames, fire them downwind. */ - + static int sealevel_queue_xmit(struct sk_buff *skb, struct net_device *d) { - struct slvl_device *slvl=d->priv; - return z8530_queue_xmit(slvl->chan, skb); + return z8530_queue_xmit(dev_to_chan(d)->chan, skb); } -static int sealevel_neigh_setup(struct neighbour *n) +static int sealevel_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) { - if (n->nud_state == NUD_NONE) { - n->ops = &arp_broken_ops; - n->output = n->ops->output; - } - return 0; + if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT) + return 0; + return -EINVAL; } -static int sealevel_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p) +static int slvl_setup(struct slvl_device *sv, int iobase, int irq) { - if (p->tbl->family == AF_INET) { - p->neigh_setup = sealevel_neigh_setup; - p->ucast_probes = 0; - p->mcast_probes = 0; + struct net_device *dev = alloc_hdlcdev(sv); + if (!dev) + return -1; + + dev_to_hdlc(dev)->attach = sealevel_attach; + dev_to_hdlc(dev)->xmit = sealevel_queue_xmit; + dev->open = sealevel_open; + dev->stop = sealevel_close; + dev->do_ioctl = sealevel_ioctl; + dev->base_addr = iobase; + dev->irq = irq; + + if (register_hdlc_device(dev)) { + printk(KERN_ERR "sealevel: unable to register HDLC device\n"); + free_netdev(dev); + return -1; } - return 0; -} -static int sealevel_attach(struct net_device *dev) -{ - struct slvl_device *sv = dev->priv; - sppp_attach(&sv->pppdev); + sv->chan->netdevice = dev; return 0; } -static void sealevel_detach(struct net_device *dev) -{ - sppp_detach(dev); -} - -static void slvl_setup(struct net_device *d) -{ - d->open = sealevel_open; - d->stop = sealevel_close; - d->init = sealevel_attach; - d->uninit = sealevel_detach; - d->hard_start_xmit = sealevel_queue_xmit; - d->get_stats = sealevel_get_stats; - d->set_multicast_list = NULL; - d->do_ioctl = sealevel_ioctl; - d->neigh_setup = sealevel_neigh_setup_dev; - d->set_mac_address = NULL; - -} - -static inline struct slvl_device *slvl_alloc(int iobase, int irq) -{ - struct net_device *d; - struct slvl_device *sv; - - d = alloc_netdev(sizeof(struct slvl_device), "hdlc%d", - slvl_setup); - - if (!d) - return NULL; - - sv = d->priv; - d->ml_priv = sv; - sv->if_ptr = &sv->pppdev; - sv->pppdev.dev = d; - d->base_addr = iobase; - d->irq = irq; - - return sv; -} - /* * Allocate and setup Sealevel board. */ - -static __init struct slvl_board *slvl_init(int iobase, int irq, + +static __init struct slvl_board *slvl_init(int iobase, int irq, int txdma, int rxdma, int slow) { struct z8530_dev *dev; struct slvl_board *b; - + /* * Get the needed I/O space */ - if(!request_region(iobase, 8, "Sealevel 4021")) - { - printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n", iobase); + if (!request_region(iobase, 8, "Sealevel 4021")) { + printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n", + iobase); return NULL; } - - b = kzalloc(sizeof(struct slvl_board), GFP_KERNEL); - if(!b) - goto fail3; - if (!(b->dev[0]= slvl_alloc(iobase, irq))) - goto fail2; + b = kzalloc(sizeof(struct slvl_board), GFP_KERNEL); + if (!b) + goto err_kzalloc; - b->dev[0]->chan = &b->board.chanA; - b->dev[0]->channel = 0; - - if (!(b->dev[1] = slvl_alloc(iobase, irq))) - goto fail1_0; + b->dev[0].chan = &b->board.chanA; + b->dev[0].channel = 0; - b->dev[1]->chan = &b->board.chanB; - b->dev[1]->channel = 1; + b->dev[1].chan = &b->board.chanB; + b->dev[1].channel = 1; dev = &b->board; - + /* * Stuff in the I/O addressing */ - + dev->active = 0; b->iobase = iobase; - + /* * Select 8530 delays for the old board */ - - if(slow) + + if (slow) iobase |= Z8530_PORT_SLEEP; - - dev->chanA.ctrlio=iobase+1; - dev->chanA.dataio=iobase; - dev->chanB.ctrlio=iobase+3; - dev->chanB.dataio=iobase+2; - - dev->chanA.irqs=&z8530_nop; - dev->chanB.irqs=&z8530_nop; - + + dev->chanA.ctrlio = iobase + 1; + dev->chanA.dataio = iobase; + dev->chanB.ctrlio = iobase + 3; + dev->chanB.dataio = iobase + 2; + + dev->chanA.irqs = &z8530_nop; + dev->chanB.irqs = &z8530_nop; + /* * Assert DTR enable DMA */ - - outb(3|(1<<7), b->iobase+4); - + + outb(3 | (1 << 7), b->iobase + 4); + /* We want a fast IRQ for this device. Actually we'd like an even faster IRQ ;) - This is one driver RtLinux is made for */ - - if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "SeaLevel", dev)<0) - { + + if (request_irq(irq, &z8530_interrupt, IRQF_DISABLED, + "SeaLevel", dev) < 0) { printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq); - goto fail1_1; + goto err_request_irq; } - - dev->irq=irq; - dev->chanA.private=&b->dev[0]; - dev->chanB.private=&b->dev[1]; - dev->chanA.netdevice=b->dev[0]->pppdev.dev; - dev->chanB.netdevice=b->dev[1]->pppdev.dev; - dev->chanA.dev=dev; - dev->chanB.dev=dev; - - dev->chanA.txdma=3; - dev->chanA.rxdma=1; - if(request_dma(dev->chanA.txdma, "SeaLevel (TX)")!=0) - goto fail; - - if(request_dma(dev->chanA.rxdma, "SeaLevel (RX)")!=0) - goto dmafail; - + + dev->irq = irq; + dev->chanA.private = &b->dev[0]; + dev->chanB.private = &b->dev[1]; + dev->chanA.dev = dev; + dev->chanB.dev = dev; + + dev->chanA.txdma = 3; + dev->chanA.rxdma = 1; + if (request_dma(dev->chanA.txdma, "SeaLevel (TX)")) + goto err_dma_tx; + + if (request_dma(dev->chanA.rxdma, "SeaLevel (RX)")) + goto err_dma_rx; + disable_irq(irq); - + /* * Begin normal initialise */ - - if(z8530_init(dev)!=0) - { + + if (z8530_init(dev) != 0) { printk(KERN_ERR "Z8530 series device not found.\n"); enable_irq(irq); - goto dmafail2; + goto free_hw; } - if(dev->type==Z85C30) - { + if (dev->type == Z85C30) { z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream); z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream); - } - else - { + } else { z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230); z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream_85230); } @@ -370,36 +302,31 @@ static __init struct slvl_board *slvl_init(int iobase, int irq, /* * Now we can take the IRQ */ - + enable_irq(irq); - if (register_netdev(b->dev[0]->pppdev.dev)) - goto dmafail2; - - if (register_netdev(b->dev[1]->pppdev.dev)) - goto fail_unit; + if (slvl_setup(&b->dev[0], iobase, irq)) + goto free_hw; + if (slvl_setup(&b->dev[1], iobase, irq)) + goto free_netdev0; z8530_describe(dev, "I/O", iobase); - dev->active=1; + dev->active = 1; return b; -fail_unit: - unregister_netdev(b->dev[0]->pppdev.dev); - -dmafail2: +free_netdev0: + unregister_hdlc_device(b->dev[0].chan->netdevice); + free_netdev(b->dev[0].chan->netdevice); +free_hw: free_dma(dev->chanA.rxdma); -dmafail: +err_dma_rx: free_dma(dev->chanA.txdma); -fail: +err_dma_tx: free_irq(irq, dev); -fail1_1: - free_netdev(b->dev[1]->pppdev.dev); -fail1_0: - free_netdev(b->dev[0]->pppdev.dev); -fail2: +err_request_irq: kfree(b); -fail3: - release_region(iobase,8); +err_kzalloc: + release_region(iobase, 8); return NULL; } @@ -408,14 +335,14 @@ static void __exit slvl_shutdown(struct slvl_board *b) int u; z8530_shutdown(&b->board); - - for(u=0; u<2; u++) + + for (u = 0; u < 2; u++) { - struct net_device *d = b->dev[u]->pppdev.dev; - unregister_netdev(d); + struct net_device *d = b->dev[u].chan->netdevice; + unregister_hdlc_device(d); free_netdev(d); } - + free_irq(b->board.irq, &b->board); free_dma(b->board.chanA.rxdma); free_dma(b->board.chanA.txdma); @@ -451,10 +378,6 @@ static struct slvl_board *slvl_unit; static int __init slvl_init_module(void) { -#ifdef MODULE - printk(KERN_INFO "SeaLevel Z85230 Synchronous Driver v 0.02.\n"); - printk(KERN_INFO "(c) Copyright 1998, Building Number Three Ltd.\n"); -#endif slvl_unit = slvl_init(io, irq, txdma, rxdma, slow); return slvl_unit ? 0 : -ENODEV; diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c index 98ef400908b..243bd8d918f 100644 --- a/drivers/net/wan/z85230.c +++ b/drivers/net/wan/z85230.c @@ -43,6 +43,7 @@ #include #include #include +#include #include #include #include @@ -51,7 +52,6 @@ #define RT_UNLOCK #include -#include #include "z85230.h" @@ -440,51 +440,46 @@ static void z8530_tx(struct z8530_channel *c) * A status event occurred in PIO synchronous mode. There are several * reasons the chip will bother us here. A transmit underrun means we * failed to feed the chip fast enough and just broke a packet. A DCD - * change is a line up or down. We communicate that back to the protocol - * layer for synchronous PPP to renegotiate. + * change is a line up or down. */ static void z8530_status(struct z8530_channel *chan) { u8 status, altered; - status=read_zsreg(chan, R0); - altered=chan->status^status; - - chan->status=status; - - if(status&TxEOM) - { + status = read_zsreg(chan, R0); + altered = chan->status ^ status; + + chan->status = status; + + if (status & TxEOM) { /* printk("%s: Tx underrun.\n", chan->dev->name); */ - chan->stats.tx_fifo_errors++; + chan->netdevice->stats.tx_fifo_errors++; write_zsctrl(chan, ERR_RES); z8530_tx_done(chan); } - - if(altered&chan->dcdcheck) + + if (altered & chan->dcdcheck) { - if(status&chan->dcdcheck) - { + if (status & chan->dcdcheck) { printk(KERN_INFO "%s: DCD raised\n", chan->dev->name); - write_zsreg(chan, R3, chan->regs[3]|RxENABLE); - if(chan->netdevice && - ((chan->netdevice->type == ARPHRD_HDLC) || - (chan->netdevice->type == ARPHRD_PPP))) - sppp_reopen(chan->netdevice); - } - else - { + write_zsreg(chan, R3, chan->regs[3] | RxENABLE); + if (chan->netdevice) + netif_carrier_on(chan->netdevice); + } else { printk(KERN_INFO "%s: DCD lost\n", chan->dev->name); - write_zsreg(chan, R3, chan->regs[3]&~RxENABLE); + write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE); z8530_flush_fifo(chan); + if (chan->netdevice) + netif_carrier_off(chan->netdevice); } - - } + + } write_zsctrl(chan, RES_EXT_INT); write_zsctrl(chan, RES_H_IUS); } -struct z8530_irqhandler z8530_sync= +struct z8530_irqhandler z8530_sync = { z8530_rx, z8530_tx, @@ -556,8 +551,7 @@ static void z8530_dma_tx(struct z8530_channel *chan) * * A status event occurred on the Z8530. We receive these for two reasons * when in DMA mode. Firstly if we finished a packet transfer we get one - * and kick the next packet out. Secondly we may see a DCD change and - * have to poke the protocol layer. + * and kick the next packet out. Secondly we may see a DCD change. * */ @@ -586,24 +580,21 @@ static void z8530_dma_status(struct z8530_channel *chan) } } - if(altered&chan->dcdcheck) + if (altered & chan->dcdcheck) { - if(status&chan->dcdcheck) - { + if (status & chan->dcdcheck) { printk(KERN_INFO "%s: DCD raised\n", chan->dev->name); - write_zsreg(chan, R3, chan->regs[3]|RxENABLE); - if(chan->netdevice && - ((chan->netdevice->type == ARPHRD_HDLC) || - (chan->netdevice->type == ARPHRD_PPP))) - sppp_reopen(chan->netdevice); - } - else - { + write_zsreg(chan, R3, chan->regs[3] | RxENABLE); + if (chan->netdevice) + netif_carrier_on(chan->netdevice); + } else { printk(KERN_INFO "%s:DCD lost\n", chan->dev->name); - write_zsreg(chan, R3, chan->regs[3]&~RxENABLE); + write_zsreg(chan, R3, chan->regs[3] & ~RxENABLE); z8530_flush_fifo(chan); + if (chan->netdevice) + netif_carrier_off(chan->netdevice); } - } + } write_zsctrl(chan, RES_EXT_INT); write_zsctrl(chan, RES_H_IUS); @@ -1459,10 +1450,10 @@ static void z8530_tx_begin(struct z8530_channel *c) /* * Check if we crapped out. */ - if(get_dma_residue(c->txdma)) + if (get_dma_residue(c->txdma)) { - c->stats.tx_dropped++; - c->stats.tx_fifo_errors++; + c->netdevice->stats.tx_dropped++; + c->netdevice->stats.tx_fifo_errors++; } release_dma_lock(flags); } @@ -1534,21 +1525,21 @@ static void z8530_tx_begin(struct z8530_channel *c) * packet. This code is fairly timing sensitive. * * Called with the register lock held. - */ - + */ + static void z8530_tx_done(struct z8530_channel *c) { struct sk_buff *skb; /* Actually this can happen.*/ - if(c->tx_skb==NULL) + if (c->tx_skb == NULL) return; - skb=c->tx_skb; - c->tx_skb=NULL; + skb = c->tx_skb; + c->tx_skb = NULL; z8530_tx_begin(c); - c->stats.tx_packets++; - c->stats.tx_bytes+=skb->len; + c->netdevice->stats.tx_packets++; + c->netdevice->stats.tx_bytes += skb->len; dev_kfree_skb_irq(skb); } @@ -1558,7 +1549,7 @@ static void z8530_tx_done(struct z8530_channel *c) * @skb: The buffer * * We point the receive handler at this function when idle. Instead - * of syncppp processing the frames we get to throw them away. + * of processing the frames we get to throw them away. */ void z8530_null_rx(struct z8530_channel *c, struct sk_buff *skb) @@ -1635,10 +1626,11 @@ static void z8530_rx_done(struct z8530_channel *c) else /* Can't occur as we dont reenable the DMA irq until after the flip is done */ - printk(KERN_WARNING "%s: DMA flip overrun!\n", c->netdevice->name); - + printk(KERN_WARNING "%s: DMA flip overrun!\n", + c->netdevice->name); + release_dma_lock(flags); - + /* * Shove the old buffer into an sk_buff. We can't DMA * directly into one on a PC - it might be above the 16Mb @@ -1646,27 +1638,23 @@ static void z8530_rx_done(struct z8530_channel *c) * can avoid the copy. Optimisation 2 - make the memcpy * a copychecksum. */ - - skb=dev_alloc_skb(ct); - if(skb==NULL) - { - c->stats.rx_dropped++; - printk(KERN_WARNING "%s: Memory squeeze.\n", c->netdevice->name); - } - else - { + + skb = dev_alloc_skb(ct); + if (skb == NULL) { + c->netdevice->stats.rx_dropped++; + printk(KERN_WARNING "%s: Memory squeeze.\n", + c->netdevice->name); + } else { skb_put(skb, ct); skb_copy_to_linear_data(skb, rxb, ct); - c->stats.rx_packets++; - c->stats.rx_bytes+=ct; + c->netdevice->stats.rx_packets++; + c->netdevice->stats.rx_bytes += ct; } - c->dma_ready=1; - } - else - { - RT_LOCK; - skb=c->skb; - + c->dma_ready = 1; + } else { + RT_LOCK; + skb = c->skb; + /* * The game we play for non DMA is similar. We want to * get the controller set up for the next packet as fast @@ -1677,48 +1665,39 @@ static void z8530_rx_done(struct z8530_channel *c) * if you build a system where the sync irq isnt blocked * by the kernel IRQ disable then you need only block the * sync IRQ for the RT_LOCK area. - * + * */ ct=c->count; - + c->skb = c->skb2; c->count = 0; c->max = c->mtu; - if(c->skb) - { + if (c->skb) { c->dptr = c->skb->data; c->max = c->mtu; - } - else - { - c->count= 0; + } else { + c->count = 0; c->max = 0; } RT_UNLOCK; c->skb2 = dev_alloc_skb(c->mtu); - if(c->skb2==NULL) + if (c->skb2 == NULL) printk(KERN_WARNING "%s: memory squeeze.\n", - c->netdevice->name); + c->netdevice->name); else - { - skb_put(c->skb2,c->mtu); - } - c->stats.rx_packets++; - c->stats.rx_bytes+=ct; - + skb_put(c->skb2, c->mtu); + c->netdevice->stats.rx_packets++; + c->netdevice->stats.rx_bytes += ct; } /* * If we received a frame we must now process it. */ - if(skb) - { + if (skb) { skb_trim(skb, ct); - c->rx_function(c,skb); - } - else - { - c->stats.rx_dropped++; + c->rx_function(c, skb); + } else { + c->netdevice->stats.rx_dropped++; printk(KERN_ERR "%s: Lost a frame\n", c->netdevice->name); } } @@ -1730,7 +1709,7 @@ static void z8530_rx_done(struct z8530_channel *c) * Returns true if the buffer cross a DMA boundary on a PC. The poor * thing can only DMA within a 64K block not across the edges of it. */ - + static inline int spans_boundary(struct sk_buff *skb) { unsigned long a=(unsigned long)skb->data; @@ -1799,24 +1778,6 @@ int z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb) EXPORT_SYMBOL(z8530_queue_xmit); -/** - * z8530_get_stats - Get network statistics - * @c: The channel to use - * - * Get the statistics block. We keep the statistics in software as - * the chip doesn't do it for us. - * - * Locking is ignored here - we could lock for a copy but its - * not likely to be that big an issue - */ - -struct net_device_stats *z8530_get_stats(struct z8530_channel *c) -{ - return &c->stats; -} - -EXPORT_SYMBOL(z8530_get_stats); - /* * Module support */ diff --git a/drivers/net/wan/z85230.h b/drivers/net/wan/z85230.h index 158aea7b8ea..4f372396c51 100644 --- a/drivers/net/wan/z85230.h +++ b/drivers/net/wan/z85230.h @@ -325,7 +325,6 @@ struct z8530_channel void *private; /* For our owner */ struct net_device *netdevice; /* Network layer device */ - struct net_device_stats stats; /* Network layer statistics */ /* * Async features @@ -366,13 +365,13 @@ struct z8530_channel unsigned char tx_active; /* character is being xmitted */ unsigned char tx_stopped; /* output is suspended */ - spinlock_t *lock; /* Devicr lock */ -}; + spinlock_t *lock; /* Device lock */ +}; /* * Each Z853x0 device. - */ - + */ + struct z8530_dev { char *name; /* Device instance name */ @@ -408,7 +407,6 @@ extern int z8530_sync_txdma_open(struct net_device *, struct z8530_channel *); extern int z8530_sync_txdma_close(struct net_device *, struct z8530_channel *); extern int z8530_channel_load(struct z8530_channel *, u8 *); extern int z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb); -extern struct net_device_stats *z8530_get_stats(struct z8530_channel *c); extern void z8530_null_rx(struct z8530_channel *c, struct sk_buff *skb); -- GitLab From 64bef7630ad5b0ccfdd73973e95cf7b7e39224d0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Wed, 2 Jul 2008 20:46:21 +0200 Subject: [PATCH 0095/1024] WAN: Port LMC driver to generic HDLC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/Kconfig | 7 +- drivers/net/wan/Makefile | 1 - drivers/net/wan/lmc/lmc_ioctl.h | 2 +- drivers/net/wan/lmc/lmc_main.c | 657 ++++++++++++++------------------ drivers/net/wan/lmc/lmc_media.c | 55 ++- drivers/net/wan/lmc/lmc_proto.c | 146 ++----- drivers/net/wan/lmc/lmc_proto.h | 14 +- drivers/net/wan/lmc/lmc_var.h | 136 +------ 8 files changed, 365 insertions(+), 653 deletions(-) diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 04c714aa7a6..766b8bf2f7a 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -61,7 +61,7 @@ config COSA # config LANMEDIA tristate "LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards" - depends on PCI && VIRT_TO_BUS + depends on PCI && VIRT_TO_BUS && HDLC ---help--- Driver for the following Lan Media family of serial boards: @@ -78,9 +78,8 @@ config LANMEDIA - LMC 5245 board connects directly to a T3 circuit saving the additional external hardware. - To change setting such as syncPPP vs Cisco HDLC or clock source you - will need lmcctl. It is available at - (broken link). + To change setting such as clock source you will need lmcctl. + It is available at (broken link). To compile this driver as a module, choose M here: the module will be called lmc. diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 5d27a17792c..102549605d0 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -26,7 +26,6 @@ obj-$(CONFIG_SEALEVEL_4021) += z85230.o sealevel.o obj-$(CONFIG_COSA) += cosa.o obj-$(CONFIG_FARSYNC) += farsync.o obj-$(CONFIG_DSCC4) += dscc4.o -obj-$(CONFIG_LANMEDIA) += syncppp.o obj-$(CONFIG_X25_ASY) += x25_asy.o obj-$(CONFIG_LANMEDIA) += lmc/ diff --git a/drivers/net/wan/lmc/lmc_ioctl.h b/drivers/net/wan/lmc/lmc_ioctl.h index 57dd861cd3d..72fb113a44c 100644 --- a/drivers/net/wan/lmc/lmc_ioctl.h +++ b/drivers/net/wan/lmc/lmc_ioctl.h @@ -61,7 +61,7 @@ /* * IFTYPE defines */ -#define LMC_PPP 1 /* use sppp interface */ +#define LMC_PPP 1 /* use generic HDLC interface */ #define LMC_NET 2 /* use direct net interface */ #define LMC_RAW 3 /* use direct net interface */ diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index 62133cee446..f64f4ca80b5 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -1,6 +1,7 @@ /* * Copyright (c) 1997-2000 LAN Media Corporation (LMC) * All rights reserved. www.lanmedia.com + * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa * * This code is written by: * Andrew Stanley-Jones (asj@cban.com) @@ -36,8 +37,6 @@ * */ -/* $Id: lmc_main.c,v 1.36 2000/04/11 05:25:25 asj Exp $ */ - #include #include #include @@ -49,6 +48,7 @@ #include #include #include +#include #include #include #include @@ -57,9 +57,6 @@ #include #include #include - -#include - #include /* Processor type for cache alignment. */ #include #include @@ -78,8 +75,6 @@ #include "lmc_debug.h" #include "lmc_proto.h" -static int lmc_first_load = 0; - static int LMC_PKT_BUF_SZ = 1542; static struct pci_device_id lmc_pci_tbl[] = { @@ -91,10 +86,9 @@ static struct pci_device_id lmc_pci_tbl[] = { }; MODULE_DEVICE_TABLE(pci, lmc_pci_tbl); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); -static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev); static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev); static int lmc_rx (struct net_device *dev); static int lmc_open(struct net_device *dev); @@ -114,20 +108,14 @@ static void lmc_driver_timeout(struct net_device *dev); * linux reserves 16 device specific IOCTLs. We call them * LMCIOC* to control various bits of our world. */ -int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ +int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ { - lmc_softc_t *sc; + lmc_softc_t *sc = dev_to_sc(dev); lmc_ctl_t ctl; - int ret; - u_int16_t regVal; + int ret = -EOPNOTSUPP; + u16 regVal; unsigned long flags; - struct sppp *sp; - - ret = -EOPNOTSUPP; - - sc = dev->priv; - lmc_trace(dev, "lmc_ioctl in"); /* @@ -149,7 +137,6 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ break; case LMCIOCSINFO: /*fold01*/ - sp = &((struct ppp_device *) dev)->sppp; if (!capable(CAP_NET_ADMIN)) { ret = -EPERM; break; @@ -175,25 +162,20 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ sc->TxDescriptControlInit &= ~LMC_TDES_ADD_CRC_DISABLE; } - if (ctl.keepalive_onoff == LMC_CTL_OFF) - sp->pp_flags &= ~PP_KEEPALIVE; /* Turn off */ - else - sp->pp_flags |= PP_KEEPALIVE; /* Turn on */ - ret = 0; break; case LMCIOCIFTYPE: /*fold01*/ { - u_int16_t old_type = sc->if_type; - u_int16_t new_type; + u16 old_type = sc->if_type; + u16 new_type; if (!capable(CAP_NET_ADMIN)) { ret = -EPERM; break; } - if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u_int16_t))) { + if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u16))) { ret = -EFAULT; break; } @@ -206,15 +188,11 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ } lmc_proto_close(sc); - lmc_proto_detach(sc); sc->if_type = new_type; -// lmc_proto_init(sc); lmc_proto_attach(sc); - lmc_proto_open(sc); - - ret = 0 ; - break ; + ret = lmc_proto_open(sc); + break; } case LMCIOCGETXINFO: /*fold01*/ @@ -241,51 +219,53 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ break; - case LMCIOCGETLMCSTATS: /*fold01*/ - if (sc->lmc_cardtype == LMC_CARDTYPE_T1){ - lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_LSB); - sc->stats.framingBitErrorCount += - lmc_mii_readreg (sc, 0, 18) & 0xff; - lmc_mii_writereg (sc, 0, 17, T1FRAMER_FERR_MSB); - sc->stats.framingBitErrorCount += - (lmc_mii_readreg (sc, 0, 18) & 0xff) << 8; - lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_LSB); - sc->stats.lineCodeViolationCount += - lmc_mii_readreg (sc, 0, 18) & 0xff; - lmc_mii_writereg (sc, 0, 17, T1FRAMER_LCV_MSB); - sc->stats.lineCodeViolationCount += - (lmc_mii_readreg (sc, 0, 18) & 0xff) << 8; - lmc_mii_writereg (sc, 0, 17, T1FRAMER_AERR); - regVal = lmc_mii_readreg (sc, 0, 18) & 0xff; - - sc->stats.lossOfFrameCount += - (regVal & T1FRAMER_LOF_MASK) >> 4; - sc->stats.changeOfFrameAlignmentCount += - (regVal & T1FRAMER_COFA_MASK) >> 2; - sc->stats.severelyErroredFrameCount += - regVal & T1FRAMER_SEF_MASK; - } - - if (copy_to_user(ifr->ifr_data, &sc->stats, - sizeof (struct lmc_statistics))) - ret = -EFAULT; - else - ret = 0; - break; + case LMCIOCGETLMCSTATS: + if (sc->lmc_cardtype == LMC_CARDTYPE_T1) { + lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_LSB); + sc->extra_stats.framingBitErrorCount += + lmc_mii_readreg(sc, 0, 18) & 0xff; + lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_MSB); + sc->extra_stats.framingBitErrorCount += + (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8; + lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_LSB); + sc->extra_stats.lineCodeViolationCount += + lmc_mii_readreg(sc, 0, 18) & 0xff; + lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_MSB); + sc->extra_stats.lineCodeViolationCount += + (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8; + lmc_mii_writereg(sc, 0, 17, T1FRAMER_AERR); + regVal = lmc_mii_readreg(sc, 0, 18) & 0xff; + + sc->extra_stats.lossOfFrameCount += + (regVal & T1FRAMER_LOF_MASK) >> 4; + sc->extra_stats.changeOfFrameAlignmentCount += + (regVal & T1FRAMER_COFA_MASK) >> 2; + sc->extra_stats.severelyErroredFrameCount += + regVal & T1FRAMER_SEF_MASK; + } + if (copy_to_user(ifr->ifr_data, &sc->lmc_device->stats, + sizeof(sc->lmc_device->stats)) || + copy_to_user(ifr->ifr_data + sizeof(sc->lmc_device->stats), + &sc->extra_stats, sizeof(sc->extra_stats))) + ret = -EFAULT; + else + ret = 0; + break; - case LMCIOCCLEARLMCSTATS: /*fold01*/ - if (!capable(CAP_NET_ADMIN)){ - ret = -EPERM; - break; - } + case LMCIOCCLEARLMCSTATS: + if (!capable(CAP_NET_ADMIN)) { + ret = -EPERM; + break; + } - memset (&sc->stats, 0, sizeof (struct lmc_statistics)); - sc->stats.check = STATCHECK; - sc->stats.version_size = (DRIVER_VERSION << 16) + - sizeof (struct lmc_statistics); - sc->stats.lmc_cardtype = sc->lmc_cardtype; - ret = 0; - break; + memset(&sc->lmc_device->stats, 0, sizeof(sc->lmc_device->stats)); + memset(&sc->extra_stats, 0, sizeof(sc->extra_stats)); + sc->extra_stats.check = STATCHECK; + sc->extra_stats.version_size = (DRIVER_VERSION << 16) + + sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats); + sc->extra_stats.lmc_cardtype = sc->lmc_cardtype; + ret = 0; + break; case LMCIOCSETCIRCUIT: /*fold01*/ if (!capable(CAP_NET_ADMIN)){ @@ -641,14 +621,12 @@ int lmc_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ /* the watchdog process that cruises around */ static void lmc_watchdog (unsigned long data) /*fold00*/ { - struct net_device *dev = (struct net_device *) data; - lmc_softc_t *sc; + struct net_device *dev = (struct net_device *)data; + lmc_softc_t *sc = dev_to_sc(dev); int link_status; u_int32_t ticks; unsigned long flags; - sc = dev->priv; - lmc_trace(dev, "lmc_watchdog in"); spin_lock_irqsave(&sc->lmc_lock, flags); @@ -677,22 +655,22 @@ static void lmc_watchdog (unsigned long data) /*fold00*/ * check for a transmit interrupt timeout * Has the packet xmt vs xmt serviced threshold been exceeded */ if (sc->lmc_taint_tx == sc->lastlmc_taint_tx && - sc->stats.tx_packets > sc->lasttx_packets && - sc->tx_TimeoutInd == 0) + sc->lmc_device->stats.tx_packets > sc->lasttx_packets && + sc->tx_TimeoutInd == 0) { /* wait for the watchdog to come around again */ sc->tx_TimeoutInd = 1; } else if (sc->lmc_taint_tx == sc->lastlmc_taint_tx && - sc->stats.tx_packets > sc->lasttx_packets && - sc->tx_TimeoutInd) + sc->lmc_device->stats.tx_packets > sc->lasttx_packets && + sc->tx_TimeoutInd) { LMC_EVENT_LOG(LMC_EVENT_XMTINTTMO, LMC_CSR_READ (sc, csr_status), 0); sc->tx_TimeoutDisplay = 1; - sc->stats.tx_TimeoutCnt++; + sc->extra_stats.tx_TimeoutCnt++; /* DEC chip is stuck, hit it with a RESET!!!! */ lmc_running_reset (dev); @@ -712,13 +690,11 @@ static void lmc_watchdog (unsigned long data) /*fold00*/ /* reset the transmit timeout detection flag */ sc->tx_TimeoutInd = 0; sc->lastlmc_taint_tx = sc->lmc_taint_tx; - sc->lasttx_packets = sc->stats.tx_packets; - } - else - { + sc->lasttx_packets = sc->lmc_device->stats.tx_packets; + } else { sc->tx_TimeoutInd = 0; sc->lastlmc_taint_tx = sc->lmc_taint_tx; - sc->lasttx_packets = sc->stats.tx_packets; + sc->lasttx_packets = sc->lmc_device->stats.tx_packets; } /* --- end time out check ----------------------------------- */ @@ -748,19 +724,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/ sc->last_link_status = 1; /* lmc_reset (sc); Again why reset??? */ - /* Inform the world that link protocol is back up. */ netif_carrier_on(dev); - - /* Now we have to tell the syncppp that we had an outage - * and that it should deal. Calling sppp_reopen here - * should do the trick, but we may have to call sppp_close - * when the link goes down, and call sppp_open here. - * Subject to more testing. - * --bbraun - */ - - lmc_proto_reopen(sc); - } /* Call media specific watchdog functions */ @@ -816,114 +780,93 @@ kick_timer: } -static void lmc_setup(struct net_device * const dev) /*fold00*/ +static int lmc_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) { - lmc_trace(dev, "lmc_setup in"); - - dev->type = ARPHRD_HDLC; - dev->hard_start_xmit = lmc_start_xmit; - dev->open = lmc_open; - dev->stop = lmc_close; - dev->get_stats = lmc_get_stats; - dev->do_ioctl = lmc_ioctl; - dev->tx_timeout = lmc_driver_timeout; - dev->watchdog_timeo = (HZ); /* 1 second */ - - lmc_trace(dev, "lmc_setup out"); + if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT) + return 0; + return -EINVAL; } - static int __devinit lmc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { - struct net_device *dev; - lmc_softc_t *sc; - u16 subdevice; - u_int16_t AdapModelNum; - int err = -ENOMEM; - static int cards_found; -#ifndef GCOM - /* We name by type not by vendor */ - static const char lmcname[] = "hdlc%d"; -#else - /* - * GCOM uses LMC vendor name so that clients can know which card - * to attach to. - */ - static const char lmcname[] = "lmc%d"; -#endif - - - /* - * Allocate our own device structure - */ - dev = alloc_netdev(sizeof(lmc_softc_t), lmcname, lmc_setup); - if (!dev) { - printk (KERN_ERR "lmc:alloc_netdev for device failed\n"); - goto out1; - } - - lmc_trace(dev, "lmc_init_one in"); - - err = pci_enable_device(pdev); - if (err) { - printk(KERN_ERR "lmc: pci enable failed:%d\n", err); - goto out2; - } - - if (pci_request_regions(pdev, "lmc")) { - printk(KERN_ERR "lmc: pci_request_region failed\n"); - err = -EIO; - goto out3; - } - - pci_set_drvdata(pdev, dev); - - if(lmc_first_load == 0){ - printk(KERN_INFO "Lan Media Corporation WAN Driver Version %d.%d.%d\n", - DRIVER_MAJOR_VERSION, DRIVER_MINOR_VERSION,DRIVER_SUB_VERSION); - lmc_first_load = 1; - } - - sc = dev->priv; - sc->lmc_device = dev; - sc->name = dev->name; - - /* Initialize the sppp layer */ - /* An ioctl can cause a subsequent detach for raw frame interface */ - dev->ml_priv = sc; - sc->if_type = LMC_PPP; - sc->check = 0xBEAFCAFE; - dev->base_addr = pci_resource_start(pdev, 0); - dev->irq = pdev->irq; - - SET_NETDEV_DEV(dev, &pdev->dev); - - /* - * This will get the protocol layer ready and do any 1 time init's - * Must have a valid sc and dev structure - */ - lmc_proto_init(sc); - - lmc_proto_attach(sc); + lmc_softc_t *sc; + struct net_device *dev; + u16 subdevice; + u16 AdapModelNum; + int err; + static int cards_found; + + /* lmc_trace(dev, "lmc_init_one in"); */ + + err = pci_enable_device(pdev); + if (err) { + printk(KERN_ERR "lmc: pci enable failed: %d\n", err); + return err; + } - /* - * Why were we changing this??? - dev->tx_queue_len = 100; - */ + err = pci_request_regions(pdev, "lmc"); + if (err) { + printk(KERN_ERR "lmc: pci_request_region failed\n"); + goto err_req_io; + } - /* Init the spin lock so can call it latter */ + /* + * Allocate our own device structure + */ + sc = kzalloc(sizeof(lmc_softc_t), GFP_KERNEL); + if (!sc) { + err = -ENOMEM; + goto err_kzalloc; + } - spin_lock_init(&sc->lmc_lock); - pci_set_master(pdev); + dev = alloc_hdlcdev(sc); + if (!dev) { + printk(KERN_ERR "lmc:alloc_netdev for device failed\n"); + goto err_hdlcdev; + } - printk ("%s: detected at %lx, irq %d\n", dev->name, - dev->base_addr, dev->irq); - if (register_netdev (dev) != 0) { - printk (KERN_ERR "%s: register_netdev failed.\n", dev->name); - goto out4; - } + dev->type = ARPHRD_HDLC; + dev_to_hdlc(dev)->xmit = lmc_start_xmit; + dev_to_hdlc(dev)->attach = lmc_attach; + dev->open = lmc_open; + dev->stop = lmc_close; + dev->get_stats = lmc_get_stats; + dev->do_ioctl = lmc_ioctl; + dev->tx_timeout = lmc_driver_timeout; + dev->watchdog_timeo = HZ; /* 1 second */ + dev->tx_queue_len = 100; + sc->lmc_device = dev; + sc->name = dev->name; + sc->if_type = LMC_PPP; + sc->check = 0xBEAFCAFE; + dev->base_addr = pci_resource_start(pdev, 0); + dev->irq = pdev->irq; + pci_set_drvdata(pdev, dev); + SET_NETDEV_DEV(dev, &pdev->dev); + + /* + * This will get the protocol layer ready and do any 1 time init's + * Must have a valid sc and dev structure + */ + lmc_proto_attach(sc); + + /* Init the spin lock so can call it latter */ + + spin_lock_init(&sc->lmc_lock); + pci_set_master(pdev); + + printk(KERN_INFO "%s: detected at %lx, irq %d\n", dev->name, + dev->base_addr, dev->irq); + + err = register_hdlc_device(dev); + if (err) { + printk(KERN_ERR "%s: register_netdev failed.\n", dev->name); + free_netdev(dev); + goto err_hdlcdev; + } sc->lmc_cardtype = LMC_CARDTYPE_UNKNOWN; sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT; @@ -939,27 +882,27 @@ static int __devinit lmc_init_one(struct pci_dev *pdev, switch (subdevice) { case PCI_DEVICE_ID_LMC_HSSI: - printk ("%s: LMC HSSI\n", dev->name); + printk(KERN_INFO "%s: LMC HSSI\n", dev->name); sc->lmc_cardtype = LMC_CARDTYPE_HSSI; sc->lmc_media = &lmc_hssi_media; break; case PCI_DEVICE_ID_LMC_DS3: - printk ("%s: LMC DS3\n", dev->name); + printk(KERN_INFO "%s: LMC DS3\n", dev->name); sc->lmc_cardtype = LMC_CARDTYPE_DS3; sc->lmc_media = &lmc_ds3_media; break; case PCI_DEVICE_ID_LMC_SSI: - printk ("%s: LMC SSI\n", dev->name); + printk(KERN_INFO "%s: LMC SSI\n", dev->name); sc->lmc_cardtype = LMC_CARDTYPE_SSI; sc->lmc_media = &lmc_ssi_media; break; case PCI_DEVICE_ID_LMC_T1: - printk ("%s: LMC T1\n", dev->name); + printk(KERN_INFO "%s: LMC T1\n", dev->name); sc->lmc_cardtype = LMC_CARDTYPE_T1; sc->lmc_media = &lmc_t1_media; break; default: - printk (KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name); + printk(KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name); break; } @@ -977,32 +920,28 @@ static int __devinit lmc_init_one(struct pci_dev *pdev, */ AdapModelNum = (lmc_mii_readreg (sc, 0, 3) & 0x3f0) >> 4; - if ((AdapModelNum == LMC_ADAP_T1 - && subdevice == PCI_DEVICE_ID_LMC_T1) || /* detect LMC1200 */ - (AdapModelNum == LMC_ADAP_SSI - && subdevice == PCI_DEVICE_ID_LMC_SSI) || /* detect LMC1000 */ - (AdapModelNum == LMC_ADAP_DS3 - && subdevice == PCI_DEVICE_ID_LMC_DS3) || /* detect LMC5245 */ - (AdapModelNum == LMC_ADAP_HSSI - && subdevice == PCI_DEVICE_ID_LMC_HSSI)) - { /* detect LMC5200 */ + if ((AdapModelNum != LMC_ADAP_T1 || /* detect LMC1200 */ + subdevice != PCI_DEVICE_ID_LMC_T1) && + (AdapModelNum != LMC_ADAP_SSI || /* detect LMC1000 */ + subdevice != PCI_DEVICE_ID_LMC_SSI) && + (AdapModelNum != LMC_ADAP_DS3 || /* detect LMC5245 */ + subdevice != PCI_DEVICE_ID_LMC_DS3) && + (AdapModelNum != LMC_ADAP_HSSI || /* detect LMC5200 */ + subdevice != PCI_DEVICE_ID_LMC_HSSI)) + printk(KERN_WARNING "%s: Model number (%d) miscompare for PCI" + " Subsystem ID = 0x%04x\n", + dev->name, AdapModelNum, subdevice); - } - else { - printk ("%s: Model number (%d) miscompare for PCI Subsystem ID = 0x%04x\n", - dev->name, AdapModelNum, subdevice); -// return (NULL); - } /* * reset clock */ LMC_CSR_WRITE (sc, csr_gp_timer, 0xFFFFFFFFUL); sc->board_idx = cards_found++; - sc->stats.check = STATCHECK; - sc->stats.version_size = (DRIVER_VERSION << 16) + - sizeof (struct lmc_statistics); - sc->stats.lmc_cardtype = sc->lmc_cardtype; + sc->extra_stats.check = STATCHECK; + sc->extra_stats.version_size = (DRIVER_VERSION << 16) + + sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats); + sc->extra_stats.lmc_cardtype = sc->lmc_cardtype; sc->lmc_ok = 0; sc->last_link_status = 0; @@ -1010,58 +949,51 @@ static int __devinit lmc_init_one(struct pci_dev *pdev, lmc_trace(dev, "lmc_init_one out"); return 0; - out4: - lmc_proto_detach(sc); - out3: - if (pdev) { - pci_release_regions(pdev); - pci_set_drvdata(pdev, NULL); - } - out2: - free_netdev(dev); - out1: - return err; +err_hdlcdev: + pci_set_drvdata(pdev, NULL); + kfree(sc); +err_kzalloc: + pci_release_regions(pdev); +err_req_io: + pci_disable_device(pdev); + return err; } /* * Called from pci when removing module. */ -static void __devexit lmc_remove_one (struct pci_dev *pdev) +static void __devexit lmc_remove_one(struct pci_dev *pdev) { - struct net_device *dev = pci_get_drvdata(pdev); - - if (dev) { - lmc_softc_t *sc = dev->priv; - - printk("%s: removing...\n", dev->name); - lmc_proto_detach(sc); - unregister_netdev(dev); - free_netdev(dev); - pci_release_regions(pdev); - pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); - } + struct net_device *dev = pci_get_drvdata(pdev); + + if (dev) { + printk(KERN_DEBUG "%s: removing...\n", dev->name); + unregister_hdlc_device(dev); + free_netdev(dev); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + } } /* After this is called, packets can be sent. * Does not initialize the addresses */ -static int lmc_open (struct net_device *dev) /*fold00*/ +static int lmc_open(struct net_device *dev) { - lmc_softc_t *sc = dev->priv; + lmc_softc_t *sc = dev_to_sc(dev); + int err; lmc_trace(dev, "lmc_open in"); lmc_led_on(sc, LMC_DS3_LED0); - lmc_dec_reset (sc); - lmc_reset (sc); - - LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0); - LMC_EVENT_LOG(LMC_EVENT_RESET2, - lmc_mii_readreg (sc, 0, 16), - lmc_mii_readreg (sc, 0, 17)); + lmc_dec_reset(sc); + lmc_reset(sc); + LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ(sc, csr_status), 0); + LMC_EVENT_LOG(LMC_EVENT_RESET2, lmc_mii_readreg(sc, 0, 16), + lmc_mii_readreg(sc, 0, 17)); if (sc->lmc_ok){ lmc_trace(dev, "lmc_open lmc_ok out"); @@ -1106,14 +1038,14 @@ static int lmc_open (struct net_device *dev) /*fold00*/ /* dev->flags |= IFF_UP; */ - lmc_proto_open(sc); + if ((err = lmc_proto_open(sc)) != 0) + return err; dev->do_ioctl = lmc_ioctl; netif_start_queue(dev); - - sc->stats.tx_tbusy0++ ; + sc->extra_stats.tx_tbusy0++; /* * select what interrupts we want to get @@ -1165,8 +1097,7 @@ static int lmc_open (struct net_device *dev) /*fold00*/ static void lmc_running_reset (struct net_device *dev) /*fold00*/ { - - lmc_softc_t *sc = (lmc_softc_t *) dev->priv; + lmc_softc_t *sc = dev_to_sc(dev); lmc_trace(dev, "lmc_runnig_reset in"); @@ -1184,7 +1115,7 @@ static void lmc_running_reset (struct net_device *dev) /*fold00*/ netif_wake_queue(dev); sc->lmc_txfull = 0; - sc->stats.tx_tbusy0++ ; + sc->extra_stats.tx_tbusy0++; sc->lmc_intrmask = TULIP_DEFAULT_INTR_MASK; LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask); @@ -1200,14 +1131,13 @@ static void lmc_running_reset (struct net_device *dev) /*fold00*/ * This disables the timer for the watchdog and keepalives, * and disables the irq for dev. */ -static int lmc_close (struct net_device *dev) /*fold00*/ +static int lmc_close(struct net_device *dev) { /* not calling release_region() as we should */ - lmc_softc_t *sc; + lmc_softc_t *sc = dev_to_sc(dev); lmc_trace(dev, "lmc_close in"); - - sc = dev->priv; + sc->lmc_ok = 0; sc->lmc_media->set_link_status (sc, 0); del_timer (&sc->timer); @@ -1215,7 +1145,7 @@ static int lmc_close (struct net_device *dev) /*fold00*/ lmc_ifdown (dev); lmc_trace(dev, "lmc_close out"); - + return 0; } @@ -1223,16 +1153,16 @@ static int lmc_close (struct net_device *dev) /*fold00*/ /* When the interface goes down, this is called */ static int lmc_ifdown (struct net_device *dev) /*fold00*/ { - lmc_softc_t *sc = dev->priv; + lmc_softc_t *sc = dev_to_sc(dev); u32 csr6; int i; lmc_trace(dev, "lmc_ifdown in"); - + /* Don't let anything else go on right now */ // dev->start = 0; netif_stop_queue(dev); - sc->stats.tx_tbusy1++ ; + sc->extra_stats.tx_tbusy1++; /* stop interrupts */ /* Clear the interrupt mask */ @@ -1244,8 +1174,8 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/ csr6 &= ~LMC_DEC_SR; /* Turn off the Receive bit */ LMC_CSR_WRITE (sc, csr_command, csr6); - sc->stats.rx_missed_errors += - LMC_CSR_READ (sc, csr_missed_frames) & 0xffff; + sc->lmc_device->stats.rx_missed_errors += + LMC_CSR_READ(sc, csr_missed_frames) & 0xffff; /* release the interrupt */ if(sc->got_irq == 1){ @@ -1276,7 +1206,7 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/ lmc_led_off (sc, LMC_MII16_LED_ALL); netif_wake_queue(dev); - sc->stats.tx_tbusy0++ ; + sc->extra_stats.tx_tbusy0++; lmc_trace(dev, "lmc_ifdown out"); @@ -1289,7 +1219,7 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/ { struct net_device *dev = (struct net_device *) dev_instance; - lmc_softc_t *sc; + lmc_softc_t *sc = dev_to_sc(dev); u32 csr; int i; s32 stat; @@ -1300,8 +1230,6 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/ lmc_trace(dev, "lmc_interrupt in"); - sc = dev->priv; - spin_lock(&sc->lmc_lock); /* @@ -1354,7 +1282,7 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/ int n_compl = 0 ; /* reset the transmit timeout detection flag -baz */ - sc->stats.tx_NoCompleteCnt = 0; + sc->extra_stats.tx_NoCompleteCnt = 0; badtx = sc->lmc_taint_tx; i = badtx % LMC_TXDESCS; @@ -1378,27 +1306,25 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/ if (sc->lmc_txq[i] == NULL) continue; - /* - * Check the total error summary to look for any errors - */ - if (stat & 0x8000) { - sc->stats.tx_errors++; - if (stat & 0x4104) - sc->stats.tx_aborted_errors++; - if (stat & 0x0C00) - sc->stats.tx_carrier_errors++; - if (stat & 0x0200) - sc->stats.tx_window_errors++; - if (stat & 0x0002) - sc->stats.tx_fifo_errors++; - } - else { - - sc->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff; - - sc->stats.tx_packets++; + /* + * Check the total error summary to look for any errors + */ + if (stat & 0x8000) { + sc->lmc_device->stats.tx_errors++; + if (stat & 0x4104) + sc->lmc_device->stats.tx_aborted_errors++; + if (stat & 0x0C00) + sc->lmc_device->stats.tx_carrier_errors++; + if (stat & 0x0200) + sc->lmc_device->stats.tx_window_errors++; + if (stat & 0x0002) + sc->lmc_device->stats.tx_fifo_errors++; + } else { + sc->lmc_device->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff; + + sc->lmc_device->stats.tx_packets++; } - + // dev_kfree_skb(sc->lmc_txq[i]); dev_kfree_skb_irq(sc->lmc_txq[i]); sc->lmc_txq[i] = NULL; @@ -1415,13 +1341,13 @@ static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/ LMC_EVENT_LOG(LMC_EVENT_TBUSY0, n_compl, 0); sc->lmc_txfull = 0; netif_wake_queue(dev); - sc->stats.tx_tbusy0++ ; + sc->extra_stats.tx_tbusy0++; #ifdef DEBUG - sc->stats.dirtyTx = badtx; - sc->stats.lmc_next_tx = sc->lmc_next_tx; - sc->stats.lmc_txfull = sc->lmc_txfull; + sc->extra_stats.dirtyTx = badtx; + sc->extra_stats.lmc_next_tx = sc->lmc_next_tx; + sc->extra_stats.lmc_txfull = sc->lmc_txfull; #endif sc->lmc_taint_tx = badtx; @@ -1476,9 +1402,9 @@ lmc_int_fail_out: return IRQ_RETVAL(handled); } -static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00*/ +static int lmc_start_xmit(struct sk_buff *skb, struct net_device *dev) { - lmc_softc_t *sc; + lmc_softc_t *sc = dev_to_sc(dev); u32 flag; int entry; int ret = 0; @@ -1486,8 +1412,6 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00 lmc_trace(dev, "lmc_start_xmit in"); - sc = dev->priv; - spin_lock_irqsave(&sc->lmc_lock, flags); /* normal path, tbusy known to be zero */ @@ -1532,8 +1456,8 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00 if (sc->lmc_next_tx - sc->lmc_taint_tx >= LMC_TXDESCS - 1) { /* ring full, go busy */ sc->lmc_txfull = 1; - netif_stop_queue(dev); - sc->stats.tx_tbusy1++ ; + netif_stop_queue(dev); + sc->extra_stats.tx_tbusy1++; LMC_EVENT_LOG(LMC_EVENT_TBUSY1, entry, 0); } #endif @@ -1550,7 +1474,7 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00 * the watchdog timer handler. -baz */ - sc->stats.tx_NoCompleteCnt++; + sc->extra_stats.tx_NoCompleteCnt++; sc->lmc_next_tx++; /* give ownership to the chip */ @@ -1569,9 +1493,9 @@ static int lmc_start_xmit (struct sk_buff *skb, struct net_device *dev) /*fold00 } -static int lmc_rx (struct net_device *dev) /*fold00*/ +static int lmc_rx(struct net_device *dev) { - lmc_softc_t *sc; + lmc_softc_t *sc = dev_to_sc(dev); int i; int rx_work_limit = LMC_RXDESCS; unsigned int next_rx; @@ -1583,8 +1507,6 @@ static int lmc_rx (struct net_device *dev) /*fold00*/ lmc_trace(dev, "lmc_rx in"); - sc = dev->priv; - lmc_led_on(sc, LMC_DS3_LED3); rxIntLoopCnt = 0; /* debug -baz */ @@ -1597,39 +1519,38 @@ static int lmc_rx (struct net_device *dev) /*fold00*/ rxIntLoopCnt++; /* debug -baz */ len = ((stat & LMC_RDES_FRAME_LENGTH) >> RDES_FRAME_LENGTH_BIT_NUMBER); if ((stat & 0x0300) != 0x0300) { /* Check first segment and last segment */ - if ((stat & 0x0000ffff) != 0x7fff) { - /* Oversized frame */ - sc->stats.rx_length_errors++; - goto skip_packet; - } - } - - if(stat & 0x00000008){ /* Catch a dribbling bit error */ - sc->stats.rx_errors++; - sc->stats.rx_frame_errors++; - goto skip_packet; - } + if ((stat & 0x0000ffff) != 0x7fff) { + /* Oversized frame */ + sc->lmc_device->stats.rx_length_errors++; + goto skip_packet; + } + } + if (stat & 0x00000008) { /* Catch a dribbling bit error */ + sc->lmc_device->stats.rx_errors++; + sc->lmc_device->stats.rx_frame_errors++; + goto skip_packet; + } - if(stat & 0x00000004){ /* Catch a CRC error by the Xilinx */ - sc->stats.rx_errors++; - sc->stats.rx_crc_errors++; - goto skip_packet; - } + if (stat & 0x00000004) { /* Catch a CRC error by the Xilinx */ + sc->lmc_device->stats.rx_errors++; + sc->lmc_device->stats.rx_crc_errors++; + goto skip_packet; + } - if (len > LMC_PKT_BUF_SZ){ - sc->stats.rx_length_errors++; - localLengthErrCnt++; - goto skip_packet; - } + if (len > LMC_PKT_BUF_SZ) { + sc->lmc_device->stats.rx_length_errors++; + localLengthErrCnt++; + goto skip_packet; + } - if (len < sc->lmc_crcSize + 2) { - sc->stats.rx_length_errors++; - sc->stats.rx_SmallPktCnt++; - localLengthErrCnt++; - goto skip_packet; - } + if (len < sc->lmc_crcSize + 2) { + sc->lmc_device->stats.rx_length_errors++; + sc->extra_stats.rx_SmallPktCnt++; + localLengthErrCnt++; + goto skip_packet; + } if(stat & 0x00004000){ printk(KERN_WARNING "%s: Receiver descriptor error, receiver out of sync?\n", dev->name); @@ -1656,8 +1577,8 @@ static int lmc_rx (struct net_device *dev) /*fold00*/ } dev->last_rx = jiffies; - sc->stats.rx_packets++; - sc->stats.rx_bytes += len; + sc->lmc_device->stats.rx_packets++; + sc->lmc_device->stats.rx_bytes += len; LMC_CONSOLE_LOG("recv", skb->data, len); @@ -1679,7 +1600,6 @@ static int lmc_rx (struct net_device *dev) /*fold00*/ skb_put (skb, len); skb->protocol = lmc_proto_type(sc, skb); - skb->protocol = htons(ETH_P_WAN_PPP); skb_reset_mac_header(skb); /* skb_reset_network_header(skb); */ skb->dev = dev; @@ -1704,7 +1624,7 @@ static int lmc_rx (struct net_device *dev) /*fold00*/ * in which care we'll try to allocate the buffer * again. (once a second) */ - sc->stats.rx_BuffAllocErr++; + sc->extra_stats.rx_BuffAllocErr++; LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len); sc->failed_recv_alloc = 1; goto skip_out_of_mem; @@ -1739,16 +1659,14 @@ static int lmc_rx (struct net_device *dev) /*fold00*/ * descriptors with bogus packets * if (localLengthErrCnt > LMC_RXDESCS - 3) { - sc->stats.rx_BadPktSurgeCnt++; - LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE, - localLengthErrCnt, - sc->stats.rx_BadPktSurgeCnt); + sc->extra_stats.rx_BadPktSurgeCnt++; + LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE, localLengthErrCnt, + sc->extra_stats.rx_BadPktSurgeCnt); } */ /* save max count of receive descriptors serviced */ - if (rxIntLoopCnt > sc->stats.rxIntLoopCnt) { - sc->stats.rxIntLoopCnt = rxIntLoopCnt; /* debug -baz */ - } + if (rxIntLoopCnt > sc->extra_stats.rxIntLoopCnt) + sc->extra_stats.rxIntLoopCnt = rxIntLoopCnt; /* debug -baz */ #ifdef DEBUG if (rxIntLoopCnt == 0) @@ -1775,23 +1693,22 @@ skip_out_of_mem: return 0; } -static struct net_device_stats *lmc_get_stats (struct net_device *dev) /*fold00*/ +static struct net_device_stats *lmc_get_stats(struct net_device *dev) { - lmc_softc_t *sc = dev->priv; + lmc_softc_t *sc = dev_to_sc(dev); unsigned long flags; lmc_trace(dev, "lmc_get_stats in"); - spin_lock_irqsave(&sc->lmc_lock, flags); - sc->stats.rx_missed_errors += LMC_CSR_READ (sc, csr_missed_frames) & 0xffff; + sc->lmc_device->stats.rx_missed_errors += LMC_CSR_READ(sc, csr_missed_frames) & 0xffff; spin_unlock_irqrestore(&sc->lmc_lock, flags); lmc_trace(dev, "lmc_get_stats out"); - return (struct net_device_stats *) &sc->stats; + return &sc->lmc_device->stats; } static struct pci_driver lmc_driver = { @@ -1970,7 +1887,7 @@ static void lmc_softreset (lmc_softc_t * const sc) /*fold00*/ { if (sc->lmc_txq[i] != NULL){ /* have buffer */ dev_kfree_skb(sc->lmc_txq[i]); /* free it */ - sc->stats.tx_dropped++; /* We just dropped a packet */ + sc->lmc_device->stats.tx_dropped++; /* We just dropped a packet */ } sc->lmc_txq[i] = NULL; sc->lmc_txring[i].status = 0x00000000; @@ -2061,7 +1978,7 @@ static void lmc_reset(lmc_softc_t * const sc) /*fold00*/ */ sc->lmc_media->init(sc); - sc->stats.resetCount++; + sc->extra_stats.resetCount++; lmc_trace(sc->lmc_device, "lmc_reset out"); } @@ -2151,23 +2068,21 @@ static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, /*fold00 lmc_trace(sc->lmc_device, "lmc_initcsrs out"); } -static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/ - lmc_softc_t *sc; +static void lmc_driver_timeout(struct net_device *dev) +{ + lmc_softc_t *sc = dev_to_sc(dev); u32 csr6; unsigned long flags; lmc_trace(dev, "lmc_driver_timeout in"); - sc = dev->priv; - spin_lock_irqsave(&sc->lmc_lock, flags); printk("%s: Xmitter busy|\n", dev->name); - sc->stats.tx_tbusy_calls++ ; - if (jiffies - dev->trans_start < TX_TIMEOUT) { - goto bug_out; - } + sc->extra_stats.tx_tbusy_calls++; + if (jiffies - dev->trans_start < TX_TIMEOUT) + goto bug_out; /* * Chip seems to have locked up @@ -2178,7 +2093,7 @@ static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/ LMC_EVENT_LOG(LMC_EVENT_XMTPRCTMO, LMC_CSR_READ (sc, csr_status), - sc->stats.tx_ProcTimeout); + sc->extra_stats.tx_ProcTimeout); lmc_running_reset (dev); @@ -2195,8 +2110,8 @@ static void lmc_driver_timeout(struct net_device *dev) { /*fold00*/ /* immediate transmit */ LMC_CSR_WRITE (sc, csr_txpoll, 0); - sc->stats.tx_errors++; - sc->stats.tx_ProcTimeout++; /* -baz */ + sc->lmc_device->stats.tx_errors++; + sc->extra_stats.tx_ProcTimeout++; /* -baz */ dev->trans_start = jiffies; diff --git a/drivers/net/wan/lmc/lmc_media.c b/drivers/net/wan/lmc/lmc_media.c index 1cc5834ebbc..2e0711a956c 100644 --- a/drivers/net/wan/lmc/lmc_media.c +++ b/drivers/net/wan/lmc/lmc_media.c @@ -425,7 +425,7 @@ lmc_ds3_set_scram (lmc_softc_t * const sc, int ie) static int lmc_ds3_get_link_status (lmc_softc_t * const sc) { - u_int16_t link_status, link_status_11; + u16 link_status, link_status_11; int ret = 1; lmc_mii_writereg (sc, 0, 17, 7); @@ -447,7 +447,7 @@ lmc_ds3_get_link_status (lmc_softc_t * const sc) (link_status & LMC_FRAMER_REG0_OOFS)){ ret = 0; if(sc->last_led_err[3] != 1){ - u16 r1; + u16 r1; lmc_mii_writereg (sc, 0, 17, 01); /* Turn on Xbit error as our cisco does */ r1 = lmc_mii_readreg (sc, 0, 18); r1 &= 0xfe; @@ -460,7 +460,7 @@ lmc_ds3_get_link_status (lmc_softc_t * const sc) else { lmc_led_off(sc, LMC_DS3_LED3); /* turn on red LED */ if(sc->last_led_err[3] == 1){ - u16 r1; + u16 r1; lmc_mii_writereg (sc, 0, 17, 01); /* Turn off Xbit error */ r1 = lmc_mii_readreg (sc, 0, 18); r1 |= 0x01; @@ -538,20 +538,19 @@ lmc_ds3_watchdog (lmc_softc_t * const sc) * SSI methods */ -static void -lmc_ssi_init (lmc_softc_t * const sc) +static void lmc_ssi_init(lmc_softc_t * const sc) { - u_int16_t mii17; - int cable; + u16 mii17; + int cable; - sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1000; + sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1000; - mii17 = lmc_mii_readreg (sc, 0, 17); + mii17 = lmc_mii_readreg(sc, 0, 17); - cable = (mii17 & LMC_MII17_SSI_CABLE_MASK) >> LMC_MII17_SSI_CABLE_SHIFT; - sc->ictl.cable_type = cable; + cable = (mii17 & LMC_MII17_SSI_CABLE_MASK) >> LMC_MII17_SSI_CABLE_SHIFT; + sc->ictl.cable_type = cable; - lmc_gpio_mkoutput (sc, LMC_GEP_SSI_TXCLOCK); + lmc_gpio_mkoutput(sc, LMC_GEP_SSI_TXCLOCK); } static void @@ -679,11 +678,11 @@ lmc_ssi_set_speed (lmc_softc_t * const sc, lmc_ctl_t * ctl) static int lmc_ssi_get_link_status (lmc_softc_t * const sc) { - u_int16_t link_status; + u16 link_status; u_int32_t ticks; int ret = 1; int hw_hdsk = 1; - + /* * missing CTS? Hmm. If we require CTS on, we may never get the * link to come up, so omit it in this test. @@ -718,9 +717,9 @@ lmc_ssi_get_link_status (lmc_softc_t * const sc) } else if (ticks == 0 ) { /* no clock found ? */ ret = 0; - if(sc->last_led_err[3] != 1){ - sc->stats.tx_lossOfClockCnt++; - printk(KERN_WARNING "%s: Lost Clock, Link Down\n", sc->name); + if (sc->last_led_err[3] != 1) { + sc->extra_stats.tx_lossOfClockCnt++; + printk(KERN_WARNING "%s: Lost Clock, Link Down\n", sc->name); } sc->last_led_err[3] = 1; lmc_led_on (sc, LMC_MII16_LED3); /* turn ON red LED */ @@ -885,19 +884,13 @@ write_av9110 (lmc_softc_t * sc, u_int32_t n, u_int32_t m, u_int32_t v, | LMC_GEP_SSI_GENERATOR)); } -static void -lmc_ssi_watchdog (lmc_softc_t * const sc) +static void lmc_ssi_watchdog(lmc_softc_t * const sc) { - u_int16_t mii17 = lmc_mii_readreg (sc, 0, 17); - if (((mii17 >> 3) & 7) == 7) - { - lmc_led_off (sc, LMC_MII16_LED2); - } - else - { - lmc_led_on (sc, LMC_MII16_LED2); - } - + u16 mii17 = lmc_mii_readreg(sc, 0, 17); + if (((mii17 >> 3) & 7) == 7) + lmc_led_off(sc, LMC_MII16_LED2); + else + lmc_led_on(sc, LMC_MII16_LED2); } /* @@ -927,7 +920,7 @@ lmc_t1_read (lmc_softc_t * const sc, int a) static void lmc_t1_init (lmc_softc_t * const sc) { - u_int16_t mii16; + u16 mii16; int i; sc->ictl.cardtype = LMC_CTL_CARDTYPE_LMC1200; @@ -1026,7 +1019,7 @@ lmc_t1_set_status (lmc_softc_t * const sc, lmc_ctl_t * ctl) */ static int lmc_t1_get_link_status (lmc_softc_t * const sc) { - u_int16_t link_status; + u16 link_status; int ret = 1; /* LMC5245 (DS3) & LMC1200 (DS1) LED definitions diff --git a/drivers/net/wan/lmc/lmc_proto.c b/drivers/net/wan/lmc/lmc_proto.c index 85315758198..be9877ff551 100644 --- a/drivers/net/wan/lmc/lmc_proto.c +++ b/drivers/net/wan/lmc/lmc_proto.c @@ -36,9 +36,6 @@ #include #include #include - -#include - #include /* Processor type for cache alignment. */ #include #include @@ -50,48 +47,6 @@ #include "lmc_ioctl.h" #include "lmc_proto.h" -/* - * The compile-time variable SPPPSTUP causes the module to be - * compiled without referencing any of the sync ppp routines. - */ -#ifdef SPPPSTUB -#define SPPP_detach(d) (void)0 -#define SPPP_open(d) 0 -#define SPPP_reopen(d) (void)0 -#define SPPP_close(d) (void)0 -#define SPPP_attach(d) (void)0 -#define SPPP_do_ioctl(d,i,c) -EOPNOTSUPP -#else -#define SPPP_attach(x) sppp_attach((x)->pd) -#define SPPP_detach(x) sppp_detach((x)->pd->dev) -#define SPPP_open(x) sppp_open((x)->pd->dev) -#define SPPP_reopen(x) sppp_reopen((x)->pd->dev) -#define SPPP_close(x) sppp_close((x)->pd->dev) -#define SPPP_do_ioctl(x, y, z) sppp_do_ioctl((x)->pd->dev, (y), (z)) -#endif - -// init -void lmc_proto_init(lmc_softc_t *sc) /*FOLD00*/ -{ - lmc_trace(sc->lmc_device, "lmc_proto_init in"); - switch(sc->if_type){ - case LMC_PPP: - sc->pd = kmalloc(sizeof(struct ppp_device), GFP_KERNEL); - if (!sc->pd) { - printk("lmc_proto_init(): kmalloc failure!\n"); - return; - } - sc->pd->dev = sc->lmc_device; - sc->if_ptr = sc->pd; - break; - case LMC_RAW: - break; - default: - break; - } - lmc_trace(sc->lmc_device, "lmc_proto_init out"); -} - // attach void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/ { @@ -100,7 +55,6 @@ void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/ case LMC_PPP: { struct net_device *dev = sc->lmc_device; - SPPP_attach(sc); dev->do_ioctl = lmc_ioctl; } break; @@ -108,7 +62,7 @@ void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/ { struct net_device *dev = sc->lmc_device; /* - * They set a few basics because they don't use sync_ppp + * They set a few basics because they don't use HDLC */ dev->flags |= IFF_POINTOPOINT; @@ -124,88 +78,39 @@ void lmc_proto_attach(lmc_softc_t *sc) /*FOLD00*/ lmc_trace(sc->lmc_device, "lmc_proto_attach out"); } -// detach -void lmc_proto_detach(lmc_softc_t *sc) /*FOLD00*/ +int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd) { - switch(sc->if_type){ - case LMC_PPP: - SPPP_detach(sc); - break; - case LMC_RAW: /* Tell someone we're detaching? */ - break; - default: - break; - } - + lmc_trace(sc->lmc_device, "lmc_proto_ioctl"); + if (sc->if_type == LMC_PPP) + return hdlc_ioctl(sc->lmc_device, ifr, cmd); + return -EOPNOTSUPP; } -// reopen -void lmc_proto_reopen(lmc_softc_t *sc) /*FOLD00*/ +int lmc_proto_open(lmc_softc_t *sc) { - lmc_trace(sc->lmc_device, "lmc_proto_reopen in"); - switch(sc->if_type){ - case LMC_PPP: - SPPP_reopen(sc); - break; - case LMC_RAW: /* Reset the interface after being down, prerape to receive packets again */ - break; - default: - break; - } - lmc_trace(sc->lmc_device, "lmc_proto_reopen out"); -} + int ret = 0; + lmc_trace(sc->lmc_device, "lmc_proto_open in"); -// ioctl -int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd) /*FOLD00*/ -{ - lmc_trace(sc->lmc_device, "lmc_proto_ioctl out"); - switch(sc->if_type){ - case LMC_PPP: - return SPPP_do_ioctl (sc, ifr, cmd); - break; - default: - return -EOPNOTSUPP; - break; - } - lmc_trace(sc->lmc_device, "lmc_proto_ioctl out"); + if (sc->if_type == LMC_PPP) { + ret = hdlc_open(sc->lmc_device); + if (ret < 0) + printk(KERN_WARNING "%s: HDLC open failed: %d\n", + sc->name, ret); + } + + lmc_trace(sc->lmc_device, "lmc_proto_open out"); + return ret; } -// open -void lmc_proto_open(lmc_softc_t *sc) /*FOLD00*/ +void lmc_proto_close(lmc_softc_t *sc) { - int ret; + lmc_trace(sc->lmc_device, "lmc_proto_close in"); - lmc_trace(sc->lmc_device, "lmc_proto_open in"); - switch(sc->if_type){ - case LMC_PPP: - ret = SPPP_open(sc); - if(ret < 0) - printk("%s: syncPPP open failed: %d\n", sc->name, ret); - break; - case LMC_RAW: /* We're about to start getting packets! */ - break; - default: - break; - } - lmc_trace(sc->lmc_device, "lmc_proto_open out"); -} - -// close + if (sc->if_type == LMC_PPP) + hdlc_close(sc->lmc_device); -void lmc_proto_close(lmc_softc_t *sc) /*FOLD00*/ -{ - lmc_trace(sc->lmc_device, "lmc_proto_close in"); - switch(sc->if_type){ - case LMC_PPP: - SPPP_close(sc); - break; - case LMC_RAW: /* Interface going down */ - break; - default: - break; - } - lmc_trace(sc->lmc_device, "lmc_proto_close out"); + lmc_trace(sc->lmc_device, "lmc_proto_close out"); } __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/ @@ -213,8 +118,8 @@ __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/ lmc_trace(sc->lmc_device, "lmc_proto_type in"); switch(sc->if_type){ case LMC_PPP: - return htons(ETH_P_WAN_PPP); - break; + return hdlc_type_trans(skb, sc->lmc_device); + break; case LMC_NET: return htons(ETH_P_802_2); break; @@ -245,4 +150,3 @@ void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/ } lmc_trace(sc->lmc_device, "lmc_proto_netif out"); } - diff --git a/drivers/net/wan/lmc/lmc_proto.h b/drivers/net/wan/lmc/lmc_proto.h index ccaa69e8b3c..662148c5464 100644 --- a/drivers/net/wan/lmc/lmc_proto.h +++ b/drivers/net/wan/lmc/lmc_proto.h @@ -1,16 +1,18 @@ #ifndef _LMC_PROTO_H_ #define _LMC_PROTO_H_ -void lmc_proto_init(lmc_softc_t *sc); +#include + void lmc_proto_attach(lmc_softc_t *sc); -void lmc_proto_detach(lmc_softc_t *sc); -void lmc_proto_reopen(lmc_softc_t *sc); int lmc_proto_ioctl(lmc_softc_t *sc, struct ifreq *ifr, int cmd); -void lmc_proto_open(lmc_softc_t *sc); +int lmc_proto_open(lmc_softc_t *sc); void lmc_proto_close(lmc_softc_t *sc); __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb); void lmc_proto_netif(lmc_softc_t *sc, struct sk_buff *skb); -int lmc_skb_rawpackets(char *buf, char **start, off_t offset, int len, int unused); -#endif +static inline lmc_softc_t* dev_to_sc(struct net_device *dev) +{ + return (lmc_softc_t *)dev_to_hdlc(dev)->priv; +} +#endif diff --git a/drivers/net/wan/lmc/lmc_var.h b/drivers/net/wan/lmc/lmc_var.h index 6d003a39bfa..52e044209d5 100644 --- a/drivers/net/wan/lmc/lmc_var.h +++ b/drivers/net/wan/lmc/lmc_var.h @@ -1,8 +1,6 @@ #ifndef _LMC_VAR_H_ #define _LMC_VAR_H_ -/* $Id: lmc_var.h,v 1.17 2000/04/06 12:16:47 asj Exp $ */ - /* * Copyright (c) 1997-2000 LAN Media Corporation (LMC) * All rights reserved. www.lanmedia.com @@ -19,23 +17,6 @@ #include -#ifndef __KERNEL__ -typedef signed char s8; -typedef unsigned char u8; - -typedef signed short s16; -typedef unsigned short u16; - -typedef signed int s32; -typedef unsigned int u32; - -typedef signed long long s64; -typedef unsigned long long u64; - -#define BITS_PER_LONG 32 - -#endif - /* * basic definitions used in lmc include files */ @@ -45,9 +26,6 @@ typedef struct lmc___media lmc_media_t; typedef struct lmc___ctl lmc_ctl_t; #define lmc_csrptr_t unsigned long -#define u_int16_t u16 -#define u_int8_t u8 -#define tulip_uint32_t u32 #define LMC_REG_RANGE 0x80 @@ -244,46 +222,8 @@ struct lmc___media { #define STATCHECK 0xBEEFCAFE -/* Included in this structure are first - * - standard net_device_stats - * - some other counters used for debug and driver performance - * evaluation -baz - */ -struct lmc_statistics +struct lmc_extra_statistics { - unsigned long rx_packets; /* total packets received */ - unsigned long tx_packets; /* total packets transmitted */ - unsigned long rx_bytes; - unsigned long tx_bytes; - - unsigned long rx_errors; /* bad packets received */ - unsigned long tx_errors; /* packet transmit problems */ - unsigned long rx_dropped; /* no space in linux buffers */ - unsigned long tx_dropped; /* no space available in linux */ - unsigned long multicast; /* multicast packets received */ - unsigned long collisions; - - /* detailed rx_errors: */ - unsigned long rx_length_errors; - unsigned long rx_over_errors; /* receiver ring buff overflow */ - unsigned long rx_crc_errors; /* recved pkt with crc error */ - unsigned long rx_frame_errors; /* recv'd frame alignment error */ - unsigned long rx_fifo_errors; /* recv'r fifo overrun */ - unsigned long rx_missed_errors; /* receiver missed packet */ - - /* detailed tx_errors */ - unsigned long tx_aborted_errors; - unsigned long tx_carrier_errors; - unsigned long tx_fifo_errors; - unsigned long tx_heartbeat_errors; - unsigned long tx_window_errors; - - /* for cslip etc */ - unsigned long rx_compressed; - unsigned long tx_compressed; - - /* ------------------------------------- - * Custom stats & counters follow -baz */ u_int32_t version_size; u_int32_t lmc_cardtype; @@ -325,27 +265,26 @@ struct lmc_statistics u_int32_t check; }; - typedef struct lmc_xinfo { - u_int32_t Magic0; /* BEEFCAFE */ + u_int32_t Magic0; /* BEEFCAFE */ - u_int32_t PciCardType; - u_int32_t PciSlotNumber; /* PCI slot number */ + u_int32_t PciCardType; + u_int32_t PciSlotNumber; /* PCI slot number */ - u_int16_t DriverMajorVersion; - u_int16_t DriverMinorVersion; - u_int16_t DriverSubVersion; + u16 DriverMajorVersion; + u16 DriverMinorVersion; + u16 DriverSubVersion; - u_int16_t XilinxRevisionNumber; - u_int16_t MaxFrameSize; + u16 XilinxRevisionNumber; + u16 MaxFrameSize; - u_int16_t t1_alarm1_status; - u_int16_t t1_alarm2_status; + u16 t1_alarm1_status; + u16 t1_alarm2_status; - int link_status; - u_int32_t mii_reg16; + int link_status; + u_int32_t mii_reg16; - u_int32_t Magic1; /* DEADBEEF */ + u_int32_t Magic1; /* DEADBEEF */ } LMC_XINFO; @@ -353,11 +292,10 @@ typedef struct lmc_xinfo { * forward decl */ struct lmc___softc { - void *if_ptr; /* General purpose pointer (used by SPPP) */ char *name; u8 board_idx; - struct lmc_statistics stats; - struct net_device *lmc_device; + struct lmc_extra_statistics extra_stats; + struct net_device *lmc_device; int hang, rxdesc, bad_packet, some_counter; u_int32_t txgo; @@ -381,7 +319,7 @@ struct lmc___softc { unsigned int lmc_taint_tx, lmc_taint_rx; int lmc_tx_start, lmc_txfull; int lmc_txbusy; - u_int16_t lmc_miireg16; + u16 lmc_miireg16; int lmc_ok; int last_link_status; int lmc_cardtype; @@ -408,8 +346,7 @@ struct lmc___softc { u32 num_int; spinlock_t lmc_lock; - u_int16_t if_type; /* PPP or NET */ - struct ppp_device *pd; + u16 if_type; /* HDLC/PPP or NET */ /* Failure cases */ u8 failed_ring; @@ -525,46 +462,9 @@ struct lmc___softc { #define LMC_ADAP_SSI 4 #define LMC_ADAP_T1 5 -#define HDLC_HDR_LEN 4 -#define HDLC_ADDR_LEN 1 -#define HDLC_SLARP 0x8035 #define LMC_MTU 1500 -#define SLARP_LINECHECK 2 #define LMC_CRC_LEN_16 2 /* 16-bit CRC */ #define LMC_CRC_LEN_32 4 -#ifdef LMC_HDLC -/* definition of an hdlc header. */ -struct hdlc_hdr -{ - u8 address; - u8 control; - u16 type; -}; - -/* definition of a slarp header. */ -struct slarp -{ - long code; - union sl - { - struct - { - ulong address; - ulong mask; - ushort unused; - } add; - struct - { - ulong mysequence; - ulong yoursequence; - ushort reliability; - ulong time; - } chk; - } t; -}; -#endif /* LMC_HDLC */ - - #endif /* _LMC_VAR_H_ */ -- GitLab From d507911c3a451986b3501417c78b568f3850b8ef Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Wed, 2 Jul 2008 20:55:58 +0200 Subject: [PATCH 0096/1024] WAN: don't mention syncppp in z8530 DocBook. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- Documentation/DocBook/z8530book.tmpl | 38 +++++++++------------------- 1 file changed, 12 insertions(+), 26 deletions(-) diff --git a/Documentation/DocBook/z8530book.tmpl b/Documentation/DocBook/z8530book.tmpl index 42c75ba71ba..a42a8a4c768 100644 --- a/Documentation/DocBook/z8530book.tmpl +++ b/Documentation/DocBook/z8530book.tmpl @@ -69,12 +69,6 @@ device to be used as both a tty interface and as a synchronous controller is a project for Linux post the 2.4 release - - The support code handles most common card configurations and - supports running both Cisco HDLC and Synchronous PPP. With extra - glue the frame relay and X.25 protocols can also be used with this - driver. - @@ -179,35 +173,27 @@ If you wish to use the network interface facilities of the driver, then you need to attach a network device to each channel that is - present and in use. In addition to use the SyncPPP and Cisco HDLC + present and in use. In addition to use the generic HDLC you need to follow some additional plumbing rules. They may seem complex but a look at the example hostess_sv11 driver should reassure you. The network device used for each channel should be pointed to by - the netdevice field of each channel. The dev-> priv field of the + the netdevice field of each channel. The hdlc-> priv field of the network device points to your private data - you will need to be - able to find your ppp device from this. In addition to use the - sync ppp layer the private data must start with a void * pointer - to the syncppp structures. + able to find your private data from this. The way most drivers approach this particular problem is to create a structure holding the Z8530 device definition and - put that and the syncppp pointer into the private field of - the network device. The network device fields of the channels - then point back to the network devices. The ppp_device can also - be put in the private structure conveniently. + put that into the private field of the network device. The + network device fields of the channels then point back to the + network devices. - If you wish to use the synchronous ppp then you need to attach - the syncppp layer to the network device. You should do this before - you register the network device. The - sppp_attach requires that the first void * - pointer in your private data is pointing to an empty struct - ppp_device. The function fills in the initial data for the - ppp/hdlc layer. + If you wish to use the generic HDLC then you need to register + the HDLC device. Before you register your network device you will also need to @@ -314,10 +300,10 @@ buffer in sk_buff format and queues it for transmission. The caller must provide the entire packet with the exception of the bitstuffing and CRC. This is normally done by the caller via - the syncppp interface layer. It returns 0 if the buffer has been - queued and non zero values for queue full. If the function accepts - the buffer it becomes property of the Z8530 layer and the caller - should not free it. + the generic HDLC interface layer. It returns 0 if the buffer has been + queued and non zero values for queue full. If the function accepts + the buffer it becomes property of the Z8530 layer and the caller + should not free it. The function z8530_get_stats returns a pointer -- GitLab From 867240f7b2a37b1be4ba37d904a9064a96c82099 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Thu, 3 Jul 2008 00:39:46 +0200 Subject: [PATCH 0097/1024] WAN: Use u32 type instead of u_int32_t in LMC driver. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/wan/lmc/lmc.h | 11 +- drivers/net/wan/lmc/lmc_debug.c | 7 +- drivers/net/wan/lmc/lmc_debug.h | 6 +- drivers/net/wan/lmc/lmc_main.c | 15 +- drivers/net/wan/lmc/lmc_media.c | 9 +- drivers/net/wan/lmc/lmc_var.h | 234 ++++++++++++++++---------------- 6 files changed, 139 insertions(+), 143 deletions(-) diff --git a/drivers/net/wan/lmc/lmc.h b/drivers/net/wan/lmc/lmc.h index 882e58c1bfd..4ced7ac16c2 100644 --- a/drivers/net/wan/lmc/lmc.h +++ b/drivers/net/wan/lmc/lmc.h @@ -11,12 +11,12 @@ unsigned lmc_mii_readreg(lmc_softc_t * const sc, unsigned devaddr, unsigned regno); void lmc_mii_writereg(lmc_softc_t * const sc, unsigned devaddr, unsigned regno, unsigned data); -void lmc_led_on(lmc_softc_t * const, u_int32_t); -void lmc_led_off(lmc_softc_t * const, u_int32_t); +void lmc_led_on(lmc_softc_t * const, u32); +void lmc_led_off(lmc_softc_t * const, u32); unsigned lmc_mii_readreg(lmc_softc_t * const, unsigned, unsigned); void lmc_mii_writereg(lmc_softc_t * const, unsigned, unsigned, unsigned); -void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits); -void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits); +void lmc_gpio_mkinput(lmc_softc_t * const sc, u32 bits); +void lmc_gpio_mkoutput(lmc_softc_t * const sc, u32 bits); int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); @@ -26,8 +26,7 @@ extern lmc_media_t lmc_t1_media; extern lmc_media_t lmc_hssi_media; #ifdef _DBG_EVENTLOG -static void lmcEventLog( u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3 ); +static void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3); #endif #endif - diff --git a/drivers/net/wan/lmc/lmc_debug.c b/drivers/net/wan/lmc/lmc_debug.c index 3b94352b0d0..15049d711f4 100644 --- a/drivers/net/wan/lmc/lmc_debug.c +++ b/drivers/net/wan/lmc/lmc_debug.c @@ -1,4 +1,3 @@ - #include #include #include @@ -48,10 +47,10 @@ void lmcConsoleLog(char *type, unsigned char *ucData, int iLen) #endif #ifdef DEBUG -u_int32_t lmcEventLogIndex = 0; -u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS]; +u32 lmcEventLogIndex; +u32 lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS]; -void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3) +void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3) { lmcEventLogBuf[lmcEventLogIndex++] = EventNum; lmcEventLogBuf[lmcEventLogIndex++] = arg2; diff --git a/drivers/net/wan/lmc/lmc_debug.h b/drivers/net/wan/lmc/lmc_debug.h index cf3563859bf..2d46f121549 100644 --- a/drivers/net/wan/lmc/lmc_debug.h +++ b/drivers/net/wan/lmc/lmc_debug.h @@ -38,15 +38,15 @@ #ifdef DEBUG -extern u_int32_t lmcEventLogIndex; -extern u_int32_t lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS]; +extern u32 lmcEventLogIndex; +extern u32 lmcEventLogBuf[LMC_EVENTLOGSIZE * LMC_EVENTLOGARGS]; #define LMC_EVENT_LOG(x, y, z) lmcEventLog((x), (y), (z)) #else #define LMC_EVENT_LOG(x,y,z) #endif /* end ifdef _DBG_EVENTLOG */ void lmcConsoleLog(char *type, unsigned char *ucData, int iLen); -void lmcEventLog (u_int32_t EventNum, u_int32_t arg2, u_int32_t arg3); +void lmcEventLog(u32 EventNum, u32 arg2, u32 arg3); void lmc_trace(struct net_device *dev, char *msg); #endif diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index f64f4ca80b5..f80640f5a74 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -310,7 +310,8 @@ int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/ ret = -EFAULT; break; } - if (copy_to_user(ifr->ifr_data + sizeof (u32), lmcEventLogBuf, sizeof (lmcEventLogBuf))) + if (copy_to_user(ifr->ifr_data + sizeof(u32), lmcEventLogBuf, + sizeof(lmcEventLogBuf))) ret = -EFAULT; else ret = 0; @@ -624,7 +625,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/ struct net_device *dev = (struct net_device *)data; lmc_softc_t *sc = dev_to_sc(dev); int link_status; - u_int32_t ticks; + u32 ticks; unsigned long flags; lmc_trace(dev, "lmc_watchdog in"); @@ -1899,7 +1900,7 @@ static void lmc_softreset (lmc_softc_t * const sc) /*fold00*/ lmc_trace(sc->lmc_device, "lmc_softreset out"); } -void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/ +void lmc_gpio_mkinput(lmc_softc_t * const sc, u32 bits) /*fold00*/ { lmc_trace(sc->lmc_device, "lmc_gpio_mkinput in"); sc->lmc_gpio_io &= ~bits; @@ -1907,7 +1908,7 @@ void lmc_gpio_mkinput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/ lmc_trace(sc->lmc_device, "lmc_gpio_mkinput out"); } -void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/ +void lmc_gpio_mkoutput(lmc_softc_t * const sc, u32 bits) /*fold00*/ { lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput in"); sc->lmc_gpio_io |= bits; @@ -1915,7 +1916,7 @@ void lmc_gpio_mkoutput(lmc_softc_t * const sc, u_int32_t bits) /*fold00*/ lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput out"); } -void lmc_led_on(lmc_softc_t * const sc, u_int32_t led) /*fold00*/ +void lmc_led_on(lmc_softc_t * const sc, u32 led) /*fold00*/ { lmc_trace(sc->lmc_device, "lmc_led_on in"); if((~sc->lmc_miireg16) & led){ /* Already on! */ @@ -1928,7 +1929,7 @@ void lmc_led_on(lmc_softc_t * const sc, u_int32_t led) /*fold00*/ lmc_trace(sc->lmc_device, "lmc_led_on out"); } -void lmc_led_off(lmc_softc_t * const sc, u_int32_t led) /*fold00*/ +void lmc_led_off(lmc_softc_t * const sc, u32 led) /*fold00*/ { lmc_trace(sc->lmc_device, "lmc_led_off in"); if(sc->lmc_miireg16 & led){ /* Already set don't do anything */ @@ -1984,7 +1985,7 @@ static void lmc_reset(lmc_softc_t * const sc) /*fold00*/ static void lmc_dec_reset(lmc_softc_t * const sc) /*fold00*/ { - u_int32_t val; + u32 val; lmc_trace(sc->lmc_device, "lmc_dec_reset in"); /* diff --git a/drivers/net/wan/lmc/lmc_media.c b/drivers/net/wan/lmc/lmc_media.c index 2e0711a956c..f327674fc93 100644 --- a/drivers/net/wan/lmc/lmc_media.c +++ b/drivers/net/wan/lmc/lmc_media.c @@ -93,8 +93,7 @@ static void lmc_dummy_set_1 (lmc_softc_t * const, int); static void lmc_dummy_set2_1 (lmc_softc_t * const, lmc_ctl_t *); static inline void write_av9110_bit (lmc_softc_t *, int); -static void write_av9110 (lmc_softc_t *, u_int32_t, u_int32_t, u_int32_t, - u_int32_t, u_int32_t); +static void write_av9110(lmc_softc_t *, u32, u32, u32, u32, u32); lmc_media_t lmc_ds3_media = { lmc_ds3_init, /* special media init stuff */ @@ -679,7 +678,7 @@ static int lmc_ssi_get_link_status (lmc_softc_t * const sc) { u16 link_status; - u_int32_t ticks; + u32 ticks; int ret = 1; int hw_hdsk = 1; @@ -835,9 +834,7 @@ write_av9110_bit (lmc_softc_t * sc, int c) LMC_CSR_WRITE (sc, csr_gp, sc->lmc_gpio); } -static void -write_av9110 (lmc_softc_t * sc, u_int32_t n, u_int32_t m, u_int32_t v, - u_int32_t x, u_int32_t r) +static void write_av9110(lmc_softc_t *sc, u32 n, u32 m, u32 v, u32 x, u32 r) { int i; diff --git a/drivers/net/wan/lmc/lmc_var.h b/drivers/net/wan/lmc/lmc_var.h index 52e044209d5..65d01978e78 100644 --- a/drivers/net/wan/lmc/lmc_var.h +++ b/drivers/net/wan/lmc/lmc_var.h @@ -100,45 +100,45 @@ struct lmc_regfile_t { * used to define bits in the second tulip_desc_t field (length) * for the transmit descriptor -baz */ -#define LMC_TDES_FIRST_BUFFER_SIZE ((u_int32_t)(0x000007FF)) -#define LMC_TDES_SECOND_BUFFER_SIZE ((u_int32_t)(0x003FF800)) -#define LMC_TDES_HASH_FILTERING ((u_int32_t)(0x00400000)) -#define LMC_TDES_DISABLE_PADDING ((u_int32_t)(0x00800000)) -#define LMC_TDES_SECOND_ADDR_CHAINED ((u_int32_t)(0x01000000)) -#define LMC_TDES_END_OF_RING ((u_int32_t)(0x02000000)) -#define LMC_TDES_ADD_CRC_DISABLE ((u_int32_t)(0x04000000)) -#define LMC_TDES_SETUP_PACKET ((u_int32_t)(0x08000000)) -#define LMC_TDES_INVERSE_FILTERING ((u_int32_t)(0x10000000)) -#define LMC_TDES_FIRST_SEGMENT ((u_int32_t)(0x20000000)) -#define LMC_TDES_LAST_SEGMENT ((u_int32_t)(0x40000000)) -#define LMC_TDES_INTERRUPT_ON_COMPLETION ((u_int32_t)(0x80000000)) +#define LMC_TDES_FIRST_BUFFER_SIZE ((u32)(0x000007FF)) +#define LMC_TDES_SECOND_BUFFER_SIZE ((u32)(0x003FF800)) +#define LMC_TDES_HASH_FILTERING ((u32)(0x00400000)) +#define LMC_TDES_DISABLE_PADDING ((u32)(0x00800000)) +#define LMC_TDES_SECOND_ADDR_CHAINED ((u32)(0x01000000)) +#define LMC_TDES_END_OF_RING ((u32)(0x02000000)) +#define LMC_TDES_ADD_CRC_DISABLE ((u32)(0x04000000)) +#define LMC_TDES_SETUP_PACKET ((u32)(0x08000000)) +#define LMC_TDES_INVERSE_FILTERING ((u32)(0x10000000)) +#define LMC_TDES_FIRST_SEGMENT ((u32)(0x20000000)) +#define LMC_TDES_LAST_SEGMENT ((u32)(0x40000000)) +#define LMC_TDES_INTERRUPT_ON_COMPLETION ((u32)(0x80000000)) #define TDES_SECOND_BUFFER_SIZE_BIT_NUMBER 11 #define TDES_COLLISION_COUNT_BIT_NUMBER 3 /* Constants for the RCV descriptor RDES */ -#define LMC_RDES_OVERFLOW ((u_int32_t)(0x00000001)) -#define LMC_RDES_CRC_ERROR ((u_int32_t)(0x00000002)) -#define LMC_RDES_DRIBBLING_BIT ((u_int32_t)(0x00000004)) -#define LMC_RDES_REPORT_ON_MII_ERR ((u_int32_t)(0x00000008)) -#define LMC_RDES_RCV_WATCHDOG_TIMEOUT ((u_int32_t)(0x00000010)) -#define LMC_RDES_FRAME_TYPE ((u_int32_t)(0x00000020)) -#define LMC_RDES_COLLISION_SEEN ((u_int32_t)(0x00000040)) -#define LMC_RDES_FRAME_TOO_LONG ((u_int32_t)(0x00000080)) -#define LMC_RDES_LAST_DESCRIPTOR ((u_int32_t)(0x00000100)) -#define LMC_RDES_FIRST_DESCRIPTOR ((u_int32_t)(0x00000200)) -#define LMC_RDES_MULTICAST_FRAME ((u_int32_t)(0x00000400)) -#define LMC_RDES_RUNT_FRAME ((u_int32_t)(0x00000800)) -#define LMC_RDES_DATA_TYPE ((u_int32_t)(0x00003000)) -#define LMC_RDES_LENGTH_ERROR ((u_int32_t)(0x00004000)) -#define LMC_RDES_ERROR_SUMMARY ((u_int32_t)(0x00008000)) -#define LMC_RDES_FRAME_LENGTH ((u_int32_t)(0x3FFF0000)) -#define LMC_RDES_OWN_BIT ((u_int32_t)(0x80000000)) +#define LMC_RDES_OVERFLOW ((u32)(0x00000001)) +#define LMC_RDES_CRC_ERROR ((u32)(0x00000002)) +#define LMC_RDES_DRIBBLING_BIT ((u32)(0x00000004)) +#define LMC_RDES_REPORT_ON_MII_ERR ((u32)(0x00000008)) +#define LMC_RDES_RCV_WATCHDOG_TIMEOUT ((u32)(0x00000010)) +#define LMC_RDES_FRAME_TYPE ((u32)(0x00000020)) +#define LMC_RDES_COLLISION_SEEN ((u32)(0x00000040)) +#define LMC_RDES_FRAME_TOO_LONG ((u32)(0x00000080)) +#define LMC_RDES_LAST_DESCRIPTOR ((u32)(0x00000100)) +#define LMC_RDES_FIRST_DESCRIPTOR ((u32)(0x00000200)) +#define LMC_RDES_MULTICAST_FRAME ((u32)(0x00000400)) +#define LMC_RDES_RUNT_FRAME ((u32)(0x00000800)) +#define LMC_RDES_DATA_TYPE ((u32)(0x00003000)) +#define LMC_RDES_LENGTH_ERROR ((u32)(0x00004000)) +#define LMC_RDES_ERROR_SUMMARY ((u32)(0x00008000)) +#define LMC_RDES_FRAME_LENGTH ((u32)(0x3FFF0000)) +#define LMC_RDES_OWN_BIT ((u32)(0x80000000)) #define RDES_FRAME_LENGTH_BIT_NUMBER 16 -#define LMC_RDES_ERROR_MASK ( (u_int32_t)( \ +#define LMC_RDES_ERROR_MASK ( (u32)( \ LMC_RDES_OVERFLOW \ | LMC_RDES_DRIBBLING_BIT \ | LMC_RDES_REPORT_ON_MII_ERR \ @@ -150,32 +150,32 @@ struct lmc_regfile_t { */ typedef struct { - u_int32_t n; - u_int32_t m; - u_int32_t v; - u_int32_t x; - u_int32_t r; - u_int32_t f; - u_int32_t exact; + u32 n; + u32 m; + u32 v; + u32 x; + u32 r; + u32 f; + u32 exact; } lmc_av9110_t; /* * Common structure passed to the ioctl code. */ struct lmc___ctl { - u_int32_t cardtype; - u_int32_t clock_source; /* HSSI, T1 */ - u_int32_t clock_rate; /* T1 */ - u_int32_t crc_length; - u_int32_t cable_length; /* DS3 */ - u_int32_t scrambler_onoff; /* DS3 */ - u_int32_t cable_type; /* T1 */ - u_int32_t keepalive_onoff; /* protocol */ - u_int32_t ticks; /* ticks/sec */ + u32 cardtype; + u32 clock_source; /* HSSI, T1 */ + u32 clock_rate; /* T1 */ + u32 crc_length; + u32 cable_length; /* DS3 */ + u32 scrambler_onoff; /* DS3 */ + u32 cable_type; /* T1 */ + u32 keepalive_onoff; /* protocol */ + u32 ticks; /* ticks/sec */ union { lmc_av9110_t ssi; } cardspec; - u_int32_t circuit_type; /* T1 or E1 */ + u32 circuit_type; /* T1 or E1 */ }; @@ -224,52 +224,52 @@ struct lmc___media { struct lmc_extra_statistics { - u_int32_t version_size; - u_int32_t lmc_cardtype; - - u_int32_t tx_ProcTimeout; - u_int32_t tx_IntTimeout; - u_int32_t tx_NoCompleteCnt; - u_int32_t tx_MaxXmtsB4Int; - u_int32_t tx_TimeoutCnt; - u_int32_t tx_OutOfSyncPtr; - u_int32_t tx_tbusy0; - u_int32_t tx_tbusy1; - u_int32_t tx_tbusy_calls; - u_int32_t resetCount; - u_int32_t lmc_txfull; - u_int32_t tbusy; - u_int32_t dirtyTx; - u_int32_t lmc_next_tx; - u_int32_t otherTypeCnt; - u_int32_t lastType; - u_int32_t lastTypeOK; - u_int32_t txLoopCnt; - u_int32_t usedXmtDescripCnt; - u_int32_t txIndexCnt; - u_int32_t rxIntLoopCnt; - - u_int32_t rx_SmallPktCnt; - u_int32_t rx_BadPktSurgeCnt; - u_int32_t rx_BuffAllocErr; - u_int32_t tx_lossOfClockCnt; - - /* T1 error counters */ - u_int32_t framingBitErrorCount; - u_int32_t lineCodeViolationCount; - - u_int32_t lossOfFrameCount; - u_int32_t changeOfFrameAlignmentCount; - u_int32_t severelyErroredFrameCount; - - u_int32_t check; + u32 version_size; + u32 lmc_cardtype; + + u32 tx_ProcTimeout; + u32 tx_IntTimeout; + u32 tx_NoCompleteCnt; + u32 tx_MaxXmtsB4Int; + u32 tx_TimeoutCnt; + u32 tx_OutOfSyncPtr; + u32 tx_tbusy0; + u32 tx_tbusy1; + u32 tx_tbusy_calls; + u32 resetCount; + u32 lmc_txfull; + u32 tbusy; + u32 dirtyTx; + u32 lmc_next_tx; + u32 otherTypeCnt; + u32 lastType; + u32 lastTypeOK; + u32 txLoopCnt; + u32 usedXmtDescripCnt; + u32 txIndexCnt; + u32 rxIntLoopCnt; + + u32 rx_SmallPktCnt; + u32 rx_BadPktSurgeCnt; + u32 rx_BuffAllocErr; + u32 tx_lossOfClockCnt; + + /* T1 error counters */ + u32 framingBitErrorCount; + u32 lineCodeViolationCount; + + u32 lossOfFrameCount; + u32 changeOfFrameAlignmentCount; + u32 severelyErroredFrameCount; + + u32 check; }; typedef struct lmc_xinfo { - u_int32_t Magic0; /* BEEFCAFE */ + u32 Magic0; /* BEEFCAFE */ - u_int32_t PciCardType; - u_int32_t PciSlotNumber; /* PCI slot number */ + u32 PciCardType; + u32 PciSlotNumber; /* PCI slot number */ u16 DriverMajorVersion; u16 DriverMinorVersion; @@ -282,9 +282,9 @@ typedef struct lmc_xinfo { u16 t1_alarm2_status; int link_status; - u_int32_t mii_reg16; + u32 mii_reg16; - u_int32_t Magic1; /* DEADBEEF */ + u32 Magic1; /* DEADBEEF */ } LMC_XINFO; @@ -298,16 +298,16 @@ struct lmc___softc { struct net_device *lmc_device; int hang, rxdesc, bad_packet, some_counter; - u_int32_t txgo; + u32 txgo; struct lmc_regfile_t lmc_csrs; - volatile u_int32_t lmc_txtick; - volatile u_int32_t lmc_rxtick; - u_int32_t lmc_flags; - u_int32_t lmc_intrmask; /* our copy of csr_intr */ - u_int32_t lmc_cmdmode; /* our copy of csr_cmdmode */ - u_int32_t lmc_busmode; /* our copy of csr_busmode */ - u_int32_t lmc_gpio_io; /* state of in/out settings */ - u_int32_t lmc_gpio; /* state of outputs */ + volatile u32 lmc_txtick; + volatile u32 lmc_rxtick; + u32 lmc_flags; + u32 lmc_intrmask; /* our copy of csr_intr */ + u32 lmc_cmdmode; /* our copy of csr_cmdmode */ + u32 lmc_busmode; /* our copy of csr_busmode */ + u32 lmc_gpio_io; /* state of in/out settings */ + u32 lmc_gpio; /* state of outputs */ struct sk_buff* lmc_txq[LMC_TXDESCS]; struct sk_buff* lmc_rxq[LMC_RXDESCS]; volatile @@ -323,37 +323,37 @@ struct lmc___softc { int lmc_ok; int last_link_status; int lmc_cardtype; - u_int32_t last_frameerr; + u32 last_frameerr; lmc_media_t *lmc_media; struct timer_list timer; lmc_ctl_t ictl; - u_int32_t TxDescriptControlInit; + u32 TxDescriptControlInit; int tx_TimeoutInd; /* additional driver state */ int tx_TimeoutDisplay; unsigned int lastlmc_taint_tx; int lasttx_packets; - u_int32_t tx_clockState; - u_int32_t lmc_crcSize; - LMC_XINFO lmc_xinfo; + u32 tx_clockState; + u32 lmc_crcSize; + LMC_XINFO lmc_xinfo; char lmc_yel, lmc_blue, lmc_red; /* for T1 and DS3 */ - char lmc_timing; /* for HSSI and SSI */ - int got_irq; + char lmc_timing; /* for HSSI and SSI */ + int got_irq; - char last_led_err[4]; + char last_led_err[4]; - u32 last_int; - u32 num_int; + u32 last_int; + u32 num_int; spinlock_t lmc_lock; u16 if_type; /* HDLC/PPP or NET */ - /* Failure cases */ - u8 failed_ring; - u8 failed_recv_alloc; + /* Failure cases */ + u8 failed_ring; + u8 failed_recv_alloc; - /* Structure check */ - u32 check; + /* Structure check */ + u32 check; }; #define LMC_PCI_TIME 1 @@ -449,8 +449,8 @@ struct lmc___softc { | TULIP_STS_TXUNDERFLOW\ | TULIP_STS_RXSTOPPED ) -#define DESC_OWNED_BY_SYSTEM ((u_int32_t)(0x00000000)) -#define DESC_OWNED_BY_DC21X4 ((u_int32_t)(0x80000000)) +#define DESC_OWNED_BY_SYSTEM ((u32)(0x00000000)) +#define DESC_OWNED_BY_DC21X4 ((u32)(0x80000000)) #ifndef TULIP_CMD_RECEIVEALL #define TULIP_CMD_RECEIVEALL 0x40000000L -- GitLab From 8fa89bf5de066b11190ac804903021700c2b1185 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 14 Jul 2008 22:56:55 +0200 Subject: [PATCH 0098/1024] mv643xx_eth: fix TX hang erratum workaround The previously merged TX hang erratum workaround ("mv643xx_eth: work around TX hang hardware issue") assumes that TX_END interrupts are delivered simultaneously with or after their corresponding TX interrupts, but this is not always true in practise. In particular, it appears that TX_END interrupts are issued as soon as descriptor fetch returns an invalid descriptor, which may happen before earlier descriptors have been fully transmitted and written back to memory as being done. This hardware behavior can lead to a situation where the current driver code mistakenly assumes that the MAC has given up transmitting before noticing the packets that it is in fact still currently working on, causing the driver to re-kick the transmit queue, which will only cause the MAC to re-fetch the invalid head descriptor, and generate another TX_END interrupt, et cetera, until the packets in the pipe finally finish transmitting and have their descriptors written back to memory, which will then finally break the loop. Fix this by having the erratum workaround not check the 'number of unfinished descriptor', but instead, to compare the software's idea of what the head descriptor pointer should be to the hardware's head descriptor pointer (which is updated on the same conditions as the TX_END interupt is generated on, i.e. possibly before all previous descriptors have been transmitted and written back). Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 41 +++++++++++++++++++++++++++------------ 1 file changed, 29 insertions(+), 12 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 8a97a0066a8..910920e2125 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -96,6 +96,7 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define TX_BW_MTU(p) (0x0458 + ((p) << 10)) #define TX_BW_BURST(p) (0x045c + ((p) << 10)) #define INT_CAUSE(p) (0x0460 + ((p) << 10)) +#define INT_TX_END_0 0x00080000 #define INT_TX_END 0x07f80000 #define INT_RX 0x0007fbfc #define INT_EXT 0x00000002 @@ -706,6 +707,7 @@ static inline __be16 sum16_as_be(__sum16 sum) static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb) { + struct mv643xx_eth_private *mp = txq_to_mp(txq); int nr_frags = skb_shinfo(skb)->nr_frags; int tx_index; struct tx_desc *desc; @@ -759,6 +761,10 @@ static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb) wmb(); desc->cmd_sts = cmd_sts; + /* clear TX_END interrupt status */ + wrl(mp, INT_CAUSE(mp->port_num), ~(INT_TX_END_0 << txq->index)); + rdl(mp, INT_CAUSE(mp->port_num)); + /* ensure all descriptors are written before poking hardware */ wmb(); txq_enable(txq); @@ -1684,7 +1690,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) struct mv643xx_eth_private *mp = netdev_priv(dev); u32 int_cause; u32 int_cause_ext; - u32 txq_active; int_cause = rdl(mp, INT_CAUSE(mp->port_num)) & (INT_TX_END | INT_RX | INT_EXT); @@ -1743,8 +1748,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) } #endif - txq_active = rdl(mp, TXQ_COMMAND(mp->port_num)); - /* * TxBuffer or TxError set for any of the 8 queues? */ @@ -1754,6 +1757,14 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) for (i = 0; i < 8; i++) if (mp->txq_mask & (1 << i)) txq_reclaim(mp->txq + i, 0); + + /* + * Enough space again in the primary TX queue for a + * full packet? + */ + spin_lock(&mp->lock); + __txq_maybe_wake(mp->txq + mp->txq_primary); + spin_unlock(&mp->lock); } /* @@ -1763,19 +1774,25 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) int i; wrl(mp, INT_CAUSE(mp->port_num), ~(int_cause & INT_TX_END)); + + spin_lock(&mp->lock); for (i = 0; i < 8; i++) { struct tx_queue *txq = mp->txq + i; - if (txq->tx_desc_count && !((txq_active >> i) & 1)) + u32 hw_desc_ptr; + u32 expected_ptr; + + if ((int_cause & (INT_TX_END_0 << i)) == 0) + continue; + + hw_desc_ptr = + rdl(mp, TXQ_CURRENT_DESC_PTR(mp->port_num, i)); + expected_ptr = (u32)txq->tx_desc_dma + + txq->tx_curr_desc * sizeof(struct tx_desc); + + if (hw_desc_ptr != expected_ptr) txq_enable(txq); } - } - - /* - * Enough space again in the primary TX queue for a full packet? - */ - if (int_cause_ext & INT_EXT_TX) { - struct tx_queue *txq = mp->txq + mp->txq_primary; - __txq_maybe_wake(txq); + spin_unlock(&mp->lock); } return IRQ_HANDLED; -- GitLab From 6b368f6859c80343e5d7c6e2a7c49df0a8a273c1 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 11 Jul 2008 19:38:34 +0200 Subject: [PATCH 0099/1024] mv643xx_eth: prevent breakage when link goes down during transmit When the ethernet link goes down while mv643xx_eth is transmitting data, transmit DMA can stop before all queued transmit descriptors have been processed. But even the descriptors that _have_ been processed might not be properly marked as done before the transmit DMA unit shuts down. Then when the link comes up again, the hardware transmit pointer might have advanced while not all previous packet descriptors have been marked as transmitted, causing software transmit reclaim to hang waiting for the hardware to finish transmitting a descriptor that it has already skipped. This patch forcibly reclaims all packets on the transmit ring on a link down interrupt, and then resyncs the hardware transmit pointer to what the software's idea of the first free descriptor is. Also, we need to prevent re-waking the transmit queue if we get a 'transmit done' interrupt at the same time as a 'link down' interrupt, which this patch does as well. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 57 ++++++++++++++++++++++++++------------- 1 file changed, 38 insertions(+), 19 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 910920e2125..d7620c50efb 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -405,6 +405,17 @@ static void rxq_disable(struct rx_queue *rxq) udelay(10); } +static void txq_reset_hw_ptr(struct tx_queue *txq) +{ + struct mv643xx_eth_private *mp = txq_to_mp(txq); + int off = TXQ_CURRENT_DESC_PTR(mp->port_num, txq->index); + u32 addr; + + addr = (u32)txq->tx_desc_dma; + addr += txq->tx_curr_desc * sizeof(struct tx_desc); + wrl(mp, off, addr); +} + static void txq_enable(struct tx_queue *txq) { struct mv643xx_eth_private *mp = txq_to_mp(txq); @@ -1545,8 +1556,11 @@ static int txq_init(struct mv643xx_eth_private *mp, int index) tx_desc = (struct tx_desc *)txq->tx_desc_area; for (i = 0; i < txq->tx_ring_size; i++) { + struct tx_desc *txd = tx_desc + i; int nexti = (i + 1) % txq->tx_ring_size; - tx_desc[i].next_desc_ptr = txq->tx_desc_dma + + + txd->cmd_sts = 0; + txd->next_desc_ptr = txq->tx_desc_dma + nexti * sizeof(struct tx_desc); } @@ -1583,8 +1597,11 @@ static void txq_reclaim(struct tx_queue *txq, int force) desc = &txq->tx_desc_area[tx_index]; cmd_sts = desc->cmd_sts; - if (!force && (cmd_sts & BUFFER_OWNED_BY_DMA)) - break; + if (cmd_sts & BUFFER_OWNED_BY_DMA) { + if (!force) + break; + desc->cmd_sts = cmd_sts & ~BUFFER_OWNED_BY_DMA; + } txq->tx_used_desc = (tx_index + 1) % txq->tx_ring_size; txq->tx_desc_count--; @@ -1705,8 +1722,6 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) { if (mp->phy_addr == -1 || mii_link_ok(&mp->mii)) { - int i; - if (mp->phy_addr != -1) { struct ethtool_cmd cmd; @@ -1714,17 +1729,24 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) update_pscr(mp, cmd.speed, cmd.duplex); } - for (i = 0; i < 8; i++) - if (mp->txq_mask & (1 << i)) - txq_enable(mp->txq + i); - if (!netif_carrier_ok(dev)) { netif_carrier_on(dev); - __txq_maybe_wake(mp->txq + mp->txq_primary); + netif_wake_queue(dev); } } else if (netif_carrier_ok(dev)) { + int i; + netif_stop_queue(dev); netif_carrier_off(dev); + + for (i = 0; i < 8; i++) { + struct tx_queue *txq = mp->txq + i; + + if (mp->txq_mask & (1 << i)) { + txq_reclaim(txq, 1); + txq_reset_hw_ptr(txq); + } + } } } @@ -1762,9 +1784,11 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) * Enough space again in the primary TX queue for a * full packet? */ - spin_lock(&mp->lock); - __txq_maybe_wake(mp->txq + mp->txq_primary); - spin_unlock(&mp->lock); + if (netif_carrier_ok(dev)) { + spin_lock(&mp->lock); + __txq_maybe_wake(mp->txq + mp->txq_primary); + spin_unlock(&mp->lock); + } } /* @@ -1851,16 +1875,11 @@ static void port_start(struct mv643xx_eth_private *mp) tx_set_rate(mp, 1000000000, 16777216); for (i = 0; i < 8; i++) { struct tx_queue *txq = mp->txq + i; - int off = TXQ_CURRENT_DESC_PTR(mp->port_num, i); - u32 addr; if ((mp->txq_mask & (1 << i)) == 0) continue; - addr = (u32)txq->tx_desc_dma; - addr += txq->tx_curr_desc * sizeof(struct tx_desc); - wrl(mp, off, addr); - + txq_reset_hw_ptr(txq); txq_set_rate(txq, 1000000000, 16777216); txq_set_fixed_prio_mode(txq); } -- GitLab From 4dfc1c87af46f9d8abf2ef78a4e22891d7a564c3 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 13:34:51 +0200 Subject: [PATCH 0100/1024] mv643xx_eth: fix transmit-reclaim-in-napi-poll The mv643xx_eth driver allows doing transmit reclaim from within the napi poll routine, but after doing reclaim, it would forget to check the free transmit descriptor count and wake up the transmit queue if the reclaim caused enough descriptors for a new packet to become available. This would cause the netdev watchdog to occasionally kick in during certain workloads with combined receive and transmit traffic. Fix this by adding a wakeup check identical to the one in the interrupt handler to the napi poll routine. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index d7620c50efb..3211369a432 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -626,6 +626,12 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) for (i = 0; i < 8; i++) if (mp->txq_mask & (1 << i)) txq_reclaim(mp->txq + i, 0); + + if (netif_carrier_ok(mp->dev)) { + spin_lock(&mp->lock); + __txq_maybe_wake(mp->txq + mp->txq_primary); + spin_unlock(&mp->lock); + } } #endif -- GitLab From 65193a91fc60fdb79e392c9842c10552a1fa3e1c Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Fri, 11 Jul 2008 00:39:41 +0200 Subject: [PATCH 0101/1024] mv643xx_eth: don't fiddle with maximum receive packet size setting The maximum receive packet size field in the Port Serial Control register controls at what size received packets are flagged overlength in the receive descriptor, but it doesn't prevent overlength packets from being DMAd to memory and signaled to the host like other received packets. mv643xx_eth does not support receiving jumbo frames in 10/100 mode, but setting the packet threshold to larger than 1522 bytes in 10/100 mode won't cause breakage by itself. If we really want to enforce maximum packet size on the receiving end instead of on the sending end where it should be done, we can always just add a length check to the software receive handler instead of relying on the hardware to do the comparison for us. What's more, changing the maximum packet size field requires temporarily disabling the RX/TX paths. So once the link comes up in 10/100 Mb/s mode or 1000 Mb/s mode, we'd have to disable it again just to set the right maximum packet size field (1522 in 10/100 Mb/s mode or 9700 in 1000 Mb/s mode), just so that we can offload one comparison operation to hardware that we might as well do in software, assuming that we'd want to do it at all. Contrary to what the documentation suggests, there is no harm in just setting a 9700 byte maximum packet size in 10/100 mode, so use the maximum maximum packet size for all modes. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 3211369a432..207d4391a6d 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -154,7 +154,6 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define SET_MII_SPEED_TO_100 (1 << 24) #define SET_GMII_SPEED_TO_1000 (1 << 23) #define SET_FULL_DUPLEX_MODE (1 << 21) -#define MAX_RX_PACKET_1522BYTE (1 << 17) #define MAX_RX_PACKET_9700BYTE (5 << 17) #define MAX_RX_PACKET_MASK (7 << 17) #define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13) @@ -1674,13 +1673,12 @@ static void update_pscr(struct mv643xx_eth_private *mp, int speed, int duplex) SET_FULL_DUPLEX_MODE | MAX_RX_PACKET_MASK); - if (speed == SPEED_1000) { - pscr_n |= SET_GMII_SPEED_TO_1000 | MAX_RX_PACKET_9700BYTE; - } else { - if (speed == SPEED_100) - pscr_n |= SET_MII_SPEED_TO_100; - pscr_n |= MAX_RX_PACKET_1522BYTE; - } + pscr_n |= MAX_RX_PACKET_9700BYTE; + + if (speed == SPEED_1000) + pscr_n |= SET_GMII_SPEED_TO_1000; + else if (speed == SPEED_100) + pscr_n |= SET_MII_SPEED_TO_100; if (duplex == DUPLEX_FULL) pscr_n |= SET_FULL_DUPLEX_MODE; -- GitLab From ae9ae06443f7bfa4f013c0e2c035d549e999ad3e Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 02:15:24 +0200 Subject: [PATCH 0102/1024] mv643xx_eth: also check TX_IN_PROGRESS when disabling transmit path The recommended sequence for waiting for the transmit path to clear after disabling all of the transmit queues is to wait for the TX_FIFO_EMPTY bit in the Port Status register to become set as well as the TX_IN_PROGRESS bit to clear. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 207d4391a6d..c700c1f494e 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -90,6 +90,7 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define PORT_SERIAL_CONTROL(p) (0x043c + ((p) << 10)) #define PORT_STATUS(p) (0x0444 + ((p) << 10)) #define TX_FIFO_EMPTY 0x00000400 +#define TX_IN_PROGRESS 0x00000080 #define TXQ_COMMAND(p) (0x0448 + ((p) << 10)) #define TXQ_FIX_PRIO_CONF(p) (0x044c + ((p) << 10)) #define TX_BW_RATE(p) (0x0450 + ((p) << 10)) @@ -2039,8 +2040,14 @@ static void port_reset(struct mv643xx_eth_private *mp) if (mp->txq_mask & (1 << i)) txq_disable(mp->txq + i); } - while (!(rdl(mp, PORT_STATUS(mp->port_num)) & TX_FIFO_EMPTY)) + + while (1) { + u32 ps = rdl(mp, PORT_STATUS(mp->port_num)); + + if ((ps & (TX_IN_PROGRESS | TX_FIFO_EMPTY)) == TX_FIFO_EMPTY) + break; udelay(10); + } /* Reset the Enable bit in the Configuration Register */ data = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); -- GitLab From cd4ccf76bfd2c36d351e68be7e6a597268f98a1a Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 10 Jul 2008 14:40:51 +0200 Subject: [PATCH 0103/1024] mv643xx_eth: use longer DMA bursts The mv643xx_eth driver is limiting DMA bursts to 32 bytes, while using the largest burst size (128 bytes) gives a couple percentage points performance improvement in throughput tests, and the docs say that the 128 byte default should not need to be changed, so use 128 byte bursts instead. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index c700c1f494e..9d200568d88 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -129,21 +129,21 @@ static char mv643xx_eth_driver_version[] = "1.1"; /* * SDMA configuration register. */ -#define RX_BURST_SIZE_4_64BIT (2 << 1) +#define RX_BURST_SIZE_16_64BIT (4 << 1) #define BLM_RX_NO_SWAP (1 << 4) #define BLM_TX_NO_SWAP (1 << 5) -#define TX_BURST_SIZE_4_64BIT (2 << 22) +#define TX_BURST_SIZE_16_64BIT (4 << 22) #if defined(__BIG_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - RX_BURST_SIZE_4_64BIT | \ - TX_BURST_SIZE_4_64BIT + RX_BURST_SIZE_16_64BIT | \ + TX_BURST_SIZE_16_64BIT #elif defined(__LITTLE_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - RX_BURST_SIZE_4_64BIT | \ + RX_BURST_SIZE_16_64BIT | \ BLM_RX_NO_SWAP | \ BLM_TX_NO_SWAP | \ - TX_BURST_SIZE_4_64BIT + TX_BURST_SIZE_16_64BIT #else #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined #endif -- GitLab From 7f106c1d050c085c84d148ba56293e60b2c4e756 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 02:28:47 +0200 Subject: [PATCH 0104/1024] mv643xx_eth: use symbolic MII register addresses and values Instead of hardcoding MII register addresses and values, use the symbolic constants defined in linux/mii.h. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 9d200568d88..5bed6b33c7b 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -1831,14 +1831,14 @@ static void phy_reset(struct mv643xx_eth_private *mp) { unsigned int data; - smi_reg_read(mp, mp->phy_addr, 0, &data); - data |= 0x8000; - smi_reg_write(mp, mp->phy_addr, 0, data); + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data); + data |= BMCR_RESET; + smi_reg_write(mp, mp->phy_addr, MII_BMCR, data); do { udelay(1); - smi_reg_read(mp, mp->phy_addr, 0, &data); - } while (data & 0x8000); + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data); + } while (data & BMCR_RESET); } static void port_start(struct mv643xx_eth_private *mp) @@ -2385,14 +2385,14 @@ static int phy_detect(struct mv643xx_eth_private *mp) unsigned int data; unsigned int data2; - smi_reg_read(mp, mp->phy_addr, 0, &data); - smi_reg_write(mp, mp->phy_addr, 0, data ^ 0x1000); + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data); + smi_reg_write(mp, mp->phy_addr, MII_BMCR, data ^ BMCR_ANENABLE); - smi_reg_read(mp, mp->phy_addr, 0, &data2); - if (((data ^ data2) & 0x1000) == 0) + smi_reg_read(mp, mp->phy_addr, MII_BMCR, &data2); + if (((data ^ data2) & BMCR_ANENABLE) == 0) return -ENODEV; - smi_reg_write(mp, mp->phy_addr, 0, data); + smi_reg_write(mp, mp->phy_addr, MII_BMCR, data); return 0; } -- GitLab From 7dde154d3d0d9701ecfb5533017a8f1a20bb4214 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 12:20:30 +0200 Subject: [PATCH 0105/1024] mv643xx_eth: print driver version on init Print the mv643xx_eth driver version on init to help debugging. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 5bed6b33c7b..006ad45ddb8 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -2249,7 +2249,8 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev) int ret; if (!mv643xx_eth_version_printed++) - printk(KERN_NOTICE "MV-643xx 10/100/1000 Ethernet Driver\n"); + printk(KERN_NOTICE "MV-643xx 10/100/1000 ethernet " + "driver version %s\n", mv643xx_eth_driver_version); ret = -EINVAL; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -- GitLab From 81600eea98789da09a32de69ca9d3be8b9503c54 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 14 Jul 2008 14:29:40 +0200 Subject: [PATCH 0106/1024] mv643xx_eth: use auto phy polling for configuring (R)(G)MII interface The mv643xx_eth hardware has a provision for polling the PHY's MII management registers to obtain the (R)(G)MII interface speed (10/100/1000) and duplex (half/full) and pause (off/symmetric) settings to use to talk to the PHY. The driver currently does not make use of this feature. Instead, whenever there is a link status change event, it reads the current link parameters from the PHY, and programs those parameters into the mv643xx_eth MAC by hand. This patch switches the mv643xx_eth driver to letting the MAC auto-determine the (R)(G)MII link parameters by PHY polling, if there is a PHY present. For PHYless ports (when e.g. the (R)(G)MII interface is connected to a hardware switch), we keep hardcoding the MII interface parameters. Signed-off-by: Lennert Buytenhek --- arch/arm/mach-kirkwood/rd88f6281-setup.c | 3 + arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 3 + arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 3 + arch/arm/mach-orion5x/wnr854t-setup.c | 3 + arch/arm/mach-orion5x/wrt350n-v2-setup.c | 3 + drivers/net/mv643xx_eth.c | 140 +++++++++---------- 6 files changed, 81 insertions(+), 74 deletions(-) diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index e1f8de2c74a..b6437f47a77 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -69,6 +70,8 @@ static struct platform_device rd88f6281_nand_flash = { static struct mv643xx_eth_platform_data rd88f6281_ge00_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static struct mv_sata_platform_data rd88f6281_sata_data = { diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index d50e3650a09..73e9242da7a 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -88,6 +89,8 @@ static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = { static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static void __init rd88f5181l_fxo_init(void) diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index b56447d32e1..ac482019abb 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -89,6 +90,8 @@ static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = { static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = { diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 1af093ff8cf..25568c2a3d2 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -92,6 +93,8 @@ static struct platform_device wnr854t_nor_flash = { static struct mv643xx_eth_platform_data wnr854t_eth_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static void __init wnr854t_init(void) diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index aeab55c6a82..9b8ee8c48bf 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -100,6 +101,8 @@ static struct platform_device wrt350n_v2_nor_flash = { static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = { .phy_addr = -1, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static void __init wrt350n_v2_init(void) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 006ad45ddb8..29d4fe37cd5 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -91,6 +91,7 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define PORT_STATUS(p) (0x0444 + ((p) << 10)) #define TX_FIFO_EMPTY 0x00000400 #define TX_IN_PROGRESS 0x00000080 +#define LINK_UP 0x00000002 #define TXQ_COMMAND(p) (0x0448 + ((p) << 10)) #define TXQ_FIX_PRIO_CONF(p) (0x044c + ((p) << 10)) #define TX_BW_RATE(p) (0x0450 + ((p) << 10)) @@ -156,7 +157,6 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define SET_GMII_SPEED_TO_1000 (1 << 23) #define SET_FULL_DUPLEX_MODE (1 << 21) #define MAX_RX_PACKET_9700BYTE (5 << 17) -#define MAX_RX_PACKET_MASK (7 << 17) #define DISABLE_AUTO_NEG_SPEED_GMII (1 << 13) #define DO_NOT_FORCE_LINK_FAIL (1 << 10) #define SERIAL_PORT_CONTROL_RESERVED (1 << 9) @@ -1135,10 +1135,28 @@ static int mv643xx_eth_get_settings(struct net_device *dev, struct ethtool_cmd * static int mv643xx_eth_get_settings_phyless(struct net_device *dev, struct ethtool_cmd *cmd) { + struct mv643xx_eth_private *mp = netdev_priv(dev); + u32 port_status; + + port_status = rdl(mp, PORT_STATUS(mp->port_num)); + cmd->supported = SUPPORTED_MII; cmd->advertising = ADVERTISED_MII; - cmd->speed = SPEED_1000; - cmd->duplex = DUPLEX_FULL; + switch (port_status & PORT_SPEED_MASK) { + case PORT_SPEED_10: + cmd->speed = SPEED_10; + break; + case PORT_SPEED_100: + cmd->speed = SPEED_100; + break; + case PORT_SPEED_1000: + cmd->speed = SPEED_1000; + break; + default: + cmd->speed = -1; + break; + } + cmd->duplex = (port_status & FULL_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF; cmd->port = PORT_MII; cmd->phy_address = 0; cmd->transceiver = XCVR_INTERNAL; @@ -1661,51 +1679,6 @@ static void txq_deinit(struct tx_queue *txq) /* netdev ops and related ***************************************************/ -static void update_pscr(struct mv643xx_eth_private *mp, int speed, int duplex) -{ - u32 pscr_o; - u32 pscr_n; - - pscr_o = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); - - /* clear speed, duplex and rx buffer size fields */ - pscr_n = pscr_o & ~(SET_MII_SPEED_TO_100 | - SET_GMII_SPEED_TO_1000 | - SET_FULL_DUPLEX_MODE | - MAX_RX_PACKET_MASK); - - pscr_n |= MAX_RX_PACKET_9700BYTE; - - if (speed == SPEED_1000) - pscr_n |= SET_GMII_SPEED_TO_1000; - else if (speed == SPEED_100) - pscr_n |= SET_MII_SPEED_TO_100; - - if (duplex == DUPLEX_FULL) - pscr_n |= SET_FULL_DUPLEX_MODE; - - if (pscr_n != pscr_o) { - if ((pscr_o & SERIAL_PORT_ENABLE) == 0) - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n); - else { - int i; - - for (i = 0; i < 8; i++) - if (mp->txq_mask & (1 << i)) - txq_disable(mp->txq + i); - - pscr_o &= ~SERIAL_PORT_ENABLE; - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_o); - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n); - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr_n); - - for (i = 0; i < 8; i++) - if (mp->txq_mask & (1 << i)) - txq_enable(mp->txq + i); - } - } -} - static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; @@ -1726,14 +1699,7 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) } if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) { - if (mp->phy_addr == -1 || mii_link_ok(&mp->mii)) { - if (mp->phy_addr != -1) { - struct ethtool_cmd cmd; - - mii_ethtool_gset(&mp->mii, &cmd); - update_pscr(mp, cmd.speed, cmd.duplex); - } - + if (rdl(mp, PORT_STATUS(mp->port_num)) & LINK_UP) { if (!netif_carrier_ok(dev)) { netif_carrier_on(dev); netif_wake_queue(dev); @@ -1846,23 +1812,6 @@ static void port_start(struct mv643xx_eth_private *mp) u32 pscr; int i; - /* - * Configure basic link parameters. - */ - pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); - pscr &= ~(SERIAL_PORT_ENABLE | FORCE_LINK_PASS); - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); - pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL | - DISABLE_AUTO_NEG_SPEED_GMII | - DISABLE_AUTO_NEG_FOR_DUPLEX | - DO_NOT_FORCE_LINK_FAIL | - SERIAL_PORT_CONTROL_RESERVED; - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); - pscr |= SERIAL_PORT_ENABLE; - wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); - - wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE); - /* * Perform PHY reset, if there is a PHY. */ @@ -1874,6 +1823,21 @@ static void port_start(struct mv643xx_eth_private *mp) mv643xx_eth_set_settings(mp->dev, &cmd); } + /* + * Configure basic link parameters. + */ + pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); + + pscr |= SERIAL_PORT_ENABLE; + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); + + pscr |= DO_NOT_FORCE_LINK_FAIL; + if (mp->phy_addr == -1) + pscr |= FORCE_LINK_PASS; + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); + + wrl(mp, SDMA_CONFIG(mp->port_num), PORT_SDMA_CONFIG_DEFAULT_VALUE); + /* * Configure TX path and queues. */ @@ -2441,12 +2405,39 @@ static int phy_init(struct mv643xx_eth_private *mp, cmd.duplex = pd->duplex; } - update_pscr(mp, cmd.speed, cmd.duplex); mv643xx_eth_set_settings(mp->dev, &cmd); return 0; } +static void init_pscr(struct mv643xx_eth_private *mp, int speed, int duplex) +{ + u32 pscr; + + pscr = rdl(mp, PORT_SERIAL_CONTROL(mp->port_num)); + if (pscr & SERIAL_PORT_ENABLE) { + pscr &= ~SERIAL_PORT_ENABLE; + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); + } + + pscr = MAX_RX_PACKET_9700BYTE | SERIAL_PORT_CONTROL_RESERVED; + if (mp->phy_addr == -1) { + pscr |= DISABLE_AUTO_NEG_SPEED_GMII; + if (speed == SPEED_1000) + pscr |= SET_GMII_SPEED_TO_1000; + else if (speed == SPEED_100) + pscr |= SET_MII_SPEED_TO_100; + + pscr |= DISABLE_AUTO_NEG_FOR_FLOW_CTRL; + + pscr |= DISABLE_AUTO_NEG_FOR_DUPLEX; + if (duplex == DUPLEX_FULL) + pscr |= SET_FULL_DUPLEX_MODE; + } + + wrl(mp, PORT_SERIAL_CONTROL(mp->port_num), pscr); +} + static int mv643xx_eth_probe(struct platform_device *pdev) { struct mv643xx_eth_platform_data *pd; @@ -2500,6 +2491,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev) } else { SET_ETHTOOL_OPS(dev, &mv643xx_eth_ethtool_ops_phyless); } + init_pscr(mp, pd->speed, pd->duplex); res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); -- GitLab From 2f7eb47a7b9f703d4f7dfdab358df6ff1f2a2204 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 24 Jul 2008 06:22:59 +0200 Subject: [PATCH 0107/1024] mv643xx_eth: print message on link status change When there is a link status change (link or phy status interrupt), print a message notifying the user of the new link status. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 91 +++++++++++++++++++++++++++++---------- 1 file changed, 69 insertions(+), 22 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 29d4fe37cd5..01dd3c505d2 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -91,6 +91,12 @@ static char mv643xx_eth_driver_version[] = "1.1"; #define PORT_STATUS(p) (0x0444 + ((p) << 10)) #define TX_FIFO_EMPTY 0x00000400 #define TX_IN_PROGRESS 0x00000080 +#define PORT_SPEED_MASK 0x00000030 +#define PORT_SPEED_1000 0x00000010 +#define PORT_SPEED_100 0x00000020 +#define PORT_SPEED_10 0x00000000 +#define FLOW_CONTROL_ENABLED 0x00000008 +#define FULL_DUPLEX 0x00000004 #define LINK_UP 0x00000002 #define TXQ_COMMAND(p) (0x0448 + ((p) << 10)) #define TXQ_FIX_PRIO_CONF(p) (0x044c + ((p) << 10)) @@ -1679,6 +1685,64 @@ static void txq_deinit(struct tx_queue *txq) /* netdev ops and related ***************************************************/ +static void handle_link_event(struct mv643xx_eth_private *mp) +{ + struct net_device *dev = mp->dev; + u32 port_status; + int speed; + int duplex; + int fc; + + port_status = rdl(mp, PORT_STATUS(mp->port_num)); + if (!(port_status & LINK_UP)) { + if (netif_carrier_ok(dev)) { + int i; + + printk(KERN_INFO "%s: link down\n", dev->name); + + netif_carrier_off(dev); + netif_stop_queue(dev); + + for (i = 0; i < 8; i++) { + struct tx_queue *txq = mp->txq + i; + + if (mp->txq_mask & (1 << i)) { + txq_reclaim(txq, 1); + txq_reset_hw_ptr(txq); + } + } + } + return; + } + + switch (port_status & PORT_SPEED_MASK) { + case PORT_SPEED_10: + speed = 10; + break; + case PORT_SPEED_100: + speed = 100; + break; + case PORT_SPEED_1000: + speed = 1000; + break; + default: + speed = -1; + break; + } + duplex = (port_status & FULL_DUPLEX) ? 1 : 0; + fc = (port_status & FLOW_CONTROL_ENABLED) ? 1 : 0; + + printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, " + "flow control %sabled\n", dev->name, + speed, duplex ? "full" : "half", + fc ? "en" : "dis"); + + if (!netif_carrier_ok(dev)) { + netif_carrier_on(dev); + netif_wake_queue(dev); + } +} + static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; @@ -1698,28 +1762,8 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id) wrl(mp, INT_CAUSE_EXT(mp->port_num), ~int_cause_ext); } - if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) { - if (rdl(mp, PORT_STATUS(mp->port_num)) & LINK_UP) { - if (!netif_carrier_ok(dev)) { - netif_carrier_on(dev); - netif_wake_queue(dev); - } - } else if (netif_carrier_ok(dev)) { - int i; - - netif_stop_queue(dev); - netif_carrier_off(dev); - - for (i = 0; i < 8; i++) { - struct tx_queue *txq = mp->txq + i; - - if (mp->txq_mask & (1 << i)) { - txq_reclaim(txq, 1); - txq_reset_hw_ptr(txq); - } - } - } - } + if (int_cause_ext & (INT_EXT_PHY | INT_EXT_LINK)) + handle_link_event(mp); /* * RxBuffer or RxError set for any of the 8 queues? @@ -1970,6 +2014,9 @@ static int mv643xx_eth_open(struct net_device *dev) napi_enable(&mp->napi); #endif + netif_carrier_off(dev); + netif_stop_queue(dev); + port_start(mp); set_rx_coal(mp, 0); -- GitLab From e32b66175072d75bde1ddca4227a6723ca17e0af Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 24 Jul 2008 06:22:59 +0200 Subject: [PATCH 0108/1024] mv643xx_eth: enable hardware TX checksumming with vlan tags Although mv643xx_eth has no hardware support for inserting a vlan tag by twiddling some bits in the TX descriptor, it does support hardware TX checksumming on packets where the IP header starts {a limited set of values other than 14} bytes into the packet. This patch sets mv643xx_eth's ->vlan_features to NETIF_F_SG | NETIF_F_IP_CSUM, which prevents the stack from checksumming vlan'ed packets in software, and if vlan tags are present on a transmitted packet, notifies the hardware of this fact by toggling the right bits in the TX descriptor. Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 01dd3c505d2..88bb1f1e806 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -235,6 +235,8 @@ struct tx_desc { #define GEN_IP_V4_CHECKSUM 0x00040000 #define GEN_TCP_UDP_CHECKSUM 0x00020000 #define UDP_FRAME 0x00010000 +#define MAC_HDR_EXTRA_4_BYTES 0x00008000 +#define MAC_HDR_EXTRA_8_BYTES 0x00000200 #define TX_IHL_SHIFT 11 @@ -757,12 +759,36 @@ static void txq_submit_skb(struct tx_queue *txq, struct sk_buff *skb) desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE); if (skb->ip_summed == CHECKSUM_PARTIAL) { - BUG_ON(skb->protocol != htons(ETH_P_IP)); + int mac_hdr_len; + + BUG_ON(skb->protocol != htons(ETH_P_IP) && + skb->protocol != htons(ETH_P_8021Q)); cmd_sts |= GEN_TCP_UDP_CHECKSUM | GEN_IP_V4_CHECKSUM | ip_hdr(skb)->ihl << TX_IHL_SHIFT; + mac_hdr_len = (void *)ip_hdr(skb) - (void *)skb->data; + switch (mac_hdr_len - ETH_HLEN) { + case 0: + break; + case 4: + cmd_sts |= MAC_HDR_EXTRA_4_BYTES; + break; + case 8: + cmd_sts |= MAC_HDR_EXTRA_8_BYTES; + break; + case 12: + cmd_sts |= MAC_HDR_EXTRA_4_BYTES; + cmd_sts |= MAC_HDR_EXTRA_8_BYTES; + break; + default: + if (net_ratelimit()) + dev_printk(KERN_ERR, &txq_to_mp(txq)->dev->dev, + "mac header length is %d?!\n", mac_hdr_len); + break; + } + switch (ip_hdr(skb)->protocol) { case IPPROTO_UDP: cmd_sts |= UDP_FRAME; @@ -2565,6 +2591,7 @@ static int mv643xx_eth_probe(struct platform_device *pdev) * have to map the buffers to ISA memory which is only 16 MB */ dev->features = NETIF_F_SG | NETIF_F_IP_CSUM; + dev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM; #endif SET_NETDEV_DEV(dev, &pdev->dev); -- GitLab From ac0a2d0c8ab18045ab217339a71e76c76e186ede Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Tue, 15 Jul 2008 12:26:16 +0200 Subject: [PATCH 0109/1024] mv643xx_eth: bump version to 1.2 Signed-off-by: Lennert Buytenhek --- drivers/net/mv643xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 88bb1f1e806..46819af3b06 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -55,7 +55,7 @@ #include static char mv643xx_eth_driver_name[] = "mv643xx_eth"; -static char mv643xx_eth_driver_version[] = "1.1"; +static char mv643xx_eth_driver_version[] = "1.2"; #define MV643XX_ETH_CHECKSUM_OFFLOAD_TX #define MV643XX_ETH_NAPI -- GitLab From ec05e868ac80cc8fc7de6e5cf773b232198e49af Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 24 Jul 2008 12:49:59 -0400 Subject: [PATCH 0110/1024] ext4: improve ext4_fill_flex_info() a bit - use kzalloc() instead of kmalloc() + memset() - improve a printk info Signed-off-by: Li Zefan Signed-off-by: Theodore Ts'o --- fs/ext4/super.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 511997ef6f0..e34fc2d6dbf 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1506,14 +1506,13 @@ static int ext4_fill_flex_info(struct super_block *sb) flex_group_count = (sbi->s_groups_count + groups_per_flex - 1) / groups_per_flex; - sbi->s_flex_groups = kmalloc(flex_group_count * + sbi->s_flex_groups = kzalloc(flex_group_count * sizeof(struct flex_groups), GFP_KERNEL); if (sbi->s_flex_groups == NULL) { - printk(KERN_ERR "EXT4-fs: not enough memory\n"); + printk(KERN_ERR "EXT4-fs: not enough memory for " + "%lu flex groups\n", flex_group_count); goto failed; } - memset(sbi->s_flex_groups, 0, flex_group_count * - sizeof(struct flex_groups)); gdp = ext4_get_group_desc(sb, 1, &bh); block_bitmap = ext4_block_bitmap(sb, gdp) - 1; -- GitLab From 0b21bb49187a863e3fc3c4f3356baf03578a9d1a Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 25 Jul 2008 14:22:02 -0500 Subject: [PATCH 0111/1024] powerpc: clean up the Book-E HW watchpoint support * CONFIG_BOOKE is selected by CONFIG_44x so we dont need both * Fixed a few comments * Go back to only using DBCR0_IDM to determine if we are using debug resources. Signed-off-by: Kumar Gala --- arch/powerpc/kernel/entry_32.S | 6 +++--- arch/powerpc/kernel/process.c | 8 ++++---- arch/powerpc/kernel/ptrace.c | 7 ++++--- arch/powerpc/kernel/signal.c | 2 +- 4 files changed, 12 insertions(+), 11 deletions(-) diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 81c8324a4a3..da52269aec1 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -148,7 +148,7 @@ transfer_to_handler: /* Check to see if the dbcr0 register is set up to debug. Use the internal debug mode bit to do this. */ lwz r12,THREAD_DBCR0(r12) - andis. r12,r12,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r12,r12,DBCR0_IDM@h beq+ 3f /* From user and task is ptraced - load up global dbcr0 */ li r12,-1 /* clear all pending debug events */ @@ -292,7 +292,7 @@ syscall_exit_cont: /* If the process has its own DBCR0 value, load it up. The internal debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r10,r0,DBCR0_IDM@h bnel- load_dbcr0 #endif #ifdef CONFIG_44x @@ -720,7 +720,7 @@ restore_user: /* Check whether this process has its own DBCR0 value. The internal debug mode bit tells us that dbcr0 should be loaded. */ lwz r0,THREAD+THREAD_DBCR0(r2) - andis. r10,r0,(DBCR0_IDM | DBSR_DAC1R | DBSR_DAC1W)@h + andis. r10,r0,DBCR0_IDM@h bnel- load_dbcr0 #endif diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index db2497ccc11..e030f3bd502 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -254,7 +254,7 @@ void do_dabr(struct pt_regs *regs, unsigned long address, return; /* Clear the DAC and struct entries. One shot trigger */ -#if (defined(CONFIG_44x) || defined(CONFIG_BOOKE)) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM)); #endif @@ -286,7 +286,7 @@ int set_dabr(unsigned long dabr) mtspr(SPRN_DABR, dabr); #endif -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DAC1, dabr); #endif @@ -373,7 +373,7 @@ struct task_struct *__switch_to(struct task_struct *prev, if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) set_dabr(new->thread.dabr); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* If new thread DAC (HW breakpoint) is the same then leave it */ if (new->thread.dabr) set_dabr(new->thread.dabr); @@ -568,7 +568,7 @@ void flush_thread(void) current->thread.dabr = 0; set_dabr(0); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W); #endif } diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index a5d0e78779c..66204cb51a1 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -717,7 +717,7 @@ void user_disable_single_step(struct task_struct *task) struct pt_regs *regs = task->thread.regs; -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* If DAC then do not single step, skip */ if (task->thread.dabr) return; @@ -744,10 +744,11 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, if (addr > 0) return -EINVAL; + /* The bottom 3 bits in dabr are flags */ if ((data & ~0x7UL) >= TASK_SIZE) return -EIO; -#ifdef CONFIG_PPC64 +#ifndef CONFIG_BOOKE /* For processors using DABR (i.e. 970), the bottom 3 bits are flags. * It was assumed, on previous implementations, that 3 bits were @@ -769,7 +770,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, task->thread.dabr = data; #endif -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) /* As described above, it was assumed 3 bits were passed with the data * address, but we will assume only the mode bits will be passed diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 7aada783ec6..2b5eaa6c8f3 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -147,7 +147,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) */ if (current->thread.dabr) { set_dabr(current->thread.dabr); -#if defined(CONFIG_44x) || defined(CONFIG_BOOKE) +#if defined(CONFIG_BOOKE) mtspr(SPRN_DBCR0, current->thread.dbcr0); #endif } -- GitLab From 4c920de37d29284d4cb65d76a97a567247c2ac32 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 26 Jul 2008 12:55:09 -0500 Subject: [PATCH 0112/1024] powerpc: Fix 8xx build failure The 'powerpc ioremap_prot' broke 8xx builds: include2/asm/pgtable-ppc32.h:555: error: '_PAGE_WRITETHRU' undeclared (first use in this function) include2/asm/pgtable-ppc32.h:555: error: (Each undeclared identifier is reported only once include2/asm/pgtable-ppc32.h:555: error: for each function it appears in.) Signed-off-by: Kumar Gala --- include/asm-powerpc/pgtable-ppc32.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h index bdbab72f3eb..6fe39e32704 100644 --- a/include/asm-powerpc/pgtable-ppc32.h +++ b/include/asm-powerpc/pgtable-ppc32.h @@ -401,6 +401,9 @@ extern int icache_44x_need_flush; #ifndef _PAGE_COHERENT #define _PAGE_COHERENT 0 #endif +#ifndef _PAGE_WRITETHRU +#define _PAGE_WRITETHRU 0 +#endif #ifndef _PMD_PRESENT_MASK #define _PMD_PRESENT_MASK _PMD_PRESENT #endif -- GitLab From 2b2d6d019724de6e51ac5bcf22b5ef969daefa8b Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 26 Jul 2008 16:15:44 -0400 Subject: [PATCH 0113/1024] ext4: Cleanup whitespace and other miscellaneous style issues Signed-off-by: "Theodore Ts'o" --- fs/ext4/acl.c | 188 +++++++++++++++--------------- fs/ext4/extents.c | 2 +- fs/ext4/inode.c | 5 +- fs/ext4/resize.c | 79 ++++++------- fs/ext4/super.c | 283 +++++++++++++++++++++++----------------------- fs/ext4/xattr.c | 2 +- 6 files changed, 277 insertions(+), 282 deletions(-) diff --git a/fs/ext4/acl.c b/fs/ext4/acl.c index c7d04e16544..694ed6fadcc 100644 --- a/fs/ext4/acl.c +++ b/fs/ext4/acl.c @@ -40,34 +40,35 @@ ext4_acl_from_disk(const void *value, size_t size) acl = posix_acl_alloc(count, GFP_NOFS); if (!acl) return ERR_PTR(-ENOMEM); - for (n=0; n < count; n++) { + for (n = 0; n < count; n++) { ext4_acl_entry *entry = (ext4_acl_entry *)value; if ((char *)value + sizeof(ext4_acl_entry_short) > end) goto fail; acl->a_entries[n].e_tag = le16_to_cpu(entry->e_tag); acl->a_entries[n].e_perm = le16_to_cpu(entry->e_perm); - switch(acl->a_entries[n].e_tag) { - case ACL_USER_OBJ: - case ACL_GROUP_OBJ: - case ACL_MASK: - case ACL_OTHER: - value = (char *)value + - sizeof(ext4_acl_entry_short); - acl->a_entries[n].e_id = ACL_UNDEFINED_ID; - break; - - case ACL_USER: - case ACL_GROUP: - value = (char *)value + sizeof(ext4_acl_entry); - if ((char *)value > end) - goto fail; - acl->a_entries[n].e_id = - le32_to_cpu(entry->e_id); - break; - - default: + + switch (acl->a_entries[n].e_tag) { + case ACL_USER_OBJ: + case ACL_GROUP_OBJ: + case ACL_MASK: + case ACL_OTHER: + value = (char *)value + + sizeof(ext4_acl_entry_short); + acl->a_entries[n].e_id = ACL_UNDEFINED_ID; + break; + + case ACL_USER: + case ACL_GROUP: + value = (char *)value + sizeof(ext4_acl_entry); + if ((char *)value > end) goto fail; + acl->a_entries[n].e_id = + le32_to_cpu(entry->e_id); + break; + + default: + goto fail; } } if (value != end) @@ -96,27 +97,26 @@ ext4_acl_to_disk(const struct posix_acl *acl, size_t *size) return ERR_PTR(-ENOMEM); ext_acl->a_version = cpu_to_le32(EXT4_ACL_VERSION); e = (char *)ext_acl + sizeof(ext4_acl_header); - for (n=0; n < acl->a_count; n++) { + for (n = 0; n < acl->a_count; n++) { ext4_acl_entry *entry = (ext4_acl_entry *)e; entry->e_tag = cpu_to_le16(acl->a_entries[n].e_tag); entry->e_perm = cpu_to_le16(acl->a_entries[n].e_perm); - switch(acl->a_entries[n].e_tag) { - case ACL_USER: - case ACL_GROUP: - entry->e_id = - cpu_to_le32(acl->a_entries[n].e_id); - e += sizeof(ext4_acl_entry); - break; - - case ACL_USER_OBJ: - case ACL_GROUP_OBJ: - case ACL_MASK: - case ACL_OTHER: - e += sizeof(ext4_acl_entry_short); - break; - - default: - goto fail; + switch (acl->a_entries[n].e_tag) { + case ACL_USER: + case ACL_GROUP: + entry->e_id = cpu_to_le32(acl->a_entries[n].e_id); + e += sizeof(ext4_acl_entry); + break; + + case ACL_USER_OBJ: + case ACL_GROUP_OBJ: + case ACL_MASK: + case ACL_OTHER: + e += sizeof(ext4_acl_entry_short); + break; + + default: + goto fail; } } return (char *)ext_acl; @@ -167,23 +167,23 @@ ext4_get_acl(struct inode *inode, int type) if (!test_opt(inode->i_sb, POSIX_ACL)) return NULL; - switch(type) { - case ACL_TYPE_ACCESS: - acl = ext4_iget_acl(inode, &ei->i_acl); - if (acl != EXT4_ACL_NOT_CACHED) - return acl; - name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS; - break; - - case ACL_TYPE_DEFAULT: - acl = ext4_iget_acl(inode, &ei->i_default_acl); - if (acl != EXT4_ACL_NOT_CACHED) - return acl; - name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT; - break; - - default: - return ERR_PTR(-EINVAL); + switch (type) { + case ACL_TYPE_ACCESS: + acl = ext4_iget_acl(inode, &ei->i_acl); + if (acl != EXT4_ACL_NOT_CACHED) + return acl; + name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS; + break; + + case ACL_TYPE_DEFAULT: + acl = ext4_iget_acl(inode, &ei->i_default_acl); + if (acl != EXT4_ACL_NOT_CACHED) + return acl; + name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT; + break; + + default: + return ERR_PTR(-EINVAL); } retval = ext4_xattr_get(inode, name_index, "", NULL, 0); if (retval > 0) { @@ -201,14 +201,14 @@ ext4_get_acl(struct inode *inode, int type) kfree(value); if (!IS_ERR(acl)) { - switch(type) { - case ACL_TYPE_ACCESS: - ext4_iset_acl(inode, &ei->i_acl, acl); - break; - - case ACL_TYPE_DEFAULT: - ext4_iset_acl(inode, &ei->i_default_acl, acl); - break; + switch (type) { + case ACL_TYPE_ACCESS: + ext4_iset_acl(inode, &ei->i_acl, acl); + break; + + case ACL_TYPE_DEFAULT: + ext4_iset_acl(inode, &ei->i_default_acl, acl); + break; } } return acl; @@ -232,31 +232,31 @@ ext4_set_acl(handle_t *handle, struct inode *inode, int type, if (S_ISLNK(inode->i_mode)) return -EOPNOTSUPP; - switch(type) { - case ACL_TYPE_ACCESS: - name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS; - if (acl) { - mode_t mode = inode->i_mode; - error = posix_acl_equiv_mode(acl, &mode); - if (error < 0) - return error; - else { - inode->i_mode = mode; - ext4_mark_inode_dirty(handle, inode); - if (error == 0) - acl = NULL; - } + switch (type) { + case ACL_TYPE_ACCESS: + name_index = EXT4_XATTR_INDEX_POSIX_ACL_ACCESS; + if (acl) { + mode_t mode = inode->i_mode; + error = posix_acl_equiv_mode(acl, &mode); + if (error < 0) + return error; + else { + inode->i_mode = mode; + ext4_mark_inode_dirty(handle, inode); + if (error == 0) + acl = NULL; } - break; + } + break; - case ACL_TYPE_DEFAULT: - name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT; - if (!S_ISDIR(inode->i_mode)) - return acl ? -EACCES : 0; - break; + case ACL_TYPE_DEFAULT: + name_index = EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT; + if (!S_ISDIR(inode->i_mode)) + return acl ? -EACCES : 0; + break; - default: - return -EINVAL; + default: + return -EINVAL; } if (acl) { value = ext4_acl_to_disk(acl, &size); @@ -269,14 +269,14 @@ ext4_set_acl(handle_t *handle, struct inode *inode, int type, kfree(value); if (!error) { - switch(type) { - case ACL_TYPE_ACCESS: - ext4_iset_acl(inode, &ei->i_acl, acl); - break; - - case ACL_TYPE_DEFAULT: - ext4_iset_acl(inode, &ei->i_default_acl, acl); - break; + switch (type) { + case ACL_TYPE_ACCESS: + ext4_iset_acl(inode, &ei->i_acl, acl); + break; + + case ACL_TYPE_DEFAULT: + ext4_iset_acl(inode, &ei->i_default_acl, acl); + break; } } return error; diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index f7529e27d79..612c3d2c382 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1441,7 +1441,7 @@ unsigned int ext4_ext_check_overlap(struct inode *inode, /* * get the next allocated block if the extent in the path - * is before the requested block(s) + * is before the requested block(s) */ if (b2 < b1) { b2 = ext4_ext_next_allocated_block(path); diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 85a862c9c4c..0080999d2cd 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1054,10 +1054,9 @@ static void ext4_da_update_reserve_space(struct inode *inode, int used) /* + * The ext4_get_blocks_wrap() function try to look up the requested blocks, + * and returns if the blocks are already mapped. * - * - * ext4_ext4 get_block() wrapper function - * It will do a look up first, and returns if the blocks already mapped. * Otherwise it takes the write lock of the i_data_sem and allocate blocks * and store the allocated blocks in the result buffer head and mark it * mapped. diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index f000fbe2cd9..0a926516426 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -73,7 +73,7 @@ static int verify_group_input(struct super_block *sb, "Inode bitmap not in group (block %llu)", (unsigned long long)input->inode_bitmap); else if (outside(input->inode_table, start, end) || - outside(itend - 1, start, end)) + outside(itend - 1, start, end)) ext4_warning(sb, __func__, "Inode table not in group (blocks %llu-%llu)", (unsigned long long)input->inode_table, itend - 1); @@ -104,7 +104,7 @@ static int verify_group_input(struct super_block *sb, (unsigned long long)input->inode_bitmap, start, metaend - 1); else if (inside(input->inode_table, start, metaend) || - inside(itend - 1, start, metaend)) + inside(itend - 1, start, metaend)) ext4_warning(sb, __func__, "Inode table (%llu-%llu) overlaps" "GDT table (%llu-%llu)", @@ -158,9 +158,9 @@ static int extend_or_restart_transaction(handle_t *handle, int thresh, if (err) { if ((err = ext4_journal_restart(handle, EXT4_MAX_TRANS_DATA))) return err; - if ((err = ext4_journal_get_write_access(handle, bh))) + if ((err = ext4_journal_get_write_access(handle, bh))) return err; - } + } return 0; } @@ -416,11 +416,11 @@ static int add_new_gdb(handle_t *handle, struct inode *inode, "EXT4-fs: ext4_add_new_gdb: adding group block %lu\n", gdb_num); - /* - * If we are not using the primary superblock/GDT copy don't resize, - * because the user tools have no way of handling this. Probably a - * bad time to do it anyways. - */ + /* + * If we are not using the primary superblock/GDT copy don't resize, + * because the user tools have no way of handling this. Probably a + * bad time to do it anyways. + */ if (EXT4_SB(sb)->s_sbh->b_blocknr != le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block)) { ext4_warning(sb, __func__, @@ -507,14 +507,14 @@ static int add_new_gdb(handle_t *handle, struct inode *inode, return 0; exit_inode: - //ext4_journal_release_buffer(handle, iloc.bh); + /* ext4_journal_release_buffer(handle, iloc.bh); */ brelse(iloc.bh); exit_dindj: - //ext4_journal_release_buffer(handle, dind); + /* ext4_journal_release_buffer(handle, dind); */ exit_primary: - //ext4_journal_release_buffer(handle, *primary); + /* ext4_journal_release_buffer(handle, *primary); */ exit_sbh: - //ext4_journal_release_buffer(handle, *primary); + /* ext4_journal_release_buffer(handle, *primary); */ exit_dind: brelse(dind); exit_bh: @@ -818,12 +818,12 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input) if ((err = ext4_journal_get_write_access(handle, sbi->s_sbh))) goto exit_journal; - /* - * We will only either add reserved group blocks to a backup group - * or remove reserved blocks for the first group in a new group block. - * Doing both would be mean more complex code, and sane people don't - * use non-sparse filesystems anymore. This is already checked above. - */ + /* + * We will only either add reserved group blocks to a backup group + * or remove reserved blocks for the first group in a new group block. + * Doing both would be mean more complex code, and sane people don't + * use non-sparse filesystems anymore. This is already checked above. + */ if (gdb_off) { primary = sbi->s_group_desc[gdb_num]; if ((err = ext4_journal_get_write_access(handle, primary))) @@ -835,24 +835,24 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input) } else if ((err = add_new_gdb(handle, inode, input, &primary))) goto exit_journal; - /* - * OK, now we've set up the new group. Time to make it active. - * - * Current kernels don't lock all allocations via lock_super(), - * so we have to be safe wrt. concurrent accesses the group - * data. So we need to be careful to set all of the relevant - * group descriptor data etc. *before* we enable the group. - * - * The key field here is sbi->s_groups_count: as long as - * that retains its old value, nobody is going to access the new - * group. - * - * So first we update all the descriptor metadata for the new - * group; then we update the total disk blocks count; then we - * update the groups count to enable the group; then finally we - * update the free space counts so that the system can start - * using the new disk blocks. - */ + /* + * OK, now we've set up the new group. Time to make it active. + * + * Current kernels don't lock all allocations via lock_super(), + * so we have to be safe wrt. concurrent accesses the group + * data. So we need to be careful to set all of the relevant + * group descriptor data etc. *before* we enable the group. + * + * The key field here is sbi->s_groups_count: as long as + * that retains its old value, nobody is going to access the new + * group. + * + * So first we update all the descriptor metadata for the new + * group; then we update the total disk blocks count; then we + * update the groups count to enable the group; then finally we + * update the free space counts so that the system can start + * using the new disk blocks. + */ /* Update group descriptor block for new group */ gdp = (struct ext4_group_desc *)((char *)primary->b_data + @@ -946,7 +946,8 @@ exit_put: return err; } /* ext4_group_add */ -/* Extend the filesystem to the new number of blocks specified. This entry +/* + * Extend the filesystem to the new number of blocks specified. This entry * point is only used to extend the current filesystem to the end of the last * existing group. It can be accessed via ioctl, or by "remount,resize=" * for emergencies (because it has no dependencies on reserved blocks). @@ -1024,7 +1025,7 @@ int ext4_group_extend(struct super_block *sb, struct ext4_super_block *es, o_blocks_count + add, add); /* See if the device is actually as big as what was requested */ - bh = sb_bread(sb, o_blocks_count + add -1); + bh = sb_bread(sb, o_blocks_count + add - 1); if (!bh) { ext4_warning(sb, __func__, "can't read last block, resize aborted"); diff --git a/fs/ext4/super.c b/fs/ext4/super.c index e34fc2d6dbf..09e3c56782a 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -49,20 +49,19 @@ static int ext4_load_journal(struct super_block *, struct ext4_super_block *, unsigned long journal_devnum); static int ext4_create_journal(struct super_block *, struct ext4_super_block *, unsigned int); -static void ext4_commit_super (struct super_block * sb, - struct ext4_super_block * es, - int sync); -static void ext4_mark_recovery_complete(struct super_block * sb, - struct ext4_super_block * es); -static void ext4_clear_journal_err(struct super_block * sb, - struct ext4_super_block * es); +static void ext4_commit_super(struct super_block *sb, + struct ext4_super_block *es, int sync); +static void ext4_mark_recovery_complete(struct super_block *sb, + struct ext4_super_block *es); +static void ext4_clear_journal_err(struct super_block *sb, + struct ext4_super_block *es); static int ext4_sync_fs(struct super_block *sb, int wait); -static const char *ext4_decode_error(struct super_block * sb, int errno, +static const char *ext4_decode_error(struct super_block *sb, int errno, char nbuf[16]); -static int ext4_remount (struct super_block * sb, int * flags, char * data); -static int ext4_statfs (struct dentry * dentry, struct kstatfs * buf); +static int ext4_remount(struct super_block *sb, int *flags, char *data); +static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf); static void ext4_unlockfs(struct super_block *sb); -static void ext4_write_super (struct super_block * sb); +static void ext4_write_super(struct super_block *sb); static void ext4_write_super_lockfs(struct super_block *sb); @@ -211,15 +210,15 @@ static void ext4_handle_error(struct super_block *sb) if (sb->s_flags & MS_RDONLY) return; - if (!test_opt (sb, ERRORS_CONT)) { + if (!test_opt(sb, ERRORS_CONT)) { journal_t *journal = EXT4_SB(sb)->s_journal; EXT4_SB(sb)->s_mount_opt |= EXT4_MOUNT_ABORT; if (journal) jbd2_journal_abort(journal, -EIO); } - if (test_opt (sb, ERRORS_RO)) { - printk (KERN_CRIT "Remounting filesystem read-only\n"); + if (test_opt(sb, ERRORS_RO)) { + printk(KERN_CRIT "Remounting filesystem read-only\n"); sb->s_flags |= MS_RDONLY; } ext4_commit_super(sb, es, 1); @@ -228,13 +227,13 @@ static void ext4_handle_error(struct super_block *sb) sb->s_id); } -void ext4_error (struct super_block * sb, const char * function, - const char * fmt, ...) +void ext4_error(struct super_block *sb, const char *function, + const char *fmt, ...) { va_list args; va_start(args, fmt); - printk(KERN_CRIT "EXT4-fs error (device %s): %s: ",sb->s_id, function); + printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function); vprintk(fmt, args); printk("\n"); va_end(args); @@ -242,7 +241,7 @@ void ext4_error (struct super_block * sb, const char * function, ext4_handle_error(sb); } -static const char *ext4_decode_error(struct super_block * sb, int errno, +static const char *ext4_decode_error(struct super_block *sb, int errno, char nbuf[16]) { char *errstr = NULL; @@ -278,8 +277,7 @@ static const char *ext4_decode_error(struct super_block * sb, int errno, /* __ext4_std_error decodes expected errors from journaling functions * automatically and invokes the appropriate error response. */ -void __ext4_std_error (struct super_block * sb, const char * function, - int errno) +void __ext4_std_error(struct super_block *sb, const char *function, int errno) { char nbuf[16]; const char *errstr; @@ -292,8 +290,8 @@ void __ext4_std_error (struct super_block * sb, const char * function, return; errstr = ext4_decode_error(sb, errno, nbuf); - printk (KERN_CRIT "EXT4-fs error (device %s) in %s: %s\n", - sb->s_id, function, errstr); + printk(KERN_CRIT "EXT4-fs error (device %s) in %s: %s\n", + sb->s_id, function, errstr); ext4_handle_error(sb); } @@ -308,15 +306,15 @@ void __ext4_std_error (struct super_block * sb, const char * function, * case we take the easy way out and panic immediately. */ -void ext4_abort (struct super_block * sb, const char * function, - const char * fmt, ...) +void ext4_abort(struct super_block *sb, const char *function, + const char *fmt, ...) { va_list args; - printk (KERN_CRIT "ext4_abort called.\n"); + printk(KERN_CRIT "ext4_abort called.\n"); va_start(args, fmt); - printk(KERN_CRIT "EXT4-fs error (device %s): %s: ",sb->s_id, function); + printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function); vprintk(fmt, args); printk("\n"); va_end(args); @@ -334,8 +332,8 @@ void ext4_abort (struct super_block * sb, const char * function, jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO); } -void ext4_warning (struct super_block * sb, const char * function, - const char * fmt, ...) +void ext4_warning(struct super_block *sb, const char *function, + const char *fmt, ...) { va_list args; @@ -496,7 +494,7 @@ static void dump_orphan_list(struct super_block *sb, struct ext4_sb_info *sbi) } } -static void ext4_put_super (struct super_block * sb) +static void ext4_put_super(struct super_block *sb) { struct ext4_sb_info *sbi = EXT4_SB(sb); struct ext4_super_block *es = sbi->s_es; @@ -647,7 +645,8 @@ static void ext4_clear_inode(struct inode *inode) &EXT4_I(inode)->jinode); } -static inline void ext4_show_quota_options(struct seq_file *seq, struct super_block *sb) +static inline void ext4_show_quota_options(struct seq_file *seq, + struct super_block *sb) { #if defined(CONFIG_QUOTA) struct ext4_sb_info *sbi = EXT4_SB(sb); @@ -822,8 +821,8 @@ static struct dentry *ext4_fh_to_parent(struct super_block *sb, struct fid *fid, } #ifdef CONFIG_QUOTA -#define QTYPE2NAME(t) ((t)==USRQUOTA?"user":"group") -#define QTYPE2MOPT(on, t) ((t)==USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA)) +#define QTYPE2NAME(t) ((t) == USRQUOTA?"user":"group") +#define QTYPE2MOPT(on, t) ((t) == USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA)) static int ext4_dquot_initialize(struct inode *inode, int type); static int ext4_dquot_drop(struct inode *inode); @@ -991,12 +990,12 @@ static ext4_fsblk_t get_sb_block(void **data) return sb_block; } -static int parse_options (char *options, struct super_block *sb, - unsigned int *inum, unsigned long *journal_devnum, - ext4_fsblk_t *n_blocks_count, int is_remount) +static int parse_options(char *options, struct super_block *sb, + unsigned int *inum, unsigned long *journal_devnum, + ext4_fsblk_t *n_blocks_count, int is_remount) { struct ext4_sb_info *sbi = EXT4_SB(sb); - char * p; + char *p; substring_t args[MAX_OPT_ARGS]; int data_opt = 0; int option; @@ -1009,7 +1008,7 @@ static int parse_options (char *options, struct super_block *sb, if (!options) return 1; - while ((p = strsep (&options, ",")) != NULL) { + while ((p = strsep(&options, ",")) != NULL) { int token; if (!*p) continue; @@ -1017,16 +1016,16 @@ static int parse_options (char *options, struct super_block *sb, token = match_token(p, tokens, args); switch (token) { case Opt_bsd_df: - clear_opt (sbi->s_mount_opt, MINIX_DF); + clear_opt(sbi->s_mount_opt, MINIX_DF); break; case Opt_minix_df: - set_opt (sbi->s_mount_opt, MINIX_DF); + set_opt(sbi->s_mount_opt, MINIX_DF); break; case Opt_grpid: - set_opt (sbi->s_mount_opt, GRPID); + set_opt(sbi->s_mount_opt, GRPID); break; case Opt_nogrpid: - clear_opt (sbi->s_mount_opt, GRPID); + clear_opt(sbi->s_mount_opt, GRPID); break; case Opt_resuid: if (match_int(&args[0], &option)) @@ -1043,41 +1042,41 @@ static int parse_options (char *options, struct super_block *sb, /* *sb_block = match_int(&args[0]); */ break; case Opt_err_panic: - clear_opt (sbi->s_mount_opt, ERRORS_CONT); - clear_opt (sbi->s_mount_opt, ERRORS_RO); - set_opt (sbi->s_mount_opt, ERRORS_PANIC); + clear_opt(sbi->s_mount_opt, ERRORS_CONT); + clear_opt(sbi->s_mount_opt, ERRORS_RO); + set_opt(sbi->s_mount_opt, ERRORS_PANIC); break; case Opt_err_ro: - clear_opt (sbi->s_mount_opt, ERRORS_CONT); - clear_opt (sbi->s_mount_opt, ERRORS_PANIC); - set_opt (sbi->s_mount_opt, ERRORS_RO); + clear_opt(sbi->s_mount_opt, ERRORS_CONT); + clear_opt(sbi->s_mount_opt, ERRORS_PANIC); + set_opt(sbi->s_mount_opt, ERRORS_RO); break; case Opt_err_cont: - clear_opt (sbi->s_mount_opt, ERRORS_RO); - clear_opt (sbi->s_mount_opt, ERRORS_PANIC); - set_opt (sbi->s_mount_opt, ERRORS_CONT); + clear_opt(sbi->s_mount_opt, ERRORS_RO); + clear_opt(sbi->s_mount_opt, ERRORS_PANIC); + set_opt(sbi->s_mount_opt, ERRORS_CONT); break; case Opt_nouid32: - set_opt (sbi->s_mount_opt, NO_UID32); + set_opt(sbi->s_mount_opt, NO_UID32); break; case Opt_nocheck: - clear_opt (sbi->s_mount_opt, CHECK); + clear_opt(sbi->s_mount_opt, CHECK); break; case Opt_debug: - set_opt (sbi->s_mount_opt, DEBUG); + set_opt(sbi->s_mount_opt, DEBUG); break; case Opt_oldalloc: - set_opt (sbi->s_mount_opt, OLDALLOC); + set_opt(sbi->s_mount_opt, OLDALLOC); break; case Opt_orlov: - clear_opt (sbi->s_mount_opt, OLDALLOC); + clear_opt(sbi->s_mount_opt, OLDALLOC); break; #ifdef CONFIG_EXT4DEV_FS_XATTR case Opt_user_xattr: - set_opt (sbi->s_mount_opt, XATTR_USER); + set_opt(sbi->s_mount_opt, XATTR_USER); break; case Opt_nouser_xattr: - clear_opt (sbi->s_mount_opt, XATTR_USER); + clear_opt(sbi->s_mount_opt, XATTR_USER); break; #else case Opt_user_xattr: @@ -1115,7 +1114,7 @@ static int parse_options (char *options, struct super_block *sb, "journal on remount\n"); return 0; } - set_opt (sbi->s_mount_opt, UPDATE_JOURNAL); + set_opt(sbi->s_mount_opt, UPDATE_JOURNAL); break; case Opt_journal_inum: if (is_remount) { @@ -1145,7 +1144,7 @@ static int parse_options (char *options, struct super_block *sb, set_opt(sbi->s_mount_opt, JOURNAL_CHECKSUM); break; case Opt_noload: - set_opt (sbi->s_mount_opt, NOLOAD); + set_opt(sbi->s_mount_opt, NOLOAD); break; case Opt_commit: if (match_int(&args[0], &option)) @@ -1331,7 +1330,7 @@ set_qf_format: "on this filesystem, use tune2fs\n"); return 0; } - set_opt (sbi->s_mount_opt, EXTENTS); + set_opt(sbi->s_mount_opt, EXTENTS); break; case Opt_noextents: /* @@ -1348,7 +1347,7 @@ set_qf_format: "-o noextents options\n"); return 0; } - clear_opt (sbi->s_mount_opt, EXTENTS); + clear_opt(sbi->s_mount_opt, EXTENTS); break; case Opt_i_version: set_opt(sbi->s_mount_opt, I_VERSION); @@ -1374,9 +1373,9 @@ set_qf_format: set_opt(sbi->s_mount_opt, DELALLOC); break; default: - printk (KERN_ERR - "EXT4-fs: Unrecognized mount option \"%s\" " - "or missing value\n", p); + printk(KERN_ERR + "EXT4-fs: Unrecognized mount option \"%s\" " + "or missing value\n", p); return 0; } } @@ -1423,31 +1422,31 @@ static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es, int res = 0; if (le32_to_cpu(es->s_rev_level) > EXT4_MAX_SUPP_REV) { - printk (KERN_ERR "EXT4-fs warning: revision level too high, " - "forcing read-only mode\n"); + printk(KERN_ERR "EXT4-fs warning: revision level too high, " + "forcing read-only mode\n"); res = MS_RDONLY; } if (read_only) return res; if (!(sbi->s_mount_state & EXT4_VALID_FS)) - printk (KERN_WARNING "EXT4-fs warning: mounting unchecked fs, " - "running e2fsck is recommended\n"); + printk(KERN_WARNING "EXT4-fs warning: mounting unchecked fs, " + "running e2fsck is recommended\n"); else if ((sbi->s_mount_state & EXT4_ERROR_FS)) - printk (KERN_WARNING - "EXT4-fs warning: mounting fs with errors, " - "running e2fsck is recommended\n"); + printk(KERN_WARNING + "EXT4-fs warning: mounting fs with errors, " + "running e2fsck is recommended\n"); else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 && le16_to_cpu(es->s_mnt_count) >= (unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count)) - printk (KERN_WARNING - "EXT4-fs warning: maximal mount count reached, " - "running e2fsck is recommended\n"); + printk(KERN_WARNING + "EXT4-fs warning: maximal mount count reached, " + "running e2fsck is recommended\n"); else if (le32_to_cpu(es->s_checkinterval) && (le32_to_cpu(es->s_lastcheck) + le32_to_cpu(es->s_checkinterval) <= get_seconds())) - printk (KERN_WARNING - "EXT4-fs warning: checktime reached, " - "running e2fsck is recommended\n"); + printk(KERN_WARNING + "EXT4-fs warning: checktime reached, " + "running e2fsck is recommended\n"); #if 0 /* @@@ We _will_ want to clear the valid bit if we find * inconsistencies, to force a fsck at reboot. But for @@ -1596,16 +1595,14 @@ static int ext4_check_descriptors(struct super_block *sb) (EXT4_BLOCKS_PER_GROUP(sb) - 1); block_bitmap = ext4_block_bitmap(sb, gdp); - if (block_bitmap < first_block || block_bitmap > last_block) - { + if (block_bitmap < first_block || block_bitmap > last_block) { printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: " "Block bitmap for group %lu not in group " "(block %llu)!", i, block_bitmap); return 0; } inode_bitmap = ext4_inode_bitmap(sb, gdp); - if (inode_bitmap < first_block || inode_bitmap > last_block) - { + if (inode_bitmap < first_block || inode_bitmap > last_block) { printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: " "Inode bitmap for group %lu not in group " "(block %llu)!", i, inode_bitmap); @@ -1613,8 +1610,7 @@ static int ext4_check_descriptors(struct super_block *sb) } inode_table = ext4_inode_table(sb, gdp); if (inode_table < first_block || - inode_table + sbi->s_itb_per_group - 1 > last_block) - { + inode_table + sbi->s_itb_per_group - 1 > last_block) { printk(KERN_ERR "EXT4-fs: ext4_check_descriptors: " "Inode table for group %lu not in group " "(block %llu)!", i, inode_table); @@ -1635,7 +1631,7 @@ static int ext4_check_descriptors(struct super_block *sb) } ext4_free_blocks_count_set(sbi->s_es, ext4_count_free_blocks(sb)); - sbi->s_es->s_free_inodes_count=cpu_to_le32(ext4_count_free_inodes(sb)); + sbi->s_es->s_free_inodes_count = cpu_to_le32(ext4_count_free_inodes(sb)); return 1; } @@ -1656,8 +1652,8 @@ static int ext4_check_descriptors(struct super_block *sb) * e2fsck was run on this filesystem, and it must have already done the orphan * inode cleanup for us, so we can safely abort without any further action. */ -static void ext4_orphan_cleanup (struct super_block * sb, - struct ext4_super_block * es) +static void ext4_orphan_cleanup(struct super_block *sb, + struct ext4_super_block *es) { unsigned int s_flags = sb->s_flags; int nr_orphans = 0, nr_truncates = 0; @@ -1734,7 +1730,7 @@ static void ext4_orphan_cleanup (struct super_block * sb, iput(inode); /* The delete magic happens here! */ } -#define PLURAL(x) (x), ((x)==1) ? "" : "s" +#define PLURAL(x) (x), ((x) == 1) ? "" : "s" if (nr_orphans) printk(KERN_INFO "EXT4-fs: %s: %d orphan inode%s deleted\n", @@ -1901,12 +1897,12 @@ static unsigned long ext4_get_stripe_size(struct ext4_sb_info *sbi) return 0; } -static int ext4_fill_super (struct super_block *sb, void *data, int silent) +static int ext4_fill_super(struct super_block *sb, void *data, int silent) __releases(kernel_lock) __acquires(kernel_lock) { - struct buffer_head * bh; + struct buffer_head *bh; struct ext4_super_block *es = NULL; struct ext4_sb_info *sbi; ext4_fsblk_t block; @@ -1955,7 +1951,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) } if (!(bh = sb_bread(sb, logical_sb_block))) { - printk (KERN_ERR "EXT4-fs: unable to read superblock\n"); + printk(KERN_ERR "EXT4-fs: unable to read superblock\n"); goto out_fail; } /* @@ -2028,8 +2024,8 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) set_opt(sbi->s_mount_opt, DELALLOC); - if (!parse_options ((char *) data, sb, &journal_inum, &journal_devnum, - NULL, 0)) + if (!parse_options((char *) data, sb, &journal_inum, &journal_devnum, + NULL, 0)) goto failed_mount; sb->s_flags = (sb->s_flags & ~MS_POSIXACL) | @@ -2104,7 +2100,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) goto failed_mount; } - brelse (bh); + brelse(bh); logical_sb_block = sb_block * EXT4_MIN_BLOCK_SIZE; offset = do_div(logical_sb_block, blocksize); bh = sb_bread(sb, logical_sb_block); @@ -2116,8 +2112,8 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) es = (struct ext4_super_block *)(((char *)bh->b_data) + offset); sbi->s_es = es; if (es->s_magic != cpu_to_le16(EXT4_SUPER_MAGIC)) { - printk (KERN_ERR - "EXT4-fs: Magic mismatch, very weird !\n"); + printk(KERN_ERR + "EXT4-fs: Magic mismatch, very weird !\n"); goto failed_mount; } } @@ -2134,9 +2130,9 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) if ((sbi->s_inode_size < EXT4_GOOD_OLD_INODE_SIZE) || (!is_power_of_2(sbi->s_inode_size)) || (sbi->s_inode_size > blocksize)) { - printk (KERN_ERR - "EXT4-fs: unsupported inode size: %d\n", - sbi->s_inode_size); + printk(KERN_ERR + "EXT4-fs: unsupported inode size: %d\n", + sbi->s_inode_size); goto failed_mount; } if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE) @@ -2168,20 +2164,20 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) sbi->s_mount_state = le16_to_cpu(es->s_state); sbi->s_addr_per_block_bits = ilog2(EXT4_ADDR_PER_BLOCK(sb)); sbi->s_desc_per_block_bits = ilog2(EXT4_DESC_PER_BLOCK(sb)); - for (i=0; i < 4; i++) + for (i = 0; i < 4; i++) sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]); sbi->s_def_hash_version = es->s_def_hash_version; if (sbi->s_blocks_per_group > blocksize * 8) { - printk (KERN_ERR - "EXT4-fs: #blocks per group too big: %lu\n", - sbi->s_blocks_per_group); + printk(KERN_ERR + "EXT4-fs: #blocks per group too big: %lu\n", + sbi->s_blocks_per_group); goto failed_mount; } if (sbi->s_inodes_per_group > blocksize * 8) { - printk (KERN_ERR - "EXT4-fs: #inodes per group too big: %lu\n", - sbi->s_inodes_per_group); + printk(KERN_ERR + "EXT4-fs: #inodes per group too big: %lu\n", + sbi->s_inodes_per_group); goto failed_mount; } @@ -2215,10 +2211,10 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) sbi->s_groups_count = blocks_count; db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) / EXT4_DESC_PER_BLOCK(sb); - sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *), + sbi->s_group_desc = kmalloc(db_count * sizeof(struct buffer_head *), GFP_KERNEL); if (sbi->s_group_desc == NULL) { - printk (KERN_ERR "EXT4-fs: not enough memory\n"); + printk(KERN_ERR "EXT4-fs: not enough memory\n"); goto failed_mount; } @@ -2228,13 +2224,13 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) block = descriptor_loc(sb, logical_sb_block, i); sbi->s_group_desc[i] = sb_bread(sb, block); if (!sbi->s_group_desc[i]) { - printk (KERN_ERR "EXT4-fs: " - "can't read group descriptor %d\n", i); + printk(KERN_ERR "EXT4-fs: " + "can't read group descriptor %d\n", i); db_count = i; goto failed_mount2; } } - if (!ext4_check_descriptors (sb)) { + if (!ext4_check_descriptors(sb)) { printk(KERN_ERR "EXT4-fs: group descriptors corrupted!\n"); goto failed_mount2; } @@ -2310,11 +2306,11 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) EXT4_SB(sb)->s_journal->j_failed_commit) { printk(KERN_CRIT "EXT4-fs error (device %s): " "ext4_fill_super: Journal transaction " - "%u is corrupt\n", sb->s_id, + "%u is corrupt\n", sb->s_id, EXT4_SB(sb)->s_journal->j_failed_commit); - if (test_opt (sb, ERRORS_RO)) { - printk (KERN_CRIT - "Mounting filesystem read-only\n"); + if (test_opt(sb, ERRORS_RO)) { + printk(KERN_CRIT + "Mounting filesystem read-only\n"); sb->s_flags |= MS_RDONLY; EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS; es->s_state |= cpu_to_le16(EXT4_ERROR_FS); @@ -2334,9 +2330,9 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) goto failed_mount3; } else { if (!silent) - printk (KERN_ERR - "ext4: No journal on filesystem on %s\n", - sb->s_id); + printk(KERN_ERR + "ext4: No journal on filesystem on %s\n", + sb->s_id); goto failed_mount3; } @@ -2420,7 +2416,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) goto failed_mount4; } - ext4_setup_super (sb, es, sb->s_flags & MS_RDONLY); + ext4_setup_super(sb, es, sb->s_flags & MS_RDONLY); /* determine the minimum size of new large inodes, if present */ if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE) { @@ -2459,12 +2455,12 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) ext4_orphan_cleanup(sb, es); EXT4_SB(sb)->s_mount_state &= ~EXT4_ORPHAN_FS; if (needs_recovery) - printk (KERN_INFO "EXT4-fs: recovery complete.\n"); + printk(KERN_INFO "EXT4-fs: recovery complete.\n"); ext4_mark_recovery_complete(sb, es); - printk (KERN_INFO "EXT4-fs: mounted filesystem with %s data mode.\n", - test_opt(sb,DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA ? "journal": - test_opt(sb,DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA ? "ordered": - "writeback"); + printk(KERN_INFO "EXT4-fs: mounted filesystem with %s data mode.\n", + test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA ? "journal": + test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA ? "ordered": + "writeback"); if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) { printk(KERN_WARNING "EXT4-fs: Ignoring delalloc option - " @@ -2577,14 +2573,14 @@ static journal_t *ext4_get_journal(struct super_block *sb, static journal_t *ext4_get_dev_journal(struct super_block *sb, dev_t j_dev) { - struct buffer_head * bh; + struct buffer_head *bh; journal_t *journal; ext4_fsblk_t start; ext4_fsblk_t len; int hblock, blocksize; ext4_fsblk_t sb_block; unsigned long offset; - struct ext4_super_block * es; + struct ext4_super_block *es; struct block_device *bdev; bdev = ext4_blkdev_get(j_dev); @@ -2699,8 +2695,8 @@ static int ext4_load_journal(struct super_block *sb, "unavailable, cannot proceed.\n"); return -EROFS; } - printk (KERN_INFO "EXT4-fs: write access will " - "be enabled during recovery.\n"); + printk(KERN_INFO "EXT4-fs: write access will " + "be enabled during recovery.\n"); } } @@ -2753,8 +2749,8 @@ static int ext4_load_journal(struct super_block *sb, return 0; } -static int ext4_create_journal(struct super_block * sb, - struct ext4_super_block * es, +static int ext4_create_journal(struct super_block *sb, + struct ext4_super_block *es, unsigned int journal_inum) { journal_t *journal; @@ -2795,9 +2791,8 @@ static int ext4_create_journal(struct super_block * sb, return 0; } -static void ext4_commit_super (struct super_block * sb, - struct ext4_super_block * es, - int sync) +static void ext4_commit_super(struct super_block *sb, + struct ext4_super_block *es, int sync) { struct buffer_head *sbh = EXT4_SB(sb)->s_sbh; @@ -2818,8 +2813,8 @@ static void ext4_commit_super (struct super_block * sb, * remounting) the filesystem readonly, then we will end up with a * consistent fs on disk. Record that fact. */ -static void ext4_mark_recovery_complete(struct super_block * sb, - struct ext4_super_block * es) +static void ext4_mark_recovery_complete(struct super_block *sb, + struct ext4_super_block *es) { journal_t *journal = EXT4_SB(sb)->s_journal; @@ -2841,8 +2836,8 @@ static void ext4_mark_recovery_complete(struct super_block * sb, * has recorded an error from a previous lifetime, move that error to the * main filesystem now. */ -static void ext4_clear_journal_err(struct super_block * sb, - struct ext4_super_block * es) +static void ext4_clear_journal_err(struct super_block *sb, + struct ext4_super_block *es) { journal_t *journal; int j_errno; @@ -2867,7 +2862,7 @@ static void ext4_clear_journal_err(struct super_block * sb, EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS; es->s_state |= cpu_to_le16(EXT4_ERROR_FS); - ext4_commit_super (sb, es, 1); + ext4_commit_super(sb, es, 1); jbd2_journal_clear_err(journal); } @@ -2900,7 +2895,7 @@ int ext4_force_commit(struct super_block *sb) * This implicitly triggers the writebehind on sync(). */ -static void ext4_write_super (struct super_block * sb) +static void ext4_write_super(struct super_block *sb) { if (mutex_trylock(&sb->s_lock) != 0) BUG(); @@ -2956,9 +2951,9 @@ static void ext4_unlockfs(struct super_block *sb) } } -static int ext4_remount (struct super_block * sb, int * flags, char * data) +static int ext4_remount(struct super_block *sb, int *flags, char *data) { - struct ext4_super_block * es; + struct ext4_super_block *es; struct ext4_sb_info *sbi = EXT4_SB(sb); ext4_fsblk_t n_blocks_count = 0; unsigned long old_sb_flags; @@ -3086,7 +3081,7 @@ static int ext4_remount (struct super_block * sb, int * flags, char * data) sbi->s_mount_state = le16_to_cpu(es->s_state); if ((err = ext4_group_extend(sb, es, n_blocks_count))) goto restore_opts; - if (!ext4_setup_super (sb, es, 0)) + if (!ext4_setup_super(sb, es, 0)) sb->s_flags &= ~MS_RDONLY; } } @@ -3116,7 +3111,7 @@ restore_opts: return err; } -static int ext4_statfs (struct dentry * dentry, struct kstatfs * buf) +static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf) { struct super_block *sb = dentry->d_sb; struct ext4_sb_info *sbi = EXT4_SB(sb); @@ -3354,12 +3349,12 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id, } /* Journaling quota? */ if (EXT4_SB(sb)->s_qf_names[type]) { - /* Quotafile not of fs root? */ + /* Quotafile not in fs root? */ if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode) printk(KERN_WARNING "EXT4-fs: Quota file not on filesystem root. " "Journaled quota will not work.\n"); - } + } /* * When we journal data on quota file, we have to flush journal to see diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 93c5fdcdad2..8954208b489 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1512,7 +1512,7 @@ static inline void ext4_xattr_hash_entry(struct ext4_xattr_header *header, char *name = entry->e_name; int n; - for (n=0; n < entry->e_name_len; n++) { + for (n = 0; n < entry->e_name_len; n++) { hash = (hash << NAME_HASH_SHIFT) ^ (hash >> (8*sizeof(hash) - NAME_HASH_SHIFT)) ^ *name++; -- GitLab From 00b32b7fb671e797bdd2736524a497f18a8df7bf Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 26 Jul 2008 17:33:53 -0400 Subject: [PATCH 0114/1024] ext4: unexport jbd2_journal_update_superblock Remove the unused EXPORT_SYMBOL(jbd2_journal_update_superblock). Signed-off-by: Adrian Bunk Signed-off-by: "Theodore Ts'o" --- fs/jbd2/journal.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index b26c6d9fe6a..8207a01c4ed 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -68,7 +68,6 @@ EXPORT_SYMBOL(jbd2_journal_set_features); EXPORT_SYMBOL(jbd2_journal_create); EXPORT_SYMBOL(jbd2_journal_load); EXPORT_SYMBOL(jbd2_journal_destroy); -EXPORT_SYMBOL(jbd2_journal_update_superblock); EXPORT_SYMBOL(jbd2_journal_abort); EXPORT_SYMBOL(jbd2_journal_errno); EXPORT_SYMBOL(jbd2_journal_ack_err); -- GitLab From f9f6dce01905179d9a209cc1e69fe9047736c112 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Thu, 17 Apr 2008 16:49:43 +1000 Subject: [PATCH 0115/1024] [XFS] Split xfs_dir2_leafn_lookup_int into its two pieces of functionality SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30834a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_dir2_node.c | 358 +++++++++++++++++++++++------------------ 1 file changed, 202 insertions(+), 156 deletions(-) diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c index 8dade711f09..e29b7c63e19 100644 --- a/fs/xfs/xfs_dir2_node.c +++ b/fs/xfs/xfs_dir2_node.c @@ -387,28 +387,26 @@ xfs_dir2_leafn_lasthash( } /* - * Look up a leaf entry in a node-format leaf block. - * If this is an addname then the extrablk in state is a freespace block, - * otherwise it's a data block. + * Look up a leaf entry for space to add a name in a node-format leaf block. + * The extrablk in state is a freespace block. */ -int -xfs_dir2_leafn_lookup_int( +STATIC int +xfs_dir2_leafn_lookup_for_addname( xfs_dabuf_t *bp, /* leaf buffer */ xfs_da_args_t *args, /* operation arguments */ int *indexp, /* out: leaf entry index */ xfs_da_state_t *state) /* state to fill in */ { - xfs_dabuf_t *curbp; /* current data/free buffer */ - xfs_dir2_db_t curdb; /* current data block number */ - xfs_dir2_db_t curfdb; /* current free block number */ - xfs_dir2_data_entry_t *dep; /* data block entry */ + xfs_dabuf_t *curbp = NULL; /* current data/free buffer */ + xfs_dir2_db_t curdb = -1; /* current data block number */ + xfs_dir2_db_t curfdb = -1; /* current free block number */ xfs_inode_t *dp; /* incore directory inode */ int error; /* error return value */ int fi; /* free entry index */ - xfs_dir2_free_t *free=NULL; /* free block structure */ + xfs_dir2_free_t *free = NULL; /* free block structure */ int index; /* leaf entry index */ xfs_dir2_leaf_t *leaf; /* leaf structure */ - int length=0; /* length of new data entry */ + int length; /* length of new data entry */ xfs_dir2_leaf_entry_t *lep; /* leaf entry */ xfs_mount_t *mp; /* filesystem mount point */ xfs_dir2_db_t newdb; /* new data block number */ @@ -431,33 +429,20 @@ xfs_dir2_leafn_lookup_int( /* * Do we have a buffer coming in? */ - if (state->extravalid) + if (state->extravalid) { + /* If so, it's a free block buffer, get the block number. */ curbp = state->extrablk.bp; - else - curbp = NULL; - /* - * For addname, it's a free block buffer, get the block number. - */ - if (args->addname) { - curfdb = curbp ? state->extrablk.blkno : -1; - curdb = -1; - length = xfs_dir2_data_entsize(args->namelen); - if ((free = (curbp ? curbp->data : NULL))) - ASSERT(be32_to_cpu(free->hdr.magic) == XFS_DIR2_FREE_MAGIC); - } - /* - * For others, it's a data block buffer, get the block number. - */ - else { - curfdb = -1; - curdb = curbp ? state->extrablk.blkno : -1; + curfdb = state->extrablk.blkno; + free = curbp->data; + ASSERT(be32_to_cpu(free->hdr.magic) == XFS_DIR2_FREE_MAGIC); } + length = xfs_dir2_data_entsize(args->namelen); /* * Loop over leaf entries with the right hash value. */ - for (lep = &leaf->ents[index]; - index < be16_to_cpu(leaf->hdr.count) && be32_to_cpu(lep->hashval) == args->hashval; - lep++, index++) { + for (lep = &leaf->ents[index]; index < be16_to_cpu(leaf->hdr.count) && + be32_to_cpu(lep->hashval) == args->hashval; + lep++, index++) { /* * Skip stale leaf entries. */ @@ -471,158 +456,218 @@ xfs_dir2_leafn_lookup_int( * For addname, we're looking for a place to put the new entry. * We want to use a data block with an entry of equal * hash value to ours if there is one with room. + * + * If this block isn't the data block we already have + * in hand, take a look at it. */ - if (args->addname) { + if (newdb != curdb) { + curdb = newdb; /* - * If this block isn't the data block we already have - * in hand, take a look at it. + * Convert the data block to the free block + * holding its freespace information. */ - if (newdb != curdb) { - curdb = newdb; - /* - * Convert the data block to the free block - * holding its freespace information. - */ - newfdb = xfs_dir2_db_to_fdb(mp, newdb); - /* - * If it's not the one we have in hand, - * read it in. - */ - if (newfdb != curfdb) { - /* - * If we had one before, drop it. - */ - if (curbp) - xfs_da_brelse(tp, curbp); - /* - * Read the free block. - */ - if ((error = xfs_da_read_buf(tp, dp, - xfs_dir2_db_to_da(mp, - newfdb), - -1, &curbp, - XFS_DATA_FORK))) { - return error; - } - free = curbp->data; - ASSERT(be32_to_cpu(free->hdr.magic) == - XFS_DIR2_FREE_MAGIC); - ASSERT((be32_to_cpu(free->hdr.firstdb) % - XFS_DIR2_MAX_FREE_BESTS(mp)) == - 0); - ASSERT(be32_to_cpu(free->hdr.firstdb) <= curdb); - ASSERT(curdb < - be32_to_cpu(free->hdr.firstdb) + - be32_to_cpu(free->hdr.nvalid)); - } - /* - * Get the index for our entry. - */ - fi = xfs_dir2_db_to_fdindex(mp, curdb); - /* - * If it has room, return it. - */ - if (unlikely(be16_to_cpu(free->bests[fi]) == NULLDATAOFF)) { - XFS_ERROR_REPORT("xfs_dir2_leafn_lookup_int", - XFS_ERRLEVEL_LOW, mp); - if (curfdb != newfdb) - xfs_da_brelse(tp, curbp); - return XFS_ERROR(EFSCORRUPTED); - } - curfdb = newfdb; - if (be16_to_cpu(free->bests[fi]) >= length) { - *indexp = index; - state->extravalid = 1; - state->extrablk.bp = curbp; - state->extrablk.blkno = curfdb; - state->extrablk.index = fi; - state->extrablk.magic = - XFS_DIR2_FREE_MAGIC; - ASSERT(args->oknoent); - return XFS_ERROR(ENOENT); - } - } - } - /* - * Not adding a new entry, so we really want to find - * the name given to us. - */ - else { + newfdb = xfs_dir2_db_to_fdb(mp, newdb); /* - * If it's a different data block, go get it. + * If it's not the one we have in hand, read it in. */ - if (newdb != curdb) { + if (newfdb != curfdb) { /* - * If we had a block before, drop it. + * If we had one before, drop it. */ if (curbp) xfs_da_brelse(tp, curbp); /* - * Read the data block. + * Read the free block. */ - if ((error = - xfs_da_read_buf(tp, dp, - xfs_dir2_db_to_da(mp, newdb), -1, - &curbp, XFS_DATA_FORK))) { + error = xfs_da_read_buf(tp, dp, + xfs_dir2_db_to_da(mp, newfdb), + -1, &curbp, XFS_DATA_FORK); + if (error) return error; - } - xfs_dir2_data_check(dp, curbp); - curdb = newdb; + free = curbp->data; + ASSERT(be32_to_cpu(free->hdr.magic) == + XFS_DIR2_FREE_MAGIC); + ASSERT((be32_to_cpu(free->hdr.firstdb) % + XFS_DIR2_MAX_FREE_BESTS(mp)) == 0); + ASSERT(be32_to_cpu(free->hdr.firstdb) <= curdb); + ASSERT(curdb < be32_to_cpu(free->hdr.firstdb) + + be32_to_cpu(free->hdr.nvalid)); } /* - * Point to the data entry. + * Get the index for our entry. */ - dep = (xfs_dir2_data_entry_t *) - ((char *)curbp->data + - xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address))); + fi = xfs_dir2_db_to_fdindex(mp, curdb); /* - * Compare the entry, return it if it matches. + * If it has room, return it. */ - if (dep->namelen == args->namelen && - dep->name[0] == args->name[0] && - memcmp(dep->name, args->name, args->namelen) == 0) { - args->inumber = be64_to_cpu(dep->inumber); - *indexp = index; - state->extravalid = 1; - state->extrablk.bp = curbp; - state->extrablk.blkno = curdb; - state->extrablk.index = - (int)((char *)dep - - (char *)curbp->data); - state->extrablk.magic = XFS_DIR2_DATA_MAGIC; - return XFS_ERROR(EEXIST); + if (unlikely(be16_to_cpu(free->bests[fi]) == NULLDATAOFF)) { + XFS_ERROR_REPORT("xfs_dir2_leafn_lookup_int", + XFS_ERRLEVEL_LOW, mp); + if (curfdb != newfdb) + xfs_da_brelse(tp, curbp); + return XFS_ERROR(EFSCORRUPTED); } + curfdb = newfdb; + if (be16_to_cpu(free->bests[fi]) >= length) + goto out; } } + /* Didn't find any space */ + fi = -1; +out: + ASSERT(args->oknoent); + if (curbp) { + /* Giving back a free block. */ + state->extravalid = 1; + state->extrablk.bp = curbp; + state->extrablk.index = fi; + state->extrablk.blkno = curfdb; + state->extrablk.magic = XFS_DIR2_FREE_MAGIC; + } else { + state->extravalid = 0; + } /* - * Didn't find a match. - * If we are holding a buffer, give it back in case our caller - * finds it useful. + * Return the index, that will be the insertion point. */ - if ((state->extravalid = (curbp != NULL))) { - state->extrablk.bp = curbp; - state->extrablk.index = -1; + *indexp = index; + return XFS_ERROR(ENOENT); +} + +/* + * Look up a leaf entry in a node-format leaf block. + * The extrablk in state a data block. + */ +STATIC int +xfs_dir2_leafn_lookup_for_entry( + xfs_dabuf_t *bp, /* leaf buffer */ + xfs_da_args_t *args, /* operation arguments */ + int *indexp, /* out: leaf entry index */ + xfs_da_state_t *state) /* state to fill in */ +{ + xfs_dabuf_t *curbp = NULL; /* current data/free buffer */ + xfs_dir2_db_t curdb = -1; /* current data block number */ + xfs_dir2_data_entry_t *dep; /* data block entry */ + xfs_inode_t *dp; /* incore directory inode */ + int error; /* error return value */ + int di; /* data entry index */ + int index; /* leaf entry index */ + xfs_dir2_leaf_t *leaf; /* leaf structure */ + xfs_dir2_leaf_entry_t *lep; /* leaf entry */ + xfs_mount_t *mp; /* filesystem mount point */ + xfs_dir2_db_t newdb; /* new data block number */ + xfs_trans_t *tp; /* transaction pointer */ + + dp = args->dp; + tp = args->trans; + mp = dp->i_mount; + leaf = bp->data; + ASSERT(be16_to_cpu(leaf->hdr.info.magic) == XFS_DIR2_LEAFN_MAGIC); +#ifdef __KERNEL__ + ASSERT(be16_to_cpu(leaf->hdr.count) > 0); +#endif + xfs_dir2_leafn_check(dp, bp); + /* + * Look up the hash value in the leaf entries. + */ + index = xfs_dir2_leaf_search_hash(args, bp); + /* + * Do we have a buffer coming in? + */ + if (state->extravalid) { + curbp = state->extrablk.bp; + curdb = state->extrablk.blkno; + } + /* + * Loop over leaf entries with the right hash value. + */ + for (lep = &leaf->ents[index]; index < be16_to_cpu(leaf->hdr.count) && + be32_to_cpu(lep->hashval) == args->hashval; + lep++, index++) { + /* + * Skip stale leaf entries. + */ + if (be32_to_cpu(lep->address) == XFS_DIR2_NULL_DATAPTR) + continue; + /* + * Pull the data block number from the entry. + */ + newdb = xfs_dir2_dataptr_to_db(mp, be32_to_cpu(lep->address)); /* - * For addname, giving back a free block. + * Not adding a new entry, so we really want to find + * the name given to us. + * + * If it's a different data block, go get it. */ - if (args->addname) { - state->extrablk.blkno = curfdb; - state->extrablk.magic = XFS_DIR2_FREE_MAGIC; + if (newdb != curdb) { + /* + * If we had a block before, drop it. + */ + if (curbp) + xfs_da_brelse(tp, curbp); + /* + * Read the data block. + */ + error = xfs_da_read_buf(tp, dp, xfs_dir2_db_to_da(mp, + newdb), -1, &curbp, XFS_DATA_FORK); + if (error) + return error; + xfs_dir2_data_check(dp, curbp); + curdb = newdb; } /* - * For other callers, giving back a data block. + * Point to the data entry. */ - else { - state->extrablk.blkno = curdb; - state->extrablk.magic = XFS_DIR2_DATA_MAGIC; + dep = (xfs_dir2_data_entry_t *)((char *)curbp->data + + xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address))); + /* + * Compare the entry, return it if it matches. + */ + if (dep->namelen == args->namelen && memcmp(dep->name, + args->name, args->namelen) == 0) { + args->inumber = be64_to_cpu(dep->inumber); + di = (int)((char *)dep - (char *)curbp->data); + error = EEXIST; + goto out; } } + /* Didn't find a match. */ + error = ENOENT; + di = -1; + ASSERT(index == be16_to_cpu(leaf->hdr.count) || args->oknoent); +out: + if (curbp) { + /* Giving back a data block. */ + state->extravalid = 1; + state->extrablk.bp = curbp; + state->extrablk.index = di; + state->extrablk.blkno = curdb; + state->extrablk.magic = XFS_DIR2_DATA_MAGIC; + } else { + state->extravalid = 0; + } /* - * Return the final index, that will be the insertion point. + * Return the index, that will be the insertion point. */ *indexp = index; - ASSERT(index == be16_to_cpu(leaf->hdr.count) || args->oknoent); - return XFS_ERROR(ENOENT); + return XFS_ERROR(error); +} + +/* + * Look up a leaf entry in a node-format leaf block. + * If this is an addname then the extrablk in state is a freespace block, + * otherwise it's a data block. + */ +int +xfs_dir2_leafn_lookup_int( + xfs_dabuf_t *bp, /* leaf buffer */ + xfs_da_args_t *args, /* operation arguments */ + int *indexp, /* out: leaf entry index */ + xfs_da_state_t *state) /* state to fill in */ +{ + if (args->addname) + return xfs_dir2_leafn_lookup_for_addname(bp, args, indexp, + state); + return xfs_dir2_leafn_lookup_for_entry(bp, args, indexp, state); } /* @@ -823,9 +868,10 @@ xfs_dir2_leafn_rebalance( */ if (!state->inleaf) blk2->index = blk1->index - be16_to_cpu(leaf1->hdr.count); - - /* - * Finally sanity check just to make sure we are not returning a negative index + + /* + * Finally sanity check just to make sure we are not returning a + * negative index */ if(blk2->index < 0) { state->inleaf = 1; -- GitLab From 7c12f296500e1157872ef45b3f3bb06b4b73f1c1 Mon Sep 17 00:00:00 2001 From: Tim Shimmin Date: Wed, 30 Apr 2008 18:15:28 +1000 Subject: [PATCH 0116/1024] [XFS] Fix up noattr2 so that it will properly update the versionnum and features2 fields. Previously, mounting with noattr2 failed to achieve anything because although it cleared the attr2 mount flag, it would set it again as soon as it processed the superblock fields. The fix now has an explicit noattr2 flag and uses it later to fix up the versionnum and features2 fields. SGI-PV: 980021 SGI-Modid: xfs-linux-melb:xfs-kern:31003a Signed-off-by: Tim Shimmin Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 1 + fs/xfs/xfs_clnt.h | 1 + fs/xfs/xfs_mount.c | 12 +++++++++++- fs/xfs/xfs_mount.h | 1 + fs/xfs/xfs_sb.h | 7 +++++++ fs/xfs/xfs_vfsops.c | 9 ++++++++- 6 files changed, 29 insertions(+), 2 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 943381284e2..1b60e46f527 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -314,6 +314,7 @@ xfs_parseargs( args->flags |= XFSMNT_ATTR2; } else if (!strcmp(this_char, MNTOPT_NOATTR2)) { args->flags &= ~XFSMNT_ATTR2; + args->flags |= XFSMNT_NOATTR2; } else if (!strcmp(this_char, MNTOPT_FILESTREAM)) { args->flags2 |= XFSMNT2_FILESTREAMS; } else if (!strcmp(this_char, MNTOPT_NOQUOTA)) { diff --git a/fs/xfs/xfs_clnt.h b/fs/xfs/xfs_clnt.h index d5d1e60ee22..d2ce5dd70d8 100644 --- a/fs/xfs/xfs_clnt.h +++ b/fs/xfs/xfs_clnt.h @@ -78,6 +78,7 @@ struct xfs_mount_args { #define XFSMNT_IOSIZE 0x00002000 /* optimize for I/O size */ #define XFSMNT_OSYNCISOSYNC 0x00004000 /* o_sync is REALLY o_sync */ /* (osyncisdsync is default) */ +#define XFSMNT_NOATTR2 0x00008000 /* turn off ATTR2 EA format */ #define XFSMNT_32BITINODES 0x00200000 /* restrict inodes to 32 * bits of address space */ #define XFSMNT_GQUOTA 0x00400000 /* group quota accounting */ diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index da3988453b7..361c7a755a0 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -994,9 +994,19 @@ xfs_mountfs( * Re-check for ATTR2 in case it was found in bad_features2 * slot. */ - if (xfs_sb_version_hasattr2(&mp->m_sb)) + if (xfs_sb_version_hasattr2(&mp->m_sb) && + !(mp->m_flags & XFS_MOUNT_NOATTR2)) mp->m_flags |= XFS_MOUNT_ATTR2; + } + + if (xfs_sb_version_hasattr2(&mp->m_sb) && + (mp->m_flags & XFS_MOUNT_NOATTR2)) { + xfs_sb_version_removeattr2(&mp->m_sb); + update_flags |= XFS_SB_FEATURES2; + /* update sb_versionnum for the clearing of the morebits */ + if (!sbp->sb_features2) + update_flags |= XFS_SB_VERSIONNUM; } /* diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index 63e0693a358..4aff0c125ad 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -378,6 +378,7 @@ typedef struct xfs_mount { counters */ #define XFS_MOUNT_FILESTREAMS (1ULL << 24) /* enable the filestreams allocator */ +#define XFS_MOUNT_NOATTR2 (1ULL << 25) /* disable use of attr2 format */ /* diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h index d904efe7f87..e3204a36a22 100644 --- a/fs/xfs/xfs_sb.h +++ b/fs/xfs/xfs_sb.h @@ -473,6 +473,13 @@ static inline void xfs_sb_version_addattr2(xfs_sb_t *sbp) ((sbp)->sb_features2 | XFS_SB_VERSION2_ATTR2BIT))); } +static inline void xfs_sb_version_removeattr2(xfs_sb_t *sbp) +{ + sbp->sb_features2 &= ~XFS_SB_VERSION2_ATTR2BIT; + if (!sbp->sb_features2) + sbp->sb_versionnum &= ~XFS_SB_VERSION_MOREBITSBIT; +} + /* * end of superblock version macros */ diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c index 30bacd8bb0e..bbc911720d8 100644 --- a/fs/xfs/xfs_vfsops.c +++ b/fs/xfs/xfs_vfsops.c @@ -284,6 +284,8 @@ xfs_start_flags( mp->m_flags |= XFS_MOUNT_DIRSYNC; if (ap->flags & XFSMNT_ATTR2) mp->m_flags |= XFS_MOUNT_ATTR2; + if (ap->flags & XFSMNT_NOATTR2) + mp->m_flags |= XFS_MOUNT_NOATTR2; if (ap->flags2 & XFSMNT2_COMPAT_IOSIZE) mp->m_flags |= XFS_MOUNT_COMPAT_IOSIZE; @@ -346,7 +348,12 @@ xfs_finish_flags( } } - if (xfs_sb_version_hasattr2(&mp->m_sb)) + /* + * mkfs'ed attr2 will turn on attr2 mount unless explicitly + * told by noattr2 to turn it off + */ + if (xfs_sb_version_hasattr2(&mp->m_sb) && + !(ap->flags & XFSMNT_NOATTR2)) mp->m_flags |= XFS_MOUNT_ATTR2; /* -- GitLab From f0e2d93c29dc39ffd24cac180a19d48f700c0706 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Mon, 19 May 2008 16:31:57 +1000 Subject: [PATCH 0117/1024] [XFS] Remove unused arg from kmem_free() kmem_free() function takes (ptr, size) arguments but doesn't actually use second one. This patch removes size argument from all callsites. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31050a Signed-off-by: Denys Vlasenko Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/kmem.c | 4 ++-- fs/xfs/linux-2.6/kmem.h | 2 +- fs/xfs/linux-2.6/xfs_buf.c | 9 ++++----- fs/xfs/linux-2.6/xfs_super.c | 8 ++++---- fs/xfs/quota/xfs_dquot_item.c | 4 ++-- fs/xfs/quota/xfs_qm.c | 12 ++++++------ fs/xfs/quota/xfs_qm_syscalls.c | 8 ++++---- fs/xfs/support/ktrace.c | 4 ++-- fs/xfs/xfs_attr_leaf.c | 18 +++++++++--------- fs/xfs/xfs_bmap.c | 2 +- fs/xfs/xfs_buf_item.c | 8 ++++---- fs/xfs/xfs_da_btree.c | 22 +++++++++++----------- fs/xfs/xfs_dfrag.c | 4 ++-- fs/xfs/xfs_dir2.c | 6 +++--- fs/xfs/xfs_dir2_block.c | 6 +++--- fs/xfs/xfs_dir2_leaf.c | 2 +- fs/xfs/xfs_dir2_sf.c | 8 ++++---- fs/xfs/xfs_error.c | 5 ++--- fs/xfs/xfs_extfree_item.c | 6 ++---- fs/xfs/xfs_inode.c | 34 ++++++++++++++++------------------ fs/xfs/xfs_inode_item.c | 7 +++---- fs/xfs/xfs_itable.c | 6 +++--- fs/xfs/xfs_log.c | 4 ++-- fs/xfs/xfs_log_recover.c | 21 ++++++++------------- fs/xfs/xfs_mount.c | 18 +++++++----------- fs/xfs/xfs_mru_cache.c | 8 ++++---- fs/xfs/xfs_rtalloc.c | 2 +- fs/xfs/xfs_trans.c | 4 ++-- fs/xfs/xfs_trans_inode.c | 2 +- fs/xfs/xfs_trans_item.c | 8 ++++---- fs/xfs/xfs_vfsops.c | 8 ++++---- 31 files changed, 122 insertions(+), 138 deletions(-) diff --git a/fs/xfs/linux-2.6/kmem.c b/fs/xfs/linux-2.6/kmem.c index 9b1bb17a050..69233a52f0a 100644 --- a/fs/xfs/linux-2.6/kmem.c +++ b/fs/xfs/linux-2.6/kmem.c @@ -90,7 +90,7 @@ kmem_zalloc_greedy(size_t *size, size_t minsize, size_t maxsize, } void -kmem_free(void *ptr, size_t size) +kmem_free(void *ptr) { if (!is_vmalloc_addr(ptr)) { kfree(ptr); @@ -110,7 +110,7 @@ kmem_realloc(void *ptr, size_t newsize, size_t oldsize, if (new) memcpy(new, ptr, ((oldsize < newsize) ? oldsize : newsize)); - kmem_free(ptr, oldsize); + kmem_free(ptr); } return new; } diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/linux-2.6/kmem.h index a20683cf74d..a3c96207e60 100644 --- a/fs/xfs/linux-2.6/kmem.h +++ b/fs/xfs/linux-2.6/kmem.h @@ -58,7 +58,7 @@ extern void *kmem_alloc(size_t, unsigned int __nocast); extern void *kmem_zalloc(size_t, unsigned int __nocast); extern void *kmem_zalloc_greedy(size_t *, size_t, size_t, unsigned int __nocast); extern void *kmem_realloc(void *, size_t, size_t, unsigned int __nocast); -extern void kmem_free(void *, size_t); +extern void kmem_free(void *); /* * Zone interfaces diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c index 98e0e86093b..ed03c6d3c9c 100644 --- a/fs/xfs/linux-2.6/xfs_buf.c +++ b/fs/xfs/linux-2.6/xfs_buf.c @@ -310,8 +310,7 @@ _xfs_buf_free_pages( xfs_buf_t *bp) { if (bp->b_pages != bp->b_page_array) { - kmem_free(bp->b_pages, - bp->b_page_count * sizeof(struct page *)); + kmem_free(bp->b_pages); } } @@ -1398,7 +1397,7 @@ STATIC void xfs_free_bufhash( xfs_buftarg_t *btp) { - kmem_free(btp->bt_hash, (1<bt_hashshift) * sizeof(xfs_bufhash_t)); + kmem_free(btp->bt_hash); btp->bt_hash = NULL; } @@ -1444,7 +1443,7 @@ xfs_free_buftarg( xfs_unregister_buftarg(btp); kthread_stop(btp->bt_task); - kmem_free(btp, sizeof(*btp)); + kmem_free(btp); } STATIC int @@ -1575,7 +1574,7 @@ xfs_alloc_buftarg( return btp; error: - kmem_free(btp, sizeof(*btp)); + kmem_free(btp); return NULL; } diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 1b60e46f527..5c7144bc310 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1074,7 +1074,7 @@ xfssyncd( list_del(&work->w_list); if (work == &mp->m_sync_work) continue; - kmem_free(work, sizeof(struct bhv_vfs_sync_work)); + kmem_free(work); } } @@ -1222,7 +1222,7 @@ xfs_fs_remount( error = xfs_parseargs(mp, options, args, 1); if (!error) error = xfs_mntupdate(mp, flags, args); - kmem_free(args, sizeof(*args)); + kmem_free(args); return -error; } @@ -1369,7 +1369,7 @@ xfs_fs_fill_super( xfs_itrace_exit(XFS_I(sb->s_root->d_inode)); - kmem_free(args, sizeof(*args)); + kmem_free(args); return 0; fail_vnrele: @@ -1384,7 +1384,7 @@ fail_unmount: xfs_unmount(mp, 0, NULL); fail_vfsop: - kmem_free(args, sizeof(*args)); + kmem_free(args); return -error; } diff --git a/fs/xfs/quota/xfs_dquot_item.c b/fs/xfs/quota/xfs_dquot_item.c index 36e05ca7841..08d2fc89e6a 100644 --- a/fs/xfs/quota/xfs_dquot_item.c +++ b/fs/xfs/quota/xfs_dquot_item.c @@ -576,8 +576,8 @@ xfs_qm_qoffend_logitem_committed( * xfs_trans_delete_ail() drops the AIL lock. */ xfs_trans_delete_ail(qfs->qql_item.li_mountp, (xfs_log_item_t *)qfs); - kmem_free(qfs, sizeof(xfs_qoff_logitem_t)); - kmem_free(qfe, sizeof(xfs_qoff_logitem_t)); + kmem_free(qfs); + kmem_free(qfe); return (xfs_lsn_t)-1; } diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c index d31cce1165c..cde5c508f0e 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/quota/xfs_qm.c @@ -192,8 +192,8 @@ xfs_qm_destroy( xfs_qm_list_destroy(&(xqm->qm_usr_dqhtable[i])); xfs_qm_list_destroy(&(xqm->qm_grp_dqhtable[i])); } - kmem_free(xqm->qm_usr_dqhtable, hsize * sizeof(xfs_dqhash_t)); - kmem_free(xqm->qm_grp_dqhtable, hsize * sizeof(xfs_dqhash_t)); + kmem_free(xqm->qm_usr_dqhtable); + kmem_free(xqm->qm_grp_dqhtable); xqm->qm_usr_dqhtable = NULL; xqm->qm_grp_dqhtable = NULL; xqm->qm_dqhashmask = 0; @@ -201,7 +201,7 @@ xfs_qm_destroy( #ifdef DEBUG mutex_destroy(&qcheck_lock); #endif - kmem_free(xqm, sizeof(xfs_qm_t)); + kmem_free(xqm); } /* @@ -1134,7 +1134,7 @@ xfs_qm_init_quotainfo( * and change the superblock accordingly. */ if ((error = xfs_qm_init_quotainos(mp))) { - kmem_free(qinf, sizeof(xfs_quotainfo_t)); + kmem_free(qinf); mp->m_quotainfo = NULL; return error; } @@ -1248,7 +1248,7 @@ xfs_qm_destroy_quotainfo( qi->qi_gquotaip = NULL; } mutex_destroy(&qi->qi_quotaofflock); - kmem_free(qi, sizeof(xfs_quotainfo_t)); + kmem_free(qi); mp->m_quotainfo = NULL; } @@ -1623,7 +1623,7 @@ xfs_qm_dqiterate( break; } while (nmaps > 0); - kmem_free(map, XFS_DQITER_MAP_SIZE * sizeof(*map)); + kmem_free(map); return error; } diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c index 768a3b27d2b..413671523cb 100644 --- a/fs/xfs/quota/xfs_qm_syscalls.c +++ b/fs/xfs/quota/xfs_qm_syscalls.c @@ -1449,14 +1449,14 @@ xfs_qm_internalqcheck( for (d = (xfs_dqtest_t *) h1->qh_next; d != NULL; ) { xfs_dqtest_cmp(d); e = (xfs_dqtest_t *) d->HL_NEXT; - kmem_free(d, sizeof(xfs_dqtest_t)); + kmem_free(d); d = e; } h1 = &qmtest_gdqtab[i]; for (d = (xfs_dqtest_t *) h1->qh_next; d != NULL; ) { xfs_dqtest_cmp(d); e = (xfs_dqtest_t *) d->HL_NEXT; - kmem_free(d, sizeof(xfs_dqtest_t)); + kmem_free(d); d = e; } } @@ -1467,8 +1467,8 @@ xfs_qm_internalqcheck( } else { cmn_err(CE_DEBUG, "******** quotacheck successful! ********"); } - kmem_free(qmtest_udqtab, qmtest_hashmask * sizeof(xfs_dqhash_t)); - kmem_free(qmtest_gdqtab, qmtest_hashmask * sizeof(xfs_dqhash_t)); + kmem_free(qmtest_udqtab); + kmem_free(qmtest_gdqtab); mutex_unlock(&qcheck_lock); return (qmtest_nfails); } diff --git a/fs/xfs/support/ktrace.c b/fs/xfs/support/ktrace.c index 0b75d302508..a34ef05489b 100644 --- a/fs/xfs/support/ktrace.c +++ b/fs/xfs/support/ktrace.c @@ -89,7 +89,7 @@ ktrace_alloc(int nentries, unsigned int __nocast sleep) if (sleep & KM_SLEEP) panic("ktrace_alloc: NULL memory on KM_SLEEP request!"); - kmem_free(ktp, sizeof(*ktp)); + kmem_free(ktp); return NULL; } @@ -126,7 +126,7 @@ ktrace_free(ktrace_t *ktp) } else { entries_size = (int)(ktp->kt_nentries * sizeof(ktrace_entry_t)); - kmem_free(ktp->kt_entries, entries_size); + kmem_free(ktp->kt_entries); } kmem_zone_free(ktrace_hdr_zone, ktp); diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 303d41e4217..a85e9caf015 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -555,7 +555,7 @@ xfs_attr_shortform_to_leaf(xfs_da_args_t *args) out: if(bp) xfs_da_buf_done(bp); - kmem_free(tmpbuffer, size); + kmem_free(tmpbuffer); return(error); } @@ -676,7 +676,7 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) XFS_ERRLEVEL_LOW, context->dp->i_mount, sfe); xfs_attr_trace_l_c("sf corrupted", context); - kmem_free(sbuf, sbsize); + kmem_free(sbuf); return XFS_ERROR(EFSCORRUPTED); } if (!xfs_attr_namesp_match_overrides(context->flags, sfe->flags)) { @@ -717,7 +717,7 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) } } if (i == nsbuf) { - kmem_free(sbuf, sbsize); + kmem_free(sbuf); xfs_attr_trace_l_c("blk end", context); return(0); } @@ -747,7 +747,7 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) cursor->offset++; } - kmem_free(sbuf, sbsize); + kmem_free(sbuf); xfs_attr_trace_l_c("sf E-O-F", context); return(0); } @@ -873,7 +873,7 @@ xfs_attr_leaf_to_shortform(xfs_dabuf_t *bp, xfs_da_args_t *args, int forkoff) error = 0; out: - kmem_free(tmpbuffer, XFS_LBSIZE(dp->i_mount)); + kmem_free(tmpbuffer); return(error); } @@ -1271,7 +1271,7 @@ xfs_attr_leaf_compact(xfs_trans_t *trans, xfs_dabuf_t *bp) be16_to_cpu(hdr_s->count), mp); xfs_da_log_buf(trans, bp, 0, XFS_LBSIZE(mp) - 1); - kmem_free(tmpbuffer, XFS_LBSIZE(mp)); + kmem_free(tmpbuffer); } /* @@ -1921,7 +1921,7 @@ xfs_attr_leaf_unbalance(xfs_da_state_t *state, xfs_da_state_blk_t *drop_blk, be16_to_cpu(drop_hdr->count), mp); } memcpy((char *)save_leaf, (char *)tmp_leaf, state->blocksize); - kmem_free(tmpbuffer, state->blocksize); + kmem_free(tmpbuffer); } xfs_da_log_buf(state->args->trans, save_blk->bp, 0, @@ -2451,7 +2451,7 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context) (int)name_rmt->namelen, valuelen, (char*)args.value); - kmem_free(args.value, valuelen); + kmem_free(args.value); } else { retval = context->put_listent(context, @@ -2954,7 +2954,7 @@ xfs_attr_leaf_inactive(xfs_trans_t **trans, xfs_inode_t *dp, xfs_dabuf_t *bp) error = tmp; /* save only the 1st errno */ } - kmem_free((xfs_caddr_t)list, size); + kmem_free((xfs_caddr_t)list); return(error); } diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index 53c259f5a5a..a612a90aae4 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -5970,7 +5970,7 @@ unlock_and_return: xfs_iunlock_map_shared(ip, lock); xfs_iunlock(ip, XFS_IOLOCK_SHARED); - kmem_free(map, subnex * sizeof(*map)); + kmem_free(map); return error; } diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index 53a71c62025..d86ca2c03a7 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -889,9 +889,9 @@ xfs_buf_item_relse( } #ifdef XFS_TRANS_DEBUG - kmem_free(bip->bli_orig, XFS_BUF_COUNT(bp)); + kmem_free(bip->bli_orig); bip->bli_orig = NULL; - kmem_free(bip->bli_logged, XFS_BUF_COUNT(bp) / NBBY); + kmem_free(bip->bli_logged); bip->bli_logged = NULL; #endif /* XFS_TRANS_DEBUG */ @@ -1138,9 +1138,9 @@ xfs_buf_iodone( xfs_trans_delete_ail(mp, (xfs_log_item_t *)bip); #ifdef XFS_TRANS_DEBUG - kmem_free(bip->bli_orig, XFS_BUF_COUNT(bp)); + kmem_free(bip->bli_orig); bip->bli_orig = NULL; - kmem_free(bip->bli_logged, XFS_BUF_COUNT(bp) / NBBY); + kmem_free(bip->bli_logged); bip->bli_logged = NULL; #endif /* XFS_TRANS_DEBUG */ diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index 021a8f7e563..294780427ab 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -1598,7 +1598,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) args->firstblock, args->total, &mapp[mapi], &nmap, args->flist, NULL))) { - kmem_free(mapp, sizeof(*mapp) * count); + kmem_free(mapp); return error; } if (nmap < 1) @@ -1620,11 +1620,11 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) mapp[mapi - 1].br_startoff + mapp[mapi - 1].br_blockcount != bno + count) { if (mapp != &map) - kmem_free(mapp, sizeof(*mapp) * count); + kmem_free(mapp); return XFS_ERROR(ENOSPC); } if (mapp != &map) - kmem_free(mapp, sizeof(*mapp) * count); + kmem_free(mapp); *new_blkno = (xfs_dablk_t)bno; return 0; } @@ -2090,10 +2090,10 @@ xfs_da_do_buf( } } if (bplist) { - kmem_free(bplist, sizeof(*bplist) * nmap); + kmem_free(bplist); } if (mapp != &map) { - kmem_free(mapp, sizeof(*mapp) * nfsb); + kmem_free(mapp); } if (bpp) *bpp = rbp; @@ -2102,11 +2102,11 @@ exit1: if (bplist) { for (i = 0; i < nbplist; i++) xfs_trans_brelse(trans, bplist[i]); - kmem_free(bplist, sizeof(*bplist) * nmap); + kmem_free(bplist); } exit0: if (mapp != &map) - kmem_free(mapp, sizeof(*mapp) * nfsb); + kmem_free(mapp); if (bpp) *bpp = NULL; return error; @@ -2315,7 +2315,7 @@ xfs_da_buf_done(xfs_dabuf_t *dabuf) if (dabuf->dirty) xfs_da_buf_clean(dabuf); if (dabuf->nbuf > 1) - kmem_free(dabuf->data, BBTOB(dabuf->bbcount)); + kmem_free(dabuf->data); #ifdef XFS_DABUF_DEBUG { spin_lock(&xfs_dabuf_global_lock); @@ -2332,7 +2332,7 @@ xfs_da_buf_done(xfs_dabuf_t *dabuf) if (dabuf->nbuf == 1) kmem_zone_free(xfs_dabuf_zone, dabuf); else - kmem_free(dabuf, XFS_DA_BUF_SIZE(dabuf->nbuf)); + kmem_free(dabuf); } /* @@ -2403,7 +2403,7 @@ xfs_da_brelse(xfs_trans_t *tp, xfs_dabuf_t *dabuf) for (i = 0; i < nbuf; i++) xfs_trans_brelse(tp, bplist[i]); if (bplist != &bp) - kmem_free(bplist, nbuf * sizeof(*bplist)); + kmem_free(bplist); } /* @@ -2429,7 +2429,7 @@ xfs_da_binval(xfs_trans_t *tp, xfs_dabuf_t *dabuf) for (i = 0; i < nbuf; i++) xfs_trans_binval(tp, bplist[i]); if (bplist != &bp) - kmem_free(bplist, nbuf * sizeof(*bplist)); + kmem_free(bplist); } /* diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c index 5f3647cb988..2211e885ef2 100644 --- a/fs/xfs/xfs_dfrag.c +++ b/fs/xfs/xfs_dfrag.c @@ -116,7 +116,7 @@ xfs_swapext( out_put_file: fput(file); out_free_sxp: - kmem_free(sxp, sizeof(xfs_swapext_t)); + kmem_free(sxp); out: return error; } @@ -381,6 +381,6 @@ xfs_swap_extents( xfs_iunlock(tip, lock_flags); } if (tempifp != NULL) - kmem_free(tempifp, sizeof(xfs_ifork_t)); + kmem_free(tempifp); return error; } diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index 7cb26529766..0284af1734b 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -493,7 +493,7 @@ xfs_dir2_grow_inode( args->firstblock, args->total, &mapp[mapi], &nmap, args->flist, NULL))) { - kmem_free(mapp, sizeof(*mapp) * count); + kmem_free(mapp); return error; } if (nmap < 1) @@ -525,14 +525,14 @@ xfs_dir2_grow_inode( mapp[mapi - 1].br_startoff + mapp[mapi - 1].br_blockcount != bno + count) { if (mapp != &map) - kmem_free(mapp, sizeof(*mapp) * count); + kmem_free(mapp); return XFS_ERROR(ENOSPC); } /* * Done with the temporary mapping table. */ if (mapp != &map) - kmem_free(mapp, sizeof(*mapp) * count); + kmem_free(mapp); *dbp = xfs_dir2_da_to_db(mp, (xfs_dablk_t)bno); /* * Update file's size if this is the data space and it grew. diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c index fb5a556725b..e8a7aca5fe2 100644 --- a/fs/xfs/xfs_dir2_block.c +++ b/fs/xfs/xfs_dir2_block.c @@ -1071,7 +1071,7 @@ xfs_dir2_sf_to_block( */ error = xfs_dir2_grow_inode(args, XFS_DIR2_DATA_SPACE, &blkno); if (error) { - kmem_free(buf, buf_len); + kmem_free(buf); return error; } /* @@ -1079,7 +1079,7 @@ xfs_dir2_sf_to_block( */ error = xfs_dir2_data_init(args, blkno, &bp); if (error) { - kmem_free(buf, buf_len); + kmem_free(buf); return error; } block = bp->data; @@ -1198,7 +1198,7 @@ xfs_dir2_sf_to_block( sfep = xfs_dir2_sf_nextentry(sfp, sfep); } /* Done with the temporary buffer */ - kmem_free(buf, buf_len); + kmem_free(buf); /* * Sort the leaf entries by hash value. */ diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index bc52b803d79..e33433408e4 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -1110,7 +1110,7 @@ xfs_dir2_leaf_getdents( *offset = XFS_DIR2_MAX_DATAPTR; else *offset = xfs_dir2_byte_to_dataptr(mp, curoff); - kmem_free(map, map_size * sizeof(*map)); + kmem_free(map); if (bp) xfs_da_brelse(NULL, bp); return error; diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c index 919d275a1ce..ca33bc62edc 100644 --- a/fs/xfs/xfs_dir2_sf.c +++ b/fs/xfs/xfs_dir2_sf.c @@ -255,7 +255,7 @@ xfs_dir2_block_to_sf( xfs_dir2_sf_check(args); out: xfs_trans_log_inode(args->trans, dp, logflags); - kmem_free(block, mp->m_dirblksize); + kmem_free(block); return error; } @@ -512,7 +512,7 @@ xfs_dir2_sf_addname_hard( sfep = xfs_dir2_sf_nextentry(sfp, sfep); memcpy(sfep, oldsfep, old_isize - nbytes); } - kmem_free(buf, old_isize); + kmem_free(buf); dp->i_d.di_size = new_isize; xfs_dir2_sf_check(args); } @@ -1174,7 +1174,7 @@ xfs_dir2_sf_toino4( /* * Clean up the inode. */ - kmem_free(buf, oldsize); + kmem_free(buf); dp->i_d.di_size = newsize; xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_DDATA); } @@ -1251,7 +1251,7 @@ xfs_dir2_sf_toino8( /* * Clean up the inode. */ - kmem_free(buf, oldsize); + kmem_free(buf); dp->i_d.di_size = newsize; xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_DDATA); } diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c index 05e5365d3c3..7380a00644c 100644 --- a/fs/xfs/xfs_error.c +++ b/fs/xfs/xfs_error.c @@ -150,8 +150,7 @@ xfs_errortag_clearall(xfs_mount_t *mp, int loud) xfs_etest[i]); xfs_etest[i] = 0; xfs_etest_fsid[i] = 0LL; - kmem_free(xfs_etest_fsname[i], - strlen(xfs_etest_fsname[i]) + 1); + kmem_free(xfs_etest_fsname[i]); xfs_etest_fsname[i] = NULL; } } @@ -175,7 +174,7 @@ xfs_fs_vcmn_err(int level, xfs_mount_t *mp, char *fmt, va_list ap) newfmt = kmem_alloc(len, KM_SLEEP); sprintf(newfmt, "Filesystem \"%s\": %s", mp->m_fsname, fmt); icmn_err(level, newfmt, ap); - kmem_free(newfmt, len); + kmem_free(newfmt); } else { icmn_err(level, fmt, ap); } diff --git a/fs/xfs/xfs_extfree_item.c b/fs/xfs/xfs_extfree_item.c index 132bd07b9bb..8aa28f751b2 100644 --- a/fs/xfs/xfs_extfree_item.c +++ b/fs/xfs/xfs_extfree_item.c @@ -41,8 +41,7 @@ xfs_efi_item_free(xfs_efi_log_item_t *efip) int nexts = efip->efi_format.efi_nextents; if (nexts > XFS_EFI_MAX_FAST_EXTENTS) { - kmem_free(efip, sizeof(xfs_efi_log_item_t) + - (nexts - 1) * sizeof(xfs_extent_t)); + kmem_free(efip); } else { kmem_zone_free(xfs_efi_zone, efip); } @@ -374,8 +373,7 @@ xfs_efd_item_free(xfs_efd_log_item_t *efdp) int nexts = efdp->efd_format.efd_nextents; if (nexts > XFS_EFD_MAX_FAST_EXTENTS) { - kmem_free(efdp, sizeof(xfs_efd_log_item_t) + - (nexts - 1) * sizeof(xfs_extent_t)); + kmem_free(efdp); } else { kmem_zone_free(xfs_efd_zone, efdp); } diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index e569bf5d6cf..4b21490334b 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -2258,7 +2258,7 @@ xfs_ifree_cluster( xfs_trans_binval(tp, bp); } - kmem_free(ip_found, ninodes * sizeof(xfs_inode_t *)); + kmem_free(ip_found); xfs_put_perag(mp, pag); } @@ -2470,7 +2470,7 @@ xfs_iroot_realloc( (int)new_size); memcpy(np, op, new_max * (uint)sizeof(xfs_dfsbno_t)); } - kmem_free(ifp->if_broot, ifp->if_broot_bytes); + kmem_free(ifp->if_broot); ifp->if_broot = new_broot; ifp->if_broot_bytes = (int)new_size; ASSERT(ifp->if_broot_bytes <= @@ -2514,7 +2514,7 @@ xfs_idata_realloc( if (new_size == 0) { if (ifp->if_u1.if_data != ifp->if_u2.if_inline_data) { - kmem_free(ifp->if_u1.if_data, ifp->if_real_bytes); + kmem_free(ifp->if_u1.if_data); } ifp->if_u1.if_data = NULL; real_size = 0; @@ -2529,7 +2529,7 @@ xfs_idata_realloc( ASSERT(ifp->if_real_bytes != 0); memcpy(ifp->if_u2.if_inline_data, ifp->if_u1.if_data, new_size); - kmem_free(ifp->if_u1.if_data, ifp->if_real_bytes); + kmem_free(ifp->if_u1.if_data); ifp->if_u1.if_data = ifp->if_u2.if_inline_data; } real_size = 0; @@ -2636,7 +2636,7 @@ xfs_idestroy_fork( ifp = XFS_IFORK_PTR(ip, whichfork); if (ifp->if_broot != NULL) { - kmem_free(ifp->if_broot, ifp->if_broot_bytes); + kmem_free(ifp->if_broot); ifp->if_broot = NULL; } @@ -2650,7 +2650,7 @@ xfs_idestroy_fork( if ((ifp->if_u1.if_data != ifp->if_u2.if_inline_data) && (ifp->if_u1.if_data != NULL)) { ASSERT(ifp->if_real_bytes != 0); - kmem_free(ifp->if_u1.if_data, ifp->if_real_bytes); + kmem_free(ifp->if_u1.if_data); ifp->if_u1.if_data = NULL; ifp->if_real_bytes = 0; } @@ -3058,7 +3058,7 @@ xfs_iflush_cluster( out_free: read_unlock(&pag->pag_ici_lock); - kmem_free(ilist, ilist_size); + kmem_free(ilist); return 0; @@ -3102,7 +3102,7 @@ cluster_corrupt_out: * Unlocks the flush lock */ xfs_iflush_abort(iq); - kmem_free(ilist, ilist_size); + kmem_free(ilist); return XFS_ERROR(EFSCORRUPTED); } @@ -3836,7 +3836,7 @@ xfs_iext_add_indirect_multi( erp = xfs_iext_irec_new(ifp, erp_idx); } memmove(&erp->er_extbuf[i], nex2_ep, byte_diff); - kmem_free(nex2_ep, byte_diff); + kmem_free(nex2_ep); erp->er_extcount += nex2; xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, nex2); } @@ -4112,7 +4112,7 @@ xfs_iext_direct_to_inline( */ memcpy(ifp->if_u2.if_inline_ext, ifp->if_u1.if_extents, nextents * sizeof(xfs_bmbt_rec_t)); - kmem_free(ifp->if_u1.if_extents, ifp->if_real_bytes); + kmem_free(ifp->if_u1.if_extents); ifp->if_u1.if_extents = ifp->if_u2.if_inline_ext; ifp->if_real_bytes = 0; } @@ -4186,7 +4186,7 @@ xfs_iext_indirect_to_direct( ASSERT(ifp->if_real_bytes == XFS_IEXT_BUFSZ); ep = ifp->if_u1.if_ext_irec->er_extbuf; - kmem_free(ifp->if_u1.if_ext_irec, sizeof(xfs_ext_irec_t)); + kmem_free(ifp->if_u1.if_ext_irec); ifp->if_flags &= ~XFS_IFEXTIREC; ifp->if_u1.if_extents = ep; ifp->if_bytes = size; @@ -4212,7 +4212,7 @@ xfs_iext_destroy( } ifp->if_flags &= ~XFS_IFEXTIREC; } else if (ifp->if_real_bytes) { - kmem_free(ifp->if_u1.if_extents, ifp->if_real_bytes); + kmem_free(ifp->if_u1.if_extents); } else if (ifp->if_bytes) { memset(ifp->if_u2.if_inline_ext, 0, XFS_INLINE_EXTS * sizeof(xfs_bmbt_rec_t)); @@ -4483,7 +4483,7 @@ xfs_iext_irec_remove( if (erp->er_extbuf) { xfs_iext_irec_update_extoffs(ifp, erp_idx + 1, -erp->er_extcount); - kmem_free(erp->er_extbuf, XFS_IEXT_BUFSZ); + kmem_free(erp->er_extbuf); } /* Compact extent records */ erp = ifp->if_u1.if_ext_irec; @@ -4501,8 +4501,7 @@ xfs_iext_irec_remove( xfs_iext_realloc_indirect(ifp, nlists * sizeof(xfs_ext_irec_t)); } else { - kmem_free(ifp->if_u1.if_ext_irec, - sizeof(xfs_ext_irec_t)); + kmem_free(ifp->if_u1.if_ext_irec); } ifp->if_real_bytes = nlists * XFS_IEXT_BUFSZ; } @@ -4571,7 +4570,7 @@ xfs_iext_irec_compact_pages( * so er_extoffs don't get modified in * xfs_iext_irec_remove. */ - kmem_free(erp_next->er_extbuf, XFS_IEXT_BUFSZ); + kmem_free(erp_next->er_extbuf); erp_next->er_extbuf = NULL; xfs_iext_irec_remove(ifp, erp_idx + 1); nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; @@ -4614,8 +4613,7 @@ xfs_iext_irec_compact_full( * so er_extoffs don't get modified in * xfs_iext_irec_remove. */ - kmem_free(erp_next->er_extbuf, - erp_next->er_extcount * sizeof(xfs_bmbt_rec_t)); + kmem_free(erp_next->er_extbuf); erp_next->er_extbuf = NULL; xfs_iext_irec_remove(ifp, erp_idx + 1); erp = &ifp->if_u1.if_ext_irec[erp_idx]; diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c index 167b33f1577..0eee08a32c2 100644 --- a/fs/xfs/xfs_inode_item.c +++ b/fs/xfs/xfs_inode_item.c @@ -686,7 +686,7 @@ xfs_inode_item_unlock( ASSERT(ip->i_d.di_nextents > 0); ASSERT(iip->ili_format.ilf_fields & XFS_ILOG_DEXT); ASSERT(ip->i_df.if_bytes > 0); - kmem_free(iip->ili_extents_buf, ip->i_df.if_bytes); + kmem_free(iip->ili_extents_buf); iip->ili_extents_buf = NULL; } if (iip->ili_aextents_buf != NULL) { @@ -694,7 +694,7 @@ xfs_inode_item_unlock( ASSERT(ip->i_d.di_anextents > 0); ASSERT(iip->ili_format.ilf_fields & XFS_ILOG_AEXT); ASSERT(ip->i_afp->if_bytes > 0); - kmem_free(iip->ili_aextents_buf, ip->i_afp->if_bytes); + kmem_free(iip->ili_aextents_buf); iip->ili_aextents_buf = NULL; } @@ -957,8 +957,7 @@ xfs_inode_item_destroy( { #ifdef XFS_TRANS_DEBUG if (ip->i_itemp->ili_root_size != 0) { - kmem_free(ip->i_itemp->ili_orig_root, - ip->i_itemp->ili_root_size); + kmem_free(ip->i_itemp->ili_orig_root); } #endif kmem_zone_free(xfs_ili_zone, ip->i_itemp); diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c index 419de15aeb4..9a3ef9dcaeb 100644 --- a/fs/xfs/xfs_itable.c +++ b/fs/xfs/xfs_itable.c @@ -257,7 +257,7 @@ xfs_bulkstat_one( *ubused = error; out_free: - kmem_free(buf, sizeof(*buf)); + kmem_free(buf); return error; } @@ -708,7 +708,7 @@ xfs_bulkstat( /* * Done, we're either out of filesystem or space to put the data. */ - kmem_free(irbuf, irbsize); + kmem_free(irbuf); *ubcountp = ubelem; /* * Found some inodes, return them now and return the error next time. @@ -914,7 +914,7 @@ xfs_inumbers( } *lastino = XFS_AGINO_TO_INO(mp, agno, agino); } - kmem_free(buffer, bcount * sizeof(*buffer)); + kmem_free(buffer); if (cur) xfs_btree_del_cursor(cur, (error ? XFS_BTREE_ERROR : XFS_BTREE_NOERROR)); diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index ad3d26ddfe3..16a01abe249 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -1570,7 +1570,7 @@ xlog_dealloc_log(xlog_t *log) } #endif next_iclog = iclog->ic_next; - kmem_free(iclog, sizeof(xlog_in_core_t)); + kmem_free(iclog); iclog = next_iclog; } freesema(&log->l_flushsema); @@ -1587,7 +1587,7 @@ xlog_dealloc_log(xlog_t *log) } #endif log->l_mp->m_log = NULL; - kmem_free(log, sizeof(xlog_t)); + kmem_free(log); } /* xlog_dealloc_log */ /* diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index e65ab4af095..9eb722ec744 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1715,8 +1715,7 @@ xlog_check_buffer_cancelled( } else { prevp->bc_next = bcp->bc_next; } - kmem_free(bcp, - sizeof(xfs_buf_cancel_t)); + kmem_free(bcp); } } return 1; @@ -2519,7 +2518,7 @@ write_inode_buffer: error: if (need_free) - kmem_free(in_f, sizeof(*in_f)); + kmem_free(in_f); return XFS_ERROR(error); } @@ -2830,16 +2829,14 @@ xlog_recover_free_trans( item = item->ri_next; /* Free the regions in the item. */ for (i = 0; i < free_item->ri_cnt; i++) { - kmem_free(free_item->ri_buf[i].i_addr, - free_item->ri_buf[i].i_len); + kmem_free(free_item->ri_buf[i].i_addr); } /* Free the item itself */ - kmem_free(free_item->ri_buf, - (free_item->ri_total * sizeof(xfs_log_iovec_t))); - kmem_free(free_item, sizeof(xlog_recover_item_t)); + kmem_free(free_item->ri_buf); + kmem_free(free_item); } while (first_item != item); /* Free the transaction recover structure */ - kmem_free(trans, sizeof(xlog_recover_t)); + kmem_free(trans); } STATIC int @@ -3786,8 +3783,7 @@ xlog_do_log_recovery( error = xlog_do_recovery_pass(log, head_blk, tail_blk, XLOG_RECOVER_PASS1); if (error != 0) { - kmem_free(log->l_buf_cancel_table, - XLOG_BC_TABLE_SIZE * sizeof(xfs_buf_cancel_t*)); + kmem_free(log->l_buf_cancel_table); log->l_buf_cancel_table = NULL; return error; } @@ -3806,8 +3802,7 @@ xlog_do_log_recovery( } #endif /* DEBUG */ - kmem_free(log->l_buf_cancel_table, - XLOG_BC_TABLE_SIZE * sizeof(xfs_buf_cancel_t*)); + kmem_free(log->l_buf_cancel_table); log->l_buf_cancel_table = NULL; return error; diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 361c7a755a0..c63f410ccfa 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -161,11 +161,8 @@ xfs_mount_free( for (agno = 0; agno < mp->m_maxagi; agno++) if (mp->m_perag[agno].pagb_list) - kmem_free(mp->m_perag[agno].pagb_list, - sizeof(xfs_perag_busy_t) * - XFS_PAGB_NUM_SLOTS); - kmem_free(mp->m_perag, - sizeof(xfs_perag_t) * mp->m_sb.sb_agcount); + kmem_free(mp->m_perag[agno].pagb_list); + kmem_free(mp->m_perag); } spinlock_destroy(&mp->m_ail_lock); @@ -176,11 +173,11 @@ xfs_mount_free( XFS_QM_DONE(mp); if (mp->m_fsname != NULL) - kmem_free(mp->m_fsname, mp->m_fsname_len); + kmem_free(mp->m_fsname); if (mp->m_rtname != NULL) - kmem_free(mp->m_rtname, strlen(mp->m_rtname) + 1); + kmem_free(mp->m_rtname); if (mp->m_logname != NULL) - kmem_free(mp->m_logname, strlen(mp->m_logname) + 1); + kmem_free(mp->m_logname); xfs_icsb_destroy_counters(mp); } @@ -1265,9 +1262,8 @@ xfs_mountfs( error2: for (agno = 0; agno < sbp->sb_agcount; agno++) if (mp->m_perag[agno].pagb_list) - kmem_free(mp->m_perag[agno].pagb_list, - sizeof(xfs_perag_busy_t) * XFS_PAGB_NUM_SLOTS); - kmem_free(mp->m_perag, sbp->sb_agcount * sizeof(xfs_perag_t)); + kmem_free(mp->m_perag[agno].pagb_list); + kmem_free(mp->m_perag); mp->m_perag = NULL; /* FALLTHROUGH */ error1: diff --git a/fs/xfs/xfs_mru_cache.c b/fs/xfs/xfs_mru_cache.c index a0b2c0a2589..26d14a1e0e1 100644 --- a/fs/xfs/xfs_mru_cache.c +++ b/fs/xfs/xfs_mru_cache.c @@ -382,9 +382,9 @@ xfs_mru_cache_create( exit: if (err && mru && mru->lists) - kmem_free(mru->lists, mru->grp_count * sizeof(*mru->lists)); + kmem_free(mru->lists); if (err && mru) - kmem_free(mru, sizeof(*mru)); + kmem_free(mru); return err; } @@ -424,8 +424,8 @@ xfs_mru_cache_destroy( xfs_mru_cache_flush(mru); - kmem_free(mru->lists, mru->grp_count * sizeof(*mru->lists)); - kmem_free(mru, sizeof(*mru)); + kmem_free(mru->lists); + kmem_free(mru); } /* diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c index a0dc6e5bc5b..bf87a591350 100644 --- a/fs/xfs/xfs_rtalloc.c +++ b/fs/xfs/xfs_rtalloc.c @@ -2062,7 +2062,7 @@ xfs_growfs_rt( /* * Free the fake mp structure. */ - kmem_free(nmp, sizeof(*nmp)); + kmem_free(nmp); return error; } diff --git a/fs/xfs/xfs_trans.c b/fs/xfs/xfs_trans.c index 140386434aa..e4ebddd3c50 100644 --- a/fs/xfs/xfs_trans.c +++ b/fs/xfs/xfs_trans.c @@ -889,7 +889,7 @@ shut_us_down: tp->t_commit_lsn = commit_lsn; if (nvec > XFS_TRANS_LOGVEC_COUNT) { - kmem_free(log_vector, nvec * sizeof(xfs_log_iovec_t)); + kmem_free(log_vector); } /* @@ -1265,7 +1265,7 @@ xfs_trans_committed( ASSERT(!XFS_LIC_ARE_ALL_FREE(licp)); xfs_trans_chunk_committed(licp, tp->t_lsn, abortflag); next_licp = licp->lic_next; - kmem_free(licp, sizeof(xfs_log_item_chunk_t)); + kmem_free(licp); licp = next_licp; } diff --git a/fs/xfs/xfs_trans_inode.c b/fs/xfs/xfs_trans_inode.c index 4c70bf5e998..2a1c0f071f9 100644 --- a/fs/xfs/xfs_trans_inode.c +++ b/fs/xfs/xfs_trans_inode.c @@ -291,7 +291,7 @@ xfs_trans_inode_broot_debug( iip = ip->i_itemp; if (iip->ili_root_size != 0) { ASSERT(iip->ili_orig_root != NULL); - kmem_free(iip->ili_orig_root, iip->ili_root_size); + kmem_free(iip->ili_orig_root); iip->ili_root_size = 0; iip->ili_orig_root = NULL; } diff --git a/fs/xfs/xfs_trans_item.c b/fs/xfs/xfs_trans_item.c index 66a09f0d894..db5c8359552 100644 --- a/fs/xfs/xfs_trans_item.c +++ b/fs/xfs/xfs_trans_item.c @@ -161,7 +161,7 @@ xfs_trans_free_item(xfs_trans_t *tp, xfs_log_item_desc_t *lidp) licpp = &((*licpp)->lic_next); } *licpp = licp->lic_next; - kmem_free(licp, sizeof(xfs_log_item_chunk_t)); + kmem_free(licp); tp->t_items_free -= XFS_LIC_NUM_SLOTS; } } @@ -314,7 +314,7 @@ xfs_trans_free_items( ASSERT(!XFS_LIC_ARE_ALL_FREE(licp)); (void) xfs_trans_unlock_chunk(licp, 1, abort, NULLCOMMITLSN); next_licp = licp->lic_next; - kmem_free(licp, sizeof(xfs_log_item_chunk_t)); + kmem_free(licp); licp = next_licp; } @@ -363,7 +363,7 @@ xfs_trans_unlock_items(xfs_trans_t *tp, xfs_lsn_t commit_lsn) next_licp = licp->lic_next; if (XFS_LIC_ARE_ALL_FREE(licp)) { *licpp = next_licp; - kmem_free(licp, sizeof(xfs_log_item_chunk_t)); + kmem_free(licp); freed -= XFS_LIC_NUM_SLOTS; } else { licpp = &(licp->lic_next); @@ -530,7 +530,7 @@ xfs_trans_free_busy(xfs_trans_t *tp) lbcp = tp->t_busy.lbc_next; while (lbcp != NULL) { lbcq = lbcp->lbc_next; - kmem_free(lbcp, sizeof(xfs_log_busy_chunk_t)); + kmem_free(lbcp); lbcp = lbcq; } diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c index bbc911720d8..a005cebf504 100644 --- a/fs/xfs/xfs_vfsops.c +++ b/fs/xfs/xfs_vfsops.c @@ -639,7 +639,7 @@ out: xfs_unmountfs(mp, credp); xfs_qmops_put(mp); xfs_dmops_put(mp); - kmem_free(mp, sizeof(xfs_mount_t)); + kmem_free(mp); } return XFS_ERROR(error); @@ -1055,7 +1055,7 @@ xfs_sync_inodes( if (XFS_FORCED_SHUTDOWN(mp) && !(flags & SYNC_CLOSE)) { XFS_MOUNT_IUNLOCK(mp); - kmem_free(ipointer, sizeof(xfs_iptr_t)); + kmem_free(ipointer); return 0; } @@ -1201,7 +1201,7 @@ xfs_sync_inodes( } XFS_MOUNT_IUNLOCK(mp); ASSERT(ipointer_in == B_FALSE); - kmem_free(ipointer, sizeof(xfs_iptr_t)); + kmem_free(ipointer); return XFS_ERROR(error); } @@ -1231,7 +1231,7 @@ xfs_sync_inodes( ASSERT(ipointer_in == B_FALSE); - kmem_free(ipointer, sizeof(xfs_iptr_t)); + kmem_free(ipointer); return XFS_ERROR(last_error); } -- GitLab From 4f0e8a9816e78306bb821018613dbd2513184d8a Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Mon, 19 May 2008 16:34:04 +1000 Subject: [PATCH 0118/1024] [XFS] Remove unused Falgs parameter from xfs_qm_dqpurge() SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31056a Signed-off-by: Denys Vlasenko Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/quota/xfs_dquot.c | 3 +-- fs/xfs/quota/xfs_dquot.h | 2 +- fs/xfs/quota/xfs_qm.c | 2 +- 3 files changed, 3 insertions(+), 4 deletions(-) diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c index 85df3288efd..fc9f3fb39b7 100644 --- a/fs/xfs/quota/xfs_dquot.c +++ b/fs/xfs/quota/xfs_dquot.c @@ -1435,8 +1435,7 @@ xfs_dqlock2( /* ARGSUSED */ int xfs_qm_dqpurge( - xfs_dquot_t *dqp, - uint flags) + xfs_dquot_t *dqp) { xfs_dqhash_t *thishash; xfs_mount_t *mp = dqp->q_mount; diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h index 5c371a92e3e..f7393bba4e9 100644 --- a/fs/xfs/quota/xfs_dquot.h +++ b/fs/xfs/quota/xfs_dquot.h @@ -164,7 +164,7 @@ extern void xfs_qm_dqprint(xfs_dquot_t *); extern void xfs_qm_dqdestroy(xfs_dquot_t *); extern int xfs_qm_dqflush(xfs_dquot_t *, uint); -extern int xfs_qm_dqpurge(xfs_dquot_t *, uint); +extern int xfs_qm_dqpurge(xfs_dquot_t *); extern void xfs_qm_dqunpin_wait(xfs_dquot_t *); extern int xfs_qm_dqlock_nowait(xfs_dquot_t *); extern int xfs_qm_dqflock_nowait(xfs_dquot_t *); diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c index cde5c508f0e..26370a3128f 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/quota/xfs_qm.c @@ -631,7 +631,7 @@ xfs_qm_dqpurge_int( * freelist in INACTIVE state. */ nextdqp = dqp->MPL_NEXT; - nmisses += xfs_qm_dqpurge(dqp, flags); + nmisses += xfs_qm_dqpurge(dqp); dqp = nextdqp; } xfs_qm_mplist_unlock(mp); -- GitLab From b41759cf11c84ad0d569c0ef200c449ad2cc24e3 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Mon, 19 May 2008 16:34:11 +1000 Subject: [PATCH 0119/1024] [XFS] Remove unused wbc parameter from xfs_start_page_writeback() SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31057a Signed-off-by: Denys Vlasenko Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_aops.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c index a55c3b26d84..0b211cba190 100644 --- a/fs/xfs/linux-2.6/xfs_aops.c +++ b/fs/xfs/linux-2.6/xfs_aops.c @@ -409,7 +409,6 @@ xfs_start_buffer_writeback( STATIC void xfs_start_page_writeback( struct page *page, - struct writeback_control *wbc, int clear_dirty, int buffers) { @@ -858,7 +857,7 @@ xfs_convert_page( done = 1; } } - xfs_start_page_writeback(page, wbc, !page_dirty, count); + xfs_start_page_writeback(page, !page_dirty, count); } return done; @@ -1130,7 +1129,7 @@ xfs_page_state_convert( SetPageUptodate(page); if (startio) - xfs_start_page_writeback(page, wbc, 1, count); + xfs_start_page_writeback(page, 1, count); if (ioend && iomap_valid) { offset = (iomap.iomap_offset + iomap.iomap_bsize - 1) >> -- GitLab From d729eae8933cb3eb8edf1446532c178b66b293a9 Mon Sep 17 00:00:00 2001 From: Michael Nishimoto Date: Mon, 19 May 2008 16:34:20 +1000 Subject: [PATCH 0120/1024] [XFS] Ensure that 2 GiB xfs logs work properly. We found this while experimenting with 2GiB xfs logs. The previous code never assumed that xfs logs would ever get so large. SGI-PV: 981502 SGI-Modid: xfs-linux-melb:xfs-kern:31058a Signed-off-by: Michael Nishimoto Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_log.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 16a01abe249..6195cc88010 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -226,20 +226,24 @@ xlog_grant_sub_space(struct log *log, int bytes) static void xlog_grant_add_space_write(struct log *log, int bytes) { - log->l_grant_write_bytes += bytes; - if (log->l_grant_write_bytes > log->l_logsize) { - log->l_grant_write_bytes -= log->l_logsize; + int tmp = log->l_logsize - log->l_grant_write_bytes; + if (tmp > bytes) + log->l_grant_write_bytes += bytes; + else { log->l_grant_write_cycle++; + log->l_grant_write_bytes = bytes - tmp; } } static void xlog_grant_add_space_reserve(struct log *log, int bytes) { - log->l_grant_reserve_bytes += bytes; - if (log->l_grant_reserve_bytes > log->l_logsize) { - log->l_grant_reserve_bytes -= log->l_logsize; + int tmp = log->l_logsize - log->l_grant_reserve_bytes; + if (tmp > bytes) + log->l_grant_reserve_bytes += bytes; + else { log->l_grant_reserve_cycle++; + log->l_grant_reserve_bytes = bytes - tmp; } } -- GitLab From d748c62367eb630cc30b91d561a5362f597a0892 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 19 May 2008 16:34:27 +1000 Subject: [PATCH 0121/1024] [XFS] Convert l_flushsema to a sv_t The l_flushsema doesn't exactly have completion semantics, nor mutex semantics. It's used as a list of tasks which are waiting to be notified that a flush has completed. It was also being used in a way that was potentially racy, depending on the semaphore implementation. By using a sv_t instead of a semaphore we avoid the need for a separate counter, since we know we just need to wake everything on the queue. Original waitqueue implementation from Matthew Wilcox. Cleanup and conversion to sv_t by Christoph Hellwig. SGI-PV: 981507 SGI-Modid: xfs-linux-melb:xfs-kern:31059a Signed-off-by: Matthew Wilcox Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_log.c | 29 +++++++++++++---------------- fs/xfs/xfs_log_priv.h | 6 ++---- 2 files changed, 15 insertions(+), 20 deletions(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 6195cc88010..91b00a5686c 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -1232,7 +1232,7 @@ xlog_alloc_log(xfs_mount_t *mp, spin_lock_init(&log->l_icloglock); spin_lock_init(&log->l_grant_lock); - initnsema(&log->l_flushsema, 0, "ic-flush"); + sv_init(&log->l_flush_wait, 0, "flush_wait"); /* log record size must be multiple of BBSIZE; see xlog_rec_header_t */ ASSERT((XFS_BUF_SIZE(bp) & BBMASK) == 0); @@ -1577,7 +1577,6 @@ xlog_dealloc_log(xlog_t *log) kmem_free(iclog); iclog = next_iclog; } - freesema(&log->l_flushsema); spinlock_destroy(&log->l_icloglock); spinlock_destroy(&log->l_grant_lock); @@ -2101,6 +2100,7 @@ xlog_state_do_callback( int funcdidcallbacks; /* flag: function did callbacks */ int repeats; /* for issuing console warnings if * looping too many times */ + int wake = 0; spin_lock(&log->l_icloglock); first_iclog = iclog = log->l_iclog; @@ -2282,15 +2282,13 @@ xlog_state_do_callback( } #endif - flushcnt = 0; - if (log->l_iclog->ic_state & (XLOG_STATE_ACTIVE|XLOG_STATE_IOERROR)) { - flushcnt = log->l_flushcnt; - log->l_flushcnt = 0; - } + if (log->l_iclog->ic_state & (XLOG_STATE_ACTIVE|XLOG_STATE_IOERROR)) + wake = 1; spin_unlock(&log->l_icloglock); - while (flushcnt--) - vsema(&log->l_flushsema); -} /* xlog_state_do_callback */ + + if (wake) + sv_broadcast(&log->l_flush_wait); +} /* @@ -2388,16 +2386,15 @@ restart: } iclog = log->l_iclog; - if (! (iclog->ic_state == XLOG_STATE_ACTIVE)) { - log->l_flushcnt++; - spin_unlock(&log->l_icloglock); + if (iclog->ic_state != XLOG_STATE_ACTIVE) { xlog_trace_iclog(iclog, XLOG_TRACE_SLEEP_FLUSH); XFS_STATS_INC(xs_log_noiclogs); - /* Ensure that log writes happen */ - psema(&log->l_flushsema, PINOD); + + /* Wait for log writes to have flushed */ + sv_wait(&log->l_flush_wait, 0, &log->l_icloglock, 0); goto restart; } - ASSERT(iclog->ic_state == XLOG_STATE_ACTIVE); + head = &iclog->ic_header; atomic_inc(&iclog->ic_refcnt); /* prevents sync */ diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h index 8952a392b5f..6245913196b 100644 --- a/fs/xfs/xfs_log_priv.h +++ b/fs/xfs/xfs_log_priv.h @@ -423,10 +423,8 @@ typedef struct log { int l_logBBsize; /* size of log in BB chunks */ /* The following block of fields are changed while holding icloglock */ - sema_t l_flushsema ____cacheline_aligned_in_smp; - /* iclog flushing semaphore */ - int l_flushcnt; /* # of procs waiting on this - * sema */ + sv_t l_flush_wait ____cacheline_aligned_in_smp; + /* waiting for iclog flush */ int l_covered_state;/* state of "covering disk * log entries" */ xlog_in_core_t *l_iclog; /* head log queue */ -- GitLab From 911ee3de3d1cb6620e2ac4e0678ff434867e2644 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 May 2008 16:34:34 +1000 Subject: [PATCH 0122/1024] [XFS] Kill attr_capable checks as already done in xattr_permission. No need for addition permission checks in the xattr handler, fs/xattr.c:xattr_permission() already does them, and in fact slightly more strict then what was in the attr_capable handlers. SGI-PV: 981809 SGI-Modid: xfs-linux-melb:xfs-kern:31164a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_iops.c | 13 +----------- fs/xfs/xfs_attr.c | 41 ------------------------------------- fs/xfs/xfs_attr.h | 2 -- 3 files changed, 1 insertion(+), 55 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 5fc61c824bb..13b6cfd366c 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -739,15 +739,11 @@ xfs_vn_setxattr( char *attr = (char *)name; attrnames_t *namesp; int xflags = 0; - int error; namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT); if (!namesp) return -EOPNOTSUPP; attr += namesp->attr_namelen; - error = namesp->attr_capable(vp, NULL); - if (error) - return error; /* Convert Linux syscall to XFS internal ATTR flags */ if (flags & XATTR_CREATE) @@ -769,15 +765,11 @@ xfs_vn_getxattr( char *attr = (char *)name; attrnames_t *namesp; int xflags = 0; - ssize_t error; namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT); if (!namesp) return -EOPNOTSUPP; attr += namesp->attr_namelen; - error = namesp->attr_capable(vp, NULL); - if (error) - return error; /* Convert Linux syscall to XFS internal ATTR flags */ if (!size) { @@ -817,15 +809,12 @@ xfs_vn_removexattr( char *attr = (char *)name; attrnames_t *namesp; int xflags = 0; - int error; namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT); if (!namesp) return -EOPNOTSUPP; attr += namesp->attr_namelen; - error = namesp->attr_capable(vp, NULL); - if (error) - return error; + xflags |= namesp->attr_flag; return namesp->attr_remove(vp, attr, xflags); } diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index df151a85918..86d8619f279 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -2622,43 +2622,6 @@ attr_lookup_namespace( return NULL; } -/* - * Some checks to prevent people abusing EAs to get over quota: - * - Don't allow modifying user EAs on devices/symlinks; - * - Don't allow modifying user EAs if sticky bit set; - */ -STATIC int -attr_user_capable( - bhv_vnode_t *vp, - cred_t *cred) -{ - struct inode *inode = vn_to_inode(vp); - - if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) - return -EPERM; - if (!S_ISREG(inode->i_mode) && !S_ISDIR(inode->i_mode) && - !capable(CAP_SYS_ADMIN)) - return -EPERM; - if (S_ISDIR(inode->i_mode) && (inode->i_mode & S_ISVTX) && - (current_fsuid(cred) != inode->i_uid) && !capable(CAP_FOWNER)) - return -EPERM; - return 0; -} - -STATIC int -attr_trusted_capable( - bhv_vnode_t *vp, - cred_t *cred) -{ - struct inode *inode = vn_to_inode(vp); - - if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) - return -EPERM; - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - return 0; -} - STATIC int attr_system_set( bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) @@ -2709,7 +2672,6 @@ struct attrnames attr_system = { .attr_get = attr_system_get, .attr_set = attr_system_set, .attr_remove = attr_system_remove, - .attr_capable = (attrcapable_t)fs_noerr, }; struct attrnames attr_trusted = { @@ -2719,7 +2681,6 @@ struct attrnames attr_trusted = { .attr_get = attr_generic_get, .attr_set = attr_generic_set, .attr_remove = attr_generic_remove, - .attr_capable = attr_trusted_capable, }; struct attrnames attr_secure = { @@ -2729,7 +2690,6 @@ struct attrnames attr_secure = { .attr_get = attr_generic_get, .attr_set = attr_generic_set, .attr_remove = attr_generic_remove, - .attr_capable = (attrcapable_t)fs_noerr, }; struct attrnames attr_user = { @@ -2738,7 +2698,6 @@ struct attrnames attr_user = { .attr_get = attr_generic_get, .attr_set = attr_generic_set, .attr_remove = attr_generic_remove, - .attr_capable = attr_user_capable, }; struct attrnames *attr_namespaces[] = diff --git a/fs/xfs/xfs_attr.h b/fs/xfs/xfs_attr.h index 6cfc9384fe3..9b96d171b75 100644 --- a/fs/xfs/xfs_attr.h +++ b/fs/xfs/xfs_attr.h @@ -42,7 +42,6 @@ typedef int (*attrset_t)(bhv_vnode_t *, char *, void *, size_t, int); typedef int (*attrget_t)(bhv_vnode_t *, char *, void *, size_t, int); typedef int (*attrremove_t)(bhv_vnode_t *, char *, int); typedef int (*attrexists_t)(bhv_vnode_t *); -typedef int (*attrcapable_t)(bhv_vnode_t *, struct cred *); typedef struct attrnames { char * attr_name; @@ -52,7 +51,6 @@ typedef struct attrnames { attrset_t attr_set; attrremove_t attr_remove; attrexists_t attr_exists; - attrcapable_t attr_capable; } attrnames_t; #define ATTR_NAMECOUNT 4 -- GitLab From 4b166de0a061e4e89d0741a5d080b141f11e2c9b Mon Sep 17 00:00:00 2001 From: David Chinner Date: Tue, 20 May 2008 11:30:27 +1000 Subject: [PATCH 0123/1024] [XFS] Update valid fields in xfs_mount_log_sb() Recent changes to update the version number during mount (attr2 stuff) failed to change the assert that checked for calid flags being changed on mount. Clearly this path hasn't been exercised by the test code.... SGI-PV: 981950 SGI-Modid: xfs-linux-melb:xfs-kern:31183a Signed-off-by: David Chinner Signed-off-by: Eric Sandeen Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_mount.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index c63f410ccfa..b484ca32641 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -1934,7 +1934,8 @@ xfs_mount_log_sb( int error; ASSERT(fields & (XFS_SB_UNIT | XFS_SB_WIDTH | XFS_SB_UUID | - XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2)); + XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2 | + XFS_SB_VERSIONNUM)); tp = xfs_trans_alloc(mp, XFS_TRANS_SB_UNIT); error = xfs_trans_reserve(tp, 0, mp->m_sb.sb_sectsize + 128, 0, 0, -- GitLab From fa6adbe08825274a3803abb9aef365f939be7da5 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 11:30:33 +1000 Subject: [PATCH 0124/1024] [XFS] kill xfs_uuid_unmount Quite useless wrapper that doesn't help making the code more readable. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31184a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_mount.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index b484ca32641..fca3f8af674 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -47,7 +47,6 @@ STATIC int xfs_mount_log_sb(xfs_mount_t *, __int64_t); STATIC int xfs_uuid_mount(xfs_mount_t *); -STATIC void xfs_uuid_unmount(xfs_mount_t *mp); STATIC void xfs_unmountfs_wait(xfs_mount_t *); @@ -1268,7 +1267,7 @@ xfs_mountfs( /* FALLTHROUGH */ error1: if (uuid_mounted) - xfs_uuid_unmount(mp); + uuid_table_remove(&mp->m_sb.sb_uuid); xfs_freesb(mp); return error; } @@ -1349,7 +1348,7 @@ xfs_unmountfs(xfs_mount_t *mp, struct cred *cr) xfs_unmountfs_close(mp, cr); if ((mp->m_flags & XFS_MOUNT_NOUUID) == 0) - xfs_uuid_unmount(mp); + uuid_table_remove(&mp->m_sb.sb_uuid); #if defined(DEBUG) || defined(INDUCE_IO_ERROR) xfs_errortag_clearall(mp, 0); @@ -1910,16 +1909,6 @@ xfs_uuid_mount( return 0; } -/* - * Remove filesystem from the UUID table. - */ -STATIC void -xfs_uuid_unmount( - xfs_mount_t *mp) -{ - uuid_table_remove(&mp->m_sb.sb_uuid); -} - /* * Used to log changes to the superblock unit and width fields which could * be altered by the mount options, as well as any potential sb_features2 -- GitLab From 48b62a1a97f118a5a71ae9222bc6d3481d6b757b Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 11:30:39 +1000 Subject: [PATCH 0125/1024] [XFS] merge xfs_mntupdate into xfs_fs_remount xfs_mntupdate already is completely Linux specific due to the VFS flags passed in, so it might aswell be merged into xfs_fs_remount. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31185a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 23 +++++++++++++++++++++-- fs/xfs/xfs_vfsops.c | 24 ------------------------ fs/xfs/xfs_vfsops.h | 2 -- 3 files changed, 21 insertions(+), 28 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 5c7144bc310..a3ecdf44246 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -52,6 +52,7 @@ #include "xfs_version.h" #include "xfs_log_priv.h" #include "xfs_trans_priv.h" +#include "xfs_filestream.h" #include #include @@ -1220,8 +1221,26 @@ xfs_fs_remount( int error; error = xfs_parseargs(mp, options, args, 1); - if (!error) - error = xfs_mntupdate(mp, flags, args); + if (error) + goto out_free_args; + + if (!(*flags & MS_RDONLY)) { /* rw/ro -> rw */ + if (mp->m_flags & XFS_MOUNT_RDONLY) + mp->m_flags &= ~XFS_MOUNT_RDONLY; + if (args->flags & XFSMNT_BARRIER) { + mp->m_flags |= XFS_MOUNT_BARRIER; + xfs_mountfs_check_barriers(mp); + } else { + mp->m_flags &= ~XFS_MOUNT_BARRIER; + } + } else if (!(mp->m_flags & XFS_MOUNT_RDONLY)) { /* rw -> ro */ + xfs_filestream_flush(mp); + xfs_sync(mp, SYNC_DATA_QUIESCE); + xfs_attr_quiesce(mp); + mp->m_flags |= XFS_MOUNT_RDONLY; + } + + out_free_args: kmem_free(args); return -error; } diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c index a005cebf504..e223aeab68b 100644 --- a/fs/xfs/xfs_vfsops.c +++ b/fs/xfs/xfs_vfsops.c @@ -701,30 +701,6 @@ xfs_attr_quiesce( xfs_unmountfs_writesb(mp); } -int -xfs_mntupdate( - struct xfs_mount *mp, - int *flags, - struct xfs_mount_args *args) -{ - if (!(*flags & MS_RDONLY)) { /* rw/ro -> rw */ - if (mp->m_flags & XFS_MOUNT_RDONLY) - mp->m_flags &= ~XFS_MOUNT_RDONLY; - if (args->flags & XFSMNT_BARRIER) { - mp->m_flags |= XFS_MOUNT_BARRIER; - xfs_mountfs_check_barriers(mp); - } else { - mp->m_flags &= ~XFS_MOUNT_BARRIER; - } - } else if (!(mp->m_flags & XFS_MOUNT_RDONLY)) { /* rw -> ro */ - xfs_filestream_flush(mp); - xfs_sync(mp, SYNC_DATA_QUIESCE); - xfs_attr_quiesce(mp); - mp->m_flags |= XFS_MOUNT_RDONLY; - } - return 0; -} - /* * xfs_unmount_flush implements a set of flush operation on special * inodes, which are needed as a separate set of operations so that diff --git a/fs/xfs/xfs_vfsops.h b/fs/xfs/xfs_vfsops.h index 1688817c55e..995091f1949 100644 --- a/fs/xfs/xfs_vfsops.h +++ b/fs/xfs/xfs_vfsops.h @@ -11,8 +11,6 @@ struct xfs_mount_args; int xfs_mount(struct xfs_mount *mp, struct xfs_mount_args *args, struct cred *credp); int xfs_unmount(struct xfs_mount *mp, int flags, struct cred *credp); -int xfs_mntupdate(struct xfs_mount *mp, int *flags, - struct xfs_mount_args *args); int xfs_sync(struct xfs_mount *mp, int flags); void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname, int lnnum); -- GitLab From 61436febae29085bffc7c291db03cbd709dc68a3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 11:30:46 +1000 Subject: [PATCH 0126/1024] [XFS] kill xfs_igrow_start and xfs_igrow_finish xfs_igrow_start just expands to xfs_zero_eof with two asserts that are useless in the context of the only caller and some rather confusing comments. xfs_igrow_finish is just a few lines of code decorated again with useless asserts and confusing comments. Just kill those two and merge them into xfs_setattr. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31186a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_inode.c | 61 ------------------------------------------- fs/xfs/xfs_inode.h | 3 --- fs/xfs/xfs_vnodeops.c | 15 ++++++++--- 3 files changed, 12 insertions(+), 67 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 4b21490334b..199a36ac8e2 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1763,67 +1763,6 @@ xfs_itruncate_finish( return 0; } - -/* - * xfs_igrow_start - * - * Do the first part of growing a file: zero any data in the last - * block that is beyond the old EOF. We need to do this before - * the inode is joined to the transaction to modify the i_size. - * That way we can drop the inode lock and call into the buffer - * cache to get the buffer mapping the EOF. - */ -int -xfs_igrow_start( - xfs_inode_t *ip, - xfs_fsize_t new_size, - cred_t *credp) -{ - ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL)); - ASSERT(new_size > ip->i_size); - - /* - * Zero any pages that may have been created by - * xfs_write_file() beyond the end of the file - * and any blocks between the old and new file sizes. - */ - return xfs_zero_eof(ip, new_size, ip->i_size); -} - -/* - * xfs_igrow_finish - * - * This routine is called to extend the size of a file. - * The inode must have both the iolock and the ilock locked - * for update and it must be a part of the current transaction. - * The xfs_igrow_start() function must have been called previously. - * If the change_flag is not zero, the inode change timestamp will - * be updated. - */ -void -xfs_igrow_finish( - xfs_trans_t *tp, - xfs_inode_t *ip, - xfs_fsize_t new_size, - int change_flag) -{ - ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL)); - ASSERT(ip->i_transp == tp); - ASSERT(new_size > ip->i_size); - - /* - * Update the file size. Update the inode change timestamp - * if change_flag set. - */ - ip->i_d.di_size = new_size; - ip->i_size = new_size; - if (change_flag) - xfs_ichgtime(ip, XFS_ICHGTIME_CHG); - xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); - -} - - /* * This is called when the inode's link count goes to 0. * We place the on-disk inode on a list in the AGI. It diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h index 0a999fee4f0..17a04b6321e 100644 --- a/fs/xfs/xfs_inode.h +++ b/fs/xfs/xfs_inode.h @@ -507,9 +507,6 @@ int xfs_itruncate_start(xfs_inode_t *, uint, xfs_fsize_t); int xfs_itruncate_finish(struct xfs_trans **, xfs_inode_t *, xfs_fsize_t, int, int); int xfs_iunlink(struct xfs_trans *, xfs_inode_t *); -int xfs_igrow_start(xfs_inode_t *, xfs_fsize_t, struct cred *); -void xfs_igrow_finish(struct xfs_trans *, xfs_inode_t *, - xfs_fsize_t, int); void xfs_idestroy_fork(xfs_inode_t *, int); void xfs_idestroy(xfs_inode_t *); diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index e475e3717eb..9b8b87fcd4e 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -444,7 +444,13 @@ xfs_setattr( code = 0; if ((vap->va_size > ip->i_size) && (flags & ATTR_NOSIZETOK) == 0) { - code = xfs_igrow_start(ip, vap->va_size, credp); + /* + * Do the first part of growing a file: zero any data + * in the last block that is beyond the old EOF. We + * need to do this before the inode is joined to the + * transaction to modify the i_size. + */ + code = xfs_zero_eof(ip, vap->va_size, ip->i_size); } xfs_iunlock(ip, XFS_ILOCK_EXCL); @@ -512,8 +518,11 @@ xfs_setattr( timeflags |= XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG; if (vap->va_size > ip->i_size) { - xfs_igrow_finish(tp, ip, vap->va_size, - !(flags & ATTR_DMI)); + ip->i_d.di_size = vap->va_size; + ip->i_size = vap->va_size; + if (!(flags & ATTR_DMI)) + xfs_ichgtime(ip, XFS_ICHGTIME_CHG); + xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); } else if ((vap->va_size <= ip->i_size) || ((vap->va_size == 0) && ip->i_d.di_nextents)) { /* -- GitLab From e48ad3160e5c5f5b952c7a7ed814f6f289a60100 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 11:30:52 +1000 Subject: [PATCH 0127/1024] [XFS] merge xfs_unmount into xfs_fs_put_super / xfs_fs_fill_super xfs_unmount is small and already pretty Linux specific, so merge it into the callers. The real unmount path is simplified a little by doing a WARN_ON on the xfs_unmount_flush retval directly instead of propagating the error back to the caller, and the mout failure case in simplified significantly by removing the forced shutdown case and all the dmapi events that shouldn't be sent because the dmapi mount event hasn't been sent by that time either. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31188a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 71 +++++++++++++++++++++++++++-- fs/xfs/xfs_vfsops.c | 87 ------------------------------------ fs/xfs/xfs_vfsops.h | 1 - 3 files changed, 67 insertions(+), 92 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index a3ecdf44246..28132e64395 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1087,14 +1087,61 @@ xfs_fs_put_super( struct super_block *sb) { struct xfs_mount *mp = XFS_M(sb); + struct xfs_inode *rip = mp->m_rootip; + int unmount_event_flags = 0; int error; kthread_stop(mp->m_sync_task); xfs_sync(mp, SYNC_ATTR | SYNC_DELWRI); - error = xfs_unmount(mp, 0, NULL); - if (error) - printk("XFS: unmount got error=%d\n", error); + +#ifdef HAVE_DMAPI + if (mp->m_flags & XFS_MOUNT_DMAPI) { + unmount_event_flags = + (mp->m_dmevmask & (1 << DM_EVENT_UNMOUNT)) ? + 0 : DM_FLAGS_UNWANTED; + /* + * Ignore error from dmapi here, first unmount is not allowed + * to fail anyway, and second we wouldn't want to fail a + * unmount because of dmapi. + */ + XFS_SEND_PREUNMOUNT(mp, rip, DM_RIGHT_NULL, rip, DM_RIGHT_NULL, + NULL, NULL, 0, 0, unmount_event_flags); + } +#endif + + /* + * Blow away any referenced inode in the filestreams cache. + * This can and will cause log traffic as inodes go inactive + * here. + */ + xfs_filestream_unmount(mp); + + XFS_bflush(mp->m_ddev_targp); + error = xfs_unmount_flush(mp, 0); + WARN_ON(error); + + IRELE(rip); + + /* + * If we're forcing a shutdown, typically because of a media error, + * we want to make sure we invalidate dirty pages that belong to + * referenced vnodes as well. + */ + if (XFS_FORCED_SHUTDOWN(mp)) { + error = xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE); + ASSERT(error != EFSCORRUPTED); + } + + if (mp->m_flags & XFS_MOUNT_DMAPI) { + XFS_SEND_UNMOUNT(mp, rip, DM_RIGHT_NULL, 0, 0, + unmount_event_flags); + } + + xfs_unmountfs(mp, NULL); + xfs_qmops_put(mp); + xfs_dmops_put(mp); + kmem_free(mp); } STATIC void @@ -1400,7 +1447,23 @@ fail_vnrele: } fail_unmount: - xfs_unmount(mp, 0, NULL); + /* + * Blow away any referenced inode in the filestreams cache. + * This can and will cause log traffic as inodes go inactive + * here. + */ + xfs_filestream_unmount(mp); + + XFS_bflush(mp->m_ddev_targp); + error = xfs_unmount_flush(mp, 0); + WARN_ON(error); + + IRELE(mp->m_rootip); + + xfs_unmountfs(mp, NULL); + xfs_qmops_put(mp); + xfs_dmops_put(mp); + kmem_free(mp); fail_vfsop: kmem_free(args); diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c index e223aeab68b..bc34f90e7ee 100644 --- a/fs/xfs/xfs_vfsops.c +++ b/fs/xfs/xfs_vfsops.c @@ -558,93 +558,6 @@ error0: return error; } -int -xfs_unmount( - xfs_mount_t *mp, - int flags, - cred_t *credp) -{ - xfs_inode_t *rip; - bhv_vnode_t *rvp; - int unmount_event_wanted = 0; - int unmount_event_flags = 0; - int xfs_unmountfs_needed = 0; - int error; - - rip = mp->m_rootip; - rvp = XFS_ITOV(rip); - -#ifdef HAVE_DMAPI - if (mp->m_flags & XFS_MOUNT_DMAPI) { - error = XFS_SEND_PREUNMOUNT(mp, - rip, DM_RIGHT_NULL, rip, DM_RIGHT_NULL, - NULL, NULL, 0, 0, - (mp->m_dmevmask & (1<m_dmevmask & (1<m_ddev_targp); - error = xfs_unmount_flush(mp, 0); - if (error) - goto out; - - ASSERT(vn_count(rvp) == 1); - - /* - * Drop the reference count - */ - IRELE(rip); - - /* - * If we're forcing a shutdown, typically because of a media error, - * we want to make sure we invalidate dirty pages that belong to - * referenced vnodes as well. - */ - if (XFS_FORCED_SHUTDOWN(mp)) { - error = xfs_sync(mp, SYNC_WAIT | SYNC_CLOSE); - ASSERT(error != EFSCORRUPTED); - } - xfs_unmountfs_needed = 1; - -out: - /* Send DMAPI event, if required. - * Then do xfs_unmountfs() if needed. - * Then return error (or zero). - */ - if (unmount_event_wanted) { - /* Note: mp structure must still exist for - * XFS_SEND_UNMOUNT() call. - */ - XFS_SEND_UNMOUNT(mp, error == 0 ? rip : NULL, - DM_RIGHT_NULL, 0, error, unmount_event_flags); - } - if (xfs_unmountfs_needed) { - /* - * Call common unmount function to flush to disk - * and free the super block buffer & mount structures. - */ - xfs_unmountfs(mp, credp); - xfs_qmops_put(mp); - xfs_dmops_put(mp); - kmem_free(mp); - } - - return XFS_ERROR(error); -} - STATIC void xfs_quiesce_fs( xfs_mount_t *mp) diff --git a/fs/xfs/xfs_vfsops.h b/fs/xfs/xfs_vfsops.h index 995091f1949..de64bb6542d 100644 --- a/fs/xfs/xfs_vfsops.h +++ b/fs/xfs/xfs_vfsops.h @@ -10,7 +10,6 @@ struct xfs_mount_args; int xfs_mount(struct xfs_mount *mp, struct xfs_mount_args *args, struct cred *credp); -int xfs_unmount(struct xfs_mount *mp, int flags, struct cred *credp); int xfs_sync(struct xfs_mount *mp, int flags); void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname, int lnnum); -- GitLab From f8f15e42b408edce6ca9e9d8bd0d0e2078a39efd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 11:30:59 +1000 Subject: [PATCH 0128/1024] [XFS] merge xfs_mount into xfs_fs_fill_super xfs_mount is already pretty linux-specific so merge it into xfs_fs_fill_super to allow for a more structured mount code in the next patches. xfs_start_flags and xfs_finish_flags also move to xfs_super.c. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31189a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 360 +++++++++++++++++++++++++++++++++- fs/xfs/xfs_vfsops.c | 369 ----------------------------------- fs/xfs/xfs_vfsops.h | 2 - 3 files changed, 355 insertions(+), 376 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 28132e64395..4b6ddf88d44 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1366,6 +1366,235 @@ xfs_fs_setxquota( Q_XSETPQLIM), id, (caddr_t)fdq); } +/* + * This function fills in xfs_mount_t fields based on mount args. + * Note: the superblock has _not_ yet been read in. + */ +STATIC int +xfs_start_flags( + struct xfs_mount_args *ap, + struct xfs_mount *mp) +{ + /* Values are in BBs */ + if ((ap->flags & XFSMNT_NOALIGN) != XFSMNT_NOALIGN) { + /* + * At this point the superblock has not been read + * in, therefore we do not know the block size. + * Before the mount call ends we will convert + * these to FSBs. + */ + mp->m_dalign = ap->sunit; + mp->m_swidth = ap->swidth; + } + + if (ap->logbufs != -1 && + ap->logbufs != 0 && + (ap->logbufs < XLOG_MIN_ICLOGS || + ap->logbufs > XLOG_MAX_ICLOGS)) { + cmn_err(CE_WARN, + "XFS: invalid logbufs value: %d [not %d-%d]", + ap->logbufs, XLOG_MIN_ICLOGS, XLOG_MAX_ICLOGS); + return XFS_ERROR(EINVAL); + } + mp->m_logbufs = ap->logbufs; + if (ap->logbufsize != -1 && + ap->logbufsize != 0 && + (ap->logbufsize < XLOG_MIN_RECORD_BSIZE || + ap->logbufsize > XLOG_MAX_RECORD_BSIZE || + !is_power_of_2(ap->logbufsize))) { + cmn_err(CE_WARN, + "XFS: invalid logbufsize: %d [not 16k,32k,64k,128k or 256k]", + ap->logbufsize); + return XFS_ERROR(EINVAL); + } + mp->m_logbsize = ap->logbufsize; + mp->m_fsname_len = strlen(ap->fsname) + 1; + mp->m_fsname = kmem_alloc(mp->m_fsname_len, KM_SLEEP); + strcpy(mp->m_fsname, ap->fsname); + if (ap->rtname[0]) { + mp->m_rtname = kmem_alloc(strlen(ap->rtname) + 1, KM_SLEEP); + strcpy(mp->m_rtname, ap->rtname); + } + if (ap->logname[0]) { + mp->m_logname = kmem_alloc(strlen(ap->logname) + 1, KM_SLEEP); + strcpy(mp->m_logname, ap->logname); + } + + if (ap->flags & XFSMNT_WSYNC) + mp->m_flags |= XFS_MOUNT_WSYNC; +#if XFS_BIG_INUMS + if (ap->flags & XFSMNT_INO64) { + mp->m_flags |= XFS_MOUNT_INO64; + mp->m_inoadd = XFS_INO64_OFFSET; + } +#endif + if (ap->flags & XFSMNT_RETERR) + mp->m_flags |= XFS_MOUNT_RETERR; + if (ap->flags & XFSMNT_NOALIGN) + mp->m_flags |= XFS_MOUNT_NOALIGN; + if (ap->flags & XFSMNT_SWALLOC) + mp->m_flags |= XFS_MOUNT_SWALLOC; + if (ap->flags & XFSMNT_OSYNCISOSYNC) + mp->m_flags |= XFS_MOUNT_OSYNCISOSYNC; + if (ap->flags & XFSMNT_32BITINODES) + mp->m_flags |= XFS_MOUNT_32BITINODES; + + if (ap->flags & XFSMNT_IOSIZE) { + if (ap->iosizelog > XFS_MAX_IO_LOG || + ap->iosizelog < XFS_MIN_IO_LOG) { + cmn_err(CE_WARN, + "XFS: invalid log iosize: %d [not %d-%d]", + ap->iosizelog, XFS_MIN_IO_LOG, + XFS_MAX_IO_LOG); + return XFS_ERROR(EINVAL); + } + + mp->m_flags |= XFS_MOUNT_DFLT_IOSIZE; + mp->m_readio_log = mp->m_writeio_log = ap->iosizelog; + } + + if (ap->flags & XFSMNT_IKEEP) + mp->m_flags |= XFS_MOUNT_IKEEP; + if (ap->flags & XFSMNT_DIRSYNC) + mp->m_flags |= XFS_MOUNT_DIRSYNC; + if (ap->flags & XFSMNT_ATTR2) + mp->m_flags |= XFS_MOUNT_ATTR2; + if (ap->flags & XFSMNT_NOATTR2) + mp->m_flags |= XFS_MOUNT_NOATTR2; + + if (ap->flags2 & XFSMNT2_COMPAT_IOSIZE) + mp->m_flags |= XFS_MOUNT_COMPAT_IOSIZE; + + /* + * no recovery flag requires a read-only mount + */ + if (ap->flags & XFSMNT_NORECOVERY) { + if (!(mp->m_flags & XFS_MOUNT_RDONLY)) { + cmn_err(CE_WARN, + "XFS: tried to mount a FS read-write without recovery!"); + return XFS_ERROR(EINVAL); + } + mp->m_flags |= XFS_MOUNT_NORECOVERY; + } + + if (ap->flags & XFSMNT_NOUUID) + mp->m_flags |= XFS_MOUNT_NOUUID; + if (ap->flags & XFSMNT_BARRIER) + mp->m_flags |= XFS_MOUNT_BARRIER; + else + mp->m_flags &= ~XFS_MOUNT_BARRIER; + + if (ap->flags2 & XFSMNT2_FILESTREAMS) + mp->m_flags |= XFS_MOUNT_FILESTREAMS; + + if (ap->flags & XFSMNT_DMAPI) + mp->m_flags |= XFS_MOUNT_DMAPI; + return 0; +} + +/* + * This function fills in xfs_mount_t fields based on mount args. + * Note: the superblock _has_ now been read in. + */ +STATIC int +xfs_finish_flags( + struct xfs_mount_args *ap, + struct xfs_mount *mp) +{ + int ronly = (mp->m_flags & XFS_MOUNT_RDONLY); + + /* Fail a mount where the logbuf is smaller then the log stripe */ + if (xfs_sb_version_haslogv2(&mp->m_sb)) { + if ((ap->logbufsize <= 0) && + (mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE)) { + mp->m_logbsize = mp->m_sb.sb_logsunit; + } else if (ap->logbufsize > 0 && + ap->logbufsize < mp->m_sb.sb_logsunit) { + cmn_err(CE_WARN, + "XFS: logbuf size must be greater than or equal to log stripe size"); + return XFS_ERROR(EINVAL); + } + } else { + /* Fail a mount if the logbuf is larger than 32K */ + if (ap->logbufsize > XLOG_BIG_RECORD_BSIZE) { + cmn_err(CE_WARN, + "XFS: logbuf size for version 1 logs must be 16K or 32K"); + return XFS_ERROR(EINVAL); + } + } + + /* + * mkfs'ed attr2 will turn on attr2 mount unless explicitly + * told by noattr2 to turn it off + */ + if (xfs_sb_version_hasattr2(&mp->m_sb) && + !(ap->flags & XFSMNT_NOATTR2)) + mp->m_flags |= XFS_MOUNT_ATTR2; + + /* + * prohibit r/w mounts of read-only filesystems + */ + if ((mp->m_sb.sb_flags & XFS_SBF_READONLY) && !ronly) { + cmn_err(CE_WARN, + "XFS: cannot mount a read-only filesystem as read-write"); + return XFS_ERROR(EROFS); + } + + /* + * check for shared mount. + */ + if (ap->flags & XFSMNT_SHARED) { + if (!xfs_sb_version_hasshared(&mp->m_sb)) + return XFS_ERROR(EINVAL); + + /* + * For IRIX 6.5, shared mounts must have the shared + * version bit set, have the persistent readonly + * field set, must be version 0 and can only be mounted + * read-only. + */ + if (!ronly || !(mp->m_sb.sb_flags & XFS_SBF_READONLY) || + (mp->m_sb.sb_shared_vn != 0)) + return XFS_ERROR(EINVAL); + + mp->m_flags |= XFS_MOUNT_SHARED; + + /* + * Shared XFS V0 can't deal with DMI. Return EINVAL. + */ + if (mp->m_sb.sb_shared_vn == 0 && (ap->flags & XFSMNT_DMAPI)) + return XFS_ERROR(EINVAL); + } + + if (ap->flags & XFSMNT_UQUOTA) { + mp->m_qflags |= (XFS_UQUOTA_ACCT | XFS_UQUOTA_ACTIVE); + if (ap->flags & XFSMNT_UQUOTAENF) + mp->m_qflags |= XFS_UQUOTA_ENFD; + } + + if (ap->flags & XFSMNT_GQUOTA) { + mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE); + if (ap->flags & XFSMNT_GQUOTAENF) + mp->m_qflags |= XFS_OQUOTA_ENFD; + } else if (ap->flags & XFSMNT_PQUOTA) { + mp->m_qflags |= (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE); + if (ap->flags & XFSMNT_PQUOTAENF) + mp->m_qflags |= XFS_OQUOTA_ENFD; + } + + return 0; +} + +/* + * The file system configurations are: + * (1) device (partition) with data and internal log + * (2) logical volume with data and log subvolumes. + * (3) logical volume with data, log, and realtime subvolumes. + * + * We only have to handle opening the log and realtime volumes here if + * they are present. The data subvolume has already been opened by + * get_sb_bdev() and is stored in vfsp->vfs_super->s_bdev. + */ STATIC int xfs_fs_fill_super( struct super_block *sb, @@ -1375,7 +1604,9 @@ xfs_fs_fill_super( struct inode *root; struct xfs_mount *mp = NULL; struct xfs_mount_args *args = xfs_args_allocate(sb, silent); - int error; + struct block_device *ddev = sb->s_bdev; + struct block_device *logdev = NULL, *rtdev = NULL; + int flags = 0, error; mp = xfs_mount_init(); @@ -1398,10 +1629,114 @@ xfs_fs_fill_super( sb->s_qcop = &xfs_quotactl_operations; sb->s_op = &xfs_super_operations; - error = xfs_mount(mp, args, NULL); + error = xfs_dmops_get(mp, args); + if (error) + goto fail_vfsop; + error = xfs_qmops_get(mp, args); if (error) goto fail_vfsop; + if (args->flags & XFSMNT_QUIET) + flags |= XFS_MFSI_QUIET; + + /* + * Open real time and log devices - order is important. + */ + if (args->logname[0]) { + error = xfs_blkdev_get(mp, args->logname, &logdev); + if (error) + goto fail_vfsop; + } + if (args->rtname[0]) { + error = xfs_blkdev_get(mp, args->rtname, &rtdev); + if (error) { + xfs_blkdev_put(logdev); + goto fail_vfsop; + } + + if (rtdev == ddev || rtdev == logdev) { + cmn_err(CE_WARN, + "XFS: Cannot mount filesystem with identical rtdev and ddev/logdev."); + xfs_blkdev_put(logdev); + xfs_blkdev_put(rtdev); + error = EINVAL; + goto fail_vfsop; + } + } + + /* + * Setup xfs_mount buffer target pointers + */ + error = ENOMEM; + mp->m_ddev_targp = xfs_alloc_buftarg(ddev, 0); + if (!mp->m_ddev_targp) { + xfs_blkdev_put(logdev); + xfs_blkdev_put(rtdev); + goto fail_vfsop; + } + if (rtdev) { + mp->m_rtdev_targp = xfs_alloc_buftarg(rtdev, 1); + if (!mp->m_rtdev_targp) { + xfs_blkdev_put(logdev); + xfs_blkdev_put(rtdev); + goto error0; + } + } + mp->m_logdev_targp = (logdev && logdev != ddev) ? + xfs_alloc_buftarg(logdev, 1) : mp->m_ddev_targp; + if (!mp->m_logdev_targp) { + xfs_blkdev_put(logdev); + xfs_blkdev_put(rtdev); + goto error0; + } + + /* + * Setup flags based on mount(2) options and then the superblock + */ + error = xfs_start_flags(args, mp); + if (error) + goto error1; + error = xfs_readsb(mp, flags); + if (error) + goto error1; + error = xfs_finish_flags(args, mp); + if (error) + goto error2; + + /* + * Setup xfs_mount buffer target pointers based on superblock + */ + error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_blocksize, + mp->m_sb.sb_sectsize); + if (!error && logdev && logdev != ddev) { + unsigned int log_sector_size = BBSIZE; + + if (xfs_sb_version_hassector(&mp->m_sb)) + log_sector_size = mp->m_sb.sb_logsectsize; + error = xfs_setsize_buftarg(mp->m_logdev_targp, + mp->m_sb.sb_blocksize, + log_sector_size); + } + if (!error && rtdev) + error = xfs_setsize_buftarg(mp->m_rtdev_targp, + mp->m_sb.sb_blocksize, + mp->m_sb.sb_sectsize); + if (error) + goto error2; + + if (mp->m_flags & XFS_MOUNT_BARRIER) + xfs_mountfs_check_barriers(mp); + + error = xfs_filestream_mount(mp); + if (error) + goto error2; + + error = xfs_mountfs(mp, flags); + if (error) + goto error2; + + XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, args->mtpt, args->fsname); + sb->s_dirt = 1; sb->s_magic = XFS_SB_MAGIC; sb->s_blocksize = mp->m_sb.sb_blocksize; @@ -1438,7 +1773,22 @@ xfs_fs_fill_super( kmem_free(args); return 0; -fail_vnrele: + error2: + if (mp->m_sb_bp) + xfs_freesb(mp); + error1: + xfs_binval(mp->m_ddev_targp); + if (logdev && logdev != ddev) + xfs_binval(mp->m_logdev_targp); + if (rtdev) + xfs_binval(mp->m_rtdev_targp); + error0: + xfs_unmountfs_close(mp, NULL); + xfs_qmops_put(mp); + xfs_dmops_put(mp); + goto fail_vfsop; + + fail_vnrele: if (sb->s_root) { dput(sb->s_root); sb->s_root = NULL; @@ -1446,7 +1796,7 @@ fail_vnrele: iput(root); } -fail_unmount: + fail_unmount: /* * Blow away any referenced inode in the filestreams cache. * This can and will cause log traffic as inodes go inactive @@ -1465,7 +1815,7 @@ fail_unmount: xfs_dmops_put(mp); kmem_free(mp); -fail_vfsop: + fail_vfsop: kmem_free(args); return -error; } diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c index bc34f90e7ee..8b5a3376c2f 100644 --- a/fs/xfs/xfs_vfsops.c +++ b/fs/xfs/xfs_vfsops.c @@ -189,375 +189,6 @@ xfs_cleanup(void) kmem_zone_destroy(xfs_log_ticket_zone); } -/* - * xfs_start_flags - * - * This function fills in xfs_mount_t fields based on mount args. - * Note: the superblock has _not_ yet been read in. - */ -STATIC int -xfs_start_flags( - struct xfs_mount_args *ap, - struct xfs_mount *mp) -{ - /* Values are in BBs */ - if ((ap->flags & XFSMNT_NOALIGN) != XFSMNT_NOALIGN) { - /* - * At this point the superblock has not been read - * in, therefore we do not know the block size. - * Before the mount call ends we will convert - * these to FSBs. - */ - mp->m_dalign = ap->sunit; - mp->m_swidth = ap->swidth; - } - - if (ap->logbufs != -1 && - ap->logbufs != 0 && - (ap->logbufs < XLOG_MIN_ICLOGS || - ap->logbufs > XLOG_MAX_ICLOGS)) { - cmn_err(CE_WARN, - "XFS: invalid logbufs value: %d [not %d-%d]", - ap->logbufs, XLOG_MIN_ICLOGS, XLOG_MAX_ICLOGS); - return XFS_ERROR(EINVAL); - } - mp->m_logbufs = ap->logbufs; - if (ap->logbufsize != -1 && - ap->logbufsize != 0 && - (ap->logbufsize < XLOG_MIN_RECORD_BSIZE || - ap->logbufsize > XLOG_MAX_RECORD_BSIZE || - !is_power_of_2(ap->logbufsize))) { - cmn_err(CE_WARN, - "XFS: invalid logbufsize: %d [not 16k,32k,64k,128k or 256k]", - ap->logbufsize); - return XFS_ERROR(EINVAL); - } - mp->m_logbsize = ap->logbufsize; - mp->m_fsname_len = strlen(ap->fsname) + 1; - mp->m_fsname = kmem_alloc(mp->m_fsname_len, KM_SLEEP); - strcpy(mp->m_fsname, ap->fsname); - if (ap->rtname[0]) { - mp->m_rtname = kmem_alloc(strlen(ap->rtname) + 1, KM_SLEEP); - strcpy(mp->m_rtname, ap->rtname); - } - if (ap->logname[0]) { - mp->m_logname = kmem_alloc(strlen(ap->logname) + 1, KM_SLEEP); - strcpy(mp->m_logname, ap->logname); - } - - if (ap->flags & XFSMNT_WSYNC) - mp->m_flags |= XFS_MOUNT_WSYNC; -#if XFS_BIG_INUMS - if (ap->flags & XFSMNT_INO64) { - mp->m_flags |= XFS_MOUNT_INO64; - mp->m_inoadd = XFS_INO64_OFFSET; - } -#endif - if (ap->flags & XFSMNT_RETERR) - mp->m_flags |= XFS_MOUNT_RETERR; - if (ap->flags & XFSMNT_NOALIGN) - mp->m_flags |= XFS_MOUNT_NOALIGN; - if (ap->flags & XFSMNT_SWALLOC) - mp->m_flags |= XFS_MOUNT_SWALLOC; - if (ap->flags & XFSMNT_OSYNCISOSYNC) - mp->m_flags |= XFS_MOUNT_OSYNCISOSYNC; - if (ap->flags & XFSMNT_32BITINODES) - mp->m_flags |= XFS_MOUNT_32BITINODES; - - if (ap->flags & XFSMNT_IOSIZE) { - if (ap->iosizelog > XFS_MAX_IO_LOG || - ap->iosizelog < XFS_MIN_IO_LOG) { - cmn_err(CE_WARN, - "XFS: invalid log iosize: %d [not %d-%d]", - ap->iosizelog, XFS_MIN_IO_LOG, - XFS_MAX_IO_LOG); - return XFS_ERROR(EINVAL); - } - - mp->m_flags |= XFS_MOUNT_DFLT_IOSIZE; - mp->m_readio_log = mp->m_writeio_log = ap->iosizelog; - } - - if (ap->flags & XFSMNT_IKEEP) - mp->m_flags |= XFS_MOUNT_IKEEP; - if (ap->flags & XFSMNT_DIRSYNC) - mp->m_flags |= XFS_MOUNT_DIRSYNC; - if (ap->flags & XFSMNT_ATTR2) - mp->m_flags |= XFS_MOUNT_ATTR2; - if (ap->flags & XFSMNT_NOATTR2) - mp->m_flags |= XFS_MOUNT_NOATTR2; - - if (ap->flags2 & XFSMNT2_COMPAT_IOSIZE) - mp->m_flags |= XFS_MOUNT_COMPAT_IOSIZE; - - /* - * no recovery flag requires a read-only mount - */ - if (ap->flags & XFSMNT_NORECOVERY) { - if (!(mp->m_flags & XFS_MOUNT_RDONLY)) { - cmn_err(CE_WARN, - "XFS: tried to mount a FS read-write without recovery!"); - return XFS_ERROR(EINVAL); - } - mp->m_flags |= XFS_MOUNT_NORECOVERY; - } - - if (ap->flags & XFSMNT_NOUUID) - mp->m_flags |= XFS_MOUNT_NOUUID; - if (ap->flags & XFSMNT_BARRIER) - mp->m_flags |= XFS_MOUNT_BARRIER; - else - mp->m_flags &= ~XFS_MOUNT_BARRIER; - - if (ap->flags2 & XFSMNT2_FILESTREAMS) - mp->m_flags |= XFS_MOUNT_FILESTREAMS; - - if (ap->flags & XFSMNT_DMAPI) - mp->m_flags |= XFS_MOUNT_DMAPI; - return 0; -} - -/* - * This function fills in xfs_mount_t fields based on mount args. - * Note: the superblock _has_ now been read in. - */ -STATIC int -xfs_finish_flags( - struct xfs_mount_args *ap, - struct xfs_mount *mp) -{ - int ronly = (mp->m_flags & XFS_MOUNT_RDONLY); - - /* Fail a mount where the logbuf is smaller then the log stripe */ - if (xfs_sb_version_haslogv2(&mp->m_sb)) { - if ((ap->logbufsize <= 0) && - (mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE)) { - mp->m_logbsize = mp->m_sb.sb_logsunit; - } else if (ap->logbufsize > 0 && - ap->logbufsize < mp->m_sb.sb_logsunit) { - cmn_err(CE_WARN, - "XFS: logbuf size must be greater than or equal to log stripe size"); - return XFS_ERROR(EINVAL); - } - } else { - /* Fail a mount if the logbuf is larger than 32K */ - if (ap->logbufsize > XLOG_BIG_RECORD_BSIZE) { - cmn_err(CE_WARN, - "XFS: logbuf size for version 1 logs must be 16K or 32K"); - return XFS_ERROR(EINVAL); - } - } - - /* - * mkfs'ed attr2 will turn on attr2 mount unless explicitly - * told by noattr2 to turn it off - */ - if (xfs_sb_version_hasattr2(&mp->m_sb) && - !(ap->flags & XFSMNT_NOATTR2)) - mp->m_flags |= XFS_MOUNT_ATTR2; - - /* - * prohibit r/w mounts of read-only filesystems - */ - if ((mp->m_sb.sb_flags & XFS_SBF_READONLY) && !ronly) { - cmn_err(CE_WARN, - "XFS: cannot mount a read-only filesystem as read-write"); - return XFS_ERROR(EROFS); - } - - /* - * check for shared mount. - */ - if (ap->flags & XFSMNT_SHARED) { - if (!xfs_sb_version_hasshared(&mp->m_sb)) - return XFS_ERROR(EINVAL); - - /* - * For IRIX 6.5, shared mounts must have the shared - * version bit set, have the persistent readonly - * field set, must be version 0 and can only be mounted - * read-only. - */ - if (!ronly || !(mp->m_sb.sb_flags & XFS_SBF_READONLY) || - (mp->m_sb.sb_shared_vn != 0)) - return XFS_ERROR(EINVAL); - - mp->m_flags |= XFS_MOUNT_SHARED; - - /* - * Shared XFS V0 can't deal with DMI. Return EINVAL. - */ - if (mp->m_sb.sb_shared_vn == 0 && (ap->flags & XFSMNT_DMAPI)) - return XFS_ERROR(EINVAL); - } - - if (ap->flags & XFSMNT_UQUOTA) { - mp->m_qflags |= (XFS_UQUOTA_ACCT | XFS_UQUOTA_ACTIVE); - if (ap->flags & XFSMNT_UQUOTAENF) - mp->m_qflags |= XFS_UQUOTA_ENFD; - } - - if (ap->flags & XFSMNT_GQUOTA) { - mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE); - if (ap->flags & XFSMNT_GQUOTAENF) - mp->m_qflags |= XFS_OQUOTA_ENFD; - } else if (ap->flags & XFSMNT_PQUOTA) { - mp->m_qflags |= (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE); - if (ap->flags & XFSMNT_PQUOTAENF) - mp->m_qflags |= XFS_OQUOTA_ENFD; - } - - return 0; -} - -/* - * xfs_mount - * - * The file system configurations are: - * (1) device (partition) with data and internal log - * (2) logical volume with data and log subvolumes. - * (3) logical volume with data, log, and realtime subvolumes. - * - * We only have to handle opening the log and realtime volumes here if - * they are present. The data subvolume has already been opened by - * get_sb_bdev() and is stored in vfsp->vfs_super->s_bdev. - */ -int -xfs_mount( - struct xfs_mount *mp, - struct xfs_mount_args *args, - cred_t *credp) -{ - struct block_device *ddev, *logdev, *rtdev; - int flags = 0, error; - - ddev = mp->m_super->s_bdev; - logdev = rtdev = NULL; - - error = xfs_dmops_get(mp, args); - if (error) - return error; - error = xfs_qmops_get(mp, args); - if (error) - return error; - - if (args->flags & XFSMNT_QUIET) - flags |= XFS_MFSI_QUIET; - - /* - * Open real time and log devices - order is important. - */ - if (args->logname[0]) { - error = xfs_blkdev_get(mp, args->logname, &logdev); - if (error) - return error; - } - if (args->rtname[0]) { - error = xfs_blkdev_get(mp, args->rtname, &rtdev); - if (error) { - xfs_blkdev_put(logdev); - return error; - } - - if (rtdev == ddev || rtdev == logdev) { - cmn_err(CE_WARN, - "XFS: Cannot mount filesystem with identical rtdev and ddev/logdev."); - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - return EINVAL; - } - } - - /* - * Setup xfs_mount buffer target pointers - */ - error = ENOMEM; - mp->m_ddev_targp = xfs_alloc_buftarg(ddev, 0); - if (!mp->m_ddev_targp) { - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - return error; - } - if (rtdev) { - mp->m_rtdev_targp = xfs_alloc_buftarg(rtdev, 1); - if (!mp->m_rtdev_targp) { - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - goto error0; - } - } - mp->m_logdev_targp = (logdev && logdev != ddev) ? - xfs_alloc_buftarg(logdev, 1) : mp->m_ddev_targp; - if (!mp->m_logdev_targp) { - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - goto error0; - } - - /* - * Setup flags based on mount(2) options and then the superblock - */ - error = xfs_start_flags(args, mp); - if (error) - goto error1; - error = xfs_readsb(mp, flags); - if (error) - goto error1; - error = xfs_finish_flags(args, mp); - if (error) - goto error2; - - /* - * Setup xfs_mount buffer target pointers based on superblock - */ - error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_blocksize, - mp->m_sb.sb_sectsize); - if (!error && logdev && logdev != ddev) { - unsigned int log_sector_size = BBSIZE; - - if (xfs_sb_version_hassector(&mp->m_sb)) - log_sector_size = mp->m_sb.sb_logsectsize; - error = xfs_setsize_buftarg(mp->m_logdev_targp, - mp->m_sb.sb_blocksize, - log_sector_size); - } - if (!error && rtdev) - error = xfs_setsize_buftarg(mp->m_rtdev_targp, - mp->m_sb.sb_blocksize, - mp->m_sb.sb_sectsize); - if (error) - goto error2; - - if (mp->m_flags & XFS_MOUNT_BARRIER) - xfs_mountfs_check_barriers(mp); - - if ((error = xfs_filestream_mount(mp))) - goto error2; - - error = xfs_mountfs(mp, flags); - if (error) - goto error2; - - XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, args->mtpt, args->fsname); - - return 0; - -error2: - if (mp->m_sb_bp) - xfs_freesb(mp); -error1: - xfs_binval(mp->m_ddev_targp); - if (logdev && logdev != ddev) - xfs_binval(mp->m_logdev_targp); - if (rtdev) - xfs_binval(mp->m_rtdev_targp); -error0: - xfs_unmountfs_close(mp, credp); - xfs_qmops_put(mp); - xfs_dmops_put(mp); - return error; -} - STATIC void xfs_quiesce_fs( xfs_mount_t *mp) diff --git a/fs/xfs/xfs_vfsops.h b/fs/xfs/xfs_vfsops.h index de64bb6542d..a74b05087da 100644 --- a/fs/xfs/xfs_vfsops.h +++ b/fs/xfs/xfs_vfsops.h @@ -8,8 +8,6 @@ struct kstatfs; struct xfs_mount; struct xfs_mount_args; -int xfs_mount(struct xfs_mount *mp, struct xfs_mount_args *args, - struct cred *credp); int xfs_sync(struct xfs_mount *mp, int flags); void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname, int lnnum); -- GitLab From af15b8953a60d336aade96a2c162abffdba75ec9 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 11:31:05 +1000 Subject: [PATCH 0129/1024] [XFS] don't call xfs_freesb from xfs_mountfs failure case Freeing of the superblock is already handled in the caller, and that is more symmetric with the mount path, too. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31192a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_mount.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index fca3f8af674..ee5df5fae82 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -1268,7 +1268,6 @@ xfs_mountfs( error1: if (uuid_mounted) uuid_table_remove(&mp->m_sb.sb_uuid); - xfs_freesb(mp); return error; } -- GitLab From 19f354d4c3f4c48bf6b2a86227d8e3050e5f7d50 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 11:31:13 +1000 Subject: [PATCH 0130/1024] [XFS] sort out opening and closing of the block devices Currently closing the rt/log block device is done in the wrong spot, and far too early. So revampt it: - xfs_blkdev_put moved out of xfs_free_buftarg into the caller so that it is done after tearing down the buftarg completely. - call to xfs_unmountfs_close moved from xfs_mountfs into caller so that it's done after tearing down the filesystem completely. - xfs_unmountfs_close is renamed to xfs_close_devices and made static in xfs_super.c - opening of the block devices is split into a helper xfs_open_devices that is symetric in use to xfs_close_devices - xfs_unmountfs can now lose struct cred - error handling around device opening sanitized in xfs_fs_fill_super SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31193a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_buf.c | 5 +- fs/xfs/linux-2.6/xfs_buf.h | 2 +- fs/xfs/linux-2.6/xfs_super.c | 192 ++++++++++++++++++++++------------- fs/xfs/linux-2.6/xfs_super.h | 3 - fs/xfs/xfs_mount.c | 13 +-- fs/xfs/xfs_mount.h | 3 +- 6 files changed, 123 insertions(+), 95 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c index ed03c6d3c9c..9cc8f021309 100644 --- a/fs/xfs/linux-2.6/xfs_buf.c +++ b/fs/xfs/linux-2.6/xfs_buf.c @@ -1427,13 +1427,10 @@ xfs_unregister_buftarg( void xfs_free_buftarg( - xfs_buftarg_t *btp, - int external) + xfs_buftarg_t *btp) { xfs_flush_buftarg(btp, 1); xfs_blkdev_issue_flush(btp); - if (external) - xfs_blkdev_put(btp->bt_bdev); xfs_free_bufhash(btp); iput(btp->bt_mapping->host); diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h index f948ec7ba9a..29d1d4adc07 100644 --- a/fs/xfs/linux-2.6/xfs_buf.h +++ b/fs/xfs/linux-2.6/xfs_buf.h @@ -429,7 +429,7 @@ static inline void xfs_bdwrite(void *mp, xfs_buf_t *bp) * Handling of buftargs. */ extern xfs_buftarg_t *xfs_alloc_buftarg(struct block_device *, int); -extern void xfs_free_buftarg(xfs_buftarg_t *, int); +extern void xfs_free_buftarg(xfs_buftarg_t *); extern void xfs_wait_buftarg(xfs_buftarg_t *); extern int xfs_setsize_buftarg(xfs_buftarg_t *, unsigned int, unsigned int); extern int xfs_flush_buftarg(xfs_buftarg_t *, int); diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 4b6ddf88d44..055faa06ca2 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -766,6 +766,103 @@ xfs_blkdev_issue_flush( blkdev_issue_flush(buftarg->bt_bdev, NULL); } +STATIC void +xfs_close_devices( + struct xfs_mount *mp) +{ + if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) { + xfs_free_buftarg(mp->m_logdev_targp); + xfs_blkdev_put(mp->m_logdev_targp->bt_bdev); + } + if (mp->m_rtdev_targp) { + xfs_free_buftarg(mp->m_rtdev_targp); + xfs_blkdev_put(mp->m_rtdev_targp->bt_bdev); + } + xfs_free_buftarg(mp->m_ddev_targp); +} + +/* + * The file system configurations are: + * (1) device (partition) with data and internal log + * (2) logical volume with data and log subvolumes. + * (3) logical volume with data, log, and realtime subvolumes. + * + * We only have to handle opening the log and realtime volumes here if + * they are present. The data subvolume has already been opened by + * get_sb_bdev() and is stored in sb->s_bdev. + */ +STATIC int +xfs_open_devices( + struct xfs_mount *mp, + struct xfs_mount_args *args) +{ + struct block_device *ddev = mp->m_super->s_bdev; + struct block_device *logdev = NULL, *rtdev = NULL; + int error; + + /* + * Open real time and log devices - order is important. + */ + if (args->logname[0]) { + error = xfs_blkdev_get(mp, args->logname, &logdev); + if (error) + goto out; + } + + if (args->rtname[0]) { + error = xfs_blkdev_get(mp, args->rtname, &rtdev); + if (error) + goto out_close_logdev; + + if (rtdev == ddev || rtdev == logdev) { + cmn_err(CE_WARN, + "XFS: Cannot mount filesystem with identical rtdev and ddev/logdev."); + error = EINVAL; + goto out_close_rtdev; + } + } + + /* + * Setup xfs_mount buffer target pointers + */ + error = ENOMEM; + mp->m_ddev_targp = xfs_alloc_buftarg(ddev, 0); + if (!mp->m_ddev_targp) + goto out_close_rtdev; + + if (rtdev) { + mp->m_rtdev_targp = xfs_alloc_buftarg(rtdev, 1); + if (!mp->m_rtdev_targp) + goto out_free_ddev_targ; + } + + if (logdev && logdev != ddev) { + mp->m_logdev_targp = xfs_alloc_buftarg(logdev, 1); + if (!mp->m_logdev_targp) + goto out_free_rtdev_targ; + } else { + mp->m_logdev_targp = mp->m_ddev_targp; + } + + return 0; + + out_free_rtdev_targ: + if (mp->m_rtdev_targp) + xfs_free_buftarg(mp->m_rtdev_targp); + out_free_ddev_targ: + xfs_free_buftarg(mp->m_ddev_targp); + out_close_rtdev: + if (rtdev) + xfs_blkdev_put(rtdev); + out_close_logdev: + if (logdev && logdev != ddev) + xfs_blkdev_put(logdev); + out: + return error; +} + + + /* * XFS AIL push thread support */ @@ -1138,7 +1235,8 @@ xfs_fs_put_super( unmount_event_flags); } - xfs_unmountfs(mp, NULL); + xfs_unmountfs(mp); + xfs_close_devices(mp); xfs_qmops_put(mp); xfs_dmops_put(mp); kmem_free(mp); @@ -1585,16 +1683,6 @@ xfs_finish_flags( return 0; } -/* - * The file system configurations are: - * (1) device (partition) with data and internal log - * (2) logical volume with data and log subvolumes. - * (3) logical volume with data, log, and realtime subvolumes. - * - * We only have to handle opening the log and realtime volumes here if - * they are present. The data subvolume has already been opened by - * get_sb_bdev() and is stored in vfsp->vfs_super->s_bdev. - */ STATIC int xfs_fs_fill_super( struct super_block *sb, @@ -1604,8 +1692,6 @@ xfs_fs_fill_super( struct inode *root; struct xfs_mount *mp = NULL; struct xfs_mount_args *args = xfs_args_allocate(sb, silent); - struct block_device *ddev = sb->s_bdev; - struct block_device *logdev = NULL, *rtdev = NULL; int flags = 0, error; mp = xfs_mount_init(); @@ -1634,61 +1720,14 @@ xfs_fs_fill_super( goto fail_vfsop; error = xfs_qmops_get(mp, args); if (error) - goto fail_vfsop; + goto out_put_dmops; if (args->flags & XFSMNT_QUIET) flags |= XFS_MFSI_QUIET; - /* - * Open real time and log devices - order is important. - */ - if (args->logname[0]) { - error = xfs_blkdev_get(mp, args->logname, &logdev); - if (error) - goto fail_vfsop; - } - if (args->rtname[0]) { - error = xfs_blkdev_get(mp, args->rtname, &rtdev); - if (error) { - xfs_blkdev_put(logdev); - goto fail_vfsop; - } - - if (rtdev == ddev || rtdev == logdev) { - cmn_err(CE_WARN, - "XFS: Cannot mount filesystem with identical rtdev and ddev/logdev."); - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - error = EINVAL; - goto fail_vfsop; - } - } - - /* - * Setup xfs_mount buffer target pointers - */ - error = ENOMEM; - mp->m_ddev_targp = xfs_alloc_buftarg(ddev, 0); - if (!mp->m_ddev_targp) { - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - goto fail_vfsop; - } - if (rtdev) { - mp->m_rtdev_targp = xfs_alloc_buftarg(rtdev, 1); - if (!mp->m_rtdev_targp) { - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - goto error0; - } - } - mp->m_logdev_targp = (logdev && logdev != ddev) ? - xfs_alloc_buftarg(logdev, 1) : mp->m_ddev_targp; - if (!mp->m_logdev_targp) { - xfs_blkdev_put(logdev); - xfs_blkdev_put(rtdev); - goto error0; - } + error = xfs_open_devices(mp, args); + if (error) + goto out_put_qmops; /* * Setup flags based on mount(2) options and then the superblock @@ -1708,7 +1747,9 @@ xfs_fs_fill_super( */ error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_blocksize, mp->m_sb.sb_sectsize); - if (!error && logdev && logdev != ddev) { + if (error) + goto error2; + if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) { unsigned int log_sector_size = BBSIZE; if (xfs_sb_version_hassector(&mp->m_sb)) @@ -1716,13 +1757,16 @@ xfs_fs_fill_super( error = xfs_setsize_buftarg(mp->m_logdev_targp, mp->m_sb.sb_blocksize, log_sector_size); + if (error) + goto error2; } - if (!error && rtdev) + if (mp->m_rtdev_targp) { error = xfs_setsize_buftarg(mp->m_rtdev_targp, mp->m_sb.sb_blocksize, mp->m_sb.sb_sectsize); - if (error) - goto error2; + if (error) + goto error2; + } if (mp->m_flags & XFS_MOUNT_BARRIER) xfs_mountfs_check_barriers(mp); @@ -1778,13 +1822,14 @@ xfs_fs_fill_super( xfs_freesb(mp); error1: xfs_binval(mp->m_ddev_targp); - if (logdev && logdev != ddev) + if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) xfs_binval(mp->m_logdev_targp); - if (rtdev) + if (mp->m_rtdev_targp) xfs_binval(mp->m_rtdev_targp); - error0: - xfs_unmountfs_close(mp, NULL); + xfs_close_devices(mp); + out_put_qmops: xfs_qmops_put(mp); + out_put_dmops: xfs_dmops_put(mp); goto fail_vfsop; @@ -1810,7 +1855,8 @@ xfs_fs_fill_super( IRELE(mp->m_rootip); - xfs_unmountfs(mp, NULL); + xfs_unmountfs(mp); + xfs_close_devices(mp); xfs_qmops_put(mp); xfs_dmops_put(mp); kmem_free(mp); diff --git a/fs/xfs/linux-2.6/xfs_super.h b/fs/xfs/linux-2.6/xfs_super.h index 3efb7c6d330..212bdc7a789 100644 --- a/fs/xfs/linux-2.6/xfs_super.h +++ b/fs/xfs/linux-2.6/xfs_super.h @@ -107,9 +107,6 @@ extern void xfs_initialize_vnode(struct xfs_mount *mp, bhv_vnode_t *vp, extern void xfs_flush_inode(struct xfs_inode *); extern void xfs_flush_device(struct xfs_inode *); -extern int xfs_blkdev_get(struct xfs_mount *, const char *, - struct block_device **); -extern void xfs_blkdev_put(struct block_device *); extern void xfs_blkdev_issue_flush(struct xfs_buftarg *); extern const struct export_operations xfs_export_operations; diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index ee5df5fae82..c67f8a9ae41 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -1278,7 +1278,7 @@ xfs_mountfs( * log and makes sure that incore structures are freed. */ int -xfs_unmountfs(xfs_mount_t *mp, struct cred *cr) +xfs_unmountfs(xfs_mount_t *mp) { __uint64_t resblks; int error = 0; @@ -1345,7 +1345,6 @@ xfs_unmountfs(xfs_mount_t *mp, struct cred *cr) */ ASSERT(mp->m_inodes == NULL); - xfs_unmountfs_close(mp, cr); if ((mp->m_flags & XFS_MOUNT_NOUUID) == 0) uuid_table_remove(&mp->m_sb.sb_uuid); @@ -1356,16 +1355,6 @@ xfs_unmountfs(xfs_mount_t *mp, struct cred *cr) return 0; } -void -xfs_unmountfs_close(xfs_mount_t *mp, struct cred *cr) -{ - if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) - xfs_free_buftarg(mp->m_logdev_targp, 1); - if (mp->m_rtdev_targp) - xfs_free_buftarg(mp->m_rtdev_targp, 1); - xfs_free_buftarg(mp->m_ddev_targp, 0); -} - STATIC void xfs_unmountfs_wait(xfs_mount_t *mp) { diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index 4aff0c125ad..5acde7fd9c0 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -518,8 +518,7 @@ extern void xfs_mount_free(xfs_mount_t *mp); extern int xfs_mountfs(xfs_mount_t *mp, int); extern void xfs_mountfs_check_barriers(xfs_mount_t *mp); -extern int xfs_unmountfs(xfs_mount_t *, struct cred *); -extern void xfs_unmountfs_close(xfs_mount_t *, struct cred *); +extern int xfs_unmountfs(xfs_mount_t *); extern int xfs_unmountfs_writesb(xfs_mount_t *); extern int xfs_unmount_flush(xfs_mount_t *, int); extern int xfs_mod_incore_sb(xfs_mount_t *, xfs_sb_field_t, int64_t, int); -- GitLab From e34b562c6bbffc3c466251ffa1d2adaf163db566 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 15:10:36 +1000 Subject: [PATCH 0131/1024] [XFS] add xfs_setup_devices helper Split setting the block and sector size out of xfs_fs_fill_super into a small helper to make xfs_fs_fill_super more readable. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31194a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 58 ++++++++++++++++++++++-------------- 1 file changed, 35 insertions(+), 23 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 055faa06ca2..613370f9a4b 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -861,7 +861,41 @@ xfs_open_devices( return error; } +/* + * Setup xfs_mount buffer target pointers based on superblock + */ +STATIC int +xfs_setup_devices( + struct xfs_mount *mp) +{ + int error; + error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_blocksize, + mp->m_sb.sb_sectsize); + if (error) + return error; + + if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) { + unsigned int log_sector_size = BBSIZE; + + if (xfs_sb_version_hassector(&mp->m_sb)) + log_sector_size = mp->m_sb.sb_logsectsize; + error = xfs_setsize_buftarg(mp->m_logdev_targp, + mp->m_sb.sb_blocksize, + log_sector_size); + if (error) + return error; + } + if (mp->m_rtdev_targp) { + error = xfs_setsize_buftarg(mp->m_rtdev_targp, + mp->m_sb.sb_blocksize, + mp->m_sb.sb_sectsize); + if (error) + return error; + } + + return 0; +} /* * XFS AIL push thread support @@ -1742,31 +1776,9 @@ xfs_fs_fill_super( if (error) goto error2; - /* - * Setup xfs_mount buffer target pointers based on superblock - */ - error = xfs_setsize_buftarg(mp->m_ddev_targp, mp->m_sb.sb_blocksize, - mp->m_sb.sb_sectsize); + error = xfs_setup_devices(mp); if (error) goto error2; - if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) { - unsigned int log_sector_size = BBSIZE; - - if (xfs_sb_version_hassector(&mp->m_sb)) - log_sector_size = mp->m_sb.sb_logsectsize; - error = xfs_setsize_buftarg(mp->m_logdev_targp, - mp->m_sb.sb_blocksize, - log_sector_size); - if (error) - goto error2; - } - if (mp->m_rtdev_targp) { - error = xfs_setsize_buftarg(mp->m_rtdev_targp, - mp->m_sb.sb_blocksize, - mp->m_sb.sb_sectsize); - if (error) - goto error2; - } if (mp->m_flags & XFS_MOUNT_BARRIER) xfs_mountfs_check_barriers(mp); -- GitLab From bdd907bab78419f34113c51470192945741b839e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 15:10:44 +1000 Subject: [PATCH 0132/1024] [XFS] allow xfs_args_allocate to fail Switch xfs_args_allocate to kzalloc and handle failures. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31195a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 613370f9a4b..d13d883d003 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -75,7 +75,10 @@ xfs_args_allocate( { struct xfs_mount_args *args; - args = kmem_zalloc(sizeof(struct xfs_mount_args), KM_SLEEP); + args = kzalloc(sizeof(struct xfs_mount_args), GFP_KERNEL); + if (!args) + return NULL; + args->logbufs = args->logbufsize = -1; strncpy(args->fsname, sb->s_id, MAXNAMELEN); @@ -1396,9 +1399,13 @@ xfs_fs_remount( char *options) { struct xfs_mount *mp = XFS_M(sb); - struct xfs_mount_args *args = xfs_args_allocate(sb, 0); + struct xfs_mount_args *args; int error; + args = xfs_args_allocate(sb, 0); + if (!args) + return -ENOMEM; + error = xfs_parseargs(mp, options, args, 1); if (error) goto out_free_args; @@ -1420,7 +1427,7 @@ xfs_fs_remount( } out_free_args: - kmem_free(args); + kfree(args); return -error; } @@ -1725,9 +1732,13 @@ xfs_fs_fill_super( { struct inode *root; struct xfs_mount *mp = NULL; - struct xfs_mount_args *args = xfs_args_allocate(sb, silent); + struct xfs_mount_args *args; int flags = 0, error; + args = xfs_args_allocate(sb, silent); + if (!args) + return -ENOMEM; + mp = xfs_mount_init(); INIT_LIST_HEAD(&mp->m_sync_list); @@ -1826,7 +1837,7 @@ xfs_fs_fill_super( xfs_itrace_exit(XFS_I(sb->s_root->d_inode)); - kmem_free(args); + kfree(args); return 0; error2: @@ -1874,7 +1885,7 @@ xfs_fs_fill_super( kmem_free(mp); fail_vfsop: - kmem_free(args); + kfree(args); return -error; } -- GitLab From c962fb7902669a48a2c613649c1f03865c0ffd1e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 15:10:52 +1000 Subject: [PATCH 0133/1024] [XFS] kill xfs_mount_init xfs_mount_init is inlined into xfs_fs_fill_super and allocation switched to kzalloc. Plug a leak of the mount structure for most early mount failures. Move xfs_icsb_init_counters to as late as possible in the mount path and make sure to undo it so that no stale hotplug cpu notifiers are left around on mount failures. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31196a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 37 ++++++++++++++++++++++-------------- fs/xfs/xfs_mount.c | 30 ++--------------------------- fs/xfs/xfs_mount.h | 8 ++++---- 3 files changed, 29 insertions(+), 46 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index d13d883d003..fe52e9276aa 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1273,10 +1273,11 @@ xfs_fs_put_super( } xfs_unmountfs(mp); + xfs_icsb_destroy_counters(mp); xfs_close_devices(mp); xfs_qmops_put(mp); xfs_dmops_put(mp); - kmem_free(mp); + kfree(mp); } STATIC void @@ -1733,14 +1734,20 @@ xfs_fs_fill_super( struct inode *root; struct xfs_mount *mp = NULL; struct xfs_mount_args *args; - int flags = 0, error; + int flags = 0, error = ENOMEM; args = xfs_args_allocate(sb, silent); if (!args) return -ENOMEM; - mp = xfs_mount_init(); + mp = kzalloc(sizeof(struct xfs_mount), GFP_KERNEL); + if (!mp) + goto out_free_args; + spin_lock_init(&mp->m_sb_lock); + mutex_init(&mp->m_ilock); + mutex_init(&mp->m_growlock); + atomic_set(&mp->m_active_trans, 0); INIT_LIST_HEAD(&mp->m_sync_list); spin_lock_init(&mp->m_sync_lock); init_waitqueue_head(&mp->m_wait_single_sync_task); @@ -1753,7 +1760,7 @@ xfs_fs_fill_super( error = xfs_parseargs(mp, (char *)data, args, 0); if (error) - goto fail_vfsop; + goto out_free_mp; sb_min_blocksize(sb, BBSIZE); sb->s_export_op = &xfs_export_operations; @@ -1762,7 +1769,7 @@ xfs_fs_fill_super( error = xfs_dmops_get(mp, args); if (error) - goto fail_vfsop; + goto out_free_mp; error = xfs_qmops_get(mp, args); if (error) goto out_put_dmops; @@ -1774,6 +1781,9 @@ xfs_fs_fill_super( if (error) goto out_put_qmops; + if (xfs_icsb_init_counters(mp)) + mp->m_flags |= XFS_MOUNT_NO_PERCPU_SB; + /* * Setup flags based on mount(2) options and then the superblock */ @@ -1849,12 +1859,18 @@ xfs_fs_fill_super( xfs_binval(mp->m_logdev_targp); if (mp->m_rtdev_targp) xfs_binval(mp->m_rtdev_targp); + out_destroy_counters: + xfs_icsb_destroy_counters(mp); xfs_close_devices(mp); out_put_qmops: xfs_qmops_put(mp); out_put_dmops: xfs_dmops_put(mp); - goto fail_vfsop; + out_free_mp: + kfree(mp); + out_free_args: + kfree(args); + return -error; fail_vnrele: if (sb->s_root) { @@ -1879,14 +1895,7 @@ xfs_fs_fill_super( IRELE(mp->m_rootip); xfs_unmountfs(mp); - xfs_close_devices(mp); - xfs_qmops_put(mp); - xfs_dmops_put(mp); - kmem_free(mp); - - fail_vfsop: - kfree(args); - return -error; + goto out_destroy_counters; } STATIC int diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index c67f8a9ae41..1bfaa204f68 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -51,7 +51,6 @@ STATIC void xfs_unmountfs_wait(xfs_mount_t *); #ifdef HAVE_PERCPU_SB -STATIC void xfs_icsb_destroy_counters(xfs_mount_t *); STATIC void xfs_icsb_balance_counter(xfs_mount_t *, xfs_sb_field_t, int); STATIC void xfs_icsb_balance_counter_locked(xfs_mount_t *, xfs_sb_field_t, @@ -62,7 +61,6 @@ STATIC void xfs_icsb_disable_counter(xfs_mount_t *, xfs_sb_field_t); #else -#define xfs_icsb_destroy_counters(mp) do { } while (0) #define xfs_icsb_balance_counter(mp, a, b) do { } while (0) #define xfs_icsb_balance_counter_locked(mp, a, b) do { } while (0) #define xfs_icsb_modify_counters(mp, a, b, c) do { } while (0) @@ -124,34 +122,12 @@ static const struct { { sizeof(xfs_sb_t), 0 } }; -/* - * Return a pointer to an initialized xfs_mount structure. - */ -xfs_mount_t * -xfs_mount_init(void) -{ - xfs_mount_t *mp; - - mp = kmem_zalloc(sizeof(xfs_mount_t), KM_SLEEP); - - if (xfs_icsb_init_counters(mp)) { - mp->m_flags |= XFS_MOUNT_NO_PERCPU_SB; - } - - spin_lock_init(&mp->m_sb_lock); - mutex_init(&mp->m_ilock); - mutex_init(&mp->m_growlock); - atomic_set(&mp->m_active_trans, 0); - - return mp; -} - /* * Free up the resources associated with a mount structure. Assume that * the structure was initially zeroed, so we can tell which fields got * initialized. */ -void +STATIC void xfs_mount_free( xfs_mount_t *mp) { @@ -177,8 +153,6 @@ xfs_mount_free( kmem_free(mp->m_rtname); if (mp->m_logname != NULL) kmem_free(mp->m_logname); - - xfs_icsb_destroy_counters(mp); } /* @@ -2093,7 +2067,7 @@ xfs_icsb_reinit_counters( xfs_icsb_unlock(mp); } -STATIC void +void xfs_icsb_destroy_counters( xfs_mount_t *mp) { diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index 5acde7fd9c0..96d8791e9e5 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -210,12 +210,14 @@ typedef struct xfs_icsb_cnts { extern int xfs_icsb_init_counters(struct xfs_mount *); extern void xfs_icsb_reinit_counters(struct xfs_mount *); +extern void xfs_icsb_destroy_counters(struct xfs_mount *); extern void xfs_icsb_sync_counters(struct xfs_mount *, int); extern void xfs_icsb_sync_counters_locked(struct xfs_mount *, int); #else -#define xfs_icsb_init_counters(mp) (0) -#define xfs_icsb_reinit_counters(mp) do { } while (0) +#define xfs_icsb_init_counters(mp) (0) +#define xfs_icsb_destroy_counters(mp) do { } while (0) +#define xfs_icsb_reinit_counters(mp) do { } while (0) #define xfs_icsb_sync_counters(mp, flags) do { } while (0) #define xfs_icsb_sync_counters_locked(mp, flags) do { } while (0) #endif @@ -511,10 +513,8 @@ typedef struct xfs_mod_sb { #define XFS_MOUNT_ILOCK(mp) mutex_lock(&((mp)->m_ilock)) #define XFS_MOUNT_IUNLOCK(mp) mutex_unlock(&((mp)->m_ilock)) -extern xfs_mount_t *xfs_mount_init(void); extern void xfs_mod_sb(xfs_trans_t *, __int64_t); extern int xfs_log_sbcount(xfs_mount_t *, uint); -extern void xfs_mount_free(xfs_mount_t *mp); extern int xfs_mountfs(xfs_mount_t *mp, int); extern void xfs_mountfs_check_barriers(xfs_mount_t *mp); -- GitLab From 95db4e21b72603217f0bcafa4da9ee01fc1d2389 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 15:10:58 +1000 Subject: [PATCH 0134/1024] [XFS] kill calls to xfs_binval in the mount error path xfs_binval aka xfs_flush_buftarg is the first thing done in xfs_free_buftarg, so there is no need to have duplicated calls just before xfs_free_buftarg in the mount failure path. SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31197a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index fe52e9276aa..d2155b1de10 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1789,10 +1789,10 @@ xfs_fs_fill_super( */ error = xfs_start_flags(args, mp); if (error) - goto error1; + goto out_destroy_counters; error = xfs_readsb(mp, flags); if (error) - goto error1; + goto out_destroy_counters; error = xfs_finish_flags(args, mp); if (error) goto error2; @@ -1853,12 +1853,6 @@ xfs_fs_fill_super( error2: if (mp->m_sb_bp) xfs_freesb(mp); - error1: - xfs_binval(mp->m_ddev_targp); - if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) - xfs_binval(mp->m_logdev_targp); - if (mp->m_rtdev_targp) - xfs_binval(mp->m_rtdev_targp); out_destroy_counters: xfs_icsb_destroy_counters(mp); xfs_close_devices(mp); -- GitLab From effa2eda3ab9c013585349b8afd305dc5decf771 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 15:11:05 +1000 Subject: [PATCH 0135/1024] [XFS] rename error2 goto label in xfs_fs_fill_super SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31198a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index d2155b1de10..4c662d63d62 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1795,22 +1795,22 @@ xfs_fs_fill_super( goto out_destroy_counters; error = xfs_finish_flags(args, mp); if (error) - goto error2; + goto out_free_sb; error = xfs_setup_devices(mp); if (error) - goto error2; + goto out_free_sb; if (mp->m_flags & XFS_MOUNT_BARRIER) xfs_mountfs_check_barriers(mp); error = xfs_filestream_mount(mp); if (error) - goto error2; + goto out_free_sb; error = xfs_mountfs(mp, flags); if (error) - goto error2; + goto out_free_sb; XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, args->mtpt, args->fsname); @@ -1850,9 +1850,8 @@ xfs_fs_fill_super( kfree(args); return 0; - error2: - if (mp->m_sb_bp) - xfs_freesb(mp); + out_free_sb: + xfs_freesb(mp); out_destroy_counters: xfs_icsb_destroy_counters(mp); xfs_close_devices(mp); -- GitLab From 120226c11a6277d3e761393f0995c55218fabebb Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 20 May 2008 15:11:11 +1000 Subject: [PATCH 0136/1024] [XFS] add missing call to xfs_filestream_unmount on xfs_mountfs failure SGI-PV: 981951 SGI-Modid: xfs-linux-melb:xfs-kern:31199a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 4c662d63d62..41eea24a46e 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1810,7 +1810,7 @@ xfs_fs_fill_super( error = xfs_mountfs(mp, flags); if (error) - goto out_free_sb; + goto out_filestream_unmount; XFS_SEND_MOUNT(mp, DM_RIGHT_NULL, args->mtpt, args->fsname); @@ -1850,6 +1850,8 @@ xfs_fs_fill_super( kfree(args); return 0; + out_filestream_unmount: + xfs_filestream_unmount(mp); out_free_sb: xfs_freesb(mp); out_destroy_counters: -- GitLab From 68f34d5107dbace3d14a1c2f060fc8941894879c Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Tue, 20 May 2008 15:11:17 +1000 Subject: [PATCH 0137/1024] [XFS] de-duplicate calls to xfs_attr_trace_enter Every call to xfs_attr_trace_enter() shares the exact same 16 args in the middle... just send in the context pointer and let the next level down split it into the ktrace. Compile tested only. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:31200a Signed-off-by: Eric Sandeen Signed-off-by: Niv Sardi Signed-off-by: Josef 'Jeff' Sipek Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_attr.c | 106 ++++++++++--------------------------------- fs/xfs/xfs_attr_sf.h | 10 ++-- 2 files changed, 28 insertions(+), 88 deletions(-) diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index 86d8619f279..5e5dbe62b19 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -2300,23 +2300,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) void xfs_attr_trace_l_c(char *where, struct xfs_attr_list_context *context) { - xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_C, where, - (__psunsigned_t)context->dp, - (__psunsigned_t)context->cursor->hashval, - (__psunsigned_t)context->cursor->blkno, - (__psunsigned_t)context->cursor->offset, - (__psunsigned_t)context->alist, - (__psunsigned_t)context->bufsize, - (__psunsigned_t)context->count, - (__psunsigned_t)context->firstu, - (__psunsigned_t) - ((context->count > 0) && - !(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL))) - ? (ATTR_ENTRY(context->alist, - context->count-1)->a_valuelen) - : 0, - (__psunsigned_t)context->dupcnt, - (__psunsigned_t)context->flags, + xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_C, where, context, (__psunsigned_t)NULL, (__psunsigned_t)NULL, (__psunsigned_t)NULL); @@ -2329,23 +2313,7 @@ void xfs_attr_trace_l_cn(char *where, struct xfs_attr_list_context *context, struct xfs_da_intnode *node) { - xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CN, where, - (__psunsigned_t)context->dp, - (__psunsigned_t)context->cursor->hashval, - (__psunsigned_t)context->cursor->blkno, - (__psunsigned_t)context->cursor->offset, - (__psunsigned_t)context->alist, - (__psunsigned_t)context->bufsize, - (__psunsigned_t)context->count, - (__psunsigned_t)context->firstu, - (__psunsigned_t) - ((context->count > 0) && - !(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL))) - ? (ATTR_ENTRY(context->alist, - context->count-1)->a_valuelen) - : 0, - (__psunsigned_t)context->dupcnt, - (__psunsigned_t)context->flags, + xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CN, where, context, (__psunsigned_t)be16_to_cpu(node->hdr.count), (__psunsigned_t)be32_to_cpu(node->btree[0].hashval), (__psunsigned_t)be32_to_cpu(node->btree[ @@ -2359,23 +2327,7 @@ void xfs_attr_trace_l_cb(char *where, struct xfs_attr_list_context *context, struct xfs_da_node_entry *btree) { - xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CB, where, - (__psunsigned_t)context->dp, - (__psunsigned_t)context->cursor->hashval, - (__psunsigned_t)context->cursor->blkno, - (__psunsigned_t)context->cursor->offset, - (__psunsigned_t)context->alist, - (__psunsigned_t)context->bufsize, - (__psunsigned_t)context->count, - (__psunsigned_t)context->firstu, - (__psunsigned_t) - ((context->count > 0) && - !(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL))) - ? (ATTR_ENTRY(context->alist, - context->count-1)->a_valuelen) - : 0, - (__psunsigned_t)context->dupcnt, - (__psunsigned_t)context->flags, + xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CB, where, context, (__psunsigned_t)be32_to_cpu(btree->hashval), (__psunsigned_t)be32_to_cpu(btree->before), (__psunsigned_t)NULL); @@ -2388,23 +2340,7 @@ void xfs_attr_trace_l_cl(char *where, struct xfs_attr_list_context *context, struct xfs_attr_leafblock *leaf) { - xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CL, where, - (__psunsigned_t)context->dp, - (__psunsigned_t)context->cursor->hashval, - (__psunsigned_t)context->cursor->blkno, - (__psunsigned_t)context->cursor->offset, - (__psunsigned_t)context->alist, - (__psunsigned_t)context->bufsize, - (__psunsigned_t)context->count, - (__psunsigned_t)context->firstu, - (__psunsigned_t) - ((context->count > 0) && - !(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL))) - ? (ATTR_ENTRY(context->alist, - context->count-1)->a_valuelen) - : 0, - (__psunsigned_t)context->dupcnt, - (__psunsigned_t)context->flags, + xfs_attr_trace_enter(XFS_ATTR_KTRACE_L_CL, where, context, (__psunsigned_t)be16_to_cpu(leaf->hdr.count), (__psunsigned_t)be32_to_cpu(leaf->entries[0].hashval), (__psunsigned_t)be32_to_cpu(leaf->entries[ @@ -2417,22 +2353,30 @@ xfs_attr_trace_l_cl(char *where, struct xfs_attr_list_context *context, */ void xfs_attr_trace_enter(int type, char *where, - __psunsigned_t a2, __psunsigned_t a3, - __psunsigned_t a4, __psunsigned_t a5, - __psunsigned_t a6, __psunsigned_t a7, - __psunsigned_t a8, __psunsigned_t a9, - __psunsigned_t a10, __psunsigned_t a11, - __psunsigned_t a12, __psunsigned_t a13, - __psunsigned_t a14, __psunsigned_t a15) + struct xfs_attr_list_context *context, + __psunsigned_t a13, __psunsigned_t a14, + __psunsigned_t a15) { ASSERT(xfs_attr_trace_buf); ktrace_enter(xfs_attr_trace_buf, (void *)((__psunsigned_t)type), - (void *)where, - (void *)a2, (void *)a3, (void *)a4, - (void *)a5, (void *)a6, (void *)a7, - (void *)a8, (void *)a9, (void *)a10, - (void *)a11, (void *)a12, (void *)a13, - (void *)a14, (void *)a15); + (void *)((__psunsigned_t)where), + (void *)((__psunsigned_t)context->dp), + (void *)((__psunsigned_t)context->cursor->hashval), + (void *)((__psunsigned_t)context->cursor->blkno), + (void *)((__psunsigned_t)context->cursor->offset), + (void *)((__psunsigned_t)context->alist), + (void *)((__psunsigned_t)context->bufsize), + (void *)((__psunsigned_t)context->count), + (void *)((__psunsigned_t)context->firstu), + (void *)((__psunsigned_t) + (((context->count > 0) && + !(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL))) + ? (ATTR_ENTRY(context->alist, + context->count-1)->a_valuelen) + : 0)), + (void *)((__psunsigned_t)context->dupcnt), + (void *)((__psunsigned_t)context->flags), + (void *)a13, (void *)a14, (void *)a15); } #endif /* XFS_ATTR_TRACE */ diff --git a/fs/xfs/xfs_attr_sf.h b/fs/xfs/xfs_attr_sf.h index f67f917803b..ea22839caed 100644 --- a/fs/xfs/xfs_attr_sf.h +++ b/fs/xfs/xfs_attr_sf.h @@ -97,13 +97,9 @@ void xfs_attr_trace_l_cb(char *where, struct xfs_attr_list_context *context, void xfs_attr_trace_l_cl(char *where, struct xfs_attr_list_context *context, struct xfs_attr_leafblock *leaf); void xfs_attr_trace_enter(int type, char *where, - __psunsigned_t a2, __psunsigned_t a3, - __psunsigned_t a4, __psunsigned_t a5, - __psunsigned_t a6, __psunsigned_t a7, - __psunsigned_t a8, __psunsigned_t a9, - __psunsigned_t a10, __psunsigned_t a11, - __psunsigned_t a12, __psunsigned_t a13, - __psunsigned_t a14, __psunsigned_t a15); + struct xfs_attr_list_context *context, + __psunsigned_t a13, __psunsigned_t a14, + __psunsigned_t a15); #else #define xfs_attr_trace_l_c(w,c) #define xfs_attr_trace_l_cn(w,c,n) -- GitLab From 5163f95a08cbf058ae16452c2242c5600fedc32e Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Wed, 21 May 2008 16:41:01 +1000 Subject: [PATCH 0138/1024] [XFS] Name operation vector for hash and compare Adds two pieces of functionality for the basis of case-insensitive support in XFS: 1. A comparison result enumerated type: xfs_dacmp. It represents an exact match, case-insensitive match or no match at all. This patch only implements different and exact results. 2. xfs_nameops vector for specifying how to perform the hash generation of filenames and comparision methods. In this patch the hash vector points to the existing xfs_da_hashname function and the comparison method does a length compare, and if the same, does a memcmp and return the xfs_dacmp result. All filename functions that use the hash (create, lookup remove, rename, etc) now use the xfs_nameops.hashname function and all directory lookup functions also use the xfs_nameops.compname function. The lookup functions also handle case-insensitive results even though the default comparison function cannot return that. And important aspect of the lookup functions is that an exact match always has precedence over a case-insensitive. So while a case-insensitive match is found, we have to keep looking just in case there is an exact match. In the meantime, the info for the first case-insensitive match is retained if no exact match is found. SGI-PV: 981519 SGI-Modid: xfs-linux-melb:xfs-kern:31205a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_da_btree.c | 22 +++++++++++++++ fs/xfs/xfs_da_btree.h | 22 +++++++++++++++ fs/xfs/xfs_dir2.c | 12 ++++---- fs/xfs/xfs_dir2_block.c | 33 ++++++++++++++++------ fs/xfs/xfs_dir2_data.c | 5 +++- fs/xfs/xfs_dir2_leaf.c | 60 ++++++++++++++++++++++++++++----------- fs/xfs/xfs_dir2_node.c | 23 +++++++++------ fs/xfs/xfs_dir2_sf.c | 62 ++++++++++++++++++++++++----------------- fs/xfs/xfs_mount.h | 2 ++ 9 files changed, 174 insertions(+), 67 deletions(-) diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index 294780427ab..ae4b18c7726 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -1530,6 +1530,28 @@ xfs_da_hashname(const uchar_t *name, int namelen) } } +enum xfs_dacmp +xfs_da_compname( + struct xfs_da_args *args, + const char *name, + int len) +{ + return (args->namelen == len && memcmp(args->name, name, len) == 0) ? + XFS_CMP_EXACT : XFS_CMP_DIFFERENT; +} + +static xfs_dahash_t +xfs_default_hashname( + struct xfs_name *name) +{ + return xfs_da_hashname(name->name, name->len); +} + +const struct xfs_nameops xfs_default_nameops = { + .hashname = xfs_default_hashname, + .compname = xfs_da_compname +}; + /* * Add a block to the btree ahead of the file. * Return the new block number to the caller. diff --git a/fs/xfs/xfs_da_btree.h b/fs/xfs/xfs_da_btree.h index 7facf86f74f..e64c6924996 100644 --- a/fs/xfs/xfs_da_btree.h +++ b/fs/xfs/xfs_da_btree.h @@ -98,6 +98,15 @@ typedef struct xfs_da_node_entry xfs_da_node_entry_t; * Btree searching and modification structure definitions. *========================================================================*/ +/* + * Search comparison results + */ +enum xfs_dacmp { + XFS_CMP_DIFFERENT, /* names are completely different */ + XFS_CMP_EXACT, /* names are exactly the same */ + XFS_CMP_CASE /* names are same but differ in case */ +}; + /* * Structure to ease passing around component names. */ @@ -127,6 +136,7 @@ typedef struct xfs_da_args { unsigned char rename; /* T/F: this is an atomic rename op */ unsigned char addname; /* T/F: this is an add operation */ unsigned char oknoent; /* T/F: ok to return ENOENT, else die */ + enum xfs_dacmp cmpresult; /* name compare result for lookups */ } xfs_da_args_t; /* @@ -201,6 +211,14 @@ typedef struct xfs_da_state { (uint)(XFS_DA_LOGOFF(BASE, ADDR)), \ (uint)(XFS_DA_LOGOFF(BASE, ADDR)+(SIZE)-1) +/* + * Name ops for directory and/or attr name operations + */ +struct xfs_nameops { + xfs_dahash_t (*hashname)(struct xfs_name *); + enum xfs_dacmp (*compname)(struct xfs_da_args *, const char *, int); +}; + #ifdef __KERNEL__ /*======================================================================== @@ -249,6 +267,10 @@ int xfs_da_shrink_inode(xfs_da_args_t *args, xfs_dablk_t dead_blkno, xfs_dabuf_t *dead_buf); uint xfs_da_hashname(const uchar_t *name_string, int name_length); +enum xfs_dacmp xfs_da_compname(struct xfs_da_args *args, + const char *name, int len); + + xfs_da_state_t *xfs_da_state_alloc(void); void xfs_da_state_free(xfs_da_state_t *state); diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index 0284af1734b..675899bb704 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -65,6 +65,7 @@ xfs_dir_mount( (mp->m_dirblksize - (uint)sizeof(xfs_da_node_hdr_t)) / (uint)sizeof(xfs_da_node_entry_t); mp->m_dir_magicpct = (mp->m_dirblksize * 37) / 100; + mp->m_dirnameops = &xfs_default_nameops; } /* @@ -164,7 +165,7 @@ xfs_dir_createname( args.name = name->name; args.namelen = name->len; - args.hashval = xfs_da_hashname(name->name, name->len); + args.hashval = dp->i_mount->m_dirnameops->hashname(name); args.inumber = inum; args.dp = dp; args.firstblock = first; @@ -210,11 +211,12 @@ xfs_dir_lookup( args.name = name->name; args.namelen = name->len; - args.hashval = xfs_da_hashname(name->name, name->len); + args.hashval = dp->i_mount->m_dirnameops->hashname(name); args.dp = dp; args.whichfork = XFS_DATA_FORK; args.trans = tp; args.oknoent = 1; + args.cmpresult = XFS_CMP_DIFFERENT; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_lookup(&args); @@ -257,7 +259,7 @@ xfs_dir_removename( args.name = name->name; args.namelen = name->len; - args.hashval = xfs_da_hashname(name->name, name->len); + args.hashval = dp->i_mount->m_dirnameops->hashname(name); args.inumber = ino; args.dp = dp; args.firstblock = first; @@ -340,7 +342,7 @@ xfs_dir_replace( args.name = name->name; args.namelen = name->len; - args.hashval = xfs_da_hashname(name->name, name->len); + args.hashval = dp->i_mount->m_dirnameops->hashname(name); args.inumber = inum; args.dp = dp; args.firstblock = first; @@ -388,7 +390,7 @@ xfs_dir_canenter( args.name = name->name; args.namelen = name->len; - args.hashval = xfs_da_hashname(name->name, name->len); + args.hashval = dp->i_mount->m_dirnameops->hashname(name); args.dp = dp; args.whichfork = XFS_DATA_FORK; args.trans = tp; diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c index e8a7aca5fe2..98588491cb0 100644 --- a/fs/xfs/xfs_dir2_block.c +++ b/fs/xfs/xfs_dir2_block.c @@ -643,6 +643,7 @@ xfs_dir2_block_lookup_int( int mid; /* binary search current idx */ xfs_mount_t *mp; /* filesystem mount point */ xfs_trans_t *tp; /* transaction pointer */ + enum xfs_dacmp cmp; /* comparison result */ dp = args->dp; tp = args->trans; @@ -697,20 +698,31 @@ xfs_dir2_block_lookup_int( dep = (xfs_dir2_data_entry_t *) ((char *)block + xfs_dir2_dataptr_to_off(mp, addr)); /* - * Compare, if it's right give back buffer & entry number. + * Compare name and if it's an exact match, return the index + * and buffer. If it's the first case-insensitive match, store + * the index and buffer and continue looking for an exact match. */ - if (dep->namelen == args->namelen && - dep->name[0] == args->name[0] && - memcmp(dep->name, args->name, args->namelen) == 0) { + cmp = mp->m_dirnameops->compname(args, dep->name, dep->namelen); + if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) { + args->cmpresult = cmp; *bpp = bp; *entno = mid; - return 0; + if (cmp == XFS_CMP_EXACT) + return 0; } - } while (++mid < be32_to_cpu(btp->count) && be32_to_cpu(blp[mid].hashval) == hash); + } while (++mid < be32_to_cpu(btp->count) && + be32_to_cpu(blp[mid].hashval) == hash); + + ASSERT(args->oknoent); + /* + * Here, we can only be doing a lookup (not a rename or replace). + * If a case-insensitive match was found earlier, return success. + */ + if (args->cmpresult == XFS_CMP_CASE) + return 0; /* * No match, release the buffer and return ENOENT. */ - ASSERT(args->oknoent); xfs_da_brelse(tp, bp); return XFS_ERROR(ENOENT); } @@ -1033,6 +1045,7 @@ xfs_dir2_sf_to_block( xfs_dir2_sf_t *sfp; /* shortform structure */ __be16 *tagp; /* end of data entry */ xfs_trans_t *tp; /* transaction pointer */ + struct xfs_name name; xfs_dir2_trace_args("sf_to_block", args); dp = args->dp; @@ -1187,8 +1200,10 @@ xfs_dir2_sf_to_block( tagp = xfs_dir2_data_entry_tag_p(dep); *tagp = cpu_to_be16((char *)dep - (char *)block); xfs_dir2_data_log_entry(tp, bp, dep); - blp[2 + i].hashval = cpu_to_be32(xfs_da_hashname( - (char *)sfep->name, sfep->namelen)); + name.name = sfep->name; + name.len = sfep->namelen; + blp[2 + i].hashval = cpu_to_be32(mp->m_dirnameops-> + hashname(&name)); blp[2 + i].address = cpu_to_be32(xfs_dir2_byte_to_dataptr(mp, (char *)dep - (char *)block)); offset = (int)((char *)(tagp + 1) - (char *)block); diff --git a/fs/xfs/xfs_dir2_data.c b/fs/xfs/xfs_dir2_data.c index fb8c9e08b23..498f8d69433 100644 --- a/fs/xfs/xfs_dir2_data.c +++ b/fs/xfs/xfs_dir2_data.c @@ -65,6 +65,7 @@ xfs_dir2_data_check( xfs_mount_t *mp; /* filesystem mount point */ char *p; /* current data position */ int stale; /* count of stale leaves */ + struct xfs_name name; mp = dp->i_mount; d = bp->data; @@ -140,7 +141,9 @@ xfs_dir2_data_check( addr = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk, (xfs_dir2_data_aoff_t) ((char *)dep - (char *)d)); - hash = xfs_da_hashname((char *)dep->name, dep->namelen); + name.name = dep->name; + name.len = dep->namelen; + hash = mp->m_dirnameops->hashname(&name); for (i = 0; i < be32_to_cpu(btp->count); i++) { if (be32_to_cpu(lep[i].address) == addr && be32_to_cpu(lep[i].hashval) == hash) diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index e33433408e4..b52903bc0b1 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -1331,6 +1331,8 @@ xfs_dir2_leaf_lookup_int( xfs_mount_t *mp; /* filesystem mount point */ xfs_dir2_db_t newdb; /* new data block number */ xfs_trans_t *tp; /* transaction pointer */ + xfs_dabuf_t *cbp; /* case match data buffer */ + enum xfs_dacmp cmp; /* name compare result */ dp = args->dp; tp = args->trans; @@ -1354,9 +1356,11 @@ xfs_dir2_leaf_lookup_int( * Loop over all the entries with the right hash value * looking to match the name. */ + cbp = NULL; for (lep = &leaf->ents[index], dbp = NULL, curdb = -1; - index < be16_to_cpu(leaf->hdr.count) && be32_to_cpu(lep->hashval) == args->hashval; - lep++, index++) { + index < be16_to_cpu(leaf->hdr.count) && + be32_to_cpu(lep->hashval) == args->hashval; + lep++, index++) { /* * Skip over stale leaf entries. */ @@ -1371,12 +1375,12 @@ xfs_dir2_leaf_lookup_int( * need to pitch the old one and read the new one. */ if (newdb != curdb) { - if (dbp) + if (dbp != cbp) xfs_da_brelse(tp, dbp); - if ((error = - xfs_da_read_buf(tp, dp, - xfs_dir2_db_to_da(mp, newdb), -1, &dbp, - XFS_DATA_FORK))) { + error = xfs_da_read_buf(tp, dp, + xfs_dir2_db_to_da(mp, newdb), + -1, &dbp, XFS_DATA_FORK); + if (error) { xfs_da_brelse(tp, lbp); return error; } @@ -1386,24 +1390,46 @@ xfs_dir2_leaf_lookup_int( /* * Point to the data entry. */ - dep = (xfs_dir2_data_entry_t *) - ((char *)dbp->data + - xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address))); + dep = (xfs_dir2_data_entry_t *)((char *)dbp->data + + xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address))); /* - * If it matches then return it. + * Compare name and if it's an exact match, return the index + * and buffer. If it's the first case-insensitive match, store + * the index and buffer and continue looking for an exact match. */ - if (dep->namelen == args->namelen && - dep->name[0] == args->name[0] && - memcmp(dep->name, args->name, args->namelen) == 0) { - *dbpp = dbp; + cmp = mp->m_dirnameops->compname(args, dep->name, dep->namelen); + if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) { + args->cmpresult = cmp; *indexp = index; - return 0; + /* + * case exact match: release the stored CI buffer if it + * exists and return the current buffer. + */ + if (cmp == XFS_CMP_EXACT) { + if (cbp && cbp != dbp) + xfs_da_brelse(tp, cbp); + *dbpp = dbp; + return 0; + } + cbp = dbp; } } + ASSERT(args->oknoent); + /* + * Here, we can only be doing a lookup (not a rename or replace). + * If a case-insensitive match was found earlier, release the current + * buffer and return the stored CI matching buffer. + */ + if (args->cmpresult == XFS_CMP_CASE) { + if (cbp != dbp) + xfs_da_brelse(tp, dbp); + *dbpp = cbp; + return 0; + } /* * No match found, return ENOENT. */ - ASSERT(args->oknoent); + ASSERT(cbp == NULL); if (dbp) xfs_da_brelse(tp, dbp); xfs_da_brelse(tp, lbp); diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c index e29b7c63e19..fedf8f976a1 100644 --- a/fs/xfs/xfs_dir2_node.c +++ b/fs/xfs/xfs_dir2_node.c @@ -556,6 +556,7 @@ xfs_dir2_leafn_lookup_for_entry( xfs_mount_t *mp; /* filesystem mount point */ xfs_dir2_db_t newdb; /* new data block number */ xfs_trans_t *tp; /* transaction pointer */ + enum xfs_dacmp cmp; /* comparison result */ dp = args->dp; tp = args->trans; @@ -620,17 +621,21 @@ xfs_dir2_leafn_lookup_for_entry( dep = (xfs_dir2_data_entry_t *)((char *)curbp->data + xfs_dir2_dataptr_to_off(mp, be32_to_cpu(lep->address))); /* - * Compare the entry, return it if it matches. + * Compare the entry and if it's an exact match, return + * EEXIST immediately. If it's the first case-insensitive + * match, store the inode number and continue looking. */ - if (dep->namelen == args->namelen && memcmp(dep->name, - args->name, args->namelen) == 0) { + cmp = mp->m_dirnameops->compname(args, dep->name, dep->namelen); + if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) { + args->cmpresult = cmp; args->inumber = be64_to_cpu(dep->inumber); di = (int)((char *)dep - (char *)curbp->data); error = EEXIST; - goto out; + if (cmp == XFS_CMP_EXACT) + goto out; } } - /* Didn't find a match. */ + /* Didn't find an exact match. */ error = ENOENT; di = -1; ASSERT(index == be16_to_cpu(leaf->hdr.count) || args->oknoent); @@ -1813,6 +1818,8 @@ xfs_dir2_node_lookup( error = xfs_da_node_lookup_int(state, &rval); if (error) rval = error; + else if (rval == ENOENT && args->cmpresult == XFS_CMP_CASE) + rval = EEXIST; /* a case-insensitive match was found */ /* * Release the btree blocks and leaf block. */ @@ -1856,9 +1863,8 @@ xfs_dir2_node_removename( * Look up the entry we're deleting, set up the cursor. */ error = xfs_da_node_lookup_int(state, &rval); - if (error) { + if (error) rval = error; - } /* * Didn't find it, upper layer screwed up. */ @@ -1875,9 +1881,8 @@ xfs_dir2_node_removename( */ error = xfs_dir2_leafn_remove(args, blk->bp, blk->index, &state->extrablk, &rval); - if (error) { + if (error) return error; - } /* * Fix the hash values up the btree. */ diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c index ca33bc62edc..dcd09cada43 100644 --- a/fs/xfs/xfs_dir2_sf.c +++ b/fs/xfs/xfs_dir2_sf.c @@ -814,6 +814,7 @@ xfs_dir2_sf_lookup( int i; /* entry index */ xfs_dir2_sf_entry_t *sfep; /* shortform directory entry */ xfs_dir2_sf_t *sfp; /* shortform structure */ + enum xfs_dacmp cmp; /* comparison result */ xfs_dir2_trace_args("sf_lookup", args); xfs_dir2_sf_check(args); @@ -836,6 +837,7 @@ xfs_dir2_sf_lookup( */ if (args->namelen == 1 && args->name[0] == '.') { args->inumber = dp->i_ino; + args->cmpresult = XFS_CMP_EXACT; return XFS_ERROR(EEXIST); } /* @@ -844,27 +846,39 @@ xfs_dir2_sf_lookup( if (args->namelen == 2 && args->name[0] == '.' && args->name[1] == '.') { args->inumber = xfs_dir2_sf_get_inumber(sfp, &sfp->hdr.parent); + args->cmpresult = XFS_CMP_EXACT; return XFS_ERROR(EEXIST); } /* * Loop over all the entries trying to match ours. */ - for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); - i < sfp->hdr.count; - i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) { - if (sfep->namelen == args->namelen && - sfep->name[0] == args->name[0] && - memcmp(args->name, sfep->name, args->namelen) == 0) { - args->inumber = - xfs_dir2_sf_get_inumber(sfp, - xfs_dir2_sf_inumberp(sfep)); - return XFS_ERROR(EEXIST); + for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->hdr.count; + i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) { + /* + * Compare name and if it's an exact match, return the inode + * number. If it's the first case-insensitive match, store the + * inode number and continue looking for an exact match. + */ + cmp = dp->i_mount->m_dirnameops->compname(args, sfep->name, + sfep->namelen); + if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) { + args->cmpresult = cmp; + args->inumber = xfs_dir2_sf_get_inumber(sfp, + xfs_dir2_sf_inumberp(sfep)); + if (cmp == XFS_CMP_EXACT) + return XFS_ERROR(EEXIST); } } + ASSERT(args->oknoent); + /* + * Here, we can only be doing a lookup (not a rename or replace). + * If a case-insensitive match was found earlier, return "found". + */ + if (args->cmpresult == XFS_CMP_CASE) + return XFS_ERROR(EEXIST); /* * Didn't find it. */ - ASSERT(args->oknoent); return XFS_ERROR(ENOENT); } @@ -904,24 +918,21 @@ xfs_dir2_sf_removename( * Loop over the old directory entries. * Find the one we're deleting. */ - for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); - i < sfp->hdr.count; - i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) { - if (sfep->namelen == args->namelen && - sfep->name[0] == args->name[0] && - memcmp(sfep->name, args->name, args->namelen) == 0) { + for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->hdr.count; + i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) { + if (xfs_da_compname(args, sfep->name, sfep->namelen) == + XFS_CMP_EXACT) { ASSERT(xfs_dir2_sf_get_inumber(sfp, - xfs_dir2_sf_inumberp(sfep)) == - args->inumber); + xfs_dir2_sf_inumberp(sfep)) == + args->inumber); break; } } /* * Didn't find it. */ - if (i == sfp->hdr.count) { + if (i == sfp->hdr.count) return XFS_ERROR(ENOENT); - } /* * Calculate sizes. */ @@ -1042,11 +1053,10 @@ xfs_dir2_sf_replace( */ else { for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); - i < sfp->hdr.count; - i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) { - if (sfep->namelen == args->namelen && - sfep->name[0] == args->name[0] && - memcmp(args->name, sfep->name, args->namelen) == 0) { + i < sfp->hdr.count; + i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) { + if (xfs_da_compname(args, sfep->name, sfep->namelen) == + XFS_CMP_EXACT) { #if XFS_BIG_INUMS || defined(DEBUG) ino = xfs_dir2_sf_get_inumber(sfp, xfs_dir2_sf_inumberp(sfep)); diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index 96d8791e9e5..2a75f1703b3 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -61,6 +61,7 @@ struct xfs_bmap_free; struct xfs_extdelta; struct xfs_swapext; struct xfs_mru_cache; +struct xfs_nameops; /* * Prototypes and functions for the Data Migration subsystem. @@ -315,6 +316,7 @@ typedef struct xfs_mount { __uint8_t m_inode_quiesce;/* call quiesce on new inodes. field governed by m_ilock */ __uint8_t m_sectbb_log; /* sectlog - BBSHIFT */ + const struct xfs_nameops *m_dirnameops; /* vector of dir name ops */ int m_dirblksize; /* directory block sz--bytes */ int m_dirblkfsbs; /* directory block sz--fsbs */ xfs_dablk_t m_dirdatablk; /* blockno of dir data v2 */ -- GitLab From 6a178100abf01282eb697ab62b6086b2886dfc00 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Wed, 21 May 2008 16:42:05 +1000 Subject: [PATCH 0139/1024] [XFS] Add op_flags field and helpers to xfs_da_args The end of the xfs_da_args structure has 4 unsigned char fields for true/false information on directory and attr operations using the xfs_da_args structure. The following converts these 4 into a op_flags field that uses the first 4 bits for these fields and allows expansion for future operation information (eg. case-insensitive lookup request). SGI-PV: 981520 SGI-Modid: xfs-linux-melb:xfs-kern:31206a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_attr.c | 11 +++++------ fs/xfs/xfs_attr_leaf.c | 20 +++++++++++--------- fs/xfs/xfs_da_btree.c | 2 +- fs/xfs/xfs_da_btree.h | 13 +++++++++---- fs/xfs/xfs_dir2.c | 14 ++++++++------ fs/xfs/xfs_dir2_block.c | 10 +++++----- fs/xfs/xfs_dir2_leaf.c | 15 ++++++++------- fs/xfs/xfs_dir2_node.c | 16 +++++++++------- fs/xfs/xfs_dir2_sf.c | 8 ++++---- fs/xfs/xfs_dir2_trace.c | 20 +++++++++++--------- 10 files changed, 71 insertions(+), 58 deletions(-) diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index 5e5dbe62b19..557dad611de 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -241,8 +241,7 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name, args.firstblock = &firstblock; args.flist = &flist; args.whichfork = XFS_ATTR_FORK; - args.addname = 1; - args.oknoent = 1; + args.op_flags = XFS_DA_OP_ADDNAME | XFS_DA_OP_OKNOENT; /* * Determine space new attribute will use, and if it would be @@ -974,7 +973,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args) xfs_da_brelse(args->trans, bp); return(retval); } - args->rename = 1; /* an atomic rename */ + args->op_flags |= XFS_DA_OP_RENAME; /* an atomic rename */ args->blkno2 = args->blkno; /* set 2nd entry info*/ args->index2 = args->index; args->rmtblkno2 = args->rmtblkno; @@ -1054,7 +1053,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args) * so that one disappears and one appears atomically. Then we * must remove the "old" attribute/value pair. */ - if (args->rename) { + if (args->op_flags & XFS_DA_OP_RENAME) { /* * In a separate transaction, set the incomplete flag on the * "old" attr and clear the incomplete flag on the "new" attr. @@ -1307,7 +1306,7 @@ restart: } else if (retval == EEXIST) { if (args->flags & ATTR_CREATE) goto out; - args->rename = 1; /* atomic rename op */ + args->op_flags |= XFS_DA_OP_RENAME; /* atomic rename op */ args->blkno2 = args->blkno; /* set 2nd entry info*/ args->index2 = args->index; args->rmtblkno2 = args->rmtblkno; @@ -1425,7 +1424,7 @@ restart: * so that one disappears and one appears atomically. Then we * must remove the "old" attribute/value pair. */ - if (args->rename) { + if (args->op_flags & XFS_DA_OP_RENAME) { /* * In a separate transaction, set the incomplete flag on the * "old" attr and clear the incomplete flag on the "new" attr. diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index a85e9caf015..cb345e6e485 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -369,9 +369,10 @@ xfs_attr_shortform_remove(xfs_da_args_t *args) * Fix up the start offset of the attribute fork */ totsize -= size; - if (totsize == sizeof(xfs_attr_sf_hdr_t) && !args->addname && - (mp->m_flags & XFS_MOUNT_ATTR2) && - (dp->i_d.di_format != XFS_DINODE_FMT_BTREE)) { + if (totsize == sizeof(xfs_attr_sf_hdr_t) && + !(args->op_flags & XFS_DA_OP_ADDNAME) && + (mp->m_flags & XFS_MOUNT_ATTR2) && + (dp->i_d.di_format != XFS_DINODE_FMT_BTREE)) { /* * Last attribute now removed, revert to original * inode format making all literal area available @@ -389,9 +390,10 @@ xfs_attr_shortform_remove(xfs_da_args_t *args) xfs_idata_realloc(dp, -size, XFS_ATTR_FORK); dp->i_d.di_forkoff = xfs_attr_shortform_bytesfit(dp, totsize); ASSERT(dp->i_d.di_forkoff); - ASSERT(totsize > sizeof(xfs_attr_sf_hdr_t) || args->addname || - !(mp->m_flags & XFS_MOUNT_ATTR2) || - dp->i_d.di_format == XFS_DINODE_FMT_BTREE); + ASSERT(totsize > sizeof(xfs_attr_sf_hdr_t) || + (args->op_flags & XFS_DA_OP_ADDNAME) || + !(mp->m_flags & XFS_MOUNT_ATTR2) || + dp->i_d.di_format == XFS_DINODE_FMT_BTREE); dp->i_afp->if_ext_max = XFS_IFORK_ASIZE(dp) / (uint)sizeof(xfs_bmbt_rec_t); dp->i_df.if_ext_max = @@ -531,7 +533,7 @@ xfs_attr_shortform_to_leaf(xfs_da_args_t *args) nargs.total = args->total; nargs.whichfork = XFS_ATTR_FORK; nargs.trans = args->trans; - nargs.oknoent = 1; + nargs.op_flags = XFS_DA_OP_OKNOENT; sfe = &sf->list[0]; for (i = 0; i < sf->hdr.count; i++) { @@ -853,7 +855,7 @@ xfs_attr_leaf_to_shortform(xfs_dabuf_t *bp, xfs_da_args_t *args, int forkoff) nargs.total = args->total; nargs.whichfork = XFS_ATTR_FORK; nargs.trans = args->trans; - nargs.oknoent = 1; + nargs.op_flags = XFS_DA_OP_OKNOENT; entry = &leaf->entries[0]; for (i = 0; i < be16_to_cpu(leaf->hdr.count); entry++, i++) { if (entry->flags & XFS_ATTR_INCOMPLETE) @@ -1155,7 +1157,7 @@ xfs_attr_leaf_add_work(xfs_dabuf_t *bp, xfs_da_args_t *args, int mapindex) entry->hashval = cpu_to_be32(args->hashval); entry->flags = tmp ? XFS_ATTR_LOCAL : 0; entry->flags |= XFS_ATTR_NSP_ARGS_TO_ONDISK(args->flags); - if (args->rename) { + if (args->op_flags & XFS_DA_OP_RENAME) { entry->flags |= XFS_ATTR_INCOMPLETE; if ((args->blkno2 == args->blkno) && (args->index2 <= args->index)) { diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index ae4b18c7726..edc0aef4e51 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -1431,7 +1431,7 @@ xfs_da_path_shift(xfs_da_state_t *state, xfs_da_state_path_t *path, } if (level < 0) { *result = XFS_ERROR(ENOENT); /* we're out of our tree */ - ASSERT(args->oknoent); + ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); return(0); } diff --git a/fs/xfs/xfs_da_btree.h b/fs/xfs/xfs_da_btree.h index e64c6924996..8face64c11f 100644 --- a/fs/xfs/xfs_da_btree.h +++ b/fs/xfs/xfs_da_btree.h @@ -132,13 +132,18 @@ typedef struct xfs_da_args { int index2; /* index of 2nd attr in blk */ xfs_dablk_t rmtblkno2; /* remote attr value starting blkno */ int rmtblkcnt2; /* remote attr value block count */ - unsigned char justcheck; /* T/F: check for ok with no space */ - unsigned char rename; /* T/F: this is an atomic rename op */ - unsigned char addname; /* T/F: this is an add operation */ - unsigned char oknoent; /* T/F: ok to return ENOENT, else die */ + int op_flags; /* operation flags */ enum xfs_dacmp cmpresult; /* name compare result for lookups */ } xfs_da_args_t; +/* + * Operation flags: + */ +#define XFS_DA_OP_JUSTCHECK 0x0001 /* check for ok with no space */ +#define XFS_DA_OP_RENAME 0x0002 /* this is an atomic rename op */ +#define XFS_DA_OP_ADDNAME 0x0004 /* this is an add operation */ +#define XFS_DA_OP_OKNOENT 0x0008 /* lookup/add op, ENOENT ok, else die */ + /* * Structure to describe buffer(s) for a block. * This is needed in the directory version 2 format case, when diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index 675899bb704..3387acd3e47 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -46,6 +46,8 @@ struct xfs_name xfs_name_dotdot = {"..", 2}; +extern const struct xfs_nameops xfs_default_nameops; + void xfs_dir_mount( xfs_mount_t *mp) @@ -173,8 +175,7 @@ xfs_dir_createname( args.total = total; args.whichfork = XFS_DATA_FORK; args.trans = tp; - args.justcheck = 0; - args.addname = args.oknoent = 1; + args.op_flags = XFS_DA_OP_ADDNAME | XFS_DA_OP_OKNOENT; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_addname(&args); @@ -215,7 +216,7 @@ xfs_dir_lookup( args.dp = dp; args.whichfork = XFS_DATA_FORK; args.trans = tp; - args.oknoent = 1; + args.op_flags = XFS_DA_OP_OKNOENT; args.cmpresult = XFS_CMP_DIFFERENT; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) @@ -267,7 +268,7 @@ xfs_dir_removename( args.total = total; args.whichfork = XFS_DATA_FORK; args.trans = tp; - args.justcheck = args.addname = args.oknoent = 0; + args.op_flags = 0; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_removename(&args); @@ -350,7 +351,7 @@ xfs_dir_replace( args.total = total; args.whichfork = XFS_DATA_FORK; args.trans = tp; - args.justcheck = args.addname = args.oknoent = 0; + args.op_flags = 0; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_replace(&args); @@ -394,7 +395,8 @@ xfs_dir_canenter( args.dp = dp; args.whichfork = XFS_DATA_FORK; args.trans = tp; - args.justcheck = args.addname = args.oknoent = 1; + args.op_flags = XFS_DA_OP_JUSTCHECK | XFS_DA_OP_ADDNAME | + XFS_DA_OP_OKNOENT; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_addname(&args); diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c index 98588491cb0..dee225918db 100644 --- a/fs/xfs/xfs_dir2_block.c +++ b/fs/xfs/xfs_dir2_block.c @@ -215,7 +215,7 @@ xfs_dir2_block_addname( /* * If this isn't a real add, we're done with the buffer. */ - if (args->justcheck) + if (args->op_flags & XFS_DA_OP_JUSTCHECK) xfs_da_brelse(tp, bp); /* * If we don't have space for the new entry & leaf ... @@ -225,7 +225,7 @@ xfs_dir2_block_addname( * Not trying to actually do anything, or don't have * a space reservation: return no-space. */ - if (args->justcheck || args->total == 0) + if ((args->op_flags & XFS_DA_OP_JUSTCHECK) || args->total == 0) return XFS_ERROR(ENOSPC); /* * Convert to the next larger format. @@ -240,7 +240,7 @@ xfs_dir2_block_addname( /* * Just checking, and it would work, so say so. */ - if (args->justcheck) + if (args->op_flags & XFS_DA_OP_JUSTCHECK) return 0; needlog = needscan = 0; /* @@ -674,7 +674,7 @@ xfs_dir2_block_lookup_int( else high = mid - 1; if (low > high) { - ASSERT(args->oknoent); + ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); xfs_da_brelse(tp, bp); return XFS_ERROR(ENOENT); } @@ -713,7 +713,7 @@ xfs_dir2_block_lookup_int( } while (++mid < be32_to_cpu(btp->count) && be32_to_cpu(blp[mid].hashval) == hash); - ASSERT(args->oknoent); + ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); /* * Here, we can only be doing a lookup (not a rename or replace). * If a case-insensitive match was found earlier, return success. diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index b52903bc0b1..2ebbed4f1b0 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -263,20 +263,21 @@ xfs_dir2_leaf_addname( * If we don't have enough free bytes but we can make enough * by compacting out stale entries, we'll do that. */ - if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu(leaf->hdr.count)] < needbytes && - be16_to_cpu(leaf->hdr.stale) > 1) { + if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu(leaf->hdr.count)] < + needbytes && be16_to_cpu(leaf->hdr.stale) > 1) { compact = 1; } /* * Otherwise if we don't have enough free bytes we need to * convert to node form. */ - else if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu(leaf->hdr.count)] < - needbytes) { + else if ((char *)bestsp - (char *)&leaf->ents[be16_to_cpu( + leaf->hdr.count)] < needbytes) { /* * Just checking or no space reservation, give up. */ - if (args->justcheck || args->total == 0) { + if ((args->op_flags & XFS_DA_OP_JUSTCHECK) || + args->total == 0) { xfs_da_brelse(tp, lbp); return XFS_ERROR(ENOSPC); } @@ -301,7 +302,7 @@ xfs_dir2_leaf_addname( * If just checking, then it will fit unless we needed to allocate * a new data block. */ - if (args->justcheck) { + if (args->op_flags & XFS_DA_OP_JUSTCHECK) { xfs_da_brelse(tp, lbp); return use_block == -1 ? XFS_ERROR(ENOSPC) : 0; } @@ -1414,7 +1415,7 @@ xfs_dir2_leaf_lookup_int( cbp = dbp; } } - ASSERT(args->oknoent); + ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); /* * Here, we can only be doing a lookup (not a rename or replace). * If a case-insensitive match was found earlier, release the current diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c index fedf8f976a1..c71cff85950 100644 --- a/fs/xfs/xfs_dir2_node.c +++ b/fs/xfs/xfs_dir2_node.c @@ -226,7 +226,7 @@ xfs_dir2_leafn_add( ASSERT(index == be16_to_cpu(leaf->hdr.count) || be32_to_cpu(leaf->ents[index].hashval) >= args->hashval); - if (args->justcheck) + if (args->op_flags & XFS_DA_OP_JUSTCHECK) return 0; /* @@ -515,7 +515,7 @@ xfs_dir2_leafn_lookup_for_addname( /* Didn't find any space */ fi = -1; out: - ASSERT(args->oknoent); + ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); if (curbp) { /* Giving back a free block. */ state->extravalid = 1; @@ -638,7 +638,8 @@ xfs_dir2_leafn_lookup_for_entry( /* Didn't find an exact match. */ error = ENOENT; di = -1; - ASSERT(index == be16_to_cpu(leaf->hdr.count) || args->oknoent); + ASSERT(index == be16_to_cpu(leaf->hdr.count) || + (args->op_flags & XFS_DA_OP_OKNOENT)); out: if (curbp) { /* Giving back a data block. */ @@ -669,7 +670,7 @@ xfs_dir2_leafn_lookup_int( int *indexp, /* out: leaf entry index */ xfs_da_state_t *state) /* state to fill in */ { - if (args->addname) + if (args->op_flags & XFS_DA_OP_ADDNAME) return xfs_dir2_leafn_lookup_for_addname(bp, args, indexp, state); return xfs_dir2_leafn_lookup_for_entry(bp, args, indexp, state); @@ -1383,7 +1384,7 @@ xfs_dir2_node_addname( /* * It worked, fix the hash values up the btree. */ - if (!args->justcheck) + if (!(args->op_flags & XFS_DA_OP_JUSTCHECK)) xfs_da_fixhashpath(state, &state->path); } else { /* @@ -1566,7 +1567,8 @@ xfs_dir2_node_addname_int( /* * Not allowed to allocate, return failure. */ - if (args->justcheck || args->total == 0) { + if ((args->op_flags & XFS_DA_OP_JUSTCHECK) || + args->total == 0) { /* * Drop the freespace buffer unless it came from our * caller. @@ -1712,7 +1714,7 @@ xfs_dir2_node_addname_int( /* * If just checking, we succeeded. */ - if (args->justcheck) { + if (args->op_flags & XFS_DA_OP_JUSTCHECK) { if ((fblk == NULL || fblk->bp == NULL) && fbp != NULL) xfs_da_buf_done(fbp); return 0; diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c index dcd09cada43..9409fd3e565 100644 --- a/fs/xfs/xfs_dir2_sf.c +++ b/fs/xfs/xfs_dir2_sf.c @@ -332,7 +332,7 @@ xfs_dir2_sf_addname( /* * Just checking or no space reservation, it doesn't fit. */ - if (args->justcheck || args->total == 0) + if ((args->op_flags & XFS_DA_OP_JUSTCHECK) || args->total == 0) return XFS_ERROR(ENOSPC); /* * Convert to block form then add the name. @@ -345,7 +345,7 @@ xfs_dir2_sf_addname( /* * Just checking, it fits. */ - if (args->justcheck) + if (args->op_flags & XFS_DA_OP_JUSTCHECK) return 0; /* * Do it the easy way - just add it at the end. @@ -869,7 +869,7 @@ xfs_dir2_sf_lookup( return XFS_ERROR(EEXIST); } } - ASSERT(args->oknoent); + ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); /* * Here, we can only be doing a lookup (not a rename or replace). * If a case-insensitive match was found earlier, return "found". @@ -1071,7 +1071,7 @@ xfs_dir2_sf_replace( * Didn't find it. */ if (i == sfp->hdr.count) { - ASSERT(args->oknoent); + ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); #if XFS_BIG_INUMS if (i8elevated) xfs_dir2_sf_toino4(args); diff --git a/fs/xfs/xfs_dir2_trace.c b/fs/xfs/xfs_dir2_trace.c index f3fb2ffd6f5..6cc7c0c681a 100644 --- a/fs/xfs/xfs_dir2_trace.c +++ b/fs/xfs/xfs_dir2_trace.c @@ -85,7 +85,8 @@ xfs_dir2_trace_args( (void *)((unsigned long)(args->inumber >> 32)), (void *)((unsigned long)(args->inumber & 0xFFFFFFFF)), (void *)args->dp, (void *)args->trans, - (void *)(unsigned long)args->justcheck, NULL, NULL); + (void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK), + NULL, NULL); } void @@ -100,7 +101,7 @@ xfs_dir2_trace_args_b( (void *)((unsigned long)(args->inumber >> 32)), (void *)((unsigned long)(args->inumber & 0xFFFFFFFF)), (void *)args->dp, (void *)args->trans, - (void *)(unsigned long)args->justcheck, + (void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK), (void *)(bp ? bp->bps[0] : NULL), NULL); } @@ -117,7 +118,7 @@ xfs_dir2_trace_args_bb( (void *)((unsigned long)(args->inumber >> 32)), (void *)((unsigned long)(args->inumber & 0xFFFFFFFF)), (void *)args->dp, (void *)args->trans, - (void *)(unsigned long)args->justcheck, + (void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK), (void *)(lbp ? lbp->bps[0] : NULL), (void *)(dbp ? dbp->bps[0] : NULL)); } @@ -157,8 +158,8 @@ xfs_dir2_trace_args_db( (void *)((unsigned long)(args->inumber >> 32)), (void *)((unsigned long)(args->inumber & 0xFFFFFFFF)), (void *)args->dp, (void *)args->trans, - (void *)(unsigned long)args->justcheck, (void *)(long)db, - (void *)dbp); + (void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK), + (void *)(long)db, (void *)dbp); } void @@ -173,7 +174,7 @@ xfs_dir2_trace_args_i( (void *)((unsigned long)(args->inumber >> 32)), (void *)((unsigned long)(args->inumber & 0xFFFFFFFF)), (void *)args->dp, (void *)args->trans, - (void *)(unsigned long)args->justcheck, + (void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK), (void *)((unsigned long)(i >> 32)), (void *)((unsigned long)(i & 0xFFFFFFFF))); } @@ -190,7 +191,8 @@ xfs_dir2_trace_args_s( (void *)((unsigned long)(args->inumber >> 32)), (void *)((unsigned long)(args->inumber & 0xFFFFFFFF)), (void *)args->dp, (void *)args->trans, - (void *)(unsigned long)args->justcheck, (void *)(long)s, NULL); + (void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK), + (void *)(long)s, NULL); } void @@ -208,7 +210,7 @@ xfs_dir2_trace_args_sb( (void *)((unsigned long)(args->inumber >> 32)), (void *)((unsigned long)(args->inumber & 0xFFFFFFFF)), (void *)args->dp, (void *)args->trans, - (void *)(unsigned long)args->justcheck, (void *)(long)s, - (void *)dbp); + (void *)(unsigned long)(args->op_flags & XFS_DA_OP_JUSTCHECK), + (void *)(long)s, (void *)dbp); } #endif /* XFS_DIR2_TRACE */ -- GitLab From 9403540c0653122ca34884a180439ddbfcbcb524 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Wed, 21 May 2008 16:50:46 +1000 Subject: [PATCH 0140/1024] dcache: Add case-insensitive support d_ci_add() routine This add a dcache entry to the dcache for lookup, but changing the name that is associated with the entry rather than the one passed in to the lookup routine. First, it sees if the case-exact match already exists in the dcache and uses it if one exists. Otherwise, it allocates a new node with the new name and splices it into the dcache. Original code from ntfs_lookup in fs/ntfs/namei.c by Anton Altaparmakov. Signed-off-by: Barry Naujok Signed-off-by: Anton Altaparmakov Acked-by: Christoph Hellwig --- fs/dcache.c | 102 +++++++++++++++++++++++++++++++++++++++++ include/linux/dcache.h | 1 + 2 files changed, 103 insertions(+) diff --git a/fs/dcache.c b/fs/dcache.c index f2584d22cb4..101663d15e9 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1220,6 +1220,107 @@ struct dentry *d_splice_alias(struct inode *inode, struct dentry *dentry) return new; } +/** + * d_add_ci - lookup or allocate new dentry with case-exact name + * @inode: the inode case-insensitive lookup has found + * @dentry: the negative dentry that was passed to the parent's lookup func + * @name: the case-exact name to be associated with the returned dentry + * + * This is to avoid filling the dcache with case-insensitive names to the + * same inode, only the actual correct case is stored in the dcache for + * case-insensitive filesystems. + * + * For a case-insensitive lookup match and if the the case-exact dentry + * already exists in in the dcache, use it and return it. + * + * If no entry exists with the exact case name, allocate new dentry with + * the exact case, and return the spliced entry. + */ +struct dentry *d_add_ci(struct inode *inode, struct dentry *dentry, + struct qstr *name) +{ + int error; + struct dentry *found; + struct dentry *new; + + /* Does a dentry matching the name exist already? */ + found = d_hash_and_lookup(dentry->d_parent, name); + /* If not, create it now and return */ + if (!found) { + new = d_alloc(dentry->d_parent, name); + if (!new) { + error = -ENOMEM; + goto err_out; + } + found = d_splice_alias(inode, new); + if (found) { + dput(new); + return found; + } + return new; + } + /* Matching dentry exists, check if it is negative. */ + if (found->d_inode) { + if (unlikely(found->d_inode != inode)) { + /* This can't happen because bad inodes are unhashed. */ + BUG_ON(!is_bad_inode(inode)); + BUG_ON(!is_bad_inode(found->d_inode)); + } + /* + * Already have the inode and the dentry attached, decrement + * the reference count to balance the iget() done + * earlier on. We found the dentry using d_lookup() so it + * cannot be disconnected and thus we do not need to worry + * about any NFS/disconnectedness issues here. + */ + iput(inode); + return found; + } + /* + * Negative dentry: instantiate it unless the inode is a directory and + * has a 'disconnected' dentry (i.e. IS_ROOT and DCACHE_DISCONNECTED), + * in which case d_move() that in place of the found dentry. + */ + if (!S_ISDIR(inode->i_mode)) { + /* Not a directory; everything is easy. */ + d_instantiate(found, inode); + return found; + } + spin_lock(&dcache_lock); + if (list_empty(&inode->i_dentry)) { + /* + * Directory without a 'disconnected' dentry; we need to do + * d_instantiate() by hand because it takes dcache_lock which + * we already hold. + */ + list_add(&found->d_alias, &inode->i_dentry); + found->d_inode = inode; + spin_unlock(&dcache_lock); + security_d_instantiate(found, inode); + return found; + } + /* + * Directory with a 'disconnected' dentry; get a reference to the + * 'disconnected' dentry. + */ + new = list_entry(inode->i_dentry.next, struct dentry, d_alias); + dget_locked(new); + spin_unlock(&dcache_lock); + /* Do security vodoo. */ + security_d_instantiate(found, inode); + /* Move new in place of found. */ + d_move(new, found); + /* Balance the iget() we did above. */ + iput(inode); + /* Throw away found. */ + dput(found); + /* Use new as the actual dentry. */ + return new; + +err_out: + iput(inode); + return ERR_PTR(error); +} /** * d_lookup - search for a dentry @@ -2254,6 +2355,7 @@ EXPORT_SYMBOL(d_path); EXPORT_SYMBOL(d_prune_aliases); EXPORT_SYMBOL(d_rehash); EXPORT_SYMBOL(d_splice_alias); +EXPORT_SYMBOL(d_add_ci); EXPORT_SYMBOL(d_validate); EXPORT_SYMBOL(dget_locked); EXPORT_SYMBOL(dput); diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 98202c672fd..07aa198f19e 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -230,6 +230,7 @@ extern void d_delete(struct dentry *); extern struct dentry * d_alloc(struct dentry *, const struct qstr *); extern struct dentry * d_alloc_anon(struct inode *); extern struct dentry * d_splice_alias(struct inode *, struct dentry *); +extern struct dentry * d_add_ci(struct inode *, struct dentry *, struct qstr *); extern void shrink_dcache_sb(struct super_block *); extern void shrink_dcache_parent(struct dentry *); extern void shrink_dcache_for_umount(struct super_block *); -- GitLab From 384f3ced07efdddf6838f6527366089d37843c94 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Wed, 21 May 2008 16:58:22 +1000 Subject: [PATCH 0141/1024] [XFS] Return case-insensitive match for dentry cache This implements the code to store the actual filename found during a lookup in the dentry cache and to avoid multiple entries in the dcache pointing to the same inode. To avoid polluting the dcache, we implement a new directory inode operations for lookup. xfs_vn_ci_lookup() stores the correct case name in the dcache. The "actual name" is only allocated and returned for a case- insensitive match and not an actual match. Another unusual interaction with the dcache is not storing negative dentries like other filesystems doing a d_add(dentry, NULL) when an ENOENT is returned. During the VFS lookup, if a dentry returned has no inode, dput is called and ENOENT is returned. By not doing a d_add, this actually removes it completely from the dcache to be reused. create/rename have to be modified to support unhashed dentries being passed in. SGI-PV: 981521 SGI-Modid: xfs-linux-melb:xfs-kern:31208a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig --- fs/xfs/linux-2.6/xfs_export.c | 2 +- fs/xfs/linux-2.6/xfs_iops.c | 57 ++++++++++++++++++++++++++++++++++- fs/xfs/linux-2.6/xfs_iops.h | 1 + fs/xfs/xfs_da_btree.h | 1 + fs/xfs/xfs_dir2.c | 40 ++++++++++++++++++++++-- fs/xfs/xfs_dir2.h | 6 +++- fs/xfs/xfs_dir2_block.c | 9 +++--- fs/xfs/xfs_dir2_leaf.c | 5 +-- fs/xfs/xfs_dir2_node.c | 16 +++++++--- fs/xfs/xfs_dir2_sf.c | 17 ++++++----- fs/xfs/xfs_vnodeops.c | 19 +++++++++--- fs/xfs/xfs_vnodeops.h | 2 +- 12 files changed, 146 insertions(+), 29 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_export.c b/fs/xfs/linux-2.6/xfs_export.c index c672b3238b1..987fe84f7b1 100644 --- a/fs/xfs/linux-2.6/xfs_export.c +++ b/fs/xfs/linux-2.6/xfs_export.c @@ -215,7 +215,7 @@ xfs_fs_get_parent( struct xfs_inode *cip; struct dentry *parent; - error = xfs_lookup(XFS_I(child->d_inode), &xfs_name_dotdot, &cip); + error = xfs_lookup(XFS_I(child->d_inode), &xfs_name_dotdot, &cip, NULL); if (unlikely(error)) return ERR_PTR(-error); diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 13b6cfd366c..9f0f8ee8d44 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -382,7 +382,7 @@ xfs_vn_lookup( return ERR_PTR(-ENAMETOOLONG); xfs_dentry_to_name(&name, dentry); - error = xfs_lookup(XFS_I(dir), &name, &cip); + error = xfs_lookup(XFS_I(dir), &name, &cip, NULL); if (unlikely(error)) { if (unlikely(error != ENOENT)) return ERR_PTR(-error); @@ -393,6 +393,42 @@ xfs_vn_lookup( return d_splice_alias(cip->i_vnode, dentry); } +STATIC struct dentry * +xfs_vn_ci_lookup( + struct inode *dir, + struct dentry *dentry, + struct nameidata *nd) +{ + struct xfs_inode *ip; + struct xfs_name xname; + struct xfs_name ci_name; + struct qstr dname; + int error; + + if (dentry->d_name.len >= MAXNAMELEN) + return ERR_PTR(-ENAMETOOLONG); + + xfs_dentry_to_name(&xname, dentry); + error = xfs_lookup(XFS_I(dir), &xname, &ip, &ci_name); + if (unlikely(error)) { + if (unlikely(error != ENOENT)) + return ERR_PTR(-error); + d_add(dentry, NULL); + return NULL; + } + + /* if exact match, just splice and exit */ + if (!ci_name.name) + return d_splice_alias(ip->i_vnode, dentry); + + /* else case-insensitive match... */ + dname.name = ci_name.name; + dname.len = ci_name.len; + dentry = d_add_ci(ip->i_vnode, dentry, &dname); + kmem_free(ci_name.name); + return dentry; +} + STATIC int xfs_vn_link( struct dentry *old_dentry, @@ -892,6 +928,25 @@ const struct inode_operations xfs_dir_inode_operations = { .removexattr = xfs_vn_removexattr, }; +const struct inode_operations xfs_dir_ci_inode_operations = { + .create = xfs_vn_create, + .lookup = xfs_vn_ci_lookup, + .link = xfs_vn_link, + .unlink = xfs_vn_unlink, + .symlink = xfs_vn_symlink, + .mkdir = xfs_vn_mkdir, + .rmdir = xfs_vn_rmdir, + .mknod = xfs_vn_mknod, + .rename = xfs_vn_rename, + .permission = xfs_vn_permission, + .getattr = xfs_vn_getattr, + .setattr = xfs_vn_setattr, + .setxattr = xfs_vn_setxattr, + .getxattr = xfs_vn_getxattr, + .listxattr = xfs_vn_listxattr, + .removexattr = xfs_vn_removexattr, +}; + const struct inode_operations xfs_symlink_inode_operations = { .readlink = generic_readlink, .follow_link = xfs_vn_follow_link, diff --git a/fs/xfs/linux-2.6/xfs_iops.h b/fs/xfs/linux-2.6/xfs_iops.h index 14d0deb7aff..3b4df5863e4 100644 --- a/fs/xfs/linux-2.6/xfs_iops.h +++ b/fs/xfs/linux-2.6/xfs_iops.h @@ -20,6 +20,7 @@ extern const struct inode_operations xfs_inode_operations; extern const struct inode_operations xfs_dir_inode_operations; +extern const struct inode_operations xfs_dir_ci_inode_operations; extern const struct inode_operations xfs_symlink_inode_operations; extern const struct file_operations xfs_file_operations; diff --git a/fs/xfs/xfs_da_btree.h b/fs/xfs/xfs_da_btree.h index 8face64c11f..8be0b00ede9 100644 --- a/fs/xfs/xfs_da_btree.h +++ b/fs/xfs/xfs_da_btree.h @@ -143,6 +143,7 @@ typedef struct xfs_da_args { #define XFS_DA_OP_RENAME 0x0002 /* this is an atomic rename op */ #define XFS_DA_OP_ADDNAME 0x0004 /* this is an add operation */ #define XFS_DA_OP_OKNOENT 0x0008 /* lookup/add op, ENOENT ok, else die */ +#define XFS_DA_OP_CILOOKUP 0x0010 /* lookup to return CI name if found */ /* * Structure to describe buffer(s) for a block. diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index 3387acd3e47..882609c699c 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -192,15 +192,44 @@ xfs_dir_createname( return rval; } +/* + * If doing a CI lookup and case-insensitive match, dup actual name into + * args.value. Return EEXIST for success (ie. name found) or an error. + */ +int +xfs_dir_cilookup_result( + struct xfs_da_args *args, + const char *name, + int len) +{ + if (args->cmpresult == XFS_CMP_DIFFERENT) + return ENOENT; + if (args->cmpresult != XFS_CMP_CASE || + !(args->op_flags & XFS_DA_OP_CILOOKUP)) + return EEXIST; + + args->value = kmem_alloc(len, KM_MAYFAIL); + if (!args->value) + return ENOMEM; + + memcpy(args->value, name, len); + args->valuelen = len; + return EEXIST; +} + /* * Lookup a name in a directory, give back the inode number. + * If ci_name is not NULL, returns the actual name in ci_name if it differs + * to name, or ci_name->name is set to NULL for an exact match. */ + int xfs_dir_lookup( xfs_trans_t *tp, xfs_inode_t *dp, struct xfs_name *name, - xfs_ino_t *inum) /* out: inode number */ + xfs_ino_t *inum, /* out: inode number */ + struct xfs_name *ci_name) /* out: actual name if CI match */ { xfs_da_args_t args; int rval; @@ -217,6 +246,8 @@ xfs_dir_lookup( args.whichfork = XFS_DATA_FORK; args.trans = tp; args.op_flags = XFS_DA_OP_OKNOENT; + if (ci_name) + args.op_flags |= XFS_DA_OP_CILOOKUP; args.cmpresult = XFS_CMP_DIFFERENT; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) @@ -233,8 +264,13 @@ xfs_dir_lookup( rval = xfs_dir2_node_lookup(&args); if (rval == EEXIST) rval = 0; - if (rval == 0) + if (!rval) { *inum = args.inumber; + if (ci_name) { + ci_name->name = args.value; + ci_name->len = args.valuelen; + } + } return rval; } diff --git a/fs/xfs/xfs_dir2.h b/fs/xfs/xfs_dir2.h index 6392f939029..1d9ef96f33a 100644 --- a/fs/xfs/xfs_dir2.h +++ b/fs/xfs/xfs_dir2.h @@ -74,7 +74,8 @@ extern int xfs_dir_createname(struct xfs_trans *tp, struct xfs_inode *dp, xfs_fsblock_t *first, struct xfs_bmap_free *flist, xfs_extlen_t tot); extern int xfs_dir_lookup(struct xfs_trans *tp, struct xfs_inode *dp, - struct xfs_name *name, xfs_ino_t *inum); + struct xfs_name *name, xfs_ino_t *inum, + struct xfs_name *ci_name); extern int xfs_dir_removename(struct xfs_trans *tp, struct xfs_inode *dp, struct xfs_name *name, xfs_ino_t ino, xfs_fsblock_t *first, @@ -99,4 +100,7 @@ extern int xfs_dir2_isleaf(struct xfs_trans *tp, struct xfs_inode *dp, extern int xfs_dir2_shrink_inode(struct xfs_da_args *args, xfs_dir2_db_t db, struct xfs_dabuf *bp); +extern int xfs_dir_cilookup_result(struct xfs_da_args *args, const char *name, + int len); + #endif /* __XFS_DIR2_H__ */ diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c index dee225918db..e2fa0a1d8e9 100644 --- a/fs/xfs/xfs_dir2_block.c +++ b/fs/xfs/xfs_dir2_block.c @@ -610,14 +610,15 @@ xfs_dir2_block_lookup( /* * Get the offset from the leaf entry, to point to the data. */ - dep = (xfs_dir2_data_entry_t *) - ((char *)block + xfs_dir2_dataptr_to_off(mp, be32_to_cpu(blp[ent].address))); + dep = (xfs_dir2_data_entry_t *)((char *)block + + xfs_dir2_dataptr_to_off(mp, be32_to_cpu(blp[ent].address))); /* - * Fill in inode number, release the block. + * Fill in inode number, CI name if appropriate, release the block. */ args->inumber = be64_to_cpu(dep->inumber); + error = xfs_dir_cilookup_result(args, dep->name, dep->namelen); xfs_da_brelse(args->trans, bp); - return XFS_ERROR(EEXIST); + return XFS_ERROR(error); } /* diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index 2ebbed4f1b0..f110242d6df 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -1299,12 +1299,13 @@ xfs_dir2_leaf_lookup( ((char *)dbp->data + xfs_dir2_dataptr_to_off(dp->i_mount, be32_to_cpu(lep->address))); /* - * Return the found inode number. + * Return the found inode number & CI name if appropriate */ args->inumber = be64_to_cpu(dep->inumber); + error = xfs_dir_cilookup_result(args, dep->name, dep->namelen); xfs_da_brelse(tp, dbp); xfs_da_brelse(tp, lbp); - return XFS_ERROR(EEXIST); + return XFS_ERROR(error); } /* diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c index c71cff85950..1b543022346 100644 --- a/fs/xfs/xfs_dir2_node.c +++ b/fs/xfs/xfs_dir2_node.c @@ -549,7 +549,7 @@ xfs_dir2_leafn_lookup_for_entry( xfs_dir2_data_entry_t *dep; /* data block entry */ xfs_inode_t *dp; /* incore directory inode */ int error; /* error return value */ - int di; /* data entry index */ + int di = -1; /* data entry index */ int index; /* leaf entry index */ xfs_dir2_leaf_t *leaf; /* leaf structure */ xfs_dir2_leaf_entry_t *lep; /* leaf entry */ @@ -577,6 +577,7 @@ xfs_dir2_leafn_lookup_for_entry( if (state->extravalid) { curbp = state->extrablk.bp; curdb = state->extrablk.blkno; + di = state->extrablk.index; } /* * Loop over leaf entries with the right hash value. @@ -637,7 +638,6 @@ xfs_dir2_leafn_lookup_for_entry( } /* Didn't find an exact match. */ error = ENOENT; - di = -1; ASSERT(index == be16_to_cpu(leaf->hdr.count) || (args->op_flags & XFS_DA_OP_OKNOENT)); out: @@ -652,7 +652,7 @@ out: state->extravalid = 0; } /* - * Return the index, that will be the insertion point. + * Return the index, that will be the deletion point for remove/replace. */ *indexp = index; return XFS_ERROR(error); @@ -1820,8 +1820,14 @@ xfs_dir2_node_lookup( error = xfs_da_node_lookup_int(state, &rval); if (error) rval = error; - else if (rval == ENOENT && args->cmpresult == XFS_CMP_CASE) - rval = EEXIST; /* a case-insensitive match was found */ + else if (rval == ENOENT && args->cmpresult == XFS_CMP_CASE) { + /* If a CI match, dup the actual name and return EEXIST */ + xfs_dir2_data_entry_t *dep; + + dep = (xfs_dir2_data_entry_t *)((char *)state->extrablk.bp-> + data + state->extrablk.index); + rval = xfs_dir_cilookup_result(args, dep->name, dep->namelen); + } /* * Release the btree blocks and leaf block. */ diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c index 9409fd3e565..b46af0013ec 100644 --- a/fs/xfs/xfs_dir2_sf.c +++ b/fs/xfs/xfs_dir2_sf.c @@ -812,9 +812,11 @@ xfs_dir2_sf_lookup( { xfs_inode_t *dp; /* incore directory inode */ int i; /* entry index */ + int error; xfs_dir2_sf_entry_t *sfep; /* shortform directory entry */ xfs_dir2_sf_t *sfp; /* shortform structure */ enum xfs_dacmp cmp; /* comparison result */ + xfs_dir2_sf_entry_t *ci_sfep; /* case-insens. entry */ xfs_dir2_trace_args("sf_lookup", args); xfs_dir2_sf_check(args); @@ -852,6 +854,7 @@ xfs_dir2_sf_lookup( /* * Loop over all the entries trying to match ours. */ + ci_sfep = NULL; for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->hdr.count; i++, sfep = xfs_dir2_sf_nextentry(sfp, sfep)) { /* @@ -867,19 +870,19 @@ xfs_dir2_sf_lookup( xfs_dir2_sf_inumberp(sfep)); if (cmp == XFS_CMP_EXACT) return XFS_ERROR(EEXIST); + ci_sfep = sfep; } } ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); /* * Here, we can only be doing a lookup (not a rename or replace). - * If a case-insensitive match was found earlier, return "found". + * If a case-insensitive match was not found, return ENOENT. */ - if (args->cmpresult == XFS_CMP_CASE) - return XFS_ERROR(EEXIST); - /* - * Didn't find it. - */ - return XFS_ERROR(ENOENT); + if (!ci_sfep) + return XFS_ERROR(ENOENT); + /* otherwise process the CI match as required by the caller */ + error = xfs_dir_cilookup_result(args, ci_sfep->name, ci_sfep->namelen); + return XFS_ERROR(error); } /* diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 9b8b87fcd4e..b6a065eb25a 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -1610,12 +1610,18 @@ xfs_inactive( return VN_INACTIVE_CACHE; } - +/* + * Lookups up an inode from "name". If ci_name is not NULL, then a CI match + * is allowed, otherwise it has to be an exact match. If a CI match is found, + * ci_name->name will point to a the actual name (caller must free) or + * will be set to NULL if an exact match is found. + */ int xfs_lookup( xfs_inode_t *dp, struct xfs_name *name, - xfs_inode_t **ipp) + xfs_inode_t **ipp, + struct xfs_name *ci_name) { xfs_ino_t inum; int error; @@ -1627,7 +1633,7 @@ xfs_lookup( return XFS_ERROR(EIO); lock_mode = xfs_ilock_map_shared(dp); - error = xfs_dir_lookup(NULL, dp, name, &inum); + error = xfs_dir_lookup(NULL, dp, name, &inum, ci_name); xfs_iunlock_map_shared(dp, lock_mode); if (error) @@ -1635,12 +1641,15 @@ xfs_lookup( error = xfs_iget(dp->i_mount, NULL, inum, 0, 0, ipp, 0); if (error) - goto out; + goto out_free_name; xfs_itrace_ref(*ipp); return 0; - out: +out_free_name: + if (ci_name) + kmem_free(ci_name->name); +out: *ipp = NULL; return error; } diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h index 57335ba4ce5..7e9a8b241f2 100644 --- a/fs/xfs/xfs_vnodeops.h +++ b/fs/xfs/xfs_vnodeops.h @@ -22,7 +22,7 @@ int xfs_fsync(struct xfs_inode *ip); int xfs_release(struct xfs_inode *ip); int xfs_inactive(struct xfs_inode *ip); int xfs_lookup(struct xfs_inode *dp, struct xfs_name *name, - struct xfs_inode **ipp); + struct xfs_inode **ipp, struct xfs_name *ci_name); int xfs_create(struct xfs_inode *dp, struct xfs_name *name, mode_t mode, xfs_dev_t rdev, struct xfs_inode **ipp, struct cred *credp); int xfs_remove(struct xfs_inode *dp, struct xfs_name *name, -- GitLab From 189f4bf22bdc3c2402b038016d11fd3cb1c89f07 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Wed, 21 May 2008 16:58:55 +1000 Subject: [PATCH 0142/1024] [XFS] XFS: ASCII case-insensitive support Implement ASCII case-insensitive support. It's primary purpose is for supporting existing filesystems that already use this case-insensitive mode migrated from IRIX. But, if you only need ASCII-only case-insensitive support (ie. English only) and will never use another language, then this mode is perfectly adequate. ASCII-CI is implemented by generating hashes based on lower-case letters and doing lower-case compares. It implements a new xfs_nameops vector for doing the hashes and comparisons for all filename operations. To create a filesystem with this CI mode, use: # mkfs.xfs -n version=ci SGI-PV: 981516 SGI-Modid: xfs-linux-melb:xfs-kern:31209a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig --- fs/xfs/linux-2.6/xfs_linux.h | 1 + fs/xfs/linux-2.6/xfs_super.c | 5 +++- fs/xfs/xfs_dir2.c | 51 +++++++++++++++++++++++++++++++++++- fs/xfs/xfs_fs.h | 1 + fs/xfs/xfs_fsops.c | 4 ++- fs/xfs/xfs_sb.h | 10 ++++++- 6 files changed, 68 insertions(+), 4 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_linux.h b/fs/xfs/linux-2.6/xfs_linux.h index 4edc46915b5..aded57321b1 100644 --- a/fs/xfs/linux-2.6/xfs_linux.h +++ b/fs/xfs/linux-2.6/xfs_linux.h @@ -76,6 +76,7 @@ #include #include #include +#include #include #include diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 41eea24a46e..cce59cc6e74 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -569,7 +569,10 @@ xfs_set_inodeops( inode->i_mapping->a_ops = &xfs_address_space_operations; break; case S_IFDIR: - inode->i_op = &xfs_dir_inode_operations; + if (xfs_sb_version_hasasciici(&XFS_M(inode->i_sb)->m_sb)) + inode->i_op = &xfs_dir_ci_inode_operations; + else + inode->i_op = &xfs_dir_inode_operations; inode->i_fop = &xfs_dir_file_operations; break; case S_IFLNK: diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index 882609c699c..b445ec31476 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -48,6 +48,52 @@ struct xfs_name xfs_name_dotdot = {"..", 2}; extern const struct xfs_nameops xfs_default_nameops; +/* + * ASCII case-insensitive (ie. A-Z) support for directories that was + * used in IRIX. + */ +STATIC xfs_dahash_t +xfs_ascii_ci_hashname( + struct xfs_name *name) +{ + xfs_dahash_t hash; + int i; + + for (i = 0, hash = 0; i < name->len; i++) + hash = tolower(name->name[i]) ^ rol32(hash, 7); + + return hash; +} + +STATIC enum xfs_dacmp +xfs_ascii_ci_compname( + struct xfs_da_args *args, + const char *name, + int len) +{ + enum xfs_dacmp result; + int i; + + if (args->namelen != len) + return XFS_CMP_DIFFERENT; + + result = XFS_CMP_EXACT; + for (i = 0; i < len; i++) { + if (args->name[i] == name[i]) + continue; + if (tolower(args->name[i]) != tolower(name[i])) + return XFS_CMP_DIFFERENT; + result = XFS_CMP_CASE; + } + + return result; +} + +static struct xfs_nameops xfs_ascii_ci_nameops = { + .hashname = xfs_ascii_ci_hashname, + .compname = xfs_ascii_ci_compname, +}; + void xfs_dir_mount( xfs_mount_t *mp) @@ -67,7 +113,10 @@ xfs_dir_mount( (mp->m_dirblksize - (uint)sizeof(xfs_da_node_hdr_t)) / (uint)sizeof(xfs_da_node_entry_t); mp->m_dir_magicpct = (mp->m_dirblksize * 37) / 100; - mp->m_dirnameops = &xfs_default_nameops; + if (xfs_sb_version_hasasciici(&mp->m_sb)) + mp->m_dirnameops = &xfs_ascii_ci_nameops; + else + mp->m_dirnameops = &xfs_default_nameops; } /* diff --git a/fs/xfs/xfs_fs.h b/fs/xfs/xfs_fs.h index 3bed6433d05..6ca749897c5 100644 --- a/fs/xfs/xfs_fs.h +++ b/fs/xfs/xfs_fs.h @@ -239,6 +239,7 @@ typedef struct xfs_fsop_resblks { #define XFS_FSOP_GEOM_FLAGS_LOGV2 0x0100 /* log format version 2 */ #define XFS_FSOP_GEOM_FLAGS_SECTOR 0x0200 /* sector sizes >1BB */ #define XFS_FSOP_GEOM_FLAGS_ATTR2 0x0400 /* inline attributes rework */ +#define XFS_FSOP_GEOM_FLAGS_DIRV2CI 0x1000 /* ASCII only CI names */ #define XFS_FSOP_GEOM_FLAGS_LAZYSB 0x4000 /* lazy superblock counters */ diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c index 381ebda4f7b..84583cf73db 100644 --- a/fs/xfs/xfs_fsops.c +++ b/fs/xfs/xfs_fsops.c @@ -95,6 +95,8 @@ xfs_fs_geometry( XFS_FSOP_GEOM_FLAGS_DIRV2 : 0) | (xfs_sb_version_hassector(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_SECTOR : 0) | + (xfs_sb_version_hasasciici(&mp->m_sb) ? + XFS_FSOP_GEOM_FLAGS_DIRV2CI : 0) | (xfs_sb_version_haslazysbcount(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_LAZYSB : 0) | (xfs_sb_version_hasattr2(&mp->m_sb) ? @@ -625,7 +627,7 @@ xfs_fs_goingdown( xfs_force_shutdown(mp, SHUTDOWN_FORCE_UMOUNT); thaw_bdev(sb->s_bdev, sb); } - + break; } case XFS_FSOP_GOING_FLAGS_LOGFLUSH: diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h index e3204a36a22..3f8cf1587f4 100644 --- a/fs/xfs/xfs_sb.h +++ b/fs/xfs/xfs_sb.h @@ -46,10 +46,12 @@ struct xfs_mount; #define XFS_SB_VERSION_SECTORBIT 0x0800 #define XFS_SB_VERSION_EXTFLGBIT 0x1000 #define XFS_SB_VERSION_DIRV2BIT 0x2000 +#define XFS_SB_VERSION_BORGBIT 0x4000 /* ASCII only case-insens. */ #define XFS_SB_VERSION_MOREBITSBIT 0x8000 #define XFS_SB_VERSION_OKSASHFBITS \ (XFS_SB_VERSION_EXTFLGBIT | \ - XFS_SB_VERSION_DIRV2BIT) + XFS_SB_VERSION_DIRV2BIT | \ + XFS_SB_VERSION_BORGBIT) #define XFS_SB_VERSION_OKREALFBITS \ (XFS_SB_VERSION_ATTRBIT | \ XFS_SB_VERSION_NLINKBIT | \ @@ -437,6 +439,12 @@ static inline int xfs_sb_version_hassector(xfs_sb_t *sbp) ((sbp)->sb_versionnum & XFS_SB_VERSION_SECTORBIT); } +static inline int xfs_sb_version_hasasciici(xfs_sb_t *sbp) +{ + return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \ + (sbp->sb_versionnum & XFS_SB_VERSION_BORGBIT); +} + static inline int xfs_sb_version_hasmorebits(xfs_sb_t *sbp) { return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \ -- GitLab From d3689d7687dbbc46c5004557d53349f6952fbc93 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Wed, 21 May 2008 18:38:40 +1000 Subject: [PATCH 0143/1024] [XFS] kmem_free and kmem_realloc to use const void * SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31212a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig --- fs/xfs/linux-2.6/kmem.c | 4 ++-- fs/xfs/linux-2.6/kmem.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/xfs/linux-2.6/kmem.c b/fs/xfs/linux-2.6/kmem.c index 69233a52f0a..1cd3b55ee3d 100644 --- a/fs/xfs/linux-2.6/kmem.c +++ b/fs/xfs/linux-2.6/kmem.c @@ -90,7 +90,7 @@ kmem_zalloc_greedy(size_t *size, size_t minsize, size_t maxsize, } void -kmem_free(void *ptr) +kmem_free(const void *ptr) { if (!is_vmalloc_addr(ptr)) { kfree(ptr); @@ -100,7 +100,7 @@ kmem_free(void *ptr) } void * -kmem_realloc(void *ptr, size_t newsize, size_t oldsize, +kmem_realloc(const void *ptr, size_t newsize, size_t oldsize, unsigned int __nocast flags) { void *new; diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/linux-2.6/kmem.h index a3c96207e60..af6843c7ee4 100644 --- a/fs/xfs/linux-2.6/kmem.h +++ b/fs/xfs/linux-2.6/kmem.h @@ -57,8 +57,8 @@ kmem_flags_convert(unsigned int __nocast flags) extern void *kmem_alloc(size_t, unsigned int __nocast); extern void *kmem_zalloc(size_t, unsigned int __nocast); extern void *kmem_zalloc_greedy(size_t *, size_t, size_t, unsigned int __nocast); -extern void *kmem_realloc(void *, size_t, size_t, unsigned int __nocast); -extern void kmem_free(void *); +extern void *kmem_realloc(const void *, size_t, size_t, unsigned int __nocast); +extern void kmem_free(const void *); /* * Zone interfaces -- GitLab From 866d5dc974682c6247d5fde94dbc6545f864e7d7 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Thu, 22 May 2008 17:21:40 +1000 Subject: [PATCH 0144/1024] [XFS] Remove d_add call for an ENOENT lookup return code SGI-PV: 981521 SGI-Modid: xfs-linux-melb:xfs-kern:31214a Signed-off-by: Barry Naujok Signed-off-by: David Chinner --- fs/xfs/linux-2.6/xfs_iops.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 9f0f8ee8d44..62330f28395 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -413,7 +413,11 @@ xfs_vn_ci_lookup( if (unlikely(error)) { if (unlikely(error != ENOENT)) return ERR_PTR(-error); - d_add(dentry, NULL); + /* + * call d_add(dentry, NULL) here when d_drop_negative_children + * is called in xfs_vn_mknod (ie. allow negative dentries + * with CI filesystems). + */ return NULL; } -- GitLab From 87affd08bc9c741b99053cabb908cf54a135a0fa Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Tue, 3 Jun 2008 11:59:18 +1000 Subject: [PATCH 0145/1024] [XFS] Zero uninitialised xfs_da_args structure in xfs_dir2.c Fixes a problem in the xfs_dir2_remove and xfs_dir2_replace paths which intenally call directory format specific lookup funtions that assume args->cmpresult is zeroed. SGI-PV: 982606 SGI-Modid: xfs-linux-melb:xfs-kern:31268a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_dir2.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/xfs/xfs_dir2.c b/fs/xfs/xfs_dir2.c index b445ec31476..80e0dc51361 100644 --- a/fs/xfs/xfs_dir2.c +++ b/fs/xfs/xfs_dir2.c @@ -214,6 +214,7 @@ xfs_dir_createname( return rval; XFS_STATS_INC(xs_dir_create); + memset(&args, 0, sizeof(xfs_da_args_t)); args.name = name->name; args.namelen = name->len; args.hashval = dp->i_mount->m_dirnameops->hashname(name); @@ -286,8 +287,8 @@ xfs_dir_lookup( ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR); XFS_STATS_INC(xs_dir_lookup); - memset(&args, 0, sizeof(xfs_da_args_t)); + memset(&args, 0, sizeof(xfs_da_args_t)); args.name = name->name; args.namelen = name->len; args.hashval = dp->i_mount->m_dirnameops->hashname(name); @@ -297,7 +298,6 @@ xfs_dir_lookup( args.op_flags = XFS_DA_OP_OKNOENT; if (ci_name) args.op_flags |= XFS_DA_OP_CILOOKUP; - args.cmpresult = XFS_CMP_DIFFERENT; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_lookup(&args); @@ -343,6 +343,7 @@ xfs_dir_removename( ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR); XFS_STATS_INC(xs_dir_remove); + memset(&args, 0, sizeof(xfs_da_args_t)); args.name = name->name; args.namelen = name->len; args.hashval = dp->i_mount->m_dirnameops->hashname(name); @@ -353,7 +354,6 @@ xfs_dir_removename( args.total = total; args.whichfork = XFS_DATA_FORK; args.trans = tp; - args.op_flags = 0; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_removename(&args); @@ -426,6 +426,7 @@ xfs_dir_replace( if ((rval = xfs_dir_ino_validate(tp->t_mountp, inum))) return rval; + memset(&args, 0, sizeof(xfs_da_args_t)); args.name = name->name; args.namelen = name->len; args.hashval = dp->i_mount->m_dirnameops->hashname(name); @@ -436,7 +437,6 @@ xfs_dir_replace( args.total = total; args.whichfork = XFS_DATA_FORK; args.trans = tp; - args.op_flags = 0; if (dp->i_d.di_format == XFS_DINODE_FMT_LOCAL) rval = xfs_dir2_sf_replace(&args); @@ -472,8 +472,8 @@ xfs_dir_canenter( return 0; ASSERT((dp->i_d.di_mode & S_IFMT) == S_IFDIR); - memset(&args, 0, sizeof(xfs_da_args_t)); + memset(&args, 0, sizeof(xfs_da_args_t)); args.name = name->name; args.namelen = name->len; args.hashval = dp->i_mount->m_dirnameops->hashname(name); -- GitLab From d532506cd8b59543b376e155508f88a03a81dad1 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Mon, 16 Jun 2008 12:07:41 +1000 Subject: [PATCH 0146/1024] [XFS] Invalidate dentry in unlink/rmdir if in case-insensitive mode The vfs_unlink/d_delete functionality in the Linux VFS make the dentry negative if it is the only inode being referenced. Case-insensitive mode doesn't work with negative dentries, so if using CI-mode, invalidate the dentry on unlink/rmdir. SGI-PV: 983102 SGI-Modid: xfs-linux-melb:xfs-kern:31308a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig --- fs/xfs/linux-2.6/xfs_iops.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 62330f28395..190ed61bcd4 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -475,6 +475,13 @@ xfs_vn_unlink( if (likely(!error)) { xfs_validate_fields(dir); /* size needs update */ xfs_validate_fields(inode); + /* + * With unlink, the VFS makes the dentry "negative": no inode, + * but still hashed. This is incompatible with case-insensitive + * mode, so invalidate (unhash) the dentry in CI-mode. + */ + if (xfs_sb_version_hasasciici(&XFS_M(dir->i_sb)->m_sb)) + d_invalidate(dentry); } return -error; } @@ -531,6 +538,13 @@ xfs_vn_rmdir( if (likely(!error)) { xfs_validate_fields(inode); xfs_validate_fields(dir); + /* + * With rmdir, the VFS makes the dentry "negative": no inode, + * but still hashed. This is incompatible with case-insensitive + * mode, so invalidate (unhash) the dentry in CI-mode. + */ + if (xfs_sb_version_hasasciici(&XFS_M(dir->i_sb)->m_sb)) + d_invalidate(dentry); } return -error; } -- GitLab From 0ec585163ac81e329bde25fb6311a043a1c63952 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Mon, 23 Jun 2008 13:23:01 +1000 Subject: [PATCH 0147/1024] [XFS] Use the generic xattr methods. Use the generic set, get and removexattr methods and supply the s_xattr array with fine-grained handlers. All XFS/Linux highlevel attr handling is rewritten from scratch and placed into fs/xfs/linux-2.6/xfs_xattr.c so that it's separated from the generic low-level code. SGI-PV: 982343 SGI-Modid: xfs-linux-melb:xfs-kern:31234a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/Makefile | 3 +- fs/xfs/linux-2.6/xfs_iops.c | 118 ++------------- fs/xfs/linux-2.6/xfs_iops.h | 1 + fs/xfs/linux-2.6/xfs_super.c | 1 + fs/xfs/linux-2.6/xfs_super.h | 1 + fs/xfs/xfs_attr.c | 272 ----------------------------------- fs/xfs/xfs_attr.h | 17 --- 7 files changed, 18 insertions(+), 395 deletions(-) diff --git a/fs/xfs/Makefile b/fs/xfs/Makefile index 36ec614e699..737c9a42536 100644 --- a/fs/xfs/Makefile +++ b/fs/xfs/Makefile @@ -106,7 +106,8 @@ xfs-y += $(addprefix $(XFS_LINUX)/, \ xfs_iops.o \ xfs_lrw.o \ xfs_super.o \ - xfs_vnode.o) + xfs_vnode.o \ + xfs_xattr.o) # Objects in support/ xfs-y += $(addprefix support/, \ diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 190ed61bcd4..3ae80155de3 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -275,7 +275,7 @@ xfs_vn_mknod( struct xfs_inode *ip = NULL; xfs_acl_t *default_acl = NULL; struct xfs_name name; - attrexists_t test_default_acl = _ACL_DEFAULT_EXISTS; + int (*test_default_acl)(struct inode *) = _ACL_DEFAULT_EXISTS; int error; /* @@ -781,98 +781,6 @@ xfs_vn_truncate( WARN_ON(error); } -STATIC int -xfs_vn_setxattr( - struct dentry *dentry, - const char *name, - const void *data, - size_t size, - int flags) -{ - bhv_vnode_t *vp = vn_from_inode(dentry->d_inode); - char *attr = (char *)name; - attrnames_t *namesp; - int xflags = 0; - - namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT); - if (!namesp) - return -EOPNOTSUPP; - attr += namesp->attr_namelen; - - /* Convert Linux syscall to XFS internal ATTR flags */ - if (flags & XATTR_CREATE) - xflags |= ATTR_CREATE; - if (flags & XATTR_REPLACE) - xflags |= ATTR_REPLACE; - xflags |= namesp->attr_flag; - return namesp->attr_set(vp, attr, (void *)data, size, xflags); -} - -STATIC ssize_t -xfs_vn_getxattr( - struct dentry *dentry, - const char *name, - void *data, - size_t size) -{ - bhv_vnode_t *vp = vn_from_inode(dentry->d_inode); - char *attr = (char *)name; - attrnames_t *namesp; - int xflags = 0; - - namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT); - if (!namesp) - return -EOPNOTSUPP; - attr += namesp->attr_namelen; - - /* Convert Linux syscall to XFS internal ATTR flags */ - if (!size) { - xflags |= ATTR_KERNOVAL; - data = NULL; - } - xflags |= namesp->attr_flag; - return namesp->attr_get(vp, attr, (void *)data, size, xflags); -} - -STATIC ssize_t -xfs_vn_listxattr( - struct dentry *dentry, - char *data, - size_t size) -{ - bhv_vnode_t *vp = vn_from_inode(dentry->d_inode); - int error, xflags = ATTR_KERNAMELS; - ssize_t result; - - if (!size) - xflags |= ATTR_KERNOVAL; - xflags |= capable(CAP_SYS_ADMIN) ? ATTR_KERNFULLS : ATTR_KERNORMALS; - - error = attr_generic_list(vp, data, size, xflags, &result); - if (error < 0) - return error; - return result; -} - -STATIC int -xfs_vn_removexattr( - struct dentry *dentry, - const char *name) -{ - bhv_vnode_t *vp = vn_from_inode(dentry->d_inode); - char *attr = (char *)name; - attrnames_t *namesp; - int xflags = 0; - - namesp = attr_lookup_namespace(attr, attr_namespaces, ATTR_NAMECOUNT); - if (!namesp) - return -EOPNOTSUPP; - attr += namesp->attr_namelen; - - xflags |= namesp->attr_flag; - return namesp->attr_remove(vp, attr, xflags); -} - STATIC long xfs_vn_fallocate( struct inode *inode, @@ -920,10 +828,10 @@ const struct inode_operations xfs_inode_operations = { .truncate = xfs_vn_truncate, .getattr = xfs_vn_getattr, .setattr = xfs_vn_setattr, - .setxattr = xfs_vn_setxattr, - .getxattr = xfs_vn_getxattr, + .setxattr = generic_setxattr, + .getxattr = generic_getxattr, + .removexattr = generic_removexattr, .listxattr = xfs_vn_listxattr, - .removexattr = xfs_vn_removexattr, .fallocate = xfs_vn_fallocate, }; @@ -940,10 +848,10 @@ const struct inode_operations xfs_dir_inode_operations = { .permission = xfs_vn_permission, .getattr = xfs_vn_getattr, .setattr = xfs_vn_setattr, - .setxattr = xfs_vn_setxattr, - .getxattr = xfs_vn_getxattr, + .setxattr = generic_setxattr, + .getxattr = generic_getxattr, + .removexattr = generic_removexattr, .listxattr = xfs_vn_listxattr, - .removexattr = xfs_vn_removexattr, }; const struct inode_operations xfs_dir_ci_inode_operations = { @@ -959,10 +867,10 @@ const struct inode_operations xfs_dir_ci_inode_operations = { .permission = xfs_vn_permission, .getattr = xfs_vn_getattr, .setattr = xfs_vn_setattr, - .setxattr = xfs_vn_setxattr, - .getxattr = xfs_vn_getxattr, + .setxattr = generic_setxattr, + .getxattr = generic_getxattr, + .removexattr = generic_removexattr, .listxattr = xfs_vn_listxattr, - .removexattr = xfs_vn_removexattr, }; const struct inode_operations xfs_symlink_inode_operations = { @@ -972,8 +880,8 @@ const struct inode_operations xfs_symlink_inode_operations = { .permission = xfs_vn_permission, .getattr = xfs_vn_getattr, .setattr = xfs_vn_setattr, - .setxattr = xfs_vn_setxattr, - .getxattr = xfs_vn_getxattr, + .setxattr = generic_setxattr, + .getxattr = generic_getxattr, + .removexattr = generic_removexattr, .listxattr = xfs_vn_listxattr, - .removexattr = xfs_vn_removexattr, }; diff --git a/fs/xfs/linux-2.6/xfs_iops.h b/fs/xfs/linux-2.6/xfs_iops.h index 3b4df5863e4..d97ba934a2a 100644 --- a/fs/xfs/linux-2.6/xfs_iops.h +++ b/fs/xfs/linux-2.6/xfs_iops.h @@ -27,6 +27,7 @@ extern const struct file_operations xfs_file_operations; extern const struct file_operations xfs_dir_file_operations; extern const struct file_operations xfs_invis_file_operations; +extern ssize_t xfs_vn_listxattr(struct dentry *, char *data, size_t size); struct xfs_inode; extern void xfs_ichgtime(struct xfs_inode *, int); diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index cce59cc6e74..967603c4699 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1766,6 +1766,7 @@ xfs_fs_fill_super( goto out_free_mp; sb_min_blocksize(sb, BBSIZE); + sb->s_xattr = xfs_xattr_handlers; sb->s_export_op = &xfs_export_operations; sb->s_qcop = &xfs_quotactl_operations; sb->s_op = &xfs_super_operations; diff --git a/fs/xfs/linux-2.6/xfs_super.h b/fs/xfs/linux-2.6/xfs_super.h index 212bdc7a789..b7d13da01bd 100644 --- a/fs/xfs/linux-2.6/xfs_super.h +++ b/fs/xfs/linux-2.6/xfs_super.h @@ -110,6 +110,7 @@ extern void xfs_flush_device(struct xfs_inode *); extern void xfs_blkdev_issue_flush(struct xfs_buftarg *); extern const struct export_operations xfs_export_operations; +extern struct xattr_handler *xfs_xattr_handlers[]; #define XFS_M(sb) ((struct xfs_mount *)((sb)->s_fs_info)) diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index 557dad611de..9d91af4929b 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -57,11 +57,6 @@ * Provide the external interfaces to manage attribute lists. */ -#define ATTR_SYSCOUNT 2 -static struct attrnames posix_acl_access; -static struct attrnames posix_acl_default; -static struct attrnames *attr_system_names[ATTR_SYSCOUNT]; - /*======================================================================== * Function prototypes for the kernel. *========================================================================*/ @@ -2378,270 +2373,3 @@ xfs_attr_trace_enter(int type, char *where, (void *)a13, (void *)a14, (void *)a15); } #endif /* XFS_ATTR_TRACE */ - - -/*======================================================================== - * System (pseudo) namespace attribute interface routines. - *========================================================================*/ - -STATIC int -posix_acl_access_set( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - return xfs_acl_vset(vp, data, size, _ACL_TYPE_ACCESS); -} - -STATIC int -posix_acl_access_remove( - bhv_vnode_t *vp, char *name, int xflags) -{ - return xfs_acl_vremove(vp, _ACL_TYPE_ACCESS); -} - -STATIC int -posix_acl_access_get( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - return xfs_acl_vget(vp, data, size, _ACL_TYPE_ACCESS); -} - -STATIC int -posix_acl_access_exists( - bhv_vnode_t *vp) -{ - return xfs_acl_vhasacl_access(vp); -} - -STATIC int -posix_acl_default_set( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - return xfs_acl_vset(vp, data, size, _ACL_TYPE_DEFAULT); -} - -STATIC int -posix_acl_default_get( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - return xfs_acl_vget(vp, data, size, _ACL_TYPE_DEFAULT); -} - -STATIC int -posix_acl_default_remove( - bhv_vnode_t *vp, char *name, int xflags) -{ - return xfs_acl_vremove(vp, _ACL_TYPE_DEFAULT); -} - -STATIC int -posix_acl_default_exists( - bhv_vnode_t *vp) -{ - return xfs_acl_vhasacl_default(vp); -} - -static struct attrnames posix_acl_access = { - .attr_name = "posix_acl_access", - .attr_namelen = sizeof("posix_acl_access") - 1, - .attr_get = posix_acl_access_get, - .attr_set = posix_acl_access_set, - .attr_remove = posix_acl_access_remove, - .attr_exists = posix_acl_access_exists, -}; - -static struct attrnames posix_acl_default = { - .attr_name = "posix_acl_default", - .attr_namelen = sizeof("posix_acl_default") - 1, - .attr_get = posix_acl_default_get, - .attr_set = posix_acl_default_set, - .attr_remove = posix_acl_default_remove, - .attr_exists = posix_acl_default_exists, -}; - -static struct attrnames *attr_system_names[] = - { &posix_acl_access, &posix_acl_default }; - - -/*======================================================================== - * Namespace-prefix-style attribute name interface routines. - *========================================================================*/ - -STATIC int -attr_generic_set( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - return -xfs_attr_set(xfs_vtoi(vp), name, data, size, xflags); -} - -STATIC int -attr_generic_get( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - int error, asize = size; - - error = xfs_attr_get(xfs_vtoi(vp), name, data, &asize, xflags); - if (!error) - return asize; - return -error; -} - -STATIC int -attr_generic_remove( - bhv_vnode_t *vp, char *name, int xflags) -{ - return -xfs_attr_remove(xfs_vtoi(vp), name, xflags); -} - -STATIC int -attr_generic_listadd( - attrnames_t *prefix, - attrnames_t *namesp, - void *data, - size_t size, - ssize_t *result) -{ - char *p = data + *result; - - *result += prefix->attr_namelen; - *result += namesp->attr_namelen + 1; - if (!size) - return 0; - if (*result > size) - return -ERANGE; - strcpy(p, prefix->attr_name); - p += prefix->attr_namelen; - strcpy(p, namesp->attr_name); - p += namesp->attr_namelen + 1; - return 0; -} - -STATIC int -attr_system_list( - bhv_vnode_t *vp, - void *data, - size_t size, - ssize_t *result) -{ - attrnames_t *namesp; - int i, error = 0; - - for (i = 0; i < ATTR_SYSCOUNT; i++) { - namesp = attr_system_names[i]; - if (!namesp->attr_exists || !namesp->attr_exists(vp)) - continue; - error = attr_generic_listadd(&attr_system, namesp, - data, size, result); - if (error) - break; - } - return error; -} - -int -attr_generic_list( - bhv_vnode_t *vp, void *data, size_t size, int xflags, ssize_t *result) -{ - attrlist_cursor_kern_t cursor = { 0 }; - int error; - - error = xfs_attr_list(xfs_vtoi(vp), data, size, xflags, &cursor); - if (error > 0) - return -error; - *result = -error; - return attr_system_list(vp, data, size, result); -} - -attrnames_t * -attr_lookup_namespace( - char *name, - struct attrnames **names, - int nnames) -{ - int i; - - for (i = 0; i < nnames; i++) - if (!strncmp(name, names[i]->attr_name, names[i]->attr_namelen)) - return names[i]; - return NULL; -} - -STATIC int -attr_system_set( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - attrnames_t *namesp; - int error; - - if (xflags & ATTR_CREATE) - return -EINVAL; - - namesp = attr_lookup_namespace(name, attr_system_names, ATTR_SYSCOUNT); - if (!namesp) - return -EOPNOTSUPP; - error = namesp->attr_set(vp, name, data, size, xflags); - if (!error) - error = vn_revalidate(vp); - return error; -} - -STATIC int -attr_system_get( - bhv_vnode_t *vp, char *name, void *data, size_t size, int xflags) -{ - attrnames_t *namesp; - - namesp = attr_lookup_namespace(name, attr_system_names, ATTR_SYSCOUNT); - if (!namesp) - return -EOPNOTSUPP; - return namesp->attr_get(vp, name, data, size, xflags); -} - -STATIC int -attr_system_remove( - bhv_vnode_t *vp, char *name, int xflags) -{ - attrnames_t *namesp; - - namesp = attr_lookup_namespace(name, attr_system_names, ATTR_SYSCOUNT); - if (!namesp) - return -EOPNOTSUPP; - return namesp->attr_remove(vp, name, xflags); -} - -struct attrnames attr_system = { - .attr_name = "system.", - .attr_namelen = sizeof("system.") - 1, - .attr_flag = ATTR_SYSTEM, - .attr_get = attr_system_get, - .attr_set = attr_system_set, - .attr_remove = attr_system_remove, -}; - -struct attrnames attr_trusted = { - .attr_name = "trusted.", - .attr_namelen = sizeof("trusted.") - 1, - .attr_flag = ATTR_ROOT, - .attr_get = attr_generic_get, - .attr_set = attr_generic_set, - .attr_remove = attr_generic_remove, -}; - -struct attrnames attr_secure = { - .attr_name = "security.", - .attr_namelen = sizeof("security.") - 1, - .attr_flag = ATTR_SECURE, - .attr_get = attr_generic_get, - .attr_set = attr_generic_set, - .attr_remove = attr_generic_remove, -}; - -struct attrnames attr_user = { - .attr_name = "user.", - .attr_namelen = sizeof("user.") - 1, - .attr_get = attr_generic_get, - .attr_set = attr_generic_set, - .attr_remove = attr_generic_remove, -}; - -struct attrnames *attr_namespaces[] = - { &attr_system, &attr_trusted, &attr_secure, &attr_user }; diff --git a/fs/xfs/xfs_attr.h b/fs/xfs/xfs_attr.h index 9b96d171b75..c1f7d43e5ec 100644 --- a/fs/xfs/xfs_attr.h +++ b/fs/xfs/xfs_attr.h @@ -38,30 +38,14 @@ struct cred; struct xfs_attr_list_context; -typedef int (*attrset_t)(bhv_vnode_t *, char *, void *, size_t, int); -typedef int (*attrget_t)(bhv_vnode_t *, char *, void *, size_t, int); -typedef int (*attrremove_t)(bhv_vnode_t *, char *, int); -typedef int (*attrexists_t)(bhv_vnode_t *); - typedef struct attrnames { char * attr_name; unsigned int attr_namelen; - unsigned int attr_flag; - attrget_t attr_get; - attrset_t attr_set; - attrremove_t attr_remove; - attrexists_t attr_exists; } attrnames_t; -#define ATTR_NAMECOUNT 4 extern struct attrnames attr_user; extern struct attrnames attr_secure; -extern struct attrnames attr_system; extern struct attrnames attr_trusted; -extern struct attrnames *attr_namespaces[ATTR_NAMECOUNT]; - -extern attrnames_t *attr_lookup_namespace(char *, attrnames_t **, int); -extern int attr_generic_list(bhv_vnode_t *, void *, size_t, int, ssize_t *); #define ATTR_DONTFOLLOW 0x0001 /* -- unused, from IRIX -- */ #define ATTR_ROOT 0x0002 /* use attrs in root (trusted) namespace */ @@ -69,7 +53,6 @@ extern int attr_generic_list(bhv_vnode_t *, void *, size_t, int, ssize_t *); #define ATTR_SECURE 0x0008 /* use attrs in security namespace */ #define ATTR_CREATE 0x0010 /* pure create: fail if attr already exists */ #define ATTR_REPLACE 0x0020 /* pure set: fail if attr does not exist */ -#define ATTR_SYSTEM 0x0100 /* use attrs in system (pseudo) namespace */ #define ATTR_KERNACCESS 0x0400 /* [kernel] iaccess, inode held io-locked */ #define ATTR_KERNOTIME 0x1000 /* [kernel] don't update inode timestamps */ -- GitLab From ae23a5e87dbbf4657a82e1ff8ebc52ab50361c14 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 23 Jun 2008 13:23:32 +1000 Subject: [PATCH 0148/1024] [XFS] Pack some shortform dir2 structures for the ARM old ABI architecture. This should fix the longstanding issues with xfs and old ABI arm boxes, which lead to various asserts and xfs shutdowns, and for which an (incorrect) patch has been floating around for years. I've verified this patch by comparing the on-disk structure layouts using pahole from the dwarves package, as well as running through a bit of xfsqa under qemu-arm, modified so that the check/repair phase after each test actually executes check/repair from the x86 host, on the filesystem populated by the arm emulator. Thus far it all looks good. There are 2 other structures with extra padding at the end, but they don't seem to cause trouble. I suppose they could be packed as well: xfs_dir2_data_unused_t and xfs_dir2_sf_t. Note that userspace needs a similar treatment, and any filesystems which were running with the previous rogue "fix" will now see corruption (either in the kernel, or during xfs_repair) with this fix properly in place; it may be worth teaching xfs_repair to identify and fix that specific issue. SGI-PV: 982930 SGI-Modid: xfs-linux-melb:xfs-kern:31280a Signed-off-by: Eric Sandeen Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_linux.h | 7 +++++++ fs/xfs/xfs_dir2_sf.h | 6 +++--- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_linux.h b/fs/xfs/linux-2.6/xfs_linux.h index aded57321b1..4d45d9351a6 100644 --- a/fs/xfs/linux-2.6/xfs_linux.h +++ b/fs/xfs/linux-2.6/xfs_linux.h @@ -300,4 +300,11 @@ static inline __uint64_t howmany_64(__uint64_t x, __uint32_t y) return x; } +/* ARM old ABI has some weird alignment/padding */ +#if defined(__arm__) && !defined(__ARM_EABI__) +#define __arch_pack __attribute__((packed)) +#else +#define __arch_pack +#endif + #endif /* __XFS_LINUX__ */ diff --git a/fs/xfs/xfs_dir2_sf.h b/fs/xfs/xfs_dir2_sf.h index 005629d702d..deecc9d238f 100644 --- a/fs/xfs/xfs_dir2_sf.h +++ b/fs/xfs/xfs_dir2_sf.h @@ -62,7 +62,7 @@ typedef union { * Normalized offset (in a data block) of the entry, really xfs_dir2_data_off_t. * Only need 16 bits, this is the byte offset into the single block form. */ -typedef struct { __uint8_t i[2]; } xfs_dir2_sf_off_t; +typedef struct { __uint8_t i[2]; } __arch_pack xfs_dir2_sf_off_t; /* * The parent directory has a dedicated field, and the self-pointer must @@ -76,14 +76,14 @@ typedef struct xfs_dir2_sf_hdr { __uint8_t count; /* count of entries */ __uint8_t i8count; /* count of 8-byte inode #s */ xfs_dir2_inou_t parent; /* parent dir inode number */ -} xfs_dir2_sf_hdr_t; +} __arch_pack xfs_dir2_sf_hdr_t; typedef struct xfs_dir2_sf_entry { __uint8_t namelen; /* actual name length */ xfs_dir2_sf_off_t offset; /* saved offset */ __uint8_t name[1]; /* name, variable size */ xfs_dir2_inou_t inumber; /* inode number, var. offset */ -} xfs_dir2_sf_entry_t; +} __arch_pack xfs_dir2_sf_entry_t; typedef struct xfs_dir2_sf { xfs_dir2_sf_hdr_t hdr; /* shortform header */ -- GitLab From caf8aabdbc6849de772850d26d3dbe35e8f63bff Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 23 Jun 2008 13:23:41 +1000 Subject: [PATCH 0149/1024] [XFS] Factor out code for whether inode has attributes or not. SGI-PV: 983394 SGI-Modid: xfs-linux-melb:xfs-kern:31323a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_attr.c | 51 +++++++++++++++++++++-------------------------- 1 file changed, 23 insertions(+), 28 deletions(-) diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index 9d91af4929b..49fac8d6db1 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -111,6 +111,17 @@ xfs_attr_name_to_xname( return 0; } +STATIC int +xfs_inode_hasattr( + struct xfs_inode *ip) +{ + if (!XFS_IFORK_Q(ip) || + (ip->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && + ip->i_d.di_anextents == 0)) + return 0; + return 1; +} + /*======================================================================== * Overall external interface routines. *========================================================================*/ @@ -122,10 +133,8 @@ xfs_attr_fetch(xfs_inode_t *ip, struct xfs_name *name, xfs_da_args_t args; int error; - if ((XFS_IFORK_Q(ip) == 0) || - (ip->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && - ip->i_d.di_anextents == 0)) - return(ENOATTR); + if (!xfs_inode_hasattr(ip)) + return ENOATTR; /* * Fill in the arg structure for this request. @@ -143,11 +152,7 @@ xfs_attr_fetch(xfs_inode_t *ip, struct xfs_name *name, /* * Decide on what work routines to call based on the inode size. */ - if (XFS_IFORK_Q(ip) == 0 || - (ip->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && - ip->i_d.di_anextents == 0)) { - error = XFS_ERROR(ENOATTR); - } else if (ip->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) { + if (ip->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) { error = xfs_attr_shortform_getvalue(&args); } else if (xfs_bmap_one_block(ip, XFS_ATTR_FORK)) { error = xfs_attr_leaf_get(&args); @@ -523,9 +528,7 @@ xfs_attr_remove_int(xfs_inode_t *dp, struct xfs_name *name, int flags) /* * Decide on what work routines to call based on the inode size. */ - if (XFS_IFORK_Q(dp) == 0 || - (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && - dp->i_d.di_anextents == 0)) { + if (!xfs_inode_hasattr(dp)) { error = XFS_ERROR(ENOATTR); goto out; } @@ -595,11 +598,9 @@ xfs_attr_remove( return error; xfs_ilock(dp, XFS_ILOCK_SHARED); - if (XFS_IFORK_Q(dp) == 0 || - (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && - dp->i_d.di_anextents == 0)) { + if (!xfs_inode_hasattr(dp)) { xfs_iunlock(dp, XFS_ILOCK_SHARED); - return(XFS_ERROR(ENOATTR)); + return XFS_ERROR(ENOATTR); } xfs_iunlock(dp, XFS_ILOCK_SHARED); @@ -615,9 +616,7 @@ xfs_attr_list_int(xfs_attr_list_context_t *context) /* * Decide on what work routines to call based on the inode size. */ - if (XFS_IFORK_Q(dp) == 0 || - (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && - dp->i_d.di_anextents == 0)) { + if (!xfs_inode_hasattr(dp)) { error = 0; } else if (dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) { error = xfs_attr_shortform_list(context); @@ -810,12 +809,10 @@ xfs_attr_inactive(xfs_inode_t *dp) ASSERT(! XFS_NOT_DQATTACHED(mp, dp)); xfs_ilock(dp, XFS_ILOCK_SHARED); - if ((XFS_IFORK_Q(dp) == 0) || - (dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) || - (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && - dp->i_d.di_anextents == 0)) { + if (!xfs_inode_hasattr(dp) || + dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) { xfs_iunlock(dp, XFS_ILOCK_SHARED); - return(0); + return 0; } xfs_iunlock(dp, XFS_ILOCK_SHARED); @@ -848,10 +845,8 @@ xfs_attr_inactive(xfs_inode_t *dp) /* * Decide on what work routines to call based on the inode size. */ - if ((XFS_IFORK_Q(dp) == 0) || - (dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) || - (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS && - dp->i_d.di_anextents == 0)) { + if (!xfs_inode_hasattr(dp) || + dp->i_d.di_aformat == XFS_DINODE_FMT_LOCAL) { error = 0; goto out; } -- GitLab From ad9b463aa206b8c8f0bab378cf7c090c1a9a8e34 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 23 Jun 2008 13:23:48 +1000 Subject: [PATCH 0150/1024] [XFS] Switches xfs_vn_listxattr to set it's put_listent callback directly and not go through xfs_attr_list. SGI-PV: 983395 SGI-Modid: xfs-linux-melb:xfs-kern:31324a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_acl.c | 3 +- fs/xfs/xfs_attr.c | 139 +++++++++++++---------------------------- fs/xfs/xfs_attr.h | 55 ++++++++-------- fs/xfs/xfs_attr_leaf.c | 61 +++--------------- fs/xfs/xfs_attr_leaf.h | 29 +-------- 5 files changed, 84 insertions(+), 203 deletions(-) diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c index ebee3a4f703..93057af2fe3 100644 --- a/fs/xfs/xfs_acl.c +++ b/fs/xfs/xfs_acl.c @@ -341,8 +341,7 @@ xfs_acl_iaccess( /* If the file has no ACL return -1. */ rval = sizeof(xfs_acl_t); - if (xfs_attr_fetch(ip, &acl_name, (char *)acl, &rval, - ATTR_ROOT | ATTR_KERNACCESS)) { + if (xfs_attr_fetch(ip, &acl_name, (char *)acl, &rval, ATTR_ROOT)) { _ACL_FREE(acl); return -1; } diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index 49fac8d6db1..78de80e3caa 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -16,8 +16,6 @@ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include - #include "xfs.h" #include "xfs_fs.h" #include "xfs_types.h" @@ -607,12 +605,20 @@ xfs_attr_remove( return xfs_attr_remove_int(dp, &xname, flags); } -STATIC int +int xfs_attr_list_int(xfs_attr_list_context_t *context) { int error; xfs_inode_t *dp = context->dp; + XFS_STATS_INC(xs_attr_list); + + if (XFS_FORCED_SHUTDOWN(dp->i_mount)) + return EIO; + + xfs_ilock(dp, XFS_ILOCK_SHARED); + xfs_attr_trace_l_c("syscall start", context); + /* * Decide on what work routines to call based on the inode size. */ @@ -625,6 +631,10 @@ xfs_attr_list_int(xfs_attr_list_context_t *context) } else { error = xfs_attr_node_list(context); } + + xfs_iunlock(dp, XFS_ILOCK_SHARED); + xfs_attr_trace_l_c("syscall end", context); + return error; } @@ -641,74 +651,50 @@ xfs_attr_list_int(xfs_attr_list_context_t *context) */ /*ARGSUSED*/ STATIC int -xfs_attr_put_listent(xfs_attr_list_context_t *context, attrnames_t *namesp, +xfs_attr_put_listent(xfs_attr_list_context_t *context, int flags, char *name, int namelen, int valuelen, char *value) { + struct attrlist *alist = (struct attrlist *)context->alist; attrlist_ent_t *aep; int arraytop; ASSERT(!(context->flags & ATTR_KERNOVAL)); ASSERT(context->count >= 0); ASSERT(context->count < (ATTR_MAX_VALUELEN/8)); - ASSERT(context->firstu >= sizeof(*context->alist)); + ASSERT(context->firstu >= sizeof(*alist)); ASSERT(context->firstu <= context->bufsize); - arraytop = sizeof(*context->alist) + - context->count * sizeof(context->alist->al_offset[0]); + /* + * Only list entries in the right namespace. + */ + if (((context->flags & ATTR_SECURE) == 0) != + ((flags & XFS_ATTR_SECURE) == 0)) + return 0; + if (((context->flags & ATTR_ROOT) == 0) != + ((flags & XFS_ATTR_ROOT) == 0)) + return 0; + + arraytop = sizeof(*alist) + + context->count * sizeof(alist->al_offset[0]); context->firstu -= ATTR_ENTSIZE(namelen); if (context->firstu < arraytop) { xfs_attr_trace_l_c("buffer full", context); - context->alist->al_more = 1; + alist->al_more = 1; context->seen_enough = 1; return 1; } - aep = (attrlist_ent_t *)&(((char *)context->alist)[ context->firstu ]); + aep = (attrlist_ent_t *)&context->alist[context->firstu]; aep->a_valuelen = valuelen; memcpy(aep->a_name, name, namelen); - aep->a_name[ namelen ] = 0; - context->alist->al_offset[ context->count++ ] = context->firstu; - context->alist->al_count = context->count; + aep->a_name[namelen] = 0; + alist->al_offset[context->count++] = context->firstu; + alist->al_count = context->count; xfs_attr_trace_l_c("add", context); return 0; } -STATIC int -xfs_attr_kern_list(xfs_attr_list_context_t *context, attrnames_t *namesp, - char *name, int namelen, - int valuelen, char *value) -{ - char *offset; - int arraytop; - - ASSERT(context->count >= 0); - - arraytop = context->count + namesp->attr_namelen + namelen + 1; - if (arraytop > context->firstu) { - context->count = -1; /* insufficient space */ - return 1; - } - offset = (char *)context->alist + context->count; - strncpy(offset, namesp->attr_name, namesp->attr_namelen); - offset += namesp->attr_namelen; - strncpy(offset, name, namelen); /* real name */ - offset += namelen; - *offset = '\0'; - context->count += namesp->attr_namelen + namelen + 1; - return 0; -} - -/*ARGSUSED*/ -STATIC int -xfs_attr_kern_list_sizes(xfs_attr_list_context_t *context, attrnames_t *namesp, - char *name, int namelen, - int valuelen, char *value) -{ - context->count += namesp->attr_namelen + namelen + 1; - return 0; -} - /* * Generate a list of extended attribute names and optionally * also value lengths. Positive return value follows the XFS @@ -725,10 +711,9 @@ xfs_attr_list( attrlist_cursor_kern_t *cursor) { xfs_attr_list_context_t context; + struct attrlist *alist; int error; - XFS_STATS_INC(xs_attr_list); - /* * Validate the cursor. */ @@ -749,52 +734,23 @@ xfs_attr_list( /* * Initialize the output buffer. */ + memset(&context, 0, sizeof(context)); context.dp = dp; context.cursor = cursor; - context.count = 0; - context.dupcnt = 0; context.resynch = 1; context.flags = flags; - context.seen_enough = 0; - context.alist = (attrlist_t *)buffer; - context.put_value = 0; - - if (flags & ATTR_KERNAMELS) { - context.bufsize = bufsize; - context.firstu = context.bufsize; - if (flags & ATTR_KERNOVAL) - context.put_listent = xfs_attr_kern_list_sizes; - else - context.put_listent = xfs_attr_kern_list; - } else { - context.bufsize = (bufsize & ~(sizeof(int)-1)); /* align */ - context.firstu = context.bufsize; - context.alist->al_count = 0; - context.alist->al_more = 0; - context.alist->al_offset[0] = context.bufsize; - context.put_listent = xfs_attr_put_listent; - } - - if (XFS_FORCED_SHUTDOWN(dp->i_mount)) - return EIO; + context.alist = buffer; + context.bufsize = (bufsize & ~(sizeof(int)-1)); /* align */ + context.firstu = context.bufsize; + context.put_listent = xfs_attr_put_listent; - xfs_ilock(dp, XFS_ILOCK_SHARED); - xfs_attr_trace_l_c("syscall start", &context); + alist = (struct attrlist *)context.alist; + alist->al_count = 0; + alist->al_more = 0; + alist->al_offset[0] = context.bufsize; error = xfs_attr_list_int(&context); - - xfs_iunlock(dp, XFS_ILOCK_SHARED); - xfs_attr_trace_l_c("syscall end", &context); - - if (context.flags & (ATTR_KERNOVAL|ATTR_KERNAMELS)) { - /* must return negated buffer size or the error */ - if (context.count < 0) - error = XFS_ERROR(ERANGE); - else - error = -context.count; - } else - ASSERT(error >= 0); - + ASSERT(error >= 0); return error; } @@ -2357,12 +2313,7 @@ xfs_attr_trace_enter(int type, char *where, (void *)((__psunsigned_t)context->bufsize), (void *)((__psunsigned_t)context->count), (void *)((__psunsigned_t)context->firstu), - (void *)((__psunsigned_t) - (((context->count > 0) && - !(context->flags & (ATTR_KERNAMELS|ATTR_KERNOVAL))) - ? (ATTR_ENTRY(context->alist, - context->count-1)->a_valuelen) - : 0)), + NULL, (void *)((__psunsigned_t)context->dupcnt), (void *)((__psunsigned_t)context->flags), (void *)a13, (void *)a14, (void *)a15); diff --git a/fs/xfs/xfs_attr.h b/fs/xfs/xfs_attr.h index c1f7d43e5ec..41469434f41 100644 --- a/fs/xfs/xfs_attr.h +++ b/fs/xfs/xfs_attr.h @@ -18,9 +18,11 @@ #ifndef __XFS_ATTR_H__ #define __XFS_ATTR_H__ +struct xfs_inode; +struct xfs_da_args; +struct xfs_attr_list_context; + /* - * xfs_attr.h - * * Large attribute lists are structured around Btrees where all the data * elements are in the leaf nodes. Attribute names are hashed into an int, * then that int is used as the index into the Btree. Since the hashval @@ -35,17 +37,6 @@ * External interfaces *========================================================================*/ -struct cred; -struct xfs_attr_list_context; - -typedef struct attrnames { - char * attr_name; - unsigned int attr_namelen; -} attrnames_t; - -extern struct attrnames attr_user; -extern struct attrnames attr_secure; -extern struct attrnames attr_trusted; #define ATTR_DONTFOLLOW 0x0001 /* -- unused, from IRIX -- */ #define ATTR_ROOT 0x0002 /* use attrs in root (trusted) namespace */ @@ -54,14 +45,8 @@ extern struct attrnames attr_trusted; #define ATTR_CREATE 0x0010 /* pure create: fail if attr already exists */ #define ATTR_REPLACE 0x0020 /* pure set: fail if attr does not exist */ -#define ATTR_KERNACCESS 0x0400 /* [kernel] iaccess, inode held io-locked */ #define ATTR_KERNOTIME 0x1000 /* [kernel] don't update inode timestamps */ #define ATTR_KERNOVAL 0x2000 /* [kernel] get attr size only, not value */ -#define ATTR_KERNAMELS 0x4000 /* [kernel] list attr names (simple list) */ - -#define ATTR_KERNORMALS 0x0800 /* [kernel] normal attr list: user+secure */ -#define ATTR_KERNROOTLS 0x8000 /* [kernel] include root in the attr list */ -#define ATTR_KERNFULLS (ATTR_KERNORMALS|ATTR_KERNROOTLS) /* * The maximum size (into the kernel or returned from the kernel) of an @@ -129,20 +114,40 @@ typedef struct attrlist_cursor_kern { /*======================================================================== - * Function prototypes for the kernel. + * Structure used to pass context around among the routines. *========================================================================*/ -struct xfs_inode; -struct attrlist_cursor_kern; -struct xfs_da_args; + +typedef int (*put_listent_func_t)(struct xfs_attr_list_context *, int, + char *, int, int, char *); + +typedef struct xfs_attr_list_context { + struct xfs_inode *dp; /* inode */ + struct attrlist_cursor_kern *cursor; /* position in list */ + char *alist; /* output buffer */ + int seen_enough; /* T/F: seen enough of list? */ + int count; /* num used entries */ + int dupcnt; /* count dup hashvals seen */ + int bufsize; /* total buffer size */ + int firstu; /* first used byte in buffer */ + int flags; /* from VOP call */ + int resynch; /* T/F: resynch with cursor */ + int put_value; /* T/F: need value for listent */ + put_listent_func_t put_listent; /* list output fmt function */ + int index; /* index into output buffer */ +} xfs_attr_list_context_t; + + +/*======================================================================== + * Function prototypes for the kernel. + *========================================================================*/ /* * Overall external interface routines. */ int xfs_attr_inactive(struct xfs_inode *dp); - -int xfs_attr_shortform_getvalue(struct xfs_da_args *); int xfs_attr_fetch(struct xfs_inode *, struct xfs_name *, char *, int *, int); int xfs_attr_rmtval_get(struct xfs_da_args *args); +int xfs_attr_list_int(struct xfs_attr_list_context *); #endif /* __XFS_ATTR_H__ */ diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index cb345e6e485..23ef5d7c87e 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -94,13 +94,6 @@ STATIC int xfs_attr_leaf_entsize(xfs_attr_leafblock_t *leaf, int index); * Namespace helper routines *========================================================================*/ -STATIC_INLINE attrnames_t * -xfs_attr_flags_namesp(int flags) -{ - return ((flags & XFS_ATTR_SECURE) ? &attr_secure: - ((flags & XFS_ATTR_ROOT) ? &attr_trusted : &attr_user)); -} - /* * If namespace bits don't match return 0. * If all match then return 1. @@ -111,25 +104,6 @@ xfs_attr_namesp_match(int arg_flags, int ondisk_flags) return XFS_ATTR_NSP_ONDISK(ondisk_flags) == XFS_ATTR_NSP_ARGS_TO_ONDISK(arg_flags); } -/* - * If namespace bits don't match and we don't have an override for it - * then return 0. - * If all match or are overridable then return 1. - */ -STATIC_INLINE int -xfs_attr_namesp_match_overrides(int arg_flags, int ondisk_flags) -{ - if (((arg_flags & ATTR_SECURE) == 0) != - ((ondisk_flags & XFS_ATTR_SECURE) == 0) && - !(arg_flags & ATTR_KERNORMALS)) - return 0; - if (((arg_flags & ATTR_ROOT) == 0) != - ((ondisk_flags & XFS_ATTR_ROOT) == 0) && - !(arg_flags & ATTR_KERNROOTLS)) - return 0; - return 1; -} - /*======================================================================== * External routines when attribute fork size < XFS_LITINO(mp). @@ -626,15 +600,8 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) (XFS_ISRESET_CURSOR(cursor) && (dp->i_afp->if_bytes + sf->hdr.count * 16) < context->bufsize)) { for (i = 0, sfe = &sf->list[0]; i < sf->hdr.count; i++) { - attrnames_t *namesp; - - if (!xfs_attr_namesp_match_overrides(context->flags, sfe->flags)) { - sfe = XFS_ATTR_SF_NEXTENTRY(sfe); - continue; - } - namesp = xfs_attr_flags_namesp(sfe->flags); error = context->put_listent(context, - namesp, + sfe->flags, (char *)sfe->nameval, (int)sfe->namelen, (int)sfe->valuelen, @@ -681,10 +648,7 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) kmem_free(sbuf); return XFS_ERROR(EFSCORRUPTED); } - if (!xfs_attr_namesp_match_overrides(context->flags, sfe->flags)) { - sfe = XFS_ATTR_SF_NEXTENTRY(sfe); - continue; - } + sbp->entno = i; sbp->hash = xfs_da_hashname((char *)sfe->nameval, sfe->namelen); sbp->name = (char *)sfe->nameval; @@ -728,16 +692,12 @@ xfs_attr_shortform_list(xfs_attr_list_context_t *context) * Loop putting entries into the user buffer. */ for ( ; i < nsbuf; i++, sbp++) { - attrnames_t *namesp; - - namesp = xfs_attr_flags_namesp(sbp->flags); - if (cursor->hashval != sbp->hash) { cursor->hashval = sbp->hash; cursor->offset = 0; } error = context->put_listent(context, - namesp, + sbp->flags, sbp->name, sbp->namelen, sbp->valuelen, @@ -2402,8 +2362,6 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context) */ retval = 0; for ( ; (i < be16_to_cpu(leaf->hdr.count)); entry++, i++) { - attrnames_t *namesp; - if (be32_to_cpu(entry->hashval) != cursor->hashval) { cursor->hashval = be32_to_cpu(entry->hashval); cursor->offset = 0; @@ -2411,17 +2369,13 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context) if (entry->flags & XFS_ATTR_INCOMPLETE) continue; /* skip incomplete entries */ - if (!xfs_attr_namesp_match_overrides(context->flags, entry->flags)) - continue; - - namesp = xfs_attr_flags_namesp(entry->flags); if (entry->flags & XFS_ATTR_LOCAL) { xfs_attr_leaf_name_local_t *name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, i); retval = context->put_listent(context, - namesp, + entry->flags, (char *)name_loc->nameval, (int)name_loc->namelen, be16_to_cpu(name_loc->valuelen), @@ -2448,16 +2402,15 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context) if (retval) return retval; retval = context->put_listent(context, - namesp, + entry->flags, (char *)name_rmt->name, (int)name_rmt->namelen, valuelen, (char*)args.value); kmem_free(args.value); - } - else { + } else { retval = context->put_listent(context, - namesp, + entry->flags, (char *)name_rmt->name, (int)name_rmt->namelen, valuelen, diff --git a/fs/xfs/xfs_attr_leaf.h b/fs/xfs/xfs_attr_leaf.h index 040f732ce1e..5ecf437b782 100644 --- a/fs/xfs/xfs_attr_leaf.h +++ b/fs/xfs/xfs_attr_leaf.h @@ -30,7 +30,7 @@ struct attrlist; struct attrlist_cursor_kern; -struct attrnames; +struct xfs_attr_list_context; struct xfs_dabuf; struct xfs_da_args; struct xfs_da_state; @@ -204,33 +204,6 @@ static inline int xfs_attr_leaf_entsize_local_max(int bsize) return (((bsize) >> 1) + ((bsize) >> 2)); } - -/*======================================================================== - * Structure used to pass context around among the routines. - *========================================================================*/ - - -struct xfs_attr_list_context; - -typedef int (*put_listent_func_t)(struct xfs_attr_list_context *, struct attrnames *, - char *, int, int, char *); - -typedef struct xfs_attr_list_context { - struct xfs_inode *dp; /* inode */ - struct attrlist_cursor_kern *cursor; /* position in list */ - struct attrlist *alist; /* output buffer */ - int seen_enough; /* T/F: seen enough of list? */ - int count; /* num used entries */ - int dupcnt; /* count dup hashvals seen */ - int bufsize; /* total buffer size */ - int firstu; /* first used byte in buffer */ - int flags; /* from VOP call */ - int resynch; /* T/F: resynch with cursor */ - int put_value; /* T/F: need value for listent */ - put_listent_func_t put_listent; /* list output fmt function */ - int index; /* index into output buffer */ -} xfs_attr_list_context_t; - /* * Used to keep a list of "remote value" extents when unlinking an inode. */ -- GitLab From 7f871d5d1b9b126c1a0cece737a37c6980c988e3 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Mon, 23 Jun 2008 13:23:57 +1000 Subject: [PATCH 0151/1024] [XFS] make inode reclaim wait for log I/O to complete During a forced shutdown a xfs inode can be destroyed before log I/O involving that inode is complete. We need to wait for the inode to be unpinned before tearing it down. Version 2 cleans up the code a bit by relying on xfs_iflush() to do the unpinning and forced shutdown check. SGI-PV: 981240 SGI-Modid: xfs-linux-melb:xfs-kern:31326a Signed-off-by: Lachlan McIlroy Signed-off-by: David Chinner --- fs/xfs/xfs_inode.c | 2 -- fs/xfs/xfs_vnodeops.c | 30 ++++++++---------------------- 2 files changed, 8 insertions(+), 24 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 199a36ac8e2..fcb1dcc6f03 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -3082,8 +3082,6 @@ xfs_iflush( * flush lock and do nothing. */ if (xfs_inode_clean(ip)) { - ASSERT((iip != NULL) ? - !(iip->ili_item.li_flags & XFS_LI_IN_AIL) : 1); xfs_ifunlock(ip); return 0; } diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index b6a065eb25a..d76565bfcb7 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -3260,7 +3260,6 @@ xfs_finish_reclaim( { xfs_perag_t *pag = xfs_get_perag(ip->i_mount, ip->i_ino); bhv_vnode_t *vp = XFS_ITOV_NULL(ip); - int error; if (vp && VN_BAD(vp)) goto reclaim; @@ -3303,29 +3302,16 @@ xfs_finish_reclaim( xfs_iflock(ip); } - if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) { - if (ip->i_update_core || - ((ip->i_itemp != NULL) && - (ip->i_itemp->ili_format.ilf_fields != 0))) { - error = xfs_iflush(ip, sync_mode); - /* - * If we hit an error, typically because of filesystem - * shutdown, we don't need to let vn_reclaim to know - * because we're gonna reclaim the inode anyway. - */ - if (error) { - xfs_iunlock(ip, XFS_ILOCK_EXCL); - goto reclaim; - } - xfs_iflock(ip); /* synchronize with xfs_iflush_done */ - } - - ASSERT(ip->i_update_core == 0); - ASSERT(ip->i_itemp == NULL || - ip->i_itemp->ili_format.ilf_fields == 0); + /* + * In the case of a forced shutdown we rely on xfs_iflush() to + * wait for the inode to be unpinned before returning an error. + */ + if (xfs_iflush(ip, sync_mode) == 0) { + /* synchronize with xfs_iflush_done */ + xfs_iflock(ip); + xfs_ifunlock(ip); } - xfs_ifunlock(ip); xfs_iunlock(ip, XFS_ILOCK_EXCL); reclaim: -- GitLab From 6278debdf95b100a516b803f90d6f11b41c34171 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Mon, 23 Jun 2008 13:25:02 +1000 Subject: [PATCH 0152/1024] [XFS] fix extent corruption in xfs_iext_irec_compact_full() This function is used to compact the indirect extent list by moving extents from one page to the previous to fill them up. After we move some extents to an earlier page we need to shuffle the remaining extents to the start of the page. The actual bug here is the second argument to memmove() needs to index past the extents, that were copied to the previous page, and move the remaining extents. For pages that are already full (ie ext_avail == 0) the compaction code has no net effect so don't do it. SGI-PV: 983337 SGI-Modid: xfs-linux-melb:xfs-kern:31332a Signed-off-by: Lachlan McIlroy Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_inode.c | 70 +++++++++++++++++++++++++++++++--------------- 1 file changed, 47 insertions(+), 23 deletions(-) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index fcb1dcc6f03..bedc6616317 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -4532,39 +4532,63 @@ xfs_iext_irec_compact_full( int nlists; /* number of irec's (ex lists) */ ASSERT(ifp->if_flags & XFS_IFEXTIREC); + nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; erp = ifp->if_u1.if_ext_irec; ep = &erp->er_extbuf[erp->er_extcount]; erp_next = erp + 1; ep_next = erp_next->er_extbuf; + while (erp_idx < nlists - 1) { + /* + * Check how many extent records are available in this irec. + * If there is none skip the whole exercise. + */ ext_avail = XFS_LINEAR_EXTS - erp->er_extcount; - ext_diff = MIN(ext_avail, erp_next->er_extcount); - memcpy(ep, ep_next, ext_diff * sizeof(xfs_bmbt_rec_t)); - erp->er_extcount += ext_diff; - erp_next->er_extcount -= ext_diff; - /* Remove next page */ - if (erp_next->er_extcount == 0) { + if (ext_avail) { + /* - * Free page before removing extent record - * so er_extoffs don't get modified in - * xfs_iext_irec_remove. + * Copy over as many as possible extent records into + * the previous page. */ - kmem_free(erp_next->er_extbuf); - erp_next->er_extbuf = NULL; - xfs_iext_irec_remove(ifp, erp_idx + 1); - erp = &ifp->if_u1.if_ext_irec[erp_idx]; - nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; - /* Update next page */ - } else { - /* Move rest of page up to become next new page */ - memmove(erp_next->er_extbuf, ep_next, - erp_next->er_extcount * sizeof(xfs_bmbt_rec_t)); - ep_next = erp_next->er_extbuf; - memset(&ep_next[erp_next->er_extcount], 0, - (XFS_LINEAR_EXTS - erp_next->er_extcount) * - sizeof(xfs_bmbt_rec_t)); + ext_diff = MIN(ext_avail, erp_next->er_extcount); + memcpy(ep, ep_next, ext_diff * sizeof(xfs_bmbt_rec_t)); + erp->er_extcount += ext_diff; + erp_next->er_extcount -= ext_diff; + + /* + * If the next irec is empty now we can simply + * remove it. + */ + if (erp_next->er_extcount == 0) { + /* + * Free page before removing extent record + * so er_extoffs don't get modified in + * xfs_iext_irec_remove. + */ + kmem_free(erp_next->er_extbuf); + erp_next->er_extbuf = NULL; + xfs_iext_irec_remove(ifp, erp_idx + 1); + erp = &ifp->if_u1.if_ext_irec[erp_idx]; + nlists = ifp->if_real_bytes / XFS_IEXT_BUFSZ; + + /* + * If the next irec is not empty move up the content + * that has not been copied to the previous page to + * the beggining of this one. + */ + } else { + memmove(erp_next->er_extbuf, &ep_next[ext_diff], + erp_next->er_extcount * + sizeof(xfs_bmbt_rec_t)); + ep_next = erp_next->er_extbuf; + memset(&ep_next[erp_next->er_extcount], 0, + (XFS_LINEAR_EXTS - + erp_next->er_extcount) * + sizeof(xfs_bmbt_rec_t)); + } } + if (erp->er_extcount == XFS_LINEAR_EXTS) { erp_idx++; if (erp_idx < nlists) -- GitLab From 61f10fad1947116055c694321d9d8f21152c0582 Mon Sep 17 00:00:00 2001 From: Tim Shimmin Date: Mon, 23 Jun 2008 13:25:09 +1000 Subject: [PATCH 0153/1024] [XFS] Fix up warning for xfs_vn_listxatt's call of list_one_attr() with context count of ssize_t versus int. Change context count to be ssize_t. SGI-PV: 983395 SGI-Modid: xfs-linux-melb:xfs-kern:31333a Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_attr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_attr.h b/fs/xfs/xfs_attr.h index 41469434f41..3115dcc6723 100644 --- a/fs/xfs/xfs_attr.h +++ b/fs/xfs/xfs_attr.h @@ -126,7 +126,7 @@ typedef struct xfs_attr_list_context { struct attrlist_cursor_kern *cursor; /* position in list */ char *alist; /* output buffer */ int seen_enough; /* T/F: seen enough of list? */ - int count; /* num used entries */ + ssize_t count; /* num used entries */ int dupcnt; /* count dup hashvals seen */ int bufsize; /* total buffer size */ int firstu; /* first used byte in buffer */ -- GitLab From 8f112e3bc3508afc8d1612868d178359446c08fd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 23 Jun 2008 13:25:17 +1000 Subject: [PATCH 0154/1024] [XFS] Merge xfs_rmdir into xfs_remove xfs_remove and xfs_rmdir are almost the same with a little more work performed in xfs_rmdir due to the . and .. entries. This patch merges xfs_rmdir into xfs_remove and performs these actions conditionally. Also clean up the error handling which was a nightmare in both versions before. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31335a Signed-off-by: Christoph Hellwig Signed-off-by: Barry Naujok Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_iops.c | 54 ++---- fs/xfs/xfs_vnodeops.c | 324 ++++++++++-------------------------- fs/xfs/xfs_vnodeops.h | 2 - 3 files changed, 102 insertions(+), 278 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 3ae80155de3..1f89c19cd4c 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -245,8 +245,7 @@ STATIC void xfs_cleanup_inode( struct inode *dir, struct inode *inode, - struct dentry *dentry, - int mode) + struct dentry *dentry) { struct xfs_name teardown; @@ -257,10 +256,7 @@ xfs_cleanup_inode( */ xfs_dentry_to_name(&teardown, dentry); - if (S_ISDIR(mode)) - xfs_rmdir(XFS_I(dir), &teardown, XFS_I(inode)); - else - xfs_remove(XFS_I(dir), &teardown, XFS_I(inode)); + xfs_remove(XFS_I(dir), &teardown, XFS_I(inode)); iput(inode); } @@ -342,7 +338,7 @@ xfs_vn_mknod( return -error; out_cleanup_inode: - xfs_cleanup_inode(dir, inode, dentry, mode); + xfs_cleanup_inode(dir, inode, dentry); out_free_acl: if (default_acl) _ACL_FREE(default_acl); @@ -518,37 +514,11 @@ xfs_vn_symlink( return 0; out_cleanup_inode: - xfs_cleanup_inode(dir, inode, dentry, 0); + xfs_cleanup_inode(dir, inode, dentry); out: return -error; } -STATIC int -xfs_vn_rmdir( - struct inode *dir, - struct dentry *dentry) -{ - struct inode *inode = dentry->d_inode; - struct xfs_name name; - int error; - - xfs_dentry_to_name(&name, dentry); - - error = xfs_rmdir(XFS_I(dir), &name, XFS_I(inode)); - if (likely(!error)) { - xfs_validate_fields(inode); - xfs_validate_fields(dir); - /* - * With rmdir, the VFS makes the dentry "negative": no inode, - * but still hashed. This is incompatible with case-insensitive - * mode, so invalidate (unhash) the dentry in CI-mode. - */ - if (xfs_sb_version_hasasciici(&XFS_M(dir->i_sb)->m_sb)) - d_invalidate(dentry); - } - return -error; -} - STATIC int xfs_vn_rename( struct inode *odir, @@ -842,7 +812,13 @@ const struct inode_operations xfs_dir_inode_operations = { .unlink = xfs_vn_unlink, .symlink = xfs_vn_symlink, .mkdir = xfs_vn_mkdir, - .rmdir = xfs_vn_rmdir, + /* + * Yes, XFS uses the same method for rmdir and unlink. + * + * There are some subtile differences deeper in the code, + * but we use S_ISDIR to check for those. + */ + .rmdir = xfs_vn_unlink, .mknod = xfs_vn_mknod, .rename = xfs_vn_rename, .permission = xfs_vn_permission, @@ -861,7 +837,13 @@ const struct inode_operations xfs_dir_ci_inode_operations = { .unlink = xfs_vn_unlink, .symlink = xfs_vn_symlink, .mkdir = xfs_vn_mkdir, - .rmdir = xfs_vn_rmdir, + /* + * Yes, XFS uses the same method for rmdir and unlink. + * + * There are some subtile differences deeper in the code, + * but we use S_ISDIR to check for those. + */ + .rmdir = xfs_vn_unlink, .mknod = xfs_vn_mknod, .rename = xfs_vn_rename, .permission = xfs_vn_permission, diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index d76565bfcb7..8297a8c5af9 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -2116,13 +2116,6 @@ again: #endif } -#ifdef DEBUG -#define REMOVE_DEBUG_TRACE(x) {remove_which_error_return = (x);} -int remove_which_error_return = 0; -#else /* ! DEBUG */ -#define REMOVE_DEBUG_TRACE(x) -#endif /* ! DEBUG */ - int xfs_remove( xfs_inode_t *dp, @@ -2131,6 +2124,7 @@ xfs_remove( { xfs_mount_t *mp = dp->i_mount; xfs_trans_t *tp = NULL; + int is_dir = S_ISDIR(ip->i_d.di_mode); int error = 0; xfs_bmap_free_t free_list; xfs_fsblock_t first_block; @@ -2138,8 +2132,10 @@ xfs_remove( int committed; int link_zero; uint resblks; + uint log_count; xfs_itrace_entry(dp); + xfs_itrace_entry(ip); if (XFS_FORCED_SHUTDOWN(mp)) return XFS_ERROR(EIO); @@ -2152,19 +2148,23 @@ xfs_remove( return error; } - xfs_itrace_entry(ip); - xfs_itrace_ref(ip); - error = XFS_QM_DQATTACH(mp, dp, 0); - if (!error) - error = XFS_QM_DQATTACH(mp, ip, 0); - if (error) { - REMOVE_DEBUG_TRACE(__LINE__); + if (error) + goto std_return; + + error = XFS_QM_DQATTACH(mp, ip, 0); + if (error) goto std_return; - } - tp = xfs_trans_alloc(mp, XFS_TRANS_REMOVE); + if (is_dir) { + tp = xfs_trans_alloc(mp, XFS_TRANS_RMDIR); + log_count = XFS_DEFAULT_LOG_COUNT; + } else { + tp = xfs_trans_alloc(mp, XFS_TRANS_REMOVE); + log_count = XFS_REMOVE_LOG_COUNT; + } cancel_flags = XFS_TRANS_RELEASE_LOG_RES; + /* * We try to get the real space reservation first, * allowing for directory btree deletion(s) implying @@ -2176,25 +2176,21 @@ xfs_remove( */ resblks = XFS_REMOVE_SPACE_RES(mp); error = xfs_trans_reserve(tp, resblks, XFS_REMOVE_LOG_RES(mp), 0, - XFS_TRANS_PERM_LOG_RES, XFS_REMOVE_LOG_COUNT); + XFS_TRANS_PERM_LOG_RES, log_count); if (error == ENOSPC) { resblks = 0; error = xfs_trans_reserve(tp, 0, XFS_REMOVE_LOG_RES(mp), 0, - XFS_TRANS_PERM_LOG_RES, XFS_REMOVE_LOG_COUNT); + XFS_TRANS_PERM_LOG_RES, log_count); } if (error) { ASSERT(error != ENOSPC); - REMOVE_DEBUG_TRACE(__LINE__); - xfs_trans_cancel(tp, 0); - return error; + cancel_flags = 0; + goto out_trans_cancel; } error = xfs_lock_dir_and_entry(dp, ip); - if (error) { - REMOVE_DEBUG_TRACE(__LINE__); - xfs_trans_cancel(tp, cancel_flags); - goto std_return; - } + if (error) + goto out_trans_cancel; /* * At this point, we've gotten both the directory and the entry @@ -2206,6 +2202,21 @@ xfs_remove( IHOLD(dp); xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); + /* + * If we're removing a directory perform some additional validation. + */ + if (is_dir) { + ASSERT(ip->i_d.di_nlink >= 2); + if (ip->i_d.di_nlink != 2) { + error = XFS_ERROR(ENOTEMPTY); + goto out_trans_cancel; + } + if (!xfs_dir_isempty(ip)) { + error = XFS_ERROR(ENOTEMPTY); + goto out_trans_cancel; + } + } + /* * Entry must exist since we did a lookup in xfs_lock_dir_and_entry. */ @@ -2214,39 +2225,64 @@ xfs_remove( &first_block, &free_list, resblks); if (error) { ASSERT(error != ENOENT); - REMOVE_DEBUG_TRACE(__LINE__); - goto error1; + goto out_bmap_cancel; } xfs_ichgtime(dp, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG); + /* + * Bump the in memory generation count on the parent + * directory so that other can know that it has changed. + */ dp->i_gen++; xfs_trans_log_inode(tp, dp, XFS_ILOG_CORE); - error = xfs_droplink(tp, ip); - if (error) { - REMOVE_DEBUG_TRACE(__LINE__); - goto error1; + if (is_dir) { + /* + * Drop the link from ip's "..". + */ + error = xfs_droplink(tp, dp); + if (error) + goto out_bmap_cancel; + + /* + * Drop the link from dp to ip. + */ + error = xfs_droplink(tp, ip); + if (error) + goto out_bmap_cancel; + } else { + /* + * When removing a non-directory we need to log the parent + * inode here for the i_gen update. For a directory this is + * done implicitly by the xfs_droplink call for the ".." entry. + */ + xfs_trans_log_inode(tp, dp, XFS_ILOG_CORE); } - /* Determine if this is the last link while + /* + * Drop the "." link from ip to self. + */ + error = xfs_droplink(tp, ip); + if (error) + goto out_bmap_cancel; + + /* + * Determine if this is the last link while * we are in the transaction. */ - link_zero = (ip)->i_d.di_nlink==0; + link_zero = (ip->i_d.di_nlink == 0); /* * If this is a synchronous mount, make sure that the * remove transaction goes to disk before returning to * the user. */ - if (mp->m_flags & (XFS_MOUNT_WSYNC|XFS_MOUNT_DIRSYNC)) { + if (mp->m_flags & (XFS_MOUNT_WSYNC|XFS_MOUNT_DIRSYNC)) xfs_trans_set_sync(tp); - } error = xfs_bmap_finish(&tp, &free_list, &committed); - if (error) { - REMOVE_DEBUG_TRACE(__LINE__); - goto error_rele; - } + if (error) + goto out_bmap_cancel; error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES); if (error) @@ -2258,38 +2294,26 @@ xfs_remove( * will get killed on last close in xfs_close() so we don't * have to worry about that. */ - if (link_zero && xfs_inode_is_filestream(ip)) + if (!is_dir && link_zero && xfs_inode_is_filestream(ip)) xfs_filestream_deassociate(ip); xfs_itrace_exit(ip); + xfs_itrace_exit(dp); -/* Fall through to std_return with error = 0 */ std_return: if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTREMOVE)) { - (void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE, - dp, DM_RIGHT_NULL, - NULL, DM_RIGHT_NULL, - name->name, NULL, ip->i_d.di_mode, error, 0); + XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE, dp, DM_RIGHT_NULL, + NULL, DM_RIGHT_NULL, name->name, NULL, + ip->i_d.di_mode, error, 0); } - return error; - error1: - xfs_bmap_cancel(&free_list); - cancel_flags |= XFS_TRANS_ABORT; - xfs_trans_cancel(tp, cancel_flags); - goto std_return; + return error; - error_rele: - /* - * In this case make sure to not release the inode until after - * the current transaction is aborted. Releasing it beforehand - * can cause us to go to xfs_inactive and start a recursive - * transaction which can easily deadlock with the current one. - */ + out_bmap_cancel: xfs_bmap_cancel(&free_list); cancel_flags |= XFS_TRANS_ABORT; + out_trans_cancel: xfs_trans_cancel(tp, cancel_flags); - goto std_return; } @@ -2655,186 +2679,6 @@ std_return: goto std_return; } -int -xfs_rmdir( - xfs_inode_t *dp, - struct xfs_name *name, - xfs_inode_t *cdp) -{ - xfs_mount_t *mp = dp->i_mount; - xfs_trans_t *tp; - int error; - xfs_bmap_free_t free_list; - xfs_fsblock_t first_block; - int cancel_flags; - int committed; - int last_cdp_link; - uint resblks; - - xfs_itrace_entry(dp); - - if (XFS_FORCED_SHUTDOWN(mp)) - return XFS_ERROR(EIO); - - if (DM_EVENT_ENABLED(dp, DM_EVENT_REMOVE)) { - error = XFS_SEND_NAMESP(mp, DM_EVENT_REMOVE, - dp, DM_RIGHT_NULL, - NULL, DM_RIGHT_NULL, name->name, - NULL, cdp->i_d.di_mode, 0, 0); - if (error) - return XFS_ERROR(error); - } - - /* - * Get the dquots for the inodes. - */ - error = XFS_QM_DQATTACH(mp, dp, 0); - if (!error) - error = XFS_QM_DQATTACH(mp, cdp, 0); - if (error) { - REMOVE_DEBUG_TRACE(__LINE__); - goto std_return; - } - - tp = xfs_trans_alloc(mp, XFS_TRANS_RMDIR); - cancel_flags = XFS_TRANS_RELEASE_LOG_RES; - /* - * We try to get the real space reservation first, - * allowing for directory btree deletion(s) implying - * possible bmap insert(s). If we can't get the space - * reservation then we use 0 instead, and avoid the bmap - * btree insert(s) in the directory code by, if the bmap - * insert tries to happen, instead trimming the LAST - * block from the directory. - */ - resblks = XFS_REMOVE_SPACE_RES(mp); - error = xfs_trans_reserve(tp, resblks, XFS_REMOVE_LOG_RES(mp), 0, - XFS_TRANS_PERM_LOG_RES, XFS_DEFAULT_LOG_COUNT); - if (error == ENOSPC) { - resblks = 0; - error = xfs_trans_reserve(tp, 0, XFS_REMOVE_LOG_RES(mp), 0, - XFS_TRANS_PERM_LOG_RES, XFS_DEFAULT_LOG_COUNT); - } - if (error) { - ASSERT(error != ENOSPC); - cancel_flags = 0; - goto error_return; - } - XFS_BMAP_INIT(&free_list, &first_block); - - /* - * Now lock the child directory inode and the parent directory - * inode in the proper order. This will take care of validating - * that the directory entry for the child directory inode has - * not changed while we were obtaining a log reservation. - */ - error = xfs_lock_dir_and_entry(dp, cdp); - if (error) { - xfs_trans_cancel(tp, cancel_flags); - goto std_return; - } - - IHOLD(dp); - xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL); - - IHOLD(cdp); - xfs_trans_ijoin(tp, cdp, XFS_ILOCK_EXCL); - - ASSERT(cdp->i_d.di_nlink >= 2); - if (cdp->i_d.di_nlink != 2) { - error = XFS_ERROR(ENOTEMPTY); - goto error_return; - } - if (!xfs_dir_isempty(cdp)) { - error = XFS_ERROR(ENOTEMPTY); - goto error_return; - } - - error = xfs_dir_removename(tp, dp, name, cdp->i_ino, - &first_block, &free_list, resblks); - if (error) - goto error1; - - xfs_ichgtime(dp, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG); - - /* - * Bump the in memory generation count on the parent - * directory so that other can know that it has changed. - */ - dp->i_gen++; - - /* - * Drop the link from cdp's "..". - */ - error = xfs_droplink(tp, dp); - if (error) { - goto error1; - } - - /* - * Drop the link from dp to cdp. - */ - error = xfs_droplink(tp, cdp); - if (error) { - goto error1; - } - - /* - * Drop the "." link from cdp to self. - */ - error = xfs_droplink(tp, cdp); - if (error) { - goto error1; - } - - /* Determine these before committing transaction */ - last_cdp_link = (cdp)->i_d.di_nlink==0; - - /* - * If this is a synchronous mount, make sure that the - * rmdir transaction goes to disk before returning to - * the user. - */ - if (mp->m_flags & (XFS_MOUNT_WSYNC|XFS_MOUNT_DIRSYNC)) { - xfs_trans_set_sync(tp); - } - - error = xfs_bmap_finish (&tp, &free_list, &committed); - if (error) { - xfs_bmap_cancel(&free_list); - xfs_trans_cancel(tp, (XFS_TRANS_RELEASE_LOG_RES | - XFS_TRANS_ABORT)); - goto std_return; - } - - error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES); - if (error) { - goto std_return; - } - - - /* Fall through to std_return with error = 0 or the errno - * from xfs_trans_commit. */ - std_return: - if (DM_EVENT_ENABLED(dp, DM_EVENT_POSTREMOVE)) { - (void) XFS_SEND_NAMESP(mp, DM_EVENT_POSTREMOVE, - dp, DM_RIGHT_NULL, - NULL, DM_RIGHT_NULL, - name->name, NULL, cdp->i_d.di_mode, - error, 0); - } - return error; - - error1: - xfs_bmap_cancel(&free_list); - cancel_flags |= XFS_TRANS_ABORT; - /* FALLTHROUGH */ - - error_return: - xfs_trans_cancel(tp, cancel_flags); - goto std_return; -} - int xfs_symlink( xfs_inode_t *dp, diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h index 7e9a8b241f2..454fa9a3e52 100644 --- a/fs/xfs/xfs_vnodeops.h +++ b/fs/xfs/xfs_vnodeops.h @@ -31,8 +31,6 @@ int xfs_link(struct xfs_inode *tdp, struct xfs_inode *sip, struct xfs_name *target_name); int xfs_mkdir(struct xfs_inode *dp, struct xfs_name *dir_name, mode_t mode, struct xfs_inode **ipp, struct cred *credp); -int xfs_rmdir(struct xfs_inode *dp, struct xfs_name *name, - struct xfs_inode *cdp); int xfs_readdir(struct xfs_inode *dp, void *dirent, size_t bufsize, xfs_off_t *offset, filldir_t filldir); int xfs_symlink(struct xfs_inode *dp, struct xfs_name *link_name, -- GitLab From e5700704b2b0853c059e424284cceeff3032ea28 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 23 Jun 2008 13:25:25 +1000 Subject: [PATCH 0155/1024] [XFS] Don't update i_size for directories and special files The core kernel uses vfs_getattr to look at the inode size and similar attributes, so there is no need to keep i_size uptodate for directories or special files. This means we can remove xfs_validate_fields because the I/O path already keeps i_size uptodate for regular files. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31336a Signed-off-by: Christoph Hellwig Signed-off-by: Barry Naujok Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_iops.c | 61 ++++++++----------------------------- 1 file changed, 13 insertions(+), 48 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 1f89c19cd4c..7b42569968f 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -181,23 +181,6 @@ xfs_ichgtime_fast( mark_inode_dirty_sync(inode); } - -/* - * Pull the link count and size up from the xfs inode to the linux inode - */ -STATIC void -xfs_validate_fields( - struct inode *inode) -{ - struct xfs_inode *ip = XFS_I(inode); - loff_t size; - - /* we're under i_sem so i_size can't change under us */ - size = XFS_ISIZE(ip); - if (i_size_read(inode) != size) - i_size_write(inode, size); -} - /* * Hook in SELinux. This is not quite correct yet, what we really need * here (as we do for default ACLs) is a mechanism by which creation of @@ -331,10 +314,7 @@ xfs_vn_mknod( } - if (S_ISDIR(mode)) - xfs_validate_fields(inode); d_instantiate(dentry, inode); - xfs_validate_fields(dir); return -error; out_cleanup_inode: @@ -450,7 +430,6 @@ xfs_vn_link( } xfs_iflags_set(XFS_I(dir), XFS_IMODIFIED); - xfs_validate_fields(inode); d_instantiate(dentry, inode); return 0; } @@ -460,26 +439,23 @@ xfs_vn_unlink( struct inode *dir, struct dentry *dentry) { - struct inode *inode; struct xfs_name name; int error; - inode = dentry->d_inode; xfs_dentry_to_name(&name, dentry); - error = xfs_remove(XFS_I(dir), &name, XFS_I(inode)); - if (likely(!error)) { - xfs_validate_fields(dir); /* size needs update */ - xfs_validate_fields(inode); - /* - * With unlink, the VFS makes the dentry "negative": no inode, - * but still hashed. This is incompatible with case-insensitive - * mode, so invalidate (unhash) the dentry in CI-mode. - */ - if (xfs_sb_version_hasasciici(&XFS_M(dir->i_sb)->m_sb)) - d_invalidate(dentry); - } - return -error; + error = -xfs_remove(XFS_I(dir), &name, XFS_I(dentry->d_inode)); + if (error) + return error; + + /* + * With unlink, the VFS makes the dentry "negative": no inode, + * but still hashed. This is incompatible with case-insensitive + * mode, so invalidate (unhash) the dentry in CI-mode. + */ + if (xfs_sb_version_hasasciici(&XFS_M(dir->i_sb)->m_sb)) + d_invalidate(dentry); + return 0; } STATIC int @@ -509,8 +485,6 @@ xfs_vn_symlink( goto out_cleanup_inode; d_instantiate(dentry, inode); - xfs_validate_fields(dir); - xfs_validate_fields(inode); return 0; out_cleanup_inode: @@ -529,22 +503,13 @@ xfs_vn_rename( struct inode *new_inode = ndentry->d_inode; struct xfs_name oname; struct xfs_name nname; - int error; xfs_dentry_to_name(&oname, odentry); xfs_dentry_to_name(&nname, ndentry); - error = xfs_rename(XFS_I(odir), &oname, XFS_I(odentry->d_inode), + return -xfs_rename(XFS_I(odir), &oname, XFS_I(odentry->d_inode), XFS_I(ndir), &nname, new_inode ? XFS_I(new_inode) : NULL); - if (likely(!error)) { - if (new_inode) - xfs_validate_fields(new_inode); - xfs_validate_fields(odir); - if (ndir != odir) - xfs_validate_fields(ndir); - } - return -error; } /* -- GitLab From 90bb7ab077a63facbe3aa0b9e3763a0cb956a4c1 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Mon, 23 Jun 2008 13:25:38 +1000 Subject: [PATCH 0156/1024] [XFS] Fix returning case-preserved name with CI node form directories xfs_dir2_node_lookup() calls xfs_da_node_lookup_int() which iterates through leaf blocks containing the matching hash value for the name being looked up. Inside xfs_da_node_lookup_int(), it calls the xfs_dir2_leafn_lookup_for_entry() for each leaf block. xfs_dir2_leafn_lookup_for_entry() iterates through each matching hash/offset pair doing a name comparison to find the matching dirent. For CI mode, the state->extrablk retains the details of the block that has the CI match so xfs_dir2_node_lookup() can return the case-preserved name. The original implementation didn't retain the xfs_da_buf_t properly, so the lookup was returning a bogus name to be stored in the dentry. In the case of unlink, the bad name was passed and in debug mode, ASSERTed when it can't find the entry. SGI-PV: 983284 SGI-Modid: xfs-linux-melb:xfs-kern:31337a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_dir2_node.c | 69 ++++++++++++++++++++++++++---------------- 1 file changed, 43 insertions(+), 26 deletions(-) diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c index 1b543022346..fa6c3a5ddbc 100644 --- a/fs/xfs/xfs_dir2_node.c +++ b/fs/xfs/xfs_dir2_node.c @@ -549,7 +549,6 @@ xfs_dir2_leafn_lookup_for_entry( xfs_dir2_data_entry_t *dep; /* data block entry */ xfs_inode_t *dp; /* incore directory inode */ int error; /* error return value */ - int di = -1; /* data entry index */ int index; /* leaf entry index */ xfs_dir2_leaf_t *leaf; /* leaf structure */ xfs_dir2_leaf_entry_t *lep; /* leaf entry */ @@ -577,7 +576,6 @@ xfs_dir2_leafn_lookup_for_entry( if (state->extravalid) { curbp = state->extrablk.bp; curdb = state->extrablk.blkno; - di = state->extrablk.index; } /* * Loop over leaf entries with the right hash value. @@ -602,17 +600,27 @@ xfs_dir2_leafn_lookup_for_entry( */ if (newdb != curdb) { /* - * If we had a block before, drop it. + * If we had a block before that we aren't saving + * for a CI name, drop it */ - if (curbp) + if (curbp && (args->cmpresult == XFS_CMP_DIFFERENT || + curdb != state->extrablk.blkno)) xfs_da_brelse(tp, curbp); /* - * Read the data block. + * If needing the block that is saved with a CI match, + * use it otherwise read in the new data block. */ - error = xfs_da_read_buf(tp, dp, xfs_dir2_db_to_da(mp, - newdb), -1, &curbp, XFS_DATA_FORK); - if (error) - return error; + if (args->cmpresult != XFS_CMP_DIFFERENT && + newdb == state->extrablk.blkno) { + ASSERT(state->extravalid); + curbp = state->extrablk.bp; + } else { + error = xfs_da_read_buf(tp, dp, + xfs_dir2_db_to_da(mp, newdb), + -1, &curbp, XFS_DATA_FORK); + if (error) + return error; + } xfs_dir2_data_check(dp, curbp); curdb = newdb; } @@ -624,38 +632,47 @@ xfs_dir2_leafn_lookup_for_entry( /* * Compare the entry and if it's an exact match, return * EEXIST immediately. If it's the first case-insensitive - * match, store the inode number and continue looking. + * match, store the block & inode number and continue looking. */ cmp = mp->m_dirnameops->compname(args, dep->name, dep->namelen); if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) { + /* If there is a CI match block, drop it */ + if (args->cmpresult != XFS_CMP_DIFFERENT && + curdb != state->extrablk.blkno) + xfs_da_brelse(tp, state->extrablk.bp); args->cmpresult = cmp; args->inumber = be64_to_cpu(dep->inumber); - di = (int)((char *)dep - (char *)curbp->data); - error = EEXIST; + *indexp = index; + state->extravalid = 1; + state->extrablk.bp = curbp; + state->extrablk.blkno = curdb; + state->extrablk.index = (int)((char *)dep - + (char *)curbp->data); + state->extrablk.magic = XFS_DIR2_DATA_MAGIC; if (cmp == XFS_CMP_EXACT) - goto out; + return XFS_ERROR(EEXIST); } } - /* Didn't find an exact match. */ - error = ENOENT; ASSERT(index == be16_to_cpu(leaf->hdr.count) || (args->op_flags & XFS_DA_OP_OKNOENT)); -out: if (curbp) { - /* Giving back a data block. */ - state->extravalid = 1; - state->extrablk.bp = curbp; - state->extrablk.index = di; - state->extrablk.blkno = curdb; - state->extrablk.magic = XFS_DIR2_DATA_MAGIC; + if (args->cmpresult == XFS_CMP_DIFFERENT) { + /* Giving back last used data block. */ + state->extravalid = 1; + state->extrablk.bp = curbp; + state->extrablk.index = -1; + state->extrablk.blkno = curdb; + state->extrablk.magic = XFS_DIR2_DATA_MAGIC; + } else { + /* If the curbp is not the CI match block, drop it */ + if (state->extrablk.bp != curbp) + xfs_da_brelse(tp, curbp); + } } else { state->extravalid = 0; } - /* - * Return the index, that will be the deletion point for remove/replace. - */ *indexp = index; - return XFS_ERROR(error); + return XFS_ERROR(ENOENT); } /* -- GitLab From 6bd8fc8a55cba263bab0b1c24786e95c5a2dc720 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Mon, 23 Jun 2008 13:25:46 +1000 Subject: [PATCH 0157/1024] [XFS] Convert ASSERTs to XFS_WANT_CORRUPTED_GOTOs ASSERTs are no good to us on a non-debug build so use XFS_WANT_CORRUPTED_GOTOs to report extent btree corruption ASAP. SGI-PV: 983500 SGI-Modid: xfs-linux-melb:xfs-kern:31338a Signed-off-by: Lachlan McIlroy Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_bmap.c | 101 +++++++++++++++++++++++----------------------- 1 file changed, 51 insertions(+), 50 deletions(-) diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index a612a90aae4..c21e01a9b2d 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -428,7 +428,8 @@ xfs_bmap_add_attrfork_btree( cur->bc_private.b.firstblock = *firstblock; if ((error = xfs_bmbt_lookup_ge(cur, 0, 0, 0, &stat))) goto error0; - ASSERT(stat == 1); /* must be at least one entry */ + /* must be at least one entry */ + XFS_WANT_CORRUPTED_GOTO(stat == 1, error0); if ((error = xfs_bmbt_newroot(cur, flags, &stat))) goto error0; if (stat == 0) { @@ -816,13 +817,13 @@ xfs_bmap_add_extent_delay_real( RIGHT.br_startblock, RIGHT.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_delete(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_decrement(cur, 0, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, LEFT.br_startoff, LEFT.br_startblock, LEFT.br_blockcount + @@ -860,7 +861,7 @@ xfs_bmap_add_extent_delay_real( LEFT.br_startblock, LEFT.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, LEFT.br_startoff, LEFT.br_startblock, LEFT.br_blockcount + @@ -895,7 +896,7 @@ xfs_bmap_add_extent_delay_real( RIGHT.br_startblock, RIGHT.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, PREV.br_startoff, new->br_startblock, PREV.br_blockcount + @@ -928,11 +929,11 @@ xfs_bmap_add_extent_delay_real( new->br_startblock, new->br_blockcount, &i))) goto done; - ASSERT(i == 0); + XFS_WANT_CORRUPTED_GOTO(i == 0, done); cur->bc_rec.b.br_state = XFS_EXT_NORM; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } *dnew = 0; /* DELTA: The in-core extent described by new changed type. */ @@ -963,7 +964,7 @@ xfs_bmap_add_extent_delay_real( LEFT.br_startblock, LEFT.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, LEFT.br_startoff, LEFT.br_startblock, LEFT.br_blockcount + @@ -1004,11 +1005,11 @@ xfs_bmap_add_extent_delay_real( new->br_startblock, new->br_blockcount, &i))) goto done; - ASSERT(i == 0); + XFS_WANT_CORRUPTED_GOTO(i == 0, done); cur->bc_rec.b.br_state = XFS_EXT_NORM; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS && ip->i_d.di_nextents > ip->i_df.if_ext_max) { @@ -1054,7 +1055,7 @@ xfs_bmap_add_extent_delay_real( RIGHT.br_startblock, RIGHT.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, new->br_startoff, new->br_startblock, new->br_blockcount + @@ -1094,11 +1095,11 @@ xfs_bmap_add_extent_delay_real( new->br_startblock, new->br_blockcount, &i))) goto done; - ASSERT(i == 0); + XFS_WANT_CORRUPTED_GOTO(i == 0, done); cur->bc_rec.b.br_state = XFS_EXT_NORM; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS && ip->i_d.di_nextents > ip->i_df.if_ext_max) { @@ -1149,11 +1150,11 @@ xfs_bmap_add_extent_delay_real( new->br_startblock, new->br_blockcount, &i))) goto done; - ASSERT(i == 0); + XFS_WANT_CORRUPTED_GOTO(i == 0, done); cur->bc_rec.b.br_state = XFS_EXT_NORM; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS && ip->i_d.di_nextents > ip->i_df.if_ext_max) { @@ -1377,19 +1378,19 @@ xfs_bmap_add_extent_unwritten_real( RIGHT.br_startblock, RIGHT.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_delete(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_decrement(cur, 0, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_delete(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_decrement(cur, 0, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, LEFT.br_startoff, LEFT.br_startblock, LEFT.br_blockcount + PREV.br_blockcount + @@ -1426,13 +1427,13 @@ xfs_bmap_add_extent_unwritten_real( PREV.br_startblock, PREV.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_delete(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_decrement(cur, 0, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, LEFT.br_startoff, LEFT.br_startblock, LEFT.br_blockcount + PREV.br_blockcount, @@ -1469,13 +1470,13 @@ xfs_bmap_add_extent_unwritten_real( RIGHT.br_startblock, RIGHT.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_delete(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_decrement(cur, 0, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, new->br_startoff, new->br_startblock, new->br_blockcount + RIGHT.br_blockcount, @@ -1508,7 +1509,7 @@ xfs_bmap_add_extent_unwritten_real( new->br_startblock, new->br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, new->br_startoff, new->br_startblock, new->br_blockcount, newext))) @@ -1549,7 +1550,7 @@ xfs_bmap_add_extent_unwritten_real( PREV.br_startblock, PREV.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, PREV.br_startoff + new->br_blockcount, PREV.br_startblock + new->br_blockcount, @@ -1596,7 +1597,7 @@ xfs_bmap_add_extent_unwritten_real( PREV.br_startblock, PREV.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, PREV.br_startoff + new->br_blockcount, PREV.br_startblock + new->br_blockcount, @@ -1606,7 +1607,7 @@ xfs_bmap_add_extent_unwritten_real( cur->bc_rec.b = *new; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } /* DELTA: One in-core extent is split in two. */ temp = PREV.br_startoff; @@ -1640,7 +1641,7 @@ xfs_bmap_add_extent_unwritten_real( PREV.br_startblock, PREV.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, PREV.br_startoff, PREV.br_startblock, PREV.br_blockcount - new->br_blockcount, @@ -1682,7 +1683,7 @@ xfs_bmap_add_extent_unwritten_real( PREV.br_startblock, PREV.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, PREV.br_startoff, PREV.br_startblock, PREV.br_blockcount - new->br_blockcount, @@ -1692,11 +1693,11 @@ xfs_bmap_add_extent_unwritten_real( new->br_startblock, new->br_blockcount, &i))) goto done; - ASSERT(i == 0); + XFS_WANT_CORRUPTED_GOTO(i == 0, done); cur->bc_rec.b.br_state = XFS_EXT_NORM; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } /* DELTA: One in-core extent is split in two. */ temp = PREV.br_startoff; @@ -1732,7 +1733,7 @@ xfs_bmap_add_extent_unwritten_real( PREV.br_startblock, PREV.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); /* new right extent - oldext */ if ((error = xfs_bmbt_update(cur, r[1].br_startoff, r[1].br_startblock, r[1].br_blockcount, @@ -1744,15 +1745,15 @@ xfs_bmap_add_extent_unwritten_real( cur->bc_rec.b = PREV; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_increment(cur, 0, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); /* new middle extent - newext */ cur->bc_rec.b = *new; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } /* DELTA: One in-core extent is split in three. */ temp = PREV.br_startoff; @@ -2097,13 +2098,13 @@ xfs_bmap_add_extent_hole_real( right.br_startblock, right.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_delete(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_decrement(cur, 0, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, left.br_startoff, left.br_startblock, left.br_blockcount + @@ -2139,7 +2140,7 @@ xfs_bmap_add_extent_hole_real( left.br_startblock, left.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, left.br_startoff, left.br_startblock, left.br_blockcount + @@ -2174,7 +2175,7 @@ xfs_bmap_add_extent_hole_real( right.br_startblock, right.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); if ((error = xfs_bmbt_update(cur, new->br_startoff, new->br_startblock, new->br_blockcount + @@ -2208,11 +2209,11 @@ xfs_bmap_add_extent_hole_real( new->br_startblock, new->br_blockcount, &i))) goto done; - ASSERT(i == 0); + XFS_WANT_CORRUPTED_GOTO(i == 0, done); cur->bc_rec.b.br_state = new->br_state; if ((error = xfs_bmbt_insert(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } /* DELTA: A new extent was added in a hole. */ temp = new->br_startoff; @@ -3131,7 +3132,7 @@ xfs_bmap_del_extent( got.br_startblock, got.br_blockcount, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } da_old = da_new = 0; } else { @@ -3164,7 +3165,7 @@ xfs_bmap_del_extent( } if ((error = xfs_bmbt_delete(cur, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); break; case 2: @@ -3268,7 +3269,7 @@ xfs_bmap_del_extent( got.br_startblock, temp, &i))) goto done; - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); /* * Update the btree record back * to the original value. @@ -3289,7 +3290,7 @@ xfs_bmap_del_extent( error = XFS_ERROR(ENOSPC); goto done; } - ASSERT(i == 1); + XFS_WANT_CORRUPTED_GOTO(i == 1, done); } else flags |= XFS_ILOG_FEXT(whichfork); XFS_IFORK_NEXT_SET(ip, whichfork, -- GitLab From ddea2d5246b4ffbe49bbfb700aa3dbe717eb0915 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Mon, 23 Jun 2008 13:25:53 +1000 Subject: [PATCH 0158/1024] [XFS] Always reset btree cursor after an insert After a btree insert operation a cursor can be invalid due to block splits and a maybe a new root block. We reset the cursor in xfs_bmbt_insert() in the cases where we think we need to but it isn't enough as we still see assertions. Just do what we do elsewhere and reset the cursor unconditionally. Also remove the fix to revalidate the original cursor in xfs_bmbt_insert(). SGI-PV: 983336 SGI-Modid: xfs-linux-melb:xfs-kern:31342a Signed-off-by: Lachlan McIlroy Signed-off-by: David Chinner --- fs/xfs/xfs_bmap.c | 13 ++++++++++--- fs/xfs/xfs_bmap_btree.c | 38 ++++---------------------------------- 2 files changed, 14 insertions(+), 37 deletions(-) diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index c21e01a9b2d..cf4dee01983 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -1746,11 +1746,18 @@ xfs_bmap_add_extent_unwritten_real( if ((error = xfs_bmbt_insert(cur, &i))) goto done; XFS_WANT_CORRUPTED_GOTO(i == 1, done); - if ((error = xfs_bmbt_increment(cur, 0, &i))) + /* + * Reset the cursor to the position of the new extent + * we are about to insert as we can't trust it after + * the previous insert. + */ + if ((error = xfs_bmbt_lookup_eq(cur, new->br_startoff, + new->br_startblock, new->br_blockcount, + &i))) goto done; - XFS_WANT_CORRUPTED_GOTO(i == 1, done); + XFS_WANT_CORRUPTED_GOTO(i == 0, done); /* new middle extent - newext */ - cur->bc_rec.b = *new; + cur->bc_rec.b.br_state = new->br_state; if ((error = xfs_bmbt_insert(cur, &i))) goto done; XFS_WANT_CORRUPTED_GOTO(i == 1, done); diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c index 4f0e849d973..4aa2f11ba56 100644 --- a/fs/xfs/xfs_bmap_btree.c +++ b/fs/xfs/xfs_bmap_btree.c @@ -2029,22 +2029,8 @@ xfs_bmbt_increment( * Insert the current record at the point referenced by cur. * * A multi-level split of the tree on insert will invalidate the original - * cursor. It appears, however, that some callers assume that the cursor is - * always valid. Hence if we do a multi-level split we need to revalidate the - * cursor. - * - * When a split occurs, we will see a new cursor returned. Use that as a - * trigger to determine if we need to revalidate the original cursor. If we get - * a split, then use the original irec to lookup up the path of the record we - * just inserted. - * - * Note that the fact that the btree root is in the inode means that we can - * have the level of the tree change without a "split" occurring at the root - * level. What happens is that the root is migrated to an allocated block and - * the inode root is pointed to it. This means a single split can change the - * level of the tree (level 2 -> level 3) and invalidate the old cursor. Hence - * the level change should be accounted as a split so as to correctly trigger a - * revalidation of the old cursor. + * cursor. All callers of this function should assume that the cursor is + * no longer valid and revalidate it. */ int /* error */ xfs_bmbt_insert( @@ -2057,14 +2043,11 @@ xfs_bmbt_insert( xfs_fsblock_t nbno; xfs_btree_cur_t *ncur; xfs_bmbt_rec_t nrec; - xfs_bmbt_irec_t oirec; /* original irec */ xfs_btree_cur_t *pcur; - int splits = 0; XFS_BMBT_TRACE_CURSOR(cur, ENTRY); level = 0; nbno = NULLFSBLOCK; - oirec = cur->bc_rec.b; xfs_bmbt_disk_set_all(&nrec, &cur->bc_rec.b); ncur = NULL; pcur = cur; @@ -2073,13 +2056,11 @@ xfs_bmbt_insert( &i))) { if (pcur != cur) xfs_btree_del_cursor(pcur, XFS_BTREE_ERROR); - goto error0; + XFS_BMBT_TRACE_CURSOR(cur, ERROR); + return error; } XFS_WANT_CORRUPTED_GOTO(i == 1, error0); if (pcur != cur && (ncur || nbno == NULLFSBLOCK)) { - /* allocating a new root is effectively a split */ - if (cur->bc_nlevels != pcur->bc_nlevels) - splits++; cur->bc_nlevels = pcur->bc_nlevels; cur->bc_private.b.allocated += pcur->bc_private.b.allocated; @@ -2093,21 +2074,10 @@ xfs_bmbt_insert( xfs_btree_del_cursor(pcur, XFS_BTREE_NOERROR); } if (ncur) { - splits++; pcur = ncur; ncur = NULL; } } while (nbno != NULLFSBLOCK); - - if (splits > 1) { - /* revalidate the old cursor as we had a multi-level split */ - error = xfs_bmbt_lookup_eq(cur, oirec.br_startoff, - oirec.br_startblock, oirec.br_blockcount, &i); - if (error) - goto error0; - ASSERT(i == 1); - } - XFS_BMBT_TRACE_CURSOR(cur, EXIT); *stat = i; return 0; -- GitLab From f9e09f095f323948b26ba09638d2eb3b0578d094 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Mon, 23 Jun 2008 13:34:09 +1000 Subject: [PATCH 0159/1024] [XFS] Use the generic xattr methods. Add missing file fs/xfs/linux-2.6/xfs_xattr.c SGI-PV: 982343 SGI-Modid: xfs-linux-melb:xfs-kern:31234a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_xattr.c | 333 +++++++++++++++++++++++++++++++++++ 1 file changed, 333 insertions(+) create mode 100644 fs/xfs/linux-2.6/xfs_xattr.c diff --git a/fs/xfs/linux-2.6/xfs_xattr.c b/fs/xfs/linux-2.6/xfs_xattr.c new file mode 100644 index 00000000000..b4acb68fc9f --- /dev/null +++ b/fs/xfs/linux-2.6/xfs_xattr.c @@ -0,0 +1,333 @@ +/* + * Copyright (C) 2008 Christoph Hellwig. + * Portions Copyright (C) 2000-2008 Silicon Graphics, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write the Free Software Foundation, + * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include "xfs.h" +#include "xfs_da_btree.h" +#include "xfs_bmap_btree.h" +#include "xfs_inode.h" +#include "xfs_attr.h" +#include "xfs_attr_leaf.h" +#include "xfs_acl.h" +#include "xfs_vnodeops.h" + +#include +#include + + +/* + * ACL handling. Should eventually be moved into xfs_acl.c + */ + +static int +xfs_decode_acl(const char *name) +{ + if (strcmp(name, "posix_acl_access") == 0) + return _ACL_TYPE_ACCESS; + else if (strcmp(name, "posix_acl_default") == 0) + return _ACL_TYPE_DEFAULT; + return -EINVAL; +} + +/* + * Get system extended attributes which at the moment only + * includes Posix ACLs. + */ +static int +xfs_xattr_system_get(struct inode *inode, const char *name, + void *buffer, size_t size) +{ + int acl; + + acl = xfs_decode_acl(name); + if (acl < 0) + return acl; + + return xfs_acl_vget(inode, buffer, size, acl); +} + +static int +xfs_xattr_system_set(struct inode *inode, const char *name, + const void *value, size_t size, int flags) +{ + int error, acl; + + acl = xfs_decode_acl(name); + if (acl < 0) + return acl; + if (flags & XATTR_CREATE) + return -EINVAL; + + if (!value) + return xfs_acl_vremove(inode, acl); + + error = xfs_acl_vset(inode, (void *)value, size, acl); + if (!error) + vn_revalidate(inode); + return error; +} + +static struct xattr_handler xfs_xattr_system_handler = { + .prefix = XATTR_SYSTEM_PREFIX, + .get = xfs_xattr_system_get, + .set = xfs_xattr_system_set, +}; + + +/* + * Real xattr handling. The only difference between the namespaces is + * a flag passed to the low-level attr code. + */ + +static int +__xfs_xattr_get(struct inode *inode, const char *name, + void *value, size_t size, int xflags) +{ + struct xfs_inode *ip = XFS_I(inode); + int error, asize = size; + + if (strcmp(name, "") == 0) + return -EINVAL; + + /* Convert Linux syscall to XFS internal ATTR flags */ + if (!size) { + xflags |= ATTR_KERNOVAL; + value = NULL; + } + + error = -xfs_attr_get(ip, name, value, &asize, xflags); + if (error) + return error; + return asize; +} + +static int +__xfs_xattr_set(struct inode *inode, const char *name, const void *value, + size_t size, int flags, int xflags) +{ + struct xfs_inode *ip = XFS_I(inode); + + if (strcmp(name, "") == 0) + return -EINVAL; + + /* Convert Linux syscall to XFS internal ATTR flags */ + if (flags & XATTR_CREATE) + xflags |= ATTR_CREATE; + if (flags & XATTR_REPLACE) + xflags |= ATTR_REPLACE; + + if (!value) + return -xfs_attr_remove(ip, name, xflags); + return -xfs_attr_set(ip, name, (void *)value, size, xflags); +} + +static int +xfs_xattr_user_get(struct inode *inode, const char *name, + void *value, size_t size) +{ + return __xfs_xattr_get(inode, name, value, size, 0); +} + +static int +xfs_xattr_user_set(struct inode *inode, const char *name, + const void *value, size_t size, int flags) +{ + return __xfs_xattr_set(inode, name, value, size, flags, 0); +} + +static struct xattr_handler xfs_xattr_user_handler = { + .prefix = XATTR_USER_PREFIX, + .get = xfs_xattr_user_get, + .set = xfs_xattr_user_set, +}; + + +static int +xfs_xattr_trusted_get(struct inode *inode, const char *name, + void *value, size_t size) +{ + return __xfs_xattr_get(inode, name, value, size, ATTR_ROOT); +} + +static int +xfs_xattr_trusted_set(struct inode *inode, const char *name, + const void *value, size_t size, int flags) +{ + return __xfs_xattr_set(inode, name, value, size, flags, ATTR_ROOT); +} + +static struct xattr_handler xfs_xattr_trusted_handler = { + .prefix = XATTR_TRUSTED_PREFIX, + .get = xfs_xattr_trusted_get, + .set = xfs_xattr_trusted_set, +}; + + +static int +xfs_xattr_secure_get(struct inode *inode, const char *name, + void *value, size_t size) +{ + return __xfs_xattr_get(inode, name, value, size, ATTR_SECURE); +} + +static int +xfs_xattr_secure_set(struct inode *inode, const char *name, + const void *value, size_t size, int flags) +{ + return __xfs_xattr_set(inode, name, value, size, flags, ATTR_SECURE); +} + +static struct xattr_handler xfs_xattr_security_handler = { + .prefix = XATTR_SECURITY_PREFIX, + .get = xfs_xattr_secure_get, + .set = xfs_xattr_secure_set, +}; + + +struct xattr_handler *xfs_xattr_handlers[] = { + &xfs_xattr_user_handler, + &xfs_xattr_trusted_handler, + &xfs_xattr_security_handler, + &xfs_xattr_system_handler, + NULL +}; + +static unsigned int xfs_xattr_prefix_len(int flags) +{ + if (flags & XFS_ATTR_SECURE) + return sizeof("security"); + else if (flags & XFS_ATTR_ROOT) + return sizeof("trusted"); + else + return sizeof("user"); +} + +static const char *xfs_xattr_prefix(int flags) +{ + if (flags & XFS_ATTR_SECURE) + return xfs_xattr_security_handler.prefix; + else if (flags & XFS_ATTR_ROOT) + return xfs_xattr_trusted_handler.prefix; + else + return xfs_xattr_user_handler.prefix; +} + +static int +xfs_xattr_put_listent(struct xfs_attr_list_context *context, int flags, + char *name, int namelen, int valuelen, char *value) +{ + unsigned int prefix_len = xfs_xattr_prefix_len(flags); + char *offset; + int arraytop; + + ASSERT(context->count >= 0); + + /* + * Only show root namespace entries if we are actually allowed to + * see them. + */ + if ((flags & XFS_ATTR_ROOT) && !capable(CAP_SYS_ADMIN)) + return 0; + + arraytop = context->count + prefix_len + namelen + 1; + if (arraytop > context->firstu) { + context->count = -1; /* insufficient space */ + return 1; + } + offset = (char *)context->alist + context->count; + strncpy(offset, xfs_xattr_prefix(flags), prefix_len); + offset += prefix_len; + strncpy(offset, name, namelen); /* real name */ + offset += namelen; + *offset = '\0'; + context->count += prefix_len + namelen + 1; + return 0; +} + +static int +xfs_xattr_put_listent_sizes(struct xfs_attr_list_context *context, int flags, + char *name, int namelen, int valuelen, char *value) +{ + context->count += xfs_xattr_prefix_len(flags) + namelen + 1; + return 0; +} + +static int +list_one_attr(const char *name, const size_t len, void *data, + size_t size, ssize_t *result) +{ + char *p = data + *result; + + *result += len; + if (!size) + return 0; + if (*result > size) + return -ERANGE; + + strcpy(p, name); + return 0; +} + +ssize_t +xfs_vn_listxattr(struct dentry *dentry, char *data, size_t size) +{ + struct xfs_attr_list_context context; + struct attrlist_cursor_kern cursor = { 0 }; + struct inode *inode = dentry->d_inode; + int error; + + /* + * First read the regular on-disk attributes. + */ + memset(&context, 0, sizeof(context)); + context.dp = XFS_I(inode); + context.cursor = &cursor; + context.resynch = 1; + context.alist = data; + context.bufsize = size; + context.firstu = context.bufsize; + + if (size) + context.put_listent = xfs_xattr_put_listent; + else + context.put_listent = xfs_xattr_put_listent_sizes; + + xfs_attr_list_int(&context); + if (context.count < 0) + return -ERANGE; + + /* + * Then add the two synthetic ACL attributes. + */ + if (xfs_acl_vhasacl_access(inode)) { + error = list_one_attr(POSIX_ACL_XATTR_ACCESS, + strlen(POSIX_ACL_XATTR_ACCESS) + 1, + data, size, &context.count); + if (error) + return error; + } + + if (xfs_acl_vhasacl_default(inode)) { + error = list_one_attr(POSIX_ACL_XATTR_DEFAULT, + strlen(POSIX_ACL_XATTR_DEFAULT) + 1, + data, size, &context.count); + if (error) + return error; + } + + return context.count; +} -- GitLab From 07fe4dd48d046feeff8705a2a224a8fba050b1c6 Mon Sep 17 00:00:00 2001 From: Barry Naujok Date: Fri, 27 Jun 2008 13:32:11 +1000 Subject: [PATCH 0160/1024] [XFS] Fix CI lookup in leaf-form directories Instead of comparing buffer pointers, compare buffer block numbers and don't keep buff SGI-PV: 983564 SGI-Modid: xfs-linux-melb:xfs-kern:31346a Signed-off-by: Barry Naujok Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_dir2_leaf.c | 49 +++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 24 deletions(-) diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c index f110242d6df..93535992cb6 100644 --- a/fs/xfs/xfs_dir2_leaf.c +++ b/fs/xfs/xfs_dir2_leaf.c @@ -1321,8 +1321,8 @@ xfs_dir2_leaf_lookup_int( int *indexp, /* out: index in leaf block */ xfs_dabuf_t **dbpp) /* out: data buffer */ { - xfs_dir2_db_t curdb; /* current data block number */ - xfs_dabuf_t *dbp; /* data buffer */ + xfs_dir2_db_t curdb = -1; /* current data block number */ + xfs_dabuf_t *dbp = NULL; /* data buffer */ xfs_dir2_data_entry_t *dep; /* data entry */ xfs_inode_t *dp; /* incore directory inode */ int error; /* error return code */ @@ -1333,7 +1333,7 @@ xfs_dir2_leaf_lookup_int( xfs_mount_t *mp; /* filesystem mount point */ xfs_dir2_db_t newdb; /* new data block number */ xfs_trans_t *tp; /* transaction pointer */ - xfs_dabuf_t *cbp; /* case match data buffer */ + xfs_dir2_db_t cidb = -1; /* case match data block no. */ enum xfs_dacmp cmp; /* name compare result */ dp = args->dp; @@ -1342,11 +1342,10 @@ xfs_dir2_leaf_lookup_int( /* * Read the leaf block into the buffer. */ - if ((error = - xfs_da_read_buf(tp, dp, mp->m_dirleafblk, -1, &lbp, - XFS_DATA_FORK))) { + error = xfs_da_read_buf(tp, dp, mp->m_dirleafblk, -1, &lbp, + XFS_DATA_FORK); + if (error) return error; - } *lbpp = lbp; leaf = lbp->data; xfs_dir2_leaf_check(dp, lbp); @@ -1358,9 +1357,7 @@ xfs_dir2_leaf_lookup_int( * Loop over all the entries with the right hash value * looking to match the name. */ - cbp = NULL; - for (lep = &leaf->ents[index], dbp = NULL, curdb = -1; - index < be16_to_cpu(leaf->hdr.count) && + for (lep = &leaf->ents[index]; index < be16_to_cpu(leaf->hdr.count) && be32_to_cpu(lep->hashval) == args->hashval; lep++, index++) { /* @@ -1377,7 +1374,7 @@ xfs_dir2_leaf_lookup_int( * need to pitch the old one and read the new one. */ if (newdb != curdb) { - if (dbp != cbp) + if (dbp) xfs_da_brelse(tp, dbp); error = xfs_da_read_buf(tp, dp, xfs_dir2_db_to_da(mp, newdb), @@ -1403,35 +1400,39 @@ xfs_dir2_leaf_lookup_int( if (cmp != XFS_CMP_DIFFERENT && cmp != args->cmpresult) { args->cmpresult = cmp; *indexp = index; - /* - * case exact match: release the stored CI buffer if it - * exists and return the current buffer. - */ + /* case exact match: return the current buffer. */ if (cmp == XFS_CMP_EXACT) { - if (cbp && cbp != dbp) - xfs_da_brelse(tp, cbp); *dbpp = dbp; return 0; } - cbp = dbp; + cidb = curdb; } } ASSERT(args->op_flags & XFS_DA_OP_OKNOENT); /* - * Here, we can only be doing a lookup (not a rename or replace). - * If a case-insensitive match was found earlier, release the current - * buffer and return the stored CI matching buffer. + * Here, we can only be doing a lookup (not a rename or remove). + * If a case-insensitive match was found earlier, re-read the + * appropriate data block if required and return it. */ if (args->cmpresult == XFS_CMP_CASE) { - if (cbp != dbp) + ASSERT(cidb != -1); + if (cidb != curdb) { xfs_da_brelse(tp, dbp); - *dbpp = cbp; + error = xfs_da_read_buf(tp, dp, + xfs_dir2_db_to_da(mp, cidb), + -1, &dbp, XFS_DATA_FORK); + if (error) { + xfs_da_brelse(tp, lbp); + return error; + } + } + *dbpp = dbp; return 0; } /* * No match found, return ENOENT. */ - ASSERT(cbp == NULL); + ASSERT(cidb == -1); if (dbp) xfs_da_brelse(tp, dbp); xfs_da_brelse(tp, lbp); -- GitLab From 90ad58a83accbeb8de09de4a55d3e6b429767eae Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 27 Jun 2008 13:32:19 +1000 Subject: [PATCH 0161/1024] [XFS] Check for invalid flags in xfs_attrlist_by_handle. xfs_attrlist_by_handle should only take the ATTR_ flags for the root namespaces. The ATTR_KERN* flags may change at anytime and expect special preconditions that can't be guaranteed for userspace-originating requests. For example passing down ATTR_KERNNOVAL through xfs_attrlist_by_handle will hit an assert in debug builds currently. SGI-PV: 983677 SGI-Modid: xfs-linux-melb:xfs-kern:31351a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_ioctl.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index 01939ba2d8d..993f5720200 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -468,6 +468,12 @@ xfs_attrlist_by_handle( if (al_hreq.buflen > XATTR_LIST_MAX) return -XFS_ERROR(EINVAL); + /* + * Reject flags, only allow namespaces. + */ + if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE)) + return -XFS_ERROR(EINVAL); + error = xfs_vget_fsop_handlereq(mp, parinode, &al_hreq.hreq, &inode); if (error) goto out; -- GitLab From e182f57ac019b034b40d16f3c6d8e86826aecd56 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 27 Jun 2008 13:32:31 +1000 Subject: [PATCH 0162/1024] [XFS] attrmulti cleanup xfs_attrmulti_by_handle currently request the size based on sizeof(attr_multiop_t) but should be using sizeof(xfs_attr_multiop_t) because that is what it is dealing with. Despite beeing wrong this actually harmless in practice because both structures are the same size on all platforms. But this sizeof was the only user of struct attr_multiop so we can just kill it. Also move the ATTR_OP_* defines xfs_attr.h into the struct xfs_attr_multiop defintion in xfs_fs.h because they are only used with that structure, and are part of the user ABI for the XFS_IOC_ATTRMULTI_BY_HANDLE ioctl. SGI-PV: 983508 SGI-Modid: xfs-linux-melb:xfs-kern:31352a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_ioctl.c | 2 +- fs/xfs/xfs_attr.h | 16 ---------------- fs/xfs/xfs_fs.h | 3 +++ 3 files changed, 4 insertions(+), 17 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index 993f5720200..8eddaff3684 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -593,7 +593,7 @@ xfs_attrmulti_by_handle( goto out; error = E2BIG; - size = am_hreq.opcount * sizeof(attr_multiop_t); + size = am_hreq.opcount * sizeof(xfs_attr_multiop_t); if (!size || size > 16 * PAGE_SIZE) goto out_vn_rele; diff --git a/fs/xfs/xfs_attr.h b/fs/xfs/xfs_attr.h index 3115dcc6723..8b2d31c19e4 100644 --- a/fs/xfs/xfs_attr.h +++ b/fs/xfs/xfs_attr.h @@ -84,22 +84,6 @@ typedef struct attrlist_ent { /* data from attr_list() */ ((attrlist_ent_t *) \ &((char *)buffer)[ ((attrlist_t *)(buffer))->al_offset[index] ]) -/* - * Multi-attribute operation vector. - */ -typedef struct attr_multiop { - int am_opcode; /* operation to perform (ATTR_OP_GET, etc.) */ - int am_error; /* [out arg] result of this sub-op (an errno) */ - char *am_attrname; /* attribute name to work with */ - char *am_attrvalue; /* [in/out arg] attribute value (raw bytes) */ - int am_length; /* [in/out arg] length of value */ - int am_flags; /* bitwise OR of attr API flags defined above */ -} attr_multiop_t; - -#define ATTR_OP_GET 1 /* return the indicated attr's value */ -#define ATTR_OP_SET 2 /* set/create the indicated attr/value pair */ -#define ATTR_OP_REMOVE 3 /* remove the indicated attr */ - /* * Kernel-internal version of the attrlist cursor. */ diff --git a/fs/xfs/xfs_fs.h b/fs/xfs/xfs_fs.h index 6ca749897c5..01c0cc88d3f 100644 --- a/fs/xfs/xfs_fs.h +++ b/fs/xfs/xfs_fs.h @@ -372,6 +372,9 @@ typedef struct xfs_fsop_attrlist_handlereq { typedef struct xfs_attr_multiop { __u32 am_opcode; +#define ATTR_OP_GET 1 /* return the indicated attr's value */ +#define ATTR_OP_SET 2 /* set/create the indicated attr/value pair */ +#define ATTR_OP_REMOVE 3 /* remove the indicated attr */ __s32 am_error; void __user *am_attrname; void __user *am_attrvalue; -- GitLab From 4ddd8bb1d25f9cbb345e1f64a56c0f641a787ede Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 27 Jun 2008 13:32:53 +1000 Subject: [PATCH 0163/1024] [XFS] use minleft when allocating in xfs_bmbt_split() The bmap btree split code relies on a previous data extent allocation (from xfs_bmap_btalloc()) to find an AG that has sufficient space to perform a full btree split, when inserting the extent. When converting unwritten extents we don't allocate a data extent so a btree split will be the first allocation. In this case we need to set minleft so the allocator will pick an AG that has space to complete the split(s). SGI-PV: 983338 SGI-Modid: xfs-linux-melb:xfs-kern:31357a Signed-off-by: Lachlan McIlroy Signed-off-by: David Chinner --- fs/xfs/xfs_bmap_btree.c | 15 ++++++++++++++- fs/xfs/xfs_iomap.c | 10 ++++++++++ 2 files changed, 24 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c index 4aa2f11ba56..3fc09cd8d51 100644 --- a/fs/xfs/xfs_bmap_btree.c +++ b/fs/xfs/xfs_bmap_btree.c @@ -1493,12 +1493,25 @@ xfs_bmbt_split( left = XFS_BUF_TO_BMBT_BLOCK(lbp); args.fsbno = cur->bc_private.b.firstblock; args.firstblock = args.fsbno; + args.minleft = 0; if (args.fsbno == NULLFSBLOCK) { args.fsbno = lbno; args.type = XFS_ALLOCTYPE_START_BNO; + /* + * Make sure there is sufficient room left in the AG to + * complete a full tree split for an extent insert. If + * we are converting the middle part of an extent then + * we may need space for two tree splits. + * + * We are relying on the caller to make the correct block + * reservation for this operation to succeed. If the + * reservation amount is insufficient then we may fail a + * block allocation here and corrupt the filesystem. + */ + args.minleft = xfs_trans_get_block_res(args.tp); } else args.type = XFS_ALLOCTYPE_NEAR_BNO; - args.mod = args.minleft = args.alignment = args.total = args.isfl = + args.mod = args.alignment = args.total = args.isfl = args.userdata = args.minalignslop = 0; args.minlen = args.maxlen = args.prod = 1; args.wasdel = cur->bc_private.b.flags & XFS_BTCUR_BPRV_WASDEL; diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 7edcde691d1..67f22b2b44b 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -889,6 +889,16 @@ xfs_iomap_write_unwritten( count_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)offset + count); count_fsb = (xfs_filblks_t)(count_fsb - offset_fsb); + /* + * Reserve enough blocks in this transaction for two complete extent + * btree splits. We may be converting the middle part of an unwritten + * extent and in this case we will insert two new extents in the btree + * each of which could cause a full split. + * + * This reservation amount will be used in the first call to + * xfs_bmbt_split() to select an AG with enough space to satisfy the + * rest of the operation. + */ resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0) << 1; do { -- GitLab From b877e3d37dda0154868a3c78f02f38a1ec14ce79 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 27 Jun 2008 13:33:03 +1000 Subject: [PATCH 0164/1024] [XFS] Restore the lowspace extent allocator algorithm When free space is running low the extent allocator may choose to allocate an extent from an AG without leaving sufficient space for a btree split when inserting the new extent (see where xfs_bmap_btalloc() sets minleft to 0). In this case the allocator will enable the lowspace algorithm which is supposed to allow further allocations (such as btree splits and newroots) to allocate from sequential AGs. This algorithm has been broken for a long time and this patch restores its behaviour. SGI-PV: 983338 SGI-Modid: xfs-linux-melb:xfs-kern:31358a Signed-off-by: Lachlan McIlroy Signed-off-by: David Chinner --- fs/xfs/xfs_bmap.h | 13 ++++++++++++- fs/xfs/xfs_bmap_btree.c | 8 ++++++-- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h index 6ff70cda451..9f3e3a836d1 100644 --- a/fs/xfs/xfs_bmap.h +++ b/fs/xfs/xfs_bmap.h @@ -54,12 +54,23 @@ typedef struct xfs_bmap_free_item /* * Header for free extent list. + * + * xbf_low is used by the allocator to activate the lowspace algorithm - + * when free space is running low the extent allocator may choose to + * allocate an extent from an AG without leaving sufficient space for + * a btree split when inserting the new extent. In this case the allocator + * will enable the lowspace algorithm which is supposed to allow further + * allocations (such as btree splits and newroots) to allocate from + * sequential AGs. In order to avoid locking AGs out of order the lowspace + * algorithm will start searching for free space from AG 0. If the correct + * transaction reservations have been made then this algorithm will eventually + * find all the space it needs. */ typedef struct xfs_bmap_free { xfs_bmap_free_item_t *xbf_first; /* list of to-be-free extents */ int xbf_count; /* count of items on list */ - int xbf_low; /* kludge: alloc in low mode */ + int xbf_low; /* alloc in low mode */ } xfs_bmap_free_t; #define XFS_BMAP_MAX_NMAP 4 diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c index 3fc09cd8d51..1140cef4ba9 100644 --- a/fs/xfs/xfs_bmap_btree.c +++ b/fs/xfs/xfs_bmap_btree.c @@ -1509,7 +1509,9 @@ xfs_bmbt_split( * block allocation here and corrupt the filesystem. */ args.minleft = xfs_trans_get_block_res(args.tp); - } else + } else if (cur->bc_private.b.flist->xbf_low) + args.type = XFS_ALLOCTYPE_START_BNO; + else args.type = XFS_ALLOCTYPE_NEAR_BNO; args.mod = args.alignment = args.total = args.isfl = args.userdata = args.minalignslop = 0; @@ -2237,7 +2239,9 @@ xfs_bmbt_newroot( #endif args.fsbno = be64_to_cpu(*pp); args.type = XFS_ALLOCTYPE_START_BNO; - } else + } else if (cur->bc_private.b.flist->xbf_low) + args.type = XFS_ALLOCTYPE_START_BNO; + else args.type = XFS_ALLOCTYPE_NEAR_BNO; if ((error = xfs_alloc_vextent(&args))) { XFS_BMBT_TRACE_CURSOR(cur, ERROR); -- GitLab From 313b5c767a044c7a0db5e773cb7aea70383b2627 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 27 Jun 2008 13:33:11 +1000 Subject: [PATCH 0165/1024] [XFS] Allow xfs_bmbt_split() to fallback to the lowspace allocator algorithm If xfs_bmbt_split() cannot find an AG with sufficient free space to satisfy a full extent btree split then fall back to the lowspace allocator algorithm. SGI-PV: 983338 SGI-Modid: xfs-linux-melb:xfs-kern:31359a Signed-off-by: Lachlan McIlroy Signed-off-by: David Chinner --- fs/xfs/xfs_bmap_btree.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c index 1140cef4ba9..23efad29a5c 100644 --- a/fs/xfs/xfs_bmap_btree.c +++ b/fs/xfs/xfs_bmap_btree.c @@ -1525,6 +1525,21 @@ xfs_bmbt_split( XFS_BMBT_TRACE_CURSOR(cur, ERROR); return error; } + if (args.fsbno == NULLFSBLOCK && args.minleft) { + /* + * Could not find an AG with enough free space to satisfy + * a full btree split. Try again without minleft and if + * successful activate the lowspace algorithm. + */ + args.fsbno = 0; + args.type = XFS_ALLOCTYPE_FIRST_AG; + args.minleft = 0; + if ((error = xfs_alloc_vextent(&args))) { + XFS_BMBT_TRACE_CURSOR(cur, ERROR); + return error; + } + cur->bc_private.b.flist->xbf_low = 1; + } if (args.fsbno == NULLFSBLOCK) { XFS_BMBT_TRACE_CURSOR(cur, EXIT); *stat = 0; -- GitLab From 8f8670bb1cfa177d35c54e4cc96152dc425a7ab3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 27 Jun 2008 13:34:26 +1000 Subject: [PATCH 0166/1024] [XFS] Don't update mtime on rename source As reported by Michael-John Turner XFS updates the mtime on the source inode of a rename call in case it's a directory and changes the parent. This doesn't make any sense, is not mentioned in the standards and not performed by any other Linux filesystems so remove it. SGI-PV: 983684 SGI-Modid: xfs-linux-melb:xfs-kern:31364a Signed-off-by: Christoph Hellwig Signed-off-by: Barry Naujok Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_rename.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c index d8063e1ad29..d700dacdb10 100644 --- a/fs/xfs/xfs_rename.c +++ b/fs/xfs/xfs_rename.c @@ -336,21 +336,17 @@ xfs_rename( ASSERT(error != EEXIST); if (error) goto abort_return; - xfs_ichgtime(src_ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG); - - } else { - /* - * We always want to hit the ctime on the source inode. - * We do it in the if clause above for the 'new_parent && - * src_is_directory' case, and here we get all the other - * cases. This isn't strictly required by the standards - * since the source inode isn't really being changed, - * but old unix file systems did it and some incremental - * backup programs won't work without it. - */ - xfs_ichgtime(src_ip, XFS_ICHGTIME_CHG); } + /* + * We always want to hit the ctime on the source inode. + * + * This isn't strictly required by the standards since the source + * inode isn't really being changed, but old unix file systems did + * it and some incremental backup programs won't work without it. + */ + xfs_ichgtime(src_ip, XFS_ICHGTIME_CHG); + /* * Adjust the link count on src_dp. This is necessary when * renaming a directory, either within one parent when -- GitLab From 2edbddd5f46cc123b68c11179115041c54759fa2 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 27 Jun 2008 13:34:34 +1000 Subject: [PATCH 0167/1024] [XFS] Don't assert if trying to mount with blocksize > pagesize If we don't do the blocksize/PAGESIZE check before calling xfs_sb_validate_fsb_count() we can assert if we try to mount with a blocksize > pagesize. The assert is valid so leave it and just move the blocksize/pagesize check earlier. SGI-PV: 983734 SGI-Modid: xfs-linux-melb:xfs-kern:31365a Signed-off-by: Lachlan McIlroy Signed-off-by: David Chinner --- fs/xfs/xfs_mount.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 1bfaa204f68..6c5d1325e7f 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -258,6 +258,19 @@ xfs_mount_validate_sb( return XFS_ERROR(EFSCORRUPTED); } + /* + * Until this is fixed only page-sized or smaller data blocks work. + */ + if (unlikely(sbp->sb_blocksize > PAGE_SIZE)) { + xfs_fs_mount_cmn_err(flags, + "file system with blocksize %d bytes", + sbp->sb_blocksize); + xfs_fs_mount_cmn_err(flags, + "only pagesize (%ld) or less will currently work.", + PAGE_SIZE); + return XFS_ERROR(ENOSYS); + } + if (xfs_sb_validate_fsb_count(sbp, sbp->sb_dblocks) || xfs_sb_validate_fsb_count(sbp, sbp->sb_rblocks)) { xfs_fs_mount_cmn_err(flags, @@ -279,19 +292,6 @@ xfs_mount_validate_sb( return XFS_ERROR(ENOSYS); } - /* - * Until this is fixed only page-sized or smaller data blocks work. - */ - if (unlikely(sbp->sb_blocksize > PAGE_SIZE)) { - xfs_fs_mount_cmn_err(flags, - "file system with blocksize %d bytes", - sbp->sb_blocksize); - xfs_fs_mount_cmn_err(flags, - "only pagesize (%ld) or less will currently work.", - PAGE_SIZE); - return XFS_ERROR(ENOSYS); - } - return 0; } -- GitLab From 136f8f21b6d564f553abe6130127d16fb50432d3 Mon Sep 17 00:00:00 2001 From: Tim Shimmin Date: Fri, 27 Jun 2008 13:34:42 +1000 Subject: [PATCH 0168/1024] [XFS] Fix up problem when CONFIG_XFS_POSIX_ACL is not set and yet we still can use the _ACL_TYPE_* definitions in linux-2.6/xfs_xattr.c. The forthcoming generic acl code will also fix this problem. SGI-PV: 982343 SGI-Modid: xfs-linux-melb:xfs-kern:31369a Signed-off-by: Tim Shimmin Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy --- fs/xfs/xfs_acl.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_acl.h b/fs/xfs/xfs_acl.h index 332a772461c..323ee94cf83 100644 --- a/fs/xfs/xfs_acl.h +++ b/fs/xfs/xfs_acl.h @@ -46,6 +46,8 @@ typedef struct xfs_acl { #define SGI_ACL_FILE_SIZE (sizeof(SGI_ACL_FILE)-1) #define SGI_ACL_DEFAULT_SIZE (sizeof(SGI_ACL_DEFAULT)-1) +#define _ACL_TYPE_ACCESS 1 +#define _ACL_TYPE_DEFAULT 2 #ifdef CONFIG_XFS_POSIX_ACL @@ -66,8 +68,6 @@ extern int xfs_acl_vset(bhv_vnode_t *, void *, size_t, int); extern int xfs_acl_vget(bhv_vnode_t *, void *, size_t, int); extern int xfs_acl_vremove(bhv_vnode_t *, int); -#define _ACL_TYPE_ACCESS 1 -#define _ACL_TYPE_DEFAULT 2 #define _ACL_PERM_INVALID(perm) ((perm) & ~(ACL_READ|ACL_WRITE|ACL_EXECUTE)) #define _ACL_INHERIT(c,m,d) (xfs_acl_inherit(c,m,d)) -- GitLab From 9f8868ffb39c2f80ba69df4552cb530b6634f646 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 18 Jul 2008 17:11:46 +1000 Subject: [PATCH 0169/1024] [XFS] streamline init/exit path Currently the xfs module init/exit code is a mess. It's farmed out over a lot of function with very little error checking. This patch makes sure we propagate all initialization failures properly and clean up after them. Various runtime initializations are replaced with compile-time initializations where possible to make this easier. The exit path is similarly consolidated. There's now split out function to create/destroy the kmem zones and alloc/free the trace buffers. I've also changed the ktrace allocations to KM_MAYFAIL and handled errors resulting from that. And yes, we really should replace the XFS_*_TRACE ifdefs with a single XFS_TRACE.. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:31354a Signed-off-by: Christoph Hellwig Signed-off-by: Niv Sardi Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_stats.c | 15 +- fs/xfs/linux-2.6/xfs_stats.h | 11 +- fs/xfs/linux-2.6/xfs_super.c | 330 ++++++++++++++++++++++++++++------ fs/xfs/linux-2.6/xfs_sysctl.c | 8 +- fs/xfs/linux-2.6/xfs_sysctl.h | 4 +- fs/xfs/support/uuid.c | 8 +- fs/xfs/support/uuid.h | 1 - fs/xfs/xfs_da_btree.c | 2 +- fs/xfs/xfs_error.c | 8 - fs/xfs/xfs_error.h | 1 - fs/xfs/xfs_filestream.c | 4 +- fs/xfs/xfs_mount.h | 3 - fs/xfs/xfs_mru_cache.c | 13 +- fs/xfs/xfs_vfsops.c | 131 -------------- 14 files changed, 318 insertions(+), 221 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_stats.c b/fs/xfs/linux-2.6/xfs_stats.c index e480b610205..3d5b67c075c 100644 --- a/fs/xfs/linux-2.6/xfs_stats.c +++ b/fs/xfs/linux-2.6/xfs_stats.c @@ -98,12 +98,21 @@ xfs_read_xfsstats( return len; } -void +int xfs_init_procfs(void) { if (!proc_mkdir("fs/xfs", NULL)) - return; - create_proc_read_entry("fs/xfs/stat", 0, NULL, xfs_read_xfsstats, NULL); + goto out; + + if (!create_proc_read_entry("fs/xfs/stat", 0, NULL, + xfs_read_xfsstats, NULL)) + goto out_remove_entry; + return 0; + + out_remove_entry: + remove_proc_entry("fs/xfs", NULL); + out: + return -ENOMEM; } void diff --git a/fs/xfs/linux-2.6/xfs_stats.h b/fs/xfs/linux-2.6/xfs_stats.h index afd0b0d5fdb..3fa753d7b70 100644 --- a/fs/xfs/linux-2.6/xfs_stats.h +++ b/fs/xfs/linux-2.6/xfs_stats.h @@ -134,7 +134,7 @@ DECLARE_PER_CPU(struct xfsstats, xfsstats); #define XFS_STATS_DEC(v) (per_cpu(xfsstats, current_cpu()).v--) #define XFS_STATS_ADD(v, inc) (per_cpu(xfsstats, current_cpu()).v += (inc)) -extern void xfs_init_procfs(void); +extern int xfs_init_procfs(void); extern void xfs_cleanup_procfs(void); @@ -144,8 +144,13 @@ extern void xfs_cleanup_procfs(void); # define XFS_STATS_DEC(count) # define XFS_STATS_ADD(count, inc) -static inline void xfs_init_procfs(void) { }; -static inline void xfs_cleanup_procfs(void) { }; +static inline int xfs_init_procfs(void) +{ + return 0 +}; +static inline void xfs_cleanup_procfs(void) +{ +}; #endif /* !CONFIG_PROC_FS */ diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 967603c4699..7c621dfee73 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -53,6 +53,11 @@ #include "xfs_log_priv.h" #include "xfs_trans_priv.h" #include "xfs_filestream.h" +#include "xfs_da_btree.h" +#include "xfs_dir2_trace.h" +#include "xfs_extfree_item.h" +#include "xfs_mru_cache.h" +#include "xfs_inode_item.h" #include #include @@ -987,42 +992,6 @@ xfs_fs_inode_init_once( inode_init_once(vn_to_inode((bhv_vnode_t *)vnode)); } -STATIC int __init -xfs_init_zones(void) -{ - xfs_vnode_zone = kmem_zone_init_flags(sizeof(bhv_vnode_t), "xfs_vnode", - KM_ZONE_HWALIGN | KM_ZONE_RECLAIM | - KM_ZONE_SPREAD, - xfs_fs_inode_init_once); - if (!xfs_vnode_zone) - goto out; - - xfs_ioend_zone = kmem_zone_init(sizeof(xfs_ioend_t), "xfs_ioend"); - if (!xfs_ioend_zone) - goto out_destroy_vnode_zone; - - xfs_ioend_pool = mempool_create_slab_pool(4 * MAX_BUF_PER_PAGE, - xfs_ioend_zone); - if (!xfs_ioend_pool) - goto out_free_ioend_zone; - return 0; - - out_free_ioend_zone: - kmem_zone_destroy(xfs_ioend_zone); - out_destroy_vnode_zone: - kmem_zone_destroy(xfs_vnode_zone); - out: - return -ENOMEM; -} - -STATIC void -xfs_destroy_zones(void) -{ - mempool_destroy(xfs_ioend_pool); - kmem_zone_destroy(xfs_vnode_zone); - kmem_zone_destroy(xfs_ioend_zone); -} - /* * Attempt to flush the inode, this will actually fail * if the inode is pinned, but we dirty the inode again @@ -1939,9 +1908,235 @@ static struct file_system_type xfs_fs_type = { .fs_flags = FS_REQUIRES_DEV, }; +STATIC int __init +xfs_alloc_trace_bufs(void) +{ +#ifdef XFS_ALLOC_TRACE + xfs_alloc_trace_buf = ktrace_alloc(XFS_ALLOC_TRACE_SIZE, KM_MAYFAIL); + if (!xfs_alloc_trace_buf) + goto out; +#endif +#ifdef XFS_BMAP_TRACE + xfs_bmap_trace_buf = ktrace_alloc(XFS_BMAP_TRACE_SIZE, KM_MAYFAIL); + if (!xfs_bmap_trace_buf) + goto out_free_alloc_trace; +#endif +#ifdef XFS_BMBT_TRACE + xfs_bmbt_trace_buf = ktrace_alloc(XFS_BMBT_TRACE_SIZE, KM_MAYFAIL); + if (!xfs_bmbt_trace_buf) + goto out_free_bmap_trace; +#endif +#ifdef XFS_ATTR_TRACE + xfs_attr_trace_buf = ktrace_alloc(XFS_ATTR_TRACE_SIZE, KM_MAYFAIL); + if (!xfs_attr_trace_buf) + goto out_free_bmbt_trace; +#endif +#ifdef XFS_DIR2_TRACE + xfs_dir2_trace_buf = ktrace_alloc(XFS_DIR2_GTRACE_SIZE, KM_MAYFAIL); + if (!xfs_dir2_trace_buf) + goto out_free_attr_trace; +#endif + + return 0; + +#ifdef XFS_DIR2_TRACE + out_free_attr_trace: +#endif +#ifdef XFS_ATTR_TRACE + ktrace_free(xfs_attr_trace_buf); + out_free_bmbt_trace: +#endif +#ifdef XFS_BMBT_TRACE + ktrace_free(xfs_bmbt_trace_buf); + out_free_bmap_trace: +#endif +#ifdef XFS_BMAP_TRACE + ktrace_free(xfs_bmap_trace_buf); + out_free_alloc_trace: +#endif +#ifdef XFS_ALLOC_TRACE + ktrace_free(xfs_alloc_trace_buf); + out: +#endif + return -ENOMEM; +} + +STATIC void +xfs_free_trace_bufs(void) +{ +#ifdef XFS_DIR2_TRACE + ktrace_free(xfs_dir2_trace_buf); +#endif +#ifdef XFS_ATTR_TRACE + ktrace_free(xfs_attr_trace_buf); +#endif +#ifdef XFS_BMBT_TRACE + ktrace_free(xfs_bmbt_trace_buf); +#endif +#ifdef XFS_BMAP_TRACE + ktrace_free(xfs_bmap_trace_buf); +#endif +#ifdef XFS_ALLOC_TRACE + ktrace_free(xfs_alloc_trace_buf); +#endif +} + +STATIC int __init +xfs_init_zones(void) +{ + xfs_vnode_zone = kmem_zone_init_flags(sizeof(bhv_vnode_t), "xfs_vnode", + KM_ZONE_HWALIGN | KM_ZONE_RECLAIM | + KM_ZONE_SPREAD, + xfs_fs_inode_init_once); + if (!xfs_vnode_zone) + goto out; + + xfs_ioend_zone = kmem_zone_init(sizeof(xfs_ioend_t), "xfs_ioend"); + if (!xfs_ioend_zone) + goto out_destroy_vnode_zone; + + xfs_ioend_pool = mempool_create_slab_pool(4 * MAX_BUF_PER_PAGE, + xfs_ioend_zone); + if (!xfs_ioend_pool) + goto out_destroy_ioend_zone; + + xfs_log_ticket_zone = kmem_zone_init(sizeof(xlog_ticket_t), + "xfs_log_ticket"); + if (!xfs_log_ticket_zone) + goto out_destroy_ioend_pool; + + xfs_bmap_free_item_zone = kmem_zone_init(sizeof(xfs_bmap_free_item_t), + "xfs_bmap_free_item"); + if (!xfs_bmap_free_item_zone) + goto out_destroy_log_ticket_zone; + xfs_btree_cur_zone = kmem_zone_init(sizeof(xfs_btree_cur_t), + "xfs_btree_cur"); + if (!xfs_btree_cur_zone) + goto out_destroy_bmap_free_item_zone; + + xfs_da_state_zone = kmem_zone_init(sizeof(xfs_da_state_t), + "xfs_da_state"); + if (!xfs_da_state_zone) + goto out_destroy_btree_cur_zone; + + xfs_dabuf_zone = kmem_zone_init(sizeof(xfs_dabuf_t), "xfs_dabuf"); + if (!xfs_dabuf_zone) + goto out_destroy_da_state_zone; + + xfs_ifork_zone = kmem_zone_init(sizeof(xfs_ifork_t), "xfs_ifork"); + if (!xfs_ifork_zone) + goto out_destroy_dabuf_zone; + + xfs_trans_zone = kmem_zone_init(sizeof(xfs_trans_t), "xfs_trans"); + if (!xfs_trans_zone) + goto out_destroy_ifork_zone; + + /* + * The size of the zone allocated buf log item is the maximum + * size possible under XFS. This wastes a little bit of memory, + * but it is much faster. + */ + xfs_buf_item_zone = kmem_zone_init((sizeof(xfs_buf_log_item_t) + + (((XFS_MAX_BLOCKSIZE / XFS_BLI_CHUNK) / + NBWORD) * sizeof(int))), "xfs_buf_item"); + if (!xfs_buf_item_zone) + goto out_destroy_trans_zone; + + xfs_efd_zone = kmem_zone_init((sizeof(xfs_efd_log_item_t) + + ((XFS_EFD_MAX_FAST_EXTENTS - 1) * + sizeof(xfs_extent_t))), "xfs_efd_item"); + if (!xfs_efd_zone) + goto out_destroy_buf_item_zone; + + xfs_efi_zone = kmem_zone_init((sizeof(xfs_efi_log_item_t) + + ((XFS_EFI_MAX_FAST_EXTENTS - 1) * + sizeof(xfs_extent_t))), "xfs_efi_item"); + if (!xfs_efi_zone) + goto out_destroy_efd_zone; + + xfs_inode_zone = + kmem_zone_init_flags(sizeof(xfs_inode_t), "xfs_inode", + KM_ZONE_HWALIGN | KM_ZONE_RECLAIM | + KM_ZONE_SPREAD, NULL); + if (!xfs_inode_zone) + goto out_destroy_efi_zone; + + xfs_ili_zone = + kmem_zone_init_flags(sizeof(xfs_inode_log_item_t), "xfs_ili", + KM_ZONE_SPREAD, NULL); + if (!xfs_ili_zone) + goto out_destroy_inode_zone; + +#ifdef CONFIG_XFS_POSIX_ACL + xfs_acl_zone = kmem_zone_init(sizeof(xfs_acl_t), "xfs_acl"); + if (!xfs_acl_zone) + goto out_destroy_ili_zone; +#endif + + return 0; + +#ifdef CONFIG_XFS_POSIX_ACL + out_destroy_ili_zone: +#endif + kmem_zone_destroy(xfs_ili_zone); + out_destroy_inode_zone: + kmem_zone_destroy(xfs_inode_zone); + out_destroy_efi_zone: + kmem_zone_destroy(xfs_efi_zone); + out_destroy_efd_zone: + kmem_zone_destroy(xfs_efd_zone); + out_destroy_buf_item_zone: + kmem_zone_destroy(xfs_buf_item_zone); + out_destroy_trans_zone: + kmem_zone_destroy(xfs_trans_zone); + out_destroy_ifork_zone: + kmem_zone_destroy(xfs_ifork_zone); + out_destroy_dabuf_zone: + kmem_zone_destroy(xfs_dabuf_zone); + out_destroy_da_state_zone: + kmem_zone_destroy(xfs_da_state_zone); + out_destroy_btree_cur_zone: + kmem_zone_destroy(xfs_btree_cur_zone); + out_destroy_bmap_free_item_zone: + kmem_zone_destroy(xfs_bmap_free_item_zone); + out_destroy_log_ticket_zone: + kmem_zone_destroy(xfs_log_ticket_zone); + out_destroy_ioend_pool: + mempool_destroy(xfs_ioend_pool); + out_destroy_ioend_zone: + kmem_zone_destroy(xfs_ioend_zone); + out_destroy_vnode_zone: + kmem_zone_destroy(xfs_vnode_zone); + out: + return -ENOMEM; +} + +STATIC void +xfs_destroy_zones(void) +{ +#ifdef CONFIG_XFS_POSIX_ACL + kmem_zone_destroy(xfs_acl_zone); +#endif + kmem_zone_destroy(xfs_ili_zone); + kmem_zone_destroy(xfs_inode_zone); + kmem_zone_destroy(xfs_efi_zone); + kmem_zone_destroy(xfs_efd_zone); + kmem_zone_destroy(xfs_buf_item_zone); + kmem_zone_destroy(xfs_trans_zone); + kmem_zone_destroy(xfs_ifork_zone); + kmem_zone_destroy(xfs_dabuf_zone); + kmem_zone_destroy(xfs_da_state_zone); + kmem_zone_destroy(xfs_btree_cur_zone); + kmem_zone_destroy(xfs_bmap_free_item_zone); + kmem_zone_destroy(xfs_log_ticket_zone); + mempool_destroy(xfs_ioend_pool); + kmem_zone_destroy(xfs_ioend_zone); + kmem_zone_destroy(xfs_vnode_zone); + +} STATIC int __init -init_xfs_fs( void ) +init_xfs_fs(void) { int error; static char message[] __initdata = KERN_INFO \ @@ -1950,42 +2145,73 @@ init_xfs_fs( void ) printk(message); ktrace_init(64); + vn_init(); + xfs_dir_startup(); error = xfs_init_zones(); - if (error < 0) - goto undo_zones; + if (error) + goto out; + + error = xfs_alloc_trace_bufs(); + if (error) + goto out_destroy_zones; + + error = xfs_mru_cache_init(); + if (error) + goto out_free_trace_buffers; + + error = xfs_filestream_init(); + if (error) + goto out_mru_cache_uninit; error = xfs_buf_init(); - if (error < 0) - goto undo_buffers; + if (error) + goto out_filestream_uninit; + + error = xfs_init_procfs(); + if (error) + goto out_buf_terminate; + + error = xfs_sysctl_register(); + if (error) + goto out_cleanup_procfs; - vn_init(); - xfs_init(); - uuid_init(); vfs_initquota(); error = register_filesystem(&xfs_fs_type); if (error) - goto undo_register; + goto out_sysctl_unregister; return 0; -undo_register: + out_sysctl_unregister: + xfs_sysctl_unregister(); + out_cleanup_procfs: + xfs_cleanup_procfs(); + out_buf_terminate: xfs_buf_terminate(); - -undo_buffers: + out_filestream_uninit: + xfs_filestream_uninit(); + out_mru_cache_uninit: + xfs_mru_cache_uninit(); + out_free_trace_buffers: + xfs_free_trace_bufs(); + out_destroy_zones: xfs_destroy_zones(); - -undo_zones: + out: return error; } STATIC void __exit -exit_xfs_fs( void ) +exit_xfs_fs(void) { vfs_exitquota(); unregister_filesystem(&xfs_fs_type); - xfs_cleanup(); + xfs_sysctl_unregister(); + xfs_cleanup_procfs(); xfs_buf_terminate(); + xfs_filestream_uninit(); + xfs_mru_cache_uninit(); + xfs_free_trace_bufs(); xfs_destroy_zones(); ktrace_uninit(); } diff --git a/fs/xfs/linux-2.6/xfs_sysctl.c b/fs/xfs/linux-2.6/xfs_sysctl.c index bb997d75c05..7dacb5bbde3 100644 --- a/fs/xfs/linux-2.6/xfs_sysctl.c +++ b/fs/xfs/linux-2.6/xfs_sysctl.c @@ -259,15 +259,17 @@ static ctl_table xfs_root_table[] = { {} }; -void +int xfs_sysctl_register(void) { xfs_table_header = register_sysctl_table(xfs_root_table); + if (!xfs_table_header) + return -ENOMEM; + return 0; } void xfs_sysctl_unregister(void) { - if (xfs_table_header) - unregister_sysctl_table(xfs_table_header); + unregister_sysctl_table(xfs_table_header); } diff --git a/fs/xfs/linux-2.6/xfs_sysctl.h b/fs/xfs/linux-2.6/xfs_sysctl.h index 98b97e399d6..4aadb8056c3 100644 --- a/fs/xfs/linux-2.6/xfs_sysctl.h +++ b/fs/xfs/linux-2.6/xfs_sysctl.h @@ -93,10 +93,10 @@ enum { extern xfs_param_t xfs_params; #ifdef CONFIG_SYSCTL -extern void xfs_sysctl_register(void); +extern int xfs_sysctl_register(void); extern void xfs_sysctl_unregister(void); #else -# define xfs_sysctl_register() do { } while (0) +# define xfs_sysctl_register() (0) # define xfs_sysctl_unregister() do { } while (0) #endif /* CONFIG_SYSCTL */ diff --git a/fs/xfs/support/uuid.c b/fs/xfs/support/uuid.c index 493a6ecf859..5830c040ea7 100644 --- a/fs/xfs/support/uuid.c +++ b/fs/xfs/support/uuid.c @@ -17,7 +17,7 @@ */ #include -static mutex_t uuid_monitor; +static DEFINE_MUTEX(uuid_monitor); static int uuid_table_size; static uuid_t *uuid_table; @@ -132,9 +132,3 @@ uuid_table_remove(uuid_t *uuid) ASSERT(i < uuid_table_size); mutex_unlock(&uuid_monitor); } - -void __init -uuid_init(void) -{ - mutex_init(&uuid_monitor); -} diff --git a/fs/xfs/support/uuid.h b/fs/xfs/support/uuid.h index b6f5922199b..cff5b607d44 100644 --- a/fs/xfs/support/uuid.h +++ b/fs/xfs/support/uuid.h @@ -22,7 +22,6 @@ typedef struct { unsigned char __u_bits[16]; } uuid_t; -extern void uuid_init(void); extern void uuid_create_nil(uuid_t *uuid); extern int uuid_is_nil(uuid_t *uuid); extern int uuid_equal(uuid_t *uuid1, uuid_t *uuid2); diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index edc0aef4e51..9e561a9cefc 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -2240,7 +2240,7 @@ xfs_da_state_free(xfs_da_state_t *state) #ifdef XFS_DABUF_DEBUG xfs_dabuf_t *xfs_dabuf_global_list; -spinlock_t xfs_dabuf_global_lock; +static DEFINE_SPINLOCK(xfs_dabuf_global_lock); #endif /* diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c index 7380a00644c..f66756cfb5e 100644 --- a/fs/xfs/xfs_error.c +++ b/fs/xfs/xfs_error.c @@ -66,14 +66,6 @@ int xfs_etest[XFS_NUM_INJECT_ERROR]; int64_t xfs_etest_fsid[XFS_NUM_INJECT_ERROR]; char * xfs_etest_fsname[XFS_NUM_INJECT_ERROR]; -void -xfs_error_test_init(void) -{ - memset(xfs_etest, 0, sizeof(xfs_etest)); - memset(xfs_etest_fsid, 0, sizeof(xfs_etest_fsid)); - memset(xfs_etest_fsname, 0, sizeof(xfs_etest_fsname)); -} - int xfs_error_test(int error_tag, int *fsidp, char *expression, int line, char *file, unsigned long randfactor) diff --git a/fs/xfs/xfs_error.h b/fs/xfs/xfs_error.h index 6490d2a9f8e..d8559d132ef 100644 --- a/fs/xfs/xfs_error.h +++ b/fs/xfs/xfs_error.h @@ -127,7 +127,6 @@ extern void xfs_corruption_error(char *tag, int level, struct xfs_mount *mp, #if (defined(DEBUG) || defined(INDUCE_IO_ERROR)) extern int xfs_error_test(int, int *, char *, int, char *, unsigned long); -extern void xfs_error_test_init(void); #define XFS_NUM_INJECT_ERROR 10 diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c index 3f3785b1080..c38fd14fca2 100644 --- a/fs/xfs/xfs_filestream.c +++ b/fs/xfs/xfs_filestream.c @@ -397,10 +397,12 @@ int xfs_filestream_init(void) { item_zone = kmem_zone_init(sizeof(fstrm_item_t), "fstrm_item"); + if (!item_zone) + return -ENOMEM; #ifdef XFS_FILESTREAMS_TRACE xfs_filestreams_trace_buf = ktrace_alloc(XFS_FSTRM_KTRACE_SIZE, KM_SLEEP); #endif - return item_zone ? 0 : -ENOMEM; + return 0; } /* diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index 2a75f1703b3..5269bd6e3df 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -546,9 +546,6 @@ extern void xfs_qmops_put(struct xfs_mount *); extern struct xfs_dmops xfs_dmcore_xfs; -extern int xfs_init(void); -extern void xfs_cleanup(void); - #endif /* __KERNEL__ */ #endif /* __XFS_MOUNT_H__ */ diff --git a/fs/xfs/xfs_mru_cache.c b/fs/xfs/xfs_mru_cache.c index 26d14a1e0e1..afee7eb2432 100644 --- a/fs/xfs/xfs_mru_cache.c +++ b/fs/xfs/xfs_mru_cache.c @@ -307,15 +307,18 @@ xfs_mru_cache_init(void) xfs_mru_elem_zone = kmem_zone_init(sizeof(xfs_mru_cache_elem_t), "xfs_mru_cache_elem"); if (!xfs_mru_elem_zone) - return ENOMEM; + goto out; xfs_mru_reap_wq = create_singlethread_workqueue("xfs_mru_cache"); - if (!xfs_mru_reap_wq) { - kmem_zone_destroy(xfs_mru_elem_zone); - return ENOMEM; - } + if (!xfs_mru_reap_wq) + goto out_destroy_mru_elem_zone; return 0; + + out_destroy_mru_elem_zone: + kmem_zone_destroy(xfs_mru_elem_zone); + out: + return -ENOMEM; } void diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c index 8b5a3376c2f..4a9a43315a8 100644 --- a/fs/xfs/xfs_vfsops.c +++ b/fs/xfs/xfs_vfsops.c @@ -58,137 +58,6 @@ #include "xfs_utils.h" -int __init -xfs_init(void) -{ -#ifdef XFS_DABUF_DEBUG - extern spinlock_t xfs_dabuf_global_lock; - spin_lock_init(&xfs_dabuf_global_lock); -#endif - - /* - * Initialize all of the zone allocators we use. - */ - xfs_log_ticket_zone = kmem_zone_init(sizeof(xlog_ticket_t), - "xfs_log_ticket"); - xfs_bmap_free_item_zone = kmem_zone_init(sizeof(xfs_bmap_free_item_t), - "xfs_bmap_free_item"); - xfs_btree_cur_zone = kmem_zone_init(sizeof(xfs_btree_cur_t), - "xfs_btree_cur"); - xfs_da_state_zone = kmem_zone_init(sizeof(xfs_da_state_t), - "xfs_da_state"); - xfs_dabuf_zone = kmem_zone_init(sizeof(xfs_dabuf_t), "xfs_dabuf"); - xfs_ifork_zone = kmem_zone_init(sizeof(xfs_ifork_t), "xfs_ifork"); - xfs_trans_zone = kmem_zone_init(sizeof(xfs_trans_t), "xfs_trans"); - xfs_acl_zone_init(xfs_acl_zone, "xfs_acl"); - xfs_mru_cache_init(); - xfs_filestream_init(); - - /* - * The size of the zone allocated buf log item is the maximum - * size possible under XFS. This wastes a little bit of memory, - * but it is much faster. - */ - xfs_buf_item_zone = - kmem_zone_init((sizeof(xfs_buf_log_item_t) + - (((XFS_MAX_BLOCKSIZE / XFS_BLI_CHUNK) / - NBWORD) * sizeof(int))), - "xfs_buf_item"); - xfs_efd_zone = - kmem_zone_init((sizeof(xfs_efd_log_item_t) + - ((XFS_EFD_MAX_FAST_EXTENTS - 1) * - sizeof(xfs_extent_t))), - "xfs_efd_item"); - xfs_efi_zone = - kmem_zone_init((sizeof(xfs_efi_log_item_t) + - ((XFS_EFI_MAX_FAST_EXTENTS - 1) * - sizeof(xfs_extent_t))), - "xfs_efi_item"); - - /* - * These zones warrant special memory allocator hints - */ - xfs_inode_zone = - kmem_zone_init_flags(sizeof(xfs_inode_t), "xfs_inode", - KM_ZONE_HWALIGN | KM_ZONE_RECLAIM | - KM_ZONE_SPREAD, NULL); - xfs_ili_zone = - kmem_zone_init_flags(sizeof(xfs_inode_log_item_t), "xfs_ili", - KM_ZONE_SPREAD, NULL); - - /* - * Allocate global trace buffers. - */ -#ifdef XFS_ALLOC_TRACE - xfs_alloc_trace_buf = ktrace_alloc(XFS_ALLOC_TRACE_SIZE, KM_SLEEP); -#endif -#ifdef XFS_BMAP_TRACE - xfs_bmap_trace_buf = ktrace_alloc(XFS_BMAP_TRACE_SIZE, KM_SLEEP); -#endif -#ifdef XFS_BMBT_TRACE - xfs_bmbt_trace_buf = ktrace_alloc(XFS_BMBT_TRACE_SIZE, KM_SLEEP); -#endif -#ifdef XFS_ATTR_TRACE - xfs_attr_trace_buf = ktrace_alloc(XFS_ATTR_TRACE_SIZE, KM_SLEEP); -#endif -#ifdef XFS_DIR2_TRACE - xfs_dir2_trace_buf = ktrace_alloc(XFS_DIR2_GTRACE_SIZE, KM_SLEEP); -#endif - - xfs_dir_startup(); - -#if (defined(DEBUG) || defined(INDUCE_IO_ERROR)) - xfs_error_test_init(); -#endif /* DEBUG || INDUCE_IO_ERROR */ - - xfs_init_procfs(); - xfs_sysctl_register(); - return 0; -} - -void __exit -xfs_cleanup(void) -{ - extern kmem_zone_t *xfs_inode_zone; - extern kmem_zone_t *xfs_efd_zone; - extern kmem_zone_t *xfs_efi_zone; - - xfs_cleanup_procfs(); - xfs_sysctl_unregister(); - xfs_filestream_uninit(); - xfs_mru_cache_uninit(); - xfs_acl_zone_destroy(xfs_acl_zone); - -#ifdef XFS_DIR2_TRACE - ktrace_free(xfs_dir2_trace_buf); -#endif -#ifdef XFS_ATTR_TRACE - ktrace_free(xfs_attr_trace_buf); -#endif -#ifdef XFS_BMBT_TRACE - ktrace_free(xfs_bmbt_trace_buf); -#endif -#ifdef XFS_BMAP_TRACE - ktrace_free(xfs_bmap_trace_buf); -#endif -#ifdef XFS_ALLOC_TRACE - ktrace_free(xfs_alloc_trace_buf); -#endif - - kmem_zone_destroy(xfs_bmap_free_item_zone); - kmem_zone_destroy(xfs_btree_cur_zone); - kmem_zone_destroy(xfs_inode_zone); - kmem_zone_destroy(xfs_trans_zone); - kmem_zone_destroy(xfs_da_state_zone); - kmem_zone_destroy(xfs_dabuf_zone); - kmem_zone_destroy(xfs_buf_item_zone); - kmem_zone_destroy(xfs_efd_zone); - kmem_zone_destroy(xfs_efi_zone); - kmem_zone_destroy(xfs_ifork_zone); - kmem_zone_destroy(xfs_ili_zone); - kmem_zone_destroy(xfs_log_ticket_zone); -} - STATIC void xfs_quiesce_fs( xfs_mount_t *mp) -- GitLab From deeb5912db12e8b7ccf3f4b1afaad60bc29abed9 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Fri, 18 Jul 2008 17:12:18 +1000 Subject: [PATCH 0170/1024] [XFS] Disable queue flag test in barrier check. md raid1 can pass down barriers, but does not set an ordered flag on the queue, so xfs does not even attempt a barrier write, and will never use barriers on these block devices. Remove the flag check and just let the barrier write test determine barrier support. A possible risk here is that if something does not set an ordered flag and also does not properly return an error on a barrier write... but if it's any consolation jbd/ext3/reiserfs never test the flag, and don't even do a test write, they just disable barriers the first time an actual journal barrier write fails. SGI-PV: 983924 SGI-Modid: xfs-linux-melb:xfs-kern:31377a Signed-off-by: Eric Sandeen Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 7c621dfee73..fcb4931902a 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -746,14 +746,6 @@ xfs_mountfs_check_barriers(xfs_mount_t *mp) return; } - if (mp->m_ddev_targp->bt_bdev->bd_disk->queue->ordered == - QUEUE_ORDERED_NONE) { - xfs_fs_cmn_err(CE_NOTE, mp, - "Disabling barriers, not supported by the underlying device"); - mp->m_flags &= ~XFS_MOUNT_BARRIER; - return; - } - if (xfs_readonly_buftarg(mp->m_ddev_targp)) { xfs_fs_cmn_err(CE_NOTE, mp, "Disabling barriers, underlying device is readonly"); -- GitLab From 62a877e35d5085c65936ed3194d1bbaf84f419e1 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 18 Jul 2008 17:12:36 +1000 Subject: [PATCH 0171/1024] [XFS] fix mount option parsing in remount Remount currently happily accept any option thrown at it, although the only filesystem specific option it actually handles is barrier/nobarrier. And it actually doesn't handle these correctly either because it only uses the value it parsed when we're doing a ro->rw transition. In addition to that there's also a bad bug in xfs_parseargs which doesn't touch the actual option in the mount point except for a single one, XFS_MOUNT_SMALL_INUMS and thus forced any filesystem that's every remounted in some way to not support 64bit inodes with no way to recover unless unmounted. This patch changes xfs_fs_remount to use it's own linux/parser.h based options parse instead of xfs_parseargs and reject all options except for barrier/nobarrier and to the right thing in general. Eventually I'd like to have a single big option table used for mount aswell but that can wait for a while. SGI-PV: 983964 SGI-Modid: xfs-linux-melb:xfs-kern:31382a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_super.c | 72 +++++++++++++++++++++++++++--------- 1 file changed, 54 insertions(+), 18 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index fcb4931902a..b4008668004 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -66,6 +66,7 @@ #include #include #include +#include static struct quotactl_ops xfs_quotactl_operations; static struct super_operations xfs_super_operations; @@ -147,6 +148,23 @@ xfs_args_allocate( #define MNTOPT_XDSM "xdsm" /* DMI enabled (DMAPI / XDSM) */ #define MNTOPT_DMI "dmi" /* DMI enabled (DMAPI / XDSM) */ +/* + * Table driven mount option parser. + * + * Currently only used for remount, but it will be used for mount + * in the future, too. + */ +enum { + Opt_barrier, Opt_nobarrier, Opt_err +}; + +static match_table_t tokens = { + {Opt_barrier, "barrier"}, + {Opt_nobarrier, "nobarrier"}, + {Opt_err, NULL} +}; + + STATIC unsigned long suffix_strtoul(char *s, char **endp, unsigned int base) { @@ -1364,36 +1382,54 @@ xfs_fs_remount( char *options) { struct xfs_mount *mp = XFS_M(sb); - struct xfs_mount_args *args; - int error; + substring_t args[MAX_OPT_ARGS]; + char *p; - args = xfs_args_allocate(sb, 0); - if (!args) - return -ENOMEM; + while ((p = strsep(&options, ",")) != NULL) { + int token; - error = xfs_parseargs(mp, options, args, 1); - if (error) - goto out_free_args; + if (!*p) + continue; - if (!(*flags & MS_RDONLY)) { /* rw/ro -> rw */ - if (mp->m_flags & XFS_MOUNT_RDONLY) - mp->m_flags &= ~XFS_MOUNT_RDONLY; - if (args->flags & XFSMNT_BARRIER) { + token = match_token(p, tokens, args); + switch (token) { + case Opt_barrier: mp->m_flags |= XFS_MOUNT_BARRIER; - xfs_mountfs_check_barriers(mp); - } else { + + /* + * Test if barriers are actually working if we can, + * else delay this check until the filesystem is + * marked writeable. + */ + if (!(mp->m_flags & XFS_MOUNT_RDONLY)) + xfs_mountfs_check_barriers(mp); + break; + case Opt_nobarrier: mp->m_flags &= ~XFS_MOUNT_BARRIER; + break; + default: + printk(KERN_INFO + "XFS: mount option \"%s\" not supported for remount\n", p); + return -EINVAL; } - } else if (!(mp->m_flags & XFS_MOUNT_RDONLY)) { /* rw -> ro */ + } + + /* rw/ro -> rw */ + if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) { + mp->m_flags &= ~XFS_MOUNT_RDONLY; + if (mp->m_flags & XFS_MOUNT_BARRIER) + xfs_mountfs_check_barriers(mp); + } + + /* rw -> ro */ + if (!(mp->m_flags & XFS_MOUNT_RDONLY) && (*flags & MS_RDONLY)) { xfs_filestream_flush(mp); xfs_sync(mp, SYNC_DATA_QUIESCE); xfs_attr_quiesce(mp); mp->m_flags |= XFS_MOUNT_RDONLY; } - out_free_args: - kfree(args); - return -error; + return 0; } /* -- GitLab From 26cc0021805e66daa6342174fb5a8c1c862f7c8e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 18 Jul 2008 17:12:43 +1000 Subject: [PATCH 0172/1024] [XFS] s/XFS_PURGE_INODE/IRELE/g s/VN_HOLD(XFS_ITOV())/IHOLD()/ SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31405a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy --- fs/xfs/quota/xfs_qm.c | 10 +++++----- fs/xfs/quota/xfs_qm_syscalls.c | 4 ++-- fs/xfs/quota/xfs_quota_priv.h | 3 --- 3 files changed, 7 insertions(+), 10 deletions(-) diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c index 26370a3128f..021934a3d45 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/quota/xfs_qm.c @@ -445,11 +445,11 @@ xfs_qm_unmount_quotas( } } if (uqp) { - XFS_PURGE_INODE(uqp); + IRELE(uqp); mp->m_quotainfo->qi_uquotaip = NULL; } if (gqp) { - XFS_PURGE_INODE(gqp); + IRELE(gqp); mp->m_quotainfo->qi_gquotaip = NULL; } out: @@ -1240,11 +1240,11 @@ xfs_qm_destroy_quotainfo( xfs_qm_list_destroy(&qi->qi_dqlist); if (qi->qi_uquotaip) { - XFS_PURGE_INODE(qi->qi_uquotaip); + IRELE(qi->qi_uquotaip); qi->qi_uquotaip = NULL; /* paranoia */ } if (qi->qi_gquotaip) { - XFS_PURGE_INODE(qi->qi_gquotaip); + IRELE(qi->qi_gquotaip); qi->qi_gquotaip = NULL; } mutex_destroy(&qi->qi_quotaofflock); @@ -1394,7 +1394,7 @@ xfs_qm_qino_alloc( * locked exclusively and joined to the transaction already. */ ASSERT(xfs_isilocked(*ip, XFS_ILOCK_EXCL)); - VN_HOLD(XFS_ITOV((*ip))); + IHOLD(*ip); /* * Make the changes in the superblock, and log those too. diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c index 413671523cb..adfb8723f65 100644 --- a/fs/xfs/quota/xfs_qm_syscalls.c +++ b/fs/xfs/quota/xfs_qm_syscalls.c @@ -362,11 +362,11 @@ xfs_qm_scall_quotaoff( * if we don't need them anymore. */ if ((dqtype & XFS_QMOPT_UQUOTA) && XFS_QI_UQIP(mp)) { - XFS_PURGE_INODE(XFS_QI_UQIP(mp)); + IRELE(XFS_QI_UQIP(mp)); XFS_QI_UQIP(mp) = NULL; } if ((dqtype & (XFS_QMOPT_GQUOTA|XFS_QMOPT_PQUOTA)) && XFS_QI_GQIP(mp)) { - XFS_PURGE_INODE(XFS_QI_GQIP(mp)); + IRELE(XFS_QI_GQIP(mp)); XFS_QI_GQIP(mp) = NULL; } out_error: diff --git a/fs/xfs/quota/xfs_quota_priv.h b/fs/xfs/quota/xfs_quota_priv.h index 5e4a40b1c56..c4fcea600bc 100644 --- a/fs/xfs/quota/xfs_quota_priv.h +++ b/fs/xfs/quota/xfs_quota_priv.h @@ -158,9 +158,6 @@ for ((dqp) = (qlist)->qh_next; (dqp) != (xfs_dquot_t *)(qlist); \ #define XFS_IS_SUSER_DQUOT(dqp) \ (!((dqp)->q_core.d_id)) -#define XFS_PURGE_INODE(ip) \ - IRELE(ip); - #define DQFLAGTO_TYPESTR(d) (((d)->dq_flags & XFS_DQ_USER) ? "USR" : \ (((d)->dq_flags & XFS_DQ_GROUP) ? "GRP" : \ (((d)->dq_flags & XFS_DQ_PROJ) ? "PRJ":"???"))) -- GitLab From 766b0925c07cd363c17ff54ebf59b6d34d8042d5 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 18 Jul 2008 17:12:50 +1000 Subject: [PATCH 0173/1024] [XFS] fix compilation without CONFIG_PROC_FS SGI-PV: 984019 SGI-Modid: xfs-linux-melb:xfs-kern:31408a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_stats.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_stats.h b/fs/xfs/linux-2.6/xfs_stats.h index 3fa753d7b70..e83820febc9 100644 --- a/fs/xfs/linux-2.6/xfs_stats.h +++ b/fs/xfs/linux-2.6/xfs_stats.h @@ -146,11 +146,12 @@ extern void xfs_cleanup_procfs(void); static inline int xfs_init_procfs(void) { - return 0 -}; + return 0; +} + static inline void xfs_cleanup_procfs(void) { -}; +} #endif /* !CONFIG_PROC_FS */ -- GitLab From 6a617dd22bdbf5a4c9828db98c1a8b076c9e95c8 Mon Sep 17 00:00:00 2001 From: Tim Shimmin Date: Fri, 18 Jul 2008 17:13:04 +1000 Subject: [PATCH 0174/1024] [XFS] A bug was found in xfs_bmap_add_extent_unwritten_real(). In a particular case, the delta param which is supposed to describe the region where extents have changed was not updated appropriately. SGI-PV: 984030 SGI-Modid: xfs-linux-melb:xfs-kern:31663a Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy Signed-off-by: Olaf Weber --- fs/xfs/xfs_bmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index cf4dee01983..3c4beb3a432 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -1740,9 +1740,9 @@ xfs_bmap_add_extent_unwritten_real( r[1].br_state))) goto done; /* new left extent - oldext */ - PREV.br_blockcount = - new->br_startoff - PREV.br_startoff; cur->bc_rec.b = PREV; + cur->bc_rec.b.br_blockcount = + new->br_startoff - PREV.br_startoff; if ((error = xfs_bmbt_insert(cur, &i))) goto done; XFS_WANT_CORRUPTED_GOTO(i == 1, done); -- GitLab From c032bfcf468013643e05c8274824af10dd7cbb61 Mon Sep 17 00:00:00 2001 From: Lachlan McIlroy Date: Fri, 18 Jul 2008 17:13:12 +1000 Subject: [PATCH 0175/1024] [XFS] fix use after free with external logs or real-time devices SGI-PV: 983806 SGI-Modid: xfs-linux-melb:xfs-kern:31666a Signed-off-by: Lachlan McIlroy Signed-off-by: Christoph Hellwig --- fs/xfs/linux-2.6/xfs_super.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index b4008668004..30ae96397e3 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -792,12 +792,14 @@ xfs_close_devices( struct xfs_mount *mp) { if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) { + struct block_device *logdev = mp->m_logdev_targp->bt_bdev; xfs_free_buftarg(mp->m_logdev_targp); - xfs_blkdev_put(mp->m_logdev_targp->bt_bdev); + xfs_blkdev_put(logdev); } if (mp->m_rtdev_targp) { + struct block_device *rtdev = mp->m_rtdev_targp->bt_bdev; xfs_free_buftarg(mp->m_rtdev_targp); - xfs_blkdev_put(mp->m_rtdev_targp->bt_bdev); + xfs_blkdev_put(rtdev); } xfs_free_buftarg(mp->m_ddev_targp); } -- GitLab From 25fe55e814a2964c7e16d16a5d08cae6e9313a3a Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 18 Jul 2008 17:13:20 +1000 Subject: [PATCH 0176/1024] [XFS] xfs_setattr currently doesn't just handle the attributes set through ->setattr but also addition XFS-specific attributes: project id, inode flags and extent size hint. Having these in a single function makes it more complicated and forces to have us a bhv_vattr intermediate structure eating up stackspace. This patch adds a new xfs_ioctl_setattr helper for the XFS ioctls that set these attributes and remove the code to set them through xfs_setattr. SGI-PV: 984564 SGI-Modid: xfs-linux-melb:xfs-kern:31677a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_ioctl.c | 339 +++++++++++++++++++++++++++++++---- fs/xfs/linux-2.6/xfs_vnode.h | 15 -- fs/xfs/xfs_vnodeops.c | 169 +---------------- 3 files changed, 311 insertions(+), 212 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index 8eddaff3684..d2bbb0532ef 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -48,6 +48,8 @@ #include "xfs_dfrag.h" #include "xfs_fsops.h" #include "xfs_vnodeops.h" +#include "xfs_quota.h" +#include "xfs_inode_item.h" #include #include @@ -879,6 +881,297 @@ xfs_ioc_fsgetxattr( return 0; } +STATIC void +xfs_set_diflags( + struct xfs_inode *ip, + unsigned int xflags) +{ + unsigned int di_flags; + + /* can't set PREALLOC this way, just preserve it */ + di_flags = (ip->i_d.di_flags & XFS_DIFLAG_PREALLOC); + if (xflags & XFS_XFLAG_IMMUTABLE) + di_flags |= XFS_DIFLAG_IMMUTABLE; + if (xflags & XFS_XFLAG_APPEND) + di_flags |= XFS_DIFLAG_APPEND; + if (xflags & XFS_XFLAG_SYNC) + di_flags |= XFS_DIFLAG_SYNC; + if (xflags & XFS_XFLAG_NOATIME) + di_flags |= XFS_DIFLAG_NOATIME; + if (xflags & XFS_XFLAG_NODUMP) + di_flags |= XFS_DIFLAG_NODUMP; + if (xflags & XFS_XFLAG_PROJINHERIT) + di_flags |= XFS_DIFLAG_PROJINHERIT; + if (xflags & XFS_XFLAG_NODEFRAG) + di_flags |= XFS_DIFLAG_NODEFRAG; + if (xflags & XFS_XFLAG_FILESTREAM) + di_flags |= XFS_DIFLAG_FILESTREAM; + if ((ip->i_d.di_mode & S_IFMT) == S_IFDIR) { + if (xflags & XFS_XFLAG_RTINHERIT) + di_flags |= XFS_DIFLAG_RTINHERIT; + if (xflags & XFS_XFLAG_NOSYMLINKS) + di_flags |= XFS_DIFLAG_NOSYMLINKS; + if (xflags & XFS_XFLAG_EXTSZINHERIT) + di_flags |= XFS_DIFLAG_EXTSZINHERIT; + } else if ((ip->i_d.di_mode & S_IFMT) == S_IFREG) { + if (xflags & XFS_XFLAG_REALTIME) + di_flags |= XFS_DIFLAG_REALTIME; + if (xflags & XFS_XFLAG_EXTSIZE) + di_flags |= XFS_DIFLAG_EXTSIZE; + } + + ip->i_d.di_flags = di_flags; +} + + +#define FSX_PROJID 1 +#define FSX_EXTSIZE 2 +#define FSX_XFLAGS 4 +#define FSX_NONBLOCK 8 + +STATIC int +xfs_ioctl_setattr( + xfs_inode_t *ip, + struct fsxattr *fa, + int mask) +{ + struct xfs_mount *mp = ip->i_mount; + struct xfs_trans *tp; + unsigned int lock_flags = 0; + struct xfs_dquot *udqp = NULL, *gdqp = NULL; + struct xfs_dquot *olddquot = NULL; + int code; + + xfs_itrace_entry(ip); + + if (mp->m_flags & XFS_MOUNT_RDONLY) + return XFS_ERROR(EROFS); + if (XFS_FORCED_SHUTDOWN(mp)) + return XFS_ERROR(EIO); + + /* + * If disk quotas is on, we make sure that the dquots do exist on disk, + * before we start any other transactions. Trying to do this later + * is messy. We don't care to take a readlock to look at the ids + * in inode here, because we can't hold it across the trans_reserve. + * If the IDs do change before we take the ilock, we're covered + * because the i_*dquot fields will get updated anyway. + */ + if (XFS_IS_QUOTA_ON(mp) && (mask & FSX_PROJID)) { + code = XFS_QM_DQVOPALLOC(mp, ip, ip->i_d.di_uid, + ip->i_d.di_gid, fa->fsx_projid, + XFS_QMOPT_PQUOTA, &udqp, &gdqp); + if (code) + return code; + } + + /* + * For the other attributes, we acquire the inode lock and + * first do an error checking pass. + */ + tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE); + code = xfs_trans_reserve(tp, 0, XFS_ICHANGE_LOG_RES(mp), 0, 0, 0); + if (code) + goto error_return; + + lock_flags = XFS_ILOCK_EXCL; + xfs_ilock(ip, lock_flags); + + /* + * CAP_FOWNER overrides the following restrictions: + * + * The user ID of the calling process must be equal + * to the file owner ID, except in cases where the + * CAP_FSETID capability is applicable. + */ + if (current->fsuid != ip->i_d.di_uid && !capable(CAP_FOWNER)) { + code = XFS_ERROR(EPERM); + goto error_return; + } + + /* + * Do a quota reservation only if projid is actually going to change. + */ + if (mask & FSX_PROJID) { + if (XFS_IS_PQUOTA_ON(mp) && + ip->i_d.di_projid != fa->fsx_projid) { + ASSERT(tp); + code = XFS_QM_DQVOPCHOWNRESV(mp, tp, ip, udqp, gdqp, + capable(CAP_FOWNER) ? + XFS_QMOPT_FORCE_RES : 0); + if (code) /* out of quota */ + goto error_return; + } + } + + if (mask & FSX_EXTSIZE) { + /* + * Can't change extent size if any extents are allocated. + */ + if (ip->i_d.di_nextents && + ((ip->i_d.di_extsize << mp->m_sb.sb_blocklog) != + fa->fsx_extsize)) { + code = XFS_ERROR(EINVAL); /* EFBIG? */ + goto error_return; + } + + /* + * Extent size must be a multiple of the appropriate block + * size, if set at all. + */ + if (fa->fsx_extsize != 0) { + xfs_extlen_t size; + + if (XFS_IS_REALTIME_INODE(ip) || + ((mask & FSX_XFLAGS) && + (fa->fsx_xflags & XFS_XFLAG_REALTIME))) { + size = mp->m_sb.sb_rextsize << + mp->m_sb.sb_blocklog; + } else { + size = mp->m_sb.sb_blocksize; + } + + if (fa->fsx_extsize % size) { + code = XFS_ERROR(EINVAL); + goto error_return; + } + } + } + + + if (mask & FSX_XFLAGS) { + /* + * Can't change realtime flag if any extents are allocated. + */ + if ((ip->i_d.di_nextents || ip->i_delayed_blks) && + (XFS_IS_REALTIME_INODE(ip)) != + (fa->fsx_xflags & XFS_XFLAG_REALTIME)) { + code = XFS_ERROR(EINVAL); /* EFBIG? */ + goto error_return; + } + + /* + * If realtime flag is set then must have realtime data. + */ + if ((fa->fsx_xflags & XFS_XFLAG_REALTIME)) { + if ((mp->m_sb.sb_rblocks == 0) || + (mp->m_sb.sb_rextsize == 0) || + (ip->i_d.di_extsize % mp->m_sb.sb_rextsize)) { + code = XFS_ERROR(EINVAL); + goto error_return; + } + } + + /* + * Can't modify an immutable/append-only file unless + * we have appropriate permission. + */ + if ((ip->i_d.di_flags & + (XFS_DIFLAG_IMMUTABLE|XFS_DIFLAG_APPEND) || + (fa->fsx_xflags & + (XFS_XFLAG_IMMUTABLE | XFS_XFLAG_APPEND))) && + !capable(CAP_LINUX_IMMUTABLE)) { + code = XFS_ERROR(EPERM); + goto error_return; + } + } + + xfs_trans_ijoin(tp, ip, lock_flags); + xfs_trans_ihold(tp, ip); + + /* + * Change file ownership. Must be the owner or privileged. + * If the system was configured with the "restricted_chown" + * option, the owner is not permitted to give away the file, + * and can change the group id only to a group of which he + * or she is a member. + */ + if (mask & FSX_PROJID) { + /* + * CAP_FSETID overrides the following restrictions: + * + * The set-user-ID and set-group-ID bits of a file will be + * cleared upon successful return from chown() + */ + if ((ip->i_d.di_mode & (S_ISUID|S_ISGID)) && + !capable(CAP_FSETID)) + ip->i_d.di_mode &= ~(S_ISUID|S_ISGID); + + /* + * Change the ownerships and register quota modifications + * in the transaction. + */ + if (ip->i_d.di_projid != fa->fsx_projid) { + if (XFS_IS_PQUOTA_ON(mp)) { + olddquot = XFS_QM_DQVOPCHOWN(mp, tp, ip, + &ip->i_gdquot, gdqp); + } + ip->i_d.di_projid = fa->fsx_projid; + + /* + * We may have to rev the inode as well as + * the superblock version number since projids didn't + * exist before DINODE_VERSION_2 and SB_VERSION_NLINK. + */ + if (ip->i_d.di_version == XFS_DINODE_VERSION_1) + xfs_bump_ino_vers2(tp, ip); + } + + } + + if (mask & FSX_EXTSIZE) + ip->i_d.di_extsize = fa->fsx_extsize >> mp->m_sb.sb_blocklog; + if (mask & FSX_XFLAGS) + xfs_set_diflags(ip, fa->fsx_xflags); + + xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); + xfs_ichgtime(ip, XFS_ICHGTIME_CHG); + + XFS_STATS_INC(xs_ig_attrchg); + + /* + * If this is a synchronous mount, make sure that the + * transaction goes to disk before returning to the user. + * This is slightly sub-optimal in that truncates require + * two sync transactions instead of one for wsync filesystems. + * One for the truncate and one for the timestamps since we + * don't want to change the timestamps unless we're sure the + * truncate worked. Truncates are less than 1% of the laddis + * mix so this probably isn't worth the trouble to optimize. + */ + if (mp->m_flags & XFS_MOUNT_WSYNC) + xfs_trans_set_sync(tp); + code = xfs_trans_commit(tp, 0); + xfs_iunlock(ip, lock_flags); + + /* + * Release any dquot(s) the inode had kept before chown. + */ + XFS_QM_DQRELE(mp, olddquot); + XFS_QM_DQRELE(mp, udqp); + XFS_QM_DQRELE(mp, gdqp); + + if (code) + return code; + + if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE)) { + XFS_SEND_NAMESP(mp, DM_EVENT_ATTRIBUTE, ip, DM_RIGHT_NULL, + NULL, DM_RIGHT_NULL, NULL, NULL, 0, 0, + (mask & FSX_NONBLOCK) ? DM_FLAGS_NDELAY : 0); + } + + vn_revalidate(XFS_ITOV(ip)); /* update flags */ + return 0; + + error_return: + XFS_QM_DQRELE(mp, udqp); + XFS_QM_DQRELE(mp, gdqp); + xfs_trans_cancel(tp, 0); + if (lock_flags) + xfs_iunlock(ip, lock_flags); + return code; +} + STATIC int xfs_ioc_fssetxattr( xfs_inode_t *ip, @@ -886,31 +1179,16 @@ xfs_ioc_fssetxattr( void __user *arg) { struct fsxattr fa; - struct bhv_vattr *vattr; - int error; - int attr_flags; + unsigned int mask; if (copy_from_user(&fa, arg, sizeof(fa))) return -EFAULT; - vattr = kmalloc(sizeof(*vattr), GFP_KERNEL); - if (unlikely(!vattr)) - return -ENOMEM; - - attr_flags = 0; + mask = FSX_XFLAGS | FSX_EXTSIZE | FSX_PROJID; if (filp->f_flags & (O_NDELAY|O_NONBLOCK)) - attr_flags |= ATTR_NONBLOCK; + mask |= FSX_NONBLOCK; - vattr->va_mask = XFS_AT_XFLAGS | XFS_AT_EXTSIZE | XFS_AT_PROJID; - vattr->va_xflags = fa.fsx_xflags; - vattr->va_extsize = fa.fsx_extsize; - vattr->va_projid = fa.fsx_projid; - - error = -xfs_setattr(ip, vattr, attr_flags, NULL); - if (!error) - vn_revalidate(XFS_ITOV(ip)); /* update flags */ - kfree(vattr); - return 0; + return -xfs_ioctl_setattr(ip, &fa, mask); } STATIC int @@ -932,10 +1210,9 @@ xfs_ioc_setxflags( struct file *filp, void __user *arg) { - struct bhv_vattr *vattr; + struct fsxattr fa; unsigned int flags; - int attr_flags; - int error; + unsigned int mask; if (copy_from_user(&flags, arg, sizeof(flags))) return -EFAULT; @@ -945,22 +1222,12 @@ xfs_ioc_setxflags( FS_SYNC_FL)) return -EOPNOTSUPP; - vattr = kmalloc(sizeof(*vattr), GFP_KERNEL); - if (unlikely(!vattr)) - return -ENOMEM; - - attr_flags = 0; + mask = FSX_XFLAGS; if (filp->f_flags & (O_NDELAY|O_NONBLOCK)) - attr_flags |= ATTR_NONBLOCK; + mask |= FSX_NONBLOCK; + fa.fsx_xflags = xfs_merge_ioc_xflags(flags, xfs_ip2xflags(ip)); - vattr->va_mask = XFS_AT_XFLAGS; - vattr->va_xflags = xfs_merge_ioc_xflags(flags, xfs_ip2xflags(ip)); - - error = -xfs_setattr(ip, vattr, attr_flags, NULL); - if (likely(!error)) - vn_revalidate(XFS_ITOV(ip)); /* update flags */ - kfree(vattr); - return error; + return -xfs_ioctl_setattr(ip, &fa, mask); } STATIC int diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/linux-2.6/xfs_vnode.h index 25eb2a9e8d9..7797c9cdb59 100644 --- a/fs/xfs/linux-2.6/xfs_vnode.h +++ b/fs/xfs/linux-2.6/xfs_vnode.h @@ -117,26 +117,11 @@ typedef struct bhv_vattr { #define XFS_AT_ACL 0x00080000 #define XFS_AT_CAP 0x00100000 #define XFS_AT_INF 0x00200000 -#define XFS_AT_XFLAGS 0x00400000 -#define XFS_AT_EXTSIZE 0x00800000 #define XFS_AT_NEXTENTS 0x01000000 #define XFS_AT_ANEXTENTS 0x02000000 -#define XFS_AT_PROJID 0x04000000 #define XFS_AT_SIZE_NOPERM 0x08000000 #define XFS_AT_GENCOUNT 0x10000000 -#define XFS_AT_ALL (XFS_AT_TYPE|XFS_AT_MODE|XFS_AT_UID|XFS_AT_GID|\ - XFS_AT_FSID|XFS_AT_NODEID|XFS_AT_NLINK|XFS_AT_SIZE|\ - XFS_AT_ATIME|XFS_AT_MTIME|XFS_AT_CTIME|XFS_AT_RDEV|\ - XFS_AT_BLKSIZE|XFS_AT_NBLOCKS|XFS_AT_VCODE|XFS_AT_MAC|\ - XFS_AT_ACL|XFS_AT_CAP|XFS_AT_INF|XFS_AT_XFLAGS|XFS_AT_EXTSIZE|\ - XFS_AT_NEXTENTS|XFS_AT_ANEXTENTS|XFS_AT_PROJID|XFS_AT_GENCOUNT) - -#define XFS_AT_STAT (XFS_AT_TYPE|XFS_AT_MODE|XFS_AT_UID|XFS_AT_GID|\ - XFS_AT_FSID|XFS_AT_NODEID|XFS_AT_NLINK|XFS_AT_SIZE|\ - XFS_AT_ATIME|XFS_AT_MTIME|XFS_AT_CTIME|XFS_AT_RDEV|\ - XFS_AT_BLKSIZE|XFS_AT_NBLOCKS|XFS_AT_PROJID) - #define XFS_AT_TIMES (XFS_AT_ATIME|XFS_AT_MTIME|XFS_AT_CTIME) #define XFS_AT_UPDTIMES (XFS_AT_UPDATIME|XFS_AT_UPDMTIME|XFS_AT_UPDCTIME) diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 8297a8c5af9..ed399523b78 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -94,7 +94,6 @@ xfs_setattr( uid_t uid=0, iuid=0; gid_t gid=0, igid=0; int timeflags = 0; - xfs_prid_t projid=0, iprojid=0; struct xfs_dquot *udqp, *gdqp, *olddquot1, *olddquot2; int file_owner; int need_iolock = 1; @@ -139,8 +138,7 @@ xfs_setattr( * If the IDs do change before we take the ilock, we're covered * because the i_*dquot fields will get updated anyway. */ - if (XFS_IS_QUOTA_ON(mp) && - (mask & (XFS_AT_UID|XFS_AT_GID|XFS_AT_PROJID))) { + if (XFS_IS_QUOTA_ON(mp) && (mask & (XFS_AT_UID|XFS_AT_GID))) { uint qflags = 0; if ((mask & XFS_AT_UID) && XFS_IS_UQUOTA_ON(mp)) { @@ -155,12 +153,7 @@ xfs_setattr( } else { gid = ip->i_d.di_gid; } - if ((mask & XFS_AT_PROJID) && XFS_IS_PQUOTA_ON(mp)) { - projid = vap->va_projid; - qflags |= XFS_QMOPT_PQUOTA; - } else { - projid = ip->i_d.di_projid; - } + /* * We take a reference when we initialize udqp and gdqp, * so it is important that we never blindly double trip on @@ -168,8 +161,8 @@ xfs_setattr( */ ASSERT(udqp == NULL); ASSERT(gdqp == NULL); - code = XFS_QM_DQVOPALLOC(mp, ip, uid, gid, projid, qflags, - &udqp, &gdqp); + code = XFS_QM_DQVOPALLOC(mp, ip, uid, gid, ip->i_d.di_projid, + qflags, &udqp, &gdqp); if (code) return code; } @@ -219,9 +212,7 @@ xfs_setattr( * Only the owner or users with CAP_FOWNER * capability may do these things. */ - if (mask & - (XFS_AT_MODE|XFS_AT_XFLAGS|XFS_AT_EXTSIZE|XFS_AT_UID| - XFS_AT_GID|XFS_AT_PROJID)) { + if (mask & (XFS_AT_MODE|XFS_AT_UID|XFS_AT_GID)) { /* * CAP_FOWNER overrides the following restrictions: * @@ -270,7 +261,7 @@ xfs_setattr( * and can change the group id only to a group of which he * or she is a member. */ - if (mask & (XFS_AT_UID|XFS_AT_GID|XFS_AT_PROJID)) { + if (mask & (XFS_AT_UID|XFS_AT_GID)) { /* * These IDs could have changed since we last looked at them. * But, we're assured that if the ownership did change @@ -278,12 +269,9 @@ xfs_setattr( * would have changed also. */ iuid = ip->i_d.di_uid; - iprojid = ip->i_d.di_projid; igid = ip->i_d.di_gid; gid = (mask & XFS_AT_GID) ? vap->va_gid : igid; uid = (mask & XFS_AT_UID) ? vap->va_uid : iuid; - projid = (mask & XFS_AT_PROJID) ? (xfs_prid_t)vap->va_projid : - iprojid; /* * CAP_CHOWN overrides the following restrictions: @@ -303,11 +291,10 @@ xfs_setattr( goto error_return; } /* - * Do a quota reservation only if uid/projid/gid is actually + * Do a quota reservation only if uid/gid is actually * going to change. */ if ((XFS_IS_UQUOTA_ON(mp) && iuid != uid) || - (XFS_IS_PQUOTA_ON(mp) && iprojid != projid) || (XFS_IS_GQUOTA_ON(mp) && igid != gid)) { ASSERT(tp); code = XFS_QM_DQVOPCHOWNRESV(mp, tp, ip, udqp, gdqp, @@ -360,78 +347,6 @@ xfs_setattr( } } - /* - * Change extent size or realtime flag. - */ - if (mask & (XFS_AT_EXTSIZE|XFS_AT_XFLAGS)) { - /* - * Can't change extent size if any extents are allocated. - */ - if (ip->i_d.di_nextents && (mask & XFS_AT_EXTSIZE) && - ((ip->i_d.di_extsize << mp->m_sb.sb_blocklog) != - vap->va_extsize) ) { - code = XFS_ERROR(EINVAL); /* EFBIG? */ - goto error_return; - } - - /* - * Can't change realtime flag if any extents are allocated. - */ - if ((ip->i_d.di_nextents || ip->i_delayed_blks) && - (mask & XFS_AT_XFLAGS) && - (XFS_IS_REALTIME_INODE(ip)) != - (vap->va_xflags & XFS_XFLAG_REALTIME)) { - code = XFS_ERROR(EINVAL); /* EFBIG? */ - goto error_return; - } - /* - * Extent size must be a multiple of the appropriate block - * size, if set at all. - */ - if ((mask & XFS_AT_EXTSIZE) && vap->va_extsize != 0) { - xfs_extlen_t size; - - if (XFS_IS_REALTIME_INODE(ip) || - ((mask & XFS_AT_XFLAGS) && - (vap->va_xflags & XFS_XFLAG_REALTIME))) { - size = mp->m_sb.sb_rextsize << - mp->m_sb.sb_blocklog; - } else { - size = mp->m_sb.sb_blocksize; - } - if (vap->va_extsize % size) { - code = XFS_ERROR(EINVAL); - goto error_return; - } - } - /* - * If realtime flag is set then must have realtime data. - */ - if ((mask & XFS_AT_XFLAGS) && - (vap->va_xflags & XFS_XFLAG_REALTIME)) { - if ((mp->m_sb.sb_rblocks == 0) || - (mp->m_sb.sb_rextsize == 0) || - (ip->i_d.di_extsize % mp->m_sb.sb_rextsize)) { - code = XFS_ERROR(EINVAL); - goto error_return; - } - } - - /* - * Can't modify an immutable/append-only file unless - * we have appropriate permission. - */ - if ((mask & XFS_AT_XFLAGS) && - (ip->i_d.di_flags & - (XFS_DIFLAG_IMMUTABLE|XFS_DIFLAG_APPEND) || - (vap->va_xflags & - (XFS_XFLAG_IMMUTABLE | XFS_XFLAG_APPEND))) && - !capable(CAP_LINUX_IMMUTABLE)) { - code = XFS_ERROR(EPERM); - goto error_return; - } - } - /* * Now we can make the changes. Before we join the inode * to the transaction, if XFS_AT_SIZE is set then take care of @@ -568,7 +483,7 @@ xfs_setattr( * and can change the group id only to a group of which he * or she is a member. */ - if (mask & (XFS_AT_UID|XFS_AT_GID|XFS_AT_PROJID)) { + if (mask & (XFS_AT_UID|XFS_AT_GID)) { /* * CAP_FSETID overrides the following restrictions: * @@ -603,23 +518,6 @@ xfs_setattr( } ip->i_d.di_gid = gid; } - if (iprojid != projid) { - if (XFS_IS_PQUOTA_ON(mp)) { - ASSERT(!XFS_IS_GQUOTA_ON(mp)); - ASSERT(mask & XFS_AT_PROJID); - ASSERT(gdqp); - olddquot2 = XFS_QM_DQVOPCHOWN(mp, tp, ip, - &ip->i_gdquot, gdqp); - } - ip->i_d.di_projid = projid; - /* - * We may have to rev the inode as well as - * the superblock version number since projids didn't - * exist before DINODE_VERSION_2 and SB_VERSION_NLINK. - */ - if (ip->i_d.di_version == XFS_DINODE_VERSION_1) - xfs_bump_ino_vers2(tp, ip); - } xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE); timeflags |= XFS_ICHGTIME_CHG; @@ -646,57 +544,6 @@ xfs_setattr( xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE); } - /* - * Change XFS-added attributes. - */ - if (mask & (XFS_AT_EXTSIZE|XFS_AT_XFLAGS)) { - if (mask & XFS_AT_EXTSIZE) { - /* - * Converting bytes to fs blocks. - */ - ip->i_d.di_extsize = vap->va_extsize >> - mp->m_sb.sb_blocklog; - } - if (mask & XFS_AT_XFLAGS) { - uint di_flags; - - /* can't set PREALLOC this way, just preserve it */ - di_flags = (ip->i_d.di_flags & XFS_DIFLAG_PREALLOC); - if (vap->va_xflags & XFS_XFLAG_IMMUTABLE) - di_flags |= XFS_DIFLAG_IMMUTABLE; - if (vap->va_xflags & XFS_XFLAG_APPEND) - di_flags |= XFS_DIFLAG_APPEND; - if (vap->va_xflags & XFS_XFLAG_SYNC) - di_flags |= XFS_DIFLAG_SYNC; - if (vap->va_xflags & XFS_XFLAG_NOATIME) - di_flags |= XFS_DIFLAG_NOATIME; - if (vap->va_xflags & XFS_XFLAG_NODUMP) - di_flags |= XFS_DIFLAG_NODUMP; - if (vap->va_xflags & XFS_XFLAG_PROJINHERIT) - di_flags |= XFS_DIFLAG_PROJINHERIT; - if (vap->va_xflags & XFS_XFLAG_NODEFRAG) - di_flags |= XFS_DIFLAG_NODEFRAG; - if (vap->va_xflags & XFS_XFLAG_FILESTREAM) - di_flags |= XFS_DIFLAG_FILESTREAM; - if ((ip->i_d.di_mode & S_IFMT) == S_IFDIR) { - if (vap->va_xflags & XFS_XFLAG_RTINHERIT) - di_flags |= XFS_DIFLAG_RTINHERIT; - if (vap->va_xflags & XFS_XFLAG_NOSYMLINKS) - di_flags |= XFS_DIFLAG_NOSYMLINKS; - if (vap->va_xflags & XFS_XFLAG_EXTSZINHERIT) - di_flags |= XFS_DIFLAG_EXTSZINHERIT; - } else if ((ip->i_d.di_mode & S_IFMT) == S_IFREG) { - if (vap->va_xflags & XFS_XFLAG_REALTIME) - di_flags |= XFS_DIFLAG_REALTIME; - if (vap->va_xflags & XFS_XFLAG_EXTSIZE) - di_flags |= XFS_DIFLAG_EXTSIZE; - } - ip->i_d.di_flags = di_flags; - } - xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); - timeflags |= XFS_ICHGTIME_CHG; - } - /* * Change file inode change time only if XFS_AT_CTIME set * AND we have been called by a DMI function. -- GitLab From 0f285c8a1c4cacfd9f2aec077b06e2b537ee57ab Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 18 Jul 2008 17:13:28 +1000 Subject: [PATCH 0177/1024] [XFS] Now that xfs_setattr is only used for attributes set from ->setattr it can be switched to take struct iattr directly and thus simplify the implementation greatly. Also rename the ATTR_ flags to XFS_ATTR_ to not conflict with the ATTR_ flags used by the VFS. SGI-PV: 984565 SGI-Modid: xfs-linux-melb:xfs-kern:31678a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_ioctl.c | 4 +- fs/xfs/linux-2.6/xfs_iops.c | 56 +++--------- fs/xfs/linux-2.6/xfs_vnode.h | 73 --------------- fs/xfs/xfs_acl.c | 18 ++-- fs/xfs/xfs_dmapi.h | 2 +- fs/xfs/xfs_vnodeops.c | 172 +++++++++++++++-------------------- fs/xfs/xfs_vnodeops.h | 8 +- 7 files changed, 102 insertions(+), 231 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index d2bbb0532ef..d1b0da6bcdc 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -688,9 +688,9 @@ xfs_ioc_space( return -XFS_ERROR(EFAULT); if (filp->f_flags & (O_NDELAY|O_NONBLOCK)) - attr_flags |= ATTR_NONBLOCK; + attr_flags |= XFS_ATTR_NONBLOCK; if (ioflags & IO_INVIS) - attr_flags |= ATTR_DMI; + attr_flags |= XFS_ATTR_DMI; error = xfs_change_file_space(ip, cmd, &bf, filp->f_pos, NULL, attr_flags); diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 7b42569968f..669bbdc2085 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -648,54 +648,20 @@ xfs_vn_getattr( STATIC int xfs_vn_setattr( struct dentry *dentry, - struct iattr *attr) + struct iattr *iattr) { struct inode *inode = dentry->d_inode; - unsigned int ia_valid = attr->ia_valid; - bhv_vattr_t vattr = { 0 }; - int flags = 0; int error; - if (ia_valid & ATTR_UID) { - vattr.va_mask |= XFS_AT_UID; - vattr.va_uid = attr->ia_uid; - } - if (ia_valid & ATTR_GID) { - vattr.va_mask |= XFS_AT_GID; - vattr.va_gid = attr->ia_gid; - } - if (ia_valid & ATTR_SIZE) { - vattr.va_mask |= XFS_AT_SIZE; - vattr.va_size = attr->ia_size; - } - if (ia_valid & ATTR_ATIME) { - vattr.va_mask |= XFS_AT_ATIME; - vattr.va_atime = attr->ia_atime; - inode->i_atime = attr->ia_atime; - } - if (ia_valid & ATTR_MTIME) { - vattr.va_mask |= XFS_AT_MTIME; - vattr.va_mtime = attr->ia_mtime; - } - if (ia_valid & ATTR_CTIME) { - vattr.va_mask |= XFS_AT_CTIME; - vattr.va_ctime = attr->ia_ctime; - } - if (ia_valid & ATTR_MODE) { - vattr.va_mask |= XFS_AT_MODE; - vattr.va_mode = attr->ia_mode; + if (iattr->ia_valid & ATTR_ATIME) + inode->i_atime = iattr->ia_atime; + + if (iattr->ia_valid & ATTR_MODE) { if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) inode->i_mode &= ~S_ISGID; } - if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET)) - flags |= ATTR_UTIME; -#ifdef ATTR_NO_BLOCK - if ((ia_valid & ATTR_NO_BLOCK)) - flags |= ATTR_NONBLOCK; -#endif - - error = xfs_setattr(XFS_I(inode), &vattr, flags, NULL); + error = xfs_setattr(XFS_I(inode), iattr, 0, NULL); if (likely(!error)) vn_revalidate(vn_from_inode(inode)); return -error; @@ -739,18 +705,18 @@ xfs_vn_fallocate( xfs_ilock(ip, XFS_IOLOCK_EXCL); error = xfs_change_file_space(ip, XFS_IOC_RESVSP, &bf, - 0, NULL, ATTR_NOLOCK); + 0, NULL, XFS_ATTR_NOLOCK); if (!error && !(mode & FALLOC_FL_KEEP_SIZE) && offset + len > i_size_read(inode)) new_size = offset + len; /* Change file size if needed */ if (new_size) { - bhv_vattr_t va; + struct iattr iattr; - va.va_mask = XFS_AT_SIZE; - va.va_size = new_size; - error = xfs_setattr(ip, &va, ATTR_NOLOCK, NULL); + iattr.ia_valid = ATTR_SIZE; + iattr.ia_size = new_size; + error = xfs_setattr(ip, &iattr, XFS_ATTR_NOLOCK, NULL); } xfs_iunlock(ip, XFS_IOLOCK_EXCL); diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/linux-2.6/xfs_vnode.h index 7797c9cdb59..96e4a7b5391 100644 --- a/fs/xfs/linux-2.6/xfs_vnode.h +++ b/fs/xfs/linux-2.6/xfs_vnode.h @@ -19,7 +19,6 @@ #define __XFS_VNODE_H__ struct file; -struct bhv_vattr; struct xfs_iomap; struct attrlist_cursor_kern; @@ -66,69 +65,6 @@ static inline struct inode *vn_to_inode(bhv_vnode_t *vnode) Prevent VM access to the pages until the operation completes. */ -/* - * Vnode attributes. va_mask indicates those attributes the caller - * wants to set or extract. - */ -typedef struct bhv_vattr { - int va_mask; /* bit-mask of attributes present */ - mode_t va_mode; /* file access mode and type */ - xfs_nlink_t va_nlink; /* number of references to file */ - uid_t va_uid; /* owner user id */ - gid_t va_gid; /* owner group id */ - xfs_ino_t va_nodeid; /* file id */ - xfs_off_t va_size; /* file size in bytes */ - u_long va_blocksize; /* blocksize preferred for i/o */ - struct timespec va_atime; /* time of last access */ - struct timespec va_mtime; /* time of last modification */ - struct timespec va_ctime; /* time file changed */ - u_int va_gen; /* generation number of file */ - xfs_dev_t va_rdev; /* device the special file represents */ - __int64_t va_nblocks; /* number of blocks allocated */ - u_long va_xflags; /* random extended file flags */ - u_long va_extsize; /* file extent size */ - u_long va_nextents; /* number of extents in file */ - u_long va_anextents; /* number of attr extents in file */ - prid_t va_projid; /* project id */ -} bhv_vattr_t; - -/* - * setattr or getattr attributes - */ -#define XFS_AT_TYPE 0x00000001 -#define XFS_AT_MODE 0x00000002 -#define XFS_AT_UID 0x00000004 -#define XFS_AT_GID 0x00000008 -#define XFS_AT_FSID 0x00000010 -#define XFS_AT_NODEID 0x00000020 -#define XFS_AT_NLINK 0x00000040 -#define XFS_AT_SIZE 0x00000080 -#define XFS_AT_ATIME 0x00000100 -#define XFS_AT_MTIME 0x00000200 -#define XFS_AT_CTIME 0x00000400 -#define XFS_AT_RDEV 0x00000800 -#define XFS_AT_BLKSIZE 0x00001000 -#define XFS_AT_NBLOCKS 0x00002000 -#define XFS_AT_VCODE 0x00004000 -#define XFS_AT_MAC 0x00008000 -#define XFS_AT_UPDATIME 0x00010000 -#define XFS_AT_UPDMTIME 0x00020000 -#define XFS_AT_UPDCTIME 0x00040000 -#define XFS_AT_ACL 0x00080000 -#define XFS_AT_CAP 0x00100000 -#define XFS_AT_INF 0x00200000 -#define XFS_AT_NEXTENTS 0x01000000 -#define XFS_AT_ANEXTENTS 0x02000000 -#define XFS_AT_SIZE_NOPERM 0x08000000 -#define XFS_AT_GENCOUNT 0x10000000 - -#define XFS_AT_TIMES (XFS_AT_ATIME|XFS_AT_MTIME|XFS_AT_CTIME) - -#define XFS_AT_UPDTIMES (XFS_AT_UPDATIME|XFS_AT_UPDMTIME|XFS_AT_UPDCTIME) - -#define XFS_AT_NOSET (XFS_AT_NLINK|XFS_AT_RDEV|XFS_AT_FSID|XFS_AT_NODEID|\ - XFS_AT_TYPE|XFS_AT_BLKSIZE|XFS_AT_NBLOCKS|XFS_AT_VCODE|\ - XFS_AT_NEXTENTS|XFS_AT_ANEXTENTS|XFS_AT_GENCOUNT) extern void vn_init(void); extern int vn_revalidate(bhv_vnode_t *); @@ -204,15 +140,6 @@ static inline void vn_atime_to_time_t(bhv_vnode_t *vp, time_t *tt) #define VN_DIRTY(vp) mapping_tagged(vn_to_inode(vp)->i_mapping, \ PAGECACHE_TAG_DIRTY) -/* - * Flags to vop_setattr/getattr. - */ -#define ATTR_UTIME 0x01 /* non-default utime(2) request */ -#define ATTR_DMI 0x08 /* invocation from a DMI function */ -#define ATTR_LAZY 0x80 /* set/get attributes lazily */ -#define ATTR_NONBLOCK 0x100 /* return EAGAIN if operation would block */ -#define ATTR_NOLOCK 0x200 /* Don't grab any conflicting locks */ -#define ATTR_NOSIZETOK 0x400 /* Don't get the SIZE token */ /* * Tracking vnode activity. diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c index 93057af2fe3..3e4648ad9cf 100644 --- a/fs/xfs/xfs_acl.c +++ b/fs/xfs/xfs_acl.c @@ -719,7 +719,7 @@ xfs_acl_setmode( xfs_acl_t *acl, int *basicperms) { - bhv_vattr_t va; + struct iattr iattr; xfs_acl_entry_t *ap; xfs_acl_entry_t *gap = NULL; int i, nomask = 1; @@ -733,25 +733,25 @@ xfs_acl_setmode( * Copy the u::, g::, o::, and m:: bits from the ACL into the * mode. The m:: bits take precedence over the g:: bits. */ - va.va_mask = XFS_AT_MODE; - va.va_mode = xfs_vtoi(vp)->i_d.di_mode; - va.va_mode &= ~(S_IRWXU|S_IRWXG|S_IRWXO); + iattr.ia_valid = ATTR_MODE; + iattr.ia_mode = xfs_vtoi(vp)->i_d.di_mode; + iattr.ia_mode &= ~(S_IRWXU|S_IRWXG|S_IRWXO); ap = acl->acl_entry; for (i = 0; i < acl->acl_cnt; ++i) { switch (ap->ae_tag) { case ACL_USER_OBJ: - va.va_mode |= ap->ae_perm << 6; + iattr.ia_mode |= ap->ae_perm << 6; break; case ACL_GROUP_OBJ: gap = ap; break; case ACL_MASK: /* more than just standard modes */ nomask = 0; - va.va_mode |= ap->ae_perm << 3; + iattr.ia_mode |= ap->ae_perm << 3; *basicperms = 0; break; case ACL_OTHER: - va.va_mode |= ap->ae_perm; + iattr.ia_mode |= ap->ae_perm; break; default: /* more than just standard modes */ *basicperms = 0; @@ -762,9 +762,9 @@ xfs_acl_setmode( /* Set the group bits from ACL_GROUP_OBJ if there's no ACL_MASK */ if (gap && nomask) - va.va_mode |= gap->ae_perm << 3; + iattr.ia_mode |= gap->ae_perm << 3; - return xfs_setattr(xfs_vtoi(vp), &va, 0, sys_cred); + return xfs_setattr(xfs_vtoi(vp), &iattr, 0, sys_cred); } /* diff --git a/fs/xfs/xfs_dmapi.h b/fs/xfs/xfs_dmapi.h index f71784ab6a6..cdc2d3464a1 100644 --- a/fs/xfs/xfs_dmapi.h +++ b/fs/xfs/xfs_dmapi.h @@ -166,6 +166,6 @@ typedef enum { #define FILP_DELAY_FLAG(filp) ((filp->f_flags&(O_NDELAY|O_NONBLOCK)) ? \ DM_FLAGS_NDELAY : 0) -#define AT_DELAY_FLAG(f) ((f&ATTR_NONBLOCK) ? DM_FLAGS_NDELAY : 0) +#define AT_DELAY_FLAG(f) ((f & XFS_ATTR_NONBLOCK) ? DM_FLAGS_NDELAY : 0) #endif /* __XFS_DMAPI_H__ */ diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index ed399523b78..b792a121b1a 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -75,19 +75,16 @@ xfs_open( return 0; } -/* - * xfs_setattr - */ int xfs_setattr( - xfs_inode_t *ip, - bhv_vattr_t *vap, + struct xfs_inode *ip, + struct iattr *iattr, int flags, cred_t *credp) { xfs_mount_t *mp = ip->i_mount; + int mask = iattr->ia_valid; xfs_trans_t *tp; - int mask; int code; uint lock_flags; uint commit_flags=0; @@ -103,30 +100,9 @@ xfs_setattr( if (mp->m_flags & XFS_MOUNT_RDONLY) return XFS_ERROR(EROFS); - /* - * Cannot set certain attributes. - */ - mask = vap->va_mask; - if (mask & XFS_AT_NOSET) { - return XFS_ERROR(EINVAL); - } - if (XFS_FORCED_SHUTDOWN(mp)) return XFS_ERROR(EIO); - /* - * Timestamps do not need to be logged and hence do not - * need to be done within a transaction. - */ - if (mask & XFS_AT_UPDTIMES) { - ASSERT((mask & ~XFS_AT_UPDTIMES) == 0); - timeflags = ((mask & XFS_AT_UPDATIME) ? XFS_ICHGTIME_ACC : 0) | - ((mask & XFS_AT_UPDCTIME) ? XFS_ICHGTIME_CHG : 0) | - ((mask & XFS_AT_UPDMTIME) ? XFS_ICHGTIME_MOD : 0); - xfs_ichgtime(ip, timeflags); - return 0; - } - olddquot1 = olddquot2 = NULL; udqp = gdqp = NULL; @@ -138,17 +114,17 @@ xfs_setattr( * If the IDs do change before we take the ilock, we're covered * because the i_*dquot fields will get updated anyway. */ - if (XFS_IS_QUOTA_ON(mp) && (mask & (XFS_AT_UID|XFS_AT_GID))) { + if (XFS_IS_QUOTA_ON(mp) && (mask & (ATTR_UID|ATTR_GID))) { uint qflags = 0; - if ((mask & XFS_AT_UID) && XFS_IS_UQUOTA_ON(mp)) { - uid = vap->va_uid; + if ((mask & ATTR_UID) && XFS_IS_UQUOTA_ON(mp)) { + uid = iattr->ia_uid; qflags |= XFS_QMOPT_UQUOTA; } else { uid = ip->i_d.di_uid; } - if ((mask & XFS_AT_GID) && XFS_IS_GQUOTA_ON(mp)) { - gid = vap->va_gid; + if ((mask & ATTR_GID) && XFS_IS_GQUOTA_ON(mp)) { + gid = iattr->ia_gid; qflags |= XFS_QMOPT_GQUOTA; } else { gid = ip->i_d.di_gid; @@ -173,10 +149,10 @@ xfs_setattr( */ tp = NULL; lock_flags = XFS_ILOCK_EXCL; - if (flags & ATTR_NOLOCK) + if (flags & XFS_ATTR_NOLOCK) need_iolock = 0; - if (!(mask & XFS_AT_SIZE)) { - if ((mask != (XFS_AT_CTIME|XFS_AT_ATIME|XFS_AT_MTIME)) || + if (!(mask & ATTR_SIZE)) { + if ((mask != (ATTR_CTIME|ATTR_ATIME|ATTR_MTIME)) || (mp->m_flags & XFS_MOUNT_WSYNC)) { tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE); commit_flags = 0; @@ -189,10 +165,10 @@ xfs_setattr( } } else { if (DM_EVENT_ENABLED(ip, DM_EVENT_TRUNCATE) && - !(flags & ATTR_DMI)) { + !(flags & XFS_ATTR_DMI)) { int dmflags = AT_DELAY_FLAG(flags) | DM_SEM_FLAG_WR; code = XFS_SEND_DATA(mp, DM_EVENT_TRUNCATE, ip, - vap->va_size, 0, dmflags, NULL); + iattr->ia_size, 0, dmflags, NULL); if (code) { lock_flags = 0; goto error_return; @@ -212,7 +188,7 @@ xfs_setattr( * Only the owner or users with CAP_FOWNER * capability may do these things. */ - if (mask & (XFS_AT_MODE|XFS_AT_UID|XFS_AT_GID)) { + if (mask & (ATTR_MODE|ATTR_UID|ATTR_GID)) { /* * CAP_FOWNER overrides the following restrictions: * @@ -236,21 +212,21 @@ xfs_setattr( * IDs of the calling process shall match the group owner of * the file when setting the set-group-ID bit on that file */ - if (mask & XFS_AT_MODE) { + if (mask & ATTR_MODE) { mode_t m = 0; - if ((vap->va_mode & S_ISUID) && !file_owner) + if ((iattr->ia_mode & S_ISUID) && !file_owner) m |= S_ISUID; - if ((vap->va_mode & S_ISGID) && + if ((iattr->ia_mode & S_ISGID) && !in_group_p((gid_t)ip->i_d.di_gid)) m |= S_ISGID; #if 0 /* Linux allows this, Irix doesn't. */ - if ((vap->va_mode & S_ISVTX) && !S_ISDIR(ip->i_d.di_mode)) + if ((iattr->ia_mode & S_ISVTX) && !S_ISDIR(ip->i_d.di_mode)) m |= S_ISVTX; #endif if (m && !capable(CAP_FSETID)) - vap->va_mode &= ~m; + iattr->ia_mode &= ~m; } } @@ -261,7 +237,7 @@ xfs_setattr( * and can change the group id only to a group of which he * or she is a member. */ - if (mask & (XFS_AT_UID|XFS_AT_GID)) { + if (mask & (ATTR_UID|ATTR_GID)) { /* * These IDs could have changed since we last looked at them. * But, we're assured that if the ownership did change @@ -270,8 +246,8 @@ xfs_setattr( */ iuid = ip->i_d.di_uid; igid = ip->i_d.di_gid; - gid = (mask & XFS_AT_GID) ? vap->va_gid : igid; - uid = (mask & XFS_AT_UID) ? vap->va_uid : iuid; + gid = (mask & ATTR_GID) ? iattr->ia_gid : igid; + uid = (mask & ATTR_UID) ? iattr->ia_uid : iuid; /* * CAP_CHOWN overrides the following restrictions: @@ -308,13 +284,13 @@ xfs_setattr( /* * Truncate file. Must have write permission and not be a directory. */ - if (mask & XFS_AT_SIZE) { + if (mask & ATTR_SIZE) { /* Short circuit the truncate case for zero length files */ - if ((vap->va_size == 0) && - (ip->i_size == 0) && (ip->i_d.di_nextents == 0)) { + if (iattr->ia_size == 0 && + ip->i_size == 0 && ip->i_d.di_nextents == 0) { xfs_iunlock(ip, XFS_ILOCK_EXCL); lock_flags &= ~XFS_ILOCK_EXCL; - if (mask & XFS_AT_CTIME) + if (mask & ATTR_CTIME) xfs_ichgtime(ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG); code = 0; goto error_return; @@ -337,9 +313,9 @@ xfs_setattr( /* * Change file access or modified times. */ - if (mask & (XFS_AT_ATIME|XFS_AT_MTIME)) { + if (mask & (ATTR_ATIME|ATTR_MTIME)) { if (!file_owner) { - if ((flags & ATTR_UTIME) && + if ((mask & (ATTR_MTIME_SET|ATTR_ATIME_SET)) && !capable(CAP_FOWNER)) { code = XFS_ERROR(EPERM); goto error_return; @@ -349,23 +325,22 @@ xfs_setattr( /* * Now we can make the changes. Before we join the inode - * to the transaction, if XFS_AT_SIZE is set then take care of + * to the transaction, if ATTR_SIZE is set then take care of * the part of the truncation that must be done without the * inode lock. This needs to be done before joining the inode * to the transaction, because the inode cannot be unlocked * once it is a part of the transaction. */ - if (mask & XFS_AT_SIZE) { + if (mask & ATTR_SIZE) { code = 0; - if ((vap->va_size > ip->i_size) && - (flags & ATTR_NOSIZETOK) == 0) { + if (iattr->ia_size > ip->i_size) { /* * Do the first part of growing a file: zero any data * in the last block that is beyond the old EOF. We * need to do this before the inode is joined to the * transaction to modify the i_size. */ - code = xfs_zero_eof(ip, vap->va_size, ip->i_size); + code = xfs_zero_eof(ip, iattr->ia_size, ip->i_size); } xfs_iunlock(ip, XFS_ILOCK_EXCL); @@ -382,10 +357,10 @@ xfs_setattr( * not within the range we care about here. */ if (!code && - (ip->i_size != ip->i_d.di_size) && - (vap->va_size > ip->i_d.di_size)) { + ip->i_size != ip->i_d.di_size && + iattr->ia_size > ip->i_d.di_size) { code = xfs_flush_pages(ip, - ip->i_d.di_size, vap->va_size, + ip->i_d.di_size, iattr->ia_size, XFS_B_ASYNC, FI_NONE); } @@ -393,7 +368,7 @@ xfs_setattr( vn_iowait(ip); if (!code) - code = xfs_itruncate_data(ip, vap->va_size); + code = xfs_itruncate_data(ip, iattr->ia_size); if (code) { ASSERT(tp == NULL); lock_flags &= ~XFS_ILOCK_EXCL; @@ -422,31 +397,30 @@ xfs_setattr( /* * Truncate file. Must have write permission and not be a directory. */ - if (mask & XFS_AT_SIZE) { + if (mask & ATTR_SIZE) { /* * Only change the c/mtime if we are changing the size * or we are explicitly asked to change it. This handles * the semantic difference between truncate() and ftruncate() * as implemented in the VFS. */ - if (vap->va_size != ip->i_size || (mask & XFS_AT_CTIME)) + if (iattr->ia_size != ip->i_size || (mask & ATTR_CTIME)) timeflags |= XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG; - if (vap->va_size > ip->i_size) { - ip->i_d.di_size = vap->va_size; - ip->i_size = vap->va_size; - if (!(flags & ATTR_DMI)) + if (iattr->ia_size > ip->i_size) { + ip->i_d.di_size = iattr->ia_size; + ip->i_size = iattr->ia_size; + if (!(flags & XFS_ATTR_DMI)) xfs_ichgtime(ip, XFS_ICHGTIME_CHG); xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); - } else if ((vap->va_size <= ip->i_size) || - ((vap->va_size == 0) && ip->i_d.di_nextents)) { + } else if (iattr->ia_size <= ip->i_size || + (iattr->ia_size == 0 && ip->i_d.di_nextents)) { /* * signal a sync transaction unless * we're truncating an already unlinked * file on a wsync filesystem */ - code = xfs_itruncate_finish(&tp, ip, - (xfs_fsize_t)vap->va_size, + code = xfs_itruncate_finish(&tp, ip, iattr->ia_size, XFS_DATA_FORK, ((ip->i_d.di_nlink != 0 || !(mp->m_flags & XFS_MOUNT_WSYNC)) @@ -468,9 +442,9 @@ xfs_setattr( /* * Change file access modes. */ - if (mask & XFS_AT_MODE) { + if (mask & ATTR_MODE) { ip->i_d.di_mode &= S_IFMT; - ip->i_d.di_mode |= vap->va_mode & ~S_IFMT; + ip->i_d.di_mode |= iattr->ia_mode & ~S_IFMT; xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE); timeflags |= XFS_ICHGTIME_CHG; @@ -483,7 +457,7 @@ xfs_setattr( * and can change the group id only to a group of which he * or she is a member. */ - if (mask & (XFS_AT_UID|XFS_AT_GID)) { + if (mask & (ATTR_UID|ATTR_GID)) { /* * CAP_FSETID overrides the following restrictions: * @@ -501,7 +475,7 @@ xfs_setattr( */ if (iuid != uid) { if (XFS_IS_UQUOTA_ON(mp)) { - ASSERT(mask & XFS_AT_UID); + ASSERT(mask & ATTR_UID); ASSERT(udqp); olddquot1 = XFS_QM_DQVOPCHOWN(mp, tp, ip, &ip->i_udquot, udqp); @@ -511,7 +485,7 @@ xfs_setattr( if (igid != gid) { if (XFS_IS_GQUOTA_ON(mp)) { ASSERT(!XFS_IS_PQUOTA_ON(mp)); - ASSERT(mask & XFS_AT_GID); + ASSERT(mask & ATTR_GID); ASSERT(gdqp); olddquot2 = XFS_QM_DQVOPCHOWN(mp, tp, ip, &ip->i_gdquot, gdqp); @@ -527,31 +501,31 @@ xfs_setattr( /* * Change file access or modified times. */ - if (mask & (XFS_AT_ATIME|XFS_AT_MTIME)) { - if (mask & XFS_AT_ATIME) { - ip->i_d.di_atime.t_sec = vap->va_atime.tv_sec; - ip->i_d.di_atime.t_nsec = vap->va_atime.tv_nsec; + if (mask & (ATTR_ATIME|ATTR_MTIME)) { + if (mask & ATTR_ATIME) { + ip->i_d.di_atime.t_sec = iattr->ia_atime.tv_sec; + ip->i_d.di_atime.t_nsec = iattr->ia_atime.tv_nsec; ip->i_update_core = 1; timeflags &= ~XFS_ICHGTIME_ACC; } - if (mask & XFS_AT_MTIME) { - ip->i_d.di_mtime.t_sec = vap->va_mtime.tv_sec; - ip->i_d.di_mtime.t_nsec = vap->va_mtime.tv_nsec; + if (mask & ATTR_MTIME) { + ip->i_d.di_mtime.t_sec = iattr->ia_mtime.tv_sec; + ip->i_d.di_mtime.t_nsec = iattr->ia_mtime.tv_nsec; timeflags &= ~XFS_ICHGTIME_MOD; timeflags |= XFS_ICHGTIME_CHG; } - if (tp && (flags & ATTR_UTIME)) + if (tp && (mask & (ATTR_MTIME_SET|ATTR_ATIME_SET))) xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE); } /* - * Change file inode change time only if XFS_AT_CTIME set + * Change file inode change time only if ATTR_CTIME set * AND we have been called by a DMI function. */ - if ( (flags & ATTR_DMI) && (mask & XFS_AT_CTIME) ) { - ip->i_d.di_ctime.t_sec = vap->va_ctime.tv_sec; - ip->i_d.di_ctime.t_nsec = vap->va_ctime.tv_nsec; + if ((flags & XFS_ATTR_DMI) && (mask & ATTR_CTIME)) { + ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec; + ip->i_d.di_ctime.t_nsec = iattr->ia_ctime.tv_nsec; ip->i_update_core = 1; timeflags &= ~XFS_ICHGTIME_CHG; } @@ -560,7 +534,7 @@ xfs_setattr( * Send out timestamp changes that need to be set to the * current time. Not done when called by a DMI function. */ - if (timeflags && !(flags & ATTR_DMI)) + if (timeflags && !(flags & XFS_ATTR_DMI)) xfs_ichgtime(ip, timeflags); XFS_STATS_INC(xs_ig_attrchg); @@ -598,7 +572,7 @@ xfs_setattr( } if (DM_EVENT_ENABLED(ip, DM_EVENT_ATTRIBUTE) && - !(flags & ATTR_DMI)) { + !(flags & XFS_ATTR_DMI)) { (void) XFS_SEND_NAMESP(mp, DM_EVENT_ATTRIBUTE, ip, DM_RIGHT_NULL, NULL, DM_RIGHT_NULL, NULL, NULL, 0, 0, AT_DELAY_FLAG(flags)); @@ -3113,7 +3087,7 @@ xfs_alloc_file_space( /* Generate a DMAPI event if needed. */ if (alloc_type != 0 && offset < ip->i_size && - (attr_flags&ATTR_DMI) == 0 && + (attr_flags & XFS_ATTR_DMI) == 0 && DM_EVENT_ENABLED(ip, DM_EVENT_WRITE)) { xfs_off_t end_dmi_offset; @@ -3227,7 +3201,7 @@ retry: allocatesize_fsb -= allocated_fsb; } dmapi_enospc_check: - if (error == ENOSPC && (attr_flags & ATTR_DMI) == 0 && + if (error == ENOSPC && (attr_flags & XFS_ATTR_DMI) == 0 && DM_EVENT_ENABLED(ip, DM_EVENT_NOSPACE)) { error = XFS_SEND_NAMESP(mp, DM_EVENT_NOSPACE, ip, DM_RIGHT_NULL, @@ -3374,7 +3348,7 @@ xfs_free_file_space( end_dmi_offset = offset + len; endoffset_fsb = XFS_B_TO_FSBT(mp, end_dmi_offset); - if (offset < ip->i_size && (attr_flags & ATTR_DMI) == 0 && + if (offset < ip->i_size && (attr_flags & XFS_ATTR_DMI) == 0 && DM_EVENT_ENABLED(ip, DM_EVENT_WRITE)) { if (end_dmi_offset > ip->i_size) end_dmi_offset = ip->i_size; @@ -3385,7 +3359,7 @@ xfs_free_file_space( return error; } - if (attr_flags & ATTR_NOLOCK) + if (attr_flags & XFS_ATTR_NOLOCK) need_iolock = 0; if (need_iolock) { xfs_ilock(ip, XFS_IOLOCK_EXCL); @@ -3562,7 +3536,7 @@ xfs_change_file_space( xfs_off_t startoffset; xfs_off_t llen; xfs_trans_t *tp; - bhv_vattr_t va; + struct iattr iattr; xfs_itrace_entry(ip); @@ -3636,10 +3610,10 @@ xfs_change_file_space( break; } - va.va_mask = XFS_AT_SIZE; - va.va_size = startoffset; + iattr.ia_valid = ATTR_SIZE; + iattr.ia_size = startoffset; - error = xfs_setattr(ip, &va, attr_flags, credp); + error = xfs_setattr(ip, &iattr, attr_flags, credp); if (error) return error; @@ -3669,7 +3643,7 @@ xfs_change_file_space( xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); xfs_trans_ihold(tp, ip); - if ((attr_flags & ATTR_DMI) == 0) { + if ((attr_flags & XFS_ATTR_DMI) == 0) { ip->i_d.di_mode &= ~S_ISUID; /* diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h index 454fa9a3e52..e932a96bec5 100644 --- a/fs/xfs/xfs_vnodeops.h +++ b/fs/xfs/xfs_vnodeops.h @@ -2,9 +2,9 @@ #define _XFS_VNODEOPS_H 1 struct attrlist_cursor_kern; -struct bhv_vattr; struct cred; struct file; +struct iattr; struct inode; struct iovec; struct kiocb; @@ -15,8 +15,12 @@ struct xfs_iomap; int xfs_open(struct xfs_inode *ip); -int xfs_setattr(struct xfs_inode *ip, struct bhv_vattr *vap, int flags, +int xfs_setattr(struct xfs_inode *ip, struct iattr *vap, int flags, struct cred *credp); +#define XFS_ATTR_DMI 0x01 /* invocation from a DMI function */ +#define XFS_ATTR_NONBLOCK 0x02 /* return EAGAIN if operation would block */ +#define XFS_ATTR_NOLOCK 0x04 /* Don't grab any conflicting locks */ + int xfs_readlink(struct xfs_inode *ip, char *link); int xfs_fsync(struct xfs_inode *ip); int xfs_release(struct xfs_inode *ip); -- GitLab From f13fae2d2a9372a5155d20bc9da4c14f02193277 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 21 Jul 2008 16:16:15 +1000 Subject: [PATCH 0178/1024] [XFS] Remove vn_revalidate calls in xfs. These days most of the attributes in struct inode are properly kept in sync by XFS. This patch removes the need for vn_revalidate completely by: - keeping inode.i_flags uptodate after any flags are updated in xfs_ioctl_setattr - keeping i_mode, i_uid and i_gid uptodate in xfs_setattr SGI-PV: 984566 SGI-Modid: xfs-linux-melb:xfs-kern:31679a Signed-off-by: Christoph Hellwig Signed-off-by: Tim Shimmin Signed-off-by: Lachlan McIlroy --- fs/xfs/linux-2.6/xfs_ioctl.c | 29 +++++++++++++++++++-- fs/xfs/linux-2.6/xfs_iops.c | 16 +----------- fs/xfs/linux-2.6/xfs_vnode.c | 50 ------------------------------------ fs/xfs/linux-2.6/xfs_vnode.h | 1 - fs/xfs/linux-2.6/xfs_xattr.c | 7 ++--- fs/xfs/xfs_vnodeops.c | 9 +++++++ 6 files changed, 39 insertions(+), 73 deletions(-) diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index d1b0da6bcdc..acb978d9d08 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -923,6 +923,30 @@ xfs_set_diflags( ip->i_d.di_flags = di_flags; } +STATIC void +xfs_diflags_to_linux( + struct xfs_inode *ip) +{ + struct inode *inode = XFS_ITOV(ip); + unsigned int xflags = xfs_ip2xflags(ip); + + if (xflags & XFS_XFLAG_IMMUTABLE) + inode->i_flags |= S_IMMUTABLE; + else + inode->i_flags &= ~S_IMMUTABLE; + if (xflags & XFS_XFLAG_APPEND) + inode->i_flags |= S_APPEND; + else + inode->i_flags &= ~S_APPEND; + if (xflags & XFS_XFLAG_SYNC) + inode->i_flags |= S_SYNC; + else + inode->i_flags &= ~S_SYNC; + if (xflags & XFS_XFLAG_NOATIME) + inode->i_flags |= S_NOATIME; + else + inode->i_flags &= ~S_NOATIME; +} #define FSX_PROJID 1 #define FSX_EXTSIZE 2 @@ -1121,8 +1145,10 @@ xfs_ioctl_setattr( if (mask & FSX_EXTSIZE) ip->i_d.di_extsize = fa->fsx_extsize >> mp->m_sb.sb_blocklog; - if (mask & FSX_XFLAGS) + if (mask & FSX_XFLAGS) { xfs_set_diflags(ip, fa->fsx_xflags); + xfs_diflags_to_linux(ip); + } xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); xfs_ichgtime(ip, XFS_ICHGTIME_CHG); @@ -1160,7 +1186,6 @@ xfs_ioctl_setattr( (mask & FSX_NONBLOCK) ? DM_FLAGS_NDELAY : 0); } - vn_revalidate(XFS_ITOV(ip)); /* update flags */ return 0; error_return: diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c index 669bbdc2085..e88f5102808 100644 --- a/fs/xfs/linux-2.6/xfs_iops.c +++ b/fs/xfs/linux-2.6/xfs_iops.c @@ -650,21 +650,7 @@ xfs_vn_setattr( struct dentry *dentry, struct iattr *iattr) { - struct inode *inode = dentry->d_inode; - int error; - - if (iattr->ia_valid & ATTR_ATIME) - inode->i_atime = iattr->ia_atime; - - if (iattr->ia_valid & ATTR_MODE) { - if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) - inode->i_mode &= ~S_ISGID; - } - - error = xfs_setattr(XFS_I(inode), iattr, 0, NULL); - if (likely(!error)) - vn_revalidate(vn_from_inode(inode)); - return -error; + return -xfs_setattr(XFS_I(dentry->d_inode), iattr, 0, NULL); } /* diff --git a/fs/xfs/linux-2.6/xfs_vnode.c b/fs/xfs/linux-2.6/xfs_vnode.c index bc7afe00733..25488b6d988 100644 --- a/fs/xfs/linux-2.6/xfs_vnode.c +++ b/fs/xfs/linux-2.6/xfs_vnode.c @@ -82,56 +82,6 @@ vn_ioerror( xfs_do_force_shutdown(ip->i_mount, SHUTDOWN_DEVICE_REQ, f, l); } -/* - * Revalidate the Linux inode from the XFS inode. - * Note: i_size _not_ updated; we must hold the inode - * semaphore when doing that - callers responsibility. - */ -int -vn_revalidate( - bhv_vnode_t *vp) -{ - struct inode *inode = vn_to_inode(vp); - struct xfs_inode *ip = XFS_I(inode); - struct xfs_mount *mp = ip->i_mount; - unsigned long xflags; - - xfs_itrace_entry(ip); - - if (XFS_FORCED_SHUTDOWN(mp)) - return -EIO; - - xfs_ilock(ip, XFS_ILOCK_SHARED); - inode->i_mode = ip->i_d.di_mode; - inode->i_uid = ip->i_d.di_uid; - inode->i_gid = ip->i_d.di_gid; - inode->i_mtime.tv_sec = ip->i_d.di_mtime.t_sec; - inode->i_mtime.tv_nsec = ip->i_d.di_mtime.t_nsec; - inode->i_ctime.tv_sec = ip->i_d.di_ctime.t_sec; - inode->i_ctime.tv_nsec = ip->i_d.di_ctime.t_nsec; - - xflags = xfs_ip2xflags(ip); - if (xflags & XFS_XFLAG_IMMUTABLE) - inode->i_flags |= S_IMMUTABLE; - else - inode->i_flags &= ~S_IMMUTABLE; - if (xflags & XFS_XFLAG_APPEND) - inode->i_flags |= S_APPEND; - else - inode->i_flags &= ~S_APPEND; - if (xflags & XFS_XFLAG_SYNC) - inode->i_flags |= S_SYNC; - else - inode->i_flags &= ~S_SYNC; - if (xflags & XFS_XFLAG_NOATIME) - inode->i_flags |= S_NOATIME; - else - inode->i_flags &= ~S_NOATIME; - xfs_iunlock(ip, XFS_ILOCK_SHARED); - - xfs_iflags_clear(ip, XFS_IMODIFIED); - return 0; -} /* * Add a reference to a referenced vnode. diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/linux-2.6/xfs_vnode.h index 96e4a7b5391..41ca2cec5d3 100644 --- a/fs/xfs/linux-2.6/xfs_vnode.h +++ b/fs/xfs/linux-2.6/xfs_vnode.h @@ -67,7 +67,6 @@ static inline struct inode *vn_to_inode(bhv_vnode_t *vnode) extern void vn_init(void); -extern int vn_revalidate(bhv_vnode_t *); /* * Yeah, these don't take vnode anymore at all, all this should be diff --git a/fs/xfs/linux-2.6/xfs_xattr.c b/fs/xfs/linux-2.6/xfs_xattr.c index b4acb68fc9f..964621fde6e 100644 --- a/fs/xfs/linux-2.6/xfs_xattr.c +++ b/fs/xfs/linux-2.6/xfs_xattr.c @@ -64,7 +64,7 @@ static int xfs_xattr_system_set(struct inode *inode, const char *name, const void *value, size_t size, int flags) { - int error, acl; + int acl; acl = xfs_decode_acl(name); if (acl < 0) @@ -75,10 +75,7 @@ xfs_xattr_system_set(struct inode *inode, const char *name, if (!value) return xfs_acl_vremove(inode, acl); - error = xfs_acl_vset(inode, (void *)value, size, acl); - if (!error) - vn_revalidate(inode); - return error; + return xfs_acl_vset(inode, (void *)value, size, acl); } static struct xattr_handler xfs_xattr_system_handler = { diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index b792a121b1a..76a1166af82 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -83,6 +83,7 @@ xfs_setattr( cred_t *credp) { xfs_mount_t *mp = ip->i_mount; + struct inode *inode = XFS_ITOV(ip); int mask = iattr->ia_valid; xfs_trans_t *tp; int code; @@ -446,6 +447,9 @@ xfs_setattr( ip->i_d.di_mode &= S_IFMT; ip->i_d.di_mode |= iattr->ia_mode & ~S_IFMT; + inode->i_mode &= S_IFMT; + inode->i_mode |= iattr->ia_mode & ~S_IFMT; + xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE); timeflags |= XFS_ICHGTIME_CHG; } @@ -481,6 +485,7 @@ xfs_setattr( &ip->i_udquot, udqp); } ip->i_d.di_uid = uid; + inode->i_uid = uid; } if (igid != gid) { if (XFS_IS_GQUOTA_ON(mp)) { @@ -491,6 +496,7 @@ xfs_setattr( &ip->i_gdquot, gdqp); } ip->i_d.di_gid = gid; + inode->i_gid = gid; } xfs_trans_log_inode (tp, ip, XFS_ILOG_CORE); @@ -503,12 +509,14 @@ xfs_setattr( */ if (mask & (ATTR_ATIME|ATTR_MTIME)) { if (mask & ATTR_ATIME) { + inode->i_atime = iattr->ia_atime; ip->i_d.di_atime.t_sec = iattr->ia_atime.tv_sec; ip->i_d.di_atime.t_nsec = iattr->ia_atime.tv_nsec; ip->i_update_core = 1; timeflags &= ~XFS_ICHGTIME_ACC; } if (mask & ATTR_MTIME) { + inode->i_mtime = iattr->ia_mtime; ip->i_d.di_mtime.t_sec = iattr->ia_mtime.tv_sec; ip->i_d.di_mtime.t_nsec = iattr->ia_mtime.tv_nsec; timeflags &= ~XFS_ICHGTIME_MOD; @@ -524,6 +532,7 @@ xfs_setattr( */ if ((flags & XFS_ATTR_DMI) && (mask & ATTR_CTIME)) { + inode->i_ctime = iattr->ia_ctime; ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec; ip->i_d.di_ctime.t_nsec = iattr->ia_ctime.tv_nsec; ip->i_update_core = 1; -- GitLab From 17b6f586b8e27914b36c9ed7f3e4d289e6274a80 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 28 Jul 2008 00:44:29 -0700 Subject: [PATCH 0179/1024] sparc64: Fix global reg snapshotting on self-cpu. We were picking %i7 out of the wrong register window stack slot. Signed-off-by: David S. Miller --- arch/sparc64/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index 8a9cd3e165b..0f60547c24d 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -319,7 +319,7 @@ static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs, rw = (struct reg_window *) (regs->u_regs[UREG_FP] + STACK_BIAS); - global_reg_snapshot[this_cpu].i7 = rw->ins[6]; + global_reg_snapshot[this_cpu].i7 = rw->ins[7]; } else global_reg_snapshot[this_cpu].i7 = 0; -- GitLab From 221d62c1882d05fc20163347d7e6af279bdffb8e Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 16 Jul 2008 08:46:08 +0200 Subject: [PATCH 0180/1024] [ARM] mx2: add missing Kconfig dependency It seems this small label was lost in the last merge. Without it no CPU type is selected for the MX2 family of processors. And a build will fail badly... Signed-off-by: Juergen Beisert Signed-off-by: Sascha Hauer --- arch/arm/mm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 3a6c8ec34cd..399d1d66bf9 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -187,7 +187,7 @@ config CPU_ARM926T ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \ ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \ ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \ - ARCH_NS9XXX || ARCH_DAVINCI + ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2 default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \ ARCH_OMAP730 || ARCH_OMAP16XX || \ ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \ -- GitLab From 2809fc06f2fc0aac180644cabf9330e50f015bbb Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 18 Jul 2008 08:33:26 +0200 Subject: [PATCH 0181/1024] [ARM] mx1ads: make mmc platform data available for modules Signed-off-by: Paulius Zaleckas Acked-by: Pavel Pisa Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mx1ads.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index 9635d5812bc..baeff24ff02 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -125,7 +125,7 @@ static struct platform_device *devices[] __initdata = { &imx_uart2_device, }; -#ifdef CONFIG_MMC_IMX +#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE) static int mx1ads_mmc_card_present(struct device *dev) { /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */ @@ -143,7 +143,7 @@ mx1ads_init(void) #ifdef CONFIG_LEDS imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2); #endif -#ifdef CONFIG_MMC_IMX +#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE) /* SD/MMC card detect */ imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20); imx_set_mmc_info(&mx1ads_mmc_info); -- GitLab From d7098e31404a25f70f82aa7513e7f5893763576b Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Thu, 17 Jul 2008 19:10:20 +0300 Subject: [PATCH 0182/1024] [ARM] i.MX: remove set_imx_fb_info() export Remove not needed export and fix warning: WARNING: vmlinux.o(__ksymtab+0x400): Section mismatch in reference from the variable __ksymtab_set_imx_fb_info to the function .init.text:set_imx_fb_info() The symbol set_imx_fb_info is exported and annotated __init Fix this by removing the __init annotation of set_imx_fb_info or drop the export. Signed-off-by: Paulius Zaleckas Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/generic.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c index 98ddd8a6d05..c40650dcddf 100644 --- a/arch/arm/mach-imx/generic.c +++ b/arch/arm/mach-imx/generic.c @@ -251,7 +251,6 @@ void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info) { memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imxfb_mach_info)); } -EXPORT_SYMBOL(set_imx_fb_info); static struct resource imxfb_resources[] = { [0] = { -- GitLab From 79a13b29782e252d4f4e8f6111b978519b876cf7 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Mon, 21 Jul 2008 18:44:13 +0300 Subject: [PATCH 0183/1024] [ARM] i.MX: add missing clock functions exports Export missing Clock API symbols. Signed-off-by: Paulius Zaleckas Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/clock.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c index 6a90fe5578d..8915a5fc63c 100644 --- a/arch/arm/mach-imx/clock.c +++ b/arch/arm/mach-imx/clock.c @@ -172,24 +172,29 @@ found: return clk; } +EXPORT_SYMBOL(clk_get); void clk_put(struct clk *clk) { } +EXPORT_SYMBOL(clk_put); int clk_enable(struct clk *clk) { return 0; } +EXPORT_SYMBOL(clk_enable); void clk_disable(struct clk *clk) { } +EXPORT_SYMBOL(clk_disable); unsigned long clk_get_rate(struct clk *clk) { return clk->get_rate(); } +EXPORT_SYMBOL(clk_get_rate); int imx_clocks_init(void) { -- GitLab From 86183a5fd0ce67cb28d6e4af4775105edc8872b7 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 24 Jul 2008 23:50:35 +0200 Subject: [PATCH 0184/1024] [ARM] add Sascha Hauer as Freescale i.MX Maintainer Signed-off-by: Sascha Hauer --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 03c5d6ccb9f..de35fb7edd6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -502,6 +502,12 @@ L: openezx-devel@lists.openezx.org (subscribers-only) W: http://www.openezx.org/ S: Maintained +ARM/FREESCALE IMX / MXC ARM ARCHITECTURE +P: Sascha Hauer +M: kernel@pengutronix.de +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +S: Maintained + ARM/GLOMATION GESBC9312SX MACHINE SUPPORT P: Lennert Buytenhek M: kernel@wantstofly.org -- GitLab From d7ba11d01cfedf63b50391fbe4a05274b6992b43 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 27 Jul 2008 12:02:04 -0700 Subject: [PATCH 0185/1024] x86: remove stray <6> in BogoMIPS printk Rabin Vincent noticed that there's a stray <6> in BogoMIPS printk: > Remove the extra KERN_INFO which causes this: > Calibrating delay loop... <6>179.40 BogoMIPS (lpj=897024) > - printk(KERN_INFO "%lu.%02lu BogoMIPS (lpj=%lu)\n", > - loops_per_jiffy/(500000/HZ), > - (loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy); > + printk("%lu.%02lu BogoMIPS (lpj=%lu)\n", > + loops_per_jiffy/(500000/HZ), > + (loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy); > } How about just using KERN_CONT and leaving the whitespace for a patch that does the entire file? Reported-by: Rabin Vincent --- init/calibrate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/init/calibrate.c b/init/calibrate.c index 7963e3fc51d..a379c906119 100644 --- a/init/calibrate.c +++ b/init/calibrate.c @@ -170,7 +170,7 @@ void __cpuinit calibrate_delay(void) loops_per_jiffy &= ~loopbit; } } - printk(KERN_INFO "%lu.%02lu BogoMIPS (lpj=%lu)\n", + printk(KERN_CONT "%lu.%02lu BogoMIPS (lpj=%lu)\n", loops_per_jiffy/(500000/HZ), (loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy); } -- GitLab From e193325e3e3de188ae2aa5207adc7129aacc5c9d Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 28 Jul 2008 10:43:22 +0200 Subject: [PATCH 0186/1024] cpm2: Implement GPIO LIB API on CPM2 Freescale SoC. This patch implement GPIO LIB support for the CPM2 GPIOs. The code can also be used for CPM1 GPIO port E, as both cores are compatible at the register level. Based on earlier work by Laurent Pinchart. Signed-off-by: Jochen Friedrich Cc: Laurent Pinchart Signed-off-by: Kumar Gala --- arch/powerpc/platforms/Kconfig | 2 + arch/powerpc/sysdev/cpm2.c | 11 +++ arch/powerpc/sysdev/cpm_common.c | 123 +++++++++++++++++++++++++++++++ include/asm-powerpc/cpm.h | 3 + 4 files changed, 139 insertions(+) diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 1d0968775c0..18a71839dc9 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -254,6 +254,8 @@ config CPM2 select CPM select PPC_LIB_RHEAP select PPC_PCI_CHOICE + select ARCH_REQUIRE_GPIOLIB + select GENERIC_GPIO help The CPM2 (Communications Processor Module) is a coprocessor on embedded CPUs made by Freescale. Selecting this option means that diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index 5a6c5dfc53e..9311778a508 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -377,3 +377,14 @@ void cpm2_set_pin(int port, int pin, int flags) else clrbits32(&iop[port].odr, pin); } + +static int cpm_init_par_io(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank") + cpm2_gpiochip_add32(np); + return 0; +} +arch_initcall(cpm_init_par_io); + diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index e4b7296acb2..53da8a079f9 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -19,6 +19,8 @@ #include #include +#include +#include #include #include @@ -28,6 +30,10 @@ #include +#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO) +#include +#endif + #ifdef CONFIG_PPC_EARLY_DEBUG_CPM static u32 __iomem *cpm_udbg_txdesc = (u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR; @@ -207,3 +213,120 @@ dma_addr_t cpm_muram_dma(void __iomem *addr) return muram_pbase + ((u8 __iomem *)addr - muram_vbase); } EXPORT_SYMBOL(cpm_muram_dma); + +#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO) + +struct cpm2_ioports { + u32 dir, par, sor, odr, dat; + u32 res[3]; +}; + +struct cpm2_gpio32_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u32 cpdata; +}; + +static inline struct cpm2_gpio32_chip * +to_cpm2_gpio32_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc); +} + +static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + + cpm2_gc->cpdata = in_be32(&iop->dat); +} + +static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + return !!(in_be32(&iop->dat) & pin_mask); +} + +static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); + + spin_lock_irqsave(&cpm2_gc->lock, flags); + + if (value) + cpm2_gc->cpdata |= pin_mask; + else + cpm2_gc->cpdata &= ~pin_mask; + + out_be32(&iop->dat, cpm2_gc->cpdata); + + spin_unlock_irqrestore(&cpm2_gc->lock, flags); +} + +static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + setbits32(&iop->dir, pin_mask); + + cpm2_gpio32_set(gc, gpio, val); + + return 0; +} + +static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm2_ioports __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + clrbits32(&iop->dir, pin_mask); + + return 0; +} + +int cpm2_gpiochip_add32(struct device_node *np) +{ + struct cpm2_gpio32_chip *cpm2_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL); + if (!cpm2_gc) + return -ENOMEM; + + spin_lock_init(&cpm2_gc->lock); + + mm_gc = &cpm2_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm2_gpio32_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 32; + gc->direction_input = cpm2_gpio32_dir_in; + gc->direction_output = cpm2_gpio32_dir_out; + gc->get = cpm2_gpio32_get; + gc->set = cpm2_gpio32_set; + + return of_mm_gpiochip_add(np, mm_gc); +} +#endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */ diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h index 63a55337c2d..24d79e3abd8 100644 --- a/include/asm-powerpc/cpm.h +++ b/include/asm-powerpc/cpm.h @@ -3,6 +3,7 @@ #include #include +#include /* Opcodes common to CPM1 and CPM2 */ @@ -100,4 +101,6 @@ unsigned long cpm_muram_offset(void __iomem *addr); dma_addr_t cpm_muram_dma(void __iomem *addr); int cpm_command(u32 command, u8 opcode); +int cpm2_gpiochip_add32(struct device_node *np); + #endif -- GitLab From dc2380ec8572fcd7f7e9579afc9fb223300d922f Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Thu, 3 Jul 2008 02:18:23 +1000 Subject: [PATCH 0187/1024] powerpc: implement GPIO LIB API on CPM1 Freescale SoC. This patch implement GPIO LIB support for the CPM1 GPIOs. Signed-off-by: Jochen Friedrich Signed-off-by: Kumar Gala --- arch/powerpc/platforms/8xx/Kconfig | 10 ++ arch/powerpc/sysdev/cpm1.c | 267 ++++++++++++++++++++++++++++- 2 files changed, 272 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 6fc849e51e4..71d7562e190 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -105,6 +105,16 @@ config 8xx_COPYBACK If in doubt, say Y here. +config 8xx_GPIO + bool "GPIO API Support" + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Saying Y here will cause the ports on an MPC8xx processor to be used + with the GPIO API. If you say N here, the kernel needs less memory. + + If in doubt, say Y here. + config 8xx_CPU6 bool "CPU6 Silicon Errata (860 Pre Rev. C)" help diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index 661df42830b..4a04823e842 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -42,6 +43,10 @@ #include +#ifdef CONFIG_8xx_GPIO +#include +#endif + #define CPM_MAP_SIZE (0x4000) cpm8xx_t __iomem *cpmp; /* Pointer to comm processor space */ @@ -290,20 +295,24 @@ struct cpm_ioport16 { __be16 res[3]; }; -struct cpm_ioport32 { - __be32 dir, par, sor; +struct cpm_ioport32b { + __be32 dir, par, odr, dat; +}; + +struct cpm_ioport32e { + __be32 dir, par, sor, odr, dat; }; static void cpm1_set_pin32(int port, int pin, int flags) { - struct cpm_ioport32 __iomem *iop; + struct cpm_ioport32e __iomem *iop; pin = 1 << (31 - pin); if (port == CPM_PORTB) - iop = (struct cpm_ioport32 __iomem *) + iop = (struct cpm_ioport32e __iomem *) &mpc8xx_immr->im_cpm.cp_pbdir; else - iop = (struct cpm_ioport32 __iomem *) + iop = (struct cpm_ioport32e __iomem *) &mpc8xx_immr->im_cpm.cp_pedir; if (flags & CPM_PIN_OUTPUT) @@ -498,3 +507,251 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode) return 0; } + +/* + * GPIO LIB API implementation + */ +#ifdef CONFIG_8xx_GPIO + +struct cpm1_gpio16_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u16 cpdata; +}; + +static inline struct cpm1_gpio16_chip * +to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc); +} + +static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + + cpm1_gc->cpdata = in_be16(&iop->dat); +} + +static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + return !!(in_be16(&iop->dat) & pin_mask); +} + +static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + unsigned long flags; + u16 pin_mask = 1 << (15 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + if (value) + cpm1_gc->cpdata |= pin_mask; + else + cpm1_gc->cpdata &= ~pin_mask; + + out_be16(&iop->dat, cpm1_gc->cpdata); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); +} + +static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + setbits16(&iop->dir, pin_mask); + + cpm1_gpio16_set(gc, gpio, val); + + return 0; +} + +static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport16 __iomem *iop = mm_gc->regs; + u16 pin_mask; + + pin_mask = 1 << (15 - gpio); + + clrbits16(&iop->dir, pin_mask); + + return 0; +} + +int cpm1_gpiochip_add16(struct device_node *np) +{ + struct cpm1_gpio16_chip *cpm1_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); + if (!cpm1_gc) + return -ENOMEM; + + spin_lock_init(&cpm1_gc->lock); + + mm_gc = &cpm1_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm1_gpio16_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 16; + gc->direction_input = cpm1_gpio16_dir_in; + gc->direction_output = cpm1_gpio16_dir_out; + gc->get = cpm1_gpio16_get; + gc->set = cpm1_gpio16_set; + + return of_mm_gpiochip_add(np, mm_gc); +} + +struct cpm1_gpio32_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + /* shadowed data register to clear/set bits safely */ + u32 cpdata; +}; + +static inline struct cpm1_gpio32_chip * +to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc); +} + +static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + + cpm1_gc->cpdata = in_be32(&iop->dat); +} + +static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + return !!(in_be32(&iop->dat) & pin_mask); +} + +static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + unsigned long flags; + u32 pin_mask = 1 << (31 - gpio); + + spin_lock_irqsave(&cpm1_gc->lock, flags); + + if (value) + cpm1_gc->cpdata |= pin_mask; + else + cpm1_gc->cpdata &= ~pin_mask; + + out_be32(&iop->dat, cpm1_gc->cpdata); + + spin_unlock_irqrestore(&cpm1_gc->lock, flags); +} + +static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + setbits32(&iop->dir, pin_mask); + + cpm1_gpio32_set(gc, gpio, val); + + return 0; +} + +static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct cpm_ioport32b __iomem *iop = mm_gc->regs; + u32 pin_mask; + + pin_mask = 1 << (31 - gpio); + + clrbits32(&iop->dir, pin_mask); + + return 0; +} + +int cpm1_gpiochip_add32(struct device_node *np) +{ + struct cpm1_gpio32_chip *cpm1_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL); + if (!cpm1_gc) + return -ENOMEM; + + spin_lock_init(&cpm1_gc->lock); + + mm_gc = &cpm1_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + mm_gc->save_regs = cpm1_gpio32_save_regs; + of_gc->gpio_cells = 2; + gc->ngpio = 32; + gc->direction_input = cpm1_gpio32_dir_in; + gc->direction_output = cpm1_gpio32_dir_out; + gc->get = cpm1_gpio32_get; + gc->set = cpm1_gpio32_set; + + return of_mm_gpiochip_add(np, mm_gc); +} + +static int cpm_init_par_io(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a") + cpm1_gpiochip_add16(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b") + cpm1_gpiochip_add32(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c") + cpm1_gpiochip_add16(np); + + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d") + cpm1_gpiochip_add16(np); + + /* Port E uses CPM2 layout */ + for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e") + cpm2_gpiochip_add32(np); + return 0; +} +arch_initcall(cpm_init_par_io); + +#endif /* CONFIG_8xx_GPIO */ -- GitLab From 7485d26b7e13ee8ff82adb271ac90a996c1fe830 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 24 Jul 2008 18:36:37 +0200 Subject: [PATCH 0188/1024] cpm_uart: Modem control lines support This patch replaces the get_mctrl/set_mctrl stubs with modem control line read/write access through the GPIO lib. Available modem control lines are described in the device tree using GPIO bindings. The driver expect a GPIO pin for each of the CTS, RTS, DCD, DSR, DTR and RI signals. Unused control lines can be left out. Signed-off-by: Laurent Pinchart Signed-off-by: Kumar Gala --- .../dts-bindings/fsl/cpm_qe/serial.txt | 11 +++++ drivers/serial/cpm_uart/cpm_uart.h | 10 +++++ drivers/serial/cpm_uart/cpm_uart_core.c | 40 +++++++++++++++++-- 3 files changed, 58 insertions(+), 3 deletions(-) diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt index b35f3482e3e..2ea76d9d137 100644 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt @@ -7,6 +7,15 @@ Currently defined compatibles: - fsl,cpm2-scc-uart - fsl,qe-uart +Modem control lines connected to GPIO controllers are listed in the gpios +property as described in booting-without-of.txt, section IX.1 in the following +order: + +CTS, RTS, DCD, DSR, DTR, and RI. + +The gpios property is optional and can be left out when control lines are +not used. + Example: serial@11a00 { @@ -18,4 +27,6 @@ Example: interrupt-parent = <&PIC>; fsl,cpm-brg = <1>; fsl,cpm-command = <00800000>; + gpios = <&gpio_c 15 0 + &gpio_d 29 0>; }; diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index 5c76e0ae058..5999ef5ac78 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -50,6 +50,15 @@ #define SCC_WAIT_CLOSING 100 +#define GPIO_CTS 0 +#define GPIO_RTS 1 +#define GPIO_DCD 2 +#define GPIO_DSR 3 +#define GPIO_DTR 4 +#define GPIO_RI 5 + +#define NUM_GPIOS (GPIO_RI+1) + struct uart_cpm_port { struct uart_port port; u16 rx_nrfifos; @@ -82,6 +91,7 @@ struct uart_cpm_port { int wait_closing; /* value to combine with opcode to form cpm command */ u32 command; + int gpios[NUM_GPIOS]; }; extern int cpm_uart_nr; diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index a4f86927a74..5e0c17f7165 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -43,6 +43,8 @@ #include #include #include +#include +#include #include #include @@ -96,13 +98,41 @@ static unsigned int cpm_uart_tx_empty(struct uart_port *port) static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) { - /* Whee. Do nothing. */ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (pinfo->gpios[GPIO_RTS] >= 0) + gpio_set_value(pinfo->gpios[GPIO_RTS], !(mctrl & TIOCM_RTS)); + + if (pinfo->gpios[GPIO_DTR] >= 0) + gpio_set_value(pinfo->gpios[GPIO_DTR], !(mctrl & TIOCM_DTR)); } static unsigned int cpm_uart_get_mctrl(struct uart_port *port) { - /* Whee. Do nothing. */ - return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + unsigned int mctrl = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + if (pinfo->gpios[GPIO_CTS] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_CTS])) + mctrl &= ~TIOCM_CTS; + } + + if (pinfo->gpios[GPIO_DSR] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DSR])) + mctrl &= ~TIOCM_DSR; + } + + if (pinfo->gpios[GPIO_DCD] >= 0) { + if (gpio_get_value(pinfo->gpios[GPIO_DCD])) + mctrl &= ~TIOCM_CAR; + } + + if (pinfo->gpios[GPIO_RI] >= 0) { + if (!gpio_get_value(pinfo->gpios[GPIO_RI])) + mctrl |= TIOCM_RNG; + } + + return mctrl; } /* @@ -991,6 +1021,7 @@ static int cpm_uart_init_port(struct device_node *np, void __iomem *mem, *pram; int len; int ret; + int i; data = of_get_property(np, "fsl,cpm-brg", &len); if (!data || len != 4) { @@ -1050,6 +1081,9 @@ static int cpm_uart_init_port(struct device_node *np, goto out_pram; } + for (i = 0; i < NUM_GPIOS; i++) + pinfo->gpios[i] = of_get_gpio(np, i); + return cpm_uart_request_port(&pinfo->port); out_pram: -- GitLab From 80776554b6c93cf828ddc702010c6a189aa0d0e9 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 28 Jul 2008 10:42:16 +0200 Subject: [PATCH 0189/1024] cpm_uart: Add generic clock API support to set baudrates This patch introduces baudrate setting support via the generic clock API. When present the optional device tree clock property is used instead of fsl-cpm-brg. Platforms can then define complex clock schemes, to output the serial clock on an external pin for instance. Signed-off-by: Laurent Pinchart Signed-off-by: Kumar Gala --- arch/powerpc/platforms/Kconfig | 1 + drivers/serial/cpm_uart/cpm_uart.h | 1 + drivers/serial/cpm_uart/cpm_uart_core.c | 26 ++++++++++++++++++------- 3 files changed, 21 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 18a71839dc9..4c900efa164 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -283,6 +283,7 @@ config FSL_ULI1575 config CPM bool + select PPC_CLOCK config OF_RTC bool diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index 5999ef5ac78..7274b527a3c 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -77,6 +77,7 @@ struct uart_cpm_port { unsigned char *rx_buf; u32 flags; void (*set_lineif)(struct uart_cpm_port *); + struct clk *clk; u8 brg; uint dp_addr; void *mem_addr; diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 5e0c17f7165..25efca5a7a1 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -45,6 +45,7 @@ #include #include #include +#include #include #include @@ -596,7 +597,10 @@ static void cpm_uart_set_termios(struct uart_port *port, out_be16(&sccp->scc_psmr, (sbits << 12) | scval); } - cpm_set_brg(pinfo->brg - 1, baud); + if (pinfo->clk) + clk_set_rate(pinfo->clk, baud); + else + cpm_set_brg(pinfo->brg - 1, baud); spin_unlock_irqrestore(&port->lock, flags); } @@ -1023,13 +1027,21 @@ static int cpm_uart_init_port(struct device_node *np, int ret; int i; - data = of_get_property(np, "fsl,cpm-brg", &len); - if (!data || len != 4) { - printk(KERN_ERR "CPM UART %s has no/invalid " - "fsl,cpm-brg property.\n", np->name); - return -EINVAL; + data = of_get_property(np, "clock", NULL); + if (data) { + struct clk *clk = clk_get(NULL, (const char*)data); + if (!IS_ERR(clk)) + pinfo->clk = clk; + } + if (!pinfo->clk) { + data = of_get_property(np, "fsl,cpm-brg", &len); + if (!data || len != 4) { + printk(KERN_ERR "CPM UART %s has no/invalid " + "fsl,cpm-brg property.\n", np->name); + return -EINVAL; + } + pinfo->brg = *data; } - pinfo->brg = *data; data = of_get_property(np, "fsl,cpm-command", &len); if (!data || len != 4) { -- GitLab From e517881e427757afc3cce6d76173b1d898b30ab3 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 12 Jun 2008 03:04:31 +0400 Subject: [PATCH 0190/1024] powerpc: rtc_cmos_setup: assign interrupts only if there is i8259 PIC i8259 PIC is disabled on MPC8610HPCD boards, thus currently rtc-cmos driver fails to probe. To fix the issue, we lookup the device tree for "chrp,iic" and "pnpPNP,000" compatible devices, and if not found we do not assign RTC IRQ and assuming that i8259 was disabled. Though this patch fixes RTC on some boards (and surely should not break any other), the whole approach is still broken. We can't easily fix this though, because old device trees do not specify i8259 interrupts for the cmos rtc node. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/rtc_cmos_setup.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c index c09ddc0dbeb..c1879ebfd4f 100644 --- a/arch/powerpc/sysdev/rtc_cmos_setup.c +++ b/arch/powerpc/sysdev/rtc_cmos_setup.c @@ -21,6 +21,7 @@ static int __init add_rtc(void) struct device_node *np; struct platform_device *pd; struct resource res[2]; + unsigned int num_res = 1; int ret; memset(&res, 0, sizeof(res)); @@ -41,14 +42,24 @@ static int __init add_rtc(void) if (res[0].start != RTC_PORT(0)) return -EINVAL; - /* Use a fixed interrupt value of 8 since on PPC if we are using this - * its off an i8259 which we ensure has interrupt numbers 0..15. */ - res[1].start = 8; - res[1].end = 8; - res[1].flags = IORESOURCE_IRQ; + np = of_find_compatible_node(NULL, NULL, "chrp,iic"); + if (!np) + np = of_find_compatible_node(NULL, NULL, "pnpPNP,000"); + if (np) { + of_node_put(np); + /* + * Use a fixed interrupt value of 8 since on PPC if we are + * using this its off an i8259 which we ensure has interrupt + * numbers 0..15. + */ + res[1].start = 8; + res[1].end = 8; + res[1].flags = IORESOURCE_IRQ; + num_res++; + } pd = platform_device_register_simple("rtc_cmos", -1, - &res[0], 2); + &res[0], num_res); if (IS_ERR(pd)) return PTR_ERR(pd); -- GitLab From dddb8d311157d054da5441385f681b8cc0e5a94b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 22 Jul 2008 18:00:43 +0200 Subject: [PATCH 0191/1024] cpm2: Rework baud rate generators configuration to support external clocks. The CPM2 BRG setup functions cpm_setbrg and cpm2_fastbrg don't support external clocks. This patch adds a new exported __cpm2_setbrg function that takes the clock rate and clock source as extra parameters, and moves cpm_setbrg and cpm2_fastbrg to include/asm-powerpc/cpm2.h where they become inline wrappers around __cpm2_setbrg. Signed-off-by: Laurent Pinchart Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/cpm2.c | 34 ++++------------------------ include/asm-powerpc/cpm2.h | 46 +++++++++++++++++++++++++++----------- 2 files changed, 37 insertions(+), 43 deletions(-) diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index 9311778a508..f1c3395633b 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -115,16 +115,10 @@ EXPORT_SYMBOL(cpm_command); * Baud rate clocks are zero-based in the driver code (as that maps * to port numbers). Documentation uses 1-based numbering. */ -#define BRG_INT_CLK (get_brgfreq()) -#define BRG_UART_CLK (BRG_INT_CLK/16) - -/* This function is used by UARTS, or anything else that uses a 16x - * oversampled clock. - */ -void -cpm_setbrg(uint brg, uint rate) +void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src) { u32 __iomem *bp; + u32 val; /* This is good enough to get SMCs running..... */ @@ -135,34 +129,14 @@ cpm_setbrg(uint brg, uint rate) brg -= 4; } bp += brg; - out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN); - - cpm2_unmap(bp); -} - -/* This function is used to set high speed synchronous baud rate - * clocks. - */ -void -cpm2_fastbrg(uint brg, uint rate, int div16) -{ - u32 __iomem *bp; - u32 val; - - if (brg < 4) { - bp = cpm2_map_size(im_brgc1, 16); - } else { - bp = cpm2_map_size(im_brgc5, 16); - brg -= 4; - } - bp += brg; - val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN; + val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src; if (div16) val |= CPM_BRG_DIV16; out_be32(bp, val); cpm2_unmap(bp); } +EXPORT_SYMBOL(__cpm2_setbrg); int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode) { diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h index 2c7fd9cee29..2a6fa0183ac 100644 --- a/include/asm-powerpc/cpm2.h +++ b/include/asm-powerpc/cpm2.h @@ -12,6 +12,7 @@ #include #include +#include #ifdef CONFIG_PPC_85xx #define CPM_MAP_ADDR (get_immrbase() + 0x80000) @@ -93,10 +94,40 @@ extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */ #define cpm_dpfree cpm_muram_free #define cpm_dpram_addr cpm_muram_addr -extern void cpm_setbrg(uint brg, uint rate); -extern void cpm2_fastbrg(uint brg, uint rate, int div16); extern void cpm2_reset(void); +/* Baud rate generators. +*/ +#define CPM_BRG_RST ((uint)0x00020000) +#define CPM_BRG_EN ((uint)0x00010000) +#define CPM_BRG_EXTC_INT ((uint)0x00000000) +#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) +#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) +#define CPM_BRG_ATB ((uint)0x00002000) +#define CPM_BRG_CD_MASK ((uint)0x00001ffe) +#define CPM_BRG_DIV16 ((uint)0x00000001) + +#define CPM2_BRG_INT_CLK (get_brgfreq()) +#define CPM2_BRG_UART_CLK (CPM2_BRG_INT_CLK/16) + +extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src); + +/* This function is used by UARTS, or anything else that uses a 16x + * oversampled clock. + */ +static inline void cpm_setbrg(uint brg, uint rate) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT); +} + +/* This function is used to set high speed synchronous baud rate + * clocks. + */ +static inline void cpm2_fastbrg(uint brg, uint rate, int div16) +{ + __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT); +} + /* Function code bits, usually generic to devices. */ #define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ @@ -195,17 +226,6 @@ typedef struct smc_uart { #define SMCM_TX ((unsigned char)0x02) #define SMCM_RX ((unsigned char)0x01) -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - /* SCCs. */ #define SCC_GSMRH_IRP ((uint)0x00040000) -- GitLab From 0e09c863dbb8b1816ebc106df1a1cae4c588ce0e Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Mon, 28 Jul 2008 16:37:10 +0200 Subject: [PATCH 0192/1024] pcmcia: rsrc_nonstatic: check value, not pointer Bug found by Harvey Harrison and Stephen Rothwell. Signed-off-by: Dominik Brodowski --- drivers/pcmcia/rsrc_nonstatic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index d0c1d63d189..203e579ebbd 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -275,7 +275,7 @@ static int readable(struct pcmcia_socket *s, struct resource *res, destroy_cis_cache(s); } s->cis_mem.res = NULL; - if ((ret != 0) || (count == 0)) + if ((ret != 0) || (*count == 0)) return 0; return 1; } -- GitLab From 7c896834735f497cc405068d16a51717f993af7f Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 28 Jul 2008 16:57:22 +0100 Subject: [PATCH 0193/1024] [ARM] 5180/1: at91: Fix at91_nand -> atmel_nand rename fallout struct at91_nand has been renamed atmel_nand. Fix the four boards that were added since the patch was created. Signed-off-by: Haavard Skinnemoen Acked-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/board-qil-a9260.c | 2 +- arch/arm/mach-at91/board-sam9g20ek.c | 2 +- arch/arm/mach-at91/board-usb-a9260.c | 2 +- arch/arm/mach-at91/board-usb-a9263.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 99b4ec3818d..f847a53b4eb 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -140,7 +140,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 45617c20124..a751a7d615c 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -143,7 +143,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio } /* det_pin is not connected */ -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, .rdy_pin = AT91_PIN_PC13, diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 837aedf8ffe..0339a7b6f04 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -114,7 +114,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index 95800d32bd4..12857066981 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -127,7 +127,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected -- GitLab From 0e241ffd306c0896bb9959be7faa4d4cfcb706d9 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 24 Jul 2008 16:58:42 -0700 Subject: [PATCH 0194/1024] locking: fix mutex @key parameter kernel-doc notation Fix @key parameter to mutex_init() and one of its callers. Warning(linux-2.6.26-git11//drivers/base/class.c:210): No description found for parameter 'key' Signed-off-by: Randy Dunlap Acked-by: Greg Kroah-Hartman Signed-off-by: Ingo Molnar --- drivers/base/class.c | 1 + kernel/mutex.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/base/class.c b/drivers/base/class.c index 839d27cecb3..5667c2f02c5 100644 --- a/drivers/base/class.c +++ b/drivers/base/class.c @@ -198,6 +198,7 @@ static void class_create_release(struct class *cls) * class_create - create a struct class structure * @owner: pointer to the module that is to "own" this struct class * @name: pointer to a string for the name of this class. + * @key: the lock_class_key for this class; used by mutex lock debugging * * This is used to create a struct class pointer that can then be used * in calls to device_create(). diff --git a/kernel/mutex.c b/kernel/mutex.c index bcdc9ac8ef6..12c779dc65d 100644 --- a/kernel/mutex.c +++ b/kernel/mutex.c @@ -34,6 +34,7 @@ /*** * mutex_init - initialize the mutex * @lock: the mutex to be initialized + * @key: the lock_class_key for the class; used by mutex lock debugging * * Initialize the mutex to unlocked state. * -- GitLab From 74deace2f952f7a28d2c516facc9954199881937 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 28 Jul 2008 14:50:31 -0400 Subject: [PATCH 0195/1024] Documentation: remove old sbc8260 board specific information This file contains 8 yr. old board specific information that was for the now gone ppc implementation, and it pre-dates widespread u-boot support. Any of the technical details of the board memory map would be more appropriately captured in a dts if I revive it as powerpc anyway. Signed-off-by: Paul Gortmaker Acked-by: Jason Wessel Signed-off-by: Kumar Gala --- Documentation/powerpc/00-INDEX | 2 - .../powerpc/SBC8260_memory_mapping.txt | 197 ------------------ 2 files changed, 199 deletions(-) delete mode 100644 Documentation/powerpc/SBC8260_memory_mapping.txt diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX index 3be84aa38df..29d839ce732 100644 --- a/Documentation/powerpc/00-INDEX +++ b/Documentation/powerpc/00-INDEX @@ -20,8 +20,6 @@ mpc52xx-device-tree-bindings.txt - MPC5200 Device Tree Bindings ppc_htab.txt - info about the Linux/PPC /proc/ppc_htab entry -SBC8260_memory_mapping.txt - - EST SBC8260 board info smp.txt - use and state info about Linux/PPC on MP machines sound.txt diff --git a/Documentation/powerpc/SBC8260_memory_mapping.txt b/Documentation/powerpc/SBC8260_memory_mapping.txt deleted file mode 100644 index e6e9ee0506c..00000000000 --- a/Documentation/powerpc/SBC8260_memory_mapping.txt +++ /dev/null @@ -1,197 +0,0 @@ -Please mail me (Jon Diekema, diekema_jon@si.com or diekema@cideas.com) -if you have questions, comments or corrections. - - * EST SBC8260 Linux memory mapping rules - - http://www.estc.com/ - http://www.estc.com/products/boards/SBC8260-8240_ds.html - - Initial conditions: - ------------------- - - Tasks that need to be perform by the boot ROM before control is - transferred to zImage (compressed Linux kernel): - - - Define the IMMR to 0xf0000000 - - - Initialize the memory controller so that RAM is available at - physical address 0x00000000. On the SBC8260 is this 16M (64M) - SDRAM. - - - The boot ROM should only clear the RAM that it is using. - - The reason for doing this is to enhances the chances of a - successful post mortem on a Linux panic. One of the first - items to examine is the 16k (LOG_BUF_LEN) circular console - buffer called log_buf which is defined in kernel/printk.c. - - - To enhance boot ROM performance, the I-cache can be enabled. - - Date: Mon, 22 May 2000 14:21:10 -0700 - From: Neil Russell - - LiMon (LInux MONitor) runs with and starts Linux with MMU - off, I-cache enabled, D-cache disabled. The I-cache doesn't - need hints from the MMU to work correctly as the D-cache - does. No D-cache means no special code to handle devices in - the presence of cache (no snooping, etc). The use of the - I-cache means that the monitor can run acceptably fast - directly from ROM, rather than having to copy it to RAM. - - - Build the board information structure (see - include/asm-ppc/est8260.h for its definition) - - - The compressed Linux kernel (zImage) contains a bootstrap loader - that is position independent; you can load it into any RAM, - ROM or FLASH memory address >= 0x00500000 (above 5 MB), or - at its link address of 0x00400000 (4 MB). - - Note: If zImage is loaded at its link address of 0x00400000 (4 MB), - then zImage will skip the step of moving itself to - its link address. - - - Load R3 with the address of the board information structure - - - Transfer control to zImage - - - The Linux console port is SMC1, and the baud rate is controlled - from the bi_baudrate field of the board information structure. - On thing to keep in mind when picking the baud rate, is that - there is no flow control on the SMC ports. I would stick - with something safe and standard like 19200. - - On the EST SBC8260, the SMC1 port is on the COM1 connector of - the board. - - - EST SBC8260 defaults: - --------------------- - - Chip - Memory Sel Bus Use - --------------------- --- --- ---------------------------------- - 0x00000000-0x03FFFFFF CS2 60x (16M or 64M)/64M SDRAM - 0x04000000-0x04FFFFFF CS4 local 4M/16M SDRAM (soldered to the board) - 0x21000000-0x21000000 CS7 60x 1B/64K Flash present detect (from the flash SIMM) - 0x21000001-0x21000001 CS7 60x 1B/64K Switches (read) and LEDs (write) - 0x22000000-0x2200FFFF CS5 60x 8K/64K EEPROM - 0xFC000000-0xFCFFFFFF CS6 60x 2M/16M flash (8 bits wide, soldered to the board) - 0xFE000000-0xFFFFFFFF CS0 60x 4M/16M flash (SIMM) - - Notes: - ------ - - - The chip selects can map 32K blocks and up (powers of 2) - - - The SDRAM machine can handled up to 128Mbytes per chip select - - - Linux uses the 60x bus memory (the SDRAM DIMM) for the - communications buffers. - - - BATs can map 128K-256Mbytes each. There are four data BATs and - four instruction BATs. Generally the data and instruction BATs - are mapped the same. - - - The IMMR must be set above the kernel virtual memory addresses, - which start at 0xC0000000. Otherwise, the kernel may crash as - soon as you start any threads or processes due to VM collisions - in the kernel or user process space. - - - Details from Dan Malek on 10/29/1999: - - The user application virtual space consumes the first 2 Gbytes - (0x00000000 to 0x7FFFFFFF). The kernel virtual text starts at - 0xC0000000, with data following. There is a "protection hole" - between the end of kernel data and the start of the kernel - dynamically allocated space, but this space is still within - 0xCxxxxxxx. - - Obviously the kernel can't map any physical addresses 1:1 in - these ranges. - - - Details from Dan Malek on 5/19/2000: - - During the early kernel initialization, the kernel virtual - memory allocator is not operational. Prior to this KVM - initialization, we choose to map virtual to physical addresses - 1:1. That is, the kernel virtual address exactly matches the - physical address on the bus. These mappings are typically done - in arch/ppc/kernel/head.S, or arch/ppc/mm/init.c. Only - absolutely necessary mappings should be done at this time, for - example board control registers or a serial uart. Normal device - driver initialization should map resources later when necessary. - - Although platform dependent, and certainly the case for embedded - 8xx, traditionally memory is mapped at physical address zero, - and I/O devices above physical address 0x80000000. The lowest - and highest (above 0xf0000000) I/O addresses are traditionally - used for devices or registers we need to map during kernel - initialization and prior to KVM operation. For this reason, - and since it followed prior PowerPC platform examples, I chose - to map the embedded 8xx kernel to the 0xc0000000 virtual address. - This way, we can enable the MMU to map the kernel for proper - operation, and still map a few windows before the KVM is operational. - - On some systems, you could possibly run the kernel at the - 0x80000000 or any other virtual address. It just depends upon - mapping that must be done prior to KVM operational. You can never - map devices or kernel spaces that overlap with the user virtual - space. This is why default IMMR mapping used by most BDM tools - won't work. They put the IMMR at something like 0x10000000 or - 0x02000000 for example. You simply can't map these addresses early - in the kernel, and continue proper system operation. - - The embedded 8xx/82xx kernel is mature enough that all you should - need to do is map the IMMR someplace at or above 0xf0000000 and it - should boot far enough to get serial console messages and KGDB - connected on any platform. There are lots of other subtle memory - management design features that you simply don't need to worry - about. If you are changing functions related to MMU initialization, - you are likely breaking things that are known to work and are - heading down a path of disaster and frustration. Your changes - should be to make the flexibility of the processor fit Linux, - not force arbitrary and non-workable memory mappings into Linux. - - - You don't want to change KERNELLOAD or KERNELBASE, otherwise the - virtual memory and MMU code will get confused. - - arch/ppc/Makefile:KERNELLOAD = 0xc0000000 - - include/asm-ppc/page.h:#define PAGE_OFFSET 0xc0000000 - include/asm-ppc/page.h:#define KERNELBASE PAGE_OFFSET - - - RAM is at physical address 0x00000000, and gets mapped to - virtual address 0xC0000000 for the kernel. - - - Physical addresses used by the Linux kernel: - -------------------------------------------- - - 0x00000000-0x3FFFFFFF 1GB reserved for RAM - 0xF0000000-0xF001FFFF 128K IMMR 64K used for dual port memory, - 64K for 8260 registers - - - Logical addresses used by the Linux kernel: - ------------------------------------------- - - 0xF0000000-0xFFFFFFFF 256M BAT0 (IMMR: dual port RAM, registers) - 0xE0000000-0xEFFFFFFF 256M BAT1 (I/O space for custom boards) - 0xC0000000-0xCFFFFFFF 256M BAT2 (RAM) - 0xD0000000-0xDFFFFFFF 256M BAT3 (if RAM > 256MByte) - - - EST SBC8260 Linux mapping: - -------------------------- - - DBAT0, IBAT0, cache inhibited: - - Chip - Memory Sel Use - --------------------- --- --------------------------------- - 0xF0000000-0xF001FFFF n/a IMMR: dual port RAM, registers - - DBAT1, IBAT1, cache inhibited: - -- GitLab From 6d0b365731682857ecc754163e7c5cb9edaae846 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 28 Jul 2008 22:31:02 +0900 Subject: [PATCH 0196/1024] sh: rsk7203: Add smc911x platform data. This hooks up platform data for the SMC9118 on the RSK+7203. Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/rsk7203/setup.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/sh/boards/renesas/rsk7203/setup.c b/arch/sh/boards/renesas/rsk7203/setup.c index 0bbda04b03b..ffbedc59a97 100644 --- a/arch/sh/boards/renesas/rsk7203/setup.c +++ b/arch/sh/boards/renesas/rsk7203/setup.c @@ -10,13 +10,20 @@ #include #include #include +#include #include #include #include #include +#include #include #include +static struct smc911x_platdata smc911x_info = { + .flags = SMC911X_USE_16BIT, + .irq_flags = IRQF_TRIGGER_LOW, +}; + static struct resource smc911x_resources[] = { [0] = { .start = 0x24000000, @@ -35,6 +42,9 @@ static struct platform_device smc911x_device = { .id = -1, .num_resources = ARRAY_SIZE(smc911x_resources), .resource = smc911x_resources, + .dev = { + .platform_data = &smc911x_info, + }, }; static const char *probes[] = { "cmdlinepart", NULL }; -- GitLab From 11325f035edba6ba4bc005d2cdebea19d7d8f388 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 28 Jul 2008 22:31:43 +0900 Subject: [PATCH 0197/1024] sh: rsk7203: update defconfig. Signed-off-by: Paul Mundt --- arch/sh/configs/rsk7203_defconfig | 179 ++++++++++++++++++++++++------ 1 file changed, 142 insertions(+), 37 deletions(-) diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig index a0ebd439cbd..840fe3843ff 100644 --- a/arch/sh/configs/rsk7203_defconfig +++ b/arch/sh/configs/rsk7203_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Tue Jun 3 13:02:42 2008 +# Linux kernel version: 2.6.26 +# Mon Jul 28 22:23:03 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -33,21 +33,22 @@ CONFIG_LOCALVERSION="" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +# CONFIG_IKCONFIG_PROC is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -72,26 +73,36 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y +# CONFIG_SLAB is not set # CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_SLOB=y CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_MODULES is not set +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -162,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -196,6 +209,7 @@ CONFIG_CPU_HAS_FPU=y # # Board support # +CONFIG_SH_RSK7203=y # # Timer and clock configuration @@ -274,6 +288,7 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel" # # Executable file formats # +CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y @@ -424,8 +439,8 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x20000000 -CONFIG_MTD_PHYSMAP_LEN=0x01000000 +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -456,9 +471,11 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -475,7 +492,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -487,15 +503,15 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set -CONFIG_SMC91X=y +# CONFIG_SMC91X is not set +CONFIG_SMC911X=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set -CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -503,6 +519,15 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -587,6 +612,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -605,6 +631,7 @@ CONFIG_SSB_POSSIBLE=y # Multimedia drivers # CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -618,26 +645,96 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +CONFIG_USB_R8A66597_HCD=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -677,6 +774,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -734,6 +832,7 @@ CONFIG_SYSFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y @@ -743,12 +842,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -775,16 +873,20 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_OBJECTS=y +# CONFIG_DEBUG_OBJECTS_SELFTEST is not set +# CONFIG_DEBUG_OBJECTS_FREE is not set +# CONFIG_DEBUG_OBJECTS_TIMERS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -797,12 +899,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set +CONFIG_DEBUG_VM=y +CONFIG_DEBUG_WRITECOUNT=y +# CONFIG_DEBUG_MEMORY_INIT is not set +CONFIG_DEBUG_LIST=y +CONFIG_DEBUG_SG=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set @@ -830,6 +934,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set -- GitLab From 103340cc36384c1afee4453b65a784d8b20d9d8d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 28 Jul 2008 22:32:03 +0900 Subject: [PATCH 0198/1024] sh: Fix up unaligned current_text_addr(). As noted by Adrian: Commit 3ab83521378268044a448113c6aa9a9e245f4d2f (kexec jump) causes the following build error on sh: <-- snip --> ... CC kernel/kexec.o {standard input}: Assembler messages: {standard input}:1518: Error: offset to unaligned destination make[2]: *** [kernel/kexec.o] Error 1 <-- snip --> If I understand the assembler correctly it fails at include/asm-sh/kexec.h:59 The issue here is that the mova reference lacks an explicit alignment, and previous code paths would end up with this on a 16-bit boundary, so we make the alignment explicit. Reported-by: Adrian Bunk Signed-off-by: Paul Mundt --- include/asm-sh/processor_32.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h index c6583f26707..0dadd75bd93 100644 --- a/include/asm-sh/processor_32.h +++ b/include/asm-sh/processor_32.h @@ -19,7 +19,7 @@ * Default implementation of macro that returns current * instruction pointer ("program counter"). */ -#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n1:":"=z" (pc)); pc; }) +#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n.align 2\n1:":"=z" (pc)); pc; }) /* Core Processor Version Register */ #define CCN_PVR 0xff000030 -- GitLab From 5c806b208b390969a6051543e96bb4eae40554ac Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 06:34:01 +0900 Subject: [PATCH 0199/1024] MAINTAINERS: Switch SUPERH to Supported. Apparently the SH entry ought to be Supported instead of Maintained, given the suble difference in terminology. Though it's been this way for years now, thanks to Renesas. Signed-off-by: Paul Mundt --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index deedc0d827b..5f043d19ced 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3968,7 +3968,7 @@ M: lethal@linux-sh.org L: linux-sh@vger.kernel.org W: http://www.linux-sh.org T: git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git -S: Maintained +S: Supported SUN3/3X P: Sam Creasey -- GitLab From 25326277d8d1393d1c66240e6255aca780f9e3eb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 06:39:26 +0900 Subject: [PATCH 0200/1024] video: Kill off leaked CONFIG_FB_SH7343VOU reference. This came in with the SH-Mobile LCDC changes in commit cfb4f5d1750e05f43902197713c50c29e7dfbc99, kill it off. Reported-by: Robert P. J. Day Signed-off-by: Paul Mundt --- drivers/video/Makefile | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 0ebc1bfd251..a6b55297a7f 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -118,7 +118,6 @@ obj-$(CONFIG_FB_PS3) += ps3fb.o obj-$(CONFIG_FB_SM501) += sm501fb.o obj-$(CONFIG_FB_XILINX) += xilinxfb.o obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o -obj-$(CONFIG_FB_SH7343VOU) += sh7343_voufb.o obj-$(CONFIG_FB_OMAP) += omap/ obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o obj-$(CONFIG_FB_CARMINE) += carminefb.o -- GitLab From 905a09d57afcc49511de18a95605c11ad9c88649 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 6 Jun 2008 16:34:03 +0800 Subject: [PATCH 0201/1024] [ARM] pxa: add support for L2 outer cache on XScale3 (attempt 2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit (20072fd0c93349e19527dd2fa9588b4335960e62 lost most of its changes somehow, came from a mbox archive applied with git-am. No idea what happened. This puts back the missing bits. --rmk) The initial patch from Lothar, and Lennert make it into a cleaner one, modified and tested on PXA320 by Eric Miao. This patch moves the L2 cache operations out of proc-xsc3.S into dedicated outer cache support code. CACHE_XSC3L2 can be deselected so no L2 cache specific code will be linked in, and that L2 enable bit will not be set, this applies to the following cases: a. _only_ PXA300/PXA310 support included and no L2 cache wanted b. PXA320 support included, but want L2 be disabled So the enabling of L2 depends on two things: - CACHE_XSC3L2 is selected - and L2 cache is present Where the latter is only a safeguard (previous testing shows it works OK even when this bit is turned on). IXP series of processors with XScale3 cannot disable L2 cache for the moment since they depend on the L2 cache for its coherent memory, so IXP may always select CACHE_XSC3L2. Other L2 relevant bits are always turned on (i.e. the original code enclosed by #if L2_CACHE_ENABLED .. #endif), as they showed no side effects. Specifically, these bits are: - OC bits in TTBASE register (table walk outer cache attributes) - LLR Outer Cache Attributes (OC) in Auxiliary Control Register Signed-off-by: Lothar WaÃ<9f>mann Signed-off-by: Lennert Buytenhek Signed-off-by: Eric Miao Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 8 ++ arch/arm/mm/cache-xsc3l2.c | 182 +++++++++++++++++++++++++++++++++++++ arch/arm/mm/proc-xsc3.S | 22 ----- 3 files changed, 190 insertions(+), 22 deletions(-) create mode 100644 arch/arm/mm/cache-xsc3l2.c diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 399d1d66bf9..ed15f876c72 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -742,3 +742,11 @@ config CACHE_L2X0 select OUTER_CACHE help This option enables the L2x0 PrimeCell. + +config CACHE_XSC3L2 + bool "Enable the L2 cache on XScale3" + depends on CPU_XSC3 + default y + select OUTER_CACHE + help + This option enables the L2 cache on XScale3. diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c new file mode 100644 index 00000000000..158bd96763d --- /dev/null +++ b/arch/arm/mm/cache-xsc3l2.c @@ -0,0 +1,182 @@ +/* + * arch/arm/mm/cache-xsc3l2.c - XScale3 L2 cache controller support + * + * Copyright (C) 2007 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include + +#include +#include +#include + +#define CR_L2 (1 << 26) + +#define CACHE_LINE_SIZE 32 +#define CACHE_LINE_SHIFT 5 +#define CACHE_WAY_PER_SET 8 + +#define CACHE_WAY_SIZE(l2ctype) (8192 << (((l2ctype) >> 8) & 0xf)) +#define CACHE_SET_SIZE(l2ctype) (CACHE_WAY_SIZE(l2ctype) >> CACHE_LINE_SHIFT) + +static inline int xsc3_l2_present(void) +{ + unsigned long l2ctype; + + __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype)); + + return !!(l2ctype & 0xf8); +} + +static inline void xsc3_l2_clean_mva(unsigned long addr) +{ + __asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr)); +} + +static inline void xsc3_l2_clean_pa(unsigned long addr) +{ + xsc3_l2_clean_mva(__phys_to_virt(addr)); +} + +static inline void xsc3_l2_inv_mva(unsigned long addr) +{ + __asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr)); +} + +static inline void xsc3_l2_inv_pa(unsigned long addr) +{ + xsc3_l2_inv_mva(__phys_to_virt(addr)); +} + +static inline void xsc3_l2_inv_all(void) +{ + unsigned long l2ctype, set_way; + int set, way; + + __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype)); + + for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) { + for (way = 0; way < CACHE_WAY_PER_SET; way++) { + set_way = (way << 29) | (set << 5); + __asm__("mcr p15, 1, %0, c7, c11, 2" : : "r"(set_way)); + } + } + + dsb(); +} + +static void xsc3_l2_inv_range(unsigned long start, unsigned long end) +{ + if (start == 0 && end == -1ul) { + xsc3_l2_inv_all(); + return; + } + + /* + * Clean and invalidate partial first cache line. + */ + if (start & (CACHE_LINE_SIZE - 1)) { + xsc3_l2_clean_pa(start & ~(CACHE_LINE_SIZE - 1)); + xsc3_l2_inv_pa(start & ~(CACHE_LINE_SIZE - 1)); + start = (start | (CACHE_LINE_SIZE - 1)) + 1; + } + + /* + * Clean and invalidate partial last cache line. + */ + if (end & (CACHE_LINE_SIZE - 1)) { + xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1)); + xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1)); + end &= ~(CACHE_LINE_SIZE - 1); + } + + /* + * Invalidate all full cache lines between 'start' and 'end'. + */ + while (start != end) { + xsc3_l2_inv_pa(start); + start += CACHE_LINE_SIZE; + } + + dsb(); +} + +static void xsc3_l2_clean_range(unsigned long start, unsigned long end) +{ + start &= ~(CACHE_LINE_SIZE - 1); + while (start < end) { + xsc3_l2_clean_pa(start); + start += CACHE_LINE_SIZE; + } + + dsb(); +} + +/* + * optimize L2 flush all operation by set/way format + */ +static inline void xsc3_l2_flush_all(void) +{ + unsigned long l2ctype, set_way; + int set, way; + + __asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype)); + + for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) { + for (way = 0; way < CACHE_WAY_PER_SET; way++) { + set_way = (way << 29) | (set << 5); + __asm__("mcr p15, 1, %0, c7, c15, 2" : : "r"(set_way)); + } + } + + dsb(); +} + +static void xsc3_l2_flush_range(unsigned long start, unsigned long end) +{ + if (start == 0 && end == -1ul) { + xsc3_l2_flush_all(); + return; + } + + start &= ~(CACHE_LINE_SIZE - 1); + while (start < end) { + xsc3_l2_clean_pa(start); + xsc3_l2_inv_pa(start); + start += CACHE_LINE_SIZE; + } + + dsb(); +} + +static int __init xsc3_l2_init(void) +{ + if (!cpu_is_xsc3() || !xsc3_l2_present()) + return 0; + + if (!(get_cr() & CR_L2)) { + pr_info("XScale3 L2 cache enabled.\n"); + adjust_cr(CR_L2, CR_L2); + xsc3_l2_inv_all(); + } + + outer_cache.inv_range = xsc3_l2_inv_range; + outer_cache.clean_range = xsc3_l2_clean_range; + outer_cache.flush_range = xsc3_l2_flush_range; + + return 0; +} +core_initcall(xsc3_l2_init); diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 3533741a76f..6ff53c24510 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -51,11 +51,6 @@ */ #define CACHESIZE 32768 -/* - * Run with L2 enabled. - */ -#define L2_CACHE_ENABLE 1 - /* * This macro is used to wait for a CP15 write and is needed when we * have to ensure that the last operation to the coprocessor was @@ -265,12 +260,9 @@ ENTRY(xsc3_dma_inv_range) tst r0, #CACHELINESIZE - 1 bic r0, r0, #CACHELINESIZE - 1 mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D line - mcrne p15, 1, r0, c7, c11, 1 @ clean L2 line tst r1, #CACHELINESIZE - 1 mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D line - mcrne p15, 1, r1, c7, c11, 1 @ clean L2 line 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D line - mcr p15, 1, r0, c7, c7, 1 @ invalidate L2 line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b @@ -288,7 +280,6 @@ ENTRY(xsc3_dma_inv_range) ENTRY(xsc3_dma_clean_range) bic r0, r0, #CACHELINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line - mcr p15, 1, r0, c7, c11, 1 @ clean L2 line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b @@ -306,8 +297,6 @@ ENTRY(xsc3_dma_clean_range) ENTRY(xsc3_dma_flush_range) bic r0, r0, #CACHELINESIZE - 1 1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line - mcr p15, 1, r0, c7, c11, 1 @ clean L2 line - mcr p15, 1, r0, c7, c7, 1 @ invalidate L2 line add r0, r0, #CACHELINESIZE cmp r0, r1 blo 1b @@ -347,9 +336,7 @@ ENTRY(cpu_xsc3_switch_mm) mcr p15, 0, ip, c7, c5, 0 @ invalidate L1 I cache and BTB mcr p15, 0, ip, c7, c10, 4 @ data write barrier mcr p15, 0, ip, c7, c5, 4 @ prefetch flush -#ifdef L2_CACHE_ENABLE orr r0, r0, #0x18 @ cache the page table in L2 -#endif mcr p15, 0, r0, c2, c0, 0 @ load page table pointer mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs cpwait_ret lr, ip @@ -378,12 +365,10 @@ ENTRY(cpu_xsc3_set_pte_ext) orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w @ combined with user -> user r/w -#if L2_CACHE_ENABLE @ If it's cacheable, it needs to be in L2 also. eor ip, r1, #L_PTE_CACHEABLE tst ip, #L_PTE_CACHEABLE orreq r2, r2, #PTE_EXT_TEX(0x5) -#endif tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young? movne r2, #0 @ no -> fault @@ -408,9 +393,7 @@ __xsc3_setup: mcr p15, 0, ip, c7, c10, 4 @ data write barrier mcr p15, 0, ip, c7, c5, 4 @ prefetch flush mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs -#if L2_CACHE_ENABLE orr r4, r4, #0x18 @ cache the page table in L2 -#endif mcr p15, 0, r4, c2, c0, 0 @ load page table pointer mov r0, #0 @ don't allow CP access @@ -418,9 +401,7 @@ __xsc3_setup: mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg and r0, r0, #2 @ preserve bit P bit setting -#if L2_CACHE_ENABLE orr r0, r0, #(1 << 10) @ enable L2 for LLR cache -#endif mcr p15, 0, r0, c1, c0, 1 @ set auxiliary control reg adr r5, xsc3_crval @@ -429,9 +410,6 @@ __xsc3_setup: bic r0, r0, r5 @ ..V. ..R. .... ..A. orr r0, r0, r6 @ ..VI Z..S .... .C.M (mmu) @ ...I Z..S .... .... (uc) -#if L2_CACHE_ENABLE - orr r0, r0, #0x04000000 @ L2 enable -#endif mov pc, lr .size __xsc3_setup, . - __xsc3_setup -- GitLab From f15cbe6f1a4b4d9df59142fc8e4abb973302cf44 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 08:09:44 +0900 Subject: [PATCH 0202/1024] sh: migrate to arch/sh/include/ This follows the sparc changes a439fe51a1f8eb087c22dd24d69cebae4a3addac. Most of the moving about was done with Sam's directions at: http://marc.info/?l=linux-sh&m=121724823706062&w=2 with subsequent hacking and fixups entirely my fault. Signed-off-by: Sam Ravnborg Signed-off-by: Paul Mundt --- arch/sh/Makefile | 61 +++------------- arch/sh/boards/cayman/irq.c | 2 +- arch/sh/boards/cayman/setup.c | 2 +- arch/sh/boards/dreamcast/irq.c | 2 +- arch/sh/boards/dreamcast/setup.c | 4 +- arch/sh/boards/hp6xx/pm.c | 2 +- arch/sh/boards/hp6xx/pm_wakeup.S | 2 +- arch/sh/boards/hp6xx/setup.c | 2 +- arch/sh/boards/landisk/gio.c | 4 +- arch/sh/boards/landisk/irq.c | 2 +- arch/sh/boards/landisk/psw.c | 2 +- arch/sh/boards/landisk/setup.c | 2 +- arch/sh/boards/renesas/r7780rp/psw.c | 2 +- arch/sh/boards/se/7343/io.c | 2 +- arch/sh/boards/se/7343/setup.c | 4 +- arch/sh/boards/sh03/setup.c | 4 +- arch/sh/boards/snapgear/setup.c | 2 +- arch/sh/boot/compressed/head_64.S | 4 +- arch/sh/drivers/dma/dma-g2.c | 4 +- arch/sh/drivers/dma/dma-pvr2.c | 4 +- arch/sh/drivers/dma/dma-sh.c | 2 +- arch/sh/drivers/dma/dma-sh.h | 2 +- arch/sh/drivers/pci/fixups-dreamcast.c | 2 +- arch/sh/drivers/pci/ops-cayman.c | 2 +- arch/sh/drivers/pci/ops-dreamcast.c | 2 +- arch/sh/drivers/pci/pci-sh5.c | 2 +- .../asm-sh => arch/sh/include/asm}/.gitignore | 2 - .../asm-sh => arch/sh/include/asm}/Kbuild | 0 .../asm-sh => arch/sh/include/asm}/a.out.h | 0 {include/asm-sh => arch/sh/include/asm}/adc.h | 2 +- .../sh/include/asm}/addrspace.h | 2 +- .../sh/include/asm}/atomic-grb.h | 0 .../sh/include/asm}/atomic-irq.h | 0 .../sh/include/asm}/atomic-llsc.h | 0 .../asm-sh => arch/sh/include/asm}/atomic.h | 0 .../asm-sh => arch/sh/include/asm}/auxvec.h | 0 .../sh/include/asm}/bitops-grb.h | 0 .../sh/include/asm}/bitops-irq.h | 0 .../asm-sh => arch/sh/include/asm}/bitops.h | 0 {include/asm-sh => arch/sh/include/asm}/bug.h | 0 .../asm-sh => arch/sh/include/asm}/bugs.h | 0 .../sh/include/asm}/byteorder.h | 0 .../asm-sh => arch/sh/include/asm}/cache.h | 2 +- .../sh/include/asm}/cacheflush.h | 2 +- .../asm-sh => arch/sh/include/asm}/checksum.h | 0 .../sh/include/asm}/checksum_32.h | 0 .../sh/include/asm}/checksum_64.h | 0 .../asm-sh => arch/sh/include/asm}/clock.h | 0 .../sh/include/asm}/cmpxchg-grb.h | 0 .../sh/include/asm}/cmpxchg-irq.h | 0 .../sh/include/asm}/cpu-features.h | 0 .../asm-sh => arch/sh/include/asm}/cputime.h | 0 .../asm-sh => arch/sh/include/asm}/current.h | 0 .../asm-sh => arch/sh/include/asm}/delay.h | 0 .../asm-sh => arch/sh/include/asm}/device.h | 0 .../asm-sh => arch/sh/include/asm}/div64.h | 0 .../sh/include/asm}/dma-mapping.h | 0 {include/asm-sh => arch/sh/include/asm}/dma.h | 2 +- .../asm-sh => arch/sh/include/asm}/dmabrg.h | 0 .../sh/include/asm}/edosk7705.h | 0 {include/asm-sh => arch/sh/include/asm}/elf.h | 0 .../sh/include/asm}/emergency-restart.h | 0 .../sh/include/asm}/entry-macros.S | 0 .../asm-sh => arch/sh/include/asm}/errno.h | 0 {include/asm-sh => arch/sh/include/asm}/fb.h | 0 .../asm-sh => arch/sh/include/asm}/fcntl.h | 0 .../asm-sh => arch/sh/include/asm}/fixmap.h | 0 .../asm-sh => arch/sh/include/asm}/flat.h | 0 {include/asm-sh => arch/sh/include/asm}/fpu.h | 0 .../asm-sh => arch/sh/include/asm}/freq.h | 2 +- .../sh/include/asm}/futex-irq.h | 0 .../asm-sh => arch/sh/include/asm}/futex.h | 0 .../asm-sh => arch/sh/include/asm}/gpio.h | 2 +- .../asm-sh => arch/sh/include/asm}/hardirq.h | 0 .../asm-sh => arch/sh/include/asm}/hd64461.h | 0 .../sh/include/asm}/hd64465/gpio.h | 0 .../sh/include/asm}/hd64465/hd64465.h | 0 .../sh/include/asm}/hd64465/io.h | 0 .../sh/include/asm}/heartbeat.h | 0 .../asm-sh => arch/sh/include/asm}/hp6xx.h | 0 .../asm-sh => arch/sh/include/asm}/hugetlb.h | 0 .../asm-sh => arch/sh/include/asm}/hw_irq.h | 0 .../sh/include/asm}/i2c-sh7760.h | 0 .../asm-sh => arch/sh/include/asm}/ilsel.h | 0 {include/asm-sh => arch/sh/include/asm}/io.h | 0 .../sh/include/asm}/io_generic.h | 0 .../sh/include/asm}/io_trapped.h | 0 .../asm-sh => arch/sh/include/asm}/ioctl.h | 0 .../asm-sh => arch/sh/include/asm}/ioctls.h | 0 .../asm-sh => arch/sh/include/asm}/ipcbuf.h | 0 {include/asm-sh => arch/sh/include/asm}/irq.h | 2 +- .../asm-sh => arch/sh/include/asm}/irq_regs.h | 0 .../asm-sh => arch/sh/include/asm}/irqflags.h | 0 .../sh/include/asm}/irqflags_32.h | 0 .../sh/include/asm}/irqflags_64.h | 2 +- .../asm-sh => arch/sh/include/asm}/kdebug.h | 0 .../asm-sh => arch/sh/include/asm}/kexec.h | 0 .../asm-sh => arch/sh/include/asm}/kgdb.h | 0 .../sh/include/asm}/kmap_types.h | 0 .../asm-sh => arch/sh/include/asm}/lboxre2.h | 0 .../asm-sh => arch/sh/include/asm}/linkage.h | 0 .../asm-sh => arch/sh/include/asm}/local.h | 0 .../asm-sh => arch/sh/include/asm}/machvec.h | 0 .../sh/include/asm}/magicpanelr2.h | 0 .../sh/include/asm}/mc146818rtc.h | 0 .../asm-sh => arch/sh/include/asm}/microdev.h | 0 .../asm-sh => arch/sh/include/asm}/migor.h | 0 .../asm-sh => arch/sh/include/asm}/mman.h | 0 {include/asm-sh => arch/sh/include/asm}/mmu.h | 0 .../sh/include/asm}/mmu_context.h | 2 +- .../sh/include/asm}/mmu_context_32.h | 0 .../sh/include/asm}/mmu_context_64.h | 2 +- .../asm-sh => arch/sh/include/asm}/mmzone.h | 0 .../asm-sh => arch/sh/include/asm}/module.h | 0 .../asm-sh => arch/sh/include/asm}/msgbuf.h | 0 .../asm-sh => arch/sh/include/asm}/mutex.h | 0 .../asm-sh => arch/sh/include/asm}/page.h | 0 .../asm-sh => arch/sh/include/asm}/param.h | 0 .../asm-sh => arch/sh/include/asm}/parport.h | 0 {include/asm-sh => arch/sh/include/asm}/pci.h | 0 .../asm-sh => arch/sh/include/asm}/percpu.h | 0 .../asm-sh => arch/sh/include/asm}/pgalloc.h | 0 .../asm-sh => arch/sh/include/asm}/pgtable.h | 0 .../sh/include/asm}/pgtable_32.h | 0 .../sh/include/asm}/pgtable_64.h | 0 {include/asm-sh => arch/sh/include/asm}/pm.h | 0 .../asm-sh => arch/sh/include/asm}/poll.h | 0 .../sh/include/asm}/posix_types.h | 0 .../sh/include/asm}/posix_types_32.h | 0 .../sh/include/asm}/posix_types_64.h | 0 .../sh/include/asm}/processor.h | 0 .../sh/include/asm}/processor_32.h | 0 .../sh/include/asm}/processor_64.h | 2 +- .../asm-sh => arch/sh/include/asm}/ptrace.h | 0 .../sh/include/asm}/push-switch.h | 0 .../asm-sh => arch/sh/include/asm}/r7780rp.h | 0 .../asm-sh => arch/sh/include/asm}/resource.h | 0 {include/asm-sh => arch/sh/include/asm}/rtc.h | 2 +- .../sh/include/asm}/rts7751r2d.h | 0 .../asm-sh => arch/sh/include/asm}/rwsem.h | 0 .../sh/include/asm}/scatterlist.h | 0 .../asm-sh => arch/sh/include/asm}/sdk7780.h | 0 {include/asm-sh => arch/sh/include/asm}/se.h | 0 .../asm-sh => arch/sh/include/asm}/se7206.h | 0 .../asm-sh => arch/sh/include/asm}/se7343.h | 0 .../asm-sh => arch/sh/include/asm}/se7721.h | 0 .../asm-sh => arch/sh/include/asm}/se7722.h | 0 .../asm-sh => arch/sh/include/asm}/se7751.h | 0 .../asm-sh => arch/sh/include/asm}/se7780.h | 0 .../asm-sh => arch/sh/include/asm}/sections.h | 0 .../asm-sh => arch/sh/include/asm}/segment.h | 0 .../asm-sh => arch/sh/include/asm}/sembuf.h | 0 .../asm-sh => arch/sh/include/asm}/serial.h | 2 +- .../asm-sh => arch/sh/include/asm}/setup.h | 0 .../sh/include/asm}/sfp-machine.h | 0 .../asm-sh => arch/sh/include/asm}/sh7760fb.h | 0 .../sh/include/asm}/sh7763rdp.h | 0 .../sh/include/asm}/sh7785lcr.h | 0 .../asm-sh => arch/sh/include/asm}/sh_bios.h | 0 .../asm-sh => arch/sh/include/asm}/sh_keysc.h | 0 .../sh/include/asm}/sh_mobile_lcdc.h | 0 .../asm-sh => arch/sh/include/asm}/shmbuf.h | 0 .../asm-sh => arch/sh/include/asm}/shmin.h | 0 .../asm-sh => arch/sh/include/asm}/shmparam.h | 0 .../sh/include/asm}/sigcontext.h | 0 .../asm-sh => arch/sh/include/asm}/siginfo.h | 0 .../asm-sh => arch/sh/include/asm}/signal.h | 0 .../sh/include/asm}/smc37c93x.h | 0 {include/asm-sh => arch/sh/include/asm}/smp.h | 0 .../asm-sh => arch/sh/include/asm}/snapgear.h | 0 .../asm-sh => arch/sh/include/asm}/socket.h | 0 .../asm-sh => arch/sh/include/asm}/sockios.h | 0 .../sh/include/asm}/sparsemem.h | 0 {include/asm-sh => arch/sh/include/asm}/spi.h | 0 .../asm-sh => arch/sh/include/asm}/spinlock.h | 0 .../sh/include/asm}/spinlock_types.h | 0 .../asm-sh => arch/sh/include/asm}/stat.h | 0 .../asm-sh => arch/sh/include/asm}/statfs.h | 0 .../asm-sh => arch/sh/include/asm}/string.h | 0 .../sh/include/asm}/string_32.h | 0 .../sh/include/asm}/string_64.h | 0 .../asm-sh => arch/sh/include/asm}/system.h | 0 .../sh/include/asm}/system_32.h | 0 .../sh/include/asm}/system_64.h | 0 .../sh/include/asm}/systemh7751.h | 0 .../asm-sh => arch/sh/include/asm}/termbits.h | 0 .../asm-sh => arch/sh/include/asm}/termios.h | 0 .../sh/include/asm}/thread_info.h | 0 .../asm-sh => arch/sh/include/asm}/timer.h | 2 +- .../asm-sh => arch/sh/include/asm}/timex.h | 0 .../asm-sh => arch/sh/include/asm}/titan.h | 0 {include/asm-sh => arch/sh/include/asm}/tlb.h | 0 .../asm-sh => arch/sh/include/asm}/tlb_64.h | 0 .../asm-sh => arch/sh/include/asm}/tlbflush.h | 0 .../asm-sh => arch/sh/include/asm}/topology.h | 0 .../asm-sh => arch/sh/include/asm}/types.h | 0 .../asm-sh => arch/sh/include/asm}/uaccess.h | 0 .../sh/include/asm}/uaccess_32.h | 0 .../sh/include/asm}/uaccess_64.h | 0 {include/asm-sh => arch/sh/include/asm}/ubc.h | 2 +- .../asm-sh => arch/sh/include/asm}/ucontext.h | 0 .../sh/include/asm}/unaligned.h | 0 .../asm-sh => arch/sh/include/asm}/unistd.h | 0 .../sh/include/asm}/unistd_32.h | 0 .../sh/include/asm}/unistd_64.h | 0 .../asm-sh => arch/sh/include/asm}/user.h | 0 {include/asm-sh => arch/sh/include/asm}/vga.h | 0 .../asm-sh => arch/sh/include/asm}/watchdog.h | 4 +- {include/asm-sh => arch/sh/include/asm}/xor.h | 0 .../sh/include/cpu-sh2/cpu}/addrspace.h | 0 .../sh/include/cpu-sh2/cpu}/cache.h | 0 .../sh/include/cpu-sh2/cpu}/cacheflush.h | 0 .../sh/include/cpu-sh2/cpu}/dma.h | 0 .../sh/include/cpu-sh2/cpu}/freq.h | 0 .../sh/include/cpu-sh2/cpu}/mmu_context.h | 0 .../sh/include/cpu-sh2/cpu}/rtc.h | 0 .../sh/include/cpu-sh2/cpu}/sigcontext.h | 0 .../sh/include/cpu-sh2/cpu}/timer.h | 0 .../sh/include/cpu-sh2/cpu}/ubc.h | 0 .../sh/include/cpu-sh2/cpu}/watchdog.h | 0 .../sh/include/cpu-sh2a/cpu}/addrspace.h | 0 .../sh/include/cpu-sh2a/cpu}/cache.h | 0 arch/sh/include/cpu-sh2a/cpu/cacheflush.h | 44 ++++++++++++ arch/sh/include/cpu-sh2a/cpu/dma.h | 23 +++++++ .../sh/include/cpu-sh2a/cpu}/freq.h | 0 arch/sh/include/cpu-sh2a/cpu/mmu_context.h | 16 +++++ .../sh/include/cpu-sh2a/cpu}/rtc.h | 0 arch/sh/include/cpu-sh2a/cpu/timer.h | 6 ++ arch/sh/include/cpu-sh2a/cpu/ubc.h | 32 +++++++++ arch/sh/include/cpu-sh2a/cpu/watchdog.h | 69 +++++++++++++++++++ .../sh/include/cpu-sh3/cpu}/adc.h | 0 .../sh/include/cpu-sh3/cpu}/addrspace.h | 0 .../sh/include/cpu-sh3/cpu}/cache.h | 0 .../sh/include/cpu-sh3/cpu}/cacheflush.h | 0 .../sh/include/cpu-sh3/cpu}/dac.h | 0 .../sh/include/cpu-sh3/cpu}/dma.h | 0 .../sh/include/cpu-sh3/cpu}/freq.h | 0 .../sh/include/cpu-sh3/cpu}/gpio.h | 0 .../sh/include/cpu-sh3/cpu}/mmu_context.h | 0 .../sh/include/cpu-sh3/cpu}/rtc.h | 0 .../sh/include/cpu-sh3/cpu}/sigcontext.h | 0 .../sh/include/cpu-sh3/cpu}/timer.h | 0 .../sh/include/cpu-sh3/cpu}/ubc.h | 0 .../sh/include/cpu-sh3/cpu}/watchdog.h | 0 .../sh/include/cpu-sh4/cpu}/addrspace.h | 0 .../sh/include/cpu-sh4/cpu}/cache.h | 0 .../sh/include/cpu-sh4/cpu}/cacheflush.h | 0 .../sh/include/cpu-sh4/cpu}/dma-sh7780.h | 0 .../sh/include/cpu-sh4/cpu}/dma.h | 2 +- .../sh/include/cpu-sh4/cpu}/fpu.h | 0 .../sh/include/cpu-sh4/cpu}/freq.h | 0 .../sh/include/cpu-sh4/cpu}/mmu_context.h | 0 .../sh/include/cpu-sh4/cpu}/rtc.h | 0 .../sh/include/cpu-sh4/cpu}/sigcontext.h | 0 .../sh/include/cpu-sh4/cpu}/sq.h | 0 .../sh/include/cpu-sh4/cpu}/timer.h | 0 .../sh/include/cpu-sh4/cpu}/ubc.h | 0 .../sh/include/cpu-sh4/cpu}/watchdog.h | 0 .../sh/include/cpu-sh5/cpu}/addrspace.h | 0 .../sh/include/cpu-sh5/cpu}/cache.h | 0 .../sh/include/cpu-sh5/cpu}/cacheflush.h | 0 .../sh/include/cpu-sh5/cpu}/dma.h | 0 .../sh/include/cpu-sh5/cpu}/irq.h | 0 .../sh/include/cpu-sh5/cpu}/mmu_context.h | 0 .../sh/include/cpu-sh5/cpu}/registers.h | 0 .../sh/include/cpu-sh5/cpu}/rtc.h | 0 .../sh/include/cpu-sh5/cpu}/timer.h | 0 .../sh/include/mach-dreamcast/mach}/dma.h | 0 .../sh/include/mach-dreamcast/mach}/maple.h | 0 .../sh/include/mach-dreamcast/mach}/pci.h | 2 +- .../sh/include/mach-dreamcast/mach}/sysasic.h | 0 .../sh/include/mach-landisk/mach}/gio.h | 0 .../mach-landisk/mach}/iodata_landisk.h | 0 .../sh/include/mach-sh03/mach}/io.h | 0 .../sh/include/mach-sh03/mach}/sh03.h | 0 arch/sh/kernel/cpu/irq/intc-sh5.c | 2 +- arch/sh/kernel/cpu/sh2/entry.S | 2 +- arch/sh/kernel/cpu/sh2a/entry.S | 2 +- arch/sh/kernel/cpu/sh3/entry.S | 2 +- arch/sh/kernel/cpu/sh4/fpu.c | 2 +- arch/sh/kernel/cpu/sh4/softfloat.c | 2 +- arch/sh/kernel/cpu/sh4/sq.c | 2 +- arch/sh/kernel/cpu/sh5/entry.S | 2 +- arch/sh/kernel/head_64.S | 4 +- arch/sh/kernel/irq.c | 2 +- arch/sh/kernel/time_64.c | 4 +- arch/sh/lib64/panic.c | 2 +- arch/sh/mm/fault_64.c | 2 +- arch/sh/tools/Makefile | 4 +- include/asm-sh/cpu-sh2a/cacheflush.h | 1 - include/asm-sh/cpu-sh2a/dma.h | 1 - include/asm-sh/cpu-sh2a/mmu_context.h | 1 - include/asm-sh/cpu-sh2a/timer.h | 1 - include/asm-sh/cpu-sh2a/ubc.h | 1 - include/asm-sh/cpu-sh2a/watchdog.h | 1 - sound/sh/aica.c | 2 +- 296 files changed, 268 insertions(+), 131 deletions(-) rename {include/asm-sh => arch/sh/include/asm}/.gitignore (57%) rename {include/asm-sh => arch/sh/include/asm}/Kbuild (100%) rename {include/asm-sh => arch/sh/include/asm}/a.out.h (100%) rename {include/asm-sh => arch/sh/include/asm}/adc.h (88%) rename {include/asm-sh => arch/sh/include/asm}/addrspace.h (98%) rename {include/asm-sh => arch/sh/include/asm}/atomic-grb.h (100%) rename {include/asm-sh => arch/sh/include/asm}/atomic-irq.h (100%) rename {include/asm-sh => arch/sh/include/asm}/atomic-llsc.h (100%) rename {include/asm-sh => arch/sh/include/asm}/atomic.h (100%) rename {include/asm-sh => arch/sh/include/asm}/auxvec.h (100%) rename {include/asm-sh => arch/sh/include/asm}/bitops-grb.h (100%) rename {include/asm-sh => arch/sh/include/asm}/bitops-irq.h (100%) rename {include/asm-sh => arch/sh/include/asm}/bitops.h (100%) rename {include/asm-sh => arch/sh/include/asm}/bug.h (100%) rename {include/asm-sh => arch/sh/include/asm}/bugs.h (100%) rename {include/asm-sh => arch/sh/include/asm}/byteorder.h (100%) rename {include/asm-sh => arch/sh/include/asm}/cache.h (97%) rename {include/asm-sh => arch/sh/include/asm}/cacheflush.h (98%) rename {include/asm-sh => arch/sh/include/asm}/checksum.h (100%) rename {include/asm-sh => arch/sh/include/asm}/checksum_32.h (100%) rename {include/asm-sh => arch/sh/include/asm}/checksum_64.h (100%) rename {include/asm-sh => arch/sh/include/asm}/clock.h (100%) rename {include/asm-sh => arch/sh/include/asm}/cmpxchg-grb.h (100%) rename {include/asm-sh => arch/sh/include/asm}/cmpxchg-irq.h (100%) rename {include/asm-sh => arch/sh/include/asm}/cpu-features.h (100%) rename {include/asm-sh => arch/sh/include/asm}/cputime.h (100%) rename {include/asm-sh => arch/sh/include/asm}/current.h (100%) rename {include/asm-sh => arch/sh/include/asm}/delay.h (100%) rename {include/asm-sh => arch/sh/include/asm}/device.h (100%) rename {include/asm-sh => arch/sh/include/asm}/div64.h (100%) rename {include/asm-sh => arch/sh/include/asm}/dma-mapping.h (100%) rename {include/asm-sh => arch/sh/include/asm}/dma.h (99%) rename {include/asm-sh => arch/sh/include/asm}/dmabrg.h (100%) rename {include/asm-sh => arch/sh/include/asm}/edosk7705.h (100%) rename {include/asm-sh => arch/sh/include/asm}/elf.h (100%) rename {include/asm-sh => arch/sh/include/asm}/emergency-restart.h (100%) rename {include/asm-sh => arch/sh/include/asm}/entry-macros.S (100%) rename {include/asm-sh => arch/sh/include/asm}/errno.h (100%) rename {include/asm-sh => arch/sh/include/asm}/fb.h (100%) rename {include/asm-sh => arch/sh/include/asm}/fcntl.h (100%) rename {include/asm-sh => arch/sh/include/asm}/fixmap.h (100%) rename {include/asm-sh => arch/sh/include/asm}/flat.h (100%) rename {include/asm-sh => arch/sh/include/asm}/fpu.h (100%) rename {include/asm-sh => arch/sh/include/asm}/freq.h (94%) rename {include/asm-sh => arch/sh/include/asm}/futex-irq.h (100%) rename {include/asm-sh => arch/sh/include/asm}/futex.h (100%) rename {include/asm-sh => arch/sh/include/asm}/gpio.h (94%) rename {include/asm-sh => arch/sh/include/asm}/hardirq.h (100%) rename {include/asm-sh => arch/sh/include/asm}/hd64461.h (100%) rename {include/asm-sh => arch/sh/include/asm}/hd64465/gpio.h (100%) rename {include/asm-sh => arch/sh/include/asm}/hd64465/hd64465.h (100%) rename {include/asm-sh => arch/sh/include/asm}/hd64465/io.h (100%) rename {include/asm-sh => arch/sh/include/asm}/heartbeat.h (100%) rename {include/asm-sh => arch/sh/include/asm}/hp6xx.h (100%) rename {include/asm-sh => arch/sh/include/asm}/hugetlb.h (100%) rename {include/asm-sh => arch/sh/include/asm}/hw_irq.h (100%) rename {include/asm-sh => arch/sh/include/asm}/i2c-sh7760.h (100%) rename {include/asm-sh => arch/sh/include/asm}/ilsel.h (100%) rename {include/asm-sh => arch/sh/include/asm}/io.h (100%) rename {include/asm-sh => arch/sh/include/asm}/io_generic.h (100%) rename {include/asm-sh => arch/sh/include/asm}/io_trapped.h (100%) rename {include/asm-sh => arch/sh/include/asm}/ioctl.h (100%) rename {include/asm-sh => arch/sh/include/asm}/ioctls.h (100%) rename {include/asm-sh => arch/sh/include/asm}/ipcbuf.h (100%) rename {include/asm-sh => arch/sh/include/asm}/irq.h (97%) rename {include/asm-sh => arch/sh/include/asm}/irq_regs.h (100%) rename {include/asm-sh => arch/sh/include/asm}/irqflags.h (100%) rename {include/asm-sh => arch/sh/include/asm}/irqflags_32.h (100%) rename {include/asm-sh => arch/sh/include/asm}/irqflags_64.h (98%) rename {include/asm-sh => arch/sh/include/asm}/kdebug.h (100%) rename {include/asm-sh => arch/sh/include/asm}/kexec.h (100%) rename {include/asm-sh => arch/sh/include/asm}/kgdb.h (100%) rename {include/asm-sh => arch/sh/include/asm}/kmap_types.h (100%) rename {include/asm-sh => arch/sh/include/asm}/lboxre2.h (100%) rename {include/asm-sh => arch/sh/include/asm}/linkage.h (100%) rename {include/asm-sh => arch/sh/include/asm}/local.h (100%) rename {include/asm-sh => arch/sh/include/asm}/machvec.h (100%) rename {include/asm-sh => arch/sh/include/asm}/magicpanelr2.h (100%) rename {include/asm-sh => arch/sh/include/asm}/mc146818rtc.h (100%) rename {include/asm-sh => arch/sh/include/asm}/microdev.h (100%) rename {include/asm-sh => arch/sh/include/asm}/migor.h (100%) rename {include/asm-sh => arch/sh/include/asm}/mman.h (100%) rename {include/asm-sh => arch/sh/include/asm}/mmu.h (100%) rename {include/asm-sh => arch/sh/include/asm}/mmu_context.h (99%) rename {include/asm-sh => arch/sh/include/asm}/mmu_context_32.h (100%) rename {include/asm-sh => arch/sh/include/asm}/mmu_context_64.h (98%) rename {include/asm-sh => arch/sh/include/asm}/mmzone.h (100%) rename {include/asm-sh => arch/sh/include/asm}/module.h (100%) rename {include/asm-sh => arch/sh/include/asm}/msgbuf.h (100%) rename {include/asm-sh => arch/sh/include/asm}/mutex.h (100%) rename {include/asm-sh => arch/sh/include/asm}/page.h (100%) rename {include/asm-sh => arch/sh/include/asm}/param.h (100%) rename {include/asm-sh => arch/sh/include/asm}/parport.h (100%) rename {include/asm-sh => arch/sh/include/asm}/pci.h (100%) rename {include/asm-sh => arch/sh/include/asm}/percpu.h (100%) rename {include/asm-sh => arch/sh/include/asm}/pgalloc.h (100%) rename {include/asm-sh => arch/sh/include/asm}/pgtable.h (100%) rename {include/asm-sh => arch/sh/include/asm}/pgtable_32.h (100%) rename {include/asm-sh => arch/sh/include/asm}/pgtable_64.h (100%) rename {include/asm-sh => arch/sh/include/asm}/pm.h (100%) rename {include/asm-sh => arch/sh/include/asm}/poll.h (100%) rename {include/asm-sh => arch/sh/include/asm}/posix_types.h (100%) rename {include/asm-sh => arch/sh/include/asm}/posix_types_32.h (100%) rename {include/asm-sh => arch/sh/include/asm}/posix_types_64.h (100%) rename {include/asm-sh => arch/sh/include/asm}/processor.h (100%) rename {include/asm-sh => arch/sh/include/asm}/processor_32.h (100%) rename {include/asm-sh => arch/sh/include/asm}/processor_64.h (99%) rename {include/asm-sh => arch/sh/include/asm}/ptrace.h (100%) rename {include/asm-sh => arch/sh/include/asm}/push-switch.h (100%) rename {include/asm-sh => arch/sh/include/asm}/r7780rp.h (100%) rename {include/asm-sh => arch/sh/include/asm}/resource.h (100%) rename {include/asm-sh => arch/sh/include/asm}/rtc.h (92%) rename {include/asm-sh => arch/sh/include/asm}/rts7751r2d.h (100%) rename {include/asm-sh => arch/sh/include/asm}/rwsem.h (100%) rename {include/asm-sh => arch/sh/include/asm}/scatterlist.h (100%) rename {include/asm-sh => arch/sh/include/asm}/sdk7780.h (100%) rename {include/asm-sh => arch/sh/include/asm}/se.h (100%) rename {include/asm-sh => arch/sh/include/asm}/se7206.h (100%) rename {include/asm-sh => arch/sh/include/asm}/se7343.h (100%) rename {include/asm-sh => arch/sh/include/asm}/se7721.h (100%) rename {include/asm-sh => arch/sh/include/asm}/se7722.h (100%) rename {include/asm-sh => arch/sh/include/asm}/se7751.h (100%) rename {include/asm-sh => arch/sh/include/asm}/se7780.h (100%) rename {include/asm-sh => arch/sh/include/asm}/sections.h (100%) rename {include/asm-sh => arch/sh/include/asm}/segment.h (100%) rename {include/asm-sh => arch/sh/include/asm}/sembuf.h (100%) rename {include/asm-sh => arch/sh/include/asm}/serial.h (96%) rename {include/asm-sh => arch/sh/include/asm}/setup.h (100%) rename {include/asm-sh => arch/sh/include/asm}/sfp-machine.h (100%) rename {include/asm-sh => arch/sh/include/asm}/sh7760fb.h (100%) rename {include/asm-sh => arch/sh/include/asm}/sh7763rdp.h (100%) rename {include/asm-sh => arch/sh/include/asm}/sh7785lcr.h (100%) rename {include/asm-sh => arch/sh/include/asm}/sh_bios.h (100%) rename {include/asm-sh => arch/sh/include/asm}/sh_keysc.h (100%) rename {include/asm-sh => arch/sh/include/asm}/sh_mobile_lcdc.h (100%) rename {include/asm-sh => arch/sh/include/asm}/shmbuf.h (100%) rename {include/asm-sh => arch/sh/include/asm}/shmin.h (100%) rename {include/asm-sh => arch/sh/include/asm}/shmparam.h (100%) rename {include/asm-sh => arch/sh/include/asm}/sigcontext.h (100%) rename {include/asm-sh => arch/sh/include/asm}/siginfo.h (100%) rename {include/asm-sh => arch/sh/include/asm}/signal.h (100%) rename {include/asm-sh => arch/sh/include/asm}/smc37c93x.h (100%) rename {include/asm-sh => arch/sh/include/asm}/smp.h (100%) rename {include/asm-sh => arch/sh/include/asm}/snapgear.h (100%) rename {include/asm-sh => arch/sh/include/asm}/socket.h (100%) rename {include/asm-sh => arch/sh/include/asm}/sockios.h (100%) rename {include/asm-sh => arch/sh/include/asm}/sparsemem.h (100%) rename {include/asm-sh => arch/sh/include/asm}/spi.h (100%) rename {include/asm-sh => arch/sh/include/asm}/spinlock.h (100%) rename {include/asm-sh => arch/sh/include/asm}/spinlock_types.h (100%) rename {include/asm-sh => arch/sh/include/asm}/stat.h (100%) rename {include/asm-sh => arch/sh/include/asm}/statfs.h (100%) rename {include/asm-sh => arch/sh/include/asm}/string.h (100%) rename {include/asm-sh => arch/sh/include/asm}/string_32.h (100%) rename {include/asm-sh => arch/sh/include/asm}/string_64.h (100%) rename {include/asm-sh => arch/sh/include/asm}/system.h (100%) rename {include/asm-sh => arch/sh/include/asm}/system_32.h (100%) rename {include/asm-sh => arch/sh/include/asm}/system_64.h (100%) rename {include/asm-sh => arch/sh/include/asm}/systemh7751.h (100%) rename {include/asm-sh => arch/sh/include/asm}/termbits.h (100%) rename {include/asm-sh => arch/sh/include/asm}/termios.h (100%) rename {include/asm-sh => arch/sh/include/asm}/thread_info.h (100%) rename {include/asm-sh => arch/sh/include/asm}/timer.h (96%) rename {include/asm-sh => arch/sh/include/asm}/timex.h (100%) rename {include/asm-sh => arch/sh/include/asm}/titan.h (100%) rename {include/asm-sh => arch/sh/include/asm}/tlb.h (100%) rename {include/asm-sh => arch/sh/include/asm}/tlb_64.h (100%) rename {include/asm-sh => arch/sh/include/asm}/tlbflush.h (100%) rename {include/asm-sh => arch/sh/include/asm}/topology.h (100%) rename {include/asm-sh => arch/sh/include/asm}/types.h (100%) rename {include/asm-sh => arch/sh/include/asm}/uaccess.h (100%) rename {include/asm-sh => arch/sh/include/asm}/uaccess_32.h (100%) rename {include/asm-sh => arch/sh/include/asm}/uaccess_64.h (100%) rename {include/asm-sh => arch/sh/include/asm}/ubc.h (98%) rename {include/asm-sh => arch/sh/include/asm}/ucontext.h (100%) rename {include/asm-sh => arch/sh/include/asm}/unaligned.h (100%) rename {include/asm-sh => arch/sh/include/asm}/unistd.h (100%) rename {include/asm-sh => arch/sh/include/asm}/unistd_32.h (100%) rename {include/asm-sh => arch/sh/include/asm}/unistd_64.h (100%) rename {include/asm-sh => arch/sh/include/asm}/user.h (100%) rename {include/asm-sh => arch/sh/include/asm}/vga.h (100%) rename {include/asm-sh => arch/sh/include/asm}/watchdog.h (96%) rename {include/asm-sh => arch/sh/include/asm}/xor.h (100%) rename {include/asm-sh/cpu-sh2 => arch/sh/include/cpu-sh2/cpu}/addrspace.h (100%) rename {include/asm-sh/cpu-sh2 => arch/sh/include/cpu-sh2/cpu}/cache.h (100%) rename {include/asm-sh/cpu-sh2 => arch/sh/include/cpu-sh2/cpu}/cacheflush.h (100%) rename {include/asm-sh/cpu-sh2 => arch/sh/include/cpu-sh2/cpu}/dma.h (100%) rename {include/asm-sh/cpu-sh2 => arch/sh/include/cpu-sh2/cpu}/freq.h (100%) rename {include/asm-sh/cpu-sh2 => arch/sh/include/cpu-sh2/cpu}/mmu_context.h (100%) rename {include/asm-sh/cpu-sh2 => arch/sh/include/cpu-sh2/cpu}/rtc.h (100%) rename {include/asm-sh/cpu-sh2 => arch/sh/include/cpu-sh2/cpu}/sigcontext.h (100%) rename {include/asm-sh/cpu-sh2 => arch/sh/include/cpu-sh2/cpu}/timer.h (100%) rename {include/asm-sh/cpu-sh2 => arch/sh/include/cpu-sh2/cpu}/ubc.h (100%) rename {include/asm-sh/cpu-sh2 => arch/sh/include/cpu-sh2/cpu}/watchdog.h (100%) rename {include/asm-sh/cpu-sh2a => arch/sh/include/cpu-sh2a/cpu}/addrspace.h (100%) rename {include/asm-sh/cpu-sh2a => arch/sh/include/cpu-sh2a/cpu}/cache.h (100%) create mode 100644 arch/sh/include/cpu-sh2a/cpu/cacheflush.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/dma.h rename {include/asm-sh/cpu-sh2a => arch/sh/include/cpu-sh2a/cpu}/freq.h (100%) create mode 100644 arch/sh/include/cpu-sh2a/cpu/mmu_context.h rename {include/asm-sh/cpu-sh2a => arch/sh/include/cpu-sh2a/cpu}/rtc.h (100%) create mode 100644 arch/sh/include/cpu-sh2a/cpu/timer.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/ubc.h create mode 100644 arch/sh/include/cpu-sh2a/cpu/watchdog.h rename {include/asm-sh/cpu-sh3 => arch/sh/include/cpu-sh3/cpu}/adc.h (100%) rename {include/asm-sh/cpu-sh3 => arch/sh/include/cpu-sh3/cpu}/addrspace.h (100%) rename {include/asm-sh/cpu-sh3 => arch/sh/include/cpu-sh3/cpu}/cache.h (100%) rename {include/asm-sh/cpu-sh3 => arch/sh/include/cpu-sh3/cpu}/cacheflush.h (100%) rename {include/asm-sh/cpu-sh3 => arch/sh/include/cpu-sh3/cpu}/dac.h (100%) rename {include/asm-sh/cpu-sh3 => arch/sh/include/cpu-sh3/cpu}/dma.h (100%) rename {include/asm-sh/cpu-sh3 => arch/sh/include/cpu-sh3/cpu}/freq.h (100%) rename {include/asm-sh/cpu-sh3 => arch/sh/include/cpu-sh3/cpu}/gpio.h (100%) rename {include/asm-sh/cpu-sh3 => arch/sh/include/cpu-sh3/cpu}/mmu_context.h (100%) rename {include/asm-sh/cpu-sh3 => arch/sh/include/cpu-sh3/cpu}/rtc.h (100%) rename {include/asm-sh/cpu-sh3 => arch/sh/include/cpu-sh3/cpu}/sigcontext.h (100%) rename {include/asm-sh/cpu-sh3 => arch/sh/include/cpu-sh3/cpu}/timer.h (100%) rename {include/asm-sh/cpu-sh3 => arch/sh/include/cpu-sh3/cpu}/ubc.h (100%) rename {include/asm-sh/cpu-sh3 => arch/sh/include/cpu-sh3/cpu}/watchdog.h (100%) rename {include/asm-sh/cpu-sh4 => arch/sh/include/cpu-sh4/cpu}/addrspace.h (100%) rename {include/asm-sh/cpu-sh4 => arch/sh/include/cpu-sh4/cpu}/cache.h (100%) rename {include/asm-sh/cpu-sh4 => arch/sh/include/cpu-sh4/cpu}/cacheflush.h (100%) rename {include/asm-sh/cpu-sh4 => arch/sh/include/cpu-sh4/cpu}/dma-sh7780.h (100%) rename {include/asm-sh/cpu-sh4 => arch/sh/include/cpu-sh4/cpu}/dma.h (97%) rename {include/asm-sh/cpu-sh4 => arch/sh/include/cpu-sh4/cpu}/fpu.h (100%) rename {include/asm-sh/cpu-sh4 => arch/sh/include/cpu-sh4/cpu}/freq.h (100%) rename {include/asm-sh/cpu-sh4 => arch/sh/include/cpu-sh4/cpu}/mmu_context.h (100%) rename {include/asm-sh/cpu-sh4 => arch/sh/include/cpu-sh4/cpu}/rtc.h (100%) rename {include/asm-sh/cpu-sh4 => arch/sh/include/cpu-sh4/cpu}/sigcontext.h (100%) rename {include/asm-sh/cpu-sh4 => arch/sh/include/cpu-sh4/cpu}/sq.h (100%) rename {include/asm-sh/cpu-sh4 => arch/sh/include/cpu-sh4/cpu}/timer.h (100%) rename {include/asm-sh/cpu-sh4 => arch/sh/include/cpu-sh4/cpu}/ubc.h (100%) rename {include/asm-sh/cpu-sh4 => arch/sh/include/cpu-sh4/cpu}/watchdog.h (100%) rename {include/asm-sh/cpu-sh5 => arch/sh/include/cpu-sh5/cpu}/addrspace.h (100%) rename {include/asm-sh/cpu-sh5 => arch/sh/include/cpu-sh5/cpu}/cache.h (100%) rename {include/asm-sh/cpu-sh5 => arch/sh/include/cpu-sh5/cpu}/cacheflush.h (100%) rename {include/asm-sh/cpu-sh5 => arch/sh/include/cpu-sh5/cpu}/dma.h (100%) rename {include/asm-sh/cpu-sh5 => arch/sh/include/cpu-sh5/cpu}/irq.h (100%) rename {include/asm-sh/cpu-sh5 => arch/sh/include/cpu-sh5/cpu}/mmu_context.h (100%) rename {include/asm-sh/cpu-sh5 => arch/sh/include/cpu-sh5/cpu}/registers.h (100%) rename {include/asm-sh/cpu-sh5 => arch/sh/include/cpu-sh5/cpu}/rtc.h (100%) rename {include/asm-sh/cpu-sh5 => arch/sh/include/cpu-sh5/cpu}/timer.h (100%) rename {include/asm-sh/dreamcast => arch/sh/include/mach-dreamcast/mach}/dma.h (100%) rename {include/asm-sh/dreamcast => arch/sh/include/mach-dreamcast/mach}/maple.h (100%) rename {include/asm-sh/dreamcast => arch/sh/include/mach-dreamcast/mach}/pci.h (95%) rename {include/asm-sh/dreamcast => arch/sh/include/mach-dreamcast/mach}/sysasic.h (100%) rename {include/asm-sh/landisk => arch/sh/include/mach-landisk/mach}/gio.h (100%) rename {include/asm-sh/landisk => arch/sh/include/mach-landisk/mach}/iodata_landisk.h (100%) rename {include/asm-sh/sh03 => arch/sh/include/mach-sh03/mach}/io.h (100%) rename {include/asm-sh/sh03 => arch/sh/include/mach-sh03/mach}/sh03.h (100%) delete mode 100644 include/asm-sh/cpu-sh2a/cacheflush.h delete mode 100644 include/asm-sh/cpu-sh2a/dma.h delete mode 100644 include/asm-sh/cpu-sh2a/mmu_context.h delete mode 100644 include/asm-sh/cpu-sh2a/timer.h delete mode 100644 include/asm-sh/cpu-sh2a/ubc.h delete mode 100644 include/asm-sh/cpu-sh2a/watchdog.h diff --git a/arch/sh/Makefile b/arch/sh/Makefile index c627e45c4df..fbf87562831 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -91,8 +91,6 @@ LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' LDFLAGS += -EB endif -KBUILD_CFLAGS += -pipe $(cflags-y) -KBUILD_AFLAGS += $(cflags-y) head-y := arch/sh/kernel/init_task.o head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o @@ -160,57 +158,17 @@ drivers-$(CONFIG_OPROFILE) += arch/sh/oprofile/ boot := arch/sh/boot -ifneq ($(KBUILD_SRC),) -incdir-prefix := $(srctree)/include/asm-sh/ -else -incdir-prefix := -endif - -# Update machine arch and proc symlinks if something which affects -# them changed. We use .arch and .mach to indicate when they were -# updated last, otherwise make uses the target directory mtime. +cflags-y += -Iarch/sh/include/$(cpuincdir-y) +cflags-y += $(foreach d, $(incdir-y), -Iarch/sh/include/mach-$(d)) -include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \ - include/config/auto.conf FORCE - @echo ' SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)' - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi - $(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu - @touch $@ - -# Most boards have their own mach directories. For the ones that -# don't, just reference the parent directory so the semantics are -# kept roughly the same. -# -# When multiple boards are compiled in at the same time, preference -# for the mach link is given to whichever has a directory for its -# headers. However, this is only a workaround until platforms that -# can live in the same kernel image back away from relying on the -# mach link. - -include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \ - include/config/auto.conf FORCE - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi - $(Q)rm -f include/asm-sh/mach - $(Q)for i in $(incdir-y); do \ - if [ -d $(srctree)/include/asm-sh/$$i ]; then \ - echo -n ' SYMLINK include/asm-sh/mach -> '; \ - echo -e "include/asm-sh/$$i"; \ - ln -fsn $(incdir-prefix)$$i \ - include/asm-sh/mach; \ - else \ - if [ ! -d include/asm-sh/mach ]; then \ - echo -n ' SYMLINK include/asm-sh/mach -> '; \ - echo -e 'include/asm-sh'; \ - ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \ - fi; \ - fi; \ - done - @touch $@ +KBUILD_CFLAGS += -pipe $(cflags-y) +KBUILD_CPPFLAGS += $(cflags-y) +KBUILD_AFLAGS += $(cflags-y) PHONY += maketools FORCE maketools: include/linux/version.h FORCE - $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h + $(Q)$(MAKE) $(build)=arch/sh/tools arch/sh/include/asm/machtypes.h all: $(KBUILD_IMAGE) @@ -219,8 +177,7 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux compressed: zImage -archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools \ - arch/sh/lib64/syscalltab.h +archprepare: maketools arch/sh/lib64/syscalltab.h archclean: $(Q)$(MAKE) $(clean)=$(boot) @@ -262,6 +219,4 @@ arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S $(call filechk,gen-syscalltab) CLEAN_FILES += arch/sh/lib64/syscalltab.h \ - include/asm-sh/machtypes.h \ - include/asm-sh/cpu include/asm-sh/.cpu \ - include/asm-sh/mach include/asm-sh/.mach + arch/sh/include/asm/machtypes.h diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/cayman/irq.c index 30ec7bebfaf..ceb37ae92c7 100644 --- a/arch/sh/boards/cayman/irq.c +++ b/arch/sh/boards/cayman/irq.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include /* Setup for the SMSC FDC37C935 / LAN91C100FD */ diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/cayman/setup.c index 8c9fa472d8f..e7f9cc5f2ff 100644 --- a/arch/sh/boards/cayman/setup.c +++ b/arch/sh/boards/cayman/setup.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include /* * Platform Dependent Interrupt Priorities. diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c index 9d0673a9092..67bdc33dd41 100644 --- a/arch/sh/boards/dreamcast/irq.c +++ b/arch/sh/boards/dreamcast/irq.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include /* Dreamcast System ASIC Hardware Events - diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c index 2581c8cd5df..14c3e57ff41 100644 --- a/arch/sh/boards/dreamcast/setup.c +++ b/arch/sh/boards/dreamcast/setup.c @@ -25,8 +25,8 @@ #include #include #include -#include -#include +#include +#include extern struct hw_interrupt_type systemasic_int; extern void aica_time_init(void); diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c index d22f6eac9cc..e96684def78 100644 --- a/arch/sh/boards/hp6xx/pm.c +++ b/arch/sh/boards/hp6xx/pm.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #define STBCR 0xffffff82 diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/hp6xx/pm_wakeup.S index 45e9bf0b911..44b648cf6f2 100644 --- a/arch/sh/boards/hp6xx/pm_wakeup.S +++ b/arch/sh/boards/hp6xx/pm_wakeup.S @@ -8,7 +8,7 @@ */ #include -#include +#include #define k0 r0 #define k1 r1 diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c index 2f414ac3c69..475b46caec1 100644 --- a/arch/sh/boards/hp6xx/setup.c +++ b/arch/sh/boards/hp6xx/setup.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #define SCPCR 0xa4000116 #define SCPDR 0xa4000136 diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c index 0c15b0a50b9..edcde082032 100644 --- a/arch/sh/boards/landisk/gio.c +++ b/arch/sh/boards/landisk/gio.c @@ -20,8 +20,8 @@ #include #include #include -#include -#include +#include +#include #define DEVCOUNT 4 #define GIO_MINOR 2 /* GIO minor no. */ diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c index 258649491d4..d0f9378f6ff 100644 --- a/arch/sh/boards/landisk/irq.c +++ b/arch/sh/boards/landisk/irq.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include static void disable_landisk_irq(unsigned int irq) { diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/landisk/psw.c index 5a9b70b5dec..4bd502cbaee 100644 --- a/arch/sh/boards/landisk/psw.c +++ b/arch/sh/boards/landisk/psw.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include static irqreturn_t psw_irq_handler(int irq, void *arg) diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c index 2b708ec7255..470c7811168 100644 --- a/arch/sh/boards/landisk/setup.c +++ b/arch/sh/boards/landisk/setup.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include void init_landisk_IRQ(void); diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/renesas/r7780rp/psw.c index c844dfa5d58..0b3e062e96c 100644 --- a/arch/sh/boards/renesas/r7780rp/psw.c +++ b/arch/sh/boards/renesas/r7780rp/psw.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include static irqreturn_t psw_irq_handler(int irq, void *arg) diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/se/7343/io.c index 3a6d1142493..e2fae32d27d 100644 --- a/arch/sh/boards/se/7343/io.c +++ b/arch/sh/boards/se/7343/io.c @@ -6,7 +6,7 @@ */ #include #include -#include +#include #define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index 8ae718d6c71..59dc92e20f6 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -1,8 +1,8 @@ #include #include #include -#include -#include +#include +#include #include #include #include diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c index 934ac4f1c48..cd9cff1ed34 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/sh03/setup.c @@ -11,8 +11,8 @@ #include #include #include -#include -#include +#include +#include #include static void __init init_sh03_IRQ(void) diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c index 7022483f98e..a5e349d3dda 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/snapgear/setup.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include /* * EraseConfig handling functions diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S index f72c1989f5f..622eac3cf55 100644 --- a/arch/sh/boot/compressed/head_64.S +++ b/arch/sh/boot/compressed/head_64.S @@ -14,8 +14,8 @@ * Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com) */ #include -#include -#include +#include +#include /* * Fixed TLB entries to identity map the beginning of RAM diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c index 0caf11bb7e2..af7bb589c2c 100644 --- a/arch/sh/drivers/dma/dma-g2.c +++ b/arch/sh/drivers/dma/dma-g2.c @@ -14,8 +14,8 @@ #include #include #include -#include -#include +#include +#include #include struct g2_channel { diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c index 838fad566ea..391cbe1c295 100644 --- a/arch/sh/drivers/dma/dma-pvr2.c +++ b/arch/sh/drivers/dma/dma-pvr2.c @@ -13,8 +13,8 @@ #include #include #include -#include -#include +#include +#include #include #include diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 71ff3d6f26e..bd305483c14 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include "dma-sh.h" diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h index 0f591fbc922..b05af34fc15 100644 --- a/arch/sh/drivers/dma/dma-sh.h +++ b/arch/sh/drivers/dma/dma-sh.h @@ -11,7 +11,7 @@ #ifndef __DMA_SH_H #define __DMA_SH_H -#include +#include /* Definitions for the SuperH DMAC */ #define REQ_L 0x00000000 diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index c44699301ee..2bf85cf091e 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -26,7 +26,7 @@ #include #include -#include +#include static void __init gapspci_fixup_resources(struct pci_dev *dev) { diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c index 980275ffa30..5ccf9ea3a9d 100644 --- a/arch/sh/drivers/pci/ops-cayman.c +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -2,7 +2,7 @@ #include #include #include -#include +#include #include "pci-sh5.h" static inline u8 bridge_swizzle(u8 pin, u8 slot) diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index f54c291db37..f5d2a2aa6f3 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -26,7 +26,7 @@ #include #include -#include +#include static struct resource gapspci_io_resource = { .name = "GAPSPCI IO", diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index a00a4df8c02..7a97438762c 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include #include "pci-sh5.h" diff --git a/include/asm-sh/.gitignore b/arch/sh/include/asm/.gitignore similarity index 57% rename from include/asm-sh/.gitignore rename to arch/sh/include/asm/.gitignore index 9218ef82b69..378db779fb6 100644 --- a/include/asm-sh/.gitignore +++ b/arch/sh/include/asm/.gitignore @@ -1,3 +1 @@ -cpu -mach machtypes.h diff --git a/include/asm-sh/Kbuild b/arch/sh/include/asm/Kbuild similarity index 100% rename from include/asm-sh/Kbuild rename to arch/sh/include/asm/Kbuild diff --git a/include/asm-sh/a.out.h b/arch/sh/include/asm/a.out.h similarity index 100% rename from include/asm-sh/a.out.h rename to arch/sh/include/asm/a.out.h diff --git a/include/asm-sh/adc.h b/arch/sh/include/asm/adc.h similarity index 88% rename from include/asm-sh/adc.h rename to arch/sh/include/asm/adc.h index 5f85cf74d59..48824c1fab8 100644 --- a/include/asm-sh/adc.h +++ b/arch/sh/include/asm/adc.h @@ -5,7 +5,7 @@ * Copyright (C) 2004 Andriy Skulysh */ -#include +#include int adc_single(unsigned int channel); diff --git a/include/asm-sh/addrspace.h b/arch/sh/include/asm/addrspace.h similarity index 98% rename from include/asm-sh/addrspace.h rename to arch/sh/include/asm/addrspace.h index fa544fc38c2..2702d81bfc0 100644 --- a/include/asm-sh/addrspace.h +++ b/arch/sh/include/asm/addrspace.h @@ -12,7 +12,7 @@ #ifdef __KERNEL__ -#include +#include /* If this CPU supports segmentation, hook up the helpers */ #ifdef P1SEG diff --git a/include/asm-sh/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h similarity index 100% rename from include/asm-sh/atomic-grb.h rename to arch/sh/include/asm/atomic-grb.h diff --git a/include/asm-sh/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h similarity index 100% rename from include/asm-sh/atomic-irq.h rename to arch/sh/include/asm/atomic-irq.h diff --git a/include/asm-sh/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h similarity index 100% rename from include/asm-sh/atomic-llsc.h rename to arch/sh/include/asm/atomic-llsc.h diff --git a/include/asm-sh/atomic.h b/arch/sh/include/asm/atomic.h similarity index 100% rename from include/asm-sh/atomic.h rename to arch/sh/include/asm/atomic.h diff --git a/include/asm-sh/auxvec.h b/arch/sh/include/asm/auxvec.h similarity index 100% rename from include/asm-sh/auxvec.h rename to arch/sh/include/asm/auxvec.h diff --git a/include/asm-sh/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h similarity index 100% rename from include/asm-sh/bitops-grb.h rename to arch/sh/include/asm/bitops-grb.h diff --git a/include/asm-sh/bitops-irq.h b/arch/sh/include/asm/bitops-irq.h similarity index 100% rename from include/asm-sh/bitops-irq.h rename to arch/sh/include/asm/bitops-irq.h diff --git a/include/asm-sh/bitops.h b/arch/sh/include/asm/bitops.h similarity index 100% rename from include/asm-sh/bitops.h rename to arch/sh/include/asm/bitops.h diff --git a/include/asm-sh/bug.h b/arch/sh/include/asm/bug.h similarity index 100% rename from include/asm-sh/bug.h rename to arch/sh/include/asm/bug.h diff --git a/include/asm-sh/bugs.h b/arch/sh/include/asm/bugs.h similarity index 100% rename from include/asm-sh/bugs.h rename to arch/sh/include/asm/bugs.h diff --git a/include/asm-sh/byteorder.h b/arch/sh/include/asm/byteorder.h similarity index 100% rename from include/asm-sh/byteorder.h rename to arch/sh/include/asm/byteorder.h diff --git a/include/asm-sh/cache.h b/arch/sh/include/asm/cache.h similarity index 97% rename from include/asm-sh/cache.h rename to arch/sh/include/asm/cache.h index 083419f47c6..02df18ea960 100644 --- a/include/asm-sh/cache.h +++ b/arch/sh/include/asm/cache.h @@ -10,7 +10,7 @@ #ifdef __KERNEL__ #include -#include +#include #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) diff --git a/include/asm-sh/cacheflush.h b/arch/sh/include/asm/cacheflush.h similarity index 98% rename from include/asm-sh/cacheflush.h rename to arch/sh/include/asm/cacheflush.h index e034c360411..09acbc32d6c 100644 --- a/include/asm-sh/cacheflush.h +++ b/arch/sh/include/asm/cacheflush.h @@ -27,7 +27,7 @@ #define __flush_purge_region(start, size) do { (void)(start); } while (0) #define __flush_invalidate_region(start, size) do { (void)(start); } while (0) #else -#include +#include /* * Consistent DMA requires that the __flush_xxx() primitives must be set diff --git a/include/asm-sh/checksum.h b/arch/sh/include/asm/checksum.h similarity index 100% rename from include/asm-sh/checksum.h rename to arch/sh/include/asm/checksum.h diff --git a/include/asm-sh/checksum_32.h b/arch/sh/include/asm/checksum_32.h similarity index 100% rename from include/asm-sh/checksum_32.h rename to arch/sh/include/asm/checksum_32.h diff --git a/include/asm-sh/checksum_64.h b/arch/sh/include/asm/checksum_64.h similarity index 100% rename from include/asm-sh/checksum_64.h rename to arch/sh/include/asm/checksum_64.h diff --git a/include/asm-sh/clock.h b/arch/sh/include/asm/clock.h similarity index 100% rename from include/asm-sh/clock.h rename to arch/sh/include/asm/clock.h diff --git a/include/asm-sh/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h similarity index 100% rename from include/asm-sh/cmpxchg-grb.h rename to arch/sh/include/asm/cmpxchg-grb.h diff --git a/include/asm-sh/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h similarity index 100% rename from include/asm-sh/cmpxchg-irq.h rename to arch/sh/include/asm/cmpxchg-irq.h diff --git a/include/asm-sh/cpu-features.h b/arch/sh/include/asm/cpu-features.h similarity index 100% rename from include/asm-sh/cpu-features.h rename to arch/sh/include/asm/cpu-features.h diff --git a/include/asm-sh/cputime.h b/arch/sh/include/asm/cputime.h similarity index 100% rename from include/asm-sh/cputime.h rename to arch/sh/include/asm/cputime.h diff --git a/include/asm-sh/current.h b/arch/sh/include/asm/current.h similarity index 100% rename from include/asm-sh/current.h rename to arch/sh/include/asm/current.h diff --git a/include/asm-sh/delay.h b/arch/sh/include/asm/delay.h similarity index 100% rename from include/asm-sh/delay.h rename to arch/sh/include/asm/delay.h diff --git a/include/asm-sh/device.h b/arch/sh/include/asm/device.h similarity index 100% rename from include/asm-sh/device.h rename to arch/sh/include/asm/device.h diff --git a/include/asm-sh/div64.h b/arch/sh/include/asm/div64.h similarity index 100% rename from include/asm-sh/div64.h rename to arch/sh/include/asm/div64.h diff --git a/include/asm-sh/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h similarity index 100% rename from include/asm-sh/dma-mapping.h rename to arch/sh/include/asm/dma-mapping.h diff --git a/include/asm-sh/dma.h b/arch/sh/include/asm/dma.h similarity index 99% rename from include/asm-sh/dma.h rename to arch/sh/include/asm/dma.h index a65b02fd186..beca7128e2a 100644 --- a/include/asm-sh/dma.h +++ b/arch/sh/include/asm/dma.h @@ -15,7 +15,7 @@ #include #include #include -#include +#include /* The maximum address that we can perform a DMA transfer to on this platform */ /* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any diff --git a/include/asm-sh/dmabrg.h b/arch/sh/include/asm/dmabrg.h similarity index 100% rename from include/asm-sh/dmabrg.h rename to arch/sh/include/asm/dmabrg.h diff --git a/include/asm-sh/edosk7705.h b/arch/sh/include/asm/edosk7705.h similarity index 100% rename from include/asm-sh/edosk7705.h rename to arch/sh/include/asm/edosk7705.h diff --git a/include/asm-sh/elf.h b/arch/sh/include/asm/elf.h similarity index 100% rename from include/asm-sh/elf.h rename to arch/sh/include/asm/elf.h diff --git a/include/asm-sh/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h similarity index 100% rename from include/asm-sh/emergency-restart.h rename to arch/sh/include/asm/emergency-restart.h diff --git a/include/asm-sh/entry-macros.S b/arch/sh/include/asm/entry-macros.S similarity index 100% rename from include/asm-sh/entry-macros.S rename to arch/sh/include/asm/entry-macros.S diff --git a/include/asm-sh/errno.h b/arch/sh/include/asm/errno.h similarity index 100% rename from include/asm-sh/errno.h rename to arch/sh/include/asm/errno.h diff --git a/include/asm-sh/fb.h b/arch/sh/include/asm/fb.h similarity index 100% rename from include/asm-sh/fb.h rename to arch/sh/include/asm/fb.h diff --git a/include/asm-sh/fcntl.h b/arch/sh/include/asm/fcntl.h similarity index 100% rename from include/asm-sh/fcntl.h rename to arch/sh/include/asm/fcntl.h diff --git a/include/asm-sh/fixmap.h b/arch/sh/include/asm/fixmap.h similarity index 100% rename from include/asm-sh/fixmap.h rename to arch/sh/include/asm/fixmap.h diff --git a/include/asm-sh/flat.h b/arch/sh/include/asm/flat.h similarity index 100% rename from include/asm-sh/flat.h rename to arch/sh/include/asm/flat.h diff --git a/include/asm-sh/fpu.h b/arch/sh/include/asm/fpu.h similarity index 100% rename from include/asm-sh/fpu.h rename to arch/sh/include/asm/fpu.h diff --git a/include/asm-sh/freq.h b/arch/sh/include/asm/freq.h similarity index 94% rename from include/asm-sh/freq.h rename to arch/sh/include/asm/freq.h index 39c0e091cf5..4ece90b09b9 100644 --- a/include/asm-sh/freq.h +++ b/arch/sh/include/asm/freq.h @@ -12,7 +12,7 @@ #define __ASM_SH_FREQ_H #ifdef __KERNEL__ -#include +#include #endif /* __KERNEL__ */ #endif /* __ASM_SH_FREQ_H */ diff --git a/include/asm-sh/futex-irq.h b/arch/sh/include/asm/futex-irq.h similarity index 100% rename from include/asm-sh/futex-irq.h rename to arch/sh/include/asm/futex-irq.h diff --git a/include/asm-sh/futex.h b/arch/sh/include/asm/futex.h similarity index 100% rename from include/asm-sh/futex.h rename to arch/sh/include/asm/futex.h diff --git a/include/asm-sh/gpio.h b/arch/sh/include/asm/gpio.h similarity index 94% rename from include/asm-sh/gpio.h rename to arch/sh/include/asm/gpio.h index 9bb27e0f11a..cf32bd2df88 100644 --- a/include/asm-sh/gpio.h +++ b/arch/sh/include/asm/gpio.h @@ -13,7 +13,7 @@ #define __ASM_SH_GPIO_H #if defined(CONFIG_CPU_SH3) -#include +#include #endif #endif /* __ASM_SH_GPIO_H */ diff --git a/include/asm-sh/hardirq.h b/arch/sh/include/asm/hardirq.h similarity index 100% rename from include/asm-sh/hardirq.h rename to arch/sh/include/asm/hardirq.h diff --git a/include/asm-sh/hd64461.h b/arch/sh/include/asm/hd64461.h similarity index 100% rename from include/asm-sh/hd64461.h rename to arch/sh/include/asm/hd64461.h diff --git a/include/asm-sh/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h similarity index 100% rename from include/asm-sh/hd64465/gpio.h rename to arch/sh/include/asm/hd64465/gpio.h diff --git a/include/asm-sh/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h similarity index 100% rename from include/asm-sh/hd64465/hd64465.h rename to arch/sh/include/asm/hd64465/hd64465.h diff --git a/include/asm-sh/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h similarity index 100% rename from include/asm-sh/hd64465/io.h rename to arch/sh/include/asm/hd64465/io.h diff --git a/include/asm-sh/heartbeat.h b/arch/sh/include/asm/heartbeat.h similarity index 100% rename from include/asm-sh/heartbeat.h rename to arch/sh/include/asm/heartbeat.h diff --git a/include/asm-sh/hp6xx.h b/arch/sh/include/asm/hp6xx.h similarity index 100% rename from include/asm-sh/hp6xx.h rename to arch/sh/include/asm/hp6xx.h diff --git a/include/asm-sh/hugetlb.h b/arch/sh/include/asm/hugetlb.h similarity index 100% rename from include/asm-sh/hugetlb.h rename to arch/sh/include/asm/hugetlb.h diff --git a/include/asm-sh/hw_irq.h b/arch/sh/include/asm/hw_irq.h similarity index 100% rename from include/asm-sh/hw_irq.h rename to arch/sh/include/asm/hw_irq.h diff --git a/include/asm-sh/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h similarity index 100% rename from include/asm-sh/i2c-sh7760.h rename to arch/sh/include/asm/i2c-sh7760.h diff --git a/include/asm-sh/ilsel.h b/arch/sh/include/asm/ilsel.h similarity index 100% rename from include/asm-sh/ilsel.h rename to arch/sh/include/asm/ilsel.h diff --git a/include/asm-sh/io.h b/arch/sh/include/asm/io.h similarity index 100% rename from include/asm-sh/io.h rename to arch/sh/include/asm/io.h diff --git a/include/asm-sh/io_generic.h b/arch/sh/include/asm/io_generic.h similarity index 100% rename from include/asm-sh/io_generic.h rename to arch/sh/include/asm/io_generic.h diff --git a/include/asm-sh/io_trapped.h b/arch/sh/include/asm/io_trapped.h similarity index 100% rename from include/asm-sh/io_trapped.h rename to arch/sh/include/asm/io_trapped.h diff --git a/include/asm-sh/ioctl.h b/arch/sh/include/asm/ioctl.h similarity index 100% rename from include/asm-sh/ioctl.h rename to arch/sh/include/asm/ioctl.h diff --git a/include/asm-sh/ioctls.h b/arch/sh/include/asm/ioctls.h similarity index 100% rename from include/asm-sh/ioctls.h rename to arch/sh/include/asm/ioctls.h diff --git a/include/asm-sh/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h similarity index 100% rename from include/asm-sh/ipcbuf.h rename to arch/sh/include/asm/ipcbuf.h diff --git a/include/asm-sh/irq.h b/arch/sh/include/asm/irq.h similarity index 97% rename from include/asm-sh/irq.h rename to arch/sh/include/asm/irq.h index ca66e5df69d..6195a531c1b 100644 --- a/include/asm-sh/irq.h +++ b/arch/sh/include/asm/irq.h @@ -51,7 +51,7 @@ extern void irq_ctx_exit(int cpu); #endif #ifdef CONFIG_CPU_SH5 -#include +#include #endif #endif /* __ASM_SH_IRQ_H */ diff --git a/include/asm-sh/irq_regs.h b/arch/sh/include/asm/irq_regs.h similarity index 100% rename from include/asm-sh/irq_regs.h rename to arch/sh/include/asm/irq_regs.h diff --git a/include/asm-sh/irqflags.h b/arch/sh/include/asm/irqflags.h similarity index 100% rename from include/asm-sh/irqflags.h rename to arch/sh/include/asm/irqflags.h diff --git a/include/asm-sh/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h similarity index 100% rename from include/asm-sh/irqflags_32.h rename to arch/sh/include/asm/irqflags_32.h diff --git a/include/asm-sh/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h similarity index 98% rename from include/asm-sh/irqflags_64.h rename to arch/sh/include/asm/irqflags_64.h index 4f6b8a56e7b..88f65222c1d 100644 --- a/include/asm-sh/irqflags_64.h +++ b/arch/sh/include/asm/irqflags_64.h @@ -1,7 +1,7 @@ #ifndef __ASM_SH_IRQFLAGS_64_H #define __ASM_SH_IRQFLAGS_64_H -#include +#include #define SR_MASK_LL 0x00000000000000f0LL #define SR_BL_LL 0x0000000010000000LL diff --git a/include/asm-sh/kdebug.h b/arch/sh/include/asm/kdebug.h similarity index 100% rename from include/asm-sh/kdebug.h rename to arch/sh/include/asm/kdebug.h diff --git a/include/asm-sh/kexec.h b/arch/sh/include/asm/kexec.h similarity index 100% rename from include/asm-sh/kexec.h rename to arch/sh/include/asm/kexec.h diff --git a/include/asm-sh/kgdb.h b/arch/sh/include/asm/kgdb.h similarity index 100% rename from include/asm-sh/kgdb.h rename to arch/sh/include/asm/kgdb.h diff --git a/include/asm-sh/kmap_types.h b/arch/sh/include/asm/kmap_types.h similarity index 100% rename from include/asm-sh/kmap_types.h rename to arch/sh/include/asm/kmap_types.h diff --git a/include/asm-sh/lboxre2.h b/arch/sh/include/asm/lboxre2.h similarity index 100% rename from include/asm-sh/lboxre2.h rename to arch/sh/include/asm/lboxre2.h diff --git a/include/asm-sh/linkage.h b/arch/sh/include/asm/linkage.h similarity index 100% rename from include/asm-sh/linkage.h rename to arch/sh/include/asm/linkage.h diff --git a/include/asm-sh/local.h b/arch/sh/include/asm/local.h similarity index 100% rename from include/asm-sh/local.h rename to arch/sh/include/asm/local.h diff --git a/include/asm-sh/machvec.h b/arch/sh/include/asm/machvec.h similarity index 100% rename from include/asm-sh/machvec.h rename to arch/sh/include/asm/machvec.h diff --git a/include/asm-sh/magicpanelr2.h b/arch/sh/include/asm/magicpanelr2.h similarity index 100% rename from include/asm-sh/magicpanelr2.h rename to arch/sh/include/asm/magicpanelr2.h diff --git a/include/asm-sh/mc146818rtc.h b/arch/sh/include/asm/mc146818rtc.h similarity index 100% rename from include/asm-sh/mc146818rtc.h rename to arch/sh/include/asm/mc146818rtc.h diff --git a/include/asm-sh/microdev.h b/arch/sh/include/asm/microdev.h similarity index 100% rename from include/asm-sh/microdev.h rename to arch/sh/include/asm/microdev.h diff --git a/include/asm-sh/migor.h b/arch/sh/include/asm/migor.h similarity index 100% rename from include/asm-sh/migor.h rename to arch/sh/include/asm/migor.h diff --git a/include/asm-sh/mman.h b/arch/sh/include/asm/mman.h similarity index 100% rename from include/asm-sh/mman.h rename to arch/sh/include/asm/mman.h diff --git a/include/asm-sh/mmu.h b/arch/sh/include/asm/mmu.h similarity index 100% rename from include/asm-sh/mmu.h rename to arch/sh/include/asm/mmu.h diff --git a/include/asm-sh/mmu_context.h b/arch/sh/include/asm/mmu_context.h similarity index 99% rename from include/asm-sh/mmu_context.h rename to arch/sh/include/asm/mmu_context.h index 8589a50febd..04c0c9733ad 100644 --- a/include/asm-sh/mmu_context.h +++ b/arch/sh/include/asm/mmu_context.h @@ -8,7 +8,7 @@ #define __ASM_SH_MMU_CONTEXT_H #ifdef __KERNEL__ -#include +#include #include #include #include diff --git a/include/asm-sh/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h similarity index 100% rename from include/asm-sh/mmu_context_32.h rename to arch/sh/include/asm/mmu_context_32.h diff --git a/include/asm-sh/mmu_context_64.h b/arch/sh/include/asm/mmu_context_64.h similarity index 98% rename from include/asm-sh/mmu_context_64.h rename to arch/sh/include/asm/mmu_context_64.h index 9649f1c07ca..de121025d87 100644 --- a/include/asm-sh/mmu_context_64.h +++ b/arch/sh/include/asm/mmu_context_64.h @@ -11,7 +11,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ -#include +#include #include #define SR_ASID_MASK 0xffffffffff00ffffULL diff --git a/include/asm-sh/mmzone.h b/arch/sh/include/asm/mmzone.h similarity index 100% rename from include/asm-sh/mmzone.h rename to arch/sh/include/asm/mmzone.h diff --git a/include/asm-sh/module.h b/arch/sh/include/asm/module.h similarity index 100% rename from include/asm-sh/module.h rename to arch/sh/include/asm/module.h diff --git a/include/asm-sh/msgbuf.h b/arch/sh/include/asm/msgbuf.h similarity index 100% rename from include/asm-sh/msgbuf.h rename to arch/sh/include/asm/msgbuf.h diff --git a/include/asm-sh/mutex.h b/arch/sh/include/asm/mutex.h similarity index 100% rename from include/asm-sh/mutex.h rename to arch/sh/include/asm/mutex.h diff --git a/include/asm-sh/page.h b/arch/sh/include/asm/page.h similarity index 100% rename from include/asm-sh/page.h rename to arch/sh/include/asm/page.h diff --git a/include/asm-sh/param.h b/arch/sh/include/asm/param.h similarity index 100% rename from include/asm-sh/param.h rename to arch/sh/include/asm/param.h diff --git a/include/asm-sh/parport.h b/arch/sh/include/asm/parport.h similarity index 100% rename from include/asm-sh/parport.h rename to arch/sh/include/asm/parport.h diff --git a/include/asm-sh/pci.h b/arch/sh/include/asm/pci.h similarity index 100% rename from include/asm-sh/pci.h rename to arch/sh/include/asm/pci.h diff --git a/include/asm-sh/percpu.h b/arch/sh/include/asm/percpu.h similarity index 100% rename from include/asm-sh/percpu.h rename to arch/sh/include/asm/percpu.h diff --git a/include/asm-sh/pgalloc.h b/arch/sh/include/asm/pgalloc.h similarity index 100% rename from include/asm-sh/pgalloc.h rename to arch/sh/include/asm/pgalloc.h diff --git a/include/asm-sh/pgtable.h b/arch/sh/include/asm/pgtable.h similarity index 100% rename from include/asm-sh/pgtable.h rename to arch/sh/include/asm/pgtable.h diff --git a/include/asm-sh/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h similarity index 100% rename from include/asm-sh/pgtable_32.h rename to arch/sh/include/asm/pgtable_32.h diff --git a/include/asm-sh/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h similarity index 100% rename from include/asm-sh/pgtable_64.h rename to arch/sh/include/asm/pgtable_64.h diff --git a/include/asm-sh/pm.h b/arch/sh/include/asm/pm.h similarity index 100% rename from include/asm-sh/pm.h rename to arch/sh/include/asm/pm.h diff --git a/include/asm-sh/poll.h b/arch/sh/include/asm/poll.h similarity index 100% rename from include/asm-sh/poll.h rename to arch/sh/include/asm/poll.h diff --git a/include/asm-sh/posix_types.h b/arch/sh/include/asm/posix_types.h similarity index 100% rename from include/asm-sh/posix_types.h rename to arch/sh/include/asm/posix_types.h diff --git a/include/asm-sh/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h similarity index 100% rename from include/asm-sh/posix_types_32.h rename to arch/sh/include/asm/posix_types_32.h diff --git a/include/asm-sh/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h similarity index 100% rename from include/asm-sh/posix_types_64.h rename to arch/sh/include/asm/posix_types_64.h diff --git a/include/asm-sh/processor.h b/arch/sh/include/asm/processor.h similarity index 100% rename from include/asm-sh/processor.h rename to arch/sh/include/asm/processor.h diff --git a/include/asm-sh/processor_32.h b/arch/sh/include/asm/processor_32.h similarity index 100% rename from include/asm-sh/processor_32.h rename to arch/sh/include/asm/processor_32.h diff --git a/include/asm-sh/processor_64.h b/arch/sh/include/asm/processor_64.h similarity index 99% rename from include/asm-sh/processor_64.h rename to arch/sh/include/asm/processor_64.h index fc7fc685ba2..770d5169983 100644 --- a/include/asm-sh/processor_64.h +++ b/arch/sh/include/asm/processor_64.h @@ -19,7 +19,7 @@ #include #include #include -#include +#include /* * Default implementation of macro that returns current diff --git a/include/asm-sh/ptrace.h b/arch/sh/include/asm/ptrace.h similarity index 100% rename from include/asm-sh/ptrace.h rename to arch/sh/include/asm/ptrace.h diff --git a/include/asm-sh/push-switch.h b/arch/sh/include/asm/push-switch.h similarity index 100% rename from include/asm-sh/push-switch.h rename to arch/sh/include/asm/push-switch.h diff --git a/include/asm-sh/r7780rp.h b/arch/sh/include/asm/r7780rp.h similarity index 100% rename from include/asm-sh/r7780rp.h rename to arch/sh/include/asm/r7780rp.h diff --git a/include/asm-sh/resource.h b/arch/sh/include/asm/resource.h similarity index 100% rename from include/asm-sh/resource.h rename to arch/sh/include/asm/resource.h diff --git a/include/asm-sh/rtc.h b/arch/sh/include/asm/rtc.h similarity index 92% rename from include/asm-sh/rtc.h rename to arch/sh/include/asm/rtc.h index ec45ba8e11d..1813f4202a2 100644 --- a/include/asm-sh/rtc.h +++ b/arch/sh/include/asm/rtc.h @@ -11,6 +11,6 @@ struct sh_rtc_platform_info { unsigned long capabilities; }; -#include +#include #endif /* _ASM_RTC_H */ diff --git a/include/asm-sh/rts7751r2d.h b/arch/sh/include/asm/rts7751r2d.h similarity index 100% rename from include/asm-sh/rts7751r2d.h rename to arch/sh/include/asm/rts7751r2d.h diff --git a/include/asm-sh/rwsem.h b/arch/sh/include/asm/rwsem.h similarity index 100% rename from include/asm-sh/rwsem.h rename to arch/sh/include/asm/rwsem.h diff --git a/include/asm-sh/scatterlist.h b/arch/sh/include/asm/scatterlist.h similarity index 100% rename from include/asm-sh/scatterlist.h rename to arch/sh/include/asm/scatterlist.h diff --git a/include/asm-sh/sdk7780.h b/arch/sh/include/asm/sdk7780.h similarity index 100% rename from include/asm-sh/sdk7780.h rename to arch/sh/include/asm/sdk7780.h diff --git a/include/asm-sh/se.h b/arch/sh/include/asm/se.h similarity index 100% rename from include/asm-sh/se.h rename to arch/sh/include/asm/se.h diff --git a/include/asm-sh/se7206.h b/arch/sh/include/asm/se7206.h similarity index 100% rename from include/asm-sh/se7206.h rename to arch/sh/include/asm/se7206.h diff --git a/include/asm-sh/se7343.h b/arch/sh/include/asm/se7343.h similarity index 100% rename from include/asm-sh/se7343.h rename to arch/sh/include/asm/se7343.h diff --git a/include/asm-sh/se7721.h b/arch/sh/include/asm/se7721.h similarity index 100% rename from include/asm-sh/se7721.h rename to arch/sh/include/asm/se7721.h diff --git a/include/asm-sh/se7722.h b/arch/sh/include/asm/se7722.h similarity index 100% rename from include/asm-sh/se7722.h rename to arch/sh/include/asm/se7722.h diff --git a/include/asm-sh/se7751.h b/arch/sh/include/asm/se7751.h similarity index 100% rename from include/asm-sh/se7751.h rename to arch/sh/include/asm/se7751.h diff --git a/include/asm-sh/se7780.h b/arch/sh/include/asm/se7780.h similarity index 100% rename from include/asm-sh/se7780.h rename to arch/sh/include/asm/se7780.h diff --git a/include/asm-sh/sections.h b/arch/sh/include/asm/sections.h similarity index 100% rename from include/asm-sh/sections.h rename to arch/sh/include/asm/sections.h diff --git a/include/asm-sh/segment.h b/arch/sh/include/asm/segment.h similarity index 100% rename from include/asm-sh/segment.h rename to arch/sh/include/asm/segment.h diff --git a/include/asm-sh/sembuf.h b/arch/sh/include/asm/sembuf.h similarity index 100% rename from include/asm-sh/sembuf.h rename to arch/sh/include/asm/sembuf.h diff --git a/include/asm-sh/serial.h b/arch/sh/include/asm/serial.h similarity index 96% rename from include/asm-sh/serial.h rename to arch/sh/include/asm/serial.h index 21f6d330f18..e13cc948ee6 100644 --- a/include/asm-sh/serial.h +++ b/arch/sh/include/asm/serial.h @@ -21,7 +21,7 @@ #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) #ifdef CONFIG_HD64465 -#include +#include #define SERIAL_PORT_DFNS \ /* UART CLK PORT IRQ FLAGS */ \ diff --git a/include/asm-sh/setup.h b/arch/sh/include/asm/setup.h similarity index 100% rename from include/asm-sh/setup.h rename to arch/sh/include/asm/setup.h diff --git a/include/asm-sh/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h similarity index 100% rename from include/asm-sh/sfp-machine.h rename to arch/sh/include/asm/sfp-machine.h diff --git a/include/asm-sh/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h similarity index 100% rename from include/asm-sh/sh7760fb.h rename to arch/sh/include/asm/sh7760fb.h diff --git a/include/asm-sh/sh7763rdp.h b/arch/sh/include/asm/sh7763rdp.h similarity index 100% rename from include/asm-sh/sh7763rdp.h rename to arch/sh/include/asm/sh7763rdp.h diff --git a/include/asm-sh/sh7785lcr.h b/arch/sh/include/asm/sh7785lcr.h similarity index 100% rename from include/asm-sh/sh7785lcr.h rename to arch/sh/include/asm/sh7785lcr.h diff --git a/include/asm-sh/sh_bios.h b/arch/sh/include/asm/sh_bios.h similarity index 100% rename from include/asm-sh/sh_bios.h rename to arch/sh/include/asm/sh_bios.h diff --git a/include/asm-sh/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h similarity index 100% rename from include/asm-sh/sh_keysc.h rename to arch/sh/include/asm/sh_keysc.h diff --git a/include/asm-sh/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h similarity index 100% rename from include/asm-sh/sh_mobile_lcdc.h rename to arch/sh/include/asm/sh_mobile_lcdc.h diff --git a/include/asm-sh/shmbuf.h b/arch/sh/include/asm/shmbuf.h similarity index 100% rename from include/asm-sh/shmbuf.h rename to arch/sh/include/asm/shmbuf.h diff --git a/include/asm-sh/shmin.h b/arch/sh/include/asm/shmin.h similarity index 100% rename from include/asm-sh/shmin.h rename to arch/sh/include/asm/shmin.h diff --git a/include/asm-sh/shmparam.h b/arch/sh/include/asm/shmparam.h similarity index 100% rename from include/asm-sh/shmparam.h rename to arch/sh/include/asm/shmparam.h diff --git a/include/asm-sh/sigcontext.h b/arch/sh/include/asm/sigcontext.h similarity index 100% rename from include/asm-sh/sigcontext.h rename to arch/sh/include/asm/sigcontext.h diff --git a/include/asm-sh/siginfo.h b/arch/sh/include/asm/siginfo.h similarity index 100% rename from include/asm-sh/siginfo.h rename to arch/sh/include/asm/siginfo.h diff --git a/include/asm-sh/signal.h b/arch/sh/include/asm/signal.h similarity index 100% rename from include/asm-sh/signal.h rename to arch/sh/include/asm/signal.h diff --git a/include/asm-sh/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h similarity index 100% rename from include/asm-sh/smc37c93x.h rename to arch/sh/include/asm/smc37c93x.h diff --git a/include/asm-sh/smp.h b/arch/sh/include/asm/smp.h similarity index 100% rename from include/asm-sh/smp.h rename to arch/sh/include/asm/smp.h diff --git a/include/asm-sh/snapgear.h b/arch/sh/include/asm/snapgear.h similarity index 100% rename from include/asm-sh/snapgear.h rename to arch/sh/include/asm/snapgear.h diff --git a/include/asm-sh/socket.h b/arch/sh/include/asm/socket.h similarity index 100% rename from include/asm-sh/socket.h rename to arch/sh/include/asm/socket.h diff --git a/include/asm-sh/sockios.h b/arch/sh/include/asm/sockios.h similarity index 100% rename from include/asm-sh/sockios.h rename to arch/sh/include/asm/sockios.h diff --git a/include/asm-sh/sparsemem.h b/arch/sh/include/asm/sparsemem.h similarity index 100% rename from include/asm-sh/sparsemem.h rename to arch/sh/include/asm/sparsemem.h diff --git a/include/asm-sh/spi.h b/arch/sh/include/asm/spi.h similarity index 100% rename from include/asm-sh/spi.h rename to arch/sh/include/asm/spi.h diff --git a/include/asm-sh/spinlock.h b/arch/sh/include/asm/spinlock.h similarity index 100% rename from include/asm-sh/spinlock.h rename to arch/sh/include/asm/spinlock.h diff --git a/include/asm-sh/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h similarity index 100% rename from include/asm-sh/spinlock_types.h rename to arch/sh/include/asm/spinlock_types.h diff --git a/include/asm-sh/stat.h b/arch/sh/include/asm/stat.h similarity index 100% rename from include/asm-sh/stat.h rename to arch/sh/include/asm/stat.h diff --git a/include/asm-sh/statfs.h b/arch/sh/include/asm/statfs.h similarity index 100% rename from include/asm-sh/statfs.h rename to arch/sh/include/asm/statfs.h diff --git a/include/asm-sh/string.h b/arch/sh/include/asm/string.h similarity index 100% rename from include/asm-sh/string.h rename to arch/sh/include/asm/string.h diff --git a/include/asm-sh/string_32.h b/arch/sh/include/asm/string_32.h similarity index 100% rename from include/asm-sh/string_32.h rename to arch/sh/include/asm/string_32.h diff --git a/include/asm-sh/string_64.h b/arch/sh/include/asm/string_64.h similarity index 100% rename from include/asm-sh/string_64.h rename to arch/sh/include/asm/string_64.h diff --git a/include/asm-sh/system.h b/arch/sh/include/asm/system.h similarity index 100% rename from include/asm-sh/system.h rename to arch/sh/include/asm/system.h diff --git a/include/asm-sh/system_32.h b/arch/sh/include/asm/system_32.h similarity index 100% rename from include/asm-sh/system_32.h rename to arch/sh/include/asm/system_32.h diff --git a/include/asm-sh/system_64.h b/arch/sh/include/asm/system_64.h similarity index 100% rename from include/asm-sh/system_64.h rename to arch/sh/include/asm/system_64.h diff --git a/include/asm-sh/systemh7751.h b/arch/sh/include/asm/systemh7751.h similarity index 100% rename from include/asm-sh/systemh7751.h rename to arch/sh/include/asm/systemh7751.h diff --git a/include/asm-sh/termbits.h b/arch/sh/include/asm/termbits.h similarity index 100% rename from include/asm-sh/termbits.h rename to arch/sh/include/asm/termbits.h diff --git a/include/asm-sh/termios.h b/arch/sh/include/asm/termios.h similarity index 100% rename from include/asm-sh/termios.h rename to arch/sh/include/asm/termios.h diff --git a/include/asm-sh/thread_info.h b/arch/sh/include/asm/thread_info.h similarity index 100% rename from include/asm-sh/thread_info.h rename to arch/sh/include/asm/thread_info.h diff --git a/include/asm-sh/timer.h b/arch/sh/include/asm/timer.h similarity index 96% rename from include/asm-sh/timer.h rename to arch/sh/include/asm/timer.h index 327f7eb8976..a7ca3a195bb 100644 --- a/include/asm-sh/timer.h +++ b/arch/sh/include/asm/timer.h @@ -3,7 +3,7 @@ #include #include -#include +#include struct sys_timer_ops { int (*init)(void); diff --git a/include/asm-sh/timex.h b/arch/sh/include/asm/timex.h similarity index 100% rename from include/asm-sh/timex.h rename to arch/sh/include/asm/timex.h diff --git a/include/asm-sh/titan.h b/arch/sh/include/asm/titan.h similarity index 100% rename from include/asm-sh/titan.h rename to arch/sh/include/asm/titan.h diff --git a/include/asm-sh/tlb.h b/arch/sh/include/asm/tlb.h similarity index 100% rename from include/asm-sh/tlb.h rename to arch/sh/include/asm/tlb.h diff --git a/include/asm-sh/tlb_64.h b/arch/sh/include/asm/tlb_64.h similarity index 100% rename from include/asm-sh/tlb_64.h rename to arch/sh/include/asm/tlb_64.h diff --git a/include/asm-sh/tlbflush.h b/arch/sh/include/asm/tlbflush.h similarity index 100% rename from include/asm-sh/tlbflush.h rename to arch/sh/include/asm/tlbflush.h diff --git a/include/asm-sh/topology.h b/arch/sh/include/asm/topology.h similarity index 100% rename from include/asm-sh/topology.h rename to arch/sh/include/asm/topology.h diff --git a/include/asm-sh/types.h b/arch/sh/include/asm/types.h similarity index 100% rename from include/asm-sh/types.h rename to arch/sh/include/asm/types.h diff --git a/include/asm-sh/uaccess.h b/arch/sh/include/asm/uaccess.h similarity index 100% rename from include/asm-sh/uaccess.h rename to arch/sh/include/asm/uaccess.h diff --git a/include/asm-sh/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h similarity index 100% rename from include/asm-sh/uaccess_32.h rename to arch/sh/include/asm/uaccess_32.h diff --git a/include/asm-sh/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h similarity index 100% rename from include/asm-sh/uaccess_64.h rename to arch/sh/include/asm/uaccess_64.h diff --git a/include/asm-sh/ubc.h b/arch/sh/include/asm/ubc.h similarity index 98% rename from include/asm-sh/ubc.h rename to arch/sh/include/asm/ubc.h index 56f4e30dc49..a7b9028bbfb 100644 --- a/include/asm-sh/ubc.h +++ b/arch/sh/include/asm/ubc.h @@ -12,7 +12,7 @@ #define __ASM_SH_UBC_H #ifdef __KERNEL__ -#include +#include /* User Break Controller */ #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) diff --git a/include/asm-sh/ucontext.h b/arch/sh/include/asm/ucontext.h similarity index 100% rename from include/asm-sh/ucontext.h rename to arch/sh/include/asm/ucontext.h diff --git a/include/asm-sh/unaligned.h b/arch/sh/include/asm/unaligned.h similarity index 100% rename from include/asm-sh/unaligned.h rename to arch/sh/include/asm/unaligned.h diff --git a/include/asm-sh/unistd.h b/arch/sh/include/asm/unistd.h similarity index 100% rename from include/asm-sh/unistd.h rename to arch/sh/include/asm/unistd.h diff --git a/include/asm-sh/unistd_32.h b/arch/sh/include/asm/unistd_32.h similarity index 100% rename from include/asm-sh/unistd_32.h rename to arch/sh/include/asm/unistd_32.h diff --git a/include/asm-sh/unistd_64.h b/arch/sh/include/asm/unistd_64.h similarity index 100% rename from include/asm-sh/unistd_64.h rename to arch/sh/include/asm/unistd_64.h diff --git a/include/asm-sh/user.h b/arch/sh/include/asm/user.h similarity index 100% rename from include/asm-sh/user.h rename to arch/sh/include/asm/user.h diff --git a/include/asm-sh/vga.h b/arch/sh/include/asm/vga.h similarity index 100% rename from include/asm-sh/vga.h rename to arch/sh/include/asm/vga.h diff --git a/include/asm-sh/watchdog.h b/arch/sh/include/asm/watchdog.h similarity index 96% rename from include/asm-sh/watchdog.h rename to arch/sh/include/asm/watchdog.h index d19ea62ef8c..f024fed00a7 100644 --- a/include/asm-sh/watchdog.h +++ b/arch/sh/include/asm/watchdog.h @@ -13,11 +13,11 @@ #ifdef __KERNEL__ #include -#include +#include #include /* - * See asm/cpu-sh2/watchdog.h for explanation of this stupidity.. + * See cpu-sh2/watchdog.h for explanation of this stupidity.. */ #ifndef WTCNT_R # define WTCNT_R WTCNT diff --git a/include/asm-sh/xor.h b/arch/sh/include/asm/xor.h similarity index 100% rename from include/asm-sh/xor.h rename to arch/sh/include/asm/xor.h diff --git a/include/asm-sh/cpu-sh2/addrspace.h b/arch/sh/include/cpu-sh2/cpu/addrspace.h similarity index 100% rename from include/asm-sh/cpu-sh2/addrspace.h rename to arch/sh/include/cpu-sh2/cpu/addrspace.h diff --git a/include/asm-sh/cpu-sh2/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h similarity index 100% rename from include/asm-sh/cpu-sh2/cache.h rename to arch/sh/include/cpu-sh2/cpu/cache.h diff --git a/include/asm-sh/cpu-sh2/cacheflush.h b/arch/sh/include/cpu-sh2/cpu/cacheflush.h similarity index 100% rename from include/asm-sh/cpu-sh2/cacheflush.h rename to arch/sh/include/cpu-sh2/cpu/cacheflush.h diff --git a/include/asm-sh/cpu-sh2/dma.h b/arch/sh/include/cpu-sh2/cpu/dma.h similarity index 100% rename from include/asm-sh/cpu-sh2/dma.h rename to arch/sh/include/cpu-sh2/cpu/dma.h diff --git a/include/asm-sh/cpu-sh2/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h similarity index 100% rename from include/asm-sh/cpu-sh2/freq.h rename to arch/sh/include/cpu-sh2/cpu/freq.h diff --git a/include/asm-sh/cpu-sh2/mmu_context.h b/arch/sh/include/cpu-sh2/cpu/mmu_context.h similarity index 100% rename from include/asm-sh/cpu-sh2/mmu_context.h rename to arch/sh/include/cpu-sh2/cpu/mmu_context.h diff --git a/include/asm-sh/cpu-sh2/rtc.h b/arch/sh/include/cpu-sh2/cpu/rtc.h similarity index 100% rename from include/asm-sh/cpu-sh2/rtc.h rename to arch/sh/include/cpu-sh2/cpu/rtc.h diff --git a/include/asm-sh/cpu-sh2/sigcontext.h b/arch/sh/include/cpu-sh2/cpu/sigcontext.h similarity index 100% rename from include/asm-sh/cpu-sh2/sigcontext.h rename to arch/sh/include/cpu-sh2/cpu/sigcontext.h diff --git a/include/asm-sh/cpu-sh2/timer.h b/arch/sh/include/cpu-sh2/cpu/timer.h similarity index 100% rename from include/asm-sh/cpu-sh2/timer.h rename to arch/sh/include/cpu-sh2/cpu/timer.h diff --git a/include/asm-sh/cpu-sh2/ubc.h b/arch/sh/include/cpu-sh2/cpu/ubc.h similarity index 100% rename from include/asm-sh/cpu-sh2/ubc.h rename to arch/sh/include/cpu-sh2/cpu/ubc.h diff --git a/include/asm-sh/cpu-sh2/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h similarity index 100% rename from include/asm-sh/cpu-sh2/watchdog.h rename to arch/sh/include/cpu-sh2/cpu/watchdog.h diff --git a/include/asm-sh/cpu-sh2a/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h similarity index 100% rename from include/asm-sh/cpu-sh2a/addrspace.h rename to arch/sh/include/cpu-sh2a/cpu/addrspace.h diff --git a/include/asm-sh/cpu-sh2a/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h similarity index 100% rename from include/asm-sh/cpu-sh2a/cache.h rename to arch/sh/include/cpu-sh2a/cpu/cache.h diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h new file mode 100644 index 00000000000..2979efb26de --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/cpu-sh2/cacheflush.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_CACHEFLUSH_H +#define __ASM_CPU_SH2_CACHEFLUSH_H + +/* + * Cache flushing: + * + * - flush_cache_all() flushes entire cache + * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking + * - flush_cache_page(mm, vmaddr, pfn) flushes a single page + * - flush_cache_range(vma, start, end) flushes a range of pages + * + * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache + * - flush_icache_range(start, end) flushes(invalidates) a range for icache + * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache + * + * Caches are indexed (effectively) by physical address on SH-2, so + * we don't need them. + */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_sigtramp(vaddr) do { } while (0) + +#define p3_cache_init() do { } while (0) +#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/dma.h b/arch/sh/include/cpu-sh2a/cpu/dma.h new file mode 100644 index 00000000000..d66b43cdc63 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/dma.h @@ -0,0 +1,23 @@ +/* + * Definitions for the SH-2 DMAC. + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_DMA_H +#define __ASM_CPU_SH2_DMA_H + +#define SH_MAX_DMA_CHANNELS 2 + +#define SAR ((unsigned long[]){ 0xffffff80, 0xffffff90 }) +#define DAR ((unsigned long[]){ 0xffffff84, 0xffffff94 }) +#define DMATCR ((unsigned long[]){ 0xffffff88, 0xffffff98 }) +#define CHCR ((unsigned long[]){ 0xfffffffc, 0xffffff9c }) + +#define DMAOR 0xffffffb0 + +#endif /* __ASM_CPU_SH2_DMA_H */ + diff --git a/include/asm-sh/cpu-sh2a/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h similarity index 100% rename from include/asm-sh/cpu-sh2a/freq.h rename to arch/sh/include/cpu-sh2a/cpu/freq.h diff --git a/arch/sh/include/cpu-sh2a/cpu/mmu_context.h b/arch/sh/include/cpu-sh2a/cpu/mmu_context.h new file mode 100644 index 00000000000..beeb299e01e --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/mmu_context.h @@ -0,0 +1,16 @@ +/* + * include/asm-sh/cpu-sh2/mmu_context.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H +#define __ASM_CPU_SH2_MMU_CONTEXT_H + +/* No MMU */ + +#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */ + diff --git a/include/asm-sh/cpu-sh2a/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h similarity index 100% rename from include/asm-sh/cpu-sh2a/rtc.h rename to arch/sh/include/cpu-sh2a/cpu/rtc.h diff --git a/arch/sh/include/cpu-sh2a/cpu/timer.h b/arch/sh/include/cpu-sh2a/cpu/timer.h new file mode 100644 index 00000000000..a39c241e819 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/timer.h @@ -0,0 +1,6 @@ +#ifndef __ASM_CPU_SH2_TIMER_H +#define __ASM_CPU_SH2_TIMER_H + +/* Nothing needed yet */ + +#endif /* __ASM_CPU_SH2_TIMER_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h new file mode 100644 index 00000000000..ba0e87f19c7 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h @@ -0,0 +1,32 @@ +/* + * include/asm-sh/cpu-sh2/ubc.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_UBC_H +#define __ASM_CPU_SH2_UBC_H + +#define UBC_BARA 0xffffff40 +#define UBC_BAMRA 0xffffff44 +#define UBC_BBRA 0xffffff48 +#define UBC_BARB 0xffffff60 +#define UBC_BAMRB 0xffffff64 +#define UBC_BBRB 0xffffff68 +#define UBC_BDRB 0xffffff70 +#define UBC_BDMRB 0xffffff74 +#define UBC_BRCR 0xffffff78 + +/* + * We don't have any ASID changes to make in the UBC on the SH-2. + * + * Make these purposely invalid to track misuse. + */ +#define UBC_BASRA 0x00000000 +#define UBC_BASRB 0x00000000 + +#endif /* __ASM_CPU_SH2_UBC_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h new file mode 100644 index 00000000000..393161c9c6d --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/watchdog.h @@ -0,0 +1,69 @@ +/* + * include/asm-sh/cpu-sh2/watchdog.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_WATCHDOG_H +#define __ASM_CPU_SH2_WATCHDOG_H + +/* + * More SH-2 brilliance .. its not good enough that we can't read + * and write the same sizes to WTCNT, now we have to read and write + * with different sizes at different addresses for WTCNT _and_ RSTCSR. + * + * At least on the bright side no one has managed to screw over WTCSR + * in this fashion .. yet. + */ +/* Register definitions */ +#define WTCNT 0xfffffe80 +#define WTCSR 0xfffffe80 +#define RSTCSR 0xfffffe82 + +#define WTCNT_R (WTCNT + 1) +#define RSTCSR_R (RSTCSR + 1) + +/* Bit definitions */ +#define WTCSR_IOVF 0x80 +#define WTCSR_WT 0x40 +#define WTCSR_TME 0x20 +#define WTCSR_RSTS 0x00 + +#define RSTCSR_RSTS 0x20 + +/** + * sh_wdt_read_rstcsr - Read from Reset Control/Status Register + * + * Reads back the RSTCSR value. + */ +static inline __u8 sh_wdt_read_rstcsr(void) +{ + /* + * Same read/write brain-damage as for WTCNT here.. + */ + return ctrl_inb(RSTCSR_R); +} + +/** + * sh_wdt_write_csr - Write to Reset Control/Status Register + * + * @val: Value to write + * + * Writes the given value @val to the lower byte of the control/status + * register. The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_rstcsr(__u8 val) +{ + /* + * Note: Due to the brain-damaged nature of this register, + * we can't presently touch the WOVF bit, since the upper byte + * has to be swapped for this. So just leave it alone.. + */ + ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR); +} + +#endif /* __ASM_CPU_SH2_WATCHDOG_H */ + diff --git a/include/asm-sh/cpu-sh3/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h similarity index 100% rename from include/asm-sh/cpu-sh3/adc.h rename to arch/sh/include/cpu-sh3/cpu/adc.h diff --git a/include/asm-sh/cpu-sh3/addrspace.h b/arch/sh/include/cpu-sh3/cpu/addrspace.h similarity index 100% rename from include/asm-sh/cpu-sh3/addrspace.h rename to arch/sh/include/cpu-sh3/cpu/addrspace.h diff --git a/include/asm-sh/cpu-sh3/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h similarity index 100% rename from include/asm-sh/cpu-sh3/cache.h rename to arch/sh/include/cpu-sh3/cpu/cache.h diff --git a/include/asm-sh/cpu-sh3/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h similarity index 100% rename from include/asm-sh/cpu-sh3/cacheflush.h rename to arch/sh/include/cpu-sh3/cpu/cacheflush.h diff --git a/include/asm-sh/cpu-sh3/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h similarity index 100% rename from include/asm-sh/cpu-sh3/dac.h rename to arch/sh/include/cpu-sh3/cpu/dac.h diff --git a/include/asm-sh/cpu-sh3/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h similarity index 100% rename from include/asm-sh/cpu-sh3/dma.h rename to arch/sh/include/cpu-sh3/cpu/dma.h diff --git a/include/asm-sh/cpu-sh3/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h similarity index 100% rename from include/asm-sh/cpu-sh3/freq.h rename to arch/sh/include/cpu-sh3/cpu/freq.h diff --git a/include/asm-sh/cpu-sh3/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h similarity index 100% rename from include/asm-sh/cpu-sh3/gpio.h rename to arch/sh/include/cpu-sh3/cpu/gpio.h diff --git a/include/asm-sh/cpu-sh3/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h similarity index 100% rename from include/asm-sh/cpu-sh3/mmu_context.h rename to arch/sh/include/cpu-sh3/cpu/mmu_context.h diff --git a/include/asm-sh/cpu-sh3/rtc.h b/arch/sh/include/cpu-sh3/cpu/rtc.h similarity index 100% rename from include/asm-sh/cpu-sh3/rtc.h rename to arch/sh/include/cpu-sh3/cpu/rtc.h diff --git a/include/asm-sh/cpu-sh3/sigcontext.h b/arch/sh/include/cpu-sh3/cpu/sigcontext.h similarity index 100% rename from include/asm-sh/cpu-sh3/sigcontext.h rename to arch/sh/include/cpu-sh3/cpu/sigcontext.h diff --git a/include/asm-sh/cpu-sh3/timer.h b/arch/sh/include/cpu-sh3/cpu/timer.h similarity index 100% rename from include/asm-sh/cpu-sh3/timer.h rename to arch/sh/include/cpu-sh3/cpu/timer.h diff --git a/include/asm-sh/cpu-sh3/ubc.h b/arch/sh/include/cpu-sh3/cpu/ubc.h similarity index 100% rename from include/asm-sh/cpu-sh3/ubc.h rename to arch/sh/include/cpu-sh3/cpu/ubc.h diff --git a/include/asm-sh/cpu-sh3/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h similarity index 100% rename from include/asm-sh/cpu-sh3/watchdog.h rename to arch/sh/include/cpu-sh3/cpu/watchdog.h diff --git a/include/asm-sh/cpu-sh4/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h similarity index 100% rename from include/asm-sh/cpu-sh4/addrspace.h rename to arch/sh/include/cpu-sh4/cpu/addrspace.h diff --git a/include/asm-sh/cpu-sh4/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h similarity index 100% rename from include/asm-sh/cpu-sh4/cache.h rename to arch/sh/include/cpu-sh4/cpu/cache.h diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h similarity index 100% rename from include/asm-sh/cpu-sh4/cacheflush.h rename to arch/sh/include/cpu-sh4/cpu/cacheflush.h diff --git a/include/asm-sh/cpu-sh4/dma-sh7780.h b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h similarity index 100% rename from include/asm-sh/cpu-sh4/dma-sh7780.h rename to arch/sh/include/cpu-sh4/cpu/dma-sh7780.h diff --git a/include/asm-sh/cpu-sh4/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h similarity index 97% rename from include/asm-sh/cpu-sh4/dma.h rename to arch/sh/include/cpu-sh4/cpu/dma.h index aaf71b018c2..235b7cd1fc9 100644 --- a/include/asm-sh/cpu-sh4/dma.h +++ b/arch/sh/include/cpu-sh4/cpu/dma.h @@ -20,7 +20,7 @@ #define CHCR_TS_MASK 0x18 #define CHCR_TS_SHIFT 3 -#include +#include #else #define SH_DMAC_BASE 0xffa00000 diff --git a/include/asm-sh/cpu-sh4/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h similarity index 100% rename from include/asm-sh/cpu-sh4/fpu.h rename to arch/sh/include/cpu-sh4/cpu/fpu.h diff --git a/include/asm-sh/cpu-sh4/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h similarity index 100% rename from include/asm-sh/cpu-sh4/freq.h rename to arch/sh/include/cpu-sh4/cpu/freq.h diff --git a/include/asm-sh/cpu-sh4/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h similarity index 100% rename from include/asm-sh/cpu-sh4/mmu_context.h rename to arch/sh/include/cpu-sh4/cpu/mmu_context.h diff --git a/include/asm-sh/cpu-sh4/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h similarity index 100% rename from include/asm-sh/cpu-sh4/rtc.h rename to arch/sh/include/cpu-sh4/cpu/rtc.h diff --git a/include/asm-sh/cpu-sh4/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h similarity index 100% rename from include/asm-sh/cpu-sh4/sigcontext.h rename to arch/sh/include/cpu-sh4/cpu/sigcontext.h diff --git a/include/asm-sh/cpu-sh4/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h similarity index 100% rename from include/asm-sh/cpu-sh4/sq.h rename to arch/sh/include/cpu-sh4/cpu/sq.h diff --git a/include/asm-sh/cpu-sh4/timer.h b/arch/sh/include/cpu-sh4/cpu/timer.h similarity index 100% rename from include/asm-sh/cpu-sh4/timer.h rename to arch/sh/include/cpu-sh4/cpu/timer.h diff --git a/include/asm-sh/cpu-sh4/ubc.h b/arch/sh/include/cpu-sh4/cpu/ubc.h similarity index 100% rename from include/asm-sh/cpu-sh4/ubc.h rename to arch/sh/include/cpu-sh4/cpu/ubc.h diff --git a/include/asm-sh/cpu-sh4/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h similarity index 100% rename from include/asm-sh/cpu-sh4/watchdog.h rename to arch/sh/include/cpu-sh4/cpu/watchdog.h diff --git a/include/asm-sh/cpu-sh5/addrspace.h b/arch/sh/include/cpu-sh5/cpu/addrspace.h similarity index 100% rename from include/asm-sh/cpu-sh5/addrspace.h rename to arch/sh/include/cpu-sh5/cpu/addrspace.h diff --git a/include/asm-sh/cpu-sh5/cache.h b/arch/sh/include/cpu-sh5/cpu/cache.h similarity index 100% rename from include/asm-sh/cpu-sh5/cache.h rename to arch/sh/include/cpu-sh5/cpu/cache.h diff --git a/include/asm-sh/cpu-sh5/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h similarity index 100% rename from include/asm-sh/cpu-sh5/cacheflush.h rename to arch/sh/include/cpu-sh5/cpu/cacheflush.h diff --git a/include/asm-sh/cpu-sh5/dma.h b/arch/sh/include/cpu-sh5/cpu/dma.h similarity index 100% rename from include/asm-sh/cpu-sh5/dma.h rename to arch/sh/include/cpu-sh5/cpu/dma.h diff --git a/include/asm-sh/cpu-sh5/irq.h b/arch/sh/include/cpu-sh5/cpu/irq.h similarity index 100% rename from include/asm-sh/cpu-sh5/irq.h rename to arch/sh/include/cpu-sh5/cpu/irq.h diff --git a/include/asm-sh/cpu-sh5/mmu_context.h b/arch/sh/include/cpu-sh5/cpu/mmu_context.h similarity index 100% rename from include/asm-sh/cpu-sh5/mmu_context.h rename to arch/sh/include/cpu-sh5/cpu/mmu_context.h diff --git a/include/asm-sh/cpu-sh5/registers.h b/arch/sh/include/cpu-sh5/cpu/registers.h similarity index 100% rename from include/asm-sh/cpu-sh5/registers.h rename to arch/sh/include/cpu-sh5/cpu/registers.h diff --git a/include/asm-sh/cpu-sh5/rtc.h b/arch/sh/include/cpu-sh5/cpu/rtc.h similarity index 100% rename from include/asm-sh/cpu-sh5/rtc.h rename to arch/sh/include/cpu-sh5/cpu/rtc.h diff --git a/include/asm-sh/cpu-sh5/timer.h b/arch/sh/include/cpu-sh5/cpu/timer.h similarity index 100% rename from include/asm-sh/cpu-sh5/timer.h rename to arch/sh/include/cpu-sh5/cpu/timer.h diff --git a/include/asm-sh/dreamcast/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h similarity index 100% rename from include/asm-sh/dreamcast/dma.h rename to arch/sh/include/mach-dreamcast/mach/dma.h diff --git a/include/asm-sh/dreamcast/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h similarity index 100% rename from include/asm-sh/dreamcast/maple.h rename to arch/sh/include/mach-dreamcast/mach/maple.h diff --git a/include/asm-sh/dreamcast/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h similarity index 95% rename from include/asm-sh/dreamcast/pci.h rename to arch/sh/include/mach-dreamcast/mach/pci.h index e401b24b0d8..9264ff46c63 100644 --- a/include/asm-sh/dreamcast/pci.h +++ b/arch/sh/include/mach-dreamcast/mach/pci.h @@ -11,7 +11,7 @@ #ifndef __ASM_SH_DREAMCAST_PCI_H #define __ASM_SH_DREAMCAST_PCI_H -#include +#include #define GAPSPCI_REGS 0x01001400 #define GAPSPCI_DMA_BASE 0x01840000 diff --git a/include/asm-sh/dreamcast/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h similarity index 100% rename from include/asm-sh/dreamcast/sysasic.h rename to arch/sh/include/mach-dreamcast/mach/sysasic.h diff --git a/include/asm-sh/landisk/gio.h b/arch/sh/include/mach-landisk/mach/gio.h similarity index 100% rename from include/asm-sh/landisk/gio.h rename to arch/sh/include/mach-landisk/mach/gio.h diff --git a/include/asm-sh/landisk/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h similarity index 100% rename from include/asm-sh/landisk/iodata_landisk.h rename to arch/sh/include/mach-landisk/mach/iodata_landisk.h diff --git a/include/asm-sh/sh03/io.h b/arch/sh/include/mach-sh03/mach/io.h similarity index 100% rename from include/asm-sh/sh03/io.h rename to arch/sh/include/mach-sh03/mach/io.h diff --git a/include/asm-sh/sh03/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h similarity index 100% rename from include/asm-sh/sh03/sh03.h rename to arch/sh/include/mach-sh03/mach/sh03.h diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index 79baa47af97..726f0335da7 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include /* diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index ee894e5a45e..becc54c4569 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S index 47096dc3d20..ab3903eeda5 100644 --- a/arch/sh/kernel/cpu/sh2a/entry.S +++ b/arch/sh/kernel/cpu/sh2a/entry.S @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 4004073f98c..3fe482dd05c 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include ! NOTE: diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index 8020796139f..2d452f67fb8 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c index 7b2d337ee41..828cb57cb95 100644 --- a/arch/sh/kernel/cpu/sh4/softfloat.c +++ b/arch/sh/kernel/cpu/sh4/softfloat.c @@ -36,7 +36,7 @@ * and Kamel Khelifi */ #include -#include +#include #define LIT64( a ) a##LL diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index 9561b02ade0..dcdf959a3d4 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include struct sq_mapping; diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index 05372ed6c56..ca08e7f26a3 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -11,7 +11,7 @@ */ #include #include -#include +#include #include #include #include diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S index f42d4c0feb7..7ccfb995a39 100644 --- a/arch/sh/kernel/head_64.S +++ b/arch/sh/kernel/head_64.S @@ -11,8 +11,8 @@ #include #include #include -#include -#include +#include +#include #include /* diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index a2a99e487e3..64b7690c664 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include atomic_t irq_err_count; diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c index 022a55f1c1d..791edabf7d8 100644 --- a/arch/sh/kernel/time_64.c +++ b/arch/sh/kernel/time_64.c @@ -33,8 +33,8 @@ #include #include #include -#include /* required by inline __asm__ stmt. */ -#include +#include /* required by inline __asm__ stmt. */ +#include #include #include #include diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c index ff559e2a96f..da32ba7b5fc 100644 --- a/arch/sh/lib64/panic.c +++ b/arch/sh/lib64/panic.c @@ -8,7 +8,7 @@ #include #include -#include +#include /* THIS IS A PHYSICAL ADDRESS */ #define HDSP2534_ADDR (0x04002100) diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c index 399d53710d2..bd63b961b2a 100644 --- a/arch/sh/mm/fault_64.c +++ b/arch/sh/mm/fault_64.c @@ -39,7 +39,7 @@ #include #include #include -#include +#include /* Callable from fault.c, so not static */ inline void __do_tlb_refill(unsigned long address, diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile index 567516b58ac..b5d202be820 100644 --- a/arch/sh/tools/Makefile +++ b/arch/sh/tools/Makefile @@ -10,7 +10,7 @@ # Shamelessly cloned from ARM. # -include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types +arch/sh/include/asm/machtypes.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi + $(Q)if [ ! -d arch/sh/include/asm ]; then mkdir -p arch/sh/include/asm; fi $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/include/asm-sh/cpu-sh2a/cacheflush.h b/include/asm-sh/cpu-sh2a/cacheflush.h deleted file mode 100644 index fa3186c7335..00000000000 --- a/include/asm-sh/cpu-sh2a/cacheflush.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/dma.h b/include/asm-sh/cpu-sh2a/dma.h deleted file mode 100644 index 0d5ad85c1de..00000000000 --- a/include/asm-sh/cpu-sh2a/dma.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/mmu_context.h b/include/asm-sh/cpu-sh2a/mmu_context.h deleted file mode 100644 index cd2387f7db9..00000000000 --- a/include/asm-sh/cpu-sh2a/mmu_context.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/timer.h b/include/asm-sh/cpu-sh2a/timer.h deleted file mode 100644 index fee504adf11..00000000000 --- a/include/asm-sh/cpu-sh2a/timer.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/ubc.h b/include/asm-sh/cpu-sh2a/ubc.h deleted file mode 100644 index cf28062b96a..00000000000 --- a/include/asm-sh/cpu-sh2a/ubc.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/include/asm-sh/cpu-sh2a/watchdog.h b/include/asm-sh/cpu-sh2a/watchdog.h deleted file mode 100644 index c1b3e248847..00000000000 --- a/include/asm-sh/cpu-sh2a/watchdog.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/sound/sh/aica.c b/sound/sh/aica.c index 9ca11332614..54df8baf916 100644 --- a/sound/sh/aica.c +++ b/sound/sh/aica.c @@ -42,7 +42,7 @@ #include #include #include -#include +#include #include "aica.h" MODULE_AUTHOR("Adrian McMenamin "); -- GitLab From cc64f7f70033d6cf18f716c885a7df858ad51766 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 08:24:50 +0900 Subject: [PATCH 0203/1024] sh: dreamcast: fix build failure from header reorg. Oops, machvec.h is in asm/, it was previously removed due to overzealous trimming. Fix up the path again. Signed-off-by: Paul Mundt --- arch/sh/boards/dreamcast/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c index 14c3e57ff41..7d944fc75e9 100644 --- a/arch/sh/boards/dreamcast/setup.c +++ b/arch/sh/boards/dreamcast/setup.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include extern struct hw_interrupt_type systemasic_int; -- GitLab From b9edb17cc268bc4c6f344264fb9af73f646a02c1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 08:29:32 +0900 Subject: [PATCH 0204/1024] sh: Add an arch/sh/kernel/.gitignore Ignore vmlinux.lds. Signed-off-by: Paul Mundt --- arch/sh/kernel/.gitignore | 1 + 1 file changed, 1 insertion(+) create mode 100644 arch/sh/kernel/.gitignore diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore new file mode 100644 index 00000000000..c5f676c3c22 --- /dev/null +++ b/arch/sh/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds -- GitLab From d27e0854d5773fffe1a1d475032b715d124325ae Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 09:15:01 +0900 Subject: [PATCH 0205/1024] sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation. If none is defined, provide a sane default, as we do for the other options. Signed-off-by: Paul Mundt --- arch/sh/boot/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 8b37869a822..5b54965eef9 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -18,9 +18,10 @@ CONFIG_PAGE_OFFSET ?= 0x80000000 CONFIG_MEMORY_START ?= 0x0c000000 CONFIG_BOOT_LINK_OFFSET ?= 0x00800000 CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000 +CONFIG_ENTRY_OFFSET ?= 0x00001000 export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \ - CONFIG_ZERO_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET targets := zImage vmlinux.srec uImage uImage.srec subdir- := compressed -- GitLab From 6de9c6481d47c6da5f8b81f75a5c24c69c366f37 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 29 Jul 2008 09:16:33 +0900 Subject: [PATCH 0206/1024] sh: Proper __put_user_asm() size mismatch fix. This fixes up the workaround in 2b4b2bb42137c779ef0084de5df66ff21b4cd86e and cleans up __put_user_asm() to get the sizing right from the onset. Signed-off-by: OGAWA Hirofumi Signed-off-by: Paul Mundt --- arch/sh/include/asm/uaccess.h | 6 ++++-- arch/sh/include/asm/uaccess_32.h | 3 +-- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h index 45c2c9b2993..075848f43b6 100644 --- a/arch/sh/include/asm/uaccess.h +++ b/arch/sh/include/asm/uaccess.h @@ -77,8 +77,9 @@ struct __large_struct { unsigned long buf[100]; }; ({ \ long __pu_err; \ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = x; \ __chk_user_ptr(ptr); \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ + __put_user_size(__pu_val, __pu_addr, (size), __pu_err); \ __pu_err; \ }) @@ -86,8 +87,9 @@ struct __large_struct { unsigned long buf[100]; }; ({ \ long __pu_err = -EFAULT; \ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = x; \ if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ - __put_user_size((x), __pu_addr, (size), \ + __put_user_size(__pu_val, __pu_addr, (size), \ __pu_err); \ __pu_err; \ }) diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h index 892fd6dea9d..ae0d24f6653 100644 --- a/arch/sh/include/asm/uaccess_32.h +++ b/arch/sh/include/asm/uaccess_32.h @@ -76,8 +76,7 @@ do { \ __put_user_asm(x, ptr, retval, "w"); \ break; \ case 4: \ - __put_user_asm((u32)x, ptr, \ - retval, "l"); \ + __put_user_asm(x, ptr, retval, "l"); \ break; \ case 8: \ __put_user_u64(x, ptr, retval); \ -- GitLab From df10cfbc4d7ab93260d997df754219d390d62a9d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 28 Jul 2008 23:10:39 -0700 Subject: [PATCH 0207/1024] md: do not progress the resync process if the stripe was blocked handle_stripe will take no action on a stripe when waiting for userspace to unblock the array, so do not report completed sectors. Signed-off-by: Dan Williams --- drivers/md/raid5.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 46132fca346..b428e15d59a 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2507,7 +2507,7 @@ static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh, * */ -static void handle_stripe5(struct stripe_head *sh) +static bool handle_stripe5(struct stripe_head *sh) { raid5_conf_t *conf = sh->raid_conf; int disks = sh->disks, i; @@ -2755,9 +2755,11 @@ static void handle_stripe5(struct stripe_head *sh) ops_run_io(sh, &s); return_io(return_bi); + + return blocked_rdev == NULL; } -static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) +static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page) { raid6_conf_t *conf = sh->raid_conf; int disks = sh->disks; @@ -2968,14 +2970,17 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) ops_run_io(sh, &s); return_io(return_bi); + + return blocked_rdev == NULL; } -static void handle_stripe(struct stripe_head *sh, struct page *tmp_page) +/* returns true if the stripe was handled */ +static bool handle_stripe(struct stripe_head *sh, struct page *tmp_page) { if (sh->raid_conf->level == 6) - handle_stripe6(sh, tmp_page); + return handle_stripe6(sh, tmp_page); else - handle_stripe5(sh); + return handle_stripe5(sh); } @@ -3691,7 +3696,9 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski clear_bit(STRIPE_INSYNC, &sh->state); spin_unlock(&sh->lock); - handle_stripe(sh, NULL); + /* wait for any blocked device to be handled */ + while(unlikely(!handle_stripe(sh, NULL))) + ; release_stripe(sh); return STRIPE_SECTORS; -- GitLab From e542713529e323ff09d7aeb5806cf29f6f160f53 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 28 Jul 2008 23:28:06 -0700 Subject: [PATCH 0208/1024] md: do not count blocked devices as spares remove_and_add_spares() assumes that failed devices have been hot-removed from the array. Removal is skipped in the 'blocked' case so do not count a device in this state as 'spare'. Signed-off-by: Dan Williams --- drivers/md/md.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 0f1b8309642..c7aae66c6f9 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5996,7 +5996,8 @@ static int remove_and_add_spares(mddev_t *mddev) if (mddev->degraded) { rdev_for_each(rdev, rtmp, mddev) { if (rdev->raid_disk >= 0 && - !test_bit(In_sync, &rdev->flags)) + !test_bit(In_sync, &rdev->flags) && + !test_bit(Blocked, &rdev->flags)) spares++; if (rdev->raid_disk < 0 && !test_bit(Faulty, &rdev->flags)) { -- GitLab From 4864841a34ad77a5054f20d18453ae38a926afd8 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 29 Jul 2008 14:37:25 +0900 Subject: [PATCH 0209/1024] sh: Fix compile error of Solution Engine When I compiled Solution Engine, this become compile error because plaform device of sh_eth device becomes enable. When sh7710/sh7712 which could use sh_eth was chosen, revised it so that platform device of sh_eth device became enable. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/se/770x/setup.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index cf4a5ba12df..6c64d774da3 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -113,6 +113,8 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7712) /* SH771X Ethernet driver */ static struct resource sh_eth0_resources[] = { [0] = { @@ -159,12 +161,16 @@ static struct platform_device sh_eth1_device = { .num_resources = ARRAY_SIZE(sh_eth1_resources), .resource = sh_eth1_resources, }; +#endif static struct platform_device *se_devices[] __initdata = { &heartbeat_device, &cf_ide_device, +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7712) &sh_eth0_device, &sh_eth1_device, +#endif }; static int __init se_devices_setup(void) -- GitLab From a1708ce8a362c4999f1201237ae7b77c4d13af82 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Fri, 25 Jul 2008 16:26:39 +0200 Subject: [PATCH 0210/1024] KVM: Allow reading aliases with mmu_lock This allows the mmu notifier code to run unalias_gfn with only the mmu_lock held. Only alias writes need the mmu_lock held. Readers will either take the slots_lock in read mode or the mmu_lock. Signed-off-by: Andrea Arcangeli Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 5916191420c..9870ce42292 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1495,6 +1495,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm, goto out; down_write(&kvm->slots_lock); + spin_lock(&kvm->mmu_lock); p = &kvm->arch.aliases[alias->slot]; p->base_gfn = alias->guest_phys_addr >> PAGE_SHIFT; @@ -1506,6 +1507,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm, break; kvm->arch.naliases = n; + spin_unlock(&kvm->mmu_lock); kvm_mmu_zap_all(kvm); up_write(&kvm->slots_lock); -- GitLab From 604b38ac0369bd50fcbb33344aa5553c071009f7 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Fri, 25 Jul 2008 16:32:03 +0200 Subject: [PATCH 0211/1024] KVM: Allow browsing memslots with mmu_lock This allows reading memslots with only the mmu_lock hold for mmu notifiers that runs in atomic context and with mmu_lock held. Signed-off-by: Andrea Arcangeli Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 21 ++++++++++++++------- virt/kvm/kvm_main.c | 20 ++++++++++++++++---- 2 files changed, 30 insertions(+), 11 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 9870ce42292..c7b01efe064 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3974,16 +3974,23 @@ int kvm_arch_set_memory_region(struct kvm *kvm, */ if (!user_alloc) { if (npages && !old.rmap) { + unsigned long userspace_addr; + down_write(¤t->mm->mmap_sem); - memslot->userspace_addr = do_mmap(NULL, 0, - npages * PAGE_SIZE, - PROT_READ | PROT_WRITE, - MAP_SHARED | MAP_ANONYMOUS, - 0); + userspace_addr = do_mmap(NULL, 0, + npages * PAGE_SIZE, + PROT_READ | PROT_WRITE, + MAP_SHARED | MAP_ANONYMOUS, + 0); up_write(¤t->mm->mmap_sem); - if (IS_ERR((void *)memslot->userspace_addr)) - return PTR_ERR((void *)memslot->userspace_addr); + if (IS_ERR((void *)userspace_addr)) + return PTR_ERR((void *)userspace_addr); + + /* set userspace_addr atomically for kvm_hva_to_rmapp */ + spin_lock(&kvm->mmu_lock); + memslot->userspace_addr = userspace_addr; + spin_unlock(&kvm->mmu_lock); } else { if (!old.user_alloc && old.rmap) { int ret; diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index a845890b680..3735212cd3f 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -375,7 +375,15 @@ int __kvm_set_memory_region(struct kvm *kvm, memset(new.rmap, 0, npages * sizeof(*new.rmap)); new.user_alloc = user_alloc; - new.userspace_addr = mem->userspace_addr; + /* + * hva_to_rmmap() serialzies with the mmu_lock and to be + * safe it has to ignore memslots with !user_alloc && + * !userspace_addr. + */ + if (user_alloc) + new.userspace_addr = mem->userspace_addr; + else + new.userspace_addr = 0; } if (npages && !new.lpage_info) { int largepages = npages / KVM_PAGES_PER_HPAGE; @@ -408,17 +416,21 @@ int __kvm_set_memory_region(struct kvm *kvm, } #endif /* not defined CONFIG_S390 */ - if (mem->slot >= kvm->nmemslots) - kvm->nmemslots = mem->slot + 1; - if (!npages) kvm_arch_flush_shadow(kvm); + spin_lock(&kvm->mmu_lock); + if (mem->slot >= kvm->nmemslots) + kvm->nmemslots = mem->slot + 1; + *memslot = new; + spin_unlock(&kvm->mmu_lock); r = kvm_arch_set_memory_region(kvm, mem, old, user_alloc); if (r) { + spin_lock(&kvm->mmu_lock); *memslot = old; + spin_unlock(&kvm->mmu_lock); goto out_free; } -- GitLab From e930bffe95e1e886a1ede80726ea38df5838d067 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Fri, 25 Jul 2008 16:24:52 +0200 Subject: [PATCH 0212/1024] KVM: Synchronize guest physical memory map to host virtual memory map Synchronize changes to host virtual addresses which are part of a KVM memory slot to the KVM shadow mmu. This allows pte operations like swapping, page migration, and madvise() to transparently work with KVM. Signed-off-by: Andrea Arcangeli Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 100 +++++++++++++++++++++++++++ arch/x86/kvm/paging_tmpl.h | 12 ++++ include/asm-x86/kvm_host.h | 6 ++ include/linux/kvm_host.h | 24 +++++++ virt/kvm/kvm_main.c | 135 +++++++++++++++++++++++++++++++++++++ 5 files changed, 277 insertions(+) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 2fa231923cf..0bfe2bd305e 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -653,6 +653,84 @@ static void rmap_write_protect(struct kvm *kvm, u64 gfn) account_shadowed(kvm, gfn); } +static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp) +{ + u64 *spte; + int need_tlb_flush = 0; + + while ((spte = rmap_next(kvm, rmapp, NULL))) { + BUG_ON(!(*spte & PT_PRESENT_MASK)); + rmap_printk("kvm_rmap_unmap_hva: spte %p %llx\n", spte, *spte); + rmap_remove(kvm, spte); + set_shadow_pte(spte, shadow_trap_nonpresent_pte); + need_tlb_flush = 1; + } + return need_tlb_flush; +} + +static int kvm_handle_hva(struct kvm *kvm, unsigned long hva, + int (*handler)(struct kvm *kvm, unsigned long *rmapp)) +{ + int i; + int retval = 0; + + /* + * If mmap_sem isn't taken, we can look the memslots with only + * the mmu_lock by skipping over the slots with userspace_addr == 0. + */ + for (i = 0; i < kvm->nmemslots; i++) { + struct kvm_memory_slot *memslot = &kvm->memslots[i]; + unsigned long start = memslot->userspace_addr; + unsigned long end; + + /* mmu_lock protects userspace_addr */ + if (!start) + continue; + + end = start + (memslot->npages << PAGE_SHIFT); + if (hva >= start && hva < end) { + gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT; + retval |= handler(kvm, &memslot->rmap[gfn_offset]); + retval |= handler(kvm, + &memslot->lpage_info[ + gfn_offset / + KVM_PAGES_PER_HPAGE].rmap_pde); + } + } + + return retval; +} + +int kvm_unmap_hva(struct kvm *kvm, unsigned long hva) +{ + return kvm_handle_hva(kvm, hva, kvm_unmap_rmapp); +} + +static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp) +{ + u64 *spte; + int young = 0; + + spte = rmap_next(kvm, rmapp, NULL); + while (spte) { + int _young; + u64 _spte = *spte; + BUG_ON(!(_spte & PT_PRESENT_MASK)); + _young = _spte & PT_ACCESSED_MASK; + if (_young) { + young = 1; + clear_bit(PT_ACCESSED_SHIFT, (unsigned long *)spte); + } + spte = rmap_next(kvm, rmapp, spte); + } + return young; +} + +int kvm_age_hva(struct kvm *kvm, unsigned long hva) +{ + return kvm_handle_hva(kvm, hva, kvm_age_rmapp); +} + #ifdef MMU_DEBUG static int is_empty_shadow_page(u64 *spt) { @@ -1203,6 +1281,7 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn) int r; int largepage = 0; pfn_t pfn; + unsigned long mmu_seq; down_read(¤t->mm->mmap_sem); if (is_largepage_backed(vcpu, gfn & ~(KVM_PAGES_PER_HPAGE-1))) { @@ -1210,6 +1289,8 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn) largepage = 1; } + mmu_seq = vcpu->kvm->mmu_notifier_seq; + /* implicit mb(), we'll read before PT lock is unlocked */ pfn = gfn_to_pfn(vcpu->kvm, gfn); up_read(¤t->mm->mmap_sem); @@ -1220,6 +1301,8 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn) } spin_lock(&vcpu->kvm->mmu_lock); + if (mmu_notifier_retry(vcpu, mmu_seq)) + goto out_unlock; kvm_mmu_free_some_pages(vcpu); r = __direct_map(vcpu, v, write, largepage, gfn, pfn, PT32E_ROOT_LEVEL); @@ -1227,6 +1310,11 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn) return r; + +out_unlock: + spin_unlock(&vcpu->kvm->mmu_lock); + kvm_release_pfn_clean(pfn); + return 0; } @@ -1345,6 +1433,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa, int r; int largepage = 0; gfn_t gfn = gpa >> PAGE_SHIFT; + unsigned long mmu_seq; ASSERT(vcpu); ASSERT(VALID_PAGE(vcpu->arch.mmu.root_hpa)); @@ -1358,6 +1447,8 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa, gfn &= ~(KVM_PAGES_PER_HPAGE-1); largepage = 1; } + mmu_seq = vcpu->kvm->mmu_notifier_seq; + /* implicit mb(), we'll read before PT lock is unlocked */ pfn = gfn_to_pfn(vcpu->kvm, gfn); up_read(¤t->mm->mmap_sem); if (is_error_pfn(pfn)) { @@ -1365,12 +1456,19 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa, return 1; } spin_lock(&vcpu->kvm->mmu_lock); + if (mmu_notifier_retry(vcpu, mmu_seq)) + goto out_unlock; kvm_mmu_free_some_pages(vcpu); r = __direct_map(vcpu, gpa, error_code & PFERR_WRITE_MASK, largepage, gfn, pfn, kvm_x86_ops->get_tdp_level()); spin_unlock(&vcpu->kvm->mmu_lock); return r; + +out_unlock: + spin_unlock(&vcpu->kvm->mmu_lock); + kvm_release_pfn_clean(pfn); + return 0; } static void nonpaging_free(struct kvm_vcpu *vcpu) @@ -1670,6 +1768,8 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa, gfn &= ~(KVM_PAGES_PER_HPAGE-1); vcpu->arch.update_pte.largepage = 1; } + vcpu->arch.update_pte.mmu_seq = vcpu->kvm->mmu_notifier_seq; + /* implicit mb(), we'll read before PT lock is unlocked */ pfn = gfn_to_pfn(vcpu->kvm, gfn); up_read(¤t->mm->mmap_sem); diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index 4d918220bae..f72ac1fa35f 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -263,6 +263,8 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page, pfn = vcpu->arch.update_pte.pfn; if (is_error_pfn(pfn)) return; + if (mmu_notifier_retry(vcpu, vcpu->arch.update_pte.mmu_seq)) + return; kvm_get_pfn(pfn); mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0, gpte & PT_DIRTY_MASK, NULL, largepage, gpte_to_gfn(gpte), @@ -380,6 +382,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, int r; pfn_t pfn; int largepage = 0; + unsigned long mmu_seq; pgprintk("%s: addr %lx err %x\n", __func__, addr, error_code); kvm_mmu_audit(vcpu, "pre page fault"); @@ -413,6 +416,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, largepage = 1; } } + mmu_seq = vcpu->kvm->mmu_notifier_seq; + /* implicit mb(), we'll read before PT lock is unlocked */ pfn = gfn_to_pfn(vcpu->kvm, walker.gfn); up_read(¤t->mm->mmap_sem); @@ -424,6 +429,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, } spin_lock(&vcpu->kvm->mmu_lock); + if (mmu_notifier_retry(vcpu, mmu_seq)) + goto out_unlock; kvm_mmu_free_some_pages(vcpu); shadow_pte = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault, largepage, &write_pt, pfn); @@ -439,6 +446,11 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, spin_unlock(&vcpu->kvm->mmu_lock); return write_pt; + +out_unlock: + spin_unlock(&vcpu->kvm->mmu_lock); + kvm_release_pfn_clean(pfn); + return 0; } static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr) diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h index bc34dc21f17..0f3c5311461 100644 --- a/include/asm-x86/kvm_host.h +++ b/include/asm-x86/kvm_host.h @@ -13,6 +13,7 @@ #include #include +#include #include #include @@ -251,6 +252,7 @@ struct kvm_vcpu_arch { gfn_t gfn; /* presumed gfn during guest pte update */ pfn_t pfn; /* pfn corresponding to that gfn */ int largepage; + unsigned long mmu_seq; } update_pte; struct i387_fxsave_struct host_fx_image; @@ -729,4 +731,8 @@ asmlinkage void kvm_handle_fault_on_reboot(void); KVM_EX_ENTRY " 666b, 667b \n\t" \ ".popsection" +#define KVM_ARCH_WANT_MMU_NOTIFIER +int kvm_unmap_hva(struct kvm *kvm, unsigned long hva); +int kvm_age_hva(struct kvm *kvm, unsigned long hva); + #endif diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 07d68a8ae8e..8525afc5310 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -121,6 +121,12 @@ struct kvm { struct kvm_coalesced_mmio_dev *coalesced_mmio_dev; struct kvm_coalesced_mmio_ring *coalesced_mmio_ring; #endif + +#ifdef KVM_ARCH_WANT_MMU_NOTIFIER + struct mmu_notifier mmu_notifier; + unsigned long mmu_notifier_seq; + long mmu_notifier_count; +#endif }; /* The guest did something we don't support. */ @@ -332,4 +338,22 @@ int kvm_trace_ioctl(unsigned int ioctl, unsigned long arg) #define kvm_trace_cleanup() ((void)0) #endif +#ifdef KVM_ARCH_WANT_MMU_NOTIFIER +static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_seq) +{ + if (unlikely(vcpu->kvm->mmu_notifier_count)) + return 1; + /* + * Both reads happen under the mmu_lock and both values are + * modified under mmu_lock, so there's no need of smb_rmb() + * here in between, otherwise mmu_notifier_count should be + * read before mmu_notifier_seq, see + * mmu_notifier_invalidate_range_end write side. + */ + if (vcpu->kvm->mmu_notifier_seq != mmu_seq) + return 1; + return 0; +} +#endif + #endif diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 3735212cd3f..7dd9b0b85e4 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -192,6 +192,123 @@ void kvm_vcpu_uninit(struct kvm_vcpu *vcpu) } EXPORT_SYMBOL_GPL(kvm_vcpu_uninit); +#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) +static inline struct kvm *mmu_notifier_to_kvm(struct mmu_notifier *mn) +{ + return container_of(mn, struct kvm, mmu_notifier); +} + +static void kvm_mmu_notifier_invalidate_page(struct mmu_notifier *mn, + struct mm_struct *mm, + unsigned long address) +{ + struct kvm *kvm = mmu_notifier_to_kvm(mn); + int need_tlb_flush; + + /* + * When ->invalidate_page runs, the linux pte has been zapped + * already but the page is still allocated until + * ->invalidate_page returns. So if we increase the sequence + * here the kvm page fault will notice if the spte can't be + * established because the page is going to be freed. If + * instead the kvm page fault establishes the spte before + * ->invalidate_page runs, kvm_unmap_hva will release it + * before returning. + * + * The sequence increase only need to be seen at spin_unlock + * time, and not at spin_lock time. + * + * Increasing the sequence after the spin_unlock would be + * unsafe because the kvm page fault could then establish the + * pte after kvm_unmap_hva returned, without noticing the page + * is going to be freed. + */ + spin_lock(&kvm->mmu_lock); + kvm->mmu_notifier_seq++; + need_tlb_flush = kvm_unmap_hva(kvm, address); + spin_unlock(&kvm->mmu_lock); + + /* we've to flush the tlb before the pages can be freed */ + if (need_tlb_flush) + kvm_flush_remote_tlbs(kvm); + +} + +static void kvm_mmu_notifier_invalidate_range_start(struct mmu_notifier *mn, + struct mm_struct *mm, + unsigned long start, + unsigned long end) +{ + struct kvm *kvm = mmu_notifier_to_kvm(mn); + int need_tlb_flush = 0; + + spin_lock(&kvm->mmu_lock); + /* + * The count increase must become visible at unlock time as no + * spte can be established without taking the mmu_lock and + * count is also read inside the mmu_lock critical section. + */ + kvm->mmu_notifier_count++; + for (; start < end; start += PAGE_SIZE) + need_tlb_flush |= kvm_unmap_hva(kvm, start); + spin_unlock(&kvm->mmu_lock); + + /* we've to flush the tlb before the pages can be freed */ + if (need_tlb_flush) + kvm_flush_remote_tlbs(kvm); +} + +static void kvm_mmu_notifier_invalidate_range_end(struct mmu_notifier *mn, + struct mm_struct *mm, + unsigned long start, + unsigned long end) +{ + struct kvm *kvm = mmu_notifier_to_kvm(mn); + + spin_lock(&kvm->mmu_lock); + /* + * This sequence increase will notify the kvm page fault that + * the page that is going to be mapped in the spte could have + * been freed. + */ + kvm->mmu_notifier_seq++; + /* + * The above sequence increase must be visible before the + * below count decrease but both values are read by the kvm + * page fault under mmu_lock spinlock so we don't need to add + * a smb_wmb() here in between the two. + */ + kvm->mmu_notifier_count--; + spin_unlock(&kvm->mmu_lock); + + BUG_ON(kvm->mmu_notifier_count < 0); +} + +static int kvm_mmu_notifier_clear_flush_young(struct mmu_notifier *mn, + struct mm_struct *mm, + unsigned long address) +{ + struct kvm *kvm = mmu_notifier_to_kvm(mn); + int young; + + spin_lock(&kvm->mmu_lock); + young = kvm_age_hva(kvm, address); + spin_unlock(&kvm->mmu_lock); + + if (young) + kvm_flush_remote_tlbs(kvm); + + return young; +} + +static const struct mmu_notifier_ops kvm_mmu_notifier_ops = { + .invalidate_page = kvm_mmu_notifier_invalidate_page, + .invalidate_range_start = kvm_mmu_notifier_invalidate_range_start, + .invalidate_range_end = kvm_mmu_notifier_invalidate_range_end, + .clear_flush_young = kvm_mmu_notifier_clear_flush_young, +}; +#endif /* CONFIG_MMU_NOTIFIER && KVM_ARCH_WANT_MMU_NOTIFIER */ + static struct kvm *kvm_create_vm(void) { struct kvm *kvm = kvm_arch_create_vm(); @@ -212,6 +329,21 @@ static struct kvm *kvm_create_vm(void) (struct kvm_coalesced_mmio_ring *)page_address(page); #endif +#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) + { + int err; + kvm->mmu_notifier.ops = &kvm_mmu_notifier_ops; + err = mmu_notifier_register(&kvm->mmu_notifier, current->mm); + if (err) { +#ifdef KVM_COALESCED_MMIO_PAGE_OFFSET + put_page(page); +#endif + kfree(kvm); + return ERR_PTR(err); + } + } +#endif + kvm->mm = current->mm; atomic_inc(&kvm->mm->mm_count); spin_lock_init(&kvm->mmu_lock); @@ -271,6 +403,9 @@ static void kvm_destroy_vm(struct kvm *kvm) #ifdef KVM_COALESCED_MMIO_PAGE_OFFSET if (kvm->coalesced_mmio_ring != NULL) free_page((unsigned long)kvm->coalesced_mmio_ring); +#endif +#if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) + mmu_notifier_unregister(&kvm->mmu_notifier, kvm->mm); #endif kvm_arch_destroy_vm(kvm); mmdrop(mm); -- GitLab From ed8486243379ef3e6c61363df915882945c0eaec Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 29 Jul 2008 11:30:57 +0300 Subject: [PATCH 0213/1024] KVM: Advertise synchronized mmu support to userspace Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 1 + include/linux/kvm.h | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index c7b01efe064..0d682fc6aeb 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -883,6 +883,7 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_PIT: case KVM_CAP_NOP_IO_DELAY: case KVM_CAP_MP_STATE: + case KVM_CAP_SYNC_MMU: r = 1; break; case KVM_CAP_COALESCED_MMIO: diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 0ea064cbfbc..69511f74f91 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -371,6 +371,7 @@ struct kvm_trace_rec { #define KVM_CAP_PV_MMU 13 #define KVM_CAP_MP_STATE 14 #define KVM_CAP_COALESCED_MMIO 15 +#define KVM_CAP_SYNC_MMU 16 /* Changes to host mmap are reflected in guest */ /* * ioctls for VM fds -- GitLab From 8978b74253280d59e97cf49a3ec2c0cbccd5b801 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 29 Jul 2008 13:38:53 +0900 Subject: [PATCH 0214/1024] generic, x86: fix add iommu_num_pages helper function This IOMMU helper function doesn't work for some architectures: http://marc.info/?l=linux-kernel&m=121699304403202&w=2 It also breaks POWER and SPARC builds: http://marc.info/?l=linux-kernel&m=121730388001890&w=2 Currently, only x86 IOMMUs use this so let's move it to x86 for now. Reported-by: Stephen Rothwell Signed-off-by: FUJITA Tomonori Signed-off-by: Ingo Molnar --- arch/x86/kernel/pci-dma.c | 8 ++++++++ include/asm-x86/iommu.h | 2 ++ include/linux/iommu-helper.h | 1 - lib/iommu-helper.c | 8 -------- 4 files changed, 10 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 8dbffb846de..87d4d6964ec 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -123,6 +123,14 @@ void __init pci_iommu_alloc(void) pci_swiotlb_init(); } + +unsigned long iommu_num_pages(unsigned long addr, unsigned long len) +{ + unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE); + + return size >> PAGE_SHIFT; +} +EXPORT_SYMBOL(iommu_num_pages); #endif /* diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h index ecc8061904a..5f888cc5be4 100644 --- a/include/asm-x86/iommu.h +++ b/include/asm-x86/iommu.h @@ -7,6 +7,8 @@ extern struct dma_mapping_ops nommu_dma_ops; extern int force_iommu, no_iommu; extern int iommu_detected; +extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len); + #ifdef CONFIG_GART_IOMMU extern int gart_iommu_aperture; extern int gart_iommu_aperture_allowed; diff --git a/include/linux/iommu-helper.h b/include/linux/iommu-helper.h index f8598f58394..c975caf7538 100644 --- a/include/linux/iommu-helper.h +++ b/include/linux/iommu-helper.h @@ -8,4 +8,3 @@ extern unsigned long iommu_area_alloc(unsigned long *map, unsigned long size, unsigned long align_mask); extern void iommu_area_free(unsigned long *map, unsigned long start, unsigned int nr); -extern unsigned long iommu_num_pages(unsigned long addr, unsigned long len); diff --git a/lib/iommu-helper.c b/lib/iommu-helper.c index 889ddce2021..a3b8d4c3f77 100644 --- a/lib/iommu-helper.c +++ b/lib/iommu-helper.c @@ -80,11 +80,3 @@ void iommu_area_free(unsigned long *map, unsigned long start, unsigned int nr) } } EXPORT_SYMBOL(iommu_area_free); - -unsigned long iommu_num_pages(unsigned long addr, unsigned long len) -{ - unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE); - - return size >> PAGE_SHIFT; -} -EXPORT_SYMBOL(iommu_num_pages); -- GitLab From a7b815169aae65072017efb1fba9dcecc82ba7c1 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sat, 26 Jul 2008 20:43:01 +0800 Subject: [PATCH 0215/1024] ALSA: sound/soc/pxa/tosa.c: removed duplicated include Removed duplicated include in sound/soc/pxa/tosa.c. Signed-off-by: Huang Weiyi Acked-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/pxa/tosa.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index fe6cca9c9e7..22971a0f040 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -33,7 +33,6 @@ #include #include #include -#include #include "../codecs/wm9712.h" #include "pxa2xx-pcm.h" -- GitLab From be41e941d5f1a48bde7f44d09d56e8d2605f98e1 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 28 Jul 2008 17:04:39 -0500 Subject: [PATCH 0216/1024] ALSA: asoc: restrict sample rate and size in Freescale MPC8610 sound drivers The Freescale MPC8610 SSI device has the option of using one clock for both transmit and receive (synchronous mode), or independent clocks (asynchronous). The SSI driver, however, programs the SSI into synchronous mode and then tries to program the clock registers independently. The result is that the wrong sample size is usually generated during recording. This patch fixes the discrepancy by restricting the sample rate and sample size of the playback and capture streams. The SSI driver remembers which stream is opened first. When a second stream is opened, that stream is constrained to the same sample rate and size as the first stream. A future version of this driver will lift the sample size restriction. Supporting independent sample rates is more difficult, because only certain codecs provide dual independent clocks. Signed-off-by: Timur Tabi Signed-off-by: Takashi Iwai --- sound/soc/fsl/fsl_dma.c | 7 +++- sound/soc/fsl/fsl_ssi.c | 74 +++++++++++++++++++++++++++++++++++------ 2 files changed, 70 insertions(+), 11 deletions(-) diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index da2bc590286..7ceea2bba1f 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -132,12 +132,17 @@ struct fsl_dma_private { * Since each link descriptor has a 32-bit byte count field, we set * period_bytes_max to the largest 32-bit number. We also have no maximum * number of periods. + * + * Note that we specify SNDRV_PCM_INFO_JOINT_DUPLEX here, but only because a + * limitation in the SSI driver requires the sample rates for playback and + * capture to be the same. */ static const struct snd_pcm_hardware fsl_dma_hardware = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_JOINT_DUPLEX, .formats = FSLDMA_PCM_FORMATS, .rates = FSLDMA_PCM_RATES, .rate_min = 5512, diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 71bff33f552..157a7895ffa 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -67,6 +67,8 @@ * @ssi: pointer to the SSI's registers * @ssi_phys: physical address of the SSI registers * @irq: IRQ of this SSI + * @first_stream: pointer to the stream that was opened first + * @second_stream: pointer to second stream * @dev: struct device pointer * @playback: the number of playback streams opened * @capture: the number of capture streams opened @@ -79,6 +81,8 @@ struct fsl_ssi_private { struct ccsr_ssi __iomem *ssi; dma_addr_t ssi_phys; unsigned int irq; + struct snd_pcm_substream *first_stream; + struct snd_pcm_substream *second_stream; struct device *dev; unsigned int playback; unsigned int capture; @@ -342,6 +346,49 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream) */ } + if (!ssi_private->first_stream) + ssi_private->first_stream = substream; + else { + /* This is the second stream open, so we need to impose sample + * rate and maybe sample size constraints. Note that this can + * cause a race condition if the second stream is opened before + * the first stream is fully initialized. + * + * We provide some protection by checking to make sure the first + * stream is initialized, but it's not perfect. ALSA sometimes + * re-initializes the driver with a different sample rate or + * size. If the second stream is opened before the first stream + * has received its final parameters, then the second stream may + * be constrained to the wrong sample rate or size. + * + * FIXME: This code does not handle opening and closing streams + * repeatedly. If you open two streams and then close the first + * one, you may not be able to open another stream until you + * close the second one as well. + */ + struct snd_pcm_runtime *first_runtime = + ssi_private->first_stream->runtime; + + if (!first_runtime->rate || !first_runtime->sample_bits) { + dev_err(substream->pcm->card->dev, + "set sample rate and size in %s stream first\n", + substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? "capture" : "playback"); + return -EAGAIN; + } + + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, + first_runtime->rate, first_runtime->rate); + + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_SAMPLE_BITS, + first_runtime->sample_bits, + first_runtime->sample_bits); + + ssi_private->second_stream = substream; + } + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ssi_private->playback++; @@ -371,18 +418,16 @@ static int fsl_ssi_prepare(struct snd_pcm_substream *substream) struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data; struct ccsr_ssi __iomem *ssi = ssi_private->ssi; - u32 wl; - wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format)); + if (substream == ssi_private->first_stream) { + u32 wl; - clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + /* The SSI should always be disabled at this points (SSIEN=0) */ + wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format)); - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + /* In synchronous mode, the SSI uses STCCR for capture */ clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl); - else - clrsetbits_be32(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl); - - setbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + } return 0; } @@ -407,9 +452,13 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - setbits32(&ssi->scr, CCSR_SSI_SCR_TE); + clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + setbits32(&ssi->scr, + CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE); } else { - setbits32(&ssi->scr, CCSR_SSI_SCR_RE); + clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + setbits32(&ssi->scr, + CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE); /* * I think we need this delay to allow time for the SSI @@ -452,6 +501,11 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream) if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) ssi_private->capture--; + if (ssi_private->first_stream == substream) + ssi_private->first_stream = ssi_private->second_stream; + + ssi_private->second_stream = NULL; + /* * If this is the last active substream, disable the SSI and release * the IRQ. -- GitLab From 877db3c1af24a65f78ae865b1fb642165e065a8b Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 29 Jul 2008 11:42:22 +0100 Subject: [PATCH 0217/1024] ALSA: ASoC: Update Poodle to current ASoC API Signed-off-by: Dmitry Baryshkov Cc: Richard Purdie Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/pxa/poodle.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index 65a4e9a8c39..d968cf71b56 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -85,17 +85,13 @@ static int poodle_startup(struct snd_pcm_substream *substream) } /* we need to unmute the HP at shutdown as the mute burns power on poodle */ -static int poodle_shutdown(struct snd_pcm_substream *substream) +static void poodle_shutdown(struct snd_pcm_substream *substream) { - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_codec *codec = rtd->socdev->codec; - /* set = unmute headphone */ locomo_gpio_write(&poodle_locomo_device.dev, POODLE_LOCOMO_GPIO_MUTE_L, 1); locomo_gpio_write(&poodle_locomo_device.dev, POODLE_LOCOMO_GPIO_MUTE_R, 1); - return 0; } static int poodle_hw_params(struct snd_pcm_substream *substream, @@ -232,7 +228,7 @@ static const struct soc_enum poodle_enum[] = { SOC_ENUM_SINGLE_EXT(2, spk_function), }; -static const snd_kcontrol_new_t wm8731_poodle_controls[] = { +static const struct snd_kcontrol_new wm8731_poodle_controls[] = { SOC_ENUM_EXT("Jack Function", poodle_enum[0], poodle_get_jack, poodle_set_jack), SOC_ENUM_EXT("Speaker Function", poodle_enum[1], poodle_get_spk, -- GitLab From f42b7e3dbe1e2c004a47aa89f09137ee5f04499d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 20:12:51 +0900 Subject: [PATCH 0218/1024] sh: Add ARCH_DEFCONFIG entries for sh and sh64. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 7bfb0d219d6..81eaa4b72f4 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -23,6 +23,11 @@ config SUPERH32 config SUPERH64 def_bool y if CPU_SH5 +config ARCH_DEFCONFIG + string + default "arch/sh/configs/shx3_defconfig" if SUPERH32 + default "arch/sh/configs/cayman_defconfig" if SUPERH64 + config RWSEM_GENERIC_SPINLOCK def_bool y -- GitLab From cfb81f361a3e73bb4eb7207a88f720e2f652dd63 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 20:19:43 +0900 Subject: [PATCH 0219/1024] sh: Switch KBUILD_DEFCONFIG to shx3_defconfig. Signed-off-by: Paul Mundt --- arch/sh/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/Makefile b/arch/sh/Makefile index fbf87562831..f2b07b54c91 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -68,7 +68,7 @@ OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \ defaultimage-$(CONFIG_SUPERH32) := zImage # Set some sensible Kbuild defaults -KBUILD_DEFCONFIG := r7780mp_defconfig +KBUILD_DEFCONFIG := shx3_defconfig KBUILD_IMAGE := $(defaultimage-y) # -- GitLab From 71b8064e7df5698520d73b4c1566a3dbc98eb9ef Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 20:20:36 +0900 Subject: [PATCH 0220/1024] sh: dma-sh: Fix up dreamcast dma.h mach path. Signed-off-by: Paul Mundt --- arch/sh/drivers/dma/dma-sh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index bd305483c14..b2ffe649c7c 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include #include #include "dma-sh.h" -- GitLab From da2014a2b080e7f3024a4eb6917d47069ad9620b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 21:01:19 +0900 Subject: [PATCH 0221/1024] sh: Shuffle the board directories in to mach groups. This flattens out the board directories in to individual mach groups, we will use this for getting rid of unneeded directories, simplifying the build system, and becoming more coherent with the refactored arch/sh/include topology. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 10 ++-- arch/sh/Makefile | 60 +++++++++---------- .../ap325rxa => mach-ap325rxa}/Makefile | 0 .../ap325rxa => mach-ap325rxa}/setup.c | 0 .../boards/{cayman => mach-cayman}/Makefile | 0 arch/sh/boards/{cayman => mach-cayman}/irq.c | 0 arch/sh/boards/{cayman => mach-cayman}/led.c | 0 .../sh/boards/{cayman => mach-cayman}/setup.c | 0 .../{dreamcast => mach-dreamcast}/Makefile | 0 .../{dreamcast => mach-dreamcast}/irq.c | 0 .../{dreamcast => mach-dreamcast}/rtc.c | 0 .../{dreamcast => mach-dreamcast}/setup.c | 0 .../edosk7705 => mach-edosk7705}/Makefile | 0 .../edosk7705 => mach-edosk7705}/io.c | 0 .../edosk7705 => mach-edosk7705}/setup.c | 0 .../r7780rp => mach-highlander}/Kconfig | 0 .../r7780rp => mach-highlander}/Makefile | 0 .../r7780rp => mach-highlander}/irq-r7780mp.c | 0 .../r7780rp => mach-highlander}/irq-r7780rp.c | 0 .../r7780rp => mach-highlander}/irq-r7785rp.c | 0 .../r7780rp => mach-highlander}/psw.c | 0 .../r7780rp => mach-highlander}/setup.c | 0 arch/sh/boards/{hp6xx => mach-hp6xx}/Makefile | 0 .../boards/{hp6xx => mach-hp6xx}/hp6xx_apm.c | 0 arch/sh/boards/{hp6xx => mach-hp6xx}/pm.c | 0 .../boards/{hp6xx => mach-hp6xx}/pm_wakeup.S | 0 arch/sh/boards/{hp6xx => mach-hp6xx}/setup.c | 0 .../boards/{landisk => mach-landisk}/Makefile | 0 .../sh/boards/{landisk => mach-landisk}/gio.c | 0 .../sh/boards/{landisk => mach-landisk}/irq.c | 0 .../sh/boards/{landisk => mach-landisk}/psw.c | 0 .../boards/{landisk => mach-landisk}/setup.c | 0 .../boards/{lboxre2 => mach-lboxre2}/Makefile | 0 .../sh/boards/{lboxre2 => mach-lboxre2}/irq.c | 0 .../boards/{lboxre2 => mach-lboxre2}/setup.c | 0 .../Kconfig | 0 .../Makefile | 0 .../setup.c | 0 .../microdev => mach-microdev}/Makefile | 0 .../{superh/microdev => mach-microdev}/io.c | 0 .../{superh/microdev => mach-microdev}/irq.c | 0 .../{superh/microdev => mach-microdev}/led.c | 0 .../microdev => mach-microdev}/setup.c | 0 .../{renesas/migor => mach-migor}/Kconfig | 0 .../{renesas/migor => mach-migor}/Makefile | 0 .../{renesas/migor => mach-migor}/lcd_qvga.c | 0 .../{renesas/migor => mach-migor}/setup.c | 0 .../{renesas/rts7751r2d => mach-r2d}/Kconfig | 0 .../{renesas/rts7751r2d => mach-r2d}/Makefile | 0 .../{renesas/rts7751r2d => mach-r2d}/irq.c | 0 .../{renesas/rts7751r2d => mach-r2d}/setup.c | 0 .../rsk7203 => mach-rsk7203}/Makefile | 0 .../{renesas/rsk7203 => mach-rsk7203}/setup.c | 0 .../{renesas/sdk7780 => mach-sdk7780}/Kconfig | 0 .../sdk7780 => mach-sdk7780}/Makefile | 0 .../{renesas/sdk7780 => mach-sdk7780}/irq.c | 0 .../{renesas/sdk7780 => mach-sdk7780}/setup.c | 0 arch/sh/boards/{se => mach-se}/7206/Makefile | 0 arch/sh/boards/{se => mach-se}/7206/io.c | 0 arch/sh/boards/{se => mach-se}/7206/irq.c | 0 arch/sh/boards/{se => mach-se}/7206/setup.c | 0 arch/sh/boards/{se => mach-se}/7343/Makefile | 0 arch/sh/boards/{se => mach-se}/7343/io.c | 0 arch/sh/boards/{se => mach-se}/7343/irq.c | 0 arch/sh/boards/{se => mach-se}/7343/setup.c | 0 arch/sh/boards/{se => mach-se}/7619/Makefile | 0 arch/sh/boards/{se => mach-se}/7619/setup.c | 0 arch/sh/boards/{se => mach-se}/770x/Makefile | 0 arch/sh/boards/{se => mach-se}/770x/io.c | 0 arch/sh/boards/{se => mach-se}/770x/irq.c | 0 arch/sh/boards/{se => mach-se}/770x/setup.c | 0 arch/sh/boards/{se => mach-se}/7721/Makefile | 0 arch/sh/boards/{se => mach-se}/7721/irq.c | 0 arch/sh/boards/{se => mach-se}/7721/setup.c | 0 arch/sh/boards/{se => mach-se}/7722/Makefile | 0 arch/sh/boards/{se => mach-se}/7722/irq.c | 0 arch/sh/boards/{se => mach-se}/7722/setup.c | 0 arch/sh/boards/{se => mach-se}/7751/Makefile | 0 arch/sh/boards/{se => mach-se}/7751/io.c | 0 arch/sh/boards/{se => mach-se}/7751/irq.c | 0 arch/sh/boards/{se => mach-se}/7751/pci.c | 0 arch/sh/boards/{se => mach-se}/7751/setup.c | 0 arch/sh/boards/{se => mach-se}/7780/Makefile | 0 arch/sh/boards/{se => mach-se}/7780/irq.c | 0 arch/sh/boards/{se => mach-se}/7780/setup.c | 0 arch/sh/boards/{sh03 => mach-sh03}/Makefile | 0 arch/sh/boards/{sh03 => mach-sh03}/rtc.c | 0 arch/sh/boards/{sh03 => mach-sh03}/setup.c | 0 .../sh7763rdp => mach-sh7763rdp}/Makefile | 0 .../sh7763rdp => mach-sh7763rdp}/irq.c | 0 .../sh7763rdp => mach-sh7763rdp}/setup.c | 0 .../sh7785lcr => mach-sh7785lcr}/Makefile | 0 .../sh7785lcr => mach-sh7785lcr}/setup.c | 0 arch/sh/boards/{shmin => mach-shmin}/Makefile | 0 arch/sh/boards/{shmin => mach-shmin}/setup.c | 0 .../{snapgear => mach-snapgear}/Makefile | 0 .../boards/{snapgear => mach-snapgear}/io.c | 0 .../{snapgear => mach-snapgear}/setup.c | 0 .../systemh => mach-systemh}/Makefile | 0 .../{renesas/systemh => mach-systemh}/io.c | 0 .../{renesas/systemh => mach-systemh}/irq.c | 0 .../{renesas/systemh => mach-systemh}/setup.c | 0 arch/sh/boards/{titan => mach-titan}/Makefile | 0 arch/sh/boards/{titan => mach-titan}/io.c | 0 arch/sh/boards/{titan => mach-titan}/setup.c | 0 .../x3proto => mach-x3proto}/Makefile | 0 .../{renesas/x3proto => mach-x3proto}/ilsel.c | 0 .../{renesas/x3proto => mach-x3proto}/setup.c | 0 108 files changed, 35 insertions(+), 35 deletions(-) rename arch/sh/boards/{renesas/ap325rxa => mach-ap325rxa}/Makefile (100%) rename arch/sh/boards/{renesas/ap325rxa => mach-ap325rxa}/setup.c (100%) rename arch/sh/boards/{cayman => mach-cayman}/Makefile (100%) rename arch/sh/boards/{cayman => mach-cayman}/irq.c (100%) rename arch/sh/boards/{cayman => mach-cayman}/led.c (100%) rename arch/sh/boards/{cayman => mach-cayman}/setup.c (100%) rename arch/sh/boards/{dreamcast => mach-dreamcast}/Makefile (100%) rename arch/sh/boards/{dreamcast => mach-dreamcast}/irq.c (100%) rename arch/sh/boards/{dreamcast => mach-dreamcast}/rtc.c (100%) rename arch/sh/boards/{dreamcast => mach-dreamcast}/setup.c (100%) rename arch/sh/boards/{renesas/edosk7705 => mach-edosk7705}/Makefile (100%) rename arch/sh/boards/{renesas/edosk7705 => mach-edosk7705}/io.c (100%) rename arch/sh/boards/{renesas/edosk7705 => mach-edosk7705}/setup.c (100%) rename arch/sh/boards/{renesas/r7780rp => mach-highlander}/Kconfig (100%) rename arch/sh/boards/{renesas/r7780rp => mach-highlander}/Makefile (100%) rename arch/sh/boards/{renesas/r7780rp => mach-highlander}/irq-r7780mp.c (100%) rename arch/sh/boards/{renesas/r7780rp => mach-highlander}/irq-r7780rp.c (100%) rename arch/sh/boards/{renesas/r7780rp => mach-highlander}/irq-r7785rp.c (100%) rename arch/sh/boards/{renesas/r7780rp => mach-highlander}/psw.c (100%) rename arch/sh/boards/{renesas/r7780rp => mach-highlander}/setup.c (100%) rename arch/sh/boards/{hp6xx => mach-hp6xx}/Makefile (100%) rename arch/sh/boards/{hp6xx => mach-hp6xx}/hp6xx_apm.c (100%) rename arch/sh/boards/{hp6xx => mach-hp6xx}/pm.c (100%) rename arch/sh/boards/{hp6xx => mach-hp6xx}/pm_wakeup.S (100%) rename arch/sh/boards/{hp6xx => mach-hp6xx}/setup.c (100%) rename arch/sh/boards/{landisk => mach-landisk}/Makefile (100%) rename arch/sh/boards/{landisk => mach-landisk}/gio.c (100%) rename arch/sh/boards/{landisk => mach-landisk}/irq.c (100%) rename arch/sh/boards/{landisk => mach-landisk}/psw.c (100%) rename arch/sh/boards/{landisk => mach-landisk}/setup.c (100%) rename arch/sh/boards/{lboxre2 => mach-lboxre2}/Makefile (100%) rename arch/sh/boards/{lboxre2 => mach-lboxre2}/irq.c (100%) rename arch/sh/boards/{lboxre2 => mach-lboxre2}/setup.c (100%) rename arch/sh/boards/{magicpanelr2 => mach-magicpanelr2}/Kconfig (100%) rename arch/sh/boards/{magicpanelr2 => mach-magicpanelr2}/Makefile (100%) rename arch/sh/boards/{magicpanelr2 => mach-magicpanelr2}/setup.c (100%) rename arch/sh/boards/{superh/microdev => mach-microdev}/Makefile (100%) rename arch/sh/boards/{superh/microdev => mach-microdev}/io.c (100%) rename arch/sh/boards/{superh/microdev => mach-microdev}/irq.c (100%) rename arch/sh/boards/{superh/microdev => mach-microdev}/led.c (100%) rename arch/sh/boards/{superh/microdev => mach-microdev}/setup.c (100%) rename arch/sh/boards/{renesas/migor => mach-migor}/Kconfig (100%) rename arch/sh/boards/{renesas/migor => mach-migor}/Makefile (100%) rename arch/sh/boards/{renesas/migor => mach-migor}/lcd_qvga.c (100%) rename arch/sh/boards/{renesas/migor => mach-migor}/setup.c (100%) rename arch/sh/boards/{renesas/rts7751r2d => mach-r2d}/Kconfig (100%) rename arch/sh/boards/{renesas/rts7751r2d => mach-r2d}/Makefile (100%) rename arch/sh/boards/{renesas/rts7751r2d => mach-r2d}/irq.c (100%) rename arch/sh/boards/{renesas/rts7751r2d => mach-r2d}/setup.c (100%) rename arch/sh/boards/{renesas/rsk7203 => mach-rsk7203}/Makefile (100%) rename arch/sh/boards/{renesas/rsk7203 => mach-rsk7203}/setup.c (100%) rename arch/sh/boards/{renesas/sdk7780 => mach-sdk7780}/Kconfig (100%) rename arch/sh/boards/{renesas/sdk7780 => mach-sdk7780}/Makefile (100%) rename arch/sh/boards/{renesas/sdk7780 => mach-sdk7780}/irq.c (100%) rename arch/sh/boards/{renesas/sdk7780 => mach-sdk7780}/setup.c (100%) rename arch/sh/boards/{se => mach-se}/7206/Makefile (100%) rename arch/sh/boards/{se => mach-se}/7206/io.c (100%) rename arch/sh/boards/{se => mach-se}/7206/irq.c (100%) rename arch/sh/boards/{se => mach-se}/7206/setup.c (100%) rename arch/sh/boards/{se => mach-se}/7343/Makefile (100%) rename arch/sh/boards/{se => mach-se}/7343/io.c (100%) rename arch/sh/boards/{se => mach-se}/7343/irq.c (100%) rename arch/sh/boards/{se => mach-se}/7343/setup.c (100%) rename arch/sh/boards/{se => mach-se}/7619/Makefile (100%) rename arch/sh/boards/{se => mach-se}/7619/setup.c (100%) rename arch/sh/boards/{se => mach-se}/770x/Makefile (100%) rename arch/sh/boards/{se => mach-se}/770x/io.c (100%) rename arch/sh/boards/{se => mach-se}/770x/irq.c (100%) rename arch/sh/boards/{se => mach-se}/770x/setup.c (100%) rename arch/sh/boards/{se => mach-se}/7721/Makefile (100%) rename arch/sh/boards/{se => mach-se}/7721/irq.c (100%) rename arch/sh/boards/{se => mach-se}/7721/setup.c (100%) rename arch/sh/boards/{se => mach-se}/7722/Makefile (100%) rename arch/sh/boards/{se => mach-se}/7722/irq.c (100%) rename arch/sh/boards/{se => mach-se}/7722/setup.c (100%) rename arch/sh/boards/{se => mach-se}/7751/Makefile (100%) rename arch/sh/boards/{se => mach-se}/7751/io.c (100%) rename arch/sh/boards/{se => mach-se}/7751/irq.c (100%) rename arch/sh/boards/{se => mach-se}/7751/pci.c (100%) rename arch/sh/boards/{se => mach-se}/7751/setup.c (100%) rename arch/sh/boards/{se => mach-se}/7780/Makefile (100%) rename arch/sh/boards/{se => mach-se}/7780/irq.c (100%) rename arch/sh/boards/{se => mach-se}/7780/setup.c (100%) rename arch/sh/boards/{sh03 => mach-sh03}/Makefile (100%) rename arch/sh/boards/{sh03 => mach-sh03}/rtc.c (100%) rename arch/sh/boards/{sh03 => mach-sh03}/setup.c (100%) rename arch/sh/boards/{renesas/sh7763rdp => mach-sh7763rdp}/Makefile (100%) rename arch/sh/boards/{renesas/sh7763rdp => mach-sh7763rdp}/irq.c (100%) rename arch/sh/boards/{renesas/sh7763rdp => mach-sh7763rdp}/setup.c (100%) rename arch/sh/boards/{renesas/sh7785lcr => mach-sh7785lcr}/Makefile (100%) rename arch/sh/boards/{renesas/sh7785lcr => mach-sh7785lcr}/setup.c (100%) rename arch/sh/boards/{shmin => mach-shmin}/Makefile (100%) rename arch/sh/boards/{shmin => mach-shmin}/setup.c (100%) rename arch/sh/boards/{snapgear => mach-snapgear}/Makefile (100%) rename arch/sh/boards/{snapgear => mach-snapgear}/io.c (100%) rename arch/sh/boards/{snapgear => mach-snapgear}/setup.c (100%) rename arch/sh/boards/{renesas/systemh => mach-systemh}/Makefile (100%) rename arch/sh/boards/{renesas/systemh => mach-systemh}/io.c (100%) rename arch/sh/boards/{renesas/systemh => mach-systemh}/irq.c (100%) rename arch/sh/boards/{renesas/systemh => mach-systemh}/setup.c (100%) rename arch/sh/boards/{titan => mach-titan}/Makefile (100%) rename arch/sh/boards/{titan => mach-titan}/io.c (100%) rename arch/sh/boards/{titan => mach-titan}/setup.c (100%) rename arch/sh/boards/{renesas/x3proto => mach-x3proto}/Makefile (100%) rename arch/sh/boards/{renesas/x3proto => mach-x3proto}/ilsel.c (100%) rename arch/sh/boards/{renesas/x3proto => mach-x3proto}/setup.c (100%) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 81eaa4b72f4..83d170ccb0f 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -594,11 +594,11 @@ config SH_CAYMAN endmenu -source "arch/sh/boards/renesas/rts7751r2d/Kconfig" -source "arch/sh/boards/renesas/r7780rp/Kconfig" -source "arch/sh/boards/renesas/sdk7780/Kconfig" -source "arch/sh/boards/renesas/migor/Kconfig" -source "arch/sh/boards/magicpanelr2/Kconfig" +source "arch/sh/boards/mach-r2d/Kconfig" +source "arch/sh/boards/mach-highlander/Kconfig" +source "arch/sh/boards/mach-sdk7780/Kconfig" +source "arch/sh/boards/mach-migor/Kconfig" +source "arch/sh/boards/mach-magicpanelr2/Kconfig" menu "Timer and clock configuration" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index f2b07b54c91..47bbfd8ae66 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -102,36 +102,36 @@ core-y += arch/sh/kernel/ arch/sh/mm/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ # Boards -machdir-$(CONFIG_SH_SOLUTION_ENGINE) += se/770x -machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722 -machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751 -machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780 -machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343 -machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721 -machdir-$(CONFIG_SH_HP6XX) += hp6xx -machdir-$(CONFIG_SH_DREAMCAST) += dreamcast -machdir-$(CONFIG_SH_SH03) += sh03 -machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear -machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d -machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh -machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705 -machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp -machdir-$(CONFIG_SH_MIGOR) += renesas/migor -machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 -machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto -machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203 -machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa -machdir-$(CONFIG_SH_SH7763RDP) += renesas/sh7763rdp -machdir-$(CONFIG_SH_SH7785LCR) += renesas/sh7785lcr -machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev -machdir-$(CONFIG_SH_LANDISK) += landisk -machdir-$(CONFIG_SH_TITAN) += titan -machdir-$(CONFIG_SH_SHMIN) += shmin -machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206 -machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619 -machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2 -machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += magicpanelr2 -machdir-$(CONFIG_SH_CAYMAN) += cayman +machdir-$(CONFIG_SH_SOLUTION_ENGINE) += mach-se/770x +machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += mach-se/7206 +machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += mach-se/7619 +machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += mach-se/7722 +machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += mach-se/7751 +machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += mach-se/7780 +machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += mach-se/7343 +machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += mach-se/7721 +machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx +machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast +machdir-$(CONFIG_SH_SH03) += mach-sh03 +machdir-$(CONFIG_SH_SECUREEDGE5410) += mach-snapgear +machdir-$(CONFIG_SH_RTS7751R2D) += mach-r2d +machdir-$(CONFIG_SH_7751_SYSTEMH) += mach-systemh +machdir-$(CONFIG_SH_EDOSK7705) += mach-edosk7705 +machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander +machdir-$(CONFIG_SH_MIGOR) += mach-migor +machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780 +machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto +machdir-$(CONFIG_SH_RSK7203) += mach-rsk7203 +machdir-$(CONFIG_SH_AP325RXA) += mach-ap325rxa +machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp +machdir-$(CONFIG_SH_SH7785LCR) += mach-sh7785lcr +machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev +machdir-$(CONFIG_SH_LANDISK) += mach-landisk +machdir-$(CONFIG_SH_TITAN) += mach-titan +machdir-$(CONFIG_SH_SHMIN) += mach-shmin +machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2 +machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += mach-magicpanelr2 +machdir-$(CONFIG_SH_CAYMAN) += mach-cayman incdir-y := $(notdir $(machdir-y)) diff --git a/arch/sh/boards/renesas/ap325rxa/Makefile b/arch/sh/boards/mach-ap325rxa/Makefile similarity index 100% rename from arch/sh/boards/renesas/ap325rxa/Makefile rename to arch/sh/boards/mach-ap325rxa/Makefile diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c similarity index 100% rename from arch/sh/boards/renesas/ap325rxa/setup.c rename to arch/sh/boards/mach-ap325rxa/setup.c diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile similarity index 100% rename from arch/sh/boards/cayman/Makefile rename to arch/sh/boards/mach-cayman/Makefile diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c similarity index 100% rename from arch/sh/boards/cayman/irq.c rename to arch/sh/boards/mach-cayman/irq.c diff --git a/arch/sh/boards/cayman/led.c b/arch/sh/boards/mach-cayman/led.c similarity index 100% rename from arch/sh/boards/cayman/led.c rename to arch/sh/boards/mach-cayman/led.c diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c similarity index 100% rename from arch/sh/boards/cayman/setup.c rename to arch/sh/boards/mach-cayman/setup.c diff --git a/arch/sh/boards/dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile similarity index 100% rename from arch/sh/boards/dreamcast/Makefile rename to arch/sh/boards/mach-dreamcast/Makefile diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c similarity index 100% rename from arch/sh/boards/dreamcast/irq.c rename to arch/sh/boards/mach-dreamcast/irq.c diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c similarity index 100% rename from arch/sh/boards/dreamcast/rtc.c rename to arch/sh/boards/mach-dreamcast/rtc.c diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c similarity index 100% rename from arch/sh/boards/dreamcast/setup.c rename to arch/sh/boards/mach-dreamcast/setup.c diff --git a/arch/sh/boards/renesas/edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile similarity index 100% rename from arch/sh/boards/renesas/edosk7705/Makefile rename to arch/sh/boards/mach-edosk7705/Makefile diff --git a/arch/sh/boards/renesas/edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c similarity index 100% rename from arch/sh/boards/renesas/edosk7705/io.c rename to arch/sh/boards/mach-edosk7705/io.c diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c similarity index 100% rename from arch/sh/boards/renesas/edosk7705/setup.c rename to arch/sh/boards/mach-edosk7705/setup.c diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/mach-highlander/Kconfig similarity index 100% rename from arch/sh/boards/renesas/r7780rp/Kconfig rename to arch/sh/boards/mach-highlander/Kconfig diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/mach-highlander/Makefile similarity index 100% rename from arch/sh/boards/renesas/r7780rp/Makefile rename to arch/sh/boards/mach-highlander/Makefile diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c similarity index 100% rename from arch/sh/boards/renesas/r7780rp/irq-r7780mp.c rename to arch/sh/boards/mach-highlander/irq-r7780mp.c diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c similarity index 100% rename from arch/sh/boards/renesas/r7780rp/irq-r7780rp.c rename to arch/sh/boards/mach-highlander/irq-r7780rp.c diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c similarity index 100% rename from arch/sh/boards/renesas/r7780rp/irq-r7785rp.c rename to arch/sh/boards/mach-highlander/irq-r7785rp.c diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/mach-highlander/psw.c similarity index 100% rename from arch/sh/boards/renesas/r7780rp/psw.c rename to arch/sh/boards/mach-highlander/psw.c diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/mach-highlander/setup.c similarity index 100% rename from arch/sh/boards/renesas/r7780rp/setup.c rename to arch/sh/boards/mach-highlander/setup.c diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile similarity index 100% rename from arch/sh/boards/hp6xx/Makefile rename to arch/sh/boards/mach-hp6xx/Makefile diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c similarity index 100% rename from arch/sh/boards/hp6xx/hp6xx_apm.c rename to arch/sh/boards/mach-hp6xx/hp6xx_apm.c diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c similarity index 100% rename from arch/sh/boards/hp6xx/pm.c rename to arch/sh/boards/mach-hp6xx/pm.c diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S similarity index 100% rename from arch/sh/boards/hp6xx/pm_wakeup.S rename to arch/sh/boards/mach-hp6xx/pm_wakeup.S diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c similarity index 100% rename from arch/sh/boards/hp6xx/setup.c rename to arch/sh/boards/mach-hp6xx/setup.c diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile similarity index 100% rename from arch/sh/boards/landisk/Makefile rename to arch/sh/boards/mach-landisk/Makefile diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c similarity index 100% rename from arch/sh/boards/landisk/gio.c rename to arch/sh/boards/mach-landisk/gio.c diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c similarity index 100% rename from arch/sh/boards/landisk/irq.c rename to arch/sh/boards/mach-landisk/irq.c diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c similarity index 100% rename from arch/sh/boards/landisk/psw.c rename to arch/sh/boards/mach-landisk/psw.c diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c similarity index 100% rename from arch/sh/boards/landisk/setup.c rename to arch/sh/boards/mach-landisk/setup.c diff --git a/arch/sh/boards/lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile similarity index 100% rename from arch/sh/boards/lboxre2/Makefile rename to arch/sh/boards/mach-lboxre2/Makefile diff --git a/arch/sh/boards/lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c similarity index 100% rename from arch/sh/boards/lboxre2/irq.c rename to arch/sh/boards/mach-lboxre2/irq.c diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c similarity index 100% rename from arch/sh/boards/lboxre2/setup.c rename to arch/sh/boards/mach-lboxre2/setup.c diff --git a/arch/sh/boards/magicpanelr2/Kconfig b/arch/sh/boards/mach-magicpanelr2/Kconfig similarity index 100% rename from arch/sh/boards/magicpanelr2/Kconfig rename to arch/sh/boards/mach-magicpanelr2/Kconfig diff --git a/arch/sh/boards/magicpanelr2/Makefile b/arch/sh/boards/mach-magicpanelr2/Makefile similarity index 100% rename from arch/sh/boards/magicpanelr2/Makefile rename to arch/sh/boards/mach-magicpanelr2/Makefile diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/mach-magicpanelr2/setup.c similarity index 100% rename from arch/sh/boards/magicpanelr2/setup.c rename to arch/sh/boards/mach-magicpanelr2/setup.c diff --git a/arch/sh/boards/superh/microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile similarity index 100% rename from arch/sh/boards/superh/microdev/Makefile rename to arch/sh/boards/mach-microdev/Makefile diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/mach-microdev/io.c similarity index 100% rename from arch/sh/boards/superh/microdev/io.c rename to arch/sh/boards/mach-microdev/io.c diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c similarity index 100% rename from arch/sh/boards/superh/microdev/irq.c rename to arch/sh/boards/mach-microdev/irq.c diff --git a/arch/sh/boards/superh/microdev/led.c b/arch/sh/boards/mach-microdev/led.c similarity index 100% rename from arch/sh/boards/superh/microdev/led.c rename to arch/sh/boards/mach-microdev/led.c diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c similarity index 100% rename from arch/sh/boards/superh/microdev/setup.c rename to arch/sh/boards/mach-microdev/setup.c diff --git a/arch/sh/boards/renesas/migor/Kconfig b/arch/sh/boards/mach-migor/Kconfig similarity index 100% rename from arch/sh/boards/renesas/migor/Kconfig rename to arch/sh/boards/mach-migor/Kconfig diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/mach-migor/Makefile similarity index 100% rename from arch/sh/boards/renesas/migor/Makefile rename to arch/sh/boards/mach-migor/Makefile diff --git a/arch/sh/boards/renesas/migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c similarity index 100% rename from arch/sh/boards/renesas/migor/lcd_qvga.c rename to arch/sh/boards/mach-migor/lcd_qvga.c diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/mach-migor/setup.c similarity index 100% rename from arch/sh/boards/renesas/migor/setup.c rename to arch/sh/boards/mach-migor/setup.c diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/mach-r2d/Kconfig similarity index 100% rename from arch/sh/boards/renesas/rts7751r2d/Kconfig rename to arch/sh/boards/mach-r2d/Kconfig diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/mach-r2d/Makefile similarity index 100% rename from arch/sh/boards/renesas/rts7751r2d/Makefile rename to arch/sh/boards/mach-r2d/Makefile diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c similarity index 100% rename from arch/sh/boards/renesas/rts7751r2d/irq.c rename to arch/sh/boards/mach-r2d/irq.c diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c similarity index 100% rename from arch/sh/boards/renesas/rts7751r2d/setup.c rename to arch/sh/boards/mach-r2d/setup.c diff --git a/arch/sh/boards/renesas/rsk7203/Makefile b/arch/sh/boards/mach-rsk7203/Makefile similarity index 100% rename from arch/sh/boards/renesas/rsk7203/Makefile rename to arch/sh/boards/mach-rsk7203/Makefile diff --git a/arch/sh/boards/renesas/rsk7203/setup.c b/arch/sh/boards/mach-rsk7203/setup.c similarity index 100% rename from arch/sh/boards/renesas/rsk7203/setup.c rename to arch/sh/boards/mach-rsk7203/setup.c diff --git a/arch/sh/boards/renesas/sdk7780/Kconfig b/arch/sh/boards/mach-sdk7780/Kconfig similarity index 100% rename from arch/sh/boards/renesas/sdk7780/Kconfig rename to arch/sh/boards/mach-sdk7780/Kconfig diff --git a/arch/sh/boards/renesas/sdk7780/Makefile b/arch/sh/boards/mach-sdk7780/Makefile similarity index 100% rename from arch/sh/boards/renesas/sdk7780/Makefile rename to arch/sh/boards/mach-sdk7780/Makefile diff --git a/arch/sh/boards/renesas/sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c similarity index 100% rename from arch/sh/boards/renesas/sdk7780/irq.c rename to arch/sh/boards/mach-sdk7780/irq.c diff --git a/arch/sh/boards/renesas/sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c similarity index 100% rename from arch/sh/boards/renesas/sdk7780/setup.c rename to arch/sh/boards/mach-sdk7780/setup.c diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile similarity index 100% rename from arch/sh/boards/se/7206/Makefile rename to arch/sh/boards/mach-se/7206/Makefile diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c similarity index 100% rename from arch/sh/boards/se/7206/io.c rename to arch/sh/boards/mach-se/7206/io.c diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c similarity index 100% rename from arch/sh/boards/se/7206/irq.c rename to arch/sh/boards/mach-se/7206/irq.c diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c similarity index 100% rename from arch/sh/boards/se/7206/setup.c rename to arch/sh/boards/mach-se/7206/setup.c diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile similarity index 100% rename from arch/sh/boards/se/7343/Makefile rename to arch/sh/boards/mach-se/7343/Makefile diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/mach-se/7343/io.c similarity index 100% rename from arch/sh/boards/se/7343/io.c rename to arch/sh/boards/mach-se/7343/io.c diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c similarity index 100% rename from arch/sh/boards/se/7343/irq.c rename to arch/sh/boards/mach-se/7343/irq.c diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c similarity index 100% rename from arch/sh/boards/se/7343/setup.c rename to arch/sh/boards/mach-se/7343/setup.c diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/mach-se/7619/Makefile similarity index 100% rename from arch/sh/boards/se/7619/Makefile rename to arch/sh/boards/mach-se/7619/Makefile diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/mach-se/7619/setup.c similarity index 100% rename from arch/sh/boards/se/7619/setup.c rename to arch/sh/boards/mach-se/7619/setup.c diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile similarity index 100% rename from arch/sh/boards/se/770x/Makefile rename to arch/sh/boards/mach-se/770x/Makefile diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c similarity index 100% rename from arch/sh/boards/se/770x/io.c rename to arch/sh/boards/mach-se/770x/io.c diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c similarity index 100% rename from arch/sh/boards/se/770x/irq.c rename to arch/sh/boards/mach-se/770x/irq.c diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c similarity index 100% rename from arch/sh/boards/se/770x/setup.c rename to arch/sh/boards/mach-se/770x/setup.c diff --git a/arch/sh/boards/se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile similarity index 100% rename from arch/sh/boards/se/7721/Makefile rename to arch/sh/boards/mach-se/7721/Makefile diff --git a/arch/sh/boards/se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c similarity index 100% rename from arch/sh/boards/se/7721/irq.c rename to arch/sh/boards/mach-se/7721/irq.c diff --git a/arch/sh/boards/se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c similarity index 100% rename from arch/sh/boards/se/7721/setup.c rename to arch/sh/boards/mach-se/7721/setup.c diff --git a/arch/sh/boards/se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile similarity index 100% rename from arch/sh/boards/se/7722/Makefile rename to arch/sh/boards/mach-se/7722/Makefile diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c similarity index 100% rename from arch/sh/boards/se/7722/irq.c rename to arch/sh/boards/mach-se/7722/irq.c diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c similarity index 100% rename from arch/sh/boards/se/7722/setup.c rename to arch/sh/boards/mach-se/7722/setup.c diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile similarity index 100% rename from arch/sh/boards/se/7751/Makefile rename to arch/sh/boards/mach-se/7751/Makefile diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c similarity index 100% rename from arch/sh/boards/se/7751/io.c rename to arch/sh/boards/mach-se/7751/io.c diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c similarity index 100% rename from arch/sh/boards/se/7751/irq.c rename to arch/sh/boards/mach-se/7751/irq.c diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c similarity index 100% rename from arch/sh/boards/se/7751/pci.c rename to arch/sh/boards/mach-se/7751/pci.c diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c similarity index 100% rename from arch/sh/boards/se/7751/setup.c rename to arch/sh/boards/mach-se/7751/setup.c diff --git a/arch/sh/boards/se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile similarity index 100% rename from arch/sh/boards/se/7780/Makefile rename to arch/sh/boards/mach-se/7780/Makefile diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c similarity index 100% rename from arch/sh/boards/se/7780/irq.c rename to arch/sh/boards/mach-se/7780/irq.c diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c similarity index 100% rename from arch/sh/boards/se/7780/setup.c rename to arch/sh/boards/mach-se/7780/setup.c diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/mach-sh03/Makefile similarity index 100% rename from arch/sh/boards/sh03/Makefile rename to arch/sh/boards/mach-sh03/Makefile diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c similarity index 100% rename from arch/sh/boards/sh03/rtc.c rename to arch/sh/boards/mach-sh03/rtc.c diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c similarity index 100% rename from arch/sh/boards/sh03/setup.c rename to arch/sh/boards/mach-sh03/setup.c diff --git a/arch/sh/boards/renesas/sh7763rdp/Makefile b/arch/sh/boards/mach-sh7763rdp/Makefile similarity index 100% rename from arch/sh/boards/renesas/sh7763rdp/Makefile rename to arch/sh/boards/mach-sh7763rdp/Makefile diff --git a/arch/sh/boards/renesas/sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c similarity index 100% rename from arch/sh/boards/renesas/sh7763rdp/irq.c rename to arch/sh/boards/mach-sh7763rdp/irq.c diff --git a/arch/sh/boards/renesas/sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c similarity index 100% rename from arch/sh/boards/renesas/sh7763rdp/setup.c rename to arch/sh/boards/mach-sh7763rdp/setup.c diff --git a/arch/sh/boards/renesas/sh7785lcr/Makefile b/arch/sh/boards/mach-sh7785lcr/Makefile similarity index 100% rename from arch/sh/boards/renesas/sh7785lcr/Makefile rename to arch/sh/boards/mach-sh7785lcr/Makefile diff --git a/arch/sh/boards/renesas/sh7785lcr/setup.c b/arch/sh/boards/mach-sh7785lcr/setup.c similarity index 100% rename from arch/sh/boards/renesas/sh7785lcr/setup.c rename to arch/sh/boards/mach-sh7785lcr/setup.c diff --git a/arch/sh/boards/shmin/Makefile b/arch/sh/boards/mach-shmin/Makefile similarity index 100% rename from arch/sh/boards/shmin/Makefile rename to arch/sh/boards/mach-shmin/Makefile diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/mach-shmin/setup.c similarity index 100% rename from arch/sh/boards/shmin/setup.c rename to arch/sh/boards/mach-shmin/setup.c diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile similarity index 100% rename from arch/sh/boards/snapgear/Makefile rename to arch/sh/boards/mach-snapgear/Makefile diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c similarity index 100% rename from arch/sh/boards/snapgear/io.c rename to arch/sh/boards/mach-snapgear/io.c diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c similarity index 100% rename from arch/sh/boards/snapgear/setup.c rename to arch/sh/boards/mach-snapgear/setup.c diff --git a/arch/sh/boards/renesas/systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile similarity index 100% rename from arch/sh/boards/renesas/systemh/Makefile rename to arch/sh/boards/mach-systemh/Makefile diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/mach-systemh/io.c similarity index 100% rename from arch/sh/boards/renesas/systemh/io.c rename to arch/sh/boards/mach-systemh/io.c diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c similarity index 100% rename from arch/sh/boards/renesas/systemh/irq.c rename to arch/sh/boards/mach-systemh/irq.c diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c similarity index 100% rename from arch/sh/boards/renesas/systemh/setup.c rename to arch/sh/boards/mach-systemh/setup.c diff --git a/arch/sh/boards/titan/Makefile b/arch/sh/boards/mach-titan/Makefile similarity index 100% rename from arch/sh/boards/titan/Makefile rename to arch/sh/boards/mach-titan/Makefile diff --git a/arch/sh/boards/titan/io.c b/arch/sh/boards/mach-titan/io.c similarity index 100% rename from arch/sh/boards/titan/io.c rename to arch/sh/boards/mach-titan/io.c diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/mach-titan/setup.c similarity index 100% rename from arch/sh/boards/titan/setup.c rename to arch/sh/boards/mach-titan/setup.c diff --git a/arch/sh/boards/renesas/x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile similarity index 100% rename from arch/sh/boards/renesas/x3proto/Makefile rename to arch/sh/boards/mach-x3proto/Makefile diff --git a/arch/sh/boards/renesas/x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c similarity index 100% rename from arch/sh/boards/renesas/x3proto/ilsel.c rename to arch/sh/boards/mach-x3proto/ilsel.c diff --git a/arch/sh/boards/renesas/x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c similarity index 100% rename from arch/sh/boards/renesas/x3proto/setup.c rename to arch/sh/boards/mach-x3proto/setup.c -- GitLab From e565b518ec3a62aebf54da31c65bb6036bb5a276 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 29 Jul 2008 20:57:38 +0900 Subject: [PATCH 0222/1024] sh: I2C fix for AP325RXA and Migo-R Fix recently introduced I2C build breakage on AP325RXA and Migo-R. Reported-by: Adrian Bunk Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ap325rxa/setup.c | 4 ++++ arch/sh/boards/mach-migor/setup.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 7fa74462bd9..9c71603d29a 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -165,6 +165,7 @@ static struct platform_device lcdc_device = { }, }; +#ifdef CONFIG_I2C static unsigned char camera_ncm03j_magic[] = { 0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8, @@ -234,6 +235,7 @@ static struct platform_device camera_device = { .platform_data = &camera_info, }, }; +#endif /* CONFIG_I2C */ static struct sh_mobile_ceu_info sh_mobile_ceu_info = { .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | @@ -270,7 +272,9 @@ static struct platform_device *ap325rxa_devices[] __initdata = { &ap325rxa_nor_flash_device, &lcdc_device, &ceu_device, +#ifdef CONFIG_I2C &camera_device, +#endif }; static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 7bd365ad2d0..e499ee384d5 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -304,6 +304,7 @@ static void camera_power_off(void) ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR); } +#ifdef CONFIG_I2C static unsigned char camera_ov772x_magic[] = { 0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01, @@ -391,6 +392,7 @@ static struct platform_device migor_camera_device = { .platform_data = &ov772x_info, }, }; +#endif /* CONFIG_I2C */ static struct sh_mobile_ceu_info sh_mobile_ceu_info = { .flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \ @@ -429,7 +431,9 @@ static struct platform_device *migor_devices[] __initdata = { &sh_keysc_device, &migor_lcdc_device, &migor_ceu_device, +#ifdef CONFIG_I2C &migor_camera_device, +#endif &migor_nor_flash_device, &migor_nand_flash_device, }; -- GitLab From 939a24a6df24649cea9fd0ff54fe71ee0dc1d61e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 21:41:37 +0900 Subject: [PATCH 0223/1024] sh: Move out the solution engine headers to arch/sh/include/mach-se/ Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 247 +----------------- arch/sh/Makefile | 15 +- arch/sh/boards/Kconfig | 245 +++++++++++++++++ arch/sh/boards/mach-se/7206/io.c | 2 +- arch/sh/boards/mach-se/7206/irq.c | 2 +- arch/sh/boards/mach-se/7206/setup.c | 2 +- arch/sh/boards/mach-se/7343/irq.c | 6 +- arch/sh/boards/mach-se/7343/setup.c | 4 +- arch/sh/boards/mach-se/770x/io.c | 2 +- arch/sh/boards/mach-se/770x/irq.c | 2 +- arch/sh/boards/mach-se/770x/setup.c | 2 +- arch/sh/boards/mach-se/7721/irq.c | 2 +- arch/sh/boards/mach-se/7721/setup.c | 2 +- arch/sh/boards/mach-se/7722/irq.c | 2 +- arch/sh/boards/mach-se/7722/setup.c | 2 +- arch/sh/boards/mach-se/7751/io.c | 2 +- arch/sh/boards/mach-se/7751/irq.c | 2 +- arch/sh/boards/mach-se/7751/setup.c | 2 +- arch/sh/boards/mach-se/7780/irq.c | 2 +- arch/sh/boards/mach-se/7780/setup.c | 2 +- arch/sh/boards/mach-se/Makefile | 8 + arch/sh/drivers/pci/ops-se7780.c | 2 +- arch/sh/include/{asm => mach-se/mach}/se.h | 0 .../sh/include/{asm => mach-se/mach}/se7206.h | 0 .../sh/include/{asm => mach-se/mach}/se7343.h | 0 .../sh/include/{asm => mach-se/mach}/se7721.h | 0 .../sh/include/{asm => mach-se/mach}/se7722.h | 0 .../sh/include/{asm => mach-se/mach}/se7751.h | 0 .../sh/include/{asm => mach-se/mach}/se7780.h | 0 arch/sh/kernel/cf-enabler.c | 6 +- 30 files changed, 282 insertions(+), 281 deletions(-) create mode 100644 arch/sh/boards/Kconfig create mode 100644 arch/sh/boards/mach-se/Makefile rename arch/sh/include/{asm => mach-se/mach}/se.h (100%) rename arch/sh/include/{asm => mach-se/mach}/se7206.h (100%) rename arch/sh/include/{asm => mach-se/mach}/se7343.h (100%) rename arch/sh/include/{asm => mach-se/mach}/se7721.h (100%) rename arch/sh/include/{asm => mach-se/mach}/se7722.h (100%) rename arch/sh/include/{asm => mach-se/mach}/se7751.h (100%) rename arch/sh/include/{asm => mach-se/mach}/se7780.h (100%) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 83d170ccb0f..2b742206ba0 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -352,253 +352,10 @@ config CPU_SUBTYPE_SH5_103 endchoice source "arch/sh/mm/Kconfig" + source "arch/sh/Kconfig.cpu" -menu "Board support" - -config SOLUTION_ENGINE - bool - -config SH_SOLUTION_ENGINE - bool "SolutionEngine" - select SOLUTION_ENGINE - select CPU_HAS_IPR_IRQ - depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ - CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ - CPU_SUBTYPE_SH7750R - help - Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, - SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. - -config SH_7206_SOLUTION_ENGINE - bool "SolutionEngine7206" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7206 - help - Select 7206 SolutionEngine if configuring for a Hitachi SH7206 - evaluation board. - -config SH_7619_SOLUTION_ENGINE - bool "SolutionEngine7619" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7619 - help - Select 7619 SolutionEngine if configuring for a Hitachi SH7619 - evaluation board. - -config SH_7721_SOLUTION_ENGINE - bool "SolutionEngine7721" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7721 - help - Select 7721 SolutionEngine if configuring for a Hitachi SH7721 - evaluation board. - -config SH_7722_SOLUTION_ENGINE - bool "SolutionEngine7722" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7722 - help - Select 7722 SolutionEngine if configuring for a Hitachi SH772 - evaluation board. - -config SH_7751_SOLUTION_ENGINE - bool "SolutionEngine7751" - select SOLUTION_ENGINE - select CPU_HAS_IPR_IRQ - depends on CPU_SUBTYPE_SH7751 - help - Select 7751 SolutionEngine if configuring for a Hitachi SH7751 - evaluation board. - -config SH_7780_SOLUTION_ENGINE - bool "SolutionEngine7780" - select SOLUTION_ENGINE - select SYS_SUPPORTS_PCI - depends on CPU_SUBTYPE_SH7780 - help - Select 7780 SolutionEngine if configuring for a Renesas SH7780 - evaluation board. - -config SH_7343_SOLUTION_ENGINE - bool "SolutionEngine7343" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7343 - help - Select 7343 SolutionEngine if configuring for a Hitachi - SH7343 (SH-Mobile 3AS) evaluation board. - -config SH_7751_SYSTEMH - bool "SystemH7751R" - depends on CPU_SUBTYPE_SH7751R - help - Select SystemH if you are configuring for a Renesas SystemH - 7751R evaluation board. - -config SH_HP6XX - bool "HP6XX" - select SYS_SUPPORTS_APM_EMULATION - select HD6446X_SERIES - depends on CPU_SUBTYPE_SH7709 - help - Select HP6XX if configuring for a HP jornada HP6xx. - More information (hardware only) at - . - -config SH_DREAMCAST - bool "Dreamcast" - select SYS_SUPPORTS_PCI - depends on CPU_SUBTYPE_SH7091 - help - Select Dreamcast if configuring for a SEGA Dreamcast. - More information at - -config SH_SH03 - bool "Interface CTP/PCI-SH03" - depends on CPU_SUBTYPE_SH7751 - select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI - help - CTP/PCI-SH03 is a CPU module computer that is produced - by Interface Corporation. - More information at - -config SH_SECUREEDGE5410 - bool "SecureEdge5410" - depends on CPU_SUBTYPE_SH7751R - select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI - help - Select SecureEdge5410 if configuring for a SnapGear SH board. - This includes both the OEM SecureEdge products as well as the - SME product line. - -config SH_RTS7751R2D - bool "RTS7751R2D" - depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI - select IO_TRAPPED - help - Select RTS7751R2D if configuring for a Renesas Technology - Sales SH-Graphics board. - -config SH_RSK7203 - bool "RSK7203" - depends on CPU_SUBTYPE_SH7203 - -config SH_SDK7780 - bool "SDK7780R3" - depends on CPU_SUBTYPE_SH7780 - select SYS_SUPPORTS_PCI - help - Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 - evaluation board. - -config SH_HIGHLANDER - bool "Highlander" - depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 - select SYS_SUPPORTS_PCI - select IO_TRAPPED - -config SH_SH7785LCR - bool "SH7785LCR" - depends on CPU_SUBTYPE_SH7785 - select SYS_SUPPORTS_PCI - select IO_TRAPPED - -config SH_SH7785LCR_29BIT_PHYSMAPS - bool "SH7785LCR 29bit physmaps" - depends on SH_SH7785LCR - default y - help - This board has 2 physical memory maps. It can be changed with - DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, - you can access all on-board device in 29bit address mode. - -config SH_MIGOR - bool "Migo-R" - depends on CPU_SUBTYPE_SH7722 - help - Select Migo-R if configuring for the SH7722 Migo-R platform - by Renesas System Solutions Asia Pte. Ltd. - -config SH_AP325RXA - bool "AP-325RXA" - depends on CPU_SUBTYPE_SH7723 - help - Renesas "AP-325RXA" support. - Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" - -config SH_SH7763RDP - bool "SH7763RDP" - depends on CPU_SUBTYPE_SH7763 - help - Select SH7763RDP if configuring for a Renesas SH7763 - evaluation board. - -config SH_EDOSK7705 - bool "EDOSK7705" - depends on CPU_SUBTYPE_SH7705 - -config SH_SH4202_MICRODEV - bool "SH4-202 MicroDev" - depends on CPU_SUBTYPE_SH4_202 - help - Select SH4-202 MicroDev if configuring for a SuperH MicroDev board - with an SH4-202 CPU. - -config SH_LANDISK - bool "LANDISK" - depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI - help - I-O DATA DEVICE, INC. "LANDISK Series" support. - -config SH_TITAN - bool "TITAN" - depends on CPU_SUBTYPE_SH7751R - select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI - help - Select Titan if you are configuring for a Nimble Microsystems - NetEngine NP51R. - -config SH_SHMIN - bool "SHMIN" - depends on CPU_SUBTYPE_SH7706 - select CPU_HAS_IPR_IRQ - help - Select SHMIN if configuring for the SHMIN board. - -config SH_LBOX_RE2 - bool "L-BOX RE2" - depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI - help - Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. - -config SH_X3PROTO - bool "SH-X3 Prototype board" - depends on CPU_SUBTYPE_SHX3 - -config SH_MAGIC_PANEL_R2 - bool "Magic Panel R2" - depends on CPU_SUBTYPE_SH7720 - help - Select Magic Panel R2 if configuring for Magic Panel R2. - -config SH_CAYMAN - bool "Hitachi Cayman" - depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 - select SYS_SUPPORTS_PCI - -endmenu - -source "arch/sh/boards/mach-r2d/Kconfig" -source "arch/sh/boards/mach-highlander/Kconfig" -source "arch/sh/boards/mach-sdk7780/Kconfig" -source "arch/sh/boards/mach-migor/Kconfig" -source "arch/sh/boards/mach-magicpanelr2/Kconfig" +source "arch/sh/boards/Kconfig" menu "Timer and clock configuration" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 47bbfd8ae66..fb3b65ed291 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -101,15 +101,8 @@ LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) core-y += arch/sh/kernel/ arch/sh/mm/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ -# Boards -machdir-$(CONFIG_SH_SOLUTION_ENGINE) += mach-se/770x -machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += mach-se/7206 -machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += mach-se/7619 -machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += mach-se/7722 -machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += mach-se/7751 -machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += mach-se/7780 -machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += mach-se/7343 -machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += mach-se/7721 +# Boards and Mach groups +machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast machdir-$(CONFIG_SH_SH03) += mach-sh03 @@ -133,8 +126,6 @@ machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2 machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += mach-magicpanelr2 machdir-$(CONFIG_SH_CAYMAN) += mach-cayman -incdir-y := $(notdir $(machdir-y)) - ifneq ($(machdir-y),) core-y += $(addprefix arch/sh/boards/, \ $(filter-out ., $(patsubst %,%/,$(machdir-y)))) @@ -159,7 +150,7 @@ drivers-$(CONFIG_OPROFILE) += arch/sh/oprofile/ boot := arch/sh/boot cflags-y += -Iarch/sh/include/$(cpuincdir-y) -cflags-y += $(foreach d, $(incdir-y), -Iarch/sh/include/mach-$(d)) +cflags-y += $(foreach d, $(machdir-y), -Iarch/sh/include/$(d)) KBUILD_CFLAGS += -pipe $(cflags-y) KBUILD_CPPFLAGS += $(cflags-y) diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig new file mode 100644 index 00000000000..324c25ac95c --- /dev/null +++ b/arch/sh/boards/Kconfig @@ -0,0 +1,245 @@ +menu "Board support" + +config SOLUTION_ENGINE + bool + +config SH_SOLUTION_ENGINE + bool "SolutionEngine" + select SOLUTION_ENGINE + select CPU_HAS_IPR_IRQ + depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ + CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ + CPU_SUBTYPE_SH7750R + help + Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, + SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. + +config SH_7206_SOLUTION_ENGINE + bool "SolutionEngine7206" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7206 + help + Select 7206 SolutionEngine if configuring for a Hitachi SH7206 + evaluation board. + +config SH_7619_SOLUTION_ENGINE + bool "SolutionEngine7619" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7619 + help + Select 7619 SolutionEngine if configuring for a Hitachi SH7619 + evaluation board. + +config SH_7721_SOLUTION_ENGINE + bool "SolutionEngine7721" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7721 + help + Select 7721 SolutionEngine if configuring for a Hitachi SH7721 + evaluation board. + +config SH_7722_SOLUTION_ENGINE + bool "SolutionEngine7722" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7722 + help + Select 7722 SolutionEngine if configuring for a Hitachi SH772 + evaluation board. + +config SH_7751_SOLUTION_ENGINE + bool "SolutionEngine7751" + select SOLUTION_ENGINE + select CPU_HAS_IPR_IRQ + depends on CPU_SUBTYPE_SH7751 + help + Select 7751 SolutionEngine if configuring for a Hitachi SH7751 + evaluation board. + +config SH_7780_SOLUTION_ENGINE + bool "SolutionEngine7780" + select SOLUTION_ENGINE + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7780 + help + Select 7780 SolutionEngine if configuring for a Renesas SH7780 + evaluation board. + +config SH_7343_SOLUTION_ENGINE + bool "SolutionEngine7343" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7343 + help + Select 7343 SolutionEngine if configuring for a Hitachi + SH7343 (SH-Mobile 3AS) evaluation board. + +config SH_7751_SYSTEMH + bool "SystemH7751R" + depends on CPU_SUBTYPE_SH7751R + help + Select SystemH if you are configuring for a Renesas SystemH + 7751R evaluation board. + +config SH_HP6XX + bool "HP6XX" + select SYS_SUPPORTS_APM_EMULATION + select HD6446X_SERIES + depends on CPU_SUBTYPE_SH7709 + help + Select HP6XX if configuring for a HP jornada HP6xx. + More information (hardware only) at + . + +config SH_DREAMCAST + bool "Dreamcast" + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7091 + help + Select Dreamcast if configuring for a SEGA Dreamcast. + More information at + +config SH_SH03 + bool "Interface CTP/PCI-SH03" + depends on CPU_SUBTYPE_SH7751 + select CPU_HAS_IPR_IRQ + select SYS_SUPPORTS_PCI + help + CTP/PCI-SH03 is a CPU module computer that is produced + by Interface Corporation. + More information at + +config SH_SECUREEDGE5410 + bool "SecureEdge5410" + depends on CPU_SUBTYPE_SH7751R + select CPU_HAS_IPR_IRQ + select SYS_SUPPORTS_PCI + help + Select SecureEdge5410 if configuring for a SnapGear SH board. + This includes both the OEM SecureEdge products as well as the + SME product line. + +config SH_RTS7751R2D + bool "RTS7751R2D" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + select IO_TRAPPED + help + Select RTS7751R2D if configuring for a Renesas Technology + Sales SH-Graphics board. + +config SH_RSK7203 + bool "RSK7203" + depends on CPU_SUBTYPE_SH7203 + +config SH_SDK7780 + bool "SDK7780R3" + depends on CPU_SUBTYPE_SH7780 + select SYS_SUPPORTS_PCI + help + Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 + evaluation board. + +config SH_HIGHLANDER + bool "Highlander" + depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI + select IO_TRAPPED + +config SH_SH7785LCR + bool "SH7785LCR" + depends on CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI + select IO_TRAPPED + +config SH_SH7785LCR_29BIT_PHYSMAPS + bool "SH7785LCR 29bit physmaps" + depends on SH_SH7785LCR + default y + help + This board has 2 physical memory maps. It can be changed with + DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, + you can access all on-board device in 29bit address mode. + +config SH_MIGOR + bool "Migo-R" + depends on CPU_SUBTYPE_SH7722 + help + Select Migo-R if configuring for the SH7722 Migo-R platform + by Renesas System Solutions Asia Pte. Ltd. + +config SH_AP325RXA + bool "AP-325RXA" + depends on CPU_SUBTYPE_SH7723 + help + Renesas "AP-325RXA" support. + Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" + +config SH_SH7763RDP + bool "SH7763RDP" + depends on CPU_SUBTYPE_SH7763 + help + Select SH7763RDP if configuring for a Renesas SH7763 + evaluation board. + +config SH_EDOSK7705 + bool "EDOSK7705" + depends on CPU_SUBTYPE_SH7705 + +config SH_SH4202_MICRODEV + bool "SH4-202 MicroDev" + depends on CPU_SUBTYPE_SH4_202 + help + Select SH4-202 MicroDev if configuring for a SuperH MicroDev board + with an SH4-202 CPU. + +config SH_LANDISK + bool "LANDISK" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + help + I-O DATA DEVICE, INC. "LANDISK Series" support. + +config SH_TITAN + bool "TITAN" + depends on CPU_SUBTYPE_SH7751R + select CPU_HAS_IPR_IRQ + select SYS_SUPPORTS_PCI + help + Select Titan if you are configuring for a Nimble Microsystems + NetEngine NP51R. + +config SH_SHMIN + bool "SHMIN" + depends on CPU_SUBTYPE_SH7706 + select CPU_HAS_IPR_IRQ + help + Select SHMIN if configuring for the SHMIN board. + +config SH_LBOX_RE2 + bool "L-BOX RE2" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + help + Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. + +config SH_X3PROTO + bool "SH-X3 Prototype board" + depends on CPU_SUBTYPE_SHX3 + +config SH_MAGIC_PANEL_R2 + bool "Magic Panel R2" + depends on CPU_SUBTYPE_SH7720 + help + Select Magic Panel R2 if configuring for Magic Panel R2. + +config SH_CAYMAN + bool "Hitachi Cayman" + depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 + select SYS_SUPPORTS_PCI + +endmenu + +source "arch/sh/boards/mach-r2d/Kconfig" +source "arch/sh/boards/mach-highlander/Kconfig" +source "arch/sh/boards/mach-sdk7780/Kconfig" +source "arch/sh/boards/mach-migor/Kconfig" +source "arch/sh/boards/mach-magicpanelr2/Kconfig" diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c index 1308e618e04..9c3a33210d6 100644 --- a/arch/sh/boards/mach-se/7206/io.c +++ b/arch/sh/boards/mach-se/7206/io.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include static inline void delay(void) diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c index 9d5bfc77d0d..aef7f052851 100644 --- a/arch/sh/boards/mach-se/7206/irq.c +++ b/arch/sh/boards/mach-se/7206/irq.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #define INTSTS0 0x31800000 #define INTSTS1 0x31800002 diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c index 4fe84cc0840..f5466384972 100644 --- a/arch/sh/boards/mach-se/7206/setup.c +++ b/arch/sh/boards/mach-se/7206/setup.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c index 1112e86aa93..5d96e2eef82 100644 --- a/arch/sh/boards/mach-se/7343/irq.c +++ b/arch/sh/boards/mach-se/7343/irq.c @@ -13,9 +13,9 @@ #include #include #include -#include -#include -#include +#include +#include +#include static void disable_se7343_irq(unsigned int irq) { diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c index 59dc92e20f6..486f40bf927 100644 --- a/arch/sh/boards/mach-se/7343/setup.c +++ b/arch/sh/boards/mach-se/7343/setup.c @@ -1,8 +1,8 @@ #include #include #include -#include -#include +#include +#include #include #include #include diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c index b1ec085b867..28833c8786e 100644 --- a/arch/sh/boards/mach-se/770x/io.c +++ b/arch/sh/boards/mach-se/770x/io.c @@ -6,7 +6,7 @@ #include #include #include -#include +#include /* MS7750 requires special versions of in*, out* routines, since PC-like io ports are located at upper half byte of 16-bit word which diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c index cdb0807928a..ec1fea571b5 100644 --- a/arch/sh/boards/mach-se/770x/irq.c +++ b/arch/sh/boards/mach-se/770x/irq.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include static struct ipr_data ipr_irq_table[] = { /* diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c index 6c64d774da3..9123d9687bf 100644 --- a/arch/sh/boards/mach-se/770x/setup.c +++ b/arch/sh/boards/mach-se/770x/setup.c @@ -9,7 +9,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c index c4fdd622bf8..b417acc4dad 100644 --- a/arch/sh/boards/mach-se/7721/irq.c +++ b/arch/sh/boards/mach-se/7721/irq.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include enum { UNUSED = 0, diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c index 1be3e92752f..d3fc80ff4d8 100644 --- a/arch/sh/boards/mach-se/7721/setup.c +++ b/arch/sh/boards/mach-se/7721/setup.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c index 0b03f3f610b..02d21a3e2a8 100644 --- a/arch/sh/boards/mach-se/7722/irq.c +++ b/arch/sh/boards/mach-se/7722/irq.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include static void disable_se7722_irq(unsigned int irq) { diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c index 6e228ea5978..fe6f96517e1 100644 --- a/arch/sh/boards/mach-se/7722/setup.c +++ b/arch/sh/boards/mach-se/7722/setup.c @@ -17,7 +17,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c index e8d846cec89..6287ae57031 100644 --- a/arch/sh/boards/mach-se/7751/io.c +++ b/arch/sh/boards/mach-se/7751/io.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include static inline volatile u16 *port2adr(unsigned int port) diff --git a/arch/sh/boards/mach-se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c index c3d12590e5d..5c9847ea1e7 100644 --- a/arch/sh/boards/mach-se/7751/irq.c +++ b/arch/sh/boards/mach-se/7751/irq.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include static struct ipr_data ipr_irq_table[] = { { 13, 3, 3, 2 }, diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c index deefbfd9259..50572512e3e 100644 --- a/arch/sh/boards/mach-se/7751/setup.c +++ b/arch/sh/boards/mach-se/7751/setup.c @@ -11,7 +11,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c index 6bd70da6bb4..66ad292c9fc 100644 --- a/arch/sh/boards/mach-se/7780/irq.c +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include /* * Initialize IRQ setting diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c index 0f08ab3b2be..1d3a867e94e 100644 --- a/arch/sh/boards/mach-se/7780/setup.c +++ b/arch/sh/boards/mach-se/7780/setup.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile new file mode 100644 index 00000000000..ad2b38ef65d --- /dev/null +++ b/arch/sh/boards/mach-se/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_SH_SOLUTION_ENGINE) += 770x/ +obj-$(CONFIG_SH_7206_SOLUTION_ENGINE) += 7206/ +obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += 7619/ +obj-$(CONFIG_SH_7722_SOLUTION_ENGINE) += 7722/ +obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += 7751/ +obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/ +obj-$(CONFIG_SH_7343_SOLUTION_ENGINE) += 7343/ +obj-$(CONFIG_SH_7721_SOLUTION_ENGINE) += 7721/ diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index bbdb48c124a..3145c62484d 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include "pci-sh4.h" diff --git a/arch/sh/include/asm/se.h b/arch/sh/include/mach-se/mach/se.h similarity index 100% rename from arch/sh/include/asm/se.h rename to arch/sh/include/mach-se/mach/se.h diff --git a/arch/sh/include/asm/se7206.h b/arch/sh/include/mach-se/mach/se7206.h similarity index 100% rename from arch/sh/include/asm/se7206.h rename to arch/sh/include/mach-se/mach/se7206.h diff --git a/arch/sh/include/asm/se7343.h b/arch/sh/include/mach-se/mach/se7343.h similarity index 100% rename from arch/sh/include/asm/se7343.h rename to arch/sh/include/mach-se/mach/se7343.h diff --git a/arch/sh/include/asm/se7721.h b/arch/sh/include/mach-se/mach/se7721.h similarity index 100% rename from arch/sh/include/asm/se7721.h rename to arch/sh/include/mach-se/mach/se7721.h diff --git a/arch/sh/include/asm/se7722.h b/arch/sh/include/mach-se/mach/se7722.h similarity index 100% rename from arch/sh/include/asm/se7722.h rename to arch/sh/include/mach-se/mach/se7722.h diff --git a/arch/sh/include/asm/se7751.h b/arch/sh/include/mach-se/mach/se7751.h similarity index 100% rename from arch/sh/include/asm/se7751.h rename to arch/sh/include/mach-se/mach/se7751.h diff --git a/arch/sh/include/asm/se7780.h b/arch/sh/include/mach-se/mach/se7780.h similarity index 100% rename from arch/sh/include/asm/se7780.h rename to arch/sh/include/mach-se/mach/se7780.h diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c index d3d9f320423..bea40339919 100644 --- a/arch/sh/kernel/cf-enabler.c +++ b/arch/sh/kernel/cf-enabler.c @@ -80,11 +80,11 @@ static int __init cf_init_default(void) } #if defined(CONFIG_SH_SOLUTION_ENGINE) -#include +#include #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE) -#include +#include #elif defined(CONFIG_SH_7721_SOLUTION_ENGINE) -#include +#include #endif /* -- GitLab From 0764bff445bb13cd17e41b6ab196ef83c23c6c17 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 22:10:01 +0900 Subject: [PATCH 0224/1024] sh: More header path fixups for mach dir refactoring. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-highlander/psw.c | 2 +- arch/sh/boards/mach-landisk/gio.c | 4 ++-- arch/sh/boards/mach-landisk/irq.c | 2 +- arch/sh/boards/mach-landisk/psw.c | 2 +- arch/sh/boards/mach-landisk/setup.c | 2 +- arch/sh/boards/mach-se/7343/io.c | 2 +- arch/sh/boards/mach-sh03/setup.c | 4 ++-- arch/sh/include/mach-dreamcast/mach/pci.h | 2 +- drivers/cdrom/gdrom.c | 4 ++-- drivers/input/keyboard/maple_keyb.c | 1 - drivers/video/pvr2fb.c | 6 +++--- 11 files changed, 15 insertions(+), 16 deletions(-) diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c index 0b3e062e96c..be8d5477fc6 100644 --- a/arch/sh/boards/mach-highlander/psw.c +++ b/arch/sh/boards/mach-highlander/psw.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include static irqreturn_t psw_irq_handler(int irq, void *arg) diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c index edcde082032..25cdf735800 100644 --- a/arch/sh/boards/mach-landisk/gio.c +++ b/arch/sh/boards/mach-landisk/gio.c @@ -20,8 +20,8 @@ #include #include #include -#include -#include +#include +#include #define DEVCOUNT 4 #define GIO_MINOR 2 /* GIO minor no. */ diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c index d0f9378f6ff..7b284cde1f5 100644 --- a/arch/sh/boards/mach-landisk/irq.c +++ b/arch/sh/boards/mach-landisk/irq.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include static void disable_landisk_irq(unsigned int irq) { diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c index 4bd502cbaee..e6b0efa098d 100644 --- a/arch/sh/boards/mach-landisk/psw.c +++ b/arch/sh/boards/mach-landisk/psw.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include static irqreturn_t psw_irq_handler(int irq, void *arg) diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c index 470c7811168..db22ea2e6d4 100644 --- a/arch/sh/boards/mach-landisk/setup.c +++ b/arch/sh/boards/mach-landisk/setup.c @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include void init_landisk_IRQ(void); diff --git a/arch/sh/boards/mach-se/7343/io.c b/arch/sh/boards/mach-se/7343/io.c index e2fae32d27d..8741abc1da7 100644 --- a/arch/sh/boards/mach-se/7343/io.c +++ b/arch/sh/boards/mach-se/7343/io.c @@ -6,7 +6,7 @@ */ #include #include -#include +#include #define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c index cd9cff1ed34..5771219be3f 100644 --- a/arch/sh/boards/mach-sh03/setup.c +++ b/arch/sh/boards/mach-sh03/setup.c @@ -11,8 +11,8 @@ #include #include #include -#include -#include +#include +#include #include static void __init init_sh03_IRQ(void) diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h index 9264ff46c63..75fc9009e09 100644 --- a/arch/sh/include/mach-dreamcast/mach/pci.h +++ b/arch/sh/include/mach-dreamcast/mach/pci.h @@ -11,7 +11,7 @@ #ifndef __ASM_SH_DREAMCAST_PCI_H #define __ASM_SH_DREAMCAST_PCI_H -#include +#include #define GAPSPCI_REGS 0x01001400 #define GAPSPCI_DMA_BASE 0x01840000 diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c index 71ec426ecff..1e0455bd6df 100644 --- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -39,8 +39,8 @@ #include #include #include -#include -#include +#include +#include #define GDROM_DEV_NAME "gdrom" #define GD_SESSION_OFFSET 150 diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c index 2b404284c28..7797ef6e5e6 100644 --- a/drivers/input/keyboard/maple_keyb.c +++ b/drivers/input/keyboard/maple_keyb.c @@ -27,7 +27,6 @@ #include #include #include -#include /* Very simple mutex to ensure proper cleanup */ static DEFINE_MUTEX(maple_keyb_mutex); diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c index 8c863a7f654..0a0fd48a856 100644 --- a/drivers/video/pvr2fb.c +++ b/drivers/video/pvr2fb.c @@ -58,18 +58,18 @@ #ifdef CONFIG_SH_DREAMCAST #include -#include +#include #endif #ifdef CONFIG_SH_DMA #include -#include +#include #include #endif #ifdef CONFIG_SH_STORE_QUEUES #include -#include +#include #endif #ifndef PCI_DEVICE_ID_NEC_NEON250 -- GitLab From 1795cf48b322b4d19230a40dbe7181acedd34a94 Mon Sep 17 00:00:00 2001 From: Adrian McMenamin Date: Tue, 29 Jul 2008 22:10:56 +0900 Subject: [PATCH 0225/1024] sh/maple: clean maple bus code This patch cleans up the handling of the maple bus queue to remove the risk of races when adding packets. It also removes references to the redundant connect and disconnect functions. Signed-off-by: Adrian McMenamin Signed-off-by: Paul Mundt --- drivers/sh/maple/maple.c | 265 +++++++++++++++++++++++++++------------ include/linux/maple.h | 6 +- 2 files changed, 189 insertions(+), 82 deletions(-) diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index 617efb1640b..be97789fa5f 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -24,13 +24,12 @@ #include #include #include +#include #include #include #include -#include -#include -#include -#include +#include +#include MODULE_AUTHOR("Yaegshi Takeshi, Paul Mundt, M.R. Brown, Adrian McMenamin"); MODULE_DESCRIPTION("Maple bus driver for Dreamcast"); @@ -46,14 +45,15 @@ static DECLARE_WORK(maple_vblank_process, maple_vblank_handler); static LIST_HEAD(maple_waitq); static LIST_HEAD(maple_sentq); -static DEFINE_MUTEX(maple_list_lock); +/* mutex to protect queue of waiting packets */ +static DEFINE_MUTEX(maple_wlist_lock); static struct maple_driver maple_dummy_driver; static struct device maple_bus; static int subdevice_map[MAPLE_PORTS]; static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr; static unsigned long maple_pnp_time; -static int started, scanning, liststatus, fullscan; +static int started, scanning, fullscan; static struct kmem_cache *maple_queue_cache; struct maple_device_specify { @@ -129,35 +129,124 @@ static void maple_release_device(struct device *dev) kfree(mdev); } -/** +/* * maple_add_packet - add a single instruction to the queue - * @mq: instruction to add to waiting queue + * @mdev - maple device + * @function - function on device being queried + * @command - maple command to add + * @length - length of command string (in 32 bit words) + * @data - remainder of command string */ -void maple_add_packet(struct mapleq *mq) +int maple_add_packet(struct maple_device *mdev, u32 function, u32 command, + size_t length, void *data) { - mutex_lock(&maple_list_lock); - list_add(&mq->list, &maple_waitq); - mutex_unlock(&maple_list_lock); + int locking, ret = 0; + void *sendbuf = NULL; + + mutex_lock(&maple_wlist_lock); + /* bounce if device already locked */ + locking = mutex_is_locked(&mdev->mq->mutex); + if (locking) { + ret = -EBUSY; + goto out; + } + + mutex_lock(&mdev->mq->mutex); + + if (length) { + sendbuf = kmalloc(length * 4, GFP_KERNEL); + if (!sendbuf) { + mutex_unlock(&mdev->mq->mutex); + ret = -ENOMEM; + goto out; + } + ((__be32 *)sendbuf)[0] = cpu_to_be32(function); + } + + mdev->mq->command = command; + mdev->mq->length = length; + if (length > 1) + memcpy(sendbuf + 4, data, (length - 1) * 4); + mdev->mq->sendbuf = sendbuf; + + list_add(&mdev->mq->list, &maple_waitq); +out: + mutex_unlock(&maple_wlist_lock); + return ret; } EXPORT_SYMBOL_GPL(maple_add_packet); +/* + * maple_add_packet_sleeps - add a single instruction to the queue + * - waits for lock to be free + * @mdev - maple device + * @function - function on device being queried + * @command - maple command to add + * @length - length of command string (in 32 bit words) + * @data - remainder of command string + */ +int maple_add_packet_sleeps(struct maple_device *mdev, u32 function, + u32 command, size_t length, void *data) +{ + int locking, ret = 0; + void *sendbuf = NULL; + + locking = mutex_lock_interruptible(&mdev->mq->mutex); + if (locking) { + ret = -EIO; + goto out; + } + + if (length) { + sendbuf = kmalloc(length * 4, GFP_KERNEL); + if (!sendbuf) { + mutex_unlock(&mdev->mq->mutex); + ret = -ENOMEM; + goto out; + } + ((__be32 *)sendbuf)[0] = cpu_to_be32(function); + } + + mdev->mq->command = command; + mdev->mq->length = length; + if (length > 1) + memcpy(sendbuf + 4, data, (length - 1) * 4); + mdev->mq->sendbuf = sendbuf; + + mutex_lock(&maple_wlist_lock); + list_add(&mdev->mq->list, &maple_waitq); + mutex_unlock(&maple_wlist_lock); +out: + return ret; +} +EXPORT_SYMBOL_GPL(maple_add_packet_sleeps); + static struct mapleq *maple_allocq(struct maple_device *mdev) { struct mapleq *mq; mq = kmalloc(sizeof(*mq), GFP_KERNEL); if (!mq) - return NULL; + goto failed_nomem; mq->dev = mdev; mq->recvbufdcsp = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL); mq->recvbuf = (void *) P2SEGADDR(mq->recvbufdcsp); - if (!mq->recvbuf) { - kfree(mq); - return NULL; - } + if (!mq->recvbuf) + goto failed_p2; + /* + * most devices do not need the mutex - but + * anything that injects block reads or writes + * will rely on it + */ + mutex_init(&mq->mutex); return mq; + +failed_p2: + kfree(mq); +failed_nomem: + return NULL; } static struct maple_device *maple_alloc_dev(int port, int unit) @@ -178,7 +267,6 @@ static struct maple_device *maple_alloc_dev(int port, int unit) } mdev->dev.bus = &maple_bus_type; mdev->dev.parent = &maple_bus; - mdev->function = 0; return mdev; } @@ -216,7 +304,6 @@ static void maple_build_block(struct mapleq *mq) *maple_sendptr++ = PHYSADDR(mq->recvbuf); *maple_sendptr++ = mq->command | (to << 8) | (from << 16) | (len << 24); - while (len-- > 0) *maple_sendptr++ = *lsendbuf++; } @@ -224,22 +311,27 @@ static void maple_build_block(struct mapleq *mq) /* build up command queue */ static void maple_send(void) { - int i; - int maple_packets; + int i, maple_packets = 0; struct mapleq *mq, *nmq; if (!list_empty(&maple_sentq)) return; - if (list_empty(&maple_waitq) || !maple_dma_done()) + mutex_lock(&maple_wlist_lock); + if (list_empty(&maple_waitq) || !maple_dma_done()) { + mutex_unlock(&maple_wlist_lock); return; - maple_packets = 0; - maple_sendptr = maple_lastptr = maple_sendbuf; + } + mutex_unlock(&maple_wlist_lock); + maple_lastptr = maple_sendbuf; + maple_sendptr = maple_sendbuf; + mutex_lock(&maple_wlist_lock); list_for_each_entry_safe(mq, nmq, &maple_waitq, list) { maple_build_block(mq); list_move(&mq->list, &maple_sentq); if (maple_packets++ > MAPLE_MAXPACKETS) break; } + mutex_unlock(&maple_wlist_lock); if (maple_packets > 0) { for (i = 0; i < (1 << MAPLE_DMA_PAGES); i++) dma_cache_sync(0, maple_sendbuf + i * PAGE_SIZE, @@ -247,7 +339,8 @@ static void maple_send(void) } } -static int attach_matching_maple_driver(struct device_driver *driver, +/* check if there is a driver registered likely to match this device */ +static int check_matching_maple_driver(struct device_driver *driver, void *devptr) { struct maple_driver *maple_drv; @@ -255,12 +348,8 @@ static int attach_matching_maple_driver(struct device_driver *driver, mdev = devptr; maple_drv = to_maple_driver(driver); - if (mdev->devinfo.function & be32_to_cpu(maple_drv->function)) { - if (maple_drv->connect(mdev) == 0) { - mdev->driver = maple_drv; - return 1; - } - } + if (mdev->devinfo.function & cpu_to_be32(maple_drv->function)) + return 1; return 0; } @@ -268,11 +357,6 @@ static void maple_detach_driver(struct maple_device *mdev) { if (!mdev) return; - if (mdev->driver) { - if (mdev->driver->disconnect) - mdev->driver->disconnect(mdev); - } - mdev->driver = NULL; device_unregister(&mdev->dev); mdev = NULL; } @@ -328,8 +412,8 @@ static void maple_attach_driver(struct maple_device *mdev) mdev->port, mdev->unit, function); matched = - bus_for_each_drv(&maple_bus_type, NULL, mdev, - attach_matching_maple_driver); + bus_for_each_drv(&maple_bus_type, NULL, mdev, + check_matching_maple_driver); if (matched == 0) { /* Driver does not exist yet */ @@ -373,45 +457,48 @@ static int detach_maple_device(struct device *device, void *portptr) static int setup_maple_commands(struct device *device, void *ignored) { + int add; struct maple_device *maple_dev = to_maple_dev(device); if ((maple_dev->interval > 0) && time_after(jiffies, maple_dev->when)) { - maple_dev->when = jiffies + maple_dev->interval; - maple_dev->mq->command = MAPLE_COMMAND_GETCOND; - maple_dev->mq->sendbuf = &maple_dev->function; - maple_dev->mq->length = 1; - maple_add_packet(maple_dev->mq); - liststatus++; + /* bounce if we cannot lock */ + add = maple_add_packet(maple_dev, + be32_to_cpu(maple_dev->devinfo.function), + MAPLE_COMMAND_GETCOND, 1, NULL); + if (!add) + maple_dev->when = jiffies + maple_dev->interval; } else { - if (time_after(jiffies, maple_pnp_time)) { - maple_dev->mq->command = MAPLE_COMMAND_DEVINFO; - maple_dev->mq->length = 0; - maple_add_packet(maple_dev->mq); - liststatus++; - } + if (time_after(jiffies, maple_pnp_time)) + /* This will also bounce */ + maple_add_packet(maple_dev, 0, + MAPLE_COMMAND_DEVINFO, 0, NULL); } - return 0; } /* VBLANK bottom half - implemented via workqueue */ static void maple_vblank_handler(struct work_struct *work) { - if (!maple_dma_done()) - return; - if (!list_empty(&maple_sentq)) + if (!list_empty(&maple_sentq) || !maple_dma_done()) return; + ctrl_outl(0, MAPLE_ENABLE); - liststatus = 0; + bus_for_each_dev(&maple_bus_type, NULL, NULL, setup_maple_commands); + if (time_after(jiffies, maple_pnp_time)) maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL; - if (liststatus && list_empty(&maple_sentq)) { - INIT_LIST_HEAD(&maple_sentq); + + mutex_lock(&maple_wlist_lock); + if (!list_empty(&maple_waitq) && list_empty(&maple_sentq)) { + mutex_unlock(&maple_wlist_lock); maple_send(); + } else { + mutex_unlock(&maple_wlist_lock); } + maplebus_dma_reset(); } @@ -422,8 +509,8 @@ static void maple_map_subunits(struct maple_device *mdev, int submask) struct maple_device *mdev_add; struct maple_device_specify ds; + ds.port = mdev->port; for (k = 0; k < 5; k++) { - ds.port = mdev->port; ds.unit = k + 1; retval = bus_for_each_dev(&maple_bus_type, NULL, &ds, @@ -437,9 +524,9 @@ static void maple_map_subunits(struct maple_device *mdev, int submask) mdev_add = maple_alloc_dev(mdev->port, k + 1); if (!mdev_add) return; - mdev_add->mq->command = MAPLE_COMMAND_DEVINFO; - mdev_add->mq->length = 0; - maple_add_packet(mdev_add->mq); + maple_add_packet(mdev_add, 0, MAPLE_COMMAND_DEVINFO, + 0, NULL); + /* mark that we are checking sub devices */ scanning = 1; } submask = submask >> 1; @@ -505,6 +592,28 @@ static void maple_response_devinfo(struct maple_device *mdev, } } +static void maple_port_rescan(void) +{ + int i; + struct maple_device *mdev; + + fullscan = 1; + for (i = 0; i < MAPLE_PORTS; i++) { + if (checked[i] == false) { + fullscan = 0; + mdev = baseunits[i]; + /* + * test lock in case scan has failed + * but device is still locked + */ + if (mutex_is_locked(&mdev->mq->mutex)) + mutex_unlock(&mdev->mq->mutex); + maple_add_packet(mdev, 0, MAPLE_COMMAND_DEVINFO, + 0, NULL); + } + } +} + /* maple dma end bottom half - implemented via workqueue */ static void maple_dma_handler(struct work_struct *work) { @@ -512,7 +621,6 @@ static void maple_dma_handler(struct work_struct *work) struct maple_device *dev; char *recvbuf; enum maple_code code; - int i; if (!maple_dma_done()) return; @@ -522,6 +630,10 @@ static void maple_dma_handler(struct work_struct *work) recvbuf = mq->recvbuf; code = recvbuf[0]; dev = mq->dev; + kfree(mq->sendbuf); + mutex_unlock(&mq->mutex); + list_del_init(&mq->list); + switch (code) { case MAPLE_RESPONSE_NONE: maple_response_none(dev, mq); @@ -558,26 +670,16 @@ static void maple_dma_handler(struct work_struct *work) break; } } - INIT_LIST_HEAD(&maple_sentq); + /* if scanning is 1 then we have subdevices to check */ if (scanning == 1) { maple_send(); scanning = 2; } else scanning = 0; - - if (!fullscan) { - fullscan = 1; - for (i = 0; i < MAPLE_PORTS; i++) { - if (checked[i] == false) { - fullscan = 0; - dev = baseunits[i]; - dev->mq->command = - MAPLE_COMMAND_DEVINFO; - dev->mq->length = 0; - maple_add_packet(dev->mq); - } - } - } + /*check if we have actually tested all ports yet */ + if (!fullscan) + maple_port_rescan(); + /* mark that we have been through the first scan */ if (started == 0) started = 1; } @@ -631,7 +733,7 @@ static int match_maple_bus_driver(struct device *devptr, if (maple_dev->devinfo.function == 0xFFFFFFFF) return 0; else if (maple_dev->devinfo.function & - be32_to_cpu(maple_drv->function)) + cpu_to_be32(maple_drv->function)) return 1; return 0; } @@ -713,6 +815,9 @@ static int __init maple_bus_init(void) if (!maple_queue_cache) goto cleanup_bothirqs; + INIT_LIST_HEAD(&maple_waitq); + INIT_LIST_HEAD(&maple_sentq); + /* setup maple ports */ for (i = 0; i < MAPLE_PORTS; i++) { checked[i] = false; @@ -723,9 +828,7 @@ static int __init maple_bus_init(void) maple_free_dev(mdev[i]); goto cleanup_cache; } - mdev[i]->mq->command = MAPLE_COMMAND_DEVINFO; - mdev[i]->mq->length = 0; - maple_add_packet(mdev[i]->mq); + maple_add_packet(mdev[i], 0, MAPLE_COMMAND_DEVINFO, 0, NULL); subdevice_map[i] = 0; } diff --git a/include/linux/maple.h b/include/linux/maple.h index 523a286bb47..c853b106601 100644 --- a/include/linux/maple.h +++ b/include/linux/maple.h @@ -2,6 +2,7 @@ #define __LINUX_MAPLE_H #include +#include extern struct bus_type maple_bus_type; @@ -33,6 +34,7 @@ struct mapleq { void *sendbuf, *recvbuf, *recvbufdcsp; unsigned char length; enum maple_code command; + struct mutex mutex; }; struct maple_devinfo { @@ -69,7 +71,9 @@ void maple_getcond_callback(struct maple_device *dev, unsigned long interval, unsigned long function); int maple_driver_register(struct device_driver *drv); -void maple_add_packet(struct mapleq *mq); +int maple_add_packet_sleeps(struct maple_device *mdev, u32 function, + u32 command, u32 length, void *data); +void maple_clear_dev(struct maple_device *mdev); #define to_maple_dev(n) container_of(n, struct maple_device, dev) #define to_maple_driver(n) container_of(n, struct maple_driver, drv) -- GitLab From 93dc544cf4892b9188d7d0d4946b0394020b4551 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 22:46:55 +0900 Subject: [PATCH 0226/1024] sh: Provide common CPU headers, prune the SH-2 and SH-2A directories. Signed-off-by: Paul Mundt --- arch/sh/Makefile | 26 ++++--- .../{cpu-sh2 => cpu-common}/cpu/addrspace.h | 0 .../{cpu-sh2 => cpu-common}/cpu/cacheflush.h | 4 +- .../{cpu-sh2 => cpu-common}/cpu/mmu_context.h | 0 .../{cpu-sh2 => cpu-common}/cpu/sigcontext.h | 0 .../{cpu-sh2 => cpu-common}/cpu/timer.h | 0 arch/sh/include/cpu-sh2a/cpu/addrspace.h | 10 --- arch/sh/include/cpu-sh2a/cpu/cacheflush.h | 44 ------------ arch/sh/include/cpu-sh2a/cpu/dma.h | 24 +------ arch/sh/include/cpu-sh2a/cpu/mmu_context.h | 16 ----- arch/sh/include/cpu-sh2a/cpu/timer.h | 6 -- arch/sh/include/cpu-sh2a/cpu/ubc.h | 33 +-------- arch/sh/include/cpu-sh2a/cpu/watchdog.h | 70 +------------------ 13 files changed, 23 insertions(+), 210 deletions(-) rename arch/sh/include/{cpu-sh2 => cpu-common}/cpu/addrspace.h (100%) rename arch/sh/include/{cpu-sh2 => cpu-common}/cpu/cacheflush.h (99%) rename arch/sh/include/{cpu-sh2 => cpu-common}/cpu/mmu_context.h (100%) rename arch/sh/include/{cpu-sh2 => cpu-common}/cpu/sigcontext.h (100%) rename arch/sh/include/{cpu-sh2 => cpu-common}/cpu/timer.h (100%) delete mode 100644 arch/sh/include/cpu-sh2a/cpu/addrspace.h delete mode 100644 arch/sh/include/cpu-sh2a/cpu/cacheflush.h delete mode 100644 arch/sh/include/cpu-sh2a/cpu/mmu_context.h delete mode 100644 arch/sh/include/cpu-sh2a/cpu/timer.h diff --git a/arch/sh/Makefile b/arch/sh/Makefile index fb3b65ed291..fafc01236f6 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -91,7 +91,6 @@ LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' LDFLAGS += -EB endif - head-y := arch/sh/kernel/init_task.o head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o @@ -134,11 +133,22 @@ endif # Companion chips core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/ -cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2 -cpuincdir-$(CONFIG_CPU_SH2A) := cpu-sh2a -cpuincdir-$(CONFIG_CPU_SH3) := cpu-sh3 -cpuincdir-$(CONFIG_CPU_SH4) := cpu-sh4 -cpuincdir-$(CONFIG_CPU_SH5) := cpu-sh5 +# +# CPU header paths +# +# These are ordered by optimization level. A CPU family that is a subset +# of another (ie, SH-2A / SH-2), is picked up first, with increasing +# levels of genericness if nothing more suitable is situated in the +# hierarchy. +# +# As an example, in order of preference, SH-2A > SH-2 > common definitions. +# +cpuincdir-$(CONFIG_CPU_SH2A) += cpu-sh2a +cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2 +cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3 +cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4 +cpuincdir-$(CONFIG_CPU_SH5) += cpu-sh5 +cpuincdir-y += cpu-common # Must be last libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) @@ -149,8 +159,8 @@ drivers-$(CONFIG_OPROFILE) += arch/sh/oprofile/ boot := arch/sh/boot -cflags-y += -Iarch/sh/include/$(cpuincdir-y) -cflags-y += $(foreach d, $(machdir-y), -Iarch/sh/include/$(d)) +cflags-y += $(foreach d, $(cpuincdir-y), -Iarch/sh/include/$(d)) \ + $(foreach d, $(machdir-y), -Iarch/sh/include/$(d)) KBUILD_CFLAGS += -pipe $(cflags-y) KBUILD_CPPFLAGS += $(cflags-y) diff --git a/arch/sh/include/cpu-sh2/cpu/addrspace.h b/arch/sh/include/cpu-common/cpu/addrspace.h similarity index 100% rename from arch/sh/include/cpu-sh2/cpu/addrspace.h rename to arch/sh/include/cpu-common/cpu/addrspace.h diff --git a/arch/sh/include/cpu-sh2/cpu/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h similarity index 99% rename from arch/sh/include/cpu-sh2/cpu/cacheflush.h rename to arch/sh/include/cpu-common/cpu/cacheflush.h index 2979efb26de..c3db00b7360 100644 --- a/arch/sh/include/cpu-sh2/cpu/cacheflush.h +++ b/arch/sh/include/cpu-common/cpu/cacheflush.h @@ -10,7 +10,7 @@ #ifndef __ASM_CPU_SH2_CACHEFLUSH_H #define __ASM_CPU_SH2_CACHEFLUSH_H -/* +/* * Cache flushing: * * - flush_cache_all() flushes entire cache @@ -40,5 +40,5 @@ #define flush_cache_sigtramp(vaddr) do { } while (0) #define p3_cache_init() do { } while (0) -#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */ +#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */ diff --git a/arch/sh/include/cpu-sh2/cpu/mmu_context.h b/arch/sh/include/cpu-common/cpu/mmu_context.h similarity index 100% rename from arch/sh/include/cpu-sh2/cpu/mmu_context.h rename to arch/sh/include/cpu-common/cpu/mmu_context.h diff --git a/arch/sh/include/cpu-sh2/cpu/sigcontext.h b/arch/sh/include/cpu-common/cpu/sigcontext.h similarity index 100% rename from arch/sh/include/cpu-sh2/cpu/sigcontext.h rename to arch/sh/include/cpu-common/cpu/sigcontext.h diff --git a/arch/sh/include/cpu-sh2/cpu/timer.h b/arch/sh/include/cpu-common/cpu/timer.h similarity index 100% rename from arch/sh/include/cpu-sh2/cpu/timer.h rename to arch/sh/include/cpu-common/cpu/timer.h diff --git a/arch/sh/include/cpu-sh2a/cpu/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h deleted file mode 100644 index 795ddd6856a..00000000000 --- a/arch/sh/include/cpu-sh2a/cpu/addrspace.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H -#define __ASM_SH_CPU_SH2A_ADDRSPACE_H - -#define P0SEG 0x00000000 -#define P1SEG 0x00000000 -#define P2SEG 0x20000000 -#define P3SEG 0x00000000 -#define P4SEG 0x80000000 - -#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h deleted file mode 100644 index 2979efb26de..00000000000 --- a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/cacheflush.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_CACHEFLUSH_H -#define __ASM_CPU_SH2_CACHEFLUSH_H - -/* - * Cache flushing: - * - * - flush_cache_all() flushes entire cache - * - flush_cache_mm(mm) flushes the specified mm context's cache lines - * - flush_cache_dup mm(mm) handles cache flushing when forking - * - flush_cache_page(mm, vmaddr, pfn) flushes a single page - * - flush_cache_range(vma, start, end) flushes a range of pages - * - * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache - * - flush_icache_range(start, end) flushes(invalidates) a range for icache - * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache - * - * Caches are indexed (effectively) by physical address on SH-2, so - * we don't need them. - */ -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page(page) do { } while (0) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) -#define flush_cache_sigtramp(vaddr) do { } while (0) - -#define p3_cache_init() do { } while (0) -#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */ - diff --git a/arch/sh/include/cpu-sh2a/cpu/dma.h b/arch/sh/include/cpu-sh2a/cpu/dma.h index d66b43cdc63..27a13ef4fdf 100644 --- a/arch/sh/include/cpu-sh2a/cpu/dma.h +++ b/arch/sh/include/cpu-sh2a/cpu/dma.h @@ -1,23 +1 @@ -/* - * Definitions for the SH-2 DMAC. - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_DMA_H -#define __ASM_CPU_SH2_DMA_H - -#define SH_MAX_DMA_CHANNELS 2 - -#define SAR ((unsigned long[]){ 0xffffff80, 0xffffff90 }) -#define DAR ((unsigned long[]){ 0xffffff84, 0xffffff94 }) -#define DMATCR ((unsigned long[]){ 0xffffff88, 0xffffff98 }) -#define CHCR ((unsigned long[]){ 0xfffffffc, 0xffffff9c }) - -#define DMAOR 0xffffffb0 - -#endif /* __ASM_CPU_SH2_DMA_H */ - +#include diff --git a/arch/sh/include/cpu-sh2a/cpu/mmu_context.h b/arch/sh/include/cpu-sh2a/cpu/mmu_context.h deleted file mode 100644 index beeb299e01e..00000000000 --- a/arch/sh/include/cpu-sh2a/cpu/mmu_context.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-sh/cpu-sh2/mmu_context.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H -#define __ASM_CPU_SH2_MMU_CONTEXT_H - -/* No MMU */ - -#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */ - diff --git a/arch/sh/include/cpu-sh2a/cpu/timer.h b/arch/sh/include/cpu-sh2a/cpu/timer.h deleted file mode 100644 index a39c241e819..00000000000 --- a/arch/sh/include/cpu-sh2a/cpu/timer.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_CPU_SH2_TIMER_H -#define __ASM_CPU_SH2_TIMER_H - -/* Nothing needed yet */ - -#endif /* __ASM_CPU_SH2_TIMER_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h index ba0e87f19c7..8ce2fc1cf62 100644 --- a/arch/sh/include/cpu-sh2a/cpu/ubc.h +++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h @@ -1,32 +1 @@ -/* - * include/asm-sh/cpu-sh2/ubc.h - * - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_UBC_H -#define __ASM_CPU_SH2_UBC_H - -#define UBC_BARA 0xffffff40 -#define UBC_BAMRA 0xffffff44 -#define UBC_BBRA 0xffffff48 -#define UBC_BARB 0xffffff60 -#define UBC_BAMRB 0xffffff64 -#define UBC_BBRB 0xffffff68 -#define UBC_BDRB 0xffffff70 -#define UBC_BDMRB 0xffffff74 -#define UBC_BRCR 0xffffff78 - -/* - * We don't have any ASID changes to make in the UBC on the SH-2. - * - * Make these purposely invalid to track misuse. - */ -#define UBC_BASRA 0x00000000 -#define UBC_BASRB 0x00000000 - -#endif /* __ASM_CPU_SH2_UBC_H */ - +#include diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h index 393161c9c6d..e7e8259e468 100644 --- a/arch/sh/include/cpu-sh2a/cpu/watchdog.h +++ b/arch/sh/include/cpu-sh2a/cpu/watchdog.h @@ -1,69 +1 @@ -/* - * include/asm-sh/cpu-sh2/watchdog.h - * - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __ASM_CPU_SH2_WATCHDOG_H -#define __ASM_CPU_SH2_WATCHDOG_H - -/* - * More SH-2 brilliance .. its not good enough that we can't read - * and write the same sizes to WTCNT, now we have to read and write - * with different sizes at different addresses for WTCNT _and_ RSTCSR. - * - * At least on the bright side no one has managed to screw over WTCSR - * in this fashion .. yet. - */ -/* Register definitions */ -#define WTCNT 0xfffffe80 -#define WTCSR 0xfffffe80 -#define RSTCSR 0xfffffe82 - -#define WTCNT_R (WTCNT + 1) -#define RSTCSR_R (RSTCSR + 1) - -/* Bit definitions */ -#define WTCSR_IOVF 0x80 -#define WTCSR_WT 0x40 -#define WTCSR_TME 0x20 -#define WTCSR_RSTS 0x00 - -#define RSTCSR_RSTS 0x20 - -/** - * sh_wdt_read_rstcsr - Read from Reset Control/Status Register - * - * Reads back the RSTCSR value. - */ -static inline __u8 sh_wdt_read_rstcsr(void) -{ - /* - * Same read/write brain-damage as for WTCNT here.. - */ - return ctrl_inb(RSTCSR_R); -} - -/** - * sh_wdt_write_csr - Write to Reset Control/Status Register - * - * @val: Value to write - * - * Writes the given value @val to the lower byte of the control/status - * register. The upper byte is set manually on each write. - */ -static inline void sh_wdt_write_rstcsr(__u8 val) -{ - /* - * Note: Due to the brain-damaged nature of this register, - * we can't presently touch the WOVF bit, since the upper byte - * has to be swapped for this. So just leave it alone.. - */ - ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR); -} - -#endif /* __ASM_CPU_SH2_WATCHDOG_H */ - +#include -- GitLab From 51f3547d619956e9b428bfff17004d8f4d259a02 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 22:52:49 +0900 Subject: [PATCH 0227/1024] sh: Allow SH-3 and SH-5 to use common headers. Signed-off-by: Paul Mundt --- .../include/{cpu-sh2 => cpu-common}/cpu/rtc.h | 0 arch/sh/include/cpu-sh3/cpu/addrspace.h | 19 ---------- arch/sh/include/cpu-sh3/cpu/cacheflush.h | 36 +------------------ arch/sh/include/cpu-sh3/cpu/rtc.h | 8 ----- arch/sh/include/cpu-sh3/cpu/sigcontext.h | 17 --------- arch/sh/include/cpu-sh5/cpu/timer.h | 4 --- 6 files changed, 1 insertion(+), 83 deletions(-) rename arch/sh/include/{cpu-sh2 => cpu-common}/cpu/rtc.h (100%) delete mode 100644 arch/sh/include/cpu-sh3/cpu/addrspace.h delete mode 100644 arch/sh/include/cpu-sh3/cpu/rtc.h delete mode 100644 arch/sh/include/cpu-sh3/cpu/sigcontext.h delete mode 100644 arch/sh/include/cpu-sh5/cpu/timer.h diff --git a/arch/sh/include/cpu-sh2/cpu/rtc.h b/arch/sh/include/cpu-common/cpu/rtc.h similarity index 100% rename from arch/sh/include/cpu-sh2/cpu/rtc.h rename to arch/sh/include/cpu-common/cpu/rtc.h diff --git a/arch/sh/include/cpu-sh3/cpu/addrspace.h b/arch/sh/include/cpu-sh3/cpu/addrspace.h deleted file mode 100644 index 0f94726c7d6..00000000000 --- a/arch/sh/include/cpu-sh3/cpu/addrspace.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Kaz Kojima - * - * Defitions for the address spaces of the SH-3 CPUs. - */ -#ifndef __ASM_CPU_SH3_ADDRSPACE_H -#define __ASM_CPU_SH3_ADDRSPACE_H - -#define P0SEG 0x00000000 -#define P1SEG 0x80000000 -#define P2SEG 0xa0000000 -#define P3SEG 0xc0000000 -#define P4SEG 0xe0000000 - -#endif /* __ASM_CPU_SH3_ADDRSPACE_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h index f70d8ef76a1..abc90988080 100644 --- a/arch/sh/include/cpu-sh3/cpu/cacheflush.h +++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h @@ -10,25 +10,7 @@ #ifndef __ASM_CPU_SH3_CACHEFLUSH_H #define __ASM_CPU_SH3_CACHEFLUSH_H -/* - * Cache flushing: - * - * - flush_cache_all() flushes entire cache - * - flush_cache_mm(mm) flushes the specified mm context's cache lines - * - flush_cache_dup mm(mm) handles cache flushing when forking - * - flush_cache_page(mm, vmaddr, pfn) flushes a single page - * - flush_cache_range(vma, start, end) flushes a range of pages - * - * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache - * - flush_icache_range(start, end) flushes(invalidates) a range for icache - * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache - * - * Caches are indexed (effectively) by physical address on SH-3, so - * we don't need them. - */ - #if defined(CONFIG_SH7705_CACHE_32KB) - /* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the * SH4. Unlike the SH4 this is a unified cache so we need to do some work * in mmap when 'exec'ing a new binary @@ -48,23 +30,7 @@ void flush_dcache_page(struct page *pg); void flush_icache_range(unsigned long start, unsigned long end); void flush_icache_page(struct vm_area_struct *vma, struct page *page); #else -#define flush_cache_all() do { } while (0) -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_dup_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) do { } while (0) -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -#define flush_dcache_page(page) do { } while (0) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma,pg) do { } while (0) +#include #endif -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -/* SH3 has unified cache so no special action needed here */ -#define flush_cache_sigtramp(vaddr) do { } while (0) -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) - -#define p3_cache_init() do { } while (0) - #endif /* __ASM_CPU_SH3_CACHEFLUSH_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/rtc.h b/arch/sh/include/cpu-sh3/cpu/rtc.h deleted file mode 100644 index 319404aaee3..00000000000 --- a/arch/sh/include/cpu-sh3/cpu/rtc.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_SH_CPU_SH3_RTC_H -#define __ASM_SH_CPU_SH3_RTC_H - -#define rtc_reg_size sizeof(u16) -#define RTC_BIT_INVERTED 0 /* No bug on SH7708, SH7709A */ -#define RTC_DEF_CAPABILITIES 0UL - -#endif /* __ASM_SH_CPU_SH3_RTC_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/sigcontext.h b/arch/sh/include/cpu-sh3/cpu/sigcontext.h deleted file mode 100644 index 17310dc03dc..00000000000 --- a/arch/sh/include/cpu-sh3/cpu/sigcontext.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASM_CPU_SH3_SIGCONTEXT_H -#define __ASM_CPU_SH3_SIGCONTEXT_H - -struct sigcontext { - unsigned long oldmask; - - /* CPU registers */ - unsigned long sc_regs[16]; - unsigned long sc_pc; - unsigned long sc_pr; - unsigned long sc_sr; - unsigned long sc_gbr; - unsigned long sc_mach; - unsigned long sc_macl; -}; - -#endif /* __ASM_CPU_SH3_SIGCONTEXT_H */ diff --git a/arch/sh/include/cpu-sh5/cpu/timer.h b/arch/sh/include/cpu-sh5/cpu/timer.h deleted file mode 100644 index 88da9b341a3..00000000000 --- a/arch/sh/include/cpu-sh5/cpu/timer.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASM_SH_CPU_SH5_TIMER_H -#define __ASM_SH_CPU_SH5_TIMER_H - -#endif /* __ASM_SH_CPU_SH5_TIMER_H */ -- GitLab From 11589418a1c4cf68be9367f802898d35e07809c4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 29 Jul 2008 11:42:23 +0100 Subject: [PATCH 0228/1024] ALSA: ASoC: Export dapm_reg_event() fully dapm_reg_event() is used by devices using SND_SOC_DAPM_REG() so needs to be exported to support building them as modules and prototyped to avoid sparse warnings and potential build issues. Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai --- include/sound/soc-dapm.h | 3 +++ sound/soc/soc-dapm.c | 1 + 2 files changed, 4 insertions(+) diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 3030fdc6981..c1b26fcc0b5 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -202,6 +202,9 @@ struct snd_soc_dapm_path; struct snd_soc_dapm_pin; struct snd_soc_dapm_route; +int dapm_reg_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event); + /* dapm controls */ int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 820347c9ae4..f9d100bc847 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -470,6 +470,7 @@ int dapm_reg_event(struct snd_soc_dapm_widget *w, return 0; } +EXPORT_SYMBOL_GPL(dapm_reg_event); /* * Scan each dapm widget for complete audio path. -- GitLab From c170f86e31410cc38971c1dedd8b25885e6e43b6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 23:12:25 +0900 Subject: [PATCH 0229/1024] sh: Make sure AT_SYSINFO_EHDR is exposed to userspace in asm/auxvec.h. Presently this is protected by a CONFIG_VSYSCALL ifdef so we don't inadvertently trigger the creation of the gate VMA on CPUs where we don't enable the vDSO, which is obviously not visible to userspace. Fix this up by adding in an ifndef __KERNEL__ check at the same time. Signed-off-by: Paul Mundt --- arch/sh/include/asm/auxvec.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/include/asm/auxvec.h b/arch/sh/include/asm/auxvec.h index a6b9d4f4859..483effd65e0 100644 --- a/arch/sh/include/asm/auxvec.h +++ b/arch/sh/include/asm/auxvec.h @@ -12,7 +12,7 @@ */ #define AT_FPUCW 18 /* Used FPU control word. */ -#ifdef CONFIG_VSYSCALL +#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__) /* * Only define this in the vsyscall case, the entry point to * the vsyscall page gets placed here. The kernel will attempt -- GitLab From c8b5d9dcbc94ae5e7d9ed647246df4454d25332e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 00:13:39 +0900 Subject: [PATCH 0230/1024] sh: Move out individual boards without mach groups. Signed-off-by: Paul Mundt --- arch/sh/Makefile | 8 ++------ arch/sh/boards/Kconfig | 15 ++++++++++++++- arch/sh/boards/Makefile | 8 ++++++++ .../{mach-ap325rxa/setup.c => board-ap325rxa.c} | 0 .../setup.c => board-magicpanelr2.c} | 0 .../{mach-rsk7203/setup.c => board-rsk7203.c} | 0 .../{mach-sh7785lcr/setup.c => board-sh7785lcr.c} | 0 .../boards/{mach-shmin/setup.c => board-shmin.c} | 0 arch/sh/boards/mach-ap325rxa/Makefile | 1 - arch/sh/boards/mach-magicpanelr2/Kconfig | 13 ------------- arch/sh/boards/mach-magicpanelr2/Makefile | 5 ----- arch/sh/boards/mach-rsk7203/Makefile | 1 - arch/sh/boards/mach-se/7619/Makefile | 5 ----- arch/sh/boards/mach-se/Makefile | 3 ++- .../mach-se/{7619/setup.c => board-se7619.c} | 0 arch/sh/boards/mach-sh7785lcr/Makefile | 1 - arch/sh/boards/mach-shmin/Makefile | 5 ----- 17 files changed, 26 insertions(+), 39 deletions(-) create mode 100644 arch/sh/boards/Makefile rename arch/sh/boards/{mach-ap325rxa/setup.c => board-ap325rxa.c} (100%) rename arch/sh/boards/{mach-magicpanelr2/setup.c => board-magicpanelr2.c} (100%) rename arch/sh/boards/{mach-rsk7203/setup.c => board-rsk7203.c} (100%) rename arch/sh/boards/{mach-sh7785lcr/setup.c => board-sh7785lcr.c} (100%) rename arch/sh/boards/{mach-shmin/setup.c => board-shmin.c} (100%) delete mode 100644 arch/sh/boards/mach-ap325rxa/Makefile delete mode 100644 arch/sh/boards/mach-magicpanelr2/Kconfig delete mode 100644 arch/sh/boards/mach-magicpanelr2/Makefile delete mode 100644 arch/sh/boards/mach-rsk7203/Makefile delete mode 100644 arch/sh/boards/mach-se/7619/Makefile rename arch/sh/boards/mach-se/{7619/setup.c => board-se7619.c} (100%) delete mode 100644 arch/sh/boards/mach-sh7785lcr/Makefile delete mode 100644 arch/sh/boards/mach-shmin/Makefile diff --git a/arch/sh/Makefile b/arch/sh/Makefile index fafc01236f6..6c93b948713 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -97,10 +97,10 @@ head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) -core-y += arch/sh/kernel/ arch/sh/mm/ +core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ -# Boards and Mach groups +# Mach groups machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast @@ -114,15 +114,11 @@ machdir-$(CONFIG_SH_MIGOR) += mach-migor machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780 machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto machdir-$(CONFIG_SH_RSK7203) += mach-rsk7203 -machdir-$(CONFIG_SH_AP325RXA) += mach-ap325rxa machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp -machdir-$(CONFIG_SH_SH7785LCR) += mach-sh7785lcr machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev machdir-$(CONFIG_SH_LANDISK) += mach-landisk machdir-$(CONFIG_SH_TITAN) += mach-titan -machdir-$(CONFIG_SH_SHMIN) += mach-shmin machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2 -machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += mach-magicpanelr2 machdir-$(CONFIG_SH_CAYMAN) += mach-cayman ifneq ($(machdir-y),) diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 324c25ac95c..ae194869fd6 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -242,4 +242,17 @@ source "arch/sh/boards/mach-r2d/Kconfig" source "arch/sh/boards/mach-highlander/Kconfig" source "arch/sh/boards/mach-sdk7780/Kconfig" source "arch/sh/boards/mach-migor/Kconfig" -source "arch/sh/boards/mach-magicpanelr2/Kconfig" + +if SH_MAGIC_PANEL_R2 + +menu "Magic Panel R2 options" + +config SH_MAGIC_PANEL_R2_VERSION + int SH_MAGIC_PANEL_R2_VERSION + default "3" + help + Set the version of the Magic Panel R2 + +endmenu + +endif diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile new file mode 100644 index 00000000000..ff9b93c5a91 --- /dev/null +++ b/arch/sh/boards/Makefile @@ -0,0 +1,8 @@ +# +# Specific board support, not covered by a mach group. +# +obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o +obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o +obj-$(CONFIG_SH_RSK7203) += board-rsk7203.o +obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o +obj-$(CONFIG_SH_SHMIN) += board-shmin..o diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/board-ap325rxa.c similarity index 100% rename from arch/sh/boards/mach-ap325rxa/setup.c rename to arch/sh/boards/board-ap325rxa.c diff --git a/arch/sh/boards/mach-magicpanelr2/setup.c b/arch/sh/boards/board-magicpanelr2.c similarity index 100% rename from arch/sh/boards/mach-magicpanelr2/setup.c rename to arch/sh/boards/board-magicpanelr2.c diff --git a/arch/sh/boards/mach-rsk7203/setup.c b/arch/sh/boards/board-rsk7203.c similarity index 100% rename from arch/sh/boards/mach-rsk7203/setup.c rename to arch/sh/boards/board-rsk7203.c diff --git a/arch/sh/boards/mach-sh7785lcr/setup.c b/arch/sh/boards/board-sh7785lcr.c similarity index 100% rename from arch/sh/boards/mach-sh7785lcr/setup.c rename to arch/sh/boards/board-sh7785lcr.c diff --git a/arch/sh/boards/mach-shmin/setup.c b/arch/sh/boards/board-shmin.c similarity index 100% rename from arch/sh/boards/mach-shmin/setup.c rename to arch/sh/boards/board-shmin.c diff --git a/arch/sh/boards/mach-ap325rxa/Makefile b/arch/sh/boards/mach-ap325rxa/Makefile deleted file mode 100644 index f663768429f..00000000000 --- a/arch/sh/boards/mach-ap325rxa/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y := setup.o diff --git a/arch/sh/boards/mach-magicpanelr2/Kconfig b/arch/sh/boards/mach-magicpanelr2/Kconfig deleted file mode 100644 index b0abddc3e84..00000000000 --- a/arch/sh/boards/mach-magicpanelr2/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ -if SH_MAGIC_PANEL_R2 - -menu "Magic Panel R2 options" - -config SH_MAGIC_PANEL_R2_VERSION - int SH_MAGIC_PANEL_R2_VERSION - default "3" - help - Set the version of the Magic Panel R2 - -endmenu - -endif diff --git a/arch/sh/boards/mach-magicpanelr2/Makefile b/arch/sh/boards/mach-magicpanelr2/Makefile deleted file mode 100644 index 7a6d586b907..00000000000 --- a/arch/sh/boards/mach-magicpanelr2/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Magic Panel specific parts -# - -obj-y := setup.o \ No newline at end of file diff --git a/arch/sh/boards/mach-rsk7203/Makefile b/arch/sh/boards/mach-rsk7203/Makefile deleted file mode 100644 index f663768429f..00000000000 --- a/arch/sh/boards/mach-rsk7203/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y := setup.o diff --git a/arch/sh/boards/mach-se/7619/Makefile b/arch/sh/boards/mach-se/7619/Makefile deleted file mode 100644 index d21775c28cd..00000000000 --- a/arch/sh/boards/mach-se/7619/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the 7619 SolutionEngine specific parts of the kernel -# - -obj-y := setup.o diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile index ad2b38ef65d..2de42bae4b4 100644 --- a/arch/sh/boards/mach-se/Makefile +++ b/arch/sh/boards/mach-se/Makefile @@ -1,6 +1,7 @@ +obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += board-se7619.o + obj-$(CONFIG_SH_SOLUTION_ENGINE) += 770x/ obj-$(CONFIG_SH_7206_SOLUTION_ENGINE) += 7206/ -obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += 7619/ obj-$(CONFIG_SH_7722_SOLUTION_ENGINE) += 7722/ obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += 7751/ obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/ diff --git a/arch/sh/boards/mach-se/7619/setup.c b/arch/sh/boards/mach-se/board-se7619.c similarity index 100% rename from arch/sh/boards/mach-se/7619/setup.c rename to arch/sh/boards/mach-se/board-se7619.c diff --git a/arch/sh/boards/mach-sh7785lcr/Makefile b/arch/sh/boards/mach-sh7785lcr/Makefile deleted file mode 100644 index 77037567633..00000000000 --- a/arch/sh/boards/mach-sh7785lcr/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y := setup.o diff --git a/arch/sh/boards/mach-shmin/Makefile b/arch/sh/boards/mach-shmin/Makefile deleted file mode 100644 index 3190cc72430..00000000000 --- a/arch/sh/boards/mach-shmin/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the SHMIN board. -# - -obj-y := setup.o -- GitLab From c2697968c012cfdba2d92fa6e27e3e34f918af2f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 00:56:39 +0900 Subject: [PATCH 0231/1024] serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression. As noted by Manuel: Commit c63847a3621d2bac054f5709783860ecabd0ee7e ("sh: Add SCIF2 support for SH7763.") broke build with CONFIG_EARLY_PRINTK enabled for me (SH7760): CC arch/sh/kernel/early_printk.o /mnt/work/sh7760/kernel/linux-2.6.git/arch/sh/kernel/early_printk.c: In function 'scif_sercon_putc': /mnt/work/sh7760/kernel/linux-2.6.git/arch/sh/kernel/early_printk.c:84: error: implicit declaration of function 'sci_SCFDR_in' Move the SH7763 definitions out on their own, so they don't create additional confusion within the SH7760/SH7780/SH7785 block. Restore the deleted SCFDR definition for these parts. Reported-by: Manuel Lauss Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.h | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index cd728df6a01..8a0749e34ca 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -451,19 +451,21 @@ SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8) SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) +SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) SCIF_FNS(SCLSR, 0, 0, 0x28, 16) -#if defined(CONFIG_CPU_SUBTYPE_SH7763) -/* SH7763 SCIF2 */ +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16) -SCIF_FNS(SCLSR2, 0, 0, 0x24, 16) -#endif /* CONFIG_CPU_SUBTYPE_SH7763 */ +SCIF_FNS(SCLSR2, 0, 0, 0x24, 16) +SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) +SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) +SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) +SCIF_FNS(SCLSR, 0, 0, 0x28, 16) #else SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) #if defined(CONFIG_CPU_SUBTYPE_SH7722) -- GitLab From 9b4d10ff247a440d3d4ec130866f7f5b7d1c7c14 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 01:01:08 +0900 Subject: [PATCH 0232/1024] sh: Kill off stray mach-rsk7203 reference. Signed-off-by: Paul Mundt --- arch/sh/Makefile | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 6c93b948713..25659ce74ba 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -113,7 +113,6 @@ machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander machdir-$(CONFIG_SH_MIGOR) += mach-migor machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780 machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto -machdir-$(CONFIG_SH_RSK7203) += mach-rsk7203 machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev machdir-$(CONFIG_SH_LANDISK) += mach-landisk -- GitLab From cc8dccdc74c06ea91e6979130b742fef44e4b0c4 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 02:15:20 +0900 Subject: [PATCH 0233/1024] sh: defconfig updates. Signed-off-by: Paul Mundt --- arch/sh/configs/ap325rxa_defconfig | 35 +- arch/sh/configs/dreamcast_defconfig | 304 +++++--- arch/sh/configs/hp6xx_defconfig | 258 ++++--- arch/sh/configs/landisk_defconfig | 894 ++++++++++------------- arch/sh/configs/lboxre2_defconfig | 725 ++++++++---------- arch/sh/configs/magicpanelr2_defconfig | 195 +++-- arch/sh/configs/microdev_defconfig | 630 ++++++++-------- arch/sh/configs/migor_defconfig | 63 +- arch/sh/configs/r7780mp_defconfig | 194 +++-- arch/sh/configs/r7785rp_defconfig | 258 ++++--- arch/sh/configs/rts7751r2d1_defconfig | 259 ++++--- arch/sh/configs/rts7751r2dplus_defconfig | 259 ++++--- arch/sh/configs/sdk7780_defconfig | 269 ++++--- arch/sh/configs/se7206_defconfig | 38 +- arch/sh/configs/se7343_defconfig | 78 +- arch/sh/configs/se7619_defconfig | 261 +++---- 16 files changed, 2518 insertions(+), 2202 deletions(-) diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig index 5471df53753..29926a9b9ce 100644 --- a/arch/sh/configs/ap325rxa_defconfig +++ b/arch/sh/configs/ap325rxa_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Wed Jun 4 17:30:00 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:18:59 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -79,9 +80,14 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -99,6 +105,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -175,6 +182,7 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -376,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -466,6 +476,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -512,10 +523,10 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -587,6 +598,7 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -620,6 +632,7 @@ CONFIG_HW_RANDOM=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -631,6 +644,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -667,10 +681,6 @@ CONFIG_SSB_POSSIBLE=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set @@ -679,6 +689,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -752,6 +763,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -762,17 +774,16 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -842,6 +853,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -898,6 +910,10 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -937,6 +953,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig index 57728788b75..d4075283956 100644 --- a/arch/sh/configs/dreamcast_defconfig +++ b/arch/sh/configs/dreamcast_defconfig @@ -1,9 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc7 -# Fri Sep 21 15:46:27 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:34:24 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -19,6 +21,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -37,12 +40,15 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -55,21 +61,38 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -80,6 +103,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -93,13 +117,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -108,6 +136,7 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set CONFIG_CPU_SUBTYPE_SH7091=y # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -116,14 +145,17 @@ CONFIG_CPU_SUBTYPE_SH7091=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -133,6 +165,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x01000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -142,12 +175,15 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -155,6 +191,8 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -194,6 +232,7 @@ CONFIG_SH_PCLK_FREQ=49876504 # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -204,7 +243,10 @@ CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -239,12 +281,15 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -263,10 +308,7 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -291,6 +333,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -309,6 +352,7 @@ CONFIG_IP_FIB_HASH=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -316,8 +360,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -334,10 +376,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -345,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -366,6 +405,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -374,6 +414,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y +CONFIG_GDROM=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -384,11 +425,15 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -400,44 +445,49 @@ CONFIG_MISC_DEVICES=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set # -# Fusion MPT device support +# IEEE 1394 (FireWire) support # -# CONFIG_FUSION is not set # -# IEEE 1394 (FireWire) support +# Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -449,6 +499,7 @@ CONFIG_8139TOO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -464,12 +515,12 @@ CONFIG_8139TOO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -491,7 +542,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -505,6 +555,8 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_MAPLE is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set @@ -530,10 +582,13 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -553,6 +608,19 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -568,45 +636,40 @@ CONFIG_SH_WDT=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set -CONFIG_HW_RANDOM=y -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -# CONFIG_I2C is not set # -# SPI support +# Sonics Silicon Backplane # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y @@ -615,11 +678,12 @@ CONFIG_FIRMWARE_EDID=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -653,7 +717,15 @@ CONFIG_FB_PVR2=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SH_MOBILE_LCDC is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -680,49 +752,30 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -735,14 +788,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -771,7 +821,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -786,14 +835,14 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -807,35 +856,25 @@ CONFIG_RAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -CONFIG_PROFILING=y -# CONFIG_OPROFILE is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_SH_KGDB is not set @@ -845,14 +884,95 @@ CONFIG_ENABLE_MUST_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig index 756d38dc2f7..41e25b3a5b0 100644 --- a/arch/sh/configs/hp6xx_defconfig +++ b/arch/sh/configs/hp6xx_defconfig @@ -1,9 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Tue Sep 11 19:42:44 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:24:57 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -20,6 +22,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -34,12 +37,15 @@ CONFIG_SWAP=y # CONFIG_SYSVIPC is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_USER_NS is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -52,6 +58,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -64,6 +71,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -73,6 +93,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -86,13 +107,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -101,6 +126,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -109,14 +135,17 @@ CONFIG_CPU_SUBTYPE_SH7709=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -126,6 +155,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0d000000 CONFIG_MEMORY_SIZE=0x00400000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -135,7 +165,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -143,6 +175,8 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -181,6 +215,7 @@ CONFIG_SH_PCLK_FREQ=22110000 # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -219,11 +254,14 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -237,10 +275,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_ISA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -263,11 +297,12 @@ CONFIG_BINFMT_ELF=y # # Power management options (EXPERIMENTAL) # +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM=y -CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=y # @@ -282,9 +317,12 @@ CONFIG_APM_EMULATION=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set @@ -294,8 +332,11 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -332,6 +373,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AIC7XXX_OLD is not set @@ -342,14 +384,17 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set # CONFIG_PATA_LEGACY is not set # CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_QDI is not set @@ -370,11 +415,9 @@ CONFIG_INPUT_POLLDEV=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=y -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set # # Input Device Drivers @@ -387,6 +430,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_HP6XX=y +# CONFIG_KEYBOARD_SH_KEYSC is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -395,12 +439,15 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set CONFIG_TOUCHSCREEN_HP600=y +# CONFIG_TOUCHSCREEN_HTCPEN is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_INPUT_MISC is not set # @@ -417,9 +464,11 @@ CONFIG_SERIO=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -439,7 +488,6 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=64 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -454,39 +502,45 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_HP680=y +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y @@ -495,11 +549,12 @@ CONFIG_FIRMWARE_EDID=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -511,7 +566,20 @@ CONFIG_FB_DEFERRED_IO=y # # CONFIG_FB_S1D13XXX is not set CONFIG_FB_HIT=y +CONFIG_FB_SH_MOBILE_LCDC=y # CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_HP680=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -533,15 +601,13 @@ CONFIG_FONT_PEARL_8x8=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -564,9 +630,10 @@ CONFIG_RTC_INTF_DEV=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -575,23 +642,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -606,13 +657,10 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -643,7 +691,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -658,8 +705,11 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set @@ -668,10 +718,6 @@ CONFIG_RAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -713,23 +759,22 @@ CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_SH_KGDB is not set @@ -739,50 +784,95 @@ CONFIG_ENABLE_MUST_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig index 38f934ab50c..99cc39c5c6c 100644 --- a/arch/sh/configs/landisk_defconfig +++ b/arch/sh/configs/landisk_defconfig @@ -1,44 +1,53 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Thu Dec 7 17:13:04 2006 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:35:07 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -50,34 +59,48 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -91,67 +114,26 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -CONFIG_SH_LANDISK=y -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -160,53 +142,60 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -214,19 +203,32 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y # -# Timer support +# Board support +# +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_RTS7751R2D is not set +CONFIG_SH_LANDISK=y +# CONFIG_SH_TITAN is not set +# CONFIG_SH_LBOX_RE2 is not set + +# +# Timer and clock configuration # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=33333333 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -241,12 +243,11 @@ CONFIG_SH_PCLK_FREQ=33333333 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set -CONFIG_HEARTBEAT=y # # Additional SuperH Device Drivers # +CONFIG_HEARTBEAT=y # CONFIG_PUSH_SWITCH is not set # @@ -254,13 +255,17 @@ CONFIG_HEARTBEAT=y # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -273,16 +278,12 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # -CONFIG_ISA=y CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -301,28 +302,15 @@ CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_I82365 is not set -# CONFIG_TCIC is not set -CONFIG_PCMCIA_PROBE=y CONFIG_PCCARD_NONSTATIC=y - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - # # Networking # @@ -331,13 +319,14 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -364,49 +353,36 @@ CONFIG_IP_PNP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set - -# -# IP: Virtual Server Configuration -# # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_QUEUE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -421,10 +397,6 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -432,9 +404,20 @@ CONFIG_ATALK=m # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -443,35 +426,17 @@ CONFIG_ATALK=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -484,63 +449,66 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set # CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_IDEPCI_PCIBUS_ORDER=y CONFIG_BLK_DEV_OFFBOARD=y CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -CONFIG_IDEDMA_ONLYDISK=y CONFIG_BLK_DEV_AEC62XX=y # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -550,18 +518,15 @@ CONFIG_BLK_DEV_AEC62XX=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set +# CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -583,6 +548,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -590,77 +556,43 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -671,76 +603,49 @@ CONFIG_MD_RAID1=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# Enable only one of the two stacks, unless you know what you are doing # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set -# CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set # CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -748,18 +653,20 @@ CONFIG_NET_PCI=y # CONFIG_NE2K_PCI is not set CONFIG_8139CP=y # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -767,58 +674,53 @@ CONFIG_8139CP=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) +# Wireless LAN # -# CONFIG_NET_RADIO is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # -# PCMCIA network device support +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +# CONFIG_USB_USBNET is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -826,6 +728,7 @@ CONFIG_8139CP=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -835,7 +738,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -845,6 +747,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -858,10 +761,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -880,22 +786,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # # PCMCIA character devices @@ -903,65 +797,77 @@ CONFIG_HW_RANDOM=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y # -# Video Capture Adapters +# Multimedia core support # +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m # -# Video Capture Adapters +# Multimedia drivers # +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_STRADIS is not set - -# -# V4L USB devices -# +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VIDEO_CLASS is not set +# CONFIG_USB_GSPCA is not set CONFIG_VIDEO_USBVIDEO=m CONFIG_USB_VICAM=m CONFIG_USB_IBMCAM=m @@ -975,106 +881,100 @@ CONFIG_USB_STV680=m # CONFIG_USB_ZC0301 is not set CONFIG_USB_PWC=m # CONFIG_USB_PWC_DEBUG is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_CADET is not set -# CONFIG_RADIO_RTRACK is not set -# CONFIG_RADIO_RTRACK2 is not set -# CONFIG_RADIO_AZTECH is not set -# CONFIG_RADIO_GEMTEK is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set -# CONFIG_RADIO_SF16FMI is not set -# CONFIG_RADIO_SF16FMR2 is not set -# CONFIG_RADIO_TERRATEC is not set -# CONFIG_RADIO_TRUST is not set -# CONFIG_RADIO_TYPHOON is not set -# CONFIG_RADIO_ZOLTRIX is not set CONFIG_USB_DSBR=m +# CONFIG_USB_SI470X is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set -CONFIG_USB_DABUSB=m +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # -# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FONT_8x16=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# # CONFIG_SND is not set +CONFIG_SOUND_PRIME=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# Open Sound System +# USB Input Devices # -CONFIG_SOUND_PRIME=m -# CONFIG_OSS_OBSOLETE_DRIVER is not set -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_ES1371 is not set -# CONFIG_SOUND_ICH is not set -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set # -# USB support +# USB HID Boot Protocol drivers # +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1094,66 +994,28 @@ CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set -# -# USB Input Devices -# -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set @@ -1168,6 +1030,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set @@ -1175,8 +1038,11 @@ CONFIG_USB_SERIAL_FTDI_SIO=m # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set @@ -1197,6 +1063,7 @@ CONFIG_USB_EMI26=m # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1208,61 +1075,18 @@ CONFIG_USB_SISUSBVGA=m CONFIG_USB_SISUSBVGA_CON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -1276,7 +1100,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set @@ -1285,14 +1108,11 @@ CONFIG_REISERFS_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1328,7 +1148,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1343,26 +1162,24 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m @@ -1376,17 +1193,12 @@ CONFIG_SMB_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1427,46 +1239,128 @@ CONFIG_NLS_CODEPAGE_932=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set -# CONFIG_KGDB is not set +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Cryptographic options +# Compression # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig index b68b6cdbb78..aecdfd33c69 100644 --- a/arch/sh/configs/lboxre2_defconfig +++ b/arch/sh/configs/lboxre2_defconfig @@ -1,9 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc4 -# Sat Mar 24 22:04:27 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:39:41 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -11,37 +13,40 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -54,34 +59,48 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -95,66 +114,26 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_HIGHLANDER is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -CONFIG_SH_LBOX_RE2=y -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -163,55 +142,60 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -219,12 +203,21 @@ CONFIG_ZONE_DMA_FLAG=0 CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +CONFIG_SH_LBOX_RE2=y # # Timer and clock configuration @@ -232,6 +225,10 @@ CONFIG_CPU_HAS_PTEA=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=40000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -246,7 +243,6 @@ CONFIG_SH_PCLK_FREQ=40000000 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers @@ -262,11 +258,14 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -280,15 +279,12 @@ CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1" # # Bus options # -CONFIG_ISA=y CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_PCCARD=y CONFIG_PCMCIA_DEBUG=y CONFIG_PCMCIA=y @@ -306,28 +302,15 @@ CONFIG_YENTA_O2=y # CONFIG_YENTA_TOSHIBA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_I82365 is not set -# CONFIG_TCIC is not set -CONFIG_PCMCIA_PROBE=y CONFIG_PCCARD_NONSTATIC=y - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - # # Networking # @@ -336,7 +319,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -344,6 +326,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -370,29 +353,26 @@ CONFIG_IP_PNP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set - -# -# IP: Virtual Server Configuration -# # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set # @@ -401,20 +381,8 @@ CONFIG_NETFILTER=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -427,10 +395,6 @@ CONFIG_NETFILTER=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -438,9 +402,20 @@ CONFIG_NETFILTER=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -449,36 +424,17 @@ CONFIG_NETFILTER=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -490,19 +446,18 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -510,6 +465,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -531,6 +487,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -538,71 +495,49 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -612,7 +547,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -622,6 +556,7 @@ CONFIG_ATA=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set @@ -635,18 +570,18 @@ CONFIG_ATA=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_QDI is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set @@ -656,88 +591,52 @@ CONFIG_ATA=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_WINBOND_VLB is not set CONFIG_PATA_PLATFORM=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# Enable only one of the two stacks, unless you know what you are doing # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set -# CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set # CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -749,19 +648,20 @@ CONFIG_8139TOO_PIO=y CONFIG_8139TOO_TUNE_TWISTER=y # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -769,36 +669,33 @@ CONFIG_8139TOO_TUNE_TWISTER=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_ATL1E is not set +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_3C589 is not set # CONFIG_PCMCIA_3C574 is not set @@ -808,29 +705,16 @@ CONFIG_PCMCIA_PCNET=y # CONFIG_PCMCIA_SMC91C92 is not set # CONFIG_PCMCIA_XIRC2PS is not set # CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -838,6 +722,7 @@ CONFIG_PCMCIA_PCNET=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -847,7 +732,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -857,6 +741,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -870,10 +755,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -892,22 +780,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # # PCMCIA character devices @@ -915,125 +791,104 @@ CONFIG_HW_RANDOM=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Console display driver support +# Display device support # -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y +# CONFIG_DISPLAY_SUPPORT is not set # -# Sound +# Console display driver support # +CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1047,37 +902,29 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set - -# -# RTC drivers -# -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_SH is not set # CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# # -# DMA Devices +# SPI RTC drivers # # -# Auxiliary Display support +# Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Virtualization +# on-CPU RTC drivers # +# CONFIG_RTC_DRV_SH is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -1091,20 +938,16 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1136,7 +979,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1151,14 +993,14 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -1166,17 +1008,12 @@ CONFIG_RAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1217,30 +1054,24 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set @@ -1251,20 +1082,100 @@ CONFIG_SH_STANDARD_BIOS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Cryptographic options +# Compression # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig index f8398a5f10e..a3a80f3d27c 100644 --- a/arch/sh/configs/magicpanelr2_defconfig +++ b/arch/sh/configs/magicpanelr2_defconfig @@ -1,9 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Fri Aug 17 12:15:16 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:41:08 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -18,6 +20,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -35,12 +38,16 @@ CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set CONFIG_AUDIT=y +# CONFIG_AUDITSYSCALL is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -48,6 +55,7 @@ CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -55,6 +63,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -67,10 +76,24 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y @@ -81,6 +104,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -94,13 +118,17 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y # # System type # CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -109,6 +137,7 @@ CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set CONFIG_CPU_SUBTYPE_SH7720=y +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -117,14 +146,17 @@ CONFIG_CPU_SUBTYPE_SH7720=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -134,6 +166,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0C000000 CONFIG_MEMORY_SIZE=0x03F00000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -143,7 +176,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -151,6 +186,8 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -173,7 +210,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SH_DSP=y CONFIG_SH_ADC=y CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_DSP=y @@ -196,6 +232,7 @@ CONFIG_SH_PCLK_FREQ=24000000 # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -228,11 +265,14 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -245,10 +285,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # Bus options # # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -289,6 +325,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -296,8 +333,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -314,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -325,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -346,9 +378,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -362,6 +397,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -374,6 +410,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -408,7 +445,6 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x0000000 CONFIG_MTD_PHYSMAP_LEN=0 CONFIG_MTD_PHYSMAP_BANKWIDTH=0 -# CONFIG_MTD_SOLUTIONENGINE is not set # CONFIG_MTD_PLATRAM is not set # @@ -440,11 +476,14 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -457,18 +496,24 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_SMC91X is not set CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -477,10 +522,10 @@ CONFIG_SMC911X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -502,7 +547,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -516,6 +560,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set @@ -539,9 +584,11 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -569,60 +616,72 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set @@ -644,9 +703,10 @@ CONFIG_RTC_INTF_DEV=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -655,23 +715,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -684,18 +728,14 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -724,7 +764,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -744,30 +783,29 @@ CONFIG_JFFS2_FS_DEBUG=0 # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -CONFIG_SUNRPC_BIND34=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -781,10 +819,6 @@ CONFIG_SUNRPC_BIND34=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=y @@ -825,23 +859,16 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -852,6 +879,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -866,11 +894,16 @@ CONFIG_DEBUG_KOBJECT=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000 @@ -879,6 +912,7 @@ CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set CONFIG_SH_KGDB=y # @@ -904,14 +938,17 @@ CONFIG_KGDB_DEFBITS_8=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig index e89d951c3c1..e4b900e72dc 100644 --- a/arch/sh/configs/microdev_defconfig +++ b/arch/sh/configs/microdev_defconfig @@ -1,28 +1,35 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:27:01 2006 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:47:16 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y @@ -31,10 +38,16 @@ CONFIG_SWAP=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -47,29 +60,42 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# # CONFIG_MODULES is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -83,59 +109,26 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -CONFIG_SH_SH4202_MICRODEV=y -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -144,67 +137,94 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set CONFIG_CPU_SUBTYPE_SH4_202=y - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -CONFIG_SH_WRITETHROUGH=y -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y # -# Timer support +# Board support +# +CONFIG_SH_SH4202_MICRODEV=y + +# +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=66000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -214,6 +234,7 @@ CONFIG_SH_PCLK_FREQ=66000000 # # DMA support # +CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y CONFIG_NR_ONCHIP_DMA_CHANNELS=4 # CONFIG_NR_DMA_CHANNELS_BOOL is not set @@ -221,22 +242,30 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -251,29 +280,15 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1" # Bus options # CONFIG_SUPERHYWAY=y -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set -# -# PCI Hotplug Support -# - # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - # # Networking # @@ -282,12 +297,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set # CONFIG_UNIX is not set CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -308,30 +324,19 @@ CONFIG_IP_PNP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -344,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -355,9 +356,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -366,159 +378,96 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=1 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -536,6 +485,7 @@ CONFIG_SMC91X=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -554,143 +504,93 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# - -# -# Hardware Monitoring support -# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -702,20 +602,18 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -747,7 +645,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -762,21 +659,20 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -789,17 +685,12 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -840,76 +731,127 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Hardware crypto devices +# Compression # +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index 287408b2ace..c4b3e1d8950 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Thu May 22 14:30:07 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:44:41 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -77,9 +78,14 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -90,12 +96,13 @@ CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -173,7 +180,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -216,6 +225,8 @@ CONFIG_CPU_HAS_DSP=y # # CONFIG_SH_7722_SOLUTION_ENGINE is not set CONFIG_SH_MIGOR=y +CONFIG_SH_MIGOR_QVGA=y +# CONFIG_SH_MIGOR_RTA_WVGA is not set # # Timer and clock configuration @@ -362,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -378,6 +390,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -475,6 +489,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -521,10 +536,10 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -537,6 +552,7 @@ CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -602,6 +618,7 @@ CONFIG_KEYBOARD_SH_KEYSC=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -636,21 +653,35 @@ CONFIG_I2C_BOARDINFO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_SH_MOBILE=y # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set -CONFIG_I2C_SH_MOBILE=y +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -663,6 +694,7 @@ CONFIG_I2C_SH_MOBILE=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -674,6 +706,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -710,10 +743,6 @@ CONFIG_SSB_POSSIBLE=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -738,7 +767,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_PXA25X is not set CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y CONFIG_SUPERH_BUILT_IN_M66592=y @@ -757,6 +786,7 @@ CONFIG_USB_GADGET_DUALSPEED=y CONFIG_USB_G_SERIAL=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -790,6 +820,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -810,6 +841,7 @@ CONFIG_RTC_DRV_RS5C372=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -870,6 +902,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -899,6 +932,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -955,6 +989,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -994,6 +1032,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig index 1a072615ffd..57a30079758 100644 --- a/arch/sh/configs/r7780mp_defconfig +++ b/arch/sh/configs/r7780mp_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc4 -# Thu Mar 6 15:39:59 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:51:13 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -84,13 +85,20 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -101,6 +109,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -115,7 +124,6 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System type @@ -126,6 +134,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -143,6 +152,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set CONFIG_CPU_SUBTYPE_SH7780=y @@ -173,7 +183,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -188,6 +200,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -268,7 +281,7 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_RCU_TRACE=y +# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -348,14 +361,13 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +CONFIG_STP=m CONFIG_BRIDGE=m # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -384,6 +396,7 @@ CONFIG_LLC=m # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -400,6 +413,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -420,12 +435,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set CONFIG_EEPROM_93CX6=y # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -499,9 +516,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -511,7 +532,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -556,17 +576,21 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -585,6 +609,7 @@ CONFIG_AX88796_93CX6=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -593,7 +618,6 @@ CONFIG_AX88796_93CX6=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m -# CONFIG_PCNET32_NAPI is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set @@ -616,32 +640,28 @@ CONFIG_8139TOO_8129=y # CONFIG_TLAN is not set CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y -# CONFIG_VIA_RHINE_NAPI is not set # CONFIG_SC92031 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -654,6 +674,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -661,6 +682,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -701,6 +723,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -722,6 +745,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -750,12 +774,7 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -776,6 +795,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -787,13 +807,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -809,24 +840,9 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# # CONFIG_SND is not set - -# -# Open Sound System -# CONFIG_SOUND_PRIME=m -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -836,6 +852,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -844,6 +862,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -879,10 +898,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -903,7 +919,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -957,6 +972,7 @@ CONFIG_CONFIGFS_FS=m # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -967,20 +983,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1043,6 +1056,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1050,9 +1064,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1066,6 +1083,8 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set @@ -1091,51 +1110,84 @@ CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1144,8 +1196,10 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig index 0dc1ce7b934..1d09d24d429 100644 --- a/arch/sh/configs/r7785rp_defconfig +++ b/arch/sh/configs/r7785rp_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc3 -# Fri Nov 23 14:03:57 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 00:59:19 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -21,6 +22,8 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_IO_TRAPPED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -39,18 +42,16 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -64,20 +65,37 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -88,6 +106,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -101,6 +120,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y # # System type @@ -109,7 +129,10 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -118,6 +141,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -126,12 +150,15 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set CONFIG_CPU_SUBTYPE_SH7785=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -157,7 +184,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set # CONFIG_HUGETLB_PAGE_SIZE_256K is not set CONFIG_HUGETLB_PAGE_SIZE_1MB=y @@ -173,6 +202,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set # CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -202,6 +232,7 @@ CONFIG_CPU_HAS_FPU=y # Board support # CONFIG_SH_HIGHLANDER=y +# CONFIG_SH_SH7785LCR is not set # CONFIG_SH_R7780RP is not set # CONFIG_SH_R7780MP is not set CONFIG_SH_R7785RP=y @@ -245,12 +276,13 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -295,6 +327,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -329,14 +362,13 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +CONFIG_STP=m CONFIG_BRIDGE=m # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -355,6 +387,7 @@ CONFIG_LLC=m # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -364,6 +397,7 @@ CONFIG_LLC=m # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -380,6 +414,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -397,14 +433,18 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set CONFIG_EEPROM_93CX6=y # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -464,6 +504,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -476,9 +517,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -488,7 +533,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -517,6 +561,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -532,24 +577,27 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -576,20 +624,21 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -601,6 +650,8 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -608,13 +659,13 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -649,6 +700,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -670,7 +722,9 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -697,12 +751,7 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -722,6 +771,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -733,13 +784,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -751,15 +813,15 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -792,6 +854,8 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -800,24 +864,9 @@ CONFIG_FB_DEFERRED_IO=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_LOGO is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# # CONFIG_SND is not set - -# -# Open Sound System -# CONFIG_SOUND_PRIME=m -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -827,17 +876,17 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -861,9 +910,10 @@ CONFIG_RTC_INTF_DEV=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -872,10 +922,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -896,14 +943,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m @@ -951,8 +995,11 @@ CONFIG_CONFIGFS_FS=m # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -960,20 +1007,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1028,10 +1072,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1040,6 +1080,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1050,6 +1091,7 @@ CONFIG_DEBUG_KERNEL=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_SPINLOCK=y @@ -1066,12 +1108,14 @@ CONFIG_STACKTRACE=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y @@ -1091,54 +1135,96 @@ CONFIG_4KSTACKS=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig index 3a915fd436d..8413236c1b3 100644 --- a/arch/sh/configs/rts7751r2d1_defconfig +++ b/arch/sh/configs/rts7751r2d1_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24 -# Thu Feb 7 16:25:55 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:55:52 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_IO_TRAPPED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -76,22 +77,31 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System type @@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -170,6 +184,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -256,7 +271,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_GUSA=y # CONFIG_GUSA_RB is not set @@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set @@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -490,7 +514,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -535,17 +558,21 @@ CONFIG_ATA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -564,6 +591,7 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -690,9 +719,11 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -765,6 +792,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -862,15 +904,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set CONFIG_SND_YMFPCI=m -CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# SPI devices -# - -# -# SUPERH devices -# - -# -# USB devices -# +CONFIG_SND_SPI=y +CONFIG_SND_SUPERH=y +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# Open Sound System -# CONFIG_SOUND_PRIME=m -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y # @@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_RS5C348 is not set @@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SH is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig index 0a6d3b9e648..7d9fa6e9ded 100644 --- a/arch/sh/configs/rts7751r2dplus_defconfig +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24 -# Thu Feb 7 16:17:47 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:59:18 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_IO_TRAPPED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -76,22 +77,31 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System type @@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -170,6 +184,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -256,7 +271,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_GUSA=y # CONFIG_GUSA_RB is not set @@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set @@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -490,7 +514,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -535,17 +558,21 @@ CONFIG_ATA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -564,6 +591,7 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -690,9 +719,11 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -765,6 +792,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -862,15 +904,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set CONFIG_SND_YMFPCI=m -CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# SPI devices -# - -# -# SUPERH devices -# - -# -# USB devices -# +CONFIG_SND_SPI=y +CONFIG_SND_SUPERH=y +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# Open Sound System -# CONFIG_SOUND_PRIME=m -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y # @@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_RS5C348 is not set @@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SH is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig index bb9bcd6591a..6d834f24290 100644 --- a/arch/sh/configs/sdk7780_defconfig +++ b/arch/sh/configs/sdk7780_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc7 -# Tue Jan 22 11:34:03 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 02:00:12 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -20,6 +21,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -38,24 +40,23 @@ CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -63,11 +64,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -75,11 +78,24 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set @@ -90,6 +106,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -103,6 +120,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type @@ -113,6 +131,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -130,6 +149,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set CONFIG_CPU_SUBTYPE_SH7780=y @@ -137,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -159,7 +180,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -174,6 +197,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=0 @@ -205,7 +229,6 @@ CONFIG_CPU_HAS_FPU=y # CONFIG_SH_7780_SOLUTION_ENGINE is not set CONFIG_SH_SDK7780=y # CONFIG_SH_HIGHLANDER is not set -# CONFIG_SH_SDK7780_STANDALONE is not set CONFIG_SH_SDK7780_BASE=y # @@ -250,12 +273,13 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -321,6 +345,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -370,8 +395,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -397,7 +424,6 @@ CONFIG_NET_SCHED=y # CONFIG_NET_SCH_HTB is not set # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_PRIO is not set -# CONFIG_NET_SCH_RR is not set # CONFIG_NET_SCH_RED is not set # CONFIG_NET_SCH_SFQ is not set # CONFIG_NET_SCH_TEQL is not set @@ -405,7 +431,6 @@ CONFIG_NET_SCHED=y # CONFIG_NET_SCH_GRED is not set # CONFIG_NET_SCH_DSMARK is not set # CONFIG_NET_SCH_NETEM is not set -# CONFIG_NET_SCH_INGRESS is not set # # Classification @@ -417,9 +442,9 @@ CONFIG_NET_SCHED=y # CONFIG_NET_CLS_U32 is not set # CONFIG_NET_CLS_RSVP is not set # CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set -# CONFIG_NET_CLS_POLICE is not set CONFIG_NET_SCH_FIFO=y # @@ -427,6 +452,7 @@ CONFIG_NET_SCH_FIFO=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -452,6 +478,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -475,16 +503,18 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -492,6 +522,7 @@ CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set @@ -501,14 +532,12 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_PLATFORM=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -518,10 +547,8 @@ CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -537,10 +564,7 @@ CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -613,9 +638,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -625,7 +654,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -654,6 +682,7 @@ CONFIG_ATA=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -670,6 +699,7 @@ CONFIG_ATA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_DM=y @@ -686,11 +716,14 @@ CONFIG_BLK_DEV_DM=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -708,6 +741,7 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -726,6 +760,7 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -743,7 +778,6 @@ CONFIG_SMC91X=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y @@ -780,6 +814,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -812,10 +847,13 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -847,22 +885,20 @@ CONFIG_HW_RANDOM=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -870,8 +906,10 @@ CONFIG_POWER_SUPPLY=y # CONFIG_SSB_POSSIBLE=y CONFIG_SSB=y +CONFIG_SSB_SPROM=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y +# CONFIG_SSB_B43_PCI_BRIDGE is not set CONFIG_SSB_PCMCIAHOST_POSSIBLE=y # CONFIG_SSB_PCMCIAHOST is not set # CONFIG_SSB_SILENT is not set @@ -882,13 +920,24 @@ CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -900,15 +949,15 @@ CONFIG_SSB_DRIVER_PCICORE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -941,6 +990,8 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -970,24 +1021,9 @@ CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_SUPERH_MONO=y CONFIG_LOGO_SUPERH_VGA16=y CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# # CONFIG_SND is not set - -# -# Open Sound System -# CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -1006,6 +1042,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1014,15 +1051,18 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1033,6 +1073,7 @@ CONFIG_USB_EHCI_HCD=y # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1054,6 +1095,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1067,10 +1109,6 @@ CONFIG_USB_MON=y # USB port drivers # # CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1096,16 +1134,10 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1117,13 +1149,11 @@ CONFIG_LEDS_CLASS=y # LED Triggers # # CONFIG_LEDS_TRIGGERS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1145,14 +1175,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1203,8 +1230,11 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1212,19 +1242,16 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1279,7 +1306,6 @@ CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1288,6 +1314,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y # CONFIG_DEBUG_FS is not set @@ -1295,10 +1322,14 @@ CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1313,12 +1344,14 @@ CONFIG_DEBUG_PREEMPT=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y @@ -1338,52 +1371,94 @@ CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index 6b34baa26ea..af15cbef12b 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Tue Jun 3 20:27:08 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 02:06:07 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -87,9 +88,14 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 @@ -99,12 +105,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -175,7 +182,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -294,6 +303,7 @@ CONFIG_CF_BASE_ADDR=0xb8000000 # # Executable file formats # +CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y @@ -487,6 +497,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y CONFIG_EEPROM_93CX6=y # CONFIG_ENCLOSURE_SERVICES is not set @@ -503,7 +514,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -516,6 +526,7 @@ CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -583,6 +594,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -594,6 +606,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -625,10 +638,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -669,6 +678,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -728,6 +738,7 @@ CONFIG_CONFIGFS_FS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y @@ -738,13 +749,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -776,6 +786,8 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -795,6 +807,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_VM=y # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -860,6 +873,10 @@ CONFIG_CRYPTO_ALGAPI=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -899,6 +916,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index 7b727363844..4e30b70377e 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Mon Jul 7 13:12:45 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 02:08:38 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -77,9 +78,14 @@ CONFIG_SLAB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_TINY_SHMEM=y @@ -90,12 +96,13 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -171,6 +178,7 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -368,6 +376,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -455,6 +465,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -497,10 +508,10 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -513,13 +524,13 @@ CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # @@ -572,6 +583,7 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -617,6 +629,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -646,6 +659,7 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_RADIO_ADAPTERS=y # CONFIG_DAB is not set @@ -657,9 +671,9 @@ CONFIG_RADIO_ADAPTERS=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set @@ -676,6 +690,7 @@ CONFIG_FIRMWARE_EDID=y # Frame buffer hardware drivers # # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -690,15 +705,7 @@ CONFIG_FIRMWARE_EDID=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set # CONFIG_LOGO is not set - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -714,40 +721,14 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# SUPERH devices -# - -# -# System on Chip audio support -# +CONFIG_SND_SUPERH=y # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -759,6 +740,7 @@ CONFIG_HID=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -836,6 +818,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -854,7 +837,6 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -885,6 +867,7 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -941,6 +924,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -980,6 +967,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig index 3a3c3c1f507..80c1c72edb5 100644 --- a/arch/sh/configs/se7619_defconfig +++ b/arch/sh/configs/se7619_defconfig @@ -1,9 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc4 -# Fri Jun 15 19:43:06 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 02:12:32 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -17,27 +19,26 @@ CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SYSVIPC is not set # CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_UTS_NS is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -49,6 +50,7 @@ CONFIG_EMBEDDED=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set CONFIG_ANON_INODES=y @@ -60,20 +62,26 @@ CONFIG_EVENTFD=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_SLABINFO=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 - -# -# Loadable module support -# # CONFIG_MODULES is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -87,14 +95,17 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y # # System type # CONFIG_CPU_SH2=y CONFIG_CPU_SUBTYPE_SH7619=y +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -102,6 +113,8 @@ CONFIG_CPU_SUBTYPE_SH7619=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -110,14 +123,17 @@ CONFIG_CPU_SUBTYPE_SH7619=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -126,6 +142,7 @@ CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y @@ -134,7 +151,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -142,6 +161,8 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -151,7 +172,9 @@ CONFIG_NR_QUICK=2 # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -CONFIG_SH_WRITETHROUGH=y +# CONFIG_CACHE_WRITEBACK is not set +CONFIG_CACHE_WRITETHROUGH=y +# CONFIG_CACHE_OFF is not set # # Processor features @@ -159,8 +182,6 @@ CONFIG_SH_WRITETHROUGH=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_SH_FPU_EMU is not set -# CONFIG_SH_DSP is not set -CONFIG_CPU_HAS_IPR_IRQ=y # # Board support @@ -185,7 +206,6 @@ CONFIG_SH_CLK_MD=5 # # DMA support # -# CONFIG_SH_DMA is not set # # Companion Chips @@ -205,11 +225,13 @@ CONFIG_HZ_100=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y # # Boot options @@ -221,15 +243,13 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # +# CONFIG_CF_ENABLER is not set # CONFIG_ARCH_SUPPORTS_MSI is not set -# -# PCCARD (PCMCIA/CardBus) support -# - # # Executable file formats # +CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set @@ -250,10 +270,6 @@ CONFIG_BINFMT_ZFLAT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y @@ -263,6 +279,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -275,6 +292,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -334,29 +352,17 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# Misc devices -# -# CONFIG_BLINK is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -364,21 +370,10 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# ISDN subsystem -# - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -386,13 +381,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -416,6 +411,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -433,123 +429,84 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # -# CONFIG_W1 is not set -# CONFIG_HWMON is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set -CONFIG_DAB=y +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_DAB=y # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -561,12 +518,9 @@ CONFIG_HID=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -592,7 +546,6 @@ CONFIG_PROC_SYSCTL=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # # Miscellaneous filesystems @@ -607,8 +560,11 @@ CONFIG_RAMFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set @@ -617,28 +573,23 @@ CONFIG_RAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -646,20 +597,20 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # Security options # # CONFIG_KEYS is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y -- GitLab From 193f3c2f1531ec9755a87a33038fba3ee29f6ca5 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 02:16:12 +0900 Subject: [PATCH 0234/1024] video: Fix up hp6xx driver build regressions. This is some more fallout from the header reorganization, fix up the paths accordingly. Signed-off-by: Paul Mundt --- drivers/video/backlight/hp680_bl.c | 2 +- drivers/video/hitfb.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c index fbea2bd129c..6fa0b9d5559 100644 --- a/drivers/video/backlight/hp680_bl.c +++ b/drivers/video/backlight/hp680_bl.c @@ -18,7 +18,7 @@ #include #include -#include +#include #include #include diff --git a/drivers/video/hitfb.c b/drivers/video/hitfb.c index 392a8be6aa7..e6467cf9f19 100644 --- a/drivers/video/hitfb.c +++ b/drivers/video/hitfb.c @@ -27,7 +27,7 @@ #include #include #include -#include +#include #define WIDTH 640 -- GitLab From 7cb93181629c613ee2b8f4ffe3446f8003074842 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 30 Jul 2008 02:18:26 +0900 Subject: [PATCH 0235/1024] mm/hugetlb.c must #include This patch fixes the following build error on sh caused by commit aa888a74977a8f2120ae9332376e179c39a6b07d (hugetlb: support larger than MAX_ORDER): <-- snip --> ... CC mm/hugetlb.o /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/hugetlb.c: In function 'alloc_bootmem_huge_page': /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/hugetlb.c:958: error: implicit declaration of function 'virt_to_phys' make[2]: *** [mm/hugetlb.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- mm/hugetlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 3be79dc18c5..b3c78640b62 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -16,7 +16,7 @@ #include #include #include - +#include #include #include -- GitLab From 605a0bd66d9d55e9ba46da1a9e5140c68bdf6d85 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 15 Jul 2008 10:10:01 +0200 Subject: [PATCH 0236/1024] mac80211: remove IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE flag I forgot this in the previous patch that made it unused. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 3 +-- drivers/net/wireless/b43legacy/main.c | 3 +-- drivers/net/wireless/iwlwifi/iwl-core.c | 3 +-- drivers/net/wireless/iwlwifi/iwl3945-base.c | 3 +-- drivers/net/wireless/rt2x00/rt2500usb.c | 1 - drivers/net/wireless/rt2x00/rt61pci.c | 1 - drivers/net/wireless/rt2x00/rt73usb.c | 1 - drivers/net/wireless/zd1211rw/zd_mac.c | 1 - include/net/mac80211.h | 1 - 9 files changed, 4 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index e78319aa47c..3bf3a869361 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4645,8 +4645,7 @@ static int b43_wireless_init(struct ssb_device *dev) } /* fill hw info */ - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_RX_INCLUDES_FCS | + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index a1b8bf3ee73..cb5ad4f7fb2 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3702,8 +3702,7 @@ static int b43legacy_wireless_init(struct ssb_device *dev) } /* fill hw info */ - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_RX_INCLUDES_FCS | + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; hw->queues = 1; /* FIXME: hardware has more queues */ diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index a44188bf445..e3427c205cc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -818,8 +818,7 @@ int iwl_setup_mac(struct iwl_priv *priv) hw->rate_control_algorithm = "iwl-4965-rs"; /* Tell mac80211 our characteristics */ - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_SIGNAL_DBM | + hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; /* Default value; 4 EDCA QOS priorities */ hw->queues = 4; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 4a22d3fba75..05121f395c4 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -7899,8 +7899,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e priv->ibss_beacon = NULL; /* Tell mac80211 our characteristics */ - hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_SIGNAL_DBM | + hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; /* 4 EDCA QOS priorities */ diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 3558cb21074..449c8d39348 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1650,7 +1650,6 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index f7c1f92c144..ec4ec65d94f 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2278,7 +2278,6 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = 0; diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index d383735ab8f..b9efa7f76c9 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1871,7 +1871,6 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) * Initialize all hw fields. */ rt2x00dev->hw->flags = - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index fcc532bb6a7..4d7b98b0503 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -935,7 +935,6 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf) hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band; hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_SIGNAL_DB; hw->max_signal = 100; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 4dd3d93e196..74487f26823 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -746,7 +746,6 @@ enum ieee80211_tkip_key_type { * Measurement, Channel Switch, Quieting, TPC */ enum ieee80211_hw_flags { - IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE = 1<<0, IEEE80211_HW_RX_INCLUDES_FCS = 1<<1, IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2, IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3, -- GitLab From 3a0f2c871849f23c1070965bf94dec3f9c0b479d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 15 Jul 2008 17:44:18 +0200 Subject: [PATCH 0237/1024] Ath5k: fix memory corruption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When signal is noisy, hardware can use all RX buffers and since the last entry in the list is self-linked, it overwrites the entry until we link new buffers. Ensure that we don't free this last one until we are 100% sure that it is not used by the hardware anymore to not cause memory curruption as can be seen below. This is done by checking next buffer in the list. Even after that we know that the hardware refetched the new link and proceeded further (the next buffer is ready) we can finally free the overwritten buffer. We discard it since the status in its descriptor is overwritten (OR-ed by new status) too. ============================================================================= BUG kmalloc-4096: Poison overwritten ----------------------------------------------------------------------------- INFO: 0xffff810067419060-0xffff810067419667. First byte 0x8 instead of 0x6b INFO: Allocated in dev_alloc_skb+0x18/0x30 age=1118 cpu=1 pid=0 INFO: Freed in skb_release_data+0x85/0xd0 age=1105 cpu=1 pid=3718 INFO: Slab 0xffffe200019d0600 objects=7 used=0 fp=0xffff810067419048 flags=0x40000000000020c3 INFO: Object 0xffff810067419048 @offset=4168 fp=0xffff81006741c120 Bytes b4 0xffff810067419038: 4f 0b 02 00 01 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a O.......ZZZZZZZZ Object 0xffff810067419048: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xffff810067419058: 6b 6b 6b 6b 6b 6b 6b 6b 08 42 30 00 00 0b 6b 80 kkkkkkkk.B0...k. Object 0xffff810067419068: f0 5d 00 4f 62 08 a3 64 00 0c 42 16 52 e4 f0 5a 360].Ob.243d..B.R344360Z Object 0xffff810067419078: 68 81 00 00 7b a5 b4 be 7d 3b 8f 53 cd d5 de 12 h...{245264276};.S315325336. Object 0xffff810067419088: 96 10 0b 89 48 54 23 41 0f 4e 2d b9 37 c3 cb 29 ....HT#A.N-2717303313) Object 0xffff810067419098: d1 e0 de 14 8a 57 2a cc 3b 44 0d 78 7a 19 12 15 321340336..W*314;D.xz... Object 0xffff8100674190a8: a9 ec d4 35 a8 10 ec 8c 40 a7 06 0a 51 a7 48 bb 2513543245250.354.@247..Q247H273 Object 0xffff8100674190b8: 3e cf a1 c7 38 60 63 3f 51 15 c7 20 eb ba 65 30 >ϡ3078`c?Q.307.353272e0 Redzone 0xffff81006741a048: bb bb bb bb bb bb bb bb 273273273273273273273273 Padding 0xffff81006741a088: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ Pid: 3297, comm: ath5k_pci Not tainted 2.6.26-rc8-mm1_64 #427 Call Trace: [] print_trailer+0xf6/0x150 [] check_bytes_and_report+0x125/0x180 [] check_object+0xac/0x260 [] __slab_alloc+0x368/0x6d0 [] ? wireless_send_event+0x142/0x310 [] ? __alloc_skb+0x44/0x150 [] ? wireless_send_event+0x142/0x310 [] __kmalloc_track_caller+0xc3/0xf0 [] __alloc_skb+0x6e/0x150 [... stack snipped] FIX kmalloc-4096: Restoring 0xffff810067419060-0xffff810067419667=0x6b FIX kmalloc-4096: Marking all objects used Signed-off-by: Jiri Slaby Acked-by: Nick Kossifidis Cc: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 32 ++++++++++++++++++++++++------- drivers/net/wireless/ath5k/base.h | 2 +- 2 files changed, 26 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index d9769c52734..ed51c4a69d4 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1682,20 +1682,21 @@ ath5k_tasklet_rx(unsigned long data) struct ath5k_rx_status rs = {}; struct sk_buff *skb; struct ath5k_softc *sc = (void *)data; - struct ath5k_buf *bf; + struct ath5k_buf *bf, *bf_last; struct ath5k_desc *ds; int ret; int hdrlen; int pad; spin_lock(&sc->rxbuflock); + if (list_empty(&sc->rxbuf)) { + ATH5K_WARN(sc, "empty rx buf pool\n"); + goto unlock; + } + bf_last = list_entry(sc->rxbuf.prev, struct ath5k_buf, list); do { rxs.flag = 0; - if (unlikely(list_empty(&sc->rxbuf))) { - ATH5K_WARN(sc, "empty rx buf pool\n"); - break; - } bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list); BUG_ON(bf->skb == NULL); skb = bf->skb; @@ -1705,8 +1706,24 @@ ath5k_tasklet_rx(unsigned long data) pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr, sc->desc_len, PCI_DMA_FROMDEVICE); - if (unlikely(ds->ds_link == bf->daddr)) /* this is the end */ - break; + /* + * last buffer must not be freed to ensure proper hardware + * function. When the hardware finishes also a packet next to + * it, we are sure, it doesn't use it anymore and we can go on. + */ + if (bf_last == bf) + bf->flags |= 1; + if (bf->flags) { + struct ath5k_buf *bf_next = list_entry(bf->list.next, + struct ath5k_buf, list); + ret = sc->ah->ah_proc_rx_desc(sc->ah, bf_next->desc, + &rs); + if (ret) + break; + bf->flags &= ~1; + /* skip the overwritten one (even status is martian) */ + goto next; + } ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs); if (unlikely(ret == -EINPROGRESS)) @@ -1816,6 +1833,7 @@ accept: next: list_move_tail(&bf->list, &sc->rxbuf); } while (ath5k_rxbuf_setup(sc, bf) == 0); +unlock: spin_unlock(&sc->rxbuflock); } diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index 47f414b09e6..d7e03e6b827 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -56,7 +56,7 @@ struct ath5k_buf { struct list_head list; - unsigned int flags; /* tx descriptor flags */ + unsigned int flags; /* rx descriptor flags */ struct ath5k_desc *desc; /* virtual addr of desc */ dma_addr_t daddr; /* physical addr of desc */ struct sk_buff *skb; /* skbuff for buf */ -- GitLab From 10488f8ad62be3b860bad74e60b4fe6ab87aece3 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 15 Jul 2008 17:44:19 +0200 Subject: [PATCH 0238/1024] Ath5k: kill tasklets on shutdown Don't forget to kill tasklets on stop to not panic if they fire after freeing some structures. Signed-off-by: Jiri Slaby Acked-by: Nick Kossifidis Cc: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index ed51c4a69d4..c5bf8a2ef5c 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2342,6 +2342,9 @@ ath5k_stop_hw(struct ath5k_softc *sc) mutex_unlock(&sc->lock); del_timer_sync(&sc->calib_tim); + tasklet_kill(&sc->rxtq); + tasklet_kill(&sc->txtq); + tasklet_kill(&sc->restq); return ret; } -- GitLab From 274c7c3638cd027b46f76d0caef96c1bad8b6701 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 15 Jul 2008 17:44:20 +0200 Subject: [PATCH 0239/1024] Ath5k: flush work Make sure that the irq is not in progress after stop. This means two things: - ensure the intr setting register is set by flushing posted values - call synchronize_irq() after that Also flush stop tx write, inform callers of the tx stop about still pending transfers (unsuccessful stop) and finally don't wait another 3ms in ath5k_rx_stop, since ath5k_hw_stop_rx_dma ensures transfer to be finished. Make sure all writes will be ordered in respect to locks by mmiowb(). Signed-off-by: Jiri Slaby Acked-by: Nick Kossifidis Cc: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 13 +++++++++++-- drivers/net/wireless/ath5k/hw.c | 4 ++++ 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index c5bf8a2ef5c..8e9afb3b3a5 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -43,7 +43,9 @@ #include #include #include +#include #include +#include #include #include #include @@ -1249,6 +1251,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) txq->link = &ds->ds_link; ath5k_hw_tx_start(ah, txq->qnum); + mmiowb(); spin_unlock_bh(&txq->lock); return 0; @@ -1583,7 +1586,6 @@ ath5k_rx_stop(struct ath5k_softc *sc) ath5k_hw_stop_pcu_recv(ah); /* disable PCU */ ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */ ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */ - mdelay(3); /* 3ms is long enough for 1 frame */ ath5k_debug_printrxbuffs(sc, ah); @@ -2258,6 +2260,7 @@ ath5k_init(struct ath5k_softc *sc) ret = 0; done: + mmiowb(); mutex_unlock(&sc->lock); return ret; } @@ -2290,6 +2293,7 @@ ath5k_stop_locked(struct ath5k_softc *sc) if (!test_bit(ATH_STAT_INVALID, sc->status)) { ath5k_led_off(sc); ath5k_hw_set_intr(ah, 0); + synchronize_irq(sc->pdev->irq); } ath5k_txq_cleanup(sc); if (!test_bit(ATH_STAT_INVALID, sc->status)) { @@ -2339,6 +2343,7 @@ ath5k_stop_hw(struct ath5k_softc *sc) } } ath5k_txbuf_free(sc, sc->bbuf); + mmiowb(); mutex_unlock(&sc->lock); del_timer_sync(&sc->calib_tim); @@ -2804,6 +2809,7 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, /* XXX: assoc id is set to 0 for now, mac80211 doesn't have * a clean way of letting us retrieve this yet. */ ath5k_hw_set_associd(ah, ah->ah_bssid, 0); + mmiowb(); } if (conf->changed & IEEE80211_IFCC_BEACON && @@ -2992,6 +2998,7 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, } unlock: + mmiowb(); mutex_unlock(&sc->lock); return ret; } @@ -3065,8 +3072,10 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) ret = ath5k_beacon_setup(sc, sc->bbuf); if (ret) sc->bbuf->skb = NULL; - else + else { ath5k_beacon_config(sc); + mmiowb(); + } end: mutex_unlock(&sc->lock); diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index c6d12c53bda..7ca87a55731 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -1440,6 +1440,7 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) /* Stop queue */ ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); } else { /* * Schedule TX disable and wait until queue is empty @@ -1456,6 +1457,8 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue) /* Clear register */ ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD); + if (pending) + return -EBUSY; } /* TODO: Check for success else return error */ @@ -1716,6 +1719,7 @@ enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask) /* ..re-enable interrupts */ ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); return old_mask; } -- GitLab From e86600c7b4e9b9b22ba51620613d6159bf5cf504 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 15 Jul 2008 17:44:43 +0200 Subject: [PATCH 0240/1024] Ath5k: fix dma operation Don't sync - coherent mapping (descriptors) - before unmap, it's useless - (wrongly anyway -- for_cpu) beacon skb, it's just mapped, so by the device yet Signed-off-by: Jiri Slaby Acked-by: Nick Kossifidis Cc: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 8e9afb3b3a5..3aa22dc7165 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1704,10 +1704,6 @@ ath5k_tasklet_rx(unsigned long data) skb = bf->skb; ds = bf->desc; - /* TODO only one segment */ - pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr, - sc->desc_len, PCI_DMA_FROMDEVICE); - /* * last buffer must not be freed to ensure proper hardware * function. When the hardware finishes also a packet next to @@ -1771,8 +1767,6 @@ ath5k_tasklet_rx(unsigned long data) goto next; } accept: - pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, - rs.rs_datalen, PCI_DMA_FROMDEVICE); pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize, PCI_DMA_FROMDEVICE); bf->skb = NULL; @@ -1860,9 +1854,6 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq) list_for_each_entry_safe(bf, bf0, &txq->q, list) { ds = bf->desc; - /* TODO only one segment */ - pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr, - sc->desc_len, PCI_DMA_FROMDEVICE); ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts); if (unlikely(ret == -EINPROGRESS)) break; @@ -2035,8 +2026,6 @@ ath5k_beacon_send(struct ath5k_softc *sc) ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq); /* NB: hw still stops DMA, so proceed */ } - pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, bf->skb->len, - PCI_DMA_TODEVICE); ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr); ath5k_hw_tx_start(ah, sc->bhalq); -- GitLab From 3e4242b99ce46fed82aa7f40ad5a1817a2b3bd45 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 15 Jul 2008 17:44:21 +0200 Subject: [PATCH 0241/1024] Ath5k: suspend/resume fixes - free and re-request irq since it might have changed during suspend - disable and enable msi - don't set D0 state of the device, it's already done by the PCI layer - do restore_state before enable_device, it's safer - check ath5k_init return value Signed-off-by: Jiri Slaby Acked-by: Nick Kossifidis Cc: Luis R. Rodriguez Cc: Jesse Barnes Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 26 +++++++++++++++++++++----- 1 file changed, 21 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 3aa22dc7165..7273e9f5c6d 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -592,6 +592,9 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state) ath5k_led_off(sc); ath5k_stop_hw(sc); + + free_irq(pdev->irq, sc); + pci_disable_msi(pdev); pci_save_state(pdev); pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); @@ -607,15 +610,12 @@ ath5k_pci_resume(struct pci_dev *pdev) struct ath5k_hw *ah = sc->ah; int i, err; - err = pci_set_power_state(pdev, PCI_D0); - if (err) - return err; + pci_restore_state(pdev); err = pci_enable_device(pdev); if (err) return err; - pci_restore_state(pdev); /* * Suspend/Resume resets the PCI configuration space, so we have to * re-disable the RETRY_TIMEOUT register (0x41) to keep @@ -623,7 +623,17 @@ ath5k_pci_resume(struct pci_dev *pdev) */ pci_write_config_byte(pdev, 0x41, 0); - ath5k_init(sc); + pci_enable_msi(pdev); + + err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); + if (err) { + ATH5K_ERR(sc, "request_irq failed\n"); + goto err_msi; + } + + err = ath5k_init(sc); + if (err) + goto err_irq; ath5k_led_enable(sc); /* @@ -637,6 +647,12 @@ ath5k_pci_resume(struct pci_dev *pdev) ath5k_hw_reset_key(ah, i); return 0; +err_irq: + free_irq(pdev->irq, sc); +err_msi: + pci_disable_msi(pdev); + pci_disable_device(pdev); + return err; } #endif /* CONFIG_PM */ -- GitLab From 734b5aa911dc65f4563048f069dfc631c9aa7de7 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Tue, 15 Jul 2008 13:07:16 -0400 Subject: [PATCH 0242/1024] ath5k: use positive logic for HP laptop LEDs Helge Deller reports that HP laptops (NC4010 and NC6000) use active- high signals to turn on the LEDs. Previous code used active-low for all devices. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 7273e9f5c6d..359795d8b48 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2581,8 +2581,6 @@ ath5k_init_leds(struct ath5k_softc *sc) struct pci_dev *pdev = sc->pdev; char name[ATH5K_LED_MAX_NAME_LEN + 1]; - sc->led_on = 0; /* active low */ - /* * Auto-enable soft led processing for IBM cards and for * 5211 minipci cards. @@ -2591,11 +2589,13 @@ ath5k_init_leds(struct ath5k_softc *sc) pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) { __set_bit(ATH_STAT_LEDSOFT, sc->status); sc->led_pin = 0; + sc->led_on = 0; /* active low */ } /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */ if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) { __set_bit(ATH_STAT_LEDSOFT, sc->status); sc->led_pin = 1; + sc->led_on = 1; /* active high */ } if (!test_bit(ATH_STAT_LEDSOFT, sc->status)) goto out; -- GitLab From 2fd9b2212e25e6411b6f309707f4e2683d164250 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Mon, 21 Jul 2008 21:18:17 -0300 Subject: [PATCH 0243/1024] rfkill: document rfkill_force_state as required (v2) While the rfkill class does work with just get_state(), it doesn't work well on devices that are subject to external events that cause rfkill state changes. Document that rfkill_force_state() is required in those cases. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- Documentation/rfkill.txt | 20 ++++++++++++++++---- net/rfkill/rfkill.c | 7 ++++++- 2 files changed, 22 insertions(+), 5 deletions(-) diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt index 0843ed0163a..28b6ec87c64 100644 --- a/Documentation/rfkill.txt +++ b/Documentation/rfkill.txt @@ -390,9 +390,10 @@ rfkill lines are inactive, it must return RFKILL_STATE_SOFT_BLOCKED if its soft rfkill input line is active. Only if none of the rfkill input lines are active, will it return RFKILL_STATE_UNBLOCKED. -If it doesn't implement the get_state() hook, it must make sure that its calls -to rfkill_force_state() are enough to keep the status always up-to-date, and it -must do a rfkill_force_state() on resume from sleep. +Since the device has a hardware rfkill line, it IS subject to state changes +external to rfkill. Therefore, the driver must make sure that it calls +rfkill_force_state() to keep the status always up-to-date, and it must do a +rfkill_force_state() on resume from sleep. Every time the driver gets a notification from the card that one of its rfkill lines changed state (polling might be needed on badly designed cards that don't @@ -422,13 +423,24 @@ of the hardware is unknown), or read-write (where the hardware can be queried about its current state). The rfkill class will call the get_state hook of a device every time it needs -to know the *real* current state of the hardware. This can happen often. +to know the *real* current state of the hardware. This can happen often, but +it does not do any polling, so it is not enough on hardware that is subject +to state changes outside of the rfkill subsystem. + +Therefore, calling rfkill_force_state() when a state change happens is +mandatory when the device has a hardware rfkill line, or when something else +like the firmware could cause its state to be changed without going through the +rfkill class. Some hardware provides events when its status changes. In these cases, it is best for the driver to not provide a get_state hook, and instead register the rfkill class *already* with the correct status, and keep it updated using rfkill_force_state() when it gets an event from the hardware. +rfkill_force_state() must be used on the device resume handlers to update the +rfkill status, should there be any chance of the device status changing during +the sleep. + There is no provision for a statically-allocated rfkill struct. You must use rfkill_allocate() to allocate one. diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index 7a560b78509..022fe50ab0e 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -252,7 +252,12 @@ EXPORT_SYMBOL_GPL(rfkill_epo); * a notification by the firmware/hardware of the current *real* * state of the radio rfkill switch. * - * It may not be called from an atomic context. + * Devices which are subject to external changes on their rfkill + * state (such as those caused by a hardware rfkill line) MUST + * have their driver arrange to call rfkill_force_state() as soon + * as possible after such a change. + * + * This function may not be called from an atomic context. */ int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state) { -- GitLab From 37f55e9d78d1b63047b1b7ae175cdce650547ba8 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Mon, 21 Jul 2008 21:18:18 -0300 Subject: [PATCH 0244/1024] rfkill: fix led-trigger unregister order in error unwind rfkill needs to unregister the led trigger AFTER a call to rfkill_remove_switch(), otherwise it will not update the LED state, possibly leaving it ON when it should be OFF. To make led-trigger unregistering safer, guard against unregistering a trigger twice, and also against issuing trigger events to a led trigger that was unregistered. This makes the error unwind paths more resilient. Refer to "rfkill: Register LED triggers before registering switch". Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Cc: Michael Buesch Cc: Dmitry Baryshkov Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index 022fe50ab0e..fc3a4fd8899 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -590,8 +590,10 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill) static void rfkill_led_trigger_unregister(struct rfkill *rfkill) { #ifdef CONFIG_RFKILL_LEDS - if (rfkill->led_trigger.name) + if (rfkill->led_trigger.name) { led_trigger_unregister(&rfkill->led_trigger); + rfkill->led_trigger.name = NULL; + } #endif } @@ -627,8 +629,8 @@ int rfkill_register(struct rfkill *rfkill) error = device_add(dev); if (error) { - rfkill_led_trigger_unregister(rfkill); rfkill_remove_switch(rfkill); + rfkill_led_trigger_unregister(rfkill); return error; } -- GitLab From f1b23361a0f15497d4c6795a2935b2e98064ddfb Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Mon, 21 Jul 2008 21:18:19 -0300 Subject: [PATCH 0245/1024] rfkill: document the rfkill struct locking (v2) Reorder fields in struct rfkill and add comments to make it clear which fields are protected by rfkill->mutex. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- include/linux/rfkill.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index c5f6e54ec6a..741d1a62cc3 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -68,7 +68,8 @@ enum rfkill_state { * @user_claim_unsupported: Whether the hardware supports exclusive * RF-kill control by userspace. Set this before registering. * @user_claim: Set when the switch is controlled exlusively by userspace. - * @mutex: Guards switch state transitions + * @mutex: Guards switch state transitions. It serializes callbacks + * and also protects the state. * @data: Pointer to the RF button drivers private data which will be * passed along when toggling radio state. * @toggle_radio(): Mandatory handler to control state of the radio. @@ -89,12 +90,13 @@ struct rfkill { const char *name; enum rfkill_type type; - enum rfkill_state state; bool user_claim_unsupported; bool user_claim; + /* the mutex serializes callbacks and also protects + * the state */ struct mutex mutex; - + enum rfkill_state state; void *data; int (*toggle_radio)(void *data, enum rfkill_state state); int (*get_state)(void *data, enum rfkill_state *state); -- GitLab From 064af1117b4aa64a0e52f6b741df7356ef055142 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Mon, 21 Jul 2008 21:18:20 -0300 Subject: [PATCH 0246/1024] rfkill: mutex fixes There are two mutexes in rfkill: rfkill->mutex, which protects some of the fields of a rfkill struct, and is also used for callback serialization. rfkill_mutex, which protects the global state, the list of registered rfkill structs and rfkill->claim. Make sure to use the correct mutex, and to not miss locking rfkill->mutex even when we already took rfkill_mutex. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index fc3a4fd8899..ac205eceaf4 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -150,7 +150,7 @@ static void update_rfkill_state(struct rfkill *rfkill) * even if the radio is in RFKILL_STATE_HARD_BLOCKED state, so as to * give the driver a hint that it should double-BLOCK the transmitter. * - * Caller must have aquired rfkill_mutex. + * Caller must have acquired rfkill->mutex. */ static int rfkill_toggle_radio(struct rfkill *rfkill, enum rfkill_state state, @@ -216,8 +216,11 @@ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state) rfkill_states[type] = state; list_for_each_entry(rfkill, &rfkill_list, node) { - if ((!rfkill->user_claim) && (rfkill->type == type)) + if ((!rfkill->user_claim) && (rfkill->type == type)) { + mutex_lock(&rfkill->mutex); rfkill_toggle_radio(rfkill, state, 0); + mutex_unlock(&rfkill->mutex); + } } mutex_unlock(&rfkill_mutex); @@ -228,7 +231,7 @@ EXPORT_SYMBOL(rfkill_switch_all); * rfkill_epo - emergency power off all transmitters * * This kicks all rfkill devices to RFKILL_STATE_SOFT_BLOCKED, ignoring - * everything in its path but rfkill_mutex. + * everything in its path but rfkill_mutex and rfkill->mutex. */ void rfkill_epo(void) { @@ -236,7 +239,9 @@ void rfkill_epo(void) mutex_lock(&rfkill_mutex); list_for_each_entry(rfkill, &rfkill_list, node) { + mutex_lock(&rfkill->mutex); rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); + mutex_unlock(&rfkill->mutex); } mutex_unlock(&rfkill_mutex); } @@ -372,6 +377,9 @@ static ssize_t rfkill_claim_store(struct device *dev, if (!capable(CAP_NET_ADMIN)) return -EPERM; + if (rfkill->user_claim_unsupported) + return -EOPNOTSUPP; + /* * Take the global lock to make sure the kernel is not in * the middle of rfkill_switch_all @@ -380,19 +388,17 @@ static ssize_t rfkill_claim_store(struct device *dev, if (error) return error; - if (rfkill->user_claim_unsupported) { - error = -EOPNOTSUPP; - goto out_unlock; - } if (rfkill->user_claim != claim) { - if (!claim) + if (!claim) { + mutex_lock(&rfkill->mutex); rfkill_toggle_radio(rfkill, rfkill_states[rfkill->type], 0); + mutex_unlock(&rfkill->mutex); + } rfkill->user_claim = claim; } -out_unlock: mutex_unlock(&rfkill_mutex); return error ? error : count; @@ -521,8 +527,11 @@ static void rfkill_remove_switch(struct rfkill *rfkill) { mutex_lock(&rfkill_mutex); list_del_init(&rfkill->node); - rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); mutex_unlock(&rfkill_mutex); + + mutex_lock(&rfkill->mutex); + rfkill_toggle_radio(rfkill, RFKILL_STATE_SOFT_BLOCKED, 1); + mutex_unlock(&rfkill->mutex); } /** -- GitLab From 435307a365ceedc4f4e1813e405f583f434d98e4 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Mon, 21 Jul 2008 21:18:22 -0300 Subject: [PATCH 0247/1024] rfkill: yet more minor kernel-doc fixes For some stupid reason, I sent and old version of the patch minor kernel doc-fix patch, and it got merged before I noticed the problem. This is an incremental fix on top. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index ac205eceaf4..c6f2f388cb7 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -130,7 +130,6 @@ static void update_rfkill_state(struct rfkill *rfkill) /** * rfkill_toggle_radio - wrapper for toggle_radio hook - * * @rfkill: the rfkill struct to use * @force: calls toggle_radio even if cache says it is not needed, * and also makes sure notifications of the state will be @@ -141,8 +140,8 @@ static void update_rfkill_state(struct rfkill *rfkill) * calls and handling all the red tape such as issuing notifications * if the call is successful. * - * Note that @force cannot override a (possibly cached) state of - * RFKILL_STATE_HARD_BLOCKED. Any device making use of + * Note that the @force parameter cannot override a (possibly cached) + * state of RFKILL_STATE_HARD_BLOCKED. Any device making use of * RFKILL_STATE_HARD_BLOCKED implements either get_state() or * rfkill_force_state(), so the cache either is bypassed or valid. * @@ -200,12 +199,12 @@ static int rfkill_toggle_radio(struct rfkill *rfkill, /** * rfkill_switch_all - Toggle state of all switches of given type - * @type: type of interfaces to be affeceted + * @type: type of interfaces to be affected * @state: the new state * - * This function toggles state of all switches of given type unless - * a specific switch is claimed by userspace in which case it is - * left alone. + * This function toggles the state of all switches of given type, + * unless a specific switch is claimed by userspace (in which case, + * that switch is left alone). */ void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state) { @@ -540,9 +539,10 @@ static void rfkill_remove_switch(struct rfkill *rfkill) * @type: type of the switch (RFKILL_TYPE_*) * * This function should be called by the network driver when it needs - * rfkill structure. Once the structure is allocated the driver shoud - * finish its initialization by setting name, private data, enable_radio + * rfkill structure. Once the structure is allocated the driver should + * finish its initialization by setting the name, private data, enable_radio * and disable_radio methods and then register it with rfkill_register(). + * * NOTE: If registration fails the structure shoudl be freed by calling * rfkill_free() otherwise rfkill_unregister() should be used. */ @@ -574,7 +574,7 @@ EXPORT_SYMBOL(rfkill_allocate); * rfkill_free - Mark rfkill structure for deletion * @rfkill: rfkill structure to be destroyed * - * Decrements reference count of rfkill structure so it is destroyed. + * Decrements reference count of the rfkill structure so it is destroyed. * Note that rfkill_free() should _not_ be called after rfkill_unregister(). */ void rfkill_free(struct rfkill *rfkill) -- GitLab From 699669f331a9e459713e4327a468db8fbb8cd60f Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Wed, 16 Jul 2008 16:39:56 +0300 Subject: [PATCH 0248/1024] iwl-3945: add #ifdef CONFIG_IWL3945_LEDS to avoid compile warning. When building the wireless-next-2.6 tree with CONFIG_IWL3945 (for building iwl-3945 driver) and where CONFIG_IWL3945_LEDS is not set, we get this warning: drivers/net/wireless/iwlwifi/iwl-3945.c: In function 'iwl3945_pass_packet_to_mac80211': drivers/net/wireless/iwlwifi/iwl-3945.c:633: warning: unused variable 'hdr' This patch adds #ifdef to iwl3945_pass_packet_to_mac80211() to avoid this warning. (The variable 'hdr' is used only if CONFIG_IWL3945_LEDS is set) Signed-off-by: Rami Rosen Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index c2a76785b66..a51e0eaa133 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -630,7 +630,9 @@ static void iwl3945_pass_packet_to_mac80211(struct iwl3945_priv *priv, struct ieee80211_rx_status *stats) { struct iwl3945_rx_packet *pkt = (struct iwl3945_rx_packet *)rxb->skb->data; +#ifdef CONFIG_IWL3945_LEDS struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); +#endif struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt); short len = le16_to_cpu(rx_hdr->len); -- GitLab From fb904907fb1a02a64af9f2d1fb1ef35d963231f9 Mon Sep 17 00:00:00 2001 From: Brian Cavagnolo Date: Wed, 16 Jul 2008 12:15:26 -0700 Subject: [PATCH 0249/1024] libertas: check bounds and only use decimal for sysfs persistent features. Some persistent settings were using hex and others decimal. In some cases, values were set in hex but reported in decimal. Confusing. Signed-off-by: Brian Cavagnolo Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/persistcfg.c | 30 +++++++++++----------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/libertas/persistcfg.c b/drivers/net/wireless/libertas/persistcfg.c index 6d0ff8decaf..3309a9c3cfe 100644 --- a/drivers/net/wireless/libertas/persistcfg.c +++ b/drivers/net/wireless/libertas/persistcfg.c @@ -48,7 +48,7 @@ static ssize_t bootflag_get(struct device *dev, if (ret) return ret; - return snprintf(buf, 12, "0x%x\n", le32_to_cpu(defs.bootflag)); + return snprintf(buf, 12, "%d\n", le32_to_cpu(defs.bootflag)); } /** @@ -63,8 +63,8 @@ static ssize_t bootflag_set(struct device *dev, struct device_attribute *attr, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 1)) return -EINVAL; *((__le32 *)&cmd.data[0]) = cpu_to_le32(!!datum); @@ -91,7 +91,7 @@ static ssize_t boottime_get(struct device *dev, if (ret) return ret; - return snprintf(buf, 12, "0x%x\n", defs.boottime); + return snprintf(buf, 12, "%d\n", defs.boottime); } /** @@ -106,8 +106,8 @@ static ssize_t boottime_set(struct device *dev, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 255)) return -EINVAL; /* A too small boot time will result in the device booting into @@ -143,7 +143,7 @@ static ssize_t channel_get(struct device *dev, if (ret) return ret; - return snprintf(buf, 12, "0x%x\n", le16_to_cpu(defs.channel)); + return snprintf(buf, 12, "%d\n", le16_to_cpu(defs.channel)); } /** @@ -154,11 +154,11 @@ static ssize_t channel_set(struct device *dev, struct device_attribute *attr, { struct lbs_private *priv = to_net_dev(dev)->priv; struct cmd_ds_mesh_config cmd; - uint16_t datum; + uint32_t datum; int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%hx", &datum); + ret = sscanf(buf, "%d", &datum); if (ret != 1 || datum < 1 || datum > 11) return -EINVAL; @@ -274,8 +274,8 @@ static ssize_t protocol_id_set(struct device *dev, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 255)) return -EINVAL; /* fetch all other Information Element parameters */ @@ -328,8 +328,8 @@ static ssize_t metric_id_set(struct device *dev, struct device_attribute *attr, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 255)) return -EINVAL; /* fetch all other Information Element parameters */ @@ -382,8 +382,8 @@ static ssize_t capability_set(struct device *dev, struct device_attribute *attr, int ret; memset(&cmd, 0, sizeof(cmd)); - ret = sscanf(buf, "%x", &datum); - if (ret != 1) + ret = sscanf(buf, "%d", &datum); + if ((ret != 1) || (datum > 255)) return -EINVAL; /* fetch all other Information Element parameters */ -- GitLab From c0b6a1c9be3acac0f600072ebc2bc6ad3d8c8f76 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Thu, 17 Jul 2008 13:19:24 +0400 Subject: [PATCH 0250/1024] iwlwifi: compilation error when CONFIG_IWLWIFI_DEBUG is not set CC [M] drivers/net/wireless/iwlwifi/iwl-rfkill.o drivers/net/wireless/iwlwifi/iwl-led.c: In function 'iwl_led_brightness_set': drivers/net/wireless/iwlwifi/iwl-led.c:198: error: 'led_type_str' undeclared (first use in this function) drivers/net/wireless/iwlwifi/iwl-led.c:198: error: (Each undeclared identifier is reported only once drivers/net/wireless/iwlwifi/iwl-led.c:198: error: for each function it appears in.) The problem is that led_type_str is defined under CONFIG_IWLWIFI_DEBUG while IWL_DEBUG is a static inline function in this case. Replace it with macro. Signed-off-by: Denis V. Lunev Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-debug.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h index 58384805a49..d6d729e86bd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-debug.h @@ -68,12 +68,8 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv); #endif #else -static inline void IWL_DEBUG(int level, const char *fmt, ...) -{ -} -static inline void IWL_DEBUG_LIMIT(int level, const char *fmt, ...) -{ -} +#define IWL_DEBUG(level, fmt, args...) +#define IWL_DEBUG_LIMIT(level, fmt, args...) #endif /* CONFIG_IWLWIFI_DEBUG */ -- GitLab From cb9289cb798502a5010c8f1d8d003842cd1449a4 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Fri, 18 Jul 2008 10:56:12 +0400 Subject: [PATCH 0251/1024] iwlwifi: small compile warnings without CONFIG_IWLWIFI_DEBUG CC [M] drivers/net/wireless/iwlwifi/iwl-scan.o drivers/net/wireless/iwlwifi/iwl-scan.c: In function 'iwl_rx_scan_complete_notif': drivers/net/wireless/iwlwifi/iwl-scan.c:274: warning: unused variable 'scan_notif' Signed-off-by: Denis V. Lunev Acked-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-scan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index efc750d2fc5..5a00ac23e2d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -270,6 +270,7 @@ static void iwl_rx_scan_results_notif(struct iwl_priv *priv, static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) { +#ifdef CONFIG_IWLWIFI_DEBUG struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw; @@ -277,6 +278,7 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, scan_notif->scanned_channels, scan_notif->tsf_low, scan_notif->tsf_high, scan_notif->status); +#endif /* The HW is no longer scanning */ clear_bit(STATUS_SCAN_HW, &priv->status); -- GitLab From bc05116ab33d30342e2b4b1bcc6d6e1184e9df97 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Fri, 18 Jul 2008 11:11:21 -0400 Subject: [PATCH 0252/1024] ath5k: fix recursive locking in ath5k_beacon_update ath5k_beacon_update takes sc->lock upon entry. However, it is only called from within ath5k_config_interface, which already holds the lock. Remove the unnecessary locking from ath5k_beacon_update. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 359795d8b48..3285032727b 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -3065,8 +3065,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) ath5k_debug_dump_skb(sc, skb, "BC ", 1); - mutex_lock(&sc->lock); - if (sc->opmode != IEEE80211_IF_TYPE_IBSS) { ret = -EIO; goto end; @@ -3083,7 +3081,6 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) } end: - mutex_unlock(&sc->lock); return ret; } -- GitLab From 256b152b005e319f985f50f2a910a75ba0def74f Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 18 Jul 2008 12:56:59 -0400 Subject: [PATCH 0253/1024] ath5k: don't enable MSI, we cannot handle it yet MSI is a nice thing, but we cannot enable it without changing the interrupt handler. If we do it, we break MSI capable hardware, specifically AR5006 chipset. Signed-off-by: Pavel Roskin Acked-by: Nick Kossifidis Cc: stable Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 3285032727b..1106d1c0629 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -473,9 +473,6 @@ ath5k_pci_probe(struct pci_dev *pdev, /* Set private data */ pci_set_drvdata(pdev, hw); - /* Enable msi for devices that support it */ - pci_enable_msi(pdev); - /* Setup interrupt handler */ ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); if (ret) { @@ -553,7 +550,6 @@ err_ah: err_irq: free_irq(pdev->irq, sc); err_free: - pci_disable_msi(pdev); ieee80211_free_hw(hw); err_map: pci_iounmap(pdev, mem); @@ -575,7 +571,6 @@ ath5k_pci_remove(struct pci_dev *pdev) ath5k_detach(pdev, hw); ath5k_hw_detach(sc->ah); free_irq(pdev->irq, sc); - pci_disable_msi(pdev); pci_iounmap(pdev, sc->iobase); pci_release_region(pdev, 0); pci_disable_device(pdev); -- GitLab From ed06387b44f0501f7298b559dc8ddfcd410c8fa0 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 19 Jul 2008 16:15:42 +0200 Subject: [PATCH 0254/1024] rt2x00: Remove duplicate declaration rt2x00queue_free_skb() was declared twice. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00lib.h | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index f2c9b0e79b5..c5fb3a72cf3 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -124,13 +124,6 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); */ void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); -/** - * rt2x00queue_free_skb - free a skb - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @skb: The skb to free. - */ -void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); - /** * rt2x00queue_write_tx_frame - Write TX frame to hardware * @queue: Queue over which the frame should be send -- GitLab From f2fdbc4847e0d3991474949f21aa439c361391db Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 19 Jul 2008 16:16:12 +0200 Subject: [PATCH 0255/1024] rt2x00: Fix EIFS timing value Olivier reported a difference between the EIFS values used in the legacy driver and the one in the rt2x00 drivers. In rt2x00 the value was ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) which comes down to 314us while the legacy driver uses the value 364us This was caused because EIFS is: SIFS + DIFS + AckTime This patch will fix this by adding the DIFS by the above value, and creating a SHORT_EIFS define which uses the SHORT_DIFS. Reported-by: Olivier Cornu Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 5 ++++- drivers/net/wireless/rt2x00/rt2x00config.c | 2 +- 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 07b03b3c7ef..73495f0ee13 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -108,7 +108,10 @@ #define SHORT_PIFS ( SIFS + SHORT_SLOT_TIME ) #define DIFS ( PIFS + SLOT_TIME ) #define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME ) -#define EIFS ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) +#define EIFS ( SIFS + DIFS + \ + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) +#define SHORT_EIFS ( SIFS + SHORT_DIFS + \ + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) /* * Chipset identification diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index f20ca712504..3f89516e833 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -271,7 +271,7 @@ config: libconf.sifs = SIFS; libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS; libconf.difs = short_slot_time ? SHORT_DIFS : DIFS; - libconf.eifs = EIFS; + libconf.eifs = short_slot_time ? SHORT_EIFS : EIFS; } libconf.conf = conf; -- GitLab From ed0dbeeb92bdb1030bcec67e20b294bd2020cb31 Mon Sep 17 00:00:00 2001 From: Iwo Mergler Date: Sat, 19 Jul 2008 16:16:54 +0200 Subject: [PATCH 0256/1024] rt2x00: Support for large vendor requests Adds an extra rt2x00 vendor request function to support register transfers beyond the CSR_CACHE_SIZE / USB packet size limit. This is useful for firmware uploads, beacon templates and keys, all of which are to large to do with a single USB request. Signed-off-by: Iwo Mergler Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00usb.c | 32 +++++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00usb.h | 21 +++++++++++++++- 2 files changed, 52 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 83862e7f7ae..933e6cc9359 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -122,6 +122,38 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev, } EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); +int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, + const u8 request, const u8 requesttype, + const u16 offset, void *buffer, + const u16 buffer_length, + const int timeout) +{ + int status = 0; + unsigned char *tb; + u16 off, len, bsize; + + mutex_lock(&rt2x00dev->usb_cache_mutex); + + tb = buffer; + off = offset; + len = buffer_length; + while (len && !status) { + bsize = min_t(u16, CSR_CACHE_SIZE, len); + status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request, + requesttype, off, tb, + bsize, timeout); + + tb += bsize; + len -= bsize; + off += bsize; + } + + mutex_unlock(&rt2x00dev->usb_cache_mutex); + + return status; +} +EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff); + /* * TX data handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index aad794adf52..8d5d4272e88 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -70,7 +70,7 @@ /* * Cache size */ -#define CSR_CACHE_SIZE 8 +#define CSR_CACHE_SIZE 64 #define CSR_CACHE_SIZE_FIRMWARE 64 /* @@ -171,6 +171,25 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, const u16 offset, void *buffer, const u16 buffer_length, const int timeout); +/** + * rt2x00usb_vendor_request_large_buff - Send register command to device (buffered) + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @request: USB vendor command (See &enum rt2x00usb_vendor_request) + * @requesttype: Request type &USB_VENDOR_REQUEST_* + * @offset: Register start offset to perform action on + * @buffer: Buffer where information will be read/written to by device + * @buffer_length: Size of &buffer + * @timeout: Operation timeout + * + * This function is used to transfer register data in blocks larger + * then CSR_CACHE_SIZE. Use for firmware upload, keys and beacons. + */ +int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, + const u8 request, const u8 requesttype, + const u16 offset, void *buffer, + const u16 buffer_length, + const int timeout); + /** * rt2x00usb_vendor_request_sw - Send single register command to device * @rt2x00dev: Pointer to &struct rt2x00_dev -- GitLab From 3e0c1abe748a30bc705a55f71bca8e04a83820f1 Mon Sep 17 00:00:00 2001 From: Iwo Mergler Date: Sat, 19 Jul 2008 16:17:16 +0200 Subject: [PATCH 0257/1024] rt2x00: Large vendor requests for rt73usb firmware upload and beacons Switches rt73usb to use large vendor requests for firmware and beacons. This also fixes the garbled beacon bug. Signed-off-by: Iwo Mergler Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00usb.h | 1 - drivers/net/wireless/rt2x00/rt73usb.c | 40 ++++++------------------- 2 files changed, 9 insertions(+), 32 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index 8d5d4272e88..ee3875f894a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -71,7 +71,6 @@ * Cache size */ #define CSR_CACHE_SIZE 64 -#define CSR_CACHE_SIZE_FIRMWARE 64 /* * USB request types. diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index b9efa7f76c9..fc320c0409d 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -890,9 +890,6 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, unsigned int i; int status; u32 reg; - const char *ptr = data; - char *cache; - int buflen; /* * Wait for stable hardware. @@ -911,31 +908,12 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, /* * Write firmware to device. - * We setup a seperate cache for this action, - * since we are going to write larger chunks of data - * then normally used cache size. */ - cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL); - if (!cache) { - ERROR(rt2x00dev, "Failed to allocate firmware cache.\n"); - return -ENOMEM; - } - - for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) { - buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE); - - memcpy(cache, ptr, buflen); - - rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - FIRMWARE_IMAGE_BASE + i, 0, - cache, buflen, - REGISTER_TIMEOUT32(buflen)); - - ptr += buflen; - } - - kfree(cache); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, + FIRMWARE_IMAGE_BASE, + data, len, + REGISTER_TIMEOUT32(len)); /* * Send firmware request to device to load firmware, @@ -1374,10 +1352,10 @@ static void rt73usb_write_beacon(struct queue_entry *entry) * Write entire beacon with descriptor to register. */ beacon_base = HW_BEACON_OFFSET(entry->entry_idx); - rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, beacon_base, 0, - entry->skb->data, entry->skb->len, - REGISTER_TIMEOUT32(entry->skb->len)); + rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, beacon_base, + entry->skb->data, entry->skb->len, + REGISTER_TIMEOUT32(entry->skb->len)); /* * Clean up the beacon skb. -- GitLab From b93ce437eba7e0232683326f30d9d1167a872fad Mon Sep 17 00:00:00 2001 From: Iwo Mergler Date: Sat, 19 Jul 2008 16:17:40 +0200 Subject: [PATCH 0258/1024] rt2x00: Fix the beacon length bug When setting up a beacon template, the length of the beacon is calculated with the assumption that the SKB already contains the Tx descriptor. In the case of beacons it doesn't. This patch undoes the damage by adding the Tx descriptor length to the beacon length. This is safe, because the shortest possible beacon is longer than the Tx header. Signed-off-by: Iwo Mergler Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2500usb.c | 12 ++++++++++++ drivers/net/wireless/rt2x00/rt73usb.c | 12 ++++++++++++ 2 files changed, 24 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 449c8d39348..3078417b326 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1121,6 +1121,7 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) int pipe = usb_sndbulkpipe(usb_dev, 1); int length; u16 reg; + u32 word, len; /* * Add the descriptor in front of the skb. @@ -1129,6 +1130,17 @@ static void rt2500usb_write_beacon(struct queue_entry *entry) memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len); skbdesc->desc = entry->skb->data; + /* + * Adjust the beacon databyte count. The current number is + * calculated before this function gets called, but falsely + * assumes that the descriptor was already present in the SKB. + */ + rt2x00_desc_read(skbdesc->desc, 0, &word); + len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT); + len += skbdesc->desc_len; + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len); + rt2x00_desc_write(skbdesc->desc, 0, word); + /* * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index fc320c0409d..866504612e8 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1330,6 +1330,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry) struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); unsigned int beacon_base; u32 reg; + u32 word, len; /* * Add the descriptor in front of the skb. @@ -1338,6 +1339,17 @@ static void rt73usb_write_beacon(struct queue_entry *entry) memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len); skbdesc->desc = entry->skb->data; + /* + * Adjust the beacon databyte count. The current number is + * calculated before this function gets called, but falsely + * assumes that the descriptor was already present in the SKB. + */ + rt2x00_desc_read(skbdesc->desc, 0, &word); + len = rt2x00_get_field32(word, TXD_W0_DATABYTE_COUNT); + len += skbdesc->desc_len; + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, len); + rt2x00_desc_write(skbdesc->desc, 0, word); + /* * Disable beaconing while we are reloading the beacon data, * otherwise we might be sending out invalid data. -- GitLab From 5adf6d63c1697ce1835daf2b5393488a71ee0dca Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 20 Jul 2008 18:03:38 +0200 Subject: [PATCH 0259/1024] rt2x00: Fix QOS sequence counting When IEEE80211_TX_CTL_ASSIGN_SEQ is not set, the driver should disable hardware sequence counting to make sure the mac80211 provided counter is used. This fixes QOS sequence counting, since that is one of the cases where mac80211 provides a seperate sequence counter. By moving the sequence counting code to rt2x00queue we make sure that _all_ frames get the sequence counter, including RTS/CTS and Beacon frames. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00mac.c | 13 ------------ drivers/net/wireless/rt2x00/rt2x00queue.c | 26 +++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00queue.h | 2 ++ drivers/net/wireless/rt2x00/rt61pci.c | 3 ++- drivers/net/wireless/rt2x00/rt73usb.c | 3 ++- 5 files changed, 32 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index f1dcbaa80c3..9d346bd2db0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -96,7 +96,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; enum data_queue_qid qid = skb_get_queue_mapping(skb); - struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); struct data_queue *queue; u16 frame_control; @@ -152,18 +151,6 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) } } - /* - * XXX: This is as wrong as the old mac80211 code was, - * due to beacons not getting sequence numbers assigned - * properly. - */ - if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { - if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) - intf->seqno += 0x10; - ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); - ieee80211hdr->seq_ctrl |= cpu_to_le16(intf->seqno); - } - if (rt2x00queue_write_tx_frame(queue, skb)) { ieee80211_stop_queue(rt2x00dev->hw, qid); return NETDEV_TX_BUSY; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 7f442030f5a..7b581a370fd 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -120,6 +120,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; struct ieee80211_rate *rate = ieee80211_get_tx_rate(rt2x00dev->hw, tx_info); @@ -199,6 +200,31 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, txdesc->ifs = IFS_SIFS; } + /* + * Hardware should insert sequence counter. + * FIXME: We insert a software sequence counter first for + * hardware that doesn't support hardware sequence counting. + * + * This is wrong because beacons are not getting sequence + * numbers assigned properly. + * + * A secondary problem exists for drivers that cannot toggle + * sequence counting per-frame, since those will override the + * sequence counter given by mac80211. + */ + if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + spin_lock(&intf->lock); + + if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) + intf->seqno += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(intf->seqno); + + spin_unlock(&intf->lock); + + __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); + } + /* * PLCP setup * Length calculation depends on OFDM/CCK rate. diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 8945945c892..a4a8c57004d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -199,6 +199,7 @@ struct txdone_entry_desc { * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame. * @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame. * @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate. + * @ENTRY_TXD_GENERATE_SEQ: This frame requires sequence counter. * @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame. * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment. * @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted. @@ -210,6 +211,7 @@ enum txentry_desc_flags { ENTRY_TXD_RTS_FRAME, ENTRY_TXD_CTS_FRAME, ENTRY_TXD_OFDM_RATE, + ENTRY_TXD_GENERATE_SEQ, ENTRY_TXD_FIRST_FRAGMENT, ENTRY_TXD_MORE_FRAG, ENTRY_TXD_REQ_TIMESTAMP, diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index ec4ec65d94f..fbe2a652e01 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1544,7 +1544,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); + rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, + test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); rt2x00_desc_write(txd, 1, word); diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 866504612e8..9761eaaa08b 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1281,7 +1281,8 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min); rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); - rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); + rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, + test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags)); rt2x00_desc_write(txd, 1, word); rt2x00_desc_read(txd, 2, &word); -- GitLab From e7087a828f8714e464fff18d93618727530dfd89 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 20 Jul 2008 18:03:58 +0200 Subject: [PATCH 0260/1024] rt2x00: Fix memleak when RTS/CTS fails When sending the RTS/CTS frame fails, we should free the skb buffer which was created. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00mac.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 9d346bd2db0..1f83d5fbf6b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -83,6 +83,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, (struct ieee80211_rts *)(skb->data)); if (rt2x00queue_write_tx_frame(queue, skb)) { + dev_kfree_skb_any(skb); WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n"); return NETDEV_TX_BUSY; } -- GitLab From 80c42affad970c8ebc5ebec4681aef8dadf21c32 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 21 Jul 2008 09:58:11 +0200 Subject: [PATCH 0261/1024] drivers/net/wireless/ipw2100.c: Release mutex in error handling code The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // Signed-off-by: Julia Lawall Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2100.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 5bf9e00b070..c6f886ec08a 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -6442,6 +6442,7 @@ static int ipw2100_resume(struct pci_dev *pci_dev) if (err) { printk(KERN_ERR "%s: pci_enable_device failed on resume\n", dev->name); + mutex_unlock(&priv->action_mutex); return err; } pci_restore_state(pci_dev); @@ -7146,7 +7147,7 @@ static int ipw2100_wx_get_rate(struct net_device *dev, err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len); if (err) { IPW_DEBUG_WX("failed querying ordinals.\n"); - return err; + goto done; } switch (val & TX_RATE_MASK) { -- GitLab From 4104863fb4a724723d1d5f3cba9d3c5084087e45 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 21 Jul 2008 11:29:34 +0200 Subject: [PATCH 0262/1024] b43legacy: Release mutex in error handling code The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // Signed-off-by: Julia Lawall Signed-off-by: Michael Buesch Cc: stable Signed-off-by: John W. Linville --- drivers/net/wireless/b43legacy/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index cb5ad4f7fb2..2541c81932f 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3845,10 +3845,10 @@ static int b43legacy_resume(struct ssb_device *dev) goto out; } } - mutex_unlock(&wl->mutex); b43legacydbg(wl, "Device resumed.\n"); out: + mutex_unlock(&wl->mutex); return err; } -- GitLab From 74c0ee9b59bdaa81a666d5d58022f847390e4b0c Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 21 Jul 2008 11:52:44 +0200 Subject: [PATCH 0263/1024] rt2x00: Force full register config after start() rt2x00 will only perform configuration changes from mac80211 when the configuration option has changed. This means it keeps track of the current active configuration and will check these values when the config() callback function is used. However this causes breakage when the interface has been brought down and up again, since all stored active values aren't reset while the registers might have. This is for example the case with rt61pci antenna registers which will jump to invalid values when the interface has been started. To make sure a full configuration takes place after the start() callback function, a new flag is added which will be checked during config() and skips the "what's changed" phase. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 1 + drivers/net/wireless/rt2x00/rt2x00dev.c | 7 ++++--- drivers/net/wireless/rt2x00/rt2x00mac.c | 13 ++++++++++++- 3 files changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 73495f0ee13..db2dc976d83 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -600,6 +600,7 @@ enum rt2x00_flags { DEVICE_STARTED_SUSPEND, DEVICE_ENABLED_RADIO, DEVICE_DISABLED_RADIO_HW, + DEVICE_DIRTY_CONFIG, /* * Driver features diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 8c93eb8353b..f42283ad7b0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -1013,6 +1013,7 @@ int rt2x00lib_start(struct rt2x00_dev *rt2x00dev) rt2x00dev->intf_associated = 0; __set_bit(DEVICE_STARTED, &rt2x00dev->flags); + __set_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags); return 0; } @@ -1237,9 +1238,9 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) /* * Reconfigure device. */ - rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1); - if (!rt2x00dev->hw->conf.radio_enabled) - rt2x00lib_disable_radio(rt2x00dev); + retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf); + if (retval) + goto exit; /* * Iterator over each active interface to diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 1f83d5fbf6b..042ab00d8bd 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -310,6 +310,7 @@ EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface); int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) { struct rt2x00_dev *rt2x00dev = hw->priv; + int force_reconfig; /* * Mac80211 might be calling this function while we are trying @@ -329,7 +330,17 @@ int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); } - rt2x00lib_config(rt2x00dev, conf, 0); + /* + * When the DEVICE_DIRTY_CONFIG flag is set, the device has recently + * been started and the configuration must be forced upon the hardware. + * Otherwise registers will not be intialized correctly and could + * result in non-working hardware because essential registers aren't + * initialized. + */ + force_reconfig = + __test_and_clear_bit(DEVICE_DIRTY_CONFIG, &rt2x00dev->flags); + + rt2x00lib_config(rt2x00dev, conf, force_reconfig); /* * Reenable RX only if the radio should be on. -- GitLab From 9c0ab712c7e40b61063431cae74a3e763535a4e7 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 21 Jul 2008 19:06:02 +0200 Subject: [PATCH 0264/1024] rt2x00: Clear queue entry flags during initialization When the queues are being initialized the entry flags fields must be reset to 0. When this does not happen some entries might still be marked as "occupied" after an ifdown & ifup cycle which would trigger errors when the entry is being accessed: phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 0. Please file bug report to http://rt2x00.serialmonkey.com. This also fixes the mac80211 warning: ------------[ cut here ]------------ WARNING: at net/mac80211/tx.c:1238 ieee80211_master_start_xmit+0x30a/0x350 [mac80211]() which was triggered by the queue error. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00queue.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 7b581a370fd..3b27f6aa860 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -492,9 +492,12 @@ void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev) if (!rt2x00dev->ops->lib->init_rxentry) return; - for (i = 0; i < queue->limit; i++) + for (i = 0; i < queue->limit; i++) { + queue->entries[i].flags = 0; + rt2x00dev->ops->lib->init_rxentry(rt2x00dev, &queue->entries[i]); + } } void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev) @@ -508,9 +511,12 @@ void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev) if (!rt2x00dev->ops->lib->init_txentry) continue; - for (i = 0; i < queue->limit; i++) + for (i = 0; i < queue->limit; i++) { + queue->entries[i].flags = 0; + rt2x00dev->ops->lib->init_txentry(rt2x00dev, &queue->entries[i]); + } } } -- GitLab From 1b0241656b658522a15e7aad570cb8ea6b255a2a Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 14 Jul 2008 12:43:23 +0200 Subject: [PATCH 0265/1024] mac80211: tx, use dev_kfree_skb_any for beacon_get Use dev_kfree_skb_any(); instead of dev_kfree_skb();, since ieee80211_beacon_get function might be called from atomic. (It's in a fail path.) Signed-off-by: Jiri Slaby Cc: Johannes Berg Cc: Michael Wu Signed-off-by: John W. Linville --- net/mac80211/tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 0fbadd8b983..7e99d161519 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1931,7 +1931,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, "no rate found\n", wiphy_name(local->hw.wiphy)); } - dev_kfree_skb(skb); + dev_kfree_skb_any(skb); skb = NULL; goto out; } -- GitLab From 023a04bebe7030c1e6d5347bd3f27a3e49a1f222 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 14 Jul 2008 12:52:08 -0700 Subject: [PATCH 0266/1024] mac80211: return correct error return from ieee80211_wep_init Return the proper error code rather than a hard-coded ENOMEM from ieee80211_wep_init. Also, print the error code on failure. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: John W. Linville --- net/mac80211/main.c | 4 ++-- net/mac80211/wep.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index f1a83d450ea..b5830f7055c 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1731,8 +1731,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) result = ieee80211_wep_init(local); if (result < 0) { - printk(KERN_DEBUG "%s: Failed to initialize wep\n", - wiphy_name(local->hw.wiphy)); + printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", + wiphy_name(local->hw.wiphy), result); goto fail_wep; } diff --git a/net/mac80211/wep.c b/net/mac80211/wep.c index 872d2fcd1a5..5c2bf0a3d4d 100644 --- a/net/mac80211/wep.c +++ b/net/mac80211/wep.c @@ -31,13 +31,13 @@ int ieee80211_wep_init(struct ieee80211_local *local) local->wep_tx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC); if (IS_ERR(local->wep_tx_tfm)) - return -ENOMEM; + return PTR_ERR(local->wep_tx_tfm); local->wep_rx_tfm = crypto_alloc_blkcipher("ecb(arc4)", 0, CRYPTO_ALG_ASYNC); if (IS_ERR(local->wep_rx_tfm)) { crypto_free_blkcipher(local->wep_tx_tfm); - return -ENOMEM; + return PTR_ERR(local->wep_rx_tfm); } return 0; -- GitLab From 031211049b71619f7e776521963c082ca453d9fd Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 22 Jul 2008 23:50:04 -0700 Subject: [PATCH 0267/1024] drivers/net/wireless/iwlwifi/iwl-led.c: printk fix ia64: drivers/net/wireless/iwlwifi/iwl-led.c: In function `iwl_get_blink_rate': drivers/net/wireless/iwlwifi/iwl-led.c:271: warning: long long int format, s64 arg (arg 6) drivers/net/wireless/iwlwifi/iwl-led.c:271: warning: long long int format, u64 arg (arg 7) We do not know what type the architecture uses to impement u64 and s64, hence we must cast the variables for printing. Cc: Tomas Winkler Cc: John W. Linville Cc: Zhu Yi Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-led.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c index 899d7a2567a..61250e6a7d1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-led.c @@ -268,7 +268,9 @@ static int iwl_get_blink_rate(struct iwl_priv *priv) if (tpt < 0) /* wrapparound */ tpt = -tpt; - IWL_DEBUG_LED("tpt %lld current_tpt %lld\n", tpt, current_tpt); + IWL_DEBUG_LED("tpt %lld current_tpt %llu\n", + (long long)tpt, + (unsigned long long)current_tpt); priv->led_tpt = current_tpt; if (!priv->allow_blinking) -- GitLab From 0b06b2ae0e474fc6378117c832bcd94785a9e975 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 23 Jul 2008 18:36:38 -0700 Subject: [PATCH 0268/1024] mac80211: fix sparse integer as NULL pointer warning drivers/net/wireless/mac80211_hwsim.c:503:20: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison Signed-off-by: John W. Linville --- drivers/net/wireless/mac80211_hwsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 5816230d58f..248d31a7aa3 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -500,7 +500,7 @@ failed_hw: device_unregister(data->dev); failed_drvdata: ieee80211_free_hw(hw); - hwsim_radios[i] = 0; + hwsim_radios[i] = NULL; failed: mac80211_hwsim_free(); return err; -- GitLab From 5422399518e8142198df888aab00acdac251f754 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Thu, 24 Jul 2008 10:40:37 +0300 Subject: [PATCH 0269/1024] mac80211: append CONFIG_ to MAC80211_VERBOSE_PS_DEBUG in net/mac80211/tx.c. In net/mac80211/tx.c, there are some #ifdef which checks MAC80211_VERBOSE_PS_DEBUG (which in fact is never set) instead of CONFIG_MAC80211_VERBOSE_PS_DEBUG, as should be. This patch replaces MAC80211_VERBOSE_PS_DEBUG with CONFIG_MAC80211_VERBOSE_PS_DEBUG in these #ifdef commands in net/mac80211/tx.c. Signed-off-by: Rami Rosen Signed-off-by: John W. Linville --- net/mac80211/tx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 7e99d161519..c5f78059c6c 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -305,7 +305,7 @@ static void purge_old_ps_buffers(struct ieee80211_local *local) rcu_read_unlock(); local->total_ps_buffered = total; -#ifdef MAC80211_VERBOSE_PS_DEBUG +#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n", wiphy_name(local->hw.wiphy), purged); #endif @@ -342,7 +342,7 @@ ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx) purge_old_ps_buffers(tx->local); if (skb_queue_len(&tx->sdata->bss->ps_bc_buf) >= AP_MAX_BC_BUFFER) { -#ifdef MAC80211_VERBOSE_PS_DEBUG +#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG if (net_ratelimit()) { printk(KERN_DEBUG "%s: BC TX buffer full - " "dropping the oldest frame\n", @@ -389,7 +389,7 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) purge_old_ps_buffers(tx->local); if (skb_queue_len(&sta->ps_tx_buf) >= STA_MAX_TX_BUFFER) { struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf); -#ifdef MAC80211_VERBOSE_PS_DEBUG +#ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG if (net_ratelimit()) { printk(KERN_DEBUG "%s: STA %s TX " "buffer full - dropping oldest frame\n", -- GitLab From 1f690d7b549ef9c7424536475501885dd5b54930 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 28 Jul 2008 22:08:18 -0500 Subject: [PATCH 0270/1024] rtl8187: Fix for TX sequence number problem "mac80211: fix TX sequence numbers" broke rtl8187. This patch makes the same kind of fix that was done for rt2x00. Note that this code will have to be reworked for proper sequence numbers on beacons. In addition, the sequence number has been placed in the hardware state, not the vif state. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187.h | 1 + drivers/net/wireless/rtl8187_dev.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h index 3afb49f8866..8961901b5c0 100644 --- a/drivers/net/wireless/rtl8187.h +++ b/drivers/net/wireless/rtl8187.h @@ -100,6 +100,7 @@ struct rtl8187_priv { struct usb_device *udev; u32 rx_conf; u16 txpwr_base; + u16 seqno; u8 asic_rev; u8 is_rtl8187b; enum { diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index d3067b1216c..7ff03aca251 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -169,6 +169,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) { struct rtl8187_priv *priv = dev->priv; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; unsigned int ep; void *buf; struct urb *urb; @@ -234,6 +235,20 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) ep = epmap[skb_get_queue_mapping(skb)]; } + /* FIXME: The sequence that follows is needed for this driver to + * work with mac80211 since "mac80211: fix TX sequence numbers". + * As with the temporary code in rt2x00, changes will be needed + * to get proper sequence numbers on beacons. In addition, this + * patch places the sequence number in the hardware state, which + * limits us to a single virtual state. + */ + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + priv->seqno += 0x10; + ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + ieee80211hdr->seq_ctrl |= cpu_to_le16(priv->seqno); + } + info->driver_data[0] = dev; info->driver_data[1] = urb; -- GitLab From 0ccd58fc03f40529f66190b1a41e92a732d2bda8 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 28 Jul 2008 22:25:08 -0500 Subject: [PATCH 0271/1024] rtl8187: Improve wireless statistics for RTL8187B Wireless statistics produced by the RTL8187B driver are not particularly informative about the strength of the received signal. From the data sheet provided by Realtek, I discovered that certain parts of the RX header should have the information necessary to calculate signal quality and strength. With testing, it became clear that most of these quantities were very jittery - only the AGC correlated with the signals expected from nearby AP's. As a result, the quality and strength are derived from the agc value. The scaling has been determined so that the numbers are close to those obtained by b43 under the same conditions. The results are qualitatively correct. Statistics derived for the RTL8187 have not been changed. The RX header variables have been renamed to match the quantites described in the Realtek data sheet. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187.h | 10 ++-- drivers/net/wireless/rtl8187_dev.c | 78 ++++++++++++++++++------------ 2 files changed, 54 insertions(+), 34 deletions(-) diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h index 8961901b5c0..1b0d750f662 100644 --- a/drivers/net/wireless/rtl8187.h +++ b/drivers/net/wireless/rtl8187.h @@ -47,11 +47,13 @@ struct rtl8187_rx_hdr { struct rtl8187b_rx_hdr { __le32 flags; __le64 mac_time; - u8 noise; - u8 signal; + u8 sq; + u8 rssi; u8 agc; - u8 reserved; - __le32 unused; + u8 flags2; + __le16 snr_long2end; + s8 pwdb_g12; + u8 fot; } __attribute__((packed)); /* {rtl8187,rtl8187b}_tx_info is in skb */ diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 7ff03aca251..177988efd66 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -272,6 +272,7 @@ static void rtl8187_rx_cb(struct urb *urb) struct ieee80211_rx_status rx_status = { 0 }; int rate, signal; u32 flags; + u32 quality; spin_lock(&priv->rx_queue.lock); if (skb->next) @@ -295,44 +296,57 @@ static void rtl8187_rx_cb(struct urb *urb) flags = le32_to_cpu(hdr->flags); signal = hdr->signal & 0x7f; rx_status.antenna = (hdr->signal >> 7) & 1; - rx_status.signal = signal; rx_status.noise = hdr->noise; rx_status.mactime = le64_to_cpu(hdr->mac_time); - priv->signal = signal; priv->quality = signal; + rx_status.qual = priv->quality; priv->noise = hdr->noise; + rate = (flags >> 20) & 0xF; + if (rate > 3) { /* OFDM rate */ + if (signal > 90) + signal = 90; + else if (signal < 25) + signal = 25; + signal = 90 - signal; + } else { /* CCK rate */ + if (signal > 95) + signal = 95; + else if (signal < 30) + signal = 30; + signal = 95 - signal; + } + rx_status.signal = signal; + priv->signal = signal; } else { struct rtl8187b_rx_hdr *hdr = (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr)); + /* The Realtek datasheet for the RTL8187B shows that the RX + * header contains the following quantities: signal quality, + * RSSI, AGC, the received power in dB, and the measured SNR. + * In testing, none of these quantities show qualitative + * agreement with AP signal strength, except for the AGC, + * which is inversely proportional to the strength of the + * signal. In the following, the quality and signal strength + * are derived from the AGC. The arbitrary scaling constants + * are chosen to make the results close to the values obtained + * for a BCM4312 using b43 as the driver. The noise is ignored + * for now. + */ flags = le32_to_cpu(hdr->flags); - signal = hdr->agc >> 1; - rx_status.antenna = (hdr->signal >> 7) & 1; - rx_status.signal = 64 - min(hdr->noise, (u8)64); - rx_status.noise = hdr->noise; + quality = 170 - hdr->agc; + if (quality > 100) + quality = 100; + signal = 14 - hdr->agc / 2; + rx_status.qual = quality; + priv->quality = quality; + rx_status.signal = signal; + priv->signal = signal; + rx_status.antenna = (hdr->rssi >> 7) & 1; rx_status.mactime = le64_to_cpu(hdr->mac_time); - priv->signal = hdr->signal; - priv->quality = hdr->agc >> 1; - priv->noise = hdr->noise; + rate = (flags >> 20) & 0xF; } skb_trim(skb, flags & 0x0FFF); - rate = (flags >> 20) & 0xF; - if (rate > 3) { /* OFDM rate */ - if (signal > 90) - signal = 90; - else if (signal < 25) - signal = 25; - signal = 90 - signal; - } else { /* CCK rate */ - if (signal > 95) - signal = 95; - else if (signal < 30) - signal = 30; - signal = 95 - signal; - } - - rx_status.qual = priv->quality; - rx_status.signal = signal; rx_status.rate_idx = rate; rx_status.freq = dev->conf.channel->center_freq; rx_status.band = dev->conf.channel->band; @@ -1030,9 +1044,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, priv->mode = IEEE80211_IF_TYPE_MNTR; dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SIGNAL_UNSPEC; - dev->max_signal = 65; + IEEE80211_HW_RX_INCLUDES_FCS; eeprom.data = dev; eeprom.register_read = rtl8187_eeprom_register_read; @@ -1147,10 +1159,16 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, (*channel++).hw_value = txpwr >> 8; } - if (priv->is_rtl8187b) + if (priv->is_rtl8187b) { printk(KERN_WARNING "rtl8187: 8187B chip detected. Support " "is EXPERIMENTAL, and could damage your\n" " hardware, use at your own risk\n"); + dev->flags |= IEEE80211_HW_SIGNAL_DBM; + } else { + dev->flags |= IEEE80211_HW_SIGNAL_UNSPEC; + dev->max_signal = 65; + } + if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b) printk(KERN_INFO "rtl8187: inconsistency between id with OEM" " info!\n"); -- GitLab From d0f09804144fd9471a13cf4d80e66842c7fa114f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jul 2008 11:32:07 +0200 Subject: [PATCH 0272/1024] mac80211: partially fix skb->cb use This patch fixes mac80211 to not use the skb->cb over the queue step from virtual interfaces to the master. The patch also, for now, disables aggregation because that would still require requeuing, will fix that in a separate patch. There are two other places (software requeue and powersaving stations) where requeue can happen, but that is not currently used by any drivers/not possible to use respectively. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 2 +- drivers/net/wireless/b43/xmit.c | 2 +- drivers/net/wireless/b43legacy/xmit.c | 2 +- drivers/net/wireless/iwlwifi/iwl-tx.c | 2 +- drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +- drivers/net/wireless/rt2x00/rt2x00mac.c | 2 +- include/linux/skbuff.h | 5 ++- include/net/mac80211.h | 6 --- net/core/skbuff.c | 3 ++ net/mac80211/main.c | 8 +--- net/mac80211/mlme.c | 8 +--- net/mac80211/tx.c | 47 +++++++++------------ net/mac80211/wme.c | 3 ++ 13 files changed, 40 insertions(+), 52 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 1106d1c0629..ff3fad794b6 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1237,7 +1237,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) pktlen = skb->len; - if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) { + if (info->control.hw_key) { keyidx = info->control.hw_key->hw_key_idx; pktlen += info->control.icv_len; } diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 8d54502222a..9dda8169f7c 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -192,7 +192,7 @@ int b43_generate_txhdr(struct b43_wldev *dev, const struct b43_phy *phy = &dev->phy; const struct ieee80211_hdr *wlhdr = (const struct ieee80211_hdr *)fragment_data; - int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)); + int use_encryption = !!info->control.hw_key; __le16 fctl = wlhdr->frame_control; struct ieee80211_rate *fbrate; u8 rate, rate_fb; diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c index e969ed8d412..68e1f8c7872 100644 --- a/drivers/net/wireless/b43legacy/xmit.c +++ b/drivers/net/wireless/b43legacy/xmit.c @@ -192,7 +192,7 @@ static int generate_txhdr_fw3(struct b43legacy_wldev *dev, u16 cookie) { const struct ieee80211_hdr *wlhdr; - int use_encryption = (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)); + int use_encryption = !!info->control.hw_key; u16 fctl; u8 rate; struct ieee80211_rate *rate_fb; diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 9b50b1052b0..f72cd0bf6aa 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -906,7 +906,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) * first entry */ iwl_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len); - if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) + if (info->control.hw_key) iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id); /* Set up TFD's 2nd entry to point directly to remainder of skb, diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 05121f395c4..7c82ecfa30a 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -2667,7 +2667,7 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb) * first entry */ iwl3945_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len); - if (!(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) + if (info->control.hw_key) iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, 0); /* Set up TFD's 2nd entry to point directly to remainder of skb, diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 042ab00d8bd..c3ee4ecba79 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -63,7 +63,7 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, */ memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb)); rts_info = IEEE80211_SKB_CB(skb); - rts_info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + rts_info->control.hw_key = NULL; rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS; rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT; rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS; diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 7ea44f6621f..a640385e059 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -316,7 +316,10 @@ struct sk_buff { #ifdef CONFIG_IPV6_NDISC_NODETYPE __u8 ndisc_nodetype:2; #endif - /* 14 bit hole */ +#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE) + __u8 do_not_encrypt:1; +#endif + /* 0/13/14 bit hole */ #ifdef CONFIG_NET_DMA dma_cookie_t dma_cookie; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 74487f26823..b52721008be 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -206,8 +206,6 @@ struct ieee80211_bss_conf { * These flags are used with the @flags member of &ieee80211_tx_info. * * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame. - * @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption; - * e.g., for EAPOL frame * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., * for combined 802.11g / 802.11b networks) @@ -220,7 +218,6 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the * through set_retry_limit configured long retry value - * @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211 * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number @@ -253,7 +250,6 @@ struct ieee80211_bss_conf { */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), - IEEE80211_TX_CTL_DO_NOT_ENCRYPT = BIT(1), IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2), IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3), IEEE80211_TX_CTL_NO_ACK = BIT(4), @@ -263,7 +259,6 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8), IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9), IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10), - IEEE80211_TX_CTL_EAPOL_FRAME = BIT(11), IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12), IEEE80211_TX_CTL_AMPDU = BIT(13), IEEE80211_TX_CTL_OFDM_HT = BIT(14), @@ -323,7 +318,6 @@ struct ieee80211_tx_info { struct ieee80211_vif *vif; struct ieee80211_key_conf *hw_key; unsigned long jiffies; - int ifindex; u16 aid; s8 rts_cts_rate_idx, alt_retry_rate_idx; u8 retry_limit; diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 4e0c9227418..84640172d65 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -485,6 +485,9 @@ static struct sk_buff *__skb_clone(struct sk_buff *n, struct sk_buff *skb) C(head); C(data); C(truesize); +#if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE) + C(do_not_encrypt); +#endif atomic_set(&n->users, 1); atomic_inc(&(skb_shinfo(skb)->dataref)); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index b5830f7055c..a4c5b90de76 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1233,18 +1233,12 @@ static void ieee80211_tasklet_handler(unsigned long data) /* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to * make a prepared TX frame (one that has been given to hw) to look like brand * new IEEE 802.11 frame that is ready to go through TX processing again. - * Also, tx_packet_data in cb is restored from tx_control. */ + */ static void ieee80211_remove_tx_extra(struct ieee80211_local *local, struct ieee80211_key *key, struct sk_buff *skb) { int hdrlen, iv_len, mic_len; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - - info->flags &= IEEE80211_TX_CTL_REQ_TX_STATUS | - IEEE80211_TX_CTL_DO_NOT_ENCRYPT | - IEEE80211_TX_CTL_REQUEUE | - IEEE80211_TX_CTL_EAPOL_FRAME; hdrlen = ieee80211_get_hdrlen_from_skb(skb); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d7c371e36bf..35eb767cbcb 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -606,7 +606,6 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb, int encrypt) { struct ieee80211_sub_if_data *sdata; - struct ieee80211_tx_info *info; sdata = IEEE80211_DEV_TO_SUB_IF(dev); skb->dev = sdata->local->mdev; @@ -614,11 +613,8 @@ void ieee80211_sta_tx(struct net_device *dev, struct sk_buff *skb, skb_set_network_header(skb, 0); skb_set_transport_header(skb, 0); - info = IEEE80211_SKB_CB(skb); - memset(info, 0, sizeof(struct ieee80211_tx_info)); - info->control.ifindex = sdata->dev->ifindex; - if (!encrypt) - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + skb->iif = sdata->dev->ifindex; + skb->do_not_encrypt = !encrypt; dev_queue_xmit(skb); } diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index c5f78059c6c..69019e94387 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -439,14 +439,14 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); u16 fc = tx->fc; - if (unlikely(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT)) + if (unlikely(tx->skb->do_not_encrypt)) tx->key = NULL; else if (tx->sta && (key = rcu_dereference(tx->sta->key))) tx->key = key; else if ((key = rcu_dereference(tx->sdata->default_key))) tx->key = key; else if (tx->sdata->drop_unencrypted && - !(info->flags & IEEE80211_TX_CTL_EAPOL_FRAME) && + (tx->skb->protocol != cpu_to_be16(ETH_P_PAE)) && !(info->flags & IEEE80211_TX_CTL_INJECTED)) { I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted); return TX_DROP; @@ -476,7 +476,7 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) } if (!tx->key || !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + tx->skb->do_not_encrypt = 1; return TX_CONTINUE; } @@ -732,6 +732,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) memcpy(skb_put(frag, copylen), pos, copylen); memcpy(frag->cb, first->cb, sizeof(frag->cb)); skb_copy_queue_mapping(frag, first); + frag->do_not_encrypt = first->do_not_encrypt; pos += copylen; left -= copylen; @@ -852,7 +853,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx, sband = tx->local->hw.wiphy->bands[tx->channel->band]; - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + skb->do_not_encrypt = 1; info->flags |= IEEE80211_TX_CTL_INJECTED; tx->flags &= ~IEEE80211_TX_FRAGMENTED; @@ -925,8 +926,7 @@ __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx, skb_trim(skb, skb->len - FCS_LEN); } if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP) - info->flags &= - ~IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + tx->skb->do_not_encrypt = 0; if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG) tx->flags |= IEEE80211_TX_FRAGMENTED; break; @@ -1042,10 +1042,9 @@ static int ieee80211_tx_prepare(struct ieee80211_tx_data *tx, struct sk_buff *skb, struct net_device *mdev) { - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct net_device *dev; - dev = dev_get_by_index(&init_net, info->control.ifindex); + dev = dev_get_by_index(&init_net, skb->iif); if (unlikely(dev && !is_ieee80211_device(dev, mdev))) { dev_put(dev); dev = NULL; @@ -1306,8 +1305,8 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, bool may_encrypt; int ret; - if (info->control.ifindex) - odev = dev_get_by_index(&init_net, info->control.ifindex); + if (skb->iif) + odev = dev_get_by_index(&init_net, skb->iif); if (unlikely(odev && !is_ieee80211_device(odev, dev))) { dev_put(odev); odev = NULL; @@ -1321,9 +1320,13 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, return 0; } + memset(info, 0, sizeof(*info)); + + info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; + osdata = IEEE80211_DEV_TO_SUB_IF(odev); - may_encrypt = !(info->flags & IEEE80211_TX_CTL_DO_NOT_ENCRYPT); + may_encrypt = !skb->do_not_encrypt; headroom = osdata->local->tx_headroom; if (may_encrypt) @@ -1348,7 +1351,6 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_radiotap_header *prthdr = (struct ieee80211_radiotap_header *)skb->data; u16 len_rthdr; @@ -1371,11 +1373,11 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb, skb->dev = local->mdev; /* needed because we set skb device to master */ - info->control.ifindex = dev->ifindex; + skb->iif = dev->ifindex; - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; - /* Interfaces should always request a status report */ - info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; + /* sometimes we do encrypt injected frames, will be fixed + * up in radiotap parser if not wanted */ + skb->do_not_encrypt = 0; /* * fix up the pointers accounting for the radiotap @@ -1419,7 +1421,6 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_tx_info *info; struct ieee80211_sub_if_data *sdata; int ret = 1, head_need; u16 ethertype, hdrlen, meshhdrlen = 0; @@ -1645,14 +1646,7 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, nh_pos += hdrlen; h_pos += hdrlen; - info = IEEE80211_SKB_CB(skb); - memset(info, 0, sizeof(*info)); - info->control.ifindex = dev->ifindex; - if (ethertype == ETH_P_PAE) - info->flags |= IEEE80211_TX_CTL_EAPOL_FRAME; - - /* Interfaces should always request a status report */ - info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; + skb->iif = dev->ifindex; skb->dev = local->mdev; dev->stats.tx_packets++; @@ -1922,6 +1916,8 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, info = IEEE80211_SKB_CB(skb); + skb->do_not_encrypt = 1; + info->band = band; rate_control_get_rate(local->mdev, sband, skb, &rsel); @@ -1940,7 +1936,6 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, info->tx_rate_idx = rsel.rate_idx; info->flags |= IEEE80211_TX_CTL_NO_ACK; - info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; if (sdata->bss_conf.use_short_preamble && diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 07edda0b8a5..28437f0001d 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -188,6 +188,9 @@ int ieee80211_ht_agg_queue_add(struct ieee80211_local *local, { int i; + /* XXX: currently broken due to cb/requeue use */ + return -EPERM; + /* prepare the filter and save it for the SW queue * matching the received HW queue */ -- GitLab From bba95fefb8e31f4799652666d05a4a9aad56e492 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jul 2008 13:22:51 +0200 Subject: [PATCH 0273/1024] nl80211: fix dump callbacks Julius Volz pointed out that the dump callbacks in nl80211 were broken and fixed one of them. This patch fixes the other three and also addresses the TODOs there. Signed-off-by: Johannes Berg Cc: Julius Volz Cc: Thomas Graf Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 275 +++++++++++++++++++++++------------------ 1 file changed, 153 insertions(+), 122 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b7fefffd2d0..59eb2cf42e5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -29,16 +29,16 @@ static struct genl_family nl80211_fam = { }; /* internal helper: get drv and dev */ -static int get_drv_dev_by_info_ifindex(struct genl_info *info, +static int get_drv_dev_by_info_ifindex(struct nlattr **attrs, struct cfg80211_registered_device **drv, struct net_device **dev) { int ifindex; - if (!info->attrs[NL80211_ATTR_IFINDEX]) + if (!attrs[NL80211_ATTR_IFINDEX]) return -EINVAL; - ifindex = nla_get_u32(info->attrs[NL80211_ATTR_IFINDEX]); + ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]); *dev = dev_get_by_index(&init_net, ifindex); if (!*dev) return -ENODEV; @@ -291,21 +291,31 @@ static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback * mutex_lock(&cfg80211_drv_mutex); list_for_each_entry(dev, &cfg80211_drv_list, list) { - if (++wp_idx < wp_start) + if (wp_idx < wp_start) { + wp_idx++; continue; + } if_idx = 0; mutex_lock(&dev->devlist_mtx); list_for_each_entry(wdev, &dev->netdev_list, list) { - if (++if_idx < if_start) + if (if_idx < if_start) { + if_idx++; continue; + } if (nl80211_send_iface(skb, NETLINK_CB(cb->skb).pid, cb->nlh->nlmsg_seq, NLM_F_MULTI, - wdev->netdev) < 0) - break; + wdev->netdev) < 0) { + mutex_unlock(&dev->devlist_mtx); + goto out; + } + if_idx++; } mutex_unlock(&dev->devlist_mtx); + + wp_idx++; } + out: mutex_unlock(&cfg80211_drv_mutex); cb->args[0] = wp_idx; @@ -321,7 +331,7 @@ static int nl80211_get_interface(struct sk_buff *skb, struct genl_info *info) struct net_device *netdev; int err; - err = get_drv_dev_by_info_ifindex(info, &dev, &netdev); + err = get_drv_dev_by_info_ifindex(info->attrs, &dev, &netdev); if (err) return err; @@ -392,7 +402,7 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info) } else return -EINVAL; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; ifindex = dev->ifindex; @@ -477,7 +487,7 @@ static int nl80211_del_interface(struct sk_buff *skb, struct genl_info *info) int ifindex, err; struct net_device *dev; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; ifindex = dev->ifindex; @@ -545,7 +555,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NL80211_ATTR_MAC]) mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -618,7 +628,7 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info) if (!info->attrs[NL80211_ATTR_KEY_DEFAULT]) return -EINVAL; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -699,7 +709,7 @@ static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info) return -EINVAL; } - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -735,7 +745,7 @@ static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NL80211_ATTR_MAC]) mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -764,7 +774,7 @@ static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info) struct beacon_parameters params; int haveinfo = 0; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -843,7 +853,7 @@ static int nl80211_del_beacon(struct sk_buff *skb, struct genl_info *info) int err; struct net_device *dev; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -937,67 +947,78 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq, } static int nl80211_dump_station(struct sk_buff *skb, - struct netlink_callback *cb) + struct netlink_callback *cb) { - int wp_idx = 0; - int if_idx = 0; - int sta_idx = cb->args[2]; - int wp_start = cb->args[0]; - int if_start = cb->args[1]; struct station_info sinfo; struct cfg80211_registered_device *dev; - struct wireless_dev *wdev; + struct net_device *netdev; u8 mac_addr[ETH_ALEN]; + int ifidx = cb->args[0]; + int sta_idx = cb->args[1]; int err; - int exit = 0; - /* TODO: filter by device */ - mutex_lock(&cfg80211_drv_mutex); - list_for_each_entry(dev, &cfg80211_drv_list, list) { - if (exit) + if (!ifidx) { + err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, + nl80211_fam.attrbuf, nl80211_fam.maxattr, + nl80211_policy); + if (err) + return err; + + if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]) + return -EINVAL; + + ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]); + if (!ifidx) + return -EINVAL; + } + + netdev = dev_get_by_index(&init_net, ifidx); + if (!netdev) + return -ENODEV; + + dev = cfg80211_get_dev_from_ifindex(ifidx); + if (IS_ERR(dev)) { + err = PTR_ERR(dev); + goto out_put_netdev; + } + + if (!dev->ops->dump_station) { + err = -ENOSYS; + goto out_err; + } + + rtnl_lock(); + + while (1) { + err = dev->ops->dump_station(&dev->wiphy, netdev, sta_idx, + mac_addr, &sinfo); + if (err == -ENOENT) break; - if (++wp_idx < wp_start) - continue; - if_idx = 0; + if (err) + goto out_err_rtnl; - mutex_lock(&dev->devlist_mtx); - list_for_each_entry(wdev, &dev->netdev_list, list) { - if (exit) - break; - if (++if_idx < if_start) - continue; - if (!dev->ops->dump_station) - continue; + if (nl80211_send_station(skb, + NETLINK_CB(cb->skb).pid, + cb->nlh->nlmsg_seq, NLM_F_MULTI, + netdev, mac_addr, + &sinfo) < 0) + goto out; - for (;; ++sta_idx) { - rtnl_lock(); - err = dev->ops->dump_station(&dev->wiphy, - wdev->netdev, sta_idx, mac_addr, - &sinfo); - rtnl_unlock(); - if (err) { - sta_idx = 0; - break; - } - if (nl80211_send_station(skb, - NETLINK_CB(cb->skb).pid, - cb->nlh->nlmsg_seq, NLM_F_MULTI, - wdev->netdev, mac_addr, - &sinfo) < 0) { - exit = 1; - break; - } - } - } - mutex_unlock(&dev->devlist_mtx); + sta_idx++; } - mutex_unlock(&cfg80211_drv_mutex); - cb->args[0] = wp_idx; - cb->args[1] = if_idx; - cb->args[2] = sta_idx; - return skb->len; + out: + cb->args[1] = sta_idx; + err = skb->len; + out_err_rtnl: + rtnl_unlock(); + out_err: + cfg80211_put_dev(dev); + out_put_netdev: + dev_put(netdev); + + return err; } static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info) @@ -1016,7 +1037,7 @@ static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info) mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1112,7 +1133,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) params.plink_action = nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1172,7 +1193,7 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) ¶ms.station_flags)) return -EINVAL; - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1207,7 +1228,7 @@ static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NL80211_ATTR_MAC]) mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1277,68 +1298,78 @@ static int nl80211_send_mpath(struct sk_buff *msg, u32 pid, u32 seq, } static int nl80211_dump_mpath(struct sk_buff *skb, - struct netlink_callback *cb) + struct netlink_callback *cb) { - int wp_idx = 0; - int if_idx = 0; - int sta_idx = cb->args[2]; - int wp_start = cb->args[0]; - int if_start = cb->args[1]; struct mpath_info pinfo; struct cfg80211_registered_device *dev; - struct wireless_dev *wdev; + struct net_device *netdev; u8 dst[ETH_ALEN]; u8 next_hop[ETH_ALEN]; + int ifidx = cb->args[0]; + int path_idx = cb->args[1]; int err; - int exit = 0; - /* TODO: filter by device */ - mutex_lock(&cfg80211_drv_mutex); - list_for_each_entry(dev, &cfg80211_drv_list, list) { - if (exit) + if (!ifidx) { + err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, + nl80211_fam.attrbuf, nl80211_fam.maxattr, + nl80211_policy); + if (err) + return err; + + if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]) + return -EINVAL; + + ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]); + if (!ifidx) + return -EINVAL; + } + + netdev = dev_get_by_index(&init_net, ifidx); + if (!netdev) + return -ENODEV; + + dev = cfg80211_get_dev_from_ifindex(ifidx); + if (IS_ERR(dev)) { + err = PTR_ERR(dev); + goto out_put_netdev; + } + + if (!dev->ops->dump_mpath) { + err = -ENOSYS; + goto out_err; + } + + rtnl_lock(); + + while (1) { + err = dev->ops->dump_mpath(&dev->wiphy, netdev, path_idx, + dst, next_hop, &pinfo); + if (err == -ENOENT) break; - if (++wp_idx < wp_start) - continue; - if_idx = 0; + if (err) + goto out_err_rtnl; - mutex_lock(&dev->devlist_mtx); - list_for_each_entry(wdev, &dev->netdev_list, list) { - if (exit) - break; - if (++if_idx < if_start) - continue; - if (!dev->ops->dump_mpath) - continue; + if (nl80211_send_mpath(skb, NETLINK_CB(cb->skb).pid, + cb->nlh->nlmsg_seq, NLM_F_MULTI, + netdev, dst, next_hop, + &pinfo) < 0) + goto out; - for (;; ++sta_idx) { - rtnl_lock(); - err = dev->ops->dump_mpath(&dev->wiphy, - wdev->netdev, sta_idx, dst, - next_hop, &pinfo); - rtnl_unlock(); - if (err) { - sta_idx = 0; - break; - } - if (nl80211_send_mpath(skb, - NETLINK_CB(cb->skb).pid, - cb->nlh->nlmsg_seq, NLM_F_MULTI, - wdev->netdev, dst, next_hop, - &pinfo) < 0) { - exit = 1; - break; - } - } - } - mutex_unlock(&dev->devlist_mtx); + path_idx++; } - mutex_unlock(&cfg80211_drv_mutex); - cb->args[0] = wp_idx; - cb->args[1] = if_idx; - cb->args[2] = sta_idx; - return skb->len; + out: + cb->args[1] = path_idx; + err = skb->len; + out_err_rtnl: + rtnl_unlock(); + out_err: + cfg80211_put_dev(dev); + out_put_netdev: + dev_put(netdev); + + return err; } static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info) @@ -1358,7 +1389,7 @@ static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info) dst = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1411,7 +1442,7 @@ static int nl80211_set_mpath(struct sk_buff *skb, struct genl_info *info) dst = nla_data(info->attrs[NL80211_ATTR_MAC]); next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1446,7 +1477,7 @@ static int nl80211_new_mpath(struct sk_buff *skb, struct genl_info *info) dst = nla_data(info->attrs[NL80211_ATTR_MAC]); next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; @@ -1475,7 +1506,7 @@ static int nl80211_del_mpath(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NL80211_ATTR_MAC]) dst = nla_data(info->attrs[NL80211_ATTR_MAC]); - err = get_drv_dev_by_info_ifindex(info, &drv, &dev); + err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev); if (err) return err; -- GitLab From 14db74bcc3f7a779cf395a47e26b06a28207571a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Jul 2008 13:22:52 +0200 Subject: [PATCH 0274/1024] mac80211: fix cfg80211 hooks for master interface The master interface is a virtual interface that is registered to mac80211, changing that does not seem like a good idea at the moment. However, since it has no sdata, we cannot accept any configuration for it. This patch makes the cfg80211 hooks reject any such attempt. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 103 ++++++++++++++++++++++++++++++++++++++------- 1 file changed, 88 insertions(+), 15 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 8e7ba0e62cf..297c257864c 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -81,6 +81,7 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex, enum nl80211_iftype type, u32 *flags, struct vif_params *params) { + struct ieee80211_local *local = wiphy_priv(wiphy); struct net_device *dev; enum ieee80211_if_types itype; struct ieee80211_sub_if_data *sdata; @@ -95,6 +96,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy, int ifindex, if (itype == IEEE80211_IF_TYPE_INVALID) return -EINVAL; + if (dev == local->mdev) + return -EOPNOTSUPP; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); ret = ieee80211_if_change_type(sdata, itype); @@ -117,12 +121,16 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, u8 key_idx, u8 *mac_addr, struct key_params *params) { + struct ieee80211_local *local = wiphy_priv(wiphy); struct ieee80211_sub_if_data *sdata; struct sta_info *sta = NULL; enum ieee80211_key_alg alg; struct ieee80211_key *key; int err; + if (dev == local->mdev) + return -EOPNOTSUPP; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); switch (params->cipher) { @@ -167,10 +175,14 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev, u8 key_idx, u8 *mac_addr) { + struct ieee80211_local *local = wiphy_priv(wiphy); struct ieee80211_sub_if_data *sdata; struct sta_info *sta; int ret; + if (dev == local->mdev) + return -EOPNOTSUPP; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); rcu_read_lock(); @@ -211,7 +223,8 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev, void (*callback)(void *cookie, struct key_params *params)) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct sta_info *sta = NULL; u8 seq[6] = {0}; struct key_params params; @@ -220,6 +233,11 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev, u16 iv16; int err = -ENOENT; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + rcu_read_lock(); if (mac_addr) { @@ -293,8 +311,12 @@ static int ieee80211_config_default_key(struct wiphy *wiphy, struct net_device *dev, u8 key_idx) { + struct ieee80211_local *local = wiphy_priv(wiphy); struct ieee80211_sub_if_data *sdata; + if (dev == local->mdev) + return -EOPNOTSUPP; + rcu_read_lock(); sdata = IEEE80211_DEV_TO_SUB_IF(dev); @@ -475,9 +497,15 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata, static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev, struct beacon_parameters *params) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct beacon_data *old; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_AP) return -EINVAL; @@ -492,9 +520,15 @@ static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev, struct beacon_parameters *params) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct beacon_data *old; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_AP) return -EINVAL; @@ -508,9 +542,15 @@ static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct beacon_data *old; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_AP) return -EINVAL; @@ -646,11 +686,14 @@ static void sta_apply_parameters(struct ieee80211_local *local, static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, u8 *mac, struct station_parameters *params) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_local *local = wiphy_priv(wiphy); struct sta_info *sta; struct ieee80211_sub_if_data *sdata; int err; + if (dev == local->mdev || params->vlan == local->mdev) + return -EOPNOTSUPP; + /* Prevent a race with changing the rate control algorithm */ if (!netif_running(dev)) return -ENETDOWN; @@ -701,10 +744,15 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev, u8 *mac) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); - struct ieee80211_local *local = sdata->local; + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct sta_info *sta; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (mac) { rcu_read_lock(); @@ -730,10 +778,13 @@ static int ieee80211_change_station(struct wiphy *wiphy, u8 *mac, struct station_parameters *params) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_local *local = wiphy_priv(wiphy); struct sta_info *sta; struct ieee80211_sub_if_data *vlansdata; + if (dev == local->mdev || params->vlan == local->mdev) + return -EOPNOTSUPP; + rcu_read_lock(); /* XXX: get sta belonging to dev */ @@ -752,7 +803,7 @@ static int ieee80211_change_station(struct wiphy *wiphy, return -EINVAL; } - sta->sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); + sta->sdata = vlansdata; ieee80211_send_layer2_update(sta); } @@ -767,15 +818,20 @@ static int ieee80211_change_station(struct wiphy *wiphy, static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev, u8 *dst, u8 *next_hop) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct mesh_path *mpath; struct sta_info *sta; int err; + if (dev == local->mdev) + return -EOPNOTSUPP; + if (!netif_running(dev)) return -ENETDOWN; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT) return -ENOTSUPP; @@ -817,14 +873,19 @@ static int ieee80211_change_mpath(struct wiphy *wiphy, struct net_device *dev, u8 *dst, u8 *next_hop) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct mesh_path *mpath; struct sta_info *sta; + if (dev == local->mdev) + return -EOPNOTSUPP; + if (!netif_running(dev)) return -ENETDOWN; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT) return -ENOTSUPP; @@ -891,9 +952,15 @@ static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev, u8 *dst, u8 *next_hop, struct mpath_info *pinfo) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct mesh_path *mpath; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT) return -ENOTSUPP; @@ -913,9 +980,15 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev, int idx, u8 *dst, u8 *next_hop, struct mpath_info *pinfo) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wiphy_priv(wiphy); + struct ieee80211_sub_if_data *sdata; struct mesh_path *mpath; + if (dev == local->mdev) + return -EOPNOTSUPP; + + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + if (sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT) return -ENOTSUPP; -- GitLab From 77bbadd5ea893f364a0d1879723037678a03725c Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 29 Jul 2008 13:31:47 +0200 Subject: [PATCH 0275/1024] PS3: gelic: use unsigned long for irqflags The semantic patch I used was this: @@ expression lock; identifier flags; expression subclass; @@ - unsigned int flags; + unsigned long flags; ... <+... ( spin_lock_irqsave(lock, flags) | _spin_lock_irqsave(lock) | spin_unlock_irqrestore(lock, flags) | _spin_unlock_irqrestore(lock, flags) | read_lock_irqsave(lock, flags) | _read_lock_irqsave(lock) | read_unlock_irqrestore(lock, flags) | _read_unlock_irqrestore(lock, flags) | write_lock_irqsave(lock, flags) | _write_lock_irqsave(lock) | write_unlock_irqrestore(lock, flags) | _write_unlock_irqrestore(lock, flags) | spin_lock_irqsave_nested(lock, flags, subclass) | _spin_lock_irqsave_nested(lock, subclass) | spin_unlock_irqrestore(lock, flags) | _spin_unlock_irqrestore(lock, flags) | _raw_spin_lock_flags(lock, flags) | __raw_spin_lock_flags(lock, flags) ) ...+> This patch was generated using the Coccinelle framework. Cc: Masakazu Mokuno Cc: Julia Lawall Cc: Alexey Dobriyan Signed-off-by: Vegard Nossum Signed-off-by: John W. Linville --- drivers/net/ps3_gelic_wireless.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index 6b2dee0cf3a..a834b52a6a2 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -1024,7 +1024,7 @@ static int gelic_wl_set_encode(struct net_device *netdev, struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); struct iw_point *enc = &data->encoding; __u16 flags; - unsigned int irqflag; + unsigned long irqflag; int key_index, index_specified; int ret = 0; @@ -1097,7 +1097,7 @@ static int gelic_wl_get_encode(struct net_device *netdev, { struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); struct iw_point *enc = &data->encoding; - unsigned int irqflag; + unsigned long irqflag; unsigned int key_index, index_specified; int ret = 0; @@ -1215,7 +1215,7 @@ static int gelic_wl_set_encodeext(struct net_device *netdev, struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; __u16 alg; __u16 flags; - unsigned int irqflag; + unsigned long irqflag; int key_index; int ret = 0; @@ -1303,7 +1303,7 @@ static int gelic_wl_get_encodeext(struct net_device *netdev, struct gelic_wl_info *wl = port_wl(netdev_priv(netdev)); struct iw_point *enc = &data->encoding; struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; - unsigned int irqflag; + unsigned long irqflag; int key_index; int ret = 0; int max_key_len; @@ -1426,7 +1426,7 @@ static int gelic_wl_priv_set_psk(struct net_device *net_dev, { struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev)); unsigned int len; - unsigned int irqflag; + unsigned long irqflag; int ret = 0; pr_debug("%s:<- len=%d\n", __func__, data->data.length); @@ -1467,7 +1467,7 @@ static int gelic_wl_priv_get_psk(struct net_device *net_dev, { struct gelic_wl_info *wl = port_wl(netdev_priv(net_dev)); char *p; - unsigned int irqflag; + unsigned long irqflag; unsigned int i; pr_debug("%s:<-\n", __func__); -- GitLab From 56a6d13dfd49d90d72a1a962246206719dd9d143 Mon Sep 17 00:00:00 2001 From: Luis Carlos Cobo Date: Tue, 29 Jul 2008 19:59:31 +0200 Subject: [PATCH 0276/1024] mac80211: fix mesh beaconing This patch fixes mesh beaconing, which was broken by "mac80211: revamp beacon configuration". Signed-off-by: Luis Carlos Cobo Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 35eb767cbcb..acb04133a95 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3299,6 +3299,7 @@ void ieee80211_start_mesh(struct net_device *dev) ifsta = &sdata->u.sta; ifsta->state = IEEE80211_MESH_UP; ieee80211_sta_timer((unsigned long)sdata); + ieee80211_if_config(sdata, IEEE80211_IFCC_BEACON); } #endif -- GitLab From 44051fed5763c4f55eb8a7eeae6ede52bc15f85f Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 29 Jul 2008 21:20:14 +0000 Subject: [PATCH 0277/1024] [CIFS] oid should also be checked against class in cifs asn MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The oid coming back from asn1_header_decode is a primitive object so class should be checked to be universal. Acked-by: Love Hörnquist Åstrand Signed-off-by: Steve French --- fs/cifs/asn1.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c index 6bb440b257b..669d0640b6d 100644 --- a/fs/cifs/asn1.c +++ b/fs/cifs/asn1.c @@ -494,7 +494,8 @@ decode_negTokenInit(unsigned char *security_blob, int length, /* remember to free obj->oid */ rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag); if (rc) { - if ((tag == ASN1_OJI) && (con == ASN1_PRI)) { + if ((tag == ASN1_OJI) && (con == ASN1_PRI) && + (cls == ASN1_UNI)) { rc = asn1_oid_decode(&ctx, end, &oid, &oidlen); if (rc) { rc = compare_oid(oid, oidlen, -- GitLab From 176803562b541ebf4744e44e6600fb60660255d5 Mon Sep 17 00:00:00 2001 From: Shirish Pargaonkar Date: Tue, 29 Jul 2008 21:26:13 +0000 Subject: [PATCH 0278/1024] [CIFS] cifs send2 not retrying enough in some cases on full socket There are cases in which, on a full socket which requires retry on sending data by the app (cifs in this case), that we were not retrying since we did not reinitialize a counter. This fixes the retry logic to retry up to 15 seconds on stuck sockets. Signed-off-by: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/transport.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 000ac509c98..e286db9f5ee 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -265,6 +265,7 @@ smb_send2(struct socket *ssocket, struct kvec *iov, int n_vec, cFYI(1, ("Sending smb: total_len %d", total_len)); dump_smb(smb_buffer, len); + i = 0; while (total_len) { rc = kernel_sendmsg(ssocket, &smb_msg, &iov[first_vec], n_vec - first_vec, total_len); -- GitLab From 22ae03a190011fa2241e68a6c51369d78039348e Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Fri, 25 Jul 2008 15:31:29 -0400 Subject: [PATCH 0279/1024] forcedeth bug fix: realtek phy 8211c errata This patch adds support for the realtek 8211c phy. The driver must perform a hardware reset of the phy due to an errata where the phy could not detect the link. Signed-off-by: Ayaz Abdulla Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 64 +++++++++++++++++++++++++++++++++++++---- 1 file changed, 58 insertions(+), 6 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 4ed89fa9ae4..01b38b092c7 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -333,6 +333,7 @@ enum { NvRegPowerState2 = 0x600, #define NVREG_POWERSTATE2_POWERUP_MASK 0x0F11 #define NVREG_POWERSTATE2_POWERUP_REV_A3 0x0001 +#define NVREG_POWERSTATE2_PHY_RESET 0x0004 }; /* Big endian: should work, but is untested */ @@ -529,6 +530,7 @@ union ring_type { #define PHY_REALTEK_INIT_REG4 0x14 #define PHY_REALTEK_INIT_REG5 0x18 #define PHY_REALTEK_INIT_REG6 0x11 +#define PHY_REALTEK_INIT_REG7 0x01 #define PHY_REALTEK_INIT1 0x0000 #define PHY_REALTEK_INIT2 0x8e00 #define PHY_REALTEK_INIT3 0x0001 @@ -537,6 +539,9 @@ union ring_type { #define PHY_REALTEK_INIT6 0xf5c7 #define PHY_REALTEK_INIT7 0x1000 #define PHY_REALTEK_INIT8 0x0003 +#define PHY_REALTEK_INIT9 0x0008 +#define PHY_REALTEK_INIT10 0x0005 +#define PHY_REALTEK_INIT11 0x0200 #define PHY_REALTEK_INIT_MSK1 0x0003 #define PHY_GIGABIT 0x0100 @@ -1149,6 +1154,42 @@ static int phy_init(struct net_device *dev) return PHY_ERROR; } } + if (np->phy_model == PHY_MODEL_REALTEK_8211 && + np->phy_rev == PHY_REV_REALTEK_8211C) { + u32 powerstate = readl(base + NvRegPowerState2); + + /* need to perform hw phy reset */ + powerstate |= NVREG_POWERSTATE2_PHY_RESET; + writel(powerstate, base + NvRegPowerState2); + msleep(25); + + powerstate &= ~NVREG_POWERSTATE2_PHY_RESET; + writel(powerstate, base + NvRegPowerState2); + msleep(25); + + reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ); + reg |= PHY_REALTEK_INIT9; + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, reg)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT10)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, MII_READ); + if (!(reg & PHY_REALTEK_INIT11)) { + reg |= PHY_REALTEK_INIT11; + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, reg)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + } if (np->phy_model == PHY_MODEL_REALTEK_8201) { if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 || np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 || @@ -1201,12 +1242,23 @@ static int phy_init(struct net_device *dev) mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ); mii_control |= BMCR_ANENABLE; - /* reset the phy - * (certain phys need bmcr to be setup with reset) - */ - if (phy_reset(dev, mii_control)) { - printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev)); - return PHY_ERROR; + if (np->phy_oui == PHY_OUI_REALTEK && + np->phy_model == PHY_MODEL_REALTEK_8211 && + np->phy_rev == PHY_REV_REALTEK_8211C) { + /* start autoneg since we already performed hw reset above */ + mii_control |= BMCR_ANRESTART; + if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) { + printk(KERN_INFO "%s: phy init failed\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + } else { + /* reset the phy + * (certain phys need bmcr to be setup with reset) + */ + if (phy_reset(dev, mii_control)) { + printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } } /* phy vendor specific configuration */ -- GitLab From d7b843d393cec677583e1aa971df09b140dcfd5e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 27 Jul 2008 22:45:03 +0800 Subject: [PATCH 0280/1024] Blackfin EMAC Driver: add proper __devinit/__devexit markings Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Jeff Garzik --- drivers/net/bfin_mac.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index a8ec60e1ed7..de777c28ec6 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -955,7 +955,7 @@ static int bfin_mac_close(struct net_device *dev) return 0; } -static int __init bfin_mac_probe(struct platform_device *pdev) +static int __devinit bfin_mac_probe(struct platform_device *pdev) { struct net_device *ndev; struct bfin_mac_local *lp; @@ -1081,7 +1081,7 @@ out_err_probe_mac: return rc; } -static int bfin_mac_remove(struct platform_device *pdev) +static int __devexit bfin_mac_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct bfin_mac_local *lp = netdev_priv(ndev); @@ -1128,7 +1128,7 @@ static int bfin_mac_resume(struct platform_device *pdev) static struct platform_driver bfin_mac_driver = { .probe = bfin_mac_probe, - .remove = bfin_mac_remove, + .remove = __devexit_p(bfin_mac_remove), .resume = bfin_mac_resume, .suspend = bfin_mac_suspend, .driver = { -- GitLab From a50c0c05c3bdead1ac405ca8cefd8dc290043933 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Sun, 27 Jul 2008 22:45:04 +0800 Subject: [PATCH 0281/1024] Blackfin EMAC Driver: enable TXDWA new feature for new silicon (rev > 0.2) Signed-off-by: Bryan Wu Signed-off-by: Jeff Garzik --- drivers/net/bfin_mac.c | 103 ++++++++++++++++++++++++++++++----------- 1 file changed, 77 insertions(+), 26 deletions(-) diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index de777c28ec6..ab728006cfa 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -605,36 +605,87 @@ adjust_head: static int bfin_mac_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { - unsigned int data; + u16 *data; current_tx_ptr->skb = skb; - /* - * Is skb->data always 16-bit aligned? - * Do we need to memcpy((char *)(tail->packet + 2), skb->data, len)? - */ - if ((((unsigned int)(skb->data)) & 0x02) == 2) { - /* move skb->data to current_tx_ptr payload */ - data = (unsigned int)(skb->data) - 2; - *((unsigned short *)data) = (unsigned short)(skb->len); - current_tx_ptr->desc_a.start_addr = (unsigned long)data; - /* this is important! */ - blackfin_dcache_flush_range(data, (data + (skb->len)) + 2); - + if (ANOMALY_05000285) { + /* + * TXDWA feature is not avaible to older revision < 0.3 silicon + * of BF537 + * + * Only if data buffer is ODD WORD alignment, we do not + * need to memcpy + */ + u32 data_align = (u32)(skb->data) & 0x3; + if (data_align == 0x2) { + /* move skb->data to current_tx_ptr payload */ + data = (u16 *)(skb->data) - 1; + *data = (u16)(skb->len); + current_tx_ptr->desc_a.start_addr = (u32)data; + /* this is important! */ + blackfin_dcache_flush_range((u32)data, + (u32)((u8 *)data + skb->len + 4)); + } else { + *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len); + memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data, + skb->len); + current_tx_ptr->desc_a.start_addr = + (u32)current_tx_ptr->packet; + if (current_tx_ptr->status.status_word != 0) + current_tx_ptr->status.status_word = 0; + blackfin_dcache_flush_range( + (u32)current_tx_ptr->packet, + (u32)(current_tx_ptr->packet + skb->len + 2)); + } } else { - *((unsigned short *)(current_tx_ptr->packet)) = - (unsigned short)(skb->len); - memcpy((char *)(current_tx_ptr->packet + 2), skb->data, - (skb->len)); - current_tx_ptr->desc_a.start_addr = - (unsigned long)current_tx_ptr->packet; - if (current_tx_ptr->status.status_word != 0) - current_tx_ptr->status.status_word = 0; - blackfin_dcache_flush_range((unsigned int)current_tx_ptr-> - packet, - (unsigned int)(current_tx_ptr-> - packet + skb->len) + - 2); + /* + * TXDWA feature is avaible to revision < 0.3 silicon of + * BF537 and always avaible to BF52x + */ + u32 data_align = (u32)(skb->data) & 0x3; + if (data_align == 0x0) { + u16 sysctl = bfin_read_EMAC_SYSCTL(); + sysctl |= TXDWA; + bfin_write_EMAC_SYSCTL(sysctl); + + /* move skb->data to current_tx_ptr payload */ + data = (u16 *)(skb->data) - 2; + *data = (u16)(skb->len); + current_tx_ptr->desc_a.start_addr = (u32)data; + /* this is important! */ + blackfin_dcache_flush_range( + (u32)data, + (u32)((u8 *)data + skb->len + 4)); + } else if (data_align == 0x2) { + u16 sysctl = bfin_read_EMAC_SYSCTL(); + sysctl &= ~TXDWA; + bfin_write_EMAC_SYSCTL(sysctl); + + /* move skb->data to current_tx_ptr payload */ + data = (u16 *)(skb->data) - 1; + *data = (u16)(skb->len); + current_tx_ptr->desc_a.start_addr = (u32)data; + /* this is important! */ + blackfin_dcache_flush_range( + (u32)data, + (u32)((u8 *)data + skb->len + 4)); + } else { + u16 sysctl = bfin_read_EMAC_SYSCTL(); + sysctl &= ~TXDWA; + bfin_write_EMAC_SYSCTL(sysctl); + + *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len); + memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data, + skb->len); + current_tx_ptr->desc_a.start_addr = + (u32)current_tx_ptr->packet; + if (current_tx_ptr->status.status_word != 0) + current_tx_ptr->status.status_word = 0; + blackfin_dcache_flush_range( + (u32)current_tx_ptr->packet, + (u32)(current_tx_ptr->packet + skb->len + 2)); + } } /* enable this packet's dma */ -- GitLab From ee02fee8f698aee72f43b3ee5fd818393b110402 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Sun, 27 Jul 2008 22:45:05 +0800 Subject: [PATCH 0282/1024] Blackfin EMAC Driver: Functional power management support Reprogram MAC address after resume from Suspend Mem (Blackfin Hibernate looses all CORE and SYSTEM register content) Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Jeff Garzik --- drivers/net/bfin_mac.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index ab728006cfa..70c465db17c 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -971,6 +971,7 @@ static int bfin_mac_open(struct net_device *dev) phy_start(lp->phydev); phy_write(lp->phydev, MII_BMCR, BMCR_RESET); setup_system_regs(dev); + setup_mac_addr(dev->dev_addr); bfin_mac_disable(); bfin_mac_enable(); pr_debug("hardware init finished\n"); -- GitLab From 8051367586314ab005dacead790a3b2e4e3dcc58 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Sat, 26 Jul 2008 15:40:56 -0500 Subject: [PATCH 0283/1024] cxgb3: Allow 64KB firmware images. Starting with FW version 7.0, the driver needs to allow larger images. Signed-off-by: Steve Wise Signed-off-by: Jeff Garzik --- drivers/net/cxgb3/t3_hw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 47d51788a46..04c0e90119a 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -683,7 +683,7 @@ enum { SF_ERASE_SECTOR = 0xd8, /* erase sector */ FW_FLASH_BOOT_ADDR = 0x70000, /* start address of FW in flash */ - FW_VERS_ADDR = 0x77ffc, /* flash address holding FW version */ + FW_VERS_ADDR = 0x7fffc, /* flash address holding FW version */ FW_MIN_SIZE = 8 /* at least version and csum */ }; -- GitLab From 74dfd9fb0ae390027cb5a908ab065a21158105d5 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 25 Jul 2008 11:46:46 -0700 Subject: [PATCH 0284/1024] blackfin_mac: unneeded assignment skb->dev is set by eth_type_trans already. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/bfin_mac.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 70c465db17c..3db7db1828e 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -742,7 +742,6 @@ static void bfin_mac_rx(struct net_device *dev) (unsigned long)skb->tail); dev->last_rx = jiffies; - skb->dev = dev; skb->protocol = eth_type_trans(skb, dev); #if defined(BFIN_MAC_CSUM_OFFLOAD) skb->csum = current_rx_ptr->status.ip_payload_csum; -- GitLab From c7b7b042068cd12b8b155722d24686f70b88ced1 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 24 Jul 2008 17:47:56 -0700 Subject: [PATCH 0285/1024] enc28j60: don't specify (wrong) IRQ type Recent changes to the IRQ framework have made passing the wrong trigger type to request_irq() become a fatal error. In the case of the enc28j60 driver, it stopped working in my test harness. (Specifically: the signal detects "pin change" events, both edges, not just falling edges. Similarly, other boards might route it through an inverter. Trigger type are board-specific.) This fixes that problem by the usual fix of expecting board setup code to have set up the correct IRQ trigger type. The best known example of that being x86 setup. Signed-off-by: David Brownell Signed-off-by: Jeff Garzik --- drivers/net/enc28j60.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index c05cb159c77..aa0bf6e1c69 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -1547,8 +1547,10 @@ static int __devinit enc28j60_probe(struct spi_device *spi) random_ether_addr(dev->dev_addr); enc28j60_set_hw_macaddr(dev); - ret = request_irq(spi->irq, enc28j60_irq, IRQF_TRIGGER_FALLING, - DRV_NAME, priv); + /* Board setup must set the relevant edge trigger type; + * level triggers won't currently work. + */ + ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv); if (ret < 0) { if (netif_msg_probe(priv)) dev_err(&spi->dev, DRV_NAME ": request irq %d failed " -- GitLab From dc56e634c807c6be69be8af919f20a746197b87d Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Tue, 22 Jul 2008 16:27:20 -0300 Subject: [PATCH 0286/1024] S2io: fix statistics flush after a MTU change On s2io driver, when you change the interface MTU, it invokes a card reset, which flush some statistics. This patch solves this problem, and also set the net_device->stats as the default statistics structure, instead of s2io_nic->stats. To do that, s2io_nic->stats turned into a staging area, where is saved statistics of the last hardware statistics query. So, the difference between the current hardware statistics and s2io_nic->stats, is the value that should be summed up, in order to get the correct statistics value, even after a reset. Signed-off-by: Breno Leitao Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- drivers/net/s2io.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 86d77d05190..a2b073097e5 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3143,7 +3143,7 @@ static void tx_intr_handler(struct fifo_info *fifo_data) pkt_cnt++; /* Updating the statistics block */ - nic->stats.tx_bytes += skb->len; + nic->dev->stats.tx_bytes += skb->len; nic->mac_control.stats_info->sw_stat.mem_freed += skb->truesize; dev_kfree_skb_irq(skb); @@ -4896,25 +4896,42 @@ static struct net_device_stats *s2io_get_stats(struct net_device *dev) /* Configure Stats for immediate updt */ s2io_updt_stats(sp); + /* Using sp->stats as a staging area, because reset (due to mtu + change, for example) will clear some hardware counters */ + dev->stats.tx_packets += + le32_to_cpu(mac_control->stats_info->tmac_frms) - + sp->stats.tx_packets; sp->stats.tx_packets = le32_to_cpu(mac_control->stats_info->tmac_frms); + dev->stats.tx_errors += + le32_to_cpu(mac_control->stats_info->tmac_any_err_frms) - + sp->stats.tx_errors; sp->stats.tx_errors = le32_to_cpu(mac_control->stats_info->tmac_any_err_frms); + dev->stats.rx_errors += + le64_to_cpu(mac_control->stats_info->rmac_drop_frms) - + sp->stats.rx_errors; sp->stats.rx_errors = le64_to_cpu(mac_control->stats_info->rmac_drop_frms); + dev->stats.multicast = + le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms) - + sp->stats.multicast; sp->stats.multicast = le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms); + dev->stats.rx_length_errors = + le64_to_cpu(mac_control->stats_info->rmac_long_frms) - + sp->stats.rx_length_errors; sp->stats.rx_length_errors = le64_to_cpu(mac_control->stats_info->rmac_long_frms); /* collect per-ring rx_packets and rx_bytes */ - sp->stats.rx_packets = sp->stats.rx_bytes = 0; + dev->stats.rx_packets = dev->stats.rx_bytes = 0; for (i = 0; i < config->rx_ring_num; i++) { - sp->stats.rx_packets += mac_control->rings[i].rx_packets; - sp->stats.rx_bytes += mac_control->rings[i].rx_bytes; + dev->stats.rx_packets += mac_control->rings[i].rx_packets; + dev->stats.rx_bytes += mac_control->rings[i].rx_bytes; } - return (&sp->stats); + return (&dev->stats); } /** @@ -7419,7 +7436,7 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp) if (err_mask != 0x5) { DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n", dev->name, err_mask); - sp->stats.rx_crc_errors++; + dev->stats.rx_crc_errors++; sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize; dev_kfree_skb(skb); -- GitLab From 383795c206946777d87ed5f6d61d6659110f9344 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Tue, 29 Jul 2008 17:07:26 -0400 Subject: [PATCH 0287/1024] SELinux: /proc/mounts should show what it can Given a hosed SELinux config in which a system never loads policy or disables SELinux we currently just return -EINVAL for anyone trying to read /proc/mounts. This is a configuration problem but we can certainly be more graceful. This patch just ignores -EINVAL when displaying LSM options and causes /proc/mounts display everything else it can. If policy isn't loaded the obviously there are no options, so we aren't really loosing any information here. This is safe as the only other return of EINVAL comes from security_sid_to_context_core() in the case of an invalid sid. Even if a FS was mounted with a now invalidated context that sid should have been remapped to unlabeled and so we won't hit the EINVAL and will work like we should. (yes, I tested to make sure it worked like I thought) Signed-off-by: Eric Paris Tested-by: Marc Dionne Signed-off-by: James Morris --- security/selinux/hooks.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 40d06c533f8..3ae9bec5a50 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -998,8 +998,12 @@ static int selinux_sb_show_options(struct seq_file *m, struct super_block *sb) int rc; rc = selinux_get_mnt_opts(sb, &opts); - if (rc) + if (rc) { + /* before policy load we may get EINVAL, don't show anything */ + if (rc == -EINVAL) + rc = 0; return rc; + } selinux_write_opts(m, &opts); -- GitLab From cf0d19fb3032ebf2cf8e5217da00f51dc025aa8e Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Tue, 29 Jul 2008 15:29:24 -0500 Subject: [PATCH 0288/1024] powerpc/fsl: proliferate simple-bus compatibility to soc nodes add simple-bus compatible property to soc nodes for 83xx/85xx platforms that were missing them. Add same to platform probe code. This fixes SoC device drivers (such as talitos) to succeed in matching devices present in the soc node. also update mpc836x_rdk dts to new SEC bindings (overlooked in commit 3fd4473: powerpc/fsl: update crypto node definition and device tree instances). Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc832x_mds.dts | 1 + arch/powerpc/boot/dts/mpc832x_rdb.dts | 1 + arch/powerpc/boot/dts/mpc8349emitx.dts | 1 + arch/powerpc/boot/dts/mpc8349emitxgp.dts | 1 + arch/powerpc/boot/dts/mpc834x_mds.dts | 1 + arch/powerpc/boot/dts/mpc836x_mds.dts | 1 + arch/powerpc/boot/dts/mpc836x_rdk.dts | 16 ++++++---------- arch/powerpc/boot/dts/mpc8377_mds.dts | 1 + arch/powerpc/boot/dts/mpc8378_mds.dts | 1 + arch/powerpc/boot/dts/mpc8379_mds.dts | 1 + arch/powerpc/boot/dts/mpc8536ds.dts | 1 + arch/powerpc/boot/dts/mpc8540ads.dts | 1 + arch/powerpc/boot/dts/mpc8541cds.dts | 1 + arch/powerpc/boot/dts/mpc8544ds.dts | 1 + arch/powerpc/boot/dts/mpc8548cds.dts | 1 + arch/powerpc/boot/dts/mpc8555cds.dts | 1 + arch/powerpc/boot/dts/mpc8560ads.dts | 1 + arch/powerpc/boot/dts/mpc8568mds.dts | 1 + arch/powerpc/boot/dts/mpc8572ds.dts | 1 + arch/powerpc/platforms/83xx/mpc832x_mds.c | 1 + arch/powerpc/platforms/83xx/mpc832x_rdb.c | 1 + arch/powerpc/platforms/83xx/mpc834x_itx.c | 1 + arch/powerpc/platforms/83xx/mpc834x_mds.c | 1 + arch/powerpc/platforms/83xx/mpc836x_mds.c | 1 + arch/powerpc/platforms/83xx/sbc834x.c | 1 + arch/powerpc/platforms/85xx/ksi8560.c | 1 + arch/powerpc/platforms/85xx/mpc8536_ds.c | 1 + arch/powerpc/platforms/85xx/mpc85xx_ads.c | 1 + arch/powerpc/platforms/85xx/mpc85xx_ds.c | 1 + arch/powerpc/platforms/85xx/mpc85xx_mds.c | 1 + arch/powerpc/platforms/85xx/sbc8560.c | 1 + 31 files changed, 36 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 7345743d3d9..fbc930410ff 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -68,6 +68,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <132000000>; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index e74c045a0f8..b157d1885a2 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -51,6 +51,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 8dfab566258..700e076ef3f 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -52,6 +52,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; // from bootloader diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index 49ca3497eef..cdd3063258e 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -50,6 +50,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; // from bootloader diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index ba586cb7afb..783241c0024 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -57,6 +57,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 3701dae1ee0..a3b76a70995 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -61,6 +61,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <264000000>; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index 8acd1d6577f..89c9202f8bd 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -149,18 +149,14 @@ }; crypto@30000 { - compatible = "fsl,sec2-crypto"; + compatible = "fsl,sec2.0"; reg = <0x30000 0x10000>; - interrupts = <11 8>; + interrupts = <11 0x8>; interrupt-parent = <&ipic>; - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x7e>; - /* - * desc mask is for rev1.x, we need runtime fixup - * for >=2.x - */ - descriptor-types-mask = <0x1010ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; }; ipic: interrupt-controller@700 { diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 0a700cb5f61..432782b6d20 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index 29c8c76a58f..ed32c8ddafe 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index d641a8985ea..f4db9ed4a30 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index 02cfa24a169..1505d6855ef 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -49,6 +49,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xffe00000 0x100000>; reg = <0xffe00000 0x1000>; bus-frequency = <0>; // Filled out by uboot. diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index f2273a872b1..9568bfaff8f 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x100000>; // CCSRBAR 1M bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index c4469f19ff8..6480f4fd96e 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 7d3829d3495..f1fb20737e3 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -54,6 +54,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR 1M diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index d84466bb7ec..431b496270d 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -58,6 +58,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index e03a7800628..d833a5c4f47 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; // CCSRBAR 1M bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index ba8159de040..4d1f2f28409 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -53,6 +53,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x200>; bus-frequency = <330000000>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 9c30a34821d..a15f10343f5 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -60,6 +60,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xe0000000 0x100000>; reg = <0xe0000000 0x1000>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index 08c61e3daec..e124dd18fb5 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -68,6 +68,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; + compatible = "simple-bus"; ranges = <0x0 0xffe00000 0x100000>; reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed bus-frequency = <0>; // Filled out by uboot. diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index dd4be4aee31..ec43477caa6 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -105,6 +105,7 @@ static void __init mpc832x_sys_setup_arch(void) static struct of_device_id mpc832x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c index f049d692d4c..0300268ce5b 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c @@ -115,6 +115,7 @@ static void __init mpc832x_rdb_setup_arch(void) static struct of_device_id mpc832x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 7301d77a08e..76092d37c7d 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -41,6 +41,7 @@ static struct of_device_id __initdata mpc834x_itx_ids[] = { { .compatible = "fsl,pq2pro-localbus", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index 30d509aa9f0..fc3f2ed1f3e 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -111,6 +111,7 @@ static void __init mpc834x_mds_init_IRQ(void) static struct of_device_id mpc834x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c index 75b80e83657..9d46e5bdd10 100644 --- a/arch/powerpc/platforms/83xx/mpc836x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c @@ -136,6 +136,7 @@ static void __init mpc836x_mds_setup_arch(void) static struct of_device_id mpc836x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c index fc21f5c15ba..156c4e21800 100644 --- a/arch/powerpc/platforms/83xx/sbc834x.c +++ b/arch/powerpc/platforms/83xx/sbc834x.c @@ -83,6 +83,7 @@ static void __init sbc834x_init_IRQ(void) static struct __initdata of_device_id sbc834x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c index 2145adeb220..8a3b117b6ce 100644 --- a/arch/powerpc/platforms/85xx/ksi8560.c +++ b/arch/powerpc/platforms/85xx/ksi8560.c @@ -222,6 +222,7 @@ static void ksi8560_show_cpuinfo(struct seq_file *m) static struct of_device_id __initdata of_bus_ids[] = { { .type = "soc", }, + { .type = "simple-bus", }, { .name = "cpm", }, { .name = "localbus", }, {}, diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c index 6b846aa1ced..1bf5aefdfeb 100644 --- a/arch/powerpc/platforms/85xx/mpc8536_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c @@ -91,6 +91,7 @@ static void __init mpc8536_ds_setup_arch(void) static struct of_device_id __initdata mpc8536_ds_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index ba498d6f2d0..d17807a6b89 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -230,6 +230,7 @@ static struct of_device_id __initdata of_bus_ids[] = { { .type = "soc", }, { .name = "cpm", }, { .name = "localbus", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index 00c53580664..483b65cbaba 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -186,6 +186,7 @@ static int __init mpc8544_ds_probe(void) static struct of_device_id __initdata mpc85xxds_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 43a459f63e3..2494c515591 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -260,6 +260,7 @@ machine_arch_initcall(mpc85xx_mds, board_fixups); static struct of_device_id mpc85xx_ids[] = { { .type = "soc", }, { .compatible = "soc", }, + { .compatible = "simple-bus", }, { .type = "qe", }, { .compatible = "fsl,qe", }, {}, diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c index 2c580cd24e4..6509ade7166 100644 --- a/arch/powerpc/platforms/85xx/sbc8560.c +++ b/arch/powerpc/platforms/85xx/sbc8560.c @@ -217,6 +217,7 @@ static struct of_device_id __initdata of_bus_ids[] = { { .type = "soc", }, { .name = "cpm", }, { .name = "localbus", }, + { .compatible = "simple-bus", }, {}, }; -- GitLab From 11c675cef2fbe471dc6103a89b156e65c3630f3a Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 23 May 2008 16:22:42 +1000 Subject: [PATCH 0289/1024] ipmi/powerpc: Use linux/of_{device,platform}.h instead of asm Drivers should not include the asm variants anymore Signed-off-by: Stephen Rothwell Signed-off-by: Benjamin Herrenschmidt --- drivers/char/ipmi/ipmi_si_intf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 192688344ed..f52931e1c16 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -66,8 +66,8 @@ #include #ifdef CONFIG_PPC_OF -#include -#include +#include +#include #endif #define PFX "ipmi_si: " -- GitLab From 9ee07f91a1fab61ff0d8d25be43351a049c0a821 Mon Sep 17 00:00:00 2001 From: Nathan Fontenot Date: Sat, 26 Jul 2008 04:27:06 +1000 Subject: [PATCH 0290/1024] powerpc: Allow non-hcall return values for lparcfg writes The code to handle writes to /proc/ppc64/lparcfg incorrectly assumes that the return code from the helper routines to update processor or memory entitlement return a hcall return value. It then assumes any non-hcall return value is bad and sets the return code for the write to be -EIO. The update_[mp]pp routines can return values other than a hcall return value. This patch removes the automatic setting of any return code that is not an hcall return value from these routines to -EIO. Signed-off-by: Nathan Fontenot Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/lparcfg.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 9f856a0c3e3..1a09719c762 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -636,10 +636,6 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, retval = -EIO; } else if (retval == H_PARAMETER) { retval = -EINVAL; - } else { - printk(KERN_WARNING "%s: received unknown hv return code %ld", - __func__, retval); - retval = -EIO; } return retval; -- GitLab From 9842727da7d95d8249087148048cc571f967c023 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 28 Jul 2008 11:29:56 +1000 Subject: [PATCH 0291/1024] ide/powermac: Fix use of uninitialized pointer on media-bay The current ide-pmac calls media_bay_set_ide_infos() with an uninitialized "hwif" argument. The proper fix is to split the allocation of the hwif from its registration in order to properly setup the mediabay informations before registration. Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Benjamin Herrenschmidt --- drivers/ide/ppc/pmac.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index c521bf6e1bf..fa2be26272d 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1086,6 +1086,11 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) /* Make sure we have sane timings */ sanitize_timings(pmif); + host = ide_host_alloc(&d, hws); + if (host == NULL) + return -ENOMEM; + hwif = host->ports[0]; + #ifndef CONFIG_PPC64 /* XXX FIXME: Media bay stuff need re-organizing */ if (np->parent && np->parent->name @@ -1119,11 +1124,11 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, pmif->mediabay ? " (mediabay)" : "", hw->irq); - rc = ide_host_add(&d, hws, &host); - if (rc) + rc = ide_host_register(host, &d, hws); + if (rc) { + ide_host_free(host); return rc; - - hwif = host->ports[0]; + } return 0; } -- GitLab From 33b3f03dccc26c377e9689790ecc41079a0c9ca7 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 29 Jul 2008 01:13:14 +1000 Subject: [PATCH 0292/1024] powerpc: Correctly hookup PTRACE_GET/SETVSRREGS for 32 bit processes Fix bug where PTRACE_GET/SETVSRREGS are not connected for 32 bit processes. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ptrace32.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index 67bf1a1e7e1..197d49c790a 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -294,6 +294,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, case PTRACE_SETFPREGS: case PTRACE_GETVRREGS: case PTRACE_SETVRREGS: + case PTRACE_GETVSRREGS: + case PTRACE_SETVSRREGS: case PTRACE_GETREGS64: case PTRACE_SETREGS64: case PPC_PTRACE_GETFPREGS: -- GitLab From 1ac42ef844d7c0996f15c6f94f463ac94cb80818 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 29 Jul 2008 01:13:14 +1000 Subject: [PATCH 0293/1024] powerpc: Fix ptrace buffer size for VSX Fix cut-and-paste error in the size setting for ptrace buffers for VSX. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ptrace.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 6b66cd85b43..97d5dede817 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -975,15 +975,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case PTRACE_GETVSRREGS: return copy_regset_to_user(child, &user_ppc_native_view, REGSET_VSX, - 0, (32 * sizeof(vector128) + - sizeof(u32)), + 0, 32 * sizeof(double), (void __user *) data); case PTRACE_SETVSRREGS: return copy_regset_from_user(child, &user_ppc_native_view, REGSET_VSX, - 0, (32 * sizeof(vector128) + - sizeof(u32)), + 0, 32 * sizeof(double), (const void __user *) data); #endif #ifdef CONFIG_SPE -- GitLab From 7d2a175b9bf6e9422bebe95130a3c79a25ff4602 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 29 Jul 2008 01:13:14 +1000 Subject: [PATCH 0294/1024] powerpc: Don't use the wrong thread_struct for ptrace get/set VSX regs In PTRACE_GET/SETVSRREGS, we should be using the thread we are ptracing rather than current. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ptrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 97d5dede817..3635be61f89 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -375,7 +375,7 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset, flush_vsx_to_thread(target); for (i = 0; i < 32 ; i++) - buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET]; + buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET]; ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, 32 * sizeof(double)); @@ -394,7 +394,7 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset, ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, 32 * sizeof(double)); for (i = 0; i < 32 ; i++) - current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i]; + target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i]; return ret; -- GitLab From ce0ad7f0952581ba75ab6aee55bb1ed9bb22cf4f Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 30 Jul 2008 15:23:13 +1000 Subject: [PATCH 0295/1024] powerpc/mm: Lockless get_user_pages_fast() for 64-bit (v3) Implement lockless get_user_pages_fast for 64-bit powerpc. Page table existence is guaranteed with RCU, and speculative page references are used to take a reference to the pages without having a prior existence guarantee on them. Signed-off-by: Nick Piggin Signed-off-by: Dave Kleikamp Signed-off-by: Andrew Morton Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 3 + arch/powerpc/mm/Makefile | 3 +- arch/powerpc/mm/gup.c | 280 ++++++++++++++++++++++++++++ include/asm-powerpc/pgtable-ppc64.h | 2 + include/linux/pagemap.h | 23 +++ 5 files changed, 310 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/mm/gup.c diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 587da5e0990..63c9cafda9c 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -42,6 +42,9 @@ config GENERIC_HARDIRQS bool default y +config HAVE_GET_USER_PAGES_FAST + def_bool PPC64 + config HAVE_SETUP_PER_CPU_AREA def_bool PPC64 diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 1c00e0196f6..e7392b45a5e 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -12,7 +12,8 @@ obj-y := fault.o mem.o \ mmu_context_$(CONFIG_WORD_SIZE).o hash-$(CONFIG_PPC_NATIVE) := hash_native_64.o obj-$(CONFIG_PPC64) += hash_utils_64.o \ - slb_low.o slb.o stab.o mmap.o $(hash-y) + slb_low.o slb.o stab.o \ + gup.o mmap.o $(hash-y) obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \ tlb_$(CONFIG_WORD_SIZE).o diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c new file mode 100644 index 00000000000..9fdf4d6335e --- /dev/null +++ b/arch/powerpc/mm/gup.c @@ -0,0 +1,280 @@ +/* + * Lockless get_user_pages_fast for powerpc + * + * Copyright (C) 2008 Nick Piggin + * Copyright (C) 2008 Novell Inc. + */ +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include + +/* + * The performance critical leaf functions are made noinline otherwise gcc + * inlines everything into a single function which results in too much + * register pressure. + */ +static noinline int gup_pte_range(pmd_t pmd, unsigned long addr, + unsigned long end, int write, struct page **pages, int *nr) +{ + unsigned long mask, result; + pte_t *ptep; + + result = _PAGE_PRESENT|_PAGE_USER; + if (write) + result |= _PAGE_RW; + mask = result | _PAGE_SPECIAL; + + ptep = pte_offset_kernel(&pmd, addr); + do { + pte_t pte = *ptep; + struct page *page; + + if ((pte_val(pte) & mask) != result) + return 0; + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + page = pte_page(pte); + if (!page_cache_get_speculative(page)) + return 0; + if (unlikely(pte != *ptep)) { + put_page(page); + return 0; + } + pages[*nr] = page; + (*nr)++; + + } while (ptep++, addr += PAGE_SIZE, addr != end); + + return 1; +} + +#ifdef CONFIG_HUGETLB_PAGE +static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate, + unsigned long *addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long mask; + unsigned long pte_end; + struct page *head, *page; + pte_t pte; + int refs; + + pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate); + if (pte_end < end) + end = pte_end; + + pte = *ptep; + mask = _PAGE_PRESENT|_PAGE_USER; + if (write) + mask |= _PAGE_RW; + if ((pte_val(pte) & mask) != mask) + return 0; + /* hugepages are never "special" */ + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + + refs = 0; + head = pte_page(pte); + page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT); + do { + VM_BUG_ON(compound_head(page) != head); + pages[*nr] = page; + (*nr)++; + page++; + refs++; + } while (*addr += PAGE_SIZE, *addr != end); + + if (!page_cache_add_speculative(head, refs)) { + *nr -= refs; + return 0; + } + if (unlikely(pte != *ptep)) { + /* Could be optimized better */ + while (*nr) { + put_page(page); + (*nr)--; + } + } + + return 1; +} +#endif /* CONFIG_HUGETLB_PAGE */ + +static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long next; + pmd_t *pmdp; + + pmdp = pmd_offset(&pud, addr); + do { + pmd_t pmd = *pmdp; + + next = pmd_addr_end(addr, end); + if (pmd_none(pmd)) + return 0; + if (!gup_pte_range(pmd, addr, next, write, pages, nr)) + return 0; + } while (pmdp++, addr = next, addr != end); + + return 1; +} + +static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long next; + pud_t *pudp; + + pudp = pud_offset(&pgd, addr); + do { + pud_t pud = *pudp; + + next = pud_addr_end(addr, end); + if (pud_none(pud)) + return 0; + if (!gup_pmd_range(pud, addr, next, write, pages, nr)) + return 0; + } while (pudp++, addr = next, addr != end); + + return 1; +} + +int get_user_pages_fast(unsigned long start, int nr_pages, int write, + struct page **pages) +{ + struct mm_struct *mm = current->mm; + unsigned long addr, len, end; + unsigned long next; + pgd_t *pgdp; + int psize, nr = 0; + unsigned int shift; + + pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read"); + + start &= PAGE_MASK; + addr = start; + len = (unsigned long) nr_pages << PAGE_SHIFT; + end = start + len; + + if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ, + start, len))) + goto slow_irqon; + + pr_debug(" aligned: %lx .. %lx\n", start, end); + +#ifdef CONFIG_HUGETLB_PAGE + /* We bail out on slice boundary crossing when hugetlb is + * enabled in order to not have to deal with two different + * page table formats + */ + if (addr < SLICE_LOW_TOP) { + if (end > SLICE_LOW_TOP) + goto slow_irqon; + + if (unlikely(GET_LOW_SLICE_INDEX(addr) != + GET_LOW_SLICE_INDEX(end - 1))) + goto slow_irqon; + } else { + if (unlikely(GET_HIGH_SLICE_INDEX(addr) != + GET_HIGH_SLICE_INDEX(end - 1))) + goto slow_irqon; + } +#endif /* CONFIG_HUGETLB_PAGE */ + + /* + * XXX: batch / limit 'nr', to avoid large irq off latency + * needs some instrumenting to determine the common sizes used by + * important workloads (eg. DB2), and whether limiting the batch size + * will decrease performance. + * + * It seems like we're in the clear for the moment. Direct-IO is + * the main guy that batches up lots of get_user_pages, and even + * they are limited to 64-at-a-time which is not so many. + */ + /* + * This doesn't prevent pagetable teardown, but does prevent + * the pagetables from being freed on powerpc. + * + * So long as we atomically load page table pointers versus teardown, + * we can follow the address down to the the page and take a ref on it. + */ + local_irq_disable(); + + psize = get_slice_psize(mm, addr); + shift = mmu_psize_defs[psize].shift; + +#ifdef CONFIG_HUGETLB_PAGE + if (unlikely(mmu_huge_psizes[psize])) { + pte_t *ptep; + unsigned long a = addr; + unsigned long sz = ((1UL) << shift); + struct hstate *hstate = size_to_hstate(sz); + + BUG_ON(!hstate); + /* + * XXX: could be optimized to avoid hstate + * lookup entirely (just use shift) + */ + + do { + VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift); + ptep = huge_pte_offset(mm, a); + pr_debug(" %016lx: huge ptep %p\n", a, ptep); + if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages, + &nr)) + goto slow; + } while (a != end); + } else +#endif /* CONFIG_HUGETLB_PAGE */ + { + pgdp = pgd_offset(mm, addr); + do { + pgd_t pgd = *pgdp; + + VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift); + pr_debug(" %016lx: normal pgd %p\n", addr, (void *)pgd); + next = pgd_addr_end(addr, end); + if (pgd_none(pgd)) + goto slow; + if (!gup_pud_range(pgd, addr, next, write, pages, &nr)) + goto slow; + } while (pgdp++, addr = next, addr != end); + } + local_irq_enable(); + + VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT); + return nr; + + { + int ret; + +slow: + local_irq_enable(); +slow_irqon: + pr_debug(" slow path ! nr = %d\n", nr); + + /* Try to get the remaining pages with get_user_pages */ + start += nr << PAGE_SHIFT; + pages += nr; + + down_read(&mm->mmap_sem); + ret = get_user_pages(current, mm, start, + (end - start) >> PAGE_SHIFT, write, 0, pages, NULL); + up_read(&mm->mmap_sem); + + /* Have to be a bit careful with return values */ + if (nr > 0) { + if (ret < 0) + ret = nr; + else + ret += nr; + } + + return ret; + } +} diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h index 5fc78c0be30..74c6f380b80 100644 --- a/include/asm-powerpc/pgtable-ppc64.h +++ b/include/asm-powerpc/pgtable-ppc64.h @@ -461,6 +461,8 @@ void pgtable_cache_init(void); return pt; } +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address); + #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */ diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index a39b38ccdc9..69ed3cb1197 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -143,6 +143,29 @@ static inline int page_cache_get_speculative(struct page *page) return 1; } +/* + * Same as above, but add instead of inc (could just be merged) + */ +static inline int page_cache_add_speculative(struct page *page, int count) +{ + VM_BUG_ON(in_interrupt()); + +#if !defined(CONFIG_SMP) && defined(CONFIG_CLASSIC_RCU) +# ifdef CONFIG_PREEMPT + VM_BUG_ON(!in_atomic()); +# endif + VM_BUG_ON(page_count(page) == 0); + atomic_add(count, &page->_count); + +#else + if (unlikely(!atomic_add_unless(&page->_count, count, 0))) + return 0; +#endif + VM_BUG_ON(PageCompound(page) && page != compound_head(page)); + + return 1; +} + static inline int page_freeze_refs(struct page *page, int count) { return likely(atomic_cmpxchg(&page->_count, count, 0) == count); -- GitLab From 71fc324b5beded4d55dc67fd39aab8b78c6898cb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 29 Jul 2008 23:47:17 -0700 Subject: [PATCH 0296/1024] sparc64: Kill isa_bus_type. I forgot to delete this when I removed the ISA bus layer from the sparc ports. Signed-off-by: David S. Miller --- arch/sparc/include/asm/of_platform_64.h | 1 - arch/sparc64/kernel/of_device.c | 5 ----- 2 files changed, 6 deletions(-) diff --git a/arch/sparc/include/asm/of_platform_64.h b/arch/sparc/include/asm/of_platform_64.h index 4f66a5f6342..ccaa33c1075 100644 --- a/arch/sparc/include/asm/of_platform_64.h +++ b/arch/sparc/include/asm/of_platform_64.h @@ -16,7 +16,6 @@ /* This is just here during the transition */ #include -extern struct bus_type isa_bus_type; extern struct bus_type ebus_bus_type; extern struct bus_type sbus_bus_type; diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c index 4fd48ab7dda..f8b50cbf4bf 100644 --- a/arch/sparc64/kernel/of_device.c +++ b/arch/sparc64/kernel/of_device.c @@ -56,9 +56,6 @@ struct of_device *of_find_device_by_node(struct device_node *dp) EXPORT_SYMBOL(of_find_device_by_node); #ifdef CONFIG_PCI -struct bus_type isa_bus_type; -EXPORT_SYMBOL(isa_bus_type); - struct bus_type ebus_bus_type; EXPORT_SYMBOL(ebus_bus_type); #endif @@ -841,8 +838,6 @@ static int __init of_bus_driver_init(void) err = of_bus_type_init(&of_platform_bus_type, "of"); #ifdef CONFIG_PCI - if (!err) - err = of_bus_type_init(&isa_bus_type, "isa"); if (!err) err = of_bus_type_init(&ebus_bus_type, "ebus"); #endif -- GitLab From 19fd3cabbabe5d37b83f833a1593592ed9878236 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 29 Jul 2008 23:54:33 -0700 Subject: [PATCH 0297/1024] sparc: merge of_platform_{32,64}.h Signed-off-by: Stephen Rothwell Signed-off-by: David S. Miller --- arch/sparc/include/asm/of_platform.h | 26 ++++++++++++++++++++----- arch/sparc/include/asm/of_platform_32.h | 24 ----------------------- arch/sparc/include/asm/of_platform_64.h | 24 ----------------------- 3 files changed, 21 insertions(+), 53 deletions(-) delete mode 100644 arch/sparc/include/asm/of_platform_32.h delete mode 100644 arch/sparc/include/asm/of_platform_64.h diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h index aa699775ffb..93a262c4402 100644 --- a/arch/sparc/include/asm/of_platform.h +++ b/arch/sparc/include/asm/of_platform.h @@ -1,8 +1,24 @@ #ifndef ___ASM_SPARC_OF_PLATFORM_H #define ___ASM_SPARC_OF_PLATFORM_H -#if defined(__sparc__) && defined(__arch64__) -#include -#else -#include -#endif +/* + * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. + * + * Modified for Sparc by merging parts of asm/of_device.h + * by Stephen Rothwell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +/* This is just here during the transition */ +#include + +extern struct bus_type ebus_bus_type; +extern struct bus_type sbus_bus_type; + +#define of_bus_type of_platform_bus_type /* for compatibility */ + #endif diff --git a/arch/sparc/include/asm/of_platform_32.h b/arch/sparc/include/asm/of_platform_32.h deleted file mode 100644 index 723f7c9b741..00000000000 --- a/arch/sparc/include/asm/of_platform_32.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _ASM_SPARC_OF_PLATFORM_H -#define _ASM_SPARC_OF_PLATFORM_H -/* - * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. - * - * Modified for Sparc by merging parts of asm/of_device.h - * by Stephen Rothwell - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -/* This is just here during the transition */ -#include - -extern struct bus_type ebus_bus_type; -extern struct bus_type sbus_bus_type; - -#define of_bus_type of_platform_bus_type /* for compatibility */ - -#endif /* _ASM_SPARC_OF_PLATFORM_H */ diff --git a/arch/sparc/include/asm/of_platform_64.h b/arch/sparc/include/asm/of_platform_64.h deleted file mode 100644 index ccaa33c1075..00000000000 --- a/arch/sparc/include/asm/of_platform_64.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _ASM_SPARC64_OF_PLATFORM_H -#define _ASM_SPARC64_OF_PLATFORM_H -/* - * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. - * - * Modified for Sparc by merging parts of asm/of_device.h - * by Stephen Rothwell - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -/* This is just here during the transition */ -#include - -extern struct bus_type ebus_bus_type; -extern struct bus_type sbus_bus_type; - -#define of_bus_type of_platform_bus_type /* for compatibility */ - -#endif /* _ASM_SPARC64_OF_PLATFORM_H */ -- GitLab From 4a36702e016947a0ce6c0c024673bb5b16d3f618 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Tue, 29 Jul 2008 23:57:58 -0700 Subject: [PATCH 0298/1024] IPv6: datagram_send_ctl() should exit immediately when an error occured When an error occured, datagram_send_ctl() should exit immediately rather than continue to run the for loop. Otherwise, the variable err might be changed and the error might be hidden. Fix this bug by using "goto" instead of "break". Signed-off-by: Miao Xie Signed-off-by: David S. Miller --- net/ipv6/datagram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index f7b535dec86..410046a8cc9 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -732,7 +732,7 @@ int datagram_send_ctl(struct net *net, LIMIT_NETDEBUG(KERN_DEBUG "invalid cmsg type: %d\n", cmsg->cmsg_type); err = -EINVAL; - break; + goto exit_f; } } -- GitLab From 38c080ffa9c1b840390832b42ce8621464ab9f97 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Tue, 29 Jul 2008 23:59:20 -0700 Subject: [PATCH 0299/1024] niu: Fix error checking in niu_ethflow_to_class. The callers of niu_ethflow_to_class expect zero as error, but it returns -1 instead. Signed-off-by: Andreas Schwab Signed-off-by: David S. Miller --- drivers/net/niu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index 8ee7d7bb951..e4765b713ab 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -6417,7 +6417,7 @@ static int niu_ethflow_to_class(int flow_type, u64 *class) *class = CLASS_CODE_SCTP_IPV6; break; default: - return -1; + return 0; } return 1; -- GitLab From 16d78bc255a55d16c0888dde336978d633e80b01 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 14 Jul 2008 09:07:32 +0200 Subject: [PATCH 0300/1024] dm9601: don't do usb transfers of data on stack dm_{read,write}() were doing USB transfers of data on stack, which isn't allowed. Fix it by kmalloc'ing a temporary buffer. Clean up the error handling for short transfers while we're at it. Signed-off-by: Peter Korsgaard Acked-by: David Brownell Signed-off-by: Jeff Garzik --- drivers/net/usb/dm9601.c | 52 ++++++++++++++++++++++++++++++++-------- 1 file changed, 42 insertions(+), 10 deletions(-) diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index f7319d32691..78df2be8a72 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -55,12 +55,28 @@ static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data) { + void *buf; + int err = -ENOMEM; + devdbg(dev, "dm_read() reg=0x%02x length=%d", reg, length); - return usb_control_msg(dev->udev, - usb_rcvctrlpipe(dev->udev, 0), - DM_READ_REGS, - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0, reg, data, length, USB_CTRL_SET_TIMEOUT); + + buf = kmalloc(length, GFP_KERNEL); + if (!buf) + goto out; + + err = usb_control_msg(dev->udev, + usb_rcvctrlpipe(dev->udev, 0), + DM_READ_REGS, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, reg, buf, length, USB_CTRL_SET_TIMEOUT); + if (err == length) + memcpy(data, buf, length); + else if (err >= 0) + err = -EINVAL; + kfree(buf); + + out: + return err; } static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value) @@ -70,12 +86,28 @@ static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value) static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data) { + void *buf = NULL; + int err = -ENOMEM; + devdbg(dev, "dm_write() reg=0x%02x, length=%d", reg, length); - return usb_control_msg(dev->udev, - usb_sndctrlpipe(dev->udev, 0), - DM_WRITE_REGS, - USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE, - 0, reg, data, length, USB_CTRL_SET_TIMEOUT); + + if (data) { + buf = kmalloc(length, GFP_KERNEL); + if (!buf) + goto out; + memcpy(buf, data, length); + } + + err = usb_control_msg(dev->udev, + usb_sndctrlpipe(dev->udev, 0), + DM_WRITE_REGS, + USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE, + 0, reg, buf, length, USB_CTRL_SET_TIMEOUT); + kfree(buf); + if (err >= 0 && err < length) + err = -EINVAL; + out: + return err; } static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value) -- GitLab From 4e891910f5fc7b94c720f587686636a88447c5e4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 8 Jul 2008 19:35:13 +0100 Subject: [PATCH 0301/1024] [netdrvr] wd: fix build breakage with new NS8390p API From: Alan Cox Signed-off-by: Jeff Garzik --- drivers/net/wd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wd.c b/drivers/net/wd.c index fa14255282a..6f9aa164374 100644 --- a/drivers/net/wd.c +++ b/drivers/net/wd.c @@ -337,7 +337,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr) #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = ei_poll; #endif - NS8390_init(dev, 0); + NS8390p_init(dev, 0); #if 1 /* Enable interrupt generation on softconfig cards -- M.U */ -- GitLab From e2ce4eaa76214f65a3f328ec5b45c30248115768 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Wed, 30 Apr 2008 15:10:07 +0100 Subject: [PATCH 0302/1024] regulator: consumer device interface Add support to allow consumer device drivers to control their regulator power supply. This uses a similar API to the kernel clock interface in that consumer drivers can get and put a regulator (like they can with clocks atm) and get/set voltage, current limit, mode, enable and disable. This should allow consumers complete control over their supply voltage and current limit. This also compiles out if not in use so drivers can be reused in systems with no regulator based power control. Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- include/linux/regulator/consumer.h | 284 +++++++++++++++++++++++++++++ 1 file changed, 284 insertions(+) create mode 100644 include/linux/regulator/consumer.h diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h new file mode 100644 index 00000000000..afdc4558bb9 --- /dev/null +++ b/include/linux/regulator/consumer.h @@ -0,0 +1,284 @@ +/* + * consumer.h -- SoC Regulator consumer support. + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Regulator Consumer Interface. + * + * A Power Management Regulator framework for SoC based devices. + * Features:- + * o Voltage and current level control. + * o Operating mode control. + * o Regulator status. + * o sysfs entries for showing client devices and status + * + * EXPERIMENTAL FEATURES: + * Dynamic Regulator operating Mode Switching (DRMS) - allows regulators + * to use most efficient operating mode depending upon voltage and load and + * is transparent to client drivers. + * + * e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during + * IO and 1mA at idle. Device z draws 100mA when under load and 5mA when + * idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA + * but this drops rapidly to 60% when below 100mA. Regulator r has > 90% + * efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate + * in normal mode for loads > 10mA and in IDLE mode for load <= 10mA. + * + */ + +#ifndef __LINUX_REGULATOR_CONSUMER_H_ +#define __LINUX_REGULATOR_CONSUMER_H_ + +/* + * Regulator operating modes. + * + * Regulators can run in a variety of different operating modes depending on + * output load. This allows further system power savings by selecting the + * best (and most efficient) regulator mode for a desired load. + * + * Most drivers will only care about NORMAL. The modes below are generic and + * will probably not match the naming convention of your regulator data sheet + * but should match the use cases in the datasheet. + * + * In order of power efficiency (least efficient at top). + * + * Mode Description + * FAST Regulator can handle fast changes in it's load. + * e.g. useful in CPU voltage & frequency scaling where + * load can quickly increase with CPU frequency increases. + * + * NORMAL Normal regulator power supply mode. Most drivers will + * use this mode. + * + * IDLE Regulator runs in a more efficient mode for light + * loads. Can be used for devices that have a low power + * requirement during periods of inactivity. This mode + * may be more noisy than NORMAL and may not be able + * to handle fast load switching. + * + * STANDBY Regulator runs in the most efficient mode for very + * light loads. Can be used by devices when they are + * in a sleep/standby state. This mode is likely to be + * the most noisy and may not be able to handle fast load + * switching. + * + * NOTE: Most regulators will only support a subset of these modes. Some + * will only just support NORMAL. + * + * These modes can be OR'ed together to make up a mask of valid register modes. + */ + +#define REGULATOR_MODE_FAST 0x1 +#define REGULATOR_MODE_NORMAL 0x2 +#define REGULATOR_MODE_IDLE 0x4 +#define REGULATOR_MODE_STANDBY 0x8 + +/* + * Regulator notifier events. + * + * UNDER_VOLTAGE Regulator output is under voltage. + * OVER_CURRENT Regulator output current is too high. + * REGULATION_OUT Regulator output is out of regulation. + * FAIL Regulator output has failed. + * OVER_TEMP Regulator over temp. + * FORCE_DISABLE Regulator shut down by software. + * + * NOTE: These events can be OR'ed together when passed into handler. + */ + +#define REGULATOR_EVENT_UNDER_VOLTAGE 0x01 +#define REGULATOR_EVENT_OVER_CURRENT 0x02 +#define REGULATOR_EVENT_REGULATION_OUT 0x04 +#define REGULATOR_EVENT_FAIL 0x08 +#define REGULATOR_EVENT_OVER_TEMP 0x10 +#define REGULATOR_EVENT_FORCE_DISABLE 0x20 + +struct regulator; + +/** + * struct regulator_bulk_data - Data used for bulk regulator operations. + * + * @supply The name of the supply. Initialised by the user before + * using the bulk regulator APIs. + * @consumer The regulator consumer for the supply. This will be managed + * by the bulk API. + * + * The regulator APIs provide a series of regulator_bulk_() API calls as + * a convenience to consumers which require multiple supplies. This + * structure is used to manage data for these calls. + */ +struct regulator_bulk_data { + const char *supply; + struct regulator *consumer; +}; + +#if defined(CONFIG_REGULATOR) + +/* regulator get and put */ +struct regulator *__must_check regulator_get(struct device *dev, + const char *id); +void regulator_put(struct regulator *regulator); + +/* regulator output control and status */ +int regulator_enable(struct regulator *regulator); +int regulator_disable(struct regulator *regulator); +int regulator_force_disable(struct regulator *regulator); +int regulator_is_enabled(struct regulator *regulator); + +int regulator_bulk_get(struct device *dev, int num_consumers, + struct regulator_bulk_data *consumers); +int regulator_bulk_enable(int num_consumers, + struct regulator_bulk_data *consumers); +int regulator_bulk_disable(int num_consumers, + struct regulator_bulk_data *consumers); +void regulator_bulk_free(int num_consumers, + struct regulator_bulk_data *consumers); + +int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV); +int regulator_get_voltage(struct regulator *regulator); +int regulator_set_current_limit(struct regulator *regulator, + int min_uA, int max_uA); +int regulator_get_current_limit(struct regulator *regulator); + +int regulator_set_mode(struct regulator *regulator, unsigned int mode); +unsigned int regulator_get_mode(struct regulator *regulator); +int regulator_set_optimum_mode(struct regulator *regulator, int load_uA); + +/* regulator notifier block */ +int regulator_register_notifier(struct regulator *regulator, + struct notifier_block *nb); +int regulator_unregister_notifier(struct regulator *regulator, + struct notifier_block *nb); + +/* driver data - core doesn't touch */ +void *regulator_get_drvdata(struct regulator *regulator); +void regulator_set_drvdata(struct regulator *regulator, void *data); + +#else + +/* + * Make sure client drivers will still build on systems with no software + * controllable voltage or current regulators. + */ +static inline struct regulator *__must_check regulator_get(struct device *dev, + const char *id) +{ + /* Nothing except the stubbed out regulator API should be + * looking at the value except to check if it is an error + * value so the actual return value doesn't matter. + */ + return (struct regulator *)id; +} +static inline void regulator_put(struct regulator *regulator) +{ +} + +static inline int regulator_enable(struct regulator *regulator) +{ + return 0; +} + +static inline int regulator_disable(struct regulator *regulator) +{ + return 0; +} + +static inline int regulator_is_enabled(struct regulator *regulator) +{ + return 1; +} + +static inline int regulator_bulk_get(struct device *dev, + int num_consumers, + struct regulator_bulk_data *consumers) +{ + return 0; +} + +static inline int regulator_bulk_enable(int num_consumers, + struct regulator_bulk_data *consumers) +{ + return 0; +} + +static inline int regulator_bulk_disable(int num_consumers, + struct regulator_bulk_data *consumers) +{ + return 0; +} + +static inline void regulator_bulk_free(int num_consumers, + struct regulator_bulk_data *consumers) +{ +} + +static inline int regulator_set_voltage(struct regulator *regulator, + int min_uV, int max_uV) +{ + return 0; +} + +static inline int regulator_get_voltage(struct regulator *regulator) +{ + return 0; +} + +static inline int regulator_set_current_limit(struct regulator *regulator, + int min_uA, int max_uA) +{ + return 0; +} + +static inline int regulator_get_current_limit(struct regulator *regulator) +{ + return 0; +} + +static inline int regulator_set_mode(struct regulator *regulator, + unsigned int mode) +{ + return 0; +} + +static inline unsigned int regulator_get_mode(struct regulator *regulator) +{ + return REGULATOR_MODE_NORMAL; +} + +static inline int regulator_set_optimum_mode(struct regulator *regulator, + int load_uA) +{ + return REGULATOR_MODE_NORMAL; +} + +static inline int regulator_register_notifier(struct regulator *regulator, + struct notifier_block *nb) +{ + return 0; +} + +static inline int regulator_unregister_notifier(struct regulator *regulator, + struct notifier_block *nb) +{ + return 0; +} + +static inline void *regulator_get_drvdata(struct regulator *regulator) +{ + return NULL; +} + +static inline void regulator_set_drvdata(struct regulator *regulator, + void *data) +{ +} + +#endif + +#endif -- GitLab From 571a354b1542a274d88617e1f6703f3fe7a517f1 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Wed, 30 Apr 2008 15:42:28 +0100 Subject: [PATCH 0303/1024] regulator: regulator driver interface This allows regulator drivers to register their regulators and provide operations to the core. It also has a notifier call chain for propagating regulator events to clients. Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 99 ++++++++++++++++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 include/linux/regulator/driver.h diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h new file mode 100644 index 00000000000..1d712c7172a --- /dev/null +++ b/include/linux/regulator/driver.h @@ -0,0 +1,99 @@ +/* + * driver.h -- SoC Regulator driver support. + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Regulator Driver Interface. + */ + +#ifndef __LINUX_REGULATOR_DRIVER_H_ +#define __LINUX_REGULATOR_DRIVER_H_ + +#include +#include + +struct regulator_constraints; +struct regulator_dev; + +/** + * struct regulator_ops - regulator operations. + * + * This struct describes regulator operations. + */ +struct regulator_ops { + + /* get/set regulator voltage */ + int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV); + int (*get_voltage) (struct regulator_dev *); + + /* get/set regulator current */ + int (*set_current_limit) (struct regulator_dev *, + int min_uA, int max_uA); + int (*get_current_limit) (struct regulator_dev *); + + /* enable/disable regulator */ + int (*enable) (struct regulator_dev *); + int (*disable) (struct regulator_dev *); + int (*is_enabled) (struct regulator_dev *); + + /* get/set regulator operating mode (defined in regulator.h) */ + int (*set_mode) (struct regulator_dev *, unsigned int mode); + unsigned int (*get_mode) (struct regulator_dev *); + + /* get most efficient regulator operating mode for load */ + unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV, + int output_uV, int load_uA); + + /* the operations below are for configuration of regulator state when + * it's parent PMIC enters a global STANBY/HIBERNATE state */ + + /* set regulator suspend voltage */ + int (*set_suspend_voltage) (struct regulator_dev *, int uV); + + /* enable/disable regulator in suspend state */ + int (*set_suspend_enable) (struct regulator_dev *); + int (*set_suspend_disable) (struct regulator_dev *); + + /* set regulator suspend operating mode (defined in regulator.h) */ + int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode); +}; + +/* + * Regulators can either control voltage or current. + */ +enum regulator_type { + REGULATOR_VOLTAGE, + REGULATOR_CURRENT, +}; + +/** + * struct regulator_desc - Regulator descriptor + * + */ +struct regulator_desc { + const char *name; + int id; + struct regulator_ops *ops; + int irq; + enum regulator_type type; + struct module *owner; +}; + + +struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, + void *reg_data); +void regulator_unregister(struct regulator_dev *rdev); + +int regulator_notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data); + +void *rdev_get_drvdata(struct regulator_dev *rdev); +int rdev_get_id(struct regulator_dev *rdev); + +#endif -- GitLab From 4c1184e85cb381121a5273ea20ad31ca3faa0a4f Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Wed, 30 Apr 2008 15:46:09 +0100 Subject: [PATCH 0304/1024] regulator: machine driver interface This interface is for machine specific code and allows the creation of voltage/current domains (with constraints) for each regulator. It can provide regulator constraints that will prevent device damage through overvoltage or over current caused by buggy client drivers. It also allows the creation of a regulator tree whereby some regulators are supplied by others (similar to a clock tree). Signed-off-by: Liam Girdwood Signed-off-by: Philipp Zabel Signed-off-by: Mark Brown --- include/linux/regulator/machine.h | 104 ++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 include/linux/regulator/machine.h diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h new file mode 100644 index 00000000000..11e737dbfcf --- /dev/null +++ b/include/linux/regulator/machine.h @@ -0,0 +1,104 @@ +/* + * machine.h -- SoC Regulator support, machine/board driver API. + * + * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Regulator Machine/Board Interface. + */ + +#ifndef __LINUX_REGULATOR_MACHINE_H_ +#define __LINUX_REGULATOR_MACHINE_H_ + +#include +#include + +struct regulator; + +/* + * Regulator operation constraint flags. These flags are used to enable + * certain regulator operations and can be OR'ed together. + * + * VOLTAGE: Regulator output voltage can be changed by software on this + * board/machine. + * CURRENT: Regulator output current can be changed by software on this + * board/machine. + * MODE: Regulator operating mode can be changed by software on this + * board/machine. + * STATUS: Regulator can be enabled and disabled. + * DRMS: Dynamic Regulator Mode Switching is enabled for this regulator. + */ + +#define REGULATOR_CHANGE_VOLTAGE 0x1 +#define REGULATOR_CHANGE_CURRENT 0x2 +#define REGULATOR_CHANGE_MODE 0x4 +#define REGULATOR_CHANGE_STATUS 0x8 +#define REGULATOR_CHANGE_DRMS 0x10 + +/** + * struct regulator_state - regulator state during low power syatem states + * + * This describes a regulators state during a system wide low power state. + */ +struct regulator_state { + int uV; /* suspend voltage */ + unsigned int mode; /* suspend regulator operating mode */ + int enabled; /* is regulator enabled in this suspend state */ +}; + +/** + * struct regulation_constraints - regulator operating constraints. + * + * This struct describes regulator and board/machine specific constraints. + */ +struct regulation_constraints { + + char *name; + + /* voltage output range (inclusive) - for voltage control */ + int min_uV; + int max_uV; + + /* current output range (inclusive) - for current control */ + int min_uA; + int max_uA; + + /* valid regulator operating modes for this machine */ + unsigned int valid_modes_mask; + + /* valid operations for regulator on this machine */ + unsigned int valid_ops_mask; + + /* regulator input voltage - only if supply is another regulator */ + int input_uV; + + /* regulator suspend states for global PMIC STANDBY/HIBERNATE */ + struct regulator_state state_disk; + struct regulator_state state_mem; + struct regulator_state state_standby; + suspend_state_t initial_state; /* suspend state to set at init */ + + /* constriant flags */ + unsigned always_on:1; /* regulator never off when system is on */ + unsigned boot_on:1; /* bootloader/firmware enabled regulator */ + unsigned apply_uV:1; /* apply uV constraint iff min == max */ +}; + +int regulator_set_supply(const char *regulator, const char *regulator_supply); + +const char *regulator_get_supply(const char *regulator); + +int regulator_set_machine_constraints(const char *regulator, + struct regulation_constraints *constraints); + +int regulator_set_device_supply(const char *regulator, struct device *dev, + const char *supply); + +int regulator_suspend_prepare(suspend_state_t state); + +#endif -- GitLab From 48d335ba3164ce99cb8847513d0e3b6ee604eb20 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 30 Apr 2008 15:50:21 +0100 Subject: [PATCH 0305/1024] regulator: fixed regulator interface This patch adds support for fixed regulators. This class of regulator is not software controllable but can coexist on machines with software controlable regulators. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/fixed.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 include/linux/regulator/fixed.h diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h new file mode 100644 index 00000000000..1387a5d2190 --- /dev/null +++ b/include/linux/regulator/fixed.h @@ -0,0 +1,22 @@ +/* + * fixed.h + * + * Copyright 2008 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + */ + +#ifndef __REGULATOR_FIXED_H +#define __REGULATOR_FIXED_H + +struct fixed_voltage_config { + const char *supply_name; + int microvolts; +}; + +#endif -- GitLab From 414c70cb91c445ec813b61e16fe4882807e40240 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Wed, 30 Apr 2008 15:59:04 +0100 Subject: [PATCH 0306/1024] regulator: regulator framework core This adds the regulator framework core. This framework is designed to provide a generic interface to voltage and current regulators within the Linux kernel. It's intended to provide voltage and current control to client or consumer drivers and also provide status information to user space applications through a sysfs interface. The intention is to allow systems to dynamically control regulator output in order to save power and prolong battery life. This applies to both voltage regulators (where voltage output is controllable) and current sinks (where current output is controllable). This framework safely compiles out if not selected so that client drivers can still be used in systems with no software controllable regulators. Signed-off-by: Liam Girdwood Signed-off-by: Greg Kroah-Hartman Signed-off-by: Mark Brown --- drivers/regulator/core.c | 1903 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 1903 insertions(+) create mode 100644 drivers/regulator/core.c diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c new file mode 100644 index 00000000000..9c798626156 --- /dev/null +++ b/drivers/regulator/core.c @@ -0,0 +1,1903 @@ +/* + * core.c -- Voltage/Current Regulator framework. + * + * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * + * Author: Liam Girdwood + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REGULATOR_VERSION "0.5" + +static DEFINE_MUTEX(regulator_list_mutex); +static LIST_HEAD(regulator_list); +static LIST_HEAD(regulator_map_list); + +/** + * struct regulator_dev + * + * Voltage / Current regulator class device. One for each regulator. + */ +struct regulator_dev { + struct regulator_desc *desc; + int use_count; + + /* lists we belong to */ + struct list_head list; /* list of all regulators */ + struct list_head slist; /* list of supplied regulators */ + + /* lists we own */ + struct list_head consumer_list; /* consumers we supply */ + struct list_head supply_list; /* regulators we supply */ + + struct blocking_notifier_head notifier; + struct mutex mutex; /* consumer lock */ + struct module *owner; + struct device dev; + struct regulation_constraints *constraints; + struct regulator_dev *supply; /* for tree */ + + void *reg_data; /* regulator_dev data */ +}; + +/** + * struct regulator_map + * + * Used to provide symbolic supply names to devices. + */ +struct regulator_map { + struct list_head list; + struct device *dev; + const char *supply; + const char *regulator; +}; + +static inline struct regulator_dev *to_rdev(struct device *d) +{ + return container_of(d, struct regulator_dev, dev); +} + +/* + * struct regulator + * + * One for each consumer device. + */ +struct regulator { + struct device *dev; + struct list_head list; + int uA_load; + int min_uV; + int max_uV; + int enabled; /* client has called enabled */ + char *supply_name; + struct device_attribute dev_attr; + struct regulator_dev *rdev; +}; + +static int _regulator_is_enabled(struct regulator_dev *rdev); +static int _regulator_disable(struct regulator_dev *rdev); +static int _regulator_get_voltage(struct regulator_dev *rdev); +static int _regulator_get_current_limit(struct regulator_dev *rdev); +static unsigned int _regulator_get_mode(struct regulator_dev *rdev); +static void _notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data); + +/* gets the regulator for a given consumer device */ +static struct regulator *get_device_regulator(struct device *dev) +{ + struct regulator *regulator = NULL; + struct regulator_dev *rdev; + + mutex_lock(®ulator_list_mutex); + list_for_each_entry(rdev, ®ulator_list, list) { + mutex_lock(&rdev->mutex); + list_for_each_entry(regulator, &rdev->consumer_list, list) { + if (regulator->dev == dev) { + mutex_unlock(&rdev->mutex); + mutex_unlock(®ulator_list_mutex); + return regulator; + } + } + mutex_unlock(&rdev->mutex); + } + mutex_unlock(®ulator_list_mutex); + return NULL; +} + +/* Platform voltage constraint check */ +static int regulator_check_voltage(struct regulator_dev *rdev, + int *min_uV, int *max_uV) +{ + BUG_ON(*min_uV > *max_uV); + + if (!rdev->constraints) { + printk(KERN_ERR "%s: no constraints for %s\n", __func__, + rdev->desc->name); + return -ENODEV; + } + if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) { + printk(KERN_ERR "%s: operation not allowed for %s\n", + __func__, rdev->desc->name); + return -EPERM; + } + + if (*max_uV > rdev->constraints->max_uV) + *max_uV = rdev->constraints->max_uV; + if (*min_uV < rdev->constraints->min_uV) + *min_uV = rdev->constraints->min_uV; + + if (*min_uV > *max_uV) + return -EINVAL; + + return 0; +} + +/* current constraint check */ +static int regulator_check_current_limit(struct regulator_dev *rdev, + int *min_uA, int *max_uA) +{ + BUG_ON(*min_uA > *max_uA); + + if (!rdev->constraints) { + printk(KERN_ERR "%s: no constraints for %s\n", __func__, + rdev->desc->name); + return -ENODEV; + } + if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) { + printk(KERN_ERR "%s: operation not allowed for %s\n", + __func__, rdev->desc->name); + return -EPERM; + } + + if (*max_uA > rdev->constraints->max_uA) + *max_uA = rdev->constraints->max_uA; + if (*min_uA < rdev->constraints->min_uA) + *min_uA = rdev->constraints->min_uA; + + if (*min_uA > *max_uA) + return -EINVAL; + + return 0; +} + +/* operating mode constraint check */ +static int regulator_check_mode(struct regulator_dev *rdev, int mode) +{ + if (!rdev->constraints) { + printk(KERN_ERR "%s: no constraints for %s\n", __func__, + rdev->desc->name); + return -ENODEV; + } + if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) { + printk(KERN_ERR "%s: operation not allowed for %s\n", + __func__, rdev->desc->name); + return -EPERM; + } + if (!(rdev->constraints->valid_modes_mask & mode)) { + printk(KERN_ERR "%s: invalid mode %x for %s\n", + __func__, mode, rdev->desc->name); + return -EINVAL; + } + return 0; +} + +/* dynamic regulator mode switching constraint check */ +static int regulator_check_drms(struct regulator_dev *rdev) +{ + if (!rdev->constraints) { + printk(KERN_ERR "%s: no constraints for %s\n", __func__, + rdev->desc->name); + return -ENODEV; + } + if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) { + printk(KERN_ERR "%s: operation not allowed for %s\n", + __func__, rdev->desc->name); + return -EPERM; + } + return 0; +} + +static ssize_t device_requested_uA_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator *regulator; + + regulator = get_device_regulator(dev); + if (regulator == NULL) + return 0; + + return sprintf(buf, "%d\n", regulator->uA_load); +} + +static ssize_t regulator_uV_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + ssize_t ret; + + mutex_lock(&rdev->mutex); + ret = sprintf(buf, "%d\n", _regulator_get_voltage(rdev)); + mutex_unlock(&rdev->mutex); + + return ret; +} + +static ssize_t regulator_uA_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev)); +} + +static ssize_t regulator_opmode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + int mode = _regulator_get_mode(rdev); + + switch (mode) { + case REGULATOR_MODE_FAST: + return sprintf(buf, "fast\n"); + case REGULATOR_MODE_NORMAL: + return sprintf(buf, "normal\n"); + case REGULATOR_MODE_IDLE: + return sprintf(buf, "idle\n"); + case REGULATOR_MODE_STANDBY: + return sprintf(buf, "standby\n"); + } + return sprintf(buf, "unknown\n"); +} + +static ssize_t regulator_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + int state = _regulator_is_enabled(rdev); + + if (state > 0) + return sprintf(buf, "enabled\n"); + else if (state == 0) + return sprintf(buf, "disabled\n"); + else + return sprintf(buf, "unknown\n"); +} + +static ssize_t regulator_min_uA_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "constraint not defined\n"); + + return sprintf(buf, "%d\n", rdev->constraints->min_uA); +} + +static ssize_t regulator_max_uA_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "constraint not defined\n"); + + return sprintf(buf, "%d\n", rdev->constraints->max_uA); +} + +static ssize_t regulator_min_uV_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "constraint not defined\n"); + + return sprintf(buf, "%d\n", rdev->constraints->min_uV); +} + +static ssize_t regulator_max_uV_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "constraint not defined\n"); + + return sprintf(buf, "%d\n", rdev->constraints->max_uV); +} + +static ssize_t regulator_total_uA_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + struct regulator *regulator; + int uA = 0; + + mutex_lock(&rdev->mutex); + list_for_each_entry(regulator, &rdev->consumer_list, list) + uA += regulator->uA_load; + mutex_unlock(&rdev->mutex); + return sprintf(buf, "%d\n", uA); +} + +static ssize_t regulator_num_users_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + return sprintf(buf, "%d\n", rdev->use_count); +} + +static ssize_t regulator_type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + switch (rdev->desc->type) { + case REGULATOR_VOLTAGE: + return sprintf(buf, "voltage\n"); + case REGULATOR_CURRENT: + return sprintf(buf, "current\n"); + } + return sprintf(buf, "unknown\n"); +} + +static ssize_t regulator_suspend_mem_uV_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV); +} + +static ssize_t regulator_suspend_disk_uV_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV); +} + +static ssize_t regulator_suspend_standby_uV_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV); +} + +static ssize_t suspend_opmode_show(struct regulator_dev *rdev, + unsigned int mode, char *buf) +{ + switch (mode) { + case REGULATOR_MODE_FAST: + return sprintf(buf, "fast\n"); + case REGULATOR_MODE_NORMAL: + return sprintf(buf, "normal\n"); + case REGULATOR_MODE_IDLE: + return sprintf(buf, "idle\n"); + case REGULATOR_MODE_STANDBY: + return sprintf(buf, "standby\n"); + } + return sprintf(buf, "unknown\n"); +} + +static ssize_t regulator_suspend_mem_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + return suspend_opmode_show(rdev, + rdev->constraints->state_mem.mode, buf); +} + +static ssize_t regulator_suspend_disk_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + return suspend_opmode_show(rdev, + rdev->constraints->state_disk.mode, buf); +} + +static ssize_t regulator_suspend_standby_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + return suspend_opmode_show(rdev, + rdev->constraints->state_standby.mode, buf); +} + +static ssize_t regulator_suspend_mem_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + + if (rdev->constraints->state_mem.enabled) + return sprintf(buf, "enabled\n"); + else + return sprintf(buf, "disabled\n"); +} + +static ssize_t regulator_suspend_disk_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + + if (rdev->constraints->state_disk.enabled) + return sprintf(buf, "enabled\n"); + else + return sprintf(buf, "disabled\n"); +} + +static ssize_t regulator_suspend_standby_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct regulator_dev *rdev = to_rdev(dev); + + if (!rdev->constraints) + return sprintf(buf, "not defined\n"); + + if (rdev->constraints->state_standby.enabled) + return sprintf(buf, "enabled\n"); + else + return sprintf(buf, "disabled\n"); +} +static struct device_attribute regulator_dev_attrs[] = { + __ATTR(microvolts, 0444, regulator_uV_show, NULL), + __ATTR(microamps, 0444, regulator_uA_show, NULL), + __ATTR(opmode, 0444, regulator_opmode_show, NULL), + __ATTR(state, 0444, regulator_state_show, NULL), + __ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL), + __ATTR(min_microamps, 0444, regulator_min_uA_show, NULL), + __ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL), + __ATTR(max_microamps, 0444, regulator_max_uA_show, NULL), + __ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL), + __ATTR(num_users, 0444, regulator_num_users_show, NULL), + __ATTR(type, 0444, regulator_type_show, NULL), + __ATTR(suspend_mem_microvolts, 0444, + regulator_suspend_mem_uV_show, NULL), + __ATTR(suspend_disk_microvolts, 0444, + regulator_suspend_disk_uV_show, NULL), + __ATTR(suspend_standby_microvolts, 0444, + regulator_suspend_standby_uV_show, NULL), + __ATTR(suspend_mem_mode, 0444, + regulator_suspend_mem_mode_show, NULL), + __ATTR(suspend_disk_mode, 0444, + regulator_suspend_disk_mode_show, NULL), + __ATTR(suspend_standby_mode, 0444, + regulator_suspend_standby_mode_show, NULL), + __ATTR(suspend_mem_state, 0444, + regulator_suspend_mem_state_show, NULL), + __ATTR(suspend_disk_state, 0444, + regulator_suspend_disk_state_show, NULL), + __ATTR(suspend_standby_state, 0444, + regulator_suspend_standby_state_show, NULL), + __ATTR_NULL, +}; + +static void regulator_dev_release(struct device *dev) +{ + struct regulator_dev *rdev = to_rdev(dev); + kfree(rdev); +} + +static struct class regulator_class = { + .name = "regulator", + .dev_release = regulator_dev_release, + .dev_attrs = regulator_dev_attrs, +}; + +/* Calculate the new optimum regulator operating mode based on the new total + * consumer load. All locks held by caller */ +static void drms_uA_update(struct regulator_dev *rdev) +{ + struct regulator *sibling; + int current_uA = 0, output_uV, input_uV, err; + unsigned int mode; + + err = regulator_check_drms(rdev); + if (err < 0 || !rdev->desc->ops->get_optimum_mode || + !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode); + return; + + /* get output voltage */ + output_uV = rdev->desc->ops->get_voltage(rdev); + if (output_uV <= 0) + return; + + /* get input voltage */ + if (rdev->supply && rdev->supply->desc->ops->get_voltage) + input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply); + else + input_uV = rdev->constraints->input_uV; + if (input_uV <= 0) + return; + + /* calc total requested load */ + list_for_each_entry(sibling, &rdev->consumer_list, list) + current_uA += sibling->uA_load; + + /* now get the optimum mode for our new total regulator load */ + mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, + output_uV, current_uA); + + /* check the new mode is allowed */ + err = regulator_check_mode(rdev, mode); + if (err == 0) + rdev->desc->ops->set_mode(rdev, mode); +} + +static int suspend_set_state(struct regulator_dev *rdev, + struct regulator_state *rstate) +{ + int ret = 0; + + /* enable & disable are mandatory for suspend control */ + if (!rdev->desc->ops->set_suspend_enable || + !rdev->desc->ops->set_suspend_disable) + return -EINVAL; + + if (rstate->enabled) + ret = rdev->desc->ops->set_suspend_enable(rdev); + else + ret = rdev->desc->ops->set_suspend_disable(rdev); + if (ret < 0) { + printk(KERN_ERR "%s: failed to enabled/disable\n", __func__); + return ret; + } + + if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) { + ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV); + if (ret < 0) { + printk(KERN_ERR "%s: failed to set voltage\n", + __func__); + return ret; + } + } + + if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) { + ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode); + if (ret < 0) { + printk(KERN_ERR "%s: failed to set mode\n", __func__); + return ret; + } + } + return ret; +} + +/* locks held by caller */ +static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state) +{ + if (!rdev->constraints) + return -EINVAL; + + switch (state) { + case PM_SUSPEND_STANDBY: + return suspend_set_state(rdev, + &rdev->constraints->state_standby); + case PM_SUSPEND_MEM: + return suspend_set_state(rdev, + &rdev->constraints->state_mem); + case PM_SUSPEND_MAX: + return suspend_set_state(rdev, + &rdev->constraints->state_disk); + default: + return -EINVAL; + } +} + +static void print_constraints(struct regulator_dev *rdev) +{ + struct regulation_constraints *constraints = rdev->constraints; + char buf[80]; + int count; + + if (rdev->desc->type == REGULATOR_VOLTAGE) { + if (constraints->min_uV == constraints->max_uV) + count = sprintf(buf, "%d mV ", + constraints->min_uV / 1000); + else + count = sprintf(buf, "%d <--> %d mV ", + constraints->min_uV / 1000, + constraints->max_uV / 1000); + } else { + if (constraints->min_uA == constraints->max_uA) + count = sprintf(buf, "%d mA ", + constraints->min_uA / 1000); + else + count = sprintf(buf, "%d <--> %d mA ", + constraints->min_uA / 1000, + constraints->max_uA / 1000); + } + if (constraints->valid_modes_mask & REGULATOR_MODE_FAST) + count += sprintf(buf + count, "fast "); + if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL) + count += sprintf(buf + count, "normal "); + if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE) + count += sprintf(buf + count, "idle "); + if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY) + count += sprintf(buf + count, "standby"); + + printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf); +} + +#define REG_STR_SIZE 32 + +static struct regulator *create_regulator(struct regulator_dev *rdev, + struct device *dev, + const char *supply_name) +{ + struct regulator *regulator; + char buf[REG_STR_SIZE]; + int err, size; + + regulator = kzalloc(sizeof(*regulator), GFP_KERNEL); + if (regulator == NULL) + return NULL; + + mutex_lock(&rdev->mutex); + regulator->rdev = rdev; + list_add(®ulator->list, &rdev->consumer_list); + + if (dev) { + /* create a 'requested_microamps_name' sysfs entry */ + size = scnprintf(buf, REG_STR_SIZE, "microamps_requested_%s", + supply_name); + if (size >= REG_STR_SIZE) + goto overflow_err; + + regulator->dev = dev; + regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL); + if (regulator->dev_attr.attr.name == NULL) + goto attr_name_err; + + regulator->dev_attr.attr.owner = THIS_MODULE; + regulator->dev_attr.attr.mode = 0444; + regulator->dev_attr.show = device_requested_uA_show; + err = device_create_file(dev, ®ulator->dev_attr); + if (err < 0) { + printk(KERN_WARNING "%s: could not add regulator_dev" + " load sysfs\n", __func__); + goto attr_name_err; + } + + /* also add a link to the device sysfs entry */ + size = scnprintf(buf, REG_STR_SIZE, "%s-%s", + dev->kobj.name, supply_name); + if (size >= REG_STR_SIZE) + goto attr_err; + + regulator->supply_name = kstrdup(buf, GFP_KERNEL); + if (regulator->supply_name == NULL) + goto attr_err; + + err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj, + buf); + if (err) { + printk(KERN_WARNING + "%s: could not add device link %s err %d\n", + __func__, dev->kobj.name, err); + device_remove_file(dev, ®ulator->dev_attr); + goto link_name_err; + } + } + mutex_unlock(&rdev->mutex); + return regulator; +link_name_err: + kfree(regulator->supply_name); +attr_err: + device_remove_file(regulator->dev, ®ulator->dev_attr); +attr_name_err: + kfree(regulator->dev_attr.attr.name); +overflow_err: + list_del(®ulator->list); + kfree(regulator); + mutex_unlock(&rdev->mutex); + return NULL; +} + +/** + * regulator_get - lookup and obtain a reference to a regulator. + * @dev: device for regulator "consumer" + * @id: Supply name or regulator ID. + * + * Returns a struct regulator corresponding to the regulator producer, + * or IS_ERR() condition containing errno. Use of supply names + * configured via regulator_set_device_supply() is strongly + * encouraged. + */ +struct regulator *regulator_get(struct device *dev, const char *id) +{ + struct regulator_dev *rdev; + struct regulator_map *map; + struct regulator *regulator = ERR_PTR(-ENODEV); + const char *supply = id; + + if (id == NULL) { + printk(KERN_ERR "regulator: get() with no identifier\n"); + return regulator; + } + + mutex_lock(®ulator_list_mutex); + + list_for_each_entry(map, ®ulator_map_list, list) { + if (dev == map->dev && + strcmp(map->supply, id) == 0) { + supply = map->regulator; + break; + } + } + + list_for_each_entry(rdev, ®ulator_list, list) { + if (strcmp(supply, rdev->desc->name) == 0 && + try_module_get(rdev->owner)) + goto found; + } + printk(KERN_ERR "regulator: Unable to get requested regulator: %s\n", + id); + mutex_unlock(®ulator_list_mutex); + return regulator; + +found: + regulator = create_regulator(rdev, dev, id); + if (regulator == NULL) { + regulator = ERR_PTR(-ENOMEM); + module_put(rdev->owner); + } + + mutex_unlock(®ulator_list_mutex); + return regulator; +} +EXPORT_SYMBOL_GPL(regulator_get); + +/** + * regulator_put - "free" the regulator source + * @regulator: regulator source + * + * Note: drivers must ensure that all regulator_enable calls made on this + * regulator source are balanced by regulator_disable calls prior to calling + * this function. + */ +void regulator_put(struct regulator *regulator) +{ + struct regulator_dev *rdev; + + if (regulator == NULL || IS_ERR(regulator)) + return; + + if (regulator->enabled) { + printk(KERN_WARNING "Releasing supply %s while enabled\n", + regulator->supply_name); + WARN_ON(regulator->enabled); + regulator_disable(regulator); + } + + mutex_lock(®ulator_list_mutex); + rdev = regulator->rdev; + + /* remove any sysfs entries */ + if (regulator->dev) { + sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name); + kfree(regulator->supply_name); + device_remove_file(regulator->dev, ®ulator->dev_attr); + kfree(regulator->dev_attr.attr.name); + } + list_del(®ulator->list); + kfree(regulator); + + module_put(rdev->owner); + mutex_unlock(®ulator_list_mutex); +} +EXPORT_SYMBOL_GPL(regulator_put); + +/* locks held by regulator_enable() */ +static int _regulator_enable(struct regulator_dev *rdev) +{ + int ret = -EINVAL; + + if (!rdev->constraints) { + printk(KERN_ERR "%s: %s has no constraints\n", + __func__, rdev->desc->name); + return ret; + } + + /* do we need to enable the supply regulator first */ + if (rdev->supply) { + ret = _regulator_enable(rdev->supply); + if (ret < 0) { + printk(KERN_ERR "%s: failed to enable %s: %d\n", + __func__, rdev->desc->name, ret); + return ret; + } + } + + /* check voltage and requested load before enabling */ + if (rdev->desc->ops->enable) { + + if (rdev->constraints && + (rdev->constraints->valid_ops_mask & + REGULATOR_CHANGE_DRMS)) + drms_uA_update(rdev); + + ret = rdev->desc->ops->enable(rdev); + if (ret < 0) { + printk(KERN_ERR "%s: failed to enable %s: %d\n", + __func__, rdev->desc->name, ret); + return ret; + } + rdev->use_count++; + return ret; + } + + return ret; +} + +/** + * regulator_enable - enable regulator output + * @regulator: regulator source + * + * Enable the regulator output at the predefined voltage or current value. + * NOTE: the output value can be set by other drivers, boot loader or may be + * hardwired in the regulator. + * NOTE: calls to regulator_enable() must be balanced with calls to + * regulator_disable(). + */ +int regulator_enable(struct regulator *regulator) +{ + int ret; + + if (regulator->enabled) { + printk(KERN_CRIT "Regulator %s already enabled\n", + regulator->supply_name); + WARN_ON(regulator->enabled); + return 0; + } + + mutex_lock(®ulator->rdev->mutex); + regulator->enabled = 1; + ret = _regulator_enable(regulator->rdev); + if (ret != 0) + regulator->enabled = 0; + mutex_unlock(®ulator->rdev->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_enable); + +/* locks held by regulator_disable() */ +static int _regulator_disable(struct regulator_dev *rdev) +{ + int ret = 0; + + /* are we the last user and permitted to disable ? */ + if (rdev->use_count == 1 && !rdev->constraints->always_on) { + + /* we are last user */ + if (rdev->desc->ops->disable) { + ret = rdev->desc->ops->disable(rdev); + if (ret < 0) { + printk(KERN_ERR "%s: failed to disable %s\n", + __func__, rdev->desc->name); + return ret; + } + } + + /* decrease our supplies ref count and disable if required */ + if (rdev->supply) + _regulator_disable(rdev->supply); + + rdev->use_count = 0; + } else if (rdev->use_count > 1) { + + if (rdev->constraints && + (rdev->constraints->valid_ops_mask & + REGULATOR_CHANGE_DRMS)) + drms_uA_update(rdev); + + rdev->use_count--; + } + return ret; +} + +/** + * regulator_disable - disable regulator output + * @regulator: regulator source + * + * Disable the regulator output voltage or current. + * NOTE: this will only disable the regulator output if no other consumer + * devices have it enabled. + * NOTE: calls to regulator_enable() must be balanced with calls to + * regulator_disable(). + */ +int regulator_disable(struct regulator *regulator) +{ + int ret; + + if (!regulator->enabled) { + printk(KERN_ERR "%s: not in use by this consumer\n", + __func__); + return 0; + } + + mutex_lock(®ulator->rdev->mutex); + regulator->enabled = 0; + regulator->uA_load = 0; + ret = _regulator_disable(regulator->rdev); + mutex_unlock(®ulator->rdev->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_disable); + +/* locks held by regulator_force_disable() */ +static int _regulator_force_disable(struct regulator_dev *rdev) +{ + int ret = 0; + + /* force disable */ + if (rdev->desc->ops->disable) { + /* ah well, who wants to live forever... */ + ret = rdev->desc->ops->disable(rdev); + if (ret < 0) { + printk(KERN_ERR "%s: failed to force disable %s\n", + __func__, rdev->desc->name); + return ret; + } + /* notify other consumers that power has been forced off */ + _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE, + NULL); + } + + /* decrease our supplies ref count and disable if required */ + if (rdev->supply) + _regulator_disable(rdev->supply); + + rdev->use_count = 0; + return ret; +} + +/** + * regulator_force_disable - force disable regulator output + * @regulator: regulator source + * + * Forcibly disable the regulator output voltage or current. + * NOTE: this *will* disable the regulator output even if other consumer + * devices have it enabled. This should be used for situations when device + * damage will likely occur if the regulator is not disabled (e.g. over temp). + */ +int regulator_force_disable(struct regulator *regulator) +{ + int ret; + + mutex_lock(®ulator->rdev->mutex); + regulator->enabled = 0; + regulator->uA_load = 0; + ret = _regulator_force_disable(regulator->rdev); + mutex_unlock(®ulator->rdev->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_force_disable); + +static int _regulator_is_enabled(struct regulator_dev *rdev) +{ + int ret; + + mutex_lock(&rdev->mutex); + + /* sanity check */ + if (!rdev->desc->ops->is_enabled) { + ret = -EINVAL; + goto out; + } + + ret = rdev->desc->ops->is_enabled(rdev); +out: + mutex_unlock(&rdev->mutex); + return ret; +} + +/** + * regulator_is_enabled - is the regulator output enabled + * @regulator: regulator source + * + * Returns zero for disabled otherwise return number of enable requests. + */ +int regulator_is_enabled(struct regulator *regulator) +{ + return _regulator_is_enabled(regulator->rdev); +} +EXPORT_SYMBOL_GPL(regulator_is_enabled); + +/** + * regulator_set_voltage - set regulator output voltage + * @regulator: regulator source + * @min_uV: Minimum required voltage in uV + * @max_uV: Maximum acceptable voltage in uV + * + * Sets a voltage regulator to the desired output voltage. This can be set + * during any regulator state. IOW, regulator can be disabled or enabled. + * + * If the regulator is enabled then the voltage will change to the new value + * immediately otherwise if the regulator is disabled the regulator will + * output at the new voltage when enabled. + * + * NOTE: If the regulator is shared between several devices then the lowest + * request voltage that meets the system constraints will be used. + * NOTE: Regulator system constraints must be set for this regulator before + * calling this function otherwise this call will fail. + */ +int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) +{ + struct regulator_dev *rdev = regulator->rdev; + int ret; + + mutex_lock(&rdev->mutex); + + /* sanity check */ + if (!rdev->desc->ops->set_voltage) { + ret = -EINVAL; + goto out; + } + + /* constraints check */ + ret = regulator_check_voltage(rdev, &min_uV, &max_uV); + if (ret < 0) + goto out; + regulator->min_uV = min_uV; + regulator->max_uV = max_uV; + ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV); + +out: + mutex_unlock(&rdev->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_voltage); + +static int _regulator_get_voltage(struct regulator_dev *rdev) +{ + /* sanity check */ + if (rdev->desc->ops->get_voltage) + return rdev->desc->ops->get_voltage(rdev); + else + return -EINVAL; +} + +/** + * regulator_get_voltage - get regulator output voltage + * @regulator: regulator source + * + * This returns the current regulator voltage in uV. + * + * NOTE: If the regulator is disabled it will return the voltage value. This + * function should not be used to determine regulator state. + */ +int regulator_get_voltage(struct regulator *regulator) +{ + int ret; + + mutex_lock(®ulator->rdev->mutex); + + ret = _regulator_get_voltage(regulator->rdev); + + mutex_unlock(®ulator->rdev->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_get_voltage); + +/** + * regulator_set_current_limit - set regulator output current limit + * @regulator: regulator source + * @min_uA: Minimuum supported current in uA + * @max_uA: Maximum supported current in uA + * + * Sets current sink to the desired output current. This can be set during + * any regulator state. IOW, regulator can be disabled or enabled. + * + * If the regulator is enabled then the current will change to the new value + * immediately otherwise if the regulator is disabled the regulator will + * output at the new current when enabled. + * + * NOTE: Regulator system constraints must be set for this regulator before + * calling this function otherwise this call will fail. + */ +int regulator_set_current_limit(struct regulator *regulator, + int min_uA, int max_uA) +{ + struct regulator_dev *rdev = regulator->rdev; + int ret; + + mutex_lock(&rdev->mutex); + + /* sanity check */ + if (!rdev->desc->ops->set_current_limit) { + ret = -EINVAL; + goto out; + } + + /* constraints check */ + ret = regulator_check_current_limit(rdev, &min_uA, &max_uA); + if (ret < 0) + goto out; + + ret = rdev->desc->ops->set_current_limit(rdev, min_uA, max_uA); +out: + mutex_unlock(&rdev->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_current_limit); + +static int _regulator_get_current_limit(struct regulator_dev *rdev) +{ + int ret; + + mutex_lock(&rdev->mutex); + + /* sanity check */ + if (!rdev->desc->ops->get_current_limit) { + ret = -EINVAL; + goto out; + } + + ret = rdev->desc->ops->get_current_limit(rdev); +out: + mutex_unlock(&rdev->mutex); + return ret; +} + +/** + * regulator_get_current_limit - get regulator output current + * @regulator: regulator source + * + * This returns the current supplied by the specified current sink in uA. + * + * NOTE: If the regulator is disabled it will return the current value. This + * function should not be used to determine regulator state. + */ +int regulator_get_current_limit(struct regulator *regulator) +{ + return _regulator_get_current_limit(regulator->rdev); +} +EXPORT_SYMBOL_GPL(regulator_get_current_limit); + +/** + * regulator_set_mode - set regulator operating mode + * @regulator: regulator source + * @mode: operating mode - one of the REGULATOR_MODE constants + * + * Set regulator operating mode to increase regulator efficiency or improve + * regulation performance. + * + * NOTE: Regulator system constraints must be set for this regulator before + * calling this function otherwise this call will fail. + */ +int regulator_set_mode(struct regulator *regulator, unsigned int mode) +{ + struct regulator_dev *rdev = regulator->rdev; + int ret; + + mutex_lock(&rdev->mutex); + + /* sanity check */ + if (!rdev->desc->ops->set_mode) { + ret = -EINVAL; + goto out; + } + + /* constraints check */ + ret = regulator_check_mode(rdev, mode); + if (ret < 0) + goto out; + + ret = rdev->desc->ops->set_mode(rdev, mode); +out: + mutex_unlock(&rdev->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_mode); + +static unsigned int _regulator_get_mode(struct regulator_dev *rdev) +{ + int ret; + + mutex_lock(&rdev->mutex); + + /* sanity check */ + if (!rdev->desc->ops->get_mode) { + ret = -EINVAL; + goto out; + } + + ret = rdev->desc->ops->get_mode(rdev); +out: + mutex_unlock(&rdev->mutex); + return ret; +} + +/** + * regulator_get_mode - get regulator operating mode + * @regulator: regulator source + * + * Get the current regulator operating mode. + */ +unsigned int regulator_get_mode(struct regulator *regulator) +{ + return _regulator_get_mode(regulator->rdev); +} +EXPORT_SYMBOL_GPL(regulator_get_mode); + +/** + * regulator_set_optimum_mode - set regulator optimum operating mode + * @regulator: regulator source + * @uA_load: load current + * + * Notifies the regulator core of a new device load. This is then used by + * DRMS (if enabled by constraints) to set the most efficient regulator + * operating mode for the new regulator loading. + * + * Consumer devices notify their supply regulator of the maximum power + * they will require (can be taken from device datasheet in the power + * consumption tables) when they change operational status and hence power + * state. Examples of operational state changes that can affect power + * consumption are :- + * + * o Device is opened / closed. + * o Device I/O is about to begin or has just finished. + * o Device is idling in between work. + * + * This information is also exported via sysfs to userspace. + * + * DRMS will sum the total requested load on the regulator and change + * to the most efficient operating mode if platform constraints allow. + * + * Returns the new regulator mode or error. + */ +int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) +{ + struct regulator_dev *rdev = regulator->rdev; + struct regulator *consumer; + int ret, output_uV, input_uV, total_uA_load = 0; + unsigned int mode; + + mutex_lock(&rdev->mutex); + + regulator->uA_load = uA_load; + ret = regulator_check_drms(rdev); + if (ret < 0) + goto out; + ret = -EINVAL; + + /* sanity check */ + if (!rdev->desc->ops->get_optimum_mode) + goto out; + + /* get output voltage */ + output_uV = rdev->desc->ops->get_voltage(rdev); + if (output_uV <= 0) { + printk(KERN_ERR "%s: invalid output voltage found for %s\n", + __func__, rdev->desc->name); + goto out; + } + + /* get input voltage */ + if (rdev->supply && rdev->supply->desc->ops->get_voltage) + input_uV = rdev->supply->desc->ops->get_voltage(rdev->supply); + else + input_uV = rdev->constraints->input_uV; + if (input_uV <= 0) { + printk(KERN_ERR "%s: invalid input voltage found for %s\n", + __func__, rdev->desc->name); + goto out; + } + + /* calc total requested load for this regulator */ + list_for_each_entry(consumer, &rdev->consumer_list, list) + total_uA_load += consumer->uA_load; + + mode = rdev->desc->ops->get_optimum_mode(rdev, + input_uV, output_uV, + total_uA_load); + if (ret <= 0) { + printk(KERN_ERR "%s: failed to get optimum mode for %s @" + " %d uA %d -> %d uV\n", __func__, rdev->desc->name, + total_uA_load, input_uV, output_uV); + goto out; + } + + ret = rdev->desc->ops->set_mode(rdev, mode); + if (ret <= 0) { + printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n", + __func__, mode, rdev->desc->name); + goto out; + } + ret = mode; +out: + mutex_unlock(&rdev->mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_optimum_mode); + +/** + * regulator_register_notifier - register regulator event notifier + * @regulator: regulator source + * @notifier_block: notifier block + * + * Register notifier block to receive regulator events. + */ +int regulator_register_notifier(struct regulator *regulator, + struct notifier_block *nb) +{ + return blocking_notifier_chain_register(®ulator->rdev->notifier, + nb); +} +EXPORT_SYMBOL_GPL(regulator_register_notifier); + +/** + * regulator_unregister_notifier - unregister regulator event notifier + * @regulator: regulator source + * @notifier_block: notifier block + * + * Unregister regulator event notifier block. + */ +int regulator_unregister_notifier(struct regulator *regulator, + struct notifier_block *nb) +{ + return blocking_notifier_chain_unregister(®ulator->rdev->notifier, + nb); +} +EXPORT_SYMBOL_GPL(regulator_unregister_notifier); + +/* notify regulator consumers and downstream regulator consumers */ +static void _notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data) +{ + struct regulator_dev *_rdev; + + /* call rdev chain first */ + mutex_lock(&rdev->mutex); + blocking_notifier_call_chain(&rdev->notifier, event, NULL); + mutex_unlock(&rdev->mutex); + + /* now notify regulator we supply */ + list_for_each_entry(_rdev, &rdev->supply_list, slist) + _notifier_call_chain(_rdev, event, data); +} + +/** + * regulator_bulk_get - get multiple regulator consumers + * + * @dev: Device to supply + * @num_consumers: Number of consumers to register + * @consumers: Configuration of consumers; clients are stored here. + * + * @return 0 on success, an errno on failure. + * + * This helper function allows drivers to get several regulator + * consumers in one operation. If any of the regulators cannot be + * acquired then any regulators that were allocated will be freed + * before returning to the caller. + */ +int regulator_bulk_get(struct device *dev, int num_consumers, + struct regulator_bulk_data *consumers) +{ + int i; + int ret; + + for (i = 0; i < num_consumers; i++) + consumers[i].consumer = NULL; + + for (i = 0; i < num_consumers; i++) { + consumers[i].consumer = regulator_get(dev, + consumers[i].supply); + if (IS_ERR(consumers[i].consumer)) { + dev_err(dev, "Failed to get supply '%s'\n", + consumers[i].supply); + ret = PTR_ERR(consumers[i].consumer); + consumers[i].consumer = NULL; + goto err; + } + } + + return 0; + +err: + for (i = 0; i < num_consumers && consumers[i].consumer; i++) + regulator_put(consumers[i].consumer); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_bulk_get); + +/** + * regulator_bulk_enable - enable multiple regulator consumers + * + * @num_consumers: Number of consumers + * @consumers: Consumer data; clients are stored here. + * @return 0 on success, an errno on failure + * + * This convenience API allows consumers to enable multiple regulator + * clients in a single API call. If any consumers cannot be enabled + * then any others that were enabled will be disabled again prior to + * return. + */ +int regulator_bulk_enable(int num_consumers, + struct regulator_bulk_data *consumers) +{ + int i; + int ret; + + for (i = 0; i < num_consumers; i++) { + ret = regulator_enable(consumers[i].consumer); + if (ret != 0) + goto err; + } + + return 0; + +err: + printk(KERN_ERR "Failed to enable %s\n", consumers[i].supply); + for (i = 0; i < num_consumers; i++) + regulator_disable(consumers[i].consumer); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_bulk_enable); + +/** + * regulator_bulk_disable - disable multiple regulator consumers + * + * @num_consumers: Number of consumers + * @consumers: Consumer data; clients are stored here. + * @return 0 on success, an errno on failure + * + * This convenience API allows consumers to disable multiple regulator + * clients in a single API call. If any consumers cannot be enabled + * then any others that were disabled will be disabled again prior to + * return. + */ +int regulator_bulk_disable(int num_consumers, + struct regulator_bulk_data *consumers) +{ + int i; + int ret; + + for (i = 0; i < num_consumers; i++) { + ret = regulator_disable(consumers[i].consumer); + if (ret != 0) + goto err; + } + + return 0; + +err: + printk(KERN_ERR "Failed to disable %s\n", consumers[i].supply); + for (i = 0; i < num_consumers; i++) + regulator_enable(consumers[i].consumer); + + return ret; +} +EXPORT_SYMBOL_GPL(regulator_bulk_disable); + +/** + * regulator_bulk_free - free multiple regulator consumers + * + * @num_consumers: Number of consumers + * @consumers: Consumer data; clients are stored here. + * + * This convenience API allows consumers to free multiple regulator + * clients in a single API call. + */ +void regulator_bulk_free(int num_consumers, + struct regulator_bulk_data *consumers) +{ + int i; + + for (i = 0; i < num_consumers; i++) { + regulator_put(consumers[i].consumer); + consumers[i].consumer = NULL; + } +} +EXPORT_SYMBOL_GPL(regulator_bulk_free); + +/** + * regulator_notifier_call_chain - call regulator event notifier + * @regulator: regulator source + * @event: notifier block + * @data: + * + * Called by regulator drivers to notify clients a regulator event has + * occurred. We also notify regulator clients downstream. + */ +int regulator_notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data) +{ + _notifier_call_chain(rdev, event, data); + return NOTIFY_DONE; + +} +EXPORT_SYMBOL_GPL(regulator_notifier_call_chain); + +/** + * regulator_register - register regulator + * @regulator: regulator source + * @reg_data: private regulator data + * + * Called by regulator drivers to register a regulator. + * Returns 0 on success. + */ +struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, + void *reg_data) +{ + static atomic_t regulator_no = ATOMIC_INIT(0); + struct regulator_dev *rdev; + int ret; + + if (regulator_desc == NULL) + return ERR_PTR(-EINVAL); + + if (regulator_desc->name == NULL || regulator_desc->ops == NULL) + return ERR_PTR(-EINVAL); + + if (!regulator_desc->type == REGULATOR_VOLTAGE && + !regulator_desc->type == REGULATOR_CURRENT) + return ERR_PTR(-EINVAL); + + rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL); + if (rdev == NULL) + return ERR_PTR(-ENOMEM); + + mutex_lock(®ulator_list_mutex); + + mutex_init(&rdev->mutex); + rdev->reg_data = reg_data; + rdev->owner = regulator_desc->owner; + rdev->desc = regulator_desc; + INIT_LIST_HEAD(&rdev->consumer_list); + INIT_LIST_HEAD(&rdev->supply_list); + INIT_LIST_HEAD(&rdev->list); + INIT_LIST_HEAD(&rdev->slist); + BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier); + + rdev->dev.class = ®ulator_class; + device_initialize(&rdev->dev); + snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id), + "regulator_%ld_%s", + (unsigned long)atomic_inc_return(®ulator_no) - 1, + regulator_desc->name); + + ret = device_add(&rdev->dev); + if (ret == 0) + list_add(&rdev->list, ®ulator_list); + else { + kfree(rdev); + rdev = ERR_PTR(ret); + } + mutex_unlock(®ulator_list_mutex); + return rdev; +} +EXPORT_SYMBOL_GPL(regulator_register); + +/** + * regulator_unregister - unregister regulator + * @regulator: regulator source + * + * Called by regulator drivers to unregister a regulator. + */ +void regulator_unregister(struct regulator_dev *rdev) +{ + if (rdev == NULL) + return; + + mutex_lock(®ulator_list_mutex); + list_del(&rdev->list); + if (rdev->supply) + sysfs_remove_link(&rdev->dev.kobj, "supply"); + device_unregister(&rdev->dev); + mutex_unlock(®ulator_list_mutex); +} +EXPORT_SYMBOL_GPL(regulator_unregister); + +/** + * regulator_set_supply - set regulator supply regulator + * @regulator: regulator name + * @supply: supply regulator name + * + * Called by platform initialisation code to set the supply regulator for this + * regulator. This ensures that a regulators supply will also be enabled by the + * core if it's child is enabled. + */ +int regulator_set_supply(const char *regulator, const char *supply) +{ + struct regulator_dev *rdev, *supply_rdev; + int err; + + if (regulator == NULL || supply == NULL) + return -EINVAL; + + mutex_lock(®ulator_list_mutex); + + list_for_each_entry(rdev, ®ulator_list, list) { + if (!strcmp(rdev->desc->name, regulator)) + goto found_regulator; + } + mutex_unlock(®ulator_list_mutex); + return -ENODEV; + +found_regulator: + list_for_each_entry(supply_rdev, ®ulator_list, list) { + if (!strcmp(supply_rdev->desc->name, supply)) + goto found_supply; + } + mutex_unlock(®ulator_list_mutex); + return -ENODEV; + +found_supply: + err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj, + "supply"); + if (err) { + printk(KERN_ERR + "%s: could not add device link %s err %d\n", + __func__, supply_rdev->dev.kobj.name, err); + goto out; + } + rdev->supply = supply_rdev; + list_add(&rdev->slist, &supply_rdev->supply_list); +out: + mutex_unlock(®ulator_list_mutex); + return err; +} +EXPORT_SYMBOL_GPL(regulator_set_supply); + +/** + * regulator_get_supply - get regulator supply regulator + * @regulator: regulator name + * + * Returns the supply supply regulator name or NULL if no supply regulator + * exists (i.e the regulator is supplied directly from USB, Line, Battery, etc) + */ +const char *regulator_get_supply(const char *regulator) +{ + struct regulator_dev *rdev; + + if (regulator == NULL) + return NULL; + + mutex_lock(®ulator_list_mutex); + list_for_each_entry(rdev, ®ulator_list, list) { + if (!strcmp(rdev->desc->name, regulator)) + goto found; + } + mutex_unlock(®ulator_list_mutex); + return NULL; + +found: + mutex_unlock(®ulator_list_mutex); + if (rdev->supply) + return rdev->supply->desc->name; + else + return NULL; +} +EXPORT_SYMBOL_GPL(regulator_get_supply); + +/** + * regulator_set_machine_constraints - sets regulator constraints + * @regulator: regulator source + * + * Allows platform initialisation code to define and constrain + * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: + * Constraints *must* be set by platform code in order for some + * regulator operations to proceed i.e. set_voltage, set_current_limit, + * set_mode. + */ +int regulator_set_machine_constraints(const char *regulator_name, + struct regulation_constraints *constraints) +{ + struct regulator_dev *rdev; + int ret = 0; + + if (regulator_name == NULL) + return -EINVAL; + + mutex_lock(®ulator_list_mutex); + + list_for_each_entry(rdev, ®ulator_list, list) { + if (!strcmp(regulator_name, rdev->desc->name)) + goto found; + } + ret = -ENODEV; + goto out; + +found: + mutex_lock(&rdev->mutex); + rdev->constraints = constraints; + + /* do we need to apply the constraint voltage */ + if (rdev->constraints->apply_uV && + rdev->constraints->min_uV == rdev->constraints->max_uV && + rdev->desc->ops->set_voltage) { + ret = rdev->desc->ops->set_voltage(rdev, + rdev->constraints->min_uV, rdev->constraints->max_uV); + if (ret < 0) { + printk(KERN_ERR "%s: failed to apply %duV" + " constraint\n", __func__, + rdev->constraints->min_uV); + rdev->constraints = NULL; + goto out; + } + } + + /* are we enabled at boot time by firmware / bootloader */ + if (rdev->constraints->boot_on) + rdev->use_count = 1; + + /* do we need to setup our suspend state */ + if (constraints->initial_state) + ret = suspend_prepare(rdev, constraints->initial_state); + + print_constraints(rdev); + mutex_unlock(&rdev->mutex); + +out: + mutex_unlock(®ulator_list_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_set_machine_constraints); + + +/** + * regulator_set_device_supply: Bind a regulator to a symbolic supply + * @regulator: regulator source + * @dev: device the supply applies to + * @supply: symbolic name for supply + * + * Allows platform initialisation code to map physical regulator + * sources to symbolic names for supplies for use by devices. Devices + * should use these symbolic names to request regulators, avoiding the + * need to provide board-specific regulator names as platform data. + */ +int regulator_set_device_supply(const char *regulator, struct device *dev, + const char *supply) +{ + struct regulator_map *node; + + if (regulator == NULL || supply == NULL) + return -EINVAL; + + node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL); + if (node == NULL) + return -ENOMEM; + + node->regulator = regulator; + node->dev = dev; + node->supply = supply; + + mutex_lock(®ulator_list_mutex); + list_add(&node->list, ®ulator_map_list); + mutex_unlock(®ulator_list_mutex); + return 0; +} +EXPORT_SYMBOL_GPL(regulator_set_device_supply); + +/** + * regulator_suspend_prepare: prepare regulators for system wide suspend + * @state: system suspend state + * + * Configure each regulator with it's suspend operating parameters for state. + * This will usually be called by machine suspend code prior to supending. + */ +int regulator_suspend_prepare(suspend_state_t state) +{ + struct regulator_dev *rdev; + int ret = 0; + + /* ON is handled by regulator active state */ + if (state == PM_SUSPEND_ON) + return -EINVAL; + + mutex_lock(®ulator_list_mutex); + list_for_each_entry(rdev, ®ulator_list, list) { + + mutex_lock(&rdev->mutex); + ret = suspend_prepare(rdev, state); + mutex_unlock(&rdev->mutex); + + if (ret < 0) { + printk(KERN_ERR "%s: failed to prepare %s\n", + __func__, rdev->desc->name); + goto out; + } + } +out: + mutex_unlock(®ulator_list_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(regulator_suspend_prepare); + +/** + * rdev_get_drvdata - get rdev regulator driver data + * @regulator: regulator + * + * Get rdev regulator driver private data. This call can be used in the + * regulator driver context. + */ +void *rdev_get_drvdata(struct regulator_dev *rdev) +{ + return rdev->reg_data; +} +EXPORT_SYMBOL_GPL(rdev_get_drvdata); + +/** + * regulator_get_drvdata - get regulator driver data + * @regulator: regulator + * + * Get regulator driver private data. This call can be used in the consumer + * driver context when non API regulator specific functions need to be called. + */ +void *regulator_get_drvdata(struct regulator *regulator) +{ + return regulator->rdev->reg_data; +} +EXPORT_SYMBOL_GPL(regulator_get_drvdata); + +/** + * regulator_set_drvdata - set regulator driver data + * @regulator: regulator + * @data: data + */ +void regulator_set_drvdata(struct regulator *regulator, void *data) +{ + regulator->rdev->reg_data = data; +} +EXPORT_SYMBOL_GPL(regulator_set_drvdata); + +/** + * regulator_get_id - get regulator ID + * @regulator: regulator + */ +int rdev_get_id(struct regulator_dev *rdev) +{ + return rdev->desc->id; +} +EXPORT_SYMBOL_GPL(rdev_get_id); + +static int __init regulator_init(void) +{ + printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION); + return class_register(®ulator_class); +} + +/* init early to allow our consumers to complete system booting */ +core_initcall(regulator_init); -- GitLab From 4b74ff6512492dedea353f89d9b56cb715df0d7f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 30 Apr 2008 16:27:12 +0100 Subject: [PATCH 0307/1024] regulator: add support for fixed regulators. This adds supports for regulator that are not software controlable. It allows them to coexist in systems with mixed supplies. Signed-off-by: Mark Brown Signed-off-by: Mike Rapoport Signed-off-by: Liam Girdwood --- drivers/regulator/fixed.c | 129 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 129 insertions(+) create mode 100644 drivers/regulator/fixed.c diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c new file mode 100644 index 00000000000..d31db3e1491 --- /dev/null +++ b/drivers/regulator/fixed.c @@ -0,0 +1,129 @@ +/* + * fixed.c + * + * Copyright 2008 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This is useful for systems with mixed controllable and + * non-controllable regulators, as well as for allowing testing on + * systems with no controllable regulators. + */ + +#include +#include +#include +#include +#include + +struct fixed_voltage_data { + struct regulator_desc desc; + struct regulator_dev *dev; + int microvolts; +}; + +static int fixed_voltage_is_enabled(struct regulator_dev *dev) +{ + return 1; +} + +static int fixed_voltage_enable(struct regulator_dev *dev) +{ + return 0; +} + +static int fixed_voltage_get_voltage(struct regulator_dev *dev) +{ + struct fixed_voltage_data *data = rdev_get_drvdata(dev); + + return data->microvolts; +} + +static struct regulator_ops fixed_voltage_ops = { + .is_enabled = fixed_voltage_is_enabled, + .enable = fixed_voltage_enable, + .get_voltage = fixed_voltage_get_voltage, +}; + +static int regulator_fixed_voltage_probe(struct platform_device *pdev) +{ + struct fixed_voltage_config *config = pdev->dev.platform_data; + struct fixed_voltage_data *drvdata; + int ret; + + drvdata = kzalloc(sizeof(struct fixed_voltage_data), GFP_KERNEL); + if (drvdata == NULL) { + ret = -ENOMEM; + goto err; + } + + drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL); + if (drvdata->desc.name == NULL) { + ret = -ENOMEM; + goto err; + } + drvdata->desc.type = REGULATOR_VOLTAGE; + drvdata->desc.owner = THIS_MODULE; + drvdata->desc.ops = &fixed_voltage_ops, + + drvdata->microvolts = config->microvolts; + + drvdata->dev = regulator_register(&drvdata->desc, drvdata); + if (IS_ERR(drvdata->dev)) { + ret = PTR_ERR(drvdata->dev); + goto err_name; + } + + platform_set_drvdata(pdev, drvdata); + + dev_dbg(&pdev->dev, "%s supplying %duV\n", drvdata->desc.name, + drvdata->microvolts); + + return 0; + +err_name: + kfree(drvdata->desc.name); +err: + kfree(drvdata); + return ret; +} + +static int regulator_fixed_voltage_remove(struct platform_device *pdev) +{ + struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev); + + regulator_unregister(drvdata->dev); + kfree(drvdata->desc.name); + kfree(drvdata); + + return 0; +} + +static struct platform_driver regulator_fixed_voltage_driver = { + .probe = regulator_fixed_voltage_probe, + .remove = regulator_fixed_voltage_remove, + .driver = { + .name = "reg-fixed-voltage", + }, +}; + +static int __init regulator_fixed_voltage_init(void) +{ + return platform_driver_register(®ulator_fixed_voltage_driver); +} +module_init(regulator_fixed_voltage_init); + +static void __exit regulator_fixed_voltage_exit(void) +{ + platform_driver_unregister(®ulator_fixed_voltage_driver); +} +module_exit(regulator_fixed_voltage_exit); + +MODULE_AUTHOR("Mark Brown "); +MODULE_DESCRIPTION("Fixed voltage regulator"); +MODULE_LICENSE("GPL"); -- GitLab From c080909eef2b3e7fba70f57cde3264fba95bdf09 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 30 Apr 2008 17:05:33 +0100 Subject: [PATCH 0308/1024] regulator: regulator test harness This provides a virtual regulator test harness which exposes a sysfs interface for setting power requirements, intended for test purposes only. Signed-off-by: Mark Brown Signed-off-by: Philipp Zabel Signed-off-by: Liam Girdwood --- drivers/regulator/virtual.c | 345 ++++++++++++++++++++++++++++++++++++ 1 file changed, 345 insertions(+) create mode 100644 drivers/regulator/virtual.c diff --git a/drivers/regulator/virtual.c b/drivers/regulator/virtual.c new file mode 100644 index 00000000000..5ddb464b1c3 --- /dev/null +++ b/drivers/regulator/virtual.c @@ -0,0 +1,345 @@ +/* + * reg-virtual-consumer.c + * + * Copyright 2008 Wolfson Microelectronics PLC. + * + * Author: Mark Brown + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + */ + +#include +#include +#include +#include + +struct virtual_consumer_data { + struct mutex lock; + struct regulator *regulator; + int enabled; + int min_uV; + int max_uV; + int min_uA; + int max_uA; + unsigned int mode; +}; + +static void update_voltage_constraints(struct virtual_consumer_data *data) +{ + int ret; + + if (data->min_uV && data->max_uV + && data->min_uV <= data->max_uV) { + ret = regulator_set_voltage(data->regulator, + data->min_uV, data->max_uV); + if (ret != 0) { + printk(KERN_ERR "regulator_set_voltage() failed: %d\n", + ret); + return; + } + } + + if (data->min_uV && data->max_uV && !data->enabled) { + ret = regulator_enable(data->regulator); + if (ret == 0) + data->enabled = 1; + else + printk(KERN_ERR "regulator_enable() failed: %d\n", + ret); + } + + if (!(data->min_uV && data->max_uV) && data->enabled) { + ret = regulator_disable(data->regulator); + if (ret == 0) + data->enabled = 0; + else + printk(KERN_ERR "regulator_disable() failed: %d\n", + ret); + } +} + +static void update_current_limit_constraints(struct virtual_consumer_data + *data) +{ + int ret; + + if (data->max_uA + && data->min_uA <= data->max_uA) { + ret = regulator_set_current_limit(data->regulator, + data->min_uA, data->max_uA); + if (ret != 0) { + pr_err("regulator_set_current_limit() failed: %d\n", + ret); + return; + } + } + + if (data->max_uA && !data->enabled) { + ret = regulator_enable(data->regulator); + if (ret == 0) + data->enabled = 1; + else + printk(KERN_ERR "regulator_enable() failed: %d\n", + ret); + } + + if (!(data->min_uA && data->max_uA) && data->enabled) { + ret = regulator_disable(data->regulator); + if (ret == 0) + data->enabled = 0; + else + printk(KERN_ERR "regulator_disable() failed: %d\n", + ret); + } +} + +static ssize_t show_min_uV(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", data->min_uV); +} + +static ssize_t set_min_uV(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + long val; + + if (strict_strtol(buf, 10, &val) != 0) + return count; + + mutex_lock(&data->lock); + + data->min_uV = val; + update_voltage_constraints(data); + + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_max_uV(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", data->max_uV); +} + +static ssize_t set_max_uV(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + long val; + + if (strict_strtol(buf, 10, &val) != 0) + return count; + + mutex_lock(&data->lock); + + data->max_uV = val; + update_voltage_constraints(data); + + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_min_uA(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", data->min_uA); +} + +static ssize_t set_min_uA(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + long val; + + if (strict_strtol(buf, 10, &val) != 0) + return count; + + mutex_lock(&data->lock); + + data->min_uA = val; + update_current_limit_constraints(data); + + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_max_uA(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", data->max_uA); +} + +static ssize_t set_max_uA(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + long val; + + if (strict_strtol(buf, 10, &val) != 0) + return count; + + mutex_lock(&data->lock); + + data->max_uA = val; + update_current_limit_constraints(data); + + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t show_mode(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + + switch (data->mode) { + case REGULATOR_MODE_FAST: + return sprintf(buf, "fast\n"); + case REGULATOR_MODE_NORMAL: + return sprintf(buf, "normal\n"); + case REGULATOR_MODE_IDLE: + return sprintf(buf, "idle\n"); + case REGULATOR_MODE_STANDBY: + return sprintf(buf, "standby\n"); + default: + return sprintf(buf, "unknown\n"); + } +} + +static ssize_t set_mode(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct virtual_consumer_data *data = dev_get_drvdata(dev); + unsigned int mode; + int ret; + + if (strncmp(buf, "fast", strlen("fast")) == 0) + mode = REGULATOR_MODE_FAST; + else if (strncmp(buf, "normal", strlen("normal")) == 0) + mode = REGULATOR_MODE_NORMAL; + else if (strncmp(buf, "idle", strlen("idle")) == 0) + mode = REGULATOR_MODE_IDLE; + else if (strncmp(buf, "standby", strlen("standby")) == 0) + mode = REGULATOR_MODE_STANDBY; + else { + dev_err(dev, "Configuring invalid mode\n"); + return count; + } + + mutex_lock(&data->lock); + ret = regulator_set_mode(data->regulator, mode); + if (ret == 0) + data->mode = mode; + else + dev_err(dev, "Failed to configure mode: %d\n", ret); + mutex_unlock(&data->lock); + + return count; +} + +static DEVICE_ATTR(min_microvolts, 0666, show_min_uV, set_min_uV); +static DEVICE_ATTR(max_microvolts, 0666, show_max_uV, set_max_uV); +static DEVICE_ATTR(min_microamps, 0666, show_min_uA, set_min_uA); +static DEVICE_ATTR(max_microamps, 0666, show_max_uA, set_max_uA); +static DEVICE_ATTR(mode, 0666, show_mode, set_mode); + +struct device_attribute *attributes[] = { + &dev_attr_min_microvolts, + &dev_attr_max_microvolts, + &dev_attr_min_microamps, + &dev_attr_max_microamps, + &dev_attr_mode, +}; + +static int regulator_virtual_consumer_probe(struct platform_device *pdev) +{ + char *reg_id = pdev->dev.platform_data; + struct virtual_consumer_data *drvdata; + int ret, i; + + drvdata = kzalloc(sizeof(struct virtual_consumer_data), GFP_KERNEL); + if (drvdata == NULL) { + ret = -ENOMEM; + goto err; + } + + mutex_init(&drvdata->lock); + + drvdata->regulator = regulator_get(&pdev->dev, reg_id); + if (IS_ERR(drvdata->regulator)) { + ret = PTR_ERR(drvdata->regulator); + goto err; + } + + for (i = 0; i < ARRAY_SIZE(attributes); i++) { + ret = device_create_file(&pdev->dev, attributes[i]); + if (ret != 0) + goto err; + } + + drvdata->mode = regulator_get_mode(drvdata->regulator); + + platform_set_drvdata(pdev, drvdata); + + return 0; + +err: + for (i = 0; i < ARRAY_SIZE(attributes); i++) + device_remove_file(&pdev->dev, attributes[i]); + kfree(drvdata); + return ret; +} + +static int regulator_virtual_consumer_remove(struct platform_device *pdev) +{ + struct virtual_consumer_data *drvdata = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < ARRAY_SIZE(attributes); i++) + device_remove_file(&pdev->dev, attributes[i]); + if (drvdata->enabled) + regulator_disable(drvdata->regulator); + regulator_put(drvdata->regulator); + + kfree(drvdata); + + return 0; +} + +static struct platform_driver regulator_virtual_consumer_driver = { + .probe = regulator_virtual_consumer_probe, + .remove = regulator_virtual_consumer_remove, + .driver = { + .name = "reg-virt-consumer", + }, +}; + + +static int __init regulator_virtual_consumer_init(void) +{ + return platform_driver_register(®ulator_virtual_consumer_driver); +} +module_init(regulator_virtual_consumer_init); + +static void __exit regulator_virtual_consumer_exit(void) +{ + platform_driver_unregister(®ulator_virtual_consumer_driver); +} +module_exit(regulator_virtual_consumer_exit); + +MODULE_AUTHOR("Mark Brown "); +MODULE_DESCRIPTION("Virtual regulator consumer"); +MODULE_LICENSE("GPL"); -- GitLab From ba7e4763437561763b6cca14a41f1d2a7def23e2 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Wed, 30 Apr 2008 17:13:42 +0100 Subject: [PATCH 0309/1024] regulator: core kbuild files This patch adds kernel build support for the regulator core. Signed-off-by: Philipp Zabel Signed-off-by: Liam Girdwood --- arch/arm/Kconfig | 2 ++ drivers/Makefile | 1 + drivers/regulator/Kconfig | 49 ++++++++++++++++++++++++++++++++++++++ drivers/regulator/Makefile | 10 ++++++++ 4 files changed, 62 insertions(+) create mode 100644 drivers/regulator/Kconfig create mode 100644 drivers/regulator/Makefile diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 257033c691f..4b8acd2851f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1225,6 +1225,8 @@ source "drivers/dma/Kconfig" source "drivers/dca/Kconfig" +source "drivers/regulator/Kconfig" + source "drivers/uio/Kconfig" endmenu diff --git a/drivers/Makefile b/drivers/Makefile index 54ec5e718c0..a280ab3d083 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -97,3 +97,4 @@ obj-$(CONFIG_PPC_PS3) += ps3/ obj-$(CONFIG_OF) += of/ obj-$(CONFIG_SSB) += ssb/ obj-$(CONFIG_VIRTIO) += virtio/ +obj-$(CONFIG_REGULATOR) += regulator/ diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig new file mode 100644 index 00000000000..84f89ecce69 --- /dev/null +++ b/drivers/regulator/Kconfig @@ -0,0 +1,49 @@ +menu "Voltage and Current regulators" + +config REGULATOR + bool "Voltage and Current Regulator Support" + default n + help + Generic Voltage and Current Regulator support. + + This framework is designed to provide a generic interface to voltage + and current regulators within the Linux kernel. It's intended to + provide voltage and current control to client or consumer drivers and + also provide status information to user space applications through a + sysfs interface. + + The intention is to allow systems to dynamically control regulator + output in order to save power and prolong battery life. This applies + to both voltage regulators (where voltage output is controllable) and + current sinks (where current output is controllable). + + This framework safely compiles out if not selected so that client + drivers can still be used in systems with no software controllable + regulators. + + If unsure, say no. + +config REGULATOR_DEBUG + bool "Regulator debug support" + depends on REGULATOR + help + Say yes here to enable debugging support. + +config REGULATOR_FIXED_VOLTAGE + tristate + default n + select REGULATOR + +config REGULATOR_VIRTUAL_CONSUMER + tristate "Virtual regulator consumer support" + default n + select REGULATOR + help + This driver provides a virtual consumer for the voltage and + current regulator API which provides sysfs controls for + configuring the supplies requested. This is mainly useful + for test purposes. + + If unsure, say no. + +endmenu diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile new file mode 100644 index 00000000000..29528b78c8d --- /dev/null +++ b/drivers/regulator/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for regulator drivers. +# + + +obj-$(CONFIG_REGULATOR) += core.o +obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o +obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o + +ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG -- GitLab From 8e6f0848be83c5c406ed73a6d7b4bfbf87880eec Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Wed, 30 Apr 2008 17:16:51 +0100 Subject: [PATCH 0310/1024] regulator: documentation - overview This adds overview documentation describing the regulator framework and nomenclature used in the interface specific documentation and code. Signed-off-by: Liam Girdwood --- Documentation/power/regulator/overview.txt | 171 +++++++++++++++++++++ 1 file changed, 171 insertions(+) create mode 100644 Documentation/power/regulator/overview.txt diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt new file mode 100644 index 00000000000..bdcb332bd7f --- /dev/null +++ b/Documentation/power/regulator/overview.txt @@ -0,0 +1,171 @@ +Linux voltage and current regulator framework +============================================= + +About +===== + +This framework is designed to provide a standard kernel interface to control +voltage and current regulators. + +The intention is to allow systems to dynamically control regulator power output +in order to save power and prolong battery life. This applies to both voltage +regulators (where voltage output is controllable) and current sinks (where +current limit is controllable). + +(C) 2008 Wolfson Microelectronics PLC. +Author: Liam Girdwood + + +Nomenclature +============ + +Some terms used in this document:- + + o Regulator - Electronic device that supplies power to other devices. + Most regulators can enable and disable their output whilst + some can control their output voltage and or current. + + Input Voltage -> Regulator -> Output Voltage + + + o PMIC - Power Management IC. An IC that contains numerous regulators + and often contains other susbsystems. + + + o Consumer - Electronic device that is supplied power by a regulator. + Consumers can be classified into two types:- + + Static: consumer does not change it's supply voltage or + current limit. It only needs to enable or disable it's + power supply. It's supply voltage is set by the hardware, + bootloader, firmware or kernel board initialisation code. + + Dynamic: consumer needs to change it's supply voltage or + current limit to meet operation demands. + + + o Power Domain - Electronic circuit that is supplied it's input power by the + output power of a regulator, switch or by another power + domain. + + The supply regulator may be behind a switch(s). i.e. + + Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A] + | | + | +-> [Consumer B], [Consumer C] + | + +-> [Consumer D], [Consumer E] + + That is one regulator and three power domains: + + Domain 1: Switch-1, Consumers D & E. + Domain 2: Switch-2, Consumers B & C. + Domain 3: Consumer A. + + and this represents a "supplies" relationship: + + Domain-1 --> Domain-2 --> Domain-3. + + A power domain may have regulators that are supplied power + by other regulators. i.e. + + Regulator-1 -+-> Regulator-2 -+-> [Consumer A] + | + +-> [Consumer B] + + This gives us two regulators and two power domains: + + Domain 1: Regulator-2, Consumer B. + Domain 2: Consumer A. + + and a "supplies" relationship: + + Domain-1 --> Domain-2 + + + o Constraints - Constraints are used to define power levels for performance + and hardware protection. Constraints exist at three levels: + + Regulator Level: This is defined by the regulator hardware + operating parameters and is specified in the regulator + datasheet. i.e. + + - voltage output is in the range 800mV -> 3500mV. + - regulator current output limit is 20mA @ 5V but is + 10mA @ 10V. + + Power Domain Level: This is defined in software by kernel + level board initialisation code. It is used to constrain a + power domain to a particular power range. i.e. + + - Domain-1 voltage is 3300mV + - Domain-2 voltage is 1400mV -> 1600mV + - Domain-3 current limit is 0mA -> 20mA. + + Consumer Level: This is defined by consumer drivers + dynamically setting voltage or current limit levels. + + e.g. a consumer backlight driver asks for a current increase + from 5mA to 10mA to increase LCD illumination. This passes + to through the levels as follows :- + + Consumer: need to increase LCD brightness. Lookup and + request next current mA value in brightness table (the + consumer driver could be used on several different + personalities based upon the same reference device). + + Power Domain: is the new current limit within the domain + operating limits for this domain and system state (e.g. + battery power, USB power) + + Regulator Domains: is the new current limit within the + regulator operating parameters for input/ouput voltage. + + If the regulator request passes all the constraint tests + then the new regulator value is applied. + + +Design +====== + +The framework is designed and targeted at SoC based devices but may also be +relevant to non SoC devices and is split into the following four interfaces:- + + + 1. Consumer driver interface. + + This uses a similar API to the kernel clock interface in that consumer + drivers can get and put a regulator (like they can with clocks atm) and + get/set voltage, current limit, mode, enable and disable. This should + allow consumers complete control over their supply voltage and current + limit. This also compiles out if not in use so drivers can be reused in + systems with no regulator based power control. + + See Documentation/power/regulator/consumer.txt + + 2. Regulator driver interface. + + This allows regulator drivers to register their regulators and provide + operations to the core. It also has a notifier call chain for propagating + regulator events to clients. + + See Documentation/power/regulator/regulator.txt + + 3. Machine interface. + + This interface is for machine specific code and allows the creation of + voltage/current domains (with constraints) for each regulator. It can + provide regulator constraints that will prevent device damage through + overvoltage or over current caused by buggy client drivers. It also + allows the creation of a regulator tree whereby some regulators are + supplied by others (similar to a clock tree). + + See Documentation/power/regulator/machine.txt + + 4. Userspace ABI. + + The framework also exports a lot of useful voltage/current/opmode data to + userspace via sysfs. This could be used to help monitor device power + consumption and status. + + See Documentation/ABI/testing/regulator-sysfs.txt -- GitLab From 6392776d262fcd290616ff5e4246ee95b22c13f0 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Wed, 30 Apr 2008 17:19:02 +0100 Subject: [PATCH 0311/1024] regulator: documentation - consumer interface This adds documentation describing the consumer device interface. Signed-off-by: Liam Girdwood --- Documentation/power/regulator/consumer.txt | 182 +++++++++++++++++++++ 1 file changed, 182 insertions(+) create mode 100644 Documentation/power/regulator/consumer.txt diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt new file mode 100644 index 00000000000..82b7a43aadb --- /dev/null +++ b/Documentation/power/regulator/consumer.txt @@ -0,0 +1,182 @@ +Regulator Consumer Driver Interface +=================================== + +This text describes the regulator interface for consumer device drivers. +Please see overview.txt for a description of the terms used in this text. + + +1. Consumer Regulator Access (static & dynamic drivers) +======================================================= + +A consumer driver can get access to it's supply regulator by calling :- + +regulator = regulator_get(dev, "Vcc"); + +The consumer passes in it's struct device pointer and power supply ID. The core +then finds the correct regulator by consulting a machine specific lookup table. +If the lookup is successful then this call will return a pointer to the struct +regulator that supplies this consumer. + +To release the regulator the consumer driver should call :- + +regulator_put(regulator); + +Consumers can be supplied by more than one regulator e.g. codec consumer with +analog and digital supplies :- + +digital = regulator_get(dev, "Vcc"); /* digital core */ +analog = regulator_get(dev, "Avdd"); /* analog */ + +The regulator access functions regulator_get() and regulator_put() will +usually be called in your device drivers probe() and remove() respectively. + + +2. Regulator Output Enable & Disable (static & dynamic drivers) +==================================================================== + +A consumer can enable it's power supply by calling:- + +int regulator_enable(regulator); + +NOTE: The supply may already be enabled before regulator_enabled() is called. +This may happen if the consumer shares the regulator or the regulator has been +previously enabled by bootloader or kernel board initialization code. + +A consumer can determine if a regulator is enabled by calling :- + +int regulator_is_enabled(regulator); + +This will return > zero when the regulator is enabled. + + +A consumer can disable it's supply when no longer needed by calling :- + +int regulator_disable(regulator); + +NOTE: This may not disable the supply if it's shared with other consumers. The +regulator will only be disabled when the enabled reference count is zero. + +Finally, a regulator can be forcefully disabled in the case of an emergency :- + +int regulator_force_disable(regulator); + +NOTE: this will immediately and forcefully shutdown the regulator output. All +consumers will be powered off. + + +3. Regulator Voltage Control & Status (dynamic drivers) +====================================================== + +Some consumer drivers need to be able to dynamically change their supply +voltage to match system operating points. e.g. CPUfreq drivers can scale +voltage along with frequency to save power, SD drivers may need to select the +correct card voltage, etc. + +Consumers can control their supply voltage by calling :- + +int regulator_set_voltage(regulator, min_uV, max_uV); + +Where min_uV and max_uV are the minimum and maximum acceptable voltages in +microvolts. + +NOTE: this can be called when the regulator is enabled or disabled. If called +when enabled, then the voltage changes instantly, otherwise the voltage +configuration changes and the voltage is physically set when the regulator is +next enabled. + +The regulators configured voltage output can be found by calling :- + +int regulator_get_voltage(regulator); + +NOTE: get_voltage() will return the configured output voltage whether the +regulator is enabled or disabled and should NOT be used to determine regulator +output state. However this can be used in conjunction with is_enabled() to +determine the regulator physical output voltage. + + +4. Regulator Current Limit Control & Status (dynamic drivers) +=========================================================== + +Some consumer drivers need to be able to dynamically change their supply +current limit to match system operating points. e.g. LCD backlight driver can +change the current limit to vary the backlight brightness, USB drivers may want +to set the limit to 500mA when supplying power. + +Consumers can control their supply current limit by calling :- + +int regulator_set_current_limit(regulator, min_uV, max_uV); + +Where min_uA and max_uA are the minimum and maximum acceptable current limit in +microamps. + +NOTE: this can be called when the regulator is enabled or disabled. If called +when enabled, then the current limit changes instantly, otherwise the current +limit configuration changes and the current limit is physically set when the +regulator is next enabled. + +A regulators current limit can be found by calling :- + +int regulator_get_current_limit(regulator); + +NOTE: get_current_limit() will return the current limit whether the regulator +is enabled or disabled and should not be used to determine regulator current +load. + + +5. Regulator Operating Mode Control & Status (dynamic drivers) +============================================================= + +Some consumers can further save system power by changing the operating mode of +their supply regulator to be more efficient when the consumers operating state +changes. e.g. consumer driver is idle and subsequently draws less current + +Regulator operating mode can be changed indirectly or directly. + +Indirect operating mode control. +-------------------------------- +Consumer drivers can request a change in their supply regulator operating mode +by calling :- + +int regulator_set_optimum_mode(struct regulator *regulator, int load_uA); + +This will cause the core to recalculate the total load on the regulator (based +on all it's consumers) and change operating mode (if necessary and permitted) +to best match the current operating load. + +The load_uA value can be determined from the consumers datasheet. e.g.most +datasheets have tables showing the max current consumed in certain situations. + +Most consumers will use indirect operating mode control since they have no +knowledge of the regulator or whether the regulator is shared with other +consumers. + +Direct operating mode control. +------------------------------ +Bespoke or tightly coupled drivers may want to directly control regulator +operating mode depending on their operating point. This can be achieved by +calling :- + +int regulator_set_mode(struct regulator *regulator, unsigned int mode); +unsigned int regulator_get_mode(struct regulator *regulator); + +Direct mode will only be used by consumers that *know* about the regulator and +are not sharing the regulator with other consumers. + + +6. Regulator Events +=================== +Regulators can notify consumers of external events. Events could be received by +consumers under regulator stress or failure conditions. + +Consumers can register interest in regulator events by calling :- + +int regulator_register_notifier(struct regulator *regulator, + struct notifier_block *nb); + +Consumers can uregister interest by calling :- + +int regulator_unregister_notifier(struct regulator *regulator, + struct notifier_block *nb); + +Regulators use the kernel notifier framework to send event to thier interested +consumers. -- GitLab From e8695ebe5568921c41c269f4434e17590735865c Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Wed, 30 Apr 2008 17:20:11 +0100 Subject: [PATCH 0312/1024] regulator: documentation - regulator driver This adds documentation describing the regulator driver interface. Signed-off-by: Liam Girdwood --- Documentation/power/regulator/regulator.txt | 30 +++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/power/regulator/regulator.txt diff --git a/Documentation/power/regulator/regulator.txt b/Documentation/power/regulator/regulator.txt new file mode 100644 index 00000000000..a6905014359 --- /dev/null +++ b/Documentation/power/regulator/regulator.txt @@ -0,0 +1,30 @@ +Regulator Driver Interface +========================== + +The regulator driver interface is relatively simple and designed to allow +regulator drivers to register their services with the core framework. + + +Registration +============ + +Drivers can register a regulator by calling :- + +struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, + void *reg_data); + +This will register the regulators capabilities and operations the regulator +core. The core does not touch reg_data (private to regulator driver). + +Regulators can be unregistered by calling :- + +void regulator_unregister(struct regulator_dev *rdev); + + +Regulator Events +================ +Regulators can send events (e.g. over temp, under voltage, etc) to consumer +drivers by calling :- + +int regulator_notifier_call_chain(struct regulator_dev *rdev, + unsigned long event, void *data); -- GitLab From e7d0fe340557b202dc00135ab3cc877db794a01f Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Wed, 30 Apr 2008 17:22:50 +0100 Subject: [PATCH 0313/1024] regulator: documentation - machine This adds documenation describing the regulator machine interface. Signed-off-by: Liam Girdwood --- Documentation/power/regulator/machine.txt | 101 ++++++++++++++++++++++ 1 file changed, 101 insertions(+) create mode 100644 Documentation/power/regulator/machine.txt diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt new file mode 100644 index 00000000000..c9a35665cf7 --- /dev/null +++ b/Documentation/power/regulator/machine.txt @@ -0,0 +1,101 @@ +Regulator Machine Driver Interface +=================================== + +The regulator machine driver interface is intended for board/machine specific +initialisation code to configure the regulator subsystem. Typical things that +machine drivers would do are :- + + 1. Regulator -> Device mapping. + 2. Regulator supply configuration. + 3. Power Domain constraint setting. + + + +1. Regulator -> device mapping +============================== +Consider the following machine :- + + Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] + | + +-> [Consumer B @ 3.3V] + +The drivers for consumers A & B must be mapped to the correct regulator in +order to control their power supply. This mapping can be achieved in machine +initialisation code by calling :- + +int regulator_set_device_supply(const char *regulator, struct device *dev, + const char *supply); + +and is shown with the following code :- + +regulator_set_device_supply("Regulator-1", devB, "Vcc"); +regulator_set_device_supply("Regulator-2", devA, "Vcc"); + +This maps Regulator-1 to the 'Vcc' supply for Consumer B and maps Regulator-2 +to the 'Vcc' supply for Consumer A. + + +2. Regulator supply configuration. +================================== +Consider the following machine (again) :- + + Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] + | + +-> [Consumer B @ 3.3V] + +Regulator-1 supplies power to Regulator-2. This relationship must be registered +with the core so that Regulator-1 is also enabled when Consumer A enables it's +supply (Regulator-2). + +This relationship can be register with the core via :- + +int regulator_set_supply(const char *regulator, const char *regulator_supply); + +In this example we would use the following code :- + +regulator_set_supply("Regulator-2", "Regulator-1"); + +Relationships can be queried by calling :- + +const char *regulator_get_supply(const char *regulator); + + +3. Power Domain constraint setting. +=================================== +Each power domain within a system has physical constraints on voltage and +current. This must be defined in software so that the power domain is always +operated within specifications. + +Consider the following machine (again) :- + + Regulator-1 -+-> Regulator-2 --> [Consumer A @ 1.8 - 2.0V] + | + +-> [Consumer B @ 3.3V] + +This gives us two regulators and two power domains: + + Domain 1: Regulator-2, Consumer B. + Domain 2: Consumer A. + +Constraints can be registered by calling :- + +int regulator_set_platform_constraints(const char *regulator, + struct regulation_constraints *constraints); + +The example is defined as follows :- + +struct regulation_constraints domain_1 = { + .min_uV = 3300000, + .max_uV = 3300000, + .valid_modes_mask = REGULATOR_MODE_NORMAL, +}; + +struct regulation_constraints domain_2 = { + .min_uV = 1800000, + .max_uV = 2000000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = REGULATOR_MODE_NORMAL, +}; + +regulator_set_platform_constraints("Regulator-1", &domain_1); +regulator_set_platform_constraints("Regulator-2", &domain_2); -- GitLab From e941d0ce532daf8d8610b2495c06f787fd587b85 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Wed, 30 Apr 2008 17:23:59 +0100 Subject: [PATCH 0314/1024] regulator: documentation - ABI This adds documentation describing the sysfs ABI used by the regulator framework. Signed-off-by: Liam Girdwood --- .../ABI/testing/sysfs-class-regulator | 315 ++++++++++++++++++ 1 file changed, 315 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-class-regulator diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator new file mode 100644 index 00000000000..79a4a75b2d2 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -0,0 +1,315 @@ +What: /sys/class/regulator/.../state +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + state. This holds the regulator output state. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'unknown' + + 'enabled' means the regulator output is ON and is supplying + power to the system. + + 'disabled' means the regulator output is OFF and is not + supplying power to the system.. + + 'unknown' means software cannot determine the state. + + NOTE: this field can be used in conjunction with microvolts + and microamps to determine regulator output levels. + + +What: /sys/class/regulator/.../type +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + type. This holds the regulator type. + + This will be one of the following strings: + + 'voltage' + 'current' + 'unknown' + + 'voltage' means the regulator output voltage can be controlled + by software. + + 'current' means the regulator output current limit can be + controlled by software. + + 'unknown' means software cannot control either voltage or + current limit. + + +What: /sys/class/regulator/.../microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + microvolts. This holds the regulator output voltage setting + measured in microvolts (i.e. E-6 Volts). + + NOTE: This value should not be used to determine the regulator + output voltage level as this value is the same regardless of + whether the regulator is enabled or disabled. + + +What: /sys/class/regulator/.../microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + microamps. This holds the regulator output current limit + setting measured in microamps (i.e. E-6 Amps). + + NOTE: This value should not be used to determine the regulator + output current level as this value is the same regardless of + whether the regulator is enabled or disabled. + + +What: /sys/class/regulator/.../opmode +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + opmode. This holds the regulator operating mode setting. + + The opmode value can be one of the following strings: + + 'fast' + 'normal' + 'idle' + 'standby' + 'unknown' + + The modes are described in include/linux/regulator/regulator.h + + NOTE: This value should not be used to determine the regulator + output operating mode as this value is the same regardless of + whether the regulator is enabled or disabled. + + +What: /sys/class/regulator/.../min_microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + min_microvolts. This holds the minimum safe working regulator + output voltage setting for this domain measured in microvolts. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no min microvolts constraint defined by + platform code. + + +What: /sys/class/regulator/.../max_microvolts +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + max_microvolts. This holds the maximum safe working regulator + output voltage setting for this domain measured in microvolts. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no max microvolts constraint defined by + platform code. + + +What: /sys/class/regulator/.../min_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + min_microamps. This holds the minimum safe working regulator + output current limit setting for this domain measured in + microamps. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no min microamps constraint defined by + platform code. + + +What: /sys/class/regulator/.../max_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + max_microamps. This holds the maximum safe working regulator + output current limit setting for this domain measured in + microamps. + + NOTE: this will return the string 'constraint not defined' if + the power domain has no max microamps constraint defined by + platform code. + + +What: /sys/class/regulator/.../num_users +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + num_users. This holds the number of consumer devices that + have called regulator_enable() on this regulator. + + +What: /sys/class/regulator/.../requested_microamps +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + requested_microamps. This holds the total requested load + current in microamps for this regulator from all its consumer + devices. + + +What: /sys/class/regulator/.../parent +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Some regulator directories will contain a link called parent. + This points to the parent or supply regulator if one exists. + +What: /sys/class/regulator/.../suspend_mem_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_mem_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to memory. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to memory voltage defined by + platform code. + +What: /sys/class/regulator/.../suspend_disk_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_disk_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to disk. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to disk voltage defined by + platform code. + +What: /sys/class/regulator/.../suspend_standby_microvolts +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_standby_microvolts. This holds the regulator output + voltage setting for this domain measured in microvolts when + the system is suspended to standby. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to standby voltage defined by + platform code. + +What: /sys/class/regulator/.../suspend_mem_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_mem_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to + memory. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to memory mode defined by + platform code. + +What: /sys/class/regulator/.../suspend_disk_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_disk_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to disk. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to disk mode defined by + platform code. + +What: /sys/class/regulator/.../suspend_standby_mode +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_standby_mode. This holds the regulator operating mode + setting for this domain when the system is suspended to + standby. + + NOTE: this will return the string 'not defined' if + the power domain has no suspend to standby mode defined by + platform code. + +What: /sys/class/regulator/.../suspend_mem_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_mem_state. This holds the regulator operating state + when suspended to memory. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'not defined' + +What: /sys/class/regulator/.../suspend_disk_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_disk_state. This holds the regulator operating state + when suspended to disk. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'not defined' + +What: /sys/class/regulator/.../suspend_standby_state +Date: May 2008 +KernelVersion: 2.6.26 +Contact: Liam Girdwood +Description: + Each regulator directory will contain a field called + suspend_standby_state. This holds the regulator operating + state when suspended to standby. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'not defined' -- GitLab From e53e86c7ae123b11c269b0835c04e1b42ca4baed Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Thu, 10 Jul 2008 15:48:00 +0100 Subject: [PATCH 0315/1024] regulator: maintainers - add maintainers for regulator framework. Adds Liam Girdwood and Mark Brown as regulator framework maintainers. Signed-off-by: Liam Girdwood --- MAINTAINERS | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index deedc0d827b..42e7ed920fe 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4504,6 +4504,15 @@ M: kaber@trash.net L: netdev@vger.kernel.org S: Maintained +VOLTAGE AND CURRENT REGULATOR FRAMEWORK +P: Liam Girdwood +M: lg@opensource.wolfsonmicro.com +P: Mark Brown +M: broonie@opensource.wolfsonmicro.com +W: http://opensource.wolfsonmicro.com/node/15 +T: git kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git +S: Supported + VT1211 HARDWARE MONITOR DRIVER P: Juerg Haefliger M: juergh@gmail.com -- GitLab From 0eb5d5ab3ec99bfd22ff16797d95835369ffb25b Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 11 Jul 2008 17:28:06 +0200 Subject: [PATCH 0316/1024] regulator: TI bq24022 Li-Ion Charger driver This adds a regulator driver for the TI bq24022 Single-Chip Li-Ion Charger with its nCE and ISET2 pins connected to GPIOs. Signed-off-by: Philipp Zabel Signed-off-by: Liam Girdwood --- drivers/regulator/Kconfig | 10 ++ drivers/regulator/Makefile | 2 + drivers/regulator/bq24022.c | 167 ++++++++++++++++++++++++++++++ include/linux/regulator/bq24022.h | 21 ++++ 4 files changed, 200 insertions(+) create mode 100644 drivers/regulator/bq24022.c create mode 100644 include/linux/regulator/bq24022.h diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 84f89ecce69..a656128f1fd 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -46,4 +46,14 @@ config REGULATOR_VIRTUAL_CONSUMER If unsure, say no. +config REGULATOR_BQ24022 + tristate "TI bq24022 Dual Input 1-Cell Li-Ion Charger IC" + default n + select REGULATOR + help + This driver controls a TI bq24022 Charger attached via + GPIOs. The provided current regulator can enable/disable + charging select between 100 mA and 500 mA charging current + limit. + endmenu diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 29528b78c8d..ac2c64efe65 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -7,4 +7,6 @@ obj-$(CONFIG_REGULATOR) += core.o obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o +obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o + ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c new file mode 100644 index 00000000000..263699d6152 --- /dev/null +++ b/drivers/regulator/bq24022.c @@ -0,0 +1,167 @@ +/* + * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater) + * 1-Cell Li-Ion Charger connected via GPIOs. + * + * Copyright (c) 2008 Philipp Zabel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +static int bq24022_set_current_limit(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + struct platform_device *pdev = rdev_get_drvdata(rdev); + struct bq24022_mach_info *pdata = pdev->dev.platform_data; + + dev_dbg(&pdev->dev, "setting current limit to %s mA\n", + max_uA >= 500000 ? "500" : "100"); + + /* REVISIT: maybe return error if min_uA != 0 ? */ + gpio_set_value(pdata->gpio_iset2, max_uA >= 500000); + return 0; +} + +static int bq24022_get_current_limit(struct regulator_dev *rdev) +{ + struct platform_device *pdev = rdev_get_drvdata(rdev); + struct bq24022_mach_info *pdata = pdev->dev.platform_data; + + return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000; +} + +static int bq24022_enable(struct regulator_dev *rdev) +{ + struct platform_device *pdev = rdev_get_drvdata(rdev); + struct bq24022_mach_info *pdata = pdev->dev.platform_data; + + dev_dbg(&pdev->dev, "enabling charger\n"); + + gpio_set_value(pdata->gpio_nce, 0); + return 0; +} + +static int bq24022_disable(struct regulator_dev *rdev) +{ + struct platform_device *pdev = rdev_get_drvdata(rdev); + struct bq24022_mach_info *pdata = pdev->dev.platform_data; + + dev_dbg(&pdev->dev, "disabling charger\n"); + + gpio_set_value(pdata->gpio_nce, 1); + return 0; +} + +static int bq24022_is_enabled(struct regulator_dev *rdev) +{ + struct platform_device *pdev = rdev_get_drvdata(rdev); + struct bq24022_mach_info *pdata = pdev->dev.platform_data; + + return !gpio_get_value(pdata->gpio_nce); +} + +static struct regulator_ops bq24022_ops = { + .set_current_limit = bq24022_set_current_limit, + .get_current_limit = bq24022_get_current_limit, + .enable = bq24022_enable, + .disable = bq24022_disable, + .is_enabled = bq24022_is_enabled, +}; + +static struct regulator_desc bq24022_desc = { + .name = "bq24022", + .ops = &bq24022_ops, + .type = REGULATOR_CURRENT, +}; + +static int __init bq24022_probe(struct platform_device *pdev) +{ + struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct regulator_dev *bq24022; + int ret; + + if (!pdata || !pdata->gpio_nce || !pdata->gpio_iset2) + return -EINVAL; + + ret = gpio_request(pdata->gpio_nce, "ncharge_en"); + if (ret) { + dev_dbg(&pdev->dev, "couldn't request nCE GPIO: %d\n", + pdata->gpio_nce); + goto err_ce; + } + ret = gpio_request(pdata->gpio_iset2, "charge_mode"); + if (ret) { + dev_dbg(&pdev->dev, "couldn't request ISET2 GPIO: %d\n", + pdata->gpio_iset2); + goto err_iset2; + } + ret = gpio_direction_output(pdata->gpio_iset2, 0); + ret = gpio_direction_output(pdata->gpio_nce, 1); + + bq24022 = regulator_register(&bq24022_desc, pdev); + if (IS_ERR(bq24022)) { + dev_dbg(&pdev->dev, "couldn't register regulator\n"); + ret = PTR_ERR(bq24022); + goto err_reg; + } + platform_set_drvdata(pdev, bq24022); + dev_dbg(&pdev->dev, "registered regulator\n"); + + return 0; +err_reg: + gpio_free(pdata->gpio_iset2); +err_iset2: + gpio_free(pdata->gpio_nce); +err_ce: + return ret; +} + +static int __devexit bq24022_remove(struct platform_device *pdev) +{ + struct bq24022_mach_info *pdata = pdev->dev.platform_data; + struct regulator_dev *bq24022 = platform_get_drvdata(pdev); + + regulator_unregister(bq24022); + gpio_free(pdata->gpio_iset2); + gpio_free(pdata->gpio_nce); + + return 0; +} + +static struct platform_driver bq24022_driver = { + .driver = { + .name = "bq24022", + }, + .remove = __devexit_p(bq24022_remove), +}; + +static int __init bq24022_init(void) +{ + return platform_driver_probe(&bq24022_driver, bq24022_probe); +} + +static void __exit bq24022_exit(void) +{ + platform_driver_unregister(&bq24022_driver); +} + +/* + * make sure this is probed before gpio_vbus and pda_power, + * but after asic3 or other GPIO expander drivers. + */ +subsys_initcall(bq24022_init); +module_exit(bq24022_exit); + +MODULE_AUTHOR("Philipp Zabel"); +MODULE_DESCRIPTION("TI bq24022 Li-Ion Charger driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/regulator/bq24022.h b/include/linux/regulator/bq24022.h new file mode 100644 index 00000000000..e84b0a9feda --- /dev/null +++ b/include/linux/regulator/bq24022.h @@ -0,0 +1,21 @@ +/* + * Support for TI bq24022 (bqTINY-II) Dual Input (USB/AC Adpater) + * 1-Cell Li-Ion Charger connected via GPIOs. + * + * Copyright (c) 2008 Philipp Zabel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/** + * bq24022_mach_info - platform data for bq24022 + * @gpio_nce: GPIO line connected to the nCE pin, used to enable / disable charging + * @gpio_iset2: GPIO line connected to the ISET2 pin, used to limit charging current to 100 mA / 500 mA + */ +struct bq24022_mach_info { + int gpio_nce; + int gpio_iset2; +}; -- GitLab From 8d50b53d66a8a6ae41bafbdcabe401467803f33a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 30 Jul 2008 02:37:46 -0700 Subject: [PATCH 0317/1024] pkt_sched: Fix OOPS on ingress qdisc add. Bug report from Steven Jan Springl: Issuing the following command causes a kernel oops: tc qdisc add dev eth0 handle ffff: ingress The problem mostly stems from all of the special case handling of ingress qdiscs. So, to fix this, do the grafting operation the same way we do for TX qdiscs. Which means that dev_activate() and dev_deactivate() now do the "qdisc_sleeping <--> qdisc" transitions on dev->rx_queue too. Future simplifications are possible now, mainly because it is impossible for dev_queue->{qdisc,qdisc_sleeping} to be NULL. There are NULL checks all over to handle the ingress qdisc special case that used to exist before this commit. Signed-off-by: David S. Miller --- net/core/dev.c | 4 +-- net/sched/sch_api.c | 57 ++++++++++++----------------------------- net/sched/sch_generic.c | 8 +++--- 3 files changed, 23 insertions(+), 46 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 8d13a9b9f1d..63d6bcddbf4 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2100,7 +2100,7 @@ static int ing_filter(struct sk_buff *skb) rxq = &dev->rx_queue; q = rxq->qdisc; - if (q) { + if (q != &noop_qdisc) { spin_lock(qdisc_lock(q)); result = qdisc_enqueue_root(skb, q); spin_unlock(qdisc_lock(q)); @@ -2113,7 +2113,7 @@ static inline struct sk_buff *handle_ing(struct sk_buff *skb, struct packet_type **pt_prev, int *ret, struct net_device *orig_dev) { - if (!skb->dev->rx_queue.qdisc) + if (skb->dev->rx_queue.qdisc == &noop_qdisc) goto out; if (*pt_prev) { diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index b0601642e22..4840aff4725 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -572,44 +572,21 @@ static u32 qdisc_alloc_handle(struct net_device *dev) static struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue, struct Qdisc *qdisc) { + struct Qdisc *oqdisc = dev_queue->qdisc_sleeping; spinlock_t *root_lock; - struct Qdisc *oqdisc; - int ingress; - - ingress = 0; - if (qdisc && qdisc->flags&TCQ_F_INGRESS) - ingress = 1; - - if (ingress) { - oqdisc = dev_queue->qdisc; - } else { - oqdisc = dev_queue->qdisc_sleeping; - } root_lock = qdisc_root_lock(oqdisc); spin_lock_bh(root_lock); - if (ingress) { - /* Prune old scheduler */ - if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1) { - /* delete */ - qdisc_reset(oqdisc); - dev_queue->qdisc = NULL; - } else { /* new */ - dev_queue->qdisc = qdisc; - } + /* Prune old scheduler */ + if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1) + qdisc_reset(oqdisc); - } else { - /* Prune old scheduler */ - if (oqdisc && atomic_read(&oqdisc->refcnt) <= 1) - qdisc_reset(oqdisc); - - /* ... and graft new one */ - if (qdisc == NULL) - qdisc = &noop_qdisc; - dev_queue->qdisc_sleeping = qdisc; - dev_queue->qdisc = &noop_qdisc; - } + /* ... and graft new one */ + if (qdisc == NULL) + qdisc = &noop_qdisc; + dev_queue->qdisc_sleeping = qdisc; + dev_queue->qdisc = &noop_qdisc; spin_unlock_bh(root_lock); @@ -678,7 +655,8 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent, ingress = 0; num_q = dev->num_tx_queues; - if (q && q->flags & TCQ_F_INGRESS) { + if ((q && q->flags & TCQ_F_INGRESS) || + (new && new->flags & TCQ_F_INGRESS)) { num_q = 1; ingress = 1; } @@ -692,13 +670,10 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent, if (!ingress) dev_queue = netdev_get_tx_queue(dev, i); - if (ingress) { - old = dev_graft_qdisc(dev_queue, q); - } else { - old = dev_graft_qdisc(dev_queue, new); - if (new && i > 0) - atomic_inc(&new->refcnt); - } + old = dev_graft_qdisc(dev_queue, new); + if (new && i > 0) + atomic_inc(&new->refcnt); + notify_and_destroy(skb, n, classid, old, new); } @@ -817,7 +792,7 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue, goto err_out3; } } - if (parent) + if (parent && !(sch->flags & TCQ_F_INGRESS)) list_add_tail(&sch->list, &dev_queue->qdisc->list); return sch; diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index fd2a6cadb11..345838a2e36 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -596,7 +596,7 @@ static void transition_one_qdisc(struct net_device *dev, int *need_watchdog_p = _need_watchdog; rcu_assign_pointer(dev_queue->qdisc, new_qdisc); - if (new_qdisc != &noqueue_qdisc) + if (need_watchdog_p && new_qdisc != &noqueue_qdisc) *need_watchdog_p = 1; } @@ -619,6 +619,7 @@ void dev_activate(struct net_device *dev) need_watchdog = 0; netdev_for_each_tx_queue(dev, transition_one_qdisc, &need_watchdog); + transition_one_qdisc(dev, &dev->rx_queue, NULL); if (need_watchdog) { dev->trans_start = jiffies; @@ -677,6 +678,7 @@ void dev_deactivate(struct net_device *dev) bool running; netdev_for_each_tx_queue(dev, dev_deactivate_queue, &noop_qdisc); + dev_deactivate_queue(dev, &dev->rx_queue, &noop_qdisc); dev_watchdog_down(dev); @@ -718,7 +720,7 @@ static void dev_init_scheduler_queue(struct net_device *dev, void dev_init_scheduler(struct net_device *dev) { netdev_for_each_tx_queue(dev, dev_init_scheduler_queue, &noop_qdisc); - dev_init_scheduler_queue(dev, &dev->rx_queue, NULL); + dev_init_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc); setup_timer(&dev->watchdog_timer, dev_watchdog, (unsigned long)dev); } @@ -745,6 +747,6 @@ static void shutdown_scheduler_queue(struct net_device *dev, void dev_shutdown(struct net_device *dev) { netdev_for_each_tx_queue(dev, shutdown_scheduler_queue, &noop_qdisc); - shutdown_scheduler_queue(dev, &dev->rx_queue, NULL); + shutdown_scheduler_queue(dev, &dev->rx_queue, &noop_qdisc); WARN_ON(timer_pending(&dev->watchdog_timer)); } -- GitLab From 785957d3e8c6fb37b18bf671923a76dbd8240025 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 30 Jul 2008 03:03:15 -0700 Subject: [PATCH 0318/1024] tcp: MD5: Use MIB counter instead of warning for MD5 mismatch. From a report by Matti Aarnio, and preliminary patch by Adam Langley. Signed-off-by: David S. Miller --- include/linux/snmp.h | 2 ++ net/ipv4/proc.c | 2 ++ net/ipv4/tcp_ipv4.c | 10 ++-------- net/ipv6/tcp_ipv6.c | 27 ++++++++------------------- 4 files changed, 14 insertions(+), 27 deletions(-) diff --git a/include/linux/snmp.h b/include/linux/snmp.h index 5df62ef1280..7a6e6bba4a7 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -214,6 +214,8 @@ enum LINUX_MIB_TCPDSACKIGNOREDOLD, /* TCPSACKIgnoredOld */ LINUX_MIB_TCPDSACKIGNOREDNOUNDO, /* TCPSACKIgnoredNoUndo */ LINUX_MIB_TCPSPURIOUSRTOS, /* TCPSpuriousRTOs */ + LINUX_MIB_TCPMD5NOTFOUND, /* TCPMD5NotFound */ + LINUX_MIB_TCPMD5UNEXPECTED, /* TCPMD5Unexpected */ __LINUX_MIB_MAX }; diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c index 834356ea99d..8f5a403f6f6 100644 --- a/net/ipv4/proc.c +++ b/net/ipv4/proc.c @@ -232,6 +232,8 @@ static const struct snmp_mib snmp4_net_list[] = { SNMP_MIB_ITEM("TCPDSACKIgnoredOld", LINUX_MIB_TCPDSACKIGNOREDOLD), SNMP_MIB_ITEM("TCPDSACKIgnoredNoUndo", LINUX_MIB_TCPDSACKIGNOREDNOUNDO), SNMP_MIB_ITEM("TCPSpuriousRTOs", LINUX_MIB_TCPSPURIOUSRTOS), + SNMP_MIB_ITEM("TCPMD5NotFound", LINUX_MIB_TCPMD5NOTFOUND), + SNMP_MIB_ITEM("TCPMD5Unexpected", LINUX_MIB_TCPMD5UNEXPECTED), SNMP_MIB_SENTINEL }; diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index a2b06d0cc26..b3875c0d83c 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1116,18 +1116,12 @@ static int tcp_v4_inbound_md5_hash(struct sock *sk, struct sk_buff *skb) return 0; if (hash_expected && !hash_location) { - LIMIT_NETDEBUG(KERN_INFO "MD5 Hash expected but NOT found " - "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n", - NIPQUAD(iph->saddr), ntohs(th->source), - NIPQUAD(iph->daddr), ntohs(th->dest)); + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND); return 1; } if (!hash_expected && hash_location) { - LIMIT_NETDEBUG(KERN_INFO "MD5 Hash NOT expected but found " - "(" NIPQUAD_FMT ", %d)->(" NIPQUAD_FMT ", %d)\n", - NIPQUAD(iph->saddr), ntohs(th->source), - NIPQUAD(iph->daddr), ntohs(th->dest)); + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED); return 1; } diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index cff778b23a7..1db45216b23 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -849,28 +849,17 @@ static int tcp_v6_inbound_md5_hash (struct sock *sk, struct sk_buff *skb) hash_expected = tcp_v6_md5_do_lookup(sk, &ip6h->saddr); hash_location = tcp_parse_md5sig_option(th); - /* do we have a hash as expected? */ - if (!hash_expected) { - if (!hash_location) - return 0; - if (net_ratelimit()) { - printk(KERN_INFO "MD5 Hash NOT expected but found " - "(" NIP6_FMT ", %u)->" - "(" NIP6_FMT ", %u)\n", - NIP6(ip6h->saddr), ntohs(th->source), - NIP6(ip6h->daddr), ntohs(th->dest)); - } + /* We've parsed the options - do we have a hash? */ + if (!hash_expected && !hash_location) + return 0; + + if (hash_expected && !hash_location) { + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5NOTFOUND); return 1; } - if (!hash_location) { - if (net_ratelimit()) { - printk(KERN_INFO "MD5 Hash expected but NOT found " - "(" NIP6_FMT ", %u)->" - "(" NIP6_FMT ", %u)\n", - NIP6(ip6h->saddr), ntohs(th->source), - NIP6(ip6h->daddr), ntohs(th->dest)); - } + if (!hash_expected && hash_location) { + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPMD5UNEXPECTED); return 1; } -- GitLab From 17ef51fce03758736e9051c4360eca237dd0aaeb Mon Sep 17 00:00:00 2001 From: Daniel Lezcano Date: Wed, 30 Jul 2008 03:12:31 -0700 Subject: [PATCH 0319/1024] ipv6: Fix useless proc net sockstat6 removal This call is no longer needed, sockstat6 is per namespace so it is removed at the namespace subsystem destruction. Signed-off-by: Daniel Lezcano Signed-off-by: David S. Miller --- net/ipv6/proc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index f82f6074cf8..0179b66864f 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -286,7 +286,6 @@ proc_net_fail: void ipv6_misc_proc_exit(void) { - proc_net_remove(&init_net, "sockstat6"); proc_net_remove(&init_net, "dev_snmp6"); proc_net_remove(&init_net, "snmp6"); unregister_pernet_subsys(&ipv6_proc_ops); -- GitLab From 031cf19e6f63941506c9baf76ac7adac06edcf08 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Wed, 30 Jul 2008 03:14:01 -0700 Subject: [PATCH 0320/1024] net: Make "networking" one-click deselectable. Use a menuconfig directive to make all of networking support one-click deselectable from the top-level menu. Signed-off-by: Robert P. J. Day Signed-off-by: David S. Miller --- net/Kconfig | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/net/Kconfig b/net/Kconfig index b9866875174..7612cc8c337 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -2,9 +2,7 @@ # Network configuration # -menu "Networking" - -config NET +menuconfig NET bool "Networking support" ---help--- Unless you really know what you are doing, you should say Y here. @@ -22,7 +20,6 @@ config NET recommended to read the NET-HOWTO, available from . -# Make sure that all config symbols are dependent on NET if NET menu "Networking options" @@ -252,5 +249,3 @@ source "net/rfkill/Kconfig" source "net/9p/Kconfig" endif # if NET -endmenu # Networking - -- GitLab From 96d8b647cfff90c8ff07863866aacdcd9d13cead Mon Sep 17 00:00:00 2001 From: Alexey Korolev Date: Tue, 29 Jul 2008 13:54:11 +0100 Subject: [PATCH 0321/1024] [MTD] [NAND] fix subpage read for small page NAND Current implementation of subpage read feature for NAND has issues with small page devices. Small page NAND do not support RNDOUT command. So subpage feature is not applicable for them. This patch disables support of subpage for small page NAND. The code is verified on nandsim(SP NAND simulation) and on LP NAND devices. Thanks a lot to Artem for finding this issue. Signed-off-by: Alexey Korolev Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 83f678702df..81774e5facf 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -177,7 +177,9 @@ typedef enum { #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING)) #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK)) -#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT)) +/* Large page NAND with SOFT_ECC should support subpage reads */ +#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \ + && (chip->page_shift > 9)) /* Mask to zero out the chip options, which come from the id table */ #define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR) -- GitLab From 74216be41a61a809ad17b091068307e3d89f4a2f Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 30 Jul 2008 11:18:42 +0300 Subject: [PATCH 0322/1024] [MTD] [NAND] nandsim: support random page read command Commit 3d45955962496879dead8d4dd70bb9a23b07154b ("subpage read feature as a way to improve performance") broke nandsim because nandsim does not support the "random page read" NAND command. This patch adds corresponding support. Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nandsim.c | 57 ++++++++++++++++++++++++++------------ 1 file changed, 40 insertions(+), 17 deletions(-) diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index ecd70e2504f..7428a6c1135 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -207,13 +207,16 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I #define STATE_CMD_READID 0x0000000A /* read ID */ #define STATE_CMD_ERASE2 0x0000000B /* sector erase second command */ #define STATE_CMD_RESET 0x0000000C /* reset */ +#define STATE_CMD_RNDOUT 0x0000000D /* random output command */ +#define STATE_CMD_RNDOUTSTART 0x0000000E /* random output start command */ #define STATE_CMD_MASK 0x0000000F /* command states mask */ /* After an address is input, the simulator goes to one of these states */ #define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */ #define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */ -#define STATE_ADDR_ZERO 0x00000030 /* one byte zero address was accepted */ -#define STATE_ADDR_MASK 0x00000030 /* address states mask */ +#define STATE_ADDR_COLUMN 0x00000030 /* column address was accepted */ +#define STATE_ADDR_ZERO 0x00000040 /* one byte zero address was accepted */ +#define STATE_ADDR_MASK 0x00000070 /* address states mask */ /* Durind data input/output the simulator is in these states */ #define STATE_DATAIN 0x00000100 /* waiting for data input */ @@ -240,7 +243,7 @@ MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the I #define ACTION_OOBOFF 0x00600000 /* add to address OOB offset */ #define ACTION_MASK 0x00700000 /* action mask */ -#define NS_OPER_NUM 12 /* Number of operations supported by the simulator */ +#define NS_OPER_NUM 13 /* Number of operations supported by the simulator */ #define NS_OPER_STATES 6 /* Maximum number of states in operation */ #define OPT_ANY 0xFFFFFFFF /* any chip supports this operation */ @@ -373,7 +376,10 @@ static struct nandsim_operations { {OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}}, /* Large page devices read page */ {OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY, - STATE_DATAOUT, STATE_READY}} + STATE_DATAOUT, STATE_READY}}, + /* Large page devices random page read */ + {OPT_LARGEPAGE, {STATE_CMD_RNDOUT, STATE_ADDR_COLUMN, STATE_CMD_RNDOUTSTART | ACTION_CPY, + STATE_DATAOUT, STATE_READY}}, }; struct weak_block { @@ -937,12 +943,18 @@ static char *get_state_name(uint32_t state) return "STATE_CMD_ERASE2"; case STATE_CMD_RESET: return "STATE_CMD_RESET"; + case STATE_CMD_RNDOUT: + return "STATE_CMD_RNDOUT"; + case STATE_CMD_RNDOUTSTART: + return "STATE_CMD_RNDOUTSTART"; case STATE_ADDR_PAGE: return "STATE_ADDR_PAGE"; case STATE_ADDR_SEC: return "STATE_ADDR_SEC"; case STATE_ADDR_ZERO: return "STATE_ADDR_ZERO"; + case STATE_ADDR_COLUMN: + return "STATE_ADDR_COLUMN"; case STATE_DATAIN: return "STATE_DATAIN"; case STATE_DATAOUT: @@ -973,6 +985,7 @@ static int check_command(int cmd) switch (cmd) { case NAND_CMD_READ0: + case NAND_CMD_READ1: case NAND_CMD_READSTART: case NAND_CMD_PAGEPROG: case NAND_CMD_READOOB: @@ -982,7 +995,8 @@ static int check_command(int cmd) case NAND_CMD_READID: case NAND_CMD_ERASE2: case NAND_CMD_RESET: - case NAND_CMD_READ1: + case NAND_CMD_RNDOUT: + case NAND_CMD_RNDOUTSTART: return 0; case NAND_CMD_STATUS_MULTI: @@ -1021,6 +1035,10 @@ static uint32_t get_state_by_command(unsigned command) return STATE_CMD_ERASE2; case NAND_CMD_RESET: return STATE_CMD_RESET; + case NAND_CMD_RNDOUT: + return STATE_CMD_RNDOUT; + case NAND_CMD_RNDOUTSTART: + return STATE_CMD_RNDOUTSTART; } NS_ERR("get_state_by_command: unknown command, BUG\n"); @@ -1582,6 +1600,11 @@ static void switch_state(struct nandsim *ns) ns->regs.num = 1; break; + case STATE_ADDR_COLUMN: + /* Column address is always 2 bytes */ + ns->regs.num = ns->geom.pgaddrbytes - ns->geom.secaddrbytes; + break; + default: NS_ERR("switch_state: BUG! unknown address state\n"); } @@ -1693,15 +1716,21 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte) return; } - /* - * Chip might still be in STATE_DATAOUT - * (if OPT_AUTOINCR feature is supported), STATE_DATAOUT_STATUS or - * STATE_DATAOUT_STATUS_M state. If so, switch state. - */ + /* Check that the command byte is correct */ + if (check_command(byte)) { + NS_ERR("write_byte: unknown command %#x\n", (uint)byte); + return; + } + if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS || NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M - || ((ns->options & OPT_AUTOINCR) && NS_STATE(ns->state) == STATE_DATAOUT)) + || NS_STATE(ns->state) == STATE_DATAOUT) { + int row = ns->regs.row; + switch_state(ns); + if (byte == NAND_CMD_RNDOUT) + ns->regs.row = row; + } /* Check if chip is expecting command */ if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) { @@ -1715,12 +1744,6 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte) switch_to_ready_state(ns, NS_STATUS_FAILED(ns)); } - /* Check that the command byte is correct */ - if (check_command(byte)) { - NS_ERR("write_byte: unknown command %#x\n", (uint)byte); - return; - } - NS_DBG("command byte corresponding to %s state accepted\n", get_state_name(get_state_by_command(byte))); ns->regs.command = byte; -- GitLab From 650da9d0b7c401619c1df2953e975606b8d5dcbb Mon Sep 17 00:00:00 2001 From: "akpm@linux-foundation.org" Date: Tue, 29 Jul 2008 21:27:14 -0700 Subject: [PATCH 0323/1024] [MTD] [NAND] fsl_elbc_nand.c: fix printk warning drivers/mtd/nand/fsl_elbc_nand.c:890: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'resource_size_t' Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsl_elbc_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 9dff51351f4..98ad3cefcaf 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -887,7 +887,7 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl, goto err; } - priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", res.start); + priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", (unsigned)res.start); if (!priv->mtd.name) { ret = -ENOMEM; goto err; -- GitLab From 771999b65f79264acde4b855e5d35696eca5e80c Mon Sep 17 00:00:00 2001 From: "akpm@linux-foundation.org" Date: Tue, 29 Jul 2008 22:22:40 -0700 Subject: [PATCH 0324/1024] [MTD] DataFlash: bugfix, binary page sizes now handled The wrong version of the "teach dataflash about binary density" patch just got merged (v2 not v3) ... this restores the missing updates: * Fix the cmdlinepart *regression* that caused testing failures (!!) by restoring the original part labels in relevant cases. * Don't reference things that don't exist (!) - An opcode that doesn't even exist for DataFlash - The part is "at45db642" not "at45db641" - ID zero in this JEDEC table * Make the JEDEC probe routine report and handle errors better: - If the SPI calls fail, return the error codes. - Don't depend on ordering of table entries. - Unrecognized ids are different from parts that have no ID. We won't actually know how to handle them correctly; display the ID and ignore the chip. * Move the original block comment about the "legacy" chip ID scheme back next to the code to which it applies ... not next to the new JEDEC query code, which uses an entirely different strategy. * Don't print a guessed erasesize; /proc/mtd has the real value. And add a few more comments. Signed-off-by: David Brownell Cc: Bryan Wu Cc: Michael Hennerich Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/devices/mtd_dataflash.c | 130 ++++++++++++++++++---------- 1 file changed, 83 insertions(+), 47 deletions(-) diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 54e36bfc2c3..8bd0dea6885 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -15,6 +15,8 @@ #include #include #include +#include + #include #include @@ -487,9 +489,8 @@ add_dataflash(struct spi_device *spi, char *name, device->write = dataflash_write; device->priv = priv; - dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes, " - "erasesize %d bytes\n", name, device->size/1024, - pagesize, pagesize * 8); /* 8 pages = 1 block */ + dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes\n", + name, DIV_ROUND_UP(device->size, 1024), pagesize); dev_set_drvdata(&spi->dev, priv); if (mtd_has_partitions()) { @@ -518,65 +519,57 @@ add_dataflash(struct spi_device *spi, char *name, return add_mtd_device(device) == 1 ? -ENODEV : 0; } -/* - * Detect and initialize DataFlash device: - * - * Device Density ID code #Pages PageSize Offset - * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9 - * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1024 264 9 - * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9 - * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9 - * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10 - * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10 - * AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11 - * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11 - */ - struct flash_info { char *name; - /* JEDEC id zero means "no ID" (most older chips); otherwise it has - * a high byte of zero plus three data bytes: the manufacturer id, - * then a two byte device id. + /* JEDEC id has a high byte of zero plus three data bytes: + * the manufacturer id, then a two byte device id. */ uint32_t jedec_id; - /* The size listed here is what works with OPCODE_SE, which isn't - * necessarily called a "sector" by the vendor. - */ + /* The size listed here is what works with OP_ERASE_PAGE. */ unsigned nr_pages; uint16_t pagesize; uint16_t pageoffset; uint16_t flags; -#define SUP_POW2PS 0x02 -#define IS_POW2PS 0x01 +#define SUP_POW2PS 0x0002 /* supports 2^N byte pages */ +#define IS_POW2PS 0x0001 /* uses 2^N byte pages */ }; static struct flash_info __devinitdata dataflash_data [] = { - { "at45db011d", 0x1f2200, 512, 264, 9, SUP_POW2PS}, + /* + * NOTE: chips with SUP_POW2PS (rev D and up) need two entries, + * one with IS_POW2PS and the other without. The entry with the + * non-2^N byte page size can't name exact chip revisions without + * losing backwards compatibility for cmdlinepart. + * + * These newer chips also support 128-byte security registers (with + * 64 bytes one-time-programmable) and software write-protection. + */ + { "AT45DB011B", 0x1f2200, 512, 264, 9, SUP_POW2PS}, { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS}, - { "at45db021d", 0x1f2300, 1024, 264, 9, SUP_POW2PS}, + { "AT45DB021B", 0x1f2300, 1024, 264, 9, SUP_POW2PS}, { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS}, - { "at45db041d", 0x1f2400, 2048, 264, 9, SUP_POW2PS}, + { "AT45DB041x", 0x1f2400, 2048, 264, 9, SUP_POW2PS}, { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS}, - { "at45db081d", 0x1f2500, 4096, 264, 9, SUP_POW2PS}, + { "AT45DB081B", 0x1f2500, 4096, 264, 9, SUP_POW2PS}, { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS}, - { "at45db161d", 0x1f2600, 4096, 528, 10, SUP_POW2PS}, + { "AT45DB161x", 0x1f2600, 4096, 528, 10, SUP_POW2PS}, { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS}, - { "at45db321c", 0x1f2700, 8192, 528, 10, }, + { "AT45DB321x", 0x1f2700, 8192, 528, 10, 0}, /* rev C */ - { "at45db321d", 0x1f2701, 8192, 528, 10, SUP_POW2PS}, + { "AT45DB321x", 0x1f2701, 8192, 528, 10, SUP_POW2PS}, { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS}, - { "at45db641d", 0x1f2800, 8192, 1056, 11, SUP_POW2PS}, - { "at45db641d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, + { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS}, + { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, }; static struct flash_info *__devinit jedec_probe(struct spi_device *spi) @@ -588,17 +581,23 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi) struct flash_info *info; int status; - /* JEDEC also defines an optional "extended device information" * string for after vendor-specific data, after the three bytes * we use here. Supporting some chips might require using it. + * + * If the vendor ID isn't Atmel's (0x1f), assume this call failed. + * That's not an error; only rev C and newer chips handle it, and + * only Atmel sells these chips. */ tmp = spi_write_then_read(spi, &code, 1, id, 3); if (tmp < 0) { DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n", spi->dev.bus_id, tmp); - return NULL; + return ERR_PTR(tmp); } + if (id[0] != 0x1f) + return NULL; + jedec = id[0]; jedec = jedec << 8; jedec |= id[1]; @@ -609,19 +608,53 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi) tmp < ARRAY_SIZE(dataflash_data); tmp++, info++) { if (info->jedec_id == jedec) { + DEBUG(MTD_DEBUG_LEVEL1, "%s: OTP, sector protect%s\n", + dev_name(&spi->dev), + (info->flags & SUP_POW2PS) + ? ", binary pagesize" : "" + ); if (info->flags & SUP_POW2PS) { status = dataflash_status(spi); - if (status & 0x1) - /* return power of 2 pagesize */ - return ++info; - else - return info; + if (status < 0) { + DEBUG(MTD_DEBUG_LEVEL1, + "%s: status error %d\n", + dev_name(&spi->dev), status); + return ERR_PTR(status); + } + if (status & 0x1) { + if (info->flags & IS_POW2PS) + return info; + } else { + if (!(info->flags & IS_POW2PS)) + return info; + } } } } - return NULL; + + /* + * Treat other chips as errors ... we won't know the right page + * size (it might be binary) even when we can tell which density + * class is involved (legacy chip id scheme). + */ + dev_warn(&spi->dev, "JEDEC id %06x not handled\n", jedec); + return ERR_PTR(-ENODEV); } +/* + * Detect and initialize DataFlash device, using JEDEC IDs on newer chips + * or else the ID code embedded in the status bits: + * + * Device Density ID code #Pages PageSize Offset + * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9 + * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1024 264 9 + * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9 + * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9 + * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10 + * AT45DB0321B 32Mbit (4M) xx1101xx (0x34) 8192 528 10 + * AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11 + * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11 + */ static int __devinit dataflash_probe(struct spi_device *spi) { int status; @@ -632,14 +665,17 @@ static int __devinit dataflash_probe(struct spi_device *spi) * If it succeeds we know we have either a C or D part. * D will support power of 2 pagesize option. */ - info = jedec_probe(spi); - + if (IS_ERR(info)) + return PTR_ERR(info); if (info != NULL) return add_dataflash(spi, info->name, info->nr_pages, info->pagesize, info->pageoffset); - + /* + * Older chips support only legacy commands, identifing + * capacity using bits in the status byte. + */ status = dataflash_status(spi); if (status <= 0 || status == 0xff) { DEBUG(MTD_DEBUG_LEVEL1, "%s: status error %d\n", @@ -661,13 +697,13 @@ static int __devinit dataflash_probe(struct spi_device *spi) status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9); break; case 0x1c: /* 0 1 1 1 x x */ - status = add_dataflash(spi, "AT45DB041B", 2048, 264, 9); + status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9); break; case 0x24: /* 1 0 0 1 x x */ status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9); break; case 0x2c: /* 1 0 1 1 x x */ - status = add_dataflash(spi, "AT45DB161B", 4096, 528, 10); + status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10); break; case 0x34: /* 1 1 0 1 x x */ status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10); -- GitLab From 95b1bc20532c18e3f19cd460c8350350c84ffbb2 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 29 Jul 2008 22:28:12 -0700 Subject: [PATCH 0325/1024] [MTD] MTD_DEBUG always does compile-time typechecks The current style for debug messages is to ensure they're always parsed by the compiler and then subjected to dead code removal. That way builds won't break only when debug options get enabled, which is common when they are stripped out early by CPP. This patch makes CONFIG_MTD_DEBUG adopt that convention. Signed-off-by: David Brownell Signed-off-by: David Woodhouse --- include/linux/mtd/mtd.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 4ed40caff4e..92263654855 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -272,7 +272,11 @@ static inline void mtd_erase_callback(struct erase_info *instr) printk(KERN_INFO args); \ } while(0) #else /* CONFIG_MTD_DEBUG */ -#define DEBUG(n, args...) do { } while(0) +#define DEBUG(n, args...) \ + do { \ + if (0) \ + printk(KERN_INFO args); \ + } while(0) #endif /* CONFIG_MTD_DEBUG */ -- GitLab From e08198169ec5facb3d85bb455efa44a2f8327842 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 30 Jul 2008 07:21:46 -0700 Subject: [PATCH 0326/1024] IPoIB/cm: Set correct SG list in ipoib_cm_init_rx_wr() wr->sg_list should be set to the sge pointer passed in, not priv->cm.rx_sge. Reported-by: Hoang-Nam Nguyen Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 0f2d3045061..7ebc400a4b3 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -337,7 +337,7 @@ static void ipoib_cm_init_rx_wr(struct net_device *dev, sge[i].length = PAGE_SIZE; wr->next = NULL; - wr->sg_list = priv->cm.rx_sge; + wr->sg_list = sge; wr->num_sge = priv->cm.num_frags; } -- GitLab From dd07428b44944b42f699408fe31af47977f1e733 Mon Sep 17 00:00:00 2001 From: HighPoint Linux Team Date: Fri, 25 Jul 2008 13:29:24 +0800 Subject: [PATCH 0327/1024] [SCSI] hptiop: add more PCI device IDs Add PCI device ID for new adapter models. Signed-off-by: HighPoint Linux Team Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/hptiop.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index da876d3924b..74d12b58a26 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -1249,6 +1249,13 @@ static struct pci_device_id hptiop_id_table[] = { { PCI_VDEVICE(TTI, 0x3522), (kernel_ulong_t)&hptiop_itl_ops }, { PCI_VDEVICE(TTI, 0x3410), (kernel_ulong_t)&hptiop_itl_ops }, { PCI_VDEVICE(TTI, 0x3540), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops }, + { PCI_VDEVICE(TTI, 0x4311), (kernel_ulong_t)&hptiop_itl_ops }, { PCI_VDEVICE(TTI, 0x3120), (kernel_ulong_t)&hptiop_mv_ops }, { PCI_VDEVICE(TTI, 0x3122), (kernel_ulong_t)&hptiop_mv_ops }, { PCI_VDEVICE(TTI, 0x3020), (kernel_ulong_t)&hptiop_mv_ops }, -- GitLab From ad337591f4fd20de6a0ca03d6715267a5c1d2b16 Mon Sep 17 00:00:00 2001 From: Tim Wright Date: Sun, 27 Jul 2008 17:50:38 -0700 Subject: [PATCH 0328/1024] [SCSI] block: Fix miscalculation of sg_io timeout in CDROM_SEND_PACKET handler. It seems cdrwtool in the udftools has been unusable on "modern" kernels for some time. A Google search reveals many people with the same issue but no solution (cdrwtool fails to format the disk). After spending some time tracking down the issue, it comes down to the following: The udftools still use the older CDROM_SEND_PACKET interface to send things like FORMAT_UNIT through to the drive. They should really be updated, but that's another story. Since most distros are using libata now, the cd or dvd burner appears as a SCSI device, and we wind up in block/scsi_ioctl.c. Here, the code tries to take the "struct cdrom_generic_command" and translate it and stuff it into a "struct sg_io_hdr" structure so it can pass it to the modern sg_io() routine instead. Unfortunately, there is one error, or rather an omission in the translation. The timeout that is passed in in the "struct cdrom_generic_command" is in HZ=100 units, and this is modified and correctly converted to jiffies by use of clock_t_to_jiffies(). However, a little further down, this cgc.timeout value in jiffies is simply copied into the sg_io_hdr timeout, which should be in milliseconds. Since most modern x86 kernels seems to be getting build with HZ=250, the timeout that is passed to sg_io and eventually converted to the timeout_per_command member of the scsi_cmnd structure is now four times too small. Since cdrwtool tries to set the timeout to one hour for the FORMAT_UNIT command, and it takes about 20 minutes to format a 4x CDRW, the SCSI error-handler kicks in after the FORMAT_UNIT completes because it took longer than the incorrectly-calculated timeout. [jejb: fix up whitespace] Signed-off-by: Tim Wright Cc: Stable Tree Signed-off-by: James Bottomley --- block/scsi_ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index c5b9bcfc0a6..12a5182173f 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -518,7 +518,7 @@ int scsi_cmd_ioctl(struct file *file, struct request_queue *q, hdr.sbp = cgc.sense; if (hdr.sbp) hdr.mx_sb_len = sizeof(struct request_sense); - hdr.timeout = cgc.timeout; + hdr.timeout = jiffies_to_msecs(cgc.timeout); hdr.cmdp = ((struct cdrom_generic_command __user*) arg)->cmd; hdr.cmd_len = sizeof(cgc.cmd); -- GitLab From 671a99c8eb2f1dde08ac5538d8cd912047c61ddf Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 29 Jul 2008 11:38:25 -0500 Subject: [PATCH 0329/1024] [SCSI] ses: fix VPD inquiry overrun There are a few kerneloops.org reports like this one: http://www.kerneloops.org/search.php?search=ses_match_to_enclosure That seem to imply we're running off the end of the VPD inquiry data (although at 512 bytes, it should be long enough for just about anything). we should be using correctly sized buffers anyway, so put those in and hope this oops goes away. Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/ses.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index 0fe031f003e..1bcf3c33d7f 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -345,14 +345,14 @@ static int ses_enclosure_find_by_addr(struct enclosure_device *edev, return 0; } -#define VPD_INQUIRY_SIZE 512 +#define VPD_INQUIRY_SIZE 36 static void ses_match_to_enclosure(struct enclosure_device *edev, struct scsi_device *sdev) { unsigned char *buf = kmalloc(VPD_INQUIRY_SIZE, GFP_KERNEL); unsigned char *desc; - int len; + u16 vpd_len; struct efd efd = { .addr = 0, }; @@ -372,9 +372,19 @@ static void ses_match_to_enclosure(struct enclosure_device *edev, VPD_INQUIRY_SIZE, NULL, SES_TIMEOUT, SES_RETRIES)) goto free; - len = (buf[2] << 8) + buf[3]; + vpd_len = (buf[2] << 8) + buf[3]; + kfree(buf); + buf = kmalloc(vpd_len, GFP_KERNEL); + if (!buf) + return; + cmd[3] = vpd_len >> 8; + cmd[4] = vpd_len & 0xff; + if (scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, + vpd_len, NULL, SES_TIMEOUT, SES_RETRIES)) + goto free; + desc = buf + 4; - while (desc < buf + len) { + while (desc < buf + vpd_len) { enum scsi_protocol proto = desc[0] >> 4; u8 code_set = desc[0] & 0x0f; u8 piv = desc[1] & 0x80; -- GitLab From e8bac9e0647dd04c83fd0bfe7cdfe2f6dfb100d0 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 29 Jul 2008 12:52:20 -0500 Subject: [PATCH 0330/1024] [SCSI] scsi_transport_spi: fix oops in revalidate The class_device->device conversion is causing an oops in revalidate because it's assuming that the device_for_each_child iterator will only return struct scsi_device children. The conversion made all former class_devices children of the device as well, so this assumption is broken. Fix it. Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_spi.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 75a64a6cae8..b29360ed0bd 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -366,12 +366,14 @@ spi_transport_rd_attr(rti, "%d\n"); spi_transport_rd_attr(pcomp_en, "%d\n"); spi_transport_rd_attr(hold_mcs, "%d\n"); -/* we only care about the first child device so we return 1 */ +/* we only care about the first child device that's a real SCSI device + * so we return 1 to terminate the iteration when we find it */ static int child_iter(struct device *dev, void *data) { - struct scsi_device *sdev = to_scsi_device(dev); + if (!scsi_is_sdev_device(dev)) + return 0; - spi_dv_device(sdev); + spi_dv_device(to_scsi_device(dev)); return 1; } -- GitLab From 52fd8ca6ad4124c15952ded35cfcf6adbd7ae8d4 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Wed, 30 Jul 2008 09:29:06 -0700 Subject: [PATCH 0331/1024] IB/ipath: Use unsigned long for irq flags A few functions in the ipath driver incorrectly use unsigned int to hold irq flags for spin_lock_irqsave(). This patch was generated using the Coccinelle framework with the following semantic patch: The semantic patch I used was this: @@ expression lock; identifier flags; expression subclass; @@ - unsigned int flags; + unsigned long flags; ... <+... ( spin_lock_irqsave(lock, flags) | _spin_lock_irqsave(lock) | spin_unlock_irqrestore(lock, flags) | _spin_unlock_irqrestore(lock, flags) | read_lock_irqsave(lock, flags) | _read_lock_irqsave(lock) | read_unlock_irqrestore(lock, flags) | _read_unlock_irqrestore(lock, flags) | write_lock_irqsave(lock, flags) | _write_lock_irqsave(lock) | write_unlock_irqrestore(lock, flags) | _write_unlock_irqrestore(lock, flags) | spin_lock_irqsave_nested(lock, flags, subclass) | _spin_lock_irqsave_nested(lock, subclass) | spin_unlock_irqrestore(lock, flags) | _spin_unlock_irqrestore(lock, flags) | _raw_spin_lock_flags(lock, flags) | __raw_spin_lock_flags(lock, flags) ) ...+> Cc: Ralph Campbell Cc: Julia Lawall Cc: Alexey Dobriyan Signed-off-by: Vegard Nossum Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_verbs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c index 55c71882882..b766e40e9eb 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs.c @@ -1021,7 +1021,7 @@ static void sdma_complete(void *cookie, int status) struct ipath_verbs_txreq *tx = cookie; struct ipath_qp *qp = tx->qp; struct ipath_ibdev *dev = to_idev(qp->ibqp.device); - unsigned int flags; + unsigned long flags; enum ib_wc_status ibs = status == IPATH_SDMA_TXREQ_S_OK ? IB_WC_SUCCESS : IB_WC_WR_FLUSH_ERR; @@ -1051,7 +1051,7 @@ static void sdma_complete(void *cookie, int status) static void decrement_dma_busy(struct ipath_qp *qp) { - unsigned int flags; + unsigned long flags; if (atomic_dec_and_test(&qp->s_dma_busy)) { spin_lock_irqsave(&qp->s_lock, flags); @@ -1221,7 +1221,7 @@ static int ipath_verbs_send_pio(struct ipath_qp *qp, unsigned flush_wc; u32 control; int ret; - unsigned int flags; + unsigned long flags; piobuf = ipath_getpiobuf(dd, plen, NULL); if (unlikely(piobuf == NULL)) { -- GitLab From e958d3ace7791f33518f0259cd3cf229408b135c Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 29 Jul 2008 22:32:56 -0700 Subject: [PATCH 0332/1024] backlight: give platform_lcd the same name as the platform device. When registering an platform_lcd, use the name of the platform device specified in case there are more than one platform_lcd backlights registered. Signed-off-by: Ben Dooks Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/platform_lcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c index 72d44dbfce8..29d7121e327 100644 --- a/drivers/video/backlight/platform_lcd.c +++ b/drivers/video/backlight/platform_lcd.c @@ -92,7 +92,7 @@ static int __devinit platform_lcd_probe(struct platform_device *pdev) plcd->us = dev; plcd->pdata = pdata; - plcd->lcd = lcd_device_register("platform-lcd", dev, + plcd->lcd = lcd_device_register(dev_name(dev), dev, plcd, &platform_lcd_ops); if (IS_ERR(plcd->lcd)) { dev_err(dev, "cannot register lcd device\n"); -- GitLab From 1a4e564b7db999fbe5d88318c96ac8747699d417 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 29 Jul 2008 22:32:57 -0700 Subject: [PATCH 0333/1024] resource: add resource_size() Avoid one-off errors by introducing a resource_size() function. Signed-off-by: Magnus Damm Cc: Ben Dooks Cc: Jean Delvare Cc: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ioport.h | 4 ++++ kernel/resource.c | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 2cd07cc2968..22d2115458c 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -118,6 +118,10 @@ extern int allocate_resource(struct resource *root, struct resource *new, int adjust_resource(struct resource *res, resource_size_t start, resource_size_t size); resource_size_t resource_alignment(struct resource *res); +static inline resource_size_t resource_size(struct resource *res) +{ + return res->end - res->start + 1; +} /* Convenience shorthand with allocation */ #define request_region(start,n,name) __request_region(&ioport_resource, (start), (n), (name)) diff --git a/kernel/resource.c b/kernel/resource.c index 74af2d7cb5a..f5b518eabef 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -490,7 +490,7 @@ resource_size_t resource_alignment(struct resource *res) { switch (res->flags & (IORESOURCE_SIZEALIGN | IORESOURCE_STARTALIGN)) { case IORESOURCE_SIZEALIGN: - return res->end - res->start + 1; + return resource_size(res); case IORESOURCE_STARTALIGN: return res->start; default: -- GitLab From a1531acd43310a7e4571d52e8846640667f4c74b Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Tue, 29 Jul 2008 22:32:58 -0700 Subject: [PATCH 0334/1024] cpufreq acpi: only call _PPC after cpufreq ACPI init funcs got called already Ingo Molnar provided a fix to not call _PPC at processor driver initialization time in "[PATCH] ACPI: fix cpufreq regression" (git commit e4233dec749a3519069d9390561b5636a75c7579) But it can still happen that _PPC is called at processor driver initialization time. This patch should make sure that this is not possible anymore. Signed-off-by: Thomas Renninger Cc: Andi Kleen Cc: Len Brown Cc: Dave Jones Cc: Ingo Molnar Cc: Venkatesh Pallipadi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c | 6 ++++++ drivers/acpi/processor_perflib.c | 15 +++++++++++++-- drivers/cpufreq/cpufreq.c | 3 +++ include/linux/cpufreq.h | 1 + 4 files changed, 23 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c index 69288f65314..3233fe84d15 100644 --- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c +++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c @@ -96,6 +96,12 @@ static int pmi_notifier(struct notifier_block *nb, struct cpufreq_frequency_table *cbe_freqs; u8 node; + /* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE + * and CPUFREQ_NOTIFY policy events?) + */ + if (event == CPUFREQ_START) + return 0; + cbe_freqs = cpufreq_frequency_get_table(policy->cpu); node = cbe_cpu_to_node(policy->cpu); diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index b4749969c6b..e98071a6481 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -64,7 +64,13 @@ static DEFINE_MUTEX(performance_mutex); * policy is adjusted accordingly. */ -static unsigned int ignore_ppc = 0; +/* ignore_ppc: + * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not called yet + * ignore _PPC + * 0 -> cpufreq low level drivers initialized -> consider _PPC values + * 1 -> ignore _PPC totally -> forced by user through boot param + */ +static unsigned int ignore_ppc = -1; module_param(ignore_ppc, uint, 0644); MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \ "limited by BIOS, this should help"); @@ -72,7 +78,7 @@ MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \ #define PPC_REGISTERED 1 #define PPC_IN_USE 2 -static int acpi_processor_ppc_status = 0; +static int acpi_processor_ppc_status; static int acpi_processor_ppc_notifier(struct notifier_block *nb, unsigned long event, void *data) @@ -81,6 +87,11 @@ static int acpi_processor_ppc_notifier(struct notifier_block *nb, struct acpi_processor *pr; unsigned int ppc = 0; + if (event == CPUFREQ_START && ignore_ppc <= 0) { + ignore_ppc = 0; + return 0; + } + if (ignore_ppc) return 0; diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 8d6a3ff0267..8a67f16987d 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -825,6 +825,9 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) policy->user_policy.min = policy->cpuinfo.min_freq; policy->user_policy.max = policy->cpuinfo.max_freq; + blocking_notifier_call_chain(&cpufreq_policy_notifier_list, + CPUFREQ_START, policy); + #ifdef CONFIG_SMP #ifdef CONFIG_HOTPLUG_CPU diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 2270ca5ec63..6fd5668aa57 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -106,6 +106,7 @@ struct cpufreq_policy { #define CPUFREQ_ADJUST (0) #define CPUFREQ_INCOMPATIBLE (1) #define CPUFREQ_NOTIFY (2) +#define CPUFREQ_START (3) #define CPUFREQ_SHARED_TYPE_NONE (0) /* None */ #define CPUFREQ_SHARED_TYPE_HW (1) /* HW does needed coordination */ -- GitLab From 9b67c5d48f104aae6118bbb052dd79a15ab9794b Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Tue, 29 Jul 2008 22:32:59 -0700 Subject: [PATCH 0335/1024] acpi cpufreq cleanup: move bailing out of function before locking the mutex Signed-off-by: Thomas Renninger Cc: Andi Kleen Cc: Len Brown Cc: Dave Jones Cc: Ingo Molnar Cc: Venkatesh Pallipadi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/processor_perflib.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index e98071a6481..0133af49cf0 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -95,10 +95,10 @@ static int acpi_processor_ppc_notifier(struct notifier_block *nb, if (ignore_ppc) return 0; - mutex_lock(&performance_mutex); - if (event != CPUFREQ_INCOMPATIBLE) - goto out; + return 0; + + mutex_lock(&performance_mutex); pr = per_cpu(processors, policy->cpu); if (!pr || !pr->performance) -- GitLab From fdac4e69a1fc181652b37ce6a32ab8a56b0f3bcf Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 29 Jul 2008 22:33:01 -0700 Subject: [PATCH 0336/1024] sticore: don't activate unsupported GSC STI cards on HPPA On HPPA there exists some older GSC graphics cards, which need special graphic-card-BIOS patching to become supported. Since we don't have yet implemented the patching, it's better to detect such cards in advance, inform to the user that there are known problems and to not activate the card. Problematic GSC cards and BIOS versions are: * Hyperdrive/Hyperbowl (A4071A) graphics card series: * ID = 0x2BCB015A (Version 8.04/8) * ID = 0x2BCB015A (Version 8.04/11) * Thunder 1 VISUALIZE 48 card: * ID = 0x2F23E5FC (Version 8.05/9) * Thunder 2 VISUALIZE 48 XP card: * ID = 0x2F8D570E (Version 8.05/12) * Some Hyperion and ThunderHawk GSC cards Further details are described here: http://parisc-linux.org/faq/graphics-howto.html Signed-off-by: Helge Deller Cc: Kyle McMartin Cc: Krzysztof Helt Cc: "Antonino A. Daplas" Cc: Grant Grundler Cc: Matthew Wilcox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/console/sticore.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c index d7822af0e00..ef7870f5ea0 100644 --- a/drivers/video/console/sticore.c +++ b/drivers/video/console/sticore.c @@ -24,6 +24,7 @@ #include #include #include +#include #include "../sticore.h" @@ -725,6 +726,7 @@ static int __devinit sti_read_rom(int wordmode, struct sti_struct *sti, { struct sti_cooked_rom *cooked; struct sti_rom *raw = NULL; + unsigned long revno; cooked = kmalloc(sizeof *cooked, GFP_KERNEL); if (!cooked) @@ -767,9 +769,35 @@ static int __devinit sti_read_rom(int wordmode, struct sti_struct *sti, sti->graphics_id[1] = raw->graphics_id[1]; sti_dump_rom(raw); - + + /* check if the ROM routines in this card are compatible */ + if (wordmode || sti->graphics_id[1] != 0x09A02587) + goto ok; + + revno = (raw->revno[0] << 8) | raw->revno[1]; + + switch (sti->graphics_id[0]) { + case S9000_ID_HCRX: + /* HyperA or HyperB ? */ + if (revno == 0x8408 || revno == 0x840b) + goto msg_not_supported; + break; + case CRT_ID_THUNDER: + if (revno == 0x8509) + goto msg_not_supported; + break; + case CRT_ID_THUNDER2: + if (revno == 0x850c) + goto msg_not_supported; + } +ok: return 1; +msg_not_supported: + printk(KERN_ERR "Sorry, this GSC/STI card is not yet supported.\n"); + printk(KERN_ERR "Please see http://parisc-linux.org/faq/" + "graphics-howto.html for more info.\n"); + /* fall through */ out_err: kfree(raw); kfree(cooked); -- GitLab From 3971e1a917548977cff71418a7c3575ffbc9571f Mon Sep 17 00:00:00 2001 From: Alex Nixon Date: Tue, 29 Jul 2008 22:33:03 -0700 Subject: [PATCH 0337/1024] VFS: increase pseudo-filesystem block size to PAGE_SIZE This commit: commit ba52de123d454b57369f291348266d86f4b35070 Author: Theodore Ts'o Date: Wed Sep 27 01:50:49 2006 -0700 [PATCH] inode-diet: Eliminate i_blksize from the inode structure caused the block size used by pseudo-filesystems to decrease from PAGE_SIZE to 1024 leading to a doubling of the number of context switches during a kernbench run. Signed-off-by: Alex Nixon Cc: Andi Kleen Cc: Jeremy Fitzhardinge Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Ian Campbell Cc: "Theodore Ts'o" Cc: Alexander Viro Cc: Hugh Dickins Cc: Jens Axboe Cc: [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/libfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/libfs.c b/fs/libfs.c index baeb71ee1cd..1add676a19d 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -216,8 +216,8 @@ int get_sb_pseudo(struct file_system_type *fs_type, char *name, s->s_flags = MS_NOUSER; s->s_maxbytes = ~0ULL; - s->s_blocksize = 1024; - s->s_blocksize_bits = 10; + s->s_blocksize = PAGE_SIZE; + s->s_blocksize_bits = PAGE_SHIFT; s->s_magic = magic; s->s_op = ops ? ops : &simple_super_operations; s->s_time_gran = 1; -- GitLab From 1d1958f05095a7e9ecbba86235122784a3d1b561 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 29 Jul 2008 22:33:16 -0700 Subject: [PATCH 0338/1024] mm: remove find_max_pfn_with_active_regions It has no user now Also print out info about adding/removing active regions. Signed-off-by: Yinghai Lu Acked-by: Mel Gorman Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 1 - mm/page_alloc.c | 17 ----------------- 2 files changed, 18 deletions(-) diff --git a/include/linux/mm.h b/include/linux/mm.h index 866a3dbe5c7..5e2c8af4999 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1041,7 +1041,6 @@ extern unsigned long absent_pages_in_range(unsigned long start_pfn, extern void get_pfn_range_for_nid(unsigned int nid, unsigned long *start_pfn, unsigned long *end_pfn); extern unsigned long find_min_pfn_with_active_regions(void); -extern unsigned long find_max_pfn_with_active_regions(void); extern void free_bootmem_with_active_regions(int nid, unsigned long max_low_pfn); typedef int (*work_fn_t)(unsigned long, unsigned long, void *); diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 3cf3d05b6bd..401d104d2bb 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3753,23 +3753,6 @@ unsigned long __init find_min_pfn_with_active_regions(void) return find_min_pfn_for_node(MAX_NUMNODES); } -/** - * find_max_pfn_with_active_regions - Find the maximum PFN registered - * - * It returns the maximum PFN based on information provided via - * add_active_range(). - */ -unsigned long __init find_max_pfn_with_active_regions(void) -{ - int i; - unsigned long max_pfn = 0; - - for (i = 0; i < nr_nodemap_entries; i++) - max_pfn = max(max_pfn, early_node_map[i].end_pfn); - - return max_pfn; -} - /* * early_calculate_totalpages() * Sum pages in active regions for movable zone. -- GitLab From 5a3eb9f6b7c598529f832b8baa6458ab1cbab2c6 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 29 Jul 2008 22:33:18 -0700 Subject: [PATCH 0339/1024] cgroup: fix possible memory leak There's a leak if copy_from_user() returns failure. Signed-off-by: Li Zefan Cc: Paul Menage Cc: Cedric Le Goater Cc: Balbir Singh Cc: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 657f8f8d93a..28debe4e148 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1424,14 +1424,17 @@ static ssize_t cgroup_write_string(struct cgroup *cgrp, struct cftype *cft, if (buffer == NULL) return -ENOMEM; } - if (nbytes && copy_from_user(buffer, userbuf, nbytes)) - return -EFAULT; + if (nbytes && copy_from_user(buffer, userbuf, nbytes)) { + retval = -EFAULT; + goto out; + } buffer[nbytes] = 0; /* nul-terminate */ strstrip(buffer); retval = cft->write_string(cgrp, cft, buffer); if (!retval) retval = nbytes; +out: if (buffer != local_buffer) kfree(buffer); return retval; -- GitLab From 36553434f475a84b653e25e74490ee8df43b86d5 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 29 Jul 2008 22:33:19 -0700 Subject: [PATCH 0340/1024] cgroup: remove duplicate code in allocate_cg_link() - just call free_cg_links() in allocate_cg_links() - the list will get initialized in allocate_cg_links(), so don't init it twice Signed-off-by: Li Zefan Cc: Paul Menage Cc: Cedric Le Goater Cc: Balbir Singh Cc: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 30 ++++++++++++------------------ 1 file changed, 12 insertions(+), 18 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 28debe4e148..249a517591b 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -355,6 +355,17 @@ static struct css_set *find_existing_css_set( return NULL; } +static void free_cg_links(struct list_head *tmp) +{ + struct cg_cgroup_link *link; + struct cg_cgroup_link *saved_link; + + list_for_each_entry_safe(link, saved_link, tmp, cgrp_link_list) { + list_del(&link->cgrp_link_list); + kfree(link); + } +} + /* * allocate_cg_links() allocates "count" cg_cgroup_link structures * and chains them on tmp through their cgrp_link_list fields. Returns 0 on @@ -363,17 +374,12 @@ static struct css_set *find_existing_css_set( static int allocate_cg_links(int count, struct list_head *tmp) { struct cg_cgroup_link *link; - struct cg_cgroup_link *saved_link; int i; INIT_LIST_HEAD(tmp); for (i = 0; i < count; i++) { link = kmalloc(sizeof(*link), GFP_KERNEL); if (!link) { - list_for_each_entry_safe(link, saved_link, tmp, - cgrp_link_list) { - list_del(&link->cgrp_link_list); - kfree(link); - } + free_cg_links(tmp); return -ENOMEM; } list_add(&link->cgrp_link_list, tmp); @@ -381,17 +387,6 @@ static int allocate_cg_links(int count, struct list_head *tmp) return 0; } -static void free_cg_links(struct list_head *tmp) -{ - struct cg_cgroup_link *link; - struct cg_cgroup_link *saved_link; - - list_for_each_entry_safe(link, saved_link, tmp, cgrp_link_list) { - list_del(&link->cgrp_link_list); - kfree(link); - } -} - /* * find_css_set() takes an existing cgroup group and a * cgroup object, and returns a css_set object that's @@ -956,7 +951,6 @@ static int cgroup_get_sb(struct file_system_type *fs_type, struct super_block *sb; struct cgroupfs_root *root; struct list_head tmp_cg_links; - INIT_LIST_HEAD(&tmp_cg_links); /* First find the desired set of subsystems */ ret = parse_cgroupfs_options(data, &opts); -- GitLab From 55b6fd0162ace1e0f1b52c8c092565c115127ef6 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 29 Jul 2008 22:33:20 -0700 Subject: [PATCH 0341/1024] cgroup: uninline cgroup_has_css_refs() It's not small enough, and has 2 call sites. text data bss dec hex filename 12813 1676 4832 19321 4b79 cgroup.o.orig 12775 1676 4832 19283 4b53 cgroup.o Signed-off-by: Li Zefan Cc: Paul Menage Cc: Cedric Le Goater Cc: Balbir Singh Cc: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 249a517591b..13932abde15 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2368,7 +2368,7 @@ static int cgroup_mkdir(struct inode *dir, struct dentry *dentry, int mode) return cgroup_create(c_parent, dentry, mode | S_IFDIR); } -static inline int cgroup_has_css_refs(struct cgroup *cgrp) +static int cgroup_has_css_refs(struct cgroup *cgrp) { /* Check the reference count on each subsystem. Since we * already established that there are no tasks in the -- GitLab From 4ef1b0fd61333b3b81ebe29283898c6c84b15c9f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 29 Jul 2008 22:33:20 -0700 Subject: [PATCH 0342/1024] memcg: remove redundant check in move_task() It's guaranteed by cgroup that old_cgrp != cgrp. Signed-off-by: Li Zefan Cc: Paul Menage Cc: Cedric Le Goater Cc: Balbir Singh Acked-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index fba566c5132..7056c3bdb47 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1168,9 +1168,6 @@ static void mem_cgroup_move_task(struct cgroup_subsys *ss, mem = mem_cgroup_from_cont(cont); old_mem = mem_cgroup_from_cont(old_cont); - if (mem == old_mem) - goto out; - /* * Only thread group leaders are allowed to migrate, the mm_struct is * in effect owned by the leader -- GitLab From 8d1e6266f512b3a94ef6d33528ff385f1aea0392 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 29 Jul 2008 22:33:21 -0700 Subject: [PATCH 0343/1024] cpuset: a bit cleanup for scan_for_empty_cpusets() clean up hierarchy traversal code Signed-off-by: Li Zefan Cc: Paul Menage Cc: Cedric Le Goater Cc: Balbir Singh Cc: KAMEZAWA Hiroyuki Cc: Paul Jackson Cc: Cliff Wickman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cpuset.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 91cf85b36dd..3624dc0e95e 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1833,24 +1833,21 @@ static void remove_tasks_in_empty_cpuset(struct cpuset *cs) */ static void scan_for_empty_cpusets(const struct cpuset *root) { + LIST_HEAD(queue); struct cpuset *cp; /* scans cpusets being updated */ struct cpuset *child; /* scans child cpusets of cp */ - struct list_head queue; struct cgroup *cont; nodemask_t oldmems; - INIT_LIST_HEAD(&queue); - list_add_tail((struct list_head *)&root->stack_list, &queue); while (!list_empty(&queue)) { - cp = container_of(queue.next, struct cpuset, stack_list); + cp = list_first_entry(&queue, struct cpuset, stack_list); list_del(queue.next); list_for_each_entry(cont, &cp->css.cgroup->children, sibling) { child = cgroup_cs(cont); list_add_tail(&child->stack_list, &queue); } - cont = cp->css.cgroup; /* Continue past cpusets with all cpus, mems online */ if (cpus_subset(cp->cpus_allowed, cpu_online_map) && -- GitLab From f5393693e96393131a4a2e2743f883986d508503 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Tue, 29 Jul 2008 22:33:22 -0700 Subject: [PATCH 0344/1024] cpuset: speed up sched domain partition All child cpusets contain a subset of the parent's cpus, so we can skip them when partitioning sched domains. This decreases 'csa' greately for cpusets with multi-level hierarchy. Signed-off-by: Lai Jiangshan Signed-off-by: Li Zefan Cc: Paul Menage Cc: Cedric Le Goater Cc: Balbir Singh Cc: KAMEZAWA Hiroyuki Reviewed-by: Paul Jackson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cpuset.c | 41 +++++++++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 4 deletions(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 3624dc0e95e..c818c36b0c5 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -486,13 +486,38 @@ static int cpusets_overlap(struct cpuset *a, struct cpuset *b) static void update_domain_attr(struct sched_domain_attr *dattr, struct cpuset *c) { - if (!dattr) - return; if (dattr->relax_domain_level < c->relax_domain_level) dattr->relax_domain_level = c->relax_domain_level; return; } +static void +update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c) +{ + LIST_HEAD(q); + + list_add(&c->stack_list, &q); + while (!list_empty(&q)) { + struct cpuset *cp; + struct cgroup *cont; + struct cpuset *child; + + cp = list_first_entry(&q, struct cpuset, stack_list); + list_del(q.next); + + if (cpus_empty(cp->cpus_allowed)) + continue; + + if (is_sched_load_balance(cp)) + update_domain_attr(dattr, cp); + + list_for_each_entry(cont, &cp->css.cgroup->children, sibling) { + child = cgroup_cs(cont); + list_add_tail(&child->stack_list, &q); + } + } +} + /* * rebuild_sched_domains() * @@ -614,8 +639,16 @@ void rebuild_sched_domains(void) if (cpus_empty(cp->cpus_allowed)) continue; - if (is_sched_load_balance(cp)) + /* + * All child cpusets contain a subset of the parent's cpus, so + * just skip them, and then we call update_domain_attr_tree() + * to calc relax_domain_level of the corresponding sched + * domain. + */ + if (is_sched_load_balance(cp)) { csa[csn++] = cp; + continue; + } list_for_each_entry(cont, &cp->css.cgroup->children, sibling) { child = cgroup_cs(cont); @@ -686,7 +719,7 @@ restart: cpus_or(*dp, *dp, b->cpus_allowed); b->pn = -1; if (dattr) - update_domain_attr(dattr + update_domain_attr_tree(dattr + nslot, b); } } -- GitLab From 93a6557558a13f9ff35213efeca483f353c39dd3 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 29 Jul 2008 22:33:23 -0700 Subject: [PATCH 0345/1024] cpuset: fix wrong calculation of relax domain level When multiple cpusets are overlapping in their 'cpus' and hence they form a single sched domain, the largest sched_relax_domain_level among those should be used. But when top_cpuset's sched_load_balance is set, its sched_relax_domain_level is used regardless other sub-cpusets'. This patch fixes it by walking the cpuset hierarchy to find the largest sched_relax_domain_level. Signed-off-by: Lai Jiangshan Signed-off-by: Li Zefan Cc: Paul Menage Cc: Cedric Le Goater Cc: Balbir Singh Cc: KAMEZAWA Hiroyuki Reviewed-by: Paul Jackson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cpuset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index c818c36b0c5..7a82e9033a7 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -616,7 +616,7 @@ void rebuild_sched_domains(void) dattr = kmalloc(sizeof(struct sched_domain_attr), GFP_KERNEL); if (dattr) { *dattr = SD_ATTR_INIT; - update_domain_attr(dattr, &top_cpuset); + update_domain_attr_tree(dattr, &top_cpuset); } *doms = top_cpuset.cpus_allowed; goto rebuild; -- GitLab From aeed682421a5ebfbf46940e30c3d1caf3bc64304 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 29 Jul 2008 22:33:24 -0700 Subject: [PATCH 0346/1024] cpuset: clean up cpuset hierarchy traversal code Use cpuset.stack_list rather than kfifo, so we avoid memory allocation for kfifo. Signed-off-by: Li Zefan Signed-off-by: Lai Jiangshan Cc: Paul Menage Cc: Cedric Le Goater Cc: Balbir Singh Cc: KAMEZAWA Hiroyuki Cc: Paul Jackson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cpuset.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 7a82e9033a7..d5ab79cf516 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -54,7 +54,6 @@ #include #include #include -#include #include #include @@ -557,7 +556,7 @@ update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c) * So the reverse nesting would risk an ABBA deadlock. * * The three key local variables below are: - * q - a kfifo queue of cpuset pointers, used to implement a + * q - a linked-list queue of cpuset pointers, used to implement a * top-down scan of all cpusets. This scan loads a pointer * to each cpuset marked is_sched_load_balance into the * array 'csa'. For our purposes, rebuilding the schedulers @@ -592,7 +591,7 @@ update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c) void rebuild_sched_domains(void) { - struct kfifo *q; /* queue of cpusets to be scanned */ + LIST_HEAD(q); /* queue of cpusets to be scanned*/ struct cpuset *cp; /* scans q */ struct cpuset **csa; /* array of all cpuset ptrs */ int csn; /* how many cpuset ptrs in csa so far */ @@ -602,7 +601,6 @@ void rebuild_sched_domains(void) int ndoms; /* number of sched domains in result */ int nslot; /* next empty doms[] cpumask_t slot */ - q = NULL; csa = NULL; doms = NULL; dattr = NULL; @@ -622,20 +620,19 @@ void rebuild_sched_domains(void) goto rebuild; } - q = kfifo_alloc(number_of_cpusets * sizeof(cp), GFP_KERNEL, NULL); - if (IS_ERR(q)) - goto done; csa = kmalloc(number_of_cpusets * sizeof(cp), GFP_KERNEL); if (!csa) goto done; csn = 0; - cp = &top_cpuset; - __kfifo_put(q, (void *)&cp, sizeof(cp)); - while (__kfifo_get(q, (void *)&cp, sizeof(cp))) { + list_add(&top_cpuset.stack_list, &q); + while (!list_empty(&q)) { struct cgroup *cont; struct cpuset *child; /* scans child cpusets of cp */ + cp = list_first_entry(&q, struct cpuset, stack_list); + list_del(q.next); + if (cpus_empty(cp->cpus_allowed)) continue; @@ -652,7 +649,7 @@ void rebuild_sched_domains(void) list_for_each_entry(cont, &cp->css.cgroup->children, sibling) { child = cgroup_cs(cont); - __kfifo_put(q, (void *)&child, sizeof(cp)); + list_add_tail(&child->stack_list, &q); } } @@ -735,8 +732,6 @@ rebuild: put_online_cpus(); done: - if (q && !IS_ERR(q)) - kfifo_free(q); kfree(csa); /* Don't kfree(doms) -- partition_sched_domains() does that. */ /* Don't kfree(dattr) -- partition_sched_domains() does that. */ -- GitLab From 126ed36d0edee41c0775906a164ad7e8bef55864 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 29 Jul 2008 22:33:25 -0700 Subject: [PATCH 0347/1024] backlight: ensure platform_lcd on by default It seems that we need to ensure that the lcd is powered up at start, otherwise we do not see a display. Signed-off-by: Ben Dooks Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/backlight/platform_lcd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/video/backlight/platform_lcd.c b/drivers/video/backlight/platform_lcd.c index 29d7121e327..738694d2388 100644 --- a/drivers/video/backlight/platform_lcd.c +++ b/drivers/video/backlight/platform_lcd.c @@ -101,6 +101,8 @@ static int __devinit platform_lcd_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, plcd); + platform_lcd_set_power(plcd->lcd, FB_BLANK_NORMAL); + return 0; err_mem: -- GitLab From 26c131c71e31973e273adde4027e6a80bde164dc Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 29 Jul 2008 22:33:25 -0700 Subject: [PATCH 0348/1024] iscsi_ibft_find: fix modpost warning Exporting __init functions is wrong. Signed-off-by: Jan Beulich Acked-by: Konrad Rzeszutek Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/firmware/iscsi_ibft_find.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c index 11f17440fea..d53fbbfefa3 100644 --- a/drivers/firmware/iscsi_ibft_find.c +++ b/drivers/firmware/iscsi_ibft_find.c @@ -81,4 +81,3 @@ void __init reserve_ibft_region(void) if (ibft_addr) reserve_bootmem(pos, PAGE_ALIGN(len), BOOTMEM_DEFAULT); } -EXPORT_SYMBOL_GPL(reserve_ibft_region); -- GitLab From d667b6ddbcdc036a27407c8b2c1243f1dfd69e26 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 29 Jul 2008 22:33:26 -0700 Subject: [PATCH 0349/1024] hpwdt: don't use static flags Static (read: global) is potential problem. Two threads can corrupt each other's interrupt status, better avoid this. Signed-off-by: Alexey Dobriyan Cc: Wim Van Sebroeck Cc: Thomas Mingarelli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/watchdog/hpwdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index eaa3f2a79ff..ccd6c530782 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -420,7 +420,7 @@ static int __devinit detect_cru_service(void) static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, void *data) { - static unsigned long rom_pl; + unsigned long rom_pl; static int die_nmi_called; if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI) -- GitLab From 950d442ad053e660538cdaa6efc0e060c2a65062 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 29 Jul 2008 22:33:28 -0700 Subject: [PATCH 0350/1024] drivers/video: release mutex in error handling code The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // Signed-off-by: Julia Lawall Acked-by: Krzysztof Helt Acked-by: Ondrej Zajicek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/arkfb.c | 9 +++------ drivers/video/vt8623fb.c | 9 +++------ 2 files changed, 6 insertions(+), 12 deletions(-) diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c index 5001bd4ef46..38a1e8308c8 100644 --- a/drivers/video/arkfb.c +++ b/drivers/video/arkfb.c @@ -1126,11 +1126,8 @@ static int ark_pci_resume (struct pci_dev* dev) acquire_console_sem(); mutex_lock(&(par->open_lock)); - if (par->ref_count == 0) { - mutex_unlock(&(par->open_lock)); - release_console_sem(); - return 0; - } + if (par->ref_count == 0) + goto fail; pci_set_power_state(dev, PCI_D0); pci_restore_state(dev); @@ -1143,8 +1140,8 @@ static int ark_pci_resume (struct pci_dev* dev) arkfb_set_par(info); fb_set_suspend(info, 0); - mutex_unlock(&(par->open_lock)); fail: + mutex_unlock(&(par->open_lock)); release_console_sem(); return 0; } diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c index 536ab11623f..4a484ee98f8 100644 --- a/drivers/video/vt8623fb.c +++ b/drivers/video/vt8623fb.c @@ -853,11 +853,8 @@ static int vt8623_pci_resume(struct pci_dev* dev) acquire_console_sem(); mutex_lock(&(par->open_lock)); - if (par->ref_count == 0) { - mutex_unlock(&(par->open_lock)); - release_console_sem(); - return 0; - } + if (par->ref_count == 0) + goto fail; pci_set_power_state(dev, PCI_D0); pci_restore_state(dev); @@ -870,8 +867,8 @@ static int vt8623_pci_resume(struct pci_dev* dev) vt8623fb_set_par(info); fb_set_suspend(info, 0); - mutex_unlock(&(par->open_lock)); fail: + mutex_unlock(&(par->open_lock)); release_console_sem(); return 0; -- GitLab From b68bb2632453a9ca7d10a00d79adf60968cb4c05 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 29 Jul 2008 22:33:30 -0700 Subject: [PATCH 0351/1024] rtc: don't return -EBUSY when mutex_lock_interruptible() fails It was pointed out that the RTC framework handles its mutex locks oddly ... returning -EBUSY when interrupted. This fixes that by returning the value of mutex_lock_interruptible() (i.e. -EINTR). Signed-off-by: David Brownell Acked-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/interface.c | 10 +++++----- drivers/rtc/rtc-dev.c | 2 +- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index d397fa5f3a9..7af60b98d8a 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -20,7 +20,7 @@ int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm) err = mutex_lock_interruptible(&rtc->ops_lock); if (err) - return -EBUSY; + return err; if (!rtc->ops) err = -ENODEV; @@ -46,7 +46,7 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm) err = mutex_lock_interruptible(&rtc->ops_lock); if (err) - return -EBUSY; + return err; if (!rtc->ops) err = -ENODEV; @@ -66,7 +66,7 @@ int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs) err = mutex_lock_interruptible(&rtc->ops_lock); if (err) - return -EBUSY; + return err; if (!rtc->ops) err = -ENODEV; @@ -106,7 +106,7 @@ static int rtc_read_alarm_internal(struct rtc_device *rtc, struct rtc_wkalrm *al err = mutex_lock_interruptible(&rtc->ops_lock); if (err) - return -EBUSY; + return err; if (rtc->ops == NULL) err = -ENODEV; @@ -293,7 +293,7 @@ int rtc_set_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) err = mutex_lock_interruptible(&rtc->ops_lock); if (err) - return -EBUSY; + return err; if (!rtc->ops) err = -ENODEV; diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index 0a870b7e5c3..ae3bd4de767 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -221,7 +221,7 @@ static long rtc_dev_ioctl(struct file *file, err = mutex_lock_interruptible(&rtc->ops_lock); if (err) - return -EBUSY; + return err; /* check that the calling task has appropriate permissions * for certain ioctls. doing this check here is useful -- GitLab From 5def9a3a22e09c99717f41ab7f07ec9e1a1f3ec8 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Tue, 29 Jul 2008 22:33:31 -0700 Subject: [PATCH 0352/1024] markers: fix markers read barrier for multiple probes Paul pointed out two incorrect read barriers in the marker handler code in the path where multiple probes are connected. Those are ordering reads of "ptype" (single or multi probe marker), "multi" array pointer, and "multi" array data access. It should be ordered like this : read ptype smp_rmb() read multi array pointer smp_read_barrier_depends() access data referenced by multi array pointer The code with a single probe connected (optimized case, does not have to allocate an array) has correct memory ordering. It applies to kernel 2.6.26.x, 2.6.25.x and linux-next. Signed-off-by: Mathieu Desnoyers Cc: "Paul E. McKenney" Cc: [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/marker.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/kernel/marker.c b/kernel/marker.c index 971da531790..7d1faecd7a5 100644 --- a/kernel/marker.c +++ b/kernel/marker.c @@ -125,6 +125,11 @@ void marker_probe_cb(const struct marker *mdata, void *call_private, ...) } else { struct marker_probe_closure *multi; int i; + /* + * Read mdata->ptype before mdata->multi. + */ + smp_rmb(); + multi = mdata->multi; /* * multi points to an array, therefore accessing the array * depends on reading multi. However, even in this case, @@ -133,7 +138,6 @@ void marker_probe_cb(const struct marker *mdata, void *call_private, ...) * in the fast path, so put the explicit barrier here. */ smp_read_barrier_depends(); - multi = mdata->multi; for (i = 0; multi[i].func; i++) { va_start(args, call_private); multi[i].func(multi[i].probe_private, call_private, @@ -174,6 +178,11 @@ void marker_probe_cb_noarg(const struct marker *mdata, void *call_private, ...) } else { struct marker_probe_closure *multi; int i; + /* + * Read mdata->ptype before mdata->multi. + */ + smp_rmb(); + multi = mdata->multi; /* * multi points to an array, therefore accessing the array * depends on reading multi. However, even in this case, @@ -182,7 +191,6 @@ void marker_probe_cb_noarg(const struct marker *mdata, void *call_private, ...) * in the fast path, so put the explicit barrier here. */ smp_read_barrier_depends(); - multi = mdata->multi; for (i = 0; multi[i].func; i++) multi[i].func(multi[i].probe_private, call_private, mdata->format, &args); -- GitLab From c389d27b5e643d745f55ffb939b1426060ba63d4 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 29 Jul 2008 22:33:32 -0700 Subject: [PATCH 0353/1024] 8250.c: port.lock is irq-safe serial8250_startup() doesn't disable interrupts while taking the &up->port.lock which might race against the interrupt handler serial8250_interrupt(), which when entered, will deadlock waiting for the lock to be released. Signed-off-by: Borislav Petkov Tested-by: Ingo Molnar Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index a97f1ae11f7..342e12fb1c2 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1885,7 +1885,7 @@ static int serial8250_startup(struct uart_port *port) * the interrupt is enabled. Delays are necessary to * allow register changes to become visible. */ - spin_lock(&up->port.lock); + spin_lock_irqsave(&up->port.lock, flags); if (up->port.flags & UPF_SHARE_IRQ) disable_irq_nosync(up->port.irq); @@ -1901,7 +1901,7 @@ static int serial8250_startup(struct uart_port *port) if (up->port.flags & UPF_SHARE_IRQ) enable_irq(up->port.irq); - spin_unlock(&up->port.lock); + spin_unlock_irqrestore(&up->port.lock, flags); /* * If the interrupt is not reasserted, setup a timer to -- GitLab From 3f1712bac586069d6c891a8201457283b27e8abe Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 29 Jul 2008 22:33:32 -0700 Subject: [PATCH 0354/1024] print_ip_sym(): use %pS Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kallsyms.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h index 57aefa160a9..b9614488744 100644 --- a/include/linux/kallsyms.h +++ b/include/linux/kallsyms.h @@ -108,8 +108,7 @@ static inline void print_fn_descriptor_symbol(const char *fmt, void *addr) static inline void print_ip_sym(unsigned long ip) { - printk("[<%p>]", (void *) ip); - print_symbol(" %s\n", ip); + printk("[<%p>] %pS\n", (void *) ip, (void *) ip); } #endif /*_LINUX_KALLSYMS_H*/ -- GitLab From 2c203003f64de5fe55ae35712942100d270667fa Mon Sep 17 00:00:00 2001 From: Jerome Arbez-Gindre Date: Tue, 29 Jul 2008 22:33:33 -0700 Subject: [PATCH 0355/1024] connector: add a BlackBoard user to connector Add a BlackBoard user to connector. BlackBoard is part of the TSP GPL sampling framework (http://savannah.nongnu.org/p/tsp) [akpm@linux-foundation.org: add comment] Signed-off-by: Jerome Arbez-Gindre Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/connector.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/connector.h b/include/linux/connector.h index 96a89d3d672..5c7f9468f75 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -38,8 +38,9 @@ #define CN_W1_VAL 0x1 #define CN_IDX_V86D 0x4 #define CN_VAL_V86D_UVESAFB 0x1 +#define CN_IDX_BB 0x5 /* BlackBoard, from the TSP GPL sampling framework */ -#define CN_NETLINK_USERS 5 +#define CN_NETLINK_USERS 6 /* * Maximum connector's message size. -- GitLab From 06ac667903ebea8191d4f7e7fa4e0936161e25fe Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 29 Jul 2008 22:33:34 -0700 Subject: [PATCH 0356/1024] uml: fix tty-related build error /home/wangcong/Projects/linux-2.6/arch/um/drivers/line.c: In function `line_write_interrupt': /home/wangcong/Projects/linux-2.6/arch/um/drivers/line.c:366: error: `struct tty_ldisc' has no member named `write_wakeup' /home/wangcong/Projects/linux-2.6/arch/um/drivers/line.c:367: error: `struct tty_ldisc' has no member named `write_wakeup' Signed-off-by: WANG Cong Cc: Jeff Dike Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/um/drivers/line.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 5047490fc29..d741f35d7b3 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -362,19 +362,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data) if (tty == NULL) return IRQ_NONE; - if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) && - (tty->ldisc.write_wakeup != NULL)) - (tty->ldisc.write_wakeup)(tty); - - /* - * BLOCKING mode - * In blocking mode, everything sleeps on tty->write_wait. - * Sleeping in the console driver would break non-blocking - * writes. - */ - - if (waitqueue_active(&tty->write_wait)) - wake_up_interruptible(&tty->write_wait); + tty_wakeup(tty); return IRQ_HANDLED; } -- GitLab From bd673c7c3b1681dbfabab0062e67398dadf806af Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 29 Jul 2008 22:33:36 -0700 Subject: [PATCH 0357/1024] initrd: cast `initrd_start' to `void *' commit fb6624ebd912e3d6907ca6490248e73368223da9 (initrd: Fix virtual/physical mix-up in overwrite test) introduced the compiler warning below on mips, as its virt_to_page() doesn't cast the passed address to unsigned long internally, unlike on most other architectures: init/main.c: In function `start_kernel': init/main.c:633: warning: passing argument 1 of `virt_to_phys' makes pointer from integer without a cast init/main.c:636: warning: passing argument 1 of `virt_to_phys' makes pointer from integer without a cast For now, kill the warning by explicitly casting initrd_start to `void *', as that's the type it should really be. Reported-by: Atsushi Nemoto Signed-off-by: Geert Uytterhoeven Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- init/main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/init/main.c b/init/main.c index 20fdc9884b7..9c3b68b86ca 100644 --- a/init/main.c +++ b/init/main.c @@ -635,10 +635,11 @@ asmlinkage void __init start_kernel(void) #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start && !initrd_below_start_ok && - page_to_pfn(virt_to_page(initrd_start)) < min_low_pfn) { + page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) { printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - " "disabling it.\n", - page_to_pfn(virt_to_page(initrd_start)), min_low_pfn); + page_to_pfn(virt_to_page((void *)initrd_start)), + min_low_pfn); initrd_start = 0; } #endif -- GitLab From 8f3d137e0d6cd470a4e404cbc67480a0febdb0b1 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 29 Jul 2008 22:33:38 -0700 Subject: [PATCH 0358/1024] Char: mxser, ratelimit ioctl warning The GET_MAJOR ioctl prints out a warning, make it ratelimited. Signed-off-by: Jiri Slaby Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/mxser.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index e30575e8764..b638403e8e9 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -1612,8 +1612,10 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) switch (cmd) { case MOXA_GET_MAJOR: - printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl %x, fix " - "your userspace\n", current->comm, cmd); + if (printk_ratelimit()) + printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl " + "%x (GET_MAJOR), fix your userspace\n", + current->comm, cmd); return put_user(ttymajor, (int __user *)argp); case MOXA_CHKPORTENABLE: -- GitLab From 641de9d8f505db055d451b50e6e38117f84e79bb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Tue, 29 Jul 2008 22:33:38 -0700 Subject: [PATCH 0359/1024] printk: fix comment for printk ratelimiting MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The comment assumed the burst to be one and the ratelimit used to be named printk_ratelimit_jiffies. Signed-off-by: Uwe Kleine-König Cc: Dave Young Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/printk.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/kernel/printk.c b/kernel/printk.c index a7f7559c5f6..b51b1567bb5 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1309,14 +1309,14 @@ void tty_write_message(struct tty_struct *tty, char *msg) #if defined CONFIG_PRINTK -DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10); /* * printk rate limiting, lifted from the networking subsystem. * - * This enforces a rate limit: not more than one kernel message - * every printk_ratelimit_jiffies to make a denial-of-service - * attack impossible. + * This enforces a rate limit: not more than 10 kernel messages + * every 5s to make a denial-of-service attack impossible. */ +DEFINE_RATELIMIT_STATE(printk_ratelimit_state, 5 * HZ, 10); + int printk_ratelimit(void) { return __ratelimit(&printk_ratelimit_state); -- GitLab From 7e6cbea39aaa32480145915751119227f29f6f7b Mon Sep 17 00:00:00 2001 From: Fernando Luis Vazquez Cao Date: Tue, 29 Jul 2008 22:33:39 -0700 Subject: [PATCH 0360/1024] madvise: update function comment of madvise_dontneed Signed-off-by: Fernando Luis Vazquez Cao Cc: Hugh Dickins Cc: Nick Piggin Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/madvise.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/madvise.c b/mm/madvise.c index 23a0ec3e0ea..f9349c18a1b 100644 --- a/mm/madvise.c +++ b/mm/madvise.c @@ -132,10 +132,10 @@ static long madvise_willneed(struct vm_area_struct * vma, * Application no longer needs these pages. If the pages are dirty, * it's OK to just throw them away. The app will be more careful about * data it wants to keep. Be sure to free swap resources too. The - * zap_page_range call sets things up for refill_inactive to actually free + * zap_page_range call sets things up for shrink_active_list to actually free * these pages later if no one else has touched them in the meantime, * although we could add these pages to a global reuse list for - * refill_inactive to pick up before reclaiming other pages. + * shrink_active_list to pick up before reclaiming other pages. * * NB: This interface discards data rather than pushes it out to swap, * as some implementations do. This has performance implications for -- GitLab From ab33dc09a5c0d2bd6757afa1c2f804c9657daec0 Mon Sep 17 00:00:00 2001 From: Fernando Luis Vazquez Cao Date: Tue, 29 Jul 2008 22:33:40 -0700 Subject: [PATCH 0361/1024] swap: update function comment of release_pages Signed-off-by: Fernando Luis Vazquez Cao Cc: Hugh Dickins Cc: Nick Piggin Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/swap.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/mm/swap.c b/mm/swap.c index dd89234ee51..7417a2adbe5 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -278,9 +278,10 @@ int lru_add_drain_all(void) * Avoid taking zone->lru_lock if possible, but if it is taken, retain it * for the remainder of the operation. * - * The locking in this function is against shrink_cache(): we recheck the - * page count inside the lock to see whether shrink_cache grabbed the page - * via the LRU. If it did, give up: shrink_cache will free it. + * The locking in this function is against shrink_inactive_list(): we recheck + * the page count inside the lock to see whether shrink_inactive_list() + * grabbed the page via the LRU. If it did, give up: shrink_inactive_list() + * will free it. */ void release_pages(struct page **pages, int nr, int cold) { -- GitLab From 7d03431cf98aaed635524024273668bb8cedadda Mon Sep 17 00:00:00 2001 From: Fernando Luis Vazquez Cao Date: Tue, 29 Jul 2008 22:33:41 -0700 Subject: [PATCH 0362/1024] swapfile/vmscan: update comments related to vmscan functions Signed-off-by: Fernando Luis Vazquez Cao Cc: Hugh Dickins Cc: Nick Piggin Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/swapfile.c | 4 ++-- mm/vmscan.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/swapfile.c b/mm/swapfile.c index 6beb6251e99..bb7f79641f9 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -656,8 +656,8 @@ static int unuse_mm(struct mm_struct *mm, if (!down_read_trylock(&mm->mmap_sem)) { /* - * Activate page so shrink_cache is unlikely to unmap its - * ptes while lock is dropped, so swapoff can make progress. + * Activate page so shrink_inactive_list is unlikely to unmap + * its ptes while lock is dropped, so swapoff can make progress. */ activate_page(page); unlock_page(page); diff --git a/mm/vmscan.c b/mm/vmscan.c index 8f71761bc4b..48ffb13f0d0 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1979,7 +1979,7 @@ module_init(kswapd_init) int zone_reclaim_mode __read_mostly; #define RECLAIM_OFF 0 -#define RECLAIM_ZONE (1<<0) /* Run shrink_cache on the zone */ +#define RECLAIM_ZONE (1<<0) /* Run shrink_inactive_list on the zone */ #define RECLAIM_WRITE (1<<1) /* Writeout pages during reclaim */ #define RECLAIM_SWAP (1<<2) /* Swap pages out during reclaim */ -- GitLab From 87547ee95d81ec0ee1503fcaf9c9594469bc2510 Mon Sep 17 00:00:00 2001 From: Fernando Luis Vazquez Cao Date: Tue, 29 Jul 2008 22:33:42 -0700 Subject: [PATCH 0363/1024] do_try_to_free_page: update comments related to vmscan functions Signed-off-by: Fernando Luis Vazquez Cao Cc: Hugh Dickins Cc: Nick Piggin Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index 48ffb13f0d0..75be453628b 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1408,7 +1408,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist, if (sc->nr_scanned && priority < DEF_PRIORITY - 2) congestion_wait(WRITE, HZ/10); } - /* top priority shrink_caches still had more to do? don't OOM, then */ + /* top priority shrink_zones still had more to do? don't OOM, then */ if (!sc->all_unreclaimable && scan_global_lru(sc)) ret = nr_reclaimed; out: -- GitLab From 204b885e7322656284626949e51f292fe61313fa Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 29 Jul 2008 22:33:42 -0700 Subject: [PATCH 0364/1024] introduce lower_32_bits() macro The file kernel.h contains the upper_32_bits macro. This patch adds the other part, the lower_32_bits macro. Its first use will be in the driver for AMD IOMMU. Cc: H. Peter Anvin Signed-off-by: Joerg Roedel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/kernel.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index fdbbf72ca2e..aaa998f65c7 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -75,6 +75,12 @@ extern const char linux_proc_banner[]; */ #define upper_32_bits(n) ((u32)(((n) >> 16) >> 16)) +/** + * lower_32_bits - return bits 0-31 of a number + * @n: the number we're accessing + */ +#define lower_32_bits(n) ((u32)(n)) + #define KERN_EMERG "<0>" /* system is unusable */ #define KERN_ALERT "<1>" /* action must be taken immediately */ #define KERN_CRIT "<2>" /* critical conditions */ -- GitLab From 836e4b14b41d19d17341a2dd2c49af8dd54e3aac Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 29 Jul 2008 22:33:43 -0700 Subject: [PATCH 0365/1024] USB: m66592-udc: Fix up dev_set_name() badness. Commit 0031a06e2f07ab0d1bc98c31dbb6801f95f4bf01 converted all of the USB drivers to use dev_set_name(), though there was a typo on the m66592-udc conversion that handed off the wrong pointer (we want the struct device here obviously, not the struct usb_gadget). Signed-off-by: Paul Mundt Cc: Kay Sievers Cc: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/usb/gadget/m66592-udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 8da7535c0c7..77b44fb48f0 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -1593,7 +1593,7 @@ static int __init m66592_probe(struct platform_device *pdev) m66592->gadget.ops = &m66592_gadget_ops; device_initialize(&m66592->gadget.dev); - dev_set_name(&m66592->gadget, "gadget"); + dev_set_name(&m66592->gadget.dev, "gadget"); m66592->gadget.is_dualspeed = 1; m66592->gadget.dev.parent = &pdev->dev; m66592->gadget.dev.dma_mask = pdev->dev.dma_mask; -- GitLab From 07a887d399b84668bc26cd040d699b26ec3086c2 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 29 Jul 2008 22:33:44 -0700 Subject: [PATCH 0366/1024] remove drivers/serial/v850e_uart.c The removal of drivers/serial/v850e_uart.c originally was in my v850 removal patch, but it seems it got lost somewhere. Reported-by: Robert P. J. Day Signed-off-by: Adrian Bunk Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/Makefile | 1 - drivers/serial/v850e_uart.c | 548 ------------------------------------ 2 files changed, 549 deletions(-) delete mode 100644 drivers/serial/v850e_uart.c diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 3a0bbbe17aa..7e7383e890d 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -42,7 +42,6 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o obj-$(CONFIG_SERIAL_68360) += 68360serial.o obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o obj-$(CONFIG_SERIAL_MCF) += mcf.o -obj-$(CONFIG_V850E_UART) += v850e_uart.o obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o obj-$(CONFIG_SERIAL_DZ) += dz.o diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c deleted file mode 100644 index 5acf061b6cd..00000000000 --- a/drivers/serial/v850e_uart.c +++ /dev/null @@ -1,548 +0,0 @@ -/* - * drivers/serial/v850e_uart.c -- Serial I/O using V850E on-chip UART or UARTB - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader - */ - -/* This driver supports both the original V850E UART interface (called - merely `UART' in the docs) and the newer `UARTB' interface, which is - roughly a superset of the first one. The selection is made at - configure time -- if CONFIG_V850E_UARTB is defined, then UARTB is - presumed, otherwise the old UART -- as these are on-CPU UARTS, a system - can never have both. - - The UARTB interface also has a 16-entry FIFO mode, which is not - yet supported by this driver. */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -/* Initial UART state. This may be overridden by machine-dependent headers. */ -#ifndef V850E_UART_INIT_BAUD -#define V850E_UART_INIT_BAUD 115200 -#endif -#ifndef V850E_UART_INIT_CFLAGS -#define V850E_UART_INIT_CFLAGS (B115200 | CS8 | CREAD) -#endif - -/* A string used for prefixing printed descriptions; since the same UART - macro is actually used on other chips than the V850E. This must be a - constant string. */ -#ifndef V850E_UART_CHIP_NAME -#define V850E_UART_CHIP_NAME "V850E" -#endif - -#define V850E_UART_MINOR_BASE 64 /* First tty minor number */ - - -/* Low-level UART functions. */ - -/* Configure and turn on uart channel CHAN, using the termios `control - modes' bits in CFLAGS, and a baud-rate of BAUD. */ -void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud) -{ - int flags; - v850e_uart_speed_t old_speed; - v850e_uart_config_t old_config; - v850e_uart_speed_t new_speed = v850e_uart_calc_speed (baud); - v850e_uart_config_t new_config = v850e_uart_calc_config (cflags); - - /* Disable interrupts while we're twiddling the hardware. */ - local_irq_save (flags); - -#ifdef V850E_UART_PRE_CONFIGURE - V850E_UART_PRE_CONFIGURE (chan, cflags, baud); -#endif - - old_config = V850E_UART_CONFIG (chan); - old_speed = v850e_uart_speed (chan); - - if (! v850e_uart_speed_eq (old_speed, new_speed)) { - /* The baud rate has changed. First, disable the UART. */ - V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_FINI; - old_config = 0; /* Force the uart to be re-initialized. */ - - /* Reprogram the baud-rate generator. */ - v850e_uart_set_speed (chan, new_speed); - } - - if (! (old_config & V850E_UART_CONFIG_ENABLED)) { - /* If we are using the uart for the first time, start by - enabling it, which must be done before turning on any - other bits. */ - V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_INIT; - /* See the initial state. */ - old_config = V850E_UART_CONFIG (chan); - } - - if (new_config != old_config) { - /* Which of the TXE/RXE bits we'll temporarily turn off - before changing other control bits. */ - unsigned temp_disable = 0; - /* Which of the TXE/RXE bits will be enabled. */ - unsigned enable = 0; - unsigned changed_bits = new_config ^ old_config; - - /* Which of RX/TX will be enabled in the new configuration. */ - if (new_config & V850E_UART_CONFIG_RX_BITS) - enable |= (new_config & V850E_UART_CONFIG_RX_ENABLE); - if (new_config & V850E_UART_CONFIG_TX_BITS) - enable |= (new_config & V850E_UART_CONFIG_TX_ENABLE); - - /* Figure out which of RX/TX needs to be disabled; note - that this will only happen if they're not already - disabled. */ - if (changed_bits & V850E_UART_CONFIG_RX_BITS) - temp_disable - |= (old_config & V850E_UART_CONFIG_RX_ENABLE); - if (changed_bits & V850E_UART_CONFIG_TX_BITS) - temp_disable - |= (old_config & V850E_UART_CONFIG_TX_ENABLE); - - /* We have to turn off RX and/or TX mode before changing - any associated control bits. */ - if (temp_disable) - V850E_UART_CONFIG (chan) = old_config & ~temp_disable; - - /* Write the new control bits, while RX/TX are disabled. */ - if (changed_bits & ~enable) - V850E_UART_CONFIG (chan) = new_config & ~enable; - - v850e_uart_config_delay (new_config, new_speed); - - /* Write the final version, with enable bits turned on. */ - V850E_UART_CONFIG (chan) = new_config; - } - - local_irq_restore (flags); -} - - -/* Low-level console. */ - -#ifdef CONFIG_V850E_UART_CONSOLE - -static void v850e_uart_cons_write (struct console *co, - const char *s, unsigned count) -{ - if (count > 0) { - unsigned chan = co->index; - unsigned irq = V850E_UART_TX_IRQ (chan); - int irq_was_enabled, irq_was_pending, flags; - - /* We don't want to get `transmission completed' - interrupts, since we're busy-waiting, so we disable them - while sending (we don't disable interrupts entirely - because sending over a serial line is really slow). We - save the status of the tx interrupt and restore it when - we're done so that using printk doesn't interfere with - normal serial transmission (other than interleaving the - output, of course!). This should work correctly even if - this function is interrupted and the interrupt printks - something. */ - - /* Disable interrupts while fiddling with tx interrupt. */ - local_irq_save (flags); - /* Get current tx interrupt status. */ - irq_was_enabled = v850e_intc_irq_enabled (irq); - irq_was_pending = v850e_intc_irq_pending (irq); - /* Disable tx interrupt if necessary. */ - if (irq_was_enabled) - v850e_intc_disable_irq (irq); - /* Turn interrupts back on. */ - local_irq_restore (flags); - - /* Send characters. */ - while (count > 0) { - int ch = *s++; - - if (ch == '\n') { - /* We don't have the benefit of a tty - driver, so translate NL into CR LF. */ - v850e_uart_wait_for_xmit_ok (chan); - v850e_uart_putc (chan, '\r'); - } - - v850e_uart_wait_for_xmit_ok (chan); - v850e_uart_putc (chan, ch); - - count--; - } - - /* Restore saved tx interrupt status. */ - if (irq_was_enabled) { - /* Wait for the last character we sent to be - completely transmitted (as we'll get an - interrupt interrupt at that point). */ - v850e_uart_wait_for_xmit_done (chan); - /* Clear pending interrupts received due - to our transmission, unless there was already - one pending, in which case we want the - handler to be called. */ - if (! irq_was_pending) - v850e_intc_clear_pending_irq (irq); - /* ... and then turn back on handling. */ - v850e_intc_enable_irq (irq); - } - } -} - -extern struct uart_driver v850e_uart_driver; -static struct console v850e_uart_cons = -{ - .name = "ttyS", - .write = v850e_uart_cons_write, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .cflag = V850E_UART_INIT_CFLAGS, - .index = -1, - .data = &v850e_uart_driver, -}; - -void v850e_uart_cons_init (unsigned chan) -{ - v850e_uart_configure (chan, V850E_UART_INIT_CFLAGS, - V850E_UART_INIT_BAUD); - v850e_uart_cons.index = chan; - register_console (&v850e_uart_cons); - printk ("Console: %s on-chip UART channel %d\n", - V850E_UART_CHIP_NAME, chan); -} - -/* This is what the init code actually calls. */ -static int v850e_uart_console_init (void) -{ - v850e_uart_cons_init (V850E_UART_CONSOLE_CHANNEL); - return 0; -} -console_initcall(v850e_uart_console_init); - -#define V850E_UART_CONSOLE &v850e_uart_cons - -#else /* !CONFIG_V850E_UART_CONSOLE */ -#define V850E_UART_CONSOLE 0 -#endif /* CONFIG_V850E_UART_CONSOLE */ - -/* TX/RX interrupt handlers. */ - -static void v850e_uart_stop_tx (struct uart_port *port); - -void v850e_uart_tx (struct uart_port *port) -{ - struct circ_buf *xmit = &port->info->xmit; - int stopped = uart_tx_stopped (port); - - if (v850e_uart_xmit_ok (port->line)) { - int tx_ch; - - if (port->x_char) { - tx_ch = port->x_char; - port->x_char = 0; - } else if (!uart_circ_empty (xmit) && !stopped) { - tx_ch = xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - } else - goto no_xmit; - - v850e_uart_putc (port->line, tx_ch); - port->icount.tx++; - - if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS) - uart_write_wakeup (port); - } - - no_xmit: - if (uart_circ_empty (xmit) || stopped) - v850e_uart_stop_tx (port, stopped); -} - -static irqreturn_t v850e_uart_tx_irq(int irq, void *data) -{ - struct uart_port *port = data; - v850e_uart_tx (port); - return IRQ_HANDLED; -} - -static irqreturn_t v850e_uart_rx_irq(int irq, void *data) -{ - struct uart_port *port = data; - unsigned ch_stat = TTY_NORMAL; - unsigned ch = v850e_uart_getc (port->line); - unsigned err = v850e_uart_err (port->line); - - if (err) { - if (err & V850E_UART_ERR_OVERRUN) { - ch_stat = TTY_OVERRUN; - port->icount.overrun++; - } else if (err & V850E_UART_ERR_FRAME) { - ch_stat = TTY_FRAME; - port->icount.frame++; - } else if (err & V850E_UART_ERR_PARITY) { - ch_stat = TTY_PARITY; - port->icount.parity++; - } - } - - port->icount.rx++; - - tty_insert_flip_char (port->info->port.tty, ch, ch_stat); - tty_schedule_flip (port->info->port.tty); - - return IRQ_HANDLED; -} - - -/* Control functions for the serial framework. */ - -static void v850e_uart_nop (struct uart_port *port) { } -static int v850e_uart_success (struct uart_port *port) { return 0; } - -static unsigned v850e_uart_tx_empty (struct uart_port *port) -{ - return TIOCSER_TEMT; /* Can't detect. */ -} - -static void v850e_uart_set_mctrl (struct uart_port *port, unsigned mctrl) -{ -#ifdef V850E_UART_SET_RTS - V850E_UART_SET_RTS (port->line, (mctrl & TIOCM_RTS)); -#endif -} - -static unsigned v850e_uart_get_mctrl (struct uart_port *port) -{ - /* We don't support DCD or DSR, so consider them permanently active. */ - int mctrl = TIOCM_CAR | TIOCM_DSR; - - /* We may support CTS. */ -#ifdef V850E_UART_CTS - mctrl |= V850E_UART_CTS(port->line) ? TIOCM_CTS : 0; -#else - mctrl |= TIOCM_CTS; -#endif - - return mctrl; -} - -static void v850e_uart_start_tx (struct uart_port *port) -{ - v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line)); - v850e_uart_tx (port); - v850e_intc_enable_irq (V850E_UART_TX_IRQ (port->line)); -} - -static void v850e_uart_stop_tx (struct uart_port *port) -{ - v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line)); -} - -static void v850e_uart_start_rx (struct uart_port *port) -{ - v850e_intc_enable_irq (V850E_UART_RX_IRQ (port->line)); -} - -static void v850e_uart_stop_rx (struct uart_port *port) -{ - v850e_intc_disable_irq (V850E_UART_RX_IRQ (port->line)); -} - -static void v850e_uart_break_ctl (struct uart_port *port, int break_ctl) -{ - /* Umm, do this later. */ -} - -static int v850e_uart_startup (struct uart_port *port) -{ - int err; - - /* Alloc RX irq. */ - err = request_irq (V850E_UART_RX_IRQ (port->line), v850e_uart_rx_irq, - IRQF_DISABLED, "v850e_uart", port); - if (err) - return err; - - /* Alloc TX irq. */ - err = request_irq (V850E_UART_TX_IRQ (port->line), v850e_uart_tx_irq, - IRQF_DISABLED, "v850e_uart", port); - if (err) { - free_irq (V850E_UART_RX_IRQ (port->line), port); - return err; - } - - v850e_uart_start_rx (port); - - return 0; -} - -static void v850e_uart_shutdown (struct uart_port *port) -{ - /* Disable port interrupts. */ - free_irq (V850E_UART_TX_IRQ (port->line), port); - free_irq (V850E_UART_RX_IRQ (port->line), port); - - /* Turn off xmit/recv enable bits. */ - V850E_UART_CONFIG (port->line) - &= ~(V850E_UART_CONFIG_TX_ENABLE - | V850E_UART_CONFIG_RX_ENABLE); - /* Then reset the channel. */ - V850E_UART_CONFIG (port->line) = 0; -} - -static void -v850e_uart_set_termios (struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - unsigned cflags = termios->c_cflag; - - /* Restrict flags to legal values. */ - if ((cflags & CSIZE) != CS7 && (cflags & CSIZE) != CS8) - /* The new value of CSIZE is invalid, use the old value. */ - cflags = (cflags & ~CSIZE) - | (old ? (old->c_cflag & CSIZE) : CS8); - - termios->c_cflag = cflags; - - v850e_uart_configure (port->line, cflags, - uart_get_baud_rate (port, termios, old, - v850e_uart_min_baud(), - v850e_uart_max_baud())); -} - -static const char *v850e_uart_type (struct uart_port *port) -{ - return port->type == PORT_V850E_UART ? "v850e_uart" : 0; -} - -static void v850e_uart_config_port (struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) - port->type = PORT_V850E_UART; -} - -static int -v850e_uart_verify_port (struct uart_port *port, struct serial_struct *ser) -{ - if (ser->type != PORT_UNKNOWN && ser->type != PORT_V850E_UART) - return -EINVAL; - if (ser->irq != V850E_UART_TX_IRQ (port->line)) - return -EINVAL; - return 0; -} - -static struct uart_ops v850e_uart_ops = { - .tx_empty = v850e_uart_tx_empty, - .get_mctrl = v850e_uart_get_mctrl, - .set_mctrl = v850e_uart_set_mctrl, - .start_tx = v850e_uart_start_tx, - .stop_tx = v850e_uart_stop_tx, - .stop_rx = v850e_uart_stop_rx, - .enable_ms = v850e_uart_nop, - .break_ctl = v850e_uart_break_ctl, - .startup = v850e_uart_startup, - .shutdown = v850e_uart_shutdown, - .set_termios = v850e_uart_set_termios, - .type = v850e_uart_type, - .release_port = v850e_uart_nop, - .request_port = v850e_uart_success, - .config_port = v850e_uart_config_port, - .verify_port = v850e_uart_verify_port, -}; - -/* Initialization and cleanup. */ - -static struct uart_driver v850e_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "v850e_uart", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = V850E_UART_MINOR_BASE, - .nr = V850E_UART_NUM_CHANNELS, - .cons = V850E_UART_CONSOLE, -}; - - -static struct uart_port v850e_uart_ports[V850E_UART_NUM_CHANNELS]; - -static int __init v850e_uart_init (void) -{ - int rval; - - printk (KERN_INFO "%s on-chip UART\n", V850E_UART_CHIP_NAME); - - rval = uart_register_driver (&v850e_uart_driver); - if (rval == 0) { - unsigned chan; - - for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) { - struct uart_port *port = &v850e_uart_ports[chan]; - - memset (port, 0, sizeof *port); - - port->ops = &v850e_uart_ops; - port->line = chan; - port->iotype = UPIO_MEM; - port->flags = UPF_BOOT_AUTOCONF; - - /* We actually use multiple IRQs, but the serial - framework seems to mainly use this for - informational purposes anyway. Here we use the TX - irq. */ - port->irq = V850E_UART_TX_IRQ (chan); - - /* The serial framework doesn't really use these - membase/mapbase fields for anything useful, but - it requires that they be something non-zero to - consider the port `valid', and also uses them - for informational purposes. */ - port->membase = (void *)V850E_UART_BASE_ADDR (chan); - port->mapbase = V850E_UART_BASE_ADDR (chan); - - /* The framework insists on knowing the uart's master - clock freq, though it doesn't seem to do anything - useful for us with it. We must make it at least - higher than (the maximum baud rate * 16), otherwise - the framework will puke during its internal - calculations, and force the baud rate to be 9600. - To be accurate though, just repeat the calculation - we use when actually setting the speed. */ - port->uartclk = v850e_uart_max_clock() * 16; - - uart_add_one_port (&v850e_uart_driver, port); - } - } - - return rval; -} - -static void __exit v850e_uart_exit (void) -{ - unsigned chan; - - for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) - uart_remove_one_port (&v850e_uart_driver, - &v850e_uart_ports[chan]); - - uart_unregister_driver (&v850e_uart_driver); -} - -module_init (v850e_uart_init); -module_exit (v850e_uart_exit); - -MODULE_AUTHOR ("Miles Bader"); -MODULE_DESCRIPTION ("NEC " V850E_UART_CHIP_NAME " on-chip UART"); -MODULE_LICENSE ("GPL"); -- GitLab From 32be1d22327743134974c7b2ec1e2a143b6b6f86 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 29 Jul 2008 22:33:44 -0700 Subject: [PATCH 0367/1024] scripts/mod/modpost.c: fix spelling of module and happens Spelling fixes in scripts/mod/modpost.c Signed-off-by: Ben Dooks Cc: Rusty Russell Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/mod/modpost.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 8f038e6d5f9..418cd7dbbc9 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1468,7 +1468,7 @@ static void section_rel(const char *modname, struct elf_info *elf, * marked __initdata will be discarded when the module has been intialized. * Likewise for modules used built-in the sections marked __exit * are discarded because __exit marked function are supposed to be called - * only when a moduel is unloaded which never happes for built-in modules. + * only when a module is unloaded which never happens for built-in modules. * The check_sec_ref() function traverses all relocation records * to find all references to a section that reference a section that will * be discarded and warns about it. -- GitLab From d406f66ddb0d7491ddd53e4600c425d76a8a245f Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Tue, 29 Jul 2008 22:33:46 -0700 Subject: [PATCH 0368/1024] omfs: sparse annotations Missing cpu_to_be64 on some constant assignments. fs/omfs/dir.c:107:16: warning: incorrect type in assignment (different base types) fs/omfs/dir.c:107:16: expected restricted __be64 [usertype] i_sibling fs/omfs/dir.c:107:16: got unsigned long long fs/omfs/file.c:33:13: warning: incorrect type in assignment (different base types) fs/omfs/file.c:33:13: expected restricted __be64 [usertype] e_next fs/omfs/file.c:33:13: got unsigned long long fs/omfs/file.c:36:24: warning: incorrect type in assignment (different base types) fs/omfs/file.c:36:24: expected restricted __be64 [usertype] e_cluster fs/omfs/file.c:36:24: got unsigned long long fs/omfs/file.c:37:23: warning: incorrect type in assignment (different base types) fs/omfs/file.c:37:23: expected restricted __be64 [usertype] e_blocks fs/omfs/file.c:37:23: got unsigned long long fs/omfs/bitmap.c:74:18: warning: incorrect type in argument 2 (different signedness) fs/omfs/bitmap.c:74:18: expected unsigned long volatile *addr fs/omfs/bitmap.c:74:18: got long * fs/omfs/bitmap.c:77:20: warning: incorrect type in argument 2 (different signedness) fs/omfs/bitmap.c:77:20: expected unsigned long volatile *addr fs/omfs/bitmap.c:77:20: got long * fs/omfs/bitmap.c:112:17: warning: incorrect type in argument 2 (different signedness) fs/omfs/bitmap.c:112:17: expected unsigned long volatile *addr fs/omfs/bitmap.c:112:17: got long * Signed-off-by: Harvey Harrison Acked-by: Bob Copeland Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/omfs/bitmap.c | 6 +++--- fs/omfs/dir.c | 2 +- fs/omfs/file.c | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/omfs/bitmap.c b/fs/omfs/bitmap.c index dc75f22be3f..697663b01ba 100644 --- a/fs/omfs/bitmap.c +++ b/fs/omfs/bitmap.c @@ -71,10 +71,10 @@ static int set_run(struct super_block *sb, int map, } if (set) { set_bit(bit, sbi->s_imap[map]); - set_bit(bit, (long *) bh->b_data); + set_bit(bit, (unsigned long *)bh->b_data); } else { clear_bit(bit, sbi->s_imap[map]); - clear_bit(bit, (long *) bh->b_data); + clear_bit(bit, (unsigned long *)bh->b_data); } } mark_buffer_dirty(bh); @@ -109,7 +109,7 @@ int omfs_allocate_block(struct super_block *sb, u64 block) if (!bh) goto out; - set_bit(bit, (long *) bh->b_data); + set_bit(bit, (unsigned long *)bh->b_data); mark_buffer_dirty(bh); brelse(bh); } diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c index 05a5bc31e4b..c0757e99887 100644 --- a/fs/omfs/dir.c +++ b/fs/omfs/dir.c @@ -104,7 +104,7 @@ int omfs_make_empty(struct inode *inode, struct super_block *sb) oi = (struct omfs_inode *) bh->b_data; oi->i_head.h_self = cpu_to_be64(inode->i_ino); - oi->i_sibling = ~0ULL; + oi->i_sibling = ~cpu_to_be64(0ULL); mark_buffer_dirty(bh); brelse(bh); diff --git a/fs/omfs/file.c b/fs/omfs/file.c index 66e01fae438..7e2499053e4 100644 --- a/fs/omfs/file.c +++ b/fs/omfs/file.c @@ -30,11 +30,11 @@ void omfs_make_empty_table(struct buffer_head *bh, int offset) { struct omfs_extent *oe = (struct omfs_extent *) &bh->b_data[offset]; - oe->e_next = ~0ULL; + oe->e_next = ~cpu_to_be64(0ULL); oe->e_extent_count = cpu_to_be32(1), oe->e_fill = cpu_to_be32(0x22), - oe->e_entry.e_cluster = ~0ULL; - oe->e_entry.e_blocks = ~0ULL; + oe->e_entry.e_cluster = ~cpu_to_be64(0ULL); + oe->e_entry.e_blocks = ~cpu_to_be64(0ULL); } int omfs_shrink_inode(struct inode *inode) -- GitLab From dbacefc9c4f6bd365243db379473ab7041656d90 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 29 Jul 2008 22:33:47 -0700 Subject: [PATCH 0369/1024] fs/buffer.c: uninline __remove_assoc_queue() Uninline the __remove_assoc_queue() function in fs/buffer.c, called at too many places and too long to really be inlined. Size results: text data bss dec hex filename 1134606 118840 212992 1466438 166046 vmlinux.old 1134303 118840 212992 1466135 165f17 vmlinux -303 0 0 -303 -12F +/- This patch is part of the Linux Tiny project and has been originally written by Matt Mackall . Signed-off-by: Thomas Petazzoni Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/buffer.c b/fs/buffer.c index ca12a6bb82b..4dbe52948e8 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -580,7 +580,7 @@ EXPORT_SYMBOL(mark_buffer_async_write); /* * The buffer's backing address_space's private_lock must be held */ -static inline void __remove_assoc_queue(struct buffer_head *bh) +static void __remove_assoc_queue(struct buffer_head *bh) { list_del_init(&bh->b_assoc_buffers); WARN_ON(!bh->b_assoc_map); -- GitLab From 6af8bf3d86d55c98af6e453cb920ddc30867e5c7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Tue, 29 Jul 2008 22:33:49 -0700 Subject: [PATCH 0370/1024] workqueues: add comments to __create_workqueue_key() Dmitry Adamushko pointed out that the error handling in __create_workqueue_key() is not clear, add the comment. Signed-off-by: Oleg Nesterov Cc: Dmitry Adamushko Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/workqueue.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index ec7e4f62aaf..4a26a1382df 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -830,10 +830,21 @@ struct workqueue_struct *__create_workqueue_key(const char *name, start_workqueue_thread(cwq, -1); } else { cpu_maps_update_begin(); + /* + * We must place this wq on list even if the code below fails. + * cpu_down(cpu) can remove cpu from cpu_populated_map before + * destroy_workqueue() takes the lock, in that case we leak + * cwq[cpu]->thread. + */ spin_lock(&workqueue_lock); list_add(&wq->list, &workqueues); spin_unlock(&workqueue_lock); - + /* + * We must initialize cwqs for each possible cpu even if we + * are going to call destroy_workqueue() finally. Otherwise + * cpu_up() can hit the uninitialized cwq once we drop the + * lock. + */ for_each_possible_cpu(cpu) { cwq = init_cpu_workqueue(wq, cpu); if (err || !cpu_online(cpu)) -- GitLab From 8d0b1c51eb8375f88c0886d2e9f71881e19d42a7 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 29 Jul 2008 22:33:49 -0700 Subject: [PATCH 0371/1024] gbefb: cmap FIFO timeout Writes to the cmap fifo while the display is blanked caused cmap FIFO timeout messages and a wrong colormap. To avoid this the driver now maintains a colormap in memory and updates the colormap after the display is unblanked. Signed-off-by: Thomas Bogendoerfer Cc: Krzysztof Helt Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/gbefb.c | 50 +++++++++++++++++++++++++++++-------------- 1 file changed, 34 insertions(+), 16 deletions(-) diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index 2e552d5bbb5..f89c3cce1e0 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -87,6 +87,8 @@ static int gbe_revision; static int ypan, ywrap; static uint32_t pseudo_palette[16]; +static uint32_t gbe_cmap[256]; +static int gbe_turned_on; /* 0 turned off, 1 turned on */ static char *mode_option __initdata = NULL; @@ -208,6 +210,8 @@ void gbe_turn_off(void) int i; unsigned int val, x, y, vpixen_off; + gbe_turned_on = 0; + /* check if pixel counter is on */ val = gbe->vt_xy; if (GET_GBE_FIELD(VT_XY, FREEZE, val) == 1) @@ -371,6 +375,22 @@ static void gbe_turn_on(void) } if (i == 10000) printk(KERN_ERR "gbefb: turn on DMA timed out\n"); + + gbe_turned_on = 1; +} + +static void gbe_loadcmap(void) +{ + int i, j; + + for (i = 0; i < 256; i++) { + for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++) + udelay(10); + if (j == 1000) + printk(KERN_ERR "gbefb: cmap FIFO timeout\n"); + + gbe->cmap[i] = gbe_cmap[i]; + } } /* @@ -382,6 +402,7 @@ static int gbefb_blank(int blank, struct fb_info *info) switch (blank) { case FB_BLANK_UNBLANK: /* unblank */ gbe_turn_on(); + gbe_loadcmap(); break; case FB_BLANK_NORMAL: /* blank */ @@ -796,16 +817,10 @@ static int gbefb_set_par(struct fb_info *info) gbe->gmap[i] = (i << 24) | (i << 16) | (i << 8); /* Initialize the color map */ - for (i = 0; i < 256; i++) { - int j; - - for (j = 0; j < 1000 && gbe->cm_fifo >= 63; j++) - udelay(10); - if (j == 1000) - printk(KERN_ERR "gbefb: cmap FIFO timeout\n"); + for (i = 0; i < 256; i++) + gbe_cmap[i] = (i << 8) | (i << 16) | (i << 24); - gbe->cmap[i] = (i << 8) | (i << 16) | (i << 24); - } + gbe_loadcmap(); return 0; } @@ -855,14 +870,17 @@ static int gbefb_setcolreg(unsigned regno, unsigned red, unsigned green, blue >>= 8; if (info->var.bits_per_pixel <= 8) { - /* wait for the color map FIFO to have a free entry */ - for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++) - udelay(10); - if (i == 1000) { - printk(KERN_ERR "gbefb: cmap FIFO timeout\n"); - return 1; + gbe_cmap[regno] = (red << 24) | (green << 16) | (blue << 8); + if (gbe_turned_on) { + /* wait for the color map FIFO to have a free entry */ + for (i = 0; i < 1000 && gbe->cm_fifo >= 63; i++) + udelay(10); + if (i == 1000) { + printk(KERN_ERR "gbefb: cmap FIFO timeout\n"); + return 1; + } + gbe->cmap[regno] = gbe_cmap[regno]; } - gbe->cmap[regno] = (red << 24) | (green << 16) | (blue << 8); } else if (regno < 16) { switch (info->var.bits_per_pixel) { case 15: -- GitLab From 5cdc98b8f51310f7cca05ad780f18f80dd9571de Mon Sep 17 00:00:00 2001 From: Tomas Janousek Date: Tue, 29 Jul 2008 22:33:51 -0700 Subject: [PATCH 0372/1024] rtc-dev: stop periodic interrupts on device release Solves http://bugzilla.kernel.org/show_bug.cgi?id=11127 The old rtc.c driver did it and some drivers (like rtc-sh) do it in their release function, though they should not -- because they should provide the irq_set_state op and the rtc framework itself should care about it. This patch makes it do so. I am aware that some drivers, like rtc-sh, handle userspace PIE sets in their ioctl op (instead of having the framework call the op), exporting the irq_set_state op at the same time. The logic in rtc_irq_set_state should make sure it doesn't matter and the driver should not need to care stopping periodic interrupts in its release routine any more. The correct way, in my opinion, should be this: 1) The driver provides the irq_set_state op and does not care closing the interrupts in its release op. 2) If the driver does not provide the op and handles PIE in the ioctl op, it's reponsible for closing them in its release op. 3) Something similar for other IRQs, like UIE -- if there's no in-kernel API like irq_set_state, handle it in ioctl and release ops. The framework will be responsible either for everything or for nothing. (This will probably change later.) Signed-off-by: Tomas Janousek Acked-by: David Brownell Acked-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-dev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c index ae3bd4de767..856cc1af40d 100644 --- a/drivers/rtc/rtc-dev.c +++ b/drivers/rtc/rtc-dev.c @@ -432,6 +432,8 @@ static int rtc_dev_release(struct inode *inode, struct file *file) #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL clear_uie(rtc); #endif + rtc_irq_set_state(rtc, NULL, 0); + if (rtc->ops->release) rtc->ops->release(rtc->dev.parent); -- GitLab From f718cd4add5aea9d379faff92f162571e356cc5f Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 29 Jul 2008 22:33:52 -0700 Subject: [PATCH 0373/1024] sched: make scheduler sysfs attributes sysdev class devices They are really class devices, but were incorrectly declared. This leads to crashes with the recent changes that makes non normal sysdevs use a different prototype. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Andi Kleen Cc: Ingo Molnar Cc: Pierre Ossman Cc: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/sched.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 0236958addc..21f7da94662 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7671,34 +7671,34 @@ static ssize_t sched_power_savings_store(const char *buf, size_t count, int smt) } #ifdef CONFIG_SCHED_MC -static ssize_t sched_mc_power_savings_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *page) +static ssize_t sched_mc_power_savings_show(struct sysdev_class *class, + char *page) { return sprintf(page, "%u\n", sched_mc_power_savings); } -static ssize_t sched_mc_power_savings_store(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t sched_mc_power_savings_store(struct sysdev_class *class, const char *buf, size_t count) { return sched_power_savings_store(buf, count, 0); } -static SYSDEV_ATTR(sched_mc_power_savings, 0644, sched_mc_power_savings_show, - sched_mc_power_savings_store); +static SYSDEV_CLASS_ATTR(sched_mc_power_savings, 0644, + sched_mc_power_savings_show, + sched_mc_power_savings_store); #endif #ifdef CONFIG_SCHED_SMT -static ssize_t sched_smt_power_savings_show(struct sys_device *dev, - struct sysdev_attribute *attr, char *page) +static ssize_t sched_smt_power_savings_show(struct sysdev_class *dev, + char *page) { return sprintf(page, "%u\n", sched_smt_power_savings); } -static ssize_t sched_smt_power_savings_store(struct sys_device *dev, - struct sysdev_attribute *attr, +static ssize_t sched_smt_power_savings_store(struct sysdev_class *dev, const char *buf, size_t count) { return sched_power_savings_store(buf, count, 1); } -static SYSDEV_ATTR(sched_smt_power_savings, 0644, sched_smt_power_savings_show, +static SYSDEV_CLASS_ATTR(sched_smt_power_savings, 0644, + sched_smt_power_savings_show, sched_smt_power_savings_store); #endif -- GitLab From c627f9cc046c7cd93b4525d89377fb409e170a18 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:33:53 -0700 Subject: [PATCH 0374/1024] mm: add zap_vma_ptes(): a library function to unmap driver ptes zap_vma_ptes() is intended to be used by drivers to unmap ptes assigned to the driver private vmas. This interface is similar to zap_page_range() but is less general & less likely to be abused. Needed by the GRU driver. Signed-off-by: Jack Steiner Cc: Nick Piggin Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm.h | 2 ++ mm/memory.c | 23 +++++++++++++++++++++++ 2 files changed, 25 insertions(+) diff --git a/include/linux/mm.h b/include/linux/mm.h index 5e2c8af4999..335288bff1b 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -744,6 +744,8 @@ struct zap_details { struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr, pte_t pte); +int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address, + unsigned long size); unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address, unsigned long size, struct zap_details *); unsigned long unmap_vmas(struct mmu_gather **tlb, diff --git a/mm/memory.c b/mm/memory.c index 67f0ab9077d..6793b9c6810 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -994,6 +994,29 @@ unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address, return end; } +/** + * zap_vma_ptes - remove ptes mapping the vma + * @vma: vm_area_struct holding ptes to be zapped + * @address: starting address of pages to zap + * @size: number of bytes to zap + * + * This function only unmaps ptes assigned to VM_PFNMAP vmas. + * + * The entire address range must be fully contained within the vma. + * + * Returns 0 if successful. + */ +int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address, + unsigned long size) +{ + if (address < vma->vm_start || address + size > vma->vm_end || + !(vma->vm_flags & VM_PFNMAP)) + return -1; + zap_page_range(vma, address, size, NULL); + return 0; +} +EXPORT_SYMBOL_GPL(zap_vma_ptes); + /* * Do a quick page-table lookup for a single page. */ -- GitLab From 34d8a380d784d1fbea941a68beebdd7f9a3bebdf Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:33:54 -0700 Subject: [PATCH 0375/1024] GRU Driver: hardware data structures This series of patches adds a driver for the SGI UV GRU. The driver is still in development but it currently compiles for both x86_64 & IA64. All simple regression tests pass on IA64. Although features remain to be added, I'd like to start the process of getting the driver into the kernel. Additional kernel drivers will depend on services provide by the GRU driver. The GRU is a hardware resource located in the system chipset. The GRU contains memory that is mmaped into the user address space. This memory is used to communicate with the GRU to perform functions such as load/store, scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user instructions using user virtual addresses. GRU instructions (ex., bcopy) use user virtual addresses for operands. The GRU contains a large TLB that is functionally very similar to processor TLBs. Because the external contains a TLB with user virtual address, it requires callouts from the core VM system when certain types of changes are made to the process page tables. There are several MMUOPS patches currently being discussed but none has been accepted into the kernel. The GRU driver is built using version V18 from Andrea Arcangeli. This patch: Contains the definitions of the hardware GRU data structures that are used by the driver to manage the GRU. [akpm@linux-foundation;org: export hpage_shift] Signed-off-by: Jack Steiner Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ia64/mm/hugetlbpage.c | 4 +- drivers/misc/sgi-gru/gruhandles.h | 663 ++++++++++++++++++++++++++++++ 2 files changed, 666 insertions(+), 1 deletion(-) create mode 100644 drivers/misc/sgi-gru/gruhandles.h diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c index c45fc7f5a97..b0f615759e9 100644 --- a/arch/ia64/mm/hugetlbpage.c +++ b/arch/ia64/mm/hugetlbpage.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -21,7 +22,8 @@ #include #include -unsigned int hpage_shift=HPAGE_SHIFT_DEFAULT; +unsigned int hpage_shift = HPAGE_SHIFT_DEFAULT; +EXPORT_SYMBOL(hpage_shift); pte_t * huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz) diff --git a/drivers/misc/sgi-gru/gruhandles.h b/drivers/misc/sgi-gru/gruhandles.h new file mode 100644 index 00000000000..d16031d6267 --- /dev/null +++ b/drivers/misc/sgi-gru/gruhandles.h @@ -0,0 +1,663 @@ +/* + * SN Platform GRU Driver + * + * GRU HANDLE DEFINITION + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __GRUHANDLES_H__ +#define __GRUHANDLES_H__ +#include "gru_instructions.h" + +/* + * Manifest constants for GRU Memory Map + */ +#define GRU_GSEG0_BASE 0 +#define GRU_MCS_BASE (64 * 1024 * 1024) +#define GRU_SIZE (128UL * 1024 * 1024) + +/* Handle & resource counts */ +#define GRU_NUM_CB 128 +#define GRU_NUM_DSR_BYTES (32 * 1024) +#define GRU_NUM_TFM 16 +#define GRU_NUM_TGH 24 +#define GRU_NUM_CBE 128 +#define GRU_NUM_TFH 128 +#define GRU_NUM_CCH 16 +#define GRU_NUM_GSH 1 + +/* Maximum resource counts that can be reserved by user programs */ +#define GRU_NUM_USER_CBR GRU_NUM_CBE +#define GRU_NUM_USER_DSR_BYTES GRU_NUM_DSR_BYTES + +/* Bytes per handle & handle stride. Code assumes all cb, tfh, cbe handles + * are the same */ +#define GRU_HANDLE_BYTES 64 +#define GRU_HANDLE_STRIDE 256 + +/* Base addresses of handles */ +#define GRU_TFM_BASE (GRU_MCS_BASE + 0x00000) +#define GRU_TGH_BASE (GRU_MCS_BASE + 0x08000) +#define GRU_CBE_BASE (GRU_MCS_BASE + 0x10000) +#define GRU_TFH_BASE (GRU_MCS_BASE + 0x18000) +#define GRU_CCH_BASE (GRU_MCS_BASE + 0x20000) +#define GRU_GSH_BASE (GRU_MCS_BASE + 0x30000) + +/* User gseg constants */ +#define GRU_GSEG_STRIDE (4 * 1024 * 1024) +#define GSEG_BASE(a) ((a) & ~(GRU_GSEG_PAGESIZE - 1)) + +/* Data segment constants */ +#define GRU_DSR_AU_BYTES 1024 +#define GRU_DSR_CL (GRU_NUM_DSR_BYTES / GRU_CACHE_LINE_BYTES) +#define GRU_DSR_AU_CL (GRU_DSR_AU_BYTES / GRU_CACHE_LINE_BYTES) +#define GRU_DSR_AU (GRU_NUM_DSR_BYTES / GRU_DSR_AU_BYTES) + +/* Control block constants */ +#define GRU_CBR_AU_SIZE 2 +#define GRU_CBR_AU (GRU_NUM_CBE / GRU_CBR_AU_SIZE) + +/* Convert resource counts to the number of AU */ +#define GRU_DS_BYTES_TO_AU(n) DIV_ROUND_UP(n, GRU_DSR_AU_BYTES) +#define GRU_CB_COUNT_TO_AU(n) DIV_ROUND_UP(n, GRU_CBR_AU_SIZE) + +/* UV limits */ +#define GRU_CHIPLETS_PER_HUB 2 +#define GRU_HUBS_PER_BLADE 1 +#define GRU_CHIPLETS_PER_BLADE (GRU_HUBS_PER_BLADE * GRU_CHIPLETS_PER_HUB) + +/* User GRU Gseg offsets */ +#define GRU_CB_BASE 0 +#define GRU_CB_LIMIT (GRU_CB_BASE + GRU_HANDLE_STRIDE * GRU_NUM_CBE) +#define GRU_DS_BASE 0x20000 +#define GRU_DS_LIMIT (GRU_DS_BASE + GRU_NUM_DSR_BYTES) + +/* Convert a GRU physical address to the chiplet offset */ +#define GSEGPOFF(h) ((h) & (GRU_SIZE - 1)) + +/* Convert an arbitrary handle address to the beginning of the GRU segment */ +#ifndef __PLUGIN__ +#define GRUBASE(h) ((void *)((unsigned long)(h) & ~(GRU_SIZE - 1))) +#else +extern void *gmu_grubase(void *h); +#define GRUBASE(h) gmu_grubase(h) +#endif + +/* General addressing macros. */ +static inline void *get_gseg_base_address(void *base, int ctxnum) +{ + return (void *)(base + GRU_GSEG0_BASE + GRU_GSEG_STRIDE * ctxnum); +} + +static inline void *get_gseg_base_address_cb(void *base, int ctxnum, int line) +{ + return (void *)(get_gseg_base_address(base, ctxnum) + + GRU_CB_BASE + GRU_HANDLE_STRIDE * line); +} + +static inline void *get_gseg_base_address_ds(void *base, int ctxnum, int line) +{ + return (void *)(get_gseg_base_address(base, ctxnum) + GRU_DS_BASE + + GRU_CACHE_LINE_BYTES * line); +} + +static inline struct gru_tlb_fault_map *get_tfm(void *base, int ctxnum) +{ + return (struct gru_tlb_fault_map *)(base + GRU_TFM_BASE + + ctxnum * GRU_HANDLE_STRIDE); +} + +static inline struct gru_tlb_global_handle *get_tgh(void *base, int ctxnum) +{ + return (struct gru_tlb_global_handle *)(base + GRU_TGH_BASE + + ctxnum * GRU_HANDLE_STRIDE); +} + +static inline struct gru_control_block_extended *get_cbe(void *base, int ctxnum) +{ + return (struct gru_control_block_extended *)(base + GRU_CBE_BASE + + ctxnum * GRU_HANDLE_STRIDE); +} + +static inline struct gru_tlb_fault_handle *get_tfh(void *base, int ctxnum) +{ + return (struct gru_tlb_fault_handle *)(base + GRU_TFH_BASE + + ctxnum * GRU_HANDLE_STRIDE); +} + +static inline struct gru_context_configuration_handle *get_cch(void *base, + int ctxnum) +{ + return (struct gru_context_configuration_handle *)(base + + GRU_CCH_BASE + ctxnum * GRU_HANDLE_STRIDE); +} + +static inline unsigned long get_cb_number(void *cb) +{ + return (((unsigned long)cb - GRU_CB_BASE) % GRU_GSEG_PAGESIZE) / + GRU_HANDLE_STRIDE; +} + +/* byte offset to a specific GRU chiplet. (p=pnode, c=chiplet (0 or 1)*/ +static inline unsigned long gru_chiplet_paddr(unsigned long paddr, int pnode, + int chiplet) +{ + return paddr + GRU_SIZE * (2 * pnode + chiplet); +} + +static inline void *gru_chiplet_vaddr(void *vaddr, int pnode, int chiplet) +{ + return vaddr + GRU_SIZE * (2 * pnode + chiplet); +} + + + +/* + * Global TLB Fault Map + * Bitmap of outstanding TLB misses needing interrupt/polling service. + * + */ +struct gru_tlb_fault_map { + unsigned long fault_bits[BITS_TO_LONGS(GRU_NUM_CBE)]; + unsigned long fill0[2]; + unsigned long done_bits[BITS_TO_LONGS(GRU_NUM_CBE)]; + unsigned long fill1[2]; +}; + +/* + * TGH - TLB Global Handle + * Used for TLB flushing. + * + */ +struct gru_tlb_global_handle { + unsigned int cmd:1; /* DW 0 */ + unsigned int delresp:1; + unsigned int opc:1; + unsigned int fill1:5; + + unsigned int fill2:8; + + unsigned int status:2; + unsigned long fill3:2; + unsigned int state:3; + unsigned long fill4:1; + + unsigned int cause:3; + unsigned long fill5:37; + + unsigned long vaddr:64; /* DW 1 */ + + unsigned int asid:24; /* DW 2 */ + unsigned int fill6:8; + + unsigned int pagesize:5; + unsigned int fill7:11; + + unsigned int global:1; + unsigned int fill8:15; + + unsigned long vaddrmask:39; /* DW 3 */ + unsigned int fill9:9; + unsigned int n:10; + unsigned int fill10:6; + + unsigned int ctxbitmap:16; /* DW4 */ + unsigned long fill11[3]; +}; + +enum gru_tgh_cmd { + TGHCMD_START +}; + +enum gru_tgh_opc { + TGHOP_TLBNOP, + TGHOP_TLBINV +}; + +enum gru_tgh_status { + TGHSTATUS_IDLE, + TGHSTATUS_EXCEPTION, + TGHSTATUS_ACTIVE +}; + +enum gru_tgh_state { + TGHSTATE_IDLE, + TGHSTATE_PE_INVAL, + TGHSTATE_INTERRUPT_INVAL, + TGHSTATE_WAITDONE, + TGHSTATE_RESTART_CTX, +}; + +/* + * TFH - TLB Global Handle + * Used for TLB dropins into the GRU TLB. + * + */ +struct gru_tlb_fault_handle { + unsigned int cmd:1; /* DW 0 - low 32*/ + unsigned int delresp:1; + unsigned int fill0:2; + unsigned int opc:3; + unsigned int fill1:9; + + unsigned int status:2; + unsigned int fill2:1; + unsigned int color:1; + unsigned int state:3; + unsigned int fill3:1; + + unsigned int cause:7; /* DW 0 - high 32 */ + unsigned int fill4:1; + + unsigned int indexway:12; + unsigned int fill5:4; + + unsigned int ctxnum:4; + unsigned int fill6:12; + + unsigned long missvaddr:64; /* DW 1 */ + + unsigned int missasid:24; /* DW 2 */ + unsigned int fill7:8; + unsigned int fillasid:24; + unsigned int dirty:1; + unsigned int gaa:2; + unsigned long fill8:5; + + unsigned long pfn:41; /* DW 3 */ + unsigned int fill9:7; + unsigned int pagesize:5; + unsigned int fill10:11; + + unsigned long fillvaddr:64; /* DW 4 */ + + unsigned long fill11[3]; +}; + +enum gru_tfh_opc { + TFHOP_NOOP, + TFHOP_RESTART, + TFHOP_WRITE_ONLY, + TFHOP_WRITE_RESTART, + TFHOP_EXCEPTION, + TFHOP_USER_POLLING_MODE = 7, +}; + +enum tfh_status { + TFHSTATUS_IDLE, + TFHSTATUS_EXCEPTION, + TFHSTATUS_ACTIVE, +}; + +enum tfh_state { + TFHSTATE_INACTIVE, + TFHSTATE_IDLE, + TFHSTATE_MISS_UPM, + TFHSTATE_MISS_FMM, + TFHSTATE_HW_ERR, + TFHSTATE_WRITE_TLB, + TFHSTATE_RESTART_CBR, +}; + +/* TFH cause bits */ +enum tfh_cause { + TFHCAUSE_NONE, + TFHCAUSE_TLB_MISS, + TFHCAUSE_TLB_MOD, + TFHCAUSE_HW_ERROR_RR, + TFHCAUSE_HW_ERROR_MAIN_ARRAY, + TFHCAUSE_HW_ERROR_VALID, + TFHCAUSE_HW_ERROR_PAGESIZE, + TFHCAUSE_INSTRUCTION_EXCEPTION, + TFHCAUSE_UNCORRECTIBLE_ERROR, +}; + +/* GAA values */ +#define GAA_RAM 0x0 +#define GAA_NCRAM 0x2 +#define GAA_MMIO 0x1 +#define GAA_REGISTER 0x3 + +/* GRU paddr shift for pfn. (NOTE: shift is NOT by actual pagesize) */ +#define GRU_PADDR_SHIFT 12 + +/* + * Context Configuration handle + * Used to allocate resources to a GSEG context. + * + */ +struct gru_context_configuration_handle { + unsigned int cmd:1; /* DW0 */ + unsigned int delresp:1; + unsigned int opc:3; + unsigned int unmap_enable:1; + unsigned int req_slice_set_enable:1; + unsigned int req_slice:2; + unsigned int cb_int_enable:1; + unsigned int tlb_int_enable:1; + unsigned int tfm_fault_bit_enable:1; + unsigned int tlb_int_select:4; + + unsigned int status:2; + unsigned int state:2; + unsigned int reserved2:4; + + unsigned int cause:4; + unsigned int tfm_done_bit_enable:1; + unsigned int unused:3; + + unsigned int dsr_allocation_map; + + unsigned long cbr_allocation_map; /* DW1 */ + + unsigned int asid[8]; /* DW 2 - 5 */ + unsigned short sizeavail[8]; /* DW 6 - 7 */ +} __attribute__ ((packed)); + +enum gru_cch_opc { + CCHOP_START = 1, + CCHOP_ALLOCATE, + CCHOP_INTERRUPT, + CCHOP_DEALLOCATE, + CCHOP_INTERRUPT_SYNC, +}; + +enum gru_cch_status { + CCHSTATUS_IDLE, + CCHSTATUS_EXCEPTION, + CCHSTATUS_ACTIVE, +}; + +enum gru_cch_state { + CCHSTATE_INACTIVE, + CCHSTATE_MAPPED, + CCHSTATE_ACTIVE, + CCHSTATE_INTERRUPTED, +}; + +/* CCH Exception cause */ +enum gru_cch_cause { + CCHCAUSE_REGION_REGISTER_WRITE_ERROR = 1, + CCHCAUSE_ILLEGAL_OPCODE = 2, + CCHCAUSE_INVALID_START_REQUEST = 3, + CCHCAUSE_INVALID_ALLOCATION_REQUEST = 4, + CCHCAUSE_INVALID_DEALLOCATION_REQUEST = 5, + CCHCAUSE_INVALID_INTERRUPT_REQUEST = 6, + CCHCAUSE_CCH_BUSY = 7, + CCHCAUSE_NO_CBRS_TO_ALLOCATE = 8, + CCHCAUSE_BAD_TFM_CONFIG = 9, + CCHCAUSE_CBR_RESOURCES_OVERSUBSCRIPED = 10, + CCHCAUSE_DSR_RESOURCES_OVERSUBSCRIPED = 11, + CCHCAUSE_CBR_DEALLOCATION_ERROR = 12, +}; +/* + * CBE - Control Block Extended + * Maintains internal GRU state for active CBs. + * + */ +struct gru_control_block_extended { + unsigned int reserved0:1; /* DW 0 - low */ + unsigned int imacpy:3; + unsigned int reserved1:4; + unsigned int xtypecpy:3; + unsigned int iaa0cpy:2; + unsigned int iaa1cpy:2; + unsigned int reserved2:1; + unsigned int opccpy:8; + unsigned int exopccpy:8; + + unsigned int idef2cpy:22; /* DW 0 - high */ + unsigned int reserved3:10; + + unsigned int idef4cpy:22; /* DW 1 */ + unsigned int reserved4:10; + unsigned int idef4upd:22; + unsigned int reserved5:10; + + unsigned long idef1upd:64; /* DW 2 */ + + unsigned long idef5cpy:64; /* DW 3 */ + + unsigned long idef6cpy:64; /* DW 4 */ + + unsigned long idef3upd:64; /* DW 5 */ + + unsigned long idef5upd:64; /* DW 6 */ + + unsigned int idef2upd:22; /* DW 7 */ + unsigned int reserved6:10; + + unsigned int ecause:20; + unsigned int cbrstate:4; + unsigned int cbrexecstatus:8; +}; + +enum gru_cbr_state { + CBRSTATE_INACTIVE, + CBRSTATE_IDLE, + CBRSTATE_PE_CHECK, + CBRSTATE_QUEUED, + CBRSTATE_WAIT_RESPONSE, + CBRSTATE_INTERRUPTED, + CBRSTATE_INTERRUPTED_MISS_FMM, + CBRSTATE_BUSY_INTERRUPT_MISS_FMM, + CBRSTATE_INTERRUPTED_MISS_UPM, + CBRSTATE_BUSY_INTERRUPTED_MISS_UPM, + CBRSTATE_REQUEST_ISSUE, + CBRSTATE_BUSY_INTERRUPT, +}; + +/* CBE cbrexecstatus bits */ +#define CBR_EXS_ABORT_OCC_BIT 0 +#define CBR_EXS_INT_OCC_BIT 1 +#define CBR_EXS_PENDING_BIT 2 +#define CBR_EXS_QUEUED_BIT 3 +#define CBR_EXS_TLBHW_BIT 4 +#define CBR_EXS_EXCEPTION_BIT 5 + +#define CBR_EXS_ABORT_OCC (1 << CBR_EXS_ABORT_OCC_BIT) +#define CBR_EXS_INT_OCC (1 << CBR_EXS_INT_OCC_BIT) +#define CBR_EXS_PENDING (1 << CBR_EXS_PENDING_BIT) +#define CBR_EXS_QUEUED (1 << CBR_EXS_QUEUED_BIT) +#define CBR_EXS_TLBHW (1 << CBR_EXS_TLBHW_BIT) +#define CBR_EXS_EXCEPTION (1 << CBR_EXS_EXCEPTION_BIT) + +/* CBE ecause bits - defined in gru_instructions.h */ + +/* + * Convert a processor pagesize into the strange encoded pagesize used by the + * GRU. Processor pagesize is encoded as log of bytes per page. (or PAGE_SHIFT) + * pagesize log pagesize grupagesize + * 4k 12 0 + * 16k 14 1 + * 64k 16 2 + * 256k 18 3 + * 1m 20 4 + * 2m 21 5 + * 4m 22 6 + * 16m 24 7 + * 64m 26 8 + * ... + */ +#define GRU_PAGESIZE(sh) ((((sh) > 20 ? (sh) + 2: (sh)) >> 1) - 6) +#define GRU_SIZEAVAIL(sh) (1UL << GRU_PAGESIZE(sh)) + +/* minimum TLB purge count to ensure a full purge */ +#define GRUMAXINVAL 1024UL + + +/* Extract the status field from a kernel handle */ +#define GET_MSEG_HANDLE_STATUS(h) (((*(unsigned long *)(h)) >> 16) & 3) + +static inline void start_instruction(void *h) +{ + unsigned long *w0 = h; + + wmb(); /* setting CMD bit must be last */ + *w0 = *w0 | 1; + gru_flush_cache(h); +} + +static inline int wait_instruction_complete(void *h) +{ + int status; + + do { + cpu_relax(); + barrier(); + status = GET_MSEG_HANDLE_STATUS(h); + } while (status == CCHSTATUS_ACTIVE); + return status; +} + +#if defined CONFIG_IA64 +static inline void cch_allocate_set_asids( + struct gru_context_configuration_handle *cch, int asidval) +{ + int i; + + for (i = 0; i <= RGN_HPAGE; i++) { /* assume HPAGE is last region */ + cch->asid[i] = (asidval++); +#if 0 + /* ZZZ hugepages not supported yet */ + if (i == RGN_HPAGE) + cch->sizeavail[i] = GRU_SIZEAVAIL(hpage_shift); + else +#endif + cch->sizeavail[i] = GRU_SIZEAVAIL(PAGE_SHIFT); + } +} +#elif defined CONFIG_X86_64 +static inline void cch_allocate_set_asids( + struct gru_context_configuration_handle *cch, int asidval) +{ + int i; + + for (i = 0; i < 8; i++) { + cch->asid[i] = asidval++; + cch->sizeavail[i] = GRU_SIZEAVAIL(PAGE_SHIFT) | + GRU_SIZEAVAIL(21); + } +} +#endif + +static inline int cch_allocate(struct gru_context_configuration_handle *cch, + int asidval, unsigned long cbrmap, + unsigned long dsrmap) +{ + cch_allocate_set_asids(cch, asidval); + cch->dsr_allocation_map = dsrmap; + cch->cbr_allocation_map = cbrmap; + cch->opc = CCHOP_ALLOCATE; + start_instruction(cch); + return wait_instruction_complete(cch); +} + +static inline int cch_start(struct gru_context_configuration_handle *cch) +{ + cch->opc = CCHOP_START; + start_instruction(cch); + return wait_instruction_complete(cch); +} + +static inline int cch_interrupt(struct gru_context_configuration_handle *cch) +{ + cch->opc = CCHOP_INTERRUPT; + start_instruction(cch); + return wait_instruction_complete(cch); +} + +static inline int cch_deallocate(struct gru_context_configuration_handle *cch) +{ + cch->opc = CCHOP_DEALLOCATE; + start_instruction(cch); + return wait_instruction_complete(cch); +} + +static inline int cch_interrupt_sync(struct gru_context_configuration_handle + *cch) +{ + cch->opc = CCHOP_INTERRUPT_SYNC; + start_instruction(cch); + return wait_instruction_complete(cch); +} + +static inline int tgh_invalidate(struct gru_tlb_global_handle *tgh, + unsigned long vaddr, unsigned long vaddrmask, + int asid, int pagesize, int global, int n, + unsigned short ctxbitmap) +{ + tgh->vaddr = vaddr; + tgh->asid = asid; + tgh->pagesize = pagesize; + tgh->n = n; + tgh->global = global; + tgh->vaddrmask = vaddrmask; + tgh->ctxbitmap = ctxbitmap; + tgh->opc = TGHOP_TLBINV; + start_instruction(tgh); + return wait_instruction_complete(tgh); +} + +static inline void tfh_write_only(struct gru_tlb_fault_handle *tfh, + unsigned long pfn, unsigned long vaddr, + int asid, int dirty, int pagesize) +{ + tfh->fillasid = asid; + tfh->fillvaddr = vaddr; + tfh->pfn = pfn; + tfh->dirty = dirty; + tfh->pagesize = pagesize; + tfh->opc = TFHOP_WRITE_ONLY; + start_instruction(tfh); +} + +static inline void tfh_write_restart(struct gru_tlb_fault_handle *tfh, + unsigned long paddr, int gaa, + unsigned long vaddr, int asid, int dirty, + int pagesize) +{ + tfh->fillasid = asid; + tfh->fillvaddr = vaddr; + tfh->pfn = paddr >> GRU_PADDR_SHIFT; + tfh->gaa = gaa; + tfh->dirty = dirty; + tfh->pagesize = pagesize; + tfh->opc = TFHOP_WRITE_RESTART; + start_instruction(tfh); +} + +static inline void tfh_restart(struct gru_tlb_fault_handle *tfh) +{ + tfh->opc = TFHOP_RESTART; + start_instruction(tfh); +} + +static inline void tfh_user_polling_mode(struct gru_tlb_fault_handle *tfh) +{ + tfh->opc = TFHOP_USER_POLLING_MODE; + start_instruction(tfh); +} + +static inline void tfh_exception(struct gru_tlb_fault_handle *tfh) +{ + tfh->opc = TFHOP_EXCEPTION; + start_instruction(tfh); +} + +#endif /* __GRUHANDLES_H__ */ -- GitLab From 4c921d4d8aa74140597fd8736261837f73ca6e7a Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:33:54 -0700 Subject: [PATCH 0376/1024] GRU Driver: GRU instructions & macros This patchs contains macros & inline functions used to issue instructions to the GRU. Signed-off-by: Jack Steiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/gru_instructions.h | 679 ++++++++++++++++++++++++ 1 file changed, 679 insertions(+) create mode 100644 drivers/misc/sgi-gru/gru_instructions.h diff --git a/drivers/misc/sgi-gru/gru_instructions.h b/drivers/misc/sgi-gru/gru_instructions.h new file mode 100644 index 00000000000..3159b261c5a --- /dev/null +++ b/drivers/misc/sgi-gru/gru_instructions.h @@ -0,0 +1,679 @@ +/* + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation; either version 2.1 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __GRU_INSTRUCTIONS_H__ +#define __GRU_INSTRUCTIONS_H__ + +#define gru_flush_cache_hook(p) +#define gru_emulator_wait_hook(p, w) + +/* + * Architecture dependent functions + */ + +#if defined CONFIG_IA64 +#include +#include +#define __flush_cache(p) ia64_fc(p) +/* Use volatile on IA64 to ensure ordering via st4.rel */ +#define gru_ordered_store_int(p,v) \ + do { \ + barrier(); \ + *((volatile int *)(p)) = v; /* force st.rel */ \ + } while (0) +#elif defined CONFIG_X86_64 +#define __flush_cache(p) clflush(p) +#define gru_ordered_store_int(p,v) \ + do { \ + barrier(); \ + *(int *)p = v; \ + } while (0) +#else +#error "Unsupported architecture" +#endif + +/* + * Control block status and exception codes + */ +#define CBS_IDLE 0 +#define CBS_EXCEPTION 1 +#define CBS_ACTIVE 2 +#define CBS_CALL_OS 3 + +/* CB substatus bitmasks */ +#define CBSS_MSG_QUEUE_MASK 7 +#define CBSS_IMPLICIT_ABORT_ACTIVE_MASK 8 + +/* CB substatus message queue values (low 3 bits of substatus) */ +#define CBSS_NO_ERROR 0 +#define CBSS_LB_OVERFLOWED 1 +#define CBSS_QLIMIT_REACHED 2 +#define CBSS_PAGE_OVERFLOW 3 +#define CBSS_AMO_NACKED 4 +#define CBSS_PUT_NACKED 5 + +/* + * Structure used to fetch exception detail for CBs that terminate with + * CBS_EXCEPTION + */ +struct control_block_extended_exc_detail { + unsigned long cb; + int opc; + int ecause; + int exopc; + long exceptdet0; + int exceptdet1; +}; + +/* + * Instruction formats + */ + +/* + * Generic instruction format. + * This definition has precise bit field definitions. + */ +struct gru_instruction_bits { + /* DW 0 - low */ + unsigned int icmd: 1; + unsigned char ima: 3; /* CB_DelRep, unmapped mode */ + unsigned char reserved0: 4; + unsigned int xtype: 3; + unsigned int iaa0: 2; + unsigned int iaa1: 2; + unsigned char reserved1: 1; + unsigned char opc: 8; /* opcode */ + unsigned char exopc: 8; /* extended opcode */ + /* DW 0 - high */ + unsigned int idef2: 22; /* TRi0 */ + unsigned char reserved2: 2; + unsigned char istatus: 2; + unsigned char isubstatus:4; + unsigned char reserved3: 2; + /* DW 1 */ + unsigned long idef4; /* 42 bits: TRi1, BufSize */ + /* DW 2-6 */ + unsigned long idef1; /* BAddr0 */ + unsigned long idef5; /* Nelem */ + unsigned long idef6; /* Stride, Operand1 */ + unsigned long idef3; /* BAddr1, Value, Operand2 */ + unsigned long reserved4; + /* DW 7 */ + unsigned long avalue; /* AValue */ +}; + +/* + * Generic instruction with friendlier names. This format is used + * for inline instructions. + */ +struct gru_instruction { + /* DW 0 */ + unsigned int op32; /* icmd,xtype,iaa0,ima,opc */ + unsigned int tri0; + unsigned long tri1_bufsize; /* DW 1 */ + unsigned long baddr0; /* DW 2 */ + unsigned long nelem; /* DW 3 */ + unsigned long op1_stride; /* DW 4 */ + unsigned long op2_value_baddr1; /* DW 5 */ + unsigned long reserved0; /* DW 6 */ + unsigned long avalue; /* DW 7 */ +}; + +/* Some shifts and masks for the low 32 bits of a GRU command */ +#define GRU_CB_ICMD_SHFT 0 +#define GRU_CB_ICMD_MASK 0x1 +#define GRU_CB_XTYPE_SHFT 8 +#define GRU_CB_XTYPE_MASK 0x7 +#define GRU_CB_IAA0_SHFT 11 +#define GRU_CB_IAA0_MASK 0x3 +#define GRU_CB_IAA1_SHFT 13 +#define GRU_CB_IAA1_MASK 0x3 +#define GRU_CB_IMA_SHFT 1 +#define GRU_CB_IMA_MASK 0x3 +#define GRU_CB_OPC_SHFT 16 +#define GRU_CB_OPC_MASK 0xff +#define GRU_CB_EXOPC_SHFT 24 +#define GRU_CB_EXOPC_MASK 0xff + +/* GRU instruction opcodes (opc field) */ +#define OP_NOP 0x00 +#define OP_BCOPY 0x01 +#define OP_VLOAD 0x02 +#define OP_IVLOAD 0x03 +#define OP_VSTORE 0x04 +#define OP_IVSTORE 0x05 +#define OP_VSET 0x06 +#define OP_IVSET 0x07 +#define OP_MESQ 0x08 +#define OP_GAMXR 0x09 +#define OP_GAMIR 0x0a +#define OP_GAMIRR 0x0b +#define OP_GAMER 0x0c +#define OP_GAMERR 0x0d +#define OP_BSTORE 0x0e +#define OP_VFLUSH 0x0f + + +/* Extended opcodes values (exopc field) */ + +/* GAMIR - AMOs with implicit operands */ +#define EOP_IR_FETCH 0x01 /* Plain fetch of memory */ +#define EOP_IR_CLR 0x02 /* Fetch and clear */ +#define EOP_IR_INC 0x05 /* Fetch and increment */ +#define EOP_IR_DEC 0x07 /* Fetch and decrement */ +#define EOP_IR_QCHK1 0x0d /* Queue check, 64 byte msg */ +#define EOP_IR_QCHK2 0x0e /* Queue check, 128 byte msg */ + +/* GAMIRR - Registered AMOs with implicit operands */ +#define EOP_IRR_FETCH 0x01 /* Registered fetch of memory */ +#define EOP_IRR_CLR 0x02 /* Registered fetch and clear */ +#define EOP_IRR_INC 0x05 /* Registered fetch and increment */ +#define EOP_IRR_DEC 0x07 /* Registered fetch and decrement */ +#define EOP_IRR_DECZ 0x0f /* Registered fetch and decrement, update on zero*/ + +/* GAMER - AMOs with explicit operands */ +#define EOP_ER_SWAP 0x00 /* Exchange argument and memory */ +#define EOP_ER_OR 0x01 /* Logical OR with memory */ +#define EOP_ER_AND 0x02 /* Logical AND with memory */ +#define EOP_ER_XOR 0x03 /* Logical XOR with memory */ +#define EOP_ER_ADD 0x04 /* Add value to memory */ +#define EOP_ER_CSWAP 0x08 /* Compare with operand2, write operand1 if match*/ +#define EOP_ER_CADD 0x0c /* Queue check, operand1*64 byte msg */ + +/* GAMERR - Registered AMOs with explicit operands */ +#define EOP_ERR_SWAP 0x00 /* Exchange argument and memory */ +#define EOP_ERR_OR 0x01 /* Logical OR with memory */ +#define EOP_ERR_AND 0x02 /* Logical AND with memory */ +#define EOP_ERR_XOR 0x03 /* Logical XOR with memory */ +#define EOP_ERR_ADD 0x04 /* Add value to memory */ +#define EOP_ERR_CSWAP 0x08 /* Compare with operand2, write operand1 if match*/ +#define EOP_ERR_EPOLL 0x09 /* Poll for equality */ +#define EOP_ERR_NPOLL 0x0a /* Poll for inequality */ + +/* GAMXR - SGI Arithmetic unit */ +#define EOP_XR_CSWAP 0x0b /* Masked compare exchange */ + + +/* Transfer types (xtype field) */ +#define XTYPE_B 0x0 /* byte */ +#define XTYPE_S 0x1 /* short (2-byte) */ +#define XTYPE_W 0x2 /* word (4-byte) */ +#define XTYPE_DW 0x3 /* doubleword (8-byte) */ +#define XTYPE_CL 0x6 /* cacheline (64-byte) */ + + +/* Instruction access attributes (iaa0, iaa1 fields) */ +#define IAA_RAM 0x0 /* normal cached RAM access */ +#define IAA_NCRAM 0x2 /* noncoherent RAM access */ +#define IAA_MMIO 0x1 /* noncoherent memory-mapped I/O space */ +#define IAA_REGISTER 0x3 /* memory-mapped registers, etc. */ + + +/* Instruction mode attributes (ima field) */ +#define IMA_MAPPED 0x0 /* Virtual mode */ +#define IMA_CB_DELAY 0x1 /* hold read responses until status changes */ +#define IMA_UNMAPPED 0x2 /* bypass the TLBs (OS only) */ +#define IMA_INTERRUPT 0x4 /* Interrupt when instruction completes */ + +/* CBE ecause bits */ +#define CBE_CAUSE_RI (1 << 0) +#define CBE_CAUSE_INVALID_INSTRUCTION (1 << 1) +#define CBE_CAUSE_UNMAPPED_MODE_FORBIDDEN (1 << 2) +#define CBE_CAUSE_PE_CHECK_DATA_ERROR (1 << 3) +#define CBE_CAUSE_IAA_GAA_MISMATCH (1 << 4) +#define CBE_CAUSE_DATA_SEGMENT_LIMIT_EXCEPTION (1 << 5) +#define CBE_CAUSE_OS_FATAL_TLB_FAULT (1 << 6) +#define CBE_CAUSE_EXECUTION_HW_ERROR (1 << 7) +#define CBE_CAUSE_TLBHW_ERROR (1 << 8) +#define CBE_CAUSE_RA_REQUEST_TIMEOUT (1 << 9) +#define CBE_CAUSE_HA_REQUEST_TIMEOUT (1 << 10) +#define CBE_CAUSE_RA_RESPONSE_FATAL (1 << 11) +#define CBE_CAUSE_RA_RESPONSE_NON_FATAL (1 << 12) +#define CBE_CAUSE_HA_RESPONSE_FATAL (1 << 13) +#define CBE_CAUSE_HA_RESPONSE_NON_FATAL (1 << 14) +#define CBE_CAUSE_ADDRESS_SPACE_DECODE_ERROR (1 << 15) +#define CBE_CAUSE_RESPONSE_DATA_ERROR (1 << 16) +#define CBE_CAUSE_PROTOCOL_STATE_DATA_ERROR (1 << 17) + +/* + * Exceptions are retried for the following cases. If any OTHER bits are set + * in ecause, the exception is not retryable. + */ +#define EXCEPTION_RETRY_BITS (CBE_CAUSE_RESPONSE_DATA_ERROR | \ + CBE_CAUSE_RA_REQUEST_TIMEOUT | \ + CBE_CAUSE_TLBHW_ERROR | \ + CBE_CAUSE_HA_REQUEST_TIMEOUT) + +/* Message queue head structure */ +union gru_mesqhead { + unsigned long val; + struct { + unsigned int head; + unsigned int limit; + }; +}; + + +/* Generate the low word of a GRU instruction */ +static inline unsigned int +__opword(unsigned char opcode, unsigned char exopc, unsigned char xtype, + unsigned char iaa0, unsigned char iaa1, + unsigned char ima) +{ + return (1 << GRU_CB_ICMD_SHFT) | + (iaa0 << GRU_CB_IAA0_SHFT) | + (iaa1 << GRU_CB_IAA1_SHFT) | + (ima << GRU_CB_IMA_SHFT) | + (xtype << GRU_CB_XTYPE_SHFT) | + (opcode << GRU_CB_OPC_SHFT) | + (exopc << GRU_CB_EXOPC_SHFT); +} + +/* + * Prefetch a cacheline. Fetch is unconditional. Must page fault if + * no valid TLB entry is found. + * ??? should I use actual "load" or hardware prefetch??? + */ +static inline void gru_prefetch(void *p) +{ + *(volatile char *)p; +} + +/* + * Architecture specific intrinsics + */ +static inline void gru_flush_cache(void *p) +{ + __flush_cache(p); +} + +/* + * Store the lower 32 bits of the command including the "start" bit. Then + * start the instruction executing. + */ +static inline void gru_start_instruction(struct gru_instruction *ins, int op32) +{ + gru_ordered_store_int(ins, op32); +} + + +/* Convert "hints" to IMA */ +#define CB_IMA(h) ((h) | IMA_UNMAPPED) + +/* Convert data segment cache line index into TRI0 / TRI1 value */ +#define GRU_DINDEX(i) ((i) * GRU_CACHE_LINE_BYTES) + +/* Inline functions for GRU instructions. + * Note: + * - nelem and stride are in elements + * - tri0/tri1 is in bytes for the beginning of the data segment. + */ +static inline void gru_vload(void *cb, unsigned long mem_addr, + unsigned int tri0, unsigned char xtype, unsigned long nelem, + unsigned long stride, unsigned long hints) +{ + struct gru_instruction *ins = (struct gru_instruction *)cb; + + ins->baddr0 = (long)mem_addr; + ins->nelem = nelem; + ins->tri0 = tri0; + ins->op1_stride = stride; + gru_start_instruction(ins, __opword(OP_VLOAD, 0, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_vstore(void *cb, unsigned long mem_addr, + unsigned int tri0, unsigned char xtype, unsigned long nelem, + unsigned long stride, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)mem_addr; + ins->nelem = nelem; + ins->tri0 = tri0; + ins->op1_stride = stride; + gru_start_instruction(ins, __opword(OP_VSTORE, 0, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_ivload(void *cb, unsigned long mem_addr, + unsigned int tri0, unsigned int tri1, unsigned char xtype, + unsigned long nelem, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)mem_addr; + ins->nelem = nelem; + ins->tri0 = tri0; + ins->tri1_bufsize = tri1; + gru_start_instruction(ins, __opword(OP_IVLOAD, 0, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_ivstore(void *cb, unsigned long mem_addr, + unsigned int tri0, unsigned int tri1, + unsigned char xtype, unsigned long nelem, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)mem_addr; + ins->nelem = nelem; + ins->tri0 = tri0; + ins->tri1_bufsize = tri1; + gru_start_instruction(ins, __opword(OP_IVSTORE, 0, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_vset(void *cb, unsigned long mem_addr, + unsigned long value, unsigned char xtype, unsigned long nelem, + unsigned long stride, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)mem_addr; + ins->op2_value_baddr1 = value; + ins->nelem = nelem; + ins->op1_stride = stride; + gru_start_instruction(ins, __opword(OP_VSET, 0, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_ivset(void *cb, unsigned long mem_addr, + unsigned int tri1, unsigned long value, unsigned char xtype, + unsigned long nelem, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)mem_addr; + ins->op2_value_baddr1 = value; + ins->nelem = nelem; + ins->tri1_bufsize = tri1; + gru_start_instruction(ins, __opword(OP_IVSET, 0, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_vflush(void *cb, unsigned long mem_addr, + unsigned long nelem, unsigned char xtype, unsigned long stride, + unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)mem_addr; + ins->op1_stride = stride; + ins->nelem = nelem; + gru_start_instruction(ins, __opword(OP_VFLUSH, 0, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_nop(void *cb, int hints) +{ + struct gru_instruction *ins = (void *)cb; + + gru_start_instruction(ins, __opword(OP_NOP, 0, 0, 0, 0, CB_IMA(hints))); +} + + +static inline void gru_bcopy(void *cb, const unsigned long src, + unsigned long dest, + unsigned int tri0, unsigned int xtype, unsigned long nelem, + unsigned int bufsize, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)src; + ins->op2_value_baddr1 = (long)dest; + ins->nelem = nelem; + ins->tri0 = tri0; + ins->tri1_bufsize = bufsize; + gru_start_instruction(ins, __opword(OP_BCOPY, 0, xtype, IAA_RAM, + IAA_RAM, CB_IMA(hints))); +} + +static inline void gru_bstore(void *cb, const unsigned long src, + unsigned long dest, unsigned int tri0, unsigned int xtype, + unsigned long nelem, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)src; + ins->op2_value_baddr1 = (long)dest; + ins->nelem = nelem; + ins->tri0 = tri0; + gru_start_instruction(ins, __opword(OP_BSTORE, 0, xtype, 0, IAA_RAM, + CB_IMA(hints))); +} + +static inline void gru_gamir(void *cb, int exopc, unsigned long src, + unsigned int xtype, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)src; + gru_start_instruction(ins, __opword(OP_GAMIR, exopc, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_gamirr(void *cb, int exopc, unsigned long src, + unsigned int xtype, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)src; + gru_start_instruction(ins, __opword(OP_GAMIRR, exopc, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_gamer(void *cb, int exopc, unsigned long src, + unsigned int xtype, + unsigned long operand1, unsigned long operand2, + unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)src; + ins->op1_stride = operand1; + ins->op2_value_baddr1 = operand2; + gru_start_instruction(ins, __opword(OP_GAMER, exopc, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_gamerr(void *cb, int exopc, unsigned long src, + unsigned int xtype, unsigned long operand1, + unsigned long operand2, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)src; + ins->op1_stride = operand1; + ins->op2_value_baddr1 = operand2; + gru_start_instruction(ins, __opword(OP_GAMERR, exopc, xtype, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline void gru_gamxr(void *cb, unsigned long src, + unsigned int tri0, unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)src; + ins->nelem = 4; + gru_start_instruction(ins, __opword(OP_GAMXR, EOP_XR_CSWAP, XTYPE_DW, + IAA_RAM, 0, CB_IMA(hints))); +} + +static inline void gru_mesq(void *cb, unsigned long queue, + unsigned long tri0, unsigned long nelem, + unsigned long hints) +{ + struct gru_instruction *ins = (void *)cb; + + ins->baddr0 = (long)queue; + ins->nelem = nelem; + ins->tri0 = tri0; + gru_start_instruction(ins, __opword(OP_MESQ, 0, XTYPE_CL, IAA_RAM, 0, + CB_IMA(hints))); +} + +static inline unsigned long gru_get_amo_value(void *cb) +{ + struct gru_instruction *ins = (void *)cb; + + return ins->avalue; +} + +static inline int gru_get_amo_value_head(void *cb) +{ + struct gru_instruction *ins = (void *)cb; + + return ins->avalue & 0xffffffff; +} + +static inline int gru_get_amo_value_limit(void *cb) +{ + struct gru_instruction *ins = (void *)cb; + + return ins->avalue >> 32; +} + +static inline union gru_mesqhead gru_mesq_head(int head, int limit) +{ + union gru_mesqhead mqh; + + mqh.head = head; + mqh.limit = limit; + return mqh; +} + +/* + * Get struct control_block_extended_exc_detail for CB. + */ +extern int gru_get_cb_exception_detail(void *cb, + struct control_block_extended_exc_detail *excdet); + +#define GRU_EXC_STR_SIZE 256 + +extern int gru_check_status_proc(void *cb); +extern int gru_wait_proc(void *cb); +extern void gru_wait_abort_proc(void *cb); + +/* + * Control block definition for checking status + */ +struct gru_control_block_status { + unsigned int icmd :1; + unsigned int unused1 :31; + unsigned int unused2 :24; + unsigned int istatus :2; + unsigned int isubstatus :4; + unsigned int inused3 :2; +}; + +/* Get CB status */ +static inline int gru_get_cb_status(void *cb) +{ + struct gru_control_block_status *cbs = (void *)cb; + + return cbs->istatus; +} + +/* Get CB message queue substatus */ +static inline int gru_get_cb_message_queue_substatus(void *cb) +{ + struct gru_control_block_status *cbs = (void *)cb; + + return cbs->isubstatus & CBSS_MSG_QUEUE_MASK; +} + +/* Get CB substatus */ +static inline int gru_get_cb_substatus(void *cb) +{ + struct gru_control_block_status *cbs = (void *)cb; + + return cbs->isubstatus; +} + +/* Check the status of a CB. If the CB is in UPM mode, call the + * OS to handle the UPM status. + * Returns the CB status field value (0 for normal completion) + */ +static inline int gru_check_status(void *cb) +{ + struct gru_control_block_status *cbs = (void *)cb; + int ret = cbs->istatus; + + if (ret == CBS_CALL_OS) + ret = gru_check_status_proc(cb); + return ret; +} + +/* Wait for CB to complete. + * Returns the CB status field value (0 for normal completion) + */ +static inline int gru_wait(void *cb) +{ + struct gru_control_block_status *cbs = (void *)cb; + int ret = cbs->istatus;; + + if (ret != CBS_IDLE) + ret = gru_wait_proc(cb); + return ret; +} + +/* Wait for CB to complete. Aborts program if error. (Note: error does NOT + * mean TLB mis - only fatal errors such as memory parity error or user + * bugs will cause termination. + */ +static inline void gru_wait_abort(void *cb) +{ + struct gru_control_block_status *cbs = (void *)cb; + + if (cbs->istatus != CBS_IDLE) + gru_wait_abort_proc(cb); +} + + +/* + * Get a pointer to a control block + * gseg - GSeg address returned from gru_get_thread_gru_segment() + * index - index of desired CB + */ +static inline void *gru_get_cb_pointer(void *gseg, + int index) +{ + return gseg + GRU_CB_BASE + index * GRU_HANDLE_STRIDE; +} + +/* + * Get a pointer to a cacheline in the data segment portion of a GSeg + * gseg - GSeg address returned from gru_get_thread_gru_segment() + * index - index of desired cache line + */ +static inline void *gru_get_data_pointer(void *gseg, int index) +{ + return gseg + GRU_DS_BASE + index * GRU_CACHE_LINE_BYTES; +} + +/* + * Convert a vaddr into the tri index within the GSEG + * vaddr - virtual address of within gseg + */ +static inline int gru_get_tri(void *vaddr) +{ + return ((unsigned long)vaddr & (GRU_GSEG_PAGESIZE - 1)) - GRU_DS_BASE; +} +#endif /* __GRU_INSTRUCTIONS_H__ */ -- GitLab From 13d19498b0446cad2c394f9fbec8149b44a60c6e Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:33:55 -0700 Subject: [PATCH 0377/1024] GRU Driver: driver internal header files This patch contains header files internal to the GRU driver. Signed-off-by: Jack Steiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/gru.h | 67 ++++ drivers/misc/sgi-gru/grulib.h | 97 ++++++ drivers/misc/sgi-gru/grutables.h | 545 +++++++++++++++++++++++++++++++ 3 files changed, 709 insertions(+) create mode 100644 drivers/misc/sgi-gru/gru.h create mode 100644 drivers/misc/sgi-gru/grulib.h create mode 100644 drivers/misc/sgi-gru/grutables.h diff --git a/drivers/misc/sgi-gru/gru.h b/drivers/misc/sgi-gru/gru.h new file mode 100644 index 00000000000..40df7cb3f0a --- /dev/null +++ b/drivers/misc/sgi-gru/gru.h @@ -0,0 +1,67 @@ +/* + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation; either version 2.1 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __GRU_H__ +#define __GRU_H__ + +/* + * GRU architectural definitions + */ +#define GRU_CACHE_LINE_BYTES 64 +#define GRU_HANDLE_STRIDE 256 +#define GRU_CB_BASE 0 +#define GRU_DS_BASE 0x20000 + +/* + * Size used to map GRU GSeg + */ +#if defined CONFIG_IA64 +#define GRU_GSEG_PAGESIZE (256 * 1024UL) +#elif defined CONFIG_X86_64 +#define GRU_GSEG_PAGESIZE (256 * 1024UL) /* ZZZ 2MB ??? */ +#else +#error "Unsupported architecture" +#endif + +/* + * Structure for obtaining GRU resource information + */ +struct gru_chiplet_info { + int node; + int chiplet; + int blade; + int total_dsr_bytes; + int total_cbr; + int total_user_dsr_bytes; + int total_user_cbr; + int free_user_dsr_bytes; + int free_user_cbr; +}; + +/* Flags for GRU options on the gru_create_context() call */ +/* Select one of the follow 4 options to specify how TLB misses are handled */ +#define GRU_OPT_MISS_DEFAULT 0x0000 /* Use default mode */ +#define GRU_OPT_MISS_USER_POLL 0x0001 /* User will poll CB for faults */ +#define GRU_OPT_MISS_FMM_INTR 0x0002 /* Send interrupt to cpu to + handle fault */ +#define GRU_OPT_MISS_FMM_POLL 0x0003 /* Use system polling thread */ +#define GRU_OPT_MISS_MASK 0x0003 /* Mask for TLB MISS option */ + + + +#endif /* __GRU_H__ */ diff --git a/drivers/misc/sgi-gru/grulib.h b/drivers/misc/sgi-gru/grulib.h new file mode 100644 index 00000000000..e56e196a699 --- /dev/null +++ b/drivers/misc/sgi-gru/grulib.h @@ -0,0 +1,97 @@ +/* + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published by + * the Free Software Foundation; either version 2.1 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __GRULIB_H__ +#define __GRULIB_H__ + +#define GRU_BASENAME "gru" +#define GRU_FULLNAME "/dev/gru" +#define GRU_IOCTL_NUM 'G' + +/* + * Maximum number of GRU segments that a user can have open + * ZZZ temp - set high for testing. Revisit. + */ +#define GRU_MAX_OPEN_CONTEXTS 32 + +/* Set Number of Request Blocks */ +#define GRU_CREATE_CONTEXT _IOWR(GRU_IOCTL_NUM, 1, void *) + +/* Register task as using the slice */ +#define GRU_SET_TASK_SLICE _IOWR(GRU_IOCTL_NUM, 5, void *) + +/* Fetch exception detail */ +#define GRU_USER_GET_EXCEPTION_DETAIL _IOWR(GRU_IOCTL_NUM, 6, void *) + +/* For user call_os handling - normally a TLB fault */ +#define GRU_USER_CALL_OS _IOWR(GRU_IOCTL_NUM, 8, void *) + +/* For user unload context */ +#define GRU_USER_UNLOAD_CONTEXT _IOWR(GRU_IOCTL_NUM, 9, void *) + +/* For fetching GRU chiplet status */ +#define GRU_GET_CHIPLET_STATUS _IOWR(GRU_IOCTL_NUM, 10, void *) + +/* For user TLB flushing (primarily for tests) */ +#define GRU_USER_FLUSH_TLB _IOWR(GRU_IOCTL_NUM, 50, void *) + +/* Get some config options (primarily for tests & emulator) */ +#define GRU_GET_CONFIG_INFO _IOWR(GRU_IOCTL_NUM, 51, void *) + +#define CONTEXT_WINDOW_BYTES(th) (GRU_GSEG_PAGESIZE * (th)) +#define THREAD_POINTER(p, th) (p + GRU_GSEG_PAGESIZE * (th)) + +/* + * Structure used to pass TLB flush parameters to the driver + */ +struct gru_create_context_req { + unsigned long gseg; + unsigned int data_segment_bytes; + unsigned int control_blocks; + unsigned int maximum_thread_count; + unsigned int options; +}; + +/* + * Structure used to pass unload context parameters to the driver + */ +struct gru_unload_context_req { + unsigned long gseg; +}; + +/* + * Structure used to pass TLB flush parameters to the driver + */ +struct gru_flush_tlb_req { + unsigned long gseg; + unsigned long vaddr; + size_t len; +}; + +/* + * GRU configuration info (temp - for testing) + */ +struct gru_config_info { + int cpus; + int blades; + int nodes; + int chiplets; + int fill[16]; +}; + +#endif /* __GRULIB_H__ */ diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h new file mode 100644 index 00000000000..f97d8464012 --- /dev/null +++ b/drivers/misc/sgi-gru/grutables.h @@ -0,0 +1,545 @@ +/* + * SN Platform GRU Driver + * + * GRU DRIVER TABLES, MACROS, externs, etc + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __GRUTABLES_H__ +#define __GRUTABLES_H__ + +/* + * Tables: + * + * VDATA-VMA Data - Holds a few parameters. Head of linked list of + * GTS tables for threads using the GSEG + * GTS - Gru Thread State - contains info for managing a GSEG context. A + * GTS is allocated for each thread accessing a + * GSEG. + * GTD - GRU Thread Data - contains shadow copy of GRU data when GSEG is + * not loaded into a GRU + * GMS - GRU Memory Struct - Used to manage TLB shootdowns. Tracks GRUs + * where a GSEG has been loaded. Similar to + * an mm_struct but for GRU. + * + * GS - GRU State - Used to manage the state of a GRU chiplet + * BS - Blade State - Used to manage state of all GRU chiplets + * on a blade + * + * + * Normal task tables for task using GRU. + * - 2 threads in process + * - 2 GSEGs open in process + * - GSEG1 is being used by both threads + * - GSEG2 is used only by thread 2 + * + * task -->| + * task ---+---> mm ->------ (notifier) -------+-> gms + * | | + * |--> vma -> vdata ---> gts--->| GSEG1 (thread1) + * | | | + * | +-> gts--->| GSEG1 (thread2) + * | | + * |--> vma -> vdata ---> gts--->| GSEG2 (thread2) + * . + * . + * + * GSEGs are marked DONTCOPY on fork + * + * At open + * file.private_data -> NULL + * + * At mmap, + * vma -> vdata + * + * After gseg reference + * vma -> vdata ->gts + * + * After fork + * parent + * vma -> vdata -> gts + * child + * (vma is not copied) + * + */ + +#include +#include +#include +#include +#include +#include "gru.h" +#include "gruhandles.h" + +extern struct gru_stats_s gru_stats; +extern struct gru_blade_state *gru_base[]; +extern unsigned long gru_start_paddr, gru_end_paddr; + +#define GRU_MAX_BLADES MAX_NUMNODES +#define GRU_MAX_GRUS (GRU_MAX_BLADES * GRU_CHIPLETS_PER_BLADE) + +#define GRU_DRIVER_ID_STR "SGI GRU Device Driver" +#define GRU_DRIVER_VERSION_STR "0.80" + +/* + * GRU statistics. + */ +struct gru_stats_s { + atomic_long_t vdata_alloc; + atomic_long_t vdata_free; + atomic_long_t gts_alloc; + atomic_long_t gts_free; + atomic_long_t vdata_double_alloc; + atomic_long_t gts_double_allocate; + atomic_long_t assign_context; + atomic_long_t assign_context_failed; + atomic_long_t free_context; + atomic_long_t load_context; + atomic_long_t unload_context; + atomic_long_t steal_context; + atomic_long_t steal_context_failed; + atomic_long_t nopfn; + atomic_long_t break_cow; + atomic_long_t asid_new; + atomic_long_t asid_next; + atomic_long_t asid_wrap; + atomic_long_t asid_reuse; + atomic_long_t intr; + atomic_long_t call_os; + atomic_long_t call_os_check_for_bug; + atomic_long_t call_os_wait_queue; + atomic_long_t user_flush_tlb; + atomic_long_t user_unload_context; + atomic_long_t user_exception; + atomic_long_t set_task_slice; + atomic_long_t migrate_check; + atomic_long_t migrated_retarget; + atomic_long_t migrated_unload; + atomic_long_t migrated_unload_delay; + atomic_long_t migrated_nopfn_retarget; + atomic_long_t migrated_nopfn_unload; + atomic_long_t tlb_dropin; + atomic_long_t tlb_dropin_fail_no_asid; + atomic_long_t tlb_dropin_fail_upm; + atomic_long_t tlb_dropin_fail_invalid; + atomic_long_t tlb_dropin_fail_range_active; + atomic_long_t tlb_dropin_fail_idle; + atomic_long_t tlb_dropin_fail_fmm; + atomic_long_t mmu_invalidate_range; + atomic_long_t mmu_invalidate_page; + atomic_long_t mmu_clear_flush_young; + atomic_long_t flush_tlb; + atomic_long_t flush_tlb_gru; + atomic_long_t flush_tlb_gru_tgh; + atomic_long_t flush_tlb_gru_zero_asid; + + atomic_long_t copy_gpa; + + atomic_long_t mesq_receive; + atomic_long_t mesq_receive_none; + atomic_long_t mesq_send; + atomic_long_t mesq_send_failed; + atomic_long_t mesq_noop; + atomic_long_t mesq_send_unexpected_error; + atomic_long_t mesq_send_lb_overflow; + atomic_long_t mesq_send_qlimit_reached; + atomic_long_t mesq_send_amo_nacked; + atomic_long_t mesq_send_put_nacked; + atomic_long_t mesq_qf_not_full; + atomic_long_t mesq_qf_locked; + atomic_long_t mesq_qf_noop_not_full; + atomic_long_t mesq_qf_switch_head_failed; + atomic_long_t mesq_qf_unexpected_error; + atomic_long_t mesq_noop_unexpected_error; + atomic_long_t mesq_noop_lb_overflow; + atomic_long_t mesq_noop_qlimit_reached; + atomic_long_t mesq_noop_amo_nacked; + atomic_long_t mesq_noop_put_nacked; + +}; + +#define OPT_DPRINT 1 +#define OPT_STATS 2 +#define GRU_QUICKLOOK 4 + + +#define IRQ_GRU 110 /* Starting IRQ number for interrupts */ + +/* Delay in jiffies between attempts to assign a GRU context */ +#define GRU_ASSIGN_DELAY ((HZ * 20) / 1000) + +/* + * If a process has it's context stolen, min delay in jiffies before trying to + * steal a context from another process. + */ +#define GRU_STEAL_DELAY ((HZ * 200) / 1000) + +#define STAT(id) do { \ + if (options & OPT_STATS) \ + atomic_long_inc(&gru_stats.id); \ + } while (0) + +#ifdef CONFIG_SGI_GRU_DEBUG +#define gru_dbg(dev, fmt, x...) \ + do { \ + if (options & OPT_DPRINT) \ + dev_dbg(dev, "%s: " fmt, __func__, x); \ + } while (0) +#else +#define gru_dbg(x...) +#endif + +/*----------------------------------------------------------------------------- + * ASID management + */ +#define MAX_ASID 0xfffff0 +#define MIN_ASID 8 +#define ASID_INC 8 /* number of regions */ + +/* Generate a GRU asid value from a GRU base asid & a virtual address. */ +#if defined CONFIG_IA64 +#define VADDR_HI_BIT 64 +#define GRUREGION(addr) ((addr) >> (VADDR_HI_BIT - 3) & 3) +#elif defined __x86_64 +#define VADDR_HI_BIT 48 +#define GRUREGION(addr) (0) /* ZZZ could do better */ +#else +#error "Unsupported architecture" +#endif +#define GRUASID(asid, addr) ((asid) + GRUREGION(addr)) + +/*------------------------------------------------------------------------------ + * File & VMS Tables + */ + +struct gru_state; + +/* + * This structure is pointed to from the mmstruct via the notifier pointer. + * There is one of these per address space. + */ +struct gru_mm_tracker { + unsigned int mt_asid_gen; /* ASID wrap count */ + int mt_asid; /* current base ASID for gru */ + unsigned short mt_ctxbitmap; /* bitmap of contexts using + asid */ +}; + +struct gru_mm_struct { + struct mmu_notifier ms_notifier; + atomic_t ms_refcnt; + spinlock_t ms_asid_lock; /* protects ASID assignment */ + atomic_t ms_range_active;/* num range_invals active */ + char ms_released; + wait_queue_head_t ms_wait_queue; + DECLARE_BITMAP(ms_asidmap, GRU_MAX_GRUS); + struct gru_mm_tracker ms_asids[GRU_MAX_GRUS]; +}; + +/* + * One of these structures is allocated when a GSEG is mmaped. The + * structure is pointed to by the vma->vm_private_data field in the vma struct. + */ +struct gru_vma_data { + spinlock_t vd_lock; /* Serialize access to vma */ + struct list_head vd_head; /* head of linked list of gts */ + long vd_user_options;/* misc user option flags */ + int vd_cbr_au_count; + int vd_dsr_au_count; +}; + +/* + * One of these is allocated for each thread accessing a mmaped GRU. A linked + * list of these structure is hung off the struct gru_vma_data in the mm_struct. + */ +struct gru_thread_state { + struct list_head ts_next; /* list - head at vma-private */ + struct mutex ts_ctxlock; /* load/unload CTX lock */ + struct mm_struct *ts_mm; /* mm currently mapped to + context */ + struct vm_area_struct *ts_vma; /* vma of GRU context */ + struct gru_state *ts_gru; /* GRU where the context is + loaded */ + struct gru_mm_struct *ts_gms; /* asid & ioproc struct */ + unsigned long ts_cbr_map; /* map of allocated CBRs */ + unsigned long ts_dsr_map; /* map of allocated DATA + resources */ + unsigned long ts_steal_jiffies;/* jiffies when context last + stolen */ + long ts_user_options;/* misc user option flags */ + pid_t ts_tgid_owner; /* task that is using the + context - for migration */ + int ts_tsid; /* thread that owns the + structure */ + int ts_tlb_int_select;/* target cpu if interrupts + enabled */ + int ts_ctxnum; /* context number where the + context is loaded */ + atomic_t ts_refcnt; /* reference count GTS */ + unsigned char ts_dsr_au_count;/* Number of DSR resources + required for contest */ + unsigned char ts_cbr_au_count;/* Number of CBR resources + required for contest */ + char ts_force_unload;/* force context to be unloaded + after migration */ + char ts_cbr_idx[GRU_CBR_AU];/* CBR numbers of each + allocated CB */ + unsigned long ts_gdata[0]; /* save area for GRU data (CB, + DS, CBE) */ +}; + +/* + * Threaded programs actually allocate an array of GSEGs when a context is + * created. Each thread uses a separate GSEG. TSID is the index into the GSEG + * array. + */ +#define TSID(a, v) (((a) - (v)->vm_start) / GRU_GSEG_PAGESIZE) +#define UGRUADDR(gts) ((gts)->ts_vma->vm_start + \ + (gts)->ts_tsid * GRU_GSEG_PAGESIZE) + +#define NULLCTX (-1) /* if context not loaded into GRU */ + +/*----------------------------------------------------------------------------- + * GRU State Tables + */ + +/* + * One of these exists for each GRU chiplet. + */ +struct gru_state { + struct gru_blade_state *gs_blade; /* GRU state for entire + blade */ + unsigned long gs_gru_base_paddr; /* Physical address of + gru segments (64) */ + void *gs_gru_base_vaddr; /* Virtual address of + gru segments (64) */ + unsigned char gs_gid; /* unique GRU number */ + unsigned char gs_tgh_local_shift; /* used to pick TGH for + local flush */ + unsigned char gs_tgh_first_remote; /* starting TGH# for + remote flush */ + unsigned short gs_blade_id; /* blade of GRU */ + spinlock_t gs_asid_lock; /* lock used for + assigning asids */ + spinlock_t gs_lock; /* lock used for + assigning contexts */ + + /* -- the following are protected by the gs_asid_lock spinlock ---- */ + unsigned int gs_asid; /* Next availe ASID */ + unsigned int gs_asid_limit; /* Limit of available + ASIDs */ + unsigned int gs_asid_gen; /* asid generation. + Inc on wrap */ + + /* --- the following fields are protected by the gs_lock spinlock --- */ + unsigned long gs_context_map; /* bitmap to manage + contexts in use */ + unsigned long gs_cbr_map; /* bitmap to manage CB + resources */ + unsigned long gs_dsr_map; /* bitmap used to manage + DATA resources */ + unsigned int gs_reserved_cbrs; /* Number of kernel- + reserved cbrs */ + unsigned int gs_reserved_dsr_bytes; /* Bytes of kernel- + reserved dsrs */ + unsigned short gs_active_contexts; /* number of contexts + in use */ + struct gru_thread_state *gs_gts[GRU_NUM_CCH]; /* GTS currently using + the context */ +}; + +/* + * This structure contains the GRU state for all the GRUs on a blade. + */ +struct gru_blade_state { + void *kernel_cb; /* First kernel + reserved cb */ + void *kernel_dsr; /* First kernel + reserved DSR */ + /* ---- the following are protected by the bs_lock spinlock ---- */ + spinlock_t bs_lock; /* lock used for + stealing contexts */ + int bs_lru_ctxnum; /* STEAL - last context + stolen */ + struct gru_state *bs_lru_gru; /* STEAL - last gru + stolen */ + + struct gru_state bs_grus[GRU_CHIPLETS_PER_BLADE]; +}; + +/*----------------------------------------------------------------------------- + * Address Primitives + */ +#define get_tfm_for_cpu(g, c) \ + ((struct gru_tlb_fault_map *)get_tfm((g)->gs_gru_base_vaddr, (c))) +#define get_tfh_by_index(g, i) \ + ((struct gru_tlb_fault_handle *)get_tfh((g)->gs_gru_base_vaddr, (i))) +#define get_tgh_by_index(g, i) \ + ((struct gru_tlb_global_handle *)get_tgh((g)->gs_gru_base_vaddr, (i))) +#define get_cbe_by_index(g, i) \ + ((struct gru_control_block_extended *)get_cbe((g)->gs_gru_base_vaddr,\ + (i))) + +/*----------------------------------------------------------------------------- + * Useful Macros + */ + +/* Given a blade# & chiplet#, get a pointer to the GRU */ +#define get_gru(b, c) (&gru_base[b]->bs_grus[c]) + +/* Number of bytes to save/restore when unloading/loading GRU contexts */ +#define DSR_BYTES(dsr) ((dsr) * GRU_DSR_AU_BYTES) +#define CBR_BYTES(cbr) ((cbr) * GRU_HANDLE_BYTES * GRU_CBR_AU_SIZE * 2) + +/* Convert a user CB number to the actual CBRNUM */ +#define thread_cbr_number(gts, n) ((gts)->ts_cbr_idx[(n) / GRU_CBR_AU_SIZE] \ + * GRU_CBR_AU_SIZE + (n) % GRU_CBR_AU_SIZE) + +/* Convert a gid to a pointer to the GRU */ +#define GID_TO_GRU(gid) \ + (gru_base[(gid) / GRU_CHIPLETS_PER_BLADE] ? \ + (&gru_base[(gid) / GRU_CHIPLETS_PER_BLADE]-> \ + bs_grus[(gid) % GRU_CHIPLETS_PER_BLADE]) : \ + NULL) + +/* Scan all active GRUs in a GRU bitmap */ +#define for_each_gru_in_bitmap(gid, map) \ + for ((gid) = find_first_bit((map), GRU_MAX_GRUS); (gid) < GRU_MAX_GRUS;\ + (gid)++, (gid) = find_next_bit((map), GRU_MAX_GRUS, (gid))) + +/* Scan all active GRUs on a specific blade */ +#define for_each_gru_on_blade(gru, nid, i) \ + for ((gru) = gru_base[nid]->bs_grus, (i) = 0; \ + (i) < GRU_CHIPLETS_PER_BLADE; \ + (i)++, (gru)++) + +/* Scan all active GTSs on a gru. Note: must hold ss_lock to use this macro. */ +#define for_each_gts_on_gru(gts, gru, ctxnum) \ + for ((ctxnum) = 0; (ctxnum) < GRU_NUM_CCH; (ctxnum)++) \ + if (((gts) = (gru)->gs_gts[ctxnum])) + +/* Scan each CBR whose bit is set in a TFM (or copy of) */ +#define for_each_cbr_in_tfm(i, map) \ + for ((i) = find_first_bit(map, GRU_NUM_CBE); \ + (i) < GRU_NUM_CBE; \ + (i)++, (i) = find_next_bit(map, GRU_NUM_CBE, i)) + +/* Scan each CBR in a CBR bitmap. Note: multiple CBRs in an allocation unit */ +#define for_each_cbr_in_allocation_map(i, map, k) \ + for ((k) = find_first_bit(map, GRU_CBR_AU); (k) < GRU_CBR_AU; \ + (k) = find_next_bit(map, GRU_CBR_AU, (k) + 1)) \ + for ((i) = (k)*GRU_CBR_AU_SIZE; \ + (i) < ((k) + 1) * GRU_CBR_AU_SIZE; (i)++) + +/* Scan each DSR in a DSR bitmap. Note: multiple DSRs in an allocation unit */ +#define for_each_dsr_in_allocation_map(i, map, k) \ + for ((k) = find_first_bit((const unsigned long *)map, GRU_DSR_AU);\ + (k) < GRU_DSR_AU; \ + (k) = find_next_bit((const unsigned long *)map, \ + GRU_DSR_AU, (k) + 1)) \ + for ((i) = (k) * GRU_DSR_AU_CL; \ + (i) < ((k) + 1) * GRU_DSR_AU_CL; (i)++) + +#define gseg_physical_address(gru, ctxnum) \ + ((gru)->gs_gru_base_paddr + ctxnum * GRU_GSEG_STRIDE) +#define gseg_virtual_address(gru, ctxnum) \ + ((gru)->gs_gru_base_vaddr + ctxnum * GRU_GSEG_STRIDE) + +/*----------------------------------------------------------------------------- + * Lock / Unlock GRU handles + * Use the "delresp" bit in the handle as a "lock" bit. + */ + +/* Lock hierarchy checking enabled only in emulator */ + +static inline void __lock_handle(void *h) +{ + while (test_and_set_bit(1, h)) + cpu_relax(); +} + +static inline void __unlock_handle(void *h) +{ + clear_bit(1, h); +} + +static inline void lock_cch_handle(struct gru_context_configuration_handle *cch) +{ + __lock_handle(cch); +} + +static inline void unlock_cch_handle(struct gru_context_configuration_handle + *cch) +{ + __unlock_handle(cch); +} + +static inline void lock_tgh_handle(struct gru_tlb_global_handle *tgh) +{ + __lock_handle(tgh); +} + +static inline void unlock_tgh_handle(struct gru_tlb_global_handle *tgh) +{ + __unlock_handle(tgh); +} + +/*----------------------------------------------------------------------------- + * Function prototypes & externs + */ +struct gru_unload_context_req; + +extern struct vm_operations_struct gru_vm_ops; +extern struct device *grudev; + +extern struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma, + int tsid); +extern struct gru_thread_state *gru_find_thread_state(struct vm_area_struct + *vma, int tsid); +extern struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct + *vma, int tsid); +extern void gru_unload_context(struct gru_thread_state *gts, int savestate); +extern void gts_drop(struct gru_thread_state *gts); +extern void gru_tgh_flush_init(struct gru_state *gru); +extern int gru_kservices_init(struct gru_state *gru); +extern irqreturn_t gru_intr(int irq, void *dev_id); +extern int gru_handle_user_call_os(unsigned long address); +extern int gru_user_flush_tlb(unsigned long arg); +extern int gru_user_unload_context(unsigned long arg); +extern int gru_get_exception_detail(unsigned long arg); +extern int gru_set_task_slice(long address); +extern int gru_cpu_fault_map_id(void); +extern struct vm_area_struct *gru_find_vma(unsigned long vaddr); +extern void gru_flush_all_tlb(struct gru_state *gru); +extern int gru_proc_init(void); +extern void gru_proc_exit(void); + +extern unsigned long reserve_gru_cb_resources(struct gru_state *gru, + int cbr_au_count, char *cbmap); +extern unsigned long reserve_gru_ds_resources(struct gru_state *gru, + int dsr_au_count, char *dsmap); +extern int gru_fault(struct vm_area_struct *, struct vm_fault *vmf); +extern struct gru_mm_struct *gru_register_mmu_notifier(void); +extern void gru_drop_mmu_notifier(struct gru_mm_struct *gms); + +extern void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start, + unsigned long len); + +extern unsigned long options; + +#endif /* __GRUTABLES_H__ */ -- GitLab From b2fb06fcb6d6c9912b43e61394891e3994d4b613 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:33:56 -0700 Subject: [PATCH 0378/1024] GRU Driver: kernel services header files This patch contains the header file used to export GRU services to other kernel drivers such as XPMEM or XPNET. Signed-off-by: Jack Steiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/grukservices.h | 134 ++++++++++++++++++++++++++++ 1 file changed, 134 insertions(+) create mode 100644 drivers/misc/sgi-gru/grukservices.h diff --git a/drivers/misc/sgi-gru/grukservices.h b/drivers/misc/sgi-gru/grukservices.h new file mode 100644 index 00000000000..eb17e0a3ac6 --- /dev/null +++ b/drivers/misc/sgi-gru/grukservices.h @@ -0,0 +1,134 @@ + +/* + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __GRU_KSERVICES_H_ +#define __GRU_KSERVICES_H_ + + +/* + * Message queues using the GRU to send/receive messages. + * + * These function allow the user to create a message queue for + * sending/receiving 1 or 2 cacheline messages using the GRU. + * + * Processes SENDING messages will use a kernel CBR/DSR to send + * the message. This is transparent to the caller. + * + * The receiver does not use any GRU resources. + * + * The functions support: + * - single receiver + * - multiple senders + * - cross partition message + * + * Missing features ZZZ: + * - user options for dealing with timeouts, queue full, etc. + * - gru_create_message_queue() needs interrupt vector info + */ + +/* + * Initialize a user allocated chunk of memory to be used as + * a message queue. The caller must ensure that the queue is + * in contiguous physical memory and is cacheline aligned. + * + * Message queue size is the total number of bytes allocated + * to the queue including a 2 cacheline header that is used + * to manage the queue. + * + * Input: + * p pointer to user allocated memory. + * bytes size of message queue in bytes + * + * Errors: + * 0 OK + * >0 error + */ +extern int gru_create_message_queue(void *p, unsigned int bytes); + +/* + * Send a message to a message queue. + * + * Note: The message queue transport mechanism uses the first 32 + * bits of the message. Users should avoid using these bits. + * + * + * Input: + * xmq message queue - must be a UV global physical address + * mesg pointer to message. Must be 64-bit aligned + * bytes size of message in bytes + * + * Output: + * 0 message sent + * >0 Send failure - see error codes below + * + */ +extern int gru_send_message_gpa(unsigned long mq_gpa, void *mesg, + unsigned int bytes); + +/* Status values for gru_send_message() */ +#define MQE_OK 0 /* message sent successfully */ +#define MQE_CONGESTION 1 /* temporary congestion, try again */ +#define MQE_QUEUE_FULL 2 /* queue is full */ +#define MQE_UNEXPECTED_CB_ERR 3 /* unexpected CB error */ +#define MQE_PAGE_OVERFLOW 10 /* BUG - queue overflowed a page */ +#define MQE_BUG_NO_RESOURCES 11 /* BUG - could not alloc GRU cb/dsr */ + +/* + * Advance the receive pointer for the message queue to the next message. + * Note: current API requires messages to be gotten & freed in order. Future + * API extensions may allow for out-of-order freeing. + * + * Input + * mq message queue + * mesq message being freed + */ +extern void gru_free_message(void *mq, void *mesq); + +/* + * Get next message from message queue. Returns pointer to + * message OR NULL if no message present. + * User must call gru_free_message() after message is processed + * in order to move the queue pointers to next message. + * + * Input + * mq message queue + * + * Output: + * p pointer to message + * NULL no message available + */ +extern void *gru_get_next_message(void *mq); + + +/* + * Copy data using the GRU. Source or destination can be located in a remote + * partition. + * + * Input: + * dest_gpa destination global physical address + * src_gpa source global physical address + * bytes number of bytes to copy + * + * Output: + * 0 OK + * >0 error + */ +extern int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa, + unsigned int bytes); + +#endif /* __GRU_KSERVICES_H_ */ -- GitLab From 78cf1de49b11c0e2edb35cce91ac6c279cc852b3 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:33:56 -0700 Subject: [PATCH 0379/1024] GRU Driver: driver initialization, file & vma ops This file contains the functions for initializing the driver, handling file & vma operations and for processing IOCTL requests from the user. Signed-off-by: Jack Steiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/grufile.c | 481 +++++++++++++++++++++++++++++++++ 1 file changed, 481 insertions(+) create mode 100644 drivers/misc/sgi-gru/grufile.c diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c new file mode 100644 index 00000000000..09c9c65ff9d --- /dev/null +++ b/drivers/misc/sgi-gru/grufile.c @@ -0,0 +1,481 @@ +/* + * SN Platform GRU Driver + * + * FILE OPERATIONS & DRIVER INITIALIZATION + * + * This file supports the user system call for file open, close, mmap, etc. + * This also incudes the driver initialization code. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "gru.h" +#include "grulib.h" +#include "grutables.h" + +#if defined CONFIG_X86_64 +#include +#include +#define IS_UV() is_uv_system() +#elif defined CONFIG_IA64 +#include +#include +/* temp support for running on hardware simulator */ +#define IS_UV() IS_MEDUSA() || ia64_platform_is("uv") +#else +#define IS_UV() 0 +#endif + +#include +#include + +struct gru_blade_state *gru_base[GRU_MAX_BLADES] __read_mostly; +unsigned long gru_start_paddr, gru_end_paddr __read_mostly; +struct gru_stats_s gru_stats; + +/* Guaranteed user available resources on each node */ +static int max_user_cbrs, max_user_dsr_bytes; + +static struct file_operations gru_fops; +static struct miscdevice gru_miscdev; + + +/* + * gru_vma_close + * + * Called when unmapping a device mapping. Frees all gru resources + * and tables belonging to the vma. + */ +static void gru_vma_close(struct vm_area_struct *vma) +{ + struct gru_vma_data *vdata; + struct gru_thread_state *gts; + struct list_head *entry, *next; + + if (!vma->vm_private_data) + return; + + vdata = vma->vm_private_data; + vma->vm_private_data = NULL; + gru_dbg(grudev, "vma %p, file %p, vdata %p\n", vma, vma->vm_file, + vdata); + list_for_each_safe(entry, next, &vdata->vd_head) { + gts = + list_entry(entry, struct gru_thread_state, ts_next); + list_del(>s->ts_next); + mutex_lock(>s->ts_ctxlock); + if (gts->ts_gru) + gru_unload_context(gts, 0); + mutex_unlock(>s->ts_ctxlock); + gts_drop(gts); + } + kfree(vdata); + STAT(vdata_free); +} + +/* + * gru_file_mmap + * + * Called when mmaping the device. Initializes the vma with a fault handler + * and private data structure necessary to allocate, track, and free the + * underlying pages. + */ +static int gru_file_mmap(struct file *file, struct vm_area_struct *vma) +{ + if ((vma->vm_flags & (VM_SHARED | VM_WRITE)) != (VM_SHARED | VM_WRITE)) + return -EPERM; + + vma->vm_flags |= + (VM_IO | VM_DONTCOPY | VM_LOCKED | VM_DONTEXPAND | VM_PFNMAP | + VM_RESERVED); + vma->vm_page_prot = PAGE_SHARED; + vma->vm_ops = &gru_vm_ops; + + vma->vm_private_data = gru_alloc_vma_data(vma, 0); + if (!vma->vm_private_data) + return -ENOMEM; + + gru_dbg(grudev, "file %p, vaddr 0x%lx, vma %p, vdata %p\n", + file, vma->vm_start, vma, vma->vm_private_data); + return 0; +} + +/* + * Create a new GRU context + */ +static int gru_create_new_context(unsigned long arg) +{ + struct gru_create_context_req req; + struct vm_area_struct *vma; + struct gru_vma_data *vdata; + int ret = -EINVAL; + + + if (copy_from_user(&req, (void __user *)arg, sizeof(req))) + return -EFAULT; + + if (req.data_segment_bytes == 0 || + req.data_segment_bytes > max_user_dsr_bytes) + return -EINVAL; + if (!req.control_blocks || !req.maximum_thread_count || + req.control_blocks > max_user_cbrs) + return -EINVAL; + + if (!(req.options & GRU_OPT_MISS_MASK)) + req.options |= GRU_OPT_MISS_FMM_INTR; + + down_write(¤t->mm->mmap_sem); + vma = gru_find_vma(req.gseg); + if (vma) { + vdata = vma->vm_private_data; + vdata->vd_user_options = req.options; + vdata->vd_dsr_au_count = + GRU_DS_BYTES_TO_AU(req.data_segment_bytes); + vdata->vd_cbr_au_count = GRU_CB_COUNT_TO_AU(req.control_blocks); + ret = 0; + } + up_write(¤t->mm->mmap_sem); + + return ret; +} + +/* + * Get GRU configuration info (temp - for emulator testing) + */ +static long gru_get_config_info(unsigned long arg) +{ + struct gru_config_info info; + int nodesperblade; + + if (num_online_nodes() > 1 && + (uv_node_to_blade_id(1) == uv_node_to_blade_id(0))) + nodesperblade = 2; + else + nodesperblade = 1; + info.cpus = num_online_cpus(); + info.nodes = num_online_nodes(); + info.blades = info.nodes / nodesperblade; + info.chiplets = GRU_CHIPLETS_PER_BLADE * info.blades; + + if (copy_to_user((void __user *)arg, &info, sizeof(info))) + return -EFAULT; + return 0; +} + +/* + * Get GRU chiplet status + */ +static long gru_get_chiplet_status(unsigned long arg) +{ + struct gru_state *gru; + struct gru_chiplet_info info; + + if (copy_from_user(&info, (void __user *)arg, sizeof(info))) + return -EFAULT; + + if (info.node == -1) + info.node = numa_node_id(); + if (info.node >= num_possible_nodes() || + info.chiplet >= GRU_CHIPLETS_PER_HUB || + info.node < 0 || info.chiplet < 0) + return -EINVAL; + + info.blade = uv_node_to_blade_id(info.node); + gru = get_gru(info.blade, info.chiplet); + + info.total_dsr_bytes = GRU_NUM_DSR_BYTES; + info.total_cbr = GRU_NUM_CB; + info.total_user_dsr_bytes = GRU_NUM_DSR_BYTES - + gru->gs_reserved_dsr_bytes; + info.total_user_cbr = GRU_NUM_CB - gru->gs_reserved_cbrs; + info.free_user_dsr_bytes = hweight64(gru->gs_dsr_map) * + GRU_DSR_AU_BYTES; + info.free_user_cbr = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE; + + if (copy_to_user((void __user *)arg, &info, sizeof(info))) + return -EFAULT; + return 0; +} + +/* + * gru_file_unlocked_ioctl + * + * Called to update file attributes via IOCTL calls. + */ +static long gru_file_unlocked_ioctl(struct file *file, unsigned int req, + unsigned long arg) +{ + int err = -EBADRQC; + + gru_dbg(grudev, "file %p\n", file); + + switch (req) { + case GRU_CREATE_CONTEXT: + err = gru_create_new_context(arg); + break; + case GRU_SET_TASK_SLICE: + err = gru_set_task_slice(arg); + break; + case GRU_USER_GET_EXCEPTION_DETAIL: + err = gru_get_exception_detail(arg); + break; + case GRU_USER_UNLOAD_CONTEXT: + err = gru_user_unload_context(arg); + break; + case GRU_GET_CHIPLET_STATUS: + err = gru_get_chiplet_status(arg); + break; + case GRU_USER_FLUSH_TLB: + err = gru_user_flush_tlb(arg); + break; + case GRU_USER_CALL_OS: + err = gru_handle_user_call_os(arg); + break; + case GRU_GET_CONFIG_INFO: + err = gru_get_config_info(arg); + break; + } + return err; +} + +/* + * Called at init time to build tables for all GRUs that are present in the + * system. + */ +static void gru_init_chiplet(struct gru_state *gru, unsigned long paddr, + void *vaddr, int nid, int bid, int grunum) +{ + spin_lock_init(&gru->gs_lock); + spin_lock_init(&gru->gs_asid_lock); + gru->gs_gru_base_paddr = paddr; + gru->gs_gru_base_vaddr = vaddr; + gru->gs_gid = bid * GRU_CHIPLETS_PER_BLADE + grunum; + gru->gs_blade = gru_base[bid]; + gru->gs_blade_id = bid; + gru->gs_cbr_map = (GRU_CBR_AU == 64) ? ~0 : (1UL << GRU_CBR_AU) - 1; + gru->gs_dsr_map = (1UL << GRU_DSR_AU) - 1; + gru_tgh_flush_init(gru); + gru_dbg(grudev, "bid %d, nid %d, gru %x, vaddr %p (0x%lx)\n", + bid, nid, gru->gs_gid, gru->gs_gru_base_vaddr, + gru->gs_gru_base_paddr); + gru_kservices_init(gru); +} + +static int gru_init_tables(unsigned long gru_base_paddr, void *gru_base_vaddr) +{ + int pnode, nid, bid, chip; + int cbrs, dsrbytes, n; + int order = get_order(sizeof(struct gru_blade_state)); + struct page *page; + struct gru_state *gru; + unsigned long paddr; + void *vaddr; + + max_user_cbrs = GRU_NUM_CB; + max_user_dsr_bytes = GRU_NUM_DSR_BYTES; + for_each_online_node(nid) { + bid = uv_node_to_blade_id(nid); + pnode = uv_node_to_pnode(nid); + if (gru_base[bid]) + continue; + page = alloc_pages_node(nid, GFP_KERNEL, order); + if (!page) + goto fail; + gru_base[bid] = page_address(page); + memset(gru_base[bid], 0, sizeof(struct gru_blade_state)); + gru_base[bid]->bs_lru_gru = &gru_base[bid]->bs_grus[0]; + spin_lock_init(&gru_base[bid]->bs_lock); + + dsrbytes = 0; + cbrs = 0; + for (gru = gru_base[bid]->bs_grus, chip = 0; + chip < GRU_CHIPLETS_PER_BLADE; + chip++, gru++) { + paddr = gru_chiplet_paddr(gru_base_paddr, pnode, chip); + vaddr = gru_chiplet_vaddr(gru_base_vaddr, pnode, chip); + gru_init_chiplet(gru, paddr, vaddr, bid, nid, chip); + n = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE; + cbrs = max(cbrs, n); + n = hweight64(gru->gs_dsr_map) * GRU_DSR_AU_BYTES; + dsrbytes = max(dsrbytes, n); + } + max_user_cbrs = min(max_user_cbrs, cbrs); + max_user_dsr_bytes = min(max_user_dsr_bytes, dsrbytes); + } + + return 0; + +fail: + for (nid--; nid >= 0; nid--) + free_pages((unsigned long)gru_base[nid], order); + return -ENOMEM; +} + +#ifdef CONFIG_IA64 + +static int get_base_irq(void) +{ + return IRQ_GRU; +} + +#elif defined CONFIG_X86_64 + +static void noop(unsigned int irq) +{ +} + +static struct irq_chip gru_chip = { + .name = "gru", + .mask = noop, + .unmask = noop, + .ack = noop, +}; + +static int get_base_irq(void) +{ + set_irq_chip(IRQ_GRU, &gru_chip); + set_irq_chip(IRQ_GRU + 1, &gru_chip); + return IRQ_GRU; +} +#endif + +/* + * gru_init + * + * Called at boot or module load time to initialize the GRUs. + */ +static int __init gru_init(void) +{ + int ret, irq, chip; + char id[10]; + void *gru_start_vaddr; + + if (!IS_UV()) + return 0; + +#if defined CONFIG_IA64 + gru_start_paddr = 0xd000000000UL; /* ZZZZZZZZZZZZZZZZZZZ fixme */ +#else + gru_start_paddr = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR) & + 0x7fffffffffffUL; + +#endif + gru_start_vaddr = __va(gru_start_paddr); + gru_end_paddr = gru_start_paddr + MAX_NUMNODES * GRU_SIZE; + printk(KERN_INFO "GRU space: 0x%lx - 0x%lx\n", + gru_start_paddr, gru_end_paddr); + irq = get_base_irq(); + for (chip = 0; chip < GRU_CHIPLETS_PER_BLADE; chip++) { + ret = request_irq(irq + chip, gru_intr, 0, id, NULL); + if (ret) { + printk(KERN_ERR "%s: request_irq failed\n", + GRU_DRIVER_ID_STR); + goto exit1; + } + } + + ret = misc_register(&gru_miscdev); + if (ret) { + printk(KERN_ERR "%s: misc_register failed\n", + GRU_DRIVER_ID_STR); + goto exit1; + } + + ret = gru_proc_init(); + if (ret) { + printk(KERN_ERR "%s: proc init failed\n", GRU_DRIVER_ID_STR); + goto exit2; + } + + ret = gru_init_tables(gru_start_paddr, gru_start_vaddr); + if (ret) { + printk(KERN_ERR "%s: init tables failed\n", GRU_DRIVER_ID_STR); + goto exit3; + } + + printk(KERN_INFO "%s: v%s\n", GRU_DRIVER_ID_STR, + GRU_DRIVER_VERSION_STR); + return 0; + +exit3: + gru_proc_exit(); +exit2: + misc_deregister(&gru_miscdev); +exit1: + for (--chip; chip >= 0; chip--) + free_irq(irq + chip, NULL); + return ret; + +} + +static void __exit gru_exit(void) +{ + int i, bid; + int order = get_order(sizeof(struct gru_state) * + GRU_CHIPLETS_PER_BLADE); + + for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++) + free_irq(IRQ_GRU + i, NULL); + + for (bid = 0; bid < GRU_MAX_BLADES; bid++) + free_pages((unsigned long)gru_base[bid], order); + + misc_deregister(&gru_miscdev); + gru_proc_exit(); +} + +static struct file_operations gru_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = gru_file_unlocked_ioctl, + .mmap = gru_file_mmap, +}; + +static struct miscdevice gru_miscdev = { + .minor = MISC_DYNAMIC_MINOR, + .name = "gru", + .fops = &gru_fops, +}; + +struct vm_operations_struct gru_vm_ops = { + .close = gru_vma_close, + .fault = gru_fault, +}; + +module_init(gru_init); +module_exit(gru_exit); + +module_param(options, ulong, 0644); +MODULE_PARM_DESC(options, "Various debug options"); + +MODULE_AUTHOR("Silicon Graphics, Inc."); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(GRU_DRIVER_ID_STR GRU_DRIVER_VERSION_STR); +MODULE_VERSION(GRU_DRIVER_VERSION_STR); + -- GitLab From 142586409c8be7dc071bb94d7cd2d69ccfd99b6b Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:33:57 -0700 Subject: [PATCH 0380/1024] GRU Driver: page faults & exceptions This file contains the functions that manage GRU page faults and exceptions. Signed-off-by: Jack Steiner Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/grufault.c | 633 ++++++++++++++++++++++++++++++++ 1 file changed, 633 insertions(+) create mode 100644 drivers/misc/sgi-gru/grufault.c diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c new file mode 100644 index 00000000000..3d33015bbf3 --- /dev/null +++ b/drivers/misc/sgi-gru/grufault.c @@ -0,0 +1,633 @@ +/* + * SN Platform GRU Driver + * + * FAULT HANDLER FOR GRU DETECTED TLB MISSES + * + * This file contains code that handles TLB misses within the GRU. + * These misses are reported either via interrupts or user polling of + * the user CB. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "gru.h" +#include "grutables.h" +#include "grulib.h" +#include "gru_instructions.h" +#include + +/* + * Test if a physical address is a valid GRU GSEG address + */ +static inline int is_gru_paddr(unsigned long paddr) +{ + return paddr >= gru_start_paddr && paddr < gru_end_paddr; +} + +/* + * Find the vma of a GRU segment. Caller must hold mmap_sem. + */ +struct vm_area_struct *gru_find_vma(unsigned long vaddr) +{ + struct vm_area_struct *vma; + + vma = find_vma(current->mm, vaddr); + if (vma && vma->vm_start <= vaddr && vma->vm_ops == &gru_vm_ops) + return vma; + return NULL; +} + +/* + * Find and lock the gts that contains the specified user vaddr. + * + * Returns: + * - *gts with the mmap_sem locked for read and the GTS locked. + * - NULL if vaddr invalid OR is not a valid GSEG vaddr. + */ + +static struct gru_thread_state *gru_find_lock_gts(unsigned long vaddr) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + struct gru_thread_state *gts = NULL; + + down_read(&mm->mmap_sem); + vma = gru_find_vma(vaddr); + if (vma) + gts = gru_find_thread_state(vma, TSID(vaddr, vma)); + if (gts) + mutex_lock(>s->ts_ctxlock); + else + up_read(&mm->mmap_sem); + return gts; +} + +static struct gru_thread_state *gru_alloc_locked_gts(unsigned long vaddr) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + struct gru_thread_state *gts = NULL; + + down_write(&mm->mmap_sem); + vma = gru_find_vma(vaddr); + if (vma) + gts = gru_alloc_thread_state(vma, TSID(vaddr, vma)); + if (gts) { + mutex_lock(>s->ts_ctxlock); + downgrade_write(&mm->mmap_sem); + } else { + up_write(&mm->mmap_sem); + } + + return gts; +} + +/* + * Unlock a GTS that was previously locked with gru_find_lock_gts(). + */ +static void gru_unlock_gts(struct gru_thread_state *gts) +{ + mutex_unlock(>s->ts_ctxlock); + up_read(¤t->mm->mmap_sem); +} + +/* + * Set a CB.istatus to active using a user virtual address. This must be done + * just prior to a TFH RESTART. The new cb.istatus is an in-cache status ONLY. + * If the line is evicted, the status may be lost. The in-cache update + * is necessary to prevent the user from seeing a stale cb.istatus that will + * change as soon as the TFH restart is complete. Races may cause an + * occasional failure to clear the cb.istatus, but that is ok. + * + * If the cb address is not valid (should not happen, but...), nothing + * bad will happen.. The get_user()/put_user() will fail but there + * are no bad side-effects. + */ +static void gru_cb_set_istatus_active(unsigned long __user *cb) +{ + union { + struct gru_instruction_bits bits; + unsigned long dw; + } u; + + if (cb) { + get_user(u.dw, cb); + u.bits.istatus = CBS_ACTIVE; + put_user(u.dw, cb); + } +} + +/* + * Convert a interrupt IRQ to a pointer to the GRU GTS that caused the + * interrupt. Interrupts are always sent to a cpu on the blade that contains the + * GRU (except for headless blades which are not currently supported). A blade + * has N grus; a block of N consecutive IRQs is assigned to the GRUs. The IRQ + * number uniquely identifies the GRU chiplet on the local blade that caused the + * interrupt. Always called in interrupt context. + */ +static inline struct gru_state *irq_to_gru(int irq) +{ + return &gru_base[uv_numa_blade_id()]->bs_grus[irq - IRQ_GRU]; +} + +/* + * Read & clear a TFM + * + * The GRU has an array of fault maps. A map is private to a cpu + * Only one cpu will be accessing a cpu's fault map. + * + * This function scans the cpu-private fault map & clears all bits that + * are set. The function returns a bitmap that indicates the bits that + * were cleared. Note that sense the maps may be updated asynchronously by + * the GRU, atomic operations must be used to clear bits. + */ +static void get_clear_fault_map(struct gru_state *gru, + struct gru_tlb_fault_map *map) +{ + unsigned long i, k; + struct gru_tlb_fault_map *tfm; + + tfm = get_tfm_for_cpu(gru, gru_cpu_fault_map_id()); + prefetchw(tfm); /* Helps on hardware, required for emulator */ + for (i = 0; i < BITS_TO_LONGS(GRU_NUM_CBE); i++) { + k = tfm->fault_bits[i]; + if (k) + k = xchg(&tfm->fault_bits[i], 0UL); + map->fault_bits[i] = k; + } + + /* + * Not functionally required but helps performance. (Required + * on emulator) + */ + gru_flush_cache(tfm); +} + +/* + * Atomic (interrupt context) & non-atomic (user context) functions to + * convert a vaddr into a physical address. The size of the page + * is returned in pageshift. + * returns: + * 0 - successful + * < 0 - error code + * 1 - (atomic only) try again in non-atomic context + */ +static int non_atomic_pte_lookup(struct vm_area_struct *vma, + unsigned long vaddr, int write, + unsigned long *paddr, int *pageshift) +{ + struct page *page; + + /* ZZZ Need to handle HUGE pages */ + if (is_vm_hugetlb_page(vma)) + return -EFAULT; + *pageshift = PAGE_SHIFT; + if (get_user_pages + (current, current->mm, vaddr, 1, write, 0, &page, NULL) <= 0) + return -EFAULT; + *paddr = page_to_phys(page); + put_page(page); + return 0; +} + +/* + * + * atomic_pte_lookup + * + * Convert a user virtual address to a physical address + * Only supports Intel large pages (2MB only) on x86_64. + * ZZZ - hugepage support is incomplete + */ +static int atomic_pte_lookup(struct vm_area_struct *vma, unsigned long vaddr, + int write, unsigned long *paddr, int *pageshift) +{ + pgd_t *pgdp; + pmd_t *pmdp; + pud_t *pudp; + pte_t pte; + + WARN_ON(irqs_disabled()); /* ZZZ debug */ + + local_irq_disable(); + pgdp = pgd_offset(vma->vm_mm, vaddr); + if (unlikely(pgd_none(*pgdp))) + goto err; + + pudp = pud_offset(pgdp, vaddr); + if (unlikely(pud_none(*pudp))) + goto err; + + pmdp = pmd_offset(pudp, vaddr); + if (unlikely(pmd_none(*pmdp))) + goto err; +#ifdef CONFIG_X86_64 + if (unlikely(pmd_large(*pmdp))) + pte = *(pte_t *) pmdp; + else +#endif + pte = *pte_offset_kernel(pmdp, vaddr); + + local_irq_enable(); + + if (unlikely(!pte_present(pte) || + (write && (!pte_write(pte) || !pte_dirty(pte))))) + return 1; + + *paddr = pte_pfn(pte) << PAGE_SHIFT; + *pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT; + return 0; + +err: + local_irq_enable(); + return 1; +} + +/* + * Drop a TLB entry into the GRU. The fault is described by info in an TFH. + * Input: + * cb Address of user CBR. Null if not running in user context + * Return: + * 0 = dropin, exception, or switch to UPM successful + * 1 = range invalidate active + * < 0 = error code + * + */ +static int gru_try_dropin(struct gru_thread_state *gts, + struct gru_tlb_fault_handle *tfh, + unsigned long __user *cb) +{ + struct mm_struct *mm = gts->ts_mm; + struct vm_area_struct *vma; + int pageshift, asid, write, ret; + unsigned long paddr, gpa, vaddr; + + /* + * NOTE: The GRU contains magic hardware that eliminates races between + * TLB invalidates and TLB dropins. If an invalidate occurs + * in the window between reading the TFH and the subsequent TLB dropin, + * the dropin is ignored. This eliminates the need for additional locks. + */ + + /* + * Error if TFH state is IDLE or FMM mode & the user issuing a UPM call. + * Might be a hardware race OR a stupid user. Ignore FMM because FMM + * is a transient state. + */ + if (tfh->state == TFHSTATE_IDLE) + goto failidle; + if (tfh->state == TFHSTATE_MISS_FMM && cb) + goto failfmm; + + write = (tfh->cause & TFHCAUSE_TLB_MOD) != 0; + vaddr = tfh->missvaddr; + asid = tfh->missasid; + if (asid == 0) + goto failnoasid; + + rmb(); /* TFH must be cache resident before reading ms_range_active */ + + /* + * TFH is cache resident - at least briefly. Fail the dropin + * if a range invalidate is active. + */ + if (atomic_read(>s->ts_gms->ms_range_active)) + goto failactive; + + vma = find_vma(mm, vaddr); + if (!vma) + goto failinval; + + /* + * Atomic lookup is faster & usually works even if called in non-atomic + * context. + */ + ret = atomic_pte_lookup(vma, vaddr, write, &paddr, &pageshift); + if (ret) { + if (!cb) + goto failupm; + if (non_atomic_pte_lookup(vma, vaddr, write, &paddr, + &pageshift)) + goto failinval; + } + if (is_gru_paddr(paddr)) + goto failinval; + + paddr = paddr & ~((1UL << pageshift) - 1); + gpa = uv_soc_phys_ram_to_gpa(paddr); + gru_cb_set_istatus_active(cb); + tfh_write_restart(tfh, gpa, GAA_RAM, vaddr, asid, write, + GRU_PAGESIZE(pageshift)); + STAT(tlb_dropin); + gru_dbg(grudev, + "%s: tfh 0x%p, vaddr 0x%lx, asid 0x%x, ps %d, gpa 0x%lx\n", + ret ? "non-atomic" : "atomic", tfh, vaddr, asid, + pageshift, gpa); + return 0; + +failnoasid: + /* No asid (delayed unload). */ + STAT(tlb_dropin_fail_no_asid); + gru_dbg(grudev, "FAILED no_asid tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr); + if (!cb) + tfh_user_polling_mode(tfh); + else + gru_flush_cache(tfh); + return -EAGAIN; + +failupm: + /* Atomic failure switch CBR to UPM */ + tfh_user_polling_mode(tfh); + STAT(tlb_dropin_fail_upm); + gru_dbg(grudev, "FAILED upm tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr); + return 1; + +failfmm: + /* FMM state on UPM call */ + STAT(tlb_dropin_fail_fmm); + gru_dbg(grudev, "FAILED fmm tfh: 0x%p, state %d\n", tfh, tfh->state); + return 0; + +failidle: + /* TFH was idle - no miss pending */ + gru_flush_cache(tfh); + if (cb) + gru_flush_cache(cb); + STAT(tlb_dropin_fail_idle); + gru_dbg(grudev, "FAILED idle tfh: 0x%p, state %d\n", tfh, tfh->state); + return 0; + +failinval: + /* All errors (atomic & non-atomic) switch CBR to EXCEPTION state */ + tfh_exception(tfh); + STAT(tlb_dropin_fail_invalid); + gru_dbg(grudev, "FAILED inval tfh: 0x%p, vaddr 0x%lx\n", tfh, vaddr); + return -EFAULT; + +failactive: + /* Range invalidate active. Switch to UPM iff atomic */ + if (!cb) + tfh_user_polling_mode(tfh); + else + gru_flush_cache(tfh); + STAT(tlb_dropin_fail_range_active); + gru_dbg(grudev, "FAILED range active: tfh 0x%p, vaddr 0x%lx\n", + tfh, vaddr); + return 1; +} + +/* + * Process an external interrupt from the GRU. This interrupt is + * caused by a TLB miss. + * Note that this is the interrupt handler that is registered with linux + * interrupt handlers. + */ +irqreturn_t gru_intr(int irq, void *dev_id) +{ + struct gru_state *gru; + struct gru_tlb_fault_map map; + struct gru_thread_state *gts; + struct gru_tlb_fault_handle *tfh = NULL; + int cbrnum, ctxnum; + + STAT(intr); + + gru = irq_to_gru(irq); + if (!gru) { + dev_err(grudev, "GRU: invalid interrupt: cpu %d, irq %d\n", + raw_smp_processor_id(), irq); + return IRQ_NONE; + } + get_clear_fault_map(gru, &map); + gru_dbg(grudev, "irq %d, gru %x, map 0x%lx\n", irq, gru->gs_gid, + map.fault_bits[0]); + + for_each_cbr_in_tfm(cbrnum, map.fault_bits) { + tfh = get_tfh_by_index(gru, cbrnum); + prefetchw(tfh); /* Helps on hdw, required for emulator */ + + /* + * When hardware sets a bit in the faultmap, it implicitly + * locks the GRU context so that it cannot be unloaded. + * The gts cannot change until a TFH start/writestart command + * is issued. + */ + ctxnum = tfh->ctxnum; + gts = gru->gs_gts[ctxnum]; + + /* + * This is running in interrupt context. Trylock the mmap_sem. + * If it fails, retry the fault in user context. + */ + if (down_read_trylock(>s->ts_mm->mmap_sem)) { + gru_try_dropin(gts, tfh, NULL); + up_read(>s->ts_mm->mmap_sem); + } else { + tfh_user_polling_mode(tfh); + } + } + return IRQ_HANDLED; +} + + +static int gru_user_dropin(struct gru_thread_state *gts, + struct gru_tlb_fault_handle *tfh, + unsigned long __user *cb) +{ + struct gru_mm_struct *gms = gts->ts_gms; + int ret; + + while (1) { + wait_event(gms->ms_wait_queue, + atomic_read(&gms->ms_range_active) == 0); + prefetchw(tfh); /* Helps on hdw, required for emulator */ + ret = gru_try_dropin(gts, tfh, cb); + if (ret <= 0) + return ret; + STAT(call_os_wait_queue); + } +} + +/* + * This interface is called as a result of a user detecting a "call OS" bit + * in a user CB. Normally means that a TLB fault has occurred. + * cb - user virtual address of the CB + */ +int gru_handle_user_call_os(unsigned long cb) +{ + struct gru_tlb_fault_handle *tfh; + struct gru_thread_state *gts; + unsigned long __user *cbp; + int ucbnum, cbrnum, ret = -EINVAL; + + STAT(call_os); + gru_dbg(grudev, "address 0x%lx\n", cb); + + /* sanity check the cb pointer */ + ucbnum = get_cb_number((void *)cb); + if ((cb & (GRU_HANDLE_STRIDE - 1)) || ucbnum >= GRU_NUM_CB) + return -EINVAL; + cbp = (unsigned long *)cb; + + gts = gru_find_lock_gts(cb); + if (!gts) + return -EINVAL; + + if (ucbnum >= gts->ts_cbr_au_count * GRU_CBR_AU_SIZE) { + ret = -EINVAL; + goto exit; + } + + /* + * If force_unload is set, the UPM TLB fault is phony. The task + * has migrated to another node and the GSEG must be moved. Just + * unload the context. The task will page fault and assign a new + * context. + */ + ret = -EAGAIN; + cbrnum = thread_cbr_number(gts, ucbnum); + if (gts->ts_force_unload) { + gru_unload_context(gts, 1); + } else if (gts->ts_gru) { + tfh = get_tfh_by_index(gts->ts_gru, cbrnum); + ret = gru_user_dropin(gts, tfh, cbp); + } +exit: + gru_unlock_gts(gts); + return ret; +} + +/* + * Fetch the exception detail information for a CB that terminated with + * an exception. + */ +int gru_get_exception_detail(unsigned long arg) +{ + struct control_block_extended_exc_detail excdet; + struct gru_control_block_extended *cbe; + struct gru_thread_state *gts; + int ucbnum, cbrnum, ret; + + STAT(user_exception); + if (copy_from_user(&excdet, (void __user *)arg, sizeof(excdet))) + return -EFAULT; + + gru_dbg(grudev, "address 0x%lx\n", excdet.cb); + gts = gru_find_lock_gts(excdet.cb); + if (!gts) + return -EINVAL; + + if (gts->ts_gru) { + ucbnum = get_cb_number((void *)excdet.cb); + cbrnum = thread_cbr_number(gts, ucbnum); + cbe = get_cbe_by_index(gts->ts_gru, cbrnum); + excdet.opc = cbe->opccpy; + excdet.exopc = cbe->exopccpy; + excdet.ecause = cbe->ecause; + excdet.exceptdet0 = cbe->idef1upd; + excdet.exceptdet1 = cbe->idef3upd; + ret = 0; + } else { + ret = -EAGAIN; + } + gru_unlock_gts(gts); + + gru_dbg(grudev, "address 0x%lx, ecause 0x%x\n", excdet.cb, + excdet.ecause); + if (!ret && copy_to_user((void __user *)arg, &excdet, sizeof(excdet))) + ret = -EFAULT; + return ret; +} + +/* + * User request to unload a context. Content is saved for possible reload. + */ +int gru_user_unload_context(unsigned long arg) +{ + struct gru_thread_state *gts; + struct gru_unload_context_req req; + + STAT(user_unload_context); + if (copy_from_user(&req, (void __user *)arg, sizeof(req))) + return -EFAULT; + + gru_dbg(grudev, "gseg 0x%lx\n", req.gseg); + + gts = gru_find_lock_gts(req.gseg); + if (!gts) + return -EINVAL; + + if (gts->ts_gru) + gru_unload_context(gts, 1); + gru_unlock_gts(gts); + + return 0; +} + +/* + * User request to flush a range of virtual addresses from the GRU TLB + * (Mainly for testing). + */ +int gru_user_flush_tlb(unsigned long arg) +{ + struct gru_thread_state *gts; + struct gru_flush_tlb_req req; + + STAT(user_flush_tlb); + if (copy_from_user(&req, (void __user *)arg, sizeof(req))) + return -EFAULT; + + gru_dbg(grudev, "gseg 0x%lx, vaddr 0x%lx, len 0x%lx\n", req.gseg, + req.vaddr, req.len); + + gts = gru_find_lock_gts(req.gseg); + if (!gts) + return -EINVAL; + + gru_flush_tlb_range(gts->ts_gms, req.vaddr, req.vaddr + req.len); + gru_unlock_gts(gts); + + return 0; +} + +/* + * Register the current task as the user of the GSEG slice. + * Needed for TLB fault interrupt targeting. + */ +int gru_set_task_slice(long address) +{ + struct gru_thread_state *gts; + + STAT(set_task_slice); + gru_dbg(grudev, "address 0x%lx\n", address); + gts = gru_alloc_locked_gts(address); + if (!gts) + return -EINVAL; + + gts->ts_tgid_owner = current->tgid; + gru_unlock_gts(gts); + + return 0; +} -- GitLab From 28bffaf094a6d0992c85e1b01f04c9b0f56c9d62 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:33:57 -0700 Subject: [PATCH 0381/1024] GRU Driver: kernel services provide by driver This file contains functions for handling services provided to other kernel modules that use the GRU. Signed-off-by: Jack Steiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/grukservices.c | 679 ++++++++++++++++++++++++++++ 1 file changed, 679 insertions(+) create mode 100644 drivers/misc/sgi-gru/grukservices.c diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c new file mode 100644 index 00000000000..234d165fb11 --- /dev/null +++ b/drivers/misc/sgi-gru/grukservices.c @@ -0,0 +1,679 @@ +/* + * SN Platform GRU Driver + * + * KERNEL SERVICES THAT USE THE GRU + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "gru.h" +#include "grulib.h" +#include "grutables.h" +#include "grukservices.h" +#include "gru_instructions.h" +#include + +/* + * Kernel GRU Usage + * + * The following is an interim algorithm for management of kernel GRU + * resources. This will likely be replaced when we better understand the + * kernel/user requirements. + * + * At boot time, the kernel permanently reserves a fixed number of + * CBRs/DSRs for each cpu to use. The resources are all taken from + * the GRU chiplet 1 on the blade. This leaves the full set of resources + * of chiplet 0 available to be allocated to a single user. + */ + +/* Blade percpu resources PERMANENTLY reserved for kernel use */ +#define GRU_NUM_KERNEL_CBR 1 +#define GRU_NUM_KERNEL_DSR_BYTES 256 +#define KERNEL_CTXNUM 15 + +/* GRU instruction attributes for all instructions */ +#define IMA IMA_CB_DELAY + +/* GRU cacheline size is always 64 bytes - even on arches with 128 byte lines */ +#define __gru_cacheline_aligned__ \ + __attribute__((__aligned__(GRU_CACHE_LINE_BYTES))) + +#define MAGIC 0x1234567887654321UL + +/* Default retry count for GRU errors on kernel instructions */ +#define EXCEPTION_RETRY_LIMIT 3 + +/* Status of message queue sections */ +#define MQS_EMPTY 0 +#define MQS_FULL 1 +#define MQS_NOOP 2 + +/*----------------- RESOURCE MANAGEMENT -------------------------------------*/ +/* optimized for x86_64 */ +struct message_queue { + union gru_mesqhead head __gru_cacheline_aligned__; /* CL 0 */ + int qlines; /* DW 1 */ + long hstatus[2]; + void *next __gru_cacheline_aligned__;/* CL 1 */ + void *limit; + void *start; + void *start2; + char data ____cacheline_aligned; /* CL 2 */ +}; + +/* First word in every message - used by mesq interface */ +struct message_header { + char present; + char present2; + char lines; + char fill; +}; + +#define QLINES(mq) ((mq) + offsetof(struct message_queue, qlines)) +#define HSTATUS(mq, h) ((mq) + offsetof(struct message_queue, hstatus[h])) + +static int gru_get_cpu_resources(int dsr_bytes, void **cb, void **dsr) +{ + struct gru_blade_state *bs; + int lcpu; + + BUG_ON(dsr_bytes > GRU_NUM_KERNEL_DSR_BYTES); + preempt_disable(); + bs = gru_base[uv_numa_blade_id()]; + lcpu = uv_blade_processor_id(); + *cb = bs->kernel_cb + lcpu * GRU_HANDLE_STRIDE; + *dsr = bs->kernel_dsr + lcpu * GRU_NUM_KERNEL_DSR_BYTES; + return 0; +} + +static void gru_free_cpu_resources(void *cb, void *dsr) +{ + preempt_enable(); +} + +int gru_get_cb_exception_detail(void *cb, + struct control_block_extended_exc_detail *excdet) +{ + struct gru_control_block_extended *cbe; + + cbe = get_cbe(GRUBASE(cb), get_cb_number(cb)); + excdet->opc = cbe->opccpy; + excdet->exopc = cbe->exopccpy; + excdet->ecause = cbe->ecause; + excdet->exceptdet0 = cbe->idef1upd; + excdet->exceptdet1 = cbe->idef3upd; + return 0; +} + +char *gru_get_cb_exception_detail_str(int ret, void *cb, + char *buf, int size) +{ + struct gru_control_block_status *gen = (void *)cb; + struct control_block_extended_exc_detail excdet; + + if (ret > 0 && gen->istatus == CBS_EXCEPTION) { + gru_get_cb_exception_detail(cb, &excdet); + snprintf(buf, size, + "GRU exception: cb %p, opc %d, exopc %d, ecause 0x%x," + "excdet0 0x%lx, excdet1 0x%x", + gen, excdet.opc, excdet.exopc, excdet.ecause, + excdet.exceptdet0, excdet.exceptdet1); + } else { + snprintf(buf, size, "No exception"); + } + return buf; +} + +static int gru_wait_idle_or_exception(struct gru_control_block_status *gen) +{ + while (gen->istatus >= CBS_ACTIVE) { + cpu_relax(); + barrier(); + } + return gen->istatus; +} + +static int gru_retry_exception(void *cb) +{ + struct gru_control_block_status *gen = (void *)cb; + struct control_block_extended_exc_detail excdet; + int retry = EXCEPTION_RETRY_LIMIT; + + while (1) { + if (gru_get_cb_message_queue_substatus(cb)) + break; + if (gru_wait_idle_or_exception(gen) == CBS_IDLE) + return CBS_IDLE; + + gru_get_cb_exception_detail(cb, &excdet); + if (excdet.ecause & ~EXCEPTION_RETRY_BITS) + break; + if (retry-- == 0) + break; + gen->icmd = 1; + gru_flush_cache(gen); + } + return CBS_EXCEPTION; +} + +int gru_check_status_proc(void *cb) +{ + struct gru_control_block_status *gen = (void *)cb; + int ret; + + ret = gen->istatus; + if (ret != CBS_EXCEPTION) + return ret; + return gru_retry_exception(cb); + +} + +int gru_wait_proc(void *cb) +{ + struct gru_control_block_status *gen = (void *)cb; + int ret; + + ret = gru_wait_idle_or_exception(gen); + if (ret == CBS_EXCEPTION) + ret = gru_retry_exception(cb); + + return ret; +} + +void gru_abort(int ret, void *cb, char *str) +{ + char buf[GRU_EXC_STR_SIZE]; + + panic("GRU FATAL ERROR: %s - %s\n", str, + gru_get_cb_exception_detail_str(ret, cb, buf, sizeof(buf))); +} + +void gru_wait_abort_proc(void *cb) +{ + int ret; + + ret = gru_wait_proc(cb); + if (ret) + gru_abort(ret, cb, "gru_wait_abort"); +} + + +/*------------------------------ MESSAGE QUEUES -----------------------------*/ + +/* Internal status . These are NOT returned to the user. */ +#define MQIE_AGAIN -1 /* try again */ + + +/* + * Save/restore the "present" flag that is in the second line of 2-line + * messages + */ +static inline int get_present2(void *p) +{ + struct message_header *mhdr = p + GRU_CACHE_LINE_BYTES; + return mhdr->present; +} + +static inline void restore_present2(void *p, int val) +{ + struct message_header *mhdr = p + GRU_CACHE_LINE_BYTES; + mhdr->present = val; +} + +/* + * Create a message queue. + * qlines - message queue size in cache lines. Includes 2-line header. + */ +int gru_create_message_queue(void *p, unsigned int bytes) +{ + struct message_queue *mq = p; + unsigned int qlines; + + qlines = bytes / GRU_CACHE_LINE_BYTES - 2; + memset(mq, 0, bytes); + mq->start = &mq->data; + mq->start2 = &mq->data + (qlines / 2 - 1) * GRU_CACHE_LINE_BYTES; + mq->next = &mq->data; + mq->limit = &mq->data + (qlines - 2) * GRU_CACHE_LINE_BYTES; + mq->qlines = qlines; + mq->hstatus[0] = 0; + mq->hstatus[1] = 1; + mq->head = gru_mesq_head(2, qlines / 2 + 1); + return 0; +} +EXPORT_SYMBOL_GPL(gru_create_message_queue); + +/* + * Send a NOOP message to a message queue + * Returns: + * 0 - if queue is full after the send. This is the normal case + * but various races can change this. + * -1 - if mesq sent successfully but queue not full + * >0 - unexpected error. MQE_xxx returned + */ +static int send_noop_message(void *cb, + unsigned long mq, void *mesg) +{ + const struct message_header noop_header = { + .present = MQS_NOOP, .lines = 1}; + unsigned long m; + int substatus, ret; + struct message_header save_mhdr, *mhdr = mesg; + + STAT(mesq_noop); + save_mhdr = *mhdr; + *mhdr = noop_header; + gru_mesq(cb, mq, gru_get_tri(mhdr), 1, IMA); + ret = gru_wait(cb); + + if (ret) { + substatus = gru_get_cb_message_queue_substatus(cb); + switch (substatus) { + case CBSS_NO_ERROR: + STAT(mesq_noop_unexpected_error); + ret = MQE_UNEXPECTED_CB_ERR; + break; + case CBSS_LB_OVERFLOWED: + STAT(mesq_noop_lb_overflow); + ret = MQE_CONGESTION; + break; + case CBSS_QLIMIT_REACHED: + STAT(mesq_noop_qlimit_reached); + ret = 0; + break; + case CBSS_AMO_NACKED: + STAT(mesq_noop_amo_nacked); + ret = MQE_CONGESTION; + break; + case CBSS_PUT_NACKED: + STAT(mesq_noop_put_nacked); + m = mq + (gru_get_amo_value_head(cb) << 6); + gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, 1, 1, + IMA); + if (gru_wait(cb) == CBS_IDLE) + ret = MQIE_AGAIN; + else + ret = MQE_UNEXPECTED_CB_ERR; + break; + case CBSS_PAGE_OVERFLOW: + default: + BUG(); + } + } + *mhdr = save_mhdr; + return ret; +} + +/* + * Handle a gru_mesq full. + */ +static int send_message_queue_full(void *cb, + unsigned long mq, void *mesg, int lines) +{ + union gru_mesqhead mqh; + unsigned int limit, head; + unsigned long avalue; + int half, qlines, save; + + /* Determine if switching to first/second half of q */ + avalue = gru_get_amo_value(cb); + head = gru_get_amo_value_head(cb); + limit = gru_get_amo_value_limit(cb); + + /* + * Fetch "qlines" from the queue header. Since the queue may be + * in memory that can't be accessed using socket addresses, use + * the GRU to access the data. Use DSR space from the message. + */ + save = *(int *)mesg; + gru_vload(cb, QLINES(mq), gru_get_tri(mesg), XTYPE_W, 1, 1, IMA); + if (gru_wait(cb) != CBS_IDLE) + goto cberr; + qlines = *(int *)mesg; + *(int *)mesg = save; + half = (limit != qlines); + + if (half) + mqh = gru_mesq_head(qlines / 2 + 1, qlines); + else + mqh = gru_mesq_head(2, qlines / 2 + 1); + + /* Try to get lock for switching head pointer */ + gru_gamir(cb, EOP_IR_CLR, HSTATUS(mq, half), XTYPE_DW, IMA); + if (gru_wait(cb) != CBS_IDLE) + goto cberr; + if (!gru_get_amo_value(cb)) { + STAT(mesq_qf_locked); + return MQE_QUEUE_FULL; + } + + /* Got the lock. Send optional NOP if queue not full, */ + if (head != limit) { + if (send_noop_message(cb, mq, mesg)) { + gru_gamir(cb, EOP_IR_INC, HSTATUS(mq, half), + XTYPE_DW, IMA); + if (gru_wait(cb) != CBS_IDLE) + goto cberr; + STAT(mesq_qf_noop_not_full); + return MQIE_AGAIN; + } + avalue++; + } + + /* Then flip queuehead to other half of queue. */ + gru_gamer(cb, EOP_ERR_CSWAP, mq, XTYPE_DW, mqh.val, avalue, IMA); + if (gru_wait(cb) != CBS_IDLE) + goto cberr; + + /* If not successfully in swapping queue head, clear the hstatus lock */ + if (gru_get_amo_value(cb) != avalue) { + STAT(mesq_qf_switch_head_failed); + gru_gamir(cb, EOP_IR_INC, HSTATUS(mq, half), XTYPE_DW, IMA); + if (gru_wait(cb) != CBS_IDLE) + goto cberr; + } + return MQIE_AGAIN; +cberr: + STAT(mesq_qf_unexpected_error); + return MQE_UNEXPECTED_CB_ERR; +} + + +/* + * Handle a gru_mesq failure. Some of these failures are software recoverable + * or retryable. + */ +static int send_message_failure(void *cb, + unsigned long mq, + void *mesg, + int lines) +{ + int substatus, ret = 0; + unsigned long m; + + substatus = gru_get_cb_message_queue_substatus(cb); + switch (substatus) { + case CBSS_NO_ERROR: + STAT(mesq_send_unexpected_error); + ret = MQE_UNEXPECTED_CB_ERR; + break; + case CBSS_LB_OVERFLOWED: + STAT(mesq_send_lb_overflow); + ret = MQE_CONGESTION; + break; + case CBSS_QLIMIT_REACHED: + STAT(mesq_send_qlimit_reached); + ret = send_message_queue_full(cb, mq, mesg, lines); + break; + case CBSS_AMO_NACKED: + STAT(mesq_send_amo_nacked); + ret = MQE_CONGESTION; + break; + case CBSS_PUT_NACKED: + STAT(mesq_send_put_nacked); + m =mq + (gru_get_amo_value_head(cb) << 6); + gru_vstore(cb, m, gru_get_tri(mesg), XTYPE_CL, lines, 1, IMA); + if (gru_wait(cb) == CBS_IDLE) + ret = MQE_OK; + else + ret = MQE_UNEXPECTED_CB_ERR; + break; + default: + BUG(); + } + return ret; +} + +/* + * Send a message to a message queue + * cb GRU control block to use to send message + * mq message queue + * mesg message. ust be vaddr within a GSEG + * bytes message size (<= 2 CL) + */ +int gru_send_message_gpa(unsigned long mq, void *mesg, unsigned int bytes) +{ + struct message_header *mhdr; + void *cb; + void *dsr; + int istatus, clines, ret; + + STAT(mesq_send); + BUG_ON(bytes < sizeof(int) || bytes > 2 * GRU_CACHE_LINE_BYTES); + + clines = (bytes + GRU_CACHE_LINE_BYTES - 1) / GRU_CACHE_LINE_BYTES; + if (gru_get_cpu_resources(bytes, &cb, &dsr)) + return MQE_BUG_NO_RESOURCES; + memcpy(dsr, mesg, bytes); + mhdr = dsr; + mhdr->present = MQS_FULL; + mhdr->lines = clines; + if (clines == 2) { + mhdr->present2 = get_present2(mhdr); + restore_present2(mhdr, MQS_FULL); + } + + do { + ret = MQE_OK; + gru_mesq(cb, mq, gru_get_tri(mhdr), clines, IMA); + istatus = gru_wait(cb); + if (istatus != CBS_IDLE) + ret = send_message_failure(cb, mq, dsr, clines); + } while (ret == MQIE_AGAIN); + gru_free_cpu_resources(cb, dsr); + + if (ret) + STAT(mesq_send_failed); + return ret; +} +EXPORT_SYMBOL_GPL(gru_send_message_gpa); + +/* + * Advance the receive pointer for the queue to the next message. + */ +void gru_free_message(void *rmq, void *mesg) +{ + struct message_queue *mq = rmq; + struct message_header *mhdr = mq->next; + void *next, *pnext; + int half = -1; + int lines = mhdr->lines; + + if (lines == 2) + restore_present2(mhdr, MQS_EMPTY); + mhdr->present = MQS_EMPTY; + + pnext = mq->next; + next = pnext + GRU_CACHE_LINE_BYTES * lines; + if (next == mq->limit) { + next = mq->start; + half = 1; + } else if (pnext < mq->start2 && next >= mq->start2) { + half = 0; + } + + if (half >= 0) + mq->hstatus[half] = 1; + mq->next = next; +} +EXPORT_SYMBOL_GPL(gru_free_message); + +/* + * Get next message from message queue. Return NULL if no message + * present. User must call next_message() to move to next message. + * rmq message queue + */ +void *gru_get_next_message(void *rmq) +{ + struct message_queue *mq = rmq; + struct message_header *mhdr = mq->next; + int present = mhdr->present; + + /* skip NOOP messages */ + STAT(mesq_receive); + while (present == MQS_NOOP) { + gru_free_message(rmq, mhdr); + mhdr = mq->next; + present = mhdr->present; + } + + /* Wait for both halves of 2 line messages */ + if (present == MQS_FULL && mhdr->lines == 2 && + get_present2(mhdr) == MQS_EMPTY) + present = MQS_EMPTY; + + if (!present) { + STAT(mesq_receive_none); + return NULL; + } + + if (mhdr->lines == 2) + restore_present2(mhdr, mhdr->present2); + + return mhdr; +} +EXPORT_SYMBOL_GPL(gru_get_next_message); + +/* ---------------------- GRU DATA COPY FUNCTIONS ---------------------------*/ + +/* + * Copy a block of data using the GRU resources + */ +int gru_copy_gpa(unsigned long dest_gpa, unsigned long src_gpa, + unsigned int bytes) +{ + void *cb; + void *dsr; + int ret; + + STAT(copy_gpa); + if (gru_get_cpu_resources(GRU_NUM_KERNEL_DSR_BYTES, &cb, &dsr)) + return MQE_BUG_NO_RESOURCES; + gru_bcopy(cb, src_gpa, dest_gpa, gru_get_tri(dsr), + XTYPE_B, bytes, GRU_NUM_KERNEL_DSR_BYTES, IMA); + ret = gru_wait(cb); + gru_free_cpu_resources(cb, dsr); + return ret; +} +EXPORT_SYMBOL_GPL(gru_copy_gpa); + +/* ------------------- KERNEL QUICKTESTS RUN AT STARTUP ----------------*/ +/* Temp - will delete after we gain confidence in the GRU */ +static __cacheline_aligned unsigned long word0; +static __cacheline_aligned unsigned long word1; + +static int quicktest(struct gru_state *gru) +{ + void *cb; + void *ds; + unsigned long *p; + + cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0); + ds = get_gseg_base_address_ds(gru->gs_gru_base_vaddr, KERNEL_CTXNUM, 0); + p = ds; + word0 = MAGIC; + + gru_vload(cb, uv_gpa(&word0), 0, XTYPE_DW, 1, 1, IMA); + if (gru_wait(cb) != CBS_IDLE) + BUG(); + + if (*(unsigned long *)ds != MAGIC) + BUG(); + gru_vstore(cb, uv_gpa(&word1), 0, XTYPE_DW, 1, 1, IMA); + if (gru_wait(cb) != CBS_IDLE) + BUG(); + + if (word0 != word1 || word0 != MAGIC) { + printk + ("GRU quicktest err: gru %d, found 0x%lx, expected 0x%lx\n", + gru->gs_gid, word1, MAGIC); + BUG(); /* ZZZ should not be fatal */ + } + + return 0; +} + + +int gru_kservices_init(struct gru_state *gru) +{ + struct gru_blade_state *bs; + struct gru_context_configuration_handle *cch; + unsigned long cbr_map, dsr_map; + int err, num, cpus_possible; + + /* + * Currently, resources are reserved ONLY on the second chiplet + * on each blade. This leaves ALL resources on chiplet 0 available + * for user code. + */ + bs = gru->gs_blade; + if (gru != &bs->bs_grus[1]) + return 0; + + cpus_possible = uv_blade_nr_possible_cpus(gru->gs_blade_id); + + num = GRU_NUM_KERNEL_CBR * cpus_possible; + cbr_map = reserve_gru_cb_resources(gru, GRU_CB_COUNT_TO_AU(num), NULL); + gru->gs_reserved_cbrs += num; + + num = GRU_NUM_KERNEL_DSR_BYTES * cpus_possible; + dsr_map = reserve_gru_ds_resources(gru, GRU_DS_BYTES_TO_AU(num), NULL); + gru->gs_reserved_dsr_bytes += num; + + gru->gs_active_contexts++; + __set_bit(KERNEL_CTXNUM, &gru->gs_context_map); + cch = get_cch(gru->gs_gru_base_vaddr, KERNEL_CTXNUM); + + bs->kernel_cb = get_gseg_base_address_cb(gru->gs_gru_base_vaddr, + KERNEL_CTXNUM, 0); + bs->kernel_dsr = get_gseg_base_address_ds(gru->gs_gru_base_vaddr, + KERNEL_CTXNUM, 0); + + lock_cch_handle(cch); + cch->tfm_fault_bit_enable = 0; + cch->tlb_int_enable = 0; + cch->tfm_done_bit_enable = 0; + cch->unmap_enable = 1; + err = cch_allocate(cch, 0, cbr_map, dsr_map); + if (err) { + gru_dbg(grudev, + "Unable to allocate kernel CCH: gru %d, err %d\n", + gru->gs_gid, err); + BUG(); + } + if (cch_start(cch)) { + gru_dbg(grudev, "Unable to start kernel CCH: gru %d, err %d\n", + gru->gs_gid, err); + BUG(); + } + unlock_cch_handle(cch); + + if (options & GRU_QUICKLOOK) + quicktest(gru); + return 0; +} -- GitLab From 9a0deecc90de62c91d7107611446c0c950091851 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:33:58 -0700 Subject: [PATCH 0382/1024] GRU Driver: resource management This file contains functions realted to managing GRU resources provided to the user. Examples include GRU context assignment, load, unload, migration, etc.. Signed-off-by: Jack Steiner Cc: Nick Piggin Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/grumain.c | 798 +++++++++++++++++++++++++++++++++ 1 file changed, 798 insertions(+) create mode 100644 drivers/misc/sgi-gru/grumain.c diff --git a/drivers/misc/sgi-gru/grumain.c b/drivers/misc/sgi-gru/grumain.c new file mode 100644 index 00000000000..aef6822cb80 --- /dev/null +++ b/drivers/misc/sgi-gru/grumain.c @@ -0,0 +1,798 @@ +/* + * SN Platform GRU Driver + * + * DRIVER TABLE MANAGER + GRU CONTEXT LOAD/UNLOAD + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "gru.h" +#include "grutables.h" +#include "gruhandles.h" + +unsigned long options __read_mostly; + +static struct device_driver gru_driver = { + .name = "gru" +}; + +static struct device gru_device = { + .bus_id = {0}, + .driver = &gru_driver, +}; + +struct device *grudev = &gru_device; + +/* + * Select a gru fault map to be used by the current cpu. Note that + * multiple cpus may be using the same map. + * ZZZ should "shift" be used?? Depends on HT cpu numbering + * ZZZ should be inline but did not work on emulator + */ +int gru_cpu_fault_map_id(void) +{ + return uv_blade_processor_id() % GRU_NUM_TFM; +} + +/*--------- ASID Management ------------------------------------------- + * + * Initially, assign asids sequentially from MIN_ASID .. MAX_ASID. + * Once MAX is reached, flush the TLB & start over. However, + * some asids may still be in use. There won't be many (percentage wise) still + * in use. Search active contexts & determine the value of the first + * asid in use ("x"s below). Set "limit" to this value. + * This defines a block of assignable asids. + * + * When "limit" is reached, search forward from limit+1 and determine the + * next block of assignable asids. + * + * Repeat until MAX_ASID is reached, then start over again. + * + * Each time MAX_ASID is reached, increment the asid generation. Since + * the search for in-use asids only checks contexts with GRUs currently + * assigned, asids in some contexts will be missed. Prior to loading + * a context, the asid generation of the GTS asid is rechecked. If it + * doesn't match the current generation, a new asid will be assigned. + * + * 0---------------x------------x---------------------x----| + * ^-next ^-limit ^-MAX_ASID + * + * All asid manipulation & context loading/unloading is protected by the + * gs_lock. + */ + +/* Hit the asid limit. Start over */ +static int gru_wrap_asid(struct gru_state *gru) +{ + gru_dbg(grudev, "gru %p\n", gru); + STAT(asid_wrap); + gru->gs_asid_gen++; + gru_flush_all_tlb(gru); + return MIN_ASID; +} + +/* Find the next chunk of unused asids */ +static int gru_reset_asid_limit(struct gru_state *gru, int asid) +{ + int i, gid, inuse_asid, limit; + + gru_dbg(grudev, "gru %p, asid 0x%x\n", gru, asid); + STAT(asid_next); + limit = MAX_ASID; + if (asid >= limit) + asid = gru_wrap_asid(gru); + gid = gru->gs_gid; +again: + for (i = 0; i < GRU_NUM_CCH; i++) { + if (!gru->gs_gts[i]) + continue; + inuse_asid = gru->gs_gts[i]->ts_gms->ms_asids[gid].mt_asid; + gru_dbg(grudev, "gru %p, inuse_asid 0x%x, cxtnum %d, gts %p\n", + gru, inuse_asid, i, gru->gs_gts[i]); + if (inuse_asid == asid) { + asid += ASID_INC; + if (asid >= limit) { + /* + * empty range: reset the range limit and + * start over + */ + limit = MAX_ASID; + if (asid >= MAX_ASID) + asid = gru_wrap_asid(gru); + goto again; + } + } + + if ((inuse_asid > asid) && (inuse_asid < limit)) + limit = inuse_asid; + } + gru->gs_asid_limit = limit; + gru->gs_asid = asid; + gru_dbg(grudev, "gru %p, new asid 0x%x, new_limit 0x%x\n", gru, asid, + limit); + return asid; +} + +/* Assign a new ASID to a thread context. */ +static int gru_assign_asid(struct gru_state *gru) +{ + int asid; + + spin_lock(&gru->gs_asid_lock); + gru->gs_asid += ASID_INC; + asid = gru->gs_asid; + if (asid >= gru->gs_asid_limit) + asid = gru_reset_asid_limit(gru, asid); + spin_unlock(&gru->gs_asid_lock); + + gru_dbg(grudev, "gru %p, asid 0x%x\n", gru, asid); + return asid; +} + +/* + * Clear n bits in a word. Return a word indicating the bits that were cleared. + * Optionally, build an array of chars that contain the bit numbers allocated. + */ +static unsigned long reserve_resources(unsigned long *p, int n, int mmax, + char *idx) +{ + unsigned long bits = 0; + int i; + + do { + i = find_first_bit(p, mmax); + if (i == mmax) + BUG(); + __clear_bit(i, p); + __set_bit(i, &bits); + if (idx) + *idx++ = i; + } while (--n); + return bits; +} + +unsigned long reserve_gru_cb_resources(struct gru_state *gru, int cbr_au_count, + char *cbmap) +{ + return reserve_resources(&gru->gs_cbr_map, cbr_au_count, GRU_CBR_AU, + cbmap); +} + +unsigned long reserve_gru_ds_resources(struct gru_state *gru, int dsr_au_count, + char *dsmap) +{ + return reserve_resources(&gru->gs_dsr_map, dsr_au_count, GRU_DSR_AU, + dsmap); +} + +static void reserve_gru_resources(struct gru_state *gru, + struct gru_thread_state *gts) +{ + gru->gs_active_contexts++; + gts->ts_cbr_map = + reserve_gru_cb_resources(gru, gts->ts_cbr_au_count, + gts->ts_cbr_idx); + gts->ts_dsr_map = + reserve_gru_ds_resources(gru, gts->ts_dsr_au_count, NULL); +} + +static void free_gru_resources(struct gru_state *gru, + struct gru_thread_state *gts) +{ + gru->gs_active_contexts--; + gru->gs_cbr_map |= gts->ts_cbr_map; + gru->gs_dsr_map |= gts->ts_dsr_map; +} + +/* + * Check if a GRU has sufficient free resources to satisfy an allocation + * request. Note: GRU locks may or may not be held when this is called. If + * not held, recheck after acquiring the appropriate locks. + * + * Returns 1 if sufficient resources, 0 if not + */ +static int check_gru_resources(struct gru_state *gru, int cbr_au_count, + int dsr_au_count, int max_active_contexts) +{ + return hweight64(gru->gs_cbr_map) >= cbr_au_count + && hweight64(gru->gs_dsr_map) >= dsr_au_count + && gru->gs_active_contexts < max_active_contexts; +} + +/* + * TLB manangment requires tracking all GRU chiplets that have loaded a GSEG + * context. + */ +static int gru_load_mm_tracker(struct gru_state *gru, struct gru_mm_struct *gms, + int ctxnum) +{ + struct gru_mm_tracker *asids = &gms->ms_asids[gru->gs_gid]; + unsigned short ctxbitmap = (1 << ctxnum); + int asid; + + spin_lock(&gms->ms_asid_lock); + asid = asids->mt_asid; + + if (asid == 0 || asids->mt_asid_gen != gru->gs_asid_gen) { + asid = gru_assign_asid(gru); + asids->mt_asid = asid; + asids->mt_asid_gen = gru->gs_asid_gen; + STAT(asid_new); + } else { + STAT(asid_reuse); + } + + BUG_ON(asids->mt_ctxbitmap & ctxbitmap); + asids->mt_ctxbitmap |= ctxbitmap; + if (!test_bit(gru->gs_gid, gms->ms_asidmap)) + __set_bit(gru->gs_gid, gms->ms_asidmap); + spin_unlock(&gms->ms_asid_lock); + + gru_dbg(grudev, + "gru %x, gms %p, ctxnum 0x%d, asid 0x%x, asidmap 0x%lx\n", + gru->gs_gid, gms, ctxnum, asid, gms->ms_asidmap[0]); + return asid; +} + +static void gru_unload_mm_tracker(struct gru_state *gru, + struct gru_mm_struct *gms, int ctxnum) +{ + struct gru_mm_tracker *asids; + unsigned short ctxbitmap; + + asids = &gms->ms_asids[gru->gs_gid]; + ctxbitmap = (1 << ctxnum); + spin_lock(&gms->ms_asid_lock); + BUG_ON((asids->mt_ctxbitmap & ctxbitmap) != ctxbitmap); + asids->mt_ctxbitmap ^= ctxbitmap; + gru_dbg(grudev, "gru %x, gms %p, ctxnum 0x%d, asidmap 0x%lx\n", + gru->gs_gid, gms, ctxnum, gms->ms_asidmap[0]); + spin_unlock(&gms->ms_asid_lock); +} + +/* + * Decrement the reference count on a GTS structure. Free the structure + * if the reference count goes to zero. + */ +void gts_drop(struct gru_thread_state *gts) +{ + if (gts && atomic_dec_return(>s->ts_refcnt) == 0) { + gru_drop_mmu_notifier(gts->ts_gms); + kfree(gts); + STAT(gts_free); + } +} + +/* + * Locate the GTS structure for the current thread. + */ +static struct gru_thread_state *gru_find_current_gts_nolock(struct gru_vma_data + *vdata, int tsid) +{ + struct gru_thread_state *gts; + + list_for_each_entry(gts, &vdata->vd_head, ts_next) + if (gts->ts_tsid == tsid) + return gts; + return NULL; +} + +/* + * Allocate a thread state structure. + */ +static struct gru_thread_state *gru_alloc_gts(struct vm_area_struct *vma, + struct gru_vma_data *vdata, + int tsid) +{ + struct gru_thread_state *gts; + int bytes; + + bytes = DSR_BYTES(vdata->vd_dsr_au_count) + + CBR_BYTES(vdata->vd_cbr_au_count); + bytes += sizeof(struct gru_thread_state); + gts = kzalloc(bytes, GFP_KERNEL); + if (!gts) + return NULL; + + STAT(gts_alloc); + atomic_set(>s->ts_refcnt, 1); + mutex_init(>s->ts_ctxlock); + gts->ts_cbr_au_count = vdata->vd_cbr_au_count; + gts->ts_dsr_au_count = vdata->vd_dsr_au_count; + gts->ts_user_options = vdata->vd_user_options; + gts->ts_tsid = tsid; + gts->ts_user_options = vdata->vd_user_options; + gts->ts_ctxnum = NULLCTX; + gts->ts_mm = current->mm; + gts->ts_vma = vma; + gts->ts_tlb_int_select = -1; + gts->ts_gms = gru_register_mmu_notifier(); + if (!gts->ts_gms) + goto err; + + gru_dbg(grudev, "alloc vdata %p, new gts %p\n", vdata, gts); + return gts; + +err: + gts_drop(gts); + return NULL; +} + +/* + * Allocate a vma private data structure. + */ +struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma, int tsid) +{ + struct gru_vma_data *vdata = NULL; + + vdata = kmalloc(sizeof(*vdata), GFP_KERNEL); + if (!vdata) + return NULL; + + INIT_LIST_HEAD(&vdata->vd_head); + spin_lock_init(&vdata->vd_lock); + gru_dbg(grudev, "alloc vdata %p\n", vdata); + return vdata; +} + +/* + * Find the thread state structure for the current thread. + */ +struct gru_thread_state *gru_find_thread_state(struct vm_area_struct *vma, + int tsid) +{ + struct gru_vma_data *vdata = vma->vm_private_data; + struct gru_thread_state *gts; + + spin_lock(&vdata->vd_lock); + gts = gru_find_current_gts_nolock(vdata, tsid); + spin_unlock(&vdata->vd_lock); + gru_dbg(grudev, "vma %p, gts %p\n", vma, gts); + return gts; +} + +/* + * Allocate a new thread state for a GSEG. Note that races may allow + * another thread to race to create a gts. + */ +struct gru_thread_state *gru_alloc_thread_state(struct vm_area_struct *vma, + int tsid) +{ + struct gru_vma_data *vdata = vma->vm_private_data; + struct gru_thread_state *gts, *ngts; + + gts = gru_alloc_gts(vma, vdata, tsid); + if (!gts) + return NULL; + + spin_lock(&vdata->vd_lock); + ngts = gru_find_current_gts_nolock(vdata, tsid); + if (ngts) { + gts_drop(gts); + gts = ngts; + STAT(gts_double_allocate); + } else { + list_add(>s->ts_next, &vdata->vd_head); + } + spin_unlock(&vdata->vd_lock); + gru_dbg(grudev, "vma %p, gts %p\n", vma, gts); + return gts; +} + +/* + * Free the GRU context assigned to the thread state. + */ +static void gru_free_gru_context(struct gru_thread_state *gts) +{ + struct gru_state *gru; + + gru = gts->ts_gru; + gru_dbg(grudev, "gts %p, gru %p\n", gts, gru); + + spin_lock(&gru->gs_lock); + gru->gs_gts[gts->ts_ctxnum] = NULL; + free_gru_resources(gru, gts); + BUG_ON(test_bit(gts->ts_ctxnum, &gru->gs_context_map) == 0); + __clear_bit(gts->ts_ctxnum, &gru->gs_context_map); + gts->ts_ctxnum = NULLCTX; + gts->ts_gru = NULL; + spin_unlock(&gru->gs_lock); + + gts_drop(gts); + STAT(free_context); +} + +/* + * Prefetching cachelines help hardware performance. + */ +static void prefetch_data(void *p, int num, int stride) +{ + while (num-- > 0) { + prefetchw(p); + p += stride; + } +} + +static inline long gru_copy_handle(void *d, void *s) +{ + memcpy(d, s, GRU_HANDLE_BYTES); + return GRU_HANDLE_BYTES; +} + +/* rewrite in assembly & use lots of prefetch */ +static void gru_load_context_data(void *save, void *grubase, int ctxnum, + unsigned long cbrmap, unsigned long dsrmap) +{ + void *gseg, *cb, *cbe; + unsigned long length; + int i, scr; + + gseg = grubase + ctxnum * GRU_GSEG_STRIDE; + length = hweight64(dsrmap) * GRU_DSR_AU_BYTES; + prefetch_data(gseg + GRU_DS_BASE, length / GRU_CACHE_LINE_BYTES, + GRU_CACHE_LINE_BYTES); + + cb = gseg + GRU_CB_BASE; + cbe = grubase + GRU_CBE_BASE; + for_each_cbr_in_allocation_map(i, &cbrmap, scr) { + prefetch_data(cb, 1, GRU_CACHE_LINE_BYTES); + prefetch_data(cbe + i * GRU_HANDLE_STRIDE, 1, + GRU_CACHE_LINE_BYTES); + cb += GRU_HANDLE_STRIDE; + } + + cb = gseg + GRU_CB_BASE; + for_each_cbr_in_allocation_map(i, &cbrmap, scr) { + save += gru_copy_handle(cb, save); + save += gru_copy_handle(cbe + i * GRU_HANDLE_STRIDE, save); + cb += GRU_HANDLE_STRIDE; + } + + memcpy(gseg + GRU_DS_BASE, save, length); +} + +static void gru_unload_context_data(void *save, void *grubase, int ctxnum, + unsigned long cbrmap, unsigned long dsrmap) +{ + void *gseg, *cb, *cbe; + unsigned long length; + int i, scr; + + gseg = grubase + ctxnum * GRU_GSEG_STRIDE; + + cb = gseg + GRU_CB_BASE; + cbe = grubase + GRU_CBE_BASE; + for_each_cbr_in_allocation_map(i, &cbrmap, scr) { + save += gru_copy_handle(save, cb); + save += gru_copy_handle(save, cbe + i * GRU_HANDLE_STRIDE); + cb += GRU_HANDLE_STRIDE; + } + length = hweight64(dsrmap) * GRU_DSR_AU_BYTES; + memcpy(save, gseg + GRU_DS_BASE, length); +} + +void gru_unload_context(struct gru_thread_state *gts, int savestate) +{ + struct gru_state *gru = gts->ts_gru; + struct gru_context_configuration_handle *cch; + int ctxnum = gts->ts_ctxnum; + + zap_vma_ptes(gts->ts_vma, UGRUADDR(gts), GRU_GSEG_PAGESIZE); + cch = get_cch(gru->gs_gru_base_vaddr, ctxnum); + + lock_cch_handle(cch); + if (cch_interrupt_sync(cch)) + BUG(); + gru_dbg(grudev, "gts %p\n", gts); + + gru_unload_mm_tracker(gru, gts->ts_gms, gts->ts_ctxnum); + if (savestate) + gru_unload_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr, + ctxnum, gts->ts_cbr_map, + gts->ts_dsr_map); + + if (cch_deallocate(cch)) + BUG(); + gts->ts_force_unload = 0; /* ts_force_unload locked by CCH lock */ + unlock_cch_handle(cch); + + gru_free_gru_context(gts); + STAT(unload_context); +} + +/* + * Load a GRU context by copying it from the thread data structure in memory + * to the GRU. + */ +static void gru_load_context(struct gru_thread_state *gts) +{ + struct gru_state *gru = gts->ts_gru; + struct gru_context_configuration_handle *cch; + int err, asid, ctxnum = gts->ts_ctxnum; + + gru_dbg(grudev, "gts %p\n", gts); + cch = get_cch(gru->gs_gru_base_vaddr, ctxnum); + + lock_cch_handle(cch); + asid = gru_load_mm_tracker(gru, gts->ts_gms, gts->ts_ctxnum); + cch->tfm_fault_bit_enable = + (gts->ts_user_options == GRU_OPT_MISS_FMM_POLL + || gts->ts_user_options == GRU_OPT_MISS_FMM_INTR); + cch->tlb_int_enable = (gts->ts_user_options == GRU_OPT_MISS_FMM_INTR); + if (cch->tlb_int_enable) { + gts->ts_tlb_int_select = gru_cpu_fault_map_id(); + cch->tlb_int_select = gts->ts_tlb_int_select; + } + cch->tfm_done_bit_enable = 0; + err = cch_allocate(cch, asid, gts->ts_cbr_map, gts->ts_dsr_map); + if (err) { + gru_dbg(grudev, + "err %d: cch %p, gts %p, cbr 0x%lx, dsr 0x%lx\n", + err, cch, gts, gts->ts_cbr_map, gts->ts_dsr_map); + BUG(); + } + + gru_load_context_data(gts->ts_gdata, gru->gs_gru_base_vaddr, ctxnum, + gts->ts_cbr_map, gts->ts_dsr_map); + + if (cch_start(cch)) + BUG(); + unlock_cch_handle(cch); + + STAT(load_context); +} + +/* + * Update fields in an active CCH: + * - retarget interrupts on local blade + * - force a delayed context unload by clearing the CCH asids. This + * forces TLB misses for new GRU instructions. The context is unloaded + * when the next TLB miss occurs. + */ +static int gru_update_cch(struct gru_thread_state *gts, int int_select) +{ + struct gru_context_configuration_handle *cch; + struct gru_state *gru = gts->ts_gru; + int i, ctxnum = gts->ts_ctxnum, ret = 0; + + cch = get_cch(gru->gs_gru_base_vaddr, ctxnum); + + lock_cch_handle(cch); + if (cch->state == CCHSTATE_ACTIVE) { + if (gru->gs_gts[gts->ts_ctxnum] != gts) + goto exit; + if (cch_interrupt(cch)) + BUG(); + if (int_select >= 0) { + gts->ts_tlb_int_select = int_select; + cch->tlb_int_select = int_select; + } else { + for (i = 0; i < 8; i++) + cch->asid[i] = 0; + cch->tfm_fault_bit_enable = 0; + cch->tlb_int_enable = 0; + gts->ts_force_unload = 1; + } + if (cch_start(cch)) + BUG(); + ret = 1; + } +exit: + unlock_cch_handle(cch); + return ret; +} + +/* + * Update CCH tlb interrupt select. Required when all the following is true: + * - task's GRU context is loaded into a GRU + * - task is using interrupt notification for TLB faults + * - task has migrated to a different cpu on the same blade where + * it was previously running. + */ +static int gru_retarget_intr(struct gru_thread_state *gts) +{ + if (gts->ts_tlb_int_select < 0 + || gts->ts_tlb_int_select == gru_cpu_fault_map_id()) + return 0; + + gru_dbg(grudev, "retarget from %d to %d\n", gts->ts_tlb_int_select, + gru_cpu_fault_map_id()); + return gru_update_cch(gts, gru_cpu_fault_map_id()); +} + + +/* + * Insufficient GRU resources available on the local blade. Steal a context from + * a process. This is a hack until a _real_ resource scheduler is written.... + */ +#define next_ctxnum(n) ((n) < GRU_NUM_CCH - 2 ? (n) + 1 : 0) +#define next_gru(b, g) (((g) < &(b)->bs_grus[GRU_CHIPLETS_PER_BLADE - 1]) ? \ + ((g)+1) : &(b)->bs_grus[0]) + +static void gru_steal_context(struct gru_thread_state *gts) +{ + struct gru_blade_state *blade; + struct gru_state *gru, *gru0; + struct gru_thread_state *ngts = NULL; + int ctxnum, ctxnum0, flag = 0, cbr, dsr; + + cbr = gts->ts_cbr_au_count; + dsr = gts->ts_dsr_au_count; + + preempt_disable(); + blade = gru_base[uv_numa_blade_id()]; + spin_lock(&blade->bs_lock); + + ctxnum = next_ctxnum(blade->bs_lru_ctxnum); + gru = blade->bs_lru_gru; + if (ctxnum == 0) + gru = next_gru(blade, gru); + ctxnum0 = ctxnum; + gru0 = gru; + while (1) { + if (check_gru_resources(gru, cbr, dsr, GRU_NUM_CCH)) + break; + spin_lock(&gru->gs_lock); + for (; ctxnum < GRU_NUM_CCH; ctxnum++) { + if (flag && gru == gru0 && ctxnum == ctxnum0) + break; + ngts = gru->gs_gts[ctxnum]; + /* + * We are grabbing locks out of order, so trylock is + * needed. GTSs are usually not locked, so the odds of + * success are high. If trylock fails, try to steal a + * different GSEG. + */ + if (ngts && mutex_trylock(&ngts->ts_ctxlock)) + break; + ngts = NULL; + flag = 1; + } + spin_unlock(&gru->gs_lock); + if (ngts || (flag && gru == gru0 && ctxnum == ctxnum0)) + break; + ctxnum = 0; + gru = next_gru(blade, gru); + } + blade->bs_lru_gru = gru; + blade->bs_lru_ctxnum = ctxnum; + spin_unlock(&blade->bs_lock); + preempt_enable(); + + if (ngts) { + STAT(steal_context); + ngts->ts_steal_jiffies = jiffies; + gru_unload_context(ngts, 1); + mutex_unlock(&ngts->ts_ctxlock); + } else { + STAT(steal_context_failed); + } + gru_dbg(grudev, + "stole gru %x, ctxnum %d from gts %p. Need cb %d, ds %d;" + " avail cb %ld, ds %ld\n", + gru->gs_gid, ctxnum, ngts, cbr, dsr, hweight64(gru->gs_cbr_map), + hweight64(gru->gs_dsr_map)); +} + +/* + * Scan the GRUs on the local blade & assign a GRU context. + */ +static struct gru_state *gru_assign_gru_context(struct gru_thread_state *gts) +{ + struct gru_state *gru, *grux; + int i, max_active_contexts; + + preempt_disable(); + +again: + gru = NULL; + max_active_contexts = GRU_NUM_CCH; + for_each_gru_on_blade(grux, uv_numa_blade_id(), i) { + if (check_gru_resources(grux, gts->ts_cbr_au_count, + gts->ts_dsr_au_count, + max_active_contexts)) { + gru = grux; + max_active_contexts = grux->gs_active_contexts; + if (max_active_contexts == 0) + break; + } + } + + if (gru) { + spin_lock(&gru->gs_lock); + if (!check_gru_resources(gru, gts->ts_cbr_au_count, + gts->ts_dsr_au_count, GRU_NUM_CCH)) { + spin_unlock(&gru->gs_lock); + goto again; + } + reserve_gru_resources(gru, gts); + gts->ts_gru = gru; + gts->ts_ctxnum = + find_first_zero_bit(&gru->gs_context_map, GRU_NUM_CCH); + BUG_ON(gts->ts_ctxnum == GRU_NUM_CCH); + atomic_inc(>s->ts_refcnt); + gru->gs_gts[gts->ts_ctxnum] = gts; + __set_bit(gts->ts_ctxnum, &gru->gs_context_map); + spin_unlock(&gru->gs_lock); + + STAT(assign_context); + gru_dbg(grudev, + "gseg %p, gts %p, gru %x, ctx %d, cbr %d, dsr %d\n", + gseg_virtual_address(gts->ts_gru, gts->ts_ctxnum), gts, + gts->ts_gru->gs_gid, gts->ts_ctxnum, + gts->ts_cbr_au_count, gts->ts_dsr_au_count); + } else { + gru_dbg(grudev, "failed to allocate a GTS %s\n", ""); + STAT(assign_context_failed); + } + + preempt_enable(); + return gru; +} + +/* + * gru_nopage + * + * Map the user's GRU segment + */ +int gru_fault(struct vm_area_struct *vma, struct vm_fault *vmf) +{ + struct gru_thread_state *gts; + unsigned long paddr, vaddr; + + vaddr = (unsigned long)vmf->virtual_address; + gru_dbg(grudev, "vma %p, vaddr 0x%lx (0x%lx)\n", + vma, vaddr, GSEG_BASE(vaddr)); + STAT(nopfn); + + gts = gru_find_thread_state(vma, TSID(vaddr, vma)); + if (!gts) + return VM_FAULT_SIGBUS; + +again: + preempt_disable(); + mutex_lock(>s->ts_ctxlock); + if (gts->ts_gru) { + if (gts->ts_gru->gs_blade_id != uv_numa_blade_id()) { + STAT(migrated_nopfn_unload); + gru_unload_context(gts, 1); + } else { + if (gru_retarget_intr(gts)) + STAT(migrated_nopfn_retarget); + } + } + + if (!gts->ts_gru) { + while (!gru_assign_gru_context(gts)) { + mutex_unlock(>s->ts_ctxlock); + preempt_enable(); + schedule_timeout(GRU_ASSIGN_DELAY); /* true hack ZZZ */ + if (gts->ts_steal_jiffies + GRU_STEAL_DELAY < jiffies) + gru_steal_context(gts); + goto again; + } + gru_load_context(gts); + paddr = gseg_physical_address(gts->ts_gru, gts->ts_ctxnum); + remap_pfn_range(vma, vaddr & ~(GRU_GSEG_PAGESIZE - 1), + paddr >> PAGE_SHIFT, GRU_GSEG_PAGESIZE, + vma->vm_page_prot); + } + + mutex_unlock(>s->ts_ctxlock); + preempt_enable(); + + return VM_FAULT_NOPAGE; +} + -- GitLab From 1d09d737ab017ff7a9745962e19909713ac89b37 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:33:59 -0700 Subject: [PATCH 0383/1024] GRU Driver: /proc interfaces This file externalizes some GRU state & statistics to the user using the /proc file system. Signed-off-by: Jack Steiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/gruprocfs.c | 336 +++++++++++++++++++++++++++++++ 1 file changed, 336 insertions(+) create mode 100644 drivers/misc/sgi-gru/gruprocfs.c diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c new file mode 100644 index 00000000000..bdb1ad83bbf --- /dev/null +++ b/drivers/misc/sgi-gru/gruprocfs.c @@ -0,0 +1,336 @@ +/* + * SN Platform GRU Driver + * + * PROC INTERFACES + * + * This file supports the /proc interfaces for the GRU driver + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include "gru.h" +#include "grulib.h" +#include "grutables.h" + +#define printstat(s, f) printstat_val(s, &gru_stats.f, #f) + +static void printstat_val(struct seq_file *s, atomic_long_t *v, char *id) +{ + unsigned long val = atomic_long_read(v); + + if (val) + seq_printf(s, "%16lu %s\n", val, id); +} + +static int statistics_show(struct seq_file *s, void *p) +{ + printstat(s, vdata_alloc); + printstat(s, vdata_free); + printstat(s, gts_alloc); + printstat(s, gts_free); + printstat(s, vdata_double_alloc); + printstat(s, gts_double_allocate); + printstat(s, assign_context); + printstat(s, assign_context_failed); + printstat(s, free_context); + printstat(s, load_context); + printstat(s, unload_context); + printstat(s, steal_context); + printstat(s, steal_context_failed); + printstat(s, nopfn); + printstat(s, break_cow); + printstat(s, asid_new); + printstat(s, asid_next); + printstat(s, asid_wrap); + printstat(s, asid_reuse); + printstat(s, intr); + printstat(s, call_os); + printstat(s, call_os_check_for_bug); + printstat(s, call_os_wait_queue); + printstat(s, user_flush_tlb); + printstat(s, user_unload_context); + printstat(s, user_exception); + printstat(s, set_task_slice); + printstat(s, migrate_check); + printstat(s, migrated_retarget); + printstat(s, migrated_unload); + printstat(s, migrated_unload_delay); + printstat(s, migrated_nopfn_retarget); + printstat(s, migrated_nopfn_unload); + printstat(s, tlb_dropin); + printstat(s, tlb_dropin_fail_no_asid); + printstat(s, tlb_dropin_fail_upm); + printstat(s, tlb_dropin_fail_invalid); + printstat(s, tlb_dropin_fail_range_active); + printstat(s, tlb_dropin_fail_idle); + printstat(s, tlb_dropin_fail_fmm); + printstat(s, mmu_invalidate_range); + printstat(s, mmu_invalidate_page); + printstat(s, mmu_clear_flush_young); + printstat(s, flush_tlb); + printstat(s, flush_tlb_gru); + printstat(s, flush_tlb_gru_tgh); + printstat(s, flush_tlb_gru_zero_asid); + printstat(s, copy_gpa); + printstat(s, mesq_receive); + printstat(s, mesq_receive_none); + printstat(s, mesq_send); + printstat(s, mesq_send_failed); + printstat(s, mesq_noop); + printstat(s, mesq_send_unexpected_error); + printstat(s, mesq_send_lb_overflow); + printstat(s, mesq_send_qlimit_reached); + printstat(s, mesq_send_amo_nacked); + printstat(s, mesq_send_put_nacked); + printstat(s, mesq_qf_not_full); + printstat(s, mesq_qf_locked); + printstat(s, mesq_qf_noop_not_full); + printstat(s, mesq_qf_switch_head_failed); + printstat(s, mesq_qf_unexpected_error); + printstat(s, mesq_noop_unexpected_error); + printstat(s, mesq_noop_lb_overflow); + printstat(s, mesq_noop_qlimit_reached); + printstat(s, mesq_noop_amo_nacked); + printstat(s, mesq_noop_put_nacked); + return 0; +} + +static ssize_t statistics_write(struct file *file, const char __user *userbuf, + size_t count, loff_t *data) +{ + memset(&gru_stats, 0, sizeof(gru_stats)); + return count; +} + +static int options_show(struct seq_file *s, void *p) +{ + seq_printf(s, "0x%lx\n", options); + return 0; +} + +static ssize_t options_write(struct file *file, const char __user *userbuf, + size_t count, loff_t *data) +{ + unsigned long val; + char buf[80]; + + if (copy_from_user + (buf, userbuf, count < sizeof(buf) ? count : sizeof(buf))) + return -EFAULT; + if (!strict_strtoul(buf, 10, &val)) + options = val; + + return count; +} + +static int cch_seq_show(struct seq_file *file, void *data) +{ + long gid = *(long *)data; + int i; + struct gru_state *gru = GID_TO_GRU(gid); + struct gru_thread_state *ts; + const char *mode[] = { "??", "UPM", "INTR", "OS_POLL" }; + + if (gid == 0) + seq_printf(file, "#%5s%5s%6s%9s%6s%8s%8s\n", "gid", "bid", + "ctx#", "pid", "cbrs", "dsbytes", "mode"); + if (gru) + for (i = 0; i < GRU_NUM_CCH; i++) { + ts = gru->gs_gts[i]; + if (!ts) + continue; + seq_printf(file, " %5d%5d%6d%9d%6d%8d%8s\n", + gru->gs_gid, gru->gs_blade_id, i, + ts->ts_tgid_owner, + ts->ts_cbr_au_count * GRU_CBR_AU_SIZE, + ts->ts_cbr_au_count * GRU_DSR_AU_BYTES, + mode[ts->ts_user_options & + GRU_OPT_MISS_MASK]); + } + + return 0; +} + +static int gru_seq_show(struct seq_file *file, void *data) +{ + long gid = *(long *)data, ctxfree, cbrfree, dsrfree; + struct gru_state *gru = GID_TO_GRU(gid); + + if (gid == 0) { + seq_printf(file, "#%5s%5s%7s%6s%6s%8s%6s%6s\n", "gid", "nid", + "ctx", "cbr", "dsr", "ctx", "cbr", "dsr"); + seq_printf(file, "#%5s%5s%7s%6s%6s%8s%6s%6s\n", "", "", "busy", + "busy", "busy", "free", "free", "free"); + } + if (gru) { + ctxfree = GRU_NUM_CCH - gru->gs_active_contexts; + cbrfree = hweight64(gru->gs_cbr_map) * GRU_CBR_AU_SIZE; + dsrfree = hweight64(gru->gs_dsr_map) * GRU_DSR_AU_BYTES; + seq_printf(file, " %5d%5d%7ld%6ld%6ld%8ld%6ld%6ld\n", + gru->gs_gid, gru->gs_blade_id, GRU_NUM_CCH - ctxfree, + GRU_NUM_CBE - cbrfree, GRU_NUM_DSR_BYTES - dsrfree, + ctxfree, cbrfree, dsrfree); + } + + return 0; +} + +static void seq_stop(struct seq_file *file, void *data) +{ +} + +static void *seq_start(struct seq_file *file, loff_t *gid) +{ + if (*gid < GRU_MAX_GRUS) + return gid; + return NULL; +} + +static void *seq_next(struct seq_file *file, void *data, loff_t *gid) +{ + (*gid)++; + if (*gid < GRU_MAX_GRUS) + return gid; + return NULL; +} + +static const struct seq_operations cch_seq_ops = { + .start = seq_start, + .next = seq_next, + .stop = seq_stop, + .show = cch_seq_show +}; + +static const struct seq_operations gru_seq_ops = { + .start = seq_start, + .next = seq_next, + .stop = seq_stop, + .show = gru_seq_show +}; + +static int statistics_open(struct inode *inode, struct file *file) +{ + return single_open(file, statistics_show, NULL); +} + +static int options_open(struct inode *inode, struct file *file) +{ + return single_open(file, options_show, NULL); +} + +static int cch_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &cch_seq_ops); +} + +static int gru_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &gru_seq_ops); +} + +/* *INDENT-OFF* */ +static const struct file_operations statistics_fops = { + .open = statistics_open, + .read = seq_read, + .write = statistics_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations options_fops = { + .open = options_open, + .read = seq_read, + .write = options_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations cch_fops = { + .open = cch_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; +static const struct file_operations gru_fops = { + .open = gru_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +static struct proc_entry { + char *name; + int mode; + const struct file_operations *fops; + struct proc_dir_entry *entry; +} proc_files[] = { + {"statistics", 0644, &statistics_fops}, + {"debug_options", 0644, &options_fops}, + {"cch_status", 0444, &cch_fops}, + {"gru_status", 0444, &gru_fops}, + {NULL} +}; +/* *INDENT-ON* */ + +static struct proc_dir_entry *proc_gru __read_mostly; + +static int create_proc_file(struct proc_entry *p) +{ + p->entry = create_proc_entry(p->name, p->mode, proc_gru); + if (!p->entry) + return -1; + p->entry->proc_fops = p->fops; + return 0; +} + +static void delete_proc_files(void) +{ + struct proc_entry *p; + + if (proc_gru) { + for (p = proc_files; p->name; p++) + if (p->entry) + remove_proc_entry(p->name, proc_gru); + remove_proc_entry("gru", NULL); + } +} + +int gru_proc_init(void) +{ + struct proc_entry *p; + + proc_mkdir("sgi_uv", NULL); + proc_gru = proc_mkdir("sgi_uv/gru", NULL); + + for (p = proc_files; p->name; p++) + if (create_proc_file(p)) + goto err; + return 0; + +err: + delete_proc_files(); + return -1; +} + +void gru_proc_exit(void) +{ + delete_proc_files(); +} -- GitLab From ee5b8feca3af01400e26637209a72fbf137c82ff Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:33:59 -0700 Subject: [PATCH 0384/1024] GRU Driver: TLB flushing, MMUOPS callouts This file contains the functions for handlinf GRU TLB flushing, This includes functions to handle the MMUOPS callouts. Signed-off-by: Jack Steiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/grutlbpurge.c | 370 +++++++++++++++++++++++++++++ 1 file changed, 370 insertions(+) create mode 100644 drivers/misc/sgi-gru/grutlbpurge.c diff --git a/drivers/misc/sgi-gru/grutlbpurge.c b/drivers/misc/sgi-gru/grutlbpurge.c new file mode 100644 index 00000000000..bb6b0e64e10 --- /dev/null +++ b/drivers/misc/sgi-gru/grutlbpurge.c @@ -0,0 +1,370 @@ +/* + * SN Platform GRU Driver + * + * MMUOPS callbacks + TLB flushing + * + * This file handles emu notifier callbacks from the core kernel. The callbacks + * are used to update the TLB in the GRU as a result of changes in the + * state of a process address space. This file also handles TLB invalidates + * from the GRU driver. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "gru.h" +#include "grutables.h" +#include + +#define gru_random() get_cycles() + +/* ---------------------------------- TLB Invalidation functions -------- + * get_tgh_handle + * + * Find a TGH to use for issuing a TLB invalidate. For GRUs that are on the + * local blade, use a fixed TGH that is a function of the blade-local cpu + * number. Normally, this TGH is private to the cpu & no contention occurs for + * the TGH. For offblade GRUs, select a random TGH in the range above the + * private TGHs. A spinlock is required to access this TGH & the lock must be + * released when the invalidate is completes. This sucks, but it is the best we + * can do. + * + * Note that the spinlock is IN the TGH handle so locking does not involve + * additional cache lines. + * + */ +static inline int get_off_blade_tgh(struct gru_state *gru) +{ + int n; + + n = GRU_NUM_TGH - gru->gs_tgh_first_remote; + n = gru_random() % n; + n += gru->gs_tgh_first_remote; + return n; +} + +static inline int get_on_blade_tgh(struct gru_state *gru) +{ + return uv_blade_processor_id() >> gru->gs_tgh_local_shift; +} + +static struct gru_tlb_global_handle *get_lock_tgh_handle(struct gru_state + *gru) +{ + struct gru_tlb_global_handle *tgh; + int n; + + preempt_disable(); + if (uv_numa_blade_id() == gru->gs_blade_id) + n = get_on_blade_tgh(gru); + else + n = get_off_blade_tgh(gru); + tgh = get_tgh_by_index(gru, n); + lock_tgh_handle(tgh); + + return tgh; +} + +static void get_unlock_tgh_handle(struct gru_tlb_global_handle *tgh) +{ + unlock_tgh_handle(tgh); + preempt_enable(); +} + +/* + * gru_flush_tlb_range + * + * General purpose TLB invalidation function. This function scans every GRU in + * the ENTIRE system (partition) looking for GRUs where the specified MM has + * been accessed by the GRU. For each GRU found, the TLB must be invalidated OR + * the ASID invalidated. Invalidating an ASID causes a new ASID to be assigned + * on the next fault. This effectively flushes the ENTIRE TLB for the MM at the + * cost of (possibly) a large number of future TLBmisses. + * + * The current algorithm is optimized based on the following (somewhat true) + * assumptions: + * - GRU contexts are not loaded into a GRU unless a reference is made to + * the data segment or control block (this is true, not an assumption). + * If a DS/CB is referenced, the user will also issue instructions that + * cause TLBmisses. It is not necessary to optimize for the case where + * contexts are loaded but no instructions cause TLB misses. (I know + * this will happen but I'm not optimizing for it). + * - GRU instructions to invalidate TLB entries are SLOOOOWWW - normally + * a few usec but in unusual cases, it could be longer. Avoid if + * possible. + * - intrablade process migration between cpus is not frequent but is + * common. + * - a GRU context is not typically migrated to a different GRU on the + * blade because of intrablade migration + * - interblade migration is rare. Processes migrate their GRU context to + * the new blade. + * - if interblade migration occurs, migration back to the original blade + * is very very rare (ie., no optimization for this case) + * - most GRU instruction operate on a subset of the user REGIONS. Code + * & shared library regions are not likely targets of GRU instructions. + * + * To help improve the efficiency of TLB invalidation, the GMS data + * structure is maintained for EACH address space (MM struct). The GMS is + * also the structure that contains the pointer to the mmu callout + * functions. This structure is linked to the mm_struct for the address space + * using the mmu "register" function. The mmu interfaces are used to + * provide the callbacks for TLB invalidation. The GMS contains: + * + * - asid[maxgrus] array. ASIDs are assigned to a GRU when a context is + * loaded into the GRU. + * - asidmap[maxgrus]. bitmap to make it easier to find non-zero asids in + * the above array + * - ctxbitmap[maxgrus]. Indicates the contexts that are currently active + * in the GRU for the address space. This bitmap must be passed to the + * GRU to do an invalidate. + * + * The current algorithm for invalidating TLBs is: + * - scan the asidmap for GRUs where the context has been loaded, ie, + * asid is non-zero. + * - for each gru found: + * - if the ctxtmap is non-zero, there are active contexts in the + * GRU. TLB invalidate instructions must be issued to the GRU. + * - if the ctxtmap is zero, no context is active. Set the ASID to + * zero to force a full TLB invalidation. This is fast but will + * cause a lot of TLB misses if the context is reloaded onto the + * GRU + * + */ + +void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start, + unsigned long len) +{ + struct gru_state *gru; + struct gru_mm_tracker *asids; + struct gru_tlb_global_handle *tgh; + unsigned long num; + int grupagesize, pagesize, pageshift, gid, asid; + + /* ZZZ TODO - handle huge pages */ + pageshift = PAGE_SHIFT; + pagesize = (1UL << pageshift); + grupagesize = GRU_PAGESIZE(pageshift); + num = min(((len + pagesize - 1) >> pageshift), GRUMAXINVAL); + + STAT(flush_tlb); + gru_dbg(grudev, "gms %p, start 0x%lx, len 0x%lx, asidmap 0x%lx\n", gms, + start, len, gms->ms_asidmap[0]); + + spin_lock(&gms->ms_asid_lock); + for_each_gru_in_bitmap(gid, gms->ms_asidmap) { + STAT(flush_tlb_gru); + gru = GID_TO_GRU(gid); + asids = gms->ms_asids + gid; + asid = asids->mt_asid; + if (asids->mt_ctxbitmap && asid) { + STAT(flush_tlb_gru_tgh); + asid = GRUASID(asid, start); + gru_dbg(grudev, + " FLUSH gruid %d, asid 0x%x, num %ld, cbmap 0x%x\n", + gid, asid, num, asids->mt_ctxbitmap); + tgh = get_lock_tgh_handle(gru); + tgh_invalidate(tgh, start, 0, asid, grupagesize, 0, + num - 1, asids->mt_ctxbitmap); + get_unlock_tgh_handle(tgh); + } else { + STAT(flush_tlb_gru_zero_asid); + asids->mt_asid = 0; + __clear_bit(gru->gs_gid, gms->ms_asidmap); + gru_dbg(grudev, + " CLEARASID gruid %d, asid 0x%x, cbtmap 0x%x, asidmap 0x%lx\n", + gid, asid, asids->mt_ctxbitmap, + gms->ms_asidmap[0]); + } + } + spin_unlock(&gms->ms_asid_lock); +} + +/* + * Flush the entire TLB on a chiplet. + */ +void gru_flush_all_tlb(struct gru_state *gru) +{ + struct gru_tlb_global_handle *tgh; + + gru_dbg(grudev, "gru %p, gid %d\n", gru, gru->gs_gid); + tgh = get_lock_tgh_handle(gru); + tgh_invalidate(tgh, 0, ~0, 0, 1, 1, GRUMAXINVAL - 1, 0); + get_unlock_tgh_handle(tgh); + preempt_enable(); +} + +/* + * MMUOPS notifier callout functions + */ +static void gru_invalidate_range_start(struct mmu_notifier *mn, + struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct, + ms_notifier); + + STAT(mmu_invalidate_range); + atomic_inc(&gms->ms_range_active); + gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx, act %d\n", gms, + start, end, atomic_read(&gms->ms_range_active)); + gru_flush_tlb_range(gms, start, end - start); +} + +static void gru_invalidate_range_end(struct mmu_notifier *mn, + struct mm_struct *mm, unsigned long start, + unsigned long end) +{ + struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct, + ms_notifier); + + atomic_dec(&gms->ms_range_active); + wake_up_all(&gms->ms_wait_queue); + gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx\n", gms, start, end); +} + +static void gru_invalidate_page(struct mmu_notifier *mn, struct mm_struct *mm, + unsigned long address) +{ + struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct, + ms_notifier); + + STAT(mmu_invalidate_page); + gru_flush_tlb_range(gms, address, PAGE_SIZE); + gru_dbg(grudev, "gms %p, address 0x%lx\n", gms, address); +} + +static void gru_release(struct mmu_notifier *mn, struct mm_struct *mm) +{ + struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct, + ms_notifier); + + gms->ms_released = 1; + gru_dbg(grudev, "gms %p\n", gms); +} + + +static const struct mmu_notifier_ops gru_mmuops = { + .invalidate_page = gru_invalidate_page, + .invalidate_range_start = gru_invalidate_range_start, + .invalidate_range_end = gru_invalidate_range_end, + .release = gru_release, +}; + +/* Move this to the basic mmu_notifier file. But for now... */ +static struct mmu_notifier *mmu_find_ops(struct mm_struct *mm, + const struct mmu_notifier_ops *ops) +{ + struct mmu_notifier *mn, *gru_mn = NULL; + struct hlist_node *n; + + if (mm->mmu_notifier_mm) { + rcu_read_lock(); + hlist_for_each_entry_rcu(mn, n, &mm->mmu_notifier_mm->list, + hlist) + if (mn->ops == ops) { + gru_mn = mn; + break; + } + rcu_read_unlock(); + } + return gru_mn; +} + +struct gru_mm_struct *gru_register_mmu_notifier(void) +{ + struct gru_mm_struct *gms; + struct mmu_notifier *mn; + + mn = mmu_find_ops(current->mm, &gru_mmuops); + if (mn) { + gms = container_of(mn, struct gru_mm_struct, ms_notifier); + atomic_inc(&gms->ms_refcnt); + } else { + gms = kzalloc(sizeof(*gms), GFP_KERNEL); + if (gms) { + spin_lock_init(&gms->ms_asid_lock); + gms->ms_notifier.ops = &gru_mmuops; + atomic_set(&gms->ms_refcnt, 1); + init_waitqueue_head(&gms->ms_wait_queue); + __mmu_notifier_register(&gms->ms_notifier, current->mm); + } + } + gru_dbg(grudev, "gms %p, refcnt %d\n", gms, + atomic_read(&gms->ms_refcnt)); + return gms; +} + +void gru_drop_mmu_notifier(struct gru_mm_struct *gms) +{ + gru_dbg(grudev, "gms %p, refcnt %d, released %d\n", gms, + atomic_read(&gms->ms_refcnt), gms->ms_released); + if (atomic_dec_return(&gms->ms_refcnt) == 0) { + if (!gms->ms_released) + mmu_notifier_unregister(&gms->ms_notifier, current->mm); + kfree(gms); + } +} + +/* + * Setup TGH parameters. There are: + * - 24 TGH handles per GRU chiplet + * - a portion (MAX_LOCAL_TGH) of the handles are reserved for + * use by blade-local cpus + * - the rest are used by off-blade cpus. This usage is + * less frequent than blade-local usage. + * + * For now, use 16 handles for local flushes, 8 for remote flushes. If the blade + * has less tan or equal to 16 cpus, each cpu has a unique handle that it can + * use. + */ +#define MAX_LOCAL_TGH 16 + +void gru_tgh_flush_init(struct gru_state *gru) +{ + int cpus, shift = 0, n; + + cpus = uv_blade_nr_possible_cpus(gru->gs_blade_id); + + /* n = cpus rounded up to next power of 2 */ + if (cpus) { + n = 1 << fls(cpus - 1); + + /* + * shift count for converting local cpu# to TGH index + * 0 if cpus <= MAX_LOCAL_TGH, + * 1 if cpus <= 2*MAX_LOCAL_TGH, + * etc + */ + shift = max(0, fls(n - 1) - fls(MAX_LOCAL_TGH - 1)); + } + gru->gs_tgh_local_shift = shift; + + /* first starting TGH index to use for remote purges */ + gru->gs_tgh_first_remote = (cpus + (1 << shift) - 1) >> shift; + +} -- GitLab From 3c45f6928322773b1810fbec1ece77056f914114 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:34:00 -0700 Subject: [PATCH 0385/1024] GRU Driver: driver makefile This patch adds the GRU driver makefile Signed-off-by: Jack Steiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/Makefile | 3 +++ 1 file changed, 3 insertions(+) create mode 100644 drivers/misc/sgi-gru/Makefile diff --git a/drivers/misc/sgi-gru/Makefile b/drivers/misc/sgi-gru/Makefile new file mode 100644 index 00000000000..d03597a521b --- /dev/null +++ b/drivers/misc/sgi-gru/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_SGI_GRU) := gru.o +gru-y := grufile.o grumain.o grufault.o grutlbpurge.o gruprocfs.o grukservices.o + -- GitLab From 0d39741a27d86d305cc75ba626392be410dcbab9 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:34:01 -0700 Subject: [PATCH 0386/1024] GRU Driver: export is_uv_system(), zap_page_range() & follow_page() Exports needed by the GRU driver. Signed-off-by: Jack Steiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/kernel/genapic_64.c | 1 + mm/memory.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c index 1fa8be5bd21..eaff0bbb144 100644 --- a/arch/x86/kernel/genapic_64.c +++ b/arch/x86/kernel/genapic_64.c @@ -99,3 +99,4 @@ int is_uv_system(void) { return uv_system_type != UV_NONE; } +EXPORT_SYMBOL_GPL(is_uv_system); diff --git a/mm/memory.c b/mm/memory.c index 6793b9c6810..0e4eea10c7b 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -993,6 +993,7 @@ unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address, tlb_finish_mmu(tlb, address, end); return end; } +EXPORT_SYMBOL_GPL(zap_page_range); /** * zap_vma_ptes - remove ptes mapping the vma @@ -1110,6 +1111,7 @@ no_page_table: } return page; } +EXPORT_SYMBOL_GPL(follow_page); /* Can we do the FOLL_ANON optimization? */ static inline int use_zero_page(struct vm_area_struct *vma) -- GitLab From 3d919e5f6b440bb0cc7996eb7628b29be09e6343 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:34:01 -0700 Subject: [PATCH 0387/1024] GRU Driver: driver/misc Makefile & Kconfig changes Driver/misc changes for the GRU driver Signed-off-by: Jack Steiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/Kconfig | 23 +++++++++++++++++++++++ drivers/misc/Makefile | 1 + 2 files changed, 24 insertions(+) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index f5ade1904aa..4b288f43ca8 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -450,4 +450,27 @@ config HP_ILO To compile this driver as a module, choose M here: the module will be called hpilo. +config SGI_GRU + tristate "SGI GRU driver" + depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP + default n + select MMU_NOTIFIER + ---help--- + The GRU is a hardware resource located in the system chipset. The GRU + contains memory that can be mmapped into the user address space. This memory is + used to communicate with the GRU to perform functions such as load/store, + scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user + instructions using user virtual addresses. GRU instructions (ex., bcopy) use + user virtual addresses for operands. + + If you are not running on a SGI UV system, say N. + +config SGI_GRU_DEBUG + bool "SGI GRU driver debug" + depends on SGI_GRU + default n + ---help--- + This option enables addition debugging code for the SGI GRU driver. If + you are unsure, say N. + endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index f5e273420c0..c6c13f60b45 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -28,4 +28,5 @@ obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ +obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_HP_ILO) += hpilo.o -- GitLab From 9ca8e40c130c906c1060d105e63628410c860261 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Tue, 29 Jul 2008 22:34:02 -0700 Subject: [PATCH 0388/1024] GRU Driver V3: fixes to resolve code review comments Fixes problems identified in a code review: - add comment with high level dscription of the GRU - prepend "gru_" to all global names - delete unused function - couple of trivial bug fixes [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jack Steiner Cc: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/gru_instructions.h | 10 ---- drivers/misc/sgi-gru/grufile.c | 8 ++- drivers/misc/sgi-gru/grukservices.c | 6 +- drivers/misc/sgi-gru/grumain.c | 16 ++++-- drivers/misc/sgi-gru/gruprocfs.c | 4 +- drivers/misc/sgi-gru/grutables.h | 74 +++++++++++++++++++++++-- drivers/misc/sgi-gru/grutlbpurge.c | 4 +- 7 files changed, 93 insertions(+), 29 deletions(-) diff --git a/drivers/misc/sgi-gru/gru_instructions.h b/drivers/misc/sgi-gru/gru_instructions.h index 3159b261c5a..0dc36225c7c 100644 --- a/drivers/misc/sgi-gru/gru_instructions.h +++ b/drivers/misc/sgi-gru/gru_instructions.h @@ -284,16 +284,6 @@ __opword(unsigned char opcode, unsigned char exopc, unsigned char xtype, (exopc << GRU_CB_EXOPC_SHFT); } -/* - * Prefetch a cacheline. Fetch is unconditional. Must page fault if - * no valid TLB entry is found. - * ??? should I use actual "load" or hardware prefetch??? - */ -static inline void gru_prefetch(void *p) -{ - *(volatile char *)p; -} - /* * Architecture specific intrinsics */ diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 09c9c65ff9d..23c91f5f6b6 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -112,6 +112,10 @@ static int gru_file_mmap(struct file *file, struct vm_area_struct *vma) if ((vma->vm_flags & (VM_SHARED | VM_WRITE)) != (VM_SHARED | VM_WRITE)) return -EPERM; + if (vma->vm_start & (GRU_GSEG_PAGESIZE - 1) || + vma->vm_end & (GRU_GSEG_PAGESIZE - 1)) + return -EINVAL; + vma->vm_flags |= (VM_IO | VM_DONTCOPY | VM_LOCKED | VM_DONTEXPAND | VM_PFNMAP | VM_RESERVED); @@ -471,8 +475,8 @@ struct vm_operations_struct gru_vm_ops = { module_init(gru_init); module_exit(gru_exit); -module_param(options, ulong, 0644); -MODULE_PARM_DESC(options, "Various debug options"); +module_param(gru_options, ulong, 0644); +MODULE_PARM_DESC(gru_options, "Various debug options"); MODULE_AUTHOR("Silicon Graphics, Inc."); MODULE_LICENSE("GPL"); diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c index 234d165fb11..dfd49af0fe1 100644 --- a/drivers/misc/sgi-gru/grukservices.c +++ b/drivers/misc/sgi-gru/grukservices.c @@ -638,11 +638,11 @@ int gru_kservices_init(struct gru_state *gru) cpus_possible = uv_blade_nr_possible_cpus(gru->gs_blade_id); num = GRU_NUM_KERNEL_CBR * cpus_possible; - cbr_map = reserve_gru_cb_resources(gru, GRU_CB_COUNT_TO_AU(num), NULL); + cbr_map = gru_reserve_cb_resources(gru, GRU_CB_COUNT_TO_AU(num), NULL); gru->gs_reserved_cbrs += num; num = GRU_NUM_KERNEL_DSR_BYTES * cpus_possible; - dsr_map = reserve_gru_ds_resources(gru, GRU_DS_BYTES_TO_AU(num), NULL); + dsr_map = gru_reserve_ds_resources(gru, GRU_DS_BYTES_TO_AU(num), NULL); gru->gs_reserved_dsr_bytes += num; gru->gs_active_contexts++; @@ -673,7 +673,7 @@ int gru_kservices_init(struct gru_state *gru) } unlock_cch_handle(cch); - if (options & GRU_QUICKLOOK) + if (gru_options & GRU_QUICKLOOK) quicktest(gru); return 0; } diff --git a/drivers/misc/sgi-gru/grumain.c b/drivers/misc/sgi-gru/grumain.c index aef6822cb80..0eeb8dddd2f 100644 --- a/drivers/misc/sgi-gru/grumain.c +++ b/drivers/misc/sgi-gru/grumain.c @@ -22,7 +22,7 @@ #include "grutables.h" #include "gruhandles.h" -unsigned long options __read_mostly; +unsigned long gru_options __read_mostly; static struct device_driver gru_driver = { .name = "gru" @@ -163,14 +163,14 @@ static unsigned long reserve_resources(unsigned long *p, int n, int mmax, return bits; } -unsigned long reserve_gru_cb_resources(struct gru_state *gru, int cbr_au_count, +unsigned long gru_reserve_cb_resources(struct gru_state *gru, int cbr_au_count, char *cbmap) { return reserve_resources(&gru->gs_cbr_map, cbr_au_count, GRU_CBR_AU, cbmap); } -unsigned long reserve_gru_ds_resources(struct gru_state *gru, int dsr_au_count, +unsigned long gru_reserve_ds_resources(struct gru_state *gru, int dsr_au_count, char *dsmap) { return reserve_resources(&gru->gs_dsr_map, dsr_au_count, GRU_DSR_AU, @@ -182,10 +182,10 @@ static void reserve_gru_resources(struct gru_state *gru, { gru->gs_active_contexts++; gts->ts_cbr_map = - reserve_gru_cb_resources(gru, gts->ts_cbr_au_count, + gru_reserve_cb_resources(gru, gts->ts_cbr_au_count, gts->ts_cbr_idx); gts->ts_dsr_map = - reserve_gru_ds_resources(gru, gts->ts_dsr_au_count, NULL); + gru_reserve_ds_resources(gru, gts->ts_dsr_au_count, NULL); } static void free_gru_resources(struct gru_state *gru, @@ -416,6 +416,7 @@ static void gru_free_gru_context(struct gru_thread_state *gts) /* * Prefetching cachelines help hardware performance. + * (Strictly a performance enhancement. Not functionally required). */ static void prefetch_data(void *p, int num, int stride) { @@ -746,6 +747,8 @@ again: * gru_nopage * * Map the user's GRU segment + * + * Note: gru segments alway mmaped on GRU_GSEG_PAGESIZE boundaries. */ int gru_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { @@ -757,6 +760,7 @@ int gru_fault(struct vm_area_struct *vma, struct vm_fault *vmf) vma, vaddr, GSEG_BASE(vaddr)); STAT(nopfn); + /* The following check ensures vaddr is a valid address in the VMA */ gts = gru_find_thread_state(vma, TSID(vaddr, vma)); if (!gts) return VM_FAULT_SIGBUS; @@ -775,7 +779,7 @@ again: } if (!gts->ts_gru) { - while (!gru_assign_gru_context(gts)) { + if (!gru_assign_gru_context(gts)) { mutex_unlock(>s->ts_ctxlock); preempt_enable(); schedule_timeout(GRU_ASSIGN_DELAY); /* true hack ZZZ */ diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c index bdb1ad83bbf..533923f83f1 100644 --- a/drivers/misc/sgi-gru/gruprocfs.c +++ b/drivers/misc/sgi-gru/gruprocfs.c @@ -122,7 +122,7 @@ static ssize_t statistics_write(struct file *file, const char __user *userbuf, static int options_show(struct seq_file *s, void *p) { - seq_printf(s, "0x%lx\n", options); + seq_printf(s, "0x%lx\n", gru_options); return 0; } @@ -136,7 +136,7 @@ static ssize_t options_write(struct file *file, const char __user *userbuf, (buf, userbuf, count < sizeof(buf) ? count : sizeof(buf))) return -EFAULT; if (!strict_strtoul(buf, 10, &val)) - options = val; + gru_options = val; return count; } diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h index f97d8464012..4251018f70f 100644 --- a/drivers/misc/sgi-gru/grutables.h +++ b/drivers/misc/sgi-gru/grutables.h @@ -24,6 +24,70 @@ #define __GRUTABLES_H__ /* + * GRU Chiplet: + * The GRU is a user addressible memory accelerator. It provides + * several forms of load, store, memset, bcopy instructions. In addition, it + * contains special instructions for AMOs, sending messages to message + * queues, etc. + * + * The GRU is an integral part of the node controller. It connects + * directly to the cpu socket. In its current implementation, there are 2 + * GRU chiplets in the node controller on each blade (~node). + * + * The entire GRU memory space is fully coherent and cacheable by the cpus. + * + * Each GRU chiplet has a physical memory map that looks like the following: + * + * +-----------------+ + * |/////////////////| + * |/////////////////| + * |/////////////////| + * |/////////////////| + * |/////////////////| + * |/////////////////| + * |/////////////////| + * |/////////////////| + * +-----------------+ + * | system control | + * +-----------------+ _______ +-------------+ + * |/////////////////| / | | + * |/////////////////| / | | + * |/////////////////| / | instructions| + * |/////////////////| / | | + * |/////////////////| / | | + * |/////////////////| / |-------------| + * |/////////////////| / | | + * +-----------------+ | | + * | context 15 | | data | + * +-----------------+ | | + * | ...... | \ | | + * +-----------------+ \____________ +-------------+ + * | context 1 | + * +-----------------+ + * | context 0 | + * +-----------------+ + * + * Each of the "contexts" is a chunk of memory that can be mmaped into user + * space. The context consists of 2 parts: + * + * - an instruction space that can be directly accessed by the user + * to issue GRU instructions and to check instruction status. + * + * - a data area that acts as normal RAM. + * + * User instructions contain virtual addresses of data to be accessed by the + * GRU. The GRU contains a TLB that is used to convert these user virtual + * addresses to physical addresses. + * + * The "system control" area of the GRU chiplet is used by the kernel driver + * to manage user contexts and to perform functions such as TLB dropin and + * purging. + * + * One context may be reserved for the kernel and used for cross-partition + * communication. The GRU will also be used to asynchronously zero out + * large blocks of memory (not currently implemented). + * + * * Tables: * * VDATA-VMA Data - Holds a few parameters. Head of linked list of @@ -190,14 +254,14 @@ struct gru_stats_s { #define GRU_STEAL_DELAY ((HZ * 200) / 1000) #define STAT(id) do { \ - if (options & OPT_STATS) \ + if (gru_options & OPT_STATS) \ atomic_long_inc(&gru_stats.id); \ } while (0) #ifdef CONFIG_SGI_GRU_DEBUG #define gru_dbg(dev, fmt, x...) \ do { \ - if (options & OPT_DPRINT) \ + if (gru_options & OPT_DPRINT) \ dev_dbg(dev, "%s: " fmt, __func__, x); \ } while (0) #else @@ -529,9 +593,9 @@ extern void gru_flush_all_tlb(struct gru_state *gru); extern int gru_proc_init(void); extern void gru_proc_exit(void); -extern unsigned long reserve_gru_cb_resources(struct gru_state *gru, +extern unsigned long gru_reserve_cb_resources(struct gru_state *gru, int cbr_au_count, char *cbmap); -extern unsigned long reserve_gru_ds_resources(struct gru_state *gru, +extern unsigned long gru_reserve_ds_resources(struct gru_state *gru, int dsr_au_count, char *dsmap); extern int gru_fault(struct vm_area_struct *, struct vm_fault *vmf); extern struct gru_mm_struct *gru_register_mmu_notifier(void); @@ -540,6 +604,6 @@ extern void gru_drop_mmu_notifier(struct gru_mm_struct *gms); extern void gru_flush_tlb_range(struct gru_mm_struct *gms, unsigned long start, unsigned long len); -extern unsigned long options; +extern unsigned long gru_options; #endif /* __GRUTABLES_H__ */ diff --git a/drivers/misc/sgi-gru/grutlbpurge.c b/drivers/misc/sgi-gru/grutlbpurge.c index bb6b0e64e10..bcfd5425e2e 100644 --- a/drivers/misc/sgi-gru/grutlbpurge.c +++ b/drivers/misc/sgi-gru/grutlbpurge.c @@ -242,7 +242,9 @@ static void gru_invalidate_range_end(struct mmu_notifier *mn, struct gru_mm_struct *gms = container_of(mn, struct gru_mm_struct, ms_notifier); - atomic_dec(&gms->ms_range_active); + /* ..._and_test() provides needed barrier */ + (void)atomic_dec_and_test(&gms->ms_range_active); + wake_up_all(&gms->ms_wait_queue); gru_dbg(grudev, "gms %p, start 0x%lx, end 0x%lx\n", gms, start, end); } -- GitLab From 355c54d2e70093f09910d2ecf343023aefc219e1 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:02 -0700 Subject: [PATCH 0389/1024] sgi-xp: define is_shub() and is_uv() macros Define the is_shub()/is_uv() macros if they've not already been defined. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xp.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 03a87a307e3..83627eac412 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -25,6 +25,22 @@ #define DBUG_ON(condition) #endif +#ifndef is_shub1 +#define is_shub1() 0 +#endif + +#ifndef is_shub2 +#define is_shub2() 0 +#endif + +#ifndef is_shub +#define is_shub() (is_shub1() || is_shub2()) +#endif + +#ifndef is_uv +#define is_uv() 0 +#endif + /* * Define the maximum number of logically defined partitions the system * can support. It is constrained by the maximum number of hardware -- GitLab From da9705259848b968cdf6151b977334fe7b5b0461 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:03 -0700 Subject: [PATCH 0390/1024] sgi-xp: define xpSalError reason code Define xpSalError reason code. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xp.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 83627eac412..21cb8a31def 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -249,8 +249,9 @@ enum xp_retval { xpDisconnected, /* 51: channel disconnected (closed) */ xpBteCopyError, /* 52: bte_copy() returned error */ + xpSalError, /* 53: sn SAL error */ - xpUnknownReason /* 53: unknown reason - must be last in enum */ + xpUnknownReason /* 54: unknown reason - must be last in enum */ }; /* -- GitLab From 78ce1bbe446e9b46dcd6c1e60a4768448a8ce355 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:03 -0700 Subject: [PATCH 0391/1024] sgi-xp: define BYTES_PER_WORD Add a BYTES_PER_WORD #define. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xp.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 21cb8a31def..867fb4863d5 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -19,6 +19,9 @@ #include #include +/* >>> Add this #define to some linux header file some day. */ +#define BYTES_PER_WORD sizeof(void *) + #ifdef USE_DBUG_ON #define DBUG_ON(condition) BUG_ON(condition) #else -- GitLab From bc63d387e4f5dbbe4ea0c5ade862c38073fd7fa3 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:04 -0700 Subject: [PATCH 0392/1024] sgi-xp: support runtime selection of xp_max_npartitions Support runtime selection of the max number of partitions based on the hardware being run on. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/Makefile | 3 +- drivers/misc/sgi-xp/xp.h | 53 +++++++++----- drivers/misc/sgi-xp/xp_main.c | 84 +++++++++-------------- drivers/misc/sgi-xp/xp_sn2.c | 92 +++++++++++++++++++++++++ drivers/misc/sgi-xp/xp_uv.c | 30 ++++++++ drivers/misc/sgi-xp/xpc.h | 12 ++-- drivers/misc/sgi-xp/xpc_channel.c | 20 +++--- drivers/misc/sgi-xp/xpc_main.c | 103 ++++++++++++++-------------- drivers/misc/sgi-xp/xpc_partition.c | 16 ++--- drivers/misc/sgi-xp/xpnet.c | 4 +- 10 files changed, 266 insertions(+), 151 deletions(-) create mode 100644 drivers/misc/sgi-xp/xp_sn2.c create mode 100644 drivers/misc/sgi-xp/xp_uv.c diff --git a/drivers/misc/sgi-xp/Makefile b/drivers/misc/sgi-xp/Makefile index b6e40a7958c..b50f2921781 100644 --- a/drivers/misc/sgi-xp/Makefile +++ b/drivers/misc/sgi-xp/Makefile @@ -3,7 +3,8 @@ # obj-$(CONFIG_SGI_XP) += xp.o -xp-y := xp_main.o xp_nofault.o +xp-y := xp_main.o xp_uv.o +xp-$(CONFIG_IA64) += xp_sn2.o xp_nofault.o obj-$(CONFIG_SGI_XP) += xpc.o xpc-y := xpc_main.o xpc_channel.o xpc_partition.o diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 867fb4863d5..51087e11188 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -18,6 +18,9 @@ #include #include #include +#ifdef CONFIG_IA64 +#include +#endif /* >>> Add this #define to some linux header file some day. */ #define BYTES_PER_WORD sizeof(void *) @@ -45,17 +48,18 @@ #endif /* - * Define the maximum number of logically defined partitions the system - * can support. It is constrained by the maximum number of hardware - * partitionable regions. The term 'region' in this context refers to the - * minimum number of nodes that can comprise an access protection grouping. - * The access protection is in regards to memory, IPI and IOI. + * Define the maximum number of partitions the system can possibly support. + * It is based on the maximum number of hardware partitionable regions. The + * term 'region' in this context refers to the minimum number of nodes that + * can comprise an access protection grouping. The access protection is in + * regards to memory, IPI and IOI. * * The maximum number of hardware partitionable regions is equal to the * maximum number of nodes in the entire system divided by the minimum number * of nodes that comprise an access protection grouping. */ -#define XP_MAX_PARTITIONS 64 +#define XP_MAX_NPARTITIONS_SN2 64 +#define XP_MAX_NPARTITIONS_UV 256 /* * Define the number of u64s required to represent all the C-brick nasids @@ -112,24 +116,28 @@ xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification) * other partition that is currently up. Over these channels, kernel-level * `users' can communicate with their counterparts on the other partitions. * - * The maxinum number of channels is limited to eight. For performance reasons, - * the internal cross partition structures require sixteen bytes per channel, - * and eight allows all of this interface-shared info to fit in one cache line. +>>> The following described limitation of a max of eight channels possible +>>> pertains only to ia64-sn2. THIS ISN'T TRUE SINCE I'M PLANNING TO JUST +>>> TIE INTO THE EXISTING MECHANISM ONCE THE CHANNEL MESSAGES ARE RECEIVED. +>>> THE 128-BYTE CACHELINE PERFORMANCE ISSUE IS TIED TO IA64-SN2. * - * XPC_NCHANNELS reflects the total number of channels currently defined. * If the need for additional channels arises, one can simply increase - * XPC_NCHANNELS accordingly. If the day should come where that number - * exceeds the MAXIMUM number of channels allowed (eight), then one will need - * to make changes to the XPC code to allow for this. + * XPC_MAX_NCHANNELS accordingly. If the day should come where that number + * exceeds the absolute MAXIMUM number of channels possible (eight), then one + * will need to make changes to the XPC code to accommodate for this. + * + * The absolute maximum number of channels possible is currently limited to + * eight for performance reasons. The internal cross partition structures + * require sixteen bytes per channel, and eight allows all of this + * interface-shared info to fit in one 128-byte cacheline. */ #define XPC_MEM_CHANNEL 0 /* memory channel number */ #define XPC_NET_CHANNEL 1 /* network channel number */ -#define XPC_NCHANNELS 2 /* #of defined channels */ -#define XPC_MAX_NCHANNELS 8 /* max #of channels allowed */ +#define XPC_MAX_NCHANNELS 2 /* max #of channels allowed */ -#if XPC_NCHANNELS > XPC_MAX_NCHANNELS -#error XPC_NCHANNELS exceeds MAXIMUM allowed. +#if XPC_MAX_NCHANNELS > 8 +#error XPC_MAX_NCHANNELS exceeds absolute MAXIMUM possible. #endif /* @@ -254,7 +262,8 @@ enum xp_retval { xpBteCopyError, /* 52: bte_copy() returned error */ xpSalError, /* 53: sn SAL error */ - xpUnknownReason /* 54: unknown reason - must be last in enum */ + xpUnsupported, /* 54: unsupported functionality or resource */ + xpUnknownReason /* 55: unknown reason - must be last in enum */ }; /* @@ -397,8 +406,16 @@ xpc_partid_to_nasids(short partid, void *nasids) return xpc_interface.partid_to_nasids(partid, nasids); } +extern short xp_max_npartitions; + extern u64 xp_nofault_PIOR_target; extern int xp_nofault_PIOR(void *); extern int xp_error_PIOR(void); +extern struct device *xp; +extern enum xp_retval xp_init_sn2(void); +extern enum xp_retval xp_init_uv(void); +extern void xp_exit_sn2(void); +extern void xp_exit_uv(void); + #endif /* _DRIVERS_MISC_SGIXP_XP_H */ diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c index 196480b691a..c5cec606377 100644 --- a/drivers/misc/sgi-xp/xp_main.c +++ b/drivers/misc/sgi-xp/xp_main.c @@ -15,28 +15,32 @@ */ #include -#include #include -#include -#include -#include +#include #include "xp.h" -/* - * The export of xp_nofault_PIOR needs to happen here since it is defined - * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is - * defined here. - */ -EXPORT_SYMBOL_GPL(xp_nofault_PIOR); +/* define the XP debug device structures to be used with dev_dbg() et al */ -u64 xp_nofault_PIOR_target; -EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target); +struct device_driver xp_dbg_name = { + .name = "xp" +}; + +struct device xp_dbg_subname = { + .bus_id = {0}, /* set to "" */ + .driver = &xp_dbg_name +}; + +struct device *xp = &xp_dbg_subname; + +/* max #of partitions possible */ +short xp_max_npartitions; +EXPORT_SYMBOL_GPL(xp_max_npartitions); /* * xpc_registrations[] keeps track of xpc_connect()'s done by the kernel-level * users of XPC. */ -struct xpc_registration xpc_registrations[XPC_NCHANNELS]; +struct xpc_registration xpc_registrations[XPC_MAX_NCHANNELS]; EXPORT_SYMBOL_GPL(xpc_registrations); /* @@ -135,7 +139,7 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size, { struct xpc_registration *registration; - DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS); + DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS); DBUG_ON(payload_size == 0 || nentries == 0); DBUG_ON(func == NULL); DBUG_ON(assigned_limit == 0 || idle_limit > assigned_limit); @@ -185,7 +189,7 @@ xpc_disconnect(int ch_number) { struct xpc_registration *registration; - DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS); + DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS); registration = &xpc_registrations[ch_number]; @@ -221,39 +225,21 @@ EXPORT_SYMBOL_GPL(xpc_disconnect); int __init xp_init(void) { - int ret, ch_number; - u64 func_addr = *(u64 *)xp_nofault_PIOR; - u64 err_func_addr = *(u64 *)xp_error_PIOR; - - if (!ia64_platform_is("sn2")) - return -ENODEV; + enum xp_retval ret; + int ch_number; - /* - * Register a nofault code region which performs a cross-partition - * PIO read. If the PIO read times out, the MCA handler will consume - * the error and return to a kernel-provided instruction to indicate - * an error. This PIO read exists because it is guaranteed to timeout - * if the destination is down (AMO operations do not timeout on at - * least some CPUs on Shubs <= v1.2, which unfortunately we have to - * work around). - */ - ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr, - 1, 1); - if (ret != 0) { - printk(KERN_ERR "XP: can't register nofault code, error=%d\n", - ret); - } - /* - * Setup the nofault PIO read target. (There is no special reason why - * SH_IPI_ACCESS was selected.) - */ - if (is_shub2()) - xp_nofault_PIOR_target = SH2_IPI_ACCESS0; + if (is_shub()) + ret = xp_init_sn2(); + else if (is_uv()) + ret = xp_init_uv(); else - xp_nofault_PIOR_target = SH1_IPI_ACCESS; + ret = xpUnsupported; + + if (ret != xpSuccess) + return -ENODEV; /* initialize the connection registration mutex */ - for (ch_number = 0; ch_number < XPC_NCHANNELS; ch_number++) + for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) mutex_init(&xpc_registrations[ch_number].mutex); return 0; @@ -264,12 +250,10 @@ module_init(xp_init); void __exit xp_exit(void) { - u64 func_addr = *(u64 *)xp_nofault_PIOR; - u64 err_func_addr = *(u64 *)xp_error_PIOR; - - /* unregister the PIO read nofault code region */ - (void)sn_register_nofault_code(func_addr, err_func_addr, - err_func_addr, 1, 0); + if (is_shub()) + xp_exit_sn2(); + else if (is_uv()) + xp_exit_uv(); } module_exit(xp_exit); diff --git a/drivers/misc/sgi-xp/xp_sn2.c b/drivers/misc/sgi-xp/xp_sn2.c new file mode 100644 index 00000000000..b92579356a6 --- /dev/null +++ b/drivers/misc/sgi-xp/xp_sn2.c @@ -0,0 +1,92 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * Cross Partition (XP) sn2-based functions. + * + * Architecture specific implementation of common functions. + */ + +#include +#include +#include "xp.h" + +/* + * The export of xp_nofault_PIOR needs to happen here since it is defined + * in drivers/misc/sgi-xp/xp_nofault.S. The target of the nofault read is + * defined here. + */ +EXPORT_SYMBOL_GPL(xp_nofault_PIOR); + +u64 xp_nofault_PIOR_target; +EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target); + +/* + * Register a nofault code region which performs a cross-partition PIO read. + * If the PIO read times out, the MCA handler will consume the error and + * return to a kernel-provided instruction to indicate an error. This PIO read + * exists because it is guaranteed to timeout if the destination is down + * (AMO operations do not timeout on at least some CPUs on Shubs <= v1.2, + * which unfortunately we have to work around). + */ +static enum xp_retval +xp_register_nofault_code_sn2(void) +{ + int ret; + u64 func_addr; + u64 err_func_addr; + + func_addr = *(u64 *)xp_nofault_PIOR; + err_func_addr = *(u64 *)xp_error_PIOR; + ret = sn_register_nofault_code(func_addr, err_func_addr, err_func_addr, + 1, 1); + if (ret != 0) { + dev_err(xp, "can't register nofault code, error=%d\n", ret); + return xpSalError; + } + /* + * Setup the nofault PIO read target. (There is no special reason why + * SH_IPI_ACCESS was selected.) + */ + if (is_shub1()) + xp_nofault_PIOR_target = SH1_IPI_ACCESS; + else if (is_shub2()) + xp_nofault_PIOR_target = SH2_IPI_ACCESS0; + + return xpSuccess; +} + +void +xp_unregister_nofault_code_sn2(void) +{ + u64 func_addr = *(u64 *)xp_nofault_PIOR; + u64 err_func_addr = *(u64 *)xp_error_PIOR; + + /* unregister the PIO read nofault code region */ + (void)sn_register_nofault_code(func_addr, err_func_addr, + err_func_addr, 1, 0); +} + +enum xp_retval +xp_init_sn2(void) +{ + BUG_ON(!is_shub()); + + xp_max_npartitions = XP_MAX_NPARTITIONS_SN2; + + return xp_register_nofault_code_sn2(); +} + +void +xp_exit_sn2(void) +{ + BUG_ON(!is_shub()); + + xp_unregister_nofault_code_sn2(); +} + diff --git a/drivers/misc/sgi-xp/xp_uv.c b/drivers/misc/sgi-xp/xp_uv.c new file mode 100644 index 00000000000..30888be2cdb --- /dev/null +++ b/drivers/misc/sgi-xp/xp_uv.c @@ -0,0 +1,30 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * Cross Partition (XP) uv-based functions. + * + * Architecture specific implementation of common functions. + * + */ + +#include "xp.h" + +enum xp_retval +xp_init_uv(void) +{ + BUG_ON(!is_uv()); + + xp_max_npartitions = XP_MAX_NPARTITIONS_UV; +} + +void +xp_exit_uv(void) +{ + BUG_ON(!is_uv()); +} diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 11ac267ed68..0f2affd01df 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -210,7 +210,7 @@ xpc_disallow_hb(short partid, struct xpc_vars *vars) * the XPC running on the remote partition). */ #define XPC_NOTIFY_IRQ_AMOS 0 -#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS) +#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_NPARTITIONS_SN2) #define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS) #define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1) @@ -285,7 +285,7 @@ struct xpc_gp { }; #define XPC_GP_SIZE \ - L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_NCHANNELS) + L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_MAX_NCHANNELS) /* * Define a structure that contains arguments associated with opening and @@ -300,7 +300,8 @@ struct xpc_openclose_args { }; #define XPC_OPENCLOSE_ARGS_SIZE \ - L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * XPC_NCHANNELS) + L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * \ + XPC_MAX_NCHANNELS) /* struct xpc_msg flags */ @@ -637,7 +638,7 @@ extern int xpc_exiting; extern struct xpc_vars *xpc_vars; extern struct xpc_rsvd_page *xpc_rsvd_page; extern struct xpc_vars_part *xpc_vars_part; -extern struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1]; +extern struct xpc_partition *xpc_partitions; extern char *xpc_remote_copy_buffer; extern void *xpc_remote_copy_buffer_base; extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **); @@ -1104,13 +1105,14 @@ xpc_IPI_send_local_msgrequest(struct xpc_channel *ch) } /* +>>> this block comment needs to be moved and re-written. * Memory for XPC's AMO variables is allocated by the MSPEC driver. These * pages are located in the lowest granule. The lowest granule uses 4k pages * for cached references and an alternate TLB handler to never provide a * cacheable mapping for the entire region. This will prevent speculative * reading of cached copies of our lines from being issued which will cause * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 - * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an + * AMO variables (based on xp_max_npartitions) for message notification and an * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition * activation and 2 AMO variables for partition deactivation. */ diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 9c90c2d55c0..12d8eb6957a 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -110,14 +110,14 @@ xpc_setup_infrastructure(struct xpc_partition *part) * Allocate all of the channel structures as a contiguous chunk of * memory. */ - part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_NCHANNELS, + part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS, GFP_KERNEL); if (part->channels == NULL) { dev_err(xpc_chan, "can't get memory for channels\n"); return xpNoMemory; } - part->nchannels = XPC_NCHANNELS; + part->nchannels = XPC_MAX_NCHANNELS; /* allocate all the required GET/PUT values */ @@ -1432,9 +1432,9 @@ xpc_initiate_connect(int ch_number) struct xpc_partition *part; struct xpc_channel *ch; - DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS); + DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS); - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + for (partid = 0; partid < xp_max_npartitions; partid++) { part = &xpc_partitions[partid]; if (xpc_part_ref(part)) { @@ -1488,10 +1488,10 @@ xpc_initiate_disconnect(int ch_number) struct xpc_partition *part; struct xpc_channel *ch; - DBUG_ON(ch_number < 0 || ch_number >= XPC_NCHANNELS); + DBUG_ON(ch_number < 0 || ch_number >= XPC_MAX_NCHANNELS); /* initiate the channel disconnect for every active partition */ - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + for (partid = 0; partid < xp_max_npartitions; partid++) { part = &xpc_partitions[partid]; if (xpc_part_ref(part)) { @@ -1734,7 +1734,7 @@ xpc_initiate_allocate(short partid, int ch_number, u32 flags, void **payload) enum xp_retval ret = xpUnknownReason; struct xpc_msg *msg = NULL; - DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(partid < 0 || partid >= xp_max_npartitions); DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); *payload = NULL; @@ -1918,7 +1918,7 @@ xpc_initiate_send(short partid, int ch_number, void *payload) dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg, partid, ch_number); - DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(partid < 0 || partid >= xp_max_npartitions); DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); DBUG_ON(msg == NULL); @@ -1968,7 +1968,7 @@ xpc_initiate_send_notify(short partid, int ch_number, void *payload, dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg, partid, ch_number); - DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(partid < 0 || partid >= xp_max_npartitions); DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); DBUG_ON(msg == NULL); DBUG_ON(func == NULL); @@ -2210,7 +2210,7 @@ xpc_initiate_received(short partid, int ch_number, void *payload) struct xpc_msg *msg = XPC_MSG_ADDRESS(payload); s64 get, msg_number = msg->number; - DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(partid < 0 || partid >= xp_max_npartitions); DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); ch = &part->channels[ch_number]; diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index c3b4227f48a..a05c7c7da22 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -433,7 +433,7 @@ xpc_activating(void *__partid) struct xpc_partition *part = &xpc_partitions[partid]; unsigned long irq_flags; - DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(partid < 0 || partid >= xp_max_npartitions); spin_lock_irqsave(&part->act_lock, irq_flags); @@ -544,7 +544,7 @@ xpc_notify_IRQ_handler(int irq, void *dev_id) short partid = (short)(u64)dev_id; struct xpc_partition *part = &xpc_partitions[partid]; - DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(partid < 0 || partid >= xp_max_npartitions); if (xpc_part_ref(part)) { xpc_check_for_channel_activity(part); @@ -815,7 +815,7 @@ xpc_disconnect_wait(int ch_number) int wakeup_channel_mgr; /* now wait for all callouts to the caller's function to cease */ - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + for (partid = 0; partid < xp_max_npartitions; partid++) { part = &xpc_partitions[partid]; if (!xpc_part_ref(part)) @@ -895,7 +895,7 @@ xpc_do_exit(enum xp_retval reason) do { active_part_count = 0; - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + for (partid = 0; partid < xp_max_npartitions; partid++) { part = &xpc_partitions[partid]; if (xpc_partition_disengaged(part) && @@ -956,11 +956,8 @@ xpc_do_exit(enum xp_retval reason) DBUG_ON(xpc_vars->heartbeating_to_mask != 0); if (reason == xpUnloading) { - /* take ourselves off of the reboot_notifier_list */ - (void)unregister_reboot_notifier(&xpc_reboot_notifier); - - /* take ourselves off of the die_notifier list */ (void)unregister_die_notifier(&xpc_die_notifier); + (void)unregister_reboot_notifier(&xpc_reboot_notifier); } /* close down protections for IPI operations */ @@ -972,6 +969,7 @@ xpc_do_exit(enum xp_retval reason) if (xpc_sysctl) unregister_sysctl_table(xpc_sysctl); + kfree(xpc_partitions); kfree(xpc_remote_copy_buffer_base); } @@ -1017,7 +1015,7 @@ xpc_die_disengage(void) xpc_vars->heartbeating_to_mask = 0; /* indicate we're deactivated */ - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + for (partid = 0; partid < xp_max_npartitions; partid++) { part = &xpc_partitions[partid]; if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part-> @@ -1053,7 +1051,8 @@ xpc_die_disengage(void) time = rtc_time(); if (time >= disengage_request_timeout) { - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + for (partid = 0; partid < xp_max_npartitions; + partid++) { if (engaged & (1UL << partid)) { dev_info(xpc_part, "disengage from " "remote partition %d timed " @@ -1132,18 +1131,26 @@ xpc_init(void) if (!ia64_platform_is("sn2")) return -ENODEV; + snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part"); + snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan"); + buf_size = max(XPC_RP_VARS_SIZE, XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES); xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size, GFP_KERNEL, &xpc_remote_copy_buffer_base); - if (xpc_remote_copy_buffer == NULL) + if (xpc_remote_copy_buffer == NULL) { + dev_err(xpc_part, "can't get memory for remote copy buffer\n"); return -ENOMEM; + } - snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part"); - snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan"); - - xpc_sysctl = register_sysctl_table(xpc_sys_dir); + xpc_partitions = kzalloc(sizeof(struct xpc_partition) * + xp_max_npartitions, GFP_KERNEL); + if (xpc_partitions == NULL) { + dev_err(xpc_part, "can't get memory for partition structure\n"); + ret = -ENOMEM; + goto out_1; + } /* * The first few fields of each entry of xpc_partitions[] need to @@ -1153,7 +1160,7 @@ xpc_init(void) * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING * PARTITION HAS BEEN ACTIVATED. */ - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + for (partid = 0; partid < xp_max_npartitions; partid++) { part = &xpc_partitions[partid]; DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part)); @@ -1173,6 +1180,8 @@ xpc_init(void) atomic_set(&part->references, 0); } + xpc_sysctl = register_sysctl_table(xpc_sys_dir); + /* * Open up protections for IPI operations (and AMO operations on * Shub 1.1 systems). @@ -1196,14 +1205,8 @@ xpc_init(void) if (ret != 0) { dev_err(xpc_part, "can't register ACTIVATE IRQ handler, " "errno=%d\n", -ret); - - xpc_restrict_IPI_ops(); - - if (xpc_sysctl) - unregister_sysctl_table(xpc_sysctl); - - kfree(xpc_remote_copy_buffer_base); - return -EBUSY; + ret = -EBUSY; + goto out_2; } /* @@ -1213,16 +1216,9 @@ xpc_init(void) */ xpc_rsvd_page = xpc_rsvd_page_init(); if (xpc_rsvd_page == NULL) { - dev_err(xpc_part, "could not setup our reserved page\n"); - - free_irq(SGI_XPC_ACTIVATE, NULL); - xpc_restrict_IPI_ops(); - - if (xpc_sysctl) - unregister_sysctl_table(xpc_sysctl); - - kfree(xpc_remote_copy_buffer_base); - return -EBUSY; + dev_err(xpc_part, "can't setup our reserved page\n"); + ret = -EBUSY; + goto out_3; } /* add ourselves to the reboot_notifier_list */ @@ -1245,25 +1241,8 @@ xpc_init(void) kthread = kthread_run(xpc_hb_checker, NULL, XPC_HB_CHECK_THREAD_NAME); if (IS_ERR(kthread)) { dev_err(xpc_part, "failed while forking hb check thread\n"); - - /* indicate to others that our reserved page is uninitialized */ - xpc_rsvd_page->vars_pa = 0; - - /* take ourselves off of the reboot_notifier_list */ - (void)unregister_reboot_notifier(&xpc_reboot_notifier); - - /* take ourselves off of the die_notifier list */ - (void)unregister_die_notifier(&xpc_die_notifier); - - del_timer_sync(&xpc_hb_timer); - free_irq(SGI_XPC_ACTIVATE, NULL); - xpc_restrict_IPI_ops(); - - if (xpc_sysctl) - unregister_sysctl_table(xpc_sysctl); - - kfree(xpc_remote_copy_buffer_base); - return -EBUSY; + ret = -EBUSY; + goto out_4; } /* @@ -1290,6 +1269,24 @@ xpc_init(void) xpc_initiate_partid_to_nasids); return 0; + + /* initialization was not successful */ +out_4: + /* indicate to others that our reserved page is uninitialized */ + xpc_rsvd_page->vars_pa = 0; + del_timer_sync(&xpc_hb_timer); + (void)unregister_die_notifier(&xpc_die_notifier); + (void)unregister_reboot_notifier(&xpc_reboot_notifier); +out_3: + free_irq(SGI_XPC_ACTIVATE, NULL); +out_2: + xpc_restrict_IPI_ops(); + if (xpc_sysctl) + unregister_sysctl_table(xpc_sysctl); + kfree(xpc_partitions); +out_1: + kfree(xpc_remote_copy_buffer_base); + return ret; } module_init(xpc_init); diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index 7dd4b5812c4..02a858eddd8 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -51,13 +51,7 @@ struct xpc_vars_part *xpc_vars_part; static int xp_nasid_mask_bytes; /* actual size in bytes of nasid mask */ static int xp_nasid_mask_words; /* actual size in words of nasid mask */ -/* - * For performance reasons, each entry of xpc_partitions[] is cacheline - * aligned. And xpc_partitions[] is padded with an additional entry at the - * end so that the last legitimate entry doesn't share its cacheline with - * another variable. - */ -struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1]; +struct xpc_partition *xpc_partitions; /* * Generic buffer used to store a local copy of portions of a remote @@ -261,7 +255,7 @@ xpc_rsvd_page_init(void) /* clear xpc_vars_part */ memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part) * - XP_MAX_PARTITIONS); + xp_max_npartitions); /* initialize the activate IRQ related AMO variables */ for (i = 0; i < xp_nasid_mask_words; i++) @@ -408,7 +402,7 @@ xpc_check_remote_hb(void) remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer; - for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) { + for (partid = 0; partid < xp_max_npartitions; partid++) { if (xpc_exiting) break; @@ -487,10 +481,8 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, /* check that the partid is for another partition */ - if (remote_rp->partid < 1 || - remote_rp->partid > (XP_MAX_PARTITIONS - 1)) { + if (remote_rp->partid < 0 || remote_rp->partid >= xp_max_npartitions) return xpInvalidPartid; - } if (remote_rp->partid == sn_partition_id) return xpLocalPartid; diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index 822dc8e8d7f..cc252f201b2 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -287,7 +287,7 @@ xpnet_connection_activity(enum xp_retval reason, short partid, int channel, { long bp; - DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS); + DBUG_ON(partid < 0 || partid >= xp_max_npartitions); DBUG_ON(channel != XPC_NET_CHANNEL); switch (reason) { @@ -513,7 +513,7 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) /* * Main send loop. */ - for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS; + for (dest_partid = 0; dp && dest_partid < xp_max_npartitions; dest_partid++) { if (!(dp & (1UL << (dest_partid - 1)))) { -- GitLab From 908787db9b95f548270af18d83d62b9d2020ca10 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:05 -0700 Subject: [PATCH 0393/1024] sgi-xp: create a common xp_remote_memcpy() function Create a common remote memcpy function that maps to what the hardware booted supports. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xp.h | 43 ++-------------------- drivers/misc/sgi-xp/xp_main.c | 3 ++ drivers/misc/sgi-xp/xp_sn2.c | 46 ++++++++++++++++++++++++ drivers/misc/sgi-xp/xp_uv.c | 11 ++++++ drivers/misc/sgi-xp/xpc.h | 7 ---- drivers/misc/sgi-xp/xpc_channel.c | 20 +++++------ drivers/misc/sgi-xp/xpc_partition.c | 55 +++++++++++++---------------- drivers/misc/sgi-xp/xpnet.c | 28 +++++++-------- 8 files changed, 107 insertions(+), 106 deletions(-) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 51087e11188..c42196a1a6b 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -17,7 +17,6 @@ #include #include #include -#include #ifdef CONFIG_IA64 #include #endif @@ -71,46 +70,6 @@ #define XP_NASID_MASK_BYTES ((XP_MAX_PHYSNODE_ID + 7) / 8) #define XP_NASID_MASK_WORDS ((XP_MAX_PHYSNODE_ID + 63) / 64) -/* - * Wrapper for bte_copy() that should it return a failure status will retry - * the bte_copy() once in the hope that the failure was due to a temporary - * aberration (i.e., the link going down temporarily). - * - * src - physical address of the source of the transfer. - * vdst - virtual address of the destination of the transfer. - * len - number of bytes to transfer from source to destination. - * mode - see bte_copy() for definition. - * notification - see bte_copy() for definition. - * - * Note: xp_bte_copy() should never be called while holding a spinlock. - */ -static inline bte_result_t -xp_bte_copy(u64 src, u64 vdst, u64 len, u64 mode, void *notification) -{ - bte_result_t ret; - u64 pdst = ia64_tpa(vdst); - - /* - * Ensure that the physically mapped memory is contiguous. - * - * We do this by ensuring that the memory is from region 7 only. - * If the need should arise to use memory from one of the other - * regions, then modify the BUG_ON() statement to ensure that the - * memory from that region is always physically contiguous. - */ - BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL); - - ret = bte_copy(src, pdst, len, mode, notification); - if ((ret != BTE_SUCCESS) && BTE_ERROR_RETRY(ret)) { - if (!in_interrupt()) - cond_resched(); - - ret = bte_copy(src, pdst, len, mode, notification); - } - - return ret; -} - /* * XPC establishes channel connections between the local partition and any * other partition that is currently up. Over these channels, kernel-level @@ -408,6 +367,8 @@ xpc_partid_to_nasids(short partid, void *nasids) extern short xp_max_npartitions; +extern enum xp_retval (*xp_remote_memcpy) (void *, const void *, size_t); + extern u64 xp_nofault_PIOR_target; extern int xp_nofault_PIOR(void *); extern int xp_error_PIOR(void); diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c index c5cec606377..6f25613b27e 100644 --- a/drivers/misc/sgi-xp/xp_main.c +++ b/drivers/misc/sgi-xp/xp_main.c @@ -36,6 +36,9 @@ struct device *xp = &xp_dbg_subname; short xp_max_npartitions; EXPORT_SYMBOL_GPL(xp_max_npartitions); +enum xp_retval (*xp_remote_memcpy) (void *dst, const void *src, size_t len); +EXPORT_SYMBOL_GPL(xp_remote_memcpy); + /* * xpc_registrations[] keeps track of xpc_connect()'s done by the kernel-level * users of XPC. diff --git a/drivers/misc/sgi-xp/xp_sn2.c b/drivers/misc/sgi-xp/xp_sn2.c index b92579356a6..3d553fa73f4 100644 --- a/drivers/misc/sgi-xp/xp_sn2.c +++ b/drivers/misc/sgi-xp/xp_sn2.c @@ -13,6 +13,7 @@ */ #include +#include #include #include "xp.h" @@ -72,6 +73,49 @@ xp_unregister_nofault_code_sn2(void) err_func_addr, 1, 0); } +/* + * Wrapper for bte_copy(). + * + * vdst - virtual address of the destination of the transfer. + * psrc - physical address of the source of the transfer. + * len - number of bytes to transfer from source to destination. + * + * Note: xp_remote_memcpy_sn2() should never be called while holding a spinlock. + */ +static enum xp_retval +xp_remote_memcpy_sn2(void *vdst, const void *psrc, size_t len) +{ + bte_result_t ret; + u64 pdst = ia64_tpa(vdst); + /* >>> What are the rules governing the src and dst addresses passed in? + * >>> Currently we're assuming that dst is a virtual address and src + * >>> is a physical address, is this appropriate? Can we allow them to + * >>> be whatever and we make the change here without damaging the + * >>> addresses? + */ + + /* + * Ensure that the physically mapped memory is contiguous. + * + * We do this by ensuring that the memory is from region 7 only. + * If the need should arise to use memory from one of the other + * regions, then modify the BUG_ON() statement to ensure that the + * memory from that region is always physically contiguous. + */ + BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL); + + ret = bte_copy((u64)psrc, pdst, len, (BTE_NOTIFY | BTE_WACQUIRE), NULL); + if (ret == BTE_SUCCESS) + return xpSuccess; + + if (is_shub2()) + dev_err(xp, "bte_copy() on shub2 failed, error=0x%x\n", ret); + else + dev_err(xp, "bte_copy() failed, error=%d\n", ret); + + return xpBteCopyError; +} + enum xp_retval xp_init_sn2(void) { @@ -79,6 +123,8 @@ xp_init_sn2(void) xp_max_npartitions = XP_MAX_NPARTITIONS_SN2; + xp_remote_memcpy = xp_remote_memcpy_sn2; + return xp_register_nofault_code_sn2(); } diff --git a/drivers/misc/sgi-xp/xp_uv.c b/drivers/misc/sgi-xp/xp_uv.c index 30888be2cdb..dca519fdef9 100644 --- a/drivers/misc/sgi-xp/xp_uv.c +++ b/drivers/misc/sgi-xp/xp_uv.c @@ -15,12 +15,23 @@ #include "xp.h" +static enum xp_retval +xp_remote_memcpy_uv(void *vdst, const void *psrc, size_t len) +{ + /* >>> this function needs fleshing out */ + return xpUnsupported; +} + enum xp_retval xp_init_uv(void) { BUG_ON(!is_uv()); xp_max_npartitions = XP_MAX_NPARTITIONS_UV; + + xp_remote_memcpy = xp_remote_memcpy_uv; + + return xpSuccess; } void diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 0f2affd01df..60388bed770 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -1125,12 +1124,6 @@ xpc_IPI_init(int index) return amo; } -static inline enum xp_retval -xpc_map_bte_errors(bte_result_t error) -{ - return ((error == BTE_SUCCESS) ? xpSuccess : xpBteCopyError); -} - /* * Check to see if there is any channel activity to/from the specified * partition. diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 12d8eb6957a..9e79ad7eafe 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include "xpc.h" @@ -252,13 +251,13 @@ xpc_setup_infrastructure(struct xpc_partition *part) * * src must be a cacheline aligned physical address on the remote partition. * dst must be a cacheline aligned virtual address on this partition. - * cnt must be an cacheline sized + * cnt must be cacheline sized */ static enum xp_retval xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst, const void *src, size_t cnt) { - bte_result_t bte_ret; + enum xp_retval ret; DBUG_ON((u64)src != L1_CACHE_ALIGN((u64)src)); DBUG_ON((u64)dst != L1_CACHE_ALIGN((u64)dst)); @@ -267,15 +266,12 @@ xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst, if (part->act_state == XPC_P_DEACTIVATING) return part->reason; - bte_ret = xp_bte_copy((u64)src, (u64)dst, (u64)cnt, - (BTE_NORMAL | BTE_WACQUIRE), NULL); - if (bte_ret == BTE_SUCCESS) - return xpSuccess; - - dev_dbg(xpc_chan, "xp_bte_copy() from partition %d failed, ret=%d\n", - XPC_PARTID(part), bte_ret); - - return xpc_map_bte_errors(bte_ret); + ret = xp_remote_memcpy(dst, src, cnt); + if (ret != xpSuccess) { + dev_dbg(xpc_chan, "xp_remote_memcpy() from partition %d failed," + " ret=%d\n", XPC_PARTID(part), ret); + } + return ret; } /* diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index 02a858eddd8..6c82f205097 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include @@ -92,7 +91,7 @@ xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) static u64 xpc_get_rsvd_page_pa(int nasid) { - bte_result_t bte_res; + enum xp_retval ret; s64 status; u64 cookie = 0; u64 rp_pa = nasid; /* seed with nasid */ @@ -113,6 +112,7 @@ xpc_get_rsvd_page_pa(int nasid) if (status != SALRET_MORE_PASSES) break; + /* >>> L1_CACHE_ALIGN() is only a sn2-bte_copy requirement */ if (L1_CACHE_ALIGN(len) > buf_len) { kfree(buf_base); buf_len = L1_CACHE_ALIGN(len); @@ -127,10 +127,9 @@ xpc_get_rsvd_page_pa(int nasid) } } - bte_res = xp_bte_copy(rp_pa, buf, buf_len, - (BTE_NOTIFY | BTE_WACQUIRE), NULL); - if (bte_res != BTE_SUCCESS) { - dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res); + ret = xp_remote_memcpy((void *)buf, (void *)rp_pa, buf_len); + if (ret != xpSuccess) { + dev_dbg(xpc_part, "xp_remote_memcpy failed %d\n", ret); status = SALRET_ERROR; break; } @@ -398,7 +397,7 @@ xpc_check_remote_hb(void) struct xpc_vars *remote_vars; struct xpc_partition *part; short partid; - bte_result_t bres; + enum xp_retval ret; remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer; @@ -418,13 +417,11 @@ xpc_check_remote_hb(void) } /* pull the remote_hb cache line */ - bres = xp_bte_copy(part->remote_vars_pa, - (u64)remote_vars, - XPC_RP_VARS_SIZE, - (BTE_NOTIFY | BTE_WACQUIRE), NULL); - if (bres != BTE_SUCCESS) { - XPC_DEACTIVATE_PARTITION(part, - xpc_map_bte_errors(bres)); + ret = xp_remote_memcpy(remote_vars, + (void *)part->remote_vars_pa, + XPC_RP_VARS_SIZE); + if (ret != xpSuccess) { + XPC_DEACTIVATE_PARTITION(part, ret); continue; } @@ -457,7 +454,8 @@ static enum xp_retval xpc_get_remote_rp(int nasid, u64 *discovered_nasids, struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa) { - int bres, i; + int i; + enum xp_retval ret; /* get the reserved page's physical address */ @@ -466,11 +464,10 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, return xpNoRsvdPageAddr; /* pull over the reserved page header and part_nasids mask */ - bres = xp_bte_copy(*remote_rp_pa, (u64)remote_rp, - XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes, - (BTE_NOTIFY | BTE_WACQUIRE), NULL); - if (bres != BTE_SUCCESS) - return xpc_map_bte_errors(bres); + ret = xp_remote_memcpy(remote_rp, (void *)*remote_rp_pa, + XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes); + if (ret != xpSuccess) + return ret; if (discovered_nasids != NULL) { u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp); @@ -504,16 +501,16 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, static enum xp_retval xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars) { - int bres; + enum xp_retval ret; if (remote_vars_pa == 0) return xpVarsNotSet; /* pull over the cross partition variables */ - bres = xp_bte_copy(remote_vars_pa, (u64)remote_vars, XPC_RP_VARS_SIZE, - (BTE_NOTIFY | BTE_WACQUIRE), NULL); - if (bres != BTE_SUCCESS) - return xpc_map_bte_errors(bres); + ret = xp_remote_memcpy(remote_vars, (void *)remote_vars_pa, + XPC_RP_VARS_SIZE); + if (ret != xpSuccess) + return ret; if (XPC_VERSION_MAJOR(remote_vars->version) != XPC_VERSION_MAJOR(XPC_V_VERSION)) { @@ -1148,7 +1145,6 @@ xpc_initiate_partid_to_nasids(short partid, void *nasid_mask) { struct xpc_partition *part; u64 part_nasid_pa; - int bte_res; part = &xpc_partitions[partid]; if (part->remote_rp_pa == 0) @@ -1158,9 +1154,6 @@ xpc_initiate_partid_to_nasids(short partid, void *nasid_mask) part_nasid_pa = (u64)XPC_RP_PART_NASIDS(part->remote_rp_pa); - bte_res = xp_bte_copy(part_nasid_pa, (u64)nasid_mask, - xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), - NULL); - - return xpc_map_bte_errors(bte_res); + return xp_remote_memcpy(nasid_mask, (void *)part_nasid_pa, + xp_nasid_mask_bytes); } diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index cc252f201b2..9c540eb1847 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #include @@ -169,7 +168,7 @@ static void xpnet_receive(short partid, int channel, struct xpnet_message *msg) { struct sk_buff *skb; - bte_result_t bret; + enum xp_retval ret; struct xpnet_dev_private *priv = (struct xpnet_dev_private *)xpnet_device->priv; @@ -201,7 +200,7 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg) /* * The allocated skb has some reserved space. - * In order to use bte_copy, we need to get the + * In order to use xp_remote_memcpy(), we need to get the * skb->data pointer moved forward. */ skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data & @@ -227,25 +226,24 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg) (size_t)msg->embedded_bytes); } else { dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t" - "bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa, - (void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), - msg->size); + "xp_remote_memcpy(0x%p, 0x%p, %hu)\n", (void *) + ((u64)skb->data & ~(L1_CACHE_BYTES - 1)), + (void *)msg->buf_pa, msg->size); - bret = bte_copy(msg->buf_pa, - __pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)), - msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL); + ret = xp_remote_memcpy((void *)((u64)skb->data & + ~(L1_CACHE_BYTES - 1)), + (void *)msg->buf_pa, msg->size); - if (bret != BTE_SUCCESS) { + if (ret != xpSuccess) { /* * >>> Need better way of cleaning skb. Currently skb * >>> appears in_use and we can't just call * >>> dev_kfree_skb. */ - dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned " - "error=0x%x\n", (void *)msg->buf_pa, - (void *)__pa((u64)skb->data & - ~(L1_CACHE_BYTES - 1)), - msg->size, bret); + dev_err(xpnet, "xp_remote_memcpy(0x%p, 0x%p, 0x%hx) " + "returned error=0x%x\n", (void *) + ((u64)skb->data & ~(L1_CACHE_BYTES - 1)), + (void *)msg->buf_pa, msg->size, ret); xpc_received(partid, channel, (void *)msg); -- GitLab From 94bd2708d4a95d7da5a1c7c28a063eccd127fb69 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:05 -0700 Subject: [PATCH 0394/1024] sgi-xp: prepare xpc_rsvd_page to work on either sn2 or uv hardware Prepare XPC's reserved page header to work for either sn2 or uv. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/Makefile | 3 +- drivers/misc/sgi-xp/xp.h | 5 +- drivers/misc/sgi-xp/xpc.h | 57 +++++++---- drivers/misc/sgi-xp/xpc_main.c | 27 ++++- drivers/misc/sgi-xp/xpc_partition.c | 149 ++++++++-------------------- drivers/misc/sgi-xp/xpc_sn2.c | 111 +++++++++++++++++++++ drivers/misc/sgi-xp/xpc_uv.c | 48 +++++++++ 7 files changed, 267 insertions(+), 133 deletions(-) create mode 100644 drivers/misc/sgi-xp/xpc_sn2.c create mode 100644 drivers/misc/sgi-xp/xpc_uv.c diff --git a/drivers/misc/sgi-xp/Makefile b/drivers/misc/sgi-xp/Makefile index b50f2921781..b3eeff31ebf 100644 --- a/drivers/misc/sgi-xp/Makefile +++ b/drivers/misc/sgi-xp/Makefile @@ -7,6 +7,7 @@ xp-y := xp_main.o xp_uv.o xp-$(CONFIG_IA64) += xp_sn2.o xp_nofault.o obj-$(CONFIG_SGI_XP) += xpc.o -xpc-y := xpc_main.o xpc_channel.o xpc_partition.o +xpc-y := xpc_main.o xpc_uv.o xpc_channel.o xpc_partition.o +xpc-$(CONFIG_IA64) += xpc_sn2.o obj-$(CONFIG_SGI_XP) += xpnet.o diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index c42196a1a6b..0f75592896d 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -220,9 +220,10 @@ enum xp_retval { xpBteCopyError, /* 52: bte_copy() returned error */ xpSalError, /* 53: sn SAL error */ + xpRsvdPageNotSet, /* 54: the reserved page is not set up */ - xpUnsupported, /* 54: unsupported functionality or resource */ - xpUnknownReason /* 55: unknown reason - must be last in enum */ + xpUnsupported, /* 55: unsupported functionality or resource */ + xpUnknownReason /* 56: unknown reason - must be last in enum */ }; /* diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 60388bed770..94b52bb8151 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -71,11 +71,11 @@ * * reserved page header * - * The first cacheline of the reserved page contains the header - * (struct xpc_rsvd_page). Before SAL initialization has completed, + * The first two 64-byte cachelines of the reserved page contain the + * header (struct xpc_rsvd_page). Before SAL initialization has completed, * SAL has set up the following fields of the reserved page header: - * SAL_signature, SAL_version, partid, and nasids_size. The other - * fields are set up by XPC. (xpc_rsvd_page points to the local + * SAL_signature, SAL_version, SAL_partid, and SAL_nasids_size. The + * other fields are set up by XPC. (xpc_rsvd_page points to the local * partition's reserved page.) * * part_nasids mask @@ -89,11 +89,11 @@ * nasids. The part_nasids mask is located starting at the first cacheline * following the reserved page header. The mach_nasids mask follows right * after the part_nasids mask. The size in bytes of each mask is reflected - * by the reserved page header field 'nasids_size'. (Local partition's + * by the reserved page header field 'SAL_nasids_size'. (Local partition's * mask pointers are xpc_part_nasids and xpc_mach_nasids.) * - * vars - * vars part + * vars (ia64-sn2 only) + * vars part (ia64-sn2 only) * * Immediately following the mach_nasids mask are the XPC variables * required by other partitions. First are those that are generic to all @@ -101,25 +101,31 @@ * which are partition specific (vars part). These are setup by XPC. * (Local partition's vars pointers are xpc_vars and xpc_vars_part.) * - * Note: Until vars_pa is set, the partition XPC code has not been initialized. + * Note: Until 'stamp' is set non-zero, the partition XPC code has not been + * initialized. */ struct xpc_rsvd_page { u64 SAL_signature; /* SAL: unique signature */ u64 SAL_version; /* SAL: version */ - u8 partid; /* SAL: partition ID */ + short SAL_partid; /* SAL: partition ID */ + short max_npartitions; /* value of XPC_MAX_PARTITIONS */ u8 version; - u8 pad1[6]; /* align to next u64 in cacheline */ - u64 vars_pa; /* physical address of struct xpc_vars */ + u8 pad1[3]; /* align to next u64 in 1st 64-byte cacheline */ + union { + u64 vars_pa; /* physical address of struct xpc_vars */ + u64 activate_mq_gpa; /* global phys address of activate_mq */ + } sn; struct timespec stamp; /* time when reserved page was setup by XPC */ - u64 pad2[9]; /* align to last u64 in cacheline */ - u64 nasids_size; /* SAL: size of each nasid mask in bytes */ + u64 pad2[9]; /* align to last u64 in 2nd 64-byte cacheline */ + u64 SAL_nasids_size; /* SAL: size of each nasid mask in bytes */ }; -#define XPC_RP_VERSION _XPC_VERSION(1, 1) /* version 1.1 of the reserved page */ +#define XPC_RP_VERSION _XPC_VERSION(2, 0) /* version 2.0 of the reserved page */ #define XPC_SUPPORTS_RP_STAMP(_version) \ (_version >= _XPC_VERSION(1, 1)) +#define ZERO_STAMP ((struct timespec){0, 0}) /* * compare stamps - the return value is: * @@ -218,10 +224,10 @@ xpc_disallow_hb(short partid, struct xpc_vars *vars) * * An array of these structures, one per partition, will be defined. As a * partition becomes active XPC will copy the array entry corresponding to - * itself from that partition. It is desirable that the size of this - * structure evenly divide into a cacheline, such that none of the entries - * in this array crosses a cacheline boundary. As it is now, each entry - * occupies half a cacheline. + * itself from that partition. It is desirable that the size of this structure + * evenly divides into a 128-byte cacheline, such that none of the entries in + * this array crosses a 128-byte cacheline boundary. As it is now, each entry + * occupies a 64-byte cacheline. */ struct xpc_vars_part { u64 magic; @@ -632,16 +638,25 @@ extern void xpc_activate_kthreads(struct xpc_channel *, int); extern void xpc_create_kthreads(struct xpc_channel *, int, int); extern void xpc_disconnect_wait(int); +extern enum xp_retval (*xpc_rsvd_page_init) (struct xpc_rsvd_page *); + +/* found in xpc_sn2.c */ +extern void xpc_init_sn2(void); +extern struct xpc_vars *xpc_vars; /*>>> eliminate from here */ +extern struct xpc_vars_part *xpc_vars_part; /*>>> eliminate from here */ + +/* found in xpc_uv.c */ +extern void xpc_init_uv(void); + /* found in xpc_partition.c */ extern int xpc_exiting; -extern struct xpc_vars *xpc_vars; +extern int xp_nasid_mask_words; extern struct xpc_rsvd_page *xpc_rsvd_page; -extern struct xpc_vars_part *xpc_vars_part; extern struct xpc_partition *xpc_partitions; extern char *xpc_remote_copy_buffer; extern void *xpc_remote_copy_buffer_base; extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **); -extern struct xpc_rsvd_page *xpc_rsvd_page_init(void); +extern struct xpc_rsvd_page *xpc_setup_rsvd_page(void); extern void xpc_allow_IPI_ops(void); extern void xpc_restrict_IPI_ops(void); extern int xpc_identify_act_IRQ_sender(void); diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index a05c7c7da22..2180f1f7e08 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -175,6 +175,8 @@ static struct notifier_block xpc_die_notifier = { .notifier_call = xpc_system_die, }; +enum xp_retval (*xpc_rsvd_page_init) (struct xpc_rsvd_page *rp); + /* * Timer function to enforce the timelimit on the partition disengage request. */ @@ -949,7 +951,7 @@ xpc_do_exit(enum xp_retval reason) DBUG_ON(xpc_partition_engaged(-1UL)); /* indicate to others that our reserved page is uninitialized */ - xpc_rsvd_page->vars_pa = 0; + xpc_rsvd_page->stamp = ZERO_STAMP; /* now it's time to eliminate our heartbeat */ del_timer_sync(&xpc_hb_timer); @@ -1128,8 +1130,24 @@ xpc_init(void) struct task_struct *kthread; size_t buf_size; - if (!ia64_platform_is("sn2")) + if (is_shub()) { + /* + * The ia64-sn2 architecture supports at most 64 partitions. + * And the inability to unregister remote AMOs restricts us + * further to only support exactly 64 partitions on this + * architecture, no less. + */ + if (xp_max_npartitions != 64) + return -EINVAL; + + xpc_init_sn2(); + + } else if (is_uv()) { + xpc_init_uv(); + + } else { return -ENODEV; + } snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part"); snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan"); @@ -1214,7 +1232,7 @@ xpc_init(void) * other partitions to discover we are alive and establish initial * communications. */ - xpc_rsvd_page = xpc_rsvd_page_init(); + xpc_rsvd_page = xpc_setup_rsvd_page(); if (xpc_rsvd_page == NULL) { dev_err(xpc_part, "can't setup our reserved page\n"); ret = -EBUSY; @@ -1273,7 +1291,8 @@ xpc_init(void) /* initialization was not successful */ out_4: /* indicate to others that our reserved page is uninitialized */ - xpc_rsvd_page->vars_pa = 0; + xpc_rsvd_page->stamp = ZERO_STAMP; + del_timer_sync(&xpc_hb_timer); (void)unregister_die_notifier(&xpc_die_notifier); (void)unregister_reboot_notifier(&xpc_reboot_notifier); diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index 6c82f205097..1db84cb4914 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -44,11 +43,10 @@ u64 xpc_prot_vec[MAX_NUMNODES]; struct xpc_rsvd_page *xpc_rsvd_page; static u64 *xpc_part_nasids; static u64 *xpc_mach_nasids; -struct xpc_vars *xpc_vars; -struct xpc_vars_part *xpc_vars_part; -static int xp_nasid_mask_bytes; /* actual size in bytes of nasid mask */ -static int xp_nasid_mask_words; /* actual size in words of nasid mask */ +/* >>> next two variables should be 'xpc_' if they remain here */ +static int xp_sizeof_nasid_mask; /* actual size in bytes of nasid mask */ +int xp_nasid_mask_words; /* actual size in words of nasid mask */ struct xpc_partition *xpc_partitions; @@ -150,12 +148,10 @@ xpc_get_rsvd_page_pa(int nasid) * communications. */ struct xpc_rsvd_page * -xpc_rsvd_page_init(void) +xpc_setup_rsvd_page(void) { struct xpc_rsvd_page *rp; - AMO_t *amos_page; - u64 rp_pa, nasid_array = 0; - int i, ret; + u64 rp_pa; /* get the local reserved page's address */ @@ -168,110 +164,44 @@ xpc_rsvd_page_init(void) } rp = (struct xpc_rsvd_page *)__va(rp_pa); - if (rp->partid != sn_partition_id) { - dev_err(xpc_part, "the reserved page's partid of %d should be " - "%d\n", rp->partid, sn_partition_id); + if (rp->SAL_version < 3) { + /* SAL_versions < 3 had a SAL_partid defined as a u8 */ + rp->SAL_partid &= 0xff; + } + BUG_ON(rp->SAL_partid != sn_partition_id); + + if (rp->SAL_partid < 0 || rp->SAL_partid >= xp_max_npartitions) { + dev_err(xpc_part, "the reserved page's partid of %d is outside " + "supported range (< 0 || >= %d)\n", rp->SAL_partid, + xp_max_npartitions); return NULL; } rp->version = XPC_RP_VERSION; + rp->max_npartitions = xp_max_npartitions; /* establish the actual sizes of the nasid masks */ if (rp->SAL_version == 1) { /* SAL_version 1 didn't set the nasids_size field */ - rp->nasids_size = 128; + rp->SAL_nasids_size = 128; } - xp_nasid_mask_bytes = rp->nasids_size; - xp_nasid_mask_words = xp_nasid_mask_bytes / 8; + xp_sizeof_nasid_mask = rp->SAL_nasids_size; + xp_nasid_mask_words = DIV_ROUND_UP(xp_sizeof_nasid_mask, + BYTES_PER_WORD); /* setup the pointers to the various items in the reserved page */ xpc_part_nasids = XPC_RP_PART_NASIDS(rp); xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp); - xpc_vars = XPC_RP_VARS(rp); - xpc_vars_part = XPC_RP_VARS_PART(rp); - /* - * Before clearing xpc_vars, see if a page of AMOs had been previously - * allocated. If not we'll need to allocate one and set permissions - * so that cross-partition AMOs are allowed. - * - * The allocated AMO page needs MCA reporting to remain disabled after - * XPC has unloaded. To make this work, we keep a copy of the pointer - * to this page (i.e., amos_page) in the struct xpc_vars structure, - * which is pointed to by the reserved page, and re-use that saved copy - * on subsequent loads of XPC. This AMO page is never freed, and its - * memory protections are never restricted. - */ - amos_page = xpc_vars->amos_page; - if (amos_page == NULL) { - amos_page = (AMO_t *)TO_AMO(uncached_alloc_page(0, 1)); - if (amos_page == NULL) { - dev_err(xpc_part, "can't allocate page of AMOs\n"); - return NULL; - } - - /* - * Open up AMO-R/W to cpu. This is done for Shub 1.1 systems - * when xpc_allow_IPI_ops() is called via xpc_hb_init(). - */ - if (!enable_shub_wars_1_1()) { - ret = sn_change_memprotect(ia64_tpa((u64)amos_page), - PAGE_SIZE, - SN_MEMPROT_ACCESS_CLASS_1, - &nasid_array); - if (ret != 0) { - dev_err(xpc_part, "can't change memory " - "protections\n"); - uncached_free_page(__IA64_UNCACHED_OFFSET | - TO_PHYS((u64)amos_page), 1); - return NULL; - } - } - } else if (!IS_AMO_ADDRESS((u64)amos_page)) { - /* - * EFI's XPBOOT can also set amos_page in the reserved page, - * but it happens to leave it as an uncached physical address - * and we need it to be an uncached virtual, so we'll have to - * convert it. - */ - if (!IS_AMO_PHYS_ADDRESS((u64)amos_page)) { - dev_err(xpc_part, "previously used amos_page address " - "is bad = 0x%p\n", (void *)amos_page); - return NULL; - } - amos_page = (AMO_t *)TO_AMO((u64)amos_page); - } - - /* clear xpc_vars */ - memset(xpc_vars, 0, sizeof(struct xpc_vars)); - - xpc_vars->version = XPC_V_VERSION; - xpc_vars->act_nasid = cpuid_to_nasid(0); - xpc_vars->act_phys_cpuid = cpu_physical_id(0); - xpc_vars->vars_part_pa = __pa(xpc_vars_part); - xpc_vars->amos_page_pa = ia64_tpa((u64)amos_page); - xpc_vars->amos_page = amos_page; /* save for next load of XPC */ - - /* clear xpc_vars_part */ - memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part) * - xp_max_npartitions); - - /* initialize the activate IRQ related AMO variables */ - for (i = 0; i < xp_nasid_mask_words; i++) - (void)xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i); - - /* initialize the engaged remote partitions related AMO variables */ - (void)xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO); - (void)xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO); - - /* timestamp of when reserved page was setup by XPC */ - rp->stamp = CURRENT_TIME; + if (xpc_rsvd_page_init(rp) != xpSuccess) + return NULL; /* + * Set timestamp of when reserved page was setup by XPC. * This signifies to the remote partition that our reserved * page is initialized. */ - rp->vars_pa = __pa(xpc_vars); + rp->stamp = CURRENT_TIME; return rp; } @@ -465,7 +395,7 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, /* pull over the reserved page header and part_nasids mask */ ret = xp_remote_memcpy(remote_rp, (void *)*remote_rp_pa, - XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes); + XPC_RP_HEADER_SIZE + xp_sizeof_nasid_mask); if (ret != xpSuccess) return ret; @@ -476,19 +406,28 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, discovered_nasids[i] |= remote_part_nasids[i]; } - /* check that the partid is for another partition */ + /* check that the partid is valid and is for another partition */ - if (remote_rp->partid < 0 || remote_rp->partid >= xp_max_npartitions) + if (remote_rp->SAL_partid < 0 || + remote_rp->SAL_partid >= xp_max_npartitions) { return xpInvalidPartid; + } - if (remote_rp->partid == sn_partition_id) + if (remote_rp->SAL_partid == sn_partition_id) return xpLocalPartid; + /* see if the rest of the reserved page has been set up by XPC */ + if (timespec_equal(&remote_rp->stamp, &ZERO_STAMP)) + return xpRsvdPageNotSet; + if (XPC_VERSION_MAJOR(remote_rp->version) != XPC_VERSION_MAJOR(XPC_RP_VERSION)) { return xpBadVersion; } + if (remote_rp->max_npartitions <= sn_partition_id) + return xpInvalidPartid; + return xpSuccess; } @@ -592,7 +531,7 @@ xpc_identify_act_IRQ_req(int nasid) int remote_rp_version; int reactivate = 0; int stamp_diff; - struct timespec remote_rp_stamp = { 0, 0 }; + struct timespec remote_rp_stamp = { 0, 0 }; /*>>> ZERO_STAMP */ short partid; struct xpc_partition *part; enum xp_retval ret; @@ -608,12 +547,12 @@ xpc_identify_act_IRQ_req(int nasid) return; } - remote_vars_pa = remote_rp->vars_pa; + remote_vars_pa = remote_rp->sn.vars_pa; remote_rp_version = remote_rp->version; if (XPC_SUPPORTS_RP_STAMP(remote_rp_version)) remote_rp_stamp = remote_rp->stamp; - partid = remote_rp->partid; + partid = remote_rp->SAL_partid; part = &xpc_partitions[partid]; /* pull over the cross partition variables */ @@ -977,7 +916,7 @@ xpc_discovery(void) enum xp_retval ret; remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE + - xp_nasid_mask_bytes, + xp_sizeof_nasid_mask, GFP_KERNEL, &remote_rp_base); if (remote_rp == NULL) return; @@ -1063,9 +1002,9 @@ xpc_discovery(void) continue; } - remote_vars_pa = remote_rp->vars_pa; + remote_vars_pa = remote_rp->sn.vars_pa; - partid = remote_rp->partid; + partid = remote_rp->SAL_partid; part = &xpc_partitions[partid]; /* pull over the cross partition variables */ @@ -1155,5 +1094,5 @@ xpc_initiate_partid_to_nasids(short partid, void *nasid_mask) part_nasid_pa = (u64)XPC_RP_PART_NASIDS(part->remote_rp_pa); return xp_remote_memcpy(nasid_mask, (void *)part_nasid_pa, - xp_nasid_mask_bytes); + xp_sizeof_nasid_mask); } diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c new file mode 100644 index 00000000000..5a37348715c --- /dev/null +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -0,0 +1,111 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * Cross Partition Communication (XPC) sn2-based functions. + * + * Architecture specific implementation of common functions. + * + */ + +#include +#include +#include +#include "xpc.h" + +struct xpc_vars *xpc_vars; +struct xpc_vars_part *xpc_vars_part; + +static enum xp_retval +xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) +{ + AMO_t *amos_page; + u64 nasid_array = 0; + int i; + int ret; + + xpc_vars = XPC_RP_VARS(rp); + + rp->sn.vars_pa = __pa(xpc_vars); + + xpc_vars_part = XPC_RP_VARS_PART(rp); + + /* + * Before clearing xpc_vars, see if a page of AMOs had been previously + * allocated. If not we'll need to allocate one and set permissions + * so that cross-partition AMOs are allowed. + * + * The allocated AMO page needs MCA reporting to remain disabled after + * XPC has unloaded. To make this work, we keep a copy of the pointer + * to this page (i.e., amos_page) in the struct xpc_vars structure, + * which is pointed to by the reserved page, and re-use that saved copy + * on subsequent loads of XPC. This AMO page is never freed, and its + * memory protections are never restricted. + */ + amos_page = xpc_vars->amos_page; + if (amos_page == NULL) { + amos_page = (AMO_t *)TO_AMO(uncached_alloc_page(0, 1)); + if (amos_page == NULL) { + dev_err(xpc_part, "can't allocate page of AMOs\n"); + return xpNoMemory; + } + + /* + * Open up AMO-R/W to cpu. This is done for Shub 1.1 systems + * when xpc_allow_IPI_ops() is called via xpc_hb_init(). + */ + if (!enable_shub_wars_1_1()) { + ret = sn_change_memprotect(ia64_tpa((u64)amos_page), + PAGE_SIZE, + SN_MEMPROT_ACCESS_CLASS_1, + &nasid_array); + if (ret != 0) { + dev_err(xpc_part, "can't change memory " + "protections\n"); + uncached_free_page(__IA64_UNCACHED_OFFSET | + TO_PHYS((u64)amos_page), 1); + return xpSalError; + } + } + } + + /* clear xpc_vars */ + memset(xpc_vars, 0, sizeof(struct xpc_vars)); + + xpc_vars->version = XPC_V_VERSION; + xpc_vars->act_nasid = cpuid_to_nasid(0); + xpc_vars->act_phys_cpuid = cpu_physical_id(0); + xpc_vars->vars_part_pa = __pa(xpc_vars_part); + xpc_vars->amos_page_pa = ia64_tpa((u64)amos_page); + xpc_vars->amos_page = amos_page; /* save for next load of XPC */ + + /* clear xpc_vars_part */ + memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part) * + xp_max_npartitions); + + /* initialize the activate IRQ related AMO variables */ + for (i = 0; i < xp_nasid_mask_words; i++) + (void)xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i); + + /* initialize the engaged remote partitions related AMO variables */ + (void)xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO); + (void)xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO); + + return xpSuccess; +} + +void +xpc_init_sn2(void) +{ + xpc_rsvd_page_init = xpc_rsvd_page_init_sn2; +} + +void +xpc_exit_sn2(void) +{ +} diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c new file mode 100644 index 00000000000..8327cd4017e --- /dev/null +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -0,0 +1,48 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* + * Cross Partition Communication (XPC) uv-based functions. + * + * Architecture specific implementation of common functions. + * + */ + +#include + +/* >>> #include */ +/* >>> uv_gpa() is defined in */ +#define uv_gpa(_a) ((unsigned long)_a) + +/* >>> temporarily define next three items for xpc.h */ +#define SGI_XPC_ACTIVATE 23 +#define SGI_XPC_NOTIFY 24 +#define sn_send_IPI_phys(_a, _b, _c, _d) + +#include "xpc.h" + +static void *xpc_activate_mq; + +static enum xp_retval +xpc_rsvd_page_init_uv(struct xpc_rsvd_page *rp) +{ + /* >>> need to have established xpc_activate_mq earlier */ + rp->sn.activate_mq_gpa = uv_gpa(xpc_activate_mq); + return xpSuccess; +} + +void +xpc_init_uv(void) +{ + xpc_rsvd_page_init = xpc_rsvd_page_init_uv; +} + +void +xpc_exit_uv(void) +{ +} -- GitLab From e17d416b1bc947df68499863f13b401fb42b48f6 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:06 -0700 Subject: [PATCH 0395/1024] sgi-xp: isolate xpc_vars_part structure to sn2 only Isolate the xpc_vars_part structure of XPC's reserved page to sn2 only. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc.h | 26 +- drivers/misc/sgi-xp/xpc_channel.c | 538 +------------------------- drivers/misc/sgi-xp/xpc_main.c | 97 ++--- drivers/misc/sgi-xp/xpc_partition.c | 1 + drivers/misc/sgi-xp/xpc_sn2.c | 563 +++++++++++++++++++++++++++- drivers/misc/sgi-xp/xpc_uv.c | 48 +++ 6 files changed, 644 insertions(+), 629 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 94b52bb8151..e8c2a162960 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -227,9 +227,9 @@ xpc_disallow_hb(short partid, struct xpc_vars *vars) * itself from that partition. It is desirable that the size of this structure * evenly divides into a 128-byte cacheline, such that none of the entries in * this array crosses a 128-byte cacheline boundary. As it is now, each entry - * occupies a 64-byte cacheline. + * occupies 64-bytes. */ -struct xpc_vars_part { +struct xpc_vars_part_sn2 { u64 magic; u64 openclose_args_pa; /* physical address of open and close args */ @@ -265,8 +265,6 @@ struct xpc_vars_part { #define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words) #define XPC_RP_VARS(_rp) ((struct xpc_vars *)(XPC_RP_MACH_NASIDS(_rp) + \ xp_nasid_mask_words)) -#define XPC_RP_VARS_PART(_rp) ((struct xpc_vars_part *) \ - ((u8 *)XPC_RP_VARS(_rp) + XPC_RP_VARS_SIZE)) /* * Functions registered by add_timer() or called by kernel_thread() only @@ -541,13 +539,6 @@ struct xpc_partition { wait_queue_head_t teardown_wq; /* kthread waiting to teardown infra */ atomic_t references; /* #of references to infrastructure */ - /* - * NONE OF THE PRECEDING FIELDS OF THIS STRUCTURE WILL BE CLEARED WHEN - * XPC SETS UP THE NECESSARY INFRASTRUCTURE TO SUPPORT CROSS PARTITION - * COMMUNICATION. ALL OF THE FOLLOWING FIELDS WILL BE CLEARED. (THE - * 'nchannels' FIELD MUST BE THE FIRST OF THE FIELDS TO BE CLEARED.) - */ - u8 nchannels; /* #of defined channels supported */ atomic_t nchannels_active; /* #of channels that are not DISCONNECTED */ atomic_t nchannels_engaged; /* #of channels engaged with remote part */ @@ -613,7 +604,7 @@ struct xpc_partition { * dropped IPIs. These occur whenever an IPI amo write doesn't complete until * after the IPI was received. */ -#define XPC_P_DROPPED_IPI_WAIT (0.25 * HZ) +#define XPC_P_DROPPED_IPI_WAIT_INTERVAL (0.25 * HZ) /* number of seconds to wait for other partitions to disengage */ #define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT 90 @@ -637,13 +628,16 @@ extern void xpc_activate_partition(struct xpc_partition *); extern void xpc_activate_kthreads(struct xpc_channel *, int); extern void xpc_create_kthreads(struct xpc_channel *, int, int); extern void xpc_disconnect_wait(int); - extern enum xp_retval (*xpc_rsvd_page_init) (struct xpc_rsvd_page *); +extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *); +extern u64 (*xpc_get_IPI_flags) (struct xpc_partition *); +extern struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *); +extern enum xp_retval (*xpc_setup_infrastructure) (struct xpc_partition *); +extern void (*xpc_teardown_infrastructure) (struct xpc_partition *); /* found in xpc_sn2.c */ extern void xpc_init_sn2(void); extern struct xpc_vars *xpc_vars; /*>>> eliminate from here */ -extern struct xpc_vars_part *xpc_vars_part; /*>>> eliminate from here */ /* found in xpc_uv.c */ extern void xpc_init_uv(void); @@ -670,6 +664,7 @@ extern void xpc_deactivate_partition(const int, struct xpc_partition *, extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *); /* found in xpc_channel.c */ +extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **); extern void xpc_initiate_connect(int); extern void xpc_initiate_disconnect(int); extern enum xp_retval xpc_initiate_allocate(short, int, u32, void **); @@ -677,8 +672,6 @@ extern enum xp_retval xpc_initiate_send(short, int, void *); extern enum xp_retval xpc_initiate_send_notify(short, int, void *, xpc_notify_func, void *); extern void xpc_initiate_received(short, int, void *); -extern enum xp_retval xpc_setup_infrastructure(struct xpc_partition *); -extern enum xp_retval xpc_pull_remote_vars_part(struct xpc_partition *); extern void xpc_process_channel_activity(struct xpc_partition *); extern void xpc_connected_callout(struct xpc_channel *); extern void xpc_deliver_msg(struct xpc_channel *); @@ -686,7 +679,6 @@ extern void xpc_disconnect_channel(const int, struct xpc_channel *, enum xp_retval, unsigned long *); extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval); extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval); -extern void xpc_teardown_infrastructure(struct xpc_partition *); static inline void xpc_wakeup_channel_mgr(struct xpc_partition *part) diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 9e79ad7eafe..8081e8155df 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -27,7 +27,7 @@ /* * Guarantee that the kzalloc'd memory is cacheline aligned. */ -static void * +void * xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) { /* see if kzalloc will give us cachline aligned memory by default */ @@ -48,382 +48,6 @@ xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) return (void *)L1_CACHE_ALIGN((u64)*base); } -/* - * Set up the initial values for the XPartition Communication channels. - */ -static void -xpc_initialize_channels(struct xpc_partition *part, short partid) -{ - int ch_number; - struct xpc_channel *ch; - - for (ch_number = 0; ch_number < part->nchannels; ch_number++) { - ch = &part->channels[ch_number]; - - ch->partid = partid; - ch->number = ch_number; - ch->flags = XPC_C_DISCONNECTED; - - ch->local_GP = &part->local_GPs[ch_number]; - ch->local_openclose_args = - &part->local_openclose_args[ch_number]; - - atomic_set(&ch->kthreads_assigned, 0); - atomic_set(&ch->kthreads_idle, 0); - atomic_set(&ch->kthreads_active, 0); - - atomic_set(&ch->references, 0); - atomic_set(&ch->n_to_notify, 0); - - spin_lock_init(&ch->lock); - mutex_init(&ch->msg_to_pull_mutex); - init_completion(&ch->wdisconnect_wait); - - atomic_set(&ch->n_on_msg_allocate_wq, 0); - init_waitqueue_head(&ch->msg_allocate_wq); - init_waitqueue_head(&ch->idle_wq); - } -} - -/* - * Setup the infrastructure necessary to support XPartition Communication - * between the specified remote partition and the local one. - */ -enum xp_retval -xpc_setup_infrastructure(struct xpc_partition *part) -{ - int ret, cpuid; - struct timer_list *timer; - short partid = XPC_PARTID(part); - - /* - * Zero out MOST of the entry for this partition. Only the fields - * starting with `nchannels' will be zeroed. The preceding fields must - * remain `viable' across partition ups and downs, since they may be - * referenced during this memset() operation. - */ - memset(&part->nchannels, 0, sizeof(struct xpc_partition) - - offsetof(struct xpc_partition, nchannels)); - - /* - * Allocate all of the channel structures as a contiguous chunk of - * memory. - */ - part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS, - GFP_KERNEL); - if (part->channels == NULL) { - dev_err(xpc_chan, "can't get memory for channels\n"); - return xpNoMemory; - } - - part->nchannels = XPC_MAX_NCHANNELS; - - /* allocate all the required GET/PUT values */ - - part->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, - GFP_KERNEL, - &part->local_GPs_base); - if (part->local_GPs == NULL) { - kfree(part->channels); - part->channels = NULL; - dev_err(xpc_chan, "can't get memory for local get/put " - "values\n"); - return xpNoMemory; - } - - part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, - GFP_KERNEL, - &part-> - remote_GPs_base); - if (part->remote_GPs == NULL) { - dev_err(xpc_chan, "can't get memory for remote get/put " - "values\n"); - kfree(part->local_GPs_base); - part->local_GPs = NULL; - kfree(part->channels); - part->channels = NULL; - return xpNoMemory; - } - - /* allocate all the required open and close args */ - - part->local_openclose_args = - xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL, - &part->local_openclose_args_base); - if (part->local_openclose_args == NULL) { - dev_err(xpc_chan, "can't get memory for local connect args\n"); - kfree(part->remote_GPs_base); - part->remote_GPs = NULL; - kfree(part->local_GPs_base); - part->local_GPs = NULL; - kfree(part->channels); - part->channels = NULL; - return xpNoMemory; - } - - part->remote_openclose_args = - xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL, - &part->remote_openclose_args_base); - if (part->remote_openclose_args == NULL) { - dev_err(xpc_chan, "can't get memory for remote connect args\n"); - kfree(part->local_openclose_args_base); - part->local_openclose_args = NULL; - kfree(part->remote_GPs_base); - part->remote_GPs = NULL; - kfree(part->local_GPs_base); - part->local_GPs = NULL; - kfree(part->channels); - part->channels = NULL; - return xpNoMemory; - } - - xpc_initialize_channels(part, partid); - - atomic_set(&part->nchannels_active, 0); - atomic_set(&part->nchannels_engaged, 0); - - /* local_IPI_amo were set to 0 by an earlier memset() */ - - /* Initialize this partitions AMO_t structure */ - part->local_IPI_amo_va = xpc_IPI_init(partid); - - spin_lock_init(&part->IPI_lock); - - atomic_set(&part->channel_mgr_requests, 1); - init_waitqueue_head(&part->channel_mgr_wq); - - sprintf(part->IPI_owner, "xpc%02d", partid); - ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, IRQF_SHARED, - part->IPI_owner, (void *)(u64)partid); - if (ret != 0) { - dev_err(xpc_chan, "can't register NOTIFY IRQ handler, " - "errno=%d\n", -ret); - kfree(part->remote_openclose_args_base); - part->remote_openclose_args = NULL; - kfree(part->local_openclose_args_base); - part->local_openclose_args = NULL; - kfree(part->remote_GPs_base); - part->remote_GPs = NULL; - kfree(part->local_GPs_base); - part->local_GPs = NULL; - kfree(part->channels); - part->channels = NULL; - return xpLackOfResources; - } - - /* Setup a timer to check for dropped IPIs */ - timer = &part->dropped_IPI_timer; - init_timer(timer); - timer->function = (void (*)(unsigned long))xpc_dropped_IPI_check; - timer->data = (unsigned long)part; - timer->expires = jiffies + XPC_P_DROPPED_IPI_WAIT; - add_timer(timer); - - /* - * With the setting of the partition setup_state to XPC_P_SETUP, we're - * declaring that this partition is ready to go. - */ - part->setup_state = XPC_P_SETUP; - - /* - * Setup the per partition specific variables required by the - * remote partition to establish channel connections with us. - * - * The setting of the magic # indicates that these per partition - * specific variables are ready to be used. - */ - xpc_vars_part[partid].GPs_pa = __pa(part->local_GPs); - xpc_vars_part[partid].openclose_args_pa = - __pa(part->local_openclose_args); - xpc_vars_part[partid].IPI_amo_pa = __pa(part->local_IPI_amo_va); - cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */ - xpc_vars_part[partid].IPI_nasid = cpuid_to_nasid(cpuid); - xpc_vars_part[partid].IPI_phys_cpuid = cpu_physical_id(cpuid); - xpc_vars_part[partid].nchannels = part->nchannels; - xpc_vars_part[partid].magic = XPC_VP_MAGIC1; - - return xpSuccess; -} - -/* - * Create a wrapper that hides the underlying mechanism for pulling a cacheline - * (or multiple cachelines) from a remote partition. - * - * src must be a cacheline aligned physical address on the remote partition. - * dst must be a cacheline aligned virtual address on this partition. - * cnt must be cacheline sized - */ -static enum xp_retval -xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst, - const void *src, size_t cnt) -{ - enum xp_retval ret; - - DBUG_ON((u64)src != L1_CACHE_ALIGN((u64)src)); - DBUG_ON((u64)dst != L1_CACHE_ALIGN((u64)dst)); - DBUG_ON(cnt != L1_CACHE_ALIGN(cnt)); - - if (part->act_state == XPC_P_DEACTIVATING) - return part->reason; - - ret = xp_remote_memcpy(dst, src, cnt); - if (ret != xpSuccess) { - dev_dbg(xpc_chan, "xp_remote_memcpy() from partition %d failed," - " ret=%d\n", XPC_PARTID(part), ret); - } - return ret; -} - -/* - * Pull the remote per partition specific variables from the specified - * partition. - */ -enum xp_retval -xpc_pull_remote_vars_part(struct xpc_partition *part) -{ - u8 buffer[L1_CACHE_BYTES * 2]; - struct xpc_vars_part *pulled_entry_cacheline = - (struct xpc_vars_part *)L1_CACHE_ALIGN((u64)buffer); - struct xpc_vars_part *pulled_entry; - u64 remote_entry_cacheline_pa, remote_entry_pa; - short partid = XPC_PARTID(part); - enum xp_retval ret; - - /* pull the cacheline that contains the variables we're interested in */ - - DBUG_ON(part->remote_vars_part_pa != - L1_CACHE_ALIGN(part->remote_vars_part_pa)); - DBUG_ON(sizeof(struct xpc_vars_part) != L1_CACHE_BYTES / 2); - - remote_entry_pa = part->remote_vars_part_pa + - sn_partition_id * sizeof(struct xpc_vars_part); - - remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1)); - - pulled_entry = (struct xpc_vars_part *)((u64)pulled_entry_cacheline + - (remote_entry_pa & - (L1_CACHE_BYTES - 1))); - - ret = xpc_pull_remote_cachelines(part, pulled_entry_cacheline, - (void *)remote_entry_cacheline_pa, - L1_CACHE_BYTES); - if (ret != xpSuccess) { - dev_dbg(xpc_chan, "failed to pull XPC vars_part from " - "partition %d, ret=%d\n", partid, ret); - return ret; - } - - /* see if they've been set up yet */ - - if (pulled_entry->magic != XPC_VP_MAGIC1 && - pulled_entry->magic != XPC_VP_MAGIC2) { - - if (pulled_entry->magic != 0) { - dev_dbg(xpc_chan, "partition %d's XPC vars_part for " - "partition %d has bad magic value (=0x%lx)\n", - partid, sn_partition_id, pulled_entry->magic); - return xpBadMagic; - } - - /* they've not been initialized yet */ - return xpRetry; - } - - if (xpc_vars_part[partid].magic == XPC_VP_MAGIC1) { - - /* validate the variables */ - - if (pulled_entry->GPs_pa == 0 || - pulled_entry->openclose_args_pa == 0 || - pulled_entry->IPI_amo_pa == 0) { - - dev_err(xpc_chan, "partition %d's XPC vars_part for " - "partition %d are not valid\n", partid, - sn_partition_id); - return xpInvalidAddress; - } - - /* the variables we imported look to be valid */ - - part->remote_GPs_pa = pulled_entry->GPs_pa; - part->remote_openclose_args_pa = - pulled_entry->openclose_args_pa; - part->remote_IPI_amo_va = - (AMO_t *)__va(pulled_entry->IPI_amo_pa); - part->remote_IPI_nasid = pulled_entry->IPI_nasid; - part->remote_IPI_phys_cpuid = pulled_entry->IPI_phys_cpuid; - - if (part->nchannels > pulled_entry->nchannels) - part->nchannels = pulled_entry->nchannels; - - /* let the other side know that we've pulled their variables */ - - xpc_vars_part[partid].magic = XPC_VP_MAGIC2; - } - - if (pulled_entry->magic == XPC_VP_MAGIC1) - return xpRetry; - - return xpSuccess; -} - -/* - * Get the IPI flags and pull the openclose args and/or remote GPs as needed. - */ -static u64 -xpc_get_IPI_flags(struct xpc_partition *part) -{ - unsigned long irq_flags; - u64 IPI_amo; - enum xp_retval ret; - - /* - * See if there are any IPI flags to be handled. - */ - - spin_lock_irqsave(&part->IPI_lock, irq_flags); - IPI_amo = part->local_IPI_amo; - if (IPI_amo != 0) - part->local_IPI_amo = 0; - - spin_unlock_irqrestore(&part->IPI_lock, irq_flags); - - if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_amo)) { - ret = xpc_pull_remote_cachelines(part, - part->remote_openclose_args, - (void *)part-> - remote_openclose_args_pa, - XPC_OPENCLOSE_ARGS_SIZE); - if (ret != xpSuccess) { - XPC_DEACTIVATE_PARTITION(part, ret); - - dev_dbg(xpc_chan, "failed to pull openclose args from " - "partition %d, ret=%d\n", XPC_PARTID(part), - ret); - - /* don't bother processing IPIs anymore */ - IPI_amo = 0; - } - } - - if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_amo)) { - ret = xpc_pull_remote_cachelines(part, part->remote_GPs, - (void *)part->remote_GPs_pa, - XPC_GP_SIZE); - if (ret != xpSuccess) { - XPC_DEACTIVATE_PARTITION(part, ret); - - dev_dbg(xpc_chan, "failed to pull GPs from partition " - "%d, ret=%d\n", XPC_PARTID(part), ret); - - /* don't bother processing IPIs anymore */ - IPI_amo = 0; - } - } - - return IPI_amo; -} - /* * Allocate the local message queue and the notify queue. */ @@ -1364,59 +988,6 @@ xpc_partition_going_down(struct xpc_partition *part, enum xp_retval reason) xpc_part_deref(part); } -/* - * Teardown the infrastructure necessary to support XPartition Communication - * between the specified remote partition and the local one. - */ -void -xpc_teardown_infrastructure(struct xpc_partition *part) -{ - short partid = XPC_PARTID(part); - - /* - * We start off by making this partition inaccessible to local - * processes by marking it as no longer setup. Then we make it - * inaccessible to remote processes by clearing the XPC per partition - * specific variable's magic # (which indicates that these variables - * are no longer valid) and by ignoring all XPC notify IPIs sent to - * this partition. - */ - - DBUG_ON(atomic_read(&part->nchannels_engaged) != 0); - DBUG_ON(atomic_read(&part->nchannels_active) != 0); - DBUG_ON(part->setup_state != XPC_P_SETUP); - part->setup_state = XPC_P_WTEARDOWN; - - xpc_vars_part[partid].magic = 0; - - free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid); - - /* - * Before proceeding with the teardown we have to wait until all - * existing references cease. - */ - wait_event(part->teardown_wq, (atomic_read(&part->references) == 0)); - - /* now we can begin tearing down the infrastructure */ - - part->setup_state = XPC_P_TORNDOWN; - - /* in case we've still got outstanding timers registered... */ - del_timer_sync(&part->dropped_IPI_timer); - - kfree(part->remote_openclose_args_base); - part->remote_openclose_args = NULL; - kfree(part->local_openclose_args_base); - part->local_openclose_args = NULL; - kfree(part->remote_GPs_base); - part->remote_GPs = NULL; - kfree(part->local_GPs_base); - part->local_GPs = NULL; - kfree(part->channels); - part->channels = NULL; - part->local_IPI_amo_va = NULL; -} - /* * Called by XP at the time of channel connection registration to cause * XPC to establish connections to all currently active partitions. @@ -1974,113 +1545,6 @@ xpc_initiate_send_notify(short partid, int ch_number, void *payload, return ret; } -static struct xpc_msg * -xpc_pull_remote_msg(struct xpc_channel *ch, s64 get) -{ - struct xpc_partition *part = &xpc_partitions[ch->partid]; - struct xpc_msg *remote_msg, *msg; - u32 msg_index, nmsgs; - u64 msg_offset; - enum xp_retval ret; - - if (mutex_lock_interruptible(&ch->msg_to_pull_mutex) != 0) { - /* we were interrupted by a signal */ - return NULL; - } - - while (get >= ch->next_msg_to_pull) { - - /* pull as many messages as are ready and able to be pulled */ - - msg_index = ch->next_msg_to_pull % ch->remote_nentries; - - DBUG_ON(ch->next_msg_to_pull >= ch->w_remote_GP.put); - nmsgs = ch->w_remote_GP.put - ch->next_msg_to_pull; - if (msg_index + nmsgs > ch->remote_nentries) { - /* ignore the ones that wrap the msg queue for now */ - nmsgs = ch->remote_nentries - msg_index; - } - - msg_offset = msg_index * ch->msg_size; - msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset); - remote_msg = (struct xpc_msg *)(ch->remote_msgqueue_pa + - msg_offset); - - ret = xpc_pull_remote_cachelines(part, msg, remote_msg, - nmsgs * ch->msg_size); - if (ret != xpSuccess) { - - dev_dbg(xpc_chan, "failed to pull %d msgs starting with" - " msg %ld from partition %d, channel=%d, " - "ret=%d\n", nmsgs, ch->next_msg_to_pull, - ch->partid, ch->number, ret); - - XPC_DEACTIVATE_PARTITION(part, ret); - - mutex_unlock(&ch->msg_to_pull_mutex); - return NULL; - } - - ch->next_msg_to_pull += nmsgs; - } - - mutex_unlock(&ch->msg_to_pull_mutex); - - /* return the message we were looking for */ - msg_offset = (get % ch->remote_nentries) * ch->msg_size; - msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset); - - return msg; -} - -/* - * Get a message to be delivered. - */ -static struct xpc_msg * -xpc_get_deliverable_msg(struct xpc_channel *ch) -{ - struct xpc_msg *msg = NULL; - s64 get; - - do { - if (ch->flags & XPC_C_DISCONNECTING) - break; - - get = ch->w_local_GP.get; - rmb(); /* guarantee that .get loads before .put */ - if (get == ch->w_remote_GP.put) - break; - - /* There are messages waiting to be pulled and delivered. - * We need to try to secure one for ourselves. We'll do this - * by trying to increment w_local_GP.get and hope that no one - * else beats us to it. If they do, we'll we'll simply have - * to try again for the next one. - */ - - if (cmpxchg(&ch->w_local_GP.get, get, get + 1) == get) { - /* we got the entry referenced by get */ - - dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, " - "partid=%d, channel=%d\n", get + 1, - ch->partid, ch->number); - - /* pull the message from the remote partition */ - - msg = xpc_pull_remote_msg(ch, get); - - DBUG_ON(msg != NULL && msg->number != get); - DBUG_ON(msg != NULL && (msg->flags & XPC_M_DONE)); - DBUG_ON(msg != NULL && !(msg->flags & XPC_M_READY)); - - break; - } - - } while (1); - - return msg; -} - /* * Deliver a message to its intended recipient. */ diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 2180f1f7e08..be3a4853930 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -176,6 +176,12 @@ static struct notifier_block xpc_die_notifier = { }; enum xp_retval (*xpc_rsvd_page_init) (struct xpc_rsvd_page *rp); +enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part); +u64 (*xpc_get_IPI_flags) (struct xpc_partition *part); +struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *ch); +enum xp_retval (*xpc_setup_infrastructure) (struct xpc_partition *part); +void (*xpc_teardown_infrastructure) (struct xpc_partition *part); + /* * Timer function to enforce the timelimit on the partition disengage request. @@ -312,38 +318,9 @@ xpc_initiate_discovery(void *ignore) return 0; } -/* - * Establish first contact with the remote partititon. This involves pulling - * the XPC per partition variables from the remote partition and waiting for - * the remote partition to pull ours. - */ -static enum xp_retval -xpc_make_first_contact(struct xpc_partition *part) -{ - enum xp_retval ret; - - while ((ret = xpc_pull_remote_vars_part(part)) != xpSuccess) { - if (ret != xpRetry) { - XPC_DEACTIVATE_PARTITION(part, ret); - return ret; - } - - dev_dbg(xpc_chan, "waiting to make first contact with " - "partition %d\n", XPC_PARTID(part)); - - /* wait a 1/4 of a second or so */ - (void)msleep_interruptible(250); - - if (part->act_state == XPC_P_DEACTIVATING) - return part->reason; - } - - return xpc_mark_partition_active(part); -} - /* * The first kthread assigned to a newly activated partition is the one - * created by XPC HB with which it calls xpc_partition_up(). XPC hangs on to + * created by XPC HB with which it calls xpc_activating(). XPC hangs on to * that kthread until the partition is brought down, at which time that kthread * returns back to XPC HB. (The return of that kthread will signify to XPC HB * that XPC has dismantled all communication infrastructure for the associated @@ -393,41 +370,10 @@ xpc_channel_mgr(struct xpc_partition *part) * upped partition. * * The kthread that was created by XPC HB and which setup the XPC - * infrastructure will remain assigned to the partition until the partition - * goes down. At which time the kthread will teardown the XPC infrastructure - * and then exit. - * - * XPC HB will put the remote partition's XPC per partition specific variables - * physical address into xpc_partitions[partid].remote_vars_part_pa prior to - * calling xpc_partition_up(). + * infrastructure will remain assigned to the partition becoming the channel + * manager for that partition until the partition is deactivating, at which + * time the kthread will teardown the XPC infrastructure and then exit. */ -static void -xpc_partition_up(struct xpc_partition *part) -{ - DBUG_ON(part->channels != NULL); - - dev_dbg(xpc_chan, "activating partition %d\n", XPC_PARTID(part)); - - if (xpc_setup_infrastructure(part) != xpSuccess) - return; - - /* - * The kthread that XPC HB called us with will become the - * channel manager for this partition. It will not return - * back to XPC HB until the partition's XPC infrastructure - * has been dismantled. - */ - - (void)xpc_part_ref(part); /* this will always succeed */ - - if (xpc_make_first_contact(part) == xpSuccess) - xpc_channel_mgr(part); - - xpc_part_deref(part); - - xpc_teardown_infrastructure(part); -} - static int xpc_activating(void *__partid) { @@ -453,7 +399,7 @@ xpc_activating(void *__partid) XPC_SET_REASON(part, 0, 0); spin_unlock_irqrestore(&part->act_lock, irq_flags); - dev_dbg(xpc_part, "bringing partition %d up\n", partid); + dev_dbg(xpc_part, "activating partition %d\n", partid); /* * Register the remote partition's AMOs with SAL so it can handle @@ -467,7 +413,7 @@ xpc_activating(void *__partid) */ if (sn_register_xp_addr_region(part->remote_amos_page_pa, PAGE_SIZE, 1) < 0) { - dev_warn(xpc_part, "xpc_partition_up(%d) failed to register " + dev_warn(xpc_part, "xpc_activating(%d) failed to register " "xp_addr region\n", partid); spin_lock_irqsave(&part->act_lock, irq_flags); @@ -481,11 +427,18 @@ xpc_activating(void *__partid) xpc_allow_hb(partid, xpc_vars); xpc_IPI_send_activated(part); - /* - * xpc_partition_up() holds this thread and marks this partition as - * XPC_P_ACTIVE by calling xpc_hb_mark_active(). - */ - (void)xpc_partition_up(part); + if (xpc_setup_infrastructure(part) == xpSuccess) { + (void)xpc_part_ref(part); /* this will always succeed */ + + if (xpc_make_first_contact(part) == xpSuccess) { + xpc_mark_partition_active(part); + xpc_channel_mgr(part); + /* won't return until partition is deactivating */ + } + + xpc_part_deref(part); + xpc_teardown_infrastructure(part); + } xpc_disallow_hb(partid, xpc_vars); xpc_mark_partition_inactive(part); @@ -568,7 +521,7 @@ xpc_dropped_IPI_check(struct xpc_partition *part) xpc_check_for_channel_activity(part); part->dropped_IPI_timer.expires = jiffies + - XPC_P_DROPPED_IPI_WAIT; + XPC_P_DROPPED_IPI_WAIT_INTERVAL; add_timer(&part->dropped_IPI_timer); xpc_part_deref(part); } diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index 1db84cb4914..be5b7547dab 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -486,6 +486,7 @@ xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version, dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n", part->last_heartbeat); +/* >>> remote_vars_part_pa and vars_part_pa are sn2 only!!! */ part->remote_vars_part_pa = remote_vars->vars_part_pa; dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n", part->remote_vars_part_pa); diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 5a37348715c..ee28e231dc4 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -14,12 +14,13 @@ */ #include +#include #include #include #include "xpc.h" struct xpc_vars *xpc_vars; -struct xpc_vars_part *xpc_vars_part; +static struct xpc_vars_part_sn2 *xpc_vars_part; /* >>> Add _sn2 suffix? */ static enum xp_retval xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) @@ -33,7 +34,10 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) rp->sn.vars_pa = __pa(xpc_vars); - xpc_vars_part = XPC_RP_VARS_PART(rp); + /* vars_part array follows immediately after vars */ + xpc_vars_part = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) + + XPC_RP_VARS_SIZE); + /* * Before clearing xpc_vars, see if a page of AMOs had been previously @@ -85,7 +89,7 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) xpc_vars->amos_page = amos_page; /* save for next load of XPC */ /* clear xpc_vars_part */ - memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part) * + memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part_sn2) * xp_max_npartitions); /* initialize the activate IRQ related AMO variables */ @@ -99,10 +103,563 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) return xpSuccess; } +/* + * Setup the infrastructure necessary to support XPartition Communication + * between the specified remote partition and the local one. + */ +static enum xp_retval +xpc_setup_infrastructure_sn2(struct xpc_partition *part) +{ + enum xp_retval retval; + int ret; + int cpuid; + int ch_number; + struct xpc_channel *ch; + struct timer_list *timer; + short partid = XPC_PARTID(part); + + /* + * Allocate all of the channel structures as a contiguous chunk of + * memory. + */ + DBUG_ON(part->channels != NULL); + part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS, + GFP_KERNEL); + if (part->channels == NULL) { + dev_err(xpc_chan, "can't get memory for channels\n"); + return xpNoMemory; + } + + /* allocate all the required GET/PUT values */ + + part->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, + GFP_KERNEL, + &part->local_GPs_base); + if (part->local_GPs == NULL) { + dev_err(xpc_chan, "can't get memory for local get/put " + "values\n"); + retval = xpNoMemory; + goto out_1; + } + + part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, + GFP_KERNEL, + &part-> + remote_GPs_base); + if (part->remote_GPs == NULL) { + dev_err(xpc_chan, "can't get memory for remote get/put " + "values\n"); + retval = xpNoMemory; + goto out_2; + } + + part->remote_GPs_pa = 0; + + /* allocate all the required open and close args */ + + part->local_openclose_args = + xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL, + &part->local_openclose_args_base); + if (part->local_openclose_args == NULL) { + dev_err(xpc_chan, "can't get memory for local connect args\n"); + retval = xpNoMemory; + goto out_3; + } + + part->remote_openclose_args = + xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL, + &part->remote_openclose_args_base); + if (part->remote_openclose_args == NULL) { + dev_err(xpc_chan, "can't get memory for remote connect args\n"); + retval = xpNoMemory; + goto out_4; + } + + part->remote_openclose_args_pa = 0; + + part->local_IPI_amo_va = xpc_IPI_init(partid); + part->local_IPI_amo = 0; + spin_lock_init(&part->IPI_lock); + + part->remote_IPI_nasid = 0; + part->remote_IPI_phys_cpuid = 0; + part->remote_IPI_amo_va = NULL; + + atomic_set(&part->channel_mgr_requests, 1); + init_waitqueue_head(&part->channel_mgr_wq); + + sprintf(part->IPI_owner, "xpc%02d", partid); + ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, IRQF_SHARED, + part->IPI_owner, (void *)(u64)partid); + if (ret != 0) { + dev_err(xpc_chan, "can't register NOTIFY IRQ handler, " + "errno=%d\n", -ret); + retval = xpLackOfResources; + goto out_5; + } + + /* Setup a timer to check for dropped IPIs */ + timer = &part->dropped_IPI_timer; + init_timer(timer); + timer->function = (void (*)(unsigned long))xpc_dropped_IPI_check; + timer->data = (unsigned long)part; + timer->expires = jiffies + XPC_P_DROPPED_IPI_WAIT_INTERVAL; + add_timer(timer); + + part->nchannels = XPC_MAX_NCHANNELS; + + atomic_set(&part->nchannels_active, 0); + atomic_set(&part->nchannels_engaged, 0); + + for (ch_number = 0; ch_number < part->nchannels; ch_number++) { + ch = &part->channels[ch_number]; + + ch->partid = partid; + ch->number = ch_number; + ch->flags = XPC_C_DISCONNECTED; + + ch->local_GP = &part->local_GPs[ch_number]; + ch->local_openclose_args = + &part->local_openclose_args[ch_number]; + + atomic_set(&ch->kthreads_assigned, 0); + atomic_set(&ch->kthreads_idle, 0); + atomic_set(&ch->kthreads_active, 0); + + atomic_set(&ch->references, 0); + atomic_set(&ch->n_to_notify, 0); + + spin_lock_init(&ch->lock); + mutex_init(&ch->msg_to_pull_mutex); + init_completion(&ch->wdisconnect_wait); + + atomic_set(&ch->n_on_msg_allocate_wq, 0); + init_waitqueue_head(&ch->msg_allocate_wq); + init_waitqueue_head(&ch->idle_wq); + } + + /* + * With the setting of the partition setup_state to XPC_P_SETUP, we're + * declaring that this partition is ready to go. + */ + part->setup_state = XPC_P_SETUP; + + /* + * Setup the per partition specific variables required by the + * remote partition to establish channel connections with us. + * + * The setting of the magic # indicates that these per partition + * specific variables are ready to be used. + */ + xpc_vars_part[partid].GPs_pa = __pa(part->local_GPs); + xpc_vars_part[partid].openclose_args_pa = + __pa(part->local_openclose_args); + xpc_vars_part[partid].IPI_amo_pa = __pa(part->local_IPI_amo_va); + cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */ + xpc_vars_part[partid].IPI_nasid = cpuid_to_nasid(cpuid); + xpc_vars_part[partid].IPI_phys_cpuid = cpu_physical_id(cpuid); + xpc_vars_part[partid].nchannels = part->nchannels; + xpc_vars_part[partid].magic = XPC_VP_MAGIC1; + + return xpSuccess; + + /* setup of infrastructure failed */ +out_5: + kfree(part->remote_openclose_args_base); + part->remote_openclose_args = NULL; +out_4: + kfree(part->local_openclose_args_base); + part->local_openclose_args = NULL; +out_3: + kfree(part->remote_GPs_base); + part->remote_GPs = NULL; +out_2: + kfree(part->local_GPs_base); + part->local_GPs = NULL; +out_1: + kfree(part->channels); + part->channels = NULL; + return retval; +} + +/* + * Teardown the infrastructure necessary to support XPartition Communication + * between the specified remote partition and the local one. + */ +static void +xpc_teardown_infrastructure_sn2(struct xpc_partition *part) +{ + short partid = XPC_PARTID(part); + + /* + * We start off by making this partition inaccessible to local + * processes by marking it as no longer setup. Then we make it + * inaccessible to remote processes by clearing the XPC per partition + * specific variable's magic # (which indicates that these variables + * are no longer valid) and by ignoring all XPC notify IPIs sent to + * this partition. + */ + + DBUG_ON(atomic_read(&part->nchannels_engaged) != 0); + DBUG_ON(atomic_read(&part->nchannels_active) != 0); + DBUG_ON(part->setup_state != XPC_P_SETUP); + part->setup_state = XPC_P_WTEARDOWN; + + xpc_vars_part[partid].magic = 0; + + free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid); + + /* + * Before proceeding with the teardown we have to wait until all + * existing references cease. + */ + wait_event(part->teardown_wq, (atomic_read(&part->references) == 0)); + + /* now we can begin tearing down the infrastructure */ + + part->setup_state = XPC_P_TORNDOWN; + + /* in case we've still got outstanding timers registered... */ + del_timer_sync(&part->dropped_IPI_timer); + + kfree(part->remote_openclose_args_base); + part->remote_openclose_args = NULL; + kfree(part->local_openclose_args_base); + part->local_openclose_args = NULL; + kfree(part->remote_GPs_base); + part->remote_GPs = NULL; + kfree(part->local_GPs_base); + part->local_GPs = NULL; + kfree(part->channels); + part->channels = NULL; + part->local_IPI_amo_va = NULL; +} + +/* + * Create a wrapper that hides the underlying mechanism for pulling a cacheline + * (or multiple cachelines) from a remote partition. + * + * src must be a cacheline aligned physical address on the remote partition. + * dst must be a cacheline aligned virtual address on this partition. + * cnt must be cacheline sized + */ +/* >>> Replace this function by call to xp_remote_memcpy() or bte_copy()? */ +static enum xp_retval +xpc_pull_remote_cachelines_sn2(struct xpc_partition *part, void *dst, + const void *src, size_t cnt) +{ + enum xp_retval ret; + + DBUG_ON((u64)src != L1_CACHE_ALIGN((u64)src)); + DBUG_ON((u64)dst != L1_CACHE_ALIGN((u64)dst)); + DBUG_ON(cnt != L1_CACHE_ALIGN(cnt)); + + if (part->act_state == XPC_P_DEACTIVATING) + return part->reason; + + ret = xp_remote_memcpy(dst, src, cnt); + if (ret != xpSuccess) { + dev_dbg(xpc_chan, "xp_remote_memcpy() from partition %d failed," + " ret=%d\n", XPC_PARTID(part), ret); + } + return ret; +} + +/* + * Pull the remote per partition specific variables from the specified + * partition. + */ +static enum xp_retval +xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) +{ + u8 buffer[L1_CACHE_BYTES * 2]; + struct xpc_vars_part_sn2 *pulled_entry_cacheline = + (struct xpc_vars_part_sn2 *)L1_CACHE_ALIGN((u64)buffer); + struct xpc_vars_part_sn2 *pulled_entry; + u64 remote_entry_cacheline_pa, remote_entry_pa; + short partid = XPC_PARTID(part); + enum xp_retval ret; + + /* pull the cacheline that contains the variables we're interested in */ + + DBUG_ON(part->remote_vars_part_pa != + L1_CACHE_ALIGN(part->remote_vars_part_pa)); + DBUG_ON(sizeof(struct xpc_vars_part_sn2) != L1_CACHE_BYTES / 2); + + remote_entry_pa = part->remote_vars_part_pa + + sn_partition_id * sizeof(struct xpc_vars_part_sn2); + + remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1)); + + pulled_entry = (struct xpc_vars_part_sn2 *)((u64)pulled_entry_cacheline + + (remote_entry_pa & + (L1_CACHE_BYTES - 1))); + + ret = xpc_pull_remote_cachelines_sn2(part, pulled_entry_cacheline, + (void *)remote_entry_cacheline_pa, + L1_CACHE_BYTES); + if (ret != xpSuccess) { + dev_dbg(xpc_chan, "failed to pull XPC vars_part from " + "partition %d, ret=%d\n", partid, ret); + return ret; + } + + /* see if they've been set up yet */ + + if (pulled_entry->magic != XPC_VP_MAGIC1 && + pulled_entry->magic != XPC_VP_MAGIC2) { + + if (pulled_entry->magic != 0) { + dev_dbg(xpc_chan, "partition %d's XPC vars_part for " + "partition %d has bad magic value (=0x%lx)\n", + partid, sn_partition_id, pulled_entry->magic); + return xpBadMagic; + } + + /* they've not been initialized yet */ + return xpRetry; + } + + if (xpc_vars_part[partid].magic == XPC_VP_MAGIC1) { + + /* validate the variables */ + + if (pulled_entry->GPs_pa == 0 || + pulled_entry->openclose_args_pa == 0 || + pulled_entry->IPI_amo_pa == 0) { + + dev_err(xpc_chan, "partition %d's XPC vars_part for " + "partition %d are not valid\n", partid, + sn_partition_id); + return xpInvalidAddress; + } + + /* the variables we imported look to be valid */ + + part->remote_GPs_pa = pulled_entry->GPs_pa; + part->remote_openclose_args_pa = + pulled_entry->openclose_args_pa; + part->remote_IPI_amo_va = + (AMO_t *)__va(pulled_entry->IPI_amo_pa); + part->remote_IPI_nasid = pulled_entry->IPI_nasid; + part->remote_IPI_phys_cpuid = pulled_entry->IPI_phys_cpuid; + + if (part->nchannels > pulled_entry->nchannels) + part->nchannels = pulled_entry->nchannels; + + /* let the other side know that we've pulled their variables */ + + xpc_vars_part[partid].magic = XPC_VP_MAGIC2; + } + + if (pulled_entry->magic == XPC_VP_MAGIC1) + return xpRetry; + + return xpSuccess; +} + +/* + * Establish first contact with the remote partititon. This involves pulling + * the XPC per partition variables from the remote partition and waiting for + * the remote partition to pull ours. + */ +static enum xp_retval +xpc_make_first_contact_sn2(struct xpc_partition *part) +{ + enum xp_retval ret; + + while ((ret = xpc_pull_remote_vars_part_sn2(part)) != xpSuccess) { + if (ret != xpRetry) { + XPC_DEACTIVATE_PARTITION(part, ret); + return ret; + } + + dev_dbg(xpc_part, "waiting to make first contact with " + "partition %d\n", XPC_PARTID(part)); + + /* wait a 1/4 of a second or so */ + (void)msleep_interruptible(250); + + if (part->act_state == XPC_P_DEACTIVATING) + return part->reason; + } + + return xpSuccess; +} + +/* + * Get the IPI flags and pull the openclose args and/or remote GPs as needed. + */ +static u64 +xpc_get_IPI_flags_sn2(struct xpc_partition *part) +{ + unsigned long irq_flags; + u64 IPI_amo; + enum xp_retval ret; + + /* + * See if there are any IPI flags to be handled. + */ + + spin_lock_irqsave(&part->IPI_lock, irq_flags); + IPI_amo = part->local_IPI_amo; + if (IPI_amo != 0) + part->local_IPI_amo = 0; + + spin_unlock_irqrestore(&part->IPI_lock, irq_flags); + + if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_amo)) { + ret = xpc_pull_remote_cachelines_sn2(part, + part->remote_openclose_args, + (void *)part-> + remote_openclose_args_pa, + XPC_OPENCLOSE_ARGS_SIZE); + if (ret != xpSuccess) { + XPC_DEACTIVATE_PARTITION(part, ret); + + dev_dbg(xpc_chan, "failed to pull openclose args from " + "partition %d, ret=%d\n", XPC_PARTID(part), + ret); + + /* don't bother processing IPIs anymore */ + IPI_amo = 0; + } + } + + if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_amo)) { + ret = xpc_pull_remote_cachelines_sn2(part, part->remote_GPs, + (void *)part->remote_GPs_pa, + XPC_GP_SIZE); + if (ret != xpSuccess) { + XPC_DEACTIVATE_PARTITION(part, ret); + + dev_dbg(xpc_chan, "failed to pull GPs from partition " + "%d, ret=%d\n", XPC_PARTID(part), ret); + + /* don't bother processing IPIs anymore */ + IPI_amo = 0; + } + } + + return IPI_amo; +} + +static struct xpc_msg * +xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get) +{ + struct xpc_partition *part = &xpc_partitions[ch->partid]; + struct xpc_msg *remote_msg, *msg; + u32 msg_index, nmsgs; + u64 msg_offset; + enum xp_retval ret; + + if (mutex_lock_interruptible(&ch->msg_to_pull_mutex) != 0) { + /* we were interrupted by a signal */ + return NULL; + } + + while (get >= ch->next_msg_to_pull) { + + /* pull as many messages as are ready and able to be pulled */ + + msg_index = ch->next_msg_to_pull % ch->remote_nentries; + + DBUG_ON(ch->next_msg_to_pull >= ch->w_remote_GP.put); + nmsgs = ch->w_remote_GP.put - ch->next_msg_to_pull; + if (msg_index + nmsgs > ch->remote_nentries) { + /* ignore the ones that wrap the msg queue for now */ + nmsgs = ch->remote_nentries - msg_index; + } + + msg_offset = msg_index * ch->msg_size; + msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset); + remote_msg = (struct xpc_msg *)(ch->remote_msgqueue_pa + + msg_offset); + + ret = xpc_pull_remote_cachelines_sn2(part, msg, remote_msg, + nmsgs * ch->msg_size); + if (ret != xpSuccess) { + + dev_dbg(xpc_chan, "failed to pull %d msgs starting with" + " msg %ld from partition %d, channel=%d, " + "ret=%d\n", nmsgs, ch->next_msg_to_pull, + ch->partid, ch->number, ret); + + XPC_DEACTIVATE_PARTITION(part, ret); + + mutex_unlock(&ch->msg_to_pull_mutex); + return NULL; + } + + ch->next_msg_to_pull += nmsgs; + } + + mutex_unlock(&ch->msg_to_pull_mutex); + + /* return the message we were looking for */ + msg_offset = (get % ch->remote_nentries) * ch->msg_size; + msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset); + + return msg; +} + +/* + * Get a message to be delivered. + */ +static struct xpc_msg * +xpc_get_deliverable_msg_sn2(struct xpc_channel *ch) +{ + struct xpc_msg *msg = NULL; + s64 get; + + do { + if (ch->flags & XPC_C_DISCONNECTING) + break; + + get = ch->w_local_GP.get; + rmb(); /* guarantee that .get loads before .put */ + if (get == ch->w_remote_GP.put) + break; + + /* There are messages waiting to be pulled and delivered. + * We need to try to secure one for ourselves. We'll do this + * by trying to increment w_local_GP.get and hope that no one + * else beats us to it. If they do, we'll we'll simply have + * to try again for the next one. + */ + + if (cmpxchg(&ch->w_local_GP.get, get, get + 1) == get) { + /* we got the entry referenced by get */ + + dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, " + "partid=%d, channel=%d\n", get + 1, + ch->partid, ch->number); + + /* pull the message from the remote partition */ + + msg = xpc_pull_remote_msg_sn2(ch, get); + + DBUG_ON(msg != NULL && msg->number != get); + DBUG_ON(msg != NULL && (msg->flags & XPC_M_DONE)); + DBUG_ON(msg != NULL && !(msg->flags & XPC_M_READY)); + + break; + } + + } while (1); + + return msg; +} + void xpc_init_sn2(void) { xpc_rsvd_page_init = xpc_rsvd_page_init_sn2; + xpc_setup_infrastructure = xpc_setup_infrastructure_sn2; + xpc_teardown_infrastructure = xpc_teardown_infrastructure_sn2; + xpc_make_first_contact = xpc_make_first_contact_sn2; + xpc_get_IPI_flags = xpc_get_IPI_flags_sn2; + xpc_get_deliverable_msg = xpc_get_deliverable_msg_sn2; } void diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 8327cd4017e..770f0a8c669 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -36,10 +36,58 @@ xpc_rsvd_page_init_uv(struct xpc_rsvd_page *rp) return xpSuccess; } +/* + * Setup the infrastructure necessary to support XPartition Communication + * between the specified remote partition and the local one. + */ +static enum xp_retval +xpc_setup_infrastructure_uv(struct xpc_partition *part) +{ + /* >>> this function needs fleshing out */ + return xpUnsupported; +} + +/* + * Teardown the infrastructure necessary to support XPartition Communication + * between the specified remote partition and the local one. + */ +static void +xpc_teardown_infrastructure_uv(struct xpc_partition *part) +{ + /* >>> this function needs fleshing out */ + return; +} + +static enum xp_retval +xpc_make_first_contact_uv(struct xpc_partition *part) +{ + /* >>> this function needs fleshing out */ + return xpUnsupported; +} + +static u64 +xpc_get_IPI_flags_uv(struct xpc_partition *part) +{ + /* >>> this function needs fleshing out */ + return 0UL; +} + +static struct xpc_msg * +xpc_get_deliverable_msg_uv(struct xpc_channel *ch) +{ + /* >>> this function needs fleshing out */ + return NULL; +} + void xpc_init_uv(void) { xpc_rsvd_page_init = xpc_rsvd_page_init_uv; + xpc_setup_infrastructure = xpc_setup_infrastructure_uv; + xpc_teardown_infrastructure = xpc_teardown_infrastructure_uv; + xpc_make_first_contact = xpc_make_first_contact_uv; + xpc_get_IPI_flags = xpc_get_IPI_flags_uv; + xpc_get_deliverable_msg = xpc_get_deliverable_msg_uv; } void -- GitLab From 33ba3c7724be79f7cdbfc611335572c056d9a05a Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:07 -0700 Subject: [PATCH 0396/1024] sgi-xp: isolate xpc_vars structure to sn2 only Isolate the xpc_vars structure of XPC's reserved page to sn2 only. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc.h | 529 +++--------- drivers/misc/sgi-xp/xpc_channel.c | 315 +------ drivers/misc/sgi-xp/xpc_main.c | 152 ++-- drivers/misc/sgi-xp/xpc_partition.c | 454 +--------- drivers/misc/sgi-xp/xpc_sn2.c | 1181 ++++++++++++++++++++++++++- drivers/misc/sgi-xp/xpc_uv.c | 57 +- 6 files changed, 1433 insertions(+), 1255 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index e8c2a162960..a3a67485cf8 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -159,10 +159,10 @@ xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2) * reflected by incrementing either the major or minor version numbers * of struct xpc_vars. */ -struct xpc_vars { +struct xpc_vars_sn2 { u8 version; u64 heartbeat; - u64 heartbeating_to_mask; + DECLARE_BITMAP(heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2); u64 heartbeat_offline; /* if 0, heartbeat should be changing */ int act_nasid; int act_phys_cpuid; @@ -176,46 +176,23 @@ struct xpc_vars { #define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \ (_version >= _XPC_VERSION(3, 1)) -static inline int -xpc_hb_allowed(short partid, struct xpc_vars *vars) -{ - return ((vars->heartbeating_to_mask & (1UL << partid)) != 0); -} - -static inline void -xpc_allow_hb(short partid, struct xpc_vars *vars) -{ - u64 old_mask, new_mask; - - do { - old_mask = vars->heartbeating_to_mask; - new_mask = (old_mask | (1UL << partid)); - } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) != - old_mask); -} - -static inline void -xpc_disallow_hb(short partid, struct xpc_vars *vars) -{ - u64 old_mask, new_mask; - - do { - old_mask = vars->heartbeating_to_mask; - new_mask = (old_mask & ~(1UL << partid)); - } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) != - old_mask); -} - /* - * The AMOs page consists of a number of AMO variables which are divided into - * four groups, The first two groups are used to identify an IRQ's sender. - * These two groups consist of 64 and 128 AMO variables respectively. The last - * two groups, consisting of just one AMO variable each, are used to identify - * the remote partitions that are currently engaged (from the viewpoint of - * the XPC running on the remote partition). + * The following pertains to ia64-sn2 only. + * + * Memory for XPC's AMO variables is allocated by the MSPEC driver. These + * pages are located in the lowest granule. The lowest granule uses 4k pages + * for cached references and an alternate TLB handler to never provide a + * cacheable mapping for the entire region. This will prevent speculative + * reading of cached copies of our lines from being issued which will cause + * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 + * AMO variables (based on XP_MAX_NPARTITIONS_SN2) to identify the senders of + * NOTIFY IRQs, 128 AMO variables (based on XP_NASID_MASK_WORDS) to identify + * the senders of ACTIVATE IRQs, and 2 AMO variables to identify which remote + * partitions (i.e., XPCs) consider themselves currently engaged with the + * local XPC. */ -#define XPC_NOTIFY_IRQ_AMOS 0 -#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_NPARTITIONS_SN2) +#define XPC_NOTIFY_IRQ_AMOS 0 +#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_NPARTITIONS_SN2) #define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS) #define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1) @@ -259,11 +236,11 @@ struct xpc_vars_part_sn2 { /* the reserved page sizes and offsets */ #define XPC_RP_HEADER_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page)) -#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars)) +#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars_sn2)) #define XPC_RP_PART_NASIDS(_rp) ((u64 *)((u8 *)(_rp) + XPC_RP_HEADER_SIZE)) #define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words) -#define XPC_RP_VARS(_rp) ((struct xpc_vars *)(XPC_RP_MACH_NASIDS(_rp) + \ +#define XPC_RP_VARS(_rp) ((struct xpc_vars_sn2 *)(XPC_RP_MACH_NASIDS(_rp) + \ xp_nasid_mask_words)) /* @@ -344,6 +321,7 @@ struct xpc_notify { * allocated at the time a partition becomes active. The array contains one * of these structures for each potential channel connection to that partition. * +>>> sn2 only!!! * Each of these structures manages two message queues (circular buffers). * They are allocated at the time a channel connection is made. One of * these message queues (local_msgqueue) holds the locally created messages @@ -622,6 +600,9 @@ extern struct device *xpc_part; extern struct device *xpc_chan; extern int xpc_disengage_request_timelimit; extern int xpc_disengage_request_timedout; +extern atomic_t xpc_act_IRQ_rcvd; +extern wait_queue_head_t xpc_act_IRQ_wq; +extern void *xpc_heartbeating_to_mask; extern irqreturn_t xpc_notify_IRQ_handler(int, void *); extern void xpc_dropped_IPI_check(struct xpc_partition *); extern void xpc_activate_partition(struct xpc_partition *); @@ -629,15 +610,48 @@ extern void xpc_activate_kthreads(struct xpc_channel *, int); extern void xpc_create_kthreads(struct xpc_channel *, int, int); extern void xpc_disconnect_wait(int); extern enum xp_retval (*xpc_rsvd_page_init) (struct xpc_rsvd_page *); +extern void (*xpc_heartbeat_init) (void); +extern void (*xpc_heartbeat_exit) (void); +extern void (*xpc_increment_heartbeat) (void); +extern void (*xpc_offline_heartbeat) (void); +extern void (*xpc_online_heartbeat) (void); +extern void (*xpc_check_remote_hb) (void); extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *); extern u64 (*xpc_get_IPI_flags) (struct xpc_partition *); extern struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *); +extern void (*xpc_initiate_partition_activation) (struct xpc_rsvd_page *, u64, + int); +extern void (*xpc_process_act_IRQ_rcvd) (int); extern enum xp_retval (*xpc_setup_infrastructure) (struct xpc_partition *); extern void (*xpc_teardown_infrastructure) (struct xpc_partition *); +extern void (*xpc_mark_partition_engaged) (struct xpc_partition *); +extern void (*xpc_mark_partition_disengaged) (struct xpc_partition *); +extern void (*xpc_request_partition_disengage) (struct xpc_partition *); +extern void (*xpc_cancel_partition_disengage_request) (struct xpc_partition *); +extern u64 (*xpc_partition_engaged) (u64); +extern u64 (*xpc_partition_disengage_requested) (u64);; +extern void (*xpc_clear_partition_engaged) (u64); +extern void (*xpc_clear_partition_disengage_request) (u64); + +extern void (*xpc_IPI_send_local_activate) (int); +extern void (*xpc_IPI_send_activated) (struct xpc_partition *); +extern void (*xpc_IPI_send_local_reactivate) (int); +extern void (*xpc_IPI_send_disengage) (struct xpc_partition *); + +extern void (*xpc_IPI_send_closerequest) (struct xpc_channel *, + unsigned long *); +extern void (*xpc_IPI_send_closereply) (struct xpc_channel *, unsigned long *); +extern void (*xpc_IPI_send_openrequest) (struct xpc_channel *, unsigned long *); +extern void (*xpc_IPI_send_openreply) (struct xpc_channel *, unsigned long *); + +extern enum xp_retval (*xpc_allocate_msg) (struct xpc_channel *, u32, + struct xpc_msg **); +extern enum xp_retval (*xpc_send_msg) (struct xpc_channel *, struct xpc_msg *, + u8, xpc_notify_func, void *); +extern void (*xpc_received_msg) (struct xpc_channel *, struct xpc_msg *); /* found in xpc_sn2.c */ extern void xpc_init_sn2(void); -extern struct xpc_vars *xpc_vars; /*>>> eliminate from here */ /* found in xpc_uv.c */ extern void xpc_init_uv(void); @@ -646,6 +660,7 @@ extern void xpc_init_uv(void); extern int xpc_exiting; extern int xp_nasid_mask_words; extern struct xpc_rsvd_page *xpc_rsvd_page; +extern u64 *xpc_mach_nasids; extern struct xpc_partition *xpc_partitions; extern char *xpc_remote_copy_buffer; extern void *xpc_remote_copy_buffer_base; @@ -658,7 +673,8 @@ extern int xpc_partition_disengaged(struct xpc_partition *); extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *); extern void xpc_mark_partition_inactive(struct xpc_partition *); extern void xpc_discovery(void); -extern void xpc_check_remote_hb(void); +extern enum xp_retval xpc_get_remote_rp(int, u64 *, struct xpc_rsvd_page *, + u64 *); extern void xpc_deactivate_partition(const int, struct xpc_partition *, enum xp_retval); extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *); @@ -667,6 +683,7 @@ extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *); extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **); extern void xpc_initiate_connect(int); extern void xpc_initiate_disconnect(int); +extern enum xp_retval xpc_allocate_msg_wait(struct xpc_channel *); extern enum xp_retval xpc_initiate_allocate(short, int, u32, void **); extern enum xp_retval xpc_initiate_send(short, int, void *); extern enum xp_retval xpc_initiate_send_notify(short, int, void *, @@ -680,6 +697,40 @@ extern void xpc_disconnect_channel(const int, struct xpc_channel *, extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval); extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval); +static inline int +xpc_hb_allowed(short partid, void *heartbeating_to_mask) +{ + return test_bit(partid, heartbeating_to_mask); +} + +static inline int +xpc_any_hbs_allowed(void) +{ + DBUG_ON(xpc_heartbeating_to_mask == NULL); + return !bitmap_empty(xpc_heartbeating_to_mask, xp_max_npartitions); +} + +static inline void +xpc_allow_hb(short partid) +{ + DBUG_ON(xpc_heartbeating_to_mask == NULL); + set_bit(partid, xpc_heartbeating_to_mask); +} + +static inline void +xpc_disallow_hb(short partid) +{ + DBUG_ON(xpc_heartbeating_to_mask == NULL); + clear_bit(partid, xpc_heartbeating_to_mask); +} + +static inline void +xpc_disallow_all_hbs(void) +{ + DBUG_ON(xpc_heartbeating_to_mask == NULL); + bitmap_zero(xpc_heartbeating_to_mask, xp_max_npartitions); +} + static inline void xpc_wakeup_channel_mgr(struct xpc_partition *part) { @@ -749,297 +800,7 @@ xpc_part_ref(struct xpc_partition *part) } /* - * This next set of inlines are used to keep track of when a partition is - * potentially engaged in accessing memory belonging to another partition. - */ - -static inline void -xpc_mark_partition_engaged(struct xpc_partition *part) -{ - unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + - (XPC_ENGAGED_PARTITIONS_AMO * - sizeof(AMO_t))); - - local_irq_save(irq_flags); - - /* set bit corresponding to our partid in remote partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, - (1UL << sn_partition_id)); - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> - variable), - xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); -} - -static inline void -xpc_mark_partition_disengaged(struct xpc_partition *part) -{ - unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + - (XPC_ENGAGED_PARTITIONS_AMO * - sizeof(AMO_t))); - - local_irq_save(irq_flags); - - /* clear bit corresponding to our partid in remote partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~(1UL << sn_partition_id)); - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> - variable), - xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); -} - -static inline void -xpc_request_partition_disengage(struct xpc_partition *part) -{ - unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + - (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); - - local_irq_save(irq_flags); - - /* set bit corresponding to our partid in remote partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, - (1UL << sn_partition_id)); - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> - variable), - xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); -} - -static inline void -xpc_cancel_partition_disengage_request(struct xpc_partition *part) -{ - unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + - (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); - - local_irq_save(irq_flags); - - /* clear bit corresponding to our partid in remote partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~(1UL << sn_partition_id)); - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> - variable), - xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); -} - -static inline u64 -xpc_partition_engaged(u64 partid_mask) -{ - AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; - - /* return our partition's AMO variable ANDed with partid_mask */ - return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & - partid_mask); -} - -static inline u64 -xpc_partition_disengage_requested(u64 partid_mask) -{ - AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; - - /* return our partition's AMO variable ANDed with partid_mask */ - return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & - partid_mask); -} - -static inline void -xpc_clear_partition_engaged(u64 partid_mask) -{ - AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; - - /* clear bit(s) based on partid_mask in our partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~partid_mask); -} - -static inline void -xpc_clear_partition_disengage_request(u64 partid_mask) -{ - AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; - - /* clear bit(s) based on partid_mask in our partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~partid_mask); -} - -/* - * The following set of macros and inlines are used for the sending and - * receiving of IPIs (also known as IRQs). There are two flavors of IPIs, - * one that is associated with partition activity (SGI_XPC_ACTIVATE) and - * the other that is associated with channel activity (SGI_XPC_NOTIFY). - */ - -static inline u64 -xpc_IPI_receive(AMO_t *amo) -{ - return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR); -} - -static inline enum xp_retval -xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector) -{ - int ret = 0; - unsigned long irq_flags; - - local_irq_save(irq_flags); - - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag); - sn_send_IPI_phys(nasid, phys_cpuid, vector, 0); - - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable), - xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); - - return ((ret == 0) ? xpSuccess : xpPioReadError); -} - -/* - * IPIs associated with SGI_XPC_ACTIVATE IRQ. - */ - -/* - * Flag the appropriate AMO variable and send an IPI to the specified node. - */ -static inline void -xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid, - int to_phys_cpuid) -{ - int w_index = XPC_NASID_W_INDEX(from_nasid); - int b_index = XPC_NASID_B_INDEX(from_nasid); - AMO_t *amos = (AMO_t *)__va(amos_page_pa + - (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t))); - - (void)xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid, - to_phys_cpuid, SGI_XPC_ACTIVATE); -} - -static inline void -xpc_IPI_send_activate(struct xpc_vars *vars) -{ - xpc_activate_IRQ_send(vars->amos_page_pa, cnodeid_to_nasid(0), - vars->act_nasid, vars->act_phys_cpuid); -} - -static inline void -xpc_IPI_send_activated(struct xpc_partition *part) -{ - xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0), - part->remote_act_nasid, - part->remote_act_phys_cpuid); -} - -static inline void -xpc_IPI_send_reactivate(struct xpc_partition *part) -{ - xpc_activate_IRQ_send(xpc_vars->amos_page_pa, part->reactivate_nasid, - xpc_vars->act_nasid, xpc_vars->act_phys_cpuid); -} - -static inline void -xpc_IPI_send_disengage(struct xpc_partition *part) -{ - xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0), - part->remote_act_nasid, - part->remote_act_phys_cpuid); -} - -/* - * IPIs associated with SGI_XPC_NOTIFY IRQ. - */ - -/* - * Send an IPI to the remote partition that is associated with the - * specified channel. - */ -#define XPC_NOTIFY_IRQ_SEND(_ch, _ipi_f, _irq_f) \ - xpc_notify_IRQ_send(_ch, _ipi_f, #_ipi_f, _irq_f) - -static inline void -xpc_notify_IRQ_send(struct xpc_channel *ch, u8 ipi_flag, char *ipi_flag_string, - unsigned long *irq_flags) -{ - struct xpc_partition *part = &xpc_partitions[ch->partid]; - enum xp_retval ret; - - if (likely(part->act_state != XPC_P_DEACTIVATING)) { - ret = xpc_IPI_send(part->remote_IPI_amo_va, - (u64)ipi_flag << (ch->number * 8), - part->remote_IPI_nasid, - part->remote_IPI_phys_cpuid, SGI_XPC_NOTIFY); - dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n", - ipi_flag_string, ch->partid, ch->number, ret); - if (unlikely(ret != xpSuccess)) { - if (irq_flags != NULL) - spin_unlock_irqrestore(&ch->lock, *irq_flags); - XPC_DEACTIVATE_PARTITION(part, ret); - if (irq_flags != NULL) - spin_lock_irqsave(&ch->lock, *irq_flags); - } - } -} - -/* - * Make it look like the remote partition, which is associated with the - * specified channel, sent us an IPI. This faked IPI will be handled - * by xpc_dropped_IPI_check(). - */ -#define XPC_NOTIFY_IRQ_SEND_LOCAL(_ch, _ipi_f) \ - xpc_notify_IRQ_send_local(_ch, _ipi_f, #_ipi_f) - -static inline void -xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag, - char *ipi_flag_string) -{ - struct xpc_partition *part = &xpc_partitions[ch->partid]; - - FETCHOP_STORE_OP(TO_AMO((u64)&part->local_IPI_amo_va->variable), - FETCHOP_OR, ((u64)ipi_flag << (ch->number * 8))); - dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n", - ipi_flag_string, ch->partid, ch->number); -} - -/* - * The sending and receiving of IPIs includes the setting of an AMO variable + * The sending and receiving of IPIs includes the setting of an >>>AMO variable * to indicate the reason the IPI was sent. The 64-bit variable is divided * up into eight bytes, ordered from right to left. Byte zero pertains to * channel 0, byte one to channel 1, and so on. Each byte is described by @@ -1052,107 +813,11 @@ xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag, #define XPC_IPI_OPENREPLY 0x08 #define XPC_IPI_MSGREQUEST 0x10 -/* given an AMO variable and a channel#, get its associated IPI flags */ +/* given an >>>AMO variable and a channel#, get its associated IPI flags */ #define XPC_GET_IPI_FLAGS(_amo, _c) ((u8) (((_amo) >> ((_c) * 8)) & 0xff)) #define XPC_SET_IPI_FLAGS(_amo, _c, _f) (_amo) |= ((u64) (_f) << ((_c) * 8)) #define XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0fUL) #define XPC_ANY_MSG_IPI_FLAGS_SET(_amo) ((_amo) & 0x1010101010101010UL) -static inline void -xpc_IPI_send_closerequest(struct xpc_channel *ch, unsigned long *irq_flags) -{ - struct xpc_openclose_args *args = ch->local_openclose_args; - - args->reason = ch->reason; - - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREQUEST, irq_flags); -} - -static inline void -xpc_IPI_send_closereply(struct xpc_channel *ch, unsigned long *irq_flags) -{ - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREPLY, irq_flags); -} - -static inline void -xpc_IPI_send_openrequest(struct xpc_channel *ch, unsigned long *irq_flags) -{ - struct xpc_openclose_args *args = ch->local_openclose_args; - - args->msg_size = ch->msg_size; - args->local_nentries = ch->local_nentries; - - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREQUEST, irq_flags); -} - -static inline void -xpc_IPI_send_openreply(struct xpc_channel *ch, unsigned long *irq_flags) -{ - struct xpc_openclose_args *args = ch->local_openclose_args; - - args->remote_nentries = ch->remote_nentries; - args->local_nentries = ch->local_nentries; - args->local_msgqueue_pa = __pa(ch->local_msgqueue); - - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREPLY, irq_flags); -} - -static inline void -xpc_IPI_send_msgrequest(struct xpc_channel *ch) -{ - XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_MSGREQUEST, NULL); -} - -static inline void -xpc_IPI_send_local_msgrequest(struct xpc_channel *ch) -{ - XPC_NOTIFY_IRQ_SEND_LOCAL(ch, XPC_IPI_MSGREQUEST); -} - -/* ->>> this block comment needs to be moved and re-written. - * Memory for XPC's AMO variables is allocated by the MSPEC driver. These - * pages are located in the lowest granule. The lowest granule uses 4k pages - * for cached references and an alternate TLB handler to never provide a - * cacheable mapping for the entire region. This will prevent speculative - * reading of cached copies of our lines from being issued which will cause - * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 - * AMO variables (based on xp_max_npartitions) for message notification and an - * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition - * activation and 2 AMO variables for partition deactivation. - */ -static inline AMO_t * -xpc_IPI_init(int index) -{ - AMO_t *amo = xpc_vars->amos_page + index; - - (void)xpc_IPI_receive(amo); /* clear AMO variable */ - return amo; -} - -/* - * Check to see if there is any channel activity to/from the specified - * partition. - */ -static inline void -xpc_check_for_channel_activity(struct xpc_partition *part) -{ - u64 IPI_amo; - unsigned long irq_flags; - - IPI_amo = xpc_IPI_receive(part->local_IPI_amo_va); - if (IPI_amo == 0) - return; - - spin_lock_irqsave(&part->IPI_lock, irq_flags); - part->local_IPI_amo |= IPI_amo; - spin_unlock_irqrestore(&part->IPI_lock, irq_flags); - - dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n", - XPC_PARTID(part), IPI_amo); - - xpc_wakeup_channel_mgr(part); -} - #endif /* _DRIVERS_MISC_SGIXP_XPC_H */ diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 8081e8155df..26c5e12c122 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -1165,7 +1165,7 @@ xpc_disconnect_callout(struct xpc_channel *ch, enum xp_retval reason) * Wait for a message entry to become available for the specified channel, * but don't wait any longer than 1 jiffy. */ -static enum xp_retval +enum xp_retval xpc_allocate_msg_wait(struct xpc_channel *ch) { enum xp_retval ret; @@ -1191,96 +1191,6 @@ xpc_allocate_msg_wait(struct xpc_channel *ch) return ret; } -/* - * Allocate an entry for a message from the message queue associated with the - * specified channel. - */ -static enum xp_retval -xpc_allocate_msg(struct xpc_channel *ch, u32 flags, - struct xpc_msg **address_of_msg) -{ - struct xpc_msg *msg; - enum xp_retval ret; - s64 put; - - /* this reference will be dropped in xpc_send_msg() */ - xpc_msgqueue_ref(ch); - - if (ch->flags & XPC_C_DISCONNECTING) { - xpc_msgqueue_deref(ch); - return ch->reason; - } - if (!(ch->flags & XPC_C_CONNECTED)) { - xpc_msgqueue_deref(ch); - return xpNotConnected; - } - - /* - * Get the next available message entry from the local message queue. - * If none are available, we'll make sure that we grab the latest - * GP values. - */ - ret = xpTimeout; - - while (1) { - - put = ch->w_local_GP.put; - rmb(); /* guarantee that .put loads before .get */ - if (put - ch->w_remote_GP.get < ch->local_nentries) { - - /* There are available message entries. We need to try - * to secure one for ourselves. We'll do this by trying - * to increment w_local_GP.put as long as someone else - * doesn't beat us to it. If they do, we'll have to - * try again. - */ - if (cmpxchg(&ch->w_local_GP.put, put, put + 1) == put) { - /* we got the entry referenced by put */ - break; - } - continue; /* try again */ - } - - /* - * There aren't any available msg entries at this time. - * - * In waiting for a message entry to become available, - * we set a timeout in case the other side is not - * sending completion IPIs. This lets us fake an IPI - * that will cause the IPI handler to fetch the latest - * GP values as if an IPI was sent by the other side. - */ - if (ret == xpTimeout) - xpc_IPI_send_local_msgrequest(ch); - - if (flags & XPC_NOWAIT) { - xpc_msgqueue_deref(ch); - return xpNoWait; - } - - ret = xpc_allocate_msg_wait(ch); - if (ret != xpInterrupted && ret != xpTimeout) { - xpc_msgqueue_deref(ch); - return ret; - } - } - - /* get the message's address and initialize it */ - msg = (struct xpc_msg *)((u64)ch->local_msgqueue + - (put % ch->local_nentries) * ch->msg_size); - - DBUG_ON(msg->flags != 0); - msg->number = put; - - dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, " - "msg_number=%ld, partid=%d, channel=%d\n", put + 1, - (void *)msg, msg->number, ch->partid, ch->number); - - *address_of_msg = msg; - - return xpSuccess; -} - /* * Allocate an entry for a message from the message queue associated with the * specified channel. NOTE that this routine can sleep waiting for a message @@ -1317,144 +1227,6 @@ xpc_initiate_allocate(short partid, int ch_number, u32 flags, void **payload) return ret; } -/* - * Now we actually send the messages that are ready to be sent by advancing - * the local message queue's Put value and then send an IPI to the recipient - * partition. - */ -static void -xpc_send_msgs(struct xpc_channel *ch, s64 initial_put) -{ - struct xpc_msg *msg; - s64 put = initial_put + 1; - int send_IPI = 0; - - while (1) { - - while (1) { - if (put == ch->w_local_GP.put) - break; - - msg = (struct xpc_msg *)((u64)ch->local_msgqueue + - (put % ch->local_nentries) * - ch->msg_size); - - if (!(msg->flags & XPC_M_READY)) - break; - - put++; - } - - if (put == initial_put) { - /* nothing's changed */ - break; - } - - if (cmpxchg_rel(&ch->local_GP->put, initial_put, put) != - initial_put) { - /* someone else beat us to it */ - DBUG_ON(ch->local_GP->put < initial_put); - break; - } - - /* we just set the new value of local_GP->put */ - - dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, " - "channel=%d\n", put, ch->partid, ch->number); - - send_IPI = 1; - - /* - * We need to ensure that the message referenced by - * local_GP->put is not XPC_M_READY or that local_GP->put - * equals w_local_GP.put, so we'll go have a look. - */ - initial_put = put; - } - - if (send_IPI) - xpc_IPI_send_msgrequest(ch); -} - -/* - * Common code that does the actual sending of the message by advancing the - * local message queue's Put value and sends an IPI to the partition the - * message is being sent to. - */ -static enum xp_retval -xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type, - xpc_notify_func func, void *key) -{ - enum xp_retval ret = xpSuccess; - struct xpc_notify *notify = notify; - s64 put, msg_number = msg->number; - - DBUG_ON(notify_type == XPC_N_CALL && func == NULL); - DBUG_ON((((u64)msg - (u64)ch->local_msgqueue) / ch->msg_size) != - msg_number % ch->local_nentries); - DBUG_ON(msg->flags & XPC_M_READY); - - if (ch->flags & XPC_C_DISCONNECTING) { - /* drop the reference grabbed in xpc_allocate_msg() */ - xpc_msgqueue_deref(ch); - return ch->reason; - } - - if (notify_type != 0) { - /* - * Tell the remote side to send an ACK interrupt when the - * message has been delivered. - */ - msg->flags |= XPC_M_INTERRUPT; - - atomic_inc(&ch->n_to_notify); - - notify = &ch->notify_queue[msg_number % ch->local_nentries]; - notify->func = func; - notify->key = key; - notify->type = notify_type; - - /* >>> is a mb() needed here? */ - - if (ch->flags & XPC_C_DISCONNECTING) { - /* - * An error occurred between our last error check and - * this one. We will try to clear the type field from - * the notify entry. If we succeed then - * xpc_disconnect_channel() didn't already process - * the notify entry. - */ - if (cmpxchg(¬ify->type, notify_type, 0) == - notify_type) { - atomic_dec(&ch->n_to_notify); - ret = ch->reason; - } - - /* drop the reference grabbed in xpc_allocate_msg() */ - xpc_msgqueue_deref(ch); - return ret; - } - } - - msg->flags |= XPC_M_READY; - - /* - * The preceding store of msg->flags must occur before the following - * load of ch->local_GP->put. - */ - mb(); - - /* see if the message is next in line to be sent, if so send it */ - - put = ch->local_GP->put; - if (put == msg_number) - xpc_send_msgs(ch, put); - - /* drop the reference grabbed in xpc_allocate_msg() */ - xpc_msgqueue_deref(ch); - return ret; -} - /* * Send a message previously allocated using xpc_initiate_allocate() on the * specified channel connected to the specified partition. @@ -1585,66 +1357,6 @@ xpc_deliver_msg(struct xpc_channel *ch) } } -/* - * Now we actually acknowledge the messages that have been delivered and ack'd - * by advancing the cached remote message queue's Get value and if requested - * send an IPI to the message sender's partition. - */ -static void -xpc_acknowledge_msgs(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) -{ - struct xpc_msg *msg; - s64 get = initial_get + 1; - int send_IPI = 0; - - while (1) { - - while (1) { - if (get == ch->w_local_GP.get) - break; - - msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + - (get % ch->remote_nentries) * - ch->msg_size); - - if (!(msg->flags & XPC_M_DONE)) - break; - - msg_flags |= msg->flags; - get++; - } - - if (get == initial_get) { - /* nothing's changed */ - break; - } - - if (cmpxchg_rel(&ch->local_GP->get, initial_get, get) != - initial_get) { - /* someone else beat us to it */ - DBUG_ON(ch->local_GP->get <= initial_get); - break; - } - - /* we just set the new value of local_GP->get */ - - dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, " - "channel=%d\n", get, ch->partid, ch->number); - - send_IPI = (msg_flags & XPC_M_INTERRUPT); - - /* - * We need to ensure that the message referenced by - * local_GP->get is not XPC_M_DONE or that local_GP->get - * equals w_local_GP.get, so we'll go have a look. - */ - initial_get = get; - } - - if (send_IPI) - xpc_IPI_send_msgrequest(ch); -} - /* * Acknowledge receipt of a delivered message. * @@ -1668,35 +1380,12 @@ xpc_initiate_received(short partid, int ch_number, void *payload) struct xpc_partition *part = &xpc_partitions[partid]; struct xpc_channel *ch; struct xpc_msg *msg = XPC_MSG_ADDRESS(payload); - s64 get, msg_number = msg->number; DBUG_ON(partid < 0 || partid >= xp_max_npartitions); DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); ch = &part->channels[ch_number]; - - dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n", - (void *)msg, msg_number, ch->partid, ch->number); - - DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->msg_size) != - msg_number % ch->remote_nentries); - DBUG_ON(msg->flags & XPC_M_DONE); - - msg->flags |= XPC_M_DONE; - - /* - * The preceding store of msg->flags must occur before the following - * load of ch->local_GP->get. - */ - mb(); - - /* - * See if this message is next in line to be acknowledged as having - * been delivered. - */ - get = ch->local_GP->get; - if (get == msg_number) - xpc_acknowledge_msgs(ch, get, msg->flags); + xpc_received_msg(ch, msg); /* the call to xpc_msgqueue_ref() was done by xpc_deliver_msg() */ xpc_msgqueue_deref(ch); diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index be3a4853930..10dac3652b2 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -148,12 +148,14 @@ static struct ctl_table_header *xpc_sysctl; int xpc_disengage_request_timedout; /* #of IRQs received */ -static atomic_t xpc_act_IRQ_rcvd; +atomic_t xpc_act_IRQ_rcvd; /* IRQ handler notifies this wait queue on receipt of an IRQ */ -static DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq); +DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq); static unsigned long xpc_hb_check_timeout; +static struct timer_list xpc_hb_timer; +void *xpc_heartbeating_to_mask; /* notification that the xpc_hb_checker thread has exited */ static DECLARE_COMPLETION(xpc_hb_checker_exited); @@ -161,8 +163,6 @@ static DECLARE_COMPLETION(xpc_hb_checker_exited); /* notification that the xpc_discovery thread has exited */ static DECLARE_COMPLETION(xpc_discovery_exited); -static struct timer_list xpc_hb_timer; - static void xpc_kthread_waitmsgs(struct xpc_partition *, struct xpc_channel *); static int xpc_system_reboot(struct notifier_block *, unsigned long, void *); @@ -176,12 +176,54 @@ static struct notifier_block xpc_die_notifier = { }; enum xp_retval (*xpc_rsvd_page_init) (struct xpc_rsvd_page *rp); +void (*xpc_heartbeat_init) (void); +void (*xpc_heartbeat_exit) (void); +void (*xpc_increment_heartbeat) (void); +void (*xpc_offline_heartbeat) (void); +void (*xpc_online_heartbeat) (void); +void (*xpc_check_remote_hb) (void); + enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part); u64 (*xpc_get_IPI_flags) (struct xpc_partition *part); struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *ch); + +void (*xpc_initiate_partition_activation) (struct xpc_rsvd_page *remote_rp, + u64 remote_rp_pa, int nasid); + +void (*xpc_process_act_IRQ_rcvd) (int n_IRQs_expected); enum xp_retval (*xpc_setup_infrastructure) (struct xpc_partition *part); void (*xpc_teardown_infrastructure) (struct xpc_partition *part); +void (*xpc_mark_partition_engaged) (struct xpc_partition *part); +void (*xpc_mark_partition_disengaged) (struct xpc_partition *part); +void (*xpc_request_partition_disengage) (struct xpc_partition *part); +void (*xpc_cancel_partition_disengage_request) (struct xpc_partition *part); +u64 (*xpc_partition_engaged) (u64 partid_mask); +u64 (*xpc_partition_disengage_requested) (u64 partid_mask); +void (*xpc_clear_partition_engaged) (u64 partid_mask); +void (*xpc_clear_partition_disengage_request) (u64 partid_mask); + +void (*xpc_IPI_send_local_activate) (int from_nasid); +void (*xpc_IPI_send_activated) (struct xpc_partition *part); +void (*xpc_IPI_send_local_reactivate) (int from_nasid); +void (*xpc_IPI_send_disengage) (struct xpc_partition *part); + +void (*xpc_IPI_send_closerequest) (struct xpc_channel *ch, + unsigned long *irq_flags); +void (*xpc_IPI_send_closereply) (struct xpc_channel *ch, + unsigned long *irq_flags); +void (*xpc_IPI_send_openrequest) (struct xpc_channel *ch, + unsigned long *irq_flags); +void (*xpc_IPI_send_openreply) (struct xpc_channel *ch, + unsigned long *irq_flags); + +enum xp_retval (*xpc_allocate_msg) (struct xpc_channel *ch, u32 flags, + struct xpc_msg **address_of_msg); + +enum xp_retval (*xpc_send_msg) (struct xpc_channel *ch, struct xpc_msg *msg, + u8 notify_type, xpc_notify_func func, + void *key); +void (*xpc_received_msg) (struct xpc_channel *ch, struct xpc_msg *msg); /* * Timer function to enforce the timelimit on the partition disengage request. @@ -218,7 +260,7 @@ xpc_act_IRQ_handler(int irq, void *dev_id) static void xpc_hb_beater(unsigned long dummy) { - xpc_vars->heartbeat++; + xpc_increment_heartbeat(); if (time_after_eq(jiffies, xpc_hb_check_timeout)) wake_up_interruptible(&xpc_act_IRQ_wq); @@ -227,6 +269,22 @@ xpc_hb_beater(unsigned long dummy) add_timer(&xpc_hb_timer); } +static void +xpc_start_hb_beater(void) +{ + xpc_heartbeat_init(); + init_timer(&xpc_hb_timer); + xpc_hb_timer.function = xpc_hb_beater; + xpc_hb_beater(0); +} + +static void +xpc_stop_hb_beater(void) +{ + del_timer_sync(&xpc_hb_timer); + xpc_heartbeat_exit(); +} + /* * This thread is responsible for nearly all of the partition * activation/deactivation. @@ -244,7 +302,7 @@ xpc_hb_checker(void *ignore) /* set our heartbeating to other partitions into motion */ xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ); - xpc_hb_beater(0); + xpc_start_hb_beater(); while (!xpc_exiting) { @@ -274,11 +332,8 @@ xpc_hb_checker(void *ignore) dev_dbg(xpc_part, "found an IRQ to process; will be " "resetting xpc_hb_check_timeout\n"); - last_IRQ_count += xpc_identify_act_IRQ_sender(); - if (last_IRQ_count < new_IRQ_count) { - /* retry once to help avoid missing AMO */ - (void)xpc_identify_act_IRQ_sender(); - } + xpc_process_act_IRQ_rcvd(new_IRQ_count - + last_IRQ_count); last_IRQ_count = new_IRQ_count; xpc_hb_check_timeout = jiffies + @@ -294,6 +349,8 @@ xpc_hb_checker(void *ignore) xpc_exiting)); } + xpc_stop_hb_beater(); + dev_dbg(xpc_part, "heartbeat checker is exiting\n"); /* mark this thread as having exited */ @@ -401,31 +458,7 @@ xpc_activating(void *__partid) dev_dbg(xpc_part, "activating partition %d\n", partid); - /* - * Register the remote partition's AMOs with SAL so it can handle - * and cleanup errors within that address range should the remote - * partition go down. We don't unregister this range because it is - * difficult to tell when outstanding writes to the remote partition - * are finished and thus when it is safe to unregister. This should - * not result in wasted space in the SAL xp_addr_region table because - * we should get the same page for remote_amos_page_pa after module - * reloads and system reboots. - */ - if (sn_register_xp_addr_region(part->remote_amos_page_pa, - PAGE_SIZE, 1) < 0) { - dev_warn(xpc_part, "xpc_activating(%d) failed to register " - "xp_addr region\n", partid); - - spin_lock_irqsave(&part->act_lock, irq_flags); - part->act_state = XPC_P_INACTIVE; - XPC_SET_REASON(part, xpPhysAddrRegFailed, __LINE__); - spin_unlock_irqrestore(&part->act_lock, irq_flags); - part->remote_rp_pa = 0; - return 0; - } - - xpc_allow_hb(partid, xpc_vars); - xpc_IPI_send_activated(part); + xpc_allow_hb(partid); if (xpc_setup_infrastructure(part) == xpSuccess) { (void)xpc_part_ref(part); /* this will always succeed */ @@ -440,12 +473,12 @@ xpc_activating(void *__partid) xpc_teardown_infrastructure(part); } - xpc_disallow_hb(partid, xpc_vars); + xpc_disallow_hb(partid); xpc_mark_partition_inactive(part); if (part->reason == xpReactivating) { /* interrupting ourselves results in activating partition */ - xpc_IPI_send_reactivate(part); + xpc_IPI_send_local_reactivate(part->reactivate_nasid); } return 0; @@ -477,6 +510,32 @@ xpc_activate_partition(struct xpc_partition *part) } } +/* + * Check to see if there is any channel activity to/from the specified + * partition. + */ +static void +xpc_check_for_channel_activity(struct xpc_partition *part) +{ + u64 IPI_amo; + unsigned long irq_flags; + +/* this needs to be uncommented, but I'm thinking this function and the */ +/* ones that call it need to be moved into xpc_sn2.c... */ + IPI_amo = 0; /* = xpc_IPI_receive(part->local_IPI_amo_va); */ + if (IPI_amo == 0) + return; + + spin_lock_irqsave(&part->IPI_lock, irq_flags); + part->local_IPI_amo |= IPI_amo; + spin_unlock_irqrestore(&part->IPI_lock, irq_flags); + + dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n", + XPC_PARTID(part), IPI_amo); + + xpc_wakeup_channel_mgr(part); +} + /* * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more @@ -902,14 +961,11 @@ xpc_do_exit(enum xp_retval reason) } while (1); DBUG_ON(xpc_partition_engaged(-1UL)); + DBUG_ON(xpc_any_hbs_allowed() != 0); /* indicate to others that our reserved page is uninitialized */ xpc_rsvd_page->stamp = ZERO_STAMP; - /* now it's time to eliminate our heartbeat */ - del_timer_sync(&xpc_hb_timer); - DBUG_ON(xpc_vars->heartbeating_to_mask != 0); - if (reason == xpUnloading) { (void)unregister_die_notifier(&xpc_die_notifier); (void)unregister_reboot_notifier(&xpc_reboot_notifier); @@ -968,7 +1024,7 @@ xpc_die_disengage(void) /* keep xpc_hb_checker thread from doing anything (just in case) */ xpc_exiting = 1; - xpc_vars->heartbeating_to_mask = 0; /* indicate we're deactivated */ + xpc_disallow_all_hbs(); /*indicate we're deactivated */ for (partid = 0; partid < xp_max_npartitions; partid++) { part = &xpc_partitions[partid]; @@ -1054,8 +1110,7 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) /* fall through */ case DIE_MCA_MONARCH_ENTER: case DIE_INIT_MONARCH_ENTER: - xpc_vars->heartbeat++; - xpc_vars->heartbeat_offline = 1; + xpc_offline_heartbeat(); break; case DIE_KDEBUG_LEAVE: @@ -1066,8 +1121,7 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) /* fall through */ case DIE_MCA_MONARCH_LEAVE: case DIE_INIT_MONARCH_LEAVE: - xpc_vars->heartbeat++; - xpc_vars->heartbeat_offline = 0; + xpc_online_heartbeat(); break; } @@ -1202,9 +1256,6 @@ xpc_init(void) if (ret != 0) dev_warn(xpc_part, "can't register die notifier\n"); - init_timer(&xpc_hb_timer); - xpc_hb_timer.function = xpc_hb_beater; - /* * The real work-horse behind xpc. This processes incoming * interrupts and monitors remote heartbeats. @@ -1246,7 +1297,6 @@ out_4: /* indicate to others that our reserved page is uninitialized */ xpc_rsvd_page->stamp = ZERO_STAMP; - del_timer_sync(&xpc_hb_timer); (void)unregister_die_notifier(&xpc_die_notifier); (void)unregister_reboot_notifier(&xpc_reboot_notifier); out_3: diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index be5b7547dab..4e14effdedd 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -42,7 +42,7 @@ u64 xpc_prot_vec[MAX_NUMNODES]; /* this partition's reserved page pointers */ struct xpc_rsvd_page *xpc_rsvd_page; static u64 *xpc_part_nasids; -static u64 *xpc_mach_nasids; +u64 *xpc_mach_nasids; /* >>> next two variables should be 'xpc_' if they remain here */ static int xp_sizeof_nasid_mask; /* actual size in bytes of nasid mask */ @@ -317,62 +317,6 @@ xpc_restrict_IPI_ops(void) } } -/* - * At periodic intervals, scan through all active partitions and ensure - * their heartbeat is still active. If not, the partition is deactivated. - */ -void -xpc_check_remote_hb(void) -{ - struct xpc_vars *remote_vars; - struct xpc_partition *part; - short partid; - enum xp_retval ret; - - remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer; - - for (partid = 0; partid < xp_max_npartitions; partid++) { - - if (xpc_exiting) - break; - - if (partid == sn_partition_id) - continue; - - part = &xpc_partitions[partid]; - - if (part->act_state == XPC_P_INACTIVE || - part->act_state == XPC_P_DEACTIVATING) { - continue; - } - - /* pull the remote_hb cache line */ - ret = xp_remote_memcpy(remote_vars, - (void *)part->remote_vars_pa, - XPC_RP_VARS_SIZE); - if (ret != xpSuccess) { - XPC_DEACTIVATE_PARTITION(part, ret); - continue; - } - - dev_dbg(xpc_part, "partid = %d, heartbeat = %ld, last_heartbeat" - " = %ld, heartbeat_offline = %ld, HB_mask = 0x%lx\n", - partid, remote_vars->heartbeat, part->last_heartbeat, - remote_vars->heartbeat_offline, - remote_vars->heartbeating_to_mask); - - if (((remote_vars->heartbeat == part->last_heartbeat) && - (remote_vars->heartbeat_offline == 0)) || - !xpc_hb_allowed(sn_partition_id, remote_vars)) { - - XPC_DEACTIVATE_PARTITION(part, xpNoHeartbeat); - continue; - } - - part->last_heartbeat = remote_vars->heartbeat; - } -} - /* * Get a copy of a portion of the remote partition's rsvd page. * @@ -380,7 +324,7 @@ xpc_check_remote_hb(void) * is large enough to contain a copy of their reserved page header and * part_nasids mask. */ -static enum xp_retval +enum xp_retval xpc_get_remote_rp(int nasid, u64 *discovered_nasids, struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa) { @@ -431,322 +375,6 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, return xpSuccess; } -/* - * Get a copy of the remote partition's XPC variables from the reserved page. - * - * remote_vars points to a buffer that is cacheline aligned for BTE copies and - * assumed to be of size XPC_RP_VARS_SIZE. - */ -static enum xp_retval -xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars) -{ - enum xp_retval ret; - - if (remote_vars_pa == 0) - return xpVarsNotSet; - - /* pull over the cross partition variables */ - ret = xp_remote_memcpy(remote_vars, (void *)remote_vars_pa, - XPC_RP_VARS_SIZE); - if (ret != xpSuccess) - return ret; - - if (XPC_VERSION_MAJOR(remote_vars->version) != - XPC_VERSION_MAJOR(XPC_V_VERSION)) { - return xpBadVersion; - } - - return xpSuccess; -} - -/* - * Update the remote partition's info. - */ -static void -xpc_update_partition_info(struct xpc_partition *part, u8 remote_rp_version, - struct timespec *remote_rp_stamp, u64 remote_rp_pa, - u64 remote_vars_pa, struct xpc_vars *remote_vars) -{ - part->remote_rp_version = remote_rp_version; - dev_dbg(xpc_part, " remote_rp_version = 0x%016x\n", - part->remote_rp_version); - - part->remote_rp_stamp = *remote_rp_stamp; - dev_dbg(xpc_part, " remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n", - part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec); - - part->remote_rp_pa = remote_rp_pa; - dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa); - - part->remote_vars_pa = remote_vars_pa; - dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n", - part->remote_vars_pa); - - part->last_heartbeat = remote_vars->heartbeat; - dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n", - part->last_heartbeat); - -/* >>> remote_vars_part_pa and vars_part_pa are sn2 only!!! */ - part->remote_vars_part_pa = remote_vars->vars_part_pa; - dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n", - part->remote_vars_part_pa); - - part->remote_act_nasid = remote_vars->act_nasid; - dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n", - part->remote_act_nasid); - - part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid; - dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n", - part->remote_act_phys_cpuid); - - part->remote_amos_page_pa = remote_vars->amos_page_pa; - dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n", - part->remote_amos_page_pa); - - part->remote_vars_version = remote_vars->version; - dev_dbg(xpc_part, " remote_vars_version = 0x%x\n", - part->remote_vars_version); -} - -/* - * Prior code has determined the nasid which generated an IPI. Inspect - * that nasid to determine if its partition needs to be activated or - * deactivated. - * - * A partition is consider "awaiting activation" if our partition - * flags indicate it is not active and it has a heartbeat. A - * partition is considered "awaiting deactivation" if our partition - * flags indicate it is active but it has no heartbeat or it is not - * sending its heartbeat to us. - * - * To determine the heartbeat, the remote nasid must have a properly - * initialized reserved page. - */ -static void -xpc_identify_act_IRQ_req(int nasid) -{ - struct xpc_rsvd_page *remote_rp; - struct xpc_vars *remote_vars; - u64 remote_rp_pa; - u64 remote_vars_pa; - int remote_rp_version; - int reactivate = 0; - int stamp_diff; - struct timespec remote_rp_stamp = { 0, 0 }; /*>>> ZERO_STAMP */ - short partid; - struct xpc_partition *part; - enum xp_retval ret; - - /* pull over the reserved page structure */ - - remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer; - - ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa); - if (ret != xpSuccess) { - dev_warn(xpc_part, "unable to get reserved page from nasid %d, " - "which sent interrupt, reason=%d\n", nasid, ret); - return; - } - - remote_vars_pa = remote_rp->sn.vars_pa; - remote_rp_version = remote_rp->version; - if (XPC_SUPPORTS_RP_STAMP(remote_rp_version)) - remote_rp_stamp = remote_rp->stamp; - - partid = remote_rp->SAL_partid; - part = &xpc_partitions[partid]; - - /* pull over the cross partition variables */ - - remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer; - - ret = xpc_get_remote_vars(remote_vars_pa, remote_vars); - if (ret != xpSuccess) { - - dev_warn(xpc_part, "unable to get XPC variables from nasid %d, " - "which sent interrupt, reason=%d\n", nasid, ret); - - XPC_DEACTIVATE_PARTITION(part, ret); - return; - } - - part->act_IRQ_rcvd++; - - dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = " - "%ld:0x%lx\n", (int)nasid, (int)partid, part->act_IRQ_rcvd, - remote_vars->heartbeat, remote_vars->heartbeating_to_mask); - - if (xpc_partition_disengaged(part) && - part->act_state == XPC_P_INACTIVE) { - - xpc_update_partition_info(part, remote_rp_version, - &remote_rp_stamp, remote_rp_pa, - remote_vars_pa, remote_vars); - - if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) { - if (xpc_partition_disengage_requested(1UL << partid)) { - /* - * Other side is waiting on us to disengage, - * even though we already have. - */ - return; - } - } else { - /* other side doesn't support disengage requests */ - xpc_clear_partition_disengage_request(1UL << partid); - } - - xpc_activate_partition(part); - return; - } - - DBUG_ON(part->remote_rp_version == 0); - DBUG_ON(part->remote_vars_version == 0); - - if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) { - DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part-> - remote_vars_version)); - - if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { - DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars-> - version)); - /* see if the other side rebooted */ - if (part->remote_amos_page_pa == - remote_vars->amos_page_pa && - xpc_hb_allowed(sn_partition_id, remote_vars)) { - /* doesn't look that way, so ignore the IPI */ - return; - } - } - - /* - * Other side rebooted and previous XPC didn't support the - * disengage request, so we don't need to do anything special. - */ - - xpc_update_partition_info(part, remote_rp_version, - &remote_rp_stamp, remote_rp_pa, - remote_vars_pa, remote_vars); - part->reactivate_nasid = nasid; - XPC_DEACTIVATE_PARTITION(part, xpReactivating); - return; - } - - DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)); - - if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { - DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); - - /* - * Other side rebooted and previous XPC did support the - * disengage request, but the new one doesn't. - */ - - xpc_clear_partition_engaged(1UL << partid); - xpc_clear_partition_disengage_request(1UL << partid); - - xpc_update_partition_info(part, remote_rp_version, - &remote_rp_stamp, remote_rp_pa, - remote_vars_pa, remote_vars); - reactivate = 1; - - } else { - DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); - - stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp, - &remote_rp_stamp); - if (stamp_diff != 0) { - DBUG_ON(stamp_diff >= 0); - - /* - * Other side rebooted and the previous XPC did support - * the disengage request, as does the new one. - */ - - DBUG_ON(xpc_partition_engaged(1UL << partid)); - DBUG_ON(xpc_partition_disengage_requested(1UL << - partid)); - - xpc_update_partition_info(part, remote_rp_version, - &remote_rp_stamp, - remote_rp_pa, remote_vars_pa, - remote_vars); - reactivate = 1; - } - } - - if (part->disengage_request_timeout > 0 && - !xpc_partition_disengaged(part)) { - /* still waiting on other side to disengage from us */ - return; - } - - if (reactivate) { - part->reactivate_nasid = nasid; - XPC_DEACTIVATE_PARTITION(part, xpReactivating); - - } else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) && - xpc_partition_disengage_requested(1UL << partid)) { - XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown); - } -} - -/* - * Loop through the activation AMO variables and process any bits - * which are set. Each bit indicates a nasid sending a partition - * activation or deactivation request. - * - * Return #of IRQs detected. - */ -int -xpc_identify_act_IRQ_sender(void) -{ - int word, bit; - u64 nasid_mask; - u64 nasid; /* remote nasid */ - int n_IRQs_detected = 0; - AMO_t *act_amos; - - act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS; - - /* scan through act AMO variable looking for non-zero entries */ - for (word = 0; word < xp_nasid_mask_words; word++) { - - if (xpc_exiting) - break; - - nasid_mask = xpc_IPI_receive(&act_amos[word]); - if (nasid_mask == 0) { - /* no IRQs from nasids in this variable */ - continue; - } - - dev_dbg(xpc_part, "AMO[%d] gave back 0x%lx\n", word, - nasid_mask); - - /* - * If this nasid has been added to the machine since - * our partition was reset, this will retain the - * remote nasid in our reserved pages machine mask. - * This is used in the event of module reload. - */ - xpc_mach_nasids[word] |= nasid_mask; - - /* locate the nasid(s) which sent interrupts */ - - for (bit = 0; bit < (8 * sizeof(u64)); bit++) { - if (nasid_mask & (1UL << bit)) { - n_IRQs_detected++; - nasid = XPC_NASID_FROM_W_B(word, bit); - dev_dbg(xpc_part, "interrupt from nasid %ld\n", - nasid); - xpc_identify_act_IRQ_req(nasid); - } - } - } - return n_IRQs_detected; -} - /* * See if the other side has responded to a partition disengage request * from us. @@ -836,7 +464,7 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, spin_unlock_irqrestore(&part->act_lock, irq_flags); if (reason == xpReactivating) { /* we interrupt ourselves to reactivate partition */ - xpc_IPI_send_reactivate(part); + xpc_IPI_send_local_reactivate(part->reactivate_nasid); } return; } @@ -903,16 +531,12 @@ xpc_discovery(void) { void *remote_rp_base; struct xpc_rsvd_page *remote_rp; - struct xpc_vars *remote_vars; u64 remote_rp_pa; - u64 remote_vars_pa; int region; int region_size; int max_regions; int nasid; struct xpc_rsvd_page *rp; - short partid; - struct xpc_partition *part; u64 *discovered_nasids; enum xp_retval ret; @@ -922,8 +546,6 @@ xpc_discovery(void) if (remote_rp == NULL) return; - remote_vars = (struct xpc_vars *)remote_rp; - discovered_nasids = kzalloc(sizeof(u64) * xp_nasid_mask_words, GFP_KERNEL); if (discovered_nasids == NULL) { @@ -988,7 +610,7 @@ xpc_discovery(void) continue; } - /* pull over the reserved page structure */ + /* pull over the rsvd page header & part_nasids mask */ ret = xpc_get_remote_rp(nasid, discovered_nasids, remote_rp, &remote_rp_pa); @@ -1003,72 +625,8 @@ xpc_discovery(void) continue; } - remote_vars_pa = remote_rp->sn.vars_pa; - - partid = remote_rp->SAL_partid; - part = &xpc_partitions[partid]; - - /* pull over the cross partition variables */ - - ret = xpc_get_remote_vars(remote_vars_pa, remote_vars); - if (ret != xpSuccess) { - dev_dbg(xpc_part, "unable to get XPC variables " - "from nasid %d, reason=%d\n", nasid, - ret); - - XPC_DEACTIVATE_PARTITION(part, ret); - continue; - } - - if (part->act_state != XPC_P_INACTIVE) { - dev_dbg(xpc_part, "partition %d on nasid %d is " - "already activating\n", partid, nasid); - break; - } - - /* - * Register the remote partition's AMOs with SAL so it - * can handle and cleanup errors within that address - * range should the remote partition go down. We don't - * unregister this range because it is difficult to - * tell when outstanding writes to the remote partition - * are finished and thus when it is thus safe to - * unregister. This should not result in wasted space - * in the SAL xp_addr_region table because we should - * get the same page for remote_act_amos_pa after - * module reloads and system reboots. - */ - if (sn_register_xp_addr_region - (remote_vars->amos_page_pa, PAGE_SIZE, 1) < 0) { - dev_dbg(xpc_part, - "partition %d failed to " - "register xp_addr region 0x%016lx\n", - partid, remote_vars->amos_page_pa); - - XPC_SET_REASON(part, xpPhysAddrRegFailed, - __LINE__); - break; - } - - /* - * The remote nasid is valid and available. - * Send an interrupt to that nasid to notify - * it that we are ready to begin activation. - */ - dev_dbg(xpc_part, "sending an interrupt to AMO 0x%lx, " - "nasid %d, phys_cpuid 0x%x\n", - remote_vars->amos_page_pa, - remote_vars->act_nasid, - remote_vars->act_phys_cpuid); - - if (XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars-> - version)) { - part->remote_amos_page_pa = - remote_vars->amos_page_pa; - xpc_mark_partition_disengaged(part); - xpc_cancel_partition_disengage_request(part); - } - xpc_IPI_send_activate(remote_vars); + xpc_initiate_partition_activation(remote_rp, + remote_rp_pa, nasid); } } diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index ee28e231dc4..89c0bb9a27f 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -19,9 +19,370 @@ #include #include "xpc.h" -struct xpc_vars *xpc_vars; +static struct xpc_vars_sn2 *xpc_vars; /* >>> Add _sn2 suffix? */ static struct xpc_vars_part_sn2 *xpc_vars_part; /* >>> Add _sn2 suffix? */ +/* + * The following set of macros and functions are used for the sending and + * receiving of IPIs (also known as IRQs). There are two flavors of IPIs, + * one that is associated with partition activity (SGI_XPC_ACTIVATE) and + * the other that is associated with channel activity (SGI_XPC_NOTIFY). + */ + +static u64 +xpc_IPI_receive_sn2(AMO_t *amo) +{ + return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR); +} + +static enum xp_retval +xpc_IPI_send_sn2(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector) +{ + int ret = 0; + unsigned long irq_flags; + + local_irq_save(irq_flags); + + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, flag); + sn_send_IPI_phys(nasid, phys_cpuid, vector, 0); + + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); + + return ((ret == 0) ? xpSuccess : xpPioReadError); +} + +static AMO_t * +xpc_IPI_init_sn2(int index) +{ + AMO_t *amo = xpc_vars->amos_page + index; + + (void)xpc_IPI_receive_sn2(amo); /* clear AMO variable */ + return amo; +} + +/* + * IPIs associated with SGI_XPC_ACTIVATE IRQ. + */ + +/* + * Flag the appropriate AMO variable and send an IPI to the specified node. + */ +static void +xpc_activate_IRQ_send_sn2(u64 amos_page_pa, int from_nasid, int to_nasid, + int to_phys_cpuid) +{ + int w_index = XPC_NASID_W_INDEX(from_nasid); + int b_index = XPC_NASID_B_INDEX(from_nasid); + AMO_t *amos = (AMO_t *)__va(amos_page_pa + + (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t))); + + (void)xpc_IPI_send_sn2(&amos[w_index], (1UL << b_index), to_nasid, + to_phys_cpuid, SGI_XPC_ACTIVATE); +} + +static void +xpc_activate_IRQ_send_local_sn2(int from_nasid) +{ + int w_index = XPC_NASID_W_INDEX(from_nasid); + int b_index = XPC_NASID_B_INDEX(from_nasid); + AMO_t *amos = (AMO_t *)__va(xpc_vars->amos_page_pa + + (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t))); + + /* fake the sending and receipt of an activate IRQ from remote nasid */ + FETCHOP_STORE_OP(TO_AMO((u64)&amos[w_index].variable), FETCHOP_OR, + (1UL << b_index)); + atomic_inc(&xpc_act_IRQ_rcvd); + wake_up_interruptible(&xpc_act_IRQ_wq); +} + +static void +xpc_IPI_send_local_activate_sn2(int from_nasid) +{ + xpc_activate_IRQ_send_local_sn2(from_nasid); +} + +static void +xpc_IPI_send_activated_sn2(struct xpc_partition *part) +{ + xpc_activate_IRQ_send_sn2(part->remote_amos_page_pa, + cnodeid_to_nasid(0), part->remote_act_nasid, + part->remote_act_phys_cpuid); +} + +static void +xpc_IPI_send_local_reactivate_sn2(int from_nasid) +{ + xpc_activate_IRQ_send_local_sn2(from_nasid); +} + +static void +xpc_IPI_send_disengage_sn2(struct xpc_partition *part) +{ + xpc_activate_IRQ_send_sn2(part->remote_amos_page_pa, + cnodeid_to_nasid(0), part->remote_act_nasid, + part->remote_act_phys_cpuid); +} + +/* + * IPIs associated with SGI_XPC_NOTIFY IRQ. + */ + +/* + * Send an IPI to the remote partition that is associated with the + * specified channel. + */ +static void +xpc_notify_IRQ_send_sn2(struct xpc_channel *ch, u8 ipi_flag, + char *ipi_flag_string, unsigned long *irq_flags) +{ + struct xpc_partition *part = &xpc_partitions[ch->partid]; + enum xp_retval ret; + + if (likely(part->act_state != XPC_P_DEACTIVATING)) { + ret = xpc_IPI_send_sn2(part->remote_IPI_amo_va, + (u64)ipi_flag << (ch->number * 8), + part->remote_IPI_nasid, + part->remote_IPI_phys_cpuid, + SGI_XPC_NOTIFY); + dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n", + ipi_flag_string, ch->partid, ch->number, ret); + if (unlikely(ret != xpSuccess)) { + if (irq_flags != NULL) + spin_unlock_irqrestore(&ch->lock, *irq_flags); + XPC_DEACTIVATE_PARTITION(part, ret); + if (irq_flags != NULL) + spin_lock_irqsave(&ch->lock, *irq_flags); + } + } +} + +#define XPC_NOTIFY_IRQ_SEND_SN2(_ch, _ipi_f, _irq_f) \ + xpc_notify_IRQ_send_sn2(_ch, _ipi_f, #_ipi_f, _irq_f) + +/* + * Make it look like the remote partition, which is associated with the + * specified channel, sent us an IPI. This faked IPI will be handled + * by xpc_dropped_IPI_check(). + */ +static void +xpc_notify_IRQ_send_local_sn2(struct xpc_channel *ch, u8 ipi_flag, + char *ipi_flag_string) +{ + struct xpc_partition *part = &xpc_partitions[ch->partid]; + + FETCHOP_STORE_OP(TO_AMO((u64)&part->local_IPI_amo_va->variable), + FETCHOP_OR, ((u64)ipi_flag << (ch->number * 8))); + dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n", + ipi_flag_string, ch->partid, ch->number); +} + +#define XPC_NOTIFY_IRQ_SEND_LOCAL_SN2(_ch, _ipi_f) \ + xpc_notify_IRQ_send_local_sn2(_ch, _ipi_f, #_ipi_f) + +static void +xpc_IPI_send_closerequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_openclose_args *args = ch->local_openclose_args; + + args->reason = ch->reason; + XPC_NOTIFY_IRQ_SEND_SN2(ch, XPC_IPI_CLOSEREQUEST, irq_flags); +} + +static void +xpc_IPI_send_closereply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) +{ + XPC_NOTIFY_IRQ_SEND_SN2(ch, XPC_IPI_CLOSEREPLY, irq_flags); +} + +static void +xpc_IPI_send_openrequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_openclose_args *args = ch->local_openclose_args; + + args->msg_size = ch->msg_size; + args->local_nentries = ch->local_nentries; + XPC_NOTIFY_IRQ_SEND_SN2(ch, XPC_IPI_OPENREQUEST, irq_flags); +} + +static void +xpc_IPI_send_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_openclose_args *args = ch->local_openclose_args; + + args->remote_nentries = ch->remote_nentries; + args->local_nentries = ch->local_nentries; + args->local_msgqueue_pa = __pa(ch->local_msgqueue); + XPC_NOTIFY_IRQ_SEND_SN2(ch, XPC_IPI_OPENREPLY, irq_flags); +} + +static void +xpc_IPI_send_msgrequest_sn2(struct xpc_channel *ch) +{ + XPC_NOTIFY_IRQ_SEND_SN2(ch, XPC_IPI_MSGREQUEST, NULL); +} + +static void +xpc_IPI_send_local_msgrequest_sn2(struct xpc_channel *ch) +{ + XPC_NOTIFY_IRQ_SEND_LOCAL_SN2(ch, XPC_IPI_MSGREQUEST); +} + +/* + * This next set of functions are used to keep track of when a partition is + * potentially engaged in accessing memory belonging to another partition. + */ + +static void +xpc_mark_partition_engaged_sn2(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + + (XPC_ENGAGED_PARTITIONS_AMO * + sizeof(AMO_t))); + + local_irq_save(irq_flags); + + /* set bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, + (1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static void +xpc_mark_partition_disengaged_sn2(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + + (XPC_ENGAGED_PARTITIONS_AMO * + sizeof(AMO_t))); + + local_irq_save(irq_flags); + + /* clear bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, + ~(1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static void +xpc_request_partition_disengage_sn2(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + + (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); + + local_irq_save(irq_flags); + + /* set bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, + (1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static void +xpc_cancel_partition_disengage_request_sn2(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + + (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); + + local_irq_save(irq_flags); + + /* clear bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, + ~(1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static u64 +xpc_partition_engaged_sn2(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; + + /* return our partition's AMO variable ANDed with partid_mask */ + return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & + partid_mask); +} + +static u64 +xpc_partition_disengage_requested_sn2(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; + + /* return our partition's AMO variable ANDed with partid_mask */ + return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & + partid_mask); +} + +static void +xpc_clear_partition_engaged_sn2(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; + + /* clear bit(s) based on partid_mask in our partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, + ~partid_mask); +} + +static void +xpc_clear_partition_disengage_request_sn2(u64 partid_mask) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; + + /* clear bit(s) based on partid_mask in our partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, + ~partid_mask); +} + static enum xp_retval xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) { @@ -79,7 +440,7 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) } /* clear xpc_vars */ - memset(xpc_vars, 0, sizeof(struct xpc_vars)); + memset(xpc_vars, 0, sizeof(struct xpc_vars_sn2)); xpc_vars->version = XPC_V_VERSION; xpc_vars->act_nasid = cpuid_to_nasid(0); @@ -94,15 +455,446 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) /* initialize the activate IRQ related AMO variables */ for (i = 0; i < xp_nasid_mask_words; i++) - (void)xpc_IPI_init(XPC_ACTIVATE_IRQ_AMOS + i); + (void)xpc_IPI_init_sn2(XPC_ACTIVATE_IRQ_AMOS + i); /* initialize the engaged remote partitions related AMO variables */ - (void)xpc_IPI_init(XPC_ENGAGED_PARTITIONS_AMO); - (void)xpc_IPI_init(XPC_DISENGAGE_REQUEST_AMO); + (void)xpc_IPI_init_sn2(XPC_ENGAGED_PARTITIONS_AMO); + (void)xpc_IPI_init_sn2(XPC_DISENGAGE_REQUEST_AMO); + + return xpSuccess; +} + +static void +xpc_increment_heartbeat_sn2(void) +{ + xpc_vars->heartbeat++; +} + +static void +xpc_offline_heartbeat_sn2(void) +{ + xpc_increment_heartbeat_sn2(); + xpc_vars->heartbeat_offline = 1; +} + +static void +xpc_online_heartbeat_sn2(void) +{ + xpc_increment_heartbeat_sn2(); + xpc_vars->heartbeat_offline = 0; +} + +static void +xpc_heartbeat_init_sn2(void) +{ + DBUG_ON(xpc_vars == NULL); + + bitmap_zero(xpc_vars->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2); + xpc_heartbeating_to_mask = &xpc_vars->heartbeating_to_mask[0]; + xpc_online_heartbeat_sn2(); +} + +static void +xpc_heartbeat_exit_sn2(void) +{ + xpc_offline_heartbeat_sn2(); +} + +/* + * At periodic intervals, scan through all active partitions and ensure + * their heartbeat is still active. If not, the partition is deactivated. + */ +static void +xpc_check_remote_hb_sn2(void) +{ + struct xpc_vars_sn2 *remote_vars; + struct xpc_partition *part; + short partid; + enum xp_retval ret; + + remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer; + + for (partid = 0; partid < xp_max_npartitions; partid++) { + + if (xpc_exiting) + break; + + if (partid == sn_partition_id) + continue; + + part = &xpc_partitions[partid]; + + if (part->act_state == XPC_P_INACTIVE || + part->act_state == XPC_P_DEACTIVATING) { + continue; + } + + /* pull the remote_hb cache line */ + ret = xp_remote_memcpy(remote_vars, + (void *)part->remote_vars_pa, + XPC_RP_VARS_SIZE); + if (ret != xpSuccess) { + XPC_DEACTIVATE_PARTITION(part, ret); + continue; + } + + dev_dbg(xpc_part, "partid = %d, heartbeat = %ld, last_heartbeat" + " = %ld, heartbeat_offline = %ld, HB_mask[0] = 0x%lx\n", + partid, remote_vars->heartbeat, part->last_heartbeat, + remote_vars->heartbeat_offline, + remote_vars->heartbeating_to_mask[0]); + + if (((remote_vars->heartbeat == part->last_heartbeat) && + (remote_vars->heartbeat_offline == 0)) || + !xpc_hb_allowed(sn_partition_id, + &remote_vars->heartbeating_to_mask)) { + + XPC_DEACTIVATE_PARTITION(part, xpNoHeartbeat); + continue; + } + + part->last_heartbeat = remote_vars->heartbeat; + } +} + +/* + * Get a copy of the remote partition's XPC variables from the reserved page. + * + * remote_vars points to a buffer that is cacheline aligned for BTE copies and + * assumed to be of size XPC_RP_VARS_SIZE. + */ +static enum xp_retval +xpc_get_remote_vars_sn2(u64 remote_vars_pa, struct xpc_vars_sn2 *remote_vars) +{ + enum xp_retval ret; + + if (remote_vars_pa == 0) + return xpVarsNotSet; + + /* pull over the cross partition variables */ + ret = xp_remote_memcpy(remote_vars, (void *)remote_vars_pa, + XPC_RP_VARS_SIZE); + if (ret != xpSuccess) + return ret; + + if (XPC_VERSION_MAJOR(remote_vars->version) != + XPC_VERSION_MAJOR(XPC_V_VERSION)) { + return xpBadVersion; + } return xpSuccess; } +static void +xpc_initiate_partition_activation_sn2(struct xpc_rsvd_page *remote_rp, + u64 remote_rp_pa, int nasid) +{ + xpc_IPI_send_local_activate(nasid); +} + +/* + * Update the remote partition's info. + */ +static void +xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version, + struct timespec *remote_rp_stamp, + u64 remote_rp_pa, u64 remote_vars_pa, + struct xpc_vars_sn2 *remote_vars) +{ + part->remote_rp_version = remote_rp_version; + dev_dbg(xpc_part, " remote_rp_version = 0x%016x\n", + part->remote_rp_version); + + part->remote_rp_stamp = *remote_rp_stamp; + dev_dbg(xpc_part, " remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n", + part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec); + + part->remote_rp_pa = remote_rp_pa; + dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa); + + part->remote_vars_pa = remote_vars_pa; + dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n", + part->remote_vars_pa); + + part->last_heartbeat = remote_vars->heartbeat; + dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n", + part->last_heartbeat); + + part->remote_vars_part_pa = remote_vars->vars_part_pa; + dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n", + part->remote_vars_part_pa); + + part->remote_act_nasid = remote_vars->act_nasid; + dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n", + part->remote_act_nasid); + + part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid; + dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n", + part->remote_act_phys_cpuid); + + part->remote_amos_page_pa = remote_vars->amos_page_pa; + dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n", + part->remote_amos_page_pa); + + part->remote_vars_version = remote_vars->version; + dev_dbg(xpc_part, " remote_vars_version = 0x%x\n", + part->remote_vars_version); +} + +/* + * Prior code has determined the nasid which generated an IPI. Inspect + * that nasid to determine if its partition needs to be activated or + * deactivated. + * + * A partition is consider "awaiting activation" if our partition + * flags indicate it is not active and it has a heartbeat. A + * partition is considered "awaiting deactivation" if our partition + * flags indicate it is active but it has no heartbeat or it is not + * sending its heartbeat to us. + * + * To determine the heartbeat, the remote nasid must have a properly + * initialized reserved page. + */ +static void +xpc_identify_act_IRQ_req_sn2(int nasid) +{ + struct xpc_rsvd_page *remote_rp; + struct xpc_vars_sn2 *remote_vars; + u64 remote_rp_pa; + u64 remote_vars_pa; + int remote_rp_version; + int reactivate = 0; + int stamp_diff; + struct timespec remote_rp_stamp = { 0, 0 }; /*>>> ZERO_STAMP */ + short partid; + struct xpc_partition *part; + enum xp_retval ret; + + /* pull over the reserved page structure */ + + remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer; + + ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa); + if (ret != xpSuccess) { + dev_warn(xpc_part, "unable to get reserved page from nasid %d, " + "which sent interrupt, reason=%d\n", nasid, ret); + return; + } + + remote_vars_pa = remote_rp->sn.vars_pa; + remote_rp_version = remote_rp->version; + if (XPC_SUPPORTS_RP_STAMP(remote_rp_version)) + remote_rp_stamp = remote_rp->stamp; + + partid = remote_rp->SAL_partid; + part = &xpc_partitions[partid]; + + /* pull over the cross partition variables */ + + remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer; + + ret = xpc_get_remote_vars_sn2(remote_vars_pa, remote_vars); + if (ret != xpSuccess) { + + dev_warn(xpc_part, "unable to get XPC variables from nasid %d, " + "which sent interrupt, reason=%d\n", nasid, ret); + + XPC_DEACTIVATE_PARTITION(part, ret); + return; + } + + part->act_IRQ_rcvd++; + + dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = " + "%ld:0x%lx\n", (int)nasid, (int)partid, part->act_IRQ_rcvd, + remote_vars->heartbeat, remote_vars->heartbeating_to_mask[0]); + + if (xpc_partition_disengaged(part) && + part->act_state == XPC_P_INACTIVE) { + + xpc_update_partition_info_sn2(part, remote_rp_version, + &remote_rp_stamp, remote_rp_pa, + remote_vars_pa, remote_vars); + + if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) { + if (xpc_partition_disengage_requested(1UL << partid)) { + /* + * Other side is waiting on us to disengage, + * even though we already have. + */ + return; + } + + } else { + /* other side doesn't support disengage requests */ + xpc_clear_partition_disengage_request(1UL << partid); + } + + xpc_activate_partition(part); + return; + } + + DBUG_ON(part->remote_rp_version == 0); + DBUG_ON(part->remote_vars_version == 0); + + if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) { + DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part-> + remote_vars_version)); + + if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { + DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars-> + version)); + /* see if the other side rebooted */ + if (part->remote_amos_page_pa == + remote_vars->amos_page_pa && + xpc_hb_allowed(sn_partition_id, + &remote_vars->heartbeating_to_mask)) { + /* doesn't look that way, so ignore the IPI */ + return; + } + } + + /* + * Other side rebooted and previous XPC didn't support the + * disengage request, so we don't need to do anything special. + */ + + xpc_update_partition_info_sn2(part, remote_rp_version, + &remote_rp_stamp, remote_rp_pa, + remote_vars_pa, remote_vars); + part->reactivate_nasid = nasid; + XPC_DEACTIVATE_PARTITION(part, xpReactivating); + return; + } + + DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)); + + if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { + DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); + + /* + * Other side rebooted and previous XPC did support the + * disengage request, but the new one doesn't. + */ + + xpc_clear_partition_engaged(1UL << partid); + xpc_clear_partition_disengage_request(1UL << partid); + + xpc_update_partition_info_sn2(part, remote_rp_version, + &remote_rp_stamp, remote_rp_pa, + remote_vars_pa, remote_vars); + reactivate = 1; + + } else { + DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); + + stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp, + &remote_rp_stamp); + if (stamp_diff != 0) { + DBUG_ON(stamp_diff >= 0); + + /* + * Other side rebooted and the previous XPC did support + * the disengage request, as does the new one. + */ + + DBUG_ON(xpc_partition_engaged(1UL << partid)); + DBUG_ON(xpc_partition_disengage_requested(1UL << + partid)); + + xpc_update_partition_info_sn2(part, remote_rp_version, + &remote_rp_stamp, + remote_rp_pa, + remote_vars_pa, + remote_vars); + reactivate = 1; + } + } + + if (part->disengage_request_timeout > 0 && + !xpc_partition_disengaged(part)) { + /* still waiting on other side to disengage from us */ + return; + } + + if (reactivate) { + part->reactivate_nasid = nasid; + XPC_DEACTIVATE_PARTITION(part, xpReactivating); + + } else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) && + xpc_partition_disengage_requested(1UL << partid)) { + XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown); + } +} + +/* + * Loop through the activation AMO variables and process any bits + * which are set. Each bit indicates a nasid sending a partition + * activation or deactivation request. + * + * Return #of IRQs detected. + */ +int +xpc_identify_act_IRQ_sender_sn2(void) +{ + int word, bit; + u64 nasid_mask; + u64 nasid; /* remote nasid */ + int n_IRQs_detected = 0; + AMO_t *act_amos; + + act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS; + + /* scan through act AMO variable looking for non-zero entries */ + for (word = 0; word < xp_nasid_mask_words; word++) { + + if (xpc_exiting) + break; + + nasid_mask = xpc_IPI_receive_sn2(&act_amos[word]); + if (nasid_mask == 0) { + /* no IRQs from nasids in this variable */ + continue; + } + + dev_dbg(xpc_part, "AMO[%d] gave back 0x%lx\n", word, + nasid_mask); + + /* + * If this nasid has been added to the machine since + * our partition was reset, this will retain the + * remote nasid in our reserved pages machine mask. + * This is used in the event of module reload. + */ + xpc_mach_nasids[word] |= nasid_mask; + + /* locate the nasid(s) which sent interrupts */ + + for (bit = 0; bit < (8 * sizeof(u64)); bit++) { + if (nasid_mask & (1UL << bit)) { + n_IRQs_detected++; + nasid = XPC_NASID_FROM_W_B(word, bit); + dev_dbg(xpc_part, "interrupt from nasid %ld\n", + nasid); + xpc_identify_act_IRQ_req_sn2(nasid); + } + } + } + return n_IRQs_detected; +} + +static void +xpc_process_act_IRQ_rcvd_sn2(int n_IRQs_expected) +{ + int n_IRQs_detected; + + n_IRQs_detected = xpc_identify_act_IRQ_sender_sn2(); + if (n_IRQs_detected < n_IRQs_expected) { + /* retry once to help avoid missing AMO */ + (void)xpc_identify_act_IRQ_sender_sn2(); + } +} + /* * Setup the infrastructure necessary to support XPartition Communication * between the specified remote partition and the local one. @@ -177,7 +969,7 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) part->remote_openclose_args_pa = 0; - part->local_IPI_amo_va = xpc_IPI_init(partid); + part->local_IPI_amo_va = xpc_IPI_init_sn2(partid); part->local_IPI_amo = 0; spin_lock_init(&part->IPI_lock); @@ -468,6 +1260,28 @@ xpc_make_first_contact_sn2(struct xpc_partition *part) { enum xp_retval ret; + /* + * Register the remote partition's AMOs with SAL so it can handle + * and cleanup errors within that address range should the remote + * partition go down. We don't unregister this range because it is + * difficult to tell when outstanding writes to the remote partition + * are finished and thus when it is safe to unregister. This should + * not result in wasted space in the SAL xp_addr_region table because + * we should get the same page for remote_amos_page_pa after module + * reloads and system reboots. + */ + if (sn_register_xp_addr_region(part->remote_amos_page_pa, + PAGE_SIZE, 1) < 0) { + dev_warn(xpc_part, "xpc_activating(%d) failed to register " + "xp_addr region\n", XPC_PARTID(part)); + + ret = xpPhysAddrRegFailed; + XPC_DEACTIVATE_PARTITION(part, ret); + return ret; + } + + xpc_IPI_send_activated(part); + while ((ret = xpc_pull_remote_vars_part_sn2(part)) != xpSuccess) { if (ret != xpRetry) { XPC_DEACTIVATE_PARTITION(part, ret); @@ -651,15 +1465,370 @@ xpc_get_deliverable_msg_sn2(struct xpc_channel *ch) return msg; } +/* + * Now we actually send the messages that are ready to be sent by advancing + * the local message queue's Put value and then send an IPI to the recipient + * partition. + */ +static void +xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) +{ + struct xpc_msg *msg; + s64 put = initial_put + 1; + int send_IPI = 0; + + while (1) { + + while (1) { + if (put == ch->w_local_GP.put) + break; + + msg = (struct xpc_msg *)((u64)ch->local_msgqueue + + (put % ch->local_nentries) * + ch->msg_size); + + if (!(msg->flags & XPC_M_READY)) + break; + + put++; + } + + if (put == initial_put) { + /* nothing's changed */ + break; + } + + if (cmpxchg_rel(&ch->local_GP->put, initial_put, put) != + initial_put) { + /* someone else beat us to it */ + DBUG_ON(ch->local_GP->put < initial_put); + break; + } + + /* we just set the new value of local_GP->put */ + + dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, " + "channel=%d\n", put, ch->partid, ch->number); + + send_IPI = 1; + + /* + * We need to ensure that the message referenced by + * local_GP->put is not XPC_M_READY or that local_GP->put + * equals w_local_GP.put, so we'll go have a look. + */ + initial_put = put; + } + + if (send_IPI) + xpc_IPI_send_msgrequest_sn2(ch); +} + +/* + * Allocate an entry for a message from the message queue associated with the + * specified channel. + */ +static enum xp_retval +xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, + struct xpc_msg **address_of_msg) +{ + struct xpc_msg *msg; + enum xp_retval ret; + s64 put; + + /* this reference will be dropped in xpc_send_msg_sn2() */ + xpc_msgqueue_ref(ch); + + if (ch->flags & XPC_C_DISCONNECTING) { + xpc_msgqueue_deref(ch); + return ch->reason; + } + if (!(ch->flags & XPC_C_CONNECTED)) { + xpc_msgqueue_deref(ch); + return xpNotConnected; + } + + /* + * Get the next available message entry from the local message queue. + * If none are available, we'll make sure that we grab the latest + * GP values. + */ + ret = xpTimeout; + + while (1) { + + put = ch->w_local_GP.put; + rmb(); /* guarantee that .put loads before .get */ + if (put - ch->w_remote_GP.get < ch->local_nentries) { + + /* There are available message entries. We need to try + * to secure one for ourselves. We'll do this by trying + * to increment w_local_GP.put as long as someone else + * doesn't beat us to it. If they do, we'll have to + * try again. + */ + if (cmpxchg(&ch->w_local_GP.put, put, put + 1) == put) { + /* we got the entry referenced by put */ + break; + } + continue; /* try again */ + } + + /* + * There aren't any available msg entries at this time. + * + * In waiting for a message entry to become available, + * we set a timeout in case the other side is not + * sending completion IPIs. This lets us fake an IPI + * that will cause the IPI handler to fetch the latest + * GP values as if an IPI was sent by the other side. + */ + if (ret == xpTimeout) + xpc_IPI_send_local_msgrequest_sn2(ch); + + if (flags & XPC_NOWAIT) { + xpc_msgqueue_deref(ch); + return xpNoWait; + } + + ret = xpc_allocate_msg_wait(ch); + if (ret != xpInterrupted && ret != xpTimeout) { + xpc_msgqueue_deref(ch); + return ret; + } + } + + /* get the message's address and initialize it */ + msg = (struct xpc_msg *)((u64)ch->local_msgqueue + + (put % ch->local_nentries) * ch->msg_size); + + DBUG_ON(msg->flags != 0); + msg->number = put; + + dev_dbg(xpc_chan, "w_local_GP.put changed to %ld; msg=0x%p, " + "msg_number=%ld, partid=%d, channel=%d\n", put + 1, + (void *)msg, msg->number, ch->partid, ch->number); + + *address_of_msg = msg; + + return xpSuccess; +} + +/* + * Common code that does the actual sending of the message by advancing the + * local message queue's Put value and sends an IPI to the partition the + * message is being sent to. + */ +static enum xp_retval +xpc_send_msg_sn2(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type, + xpc_notify_func func, void *key) +{ + enum xp_retval ret = xpSuccess; + struct xpc_notify *notify = notify; + s64 put, msg_number = msg->number; + + DBUG_ON(notify_type == XPC_N_CALL && func == NULL); + DBUG_ON((((u64)msg - (u64)ch->local_msgqueue) / ch->msg_size) != + msg_number % ch->local_nentries); + DBUG_ON(msg->flags & XPC_M_READY); + + if (ch->flags & XPC_C_DISCONNECTING) { + /* drop the reference grabbed in xpc_allocate_msg_sn2() */ + xpc_msgqueue_deref(ch); + return ch->reason; + } + + if (notify_type != 0) { + /* + * Tell the remote side to send an ACK interrupt when the + * message has been delivered. + */ + msg->flags |= XPC_M_INTERRUPT; + + atomic_inc(&ch->n_to_notify); + + notify = &ch->notify_queue[msg_number % ch->local_nentries]; + notify->func = func; + notify->key = key; + notify->type = notify_type; + + /* >>> is a mb() needed here? */ + + if (ch->flags & XPC_C_DISCONNECTING) { + /* + * An error occurred between our last error check and + * this one. We will try to clear the type field from + * the notify entry. If we succeed then + * xpc_disconnect_channel() didn't already process + * the notify entry. + */ + if (cmpxchg(¬ify->type, notify_type, 0) == + notify_type) { + atomic_dec(&ch->n_to_notify); + ret = ch->reason; + } + + /* drop reference grabbed in xpc_allocate_msg_sn2() */ + xpc_msgqueue_deref(ch); + return ret; + } + } + + msg->flags |= XPC_M_READY; + + /* + * The preceding store of msg->flags must occur before the following + * load of ch->local_GP->put. + */ + mb(); + + /* see if the message is next in line to be sent, if so send it */ + + put = ch->local_GP->put; + if (put == msg_number) + xpc_send_msgs_sn2(ch, put); + + /* drop the reference grabbed in xpc_allocate_msg_sn2() */ + xpc_msgqueue_deref(ch); + return ret; +} + +/* + * Now we actually acknowledge the messages that have been delivered and ack'd + * by advancing the cached remote message queue's Get value and if requested + * send an IPI to the message sender's partition. + */ +static void +xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) +{ + struct xpc_msg *msg; + s64 get = initial_get + 1; + int send_IPI = 0; + + while (1) { + + while (1) { + if (get == ch->w_local_GP.get) + break; + + msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + + (get % ch->remote_nentries) * + ch->msg_size); + + if (!(msg->flags & XPC_M_DONE)) + break; + + msg_flags |= msg->flags; + get++; + } + + if (get == initial_get) { + /* nothing's changed */ + break; + } + + if (cmpxchg_rel(&ch->local_GP->get, initial_get, get) != + initial_get) { + /* someone else beat us to it */ + DBUG_ON(ch->local_GP->get <= initial_get); + break; + } + + /* we just set the new value of local_GP->get */ + + dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, " + "channel=%d\n", get, ch->partid, ch->number); + + send_IPI = (msg_flags & XPC_M_INTERRUPT); + + /* + * We need to ensure that the message referenced by + * local_GP->get is not XPC_M_DONE or that local_GP->get + * equals w_local_GP.get, so we'll go have a look. + */ + initial_get = get; + } + + if (send_IPI) + xpc_IPI_send_msgrequest_sn2(ch); +} + +static void +xpc_received_msg_sn2(struct xpc_channel *ch, struct xpc_msg *msg) +{ + s64 get; + s64 msg_number = msg->number; + + dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n", + (void *)msg, msg_number, ch->partid, ch->number); + + DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->msg_size) != + msg_number % ch->remote_nentries); + DBUG_ON(msg->flags & XPC_M_DONE); + + msg->flags |= XPC_M_DONE; + + /* + * The preceding store of msg->flags must occur before the following + * load of ch->local_GP->get. + */ + mb(); + + /* + * See if this message is next in line to be acknowledged as having + * been delivered. + */ + get = ch->local_GP->get; + if (get == msg_number) + xpc_acknowledge_msgs_sn2(ch, get, msg->flags); +} + void xpc_init_sn2(void) { xpc_rsvd_page_init = xpc_rsvd_page_init_sn2; + xpc_increment_heartbeat = xpc_increment_heartbeat_sn2; + xpc_offline_heartbeat = xpc_offline_heartbeat_sn2; + xpc_online_heartbeat = xpc_online_heartbeat_sn2; + xpc_heartbeat_init = xpc_heartbeat_init_sn2; + xpc_heartbeat_exit = xpc_heartbeat_exit_sn2; + xpc_check_remote_hb = xpc_check_remote_hb_sn2; + + xpc_initiate_partition_activation = + xpc_initiate_partition_activation_sn2; + xpc_process_act_IRQ_rcvd = xpc_process_act_IRQ_rcvd_sn2; xpc_setup_infrastructure = xpc_setup_infrastructure_sn2; xpc_teardown_infrastructure = xpc_teardown_infrastructure_sn2; xpc_make_first_contact = xpc_make_first_contact_sn2; xpc_get_IPI_flags = xpc_get_IPI_flags_sn2; xpc_get_deliverable_msg = xpc_get_deliverable_msg_sn2; + + xpc_mark_partition_engaged = xpc_mark_partition_engaged_sn2; + xpc_mark_partition_disengaged = xpc_mark_partition_disengaged_sn2; + xpc_request_partition_disengage = xpc_request_partition_disengage_sn2; + xpc_cancel_partition_disengage_request = + xpc_cancel_partition_disengage_request_sn2; + xpc_partition_engaged = xpc_partition_engaged_sn2; + xpc_partition_disengage_requested = + xpc_partition_disengage_requested_sn2; + xpc_clear_partition_engaged = xpc_clear_partition_engaged_sn2; + xpc_clear_partition_disengage_request = + xpc_clear_partition_disengage_request_sn2; + + xpc_IPI_send_local_activate = xpc_IPI_send_local_activate_sn2; + xpc_IPI_send_activated = xpc_IPI_send_activated_sn2; + xpc_IPI_send_local_reactivate = xpc_IPI_send_local_reactivate_sn2; + xpc_IPI_send_disengage = xpc_IPI_send_disengage_sn2; + + xpc_IPI_send_closerequest = xpc_IPI_send_closerequest_sn2; + xpc_IPI_send_closereply = xpc_IPI_send_closereply_sn2; + xpc_IPI_send_openrequest = xpc_IPI_send_openrequest_sn2; + xpc_IPI_send_openreply = xpc_IPI_send_openreply_sn2; + + xpc_allocate_msg = xpc_allocate_msg_sn2; + + xpc_send_msg = xpc_send_msg_sn2; + xpc_received_msg = xpc_received_msg_sn2; } void diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 770f0a8c669..32c577b8d0d 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -19,15 +19,22 @@ /* >>> uv_gpa() is defined in */ #define uv_gpa(_a) ((unsigned long)_a) -/* >>> temporarily define next three items for xpc.h */ -#define SGI_XPC_ACTIVATE 23 -#define SGI_XPC_NOTIFY 24 -#define sn_send_IPI_phys(_a, _b, _c, _d) - #include "xpc.h" +static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV); + static void *xpc_activate_mq; +static void +xpc_IPI_send_local_activate_uv(struct xpc_partition *part) +{ + /* + * >>> make our side think that the remote parition sent an activate + * >>> message our way. Also do what the activate IRQ handler would + * >>> do had one really been sent. + */ +} + static enum xp_retval xpc_rsvd_page_init_uv(struct xpc_rsvd_page *rp) { @@ -36,6 +43,41 @@ xpc_rsvd_page_init_uv(struct xpc_rsvd_page *rp) return xpSuccess; } +static void +xpc_increment_heartbeat_uv(void) +{ + /* >>> send heartbeat msg to xpc_heartbeating_to_mask partids */ +} + +static void +xpc_heartbeat_init_uv(void) +{ + bitmap_zero(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV); + xpc_heartbeating_to_mask = &xpc_heartbeating_to_mask_uv[0]; +} + +static void +xpc_heartbeat_exit_uv(void) +{ + /* >>> send heartbeat_offline msg to xpc_heartbeating_to_mask partids */ +} + +static void +xpc_initiate_partition_activation_uv(struct xpc_rsvd_page *remote_rp, + u64 remote_rp_pa, int nasid) +{ + short partid = remote_rp->SAL_partid; + struct xpc_partition *part = &xpc_partitions[partid]; + +/* + * >>> setup part structure with the bits of info we can glean from the rp + * >>> part->remote_rp_pa = remote_rp_pa; + * >>> part->sn.uv.activate_mq_gpa = remote_rp->sn.activate_mq_gpa; + */ + + xpc_IPI_send_local_activate_uv(part); +} + /* * Setup the infrastructure necessary to support XPartition Communication * between the specified remote partition and the local one. @@ -83,6 +125,11 @@ void xpc_init_uv(void) { xpc_rsvd_page_init = xpc_rsvd_page_init_uv; + xpc_increment_heartbeat = xpc_increment_heartbeat_uv; + xpc_heartbeat_init = xpc_heartbeat_init_uv; + xpc_heartbeat_exit = xpc_heartbeat_exit_uv; + xpc_initiate_partition_activation = + xpc_initiate_partition_activation_uv; xpc_setup_infrastructure = xpc_setup_infrastructure_uv; xpc_teardown_infrastructure = xpc_teardown_infrastructure_uv; xpc_make_first_contact = xpc_make_first_contact_uv; -- GitLab From aaa3cd694c0c4ae534e8aafdf4227e395c57d6bd Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:07 -0700 Subject: [PATCH 0397/1024] sgi-xp: base xpc_rsvd_page's timestamp on jiffies Change XPC's reserved page timestamp to be based on jiffies. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc.h | 26 +++-------------------- drivers/misc/sgi-xp/xpc_main.c | 16 +++++++------- drivers/misc/sgi-xp/xpc_partition.c | 33 +++++++++++++++-------------- drivers/misc/sgi-xp/xpc_sn2.c | 16 ++++++-------- 4 files changed, 34 insertions(+), 57 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index a3a67485cf8..56bf5dcc391 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -115,8 +115,8 @@ struct xpc_rsvd_page { u64 vars_pa; /* physical address of struct xpc_vars */ u64 activate_mq_gpa; /* global phys address of activate_mq */ } sn; - struct timespec stamp; /* time when reserved page was setup by XPC */ - u64 pad2[9]; /* align to last u64 in 2nd 64-byte cacheline */ + unsigned long stamp; /* time when reserved page was setup by XPC */ + u64 pad2[10]; /* align to last u64 in 2nd 64-byte cacheline */ u64 SAL_nasids_size; /* SAL: size of each nasid mask in bytes */ }; @@ -125,26 +125,6 @@ struct xpc_rsvd_page { #define XPC_SUPPORTS_RP_STAMP(_version) \ (_version >= _XPC_VERSION(1, 1)) -#define ZERO_STAMP ((struct timespec){0, 0}) -/* - * compare stamps - the return value is: - * - * < 0, if stamp1 < stamp2 - * = 0, if stamp1 == stamp2 - * > 0, if stamp1 > stamp2 - */ -static inline int -xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2) -{ - int ret; - - ret = stamp1->tv_sec - stamp2->tv_sec; - if (ret == 0) - ret = stamp1->tv_nsec - stamp2->tv_nsec; - - return ret; -} - /* * Define the structures by which XPC variables can be exported to other * partitions. (There are two: struct xpc_vars and struct xpc_vars_part) @@ -492,7 +472,7 @@ struct xpc_partition { /* XPC HB infrastructure */ u8 remote_rp_version; /* version# of partition's rsvd pg */ - struct timespec remote_rp_stamp; /* time when rsvd pg was initialized */ + unsigned long remote_rp_stamp; /* time when rsvd pg was initialized */ u64 remote_rp_pa; /* phys addr of partition's rsvd pg */ u64 remote_vars_pa; /* phys addr of partition's vars */ u64 remote_vars_part_pa; /* phys addr of partition's vars part */ diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 10dac3652b2..4a6eb377475 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -233,7 +233,7 @@ xpc_timeout_partition_disengage_request(unsigned long data) { struct xpc_partition *part = (struct xpc_partition *)data; - DBUG_ON(time_before(jiffies, part->disengage_request_timeout)); + DBUG_ON(time_is_after_jiffies(part->disengage_request_timeout)); (void)xpc_partition_disengaged(part); @@ -262,7 +262,7 @@ xpc_hb_beater(unsigned long dummy) { xpc_increment_heartbeat(); - if (time_after_eq(jiffies, xpc_hb_check_timeout)) + if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) wake_up_interruptible(&xpc_act_IRQ_wq); xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ); @@ -312,7 +312,7 @@ xpc_hb_checker(void *ignore) atomic_read(&xpc_act_IRQ_rcvd) - last_IRQ_count); /* checking of remote heartbeats is skewed by IRQ handling */ - if (time_after_eq(jiffies, xpc_hb_check_timeout)) { + if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) { dev_dbg(xpc_part, "checking remote heartbeats\n"); xpc_check_remote_hb(); @@ -344,8 +344,8 @@ xpc_hb_checker(void *ignore) (void)wait_event_interruptible(xpc_act_IRQ_wq, (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) - || time_after_eq(jiffies, - xpc_hb_check_timeout) || + || time_is_before_eq_jiffies( + xpc_hb_check_timeout) || xpc_exiting)); } @@ -929,7 +929,7 @@ xpc_do_exit(enum xp_retval reason) } if (xpc_partition_engaged(-1UL)) { - if (time_after(jiffies, printmsg_time)) { + if (time_is_before_jiffies(printmsg_time)) { dev_info(xpc_part, "waiting for remote " "partitions to disengage, timeout in " "%ld seconds\n", @@ -964,7 +964,7 @@ xpc_do_exit(enum xp_retval reason) DBUG_ON(xpc_any_hbs_allowed() != 0); /* indicate to others that our reserved page is uninitialized */ - xpc_rsvd_page->stamp = ZERO_STAMP; + xpc_rsvd_page->stamp = 0; if (reason == xpUnloading) { (void)unregister_die_notifier(&xpc_die_notifier); @@ -1295,7 +1295,7 @@ xpc_init(void) /* initialization was not successful */ out_4: /* indicate to others that our reserved page is uninitialized */ - xpc_rsvd_page->stamp = ZERO_STAMP; + xpc_rsvd_page->stamp = 0; (void)unregister_die_notifier(&xpc_die_notifier); (void)unregister_reboot_notifier(&xpc_reboot_notifier); diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index 4e14effdedd..90ec5ca8c9a 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -152,6 +152,7 @@ xpc_setup_rsvd_page(void) { struct xpc_rsvd_page *rp; u64 rp_pa; + unsigned long new_stamp; /* get the local reserved page's address */ @@ -201,7 +202,10 @@ xpc_setup_rsvd_page(void) * This signifies to the remote partition that our reserved * page is initialized. */ - rp->stamp = CURRENT_TIME; + new_stamp = jiffies; + if (new_stamp == 0 || new_stamp == rp->stamp) + new_stamp++; + rp->stamp = new_stamp; return rp; } @@ -350,18 +354,8 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, discovered_nasids[i] |= remote_part_nasids[i]; } - /* check that the partid is valid and is for another partition */ - - if (remote_rp->SAL_partid < 0 || - remote_rp->SAL_partid >= xp_max_npartitions) { - return xpInvalidPartid; - } - - if (remote_rp->SAL_partid == sn_partition_id) - return xpLocalPartid; - - /* see if the rest of the reserved page has been set up by XPC */ - if (timespec_equal(&remote_rp->stamp, &ZERO_STAMP)) + /* see if the reserved page has been set up by XPC */ + if (remote_rp->stamp == 0) return xpRsvdPageNotSet; if (XPC_VERSION_MAJOR(remote_rp->version) != @@ -369,8 +363,15 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, return xpBadVersion; } - if (remote_rp->max_npartitions <= sn_partition_id) + /* check that both local and remote partids are valid for each side */ + if (remote_rp->SAL_partid < 0 || + remote_rp->SAL_partid >= xp_max_npartitions || + remote_rp->max_npartitions <= sn_partition_id) { return xpInvalidPartid; + } + + if (remote_rp->SAL_partid == sn_partition_id) + return xpLocalPartid; return xpSuccess; } @@ -388,8 +389,8 @@ xpc_partition_disengaged(struct xpc_partition *part) disengaged = (xpc_partition_engaged(1UL << partid) == 0); if (part->disengage_request_timeout) { if (!disengaged) { - if (time_before(jiffies, - part->disengage_request_timeout)) { + if (time_is_after_jiffies(part-> + disengage_request_timeout)) { /* timelimit hasn't been reached yet */ return 0; } diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 89c0bb9a27f..7216df36bc7 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -597,8 +597,8 @@ xpc_initiate_partition_activation_sn2(struct xpc_rsvd_page *remote_rp, */ static void xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version, - struct timespec *remote_rp_stamp, - u64 remote_rp_pa, u64 remote_vars_pa, + unsigned long *remote_rp_stamp, u64 remote_rp_pa, + u64 remote_vars_pa, struct xpc_vars_sn2 *remote_vars) { part->remote_rp_version = remote_rp_version; @@ -606,8 +606,8 @@ xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version, part->remote_rp_version); part->remote_rp_stamp = *remote_rp_stamp; - dev_dbg(xpc_part, " remote_rp_stamp (tv_sec = 0x%lx tv_nsec = 0x%lx\n", - part->remote_rp_stamp.tv_sec, part->remote_rp_stamp.tv_nsec); + dev_dbg(xpc_part, " remote_rp_stamp = 0x%016lx\n", + part->remote_rp_stamp); part->remote_rp_pa = remote_rp_pa; dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa); @@ -664,8 +664,7 @@ xpc_identify_act_IRQ_req_sn2(int nasid) u64 remote_vars_pa; int remote_rp_version; int reactivate = 0; - int stamp_diff; - struct timespec remote_rp_stamp = { 0, 0 }; /*>>> ZERO_STAMP */ + unsigned long remote_rp_stamp = 0; short partid; struct xpc_partition *part; enum xp_retval ret; @@ -788,10 +787,7 @@ xpc_identify_act_IRQ_req_sn2(int nasid) } else { DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); - stamp_diff = xpc_compare_stamps(&part->remote_rp_stamp, - &remote_rp_stamp); - if (stamp_diff != 0) { - DBUG_ON(stamp_diff >= 0); + if (remote_rp_stamp != part->remote_rp_stamp) { /* * Other side rebooted and the previous XPC did support -- GitLab From 97bf1aa1e1bb18de9bb1987c6eb9ad751bf08aab Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:08 -0700 Subject: [PATCH 0398/1024] sgi-xp: move xpc_allocate() into xpc_send()/xpc_send_notify() Move xpc_allocate() functionality into xpc_send()/xpc_send_notify() so xpc_allocate() no longer needs to be called by XPNET. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xp.h | 44 +++++------- drivers/misc/sgi-xp/xp_main.c | 23 +++--- drivers/misc/sgi-xp/xpc.h | 9 +-- drivers/misc/sgi-xp/xpc_channel.c | 112 +++++++++++------------------- drivers/misc/sgi-xp/xpc_main.c | 14 ++-- drivers/misc/sgi-xp/xpc_sn2.c | 64 ++++++++--------- drivers/misc/sgi-xp/xpnet.c | 11 ++- 7 files changed, 106 insertions(+), 171 deletions(-) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 0f75592896d..43bf2470850 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -116,12 +116,6 @@ * The size of the payload is defined by the user via xpc_connect(). A user- * defined message resides in the payload area. * - * The user should have no dealings with the message header, but only the - * message's payload. When a message entry is allocated (via xpc_allocate()) - * a pointer to the payload area is returned and not the actual beginning of - * the XPC message. The user then constructs a message in the payload area - * and passes that pointer as an argument on xpc_send() or xpc_send_notify(). - * * The size of a message entry (within a message queue) must be a cacheline * sized multiple in order to facilitate the BTE transfer of messages from one * message queue to another. A macro, XPC_MSG_SIZE(), is provided for the user @@ -221,9 +215,10 @@ enum xp_retval { xpBteCopyError, /* 52: bte_copy() returned error */ xpSalError, /* 53: sn SAL error */ xpRsvdPageNotSet, /* 54: the reserved page is not set up */ + xpPayloadTooBig, /* 55: payload too large for message slot */ - xpUnsupported, /* 55: unsupported functionality or resource */ - xpUnknownReason /* 56: unknown reason - must be last in enum */ + xpUnsupported, /* 56: unsupported functionality or resource */ + xpUnknownReason /* 57: unknown reason - must be last in enum */ }; /* @@ -304,16 +299,15 @@ struct xpc_registration { #define XPC_CHANNEL_REGISTERED(_c) (xpc_registrations[_c].func != NULL) -/* the following are valid xpc_allocate() flags */ +/* the following are valid xpc_send() or xpc_send_notify() flags */ #define XPC_WAIT 0 /* wait flag */ #define XPC_NOWAIT 1 /* no wait flag */ struct xpc_interface { void (*connect) (int); void (*disconnect) (int); - enum xp_retval (*allocate) (short, int, u32, void **); - enum xp_retval (*send) (short, int, void *); - enum xp_retval (*send_notify) (short, int, void *, + enum xp_retval (*send) (short, int, u32, void *, u16); + enum xp_retval (*send_notify) (short, int, u32, void *, u16, xpc_notify_func, void *); void (*received) (short, int, void *); enum xp_retval (*partid_to_nasids) (short, void *); @@ -323,10 +317,9 @@ extern struct xpc_interface xpc_interface; extern void xpc_set_interface(void (*)(int), void (*)(int), - enum xp_retval (*)(short, int, u32, void **), - enum xp_retval (*)(short, int, void *), - enum xp_retval (*)(short, int, void *, - xpc_notify_func, void *), + enum xp_retval (*)(short, int, u32, void *, u16), + enum xp_retval (*)(short, int, u32, void *, u16, + xpc_notify_func, void *), void (*)(short, int, void *), enum xp_retval (*)(short, void *)); extern void xpc_clear_interface(void); @@ -336,22 +329,19 @@ extern enum xp_retval xpc_connect(int, xpc_channel_func, void *, u16, extern void xpc_disconnect(int); static inline enum xp_retval -xpc_allocate(short partid, int ch_number, u32 flags, void **payload) -{ - return xpc_interface.allocate(partid, ch_number, flags, payload); -} - -static inline enum xp_retval -xpc_send(short partid, int ch_number, void *payload) +xpc_send(short partid, int ch_number, u32 flags, void *payload, + u16 payload_size) { - return xpc_interface.send(partid, ch_number, payload); + return xpc_interface.send(partid, ch_number, flags, payload, + payload_size); } static inline enum xp_retval -xpc_send_notify(short partid, int ch_number, void *payload, - xpc_notify_func func, void *key) +xpc_send_notify(short partid, int ch_number, u32 flags, void *payload, + u16 payload_size, xpc_notify_func func, void *key) { - return xpc_interface.send_notify(partid, ch_number, payload, func, key); + return xpc_interface.send_notify(partid, ch_number, flags, payload, + payload_size, func, key); } static inline void diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c index 6f25613b27e..9c0ce2f15ff 100644 --- a/drivers/misc/sgi-xp/xp_main.c +++ b/drivers/misc/sgi-xp/xp_main.c @@ -58,10 +58,9 @@ xpc_notloaded(void) struct xpc_interface xpc_interface = { (void (*)(int))xpc_notloaded, (void (*)(int))xpc_notloaded, - (enum xp_retval(*)(short, int, u32, void **))xpc_notloaded, - (enum xp_retval(*)(short, int, void *))xpc_notloaded, - (enum xp_retval(*)(short, int, void *, xpc_notify_func, void *)) - xpc_notloaded, + (enum xp_retval(*)(short, int, u32, void *, u16))xpc_notloaded, + (enum xp_retval(*)(short, int, u32, void *, u16, xpc_notify_func, + void *))xpc_notloaded, (void (*)(short, int, void *))xpc_notloaded, (enum xp_retval(*)(short, void *))xpc_notloaded }; @@ -73,16 +72,14 @@ EXPORT_SYMBOL_GPL(xpc_interface); void xpc_set_interface(void (*connect) (int), void (*disconnect) (int), - enum xp_retval (*allocate) (short, int, u32, void **), - enum xp_retval (*send) (short, int, void *), - enum xp_retval (*send_notify) (short, int, void *, + enum xp_retval (*send) (short, int, u32, void *, u16), + enum xp_retval (*send_notify) (short, int, u32, void *, u16, xpc_notify_func, void *), void (*received) (short, int, void *), enum xp_retval (*partid_to_nasids) (short, void *)) { xpc_interface.connect = connect; xpc_interface.disconnect = disconnect; - xpc_interface.allocate = allocate; xpc_interface.send = send; xpc_interface.send_notify = send_notify; xpc_interface.received = received; @@ -98,13 +95,11 @@ xpc_clear_interface(void) { xpc_interface.connect = (void (*)(int))xpc_notloaded; xpc_interface.disconnect = (void (*)(int))xpc_notloaded; - xpc_interface.allocate = (enum xp_retval(*)(short, int, u32, - void **))xpc_notloaded; - xpc_interface.send = (enum xp_retval(*)(short, int, void *)) + xpc_interface.send = (enum xp_retval(*)(short, int, u32, void *, u16)) xpc_notloaded; - xpc_interface.send_notify = (enum xp_retval(*)(short, int, void *, - xpc_notify_func, - void *))xpc_notloaded; + xpc_interface.send_notify = (enum xp_retval(*)(short, int, u32, void *, + u16, xpc_notify_func, + void *))xpc_notloaded; xpc_interface.received = (void (*)(short, int, void *)) xpc_notloaded; xpc_interface.partid_to_nasids = (enum xp_retval(*)(short, void *)) diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 56bf5dcc391..6b622b091bd 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -624,9 +624,7 @@ extern void (*xpc_IPI_send_closereply) (struct xpc_channel *, unsigned long *); extern void (*xpc_IPI_send_openrequest) (struct xpc_channel *, unsigned long *); extern void (*xpc_IPI_send_openreply) (struct xpc_channel *, unsigned long *); -extern enum xp_retval (*xpc_allocate_msg) (struct xpc_channel *, u32, - struct xpc_msg **); -extern enum xp_retval (*xpc_send_msg) (struct xpc_channel *, struct xpc_msg *, +extern enum xp_retval (*xpc_send_msg) (struct xpc_channel *, u32, void *, u16, u8, xpc_notify_func, void *); extern void (*xpc_received_msg) (struct xpc_channel *, struct xpc_msg *); @@ -664,9 +662,8 @@ extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **); extern void xpc_initiate_connect(int); extern void xpc_initiate_disconnect(int); extern enum xp_retval xpc_allocate_msg_wait(struct xpc_channel *); -extern enum xp_retval xpc_initiate_allocate(short, int, u32, void **); -extern enum xp_retval xpc_initiate_send(short, int, void *); -extern enum xp_retval xpc_initiate_send_notify(short, int, void *, +extern enum xp_retval xpc_initiate_send(short, int, u32, void *, u16); +extern enum xp_retval xpc_initiate_send_notify(short, int, u32, void *, u16, xpc_notify_func, void *); extern void xpc_initiate_received(short, int, void *); extern void xpc_process_channel_activity(struct xpc_partition *); diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 26c5e12c122..55182c8dd32 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -1192,87 +1192,54 @@ xpc_allocate_msg_wait(struct xpc_channel *ch) } /* - * Allocate an entry for a message from the message queue associated with the - * specified channel. NOTE that this routine can sleep waiting for a message - * entry to become available. To not sleep, pass in the XPC_NOWAIT flag. + * Send a message that contains the user's payload on the specified channel + * connected to the specified partition. * - * Arguments: + * NOTE that this routine can sleep waiting for a message entry to become + * available. To not sleep, pass in the XPC_NOWAIT flag. * - * partid - ID of partition to which the channel is connected. - * ch_number - channel #. - * flags - see xpc.h for valid flags. - * payload - address of the allocated payload area pointer (filled in on - * return) in which the user-defined message is constructed. - */ -enum xp_retval -xpc_initiate_allocate(short partid, int ch_number, u32 flags, void **payload) -{ - struct xpc_partition *part = &xpc_partitions[partid]; - enum xp_retval ret = xpUnknownReason; - struct xpc_msg *msg = NULL; - - DBUG_ON(partid < 0 || partid >= xp_max_npartitions); - DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); - - *payload = NULL; - - if (xpc_part_ref(part)) { - ret = xpc_allocate_msg(&part->channels[ch_number], flags, &msg); - xpc_part_deref(part); - - if (msg != NULL) - *payload = &msg->payload; - } - - return ret; -} - -/* - * Send a message previously allocated using xpc_initiate_allocate() on the - * specified channel connected to the specified partition. - * - * This routine will not wait for the message to be received, nor will - * notification be given when it does happen. Once this routine has returned - * the message entry allocated via xpc_initiate_allocate() is no longer - * accessable to the caller. - * - * This routine, although called by users, does not call xpc_part_ref() to - * ensure that the partition infrastructure is in place. It relies on the - * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg(). + * Once sent, this routine will not wait for the message to be received, nor + * will notification be given when it does happen. * * Arguments: * * partid - ID of partition to which the channel is connected. * ch_number - channel # to send message on. - * payload - pointer to the payload area allocated via - * xpc_initiate_allocate(). + * flags - see xp.h for valid flags. + * payload - pointer to the payload which is to be sent. + * payload_size - size of the payload in bytes. */ enum xp_retval -xpc_initiate_send(short partid, int ch_number, void *payload) +xpc_initiate_send(short partid, int ch_number, u32 flags, void *payload, + u16 payload_size) { struct xpc_partition *part = &xpc_partitions[partid]; - struct xpc_msg *msg = XPC_MSG_ADDRESS(payload); - enum xp_retval ret; + enum xp_retval ret = xpUnknownReason; - dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg, + dev_dbg(xpc_chan, "payload=0x%p, partid=%d, channel=%d\n", payload, partid, ch_number); DBUG_ON(partid < 0 || partid >= xp_max_npartitions); DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); - DBUG_ON(msg == NULL); + DBUG_ON(payload == NULL); - ret = xpc_send_msg(&part->channels[ch_number], msg, 0, NULL, NULL); + if (xpc_part_ref(part)) { + ret = xpc_send_msg(&part->channels[ch_number], flags, payload, + payload_size, 0, NULL, NULL); + xpc_part_deref(part); + } return ret; } /* - * Send a message previously allocated using xpc_initiate_allocate on the - * specified channel connected to the specified partition. + * Send a message that contains the user's payload on the specified channel + * connected to the specified partition. * - * This routine will not wait for the message to be sent. Once this routine - * has returned the message entry allocated via xpc_initiate_allocate() is no - * longer accessable to the caller. + * NOTE that this routine can sleep waiting for a message entry to become + * available. To not sleep, pass in the XPC_NOWAIT flag. + * + * This routine will not wait for the message to be sent or received. * * Once the remote end of the channel has received the message, the function * passed as an argument to xpc_initiate_send_notify() will be called. This @@ -1282,38 +1249,37 @@ xpc_initiate_send(short partid, int ch_number, void *payload) * * If this routine returns an error, the caller's function will NOT be called. * - * This routine, although called by users, does not call xpc_part_ref() to - * ensure that the partition infrastructure is in place. It relies on the - * fact that we called xpc_msgqueue_ref() in xpc_allocate_msg(). - * * Arguments: * * partid - ID of partition to which the channel is connected. * ch_number - channel # to send message on. - * payload - pointer to the payload area allocated via - * xpc_initiate_allocate(). + * flags - see xp.h for valid flags. + * payload - pointer to the payload which is to be sent. + * payload_size - size of the payload in bytes. * func - function to call with asynchronous notification of message * receipt. THIS FUNCTION MUST BE NON-BLOCKING. * key - user-defined key to be passed to the function when it's called. */ enum xp_retval -xpc_initiate_send_notify(short partid, int ch_number, void *payload, - xpc_notify_func func, void *key) +xpc_initiate_send_notify(short partid, int ch_number, u32 flags, void *payload, + u16 payload_size, xpc_notify_func func, void *key) { struct xpc_partition *part = &xpc_partitions[partid]; - struct xpc_msg *msg = XPC_MSG_ADDRESS(payload); - enum xp_retval ret; + enum xp_retval ret = xpUnknownReason; - dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg, + dev_dbg(xpc_chan, "payload=0x%p, partid=%d, channel=%d\n", payload, partid, ch_number); DBUG_ON(partid < 0 || partid >= xp_max_npartitions); DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); - DBUG_ON(msg == NULL); + DBUG_ON(payload == NULL); DBUG_ON(func == NULL); - ret = xpc_send_msg(&part->channels[ch_number], msg, XPC_N_CALL, - func, key); + if (xpc_part_ref(part)) { + ret = xpc_send_msg(&part->channels[ch_number], flags, payload, + payload_size, XPC_N_CALL, func, key); + xpc_part_deref(part); + } return ret; } @@ -1372,7 +1338,7 @@ xpc_deliver_msg(struct xpc_channel *ch) * partid - ID of partition to which the channel is connected. * ch_number - channel # message received on. * payload - pointer to the payload area allocated via - * xpc_initiate_allocate(). + * xpc_initiate_send() or xpc_initiate_send_notify(). */ void xpc_initiate_received(short partid, int ch_number, void *payload) diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 4a6eb377475..aae90f5933b 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -217,12 +217,9 @@ void (*xpc_IPI_send_openrequest) (struct xpc_channel *ch, void (*xpc_IPI_send_openreply) (struct xpc_channel *ch, unsigned long *irq_flags); -enum xp_retval (*xpc_allocate_msg) (struct xpc_channel *ch, u32 flags, - struct xpc_msg **address_of_msg); - -enum xp_retval (*xpc_send_msg) (struct xpc_channel *ch, struct xpc_msg *msg, - u8 notify_type, xpc_notify_func func, - void *key); +enum xp_retval (*xpc_send_msg) (struct xpc_channel *ch, u32 flags, + void *payload, u16 payload_size, u8 notify_type, + xpc_notify_func func, void *key); void (*xpc_received_msg) (struct xpc_channel *ch, struct xpc_msg *msg); /* @@ -1286,9 +1283,8 @@ xpc_init(void) /* set the interface to point at XPC's functions */ xpc_set_interface(xpc_initiate_connect, xpc_initiate_disconnect, - xpc_initiate_allocate, xpc_initiate_send, - xpc_initiate_send_notify, xpc_initiate_received, - xpc_initiate_partid_to_nasids); + xpc_initiate_send, xpc_initiate_send_notify, + xpc_initiate_received, xpc_initiate_partid_to_nasids); return 0; diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 7216df36bc7..db67d348b35 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -1532,18 +1532,6 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, enum xp_retval ret; s64 put; - /* this reference will be dropped in xpc_send_msg_sn2() */ - xpc_msgqueue_ref(ch); - - if (ch->flags & XPC_C_DISCONNECTING) { - xpc_msgqueue_deref(ch); - return ch->reason; - } - if (!(ch->flags & XPC_C_CONNECTED)) { - xpc_msgqueue_deref(ch); - return xpNotConnected; - } - /* * Get the next available message entry from the local message queue. * If none are available, we'll make sure that we grab the latest @@ -1582,16 +1570,12 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, if (ret == xpTimeout) xpc_IPI_send_local_msgrequest_sn2(ch); - if (flags & XPC_NOWAIT) { - xpc_msgqueue_deref(ch); + if (flags & XPC_NOWAIT) return xpNoWait; - } ret = xpc_allocate_msg_wait(ch); - if (ret != xpInterrupted && ret != xpTimeout) { - xpc_msgqueue_deref(ch); + if (ret != xpInterrupted && ret != xpTimeout) return ret; - } } /* get the message's address and initialize it */ @@ -1606,7 +1590,6 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, (void *)msg, msg->number, ch->partid, ch->number); *address_of_msg = msg; - return xpSuccess; } @@ -1616,24 +1599,38 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, * message is being sent to. */ static enum xp_retval -xpc_send_msg_sn2(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type, - xpc_notify_func func, void *key) +xpc_send_msg_sn2(struct xpc_channel *ch, u32 flags, void *payload, + u16 payload_size, u8 notify_type, xpc_notify_func func, + void *key) { enum xp_retval ret = xpSuccess; + struct xpc_msg *msg = msg; struct xpc_notify *notify = notify; - s64 put, msg_number = msg->number; + s64 msg_number; + s64 put; DBUG_ON(notify_type == XPC_N_CALL && func == NULL); - DBUG_ON((((u64)msg - (u64)ch->local_msgqueue) / ch->msg_size) != - msg_number % ch->local_nentries); - DBUG_ON(msg->flags & XPC_M_READY); + + if (XPC_MSG_SIZE(payload_size) > ch->msg_size) + return xpPayloadTooBig; + + xpc_msgqueue_ref(ch); if (ch->flags & XPC_C_DISCONNECTING) { - /* drop the reference grabbed in xpc_allocate_msg_sn2() */ - xpc_msgqueue_deref(ch); - return ch->reason; + ret = ch->reason; + goto out_1; + } + if (!(ch->flags & XPC_C_CONNECTED)) { + ret = xpNotConnected; + goto out_1; } + ret = xpc_allocate_msg_sn2(ch, flags, &msg); + if (ret != xpSuccess) + goto out_1; + + msg_number = msg->number; + if (notify_type != 0) { /* * Tell the remote side to send an ACK interrupt when the @@ -1663,13 +1660,12 @@ xpc_send_msg_sn2(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type, atomic_dec(&ch->n_to_notify); ret = ch->reason; } - - /* drop reference grabbed in xpc_allocate_msg_sn2() */ - xpc_msgqueue_deref(ch); - return ret; + goto out_1; } } + memcpy(&msg->payload, payload, payload_size); + msg->flags |= XPC_M_READY; /* @@ -1684,7 +1680,7 @@ xpc_send_msg_sn2(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type, if (put == msg_number) xpc_send_msgs_sn2(ch, put); - /* drop the reference grabbed in xpc_allocate_msg_sn2() */ +out_1: xpc_msgqueue_deref(ch); return ret; } @@ -1821,8 +1817,6 @@ xpc_init_sn2(void) xpc_IPI_send_openrequest = xpc_IPI_send_openrequest_sn2; xpc_IPI_send_openreply = xpc_IPI_send_openreply_sn2; - xpc_allocate_msg = xpc_allocate_msg_sn2; - xpc_send_msg = xpc_send_msg_sn2; xpc_received_msg = xpc_received_msg_sn2; } diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index 9c540eb1847..f9356ba7315 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -438,7 +438,8 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct xpnet_pending_msg *queued_msg; enum xp_retval ret; - struct xpnet_message *msg; + u8 msg_buffer[XPNET_MSG_SIZE]; + struct xpnet_message *msg = (struct xpnet_message *)&msg_buffer[0]; u64 start_addr, end_addr; long dp; u8 second_mac_octet; @@ -524,11 +525,6 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) /* found a partition to send to */ - ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL, - XPC_NOWAIT, (void **)&msg); - if (unlikely(ret != xpSuccess)) - continue; - msg->embedded_bytes = embedded_bytes; if (unlikely(embedded_bytes != 0)) { msg->version = XPNET_VERSION_EMBED; @@ -553,7 +549,8 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) atomic_inc(&queued_msg->use_count); - ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg, + ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, XPC_NOWAIT, + &msg, sizeof(msg) + embedded_bytes - 1, xpnet_send_completed, queued_msg); if (unlikely(ret != xpSuccess)) { atomic_dec(&queued_msg->use_count); -- GitLab From 6e41017aad9ed175ca51e4828eabc8c5cf5910be Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:09 -0700 Subject: [PATCH 0399/1024] sgi-xp: isolate activate IRQ's hardware specific components Isolate architecture specific code related to XPC's activate IRQ. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc.h | 14 +- drivers/misc/sgi-xp/xpc_main.c | 96 ++++-------- drivers/misc/sgi-xp/xpc_partition.c | 121 ---------------- drivers/misc/sgi-xp/xpc_sn2.c | 217 ++++++++++++++++++++++++---- 4 files changed, 229 insertions(+), 219 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 6b622b091bd..1edf37512de 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -480,7 +480,7 @@ struct xpc_partition { u64 remote_amos_page_pa; /* phys addr of partition's amos page */ int remote_act_nasid; /* active part's act/deact nasid */ int remote_act_phys_cpuid; /* active part's act/deact phys cpuid */ - u32 act_IRQ_rcvd; /* IRQs since activation */ + u32 activate_IRQ_rcvd; /* IRQs since activation */ spinlock_t act_lock; /* protect updating of act_state */ u8 act_state; /* from XPC HB viewpoint */ u8 remote_vars_version; /* version# of partition's vars */ @@ -580,8 +580,8 @@ extern struct device *xpc_part; extern struct device *xpc_chan; extern int xpc_disengage_request_timelimit; extern int xpc_disengage_request_timedout; -extern atomic_t xpc_act_IRQ_rcvd; -extern wait_queue_head_t xpc_act_IRQ_wq; +extern atomic_t xpc_activate_IRQ_rcvd; +extern wait_queue_head_t xpc_activate_IRQ_wq; extern void *xpc_heartbeating_to_mask; extern irqreturn_t xpc_notify_IRQ_handler(int, void *); extern void xpc_dropped_IPI_check(struct xpc_partition *); @@ -601,7 +601,7 @@ extern u64 (*xpc_get_IPI_flags) (struct xpc_partition *); extern struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *); extern void (*xpc_initiate_partition_activation) (struct xpc_rsvd_page *, u64, int); -extern void (*xpc_process_act_IRQ_rcvd) (int); +extern void (*xpc_process_activate_IRQ_rcvd) (int); extern enum xp_retval (*xpc_setup_infrastructure) (struct xpc_partition *); extern void (*xpc_teardown_infrastructure) (struct xpc_partition *); extern void (*xpc_mark_partition_engaged) (struct xpc_partition *); @@ -629,10 +629,12 @@ extern enum xp_retval (*xpc_send_msg) (struct xpc_channel *, u32, void *, u16, extern void (*xpc_received_msg) (struct xpc_channel *, struct xpc_msg *); /* found in xpc_sn2.c */ -extern void xpc_init_sn2(void); +extern int xpc_init_sn2(void); +extern void xpc_exit_sn2(void); /* found in xpc_uv.c */ extern void xpc_init_uv(void); +extern void xpc_exit_uv(void); /* found in xpc_partition.c */ extern int xpc_exiting; @@ -646,7 +648,7 @@ extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **); extern struct xpc_rsvd_page *xpc_setup_rsvd_page(void); extern void xpc_allow_IPI_ops(void); extern void xpc_restrict_IPI_ops(void); -extern int xpc_identify_act_IRQ_sender(void); +extern int xpc_identify_activate_IRQ_sender(void); extern int xpc_partition_disengaged(struct xpc_partition *); extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *); extern void xpc_mark_partition_inactive(struct xpc_partition *); diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index aae90f5933b..8780d5d00f6 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -147,11 +147,11 @@ static struct ctl_table_header *xpc_sysctl; /* non-zero if any remote partition disengage request was timed out */ int xpc_disengage_request_timedout; -/* #of IRQs received */ -atomic_t xpc_act_IRQ_rcvd; +/* #of activate IRQs received */ +atomic_t xpc_activate_IRQ_rcvd = ATOMIC_INIT(0); /* IRQ handler notifies this wait queue on receipt of an IRQ */ -DECLARE_WAIT_QUEUE_HEAD(xpc_act_IRQ_wq); +DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq); static unsigned long xpc_hb_check_timeout; static struct timer_list xpc_hb_timer; @@ -190,7 +190,7 @@ struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *ch); void (*xpc_initiate_partition_activation) (struct xpc_rsvd_page *remote_rp, u64 remote_rp_pa, int nasid); -void (*xpc_process_act_IRQ_rcvd) (int n_IRQs_expected); +void (*xpc_process_activate_IRQ_rcvd) (int n_IRQs_expected); enum xp_retval (*xpc_setup_infrastructure) (struct xpc_partition *part); void (*xpc_teardown_infrastructure) (struct xpc_partition *part); @@ -238,17 +238,6 @@ xpc_timeout_partition_disengage_request(unsigned long data) DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0); } -/* - * Notify the heartbeat check thread that an IRQ has been received. - */ -static irqreturn_t -xpc_act_IRQ_handler(int irq, void *dev_id) -{ - atomic_inc(&xpc_act_IRQ_rcvd); - wake_up_interruptible(&xpc_act_IRQ_wq); - return IRQ_HANDLED; -} - /* * Timer to produce the heartbeat. The timer structures function is * already set when this is initially called. A tunable is used to @@ -260,7 +249,7 @@ xpc_hb_beater(unsigned long dummy) xpc_increment_heartbeat(); if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) - wake_up_interruptible(&xpc_act_IRQ_wq); + wake_up_interruptible(&xpc_activate_IRQ_wq); xpc_hb_timer.expires = jiffies + (xpc_hb_interval * HZ); add_timer(&xpc_hb_timer); @@ -306,7 +295,7 @@ xpc_hb_checker(void *ignore) dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have " "been received\n", (int)(xpc_hb_check_timeout - jiffies), - atomic_read(&xpc_act_IRQ_rcvd) - last_IRQ_count); + atomic_read(&xpc_activate_IRQ_rcvd) - last_IRQ_count); /* checking of remote heartbeats is skewed by IRQ handling */ if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) { @@ -322,15 +311,15 @@ xpc_hb_checker(void *ignore) } /* check for outstanding IRQs */ - new_IRQ_count = atomic_read(&xpc_act_IRQ_rcvd); + new_IRQ_count = atomic_read(&xpc_activate_IRQ_rcvd); if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) { force_IRQ = 0; dev_dbg(xpc_part, "found an IRQ to process; will be " "resetting xpc_hb_check_timeout\n"); - xpc_process_act_IRQ_rcvd(new_IRQ_count - - last_IRQ_count); + xpc_process_activate_IRQ_rcvd(new_IRQ_count - + last_IRQ_count); last_IRQ_count = new_IRQ_count; xpc_hb_check_timeout = jiffies + @@ -338,9 +327,9 @@ xpc_hb_checker(void *ignore) } /* wait for IRQ or timeout */ - (void)wait_event_interruptible(xpc_act_IRQ_wq, - (last_IRQ_count < - atomic_read(&xpc_act_IRQ_rcvd) + (void)wait_event_interruptible(xpc_activate_IRQ_wq, + (last_IRQ_count < atomic_read( + &xpc_activate_IRQ_rcvd) || time_is_before_eq_jiffies( xpc_hb_check_timeout) || xpc_exiting)); @@ -884,10 +873,7 @@ xpc_do_exit(enum xp_retval reason) * the heartbeat checker thread in case it's sleeping. */ xpc_exiting = 1; - wake_up_interruptible(&xpc_act_IRQ_wq); - - /* ignore all incoming interrupts */ - free_irq(SGI_XPC_ACTIVATE, NULL); + wake_up_interruptible(&xpc_activate_IRQ_wq); /* wait for the discovery thread to exit */ wait_for_completion(&xpc_discovery_exited); @@ -968,9 +954,6 @@ xpc_do_exit(enum xp_retval reason) (void)unregister_reboot_notifier(&xpc_reboot_notifier); } - /* close down protections for IPI operations */ - xpc_restrict_IPI_ops(); - /* clear the interface to XPC's functions */ xpc_clear_interface(); @@ -979,6 +962,11 @@ xpc_do_exit(enum xp_retval reason) kfree(xpc_partitions); kfree(xpc_remote_copy_buffer_base); + + if (is_shub()) + xpc_exit_sn2(); + else + xpc_exit_uv(); } /* @@ -1144,7 +1132,9 @@ xpc_init(void) if (xp_max_npartitions != 64) return -EINVAL; - xpc_init_sn2(); + ret = xpc_init_sn2(); + if (ret != 0) + return ret; } else if (is_uv()) { xpc_init_uv(); @@ -1163,7 +1153,8 @@ xpc_init(void) &xpc_remote_copy_buffer_base); if (xpc_remote_copy_buffer == NULL) { dev_err(xpc_part, "can't get memory for remote copy buffer\n"); - return -ENOMEM; + ret = -ENOMEM; + goto out_1; } xpc_partitions = kzalloc(sizeof(struct xpc_partition) * @@ -1171,7 +1162,7 @@ xpc_init(void) if (xpc_partitions == NULL) { dev_err(xpc_part, "can't get memory for partition structure\n"); ret = -ENOMEM; - goto out_1; + goto out_2; } /* @@ -1187,7 +1178,7 @@ xpc_init(void) DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part)); - part->act_IRQ_rcvd = 0; + part->activate_IRQ_rcvd = 0; spin_lock_init(&part->act_lock); part->act_state = XPC_P_INACTIVE; XPC_SET_REASON(part, 0, 0); @@ -1204,33 +1195,6 @@ xpc_init(void) xpc_sysctl = register_sysctl_table(xpc_sys_dir); - /* - * Open up protections for IPI operations (and AMO operations on - * Shub 1.1 systems). - */ - xpc_allow_IPI_ops(); - - /* - * Interrupts being processed will increment this atomic variable and - * awaken the heartbeat thread which will process the interrupts. - */ - atomic_set(&xpc_act_IRQ_rcvd, 0); - - /* - * This is safe to do before the xpc_hb_checker thread has started - * because the handler releases a wait queue. If an interrupt is - * received before the thread is waiting, it will not go to sleep, - * but rather immediately process the interrupt. - */ - ret = request_irq(SGI_XPC_ACTIVATE, xpc_act_IRQ_handler, 0, - "xpc hb", NULL); - if (ret != 0) { - dev_err(xpc_part, "can't register ACTIVATE IRQ handler, " - "errno=%d\n", -ret); - ret = -EBUSY; - goto out_2; - } - /* * Fill the partition reserved page with the information needed by * other partitions to discover we are alive and establish initial @@ -1296,14 +1260,16 @@ out_4: (void)unregister_die_notifier(&xpc_die_notifier); (void)unregister_reboot_notifier(&xpc_reboot_notifier); out_3: - free_irq(SGI_XPC_ACTIVATE, NULL); -out_2: - xpc_restrict_IPI_ops(); if (xpc_sysctl) unregister_sysctl_table(xpc_sysctl); kfree(xpc_partitions); -out_1: +out_2: kfree(xpc_remote_copy_buffer_base); +out_1: + if (is_shub()) + xpc_exit_sn2(); + else + xpc_exit_uv(); return ret; } diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index 90ec5ca8c9a..bf9b1193bd2 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -29,16 +29,6 @@ /* XPC is exiting flag */ int xpc_exiting; -/* SH_IPI_ACCESS shub register value on startup */ -static u64 xpc_sh1_IPI_access; -static u64 xpc_sh2_IPI_access0; -static u64 xpc_sh2_IPI_access1; -static u64 xpc_sh2_IPI_access2; -static u64 xpc_sh2_IPI_access3; - -/* original protection values for each node */ -u64 xpc_prot_vec[MAX_NUMNODES]; - /* this partition's reserved page pointers */ struct xpc_rsvd_page *xpc_rsvd_page; static u64 *xpc_part_nasids; @@ -210,117 +200,6 @@ xpc_setup_rsvd_page(void) return rp; } -/* - * Change protections to allow IPI operations (and AMO operations on - * Shub 1.1 systems). - */ -void -xpc_allow_IPI_ops(void) -{ - int node; - int nasid; - - /* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */ - - if (is_shub2()) { - xpc_sh2_IPI_access0 = - (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0)); - xpc_sh2_IPI_access1 = - (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1)); - xpc_sh2_IPI_access2 = - (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2)); - xpc_sh2_IPI_access3 = - (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3)); - - for_each_online_node(node) { - nasid = cnodeid_to_nasid(node); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0), - -1UL); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1), - -1UL); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2), - -1UL); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3), - -1UL); - } - - } else { - xpc_sh1_IPI_access = - (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS)); - - for_each_online_node(node) { - nasid = cnodeid_to_nasid(node); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS), - -1UL); - - /* - * Since the BIST collides with memory operations on - * SHUB 1.1 sn_change_memprotect() cannot be used. - */ - if (enable_shub_wars_1_1()) { - /* open up everything */ - xpc_prot_vec[node] = (u64)HUB_L((u64 *) - GLOBAL_MMR_ADDR - (nasid, - SH1_MD_DQLP_MMR_DIR_PRIVEC0)); - HUB_S((u64 *) - GLOBAL_MMR_ADDR(nasid, - SH1_MD_DQLP_MMR_DIR_PRIVEC0), - -1UL); - HUB_S((u64 *) - GLOBAL_MMR_ADDR(nasid, - SH1_MD_DQRP_MMR_DIR_PRIVEC0), - -1UL); - } - } - } -} - -/* - * Restrict protections to disallow IPI operations (and AMO operations on - * Shub 1.1 systems). - */ -void -xpc_restrict_IPI_ops(void) -{ - int node; - int nasid; - - /* >>> Change SH_IPI_ACCESS code to use SAL call once it is available */ - - if (is_shub2()) { - - for_each_online_node(node) { - nasid = cnodeid_to_nasid(node); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0), - xpc_sh2_IPI_access0); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1), - xpc_sh2_IPI_access1); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2), - xpc_sh2_IPI_access2); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3), - xpc_sh2_IPI_access3); - } - - } else { - - for_each_online_node(node) { - nasid = cnodeid_to_nasid(node); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS), - xpc_sh1_IPI_access); - - if (enable_shub_wars_1_1()) { - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, - SH1_MD_DQLP_MMR_DIR_PRIVEC0), - xpc_prot_vec[node]); - HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, - SH1_MD_DQRP_MMR_DIR_PRIVEC0), - xpc_prot_vec[node]); - } - } - } -} - /* * Get a copy of a portion of the remote partition's rsvd page. * diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index db67d348b35..4659f6cb885 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -22,6 +22,87 @@ static struct xpc_vars_sn2 *xpc_vars; /* >>> Add _sn2 suffix? */ static struct xpc_vars_part_sn2 *xpc_vars_part; /* >>> Add _sn2 suffix? */ +/* SH_IPI_ACCESS shub register value on startup */ +static u64 xpc_sh1_IPI_access; +static u64 xpc_sh2_IPI_access0; +static u64 xpc_sh2_IPI_access1; +static u64 xpc_sh2_IPI_access2; +static u64 xpc_sh2_IPI_access3; + +/* + * Change protections to allow IPI operations. + */ +static void +xpc_allow_IPI_ops_sn2(void) +{ + int node; + int nasid; + + /* >>> The following should get moved into SAL. */ + if (is_shub2()) { + xpc_sh2_IPI_access0 = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0)); + xpc_sh2_IPI_access1 = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1)); + xpc_sh2_IPI_access2 = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2)); + xpc_sh2_IPI_access3 = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3)); + + for_each_online_node(node) { + nasid = cnodeid_to_nasid(node); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0), + -1UL); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1), + -1UL); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2), + -1UL); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3), + -1UL); + } + } else { + xpc_sh1_IPI_access = + (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS)); + + for_each_online_node(node) { + nasid = cnodeid_to_nasid(node); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS), + -1UL); + } + } +} + +/* + * Restrict protections to disallow IPI operations. + */ +static void +xpc_disallow_IPI_ops_sn2(void) +{ + int node; + int nasid; + + /* >>> The following should get moved into SAL. */ + if (is_shub2()) { + for_each_online_node(node) { + nasid = cnodeid_to_nasid(node); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0), + xpc_sh2_IPI_access0); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1), + xpc_sh2_IPI_access1); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2), + xpc_sh2_IPI_access2); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3), + xpc_sh2_IPI_access3); + } + } else { + for_each_online_node(node) { + nasid = cnodeid_to_nasid(node); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS), + xpc_sh1_IPI_access); + } + } +} + /* * The following set of macros and functions are used for the sending and * receiving of IPIs (also known as IRQs). There are two flavors of IPIs, @@ -73,6 +154,17 @@ xpc_IPI_init_sn2(int index) * IPIs associated with SGI_XPC_ACTIVATE IRQ. */ +/* + * Notify the heartbeat check thread that an activate IRQ has been received. + */ +static irqreturn_t +xpc_handle_activate_IRQ_sn2(int irq, void *dev_id) +{ + atomic_inc(&xpc_activate_IRQ_rcvd); + wake_up_interruptible(&xpc_activate_IRQ_wq); + return IRQ_HANDLED; +} + /* * Flag the appropriate AMO variable and send an IPI to the specified node. */ @@ -100,8 +192,8 @@ xpc_activate_IRQ_send_local_sn2(int from_nasid) /* fake the sending and receipt of an activate IRQ from remote nasid */ FETCHOP_STORE_OP(TO_AMO((u64)&amos[w_index].variable), FETCHOP_OR, (1UL << b_index)); - atomic_inc(&xpc_act_IRQ_rcvd); - wake_up_interruptible(&xpc_act_IRQ_wq); + atomic_inc(&xpc_activate_IRQ_rcvd); + wake_up_interruptible(&xpc_activate_IRQ_wq); } static void @@ -383,11 +475,65 @@ xpc_clear_partition_disengage_request_sn2(u64 partid_mask) ~partid_mask); } +/* original protection values for each node */ +static u64 xpc_prot_vec_sn2[MAX_NUMNODES]; + +/* + * Change protections to allow AMO operations on non-Shub 1.1 systems. + */ +static enum xp_retval +xpc_allow_AMO_ops_sn2(AMO_t *amos_page) +{ + u64 nasid_array = 0; + int ret; + + /* + * On SHUB 1.1, we cannot call sn_change_memprotect() since the BIST + * collides with memory operations. On those systems we call + * xpc_allow_AMO_ops_shub_wars_1_1_sn2() instead. + */ + if (!enable_shub_wars_1_1()) { + ret = sn_change_memprotect(ia64_tpa((u64)amos_page), PAGE_SIZE, + SN_MEMPROT_ACCESS_CLASS_1, + &nasid_array); + if (ret != 0) + return xpSalError; + } + return xpSuccess; +} + +/* + * Change protections to allow AMO operations on Shub 1.1 systems. + */ +static void +xpc_allow_AMO_ops_shub_wars_1_1_sn2(void) +{ + int node; + int nasid; + + if (!enable_shub_wars_1_1()) + return; + + for_each_online_node(node) { + nasid = cnodeid_to_nasid(node); + /* save current protection values */ + xpc_prot_vec_sn2[node] = + (u64)HUB_L((u64 *)GLOBAL_MMR_ADDR(nasid, + SH1_MD_DQLP_MMR_DIR_PRIVEC0)); + /* open up everything */ + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, + SH1_MD_DQLP_MMR_DIR_PRIVEC0), + -1UL); + HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, + SH1_MD_DQRP_MMR_DIR_PRIVEC0), + -1UL); + } +} + static enum xp_retval xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) { AMO_t *amos_page; - u64 nasid_array = 0; int i; int ret; @@ -421,21 +567,15 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) } /* - * Open up AMO-R/W to cpu. This is done for Shub 1.1 systems - * when xpc_allow_IPI_ops() is called via xpc_hb_init(). + * Open up AMO-R/W to cpu. This is done on Shub 1.1 systems + * when xpc_allow_AMO_ops_shub_wars_1_1_sn2() is called. */ - if (!enable_shub_wars_1_1()) { - ret = sn_change_memprotect(ia64_tpa((u64)amos_page), - PAGE_SIZE, - SN_MEMPROT_ACCESS_CLASS_1, - &nasid_array); - if (ret != 0) { - dev_err(xpc_part, "can't change memory " - "protections\n"); - uncached_free_page(__IA64_UNCACHED_OFFSET | - TO_PHYS((u64)amos_page), 1); - return xpSalError; - } + ret = xpc_allow_AMO_ops_sn2(amos_page); + if (ret != xpSuccess) { + dev_err(xpc_part, "can't allow AMO operations\n"); + uncached_free_page(__IA64_UNCACHED_OFFSET | + TO_PHYS((u64)amos_page), 1); + return ret; } } @@ -656,7 +796,7 @@ xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version, * initialized reserved page. */ static void -xpc_identify_act_IRQ_req_sn2(int nasid) +xpc_identify_activate_IRQ_req_sn2(int nasid) { struct xpc_rsvd_page *remote_rp; struct xpc_vars_sn2 *remote_vars; @@ -702,10 +842,10 @@ xpc_identify_act_IRQ_req_sn2(int nasid) return; } - part->act_IRQ_rcvd++; + part->activate_IRQ_rcvd++; dev_dbg(xpc_part, "partid for nasid %d is %d; IRQs = %d; HB = " - "%ld:0x%lx\n", (int)nasid, (int)partid, part->act_IRQ_rcvd, + "%ld:0x%lx\n", (int)nasid, (int)partid, part->activate_IRQ_rcvd, remote_vars->heartbeat, remote_vars->heartbeating_to_mask[0]); if (xpc_partition_disengaged(part) && @@ -831,7 +971,7 @@ xpc_identify_act_IRQ_req_sn2(int nasid) * Return #of IRQs detected. */ int -xpc_identify_act_IRQ_sender_sn2(void) +xpc_identify_activate_IRQ_sender_sn2(void) { int word, bit; u64 nasid_mask; @@ -872,7 +1012,7 @@ xpc_identify_act_IRQ_sender_sn2(void) nasid = XPC_NASID_FROM_W_B(word, bit); dev_dbg(xpc_part, "interrupt from nasid %ld\n", nasid); - xpc_identify_act_IRQ_req_sn2(nasid); + xpc_identify_activate_IRQ_req_sn2(nasid); } } } @@ -880,14 +1020,14 @@ xpc_identify_act_IRQ_sender_sn2(void) } static void -xpc_process_act_IRQ_rcvd_sn2(int n_IRQs_expected) +xpc_process_activate_IRQ_rcvd_sn2(int n_IRQs_expected) { int n_IRQs_detected; - n_IRQs_detected = xpc_identify_act_IRQ_sender_sn2(); + n_IRQs_detected = xpc_identify_activate_IRQ_sender_sn2(); if (n_IRQs_detected < n_IRQs_expected) { /* retry once to help avoid missing AMO */ - (void)xpc_identify_act_IRQ_sender_sn2(); + (void)xpc_identify_activate_IRQ_sender_sn2(); } } @@ -1775,9 +1915,11 @@ xpc_received_msg_sn2(struct xpc_channel *ch, struct xpc_msg *msg) xpc_acknowledge_msgs_sn2(ch, get, msg->flags); } -void +int xpc_init_sn2(void) { + int ret; + xpc_rsvd_page_init = xpc_rsvd_page_init_sn2; xpc_increment_heartbeat = xpc_increment_heartbeat_sn2; xpc_offline_heartbeat = xpc_offline_heartbeat_sn2; @@ -1788,7 +1930,7 @@ xpc_init_sn2(void) xpc_initiate_partition_activation = xpc_initiate_partition_activation_sn2; - xpc_process_act_IRQ_rcvd = xpc_process_act_IRQ_rcvd_sn2; + xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2; xpc_setup_infrastructure = xpc_setup_infrastructure_sn2; xpc_teardown_infrastructure = xpc_teardown_infrastructure_sn2; xpc_make_first_contact = xpc_make_first_contact_sn2; @@ -1819,9 +1961,30 @@ xpc_init_sn2(void) xpc_send_msg = xpc_send_msg_sn2; xpc_received_msg = xpc_received_msg_sn2; + + /* open up protections for IPI and [potentially] AMO operations */ + xpc_allow_IPI_ops_sn2(); + xpc_allow_AMO_ops_shub_wars_1_1_sn2(); + + /* + * This is safe to do before the xpc_hb_checker thread has started + * because the handler releases a wait queue. If an interrupt is + * received before the thread is waiting, it will not go to sleep, + * but rather immediately process the interrupt. + */ + ret = request_irq(SGI_XPC_ACTIVATE, xpc_handle_activate_IRQ_sn2, 0, + "xpc hb", NULL); + if (ret != 0) { + dev_err(xpc_part, "can't register ACTIVATE IRQ handler, " + "errno=%d\n", -ret); + xpc_disallow_IPI_ops_sn2(); + } + return ret; } void xpc_exit_sn2(void) { + free_irq(SGI_XPC_ACTIVATE, NULL); + xpc_disallow_IPI_ops_sn2(); } -- GitLab From a47d5dac9d8481766382f8cf1483dd581df38b99 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:09 -0700 Subject: [PATCH 0400/1024] sgi-xp: isolate additional sn2 specific code Move additional sn2 specific code into xpc_sn2.c. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc.h | 173 +++--- drivers/misc/sgi-xp/xpc_channel.c | 214 +------ drivers/misc/sgi-xp/xpc_main.c | 278 +++------ drivers/misc/sgi-xp/xpc_partition.c | 59 +- drivers/misc/sgi-xp/xpc_sn2.c | 851 ++++++++++++++++++---------- drivers/misc/sgi-xp/xpc_uv.c | 15 +- 6 files changed, 784 insertions(+), 806 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 1edf37512de..b04cfbed958 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -122,9 +122,6 @@ struct xpc_rsvd_page { #define XPC_RP_VERSION _XPC_VERSION(2, 0) /* version 2.0 of the reserved page */ -#define XPC_SUPPORTS_RP_STAMP(_version) \ - (_version >= _XPC_VERSION(1, 1)) - /* * Define the structures by which XPC variables can be exported to other * partitions. (There are two: struct xpc_vars and struct xpc_vars_part) @@ -144,8 +141,8 @@ struct xpc_vars_sn2 { u64 heartbeat; DECLARE_BITMAP(heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2); u64 heartbeat_offline; /* if 0, heartbeat should be changing */ - int act_nasid; - int act_phys_cpuid; + int activate_IRQ_nasid; + int activate_IRQ_phys_cpuid; u64 vars_part_pa; u64 amos_page_pa; /* paddr of page of AMOs from MSPEC driver */ AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */ @@ -153,9 +150,6 @@ struct xpc_vars_sn2 { #define XPC_V_VERSION _XPC_VERSION(3, 1) /* version 3.1 of the cross vars */ -#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \ - (_version >= _XPC_VERSION(3, 1)) - /* * The following pertains to ia64-sn2 only. * @@ -167,14 +161,14 @@ struct xpc_vars_sn2 { * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 * AMO variables (based on XP_MAX_NPARTITIONS_SN2) to identify the senders of * NOTIFY IRQs, 128 AMO variables (based on XP_NASID_MASK_WORDS) to identify - * the senders of ACTIVATE IRQs, and 2 AMO variables to identify which remote + * the senders of ACTIVATE IRQs, 1 AMO variable to identify which remote * partitions (i.e., XPCs) consider themselves currently engaged with the - * local XPC. + * local XPC and 1 AMO variable to request partition deactivation. */ #define XPC_NOTIFY_IRQ_AMOS 0 #define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_NPARTITIONS_SN2) #define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS) -#define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1) +#define XPC_DEACTIVATE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1) /* * The following structure describes the per partition specific variables. @@ -369,6 +363,23 @@ struct xpc_notify { * new messages, by the clearing of the message flags of the acknowledged * messages. */ +struct xpc_channel_sn2 { + + /* various flavors of local and remote Get/Put values */ + + struct xpc_gp *local_GP; /* local Get/Put values */ + struct xpc_gp remote_GP; /* remote Get/Put values */ + struct xpc_gp w_local_GP; /* working local Get/Put values */ + struct xpc_gp w_remote_GP; /* working remote Get/Put values */ + s64 next_msg_to_pull; /* Put value of next msg to pull */ + + struct mutex msg_to_pull_mutex; /* next msg to pull serialization */ +}; + +struct xpc_channel_uv { + /* >>> code is coming */ +}; + struct xpc_channel { short partid; /* ID of remote partition connected */ spinlock_t lock; /* lock for updating this structure */ @@ -407,20 +418,11 @@ struct xpc_channel { xpc_channel_func func; /* user's channel function */ void *key; /* pointer to user's key */ - struct mutex msg_to_pull_mutex; /* next msg to pull serialization */ struct completion wdisconnect_wait; /* wait for channel disconnect */ struct xpc_openclose_args *local_openclose_args; /* args passed on */ /* opening or closing of channel */ - /* various flavors of local and remote Get/Put values */ - - struct xpc_gp *local_GP; /* local Get/Put values */ - struct xpc_gp remote_GP; /* remote Get/Put values */ - struct xpc_gp w_local_GP; /* working local Get/Put values */ - struct xpc_gp w_remote_GP; /* working remote Get/Put values */ - s64 next_msg_to_pull; /* Put value of next msg to pull */ - /* kthread management related fields */ atomic_t kthreads_assigned; /* #of kthreads assigned to channel */ @@ -431,6 +433,11 @@ struct xpc_channel { wait_queue_head_t idle_wq; /* idle kthread wait queue */ + union { + struct xpc_channel_sn2 sn2; + struct xpc_channel_uv uv; + } sn; + } ____cacheline_aligned; /* struct xpc_channel flags */ @@ -467,6 +474,40 @@ struct xpc_channel { * for each partition (a partition will never utilize the structure that * represents itself). */ + +struct xpc_partition_sn2 { + u64 remote_amos_page_pa; /* phys addr of partition's amos page */ + int activate_IRQ_nasid; /* active partition's act/deact nasid */ + int activate_IRQ_phys_cpuid; /* active part's act/deact phys cpuid */ + + u64 remote_vars_pa; /* phys addr of partition's vars */ + u64 remote_vars_part_pa; /* phys addr of partition's vars part */ + u8 remote_vars_version; /* version# of partition's vars */ + + void *local_GPs_base; /* base address of kmalloc'd space */ + struct xpc_gp *local_GPs; /* local Get/Put values */ + void *remote_GPs_base; /* base address of kmalloc'd space */ + struct xpc_gp *remote_GPs; /* copy of remote partition's local */ + /* Get/Put values */ + u64 remote_GPs_pa; /* phys address of remote partition's local */ + /* Get/Put values */ + + u64 remote_openclose_args_pa; /* phys addr of remote's args */ + + int remote_IPI_nasid; /* nasid of where to send IPIs */ + int remote_IPI_phys_cpuid; /* phys CPU ID of where to send IPIs */ + char IPI_owner[8]; /* IPI owner's name */ + + AMO_t *remote_IPI_amo_va; /* address of remote IPI AMO_t structure */ + AMO_t *local_IPI_amo_va; /* address of IPI AMO_t structure */ + + struct timer_list dropped_notify_IRQ_timer; /* dropped IRQ timer */ +}; + +struct xpc_partition_uv { + /* >>> code is coming */ +}; + struct xpc_partition { /* XPC HB infrastructure */ @@ -474,22 +515,15 @@ struct xpc_partition { u8 remote_rp_version; /* version# of partition's rsvd pg */ unsigned long remote_rp_stamp; /* time when rsvd pg was initialized */ u64 remote_rp_pa; /* phys addr of partition's rsvd pg */ - u64 remote_vars_pa; /* phys addr of partition's vars */ - u64 remote_vars_part_pa; /* phys addr of partition's vars part */ u64 last_heartbeat; /* HB at last read */ - u64 remote_amos_page_pa; /* phys addr of partition's amos page */ - int remote_act_nasid; /* active part's act/deact nasid */ - int remote_act_phys_cpuid; /* active part's act/deact phys cpuid */ u32 activate_IRQ_rcvd; /* IRQs since activation */ spinlock_t act_lock; /* protect updating of act_state */ u8 act_state; /* from XPC HB viewpoint */ - u8 remote_vars_version; /* version# of partition's vars */ enum xp_retval reason; /* reason partition is deactivating */ int reason_line; /* line# deactivation initiated from */ - int reactivate_nasid; /* nasid in partition to reactivate */ - unsigned long disengage_request_timeout; /* timeout in jiffies */ - struct timer_list disengage_request_timer; + unsigned long disengage_timeout; /* timeout in jiffies */ + struct timer_list disengage_timer; /* XPC infrastructure referencing and teardown control */ @@ -502,14 +536,6 @@ struct xpc_partition { atomic_t nchannels_engaged; /* #of channels engaged with remote part */ struct xpc_channel *channels; /* array of channel structures */ - void *local_GPs_base; /* base address of kmalloc'd space */ - struct xpc_gp *local_GPs; /* local Get/Put values */ - void *remote_GPs_base; /* base address of kmalloc'd space */ - struct xpc_gp *remote_GPs; /* copy of remote partition's local */ - /* Get/Put values */ - u64 remote_GPs_pa; /* phys address of remote partition's local */ - /* Get/Put values */ - /* fields used to pass args when opening or closing a channel */ void *local_openclose_args_base; /* base address of kmalloc'd space */ @@ -517,19 +543,10 @@ struct xpc_partition { void *remote_openclose_args_base; /* base address of kmalloc'd space */ struct xpc_openclose_args *remote_openclose_args; /* copy of remote's */ /* args */ - u64 remote_openclose_args_pa; /* phys addr of remote's args */ /* IPI sending, receiving and handling related fields */ - int remote_IPI_nasid; /* nasid of where to send IPIs */ - int remote_IPI_phys_cpuid; /* phys CPU ID of where to send IPIs */ - AMO_t *remote_IPI_amo_va; /* address of remote IPI AMO_t structure */ - - AMO_t *local_IPI_amo_va; /* address of IPI AMO_t structure */ u64 local_IPI_amo; /* IPI amo flags yet to be handled */ - char IPI_owner[8]; /* IPI owner's name */ - struct timer_list dropped_IPI_timer; /* dropped IPI timer */ - spinlock_t IPI_lock; /* IPI handler lock */ /* channel manager related fields */ @@ -537,6 +554,11 @@ struct xpc_partition { atomic_t channel_mgr_requests; /* #of requests to activate chan mgr */ wait_queue_head_t channel_mgr_wq; /* channel mgr's wait queue */ + union { + struct xpc_partition_sn2 sn2; + struct xpc_partition_uv uv; + } sn; + } ____cacheline_aligned; /* struct xpc_partition act_state values (for XPC HB) */ @@ -565,10 +587,10 @@ struct xpc_partition { #define XPC_P_DROPPED_IPI_WAIT_INTERVAL (0.25 * HZ) /* number of seconds to wait for other partitions to disengage */ -#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT 90 +#define XPC_DISENGAGE_DEFAULT_TIMELIMIT 90 -/* interval in seconds to print 'waiting disengagement' messages */ -#define XPC_DISENGAGE_PRINTMSG_INTERVAL 10 +/* interval in seconds to print 'waiting deactivation' messages */ +#define XPC_DEACTIVATE_PRINTMSG_INTERVAL 10 #define XPC_PARTID(_p) ((short)((_p) - &xpc_partitions[0])) @@ -578,13 +600,11 @@ extern struct xpc_registration xpc_registrations[]; /* found in xpc_main.c */ extern struct device *xpc_part; extern struct device *xpc_chan; -extern int xpc_disengage_request_timelimit; -extern int xpc_disengage_request_timedout; +extern int xpc_disengage_timelimit; +extern int xpc_disengage_timedout; extern atomic_t xpc_activate_IRQ_rcvd; extern wait_queue_head_t xpc_activate_IRQ_wq; extern void *xpc_heartbeating_to_mask; -extern irqreturn_t xpc_notify_IRQ_handler(int, void *); -extern void xpc_dropped_IPI_check(struct xpc_partition *); extern void xpc_activate_partition(struct xpc_partition *); extern void xpc_activate_kthreads(struct xpc_channel *, int); extern void xpc_create_kthreads(struct xpc_channel *, int, int); @@ -598,31 +618,34 @@ extern void (*xpc_online_heartbeat) (void); extern void (*xpc_check_remote_hb) (void); extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *); extern u64 (*xpc_get_IPI_flags) (struct xpc_partition *); +extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *); +extern void (*xpc_process_msg_IPI) (struct xpc_partition *, int); +extern int (*xpc_n_of_deliverable_msgs) (struct xpc_channel *); extern struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *); -extern void (*xpc_initiate_partition_activation) (struct xpc_rsvd_page *, u64, - int); +extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *, u64, + int); +extern void (*xpc_request_partition_reactivation) (struct xpc_partition *); +extern void (*xpc_request_partition_deactivation) (struct xpc_partition *); +extern void (*xpc_cancel_partition_deactivation_request) ( + struct xpc_partition *); extern void (*xpc_process_activate_IRQ_rcvd) (int); extern enum xp_retval (*xpc_setup_infrastructure) (struct xpc_partition *); extern void (*xpc_teardown_infrastructure) (struct xpc_partition *); -extern void (*xpc_mark_partition_engaged) (struct xpc_partition *); -extern void (*xpc_mark_partition_disengaged) (struct xpc_partition *); -extern void (*xpc_request_partition_disengage) (struct xpc_partition *); -extern void (*xpc_cancel_partition_disengage_request) (struct xpc_partition *); -extern u64 (*xpc_partition_engaged) (u64); -extern u64 (*xpc_partition_disengage_requested) (u64);; -extern void (*xpc_clear_partition_engaged) (u64); -extern void (*xpc_clear_partition_disengage_request) (u64); - -extern void (*xpc_IPI_send_local_activate) (int); -extern void (*xpc_IPI_send_activated) (struct xpc_partition *); -extern void (*xpc_IPI_send_local_reactivate) (int); -extern void (*xpc_IPI_send_disengage) (struct xpc_partition *); - -extern void (*xpc_IPI_send_closerequest) (struct xpc_channel *, - unsigned long *); -extern void (*xpc_IPI_send_closereply) (struct xpc_channel *, unsigned long *); -extern void (*xpc_IPI_send_openrequest) (struct xpc_channel *, unsigned long *); -extern void (*xpc_IPI_send_openreply) (struct xpc_channel *, unsigned long *); + +extern void (*xpc_indicate_partition_engaged) (struct xpc_partition *); +extern int (*xpc_partition_engaged) (short); +extern int (*xpc_any_partition_engaged) (void); +extern void (*xpc_indicate_partition_disengaged) (struct xpc_partition *); +extern void (*xpc_assume_partition_disengaged) (short); + +extern void (*xpc_send_channel_closerequest) (struct xpc_channel *, + unsigned long *); +extern void (*xpc_send_channel_closereply) (struct xpc_channel *, + unsigned long *); +extern void (*xpc_send_channel_openrequest) (struct xpc_channel *, + unsigned long *); +extern void (*xpc_send_channel_openreply) (struct xpc_channel *, + unsigned long *); extern enum xp_retval (*xpc_send_msg) (struct xpc_channel *, u32, void *, u16, u8, xpc_notify_func, void *); @@ -646,8 +669,6 @@ extern char *xpc_remote_copy_buffer; extern void *xpc_remote_copy_buffer_base; extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **); extern struct xpc_rsvd_page *xpc_setup_rsvd_page(void); -extern void xpc_allow_IPI_ops(void); -extern void xpc_restrict_IPI_ops(void); extern int xpc_identify_activate_IRQ_sender(void); extern int xpc_partition_disengaged(struct xpc_partition *); extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *); diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 55182c8dd32..48b16136305 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -201,7 +201,7 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (!(ch->flags & XPC_C_OPENREPLY)) { ch->flags |= XPC_C_OPENREPLY; - xpc_IPI_send_openreply(ch, irq_flags); + xpc_send_channel_openreply(ch, irq_flags); } if (!(ch->flags & XPC_C_ROPENREPLY)) @@ -219,52 +219,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) spin_lock_irqsave(&ch->lock, *irq_flags); } -/* - * Notify those who wanted to be notified upon delivery of their message. - */ -static void -xpc_notify_senders(struct xpc_channel *ch, enum xp_retval reason, s64 put) -{ - struct xpc_notify *notify; - u8 notify_type; - s64 get = ch->w_remote_GP.get - 1; - - while (++get < put && atomic_read(&ch->n_to_notify) > 0) { - - notify = &ch->notify_queue[get % ch->local_nentries]; - - /* - * See if the notify entry indicates it was associated with - * a message who's sender wants to be notified. It is possible - * that it is, but someone else is doing or has done the - * notification. - */ - notify_type = notify->type; - if (notify_type == 0 || - cmpxchg(¬ify->type, notify_type, 0) != notify_type) { - continue; - } - - DBUG_ON(notify_type != XPC_N_CALL); - - atomic_dec(&ch->n_to_notify); - - if (notify->func != NULL) { - dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, " - "msg_number=%ld, partid=%d, channel=%d\n", - (void *)notify, get, ch->partid, ch->number); - - notify->func(reason, ch->partid, ch->number, - notify->key); - - dev_dbg(xpc_chan, "notify->func() returned, " - "notify=0x%p, msg_number=%ld, partid=%d, " - "channel=%d\n", (void *)notify, get, - ch->partid, ch->number); - } - } -} - /* * Free up message queues and other stuff that were allocated for the specified * channel. @@ -275,6 +229,8 @@ xpc_notify_senders(struct xpc_channel *ch, enum xp_retval reason, s64 put) static void xpc_free_msgqueues(struct xpc_channel *ch) { + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + DBUG_ON(!spin_is_locked(&ch->lock)); DBUG_ON(atomic_read(&ch->n_to_notify) != 0); @@ -287,15 +243,15 @@ xpc_free_msgqueues(struct xpc_channel *ch) ch->kthreads_assigned_limit = 0; ch->kthreads_idle_limit = 0; - ch->local_GP->get = 0; - ch->local_GP->put = 0; - ch->remote_GP.get = 0; - ch->remote_GP.put = 0; - ch->w_local_GP.get = 0; - ch->w_local_GP.put = 0; - ch->w_remote_GP.get = 0; - ch->w_remote_GP.put = 0; - ch->next_msg_to_pull = 0; + ch_sn2->local_GP->get = 0; + ch_sn2->local_GP->put = 0; + ch_sn2->remote_GP.get = 0; + ch_sn2->remote_GP.put = 0; + ch_sn2->w_local_GP.get = 0; + ch_sn2->w_local_GP.put = 0; + ch_sn2->w_remote_GP.get = 0; + ch_sn2->w_remote_GP.put = 0; + ch_sn2->next_msg_to_pull = 0; if (ch->flags & XPC_C_SETUP) { ch->flags &= ~XPC_C_SETUP; @@ -339,7 +295,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) if (part->act_state == XPC_P_DEACTIVATING) { /* can't proceed until the other side disengages from us */ - if (xpc_partition_engaged(1UL << ch->partid)) + if (xpc_partition_engaged(ch->partid)) return; } else { @@ -351,7 +307,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) if (!(ch->flags & XPC_C_CLOSEREPLY)) { ch->flags |= XPC_C_CLOSEREPLY; - xpc_IPI_send_closereply(ch, irq_flags); + xpc_send_channel_closereply(ch, irq_flags); } if (!(ch->flags & XPC_C_RCLOSEREPLY)) @@ -361,7 +317,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) /* wake those waiting for notify completion */ if (atomic_read(&ch->n_to_notify) > 0) { /* >>> we do callout while holding ch->lock */ - xpc_notify_senders(ch, ch->reason, ch->w_local_GP.put); + xpc_notify_senders_of_disconnect(ch); } /* both sides are disconnected now */ @@ -734,7 +690,7 @@ xpc_connect_channel(struct xpc_channel *ch) /* initiate the connection */ ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING); - xpc_IPI_send_openrequest(ch, &irq_flags); + xpc_send_channel_openrequest(ch, &irq_flags); xpc_process_connect(ch, &irq_flags); @@ -743,142 +699,6 @@ xpc_connect_channel(struct xpc_channel *ch) return xpSuccess; } -/* - * Clear some of the msg flags in the local message queue. - */ -static inline void -xpc_clear_local_msgqueue_flags(struct xpc_channel *ch) -{ - struct xpc_msg *msg; - s64 get; - - get = ch->w_remote_GP.get; - do { - msg = (struct xpc_msg *)((u64)ch->local_msgqueue + - (get % ch->local_nentries) * - ch->msg_size); - msg->flags = 0; - } while (++get < ch->remote_GP.get); -} - -/* - * Clear some of the msg flags in the remote message queue. - */ -static inline void -xpc_clear_remote_msgqueue_flags(struct xpc_channel *ch) -{ - struct xpc_msg *msg; - s64 put; - - put = ch->w_remote_GP.put; - do { - msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + - (put % ch->remote_nentries) * - ch->msg_size); - msg->flags = 0; - } while (++put < ch->remote_GP.put); -} - -static void -xpc_process_msg_IPI(struct xpc_partition *part, int ch_number) -{ - struct xpc_channel *ch = &part->channels[ch_number]; - int nmsgs_sent; - - ch->remote_GP = part->remote_GPs[ch_number]; - - /* See what, if anything, has changed for each connected channel */ - - xpc_msgqueue_ref(ch); - - if (ch->w_remote_GP.get == ch->remote_GP.get && - ch->w_remote_GP.put == ch->remote_GP.put) { - /* nothing changed since GPs were last pulled */ - xpc_msgqueue_deref(ch); - return; - } - - if (!(ch->flags & XPC_C_CONNECTED)) { - xpc_msgqueue_deref(ch); - return; - } - - /* - * First check to see if messages recently sent by us have been - * received by the other side. (The remote GET value will have - * changed since we last looked at it.) - */ - - if (ch->w_remote_GP.get != ch->remote_GP.get) { - - /* - * We need to notify any senders that want to be notified - * that their sent messages have been received by their - * intended recipients. We need to do this before updating - * w_remote_GP.get so that we don't allocate the same message - * queue entries prematurely (see xpc_allocate_msg()). - */ - if (atomic_read(&ch->n_to_notify) > 0) { - /* - * Notify senders that messages sent have been - * received and delivered by the other side. - */ - xpc_notify_senders(ch, xpMsgDelivered, - ch->remote_GP.get); - } - - /* - * Clear msg->flags in previously sent messages, so that - * they're ready for xpc_allocate_msg(). - */ - xpc_clear_local_msgqueue_flags(ch); - - ch->w_remote_GP.get = ch->remote_GP.get; - - dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, " - "channel=%d\n", ch->w_remote_GP.get, ch->partid, - ch->number); - - /* - * If anyone was waiting for message queue entries to become - * available, wake them up. - */ - if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) - wake_up(&ch->msg_allocate_wq); - } - - /* - * Now check for newly sent messages by the other side. (The remote - * PUT value will have changed since we last looked at it.) - */ - - if (ch->w_remote_GP.put != ch->remote_GP.put) { - /* - * Clear msg->flags in previously received messages, so that - * they're ready for xpc_get_deliverable_msg(). - */ - xpc_clear_remote_msgqueue_flags(ch); - - ch->w_remote_GP.put = ch->remote_GP.put; - - dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, " - "channel=%d\n", ch->w_remote_GP.put, ch->partid, - ch->number); - - nmsgs_sent = ch->w_remote_GP.put - ch->w_local_GP.get; - if (nmsgs_sent > 0) { - dev_dbg(xpc_chan, "msgs waiting to be copied and " - "delivered=%d, partid=%d, channel=%d\n", - nmsgs_sent, ch->partid, ch->number); - - if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) - xpc_activate_kthreads(ch, nmsgs_sent); - } - } - - xpc_msgqueue_deref(ch); -} - void xpc_process_channel_activity(struct xpc_partition *part) { @@ -1117,7 +937,7 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch, XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY | XPC_C_CONNECTING | XPC_C_CONNECTED); - xpc_IPI_send_closerequest(ch, irq_flags); + xpc_send_channel_closerequest(ch, irq_flags); if (channel_was_connected) ch->flags |= XPC_C_WASCONNECTED; diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 8780d5d00f6..563aaf4a2ff 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -26,7 +26,7 @@ * Caveats: * * . We currently have no way to determine which nasid an IPI came - * from. Thus, xpc_IPI_send() does a remote AMO write followed by + * from. Thus, >>> xpc_IPI_send() does a remote AMO write followed by * an IPI. The AMO indicates where data is to be pulled from, so * after the IPI arrives, the remote partition checks the AMO word. * The IPI can actually arrive before the AMO however, so other code @@ -89,9 +89,9 @@ static int xpc_hb_check_interval = XPC_HB_CHECK_DEFAULT_INTERVAL; static int xpc_hb_check_min_interval = 10; static int xpc_hb_check_max_interval = 120; -int xpc_disengage_request_timelimit = XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT; -static int xpc_disengage_request_min_timelimit; /* = 0 */ -static int xpc_disengage_request_max_timelimit = 120; +int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT; +static int xpc_disengage_min_timelimit; /* = 0 */ +static int xpc_disengage_max_timelimit = 120; static ctl_table xpc_sys_xpc_hb_dir[] = { { @@ -124,14 +124,14 @@ static ctl_table xpc_sys_xpc_dir[] = { .child = xpc_sys_xpc_hb_dir}, { .ctl_name = CTL_UNNUMBERED, - .procname = "disengage_request_timelimit", - .data = &xpc_disengage_request_timelimit, + .procname = "disengage_timelimit", + .data = &xpc_disengage_timelimit, .maxlen = sizeof(int), .mode = 0644, .proc_handler = &proc_dointvec_minmax, .strategy = &sysctl_intvec, - .extra1 = &xpc_disengage_request_min_timelimit, - .extra2 = &xpc_disengage_request_max_timelimit}, + .extra1 = &xpc_disengage_min_timelimit, + .extra2 = &xpc_disengage_max_timelimit}, {} }; static ctl_table xpc_sys_dir[] = { @@ -144,8 +144,8 @@ static ctl_table xpc_sys_dir[] = { }; static struct ctl_table_header *xpc_sysctl; -/* non-zero if any remote partition disengage request was timed out */ -int xpc_disengage_request_timedout; +/* non-zero if any remote partition disengage was timed out */ +int xpc_disengage_timedout; /* #of activate IRQs received */ atomic_t xpc_activate_IRQ_rcvd = ATOMIC_INIT(0); @@ -184,38 +184,36 @@ void (*xpc_online_heartbeat) (void); void (*xpc_check_remote_hb) (void); enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part); +void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch); u64 (*xpc_get_IPI_flags) (struct xpc_partition *part); +void (*xpc_process_msg_IPI) (struct xpc_partition *part, int ch_number); +int (*xpc_n_of_deliverable_msgs) (struct xpc_channel *ch); struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *ch); -void (*xpc_initiate_partition_activation) (struct xpc_rsvd_page *remote_rp, - u64 remote_rp_pa, int nasid); +void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp, + u64 remote_rp_pa, int nasid); +void (*xpc_request_partition_reactivation) (struct xpc_partition *part); +void (*xpc_request_partition_deactivation) (struct xpc_partition *part); +void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part); void (*xpc_process_activate_IRQ_rcvd) (int n_IRQs_expected); enum xp_retval (*xpc_setup_infrastructure) (struct xpc_partition *part); void (*xpc_teardown_infrastructure) (struct xpc_partition *part); -void (*xpc_mark_partition_engaged) (struct xpc_partition *part); -void (*xpc_mark_partition_disengaged) (struct xpc_partition *part); -void (*xpc_request_partition_disengage) (struct xpc_partition *part); -void (*xpc_cancel_partition_disengage_request) (struct xpc_partition *part); -u64 (*xpc_partition_engaged) (u64 partid_mask); -u64 (*xpc_partition_disengage_requested) (u64 partid_mask); -void (*xpc_clear_partition_engaged) (u64 partid_mask); -void (*xpc_clear_partition_disengage_request) (u64 partid_mask); - -void (*xpc_IPI_send_local_activate) (int from_nasid); -void (*xpc_IPI_send_activated) (struct xpc_partition *part); -void (*xpc_IPI_send_local_reactivate) (int from_nasid); -void (*xpc_IPI_send_disengage) (struct xpc_partition *part); - -void (*xpc_IPI_send_closerequest) (struct xpc_channel *ch, - unsigned long *irq_flags); -void (*xpc_IPI_send_closereply) (struct xpc_channel *ch, - unsigned long *irq_flags); -void (*xpc_IPI_send_openrequest) (struct xpc_channel *ch, - unsigned long *irq_flags); -void (*xpc_IPI_send_openreply) (struct xpc_channel *ch, - unsigned long *irq_flags); +void (*xpc_indicate_partition_engaged) (struct xpc_partition *part); +int (*xpc_partition_engaged) (short partid); +int (*xpc_any_partition_engaged) (void); +void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part); +void (*xpc_assume_partition_disengaged) (short partid); + +void (*xpc_send_channel_closerequest) (struct xpc_channel *ch, + unsigned long *irq_flags); +void (*xpc_send_channel_closereply) (struct xpc_channel *ch, + unsigned long *irq_flags); +void (*xpc_send_channel_openrequest) (struct xpc_channel *ch, + unsigned long *irq_flags); +void (*xpc_send_channel_openreply) (struct xpc_channel *ch, + unsigned long *irq_flags); enum xp_retval (*xpc_send_msg) (struct xpc_channel *ch, u32 flags, void *payload, u16 payload_size, u8 notify_type, @@ -223,19 +221,19 @@ enum xp_retval (*xpc_send_msg) (struct xpc_channel *ch, u32 flags, void (*xpc_received_msg) (struct xpc_channel *ch, struct xpc_msg *msg); /* - * Timer function to enforce the timelimit on the partition disengage request. + * Timer function to enforce the timelimit on the partition disengage. */ static void -xpc_timeout_partition_disengage_request(unsigned long data) +xpc_timeout_partition_disengage(unsigned long data) { struct xpc_partition *part = (struct xpc_partition *)data; - DBUG_ON(time_is_after_jiffies(part->disengage_request_timeout)); + DBUG_ON(time_is_after_jiffies(part->disengage_timeout)); (void)xpc_partition_disengaged(part); - DBUG_ON(part->disengage_request_timeout != 0); - DBUG_ON(xpc_partition_engaged(1UL << XPC_PARTID(part)) != 0); + DBUG_ON(part->disengage_timeout != 0); + DBUG_ON(xpc_partition_engaged(XPC_PARTID(part))); } /* @@ -464,7 +462,7 @@ xpc_activating(void *__partid) if (part->reason == xpReactivating) { /* interrupting ourselves results in activating partition */ - xpc_IPI_send_local_reactivate(part->reactivate_nasid); + xpc_request_partition_reactivation(part); } return 0; @@ -496,82 +494,6 @@ xpc_activate_partition(struct xpc_partition *part) } } -/* - * Check to see if there is any channel activity to/from the specified - * partition. - */ -static void -xpc_check_for_channel_activity(struct xpc_partition *part) -{ - u64 IPI_amo; - unsigned long irq_flags; - -/* this needs to be uncommented, but I'm thinking this function and the */ -/* ones that call it need to be moved into xpc_sn2.c... */ - IPI_amo = 0; /* = xpc_IPI_receive(part->local_IPI_amo_va); */ - if (IPI_amo == 0) - return; - - spin_lock_irqsave(&part->IPI_lock, irq_flags); - part->local_IPI_amo |= IPI_amo; - spin_unlock_irqrestore(&part->IPI_lock, irq_flags); - - dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n", - XPC_PARTID(part), IPI_amo); - - xpc_wakeup_channel_mgr(part); -} - -/* - * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified - * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more - * than one partition, we use an AMO_t structure per partition to indicate - * whether a partition has sent an IPI or not. If it has, then wake up the - * associated kthread to handle it. - * - * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IPIs sent by XPC - * running on other partitions. - * - * Noteworthy Arguments: - * - * irq - Interrupt ReQuest number. NOT USED. - * - * dev_id - partid of IPI's potential sender. - */ -irqreturn_t -xpc_notify_IRQ_handler(int irq, void *dev_id) -{ - short partid = (short)(u64)dev_id; - struct xpc_partition *part = &xpc_partitions[partid]; - - DBUG_ON(partid < 0 || partid >= xp_max_npartitions); - - if (xpc_part_ref(part)) { - xpc_check_for_channel_activity(part); - - xpc_part_deref(part); - } - return IRQ_HANDLED; -} - -/* - * Check to see if xpc_notify_IRQ_handler() dropped any IPIs on the floor - * because the write to their associated IPI amo completed after the IRQ/IPI - * was received. - */ -void -xpc_dropped_IPI_check(struct xpc_partition *part) -{ - if (xpc_part_ref(part)) { - xpc_check_for_channel_activity(part); - - part->dropped_IPI_timer.expires = jiffies + - XPC_P_DROPPED_IPI_WAIT_INTERVAL; - add_timer(&part->dropped_IPI_timer); - xpc_part_deref(part); - } -} - void xpc_activate_kthreads(struct xpc_channel *ch, int needed) { @@ -616,7 +538,7 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch) do { /* deliver messages to their intended recipients */ - while (ch->w_local_GP.get < ch->w_remote_GP.put && + while (xpc_n_of_deliverable_msgs(ch) > 0 && !(ch->flags & XPC_C_DISCONNECTING)) { xpc_deliver_msg(ch); } @@ -632,7 +554,7 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch) "wait_event_interruptible_exclusive()\n"); (void)wait_event_interruptible_exclusive(ch->idle_wq, - (ch->w_local_GP.get < ch->w_remote_GP.put || + (xpc_n_of_deliverable_msgs(ch) > 0 || (ch->flags & XPC_C_DISCONNECTING))); atomic_dec(&ch->kthreads_idle); @@ -677,7 +599,7 @@ xpc_kthread_start(void *args) * additional kthreads to help deliver them. We only * need one less than total #of messages to deliver. */ - n_needed = ch->w_remote_GP.put - ch->w_local_GP.get - 1; + n_needed = xpc_n_of_deliverable_msgs(ch) - 1; if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING)) xpc_activate_kthreads(ch, n_needed); @@ -703,11 +625,9 @@ xpc_kthread_start(void *args) } spin_unlock_irqrestore(&ch->lock, irq_flags); - if (atomic_dec_return(&ch->kthreads_assigned) == 0) { - if (atomic_dec_return(&part->nchannels_engaged) == 0) { - xpc_mark_partition_disengaged(part); - xpc_IPI_send_disengage(part); - } + if (atomic_dec_return(&ch->kthreads_assigned) == 0 && + atomic_dec_return(&part->nchannels_engaged) == 0) { + xpc_indicate_partition_disengaged(part); } xpc_msgqueue_deref(ch); @@ -758,9 +678,9 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed, } else if (ch->flags & XPC_C_DISCONNECTING) { break; - } else if (atomic_inc_return(&ch->kthreads_assigned) == 1) { - if (atomic_inc_return(&part->nchannels_engaged) == 1) - xpc_mark_partition_engaged(part); + } else if (atomic_inc_return(&ch->kthreads_assigned) == 1 && + atomic_inc_return(&part->nchannels_engaged) == 1) { + xpc_indicate_partition_engaged(part); } (void)xpc_part_ref(part); xpc_msgqueue_ref(ch); @@ -782,8 +702,7 @@ xpc_create_kthreads(struct xpc_channel *ch, int needed, if (atomic_dec_return(&ch->kthreads_assigned) == 0 && atomic_dec_return(&part->nchannels_engaged) == 0) { - xpc_mark_partition_disengaged(part); - xpc_IPI_send_disengage(part); + xpc_indicate_partition_disengaged(part); } xpc_msgqueue_deref(ch); xpc_part_deref(part); @@ -862,7 +781,7 @@ xpc_do_exit(enum xp_retval reason) short partid; int active_part_count, printed_waiting_msg = 0; struct xpc_partition *part; - unsigned long printmsg_time, disengage_request_timeout = 0; + unsigned long printmsg_time, disengage_timeout = 0; /* a 'rmmod XPC' and a 'reboot' cannot both end up here together */ DBUG_ON(xpc_exiting == 1); @@ -886,8 +805,8 @@ xpc_do_exit(enum xp_retval reason) /* wait for all partitions to become inactive */ - printmsg_time = jiffies + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ); - xpc_disengage_request_timedout = 0; + printmsg_time = jiffies + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ); + xpc_disengage_timedout = 0; do { active_part_count = 0; @@ -904,36 +823,32 @@ xpc_do_exit(enum xp_retval reason) XPC_DEACTIVATE_PARTITION(part, reason); - if (part->disengage_request_timeout > - disengage_request_timeout) { - disengage_request_timeout = - part->disengage_request_timeout; - } + if (part->disengage_timeout > disengage_timeout) + disengage_timeout = part->disengage_timeout; } - if (xpc_partition_engaged(-1UL)) { + if (xpc_any_partition_engaged()) { if (time_is_before_jiffies(printmsg_time)) { dev_info(xpc_part, "waiting for remote " - "partitions to disengage, timeout in " - "%ld seconds\n", - (disengage_request_timeout - jiffies) - / HZ); + "partitions to deactivate, timeout in " + "%ld seconds\n", (disengage_timeout - + jiffies) / HZ); printmsg_time = jiffies + - (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ); + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * HZ); printed_waiting_msg = 1; } } else if (active_part_count > 0) { if (printed_waiting_msg) { dev_info(xpc_part, "waiting for local partition" - " to disengage\n"); + " to deactivate\n"); printed_waiting_msg = 0; } } else { - if (!xpc_disengage_request_timedout) { + if (!xpc_disengage_timedout) { dev_info(xpc_part, "all partitions have " - "disengaged\n"); + "deactivated\n"); } break; } @@ -943,7 +858,7 @@ xpc_do_exit(enum xp_retval reason) } while (1); - DBUG_ON(xpc_partition_engaged(-1UL)); + DBUG_ON(xpc_any_partition_engaged()); DBUG_ON(xpc_any_hbs_allowed() != 0); /* indicate to others that our reserved page is uninitialized */ @@ -996,15 +911,16 @@ xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused) } /* - * Notify other partitions to disengage from all references to our memory. + * Notify other partitions to deactivate from us by first disengaging from all + * references to our memory. */ static void -xpc_die_disengage(void) +xpc_die_deactivate(void) { struct xpc_partition *part; short partid; - unsigned long engaged; - long time, printmsg_time, disengage_request_timeout; + int any_engaged; + long time, printmsg_time, disengage_timeout; /* keep xpc_hb_checker thread from doing anything (just in case) */ xpc_exiting = 1; @@ -1014,43 +930,37 @@ xpc_die_disengage(void) for (partid = 0; partid < xp_max_npartitions; partid++) { part = &xpc_partitions[partid]; - if (!XPC_SUPPORTS_DISENGAGE_REQUEST(part-> - remote_vars_version)) { - - /* just in case it was left set by an earlier XPC */ - xpc_clear_partition_engaged(1UL << partid); - continue; - } - - if (xpc_partition_engaged(1UL << partid) || + if (xpc_partition_engaged(partid) || part->act_state != XPC_P_INACTIVE) { - xpc_request_partition_disengage(part); - xpc_mark_partition_disengaged(part); - xpc_IPI_send_disengage(part); + xpc_request_partition_deactivation(part); + xpc_indicate_partition_disengaged(part); } } time = rtc_time(); printmsg_time = time + - (XPC_DISENGAGE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second); - disengage_request_timeout = time + - (xpc_disengage_request_timelimit * sn_rtc_cycles_per_second); + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second); + disengage_timeout = time + + (xpc_disengage_timelimit * sn_rtc_cycles_per_second); - /* wait for all other partitions to disengage from us */ + /* + * Though we requested that all other partitions deactivate from us, + * we only wait until they've all disengaged. + */ while (1) { - engaged = xpc_partition_engaged(-1UL); - if (!engaged) { - dev_info(xpc_part, "all partitions have disengaged\n"); + any_engaged = xpc_any_partition_engaged(); + if (!any_engaged) { + dev_info(xpc_part, "all partitions have deactivated\n"); break; } time = rtc_time(); - if (time >= disengage_request_timeout) { + if (time >= disengage_timeout) { for (partid = 0; partid < xp_max_npartitions; partid++) { - if (engaged & (1UL << partid)) { - dev_info(xpc_part, "disengage from " + if (xpc_partition_engaged(partid)) { + dev_info(xpc_part, "deactivate from " "remote partition %d timed " "out\n", partid); } @@ -1060,11 +970,11 @@ xpc_die_disengage(void) if (time >= printmsg_time) { dev_info(xpc_part, "waiting for remote partitions to " - "disengage, timeout in %ld seconds\n", - (disengage_request_timeout - time) / + "deactivate, timeout in %ld seconds\n", + (disengage_timeout - time) / sn_rtc_cycles_per_second); printmsg_time = time + - (XPC_DISENGAGE_PRINTMSG_INTERVAL * + (XPC_DEACTIVATE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second); } } @@ -1084,7 +994,7 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) switch (event) { case DIE_MACHINE_RESTART: case DIE_MACHINE_HALT: - xpc_die_disengage(); + xpc_die_deactivate(); break; case DIE_KDEBUG_ENTER: @@ -1183,10 +1093,10 @@ xpc_init(void) part->act_state = XPC_P_INACTIVE; XPC_SET_REASON(part, 0, 0); - init_timer(&part->disengage_request_timer); - part->disengage_request_timer.function = - xpc_timeout_partition_disengage_request; - part->disengage_request_timer.data = (unsigned long)part; + init_timer(&part->disengage_timer); + part->disengage_timer.function = + xpc_timeout_partition_disengage; + part->disengage_timer.data = (unsigned long)part; part->setup_state = XPC_P_UNSET; init_waitqueue_head(&part->teardown_wq); @@ -1295,9 +1205,9 @@ module_param(xpc_hb_check_interval, int, 0); MODULE_PARM_DESC(xpc_hb_check_interval, "Number of seconds between " "heartbeat checks."); -module_param(xpc_disengage_request_timelimit, int, 0); -MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait " - "for disengage request to complete."); +module_param(xpc_disengage_timelimit, int, 0); +MODULE_PARM_DESC(xpc_disengage_timelimit, "Number of seconds to wait " + "for disengage to complete."); module_param(xpc_kdebug_ignore, int, 0); MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by " diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index bf9b1193bd2..c769ab8f74e 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -242,7 +242,7 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, return xpBadVersion; } - /* check that both local and remote partids are valid for each side */ + /* check that both remote and local partids are valid for each side */ if (remote_rp->SAL_partid < 0 || remote_rp->SAL_partid >= xp_max_npartitions || remote_rp->max_npartitions <= sn_partition_id) { @@ -256,8 +256,9 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, } /* - * See if the other side has responded to a partition disengage request - * from us. + * See if the other side has responded to a partition deactivate request + * from us. Though we requested the remote partition to deactivate with regard + * to us, we really only need to wait for the other side to disengage from us. */ int xpc_partition_disengaged(struct xpc_partition *part) @@ -265,41 +266,37 @@ xpc_partition_disengaged(struct xpc_partition *part) short partid = XPC_PARTID(part); int disengaged; - disengaged = (xpc_partition_engaged(1UL << partid) == 0); - if (part->disengage_request_timeout) { + disengaged = !xpc_partition_engaged(partid); + if (part->disengage_timeout) { if (!disengaged) { - if (time_is_after_jiffies(part-> - disengage_request_timeout)) { + if (time_is_after_jiffies(part->disengage_timeout)) { /* timelimit hasn't been reached yet */ return 0; } /* - * Other side hasn't responded to our disengage + * Other side hasn't responded to our deactivate * request in a timely fashion, so assume it's dead. */ - dev_info(xpc_part, "disengage from remote partition %d " - "timed out\n", partid); - xpc_disengage_request_timedout = 1; - xpc_clear_partition_engaged(1UL << partid); + dev_info(xpc_part, "deactivate request to remote " + "partition %d timed out\n", partid); + xpc_disengage_timedout = 1; + xpc_assume_partition_disengaged(partid); disengaged = 1; } - part->disengage_request_timeout = 0; + part->disengage_timeout = 0; /* cancel the timer function, provided it's not us */ - if (!in_interrupt()) { - del_singleshot_timer_sync(&part-> - disengage_request_timer); - } + if (!in_interrupt()) + del_singleshot_timer_sync(&part->disengage_timer); DBUG_ON(part->act_state != XPC_P_DEACTIVATING && part->act_state != XPC_P_INACTIVE); if (part->act_state != XPC_P_INACTIVE) xpc_wakeup_channel_mgr(part); - if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) - xpc_cancel_partition_disengage_request(part); + xpc_cancel_partition_deactivation_request(part); } return disengaged; } @@ -329,7 +326,7 @@ xpc_mark_partition_active(struct xpc_partition *part) } /* - * Notify XPC that the partition is down. + * Start the process of deactivating the specified partition. */ void xpc_deactivate_partition(const int line, struct xpc_partition *part, @@ -344,7 +341,7 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, spin_unlock_irqrestore(&part->act_lock, irq_flags); if (reason == xpReactivating) { /* we interrupt ourselves to reactivate partition */ - xpc_IPI_send_local_reactivate(part->reactivate_nasid); + xpc_request_partition_reactivation(part); } return; } @@ -362,17 +359,13 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, spin_unlock_irqrestore(&part->act_lock, irq_flags); - if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) { - xpc_request_partition_disengage(part); - xpc_IPI_send_disengage(part); + /* ask remote partition to deactivate with regard to us */ + xpc_request_partition_deactivation(part); - /* set a timelimit on the disengage request */ - part->disengage_request_timeout = jiffies + - (xpc_disengage_request_timelimit * HZ); - part->disengage_request_timer.expires = - part->disengage_request_timeout; - add_timer(&part->disengage_request_timer); - } + /* set a timelimit on the disengage phase of the deactivation request */ + part->disengage_timeout = jiffies + (xpc_disengage_timelimit * HZ); + part->disengage_timer.expires = part->disengage_timeout; + add_timer(&part->disengage_timer); dev_dbg(xpc_part, "bringing partition %d down, reason = %d\n", XPC_PARTID(part), reason); @@ -505,8 +498,8 @@ xpc_discovery(void) continue; } - xpc_initiate_partition_activation(remote_rp, - remote_rp_pa, nasid); + xpc_request_partition_activation(remote_rp, + remote_rp_pa, nasid); } } diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 4659f6cb885..69d74bd5689 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -196,37 +196,85 @@ xpc_activate_IRQ_send_local_sn2(int from_nasid) wake_up_interruptible(&xpc_activate_IRQ_wq); } -static void -xpc_IPI_send_local_activate_sn2(int from_nasid) -{ - xpc_activate_IRQ_send_local_sn2(from_nasid); -} +/* + * IPIs associated with SGI_XPC_NOTIFY IRQ. + */ +/* + * Check to see if there is any channel activity to/from the specified + * partition. + */ static void -xpc_IPI_send_activated_sn2(struct xpc_partition *part) +xpc_check_for_channel_activity_sn2(struct xpc_partition *part) { - xpc_activate_IRQ_send_sn2(part->remote_amos_page_pa, - cnodeid_to_nasid(0), part->remote_act_nasid, - part->remote_act_phys_cpuid); -} + u64 IPI_amo; + unsigned long irq_flags; -static void -xpc_IPI_send_local_reactivate_sn2(int from_nasid) -{ - xpc_activate_IRQ_send_local_sn2(from_nasid); + IPI_amo = xpc_IPI_receive_sn2(part->sn.sn2.local_IPI_amo_va); + if (IPI_amo == 0) + return; + + spin_lock_irqsave(&part->IPI_lock, irq_flags); + part->local_IPI_amo |= IPI_amo; + spin_unlock_irqrestore(&part->IPI_lock, irq_flags); + + dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n", + XPC_PARTID(part), IPI_amo); + + xpc_wakeup_channel_mgr(part); } -static void -xpc_IPI_send_disengage_sn2(struct xpc_partition *part) +/* + * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified + * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more + * than one partition, we use an AMO_t structure per partition to indicate + * whether a partition has sent an IPI or not. If it has, then wake up the + * associated kthread to handle it. + * + * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IPIs sent by XPC + * running on other partitions. + * + * Noteworthy Arguments: + * + * irq - Interrupt ReQuest number. NOT USED. + * + * dev_id - partid of IPI's potential sender. + */ +static irqreturn_t +xpc_handle_notify_IRQ_sn2(int irq, void *dev_id) { - xpc_activate_IRQ_send_sn2(part->remote_amos_page_pa, - cnodeid_to_nasid(0), part->remote_act_nasid, - part->remote_act_phys_cpuid); + short partid = (short)(u64)dev_id; + struct xpc_partition *part = &xpc_partitions[partid]; + + DBUG_ON(partid < 0 || partid >= xp_max_npartitions); + + if (xpc_part_ref(part)) { + xpc_check_for_channel_activity_sn2(part); + + xpc_part_deref(part); + } + return IRQ_HANDLED; } /* - * IPIs associated with SGI_XPC_NOTIFY IRQ. + * Check to see if xpc_handle_notify_IRQ_sn2() dropped any IPIs on the floor + * because the write to their associated IPI amo completed after the IRQ/IPI + * was received. */ +static void +xpc_dropped_notify_IRQ_check_sn2(struct xpc_partition *part) +{ + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + + if (xpc_part_ref(part)) { + xpc_check_for_channel_activity_sn2(part); + + part_sn2->dropped_notify_IRQ_timer.expires = jiffies + + XPC_P_DROPPED_IPI_WAIT_INTERVAL; + add_timer(&part_sn2->dropped_notify_IRQ_timer); + xpc_part_deref(part); + } +} /* * Send an IPI to the remote partition that is associated with the @@ -237,13 +285,14 @@ xpc_notify_IRQ_send_sn2(struct xpc_channel *ch, u8 ipi_flag, char *ipi_flag_string, unsigned long *irq_flags) { struct xpc_partition *part = &xpc_partitions[ch->partid]; + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; enum xp_retval ret; if (likely(part->act_state != XPC_P_DEACTIVATING)) { - ret = xpc_IPI_send_sn2(part->remote_IPI_amo_va, + ret = xpc_IPI_send_sn2(part_sn2->remote_IPI_amo_va, (u64)ipi_flag << (ch->number * 8), - part->remote_IPI_nasid, - part->remote_IPI_phys_cpuid, + part_sn2->remote_IPI_nasid, + part_sn2->remote_IPI_phys_cpuid, SGI_XPC_NOTIFY); dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n", ipi_flag_string, ch->partid, ch->number, ret); @@ -263,7 +312,7 @@ xpc_notify_IRQ_send_sn2(struct xpc_channel *ch, u8 ipi_flag, /* * Make it look like the remote partition, which is associated with the * specified channel, sent us an IPI. This faked IPI will be handled - * by xpc_dropped_IPI_check(). + * by xpc_dropped_notify_IRQ_check_sn2(). */ static void xpc_notify_IRQ_send_local_sn2(struct xpc_channel *ch, u8 ipi_flag, @@ -271,7 +320,7 @@ xpc_notify_IRQ_send_local_sn2(struct xpc_channel *ch, u8 ipi_flag, { struct xpc_partition *part = &xpc_partitions[ch->partid]; - FETCHOP_STORE_OP(TO_AMO((u64)&part->local_IPI_amo_va->variable), + FETCHOP_STORE_OP(TO_AMO((u64)&part->sn.sn2.local_IPI_amo_va->variable), FETCHOP_OR, ((u64)ipi_flag << (ch->number * 8))); dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n", ipi_flag_string, ch->partid, ch->number); @@ -281,7 +330,8 @@ xpc_notify_IRQ_send_local_sn2(struct xpc_channel *ch, u8 ipi_flag, xpc_notify_IRQ_send_local_sn2(_ch, _ipi_f, #_ipi_f) static void -xpc_IPI_send_closerequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags) +xpc_send_channel_closerequest_sn2(struct xpc_channel *ch, + unsigned long *irq_flags) { struct xpc_openclose_args *args = ch->local_openclose_args; @@ -290,13 +340,15 @@ xpc_IPI_send_closerequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags) } static void -xpc_IPI_send_closereply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) +xpc_send_channel_closereply_sn2(struct xpc_channel *ch, + unsigned long *irq_flags) { XPC_NOTIFY_IRQ_SEND_SN2(ch, XPC_IPI_CLOSEREPLY, irq_flags); } static void -xpc_IPI_send_openrequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags) +xpc_send_channel_openrequest_sn2(struct xpc_channel *ch, + unsigned long *irq_flags) { struct xpc_openclose_args *args = ch->local_openclose_args; @@ -306,7 +358,7 @@ xpc_IPI_send_openrequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags) } static void -xpc_IPI_send_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) +xpc_send_channel_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) { struct xpc_openclose_args *args = ch->local_openclose_args; @@ -317,13 +369,13 @@ xpc_IPI_send_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) } static void -xpc_IPI_send_msgrequest_sn2(struct xpc_channel *ch) +xpc_send_channel_msgrequest_sn2(struct xpc_channel *ch) { XPC_NOTIFY_IRQ_SEND_SN2(ch, XPC_IPI_MSGREQUEST, NULL); } static void -xpc_IPI_send_local_msgrequest_sn2(struct xpc_channel *ch) +xpc_send_channel_local_msgrequest_sn2(struct xpc_channel *ch) { XPC_NOTIFY_IRQ_SEND_LOCAL_SN2(ch, XPC_IPI_MSGREQUEST); } @@ -334,10 +386,10 @@ xpc_IPI_send_local_msgrequest_sn2(struct xpc_channel *ch) */ static void -xpc_mark_partition_engaged_sn2(struct xpc_partition *part) +xpc_indicate_partition_engaged_sn2(struct xpc_partition *part) { unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + + AMO_t *amo = (AMO_t *)__va(part->sn.sn2.remote_amos_page_pa + (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t))); @@ -360,10 +412,11 @@ xpc_mark_partition_engaged_sn2(struct xpc_partition *part) } static void -xpc_mark_partition_disengaged_sn2(struct xpc_partition *part) +xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part) { + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + + AMO_t *amo = (AMO_t *)__va(part_sn2->remote_amos_page_pa + (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t))); @@ -383,96 +436,44 @@ xpc_mark_partition_disengaged_sn2(struct xpc_partition *part) xp_nofault_PIOR_target)); local_irq_restore(irq_flags); -} - -static void -xpc_request_partition_disengage_sn2(struct xpc_partition *part) -{ - unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + - (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); - - local_irq_save(irq_flags); - /* set bit corresponding to our partid in remote partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, - (1UL << sn_partition_id)); /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. + * Send activate IRQ to get other side to see that we've cleared our + * bit in their engaged partitions AMO. */ - (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> - variable), - xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); + xpc_activate_IRQ_send_sn2(part_sn2->remote_amos_page_pa, + cnodeid_to_nasid(0), + part_sn2->activate_IRQ_nasid, + part_sn2->activate_IRQ_phys_cpuid); } -static void -xpc_cancel_partition_disengage_request_sn2(struct xpc_partition *part) -{ - unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part->remote_amos_page_pa + - (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t))); - - local_irq_save(irq_flags); - - /* clear bit corresponding to our partid in remote partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~(1UL << sn_partition_id)); - /* - * We must always use the nofault function regardless of whether we - * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we - * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. - */ - (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> - variable), - xp_nofault_PIOR_target)); - - local_irq_restore(irq_flags); -} - -static u64 -xpc_partition_engaged_sn2(u64 partid_mask) +static int +xpc_partition_engaged_sn2(short partid) { AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; - /* return our partition's AMO variable ANDed with partid_mask */ + /* our partition's AMO variable ANDed with partid mask */ return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & - partid_mask); + (1UL << partid)) != 0; } -static u64 -xpc_partition_disengage_requested_sn2(u64 partid_mask) -{ - AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; - - /* return our partition's AMO variable ANDed with partid_mask */ - return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & - partid_mask); -} - -static void -xpc_clear_partition_engaged_sn2(u64 partid_mask) +static int +xpc_any_partition_engaged_sn2(void) { AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; - /* clear bit(s) based on partid_mask in our partition's AMO */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~partid_mask); + /* our partition's AMO variable */ + return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) != 0; } static void -xpc_clear_partition_disengage_request_sn2(u64 partid_mask) +xpc_assume_partition_disengaged_sn2(short partid) { - AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO; + AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; - /* clear bit(s) based on partid_mask in our partition's AMO */ + /* clear bit(s) based on partid mask in our partition's AMO */ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~partid_mask); + ~(1UL << partid)); } /* original protection values for each node */ @@ -545,7 +546,6 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) xpc_vars_part = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) + XPC_RP_VARS_SIZE); - /* * Before clearing xpc_vars, see if a page of AMOs had been previously * allocated. If not we'll need to allocate one and set permissions @@ -583,8 +583,8 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) memset(xpc_vars, 0, sizeof(struct xpc_vars_sn2)); xpc_vars->version = XPC_V_VERSION; - xpc_vars->act_nasid = cpuid_to_nasid(0); - xpc_vars->act_phys_cpuid = cpu_physical_id(0); + xpc_vars->activate_IRQ_nasid = cpuid_to_nasid(0); + xpc_vars->activate_IRQ_phys_cpuid = cpu_physical_id(0); xpc_vars->vars_part_pa = __pa(xpc_vars_part); xpc_vars->amos_page_pa = ia64_tpa((u64)amos_page); xpc_vars->amos_page = amos_page; /* save for next load of XPC */ @@ -599,7 +599,7 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) /* initialize the engaged remote partitions related AMO variables */ (void)xpc_IPI_init_sn2(XPC_ENGAGED_PARTITIONS_AMO); - (void)xpc_IPI_init_sn2(XPC_DISENGAGE_REQUEST_AMO); + (void)xpc_IPI_init_sn2(XPC_DEACTIVATE_REQUEST_AMO); return xpSuccess; } @@ -671,7 +671,7 @@ xpc_check_remote_hb_sn2(void) /* pull the remote_hb cache line */ ret = xp_remote_memcpy(remote_vars, - (void *)part->remote_vars_pa, + (void *)part->sn.sn2.remote_vars_pa, XPC_RP_VARS_SIZE); if (ret != xpSuccess) { XPC_DEACTIVATE_PARTITION(part, ret); @@ -726,10 +726,86 @@ xpc_get_remote_vars_sn2(u64 remote_vars_pa, struct xpc_vars_sn2 *remote_vars) } static void -xpc_initiate_partition_activation_sn2(struct xpc_rsvd_page *remote_rp, - u64 remote_rp_pa, int nasid) +xpc_request_partition_activation_sn2(struct xpc_rsvd_page *remote_rp, + u64 remote_rp_pa, int nasid) { - xpc_IPI_send_local_activate(nasid); + xpc_activate_IRQ_send_local_sn2(nasid); +} + +static void +xpc_request_partition_reactivation_sn2(struct xpc_partition *part) +{ + xpc_activate_IRQ_send_local_sn2(part->sn.sn2.activate_IRQ_nasid); +} + +static void +xpc_request_partition_deactivation_sn2(struct xpc_partition *part) +{ + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + unsigned long irq_flags; + AMO_t *amo = (AMO_t *)__va(part_sn2->remote_amos_page_pa + + (XPC_DEACTIVATE_REQUEST_AMO * sizeof(AMO_t))); + + local_irq_save(irq_flags); + + /* set bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, + (1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); + + /* + * Send activate IRQ to get other side to see that we've set our + * bit in their deactivate request AMO. + */ + xpc_activate_IRQ_send_sn2(part_sn2->remote_amos_page_pa, + cnodeid_to_nasid(0), + part_sn2->activate_IRQ_nasid, + part_sn2->activate_IRQ_phys_cpuid); +} + +static void +xpc_cancel_partition_deactivation_request_sn2(struct xpc_partition *part) +{ + unsigned long irq_flags; + AMO_t *amo = (AMO_t *)__va(part->sn.sn2.remote_amos_page_pa + + (XPC_DEACTIVATE_REQUEST_AMO * sizeof(AMO_t))); + + local_irq_save(irq_flags); + + /* clear bit corresponding to our partid in remote partition's AMO */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, + ~(1UL << sn_partition_id)); + /* + * We must always use the nofault function regardless of whether we + * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we + * didn't, we'd never know that the other partition is down and would + * keep sending IPIs and AMOs to it until the heartbeat times out. + */ + (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> + variable), + xp_nofault_PIOR_target)); + + local_irq_restore(irq_flags); +} + +static int +xpc_partition_deactivation_requested_sn2(short partid) +{ + AMO_t *amo = xpc_vars->amos_page + XPC_DEACTIVATE_REQUEST_AMO; + + /* our partition's AMO variable ANDed with partid mask */ + return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & + (1UL << partid)) != 0; } /* @@ -741,6 +817,8 @@ xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version, u64 remote_vars_pa, struct xpc_vars_sn2 *remote_vars) { + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + part->remote_rp_version = remote_rp_version; dev_dbg(xpc_part, " remote_rp_version = 0x%016x\n", part->remote_rp_version); @@ -752,33 +830,34 @@ xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version, part->remote_rp_pa = remote_rp_pa; dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa); - part->remote_vars_pa = remote_vars_pa; + part_sn2->remote_vars_pa = remote_vars_pa; dev_dbg(xpc_part, " remote_vars_pa = 0x%016lx\n", - part->remote_vars_pa); + part_sn2->remote_vars_pa); part->last_heartbeat = remote_vars->heartbeat; dev_dbg(xpc_part, " last_heartbeat = 0x%016lx\n", part->last_heartbeat); - part->remote_vars_part_pa = remote_vars->vars_part_pa; + part_sn2->remote_vars_part_pa = remote_vars->vars_part_pa; dev_dbg(xpc_part, " remote_vars_part_pa = 0x%016lx\n", - part->remote_vars_part_pa); + part_sn2->remote_vars_part_pa); - part->remote_act_nasid = remote_vars->act_nasid; - dev_dbg(xpc_part, " remote_act_nasid = 0x%x\n", - part->remote_act_nasid); + part_sn2->activate_IRQ_nasid = remote_vars->activate_IRQ_nasid; + dev_dbg(xpc_part, " activate_IRQ_nasid = 0x%x\n", + part_sn2->activate_IRQ_nasid); - part->remote_act_phys_cpuid = remote_vars->act_phys_cpuid; - dev_dbg(xpc_part, " remote_act_phys_cpuid = 0x%x\n", - part->remote_act_phys_cpuid); + part_sn2->activate_IRQ_phys_cpuid = + remote_vars->activate_IRQ_phys_cpuid; + dev_dbg(xpc_part, " activate_IRQ_phys_cpuid = 0x%x\n", + part_sn2->activate_IRQ_phys_cpuid); - part->remote_amos_page_pa = remote_vars->amos_page_pa; + part_sn2->remote_amos_page_pa = remote_vars->amos_page_pa; dev_dbg(xpc_part, " remote_amos_page_pa = 0x%lx\n", - part->remote_amos_page_pa); + part_sn2->remote_amos_page_pa); - part->remote_vars_version = remote_vars->version; + part_sn2->remote_vars_version = remote_vars->version; dev_dbg(xpc_part, " remote_vars_version = 0x%x\n", - part->remote_vars_version); + part_sn2->remote_vars_version); } /* @@ -807,6 +886,7 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) unsigned long remote_rp_stamp = 0; short partid; struct xpc_partition *part; + struct xpc_partition_sn2 *part_sn2; enum xp_retval ret; /* pull over the reserved page structure */ @@ -822,11 +902,11 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) remote_vars_pa = remote_rp->sn.vars_pa; remote_rp_version = remote_rp->version; - if (XPC_SUPPORTS_RP_STAMP(remote_rp_version)) - remote_rp_stamp = remote_rp->stamp; + remote_rp_stamp = remote_rp->stamp; partid = remote_rp->SAL_partid; part = &xpc_partitions[partid]; + part_sn2 = &part->sn.sn2; /* pull over the cross partition variables */ @@ -834,7 +914,6 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) ret = xpc_get_remote_vars_sn2(remote_vars_pa, remote_vars); if (ret != xpSuccess) { - dev_warn(xpc_part, "unable to get XPC variables from nasid %d, " "which sent interrupt, reason=%d\n", nasid, ret); @@ -855,18 +934,12 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) &remote_rp_stamp, remote_rp_pa, remote_vars_pa, remote_vars); - if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)) { - if (xpc_partition_disengage_requested(1UL << partid)) { - /* - * Other side is waiting on us to disengage, - * even though we already have. - */ - return; - } - - } else { - /* other side doesn't support disengage requests */ - xpc_clear_partition_disengage_request(1UL << partid); + if (xpc_partition_deactivation_requested_sn2(partid)) { + /* + * Other side is waiting on us to deactivate even though + * we already have. + */ + return; } xpc_activate_partition(part); @@ -874,93 +947,30 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) } DBUG_ON(part->remote_rp_version == 0); - DBUG_ON(part->remote_vars_version == 0); - - if (!XPC_SUPPORTS_RP_STAMP(part->remote_rp_version)) { - DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(part-> - remote_vars_version)); - - if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { - DBUG_ON(XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars-> - version)); - /* see if the other side rebooted */ - if (part->remote_amos_page_pa == - remote_vars->amos_page_pa && - xpc_hb_allowed(sn_partition_id, - &remote_vars->heartbeating_to_mask)) { - /* doesn't look that way, so ignore the IPI */ - return; - } - } + DBUG_ON(part_sn2->remote_vars_version == 0); - /* - * Other side rebooted and previous XPC didn't support the - * disengage request, so we don't need to do anything special. - */ + if (remote_rp_stamp != part->remote_rp_stamp) { - xpc_update_partition_info_sn2(part, remote_rp_version, - &remote_rp_stamp, remote_rp_pa, - remote_vars_pa, remote_vars); - part->reactivate_nasid = nasid; - XPC_DEACTIVATE_PARTITION(part, xpReactivating); - return; - } + /* the other side rebooted */ - DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version)); - - if (!XPC_SUPPORTS_RP_STAMP(remote_rp_version)) { - DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); - - /* - * Other side rebooted and previous XPC did support the - * disengage request, but the new one doesn't. - */ - - xpc_clear_partition_engaged(1UL << partid); - xpc_clear_partition_disengage_request(1UL << partid); + DBUG_ON(xpc_partition_engaged_sn2(partid)); + DBUG_ON(xpc_partition_deactivation_requested_sn2(partid)); xpc_update_partition_info_sn2(part, remote_rp_version, &remote_rp_stamp, remote_rp_pa, remote_vars_pa, remote_vars); reactivate = 1; - - } else { - DBUG_ON(!XPC_SUPPORTS_DISENGAGE_REQUEST(remote_vars->version)); - - if (remote_rp_stamp != part->remote_rp_stamp) { - - /* - * Other side rebooted and the previous XPC did support - * the disengage request, as does the new one. - */ - - DBUG_ON(xpc_partition_engaged(1UL << partid)); - DBUG_ON(xpc_partition_disengage_requested(1UL << - partid)); - - xpc_update_partition_info_sn2(part, remote_rp_version, - &remote_rp_stamp, - remote_rp_pa, - remote_vars_pa, - remote_vars); - reactivate = 1; - } } - if (part->disengage_request_timeout > 0 && - !xpc_partition_disengaged(part)) { + if (part->disengage_timeout > 0 && !xpc_partition_disengaged(part)) { /* still waiting on other side to disengage from us */ return; } - if (reactivate) { - part->reactivate_nasid = nasid; + if (reactivate) XPC_DEACTIVATE_PARTITION(part, xpReactivating); - - } else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) && - xpc_partition_disengage_requested(1UL << partid)) { + else if (xpc_partition_deactivation_requested_sn2(partid)) XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown); - } } /* @@ -1038,6 +1048,7 @@ xpc_process_activate_IRQ_rcvd_sn2(int n_IRQs_expected) static enum xp_retval xpc_setup_infrastructure_sn2(struct xpc_partition *part) { + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; enum xp_retval retval; int ret; int cpuid; @@ -1060,28 +1071,29 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) /* allocate all the required GET/PUT values */ - part->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, - GFP_KERNEL, - &part->local_GPs_base); - if (part->local_GPs == NULL) { + part_sn2->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, + GFP_KERNEL, + &part_sn2-> + local_GPs_base); + if (part_sn2->local_GPs == NULL) { dev_err(xpc_chan, "can't get memory for local get/put " "values\n"); retval = xpNoMemory; goto out_1; } - part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, - GFP_KERNEL, - &part-> - remote_GPs_base); - if (part->remote_GPs == NULL) { + part_sn2->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, + GFP_KERNEL, + &part_sn2-> + remote_GPs_base); + if (part_sn2->remote_GPs == NULL) { dev_err(xpc_chan, "can't get memory for remote get/put " "values\n"); retval = xpNoMemory; goto out_2; } - part->remote_GPs_pa = 0; + part_sn2->remote_GPs_pa = 0; /* allocate all the required open and close args */ @@ -1103,22 +1115,23 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) goto out_4; } - part->remote_openclose_args_pa = 0; + part_sn2->remote_openclose_args_pa = 0; - part->local_IPI_amo_va = xpc_IPI_init_sn2(partid); + part_sn2->local_IPI_amo_va = xpc_IPI_init_sn2(partid); part->local_IPI_amo = 0; spin_lock_init(&part->IPI_lock); - part->remote_IPI_nasid = 0; - part->remote_IPI_phys_cpuid = 0; - part->remote_IPI_amo_va = NULL; + part_sn2->remote_IPI_nasid = 0; + part_sn2->remote_IPI_phys_cpuid = 0; + part_sn2->remote_IPI_amo_va = NULL; atomic_set(&part->channel_mgr_requests, 1); init_waitqueue_head(&part->channel_mgr_wq); - sprintf(part->IPI_owner, "xpc%02d", partid); - ret = request_irq(SGI_XPC_NOTIFY, xpc_notify_IRQ_handler, IRQF_SHARED, - part->IPI_owner, (void *)(u64)partid); + sprintf(part_sn2->IPI_owner, "xpc%02d", partid); + ret = request_irq(SGI_XPC_NOTIFY, xpc_handle_notify_IRQ_sn2, + IRQF_SHARED, part_sn2->IPI_owner, + (void *)(u64)partid); if (ret != 0) { dev_err(xpc_chan, "can't register NOTIFY IRQ handler, " "errno=%d\n", -ret); @@ -1127,9 +1140,10 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) } /* Setup a timer to check for dropped IPIs */ - timer = &part->dropped_IPI_timer; + timer = &part_sn2->dropped_notify_IRQ_timer; init_timer(timer); - timer->function = (void (*)(unsigned long))xpc_dropped_IPI_check; + timer->function = + (void (*)(unsigned long))xpc_dropped_notify_IRQ_check_sn2; timer->data = (unsigned long)part; timer->expires = jiffies + XPC_P_DROPPED_IPI_WAIT_INTERVAL; add_timer(timer); @@ -1146,7 +1160,7 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) ch->number = ch_number; ch->flags = XPC_C_DISCONNECTED; - ch->local_GP = &part->local_GPs[ch_number]; + ch->sn.sn2.local_GP = &part_sn2->local_GPs[ch_number]; ch->local_openclose_args = &part->local_openclose_args[ch_number]; @@ -1158,7 +1172,7 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) atomic_set(&ch->n_to_notify, 0); spin_lock_init(&ch->lock); - mutex_init(&ch->msg_to_pull_mutex); + mutex_init(&ch->sn.sn2.msg_to_pull_mutex); init_completion(&ch->wdisconnect_wait); atomic_set(&ch->n_on_msg_allocate_wq, 0); @@ -1179,10 +1193,10 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) * The setting of the magic # indicates that these per partition * specific variables are ready to be used. */ - xpc_vars_part[partid].GPs_pa = __pa(part->local_GPs); + xpc_vars_part[partid].GPs_pa = __pa(part_sn2->local_GPs); xpc_vars_part[partid].openclose_args_pa = __pa(part->local_openclose_args); - xpc_vars_part[partid].IPI_amo_pa = __pa(part->local_IPI_amo_va); + xpc_vars_part[partid].IPI_amo_pa = __pa(part_sn2->local_IPI_amo_va); cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */ xpc_vars_part[partid].IPI_nasid = cpuid_to_nasid(cpuid); xpc_vars_part[partid].IPI_phys_cpuid = cpu_physical_id(cpuid); @@ -1199,11 +1213,11 @@ out_4: kfree(part->local_openclose_args_base); part->local_openclose_args = NULL; out_3: - kfree(part->remote_GPs_base); - part->remote_GPs = NULL; + kfree(part_sn2->remote_GPs_base); + part_sn2->remote_GPs = NULL; out_2: - kfree(part->local_GPs_base); - part->local_GPs = NULL; + kfree(part_sn2->local_GPs_base); + part_sn2->local_GPs = NULL; out_1: kfree(part->channels); part->channels = NULL; @@ -1217,6 +1231,7 @@ out_1: static void xpc_teardown_infrastructure_sn2(struct xpc_partition *part) { + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; short partid = XPC_PARTID(part); /* @@ -1248,19 +1263,19 @@ xpc_teardown_infrastructure_sn2(struct xpc_partition *part) part->setup_state = XPC_P_TORNDOWN; /* in case we've still got outstanding timers registered... */ - del_timer_sync(&part->dropped_IPI_timer); + del_timer_sync(&part_sn2->dropped_notify_IRQ_timer); kfree(part->remote_openclose_args_base); part->remote_openclose_args = NULL; kfree(part->local_openclose_args_base); part->local_openclose_args = NULL; - kfree(part->remote_GPs_base); - part->remote_GPs = NULL; - kfree(part->local_GPs_base); - part->local_GPs = NULL; + kfree(part_sn2->remote_GPs_base); + part_sn2->remote_GPs = NULL; + kfree(part_sn2->local_GPs_base); + part_sn2->local_GPs = NULL; kfree(part->channels); part->channels = NULL; - part->local_IPI_amo_va = NULL; + part_sn2->local_IPI_amo_va = NULL; } /* @@ -1300,6 +1315,7 @@ xpc_pull_remote_cachelines_sn2(struct xpc_partition *part, void *dst, static enum xp_retval xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) { + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; u8 buffer[L1_CACHE_BYTES * 2]; struct xpc_vars_part_sn2 *pulled_entry_cacheline = (struct xpc_vars_part_sn2 *)L1_CACHE_ALIGN((u64)buffer); @@ -1310,11 +1326,11 @@ xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) /* pull the cacheline that contains the variables we're interested in */ - DBUG_ON(part->remote_vars_part_pa != - L1_CACHE_ALIGN(part->remote_vars_part_pa)); + DBUG_ON(part_sn2->remote_vars_part_pa != + L1_CACHE_ALIGN(part_sn2->remote_vars_part_pa)); DBUG_ON(sizeof(struct xpc_vars_part_sn2) != L1_CACHE_BYTES / 2); - remote_entry_pa = part->remote_vars_part_pa + + remote_entry_pa = part_sn2->remote_vars_part_pa + sn_partition_id * sizeof(struct xpc_vars_part_sn2); remote_entry_cacheline_pa = (remote_entry_pa & ~(L1_CACHE_BYTES - 1)); @@ -1364,13 +1380,13 @@ xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) /* the variables we imported look to be valid */ - part->remote_GPs_pa = pulled_entry->GPs_pa; - part->remote_openclose_args_pa = + part_sn2->remote_GPs_pa = pulled_entry->GPs_pa; + part_sn2->remote_openclose_args_pa = pulled_entry->openclose_args_pa; - part->remote_IPI_amo_va = + part_sn2->remote_IPI_amo_va = (AMO_t *)__va(pulled_entry->IPI_amo_pa); - part->remote_IPI_nasid = pulled_entry->IPI_nasid; - part->remote_IPI_phys_cpuid = pulled_entry->IPI_phys_cpuid; + part_sn2->remote_IPI_nasid = pulled_entry->IPI_nasid; + part_sn2->remote_IPI_phys_cpuid = pulled_entry->IPI_phys_cpuid; if (part->nchannels > pulled_entry->nchannels) part->nchannels = pulled_entry->nchannels; @@ -1394,6 +1410,7 @@ xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) static enum xp_retval xpc_make_first_contact_sn2(struct xpc_partition *part) { + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; enum xp_retval ret; /* @@ -1406,7 +1423,7 @@ xpc_make_first_contact_sn2(struct xpc_partition *part) * we should get the same page for remote_amos_page_pa after module * reloads and system reboots. */ - if (sn_register_xp_addr_region(part->remote_amos_page_pa, + if (sn_register_xp_addr_region(part_sn2->remote_amos_page_pa, PAGE_SIZE, 1) < 0) { dev_warn(xpc_part, "xpc_activating(%d) failed to register " "xp_addr region\n", XPC_PARTID(part)); @@ -1416,7 +1433,14 @@ xpc_make_first_contact_sn2(struct xpc_partition *part) return ret; } - xpc_IPI_send_activated(part); + /* + * Send activate IRQ to get other side to activate if they've not + * already begun to do so. + */ + xpc_activate_IRQ_send_sn2(part_sn2->remote_amos_page_pa, + cnodeid_to_nasid(0), + part_sn2->activate_IRQ_nasid, + part_sn2->activate_IRQ_phys_cpuid); while ((ret = xpc_pull_remote_vars_part_sn2(part)) != xpSuccess) { if (ret != xpRetry) { @@ -1443,6 +1467,7 @@ xpc_make_first_contact_sn2(struct xpc_partition *part) static u64 xpc_get_IPI_flags_sn2(struct xpc_partition *part) { + struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; unsigned long irq_flags; u64 IPI_amo; enum xp_retval ret; @@ -1459,9 +1484,9 @@ xpc_get_IPI_flags_sn2(struct xpc_partition *part) spin_unlock_irqrestore(&part->IPI_lock, irq_flags); if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_amo)) { - ret = xpc_pull_remote_cachelines_sn2(part, - part->remote_openclose_args, - (void *)part-> + ret = xpc_pull_remote_cachelines_sn2(part, part-> + remote_openclose_args, + (void *)part_sn2-> remote_openclose_args_pa, XPC_OPENCLOSE_ARGS_SIZE); if (ret != xpSuccess) { @@ -1477,8 +1502,8 @@ xpc_get_IPI_flags_sn2(struct xpc_partition *part) } if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_amo)) { - ret = xpc_pull_remote_cachelines_sn2(part, part->remote_GPs, - (void *)part->remote_GPs_pa, + ret = xpc_pull_remote_cachelines_sn2(part, part_sn2->remote_GPs, + (void *)part_sn2->remote_GPs_pa, XPC_GP_SIZE); if (ret != xpSuccess) { XPC_DEACTIVATE_PARTITION(part, ret); @@ -1494,28 +1519,220 @@ xpc_get_IPI_flags_sn2(struct xpc_partition *part) return IPI_amo; } +/* + * Notify those who wanted to be notified upon delivery of their message. + */ +static void +xpc_notify_senders_sn2(struct xpc_channel *ch, enum xp_retval reason, s64 put) +{ + struct xpc_notify *notify; + u8 notify_type; + s64 get = ch->sn.sn2.w_remote_GP.get - 1; + + while (++get < put && atomic_read(&ch->n_to_notify) > 0) { + + notify = &ch->notify_queue[get % ch->local_nentries]; + + /* + * See if the notify entry indicates it was associated with + * a message who's sender wants to be notified. It is possible + * that it is, but someone else is doing or has done the + * notification. + */ + notify_type = notify->type; + if (notify_type == 0 || + cmpxchg(¬ify->type, notify_type, 0) != notify_type) { + continue; + } + + DBUG_ON(notify_type != XPC_N_CALL); + + atomic_dec(&ch->n_to_notify); + + if (notify->func != NULL) { + dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, " + "msg_number=%ld, partid=%d, channel=%d\n", + (void *)notify, get, ch->partid, ch->number); + + notify->func(reason, ch->partid, ch->number, + notify->key); + + dev_dbg(xpc_chan, "notify->func() returned, " + "notify=0x%p, msg_number=%ld, partid=%d, " + "channel=%d\n", (void *)notify, get, + ch->partid, ch->number); + } + } +} + +static void +xpc_notify_senders_of_disconnect_sn2(struct xpc_channel *ch) +{ + xpc_notify_senders_sn2(ch, ch->reason, ch->sn.sn2.w_local_GP.put); +} + +/* + * Clear some of the msg flags in the local message queue. + */ +static inline void +xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch) +{ + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + struct xpc_msg *msg; + s64 get; + + get = ch_sn2->w_remote_GP.get; + do { + msg = (struct xpc_msg *)((u64)ch->local_msgqueue + + (get % ch->local_nentries) * + ch->msg_size); + msg->flags = 0; + } while (++get < ch_sn2->remote_GP.get); +} + +/* + * Clear some of the msg flags in the remote message queue. + */ +static inline void +xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch) +{ + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + struct xpc_msg *msg; + s64 put; + + put = ch_sn2->w_remote_GP.put; + do { + msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + + (put % ch->remote_nentries) * + ch->msg_size); + msg->flags = 0; + } while (++put < ch_sn2->remote_GP.put); +} + +static void +xpc_process_msg_IPI_sn2(struct xpc_partition *part, int ch_number) +{ + struct xpc_channel *ch = &part->channels[ch_number]; + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + int nmsgs_sent; + + ch_sn2->remote_GP = part->sn.sn2.remote_GPs[ch_number]; + + /* See what, if anything, has changed for each connected channel */ + + xpc_msgqueue_ref(ch); + + if (ch_sn2->w_remote_GP.get == ch_sn2->remote_GP.get && + ch_sn2->w_remote_GP.put == ch_sn2->remote_GP.put) { + /* nothing changed since GPs were last pulled */ + xpc_msgqueue_deref(ch); + return; + } + + if (!(ch->flags & XPC_C_CONNECTED)) { + xpc_msgqueue_deref(ch); + return; + } + + /* + * First check to see if messages recently sent by us have been + * received by the other side. (The remote GET value will have + * changed since we last looked at it.) + */ + + if (ch_sn2->w_remote_GP.get != ch_sn2->remote_GP.get) { + + /* + * We need to notify any senders that want to be notified + * that their sent messages have been received by their + * intended recipients. We need to do this before updating + * w_remote_GP.get so that we don't allocate the same message + * queue entries prematurely (see xpc_allocate_msg()). + */ + if (atomic_read(&ch->n_to_notify) > 0) { + /* + * Notify senders that messages sent have been + * received and delivered by the other side. + */ + xpc_notify_senders_sn2(ch, xpMsgDelivered, + ch_sn2->remote_GP.get); + } + + /* + * Clear msg->flags in previously sent messages, so that + * they're ready for xpc_allocate_msg(). + */ + xpc_clear_local_msgqueue_flags_sn2(ch); + + ch_sn2->w_remote_GP.get = ch_sn2->remote_GP.get; + + dev_dbg(xpc_chan, "w_remote_GP.get changed to %ld, partid=%d, " + "channel=%d\n", ch_sn2->w_remote_GP.get, ch->partid, + ch->number); + + /* + * If anyone was waiting for message queue entries to become + * available, wake them up. + */ + if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) + wake_up(&ch->msg_allocate_wq); + } + + /* + * Now check for newly sent messages by the other side. (The remote + * PUT value will have changed since we last looked at it.) + */ + + if (ch_sn2->w_remote_GP.put != ch_sn2->remote_GP.put) { + /* + * Clear msg->flags in previously received messages, so that + * they're ready for xpc_get_deliverable_msg(). + */ + xpc_clear_remote_msgqueue_flags_sn2(ch); + + ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put; + + dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, " + "channel=%d\n", ch_sn2->w_remote_GP.put, ch->partid, + ch->number); + + nmsgs_sent = ch_sn2->w_remote_GP.put - ch_sn2->w_local_GP.get; + if (nmsgs_sent > 0) { + dev_dbg(xpc_chan, "msgs waiting to be copied and " + "delivered=%d, partid=%d, channel=%d\n", + nmsgs_sent, ch->partid, ch->number); + + if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) + xpc_activate_kthreads(ch, nmsgs_sent); + } + } + + xpc_msgqueue_deref(ch); +} + static struct xpc_msg * xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get) { struct xpc_partition *part = &xpc_partitions[ch->partid]; + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; struct xpc_msg *remote_msg, *msg; u32 msg_index, nmsgs; u64 msg_offset; enum xp_retval ret; - if (mutex_lock_interruptible(&ch->msg_to_pull_mutex) != 0) { + if (mutex_lock_interruptible(&ch_sn2->msg_to_pull_mutex) != 0) { /* we were interrupted by a signal */ return NULL; } - while (get >= ch->next_msg_to_pull) { + while (get >= ch_sn2->next_msg_to_pull) { /* pull as many messages as are ready and able to be pulled */ - msg_index = ch->next_msg_to_pull % ch->remote_nentries; + msg_index = ch_sn2->next_msg_to_pull % ch->remote_nentries; - DBUG_ON(ch->next_msg_to_pull >= ch->w_remote_GP.put); - nmsgs = ch->w_remote_GP.put - ch->next_msg_to_pull; + DBUG_ON(ch_sn2->next_msg_to_pull >= ch_sn2->w_remote_GP.put); + nmsgs = ch_sn2->w_remote_GP.put - ch_sn2->next_msg_to_pull; if (msg_index + nmsgs > ch->remote_nentries) { /* ignore the ones that wrap the msg queue for now */ nmsgs = ch->remote_nentries - msg_index; @@ -1532,19 +1749,19 @@ xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get) dev_dbg(xpc_chan, "failed to pull %d msgs starting with" " msg %ld from partition %d, channel=%d, " - "ret=%d\n", nmsgs, ch->next_msg_to_pull, + "ret=%d\n", nmsgs, ch_sn2->next_msg_to_pull, ch->partid, ch->number, ret); XPC_DEACTIVATE_PARTITION(part, ret); - mutex_unlock(&ch->msg_to_pull_mutex); + mutex_unlock(&ch_sn2->msg_to_pull_mutex); return NULL; } - ch->next_msg_to_pull += nmsgs; + ch_sn2->next_msg_to_pull += nmsgs; } - mutex_unlock(&ch->msg_to_pull_mutex); + mutex_unlock(&ch_sn2->msg_to_pull_mutex); /* return the message we were looking for */ msg_offset = (get % ch->remote_nentries) * ch->msg_size; @@ -1553,12 +1770,19 @@ xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get) return msg; } +static int +xpc_n_of_deliverable_msgs_sn2(struct xpc_channel *ch) +{ + return ch->sn.sn2.w_remote_GP.put - ch->sn.sn2.w_local_GP.get; +} + /* * Get a message to be delivered. */ static struct xpc_msg * xpc_get_deliverable_msg_sn2(struct xpc_channel *ch) { + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; struct xpc_msg *msg = NULL; s64 get; @@ -1566,9 +1790,9 @@ xpc_get_deliverable_msg_sn2(struct xpc_channel *ch) if (ch->flags & XPC_C_DISCONNECTING) break; - get = ch->w_local_GP.get; + get = ch_sn2->w_local_GP.get; rmb(); /* guarantee that .get loads before .put */ - if (get == ch->w_remote_GP.put) + if (get == ch_sn2->w_remote_GP.put) break; /* There are messages waiting to be pulled and delivered. @@ -1578,7 +1802,7 @@ xpc_get_deliverable_msg_sn2(struct xpc_channel *ch) * to try again for the next one. */ - if (cmpxchg(&ch->w_local_GP.get, get, get + 1) == get) { + if (cmpxchg(&ch_sn2->w_local_GP.get, get, get + 1) == get) { /* we got the entry referenced by get */ dev_dbg(xpc_chan, "w_local_GP.get changed to %ld, " @@ -1609,6 +1833,7 @@ xpc_get_deliverable_msg_sn2(struct xpc_channel *ch) static void xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) { + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; struct xpc_msg *msg; s64 put = initial_put + 1; int send_IPI = 0; @@ -1616,7 +1841,7 @@ xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) while (1) { while (1) { - if (put == ch->w_local_GP.put) + if (put == ch_sn2->w_local_GP.put) break; msg = (struct xpc_msg *)((u64)ch->local_msgqueue + @@ -1634,10 +1859,10 @@ xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) break; } - if (cmpxchg_rel(&ch->local_GP->put, initial_put, put) != + if (cmpxchg_rel(&ch_sn2->local_GP->put, initial_put, put) != initial_put) { /* someone else beat us to it */ - DBUG_ON(ch->local_GP->put < initial_put); + DBUG_ON(ch_sn2->local_GP->put < initial_put); break; } @@ -1657,7 +1882,7 @@ xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) } if (send_IPI) - xpc_IPI_send_msgrequest_sn2(ch); + xpc_send_channel_msgrequest_sn2(ch); } /* @@ -1668,6 +1893,7 @@ static enum xp_retval xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, struct xpc_msg **address_of_msg) { + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; struct xpc_msg *msg; enum xp_retval ret; s64 put; @@ -1681,9 +1907,9 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, while (1) { - put = ch->w_local_GP.put; + put = ch_sn2->w_local_GP.put; rmb(); /* guarantee that .put loads before .get */ - if (put - ch->w_remote_GP.get < ch->local_nentries) { + if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) { /* There are available message entries. We need to try * to secure one for ourselves. We'll do this by trying @@ -1691,7 +1917,8 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, * doesn't beat us to it. If they do, we'll have to * try again. */ - if (cmpxchg(&ch->w_local_GP.put, put, put + 1) == put) { + if (cmpxchg(&ch_sn2->w_local_GP.put, put, put + 1) == + put) { /* we got the entry referenced by put */ break; } @@ -1708,7 +1935,7 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, * GP values as if an IPI was sent by the other side. */ if (ret == xpTimeout) - xpc_IPI_send_local_msgrequest_sn2(ch); + xpc_send_channel_local_msgrequest_sn2(ch); if (flags & XPC_NOWAIT) return xpNoWait; @@ -1810,13 +2037,13 @@ xpc_send_msg_sn2(struct xpc_channel *ch, u32 flags, void *payload, /* * The preceding store of msg->flags must occur before the following - * load of ch->local_GP->put. + * load of local_GP->put. */ mb(); /* see if the message is next in line to be sent, if so send it */ - put = ch->local_GP->put; + put = ch->sn.sn2.local_GP->put; if (put == msg_number) xpc_send_msgs_sn2(ch, put); @@ -1833,6 +2060,7 @@ out_1: static void xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) { + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; struct xpc_msg *msg; s64 get = initial_get + 1; int send_IPI = 0; @@ -1840,7 +2068,7 @@ xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) while (1) { while (1) { - if (get == ch->w_local_GP.get) + if (get == ch_sn2->w_local_GP.get) break; msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + @@ -1859,10 +2087,10 @@ xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) break; } - if (cmpxchg_rel(&ch->local_GP->get, initial_get, get) != + if (cmpxchg_rel(&ch_sn2->local_GP->get, initial_get, get) != initial_get) { /* someone else beat us to it */ - DBUG_ON(ch->local_GP->get <= initial_get); + DBUG_ON(ch_sn2->local_GP->get <= initial_get); break; } @@ -1882,7 +2110,7 @@ xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) } if (send_IPI) - xpc_IPI_send_msgrequest_sn2(ch); + xpc_send_channel_msgrequest_sn2(ch); } static void @@ -1902,7 +2130,7 @@ xpc_received_msg_sn2(struct xpc_channel *ch, struct xpc_msg *msg) /* * The preceding store of msg->flags must occur before the following - * load of ch->local_GP->get. + * load of local_GP->get. */ mb(); @@ -1910,7 +2138,7 @@ xpc_received_msg_sn2(struct xpc_channel *ch, struct xpc_msg *msg) * See if this message is next in line to be acknowledged as having * been delivered. */ - get = ch->local_GP->get; + get = ch->sn.sn2.local_GP->get; if (get == msg_number) xpc_acknowledge_msgs_sn2(ch, get, msg->flags); } @@ -1928,36 +2156,35 @@ xpc_init_sn2(void) xpc_heartbeat_exit = xpc_heartbeat_exit_sn2; xpc_check_remote_hb = xpc_check_remote_hb_sn2; - xpc_initiate_partition_activation = - xpc_initiate_partition_activation_sn2; + xpc_request_partition_activation = xpc_request_partition_activation_sn2; + xpc_request_partition_reactivation = + xpc_request_partition_reactivation_sn2; + xpc_request_partition_deactivation = + xpc_request_partition_deactivation_sn2; + xpc_cancel_partition_deactivation_request = + xpc_cancel_partition_deactivation_request_sn2; + xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2; xpc_setup_infrastructure = xpc_setup_infrastructure_sn2; xpc_teardown_infrastructure = xpc_teardown_infrastructure_sn2; xpc_make_first_contact = xpc_make_first_contact_sn2; xpc_get_IPI_flags = xpc_get_IPI_flags_sn2; + xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2; + xpc_process_msg_IPI = xpc_process_msg_IPI_sn2; + xpc_n_of_deliverable_msgs = xpc_n_of_deliverable_msgs_sn2; xpc_get_deliverable_msg = xpc_get_deliverable_msg_sn2; - xpc_mark_partition_engaged = xpc_mark_partition_engaged_sn2; - xpc_mark_partition_disengaged = xpc_mark_partition_disengaged_sn2; - xpc_request_partition_disengage = xpc_request_partition_disengage_sn2; - xpc_cancel_partition_disengage_request = - xpc_cancel_partition_disengage_request_sn2; + xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2; xpc_partition_engaged = xpc_partition_engaged_sn2; - xpc_partition_disengage_requested = - xpc_partition_disengage_requested_sn2; - xpc_clear_partition_engaged = xpc_clear_partition_engaged_sn2; - xpc_clear_partition_disengage_request = - xpc_clear_partition_disengage_request_sn2; - - xpc_IPI_send_local_activate = xpc_IPI_send_local_activate_sn2; - xpc_IPI_send_activated = xpc_IPI_send_activated_sn2; - xpc_IPI_send_local_reactivate = xpc_IPI_send_local_reactivate_sn2; - xpc_IPI_send_disengage = xpc_IPI_send_disengage_sn2; - - xpc_IPI_send_closerequest = xpc_IPI_send_closerequest_sn2; - xpc_IPI_send_closereply = xpc_IPI_send_closereply_sn2; - xpc_IPI_send_openrequest = xpc_IPI_send_openrequest_sn2; - xpc_IPI_send_openreply = xpc_IPI_send_openreply_sn2; + xpc_any_partition_engaged = xpc_any_partition_engaged_sn2; + xpc_indicate_partition_disengaged = + xpc_indicate_partition_disengaged_sn2; + xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2; + + xpc_send_channel_closerequest = xpc_send_channel_closerequest_sn2; + xpc_send_channel_closereply = xpc_send_channel_closereply_sn2; + xpc_send_channel_openrequest = xpc_send_channel_openrequest_sn2; + xpc_send_channel_openreply = xpc_send_channel_openreply_sn2; xpc_send_msg = xpc_send_msg_sn2; xpc_received_msg = xpc_received_msg_sn2; diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 32c577b8d0d..c53b229cb04 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -63,8 +63,8 @@ xpc_heartbeat_exit_uv(void) } static void -xpc_initiate_partition_activation_uv(struct xpc_rsvd_page *remote_rp, - u64 remote_rp_pa, int nasid) +xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp, + u64 remote_rp_pa, int nasid) { short partid = remote_rp->SAL_partid; struct xpc_partition *part = &xpc_partitions[partid]; @@ -78,6 +78,12 @@ xpc_initiate_partition_activation_uv(struct xpc_rsvd_page *remote_rp, xpc_IPI_send_local_activate_uv(part); } +static void +xpc_request_partition_reactivation_uv(struct xpc_partition *part) +{ + xpc_IPI_send_local_activate_uv(part); +} + /* * Setup the infrastructure necessary to support XPartition Communication * between the specified remote partition and the local one. @@ -128,8 +134,9 @@ xpc_init_uv(void) xpc_increment_heartbeat = xpc_increment_heartbeat_uv; xpc_heartbeat_init = xpc_heartbeat_init_uv; xpc_heartbeat_exit = xpc_heartbeat_exit_uv; - xpc_initiate_partition_activation = - xpc_initiate_partition_activation_uv; + xpc_request_partition_activation = xpc_request_partition_activation_uv; + xpc_request_partition_reactivation = + xpc_request_partition_reactivation_uv; xpc_setup_infrastructure = xpc_setup_infrastructure_uv; xpc_teardown_infrastructure = xpc_teardown_infrastructure_uv; xpc_make_first_contact = xpc_make_first_contact_uv; -- GitLab From 7fb5e59d63deda89a8eefdbd5b3c8d622076afd4 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:10 -0700 Subject: [PATCH 0401/1024] sgi-xp: separate chctl_flags from XPC's notify IRQ Tie current IPI references to either XPC's notify IRQ or channel control flags. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc.h | 124 +++++++----- drivers/misc/sgi-xp/xpc_channel.c | 135 +++++++------- drivers/misc/sgi-xp/xpc_main.c | 59 +++--- drivers/misc/sgi-xp/xpc_sn2.c | 301 +++++++++++++++--------------- drivers/misc/sgi-xp/xpc_uv.c | 10 +- 5 files changed, 327 insertions(+), 302 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index b04cfbed958..26a1725f68a 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -186,9 +186,10 @@ struct xpc_vars_part_sn2 { u64 openclose_args_pa; /* physical address of open and close args */ u64 GPs_pa; /* physical address of Get/Put values */ - u64 IPI_amo_pa; /* physical address of IPI AMO_t structure */ - int IPI_nasid; /* nasid of where to send IPIs */ - int IPI_phys_cpuid; /* physical CPU ID of where to send IPIs */ + u64 chctl_amo_pa; /* physical address of chctl flags' AMO_t */ + + int notify_IRQ_nasid; /* nasid of where to send notify IRQs */ + int notify_IRQ_phys_cpuid; /* CPUID of where to send notify IRQs */ u8 nchannels; /* #of defined channels supported */ @@ -407,7 +408,7 @@ struct xpc_channel { atomic_t n_on_msg_allocate_wq; /* #on msg allocation wait queue */ wait_queue_head_t msg_allocate_wq; /* msg allocation wait queue */ - u8 delayed_IPI_flags; /* IPI flags received, but delayed */ + u8 delayed_chctl_flags; /* chctl flags received, but delayed */ /* action until channel disconnected */ /* queue of msg senders who want to be notified when msg received */ @@ -469,6 +470,54 @@ struct xpc_channel { 0x00020000 /* disconnecting callout completed */ #define XPC_C_WDISCONNECT 0x00040000 /* waiting for channel disconnect */ +/* + * The channel control flags (chctl) union consists of a 64-bit variable which + * is divided up into eight bytes, ordered from right to left. Byte zero + * pertains to channel 0, byte one to channel 1, and so on. Each channel's byte + * can have one or more of the chctl flags set in it. + */ + +union xpc_channel_ctl_flags { + u64 all_flags; + u8 flags[XPC_MAX_NCHANNELS]; +}; + +/* chctl flags */ +#define XPC_CHCTL_CLOSEREQUEST 0x01 +#define XPC_CHCTL_CLOSEREPLY 0x02 +#define XPC_CHCTL_OPENREQUEST 0x04 +#define XPC_CHCTL_OPENREPLY 0x08 +#define XPC_CHCTL_MSGREQUEST 0x10 + +#define XPC_OPENCLOSE_CHCTL_FLAGS \ + (XPC_CHCTL_CLOSEREQUEST | XPC_CHCTL_CLOSEREPLY | \ + XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY) +#define XPC_MSG_CHCTL_FLAGS XPC_CHCTL_MSGREQUEST + +static inline int +xpc_any_openclose_chctl_flags_set(union xpc_channel_ctl_flags *chctl) +{ + int ch_number; + + for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) { + if (chctl->flags[ch_number] & XPC_OPENCLOSE_CHCTL_FLAGS) + return 1; + } + return 0; +} + +static inline int +xpc_any_msg_chctl_flags_set(union xpc_channel_ctl_flags *chctl) +{ + int ch_number; + + for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++) { + if (chctl->flags[ch_number] & XPC_MSG_CHCTL_FLAGS) + return 1; + } + return 0; +} + /* * Manages channels on a partition basis. There is one of these structures * for each partition (a partition will never utilize the structure that @@ -494,12 +543,12 @@ struct xpc_partition_sn2 { u64 remote_openclose_args_pa; /* phys addr of remote's args */ - int remote_IPI_nasid; /* nasid of where to send IPIs */ - int remote_IPI_phys_cpuid; /* phys CPU ID of where to send IPIs */ - char IPI_owner[8]; /* IPI owner's name */ + int notify_IRQ_nasid; /* nasid of where to send notify IRQs */ + int notify_IRQ_phys_cpuid; /* CPUID of where to send notify IRQs */ + char notify_IRQ_owner[8]; /* notify IRQ's owner's name */ - AMO_t *remote_IPI_amo_va; /* address of remote IPI AMO_t structure */ - AMO_t *local_IPI_amo_va; /* address of IPI AMO_t structure */ + AMO_t *remote_chctl_amo_va; /* address of remote chctl flags' AMO_t */ + AMO_t *local_chctl_amo_va; /* address of chctl flags' AMO_t */ struct timer_list dropped_notify_IRQ_timer; /* dropped IRQ timer */ }; @@ -536,7 +585,10 @@ struct xpc_partition { atomic_t nchannels_engaged; /* #of channels engaged with remote part */ struct xpc_channel *channels; /* array of channel structures */ - /* fields used to pass args when opening or closing a channel */ + /* fields used for managing channel avialability and activity */ + + union xpc_channel_ctl_flags chctl; /* chctl flags yet to be processed */ + spinlock_t chctl_lock; /* chctl flags lock */ void *local_openclose_args_base; /* base address of kmalloc'd space */ struct xpc_openclose_args *local_openclose_args; /* local's args */ @@ -544,11 +596,6 @@ struct xpc_partition { struct xpc_openclose_args *remote_openclose_args; /* copy of remote's */ /* args */ - /* IPI sending, receiving and handling related fields */ - - u64 local_IPI_amo; /* IPI amo flags yet to be handled */ - spinlock_t IPI_lock; /* IPI handler lock */ - /* channel manager related fields */ atomic_t channel_mgr_requests; /* #of requests to activate chan mgr */ @@ -580,11 +627,12 @@ struct xpc_partition { #define XPC_P_TORNDOWN 0x03 /* infrastructure is torndown */ /* - * struct xpc_partition IPI_timer #of seconds to wait before checking for - * dropped IPIs. These occur whenever an IPI amo write doesn't complete until - * after the IPI was received. + * struct xpc_partition_sn2's dropped notify IRQ timer is set to wait the + * following interval #of seconds before checking for dropped notify IRQs. + * These can occur whenever an IRQ's associated amo write doesn't complete + * until after the IRQ was received. */ -#define XPC_P_DROPPED_IPI_WAIT_INTERVAL (0.25 * HZ) +#define XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL (0.25 * HZ) /* number of seconds to wait for other partitions to disengage */ #define XPC_DISENGAGE_DEFAULT_TIMELIMIT 90 @@ -617,9 +665,9 @@ extern void (*xpc_offline_heartbeat) (void); extern void (*xpc_online_heartbeat) (void); extern void (*xpc_check_remote_hb) (void); extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *); -extern u64 (*xpc_get_IPI_flags) (struct xpc_partition *); +extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *); extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *); -extern void (*xpc_process_msg_IPI) (struct xpc_partition *, int); +extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int); extern int (*xpc_n_of_deliverable_msgs) (struct xpc_channel *); extern struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *); extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *, u64, @@ -638,14 +686,13 @@ extern int (*xpc_any_partition_engaged) (void); extern void (*xpc_indicate_partition_disengaged) (struct xpc_partition *); extern void (*xpc_assume_partition_disengaged) (short); -extern void (*xpc_send_channel_closerequest) (struct xpc_channel *, - unsigned long *); -extern void (*xpc_send_channel_closereply) (struct xpc_channel *, +extern void (*xpc_send_chctl_closerequest) (struct xpc_channel *, unsigned long *); -extern void (*xpc_send_channel_openrequest) (struct xpc_channel *, - unsigned long *); -extern void (*xpc_send_channel_openreply) (struct xpc_channel *, +extern void (*xpc_send_chctl_closereply) (struct xpc_channel *, + unsigned long *); +extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *, unsigned long *); +extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *); extern enum xp_retval (*xpc_send_msg) (struct xpc_channel *, u32, void *, u16, u8, xpc_notify_func, void *); @@ -689,7 +736,7 @@ extern enum xp_retval xpc_initiate_send(short, int, u32, void *, u16); extern enum xp_retval xpc_initiate_send_notify(short, int, u32, void *, u16, xpc_notify_func, void *); extern void xpc_initiate_received(short, int, void *); -extern void xpc_process_channel_activity(struct xpc_partition *); +extern void xpc_process_sent_chctl_flags(struct xpc_partition *); extern void xpc_connected_callout(struct xpc_channel *); extern void xpc_deliver_msg(struct xpc_channel *); extern void xpc_disconnect_channel(const int, struct xpc_channel *, @@ -799,25 +846,4 @@ xpc_part_ref(struct xpc_partition *part) (_p)->reason_line = _line; \ } -/* - * The sending and receiving of IPIs includes the setting of an >>>AMO variable - * to indicate the reason the IPI was sent. The 64-bit variable is divided - * up into eight bytes, ordered from right to left. Byte zero pertains to - * channel 0, byte one to channel 1, and so on. Each byte is described by - * the following IPI flags. - */ - -#define XPC_IPI_CLOSEREQUEST 0x01 -#define XPC_IPI_CLOSEREPLY 0x02 -#define XPC_IPI_OPENREQUEST 0x04 -#define XPC_IPI_OPENREPLY 0x08 -#define XPC_IPI_MSGREQUEST 0x10 - -/* given an >>>AMO variable and a channel#, get its associated IPI flags */ -#define XPC_GET_IPI_FLAGS(_amo, _c) ((u8) (((_amo) >> ((_c) * 8)) & 0xff)) -#define XPC_SET_IPI_FLAGS(_amo, _c, _f) (_amo) |= ((u64) (_f) << ((_c) * 8)) - -#define XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0fUL) -#define XPC_ANY_MSG_IPI_FLAGS_SET(_amo) ((_amo) & 0x1010101010101010UL) - #endif /* _DRIVERS_MISC_SGIXP_XPC_H */ diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 48b16136305..0d3c153d1d0 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -201,7 +201,7 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (!(ch->flags & XPC_C_OPENREPLY)) { ch->flags |= XPC_C_OPENREPLY; - xpc_send_channel_openreply(ch, irq_flags); + xpc_send_chctl_openreply(ch, irq_flags); } if (!(ch->flags & XPC_C_ROPENREPLY)) @@ -307,7 +307,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) if (!(ch->flags & XPC_C_CLOSEREPLY)) { ch->flags |= XPC_C_CLOSEREPLY; - xpc_send_channel_closereply(ch, irq_flags); + xpc_send_chctl_closereply(ch, irq_flags); } if (!(ch->flags & XPC_C_RCLOSEREPLY)) @@ -344,15 +344,15 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) if (ch->flags & XPC_C_WDISCONNECT) { /* we won't lose the CPU since we're holding ch->lock */ complete(&ch->wdisconnect_wait); - } else if (ch->delayed_IPI_flags) { + } else if (ch->delayed_chctl_flags) { if (part->act_state != XPC_P_DEACTIVATING) { - /* time to take action on any delayed IPI flags */ - spin_lock(&part->IPI_lock); - XPC_SET_IPI_FLAGS(part->local_IPI_amo, ch->number, - ch->delayed_IPI_flags); - spin_unlock(&part->IPI_lock); + /* time to take action on any delayed chctl flags */ + spin_lock(&part->chctl_lock); + part->chctl.flags[ch->number] |= + ch->delayed_chctl_flags; + spin_unlock(&part->chctl_lock); } - ch->delayed_IPI_flags = 0; + ch->delayed_chctl_flags = 0; } } @@ -360,8 +360,8 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) * Process a change in the channel's remote connection state. */ static void -xpc_process_openclose_IPI(struct xpc_partition *part, int ch_number, - u8 IPI_flags) +xpc_process_openclose_chctl_flags(struct xpc_partition *part, int ch_number, + u8 chctl_flags) { unsigned long irq_flags; struct xpc_openclose_args *args = @@ -376,24 +376,24 @@ again: if ((ch->flags & XPC_C_DISCONNECTED) && (ch->flags & XPC_C_WDISCONNECT)) { /* - * Delay processing IPI flags until thread waiting disconnect + * Delay processing chctl flags until thread waiting disconnect * has had a chance to see that the channel is disconnected. */ - ch->delayed_IPI_flags |= IPI_flags; + ch->delayed_chctl_flags |= chctl_flags; spin_unlock_irqrestore(&ch->lock, irq_flags); return; } - if (IPI_flags & XPC_IPI_CLOSEREQUEST) { + if (chctl_flags & XPC_CHCTL_CLOSEREQUEST) { - dev_dbg(xpc_chan, "XPC_IPI_CLOSEREQUEST (reason=%d) received " + dev_dbg(xpc_chan, "XPC_CHCTL_CLOSEREQUEST (reason=%d) received " "from partid=%d, channel=%d\n", args->reason, ch->partid, ch->number); /* * If RCLOSEREQUEST is set, we're probably waiting for * RCLOSEREPLY. We should find it and a ROPENREQUEST packed - * with this RCLOSEREQUEST in the IPI_flags. + * with this RCLOSEREQUEST in the chctl_flags. */ if (ch->flags & XPC_C_RCLOSEREQUEST) { @@ -402,8 +402,8 @@ again: DBUG_ON(!(ch->flags & XPC_C_CLOSEREPLY)); DBUG_ON(ch->flags & XPC_C_RCLOSEREPLY); - DBUG_ON(!(IPI_flags & XPC_IPI_CLOSEREPLY)); - IPI_flags &= ~XPC_IPI_CLOSEREPLY; + DBUG_ON(!(chctl_flags & XPC_CHCTL_CLOSEREPLY)); + chctl_flags &= ~XPC_CHCTL_CLOSEREPLY; ch->flags |= XPC_C_RCLOSEREPLY; /* both sides have finished disconnecting */ @@ -413,17 +413,15 @@ again: } if (ch->flags & XPC_C_DISCONNECTED) { - if (!(IPI_flags & XPC_IPI_OPENREQUEST)) { - if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, - ch_number) & - XPC_IPI_OPENREQUEST)) { - - DBUG_ON(ch->delayed_IPI_flags != 0); - spin_lock(&part->IPI_lock); - XPC_SET_IPI_FLAGS(part->local_IPI_amo, - ch_number, - XPC_IPI_CLOSEREQUEST); - spin_unlock(&part->IPI_lock); + if (!(chctl_flags & XPC_CHCTL_OPENREQUEST)) { + if (part->chctl.flags[ch_number] & + XPC_CHCTL_OPENREQUEST) { + + DBUG_ON(ch->delayed_chctl_flags != 0); + spin_lock(&part->chctl_lock); + part->chctl.flags[ch_number] |= + XPC_CHCTL_CLOSEREQUEST; + spin_unlock(&part->chctl_lock); } spin_unlock_irqrestore(&ch->lock, irq_flags); return; @@ -436,7 +434,7 @@ again: ch->flags |= (XPC_C_CONNECTING | XPC_C_ROPENREQUEST); } - IPI_flags &= ~(XPC_IPI_OPENREQUEST | XPC_IPI_OPENREPLY); + chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY); /* * The meaningful CLOSEREQUEST connection state fields are: @@ -454,7 +452,7 @@ again: XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags); - DBUG_ON(IPI_flags & XPC_IPI_CLOSEREPLY); + DBUG_ON(chctl_flags & XPC_CHCTL_CLOSEREPLY); spin_unlock_irqrestore(&ch->lock, irq_flags); return; } @@ -462,10 +460,10 @@ again: xpc_process_disconnect(ch, &irq_flags); } - if (IPI_flags & XPC_IPI_CLOSEREPLY) { + if (chctl_flags & XPC_CHCTL_CLOSEREPLY) { - dev_dbg(xpc_chan, "XPC_IPI_CLOSEREPLY received from partid=%d," - " channel=%d\n", ch->partid, ch->number); + dev_dbg(xpc_chan, "XPC_CHCTL_CLOSEREPLY received from partid=" + "%d, channel=%d\n", ch->partid, ch->number); if (ch->flags & XPC_C_DISCONNECTED) { DBUG_ON(part->act_state != XPC_P_DEACTIVATING); @@ -476,15 +474,14 @@ again: DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST)); if (!(ch->flags & XPC_C_RCLOSEREQUEST)) { - if ((XPC_GET_IPI_FLAGS(part->local_IPI_amo, ch_number) - & XPC_IPI_CLOSEREQUEST)) { - - DBUG_ON(ch->delayed_IPI_flags != 0); - spin_lock(&part->IPI_lock); - XPC_SET_IPI_FLAGS(part->local_IPI_amo, - ch_number, - XPC_IPI_CLOSEREPLY); - spin_unlock(&part->IPI_lock); + if (part->chctl.flags[ch_number] & + XPC_CHCTL_CLOSEREQUEST) { + + DBUG_ON(ch->delayed_chctl_flags != 0); + spin_lock(&part->chctl_lock); + part->chctl.flags[ch_number] |= + XPC_CHCTL_CLOSEREPLY; + spin_unlock(&part->chctl_lock); } spin_unlock_irqrestore(&ch->lock, irq_flags); return; @@ -498,9 +495,9 @@ again: } } - if (IPI_flags & XPC_IPI_OPENREQUEST) { + if (chctl_flags & XPC_CHCTL_OPENREQUEST) { - dev_dbg(xpc_chan, "XPC_IPI_OPENREQUEST (msg_size=%d, " + dev_dbg(xpc_chan, "XPC_CHCTL_OPENREQUEST (msg_size=%d, " "local_nentries=%d) received from partid=%d, " "channel=%d\n", args->msg_size, args->local_nentries, ch->partid, ch->number); @@ -512,7 +509,7 @@ again: } if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) { - ch->delayed_IPI_flags |= XPC_IPI_OPENREQUEST; + ch->delayed_chctl_flags |= XPC_CHCTL_OPENREQUEST; spin_unlock_irqrestore(&ch->lock, irq_flags); return; } @@ -554,13 +551,13 @@ again: xpc_process_connect(ch, &irq_flags); } - if (IPI_flags & XPC_IPI_OPENREPLY) { + if (chctl_flags & XPC_CHCTL_OPENREPLY) { - dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY (local_msgqueue_pa=0x%lx, " - "local_nentries=%d, remote_nentries=%d) received from " - "partid=%d, channel=%d\n", args->local_msgqueue_pa, - args->local_nentries, args->remote_nentries, - ch->partid, ch->number); + dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY (local_msgqueue_pa=" + "0x%lx, local_nentries=%d, remote_nentries=%d) " + "received from partid=%d, channel=%d\n", + args->local_msgqueue_pa, args->local_nentries, + args->remote_nentries, ch->partid, ch->number); if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) { spin_unlock_irqrestore(&ch->lock, irq_flags); @@ -591,7 +588,7 @@ again: ch->remote_msgqueue_pa = args->local_msgqueue_pa; if (args->local_nentries < ch->remote_nentries) { - dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new " + dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new " "remote_nentries=%d, old remote_nentries=%d, " "partid=%d, channel=%d\n", args->local_nentries, ch->remote_nentries, @@ -600,7 +597,7 @@ again: ch->remote_nentries = args->local_nentries; } if (args->remote_nentries < ch->local_nentries) { - dev_dbg(xpc_chan, "XPC_IPI_OPENREPLY: new " + dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new " "local_nentries=%d, old local_nentries=%d, " "partid=%d, channel=%d\n", args->remote_nentries, ch->local_nentries, @@ -690,7 +687,7 @@ xpc_connect_channel(struct xpc_channel *ch) /* initiate the connection */ ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING); - xpc_send_channel_openrequest(ch, &irq_flags); + xpc_send_chctl_openrequest(ch, &irq_flags); xpc_process_connect(ch, &irq_flags); @@ -700,15 +697,15 @@ xpc_connect_channel(struct xpc_channel *ch) } void -xpc_process_channel_activity(struct xpc_partition *part) +xpc_process_sent_chctl_flags(struct xpc_partition *part) { unsigned long irq_flags; - u64 IPI_amo, IPI_flags; + union xpc_channel_ctl_flags chctl; struct xpc_channel *ch; int ch_number; u32 ch_flags; - IPI_amo = xpc_get_IPI_flags(part); + chctl.all_flags = xpc_get_chctl_all_flags(part); /* * Initiate channel connections for registered channels. @@ -721,14 +718,14 @@ xpc_process_channel_activity(struct xpc_partition *part) ch = &part->channels[ch_number]; /* - * Process any open or close related IPI flags, and then deal + * Process any open or close related chctl flags, and then deal * with connecting or disconnecting the channel as required. */ - IPI_flags = XPC_GET_IPI_FLAGS(IPI_amo, ch_number); - - if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_flags)) - xpc_process_openclose_IPI(part, ch_number, IPI_flags); + if (chctl.flags[ch_number] & XPC_OPENCLOSE_CHCTL_FLAGS) { + xpc_process_openclose_chctl_flags(part, ch_number, + chctl.flags[ch_number]); + } ch_flags = ch->flags; /* need an atomic snapshot of flags */ @@ -755,13 +752,13 @@ xpc_process_channel_activity(struct xpc_partition *part) } /* - * Process any message related IPI flags, this may involve the - * activation of kthreads to deliver any pending messages sent - * from the other partition. + * Process any message related chctl flags, this may involve + * the activation of kthreads to deliver any pending messages + * sent from the other partition. */ - if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_flags)) - xpc_process_msg_IPI(part, ch_number); + if (chctl.flags[ch_number] & XPC_MSG_CHCTL_FLAGS) + xpc_process_msg_chctl_flags(part, ch_number); } } @@ -937,7 +934,7 @@ xpc_disconnect_channel(const int line, struct xpc_channel *ch, XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY | XPC_C_CONNECTING | XPC_C_CONNECTED); - xpc_send_channel_closerequest(ch, irq_flags); + xpc_send_chctl_closerequest(ch, irq_flags); if (channel_was_connected) ch->flags |= XPC_C_WASCONNECTED; diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 563aaf4a2ff..43f5b686ecf 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -25,18 +25,18 @@ * * Caveats: * - * . We currently have no way to determine which nasid an IPI came - * from. Thus, >>> xpc_IPI_send() does a remote AMO write followed by - * an IPI. The AMO indicates where data is to be pulled from, so - * after the IPI arrives, the remote partition checks the AMO word. - * The IPI can actually arrive before the AMO however, so other code - * must periodically check for this case. Also, remote AMO operations - * do not reliably time out. Thus we do a remote PIO read solely to - * know whether the remote partition is down and whether we should - * stop sending IPIs to it. This remote PIO read operation is set up - * in a special nofault region so SAL knows to ignore (and cleanup) - * any errors due to the remote AMO write, PIO read, and/or PIO - * write operations. + * . Currently on sn2, we have no way to determine which nasid an IRQ + * came from. Thus, xpc_send_IRQ_sn2() does a remote AMO write + * followed by an IPI. The AMO indicates where data is to be pulled + * from, so after the IPI arrives, the remote partition checks the AMO + * word. The IPI can actually arrive before the AMO however, so other + * code must periodically check for this case. Also, remote AMO + * operations do not reliably time out. Thus we do a remote PIO read + * solely to know whether the remote partition is down and whether we + * should stop sending IPIs to it. This remote PIO read operation is + * set up in a special nofault region so SAL knows to ignore (and + * cleanup) any errors due to the remote AMO write, PIO read, and/or + * PIO write operations. * * If/when new hardware solves this IPI problem, we should abandon * the current approach. @@ -185,8 +185,8 @@ void (*xpc_check_remote_hb) (void); enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part); void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch); -u64 (*xpc_get_IPI_flags) (struct xpc_partition *part); -void (*xpc_process_msg_IPI) (struct xpc_partition *part, int ch_number); +u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part); +void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number); int (*xpc_n_of_deliverable_msgs) (struct xpc_channel *ch); struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *ch); @@ -206,14 +206,14 @@ int (*xpc_any_partition_engaged) (void); void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part); void (*xpc_assume_partition_disengaged) (short partid); -void (*xpc_send_channel_closerequest) (struct xpc_channel *ch, - unsigned long *irq_flags); -void (*xpc_send_channel_closereply) (struct xpc_channel *ch, +void (*xpc_send_chctl_closerequest) (struct xpc_channel *ch, unsigned long *irq_flags); -void (*xpc_send_channel_openrequest) (struct xpc_channel *ch, - unsigned long *irq_flags); -void (*xpc_send_channel_openreply) (struct xpc_channel *ch, +void (*xpc_send_chctl_closereply) (struct xpc_channel *ch, + unsigned long *irq_flags); +void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch, unsigned long *irq_flags); +void (*xpc_send_chctl_openreply) (struct xpc_channel *ch, + unsigned long *irq_flags); enum xp_retval (*xpc_send_msg) (struct xpc_channel *ch, u32 flags, void *payload, u16 payload_size, u8 notify_type, @@ -302,7 +302,7 @@ xpc_hb_checker(void *ignore) /* * We need to periodically recheck to ensure no - * IPI/AMO pairs have been missed. That check + * IRQ/AMO pairs have been missed. That check * must always reset xpc_hb_check_timeout. */ force_IRQ = 1; @@ -378,7 +378,7 @@ xpc_channel_mgr(struct xpc_partition *part) atomic_read(&part->nchannels_active) > 0 || !xpc_partition_disengaged(part)) { - xpc_process_channel_activity(part); + xpc_process_sent_chctl_flags(part); /* * Wait until we've been requested to activate kthreads or @@ -396,7 +396,7 @@ xpc_channel_mgr(struct xpc_partition *part) atomic_dec(&part->channel_mgr_requests); (void)wait_event_interruptible(part->channel_mgr_wq, (atomic_read(&part->channel_mgr_requests) > 0 || - part->local_IPI_amo != 0 || + part->chctl.all_flags != 0 || (part->act_state == XPC_P_DEACTIVATING && atomic_read(&part->nchannels_active) == 0 && xpc_partition_disengaged(part)))); @@ -753,16 +753,15 @@ xpc_disconnect_wait(int ch_number) DBUG_ON(!(ch->flags & XPC_C_DISCONNECTED)); wakeup_channel_mgr = 0; - if (ch->delayed_IPI_flags) { + if (ch->delayed_chctl_flags) { if (part->act_state != XPC_P_DEACTIVATING) { - spin_lock(&part->IPI_lock); - XPC_SET_IPI_FLAGS(part->local_IPI_amo, - ch->number, - ch->delayed_IPI_flags); - spin_unlock(&part->IPI_lock); + spin_lock(&part->chctl_lock); + part->chctl.flags[ch->number] |= + ch->delayed_chctl_flags; + spin_unlock(&part->chctl_lock); wakeup_channel_mgr = 1; } - ch->delayed_IPI_flags = 0; + ch->delayed_chctl_flags = 0; } ch->flags &= ~XPC_C_WDISCONNECT; diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 69d74bd5689..0fef7d86a5a 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -104,20 +104,20 @@ xpc_disallow_IPI_ops_sn2(void) } /* - * The following set of macros and functions are used for the sending and - * receiving of IPIs (also known as IRQs). There are two flavors of IPIs, - * one that is associated with partition activity (SGI_XPC_ACTIVATE) and - * the other that is associated with channel activity (SGI_XPC_NOTIFY). + * The following set of functions are used for the sending and receiving of + * IRQs (also known as IPIs). There are two flavors of IRQs, one that is + * associated with partition activity (SGI_XPC_ACTIVATE) and the other that + * is associated with channel activity (SGI_XPC_NOTIFY). */ static u64 -xpc_IPI_receive_sn2(AMO_t *amo) +xpc_receive_IRQ_amo_sn2(AMO_t *amo) { return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR); } static enum xp_retval -xpc_IPI_send_sn2(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector) +xpc_send_IRQ_sn2(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector) { int ret = 0; unsigned long irq_flags; @@ -131,7 +131,7 @@ xpc_IPI_send_sn2(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector) * We must always use the nofault function regardless of whether we * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. + * keep sending IRQs and AMOs to it until the heartbeat times out. */ ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable), xp_nofault_PIOR_target)); @@ -142,16 +142,16 @@ xpc_IPI_send_sn2(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector) } static AMO_t * -xpc_IPI_init_sn2(int index) +xpc_init_IRQ_amo_sn2(int index) { AMO_t *amo = xpc_vars->amos_page + index; - (void)xpc_IPI_receive_sn2(amo); /* clear AMO variable */ + (void)xpc_receive_IRQ_amo_sn2(amo); /* clear AMO variable */ return amo; } /* - * IPIs associated with SGI_XPC_ACTIVATE IRQ. + * Functions associated with SGI_XPC_ACTIVATE IRQ. */ /* @@ -166,23 +166,23 @@ xpc_handle_activate_IRQ_sn2(int irq, void *dev_id) } /* - * Flag the appropriate AMO variable and send an IPI to the specified node. + * Flag the appropriate AMO variable and send an IRQ to the specified node. */ static void -xpc_activate_IRQ_send_sn2(u64 amos_page_pa, int from_nasid, int to_nasid, - int to_phys_cpuid) +xpc_send_activate_IRQ_sn2(u64 amos_page_pa, int from_nasid, int to_nasid, + int to_phys_cpuid) { int w_index = XPC_NASID_W_INDEX(from_nasid); int b_index = XPC_NASID_B_INDEX(from_nasid); AMO_t *amos = (AMO_t *)__va(amos_page_pa + (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t))); - (void)xpc_IPI_send_sn2(&amos[w_index], (1UL << b_index), to_nasid, + (void)xpc_send_IRQ_sn2(&amos[w_index], (1UL << b_index), to_nasid, to_phys_cpuid, SGI_XPC_ACTIVATE); } static void -xpc_activate_IRQ_send_local_sn2(int from_nasid) +xpc_send_local_activate_IRQ_sn2(int from_nasid) { int w_index = XPC_NASID_W_INDEX(from_nasid); int b_index = XPC_NASID_B_INDEX(from_nasid); @@ -197,29 +197,29 @@ xpc_activate_IRQ_send_local_sn2(int from_nasid) } /* - * IPIs associated with SGI_XPC_NOTIFY IRQ. + * Functions associated with SGI_XPC_NOTIFY IRQ. */ /* - * Check to see if there is any channel activity to/from the specified - * partition. + * Check to see if any chctl flags were sent from the specified partition. */ static void -xpc_check_for_channel_activity_sn2(struct xpc_partition *part) +xpc_check_for_sent_chctl_flags_sn2(struct xpc_partition *part) { - u64 IPI_amo; + union xpc_channel_ctl_flags chctl; unsigned long irq_flags; - IPI_amo = xpc_IPI_receive_sn2(part->sn.sn2.local_IPI_amo_va); - if (IPI_amo == 0) + chctl.all_flags = xpc_receive_IRQ_amo_sn2(part->sn.sn2. + local_chctl_amo_va); + if (chctl.all_flags == 0) return; - spin_lock_irqsave(&part->IPI_lock, irq_flags); - part->local_IPI_amo |= IPI_amo; - spin_unlock_irqrestore(&part->IPI_lock, irq_flags); + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.all_flags |= chctl.all_flags; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); - dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n", - XPC_PARTID(part), IPI_amo); + dev_dbg(xpc_chan, "received notify IRQ from partid=%d, chctl.all_flags=" + "0x%lx\n", XPC_PARTID(part), chctl.all_flags); xpc_wakeup_channel_mgr(part); } @@ -228,17 +228,17 @@ xpc_check_for_channel_activity_sn2(struct xpc_partition *part) * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more * than one partition, we use an AMO_t structure per partition to indicate - * whether a partition has sent an IPI or not. If it has, then wake up the + * whether a partition has sent an IRQ or not. If it has, then wake up the * associated kthread to handle it. * - * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IPIs sent by XPC + * All SGI_XPC_NOTIFY IRQs received by XPC are the result of IRQs sent by XPC * running on other partitions. * * Noteworthy Arguments: * * irq - Interrupt ReQuest number. NOT USED. * - * dev_id - partid of IPI's potential sender. + * dev_id - partid of IRQ's potential sender. */ static irqreturn_t xpc_handle_notify_IRQ_sn2(int irq, void *dev_id) @@ -249,7 +249,7 @@ xpc_handle_notify_IRQ_sn2(int irq, void *dev_id) DBUG_ON(partid < 0 || partid >= xp_max_npartitions); if (xpc_part_ref(part)) { - xpc_check_for_channel_activity_sn2(part); + xpc_check_for_sent_chctl_flags_sn2(part); xpc_part_deref(part); } @@ -257,45 +257,47 @@ xpc_handle_notify_IRQ_sn2(int irq, void *dev_id) } /* - * Check to see if xpc_handle_notify_IRQ_sn2() dropped any IPIs on the floor - * because the write to their associated IPI amo completed after the IRQ/IPI + * Check to see if xpc_handle_notify_IRQ_sn2() dropped any IRQs on the floor + * because the write to their associated amo variable completed after the IRQ * was received. */ static void -xpc_dropped_notify_IRQ_check_sn2(struct xpc_partition *part) +xpc_check_for_dropped_notify_IRQ_sn2(struct xpc_partition *part) { struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; if (xpc_part_ref(part)) { - xpc_check_for_channel_activity_sn2(part); + xpc_check_for_sent_chctl_flags_sn2(part); part_sn2->dropped_notify_IRQ_timer.expires = jiffies + - XPC_P_DROPPED_IPI_WAIT_INTERVAL; + XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL; add_timer(&part_sn2->dropped_notify_IRQ_timer); xpc_part_deref(part); } } /* - * Send an IPI to the remote partition that is associated with the + * Send a notify IRQ to the remote partition that is associated with the * specified channel. */ static void -xpc_notify_IRQ_send_sn2(struct xpc_channel *ch, u8 ipi_flag, - char *ipi_flag_string, unsigned long *irq_flags) +xpc_send_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag, + char *chctl_flag_string, unsigned long *irq_flags) { struct xpc_partition *part = &xpc_partitions[ch->partid]; struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + union xpc_channel_ctl_flags chctl = { 0 }; enum xp_retval ret; if (likely(part->act_state != XPC_P_DEACTIVATING)) { - ret = xpc_IPI_send_sn2(part_sn2->remote_IPI_amo_va, - (u64)ipi_flag << (ch->number * 8), - part_sn2->remote_IPI_nasid, - part_sn2->remote_IPI_phys_cpuid, + chctl.flags[ch->number] = chctl_flag; + ret = xpc_send_IRQ_sn2(part_sn2->remote_chctl_amo_va, + chctl.all_flags, + part_sn2->notify_IRQ_nasid, + part_sn2->notify_IRQ_phys_cpuid, SGI_XPC_NOTIFY); dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n", - ipi_flag_string, ch->partid, ch->number, ret); + chctl_flag_string, ch->partid, ch->number, ret); if (unlikely(ret != xpSuccess)) { if (irq_flags != NULL) spin_unlock_irqrestore(&ch->lock, *irq_flags); @@ -306,78 +308,78 @@ xpc_notify_IRQ_send_sn2(struct xpc_channel *ch, u8 ipi_flag, } } -#define XPC_NOTIFY_IRQ_SEND_SN2(_ch, _ipi_f, _irq_f) \ - xpc_notify_IRQ_send_sn2(_ch, _ipi_f, #_ipi_f, _irq_f) +#define XPC_SEND_NOTIFY_IRQ_SN2(_ch, _ipi_f, _irq_f) \ + xpc_send_notify_IRQ_sn2(_ch, _ipi_f, #_ipi_f, _irq_f) /* * Make it look like the remote partition, which is associated with the - * specified channel, sent us an IPI. This faked IPI will be handled - * by xpc_dropped_notify_IRQ_check_sn2(). + * specified channel, sent us a notify IRQ. This faked IRQ will be handled + * by xpc_check_for_dropped_notify_IRQ_sn2(). */ static void -xpc_notify_IRQ_send_local_sn2(struct xpc_channel *ch, u8 ipi_flag, - char *ipi_flag_string) +xpc_send_local_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag, + char *chctl_flag_string) { struct xpc_partition *part = &xpc_partitions[ch->partid]; + union xpc_channel_ctl_flags chctl = { 0 }; - FETCHOP_STORE_OP(TO_AMO((u64)&part->sn.sn2.local_IPI_amo_va->variable), - FETCHOP_OR, ((u64)ipi_flag << (ch->number * 8))); + chctl.flags[ch->number] = chctl_flag; + FETCHOP_STORE_OP(TO_AMO((u64)&part->sn.sn2.local_chctl_amo_va-> + variable), FETCHOP_OR, chctl.all_flags); dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n", - ipi_flag_string, ch->partid, ch->number); + chctl_flag_string, ch->partid, ch->number); } -#define XPC_NOTIFY_IRQ_SEND_LOCAL_SN2(_ch, _ipi_f) \ - xpc_notify_IRQ_send_local_sn2(_ch, _ipi_f, #_ipi_f) +#define XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(_ch, _ipi_f) \ + xpc_send_local_notify_IRQ_sn2(_ch, _ipi_f, #_ipi_f) static void -xpc_send_channel_closerequest_sn2(struct xpc_channel *ch, - unsigned long *irq_flags) +xpc_send_chctl_closerequest_sn2(struct xpc_channel *ch, + unsigned long *irq_flags) { struct xpc_openclose_args *args = ch->local_openclose_args; args->reason = ch->reason; - XPC_NOTIFY_IRQ_SEND_SN2(ch, XPC_IPI_CLOSEREQUEST, irq_flags); + XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREQUEST, irq_flags); } static void -xpc_send_channel_closereply_sn2(struct xpc_channel *ch, - unsigned long *irq_flags) +xpc_send_chctl_closereply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) { - XPC_NOTIFY_IRQ_SEND_SN2(ch, XPC_IPI_CLOSEREPLY, irq_flags); + XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREPLY, irq_flags); } static void -xpc_send_channel_openrequest_sn2(struct xpc_channel *ch, - unsigned long *irq_flags) +xpc_send_chctl_openrequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags) { struct xpc_openclose_args *args = ch->local_openclose_args; args->msg_size = ch->msg_size; args->local_nentries = ch->local_nentries; - XPC_NOTIFY_IRQ_SEND_SN2(ch, XPC_IPI_OPENREQUEST, irq_flags); + XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREQUEST, irq_flags); } static void -xpc_send_channel_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) +xpc_send_chctl_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) { struct xpc_openclose_args *args = ch->local_openclose_args; args->remote_nentries = ch->remote_nentries; args->local_nentries = ch->local_nentries; args->local_msgqueue_pa = __pa(ch->local_msgqueue); - XPC_NOTIFY_IRQ_SEND_SN2(ch, XPC_IPI_OPENREPLY, irq_flags); + XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREPLY, irq_flags); } static void -xpc_send_channel_msgrequest_sn2(struct xpc_channel *ch) +xpc_send_chctl_msgrequest_sn2(struct xpc_channel *ch) { - XPC_NOTIFY_IRQ_SEND_SN2(ch, XPC_IPI_MSGREQUEST, NULL); + XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST, NULL); } static void -xpc_send_channel_local_msgrequest_sn2(struct xpc_channel *ch) +xpc_send_chctl_local_msgrequest_sn2(struct xpc_channel *ch) { - XPC_NOTIFY_IRQ_SEND_LOCAL_SN2(ch, XPC_IPI_MSGREQUEST); + XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST); } /* @@ -402,7 +404,7 @@ xpc_indicate_partition_engaged_sn2(struct xpc_partition *part) * We must always use the nofault function regardless of whether we * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. + * keep sending IRQs and AMOs to it until the heartbeat times out. */ (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> variable), @@ -429,7 +431,7 @@ xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part) * We must always use the nofault function regardless of whether we * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. + * keep sending IRQs and AMOs to it until the heartbeat times out. */ (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> variable), @@ -441,7 +443,7 @@ xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part) * Send activate IRQ to get other side to see that we've cleared our * bit in their engaged partitions AMO. */ - xpc_activate_IRQ_send_sn2(part_sn2->remote_amos_page_pa, + xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa, cnodeid_to_nasid(0), part_sn2->activate_IRQ_nasid, part_sn2->activate_IRQ_phys_cpuid); @@ -595,11 +597,11 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) /* initialize the activate IRQ related AMO variables */ for (i = 0; i < xp_nasid_mask_words; i++) - (void)xpc_IPI_init_sn2(XPC_ACTIVATE_IRQ_AMOS + i); + (void)xpc_init_IRQ_amo_sn2(XPC_ACTIVATE_IRQ_AMOS + i); /* initialize the engaged remote partitions related AMO variables */ - (void)xpc_IPI_init_sn2(XPC_ENGAGED_PARTITIONS_AMO); - (void)xpc_IPI_init_sn2(XPC_DEACTIVATE_REQUEST_AMO); + (void)xpc_init_IRQ_amo_sn2(XPC_ENGAGED_PARTITIONS_AMO); + (void)xpc_init_IRQ_amo_sn2(XPC_DEACTIVATE_REQUEST_AMO); return xpSuccess; } @@ -729,13 +731,13 @@ static void xpc_request_partition_activation_sn2(struct xpc_rsvd_page *remote_rp, u64 remote_rp_pa, int nasid) { - xpc_activate_IRQ_send_local_sn2(nasid); + xpc_send_local_activate_IRQ_sn2(nasid); } static void xpc_request_partition_reactivation_sn2(struct xpc_partition *part) { - xpc_activate_IRQ_send_local_sn2(part->sn.sn2.activate_IRQ_nasid); + xpc_send_local_activate_IRQ_sn2(part->sn.sn2.activate_IRQ_nasid); } static void @@ -755,7 +757,7 @@ xpc_request_partition_deactivation_sn2(struct xpc_partition *part) * We must always use the nofault function regardless of whether we * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. + * keep sending IRQs and AMOs to it until the heartbeat times out. */ (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> variable), @@ -767,7 +769,7 @@ xpc_request_partition_deactivation_sn2(struct xpc_partition *part) * Send activate IRQ to get other side to see that we've set our * bit in their deactivate request AMO. */ - xpc_activate_IRQ_send_sn2(part_sn2->remote_amos_page_pa, + xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa, cnodeid_to_nasid(0), part_sn2->activate_IRQ_nasid, part_sn2->activate_IRQ_phys_cpuid); @@ -789,7 +791,7 @@ xpc_cancel_partition_deactivation_request_sn2(struct xpc_partition *part) * We must always use the nofault function regardless of whether we * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we * didn't, we'd never know that the other partition is down and would - * keep sending IPIs and AMOs to it until the heartbeat times out. + * keep sending IRQs and AMOs to it until the heartbeat times out. */ (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> variable), @@ -861,11 +863,11 @@ xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version, } /* - * Prior code has determined the nasid which generated an IPI. Inspect - * that nasid to determine if its partition needs to be activated or - * deactivated. + * Prior code has determined the nasid which generated a activate IRQ. + * Inspect that nasid to determine if its partition needs to be activated + * or deactivated. * - * A partition is consider "awaiting activation" if our partition + * A partition is considered "awaiting activation" if our partition * flags indicate it is not active and it has a heartbeat. A * partition is considered "awaiting deactivation" if our partition * flags indicate it is active but it has no heartbeat or it is not @@ -997,7 +999,7 @@ xpc_identify_activate_IRQ_sender_sn2(void) if (xpc_exiting) break; - nasid_mask = xpc_IPI_receive_sn2(&act_amos[word]); + nasid_mask = xpc_receive_IRQ_amo_sn2(&act_amos[word]); if (nasid_mask == 0) { /* no IRQs from nasids in this variable */ continue; @@ -1117,20 +1119,20 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) part_sn2->remote_openclose_args_pa = 0; - part_sn2->local_IPI_amo_va = xpc_IPI_init_sn2(partid); - part->local_IPI_amo = 0; - spin_lock_init(&part->IPI_lock); + part_sn2->local_chctl_amo_va = xpc_init_IRQ_amo_sn2(partid); + part->chctl.all_flags = 0; + spin_lock_init(&part->chctl_lock); - part_sn2->remote_IPI_nasid = 0; - part_sn2->remote_IPI_phys_cpuid = 0; - part_sn2->remote_IPI_amo_va = NULL; + part_sn2->notify_IRQ_nasid = 0; + part_sn2->notify_IRQ_phys_cpuid = 0; + part_sn2->remote_chctl_amo_va = NULL; atomic_set(&part->channel_mgr_requests, 1); init_waitqueue_head(&part->channel_mgr_wq); - sprintf(part_sn2->IPI_owner, "xpc%02d", partid); + sprintf(part_sn2->notify_IRQ_owner, "xpc%02d", partid); ret = request_irq(SGI_XPC_NOTIFY, xpc_handle_notify_IRQ_sn2, - IRQF_SHARED, part_sn2->IPI_owner, + IRQF_SHARED, part_sn2->notify_IRQ_owner, (void *)(u64)partid); if (ret != 0) { dev_err(xpc_chan, "can't register NOTIFY IRQ handler, " @@ -1139,13 +1141,13 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) goto out_5; } - /* Setup a timer to check for dropped IPIs */ + /* Setup a timer to check for dropped notify IRQs */ timer = &part_sn2->dropped_notify_IRQ_timer; init_timer(timer); timer->function = - (void (*)(unsigned long))xpc_dropped_notify_IRQ_check_sn2; + (void (*)(unsigned long))xpc_check_for_dropped_notify_IRQ_sn2; timer->data = (unsigned long)part; - timer->expires = jiffies + XPC_P_DROPPED_IPI_WAIT_INTERVAL; + timer->expires = jiffies + XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL; add_timer(timer); part->nchannels = XPC_MAX_NCHANNELS; @@ -1196,10 +1198,10 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) xpc_vars_part[partid].GPs_pa = __pa(part_sn2->local_GPs); xpc_vars_part[partid].openclose_args_pa = __pa(part->local_openclose_args); - xpc_vars_part[partid].IPI_amo_pa = __pa(part_sn2->local_IPI_amo_va); + xpc_vars_part[partid].chctl_amo_pa = __pa(part_sn2->local_chctl_amo_va); cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */ - xpc_vars_part[partid].IPI_nasid = cpuid_to_nasid(cpuid); - xpc_vars_part[partid].IPI_phys_cpuid = cpu_physical_id(cpuid); + xpc_vars_part[partid].notify_IRQ_nasid = cpuid_to_nasid(cpuid); + xpc_vars_part[partid].notify_IRQ_phys_cpuid = cpu_physical_id(cpuid); xpc_vars_part[partid].nchannels = part->nchannels; xpc_vars_part[partid].magic = XPC_VP_MAGIC1; @@ -1239,7 +1241,7 @@ xpc_teardown_infrastructure_sn2(struct xpc_partition *part) * processes by marking it as no longer setup. Then we make it * inaccessible to remote processes by clearing the XPC per partition * specific variable's magic # (which indicates that these variables - * are no longer valid) and by ignoring all XPC notify IPIs sent to + * are no longer valid) and by ignoring all XPC notify IRQs sent to * this partition. */ @@ -1275,7 +1277,7 @@ xpc_teardown_infrastructure_sn2(struct xpc_partition *part) part_sn2->local_GPs = NULL; kfree(part->channels); part->channels = NULL; - part_sn2->local_IPI_amo_va = NULL; + part_sn2->local_chctl_amo_va = NULL; } /* @@ -1370,7 +1372,7 @@ xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) if (pulled_entry->GPs_pa == 0 || pulled_entry->openclose_args_pa == 0 || - pulled_entry->IPI_amo_pa == 0) { + pulled_entry->chctl_amo_pa == 0) { dev_err(xpc_chan, "partition %d's XPC vars_part for " "partition %d are not valid\n", partid, @@ -1383,10 +1385,11 @@ xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) part_sn2->remote_GPs_pa = pulled_entry->GPs_pa; part_sn2->remote_openclose_args_pa = pulled_entry->openclose_args_pa; - part_sn2->remote_IPI_amo_va = - (AMO_t *)__va(pulled_entry->IPI_amo_pa); - part_sn2->remote_IPI_nasid = pulled_entry->IPI_nasid; - part_sn2->remote_IPI_phys_cpuid = pulled_entry->IPI_phys_cpuid; + part_sn2->remote_chctl_amo_va = + (AMO_t *)__va(pulled_entry->chctl_amo_pa); + part_sn2->notify_IRQ_nasid = pulled_entry->notify_IRQ_nasid; + part_sn2->notify_IRQ_phys_cpuid = + pulled_entry->notify_IRQ_phys_cpuid; if (part->nchannels > pulled_entry->nchannels) part->nchannels = pulled_entry->nchannels; @@ -1437,7 +1440,7 @@ xpc_make_first_contact_sn2(struct xpc_partition *part) * Send activate IRQ to get other side to activate if they've not * already begun to do so. */ - xpc_activate_IRQ_send_sn2(part_sn2->remote_amos_page_pa, + xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa, cnodeid_to_nasid(0), part_sn2->activate_IRQ_nasid, part_sn2->activate_IRQ_phys_cpuid); @@ -1462,28 +1465,28 @@ xpc_make_first_contact_sn2(struct xpc_partition *part) } /* - * Get the IPI flags and pull the openclose args and/or remote GPs as needed. + * Get the chctl flags and pull the openclose args and/or remote GPs as needed. */ static u64 -xpc_get_IPI_flags_sn2(struct xpc_partition *part) +xpc_get_chctl_all_flags_sn2(struct xpc_partition *part) { struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; unsigned long irq_flags; - u64 IPI_amo; + union xpc_channel_ctl_flags chctl; enum xp_retval ret; /* - * See if there are any IPI flags to be handled. + * See if there are any chctl flags to be handled. */ - spin_lock_irqsave(&part->IPI_lock, irq_flags); - IPI_amo = part->local_IPI_amo; - if (IPI_amo != 0) - part->local_IPI_amo = 0; + spin_lock_irqsave(&part->chctl_lock, irq_flags); + chctl = part->chctl; + if (chctl.all_flags != 0) + part->chctl.all_flags = 0; - spin_unlock_irqrestore(&part->IPI_lock, irq_flags); + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); - if (XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(IPI_amo)) { + if (xpc_any_openclose_chctl_flags_set(&chctl)) { ret = xpc_pull_remote_cachelines_sn2(part, part-> remote_openclose_args, (void *)part_sn2-> @@ -1496,12 +1499,12 @@ xpc_get_IPI_flags_sn2(struct xpc_partition *part) "partition %d, ret=%d\n", XPC_PARTID(part), ret); - /* don't bother processing IPIs anymore */ - IPI_amo = 0; + /* don't bother processing chctl flags anymore */ + chctl.all_flags = 0; } } - if (XPC_ANY_MSG_IPI_FLAGS_SET(IPI_amo)) { + if (xpc_any_msg_chctl_flags_set(&chctl)) { ret = xpc_pull_remote_cachelines_sn2(part, part_sn2->remote_GPs, (void *)part_sn2->remote_GPs_pa, XPC_GP_SIZE); @@ -1511,12 +1514,12 @@ xpc_get_IPI_flags_sn2(struct xpc_partition *part) dev_dbg(xpc_chan, "failed to pull GPs from partition " "%d, ret=%d\n", XPC_PARTID(part), ret); - /* don't bother processing IPIs anymore */ - IPI_amo = 0; + /* don't bother processing chctl flags anymore */ + chctl.all_flags = 0; } } - return IPI_amo; + return chctl.all_flags; } /* @@ -1610,7 +1613,7 @@ xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch) } static void -xpc_process_msg_IPI_sn2(struct xpc_partition *part, int ch_number) +xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number) { struct xpc_channel *ch = &part->channels[ch_number]; struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; @@ -1827,8 +1830,8 @@ xpc_get_deliverable_msg_sn2(struct xpc_channel *ch) /* * Now we actually send the messages that are ready to be sent by advancing - * the local message queue's Put value and then send an IPI to the recipient - * partition. + * the local message queue's Put value and then send a chctl msgrequest to the + * recipient partition. */ static void xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) @@ -1836,7 +1839,7 @@ xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; struct xpc_msg *msg; s64 put = initial_put + 1; - int send_IPI = 0; + int send_msgrequest = 0; while (1) { @@ -1871,7 +1874,7 @@ xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) dev_dbg(xpc_chan, "local_GP->put changed to %ld, partid=%d, " "channel=%d\n", put, ch->partid, ch->number); - send_IPI = 1; + send_msgrequest = 1; /* * We need to ensure that the message referenced by @@ -1881,8 +1884,8 @@ xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) initial_put = put; } - if (send_IPI) - xpc_send_channel_msgrequest_sn2(ch); + if (send_msgrequest) + xpc_send_chctl_msgrequest_sn2(ch); } /* @@ -1929,13 +1932,13 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, * There aren't any available msg entries at this time. * * In waiting for a message entry to become available, - * we set a timeout in case the other side is not - * sending completion IPIs. This lets us fake an IPI - * that will cause the IPI handler to fetch the latest - * GP values as if an IPI was sent by the other side. + * we set a timeout in case the other side is not sending + * completion interrupts. This lets us fake a notify IRQ + * that will cause the notify IRQ handler to fetch the latest + * GP values as if an interrupt was sent by the other side. */ if (ret == xpTimeout) - xpc_send_channel_local_msgrequest_sn2(ch); + xpc_send_chctl_local_msgrequest_sn2(ch); if (flags & XPC_NOWAIT) return xpNoWait; @@ -1962,8 +1965,8 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, /* * Common code that does the actual sending of the message by advancing the - * local message queue's Put value and sends an IPI to the partition the - * message is being sent to. + * local message queue's Put value and sends a chctl msgrequest to the + * partition the message is being sent to. */ static enum xp_retval xpc_send_msg_sn2(struct xpc_channel *ch, u32 flags, void *payload, @@ -2055,7 +2058,7 @@ out_1: /* * Now we actually acknowledge the messages that have been delivered and ack'd * by advancing the cached remote message queue's Get value and if requested - * send an IPI to the message sender's partition. + * send a chctl msgrequest to the message sender's partition. */ static void xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) @@ -2063,7 +2066,7 @@ xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; struct xpc_msg *msg; s64 get = initial_get + 1; - int send_IPI = 0; + int send_msgrequest = 0; while (1) { @@ -2099,7 +2102,7 @@ xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, " "channel=%d\n", get, ch->partid, ch->number); - send_IPI = (msg_flags & XPC_M_INTERRUPT); + send_msgrequest = (msg_flags & XPC_M_INTERRUPT); /* * We need to ensure that the message referenced by @@ -2109,8 +2112,8 @@ xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) initial_get = get; } - if (send_IPI) - xpc_send_channel_msgrequest_sn2(ch); + if (send_msgrequest) + xpc_send_chctl_msgrequest_sn2(ch); } static void @@ -2168,9 +2171,9 @@ xpc_init_sn2(void) xpc_setup_infrastructure = xpc_setup_infrastructure_sn2; xpc_teardown_infrastructure = xpc_teardown_infrastructure_sn2; xpc_make_first_contact = xpc_make_first_contact_sn2; - xpc_get_IPI_flags = xpc_get_IPI_flags_sn2; + xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2; xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2; - xpc_process_msg_IPI = xpc_process_msg_IPI_sn2; + xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2; xpc_n_of_deliverable_msgs = xpc_n_of_deliverable_msgs_sn2; xpc_get_deliverable_msg = xpc_get_deliverable_msg_sn2; @@ -2181,10 +2184,10 @@ xpc_init_sn2(void) xpc_indicate_partition_disengaged_sn2; xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2; - xpc_send_channel_closerequest = xpc_send_channel_closerequest_sn2; - xpc_send_channel_closereply = xpc_send_channel_closereply_sn2; - xpc_send_channel_openrequest = xpc_send_channel_openrequest_sn2; - xpc_send_channel_openreply = xpc_send_channel_openreply_sn2; + xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2; + xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2; + xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2; + xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2; xpc_send_msg = xpc_send_msg_sn2; xpc_received_msg = xpc_received_msg_sn2; diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index c53b229cb04..1401b0f45dc 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -26,7 +26,7 @@ static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV); static void *xpc_activate_mq; static void -xpc_IPI_send_local_activate_uv(struct xpc_partition *part) +xpc_send_local_activate_IRQ_uv(struct xpc_partition *part) { /* * >>> make our side think that the remote parition sent an activate @@ -75,13 +75,13 @@ xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp, * >>> part->sn.uv.activate_mq_gpa = remote_rp->sn.activate_mq_gpa; */ - xpc_IPI_send_local_activate_uv(part); + xpc_send_local_activate_IRQ_uv(part); } static void xpc_request_partition_reactivation_uv(struct xpc_partition *part) { - xpc_IPI_send_local_activate_uv(part); + xpc_send_local_activate_IRQ_uv(part); } /* @@ -114,7 +114,7 @@ xpc_make_first_contact_uv(struct xpc_partition *part) } static u64 -xpc_get_IPI_flags_uv(struct xpc_partition *part) +xpc_get_chctl_all_flags_uv(struct xpc_partition *part) { /* >>> this function needs fleshing out */ return 0UL; @@ -140,7 +140,7 @@ xpc_init_uv(void) xpc_setup_infrastructure = xpc_setup_infrastructure_uv; xpc_teardown_infrastructure = xpc_teardown_infrastructure_uv; xpc_make_first_contact = xpc_make_first_contact_uv; - xpc_get_IPI_flags = xpc_get_IPI_flags_uv; + xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_uv; xpc_get_deliverable_msg = xpc_get_deliverable_msg_uv; } -- GitLab From c39838ce21ca8e05857ed7f4be5d289011561905 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:11 -0700 Subject: [PATCH 0402/1024] sgi-xp: replace AMO_t typedef by struct amo Replace the AMO_t typedef by a direct reference to 'struct amo'. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xp_sn2.c | 2 +- drivers/misc/sgi-xp/xpc.h | 24 +++--- drivers/misc/sgi-xp/xpc_main.c | 16 ++-- drivers/misc/sgi-xp/xpc_sn2.c | 139 +++++++++++++++++---------------- include/asm-ia64/sn/mspec.h | 16 ++-- 5 files changed, 101 insertions(+), 96 deletions(-) diff --git a/drivers/misc/sgi-xp/xp_sn2.c b/drivers/misc/sgi-xp/xp_sn2.c index 3d553fa73f4..1fcfdebca2c 100644 --- a/drivers/misc/sgi-xp/xp_sn2.c +++ b/drivers/misc/sgi-xp/xp_sn2.c @@ -32,7 +32,7 @@ EXPORT_SYMBOL_GPL(xp_nofault_PIOR_target); * If the PIO read times out, the MCA handler will consume the error and * return to a kernel-provided instruction to indicate an error. This PIO read * exists because it is guaranteed to timeout if the destination is down - * (AMO operations do not timeout on at least some CPUs on Shubs <= v1.2, + * (amo operations do not timeout on at least some CPUs on Shubs <= v1.2, * which unfortunately we have to work around). */ static enum xp_retval diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 26a1725f68a..da2680892df 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -38,8 +38,8 @@ /* * The next macros define word or bit representations for given * C-brick nasid in either the SAL provided bit array representing - * nasids in the partition/machine or the AMO_t array used for - * inter-partition initiation communications. + * nasids in the partition/machine or the array of amo structures used + * for inter-partition initiation communications. * * For SN2 machines, C-Bricks are alway even numbered NASIDs. As * such, some space will be saved by insisting that nasid information @@ -144,8 +144,8 @@ struct xpc_vars_sn2 { int activate_IRQ_nasid; int activate_IRQ_phys_cpuid; u64 vars_part_pa; - u64 amos_page_pa; /* paddr of page of AMOs from MSPEC driver */ - AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */ + u64 amos_page_pa; /* paddr of page of amos from MSPEC driver */ + struct amo *amos_page; /* vaddr of page of amos from MSPEC driver */ }; #define XPC_V_VERSION _XPC_VERSION(3, 1) /* version 3.1 of the cross vars */ @@ -153,17 +153,17 @@ struct xpc_vars_sn2 { /* * The following pertains to ia64-sn2 only. * - * Memory for XPC's AMO variables is allocated by the MSPEC driver. These + * Memory for XPC's amo variables is allocated by the MSPEC driver. These * pages are located in the lowest granule. The lowest granule uses 4k pages * for cached references and an alternate TLB handler to never provide a * cacheable mapping for the entire region. This will prevent speculative * reading of cached copies of our lines from being issued which will cause * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 - * AMO variables (based on XP_MAX_NPARTITIONS_SN2) to identify the senders of - * NOTIFY IRQs, 128 AMO variables (based on XP_NASID_MASK_WORDS) to identify - * the senders of ACTIVATE IRQs, 1 AMO variable to identify which remote + * amo variables (based on XP_MAX_NPARTITIONS_SN2) to identify the senders of + * NOTIFY IRQs, 128 amo variables (based on XP_NASID_MASK_WORDS) to identify + * the senders of ACTIVATE IRQs, 1 amo variable to identify which remote * partitions (i.e., XPCs) consider themselves currently engaged with the - * local XPC and 1 AMO variable to request partition deactivation. + * local XPC and 1 amo variable to request partition deactivation. */ #define XPC_NOTIFY_IRQ_AMOS 0 #define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_NPARTITIONS_SN2) @@ -186,7 +186,7 @@ struct xpc_vars_part_sn2 { u64 openclose_args_pa; /* physical address of open and close args */ u64 GPs_pa; /* physical address of Get/Put values */ - u64 chctl_amo_pa; /* physical address of chctl flags' AMO_t */ + u64 chctl_amo_pa; /* physical address of chctl flags' amo */ int notify_IRQ_nasid; /* nasid of where to send notify IRQs */ int notify_IRQ_phys_cpuid; /* CPUID of where to send notify IRQs */ @@ -547,8 +547,8 @@ struct xpc_partition_sn2 { int notify_IRQ_phys_cpuid; /* CPUID of where to send notify IRQs */ char notify_IRQ_owner[8]; /* notify IRQ's owner's name */ - AMO_t *remote_chctl_amo_va; /* address of remote chctl flags' AMO_t */ - AMO_t *local_chctl_amo_va; /* address of chctl flags' AMO_t */ + struct amo *remote_chctl_amo_va; /* addr of remote chctl flags' amo */ + struct amo *local_chctl_amo_va; /* address of chctl flags' amo */ struct timer_list dropped_notify_IRQ_timer; /* dropped IRQ timer */ }; diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 43f5b686ecf..2934b447300 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -26,16 +26,16 @@ * Caveats: * * . Currently on sn2, we have no way to determine which nasid an IRQ - * came from. Thus, xpc_send_IRQ_sn2() does a remote AMO write - * followed by an IPI. The AMO indicates where data is to be pulled - * from, so after the IPI arrives, the remote partition checks the AMO - * word. The IPI can actually arrive before the AMO however, so other - * code must periodically check for this case. Also, remote AMO + * came from. Thus, xpc_send_IRQ_sn2() does a remote amo write + * followed by an IPI. The amo indicates where data is to be pulled + * from, so after the IPI arrives, the remote partition checks the amo + * word. The IPI can actually arrive before the amo however, so other + * code must periodically check for this case. Also, remote amo * operations do not reliably time out. Thus we do a remote PIO read * solely to know whether the remote partition is down and whether we * should stop sending IPIs to it. This remote PIO read operation is * set up in a special nofault region so SAL knows to ignore (and - * cleanup) any errors due to the remote AMO write, PIO read, and/or + * cleanup) any errors due to the remote amo write, PIO read, and/or * PIO write operations. * * If/when new hardware solves this IPI problem, we should abandon @@ -302,7 +302,7 @@ xpc_hb_checker(void *ignore) /* * We need to periodically recheck to ensure no - * IRQ/AMO pairs have been missed. That check + * IRQ/amo pairs have been missed. That check * must always reset xpc_hb_check_timeout. */ force_IRQ = 1; @@ -1034,7 +1034,7 @@ xpc_init(void) if (is_shub()) { /* * The ia64-sn2 architecture supports at most 64 partitions. - * And the inability to unregister remote AMOs restricts us + * And the inability to unregister remote amos restricts us * further to only support exactly 64 partitions on this * architecture, no less. */ diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 0fef7d86a5a..01dd40ec2a8 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -111,13 +111,14 @@ xpc_disallow_IPI_ops_sn2(void) */ static u64 -xpc_receive_IRQ_amo_sn2(AMO_t *amo) +xpc_receive_IRQ_amo_sn2(struct amo *amo) { return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR); } static enum xp_retval -xpc_send_IRQ_sn2(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector) +xpc_send_IRQ_sn2(struct amo *amo, u64 flag, int nasid, int phys_cpuid, + int vector) { int ret = 0; unsigned long irq_flags; @@ -131,7 +132,7 @@ xpc_send_IRQ_sn2(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector) * We must always use the nofault function regardless of whether we * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we * didn't, we'd never know that the other partition is down and would - * keep sending IRQs and AMOs to it until the heartbeat times out. + * keep sending IRQs and amos to it until the heartbeat times out. */ ret = xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo->variable), xp_nofault_PIOR_target)); @@ -141,12 +142,12 @@ xpc_send_IRQ_sn2(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector) return ((ret == 0) ? xpSuccess : xpPioReadError); } -static AMO_t * +static struct amo * xpc_init_IRQ_amo_sn2(int index) { - AMO_t *amo = xpc_vars->amos_page + index; + struct amo *amo = xpc_vars->amos_page + index; - (void)xpc_receive_IRQ_amo_sn2(amo); /* clear AMO variable */ + (void)xpc_receive_IRQ_amo_sn2(amo); /* clear amo variable */ return amo; } @@ -166,7 +167,7 @@ xpc_handle_activate_IRQ_sn2(int irq, void *dev_id) } /* - * Flag the appropriate AMO variable and send an IRQ to the specified node. + * Flag the appropriate amo variable and send an IRQ to the specified node. */ static void xpc_send_activate_IRQ_sn2(u64 amos_page_pa, int from_nasid, int to_nasid, @@ -174,8 +175,9 @@ xpc_send_activate_IRQ_sn2(u64 amos_page_pa, int from_nasid, int to_nasid, { int w_index = XPC_NASID_W_INDEX(from_nasid); int b_index = XPC_NASID_B_INDEX(from_nasid); - AMO_t *amos = (AMO_t *)__va(amos_page_pa + - (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t))); + struct amo *amos = (struct amo *)__va(amos_page_pa + + (XPC_ACTIVATE_IRQ_AMOS * + sizeof(struct amo))); (void)xpc_send_IRQ_sn2(&amos[w_index], (1UL << b_index), to_nasid, to_phys_cpuid, SGI_XPC_ACTIVATE); @@ -186,8 +188,9 @@ xpc_send_local_activate_IRQ_sn2(int from_nasid) { int w_index = XPC_NASID_W_INDEX(from_nasid); int b_index = XPC_NASID_B_INDEX(from_nasid); - AMO_t *amos = (AMO_t *)__va(xpc_vars->amos_page_pa + - (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t))); + struct amo *amos = (struct amo *)__va(xpc_vars->amos_page_pa + + (XPC_ACTIVATE_IRQ_AMOS * + sizeof(struct amo))); /* fake the sending and receipt of an activate IRQ from remote nasid */ FETCHOP_STORE_OP(TO_AMO((u64)&amos[w_index].variable), FETCHOP_OR, @@ -227,7 +230,7 @@ xpc_check_for_sent_chctl_flags_sn2(struct xpc_partition *part) /* * Handle the receipt of a SGI_XPC_NOTIFY IRQ by seeing whether the specified * partition actually sent it. Since SGI_XPC_NOTIFY IRQs may be shared by more - * than one partition, we use an AMO_t structure per partition to indicate + * than one partition, we use an amo structure per partition to indicate * whether a partition has sent an IRQ or not. If it has, then wake up the * associated kthread to handle it. * @@ -391,20 +394,20 @@ static void xpc_indicate_partition_engaged_sn2(struct xpc_partition *part) { unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part->sn.sn2.remote_amos_page_pa + - (XPC_ENGAGED_PARTITIONS_AMO * - sizeof(AMO_t))); + struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa + + (XPC_ENGAGED_PARTITIONS_AMO * + sizeof(struct amo))); local_irq_save(irq_flags); - /* set bit corresponding to our partid in remote partition's AMO */ + /* set bit corresponding to our partid in remote partition's amo */ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, (1UL << sn_partition_id)); /* * We must always use the nofault function regardless of whether we * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we * didn't, we'd never know that the other partition is down and would - * keep sending IRQs and AMOs to it until the heartbeat times out. + * keep sending IRQs and amos to it until the heartbeat times out. */ (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> variable), @@ -418,20 +421,20 @@ xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part) { struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part_sn2->remote_amos_page_pa + - (XPC_ENGAGED_PARTITIONS_AMO * - sizeof(AMO_t))); + struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa + + (XPC_ENGAGED_PARTITIONS_AMO * + sizeof(struct amo))); local_irq_save(irq_flags); - /* clear bit corresponding to our partid in remote partition's AMO */ + /* clear bit corresponding to our partid in remote partition's amo */ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, ~(1UL << sn_partition_id)); /* * We must always use the nofault function regardless of whether we * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we * didn't, we'd never know that the other partition is down and would - * keep sending IRQs and AMOs to it until the heartbeat times out. + * keep sending IRQs and amos to it until the heartbeat times out. */ (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> variable), @@ -441,7 +444,7 @@ xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part) /* * Send activate IRQ to get other side to see that we've cleared our - * bit in their engaged partitions AMO. + * bit in their engaged partitions amo. */ xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa, cnodeid_to_nasid(0), @@ -452,9 +455,9 @@ xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part) static int xpc_partition_engaged_sn2(short partid) { - AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; + struct amo *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; - /* our partition's AMO variable ANDed with partid mask */ + /* our partition's amo variable ANDed with partid mask */ return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & (1UL << partid)) != 0; } @@ -462,18 +465,18 @@ xpc_partition_engaged_sn2(short partid) static int xpc_any_partition_engaged_sn2(void) { - AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; + struct amo *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; - /* our partition's AMO variable */ + /* our partition's amo variable */ return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) != 0; } static void xpc_assume_partition_disengaged_sn2(short partid) { - AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; + struct amo *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; - /* clear bit(s) based on partid mask in our partition's AMO */ + /* clear bit(s) based on partid mask in our partition's amo */ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, ~(1UL << partid)); } @@ -482,10 +485,10 @@ xpc_assume_partition_disengaged_sn2(short partid) static u64 xpc_prot_vec_sn2[MAX_NUMNODES]; /* - * Change protections to allow AMO operations on non-Shub 1.1 systems. + * Change protections to allow amo operations on non-Shub 1.1 systems. */ static enum xp_retval -xpc_allow_AMO_ops_sn2(AMO_t *amos_page) +xpc_allow_amo_ops_sn2(struct amo *amos_page) { u64 nasid_array = 0; int ret; @@ -493,7 +496,7 @@ xpc_allow_AMO_ops_sn2(AMO_t *amos_page) /* * On SHUB 1.1, we cannot call sn_change_memprotect() since the BIST * collides with memory operations. On those systems we call - * xpc_allow_AMO_ops_shub_wars_1_1_sn2() instead. + * xpc_allow_amo_ops_shub_wars_1_1_sn2() instead. */ if (!enable_shub_wars_1_1()) { ret = sn_change_memprotect(ia64_tpa((u64)amos_page), PAGE_SIZE, @@ -506,10 +509,10 @@ xpc_allow_AMO_ops_sn2(AMO_t *amos_page) } /* - * Change protections to allow AMO operations on Shub 1.1 systems. + * Change protections to allow amo operations on Shub 1.1 systems. */ static void -xpc_allow_AMO_ops_shub_wars_1_1_sn2(void) +xpc_allow_amo_ops_shub_wars_1_1_sn2(void) { int node; int nasid; @@ -536,7 +539,7 @@ xpc_allow_AMO_ops_shub_wars_1_1_sn2(void) static enum xp_retval xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) { - AMO_t *amos_page; + struct amo *amos_page; int i; int ret; @@ -549,32 +552,32 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) XPC_RP_VARS_SIZE); /* - * Before clearing xpc_vars, see if a page of AMOs had been previously + * Before clearing xpc_vars, see if a page of amos had been previously * allocated. If not we'll need to allocate one and set permissions - * so that cross-partition AMOs are allowed. + * so that cross-partition amos are allowed. * - * The allocated AMO page needs MCA reporting to remain disabled after + * The allocated amo page needs MCA reporting to remain disabled after * XPC has unloaded. To make this work, we keep a copy of the pointer * to this page (i.e., amos_page) in the struct xpc_vars structure, * which is pointed to by the reserved page, and re-use that saved copy - * on subsequent loads of XPC. This AMO page is never freed, and its + * on subsequent loads of XPC. This amo page is never freed, and its * memory protections are never restricted. */ amos_page = xpc_vars->amos_page; if (amos_page == NULL) { - amos_page = (AMO_t *)TO_AMO(uncached_alloc_page(0, 1)); + amos_page = (struct amo *)TO_AMO(uncached_alloc_page(0, 1)); if (amos_page == NULL) { - dev_err(xpc_part, "can't allocate page of AMOs\n"); + dev_err(xpc_part, "can't allocate page of amos\n"); return xpNoMemory; } /* - * Open up AMO-R/W to cpu. This is done on Shub 1.1 systems - * when xpc_allow_AMO_ops_shub_wars_1_1_sn2() is called. + * Open up amo-R/W to cpu. This is done on Shub 1.1 systems + * when xpc_allow_amo_ops_shub_wars_1_1_sn2() is called. */ - ret = xpc_allow_AMO_ops_sn2(amos_page); + ret = xpc_allow_amo_ops_sn2(amos_page); if (ret != xpSuccess) { - dev_err(xpc_part, "can't allow AMO operations\n"); + dev_err(xpc_part, "can't allow amo operations\n"); uncached_free_page(__IA64_UNCACHED_OFFSET | TO_PHYS((u64)amos_page), 1); return ret; @@ -595,11 +598,11 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part_sn2) * xp_max_npartitions); - /* initialize the activate IRQ related AMO variables */ + /* initialize the activate IRQ related amo variables */ for (i = 0; i < xp_nasid_mask_words; i++) (void)xpc_init_IRQ_amo_sn2(XPC_ACTIVATE_IRQ_AMOS + i); - /* initialize the engaged remote partitions related AMO variables */ + /* initialize the engaged remote partitions related amo variables */ (void)xpc_init_IRQ_amo_sn2(XPC_ENGAGED_PARTITIONS_AMO); (void)xpc_init_IRQ_amo_sn2(XPC_DEACTIVATE_REQUEST_AMO); @@ -745,19 +748,20 @@ xpc_request_partition_deactivation_sn2(struct xpc_partition *part) { struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part_sn2->remote_amos_page_pa + - (XPC_DEACTIVATE_REQUEST_AMO * sizeof(AMO_t))); + struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa + + (XPC_DEACTIVATE_REQUEST_AMO * + sizeof(struct amo))); local_irq_save(irq_flags); - /* set bit corresponding to our partid in remote partition's AMO */ + /* set bit corresponding to our partid in remote partition's amo */ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, (1UL << sn_partition_id)); /* * We must always use the nofault function regardless of whether we * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we * didn't, we'd never know that the other partition is down and would - * keep sending IRQs and AMOs to it until the heartbeat times out. + * keep sending IRQs and amos to it until the heartbeat times out. */ (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> variable), @@ -767,7 +771,7 @@ xpc_request_partition_deactivation_sn2(struct xpc_partition *part) /* * Send activate IRQ to get other side to see that we've set our - * bit in their deactivate request AMO. + * bit in their deactivate request amo. */ xpc_send_activate_IRQ_sn2(part_sn2->remote_amos_page_pa, cnodeid_to_nasid(0), @@ -779,19 +783,20 @@ static void xpc_cancel_partition_deactivation_request_sn2(struct xpc_partition *part) { unsigned long irq_flags; - AMO_t *amo = (AMO_t *)__va(part->sn.sn2.remote_amos_page_pa + - (XPC_DEACTIVATE_REQUEST_AMO * sizeof(AMO_t))); + struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa + + (XPC_DEACTIVATE_REQUEST_AMO * + sizeof(struct amo))); local_irq_save(irq_flags); - /* clear bit corresponding to our partid in remote partition's AMO */ + /* clear bit corresponding to our partid in remote partition's amo */ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, ~(1UL << sn_partition_id)); /* * We must always use the nofault function regardless of whether we * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we * didn't, we'd never know that the other partition is down and would - * keep sending IRQs and AMOs to it until the heartbeat times out. + * keep sending IRQs and amos to it until the heartbeat times out. */ (void)xp_nofault_PIOR((u64 *)GLOBAL_MMR_ADDR(NASID_GET(&amo-> variable), @@ -803,9 +808,9 @@ xpc_cancel_partition_deactivation_request_sn2(struct xpc_partition *part) static int xpc_partition_deactivation_requested_sn2(short partid) { - AMO_t *amo = xpc_vars->amos_page + XPC_DEACTIVATE_REQUEST_AMO; + struct amo *amo = xpc_vars->amos_page + XPC_DEACTIVATE_REQUEST_AMO; - /* our partition's AMO variable ANDed with partid mask */ + /* our partition's amo variable ANDed with partid mask */ return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & (1UL << partid)) != 0; } @@ -976,7 +981,7 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) } /* - * Loop through the activation AMO variables and process any bits + * Loop through the activation amo variables and process any bits * which are set. Each bit indicates a nasid sending a partition * activation or deactivation request. * @@ -989,11 +994,11 @@ xpc_identify_activate_IRQ_sender_sn2(void) u64 nasid_mask; u64 nasid; /* remote nasid */ int n_IRQs_detected = 0; - AMO_t *act_amos; + struct amo *act_amos; act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS; - /* scan through act AMO variable looking for non-zero entries */ + /* scan through act amo variable looking for non-zero entries */ for (word = 0; word < xp_nasid_mask_words; word++) { if (xpc_exiting) @@ -1005,7 +1010,7 @@ xpc_identify_activate_IRQ_sender_sn2(void) continue; } - dev_dbg(xpc_part, "AMO[%d] gave back 0x%lx\n", word, + dev_dbg(xpc_part, "amo[%d] gave back 0x%lx\n", word, nasid_mask); /* @@ -1038,7 +1043,7 @@ xpc_process_activate_IRQ_rcvd_sn2(int n_IRQs_expected) n_IRQs_detected = xpc_identify_activate_IRQ_sender_sn2(); if (n_IRQs_detected < n_IRQs_expected) { - /* retry once to help avoid missing AMO */ + /* retry once to help avoid missing amo */ (void)xpc_identify_activate_IRQ_sender_sn2(); } } @@ -1386,7 +1391,7 @@ xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) part_sn2->remote_openclose_args_pa = pulled_entry->openclose_args_pa; part_sn2->remote_chctl_amo_va = - (AMO_t *)__va(pulled_entry->chctl_amo_pa); + (struct amo *)__va(pulled_entry->chctl_amo_pa); part_sn2->notify_IRQ_nasid = pulled_entry->notify_IRQ_nasid; part_sn2->notify_IRQ_phys_cpuid = pulled_entry->notify_IRQ_phys_cpuid; @@ -1417,7 +1422,7 @@ xpc_make_first_contact_sn2(struct xpc_partition *part) enum xp_retval ret; /* - * Register the remote partition's AMOs with SAL so it can handle + * Register the remote partition's amos with SAL so it can handle * and cleanup errors within that address range should the remote * partition go down. We don't unregister this range because it is * difficult to tell when outstanding writes to the remote partition @@ -2192,9 +2197,9 @@ xpc_init_sn2(void) xpc_send_msg = xpc_send_msg_sn2; xpc_received_msg = xpc_received_msg_sn2; - /* open up protections for IPI and [potentially] AMO operations */ + /* open up protections for IPI and [potentially] amo operations */ xpc_allow_IPI_ops_sn2(); - xpc_allow_AMO_ops_shub_wars_1_1_sn2(); + xpc_allow_amo_ops_shub_wars_1_1_sn2(); /* * This is safe to do before the xpc_hb_checker thread has started diff --git a/include/asm-ia64/sn/mspec.h b/include/asm-ia64/sn/mspec.h index dbe13c6121a..c1d3c50c322 100644 --- a/include/asm-ia64/sn/mspec.h +++ b/include/asm-ia64/sn/mspec.h @@ -4,7 +4,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (c) 2001-2004 Silicon Graphics, Inc. All rights reserved. + * Copyright (c) 2001-2008 Silicon Graphics, Inc. All rights reserved. */ #ifndef _ASM_IA64_SN_MSPEC_H @@ -32,26 +32,26 @@ #ifdef __KERNEL__ /* - * Each Atomic Memory Operation (AMO formerly known as fetchop) + * Each Atomic Memory Operation (amo, formerly known as fetchop) * variable is 64 bytes long. The first 8 bytes are used. The * remaining 56 bytes are unaddressable due to the operation taking * that portion of the address. * - * NOTE: The AMO_t _MUST_ be placed in either the first or second half - * of the cache line. The cache line _MUST NOT_ be used for anything - * other than additional AMO_t entries. This is because there are two + * NOTE: The amo structure _MUST_ be placed in either the first or second + * half of the cache line. The cache line _MUST NOT_ be used for anything + * other than additional amo entries. This is because there are two * addresses which reference the same physical cache line. One will * be a cached entry with the memory type bits all set. This address - * may be loaded into processor cache. The AMO_t will be referenced + * may be loaded into processor cache. The amo will be referenced * uncached via the memory special memory type. If any portion of the * cached cache-line is modified, when that line is flushed, it will * overwrite the uncached value in physical memory and lead to * inconsistency. */ -typedef struct { +struct amo { u64 variable; u64 unused[7]; -} AMO_t; +}; #endif /* __KERNEL__ */ -- GitLab From 185c3a1b4bb4353529257f97caaeaac6c695e77d Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:11 -0700 Subject: [PATCH 0403/1024] sgi-xp: isolate allocation of XPC's msgqueues to sn2 only Move the allocation of XPC's msgqueues to xpc_sn2.c. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc.h | 3 +- drivers/misc/sgi-xp/xpc_channel.c | 197 +--------------------------- drivers/misc/sgi-xp/xpc_main.c | 2 + drivers/misc/sgi-xp/xpc_sn2.c | 205 ++++++++++++++++++++++++++++-- 4 files changed, 204 insertions(+), 203 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index da2680892df..defd0888118 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -666,6 +666,8 @@ extern void (*xpc_online_heartbeat) (void); extern void (*xpc_check_remote_hb) (void); extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *); extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *); +extern enum xp_retval (*xpc_allocate_msgqueues) (struct xpc_channel *); +extern void (*xpc_free_msgqueues) (struct xpc_channel *); extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *); extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int); extern int (*xpc_n_of_deliverable_msgs) (struct xpc_channel *); @@ -728,7 +730,6 @@ extern void xpc_deactivate_partition(const int, struct xpc_partition *, extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *); /* found in xpc_channel.c */ -extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **); extern void xpc_initiate_connect(int); extern void xpc_initiate_disconnect(int); extern enum xp_retval xpc_allocate_msg_wait(struct xpc_channel *); diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 0d3c153d1d0..1c73423665b 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -24,145 +24,6 @@ #include #include "xpc.h" -/* - * Guarantee that the kzalloc'd memory is cacheline aligned. - */ -void * -xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) -{ - /* see if kzalloc will give us cachline aligned memory by default */ - *base = kzalloc(size, flags); - if (*base == NULL) - return NULL; - - if ((u64)*base == L1_CACHE_ALIGN((u64)*base)) - return *base; - - kfree(*base); - - /* nope, we'll have to do it ourselves */ - *base = kzalloc(size + L1_CACHE_BYTES, flags); - if (*base == NULL) - return NULL; - - return (void *)L1_CACHE_ALIGN((u64)*base); -} - -/* - * Allocate the local message queue and the notify queue. - */ -static enum xp_retval -xpc_allocate_local_msgqueue(struct xpc_channel *ch) -{ - unsigned long irq_flags; - int nentries; - size_t nbytes; - - for (nentries = ch->local_nentries; nentries > 0; nentries--) { - - nbytes = nentries * ch->msg_size; - ch->local_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes, - GFP_KERNEL, - &ch->local_msgqueue_base); - if (ch->local_msgqueue == NULL) - continue; - - nbytes = nentries * sizeof(struct xpc_notify); - ch->notify_queue = kzalloc(nbytes, GFP_KERNEL); - if (ch->notify_queue == NULL) { - kfree(ch->local_msgqueue_base); - ch->local_msgqueue = NULL; - continue; - } - - spin_lock_irqsave(&ch->lock, irq_flags); - if (nentries < ch->local_nentries) { - dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, " - "partid=%d, channel=%d\n", nentries, - ch->local_nentries, ch->partid, ch->number); - - ch->local_nentries = nentries; - } - spin_unlock_irqrestore(&ch->lock, irq_flags); - return xpSuccess; - } - - dev_dbg(xpc_chan, "can't get memory for local message queue and notify " - "queue, partid=%d, channel=%d\n", ch->partid, ch->number); - return xpNoMemory; -} - -/* - * Allocate the cached remote message queue. - */ -static enum xp_retval -xpc_allocate_remote_msgqueue(struct xpc_channel *ch) -{ - unsigned long irq_flags; - int nentries; - size_t nbytes; - - DBUG_ON(ch->remote_nentries <= 0); - - for (nentries = ch->remote_nentries; nentries > 0; nentries--) { - - nbytes = nentries * ch->msg_size; - ch->remote_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes, - GFP_KERNEL, - &ch->remote_msgqueue_base); - if (ch->remote_msgqueue == NULL) - continue; - - spin_lock_irqsave(&ch->lock, irq_flags); - if (nentries < ch->remote_nentries) { - dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, " - "partid=%d, channel=%d\n", nentries, - ch->remote_nentries, ch->partid, ch->number); - - ch->remote_nentries = nentries; - } - spin_unlock_irqrestore(&ch->lock, irq_flags); - return xpSuccess; - } - - dev_dbg(xpc_chan, "can't get memory for cached remote message queue, " - "partid=%d, channel=%d\n", ch->partid, ch->number); - return xpNoMemory; -} - -/* - * Allocate message queues and other stuff associated with a channel. - * - * Note: Assumes all of the channel sizes are filled in. - */ -static enum xp_retval -xpc_allocate_msgqueues(struct xpc_channel *ch) -{ - unsigned long irq_flags; - enum xp_retval ret; - - DBUG_ON(ch->flags & XPC_C_SETUP); - - ret = xpc_allocate_local_msgqueue(ch); - if (ret != xpSuccess) - return ret; - - ret = xpc_allocate_remote_msgqueue(ch); - if (ret != xpSuccess) { - kfree(ch->local_msgqueue_base); - ch->local_msgqueue = NULL; - kfree(ch->notify_queue); - ch->notify_queue = NULL; - return ret; - } - - spin_lock_irqsave(&ch->lock, irq_flags); - ch->flags |= XPC_C_SETUP; - spin_unlock_irqrestore(&ch->lock, irq_flags); - - return xpSuccess; -} - /* * Process a connect message from a remote partition. * @@ -191,10 +52,11 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (ret != xpSuccess) XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags); + ch->flags |= XPC_C_SETUP; + if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING)) return; - DBUG_ON(!(ch->flags & XPC_C_SETUP)); DBUG_ON(ch->local_msgqueue == NULL); DBUG_ON(ch->remote_msgqueue == NULL); } @@ -219,55 +81,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) spin_lock_irqsave(&ch->lock, *irq_flags); } -/* - * Free up message queues and other stuff that were allocated for the specified - * channel. - * - * Note: ch->reason and ch->reason_line are left set for debugging purposes, - * they're cleared when XPC_C_DISCONNECTED is cleared. - */ -static void -xpc_free_msgqueues(struct xpc_channel *ch) -{ - struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; - - DBUG_ON(!spin_is_locked(&ch->lock)); - DBUG_ON(atomic_read(&ch->n_to_notify) != 0); - - ch->remote_msgqueue_pa = 0; - ch->func = NULL; - ch->key = NULL; - ch->msg_size = 0; - ch->local_nentries = 0; - ch->remote_nentries = 0; - ch->kthreads_assigned_limit = 0; - ch->kthreads_idle_limit = 0; - - ch_sn2->local_GP->get = 0; - ch_sn2->local_GP->put = 0; - ch_sn2->remote_GP.get = 0; - ch_sn2->remote_GP.put = 0; - ch_sn2->w_local_GP.get = 0; - ch_sn2->w_local_GP.put = 0; - ch_sn2->w_remote_GP.get = 0; - ch_sn2->w_remote_GP.put = 0; - ch_sn2->next_msg_to_pull = 0; - - if (ch->flags & XPC_C_SETUP) { - ch->flags &= ~XPC_C_SETUP; - - dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n", - ch->flags, ch->partid, ch->number); - - kfree(ch->local_msgqueue_base); - ch->local_msgqueue = NULL; - kfree(ch->remote_msgqueue_base); - ch->remote_msgqueue = NULL; - kfree(ch->notify_queue); - ch->notify_queue = NULL; - } -} - /* * spin_lock_irqsave() is expected to be held on entry. */ @@ -331,7 +144,11 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) /* it's now safe to free the channel's message queues */ xpc_free_msgqueues(ch); - /* mark disconnected, clear all other flags except XPC_C_WDISCONNECT */ + /* + * Mark the channel disconnected and clear all other flags, including + * XPC_C_SETUP (because of call to xpc_free_msgqueues()) but not + * including XPC_C_WDISCONNECT (if it was set). + */ ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT)); atomic_dec(&part->nchannels_active); diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 2934b447300..b5f3c5e59db 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -186,6 +186,8 @@ void (*xpc_check_remote_hb) (void); enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part); void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch); u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part); +enum xp_retval (*xpc_allocate_msgqueues) (struct xpc_channel *ch); +void (*xpc_free_msgqueues) (struct xpc_channel *ch); void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number); int (*xpc_n_of_deliverable_msgs) (struct xpc_channel *ch); struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *ch); diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 01dd40ec2a8..e5dc8c44c6f 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -1048,6 +1048,30 @@ xpc_process_activate_IRQ_rcvd_sn2(int n_IRQs_expected) } } +/* + * Guarantee that the kzalloc'd memory is cacheline aligned. + */ +static void * +xpc_kzalloc_cacheline_aligned_sn2(size_t size, gfp_t flags, void **base) +{ + /* see if kzalloc will give us cachline aligned memory by default */ + *base = kzalloc(size, flags); + if (*base == NULL) + return NULL; + + if ((u64)*base == L1_CACHE_ALIGN((u64)*base)) + return *base; + + kfree(*base); + + /* nope, we'll have to do it ourselves */ + *base = kzalloc(size + L1_CACHE_BYTES, flags); + if (*base == NULL) + return NULL; + + return (void *)L1_CACHE_ALIGN((u64)*base); +} + /* * Setup the infrastructure necessary to support XPartition Communication * between the specified remote partition and the local one. @@ -1078,10 +1102,9 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) /* allocate all the required GET/PUT values */ - part_sn2->local_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, - GFP_KERNEL, - &part_sn2-> - local_GPs_base); + part_sn2->local_GPs = + xpc_kzalloc_cacheline_aligned_sn2(XPC_GP_SIZE, GFP_KERNEL, + &part_sn2->local_GPs_base); if (part_sn2->local_GPs == NULL) { dev_err(xpc_chan, "can't get memory for local get/put " "values\n"); @@ -1089,10 +1112,9 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) goto out_1; } - part_sn2->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, - GFP_KERNEL, - &part_sn2-> - remote_GPs_base); + part_sn2->remote_GPs = + xpc_kzalloc_cacheline_aligned_sn2(XPC_GP_SIZE, GFP_KERNEL, + &part_sn2->remote_GPs_base); if (part_sn2->remote_GPs == NULL) { dev_err(xpc_chan, "can't get memory for remote get/put " "values\n"); @@ -1105,8 +1127,9 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) /* allocate all the required open and close args */ part->local_openclose_args = - xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL, - &part->local_openclose_args_base); + xpc_kzalloc_cacheline_aligned_sn2(XPC_OPENCLOSE_ARGS_SIZE, + GFP_KERNEL, + &part->local_openclose_args_base); if (part->local_openclose_args == NULL) { dev_err(xpc_chan, "can't get memory for local connect args\n"); retval = xpNoMemory; @@ -1114,8 +1137,9 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) } part->remote_openclose_args = - xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, GFP_KERNEL, - &part->remote_openclose_args_base); + xpc_kzalloc_cacheline_aligned_sn2(XPC_OPENCLOSE_ARGS_SIZE, + GFP_KERNEL, + &part->remote_openclose_args_base); if (part->remote_openclose_args == NULL) { dev_err(xpc_chan, "can't get memory for remote connect args\n"); retval = xpNoMemory; @@ -1527,6 +1551,161 @@ xpc_get_chctl_all_flags_sn2(struct xpc_partition *part) return chctl.all_flags; } +/* + * Allocate the local message queue and the notify queue. + */ +static enum xp_retval +xpc_allocate_local_msgqueue_sn2(struct xpc_channel *ch) +{ + unsigned long irq_flags; + int nentries; + size_t nbytes; + + for (nentries = ch->local_nentries; nentries > 0; nentries--) { + + nbytes = nentries * ch->msg_size; + ch->local_msgqueue = + xpc_kzalloc_cacheline_aligned_sn2(nbytes, GFP_KERNEL, + &ch->local_msgqueue_base); + if (ch->local_msgqueue == NULL) + continue; + + nbytes = nentries * sizeof(struct xpc_notify); + ch->notify_queue = kzalloc(nbytes, GFP_KERNEL); + if (ch->notify_queue == NULL) { + kfree(ch->local_msgqueue_base); + ch->local_msgqueue = NULL; + continue; + } + + spin_lock_irqsave(&ch->lock, irq_flags); + if (nentries < ch->local_nentries) { + dev_dbg(xpc_chan, "nentries=%d local_nentries=%d, " + "partid=%d, channel=%d\n", nentries, + ch->local_nentries, ch->partid, ch->number); + + ch->local_nentries = nentries; + } + spin_unlock_irqrestore(&ch->lock, irq_flags); + return xpSuccess; + } + + dev_dbg(xpc_chan, "can't get memory for local message queue and notify " + "queue, partid=%d, channel=%d\n", ch->partid, ch->number); + return xpNoMemory; +} + +/* + * Allocate the cached remote message queue. + */ +static enum xp_retval +xpc_allocate_remote_msgqueue_sn2(struct xpc_channel *ch) +{ + unsigned long irq_flags; + int nentries; + size_t nbytes; + + DBUG_ON(ch->remote_nentries <= 0); + + for (nentries = ch->remote_nentries; nentries > 0; nentries--) { + + nbytes = nentries * ch->msg_size; + ch->remote_msgqueue = + xpc_kzalloc_cacheline_aligned_sn2(nbytes, GFP_KERNEL, + &ch->remote_msgqueue_base); + if (ch->remote_msgqueue == NULL) + continue; + + spin_lock_irqsave(&ch->lock, irq_flags); + if (nentries < ch->remote_nentries) { + dev_dbg(xpc_chan, "nentries=%d remote_nentries=%d, " + "partid=%d, channel=%d\n", nentries, + ch->remote_nentries, ch->partid, ch->number); + + ch->remote_nentries = nentries; + } + spin_unlock_irqrestore(&ch->lock, irq_flags); + return xpSuccess; + } + + dev_dbg(xpc_chan, "can't get memory for cached remote message queue, " + "partid=%d, channel=%d\n", ch->partid, ch->number); + return xpNoMemory; +} + +/* + * Allocate message queues and other stuff associated with a channel. + * + * Note: Assumes all of the channel sizes are filled in. + */ +static enum xp_retval +xpc_allocate_msgqueues_sn2(struct xpc_channel *ch) +{ + enum xp_retval ret; + + DBUG_ON(ch->flags & XPC_C_SETUP); + + ret = xpc_allocate_local_msgqueue_sn2(ch); + if (ret == xpSuccess) { + + ret = xpc_allocate_remote_msgqueue_sn2(ch); + if (ret != xpSuccess) { + kfree(ch->local_msgqueue_base); + ch->local_msgqueue = NULL; + kfree(ch->notify_queue); + ch->notify_queue = NULL; + } + } + return ret; +} + +/* + * Free up message queues and other stuff that were allocated for the specified + * channel. + * + * Note: ch->reason and ch->reason_line are left set for debugging purposes, + * they're cleared when XPC_C_DISCONNECTED is cleared. + */ +static void +xpc_free_msgqueues_sn2(struct xpc_channel *ch) +{ + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; + + DBUG_ON(!spin_is_locked(&ch->lock)); + DBUG_ON(atomic_read(&ch->n_to_notify) != 0); + + ch->remote_msgqueue_pa = 0; + ch->func = NULL; + ch->key = NULL; + ch->msg_size = 0; + ch->local_nentries = 0; + ch->remote_nentries = 0; + ch->kthreads_assigned_limit = 0; + ch->kthreads_idle_limit = 0; + + ch_sn2->local_GP->get = 0; + ch_sn2->local_GP->put = 0; + ch_sn2->remote_GP.get = 0; + ch_sn2->remote_GP.put = 0; + ch_sn2->w_local_GP.get = 0; + ch_sn2->w_local_GP.put = 0; + ch_sn2->w_remote_GP.get = 0; + ch_sn2->w_remote_GP.put = 0; + ch_sn2->next_msg_to_pull = 0; + + if (ch->flags & XPC_C_SETUP) { + dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n", + ch->flags, ch->partid, ch->number); + + kfree(ch->local_msgqueue_base); + ch->local_msgqueue = NULL; + kfree(ch->remote_msgqueue_base); + ch->remote_msgqueue = NULL; + kfree(ch->notify_queue); + ch->notify_queue = NULL; + } +} + /* * Notify those who wanted to be notified upon delivery of their message. */ @@ -2177,6 +2356,8 @@ xpc_init_sn2(void) xpc_teardown_infrastructure = xpc_teardown_infrastructure_sn2; xpc_make_first_contact = xpc_make_first_contact_sn2; xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2; + xpc_allocate_msgqueues = xpc_allocate_msgqueues_sn2; + xpc_free_msgqueues = xpc_free_msgqueues_sn2; xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2; xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2; xpc_n_of_deliverable_msgs = xpc_n_of_deliverable_msgs_sn2; -- GitLab From a7b4d509205db5e9cd3ffc77b306d7b10fe6a34d Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:12 -0700 Subject: [PATCH 0404/1024] sgi-xp: enable XPNET to handle more than 64 partitions Enable XPNET to support more than 64 partitions. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpnet.c | 213 ++++++++++++++++-------------------- 1 file changed, 94 insertions(+), 119 deletions(-) diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index f9356ba7315..c5f59a6dae5 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -21,7 +21,6 @@ */ #include -#include #include #include #include @@ -32,8 +31,6 @@ #include #include #include -#include -#include #include #include "xp.h" @@ -104,7 +101,6 @@ struct xpnet_message { * then be released. */ struct xpnet_pending_msg { - struct list_head free_list; struct sk_buff *skb; atomic_t use_count; }; @@ -120,7 +116,7 @@ struct net_device *xpnet_device; * When we are notified of other partitions activating, we add them to * our bitmask of partitions to which we broadcast. */ -static u64 xpnet_broadcast_partitions; +static unsigned long *xpnet_broadcast_partitions; /* protect above */ static DEFINE_SPINLOCK(xpnet_broadcast_lock); @@ -140,16 +136,13 @@ static DEFINE_SPINLOCK(xpnet_broadcast_lock); #define XPNET_DEF_MTU (0x8000UL) /* - * The partition id is encapsulated in the MAC address. The following - * define locates the octet the partid is in. + * The partid is encapsulated in the MAC address beginning in the following + * octet and it consists of two octets. */ -#define XPNET_PARTID_OCTET 1 -#define XPNET_LICENSE_OCTET 2 +#define XPNET_PARTID_OCTET 2 + +/* Define the XPNET debug device structures to be used with dev_dbg() et al */ -/* - * Define the XPNET debug device structure that is to be used with dev_dbg(), - * dev_err(), dev_warn(), and dev_info(). - */ struct device_driver xpnet_dbg_name = { .name = "xpnet" }; @@ -231,7 +224,7 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg) (void *)msg->buf_pa, msg->size); ret = xp_remote_memcpy((void *)((u64)skb->data & - ~(L1_CACHE_BYTES - 1)), + ~(L1_CACHE_BYTES - 1)), (void *)msg->buf_pa, msg->size); if (ret != xpSuccess) { @@ -283,8 +276,6 @@ static void xpnet_connection_activity(enum xp_retval reason, short partid, int channel, void *data, void *key) { - long bp; - DBUG_ON(partid < 0 || partid >= xp_max_npartitions); DBUG_ON(channel != XPC_NET_CHANNEL); @@ -297,31 +288,28 @@ xpnet_connection_activity(enum xp_retval reason, short partid, int channel, case xpConnected: /* connection completed to a partition */ spin_lock_bh(&xpnet_broadcast_lock); - xpnet_broadcast_partitions |= 1UL << (partid - 1); - bp = xpnet_broadcast_partitions; + __set_bit(partid, xpnet_broadcast_partitions); spin_unlock_bh(&xpnet_broadcast_lock); netif_carrier_on(xpnet_device); - dev_dbg(xpnet, "%s connection created to partition %d; " - "xpnet_broadcast_partitions=0x%lx\n", - xpnet_device->name, partid, bp); + dev_dbg(xpnet, "%s connected to partition %d\n", + xpnet_device->name, partid); break; default: spin_lock_bh(&xpnet_broadcast_lock); - xpnet_broadcast_partitions &= ~(1UL << (partid - 1)); - bp = xpnet_broadcast_partitions; + __clear_bit(partid, xpnet_broadcast_partitions); spin_unlock_bh(&xpnet_broadcast_lock); - if (bp == 0) + if (bitmap_empty((unsigned long *)xpnet_broadcast_partitions, + xp_max_npartitions)) { netif_carrier_off(xpnet_device); + } - dev_dbg(xpnet, "%s disconnected from partition %d; " - "xpnet_broadcast_partitions=0x%lx\n", - xpnet_device->name, partid, bp); + dev_dbg(xpnet, "%s disconnected from partition %d\n", + xpnet_device->name, partid); break; - } } @@ -424,36 +412,72 @@ xpnet_send_completed(enum xp_retval reason, short partid, int channel, } } +static void +xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg, + u64 start_addr, u64 end_addr, u16 embedded_bytes, int dest_partid) +{ + u8 msg_buffer[XPNET_MSG_SIZE]; + struct xpnet_message *msg = (struct xpnet_message *)&msg_buffer; + enum xp_retval ret; + + msg->embedded_bytes = embedded_bytes; + if (unlikely(embedded_bytes != 0)) { + msg->version = XPNET_VERSION_EMBED; + dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n", + &msg->data, skb->data, (size_t)embedded_bytes); + skb_copy_from_linear_data(skb, &msg->data, + (size_t)embedded_bytes); + } else { + msg->version = XPNET_VERSION; + } + msg->magic = XPNET_MAGIC; + msg->size = end_addr - start_addr; + msg->leadin_ignore = (u64)skb->data - start_addr; + msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb); + msg->buf_pa = __pa(start_addr); + + dev_dbg(xpnet, "sending XPC message to %d:%d\n" + KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, " + "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n", + dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size, + msg->leadin_ignore, msg->tailout_ignore); + + atomic_inc(&queued_msg->use_count); + + ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, XPC_NOWAIT, msg, + XPNET_MSG_SIZE, xpnet_send_completed, queued_msg); + if (unlikely(ret != xpSuccess)) + atomic_dec(&queued_msg->use_count); +} + /* * Network layer has formatted a packet (skb) and is ready to place it * "on the wire". Prepare and send an xpnet_message to all partitions * which have connected with us and are targets of this packet. * * MAC-NOTE: For the XPNET driver, the MAC address contains the - * destination partition_id. If the destination partition id word - * is 0xff, this packet is to broadcast to all partitions. + * destination partid. If the destination partid octets are 0xffff, + * this packet is to be broadcast to all connected partitions. */ static int xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct xpnet_pending_msg *queued_msg; - enum xp_retval ret; - u8 msg_buffer[XPNET_MSG_SIZE]; - struct xpnet_message *msg = (struct xpnet_message *)&msg_buffer[0]; u64 start_addr, end_addr; - long dp; - u8 second_mac_octet; short dest_partid; - struct xpnet_dev_private *priv; - u16 embedded_bytes; - - priv = (struct xpnet_dev_private *)dev->priv; + struct xpnet_dev_private *priv = (struct xpnet_dev_private *)dev->priv; + u16 embedded_bytes = 0; dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p " "skb->end=0x%p skb->len=%d\n", (void *)skb->head, (void *)skb->data, skb_tail_pointer(skb), skb_end_pointer(skb), skb->len); + if (skb->data[0] == 0x33) { + dev_kfree_skb(skb); + return 0; /* nothing needed to be done */ + } + /* * The xpnet_pending_msg tracks how many outstanding * xpc_send_notifies are relying on this skb. When none @@ -465,7 +489,6 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) "packet\n", sizeof(struct xpnet_pending_msg)); priv->stats.tx_errors++; - return -ENOMEM; } @@ -474,7 +497,6 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) end_addr = L1_CACHE_ALIGN((u64)skb_tail_pointer(skb)); /* calculate how many bytes to embed in the XPC message */ - embedded_bytes = 0; if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) { /* skb->data does fit so embed */ embedded_bytes = skb->len; @@ -490,78 +512,28 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) atomic_set(&queued_msg->use_count, 1); queued_msg->skb = skb; - second_mac_octet = skb->data[XPNET_PARTID_OCTET]; - if (second_mac_octet == 0xff) { + if (skb->data[0] == 0xff) { /* we are being asked to broadcast to all partitions */ - dp = xpnet_broadcast_partitions; - } else if (second_mac_octet != 0) { - dp = xpnet_broadcast_partitions & - (1UL << (second_mac_octet - 1)); - } else { - /* 0 is an invalid partid. Ignore */ - dp = 0; - } - dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp); - - /* - * If we wanted to allow promiscuous mode to work like an - * unswitched network, this would be a good point to OR in a - * mask of partitions which should be receiving all packets. - */ - - /* - * Main send loop. - */ - for (dest_partid = 0; dp && dest_partid < xp_max_npartitions; - dest_partid++) { + for_each_bit(dest_partid, xpnet_broadcast_partitions, + xp_max_npartitions) { - if (!(dp & (1UL << (dest_partid - 1)))) { - /* not destined for this partition */ - continue; + xpnet_send(skb, queued_msg, start_addr, end_addr, + embedded_bytes, dest_partid); } + } else { + dest_partid = (short)skb->data[XPNET_PARTID_OCTET + 1]; + dest_partid |= (short)skb->data[XPNET_PARTID_OCTET + 0] << 8; - /* remove this partition from the destinations mask */ - dp &= ~(1UL << (dest_partid - 1)); - - /* found a partition to send to */ + if (dest_partid >= 0 && + dest_partid < xp_max_npartitions && + test_bit(dest_partid, xpnet_broadcast_partitions) != 0) { - msg->embedded_bytes = embedded_bytes; - if (unlikely(embedded_bytes != 0)) { - msg->version = XPNET_VERSION_EMBED; - dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n", - &msg->data, skb->data, (size_t)embedded_bytes); - skb_copy_from_linear_data(skb, &msg->data, - (size_t)embedded_bytes); - } else { - msg->version = XPNET_VERSION; - } - msg->magic = XPNET_MAGIC; - msg->size = end_addr - start_addr; - msg->leadin_ignore = (u64)skb->data - start_addr; - msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb); - msg->buf_pa = __pa(start_addr); - - dev_dbg(xpnet, "sending XPC message to %d:%d\n" - KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, " - "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n", - dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size, - msg->leadin_ignore, msg->tailout_ignore); - - atomic_inc(&queued_msg->use_count); - - ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, XPC_NOWAIT, - &msg, sizeof(msg) + embedded_bytes - 1, - xpnet_send_completed, queued_msg); - if (unlikely(ret != xpSuccess)) { - atomic_dec(&queued_msg->use_count); - continue; + xpnet_send(skb, queued_msg, start_addr, end_addr, + embedded_bytes, dest_partid); } } if (atomic_dec_return(&queued_msg->use_count) == 0) { - dev_dbg(xpnet, "no partitions to receive packet destined for " - "%d\n", dest_partid); - dev_kfree_skb(skb); kfree(queued_msg); } @@ -589,23 +561,28 @@ xpnet_dev_tx_timeout(struct net_device *dev) static int __init xpnet_init(void) { - int i; - u32 license_num; - int result = -ENOMEM; + int result; - if (!ia64_platform_is("sn2")) + if (!is_shub() && !is_uv()) return -ENODEV; dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME); + xpnet_broadcast_partitions = kzalloc(BITS_TO_LONGS(xp_max_npartitions) * + sizeof(long), GFP_KERNEL); + if (xpnet_broadcast_partitions == NULL) + return -ENOMEM; + /* * use ether_setup() to init the majority of our device * structure and then override the necessary pieces. */ xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private), XPNET_DEVICE_NAME, ether_setup); - if (xpnet_device == NULL) + if (xpnet_device == NULL) { + kfree(xpnet_broadcast_partitions); return -ENOMEM; + } netif_carrier_off(xpnet_device); @@ -623,14 +600,10 @@ xpnet_init(void) * MAC addresses. We chose the first octet of the MAC to be unlikely * to collide with any vendor's officially issued MAC. */ - xpnet_device->dev_addr[0] = 0xfe; - xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id; - license_num = sn_partition_serial_number_val(); - for (i = 3; i >= 0; i--) { - xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] = - license_num & 0xff; - license_num = license_num >> 8; - } + xpnet_device->dev_addr[0] = 0x02; /* locally administered, no OUI */ + + xpnet_device->dev_addr[XPNET_PARTID_OCTET + 1] = sn_partition_id; + xpnet_device->dev_addr[XPNET_PARTID_OCTET + 0] = (sn_partition_id >> 8); /* * ether_setup() sets this to a multicast device. We are @@ -646,8 +619,10 @@ xpnet_init(void) xpnet_device->features = NETIF_F_NO_CSUM; result = register_netdev(xpnet_device); - if (result != 0) + if (result != 0) { free_netdev(xpnet_device); + kfree(xpnet_broadcast_partitions); + } return result; } @@ -661,8 +636,8 @@ xpnet_exit(void) xpnet_device[0].name); unregister_netdev(xpnet_device); - free_netdev(xpnet_device); + kfree(xpnet_broadcast_partitions); } module_exit(xpnet_exit); -- GitLab From ee6665e3b6e1283c30ae240732af1345bc02154e Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:13 -0700 Subject: [PATCH 0405/1024] sgi-xp: isolate remote copy buffer to sn2 only Make the remote copy buffer an sn2 only item. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xp.h | 10 ---- drivers/misc/sgi-xp/xpc.h | 39 +++---------- drivers/misc/sgi-xp/xpc_main.c | 31 +++------- drivers/misc/sgi-xp/xpc_partition.c | 31 ++++------ drivers/misc/sgi-xp/xpc_sn2.c | 88 ++++++++++++++++++++++------- 5 files changed, 97 insertions(+), 102 deletions(-) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 43bf2470850..955b5b91323 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -60,16 +60,6 @@ #define XP_MAX_NPARTITIONS_SN2 64 #define XP_MAX_NPARTITIONS_UV 256 -/* - * Define the number of u64s required to represent all the C-brick nasids - * as a bitmap. The cross-partition kernel modules deal only with - * C-brick nasids, thus the need for bitmaps which don't account for - * odd-numbered (non C-brick) nasids. - */ -#define XP_MAX_PHYSNODE_ID (MAX_NUMALINK_NODES / 2) -#define XP_NASID_MASK_BYTES ((XP_MAX_PHYSNODE_ID + 7) / 8) -#define XP_NASID_MASK_WORDS ((XP_MAX_PHYSNODE_ID + 63) / 64) - /* * XPC establishes channel connections between the local partition and any * other partition that is currently up. Over these channels, kernel-level diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index defd0888118..2111723553b 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -150,26 +150,6 @@ struct xpc_vars_sn2 { #define XPC_V_VERSION _XPC_VERSION(3, 1) /* version 3.1 of the cross vars */ -/* - * The following pertains to ia64-sn2 only. - * - * Memory for XPC's amo variables is allocated by the MSPEC driver. These - * pages are located in the lowest granule. The lowest granule uses 4k pages - * for cached references and an alternate TLB handler to never provide a - * cacheable mapping for the entire region. This will prevent speculative - * reading of cached copies of our lines from being issued which will cause - * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 - * amo variables (based on XP_MAX_NPARTITIONS_SN2) to identify the senders of - * NOTIFY IRQs, 128 amo variables (based on XP_NASID_MASK_WORDS) to identify - * the senders of ACTIVATE IRQs, 1 amo variable to identify which remote - * partitions (i.e., XPCs) consider themselves currently engaged with the - * local XPC and 1 amo variable to request partition deactivation. - */ -#define XPC_NOTIFY_IRQ_AMOS 0 -#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_NPARTITIONS_SN2) -#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS) -#define XPC_DEACTIVATE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1) - /* * The following structure describes the per partition specific variables. * @@ -214,9 +194,10 @@ struct xpc_vars_part_sn2 { #define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars_sn2)) #define XPC_RP_PART_NASIDS(_rp) ((u64 *)((u8 *)(_rp) + XPC_RP_HEADER_SIZE)) -#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words) -#define XPC_RP_VARS(_rp) ((struct xpc_vars_sn2 *)(XPC_RP_MACH_NASIDS(_rp) + \ - xp_nasid_mask_words)) +#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xpc_nasid_mask_words) +#define XPC_RP_VARS(_rp) ((struct xpc_vars_sn2 *) \ + (XPC_RP_MACH_NASIDS(_rp) + \ + xpc_nasid_mask_words)) /* * Functions registered by add_timer() or called by kernel_thread() only @@ -225,11 +206,11 @@ struct xpc_vars_part_sn2 { * the passed argument. */ #define XPC_PACK_ARGS(_arg1, _arg2) \ - ((((u64) _arg1) & 0xffffffff) | \ - ((((u64) _arg2) & 0xffffffff) << 32)) + ((((u64)_arg1) & 0xffffffff) | \ + ((((u64)_arg2) & 0xffffffff) << 32)) -#define XPC_UNPACK_ARG1(_args) (((u64) _args) & 0xffffffff) -#define XPC_UNPACK_ARG2(_args) ((((u64) _args) >> 32) & 0xffffffff) +#define XPC_UNPACK_ARG1(_args) (((u64)_args) & 0xffffffff) +#define XPC_UNPACK_ARG2(_args) ((((u64)_args) >> 32) & 0xffffffff) /* * Define a Get/Put value pair (pointers) used with a message queue. @@ -710,12 +691,10 @@ extern void xpc_exit_uv(void); /* found in xpc_partition.c */ extern int xpc_exiting; -extern int xp_nasid_mask_words; +extern int xpc_nasid_mask_words; extern struct xpc_rsvd_page *xpc_rsvd_page; extern u64 *xpc_mach_nasids; extern struct xpc_partition *xpc_partitions; -extern char *xpc_remote_copy_buffer; -extern void *xpc_remote_copy_buffer_base; extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **); extern struct xpc_rsvd_page *xpc_setup_rsvd_page(void); extern int xpc_identify_activate_IRQ_sender(void); diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index b5f3c5e59db..36dfccea524 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -877,7 +877,6 @@ xpc_do_exit(enum xp_retval reason) unregister_sysctl_table(xpc_sysctl); kfree(xpc_partitions); - kfree(xpc_remote_copy_buffer_base); if (is_shub()) xpc_exit_sn2(); @@ -1031,7 +1030,9 @@ xpc_init(void) short partid; struct xpc_partition *part; struct task_struct *kthread; - size_t buf_size; + + snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part"); + snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan"); if (is_shub()) { /* @@ -1054,26 +1055,12 @@ xpc_init(void) return -ENODEV; } - snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part"); - snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan"); - - buf_size = max(XPC_RP_VARS_SIZE, - XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES); - xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size, - GFP_KERNEL, - &xpc_remote_copy_buffer_base); - if (xpc_remote_copy_buffer == NULL) { - dev_err(xpc_part, "can't get memory for remote copy buffer\n"); - ret = -ENOMEM; - goto out_1; - } - xpc_partitions = kzalloc(sizeof(struct xpc_partition) * xp_max_npartitions, GFP_KERNEL); if (xpc_partitions == NULL) { dev_err(xpc_part, "can't get memory for partition structure\n"); ret = -ENOMEM; - goto out_2; + goto out_1; } /* @@ -1115,7 +1102,7 @@ xpc_init(void) if (xpc_rsvd_page == NULL) { dev_err(xpc_part, "can't setup our reserved page\n"); ret = -EBUSY; - goto out_3; + goto out_2; } /* add ourselves to the reboot_notifier_list */ @@ -1136,7 +1123,7 @@ xpc_init(void) if (IS_ERR(kthread)) { dev_err(xpc_part, "failed while forking hb check thread\n"); ret = -EBUSY; - goto out_4; + goto out_3; } /* @@ -1164,18 +1151,16 @@ xpc_init(void) return 0; /* initialization was not successful */ -out_4: +out_3: /* indicate to others that our reserved page is uninitialized */ xpc_rsvd_page->stamp = 0; (void)unregister_die_notifier(&xpc_die_notifier); (void)unregister_reboot_notifier(&xpc_reboot_notifier); -out_3: +out_2: if (xpc_sysctl) unregister_sysctl_table(xpc_sysctl); kfree(xpc_partitions); -out_2: - kfree(xpc_remote_copy_buffer_base); out_1: if (is_shub()) xpc_exit_sn2(); diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index c769ab8f74e..9f104450478 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -34,20 +34,11 @@ struct xpc_rsvd_page *xpc_rsvd_page; static u64 *xpc_part_nasids; u64 *xpc_mach_nasids; -/* >>> next two variables should be 'xpc_' if they remain here */ -static int xp_sizeof_nasid_mask; /* actual size in bytes of nasid mask */ -int xp_nasid_mask_words; /* actual size in words of nasid mask */ +static int xpc_sizeof_nasid_mask; /* actual size in bytes of nasid mask */ +int xpc_nasid_mask_words; /* actual size in words of nasid mask */ struct xpc_partition *xpc_partitions; -/* - * Generic buffer used to store a local copy of portions of a remote - * partition's reserved page (either its header and part_nasids mask, - * or its vars). - */ -char *xpc_remote_copy_buffer; -void *xpc_remote_copy_buffer_base; - /* * Guarantee that the kmalloc'd memory is cacheline aligned. */ @@ -176,9 +167,9 @@ xpc_setup_rsvd_page(void) /* SAL_version 1 didn't set the nasids_size field */ rp->SAL_nasids_size = 128; } - xp_sizeof_nasid_mask = rp->SAL_nasids_size; - xp_nasid_mask_words = DIV_ROUND_UP(xp_sizeof_nasid_mask, - BYTES_PER_WORD); + xpc_sizeof_nasid_mask = rp->SAL_nasids_size; + xpc_nasid_mask_words = DIV_ROUND_UP(xpc_sizeof_nasid_mask, + BYTES_PER_WORD); /* setup the pointers to the various items in the reserved page */ xpc_part_nasids = XPC_RP_PART_NASIDS(rp); @@ -222,14 +213,14 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, /* pull over the reserved page header and part_nasids mask */ ret = xp_remote_memcpy(remote_rp, (void *)*remote_rp_pa, - XPC_RP_HEADER_SIZE + xp_sizeof_nasid_mask); + XPC_RP_HEADER_SIZE + xpc_sizeof_nasid_mask); if (ret != xpSuccess) return ret; if (discovered_nasids != NULL) { u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp); - for (i = 0; i < xp_nasid_mask_words; i++) + for (i = 0; i < xpc_nasid_mask_words; i++) discovered_nasids[i] |= remote_part_nasids[i]; } @@ -414,12 +405,12 @@ xpc_discovery(void) enum xp_retval ret; remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE + - xp_sizeof_nasid_mask, + xpc_sizeof_nasid_mask, GFP_KERNEL, &remote_rp_base); if (remote_rp == NULL) return; - discovered_nasids = kzalloc(sizeof(u64) * xp_nasid_mask_words, + discovered_nasids = kzalloc(sizeof(u64) * xpc_nasid_mask_words, GFP_KERNEL); if (discovered_nasids == NULL) { kfree(remote_rp_base); @@ -521,10 +512,10 @@ xpc_initiate_partid_to_nasids(short partid, void *nasid_mask) if (part->remote_rp_pa == 0) return xpPartitionDown; - memset(nasid_mask, 0, XP_NASID_MASK_BYTES); + memset(nasid_mask, 0, xpc_sizeof_nasid_mask); part_nasid_pa = (u64)XPC_RP_PART_NASIDS(part->remote_rp_pa); return xp_remote_memcpy(nasid_mask, (void *)part_nasid_pa, - xp_sizeof_nasid_mask); + xpc_sizeof_nasid_mask); } diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index e5dc8c44c6f..9c0c29a2ac8 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -19,6 +19,43 @@ #include #include "xpc.h" +/* + * Define the number of u64s required to represent all the C-brick nasids + * as a bitmap. The cross-partition kernel modules deal only with + * C-brick nasids, thus the need for bitmaps which don't account for + * odd-numbered (non C-brick) nasids. + */ +#define XPC_MAX_PHYSNODES_SN2 (MAX_NUMALINK_NODES / 2) +#define XP_NASID_MASK_BYTES_SN2 ((XPC_MAX_PHYSNODES_SN2 + 7) / 8) +#define XP_NASID_MASK_WORDS_SN2 ((XPC_MAX_PHYSNODES_SN2 + 63) / 64) + +/* + * Memory for XPC's amo variables is allocated by the MSPEC driver. These + * pages are located in the lowest granule. The lowest granule uses 4k pages + * for cached references and an alternate TLB handler to never provide a + * cacheable mapping for the entire region. This will prevent speculative + * reading of cached copies of our lines from being issued which will cause + * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64 + * amo variables (based on XP_MAX_NPARTITIONS_SN2) to identify the senders of + * NOTIFY IRQs, 128 amo variables (based on XP_NASID_MASK_WORDS_SN2) to identify + * the senders of ACTIVATE IRQs, 1 amo variable to identify which remote + * partitions (i.e., XPCs) consider themselves currently engaged with the + * local XPC and 1 amo variable to request partition deactivation. + */ +#define XPC_NOTIFY_IRQ_AMOS_SN2 0 +#define XPC_ACTIVATE_IRQ_AMOS_SN2 (XPC_NOTIFY_IRQ_AMOS_SN2 + \ + XP_MAX_NPARTITIONS_SN2) +#define XPC_ENGAGED_PARTITIONS_AMO_SN2 (XPC_ACTIVATE_IRQ_AMOS_SN2 + \ + XP_NASID_MASK_WORDS_SN2) +#define XPC_DEACTIVATE_REQUEST_AMO_SN2 (XPC_ENGAGED_PARTITIONS_AMO_SN2 + 1) + +/* + * Buffer used to store a local copy of portions of a remote partition's + * reserved page (either its header and part_nasids mask, or its vars). + */ +static char *xpc_remote_copy_buffer_sn2; +static void *xpc_remote_copy_buffer_base_sn2; + static struct xpc_vars_sn2 *xpc_vars; /* >>> Add _sn2 suffix? */ static struct xpc_vars_part_sn2 *xpc_vars_part; /* >>> Add _sn2 suffix? */ @@ -176,7 +213,7 @@ xpc_send_activate_IRQ_sn2(u64 amos_page_pa, int from_nasid, int to_nasid, int w_index = XPC_NASID_W_INDEX(from_nasid); int b_index = XPC_NASID_B_INDEX(from_nasid); struct amo *amos = (struct amo *)__va(amos_page_pa + - (XPC_ACTIVATE_IRQ_AMOS * + (XPC_ACTIVATE_IRQ_AMOS_SN2 * sizeof(struct amo))); (void)xpc_send_IRQ_sn2(&amos[w_index], (1UL << b_index), to_nasid, @@ -189,7 +226,7 @@ xpc_send_local_activate_IRQ_sn2(int from_nasid) int w_index = XPC_NASID_W_INDEX(from_nasid); int b_index = XPC_NASID_B_INDEX(from_nasid); struct amo *amos = (struct amo *)__va(xpc_vars->amos_page_pa + - (XPC_ACTIVATE_IRQ_AMOS * + (XPC_ACTIVATE_IRQ_AMOS_SN2 * sizeof(struct amo))); /* fake the sending and receipt of an activate IRQ from remote nasid */ @@ -395,7 +432,7 @@ xpc_indicate_partition_engaged_sn2(struct xpc_partition *part) { unsigned long irq_flags; struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa + - (XPC_ENGAGED_PARTITIONS_AMO * + (XPC_ENGAGED_PARTITIONS_AMO_SN2 * sizeof(struct amo))); local_irq_save(irq_flags); @@ -422,7 +459,7 @@ xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part) struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; unsigned long irq_flags; struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa + - (XPC_ENGAGED_PARTITIONS_AMO * + (XPC_ENGAGED_PARTITIONS_AMO_SN2 * sizeof(struct amo))); local_irq_save(irq_flags); @@ -455,7 +492,7 @@ xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part) static int xpc_partition_engaged_sn2(short partid) { - struct amo *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; + struct amo *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO_SN2; /* our partition's amo variable ANDed with partid mask */ return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & @@ -465,7 +502,7 @@ xpc_partition_engaged_sn2(short partid) static int xpc_any_partition_engaged_sn2(void) { - struct amo *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; + struct amo *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO_SN2; /* our partition's amo variable */ return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) != 0; @@ -474,7 +511,7 @@ xpc_any_partition_engaged_sn2(void) static void xpc_assume_partition_disengaged_sn2(short partid) { - struct amo *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO; + struct amo *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO_SN2; /* clear bit(s) based on partid mask in our partition's amo */ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, @@ -599,12 +636,12 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) xp_max_npartitions); /* initialize the activate IRQ related amo variables */ - for (i = 0; i < xp_nasid_mask_words; i++) - (void)xpc_init_IRQ_amo_sn2(XPC_ACTIVATE_IRQ_AMOS + i); + for (i = 0; i < xpc_nasid_mask_words; i++) + (void)xpc_init_IRQ_amo_sn2(XPC_ACTIVATE_IRQ_AMOS_SN2 + i); /* initialize the engaged remote partitions related amo variables */ - (void)xpc_init_IRQ_amo_sn2(XPC_ENGAGED_PARTITIONS_AMO); - (void)xpc_init_IRQ_amo_sn2(XPC_DEACTIVATE_REQUEST_AMO); + (void)xpc_init_IRQ_amo_sn2(XPC_ENGAGED_PARTITIONS_AMO_SN2); + (void)xpc_init_IRQ_amo_sn2(XPC_DEACTIVATE_REQUEST_AMO_SN2); return xpSuccess; } @@ -657,7 +694,7 @@ xpc_check_remote_hb_sn2(void) short partid; enum xp_retval ret; - remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer; + remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2; for (partid = 0; partid < xp_max_npartitions; partid++) { @@ -749,7 +786,7 @@ xpc_request_partition_deactivation_sn2(struct xpc_partition *part) struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; unsigned long irq_flags; struct amo *amo = (struct amo *)__va(part_sn2->remote_amos_page_pa + - (XPC_DEACTIVATE_REQUEST_AMO * + (XPC_DEACTIVATE_REQUEST_AMO_SN2 * sizeof(struct amo))); local_irq_save(irq_flags); @@ -784,7 +821,7 @@ xpc_cancel_partition_deactivation_request_sn2(struct xpc_partition *part) { unsigned long irq_flags; struct amo *amo = (struct amo *)__va(part->sn.sn2.remote_amos_page_pa + - (XPC_DEACTIVATE_REQUEST_AMO * + (XPC_DEACTIVATE_REQUEST_AMO_SN2 * sizeof(struct amo))); local_irq_save(irq_flags); @@ -808,7 +845,7 @@ xpc_cancel_partition_deactivation_request_sn2(struct xpc_partition *part) static int xpc_partition_deactivation_requested_sn2(short partid) { - struct amo *amo = xpc_vars->amos_page + XPC_DEACTIVATE_REQUEST_AMO; + struct amo *amo = xpc_vars->amos_page + XPC_DEACTIVATE_REQUEST_AMO_SN2; /* our partition's amo variable ANDed with partid mask */ return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & @@ -898,7 +935,7 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) /* pull over the reserved page structure */ - remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer; + remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer_sn2; ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa); if (ret != xpSuccess) { @@ -917,7 +954,7 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) /* pull over the cross partition variables */ - remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer; + remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2; ret = xpc_get_remote_vars_sn2(remote_vars_pa, remote_vars); if (ret != xpSuccess) { @@ -996,10 +1033,10 @@ xpc_identify_activate_IRQ_sender_sn2(void) int n_IRQs_detected = 0; struct amo *act_amos; - act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS; + act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS_SN2; /* scan through act amo variable looking for non-zero entries */ - for (word = 0; word < xp_nasid_mask_words; word++) { + for (word = 0; word < xpc_nasid_mask_words; word++) { if (xpc_exiting) break; @@ -2334,6 +2371,7 @@ int xpc_init_sn2(void) { int ret; + size_t buf_size; xpc_rsvd_page_init = xpc_rsvd_page_init_sn2; xpc_increment_heartbeat = xpc_increment_heartbeat_sn2; @@ -2378,6 +2416,16 @@ xpc_init_sn2(void) xpc_send_msg = xpc_send_msg_sn2; xpc_received_msg = xpc_received_msg_sn2; + buf_size = max(XPC_RP_VARS_SIZE, + XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES_SN2); + xpc_remote_copy_buffer_sn2 = xpc_kmalloc_cacheline_aligned(buf_size, + GFP_KERNEL, + &xpc_remote_copy_buffer_base_sn2); + if (xpc_remote_copy_buffer_sn2 == NULL) { + dev_err(xpc_part, "can't get memory for remote copy buffer\n"); + return -ENOMEM; + } + /* open up protections for IPI and [potentially] amo operations */ xpc_allow_IPI_ops_sn2(); xpc_allow_amo_ops_shub_wars_1_1_sn2(); @@ -2394,6 +2442,7 @@ xpc_init_sn2(void) dev_err(xpc_part, "can't register ACTIVATE IRQ handler, " "errno=%d\n", -ret); xpc_disallow_IPI_ops_sn2(); + kfree(xpc_remote_copy_buffer_base_sn2); } return ret; } @@ -2403,4 +2452,5 @@ xpc_exit_sn2(void) { free_irq(SGI_XPC_ACTIVATE, NULL); xpc_disallow_IPI_ops_sn2(); + kfree(xpc_remote_copy_buffer_base_sn2); } -- GitLab From 8e85c23ef04fe0d8414e0b1dc04543095282a27a Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:13 -0700 Subject: [PATCH 0406/1024] sgi-xp: add _sn2 suffix to a few variables Add an '_sn2' suffix to some variables found in xpc_sn2.c. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc_sn2.c | 124 ++++++++++++++++++---------------- 1 file changed, 65 insertions(+), 59 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 9c0c29a2ac8..63fe59a5bfa 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -56,15 +56,15 @@ static char *xpc_remote_copy_buffer_sn2; static void *xpc_remote_copy_buffer_base_sn2; -static struct xpc_vars_sn2 *xpc_vars; /* >>> Add _sn2 suffix? */ -static struct xpc_vars_part_sn2 *xpc_vars_part; /* >>> Add _sn2 suffix? */ +static struct xpc_vars_sn2 *xpc_vars_sn2; +static struct xpc_vars_part_sn2 *xpc_vars_part_sn2; /* SH_IPI_ACCESS shub register value on startup */ -static u64 xpc_sh1_IPI_access; -static u64 xpc_sh2_IPI_access0; -static u64 xpc_sh2_IPI_access1; -static u64 xpc_sh2_IPI_access2; -static u64 xpc_sh2_IPI_access3; +static u64 xpc_sh1_IPI_access_sn2; +static u64 xpc_sh2_IPI_access0_sn2; +static u64 xpc_sh2_IPI_access1_sn2; +static u64 xpc_sh2_IPI_access2_sn2; +static u64 xpc_sh2_IPI_access3_sn2; /* * Change protections to allow IPI operations. @@ -77,13 +77,13 @@ xpc_allow_IPI_ops_sn2(void) /* >>> The following should get moved into SAL. */ if (is_shub2()) { - xpc_sh2_IPI_access0 = + xpc_sh2_IPI_access0_sn2 = (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0)); - xpc_sh2_IPI_access1 = + xpc_sh2_IPI_access1_sn2 = (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS1)); - xpc_sh2_IPI_access2 = + xpc_sh2_IPI_access2_sn2 = (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS2)); - xpc_sh2_IPI_access3 = + xpc_sh2_IPI_access3_sn2 = (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS3)); for_each_online_node(node) { @@ -98,7 +98,7 @@ xpc_allow_IPI_ops_sn2(void) -1UL); } } else { - xpc_sh1_IPI_access = + xpc_sh1_IPI_access_sn2 = (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH1_IPI_ACCESS)); for_each_online_node(node) { @@ -123,19 +123,19 @@ xpc_disallow_IPI_ops_sn2(void) for_each_online_node(node) { nasid = cnodeid_to_nasid(node); HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS0), - xpc_sh2_IPI_access0); + xpc_sh2_IPI_access0_sn2); HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS1), - xpc_sh2_IPI_access1); + xpc_sh2_IPI_access1_sn2); HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS2), - xpc_sh2_IPI_access2); + xpc_sh2_IPI_access2_sn2); HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH2_IPI_ACCESS3), - xpc_sh2_IPI_access3); + xpc_sh2_IPI_access3_sn2); } } else { for_each_online_node(node) { nasid = cnodeid_to_nasid(node); HUB_S((u64 *)GLOBAL_MMR_ADDR(nasid, SH1_IPI_ACCESS), - xpc_sh1_IPI_access); + xpc_sh1_IPI_access_sn2); } } } @@ -182,7 +182,7 @@ xpc_send_IRQ_sn2(struct amo *amo, u64 flag, int nasid, int phys_cpuid, static struct amo * xpc_init_IRQ_amo_sn2(int index) { - struct amo *amo = xpc_vars->amos_page + index; + struct amo *amo = xpc_vars_sn2->amos_page + index; (void)xpc_receive_IRQ_amo_sn2(amo); /* clear amo variable */ return amo; @@ -225,7 +225,7 @@ xpc_send_local_activate_IRQ_sn2(int from_nasid) { int w_index = XPC_NASID_W_INDEX(from_nasid); int b_index = XPC_NASID_B_INDEX(from_nasid); - struct amo *amos = (struct amo *)__va(xpc_vars->amos_page_pa + + struct amo *amos = (struct amo *)__va(xpc_vars_sn2->amos_page_pa + (XPC_ACTIVATE_IRQ_AMOS_SN2 * sizeof(struct amo))); @@ -492,7 +492,8 @@ xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part) static int xpc_partition_engaged_sn2(short partid) { - struct amo *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO_SN2; + struct amo *amo = xpc_vars_sn2->amos_page + + XPC_ENGAGED_PARTITIONS_AMO_SN2; /* our partition's amo variable ANDed with partid mask */ return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & @@ -502,7 +503,8 @@ xpc_partition_engaged_sn2(short partid) static int xpc_any_partition_engaged_sn2(void) { - struct amo *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO_SN2; + struct amo *amo = xpc_vars_sn2->amos_page + + XPC_ENGAGED_PARTITIONS_AMO_SN2; /* our partition's amo variable */ return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) != 0; @@ -511,7 +513,8 @@ xpc_any_partition_engaged_sn2(void) static void xpc_assume_partition_disengaged_sn2(short partid) { - struct amo *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO_SN2; + struct amo *amo = xpc_vars_sn2->amos_page + + XPC_ENGAGED_PARTITIONS_AMO_SN2; /* clear bit(s) based on partid mask in our partition's amo */ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, @@ -580,27 +583,27 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) int i; int ret; - xpc_vars = XPC_RP_VARS(rp); + xpc_vars_sn2 = XPC_RP_VARS(rp); - rp->sn.vars_pa = __pa(xpc_vars); + rp->sn.vars_pa = __pa(xpc_vars_sn2); /* vars_part array follows immediately after vars */ - xpc_vars_part = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) + - XPC_RP_VARS_SIZE); + xpc_vars_part_sn2 = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) + + XPC_RP_VARS_SIZE); /* - * Before clearing xpc_vars, see if a page of amos had been previously - * allocated. If not we'll need to allocate one and set permissions - * so that cross-partition amos are allowed. + * Before clearing xpc_vars_sn2, see if a page of amos had been + * previously allocated. If not we'll need to allocate one and set + * permissions so that cross-partition amos are allowed. * * The allocated amo page needs MCA reporting to remain disabled after * XPC has unloaded. To make this work, we keep a copy of the pointer - * to this page (i.e., amos_page) in the struct xpc_vars structure, + * to this page (i.e., amos_page) in the struct xpc_vars_sn2 structure, * which is pointed to by the reserved page, and re-use that saved copy * on subsequent loads of XPC. This amo page is never freed, and its * memory protections are never restricted. */ - amos_page = xpc_vars->amos_page; + amos_page = xpc_vars_sn2->amos_page; if (amos_page == NULL) { amos_page = (struct amo *)TO_AMO(uncached_alloc_page(0, 1)); if (amos_page == NULL) { @@ -621,18 +624,18 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) } } - /* clear xpc_vars */ - memset(xpc_vars, 0, sizeof(struct xpc_vars_sn2)); + /* clear xpc_vars_sn2 */ + memset(xpc_vars_sn2, 0, sizeof(struct xpc_vars_sn2)); - xpc_vars->version = XPC_V_VERSION; - xpc_vars->activate_IRQ_nasid = cpuid_to_nasid(0); - xpc_vars->activate_IRQ_phys_cpuid = cpu_physical_id(0); - xpc_vars->vars_part_pa = __pa(xpc_vars_part); - xpc_vars->amos_page_pa = ia64_tpa((u64)amos_page); - xpc_vars->amos_page = amos_page; /* save for next load of XPC */ + xpc_vars_sn2->version = XPC_V_VERSION; + xpc_vars_sn2->activate_IRQ_nasid = cpuid_to_nasid(0); + xpc_vars_sn2->activate_IRQ_phys_cpuid = cpu_physical_id(0); + xpc_vars_sn2->vars_part_pa = __pa(xpc_vars_part_sn2); + xpc_vars_sn2->amos_page_pa = ia64_tpa((u64)amos_page); + xpc_vars_sn2->amos_page = amos_page; /* save for next load of XPC */ - /* clear xpc_vars_part */ - memset((u64 *)xpc_vars_part, 0, sizeof(struct xpc_vars_part_sn2) * + /* clear xpc_vars_part_sn2 */ + memset((u64 *)xpc_vars_part_sn2, 0, sizeof(struct xpc_vars_part_sn2) * xp_max_npartitions); /* initialize the activate IRQ related amo variables */ @@ -649,30 +652,30 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) static void xpc_increment_heartbeat_sn2(void) { - xpc_vars->heartbeat++; + xpc_vars_sn2->heartbeat++; } static void xpc_offline_heartbeat_sn2(void) { xpc_increment_heartbeat_sn2(); - xpc_vars->heartbeat_offline = 1; + xpc_vars_sn2->heartbeat_offline = 1; } static void xpc_online_heartbeat_sn2(void) { xpc_increment_heartbeat_sn2(); - xpc_vars->heartbeat_offline = 0; + xpc_vars_sn2->heartbeat_offline = 0; } static void xpc_heartbeat_init_sn2(void) { - DBUG_ON(xpc_vars == NULL); + DBUG_ON(xpc_vars_sn2 == NULL); - bitmap_zero(xpc_vars->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2); - xpc_heartbeating_to_mask = &xpc_vars->heartbeating_to_mask[0]; + bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2); + xpc_heartbeating_to_mask = &xpc_vars_sn2->heartbeating_to_mask[0]; xpc_online_heartbeat_sn2(); } @@ -845,7 +848,8 @@ xpc_cancel_partition_deactivation_request_sn2(struct xpc_partition *part) static int xpc_partition_deactivation_requested_sn2(short partid) { - struct amo *amo = xpc_vars->amos_page + XPC_DEACTIVATE_REQUEST_AMO_SN2; + struct amo *amo = xpc_vars_sn2->amos_page + + XPC_DEACTIVATE_REQUEST_AMO_SN2; /* our partition's amo variable ANDed with partid mask */ return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & @@ -1033,7 +1037,7 @@ xpc_identify_activate_IRQ_sender_sn2(void) int n_IRQs_detected = 0; struct amo *act_amos; - act_amos = xpc_vars->amos_page + XPC_ACTIVATE_IRQ_AMOS_SN2; + act_amos = xpc_vars_sn2->amos_page + XPC_ACTIVATE_IRQ_AMOS_SN2; /* scan through act amo variable looking for non-zero entries */ for (word = 0; word < xpc_nasid_mask_words; word++) { @@ -1261,15 +1265,17 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) * The setting of the magic # indicates that these per partition * specific variables are ready to be used. */ - xpc_vars_part[partid].GPs_pa = __pa(part_sn2->local_GPs); - xpc_vars_part[partid].openclose_args_pa = + xpc_vars_part_sn2[partid].GPs_pa = __pa(part_sn2->local_GPs); + xpc_vars_part_sn2[partid].openclose_args_pa = __pa(part->local_openclose_args); - xpc_vars_part[partid].chctl_amo_pa = __pa(part_sn2->local_chctl_amo_va); + xpc_vars_part_sn2[partid].chctl_amo_pa = + __pa(part_sn2->local_chctl_amo_va); cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */ - xpc_vars_part[partid].notify_IRQ_nasid = cpuid_to_nasid(cpuid); - xpc_vars_part[partid].notify_IRQ_phys_cpuid = cpu_physical_id(cpuid); - xpc_vars_part[partid].nchannels = part->nchannels; - xpc_vars_part[partid].magic = XPC_VP_MAGIC1; + xpc_vars_part_sn2[partid].notify_IRQ_nasid = cpuid_to_nasid(cpuid); + xpc_vars_part_sn2[partid].notify_IRQ_phys_cpuid = + cpu_physical_id(cpuid); + xpc_vars_part_sn2[partid].nchannels = part->nchannels; + xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC1; return xpSuccess; @@ -1316,7 +1322,7 @@ xpc_teardown_infrastructure_sn2(struct xpc_partition *part) DBUG_ON(part->setup_state != XPC_P_SETUP); part->setup_state = XPC_P_WTEARDOWN; - xpc_vars_part[partid].magic = 0; + xpc_vars_part_sn2[partid].magic = 0; free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid); @@ -1432,7 +1438,7 @@ xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) return xpRetry; } - if (xpc_vars_part[partid].magic == XPC_VP_MAGIC1) { + if (xpc_vars_part_sn2[partid].magic == XPC_VP_MAGIC1) { /* validate the variables */ @@ -1462,7 +1468,7 @@ xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) /* let the other side know that we've pulled their variables */ - xpc_vars_part[partid].magic = XPC_VP_MAGIC2; + xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC2; } if (pulled_entry->magic == XPC_VP_MAGIC1) -- GitLab From ea57f80c8c0e59cfc5095f7e856ce7c8e6ac2984 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:14 -0700 Subject: [PATCH 0407/1024] sgi-xp: eliminate '>>>' in comments Comments in /drivers/misc/sgi-xp has been using '>>>' as a means to draw attention to something that needs to be done or considered. To avoid colliding with git rejects, '>>>' will now be replaced by '!!!' to indicate something to do, and by '???' to indicate something to be considered. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xp.h | 11 +++------- drivers/misc/sgi-xp/xp_sn2.c | 10 ++++----- drivers/misc/sgi-xp/xp_uv.c | 2 +- drivers/misc/sgi-xp/xpc.h | 14 ++++++++----- drivers/misc/sgi-xp/xpc_channel.c | 2 +- drivers/misc/sgi-xp/xpc_partition.c | 2 +- drivers/misc/sgi-xp/xpc_sn2.c | 8 ++++---- drivers/misc/sgi-xp/xpc_uv.c | 32 ++++++++++++++--------------- drivers/misc/sgi-xp/xpnet.c | 6 +++--- 9 files changed, 43 insertions(+), 44 deletions(-) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 955b5b91323..0ca81f16646 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -21,7 +21,7 @@ #include #endif -/* >>> Add this #define to some linux header file some day. */ +/* ??? Add this #define to some linux header file some day? */ #define BYTES_PER_WORD sizeof(void *) #ifdef USE_DBUG_ON @@ -65,18 +65,13 @@ * other partition that is currently up. Over these channels, kernel-level * `users' can communicate with their counterparts on the other partitions. * ->>> The following described limitation of a max of eight channels possible ->>> pertains only to ia64-sn2. THIS ISN'T TRUE SINCE I'M PLANNING TO JUST ->>> TIE INTO THE EXISTING MECHANISM ONCE THE CHANNEL MESSAGES ARE RECEIVED. ->>> THE 128-BYTE CACHELINE PERFORMANCE ISSUE IS TIED TO IA64-SN2. - * * If the need for additional channels arises, one can simply increase * XPC_MAX_NCHANNELS accordingly. If the day should come where that number * exceeds the absolute MAXIMUM number of channels possible (eight), then one * will need to make changes to the XPC code to accommodate for this. * - * The absolute maximum number of channels possible is currently limited to - * eight for performance reasons. The internal cross partition structures + * The absolute maximum number of channels possible is limited to eight for + * performance reasons on sn2 hardware. The internal cross partition structures * require sixteen bytes per channel, and eight allows all of this * interface-shared info to fit in one 128-byte cacheline. */ diff --git a/drivers/misc/sgi-xp/xp_sn2.c b/drivers/misc/sgi-xp/xp_sn2.c index 1fcfdebca2c..baabc1cb3fe 100644 --- a/drivers/misc/sgi-xp/xp_sn2.c +++ b/drivers/misc/sgi-xp/xp_sn2.c @@ -87,11 +87,11 @@ xp_remote_memcpy_sn2(void *vdst, const void *psrc, size_t len) { bte_result_t ret; u64 pdst = ia64_tpa(vdst); - /* >>> What are the rules governing the src and dst addresses passed in? - * >>> Currently we're assuming that dst is a virtual address and src - * >>> is a physical address, is this appropriate? Can we allow them to - * >>> be whatever and we make the change here without damaging the - * >>> addresses? + /* ??? What are the rules governing the src and dst addresses passed in? + * ??? Currently we're assuming that dst is a virtual address and src + * ??? is a physical address, is this appropriate? Can we allow them to + * ??? be whatever and we make the change here without damaging the + * ??? addresses? */ /* diff --git a/drivers/misc/sgi-xp/xp_uv.c b/drivers/misc/sgi-xp/xp_uv.c index dca519fdef9..382b1b6bcc0 100644 --- a/drivers/misc/sgi-xp/xp_uv.c +++ b/drivers/misc/sgi-xp/xp_uv.c @@ -18,7 +18,7 @@ static enum xp_retval xp_remote_memcpy_uv(void *vdst, const void *psrc, size_t len) { - /* >>> this function needs fleshing out */ + /* !!! this function needs fleshing out */ return xpUnsupported; } diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 2111723553b..0f516c3e3e6 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -276,9 +276,12 @@ struct xpc_notify { * There is an array of these structures for each remote partition. It is * allocated at the time a partition becomes active. The array contains one * of these structures for each potential channel connection to that partition. + */ + +/* + * The following is sn2 only. * ->>> sn2 only!!! - * Each of these structures manages two message queues (circular buffers). + * Each channel structure manages two message queues (circular buffers). * They are allocated at the time a channel connection is made. One of * these message queues (local_msgqueue) holds the locally created messages * that are destined for the remote partition. The other of these message @@ -345,6 +348,7 @@ struct xpc_notify { * new messages, by the clearing of the message flags of the acknowledged * messages. */ + struct xpc_channel_sn2 { /* various flavors of local and remote Get/Put values */ @@ -359,7 +363,7 @@ struct xpc_channel_sn2 { }; struct xpc_channel_uv { - /* >>> code is coming */ + /* !!! code is coming */ }; struct xpc_channel { @@ -500,7 +504,7 @@ xpc_any_msg_chctl_flags_set(union xpc_channel_ctl_flags *chctl) } /* - * Manages channels on a partition basis. There is one of these structures + * Manage channels on a partition basis. There is one of these structures * for each partition (a partition will never utilize the structure that * represents itself). */ @@ -535,7 +539,7 @@ struct xpc_partition_sn2 { }; struct xpc_partition_uv { - /* >>> code is coming */ + /* !!! code is coming */ }; struct xpc_partition { diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 1c73423665b..f1afc0a7c33 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -129,7 +129,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) /* wake those waiting for notify completion */ if (atomic_read(&ch->n_to_notify) > 0) { - /* >>> we do callout while holding ch->lock */ + /* we do callout while holding ch->lock, callout can't block */ xpc_notify_senders_of_disconnect(ch); } diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index 9f104450478..73a92957b80 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -91,7 +91,7 @@ xpc_get_rsvd_page_pa(int nasid) if (status != SALRET_MORE_PASSES) break; - /* >>> L1_CACHE_ALIGN() is only a sn2-bte_copy requirement */ + /* !!! L1_CACHE_ALIGN() is only a sn2-bte_copy requirement */ if (L1_CACHE_ALIGN(len) > buf_len) { kfree(buf_base); buf_len = L1_CACHE_ALIGN(len); diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 63fe59a5bfa..e42c3038203 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -75,7 +75,7 @@ xpc_allow_IPI_ops_sn2(void) int node; int nasid; - /* >>> The following should get moved into SAL. */ + /* !!! The following should get moved into SAL. */ if (is_shub2()) { xpc_sh2_IPI_access0_sn2 = (u64)HUB_L((u64 *)LOCAL_MMR_ADDR(SH2_IPI_ACCESS0)); @@ -118,7 +118,7 @@ xpc_disallow_IPI_ops_sn2(void) int node; int nasid; - /* >>> The following should get moved into SAL. */ + /* !!! The following should get moved into SAL. */ if (is_shub2()) { for_each_online_node(node) { nasid = cnodeid_to_nasid(node); @@ -1360,7 +1360,7 @@ xpc_teardown_infrastructure_sn2(struct xpc_partition *part) * dst must be a cacheline aligned virtual address on this partition. * cnt must be cacheline sized */ -/* >>> Replace this function by call to xp_remote_memcpy() or bte_copy()? */ +/* ??? Replace this function by call to xp_remote_memcpy() or bte_copy()? */ static enum xp_retval xpc_pull_remote_cachelines_sn2(struct xpc_partition *part, void *dst, const void *src, size_t cnt) @@ -2242,7 +2242,7 @@ xpc_send_msg_sn2(struct xpc_channel *ch, u32 flags, void *payload, notify->key = key; notify->type = notify_type; - /* >>> is a mb() needed here? */ + /* ??? Is a mb() needed here? */ if (ch->flags & XPC_C_DISCONNECTING) { /* diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 1401b0f45dc..2aec1dfbb3d 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -15,8 +15,8 @@ #include -/* >>> #include */ -/* >>> uv_gpa() is defined in */ +/* !!! #include */ +/* !!! uv_gpa() is defined in */ #define uv_gpa(_a) ((unsigned long)_a) #include "xpc.h" @@ -29,16 +29,16 @@ static void xpc_send_local_activate_IRQ_uv(struct xpc_partition *part) { /* - * >>> make our side think that the remote parition sent an activate - * >>> message our way. Also do what the activate IRQ handler would - * >>> do had one really been sent. + * !!! Make our side think that the remote parition sent an activate + * !!! message our way. Also do what the activate IRQ handler would + * !!! do had one really been sent. */ } static enum xp_retval xpc_rsvd_page_init_uv(struct xpc_rsvd_page *rp) { - /* >>> need to have established xpc_activate_mq earlier */ + /* !!! need to have established xpc_activate_mq earlier */ rp->sn.activate_mq_gpa = uv_gpa(xpc_activate_mq); return xpSuccess; } @@ -46,7 +46,7 @@ xpc_rsvd_page_init_uv(struct xpc_rsvd_page *rp) static void xpc_increment_heartbeat_uv(void) { - /* >>> send heartbeat msg to xpc_heartbeating_to_mask partids */ + /* !!! send heartbeat msg to xpc_heartbeating_to_mask partids */ } static void @@ -59,7 +59,7 @@ xpc_heartbeat_init_uv(void) static void xpc_heartbeat_exit_uv(void) { - /* >>> send heartbeat_offline msg to xpc_heartbeating_to_mask partids */ + /* !!! send heartbeat_offline msg to xpc_heartbeating_to_mask partids */ } static void @@ -70,9 +70,9 @@ xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp, struct xpc_partition *part = &xpc_partitions[partid]; /* - * >>> setup part structure with the bits of info we can glean from the rp - * >>> part->remote_rp_pa = remote_rp_pa; - * >>> part->sn.uv.activate_mq_gpa = remote_rp->sn.activate_mq_gpa; + * !!! Setup part structure with the bits of info we can glean from the rp: + * !!! part->remote_rp_pa = remote_rp_pa; + * !!! part->sn.uv.activate_mq_gpa = remote_rp->sn.activate_mq_gpa; */ xpc_send_local_activate_IRQ_uv(part); @@ -91,7 +91,7 @@ xpc_request_partition_reactivation_uv(struct xpc_partition *part) static enum xp_retval xpc_setup_infrastructure_uv(struct xpc_partition *part) { - /* >>> this function needs fleshing out */ + /* !!! this function needs fleshing out */ return xpUnsupported; } @@ -102,28 +102,28 @@ xpc_setup_infrastructure_uv(struct xpc_partition *part) static void xpc_teardown_infrastructure_uv(struct xpc_partition *part) { - /* >>> this function needs fleshing out */ + /* !!! this function needs fleshing out */ return; } static enum xp_retval xpc_make_first_contact_uv(struct xpc_partition *part) { - /* >>> this function needs fleshing out */ + /* !!! this function needs fleshing out */ return xpUnsupported; } static u64 xpc_get_chctl_all_flags_uv(struct xpc_partition *part) { - /* >>> this function needs fleshing out */ + /* !!! this function needs fleshing out */ return 0UL; } static struct xpc_msg * xpc_get_deliverable_msg_uv(struct xpc_channel *ch) { - /* >>> this function needs fleshing out */ + /* !!! this function needs fleshing out */ return NULL; } diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index c5f59a6dae5..07c89c4e2c2 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -229,9 +229,9 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg) if (ret != xpSuccess) { /* - * >>> Need better way of cleaning skb. Currently skb - * >>> appears in_use and we can't just call - * >>> dev_kfree_skb. + * !!! Need better way of cleaning skb. Currently skb + * !!! appears in_use and we can't just call + * !!! dev_kfree_skb. */ dev_err(xpnet, "xp_remote_memcpy(0x%p, 0x%p, 0x%hx) " "returned error=0x%x\n", (void *) -- GitLab From 04de741885bc7565a28150e82c56a56e544440e6 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:14 -0700 Subject: [PATCH 0408/1024] sgi-xp: use standard bitops macros and functions Change sgi-xp to use the standard bitops macros and functions instead of trying to invent its own mechanism. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xp.h | 3 -- drivers/misc/sgi-xp/xpc.h | 43 ++++++----------- drivers/misc/sgi-xp/xpc_partition.c | 43 ++++++++--------- drivers/misc/sgi-xp/xpc_sn2.c | 73 +++++++++++++++-------------- 4 files changed, 76 insertions(+), 86 deletions(-) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 0ca81f16646..3054fae8b02 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -21,9 +21,6 @@ #include #endif -/* ??? Add this #define to some linux header file some day? */ -#define BYTES_PER_WORD sizeof(void *) - #ifdef USE_DBUG_ON #define DBUG_ON(condition) BUG_ON(condition) #else diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 0f516c3e3e6..0907934cdd8 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -35,23 +35,7 @@ #define XPC_VERSION_MAJOR(_v) ((_v) >> 4) #define XPC_VERSION_MINOR(_v) ((_v) & 0xf) -/* - * The next macros define word or bit representations for given - * C-brick nasid in either the SAL provided bit array representing - * nasids in the partition/machine or the array of amo structures used - * for inter-partition initiation communications. - * - * For SN2 machines, C-Bricks are alway even numbered NASIDs. As - * such, some space will be saved by insisting that nasid information - * passed from SAL always be packed for C-Bricks and the - * cross-partition interrupts use the same packing scheme. - */ -#define XPC_NASID_W_INDEX(_n) (((_n) / 64) / 2) -#define XPC_NASID_B_INDEX(_n) (((_n) / 2) & (64 - 1)) -#define XPC_NASID_IN_ARRAY(_n, _p) ((_p)[XPC_NASID_W_INDEX(_n)] & \ - (1UL << XPC_NASID_B_INDEX(_n))) -#define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2) - +/* define frequency of the heartbeat and frequency how often it's checked */ #define XPC_HB_DEFAULT_INTERVAL 5 /* incr HB every x secs */ #define XPC_HB_CHECK_DEFAULT_INTERVAL 20 /* check HB every x secs */ @@ -86,11 +70,13 @@ * the actual nasids in the entire machine (mach_nasids). We're only * interested in the even numbered nasids (which contain the processors * and/or memory), so we only need half as many bits to represent the - * nasids. The part_nasids mask is located starting at the first cacheline - * following the reserved page header. The mach_nasids mask follows right - * after the part_nasids mask. The size in bytes of each mask is reflected - * by the reserved page header field 'SAL_nasids_size'. (Local partition's - * mask pointers are xpc_part_nasids and xpc_mach_nasids.) + * nasids. When mapping nasid to bit in a mask (or bit to nasid) be sure + * to either divide or multiply by 2. The part_nasids mask is located + * starting at the first cacheline following the reserved page header. The + * mach_nasids mask follows right after the part_nasids mask. The size in + * bytes of each mask is reflected by the reserved page header field + * 'SAL_nasids_size'. (Local partition's mask pointers are xpc_part_nasids + * and xpc_mach_nasids.) * * vars (ia64-sn2 only) * vars part (ia64-sn2 only) @@ -194,10 +180,11 @@ struct xpc_vars_part_sn2 { #define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars_sn2)) #define XPC_RP_PART_NASIDS(_rp) ((u64 *)((u8 *)(_rp) + XPC_RP_HEADER_SIZE)) -#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xpc_nasid_mask_words) +#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + \ + xpc_nasid_mask_nlongs) #define XPC_RP_VARS(_rp) ((struct xpc_vars_sn2 *) \ (XPC_RP_MACH_NASIDS(_rp) + \ - xpc_nasid_mask_words)) + xpc_nasid_mask_nlongs)) /* * Functions registered by add_timer() or called by kernel_thread() only @@ -695,9 +682,9 @@ extern void xpc_exit_uv(void); /* found in xpc_partition.c */ extern int xpc_exiting; -extern int xpc_nasid_mask_words; +extern int xpc_nasid_mask_nlongs; extern struct xpc_rsvd_page *xpc_rsvd_page; -extern u64 *xpc_mach_nasids; +extern unsigned long *xpc_mach_nasids; extern struct xpc_partition *xpc_partitions; extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **); extern struct xpc_rsvd_page *xpc_setup_rsvd_page(void); @@ -706,8 +693,8 @@ extern int xpc_partition_disengaged(struct xpc_partition *); extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *); extern void xpc_mark_partition_inactive(struct xpc_partition *); extern void xpc_discovery(void); -extern enum xp_retval xpc_get_remote_rp(int, u64 *, struct xpc_rsvd_page *, - u64 *); +extern enum xp_retval xpc_get_remote_rp(int, unsigned long *, + struct xpc_rsvd_page *, u64 *); extern void xpc_deactivate_partition(const int, struct xpc_partition *, enum xp_retval); extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *); diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index 73a92957b80..ca6784f5597 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -31,11 +31,11 @@ int xpc_exiting; /* this partition's reserved page pointers */ struct xpc_rsvd_page *xpc_rsvd_page; -static u64 *xpc_part_nasids; -u64 *xpc_mach_nasids; +static unsigned long *xpc_part_nasids; +unsigned long *xpc_mach_nasids; -static int xpc_sizeof_nasid_mask; /* actual size in bytes of nasid mask */ -int xpc_nasid_mask_words; /* actual size in words of nasid mask */ +static int xpc_nasid_mask_nbytes; /* #of bytes in nasid mask */ +int xpc_nasid_mask_nlongs; /* #of longs in nasid mask */ struct xpc_partition *xpc_partitions; @@ -167,9 +167,9 @@ xpc_setup_rsvd_page(void) /* SAL_version 1 didn't set the nasids_size field */ rp->SAL_nasids_size = 128; } - xpc_sizeof_nasid_mask = rp->SAL_nasids_size; - xpc_nasid_mask_words = DIV_ROUND_UP(xpc_sizeof_nasid_mask, - BYTES_PER_WORD); + xpc_nasid_mask_nbytes = rp->SAL_nasids_size; + xpc_nasid_mask_nlongs = BITS_TO_LONGS(rp->SAL_nasids_size * + BITS_PER_BYTE); /* setup the pointers to the various items in the reserved page */ xpc_part_nasids = XPC_RP_PART_NASIDS(rp); @@ -199,10 +199,10 @@ xpc_setup_rsvd_page(void) * part_nasids mask. */ enum xp_retval -xpc_get_remote_rp(int nasid, u64 *discovered_nasids, +xpc_get_remote_rp(int nasid, unsigned long *discovered_nasids, struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa) { - int i; + int l; enum xp_retval ret; /* get the reserved page's physical address */ @@ -213,15 +213,16 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids, /* pull over the reserved page header and part_nasids mask */ ret = xp_remote_memcpy(remote_rp, (void *)*remote_rp_pa, - XPC_RP_HEADER_SIZE + xpc_sizeof_nasid_mask); + XPC_RP_HEADER_SIZE + xpc_nasid_mask_nbytes); if (ret != xpSuccess) return ret; if (discovered_nasids != NULL) { - u64 *remote_part_nasids = XPC_RP_PART_NASIDS(remote_rp); + unsigned long *remote_part_nasids = + XPC_RP_PART_NASIDS(remote_rp); - for (i = 0; i < xpc_nasid_mask_words; i++) - discovered_nasids[i] |= remote_part_nasids[i]; + for (l = 0; l < xpc_nasid_mask_nlongs; l++) + discovered_nasids[l] |= remote_part_nasids[l]; } /* see if the reserved page has been set up by XPC */ @@ -401,16 +402,16 @@ xpc_discovery(void) int max_regions; int nasid; struct xpc_rsvd_page *rp; - u64 *discovered_nasids; + unsigned long *discovered_nasids; enum xp_retval ret; remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE + - xpc_sizeof_nasid_mask, + xpc_nasid_mask_nbytes, GFP_KERNEL, &remote_rp_base); if (remote_rp == NULL) return; - discovered_nasids = kzalloc(sizeof(u64) * xpc_nasid_mask_words, + discovered_nasids = kzalloc(sizeof(long) * xpc_nasid_mask_nlongs, GFP_KERNEL); if (discovered_nasids == NULL) { kfree(remote_rp_base); @@ -453,21 +454,21 @@ xpc_discovery(void) dev_dbg(xpc_part, "checking nasid %d\n", nasid); - if (XPC_NASID_IN_ARRAY(nasid, xpc_part_nasids)) { + if (test_bit(nasid / 2, xpc_part_nasids)) { dev_dbg(xpc_part, "PROM indicates Nasid %d is " "part of the local partition; skipping " "region\n", nasid); break; } - if (!(XPC_NASID_IN_ARRAY(nasid, xpc_mach_nasids))) { + if (!(test_bit(nasid / 2, xpc_mach_nasids))) { dev_dbg(xpc_part, "PROM indicates Nasid %d was " "not on Numa-Link network at reset\n", nasid); continue; } - if (XPC_NASID_IN_ARRAY(nasid, discovered_nasids)) { + if (test_bit(nasid / 2, discovered_nasids)) { dev_dbg(xpc_part, "Nasid %d is part of a " "partition which was previously " "discovered\n", nasid); @@ -512,10 +513,10 @@ xpc_initiate_partid_to_nasids(short partid, void *nasid_mask) if (part->remote_rp_pa == 0) return xpPartitionDown; - memset(nasid_mask, 0, xpc_sizeof_nasid_mask); + memset(nasid_mask, 0, xpc_nasid_mask_nbytes); part_nasid_pa = (u64)XPC_RP_PART_NASIDS(part->remote_rp_pa); return xp_remote_memcpy(nasid_mask, (void *)part_nasid_pa, - xpc_sizeof_nasid_mask); + xpc_nasid_mask_nbytes); } diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index e42c3038203..f82889f6015 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -210,28 +210,26 @@ static void xpc_send_activate_IRQ_sn2(u64 amos_page_pa, int from_nasid, int to_nasid, int to_phys_cpuid) { - int w_index = XPC_NASID_W_INDEX(from_nasid); - int b_index = XPC_NASID_B_INDEX(from_nasid); struct amo *amos = (struct amo *)__va(amos_page_pa + (XPC_ACTIVATE_IRQ_AMOS_SN2 * sizeof(struct amo))); - (void)xpc_send_IRQ_sn2(&amos[w_index], (1UL << b_index), to_nasid, + (void)xpc_send_IRQ_sn2(&amos[BIT_WORD(from_nasid / 2)], + BIT_MASK(from_nasid / 2), to_nasid, to_phys_cpuid, SGI_XPC_ACTIVATE); } static void xpc_send_local_activate_IRQ_sn2(int from_nasid) { - int w_index = XPC_NASID_W_INDEX(from_nasid); - int b_index = XPC_NASID_B_INDEX(from_nasid); struct amo *amos = (struct amo *)__va(xpc_vars_sn2->amos_page_pa + (XPC_ACTIVATE_IRQ_AMOS_SN2 * sizeof(struct amo))); /* fake the sending and receipt of an activate IRQ from remote nasid */ - FETCHOP_STORE_OP(TO_AMO((u64)&amos[w_index].variable), FETCHOP_OR, - (1UL << b_index)); + FETCHOP_STORE_OP(TO_AMO((u64)&amos[BIT_WORD(from_nasid / 2)].variable), + FETCHOP_OR, BIT_MASK(from_nasid / 2)); + atomic_inc(&xpc_activate_IRQ_rcvd); wake_up_interruptible(&xpc_activate_IRQ_wq); } @@ -439,7 +437,8 @@ xpc_indicate_partition_engaged_sn2(struct xpc_partition *part) /* set bit corresponding to our partid in remote partition's amo */ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, - (1UL << sn_partition_id)); + BIT(sn_partition_id)); + /* * We must always use the nofault function regardless of whether we * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we @@ -466,7 +465,8 @@ xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part) /* clear bit corresponding to our partid in remote partition's amo */ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~(1UL << sn_partition_id)); + ~BIT(sn_partition_id)); + /* * We must always use the nofault function regardless of whether we * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we @@ -497,7 +497,7 @@ xpc_partition_engaged_sn2(short partid) /* our partition's amo variable ANDed with partid mask */ return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & - (1UL << partid)) != 0; + BIT(partid)) != 0; } static int @@ -518,7 +518,7 @@ xpc_assume_partition_disengaged_sn2(short partid) /* clear bit(s) based on partid mask in our partition's amo */ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~(1UL << partid)); + ~BIT(partid)); } /* original protection values for each node */ @@ -639,7 +639,7 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) xp_max_npartitions); /* initialize the activate IRQ related amo variables */ - for (i = 0; i < xpc_nasid_mask_words; i++) + for (i = 0; i < xpc_nasid_mask_nlongs; i++) (void)xpc_init_IRQ_amo_sn2(XPC_ACTIVATE_IRQ_AMOS_SN2 + i); /* initialize the engaged remote partitions related amo variables */ @@ -796,7 +796,8 @@ xpc_request_partition_deactivation_sn2(struct xpc_partition *part) /* set bit corresponding to our partid in remote partition's amo */ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_OR, - (1UL << sn_partition_id)); + BIT(sn_partition_id)); + /* * We must always use the nofault function regardless of whether we * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we @@ -831,7 +832,8 @@ xpc_cancel_partition_deactivation_request_sn2(struct xpc_partition *part) /* clear bit corresponding to our partid in remote partition's amo */ FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~(1UL << sn_partition_id)); + ~BIT(sn_partition_id)); + /* * We must always use the nofault function regardless of whether we * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we @@ -853,7 +855,7 @@ xpc_partition_deactivation_requested_sn2(short partid) /* our partition's amo variable ANDed with partid mask */ return (FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) & - (1UL << partid)) != 0; + BIT(partid)) != 0; } /* @@ -1031,28 +1033,31 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) int xpc_identify_activate_IRQ_sender_sn2(void) { - int word, bit; - u64 nasid_mask; + int l; + int b; + unsigned long nasid_mask_long; u64 nasid; /* remote nasid */ int n_IRQs_detected = 0; struct amo *act_amos; act_amos = xpc_vars_sn2->amos_page + XPC_ACTIVATE_IRQ_AMOS_SN2; - /* scan through act amo variable looking for non-zero entries */ - for (word = 0; word < xpc_nasid_mask_words; word++) { + /* scan through activate amo variables looking for non-zero entries */ + for (l = 0; l < xpc_nasid_mask_nlongs; l++) { if (xpc_exiting) break; - nasid_mask = xpc_receive_IRQ_amo_sn2(&act_amos[word]); - if (nasid_mask == 0) { - /* no IRQs from nasids in this variable */ + nasid_mask_long = xpc_receive_IRQ_amo_sn2(&act_amos[l]); + + b = find_first_bit(&nasid_mask_long, BITS_PER_LONG); + if (b >= BITS_PER_LONG) { + /* no IRQs from nasids in this amo variable */ continue; } - dev_dbg(xpc_part, "amo[%d] gave back 0x%lx\n", word, - nasid_mask); + dev_dbg(xpc_part, "amo[%d] gave back 0x%lx\n", l, + nasid_mask_long); /* * If this nasid has been added to the machine since @@ -1060,19 +1065,19 @@ xpc_identify_activate_IRQ_sender_sn2(void) * remote nasid in our reserved pages machine mask. * This is used in the event of module reload. */ - xpc_mach_nasids[word] |= nasid_mask; + xpc_mach_nasids[l] |= nasid_mask_long; /* locate the nasid(s) which sent interrupts */ - for (bit = 0; bit < (8 * sizeof(u64)); bit++) { - if (nasid_mask & (1UL << bit)) { - n_IRQs_detected++; - nasid = XPC_NASID_FROM_W_B(word, bit); - dev_dbg(xpc_part, "interrupt from nasid %ld\n", - nasid); - xpc_identify_activate_IRQ_req_sn2(nasid); - } - } + do { + n_IRQs_detected++; + nasid = (l * BITS_PER_LONG + b) * 2; + dev_dbg(xpc_part, "interrupt from nasid %ld\n", nasid); + xpc_identify_activate_IRQ_req_sn2(nasid); + + b = find_next_bit(&nasid_mask_long, BITS_PER_LONG, + b + 1); + } while (b < BITS_PER_LONG); } return n_IRQs_detected; } -- GitLab From 81fe7883d2c8a80a7145ad22f8cd8514d05412b9 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:15 -0700 Subject: [PATCH 0409/1024] sgi-xp: add 'jiffies' to reserved page's timestamp name Rename XPC's reserved page's timestamp member to reflect the units of time involved. Signed-off-by: Dean Nelson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc.h | 6 +++--- drivers/misc/sgi-xp/xpc_main.c | 8 ++++---- drivers/misc/sgi-xp/xpc_partition.c | 14 +++++++------- drivers/misc/sgi-xp/xpc_sn2.c | 26 ++++++++++++++------------ 4 files changed, 28 insertions(+), 26 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 0907934cdd8..e194d3140f6 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -87,7 +87,7 @@ * which are partition specific (vars part). These are setup by XPC. * (Local partition's vars pointers are xpc_vars and xpc_vars_part.) * - * Note: Until 'stamp' is set non-zero, the partition XPC code has not been + * Note: Until 'ts_jiffies' is set non-zero, the partition XPC code has not been * initialized. */ struct xpc_rsvd_page { @@ -101,7 +101,7 @@ struct xpc_rsvd_page { u64 vars_pa; /* physical address of struct xpc_vars */ u64 activate_mq_gpa; /* global phys address of activate_mq */ } sn; - unsigned long stamp; /* time when reserved page was setup by XPC */ + unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */ u64 pad2[10]; /* align to last u64 in 2nd 64-byte cacheline */ u64 SAL_nasids_size; /* SAL: size of each nasid mask in bytes */ }; @@ -534,7 +534,7 @@ struct xpc_partition { /* XPC HB infrastructure */ u8 remote_rp_version; /* version# of partition's rsvd pg */ - unsigned long remote_rp_stamp; /* time when rsvd pg was initialized */ + unsigned long remote_rp_ts_jiffies; /* timestamp when rsvd pg setup */ u64 remote_rp_pa; /* phys addr of partition's rsvd pg */ u64 last_heartbeat; /* HB at last read */ u32 activate_IRQ_rcvd; /* IRQs since activation */ diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 36dfccea524..e7ff9e1670f 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -862,8 +862,8 @@ xpc_do_exit(enum xp_retval reason) DBUG_ON(xpc_any_partition_engaged()); DBUG_ON(xpc_any_hbs_allowed() != 0); - /* indicate to others that our reserved page is uninitialized */ - xpc_rsvd_page->stamp = 0; + /* a zero timestamp indicates our rsvd page is not initialized */ + xpc_rsvd_page->ts_jiffies = 0; if (reason == xpUnloading) { (void)unregister_die_notifier(&xpc_die_notifier); @@ -1152,8 +1152,8 @@ xpc_init(void) /* initialization was not successful */ out_3: - /* indicate to others that our reserved page is uninitialized */ - xpc_rsvd_page->stamp = 0; + /* a zero timestamp indicates our rsvd page is not initialized */ + xpc_rsvd_page->ts_jiffies = 0; (void)unregister_die_notifier(&xpc_die_notifier); (void)unregister_reboot_notifier(&xpc_reboot_notifier); diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index ca6784f5597..70d4a00c972 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -133,7 +133,7 @@ xpc_setup_rsvd_page(void) { struct xpc_rsvd_page *rp; u64 rp_pa; - unsigned long new_stamp; + unsigned long new_ts_jiffies; /* get the local reserved page's address */ @@ -183,10 +183,10 @@ xpc_setup_rsvd_page(void) * This signifies to the remote partition that our reserved * page is initialized. */ - new_stamp = jiffies; - if (new_stamp == 0 || new_stamp == rp->stamp) - new_stamp++; - rp->stamp = new_stamp; + new_ts_jiffies = jiffies; + if (new_ts_jiffies == 0 || new_ts_jiffies == rp->ts_jiffies) + new_ts_jiffies++; + rp->ts_jiffies = new_ts_jiffies; return rp; } @@ -225,8 +225,8 @@ xpc_get_remote_rp(int nasid, unsigned long *discovered_nasids, discovered_nasids[l] |= remote_part_nasids[l]; } - /* see if the reserved page has been set up by XPC */ - if (remote_rp->stamp == 0) + /* zero timestamp indicates the reserved page has not been setup */ + if (remote_rp->ts_jiffies == 0) return xpRsvdPageNotSet; if (XPC_VERSION_MAJOR(remote_rp->version) != diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index f82889f6015..4b5f69edf0d 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -863,8 +863,8 @@ xpc_partition_deactivation_requested_sn2(short partid) */ static void xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version, - unsigned long *remote_rp_stamp, u64 remote_rp_pa, - u64 remote_vars_pa, + unsigned long *remote_rp_ts_jiffies, + u64 remote_rp_pa, u64 remote_vars_pa, struct xpc_vars_sn2 *remote_vars) { struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; @@ -873,9 +873,9 @@ xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version, dev_dbg(xpc_part, " remote_rp_version = 0x%016x\n", part->remote_rp_version); - part->remote_rp_stamp = *remote_rp_stamp; - dev_dbg(xpc_part, " remote_rp_stamp = 0x%016lx\n", - part->remote_rp_stamp); + part->remote_rp_ts_jiffies = *remote_rp_ts_jiffies; + dev_dbg(xpc_part, " remote_rp_ts_jiffies = 0x%016lx\n", + part->remote_rp_ts_jiffies); part->remote_rp_pa = remote_rp_pa; dev_dbg(xpc_part, " remote_rp_pa = 0x%016lx\n", part->remote_rp_pa); @@ -933,7 +933,7 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) u64 remote_vars_pa; int remote_rp_version; int reactivate = 0; - unsigned long remote_rp_stamp = 0; + unsigned long remote_rp_ts_jiffies = 0; short partid; struct xpc_partition *part; struct xpc_partition_sn2 *part_sn2; @@ -952,7 +952,7 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) remote_vars_pa = remote_rp->sn.vars_pa; remote_rp_version = remote_rp->version; - remote_rp_stamp = remote_rp->stamp; + remote_rp_ts_jiffies = remote_rp->ts_jiffies; partid = remote_rp->SAL_partid; part = &xpc_partitions[partid]; @@ -981,8 +981,9 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) part->act_state == XPC_P_INACTIVE) { xpc_update_partition_info_sn2(part, remote_rp_version, - &remote_rp_stamp, remote_rp_pa, - remote_vars_pa, remote_vars); + &remote_rp_ts_jiffies, + remote_rp_pa, remote_vars_pa, + remote_vars); if (xpc_partition_deactivation_requested_sn2(partid)) { /* @@ -999,7 +1000,7 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) DBUG_ON(part->remote_rp_version == 0); DBUG_ON(part_sn2->remote_vars_version == 0); - if (remote_rp_stamp != part->remote_rp_stamp) { + if (remote_rp_ts_jiffies != part->remote_rp_ts_jiffies) { /* the other side rebooted */ @@ -1007,8 +1008,9 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) DBUG_ON(xpc_partition_deactivation_requested_sn2(partid)); xpc_update_partition_info_sn2(part, remote_rp_version, - &remote_rp_stamp, remote_rp_pa, - remote_vars_pa, remote_vars); + &remote_rp_ts_jiffies, + remote_rp_pa, remote_vars_pa, + remote_vars); reactivate = 1; } -- GitLab From 261f3b4979db88d29fc86aad9f76fbc0c2c6d21a Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:16 -0700 Subject: [PATCH 0410/1024] sgi-xp: enable building of XPC/XPNET on x86_64 Get XPC/XPNET to build on x86_64. Trying to modprobe them up on a non-UV or sn2 system will result in a -ENODEV. Signed-off-by: Dean Nelson Cc: Jack Steiner Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/Kconfig | 2 +- drivers/misc/sgi-xp/Makefile | 14 ++++++--- drivers/misc/sgi-xp/xp.h | 32 ++++++++++++------- drivers/misc/sgi-xp/xp_main.c | 10 +++++- drivers/misc/sgi-xp/xp_sn2.c | 10 ++++++ drivers/misc/sgi-xp/xpc.h | 34 +++++++++----------- drivers/misc/sgi-xp/xpc_channel.c | 18 ++++------- drivers/misc/sgi-xp/xpc_main.c | 49 +++++++++++++++-------------- drivers/misc/sgi-xp/xpc_partition.c | 47 ++++++++++++--------------- drivers/misc/sgi-xp/xpc_sn2.c | 30 +++++++++++++++--- drivers/misc/sgi-xp/xpc_uv.c | 7 ++--- drivers/misc/sgi-xp/xpnet.c | 28 +++++++---------- 12 files changed, 155 insertions(+), 126 deletions(-) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4b288f43ca8..fa50e9ede0e 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -426,7 +426,7 @@ config ENCLOSURE_SERVICES config SGI_XP tristate "Support communication between SGI SSIs" - depends on IA64_GENERIC || IA64_SGI_SN2 + depends on IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || (X86_64 && SMP) select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 ---help--- diff --git a/drivers/misc/sgi-xp/Makefile b/drivers/misc/sgi-xp/Makefile index b3eeff31ebf..35ce2857807 100644 --- a/drivers/misc/sgi-xp/Makefile +++ b/drivers/misc/sgi-xp/Makefile @@ -3,11 +3,17 @@ # obj-$(CONFIG_SGI_XP) += xp.o -xp-y := xp_main.o xp_uv.o -xp-$(CONFIG_IA64) += xp_sn2.o xp_nofault.o +xp-y := xp_main.o +xp-$(CONFIG_IA64_SGI_SN2) += xp_sn2.o xp_nofault.o +xp-$(CONFIG_IA64_GENERIC) += xp_sn2.o xp_nofault.o xp_uv.o +xp-$(CONFIG_IA64_SGI_UV) += xp_uv.o +xp-$(CONFIG_X86_64) += xp_uv.o obj-$(CONFIG_SGI_XP) += xpc.o -xpc-y := xpc_main.o xpc_uv.o xpc_channel.o xpc_partition.o -xpc-$(CONFIG_IA64) += xpc_sn2.o +xpc-y := xpc_main.o xpc_channel.o xpc_partition.o +xpc-$(CONFIG_IA64_SGI_SN2) += xpc_sn2.o +xpc-$(CONFIG_IA64_GENERIC) += xpc_sn2.o xpc_uv.o +xpc-$(CONFIG_IA64_SGI_UV) += xpc_uv.o +xpc-$(CONFIG_X86_64) += xpc_uv.o obj-$(CONFIG_SGI_XP) += xpnet.o diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 3054fae8b02..01bf1a2cd8e 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -13,18 +13,17 @@ #ifndef _DRIVERS_MISC_SGIXP_XP_H #define _DRIVERS_MISC_SGIXP_XP_H -#include -#include #include -#include + #ifdef CONFIG_IA64 -#include +#include +#include /* defines is_shub1() and is_shub2() */ +#define is_shub() ia64_platform_is("sn2") +#define is_uv() ia64_platform_is("uv") #endif - -#ifdef USE_DBUG_ON -#define DBUG_ON(condition) BUG_ON(condition) -#else -#define DBUG_ON(condition) +#ifdef CONFIG_X86_64 +#include +#define is_uv() is_uv_system() #endif #ifndef is_shub1 @@ -36,13 +35,19 @@ #endif #ifndef is_shub -#define is_shub() (is_shub1() || is_shub2()) +#define is_shub() 0 #endif #ifndef is_uv #define is_uv() 0 #endif +#ifdef USE_DBUG_ON +#define DBUG_ON(condition) BUG_ON(condition) +#else +#define DBUG_ON(condition) +#endif + /* * Define the maximum number of partitions the system can possibly support. * It is based on the maximum number of hardware partitionable regions. The @@ -200,7 +205,9 @@ enum xp_retval { xpPayloadTooBig, /* 55: payload too large for message slot */ xpUnsupported, /* 56: unsupported functionality or resource */ - xpUnknownReason /* 57: unknown reason - must be last in enum */ + xpNeedMoreInfo, /* 57: more info is needed by SAL */ + + xpUnknownReason /* 58: unknown reason - must be last in enum */ }; /* @@ -339,8 +346,11 @@ xpc_partid_to_nasids(short partid, void *nasids) } extern short xp_max_npartitions; +extern short xp_partition_id; +extern u8 xp_region_size; extern enum xp_retval (*xp_remote_memcpy) (void *, const void *, size_t); +extern int (*xp_cpu_to_nasid) (int); extern u64 xp_nofault_PIOR_target; extern int xp_nofault_PIOR(void *); diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c index 9c0ce2f15ff..c34b23fe498 100644 --- a/drivers/misc/sgi-xp/xp_main.c +++ b/drivers/misc/sgi-xp/xp_main.c @@ -14,7 +14,6 @@ * */ -#include #include #include #include "xp.h" @@ -36,9 +35,18 @@ struct device *xp = &xp_dbg_subname; short xp_max_npartitions; EXPORT_SYMBOL_GPL(xp_max_npartitions); +short xp_partition_id; +EXPORT_SYMBOL_GPL(xp_partition_id); + +u8 xp_region_size; +EXPORT_SYMBOL_GPL(xp_region_size); + enum xp_retval (*xp_remote_memcpy) (void *dst, const void *src, size_t len); EXPORT_SYMBOL_GPL(xp_remote_memcpy); +int (*xp_cpu_to_nasid) (int cpuid); +EXPORT_SYMBOL_GPL(xp_cpu_to_nasid); + /* * xpc_registrations[] keeps track of xpc_connect()'s done by the kernel-level * users of XPC. diff --git a/drivers/misc/sgi-xp/xp_sn2.c b/drivers/misc/sgi-xp/xp_sn2.c index baabc1cb3fe..c6a1ede7d6e 100644 --- a/drivers/misc/sgi-xp/xp_sn2.c +++ b/drivers/misc/sgi-xp/xp_sn2.c @@ -12,6 +12,7 @@ * Architecture specific implementation of common functions. */ +#include #include #include #include @@ -116,14 +117,23 @@ xp_remote_memcpy_sn2(void *vdst, const void *psrc, size_t len) return xpBteCopyError; } +static int +xp_cpu_to_nasid_sn2(int cpuid) +{ + return cpuid_to_nasid(cpuid); +} + enum xp_retval xp_init_sn2(void) { BUG_ON(!is_shub()); xp_max_npartitions = XP_MAX_NPARTITIONS_SN2; + xp_partition_id = sn_partition_id; + xp_region_size = sn_region_size; xp_remote_memcpy = xp_remote_memcpy_sn2; + xp_cpu_to_nasid = xp_cpu_to_nasid_sn2; return xp_register_nofault_code_sn2(); } diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index e194d3140f6..96408fcf5a1 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -13,17 +13,10 @@ #ifndef _DRIVERS_MISC_SGIXP_XPC_H #define _DRIVERS_MISC_SGIXP_XPC_H -#include -#include -#include -#include +#include #include -#include -#include -#include -#include -#include -#include +#include +#include #include "xp.h" /* @@ -179,7 +172,8 @@ struct xpc_vars_part_sn2 { #define XPC_RP_HEADER_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page)) #define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars_sn2)) -#define XPC_RP_PART_NASIDS(_rp) ((u64 *)((u8 *)(_rp) + XPC_RP_HEADER_SIZE)) +#define XPC_RP_PART_NASIDS(_rp) ((unsigned long *)((u8 *)(_rp) + \ + XPC_RP_HEADER_SIZE)) #define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + \ xpc_nasid_mask_nlongs) #define XPC_RP_VARS(_rp) ((struct xpc_vars_sn2 *) \ @@ -202,13 +196,13 @@ struct xpc_vars_part_sn2 { /* * Define a Get/Put value pair (pointers) used with a message queue. */ -struct xpc_gp { +struct xpc_gp_sn2 { s64 get; /* Get value */ s64 put; /* Put value */ }; #define XPC_GP_SIZE \ - L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_MAX_NCHANNELS) + L1_CACHE_ALIGN(sizeof(struct xpc_gp_sn2) * XPC_MAX_NCHANNELS) /* * Define a structure that contains arguments associated with opening and @@ -340,10 +334,10 @@ struct xpc_channel_sn2 { /* various flavors of local and remote Get/Put values */ - struct xpc_gp *local_GP; /* local Get/Put values */ - struct xpc_gp remote_GP; /* remote Get/Put values */ - struct xpc_gp w_local_GP; /* working local Get/Put values */ - struct xpc_gp w_remote_GP; /* working remote Get/Put values */ + struct xpc_gp_sn2 *local_GP; /* local Get/Put values */ + struct xpc_gp_sn2 remote_GP; /* remote Get/Put values */ + struct xpc_gp_sn2 w_local_GP; /* working local Get/Put values */ + struct xpc_gp_sn2 w_remote_GP; /* working remote Get/Put values */ s64 next_msg_to_pull; /* Put value of next msg to pull */ struct mutex msg_to_pull_mutex; /* next msg to pull serialization */ @@ -506,9 +500,9 @@ struct xpc_partition_sn2 { u8 remote_vars_version; /* version# of partition's vars */ void *local_GPs_base; /* base address of kmalloc'd space */ - struct xpc_gp *local_GPs; /* local Get/Put values */ + struct xpc_gp_sn2 *local_GPs; /* local Get/Put values */ void *remote_GPs_base; /* base address of kmalloc'd space */ - struct xpc_gp *remote_GPs; /* copy of remote partition's local */ + struct xpc_gp_sn2 *remote_GPs; /* copy of remote partition's local */ /* Get/Put values */ u64 remote_GPs_pa; /* phys address of remote partition's local */ /* Get/Put values */ @@ -629,6 +623,8 @@ extern void xpc_activate_partition(struct xpc_partition *); extern void xpc_activate_kthreads(struct xpc_channel *, int); extern void xpc_create_kthreads(struct xpc_channel *, int, int); extern void xpc_disconnect_wait(int); +extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (u64, u64 *, u64 *, + size_t *); extern enum xp_retval (*xpc_rsvd_page_init) (struct xpc_rsvd_page *); extern void (*xpc_heartbeat_init) (void); extern void (*xpc_heartbeat_exit) (void); diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index f1afc0a7c33..0615efbe007 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -14,14 +14,7 @@ * */ -#include -#include -#include -#include -#include -#include -#include -#include +#include #include "xpc.h" /* @@ -373,8 +366,9 @@ again: dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY (local_msgqueue_pa=" "0x%lx, local_nentries=%d, remote_nentries=%d) " "received from partid=%d, channel=%d\n", - args->local_msgqueue_pa, args->local_nentries, - args->remote_nentries, ch->partid, ch->number); + (unsigned long)args->local_msgqueue_pa, + args->local_nentries, args->remote_nentries, + ch->partid, ch->number); if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) { spin_unlock_irqrestore(&ch->lock, irq_flags); @@ -940,7 +934,7 @@ xpc_deliver_msg(struct xpc_channel *ch) if (ch->func != NULL) { dev_dbg(xpc_chan, "ch->func() called, msg=0x%p, " "msg_number=%ld, partid=%d, channel=%d\n", - (void *)msg, msg->number, ch->partid, + msg, (signed long)msg->number, ch->partid, ch->number); /* deliver the message to its intended recipient */ @@ -949,7 +943,7 @@ xpc_deliver_msg(struct xpc_channel *ch) dev_dbg(xpc_chan, "ch->func() returned, msg=0x%p, " "msg_number=%ld, partid=%d, channel=%d\n", - (void *)msg, msg->number, ch->partid, + msg, (signed long)msg->number, ch->partid, ch->number); } diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index e7ff9e1670f..f7478cc3572 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -43,19 +43,13 @@ * */ -#include #include -#include -#include -#include +#include +#include #include #include -#include #include #include -#include -#include -#include #include "xpc.h" /* define two XPC debug device structures to be used with dev_dbg() et al */ @@ -175,6 +169,8 @@ static struct notifier_block xpc_die_notifier = { .notifier_call = xpc_system_die, }; +enum xp_retval (*xpc_get_partition_rsvd_page_pa) (u64 buf, u64 *cookie, + u64 *paddr, size_t *len); enum xp_retval (*xpc_rsvd_page_init) (struct xpc_rsvd_page *rp); void (*xpc_heartbeat_init) (void); void (*xpc_heartbeat_exit) (void); @@ -920,7 +916,8 @@ xpc_die_deactivate(void) struct xpc_partition *part; short partid; int any_engaged; - long time, printmsg_time, disengage_timeout; + long keep_waiting; + long wait_to_print; /* keep xpc_hb_checker thread from doing anything (just in case) */ xpc_exiting = 1; @@ -937,16 +934,17 @@ xpc_die_deactivate(void) } } - time = rtc_time(); - printmsg_time = time + - (XPC_DEACTIVATE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second); - disengage_timeout = time + - (xpc_disengage_timelimit * sn_rtc_cycles_per_second); - /* * Though we requested that all other partitions deactivate from us, - * we only wait until they've all disengaged. + * we only wait until they've all disengaged or we've reached the + * defined timelimit. + * + * Given that one iteration through the following while-loop takes + * approximately 200 microseconds, calculate the #of loops to take + * before bailing and the #of loops before printing a waiting message. */ + keep_waiting = xpc_disengage_timelimit * 1000 * 5; + wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5; while (1) { any_engaged = xpc_any_partition_engaged(); @@ -955,8 +953,7 @@ xpc_die_deactivate(void) break; } - time = rtc_time(); - if (time >= disengage_timeout) { + if (!keep_waiting--) { for (partid = 0; partid < xp_max_npartitions; partid++) { if (xpc_partition_engaged(partid)) { @@ -968,15 +965,15 @@ xpc_die_deactivate(void) break; } - if (time >= printmsg_time) { + if (!wait_to_print--) { dev_info(xpc_part, "waiting for remote partitions to " "deactivate, timeout in %ld seconds\n", - (disengage_timeout - time) / - sn_rtc_cycles_per_second); - printmsg_time = time + - (XPC_DEACTIVATE_PRINTMSG_INTERVAL * - sn_rtc_cycles_per_second); + keep_waiting / (1000 * 5)); + wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * + 1000 * 5; } + + udelay(200); } } @@ -991,6 +988,7 @@ xpc_die_deactivate(void) static int xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) { +#ifdef CONFIG_IA64 /* !!! temporary kludge */ switch (event) { case DIE_MACHINE_RESTART: case DIE_MACHINE_HALT: @@ -1019,6 +1017,9 @@ xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused) xpc_online_heartbeat(); break; } +#else + xpc_die_deactivate(); +#endif return NOTIFY_DONE; } diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index 70d4a00c972..f84d6641020 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -15,15 +15,8 @@ * */ -#include -#include -#include -#include -#include -#include -#include -#include -#include +#include +#include #include "xpc.h" /* XPC is exiting flag */ @@ -71,24 +64,23 @@ static u64 xpc_get_rsvd_page_pa(int nasid) { enum xp_retval ret; - s64 status; u64 cookie = 0; u64 rp_pa = nasid; /* seed with nasid */ - u64 len = 0; + size_t len = 0; u64 buf = buf; u64 buf_len = 0; void *buf_base = NULL; while (1) { - status = sn_partition_reserved_page_pa(buf, &cookie, &rp_pa, - &len); + ret = xpc_get_partition_rsvd_page_pa(buf, &cookie, &rp_pa, + &len); - dev_dbg(xpc_part, "SAL returned with status=%li, cookie=" - "0x%016lx, address=0x%016lx, len=0x%016lx\n", - status, cookie, rp_pa, len); + dev_dbg(xpc_part, "SAL returned with ret=%d, cookie=0x%016lx, " + "address=0x%016lx, len=0x%016lx\n", ret, + (unsigned long)cookie, (unsigned long)rp_pa, len); - if (status != SALRET_MORE_PASSES) + if (ret != xpNeedMoreInfo) break; /* !!! L1_CACHE_ALIGN() is only a sn2-bte_copy requirement */ @@ -100,8 +92,9 @@ xpc_get_rsvd_page_pa(int nasid) &buf_base); if (buf_base == NULL) { dev_err(xpc_part, "unable to kmalloc " - "len=0x%016lx\n", buf_len); - status = SALRET_ERROR; + "len=0x%016lx\n", + (unsigned long)buf_len); + ret = xpNoMemory; break; } } @@ -109,17 +102,17 @@ xpc_get_rsvd_page_pa(int nasid) ret = xp_remote_memcpy((void *)buf, (void *)rp_pa, buf_len); if (ret != xpSuccess) { dev_dbg(xpc_part, "xp_remote_memcpy failed %d\n", ret); - status = SALRET_ERROR; break; } } kfree(buf_base); - if (status != SALRET_OK) + if (ret != xpSuccess) rp_pa = 0; - dev_dbg(xpc_part, "reserved page at phys address 0x%016lx\n", rp_pa); + dev_dbg(xpc_part, "reserved page at phys address 0x%016lx\n", + (unsigned long)rp_pa); return rp_pa; } @@ -138,7 +131,7 @@ xpc_setup_rsvd_page(void) /* get the local reserved page's address */ preempt_disable(); - rp_pa = xpc_get_rsvd_page_pa(cpuid_to_nasid(smp_processor_id())); + rp_pa = xpc_get_rsvd_page_pa(xp_cpu_to_nasid(smp_processor_id())); preempt_enable(); if (rp_pa == 0) { dev_err(xpc_part, "SAL failed to locate the reserved page\n"); @@ -150,7 +143,7 @@ xpc_setup_rsvd_page(void) /* SAL_versions < 3 had a SAL_partid defined as a u8 */ rp->SAL_partid &= 0xff; } - BUG_ON(rp->SAL_partid != sn_partition_id); + BUG_ON(rp->SAL_partid != xp_partition_id); if (rp->SAL_partid < 0 || rp->SAL_partid >= xp_max_npartitions) { dev_err(xpc_part, "the reserved page's partid of %d is outside " @@ -237,11 +230,11 @@ xpc_get_remote_rp(int nasid, unsigned long *discovered_nasids, /* check that both remote and local partids are valid for each side */ if (remote_rp->SAL_partid < 0 || remote_rp->SAL_partid >= xp_max_npartitions || - remote_rp->max_npartitions <= sn_partition_id) { + remote_rp->max_npartitions <= xp_partition_id) { return xpInvalidPartid; } - if (remote_rp->SAL_partid == sn_partition_id) + if (remote_rp->SAL_partid == xp_partition_id) return xpLocalPartid; return xpSuccess; @@ -426,7 +419,7 @@ xpc_discovery(void) * protection is in regards to memory, IOI and IPI. */ max_regions = 64; - region_size = sn_region_size; + region_size = xp_region_size; switch (region_size) { case 128: diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 4b5f69edf0d..fde870aebcb 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -13,9 +13,9 @@ * */ -#include #include #include +#include #include #include "xpc.h" @@ -176,7 +176,7 @@ xpc_send_IRQ_sn2(struct amo *amo, u64 flag, int nasid, int phys_cpuid, local_irq_restore(irq_flags); - return ((ret == 0) ? xpSuccess : xpPioReadError); + return (ret == 0) ? xpSuccess : xpPioReadError; } static struct amo * @@ -284,7 +284,7 @@ xpc_handle_notify_IRQ_sn2(int irq, void *dev_id) short partid = (short)(u64)dev_id; struct xpc_partition *part = &xpc_partitions[partid]; - DBUG_ON(partid < 0 || partid >= xp_max_npartitions); + DBUG_ON(partid < 0 || partid >= XP_MAX_NPARTITIONS_SN2); if (xpc_part_ref(part)) { xpc_check_for_sent_chctl_flags_sn2(part); @@ -576,6 +576,25 @@ xpc_allow_amo_ops_shub_wars_1_1_sn2(void) } } +static enum xp_retval +xpc_get_partition_rsvd_page_pa_sn2(u64 buf, u64 *cookie, u64 *paddr, + size_t *len) +{ + s64 status; + enum xp_retval ret; + + status = sn_partition_reserved_page_pa(buf, cookie, paddr, len); + if (status == SALRET_OK) + ret = xpSuccess; + else if (status == SALRET_MORE_PASSES) + ret = xpNeedMoreInfo; + else + ret = xpSalError; + + return ret; +} + + static enum xp_retval xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) { @@ -636,7 +655,7 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) /* clear xpc_vars_part_sn2 */ memset((u64 *)xpc_vars_part_sn2, 0, sizeof(struct xpc_vars_part_sn2) * - xp_max_npartitions); + XP_MAX_NPARTITIONS_SN2); /* initialize the activate IRQ related amo variables */ for (i = 0; i < xpc_nasid_mask_nlongs; i++) @@ -699,7 +718,7 @@ xpc_check_remote_hb_sn2(void) remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2; - for (partid = 0; partid < xp_max_npartitions; partid++) { + for (partid = 0; partid < XP_MAX_NPARTITIONS_SN2; partid++) { if (xpc_exiting) break; @@ -2386,6 +2405,7 @@ xpc_init_sn2(void) int ret; size_t buf_size; + xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2; xpc_rsvd_page_init = xpc_rsvd_page_init_sn2; xpc_increment_heartbeat = xpc_increment_heartbeat_sn2; xpc_offline_heartbeat = xpc_offline_heartbeat_sn2; diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 2aec1dfbb3d..232867aa692 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -14,11 +14,8 @@ */ #include - -/* !!! #include */ -/* !!! uv_gpa() is defined in */ -#define uv_gpa(_a) ((unsigned long)_a) - +#include +#include "../sgi-gru/grukservices.h" #include "xpc.h" static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV); diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index 07c89c4e2c2..49385f44170 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -21,17 +21,8 @@ */ #include -#include -#include -#include #include #include -#include -#include -#include -#include -#include -#include #include "xp.h" /* @@ -175,8 +166,9 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg) return; } - dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size, - msg->leadin_ignore, msg->tailout_ignore); + dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", + (unsigned long)msg->buf_pa, msg->size, msg->leadin_ignore, + msg->tailout_ignore); /* reserve an extra cache line */ skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES); @@ -320,8 +312,10 @@ xpnet_dev_open(struct net_device *dev) dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, " "%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity, - XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS, - XPNET_MAX_IDLE_KTHREADS); + (unsigned long)XPNET_MSG_SIZE, + (unsigned long)XPNET_MSG_NENTRIES, + (unsigned long)XPNET_MAX_KTHREADS, + (unsigned long)XPNET_MAX_IDLE_KTHREADS); ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL, XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, @@ -439,8 +433,8 @@ xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg, dev_dbg(xpnet, "sending XPC message to %d:%d\n" KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, " "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n", - dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size, - msg->leadin_ignore, msg->tailout_ignore); + dest_partid, XPC_NET_CHANNEL, (unsigned long)msg->buf_pa, + msg->size, msg->leadin_ignore, msg->tailout_ignore); atomic_inc(&queued_msg->use_count); @@ -602,8 +596,8 @@ xpnet_init(void) */ xpnet_device->dev_addr[0] = 0x02; /* locally administered, no OUI */ - xpnet_device->dev_addr[XPNET_PARTID_OCTET + 1] = sn_partition_id; - xpnet_device->dev_addr[XPNET_PARTID_OCTET + 0] = (sn_partition_id >> 8); + xpnet_device->dev_addr[XPNET_PARTID_OCTET + 1] = xp_partition_id; + xpnet_device->dev_addr[XPNET_PARTID_OCTET + 0] = (xp_partition_id >> 8); /* * ether_setup() sets this to a multicast device. We are -- GitLab From a812dcc3a298eef650c381e094e2cf41a4ecc9ad Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:16 -0700 Subject: [PATCH 0411/1024] sgi-xp: add usage of GRU driver by xpc_remote_memcpy() Add UV support to xpc_remote_memcpy(), which involves interfacing to the GRU driver. Signed-off-by: Dean Nelson Cc: Jack Steiner Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xp.h | 8 +++- drivers/misc/sgi-xp/xp_main.c | 6 ++- drivers/misc/sgi-xp/xp_sn2.c | 50 ++++++++++----------- drivers/misc/sgi-xp/xp_uv.c | 27 ++++++++++-- drivers/misc/sgi-xp/xpc.h | 44 ++++++++++--------- drivers/misc/sgi-xp/xpc_channel.c | 5 +-- drivers/misc/sgi-xp/xpc_main.c | 8 ++-- drivers/misc/sgi-xp/xpc_partition.c | 37 ++++++++-------- drivers/misc/sgi-xp/xpc_sn2.c | 68 +++++++++++++++-------------- drivers/misc/sgi-xp/xpc_uv.c | 2 +- drivers/misc/sgi-xp/xpnet.c | 26 +++++------ 11 files changed, 154 insertions(+), 127 deletions(-) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 01bf1a2cd8e..45d0a08c2dd 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -207,7 +207,9 @@ enum xp_retval { xpUnsupported, /* 56: unsupported functionality or resource */ xpNeedMoreInfo, /* 57: more info is needed by SAL */ - xpUnknownReason /* 58: unknown reason - must be last in enum */ + xpGruCopyError, /* 58: gru_copy_gru() returned error */ + + xpUnknownReason /* 59: unknown reason - must be last in enum */ }; /* @@ -349,7 +351,9 @@ extern short xp_max_npartitions; extern short xp_partition_id; extern u8 xp_region_size; -extern enum xp_retval (*xp_remote_memcpy) (void *, const void *, size_t); +extern unsigned long (*xp_pa) (void *); +extern enum xp_retval (*xp_remote_memcpy) (unsigned long, const unsigned long, + size_t); extern int (*xp_cpu_to_nasid) (int); extern u64 xp_nofault_PIOR_target; diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c index c34b23fe498..f86ad3af26b 100644 --- a/drivers/misc/sgi-xp/xp_main.c +++ b/drivers/misc/sgi-xp/xp_main.c @@ -41,7 +41,11 @@ EXPORT_SYMBOL_GPL(xp_partition_id); u8 xp_region_size; EXPORT_SYMBOL_GPL(xp_region_size); -enum xp_retval (*xp_remote_memcpy) (void *dst, const void *src, size_t len); +unsigned long (*xp_pa) (void *addr); +EXPORT_SYMBOL_GPL(xp_pa); + +enum xp_retval (*xp_remote_memcpy) (unsigned long dst_gpa, + const unsigned long src_gpa, size_t len); EXPORT_SYMBOL_GPL(xp_remote_memcpy); int (*xp_cpu_to_nasid) (int cpuid); diff --git a/drivers/misc/sgi-xp/xp_sn2.c b/drivers/misc/sgi-xp/xp_sn2.c index c6a1ede7d6e..1440134caf3 100644 --- a/drivers/misc/sgi-xp/xp_sn2.c +++ b/drivers/misc/sgi-xp/xp_sn2.c @@ -63,7 +63,7 @@ xp_register_nofault_code_sn2(void) return xpSuccess; } -void +static void xp_unregister_nofault_code_sn2(void) { u64 func_addr = *(u64 *)xp_nofault_PIOR; @@ -74,45 +74,42 @@ xp_unregister_nofault_code_sn2(void) err_func_addr, 1, 0); } +/* + * Convert a virtual memory address to a physical memory address. + */ +static unsigned long +xp_pa_sn2(void *addr) +{ + return __pa(addr); +} + /* * Wrapper for bte_copy(). * - * vdst - virtual address of the destination of the transfer. - * psrc - physical address of the source of the transfer. + * dst_pa - physical address of the destination of the transfer. + * src_pa - physical address of the source of the transfer. * len - number of bytes to transfer from source to destination. * * Note: xp_remote_memcpy_sn2() should never be called while holding a spinlock. */ static enum xp_retval -xp_remote_memcpy_sn2(void *vdst, const void *psrc, size_t len) +xp_remote_memcpy_sn2(unsigned long dst_pa, const unsigned long src_pa, + size_t len) { bte_result_t ret; - u64 pdst = ia64_tpa(vdst); - /* ??? What are the rules governing the src and dst addresses passed in? - * ??? Currently we're assuming that dst is a virtual address and src - * ??? is a physical address, is this appropriate? Can we allow them to - * ??? be whatever and we make the change here without damaging the - * ??? addresses? - */ - /* - * Ensure that the physically mapped memory is contiguous. - * - * We do this by ensuring that the memory is from region 7 only. - * If the need should arise to use memory from one of the other - * regions, then modify the BUG_ON() statement to ensure that the - * memory from that region is always physically contiguous. - */ - BUG_ON(REGION_NUMBER(vdst) != RGN_KERNEL); - - ret = bte_copy((u64)psrc, pdst, len, (BTE_NOTIFY | BTE_WACQUIRE), NULL); + ret = bte_copy(src_pa, dst_pa, len, (BTE_NOTIFY | BTE_WACQUIRE), NULL); if (ret == BTE_SUCCESS) return xpSuccess; - if (is_shub2()) - dev_err(xp, "bte_copy() on shub2 failed, error=0x%x\n", ret); - else - dev_err(xp, "bte_copy() failed, error=%d\n", ret); + if (is_shub2()) { + dev_err(xp, "bte_copy() on shub2 failed, error=0x%x dst_pa=" + "0x%016lx src_pa=0x%016lx len=%ld\\n", ret, dst_pa, + src_pa, len); + } else { + dev_err(xp, "bte_copy() failed, error=%d dst_pa=0x%016lx " + "src_pa=0x%016lx len=%ld\\n", ret, dst_pa, src_pa, len); + } return xpBteCopyError; } @@ -132,6 +129,7 @@ xp_init_sn2(void) xp_partition_id = sn_partition_id; xp_region_size = sn_region_size; + xp_pa = xp_pa_sn2; xp_remote_memcpy = xp_remote_memcpy_sn2; xp_cpu_to_nasid = xp_cpu_to_nasid_sn2; diff --git a/drivers/misc/sgi-xp/xp_uv.c b/drivers/misc/sgi-xp/xp_uv.c index 382b1b6bcc0..44f2c2b58c2 100644 --- a/drivers/misc/sgi-xp/xp_uv.c +++ b/drivers/misc/sgi-xp/xp_uv.c @@ -13,13 +13,33 @@ * */ +#include +#include +#include "../sgi-gru/grukservices.h" #include "xp.h" +/* + * Convert a virtual memory address to a physical memory address. + */ +static unsigned long +xp_pa_uv(void *addr) +{ + return uv_gpa(addr); +} + static enum xp_retval -xp_remote_memcpy_uv(void *vdst, const void *psrc, size_t len) +xp_remote_memcpy_uv(unsigned long dst_gpa, const unsigned long src_gpa, + size_t len) { - /* !!! this function needs fleshing out */ - return xpUnsupported; + int ret; + + ret = gru_copy_gpa(dst_gpa, src_gpa, len); + if (ret == 0) + return xpSuccess; + + dev_err(xp, "gru_copy_gpa() failed, dst_gpa=0x%016lx src_gpa=0x%016lx " + "len=%ld\n", dst_gpa, src_gpa, len); + return xpGruCopyError; } enum xp_retval @@ -29,6 +49,7 @@ xp_init_uv(void) xp_max_npartitions = XP_MAX_NPARTITIONS_UV; + xp_pa = xp_pa_uv; xp_remote_memcpy = xp_remote_memcpy_uv; return xpSuccess; diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 96408fcf5a1..49e26993345 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -91,8 +91,8 @@ struct xpc_rsvd_page { u8 version; u8 pad1[3]; /* align to next u64 in 1st 64-byte cacheline */ union { - u64 vars_pa; /* physical address of struct xpc_vars */ - u64 activate_mq_gpa; /* global phys address of activate_mq */ + unsigned long vars_pa; /* phys address of struct xpc_vars */ + unsigned long activate_mq_gpa; /* gru phy addr of activate_mq */ } sn; unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */ u64 pad2[10]; /* align to last u64 in 2nd 64-byte cacheline */ @@ -122,8 +122,8 @@ struct xpc_vars_sn2 { u64 heartbeat_offline; /* if 0, heartbeat should be changing */ int activate_IRQ_nasid; int activate_IRQ_phys_cpuid; - u64 vars_part_pa; - u64 amos_page_pa; /* paddr of page of amos from MSPEC driver */ + unsigned long vars_part_pa; + unsigned long amos_page_pa;/* paddr of page of amos from MSPEC driver */ struct amo *amos_page; /* vaddr of page of amos from MSPEC driver */ }; @@ -142,10 +142,10 @@ struct xpc_vars_sn2 { struct xpc_vars_part_sn2 { u64 magic; - u64 openclose_args_pa; /* physical address of open and close args */ - u64 GPs_pa; /* physical address of Get/Put values */ + unsigned long openclose_args_pa; /* phys addr of open and close args */ + unsigned long GPs_pa; /* physical address of Get/Put values */ - u64 chctl_amo_pa; /* physical address of chctl flags' amo */ + unsigned long chctl_amo_pa; /* physical address of chctl flags' amo */ int notify_IRQ_nasid; /* nasid of where to send notify IRQs */ int notify_IRQ_phys_cpuid; /* CPUID of where to send notify IRQs */ @@ -213,7 +213,7 @@ struct xpc_openclose_args { u16 msg_size; /* sizeof each message entry */ u16 remote_nentries; /* #of message entries in remote msg queue */ u16 local_nentries; /* #of message entries in local msg queue */ - u64 local_msgqueue_pa; /* physical address of local message queue */ + unsigned long local_msgqueue_pa; /* phys addr of local message queue */ }; #define XPC_OPENCLOSE_ARGS_SIZE \ @@ -366,8 +366,8 @@ struct xpc_channel { void *remote_msgqueue_base; /* base address of kmalloc'd space */ struct xpc_msg *remote_msgqueue; /* cached copy of remote partition's */ /* local message queue */ - u64 remote_msgqueue_pa; /* phys addr of remote partition's */ - /* local message queue */ + unsigned long remote_msgqueue_pa; /* phys addr of remote partition's */ + /* local message queue */ atomic_t references; /* #of external references to queues */ @@ -491,12 +491,12 @@ xpc_any_msg_chctl_flags_set(union xpc_channel_ctl_flags *chctl) */ struct xpc_partition_sn2 { - u64 remote_amos_page_pa; /* phys addr of partition's amos page */ + unsigned long remote_amos_page_pa; /* paddr of partition's amos page */ int activate_IRQ_nasid; /* active partition's act/deact nasid */ int activate_IRQ_phys_cpuid; /* active part's act/deact phys cpuid */ - u64 remote_vars_pa; /* phys addr of partition's vars */ - u64 remote_vars_part_pa; /* phys addr of partition's vars part */ + unsigned long remote_vars_pa; /* phys addr of partition's vars */ + unsigned long remote_vars_part_pa; /* paddr of partition's vars part */ u8 remote_vars_version; /* version# of partition's vars */ void *local_GPs_base; /* base address of kmalloc'd space */ @@ -504,10 +504,10 @@ struct xpc_partition_sn2 { void *remote_GPs_base; /* base address of kmalloc'd space */ struct xpc_gp_sn2 *remote_GPs; /* copy of remote partition's local */ /* Get/Put values */ - u64 remote_GPs_pa; /* phys address of remote partition's local */ - /* Get/Put values */ + unsigned long remote_GPs_pa; /* phys addr of remote partition's local */ + /* Get/Put values */ - u64 remote_openclose_args_pa; /* phys addr of remote's args */ + unsigned long remote_openclose_args_pa; /* phys addr of remote's args */ int notify_IRQ_nasid; /* nasid of where to send notify IRQs */ int notify_IRQ_phys_cpuid; /* CPUID of where to send notify IRQs */ @@ -529,7 +529,7 @@ struct xpc_partition { u8 remote_rp_version; /* version# of partition's rsvd pg */ unsigned long remote_rp_ts_jiffies; /* timestamp when rsvd pg setup */ - u64 remote_rp_pa; /* phys addr of partition's rsvd pg */ + unsigned long remote_rp_pa; /* phys addr of partition's rsvd pg */ u64 last_heartbeat; /* HB at last read */ u32 activate_IRQ_rcvd; /* IRQs since activation */ spinlock_t act_lock; /* protect updating of act_state */ @@ -623,7 +623,8 @@ extern void xpc_activate_partition(struct xpc_partition *); extern void xpc_activate_kthreads(struct xpc_channel *, int); extern void xpc_create_kthreads(struct xpc_channel *, int, int); extern void xpc_disconnect_wait(int); -extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (u64, u64 *, u64 *, +extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *, u64 *, + unsigned long *, size_t *); extern enum xp_retval (*xpc_rsvd_page_init) (struct xpc_rsvd_page *); extern void (*xpc_heartbeat_init) (void); @@ -640,8 +641,8 @@ extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *); extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int); extern int (*xpc_n_of_deliverable_msgs) (struct xpc_channel *); extern struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *); -extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *, u64, - int); +extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *, + unsigned long, int); extern void (*xpc_request_partition_reactivation) (struct xpc_partition *); extern void (*xpc_request_partition_deactivation) (struct xpc_partition *); extern void (*xpc_cancel_partition_deactivation_request) ( @@ -690,7 +691,8 @@ extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *); extern void xpc_mark_partition_inactive(struct xpc_partition *); extern void xpc_discovery(void); extern enum xp_retval xpc_get_remote_rp(int, unsigned long *, - struct xpc_rsvd_page *, u64 *); + struct xpc_rsvd_page *, + unsigned long *); extern void xpc_deactivate_partition(const int, struct xpc_partition *, enum xp_retval); extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *); diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 0615efbe007..d7a15f1a78a 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -366,9 +366,8 @@ again: dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY (local_msgqueue_pa=" "0x%lx, local_nentries=%d, remote_nentries=%d) " "received from partid=%d, channel=%d\n", - (unsigned long)args->local_msgqueue_pa, - args->local_nentries, args->remote_nentries, - ch->partid, ch->number); + args->local_msgqueue_pa, args->local_nentries, + args->remote_nentries, ch->partid, ch->number); if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) { spin_unlock_irqrestore(&ch->lock, irq_flags); diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index f7478cc3572..dc686110aef 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -169,8 +169,9 @@ static struct notifier_block xpc_die_notifier = { .notifier_call = xpc_system_die, }; -enum xp_retval (*xpc_get_partition_rsvd_page_pa) (u64 buf, u64 *cookie, - u64 *paddr, size_t *len); +enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie, + unsigned long *rp_pa, + size_t *len); enum xp_retval (*xpc_rsvd_page_init) (struct xpc_rsvd_page *rp); void (*xpc_heartbeat_init) (void); void (*xpc_heartbeat_exit) (void); @@ -189,7 +190,8 @@ int (*xpc_n_of_deliverable_msgs) (struct xpc_channel *ch); struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *ch); void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp, - u64 remote_rp_pa, int nasid); + unsigned long remote_rp_pa, + int nasid); void (*xpc_request_partition_reactivation) (struct xpc_partition *part); void (*xpc_request_partition_deactivation) (struct xpc_partition *part); void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part); diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index f84d6641020..f150dbfcfcc 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -60,15 +60,15 @@ xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) * Given a nasid, get the physical address of the partition's reserved page * for that nasid. This function returns 0 on any error. */ -static u64 +static unsigned long xpc_get_rsvd_page_pa(int nasid) { enum xp_retval ret; u64 cookie = 0; - u64 rp_pa = nasid; /* seed with nasid */ + unsigned long rp_pa = nasid; /* seed with nasid */ size_t len = 0; - u64 buf = buf; - u64 buf_len = 0; + size_t buf_len = 0; + void *buf = buf; void *buf_base = NULL; while (1) { @@ -78,7 +78,7 @@ xpc_get_rsvd_page_pa(int nasid) dev_dbg(xpc_part, "SAL returned with ret=%d, cookie=0x%016lx, " "address=0x%016lx, len=0x%016lx\n", ret, - (unsigned long)cookie, (unsigned long)rp_pa, len); + (unsigned long)cookie, rp_pa, len); if (ret != xpNeedMoreInfo) break; @@ -87,19 +87,17 @@ xpc_get_rsvd_page_pa(int nasid) if (L1_CACHE_ALIGN(len) > buf_len) { kfree(buf_base); buf_len = L1_CACHE_ALIGN(len); - buf = (u64)xpc_kmalloc_cacheline_aligned(buf_len, - GFP_KERNEL, - &buf_base); + buf = xpc_kmalloc_cacheline_aligned(buf_len, GFP_KERNEL, + &buf_base); if (buf_base == NULL) { dev_err(xpc_part, "unable to kmalloc " - "len=0x%016lx\n", - (unsigned long)buf_len); + "len=0x%016lx\n", buf_len); ret = xpNoMemory; break; } } - ret = xp_remote_memcpy((void *)buf, (void *)rp_pa, buf_len); + ret = xp_remote_memcpy(xp_pa(buf), rp_pa, buf_len); if (ret != xpSuccess) { dev_dbg(xpc_part, "xp_remote_memcpy failed %d\n", ret); break; @@ -111,8 +109,7 @@ xpc_get_rsvd_page_pa(int nasid) if (ret != xpSuccess) rp_pa = 0; - dev_dbg(xpc_part, "reserved page at phys address 0x%016lx\n", - (unsigned long)rp_pa); + dev_dbg(xpc_part, "reserved page at phys address 0x%016lx\n", rp_pa); return rp_pa; } @@ -125,7 +122,7 @@ struct xpc_rsvd_page * xpc_setup_rsvd_page(void) { struct xpc_rsvd_page *rp; - u64 rp_pa; + unsigned long rp_pa; unsigned long new_ts_jiffies; /* get the local reserved page's address */ @@ -193,7 +190,7 @@ xpc_setup_rsvd_page(void) */ enum xp_retval xpc_get_remote_rp(int nasid, unsigned long *discovered_nasids, - struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa) + struct xpc_rsvd_page *remote_rp, unsigned long *remote_rp_pa) { int l; enum xp_retval ret; @@ -205,7 +202,7 @@ xpc_get_remote_rp(int nasid, unsigned long *discovered_nasids, return xpNoRsvdPageAddr; /* pull over the reserved page header and part_nasids mask */ - ret = xp_remote_memcpy(remote_rp, (void *)*remote_rp_pa, + ret = xp_remote_memcpy(xp_pa(remote_rp), *remote_rp_pa, XPC_RP_HEADER_SIZE + xpc_nasid_mask_nbytes); if (ret != xpSuccess) return ret; @@ -389,7 +386,7 @@ xpc_discovery(void) { void *remote_rp_base; struct xpc_rsvd_page *remote_rp; - u64 remote_rp_pa; + unsigned long remote_rp_pa; int region; int region_size; int max_regions; @@ -500,7 +497,7 @@ enum xp_retval xpc_initiate_partid_to_nasids(short partid, void *nasid_mask) { struct xpc_partition *part; - u64 part_nasid_pa; + unsigned long part_nasid_pa; part = &xpc_partitions[partid]; if (part->remote_rp_pa == 0) @@ -508,8 +505,8 @@ xpc_initiate_partid_to_nasids(short partid, void *nasid_mask) memset(nasid_mask, 0, xpc_nasid_mask_nbytes); - part_nasid_pa = (u64)XPC_RP_PART_NASIDS(part->remote_rp_pa); + part_nasid_pa = (unsigned long)XPC_RP_PART_NASIDS(part->remote_rp_pa); - return xp_remote_memcpy(nasid_mask, (void *)part_nasid_pa, + return xp_remote_memcpy(xp_pa(nasid_mask), part_nasid_pa, xpc_nasid_mask_nbytes); } diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index fde870aebcb..1571a7cdf9d 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -207,8 +207,8 @@ xpc_handle_activate_IRQ_sn2(int irq, void *dev_id) * Flag the appropriate amo variable and send an IRQ to the specified node. */ static void -xpc_send_activate_IRQ_sn2(u64 amos_page_pa, int from_nasid, int to_nasid, - int to_phys_cpuid) +xpc_send_activate_IRQ_sn2(unsigned long amos_page_pa, int from_nasid, + int to_nasid, int to_phys_cpuid) { struct amo *amos = (struct amo *)__va(amos_page_pa + (XPC_ACTIVATE_IRQ_AMOS_SN2 * @@ -404,7 +404,7 @@ xpc_send_chctl_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) args->remote_nentries = ch->remote_nentries; args->local_nentries = ch->local_nentries; - args->local_msgqueue_pa = __pa(ch->local_msgqueue); + args->local_msgqueue_pa = xp_pa(ch->local_msgqueue); XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREPLY, irq_flags); } @@ -577,13 +577,13 @@ xpc_allow_amo_ops_shub_wars_1_1_sn2(void) } static enum xp_retval -xpc_get_partition_rsvd_page_pa_sn2(u64 buf, u64 *cookie, u64 *paddr, +xpc_get_partition_rsvd_page_pa_sn2(void *buf, u64 *cookie, unsigned long *rp_pa, size_t *len) { s64 status; enum xp_retval ret; - status = sn_partition_reserved_page_pa(buf, cookie, paddr, len); + status = sn_partition_reserved_page_pa((u64)buf, cookie, rp_pa, len); if (status == SALRET_OK) ret = xpSuccess; else if (status == SALRET_MORE_PASSES) @@ -604,7 +604,7 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) xpc_vars_sn2 = XPC_RP_VARS(rp); - rp->sn.vars_pa = __pa(xpc_vars_sn2); + rp->sn.vars_pa = xp_pa(xpc_vars_sn2); /* vars_part array follows immediately after vars */ xpc_vars_part_sn2 = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) + @@ -649,7 +649,7 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) xpc_vars_sn2->version = XPC_V_VERSION; xpc_vars_sn2->activate_IRQ_nasid = cpuid_to_nasid(0); xpc_vars_sn2->activate_IRQ_phys_cpuid = cpu_physical_id(0); - xpc_vars_sn2->vars_part_pa = __pa(xpc_vars_part_sn2); + xpc_vars_sn2->vars_part_pa = xp_pa(xpc_vars_part_sn2); xpc_vars_sn2->amos_page_pa = ia64_tpa((u64)amos_page); xpc_vars_sn2->amos_page = amos_page; /* save for next load of XPC */ @@ -734,8 +734,8 @@ xpc_check_remote_hb_sn2(void) } /* pull the remote_hb cache line */ - ret = xp_remote_memcpy(remote_vars, - (void *)part->sn.sn2.remote_vars_pa, + ret = xp_remote_memcpy(xp_pa(remote_vars), + part->sn.sn2.remote_vars_pa, XPC_RP_VARS_SIZE); if (ret != xpSuccess) { XPC_DEACTIVATE_PARTITION(part, ret); @@ -768,7 +768,8 @@ xpc_check_remote_hb_sn2(void) * assumed to be of size XPC_RP_VARS_SIZE. */ static enum xp_retval -xpc_get_remote_vars_sn2(u64 remote_vars_pa, struct xpc_vars_sn2 *remote_vars) +xpc_get_remote_vars_sn2(unsigned long remote_vars_pa, + struct xpc_vars_sn2 *remote_vars) { enum xp_retval ret; @@ -776,7 +777,7 @@ xpc_get_remote_vars_sn2(u64 remote_vars_pa, struct xpc_vars_sn2 *remote_vars) return xpVarsNotSet; /* pull over the cross partition variables */ - ret = xp_remote_memcpy(remote_vars, (void *)remote_vars_pa, + ret = xp_remote_memcpy(xp_pa(remote_vars), remote_vars_pa, XPC_RP_VARS_SIZE); if (ret != xpSuccess) return ret; @@ -791,7 +792,7 @@ xpc_get_remote_vars_sn2(u64 remote_vars_pa, struct xpc_vars_sn2 *remote_vars) static void xpc_request_partition_activation_sn2(struct xpc_rsvd_page *remote_rp, - u64 remote_rp_pa, int nasid) + unsigned long remote_rp_pa, int nasid) { xpc_send_local_activate_IRQ_sn2(nasid); } @@ -883,7 +884,8 @@ xpc_partition_deactivation_requested_sn2(short partid) static void xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version, unsigned long *remote_rp_ts_jiffies, - u64 remote_rp_pa, u64 remote_vars_pa, + unsigned long remote_rp_pa, + unsigned long remote_vars_pa, struct xpc_vars_sn2 *remote_vars) { struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; @@ -948,8 +950,8 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) { struct xpc_rsvd_page *remote_rp; struct xpc_vars_sn2 *remote_vars; - u64 remote_rp_pa; - u64 remote_vars_pa; + unsigned long remote_rp_pa; + unsigned long remote_vars_pa; int remote_rp_version; int reactivate = 0; unsigned long remote_rp_ts_jiffies = 0; @@ -1291,11 +1293,11 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) * The setting of the magic # indicates that these per partition * specific variables are ready to be used. */ - xpc_vars_part_sn2[partid].GPs_pa = __pa(part_sn2->local_GPs); + xpc_vars_part_sn2[partid].GPs_pa = xp_pa(part_sn2->local_GPs); xpc_vars_part_sn2[partid].openclose_args_pa = - __pa(part->local_openclose_args); + xp_pa(part->local_openclose_args); xpc_vars_part_sn2[partid].chctl_amo_pa = - __pa(part_sn2->local_chctl_amo_va); + xp_pa(part_sn2->local_chctl_amo_va); cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */ xpc_vars_part_sn2[partid].notify_IRQ_nasid = cpuid_to_nasid(cpuid); xpc_vars_part_sn2[partid].notify_IRQ_phys_cpuid = @@ -1382,25 +1384,25 @@ xpc_teardown_infrastructure_sn2(struct xpc_partition *part) * Create a wrapper that hides the underlying mechanism for pulling a cacheline * (or multiple cachelines) from a remote partition. * - * src must be a cacheline aligned physical address on the remote partition. + * src_pa must be a cacheline aligned physical address on the remote partition. * dst must be a cacheline aligned virtual address on this partition. * cnt must be cacheline sized */ /* ??? Replace this function by call to xp_remote_memcpy() or bte_copy()? */ static enum xp_retval xpc_pull_remote_cachelines_sn2(struct xpc_partition *part, void *dst, - const void *src, size_t cnt) + const unsigned long src_pa, size_t cnt) { enum xp_retval ret; - DBUG_ON((u64)src != L1_CACHE_ALIGN((u64)src)); - DBUG_ON((u64)dst != L1_CACHE_ALIGN((u64)dst)); + DBUG_ON(src_pa != L1_CACHE_ALIGN(src_pa)); + DBUG_ON((unsigned long)dst != L1_CACHE_ALIGN((unsigned long)dst)); DBUG_ON(cnt != L1_CACHE_ALIGN(cnt)); if (part->act_state == XPC_P_DEACTIVATING) return part->reason; - ret = xp_remote_memcpy(dst, src, cnt); + ret = xp_remote_memcpy(xp_pa(dst), src_pa, cnt); if (ret != xpSuccess) { dev_dbg(xpc_chan, "xp_remote_memcpy() from partition %d failed," " ret=%d\n", XPC_PARTID(part), ret); @@ -1420,7 +1422,8 @@ xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) struct xpc_vars_part_sn2 *pulled_entry_cacheline = (struct xpc_vars_part_sn2 *)L1_CACHE_ALIGN((u64)buffer); struct xpc_vars_part_sn2 *pulled_entry; - u64 remote_entry_cacheline_pa, remote_entry_pa; + unsigned long remote_entry_cacheline_pa; + unsigned long remote_entry_pa; short partid = XPC_PARTID(part); enum xp_retval ret; @@ -1440,7 +1443,7 @@ xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) (L1_CACHE_BYTES - 1))); ret = xpc_pull_remote_cachelines_sn2(part, pulled_entry_cacheline, - (void *)remote_entry_cacheline_pa, + remote_entry_cacheline_pa, L1_CACHE_BYTES); if (ret != xpSuccess) { dev_dbg(xpc_chan, "failed to pull XPC vars_part from " @@ -1587,7 +1590,7 @@ xpc_get_chctl_all_flags_sn2(struct xpc_partition *part) if (xpc_any_openclose_chctl_flags_set(&chctl)) { ret = xpc_pull_remote_cachelines_sn2(part, part-> remote_openclose_args, - (void *)part_sn2-> + part_sn2-> remote_openclose_args_pa, XPC_OPENCLOSE_ARGS_SIZE); if (ret != xpSuccess) { @@ -1604,7 +1607,7 @@ xpc_get_chctl_all_flags_sn2(struct xpc_partition *part) if (xpc_any_msg_chctl_flags_set(&chctl)) { ret = xpc_pull_remote_cachelines_sn2(part, part_sn2->remote_GPs, - (void *)part_sn2->remote_GPs_pa, + part_sn2->remote_GPs_pa, XPC_GP_SIZE); if (ret != xpSuccess) { XPC_DEACTIVATE_PARTITION(part, ret); @@ -1971,8 +1974,10 @@ xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get) { struct xpc_partition *part = &xpc_partitions[ch->partid]; struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; - struct xpc_msg *remote_msg, *msg; - u32 msg_index, nmsgs; + unsigned long remote_msg_pa; + struct xpc_msg *msg; + u32 msg_index; + u32 nmsgs; u64 msg_offset; enum xp_retval ret; @@ -1996,10 +2001,9 @@ xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get) msg_offset = msg_index * ch->msg_size; msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset); - remote_msg = (struct xpc_msg *)(ch->remote_msgqueue_pa + - msg_offset); + remote_msg_pa = ch->remote_msgqueue_pa + msg_offset; - ret = xpc_pull_remote_cachelines_sn2(part, msg, remote_msg, + ret = xpc_pull_remote_cachelines_sn2(part, msg, remote_msg_pa, nmsgs * ch->msg_size); if (ret != xpSuccess) { diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 232867aa692..c2d4ddd6e95 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -61,7 +61,7 @@ xpc_heartbeat_exit_uv(void) static void xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp, - u64 remote_rp_pa, int nasid) + unsigned long remote_rp_pa, int nasid) { short partid = remote_rp->SAL_partid; struct xpc_partition *part = &xpc_partitions[partid]; diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index 49385f44170..4f5d6223011 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -44,7 +44,7 @@ struct xpnet_message { u16 version; /* Version for this message */ u16 embedded_bytes; /* #of bytes embedded in XPC message */ u32 magic; /* Special number indicating this is xpnet */ - u64 buf_pa; /* phys address of buffer to retrieve */ + unsigned long buf_pa; /* phys address of buffer to retrieve */ u32 size; /* #of bytes in buffer */ u8 leadin_ignore; /* #of bytes to ignore at the beginning */ u8 tailout_ignore; /* #of bytes to ignore at the end */ @@ -152,6 +152,7 @@ static void xpnet_receive(short partid, int channel, struct xpnet_message *msg) { struct sk_buff *skb; + void *dst; enum xp_retval ret; struct xpnet_dev_private *priv = (struct xpnet_dev_private *)xpnet_device->priv; @@ -166,9 +167,8 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg) return; } - dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", - (unsigned long)msg->buf_pa, msg->size, msg->leadin_ignore, - msg->tailout_ignore); + dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size, + msg->leadin_ignore, msg->tailout_ignore); /* reserve an extra cache line */ skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES); @@ -210,15 +210,12 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg) skb_copy_to_linear_data(skb, &msg->data, (size_t)msg->embedded_bytes); } else { + dst = (void *)((u64)skb->data & ~(L1_CACHE_BYTES - 1)); dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t" - "xp_remote_memcpy(0x%p, 0x%p, %hu)\n", (void *) - ((u64)skb->data & ~(L1_CACHE_BYTES - 1)), + "xp_remote_memcpy(0x%p, 0x%p, %hu)\n", dst, (void *)msg->buf_pa, msg->size); - ret = xp_remote_memcpy((void *)((u64)skb->data & - ~(L1_CACHE_BYTES - 1)), - (void *)msg->buf_pa, msg->size); - + ret = xp_remote_memcpy(xp_pa(dst), msg->buf_pa, msg->size); if (ret != xpSuccess) { /* * !!! Need better way of cleaning skb. Currently skb @@ -226,8 +223,7 @@ xpnet_receive(short partid, int channel, struct xpnet_message *msg) * !!! dev_kfree_skb. */ dev_err(xpnet, "xp_remote_memcpy(0x%p, 0x%p, 0x%hx) " - "returned error=0x%x\n", (void *) - ((u64)skb->data & ~(L1_CACHE_BYTES - 1)), + "returned error=0x%x\n", dst, (void *)msg->buf_pa, msg->size, ret); xpc_received(partid, channel, (void *)msg); @@ -428,13 +424,13 @@ xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg, msg->size = end_addr - start_addr; msg->leadin_ignore = (u64)skb->data - start_addr; msg->tailout_ignore = end_addr - (u64)skb_tail_pointer(skb); - msg->buf_pa = __pa(start_addr); + msg->buf_pa = xp_pa((void *)start_addr); dev_dbg(xpnet, "sending XPC message to %d:%d\n" KERN_DEBUG "msg->buf_pa=0x%lx, msg->size=%u, " "msg->leadin_ignore=%u, msg->tailout_ignore=%u\n", - dest_partid, XPC_NET_CHANNEL, (unsigned long)msg->buf_pa, - msg->size, msg->leadin_ignore, msg->tailout_ignore); + dest_partid, XPC_NET_CHANNEL, msg->buf_pa, msg->size, + msg->leadin_ignore, msg->tailout_ignore); atomic_inc(&queued_msg->use_count); -- GitLab From 61deb86e98f51151b225f7563ee1cf2b50857d10 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:17 -0700 Subject: [PATCH 0412/1024] sgi-xp: move xpc_check_remote_hb() to support both SN2 and UV Move xpc_check_remote_hb() so it can support both SN2 and UV. Signed-off-by: Dean Nelson Cc: Jack Steiner Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc.h | 2 +- drivers/misc/sgi-xp/xpc_main.c | 34 ++++++++++++++++- drivers/misc/sgi-xp/xpc_sn2.c | 70 +++++++++++----------------------- 3 files changed, 57 insertions(+), 49 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 49e26993345..f258f89b8d3 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -632,7 +632,7 @@ extern void (*xpc_heartbeat_exit) (void); extern void (*xpc_increment_heartbeat) (void); extern void (*xpc_offline_heartbeat) (void); extern void (*xpc_online_heartbeat) (void); -extern void (*xpc_check_remote_hb) (void); +extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *); extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *); extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *); extern enum xp_retval (*xpc_allocate_msgqueues) (struct xpc_channel *); diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index dc686110aef..f4d866113f2 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -178,7 +178,7 @@ void (*xpc_heartbeat_exit) (void); void (*xpc_increment_heartbeat) (void); void (*xpc_offline_heartbeat) (void); void (*xpc_online_heartbeat) (void); -void (*xpc_check_remote_hb) (void); +enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part); enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part); void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch); @@ -269,6 +269,38 @@ xpc_stop_hb_beater(void) xpc_heartbeat_exit(); } +/* + * At periodic intervals, scan through all active partitions and ensure + * their heartbeat is still active. If not, the partition is deactivated. + */ +static void +xpc_check_remote_hb(void) +{ + struct xpc_partition *part; + short partid; + enum xp_retval ret; + + for (partid = 0; partid < xp_max_npartitions; partid++) { + + if (xpc_exiting) + break; + + if (partid == xp_partition_id) + continue; + + part = &xpc_partitions[partid]; + + if (part->act_state == XPC_P_INACTIVE || + part->act_state == XPC_P_DEACTIVATING) { + continue; + } + + ret = xpc_get_remote_heartbeat(part); + if (ret != xpSuccess) + XPC_DEACTIVATE_PARTITION(part, ret); + } +} + /* * This thread is responsible for nearly all of the partition * activation/deactivation. diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 1571a7cdf9d..d34cdd533a9 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -704,61 +704,37 @@ xpc_heartbeat_exit_sn2(void) xpc_offline_heartbeat_sn2(); } -/* - * At periodic intervals, scan through all active partitions and ensure - * their heartbeat is still active. If not, the partition is deactivated. - */ -static void -xpc_check_remote_hb_sn2(void) +static enum xp_retval +xpc_get_remote_heartbeat_sn2(struct xpc_partition *part) { struct xpc_vars_sn2 *remote_vars; - struct xpc_partition *part; - short partid; enum xp_retval ret; remote_vars = (struct xpc_vars_sn2 *)xpc_remote_copy_buffer_sn2; - for (partid = 0; partid < XP_MAX_NPARTITIONS_SN2; partid++) { - - if (xpc_exiting) - break; - - if (partid == sn_partition_id) - continue; - - part = &xpc_partitions[partid]; - - if (part->act_state == XPC_P_INACTIVE || - part->act_state == XPC_P_DEACTIVATING) { - continue; - } - - /* pull the remote_hb cache line */ - ret = xp_remote_memcpy(xp_pa(remote_vars), - part->sn.sn2.remote_vars_pa, - XPC_RP_VARS_SIZE); - if (ret != xpSuccess) { - XPC_DEACTIVATE_PARTITION(part, ret); - continue; - } - - dev_dbg(xpc_part, "partid = %d, heartbeat = %ld, last_heartbeat" - " = %ld, heartbeat_offline = %ld, HB_mask[0] = 0x%lx\n", - partid, remote_vars->heartbeat, part->last_heartbeat, - remote_vars->heartbeat_offline, - remote_vars->heartbeating_to_mask[0]); - - if (((remote_vars->heartbeat == part->last_heartbeat) && - (remote_vars->heartbeat_offline == 0)) || - !xpc_hb_allowed(sn_partition_id, - &remote_vars->heartbeating_to_mask)) { - - XPC_DEACTIVATE_PARTITION(part, xpNoHeartbeat); - continue; - } + /* pull the remote vars structure that contains the heartbeat */ + ret = xp_remote_memcpy(xp_pa(remote_vars), + part->sn.sn2.remote_vars_pa, + XPC_RP_VARS_SIZE); + if (ret != xpSuccess) + return ret; + dev_dbg(xpc_part, "partid=%d, heartbeat=%ld, last_heartbeat=%ld, " + "heartbeat_offline=%ld, HB_mask[0]=0x%lx\n", XPC_PARTID(part), + remote_vars->heartbeat, part->last_heartbeat, + remote_vars->heartbeat_offline, + remote_vars->heartbeating_to_mask[0]); + + if ((remote_vars->heartbeat == part->last_heartbeat && + remote_vars->heartbeat_offline == 0) || + !xpc_hb_allowed(sn_partition_id, + &remote_vars->heartbeating_to_mask)) { + ret = xpNoHeartbeat; + } else { part->last_heartbeat = remote_vars->heartbeat; } + + return ret; } /* @@ -2416,7 +2392,7 @@ xpc_init_sn2(void) xpc_online_heartbeat = xpc_online_heartbeat_sn2; xpc_heartbeat_init = xpc_heartbeat_init_sn2; xpc_heartbeat_exit = xpc_heartbeat_exit_sn2; - xpc_check_remote_hb = xpc_check_remote_hb_sn2; + xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_sn2; xpc_request_partition_activation = xpc_request_partition_activation_sn2; xpc_request_partition_reactivation = -- GitLab From 83469b5525b4a35be40b17cb41d64118d84d9f80 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:18 -0700 Subject: [PATCH 0413/1024] sgi-xp: cleanup naming of partition defines Cleanup naming of partition defines. Signed-off-by: Dean Nelson Cc: Jack Steiner Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xpc.h | 22 ++++++++++---------- drivers/misc/sgi-xp/xpc_channel.c | 10 ++++----- drivers/misc/sgi-xp/xpc_main.c | 32 ++++++++++++++--------------- drivers/misc/sgi-xp/xpc_partition.c | 18 ++++++++-------- drivers/misc/sgi-xp/xpc_sn2.c | 20 +++++++++--------- 5 files changed, 51 insertions(+), 51 deletions(-) diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index f258f89b8d3..1e48f776505 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -576,21 +576,21 @@ struct xpc_partition { /* struct xpc_partition act_state values (for XPC HB) */ -#define XPC_P_INACTIVE 0x00 /* partition is not active */ -#define XPC_P_ACTIVATION_REQ 0x01 /* created thread to activate */ -#define XPC_P_ACTIVATING 0x02 /* activation thread started */ -#define XPC_P_ACTIVE 0x03 /* xpc_partition_up() was called */ -#define XPC_P_DEACTIVATING 0x04 /* partition deactivation initiated */ +#define XPC_P_AS_INACTIVE 0x00 /* partition is not active */ +#define XPC_P_AS_ACTIVATION_REQ 0x01 /* created thread to activate */ +#define XPC_P_AS_ACTIVATING 0x02 /* activation thread started */ +#define XPC_P_AS_ACTIVE 0x03 /* xpc_partition_up() was called */ +#define XPC_P_AS_DEACTIVATING 0x04 /* partition deactivation initiated */ #define XPC_DEACTIVATE_PARTITION(_p, _reason) \ xpc_deactivate_partition(__LINE__, (_p), (_reason)) /* struct xpc_partition setup_state values */ -#define XPC_P_UNSET 0x00 /* infrastructure was never setup */ -#define XPC_P_SETUP 0x01 /* infrastructure is setup */ -#define XPC_P_WTEARDOWN 0x02 /* waiting to teardown infrastructure */ -#define XPC_P_TORNDOWN 0x03 /* infrastructure is torndown */ +#define XPC_P_SS_UNSET 0x00 /* infrastructure was never setup */ +#define XPC_P_SS_SETUP 0x01 /* infrastructure is setup */ +#define XPC_P_SS_WTEARDOWN 0x02 /* waiting to teardown infrastructure */ +#define XPC_P_SS_TORNDOWN 0x03 /* infrastructure is torndown */ /* * struct xpc_partition_sn2's dropped notify IRQ timer is set to wait the @@ -787,7 +787,7 @@ xpc_part_deref(struct xpc_partition *part) s32 refs = atomic_dec_return(&part->references); DBUG_ON(refs < 0); - if (refs == 0 && part->setup_state == XPC_P_WTEARDOWN) + if (refs == 0 && part->setup_state == XPC_P_SS_WTEARDOWN) wake_up(&part->teardown_wq); } @@ -797,7 +797,7 @@ xpc_part_ref(struct xpc_partition *part) int setup; atomic_inc(&part->references); - setup = (part->setup_state == XPC_P_SETUP); + setup = (part->setup_state == XPC_P_SS_SETUP); if (!setup) xpc_part_deref(part); diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index d7a15f1a78a..17ab75d69e8 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -99,7 +99,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) DBUG_ON((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) && !(ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE)); - if (part->act_state == XPC_P_DEACTIVATING) { + if (part->act_state == XPC_P_AS_DEACTIVATING) { /* can't proceed until the other side disengages from us */ if (xpc_partition_engaged(ch->partid)) return; @@ -155,7 +155,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) /* we won't lose the CPU since we're holding ch->lock */ complete(&ch->wdisconnect_wait); } else if (ch->delayed_chctl_flags) { - if (part->act_state != XPC_P_DEACTIVATING) { + if (part->act_state != XPC_P_AS_DEACTIVATING) { /* time to take action on any delayed chctl flags */ spin_lock(&part->chctl_lock); part->chctl.flags[ch->number] |= @@ -276,7 +276,7 @@ again: "%d, channel=%d\n", ch->partid, ch->number); if (ch->flags & XPC_C_DISCONNECTED) { - DBUG_ON(part->act_state != XPC_P_DEACTIVATING); + DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING); spin_unlock_irqrestore(&ch->lock, irq_flags); return; } @@ -312,7 +312,7 @@ again: "channel=%d\n", args->msg_size, args->local_nentries, ch->partid, ch->number); - if (part->act_state == XPC_P_DEACTIVATING || + if (part->act_state == XPC_P_AS_DEACTIVATING || (ch->flags & XPC_C_ROPENREQUEST)) { spin_unlock_irqrestore(&ch->lock, irq_flags); return; @@ -546,7 +546,7 @@ xpc_process_sent_chctl_flags(struct xpc_partition *part) continue; } - if (part->act_state == XPC_P_DEACTIVATING) + if (part->act_state == XPC_P_AS_DEACTIVATING) continue; if (!(ch_flags & XPC_C_CONNECTED)) { diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index f4d866113f2..b303c130bba 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -290,8 +290,8 @@ xpc_check_remote_hb(void) part = &xpc_partitions[partid]; - if (part->act_state == XPC_P_INACTIVE || - part->act_state == XPC_P_DEACTIVATING) { + if (part->act_state == XPC_P_AS_INACTIVE || + part->act_state == XPC_P_AS_DEACTIVATING) { continue; } @@ -406,7 +406,7 @@ xpc_initiate_discovery(void *ignore) static void xpc_channel_mgr(struct xpc_partition *part) { - while (part->act_state != XPC_P_DEACTIVATING || + while (part->act_state != XPC_P_AS_DEACTIVATING || atomic_read(&part->nchannels_active) > 0 || !xpc_partition_disengaged(part)) { @@ -429,7 +429,7 @@ xpc_channel_mgr(struct xpc_partition *part) (void)wait_event_interruptible(part->channel_mgr_wq, (atomic_read(&part->channel_mgr_requests) > 0 || part->chctl.all_flags != 0 || - (part->act_state == XPC_P_DEACTIVATING && + (part->act_state == XPC_P_AS_DEACTIVATING && atomic_read(&part->nchannels_active) == 0 && xpc_partition_disengaged(part)))); atomic_set(&part->channel_mgr_requests, 1); @@ -458,16 +458,16 @@ xpc_activating(void *__partid) spin_lock_irqsave(&part->act_lock, irq_flags); - if (part->act_state == XPC_P_DEACTIVATING) { - part->act_state = XPC_P_INACTIVE; + if (part->act_state == XPC_P_AS_DEACTIVATING) { + part->act_state = XPC_P_AS_INACTIVE; spin_unlock_irqrestore(&part->act_lock, irq_flags); part->remote_rp_pa = 0; return 0; } /* indicate the thread is activating */ - DBUG_ON(part->act_state != XPC_P_ACTIVATION_REQ); - part->act_state = XPC_P_ACTIVATING; + DBUG_ON(part->act_state != XPC_P_AS_ACTIVATION_REQ); + part->act_state = XPC_P_AS_ACTIVATING; XPC_SET_REASON(part, 0, 0); spin_unlock_irqrestore(&part->act_lock, irq_flags); @@ -509,9 +509,9 @@ xpc_activate_partition(struct xpc_partition *part) spin_lock_irqsave(&part->act_lock, irq_flags); - DBUG_ON(part->act_state != XPC_P_INACTIVE); + DBUG_ON(part->act_state != XPC_P_AS_INACTIVE); - part->act_state = XPC_P_ACTIVATION_REQ; + part->act_state = XPC_P_AS_ACTIVATION_REQ; XPC_SET_REASON(part, xpCloneKThread, __LINE__); spin_unlock_irqrestore(&part->act_lock, irq_flags); @@ -520,7 +520,7 @@ xpc_activate_partition(struct xpc_partition *part) partid); if (IS_ERR(kthread)) { spin_lock_irqsave(&part->act_lock, irq_flags); - part->act_state = XPC_P_INACTIVE; + part->act_state = XPC_P_AS_INACTIVE; XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__); spin_unlock_irqrestore(&part->act_lock, irq_flags); } @@ -786,7 +786,7 @@ xpc_disconnect_wait(int ch_number) wakeup_channel_mgr = 0; if (ch->delayed_chctl_flags) { - if (part->act_state != XPC_P_DEACTIVATING) { + if (part->act_state != XPC_P_AS_DEACTIVATING) { spin_lock(&part->chctl_lock); part->chctl.flags[ch->number] |= ch->delayed_chctl_flags; @@ -846,7 +846,7 @@ xpc_do_exit(enum xp_retval reason) part = &xpc_partitions[partid]; if (xpc_partition_disengaged(part) && - part->act_state == XPC_P_INACTIVE) { + part->act_state == XPC_P_AS_INACTIVE) { continue; } @@ -962,7 +962,7 @@ xpc_die_deactivate(void) part = &xpc_partitions[partid]; if (xpc_partition_engaged(partid) || - part->act_state != XPC_P_INACTIVE) { + part->act_state != XPC_P_AS_INACTIVE) { xpc_request_partition_deactivation(part); xpc_indicate_partition_disengaged(part); } @@ -1113,7 +1113,7 @@ xpc_init(void) part->activate_IRQ_rcvd = 0; spin_lock_init(&part->act_lock); - part->act_state = XPC_P_INACTIVE; + part->act_state = XPC_P_AS_INACTIVE; XPC_SET_REASON(part, 0, 0); init_timer(&part->disengage_timer); @@ -1121,7 +1121,7 @@ xpc_init(void) xpc_timeout_partition_disengage; part->disengage_timer.data = (unsigned long)part; - part->setup_state = XPC_P_UNSET; + part->setup_state = XPC_P_SS_UNSET; init_waitqueue_head(&part->teardown_wq); atomic_set(&part->references, 0); } diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index f150dbfcfcc..b5fb2164113 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -273,9 +273,9 @@ xpc_partition_disengaged(struct xpc_partition *part) if (!in_interrupt()) del_singleshot_timer_sync(&part->disengage_timer); - DBUG_ON(part->act_state != XPC_P_DEACTIVATING && - part->act_state != XPC_P_INACTIVE); - if (part->act_state != XPC_P_INACTIVE) + DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING && + part->act_state != XPC_P_AS_INACTIVE); + if (part->act_state != XPC_P_AS_INACTIVE) xpc_wakeup_channel_mgr(part); xpc_cancel_partition_deactivation_request(part); @@ -295,8 +295,8 @@ xpc_mark_partition_active(struct xpc_partition *part) dev_dbg(xpc_part, "setting partition %d to ACTIVE\n", XPC_PARTID(part)); spin_lock_irqsave(&part->act_lock, irq_flags); - if (part->act_state == XPC_P_ACTIVATING) { - part->act_state = XPC_P_ACTIVE; + if (part->act_state == XPC_P_AS_ACTIVATING) { + part->act_state = XPC_P_AS_ACTIVE; ret = xpSuccess; } else { DBUG_ON(part->reason == xpSuccess); @@ -318,7 +318,7 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, spin_lock_irqsave(&part->act_lock, irq_flags); - if (part->act_state == XPC_P_INACTIVE) { + if (part->act_state == XPC_P_AS_INACTIVE) { XPC_SET_REASON(part, reason, line); spin_unlock_irqrestore(&part->act_lock, irq_flags); if (reason == xpReactivating) { @@ -327,7 +327,7 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, } return; } - if (part->act_state == XPC_P_DEACTIVATING) { + if (part->act_state == XPC_P_AS_DEACTIVATING) { if ((part->reason == xpUnloading && reason != xpUnloading) || reason == xpReactivating) { XPC_SET_REASON(part, reason, line); @@ -336,7 +336,7 @@ xpc_deactivate_partition(const int line, struct xpc_partition *part, return; } - part->act_state = XPC_P_DEACTIVATING; + part->act_state = XPC_P_AS_DEACTIVATING; XPC_SET_REASON(part, reason, line); spin_unlock_irqrestore(&part->act_lock, irq_flags); @@ -367,7 +367,7 @@ xpc_mark_partition_inactive(struct xpc_partition *part) XPC_PARTID(part)); spin_lock_irqsave(&part->act_lock, irq_flags); - part->act_state = XPC_P_INACTIVE; + part->act_state = XPC_P_AS_INACTIVE; spin_unlock_irqrestore(&part->act_lock, irq_flags); part->remote_rp_pa = 0; } diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index d34cdd533a9..d1ccadc0857 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -327,7 +327,7 @@ xpc_send_notify_IRQ_sn2(struct xpc_channel *ch, u8 chctl_flag, union xpc_channel_ctl_flags chctl = { 0 }; enum xp_retval ret; - if (likely(part->act_state != XPC_P_DEACTIVATING)) { + if (likely(part->act_state != XPC_P_AS_DEACTIVATING)) { chctl.flags[ch->number] = chctl_flag; ret = xpc_send_IRQ_sn2(part_sn2->remote_chctl_amo_va, chctl.all_flags, @@ -975,7 +975,7 @@ xpc_identify_activate_IRQ_req_sn2(int nasid) remote_vars->heartbeat, remote_vars->heartbeating_to_mask[0]); if (xpc_partition_disengaged(part) && - part->act_state == XPC_P_INACTIVE) { + part->act_state == XPC_P_AS_INACTIVE) { xpc_update_partition_info_sn2(part, remote_rp_version, &remote_rp_ts_jiffies, @@ -1257,10 +1257,10 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) } /* - * With the setting of the partition setup_state to XPC_P_SETUP, we're - * declaring that this partition is ready to go. + * With the setting of the partition setup_state to XPC_P_SS_SETUP, + * we're declaring that this partition is ready to go. */ - part->setup_state = XPC_P_SETUP; + part->setup_state = XPC_P_SS_SETUP; /* * Setup the per partition specific variables required by the @@ -1323,8 +1323,8 @@ xpc_teardown_infrastructure_sn2(struct xpc_partition *part) DBUG_ON(atomic_read(&part->nchannels_engaged) != 0); DBUG_ON(atomic_read(&part->nchannels_active) != 0); - DBUG_ON(part->setup_state != XPC_P_SETUP); - part->setup_state = XPC_P_WTEARDOWN; + DBUG_ON(part->setup_state != XPC_P_SS_SETUP); + part->setup_state = XPC_P_SS_WTEARDOWN; xpc_vars_part_sn2[partid].magic = 0; @@ -1338,7 +1338,7 @@ xpc_teardown_infrastructure_sn2(struct xpc_partition *part) /* now we can begin tearing down the infrastructure */ - part->setup_state = XPC_P_TORNDOWN; + part->setup_state = XPC_P_SS_TORNDOWN; /* in case we've still got outstanding timers registered... */ del_timer_sync(&part_sn2->dropped_notify_IRQ_timer); @@ -1375,7 +1375,7 @@ xpc_pull_remote_cachelines_sn2(struct xpc_partition *part, void *dst, DBUG_ON((unsigned long)dst != L1_CACHE_ALIGN((unsigned long)dst)); DBUG_ON(cnt != L1_CACHE_ALIGN(cnt)); - if (part->act_state == XPC_P_DEACTIVATING) + if (part->act_state == XPC_P_AS_DEACTIVATING) return part->reason; ret = xp_remote_memcpy(xp_pa(dst), src_pa, cnt); @@ -1534,7 +1534,7 @@ xpc_make_first_contact_sn2(struct xpc_partition *part) /* wait a 1/4 of a second or so */ (void)msleep_interruptible(250); - if (part->act_state == XPC_P_DEACTIVATING) + if (part->act_state == XPC_P_AS_DEACTIVATING) return part->reason; } -- GitLab From 5b8669dfd110a62a74eea525a009342f73987ea0 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:18 -0700 Subject: [PATCH 0414/1024] sgi-xp: setup the activate GRU message queue Setup the activate GRU message queue that is used for partition activation and channel connection on UV systems. Signed-off-by: Dean Nelson Cc: Jack Steiner Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xp.h | 3 +- drivers/misc/sgi-xp/xp_uv.c | 10 + drivers/misc/sgi-xp/xpc.h | 158 ++++-- drivers/misc/sgi-xp/xpc_channel.c | 22 +- drivers/misc/sgi-xp/xpc_main.c | 329 +++++++++--- drivers/misc/sgi-xp/xpc_partition.c | 28 +- drivers/misc/sgi-xp/xpc_sn2.c | 387 ++++++-------- drivers/misc/sgi-xp/xpc_uv.c | 781 ++++++++++++++++++++++++++-- 8 files changed, 1328 insertions(+), 390 deletions(-) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 45d0a08c2dd..9ac5758f4d0 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -208,8 +208,9 @@ enum xp_retval { xpNeedMoreInfo, /* 57: more info is needed by SAL */ xpGruCopyError, /* 58: gru_copy_gru() returned error */ + xpGruSendMqError, /* 59: gru send message queue related error */ - xpUnknownReason /* 59: unknown reason - must be last in enum */ + xpUnknownReason /* 60: unknown reason - must be last in enum */ }; /* diff --git a/drivers/misc/sgi-xp/xp_uv.c b/drivers/misc/sgi-xp/xp_uv.c index 44f2c2b58c2..d9f7ce2510b 100644 --- a/drivers/misc/sgi-xp/xp_uv.c +++ b/drivers/misc/sgi-xp/xp_uv.c @@ -42,15 +42,25 @@ xp_remote_memcpy_uv(unsigned long dst_gpa, const unsigned long src_gpa, return xpGruCopyError; } +static int +xp_cpu_to_nasid_uv(int cpuid) +{ + /* ??? Is this same as sn2 nasid in mach/part bitmaps set up by SAL? */ + return UV_PNODE_TO_NASID(uv_cpu_to_pnode(cpuid)); +} + enum xp_retval xp_init_uv(void) { BUG_ON(!is_uv()); xp_max_npartitions = XP_MAX_NPARTITIONS_UV; + xp_partition_id = 0; /* !!! not correct value */ + xp_region_size = 0; /* !!! not correct value */ xp_pa = xp_pa_uv; xp_remote_memcpy = xp_remote_memcpy_uv; + xp_cpu_to_nasid = xp_cpu_to_nasid_uv; return xpSuccess; } diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 1e48f776505..4c26181deff 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -164,8 +164,8 @@ struct xpc_vars_part_sn2 { * MAGIC2 indicates that this partition has pulled the remote partititions * per partition variables that pertain to this partition. */ -#define XPC_VP_MAGIC1 0x0053524156435058L /* 'XPCVARS\0'L (little endian) */ -#define XPC_VP_MAGIC2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */ +#define XPC_VP_MAGIC1_SN2 0x0053524156435058L /* 'XPCVARS\0'L (little endian) */ +#define XPC_VP_MAGIC2_SN2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */ /* the reserved page sizes and offsets */ @@ -180,6 +180,80 @@ struct xpc_vars_part_sn2 { (XPC_RP_MACH_NASIDS(_rp) + \ xpc_nasid_mask_nlongs)) +/* + * The activate_mq is used to send/receive messages that affect XPC's heartbeat, + * partition active state, and channel state. This is UV only. + */ +struct xpc_activate_mq_msghdr_uv { + short partid; /* sender's partid */ + u8 act_state; /* sender's act_state at time msg sent */ + u8 type; /* message's type */ + unsigned long rp_ts_jiffies; /* timestamp of sender's rp setup by XPC */ +}; + +/* activate_mq defined message types */ +#define XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV 0 +#define XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV 1 +#define XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV 2 +#define XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV 3 + +#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV 4 +#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV 5 + +#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV 6 +#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV 7 +#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV 8 +#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV 9 + +#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 10 +#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 11 + +struct xpc_activate_mq_msg_uv { + struct xpc_activate_mq_msghdr_uv header; +}; + +struct xpc_activate_mq_msg_heartbeat_req_uv { + struct xpc_activate_mq_msghdr_uv header; + u64 heartbeat; +}; + +struct xpc_activate_mq_msg_activate_req_uv { + struct xpc_activate_mq_msghdr_uv header; + unsigned long rp_gpa; + unsigned long activate_mq_gpa; +}; + +struct xpc_activate_mq_msg_deactivate_req_uv { + struct xpc_activate_mq_msghdr_uv header; + enum xp_retval reason; +}; + +struct xpc_activate_mq_msg_chctl_closerequest_uv { + struct xpc_activate_mq_msghdr_uv header; + short ch_number; + enum xp_retval reason; +}; + +struct xpc_activate_mq_msg_chctl_closereply_uv { + struct xpc_activate_mq_msghdr_uv header; + short ch_number; +}; + +struct xpc_activate_mq_msg_chctl_openrequest_uv { + struct xpc_activate_mq_msghdr_uv header; + short ch_number; + short msg_size; /* size of notify_mq's messages */ + short local_nentries; /* ??? Is this needed? What is? */ +}; + +struct xpc_activate_mq_msg_chctl_openreply_uv { + struct xpc_activate_mq_msghdr_uv header; + short ch_number; + short remote_nentries; /* ??? Is this needed? What is? */ + short local_nentries; /* ??? Is this needed? What is? */ + unsigned long local_notify_mq_gpa; +}; + /* * Functions registered by add_timer() or called by kernel_thread() only * allow for a single 64-bit argument. The following macros can be used to @@ -331,6 +405,18 @@ struct xpc_notify { */ struct xpc_channel_sn2 { + struct xpc_openclose_args *local_openclose_args; /* args passed on */ + /* opening or closing of channel */ + + void *local_msgqueue_base; /* base address of kmalloc'd space */ + struct xpc_msg *local_msgqueue; /* local message queue */ + void *remote_msgqueue_base; /* base address of kmalloc'd space */ + struct xpc_msg *remote_msgqueue; /* cached copy of remote partition's */ + /* local message queue */ + unsigned long remote_msgqueue_pa; /* phys addr of remote partition's */ + /* local message queue */ + + struct xpc_notify *notify_queue; /* notify queue for messages sent */ /* various flavors of local and remote Get/Put values */ @@ -344,13 +430,14 @@ struct xpc_channel_sn2 { }; struct xpc_channel_uv { - /* !!! code is coming */ + unsigned long remote_notify_mq_gpa; /* gru phys address of remote */ + /* partition's notify mq */ }; struct xpc_channel { short partid; /* ID of remote partition connected */ spinlock_t lock; /* lock for updating this structure */ - u32 flags; /* general flags */ + unsigned int flags; /* general flags */ enum xp_retval reason; /* reason why channel is disconnect'g */ int reason_line; /* line# disconnect initiated from */ @@ -361,14 +448,6 @@ struct xpc_channel { u16 local_nentries; /* #of msg entries in local msg queue */ u16 remote_nentries; /* #of msg entries in remote msg queue */ - void *local_msgqueue_base; /* base address of kmalloc'd space */ - struct xpc_msg *local_msgqueue; /* local message queue */ - void *remote_msgqueue_base; /* base address of kmalloc'd space */ - struct xpc_msg *remote_msgqueue; /* cached copy of remote partition's */ - /* local message queue */ - unsigned long remote_msgqueue_pa; /* phys addr of remote partition's */ - /* local message queue */ - atomic_t references; /* #of external references to queues */ atomic_t n_on_msg_allocate_wq; /* #on msg allocation wait queue */ @@ -377,19 +456,13 @@ struct xpc_channel { u8 delayed_chctl_flags; /* chctl flags received, but delayed */ /* action until channel disconnected */ - /* queue of msg senders who want to be notified when msg received */ - atomic_t n_to_notify; /* #of msg senders to notify */ - struct xpc_notify *notify_queue; /* notify queue for messages sent */ xpc_channel_func func; /* user's channel function */ void *key; /* pointer to user's key */ struct completion wdisconnect_wait; /* wait for channel disconnect */ - struct xpc_openclose_args *local_openclose_args; /* args passed on */ - /* opening or closing of channel */ - /* kthread management related fields */ atomic_t kthreads_assigned; /* #of kthreads assigned to channel */ @@ -507,6 +580,8 @@ struct xpc_partition_sn2 { unsigned long remote_GPs_pa; /* phys addr of remote partition's local */ /* Get/Put values */ + void *local_openclose_args_base; /* base address of kmalloc'd space */ + struct xpc_openclose_args *local_openclose_args; /* local's args */ unsigned long remote_openclose_args_pa; /* phys addr of remote's args */ int notify_IRQ_nasid; /* nasid of where to send notify IRQs */ @@ -520,9 +595,27 @@ struct xpc_partition_sn2 { }; struct xpc_partition_uv { - /* !!! code is coming */ + unsigned long remote_activate_mq_gpa; /* gru phys address of remote */ + /* partition's activate mq */ + spinlock_t flags_lock; /* protect updating of flags */ + unsigned int flags; /* general flags */ + u8 remote_act_state; /* remote partition's act_state */ + u8 act_state_req; /* act_state request from remote partition */ + enum xp_retval reason; /* reason for deactivate act_state request */ + u64 heartbeat; /* incremented by remote partition */ }; +/* struct xpc_partition_uv flags */ + +#define XPC_P_HEARTBEAT_OFFLINE_UV 0x00000001 +#define XPC_P_ENGAGED_UV 0x00000002 + +/* struct xpc_partition_uv act_state change requests */ + +#define XPC_P_ASR_ACTIVATE_UV 0x01 +#define XPC_P_ASR_REACTIVATE_UV 0x02 +#define XPC_P_ASR_DEACTIVATE_UV 0x03 + struct xpc_partition { /* XPC HB infrastructure */ @@ -556,8 +649,6 @@ struct xpc_partition { union xpc_channel_ctl_flags chctl; /* chctl flags yet to be processed */ spinlock_t chctl_lock; /* chctl flags lock */ - void *local_openclose_args_base; /* base address of kmalloc'd space */ - struct xpc_openclose_args *local_openclose_args; /* local's args */ void *remote_openclose_args_base; /* base address of kmalloc'd space */ struct xpc_openclose_args *remote_openclose_args; /* copy of remote's */ /* args */ @@ -616,17 +707,20 @@ extern struct device *xpc_part; extern struct device *xpc_chan; extern int xpc_disengage_timelimit; extern int xpc_disengage_timedout; -extern atomic_t xpc_activate_IRQ_rcvd; +extern int xpc_activate_IRQ_rcvd; +extern spinlock_t xpc_activate_IRQ_rcvd_lock; extern wait_queue_head_t xpc_activate_IRQ_wq; extern void *xpc_heartbeating_to_mask; +extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **); extern void xpc_activate_partition(struct xpc_partition *); extern void xpc_activate_kthreads(struct xpc_channel *, int); extern void xpc_create_kthreads(struct xpc_channel *, int, int); extern void xpc_disconnect_wait(int); +extern int (*xpc_setup_partitions_sn) (void); extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *, u64 *, unsigned long *, size_t *); -extern enum xp_retval (*xpc_rsvd_page_init) (struct xpc_rsvd_page *); +extern int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *); extern void (*xpc_heartbeat_init) (void); extern void (*xpc_heartbeat_exit) (void); extern void (*xpc_increment_heartbeat) (void); @@ -635,8 +729,8 @@ extern void (*xpc_online_heartbeat) (void); extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *); extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *); extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *); -extern enum xp_retval (*xpc_allocate_msgqueues) (struct xpc_channel *); -extern void (*xpc_free_msgqueues) (struct xpc_channel *); +extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *); +extern void (*xpc_teardown_msg_structures) (struct xpc_channel *); extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *); extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int); extern int (*xpc_n_of_deliverable_msgs) (struct xpc_channel *); @@ -647,9 +741,9 @@ extern void (*xpc_request_partition_reactivation) (struct xpc_partition *); extern void (*xpc_request_partition_deactivation) (struct xpc_partition *); extern void (*xpc_cancel_partition_deactivation_request) ( struct xpc_partition *); -extern void (*xpc_process_activate_IRQ_rcvd) (int); -extern enum xp_retval (*xpc_setup_infrastructure) (struct xpc_partition *); -extern void (*xpc_teardown_infrastructure) (struct xpc_partition *); +extern void (*xpc_process_activate_IRQ_rcvd) (void); +extern enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *); +extern void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *); extern void (*xpc_indicate_partition_engaged) (struct xpc_partition *); extern int (*xpc_partition_engaged) (short); @@ -665,6 +759,9 @@ extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *, unsigned long *); extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *); +extern void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *, + unsigned long); + extern enum xp_retval (*xpc_send_msg) (struct xpc_channel *, u32, void *, u16, u8, xpc_notify_func, void *); extern void (*xpc_received_msg) (struct xpc_channel *, struct xpc_msg *); @@ -674,7 +771,7 @@ extern int xpc_init_sn2(void); extern void xpc_exit_sn2(void); /* found in xpc_uv.c */ -extern void xpc_init_uv(void); +extern int xpc_init_uv(void); extern void xpc_exit_uv(void); /* found in xpc_partition.c */ @@ -684,7 +781,8 @@ extern struct xpc_rsvd_page *xpc_rsvd_page; extern unsigned long *xpc_mach_nasids; extern struct xpc_partition *xpc_partitions; extern void *xpc_kmalloc_cacheline_aligned(size_t, gfp_t, void **); -extern struct xpc_rsvd_page *xpc_setup_rsvd_page(void); +extern int xpc_setup_rsvd_page(void); +extern void xpc_teardown_rsvd_page(void); extern int xpc_identify_activate_IRQ_sender(void); extern int xpc_partition_disengaged(struct xpc_partition *); extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *); diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 17ab75d69e8..73df9fb5ee6 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -39,7 +39,7 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (!(ch->flags & XPC_C_SETUP)) { spin_unlock_irqrestore(&ch->lock, *irq_flags); - ret = xpc_allocate_msgqueues(ch); + ret = xpc_setup_msg_structures(ch); spin_lock_irqsave(&ch->lock, *irq_flags); if (ret != xpSuccess) @@ -62,8 +62,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (!(ch->flags & XPC_C_ROPENREPLY)) return; - DBUG_ON(ch->remote_msgqueue_pa == 0); - ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP); /* clear all else */ dev_info(xpc_chan, "channel %d to partition %d connected\n", @@ -134,13 +132,23 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) spin_lock_irqsave(&ch->lock, *irq_flags); } + DBUG_ON(atomic_read(&ch->n_to_notify) != 0); + /* it's now safe to free the channel's message queues */ - xpc_free_msgqueues(ch); + xpc_teardown_msg_structures(ch); + + ch->func = NULL; + ch->key = NULL; + ch->msg_size = 0; + ch->local_nentries = 0; + ch->remote_nentries = 0; + ch->kthreads_assigned_limit = 0; + ch->kthreads_idle_limit = 0; /* * Mark the channel disconnected and clear all other flags, including - * XPC_C_SETUP (because of call to xpc_free_msgqueues()) but not - * including XPC_C_WDISCONNECT (if it was set). + * XPC_C_SETUP (because of call to xpc_teardown_msg_structures()) but + * not including XPC_C_WDISCONNECT (if it was set). */ ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT)); @@ -395,7 +403,7 @@ again: DBUG_ON(args->remote_nentries == 0); ch->flags |= XPC_C_ROPENREPLY; - ch->remote_msgqueue_pa = args->local_msgqueue_pa; + xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa); if (args->local_nentries < ch->remote_nentries) { dev_dbg(xpc_chan, "XPC_CHCTL_OPENREPLY: new " diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index b303c130bba..13ec4792899 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -141,8 +141,9 @@ static struct ctl_table_header *xpc_sysctl; /* non-zero if any remote partition disengage was timed out */ int xpc_disengage_timedout; -/* #of activate IRQs received */ -atomic_t xpc_activate_IRQ_rcvd = ATOMIC_INIT(0); +/* #of activate IRQs received and not yet processed */ +int xpc_activate_IRQ_rcvd; +DEFINE_SPINLOCK(xpc_activate_IRQ_rcvd_lock); /* IRQ handler notifies this wait queue on receipt of an IRQ */ DECLARE_WAIT_QUEUE_HEAD(xpc_activate_IRQ_wq); @@ -169,10 +170,11 @@ static struct notifier_block xpc_die_notifier = { .notifier_call = xpc_system_die, }; +int (*xpc_setup_partitions_sn) (void); enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie, unsigned long *rp_pa, size_t *len); -enum xp_retval (*xpc_rsvd_page_init) (struct xpc_rsvd_page *rp); +int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp); void (*xpc_heartbeat_init) (void); void (*xpc_heartbeat_exit) (void); void (*xpc_increment_heartbeat) (void); @@ -183,8 +185,8 @@ enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part); enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part); void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch); u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part); -enum xp_retval (*xpc_allocate_msgqueues) (struct xpc_channel *ch); -void (*xpc_free_msgqueues) (struct xpc_channel *ch); +enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch); +void (*xpc_teardown_msg_structures) (struct xpc_channel *ch); void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number); int (*xpc_n_of_deliverable_msgs) (struct xpc_channel *ch); struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *ch); @@ -196,9 +198,9 @@ void (*xpc_request_partition_reactivation) (struct xpc_partition *part); void (*xpc_request_partition_deactivation) (struct xpc_partition *part); void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part); -void (*xpc_process_activate_IRQ_rcvd) (int n_IRQs_expected); -enum xp_retval (*xpc_setup_infrastructure) (struct xpc_partition *part); -void (*xpc_teardown_infrastructure) (struct xpc_partition *part); +void (*xpc_process_activate_IRQ_rcvd) (void); +enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *part); +void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *part); void (*xpc_indicate_partition_engaged) (struct xpc_partition *part); int (*xpc_partition_engaged) (short partid); @@ -215,6 +217,9 @@ void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch, void (*xpc_send_chctl_openreply) (struct xpc_channel *ch, unsigned long *irq_flags); +void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch, + unsigned long msgqueue_pa); + enum xp_retval (*xpc_send_msg) (struct xpc_channel *ch, u32 flags, void *payload, u16 payload_size, u8 notify_type, xpc_notify_func func, void *key); @@ -308,8 +313,6 @@ xpc_check_remote_hb(void) static int xpc_hb_checker(void *ignore) { - int last_IRQ_count = 0; - int new_IRQ_count; int force_IRQ = 0; /* this thread was marked active by xpc_hb_init() */ @@ -325,43 +328,37 @@ xpc_hb_checker(void *ignore) dev_dbg(xpc_part, "woke up with %d ticks rem; %d IRQs have " "been received\n", (int)(xpc_hb_check_timeout - jiffies), - atomic_read(&xpc_activate_IRQ_rcvd) - last_IRQ_count); + xpc_activate_IRQ_rcvd); /* checking of remote heartbeats is skewed by IRQ handling */ if (time_is_before_eq_jiffies(xpc_hb_check_timeout)) { + xpc_hb_check_timeout = jiffies + + (xpc_hb_check_interval * HZ); + dev_dbg(xpc_part, "checking remote heartbeats\n"); xpc_check_remote_hb(); /* - * We need to periodically recheck to ensure no - * IRQ/amo pairs have been missed. That check - * must always reset xpc_hb_check_timeout. + * On sn2 we need to periodically recheck to ensure no + * IRQ/amo pairs have been missed. */ - force_IRQ = 1; + if (is_shub()) + force_IRQ = 1; } /* check for outstanding IRQs */ - new_IRQ_count = atomic_read(&xpc_activate_IRQ_rcvd); - if (last_IRQ_count < new_IRQ_count || force_IRQ != 0) { + if (xpc_activate_IRQ_rcvd > 0 || force_IRQ != 0) { force_IRQ = 0; - - dev_dbg(xpc_part, "found an IRQ to process; will be " - "resetting xpc_hb_check_timeout\n"); - - xpc_process_activate_IRQ_rcvd(new_IRQ_count - - last_IRQ_count); - last_IRQ_count = new_IRQ_count; - - xpc_hb_check_timeout = jiffies + - (xpc_hb_check_interval * HZ); + dev_dbg(xpc_part, "processing activate IRQs " + "received\n"); + xpc_process_activate_IRQ_rcvd(); } /* wait for IRQ or timeout */ (void)wait_event_interruptible(xpc_activate_IRQ_wq, - (last_IRQ_count < atomic_read( - &xpc_activate_IRQ_rcvd) - || time_is_before_eq_jiffies( + (time_is_before_eq_jiffies( xpc_hb_check_timeout) || + xpc_activate_IRQ_rcvd > 0 || xpc_exiting)); } @@ -436,6 +433,153 @@ xpc_channel_mgr(struct xpc_partition *part) } } +/* + * Guarantee that the kzalloc'd memory is cacheline aligned. + */ +void * +xpc_kzalloc_cacheline_aligned(size_t size, gfp_t flags, void **base) +{ + /* see if kzalloc will give us cachline aligned memory by default */ + *base = kzalloc(size, flags); + if (*base == NULL) + return NULL; + + if ((u64)*base == L1_CACHE_ALIGN((u64)*base)) + return *base; + + kfree(*base); + + /* nope, we'll have to do it ourselves */ + *base = kzalloc(size + L1_CACHE_BYTES, flags); + if (*base == NULL) + return NULL; + + return (void *)L1_CACHE_ALIGN((u64)*base); +} + +/* + * Setup the channel structures necessary to support XPartition Communication + * between the specified remote partition and the local one. + */ +static enum xp_retval +xpc_setup_ch_structures(struct xpc_partition *part) +{ + enum xp_retval ret; + int ch_number; + struct xpc_channel *ch; + short partid = XPC_PARTID(part); + + /* + * Allocate all of the channel structures as a contiguous chunk of + * memory. + */ + DBUG_ON(part->channels != NULL); + part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS, + GFP_KERNEL); + if (part->channels == NULL) { + dev_err(xpc_chan, "can't get memory for channels\n"); + return xpNoMemory; + } + + /* allocate the remote open and close args */ + + part->remote_openclose_args = + xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, + GFP_KERNEL, &part-> + remote_openclose_args_base); + if (part->remote_openclose_args == NULL) { + dev_err(xpc_chan, "can't get memory for remote connect args\n"); + ret = xpNoMemory; + goto out_1; + } + + part->chctl.all_flags = 0; + spin_lock_init(&part->chctl_lock); + + atomic_set(&part->channel_mgr_requests, 1); + init_waitqueue_head(&part->channel_mgr_wq); + + part->nchannels = XPC_MAX_NCHANNELS; + + atomic_set(&part->nchannels_active, 0); + atomic_set(&part->nchannels_engaged, 0); + + for (ch_number = 0; ch_number < part->nchannels; ch_number++) { + ch = &part->channels[ch_number]; + + ch->partid = partid; + ch->number = ch_number; + ch->flags = XPC_C_DISCONNECTED; + + atomic_set(&ch->kthreads_assigned, 0); + atomic_set(&ch->kthreads_idle, 0); + atomic_set(&ch->kthreads_active, 0); + + atomic_set(&ch->references, 0); + atomic_set(&ch->n_to_notify, 0); + + spin_lock_init(&ch->lock); + init_completion(&ch->wdisconnect_wait); + + atomic_set(&ch->n_on_msg_allocate_wq, 0); + init_waitqueue_head(&ch->msg_allocate_wq); + init_waitqueue_head(&ch->idle_wq); + } + + ret = xpc_setup_ch_structures_sn(part); + if (ret != xpSuccess) + goto out_2; + + /* + * With the setting of the partition setup_state to XPC_P_SS_SETUP, + * we're declaring that this partition is ready to go. + */ + part->setup_state = XPC_P_SS_SETUP; + + return xpSuccess; + + /* setup of ch structures failed */ +out_2: + kfree(part->remote_openclose_args_base); + part->remote_openclose_args = NULL; +out_1: + kfree(part->channels); + part->channels = NULL; + return ret; +} + +/* + * Teardown the channel structures necessary to support XPartition Communication + * between the specified remote partition and the local one. + */ +static void +xpc_teardown_ch_structures(struct xpc_partition *part) +{ + DBUG_ON(atomic_read(&part->nchannels_engaged) != 0); + DBUG_ON(atomic_read(&part->nchannels_active) != 0); + + /* + * Make this partition inaccessible to local processes by marking it + * as no longer setup. Then wait before proceeding with the teardown + * until all existing references cease. + */ + DBUG_ON(part->setup_state != XPC_P_SS_SETUP); + part->setup_state = XPC_P_SS_WTEARDOWN; + + wait_event(part->teardown_wq, (atomic_read(&part->references) == 0)); + + /* now we can begin tearing down the infrastructure */ + + xpc_teardown_ch_structures_sn(part); + + kfree(part->remote_openclose_args_base); + part->remote_openclose_args = NULL; + kfree(part->channels); + part->channels = NULL; + + part->setup_state = XPC_P_SS_TORNDOWN; +} + /* * When XPC HB determines that a partition has come up, it will create a new * kthread and that kthread will call this function to attempt to set up the @@ -476,7 +620,7 @@ xpc_activating(void *__partid) xpc_allow_hb(partid); - if (xpc_setup_infrastructure(part) == xpSuccess) { + if (xpc_setup_ch_structures(part) == xpSuccess) { (void)xpc_part_ref(part); /* this will always succeed */ if (xpc_make_first_contact(part) == xpSuccess) { @@ -486,7 +630,7 @@ xpc_activating(void *__partid) } xpc_part_deref(part); - xpc_teardown_infrastructure(part); + xpc_teardown_ch_structures(part); } xpc_disallow_hb(partid); @@ -806,6 +950,56 @@ xpc_disconnect_wait(int ch_number) } } +static int +xpc_setup_partitions(void) +{ + short partid; + struct xpc_partition *part; + + xpc_partitions = kzalloc(sizeof(struct xpc_partition) * + xp_max_npartitions, GFP_KERNEL); + if (xpc_partitions == NULL) { + dev_err(xpc_part, "can't get memory for partition structure\n"); + return -ENOMEM; + } + + /* + * The first few fields of each entry of xpc_partitions[] need to + * be initialized now so that calls to xpc_connect() and + * xpc_disconnect() can be made prior to the activation of any remote + * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE + * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING + * PARTITION HAS BEEN ACTIVATED. + */ + for (partid = 0; partid < xp_max_npartitions; partid++) { + part = &xpc_partitions[partid]; + + DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part)); + + part->activate_IRQ_rcvd = 0; + spin_lock_init(&part->act_lock); + part->act_state = XPC_P_AS_INACTIVE; + XPC_SET_REASON(part, 0, 0); + + init_timer(&part->disengage_timer); + part->disengage_timer.function = + xpc_timeout_partition_disengage; + part->disengage_timer.data = (unsigned long)part; + + part->setup_state = XPC_P_SS_UNSET; + init_waitqueue_head(&part->teardown_wq); + atomic_set(&part->references, 0); + } + + return xpc_setup_partitions_sn(); +} + +static void +xpc_teardown_partitions(void) +{ + kfree(xpc_partitions); +} + static void xpc_do_exit(enum xp_retval reason) { @@ -892,8 +1086,7 @@ xpc_do_exit(enum xp_retval reason) DBUG_ON(xpc_any_partition_engaged()); DBUG_ON(xpc_any_hbs_allowed() != 0); - /* a zero timestamp indicates our rsvd page is not initialized */ - xpc_rsvd_page->ts_jiffies = 0; + xpc_teardown_rsvd_page(); if (reason == xpUnloading) { (void)unregister_die_notifier(&xpc_die_notifier); @@ -906,7 +1099,7 @@ xpc_do_exit(enum xp_retval reason) if (xpc_sysctl) unregister_sysctl_table(xpc_sysctl); - kfree(xpc_partitions); + xpc_teardown_partitions(); if (is_shub()) xpc_exit_sn2(); @@ -1062,8 +1255,6 @@ int __init xpc_init(void) { int ret; - short partid; - struct xpc_partition *part; struct task_struct *kthread; snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part"); @@ -1076,56 +1267,29 @@ xpc_init(void) * further to only support exactly 64 partitions on this * architecture, no less. */ - if (xp_max_npartitions != 64) - return -EINVAL; - - ret = xpc_init_sn2(); - if (ret != 0) - return ret; + if (xp_max_npartitions != 64) { + dev_err(xpc_part, "max #of partitions not set to 64\n"); + ret = -EINVAL; + } else { + ret = xpc_init_sn2(); + } } else if (is_uv()) { - xpc_init_uv(); + ret = xpc_init_uv(); } else { - return -ENODEV; + ret = -ENODEV; } - xpc_partitions = kzalloc(sizeof(struct xpc_partition) * - xp_max_npartitions, GFP_KERNEL); - if (xpc_partitions == NULL) { + if (ret != 0) + return ret; + + ret = xpc_setup_partitions(); + if (ret != 0) { dev_err(xpc_part, "can't get memory for partition structure\n"); - ret = -ENOMEM; goto out_1; } - /* - * The first few fields of each entry of xpc_partitions[] need to - * be initialized now so that calls to xpc_connect() and - * xpc_disconnect() can be made prior to the activation of any remote - * partition. NOTE THAT NONE OF THE OTHER FIELDS BELONGING TO THESE - * ENTRIES ARE MEANINGFUL UNTIL AFTER AN ENTRY'S CORRESPONDING - * PARTITION HAS BEEN ACTIVATED. - */ - for (partid = 0; partid < xp_max_npartitions; partid++) { - part = &xpc_partitions[partid]; - - DBUG_ON((u64)part != L1_CACHE_ALIGN((u64)part)); - - part->activate_IRQ_rcvd = 0; - spin_lock_init(&part->act_lock); - part->act_state = XPC_P_AS_INACTIVE; - XPC_SET_REASON(part, 0, 0); - - init_timer(&part->disengage_timer); - part->disengage_timer.function = - xpc_timeout_partition_disengage; - part->disengage_timer.data = (unsigned long)part; - - part->setup_state = XPC_P_SS_UNSET; - init_waitqueue_head(&part->teardown_wq); - atomic_set(&part->references, 0); - } - xpc_sysctl = register_sysctl_table(xpc_sys_dir); /* @@ -1133,10 +1297,9 @@ xpc_init(void) * other partitions to discover we are alive and establish initial * communications. */ - xpc_rsvd_page = xpc_setup_rsvd_page(); - if (xpc_rsvd_page == NULL) { + ret = xpc_setup_rsvd_page(); + if (ret != 0) { dev_err(xpc_part, "can't setup our reserved page\n"); - ret = -EBUSY; goto out_2; } @@ -1187,15 +1350,15 @@ xpc_init(void) /* initialization was not successful */ out_3: - /* a zero timestamp indicates our rsvd page is not initialized */ - xpc_rsvd_page->ts_jiffies = 0; + xpc_teardown_rsvd_page(); (void)unregister_die_notifier(&xpc_die_notifier); (void)unregister_reboot_notifier(&xpc_reboot_notifier); out_2: if (xpc_sysctl) unregister_sysctl_table(xpc_sysctl); - kfree(xpc_partitions); + + xpc_teardown_partitions(); out_1: if (is_shub()) xpc_exit_sn2(); diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c index b5fb2164113..6722f6fe4dc 100644 --- a/drivers/misc/sgi-xp/xpc_partition.c +++ b/drivers/misc/sgi-xp/xpc_partition.c @@ -73,6 +73,12 @@ xpc_get_rsvd_page_pa(int nasid) while (1) { + /* !!! rp_pa will need to be _gpa on UV. + * ??? So do we save it into the architecture specific parts + * ??? of the xpc_partition structure? Do we rename this + * ??? function or have two versions? Rename rp_pa for UV to + * ??? rp_gpa? + */ ret = xpc_get_partition_rsvd_page_pa(buf, &cookie, &rp_pa, &len); @@ -118,9 +124,10 @@ xpc_get_rsvd_page_pa(int nasid) * other partitions to discover we are alive and establish initial * communications. */ -struct xpc_rsvd_page * +int xpc_setup_rsvd_page(void) { + int ret; struct xpc_rsvd_page *rp; unsigned long rp_pa; unsigned long new_ts_jiffies; @@ -132,7 +139,7 @@ xpc_setup_rsvd_page(void) preempt_enable(); if (rp_pa == 0) { dev_err(xpc_part, "SAL failed to locate the reserved page\n"); - return NULL; + return -ESRCH; } rp = (struct xpc_rsvd_page *)__va(rp_pa); @@ -146,7 +153,7 @@ xpc_setup_rsvd_page(void) dev_err(xpc_part, "the reserved page's partid of %d is outside " "supported range (< 0 || >= %d)\n", rp->SAL_partid, xp_max_npartitions); - return NULL; + return -EINVAL; } rp->version = XPC_RP_VERSION; @@ -165,8 +172,9 @@ xpc_setup_rsvd_page(void) xpc_part_nasids = XPC_RP_PART_NASIDS(rp); xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp); - if (xpc_rsvd_page_init(rp) != xpSuccess) - return NULL; + ret = xpc_setup_rsvd_page_sn(rp); + if (ret != 0) + return ret; /* * Set timestamp of when reserved page was setup by XPC. @@ -178,7 +186,15 @@ xpc_setup_rsvd_page(void) new_ts_jiffies++; rp->ts_jiffies = new_ts_jiffies; - return rp; + xpc_rsvd_page = rp; + return 0; +} + +void +xpc_teardown_rsvd_page(void) +{ + /* a zero timestamp indicates our rsvd page is not initialized */ + xpc_rsvd_page->ts_jiffies = 0; } /* diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index d1ccadc0857..8b4b0653d9e 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -53,12 +53,19 @@ * Buffer used to store a local copy of portions of a remote partition's * reserved page (either its header and part_nasids mask, or its vars). */ -static char *xpc_remote_copy_buffer_sn2; static void *xpc_remote_copy_buffer_base_sn2; +static char *xpc_remote_copy_buffer_sn2; static struct xpc_vars_sn2 *xpc_vars_sn2; static struct xpc_vars_part_sn2 *xpc_vars_part_sn2; +static int +xpc_setup_partitions_sn_sn2(void) +{ + /* nothing needs to be done */ + return 0; +} + /* SH_IPI_ACCESS shub register value on startup */ static u64 xpc_sh1_IPI_access_sn2; static u64 xpc_sh2_IPI_access0_sn2; @@ -198,7 +205,12 @@ xpc_init_IRQ_amo_sn2(int index) static irqreturn_t xpc_handle_activate_IRQ_sn2(int irq, void *dev_id) { - atomic_inc(&xpc_activate_IRQ_rcvd); + unsigned long irq_flags; + + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + xpc_activate_IRQ_rcvd++; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + wake_up_interruptible(&xpc_activate_IRQ_wq); return IRQ_HANDLED; } @@ -222,6 +234,7 @@ xpc_send_activate_IRQ_sn2(unsigned long amos_page_pa, int from_nasid, static void xpc_send_local_activate_IRQ_sn2(int from_nasid) { + unsigned long irq_flags; struct amo *amos = (struct amo *)__va(xpc_vars_sn2->amos_page_pa + (XPC_ACTIVATE_IRQ_AMOS_SN2 * sizeof(struct amo))); @@ -230,7 +243,10 @@ xpc_send_local_activate_IRQ_sn2(int from_nasid) FETCHOP_STORE_OP(TO_AMO((u64)&amos[BIT_WORD(from_nasid / 2)].variable), FETCHOP_OR, BIT_MASK(from_nasid / 2)); - atomic_inc(&xpc_activate_IRQ_rcvd); + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + xpc_activate_IRQ_rcvd++; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + wake_up_interruptible(&xpc_activate_IRQ_wq); } @@ -375,7 +391,7 @@ static void xpc_send_chctl_closerequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags) { - struct xpc_openclose_args *args = ch->local_openclose_args; + struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args; args->reason = ch->reason; XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_CLOSEREQUEST, irq_flags); @@ -390,7 +406,7 @@ xpc_send_chctl_closereply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) static void xpc_send_chctl_openrequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags) { - struct xpc_openclose_args *args = ch->local_openclose_args; + struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args; args->msg_size = ch->msg_size; args->local_nentries = ch->local_nentries; @@ -400,11 +416,11 @@ xpc_send_chctl_openrequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags) static void xpc_send_chctl_openreply_sn2(struct xpc_channel *ch, unsigned long *irq_flags) { - struct xpc_openclose_args *args = ch->local_openclose_args; + struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args; args->remote_nentries = ch->remote_nentries; args->local_nentries = ch->local_nentries; - args->local_msgqueue_pa = xp_pa(ch->local_msgqueue); + args->local_msgqueue_pa = xp_pa(ch->sn.sn2.local_msgqueue); XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREPLY, irq_flags); } @@ -420,6 +436,13 @@ xpc_send_chctl_local_msgrequest_sn2(struct xpc_channel *ch) XPC_SEND_LOCAL_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_MSGREQUEST); } +static void +xpc_save_remote_msgqueue_pa_sn2(struct xpc_channel *ch, + unsigned long msgqueue_pa) +{ + ch->sn.sn2.remote_msgqueue_pa = msgqueue_pa; +} + /* * This next set of functions are used to keep track of when a partition is * potentially engaged in accessing memory belonging to another partition. @@ -489,6 +512,17 @@ xpc_indicate_partition_disengaged_sn2(struct xpc_partition *part) part_sn2->activate_IRQ_phys_cpuid); } +static void +xpc_assume_partition_disengaged_sn2(short partid) +{ + struct amo *amo = xpc_vars_sn2->amos_page + + XPC_ENGAGED_PARTITIONS_AMO_SN2; + + /* clear bit(s) based on partid mask in our partition's amo */ + FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, + ~BIT(partid)); +} + static int xpc_partition_engaged_sn2(short partid) { @@ -510,17 +544,6 @@ xpc_any_partition_engaged_sn2(void) return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_LOAD) != 0; } -static void -xpc_assume_partition_disengaged_sn2(short partid) -{ - struct amo *amo = xpc_vars_sn2->amos_page + - XPC_ENGAGED_PARTITIONS_AMO_SN2; - - /* clear bit(s) based on partid mask in our partition's amo */ - FETCHOP_STORE_OP(TO_AMO((u64)&amo->variable), FETCHOP_AND, - ~BIT(partid)); -} - /* original protection values for each node */ static u64 xpc_prot_vec_sn2[MAX_NUMNODES]; @@ -595,8 +618,8 @@ xpc_get_partition_rsvd_page_pa_sn2(void *buf, u64 *cookie, unsigned long *rp_pa, } -static enum xp_retval -xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) +static int +xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp) { struct amo *amos_page; int i; @@ -627,7 +650,7 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) amos_page = (struct amo *)TO_AMO(uncached_alloc_page(0, 1)); if (amos_page == NULL) { dev_err(xpc_part, "can't allocate page of amos\n"); - return xpNoMemory; + return -ENOMEM; } /* @@ -639,7 +662,7 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) dev_err(xpc_part, "can't allow amo operations\n"); uncached_free_page(__IA64_UNCACHED_OFFSET | TO_PHYS((u64)amos_page), 1); - return ret; + return -EPERM; } } @@ -665,7 +688,7 @@ xpc_rsvd_page_init_sn2(struct xpc_rsvd_page *rp) (void)xpc_init_IRQ_amo_sn2(XPC_ENGAGED_PARTITIONS_AMO_SN2); (void)xpc_init_IRQ_amo_sn2(XPC_DEACTIVATE_REQUEST_AMO_SN2); - return xpSuccess; + return 0; } static void @@ -1082,10 +1105,19 @@ xpc_identify_activate_IRQ_sender_sn2(void) } static void -xpc_process_activate_IRQ_rcvd_sn2(int n_IRQs_expected) +xpc_process_activate_IRQ_rcvd_sn2(void) { + unsigned long irq_flags; + int n_IRQs_expected; int n_IRQs_detected; + DBUG_ON(xpc_activate_IRQ_rcvd == 0); + + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + n_IRQs_expected = xpc_activate_IRQ_rcvd; + xpc_activate_IRQ_rcvd = 0; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + n_IRQs_detected = xpc_identify_activate_IRQ_sender_sn2(); if (n_IRQs_detected < n_IRQs_expected) { /* retry once to help avoid missing amo */ @@ -1094,116 +1126,63 @@ xpc_process_activate_IRQ_rcvd_sn2(int n_IRQs_expected) } /* - * Guarantee that the kzalloc'd memory is cacheline aligned. - */ -static void * -xpc_kzalloc_cacheline_aligned_sn2(size_t size, gfp_t flags, void **base) -{ - /* see if kzalloc will give us cachline aligned memory by default */ - *base = kzalloc(size, flags); - if (*base == NULL) - return NULL; - - if ((u64)*base == L1_CACHE_ALIGN((u64)*base)) - return *base; - - kfree(*base); - - /* nope, we'll have to do it ourselves */ - *base = kzalloc(size + L1_CACHE_BYTES, flags); - if (*base == NULL) - return NULL; - - return (void *)L1_CACHE_ALIGN((u64)*base); -} - -/* - * Setup the infrastructure necessary to support XPartition Communication - * between the specified remote partition and the local one. + * Setup the channel structures that are sn2 specific. */ static enum xp_retval -xpc_setup_infrastructure_sn2(struct xpc_partition *part) +xpc_setup_ch_structures_sn_sn2(struct xpc_partition *part) { struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; + struct xpc_channel_sn2 *ch_sn2; enum xp_retval retval; int ret; int cpuid; int ch_number; - struct xpc_channel *ch; struct timer_list *timer; short partid = XPC_PARTID(part); - /* - * Allocate all of the channel structures as a contiguous chunk of - * memory. - */ - DBUG_ON(part->channels != NULL); - part->channels = kzalloc(sizeof(struct xpc_channel) * XPC_MAX_NCHANNELS, - GFP_KERNEL); - if (part->channels == NULL) { - dev_err(xpc_chan, "can't get memory for channels\n"); - return xpNoMemory; - } - /* allocate all the required GET/PUT values */ part_sn2->local_GPs = - xpc_kzalloc_cacheline_aligned_sn2(XPC_GP_SIZE, GFP_KERNEL, - &part_sn2->local_GPs_base); + xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL, + &part_sn2->local_GPs_base); if (part_sn2->local_GPs == NULL) { dev_err(xpc_chan, "can't get memory for local get/put " "values\n"); - retval = xpNoMemory; - goto out_1; + return xpNoMemory; } part_sn2->remote_GPs = - xpc_kzalloc_cacheline_aligned_sn2(XPC_GP_SIZE, GFP_KERNEL, - &part_sn2->remote_GPs_base); + xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE, GFP_KERNEL, + &part_sn2->remote_GPs_base); if (part_sn2->remote_GPs == NULL) { dev_err(xpc_chan, "can't get memory for remote get/put " "values\n"); retval = xpNoMemory; - goto out_2; + goto out_1; } part_sn2->remote_GPs_pa = 0; /* allocate all the required open and close args */ - part->local_openclose_args = - xpc_kzalloc_cacheline_aligned_sn2(XPC_OPENCLOSE_ARGS_SIZE, - GFP_KERNEL, - &part->local_openclose_args_base); - if (part->local_openclose_args == NULL) { + part_sn2->local_openclose_args = + xpc_kzalloc_cacheline_aligned(XPC_OPENCLOSE_ARGS_SIZE, + GFP_KERNEL, &part_sn2-> + local_openclose_args_base); + if (part_sn2->local_openclose_args == NULL) { dev_err(xpc_chan, "can't get memory for local connect args\n"); retval = xpNoMemory; - goto out_3; - } - - part->remote_openclose_args = - xpc_kzalloc_cacheline_aligned_sn2(XPC_OPENCLOSE_ARGS_SIZE, - GFP_KERNEL, - &part->remote_openclose_args_base); - if (part->remote_openclose_args == NULL) { - dev_err(xpc_chan, "can't get memory for remote connect args\n"); - retval = xpNoMemory; - goto out_4; + goto out_2; } part_sn2->remote_openclose_args_pa = 0; part_sn2->local_chctl_amo_va = xpc_init_IRQ_amo_sn2(partid); - part->chctl.all_flags = 0; - spin_lock_init(&part->chctl_lock); part_sn2->notify_IRQ_nasid = 0; part_sn2->notify_IRQ_phys_cpuid = 0; part_sn2->remote_chctl_amo_va = NULL; - atomic_set(&part->channel_mgr_requests, 1); - init_waitqueue_head(&part->channel_mgr_wq); - sprintf(part_sn2->notify_IRQ_owner, "xpc%02d", partid); ret = request_irq(SGI_XPC_NOTIFY, xpc_handle_notify_IRQ_sn2, IRQF_SHARED, part_sn2->notify_IRQ_owner, @@ -1212,7 +1191,7 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) dev_err(xpc_chan, "can't register NOTIFY IRQ handler, " "errno=%d\n", -ret); retval = xpLackOfResources; - goto out_5; + goto out_3; } /* Setup a timer to check for dropped notify IRQs */ @@ -1224,44 +1203,16 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) timer->expires = jiffies + XPC_DROPPED_NOTIFY_IRQ_WAIT_INTERVAL; add_timer(timer); - part->nchannels = XPC_MAX_NCHANNELS; - - atomic_set(&part->nchannels_active, 0); - atomic_set(&part->nchannels_engaged, 0); - for (ch_number = 0; ch_number < part->nchannels; ch_number++) { - ch = &part->channels[ch_number]; - - ch->partid = partid; - ch->number = ch_number; - ch->flags = XPC_C_DISCONNECTED; - - ch->sn.sn2.local_GP = &part_sn2->local_GPs[ch_number]; - ch->local_openclose_args = - &part->local_openclose_args[ch_number]; - - atomic_set(&ch->kthreads_assigned, 0); - atomic_set(&ch->kthreads_idle, 0); - atomic_set(&ch->kthreads_active, 0); + ch_sn2 = &part->channels[ch_number].sn.sn2; - atomic_set(&ch->references, 0); - atomic_set(&ch->n_to_notify, 0); + ch_sn2->local_GP = &part_sn2->local_GPs[ch_number]; + ch_sn2->local_openclose_args = + &part_sn2->local_openclose_args[ch_number]; - spin_lock_init(&ch->lock); - mutex_init(&ch->sn.sn2.msg_to_pull_mutex); - init_completion(&ch->wdisconnect_wait); - - atomic_set(&ch->n_on_msg_allocate_wq, 0); - init_waitqueue_head(&ch->msg_allocate_wq); - init_waitqueue_head(&ch->idle_wq); + mutex_init(&ch_sn2->msg_to_pull_mutex); } - /* - * With the setting of the partition setup_state to XPC_P_SS_SETUP, - * we're declaring that this partition is ready to go. - */ - part->setup_state = XPC_P_SS_SETUP; - /* * Setup the per partition specific variables required by the * remote partition to establish channel connections with us. @@ -1271,7 +1222,7 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) */ xpc_vars_part_sn2[partid].GPs_pa = xp_pa(part_sn2->local_GPs); xpc_vars_part_sn2[partid].openclose_args_pa = - xp_pa(part->local_openclose_args); + xp_pa(part_sn2->local_openclose_args); xpc_vars_part_sn2[partid].chctl_amo_pa = xp_pa(part_sn2->local_chctl_amo_va); cpuid = raw_smp_processor_id(); /* any CPU in this partition will do */ @@ -1279,80 +1230,48 @@ xpc_setup_infrastructure_sn2(struct xpc_partition *part) xpc_vars_part_sn2[partid].notify_IRQ_phys_cpuid = cpu_physical_id(cpuid); xpc_vars_part_sn2[partid].nchannels = part->nchannels; - xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC1; + xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC1_SN2; return xpSuccess; - /* setup of infrastructure failed */ -out_5: - kfree(part->remote_openclose_args_base); - part->remote_openclose_args = NULL; -out_4: - kfree(part->local_openclose_args_base); - part->local_openclose_args = NULL; + /* setup of ch structures failed */ out_3: + kfree(part_sn2->local_openclose_args_base); + part_sn2->local_openclose_args = NULL; +out_2: kfree(part_sn2->remote_GPs_base); part_sn2->remote_GPs = NULL; -out_2: +out_1: kfree(part_sn2->local_GPs_base); part_sn2->local_GPs = NULL; -out_1: - kfree(part->channels); - part->channels = NULL; return retval; } /* - * Teardown the infrastructure necessary to support XPartition Communication - * between the specified remote partition and the local one. + * Teardown the channel structures that are sn2 specific. */ static void -xpc_teardown_infrastructure_sn2(struct xpc_partition *part) +xpc_teardown_ch_structures_sn_sn2(struct xpc_partition *part) { struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2; short partid = XPC_PARTID(part); /* - * We start off by making this partition inaccessible to local - * processes by marking it as no longer setup. Then we make it - * inaccessible to remote processes by clearing the XPC per partition - * specific variable's magic # (which indicates that these variables - * are no longer valid) and by ignoring all XPC notify IRQs sent to - * this partition. + * Indicate that the variables specific to the remote partition are no + * longer available for its use. */ - - DBUG_ON(atomic_read(&part->nchannels_engaged) != 0); - DBUG_ON(atomic_read(&part->nchannels_active) != 0); - DBUG_ON(part->setup_state != XPC_P_SS_SETUP); - part->setup_state = XPC_P_SS_WTEARDOWN; - xpc_vars_part_sn2[partid].magic = 0; - free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid); - - /* - * Before proceeding with the teardown we have to wait until all - * existing references cease. - */ - wait_event(part->teardown_wq, (atomic_read(&part->references) == 0)); - - /* now we can begin tearing down the infrastructure */ - - part->setup_state = XPC_P_SS_TORNDOWN; - /* in case we've still got outstanding timers registered... */ del_timer_sync(&part_sn2->dropped_notify_IRQ_timer); + free_irq(SGI_XPC_NOTIFY, (void *)(u64)partid); - kfree(part->remote_openclose_args_base); - part->remote_openclose_args = NULL; - kfree(part->local_openclose_args_base); - part->local_openclose_args = NULL; + kfree(part_sn2->local_openclose_args_base); + part_sn2->local_openclose_args = NULL; kfree(part_sn2->remote_GPs_base); part_sn2->remote_GPs = NULL; kfree(part_sn2->local_GPs_base); part_sn2->local_GPs = NULL; - kfree(part->channels); - part->channels = NULL; part_sn2->local_chctl_amo_va = NULL; } @@ -1429,8 +1348,8 @@ xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) /* see if they've been set up yet */ - if (pulled_entry->magic != XPC_VP_MAGIC1 && - pulled_entry->magic != XPC_VP_MAGIC2) { + if (pulled_entry->magic != XPC_VP_MAGIC1_SN2 && + pulled_entry->magic != XPC_VP_MAGIC2_SN2) { if (pulled_entry->magic != 0) { dev_dbg(xpc_chan, "partition %d's XPC vars_part for " @@ -1443,7 +1362,7 @@ xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) return xpRetry; } - if (xpc_vars_part_sn2[partid].magic == XPC_VP_MAGIC1) { + if (xpc_vars_part_sn2[partid].magic == XPC_VP_MAGIC1_SN2) { /* validate the variables */ @@ -1473,10 +1392,10 @@ xpc_pull_remote_vars_part_sn2(struct xpc_partition *part) /* let the other side know that we've pulled their variables */ - xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC2; + xpc_vars_part_sn2[partid].magic = XPC_VP_MAGIC2_SN2; } - if (pulled_entry->magic == XPC_VP_MAGIC1) + if (pulled_entry->magic == XPC_VP_MAGIC1_SN2) return xpRetry; return xpSuccess; @@ -1605,6 +1524,7 @@ xpc_get_chctl_all_flags_sn2(struct xpc_partition *part) static enum xp_retval xpc_allocate_local_msgqueue_sn2(struct xpc_channel *ch) { + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; unsigned long irq_flags; int nentries; size_t nbytes; @@ -1612,17 +1532,17 @@ xpc_allocate_local_msgqueue_sn2(struct xpc_channel *ch) for (nentries = ch->local_nentries; nentries > 0; nentries--) { nbytes = nentries * ch->msg_size; - ch->local_msgqueue = - xpc_kzalloc_cacheline_aligned_sn2(nbytes, GFP_KERNEL, - &ch->local_msgqueue_base); - if (ch->local_msgqueue == NULL) + ch_sn2->local_msgqueue = + xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL, + &ch_sn2->local_msgqueue_base); + if (ch_sn2->local_msgqueue == NULL) continue; nbytes = nentries * sizeof(struct xpc_notify); - ch->notify_queue = kzalloc(nbytes, GFP_KERNEL); - if (ch->notify_queue == NULL) { - kfree(ch->local_msgqueue_base); - ch->local_msgqueue = NULL; + ch_sn2->notify_queue = kzalloc(nbytes, GFP_KERNEL); + if (ch_sn2->notify_queue == NULL) { + kfree(ch_sn2->local_msgqueue_base); + ch_sn2->local_msgqueue = NULL; continue; } @@ -1649,6 +1569,7 @@ xpc_allocate_local_msgqueue_sn2(struct xpc_channel *ch) static enum xp_retval xpc_allocate_remote_msgqueue_sn2(struct xpc_channel *ch) { + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; unsigned long irq_flags; int nentries; size_t nbytes; @@ -1658,10 +1579,10 @@ xpc_allocate_remote_msgqueue_sn2(struct xpc_channel *ch) for (nentries = ch->remote_nentries; nentries > 0; nentries--) { nbytes = nentries * ch->msg_size; - ch->remote_msgqueue = - xpc_kzalloc_cacheline_aligned_sn2(nbytes, GFP_KERNEL, - &ch->remote_msgqueue_base); - if (ch->remote_msgqueue == NULL) + ch_sn2->remote_msgqueue = + xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL, &ch_sn2-> + remote_msgqueue_base); + if (ch_sn2->remote_msgqueue == NULL) continue; spin_lock_irqsave(&ch->lock, irq_flags); @@ -1687,8 +1608,9 @@ xpc_allocate_remote_msgqueue_sn2(struct xpc_channel *ch) * Note: Assumes all of the channel sizes are filled in. */ static enum xp_retval -xpc_allocate_msgqueues_sn2(struct xpc_channel *ch) +xpc_setup_msg_structures_sn2(struct xpc_channel *ch) { + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; enum xp_retval ret; DBUG_ON(ch->flags & XPC_C_SETUP); @@ -1698,10 +1620,10 @@ xpc_allocate_msgqueues_sn2(struct xpc_channel *ch) ret = xpc_allocate_remote_msgqueue_sn2(ch); if (ret != xpSuccess) { - kfree(ch->local_msgqueue_base); - ch->local_msgqueue = NULL; - kfree(ch->notify_queue); - ch->notify_queue = NULL; + kfree(ch_sn2->local_msgqueue_base); + ch_sn2->local_msgqueue = NULL; + kfree(ch_sn2->notify_queue); + ch_sn2->notify_queue = NULL; } } return ret; @@ -1715,21 +1637,13 @@ xpc_allocate_msgqueues_sn2(struct xpc_channel *ch) * they're cleared when XPC_C_DISCONNECTED is cleared. */ static void -xpc_free_msgqueues_sn2(struct xpc_channel *ch) +xpc_teardown_msg_structures_sn2(struct xpc_channel *ch) { struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; DBUG_ON(!spin_is_locked(&ch->lock)); - DBUG_ON(atomic_read(&ch->n_to_notify) != 0); - ch->remote_msgqueue_pa = 0; - ch->func = NULL; - ch->key = NULL; - ch->msg_size = 0; - ch->local_nentries = 0; - ch->remote_nentries = 0; - ch->kthreads_assigned_limit = 0; - ch->kthreads_idle_limit = 0; + ch_sn2->remote_msgqueue_pa = 0; ch_sn2->local_GP->get = 0; ch_sn2->local_GP->put = 0; @@ -1745,12 +1659,12 @@ xpc_free_msgqueues_sn2(struct xpc_channel *ch) dev_dbg(xpc_chan, "ch->flags=0x%x, partid=%d, channel=%d\n", ch->flags, ch->partid, ch->number); - kfree(ch->local_msgqueue_base); - ch->local_msgqueue = NULL; - kfree(ch->remote_msgqueue_base); - ch->remote_msgqueue = NULL; - kfree(ch->notify_queue); - ch->notify_queue = NULL; + kfree(ch_sn2->local_msgqueue_base); + ch_sn2->local_msgqueue = NULL; + kfree(ch_sn2->remote_msgqueue_base); + ch_sn2->remote_msgqueue = NULL; + kfree(ch_sn2->notify_queue); + ch_sn2->notify_queue = NULL; } } @@ -1766,7 +1680,7 @@ xpc_notify_senders_sn2(struct xpc_channel *ch, enum xp_retval reason, s64 put) while (++get < put && atomic_read(&ch->n_to_notify) > 0) { - notify = &ch->notify_queue[get % ch->local_nentries]; + notify = &ch->sn.sn2.notify_queue[get % ch->local_nentries]; /* * See if the notify entry indicates it was associated with @@ -1818,7 +1732,7 @@ xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch) get = ch_sn2->w_remote_GP.get; do { - msg = (struct xpc_msg *)((u64)ch->local_msgqueue + + msg = (struct xpc_msg *)((u64)ch_sn2->local_msgqueue + (get % ch->local_nentries) * ch->msg_size); msg->flags = 0; @@ -1837,7 +1751,7 @@ xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch) put = ch_sn2->w_remote_GP.put; do { - msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + + msg = (struct xpc_msg *)((u64)ch_sn2->remote_msgqueue + (put % ch->remote_nentries) * ch->msg_size); msg->flags = 0; @@ -1976,8 +1890,9 @@ xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get) } msg_offset = msg_index * ch->msg_size; - msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset); - remote_msg_pa = ch->remote_msgqueue_pa + msg_offset; + msg = (struct xpc_msg *)((u64)ch_sn2->remote_msgqueue + + msg_offset); + remote_msg_pa = ch_sn2->remote_msgqueue_pa + msg_offset; ret = xpc_pull_remote_cachelines_sn2(part, msg, remote_msg_pa, nmsgs * ch->msg_size); @@ -2001,7 +1916,7 @@ xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get) /* return the message we were looking for */ msg_offset = (get % ch->remote_nentries) * ch->msg_size; - msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + msg_offset); + msg = (struct xpc_msg *)((u64)ch_sn2->remote_msgqueue + msg_offset); return msg; } @@ -2080,7 +1995,7 @@ xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) if (put == ch_sn2->w_local_GP.put) break; - msg = (struct xpc_msg *)((u64)ch->local_msgqueue + + msg = (struct xpc_msg *)((u64)ch_sn2->local_msgqueue + (put % ch->local_nentries) * ch->msg_size); @@ -2182,7 +2097,7 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, } /* get the message's address and initialize it */ - msg = (struct xpc_msg *)((u64)ch->local_msgqueue + + msg = (struct xpc_msg *)((u64)ch_sn2->local_msgqueue + (put % ch->local_nentries) * ch->msg_size); DBUG_ON(msg->flags != 0); @@ -2207,6 +2122,7 @@ xpc_send_msg_sn2(struct xpc_channel *ch, u32 flags, void *payload, void *key) { enum xp_retval ret = xpSuccess; + struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; struct xpc_msg *msg = msg; struct xpc_notify *notify = notify; s64 msg_number; @@ -2243,7 +2159,7 @@ xpc_send_msg_sn2(struct xpc_channel *ch, u32 flags, void *payload, atomic_inc(&ch->n_to_notify); - notify = &ch->notify_queue[msg_number % ch->local_nentries]; + notify = &ch_sn2->notify_queue[msg_number % ch->local_nentries]; notify->func = func; notify->key = key; notify->type = notify_type; @@ -2279,7 +2195,7 @@ xpc_send_msg_sn2(struct xpc_channel *ch, u32 flags, void *payload, /* see if the message is next in line to be sent, if so send it */ - put = ch->sn.sn2.local_GP->put; + put = ch_sn2->local_GP->put; if (put == msg_number) xpc_send_msgs_sn2(ch, put); @@ -2307,7 +2223,7 @@ xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) if (get == ch_sn2->w_local_GP.get) break; - msg = (struct xpc_msg *)((u64)ch->remote_msgqueue + + msg = (struct xpc_msg *)((u64)ch_sn2->remote_msgqueue + (get % ch->remote_nentries) * ch->msg_size); @@ -2385,8 +2301,9 @@ xpc_init_sn2(void) int ret; size_t buf_size; + xpc_setup_partitions_sn = xpc_setup_partitions_sn_sn2; xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2; - xpc_rsvd_page_init = xpc_rsvd_page_init_sn2; + xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2; xpc_increment_heartbeat = xpc_increment_heartbeat_sn2; xpc_offline_heartbeat = xpc_offline_heartbeat_sn2; xpc_online_heartbeat = xpc_online_heartbeat_sn2; @@ -2403,29 +2320,33 @@ xpc_init_sn2(void) xpc_cancel_partition_deactivation_request_sn2; xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2; - xpc_setup_infrastructure = xpc_setup_infrastructure_sn2; - xpc_teardown_infrastructure = xpc_teardown_infrastructure_sn2; + xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_sn2; + xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_sn2; xpc_make_first_contact = xpc_make_first_contact_sn2; + xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2; - xpc_allocate_msgqueues = xpc_allocate_msgqueues_sn2; - xpc_free_msgqueues = xpc_free_msgqueues_sn2; + xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2; + xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2; + xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2; + xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2; + + xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2; + + xpc_setup_msg_structures = xpc_setup_msg_structures_sn2; + xpc_teardown_msg_structures = xpc_teardown_msg_structures_sn2; + xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2; xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2; xpc_n_of_deliverable_msgs = xpc_n_of_deliverable_msgs_sn2; xpc_get_deliverable_msg = xpc_get_deliverable_msg_sn2; xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2; - xpc_partition_engaged = xpc_partition_engaged_sn2; - xpc_any_partition_engaged = xpc_any_partition_engaged_sn2; xpc_indicate_partition_disengaged = xpc_indicate_partition_disengaged_sn2; + xpc_partition_engaged = xpc_partition_engaged_sn2; + xpc_any_partition_engaged = xpc_any_partition_engaged_sn2; xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2; - xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2; - xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2; - xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2; - xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2; - xpc_send_msg = xpc_send_msg_sn2; xpc_received_msg = xpc_received_msg_sn2; diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index c2d4ddd6e95..689cb5c68cc 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -14,41 +14,528 @@ */ #include +#include +#include +#include +#include #include +#include "../sgi-gru/gru.h" #include "../sgi-gru/grukservices.h" #include "xpc.h" +static atomic64_t xpc_heartbeat_uv; static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV); -static void *xpc_activate_mq; +#define XPC_ACTIVATE_MSG_SIZE_UV (1 * GRU_CACHE_LINE_BYTES) +#define XPC_NOTIFY_MSG_SIZE_UV (2 * GRU_CACHE_LINE_BYTES) + +#define XPC_ACTIVATE_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \ + XPC_ACTIVATE_MSG_SIZE_UV) +#define XPC_NOTIFY_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \ + XPC_NOTIFY_MSG_SIZE_UV) + +static void *xpc_activate_mq_uv; +static void *xpc_notify_mq_uv; + +static int +xpc_setup_partitions_sn_uv(void) +{ + short partid; + struct xpc_partition_uv *part_uv; + + for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) { + part_uv = &xpc_partitions[partid].sn.uv; + + spin_lock_init(&part_uv->flags_lock); + part_uv->remote_act_state = XPC_P_AS_INACTIVE; + } + return 0; +} + +static void * +xpc_create_gru_mq_uv(unsigned int mq_size, int cpuid, unsigned int irq, + irq_handler_t irq_handler) +{ + int ret; + int nid; + int mq_order; + struct page *page; + void *mq; + + nid = cpu_to_node(cpuid); + mq_order = get_order(mq_size); + page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, + mq_order); + if (page == NULL) + return NULL; + + mq = page_address(page); + ret = gru_create_message_queue(mq, mq_size); + if (ret != 0) { + dev_err(xpc_part, "gru_create_message_queue() returned " + "error=%d\n", ret); + free_pages((unsigned long)mq, mq_order); + return NULL; + } + + /* !!! Need to do some other things to set up IRQ */ + + ret = request_irq(irq, irq_handler, 0, "xpc", NULL); + if (ret != 0) { + dev_err(xpc_part, "request_irq(irq=%d) returned error=%d\n", + irq, ret); + free_pages((unsigned long)mq, mq_order); + return NULL; + } + + /* !!! enable generation of irq when GRU mq op occurs to this mq */ + + /* ??? allow other partitions to access GRU mq? */ + + return mq; +} static void -xpc_send_local_activate_IRQ_uv(struct xpc_partition *part) +xpc_destroy_gru_mq_uv(void *mq, unsigned int mq_size, unsigned int irq) +{ + /* ??? disallow other partitions to access GRU mq? */ + + /* !!! disable generation of irq when GRU mq op occurs to this mq */ + + free_irq(irq, NULL); + + free_pages((unsigned long)mq, get_order(mq_size)); +} + +static enum xp_retval +xpc_send_gru_msg(unsigned long mq_gpa, void *msg, size_t msg_size) { + enum xp_retval xp_ret; + int ret; + + while (1) { + ret = gru_send_message_gpa(mq_gpa, msg, msg_size); + if (ret == MQE_OK) { + xp_ret = xpSuccess; + break; + } + + if (ret == MQE_QUEUE_FULL) { + dev_dbg(xpc_chan, "gru_send_message_gpa() returned " + "error=MQE_QUEUE_FULL\n"); + /* !!! handle QLimit reached; delay & try again */ + /* ??? Do we add a limit to the number of retries? */ + (void)msleep_interruptible(10); + } else if (ret == MQE_CONGESTION) { + dev_dbg(xpc_chan, "gru_send_message_gpa() returned " + "error=MQE_CONGESTION\n"); + /* !!! handle LB Overflow; simply try again */ + /* ??? Do we add a limit to the number of retries? */ + } else { + /* !!! Currently this is MQE_UNEXPECTED_CB_ERR */ + dev_err(xpc_chan, "gru_send_message_gpa() returned " + "error=%d\n", ret); + xp_ret = xpGruSendMqError; + break; + } + } + return xp_ret; +} + +static void +xpc_process_activate_IRQ_rcvd_uv(void) +{ + unsigned long irq_flags; + short partid; + struct xpc_partition *part; + u8 act_state_req; + + DBUG_ON(xpc_activate_IRQ_rcvd == 0); + + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) { + part = &xpc_partitions[partid]; + + if (part->sn.uv.act_state_req == 0) + continue; + + xpc_activate_IRQ_rcvd--; + BUG_ON(xpc_activate_IRQ_rcvd < 0); + + act_state_req = part->sn.uv.act_state_req; + part->sn.uv.act_state_req = 0; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + + if (act_state_req == XPC_P_ASR_ACTIVATE_UV) { + if (part->act_state == XPC_P_AS_INACTIVE) + xpc_activate_partition(part); + else if (part->act_state == XPC_P_AS_DEACTIVATING) + XPC_DEACTIVATE_PARTITION(part, xpReactivating); + + } else if (act_state_req == XPC_P_ASR_REACTIVATE_UV) { + if (part->act_state == XPC_P_AS_INACTIVE) + xpc_activate_partition(part); + else + XPC_DEACTIVATE_PARTITION(part, xpReactivating); + + } else if (act_state_req == XPC_P_ASR_DEACTIVATE_UV) { + XPC_DEACTIVATE_PARTITION(part, part->sn.uv.reason); + + } else { + BUG(); + } + + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + if (xpc_activate_IRQ_rcvd == 0) + break; + } + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + +} + +static irqreturn_t +xpc_handle_activate_IRQ_uv(int irq, void *dev_id) +{ + unsigned long irq_flags; + struct xpc_activate_mq_msghdr_uv *msg_hdr; + short partid; + struct xpc_partition *part; + struct xpc_partition_uv *part_uv; + struct xpc_openclose_args *args; + int wakeup_hb_checker = 0; + + while ((msg_hdr = gru_get_next_message(xpc_activate_mq_uv)) != NULL) { + + partid = msg_hdr->partid; + if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) { + dev_err(xpc_part, "xpc_handle_activate_IRQ_uv() invalid" + "partid=0x%x passed in message\n", partid); + gru_free_message(xpc_activate_mq_uv, msg_hdr); + continue; + } + part = &xpc_partitions[partid]; + part_uv = &part->sn.uv; + + part_uv->remote_act_state = msg_hdr->act_state; + + switch (msg_hdr->type) { + case XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV: + /* syncing of remote_act_state was just done above */ + break; + + case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: { + struct xpc_activate_mq_msg_heartbeat_req_uv *msg; + + msg = (struct xpc_activate_mq_msg_heartbeat_req_uv *) + msg_hdr; + part_uv->heartbeat = msg->heartbeat; + break; + } + case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: { + struct xpc_activate_mq_msg_heartbeat_req_uv *msg; + + msg = (struct xpc_activate_mq_msg_heartbeat_req_uv *) + msg_hdr; + part_uv->heartbeat = msg->heartbeat; + spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV; + spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); + break; + } + case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: { + struct xpc_activate_mq_msg_heartbeat_req_uv *msg; + + msg = (struct xpc_activate_mq_msg_heartbeat_req_uv *) + msg_hdr; + part_uv->heartbeat = msg->heartbeat; + spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV; + spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); + break; + } + case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: { + struct xpc_activate_mq_msg_activate_req_uv *msg; + + /* + * ??? Do we deal here with ts_jiffies being different + * ??? if act_state != XPC_P_AS_INACTIVE instead of + * ??? below? + */ + msg = (struct xpc_activate_mq_msg_activate_req_uv *) + msg_hdr; + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, + irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV; + part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */ + part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies; + part_uv->remote_activate_mq_gpa = msg->activate_mq_gpa; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, + irq_flags); + wakeup_hb_checker++; + break; + } + case XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV: { + struct xpc_activate_mq_msg_deactivate_req_uv *msg; + + msg = (struct xpc_activate_mq_msg_deactivate_req_uv *) + msg_hdr; + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, + irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV; + part_uv->reason = msg->reason; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, + irq_flags); + wakeup_hb_checker++; + break; + } + case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV: { + struct xpc_activate_mq_msg_chctl_closerequest_uv *msg; + + msg = (struct xpc_activate_mq_msg_chctl_closerequest_uv + *)msg_hdr; + args = &part->remote_openclose_args[msg->ch_number]; + args->reason = msg->reason; + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[msg->ch_number] |= + XPC_CHCTL_CLOSEREQUEST; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + xpc_wakeup_channel_mgr(part); + break; + } + case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV: { + struct xpc_activate_mq_msg_chctl_closereply_uv *msg; + + msg = (struct xpc_activate_mq_msg_chctl_closereply_uv *) + msg_hdr; + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[msg->ch_number] |= + XPC_CHCTL_CLOSEREPLY; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + xpc_wakeup_channel_mgr(part); + break; + } + case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV: { + struct xpc_activate_mq_msg_chctl_openrequest_uv *msg; + + msg = (struct xpc_activate_mq_msg_chctl_openrequest_uv + *)msg_hdr; + args = &part->remote_openclose_args[msg->ch_number]; + args->msg_size = msg->msg_size; + args->local_nentries = msg->local_nentries; + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[msg->ch_number] |= + XPC_CHCTL_OPENREQUEST; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + xpc_wakeup_channel_mgr(part); + break; + } + case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV: { + struct xpc_activate_mq_msg_chctl_openreply_uv *msg; + + msg = (struct xpc_activate_mq_msg_chctl_openreply_uv *) + msg_hdr; + args = &part->remote_openclose_args[msg->ch_number]; + args->remote_nentries = msg->remote_nentries; + args->local_nentries = msg->local_nentries; + args->local_msgqueue_pa = msg->local_notify_mq_gpa; + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[msg->ch_number] |= + XPC_CHCTL_OPENREPLY; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + xpc_wakeup_channel_mgr(part); + break; + } + case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV: + spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + part_uv->flags |= XPC_P_ENGAGED_UV; + spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); + break; + + case XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV: + spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + part_uv->flags &= ~XPC_P_ENGAGED_UV; + spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); + break; + + default: + dev_err(xpc_part, "received unknown activate_mq msg " + "type=%d from partition=%d\n", msg_hdr->type, + partid); + } + + if (msg_hdr->rp_ts_jiffies != part->remote_rp_ts_jiffies && + part->remote_rp_ts_jiffies != 0) { + /* + * ??? Does what we do here need to be sensitive to + * ??? act_state or remote_act_state? + */ + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, + irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = XPC_P_ASR_REACTIVATE_UV; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, + irq_flags); + wakeup_hb_checker++; + } + + gru_free_message(xpc_activate_mq_uv, msg_hdr); + } + + if (wakeup_hb_checker) + wake_up_interruptible(&xpc_activate_IRQ_wq); + + return IRQ_HANDLED; +} + +static enum xp_retval +xpc_send_activate_IRQ_uv(struct xpc_partition *part, void *msg, size_t msg_size, + int msg_type) +{ + struct xpc_activate_mq_msghdr_uv *msg_hdr = msg; + + DBUG_ON(msg_size > XPC_ACTIVATE_MSG_SIZE_UV); + + msg_hdr->type = msg_type; + msg_hdr->partid = XPC_PARTID(part); + msg_hdr->act_state = part->act_state; + msg_hdr->rp_ts_jiffies = xpc_rsvd_page->ts_jiffies; + + /* ??? Is holding a spin_lock (ch->lock) during this call a bad idea? */ + return xpc_send_gru_msg(part->sn.uv.remote_activate_mq_gpa, msg, + msg_size); +} + +static void +xpc_send_activate_IRQ_part_uv(struct xpc_partition *part, void *msg, + size_t msg_size, int msg_type) +{ + enum xp_retval ret; + + ret = xpc_send_activate_IRQ_uv(part, msg, msg_size, msg_type); + if (unlikely(ret != xpSuccess)) + XPC_DEACTIVATE_PARTITION(part, ret); +} + +static void +xpc_send_activate_IRQ_ch_uv(struct xpc_channel *ch, unsigned long *irq_flags, + void *msg, size_t msg_size, int msg_type) +{ + struct xpc_partition *part = &xpc_partitions[ch->number]; + enum xp_retval ret; + + ret = xpc_send_activate_IRQ_uv(part, msg, msg_size, msg_type); + if (unlikely(ret != xpSuccess)) { + if (irq_flags != NULL) + spin_unlock_irqrestore(&ch->lock, *irq_flags); + + XPC_DEACTIVATE_PARTITION(part, ret); + + if (irq_flags != NULL) + spin_lock_irqsave(&ch->lock, *irq_flags); + } +} + +static void +xpc_send_local_activate_IRQ_uv(struct xpc_partition *part, int act_state_req) +{ + unsigned long irq_flags; + struct xpc_partition_uv *part_uv = &part->sn.uv; + /* * !!! Make our side think that the remote parition sent an activate - * !!! message our way. Also do what the activate IRQ handler would + * !!! message our way by doing what the activate IRQ handler would * !!! do had one really been sent. */ + + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = act_state_req; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + + wake_up_interruptible(&xpc_activate_IRQ_wq); } static enum xp_retval -xpc_rsvd_page_init_uv(struct xpc_rsvd_page *rp) +xpc_get_partition_rsvd_page_pa_uv(void *buf, u64 *cookie, unsigned long *rp_pa, + size_t *len) { - /* !!! need to have established xpc_activate_mq earlier */ - rp->sn.activate_mq_gpa = uv_gpa(xpc_activate_mq); - return xpSuccess; + /* !!! call the UV version of sn_partition_reserved_page_pa() */ + return xpUnsupported; +} + +static int +xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp) +{ + rp->sn.activate_mq_gpa = uv_gpa(xpc_activate_mq_uv); + return 0; +} + +static void +xpc_send_heartbeat_uv(int msg_type) +{ + short partid; + struct xpc_partition *part; + struct xpc_activate_mq_msg_heartbeat_req_uv msg; + + /* + * !!! On uv we're broadcasting a heartbeat message every 5 seconds. + * !!! Whereas on sn2 we're bte_copy'ng the heartbeat info every 20 + * !!! seconds. This is an increase in numalink traffic. + * ??? Is this good? + */ + + msg.heartbeat = atomic64_inc_return(&xpc_heartbeat_uv); + + partid = find_first_bit(xpc_heartbeating_to_mask_uv, + XP_MAX_NPARTITIONS_UV); + + while (partid < XP_MAX_NPARTITIONS_UV) { + part = &xpc_partitions[partid]; + + xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg), + msg_type); + + partid = find_next_bit(xpc_heartbeating_to_mask_uv, + XP_MAX_NPARTITIONS_UV, partid + 1); + } } static void xpc_increment_heartbeat_uv(void) { - /* !!! send heartbeat msg to xpc_heartbeating_to_mask partids */ + xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV); +} + +static void +xpc_offline_heartbeat_uv(void) +{ + xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV); +} + +static void +xpc_online_heartbeat_uv(void) +{ + xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV); } static void xpc_heartbeat_init_uv(void) { + atomic64_set(&xpc_heartbeat_uv, 0); bitmap_zero(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV); xpc_heartbeating_to_mask = &xpc_heartbeating_to_mask_uv[0]; } @@ -56,48 +543,94 @@ xpc_heartbeat_init_uv(void) static void xpc_heartbeat_exit_uv(void) { - /* !!! send heartbeat_offline msg to xpc_heartbeating_to_mask partids */ + xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV); +} + +static enum xp_retval +xpc_get_remote_heartbeat_uv(struct xpc_partition *part) +{ + struct xpc_partition_uv *part_uv = &part->sn.uv; + enum xp_retval ret = xpNoHeartbeat; + + if (part_uv->remote_act_state != XPC_P_AS_INACTIVE && + part_uv->remote_act_state != XPC_P_AS_DEACTIVATING) { + + if (part_uv->heartbeat != part->last_heartbeat || + (part_uv->flags & XPC_P_HEARTBEAT_OFFLINE_UV)) { + + part->last_heartbeat = part_uv->heartbeat; + ret = xpSuccess; + } + } + return ret; } static void xpc_request_partition_activation_uv(struct xpc_rsvd_page *remote_rp, - unsigned long remote_rp_pa, int nasid) + unsigned long remote_rp_gpa, int nasid) { short partid = remote_rp->SAL_partid; struct xpc_partition *part = &xpc_partitions[partid]; + struct xpc_activate_mq_msg_activate_req_uv msg; -/* - * !!! Setup part structure with the bits of info we can glean from the rp: - * !!! part->remote_rp_pa = remote_rp_pa; - * !!! part->sn.uv.activate_mq_gpa = remote_rp->sn.activate_mq_gpa; - */ + part->remote_rp_pa = remote_rp_gpa; /* !!! _pa here is really _gpa */ + part->remote_rp_ts_jiffies = remote_rp->ts_jiffies; + part->sn.uv.remote_activate_mq_gpa = remote_rp->sn.activate_mq_gpa; + + /* + * ??? Is it a good idea to make this conditional on what is + * ??? potentially stale state information? + */ + if (part->sn.uv.remote_act_state == XPC_P_AS_INACTIVE) { + msg.rp_gpa = uv_gpa(xpc_rsvd_page); + msg.activate_mq_gpa = xpc_rsvd_page->sn.activate_mq_gpa; + xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV); + } - xpc_send_local_activate_IRQ_uv(part); + if (part->act_state == XPC_P_AS_INACTIVE) + xpc_send_local_activate_IRQ_uv(part, XPC_P_ASR_ACTIVATE_UV); } static void xpc_request_partition_reactivation_uv(struct xpc_partition *part) { - xpc_send_local_activate_IRQ_uv(part); + xpc_send_local_activate_IRQ_uv(part, XPC_P_ASR_ACTIVATE_UV); +} + +static void +xpc_request_partition_deactivation_uv(struct xpc_partition *part) +{ + struct xpc_activate_mq_msg_deactivate_req_uv msg; + + /* + * ??? Is it a good idea to make this conditional on what is + * ??? potentially stale state information? + */ + if (part->sn.uv.remote_act_state != XPC_P_AS_DEACTIVATING && + part->sn.uv.remote_act_state != XPC_P_AS_INACTIVE) { + + msg.reason = part->reason; + xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV); + } } /* - * Setup the infrastructure necessary to support XPartition Communication - * between the specified remote partition and the local one. + * Setup the channel structures that are uv specific. */ static enum xp_retval -xpc_setup_infrastructure_uv(struct xpc_partition *part) +xpc_setup_ch_structures_sn_uv(struct xpc_partition *part) { /* !!! this function needs fleshing out */ return xpUnsupported; } /* - * Teardown the infrastructure necessary to support XPartition Communication - * between the specified remote partition and the local one. + * Teardown the channel structures that are uv specific. */ static void -xpc_teardown_infrastructure_uv(struct xpc_partition *part) +xpc_teardown_ch_structures_sn_uv(struct xpc_partition *part) { /* !!! this function needs fleshing out */ return; @@ -106,15 +639,163 @@ xpc_teardown_infrastructure_uv(struct xpc_partition *part) static enum xp_retval xpc_make_first_contact_uv(struct xpc_partition *part) { - /* !!! this function needs fleshing out */ - return xpUnsupported; + struct xpc_activate_mq_msg_uv msg; + + /* + * We send a sync msg to get the remote partition's remote_act_state + * updated to our current act_state which at this point should + * be XPC_P_AS_ACTIVATING. + */ + xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV); + + while (part->sn.uv.remote_act_state != XPC_P_AS_ACTIVATING) { + + dev_dbg(xpc_part, "waiting to make first contact with " + "partition %d\n", XPC_PARTID(part)); + + /* wait a 1/4 of a second or so */ + (void)msleep_interruptible(250); + + if (part->act_state == XPC_P_AS_DEACTIVATING) + return part->reason; + } + + return xpSuccess; } static u64 xpc_get_chctl_all_flags_uv(struct xpc_partition *part) { + unsigned long irq_flags; + union xpc_channel_ctl_flags chctl; + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + chctl = part->chctl; + if (chctl.all_flags != 0) + part->chctl.all_flags = 0; + + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + return chctl.all_flags; +} + +static enum xp_retval +xpc_setup_msg_structures_uv(struct xpc_channel *ch) +{ + /* !!! this function needs fleshing out */ + return xpUnsupported; +} + +static void +xpc_teardown_msg_structures_uv(struct xpc_channel *ch) +{ + struct xpc_channel_uv *ch_uv = &ch->sn.uv; + + ch_uv->remote_notify_mq_gpa = 0; + /* !!! this function needs fleshing out */ - return 0UL; +} + +static void +xpc_send_chctl_closerequest_uv(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_activate_mq_msg_chctl_closerequest_uv msg; + + msg.ch_number = ch->number; + msg.reason = ch->reason; + xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV); +} + +static void +xpc_send_chctl_closereply_uv(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_activate_mq_msg_chctl_closereply_uv msg; + + msg.ch_number = ch->number; + xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV); +} + +static void +xpc_send_chctl_openrequest_uv(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_activate_mq_msg_chctl_openrequest_uv msg; + + msg.ch_number = ch->number; + msg.msg_size = ch->msg_size; + msg.local_nentries = ch->local_nentries; + xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV); +} + +static void +xpc_send_chctl_openreply_uv(struct xpc_channel *ch, unsigned long *irq_flags) +{ + struct xpc_activate_mq_msg_chctl_openreply_uv msg; + + msg.ch_number = ch->number; + msg.local_nentries = ch->local_nentries; + msg.remote_nentries = ch->remote_nentries; + msg.local_notify_mq_gpa = uv_gpa(xpc_notify_mq_uv); + xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV); +} + +static void +xpc_save_remote_msgqueue_pa_uv(struct xpc_channel *ch, + unsigned long msgqueue_pa) +{ + ch->sn.uv.remote_notify_mq_gpa = msgqueue_pa; +} + +static void +xpc_indicate_partition_engaged_uv(struct xpc_partition *part) +{ + struct xpc_activate_mq_msg_uv msg; + + xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV); +} + +static void +xpc_indicate_partition_disengaged_uv(struct xpc_partition *part) +{ + struct xpc_activate_mq_msg_uv msg; + + xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg), + XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV); +} + +static void +xpc_assume_partition_disengaged_uv(short partid) +{ + struct xpc_partition_uv *part_uv = &xpc_partitions[partid].sn.uv; + unsigned long irq_flags; + + spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + part_uv->flags &= ~XPC_P_ENGAGED_UV; + spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); +} + +static int +xpc_partition_engaged_uv(short partid) +{ + return (xpc_partitions[partid].sn.uv.flags & XPC_P_ENGAGED_UV) != 0; +} + +static int +xpc_any_partition_engaged_uv(void) +{ + struct xpc_partition_uv *part_uv; + short partid; + + for (partid = 0; partid < XP_MAX_NPARTITIONS_UV; partid++) { + part_uv = &xpc_partitions[partid].sn.uv; + if ((part_uv->flags & XPC_P_ENGAGED_UV) != 0) + return 1; + } + return 0; } static struct xpc_msg * @@ -124,24 +805,64 @@ xpc_get_deliverable_msg_uv(struct xpc_channel *ch) return NULL; } -void +int xpc_init_uv(void) { - xpc_rsvd_page_init = xpc_rsvd_page_init_uv; + xpc_setup_partitions_sn = xpc_setup_partitions_sn_uv; + xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv; + xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv; + xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv; xpc_increment_heartbeat = xpc_increment_heartbeat_uv; + xpc_offline_heartbeat = xpc_offline_heartbeat_uv; + xpc_online_heartbeat = xpc_online_heartbeat_uv; xpc_heartbeat_init = xpc_heartbeat_init_uv; xpc_heartbeat_exit = xpc_heartbeat_exit_uv; + xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_uv; + xpc_request_partition_activation = xpc_request_partition_activation_uv; xpc_request_partition_reactivation = xpc_request_partition_reactivation_uv; - xpc_setup_infrastructure = xpc_setup_infrastructure_uv; - xpc_teardown_infrastructure = xpc_teardown_infrastructure_uv; + xpc_request_partition_deactivation = + xpc_request_partition_deactivation_uv; + + xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_uv; + xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_uv; + xpc_make_first_contact = xpc_make_first_contact_uv; + xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_uv; + xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_uv; + xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv; + xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv; + xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv; + + xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv; + + xpc_setup_msg_structures = xpc_setup_msg_structures_uv; + xpc_teardown_msg_structures = xpc_teardown_msg_structures_uv; + + xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_uv; + xpc_indicate_partition_disengaged = + xpc_indicate_partition_disengaged_uv; + xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_uv; + xpc_partition_engaged = xpc_partition_engaged_uv; + xpc_any_partition_engaged = xpc_any_partition_engaged_uv; + xpc_get_deliverable_msg = xpc_get_deliverable_msg_uv; + + /* ??? The cpuid argument's value is 0, is that what we want? */ + /* !!! The irq argument's value isn't correct. */ + xpc_activate_mq_uv = xpc_create_gru_mq_uv(XPC_ACTIVATE_MQ_SIZE_UV, 0, 0, + xpc_handle_activate_IRQ_uv); + if (xpc_activate_mq_uv == NULL) + return -ENOMEM; + + return 0; } void xpc_exit_uv(void) { + /* !!! The irq argument's value isn't correct. */ + xpc_destroy_gru_mq_uv(xpc_activate_mq_uv, XPC_ACTIVATE_MQ_SIZE_UV, 0); } -- GitLab From bd3e64c1759e4930315ebf022611468ee9621486 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Tue, 29 Jul 2008 22:34:19 -0700 Subject: [PATCH 0415/1024] sgi-xp: setup the notify GRU message queue Setup the notify GRU message queue that is used for sending user messages on UV systems. Signed-off-by: Dean Nelson Cc: Jack Steiner Cc: "Luck, Tony" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/misc/sgi-xp/xp.h | 45 +- drivers/misc/sgi-xp/xp_main.c | 7 +- drivers/misc/sgi-xp/xpc.h | 140 +++-- drivers/misc/sgi-xp/xpc_channel.c | 63 +- drivers/misc/sgi-xp/xpc_main.c | 21 +- drivers/misc/sgi-xp/xpc_sn2.c | 178 +++--- drivers/misc/sgi-xp/xpc_uv.c | 951 ++++++++++++++++++++++++------ drivers/misc/sgi-xp/xpnet.c | 11 +- 8 files changed, 1032 insertions(+), 384 deletions(-) diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 9ac5758f4d0..859a5281c61 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -87,39 +87,18 @@ #endif /* - * The format of an XPC message is as follows: - * - * +-------+--------------------------------+ - * | flags |////////////////////////////////| - * +-------+--------------------------------+ - * | message # | - * +----------------------------------------+ - * | payload (user-defined message) | - * | | - * : - * | | - * +----------------------------------------+ - * - * The size of the payload is defined by the user via xpc_connect(). A user- - * defined message resides in the payload area. - * - * The size of a message entry (within a message queue) must be a cacheline - * sized multiple in order to facilitate the BTE transfer of messages from one - * message queue to another. A macro, XPC_MSG_SIZE(), is provided for the user + * Define macro, XPC_MSG_SIZE(), is provided for the user * that wants to fit as many msg entries as possible in a given memory size * (e.g. a memory page). */ -struct xpc_msg { - u8 flags; /* FOR XPC INTERNAL USE ONLY */ - u8 reserved[7]; /* FOR XPC INTERNAL USE ONLY */ - s64 number; /* FOR XPC INTERNAL USE ONLY */ - - u64 payload; /* user defined portion of message */ -}; +#define XPC_MSG_MAX_SIZE 128 +#define XPC_MSG_HDR_MAX_SIZE 16 +#define XPC_MSG_PAYLOAD_MAX_SIZE (XPC_MSG_MAX_SIZE - XPC_MSG_HDR_MAX_SIZE) -#define XPC_MSG_PAYLOAD_OFFSET (u64) (&((struct xpc_msg *)0)->payload) #define XPC_MSG_SIZE(_payload_size) \ - L1_CACHE_ALIGN(XPC_MSG_PAYLOAD_OFFSET + (_payload_size)) + ALIGN(XPC_MSG_HDR_MAX_SIZE + (_payload_size), \ + is_uv() ? 64 : 128) + /* * Define the return values and values passed to user's callout functions. @@ -210,7 +189,10 @@ enum xp_retval { xpGruCopyError, /* 58: gru_copy_gru() returned error */ xpGruSendMqError, /* 59: gru send message queue related error */ - xpUnknownReason /* 60: unknown reason - must be last in enum */ + xpBadChannelNumber, /* 60: invalid channel number */ + xpBadMsgType, /* 60: invalid message type */ + + xpUnknownReason /* 61: unknown reason - must be last in enum */ }; /* @@ -261,6 +243,9 @@ typedef void (*xpc_channel_func) (enum xp_retval reason, short partid, * calling xpc_received(). * * All other reason codes indicate failure. + * + * NOTE: The user defined function must be callable by an interrupt handler + * and thus cannot block. */ typedef void (*xpc_notify_func) (enum xp_retval reason, short partid, int ch_number, void *key); @@ -284,7 +269,7 @@ struct xpc_registration { xpc_channel_func func; /* function to call */ void *key; /* pointer to user's key */ u16 nentries; /* #of msg entries in local msg queue */ - u16 msg_size; /* message queue's message size */ + u16 entry_size; /* message queue's message entry size */ u32 assigned_limit; /* limit on #of assigned kthreads */ u32 idle_limit; /* limit on #of idle kthreads */ } ____cacheline_aligned; diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c index f86ad3af26b..66a1d19e08a 100644 --- a/drivers/misc/sgi-xp/xp_main.c +++ b/drivers/misc/sgi-xp/xp_main.c @@ -154,6 +154,9 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size, DBUG_ON(func == NULL); DBUG_ON(assigned_limit == 0 || idle_limit > assigned_limit); + if (XPC_MSG_SIZE(payload_size) > XPC_MSG_MAX_SIZE) + return xpPayloadTooBig; + registration = &xpc_registrations[ch_number]; if (mutex_lock_interruptible(®istration->mutex) != 0) @@ -166,7 +169,7 @@ xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size, } /* register the channel for connection */ - registration->msg_size = XPC_MSG_SIZE(payload_size); + registration->entry_size = XPC_MSG_SIZE(payload_size); registration->nentries = nentries; registration->assigned_limit = assigned_limit; registration->idle_limit = idle_limit; @@ -220,7 +223,7 @@ xpc_disconnect(int ch_number) registration->func = NULL; registration->key = NULL; registration->nentries = 0; - registration->msg_size = 0; + registration->entry_size = 0; registration->assigned_limit = 0; registration->idle_limit = 0; diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h index 4c26181deff..619208d6186 100644 --- a/drivers/misc/sgi-xp/xpc.h +++ b/drivers/misc/sgi-xp/xpc.h @@ -181,8 +181,8 @@ struct xpc_vars_part_sn2 { xpc_nasid_mask_nlongs)) /* - * The activate_mq is used to send/receive messages that affect XPC's heartbeat, - * partition active state, and channel state. This is UV only. + * The activate_mq is used to send/receive GRU messages that affect XPC's + * heartbeat, partition active state, and channel state. This is UV only. */ struct xpc_activate_mq_msghdr_uv { short partid; /* sender's partid */ @@ -209,45 +209,45 @@ struct xpc_activate_mq_msghdr_uv { #define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 11 struct xpc_activate_mq_msg_uv { - struct xpc_activate_mq_msghdr_uv header; + struct xpc_activate_mq_msghdr_uv hdr; }; struct xpc_activate_mq_msg_heartbeat_req_uv { - struct xpc_activate_mq_msghdr_uv header; + struct xpc_activate_mq_msghdr_uv hdr; u64 heartbeat; }; struct xpc_activate_mq_msg_activate_req_uv { - struct xpc_activate_mq_msghdr_uv header; + struct xpc_activate_mq_msghdr_uv hdr; unsigned long rp_gpa; unsigned long activate_mq_gpa; }; struct xpc_activate_mq_msg_deactivate_req_uv { - struct xpc_activate_mq_msghdr_uv header; + struct xpc_activate_mq_msghdr_uv hdr; enum xp_retval reason; }; struct xpc_activate_mq_msg_chctl_closerequest_uv { - struct xpc_activate_mq_msghdr_uv header; + struct xpc_activate_mq_msghdr_uv hdr; short ch_number; enum xp_retval reason; }; struct xpc_activate_mq_msg_chctl_closereply_uv { - struct xpc_activate_mq_msghdr_uv header; + struct xpc_activate_mq_msghdr_uv hdr; short ch_number; }; struct xpc_activate_mq_msg_chctl_openrequest_uv { - struct xpc_activate_mq_msghdr_uv header; + struct xpc_activate_mq_msghdr_uv hdr; short ch_number; - short msg_size; /* size of notify_mq's messages */ + short entry_size; /* size of notify_mq's GRU messages */ short local_nentries; /* ??? Is this needed? What is? */ }; struct xpc_activate_mq_msg_chctl_openreply_uv { - struct xpc_activate_mq_msghdr_uv header; + struct xpc_activate_mq_msghdr_uv hdr; short ch_number; short remote_nentries; /* ??? Is this needed? What is? */ short local_nentries; /* ??? Is this needed? What is? */ @@ -284,7 +284,7 @@ struct xpc_gp_sn2 { */ struct xpc_openclose_args { u16 reason; /* reason why channel is closing */ - u16 msg_size; /* sizeof each message entry */ + u16 entry_size; /* sizeof each message entry */ u16 remote_nentries; /* #of message entries in remote msg queue */ u16 local_nentries; /* #of message entries in local msg queue */ unsigned long local_msgqueue_pa; /* phys addr of local message queue */ @@ -294,22 +294,79 @@ struct xpc_openclose_args { L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * \ XPC_MAX_NCHANNELS) -/* struct xpc_msg flags */ -#define XPC_M_DONE 0x01 /* msg has been received/consumed */ -#define XPC_M_READY 0x02 /* msg is ready to be sent */ -#define XPC_M_INTERRUPT 0x04 /* send interrupt when msg consumed */ +/* + * Structures to define a fifo singly-linked list. + */ + +struct xpc_fifo_entry_uv { + struct xpc_fifo_entry_uv *next; +}; + +struct xpc_fifo_head_uv { + struct xpc_fifo_entry_uv *first; + struct xpc_fifo_entry_uv *last; + spinlock_t lock; + int n_entries; +}; + +/* + * Define a sn2 styled message. + * + * A user-defined message resides in the payload area. The max size of the + * payload is defined by the user via xpc_connect(). + * + * The size of a message entry (within a message queue) must be a 128-byte + * cacheline sized multiple in order to facilitate the BTE transfer of messages + * from one message queue to another. + */ +struct xpc_msg_sn2 { + u8 flags; /* FOR XPC INTERNAL USE ONLY */ + u8 reserved[7]; /* FOR XPC INTERNAL USE ONLY */ + s64 number; /* FOR XPC INTERNAL USE ONLY */ + + u64 payload; /* user defined portion of message */ +}; + +/* struct xpc_msg_sn2 flags */ + +#define XPC_M_SN2_DONE 0x01 /* msg has been received/consumed */ +#define XPC_M_SN2_READY 0x02 /* msg is ready to be sent */ +#define XPC_M_SN2_INTERRUPT 0x04 /* send interrupt when msg consumed */ + +/* + * The format of a uv XPC notify_mq GRU message is as follows: + * + * A user-defined message resides in the payload area. The max size of the + * payload is defined by the user via xpc_connect(). + * + * The size of a message (payload and header) sent via the GRU must be either 1 + * or 2 GRU_CACHE_LINE_BYTES in length. + */ -#define XPC_MSG_ADDRESS(_payload) \ - ((struct xpc_msg *)((u8 *)(_payload) - XPC_MSG_PAYLOAD_OFFSET)) +struct xpc_notify_mq_msghdr_uv { + union { + unsigned int gru_msg_hdr; /* FOR GRU INTERNAL USE ONLY */ + struct xpc_fifo_entry_uv next; /* FOR XPC INTERNAL USE ONLY */ + } u; + short partid; /* FOR XPC INTERNAL USE ONLY */ + u8 ch_number; /* FOR XPC INTERNAL USE ONLY */ + u8 size; /* FOR XPC INTERNAL USE ONLY */ + unsigned int msg_slot_number; /* FOR XPC INTERNAL USE ONLY */ +}; + +struct xpc_notify_mq_msg_uv { + struct xpc_notify_mq_msghdr_uv hdr; + unsigned long payload; +}; /* - * Defines notify entry. + * Define sn2's notify entry. * * This is used to notify a message's sender that their message was received * and consumed by the intended recipient. */ -struct xpc_notify { +struct xpc_notify_sn2 { u8 type; /* type of notification */ /* the following two fields are only used if type == XPC_N_CALL */ @@ -317,9 +374,20 @@ struct xpc_notify { void *key; /* pointer to user's key */ }; -/* struct xpc_notify type of notification */ +/* struct xpc_notify_sn2 type of notification */ -#define XPC_N_CALL 0x01 /* notify function provided by user */ +#define XPC_N_CALL 0x01 /* notify function provided by user */ + +/* + * Define uv's version of the notify entry. It additionally is used to allocate + * a msg slot on the remote partition into which is copied a sent message. + */ +struct xpc_send_msg_slot_uv { + struct xpc_fifo_entry_uv next; + unsigned int msg_slot_number; + xpc_notify_func func; /* user's notify function */ + void *key; /* pointer to user's key */ +}; /* * Define the structure that manages all the stuff required by a channel. In @@ -409,14 +477,14 @@ struct xpc_channel_sn2 { /* opening or closing of channel */ void *local_msgqueue_base; /* base address of kmalloc'd space */ - struct xpc_msg *local_msgqueue; /* local message queue */ + struct xpc_msg_sn2 *local_msgqueue; /* local message queue */ void *remote_msgqueue_base; /* base address of kmalloc'd space */ - struct xpc_msg *remote_msgqueue; /* cached copy of remote partition's */ - /* local message queue */ + struct xpc_msg_sn2 *remote_msgqueue; /* cached copy of remote */ + /* partition's local message queue */ unsigned long remote_msgqueue_pa; /* phys addr of remote partition's */ /* local message queue */ - struct xpc_notify *notify_queue; /* notify queue for messages sent */ + struct xpc_notify_sn2 *notify_queue;/* notify queue for messages sent */ /* various flavors of local and remote Get/Put values */ @@ -432,6 +500,12 @@ struct xpc_channel_sn2 { struct xpc_channel_uv { unsigned long remote_notify_mq_gpa; /* gru phys address of remote */ /* partition's notify mq */ + + struct xpc_send_msg_slot_uv *send_msg_slots; + struct xpc_notify_mq_msg_uv *recv_msg_slots; + + struct xpc_fifo_head_uv msg_slot_free_list; + struct xpc_fifo_head_uv recv_msg_list; /* deliverable payloads */ }; struct xpc_channel { @@ -444,7 +518,7 @@ struct xpc_channel { u16 number; /* channel # */ - u16 msg_size; /* sizeof each msg entry */ + u16 entry_size; /* sizeof each msg entry */ u16 local_nentries; /* #of msg entries in local msg queue */ u16 remote_nentries; /* #of msg entries in remote msg queue */ @@ -733,8 +807,8 @@ extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *); extern void (*xpc_teardown_msg_structures) (struct xpc_channel *); extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *); extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int); -extern int (*xpc_n_of_deliverable_msgs) (struct xpc_channel *); -extern struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *); +extern int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *); +extern void *(*xpc_get_deliverable_payload) (struct xpc_channel *); extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *, unsigned long, int); extern void (*xpc_request_partition_reactivation) (struct xpc_partition *); @@ -762,9 +836,9 @@ extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *); extern void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *, unsigned long); -extern enum xp_retval (*xpc_send_msg) (struct xpc_channel *, u32, void *, u16, - u8, xpc_notify_func, void *); -extern void (*xpc_received_msg) (struct xpc_channel *, struct xpc_msg *); +extern enum xp_retval (*xpc_send_payload) (struct xpc_channel *, u32, void *, + u16, u8, xpc_notify_func, void *); +extern void (*xpc_received_payload) (struct xpc_channel *, void *); /* found in xpc_sn2.c */ extern int xpc_init_sn2(void); @@ -805,7 +879,7 @@ extern enum xp_retval xpc_initiate_send_notify(short, int, u32, void *, u16, extern void xpc_initiate_received(short, int, void *); extern void xpc_process_sent_chctl_flags(struct xpc_partition *); extern void xpc_connected_callout(struct xpc_channel *); -extern void xpc_deliver_msg(struct xpc_channel *); +extern void xpc_deliver_payload(struct xpc_channel *); extern void xpc_disconnect_channel(const int, struct xpc_channel *, enum xp_retval, unsigned long *); extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval); diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 73df9fb5ee6..9cd2ebe2a3b 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -139,7 +139,7 @@ xpc_process_disconnect(struct xpc_channel *ch, unsigned long *irq_flags) ch->func = NULL; ch->key = NULL; - ch->msg_size = 0; + ch->entry_size = 0; ch->local_nentries = 0; ch->remote_nentries = 0; ch->kthreads_assigned_limit = 0; @@ -315,9 +315,9 @@ again: if (chctl_flags & XPC_CHCTL_OPENREQUEST) { - dev_dbg(xpc_chan, "XPC_CHCTL_OPENREQUEST (msg_size=%d, " + dev_dbg(xpc_chan, "XPC_CHCTL_OPENREQUEST (entry_size=%d, " "local_nentries=%d) received from partid=%d, " - "channel=%d\n", args->msg_size, args->local_nentries, + "channel=%d\n", args->entry_size, args->local_nentries, ch->partid, ch->number); if (part->act_state == XPC_P_AS_DEACTIVATING || @@ -338,10 +338,10 @@ again: /* * The meaningful OPENREQUEST connection state fields are: - * msg_size = size of channel's messages in bytes + * entry_size = size of channel's messages in bytes * local_nentries = remote partition's local_nentries */ - if (args->msg_size == 0 || args->local_nentries == 0) { + if (args->entry_size == 0 || args->local_nentries == 0) { /* assume OPENREQUEST was delayed by mistake */ spin_unlock_irqrestore(&ch->lock, irq_flags); return; @@ -351,14 +351,14 @@ again: ch->remote_nentries = args->local_nentries; if (ch->flags & XPC_C_OPENREQUEST) { - if (args->msg_size != ch->msg_size) { + if (args->entry_size != ch->entry_size) { XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes, &irq_flags); spin_unlock_irqrestore(&ch->lock, irq_flags); return; } } else { - ch->msg_size = args->msg_size; + ch->entry_size = args->entry_size; XPC_SET_REASON(ch, 0, 0); ch->flags &= ~XPC_C_DISCONNECTED; @@ -473,7 +473,7 @@ xpc_connect_channel(struct xpc_channel *ch) ch->local_nentries = registration->nentries; if (ch->flags & XPC_C_ROPENREQUEST) { - if (registration->msg_size != ch->msg_size) { + if (registration->entry_size != ch->entry_size) { /* the local and remote sides aren't the same */ /* @@ -492,7 +492,7 @@ xpc_connect_channel(struct xpc_channel *ch) return xpUnequalMsgSizes; } } else { - ch->msg_size = registration->msg_size; + ch->entry_size = registration->entry_size; XPC_SET_REASON(ch, 0, 0); ch->flags &= ~XPC_C_DISCONNECTED; @@ -859,8 +859,8 @@ xpc_initiate_send(short partid, int ch_number, u32 flags, void *payload, DBUG_ON(payload == NULL); if (xpc_part_ref(part)) { - ret = xpc_send_msg(&part->channels[ch_number], flags, payload, - payload_size, 0, NULL, NULL); + ret = xpc_send_payload(&part->channels[ch_number], flags, + payload, payload_size, 0, NULL, NULL); xpc_part_deref(part); } @@ -911,23 +911,24 @@ xpc_initiate_send_notify(short partid, int ch_number, u32 flags, void *payload, DBUG_ON(func == NULL); if (xpc_part_ref(part)) { - ret = xpc_send_msg(&part->channels[ch_number], flags, payload, - payload_size, XPC_N_CALL, func, key); + ret = xpc_send_payload(&part->channels[ch_number], flags, + payload, payload_size, XPC_N_CALL, func, + key); xpc_part_deref(part); } return ret; } /* - * Deliver a message to its intended recipient. + * Deliver a message's payload to its intended recipient. */ void -xpc_deliver_msg(struct xpc_channel *ch) +xpc_deliver_payload(struct xpc_channel *ch) { - struct xpc_msg *msg; + void *payload; - msg = xpc_get_deliverable_msg(ch); - if (msg != NULL) { + payload = xpc_get_deliverable_payload(ch); + if (payload != NULL) { /* * This ref is taken to protect the payload itself from being @@ -939,18 +940,16 @@ xpc_deliver_msg(struct xpc_channel *ch) atomic_inc(&ch->kthreads_active); if (ch->func != NULL) { - dev_dbg(xpc_chan, "ch->func() called, msg=0x%p, " - "msg_number=%ld, partid=%d, channel=%d\n", - msg, (signed long)msg->number, ch->partid, + dev_dbg(xpc_chan, "ch->func() called, payload=0x%p " + "partid=%d channel=%d\n", payload, ch->partid, ch->number); /* deliver the message to its intended recipient */ - ch->func(xpMsgReceived, ch->partid, ch->number, - &msg->payload, ch->key); + ch->func(xpMsgReceived, ch->partid, ch->number, payload, + ch->key); - dev_dbg(xpc_chan, "ch->func() returned, msg=0x%p, " - "msg_number=%ld, partid=%d, channel=%d\n", - msg, (signed long)msg->number, ch->partid, + dev_dbg(xpc_chan, "ch->func() returned, payload=0x%p " + "partid=%d channel=%d\n", payload, ch->partid, ch->number); } @@ -959,14 +958,11 @@ xpc_deliver_msg(struct xpc_channel *ch) } /* - * Acknowledge receipt of a delivered message. - * - * If a message has XPC_M_INTERRUPT set, send an interrupt to the partition - * that sent the message. + * Acknowledge receipt of a delivered message's payload. * * This function, although called by users, does not call xpc_part_ref() to * ensure that the partition infrastructure is in place. It relies on the - * fact that we called xpc_msgqueue_ref() in xpc_deliver_msg(). + * fact that we called xpc_msgqueue_ref() in xpc_deliver_payload(). * * Arguments: * @@ -980,14 +976,13 @@ xpc_initiate_received(short partid, int ch_number, void *payload) { struct xpc_partition *part = &xpc_partitions[partid]; struct xpc_channel *ch; - struct xpc_msg *msg = XPC_MSG_ADDRESS(payload); DBUG_ON(partid < 0 || partid >= xp_max_npartitions); DBUG_ON(ch_number < 0 || ch_number >= part->nchannels); ch = &part->channels[ch_number]; - xpc_received_msg(ch, msg); + xpc_received_payload(ch, payload); - /* the call to xpc_msgqueue_ref() was done by xpc_deliver_msg() */ + /* the call to xpc_msgqueue_ref() was done by xpc_deliver_payload() */ xpc_msgqueue_deref(ch); } diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 13ec4792899..46325fc8481 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -188,8 +188,8 @@ u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part); enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch); void (*xpc_teardown_msg_structures) (struct xpc_channel *ch); void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number); -int (*xpc_n_of_deliverable_msgs) (struct xpc_channel *ch); -struct xpc_msg *(*xpc_get_deliverable_msg) (struct xpc_channel *ch); +int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *ch); +void *(*xpc_get_deliverable_payload) (struct xpc_channel *ch); void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp, unsigned long remote_rp_pa, @@ -220,10 +220,11 @@ void (*xpc_send_chctl_openreply) (struct xpc_channel *ch, void (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch, unsigned long msgqueue_pa); -enum xp_retval (*xpc_send_msg) (struct xpc_channel *ch, u32 flags, - void *payload, u16 payload_size, u8 notify_type, - xpc_notify_func func, void *key); -void (*xpc_received_msg) (struct xpc_channel *ch, struct xpc_msg *msg); +enum xp_retval (*xpc_send_payload) (struct xpc_channel *ch, u32 flags, + void *payload, u16 payload_size, + u8 notify_type, xpc_notify_func func, + void *key); +void (*xpc_received_payload) (struct xpc_channel *ch, void *payload); /* * Timer function to enforce the timelimit on the partition disengage. @@ -714,9 +715,9 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch) do { /* deliver messages to their intended recipients */ - while (xpc_n_of_deliverable_msgs(ch) > 0 && + while (xpc_n_of_deliverable_payloads(ch) > 0 && !(ch->flags & XPC_C_DISCONNECTING)) { - xpc_deliver_msg(ch); + xpc_deliver_payload(ch); } if (atomic_inc_return(&ch->kthreads_idle) > @@ -730,7 +731,7 @@ xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch) "wait_event_interruptible_exclusive()\n"); (void)wait_event_interruptible_exclusive(ch->idle_wq, - (xpc_n_of_deliverable_msgs(ch) > 0 || + (xpc_n_of_deliverable_payloads(ch) > 0 || (ch->flags & XPC_C_DISCONNECTING))); atomic_dec(&ch->kthreads_idle); @@ -775,7 +776,7 @@ xpc_kthread_start(void *args) * additional kthreads to help deliver them. We only * need one less than total #of messages to deliver. */ - n_needed = xpc_n_of_deliverable_msgs(ch) - 1; + n_needed = xpc_n_of_deliverable_payloads(ch) - 1; if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING)) xpc_activate_kthreads(ch, n_needed); diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 8b4b0653d9e..b4882ccf634 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -408,7 +408,7 @@ xpc_send_chctl_openrequest_sn2(struct xpc_channel *ch, unsigned long *irq_flags) { struct xpc_openclose_args *args = ch->sn.sn2.local_openclose_args; - args->msg_size = ch->msg_size; + args->entry_size = ch->entry_size; args->local_nentries = ch->local_nentries; XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREQUEST, irq_flags); } @@ -1531,14 +1531,14 @@ xpc_allocate_local_msgqueue_sn2(struct xpc_channel *ch) for (nentries = ch->local_nentries; nentries > 0; nentries--) { - nbytes = nentries * ch->msg_size; + nbytes = nentries * ch->entry_size; ch_sn2->local_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL, &ch_sn2->local_msgqueue_base); if (ch_sn2->local_msgqueue == NULL) continue; - nbytes = nentries * sizeof(struct xpc_notify); + nbytes = nentries * sizeof(struct xpc_notify_sn2); ch_sn2->notify_queue = kzalloc(nbytes, GFP_KERNEL); if (ch_sn2->notify_queue == NULL) { kfree(ch_sn2->local_msgqueue_base); @@ -1578,7 +1578,7 @@ xpc_allocate_remote_msgqueue_sn2(struct xpc_channel *ch) for (nentries = ch->remote_nentries; nentries > 0; nentries--) { - nbytes = nentries * ch->msg_size; + nbytes = nentries * ch->entry_size; ch_sn2->remote_msgqueue = xpc_kzalloc_cacheline_aligned(nbytes, GFP_KERNEL, &ch_sn2-> remote_msgqueue_base); @@ -1632,9 +1632,6 @@ xpc_setup_msg_structures_sn2(struct xpc_channel *ch) /* * Free up message queues and other stuff that were allocated for the specified * channel. - * - * Note: ch->reason and ch->reason_line are left set for debugging purposes, - * they're cleared when XPC_C_DISCONNECTED is cleared. */ static void xpc_teardown_msg_structures_sn2(struct xpc_channel *ch) @@ -1674,7 +1671,7 @@ xpc_teardown_msg_structures_sn2(struct xpc_channel *ch) static void xpc_notify_senders_sn2(struct xpc_channel *ch, enum xp_retval reason, s64 put) { - struct xpc_notify *notify; + struct xpc_notify_sn2 *notify; u8 notify_type; s64 get = ch->sn.sn2.w_remote_GP.get - 1; @@ -1699,17 +1696,16 @@ xpc_notify_senders_sn2(struct xpc_channel *ch, enum xp_retval reason, s64 put) atomic_dec(&ch->n_to_notify); if (notify->func != NULL) { - dev_dbg(xpc_chan, "notify->func() called, notify=0x%p, " - "msg_number=%ld, partid=%d, channel=%d\n", + dev_dbg(xpc_chan, "notify->func() called, notify=0x%p " + "msg_number=%ld partid=%d channel=%d\n", (void *)notify, get, ch->partid, ch->number); notify->func(reason, ch->partid, ch->number, notify->key); - dev_dbg(xpc_chan, "notify->func() returned, " - "notify=0x%p, msg_number=%ld, partid=%d, " - "channel=%d\n", (void *)notify, get, - ch->partid, ch->number); + dev_dbg(xpc_chan, "notify->func() returned, notify=0x%p" + " msg_number=%ld partid=%d channel=%d\n", + (void *)notify, get, ch->partid, ch->number); } } } @@ -1727,14 +1723,14 @@ static inline void xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch) { struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; - struct xpc_msg *msg; + struct xpc_msg_sn2 *msg; s64 get; get = ch_sn2->w_remote_GP.get; do { - msg = (struct xpc_msg *)((u64)ch_sn2->local_msgqueue + - (get % ch->local_nentries) * - ch->msg_size); + msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue + + (get % ch->local_nentries) * + ch->entry_size); msg->flags = 0; } while (++get < ch_sn2->remote_GP.get); } @@ -1746,24 +1742,30 @@ static inline void xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch) { struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; - struct xpc_msg *msg; + struct xpc_msg_sn2 *msg; s64 put; put = ch_sn2->w_remote_GP.put; do { - msg = (struct xpc_msg *)((u64)ch_sn2->remote_msgqueue + - (put % ch->remote_nentries) * - ch->msg_size); + msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + + (put % ch->remote_nentries) * + ch->entry_size); msg->flags = 0; } while (++put < ch_sn2->remote_GP.put); } +static int +xpc_n_of_deliverable_payloads_sn2(struct xpc_channel *ch) +{ + return ch->sn.sn2.w_remote_GP.put - ch->sn.sn2.w_local_GP.get; +} + static void xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number) { struct xpc_channel *ch = &part->channels[ch_number]; struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; - int nmsgs_sent; + int npayloads_sent; ch_sn2->remote_GP = part->sn.sn2.remote_GPs[ch_number]; @@ -1835,7 +1837,7 @@ xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number) if (ch_sn2->w_remote_GP.put != ch_sn2->remote_GP.put) { /* * Clear msg->flags in previously received messages, so that - * they're ready for xpc_get_deliverable_msg(). + * they're ready for xpc_get_deliverable_payload_sn2(). */ xpc_clear_remote_msgqueue_flags_sn2(ch); @@ -1845,27 +1847,27 @@ xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number) "channel=%d\n", ch_sn2->w_remote_GP.put, ch->partid, ch->number); - nmsgs_sent = ch_sn2->w_remote_GP.put - ch_sn2->w_local_GP.get; - if (nmsgs_sent > 0) { + npayloads_sent = xpc_n_of_deliverable_payloads_sn2(ch); + if (npayloads_sent > 0) { dev_dbg(xpc_chan, "msgs waiting to be copied and " "delivered=%d, partid=%d, channel=%d\n", - nmsgs_sent, ch->partid, ch->number); + npayloads_sent, ch->partid, ch->number); if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) - xpc_activate_kthreads(ch, nmsgs_sent); + xpc_activate_kthreads(ch, npayloads_sent); } } xpc_msgqueue_deref(ch); } -static struct xpc_msg * +static struct xpc_msg_sn2 * xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get) { struct xpc_partition *part = &xpc_partitions[ch->partid]; struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; unsigned long remote_msg_pa; - struct xpc_msg *msg; + struct xpc_msg_sn2 *msg; u32 msg_index; u32 nmsgs; u64 msg_offset; @@ -1889,13 +1891,13 @@ xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get) nmsgs = ch->remote_nentries - msg_index; } - msg_offset = msg_index * ch->msg_size; - msg = (struct xpc_msg *)((u64)ch_sn2->remote_msgqueue + + msg_offset = msg_index * ch->entry_size; + msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + msg_offset); remote_msg_pa = ch_sn2->remote_msgqueue_pa + msg_offset; ret = xpc_pull_remote_cachelines_sn2(part, msg, remote_msg_pa, - nmsgs * ch->msg_size); + nmsgs * ch->entry_size); if (ret != xpSuccess) { dev_dbg(xpc_chan, "failed to pull %d msgs starting with" @@ -1915,26 +1917,21 @@ xpc_pull_remote_msg_sn2(struct xpc_channel *ch, s64 get) mutex_unlock(&ch_sn2->msg_to_pull_mutex); /* return the message we were looking for */ - msg_offset = (get % ch->remote_nentries) * ch->msg_size; - msg = (struct xpc_msg *)((u64)ch_sn2->remote_msgqueue + msg_offset); + msg_offset = (get % ch->remote_nentries) * ch->entry_size; + msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + msg_offset); return msg; } -static int -xpc_n_of_deliverable_msgs_sn2(struct xpc_channel *ch) -{ - return ch->sn.sn2.w_remote_GP.put - ch->sn.sn2.w_local_GP.get; -} - /* - * Get a message to be delivered. + * Get the next deliverable message's payload. */ -static struct xpc_msg * -xpc_get_deliverable_msg_sn2(struct xpc_channel *ch) +static void * +xpc_get_deliverable_payload_sn2(struct xpc_channel *ch) { struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; - struct xpc_msg *msg = NULL; + struct xpc_msg_sn2 *msg; + void *payload = NULL; s64 get; do { @@ -1965,15 +1962,16 @@ xpc_get_deliverable_msg_sn2(struct xpc_channel *ch) msg = xpc_pull_remote_msg_sn2(ch, get); DBUG_ON(msg != NULL && msg->number != get); - DBUG_ON(msg != NULL && (msg->flags & XPC_M_DONE)); - DBUG_ON(msg != NULL && !(msg->flags & XPC_M_READY)); + DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE)); + DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY)); + payload = &msg->payload; break; } } while (1); - return msg; + return payload; } /* @@ -1985,7 +1983,7 @@ static void xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) { struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; - struct xpc_msg *msg; + struct xpc_msg_sn2 *msg; s64 put = initial_put + 1; int send_msgrequest = 0; @@ -1995,11 +1993,12 @@ xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) if (put == ch_sn2->w_local_GP.put) break; - msg = (struct xpc_msg *)((u64)ch_sn2->local_msgqueue + - (put % ch->local_nentries) * - ch->msg_size); + msg = (struct xpc_msg_sn2 *)((u64)ch_sn2-> + local_msgqueue + (put % + ch->local_nentries) * + ch->entry_size); - if (!(msg->flags & XPC_M_READY)) + if (!(msg->flags & XPC_M_SN2_READY)) break; put++; @@ -2026,7 +2025,7 @@ xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) /* * We need to ensure that the message referenced by - * local_GP->put is not XPC_M_READY or that local_GP->put + * local_GP->put is not XPC_M_SN2_READY or that local_GP->put * equals w_local_GP.put, so we'll go have a look. */ initial_put = put; @@ -2042,10 +2041,10 @@ xpc_send_msgs_sn2(struct xpc_channel *ch, s64 initial_put) */ static enum xp_retval xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, - struct xpc_msg **address_of_msg) + struct xpc_msg_sn2 **address_of_msg) { struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; - struct xpc_msg *msg; + struct xpc_msg_sn2 *msg; enum xp_retval ret; s64 put; @@ -2097,8 +2096,9 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, } /* get the message's address and initialize it */ - msg = (struct xpc_msg *)((u64)ch_sn2->local_msgqueue + - (put % ch->local_nentries) * ch->msg_size); + msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue + + (put % ch->local_nentries) * + ch->entry_size); DBUG_ON(msg->flags != 0); msg->number = put; @@ -2117,20 +2117,20 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, * partition the message is being sent to. */ static enum xp_retval -xpc_send_msg_sn2(struct xpc_channel *ch, u32 flags, void *payload, - u16 payload_size, u8 notify_type, xpc_notify_func func, - void *key) +xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload, + u16 payload_size, u8 notify_type, xpc_notify_func func, + void *key) { enum xp_retval ret = xpSuccess; struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; - struct xpc_msg *msg = msg; - struct xpc_notify *notify = notify; + struct xpc_msg_sn2 *msg = msg; + struct xpc_notify_sn2 *notify = notify; s64 msg_number; s64 put; DBUG_ON(notify_type == XPC_N_CALL && func == NULL); - if (XPC_MSG_SIZE(payload_size) > ch->msg_size) + if (XPC_MSG_SIZE(payload_size) > ch->entry_size) return xpPayloadTooBig; xpc_msgqueue_ref(ch); @@ -2155,7 +2155,7 @@ xpc_send_msg_sn2(struct xpc_channel *ch, u32 flags, void *payload, * Tell the remote side to send an ACK interrupt when the * message has been delivered. */ - msg->flags |= XPC_M_INTERRUPT; + msg->flags |= XPC_M_SN2_INTERRUPT; atomic_inc(&ch->n_to_notify); @@ -2185,7 +2185,7 @@ xpc_send_msg_sn2(struct xpc_channel *ch, u32 flags, void *payload, memcpy(&msg->payload, payload, payload_size); - msg->flags |= XPC_M_READY; + msg->flags |= XPC_M_SN2_READY; /* * The preceding store of msg->flags must occur before the following @@ -2208,12 +2208,15 @@ out_1: * Now we actually acknowledge the messages that have been delivered and ack'd * by advancing the cached remote message queue's Get value and if requested * send a chctl msgrequest to the message sender's partition. + * + * If a message has XPC_M_SN2_INTERRUPT set, send an interrupt to the partition + * that sent the message. */ static void xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) { struct xpc_channel_sn2 *ch_sn2 = &ch->sn.sn2; - struct xpc_msg *msg; + struct xpc_msg_sn2 *msg; s64 get = initial_get + 1; int send_msgrequest = 0; @@ -2223,11 +2226,12 @@ xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) if (get == ch_sn2->w_local_GP.get) break; - msg = (struct xpc_msg *)((u64)ch_sn2->remote_msgqueue + - (get % ch->remote_nentries) * - ch->msg_size); + msg = (struct xpc_msg_sn2 *)((u64)ch_sn2-> + remote_msgqueue + (get % + ch->remote_nentries) * + ch->entry_size); - if (!(msg->flags & XPC_M_DONE)) + if (!(msg->flags & XPC_M_SN2_DONE)) break; msg_flags |= msg->flags; @@ -2251,11 +2255,11 @@ xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) dev_dbg(xpc_chan, "local_GP->get changed to %ld, partid=%d, " "channel=%d\n", get, ch->partid, ch->number); - send_msgrequest = (msg_flags & XPC_M_INTERRUPT); + send_msgrequest = (msg_flags & XPC_M_SN2_INTERRUPT); /* * We need to ensure that the message referenced by - * local_GP->get is not XPC_M_DONE or that local_GP->get + * local_GP->get is not XPC_M_SN2_DONE or that local_GP->get * equals w_local_GP.get, so we'll go have a look. */ initial_get = get; @@ -2266,19 +2270,23 @@ xpc_acknowledge_msgs_sn2(struct xpc_channel *ch, s64 initial_get, u8 msg_flags) } static void -xpc_received_msg_sn2(struct xpc_channel *ch, struct xpc_msg *msg) +xpc_received_payload_sn2(struct xpc_channel *ch, void *payload) { + struct xpc_msg_sn2 *msg; + s64 msg_number; s64 get; - s64 msg_number = msg->number; + + msg = container_of(payload, struct xpc_msg_sn2, payload); + msg_number = msg->number; dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n", (void *)msg, msg_number, ch->partid, ch->number); - DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->msg_size) != + DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) != msg_number % ch->remote_nentries); - DBUG_ON(msg->flags & XPC_M_DONE); + DBUG_ON(msg->flags & XPC_M_SN2_DONE); - msg->flags |= XPC_M_DONE; + msg->flags |= XPC_M_SN2_DONE; /* * The preceding store of msg->flags must occur before the following @@ -2337,8 +2345,8 @@ xpc_init_sn2(void) xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2; xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2; - xpc_n_of_deliverable_msgs = xpc_n_of_deliverable_msgs_sn2; - xpc_get_deliverable_msg = xpc_get_deliverable_msg_sn2; + xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2; + xpc_get_deliverable_payload = xpc_get_deliverable_payload_sn2; xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2; xpc_indicate_partition_disengaged = @@ -2347,8 +2355,14 @@ xpc_init_sn2(void) xpc_any_partition_engaged = xpc_any_partition_engaged_sn2; xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2; - xpc_send_msg = xpc_send_msg_sn2; - xpc_received_msg = xpc_received_msg_sn2; + xpc_send_payload = xpc_send_payload_sn2; + xpc_received_payload = xpc_received_payload_sn2; + + if (offsetof(struct xpc_msg_sn2, payload) > XPC_MSG_HDR_MAX_SIZE) { + dev_err(xpc_part, "header portion of struct xpc_msg_sn2 is " + "larger than %d\n", XPC_MSG_HDR_MAX_SIZE); + return -E2BIG; + } buf_size = max(XPC_RP_VARS_SIZE, XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES_SN2); diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 689cb5c68cc..1ac694c0162 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -66,8 +66,11 @@ xpc_create_gru_mq_uv(unsigned int mq_size, int cpuid, unsigned int irq, mq_order = get_order(mq_size); page = alloc_pages_node(nid, GFP_KERNEL | __GFP_ZERO | GFP_THISNODE, mq_order); - if (page == NULL) + if (page == NULL) { + dev_err(xpc_part, "xpc_create_gru_mq_uv() failed to alloc %d " + "bytes of memory on nid=%d for GRU mq\n", mq_size, nid); return NULL; + } mq = page_address(page); ret = gru_create_message_queue(mq, mq_size); @@ -193,202 +196,226 @@ xpc_process_activate_IRQ_rcvd_uv(void) } -static irqreturn_t -xpc_handle_activate_IRQ_uv(int irq, void *dev_id) +static void +xpc_handle_activate_mq_msg_uv(struct xpc_partition *part, + struct xpc_activate_mq_msghdr_uv *msg_hdr, + int *wakeup_hb_checker) { unsigned long irq_flags; - struct xpc_activate_mq_msghdr_uv *msg_hdr; - short partid; - struct xpc_partition *part; - struct xpc_partition_uv *part_uv; + struct xpc_partition_uv *part_uv = &part->sn.uv; struct xpc_openclose_args *args; - int wakeup_hb_checker = 0; - while ((msg_hdr = gru_get_next_message(xpc_activate_mq_uv)) != NULL) { + part_uv->remote_act_state = msg_hdr->act_state; - partid = msg_hdr->partid; - if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) { - dev_err(xpc_part, "xpc_handle_activate_IRQ_uv() invalid" - "partid=0x%x passed in message\n", partid); - gru_free_message(xpc_activate_mq_uv, msg_hdr); - continue; - } - part = &xpc_partitions[partid]; - part_uv = &part->sn.uv; + switch (msg_hdr->type) { + case XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV: + /* syncing of remote_act_state was just done above */ + break; - part_uv->remote_act_state = msg_hdr->act_state; + case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: { + struct xpc_activate_mq_msg_heartbeat_req_uv *msg; - switch (msg_hdr->type) { - case XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV: - /* syncing of remote_act_state was just done above */ - break; + msg = container_of(msg_hdr, + struct xpc_activate_mq_msg_heartbeat_req_uv, + hdr); + part_uv->heartbeat = msg->heartbeat; + break; + } + case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: { + struct xpc_activate_mq_msg_heartbeat_req_uv *msg; + + msg = container_of(msg_hdr, + struct xpc_activate_mq_msg_heartbeat_req_uv, + hdr); + part_uv->heartbeat = msg->heartbeat; + + spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV; + spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); + break; + } + case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: { + struct xpc_activate_mq_msg_heartbeat_req_uv *msg; + + msg = container_of(msg_hdr, + struct xpc_activate_mq_msg_heartbeat_req_uv, + hdr); + part_uv->heartbeat = msg->heartbeat; + + spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV; + spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); + break; + } + case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: { + struct xpc_activate_mq_msg_activate_req_uv *msg; - case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: { - struct xpc_activate_mq_msg_heartbeat_req_uv *msg; + /* + * ??? Do we deal here with ts_jiffies being different + * ??? if act_state != XPC_P_AS_INACTIVE instead of + * ??? below? + */ + msg = container_of(msg_hdr, struct + xpc_activate_mq_msg_activate_req_uv, hdr); - msg = (struct xpc_activate_mq_msg_heartbeat_req_uv *) - msg_hdr; - part_uv->heartbeat = msg->heartbeat; - break; - } - case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: { - struct xpc_activate_mq_msg_heartbeat_req_uv *msg; - - msg = (struct xpc_activate_mq_msg_heartbeat_req_uv *) - msg_hdr; - part_uv->heartbeat = msg->heartbeat; - spin_lock_irqsave(&part_uv->flags_lock, irq_flags); - part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV; - spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); - break; - } - case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: { - struct xpc_activate_mq_msg_heartbeat_req_uv *msg; - - msg = (struct xpc_activate_mq_msg_heartbeat_req_uv *) - msg_hdr; - part_uv->heartbeat = msg->heartbeat; - spin_lock_irqsave(&part_uv->flags_lock, irq_flags); - part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV; - spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); - break; - } - case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: { - struct xpc_activate_mq_msg_activate_req_uv *msg; - - /* - * ??? Do we deal here with ts_jiffies being different - * ??? if act_state != XPC_P_AS_INACTIVE instead of - * ??? below? - */ - msg = (struct xpc_activate_mq_msg_activate_req_uv *) - msg_hdr; - spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, - irq_flags); - if (part_uv->act_state_req == 0) - xpc_activate_IRQ_rcvd++; - part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV; - part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */ - part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies; - part_uv->remote_activate_mq_gpa = msg->activate_mq_gpa; - spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, - irq_flags); - wakeup_hb_checker++; - break; - } - case XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV: { - struct xpc_activate_mq_msg_deactivate_req_uv *msg; - - msg = (struct xpc_activate_mq_msg_deactivate_req_uv *) - msg_hdr; - spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, - irq_flags); - if (part_uv->act_state_req == 0) - xpc_activate_IRQ_rcvd++; - part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV; - part_uv->reason = msg->reason; - spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, - irq_flags); - wakeup_hb_checker++; - break; - } - case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV: { - struct xpc_activate_mq_msg_chctl_closerequest_uv *msg; + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV; + part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */ + part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies; + part_uv->remote_activate_mq_gpa = msg->activate_mq_gpa; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); - msg = (struct xpc_activate_mq_msg_chctl_closerequest_uv - *)msg_hdr; - args = &part->remote_openclose_args[msg->ch_number]; - args->reason = msg->reason; + (*wakeup_hb_checker)++; + break; + } + case XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV: { + struct xpc_activate_mq_msg_deactivate_req_uv *msg; - spin_lock_irqsave(&part->chctl_lock, irq_flags); - part->chctl.flags[msg->ch_number] |= - XPC_CHCTL_CLOSEREQUEST; - spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + msg = container_of(msg_hdr, struct + xpc_activate_mq_msg_deactivate_req_uv, hdr); - xpc_wakeup_channel_mgr(part); - break; - } - case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV: { - struct xpc_activate_mq_msg_chctl_closereply_uv *msg; + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV; + part_uv->reason = msg->reason; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + + (*wakeup_hb_checker)++; + return; + } + case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV: { + struct xpc_activate_mq_msg_chctl_closerequest_uv *msg; - msg = (struct xpc_activate_mq_msg_chctl_closereply_uv *) - msg_hdr; + msg = container_of(msg_hdr, struct + xpc_activate_mq_msg_chctl_closerequest_uv, + hdr); + args = &part->remote_openclose_args[msg->ch_number]; + args->reason = msg->reason; - spin_lock_irqsave(&part->chctl_lock, irq_flags); - part->chctl.flags[msg->ch_number] |= - XPC_CHCTL_CLOSEREPLY; - spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[msg->ch_number] |= XPC_CHCTL_CLOSEREQUEST; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); - xpc_wakeup_channel_mgr(part); - break; - } - case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV: { - struct xpc_activate_mq_msg_chctl_openrequest_uv *msg; + xpc_wakeup_channel_mgr(part); + break; + } + case XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV: { + struct xpc_activate_mq_msg_chctl_closereply_uv *msg; - msg = (struct xpc_activate_mq_msg_chctl_openrequest_uv - *)msg_hdr; - args = &part->remote_openclose_args[msg->ch_number]; - args->msg_size = msg->msg_size; - args->local_nentries = msg->local_nentries; + msg = container_of(msg_hdr, struct + xpc_activate_mq_msg_chctl_closereply_uv, + hdr); - spin_lock_irqsave(&part->chctl_lock, irq_flags); - part->chctl.flags[msg->ch_number] |= - XPC_CHCTL_OPENREQUEST; - spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[msg->ch_number] |= XPC_CHCTL_CLOSEREPLY; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); - xpc_wakeup_channel_mgr(part); - break; - } - case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV: { - struct xpc_activate_mq_msg_chctl_openreply_uv *msg; - - msg = (struct xpc_activate_mq_msg_chctl_openreply_uv *) - msg_hdr; - args = &part->remote_openclose_args[msg->ch_number]; - args->remote_nentries = msg->remote_nentries; - args->local_nentries = msg->local_nentries; - args->local_msgqueue_pa = msg->local_notify_mq_gpa; - - spin_lock_irqsave(&part->chctl_lock, irq_flags); - part->chctl.flags[msg->ch_number] |= - XPC_CHCTL_OPENREPLY; - spin_unlock_irqrestore(&part->chctl_lock, irq_flags); - - xpc_wakeup_channel_mgr(part); - break; - } - case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV: - spin_lock_irqsave(&part_uv->flags_lock, irq_flags); - part_uv->flags |= XPC_P_ENGAGED_UV; - spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); - break; + xpc_wakeup_channel_mgr(part); + break; + } + case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV: { + struct xpc_activate_mq_msg_chctl_openrequest_uv *msg; + + msg = container_of(msg_hdr, struct + xpc_activate_mq_msg_chctl_openrequest_uv, + hdr); + args = &part->remote_openclose_args[msg->ch_number]; + args->entry_size = msg->entry_size; + args->local_nentries = msg->local_nentries; + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENREQUEST; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + xpc_wakeup_channel_mgr(part); + break; + } + case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV: { + struct xpc_activate_mq_msg_chctl_openreply_uv *msg; + + msg = container_of(msg_hdr, struct + xpc_activate_mq_msg_chctl_openreply_uv, hdr); + args = &part->remote_openclose_args[msg->ch_number]; + args->remote_nentries = msg->remote_nentries; + args->local_nentries = msg->local_nentries; + args->local_msgqueue_pa = msg->local_notify_mq_gpa; + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENREPLY; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + xpc_wakeup_channel_mgr(part); + break; + } + case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV: + spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + part_uv->flags |= XPC_P_ENGAGED_UV; + spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); + break; + + case XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV: + spin_lock_irqsave(&part_uv->flags_lock, irq_flags); + part_uv->flags &= ~XPC_P_ENGAGED_UV; + spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); + break; + + default: + dev_err(xpc_part, "received unknown activate_mq msg type=%d " + "from partition=%d\n", msg_hdr->type, XPC_PARTID(part)); + + /* get hb checker to deactivate from the remote partition */ + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV; + part_uv->reason = xpBadMsgType; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); - case XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV: - spin_lock_irqsave(&part_uv->flags_lock, irq_flags); - part_uv->flags &= ~XPC_P_ENGAGED_UV; - spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags); - break; + (*wakeup_hb_checker)++; + return; + } - default: - dev_err(xpc_part, "received unknown activate_mq msg " - "type=%d from partition=%d\n", msg_hdr->type, - partid); - } + if (msg_hdr->rp_ts_jiffies != part->remote_rp_ts_jiffies && + part->remote_rp_ts_jiffies != 0) { + /* + * ??? Does what we do here need to be sensitive to + * ??? act_state or remote_act_state? + */ + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = XPC_P_ASR_REACTIVATE_UV; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); - if (msg_hdr->rp_ts_jiffies != part->remote_rp_ts_jiffies && - part->remote_rp_ts_jiffies != 0) { - /* - * ??? Does what we do here need to be sensitive to - * ??? act_state or remote_act_state? - */ - spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, - irq_flags); - if (part_uv->act_state_req == 0) - xpc_activate_IRQ_rcvd++; - part_uv->act_state_req = XPC_P_ASR_REACTIVATE_UV; - spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, - irq_flags); - wakeup_hb_checker++; + (*wakeup_hb_checker)++; + } +} + +static irqreturn_t +xpc_handle_activate_IRQ_uv(int irq, void *dev_id) +{ + struct xpc_activate_mq_msghdr_uv *msg_hdr; + short partid; + struct xpc_partition *part; + int wakeup_hb_checker = 0; + + while ((msg_hdr = gru_get_next_message(xpc_activate_mq_uv)) != NULL) { + + partid = msg_hdr->partid; + if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) { + dev_err(xpc_part, "xpc_handle_activate_IRQ_uv() " + "received invalid partid=0x%x in message\n", + partid); + } else { + part = &xpc_partitions[partid]; + if (xpc_part_ref(part)) { + xpc_handle_activate_mq_msg_uv(part, msg_hdr, + &wakeup_hb_checker); + xpc_part_deref(part); + } } gru_free_message(xpc_activate_mq_uv, msg_hdr); @@ -616,14 +643,82 @@ xpc_request_partition_deactivation_uv(struct xpc_partition *part) } } +static void +xpc_cancel_partition_deactivation_request_uv(struct xpc_partition *part) +{ + /* nothing needs to be done */ + return; +} + +static void +xpc_init_fifo_uv(struct xpc_fifo_head_uv *head) +{ + head->first = NULL; + head->last = NULL; + spin_lock_init(&head->lock); + head->n_entries = 0; +} + +static void * +xpc_get_fifo_entry_uv(struct xpc_fifo_head_uv *head) +{ + unsigned long irq_flags; + struct xpc_fifo_entry_uv *first; + + spin_lock_irqsave(&head->lock, irq_flags); + first = head->first; + if (head->first != NULL) { + head->first = first->next; + if (head->first == NULL) + head->last = NULL; + } + head->n_entries++; + spin_unlock_irqrestore(&head->lock, irq_flags); + first->next = NULL; + return first; +} + +static void +xpc_put_fifo_entry_uv(struct xpc_fifo_head_uv *head, + struct xpc_fifo_entry_uv *last) +{ + unsigned long irq_flags; + + last->next = NULL; + spin_lock_irqsave(&head->lock, irq_flags); + if (head->last != NULL) + head->last->next = last; + else + head->first = last; + head->last = last; + head->n_entries--; + BUG_ON(head->n_entries < 0); + spin_unlock_irqrestore(&head->lock, irq_flags); +} + +static int +xpc_n_of_fifo_entries_uv(struct xpc_fifo_head_uv *head) +{ + return head->n_entries; +} + /* * Setup the channel structures that are uv specific. */ static enum xp_retval xpc_setup_ch_structures_sn_uv(struct xpc_partition *part) { - /* !!! this function needs fleshing out */ - return xpUnsupported; + struct xpc_channel_uv *ch_uv; + int ch_number; + + for (ch_number = 0; ch_number < part->nchannels; ch_number++) { + ch_uv = &part->channels[ch_number].sn.uv; + + xpc_init_fifo_uv(&ch_uv->msg_slot_free_list); + xpc_init_fifo_uv(&ch_uv->recv_msg_list); + } + + return xpSuccess; } /* @@ -632,7 +727,7 @@ xpc_setup_ch_structures_sn_uv(struct xpc_partition *part) static void xpc_teardown_ch_structures_sn_uv(struct xpc_partition *part) { - /* !!! this function needs fleshing out */ + /* nothing needs to be done */ return; } @@ -679,21 +774,115 @@ xpc_get_chctl_all_flags_uv(struct xpc_partition *part) return chctl.all_flags; } +static enum xp_retval +xpc_allocate_send_msg_slot_uv(struct xpc_channel *ch) +{ + struct xpc_channel_uv *ch_uv = &ch->sn.uv; + struct xpc_send_msg_slot_uv *msg_slot; + unsigned long irq_flags; + int nentries; + int entry; + size_t nbytes; + + for (nentries = ch->local_nentries; nentries > 0; nentries--) { + nbytes = nentries * sizeof(struct xpc_send_msg_slot_uv); + ch_uv->send_msg_slots = kzalloc(nbytes, GFP_KERNEL); + if (ch_uv->send_msg_slots == NULL) + continue; + + for (entry = 0; entry < nentries; entry++) { + msg_slot = &ch_uv->send_msg_slots[entry]; + + msg_slot->msg_slot_number = entry; + xpc_put_fifo_entry_uv(&ch_uv->msg_slot_free_list, + &msg_slot->next); + } + + spin_lock_irqsave(&ch->lock, irq_flags); + if (nentries < ch->local_nentries) + ch->local_nentries = nentries; + spin_unlock_irqrestore(&ch->lock, irq_flags); + return xpSuccess; + } + + return xpNoMemory; +} + +static enum xp_retval +xpc_allocate_recv_msg_slot_uv(struct xpc_channel *ch) +{ + struct xpc_channel_uv *ch_uv = &ch->sn.uv; + struct xpc_notify_mq_msg_uv *msg_slot; + unsigned long irq_flags; + int nentries; + int entry; + size_t nbytes; + + for (nentries = ch->remote_nentries; nentries > 0; nentries--) { + nbytes = nentries * ch->entry_size; + ch_uv->recv_msg_slots = kzalloc(nbytes, GFP_KERNEL); + if (ch_uv->recv_msg_slots == NULL) + continue; + + for (entry = 0; entry < nentries; entry++) { + msg_slot = ch_uv->recv_msg_slots + entry * + ch->entry_size; + + msg_slot->hdr.msg_slot_number = entry; + } + + spin_lock_irqsave(&ch->lock, irq_flags); + if (nentries < ch->remote_nentries) + ch->remote_nentries = nentries; + spin_unlock_irqrestore(&ch->lock, irq_flags); + return xpSuccess; + } + + return xpNoMemory; +} + +/* + * Allocate msg_slots associated with the channel. + */ static enum xp_retval xpc_setup_msg_structures_uv(struct xpc_channel *ch) { - /* !!! this function needs fleshing out */ - return xpUnsupported; + static enum xp_retval ret; + struct xpc_channel_uv *ch_uv = &ch->sn.uv; + + DBUG_ON(ch->flags & XPC_C_SETUP); + + ret = xpc_allocate_send_msg_slot_uv(ch); + if (ret == xpSuccess) { + + ret = xpc_allocate_recv_msg_slot_uv(ch); + if (ret != xpSuccess) { + kfree(ch_uv->send_msg_slots); + xpc_init_fifo_uv(&ch_uv->msg_slot_free_list); + } + } + return ret; } +/* + * Free up msg_slots and clear other stuff that were setup for the specified + * channel. + */ static void xpc_teardown_msg_structures_uv(struct xpc_channel *ch) { struct xpc_channel_uv *ch_uv = &ch->sn.uv; + DBUG_ON(!spin_is_locked(&ch->lock)); + ch_uv->remote_notify_mq_gpa = 0; - /* !!! this function needs fleshing out */ + if (ch->flags & XPC_C_SETUP) { + xpc_init_fifo_uv(&ch_uv->msg_slot_free_list); + kfree(ch_uv->send_msg_slots); + xpc_init_fifo_uv(&ch_uv->recv_msg_list); + kfree(ch_uv->recv_msg_slots); + } } static void @@ -723,7 +912,7 @@ xpc_send_chctl_openrequest_uv(struct xpc_channel *ch, unsigned long *irq_flags) struct xpc_activate_mq_msg_chctl_openrequest_uv msg; msg.ch_number = ch->number; - msg.msg_size = ch->msg_size; + msg.entry_size = ch->entry_size; msg.local_nentries = ch->local_nentries; xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg), XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV); @@ -742,6 +931,18 @@ xpc_send_chctl_openreply_uv(struct xpc_channel *ch, unsigned long *irq_flags) XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV); } +static void +xpc_send_chctl_local_msgrequest_uv(struct xpc_partition *part, int ch_number) +{ + unsigned long irq_flags; + + spin_lock_irqsave(&part->chctl_lock, irq_flags); + part->chctl.flags[ch_number] |= XPC_CHCTL_MSGREQUEST; + spin_unlock_irqrestore(&part->chctl_lock, irq_flags); + + xpc_wakeup_channel_mgr(part); +} + static void xpc_save_remote_msgqueue_pa_uv(struct xpc_channel *ch, unsigned long msgqueue_pa) @@ -798,11 +999,358 @@ xpc_any_partition_engaged_uv(void) return 0; } -static struct xpc_msg * -xpc_get_deliverable_msg_uv(struct xpc_channel *ch) +static enum xp_retval +xpc_allocate_msg_slot_uv(struct xpc_channel *ch, u32 flags, + struct xpc_send_msg_slot_uv **address_of_msg_slot) +{ + enum xp_retval ret; + struct xpc_send_msg_slot_uv *msg_slot; + struct xpc_fifo_entry_uv *entry; + + while (1) { + entry = xpc_get_fifo_entry_uv(&ch->sn.uv.msg_slot_free_list); + if (entry != NULL) + break; + + if (flags & XPC_NOWAIT) + return xpNoWait; + + ret = xpc_allocate_msg_wait(ch); + if (ret != xpInterrupted && ret != xpTimeout) + return ret; + } + + msg_slot = container_of(entry, struct xpc_send_msg_slot_uv, next); + *address_of_msg_slot = msg_slot; + return xpSuccess; +} + +static void +xpc_free_msg_slot_uv(struct xpc_channel *ch, + struct xpc_send_msg_slot_uv *msg_slot) +{ + xpc_put_fifo_entry_uv(&ch->sn.uv.msg_slot_free_list, &msg_slot->next); + + /* wakeup anyone waiting for a free msg slot */ + if (atomic_read(&ch->n_on_msg_allocate_wq) > 0) + wake_up(&ch->msg_allocate_wq); +} + +static void +xpc_notify_sender_uv(struct xpc_channel *ch, + struct xpc_send_msg_slot_uv *msg_slot, + enum xp_retval reason) +{ + xpc_notify_func func = msg_slot->func; + + if (func != NULL && cmpxchg(&msg_slot->func, func, NULL) == func) { + + atomic_dec(&ch->n_to_notify); + + dev_dbg(xpc_chan, "msg_slot->func() called, msg_slot=0x%p " + "msg_slot_number=%d partid=%d channel=%d\n", msg_slot, + msg_slot->msg_slot_number, ch->partid, ch->number); + + func(reason, ch->partid, ch->number, msg_slot->key); + + dev_dbg(xpc_chan, "msg_slot->func() returned, msg_slot=0x%p " + "msg_slot_number=%d partid=%d channel=%d\n", msg_slot, + msg_slot->msg_slot_number, ch->partid, ch->number); + } +} + +static void +xpc_handle_notify_mq_ack_uv(struct xpc_channel *ch, + struct xpc_notify_mq_msg_uv *msg) +{ + struct xpc_send_msg_slot_uv *msg_slot; + int entry = msg->hdr.msg_slot_number % ch->local_nentries; + + msg_slot = &ch->sn.uv.send_msg_slots[entry]; + + BUG_ON(msg_slot->msg_slot_number != msg->hdr.msg_slot_number); + msg_slot->msg_slot_number += ch->local_nentries; + + if (msg_slot->func != NULL) + xpc_notify_sender_uv(ch, msg_slot, xpMsgDelivered); + + xpc_free_msg_slot_uv(ch, msg_slot); +} + +static void +xpc_handle_notify_mq_msg_uv(struct xpc_partition *part, + struct xpc_notify_mq_msg_uv *msg) +{ + struct xpc_partition_uv *part_uv = &part->sn.uv; + struct xpc_channel *ch; + struct xpc_channel_uv *ch_uv; + struct xpc_notify_mq_msg_uv *msg_slot; + unsigned long irq_flags; + int ch_number = msg->hdr.ch_number; + + if (unlikely(ch_number >= part->nchannels)) { + dev_err(xpc_part, "xpc_handle_notify_IRQ_uv() received invalid " + "channel number=0x%x in message from partid=%d\n", + ch_number, XPC_PARTID(part)); + + /* get hb checker to deactivate from the remote partition */ + spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); + if (part_uv->act_state_req == 0) + xpc_activate_IRQ_rcvd++; + part_uv->act_state_req = XPC_P_ASR_DEACTIVATE_UV; + part_uv->reason = xpBadChannelNumber; + spin_unlock_irqrestore(&xpc_activate_IRQ_rcvd_lock, irq_flags); + + wake_up_interruptible(&xpc_activate_IRQ_wq); + return; + } + + ch = &part->channels[ch_number]; + xpc_msgqueue_ref(ch); + + if (!(ch->flags & XPC_C_CONNECTED)) { + xpc_msgqueue_deref(ch); + return; + } + + /* see if we're really dealing with an ACK for a previously sent msg */ + if (msg->hdr.size == 0) { + xpc_handle_notify_mq_ack_uv(ch, msg); + xpc_msgqueue_deref(ch); + return; + } + + /* we're dealing with a normal message sent via the notify_mq */ + ch_uv = &ch->sn.uv; + + msg_slot = (struct xpc_notify_mq_msg_uv *)((u64)ch_uv->recv_msg_slots + + (msg->hdr.msg_slot_number % ch->remote_nentries) * + ch->entry_size); + + BUG_ON(msg->hdr.msg_slot_number != msg_slot->hdr.msg_slot_number); + BUG_ON(msg_slot->hdr.size != 0); + + memcpy(msg_slot, msg, msg->hdr.size); + + xpc_put_fifo_entry_uv(&ch_uv->recv_msg_list, &msg_slot->hdr.u.next); + + if (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) { + /* + * If there is an existing idle kthread get it to deliver + * the payload, otherwise we'll have to get the channel mgr + * for this partition to create a kthread to do the delivery. + */ + if (atomic_read(&ch->kthreads_idle) > 0) + wake_up_nr(&ch->idle_wq, 1); + else + xpc_send_chctl_local_msgrequest_uv(part, ch->number); + } + xpc_msgqueue_deref(ch); +} + +static irqreturn_t +xpc_handle_notify_IRQ_uv(int irq, void *dev_id) +{ + struct xpc_notify_mq_msg_uv *msg; + short partid; + struct xpc_partition *part; + + while ((msg = gru_get_next_message(xpc_notify_mq_uv)) != NULL) { + + partid = msg->hdr.partid; + if (partid < 0 || partid >= XP_MAX_NPARTITIONS_UV) { + dev_err(xpc_part, "xpc_handle_notify_IRQ_uv() received " + "invalid partid=0x%x in message\n", partid); + } else { + part = &xpc_partitions[partid]; + + if (xpc_part_ref(part)) { + xpc_handle_notify_mq_msg_uv(part, msg); + xpc_part_deref(part); + } + } + + gru_free_message(xpc_notify_mq_uv, msg); + } + + return IRQ_HANDLED; +} + +static int +xpc_n_of_deliverable_payloads_uv(struct xpc_channel *ch) +{ + return xpc_n_of_fifo_entries_uv(&ch->sn.uv.recv_msg_list); +} + +static void +xpc_process_msg_chctl_flags_uv(struct xpc_partition *part, int ch_number) +{ + struct xpc_channel *ch = &part->channels[ch_number]; + int ndeliverable_payloads; + + xpc_msgqueue_ref(ch); + + ndeliverable_payloads = xpc_n_of_deliverable_payloads_uv(ch); + + if (ndeliverable_payloads > 0 && + (ch->flags & XPC_C_CONNECTED) && + (ch->flags & XPC_C_CONNECTEDCALLOUT_MADE)) { + + xpc_activate_kthreads(ch, ndeliverable_payloads); + } + + xpc_msgqueue_deref(ch); +} + +static enum xp_retval +xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload, + u16 payload_size, u8 notify_type, xpc_notify_func func, + void *key) +{ + enum xp_retval ret = xpSuccess; + struct xpc_send_msg_slot_uv *msg_slot = NULL; + struct xpc_notify_mq_msg_uv *msg; + u8 msg_buffer[XPC_NOTIFY_MSG_SIZE_UV]; + size_t msg_size; + + DBUG_ON(notify_type != XPC_N_CALL); + + msg_size = sizeof(struct xpc_notify_mq_msghdr_uv) + payload_size; + if (msg_size > ch->entry_size) + return xpPayloadTooBig; + + xpc_msgqueue_ref(ch); + + if (ch->flags & XPC_C_DISCONNECTING) { + ret = ch->reason; + goto out_1; + } + if (!(ch->flags & XPC_C_CONNECTED)) { + ret = xpNotConnected; + goto out_1; + } + + ret = xpc_allocate_msg_slot_uv(ch, flags, &msg_slot); + if (ret != xpSuccess) + goto out_1; + + if (func != NULL) { + atomic_inc(&ch->n_to_notify); + + msg_slot->key = key; + wmb(); /* a non-NULL func must hit memory after the key */ + msg_slot->func = func; + + if (ch->flags & XPC_C_DISCONNECTING) { + ret = ch->reason; + goto out_2; + } + } + + msg = (struct xpc_notify_mq_msg_uv *)&msg_buffer; + msg->hdr.partid = xp_partition_id; + msg->hdr.ch_number = ch->number; + msg->hdr.size = msg_size; + msg->hdr.msg_slot_number = msg_slot->msg_slot_number; + memcpy(&msg->payload, payload, payload_size); + + ret = xpc_send_gru_msg(ch->sn.uv.remote_notify_mq_gpa, msg, msg_size); + if (ret == xpSuccess) + goto out_1; + + XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret); +out_2: + if (func != NULL) { + /* + * Try to NULL the msg_slot's func field. If we fail, then + * xpc_notify_senders_of_disconnect_uv() beat us to it, in which + * case we need to pretend we succeeded to send the message + * since the user will get a callout for the disconnect error + * by xpc_notify_senders_of_disconnect_uv(), and to also get an + * error returned here will confuse them. Additionally, since + * in this case the channel is being disconnected we don't need + * to put the the msg_slot back on the free list. + */ + if (cmpxchg(&msg_slot->func, func, NULL) != func) { + ret = xpSuccess; + goto out_1; + } + + msg_slot->key = NULL; + atomic_dec(&ch->n_to_notify); + } + xpc_free_msg_slot_uv(ch, msg_slot); +out_1: + xpc_msgqueue_deref(ch); + return ret; +} + +/* + * Tell the callers of xpc_send_notify() that the status of their payloads + * is unknown because the channel is now disconnecting. + * + * We don't worry about putting these msg_slots on the free list since the + * msg_slots themselves are about to be kfree'd. + */ +static void +xpc_notify_senders_of_disconnect_uv(struct xpc_channel *ch) +{ + struct xpc_send_msg_slot_uv *msg_slot; + int entry; + + DBUG_ON(!(ch->flags & XPC_C_DISCONNECTING)); + + for (entry = 0; entry < ch->local_nentries; entry++) { + + if (atomic_read(&ch->n_to_notify) == 0) + break; + + msg_slot = &ch->sn.uv.send_msg_slots[entry]; + if (msg_slot->func != NULL) + xpc_notify_sender_uv(ch, msg_slot, ch->reason); + } +} + +/* + * Get the next deliverable message's payload. + */ +static void * +xpc_get_deliverable_payload_uv(struct xpc_channel *ch) +{ + struct xpc_fifo_entry_uv *entry; + struct xpc_notify_mq_msg_uv *msg; + void *payload = NULL; + + if (!(ch->flags & XPC_C_DISCONNECTING)) { + entry = xpc_get_fifo_entry_uv(&ch->sn.uv.recv_msg_list); + if (entry != NULL) { + msg = container_of(entry, struct xpc_notify_mq_msg_uv, + hdr.u.next); + payload = &msg->payload; + } + } + return payload; +} + +static void +xpc_received_payload_uv(struct xpc_channel *ch, void *payload) { - /* !!! this function needs fleshing out */ - return NULL; + struct xpc_notify_mq_msg_uv *msg; + enum xp_retval ret; + + msg = container_of(payload, struct xpc_notify_mq_msg_uv, payload); + + /* return an ACK to the sender of this message */ + + msg->hdr.partid = xp_partition_id; + msg->hdr.size = 0; /* size of zero indicates this is an ACK */ + + ret = xpc_send_gru_msg(ch->sn.uv.remote_notify_mq_gpa, msg, + sizeof(struct xpc_notify_mq_msghdr_uv)); + if (ret != xpSuccess) + XPC_DEACTIVATE_PARTITION(&xpc_partitions[ch->partid], ret); + + msg->hdr.msg_slot_number += ch->remote_nentries; } int @@ -824,6 +1372,8 @@ xpc_init_uv(void) xpc_request_partition_reactivation_uv; xpc_request_partition_deactivation = xpc_request_partition_deactivation_uv; + xpc_cancel_partition_deactivation_request = + xpc_cancel_partition_deactivation_request_uv; xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_uv; xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_uv; @@ -848,7 +1398,18 @@ xpc_init_uv(void) xpc_partition_engaged = xpc_partition_engaged_uv; xpc_any_partition_engaged = xpc_any_partition_engaged_uv; - xpc_get_deliverable_msg = xpc_get_deliverable_msg_uv; + xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv; + xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv; + xpc_send_payload = xpc_send_payload_uv; + xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv; + xpc_get_deliverable_payload = xpc_get_deliverable_payload_uv; + xpc_received_payload = xpc_received_payload_uv; + + if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) { + dev_err(xpc_part, "xpc_notify_mq_msghdr_uv is larger than %d\n", + XPC_MSG_HDR_MAX_SIZE); + return -E2BIG; + } /* ??? The cpuid argument's value is 0, is that what we want? */ /* !!! The irq argument's value isn't correct. */ @@ -857,12 +1418,26 @@ xpc_init_uv(void) if (xpc_activate_mq_uv == NULL) return -ENOMEM; + /* ??? The cpuid argument's value is 0, is that what we want? */ + /* !!! The irq argument's value isn't correct. */ + xpc_notify_mq_uv = xpc_create_gru_mq_uv(XPC_NOTIFY_MQ_SIZE_UV, 0, 0, + xpc_handle_notify_IRQ_uv); + if (xpc_notify_mq_uv == NULL) { + /* !!! The irq argument's value isn't correct. */ + xpc_destroy_gru_mq_uv(xpc_activate_mq_uv, + XPC_ACTIVATE_MQ_SIZE_UV, 0); + return -ENOMEM; + } + return 0; } void xpc_exit_uv(void) { + /* !!! The irq argument's value isn't correct. */ + xpc_destroy_gru_mq_uv(xpc_notify_mq_uv, XPC_NOTIFY_MQ_SIZE_UV, 0); + /* !!! The irq argument's value isn't correct. */ xpc_destroy_gru_mq_uv(xpc_activate_mq_uv, XPC_ACTIVATE_MQ_SIZE_UV, 0); } diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c index 4f5d6223011..71513b3af70 100644 --- a/drivers/misc/sgi-xp/xpnet.c +++ b/drivers/misc/sgi-xp/xpnet.c @@ -57,11 +57,10 @@ struct xpnet_message { * * XPC expects each message to exist in an individual cacheline. */ -#define XPNET_MSG_SIZE (L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET) +#define XPNET_MSG_SIZE XPC_MSG_PAYLOAD_MAX_SIZE #define XPNET_MSG_DATA_MAX \ - (XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data)) -#define XPNET_MSG_ALIGNED_SIZE (L1_CACHE_ALIGN(XPNET_MSG_SIZE)) -#define XPNET_MSG_NENTRIES (PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE) + (XPNET_MSG_SIZE - offsetof(struct xpnet_message, data)) +#define XPNET_MSG_NENTRIES (PAGE_SIZE / XPC_MSG_MAX_SIZE) #define XPNET_MAX_KTHREADS (XPNET_MSG_NENTRIES + 1) #define XPNET_MAX_IDLE_KTHREADS (XPNET_MSG_NENTRIES + 1) @@ -408,6 +407,7 @@ xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg, { u8 msg_buffer[XPNET_MSG_SIZE]; struct xpnet_message *msg = (struct xpnet_message *)&msg_buffer; + u16 msg_size = sizeof(struct xpnet_message); enum xp_retval ret; msg->embedded_bytes = embedded_bytes; @@ -417,6 +417,7 @@ xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg, &msg->data, skb->data, (size_t)embedded_bytes); skb_copy_from_linear_data(skb, &msg->data, (size_t)embedded_bytes); + msg_size += embedded_bytes - 1; } else { msg->version = XPNET_VERSION; } @@ -435,7 +436,7 @@ xpnet_send(struct sk_buff *skb, struct xpnet_pending_msg *queued_msg, atomic_inc(&queued_msg->use_count); ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, XPC_NOWAIT, msg, - XPNET_MSG_SIZE, xpnet_send_completed, queued_msg); + msg_size, xpnet_send_completed, queued_msg); if (unlikely(ret != xpSuccess)) atomic_dec(&queued_msg->use_count); } -- GitLab From afd962a9e8708c571c5c0c4a6d098f931742c229 Mon Sep 17 00:00:00 2001 From: Vitaly Mayatskikh Date: Wed, 30 Jul 2008 13:30:14 +0200 Subject: [PATCH 0416/1024] x86: wrong register was used in align macro New ALIGN_DESTINATION macro has sad typo: r8d register was used instead of ecx in fixup section. This can be considered as a regression. Register ecx was also wrongly loaded with value in r8d in copy_user_nocache routine. Signed-off-by: Vitaly Mayatskikh Signed-off-by: Linus Torvalds --- arch/x86/lib/copy_user_64.S | 2 +- arch/x86/lib/copy_user_nocache_64.S | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S index dfdf428975c..f118c110af3 100644 --- a/arch/x86/lib/copy_user_64.S +++ b/arch/x86/lib/copy_user_64.S @@ -52,7 +52,7 @@ jnz 100b 102: .section .fixup,"ax" -103: addl %r8d,%edx /* ecx is zerorest also */ +103: addl %ecx,%edx /* ecx is zerorest also */ jmp copy_user_handle_tail .previous diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S index 40e0e309d27..cb0c112386f 100644 --- a/arch/x86/lib/copy_user_nocache_64.S +++ b/arch/x86/lib/copy_user_nocache_64.S @@ -32,7 +32,7 @@ jnz 100b 102: .section .fixup,"ax" -103: addl %r8d,%edx /* ecx is zerorest also */ +103: addl %ecx,%edx /* ecx is zerorest also */ jmp copy_user_handle_tail .previous @@ -108,7 +108,6 @@ ENTRY(__copy_user_nocache) jmp 60f 50: movl %ecx,%edx 60: sfence - movl %r8d,%ecx jmp copy_user_handle_tail .previous -- GitLab From 3dd730f2b49f101b90d283c3efc4e6cd826dd8f6 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 29 Jul 2008 16:07:37 +1000 Subject: [PATCH 0417/1024] cpumask: statement expressions confuse some versions of gcc when you take the address of the result. Noticed on a sparc64 compile using a version 3.4.5 cross compiler. kernel/time/tick-common.c: In function `tick_check_new_device': kernel/time/tick-common.c:210: error: invalid lvalue in unary `&' ... Just make it a regular expression. Signed-off-by: Stephen Rothwell Acked-by: Ingo Molnar Signed-off-by: Linus Torvalds --- include/linux/cpumask.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 96d0509fb8d..d3219d73f8e 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -287,7 +287,7 @@ static inline const cpumask_t *get_cpu_mask(unsigned int cpu) * gcc optimizes it out (it's a constant) and there's no huge stack * variable created: */ -#define cpumask_of_cpu(cpu) ({ *get_cpu_mask(cpu); }) +#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu)) #define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS) -- GitLab From ea35455e0dc17d732436a5b98bd511cab64eb10e Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Wed, 30 Jul 2008 22:21:20 +0200 Subject: [PATCH 0418/1024] kbuild: fix O=... build of um We used include/asm-$ARCH/system.h to check if we should create a symlink in include2 directory with make O=... builds. But um does not have such a file thus build filed. Let's try anohter filename: $ ls -d include/asm-* | wc -l 21 $ ls -d include/asm-*/errno.h | wc -l 21 Signed-off-by: Sam Ravnborg Cc: Jeff Dike --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index aa527a46c80..f156f40d633 100644 --- a/Makefile +++ b/Makefile @@ -930,7 +930,7 @@ ifneq ($(KBUILD_SRC),) /bin/false; \ fi; $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi; - $(Q)if [ -e $(srctree)/include/asm-$(SRCARCH)/system.h ]; then \ + $(Q)if [ -e $(srctree)/include/asm-$(SRCARCH)/errno.h ]; then \ ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \ fi endif -- GitLab From b962a286e500c6259af8ba133361f8528eed9172 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 30 Jul 2008 21:24:56 +0100 Subject: [PATCH 0419/1024] [ARM] initrd: claim initrd memory exclusively Claim the initrd memory exclusively, and order other memory reservations beforehand. This allows us to determine whether the initrd memory was overwritten, and disable the initrd in that case. This avoids a 'bad page state' bug. Tested-by: Ralph Siemsen Signed-off-by: Russell King --- arch/arm/mm/init.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index e6352946dde..30a69d67d67 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -156,9 +156,9 @@ static int __init check_initrd(struct meminfo *mi) } if (initrd_node == -1) { - printk(KERN_ERR "initrd (0x%08lx - 0x%08lx) extends beyond " + printk(KERN_ERR "INITRD: 0x%08lx+0x%08lx extends beyond " "physical memory - disabling initrd\n", - phys_initrd_start, end); + phys_initrd_start, phys_initrd_size); phys_initrd_start = phys_initrd_size = 0; } #endif @@ -239,24 +239,32 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi) reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT, boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT); + /* + * Reserve any special node zero regions. + */ + if (node == 0) + reserve_node_zero(pgdat); + #ifdef CONFIG_BLK_DEV_INITRD /* * If the initrd is in this node, reserve its memory. */ if (node == initrd_node) { - reserve_bootmem_node(pgdat, phys_initrd_start, - phys_initrd_size, BOOTMEM_DEFAULT); - initrd_start = __phys_to_virt(phys_initrd_start); - initrd_end = initrd_start + phys_initrd_size; + int res = reserve_bootmem_node(pgdat, phys_initrd_start, + phys_initrd_size, BOOTMEM_EXCLUSIVE); + + if (res == 0) { + initrd_start = __phys_to_virt(phys_initrd_start); + initrd_end = initrd_start + phys_initrd_size; + } else { + printk(KERN_ERR + "INITRD: 0x%08lx+0x%08lx overlaps in-use " + "memory region - disabling initrd\n", + phys_initrd_start, phys_initrd_size); + } } #endif - /* - * Finally, reserve any node zero regions. - */ - if (node == 0) - reserve_node_zero(pgdat); - /* * initialise the zones within this node. */ -- GitLab From be2be1d59035a28debb22555f103e676a8f74186 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 17 Jul 2008 02:07:59 +0300 Subject: [PATCH 0420/1024] kconfig: scripts/kconfig/zconf.l: add %option noinput MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gcc 4.3 correctly determines that input() is unused and gives the following warning: <-- snip --> ... HOSTCC scripts/kconfig/zconf.tab.o scripts/kconfig/lex.zconf.c:1628: warning: ‘input’ defined but not used ... <-- snip --> Fix it by adding %option noinput to scripts/kconfig/zconf.l and regeneration of scripts/kconfig/lex.zconf.c_shipped. Signed-off-by: Adrian Bunk Cc: Roman Zippel Signed-off-by: Sam Ravnborg --- scripts/kconfig/lex.zconf.c_shipped | 86 ++++++++++++++++++++++++----- scripts/kconfig/zconf.l | 1 + 2 files changed, 73 insertions(+), 14 deletions(-) diff --git a/scripts/kconfig/lex.zconf.c_shipped b/scripts/kconfig/lex.zconf.c_shipped index 6a61cee4a32..7342ce0a778 100644 --- a/scripts/kconfig/lex.zconf.c_shipped +++ b/scripts/kconfig/lex.zconf.c_shipped @@ -5,10 +5,29 @@ /* A lexical scanner generated by flex */ +#define yy_create_buffer zconf_create_buffer +#define yy_delete_buffer zconf_delete_buffer +#define yy_flex_debug zconf_flex_debug +#define yy_init_buffer zconf_init_buffer +#define yy_flush_buffer zconf_flush_buffer +#define yy_load_buffer_state zconf_load_buffer_state +#define yy_switch_to_buffer zconf_switch_to_buffer +#define yyin zconfin +#define yyleng zconfleng +#define yylex zconflex +#define yylineno zconflineno +#define yyout zconfout +#define yyrestart zconfrestart +#define yytext zconftext +#define yywrap zconfwrap +#define yyalloc zconfalloc +#define yyrealloc zconfrealloc +#define yyfree zconffree + #define FLEX_SCANNER #define YY_FLEX_MAJOR_VERSION 2 #define YY_FLEX_MINOR_VERSION 5 -#define YY_FLEX_SUBMINOR_VERSION 33 +#define YY_FLEX_SUBMINOR_VERSION 35 #if YY_FLEX_SUBMINOR_VERSION > 0 #define FLEX_BETA #endif @@ -30,7 +49,7 @@ /* C99 systems have . Non-C99 systems may or may not. */ -#if __STDC_VERSION__ >= 199901L +#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, * if you want the limit (max/min) macros for int types. @@ -53,7 +72,6 @@ typedef int flex_int32_t; typedef unsigned char flex_uint8_t; typedef unsigned short int flex_uint16_t; typedef unsigned int flex_uint32_t; -#endif /* ! C99 */ /* Limits of integral types. */ #ifndef INT8_MIN @@ -84,6 +102,8 @@ typedef unsigned int flex_uint32_t; #define UINT32_MAX (4294967295U) #endif +#endif /* ! C99 */ + #endif /* ! FLEXINT_H */ #ifdef __cplusplus @@ -93,11 +113,12 @@ typedef unsigned int flex_uint32_t; #else /* ! __cplusplus */ -#if __STDC__ +/* C99 requires __STDC__ to be defined as 1. */ +#if defined (__STDC__) #define YY_USE_CONST -#endif /* __STDC__ */ +#endif /* defined (__STDC__) */ #endif /* ! __cplusplus */ #ifdef YY_USE_CONST @@ -177,14 +198,9 @@ extern FILE *zconfin, *zconfout; #define unput(c) yyunput( c, (yytext_ptr) ) -/* The following is because we cannot portably get our hands on size_t - * (without autoconf's help, which isn't available because we want - * flex-generated scanners to compile on their own). - */ - #ifndef YY_TYPEDEF_YY_SIZE_T #define YY_TYPEDEF_YY_SIZE_T -typedef unsigned int yy_size_t; +typedef size_t yy_size_t; #endif #ifndef YY_STRUCT_YY_BUFFER_STATE @@ -335,7 +351,7 @@ void zconffree (void * ); /* Begin user sect3 */ -#define zconfwrap() 1 +#define zconfwrap(n) 1 #define YY_SKIP_YYWRAP typedef unsigned char YY_CHAR; @@ -748,6 +764,7 @@ int zconf_flex_debug = 0; #define YY_MORE_ADJ 0 #define YY_RESTORE_YY_MORE_OFFSET char *zconftext; +#define YY_NO_INPUT 1 /* * Copyright (C) 2002 Roman Zippel @@ -834,6 +851,35 @@ void alloc_string(const char *str, int size) static int yy_init_globals (void ); +/* Accessor methods to globals. + These are made visible to non-reentrant scanners for convenience. */ + +int zconflex_destroy (void ); + +int zconfget_debug (void ); + +void zconfset_debug (int debug_flag ); + +YY_EXTRA_TYPE zconfget_extra (void ); + +void zconfset_extra (YY_EXTRA_TYPE user_defined ); + +FILE *zconfget_in (void ); + +void zconfset_in (FILE * in_str ); + +FILE *zconfget_out (void ); + +void zconfset_out (FILE * out_str ); + +int zconfget_leng (void ); + +char *zconfget_text (void ); + +int zconfget_lineno (void ); + +void zconfset_lineno (int line_number ); + /* Macros after this point can all be overridden by user definitions in * section 1. */ @@ -876,7 +922,7 @@ static int input (void ); /* This used to be an fputs(), but since the string might contain NUL's, * we now use fwrite(). */ -#define ECHO (void) fwrite( zconftext, zconfleng, 1, zconfout ) +#define ECHO fwrite( zconftext, zconfleng, 1, zconfout ) #endif /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, @@ -1540,6 +1586,14 @@ static int yy_get_next_buffer (void) else ret_val = EOB_ACT_CONTINUE_SCAN; + if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { + /* Extend the array by 50%, plus the number we really need. */ + yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) zconfrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); + if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); + } + (yy_n_chars) += number_to_move; YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; @@ -1926,7 +1980,9 @@ static void zconfensure_buffer_stack (void) (yy_buffer_stack) = (struct yy_buffer_state**)zconfalloc (num_to_alloc * sizeof(struct yy_buffer_state*) ); - + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" ); + memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); (yy_buffer_stack_max) = num_to_alloc; @@ -1944,6 +2000,8 @@ static void zconfensure_buffer_stack (void) ((yy_buffer_stack), num_to_alloc * sizeof(struct yy_buffer_state*) ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" ); /* zero only the new slots.*/ memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); diff --git a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l index 4cea5c85cd0..5164ef7ce49 100644 --- a/scripts/kconfig/zconf.l +++ b/scripts/kconfig/zconf.l @@ -1,5 +1,6 @@ %option backup nostdinit noyywrap never-interactive full ecs %option 8bit backup nodefault perf-report perf-report +%option noinput %x COMMAND HELP STRING PARAM %{ /* -- GitLab From 11ddad396086f8d1dfcb0056dc9d65d228f755c1 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 17 Jul 2008 02:08:12 +0300 Subject: [PATCH 0421/1024] kbuild: scripts/genksyms/lex.l: add %option noinput MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gcc 4.3 correctly determines that input() is unused and gives the following warning: <-- snip --> ... HOSTCC scripts/genksyms/lex.o scripts/genksyms/lex.c:1487: warning: ‘input’ defined but not used ... <-- snip --> Fix it by adding %option noinput to scripts/genksyms/lex.l and regeneration of scripts/genksyms/lex.c_shipped. Signed-off-by: Adrian Bunk Signed-off-by: Sam Ravnborg --- scripts/genksyms/lex.c_shipped | 133 +++++++++++++++++++++------------ scripts/genksyms/lex.l | 2 + 2 files changed, 88 insertions(+), 47 deletions(-) diff --git a/scripts/genksyms/lex.c_shipped b/scripts/genksyms/lex.c_shipped index 2a176988d46..2ac23bcca5b 100644 --- a/scripts/genksyms/lex.c_shipped +++ b/scripts/genksyms/lex.c_shipped @@ -6,10 +6,19 @@ /* A lexical scanner generated by flex */ +/* %not-for-header */ + +/* %if-c-only */ +/* %if-not-reentrant */ + +/* %endif */ +/* %endif */ +/* %ok-for-header */ + #define FLEX_SCANNER #define YY_FLEX_MAJOR_VERSION 2 #define YY_FLEX_MINOR_VERSION 5 -#define YY_FLEX_SUBMINOR_VERSION 33 +#define YY_FLEX_SUBMINOR_VERSION 35 #if YY_FLEX_SUBMINOR_VERSION > 0 #define FLEX_BETA #endif @@ -47,7 +56,7 @@ /* C99 systems have . Non-C99 systems may or may not. */ -#if __STDC_VERSION__ >= 199901L +#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L /* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, * if you want the limit (max/min) macros for int types. @@ -70,7 +79,6 @@ typedef int flex_int32_t; typedef unsigned char flex_uint8_t; typedef unsigned short int flex_uint16_t; typedef unsigned int flex_uint32_t; -#endif /* ! C99 */ /* Limits of integral types. */ #ifndef INT8_MIN @@ -101,6 +109,8 @@ typedef unsigned int flex_uint32_t; #define UINT32_MAX (4294967295U) #endif +#endif /* ! C99 */ + #endif /* ! FLEXINT_H */ /* %endif */ @@ -115,11 +125,12 @@ typedef unsigned int flex_uint32_t; #else /* ! __cplusplus */ -#if __STDC__ +/* C99 requires __STDC__ to be defined as 1. */ +#if defined (__STDC__) #define YY_USE_CONST -#endif /* __STDC__ */ +#endif /* defined (__STDC__) */ #endif /* ! __cplusplus */ #ifdef YY_USE_CONST @@ -218,14 +229,9 @@ extern FILE *yyin, *yyout; #define unput(c) yyunput( c, (yytext_ptr) ) -/* The following is because we cannot portably get our hands on size_t - * (without autoconf's help, which isn't available because we want - * flex-generated scanners to compile on their own). - */ - #ifndef YY_TYPEDEF_YY_SIZE_T #define YY_TYPEDEF_YY_SIZE_T -typedef unsigned int yy_size_t; +typedef size_t yy_size_t; #endif #ifndef YY_STRUCT_YY_BUFFER_STATE @@ -401,7 +407,7 @@ void yyfree (void * ); /* %% [1.0] yytext/yyin/yyout/yy_state_type/yylineno etc. def's & init go here */ /* Begin user sect3 */ -#define yywrap() 1 +#define yywrap(n) 1 #define YY_SKIP_YYWRAP #define FLEX_DEBUG @@ -613,8 +619,8 @@ int yy_flex_debug = 1; static yyconst flex_int16_t yy_rule_linenum[13] = { 0, - 69, 70, 71, 74, 77, 78, 79, 85, 86, 87, - 89, 92 + 71, 72, 73, 76, 79, 80, 81, 87, 88, 89, + 91, 94 } ; /* The intent behind this definition is that it'll catch @@ -665,7 +671,8 @@ char *yytext; quite so pedantic. */ /* We don't do multiple input files. */ -#line 669 "scripts/genksyms/lex.c" +#define YY_NO_INPUT 1 +#line 676 "scripts/genksyms/lex.c" #define INITIAL 0 #define V2_TOKENS 1 @@ -695,9 +702,39 @@ static int yy_init_globals (void ); /* %endif */ /* %if-reentrant */ /* %endif */ +/* %endif End reentrant structures and macros. */ + +/* Accessor methods to globals. + These are made visible to non-reentrant scanners for convenience. */ + +int yylex_destroy (void ); + +int yyget_debug (void ); + +void yyset_debug (int debug_flag ); + +YY_EXTRA_TYPE yyget_extra (void ); + +void yyset_extra (YY_EXTRA_TYPE user_defined ); + +FILE *yyget_in (void ); + +void yyset_in (FILE * in_str ); + +FILE *yyget_out (void ); + +void yyset_out (FILE * out_str ); + +int yyget_leng (void ); + +char *yyget_text (void ); + +int yyget_lineno (void ); + +void yyset_lineno (int line_number ); + /* %if-bison-bridge */ /* %endif */ -/* %endif End reentrant structures and macros. */ /* Macros after this point can all be overridden by user definitions in * section 1. @@ -756,7 +793,7 @@ static int input (void ); /* This used to be an fputs(), but since the string might contain NUL's, * we now use fwrite(). */ -#define ECHO (void) fwrite( yytext, yyleng, 1, yyout ) +#define ECHO fwrite( yytext, yyleng, 1, yyout ) /* %endif */ /* %if-c++-only C++ definition */ /* %endif */ @@ -881,12 +918,12 @@ YY_DECL register int yy_act; /* %% [7.0] user's declarations go here */ -#line 65 "scripts/genksyms/lex.l" +#line 67 "scripts/genksyms/lex.l" /* Keep track of our location in the original source files. */ -#line 890 "scripts/genksyms/lex.c" +#line 927 "scripts/genksyms/lex.c" if ( !(yy_init) ) { @@ -1004,42 +1041,42 @@ do_action: /* This label is used only to access EOF actions. */ case 1: /* rule 1 can match eol */ YY_RULE_SETUP -#line 69 "scripts/genksyms/lex.l" +#line 71 "scripts/genksyms/lex.l" return FILENAME; YY_BREAK case 2: /* rule 2 can match eol */ YY_RULE_SETUP -#line 70 "scripts/genksyms/lex.l" +#line 72 "scripts/genksyms/lex.l" cur_line++; YY_BREAK case 3: /* rule 3 can match eol */ YY_RULE_SETUP -#line 71 "scripts/genksyms/lex.l" +#line 73 "scripts/genksyms/lex.l" cur_line++; YY_BREAK /* Ignore all other whitespace. */ case 4: YY_RULE_SETUP -#line 74 "scripts/genksyms/lex.l" +#line 76 "scripts/genksyms/lex.l" ; YY_BREAK case 5: /* rule 5 can match eol */ YY_RULE_SETUP -#line 77 "scripts/genksyms/lex.l" +#line 79 "scripts/genksyms/lex.l" return STRING; YY_BREAK case 6: /* rule 6 can match eol */ YY_RULE_SETUP -#line 78 "scripts/genksyms/lex.l" +#line 80 "scripts/genksyms/lex.l" return CHAR; YY_BREAK case 7: YY_RULE_SETUP -#line 79 "scripts/genksyms/lex.l" +#line 81 "scripts/genksyms/lex.l" return IDENT; YY_BREAK /* The Pedant requires that the other C multi-character tokens be @@ -1048,36 +1085,36 @@ return IDENT; around them properly. */ case 8: YY_RULE_SETUP -#line 85 "scripts/genksyms/lex.l" +#line 87 "scripts/genksyms/lex.l" return OTHER; YY_BREAK case 9: YY_RULE_SETUP -#line 86 "scripts/genksyms/lex.l" +#line 88 "scripts/genksyms/lex.l" return INT; YY_BREAK case 10: YY_RULE_SETUP -#line 87 "scripts/genksyms/lex.l" +#line 89 "scripts/genksyms/lex.l" return REAL; YY_BREAK case 11: YY_RULE_SETUP -#line 89 "scripts/genksyms/lex.l" +#line 91 "scripts/genksyms/lex.l" return DOTS; YY_BREAK /* All other tokens are single characters. */ case 12: YY_RULE_SETUP -#line 92 "scripts/genksyms/lex.l" +#line 94 "scripts/genksyms/lex.l" return yytext[0]; YY_BREAK case 13: YY_RULE_SETUP -#line 95 "scripts/genksyms/lex.l" +#line 97 "scripts/genksyms/lex.l" ECHO; YY_BREAK -#line 1081 "scripts/genksyms/lex.c" +#line 1118 "scripts/genksyms/lex.c" case YY_STATE_EOF(INITIAL): case YY_STATE_EOF(V2_TOKENS): yyterminate(); @@ -1346,6 +1383,14 @@ static int yy_get_next_buffer (void) else ret_val = EOB_ACT_CONTINUE_SCAN; + if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { + /* Extend the array by 50%, plus the number we really need. */ + yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); + if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); + } + (yy_n_chars) += number_to_move; YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; @@ -1851,7 +1896,9 @@ static void yyensure_buffer_stack (void) (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc (num_to_alloc * sizeof(struct yy_buffer_state*) ); - + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); (yy_buffer_stack_max) = num_to_alloc; @@ -1869,6 +1916,8 @@ static void yyensure_buffer_stack (void) ((yy_buffer_stack), num_to_alloc * sizeof(struct yy_buffer_state*) ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); /* zero only the new slots.*/ memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); @@ -2092,7 +2141,7 @@ void yyset_debug (int bdebug ) /* %if-reentrant */ /* %if-bison-bridge */ /* %endif */ -/* %endif */ +/* %endif if-c-only */ /* %if-c-only */ static int yy_init_globals (void) @@ -2124,13 +2173,9 @@ static int yy_init_globals (void) } /* %endif */ -/* %if-c-or-c++ */ -/* %if-c-only */ +/* %if-c-only SNIP! this currently causes conflicts with the c++ scanner */ /* yylex_destroy is for both reentrant and non-reentrant scanners. */ int yylex_destroy (void) -/* %endif */ -/* %if-c++-only */ -/* %endif */ { /* Pop the buffer stack, destroying each element. */ @@ -2144,11 +2189,6 @@ int yylex_destroy (void) yyfree((yy_buffer_stack) ); (yy_buffer_stack) = NULL; -/* %if-c++-only */ -/* %endif */ - -/* %if-c-only */ - /* Reset the globals. This is important in a non-reentrant scanner so the next time * yylex() is called, initialization will occur. */ yy_init_globals( ); @@ -2156,7 +2196,6 @@ int yylex_destroy (void) /* %if-reentrant */ /* %endif */ return 0; -/* %endif */ } /* %endif */ @@ -2213,7 +2252,7 @@ void yyfree (void * ptr ) /* %ok-for-header */ -#line 95 "scripts/genksyms/lex.l" +#line 97 "scripts/genksyms/lex.l" diff --git a/scripts/genksyms/lex.l b/scripts/genksyms/lex.l index 5e544a06678..fe50ff9dacd 100644 --- a/scripts/genksyms/lex.l +++ b/scripts/genksyms/lex.l @@ -62,6 +62,8 @@ MC_TOKEN ([~%^&*+=|<>/-]=)|(&&)|("||")|(->)|(<<)|(>>) /* We don't do multiple input files. */ %option noyywrap +%option noinput + %% -- GitLab From af6dc22b03a95c31b690f299b2fd7acb279fe7f5 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 22 Jul 2008 18:04:38 +0100 Subject: [PATCH 0422/1024] [MIPS] tlb-r4k: Nuke broken paranoia error test. Bug originally found and reported by Julia Lawall . I decieded that the whole error check was mostly useless paranoia and should be discarded. It would only ever trigger if r3k_have_wired_reg has a wrong value. Signed-off-by: Ralf Baechle --- arch/mips/mm/tlb-r3k.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c index a782549ac80..f0cf46adb97 100644 --- a/arch/mips/mm/tlb-r3k.c +++ b/arch/mips/mm/tlb-r3k.c @@ -246,10 +246,6 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, old_pagemask = read_c0_pagemask(); w = read_c0_wired(); write_c0_wired(w + 1); - if (read_c0_wired() != w + 1) { - printk("[tlbwired] No WIRED reg?\n"); - return; - } write_c0_index(w << 8); write_c0_pagemask(pagemask); write_c0_entryhi(entryhi); -- GitLab From fd7ccfa7ac64156a5c1c906e0986b73d481b6dfc Mon Sep 17 00:00:00 2001 From: Kevin Hickey Date: Mon, 28 Jul 2008 13:09:26 -0500 Subject: [PATCH 0423/1024] [MIPS] Initialization of Alchemy boards An earlier update changed some calls from simple_strotl to strict_strtol but did not account for the differences in the syntax between the calls. simple_strotl returns the integer; strict_strtol returns an error code and takes a pointer to the result. As it was, NULL was being passed in place of the result, which led to failures during kernel initialization when using YAMON. Signed-off-by: Kevin Hickey Signed-off-by: Ralf Baechle --- arch/mips/au1000/db1x00/init.c | 2 +- arch/mips/au1000/mtx-1/init.c | 2 +- arch/mips/au1000/pb1000/init.c | 2 +- arch/mips/au1000/pb1100/init.c | 2 +- arch/mips/au1000/pb1200/init.c | 2 +- arch/mips/au1000/pb1500/init.c | 2 +- arch/mips/au1000/pb1550/init.c | 2 +- arch/mips/au1000/xxs1500/init.c | 2 +- 8 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c index 5ebe0de5e45..84741351496 100644 --- a/arch/mips/au1000/db1x00/init.c +++ b/arch/mips/au1000/db1x00/init.c @@ -57,6 +57,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c index 33a4aebe0cb..3bae13c2895 100644 --- a/arch/mips/au1000/mtx-1/init.c +++ b/arch/mips/au1000/mtx-1/init.c @@ -55,6 +55,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c index 3837365d613..8a9c7d57208 100644 --- a/arch/mips/au1000/pb1000/init.c +++ b/arch/mips/au1000/pb1000/init.c @@ -52,6 +52,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c index 8355483f3de..7c6792308bc 100644 --- a/arch/mips/au1000/pb1100/init.c +++ b/arch/mips/au1000/pb1100/init.c @@ -54,7 +54,7 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c index 09fd63b8606..e9b2a0fd48a 100644 --- a/arch/mips/au1000/pb1200/init.c +++ b/arch/mips/au1000/pb1200/init.c @@ -53,6 +53,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x08000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c index 49f51e16586..3b6e395cf95 100644 --- a/arch/mips/au1000/pb1500/init.c +++ b/arch/mips/au1000/pb1500/init.c @@ -53,6 +53,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c index 1b5f58434bb..e1055a13a1a 100644 --- a/arch/mips/au1000/pb1550/init.c +++ b/arch/mips/au1000/pb1550/init.c @@ -53,6 +53,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x08000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c index b849bf501c0..7516434760a 100644 --- a/arch/mips/au1000/xxs1500/init.c +++ b/arch/mips/au1000/xxs1500/init.c @@ -53,6 +53,6 @@ void __init prom_init(void) if (!memsize_str) memsize = 0x04000000; else - memsize = strict_strtol(memsize_str, 0, NULL); + strict_strtol(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } -- GitLab From 8b32d6d00ca890ebb204da1260247c11bba042b3 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 29 Jul 2008 09:46:34 +0300 Subject: [PATCH 0424/1024] [MIPS] RB532: Flags are unsigned long A recent generic change now catches such bugs: <-- snip --> ... CC arch/mips/rb532/time.o cc1: warnings being treated as errors /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/rb532/time.c: In function 'plat_time_init': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/rb532/time.c:55: error: comparison of distinct pointer types lacks a cast /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/rb532/time.c:66: error: comparison of distinct pointer types lacks a cast make[2]: *** [arch/mips/rb532/time.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Ralf Baechle --- arch/mips/rb532/gpio.c | 5 +++-- arch/mips/rb532/time.c | 4 ++-- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index b2fe82dba0a..00a1c7877bf 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -64,7 +64,8 @@ static struct resource rb532_dev3_ctl_res[] = { void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val) { - unsigned flags, data; + unsigned long flags; + unsigned data; unsigned i = 0; spin_lock_irqsave(&dev3.lock, flags); @@ -90,7 +91,7 @@ EXPORT_SYMBOL(get_434_reg); void set_latch_u5(unsigned char or_mask, unsigned char nand_mask) { - unsigned flags; + unsigned long flags; spin_lock_irqsave(&dev3.lock, flags); diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c index db74edf8cef..8e7a46855b5 100644 --- a/arch/mips/rb532/time.c +++ b/arch/mips/rb532/time.c @@ -49,8 +49,8 @@ static unsigned long __init cal_r4koff(void) void __init plat_time_init(void) { - unsigned int est_freq, flags; - unsigned long r4k_offset; + unsigned int est_freq; + unsigned long flags, r4k_offset; local_irq_save(flags); -- GitLab From a0e31fb09056224c5d6fef09d25cb96b6149aa7c Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 24 Jul 2008 00:25:12 +0900 Subject: [PATCH 0425/1024] [MIPS] TXx9: Fix JMR3927 irq numbers * Fix wrong txx9_clockevent interrupt number * Fix TXX9_IRQ_BASE for JMR3927+FPCIB case Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/jmr3927/setup.c | 2 +- include/asm-mips/txx9irq.h | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 03647ebe413..57dc91e7afa 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -85,7 +85,7 @@ static void jmr3927_machine_power_off(void) static void __init jmr3927_time_init(void) { txx9_clockevent_init(TX3927_TMR_REG(0), - TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0), + JMR3927_IRQ_IRC_TMR(0), JMR3927_IMCLK); txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK); } diff --git a/include/asm-mips/txx9irq.h b/include/asm-mips/txx9irq.h index 1c439e51b87..5620879be37 100644 --- a/include/asm-mips/txx9irq.h +++ b/include/asm-mips/txx9irq.h @@ -14,8 +14,12 @@ #ifdef CONFIG_IRQ_CPU #define TXX9_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) #else +#ifdef CONFIG_I8259 +#define TXX9_IRQ_BASE (I8259A_IRQ_BASE + 16) +#else #define TXX9_IRQ_BASE 0 #endif +#endif #ifdef CONFIG_CPU_TX39XX #define TXx9_MAX_IR 16 -- GitLab From 32d00d0f933ea5d21c3cd0809461ebbf7ab89cef Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 24 Jul 2008 00:25:13 +0900 Subject: [PATCH 0426/1024] [MIPS] TXx9: PCI fixes for tx3927/tx4927 * Fix tx3927 pci ops for Type-1 configuration * Fix abort checking of tx3927 pci ops * Flush write buffer to avoid spurious PCI error interrupt * Add a quirk for FPCIB backplane Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/pci/ops-tx3927.c | 46 ++++++++++++++++---------------------- arch/mips/pci/ops-tx4927.c | 34 ++++++++++++++++++++++++++++ 2 files changed, 53 insertions(+), 27 deletions(-) diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c index 8a17a39e5bf..c6bd79e71e2 100644 --- a/arch/mips/pci/ops-tx3927.c +++ b/arch/mips/pci/ops-tx3927.c @@ -41,41 +41,41 @@ #include #include -static inline int mkaddr(unsigned char bus, unsigned char dev_fn, - unsigned char where) +static int mkaddr(struct pci_bus *bus, unsigned char devfn, unsigned char where) { - if (bus == 0 && dev_fn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0)) - return PCIBIOS_DEVICE_NOT_FOUND; - - tx3927_pcicptr->ica = ((bus & 0xff) << 0x10) | - ((dev_fn & 0xff) << 0x08) | - (where & 0xfc); + if (bus->parent == NULL && + devfn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0)) + return -1; + tx3927_pcicptr->ica = + ((bus->number & 0xff) << 0x10) | + ((devfn & 0xff) << 0x08) | + (where & 0xfc) | (bus->parent ? 1 : 0); /* clear M_ABORT and Disable M_ABORT Int. */ tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT; tx3927_pcicptr->pcistatim &= ~PCI_STATUS_REC_MASTER_ABORT; - - return PCIBIOS_SUCCESSFUL; + return 0; } static inline int check_abort(void) { - if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) + if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) { tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT; tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT; + /* flush write buffer */ + iob(); return PCIBIOS_DEVICE_NOT_FOUND; - + } return PCIBIOS_SUCCESSFUL; } static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) { - int ret; - - ret = mkaddr(bus->number, devfn, where); - if (ret) - return ret; + if (mkaddr(bus, devfn, where)) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } switch (size) { case 1: @@ -97,11 +97,8 @@ static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - int ret; - - ret = mkaddr(bus->number, devfn, where); - if (ret) - return ret; + if (mkaddr(bus, devfn, where)) + return PCIBIOS_DEVICE_NOT_FOUND; switch (size) { case 1: @@ -117,11 +114,6 @@ static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, tx3927_pcicptr->icd = cpu_to_le32(val); } - if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) - tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT; - tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT; - return PCIBIOS_DEVICE_NOT_FOUND; - return check_abort(); } diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index c6b49bccd27..6d844094ef5 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -85,6 +85,8 @@ static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr) __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT << 16), &pcicptr->pcistatus); + /* flush write buffer */ + iob(); code = PCIBIOS_DEVICE_NOT_FOUND; } return code; @@ -406,3 +408,35 @@ void tx4927_report_pcic_status(void) tx4927_report_pcic_status1(pcicptrs[i].pcicptr); } } + +#ifdef CONFIG_TOSHIBA_FPCIB0 +static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev) +{ + struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus); + + if (!pcicptr) + return; + if (__raw_readl(&pcicptr->pbacfg) & TX4927_PCIC_PBACFG_PBAEN) { + /* Reset Bus Arbiter */ + __raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg); + /* + * swap reqBP and reqXP (raise priority of SLC90E66). + * SLC90E66(PCI-ISA bridge) is connected to REQ2 on + * PCI Backplane board. + */ + __raw_writel(0x72543610, &pcicptr->pbareqport); + __raw_writel(0, &pcicptr->pbabm); + /* Use Fixed ParkMaster (required by SLC90E66) */ + __raw_writel(TX4927_PCIC_PBACFG_FIXPA, &pcicptr->pbacfg); + /* Enable Bus Arbiter */ + __raw_writel(TX4927_PCIC_PBACFG_FIXPA | + TX4927_PCIC_PBACFG_PBAEN, + &pcicptr->pbacfg); + printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n", + __raw_readl(&pcicptr->pbareqport)); + } +} +#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460 +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0, + tx4927_quirk_slc90e66_bridge); +#endif -- GitLab From 47a5c976486e407fc0d0bc8fa165132b6f9bec26 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 24 Jul 2008 00:25:14 +0900 Subject: [PATCH 0427/1024] [MIPS] Introduce pcibios_plat_setup Introduce pcibios_plat_setup for platform-specific pcibios_setup. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/pci/pci.c | 6 +++++- include/asm-mips/pci.h | 2 ++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 77bd5b68dc4..c7fe6ec621e 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -328,7 +328,11 @@ EXPORT_SYMBOL(PCIBIOS_MIN_IO); EXPORT_SYMBOL(PCIBIOS_MIN_MEM); #endif -char *pcibios_setup(char *str) +char * (*pcibios_plat_setup)(char *str) __devinitdata; + +char *__devinit pcibios_setup(char *str) { + if (pcibios_plat_setup) + return pcibios_plat_setup(str); return str; } diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h index c205875d7f3..5510c53b7fe 100644 --- a/include/asm-mips/pci.h +++ b/include/asm-mips/pci.h @@ -174,4 +174,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) extern int pci_probe_only; +extern char * (*pcibios_plat_setup)(char *str); + #endif /* _ASM_PCI_H */ -- GitLab From 07517529225ae4ce770271f83d8cd1004733a01d Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 24 Jul 2008 00:25:15 +0900 Subject: [PATCH 0428/1024] [MIPS] TXx9: Add some pci options Add pci options for backplane type, clock selection, error handling, timeout values. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/pci/ops-tx4927.c | 22 ++++++++++++++++++ arch/mips/txx9/generic/pci.c | 36 ++++++++++++++++++++++++++++++ arch/mips/txx9/generic/setup.c | 4 ++++ arch/mips/txx9/rbtx4927/setup.c | 1 + arch/mips/txx9/rbtx4938/setup.c | 1 + include/asm-mips/txx9/pci.h | 3 +++ include/asm-mips/txx9/tx4927pcic.h | 1 + 7 files changed, 68 insertions(+) diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index 6d844094ef5..038e311b069 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -194,6 +194,28 @@ static struct { .gbwc = 0xfe0, /* 4064 GBUSCLK for CCFG.GTOT=0b11 */ }; +char *__devinit tx4927_pcibios_setup(char *str) +{ + unsigned long val; + + if (!strncmp(str, "trdyto=", 7)) { + if (strict_strtoul(str + 7, 0, &val) == 0) + tx4927_pci_opts.trdyto = val; + return NULL; + } + if (!strncmp(str, "retryto=", 8)) { + if (strict_strtoul(str + 8, 0, &val) == 0) + tx4927_pci_opts.retryto = val; + return NULL; + } + if (!strncmp(str, "gbwc=", 5)) { + if (strict_strtoul(str + 5, 0, &val) == 0) + tx4927_pci_opts.gbwc = val; + return NULL; + } + return str; +} + void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, struct pci_controller *channel, int extarb) { diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c index 0b92d8c1320..7b637a7c0e6 100644 --- a/arch/mips/txx9/generic/pci.c +++ b/arch/mips/txx9/generic/pci.c @@ -386,3 +386,39 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return txx9_board_vec->pci_map_irq(dev, slot, pin); } + +char * (*txx9_board_pcibios_setup)(char *str) __devinitdata; + +char *__devinit txx9_pcibios_setup(char *str) +{ + if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str)) + return NULL; + if (!strcmp(str, "picmg")) { + /* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX + (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */ + txx9_pci_option |= TXX9_PCI_OPT_PICMG; + return NULL; + } else if (!strcmp(str, "nopicmg")) { + /* non-PICMG compliant backplane (TOSHIBA + RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */ + txx9_pci_option &= ~TXX9_PCI_OPT_PICMG; + return NULL; + } else if (!strncmp(str, "clk=", 4)) { + char *val = str + 4; + txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK; + if (strcmp(val, "33") == 0) + txx9_pci_option |= TXX9_PCI_OPT_CLK_33; + else if (strcmp(val, "66") == 0) + txx9_pci_option |= TXX9_PCI_OPT_CLK_66; + else /* "auto" */ + txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO; + return NULL; + } else if (!strncmp(str, "err=", 4)) { + if (!strcmp(str + 4, "panic")) + txx9_pci_err_action = TXX9_PCI_ERR_PANIC; + else if (!strcmp(str + 4, "ignore")) + txx9_pci_err_action = TXX9_PCI_ERR_IGNORE; + return NULL; + } + return str; +} diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 8c60c78b9a9..4fbd7baa703 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -23,6 +23,7 @@ #include #include #include +#include #ifdef CONFIG_CPU_TX49XX #include #endif @@ -194,6 +195,9 @@ void __init plat_mem_setup(void) ioport_resource.end = ~0UL; /* no limit */ iomem_resource.start = 0; iomem_resource.end = ~0UL; /* no limit */ +#ifdef CONFIG_PCI + pcibios_plat_setup = txx9_pcibios_setup; +#endif txx9_board_vec->mem_setup(); } diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 3da20ea3e55..88c05ccee3b 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -238,6 +238,7 @@ static void __init rbtx4927_mem_setup(void) txx9_alloc_pci_controller(&txx9_primary_pcic, RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE, RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE); + txx9_board_pcibios_setup = tx4927_pcibios_setup; #else set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET); #endif diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 6c2b99bb8af..fc9034db526 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -193,6 +193,7 @@ static void __init rbtx4938_mem_setup(void) #ifdef CONFIG_PCI txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0); + txx9_board_pcibios_setup = tx4927_pcibios_setup; #else set_io_port_base(RBTX4938_ETHER_BASE); #endif diff --git a/include/asm-mips/txx9/pci.h b/include/asm-mips/txx9/pci.h index d89a45091e2..3d32529060a 100644 --- a/include/asm-mips/txx9/pci.h +++ b/include/asm-mips/txx9/pci.h @@ -33,4 +33,7 @@ enum txx9_pci_err_action { }; extern enum txx9_pci_err_action txx9_pci_err_action; +extern char * (*txx9_board_pcibios_setup)(char *str); +char *txx9_pcibios_setup(char *str); + #endif /* __ASM_TXX9_PCI_H */ diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h index d61c3d09c4a..e1d78e9ebc0 100644 --- a/include/asm-mips/txx9/tx4927pcic.h +++ b/include/asm-mips/txx9/tx4927pcic.h @@ -195,5 +195,6 @@ struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr( void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, struct pci_controller *channel, int extarb); void tx4927_report_pcic_status(void); +char *tx4927_pcibios_setup(char *str); #endif /* __ASM_TXX9_TX4927PCIC_H */ -- GitLab From 455cc256eb23915100e203fb33ee143afd127954 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 25 Jul 2008 23:01:35 +0900 Subject: [PATCH 0429/1024] [MIPS] TXx9: PCI error handling From: Atsushi Nemoto Date: Thu, 24 Jul 2008 00:25:16 +0900 Subject: [PATCH] txx9: PCI error handling Add more control and detailed report on PCI error interrupt. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/pci/ops-tx3927.c | 34 ++++++++++++++++ arch/mips/pci/ops-tx4927.c | 62 ++++++++++++++++++++++++++++++ arch/mips/pci/pci-tx4927.c | 10 +++++ arch/mips/pci/pci-tx4938.c | 10 +++++ arch/mips/txx9/jmr3927/irq.c | 20 ---------- arch/mips/txx9/jmr3927/setup.c | 1 + arch/mips/txx9/rbtx4927/setup.c | 2 + arch/mips/txx9/rbtx4938/setup.c | 1 + include/asm-mips/txx9/tx3927.h | 7 ++++ include/asm-mips/txx9/tx4927.h | 1 + include/asm-mips/txx9/tx4927pcic.h | 3 ++ include/asm-mips/txx9/tx4938.h | 1 + 12 files changed, 132 insertions(+), 20 deletions(-) diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c index c6bd79e71e2..31c15019659 100644 --- a/arch/mips/pci/ops-tx3927.c +++ b/arch/mips/pci/ops-tx3927.c @@ -37,8 +37,11 @@ #include #include #include +#include #include +#include +#include #include static int mkaddr(struct pci_bus *bus, unsigned char devfn, unsigned char where) @@ -194,3 +197,34 @@ void __init tx3927_pcic_setup(struct pci_controller *channel, PCI_COMMAND_PARITY | PCI_COMMAND_SERR; local_irq_restore(flags); } + +static irqreturn_t tx3927_pcierr_interrupt(int irq, void *dev_id) +{ + struct pt_regs *regs = get_irq_regs(); + + if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) { + printk(KERN_WARNING "PCI error interrupt at 0x%08lx.\n", + regs->cp0_epc); + printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n", + tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat); + } + if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) { + /* clear all pci errors */ + tx3927_pcicptr->pcistat |= TX3927_PCIC_PCISTATIM_ALL; + tx3927_pcicptr->istat = TX3927_PCIC_IIM_ALL; + tx3927_pcicptr->tstat = TX3927_PCIC_TIM_ALL; + tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL; + return IRQ_HANDLED; + } + console_verbose(); + panic("PCI error."); +} + +void __init tx3927_setup_pcierr_irq(void) +{ + if (request_irq(TXX9_IRQ_BASE + TX3927_IR_PCI, + tx3927_pcierr_interrupt, + IRQF_DISABLED, "PCI error", + (void *)TX3927_PCIC_REG)) + printk(KERN_WARNING "Failed to request irq for PCIERR\n"); +} diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index 038e311b069..5989e747527 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -16,6 +16,8 @@ * option) any later version. */ #include +#include +#include #include static struct { @@ -431,6 +433,66 @@ void tx4927_report_pcic_status(void) } } +static void tx4927_dump_pcic_settings1(struct tx4927_pcic_reg __iomem *pcicptr) +{ + int i; + __u32 __iomem *preg = (__u32 __iomem *)pcicptr; + + printk(KERN_INFO "tx4927 pcic (0x%p) settings:", pcicptr); + for (i = 0; i < sizeof(struct tx4927_pcic_reg); i += 4, preg++) { + if (i % 32 == 0) { + printk(KERN_CONT "\n"); + printk(KERN_INFO "%04x:", i); + } + /* skip registers with side-effects */ + if (i == offsetof(struct tx4927_pcic_reg, g2pintack) + || i == offsetof(struct tx4927_pcic_reg, g2pspc) + || i == offsetof(struct tx4927_pcic_reg, g2pcfgadrs) + || i == offsetof(struct tx4927_pcic_reg, g2pcfgdata)) { + printk(KERN_CONT " XXXXXXXX"); + continue; + } + printk(KERN_CONT " %08x", __raw_readl(preg)); + } + printk(KERN_CONT "\n"); +} + +void tx4927_dump_pcic_settings(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) { + if (pcicptrs[i].pcicptr) + tx4927_dump_pcic_settings1(pcicptrs[i].pcicptr); + } +} + +irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id) +{ + struct pt_regs *regs = get_irq_regs(); + struct tx4927_pcic_reg __iomem *pcicptr = + (struct tx4927_pcic_reg __iomem *)(unsigned long)dev_id; + + if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) { + printk(KERN_WARNING "PCIERR interrupt at 0x%0*lx\n", + (int)(2 * sizeof(unsigned long)), regs->cp0_epc); + tx4927_report_pcic_status1(pcicptr); + } + if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) { + /* clear all pci errors */ + __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff) + | (TX4927_PCIC_PCISTATUS_ALL << 16), + &pcicptr->pcistatus); + __raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus); + __raw_writel(TX4927_PCIC_PBASTATUS_ALL, &pcicptr->pbastatus); + __raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus); + return IRQ_HANDLED; + } + console_verbose(); + tx4927_dump_pcic_settings1(pcicptr); + panic("PCI error."); +} + #ifdef CONFIG_TOSHIBA_FPCIB0 static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev) { diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c index 27e86a09dd4..aaa90059679 100644 --- a/arch/mips/pci/pci-tx4927.c +++ b/arch/mips/pci/pci-tx4927.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -81,3 +82,12 @@ int __init tx4927_pciclk66_setup(void) pciclk = -1; return pciclk; } + +void __init tx4927_setup_pcierr_irq(void) +{ + if (request_irq(TXX9_IRQ_BASE + TX4927_IR_PCIERR, + tx4927_pcierr_interrupt, + IRQF_DISABLED, "PCI error", + (void *)TX4927_PCIC_REG)) + printk(KERN_WARNING "Failed to request irq for PCIERR\n"); +} diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c index e5375511c2b..60e2c52c2c5 100644 --- a/arch/mips/pci/pci-tx4938.c +++ b/arch/mips/pci/pci-tx4938.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -132,3 +133,12 @@ int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot) } return -1; } + +void __init tx4938_setup_pcierr_irq(void) +{ + if (request_irq(TXX9_IRQ_BASE + TX4938_IR_PCIERR, + tx4927_pcierr_interrupt, + IRQF_DISABLED, "PCI error", + (void *)TX4927_PCIC_REG)) + printk(KERN_WARNING "Failed to request irq for PCIERR\n"); +} diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c index 070c9a115e5..f3b60233e99 100644 --- a/arch/mips/txx9/jmr3927/irq.c +++ b/arch/mips/txx9/jmr3927/irq.c @@ -103,22 +103,6 @@ static int jmr3927_irq_dispatch(int pending) return irq; } -#ifdef CONFIG_PCI -static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id) -{ - printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq); - printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n", - tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat); - - return IRQ_HANDLED; -} -static struct irqaction pcierr_action = { - .handler = jmr3927_pcierr_interrupt, - .mask = CPU_MASK_NONE, - .name = "PCI error", -}; -#endif - static void __init jmr3927_irq_init(void); void __init jmr3927_irq_setup(void) @@ -143,10 +127,6 @@ void __init jmr3927_irq_setup(void) /* setup IOC interrupt 1 (PCI, MODEM) */ set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq); -#ifdef CONFIG_PCI - setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action); -#endif - /* enable all CPU interrupt bits. */ set_c0_status(ST0_IM); /* IE bit is still 0. */ } diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 57dc91e7afa..7c16c402ff6 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -199,6 +199,7 @@ static void __init jmr3927_pci_setup(void) jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); } tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb); + tx3927_setup_pcierr_irq(); #endif /* CONFIG_PCI */ } diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 88c05ccee3b..65b72247d32 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -103,6 +103,7 @@ static void __init tx4927_pci_setup(void) tx4927_report_pciclk(); tx4927_pcic_setup(tx4927_pcicptr, c, extarb); } + tx4927_setup_pcierr_irq(); } static void __init tx4937_pci_setup(void) @@ -149,6 +150,7 @@ static void __init tx4937_pci_setup(void) tx4938_report_pciclk(); tx4927_pcic_setup(tx4938_pcicptr, c, extarb); } + tx4938_setup_pcierr_irq(); } static void __init rbtx4927_arch_init(void) diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index fc9034db526..4454b7901cd 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -121,6 +121,7 @@ static void __init rbtx4938_pci_setup(void) register_pci_controller(c); tx4927_pcic_setup(tx4938_pcic1ptr, c, 0); } + tx4938_setup_pcierr_irq(); #endif /* CONFIG_PCI */ } diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h index ea79e1b16e7..8d62b1ba2c1 100644 --- a/include/asm-mips/txx9/tx3927.h +++ b/include/asm-mips/txx9/tx3927.h @@ -236,11 +236,17 @@ struct tx3927_ccfg_reg { /* see PCI_STATUS_XXX in linux/pci.h */ #define PCI_STATUS_NEW_CAP 0x0010 +/* bits for ISTAT/IIM */ +#define TX3927_PCIC_IIM_ALL 0x00001600 + /* bits for TC */ #define TX3927_PCIC_TC_OF16E 0x00000020 #define TX3927_PCIC_TC_IF8E 0x00000010 #define TX3927_PCIC_TC_OF8E 0x00000008 +/* bits for TSTAT/TIM */ +#define TX3927_PCIC_TIM_ALL 0x0003ffff + /* bits for IOBA/MBA */ /* see PCI_BASE_ADDRESS_XXX in linux/pci.h */ @@ -320,5 +326,6 @@ struct tx3927_ccfg_reg { struct pci_controller; void __init tx3927_pcic_setup(struct pci_controller *channel, unsigned long sdram_size, int extarb); +void tx3927_setup_pcierr_irq(void); #endif /* __ASM_TXX9_TX3927_H */ diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h index ceb4b79ff4e..2c26fd17cb4 100644 --- a/include/asm-mips/txx9/tx4927.h +++ b/include/asm-mips/txx9/tx4927.h @@ -249,6 +249,7 @@ void tx4927_time_init(unsigned int tmrnr); void tx4927_setup_serial(void); int tx4927_report_pciclk(void); int tx4927_pciclk66_setup(void); +void tx4927_setup_pcierr_irq(void); void tx4927_irq_init(void); #endif /* __ASM_TXX9_TX4927_H */ diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h index e1d78e9ebc0..223841c5613 100644 --- a/include/asm-mips/txx9/tx4927pcic.h +++ b/include/asm-mips/txx9/tx4927pcic.h @@ -10,6 +10,7 @@ #define __ASM_TXX9_TX4927PCIC_H #include +#include struct tx4927_pcic_reg { u32 pciid; @@ -196,5 +197,7 @@ void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, struct pci_controller *channel, int extarb); void tx4927_report_pcic_status(void); char *tx4927_pcibios_setup(char *str); +void tx4927_dump_pcic_settings(void); +irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id); #endif /* __ASM_TXX9_TX4927PCIC_H */ diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h index 1ed969d381d..4fff1c9e08d 100644 --- a/include/asm-mips/txx9/tx4938.h +++ b/include/asm-mips/txx9/tx4938.h @@ -285,6 +285,7 @@ void tx4938_report_pci1clk(void); int tx4938_pciclk66_setup(void); struct pci_dev; int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot); +void tx4938_setup_pcierr_irq(void); void tx4938_irq_init(void); #endif -- GitLab From a49297e8fc8a9a835ac4ec124aa83028abdcc7d5 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 24 Jul 2008 00:25:17 +0900 Subject: [PATCH 0430/1024] [MIPS] TXx9: Cleanup restart/halt/power_off Unify machine_restart/machine_halt/pm_power_off and add fallback machine_halt routine. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 26 ++++++++++++++++++++++++++ arch/mips/txx9/jmr3927/setup.c | 29 ++++------------------------- arch/mips/txx9/rbtx4927/setup.c | 33 ++------------------------------- arch/mips/txx9/rbtx4938/setup.c | 26 ++------------------------ 4 files changed, 34 insertions(+), 80 deletions(-) diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 4fbd7baa703..82272e85a04 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #ifdef CONFIG_CPU_TX49XX @@ -188,6 +189,25 @@ char * __init prom_getcmdline(void) return &(arcs_cmdline[0]); } +static void __noreturn txx9_machine_halt(void) +{ + local_irq_disable(); + clear_c0_status(ST0_IM); + while (1) { + if (cpu_wait) { + (*cpu_wait)(); + if (cpu_has_counter) { + /* + * Clear counter interrupt while it + * breaks WAIT instruction even if + * masked. + */ + write_c0_compare(0); + } + } + } +} + /* wrappers */ void __init plat_mem_setup(void) { @@ -195,6 +215,12 @@ void __init plat_mem_setup(void) ioport_resource.end = ~0UL; /* no limit */ iomem_resource.start = 0; iomem_resource.end = ~0UL; /* no limit */ + + /* fallback restart/halt routines */ + _machine_restart = (void (*)(char *))txx9_machine_halt; + _machine_halt = txx9_machine_halt; + pm_power_off = txx9_machine_halt; + #ifdef CONFIG_PCI pcibios_plat_setup = txx9_pcibios_setup; #endif diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 7c16c402ff6..fa0503efc84 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -32,7 +32,6 @@ #include #include #include -#include #include #include #ifdef CONFIG_SERIAL_TXX9 @@ -46,13 +45,12 @@ #include #include -extern void puts(const char *cp); - /* don't enable - see errata */ static int jmr3927_ccfg_toeon; -static inline void do_reset(void) +static void jmr3927_machine_restart(char *command) { + local_irq_disable(); #if 1 /* Resetting PCI bus */ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR); @@ -61,25 +59,8 @@ static inline void do_reset(void) jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); #endif jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR); -} - -static void jmr3927_machine_restart(char *command) -{ - local_irq_disable(); - puts("Rebooting..."); - do_reset(); -} - -static void jmr3927_machine_halt(void) -{ - puts("JMR-TX3927 halted.\n"); - while (1); -} - -static void jmr3927_machine_power_off(void) -{ - puts("JMR-TX3927 halted. Please turn off the power.\n"); - while (1); + /* fallback */ + (*_machine_halt)(); } static void __init jmr3927_time_init(void) @@ -102,8 +83,6 @@ static void __init jmr3927_mem_setup(void) set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO); _machine_restart = jmr3927_machine_restart; - _machine_halt = jmr3927_machine_halt; - pm_power_off = jmr3927_machine_power_off; /* Reboot on panic */ panic_timeout = 180; diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 65b72247d32..54c33c3e9f7 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -47,11 +47,9 @@ #include #include #include -#include #include #include #include -#include #include #include #include @@ -167,17 +165,8 @@ static void __init rbtx4937_arch_init(void) #define rbtx4937_arch_init NULL #endif /* CONFIG_PCI */ -static void __noreturn wait_forever(void) -{ - while (1) - if (cpu_wait) - (*cpu_wait)(); -} - static void toshiba_rbtx4927_restart(char *command) { - printk(KERN_NOTICE "System Rebooting...\n"); - /* enable the s/w reset register */ writeb(1, rbtx4927_softresetlock_addr); @@ -188,24 +177,8 @@ static void toshiba_rbtx4927_restart(char *command) /* do a s/w reset */ writeb(1, rbtx4927_softreset_addr); - /* do something passive while waiting for reset */ - local_irq_disable(); - wait_forever(); - /* no return */ -} - -static void toshiba_rbtx4927_halt(void) -{ - printk(KERN_NOTICE "System Halted\n"); - local_irq_disable(); - wait_forever(); - /* no return */ -} - -static void toshiba_rbtx4927_power_off(void) -{ - toshiba_rbtx4927_halt(); - /* no return */ + /* fallback */ + (*_machine_halt)(); } static void __init rbtx4927_clock_init(void); @@ -233,8 +206,6 @@ static void __init rbtx4927_mem_setup(void) } _machine_restart = toshiba_rbtx4927_restart; - _machine_halt = toshiba_rbtx4927_halt; - pm_power_off = toshiba_rbtx4927_power_off; #ifdef CONFIG_PCI txx9_alloc_pci_controller(&txx9_primary_pcic, diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 4454b7901cd..e1177b3b910 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include @@ -28,33 +27,14 @@ #include #include -static void rbtx4938_machine_halt(void) -{ - printk(KERN_NOTICE "System Halted\n"); - local_irq_disable(); - - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -static void rbtx4938_machine_power_off(void) -{ - rbtx4938_machine_halt(); - /* no return */ -} - static void rbtx4938_machine_restart(char *command) { local_irq_disable(); - - printk("Rebooting..."); writeb(1, rbtx4938_softresetlock_addr); writeb(1, rbtx4938_sfvol_addr); writeb(1, rbtx4938_softreset_addr); - while(1) - ; + /* fallback */ + (*_machine_halt)(); } static void __init rbtx4938_pci_setup(void) @@ -263,8 +243,6 @@ static void __init rbtx4938_mem_setup(void) printk("request resource for fpga failed\n"); _machine_restart = rbtx4938_machine_restart; - _machine_halt = rbtx4938_machine_halt; - pm_power_off = rbtx4938_machine_power_off; writeb(0xff, rbtx4938_led_addr); printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", -- GitLab From 683147254ef7e69ebbbe55280ba6a3c5ae2325d8 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 24 Jul 2008 00:25:18 +0900 Subject: [PATCH 0431/1024] [MIPS] TXx9: Cleanup watchdog Unify registration of txx9wdt platform device. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 12 ++++++++++++ arch/mips/txx9/generic/setup_tx4927.c | 7 ++++++- arch/mips/txx9/generic/setup_tx4938.c | 7 ++++++- arch/mips/txx9/jmr3927/setup.c | 20 +++----------------- arch/mips/txx9/rbtx4927/setup.c | 21 +-------------------- arch/mips/txx9/rbtx4938/setup.c | 21 +-------------------- include/asm-mips/txx9/generic.h | 1 + include/asm-mips/txx9/tx4927.h | 2 +- include/asm-mips/txx9/tx4938.h | 2 +- 9 files changed, 32 insertions(+), 61 deletions(-) diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 82272e85a04..7b5705d18de 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -208,6 +209,17 @@ static void __noreturn txx9_machine_halt(void) } } +/* Watchdog support */ +void __init txx9_wdt_init(unsigned long base) +{ + struct resource res = { + .start = base, + .end = base + 0x100 - 1, + .flags = IORESOURCE_MEM, + }; + platform_device_register_simple("txx9wdt", -1, &res, 1); +} + /* wrappers */ void __init plat_mem_setup(void) { diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index 89d6e28add9..b42c85573d0 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -21,7 +21,7 @@ #include #include -void __init tx4927_wdr_init(void) +static void __init tx4927_wdr_init(void) { /* clear WatchDogReset (W1C) */ tx4927_ccfg_set(TX4927_CCFG_WDRST); @@ -29,6 +29,11 @@ void __init tx4927_wdr_init(void) tx4927_ccfg_set(TX4927_CCFG_WR); } +void __init tx4927_wdt_init(void) +{ + txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); +} + static struct resource tx4927_sdram_resource[4]; void __init tx4927_setup(void) diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index 317378d8579..b0a3dc8863f 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -21,7 +21,7 @@ #include #include -void __init tx4938_wdr_init(void) +static void __init tx4938_wdr_init(void) { /* clear WatchDogReset (W1C) */ tx4938_ccfg_set(TX4938_CCFG_WDRST); @@ -29,6 +29,11 @@ void __init tx4938_wdr_init(void) tx4938_ccfg_set(TX4938_CCFG_WR); } +void __init tx4938_wdt_init(void) +{ + txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); +} + static struct resource tx4938_sdram_resource[4]; static struct resource tx4938_sram_resource; diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index fa0503efc84..ae34e9a4a8a 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -308,30 +308,16 @@ static int __init jmr3927_rtc_init(void) return IS_ERR(dev) ? PTR_ERR(dev) : 0; } -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init jmr3927_wdt_init(void) +static void __init tx3927_wdt_init(void) { - return txx9_wdt_init(TX3927_TMR_REG(2)); + txx9_wdt_init(TX3927_TMR_REG(2)); } static void __init jmr3927_device_init(void) { __swizzle_addr_b = jmr3927_swizzle_addr_b; jmr3927_rtc_init(); - jmr3927_wdt_init(); + tx3927_wdt_init(); } struct txx9_board_vec jmr3927_vec __initdata = { diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 54c33c3e9f7..f01af382e9a 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -328,30 +328,11 @@ static int __init rbtx4927_ne_init(void) return IS_ERR(dev) ? PTR_ERR(dev) : 0; } -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init rbtx4927_wdt_init(void) -{ - return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); -} - static void __init rbtx4927_device_init(void) { toshiba_rbtx4927_rtc_init(); rbtx4927_ne_init(); - rbtx4927_wdt_init(); + tx4927_wdt_init(); } struct txx9_board_vec rbtx4927_vec __initdata = { diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index e1177b3b910..ff5fda2151f 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -352,30 +352,11 @@ static void __init rbtx4938_arch_init(void) rbtx4938_spi_init(); } -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init rbtx4938_wdt_init(void) -{ - return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); -} - static void __init rbtx4938_device_init(void) { rbtx4938_ethaddr_init(); rbtx4938_ne_init(); - rbtx4938_wdt_init(); + tx4938_wdt_init(); } struct txx9_board_vec rbtx4938_vec __initdata = { diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index cbae37ec3d8..2b34d09e34c 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -44,5 +44,6 @@ extern struct txx9_board_vec *txx9_board_vec; extern int (*txx9_irq_dispatch)(int pending); void prom_init_cmdline(void); char *prom_getcmdline(void); +void txx9_wdt_init(unsigned long base); #endif /* __ASM_TXX9_GENERIC_H */ diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h index 2c26fd17cb4..3d9fd7dcb33 100644 --- a/include/asm-mips/txx9/tx4927.h +++ b/include/asm-mips/txx9/tx4927.h @@ -243,7 +243,7 @@ static inline void tx4927_ccfg_change(__u64 change, __u64 new) } unsigned int tx4927_get_mem_size(void); -void tx4927_wdr_init(void); +void tx4927_wdt_init(void); void tx4927_setup(void); void tx4927_time_init(unsigned int tmrnr); void tx4927_setup_serial(void); diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h index 4fff1c9e08d..d5d7cef7ee8 100644 --- a/include/asm-mips/txx9/tx4938.h +++ b/include/asm-mips/txx9/tx4938.h @@ -276,7 +276,7 @@ struct tx4938_ccfg_reg { #define TX4938_EBUSC_SIZE(ch) TX4927_EBUSC_SIZE(ch) #define tx4938_get_mem_size() tx4927_get_mem_size() -void tx4938_wdr_init(void); +void tx4938_wdt_init(void); void tx4938_setup(void); void tx4938_time_init(unsigned int tmrnr); void tx4938_setup_serial(void); -- GitLab From f6727fb889c664be094fa041a0fdf0f1a1caefb6 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 24 Jul 2008 00:25:19 +0900 Subject: [PATCH 0432/1024] [MIPS] TXx9: Make tx3927-specific code more independent Make some TX3927 SoC specific code independent from board specific code. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/Makefile | 1 + arch/mips/txx9/generic/irq_tx3927.c | 25 +++++ arch/mips/txx9/generic/setup_tx3927.c | 141 ++++++++++++++++++++++++++ arch/mips/txx9/jmr3927/irq.c | 43 +++----- arch/mips/txx9/jmr3927/setup.c | 136 ++++--------------------- include/asm-mips/txx9/jmr3927.h | 2 - include/asm-mips/txx9/tx3927.h | 12 ++- 7 files changed, 207 insertions(+), 153 deletions(-) create mode 100644 arch/mips/txx9/generic/irq_tx3927.c create mode 100644 arch/mips/txx9/generic/setup_tx3927.c diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index 9c120771e65..57ed07bf030 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -4,6 +4,7 @@ obj-y += setup.o obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_SOC_TX3927) += setup_tx3927.o irq_tx3927.o obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o setup_tx4927.o irq_tx4927.o obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o diff --git a/arch/mips/txx9/generic/irq_tx3927.c b/arch/mips/txx9/generic/irq_tx3927.c new file mode 100644 index 00000000000..c683f593eda --- /dev/null +++ b/arch/mips/txx9/generic/irq_tx3927.c @@ -0,0 +1,25 @@ +/* + * Common tx3927 irq handler + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright 2001 MontaVista Software Inc. + * Copyright (C) 2000-2001 Toshiba Corporation + */ +#include +#include +#include + +void __init tx3927_irq_init(void) +{ + int i; + + txx9_irq_init(TX3927_IRC_REG); + /* raise priority for timers, sio */ + for (i = 0; i < TX3927_NR_TMR; i++) + txx9_irq_set_pri(TX3927_IR_TMR(i), 6); + for (i = 0; i < TX3927_NR_SIO; i++) + txx9_irq_set_pri(TX3927_IR_SIO(i), 7); +} diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c new file mode 100644 index 00000000000..0d09a0ff71e --- /dev/null +++ b/arch/mips/txx9/generic/setup_tx3927.c @@ -0,0 +1,141 @@ +/* + * TX3927 setup routines + * Based on linux/arch/mips/txx9/jmr3927/setup.c + * + * Copyright 2001 MontaVista Software Inc. + * Copyright (C) 2000-2001 Toshiba Corporation + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +void __init tx3927_wdt_init(void) +{ + txx9_wdt_init(TX3927_TMR_REG(2)); +} + +void __init tx3927_setup(void) +{ + int i; + unsigned int conf; + + /* don't enable - see errata */ + txx9_ccfg_toeon = 0; + if (strstr(prom_getcmdline(), "toeon") != NULL) + txx9_ccfg_toeon = 1; + + txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE, + TX3927_REG_SIZE); + + /* SDRAMC,ROMC are configured by PROM */ + for (i = 0; i < 8; i++) { + if (!(tx3927_romcptr->cr[i] & 0x8)) + continue; /* disabled */ + txx9_ce_res[i].start = (unsigned long)TX3927_ROMC_BA(i); + txx9_ce_res[i].end = + txx9_ce_res[i].start + TX3927_ROMC_SIZE(i) - 1; + request_resource(&iomem_resource, &txx9_ce_res[i]); + } + + /* clocks */ + txx9_gbus_clock = txx9_cpu_clock / 2; + /* change default value to udelay/mdelay take reasonable time */ + loops_per_jiffy = txx9_cpu_clock / HZ / 2; + + /* CCFG */ + /* enable Timeout BusError */ + if (txx9_ccfg_toeon) + tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE; + + /* clear BusErrorOnWrite flag */ + tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; + if (read_c0_conf() & TX39_CONF_WBON) + /* Disable PCI snoop */ + tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; + else + /* Enable PCI SNOOP - with write through only */ + tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP; + /* do reset on watchdog */ + tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR; + + printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n", + tx3927_ccfgptr->crir, + tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); + + /* TMR */ + for (i = 0; i < TX3927_NR_TMR; i++) + txx9_tmr_init(TX3927_TMR_REG(i)); + + /* DMA */ + tx3927_dmaptr->mcr = 0; + for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) { + /* reset channel */ + tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; + tx3927_dmaptr->ch[i].ccr = 0; + } + /* enable DMA */ +#ifdef __BIG_ENDIAN + tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN; +#else + tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; +#endif + + /* PIO */ + __raw_writel(0, &tx3927_pioptr->maskcpu); + __raw_writel(0, &tx3927_pioptr->maskext); + txx9_gpio_init(TX3927_PIO_REG, 0, 16); + + conf = read_c0_conf(); + if (!(conf & TX39_CONF_ICE)) + printk(KERN_INFO "TX3927 I-Cache disabled.\n"); + if (!(conf & TX39_CONF_DCE)) + printk(KERN_INFO "TX3927 D-Cache disabled.\n"); + else if (!(conf & TX39_CONF_WBON)) + printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n"); + else if (!(conf & TX39_CONF_CWFON)) + printk(KERN_INFO "TX3927 D-Cache WriteBack.\n"); + else + printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n"); +} + +void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr) +{ + txx9_clockevent_init(TX3927_TMR_REG(evt_tmrnr), + TXX9_IRQ_BASE + TX3927_IR_TMR(evt_tmrnr), + TXX9_IMCLK); + txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK); +} + +void __init tx3927_setup_serial(unsigned int cts_mask) +{ +#ifdef CONFIG_SERIAL_TXX9 + int i; + struct uart_port req; + + for (i = 0; i < 2; i++) { + memset(&req, 0, sizeof(req)); + req.line = i; + req.iotype = UPIO_MEM; + req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i); + req.mapbase = TX3927_SIO_REG(i); + req.irq = TXX9_IRQ_BASE + TX3927_IR_SIO(i); + if (!((1 << i) & cts_mask)) + req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; + req.uartclk = TXX9_IMCLK; + early_serial_txx9_setup(&req); + } +#endif /* CONFIG_SERIAL_TXX9 */ +} diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c index f3b60233e99..68f74368dde 100644 --- a/arch/mips/txx9/jmr3927/irq.c +++ b/arch/mips/txx9/jmr3927/irq.c @@ -46,13 +46,6 @@ #error JMR3927_IRQ_END > NR_IRQS #endif -static unsigned char irc_level[TX3927_NUM_IR] = { - 5, 5, 5, 5, 5, 5, /* INT[5:0] */ - 7, 7, /* SIO */ - 5, 5, 5, 0, 0, /* DMA, PIO, PCI */ - 6, 6, 6 /* TMR */ -}; - /* * CP0_STATUS is a thread's resource (saved/restored on context switch). * So disable_irq/enable_irq MUST handle IOC/IRC registers. @@ -103,10 +96,18 @@ static int jmr3927_irq_dispatch(int pending) return irq; } -static void __init jmr3927_irq_init(void); +static struct irq_chip jmr3927_irq_ioc = { + .name = "jmr3927_ioc", + .ack = mask_irq_ioc, + .mask = mask_irq_ioc, + .mask_ack = mask_irq_ioc, + .unmask = unmask_irq_ioc, +}; void __init jmr3927_irq_setup(void) { + int i; + txx9_irq_dispatch = jmr3927_irq_dispatch; /* Now, interrupt control disabled, */ /* all IRC interrupts are masked, */ @@ -122,30 +123,10 @@ void __init jmr3927_irq_setup(void) /* clear PCI Reset interrupts */ jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - jmr3927_irq_init(); + tx3927_irq_init(); + for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++) + set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq); /* setup IOC interrupt 1 (PCI, MODEM) */ set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq); - - /* enable all CPU interrupt bits. */ - set_c0_status(ST0_IM); /* IE bit is still 0. */ -} - -static struct irq_chip jmr3927_irq_ioc = { - .name = "jmr3927_ioc", - .ack = mask_irq_ioc, - .mask = mask_irq_ioc, - .mask_ack = mask_irq_ioc, - .unmask = unmask_irq_ioc, -}; - -static void __init jmr3927_irq_init(void) -{ - u32 i; - - txx9_irq_init(TX3927_IRC_REG); - for (i = 0; i < TXx9_MAX_IR; i++) - txx9_irq_set_pri(i, irc_level[i]); - for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++) - set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq); } diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index ae34e9a4a8a..7378a835d4e 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -34,20 +34,13 @@ #include #include #include -#ifdef CONFIG_SERIAL_TXX9 -#include -#endif -#include -#include #include +#include #include #include #include #include -/* don't enable - see errata */ -static int jmr3927_ccfg_toeon; - static void jmr3927_machine_restart(char *command) { local_irq_disable(); @@ -65,10 +58,7 @@ static void jmr3927_machine_restart(char *command) static void __init jmr3927_time_init(void) { - txx9_clockevent_init(TX3927_TMR_REG(0), - JMR3927_IRQ_IRC_TMR(0), - JMR3927_IMCLK); - txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK); + tx3927_time_init(0, 1); } #define DO_WRITE_THROUGH @@ -118,34 +108,12 @@ static void __init jmr3927_mem_setup(void) jmr3927_board_init(); argptr = prom_getcmdline(); - - if ((argptr = strstr(argptr, "toeon")) != NULL) - jmr3927_ccfg_toeon = 1; - argptr = prom_getcmdline(); if ((argptr = strstr(argptr, "ip=")) == NULL) { argptr = prom_getcmdline(); strcat(argptr, " ip=bootp"); } -#ifdef CONFIG_SERIAL_TXX9 - { - extern int early_serial_txx9_setup(struct uart_port *port); - int i; - struct uart_port req; - for(i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i); - req.mapbase = TX3927_SIO_REG(i); - req.irq = i == 0 ? - JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1; - if (i == 0) - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = JMR3927_IMCLK; - early_serial_txx9_setup(&req); - } - } + tx3927_setup_serial(1 << 1); /* ch1: noCTS */ #ifdef CONFIG_SERIAL_TXX9_CONSOLE argptr = prom_getcmdline(); if ((argptr = strstr(argptr, "console=")) == NULL) { @@ -153,11 +121,8 @@ static void __init jmr3927_mem_setup(void) strcat(argptr, " console=ttyS1,115200"); } #endif -#endif } -static void tx3927_setup(void); - static void __init jmr3927_pci_setup(void) { #ifdef CONFIG_PCI @@ -184,27 +149,7 @@ static void __init jmr3927_pci_setup(void) static void __init jmr3927_board_init(void) { - tx3927_setup(); - jmr3927_pci_setup(); - - /* SIO0 DTR on */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); - - jmr3927_led_set(0); - - printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n", - jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK, - jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK, - jmr3927_dipsw1(), jmr3927_dipsw2(), - jmr3927_dipsw3(), jmr3927_dipsw4()); -} - -static void __init tx3927_setup(void) -{ - int i; - txx9_cpu_clock = JMR3927_CORECLK; - txx9_gbus_clock = JMR3927_GBUSCLK; /* SDRAMC are configured by PROM */ /* ROMC */ @@ -213,74 +158,32 @@ static void __init tx3927_setup(void) tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698; tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218; - /* CCFG */ - /* enable Timeout BusError */ - if (jmr3927_ccfg_toeon) - tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE; - - /* clear BusErrorOnWrite flag */ - tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; - /* Disable PCI snoop */ - tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; - /* do reset on watchdog */ - tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR; - -#ifdef DO_WRITE_THROUGH - /* Enable PCI SNOOP - with write through only */ - tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP; -#endif - /* Pin selection */ tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL; tx3927_ccfgptr->pcfg |= TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL | (TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1)); - printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n", - tx3927_ccfgptr->crir, - tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); - - /* TMR */ - for (i = 0; i < TX3927_NR_TMR; i++) - txx9_tmr_init(TX3927_TMR_REG(i)); - - /* DMA */ - tx3927_dmaptr->mcr = 0; - for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) { - /* reset channel */ - tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; - tx3927_dmaptr->ch[i].ccr = 0; - } - /* enable DMA */ -#ifdef __BIG_ENDIAN - tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN; -#else - tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; -#endif + tx3927_setup(); - /* PIO */ /* PIO[15:12] connected to LEDs */ __raw_writel(0x0000f000, &tx3927_pioptr->dir); - __raw_writel(0, &tx3927_pioptr->maskcpu); - __raw_writel(0, &tx3927_pioptr->maskext); - txx9_gpio_init(TX3927_PIO_REG, 0, 16); gpio_request(11, "dipsw1"); gpio_request(10, "dipsw2"); - { - unsigned int conf; - conf = read_c0_conf(); - if (!(conf & TX39_CONF_ICE)) - printk("TX3927 I-Cache disabled.\n"); - if (!(conf & TX39_CONF_DCE)) - printk("TX3927 D-Cache disabled.\n"); - else if (!(conf & TX39_CONF_WBON)) - printk("TX3927 D-Cache WriteThrough.\n"); - else if (!(conf & TX39_CONF_CWFON)) - printk("TX3927 D-Cache WriteBack.\n"); - else - printk("TX3927 D-Cache WriteBack (CWF) .\n"); - } + jmr3927_pci_setup(); + + /* SIO0 DTR on */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); + + jmr3927_led_set(0); + + printk(KERN_INFO + "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n", + jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK, + jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK, + jmr3927_dipsw1(), jmr3927_dipsw2(), + jmr3927_dipsw3(), jmr3927_dipsw4()); } /* This trick makes rtc-ds1742 driver usable as is. */ @@ -308,11 +211,6 @@ static int __init jmr3927_rtc_init(void) return IS_ERR(dev) ? PTR_ERR(dev) : 0; } -static void __init tx3927_wdt_init(void) -{ - txx9_wdt_init(TX3927_TMR_REG(2)); -} - static void __init jmr3927_device_init(void) { __swizzle_addr_b = jmr3927_swizzle_addr_b; diff --git a/include/asm-mips/txx9/jmr3927.h b/include/asm-mips/txx9/jmr3927.h index d6eb1b6a54e..a409c446bf1 100644 --- a/include/asm-mips/txx9/jmr3927.h +++ b/include/asm-mips/txx9/jmr3927.h @@ -149,8 +149,6 @@ /* Clocks */ #define JMR3927_CORECLK 132710400 /* 132.7MHz */ -#define JMR3927_GBUSCLK (JMR3927_CORECLK / 2) /* 66.35MHz */ -#define JMR3927_IMCLK (JMR3927_CORECLK / 4) /* 33.17MHz */ /* * TX3927 Pin Configuration: diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h index 8d62b1ba2c1..0bac37f758e 100644 --- a/include/asm-mips/txx9/tx3927.h +++ b/include/asm-mips/txx9/tx3927.h @@ -11,6 +11,7 @@ #include #define TX3927_REG_BASE 0xfffe0000UL +#define TX3927_REG_SIZE 0x00010000 #define TX3927_SDRAMC_REG (TX3927_REG_BASE + 0x8000) #define TX3927_ROMC_REG (TX3927_REG_BASE + 0x9000) #define TX3927_DMA_REG (TX3927_REG_BASE + 0xb000) @@ -319,13 +320,22 @@ struct tx3927_ccfg_reg { #define tx3927_dmaptr ((struct tx3927_dma_reg *)TX3927_DMA_REG) #define tx3927_pcicptr ((struct tx3927_pcic_reg *)TX3927_PCIC_REG) #define tx3927_ccfgptr ((struct tx3927_ccfg_reg *)TX3927_CCFG_REG) -#define tx3927_tmrptr(ch) ((struct txx927_tmr_reg *)TX3927_TMR_REG(ch)) #define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch)) #define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG) +#define TX3927_REV_PCODE() (tx3927_ccfgptr->crir >> 16) +#define TX3927_ROMC_BA(ch) (tx3927_romcptr->cr[(ch)] & 0xfff00000) +#define TX3927_ROMC_SIZE(ch) \ + (0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf)) + +void tx3927_wdt_init(void); +void tx3927_setup(void); +void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr); +void tx3927_setup_serial(unsigned int cts_mask); struct pci_controller; void __init tx3927_pcic_setup(struct pci_controller *channel, unsigned long sdram_size, int extarb); void tx3927_setup_pcierr_irq(void); +void tx3927_irq_init(void); #endif /* __ASM_TXX9_TX3927_H */ -- GitLab From c49f91f51e3cca796494f69fd967a7f72df5d457 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 24 Jul 2008 00:25:20 +0900 Subject: [PATCH 0433/1024] [MIPS] TXx9: Make tx4938-specific code more independent Make some TX4938 SoC specific code independent from board specific code. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 27 +++++++++++++++++++++ arch/mips/txx9/generic/setup_tx4938.c | 16 +++++++++++++ arch/mips/txx9/rbtx4938/setup.c | 34 ++------------------------- include/asm-mips/txx9/generic.h | 2 ++ include/asm-mips/txx9/tx4938.h | 2 ++ 5 files changed, 49 insertions(+), 32 deletions(-) diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 7b5705d18de..b136c6692a5 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -220,6 +220,33 @@ void __init txx9_wdt_init(unsigned long base) platform_device_register_simple("txx9wdt", -1, &res, 1); } +/* SPI support */ +void __init txx9_spi_init(int busid, unsigned long base, int irq) +{ + struct resource res[] = { + { + .start = base, + .end = base + 0x20 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .flags = IORESOURCE_IRQ, + }, + }; + platform_device_register_simple("spi_txx9", busid, + res, ARRAY_SIZE(res)); +} + +void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr) +{ + struct platform_device *pdev = + platform_device_alloc("tc35815-mac", id); + if (!pdev || + platform_device_add_data(pdev, ethaddr, 6) || + platform_device_add(pdev)) + platform_device_put(pdev); +} + /* wrappers */ void __init plat_mem_setup(void) { diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index b0a3dc8863f..1ceace45ef6 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -262,3 +262,19 @@ void __init tx4938_setup_serial(void) } #endif /* CONFIG_SERIAL_TXX9 */ } + +void __init tx4938_spi_init(int busid) +{ + txx9_spi_init(busid, TX4938_SPI_REG & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4938_IR_SPI); +} + +void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1) +{ + u64 pcfg = __raw_readq(&tx4938_ccfgptr->pcfg); + + if (addr0 && (pcfg & TX4938_PCFG_ETH0_SEL)) + txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH0, addr0); + if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL)) + txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1); +} diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index ff5fda2151f..3324a70a6b7 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -132,19 +132,7 @@ static int __init rbtx4938_ethaddr_init(void) if (sum) printk(KERN_WARNING "seeprom: bad checksum.\n"); } - for (i = 0; i < 2; i++) { - unsigned int id = - TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0); - struct platform_device *pdev; - if (!(__raw_readq(&tx4938_ccfgptr->pcfg) & - (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL))) - continue; - pdev = platform_device_alloc("tc35815-mac", id); - if (!pdev || - platform_device_add_data(pdev, &dat[4 + 6 * i], 6) || - platform_device_add(pdev)) - platform_device_put(pdev); - } + tx4938_ethaddr_init(&dat[4], &dat[4 + 6]); #endif /* CONFIG_PCI */ return 0; } @@ -301,24 +289,6 @@ static struct gpio_chip rbtx4938_spi_gpio_chip = { .ngpio = 3, }; -/* SPI support */ - -static void __init txx9_spi_init(unsigned long base, int irq) -{ - struct resource res[] = { - { - .start = base, - .end = base + 0x20 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = irq, - .flags = IORESOURCE_IRQ, - }, - }; - platform_device_register_simple("spi_txx9", 0, - res, ARRAY_SIZE(res)); -} - static int __init rbtx4938_spi_init(void) { struct spi_board_info srtc_info = { @@ -341,7 +311,7 @@ static int __init rbtx4938_spi_init(void) gpio_direction_output(16 + SEEPROM2_CS, 1); gpio_request(16 + SEEPROM3_CS, "seeprom3"); gpio_direction_output(16 + SEEPROM3_CS, 1); - txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI); + tx4938_spi_init(0); return 0; } diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index 2b34d09e34c..c6b5cd6a272 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -45,5 +45,7 @@ extern int (*txx9_irq_dispatch)(int pending); void prom_init_cmdline(void); char *prom_getcmdline(void); void txx9_wdt_init(unsigned long base); +void txx9_spi_init(int busid, unsigned long base, int irq); +void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr); #endif /* __ASM_TXX9_GENERIC_H */ diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h index d5d7cef7ee8..26f9d4aaf13 100644 --- a/include/asm-mips/txx9/tx4938.h +++ b/include/asm-mips/txx9/tx4938.h @@ -280,6 +280,8 @@ void tx4938_wdt_init(void); void tx4938_setup(void); void tx4938_time_init(unsigned int tmrnr); void tx4938_setup_serial(void); +void tx4938_spi_init(int busid); +void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1); int tx4938_report_pciclk(void); void tx4938_report_pci1clk(void); int tx4938_pciclk66_setup(void); -- GitLab From bb72f1f729dcbd6a6a93c74479eeaa19deebfb47 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 24 Jul 2008 00:25:21 +0900 Subject: [PATCH 0434/1024] [MIPS] TXx9: Random cleanup * Random cleanups spotted by checkpatch script. * Do not initialize panic_timeout. "panic=" kernel parameter can be used. * Do not add "ip=any" or "ip=bootp". This options is not board specific. * Do not add "root=/dev/nfs". This is default on CONFIG_ROOT_NFS. * Kill unused error checking. * Fix IRQ comment to match current code. * Kill some unneeded includes * ST0_ERL is already cleared in generic code. * conswitchp is initialized generic code. * __init is not needed in prototype. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/smsc_fdc37m81x.c | 20 +-- arch/mips/txx9/jmr3927/irq.c | 4 - arch/mips/txx9/jmr3927/prom.c | 12 +- arch/mips/txx9/jmr3927/setup.c | 22 +--- arch/mips/txx9/rbtx4927/irq.c | 161 ++++++++++++------------ arch/mips/txx9/rbtx4927/setup.c | 38 ++---- arch/mips/txx9/rbtx4938/irq.c | 107 ++++++++-------- arch/mips/txx9/rbtx4938/setup.c | 39 ++---- include/asm-mips/txx9/smsc_fdc37m81x.h | 2 +- include/asm-mips/txx9/tx3927.h | 4 +- include/asm-mips/txx9/tx4927pcic.h | 4 +- 11 files changed, 170 insertions(+), 243 deletions(-) diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c index 69e487467fa..a2b2d62d88e 100644 --- a/arch/mips/txx9/generic/smsc_fdc37m81x.c +++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c @@ -15,8 +15,6 @@ #include #include -#define DEBUG - /* Common Registers */ #define SMSC_FDC37M81X_CONFIG_INDEX 0x00 #define SMSC_FDC37M81X_CONFIG_DATA 0x01 @@ -55,7 +53,7 @@ #define SMSC_FDC37M81X_CONFIG_EXIT 0xaa #define SMSC_FDC37M81X_CHIP_ID 0x4d -static unsigned long g_smsc_fdc37m81x_base = 0; +static unsigned long g_smsc_fdc37m81x_base; static inline unsigned char smsc_fdc37m81x_rd(unsigned char index) { @@ -107,7 +105,8 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port) u8 chip_id; if (g_smsc_fdc37m81x_base) - printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n", + printk(KERN_WARNING "%s: stepping on old base=0x%0*lx\n", + __func__, field, g_smsc_fdc37m81x_base); g_smsc_fdc37m81x_base = port; @@ -118,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port) if (chip_id == SMSC_FDC37M81X_CHIP_ID) smsc_fdc37m81x_config_end(); else { - printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n", + printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__, chip_id); g_smsc_fdc37m81x_base = 0; } @@ -127,22 +126,23 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port) } #ifdef DEBUG -void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg) +static void smsc_fdc37m81x_config_dump_one(const char *key, u8 dev, u8 reg) { - printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg, + printk(KERN_INFO "%s: dev=0x%02x reg=0x%02x val=0x%02x\n", + key, dev, reg, smsc_fdc37m81x_rd(reg)); } void smsc_fdc37m81x_config_dump(void) { u8 orig; - char *fname = "smsc_fdc37m81x_config_dump()"; + const char *fname = __func__; smsc_fdc37m81x_config_beg(); orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM); - printk("%s: common\n", fname); + printk(KERN_INFO "%s: common\n", fname); smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, SMSC_FDC37M81X_DNUM); smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, @@ -154,7 +154,7 @@ void smsc_fdc37m81x_config_dump(void) smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, SMSC_FDC37M81X_PMGT); - printk("%s: keyboard\n", fname); + printk(KERN_INFO "%s: keyboard\n", fname); smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD); smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, SMSC_FDC37M81X_ACTIVE); diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c index 68f74368dde..6ec626c9473 100644 --- a/arch/mips/txx9/jmr3927/irq.c +++ b/arch/mips/txx9/jmr3927/irq.c @@ -30,15 +30,11 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include -#include #include #include #include #include -#include - -#include #include #include diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c index 2cadb423fac..23df38c1490 100644 --- a/arch/mips/txx9/jmr3927/prom.c +++ b/arch/mips/txx9/jmr3927/prom.c @@ -36,6 +36,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include +#include #include #include #include @@ -56,20 +57,11 @@ prom_putchar(char c) return; } -void -puts(const char *cp) -{ - while (*cp) - prom_putchar(*cp++); - prom_putchar('\r'); - prom_putchar('\n'); -} - void __init jmr3927_prom_init(void) { /* CCFG */ if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0) - puts("Warning: TX3927 TLB off\n"); + printk(KERN_ERR "TX3927 TLB off\n"); prom_init_cmdline(); add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 7378a835d4e..cf7513d95fa 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -74,9 +74,6 @@ static void __init jmr3927_mem_setup(void) _machine_restart = jmr3927_machine_restart; - /* Reboot on panic */ - panic_timeout = 180; - /* cache setup */ { unsigned int conf; @@ -94,7 +91,8 @@ static void __init jmr3927_mem_setup(void) #endif conf = read_c0_conf(); - conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON); + conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | + TX39_CONF_WBON | TX39_CONF_CWFON); conf |= mips_ic_disable ? 0 : TX39_CONF_ICE; conf |= mips_dc_disable ? 0 : TX39_CONF_DCE; conf |= mips_config_wbon ? TX39_CONF_WBON : 0; @@ -107,19 +105,11 @@ static void __init jmr3927_mem_setup(void) /* initialize board */ jmr3927_board_init(); - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "ip=")) == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " ip=bootp"); - } - tx3927_setup_serial(1 << 1); /* ch1: noCTS */ #ifdef CONFIG_SERIAL_TXX9_CONSOLE argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "console=")) == NULL) { - argptr = prom_getcmdline(); + if (!strstr(argptr, "console=")) strcat(argptr, " console=ttyS1,115200"); - } #endif } @@ -199,16 +189,14 @@ static unsigned long jmr3927_swizzle_addr_b(unsigned long port) #endif } -static int __init jmr3927_rtc_init(void) +static void __init jmr3927_rtc_init(void) { static struct resource __initdata res = { .start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE, .end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1, .flags = IORESOURCE_MEM, }; - struct platform_device *dev; - dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; + platform_device_register_simple("rtc-ds1742", -1, &res, 1); } static void __init jmr3927_device_init(void) diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c index cd748a93032..00cd5231da3 100644 --- a/arch/mips/txx9/rbtx4927/irq.c +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -27,85 +27,86 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ /* -IRQ Device -00 RBTX4927-ISA/00 -01 RBTX4927-ISA/01 PS2/Keyboard -02 RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15) -03 RBTX4927-ISA/03 -04 RBTX4927-ISA/04 -05 RBTX4927-ISA/05 -06 RBTX4927-ISA/06 -07 RBTX4927-ISA/07 -08 RBTX4927-ISA/08 -09 RBTX4927-ISA/09 -10 RBTX4927-ISA/10 -11 RBTX4927-ISA/11 -12 RBTX4927-ISA/12 PS2/Mouse (not supported at this time) -13 RBTX4927-ISA/13 -14 RBTX4927-ISA/14 IDE -15 RBTX4927-ISA/15 - -16 TX4927-CP0/00 Software 0 -17 TX4927-CP0/01 Software 1 -18 TX4927-CP0/02 Cascade TX4927-CP0 -19 TX4927-CP0/03 Multiplexed -- do not use -20 TX4927-CP0/04 Multiplexed -- do not use -21 TX4927-CP0/05 Multiplexed -- do not use -22 TX4927-CP0/06 Multiplexed -- do not use -23 TX4927-CP0/07 CPU TIMER - -24 TX4927-PIC/00 -25 TX4927-PIC/01 -26 TX4927-PIC/02 -27 TX4927-PIC/03 Cascade RBTX4927-IOC -28 TX4927-PIC/04 -29 TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet -30 TX4927-PIC/06 -31 TX4927-PIC/07 -32 TX4927-PIC/08 TX4927 SerialIO Channel 0 -33 TX4927-PIC/09 TX4927 SerialIO Channel 1 -34 TX4927-PIC/10 -35 TX4927-PIC/11 -36 TX4927-PIC/12 -37 TX4927-PIC/13 -38 TX4927-PIC/14 -39 TX4927-PIC/15 -40 TX4927-PIC/16 TX4927 PCI PCI-C -41 TX4927-PIC/17 -42 TX4927-PIC/18 -43 TX4927-PIC/19 -44 TX4927-PIC/20 -45 TX4927-PIC/21 -46 TX4927-PIC/22 TX4927 PCI PCI-ERR -47 TX4927-PIC/23 TX4927 PCI PCI-PMA (not used) -48 TX4927-PIC/24 -49 TX4927-PIC/25 -50 TX4927-PIC/26 -51 TX4927-PIC/27 -52 TX4927-PIC/28 -53 TX4927-PIC/29 -54 TX4927-PIC/30 -55 TX4927-PIC/31 - -56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed) [RTL-8139=PJ4] -57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed) [RTL-8139=PJ5] -58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported] -59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4) [RTL-8139=PJ6] -60 RBTX4927-IOC/04 -61 RBTX4927-IOC/05 -62 RBTX4927-IOC/06 -63 RBTX4927-IOC/07 - -NOTES: -SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58 -SouthBridge/ISA/pin=0 no pci irq used by this device -SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14 -SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59 -SouthBridge/PMC/pin=0 no pci irq used by this device -SuperIO/PS2/Keyboard, using INTR via ISA IRQ1 -SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported) -JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6 -*/ + * I8259A_IRQ_BASE+00 + * I8259A_IRQ_BASE+01 PS2/Keyboard + * I8259A_IRQ_BASE+02 Cascade RBTX4927-ISA (irqs 8-15) + * I8259A_IRQ_BASE+03 + * I8259A_IRQ_BASE+04 + * I8259A_IRQ_BASE+05 + * I8259A_IRQ_BASE+06 + * I8259A_IRQ_BASE+07 + * I8259A_IRQ_BASE+08 + * I8259A_IRQ_BASE+09 + * I8259A_IRQ_BASE+10 + * I8259A_IRQ_BASE+11 + * I8259A_IRQ_BASE+12 PS2/Mouse (not supported at this time) + * I8259A_IRQ_BASE+13 + * I8259A_IRQ_BASE+14 IDE + * I8259A_IRQ_BASE+15 + * + * MIPS_CPU_IRQ_BASE+00 Software 0 + * MIPS_CPU_IRQ_BASE+01 Software 1 + * MIPS_CPU_IRQ_BASE+02 Cascade TX4927-CP0 + * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+07 CPU TIMER + * + * TXX9_IRQ_BASE+00 + * TXX9_IRQ_BASE+01 + * TXX9_IRQ_BASE+02 + * TXX9_IRQ_BASE+03 Cascade RBTX4927-IOC + * TXX9_IRQ_BASE+04 + * TXX9_IRQ_BASE+05 RBTX4927 RTL-8019AS ethernet + * TXX9_IRQ_BASE+06 + * TXX9_IRQ_BASE+07 + * TXX9_IRQ_BASE+08 TX4927 SerialIO Channel 0 + * TXX9_IRQ_BASE+09 TX4927 SerialIO Channel 1 + * TXX9_IRQ_BASE+10 + * TXX9_IRQ_BASE+11 + * TXX9_IRQ_BASE+12 + * TXX9_IRQ_BASE+13 + * TXX9_IRQ_BASE+14 + * TXX9_IRQ_BASE+15 + * TXX9_IRQ_BASE+16 TX4927 PCI PCI-C + * TXX9_IRQ_BASE+17 + * TXX9_IRQ_BASE+18 + * TXX9_IRQ_BASE+19 + * TXX9_IRQ_BASE+20 + * TXX9_IRQ_BASE+21 + * TXX9_IRQ_BASE+22 TX4927 PCI PCI-ERR + * TXX9_IRQ_BASE+23 TX4927 PCI PCI-PMA (not used) + * TXX9_IRQ_BASE+24 + * TXX9_IRQ_BASE+25 + * TXX9_IRQ_BASE+26 + * TXX9_IRQ_BASE+27 + * TXX9_IRQ_BASE+28 + * TXX9_IRQ_BASE+29 + * TXX9_IRQ_BASE+30 + * TXX9_IRQ_BASE+31 + * + * RBTX4927_IRQ_IOC+00 FPCIB0 PCI-D (SouthBridge) + * RBTX4927_IRQ_IOC+01 FPCIB0 PCI-C (SouthBridge) + * RBTX4927_IRQ_IOC+02 FPCIB0 PCI-B (SouthBridge/IDE/pin=1,INTR) + * RBTX4927_IRQ_IOC+03 FPCIB0 PCI-A (SouthBridge/USB/pin=4) + * RBTX4927_IRQ_IOC+04 + * RBTX4927_IRQ_IOC+05 + * RBTX4927_IRQ_IOC+06 + * RBTX4927_IRQ_IOC+07 + * + * NOTES: + * SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58 + * SouthBridge/ISA/pin=0 no pci irq used by this device + * SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR + * via ISA IRQ14 + * SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59 + * SouthBridge/PMC/pin=0 no pci irq used by this device + * SuperIO/PS2/Keyboard, using INTR via ISA IRQ1 + * SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported) + * JP7 is not bus master -- do NOT use -- only 4 pci bus master's + * allowed -- SouthBridge, JP4, JP5, JP6 + */ #include #include @@ -134,7 +135,7 @@ static int toshiba_rbtx4927_irq_nested(int sw_irq) level3 = readb(rbtx4927_imstat_addr) & 0x1f; if (level3) sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1; - return (sw_irq); + return sw_irq; } static void __init toshiba_rbtx4927_irq_ioc_init(void) diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index f01af382e9a..962ada57d12 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -46,7 +46,6 @@ #include #include #include -#include #include #include #include @@ -189,9 +188,6 @@ static void __init rbtx4927_mem_setup(void) u32 cp0_config; char *argptr; - /* f/w leaves this on at startup */ - clear_c0_status(ST0_ERL); - /* enable caches -- HCP5 does this, pmon does not */ cp0_config = read_c0_config(); cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); @@ -218,24 +214,9 @@ static void __init rbtx4927_mem_setup(void) tx4927_setup_serial(); #ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if (strstr(argptr, "console=") == NULL) { - strcat(argptr, " console=ttyS0,38400"); - } -#endif - -#ifdef CONFIG_ROOT_NFS - argptr = prom_getcmdline(); - if (strstr(argptr, "root=") == NULL) { - strcat(argptr, " root=/dev/nfs rw"); - } -#endif - -#ifdef CONFIG_IP_PNP - argptr = prom_getcmdline(); - if (strstr(argptr, "ip=") == NULL) { - strcat(argptr, " ip=any"); - } + argptr = prom_getcmdline(); + if (!strstr(argptr, "console=")) + strcat(argptr, " console=ttyS0,38400"); #endif } @@ -298,19 +279,17 @@ static void __init rbtx4927_time_init(void) tx4927_time_init(0); } -static int __init toshiba_rbtx4927_rtc_init(void) +static void __init toshiba_rbtx4927_rtc_init(void) { struct resource res = { .start = RBTX4927_BRAMRTC_BASE - IO_BASE, .end = RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1, .flags = IORESOURCE_MEM, }; - struct platform_device *dev = - platform_device_register_simple("rtc-ds1742", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; + platform_device_register_simple("rtc-ds1742", -1, &res, 1); } -static int __init rbtx4927_ne_init(void) +static void __init rbtx4927_ne_init(void) { struct resource res[] = { { @@ -322,10 +301,7 @@ static int __init rbtx4927_ne_init(void) .flags = IORESOURCE_IRQ, } }; - struct platform_device *dev = - platform_device_register_simple("ne", -1, - res, ARRAY_SIZE(res)); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; + platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res)); } static void __init rbtx4927_device_init(void) diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c index 3971a061657..ca2f8306ce9 100644 --- a/arch/mips/txx9/rbtx4938/irq.c +++ b/arch/mips/txx9/rbtx4938/irq.c @@ -11,59 +11,57 @@ */ /* -IRQ Device - -16 TX4938-CP0/00 Software 0 -17 TX4938-CP0/01 Software 1 -18 TX4938-CP0/02 Cascade TX4938-CP0 -19 TX4938-CP0/03 Multiplexed -- do not use -20 TX4938-CP0/04 Multiplexed -- do not use -21 TX4938-CP0/05 Multiplexed -- do not use -22 TX4938-CP0/06 Multiplexed -- do not use -23 TX4938-CP0/07 CPU TIMER - -24 TX4938-PIC/00 -25 TX4938-PIC/01 -26 TX4938-PIC/02 Cascade RBTX4938-IOC -27 TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet -28 TX4938-PIC/04 -29 TX4938-PIC/05 TX4938 ETH1 -30 TX4938-PIC/06 TX4938 ETH0 -31 TX4938-PIC/07 -32 TX4938-PIC/08 TX4938 SIO 0 -33 TX4938-PIC/09 TX4938 SIO 1 -34 TX4938-PIC/10 TX4938 DMA0 -35 TX4938-PIC/11 TX4938 DMA1 -36 TX4938-PIC/12 TX4938 DMA2 -37 TX4938-PIC/13 TX4938 DMA3 -38 TX4938-PIC/14 -39 TX4938-PIC/15 -40 TX4938-PIC/16 TX4938 PCIC -41 TX4938-PIC/17 TX4938 TMR0 -42 TX4938-PIC/18 TX4938 TMR1 -43 TX4938-PIC/19 TX4938 TMR2 -44 TX4938-PIC/20 -45 TX4938-PIC/21 -46 TX4938-PIC/22 TX4938 PCIERR -47 TX4938-PIC/23 -48 TX4938-PIC/24 -49 TX4938-PIC/25 -50 TX4938-PIC/26 -51 TX4938-PIC/27 -52 TX4938-PIC/28 -53 TX4938-PIC/29 -54 TX4938-PIC/30 -55 TX4938-PIC/31 TX4938 SPI - -56 RBTX4938-IOC/00 PCI-D -57 RBTX4938-IOC/01 PCI-C -58 RBTX4938-IOC/02 PCI-B -59 RBTX4938-IOC/03 PCI-A -60 RBTX4938-IOC/04 RTC -61 RBTX4938-IOC/05 ATA -62 RBTX4938-IOC/06 MODEM -63 RBTX4938-IOC/07 SWINT -*/ + * MIPS_CPU_IRQ_BASE+00 Software 0 + * MIPS_CPU_IRQ_BASE+01 Software 1 + * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0 + * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use + * MIPS_CPU_IRQ_BASE+07 CPU TIMER + * + * TXX9_IRQ_BASE+00 + * TXX9_IRQ_BASE+01 + * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC + * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet + * TXX9_IRQ_BASE+04 + * TXX9_IRQ_BASE+05 TX4938 ETH1 + * TXX9_IRQ_BASE+06 TX4938 ETH0 + * TXX9_IRQ_BASE+07 + * TXX9_IRQ_BASE+08 TX4938 SIO 0 + * TXX9_IRQ_BASE+09 TX4938 SIO 1 + * TXX9_IRQ_BASE+10 TX4938 DMA0 + * TXX9_IRQ_BASE+11 TX4938 DMA1 + * TXX9_IRQ_BASE+12 TX4938 DMA2 + * TXX9_IRQ_BASE+13 TX4938 DMA3 + * TXX9_IRQ_BASE+14 + * TXX9_IRQ_BASE+15 + * TXX9_IRQ_BASE+16 TX4938 PCIC + * TXX9_IRQ_BASE+17 TX4938 TMR0 + * TXX9_IRQ_BASE+18 TX4938 TMR1 + * TXX9_IRQ_BASE+19 TX4938 TMR2 + * TXX9_IRQ_BASE+20 + * TXX9_IRQ_BASE+21 + * TXX9_IRQ_BASE+22 TX4938 PCIERR + * TXX9_IRQ_BASE+23 + * TXX9_IRQ_BASE+24 + * TXX9_IRQ_BASE+25 + * TXX9_IRQ_BASE+26 + * TXX9_IRQ_BASE+27 + * TXX9_IRQ_BASE+28 + * TXX9_IRQ_BASE+29 + * TXX9_IRQ_BASE+30 + * TXX9_IRQ_BASE+31 TX4938 SPI + * + * RBTX4938_IRQ_IOC+00 PCI-D + * RBTX4938_IRQ_IOC+01 PCI-C + * RBTX4938_IRQ_IOC+02 PCI-B + * RBTX4938_IRQ_IOC+03 PCI-A + * RBTX4938_IRQ_IOC+04 RTC + * RBTX4938_IRQ_IOC+05 ATA + * RBTX4938_IRQ_IOC+06 MODEM + * RBTX4938_IRQ_IOC+07 SWINT + */ #include #include #include @@ -93,9 +91,6 @@ static int toshiba_rbtx4938_irq_nested(int sw_irq) return sw_irq; } -/**********************************************************************************/ -/* Functions for ioc */ -/**********************************************************************************/ static void __init toshiba_rbtx4938_irq_ioc_init(void) { diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 3324a70a6b7..5c05a21b33f 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -13,8 +13,6 @@ #include #include #include -#include -#include #include #include @@ -169,45 +167,29 @@ static void __init rbtx4938_mem_setup(void) tx4938_setup_serial(); #ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if (strstr(argptr, "console=") == NULL) { - strcat(argptr, " console=ttyS0,38400"); - } + argptr = prom_getcmdline(); + if (!strstr(argptr, "console=")) + strcat(argptr, " console=ttyS0,38400"); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 - printk("PIOSEL: disabling both ata and nand selection\n"); - local_irq_disable(); + printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n"); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND - printk("PIOSEL: enabling nand selection\n"); + printk(KERN_INFO "PIOSEL: enabling nand selection\n"); txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA - printk("PIOSEL: enabling ata selection\n"); + printk(KERN_INFO "PIOSEL: enabling ata selection\n"); txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); #endif -#ifdef CONFIG_IP_PNP - argptr = prom_getcmdline(); - if (strstr(argptr, "ip=") == NULL) { - strcat(argptr, " ip=any"); - } -#endif - - -#ifdef CONFIG_FB - { - conswitchp = &dummy_con; - } -#endif - rbtx4938_spi_setup(); pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */ /* fixup piosel */ @@ -228,7 +210,7 @@ static void __init rbtx4938_mem_setup(void) rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff; rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY; if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource)) - printk("request resource for fpga failed\n"); + printk(KERN_ERR "request resource for fpga failed\n"); _machine_restart = rbtx4938_machine_restart; @@ -238,7 +220,7 @@ static void __init rbtx4938_mem_setup(void) readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr)); } -static int __init rbtx4938_ne_init(void) +static void __init rbtx4938_ne_init(void) { struct resource res[] = { { @@ -250,10 +232,7 @@ static int __init rbtx4938_ne_init(void) .flags = IORESOURCE_IRQ, } }; - struct platform_device *dev = - platform_device_register_simple("ne", -1, - res, ARRAY_SIZE(res)); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; + platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res)); } static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock); diff --git a/include/asm-mips/txx9/smsc_fdc37m81x.h b/include/asm-mips/txx9/smsc_fdc37m81x.h index 9375e4fc228..02e161d0755 100644 --- a/include/asm-mips/txx9/smsc_fdc37m81x.h +++ b/include/asm-mips/txx9/smsc_fdc37m81x.h @@ -56,7 +56,7 @@ #define SMSC_FDC37M81X_CONFIG_EXIT 0xaa #define SMSC_FDC37M81X_CHIP_ID 0x4d -unsigned long __init smsc_fdc37m81x_init(unsigned long port); +unsigned long smsc_fdc37m81x_init(unsigned long port); void smsc_fdc37m81x_config_beg(void); diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h index 0bac37f758e..f0439a73b3a 100644 --- a/include/asm-mips/txx9/tx3927.h +++ b/include/asm-mips/txx9/tx3927.h @@ -333,8 +333,8 @@ void tx3927_setup(void); void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr); void tx3927_setup_serial(unsigned int cts_mask); struct pci_controller; -void __init tx3927_pcic_setup(struct pci_controller *channel, - unsigned long sdram_size, int extarb); +void tx3927_pcic_setup(struct pci_controller *channel, + unsigned long sdram_size, int extarb); void tx3927_setup_pcierr_irq(void); void tx3927_irq_init(void); diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h index 223841c5613..c470b8a5fe5 100644 --- a/include/asm-mips/txx9/tx4927pcic.h +++ b/include/asm-mips/txx9/tx4927pcic.h @@ -193,8 +193,8 @@ struct tx4927_pcic_reg { struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr( struct pci_controller *channel); -void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, - struct pci_controller *channel, int extarb); +void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, + struct pci_controller *channel, int extarb); void tx4927_report_pcic_status(void); char *tx4927_pcibios_setup(char *str); void tx4927_dump_pcic_settings(void); -- GitLab From 7779a5e07d33fe316fe468e7afe7975fb686a831 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 25 Jul 2008 23:08:06 +0900 Subject: [PATCH 0435/1024] [MIPS] TXx9: Unify serial_txx9 setup * Unify calling of early_serial_txx9_setup. * Use dedicated serial clock on RBTX4938. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 24 ++++++++++++++++++++++++ arch/mips/txx9/generic/setup_tx3927.c | 25 +++++++------------------ arch/mips/txx9/generic/setup_tx4927.c | 23 ++++++----------------- arch/mips/txx9/generic/setup_tx4938.c | 18 ++++-------------- arch/mips/txx9/jmr3927/setup.c | 2 +- arch/mips/txx9/rbtx4927/setup.c | 2 +- arch/mips/txx9/rbtx4938/setup.c | 2 +- include/asm-mips/txx9/generic.h | 2 ++ include/asm-mips/txx9/tx3927.h | 2 +- include/asm-mips/txx9/tx4927.h | 2 +- include/asm-mips/txx9/tx4938.h | 2 +- 11 files changed, 49 insertions(+), 55 deletions(-) diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index b136c6692a5..94ce1a5c38a 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -247,6 +248,29 @@ void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr) platform_device_put(pdev); } +void __init txx9_sio_init(unsigned long baseaddr, int irq, + unsigned int line, unsigned int sclk, int nocts) +{ +#ifdef CONFIG_SERIAL_TXX9 + struct uart_port req; + + memset(&req, 0, sizeof(req)); + req.line = line; + req.iotype = UPIO_MEM; + req.membase = ioremap(baseaddr, 0x24); + req.mapbase = baseaddr; + req.irq = irq; + if (!nocts) + req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; + if (sclk) { + req.flags |= UPF_MAGIC_MULTIPLIER /*USE_SCLK*/; + req.uartclk = sclk; + } else + req.uartclk = TXX9_IMCLK; + early_serial_txx9_setup(&req); +#endif /* CONFIG_SERIAL_TXX9 */ +} + /* wrappers */ void __init plat_mem_setup(void) { diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c index 0d09a0ff71e..7bd963d37fc 100644 --- a/arch/mips/txx9/generic/setup_tx3927.c +++ b/arch/mips/txx9/generic/setup_tx3927.c @@ -13,8 +13,8 @@ #include #include #include -#include #include +#include #include #include #include @@ -119,23 +119,12 @@ void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr) txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK); } -void __init tx3927_setup_serial(unsigned int cts_mask) +void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask) { -#ifdef CONFIG_SERIAL_TXX9 int i; - struct uart_port req; - - for (i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i); - req.mapbase = TX3927_SIO_REG(i); - req.irq = TXX9_IRQ_BASE + TX3927_IR_SIO(i); - if (!((1 << i) & cts_mask)) - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = TXX9_IMCLK; - early_serial_txx9_setup(&req); - } -#endif /* CONFIG_SERIAL_TXX9 */ + + for (i = 0; i < 2; i++) + txx9_sio_init(TX3927_SIO_REG(i), + TXX9_IRQ_BASE + TX3927_IR_SIO(i), + i, sclk, (1 << i) & cts_mask); } diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index b42c85573d0..f80d4b7a694 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -178,22 +177,12 @@ void __init tx4927_time_init(unsigned int tmrnr) TXX9_IMCLK); } -void __init tx4927_setup_serial(void) +void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask) { -#ifdef CONFIG_SERIAL_TXX9 int i; - struct uart_port req; - - for (i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (unsigned char __iomem *)TX4927_SIO_REG(i); - req.mapbase = TX4927_SIO_REG(i) & 0xfffffffffULL; - req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i); - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = TXX9_IMCLK; - early_serial_txx9_setup(&req); - } -#endif /* CONFIG_SERIAL_TXX9 */ + + for (i = 0; i < 2; i++) + txx9_sio_init(TX4927_SIO_REG(i) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4927_IR_SIO(i), + i, sclk, (1 << i) & cts_mask); } diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index 1ceace45ef6..f3040b9ba05 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -238,11 +237,9 @@ void __init tx4938_time_init(unsigned int tmrnr) TXX9_IMCLK); } -void __init tx4938_setup_serial(void) +void __init tx4938_sio_init(unsigned int sclk, unsigned int cts_mask) { -#ifdef CONFIG_SERIAL_TXX9 int i; - struct uart_port req; unsigned int ch_mask = 0; if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_ETH0_SEL) @@ -250,17 +247,10 @@ void __init tx4938_setup_serial(void) for (i = 0; i < 2; i++) { if ((1 << i) & ch_mask) continue; - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (unsigned char __iomem *)TX4938_SIO_REG(i); - req.mapbase = TX4938_SIO_REG(i) & 0xfffffffffULL; - req.irq = TXX9_IRQ_BASE + TX4938_IR_SIO(i); - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = TXX9_IMCLK; - early_serial_txx9_setup(&req); + txx9_sio_init(TX4938_SIO_REG(i) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4938_IR_SIO(i), + i, sclk, (1 << i) & cts_mask); } -#endif /* CONFIG_SERIAL_TXX9 */ } void __init tx4938_spi_init(int busid) diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index cf7513d95fa..87db41be8a5 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -105,7 +105,7 @@ static void __init jmr3927_mem_setup(void) /* initialize board */ jmr3927_board_init(); - tx3927_setup_serial(1 << 1); /* ch1: noCTS */ + tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */ #ifdef CONFIG_SERIAL_TXX9_CONSOLE argptr = prom_getcmdline(); if (!strstr(argptr, "console=")) diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 962ada57d12..0d39bafea79 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -212,7 +212,7 @@ static void __init rbtx4927_mem_setup(void) set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET); #endif - tx4927_setup_serial(); + tx4927_sio_init(0, 0); #ifdef CONFIG_SERIAL_TXX9_CONSOLE argptr = prom_getcmdline(); if (!strstr(argptr, "console=")) diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 5c05a21b33f..9ab48dec0fe 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -165,7 +165,7 @@ static void __init rbtx4938_mem_setup(void) set_io_port_base(RBTX4938_ETHER_BASE); #endif - tx4938_setup_serial(); + tx4938_sio_init(7372800, 0); #ifdef CONFIG_SERIAL_TXX9_CONSOLE argptr = prom_getcmdline(); if (!strstr(argptr, "console=")) diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index c6b5cd6a272..a295aaa846f 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -47,5 +47,7 @@ char *prom_getcmdline(void); void txx9_wdt_init(unsigned long base); void txx9_spi_init(int busid, unsigned long base, int irq); void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr); +void txx9_sio_init(unsigned long baseaddr, int irq, + unsigned int line, unsigned int sclk, int nocts); #endif /* __ASM_TXX9_GENERIC_H */ diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h index f0439a73b3a..14e06368962 100644 --- a/include/asm-mips/txx9/tx3927.h +++ b/include/asm-mips/txx9/tx3927.h @@ -331,7 +331,7 @@ struct tx3927_ccfg_reg { void tx3927_wdt_init(void); void tx3927_setup(void); void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr); -void tx3927_setup_serial(unsigned int cts_mask); +void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask); struct pci_controller; void tx3927_pcic_setup(struct pci_controller *channel, unsigned long sdram_size, int extarb); diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h index 3d9fd7dcb33..195f6515db9 100644 --- a/include/asm-mips/txx9/tx4927.h +++ b/include/asm-mips/txx9/tx4927.h @@ -246,7 +246,7 @@ unsigned int tx4927_get_mem_size(void); void tx4927_wdt_init(void); void tx4927_setup(void); void tx4927_time_init(unsigned int tmrnr); -void tx4927_setup_serial(void); +void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask); int tx4927_report_pciclk(void); int tx4927_pciclk66_setup(void); void tx4927_setup_pcierr_irq(void); diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h index 26f9d4aaf13..8175d4ccbc3 100644 --- a/include/asm-mips/txx9/tx4938.h +++ b/include/asm-mips/txx9/tx4938.h @@ -279,7 +279,7 @@ struct tx4938_ccfg_reg { void tx4938_wdt_init(void); void tx4938_setup(void); void tx4938_time_init(unsigned int tmrnr); -void tx4938_setup_serial(void); +void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask); void tx4938_spi_init(int busid); void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1); int tx4938_report_pciclk(void); -- GitLab From e352953ce00bb870124e9054dbbbda2262f9269c Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 29 Jul 2008 22:10:08 +0900 Subject: [PATCH 0436/1024] [MIPS] TXx9: Support early_printk Kill jmr3927-specific prom_putchar and add txx9-generic prom_putchar to support early_printk. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/Kconfig | 3 +++ arch/mips/txx9/generic/setup.c | 31 +++++++++++++++++++++++++++++++ arch/mips/txx9/jmr3927/prom.c | 17 +---------------- arch/mips/txx9/rbtx4927/prom.c | 1 + arch/mips/txx9/rbtx4938/prom.c | 1 + include/asm-mips/txx9/generic.h | 9 +++++++++ 6 files changed, 46 insertions(+), 16 deletions(-) diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 6de4c5aa92b..9b14db2ce20 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -30,6 +30,7 @@ config SOC_TX3927 select IRQ_TXX9 select SWAP_IO_SPACE select SYS_HAS_CPU_TX39XX + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN @@ -49,6 +50,7 @@ config SOC_TX4927 select PCI_TX4927 select SWAP_IO_SPACE select SYS_HAS_CPU_TX49XX + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN @@ -70,6 +72,7 @@ config SOC_TX4938 select PCI_TX4927 select SWAP_IO_SPACE select SYS_HAS_CPU_TX49XX + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 94ce1a5c38a..1bc57d0f4c5 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -271,6 +271,37 @@ void __init txx9_sio_init(unsigned long baseaddr, int irq, #endif /* CONFIG_SERIAL_TXX9 */ } +#ifdef CONFIG_EARLY_PRINTK +static void __init null_prom_putchar(char c) +{ +} +void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar; + +void __init prom_putchar(char c) +{ + txx9_prom_putchar(c); +} + +static void __iomem *early_txx9_sio_port; + +static void __init early_txx9_sio_putchar(char c) +{ +#define TXX9_SICISR 0x0c +#define TXX9_SITFIFO 0x1c +#define TXX9_SICISR_TXALS 0x00000002 + while (!(__raw_readl(early_txx9_sio_port + TXX9_SICISR) & + TXX9_SICISR_TXALS)) + ; + __raw_writel(c, early_txx9_sio_port + TXX9_SITFIFO); +} + +void __init txx9_sio_putchar_init(unsigned long baseaddr) +{ + early_txx9_sio_port = ioremap(baseaddr, 0x24); + txx9_prom_putchar = early_txx9_sio_putchar; +} +#endif /* CONFIG_EARLY_PRINTK */ + /* wrappers */ void __init plat_mem_setup(void) { diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c index 23df38c1490..70c4c8ec3e8 100644 --- a/arch/mips/txx9/jmr3927/prom.c +++ b/arch/mips/txx9/jmr3927/prom.c @@ -41,22 +41,6 @@ #include #include -#define TIMEOUT 0xffffff - -void -prom_putchar(char c) -{ - int i = 0; - - do { - i++; - if (i>TIMEOUT) - break; - } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS)); - tx3927_sioptr(1)->tfifo = c; - return; -} - void __init jmr3927_prom_init(void) { /* CCFG */ @@ -65,4 +49,5 @@ void __init jmr3927_prom_init(void) prom_init_cmdline(); add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); + txx9_sio_putchar_init(TX3927_SIO_REG(1)); } diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c index 5c0de54ebdd..1dc0a5b1956 100644 --- a/arch/mips/txx9/rbtx4927/prom.c +++ b/arch/mips/txx9/rbtx4927/prom.c @@ -38,4 +38,5 @@ void __init rbtx4927_prom_init(void) { prom_init_cmdline(); add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM); + txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL); } diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c index ee189519ce5..d73123cd2ab 100644 --- a/arch/mips/txx9/rbtx4938/prom.c +++ b/arch/mips/txx9/rbtx4938/prom.c @@ -22,4 +22,5 @@ void __init rbtx4938_prom_init(void) prom_init_cmdline(); #endif add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM); + txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL); } diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index a295aaa846f..5b1ccf901c6 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -49,5 +49,14 @@ void txx9_spi_init(int busid, unsigned long base, int irq); void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr); void txx9_sio_init(unsigned long baseaddr, int irq, unsigned int line, unsigned int sclk, int nocts); +void prom_putchar(char c); +#ifdef CONFIG_EARLY_PRINTK +extern void (*txx9_prom_putchar)(char c); +void txx9_sio_putchar_init(unsigned long baseaddr); +#else +static inline void txx9_sio_putchar_init(unsigned long baseaddr) +{ +} +#endif #endif /* __ASM_TXX9_GENERIC_H */ -- GitLab From 872bfdd9e61d7dacf011046b02442215a2757026 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 29 Jul 2008 22:10:47 +0900 Subject: [PATCH 0437/1024] [MIPS] TXx9: Kill unused txx927.h include/asm-mips/txx9/txx927.h is no longer used. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- include/asm-mips/txx9/tx3927.h | 2 - include/asm-mips/txx9/txx927.h | 121 --------------------------------- 2 files changed, 123 deletions(-) delete mode 100644 include/asm-mips/txx9/txx927.h diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h index 14e06368962..587deb9592d 100644 --- a/include/asm-mips/txx9/tx3927.h +++ b/include/asm-mips/txx9/tx3927.h @@ -8,8 +8,6 @@ #ifndef __ASM_TXX9_TX3927_H #define __ASM_TXX9_TX3927_H -#include - #define TX3927_REG_BASE 0xfffe0000UL #define TX3927_REG_SIZE 0x00010000 #define TX3927_SDRAMC_REG (TX3927_REG_BASE + 0x8000) diff --git a/include/asm-mips/txx9/txx927.h b/include/asm-mips/txx9/txx927.h deleted file mode 100644 index 97dd7ad1a89..00000000000 --- a/include/asm-mips/txx9/txx927.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Common definitions for TX3927/TX4927 - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Toshiba Corporation - */ -#ifndef __ASM_TXX9_TXX927_H -#define __ASM_TXX9_TXX927_H - -struct txx927_sio_reg { - volatile unsigned long lcr; - volatile unsigned long dicr; - volatile unsigned long disr; - volatile unsigned long cisr; - volatile unsigned long fcr; - volatile unsigned long flcr; - volatile unsigned long bgr; - volatile unsigned long tfifo; - volatile unsigned long rfifo; -}; - -/* - * SIO - */ -/* SILCR : Line Control */ -#define TXx927_SILCR_SCS_MASK 0x00000060 -#define TXx927_SILCR_SCS_IMCLK 0x00000000 -#define TXx927_SILCR_SCS_IMCLK_BG 0x00000020 -#define TXx927_SILCR_SCS_SCLK 0x00000040 -#define TXx927_SILCR_SCS_SCLK_BG 0x00000060 -#define TXx927_SILCR_UEPS 0x00000010 -#define TXx927_SILCR_UPEN 0x00000008 -#define TXx927_SILCR_USBL_MASK 0x00000004 -#define TXx927_SILCR_USBL_1BIT 0x00000004 -#define TXx927_SILCR_USBL_2BIT 0x00000000 -#define TXx927_SILCR_UMODE_MASK 0x00000003 -#define TXx927_SILCR_UMODE_8BIT 0x00000000 -#define TXx927_SILCR_UMODE_7BIT 0x00000001 - -/* SIDICR : DMA/Int. Control */ -#define TXx927_SIDICR_TDE 0x00008000 -#define TXx927_SIDICR_RDE 0x00004000 -#define TXx927_SIDICR_TIE 0x00002000 -#define TXx927_SIDICR_RIE 0x00001000 -#define TXx927_SIDICR_SPIE 0x00000800 -#define TXx927_SIDICR_CTSAC 0x00000600 -#define TXx927_SIDICR_STIE_MASK 0x0000003f -#define TXx927_SIDICR_STIE_OERS 0x00000020 -#define TXx927_SIDICR_STIE_CTSS 0x00000010 -#define TXx927_SIDICR_STIE_RBRKD 0x00000008 -#define TXx927_SIDICR_STIE_TRDY 0x00000004 -#define TXx927_SIDICR_STIE_TXALS 0x00000002 -#define TXx927_SIDICR_STIE_UBRKD 0x00000001 - -/* SIDISR : DMA/Int. Status */ -#define TXx927_SIDISR_UBRK 0x00008000 -#define TXx927_SIDISR_UVALID 0x00004000 -#define TXx927_SIDISR_UFER 0x00002000 -#define TXx927_SIDISR_UPER 0x00001000 -#define TXx927_SIDISR_UOER 0x00000800 -#define TXx927_SIDISR_ERI 0x00000400 -#define TXx927_SIDISR_TOUT 0x00000200 -#define TXx927_SIDISR_TDIS 0x00000100 -#define TXx927_SIDISR_RDIS 0x00000080 -#define TXx927_SIDISR_STIS 0x00000040 -#define TXx927_SIDISR_RFDN_MASK 0x0000001f - -/* SICISR : Change Int. Status */ -#define TXx927_SICISR_OERS 0x00000020 -#define TXx927_SICISR_CTSS 0x00000010 -#define TXx927_SICISR_RBRKD 0x00000008 -#define TXx927_SICISR_TRDY 0x00000004 -#define TXx927_SICISR_TXALS 0x00000002 -#define TXx927_SICISR_UBRKD 0x00000001 - -/* SIFCR : FIFO Control */ -#define TXx927_SIFCR_SWRST 0x00008000 -#define TXx927_SIFCR_RDIL_MASK 0x00000180 -#define TXx927_SIFCR_RDIL_1 0x00000000 -#define TXx927_SIFCR_RDIL_4 0x00000080 -#define TXx927_SIFCR_RDIL_8 0x00000100 -#define TXx927_SIFCR_RDIL_12 0x00000180 -#define TXx927_SIFCR_RDIL_MAX 0x00000180 -#define TXx927_SIFCR_TDIL_MASK 0x00000018 -#define TXx927_SIFCR_TDIL_MASK 0x00000018 -#define TXx927_SIFCR_TDIL_1 0x00000000 -#define TXx927_SIFCR_TDIL_4 0x00000001 -#define TXx927_SIFCR_TDIL_8 0x00000010 -#define TXx927_SIFCR_TDIL_MAX 0x00000010 -#define TXx927_SIFCR_TFRST 0x00000004 -#define TXx927_SIFCR_RFRST 0x00000002 -#define TXx927_SIFCR_FRSTE 0x00000001 -#define TXx927_SIO_TX_FIFO 8 -#define TXx927_SIO_RX_FIFO 16 - -/* SIFLCR : Flow Control */ -#define TXx927_SIFLCR_RCS 0x00001000 -#define TXx927_SIFLCR_TES 0x00000800 -#define TXx927_SIFLCR_RTSSC 0x00000200 -#define TXx927_SIFLCR_RSDE 0x00000100 -#define TXx927_SIFLCR_TSDE 0x00000080 -#define TXx927_SIFLCR_RTSTL_MASK 0x0000001e -#define TXx927_SIFLCR_RTSTL_MAX 0x0000001e -#define TXx927_SIFLCR_TBRK 0x00000001 - -/* SIBGR : Baudrate Control */ -#define TXx927_SIBGR_BCLK_MASK 0x00000300 -#define TXx927_SIBGR_BCLK_T0 0x00000000 -#define TXx927_SIBGR_BCLK_T2 0x00000100 -#define TXx927_SIBGR_BCLK_T4 0x00000200 -#define TXx927_SIBGR_BCLK_T6 0x00000300 -#define TXx927_SIBGR_BRD_MASK 0x000000ff - -/* - * PIO - */ - -#endif /* __ASM_TXX9_TXX927_H */ -- GitLab From 8f8da9adebdf04bfb3b812a7de8706fbf179fd2c Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 29 Jul 2008 22:11:33 +0900 Subject: [PATCH 0438/1024] [MIPS] TXx9: Kconfig cleanup Unify some entries in txx9/Kconfig. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/Kconfig | 60 ++++++++++++++++++------------------------ 1 file changed, 26 insertions(+), 34 deletions(-) diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 9b14db2ce20..d1dd1195036 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -1,3 +1,27 @@ +config MACH_TX39XX + bool + select MACH_TXX9 + select SYS_HAS_CPU_TX39XX + +config MACH_TX49XX + bool + select MACH_TXX9 + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU + select SYS_HAS_CPU_TX49XX + select SYS_SUPPORTS_64BIT_KERNEL + +config MACH_TXX9 + bool + select DMA_NONCOHERENT + select SWAP_IO_SPACE + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_BIG_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ + config TOSHIBA_JMR3927 bool "Toshiba JMR-TX3927 board" depends on MACH_TX39XX @@ -24,71 +48,39 @@ config TOSHIBA_RBTX4938 config SOC_TX3927 bool select CEVT_TXX9 - select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI select IRQ_TXX9 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX39XX - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ select GPIO_TXX9 config SOC_TX4927 bool - select CEVT_R4K - select CSRC_R4K select CEVT_TXX9 - select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI - select IRQ_CPU select IRQ_TXX9 select PCI_TX4927 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX49XX - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_KGDB - select GENERIC_HARDIRQS_NO__DO_IRQ select GPIO_TXX9 config SOC_TX4938 bool - select CEVT_R4K - select CSRC_R4K select CEVT_TXX9 - select DMA_NONCOHERENT select HAS_TXX9_SERIAL select HW_HAS_PCI - select IRQ_CPU select IRQ_TXX9 select PCI_TX4927 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX49XX - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_KGDB - select GENERIC_HARDIRQS_NO__DO_IRQ select GPIO_TXX9 config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" - depends on PCI && (MACH_TX39XX || MACH_TX49XX) + depends on PCI && MACH_TXX9 select I8259 config PICMG_PCI_BACKPLANE_DEFAULT bool "Support for PICMG PCI Backplane" - depends on PCI && (MACH_TX39XX || MACH_TX49XX) + depends on PCI && MACH_TXX9 default y if !TOSHIBA_FPCIB0 if TOSHIBA_RBTX4938 -- GitLab From 8d60a903d986ffa26c41f0092320a3b9da20bfaf Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Tue, 29 Jul 2008 15:58:52 -0500 Subject: [PATCH 0439/1024] [MIPS] kgdb: Remove existing implementation This patch explicitly removes the kgdb implementation, for mips which is intended to be followed by a patch that adds a kgdb implementation for MIPS that makes use of the kgdb core in the kernel. Signed-off-by: Jason Wessel Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 6 - arch/mips/Kconfig.debug | 22 - arch/mips/au1000/Kconfig | 1 - arch/mips/au1000/common/Makefile | 1 - arch/mips/au1000/common/dbg_io.c | 109 -- arch/mips/basler/excite/Makefile | 1 - arch/mips/basler/excite/excite_dbg_io.c | 121 -- arch/mips/basler/excite/excite_irq.c | 7 - arch/mips/basler/excite/excite_setup.c | 4 +- arch/mips/configs/db1000_defconfig | 1 - arch/mips/configs/db1100_defconfig | 1 - arch/mips/configs/db1200_defconfig | 1 - arch/mips/configs/db1500_defconfig | 1 - arch/mips/configs/db1550_defconfig | 1 - arch/mips/configs/excite_defconfig | 1 - arch/mips/configs/ip27_defconfig | 1 - arch/mips/configs/msp71xx_defconfig | 2 - arch/mips/configs/mtx1_defconfig | 1 - arch/mips/configs/pb1100_defconfig | 1 - arch/mips/configs/pb1500_defconfig | 1 - arch/mips/configs/pb1550_defconfig | 1 - arch/mips/configs/pnx8550-jbs_defconfig | 4 +- arch/mips/configs/pnx8550-stb810_defconfig | 4 +- arch/mips/configs/rbtx49xx_defconfig | 1 - arch/mips/configs/sb1250-swarm_defconfig | 1 - arch/mips/configs/yosemite_defconfig | 2 - arch/mips/emma2rh/markeins/platform.c | 1 - arch/mips/emma2rh/markeins/setup.c | 1 - arch/mips/kernel/Makefile | 1 - arch/mips/kernel/gdb-low.S | 394 ------- arch/mips/kernel/gdb-stub.c | 1155 -------------------- arch/mips/kernel/irq.c | 21 - arch/mips/mti-malta/Makefile | 1 - arch/mips/mti-malta/malta-init.c | 54 - arch/mips/mti-malta/malta-kgdb.c | 133 --- arch/mips/mti-malta/malta-setup.c | 4 - arch/mips/nxp/pnx8550/common/Makefile | 1 - arch/mips/nxp/pnx8550/common/gdb_hook.c | 109 -- arch/mips/nxp/pnx8550/common/int.c | 1 - arch/mips/nxp/pnx8550/common/proc.c | 1 - arch/mips/nxp/pnx8550/common/setup.c | 12 - arch/mips/pmc-sierra/msp71xx/msp_serial.c | 73 -- arch/mips/pmc-sierra/yosemite/Makefile | 1 - arch/mips/pmc-sierra/yosemite/dbg_io.c | 180 --- arch/mips/pmc-sierra/yosemite/irq.c | 9 - arch/mips/sgi-ip22/ip22-setup.c | 25 - arch/mips/sgi-ip27/Makefile | 1 - arch/mips/sgi-ip27/ip27-dbgio.c | 60 - arch/mips/sibyte/bcm1480/irq.c | 80 -- arch/mips/sibyte/cfe/setup.c | 14 - arch/mips/sibyte/sb1250/irq.c | 60 - arch/mips/sibyte/swarm/Makefile | 1 - arch/mips/sibyte/swarm/dbg_io.c | 76 -- arch/mips/txx9/Kconfig | 2 - arch/mips/txx9/generic/Makefile | 1 - arch/mips/txx9/generic/dbgio.c | 48 - arch/mips/txx9/jmr3927/Makefile | 1 - arch/mips/txx9/jmr3927/kgdb_io.c | 105 -- include/asm-mips/gdb-stub.h | 215 ---- 59 files changed, 4 insertions(+), 3134 deletions(-) delete mode 100644 arch/mips/au1000/common/dbg_io.c delete mode 100644 arch/mips/basler/excite/excite_dbg_io.c delete mode 100644 arch/mips/kernel/gdb-low.S delete mode 100644 arch/mips/kernel/gdb-stub.c delete mode 100644 arch/mips/mti-malta/malta-kgdb.c delete mode 100644 arch/mips/nxp/pnx8550/common/gdb_hook.c delete mode 100644 arch/mips/pmc-sierra/yosemite/dbg_io.c delete mode 100644 arch/mips/sgi-ip27/ip27-dbgio.c delete mode 100644 arch/mips/sibyte/swarm/dbg_io.c delete mode 100644 arch/mips/txx9/generic/dbgio.c delete mode 100644 arch/mips/txx9/jmr3927/kgdb_io.c delete mode 100644 include/asm-mips/gdb-stub.h diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index b4c4eaa5dd2..34b13f1d8a0 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -34,7 +34,6 @@ config BASLER_EXCITE select SYS_HAS_CPU_RM9000 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB help The eXcite is a smart camera platform manufactured by Basler Vision Technologies AG. @@ -280,7 +279,6 @@ config PMC_MSP select SYS_HAS_CPU_MIPS32_R2 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB select IRQ_CPU select SERIAL_8250 select SERIAL_8250_CONSOLE @@ -306,7 +304,6 @@ config PMC_YOSEMITE select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_SMP help Yosemite is an evaluation board for the RM9000x2 processor @@ -359,7 +356,6 @@ config SGI_IP27 select SYS_HAS_CPU_R10000 select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_SMP select GENERIC_HARDIRQS_NO__DO_IRQ @@ -475,7 +471,6 @@ config SIBYTE_SWARM select SYS_HAS_CPU_SB1 select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_LITTLE_ENDIAN select ZONE_DMA32 if 64BIT @@ -868,7 +863,6 @@ config SOC_PNX8550 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select GENERIC_HARDIRQS_NO__DO_IRQ - select SYS_SUPPORTS_KGDB select GENERIC_GPIO config SWAP_IO_SPACE diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index f18cf92650e..765c8e287d2 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -34,28 +34,6 @@ config SMTC_IDLE_HOOK_DEBUG arch/mips/kernel/smtc.c. This debugging option result in significant overhead so should be disabled in production kernels. -config KGDB - bool "Remote GDB kernel debugging" - depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB - select DEBUG_INFO - help - If you say Y here, it will be possible to remotely debug the MIPS - kernel using gdb. This enlarges your kernel image disk size by - several megabytes and requires a machine with more than 16 MB, - better 32 MB RAM to avoid excessive linking time. This is only - useful for kernel hackers. If unsure, say N. - -config SYS_SUPPORTS_KGDB - bool - -config GDB_CONSOLE - bool "Console output to GDB" - depends on KGDB - help - If you are using GDB for remote debugging over a serial port and - would like kernel messages to be formatted into GDB $O packets so - that GDB prints them as program output, say 'Y'. - config SB1XXX_CORELIS bool "Corelis Debugger" depends on SIBYTE_SB1xxx_SOC diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig index 1fe97cccead..e4a057d80ab 100644 --- a/arch/mips/au1000/Kconfig +++ b/arch/mips/au1000/Kconfig @@ -134,4 +134,3 @@ config SOC_AU1X00 select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION - select SYS_SUPPORTS_KGDB diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile index dd0e19dacfc..df48fd65bbf 100644 --- a/arch/mips/au1000/common/Makefile +++ b/arch/mips/au1000/common/Makefile @@ -9,7 +9,6 @@ obj-y += prom.o irq.o puts.o time.o reset.o \ au1xxx_irqmap.o clocks.o platform.o power.o setup.o \ sleeper.o cputable.o dma.o dbdma.o gpio.o -obj-$(CONFIG_KGDB) += dbg_io.o obj-$(CONFIG_PCI) += pci.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c deleted file mode 100644 index af5be7df2f2..00000000000 --- a/arch/mips/au1000/common/dbg_io.c +++ /dev/null @@ -1,109 +0,0 @@ -#include - -#include - -#ifdef CONFIG_KGDB - -/* - * FIXME the user should be able to select the - * uart to be used for debugging. - */ -#define DEBUG_BASE UART_DEBUG_BASE - -#define UART16550_BAUD_2400 2400 -#define UART16550_BAUD_4800 4800 -#define UART16550_BAUD_9600 9600 -#define UART16550_BAUD_19200 19200 -#define UART16550_BAUD_38400 38400 -#define UART16550_BAUD_57600 57600 -#define UART16550_BAUD_115200 115200 - -#define UART16550_PARITY_NONE 0 -#define UART16550_PARITY_ODD 0x08 -#define UART16550_PARITY_EVEN 0x18 -#define UART16550_PARITY_MARK 0x28 -#define UART16550_PARITY_SPACE 0x38 - -#define UART16550_DATA_5BIT 0x0 -#define UART16550_DATA_6BIT 0x1 -#define UART16550_DATA_7BIT 0x2 -#define UART16550_DATA_8BIT 0x3 - -#define UART16550_STOP_1BIT 0x0 -#define UART16550_STOP_2BIT 0x4 - - -#define UART_RX 0 /* Receive buffer */ -#define UART_TX 4 /* Transmit buffer */ -#define UART_IER 8 /* Interrupt Enable Register */ -#define UART_IIR 0xC /* Interrupt ID Register */ -#define UART_FCR 0x10 /* FIFO Control Register */ -#define UART_LCR 0x14 /* Line Control Register */ -#define UART_MCR 0x18 /* Modem Control Register */ -#define UART_LSR 0x1C /* Line Status Register */ -#define UART_MSR 0x20 /* Modem Status Register */ -#define UART_CLK 0x28 /* Baud Rat4e Clock Divider */ -#define UART_MOD_CNTRL 0x100 /* Module Control */ - -/* memory-mapped read/write of the port */ -#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff) -#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y)) - -extern unsigned long calc_clock(void); - -void debugInit(u32 baud, u8 data, u8 parity, u8 stop) -{ - if (UART16550_READ(UART_MOD_CNTRL) != 0x3) - UART16550_WRITE(UART_MOD_CNTRL, 3); - calc_clock(); - - /* disable interrupts */ - UART16550_WRITE(UART_IER, 0); - - /* set up baud rate */ - { - u32 divisor; - - /* set divisor */ - divisor = get_au1x00_uart_baud_base() / baud; - UART16550_WRITE(UART_CLK, divisor & 0xffff); - } - - /* set data format */ - UART16550_WRITE(UART_LCR, (data | parity | stop)); -} - -static int remoteDebugInitialized; - -u8 getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_115200, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, - UART16550_STOP_1BIT); - } - - while ((UART16550_READ(UART_LSR) & 0x1) == 0); - return UART16550_READ(UART_RX); -} - - -int putDebugChar(u8 byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(UART16550_BAUD_115200, - UART16550_DATA_8BIT, - UART16550_PARITY_NONE, - UART16550_STOP_1BIT); - } - - while ((UART16550_READ(UART_LSR) & 0x40) == 0); - UART16550_WRITE(UART_TX, byte); - - return 1; -} - -#endif diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile index 519142c2e4e..cff29cf46d0 100644 --- a/arch/mips/basler/excite/Makefile +++ b/arch/mips/basler/excite/Makefile @@ -5,5 +5,4 @@ obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \ excite_device.o excite_procfs.o -obj-$(CONFIG_KGDB) += excite_dbg_io.o obj-m += excite_iodev.o diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c deleted file mode 100644 index d289e3a868c..00000000000 --- a/arch/mips/basler/excite/excite_dbg_io.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Copyright (C) 2004 by Basler Vision Technologies AG - * Author: Thomas Koeller - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include - -#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1 -#error Debug port used by serial driver -#endif - -#define UART_CLK 25000000 -#define BASE_BAUD (UART_CLK / 16) -#define REGISTER_BASE_0 0x0208UL -#define REGISTER_BASE_1 0x0238UL - -#define REGISTER_BASE_DBG REGISTER_BASE_1 - -#define CPRR 0x0004 -#define UACFG 0x0200 -#define UAINTS 0x0204 -#define UARBR (REGISTER_BASE_DBG + 0x0000) -#define UATHR (REGISTER_BASE_DBG + 0x0004) -#define UADLL (REGISTER_BASE_DBG + 0x0008) -#define UAIER (REGISTER_BASE_DBG + 0x000c) -#define UADLH (REGISTER_BASE_DBG + 0x0010) -#define UAIIR (REGISTER_BASE_DBG + 0x0014) -#define UAFCR (REGISTER_BASE_DBG + 0x0018) -#define UALCR (REGISTER_BASE_DBG + 0x001c) -#define UAMCR (REGISTER_BASE_DBG + 0x0020) -#define UALSR (REGISTER_BASE_DBG + 0x0024) -#define UAMSR (REGISTER_BASE_DBG + 0x0028) -#define UASCR (REGISTER_BASE_DBG + 0x002c) - -#define PARITY_NONE 0 -#define PARITY_ODD 0x08 -#define PARITY_EVEN 0x18 -#define PARITY_MARK 0x28 -#define PARITY_SPACE 0x38 - -#define DATA_5BIT 0x0 -#define DATA_6BIT 0x1 -#define DATA_7BIT 0x2 -#define DATA_8BIT 0x3 - -#define STOP_1BIT 0x0 -#define STOP_2BIT 0x4 - -#define BAUD_DBG 57600 -#define PARITY_DBG PARITY_NONE -#define DATA_DBG DATA_8BIT -#define STOP_DBG STOP_1BIT - -/* Initialize the serial port for KGDB debugging */ -void __init excite_kgdb_init(void) -{ - const u32 divisor = BASE_BAUD / BAUD_DBG; - - /* Take the UART out of reset */ - titan_writel(0x00ff1cff, CPRR); - titan_writel(0x00000000, UACFG); - titan_writel(0x00000002, UACFG); - - titan_writel(0x0, UALCR); - titan_writel(0x0, UAIER); - - /* Disable FIFOs */ - titan_writel(0x00, UAFCR); - - titan_writel(0x80, UALCR); - titan_writel(divisor & 0xff, UADLL); - titan_writel((divisor & 0xff00) >> 8, UADLH); - titan_writel(0x0, UALCR); - - titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR); - - /* Enable receiver interrupt */ - titan_readl(UARBR); - titan_writel(0x1, UAIER); -} - -int getDebugChar(void) -{ - while (!(titan_readl(UALSR) & 0x1)); - return titan_readl(UARBR); -} - -int putDebugChar(int data) -{ - while (!(titan_readl(UALSR) & 0x20)); - titan_writel(data, UATHR); - return 1; -} - -/* KGDB interrupt handler */ -asmlinkage void excite_kgdb_inthdl(void) -{ - if (unlikely( - ((titan_readl(UAIIR) & 0x7) == 4) - && ((titan_readl(UARBR) & 0xff) == 0x3))) - set_async_breakpoint(®s->cp0_epc); -} diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c index 4903e067916..934e0a6b101 100644 --- a/arch/mips/basler/excite/excite_irq.c +++ b/arch/mips/basler/excite/excite_irq.c @@ -50,10 +50,6 @@ void __init arch_init_irq(void) mips_cpu_irq_init(); rm7k_cpu_irq_init(); rm9k_cpu_irq_init(); - -#ifdef CONFIG_KGDB - excite_kgdb_init(); -#endif } asmlinkage void plat_irq_dispatch(void) @@ -90,9 +86,6 @@ asmlinkage void plat_irq_dispatch(void) msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20)); if ((pending & (1 << TITAN_IRQ)) && msgint) { ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10)); -#if defined(CONFIG_KGDB) - excite_kgdb_inthdl(); -#endif do_IRQ(TITAN_IRQ); return; } diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c index 6dd8f0d46d0..d66b3b8edf2 100644 --- a/arch/mips/basler/excite/excite_setup.c +++ b/arch/mips/basler/excite/excite_setup.c @@ -95,13 +95,13 @@ static int __init excite_init_console(void) /* Take the DUART out of reset */ titan_writel(0x00ff1cff, CPRR); -#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1) +#if (CONFIG_SERIAL_8250_NR_UARTS > 1) /* Enable both ports */ titan_writel(MASK_SER0 | MASK_SER1, UACFG); #else /* Enable port #0 only */ titan_writel(MASK_SER0, UACFG); -#endif /* defined(CONFIG_KGDB) */ +#endif /* * Set up serial port #0. Do not use autodetection; the result is diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index ebb8ad62b3a..a279165e3a7 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index ad4e5ef6559..8944d15caf1 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index d0dc2e83ad3..ab17973107f 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -1174,7 +1174,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=48M" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 9155082313c..b65803f1935 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -1392,7 +1392,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index e4e324422cd..a190ac07740 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1209,7 +1209,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig index 3572e80356d..4e465e94599 100644 --- a/arch/mips/configs/excite_defconfig +++ b/arch/mips/configs/excite_defconfig @@ -1269,7 +1269,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 138c575a015..831d3e5a1ea 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -943,7 +943,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index 59d19472b16..dd13db4d0fb 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -1415,8 +1415,6 @@ CONFIG_FORCED_INLINING=y CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # CONFIG_MIPS_UNCACHED is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index bacf0dd0e34..db9272677aa 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -3020,7 +3020,6 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_KERNEL is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 6dfe6f793ce..9e21e333a2f 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -1085,7 +1085,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index c965a87e6a9..af67ed4f71a 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -1202,7 +1202,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 0778996c682..7956f56cbf3 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -1195,7 +1195,6 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 37c7b5ffd47..723bd5176a3 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -1216,10 +1216,8 @@ CONFIG_DEBUG_MUTEXES=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" +CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index 893e5c4ab66..b5052fb42e9 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -1206,10 +1206,8 @@ CONFIG_DEBUG_SLAB=y CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" +CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index e42aed5a38b..c7c0864b8ce 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -742,7 +742,6 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # # Security options diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 1ea97865f2c..a9acaa2f9da 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -963,7 +963,6 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_SAMPLES is not set CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_SB1XXX_CORELIS is not set # diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index 7f86c43d1bd..ea8249c75b3 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -827,8 +827,6 @@ CONFIG_FORCED_INLINING=y CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_KGDB is not set -CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_RUNTIME_DEBUG is not set # diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c index 11567702b15..d70627de7cf 100644 --- a/arch/mips/emma2rh/markeins/platform.c +++ b/arch/mips/emma2rh/markeins/platform.c @@ -34,7 +34,6 @@ #include #include #include -#include #include #include diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c index 62bfb455d1b..a56c4b804b0 100644 --- a/arch/mips/emma2rh/markeins/setup.c +++ b/arch/mips/emma2rh/markeins/setup.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 0fd31974ba2..73ff048eaa5 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -71,7 +71,6 @@ obj-$(CONFIG_MIPS32_COMPAT) += linux32.o ptrace32.o signal32.o obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o -obj-$(CONFIG_KGDB) += gdb-low.o gdb-stub.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_64BIT) += cpu-bugs64.o diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S deleted file mode 100644 index 2c446063636..00000000000 --- a/arch/mips/kernel/gdb-low.S +++ /dev/null @@ -1,394 +0,0 @@ -/* - * gdb-low.S contains the low-level trap handler for the GDB stub. - * - * Copyright (C) 1995 Andreas Busse - */ -#include - -#include -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_32BIT -#define DMFC0 mfc0 -#define DMTC0 mtc0 -#define LDC1 lwc1 -#define SDC1 lwc1 -#endif -#ifdef CONFIG_64BIT -#define DMFC0 dmfc0 -#define DMTC0 dmtc0 -#define LDC1 ldc1 -#define SDC1 ldc1 -#endif - -/* - * [jsun] We reserves about 2x GDB_FR_SIZE in stack. The lower (addressed) - * part is used to store registers and passed to exception handler. - * The upper part is reserved for "call func" feature where gdb client - * saves some of the regs, setups call frame and passes args. - * - * A trace shows about 200 bytes are used to store about half of all regs. - * The rest should be big enough for frame setup and passing args. - */ - -/* - * The low level trap handler - */ - .align 5 - NESTED(trap_low, GDB_FR_SIZE, sp) - .set noat - .set noreorder - - mfc0 k0, CP0_STATUS - sll k0, 3 /* extract cu0 bit */ - bltz k0, 1f - move k1, sp - - /* - * Called from user mode, go somewhere else. - */ - mfc0 k0, CP0_CAUSE - andi k0, k0, 0x7c -#ifdef CONFIG_64BIT - dsll k0, k0, 1 -#endif - PTR_L k1, saved_vectors(k0) - jr k1 - nop -1: - move k0, sp - PTR_SUBU sp, k1, GDB_FR_SIZE*2 # see comment above - LONG_S k0, GDB_FR_REG29(sp) - LONG_S $2, GDB_FR_REG2(sp) - -/* - * First save the CP0 and special registers - */ - - mfc0 v0, CP0_STATUS - LONG_S v0, GDB_FR_STATUS(sp) - mfc0 v0, CP0_CAUSE - LONG_S v0, GDB_FR_CAUSE(sp) - DMFC0 v0, CP0_EPC - LONG_S v0, GDB_FR_EPC(sp) - DMFC0 v0, CP0_BADVADDR - LONG_S v0, GDB_FR_BADVADDR(sp) - mfhi v0 - LONG_S v0, GDB_FR_HI(sp) - mflo v0 - LONG_S v0, GDB_FR_LO(sp) - -/* - * Now the integer registers - */ - - LONG_S zero, GDB_FR_REG0(sp) /* I know... */ - LONG_S $1, GDB_FR_REG1(sp) - /* v0 already saved */ - LONG_S $3, GDB_FR_REG3(sp) - LONG_S $4, GDB_FR_REG4(sp) - LONG_S $5, GDB_FR_REG5(sp) - LONG_S $6, GDB_FR_REG6(sp) - LONG_S $7, GDB_FR_REG7(sp) - LONG_S $8, GDB_FR_REG8(sp) - LONG_S $9, GDB_FR_REG9(sp) - LONG_S $10, GDB_FR_REG10(sp) - LONG_S $11, GDB_FR_REG11(sp) - LONG_S $12, GDB_FR_REG12(sp) - LONG_S $13, GDB_FR_REG13(sp) - LONG_S $14, GDB_FR_REG14(sp) - LONG_S $15, GDB_FR_REG15(sp) - LONG_S $16, GDB_FR_REG16(sp) - LONG_S $17, GDB_FR_REG17(sp) - LONG_S $18, GDB_FR_REG18(sp) - LONG_S $19, GDB_FR_REG19(sp) - LONG_S $20, GDB_FR_REG20(sp) - LONG_S $21, GDB_FR_REG21(sp) - LONG_S $22, GDB_FR_REG22(sp) - LONG_S $23, GDB_FR_REG23(sp) - LONG_S $24, GDB_FR_REG24(sp) - LONG_S $25, GDB_FR_REG25(sp) - LONG_S $26, GDB_FR_REG26(sp) - LONG_S $27, GDB_FR_REG27(sp) - LONG_S $28, GDB_FR_REG28(sp) - /* sp already saved */ - LONG_S $30, GDB_FR_REG30(sp) - LONG_S $31, GDB_FR_REG31(sp) - - CLI /* disable interrupts */ - TRACE_IRQS_OFF - -/* - * Followed by the floating point registers - */ - mfc0 v0, CP0_STATUS /* FPU enabled? */ - srl v0, v0, 16 - andi v0, v0, (ST0_CU1 >> 16) - - beqz v0,2f /* disabled, skip */ - nop - - SDC1 $0, GDB_FR_FPR0(sp) - SDC1 $1, GDB_FR_FPR1(sp) - SDC1 $2, GDB_FR_FPR2(sp) - SDC1 $3, GDB_FR_FPR3(sp) - SDC1 $4, GDB_FR_FPR4(sp) - SDC1 $5, GDB_FR_FPR5(sp) - SDC1 $6, GDB_FR_FPR6(sp) - SDC1 $7, GDB_FR_FPR7(sp) - SDC1 $8, GDB_FR_FPR8(sp) - SDC1 $9, GDB_FR_FPR9(sp) - SDC1 $10, GDB_FR_FPR10(sp) - SDC1 $11, GDB_FR_FPR11(sp) - SDC1 $12, GDB_FR_FPR12(sp) - SDC1 $13, GDB_FR_FPR13(sp) - SDC1 $14, GDB_FR_FPR14(sp) - SDC1 $15, GDB_FR_FPR15(sp) - SDC1 $16, GDB_FR_FPR16(sp) - SDC1 $17, GDB_FR_FPR17(sp) - SDC1 $18, GDB_FR_FPR18(sp) - SDC1 $19, GDB_FR_FPR19(sp) - SDC1 $20, GDB_FR_FPR20(sp) - SDC1 $21, GDB_FR_FPR21(sp) - SDC1 $22, GDB_FR_FPR22(sp) - SDC1 $23, GDB_FR_FPR23(sp) - SDC1 $24, GDB_FR_FPR24(sp) - SDC1 $25, GDB_FR_FPR25(sp) - SDC1 $26, GDB_FR_FPR26(sp) - SDC1 $27, GDB_FR_FPR27(sp) - SDC1 $28, GDB_FR_FPR28(sp) - SDC1 $29, GDB_FR_FPR29(sp) - SDC1 $30, GDB_FR_FPR30(sp) - SDC1 $31, GDB_FR_FPR31(sp) - -/* - * FPU control registers - */ - - cfc1 v0, CP1_STATUS - LONG_S v0, GDB_FR_FSR(sp) - cfc1 v0, CP1_REVISION - LONG_S v0, GDB_FR_FIR(sp) - -/* - * Current stack frame ptr - */ - -2: - LONG_S sp, GDB_FR_FRP(sp) - -/* - * CP0 registers (R4000/R4400 unused registers skipped) - */ - - mfc0 v0, CP0_INDEX - LONG_S v0, GDB_FR_CP0_INDEX(sp) - mfc0 v0, CP0_RANDOM - LONG_S v0, GDB_FR_CP0_RANDOM(sp) - DMFC0 v0, CP0_ENTRYLO0 - LONG_S v0, GDB_FR_CP0_ENTRYLO0(sp) - DMFC0 v0, CP0_ENTRYLO1 - LONG_S v0, GDB_FR_CP0_ENTRYLO1(sp) - DMFC0 v0, CP0_CONTEXT - LONG_S v0, GDB_FR_CP0_CONTEXT(sp) - mfc0 v0, CP0_PAGEMASK - LONG_S v0, GDB_FR_CP0_PAGEMASK(sp) - mfc0 v0, CP0_WIRED - LONG_S v0, GDB_FR_CP0_WIRED(sp) - DMFC0 v0, CP0_ENTRYHI - LONG_S v0, GDB_FR_CP0_ENTRYHI(sp) - mfc0 v0, CP0_PRID - LONG_S v0, GDB_FR_CP0_PRID(sp) - - .set at - -/* - * Continue with the higher level handler - */ - - move a0,sp - - jal handle_exception - nop - -/* - * Restore all writable registers, in reverse order - */ - - .set noat - - LONG_L v0, GDB_FR_CP0_ENTRYHI(sp) - LONG_L v1, GDB_FR_CP0_WIRED(sp) - DMTC0 v0, CP0_ENTRYHI - mtc0 v1, CP0_WIRED - LONG_L v0, GDB_FR_CP0_PAGEMASK(sp) - LONG_L v1, GDB_FR_CP0_ENTRYLO1(sp) - mtc0 v0, CP0_PAGEMASK - DMTC0 v1, CP0_ENTRYLO1 - LONG_L v0, GDB_FR_CP0_ENTRYLO0(sp) - LONG_L v1, GDB_FR_CP0_INDEX(sp) - DMTC0 v0, CP0_ENTRYLO0 - LONG_L v0, GDB_FR_CP0_CONTEXT(sp) - mtc0 v1, CP0_INDEX - DMTC0 v0, CP0_CONTEXT - - -/* - * Next, the floating point registers - */ - mfc0 v0, CP0_STATUS /* check if the FPU is enabled */ - srl v0, v0, 16 - andi v0, v0, (ST0_CU1 >> 16) - - beqz v0, 3f /* disabled, skip */ - nop - - LDC1 $31, GDB_FR_FPR31(sp) - LDC1 $30, GDB_FR_FPR30(sp) - LDC1 $29, GDB_FR_FPR29(sp) - LDC1 $28, GDB_FR_FPR28(sp) - LDC1 $27, GDB_FR_FPR27(sp) - LDC1 $26, GDB_FR_FPR26(sp) - LDC1 $25, GDB_FR_FPR25(sp) - LDC1 $24, GDB_FR_FPR24(sp) - LDC1 $23, GDB_FR_FPR23(sp) - LDC1 $22, GDB_FR_FPR22(sp) - LDC1 $21, GDB_FR_FPR21(sp) - LDC1 $20, GDB_FR_FPR20(sp) - LDC1 $19, GDB_FR_FPR19(sp) - LDC1 $18, GDB_FR_FPR18(sp) - LDC1 $17, GDB_FR_FPR17(sp) - LDC1 $16, GDB_FR_FPR16(sp) - LDC1 $15, GDB_FR_FPR15(sp) - LDC1 $14, GDB_FR_FPR14(sp) - LDC1 $13, GDB_FR_FPR13(sp) - LDC1 $12, GDB_FR_FPR12(sp) - LDC1 $11, GDB_FR_FPR11(sp) - LDC1 $10, GDB_FR_FPR10(sp) - LDC1 $9, GDB_FR_FPR9(sp) - LDC1 $8, GDB_FR_FPR8(sp) - LDC1 $7, GDB_FR_FPR7(sp) - LDC1 $6, GDB_FR_FPR6(sp) - LDC1 $5, GDB_FR_FPR5(sp) - LDC1 $4, GDB_FR_FPR4(sp) - LDC1 $3, GDB_FR_FPR3(sp) - LDC1 $2, GDB_FR_FPR2(sp) - LDC1 $1, GDB_FR_FPR1(sp) - LDC1 $0, GDB_FR_FPR0(sp) - -/* - * Now the CP0 and integer registers - */ - -3: -#ifdef CONFIG_MIPS_MT_SMTC - /* Read-modify write of Status must be atomic */ - mfc0 t2, CP0_TCSTATUS - ori t1, t2, TCSTATUS_IXMT - mtc0 t1, CP0_TCSTATUS - andi t2, t2, TCSTATUS_IXMT - _ehb - DMT 9 # dmt t1 - jal mips_ihb - nop -#endif /* CONFIG_MIPS_MT_SMTC */ - mfc0 t0, CP0_STATUS - ori t0, 0x1f - xori t0, 0x1f - mtc0 t0, CP0_STATUS -#ifdef CONFIG_MIPS_MT_SMTC - andi t1, t1, VPECONTROL_TE - beqz t1, 9f - nop - EMT # emt -9: - mfc0 t1, CP0_TCSTATUS - xori t1, t1, TCSTATUS_IXMT - or t1, t1, t2 - mtc0 t1, CP0_TCSTATUS - _ehb -#endif /* CONFIG_MIPS_MT_SMTC */ - LONG_L v0, GDB_FR_STATUS(sp) - LONG_L v1, GDB_FR_EPC(sp) - mtc0 v0, CP0_STATUS - DMTC0 v1, CP0_EPC - LONG_L v0, GDB_FR_HI(sp) - LONG_L v1, GDB_FR_LO(sp) - mthi v0 - mtlo v1 - LONG_L $31, GDB_FR_REG31(sp) - LONG_L $30, GDB_FR_REG30(sp) - LONG_L $28, GDB_FR_REG28(sp) - LONG_L $27, GDB_FR_REG27(sp) - LONG_L $26, GDB_FR_REG26(sp) - LONG_L $25, GDB_FR_REG25(sp) - LONG_L $24, GDB_FR_REG24(sp) - LONG_L $23, GDB_FR_REG23(sp) - LONG_L $22, GDB_FR_REG22(sp) - LONG_L $21, GDB_FR_REG21(sp) - LONG_L $20, GDB_FR_REG20(sp) - LONG_L $19, GDB_FR_REG19(sp) - LONG_L $18, GDB_FR_REG18(sp) - LONG_L $17, GDB_FR_REG17(sp) - LONG_L $16, GDB_FR_REG16(sp) - LONG_L $15, GDB_FR_REG15(sp) - LONG_L $14, GDB_FR_REG14(sp) - LONG_L $13, GDB_FR_REG13(sp) - LONG_L $12, GDB_FR_REG12(sp) - LONG_L $11, GDB_FR_REG11(sp) - LONG_L $10, GDB_FR_REG10(sp) - LONG_L $9, GDB_FR_REG9(sp) - LONG_L $8, GDB_FR_REG8(sp) - LONG_L $7, GDB_FR_REG7(sp) - LONG_L $6, GDB_FR_REG6(sp) - LONG_L $5, GDB_FR_REG5(sp) - LONG_L $4, GDB_FR_REG4(sp) - LONG_L $3, GDB_FR_REG3(sp) - LONG_L $2, GDB_FR_REG2(sp) - LONG_L $1, GDB_FR_REG1(sp) -#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) - LONG_L k0, GDB_FR_EPC(sp) - LONG_L $29, GDB_FR_REG29(sp) /* Deallocate stack */ - jr k0 - rfe -#else - LONG_L sp, GDB_FR_REG29(sp) /* Deallocate stack */ - - .set mips3 - eret - .set mips0 -#endif - .set at - .set reorder - END(trap_low) - -LEAF(kgdb_read_byte) -4: lb t0, (a0) - sb t0, (a1) - li v0, 0 - jr ra - .section __ex_table,"a" - PTR 4b, kgdbfault - .previous - END(kgdb_read_byte) - -LEAF(kgdb_write_byte) -5: sb a0, (a1) - li v0, 0 - jr ra - .section __ex_table,"a" - PTR 5b, kgdbfault - .previous - END(kgdb_write_byte) - - .type kgdbfault@function - .ent kgdbfault - -kgdbfault: li v0, -EFAULT - jr ra - .end kgdbfault diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c deleted file mode 100644 index 25f4eab8ea9..00000000000 --- a/arch/mips/kernel/gdb-stub.c +++ /dev/null @@ -1,1155 +0,0 @@ -/* - * arch/mips/kernel/gdb-stub.c - * - * Originally written by Glenn Engel, Lake Stevens Instrument Division - * - * Contributed by HP Systems - * - * Modified for SPARC by Stu Grossman, Cygnus Support. - * - * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse - * Send complaints, suggestions etc. to - * - * Copyright (C) 1995 Andreas Busse - * - * Copyright (C) 2003 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - */ - -/* - * To enable debugger support, two things need to happen. One, a - * call to set_debug_traps() is necessary in order to allow any breakpoints - * or error conditions to be properly intercepted and reported to gdb. - * Two, a breakpoint needs to be generated to begin communication. This - * is most easily accomplished by a call to breakpoint(). Breakpoint() - * simulates a breakpoint by executing a BREAK instruction. - * - * - * The following gdb commands are supported: - * - * command function Return value - * - * g return the value of the CPU registers hex data or ENN - * G set the value of the CPU registers OK or ENN - * - * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN - * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN - * - * c Resume at current address SNN ( signal NN) - * cAA..AA Continue at address AA..AA SNN - * - * s Step one instruction SNN - * sAA..AA Step one instruction from AA..AA SNN - * - * k kill - * - * ? What was the last sigval ? SNN (signal NN) - * - * bBB..BB Set baud rate to BB..BB OK or BNN, then sets - * baud rate - * - * All commands and responses are sent with a packet which includes a - * checksum. A packet consists of - * - * $#. - * - * where - * :: - * :: < two hex digits computed as modulo 256 sum of > - * - * When a packet is received, it is first acknowledged with either '+' or '-'. - * '+' indicates a successful transfer. '-' indicates a failed transfer. - * - * Example: - * - * Host: Reply: - * $m0,10#2a +$00010203040506070809101112131415#42 - * - * - * ============== - * MORE EXAMPLES: - * ============== - * - * For reference -- the following are the steps that one - * company took (RidgeRun Inc) to get remote gdb debugging - * going. In this scenario the host machine was a PC and the - * target platform was a Galileo EVB64120A MIPS evaluation - * board. - * - * Step 1: - * First download gdb-5.0.tar.gz from the internet. - * and then build/install the package. - * - * Example: - * $ tar zxf gdb-5.0.tar.gz - * $ cd gdb-5.0 - * $ ./configure --target=mips-linux-elf - * $ make - * $ install - * $ which mips-linux-elf-gdb - * /usr/local/bin/mips-linux-elf-gdb - * - * Step 2: - * Configure linux for remote debugging and build it. - * - * Example: - * $ cd ~/linux - * $ make menuconfig - * $ make - * - * Step 3: - * Download the kernel to the remote target and start - * the kernel running. It will promptly halt and wait - * for the host gdb session to connect. It does this - * since the "Kernel Hacking" option has defined - * CONFIG_KGDB which in turn enables your calls - * to: - * set_debug_traps(); - * breakpoint(); - * - * Step 4: - * Start the gdb session on the host. - * - * Example: - * $ mips-linux-elf-gdb vmlinux - * (gdb) set remotebaud 115200 - * (gdb) target remote /dev/ttyS1 - * ...at this point you are connected to - * the remote target and can use gdb - * in the normal fasion. Setting - * breakpoints, single stepping, - * printing variables, etc. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -/* - * external low-level support routines - */ - -extern int putDebugChar(char c); /* write a single character */ -extern char getDebugChar(void); /* read and return a single char */ -extern void trap_low(void); - -/* - * breakpoint and test functions - */ -extern void breakpoint(void); -extern void breakinst(void); -extern void async_breakpoint(void); -extern void async_breakinst(void); -extern void adel(void); - -/* - * local prototypes - */ - -static void getpacket(char *buffer); -static void putpacket(char *buffer); -static int computeSignal(int tt); -static int hex(unsigned char ch); -static int hexToInt(char **ptr, int *intValue); -static int hexToLong(char **ptr, long *longValue); -static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault); -void handle_exception(struct gdb_regs *regs); - -int kgdb_enabled; - -/* - * spin locks for smp case - */ -static DEFINE_SPINLOCK(kgdb_lock); -static raw_spinlock_t kgdb_cpulock[NR_CPUS] = { - [0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED, -}; - -/* - * BUFMAX defines the maximum number of characters in inbound/outbound buffers - * at least NUMREGBYTES*2 are needed for register packets - */ -#define BUFMAX 2048 - -static char input_buffer[BUFMAX]; -static char output_buffer[BUFMAX]; -static int initialized; /* !0 means we've been initialized */ -static int kgdb_started; -static const char hexchars[]="0123456789abcdef"; - -/* Used to prevent crashes in memory access. Note that they'll crash anyway if - we haven't set up fault handlers yet... */ -int kgdb_read_byte(unsigned char *address, unsigned char *dest); -int kgdb_write_byte(unsigned char val, unsigned char *dest); - -/* - * Convert ch from a hex digit to an int - */ -static int hex(unsigned char ch) -{ - if (ch >= 'a' && ch <= 'f') - return ch-'a'+10; - if (ch >= '0' && ch <= '9') - return ch-'0'; - if (ch >= 'A' && ch <= 'F') - return ch-'A'+10; - return -1; -} - -/* - * scan for the sequence $# - */ -static void getpacket(char *buffer) -{ - unsigned char checksum; - unsigned char xmitcsum; - int i; - int count; - unsigned char ch; - - do { - /* - * wait around for the start character, - * ignore all other characters - */ - while ((ch = (getDebugChar() & 0x7f)) != '$') ; - - checksum = 0; - xmitcsum = -1; - count = 0; - - /* - * now, read until a # or end of buffer is found - */ - while (count < BUFMAX) { - ch = getDebugChar(); - if (ch == '#') - break; - checksum = checksum + ch; - buffer[count] = ch; - count = count + 1; - } - - if (count >= BUFMAX) - continue; - - buffer[count] = 0; - - if (ch == '#') { - xmitcsum = hex(getDebugChar() & 0x7f) << 4; - xmitcsum |= hex(getDebugChar() & 0x7f); - - if (checksum != xmitcsum) - putDebugChar('-'); /* failed checksum */ - else { - putDebugChar('+'); /* successful transfer */ - - /* - * if a sequence char is present, - * reply the sequence ID - */ - if (buffer[2] == ':') { - putDebugChar(buffer[0]); - putDebugChar(buffer[1]); - - /* - * remove sequence chars from buffer - */ - count = strlen(buffer); - for (i=3; i <= count; i++) - buffer[i-3] = buffer[i]; - } - } - } - } - while (checksum != xmitcsum); -} - -/* - * send the packet in buffer. - */ -static void putpacket(char *buffer) -{ - unsigned char checksum; - int count; - unsigned char ch; - - /* - * $#. - */ - - do { - putDebugChar('$'); - checksum = 0; - count = 0; - - while ((ch = buffer[count]) != 0) { - if (!(putDebugChar(ch))) - return; - checksum += ch; - count += 1; - } - - putDebugChar('#'); - putDebugChar(hexchars[checksum >> 4]); - putDebugChar(hexchars[checksum & 0xf]); - - } - while ((getDebugChar() & 0x7f) != '+'); -} - - -/* - * Convert the memory pointed to by mem into hex, placing result in buf. - * Return a pointer to the last char put in buf (null), in case of mem fault, - * return 0. - * may_fault is non-zero if we are reading from arbitrary memory, but is currently - * not used. - */ -static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault) -{ - unsigned char ch; - - while (count-- > 0) { - if (kgdb_read_byte(mem++, &ch) != 0) - return 0; - *buf++ = hexchars[ch >> 4]; - *buf++ = hexchars[ch & 0xf]; - } - - *buf = 0; - - return buf; -} - -/* - * convert the hex array pointed to by buf into binary to be placed in mem - * return a pointer to the character AFTER the last byte written - * may_fault is non-zero if we are reading from arbitrary memory, but is currently - * not used. - */ -static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault) -{ - int i; - unsigned char ch; - - for (i=0; itt && ht->signo; ht++) - saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low); - - putDebugChar('+'); /* 'hello world' */ - /* - * In case GDB is started before us, ack any packets - * (presumably "$?#xx") sitting there. - */ - while((c = getDebugChar()) != '$'); - while((c = getDebugChar()) != '#'); - c = getDebugChar(); /* eat first csum byte */ - c = getDebugChar(); /* eat second csum byte */ - putDebugChar('+'); /* ack it */ - - initialized = 1; - local_irq_restore(flags); -} - -void restore_debug_traps(void) -{ - struct hard_trap_info *ht; - unsigned long flags; - - local_irq_save(flags); - for (ht = hard_trap_info; ht->tt && ht->signo; ht++) - set_except_vector(ht->tt, saved_vectors[ht->tt]); - local_irq_restore(flags); -} - -/* - * Convert the MIPS hardware trap type code to a Unix signal number. - */ -static int computeSignal(int tt) -{ - struct hard_trap_info *ht; - - for (ht = hard_trap_info; ht->tt && ht->signo; ht++) - if (ht->tt == tt) - return ht->signo; - - return SIGHUP; /* default for things we don't know about */ -} - -/* - * While we find nice hex chars, build an int. - * Return number of chars processed. - */ -static int hexToInt(char **ptr, int *intValue) -{ - int numChars = 0; - int hexValue; - - *intValue = 0; - - while (**ptr) { - hexValue = hex(**ptr); - if (hexValue < 0) - break; - - *intValue = (*intValue << 4) | hexValue; - numChars ++; - - (*ptr)++; - } - - return (numChars); -} - -static int hexToLong(char **ptr, long *longValue) -{ - int numChars = 0; - int hexValue; - - *longValue = 0; - - while (**ptr) { - hexValue = hex(**ptr); - if (hexValue < 0) - break; - - *longValue = (*longValue << 4) | hexValue; - numChars ++; - - (*ptr)++; - } - - return numChars; -} - - -#if 0 -/* - * Print registers (on target console) - * Used only to debug the stub... - */ -void show_gdbregs(struct gdb_regs * regs) -{ - /* - * Saved main processor registers - */ - printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg0, regs->reg1, regs->reg2, regs->reg3, - regs->reg4, regs->reg5, regs->reg6, regs->reg7); - printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg8, regs->reg9, regs->reg10, regs->reg11, - regs->reg12, regs->reg13, regs->reg14, regs->reg15); - printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg16, regs->reg17, regs->reg18, regs->reg19, - regs->reg20, regs->reg21, regs->reg22, regs->reg23); - printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n", - regs->reg24, regs->reg25, regs->reg26, regs->reg27, - regs->reg28, regs->reg29, regs->reg30, regs->reg31); - - /* - * Saved cp0 registers - */ - printk("epc : %08lx\nStatus: %08lx\nCause : %08lx\n", - regs->cp0_epc, regs->cp0_status, regs->cp0_cause); -} -#endif /* dead code */ - -/* - * We single-step by setting breakpoints. When an exception - * is handled, we need to restore the instructions hoisted - * when the breakpoints were set. - * - * This is where we save the original instructions. - */ -static struct gdb_bp_save { - unsigned long addr; - unsigned int val; -} step_bp[2]; - -#define BP 0x0000000d /* break opcode */ - -/* - * Set breakpoint instructions for single stepping. - */ -static void single_step(struct gdb_regs *regs) -{ - union mips_instruction insn; - unsigned long targ; - int is_branch, is_cond, i; - - targ = regs->cp0_epc; - insn.word = *(unsigned int *)targ; - is_branch = is_cond = 0; - - switch (insn.i_format.opcode) { - /* - * jr and jalr are in r_format format. - */ - case spec_op: - switch (insn.r_format.func) { - case jalr_op: - case jr_op: - targ = *(®s->reg0 + insn.r_format.rs); - is_branch = 1; - break; - } - break; - - /* - * This group contains: - * bltz_op, bgez_op, bltzl_op, bgezl_op, - * bltzal_op, bgezal_op, bltzall_op, bgezall_op. - */ - case bcond_op: - is_branch = is_cond = 1; - targ += 4 + (insn.i_format.simmediate << 2); - break; - - /* - * These are unconditional and in j_format. - */ - case jal_op: - case j_op: - is_branch = 1; - targ += 4; - targ >>= 28; - targ <<= 28; - targ |= (insn.j_format.target << 2); - break; - - /* - * These are conditional. - */ - case beq_op: - case beql_op: - case bne_op: - case bnel_op: - case blez_op: - case blezl_op: - case bgtz_op: - case bgtzl_op: - case cop0_op: - case cop1_op: - case cop2_op: - case cop1x_op: - is_branch = is_cond = 1; - targ += 4 + (insn.i_format.simmediate << 2); - break; - } - - if (is_branch) { - i = 0; - if (is_cond && targ != (regs->cp0_epc + 8)) { - step_bp[i].addr = regs->cp0_epc + 8; - step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8); - *(unsigned *)(regs->cp0_epc + 8) = BP; - } - step_bp[i].addr = targ; - step_bp[i].val = *(unsigned *)targ; - *(unsigned *)targ = BP; - } else { - step_bp[0].addr = regs->cp0_epc + 4; - step_bp[0].val = *(unsigned *)(regs->cp0_epc + 4); - *(unsigned *)(regs->cp0_epc + 4) = BP; - } -} - -/* - * If asynchronously interrupted by gdb, then we need to set a breakpoint - * at the interrupted instruction so that we wind up stopped with a - * reasonable stack frame. - */ -static struct gdb_bp_save async_bp; - -/* - * Swap the interrupted EPC with our asynchronous breakpoint routine. - * This is safer than stuffing the breakpoint in-place, since no cache - * flushes (or resulting smp_call_functions) are required. The - * assumption is that only one CPU will be handling asynchronous bp's, - * and only one can be active at a time. - */ -extern spinlock_t smp_call_lock; - -void set_async_breakpoint(unsigned long *epc) -{ - /* skip breaking into userland */ - if ((*epc & 0x80000000) == 0) - return; - -#ifdef CONFIG_SMP - /* avoid deadlock if someone is make IPC */ - if (spin_is_locked(&smp_call_lock)) - return; -#endif - - async_bp.addr = *epc; - *epc = (unsigned long)async_breakpoint; -} - -#ifdef CONFIG_SMP -static void kgdb_wait(void *arg) -{ - unsigned flags; - int cpu = smp_processor_id(); - - local_irq_save(flags); - - __raw_spin_lock(&kgdb_cpulock[cpu]); - __raw_spin_unlock(&kgdb_cpulock[cpu]); - - local_irq_restore(flags); -} -#endif - -/* - * GDB stub needs to call kgdb_wait on all processor with interrupts - * disabled, so it uses it's own special variant. - */ -static int kgdb_smp_call_kgdb_wait(void) -{ -#ifdef CONFIG_SMP - cpumask_t mask = cpu_online_map; - struct call_data_struct data; - int cpu = smp_processor_id(); - int cpus; - - /* - * Can die spectacularly if this CPU isn't yet marked online - */ - BUG_ON(!cpu_online(cpu)); - - cpu_clear(cpu, mask); - cpus = cpus_weight(mask); - if (!cpus) - return 0; - - if (spin_is_locked(&smp_call_lock)) { - /* - * Some other processor is trying to make us do something - * but we're not going to respond... give up - */ - return -1; - } - - /* - * We will continue here, accepting the fact that - * the kernel may deadlock if another CPU attempts - * to call smp_call_function now... - */ - - data.func = kgdb_wait; - data.info = NULL; - atomic_set(&data.started, 0); - data.wait = 0; - - spin_lock(&smp_call_lock); - call_data = &data; - mb(); - - core_send_ipi_mask(mask, SMP_CALL_FUNCTION); - - /* Wait for response */ - /* FIXME: lock-up detection, backtrace on lock-up */ - while (atomic_read(&data.started) != cpus) - barrier(); - - call_data = NULL; - spin_unlock(&smp_call_lock); -#endif - - return 0; -} - -/* - * This function does all command processing for interfacing to gdb. It - * returns 1 if you should skip the instruction at the trap address, 0 - * otherwise. - */ -void handle_exception(struct gdb_regs *regs) -{ - int trap; /* Trap type */ - int sigval; - long addr; - int length; - char *ptr; - unsigned long *stack; - int i; - int bflag = 0; - - kgdb_started = 1; - - /* - * acquire the big kgdb spinlock - */ - if (!spin_trylock(&kgdb_lock)) { - /* - * some other CPU has the lock, we should go back to - * receive the gdb_wait IPC - */ - return; - } - - /* - * If we're in async_breakpoint(), restore the real EPC from - * the breakpoint. - */ - if (regs->cp0_epc == (unsigned long)async_breakinst) { - regs->cp0_epc = async_bp.addr; - async_bp.addr = 0; - } - - /* - * acquire the CPU spinlocks - */ - for_each_online_cpu(i) - if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0) - panic("kgdb: couldn't get cpulock %d\n", i); - - /* - * force other cpus to enter kgdb - */ - kgdb_smp_call_kgdb_wait(); - - /* - * If we're in breakpoint() increment the PC - */ - trap = (regs->cp0_cause & 0x7c) >> 2; - if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst) - regs->cp0_epc += 4; - - /* - * If we were single_stepping, restore the opcodes hoisted - * for the breakpoint[s]. - */ - if (step_bp[0].addr) { - *(unsigned *)step_bp[0].addr = step_bp[0].val; - step_bp[0].addr = 0; - - if (step_bp[1].addr) { - *(unsigned *)step_bp[1].addr = step_bp[1].val; - step_bp[1].addr = 0; - } - } - - stack = (long *)regs->reg29; /* stack ptr */ - sigval = computeSignal(trap); - - /* - * reply to host that an exception has occurred - */ - ptr = output_buffer; - - /* - * Send trap type (converted to signal) - */ - *ptr++ = 'T'; - *ptr++ = hexchars[sigval >> 4]; - *ptr++ = hexchars[sigval & 0xf]; - - /* - * Send Error PC - */ - *ptr++ = hexchars[REG_EPC >> 4]; - *ptr++ = hexchars[REG_EPC & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®s->cp0_epc, ptr, sizeof(long), 0); - *ptr++ = ';'; - - /* - * Send frame pointer - */ - *ptr++ = hexchars[REG_FP >> 4]; - *ptr++ = hexchars[REG_FP & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®s->reg30, ptr, sizeof(long), 0); - *ptr++ = ';'; - - /* - * Send stack pointer - */ - *ptr++ = hexchars[REG_SP >> 4]; - *ptr++ = hexchars[REG_SP & 0xf]; - *ptr++ = ':'; - ptr = mem2hex((char *)®s->reg29, ptr, sizeof(long), 0); - *ptr++ = ';'; - - *ptr++ = 0; - putpacket(output_buffer); /* send it off... */ - - /* - * Wait for input from remote GDB - */ - while (1) { - output_buffer[0] = 0; - getpacket(input_buffer); - - switch (input_buffer[0]) - { - case '?': - output_buffer[0] = 'S'; - output_buffer[1] = hexchars[sigval >> 4]; - output_buffer[2] = hexchars[sigval & 0xf]; - output_buffer[3] = 0; - break; - - /* - * Detach debugger; let CPU run - */ - case 'D': - putpacket(output_buffer); - goto finish_kgdb; - break; - - case 'd': - /* toggle debug flag */ - break; - - /* - * Return the value of the CPU registers - */ - case 'g': - ptr = output_buffer; - ptr = mem2hex((char *)®s->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */ - ptr = mem2hex((char *)®s->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */ - ptr = mem2hex((char *)®s->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */ - ptr = mem2hex((char *)®s->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */ - ptr = mem2hex((char *)®s->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */ - ptr = mem2hex((char *)®s->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */ - break; - - /* - * set the value of the CPU registers - return OK - */ - case 'G': - { - ptr = &input_buffer[1]; - hex2mem(ptr, (char *)®s->reg0, 32*sizeof(long), 0, 0); - ptr += 32*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->cp0_status, 6*sizeof(long), 0, 0); - ptr += 6*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->fpr0, 32*sizeof(long), 0, 0); - ptr += 32*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->cp1_fsr, 2*sizeof(long), 0, 0); - ptr += 2*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->frame_ptr, 2*sizeof(long), 0, 0); - ptr += 2*(2*sizeof(long)); - hex2mem(ptr, (char *)®s->cp0_index, 16*sizeof(long), 0, 0); - strcpy(output_buffer, "OK"); - } - break; - - /* - * mAA..AA,LLLL Read LLLL bytes at address AA..AA - */ - case 'm': - ptr = &input_buffer[1]; - - if (hexToLong(&ptr, &addr) - && *ptr++ == ',' - && hexToInt(&ptr, &length)) { - if (mem2hex((char *)addr, output_buffer, length, 1)) - break; - strcpy(output_buffer, "E03"); - } else - strcpy(output_buffer, "E01"); - break; - - /* - * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA - */ - case 'X': - bflag = 1; - /* fall through */ - - /* - * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK - */ - case 'M': - ptr = &input_buffer[1]; - - if (hexToLong(&ptr, &addr) - && *ptr++ == ',' - && hexToInt(&ptr, &length) - && *ptr++ == ':') { - if (hex2mem(ptr, (char *)addr, length, bflag, 1)) - strcpy(output_buffer, "OK"); - else - strcpy(output_buffer, "E03"); - } - else - strcpy(output_buffer, "E02"); - break; - - /* - * cAA..AA Continue at address AA..AA(optional) - */ - case 'c': - /* try to read optional parameter, pc unchanged if no parm */ - - ptr = &input_buffer[1]; - if (hexToLong(&ptr, &addr)) - regs->cp0_epc = addr; - - goto exit_kgdb_exception; - break; - - /* - * kill the program; let us try to restart the machine - * Reset the whole machine. - */ - case 'k': - case 'r': - machine_restart("kgdb restarts machine"); - break; - - /* - * Step to next instruction - */ - case 's': - /* - * There is no single step insn in the MIPS ISA, so we - * use breakpoints and continue, instead. - */ - single_step(regs); - goto exit_kgdb_exception; - /* NOTREACHED */ - break; - - /* - * Set baud rate (bBB) - * FIXME: Needs to be written - */ - case 'b': - { -#if 0 - int baudrate; - extern void set_timer_3(); - - ptr = &input_buffer[1]; - if (!hexToInt(&ptr, &baudrate)) - { - strcpy(output_buffer, "B01"); - break; - } - - /* Convert baud rate to uart clock divider */ - - switch (baudrate) - { - case 38400: - baudrate = 16; - break; - case 19200: - baudrate = 33; - break; - case 9600: - baudrate = 65; - break; - default: - baudrate = 0; - strcpy(output_buffer, "B02"); - goto x1; - } - - if (baudrate) { - putpacket("OK"); /* Ack before changing speed */ - set_timer_3(baudrate); /* Set it */ - } -#endif - } - break; - - } /* switch */ - - /* - * reply to the request - */ - - putpacket(output_buffer); - - } /* while */ - - return; - -finish_kgdb: - restore_debug_traps(); - -exit_kgdb_exception: - /* release locks so other CPUs can go */ - for_each_online_cpu(i) - __raw_spin_unlock(&kgdb_cpulock[i]); - spin_unlock(&kgdb_lock); - - __flush_cache_all(); - return; -} - -/* - * This function will generate a breakpoint exception. It is used at the - * beginning of a program to sync up with a debugger and can be used - * otherwise as a quick means to stop program execution and "break" into - * the debugger. - */ -void breakpoint(void) -{ - if (!initialized) - return; - - __asm__ __volatile__( - ".globl breakinst\n\t" - ".set\tnoreorder\n\t" - "nop\n" - "breakinst:\tbreak\n\t" - "nop\n\t" - ".set\treorder" - ); -} - -/* Nothing but the break; don't pollute any registers */ -void async_breakpoint(void) -{ - __asm__ __volatile__( - ".globl async_breakinst\n\t" - ".set\tnoreorder\n\t" - "nop\n" - "async_breakinst:\tbreak\n\t" - "nop\n\t" - ".set\treorder" - ); -} - -void adel(void) -{ - __asm__ __volatile__( - ".globl\tadel\n\t" - "lui\t$8,0x8000\n\t" - "lw\t$9,1($8)\n\t" - ); -} - -/* - * malloc is needed by gdb client in "call func()", even a private one - * will make gdb happy - */ -static void __used *malloc(size_t size) -{ - return kmalloc(size, GFP_ATOMIC); -} - -static void __used free(void *where) -{ - kfree(where); -} - -#ifdef CONFIG_GDB_CONSOLE - -void gdb_putsn(const char *str, int l) -{ - char outbuf[18]; - - if (!kgdb_started) - return; - - outbuf[0]='O'; - - while(l) { - int i = (l>8)?8:l; - mem2hex((char *)str, &outbuf[1], i, 0); - outbuf[(i*2)+1]=0; - putpacket(outbuf); - str += i; - l -= i; - } -} - -static void gdb_console_write(struct console *con, const char *s, unsigned n) -{ - gdb_putsn(s, n); -} - -static struct console gdb_console = { - .name = "gdb", - .write = gdb_console_write, - .flags = CON_PRINTBUFFER, - .index = -1 -}; - -static int __init register_gdb_console(void) -{ - register_console(&gdb_console); - - return 0; -} - -console_initcall(register_gdb_console); - -#endif diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index 6045b9a51a3..8acba0880d9 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -126,19 +126,6 @@ asmlinkage void spurious_interrupt(void) atomic_inc(&irq_err_count); } -#ifdef CONFIG_KGDB -extern void breakpoint(void); -extern void set_debug_traps(void); - -static int kgdb_flag = 1; -static int __init nokgdb(char *str) -{ - kgdb_flag = 0; - return 1; -} -__setup("nokgdb", nokgdb); -#endif - void __init init_IRQ(void) { int i; @@ -147,12 +134,4 @@ void __init init_IRQ(void) set_irq_noprobe(i); arch_init_irq(); - -#ifdef CONFIG_KGDB - if (kgdb_flag) { - printk("Wait for gdb client connection ...\n"); - set_debug_traps(); - breakpoint(); - } -#endif } diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile index f8064446e81..3b7dd722c32 100644 --- a/arch/mips/mti-malta/Makefile +++ b/arch/mips/mti-malta/Makefile @@ -13,7 +13,6 @@ obj-y := malta-amon.o malta-cmdline.o \ obj-$(CONFIG_EARLY_PRINTK) += malta-console.o obj-$(CONFIG_PCI) += malta-pci.o -obj-$(CONFIG_KGDB) += malta-kgdb.o # FIXME FIXME FIXME obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index c0653021a17..4832af25166 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -37,15 +37,6 @@ #include -#ifdef CONFIG_KGDB -extern int rs_kgdb_hook(int, int); -extern int rs_putDebugChar(char); -extern char rs_getDebugChar(void); -extern int saa9730_kgdb_hook(int); -extern int saa9730_putDebugChar(char); -extern char saa9730_getDebugChar(void); -#endif - int prom_argc; int *_prom_argv, *_prom_envp; @@ -173,51 +164,6 @@ static void __init console_config(void) } #endif -#ifdef CONFIG_KGDB -void __init kgdb_config(void) -{ - extern int (*generic_putDebugChar)(char); - extern char (*generic_getDebugChar)(void); - char *argptr; - int line, speed; - - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { - argptr += strlen("kgdb=ttyS"); - if (*argptr != '0' && *argptr != '1') - printk("KGDB: Unknown serial line /dev/ttyS%c, " - "falling back to /dev/ttyS1\n", *argptr); - line = *argptr == '0' ? 0 : 1; - printk("KGDB: Using serial line /dev/ttyS%d for session\n", line); - - speed = 0; - if (*++argptr == ',') - { - int c; - while ((c = *++argptr) && ('0' <= c && c <= '9')) - speed = speed * 10 + c - '0'; - } - { - speed = rs_kgdb_hook(line, speed); - generic_putDebugChar = rs_putDebugChar; - generic_getDebugChar = rs_getDebugChar; - } - - pr_info("KGDB: Using serial line /dev/ttyS%d at %d for " - "session, please connect your debugger\n", - line ? 1 : 0, speed); - - { - char *s; - for (s = "Please connect GDB to this port\r\n"; *s; ) - generic_putDebugChar(*s++); - } - - /* Breakpoint is invoked after interrupts are initialised */ - } -} -#endif - static void __init mips_nmi_setup(void) { void *base; diff --git a/arch/mips/mti-malta/malta-kgdb.c b/arch/mips/mti-malta/malta-kgdb.c deleted file mode 100644 index 6a1854de457..00000000000 --- a/arch/mips/mti-malta/malta-kgdb.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * This is the interface to the remote debugger stub. - */ -#include -#include -#include -#include - -#include -#include - -static struct serial_state rs_table[] = { - SERIAL_PORT_DFNS /* Defined in serial.h */ -}; - -static struct async_struct kdb_port_info = {0}; - -int (*generic_putDebugChar)(char); -char (*generic_getDebugChar)(void); - -static __inline__ unsigned int serial_in(struct async_struct *info, int offset) -{ - return inb(info->port + offset); -} - -static __inline__ void serial_out(struct async_struct *info, int offset, - int value) -{ - outb(value, info->port+offset); -} - -int rs_kgdb_hook(int tty_no, int speed) { - int t; - struct serial_state *ser = &rs_table[tty_no]; - - kdb_port_info.state = ser; - kdb_port_info.magic = SERIAL_MAGIC; - kdb_port_info.port = ser->port; - kdb_port_info.flags = ser->flags; - - /* - * Clear all interrupts - */ - serial_in(&kdb_port_info, UART_LSR); - serial_in(&kdb_port_info, UART_RX); - serial_in(&kdb_port_info, UART_IIR); - serial_in(&kdb_port_info, UART_MSR); - - /* - * Now, initialize the UART - */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */ - if (kdb_port_info.flags & ASYNC_FOURPORT) { - kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS; - t = UART_MCR_DTR | UART_MCR_OUT1; - } else { - kdb_port_info.MCR - = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; - t = UART_MCR_DTR | UART_MCR_RTS; - } - - kdb_port_info.MCR = t; /* no interrupts, please */ - serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR); - - /* - * and set the speed of the serial port - */ - if (speed == 0) - speed = 9600; - - t = kdb_port_info.state->baud_base / speed; - /* set DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB); - serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */ - serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */ - /* reset DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); - - return speed; -} - -int putDebugChar(char c) -{ - return generic_putDebugChar(c); -} - -char getDebugChar(void) -{ - return generic_getDebugChar(); -} - -int rs_putDebugChar(char c) -{ - - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0) - ; - - serial_out(&kdb_port_info, UART_TX, c); - - return 1; -} - -char rs_getDebugChar(void) -{ - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while (!(serial_in(&kdb_port_info, UART_LSR) & 1)) - ; - - return serial_in(&kdb_port_info, UART_RX); -} diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c index e7cad54936c..dc78b8983ee 100644 --- a/arch/mips/mti-malta/malta-setup.c +++ b/arch/mips/mti-malta/malta-setup.c @@ -199,10 +199,6 @@ void __init plat_mem_setup(void) */ enable_dma(4); -#ifdef CONFIG_KGDB - kgdb_config(); -#endif - #ifdef CONFIG_DMA_COHERENT if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO) panic("Hardware DMA cache coherency not supported"); diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/nxp/pnx8550/common/Makefile index 31cc1a5cec3..dd9e7b1f7fd 100644 --- a/arch/mips/nxp/pnx8550/common/Makefile +++ b/arch/mips/nxp/pnx8550/common/Makefile @@ -24,6 +24,5 @@ obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_KGDB) += gdb_hook.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/nxp/pnx8550/common/gdb_hook.c b/arch/mips/nxp/pnx8550/common/gdb_hook.c deleted file mode 100644 index ad4624f6d9b..00000000000 --- a/arch/mips/nxp/pnx8550/common/gdb_hook.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * This is the interface to the remote debugger stub. - * - */ -#include -#include -#include -#include -#include - -#include -#include - -#include - -static struct serial_state rs_table[IP3106_NR_PORTS] = { -}; -static struct async_struct kdb_port_info = {0}; - -void rs_kgdb_hook(int tty_no) -{ - struct serial_state *ser = &rs_table[tty_no]; - - kdb_port_info.state = ser; - kdb_port_info.magic = SERIAL_MAGIC; - kdb_port_info.port = tty_no; - kdb_port_info.flags = ser->flags; - - /* - * Clear all interrupts - */ - /* Clear all the transmitter FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST; - /* Clear all the receiver FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST; - /* Clear all interrupts */ - ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX | - IP3106_UART_INT_ALLTX; - - /* - * Now, initialize the UART - */ - ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT; - ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud -} - -int putDebugChar(char c) -{ - /* Wait until FIFO not full */ - while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16) - ; - /* Send one char */ - ip3106_fifo(UART_BASE, kdb_port_info.port) = c; - - return 1; -} - -char getDebugChar(void) -{ - char ch; - - /* Wait until there is a char in the FIFO */ - while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) & - IP3106_UART_FIFO_RXFIFO) >> 8)) - ; - /* Read one char */ - ch = ip3106_fifo(UART_BASE, kdb_port_info.port) & - IP3106_UART_FIFO_RBRTHR; - /* Advance the RX FIFO read pointer */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT; - return (ch); -} - -void rs_disable_debug_interrupts(void) -{ - ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */ -} - -void rs_enable_debug_interrupts(void) -{ - /* Clear all the transmitter FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST; - /* Clear all the receiver FIFO counters (pointer and status) */ - ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST; - /* Clear all interrupts */ - ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX | - IP3106_UART_INT_ALLTX; - ip3106_ien(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */ -} diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c index aad03429a5e..f080f114a1b 100644 --- a/arch/mips/nxp/pnx8550/common/int.c +++ b/arch/mips/nxp/pnx8550/common/int.c @@ -34,7 +34,6 @@ #include #include -#include #include #include diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c index 18b125e3b65..acf1fa88944 100644 --- a/arch/mips/nxp/pnx8550/common/proc.c +++ b/arch/mips/nxp/pnx8550/common/proc.c @@ -22,7 +22,6 @@ #include #include -#include #include #include diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c index 92d764c9770..2aed50fef10 100644 --- a/arch/mips/nxp/pnx8550/common/setup.c +++ b/arch/mips/nxp/pnx8550/common/setup.c @@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void); extern void pnx8550_machine_power_off(void); extern struct resource ioport_resource; extern struct resource iomem_resource; -extern void rs_kgdb_hook(int tty_no); extern char *prom_getcmdline(void); struct resource standard_io_resources[] = { @@ -142,16 +141,5 @@ void __init plat_mem_setup(void) ip3106_baud(UART_BASE, pnx8550_console_port) = 5; } -#ifdef CONFIG_KGDB - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { - int line; - argptr += strlen("kgdb=ttyS"); - line = *argptr == '0' ? 0 : 1; - rs_kgdb_hook(line); - pr_info("KGDB: Using ttyS%i for session, " - "please connect your debugger\n", line ? 1 : 0); - } -#endif return; } diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c index 9de34302e5f..f7261628d8a 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c @@ -38,68 +38,6 @@ #include #include -#ifdef CONFIG_KGDB -/* - * kgdb uses serial port 1 so the console can remain on port 0. - * To use port 0 change the definition to read as follows: - * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE) - */ -#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE) - -int putDebugChar(char c) -{ - volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE; - uint32_t val = (uint32_t)c; - - local_irq_disable(); - while( !(uart[5] & 0x20) ); /* Wait for TXRDY */ - uart[0] = val; - while( !(uart[5] & 0x20) ); /* Wait for TXRDY */ - local_irq_enable(); - - return 1; -} - -char getDebugChar(void) -{ - volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE; - uint32_t val; - - while( !(uart[5] & 0x01) ); /* Wait for RXRDY */ - val = uart[0]; - - return (char)val; -} - -void initDebugPort(unsigned int uartclk, unsigned int baudrate) -{ - unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate); - - /* Enable FIFOs */ - writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4, - (char *)DEBUG_PORT_BASE + (UART_FCR * 4)); - - /* Select brtc divisor */ - writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4)); - - /* Store divisor lsb */ - writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4)); - - /* Store divisor msb */ - writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4)); - - /* Set 8N1 mode */ - writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4)); - - /* Disable flow control */ - writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4)); - - /* Disable receive interrupt(!) */ - writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4)); -} -#endif - void __init msp_serial_setup(void) { char *s; @@ -139,17 +77,6 @@ void __init msp_serial_setup(void) case MACH_MSP7120_FPGA: /* Enable UART1 on MSP4200 and MSP7120 */ *GPIO_CFG2_REG = 0x00002299; - -#ifdef CONFIG_KGDB - /* Initialize UART1 for kgdb since PMON doesn't */ - if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) { - if( mips_machtype == MACH_MSP4200_FPGA - || mips_machtype == MACH_MSP7120_FPGA ) - initDebugPort(uartclk, 19200); - else - initDebugPort(uartclk, 57600); - } -#endif break; default: diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile index 8fd9a04e353..b16f95c3df6 100644 --- a/arch/mips/pmc-sierra/yosemite/Makefile +++ b/arch/mips/pmc-sierra/yosemite/Makefile @@ -4,7 +4,6 @@ obj-y += irq.o prom.o py-console.o setup.o -obj-$(CONFIG_KGDB) += dbg_io.o obj-$(CONFIG_SMP) += smp.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/pmc-sierra/yosemite/dbg_io.c b/arch/mips/pmc-sierra/yosemite/dbg_io.c deleted file mode 100644 index 6362c702e38..00000000000 --- a/arch/mips/pmc-sierra/yosemite/dbg_io.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * Copyright 2003 PMC-Sierra - * Author: Manish Lachwani (lachwani@pmc-sierra.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* - * Support for KGDB for the Yosemite board. We make use of single serial - * port to be used for KGDB as well as console. The second serial port - * seems to be having a problem. Single IRQ is allocated for both the - * ports. Hence, the interrupt routing code needs to figure out whether - * the interrupt came from channel A or B. - */ - -#include - -/* - * Baud rate, Parity, Data and Stop bit settings for the - * serial port on the Yosemite. Note that the Early printk - * patch has been added. So, we should be all set to go - */ -#define YOSEMITE_BAUD_2400 2400 -#define YOSEMITE_BAUD_4800 4800 -#define YOSEMITE_BAUD_9600 9600 -#define YOSEMITE_BAUD_19200 19200 -#define YOSEMITE_BAUD_38400 38400 -#define YOSEMITE_BAUD_57600 57600 -#define YOSEMITE_BAUD_115200 115200 - -#define YOSEMITE_PARITY_NONE 0 -#define YOSEMITE_PARITY_ODD 0x08 -#define YOSEMITE_PARITY_EVEN 0x18 -#define YOSEMITE_PARITY_MARK 0x28 -#define YOSEMITE_PARITY_SPACE 0x38 - -#define YOSEMITE_DATA_5BIT 0x0 -#define YOSEMITE_DATA_6BIT 0x1 -#define YOSEMITE_DATA_7BIT 0x2 -#define YOSEMITE_DATA_8BIT 0x3 - -#define YOSEMITE_STOP_1BIT 0x0 -#define YOSEMITE_STOP_2BIT 0x4 - -/* This is crucial */ -#define SERIAL_REG_OFS 0x1 - -#define SERIAL_RCV_BUFFER 0x0 -#define SERIAL_TRANS_HOLD 0x0 -#define SERIAL_SEND_BUFFER 0x0 -#define SERIAL_INTR_ENABLE (1 * SERIAL_REG_OFS) -#define SERIAL_INTR_ID (2 * SERIAL_REG_OFS) -#define SERIAL_DATA_FORMAT (3 * SERIAL_REG_OFS) -#define SERIAL_LINE_CONTROL (3 * SERIAL_REG_OFS) -#define SERIAL_MODEM_CONTROL (4 * SERIAL_REG_OFS) -#define SERIAL_RS232_OUTPUT (4 * SERIAL_REG_OFS) -#define SERIAL_LINE_STATUS (5 * SERIAL_REG_OFS) -#define SERIAL_MODEM_STATUS (6 * SERIAL_REG_OFS) -#define SERIAL_RS232_INPUT (6 * SERIAL_REG_OFS) -#define SERIAL_SCRATCH_PAD (7 * SERIAL_REG_OFS) - -#define SERIAL_DIVISOR_LSB (0 * SERIAL_REG_OFS) -#define SERIAL_DIVISOR_MSB (1 * SERIAL_REG_OFS) - -/* - * Functions to READ and WRITE to serial port 0 - */ -#define SERIAL_READ(ofs) (*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE + ofs))) - -#define SERIAL_WRITE(ofs, val) ((*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE + ofs))) = val) - -/* - * Functions to READ and WRITE to serial port 1 - */ -#define SERIAL_READ_1(ofs) (*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE_1 + ofs))) - -#define SERIAL_WRITE_1(ofs, val) ((*((volatile unsigned char*) \ - (TITAN_SERIAL_BASE_1 + ofs))) = val) - -/* - * Second serial port initialization - */ -void init_second_port(void) -{ - /* Disable Interrupts */ - SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0); - SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0); - - { - unsigned int divisor; - - SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80); - divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200; - SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff); - - SERIAL_WRITE_1(SERIAL_DIVISOR_MSB, - (divisor & 0xff00) >> 8); - SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0); - } - - SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT | - YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT); - - /* Enable Interrupts */ - SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf); -} - -/* Initialize the serial port for KGDB debugging */ -void debugInit(unsigned int baud, unsigned char data, unsigned char parity, - unsigned char stop) -{ - /* Disable Interrupts */ - SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0); - SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0); - - { - unsigned int divisor; - - SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80); - - divisor = TITAN_SERIAL_BASE_BAUD / baud; - SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff); - - SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8); - SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0); - } - - SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop); -} - -static int remoteDebugInitialized = 0; - -unsigned char getDebugChar(void) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(YOSEMITE_BAUD_115200, - YOSEMITE_DATA_8BIT, - YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT); - } - - while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0); - return SERIAL_READ(SERIAL_RCV_BUFFER); -} - -int putDebugChar(unsigned char byte) -{ - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(YOSEMITE_BAUD_115200, - YOSEMITE_DATA_8BIT, - YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT); - } - - while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0); - SERIAL_WRITE(SERIAL_SEND_BUFFER, byte); - - return 1; -} diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c index 4decc280786..5f673eba142 100644 --- a/arch/mips/pmc-sierra/yosemite/irq.c +++ b/arch/mips/pmc-sierra/yosemite/irq.c @@ -141,10 +141,6 @@ asmlinkage void plat_irq_dispatch(void) } } -#ifdef CONFIG_KGDB -extern void init_second_port(void); -#endif - /* * Initialize the next level interrupt handler */ @@ -156,11 +152,6 @@ void __init arch_init_irq(void) rm7k_cpu_irq_init(); rm9k_cpu_irq_init(); -#ifdef CONFIG_KGDB - /* At this point, initialize the second serial port */ - init_second_port(); -#endif - #ifdef CONFIG_GDB_CONSOLE register_gdb_console(); #endif diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c index 5f389ee26fc..896a1ef8482 100644 --- a/arch/mips/sgi-ip22/ip22-setup.c +++ b/arch/mips/sgi-ip22/ip22-setup.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -81,30 +80,6 @@ void __init plat_mem_setup(void) add_preferred_console("arc", 0, NULL); } -#ifdef CONFIG_KGDB - { - char *kgdb_ttyd = prom_getcmdline(); - - if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) { - int line; - kgdb_ttyd += strlen("kgdb=ttyd"); - if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2') - printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c" - ", falling back to /dev/ttyd1\n", *kgdb_ttyd); - line = *kgdb_ttyd == '2' ? 0 : 1; - printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for " - "session\n", line ? 1 : 2); - rs_kgdb_hook(line); - - printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for " - "session, please connect your debugger\n", line ? 1:2); - - kgdb_enabled = 1; - /* Breakpoints and stuff are in sgi_irq_setup() */ - } - } -#endif - #if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE) { ULONG *gfxinfo; diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile index e0a6871d56e..31f4931b848 100644 --- a/arch/mips/sgi-ip27/Makefile +++ b/arch/mips/sgi-ip27/Makefile @@ -7,7 +7,6 @@ obj-y := ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \ ip27-xtalk.o obj-$(CONFIG_EARLY_PRINTK) += ip27-console.o -obj-$(CONFIG_KGDB) += ip27-dbgio.o obj-$(CONFIG_SMP) += ip27-smp.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/sgi-ip27/ip27-dbgio.c b/arch/mips/sgi-ip27/ip27-dbgio.c deleted file mode 100644 index 08fd88b36f8..00000000000 --- a/arch/mips/sgi-ip27/ip27-dbgio.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Copyright 2004 Ralf Baechle - */ -#include -#include -#include -#include -#include - -#include -#include -#include - -#define IOC3_CLK (22000000 / 3) -#define IOC3_FLAGS (0) - -static inline struct ioc3_uartregs *console_uart(void) -{ - struct ioc3 *ioc3; - - ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base; - - return &ioc3->sregs.uarta; -} - -unsigned char getDebugChar(void) -{ - struct ioc3_uartregs *uart = console_uart(); - - while ((uart->iu_lsr & UART_LSR_DR) == 0); - return uart->iu_rbr; -} - -void putDebugChar(unsigned char c) -{ - struct ioc3_uartregs *uart = console_uart(); - - while ((uart->iu_lsr & UART_LSR_THRE) == 0); - uart->iu_thr = c; -} diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index db372a0f106..a35818ed426 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -57,30 +57,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask); extern unsigned long ht_eoi_space; #endif -#ifdef CONFIG_KGDB -#include -extern void breakpoint(void); -static int kgdb_irq; -#ifdef CONFIG_GDB_CONSOLE -extern void register_gdb_console(void); -#endif - -/* kgdb is on when configured. Pass "nokgdb" kernel arg to turn it off */ -static int kgdb_flag = 1; -static int __init nokgdb(char *str) -{ - kgdb_flag = 0; - return 1; -} -__setup("nokgdb", nokgdb); - -/* Default to UART1 */ -int kgdb_port = 1; -#ifdef CONFIG_SERIAL_SB1250_DUART -extern char sb1250_duart_present[]; -#endif -#endif - static struct irq_chip bcm1480_irq_type = { .name = "BCM1480-IMR", .ack = ack_bcm1480_irq, @@ -355,61 +331,10 @@ void __init arch_init_irq(void) * does its own management of IP7. */ -#ifdef CONFIG_KGDB - imask |= STATUSF_IP6; -#endif /* Enable necessary IPs, disable the rest */ change_c0_status(ST0_IM, imask); - -#ifdef CONFIG_KGDB - if (kgdb_flag) { - kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port; - -#ifdef CONFIG_SERIAL_SB1250_DUART - sb1250_duart_present[kgdb_port] = 0; -#endif - /* Setup uart 1 settings, mapper */ - /* QQQ FIXME */ - __raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port))); - - __raw_writeq(IMR_IP6_VAL, - IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + - (kgdb_irq << 3))); - bcm1480_unmask_irq(0, kgdb_irq); - -#ifdef CONFIG_GDB_CONSOLE - register_gdb_console(); -#endif - printk("Waiting for GDB on UART port %d\n", kgdb_port); - set_debug_traps(); - breakpoint(); - } -#endif -} - -#ifdef CONFIG_KGDB - -#include - -#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg))) -#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg))) - -static void bcm1480_kgdb_interrupt(void) -{ - /* - * Clear break-change status (allow some time for the remote - * host to stop the break, since we would see another - * interrupt on the end-of-break too) - */ - kstat.irqs[smp_processor_id()][kgdb_irq]++; - mdelay(500); - duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT | - M_DUART_RX_EN | M_DUART_TX_EN); - set_async_breakpoint(&get_irq_regs()->cp0_epc); } -#endif /* CONFIG_KGDB */ - extern void bcm1480_mailbox_interrupt(void); static inline void dispatch_ip2(void) @@ -462,11 +387,6 @@ asmlinkage void plat_irq_dispatch(void) bcm1480_mailbox_interrupt(); #endif -#ifdef CONFIG_KGDB - else if (pending & CAUSEF_IP6) - bcm1480_kgdb_interrupt(); /* KGDB (uart 1) */ -#endif - else if (pending & CAUSEF_IP2) dispatch_ip2(); } diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c index fd9604d5555..3de30f79db3 100644 --- a/arch/mips/sibyte/cfe/setup.c +++ b/arch/mips/sibyte/cfe/setup.c @@ -59,10 +59,6 @@ int cfe_cons_handle; extern unsigned long initrd_start, initrd_end; #endif -#ifdef CONFIG_KGDB -extern int kgdb_port; -#endif - static void __noreturn cfe_linux_exit(void *arg) { int warm = *(int *)arg; @@ -246,9 +242,6 @@ void __init prom_init(void) int argc = fw_arg0; char **envp = (char **) fw_arg2; int *prom_vec = (int *) fw_arg3; -#ifdef CONFIG_KGDB - char *arg; -#endif _machine_restart = cfe_linux_restart; _machine_halt = cfe_linux_halt; @@ -309,13 +302,6 @@ void __init prom_init(void) } } -#ifdef CONFIG_KGDB - if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL) - kgdb_port = (arg[10] == '0') ? 0 : 1; - else - kgdb_port = 1; -#endif - #ifdef CONFIG_BLK_DEV_INITRD { char *ptr; diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index eac9065ffe0..a5158483986 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -57,16 +57,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask); extern unsigned long ldt_eoi_space; #endif -#ifdef CONFIG_KGDB -static int kgdb_irq; - -/* Default to UART1 */ -int kgdb_port = 1; -#ifdef CONFIG_SERIAL_SB1250_DUART -extern char sb1250_duart_present[]; -#endif -#endif - static struct irq_chip sb1250_irq_type = { .name = "SB1250-IMR", .ack = ack_sb1250_irq, @@ -313,55 +303,10 @@ void __init arch_init_irq(void) * does its own management of IP7. */ -#ifdef CONFIG_KGDB - imask |= STATUSF_IP6; -#endif /* Enable necessary IPs, disable the rest */ change_c0_status(ST0_IM, imask); - -#ifdef CONFIG_KGDB - if (kgdb_flag) { - kgdb_irq = K_INT_UART_0 + kgdb_port; - -#ifdef CONFIG_SERIAL_SB1250_DUART - sb1250_duart_present[kgdb_port] = 0; -#endif - /* Setup uart 1 settings, mapper */ - __raw_writeq(M_DUART_IMR_BRK, - IOADDR(A_DUART_IMRREG(kgdb_port))); - - __raw_writeq(IMR_IP6_VAL, - IOADDR(A_IMR_REGISTER(0, - R_IMR_INTERRUPT_MAP_BASE) + - (kgdb_irq << 3))); - sb1250_unmask_irq(0, kgdb_irq); - } -#endif -} - -#ifdef CONFIG_KGDB - -#include - -#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg))) -#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg))) - -static void sb1250_kgdb_interrupt(void) -{ - /* - * Clear break-change status (allow some time for the remote - * host to stop the break, since we would see another - * interrupt on the end-of-break too) - */ - kstat_this_cpu.irqs[kgdb_irq]++; - mdelay(500); - duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT | - M_DUART_RX_EN | M_DUART_TX_EN); - set_async_breakpoint(&get_irq_regs()->cp0_epc); } -#endif /* CONFIG_KGDB */ - extern void sb1250_mailbox_interrupt(void); static inline void dispatch_ip2(void) @@ -407,11 +352,6 @@ asmlinkage void plat_irq_dispatch(void) sb1250_mailbox_interrupt(); #endif -#ifdef CONFIG_KGDB - else if (pending & CAUSEF_IP6) /* KGDB (uart 1) */ - sb1250_kgdb_interrupt(); -#endif - else if (pending & CAUSEF_IP2) dispatch_ip2(); else diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile index 255d692bfa1..f18ba9201bb 100644 --- a/arch/mips/sibyte/swarm/Makefile +++ b/arch/mips/sibyte/swarm/Makefile @@ -1,4 +1,3 @@ obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o -obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c deleted file mode 100644 index b97ae304848..00000000000 --- a/arch/mips/sibyte/swarm/dbg_io.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * kgdb debug routines for SiByte boards. - * - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -/* -------------------- BEGINNING OF CONFIG --------------------- */ - -#include -#include -#include -#include -#include -#include -#include - -/* - * We use the second serial port for kgdb traffic. - * 115200, 8, N, 1. - */ - -#define BAUD_RATE 115200 -#define CLK_DIVISOR V_DUART_BAUD_RATE(BAUD_RATE) -#define DATA_BITS V_DUART_BITS_PER_CHAR_8 /* or 7 */ -#define PARITY V_DUART_PARITY_MODE_NONE /* or even */ -#define STOP_BITS M_DUART_STOP_BIT_LEN_1 /* or 2 */ - -static int duart_initialized = 0; /* 0: need to be init'ed by kgdb */ - -/* -------------------- END OF CONFIG --------------------- */ -extern int kgdb_port; - -#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg))) -#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg))) - -void putDebugChar(unsigned char c); -unsigned char getDebugChar(void); -static void -duart_init(int clk_divisor, int data, int parity, int stop) -{ - duart_out(R_DUART_MODE_REG_1, data | parity); - duart_out(R_DUART_MODE_REG_2, stop); - duart_out(R_DUART_CLK_SEL, clk_divisor); - - duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN); /* enable rx and tx */ -} - -void -putDebugChar(unsigned char c) -{ - if (!duart_initialized) { - duart_initialized = 1; - duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS); - } - while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0); - duart_out(R_DUART_TX_HOLD, c); -} - -unsigned char -getDebugChar(void) -{ - if (!duart_initialized) { - duart_initialized = 1; - duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS); - } - while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ; - return duart_in(R_DUART_RX_HOLD); -} - diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index d1dd1195036..840fe757c48 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -60,7 +60,6 @@ config SOC_TX4927 select HW_HAS_PCI select IRQ_TXX9 select PCI_TX4927 - select SYS_SUPPORTS_KGDB select GPIO_TXX9 config SOC_TX4938 @@ -70,7 +69,6 @@ config SOC_TX4938 select HW_HAS_PCI select IRQ_TXX9 select PCI_TX4927 - select SYS_SUPPORTS_KGDB select GPIO_TXX9 config TOSHIBA_FPCIB0 diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index 57ed07bf030..9bb34af26b7 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -8,6 +8,5 @@ obj-$(CONFIG_SOC_TX3927) += setup_tx3927.o irq_tx3927.o obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o setup_tx4927.o irq_tx4927.o obj-$(CONFIG_SOC_TX4938) += mem_tx4927.o setup_tx4938.o irq_tx4938.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o -obj-$(CONFIG_KGDB) += dbgio.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/generic/dbgio.c b/arch/mips/txx9/generic/dbgio.c deleted file mode 100644 index 33b9c672a32..00000000000 --- a/arch/mips/txx9/generic/dbgio.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/dbgio.c - * - * kgdb interface for gdb - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Support for TX4938 in 2.6 - Hiroshi DOYU - */ - -#include - -extern u8 txx9_sio_kdbg_rd(void); -extern int txx9_sio_kdbg_wr( u8 ch ); - -u8 getDebugChar(void) -{ - return (txx9_sio_kdbg_rd()); -} - -int putDebugChar(u8 byte) -{ - return (txx9_sio_kdbg_wr(byte)); -} - diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile index ba292c94566..20d61ac543e 100644 --- a/arch/mips/txx9/jmr3927/Makefile +++ b/arch/mips/txx9/jmr3927/Makefile @@ -3,6 +3,5 @@ # obj-y += prom.o irq.o setup.o -obj-$(CONFIG_KGDB) += kgdb_io.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/jmr3927/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c deleted file mode 100644 index 5bd757e56f7..00000000000 --- a/arch/mips/txx9/jmr3927/kgdb_io.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Low level uart routines to directly access a TX[34]927 SIO. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com or source@mvista.com - * - * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#define TIMEOUT 0xffffff - -static int remoteDebugInitialized = 0; -static void debugInit(int baud); - -int putDebugChar(unsigned char c) -{ - int i = 0; - - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(38400); - } - - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS)); - tx3927_sioptr(0)->tfifo = c; - - return 1; -} - -unsigned char getDebugChar(void) -{ - int i = 0; - int dicr; - char c; - - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(38400); - } - - /* diable RX int. */ - dicr = tx3927_sioptr(0)->dicr; - tx3927_sioptr(0)->dicr = 0; - - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID) - ; - c = tx3927_sioptr(0)->rfifo; - - /* clear RX int. status */ - tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS; - /* enable RX int. */ - tx3927_sioptr(0)->dicr = dicr; - - return c; -} - -static void debugInit(int baud) -{ - tx3927_sioptr(0)->lcr = 0x020; - tx3927_sioptr(0)->dicr = 0; - tx3927_sioptr(0)->disr = 0x4100; - tx3927_sioptr(0)->cisr = 0x014; - tx3927_sioptr(0)->fcr = 0; - tx3927_sioptr(0)->flcr = 0x02; - tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) | - TXx927_SIBGR_BCLK_T0; -} diff --git a/include/asm-mips/gdb-stub.h b/include/asm-mips/gdb-stub.h deleted file mode 100644 index 22f67d4a71a..00000000000 --- a/include/asm-mips/gdb-stub.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 Andreas Busse - * Copyright (C) 2003 Ralf Baechle - */ -#ifndef _ASM_GDB_STUB_H -#define _ASM_GDB_STUB_H - - -/* - * important register numbers - */ - -#define REG_EPC 37 -#define REG_FP 72 -#define REG_SP 29 - -/* - * Stack layout for the GDB exception handler - * Derived from the stack layout described in asm-mips/stackframe.h - * - * The first PTRSIZE*6 bytes are argument save space for C subroutines. - */ -#define NUMREGS 90 - -#define GDB_FR_REG0 (PTRSIZE*6) /* 0 */ -#define GDB_FR_REG1 ((GDB_FR_REG0) + LONGSIZE) /* 1 */ -#define GDB_FR_REG2 ((GDB_FR_REG1) + LONGSIZE) /* 2 */ -#define GDB_FR_REG3 ((GDB_FR_REG2) + LONGSIZE) /* 3 */ -#define GDB_FR_REG4 ((GDB_FR_REG3) + LONGSIZE) /* 4 */ -#define GDB_FR_REG5 ((GDB_FR_REG4) + LONGSIZE) /* 5 */ -#define GDB_FR_REG6 ((GDB_FR_REG5) + LONGSIZE) /* 6 */ -#define GDB_FR_REG7 ((GDB_FR_REG6) + LONGSIZE) /* 7 */ -#define GDB_FR_REG8 ((GDB_FR_REG7) + LONGSIZE) /* 8 */ -#define GDB_FR_REG9 ((GDB_FR_REG8) + LONGSIZE) /* 9 */ -#define GDB_FR_REG10 ((GDB_FR_REG9) + LONGSIZE) /* 10 */ -#define GDB_FR_REG11 ((GDB_FR_REG10) + LONGSIZE) /* 11 */ -#define GDB_FR_REG12 ((GDB_FR_REG11) + LONGSIZE) /* 12 */ -#define GDB_FR_REG13 ((GDB_FR_REG12) + LONGSIZE) /* 13 */ -#define GDB_FR_REG14 ((GDB_FR_REG13) + LONGSIZE) /* 14 */ -#define GDB_FR_REG15 ((GDB_FR_REG14) + LONGSIZE) /* 15 */ -#define GDB_FR_REG16 ((GDB_FR_REG15) + LONGSIZE) /* 16 */ -#define GDB_FR_REG17 ((GDB_FR_REG16) + LONGSIZE) /* 17 */ -#define GDB_FR_REG18 ((GDB_FR_REG17) + LONGSIZE) /* 18 */ -#define GDB_FR_REG19 ((GDB_FR_REG18) + LONGSIZE) /* 19 */ -#define GDB_FR_REG20 ((GDB_FR_REG19) + LONGSIZE) /* 20 */ -#define GDB_FR_REG21 ((GDB_FR_REG20) + LONGSIZE) /* 21 */ -#define GDB_FR_REG22 ((GDB_FR_REG21) + LONGSIZE) /* 22 */ -#define GDB_FR_REG23 ((GDB_FR_REG22) + LONGSIZE) /* 23 */ -#define GDB_FR_REG24 ((GDB_FR_REG23) + LONGSIZE) /* 24 */ -#define GDB_FR_REG25 ((GDB_FR_REG24) + LONGSIZE) /* 25 */ -#define GDB_FR_REG26 ((GDB_FR_REG25) + LONGSIZE) /* 26 */ -#define GDB_FR_REG27 ((GDB_FR_REG26) + LONGSIZE) /* 27 */ -#define GDB_FR_REG28 ((GDB_FR_REG27) + LONGSIZE) /* 28 */ -#define GDB_FR_REG29 ((GDB_FR_REG28) + LONGSIZE) /* 29 */ -#define GDB_FR_REG30 ((GDB_FR_REG29) + LONGSIZE) /* 30 */ -#define GDB_FR_REG31 ((GDB_FR_REG30) + LONGSIZE) /* 31 */ - -/* - * Saved special registers - */ -#define GDB_FR_STATUS ((GDB_FR_REG31) + LONGSIZE) /* 32 */ -#define GDB_FR_LO ((GDB_FR_STATUS) + LONGSIZE) /* 33 */ -#define GDB_FR_HI ((GDB_FR_LO) + LONGSIZE) /* 34 */ -#define GDB_FR_BADVADDR ((GDB_FR_HI) + LONGSIZE) /* 35 */ -#define GDB_FR_CAUSE ((GDB_FR_BADVADDR) + LONGSIZE) /* 36 */ -#define GDB_FR_EPC ((GDB_FR_CAUSE) + LONGSIZE) /* 37 */ - -/* - * Saved floating point registers - */ -#define GDB_FR_FPR0 ((GDB_FR_EPC) + LONGSIZE) /* 38 */ -#define GDB_FR_FPR1 ((GDB_FR_FPR0) + LONGSIZE) /* 39 */ -#define GDB_FR_FPR2 ((GDB_FR_FPR1) + LONGSIZE) /* 40 */ -#define GDB_FR_FPR3 ((GDB_FR_FPR2) + LONGSIZE) /* 41 */ -#define GDB_FR_FPR4 ((GDB_FR_FPR3) + LONGSIZE) /* 42 */ -#define GDB_FR_FPR5 ((GDB_FR_FPR4) + LONGSIZE) /* 43 */ -#define GDB_FR_FPR6 ((GDB_FR_FPR5) + LONGSIZE) /* 44 */ -#define GDB_FR_FPR7 ((GDB_FR_FPR6) + LONGSIZE) /* 45 */ -#define GDB_FR_FPR8 ((GDB_FR_FPR7) + LONGSIZE) /* 46 */ -#define GDB_FR_FPR9 ((GDB_FR_FPR8) + LONGSIZE) /* 47 */ -#define GDB_FR_FPR10 ((GDB_FR_FPR9) + LONGSIZE) /* 48 */ -#define GDB_FR_FPR11 ((GDB_FR_FPR10) + LONGSIZE) /* 49 */ -#define GDB_FR_FPR12 ((GDB_FR_FPR11) + LONGSIZE) /* 50 */ -#define GDB_FR_FPR13 ((GDB_FR_FPR12) + LONGSIZE) /* 51 */ -#define GDB_FR_FPR14 ((GDB_FR_FPR13) + LONGSIZE) /* 52 */ -#define GDB_FR_FPR15 ((GDB_FR_FPR14) + LONGSIZE) /* 53 */ -#define GDB_FR_FPR16 ((GDB_FR_FPR15) + LONGSIZE) /* 54 */ -#define GDB_FR_FPR17 ((GDB_FR_FPR16) + LONGSIZE) /* 55 */ -#define GDB_FR_FPR18 ((GDB_FR_FPR17) + LONGSIZE) /* 56 */ -#define GDB_FR_FPR19 ((GDB_FR_FPR18) + LONGSIZE) /* 57 */ -#define GDB_FR_FPR20 ((GDB_FR_FPR19) + LONGSIZE) /* 58 */ -#define GDB_FR_FPR21 ((GDB_FR_FPR20) + LONGSIZE) /* 59 */ -#define GDB_FR_FPR22 ((GDB_FR_FPR21) + LONGSIZE) /* 60 */ -#define GDB_FR_FPR23 ((GDB_FR_FPR22) + LONGSIZE) /* 61 */ -#define GDB_FR_FPR24 ((GDB_FR_FPR23) + LONGSIZE) /* 62 */ -#define GDB_FR_FPR25 ((GDB_FR_FPR24) + LONGSIZE) /* 63 */ -#define GDB_FR_FPR26 ((GDB_FR_FPR25) + LONGSIZE) /* 64 */ -#define GDB_FR_FPR27 ((GDB_FR_FPR26) + LONGSIZE) /* 65 */ -#define GDB_FR_FPR28 ((GDB_FR_FPR27) + LONGSIZE) /* 66 */ -#define GDB_FR_FPR29 ((GDB_FR_FPR28) + LONGSIZE) /* 67 */ -#define GDB_FR_FPR30 ((GDB_FR_FPR29) + LONGSIZE) /* 68 */ -#define GDB_FR_FPR31 ((GDB_FR_FPR30) + LONGSIZE) /* 69 */ - -#define GDB_FR_FSR ((GDB_FR_FPR31) + LONGSIZE) /* 70 */ -#define GDB_FR_FIR ((GDB_FR_FSR) + LONGSIZE) /* 71 */ -#define GDB_FR_FRP ((GDB_FR_FIR) + LONGSIZE) /* 72 */ - -#define GDB_FR_DUMMY ((GDB_FR_FRP) + LONGSIZE) /* 73, unused ??? */ - -/* - * Again, CP0 registers - */ -#define GDB_FR_CP0_INDEX ((GDB_FR_DUMMY) + LONGSIZE) /* 74 */ -#define GDB_FR_CP0_RANDOM ((GDB_FR_CP0_INDEX) + LONGSIZE) /* 75 */ -#define GDB_FR_CP0_ENTRYLO0 ((GDB_FR_CP0_RANDOM) + LONGSIZE)/* 76 */ -#define GDB_FR_CP0_ENTRYLO1 ((GDB_FR_CP0_ENTRYLO0) + LONGSIZE)/* 77 */ -#define GDB_FR_CP0_CONTEXT ((GDB_FR_CP0_ENTRYLO1) + LONGSIZE)/* 78 */ -#define GDB_FR_CP0_PAGEMASK ((GDB_FR_CP0_CONTEXT) + LONGSIZE)/* 79 */ -#define GDB_FR_CP0_WIRED ((GDB_FR_CP0_PAGEMASK) + LONGSIZE)/* 80 */ -#define GDB_FR_CP0_REG7 ((GDB_FR_CP0_WIRED) + LONGSIZE) /* 81 */ -#define GDB_FR_CP0_REG8 ((GDB_FR_CP0_REG7) + LONGSIZE) /* 82 */ -#define GDB_FR_CP0_REG9 ((GDB_FR_CP0_REG8) + LONGSIZE) /* 83 */ -#define GDB_FR_CP0_ENTRYHI ((GDB_FR_CP0_REG9) + LONGSIZE) /* 84 */ -#define GDB_FR_CP0_REG11 ((GDB_FR_CP0_ENTRYHI) + LONGSIZE)/* 85 */ -#define GDB_FR_CP0_REG12 ((GDB_FR_CP0_REG11) + LONGSIZE) /* 86 */ -#define GDB_FR_CP0_REG13 ((GDB_FR_CP0_REG12) + LONGSIZE) /* 87 */ -#define GDB_FR_CP0_REG14 ((GDB_FR_CP0_REG13) + LONGSIZE) /* 88 */ -#define GDB_FR_CP0_PRID ((GDB_FR_CP0_REG14) + LONGSIZE) /* 89 */ - -#define GDB_FR_SIZE ((((GDB_FR_CP0_PRID) + LONGSIZE) + (PTRSIZE-1)) & ~(PTRSIZE-1)) - -#ifndef __ASSEMBLY__ - -/* - * This is the same as above, but for the high-level - * part of the GDB stub. - */ - -struct gdb_regs { - /* - * Pad bytes for argument save space on the stack - * 24/48 Bytes for 32/64 bit code - */ - unsigned long pad0[6]; - - /* - * saved main processor registers - */ - long reg0, reg1, reg2, reg3, reg4, reg5, reg6, reg7; - long reg8, reg9, reg10, reg11, reg12, reg13, reg14, reg15; - long reg16, reg17, reg18, reg19, reg20, reg21, reg22, reg23; - long reg24, reg25, reg26, reg27, reg28, reg29, reg30, reg31; - - /* - * Saved special registers - */ - long cp0_status; - long lo; - long hi; - long cp0_badvaddr; - long cp0_cause; - long cp0_epc; - - /* - * Saved floating point registers - */ - long fpr0, fpr1, fpr2, fpr3, fpr4, fpr5, fpr6, fpr7; - long fpr8, fpr9, fpr10, fpr11, fpr12, fpr13, fpr14, fpr15; - long fpr16, fpr17, fpr18, fpr19, fpr20, fpr21, fpr22, fpr23; - long fpr24, fpr25, fpr26, fpr27, fpr28, fpr29, fpr30, fpr31; - - long cp1_fsr; - long cp1_fir; - - /* - * Frame pointer - */ - long frame_ptr; - long dummy; /* unused */ - - /* - * saved cp0 registers - */ - long cp0_index; - long cp0_random; - long cp0_entrylo0; - long cp0_entrylo1; - long cp0_context; - long cp0_pagemask; - long cp0_wired; - long cp0_reg7; - long cp0_reg8; - long cp0_reg9; - long cp0_entryhi; - long cp0_reg11; - long cp0_reg12; - long cp0_reg13; - long cp0_reg14; - long cp0_prid; -}; - -/* - * Prototypes - */ - -extern int kgdb_enabled; -void set_debug_traps(void); -void set_async_breakpoint(unsigned long *epc); - -#endif /* !__ASSEMBLY__ */ -#endif /* _ASM_GDB_STUB_H */ -- GitLab From 8854700115ecf8aa6f087aa915b7b6cf18090d39 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Tue, 29 Jul 2008 15:58:53 -0500 Subject: [PATCH 0440/1024] [MIPS] kgdb: add arch support for the kernel's kgdb core The new kgdb architecture specific handler registers and unregisters dynamically for exceptions depending on when you configure a kgdb I/O driver. Aside from initializing the exceptions earlier in the boot process, kgdb should have no impact on a device when it is compiled in so long as an I/O module is not configured for use. There have been quite a number of contributors during the existence of this patch (see arch/mips/kernel/kgdb.c). Most recently Jason re-wrote the mips kgdb logic to use the die notification handlers. Signed-off-by: Jason Wessel Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + arch/mips/kernel/Makefile | 1 + arch/mips/kernel/irq.c | 15 ++ arch/mips/kernel/kgdb.c | 281 ++++++++++++++++++++++++++++++++++++++ arch/mips/kernel/traps.c | 21 +++ include/asm-mips/kdebug.h | 14 +- include/asm-mips/kgdb.h | 44 ++++++ 7 files changed, 376 insertions(+), 1 deletion(-) create mode 100644 arch/mips/kernel/kgdb.c create mode 100644 include/asm-mips/kgdb.h diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 34b13f1d8a0..4da736e2533 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -3,6 +3,7 @@ config MIPS default y select HAVE_IDE select HAVE_OPROFILE + select HAVE_ARCH_KGDB # Horrible source of confusion. Die, die, die ... select EMBEDDED select RTC_LIB diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 73ff048eaa5..706f9397479 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -71,6 +71,7 @@ obj-$(CONFIG_MIPS32_COMPAT) += linux32.o ptrace32.o signal32.o obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o +obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_64BIT) += cpu-bugs64.o diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index 8acba0880d9..4b4007b3083 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -21,11 +21,16 @@ #include #include #include +#include #include #include #include +#ifdef CONFIG_KGDB +int kgdb_early_setup; +#endif + static unsigned long irq_map[NR_IRQS / BITS_PER_LONG]; int allocate_irqno(void) @@ -130,8 +135,18 @@ void __init init_IRQ(void) { int i; +#ifdef CONFIG_KGDB + if (kgdb_early_setup) + return; +#endif + for (i = 0; i < NR_IRQS; i++) set_irq_noprobe(i); arch_init_irq(); + +#ifdef CONFIG_KGDB + if (!kgdb_early_setup) + kgdb_early_setup = 1; +#endif } diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c new file mode 100644 index 00000000000..c5a8b2d21ca --- /dev/null +++ b/arch/mips/kernel/kgdb.c @@ -0,0 +1,281 @@ +/* + * Originally written by Glenn Engel, Lake Stevens Instrument Division + * + * Contributed by HP Systems + * + * Modified for Linux/MIPS (and MIPS in general) by Andreas Busse + * Send complaints, suggestions etc. to + * + * Copyright (C) 1995 Andreas Busse + * + * Copyright (C) 2003 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * Copyright (C) 2004-2005 MontaVista Software Inc. + * Author: Manish Lachwani, mlachwani@mvista.com or manish@koffee-break.com + * + * Copyright (C) 2007-2008 Wind River Systems, Inc. + * Author/Maintainer: Jason Wessel, jason.wessel@windriver.com + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include /* for linux pt_regs struct */ +#include +#include +#include +#include +#include +#include +#include +#include + +static struct hard_trap_info { + unsigned char tt; /* Trap type code for MIPS R3xxx and R4xxx */ + unsigned char signo; /* Signal that we map this trap into */ +} hard_trap_info[] = { + { 6, SIGBUS }, /* instruction bus error */ + { 7, SIGBUS }, /* data bus error */ + { 9, SIGTRAP }, /* break */ +/* { 11, SIGILL }, */ /* CPU unusable */ + { 12, SIGFPE }, /* overflow */ + { 13, SIGTRAP }, /* trap */ + { 14, SIGSEGV }, /* virtual instruction cache coherency */ + { 15, SIGFPE }, /* floating point exception */ + { 23, SIGSEGV }, /* watch */ + { 31, SIGSEGV }, /* virtual data cache coherency */ + { 0, 0} /* Must be last */ +}; + +void arch_kgdb_breakpoint(void) +{ + __asm__ __volatile__( + ".globl breakinst\n\t" + ".set\tnoreorder\n\t" + "nop\n" + "breakinst:\tbreak\n\t" + "nop\n\t" + ".set\treorder"); +} + +static void kgdb_call_nmi_hook(void *ignored) +{ + kgdb_nmicallback(raw_smp_processor_id(), (void *)0); +} + +void kgdb_roundup_cpus(unsigned long flags) +{ + local_irq_enable(); + smp_call_function(kgdb_call_nmi_hook, NULL, NULL); + local_irq_disable(); +} + +static int compute_signal(int tt) +{ + struct hard_trap_info *ht; + + for (ht = hard_trap_info; ht->tt && ht->signo; ht++) + if (ht->tt == tt) + return ht->signo; + + return SIGHUP; /* default for things we don't know about */ +} + +void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + int reg; + +#if (KGDB_GDB_REG_SIZE == 32) + u32 *ptr = (u32 *)gdb_regs; +#else + u64 *ptr = (u64 *)gdb_regs; +#endif + + for (reg = 0; reg < 32; reg++) + *(ptr++) = regs->regs[reg]; + + *(ptr++) = regs->cp0_status; + *(ptr++) = regs->lo; + *(ptr++) = regs->hi; + *(ptr++) = regs->cp0_badvaddr; + *(ptr++) = regs->cp0_cause; + *(ptr++) = regs->cp0_epc; + + /* FP REGS */ + if (!(current && (regs->cp0_status & ST0_CU1))) + return; + + save_fp(current); + for (reg = 0; reg < 32; reg++) + *(ptr++) = current->thread.fpu.fpr[reg]; +} + +void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) +{ + int reg; + +#if (KGDB_GDB_REG_SIZE == 32) + const u32 *ptr = (u32 *)gdb_regs; +#else + const u64 *ptr = (u64 *)gdb_regs; +#endif + + for (reg = 0; reg < 32; reg++) + regs->regs[reg] = *(ptr++); + + regs->cp0_status = *(ptr++); + regs->lo = *(ptr++); + regs->hi = *(ptr++); + regs->cp0_badvaddr = *(ptr++); + regs->cp0_cause = *(ptr++); + regs->cp0_epc = *(ptr++); + + /* FP REGS from current */ + if (!(current && (regs->cp0_status & ST0_CU1))) + return; + + for (reg = 0; reg < 32; reg++) + current->thread.fpu.fpr[reg] = *(ptr++); + restore_fp(current); +} + +/* + * Similar to regs_to_gdb_regs() except that process is sleeping and so + * we may not be able to get all the info. + */ +void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p) +{ + int reg; + struct thread_info *ti = task_thread_info(p); + unsigned long ksp = (unsigned long)ti + THREAD_SIZE - 32; + struct pt_regs *regs = (struct pt_regs *)ksp - 1; +#if (KGDB_GDB_REG_SIZE == 32) + u32 *ptr = (u32 *)gdb_regs; +#else + u64 *ptr = (u64 *)gdb_regs; +#endif + + for (reg = 0; reg < 16; reg++) + *(ptr++) = regs->regs[reg]; + + /* S0 - S7 */ + for (reg = 16; reg < 24; reg++) + *(ptr++) = regs->regs[reg]; + + for (reg = 24; reg < 28; reg++) + *(ptr++) = 0; + + /* GP, SP, FP, RA */ + for (reg = 28; reg < 32; reg++) + *(ptr++) = regs->regs[reg]; + + *(ptr++) = regs->cp0_status; + *(ptr++) = regs->lo; + *(ptr++) = regs->hi; + *(ptr++) = regs->cp0_badvaddr; + *(ptr++) = regs->cp0_cause; + *(ptr++) = regs->cp0_epc; +} + +/* + * Calls linux_debug_hook before the kernel dies. If KGDB is enabled, + * then try to fall into the debugger + */ +static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd, + void *ptr) +{ + struct die_args *args = (struct die_args *)ptr; + struct pt_regs *regs = args->regs; + int trap = (regs->cp0_cause & 0x7c) >> 2; + + if (fixup_exception(regs)) + return NOTIFY_DONE; + + /* Userpace events, ignore. */ + if (user_mode(regs)) + return NOTIFY_DONE; + + if (atomic_read(&kgdb_active) != -1) + kgdb_nmicallback(smp_processor_id(), regs); + + if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs)) + return NOTIFY_DONE; + + if (atomic_read(&kgdb_setting_breakpoint)) + if ((trap == 9) && (regs->cp0_epc == (unsigned long)breakinst)) + regs->cp0_epc += 4; + + /* In SMP mode, __flush_cache_all does IPI */ + local_irq_enable(); + __flush_cache_all(); + + return NOTIFY_STOP; +} + +static struct notifier_block kgdb_notifier = { + .notifier_call = kgdb_mips_notify, +}; + +/* + * Handle the 's' and 'c' commands + */ +int kgdb_arch_handle_exception(int vector, int signo, int err_code, + char *remcom_in_buffer, char *remcom_out_buffer, + struct pt_regs *regs) +{ + char *ptr; + unsigned long address; + int cpu = smp_processor_id(); + + switch (remcom_in_buffer[0]) { + case 's': + case 'c': + /* handle the optional parameter */ + ptr = &remcom_in_buffer[1]; + if (kgdb_hex2long(&ptr, &address)) + regs->cp0_epc = address; + + atomic_set(&kgdb_cpu_doing_single_step, -1); + if (remcom_in_buffer[0] == 's') + if (kgdb_contthread) + atomic_set(&kgdb_cpu_doing_single_step, cpu); + + return 0; + } + + return -1; +} + +struct kgdb_arch arch_kgdb_ops; + +/* + * We use kgdb_early_setup so that functions we need to call now don't + * cause trouble when called again later. + */ +int kgdb_arch_init(void) +{ + union mips_instruction insn = { + .r_format = { + .opcode = spec_op, + .func = break_op, + } + }; + memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE); + + register_die_notifier(&kgdb_notifier); + + return 0; +} + +/* + * kgdb_arch_exit - Perform any architecture specific uninitalization. + * + * This function will handle the uninitalization of any architecture + * specific callbacks, for dynamic registration and unregistration. + */ +void kgdb_arch_exit(void) +{ + unregister_die_notifier(&kgdb_notifier); +} diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index b8ea4e9d0d8..426cced1e9d 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -23,6 +23,8 @@ #include #include #include +#include +#include #include #include @@ -425,6 +427,10 @@ asmlinkage void do_be(struct pt_regs *regs) printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n", data ? "Data" : "Instruction", field, regs->cp0_epc, field, regs->regs[31]); + if (notify_die(DIE_OOPS, "bus error", regs, SIGBUS, 0, 0) + == NOTIFY_STOP) + return; + die_if_kernel("Oops", regs); force_sig(SIGBUS, current); } @@ -623,6 +629,9 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) { siginfo_t info; + if (notify_die(DIE_FP, "FP exception", regs, SIGFPE, 0, 0) + == NOTIFY_STOP) + return; die_if_kernel("FP exception in kernel code", regs); if (fcr31 & FPU_CSR_UNI_X) { @@ -682,6 +691,9 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code, siginfo_t info; char b[40]; + if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP) + return; + /* * A short test says that IRIX 5.3 sends SIGTRAP for all trap * insns, even for trap and break codes that indicate arithmetic @@ -762,6 +774,10 @@ asmlinkage void do_ri(struct pt_regs *regs) unsigned int opcode = 0; int status = -1; + if (notify_die(DIE_RI, "RI Fault", regs, SIGSEGV, 0, 0) + == NOTIFY_STOP) + return; + die_if_kernel("Reserved instruction in kernel code", regs); if (unlikely(compute_return_epc(regs) < 0)) @@ -1537,6 +1553,11 @@ void __init trap_init(void) extern char except_vec4; unsigned long i; +#if defined(CONFIG_KGDB) + if (kgdb_early_setup) + return; /* Already done */ +#endif + if (cpu_has_veic || cpu_has_vint) ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64); else diff --git a/include/asm-mips/kdebug.h b/include/asm-mips/kdebug.h index 6ece1b03766..5bf62aafc89 100644 --- a/include/asm-mips/kdebug.h +++ b/include/asm-mips/kdebug.h @@ -1 +1,13 @@ -#include +#ifndef _ASM_MIPS_KDEBUG_H +#define _ASM_MIPS_KDEBUG_H + +#include + +enum die_val { + DIE_OOPS = 1, + DIE_FP, + DIE_TRAP, + DIE_RI, +}; + +#endif /* _ASM_MIPS_KDEBUG_H */ diff --git a/include/asm-mips/kgdb.h b/include/asm-mips/kgdb.h new file mode 100644 index 00000000000..48223b09396 --- /dev/null +++ b/include/asm-mips/kgdb.h @@ -0,0 +1,44 @@ +#ifndef __ASM_KGDB_H_ +#define __ASM_KGDB_H_ + +#ifdef __KERNEL__ + +#include + +#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS32) + +#define KGDB_GDB_REG_SIZE 32 + +#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \ + (_MIPS_ISA == _MIPS_ISA_MIPS64) + +#ifdef CONFIG_32BIT +#define KGDB_GDB_REG_SIZE 32 +#else /* CONFIG_CPU_32BIT */ +#define KGDB_GDB_REG_SIZE 64 +#endif +#else +#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA" +#endif /* _MIPS_ISA */ + +#define BUFMAX 2048 +#if (KGDB_GDB_REG_SIZE == 32) +#define NUMREGBYTES (90*sizeof(u32)) +#define NUMCRITREGBYTES (12*sizeof(u32)) +#else +#define NUMREGBYTES (90*sizeof(u64)) +#define NUMCRITREGBYTES (12*sizeof(u64)) +#endif +#define BREAK_INSTR_SIZE 4 +#define CACHE_FLUSH_IS_SAFE 0 + +extern void arch_kgdb_breakpoint(void); +extern int kgdb_early_setup; +extern void *saved_vectors[32]; +extern void handle_exception(struct pt_regs *regs); +extern void breakinst(void); + +#endif /* __KERNEL__ */ + +#endif /* __ASM_KGDB_H_ */ -- GitLab From de1d7bb63893b4246ce60797aa554341e908f034 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sat, 26 Jul 2008 01:34:52 +0900 Subject: [PATCH 0441/1024] [MIPS] Cobalt: update defconfig Select new LCD framebuffer driver. Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/configs/cobalt_defconfig | 378 ++++++++++++++++++++--------- 1 file changed, 268 insertions(+), 110 deletions(-) diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index 2678b7ec335..eb44b72254a 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc5 -# Thu Sep 6 13:14:29 2007 +# Linux kernel version: 2.6.26 +# Fri Jul 25 10:25:34 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set CONFIG_MIPS_COBALT=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set @@ -24,6 +26,7 @@ CONFIG_MIPS_COBALT=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -34,19 +37,25 @@ CONFIG_MIPS_COBALT=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set # CONFIG_WR_PPMC is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_GT641XX=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_EARLY_PRINTK=y @@ -108,6 +117,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -115,10 +125,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -151,23 +167,28 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -177,23 +198,37 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -207,18 +242,18 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_I8253=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -232,8 +267,8 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -250,6 +285,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -269,6 +305,7 @@ CONFIG_IP_FIB_HASH=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -276,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -294,10 +329,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -305,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -326,9 +358,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -337,6 +372,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -350,6 +386,7 @@ CONFIG_MTD_BLKDEVS=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -384,6 +421,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x0 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -423,7 +461,9 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -462,10 +502,15 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -475,7 +520,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -504,7 +548,9 @@ CONFIG_ATA=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set @@ -518,29 +564,27 @@ CONFIG_ATA=y CONFIG_PATA_VIA=y # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set # -# Fusion MPT device support +# IEEE 1394 (FireWire) support # -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # -# IEEE 1394 (FireWire) support +# Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -562,7 +606,12 @@ CONFIG_TULIP=y # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set +# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -572,6 +621,7 @@ CONFIG_TULIP=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -580,7 +630,6 @@ CONFIG_TULIP=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -588,7 +637,6 @@ CONFIG_TULIP=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -607,7 +655,6 @@ CONFIG_INPUT_POLLDEV=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -642,7 +689,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -664,65 +713,122 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -CONFIG_COBALT_LCD=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_COBALT=y +# CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -743,6 +849,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -751,15 +858,18 @@ CONFIG_USB=m # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -773,6 +883,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -785,6 +896,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set @@ -793,6 +905,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -800,15 +913,11 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y +# CONFIG_USB_MON is not set # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -833,16 +942,10 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -858,6 +961,8 @@ CONFIG_LEDS_COBALT_RAQ=y CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -882,9 +987,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -892,23 +998,7 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -923,22 +1013,22 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4DEV_FS=y +CONFIG_EXT4DEV_FS_XATTR=y +CONFIG_EXT4DEV_FS_POSIX_ACL=y +CONFIG_EXT4DEV_FS_SECURITY=y CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -967,7 +1057,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=y # @@ -983,32 +1072,28 @@ CONFIG_CONFIGFS_FS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1022,34 +1107,26 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" # @@ -1057,14 +1134,95 @@ CONFIG_CMDLINE="" # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set -- GitLab From d02a4e31ed0385eb34fe49f19d69a860a020ca3c Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Wed, 30 Jul 2008 13:44:55 +0200 Subject: [PATCH 0442/1024] fix NE2000 linkage error Trying to build with CONFIG_NE2000=m fails with: scripts/mod/modpost -o /tmp/tmp/linux-2.6.27-rc1/Module.symvers -S -s ERROR: "NS8390_init" [drivers/net/ne.ko] undefined! This is because the split of 8390 into pausing and non-pausing versions was incompletely propagated to ne.c. This fixes it. Signed-off-by: Mikael Pettersson Signed-off-by: Jeff Garzik --- drivers/net/ne.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ne.c b/drivers/net/ne.c index 2fec6122c7f..42443d69742 100644 --- a/drivers/net/ne.c +++ b/drivers/net/ne.c @@ -536,7 +536,7 @@ static int __init ne_probe1(struct net_device *dev, unsigned long ioaddr) #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = eip_poll; #endif - NS8390_init(dev, 0); + NS8390p_init(dev, 0); ret = register_netdev(dev); if (ret) @@ -794,7 +794,7 @@ retry: if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */ printk(KERN_WARNING "%s: timeout waiting for Tx RDC.\n", dev->name); ne_reset_8390(dev); - NS8390_init(dev,1); + NS8390p_init(dev, 1); break; } @@ -855,7 +855,7 @@ static int ne_drv_resume(struct platform_device *pdev) if (netif_running(dev)) { ne_reset_8390(dev); - NS8390_init(dev, 1); + NS8390p_init(dev, 1); netif_device_attach(dev); } return 0; -- GitLab From b0ca2a21f769ae255bd6821cbc5af8af797f1da7 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Mon, 30 Jun 2008 11:08:17 +0900 Subject: [PATCH 0443/1024] sh_eth: Add support of SH7763 to sh_eth SH7763 has Ethernet core same as SH7710/SH7712. Positions of some registry are different, but the basic part is the same. I add support of ethernet of sh7763 to sh_eth. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 4 +- drivers/net/sh_eth.c | 202 ++++++++++++++++---- drivers/net/sh_eth.h | 426 +++++++++++++++++++++++++++++++------------ 3 files changed, 482 insertions(+), 150 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index fa533c27052..8a03875ec87 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -510,14 +510,14 @@ config STNIC config SH_ETH tristate "Renesas SuperH Ethernet support" depends on SUPERH && \ - (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712) + (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763) select CRC32 select MII select MDIO_BITBANG select PHYLIB help Renesas SuperH Ethernet device driver. - This driver support SH7710 and SH7712. + This driver support SH7710, SH7712 and SH7763. config SUNLANCE tristate "Sun LANCE support" diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index c69ba1395fa..6a06b9503e4 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -1,7 +1,7 @@ /* * SuperH Ethernet device driver * - * Copyright (C) 2006,2007 Nobuhiro Iwamatsu + * Copyright (C) 2006-2008 Nobuhiro Iwamatsu * Copyright (C) 2008 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or modify it @@ -143,13 +143,39 @@ static struct mdiobb_ops bb_ops = { .get_mdio_data = sh_get_mdio, }; +/* Chip Reset */ static void sh_eth_reset(struct net_device *ndev) { u32 ioaddr = ndev->base_addr; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + int cnt = 100; + + ctrl_outl(EDSR_ENALL, ioaddr + EDSR); + ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR); + while (cnt > 0) { + if (!(ctrl_inl(ioaddr + EDMR) & 0x3)) + break; + mdelay(1); + cnt--; + } + if (cnt < 0) + printk(KERN_ERR "Device reset fail\n"); + + /* Table Init */ + ctrl_outl(0x0, ioaddr + TDLAR); + ctrl_outl(0x0, ioaddr + TDFAR); + ctrl_outl(0x0, ioaddr + TDFXR); + ctrl_outl(0x0, ioaddr + TDFFR); + ctrl_outl(0x0, ioaddr + RDLAR); + ctrl_outl(0x0, ioaddr + RDFAR); + ctrl_outl(0x0, ioaddr + RDFXR); + ctrl_outl(0x0, ioaddr + RDFFR); +#else ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR); mdelay(3); ctrl_outl(ctrl_inl(ioaddr + EDMR) & ~EDMR_SRST, ioaddr + EDMR); +#endif } /* free skb and descriptor buffer */ @@ -180,6 +206,7 @@ static void sh_eth_ring_free(struct net_device *ndev) /* format skb and descriptor buffer */ static void sh_eth_ring_format(struct net_device *ndev) { + u32 ioaddr = ndev->base_addr, reserve = 0; struct sh_eth_private *mdp = netdev_priv(ndev); int i; struct sk_buff *skb; @@ -201,9 +228,15 @@ static void sh_eth_ring_format(struct net_device *ndev) mdp->rx_skbuff[i] = skb; if (skb == NULL) break; - skb->dev = ndev; /* Mark as being used by this device. */ + skb->dev = ndev; /* Mark as being used by this device. */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + reserve = SH7763_SKB_ALIGN + - ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1)); + if (reserve) + skb_reserve(skb, reserve); +#else skb_reserve(skb, RX_OFFSET); - +#endif /* RX descriptor */ rxdesc = &mdp->rx_ring[i]; rxdesc->addr = (u32)skb->data & ~0x3UL; @@ -211,12 +244,25 @@ static void sh_eth_ring_format(struct net_device *ndev) /* The size of the buffer is 16 byte boundary. */ rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F; + /* Rx descriptor address set */ + if (i == 0) { + ctrl_outl((u32)rxdesc, ioaddr + RDLAR); +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl((u32)rxdesc, ioaddr + RDFAR); +#endif + } } + /* Rx descriptor address set */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl((u32)rxdesc, ioaddr + RDFXR); + ctrl_outl(0x1, ioaddr + RDFFR); +#endif + mdp->dirty_rx = (u32) (i - RX_RING_SIZE); /* Mark the last entry as wrapping the ring. */ - rxdesc->status |= cpu_to_le32(RC_RDEL); + rxdesc->status |= cpu_to_le32(RD_RDEL); memset(mdp->tx_ring, 0, tx_ringsize); @@ -226,8 +272,21 @@ static void sh_eth_ring_format(struct net_device *ndev) txdesc = &mdp->tx_ring[i]; txdesc->status = cpu_to_le32(TD_TFP); txdesc->buffer_length = 0; + if (i == 0) { + /* Rx descriptor address set */ + ctrl_outl((u32)txdesc, ioaddr + TDLAR); +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl((u32)txdesc, ioaddr + TDFAR); +#endif + } } + /* Rx descriptor address set */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl((u32)txdesc, ioaddr + TDFXR); + ctrl_outl(0x1, ioaddr + TDFFR); +#endif + txdesc->status |= cpu_to_le32(TD_TDLE); } @@ -311,31 +370,43 @@ static int sh_eth_dev_init(struct net_device *ndev) /* Soft Reset */ sh_eth_reset(ndev); - ctrl_outl(RPADIR_PADS1, ioaddr + RPADIR); /* SH7712-DMA-RX-PAD2 */ + /* Descriptor format */ + sh_eth_ring_format(ndev); + ctrl_outl(RPADIR_INIT, ioaddr + RPADIR); /* all sh_eth int mask */ ctrl_outl(0, ioaddr + EESIPR); - /* FIFO size set */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl(EDMR_EL, ioaddr + EDMR); +#else ctrl_outl(0, ioaddr + EDMR); /* Endian change */ +#endif + /* FIFO size set */ ctrl_outl((FIFO_SIZE_T | FIFO_SIZE_R), ioaddr + FDR); ctrl_outl(0, ioaddr + TFTR); + /* Frame recv control */ ctrl_outl(0, ioaddr + RMCR); rx_int_var = mdp->rx_int_var = DESC_I_RINT8 | DESC_I_RINT5; tx_int_var = mdp->tx_int_var = DESC_I_TINT2; ctrl_outl(rx_int_var | tx_int_var, ioaddr + TRSCER); +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + /* Burst sycle set */ + ctrl_outl(0x800, ioaddr + BCULR); +#endif + ctrl_outl((FIFO_F_D_RFF | FIFO_F_D_RFD), ioaddr + FCFTR); - ctrl_outl(0, ioaddr + TRIMD); - /* Descriptor format */ - sh_eth_ring_format(ndev); +#if !defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl(0, ioaddr + TRIMD); +#endif - ctrl_outl((u32)mdp->rx_ring, ioaddr + RDLAR); - ctrl_outl((u32)mdp->tx_ring, ioaddr + TDLAR); + /* Recv frame limit set register */ + ctrl_outl(RFLR_VALUE, ioaddr + RFLR); ctrl_outl(ctrl_inl(ioaddr + EESR), ioaddr + EESR); ctrl_outl((DMAC_M_RFRMER | DMAC_M_ECI | 0x003fffff), ioaddr + EESIPR); @@ -345,21 +416,26 @@ static int sh_eth_dev_init(struct net_device *ndev) ECMR_ZPF | (mdp->duplex ? ECMR_DM : 0) | ECMR_TE | ECMR_RE; ctrl_outl(val, ioaddr + ECMR); - ctrl_outl(ECSR_BRCRX | ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD | - ECSIPR_MPDIP, ioaddr + ECSR); - ctrl_outl(ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | - ECSIPR_ICDIP | ECSIPR_MPDIP, ioaddr + ECSIPR); + + /* E-MAC Status Register clear */ + ctrl_outl(ECSR_INIT, ioaddr + ECSR); + + /* E-MAC Interrupt Enable register */ + ctrl_outl(ECSIPR_INIT, ioaddr + ECSIPR); /* Set MAC address */ update_mac_address(ndev); /* mask reset */ -#if defined(CONFIG_CPU_SUBTYPE_SH7710) +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7763) ctrl_outl(APR_AP, ioaddr + APR); ctrl_outl(MPR_MP, ioaddr + MPR); ctrl_outl(TPAUSER_UNLIMITED, ioaddr + TPAUSER); +#endif +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ctrl_outl(BCFR_UNLIMITED, ioaddr + BCFR); #endif + /* Setting the Rx mode will start the Rx process. */ ctrl_outl(EDRRR_R, ioaddr + EDRRR); @@ -407,7 +483,7 @@ static int sh_eth_rx(struct net_device *ndev) int boguscnt = (mdp->dirty_rx + RX_RING_SIZE) - mdp->cur_rx; struct sk_buff *skb; u16 pkt_len = 0; - u32 desc_status; + u32 desc_status, reserve = 0; rxdesc = &mdp->rx_ring[entry]; while (!(rxdesc->status & cpu_to_le32(RD_RACT))) { @@ -454,28 +530,38 @@ static int sh_eth_rx(struct net_device *ndev) for (; mdp->cur_rx - mdp->dirty_rx > 0; mdp->dirty_rx++) { entry = mdp->dirty_rx % RX_RING_SIZE; rxdesc = &mdp->rx_ring[entry]; + /* The size of the buffer is 16 byte boundary. */ + rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F; + if (mdp->rx_skbuff[entry] == NULL) { skb = dev_alloc_skb(mdp->rx_buf_sz); mdp->rx_skbuff[entry] = skb; if (skb == NULL) break; /* Better luck next round. */ skb->dev = ndev; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + reserve = SH7763_SKB_ALIGN + - ((uint32_t)skb->data & (SH7763_SKB_ALIGN-1)); + if (reserve) + skb_reserve(skb, reserve); +#else skb_reserve(skb, RX_OFFSET); +#endif + skb->ip_summed = CHECKSUM_NONE; rxdesc->addr = (u32)skb->data & ~0x3UL; } - /* The size of the buffer is 16 byte boundary. */ - rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F; if (entry >= RX_RING_SIZE - 1) rxdesc->status |= - cpu_to_le32(RD_RACT | RD_RFP | RC_RDEL); + cpu_to_le32(RD_RACT | RD_RFP | RD_RDEL); else rxdesc->status |= - cpu_to_le32(RD_RACT | RD_RFP); + cpu_to_le32(RD_RACT | RD_RFP); } /* Restart Rx engine if stopped. */ /* If we don't need to check status, don't. -KDU */ - ctrl_outl(EDRRR_R, ndev->base_addr + EDRRR); + if (!(ctrl_inl(ndev->base_addr + EDRRR) & EDRRR_R)) + ctrl_outl(EDRRR_R, ndev->base_addr + EDRRR); return 0; } @@ -529,13 +615,14 @@ static void sh_eth_error(struct net_device *ndev, int intr_status) printk(KERN_ERR "Receive Frame Overflow\n"); } } - +#if !defined(CONFIG_CPU_SUBTYPE_SH7763) if (intr_status & EESR_ADE) { if (intr_status & EESR_TDE) { if (intr_status & EESR_TFE) mdp->stats.tx_fifo_errors++; } } +#endif if (intr_status & EESR_RDE) { /* Receive Descriptor Empty int */ @@ -550,8 +637,11 @@ static void sh_eth_error(struct net_device *ndev, int intr_status) mdp->stats.rx_fifo_errors++; printk(KERN_ERR "Receive FIFO Overflow\n"); } - if (intr_status & - (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE)) { + if (intr_status & (EESR_TWB | EESR_TABT | +#if !defined(CONFIG_CPU_SUBTYPE_SH7763) + EESR_ADE | +#endif + EESR_TDE | EESR_TFE)) { /* Tx error */ u32 edtrr = ctrl_inl(ndev->base_addr + EDTRR); /* dmesg */ @@ -582,17 +672,23 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev) ioaddr = ndev->base_addr; spin_lock(&mdp->lock); + /* Get interrpt stat */ intr_status = ctrl_inl(ioaddr + EESR); /* Clear interrupt */ ctrl_outl(intr_status, ioaddr + EESR); - if (intr_status & (EESR_FRC | EESR_RINT8 | - EESR_RINT5 | EESR_RINT4 | EESR_RINT3 | EESR_RINT2 | - EESR_RINT1)) + if (intr_status & (EESR_FRC | /* Frame recv*/ + EESR_RMAF | /* Multi cast address recv*/ + EESR_RRF | /* Bit frame recv */ + EESR_RTLF | /* Long frame recv*/ + EESR_RTSF | /* short frame recv */ + EESR_PRE | /* PHY-LSI recv error */ + EESR_CERF)){ /* recv frame CRC error */ sh_eth_rx(ndev); - if (intr_status & (EESR_FTC | - EESR_TINT4 | EESR_TINT3 | EESR_TINT2 | EESR_TINT1)) { + } + /* Tx Check */ + if (intr_status & TX_CHECK) { sh_eth_txfree(ndev); netif_wake_queue(ndev); } @@ -631,11 +727,32 @@ static void sh_eth_adjust_link(struct net_device *ndev) if (phydev->duplex != mdp->duplex) { new_state = 1; mdp->duplex = phydev->duplex; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + if (mdp->duplex) { /* FULL */ + ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM, + ioaddr + ECMR); + } else { /* Half */ + ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM, + ioaddr + ECMR); + } +#endif } if (phydev->speed != mdp->speed) { new_state = 1; mdp->speed = phydev->speed; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + switch (mdp->speed) { + case 10: /* 10BASE */ + ctrl_outl(GECMR_10, ioaddr + GECMR); break; + case 100:/* 100BASE */ + ctrl_outl(GECMR_100, ioaddr + GECMR); break; + case 1000: /* 1000BASE */ + ctrl_outl(GECMR_1000, ioaddr + GECMR); break; + default: + break; + } +#endif } if (mdp->link == PHY_DOWN) { ctrl_outl((ctrl_inl(ioaddr + ECMR) & ~ECMR_TXF) @@ -730,7 +847,7 @@ static int sh_eth_open(struct net_device *ndev) /* Set the timer to check for link beat. */ init_timer(&mdp->timer); mdp->timer.expires = (jiffies + (24 * HZ)) / 10;/* 2.4 sec. */ - setup_timer(&mdp->timer, sh_eth_timer, ndev); + setup_timer(&mdp->timer, sh_eth_timer, (unsigned long)ndev); return ret; @@ -820,7 +937,9 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev) mdp->cur_tx++; - ctrl_outl(EDTRR_TRNS, ndev->base_addr + EDTRR); + if (!(ctrl_inl(ndev->base_addr + EDTRR) & EDTRR_TRNS)) + ctrl_outl(EDTRR_TRNS, ndev->base_addr + EDTRR); + ndev->trans_start = jiffies; return 0; @@ -877,9 +996,15 @@ static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev) ctrl_outl(0, ioaddr + CDCR); /* (write clear) */ mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + LCCR); ctrl_outl(0, ioaddr + LCCR); /* (write clear) */ +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CERCR);/* CERCR */ + ctrl_outl(0, ioaddr + CERCR); /* (write clear) */ + mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CEECR);/* CEECR */ + ctrl_outl(0, ioaddr + CEECR); /* (write clear) */ +#else mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CNDCR); ctrl_outl(0, ioaddr + CNDCR); /* (write clear) */ - +#endif return &mdp->stats; } @@ -929,8 +1054,13 @@ static void sh_eth_tsu_init(u32 ioaddr) ctrl_outl(0, ioaddr + TSU_FWSL0); ctrl_outl(0, ioaddr + TSU_FWSL1); ctrl_outl(TSU_FWSLC_POSTENU | TSU_FWSLC_POSTENL, ioaddr + TSU_FWSLC); +#if defined(CONFIG_CPU_SUBTYPE_SH7763) + ctrl_outl(0, ioaddr + TSU_QTAG0); /* Disable QTAG(0->1) */ + ctrl_outl(0, ioaddr + TSU_QTAG1); /* Disable QTAG(1->0) */ +#else ctrl_outl(0, ioaddr + TSU_QTAGM0); /* Disable QTAG(0->1) */ ctrl_outl(0, ioaddr + TSU_QTAGM1); /* Disable QTAG(1->0) */ +#endif ctrl_outl(0, ioaddr + TSU_FWSR); /* all interrupt status clear */ ctrl_outl(0, ioaddr + TSU_FWINMK); /* Disable all interrupt */ ctrl_outl(0, ioaddr + TSU_TEN); /* Disable all CAM entry */ @@ -1088,7 +1218,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev) /* First device only init */ if (!devno) { /* reset device */ - ctrl_outl(ARSTR_ARSTR, ndev->base_addr + ARSTR); + ctrl_outl(ARSTR_ARSTR, ARSTR); mdelay(1); /* TSU init (Init only)*/ @@ -1110,8 +1240,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev) ndev->name, CARDNAME, (u32) ndev->base_addr); for (i = 0; i < 5; i++) - printk(KERN_INFO "%2.2x:", ndev->dev_addr[i]); - printk(KERN_INFO "%2.2x, IRQ %d.\n", ndev->dev_addr[i], ndev->irq); + printk(KERN_INFO "%02X:", ndev->dev_addr[i]); + printk(KERN_INFO "%02X, IRQ %d.\n", ndev->dev_addr[i], ndev->irq); platform_set_drvdata(pdev, ndev); diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h index e01e1c34771..45ad1b09ca5 100644 --- a/drivers/net/sh_eth.h +++ b/drivers/net/sh_eth.h @@ -32,118 +32,249 @@ #define CARDNAME "sh-eth" #define TX_TIMEOUT (5*HZ) - -#define TX_RING_SIZE 128 /* Tx ring size */ -#define RX_RING_SIZE 128 /* Rx ring size */ -#define RX_OFFSET 2 /* skb offset */ +#define TX_RING_SIZE 64 /* Tx ring size */ +#define RX_RING_SIZE 64 /* Rx ring size */ #define ETHERSMALL 60 #define PKT_BUF_SZ 1538 +#ifdef CONFIG_CPU_SUBTYPE_SH7763 + +#define SH7763_SKB_ALIGN 32 /* Chip Base Address */ -#define SH_TSU_ADDR 0xA7000804 +# define SH_TSU_ADDR 0xFFE01800 +# define ARSTR 0xFFE01800 + +/* Chip Registers */ +/* E-DMAC */ +# define EDSR 0x000 +# define EDMR 0x400 +# define EDTRR 0x408 +# define EDRRR 0x410 +# define EESR 0x428 +# define EESIPR 0x430 +# define TDLAR 0x010 +# define TDFAR 0x014 +# define TDFXR 0x018 +# define TDFFR 0x01C +# define RDLAR 0x030 +# define RDFAR 0x034 +# define RDFXR 0x038 +# define RDFFR 0x03C +# define TRSCER 0x438 +# define RMFCR 0x440 +# define TFTR 0x448 +# define FDR 0x450 +# define RMCR 0x458 +# define RPADIR 0x460 +# define FCFTR 0x468 + +/* Ether Register */ +# define ECMR 0x500 +# define ECSR 0x510 +# define ECSIPR 0x518 +# define PIR 0x520 +# define PSR 0x528 +# define PIPR 0x52C +# define RFLR 0x508 +# define APR 0x554 +# define MPR 0x558 +# define PFTCR 0x55C +# define PFRCR 0x560 +# define TPAUSER 0x564 +# define GECMR 0x5B0 +# define BCULR 0x5B4 +# define MAHR 0x5C0 +# define MALR 0x5C8 +# define TROCR 0x700 +# define CDCR 0x708 +# define LCCR 0x710 +# define CEFCR 0x740 +# define FRECR 0x748 +# define TSFRCR 0x750 +# define TLFRCR 0x758 +# define RFCR 0x760 +# define CERCR 0x768 +# define CEECR 0x770 +# define MAFCR 0x778 + +/* TSU Absolute Address */ +# define TSU_CTRST 0x004 +# define TSU_FWEN0 0x010 +# define TSU_FWEN1 0x014 +# define TSU_FCM 0x18 +# define TSU_BSYSL0 0x20 +# define TSU_BSYSL1 0x24 +# define TSU_PRISL0 0x28 +# define TSU_PRISL1 0x2C +# define TSU_FWSL0 0x30 +# define TSU_FWSL1 0x34 +# define TSU_FWSLC 0x38 +# define TSU_QTAG0 0x40 +# define TSU_QTAG1 0x44 +# define TSU_FWSR 0x50 +# define TSU_FWINMK 0x54 +# define TSU_ADQT0 0x48 +# define TSU_ADQT1 0x4C +# define TSU_VTAG0 0x58 +# define TSU_VTAG1 0x5C +# define TSU_ADSBSY 0x60 +# define TSU_TEN 0x64 +# define TSU_POST1 0x70 +# define TSU_POST2 0x74 +# define TSU_POST3 0x78 +# define TSU_POST4 0x7C +# define TSU_ADRH0 0x100 +# define TSU_ADRL0 0x104 +# define TSU_ADRH31 0x1F8 +# define TSU_ADRL31 0x1FC + +# define TXNLCR0 0x80 +# define TXALCR0 0x84 +# define RXNLCR0 0x88 +# define RXALCR0 0x8C +# define FWNLCR0 0x90 +# define FWALCR0 0x94 +# define TXNLCR1 0xA0 +# define TXALCR1 0xA4 +# define RXNLCR1 0xA8 +# define RXALCR1 0xAC +# define FWNLCR1 0xB0 +# define FWALCR1 0x40 + +#else /* CONFIG_CPU_SUBTYPE_SH7763 */ +# define RX_OFFSET 2 /* skb offset */ +/* Chip base address */ +# define SH_TSU_ADDR 0xA7000804 +# define ARSTR 0xA7000800 /* Chip Registers */ /* E-DMAC */ -#define EDMR 0x0000 -#define EDTRR 0x0004 -#define EDRRR 0x0008 -#define TDLAR 0x000C -#define RDLAR 0x0010 -#define EESR 0x0014 -#define EESIPR 0x0018 -#define TRSCER 0x001C -#define RMFCR 0x0020 -#define TFTR 0x0024 -#define FDR 0x0028 -#define RMCR 0x002C -#define EDOCR 0x0030 -#define FCFTR 0x0034 -#define RPADIR 0x0038 -#define TRIMD 0x003C -#define RBWAR 0x0040 -#define RDFAR 0x0044 -#define TBRAR 0x004C -#define TDFAR 0x0050 +# define EDMR 0x0000 +# define EDTRR 0x0004 +# define EDRRR 0x0008 +# define TDLAR 0x000C +# define RDLAR 0x0010 +# define EESR 0x0014 +# define EESIPR 0x0018 +# define TRSCER 0x001C +# define RMFCR 0x0020 +# define TFTR 0x0024 +# define FDR 0x0028 +# define RMCR 0x002C +# define EDOCR 0x0030 +# define FCFTR 0x0034 +# define RPADIR 0x0038 +# define TRIMD 0x003C +# define RBWAR 0x0040 +# define RDFAR 0x0044 +# define TBRAR 0x004C +# define TDFAR 0x0050 + /* Ether Register */ -#define ECMR 0x0160 -#define ECSR 0x0164 -#define ECSIPR 0x0168 -#define PIR 0x016C -#define MAHR 0x0170 -#define MALR 0x0174 -#define RFLR 0x0178 -#define PSR 0x017C -#define TROCR 0x0180 -#define CDCR 0x0184 -#define LCCR 0x0188 -#define CNDCR 0x018C -#define CEFCR 0x0194 -#define FRECR 0x0198 -#define TSFRCR 0x019C -#define TLFRCR 0x01A0 -#define RFCR 0x01A4 -#define MAFCR 0x01A8 -#define IPGR 0x01B4 -#if defined(CONFIG_CPU_SUBTYPE_SH7710) -#define APR 0x01B8 -#define MPR 0x01BC -#define TPAUSER 0x1C4 -#define BCFR 0x1CC -#endif /* CONFIG_CPU_SH7710 */ - -#define ARSTR 0x0800 +# define ECMR 0x0160 +# define ECSR 0x0164 +# define ECSIPR 0x0168 +# define PIR 0x016C +# define MAHR 0x0170 +# define MALR 0x0174 +# define RFLR 0x0178 +# define PSR 0x017C +# define TROCR 0x0180 +# define CDCR 0x0184 +# define LCCR 0x0188 +# define CNDCR 0x018C +# define CEFCR 0x0194 +# define FRECR 0x0198 +# define TSFRCR 0x019C +# define TLFRCR 0x01A0 +# define RFCR 0x01A4 +# define MAFCR 0x01A8 +# define IPGR 0x01B4 +# if defined(CONFIG_CPU_SUBTYPE_SH7710) +# define APR 0x01B8 +# define MPR 0x01BC +# define TPAUSER 0x1C4 +# define BCFR 0x1CC +# endif /* CONFIG_CPU_SH7710 */ /* TSU */ -#define TSU_CTRST 0x004 -#define TSU_FWEN0 0x010 -#define TSU_FWEN1 0x014 -#define TSU_FCM 0x018 -#define TSU_BSYSL0 0x020 -#define TSU_BSYSL1 0x024 -#define TSU_PRISL0 0x028 -#define TSU_PRISL1 0x02C -#define TSU_FWSL0 0x030 -#define TSU_FWSL1 0x034 -#define TSU_FWSLC 0x038 -#define TSU_QTAGM0 0x040 -#define TSU_QTAGM1 0x044 -#define TSU_ADQT0 0x048 -#define TSU_ADQT1 0x04C -#define TSU_FWSR 0x050 -#define TSU_FWINMK 0x054 -#define TSU_ADSBSY 0x060 -#define TSU_TEN 0x064 -#define TSU_POST1 0x070 -#define TSU_POST2 0x074 -#define TSU_POST3 0x078 -#define TSU_POST4 0x07C -#define TXNLCR0 0x080 -#define TXALCR0 0x084 -#define RXNLCR0 0x088 -#define RXALCR0 0x08C -#define FWNLCR0 0x090 -#define FWALCR0 0x094 -#define TXNLCR1 0x0A0 -#define TXALCR1 0x0A4 -#define RXNLCR1 0x0A8 -#define RXALCR1 0x0AC -#define FWNLCR1 0x0B0 -#define FWALCR1 0x0B4 +# define TSU_CTRST 0x004 +# define TSU_FWEN0 0x010 +# define TSU_FWEN1 0x014 +# define TSU_FCM 0x018 +# define TSU_BSYSL0 0x020 +# define TSU_BSYSL1 0x024 +# define TSU_PRISL0 0x028 +# define TSU_PRISL1 0x02C +# define TSU_FWSL0 0x030 +# define TSU_FWSL1 0x034 +# define TSU_FWSLC 0x038 +# define TSU_QTAGM0 0x040 +# define TSU_QTAGM1 0x044 +# define TSU_ADQT0 0x048 +# define TSU_ADQT1 0x04C +# define TSU_FWSR 0x050 +# define TSU_FWINMK 0x054 +# define TSU_ADSBSY 0x060 +# define TSU_TEN 0x064 +# define TSU_POST1 0x070 +# define TSU_POST2 0x074 +# define TSU_POST3 0x078 +# define TSU_POST4 0x07C +# define TXNLCR0 0x080 +# define TXALCR0 0x084 +# define RXNLCR0 0x088 +# define RXALCR0 0x08C +# define FWNLCR0 0x090 +# define FWALCR0 0x094 +# define TXNLCR1 0x0A0 +# define TXALCR1 0x0A4 +# define RXNLCR1 0x0A8 +# define RXALCR1 0x0AC +# define FWNLCR1 0x0B0 +# define FWALCR1 0x0B4 #define TSU_ADRH0 0x0100 #define TSU_ADRL0 0x0104 #define TSU_ADRL31 0x01FC -/* Register's bits */ +#endif /* CONFIG_CPU_SUBTYPE_SH7763 */ + +/* + * Register's bits + */ +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +/* EDSR */ +enum EDSR_BIT { + EDSR_ENT = 0x01, EDSR_ENR = 0x02, +}; +#define EDSR_ENALL (EDSR_ENT|EDSR_ENR) + +/* GECMR */ +enum GECMR_BIT { + GECMR_10 = 0x0, GECMR_100 = 0x04, GECMR_1000 = 0x01, +}; +#endif /* EDMR */ enum DMAC_M_BIT { - EDMR_DL1 = 0x20, EDMR_DL0 = 0x10, EDMR_SRST = 0x01, + EDMR_DL1 = 0x20, EDMR_DL0 = 0x10, +#ifdef CONFIG_CPU_SUBTYPE_SH7763 + EDMR_SRST = 0x03, + EMDR_DESC_R = 0x30, /* Descriptor reserve size */ + EDMR_EL = 0x40, /* Litte endian */ +#else /* CONFIG_CPU_SUBTYPE_SH7763 */ + EDMR_SRST = 0x01, +#endif }; /* EDTRR */ enum DMAC_T_BIT { +#ifdef CONFIG_CPU_SUBTYPE_SH7763 + EDTRR_TRNS = 0x03, +#else EDTRR_TRNS = 0x01, +#endif }; /* EDRRR*/ @@ -173,21 +304,47 @@ enum PHY_STATUS_BIT { PHY_ST_LINK = 0x01, }; /* EESR */ enum EESR_BIT { - EESR_TWB = 0x40000000, EESR_TABT = 0x04000000, +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + EESR_TWB = 0x40000000, +#else + EESR_TWB = 0xC0000000, + EESR_TC1 = 0x20000000, + EESR_TUC = 0x10000000, + EESR_ROC = 0x80000000, +#endif + EESR_TABT = 0x04000000, EESR_RABT = 0x02000000, EESR_RFRMER = 0x01000000, - EESR_ADE = 0x00800000, EESR_ECI = 0x00400000, - EESR_FTC = 0x00200000, EESR_TDE = 0x00100000, - EESR_TFE = 0x00080000, EESR_FRC = 0x00040000, - EESR_RDE = 0x00020000, EESR_RFE = 0x00010000, - EESR_TINT4 = 0x00000800, EESR_TINT3 = 0x00000400, - EESR_TINT2 = 0x00000200, EESR_TINT1 = 0x00000100, - EESR_RINT8 = 0x00000080, EESR_RINT5 = 0x00000010, - EESR_RINT4 = 0x00000008, EESR_RINT3 = 0x00000004, - EESR_RINT2 = 0x00000002, EESR_RINT1 = 0x00000001, -}; - -#define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \ +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + EESR_ADE = 0x00800000, +#endif + EESR_ECI = 0x00400000, + EESR_FTC = 0x00200000, EESR_TDE = 0x00100000, + EESR_TFE = 0x00080000, EESR_FRC = 0x00040000, + EESR_RDE = 0x00020000, EESR_RFE = 0x00010000, +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + EESR_CND = 0x00000800, +#endif + EESR_DLC = 0x00000400, + EESR_CD = 0x00000200, EESR_RTO = 0x00000100, + EESR_RMAF = 0x00000080, EESR_CEEF = 0x00000040, + EESR_CELF = 0x00000020, EESR_RRF = 0x00000010, + EESR_RTLF = 0x00000008, EESR_RTSF = 0x00000004, + EESR_PRE = 0x00000002, EESR_CERF = 0x00000001, +}; + + +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +# define TX_CHECK (EESR_TC1 | EESR_FTC) +# define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \ + | EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI) +# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE) + +#else +# define TX_CHECK (EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO) +# define EESR_ERR_CHECK (EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE \ | EESR_RFRMER | EESR_ADE | EESR_TFE | EESR_TDE | EESR_ECI) +# define TX_ERROR_CEHCK (EESR_TWB | EESR_TABT | EESR_ADE | EESR_TDE | EESR_TFE) +#endif /* EESIPR */ enum DMAC_IM_BIT { @@ -207,8 +364,8 @@ enum DMAC_IM_BIT { /* Receive descriptor bit */ enum RD_STS_BIT { - RD_RACT = 0x80000000, RC_RDEL = 0x40000000, - RC_RFP1 = 0x20000000, RC_RFP0 = 0x10000000, + RD_RACT = 0x80000000, RD_RDEL = 0x40000000, + RD_RFP1 = 0x20000000, RD_RFP0 = 0x10000000, RD_RFE = 0x08000000, RD_RFS10 = 0x00000200, RD_RFS9 = 0x00000100, RD_RFS8 = 0x00000080, RD_RFS7 = 0x00000040, RD_RFS6 = 0x00000020, @@ -216,9 +373,9 @@ enum RD_STS_BIT { RD_RFS3 = 0x00000004, RD_RFS2 = 0x00000002, RD_RFS1 = 0x00000001, }; -#define RDF1ST RC_RFP1 -#define RDFEND RC_RFP0 -#define RD_RFP (RC_RFP1|RC_RFP0) +#define RDF1ST RD_RFP1 +#define RDFEND RD_RFP0 +#define RD_RFP (RD_RFP1|RD_RFP0) /* FCFTR */ enum FCFTR_BIT { @@ -231,7 +388,8 @@ enum FCFTR_BIT { /* Transfer descriptor bit */ enum TD_STS_BIT { - TD_TACT = 0x80000000, TD_TDLE = 0x40000000, TD_TFP1 = 0x20000000, + TD_TACT = 0x80000000, + TD_TDLE = 0x40000000, TD_TFP1 = 0x20000000, TD_TFP0 = 0x10000000, }; #define TDF1ST TD_TFP1 @@ -242,6 +400,10 @@ enum TD_STS_BIT { enum RECV_RST_BIT { RMCR_RST = 0x01, }; /* ECMR */ enum FELIC_MODE_BIT { +#ifdef CONFIG_CPU_SUBTYPE_SH7763 + ECMR_TRCCM = 0x04000000, ECMR_RCSC = 0x00800000, + ECMR_DPAD = 0x00200000, ECMR_RZPF = 0x00100000, +#endif ECMR_ZPF = 0x00080000, ECMR_PFR = 0x00040000, ECMR_RXF = 0x00020000, ECMR_TXF = 0x00010000, ECMR_MCT = 0x00002000, ECMR_PRCEF = 0x00001000, ECMR_PMDE = 0x00000200, ECMR_RE = 0x00000040, ECMR_TE = 0x00000020, @@ -249,18 +411,45 @@ enum FELIC_MODE_BIT { ECMR_PRM = 0x00000001, }; +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +#define ECMR_CHG_DM (ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF |\ + ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT) +#else +#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR ECMR_RXF | ECMR_TXF | ECMR_MCT) +#endif + /* ECSR */ enum ECSR_STATUS_BIT { - ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10, ECSR_LCHNG = 0x04, +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + ECSR_BRCRX = 0x20, ECSR_PSRTO = 0x10, +#endif + ECSR_LCHNG = 0x04, ECSR_MPD = 0x02, ECSR_ICD = 0x01, }; +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +# define ECSR_INIT (ECSR_ICD | ECSIPR_MPDIP) +#else +# define ECSR_INIT (ECSR_BRCRX | ECSR_PSRTO | \ + ECSR_LCHNG | ECSR_ICD | ECSIPR_MPDIP) +#endif + /* ECSIPR */ enum ECSIPR_STATUS_MASK_BIT { - ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10, ECSIPR_LCHNGIP = 0x04, +#ifndef CONFIG_CPU_SUBTYPE_SH7763 + ECSIPR_BRCRXIP = 0x20, ECSIPR_PSRTOIP = 0x10, +#endif + ECSIPR_LCHNGIP = 0x04, ECSIPR_MPDIP = 0x02, ECSIPR_ICDIP = 0x01, }; +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +# define ECSIPR_INIT (ECSIPR_LCHNGIP | ECSIPR_ICDIP | ECSIPR_MPDIP) +#else +# define ECSIPR_INIT (ECSIPR_BRCRXIP | ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | \ + ECSIPR_ICDIP | ECSIPR_MPDIP) +#endif + /* APR */ enum APR_BIT { APR_AP = 0x00000001, @@ -285,6 +474,15 @@ enum RPADIR_BIT { RPADIR_PADR = 0x0003f, }; +#if defined(CONFIG_CPU_SUBTYPE_SH7763) +# define RPADIR_INIT (0x00) +#else +# define RPADIR_INIT (RPADIR_PADS1) +#endif + +/* RFLR */ +#define RFLR_VALUE 0x1000 + /* FDR */ enum FIFO_SIZE_BIT { FIFO_SIZE_T = 0x00000700, FIFO_SIZE_R = 0x00000007, @@ -316,7 +514,7 @@ enum PHY_ANA_BIT { PHY_A_NP = 0x8000, PHY_A_ACK = 0x4000, PHY_A_RF = 0x2000, PHY_A_FCS = 0x0400, PHY_A_T4 = 0x0200, PHY_A_FDX = 0x0100, PHY_A_HDX = 0x0080, PHY_A_10FDX = 0x0040, PHY_A_10HDX = 0x0020, - PHY_A_SEL = 0x001f, + PHY_A_SEL = 0x001e, }; /* PHY_ANL */ enum PHY_ANL_BIT { @@ -449,6 +647,10 @@ struct sh_eth_private { struct net_device_stats tsu_stats; /* TSU forward status */ }; +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +/* SH7763 has endian control register */ +#define swaps(x, y) +#else static void swaps(char *src, int len) { #ifdef __LITTLE_ENDIAN__ @@ -460,5 +662,5 @@ static void swaps(char *src, int len) *p = swab32(*p); #endif } - +#endif /* CONFIG_CPU_SUBTYPE_SH7763 */ #endif -- GitLab From 68905eb4dc9c691ba09df767ac0641395025cef6 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 21 Jul 2008 09:57:26 +0200 Subject: [PATCH 0444/1024] drivers/net/ehea/ehea_main.c: Release mutex in error handling code The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // Signed-off-by: Julia Lawall Signed-off-by: Jeff Garzik --- drivers/net/ehea/ehea_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 0920b796bd7..b70c5314f53 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -2937,9 +2937,9 @@ static void ehea_rereg_mrs(struct work_struct *work) } } } - mutex_unlock(&dlpar_mem_lock); - ehea_info("re-initializing driver complete"); + ehea_info("re-initializing driver complete"); out: + mutex_unlock(&dlpar_mem_lock); return; } -- GitLab From 0056e65f9e28d83ee1a3fb4f7d0041e838f03c34 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 30 Jul 2008 14:26:25 -0700 Subject: [PATCH 0445/1024] romfs_readpage: don't report errors for pages beyond i_size We zero-fill them like we are supposed to, and that's all fine. It's only an error if the 'romfs_copyfrom()' routine isn't able to fill the data that is supposed to be there. Most of the patch is really just re-organizing the code a bit, and using separate variables for the error value and for how much of the page we actually filled from the filesystem. Reported-and-tested-by: Chris Fester Cc: Alexander Viro Cc: Matt Waddel Cc: Greg Ungerer Signed-of-by: Linus Torvalds --- fs/romfs/inode.c | 37 +++++++++++++++++++++++-------------- 1 file changed, 23 insertions(+), 14 deletions(-) diff --git a/fs/romfs/inode.c b/fs/romfs/inode.c index 8e51a2aaa97..60d2f822e87 100644 --- a/fs/romfs/inode.c +++ b/fs/romfs/inode.c @@ -418,7 +418,8 @@ static int romfs_readpage(struct file *file, struct page * page) { struct inode *inode = page->mapping->host; - loff_t offset, avail, readlen; + loff_t offset, size; + unsigned long filled; void *buf; int result = -EIO; @@ -430,21 +431,29 @@ romfs_readpage(struct file *file, struct page * page) /* 32 bit warning -- but not for us :) */ offset = page_offset(page); - if (offset < i_size_read(inode)) { - avail = inode->i_size-offset; - readlen = min_t(unsigned long, avail, PAGE_SIZE); - if (romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen) == readlen) { - if (readlen < PAGE_SIZE) { - memset(buf + readlen,0,PAGE_SIZE-readlen); - } - SetPageUptodate(page); - result = 0; + size = i_size_read(inode); + filled = 0; + result = 0; + if (offset < size) { + unsigned long readlen; + + size -= offset; + readlen = size > PAGE_SIZE ? PAGE_SIZE : size; + + filled = romfs_copyfrom(inode, buf, ROMFS_I(inode)->i_dataoffset+offset, readlen); + + if (filled != readlen) { + SetPageError(page); + filled = 0; + result = -EIO; } } - if (result) { - memset(buf, 0, PAGE_SIZE); - SetPageError(page); - } + + if (filled < PAGE_SIZE) + memset(buf + filled, 0, PAGE_SIZE-filled); + + if (!result) + SetPageUptodate(page); flush_dcache_page(page); unlock_page(page); -- GitLab From 94ad374a0751f40d25e22e036c37f7263569d24c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 30 Jul 2008 14:45:12 -0700 Subject: [PATCH 0446/1024] Fix off-by-one error in iov_iter_advance() The iov_iter_advance() function would look at the iov->iov_len entry even though it might have iterated over the whole array, and iov was pointing past the end. This would cause DEBUG_PAGEALLOC to trigger a kernel page fault if the allocation was at the end of a page, and the next page was unallocated. The quick fix is to just change the order of the tests: check that there is any iovec data left before we check the iov entry itself. Thanks to Alexey Dobriyan for finding this case, and testing the fix. Reported-and-tested-by: Alexey Dobriyan Cc: Nick Piggin Cc: Andrew Morton Cc: [2.6.25.x, 2.6.26.x] Signed-off-by: Linus Torvalds --- mm/filemap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/filemap.c b/mm/filemap.c index 42bbc6909ba..d97d1ad5547 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1879,7 +1879,7 @@ void iov_iter_advance(struct iov_iter *i, size_t bytes) * The !iov->iov_len check ensures we skip over unlikely * zero-length segments (without overruning the iovec). */ - while (bytes || unlikely(!iov->iov_len && i->count)) { + while (bytes || unlikely(i->count && !iov->iov_len)) { int copy; copy = min(bytes, iov->iov_len - base); -- GitLab From d72609e17fd93bb2f7e0f7e1bdc70b6d20e43843 Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Wed, 30 Jul 2008 15:40:50 -0700 Subject: [PATCH 0447/1024] sparc64: FUTEX_OP_ANDN fix Correct sparc64's implementation of FUTEX_OP_ANDN to do a bitwise negate of the oparg parameter before applying the AND operation. All other archs that support FUTEX_OP_ANDN either negate oparg explicitly (frv, ia64, mips, sh, x86), or do so indirectly by using an and-not instruction (powerpc). Since sparc64 has and-not, I chose to use that solution. I've not found any use of FUTEX_OP_ANDN in glibc so the impact of this bug is probably minor. But other user-space components may try to use it so it should still get fixed. Signed-off-by: Mikael Pettersson Signed-off-by: David S. Miller --- arch/sparc/include/asm/futex_64.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc/include/asm/futex_64.h b/arch/sparc/include/asm/futex_64.h index d8378935ae9..47f95839dc6 100644 --- a/arch/sparc/include/asm/futex_64.h +++ b/arch/sparc/include/asm/futex_64.h @@ -59,7 +59,7 @@ static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr) __futex_cas_op("or\t%2, %4, %1", ret, oldval, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_cas_op("and\t%2, %4, %1", ret, oldval, uaddr, oparg); + __futex_cas_op("andn\t%2, %4, %1", ret, oldval, uaddr, oparg); break; case FUTEX_OP_XOR: __futex_cas_op("xor\t%2, %4, %1", ret, oldval, uaddr, oparg); -- GitLab From 4adf0af6818f3ea52421dc0bae836cfaf20ef72a Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Wed, 30 Jul 2008 16:27:55 -0700 Subject: [PATCH 0448/1024] bridge: send correct MTU value in PMTU (revised) When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_device.c | 9 +++++- net/bridge/br_if.c | 3 ++ net/bridge/br_netfilter.c | 63 +++++++++++++++++++++------------------ net/bridge/br_private.h | 6 ++++ 4 files changed, 51 insertions(+), 30 deletions(-) diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c index d9449df7cad..9b58d70b0e7 100644 --- a/net/bridge/br_device.c +++ b/net/bridge/br_device.c @@ -68,10 +68,17 @@ static int br_dev_stop(struct net_device *dev) static int br_change_mtu(struct net_device *dev, int new_mtu) { - if (new_mtu < 68 || new_mtu > br_min_mtu(netdev_priv(dev))) + struct net_bridge *br = netdev_priv(dev); + if (new_mtu < 68 || new_mtu > br_min_mtu(br)) return -EINVAL; dev->mtu = new_mtu; + +#ifdef CONFIG_BRIDGE_NETFILTER + /* remember the MTU in the rtable for PMTU */ + br->fake_rtable.u.dst.metrics[RTAX_MTU - 1] = new_mtu; +#endif + return 0; } diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index a072ea5ca6f..63c18aacde8 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -202,6 +202,9 @@ static struct net_device *new_bridge_dev(const char *name) br->topology_change = 0; br->topology_change_detected = 0; br->ageing_time = 300 * HZ; + + br_netfilter_rtable_init(br); + INIT_LIST_HEAD(&br->age_list); br_stp_timer_init(br); diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index bb90cd7bace..6e280a8a31e 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -101,33 +101,30 @@ static inline __be16 pppoe_proto(const struct sk_buff *skb) pppoe_proto(skb) == htons(PPP_IPV6) && \ brnf_filter_pppoe_tagged) -/* We need these fake structures to make netfilter happy -- - * lots of places assume that skb->dst != NULL, which isn't - * all that unreasonable. - * +/* + * Initialize bogus route table used to keep netfilter happy. * Currently, we fill in the PMTU entry because netfilter * refragmentation needs it, and the rt_flags entry because * ipt_REJECT needs it. Future netfilter modules might - * require us to fill additional fields. */ -static struct net_device __fake_net_device = { - .hard_header_len = ETH_HLEN, -#ifdef CONFIG_NET_NS - .nd_net = &init_net, -#endif -}; + * require us to fill additional fields. + */ +void br_netfilter_rtable_init(struct net_bridge *br) +{ + struct rtable *rt = &br->fake_rtable; -static struct rtable __fake_rtable = { - .u = { - .dst = { - .__refcnt = ATOMIC_INIT(1), - .dev = &__fake_net_device, - .path = &__fake_rtable.u.dst, - .metrics = {[RTAX_MTU - 1] = 1500}, - .flags = DST_NOXFRM, - } - }, - .rt_flags = 0, -}; + atomic_set(&rt->u.dst.__refcnt, 1); + rt->u.dst.dev = &br->dev; + rt->u.dst.path = &rt->u.dst; + rt->u.dst.metrics[RTAX_MTU - 1] = 1500; + rt->u.dst.flags = DST_NOXFRM; +} + +static inline struct rtable *bridge_parent_rtable(const struct net_device *dev) +{ + struct net_bridge_port *port = rcu_dereference(dev->br_port); + + return port ? &port->br->fake_rtable : NULL; +} static inline struct net_device *bridge_parent(const struct net_device *dev) { @@ -226,8 +223,12 @@ static int br_nf_pre_routing_finish_ipv6(struct sk_buff *skb) } nf_bridge->mask ^= BRNF_NF_BRIDGE_PREROUTING; - skb->rtable = &__fake_rtable; - dst_hold(&__fake_rtable.u.dst); + skb->rtable = bridge_parent_rtable(nf_bridge->physindev); + if (!skb->rtable) { + kfree_skb(skb); + return 0; + } + dst_hold(&skb->rtable->u.dst); skb->dev = nf_bridge->physindev; nf_bridge_push_encap_header(skb); @@ -391,8 +392,12 @@ bridged_dnat: skb->pkt_type = PACKET_HOST; } } else { - skb->rtable = &__fake_rtable; - dst_hold(&__fake_rtable.u.dst); + skb->rtable = bridge_parent_rtable(nf_bridge->physindev); + if (!skb->rtable) { + kfree_skb(skb); + return 0; + } + dst_hold(&skb->rtable->u.dst); } skb->dev = nf_bridge->physindev; @@ -611,8 +616,8 @@ static unsigned int br_nf_local_in(unsigned int hook, struct sk_buff *skb, const struct net_device *out, int (*okfn)(struct sk_buff *)) { - if (skb->rtable == &__fake_rtable) { - dst_release(&__fake_rtable.u.dst); + if (skb->rtable && skb->rtable == bridge_parent_rtable(in)) { + dst_release(&skb->rtable->u.dst); skb->rtable = NULL; } diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 815ed38925b..c3dc18ddc04 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -15,6 +15,7 @@ #include #include +#include #define BR_HASH_BITS 8 #define BR_HASH_SIZE (1 << BR_HASH_BITS) @@ -92,6 +93,9 @@ struct net_bridge struct hlist_head hash[BR_HASH_SIZE]; struct list_head age_list; unsigned long feature_mask; +#ifdef CONFIG_BRIDGE_NETFILTER + struct rtable fake_rtable; +#endif unsigned long flags; #define BR_SET_MAC_ADDR 0x00000001 @@ -197,9 +201,11 @@ extern int br_ioctl_deviceless_stub(struct net *net, unsigned int cmd, void __us #ifdef CONFIG_BRIDGE_NETFILTER extern int br_netfilter_init(void); extern void br_netfilter_fini(void); +extern void br_netfilter_rtable_init(struct net_bridge *); #else #define br_netfilter_init() (0) #define br_netfilter_fini() do { } while(0) +#define br_netfilter_rtable_init(x) #endif /* br_stp.c */ -- GitLab From 697f8d0348a652593d195a13dd1067d9df911a82 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 30 Jul 2008 16:29:19 -0700 Subject: [PATCH 0449/1024] random32: seeding improvement The rationale is: * use u32 consistently * no need to do LCG on values from (better) get_random_bytes * use more data from get_random_bytes for secondary seeding * don't reduce state space on srandom32() * enforce state variable initialization restrictions Note: the second paper has a version of random32() with even longer period and a version of random64() if needed. Signed-off-by: Stephen Hemminger Signed-off-by: Andrew Morton --- lib/random32.c | 48 +++++++++++++++++++++++++++--------------------- 1 file changed, 27 insertions(+), 21 deletions(-) diff --git a/lib/random32.c b/lib/random32.c index ca87d86992b..217d5c4b666 100644 --- a/lib/random32.c +++ b/lib/random32.c @@ -56,23 +56,12 @@ static u32 __random32(struct rnd_state *state) return (state->s1 ^ state->s2 ^ state->s3); } -static void __set_random32(struct rnd_state *state, unsigned long s) +/* + * Handle minimum values for seeds + */ +static inline u32 __seed(u32 x, u32 m) { - if (s == 0) - s = 1; /* default seed is 1 */ - -#define LCG(n) (69069 * n) - state->s1 = LCG(s); - state->s2 = LCG(state->s1); - state->s3 = LCG(state->s2); - - /* "warm it up" */ - __random32(state); - __random32(state); - __random32(state); - __random32(state); - __random32(state); - __random32(state); + return (x < m) ? x + m : x; } /** @@ -107,7 +96,7 @@ void srandom32(u32 entropy) */ for_each_possible_cpu (i) { struct rnd_state *state = &per_cpu(net_rand_state, i); - __set_random32(state, state->s1 ^ entropy); + state->s1 = __seed(state->s1 ^ entropy, 1); } } EXPORT_SYMBOL(srandom32); @@ -122,7 +111,19 @@ static int __init random32_init(void) for_each_possible_cpu(i) { struct rnd_state *state = &per_cpu(net_rand_state,i); - __set_random32(state, i + jiffies); + +#define LCG(x) ((x) * 69069) /* super-duper LCG */ + state->s1 = __seed(LCG(i + jiffies), 1); + state->s2 = __seed(LCG(state->s1), 7); + state->s3 = __seed(LCG(state->s2), 15); + + /* "warm it up" */ + __random32(state); + __random32(state); + __random32(state); + __random32(state); + __random32(state); + __random32(state); } return 0; } @@ -135,13 +136,18 @@ core_initcall(random32_init); static int __init random32_reseed(void) { int i; - unsigned long seed; for_each_possible_cpu(i) { struct rnd_state *state = &per_cpu(net_rand_state,i); + u32 seeds[3]; + + get_random_bytes(&seeds, sizeof(seeds)); + state->s1 = __seed(seeds[0], 1); + state->s2 = __seed(seeds[1], 7); + state->s3 = __seed(seeds[2], 15); - get_random_bytes(&seed, sizeof(seed)); - __set_random32(state, seed); + /* mix it in */ + __random32(state); } return 0; } -- GitLab From 6a8341b68b5269de71c32c6df91f4b0298da031d Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 30 Jul 2008 16:30:15 -0700 Subject: [PATCH 0450/1024] net: use the common ascii hex helpers Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/skfp/smt.c | 13 ++++++------- net/ipv4/netfilter/ipt_CLUSTERIP.c | 5 ++--- 2 files changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/net/skfp/smt.c b/drivers/net/skfp/smt.c index ffbfb1b79f9..805383b33d3 100644 --- a/drivers/net/skfp/smt.c +++ b/drivers/net/skfp/smt.c @@ -19,6 +19,7 @@ #include "h/smc.h" #include "h/smt_p.h" #include +#include #define KERNEL #include "h/smtstate.h" @@ -1730,20 +1731,18 @@ void fddi_send_antc(struct s_smc *smc, struct fddi_addr *dest) #endif #ifdef DEBUG -#define hextoasc(x) "0123456789abcdef"[x] - char *addr_to_string(struct fddi_addr *addr) { int i ; static char string[6*3] = "****" ; for (i = 0 ; i < 6 ; i++) { - string[i*3] = hextoasc((addr->a[i]>>4)&0xf) ; - string[i*3+1] = hextoasc((addr->a[i])&0xf) ; - string[i*3+2] = ':' ; + string[i * 3] = hex_asc_hi(addr->a[i]); + string[i * 3 + 1] = hex_asc_lo(addr->a[i]); + string[i * 3 + 2] = ':'; } - string[5*3+2] = 0 ; - return(string) ; + string[5 * 3 + 2] = 0; + return(string); } #endif diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c index 1819ad7ab91..fafe8ebb4c5 100644 --- a/net/ipv4/netfilter/ipt_CLUSTERIP.c +++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c @@ -475,11 +475,10 @@ static void arp_print(struct arp_payload *payload) #define HBUFFERLEN 30 char hbuffer[HBUFFERLEN]; int j,k; - const char hexbuf[]= "0123456789abcdef"; for (k=0, j=0; k < HBUFFERLEN-3 && j < ETH_ALEN; j++) { - hbuffer[k++]=hexbuf[(payload->src_hw[j]>>4)&15]; - hbuffer[k++]=hexbuf[payload->src_hw[j]&15]; + hbuffer[k++] = hex_asc_hi(payload->src_hw[j]); + hbuffer[k++] = hex_asc_lo(payload->src_hw[j]); hbuffer[k++]=':'; } hbuffer[--k]='\0'; -- GitLab From cba5cbd1559f49bec76e54de6ed21b7df3742ada Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 30 Jul 2008 16:31:46 -0700 Subject: [PATCH 0451/1024] atm: fix const assignment/discard warnings in the ATM networking driver Fix const assignment/discard warnings in the ATM networking driver. The lane2_assoc_ind() function needed its arguments changing to match changes in the lane2_ops struct (patch 61c33e012964ce358b42d2a1e9cd309af5dab02b "atm: use const where reasonable"). Signed-off-by: David Howells Acked-by: Chas Williams Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- net/atm/mpc.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/net/atm/mpc.c b/net/atm/mpc.c index 4fccaa1e07b..11b16d16661 100644 --- a/net/atm/mpc.c +++ b/net/atm/mpc.c @@ -62,11 +62,13 @@ static void MPOA_cache_impos_rcvd(struct k_message *msg, struct mpoa_client *mpc static void set_mpc_ctrl_addr_rcvd(struct k_message *mesg, struct mpoa_client *mpc); static void set_mps_mac_addr_rcvd(struct k_message *mesg, struct mpoa_client *mpc); -static uint8_t *copy_macs(struct mpoa_client *mpc, uint8_t *router_mac, - uint8_t *tlvs, uint8_t mps_macs, uint8_t device_type); +static const uint8_t *copy_macs(struct mpoa_client *mpc, + const uint8_t *router_mac, + const uint8_t *tlvs, uint8_t mps_macs, + uint8_t device_type); static void purge_egress_shortcut(struct atm_vcc *vcc, eg_cache_entry *entry); -static void send_set_mps_ctrl_addr(char *addr, struct mpoa_client *mpc); +static void send_set_mps_ctrl_addr(const char *addr, struct mpoa_client *mpc); static void mpoad_close(struct atm_vcc *vcc); static int msg_from_mpoad(struct atm_vcc *vcc, struct sk_buff *skb); @@ -351,12 +353,12 @@ static const char *mpoa_device_type_string(char type) * lec sees a TLV it uses the pointer to call this function. * */ -static void lane2_assoc_ind(struct net_device *dev, uint8_t *mac_addr, - uint8_t *tlvs, uint32_t sizeoftlvs) +static void lane2_assoc_ind(struct net_device *dev, const u8 *mac_addr, + const u8 *tlvs, u32 sizeoftlvs) { uint32_t type; uint8_t length, mpoa_device_type, number_of_mps_macs; - uint8_t *end_of_tlvs; + const uint8_t *end_of_tlvs; struct mpoa_client *mpc; mpoa_device_type = number_of_mps_macs = 0; /* silence gcc */ @@ -430,8 +432,10 @@ static void lane2_assoc_ind(struct net_device *dev, uint8_t *mac_addr, * plus the possible MAC address(es) to mpc->mps_macs. * For a freshly allocated MPOA client mpc->mps_macs == 0. */ -static uint8_t *copy_macs(struct mpoa_client *mpc, uint8_t *router_mac, - uint8_t *tlvs, uint8_t mps_macs, uint8_t device_type) +static const uint8_t *copy_macs(struct mpoa_client *mpc, + const uint8_t *router_mac, + const uint8_t *tlvs, uint8_t mps_macs, + uint8_t device_type) { int num_macs; num_macs = (mps_macs > 1) ? mps_macs : 1; @@ -811,7 +815,7 @@ static int atm_mpoa_mpoad_attach (struct atm_vcc *vcc, int arg) return arg; } -static void send_set_mps_ctrl_addr(char *addr, struct mpoa_client *mpc) +static void send_set_mps_ctrl_addr(const char *addr, struct mpoa_client *mpc) { struct k_message mesg; -- GitLab From 849e8caa477d72cf153e5c0b6ce0c00b89738abb Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 30 Jul 2008 16:33:05 -0700 Subject: [PATCH 0452/1024] atm: fix direct casts of pointers to u32 in the InterPhase driver Fix direct casts of pointers to u32 in the InterPhase ATM driver. These are all arguments being passed to printk() calls. So drop the cast and change the %x to a %p. Signed-off-by: David Howells Acked-by: Chas Williams Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/atm/iphase.c | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 24df73ad326..088885ed51b 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -156,8 +156,8 @@ static void ia_hack_tcq(IADEV *dev) { } iavcc_r->vc_desc_cnt--; dev->desc_tbl[desc1 -1].timestamp = 0; - IF_EVENT(printk("ia_hack: return_q skb = 0x%x desc = %d\n", - (u32)dev->desc_tbl[desc1 -1].txskb, desc1);) + IF_EVENT(printk("ia_hack: return_q skb = 0x%p desc = %d\n", + dev->desc_tbl[desc1 -1].txskb, desc1);) if (iavcc_r->pcr < dev->rate_limit) { IA_SKB_STATE (dev->desc_tbl[desc1-1].txskb) |= IA_TX_DONE; if (ia_enque_rtn_q(&dev->tx_return_q, dev->desc_tbl[desc1 -1]) < 0) @@ -527,8 +527,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) { inc = 0; testSlot = idealSlot; TstSchedTbl = (u16*)(SchedTbl+testSlot); //set index and read in value - IF_CBR(printk("CBR Testslot 0x%x AT Location 0x%x, NumToAssign=%d\n", - testSlot, (u32)TstSchedTbl,toBeAssigned);) + IF_CBR(printk("CBR Testslot 0x%x AT Location 0x%p, NumToAssign=%d\n", + testSlot, TstSchedTbl,toBeAssigned);) memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC)); while (cbrVC) // If another VC at this location, we have to keep looking { @@ -536,8 +536,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) { testSlot = idealSlot - inc; if (testSlot < 0) { // Wrap if necessary testSlot += dev->CbrTotEntries; - IF_CBR(printk("Testslot Wrap. STable Start=0x%x,Testslot=%d\n", - (u32)SchedTbl,testSlot);) + IF_CBR(printk("Testslot Wrap. STable Start=0x%p,Testslot=%d\n", + SchedTbl,testSlot);) } TstSchedTbl = (u16 *)(SchedTbl + testSlot); // set table index memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC)); @@ -552,8 +552,8 @@ static int ia_cbr_setup (IADEV *dev, struct atm_vcc *vcc) { } // set table index and read in value TstSchedTbl = (u16*)(SchedTbl + testSlot); - IF_CBR(printk("Reading CBR Tbl from 0x%x, CbrVal=0x%x Iteration %d\n", - (u32)TstSchedTbl,cbrVC,inc);) + IF_CBR(printk("Reading CBR Tbl from 0x%p, CbrVal=0x%x Iteration %d\n", + TstSchedTbl,cbrVC,inc);) memcpy((caddr_t)&cbrVC,(caddr_t)TstSchedTbl,sizeof(cbrVC)); } /* while */ // Move this VCI number into this location of the CBR Sched table. @@ -1427,11 +1427,11 @@ static int rx_init(struct atm_dev *dev) /* We know this is 32bit bus addressed so the following is safe */ writel(iadev->rx_dle_dma & 0xfffff000, iadev->dma + IPHASE5575_RX_LIST_ADDR); - IF_INIT(printk("Tx Dle list addr: 0x%08x value: 0x%0x\n", - (u32)(iadev->dma+IPHASE5575_TX_LIST_ADDR), + IF_INIT(printk("Tx Dle list addr: 0x%p value: 0x%0x\n", + iadev->dma+IPHASE5575_TX_LIST_ADDR, *(u32*)(iadev->dma+IPHASE5575_TX_LIST_ADDR)); - printk("Rx Dle list addr: 0x%08x value: 0x%0x\n", - (u32)(iadev->dma+IPHASE5575_RX_LIST_ADDR), + printk("Rx Dle list addr: 0x%p value: 0x%0x\n", + iadev->dma+IPHASE5575_RX_LIST_ADDR, *(u32*)(iadev->dma+IPHASE5575_RX_LIST_ADDR));) writew(0xffff, iadev->reass_reg+REASS_MASK_REG); @@ -1470,7 +1470,7 @@ static int rx_init(struct atm_dev *dev) buf_desc_ptr++; rx_pkt_start += iadev->rx_buf_sz; } - IF_INIT(printk("Rx Buffer desc ptr: 0x%0x\n", (u32)(buf_desc_ptr));) + IF_INIT(printk("Rx Buffer desc ptr: 0x%p\n", buf_desc_ptr);) i = FREE_BUF_DESC_Q*iadev->memSize; writew(i >> 16, iadev->reass_reg+REASS_QUEUE_BASE); writew(i, iadev->reass_reg+FREEQ_ST_ADR); @@ -1487,7 +1487,7 @@ static int rx_init(struct atm_dev *dev) *freeq_start = (u_short)i; freeq_start++; } - IF_INIT(printk("freeq_start: 0x%0x\n", (u32)freeq_start);) + IF_INIT(printk("freeq_start: 0x%p\n", freeq_start);) /* Packet Complete Queue */ i = (PKT_COMP_Q * iadev->memSize) & 0xffff; writew(i, iadev->reass_reg+PCQ_ST_ADR); @@ -1713,7 +1713,7 @@ static void tx_dle_intr(struct atm_dev *dev) IA_SKB_STATE(skb) |= IA_DLED; skb_queue_tail(&iavcc->txing_skb, skb); } - IF_EVENT(printk("tx_dle_intr: enque skb = 0x%x \n", (u32)skb);) + IF_EVENT(printk("tx_dle_intr: enque skb = 0x%p \n", skb);) if (++dle == iadev->tx_dle_q.end) dle = iadev->tx_dle_q.start; } @@ -2044,8 +2044,8 @@ static int tx_init(struct atm_dev *dev) writew(tmp16, iadev->seg_reg+CBR_TAB_END+1); // CBR_PTR; tmp16 = (CBR_SCHED_TABLE*iadev->memSize + iadev->num_vc*6 - 2) >> 1; writew(tmp16, iadev->seg_reg+CBR_TAB_END); - IF_INIT(printk("iadev->seg_reg = 0x%x CBR_PTR_BASE = 0x%x\n", - (u32)iadev->seg_reg, readw(iadev->seg_reg+CBR_PTR_BASE));) + IF_INIT(printk("iadev->seg_reg = 0x%p CBR_PTR_BASE = 0x%x\n", + iadev->seg_reg, readw(iadev->seg_reg+CBR_PTR_BASE));) IF_INIT(printk("CBR_TAB_BEG = 0x%x, CBR_TAB_END = 0x%x, CBR_PTR = 0x%x\n", readw(iadev->seg_reg+CBR_TAB_BEG), readw(iadev->seg_reg+CBR_TAB_END), readw(iadev->seg_reg+CBR_TAB_END+1));) @@ -2963,8 +2963,8 @@ static int ia_pkt_tx (struct atm_vcc *vcc, struct sk_buff *skb) { /* Put the packet in a tx buffer */ trailer = iadev->tx_buf[desc-1].cpcs; - IF_TX(printk("Sent: skb = 0x%x skb->data: 0x%x len: %d, desc: %d\n", - (u32)skb, (u32)skb->data, skb->len, desc);) + IF_TX(printk("Sent: skb = 0x%p skb->data: 0x%p len: %d, desc: %d\n", + skb, skb->data, skb->len, desc);) trailer->control = 0; /*big endian*/ trailer->length = ((skb->len & 0xff) << 8) | ((skb->len & 0xff00) >> 8); @@ -3181,7 +3181,7 @@ static int __devinit ia_init_one(struct pci_dev *pdev, } dev->dev_data = iadev; IF_INIT(printk(DEV_LABEL "registered at (itf :%d)\n", dev->number);) - IF_INIT(printk("dev_id = 0x%x iadev->LineRate = %d \n", (u32)dev, + IF_INIT(printk("dev_id = 0x%p iadev->LineRate = %d \n", dev, iadev->LineRate);) pci_set_drvdata(pdev, dev); -- GitLab From 12dac0756d357325b107fe6ec24921ec38661839 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 30 Jul 2008 16:37:33 -0700 Subject: [PATCH 0453/1024] tg3: adapt tg3 to use reworked PCI PM code Adapt the tg3 driver to use the reworked PCI PM and make it use the exported PCI PM core functions instead of accessing the PCI PM registers directly by itself. Signed-off-by: Rafael J. Wysocki Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/tg3.c | 67 ++++++++++++++++++++--------------------------- 1 file changed, 28 insertions(+), 39 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 633c128a622..26aa37aa531 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1982,8 +1982,6 @@ static void tg3_power_down_phy(struct tg3 *tp) static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) { u32 misc_host_ctrl; - u16 power_control, power_caps; - int pm = tp->pm_cap; /* Make sure register accesses (indirect or otherwise) * will function correctly. @@ -1992,18 +1990,10 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) TG3PCI_MISC_HOST_CTRL, tp->misc_host_ctrl); - pci_read_config_word(tp->pdev, - pm + PCI_PM_CTRL, - &power_control); - power_control |= PCI_PM_CTRL_PME_STATUS; - power_control &= ~(PCI_PM_CTRL_STATE_MASK); switch (state) { case PCI_D0: - power_control |= 0; - pci_write_config_word(tp->pdev, - pm + PCI_PM_CTRL, - power_control); - udelay(100); /* Delay after power state change */ + pci_enable_wake(tp->pdev, state, false); + pci_set_power_state(tp->pdev, PCI_D0); /* Switch out of Vaux if it is a NIC */ if (tp->tg3_flags2 & TG3_FLG2_IS_NIC) @@ -2012,26 +2002,15 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) return 0; case PCI_D1: - power_control |= 1; - break; - case PCI_D2: - power_control |= 2; - break; - case PCI_D3hot: - power_control |= 3; break; default: - printk(KERN_WARNING PFX "%s: Invalid power state (%d) " - "requested.\n", - tp->dev->name, state); + printk(KERN_ERR PFX "%s: Invalid power state (D%d) requested\n", + tp->dev->name, state); return -EINVAL; } - - power_control |= PCI_PM_CTRL_PME_ENABLE; - misc_host_ctrl = tr32(TG3PCI_MISC_HOST_CTRL); tw32(TG3PCI_MISC_HOST_CTRL, misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT); @@ -2109,8 +2088,6 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) WOL_DRV_WOL | WOL_SET_MAGIC_PKT); - pci_read_config_word(tp->pdev, pm + PCI_PM_PMC, &power_caps); - if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE) { u32 mac_mode; @@ -2143,8 +2120,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) if (!(tp->tg3_flags2 & TG3_FLG2_5750_PLUS)) tw32(MAC_LED_CTRL, tp->led_ctrl); - if (((power_caps & PCI_PM_CAP_PME_D3cold) && - (tp->tg3_flags & TG3_FLAG_WOL_ENABLE))) + if (pci_pme_capable(tp->pdev, state) && + (tp->tg3_flags & TG3_FLAG_WOL_ENABLE)) mac_mode |= MAC_MODE_MAGIC_PKT_ENABLE; tw32_f(MAC_MODE, mac_mode); @@ -2236,9 +2213,11 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN); + if (tp->tg3_flags & TG3_FLAG_WOL_ENABLE) + pci_enable_wake(tp->pdev, state, true); + /* Finally, set the new power state. */ - pci_write_config_word(tp->pdev, pm + PCI_PM_CTRL, power_control); - udelay(100); /* Delay after power state change */ + pci_set_power_state(tp->pdev, state); return 0; } @@ -9065,7 +9044,8 @@ static void tg3_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct tg3 *tp = netdev_priv(dev); - if (tp->tg3_flags & TG3_FLAG_WOL_CAP) + if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) && + device_can_wakeup(&tp->pdev->dev)) wol->supported = WAKE_MAGIC; else wol->supported = 0; @@ -9078,18 +9058,22 @@ static void tg3_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) static int tg3_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct tg3 *tp = netdev_priv(dev); + struct device *dp = &tp->pdev->dev; if (wol->wolopts & ~WAKE_MAGIC) return -EINVAL; if ((wol->wolopts & WAKE_MAGIC) && - !(tp->tg3_flags & TG3_FLAG_WOL_CAP)) + !((tp->tg3_flags & TG3_FLAG_WOL_CAP) && device_can_wakeup(dp))) return -EINVAL; spin_lock_bh(&tp->lock); - if (wol->wolopts & WAKE_MAGIC) + if (wol->wolopts & WAKE_MAGIC) { tp->tg3_flags |= TG3_FLAG_WOL_ENABLE; - else + device_set_wakeup_enable(dp, true); + } else { tp->tg3_flags &= ~TG3_FLAG_WOL_ENABLE; + device_set_wakeup_enable(dp, false); + } spin_unlock_bh(&tp->lock); return 0; @@ -11296,7 +11280,8 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) if (val & VCPU_CFGSHDW_ASPM_DBNC) tp->tg3_flags |= TG3_FLAG_ASPM_WORKAROUND; if ((val & VCPU_CFGSHDW_WOL_ENABLE) && - (val & VCPU_CFGSHDW_WOL_MAGPKT)) + (val & VCPU_CFGSHDW_WOL_MAGPKT) && + device_may_wakeup(&tp->pdev->dev)) tp->tg3_flags |= TG3_FLAG_WOL_ENABLE; return; } @@ -11426,8 +11411,9 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) !(nic_cfg & NIC_SRAM_DATA_CFG_FIBER_WOL)) tp->tg3_flags &= ~TG3_FLAG_WOL_CAP; - if (tp->tg3_flags & TG3_FLAG_WOL_CAP && - nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE) + if ((tp->tg3_flags & TG3_FLAG_WOL_CAP) && + (nic_cfg & NIC_SRAM_DATA_CFG_WOL_ENABLE) && + device_may_wakeup(&tp->pdev->dev)) tp->tg3_flags |= TG3_FLAG_WOL_ENABLE; if (cfg2 & (1 << 17)) @@ -13613,6 +13599,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *dev = pci_get_drvdata(pdev); struct tg3 *tp = netdev_priv(dev); + pci_power_t target_state; int err; /* PCI register 4 needs to be saved whether netif_running() or not. @@ -13641,7 +13628,9 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE; tg3_full_unlock(tp); - err = tg3_set_power_state(tp, pci_choose_state(pdev, state)); + target_state = pdev->pm_cap ? pci_target_state(pdev) : PCI_D3hot; + + err = tg3_set_power_state(tp, target_state); if (err) { int err2; -- GitLab From 02137f2e80a4fb1481b2b1663d3d3795e705c5bc Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 30 Jul 2008 16:40:22 -0700 Subject: [PATCH 0454/1024] isdn: use the common ascii hex helpers Signed-off-by: Harvey Harrison Acked-by: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/gigaset/isocdata.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c index e30a7773f93..fbce5222d83 100644 --- a/drivers/isdn/gigaset/isocdata.c +++ b/drivers/isdn/gigaset/isocdata.c @@ -247,7 +247,6 @@ static inline void dump_bytes(enum debuglevel level, const char *tag, #ifdef CONFIG_GIGASET_DEBUG unsigned char c; static char dbgline[3 * 32 + 1]; - static const char hexdigit[] = "0123456789abcdef"; int i = 0; while (count-- > 0) { if (i > sizeof(dbgline) - 4) { @@ -258,8 +257,8 @@ static inline void dump_bytes(enum debuglevel level, const char *tag, c = *bytes++; dbgline[i] = (i && !(i % 12)) ? '-' : ' '; i++; - dbgline[i++] = hexdigit[(c >> 4) & 0x0f]; - dbgline[i++] = hexdigit[c & 0x0f]; + dbgline[i++] = hex_asc_hi(c); + dbgline[i++] = hex_asc_lo(c); } dbgline[i] = '\0'; gig_dbg(level, "%s:%s", tag, dbgline); -- GitLab From a7403e807d5f6431a09abb13a00f8170dac1da29 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 30 Jul 2008 16:48:05 -0700 Subject: [PATCH 0455/1024] hysdn: remove the packed attribute from PofTimStamp_tag Remove the packed attribute from PofTimStamp_tag in the hysdn driver as the thing being packed is just an array of chars and so is unpackable. This deals with a compiler warning: In file included from drivers/isdn/hysdn/hysdn_boot.c:19: drivers/isdn/hysdn/hysdn_pof.h:63: warning: 'packed' attribute ignored for field of type 'unsigned char[40]' Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hysdn/hysdn_pof.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/hysdn/hysdn_pof.h b/drivers/isdn/hysdn/hysdn_pof.h index a368d6caca0..3a72b908900 100644 --- a/drivers/isdn/hysdn/hysdn_pof.h +++ b/drivers/isdn/hysdn/hysdn_pof.h @@ -60,7 +60,7 @@ typedef struct PofRecHdr_tag { /* Pof record header */ typedef struct PofTimeStamp_tag { /*00 */ unsigned long UnixTime __attribute__((packed)); - /*04 */ unsigned char DateTimeText[0x28] __attribute__((packed)); + /*04 */ unsigned char DateTimeText[0x28]; /* =40 */ /*2C */ } tPofTimeStamp; -- GitLab From c9b23e0c302377ccff700bee663b878d04e4ef3a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 30 Jul 2008 16:49:52 -0700 Subject: [PATCH 0456/1024] sparc: Ignore drivers/video/console/promcon_tbl.c conmakehash generated file Add drivers/video/console/promcon_tbl.c to the list of ignored files. This file is generated by conmakehash against drivers/video/console/prom.uni. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/video/console/.gitignore | 2 ++ 1 file changed, 2 insertions(+) create mode 100644 drivers/video/console/.gitignore diff --git a/drivers/video/console/.gitignore b/drivers/video/console/.gitignore new file mode 100644 index 00000000000..0c258b45439 --- /dev/null +++ b/drivers/video/console/.gitignore @@ -0,0 +1,2 @@ +# conmakehash generated file +promcon_tbl.c -- GitLab From 5aa10cad69d282acfaf89d3c16ee07f9b279dbd2 Mon Sep 17 00:00:00 2001 From: Michael Frey Date: Wed, 30 Jul 2008 16:59:15 -0700 Subject: [PATCH 0457/1024] bluetooth: add quirks for a few hci_usb devices Preface: The "Broadcom" device is on unreleased hardware, so I can't disclose the actual model. When the Dell 370 and 410 BT adapters are put into BT radio mode, they need to be prepared like many other Broadcom adapters. Also, add quirk Broadcom 2046 devices with HCI_RESET. Reference for this bug: https://launchpad.net/bugs/249448 Signed-off-by: Michael Frey Signed-off-by: Mario Limonciello Signed-off-by: Tim Gardner Signed-off-by: Ben Collins Acked-by: Marcel Holtmann Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/bluetooth/hci_usb.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c index 192522ebb77..c33bb59ed1f 100644 --- a/drivers/bluetooth/hci_usb.c +++ b/drivers/bluetooth/hci_usb.c @@ -134,6 +134,13 @@ static struct usb_device_id blacklist_ids[] = { /* Dell laptop with Broadcom chip */ { USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, + /* Dell Wireless 370 */ + { USB_DEVICE(0x413c, 0x8156), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, + /* Dell Wireless 410 */ + { USB_DEVICE(0x413c, 0x8152), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, + + /* Broadcom 2046 */ + { USB_DEVICE(0x0a5c, 0x2151), .driver_info = HCI_RESET }, /* Microsoft Wireless Transceiver for Bluetooth 2.0 */ { USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET }, -- GitLab From 1fa98174ba980b2826edd1e4632a17916dfdb4fa Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 30 Jul 2008 17:00:38 -0700 Subject: [PATCH 0458/1024] nsc-ircc: default to dongle type 9 on IBM hardware This is necessary to set the dongle type on the nsc driver in order to get it to work correctly. Thinkpads all appear to use dongle type 9. This patch defaults nsc devices with an IBM PnP descriptor to use type 9. Signed-off-by: Matthew Garrett Signed-off-by: Ben Collins Signed-off-by: Andrew Morton --- drivers/net/irda/nsc-ircc.c | 7 +++++-- drivers/net/irda/nsc-ircc.h | 3 +++ 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index effc1ce8179..18d17143537 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -151,8 +151,8 @@ static char *dongle_types[] = { static chipio_t pnp_info; static const struct pnp_device_id nsc_ircc_pnp_table[] = { { .id = "NSC6001", .driver_data = 0 }, - { .id = "IBM0071", .driver_data = 0 }, { .id = "HWPC224", .driver_data = 0 }, + { .id = "IBM0071", .driver_data = NSC_FORCE_DONGLE_TYPE9 }, { } }; @@ -930,7 +930,10 @@ static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *i pnp_info.dma = -1; pnp_succeeded = 1; - /* There don't seem to be any way to get the cfg_base. + if (id->driver_data & NSC_FORCE_DONGLE_TYPE9) + dongle_id = 0x9; + + /* There doesn't seem to be any way of getting the cfg_base. * On my box, cfg_base is in the PnP descriptor of the * motherboard. Oh well... Jean II */ diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h index 29398a4f73f..71cd3c5a076 100644 --- a/drivers/net/irda/nsc-ircc.h +++ b/drivers/net/irda/nsc-ircc.h @@ -35,6 +35,9 @@ #include #include +/* Features for chips (set in driver_data) */ +#define NSC_FORCE_DONGLE_TYPE9 0x00000001 + /* DMA modes needed */ #define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */ #define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */ -- GitLab From a97a6f10771b90235b33c13a6db9279237a08422 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 30 Jul 2008 17:20:18 -0700 Subject: [PATCH 0459/1024] irda: replace __FUNCTION__ with __func__ __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/irda/act200l-sir.c | 10 +- drivers/net/irda/actisys-sir.c | 2 +- drivers/net/irda/ali-ircc.c | 246 +++++++++++++++--------------- drivers/net/irda/donauboe.c | 68 ++++----- drivers/net/irda/girbil-sir.c | 12 +- drivers/net/irda/irda-usb.c | 92 +++++------ drivers/net/irda/irtty-sir.c | 10 +- drivers/net/irda/kingsun-sir.c | 2 +- drivers/net/irda/litelink-sir.c | 8 +- drivers/net/irda/ma600-sir.c | 16 +- drivers/net/irda/mcp2120-sir.c | 12 +- drivers/net/irda/nsc-ircc.c | 112 +++++++------- drivers/net/irda/old_belkin-sir.c | 8 +- drivers/net/irda/sir_dev.c | 63 ++++---- drivers/net/irda/sir_dongle.c | 2 +- drivers/net/irda/smsc-ircc2.c | 120 +++++++-------- drivers/net/irda/tekram-sir.c | 10 +- drivers/net/irda/toim3232-sir.c | 10 +- drivers/net/irda/via-ircc.c | 80 +++++----- drivers/net/irda/vlsi_ir.c | 92 +++++------ drivers/net/irda/vlsi_ir.h | 2 +- drivers/net/irda/w83977af_ir.c | 62 ++++---- 22 files changed, 520 insertions(+), 519 deletions(-) diff --git a/drivers/net/irda/act200l-sir.c b/drivers/net/irda/act200l-sir.c index d8b89c74aab..37ab8c85571 100644 --- a/drivers/net/irda/act200l-sir.c +++ b/drivers/net/irda/act200l-sir.c @@ -107,7 +107,7 @@ static int act200l_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s()\n", __func__ ); /* Power on the dongle */ sirdev_set_dtr_rts(dev, TRUE, TRUE); @@ -124,7 +124,7 @@ static int act200l_open(struct sir_dev *dev) static int act200l_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s()\n", __func__ ); /* Power off the dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); @@ -143,7 +143,7 @@ static int act200l_change_speed(struct sir_dev *dev, unsigned speed) u8 control[3]; int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s()\n", __func__ ); /* Clear DTR and set RTS to enter command mode */ sirdev_set_dtr_rts(dev, FALSE, TRUE); @@ -212,7 +212,7 @@ static int act200l_reset(struct sir_dev *dev) }; int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s()\n", __func__ ); switch (state) { case SIRDEV_STATE_DONGLE_RESET: @@ -240,7 +240,7 @@ static int act200l_reset(struct sir_dev *dev) dev->speed = 9600; break; default: - IRDA_ERROR("%s(), unknown state %d\n", __FUNCTION__, state); + IRDA_ERROR("%s(), unknown state %d\n", __func__, state); ret = -1; break; } diff --git a/drivers/net/irda/actisys-sir.c b/drivers/net/irda/actisys-sir.c index 736d2473b7e..50b2141a610 100644 --- a/drivers/net/irda/actisys-sir.c +++ b/drivers/net/irda/actisys-sir.c @@ -165,7 +165,7 @@ static int actisys_change_speed(struct sir_dev *dev, unsigned speed) int ret = 0; int i = 0; - IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __FUNCTION__, + IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __func__, speed, dev->speed); /* dongle was already resetted from irda_request state machine, diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index 083b0dd70fe..2ff181861d2 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -152,7 +152,7 @@ static int __init ali_ircc_init(void) int reg, revision; int i = 0; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); ret = platform_driver_register(&ali_ircc_driver); if (ret) { @@ -166,7 +166,7 @@ static int __init ali_ircc_init(void) /* Probe for all the ALi chipsets we know about */ for (chip= chips; chip->name; chip++, i++) { - IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__, chip->name); + IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__, chip->name); /* Try all config registers for this chip */ for (cfg=0; cfg<2; cfg++) @@ -196,11 +196,11 @@ static int __init ali_ircc_init(void) if (reg == chip->cid_value) { - IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __FUNCTION__, cfg_base); + IRDA_DEBUG(2, "%s(), Chip found at 0x%03x\n", __func__, cfg_base); outb(0x1F, cfg_base); revision = inb(cfg_base+1); - IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(), Found %s chip, revision=%d\n", __func__, chip->name, revision); /* @@ -223,14 +223,14 @@ static int __init ali_ircc_init(void) } else { - IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __FUNCTION__, chip->name, cfg_base); + IRDA_DEBUG(2, "%s(), No %s chip at 0x%03x\n", __func__, chip->name, cfg_base); } /* Exit configuration */ outb(0xbb, cfg_base); } } - IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); if (ret) platform_driver_unregister(&ali_ircc_driver); @@ -248,7 +248,7 @@ static void __exit ali_ircc_cleanup(void) { int i; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); for (i=0; i < ARRAY_SIZE(dev_self); i++) { if (dev_self[i]) @@ -257,7 +257,7 @@ static void __exit ali_ircc_cleanup(void) platform_driver_unregister(&ali_ircc_driver); - IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); } /* @@ -273,11 +273,11 @@ static int ali_ircc_open(int i, chipio_t *info) int dongle_id; int err; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); if (i >= ARRAY_SIZE(dev_self)) { IRDA_ERROR("%s(), maximum number of supported chips reached!\n", - __FUNCTION__); + __func__); return -ENOMEM; } @@ -288,7 +288,7 @@ static int ali_ircc_open(int i, chipio_t *info) dev = alloc_irdadev(sizeof(*self)); if (dev == NULL) { IRDA_ERROR("%s(), can't allocate memory for control block!\n", - __FUNCTION__); + __func__); return -ENOMEM; } @@ -312,7 +312,7 @@ static int ali_ircc_open(int i, chipio_t *info) /* Reserve the ioports that we need */ if (!request_region(self->io.fir_base, self->io.fir_ext, ALI_IRCC_DRIVER_NAME)) { - IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __FUNCTION__, + IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", __func__, self->io.fir_base); err = -ENODEV; goto err_out1; @@ -370,19 +370,19 @@ static int ali_ircc_open(int i, chipio_t *info) err = register_netdev(dev); if (err) { - IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__); + IRDA_ERROR("%s(), register_netdev() failed!\n", __func__); goto err_out4; } IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name); /* Check dongle id */ dongle_id = ali_ircc_read_dongle_id(i, info); - IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __FUNCTION__, + IRDA_MESSAGE("%s(), %s, Found dongle: %s\n", __func__, ALI_IRCC_DRIVER_NAME, dongle_types[dongle_id]); self->io.dongle_id = dongle_id; - IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); return 0; @@ -411,7 +411,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self) { int iobase; - IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__); IRDA_ASSERT(self != NULL, return -1;); @@ -421,7 +421,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self) unregister_netdev(self->netdev); /* Release the PORT that this driver is using */ - IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __FUNCTION__, self->io.fir_base); + IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", __func__, self->io.fir_base); release_region(self->io.fir_base, self->io.fir_ext); if (self->tx_buff.head) @@ -435,7 +435,7 @@ static int __exit ali_ircc_close(struct ali_ircc_cb *self) dev_self[self->index] = NULL; free_netdev(self->netdev); - IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); return 0; } @@ -478,7 +478,7 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info) int cfg_base = info->cfg_base; int hi, low, reg; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); /* Enter Configuration */ outb(chip->entr1, cfg_base); @@ -497,13 +497,13 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info) info->sir_base = info->fir_base; - IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__, info->fir_base); + IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__, info->fir_base); /* Read IRQ control register */ outb(0x70, cfg_base); reg = inb(cfg_base+1); info->irq = reg & 0x0f; - IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq); + IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq); /* Read DMA channel */ outb(0x74, cfg_base); @@ -511,26 +511,26 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info) info->dma = reg & 0x07; if(info->dma == 0x04) - IRDA_WARNING("%s(), No DMA channel assigned !\n", __FUNCTION__); + IRDA_WARNING("%s(), No DMA channel assigned !\n", __func__); else - IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma); + IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma); /* Read Enabled Status */ outb(0x30, cfg_base); reg = inb(cfg_base+1); info->enabled = (reg & 0x80) && (reg & 0x01); - IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __FUNCTION__, info->enabled); + IRDA_DEBUG(2, "%s(), probing enabled=%d\n", __func__, info->enabled); /* Read Power Status */ outb(0x22, cfg_base); reg = inb(cfg_base+1); info->suspended = (reg & 0x20); - IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __FUNCTION__, info->suspended); + IRDA_DEBUG(2, "%s(), probing suspended=%d\n", __func__, info->suspended); /* Exit configuration */ outb(0xbb, cfg_base); - IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End -----------------\n", __func__); return 0; } @@ -548,7 +548,7 @@ static int ali_ircc_setup(chipio_t *info) int version; int iobase = info->fir_base; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); /* Locking comments : * Most operations here need to be protected. We are called before @@ -609,7 +609,7 @@ static int ali_ircc_setup(chipio_t *info) // outb(UART_IER_RDI, iobase+UART_IER); //benjamin 2000/11/23 01:25PM // Turn on the interrupts in ali_ircc_net_open - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__); return 0; } @@ -626,7 +626,7 @@ static int ali_ircc_read_dongle_id (int i, chipio_t *info) int dongle_id, reg; int cfg_base = info->cfg_base; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); /* Enter Configuration */ outb(chips[i].entr1, cfg_base); @@ -640,13 +640,13 @@ static int ali_ircc_read_dongle_id (int i, chipio_t *info) outb(0xf0, cfg_base); reg = inb(cfg_base+1); dongle_id = ((reg>>6)&0x02) | ((reg>>5)&0x01); - IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(), probing dongle_id=%d, dongle_types=%s\n", __func__, dongle_id, dongle_types[dongle_id]); /* Exit configuration */ outb(0xbb, cfg_base); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__); return dongle_id; } @@ -663,7 +663,7 @@ static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id) struct ali_ircc_cb *self; int ret; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); self = dev->priv; @@ -677,7 +677,7 @@ static irqreturn_t ali_ircc_interrupt(int irq, void *dev_id) spin_unlock(&self->lock); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__); return ret; } /* @@ -691,7 +691,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) __u8 eir, OldMessageCount; int iobase, tmp; - IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__); iobase = self->io.fir_base; @@ -704,10 +704,10 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) //self->ier = inb(iobase+FIR_IER); 2000/12/1 04:32PM eir = self->InterruptID & self->ier; /* Mask out the interesting ones */ - IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __FUNCTION__,self->InterruptID); - IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __FUNCTION__,self->LineStatus); - IRDA_DEBUG(1, "%s(), self->ier = %x\n", __FUNCTION__,self->ier); - IRDA_DEBUG(1, "%s(), eir = %x\n", __FUNCTION__,eir); + IRDA_DEBUG(1, "%s(), self->InterruptID = %x\n", __func__,self->InterruptID); + IRDA_DEBUG(1, "%s(), self->LineStatus = %x\n", __func__,self->LineStatus); + IRDA_DEBUG(1, "%s(), self->ier = %x\n", __func__,self->ier); + IRDA_DEBUG(1, "%s(), eir = %x\n", __func__,eir); /* Disable interrupts */ SetCOMInterrupts(self, FALSE); @@ -718,7 +718,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) { if (self->io.direction == IO_XMIT) /* TX */ { - IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Tx) *******\n", __func__); if(ali_ircc_dma_xmit_complete(self)) { @@ -737,23 +737,23 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) } else /* RX */ { - IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ******* IIR_EOM (Rx) *******\n", __func__); if(OldMessageCount > ((self->LineStatus+1) & 0x07)) { self->rcvFramesOverflow = TRUE; - IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******** \n", __func__); } if (ali_ircc_dma_receive_complete(self)) { - IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ******* receive complete ******** \n", __func__); self->ier = IER_EOM; } else { - IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ******* Not receive complete ******** \n", __func__); self->ier = IER_EOM | IER_TIMER; } @@ -766,7 +766,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) if(OldMessageCount > ((self->LineStatus+1) & 0x07)) { self->rcvFramesOverflow = TRUE; - IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ******* self->rcvFramesOverflow = TRUE ******* \n", __func__); } /* Disable Timer */ switch_bank(iobase, BANK1); @@ -798,7 +798,7 @@ static irqreturn_t ali_ircc_fir_interrupt(struct ali_ircc_cb *self) /* Restore Interrupt */ SetCOMInterrupts(self, TRUE); - IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), ----------------- End ---------------\n", __func__); return IRQ_RETVAL(eir); } @@ -813,7 +813,7 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self) int iobase; int iir, lsr; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); iobase = self->io.sir_base; @@ -822,13 +822,13 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self) /* Clear interrupt */ lsr = inb(iobase+UART_LSR); - IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __FUNCTION__, + IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __func__, iir, lsr, iobase); switch (iir) { case UART_IIR_RLSI: - IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), RLSI\n", __func__); break; case UART_IIR_RDI: /* Receive interrupt */ @@ -842,14 +842,14 @@ static irqreturn_t ali_ircc_sir_interrupt(struct ali_ircc_cb *self) } break; default: - IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __FUNCTION__, iir); + IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __func__, iir); break; } } - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__); return IRQ_RETVAL(iir); } @@ -866,7 +866,7 @@ static void ali_ircc_sir_receive(struct ali_ircc_cb *self) int boguscount = 0; int iobase; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__); IRDA_ASSERT(self != NULL, return;); iobase = self->io.sir_base; @@ -881,12 +881,12 @@ static void ali_ircc_sir_receive(struct ali_ircc_cb *self) /* Make sure we don't stay here too long */ if (boguscount++ > 32) { - IRDA_DEBUG(2,"%s(), breaking!\n", __FUNCTION__); + IRDA_DEBUG(2,"%s(), breaking!\n", __func__); break; } } while (inb(iobase+UART_LSR) & UART_LSR_DR); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); } /* @@ -903,7 +903,7 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self) IRDA_ASSERT(self != NULL, return;); - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); iobase = self->io.sir_base; @@ -922,16 +922,16 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self) { /* We must wait until all data are gone */ while(!(inb(iobase+UART_LSR) & UART_LSR_TEMT)) - IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), UART_LSR_THRE\n", __func__ ); - IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __FUNCTION__ , self->new_speed); + IRDA_DEBUG(1, "%s(), Changing speed! self->new_speed = %d\n", __func__ , self->new_speed); ali_ircc_change_speed(self, self->new_speed); self->new_speed = 0; // benjamin 2000/11/10 06:32PM if (self->io.speed > 115200) { - IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ali_ircc_change_speed from UART_LSR_TEMT \n", __func__ ); self->ier = IER_EOM; // SetCOMInterrupts(self, TRUE); @@ -949,7 +949,7 @@ static void ali_ircc_sir_write_wakeup(struct ali_ircc_cb *self) outb(UART_IER_RDI, iobase+UART_IER); } - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); } static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud) @@ -957,9 +957,9 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud) struct net_device *dev = self->netdev; int iobase; - IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); - IRDA_DEBUG(2, "%s(), setting speed = %d \n", __FUNCTION__ , baud); + IRDA_DEBUG(2, "%s(), setting speed = %d \n", __func__ , baud); /* This function *must* be called with irq off and spin-lock. * - Jean II */ @@ -998,7 +998,7 @@ static void ali_ircc_change_speed(struct ali_ircc_cb *self, __u32 baud) netif_wake_queue(self->netdev); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); } static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud) @@ -1008,14 +1008,14 @@ static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud) struct ali_ircc_cb *self = (struct ali_ircc_cb *) priv; struct net_device *dev; - IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(self != NULL, return;); dev = self->netdev; iobase = self->io.fir_base; - IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __FUNCTION__ ,self->io.speed,baud); + IRDA_DEBUG(1, "%s(), self->io.speed = %d, change to speed = %d\n", __func__ ,self->io.speed,baud); /* Come from SIR speed */ if(self->io.speed <=115200) @@ -1029,7 +1029,7 @@ static void ali_ircc_fir_change_speed(struct ali_ircc_cb *priv, __u32 baud) // Set Dongle Speed mode ali_ircc_change_dongle_speed(self, baud); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } /* @@ -1047,9 +1047,9 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed) int lcr; /* Line control reg */ int divisor; - IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); - IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __FUNCTION__ , speed); + IRDA_DEBUG(1, "%s(), Setting speed to: %d\n", __func__ , speed); IRDA_ASSERT(self != NULL, return;); @@ -1103,7 +1103,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed) spin_unlock_irqrestore(&self->lock, flags); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed) @@ -1113,14 +1113,14 @@ static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed) int iobase,dongle_id; int tmp = 0; - IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); iobase = self->io.fir_base; /* or iobase = self->io.sir_base; */ dongle_id = self->io.dongle_id; /* We are already locked, no need to do it again */ - IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __FUNCTION__ , dongle_types[dongle_id], speed); + IRDA_DEBUG(1, "%s(), Set Speed for %s , Speed = %d\n", __func__ , dongle_types[dongle_id], speed); switch_bank(iobase, BANK2); tmp = inb(iobase+FIR_IRDA_CR); @@ -1284,7 +1284,7 @@ static void ali_ircc_change_dongle_speed(struct ali_ircc_cb *priv, int speed) switch_bank(iobase, BANK0); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } /* @@ -1297,11 +1297,11 @@ static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len) { int actual = 0; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); /* Tx FIFO should be empty! */ if (!(inb(iobase+UART_LSR) & UART_LSR_THRE)) { - IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s(), failed, fifo not empty!\n", __func__ ); return 0; } @@ -1313,7 +1313,7 @@ static int ali_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len) actual++; } - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return actual; } @@ -1329,7 +1329,7 @@ static int ali_ircc_net_open(struct net_device *dev) int iobase; char hwname[32]; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(dev != NULL, return -1;); @@ -1375,7 +1375,7 @@ static int ali_ircc_net_open(struct net_device *dev) */ self->irlap = irlap_open(dev, &self->qos, hwname); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return 0; } @@ -1392,7 +1392,7 @@ static int ali_ircc_net_close(struct net_device *dev) struct ali_ircc_cb *self; //int iobase; - IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(4, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(dev != NULL, return -1;); @@ -1415,7 +1415,7 @@ static int ali_ircc_net_close(struct net_device *dev) free_irq(self->io.irq, dev); free_dma(self->io.dma); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return 0; } @@ -1434,7 +1434,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev) __u32 speed; int mtt, diff; - IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); self = (struct ali_ircc_cb *) dev->priv; iobase = self->io.fir_base; @@ -1488,7 +1488,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev) diff = self->now.tv_usec - self->stamp.tv_usec; /* self->stamp is set from ali_ircc_dma_receive_complete() */ - IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __FUNCTION__ , diff); + IRDA_DEBUG(1, "%s(), ******* diff = %d ******* \n", __func__ , diff); if (diff < 0) diff += 1000000; @@ -1510,7 +1510,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev) /* Adjust for timer resolution */ mtt = (mtt+250) / 500; /* 4 discard, 5 get advanced, Let's round off */ - IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __FUNCTION__ , mtt); + IRDA_DEBUG(1, "%s(), ************** mtt = %d ***********\n", __func__ , mtt); /* Setup timer */ if (mtt == 1) /* 500 us */ @@ -1567,7 +1567,7 @@ static int ali_ircc_fir_hard_xmit(struct sk_buff *skb, struct net_device *dev) spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); return 0; } @@ -1578,7 +1578,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self) unsigned char FIFO_OPTI, Hi, Lo; - IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); iobase = self->io.fir_base; @@ -1629,7 +1629,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self) tmp = inb(iobase+FIR_LCR_B); tmp &= ~0x20; // Disable SIP outb(((unsigned char)(tmp & 0x3f) | LCR_B_TX_MODE) & ~LCR_B_BW, iobase+FIR_LCR_B); - IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __FUNCTION__ , inb(iobase+FIR_LCR_B)); + IRDA_DEBUG(1, "%s(), ******* Change to TX mode: FIR_LCR_B = 0x%x ******* \n", __func__ , inb(iobase+FIR_LCR_B)); outb(0, iobase+FIR_LSR); @@ -1639,7 +1639,7 @@ static void ali_ircc_dma_xmit(struct ali_ircc_cb *self) switch_bank(iobase, BANK0); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self) @@ -1647,7 +1647,7 @@ static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self) int iobase; int ret = TRUE; - IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); iobase = self->io.fir_base; @@ -1660,7 +1660,7 @@ static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self) if((inb(iobase+FIR_LSR) & LSR_FRAME_ABORT) == LSR_FRAME_ABORT) { - IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __FUNCTION__); + IRDA_ERROR("%s(), ********* LSR_FRAME_ABORT *********\n", __func__); self->stats.tx_errors++; self->stats.tx_fifo_errors++; } @@ -1703,7 +1703,7 @@ static int ali_ircc_dma_xmit_complete(struct ali_ircc_cb *self) switch_bank(iobase, BANK0); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); return ret; } @@ -1718,7 +1718,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self) { int iobase, tmp; - IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); iobase = self->io.fir_base; @@ -1756,7 +1756,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self) //switch_bank(iobase, BANK0); tmp = inb(iobase+FIR_LCR_B); outb((unsigned char)(tmp &0x3f) | LCR_B_RX_MODE | LCR_B_BW , iobase + FIR_LCR_B); // 2000/12/1 05:16PM - IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __FUNCTION__ , inb(iobase+FIR_LCR_B)); + IRDA_DEBUG(1, "%s(), *** Change To RX mode: FIR_LCR_B = 0x%x *** \n", __func__ , inb(iobase+FIR_LCR_B)); /* Set Rx Threshold */ switch_bank(iobase, BANK1); @@ -1768,7 +1768,7 @@ static int ali_ircc_dma_receive(struct ali_ircc_cb *self) outb(CR_DMA_EN | CR_DMA_BURST, iobase+FIR_CR); switch_bank(iobase, BANK0); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); return 0; } @@ -1779,7 +1779,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) __u8 status, MessageCount; int len, i, iobase, val; - IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start -----------------\n", __func__ ); st_fifo = &self->st_fifo; iobase = self->io.fir_base; @@ -1788,7 +1788,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) MessageCount = inb(iobase+ FIR_LSR)&0x07; if (MessageCount > 0) - IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __FUNCTION__ , MessageCount); + IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount); for (i=0; i<=MessageCount; i++) { @@ -1801,11 +1801,11 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) len = len << 8; len |= inb(iobase+FIR_RX_DSR_LO); - IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __FUNCTION__ , len); - IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __FUNCTION__ , status); + IRDA_DEBUG(1, "%s(), RX Length = 0x%.2x,\n", __func__ , len); + IRDA_DEBUG(1, "%s(), RX Status = 0x%.2x,\n", __func__ , status); if (st_fifo->tail >= MAX_RX_WINDOW) { - IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s(), window is full!\n", __func__ ); continue; } @@ -1828,7 +1828,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) /* Check for errors */ if ((status & 0xd8) || self->rcvFramesOverflow || (len==0)) { - IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __FUNCTION__ ); + IRDA_DEBUG(0,"%s(), ************* RX Errors ************ \n", __func__ ); /* Skip frame */ self->stats.rx_errors++; @@ -1838,29 +1838,29 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) if (status & LSR_FIFO_UR) { self->stats.rx_frame_errors++; - IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __FUNCTION__ ); + IRDA_DEBUG(0,"%s(), ************* FIFO Errors ************ \n", __func__ ); } if (status & LSR_FRAME_ERROR) { self->stats.rx_frame_errors++; - IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __FUNCTION__ ); + IRDA_DEBUG(0,"%s(), ************* FRAME Errors ************ \n", __func__ ); } if (status & LSR_CRC_ERROR) { self->stats.rx_crc_errors++; - IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __FUNCTION__ ); + IRDA_DEBUG(0,"%s(), ************* CRC Errors ************ \n", __func__ ); } if(self->rcvFramesOverflow) { self->stats.rx_frame_errors++; - IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __FUNCTION__ ); + IRDA_DEBUG(0,"%s(), ************* Overran DMA buffer ************ \n", __func__ ); } if(len == 0) { self->stats.rx_frame_errors++; - IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __FUNCTION__ ); + IRDA_DEBUG(0,"%s(), ********** Receive Frame Size = 0 ********* \n", __func__ ); } } else @@ -1872,7 +1872,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) val = inb(iobase+FIR_BSR); if ((val& BSR_FIFO_NOT_EMPTY)== 0x80) { - IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s(), ************* BSR_FIFO_NOT_EMPTY ************ \n", __func__ ); /* Put this entry back in fifo */ st_fifo->head--; @@ -1909,7 +1909,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) { IRDA_WARNING("%s(), memory squeeze, " "dropping frame.\n", - __FUNCTION__); + __func__); self->stats.rx_dropped++; return FALSE; @@ -1937,7 +1937,7 @@ static int ali_ircc_dma_receive_complete(struct ali_ircc_cb *self) switch_bank(iobase, BANK0); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); return TRUE; } @@ -1956,7 +1956,7 @@ static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev) int iobase; __u32 speed; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(dev != NULL, return 0;); @@ -2005,7 +2005,7 @@ static int ali_ircc_sir_hard_xmit(struct sk_buff *skb, struct net_device *dev) dev_kfree_skb(skb); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return 0; } @@ -2024,7 +2024,7 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) unsigned long flags; int ret = 0; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); IRDA_ASSERT(dev != NULL, return -1;); @@ -2032,11 +2032,11 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) IRDA_ASSERT(self != NULL, return -1;); - IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd); + IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd); switch (cmd) { case SIOCSBANDWIDTH: /* Set bandwidth */ - IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), SIOCSBANDWIDTH\n", __func__ ); /* * This function will also be used by IrLAP to change the * speed, so we still must allow for speed change within @@ -2050,13 +2050,13 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) spin_unlock_irqrestore(&self->lock, flags); break; case SIOCSMEDIABUSY: /* Set media busy */ - IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), SIOCSMEDIABUSY\n", __func__ ); if (!capable(CAP_NET_ADMIN)) return -EPERM; irda_device_set_media_busy(self->netdev, TRUE); break; case SIOCGRECEIVING: /* Check if we are receiving right now */ - IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), SIOCGRECEIVING\n", __func__ ); /* This is protected */ irq->ifr_receiving = ali_ircc_is_receiving(self); break; @@ -2064,7 +2064,7 @@ static int ali_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) ret = -EOPNOTSUPP; } - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return ret; } @@ -2081,7 +2081,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self) int status = FALSE; int iobase; - IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ---------------- Start -----------------\n", __func__ ); IRDA_ASSERT(self != NULL, return FALSE;); @@ -2095,7 +2095,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self) if((inb(iobase+FIR_FIFO_FR) & 0x3f) != 0) { /* We are receiving something */ - IRDA_DEBUG(1, "%s(), We are receiving something\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), We are receiving something\n", __func__ ); status = TRUE; } switch_bank(iobase, BANK0); @@ -2107,7 +2107,7 @@ static int ali_ircc_is_receiving(struct ali_ircc_cb *self) spin_unlock_irqrestore(&self->lock, flags); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return status; } @@ -2116,9 +2116,9 @@ static struct net_device_stats *ali_ircc_net_get_stats(struct net_device *dev) { struct ali_ircc_cb *self = (struct ali_ircc_cb *) dev->priv; - IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ---------------- Start ----------------\n", __func__ ); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); return &self->stats; } @@ -2164,7 +2164,7 @@ static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable) int iobase = self->io.fir_base; /* or sir_base */ - IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __FUNCTION__ , enable); + IRDA_DEBUG(2, "%s(), -------- Start -------- ( Enable = %d )\n", __func__ , enable); /* Enable the interrupt which we wish to */ if (enable){ @@ -2205,14 +2205,14 @@ static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable) else outb(newMask, iobase+UART_IER); - IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(2, "%s(), ----------------- End ------------------\n", __func__ ); } static void SIR2FIR(int iobase) { //unsigned char tmp; - IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); /* Already protected (change_speed() or setup()), no need to lock. * Jean II */ @@ -2228,14 +2228,14 @@ static void SIR2FIR(int iobase) //tmp |= 0x20; //outb(tmp, iobase+FIR_LCR_B); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } static void FIR2SIR(int iobase) { unsigned char val; - IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ---------------- Start ----------------\n", __func__ ); /* Already protected (change_speed() or setup()), no need to lock. * Jean II */ @@ -2251,7 +2251,7 @@ static void FIR2SIR(int iobase) val = inb(iobase+UART_LSR); val = inb(iobase+UART_MSR); - IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __FUNCTION__ ); + IRDA_DEBUG(1, "%s(), ----------------- End ------------------\n", __func__ ); } MODULE_AUTHOR("Benjamin Kong "); diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c index 34ad189fff6..69d16b30323 100644 --- a/drivers/net/irda/donauboe.c +++ b/drivers/net/irda/donauboe.c @@ -245,7 +245,7 @@ toshoboe_dumpregs (struct toshoboe_cb *self) { __u32 ringbase; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); ringbase = INB (OBOE_RING_BASE0) << 10; ringbase |= INB (OBOE_RING_BASE1) << 18; @@ -293,7 +293,7 @@ static void toshoboe_disablebm (struct toshoboe_cb *self) { __u8 command; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); pci_read_config_byte (self->pdev, PCI_COMMAND, &command); command &= ~PCI_COMMAND_MASTER; @@ -305,7 +305,7 @@ toshoboe_disablebm (struct toshoboe_cb *self) static void toshoboe_stopchip (struct toshoboe_cb *self) { - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); /*Disable interrupts */ OUTB (0x0, OBOE_IER); @@ -350,7 +350,7 @@ toshoboe_setbaud (struct toshoboe_cb *self) __u16 pconfig = 0; __u8 config0l = 0; - IRDA_DEBUG (2, "%s(%d/%d)\n", __FUNCTION__, self->speed, self->io.speed); + IRDA_DEBUG (2, "%s(%d/%d)\n", __func__, self->speed, self->io.speed); switch (self->speed) { @@ -482,7 +482,7 @@ toshoboe_setbaud (struct toshoboe_cb *self) static void toshoboe_enablebm (struct toshoboe_cb *self) { - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); pci_set_master (self->pdev); } @@ -492,7 +492,7 @@ toshoboe_initring (struct toshoboe_cb *self) { int i; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); for (i = 0; i < TX_SLOTS; ++i) { @@ -550,7 +550,7 @@ toshoboe_startchip (struct toshoboe_cb *self) { __u32 physaddr; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); toshoboe_initring (self); toshoboe_enablebm (self); @@ -824,7 +824,7 @@ toshoboe_probe (struct toshoboe_cb *self) #endif unsigned long flags; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); if (request_irq (self->io.irq, toshoboe_probeinterrupt, self->io.irqflags, "toshoboe", (void *) self)) @@ -983,10 +983,10 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev) IRDA_ASSERT (self != NULL, return 0; ); - IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __FUNCTION__ + IRDA_DEBUG (1, "%s.tx:%x(%x)%x\n", __func__ ,skb->len,self->txpending,INB (OBOE_ENABLEH)); if (!cb->magic) { - IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __FUNCTION__, cb->magic); + IRDA_DEBUG (2, "%s.Not IrLAP:%x\n", __func__, cb->magic); #ifdef DUMP_PACKETS _dumpbufs(skb->data,skb->len,'>'); #endif @@ -1015,7 +1015,7 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev) { self->new_speed = speed; IRDA_DEBUG (1, "%s: Queued TxDone scheduled speed change %d\n" , - __FUNCTION__, speed); + __func__, speed); /* if no data, that's all! */ if (!skb->len) { @@ -1057,7 +1057,7 @@ toshoboe_hard_xmit (struct sk_buff *skb, struct net_device *dev) /* which we will add a wrong checksum to */ mtt = toshoboe_makemttpacket (self, self->tx_bufs[self->txs], mtt); - IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __FUNCTION__ + IRDA_DEBUG (1, "%s.mtt:%x(%x)%d\n", __func__ ,skb->len,mtt,self->txpending); if (mtt) { @@ -1101,7 +1101,7 @@ dumpbufs(skb->data,skb->len,'>'); if (self->ring->tx[self->txs].control & OBOE_CTL_TX_HW_OWNS) { - IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __FUNCTION__ + IRDA_DEBUG (0, "%s.ful:%x(%x)%x\n", __func__ ,skb->len, self->ring->tx[self->txs].control, self->txpending); toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX); spin_unlock_irqrestore(&self->spinlock, flags); @@ -1179,7 +1179,7 @@ toshoboe_interrupt (int irq, void *dev_id) if (self->ring->tx[i].control & OBOE_CTL_TX_HW_OWNS) self->txpending++; } - IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __FUNCTION__ + IRDA_DEBUG (1, "%s.txd(%x)%x/%x\n", __func__ ,irqstat,txp,self->txpending); txp = INB (OBOE_TXSLOT) & OBOE_SLOT_MASK; @@ -1209,7 +1209,7 @@ toshoboe_interrupt (int irq, void *dev_id) { self->speed = self->new_speed; IRDA_DEBUG (1, "%s: Executed TxDone scheduled speed change %d\n", - __FUNCTION__, self->speed); + __func__, self->speed); toshoboe_setbaud (self); } @@ -1224,7 +1224,7 @@ toshoboe_interrupt (int irq, void *dev_id) { int len = self->ring->rx[self->rxs].len; skb = NULL; - IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __FUNCTION__ + IRDA_DEBUG (3, "%s.rcv:%x(%x)\n", __func__ ,len,self->ring->rx[self->rxs].control); #ifdef DUMP_PACKETS @@ -1246,7 +1246,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<'); len -= 2; else len = 0; - IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __FUNCTION__, len,enable); + IRDA_DEBUG (1, "%s.SIR:%x(%x)\n", __func__, len,enable); } #ifdef USE_MIR @@ -1256,7 +1256,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<'); len -= 2; else len = 0; - IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __FUNCTION__, len,enable); + IRDA_DEBUG (2, "%s.MIR:%x(%x)\n", __func__, len,enable); } #endif else if (enable & OBOE_ENABLEH_FIRON) @@ -1265,10 +1265,10 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<'); len -= 4; /*FIXME: check this */ else len = 0; - IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __FUNCTION__, len,enable); + IRDA_DEBUG (1, "%s.FIR:%x(%x)\n", __func__, len,enable); } else - IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __FUNCTION__, len,enable); + IRDA_DEBUG (0, "%s.?IR:%x(%x)\n", __func__, len,enable); if (len) { @@ -1289,7 +1289,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<'); { printk (KERN_INFO "%s(), memory squeeze, dropping frame.\n", - __FUNCTION__); + __func__); } } } @@ -1301,7 +1301,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<'); /* (SIR) data is splitted in several slots. */ /* we have to join all the received buffers received */ /*in a large buffer before checking CRC. */ - IRDA_DEBUG (0, "%s.err:%x(%x)\n", __FUNCTION__ + IRDA_DEBUG (0, "%s.err:%x(%x)\n", __func__ ,len,self->ring->rx[self->rxs].control); } @@ -1329,7 +1329,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<'); if (irqstat & OBOE_INT_SIP) { self->int_sip++; - IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __FUNCTION__ + IRDA_DEBUG (1, "%s.sip:%x(%x)%x\n", __func__ ,self->int_sip,irqstat,self->txpending); } return IRQ_HANDLED; @@ -1343,7 +1343,7 @@ toshoboe_net_open (struct net_device *dev) unsigned long flags; int rc; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); self = netdev_priv(dev); @@ -1381,7 +1381,7 @@ toshoboe_net_close (struct net_device *dev) { struct toshoboe_cb *self; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); IRDA_ASSERT (dev != NULL, return -1; ); self = (struct toshoboe_cb *) dev->priv; @@ -1426,7 +1426,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) IRDA_ASSERT (self != NULL, return -1; ); - IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd); + IRDA_DEBUG (5, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd); /* Disable interrupts & save flags */ spin_lock_irqsave(&self->spinlock, flags); @@ -1438,7 +1438,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) * speed, so we still must allow for speed change within * interrupt context. */ - IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __FUNCTION__ + IRDA_DEBUG (1, "%s(BANDWIDTH), %s, (%X/%ld\n", __func__ ,dev->name, INB (OBOE_STATUS), irq->ifr_baudrate ); if (!in_interrupt () && !capable (CAP_NET_ADMIN)) { ret = -EPERM; @@ -1451,7 +1451,7 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) self->new_speed = irq->ifr_baudrate; break; case SIOCSMEDIABUSY: /* Set media busy */ - IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __FUNCTION__ + IRDA_DEBUG (1, "%s(MEDIABUSY), %s, (%X/%x)\n", __func__ ,dev->name, INB (OBOE_STATUS), capable (CAP_NET_ADMIN) ); if (!capable (CAP_NET_ADMIN)) { ret = -EPERM; @@ -1461,11 +1461,11 @@ toshoboe_net_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) break; case SIOCGRECEIVING: /* Check if we are receiving right now */ irq->ifr_receiving = (INB (OBOE_STATUS) & OBOE_STATUS_RXBUSY) ? 1 : 0; - IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __FUNCTION__ + IRDA_DEBUG (3, "%s(RECEIVING), %s, (%X/%x)\n", __func__ ,dev->name, INB (OBOE_STATUS), irq->ifr_receiving ); break; default: - IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd); + IRDA_DEBUG (1, "%s(?), %s, (cmd=0x%X)\n", __func__, dev->name, cmd); ret = -EOPNOTSUPP; } out: @@ -1492,7 +1492,7 @@ toshoboe_close (struct pci_dev *pci_dev) int i; struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev); - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); IRDA_ASSERT (self != NULL, return; ); @@ -1533,7 +1533,7 @@ toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid) int ok = 0; int err; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); if ((err=pci_enable_device(pci_dev))) return err; @@ -1700,7 +1700,7 @@ toshoboe_gotosleep (struct pci_dev *pci_dev, pm_message_t crap) unsigned long flags; int i = 10; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); if (!self || self->stopped) return 0; @@ -1728,7 +1728,7 @@ toshoboe_wakeup (struct pci_dev *pci_dev) struct toshoboe_cb *self = (struct toshoboe_cb*)pci_get_drvdata(pci_dev); unsigned long flags; - IRDA_DEBUG (4, "%s()\n", __FUNCTION__); + IRDA_DEBUG (4, "%s()\n", __func__); if (!self || !self->stopped) return 0; diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c index 738531b16bd..a31b8fa8aaa 100644 --- a/drivers/net/irda/girbil-sir.c +++ b/drivers/net/irda/girbil-sir.c @@ -86,7 +86,7 @@ static int girbil_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power on dongle */ sirdev_set_dtr_rts(dev, TRUE, TRUE); @@ -102,7 +102,7 @@ static int girbil_open(struct sir_dev *dev) static int girbil_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); @@ -126,7 +126,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed) u8 control[2]; static int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* dongle alread reset - port and dongle at default speed */ @@ -179,7 +179,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed) break; default: - IRDA_ERROR("%s - undefined state %d\n", __FUNCTION__, state); + IRDA_ERROR("%s - undefined state %d\n", __func__, state); ret = -EINVAL; break; } @@ -209,7 +209,7 @@ static int girbil_reset(struct sir_dev *dev) u8 control = GIRBIL_TXEN | GIRBIL_RXEN; int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); switch (state) { case SIRDEV_STATE_DONGLE_RESET: @@ -241,7 +241,7 @@ static int girbil_reset(struct sir_dev *dev) break; default: - IRDA_ERROR("%s(), undefined state %d\n", __FUNCTION__, state); + IRDA_ERROR("%s(), undefined state %d\n", __func__, state); ret = -1; break; } diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index 18b471cd144..b5d6b9ac162 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -177,12 +177,12 @@ static void irda_usb_build_header(struct irda_usb_cb *self, (!force) && (self->speed != -1)) { /* No speed and xbofs change here * (we'll do it later in the write callback) */ - IRDA_DEBUG(2, "%s(), not changing speed yet\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), not changing speed yet\n", __func__); *header = 0; return; } - IRDA_DEBUG(2, "%s(), changing speed to %d\n", __FUNCTION__, self->new_speed); + IRDA_DEBUG(2, "%s(), changing speed to %d\n", __func__, self->new_speed); self->speed = self->new_speed; /* We will do ` self->new_speed = -1; ' in the completion * handler just in case the current URB fail - Jean II */ @@ -228,7 +228,7 @@ static void irda_usb_build_header(struct irda_usb_cb *self, /* Set the negotiated additional XBOFS */ if (self->new_xbofs != -1) { - IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __FUNCTION__, self->new_xbofs); + IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __func__, self->new_xbofs); self->xbofs = self->new_xbofs; /* We will do ` self->new_xbofs = -1; ' in the completion * handler just in case the current URB fail - Jean II */ @@ -302,13 +302,13 @@ static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self) struct urb *urb; int ret; - IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __func__, self->new_speed, self->new_xbofs); /* Grab the speed URB */ urb = self->speed_urb; if (urb->status != 0) { - IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__); + IRDA_WARNING("%s(), URB still in use!\n", __func__); return; } @@ -334,7 +334,7 @@ static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self) /* Irq disabled -> GFP_ATOMIC */ if ((ret = usb_submit_urb(urb, GFP_ATOMIC))) { - IRDA_WARNING("%s(), failed Speed URB\n", __FUNCTION__); + IRDA_WARNING("%s(), failed Speed URB\n", __func__); } } @@ -347,7 +347,7 @@ static void speed_bulk_callback(struct urb *urb) { struct irda_usb_cb *self = urb->context; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* We should always have a context */ IRDA_ASSERT(self != NULL, return;); @@ -357,7 +357,7 @@ static void speed_bulk_callback(struct urb *urb) /* Check for timeout and other USB nasties */ if (urb->status != 0) { /* I get a lot of -ECONNABORTED = -103 here - Jean II */ - IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags); + IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags); /* Don't do anything here, that might confuse the USB layer. * Instead, we will wait for irda_usb_net_timeout(), the @@ -392,7 +392,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev) int res, mtt; int err = 1; /* Failed */ - IRDA_DEBUG(4, "%s() on %s\n", __FUNCTION__, netdev->name); + IRDA_DEBUG(4, "%s() on %s\n", __func__, netdev->name); netif_stop_queue(netdev); @@ -403,7 +403,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev) * We need to check self->present under the spinlock because * of irda_usb_disconnect() is synchronous - Jean II */ if (!self->present) { - IRDA_DEBUG(0, "%s(), Device is gone...\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), Device is gone...\n", __func__); goto drop; } @@ -437,7 +437,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev) } if (urb->status != 0) { - IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__); + IRDA_WARNING("%s(), URB still in use!\n", __func__); goto drop; } @@ -524,7 +524,7 @@ static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev) /* Ask USB to send the packet - Irq disabled -> GFP_ATOMIC */ if ((res = usb_submit_urb(urb, GFP_ATOMIC))) { - IRDA_WARNING("%s(), failed Tx URB\n", __FUNCTION__); + IRDA_WARNING("%s(), failed Tx URB\n", __func__); self->stats.tx_errors++; /* Let USB recover : We will catch that in the watchdog */ /*netif_start_queue(netdev);*/ @@ -556,7 +556,7 @@ static void write_bulk_callback(struct urb *urb) struct sk_buff *skb = urb->context; struct irda_usb_cb *self = ((struct irda_skb_cb *) skb->cb)->context; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* We should always have a context */ IRDA_ASSERT(self != NULL, return;); @@ -570,7 +570,7 @@ static void write_bulk_callback(struct urb *urb) /* Check for timeout and other USB nasties */ if (urb->status != 0) { /* I get a lot of -ECONNABORTED = -103 here - Jean II */ - IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags); + IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __func__, urb->status, urb->transfer_flags); /* Don't do anything here, that might confuse the USB layer, * and we could go in recursion and blow the kernel stack... @@ -589,7 +589,7 @@ static void write_bulk_callback(struct urb *urb) /* If the network is closed, stop everything */ if ((!self->netopen) || (!self->present)) { - IRDA_DEBUG(0, "%s(), Network is gone...\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), Network is gone...\n", __func__); spin_unlock_irqrestore(&self->lock, flags); return; } @@ -600,7 +600,7 @@ static void write_bulk_callback(struct urb *urb) (self->new_xbofs != self->xbofs)) { /* We haven't changed speed yet (because of * IUC_SPEED_BUG), so do it now - Jean II */ - IRDA_DEBUG(1, "%s(), Changing speed now...\n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__); irda_usb_change_speed_xbofs(self); } else { /* New speed and xbof is now commited in hardware */ @@ -632,7 +632,7 @@ static void irda_usb_net_timeout(struct net_device *netdev) struct urb *urb; int done = 0; /* If we have made any progress */ - IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __func__); IRDA_ASSERT(self != NULL, return;); /* Protect us from USB callbacks, net Tx and else. */ @@ -640,7 +640,7 @@ static void irda_usb_net_timeout(struct net_device *netdev) /* self->present *MUST* be read under spinlock */ if (!self->present) { - IRDA_WARNING("%s(), device not present!\n", __FUNCTION__); + IRDA_WARNING("%s(), device not present!\n", __func__); netif_stop_queue(netdev); spin_unlock_irqrestore(&self->lock, flags); return; @@ -763,7 +763,7 @@ static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, struc struct irda_skb_cb *cb; int ret; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* This should never happen */ IRDA_ASSERT(skb != NULL, return;); @@ -786,7 +786,7 @@ static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, struc /* If this ever happen, we are in deep s***. * Basically, the Rx path will stop... */ IRDA_WARNING("%s(), Failed to submit Rx URB %d\n", - __FUNCTION__, ret); + __func__, ret); } } @@ -807,7 +807,7 @@ static void irda_usb_receive(struct urb *urb) struct urb *next_urb; unsigned int len, docopy; - IRDA_DEBUG(2, "%s(), len=%d\n", __FUNCTION__, urb->actual_length); + IRDA_DEBUG(2, "%s(), len=%d\n", __func__, urb->actual_length); /* Find ourselves */ cb = (struct irda_skb_cb *) skb->cb; @@ -817,7 +817,7 @@ static void irda_usb_receive(struct urb *urb) /* If the network is closed or the device gone, stop everything */ if ((!self->netopen) || (!self->present)) { - IRDA_DEBUG(0, "%s(), Network is gone!\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), Network is gone!\n", __func__); /* Don't re-submit the URB : will stall the Rx path */ return; } @@ -840,7 +840,7 @@ static void irda_usb_receive(struct urb *urb) /* Usually precursor to a hot-unplug on OHCI. */ default: self->stats.rx_errors++; - IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __FUNCTION__, urb->status, urb->transfer_flags); + IRDA_DEBUG(0, "%s(), RX status %d, transfer_flags 0x%04X \n", __func__, urb->status, urb->transfer_flags); break; } /* If we received an error, we don't want to resubmit the @@ -861,7 +861,7 @@ static void irda_usb_receive(struct urb *urb) /* Check for empty frames */ if (urb->actual_length <= self->header_length) { - IRDA_WARNING("%s(), empty frame!\n", __FUNCTION__); + IRDA_WARNING("%s(), empty frame!\n", __func__); goto done; } @@ -967,7 +967,7 @@ static void irda_usb_rx_defer_expired(unsigned long data) struct irda_skb_cb *cb; struct urb *next_urb; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Find ourselves */ cb = (struct irda_skb_cb *) skb->cb; @@ -1053,7 +1053,7 @@ static int stir421x_fw_upload(struct irda_usb_cb *self, patch_block, block_size, &actual_len, msecs_to_jiffies(500)); IRDA_DEBUG(3,"%s(): Bulk send %u bytes, ret=%d\n", - __FUNCTION__, actual_len, ret); + __func__, actual_len, ret); if (ret < 0) break; @@ -1092,7 +1092,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self) /* We get a patch from userspace */ IRDA_MESSAGE("%s(): Received firmware %s (%zu bytes)\n", - __FUNCTION__, stir421x_fw_name, fw->size); + __func__, stir421x_fw_name, fw->size); ret = -EINVAL; @@ -1116,7 +1116,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self) + (build % 10); IRDA_DEBUG(3, "%s(): Firmware Product version %ld\n", - __FUNCTION__, fw_version); + __func__, fw_version); } } @@ -1172,7 +1172,7 @@ static int irda_usb_net_open(struct net_device *netdev) char hwname[16]; int i; - IRDA_DEBUG(1, "%s()\n", __FUNCTION__); + IRDA_DEBUG(1, "%s()\n", __func__); IRDA_ASSERT(netdev != NULL, return -1;); self = (struct irda_usb_cb *) netdev->priv; @@ -1182,13 +1182,13 @@ static int irda_usb_net_open(struct net_device *netdev) /* Can only open the device if it's there */ if(!self->present) { spin_unlock_irqrestore(&self->lock, flags); - IRDA_WARNING("%s(), device not present!\n", __FUNCTION__); + IRDA_WARNING("%s(), device not present!\n", __func__); return -1; } if(self->needspatch) { spin_unlock_irqrestore(&self->lock, flags); - IRDA_WARNING("%s(), device needs patch\n", __FUNCTION__) ; + IRDA_WARNING("%s(), device needs patch\n", __func__) ; return -EIO ; } @@ -1231,7 +1231,7 @@ static int irda_usb_net_open(struct net_device *netdev) /* If this ever happen, we are in deep s***. * Basically, we can't start the Rx path... */ IRDA_WARNING("%s(), Failed to allocate Rx skb\n", - __FUNCTION__); + __func__); return -1; } //skb_reserve(newskb, USB_IRDA_HEADER - 1); @@ -1254,7 +1254,7 @@ static int irda_usb_net_close(struct net_device *netdev) struct irda_usb_cb *self; int i; - IRDA_DEBUG(1, "%s()\n", __FUNCTION__); + IRDA_DEBUG(1, "%s()\n", __func__); IRDA_ASSERT(netdev != NULL, return -1;); self = (struct irda_usb_cb *) netdev->priv; @@ -1309,7 +1309,7 @@ static int irda_usb_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) self = dev->priv; IRDA_ASSERT(self != NULL, return -1;); - IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd); + IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd); switch (cmd) { case SIOCSBANDWIDTH: /* Set bandwidth */ @@ -1367,7 +1367,7 @@ static inline void irda_usb_init_qos(struct irda_usb_cb *self) { struct irda_class_desc *desc; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); desc = self->irda_desc; @@ -1384,7 +1384,7 @@ static inline void irda_usb_init_qos(struct irda_usb_cb *self) self->qos.data_size.bits = desc->bmDataSize; IRDA_DEBUG(0, "%s(), dongle says speed=0x%X, size=0x%X, window=0x%X, bofs=0x%X, turn=0x%X\n", - __FUNCTION__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits); + __func__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits); /* Don't always trust what the dongle tell us */ if(self->capability & IUC_SIR_ONLY) @@ -1419,7 +1419,7 @@ static inline int irda_usb_open(struct irda_usb_cb *self) { struct net_device *netdev = self->netdev; - IRDA_DEBUG(1, "%s()\n", __FUNCTION__); + IRDA_DEBUG(1, "%s()\n", __func__); irda_usb_init_qos(self); @@ -1442,7 +1442,7 @@ static inline int irda_usb_open(struct irda_usb_cb *self) */ static inline void irda_usb_close(struct irda_usb_cb *self) { - IRDA_DEBUG(1, "%s()\n", __FUNCTION__); + IRDA_DEBUG(1, "%s()\n", __func__); /* Remove netdevice */ unregister_netdev(self->netdev); @@ -1515,13 +1515,13 @@ static inline int irda_usb_parse_endpoints(struct irda_usb_cb *self, struct usb_ /* This is our interrupt endpoint */ self->bulk_int_ep = ep; } else { - IRDA_ERROR("%s(), Unrecognised endpoint %02X.\n", __FUNCTION__, ep); + IRDA_ERROR("%s(), Unrecognised endpoint %02X.\n", __func__, ep); } } } IRDA_DEBUG(0, "%s(), And our endpoints are : in=%02X, out=%02X (%d), int=%02X\n", - __FUNCTION__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep); + __func__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep); return((self->bulk_in_ep != 0) && (self->bulk_out_ep != 0)); } @@ -1583,7 +1583,7 @@ static inline struct irda_class_desc *irda_usb_find_class_desc(struct usb_interf 0, intf->altsetting->desc.bInterfaceNumber, desc, sizeof(*desc), 500); - IRDA_DEBUG(1, "%s(), ret=%d\n", __FUNCTION__, ret); + IRDA_DEBUG(1, "%s(), ret=%d\n", __func__, ret); if (ret < sizeof(*desc)) { IRDA_WARNING("usb-irda: class_descriptor read %s (%d)\n", (ret<0) ? "failed" : "too short", ret); @@ -1696,10 +1696,10 @@ static int irda_usb_probe(struct usb_interface *intf, /* Martin Diehl says if we get a -EPIPE we should * be fine and we don't need to do a usb_clear_halt(). * - Jean II */ - IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __func__); break; default: - IRDA_DEBUG(0, "%s(), Unknown error %d\n", __FUNCTION__, ret); + IRDA_DEBUG(0, "%s(), Unknown error %d\n", __func__, ret); ret = -EIO; goto err_out_3; } @@ -1708,7 +1708,7 @@ static int irda_usb_probe(struct usb_interface *intf, interface = intf->cur_altsetting; if(!irda_usb_parse_endpoints(self, interface->endpoint, interface->desc.bNumEndpoints)) { - IRDA_ERROR("%s(), Bogus endpoints...\n", __FUNCTION__); + IRDA_ERROR("%s(), Bogus endpoints...\n", __func__); ret = -EIO; goto err_out_3; } @@ -1815,7 +1815,7 @@ static void irda_usb_disconnect(struct usb_interface *intf) struct irda_usb_cb *self = usb_get_intfdata(intf); int i; - IRDA_DEBUG(1, "%s()\n", __FUNCTION__); + IRDA_DEBUG(1, "%s()\n", __func__); usb_set_intfdata(intf, NULL); if (!self) @@ -1865,7 +1865,7 @@ static void irda_usb_disconnect(struct usb_interface *intf) /* Free self and network device */ free_netdev(self->netdev); - IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __func__); } /*------------------------------------------------------------------*/ diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c index 9e33196f945..6bcee01c684 100644 --- a/drivers/net/irda/irtty-sir.c +++ b/drivers/net/irda/irtty-sir.c @@ -231,7 +231,7 @@ static void irtty_receive_buf(struct tty_struct *tty, const unsigned char *cp, dev = priv->dev; if (!dev) { - IRDA_WARNING("%s(), not ready yet!\n", __FUNCTION__); + IRDA_WARNING("%s(), not ready yet!\n", __func__); return; } @@ -388,7 +388,7 @@ static int irtty_ioctl(struct tty_struct *tty, struct file *file, unsigned int c IRDA_ASSERT(priv != NULL, return -ENODEV;); IRDA_ASSERT(priv->magic == IRTTY_MAGIC, return -EBADR;); - IRDA_DEBUG(3, "%s(cmd=0x%X)\n", __FUNCTION__, cmd); + IRDA_DEBUG(3, "%s(cmd=0x%X)\n", __func__, cmd); dev = priv->dev; IRDA_ASSERT(dev != NULL, return -1;); @@ -476,7 +476,7 @@ static int irtty_open(struct tty_struct *tty) mutex_unlock(&irtty_mutex); - IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __FUNCTION__, tty->name); + IRDA_DEBUG(0, "%s - %s: irda line discipline opened\n", __func__, tty->name); return 0; @@ -528,7 +528,7 @@ static void irtty_close(struct tty_struct *tty) kfree(priv); - IRDA_DEBUG(0, "%s - %s: irda line discipline closed\n", __FUNCTION__, tty->name); + IRDA_DEBUG(0, "%s - %s: irda line discipline closed\n", __func__, tty->name); } /* ------------------------------------------------------- */ @@ -566,7 +566,7 @@ static void __exit irtty_sir_cleanup(void) if ((err = tty_unregister_ldisc(N_IRDA))) { IRDA_ERROR("%s(), can't unregister line discipline (err = %d)\n", - __FUNCTION__, err); + __func__, err); } } diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c index 648e54b3f00..73fe83be34f 100644 --- a/drivers/net/irda/kingsun-sir.c +++ b/drivers/net/irda/kingsun-sir.c @@ -243,7 +243,7 @@ static void kingsun_rcv_irq(struct urb *urb) } } else if (urb->actual_length > 0) { err("%s(): Unexpected response length, expected %d got %d", - __FUNCTION__, kingsun->max_rx, urb->actual_length); + __func__, kingsun->max_rx, urb->actual_length); } /* This urb has already been filled in kingsun_net_open */ ret = usb_submit_urb(urb, GFP_ATOMIC); diff --git a/drivers/net/irda/litelink-sir.c b/drivers/net/irda/litelink-sir.c index 73261c54bbf..d6d9d2e5ad4 100644 --- a/drivers/net/irda/litelink-sir.c +++ b/drivers/net/irda/litelink-sir.c @@ -78,7 +78,7 @@ static int litelink_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power up dongle */ sirdev_set_dtr_rts(dev, TRUE, TRUE); @@ -95,7 +95,7 @@ static int litelink_open(struct sir_dev *dev) static int litelink_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); @@ -113,7 +113,7 @@ static int litelink_change_speed(struct sir_dev *dev, unsigned speed) { int i; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* dongle already reset by irda-thread - current speed (dongle and * port) is the default speed (115200 for litelink!) @@ -156,7 +156,7 @@ static int litelink_change_speed(struct sir_dev *dev, unsigned speed) */ static int litelink_reset(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* probably the power-up can be dropped here, but with only * 15 usec delay it's not worth the risk unless somebody with diff --git a/drivers/net/irda/ma600-sir.c b/drivers/net/irda/ma600-sir.c index 809906d9476..1ceed9cfb7c 100644 --- a/drivers/net/irda/ma600-sir.c +++ b/drivers/net/irda/ma600-sir.c @@ -67,13 +67,13 @@ static struct dongle_driver ma600 = { static int __init ma600_sir_init(void) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); return irda_register_dongle(&ma600); } static void __exit ma600_sir_cleanup(void) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); irda_unregister_dongle(&ma600); } @@ -88,7 +88,7 @@ static int ma600_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); sirdev_set_dtr_rts(dev, TRUE, TRUE); @@ -106,7 +106,7 @@ static int ma600_open(struct sir_dev *dev) static int ma600_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); @@ -176,7 +176,7 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed) { u8 byte; - IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __func__, speed, dev->speed); /* dongle already reset, dongle and port at default speed (9600) */ @@ -201,12 +201,12 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed) sirdev_raw_read(dev, &byte, sizeof(byte)); if (byte != get_control_byte(speed)) { IRDA_WARNING("%s(): bad control byte read-back %02x != %02x\n", - __FUNCTION__, (unsigned) byte, + __func__, (unsigned) byte, (unsigned) get_control_byte(speed)); return -1; } else - IRDA_DEBUG(2, "%s() control byte write read OK\n", __FUNCTION__); + IRDA_DEBUG(2, "%s() control byte write read OK\n", __func__); #endif /* Set DTR, Set RTS */ @@ -238,7 +238,7 @@ static int ma600_change_speed(struct sir_dev *dev, unsigned speed) int ma600_reset(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Reset the dongle : set DTR low for 10 ms */ sirdev_set_dtr_rts(dev, FALSE, TRUE); diff --git a/drivers/net/irda/mcp2120-sir.c b/drivers/net/irda/mcp2120-sir.c index 67bd016e4df..5e2f4859cee 100644 --- a/drivers/net/irda/mcp2120-sir.c +++ b/drivers/net/irda/mcp2120-sir.c @@ -63,7 +63,7 @@ static int mcp2120_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* seems no explicit power-on required here and reset switching it on anyway */ @@ -76,7 +76,7 @@ static int mcp2120_open(struct sir_dev *dev) static int mcp2120_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power off dongle */ /* reset and inhibit mcp2120 */ @@ -102,7 +102,7 @@ static int mcp2120_change_speed(struct sir_dev *dev, unsigned speed) u8 control[2]; static int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); switch (state) { case SIRDEV_STATE_DONGLE_SPEED: @@ -155,7 +155,7 @@ static int mcp2120_change_speed(struct sir_dev *dev, unsigned speed) break; default: - IRDA_ERROR("%s(), undefine state %d\n", __FUNCTION__, state); + IRDA_ERROR("%s(), undefine state %d\n", __func__, state); ret = -EINVAL; break; } @@ -187,7 +187,7 @@ static int mcp2120_reset(struct sir_dev *dev) unsigned delay = 0; int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); switch (state) { case SIRDEV_STATE_DONGLE_RESET: @@ -213,7 +213,7 @@ static int mcp2120_reset(struct sir_dev *dev) break; default: - IRDA_ERROR("%s(), undefined state %d\n", __FUNCTION__, state); + IRDA_ERROR("%s(), undefined state %d\n", __func__, state); ret = -EINVAL; break; } diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index 18d17143537..8583d951a6a 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -223,7 +223,7 @@ static int __init nsc_ircc_init(void) /* Probe for all the NSC chipsets we know about */ for (chip = chips; chip->name ; chip++) { - IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(), Probing for %s ...\n", __func__, chip->name); /* Try all config registers for this chip */ @@ -235,7 +235,7 @@ static int __init nsc_ircc_init(void) /* Read index register */ reg = inb(cfg_base); if (reg == 0xff) { - IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __FUNCTION__, cfg_base); + IRDA_DEBUG(2, "%s() no chip at 0x%03x\n", __func__, cfg_base); continue; } @@ -244,7 +244,7 @@ static int __init nsc_ircc_init(void) id = inb(cfg_base+1); if ((id & chip->cid_mask) == chip->cid_value) { IRDA_DEBUG(2, "%s() Found %s chip, revision=%d\n", - __FUNCTION__, chip->name, id & ~chip->cid_mask); + __func__, chip->name, id & ~chip->cid_mask); /* * If we found a correct PnP setting, @@ -295,7 +295,7 @@ static int __init nsc_ircc_init(void) } i++; } else { - IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __FUNCTION__, id); + IRDA_DEBUG(2, "%s(), Wrong chip id=0x%02x\n", __func__, id); } } } @@ -345,7 +345,7 @@ static int __init nsc_ircc_open(chipio_t *info) void *ret; int err, chip_index; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); for (chip_index = 0; chip_index < ARRAY_SIZE(dev_self); chip_index++) { @@ -354,7 +354,7 @@ static int __init nsc_ircc_open(chipio_t *info) } if (chip_index == ARRAY_SIZE(dev_self)) { - IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __FUNCTION__); + IRDA_ERROR("%s(), maximum number of supported chips reached!\n", __func__); return -ENOMEM; } @@ -369,7 +369,7 @@ static int __init nsc_ircc_open(chipio_t *info) dev = alloc_irdadev(sizeof(struct nsc_ircc_cb)); if (dev == NULL) { IRDA_ERROR("%s(), can't allocate memory for " - "control block!\n", __FUNCTION__); + "control block!\n", __func__); return -ENOMEM; } @@ -393,7 +393,7 @@ static int __init nsc_ircc_open(chipio_t *info) ret = request_region(self->io.fir_base, self->io.fir_ext, driver_name); if (!ret) { IRDA_WARNING("%s(), can't get iobase of 0x%03x\n", - __FUNCTION__, self->io.fir_base); + __func__, self->io.fir_base); err = -ENODEV; goto out1; } @@ -450,7 +450,7 @@ static int __init nsc_ircc_open(chipio_t *info) err = register_netdev(dev); if (err) { - IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__); + IRDA_ERROR("%s(), register_netdev() failed!\n", __func__); goto out4; } IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name); @@ -506,7 +506,7 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self) { int iobase; - IRDA_DEBUG(4, "%s()\n", __FUNCTION__); + IRDA_DEBUG(4, "%s()\n", __func__); IRDA_ASSERT(self != NULL, return -1;); @@ -519,7 +519,7 @@ static int __exit nsc_ircc_close(struct nsc_ircc_cb *self) /* Release the PORT that this driver is using */ IRDA_DEBUG(4, "%s(), Releasing Region %03x\n", - __FUNCTION__, self->io.fir_base); + __func__, self->io.fir_base); release_region(self->io.fir_base, self->io.fir_ext); if (self->tx_buff.head) @@ -557,7 +557,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info) case 0x2e8: outb(0x15, cfg_base+1); break; case 0x3f8: outb(0x16, cfg_base+1); break; case 0x2f8: outb(0x17, cfg_base+1); break; - default: IRDA_ERROR("%s(), invalid base_address", __FUNCTION__); + default: IRDA_ERROR("%s(), invalid base_address", __func__); } /* Control Signal Routing Register (CSRT) */ @@ -569,7 +569,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info) case 9: temp = 0x05; break; case 11: temp = 0x06; break; case 15: temp = 0x07; break; - default: IRDA_ERROR("%s(), invalid irq", __FUNCTION__); + default: IRDA_ERROR("%s(), invalid irq", __func__); } outb(CFG_108_CSRT, cfg_base); @@ -577,7 +577,7 @@ static int nsc_ircc_init_108(nsc_chip_t *chip, chipio_t *info) case 0: outb(0x08+temp, cfg_base+1); break; case 1: outb(0x10+temp, cfg_base+1); break; case 3: outb(0x18+temp, cfg_base+1); break; - default: IRDA_ERROR("%s(), invalid dma", __FUNCTION__); + default: IRDA_ERROR("%s(), invalid dma", __func__); } outb(CFG_108_MCTL, cfg_base); /* Mode Control Register (MCTL) */ @@ -616,7 +616,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info) break; } info->sir_base = info->fir_base; - IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(), probing fir_base=0x%03x\n", __func__, info->fir_base); /* Read control signals routing register (CSRT) */ @@ -649,7 +649,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info) info->irq = 15; break; } - IRDA_DEBUG(2, "%s(), probing irq=%d\n", __FUNCTION__, info->irq); + IRDA_DEBUG(2, "%s(), probing irq=%d\n", __func__, info->irq); /* Currently we only read Rx DMA but it will also be used for Tx */ switch ((reg >> 3) & 0x03) { @@ -666,7 +666,7 @@ static int nsc_ircc_probe_108(nsc_chip_t *chip, chipio_t *info) info->dma = 3; break; } - IRDA_DEBUG(2, "%s(), probing dma=%d\n", __FUNCTION__, info->dma); + IRDA_DEBUG(2, "%s(), probing dma=%d\n", __func__, info->dma); /* Read mode control register (MCTL) */ outb(CFG_108_MCTL, cfg_base); @@ -823,7 +823,7 @@ static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info) /* User is sure about his config... accept it. */ IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): " "io=0x%04x, irq=%d, dma=%d\n", - __FUNCTION__, info->fir_base, info->irq, info->dma); + __func__, info->fir_base, info->irq, info->dma); /* Access bank for SP2 */ outb(CFG_39X_LDN, cfg_base); @@ -864,7 +864,7 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info) int enabled, susp; IRDA_DEBUG(2, "%s(), nsc_ircc_probe_39x, base=%d\n", - __FUNCTION__, cfg_base); + __func__, cfg_base); /* This function should be executed with irq off to avoid * another driver messing with the Super I/O bank - Jean II */ @@ -898,7 +898,7 @@ static int nsc_ircc_probe_39x(nsc_chip_t *chip, chipio_t *info) outb(CFG_39X_SPC, cfg_base); susp = 1 - ((inb(cfg_base+1) & 0x02) >> 1); - IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __FUNCTION__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp); + IRDA_DEBUG(2, "%s(): io=0x%02x%02x, irq=%d (type %d), rxdma=%d, txdma=%d, enabled=%d (suspended=%d)\n", __func__, reg1,reg2,irq,irqt,dma1,dma2,enabled,susp); /* Configure SP2 */ @@ -950,7 +950,7 @@ static int nsc_ircc_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *i pnp_info.dma = pnp_dma(dev, 0); IRDA_DEBUG(0, "%s() : From PnP, found firbase 0x%03X ; irq %d ; dma %d.\n", - __FUNCTION__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma); + __func__, pnp_info.fir_base, pnp_info.irq, pnp_info.dma); if((pnp_info.fir_base == 0) || (pnp_info.irq == -1) || (pnp_info.dma == -1)) { @@ -979,7 +979,7 @@ static int nsc_ircc_setup(chipio_t *info) version = inb(iobase+MID); IRDA_DEBUG(2, "%s() Driver %s Found chip version %02x\n", - __FUNCTION__, driver_name, version); + __func__, driver_name, version); /* Should be 0x2? */ if (0x20 != (version & 0xf0)) { @@ -1083,30 +1083,30 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id) case 0x00: /* same as */ case 0x01: /* Differential serial interface */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x02: /* same as */ case 0x03: /* Reserved */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x04: /* Sharp RY5HD01 */ break; case 0x05: /* Reserved, but this is what the Thinkpad reports */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x06: /* Single-ended serial interface */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x07: /* Consumer-IR only */ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */ IRDA_DEBUG(0, "%s(), %s\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x09: /* IBM31T1100 or Temic TFDS6000/TFDS6500 */ outb(0x28, iobase+7); /* Set irsl[0-2] as output */ @@ -1114,7 +1114,7 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id) case 0x0A: /* same as */ case 0x0B: /* Reserved */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x0C: /* same as */ case 0x0D: /* HP HSDL-1100/HSDL-2100 */ @@ -1129,14 +1129,14 @@ static void nsc_ircc_init_dongle_interface (int iobase, int dongle_id) break; case 0x0F: /* No dongle connected */ IRDA_DEBUG(0, "%s(), %s\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); switch_bank(iobase, BANK0); outb(0x62, iobase+MCR); break; default: IRDA_DEBUG(0, "%s(), invalid dongle_id %#x", - __FUNCTION__, dongle_id); + __func__, dongle_id); } /* IRCFG1: IRSL1 and 2 are set to IrDA mode */ @@ -1168,30 +1168,30 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id) case 0x00: /* same as */ case 0x01: /* Differential serial interface */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x02: /* same as */ case 0x03: /* Reserved */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x04: /* Sharp RY5HD01 */ break; case 0x05: /* Reserved */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x06: /* Single-ended serial interface */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x07: /* Consumer-IR only */ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x08: /* HP HSDL-2300, HP HSDL-3600/HSDL-3610 */ IRDA_DEBUG(0, "%s(), %s\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); outb(0x00, iobase+4); if (speed > 115200) outb(0x01, iobase+4); @@ -1210,7 +1210,7 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id) case 0x0A: /* same as */ case 0x0B: /* Reserved */ IRDA_DEBUG(0, "%s(), %s not defined by irda yet\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); break; case 0x0C: /* same as */ case 0x0D: /* HP HSDL-1100/HSDL-2100 */ @@ -1219,13 +1219,13 @@ static void nsc_ircc_change_dongle_speed(int iobase, int speed, int dongle_id) break; case 0x0F: /* No dongle connected */ IRDA_DEBUG(0, "%s(), %s is not for IrDA mode\n", - __FUNCTION__, dongle_types[dongle_id]); + __func__, dongle_types[dongle_id]); switch_bank(iobase, BANK0); outb(0x62, iobase+MCR); break; default: - IRDA_DEBUG(0, "%s(), invalid data_rate\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), invalid data_rate\n", __func__); } /* Restore bank register */ outb(bank, iobase+BSR); @@ -1246,7 +1246,7 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed) __u8 bank; __u8 ier; /* Interrupt enable register */ - IRDA_DEBUG(2, "%s(), speed=%d\n", __FUNCTION__, speed); + IRDA_DEBUG(2, "%s(), speed=%d\n", __func__, speed); IRDA_ASSERT(self != NULL, return 0;); @@ -1279,20 +1279,20 @@ static __u8 nsc_ircc_change_speed(struct nsc_ircc_cb *self, __u32 speed) outb(inb(iobase+4) | 0x04, iobase+4); mcr = MCR_MIR; - IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__); break; case 1152000: mcr = MCR_MIR; - IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__); break; case 4000000: mcr = MCR_FIR; - IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__); break; default: mcr = MCR_FIR; IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", - __FUNCTION__, speed); + __func__, speed); break; } @@ -1597,7 +1597,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size) int actual = 0; __u8 bank; - IRDA_DEBUG(4, "%s()\n", __FUNCTION__); + IRDA_DEBUG(4, "%s()\n", __func__); /* Save current bank */ bank = inb(iobase+BSR); @@ -1605,7 +1605,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size) switch_bank(iobase, BANK0); if (!(inb_p(iobase+LSR) & LSR_TXEMP)) { IRDA_DEBUG(4, "%s(), warning, FIFO not empty yet!\n", - __FUNCTION__); + __func__); /* FIFO may still be filled to the Tx interrupt threshold */ fifo_size -= 17; @@ -1618,7 +1618,7 @@ static int nsc_ircc_pio_write(int iobase, __u8 *buf, int len, int fifo_size) } IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", - __FUNCTION__, fifo_size, actual, len); + __func__, fifo_size, actual, len); /* Restore bank */ outb(bank, iobase+BSR); @@ -1639,7 +1639,7 @@ static int nsc_ircc_dma_xmit_complete(struct nsc_ircc_cb *self) __u8 bank; int ret = TRUE; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); iobase = self->io.fir_base; @@ -1770,7 +1770,7 @@ static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase) len = inb(iobase+RFLFL) | ((inb(iobase+RFLFH) & 0x1f) << 8); if (st_fifo->tail >= MAX_RX_WINDOW) { - IRDA_DEBUG(0, "%s(), window is full!\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), window is full!\n", __func__); continue; } @@ -1862,7 +1862,7 @@ static int nsc_ircc_dma_receive_complete(struct nsc_ircc_cb *self, int iobase) if (skb == NULL) { IRDA_WARNING("%s(), memory squeeze, " "dropping frame.\n", - __FUNCTION__); + __func__); self->stats.rx_dropped++; /* Restore bank register */ @@ -1968,7 +1968,7 @@ static void nsc_ircc_sir_interrupt(struct nsc_ircc_cb *self, int eir) * Need to be after self->io.direction to avoid race with * nsc_ircc_hard_xmit_sir() - Jean II */ if (self->new_speed) { - IRDA_DEBUG(2, "%s(), Changing speed!\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), Changing speed!\n", __func__); self->ier = nsc_ircc_change_speed(self, self->new_speed); self->new_speed = 0; @@ -2054,7 +2054,7 @@ static void nsc_ircc_fir_interrupt(struct nsc_ircc_cb *self, int iobase, } else IRDA_WARNING("%s(), potential " "Tx queue lockup !\n", - __FUNCTION__); + __func__); } } else { /* Not finished yet, so interrupt on DMA again */ @@ -2163,7 +2163,7 @@ static int nsc_ircc_net_open(struct net_device *dev) char hwname[32]; __u8 bank; - IRDA_DEBUG(4, "%s()\n", __FUNCTION__); + IRDA_DEBUG(4, "%s()\n", __func__); IRDA_ASSERT(dev != NULL, return -1;); self = (struct nsc_ircc_cb *) dev->priv; @@ -2225,7 +2225,7 @@ static int nsc_ircc_net_close(struct net_device *dev) int iobase; __u8 bank; - IRDA_DEBUG(4, "%s()\n", __FUNCTION__); + IRDA_DEBUG(4, "%s()\n", __func__); IRDA_ASSERT(dev != NULL, return -1;); @@ -2279,7 +2279,7 @@ static int nsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) IRDA_ASSERT(self != NULL, return -1;); - IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd); + IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd); switch (cmd) { case SIOCSBANDWIDTH: /* Set bandwidth */ diff --git a/drivers/net/irda/old_belkin-sir.c b/drivers/net/irda/old_belkin-sir.c index 8c22c7374a2..75714bc7103 100644 --- a/drivers/net/irda/old_belkin-sir.c +++ b/drivers/net/irda/old_belkin-sir.c @@ -92,7 +92,7 @@ static int old_belkin_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power on dongle */ sirdev_set_dtr_rts(dev, TRUE, TRUE); @@ -110,7 +110,7 @@ static int old_belkin_open(struct sir_dev *dev) static int old_belkin_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); @@ -125,7 +125,7 @@ static int old_belkin_close(struct sir_dev *dev) */ static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); dev->speed = 9600; return (speed==dev->speed) ? 0 : -EINVAL; @@ -139,7 +139,7 @@ static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed) */ static int old_belkin_reset(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* This dongles speed "defaults" to 9600 bps ;-) */ dev->speed = 9600; diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c index 6078e03de9a..3f32909c24c 100644 --- a/drivers/net/irda/sir_dev.c +++ b/drivers/net/irda/sir_dev.c @@ -80,7 +80,7 @@ static int sirdev_tx_complete_fsm(struct sir_dev *dev) return 0; default: - IRDA_ERROR("%s - undefined state\n", __FUNCTION__); + IRDA_ERROR("%s - undefined state\n", __func__); return -EINVAL; } fsm->substate = next_state; @@ -107,11 +107,11 @@ static void sirdev_config_fsm(struct work_struct *work) int ret = -1; unsigned delay; - IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies); + IRDA_DEBUG(2, "%s(), <%ld>\n", __func__, jiffies); do { IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n", - __FUNCTION__, fsm->state, fsm->substate); + __func__, fsm->state, fsm->substate); next_state = fsm->state; delay = 0; @@ -249,12 +249,12 @@ static void sirdev_config_fsm(struct work_struct *work) break; default: - IRDA_ERROR("%s - undefined state\n", __FUNCTION__); + IRDA_ERROR("%s - undefined state\n", __func__); fsm->result = -EINVAL; /* fall thru */ case SIRDEV_STATE_ERROR: - IRDA_ERROR("%s - error: %d\n", __FUNCTION__, fsm->result); + IRDA_ERROR("%s - error: %d\n", __func__, fsm->result); #if 0 /* don't enable this before we have netdev->tx_timeout to recover */ netif_stop_queue(dev->netdev); @@ -284,11 +284,12 @@ int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned par { struct sir_fsm *fsm = &dev->fsm; - IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param); + IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __func__, + initial_state, param); if (down_trylock(&fsm->sem)) { if (in_interrupt() || in_atomic() || irqs_disabled()) { - IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__); + IRDA_DEBUG(1, "%s(), state machine busy!\n", __func__); return -EWOULDBLOCK; } else down(&fsm->sem); @@ -296,7 +297,7 @@ int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned par if (fsm->state == SIRDEV_STATE_DEAD) { /* race with sirdev_close should never happen */ - IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__); + IRDA_ERROR("%s(), instance staled!\n", __func__); up(&fsm->sem); return -ESTALE; /* or better EPIPE? */ } @@ -341,7 +342,7 @@ int sirdev_set_dongle(struct sir_dev *dev, IRDA_DONGLE type) { int err; - IRDA_DEBUG(3, "%s : requesting dongle %d.\n", __FUNCTION__, type); + IRDA_DEBUG(3, "%s : requesting dongle %d.\n", __func__, type); err = sirdev_schedule_dongle_open(dev, type); if (unlikely(err)) @@ -376,7 +377,7 @@ int sirdev_raw_write(struct sir_dev *dev, const char *buf, int len) ret = dev->drv->do_write(dev, dev->tx_buff.data, dev->tx_buff.len); if (ret > 0) { - IRDA_DEBUG(3, "%s(), raw-tx started\n", __FUNCTION__); + IRDA_DEBUG(3, "%s(), raw-tx started\n", __func__); dev->tx_buff.data += ret; dev->tx_buff.len -= ret; @@ -437,7 +438,7 @@ void sirdev_write_complete(struct sir_dev *dev) spin_lock_irqsave(&dev->tx_lock, flags); IRDA_DEBUG(3, "%s() - dev->tx_buff.len = %d\n", - __FUNCTION__, dev->tx_buff.len); + __func__, dev->tx_buff.len); if (likely(dev->tx_buff.len > 0)) { /* Write data left in transmit buffer */ @@ -450,7 +451,7 @@ void sirdev_write_complete(struct sir_dev *dev) else if (unlikely(actual<0)) { /* could be dropped later when we have tx_timeout to recover */ IRDA_ERROR("%s: drv->do_write failed (%d)\n", - __FUNCTION__, actual); + __func__, actual); if ((skb=dev->tx_skb) != NULL) { dev->tx_skb = NULL; dev_kfree_skb_any(skb); @@ -471,7 +472,7 @@ void sirdev_write_complete(struct sir_dev *dev) * restarted when the irda-thread has completed the request. */ - IRDA_DEBUG(3, "%s(), raw-tx done\n", __FUNCTION__); + IRDA_DEBUG(3, "%s(), raw-tx done\n", __func__); dev->raw_tx = 0; goto done; /* no post-frame handling in raw mode */ } @@ -488,7 +489,7 @@ void sirdev_write_complete(struct sir_dev *dev) * re-activated. */ - IRDA_DEBUG(5, "%s(), finished with frame!\n", __FUNCTION__); + IRDA_DEBUG(5, "%s(), finished with frame!\n", __func__); if ((skb=dev->tx_skb) != NULL) { dev->tx_skb = NULL; @@ -498,14 +499,14 @@ void sirdev_write_complete(struct sir_dev *dev) } if (unlikely(dev->new_speed > 0)) { - IRDA_DEBUG(5, "%s(), Changing speed!\n", __FUNCTION__); + IRDA_DEBUG(5, "%s(), Changing speed!\n", __func__); err = sirdev_schedule_speed(dev, dev->new_speed); if (unlikely(err)) { /* should never happen * forget the speed change and hope the stack recovers */ IRDA_ERROR("%s - schedule speed change failed: %d\n", - __FUNCTION__, err); + __func__, err); netif_wake_queue(dev->netdev); } /* else: success @@ -532,13 +533,13 @@ EXPORT_SYMBOL(sirdev_write_complete); int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count) { if (!dev || !dev->netdev) { - IRDA_WARNING("%s(), not ready yet!\n", __FUNCTION__); + IRDA_WARNING("%s(), not ready yet!\n", __func__); return -1; } if (!dev->irlap) { IRDA_WARNING("%s - too early: %p / %zd!\n", - __FUNCTION__, cp, count); + __func__, cp, count); return -1; } @@ -548,7 +549,7 @@ int sirdev_receive(struct sir_dev *dev, const unsigned char *cp, size_t count) */ irda_device_set_media_busy(dev->netdev, TRUE); dev->stats.rx_dropped++; - IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __FUNCTION__, count); + IRDA_DEBUG(0, "%s; rx-drop: %zd\n", __func__, count); return 0; } @@ -600,7 +601,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev) netif_stop_queue(ndev); - IRDA_DEBUG(3, "%s(), skb->len = %d\n", __FUNCTION__, skb->len); + IRDA_DEBUG(3, "%s(), skb->len = %d\n", __func__, skb->len); speed = irda_get_next_speed(skb); if ((speed != dev->speed) && (speed != -1)) { @@ -637,7 +638,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev) /* Check problems */ if(spin_is_locked(&dev->tx_lock)) { - IRDA_DEBUG(3, "%s(), write not completed\n", __FUNCTION__); + IRDA_DEBUG(3, "%s(), write not completed\n", __func__); } /* serialize with write completion */ @@ -666,7 +667,7 @@ static int sirdev_hard_xmit(struct sk_buff *skb, struct net_device *ndev) else if (unlikely(actual < 0)) { /* could be dropped later when we have tx_timeout to recover */ IRDA_ERROR("%s: drv->do_write failed (%d)\n", - __FUNCTION__, actual); + __func__, actual); dev_kfree_skb_any(skb); dev->stats.tx_errors++; dev->stats.tx_dropped++; @@ -687,7 +688,7 @@ static int sirdev_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) IRDA_ASSERT(dev != NULL, return -1;); - IRDA_DEBUG(3, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, ndev->name, cmd); + IRDA_DEBUG(3, "%s(), %s, (cmd=0x%X)\n", __func__, ndev->name, cmd); switch (cmd) { case SIOCSBANDWIDTH: /* Set bandwidth */ @@ -804,7 +805,7 @@ static int sirdev_open(struct net_device *ndev) if (!try_module_get(drv->owner)) return -ESTALE; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); if (sirdev_alloc_buffers(dev)) goto errout_dec; @@ -822,7 +823,7 @@ static int sirdev_open(struct net_device *ndev) netif_wake_queue(ndev); - IRDA_DEBUG(2, "%s - done, speed = %d\n", __FUNCTION__, dev->speed); + IRDA_DEBUG(2, "%s - done, speed = %d\n", __func__, dev->speed); return 0; @@ -842,7 +843,7 @@ static int sirdev_close(struct net_device *ndev) struct sir_dev *dev = ndev->priv; const struct sir_driver *drv; -// IRDA_DEBUG(0, "%s\n", __FUNCTION__); +// IRDA_DEBUG(0, "%s\n", __func__); netif_stop_queue(ndev); @@ -878,7 +879,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n struct net_device *ndev; struct sir_dev *dev; - IRDA_DEBUG(0, "%s - %s\n", __FUNCTION__, name); + IRDA_DEBUG(0, "%s - %s\n", __func__, name); /* instead of adding tests to protect against drv->do_write==NULL * at several places we refuse to create a sir_dev instance for @@ -892,7 +893,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n */ ndev = alloc_irdadev(sizeof(*dev)); if (ndev == NULL) { - IRDA_ERROR("%s - Can't allocate memory for IrDA control block!\n", __FUNCTION__); + IRDA_ERROR("%s - Can't allocate memory for IrDA control block!\n", __func__); goto out; } dev = ndev->priv; @@ -921,7 +922,7 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n ndev->do_ioctl = sirdev_ioctl; if (register_netdev(ndev)) { - IRDA_ERROR("%s(), register_netdev() failed!\n", __FUNCTION__); + IRDA_ERROR("%s(), register_netdev() failed!\n", __func__); goto out_freenetdev; } @@ -938,7 +939,7 @@ int sirdev_put_instance(struct sir_dev *dev) { int err = 0; - IRDA_DEBUG(0, "%s\n", __FUNCTION__); + IRDA_DEBUG(0, "%s\n", __func__); atomic_set(&dev->enable_rx, 0); @@ -948,7 +949,7 @@ int sirdev_put_instance(struct sir_dev *dev) if (dev->dongle_drv) err = sirdev_schedule_dongle_close(dev); if (err) - IRDA_ERROR("%s - error %d\n", __FUNCTION__, err); + IRDA_ERROR("%s - error %d\n", __func__, err); sirdev_close(dev->netdev); diff --git a/drivers/net/irda/sir_dongle.c b/drivers/net/irda/sir_dongle.c index 25d5b8a96bd..36030241f7a 100644 --- a/drivers/net/irda/sir_dongle.c +++ b/drivers/net/irda/sir_dongle.c @@ -36,7 +36,7 @@ int irda_register_dongle(struct dongle_driver *new) struct dongle_driver *drv; IRDA_DEBUG(0, "%s : registering dongle \"%s\" (%d).\n", - __FUNCTION__, new->driver_name, new->type); + __func__, new->driver_name, new->type); mutex_lock(&dongle_list_lock); list_for_each(entry, &dongle_list) { diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index 78dc8e7837f..b5360fe99d3 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -460,7 +460,7 @@ static int __init smsc_ircc_init(void) { int ret; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); ret = platform_driver_register(&smsc_ircc_driver); if (ret) { @@ -500,7 +500,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u struct net_device *dev; int err; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); err = smsc_ircc_present(fir_base, sir_base); if (err) @@ -508,7 +508,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u err = -ENOMEM; if (dev_count >= ARRAY_SIZE(dev_self)) { - IRDA_WARNING("%s(), too many devices!\n", __FUNCTION__); + IRDA_WARNING("%s(), too many devices!\n", __func__); goto err_out1; } @@ -517,7 +517,7 @@ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u */ dev = alloc_irdadev(sizeof(struct smsc_ircc_cb)); if (!dev) { - IRDA_WARNING("%s() can't allocate net device\n", __FUNCTION__); + IRDA_WARNING("%s() can't allocate net device\n", __func__); goto err_out1; } @@ -633,14 +633,14 @@ static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base) if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT, driver_name)) { IRDA_WARNING("%s: can't get fir_base of 0x%03x\n", - __FUNCTION__, fir_base); + __func__, fir_base); goto out1; } if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT, driver_name)) { IRDA_WARNING("%s: can't get sir_base of 0x%03x\n", - __FUNCTION__, sir_base); + __func__, sir_base); goto out2; } @@ -656,7 +656,7 @@ static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base) if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) { IRDA_WARNING("%s(), addr 0x%04x - no device found!\n", - __FUNCTION__, fir_base); + __func__, fir_base); goto out3; } IRDA_MESSAGE("SMsC IrDA Controller found\n IrCC version %d.%d, " @@ -793,7 +793,7 @@ static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd IRDA_ASSERT(self != NULL, return -1;); - IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd); + IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd); switch (cmd) { case SIOCSBANDWIDTH: /* Set bandwidth */ @@ -878,7 +878,7 @@ int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev) unsigned long flags; s32 speed; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); IRDA_ASSERT(dev != NULL, return 0;); @@ -953,21 +953,21 @@ static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed) ir_mode = IRCC_CFGA_IRDA_HDLC; ctrl = IRCC_CRC; fast = 0; - IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__); break; case 1152000: ir_mode = IRCC_CFGA_IRDA_HDLC; ctrl = IRCC_1152 | IRCC_CRC; fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA; IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", - __FUNCTION__); + __func__); break; case 4000000: ir_mode = IRCC_CFGA_IRDA_4PPM; ctrl = IRCC_CRC; fast = IRCC_LCR_A_FAST; IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", - __FUNCTION__); + __func__); break; } #if 0 @@ -995,7 +995,7 @@ static void smsc_ircc_fir_start(struct smsc_ircc_cb *self) struct net_device *dev; int fir_base; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); IRDA_ASSERT(self != NULL, return;); dev = self->netdev; @@ -1043,7 +1043,7 @@ static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self) { int fir_base; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); IRDA_ASSERT(self != NULL, return;); @@ -1067,7 +1067,7 @@ static void smsc_ircc_change_speed(struct smsc_ircc_cb *self, u32 speed) struct net_device *dev; int last_speed_was_sir; - IRDA_DEBUG(0, "%s() changing speed to: %d\n", __FUNCTION__, speed); + IRDA_DEBUG(0, "%s() changing speed to: %d\n", __func__, speed); IRDA_ASSERT(self != NULL, return;); dev = self->netdev; @@ -1135,7 +1135,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed) int lcr; /* Line control reg */ int divisor; - IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __FUNCTION__, speed); + IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __func__, speed); IRDA_ASSERT(self != NULL, return;); iobase = self->io.sir_base; @@ -1170,7 +1170,7 @@ void smsc_ircc_set_sir_speed(struct smsc_ircc_cb *self, __u32 speed) /* Turn on interrups */ outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); - IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed); + IRDA_DEBUG(2, "%s() speed changed to: %d\n", __func__, speed); } @@ -1253,7 +1253,7 @@ static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs) int iobase = self->io.fir_base; u8 ctrl; - IRDA_DEBUG(3, "%s\n", __FUNCTION__); + IRDA_DEBUG(3, "%s\n", __func__); #if 1 /* Disable Rx */ register_bank(iobase, 0); @@ -1307,7 +1307,7 @@ static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self) { int iobase = self->io.fir_base; - IRDA_DEBUG(3, "%s\n", __FUNCTION__); + IRDA_DEBUG(3, "%s\n", __func__); #if 0 /* Disable Tx */ register_bank(iobase, 0); @@ -1411,7 +1411,7 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self) register_bank(iobase, 0); - IRDA_DEBUG(3, "%s\n", __FUNCTION__); + IRDA_DEBUG(3, "%s\n", __func__); #if 0 /* Disable Rx */ register_bank(iobase, 0); @@ -1422,7 +1422,7 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self) lsr= inb(iobase + IRCC_LSR); msgcnt = inb(iobase + IRCC_LCR_B) & 0x08; - IRDA_DEBUG(2, "%s: dma count = %d\n", __FUNCTION__, + IRDA_DEBUG(2, "%s: dma count = %d\n", __func__, get_dma_residue(self->io.dma)); len = self->rx_buff.truesize - get_dma_residue(self->io.dma); @@ -1445,15 +1445,15 @@ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self) len -= self->io.speed < 4000000 ? 2 : 4; if (len < 2 || len > 2050) { - IRDA_WARNING("%s(), bogus len=%d\n", __FUNCTION__, len); + IRDA_WARNING("%s(), bogus len=%d\n", __func__, len); return; } - IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __FUNCTION__, msgcnt, len); + IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __func__, msgcnt, len); skb = dev_alloc_skb(len + 1); if (!skb) { IRDA_WARNING("%s(), memory squeeze, dropping frame.\n", - __FUNCTION__); + __func__); return; } /* Make sure IP header gets aligned */ @@ -1494,7 +1494,7 @@ static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self) /* Make sure we don't stay here to long */ if (boguscount++ > 32) { - IRDA_DEBUG(2, "%s(), breaking!\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), breaking!\n", __func__); break; } } while (inb(iobase + UART_LSR) & UART_LSR_DR); @@ -1536,7 +1536,7 @@ static irqreturn_t smsc_ircc_interrupt(int dummy, void *dev_id) lcra = inb(iobase + IRCC_LCR_A); lsr = inb(iobase + IRCC_LSR); - IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __FUNCTION__, iir); + IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __func__, iir); if (iir & IRCC_IIR_EOM) { if (self->io.direction == IO_RECV) @@ -1548,7 +1548,7 @@ static irqreturn_t smsc_ircc_interrupt(int dummy, void *dev_id) } if (iir & IRCC_IIR_ACTIVE_FRAME) { - /*printk(KERN_WARNING "%s(): Active Frame\n", __FUNCTION__);*/ + /*printk(KERN_WARNING "%s(): Active Frame\n", __func__);*/ } /* Enable interrupts again */ @@ -1587,11 +1587,11 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev) lsr = inb(iobase + UART_LSR); IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", - __FUNCTION__, iir, lsr, iobase); + __func__, iir, lsr, iobase); switch (iir) { case UART_IIR_RLSI: - IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(), RLSI\n", __func__); break; case UART_IIR_RDI: /* Receive interrupt */ @@ -1604,7 +1604,7 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev) break; default: IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", - __FUNCTION__, iir); + __func__, iir); break; } @@ -1631,11 +1631,11 @@ static int ircc_is_receiving(struct smsc_ircc_cb *self) int status = FALSE; /* int iobase; */ - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); IRDA_ASSERT(self != NULL, return FALSE;); - IRDA_DEBUG(0, "%s: dma count = %d\n", __FUNCTION__, + IRDA_DEBUG(0, "%s: dma count = %d\n", __func__, get_dma_residue(self->io.dma)); status = (self->rx_buff.state != OUTSIDE_FRAME); @@ -1652,7 +1652,7 @@ static int smsc_ircc_request_irq(struct smsc_ircc_cb *self) self->netdev->name, self->netdev); if (error) IRDA_DEBUG(0, "%s(), unable to allocate irq=%d, err=%d\n", - __FUNCTION__, self->io.irq, error); + __func__, self->io.irq, error); return error; } @@ -1696,21 +1696,21 @@ static int smsc_ircc_net_open(struct net_device *dev) struct smsc_ircc_cb *self; char hwname[16]; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); IRDA_ASSERT(dev != NULL, return -1;); self = netdev_priv(dev); IRDA_ASSERT(self != NULL, return 0;); if (self->io.suspended) { - IRDA_DEBUG(0, "%s(), device is suspended\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(), device is suspended\n", __func__); return -EAGAIN; } if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name, (void *) dev)) { IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n", - __FUNCTION__, self->io.irq); + __func__, self->io.irq); return -EAGAIN; } @@ -1734,7 +1734,7 @@ static int smsc_ircc_net_open(struct net_device *dev) smsc_ircc_net_close(dev); IRDA_WARNING("%s(), unable to allocate DMA=%d\n", - __FUNCTION__, self->io.dma); + __func__, self->io.dma); return -EAGAIN; } @@ -1753,7 +1753,7 @@ static int smsc_ircc_net_close(struct net_device *dev) { struct smsc_ircc_cb *self; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); IRDA_ASSERT(dev != NULL, return -1;); self = netdev_priv(dev); @@ -1836,7 +1836,7 @@ static int smsc_ircc_resume(struct platform_device *dev) */ static int __exit smsc_ircc_close(struct smsc_ircc_cb *self) { - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); IRDA_ASSERT(self != NULL, return -1;); @@ -1848,12 +1848,12 @@ static int __exit smsc_ircc_close(struct smsc_ircc_cb *self) smsc_ircc_stop_interrupts(self); /* Release the PORTS that this driver is using */ - IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__, + IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __func__, self->io.fir_base); release_region(self->io.fir_base, self->io.fir_ext); - IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__, + IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __func__, self->io.sir_base); release_region(self->io.sir_base, self->io.sir_ext); @@ -1875,7 +1875,7 @@ static void __exit smsc_ircc_cleanup(void) { int i; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); for (i = 0; i < 2; i++) { if (dev_self[i]) @@ -1899,7 +1899,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self) struct net_device *dev; int fir_base, sir_base; - IRDA_DEBUG(3, "%s\n", __FUNCTION__); + IRDA_DEBUG(3, "%s\n", __func__); IRDA_ASSERT(self != NULL, return;); dev = self->netdev; @@ -1926,7 +1926,7 @@ void smsc_ircc_sir_start(struct smsc_ircc_cb *self) /* Turn on interrups */ outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER); - IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__); + IRDA_DEBUG(3, "%s() - exit\n", __func__); outb(0x00, fir_base + IRCC_MASTER); } @@ -1936,7 +1936,7 @@ void smsc_ircc_sir_stop(struct smsc_ircc_cb *self) { int iobase; - IRDA_DEBUG(3, "%s\n", __FUNCTION__); + IRDA_DEBUG(3, "%s\n", __func__); iobase = self->io.sir_base; /* Reset UART */ @@ -1962,7 +1962,7 @@ static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self) IRDA_ASSERT(self != NULL, return;); - IRDA_DEBUG(4, "%s\n", __FUNCTION__); + IRDA_DEBUG(4, "%s\n", __func__); iobase = self->io.sir_base; @@ -1984,7 +1984,7 @@ static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self) */ if (self->new_speed) { IRDA_DEBUG(5, "%s(), Changing speed to %d.\n", - __FUNCTION__, self->new_speed); + __func__, self->new_speed); smsc_ircc_sir_wait_hw_transmitter_finish(self); smsc_ircc_change_speed(self, self->new_speed); self->new_speed = 0; @@ -2023,7 +2023,7 @@ static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len) /* Tx FIFO should be empty! */ if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) { - IRDA_WARNING("%s(), failed, fifo not empty!\n", __FUNCTION__); + IRDA_WARNING("%s(), failed, fifo not empty!\n", __func__); return 0; } @@ -2123,7 +2123,7 @@ static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self) udelay(1); if (count == 0) - IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__); + IRDA_DEBUG(0, "%s(): stuck transmitter\n", __func__); } @@ -2145,7 +2145,7 @@ static int __init smsc_ircc_look_for_chips(void) while (address->cfg_base) { cfg_base = address->cfg_base; - /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __FUNCTION__, cfg_base, address->type);*/ + /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __func__, cfg_base, address->type);*/ if (address->type & SMSCSIO_TYPE_FDC) { type = "FDC"; @@ -2184,7 +2184,7 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor u8 mode, dma, irq; int ret = -ENODEV; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL) return ret; @@ -2192,10 +2192,10 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase); mode = inb(cfgbase + 1); - /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __FUNCTION__, mode);*/ + /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __func__, mode);*/ if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA)) - IRDA_WARNING("%s(): IrDA not enabled\n", __FUNCTION__); + IRDA_WARNING("%s(): IrDA not enabled\n", __func__); outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase); sirbase = inb(cfgbase + 1) << 2; @@ -2212,7 +2212,7 @@ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned shor outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase); irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK; - IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __FUNCTION__, firbase, sirbase, dma, irq, mode); + IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __func__, firbase, sirbase, dma, irq, mode); if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0) ret = 0; @@ -2234,7 +2234,7 @@ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned sho unsigned short fir_io, sir_io; int ret = -ENODEV; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL) return ret; @@ -2268,7 +2268,7 @@ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned sho static int __init smsc_access(unsigned short cfg_base, unsigned char reg) { - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); outb(reg, cfg_base); return inb(cfg_base) != reg ? -1 : 0; @@ -2278,7 +2278,7 @@ static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, { u8 devid, xdevid, rev; - IRDA_DEBUG(1, "%s\n", __FUNCTION__); + IRDA_DEBUG(1, "%s\n", __func__); /* Leave configuration */ @@ -2353,7 +2353,7 @@ static int __init smsc_superio_fdc(unsigned short cfg_base) if (!request_region(cfg_base, 2, driver_name)) { IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n", - __FUNCTION__, cfg_base); + __func__, cfg_base); } else { if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") || !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC")) @@ -2371,7 +2371,7 @@ static int __init smsc_superio_lpc(unsigned short cfg_base) if (!request_region(cfg_base, 2, driver_name)) { IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n", - __FUNCTION__, cfg_base); + __func__, cfg_base); } else { if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") || !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC")) @@ -2932,7 +2932,7 @@ static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed) /* empty */; if (val) - IRDA_WARNING("%s(): ATC: 0x%02x\n", __FUNCTION__, + IRDA_WARNING("%s(): ATC: 0x%02x\n", __func__, inb(fir_base + IRCC_ATC)); } diff --git a/drivers/net/irda/tekram-sir.c b/drivers/net/irda/tekram-sir.c index d1ce5ae6a17..048a1542284 100644 --- a/drivers/net/irda/tekram-sir.c +++ b/drivers/net/irda/tekram-sir.c @@ -77,7 +77,7 @@ static int tekram_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); sirdev_set_dtr_rts(dev, TRUE, TRUE); @@ -92,7 +92,7 @@ static int tekram_open(struct sir_dev *dev) static int tekram_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); @@ -130,7 +130,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed) u8 byte; static int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); switch(state) { case SIRDEV_STATE_DONGLE_SPEED: @@ -179,7 +179,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed) break; default: - IRDA_ERROR("%s - undefined state %d\n", __FUNCTION__, state); + IRDA_ERROR("%s - undefined state %d\n", __func__, state); ret = -EINVAL; break; } @@ -204,7 +204,7 @@ static int tekram_change_speed(struct sir_dev *dev, unsigned speed) static int tekram_reset(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Clear DTR, Set RTS */ sirdev_set_dtr_rts(dev, FALSE, TRUE); diff --git a/drivers/net/irda/toim3232-sir.c b/drivers/net/irda/toim3232-sir.c index aa1a9b0ed83..fcf287b749d 100644 --- a/drivers/net/irda/toim3232-sir.c +++ b/drivers/net/irda/toim3232-sir.c @@ -181,7 +181,7 @@ static int toim3232_open(struct sir_dev *dev) { struct qos_info *qos = &dev->qos; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Pull the lines high to start with. * @@ -209,7 +209,7 @@ static int toim3232_open(struct sir_dev *dev) static int toim3232_close(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Power off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); @@ -241,7 +241,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed) u8 byte; static int ret = 0; - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); switch(state) { case SIRDEV_STATE_DONGLE_SPEED: @@ -299,7 +299,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed) break; default: - printk(KERN_ERR "%s - undefined state %d\n", __FUNCTION__, state); + printk(KERN_ERR "%s - undefined state %d\n", __func__, state); ret = -EINVAL; break; } @@ -344,7 +344,7 @@ static int toim3232_change_speed(struct sir_dev *dev, unsigned speed) static int toim3232_reset(struct sir_dev *dev) { - IRDA_DEBUG(2, "%s()\n", __FUNCTION__); + IRDA_DEBUG(2, "%s()\n", __func__); /* Switch off both DTR and RTS to switch off dongle */ sirdev_set_dtr_rts(dev, FALSE, FALSE); diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c index 04ad3573b15..84e609ea5fb 100644 --- a/drivers/net/irda/via-ircc.c +++ b/drivers/net/irda/via-ircc.c @@ -152,12 +152,12 @@ static int __init via_ircc_init(void) { int rc; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); rc = pci_register_driver(&via_driver); if (rc < 0) { IRDA_DEBUG(0, "%s(): error rc = %d, returning -ENODEV...\n", - __FUNCTION__, rc); + __func__, rc); return -ENODEV; } return 0; @@ -170,11 +170,11 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi u16 Chipset,FirDRQ1,FirDRQ0,FirIRQ,FirIOBase; chipio_t info; - IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __FUNCTION__, id->device); + IRDA_DEBUG(2, "%s(): Device ID=(0X%X)\n", __func__, id->device); rc = pci_enable_device (pcidev); if (rc) { - IRDA_DEBUG(0, "%s(): error rc = %d\n", __FUNCTION__, rc); + IRDA_DEBUG(0, "%s(): error rc = %d\n", __func__, rc); return -ENODEV; } @@ -185,7 +185,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi Chipset=0x3076; if (Chipset==0x3076) { - IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(): Chipset = 3076\n", __func__); WriteLPCReg(7,0x0c ); temp=ReadLPCReg(0x30);//check if BIOS Enable Fir @@ -222,7 +222,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi } else rc = -ENODEV; //IR not turn on } else { //Not VT1211 - IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __FUNCTION__); + IRDA_DEBUG(2, "%s(): Chipset = 3096\n", __func__); pci_read_config_byte(pcidev,0x67,&bTmp);//check if BIOS Enable Fir if((bTmp&0x01)==1) { // BIOS enable FIR @@ -262,7 +262,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi rc = -ENODEV; //IR not turn on !!!!! }//Not VT1211 - IRDA_DEBUG(2, "%s(): End - rc = %d\n", __FUNCTION__, rc); + IRDA_DEBUG(2, "%s(): End - rc = %d\n", __func__, rc); return rc; } @@ -276,7 +276,7 @@ static void via_ircc_clean(void) { int i; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); for (i=0; i < ARRAY_SIZE(dev_self); i++) { if (dev_self[i]) @@ -286,7 +286,7 @@ static void via_ircc_clean(void) static void __devexit via_remove_one (struct pci_dev *pdev) { - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); /* FIXME : This is ugly. We should use pci_get_drvdata(pdev); * to get our driver instance and call directly via_ircc_close(). @@ -301,7 +301,7 @@ static void __devexit via_remove_one (struct pci_dev *pdev) static void __exit via_ircc_cleanup(void) { - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); /* FIXME : This should be redundant, as pci_unregister_driver() * should call via_remove_one() on each device. @@ -324,7 +324,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id) struct via_ircc_cb *self; int err; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); if (i >= ARRAY_SIZE(dev_self)) return -ENOMEM; @@ -360,7 +360,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id) /* Reserve the ioports that we need */ if (!request_region(self->io.fir_base, self->io.fir_ext, driver_name)) { IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n", - __FUNCTION__, self->io.fir_base); + __func__, self->io.fir_base); err = -ENODEV; goto err_out1; } @@ -471,7 +471,7 @@ static int via_ircc_close(struct via_ircc_cb *self) { int iobase; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); IRDA_ASSERT(self != NULL, return -1;); @@ -483,7 +483,7 @@ static int via_ircc_close(struct via_ircc_cb *self) /* Release the PORT that this driver is using */ IRDA_DEBUG(2, "%s(), Releasing Region %03x\n", - __FUNCTION__, self->io.fir_base); + __func__, self->io.fir_base); release_region(self->io.fir_base, self->io.fir_ext); if (self->tx_buff.head) dma_free_coherent(NULL, self->tx_buff.truesize, @@ -509,7 +509,7 @@ static void via_hw_init(struct via_ircc_cb *self) { int iobase = self->io.fir_base; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); SetMaxRxPacketSize(iobase, 0x0fff); //set to max:4095 // FIFO Init @@ -582,7 +582,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed, speed = speed; IRDA_DEBUG(1, "%s(): change_dongle_speed to %d for 0x%x, %d\n", - __FUNCTION__, speed, iobase, dongle_id); + __func__, speed, iobase, dongle_id); switch (dongle_id) { @@ -671,7 +671,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed, case 0x11: /* Temic TFDS4500 */ - IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __FUNCTION__); + IRDA_DEBUG(2, "%s: Temic TFDS4500: One RX pin, TX normal, RX inverted.\n", __func__); UseOneRX(iobase, ON); //use ONE RX....RX1 InvertTX(iobase, OFF); @@ -689,7 +689,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed, SlowIRRXLowActive(iobase, OFF); } else{ - IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __FUNCTION__); + IRDA_DEBUG(0, "%s: Warning: TFDS4500 not running in SIR mode !\n", __func__); } break; @@ -707,7 +707,7 @@ static void via_ircc_change_dongle_speed(int iobase, int speed, default: IRDA_ERROR("%s: Error: dongle_id %d unsupported !\n", - __FUNCTION__, dongle_id); + __func__, dongle_id); } } @@ -726,7 +726,7 @@ static void via_ircc_change_speed(struct via_ircc_cb *self, __u32 speed) iobase = self->io.fir_base; /* Update accounting for new speed */ self->io.speed = speed; - IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __FUNCTION__, speed); + IRDA_DEBUG(1, "%s: change_speed to %d bps.\n", __func__, speed); WriteReg(iobase, I_ST_CT_0, 0x0); @@ -957,7 +957,7 @@ static int via_ircc_dma_xmit(struct via_ircc_cb *self, u16 iobase) self->tx_buff.head) + self->tx_buff_dma, self->tx_fifo.queue[self->tx_fifo.ptr].len, DMA_TX_MODE); IRDA_DEBUG(1, "%s: tx_fifo.ptr=%x,len=%x,tx_fifo.len=%x..\n", - __FUNCTION__, self->tx_fifo.ptr, + __func__, self->tx_fifo.ptr, self->tx_fifo.queue[self->tx_fifo.ptr].len, self->tx_fifo.len); @@ -981,7 +981,7 @@ static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self) int ret = TRUE; u8 Tx_status; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); iobase = self->io.fir_base; /* Disable DMA */ @@ -1014,7 +1014,7 @@ static int via_ircc_dma_xmit_complete(struct via_ircc_cb *self) } IRDA_DEBUG(1, "%s: tx_fifo.len=%x ,tx_fifo.ptr=%x,tx_fifo.free=%x...\n", - __FUNCTION__, + __func__, self->tx_fifo.len, self->tx_fifo.ptr, self->tx_fifo.free); /* F01_S // Any frames to be sent back-to-back? @@ -1050,7 +1050,7 @@ static int via_ircc_dma_receive(struct via_ircc_cb *self) iobase = self->io.fir_base; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); self->tx_fifo.len = self->tx_fifo.ptr = self->tx_fifo.free = 0; self->tx_fifo.tail = self->tx_buff.head; @@ -1134,13 +1134,13 @@ static int via_ircc_dma_receive_complete(struct via_ircc_cb *self, return TRUE; //interrupt only, data maybe move by RxT if (((len - 4) < 2) || ((len - 4) > 2048)) { IRDA_DEBUG(1, "%s(): Trouble:len=%x,CurCount=%x,LastCount=%x..\n", - __FUNCTION__, len, RxCurCount(iobase, self), + __func__, len, RxCurCount(iobase, self), self->RxLastCount); hwreset(self); return FALSE; } IRDA_DEBUG(2, "%s(): fifo.len=%x,len=%x,CurCount=%x..\n", - __FUNCTION__, + __func__, st_fifo->len, len - 4, RxCurCount(iobase, self)); st_fifo->entries[st_fifo->tail].status = status; @@ -1187,7 +1187,7 @@ F01_E */ skb_put(skb, len - 4); skb_copy_to_linear_data(skb, self->rx_buff.data, len - 4); - IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(): len=%x.rx_buff=%p\n", __func__, len - 4, self->rx_buff.data); // Move to next frame @@ -1217,7 +1217,7 @@ static int upload_rxdata(struct via_ircc_cb *self, int iobase) len = GetRecvByte(iobase, self); - IRDA_DEBUG(2, "%s(): len=%x\n", __FUNCTION__, len); + IRDA_DEBUG(2, "%s(): len=%x\n", __func__, len); if ((len - 4) < 2) { self->stats.rx_dropped++; @@ -1302,7 +1302,7 @@ static int RxTimerHandler(struct via_ircc_cb *self, int iobase) skb_put(skb, len - 4); skb_copy_to_linear_data(skb, self->rx_buff.data, len - 4); - IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __FUNCTION__, + IRDA_DEBUG(2, "%s(): len=%x.head=%x\n", __func__, len - 4, st_fifo->head); // Move to next frame @@ -1318,7 +1318,7 @@ static int RxTimerHandler(struct via_ircc_cb *self, int iobase) IRDA_DEBUG(2, "%s(): End of upload HostStatus=%x,RxStatus=%x\n", - __FUNCTION__, + __func__, GetHostStatus(iobase), GetRXStatus(iobase)); /* @@ -1358,7 +1358,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id) iHostIntType = GetHostStatus(iobase); IRDA_DEBUG(4, "%s(): iHostIntType %02x: %s %s %s %02x\n", - __FUNCTION__, iHostIntType, + __func__, iHostIntType, (iHostIntType & 0x40) ? "Timer" : "", (iHostIntType & 0x20) ? "Tx" : "", (iHostIntType & 0x10) ? "Rx" : "", @@ -1388,7 +1388,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id) iTxIntType = GetTXStatus(iobase); IRDA_DEBUG(4, "%s(): iTxIntType %02x: %s %s %s %s\n", - __FUNCTION__, iTxIntType, + __func__, iTxIntType, (iTxIntType & 0x08) ? "FIFO underr." : "", (iTxIntType & 0x04) ? "EOM" : "", (iTxIntType & 0x02) ? "FIFO ready" : "", @@ -1412,7 +1412,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id) iRxIntType = GetRXStatus(iobase); IRDA_DEBUG(4, "%s(): iRxIntType %02x: %s %s %s %s %s %s %s\n", - __FUNCTION__, iRxIntType, + __func__, iRxIntType, (iRxIntType & 0x80) ? "PHY err." : "", (iRxIntType & 0x40) ? "CRC err" : "", (iRxIntType & 0x20) ? "FIFO overr." : "", @@ -1421,7 +1421,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id) (iRxIntType & 0x02) ? "RxMaxLen" : "", (iRxIntType & 0x01) ? "SIR bad" : ""); if (!iRxIntType) - IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __FUNCTION__); + IRDA_DEBUG(3, "%s(): RxIRQ =0\n", __func__); if (iRxIntType & 0x10) { if (via_ircc_dma_receive_complete(self, iobase)) { @@ -1431,7 +1431,7 @@ static irqreturn_t via_ircc_interrupt(int dummy, void *dev_id) } // No ERR else { //ERR IRDA_DEBUG(4, "%s(): RxIRQ ERR:iRxIntType=%x,HostIntType=%x,CurCount=%x,RxLastCount=%x_____\n", - __FUNCTION__, iRxIntType, iHostIntType, + __func__, iRxIntType, iHostIntType, RxCurCount(iobase, self), self->RxLastCount); @@ -1456,7 +1456,7 @@ static void hwreset(struct via_ircc_cb *self) int iobase; iobase = self->io.fir_base; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); ResetChip(iobase, 5); EnableDMA(iobase, OFF); @@ -1501,7 +1501,7 @@ static int via_ircc_is_receiving(struct via_ircc_cb *self) if (CkRxRecv(iobase, self)) status = TRUE; - IRDA_DEBUG(2, "%s(): status=%x....\n", __FUNCTION__, status); + IRDA_DEBUG(2, "%s(): status=%x....\n", __func__, status); return status; } @@ -1519,7 +1519,7 @@ static int via_ircc_net_open(struct net_device *dev) int iobase; char hwname[32]; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); IRDA_ASSERT(dev != NULL, return -1;); self = (struct via_ircc_cb *) dev->priv; @@ -1586,7 +1586,7 @@ static int via_ircc_net_close(struct net_device *dev) struct via_ircc_cb *self; int iobase; - IRDA_DEBUG(3, "%s()\n", __FUNCTION__); + IRDA_DEBUG(3, "%s()\n", __func__); IRDA_ASSERT(dev != NULL, return -1;); self = (struct via_ircc_cb *) dev->priv; @@ -1630,7 +1630,7 @@ static int via_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, IRDA_ASSERT(dev != NULL, return -1;); self = dev->priv; IRDA_ASSERT(self != NULL, return -1;); - IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, + IRDA_DEBUG(1, "%s(), %s, (cmd=0x%X)\n", __func__, dev->name, cmd); /* Disable interrupts & save flags */ spin_lock_irqsave(&self->lock, flags); diff --git a/drivers/net/irda/vlsi_ir.c b/drivers/net/irda/vlsi_ir.c index d15e00b8591..18f4b3a96ae 100644 --- a/drivers/net/irda/vlsi_ir.c +++ b/drivers/net/irda/vlsi_ir.c @@ -140,15 +140,15 @@ static void vlsi_ring_debug(struct vlsi_ring *r) unsigned i; printk(KERN_DEBUG "%s - ring %p / size %u / mask 0x%04x / len %u / dir %d / hw %p\n", - __FUNCTION__, r, r->size, r->mask, r->len, r->dir, r->rd[0].hw); - printk(KERN_DEBUG "%s - head = %d / tail = %d\n", __FUNCTION__, + __func__, r, r->size, r->mask, r->len, r->dir, r->rd[0].hw); + printk(KERN_DEBUG "%s - head = %d / tail = %d\n", __func__, atomic_read(&r->head) & r->mask, atomic_read(&r->tail) & r->mask); for (i = 0; i < r->size; i++) { rd = &r->rd[i]; - printk(KERN_DEBUG "%s - ring descr %u: ", __FUNCTION__, i); + printk(KERN_DEBUG "%s - ring descr %u: ", __func__, i); printk("skb=%p data=%p hw=%p\n", rd->skb, rd->buf, rd->hw); printk(KERN_DEBUG "%s - hw: status=%02x count=%u addr=0x%08x\n", - __FUNCTION__, (unsigned) rd_get_status(rd), + __func__, (unsigned) rd_get_status(rd), (unsigned) rd_get_count(rd), (unsigned) rd_get_addr(rd)); } } @@ -435,7 +435,7 @@ static struct vlsi_ring *vlsi_alloc_ring(struct pci_dev *pdev, struct ring_descr || !(busaddr = pci_map_single(pdev, rd->buf, len, dir))) { if (rd->buf) { IRDA_ERROR("%s: failed to create PCI-MAP for %p", - __FUNCTION__, rd->buf); + __func__, rd->buf); kfree(rd->buf); rd->buf = NULL; } @@ -489,7 +489,7 @@ static int vlsi_create_hwif(vlsi_irda_dev_t *idev) ringarea = pci_alloc_consistent(idev->pdev, HW_RING_AREA_SIZE, &idev->busaddr); if (!ringarea) { IRDA_ERROR("%s: insufficient memory for descriptor rings\n", - __FUNCTION__); + __func__); goto out; } memset(ringarea, 0, HW_RING_AREA_SIZE); @@ -564,7 +564,7 @@ static int vlsi_process_rx(struct vlsi_ring *r, struct ring_descr *rd) crclen = (idev->mode==IFF_FIR) ? sizeof(u32) : sizeof(u16); len -= crclen; /* remove trailing CRC */ if (len <= 0) { - IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __FUNCTION__, len); + IRDA_DEBUG(0, "%s: strange frame (len=%d)\n", __func__, len); ret |= VLSI_RX_DROP; goto done; } @@ -579,14 +579,14 @@ static int vlsi_process_rx(struct vlsi_ring *r, struct ring_descr *rd) */ le16_to_cpus(rd->buf+len); if (irda_calc_crc16(INIT_FCS,rd->buf,len+crclen) != GOOD_FCS) { - IRDA_DEBUG(0, "%s: crc error\n", __FUNCTION__); + IRDA_DEBUG(0, "%s: crc error\n", __func__); ret |= VLSI_RX_CRC; goto done; } } if (!rd->skb) { - IRDA_WARNING("%s: rx packet lost\n", __FUNCTION__); + IRDA_WARNING("%s: rx packet lost\n", __func__); ret |= VLSI_RX_DROP; goto done; } @@ -617,7 +617,7 @@ static void vlsi_fill_rx(struct vlsi_ring *r) for (rd = ring_last(r); rd != NULL; rd = ring_put(r)) { if (rd_is_active(rd)) { IRDA_WARNING("%s: driver bug: rx descr race with hw\n", - __FUNCTION__); + __func__); vlsi_ring_debug(r); break; } @@ -676,7 +676,7 @@ static void vlsi_rx_interrupt(struct net_device *ndev) if (ring_first(r) == NULL) { /* we are in big trouble, if this should ever happen */ - IRDA_ERROR("%s: rx ring exhausted!\n", __FUNCTION__); + IRDA_ERROR("%s: rx ring exhausted!\n", __func__); vlsi_ring_debug(r); } else @@ -697,7 +697,7 @@ static void vlsi_unarm_rx(vlsi_irda_dev_t *idev) if (rd_is_active(rd)) { rd_set_status(rd, 0); if (rd_get_count(rd)) { - IRDA_DEBUG(0, "%s - dropping rx packet\n", __FUNCTION__); + IRDA_DEBUG(0, "%s - dropping rx packet\n", __func__); ret = -VLSI_RX_DROP; } rd_set_count(rd, 0); @@ -772,7 +772,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase) int fifocnt; baudrate = idev->new_baud; - IRDA_DEBUG(2, "%s: %d -> %d\n", __FUNCTION__, idev->baud, idev->new_baud); + IRDA_DEBUG(2, "%s: %d -> %d\n", __func__, idev->baud, idev->new_baud); if (baudrate == 4000000) { mode = IFF_FIR; config = IRCFG_FIR; @@ -789,7 +789,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase) switch(baudrate) { default: IRDA_WARNING("%s: undefined baudrate %d - fallback to 9600!\n", - __FUNCTION__, baudrate); + __func__, baudrate); baudrate = 9600; /* fallthru */ case 2400: @@ -806,7 +806,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase) fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK; if (fifocnt != 0) { - IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt); + IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __func__, fifocnt); } outw(0, iobase+VLSI_PIO_IRENABLE); @@ -830,14 +830,14 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase) config ^= IRENABLE_SIR_ON; if (config != (IRENABLE_PHYANDCLOCK|IRENABLE_ENRXST)) { - IRDA_WARNING("%s: failed to set %s mode!\n", __FUNCTION__, + IRDA_WARNING("%s: failed to set %s mode!\n", __func__, (mode==IFF_SIR)?"SIR":((mode==IFF_MIR)?"MIR":"FIR")); ret = -1; } else { if (inw(iobase+VLSI_PIO_PHYCTL) != nphyctl) { IRDA_WARNING("%s: failed to apply baudrate %d\n", - __FUNCTION__, baudrate); + __func__, baudrate); ret = -1; } else { @@ -849,7 +849,7 @@ static int vlsi_set_baud(vlsi_irda_dev_t *idev, unsigned iobase) } if (ret) - vlsi_reg_debug(iobase,__FUNCTION__); + vlsi_reg_debug(iobase,__func__); return ret; } @@ -982,7 +982,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev) if (len >= r->len-5) IRDA_WARNING("%s: possible buffer overflow with SIR wrapping!\n", - __FUNCTION__); + __func__); } else { /* hw deals with MIR/FIR mode wrapping */ @@ -1027,7 +1027,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev) fifocnt = inw(ndev->base_addr+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK; if (fifocnt != 0) { - IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __FUNCTION__, fifocnt); + IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", __func__, fifocnt); } config = inw(iobase+VLSI_PIO_IRCFG); @@ -1040,7 +1040,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev) if (ring_put(r) == NULL) { netif_stop_queue(ndev); - IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __FUNCTION__); + IRDA_DEBUG(3, "%s: tx ring full - queue stopped\n", __func__); } spin_unlock_irqrestore(&idev->lock, flags); @@ -1049,7 +1049,7 @@ static int vlsi_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev) drop_unlock: spin_unlock_irqrestore(&idev->lock, flags); drop: - IRDA_WARNING("%s: dropping packet - %s\n", __FUNCTION__, msg); + IRDA_WARNING("%s: dropping packet - %s\n", __func__, msg); dev_kfree_skb_any(skb); idev->stats.tx_errors++; idev->stats.tx_dropped++; @@ -1106,7 +1106,7 @@ static void vlsi_tx_interrupt(struct net_device *ndev) fifocnt = inw(iobase+VLSI_PIO_RCVBCNT) & RCVBCNT_MASK; if (fifocnt != 0) { IRDA_DEBUG(0, "%s: rx fifo not empty(%d)\n", - __FUNCTION__, fifocnt); + __func__, fifocnt); } outw(config | IRCFG_ENTX, iobase+VLSI_PIO_IRCFG); } @@ -1115,7 +1115,7 @@ static void vlsi_tx_interrupt(struct net_device *ndev) if (netif_queue_stopped(ndev) && !idev->new_baud) { netif_wake_queue(ndev); - IRDA_DEBUG(3, "%s: queue awoken\n", __FUNCTION__); + IRDA_DEBUG(3, "%s: queue awoken\n", __func__); } } @@ -1138,7 +1138,7 @@ static void vlsi_unarm_tx(vlsi_irda_dev_t *idev) dev_kfree_skb_any(rd->skb); rd->skb = NULL; } - IRDA_DEBUG(0, "%s - dropping tx packet\n", __FUNCTION__); + IRDA_DEBUG(0, "%s - dropping tx packet\n", __func__); ret = -VLSI_TX_DROP; } else @@ -1188,7 +1188,7 @@ static int vlsi_start_clock(struct pci_dev *pdev) if (count < 3) { if (clksrc == 1) { /* explicitly asked for PLL hence bail out */ IRDA_ERROR("%s: no PLL or failed to lock!\n", - __FUNCTION__); + __func__); clkctl = CLKCTL_CLKSTP; pci_write_config_byte(pdev, VLSI_PCI_CLKCTL, clkctl); return -1; @@ -1197,7 +1197,7 @@ static int vlsi_start_clock(struct pci_dev *pdev) clksrc = 3; /* fallback to 40MHz XCLK (OB800) */ IRDA_DEBUG(0, "%s: PLL not locked, fallback to clksrc=%d\n", - __FUNCTION__, clksrc); + __func__, clksrc); } else clksrc = 1; /* got successful PLL lock */ @@ -1269,7 +1269,7 @@ static int vlsi_init_chip(struct pci_dev *pdev) /* start the clock and clean the registers */ if (vlsi_start_clock(pdev)) { - IRDA_ERROR("%s: no valid clock source\n", __FUNCTION__); + IRDA_ERROR("%s: no valid clock source\n", __func__); return -1; } iobase = ndev->base_addr; @@ -1386,7 +1386,7 @@ static void vlsi_tx_timeout(struct net_device *ndev) vlsi_irda_dev_t *idev = ndev->priv; - vlsi_reg_debug(ndev->base_addr, __FUNCTION__); + vlsi_reg_debug(ndev->base_addr, __func__); vlsi_ring_debug(idev->tx_ring); if (netif_running(ndev)) @@ -1401,7 +1401,7 @@ static void vlsi_tx_timeout(struct net_device *ndev) if (vlsi_start_hw(idev)) IRDA_ERROR("%s: failed to restart hw - %s(%s) unusable!\n", - __FUNCTION__, pci_name(idev->pdev), ndev->name); + __func__, pci_name(idev->pdev), ndev->name); else netif_start_queue(ndev); } @@ -1446,7 +1446,7 @@ static int vlsi_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd) break; default: IRDA_WARNING("%s: notsupp - cmd=%04x\n", - __FUNCTION__, cmd); + __func__, cmd); ret = -EOPNOTSUPP; } @@ -1491,7 +1491,7 @@ static irqreturn_t vlsi_interrupt(int irq, void *dev_instance) if (boguscount <= 0) IRDA_MESSAGE("%s: too much work in interrupt!\n", - __FUNCTION__); + __func__); return IRQ_RETVAL(handled); } @@ -1504,7 +1504,7 @@ static int vlsi_open(struct net_device *ndev) char hwname[32]; if (pci_request_regions(idev->pdev, drivername)) { - IRDA_WARNING("%s: io resource busy\n", __FUNCTION__); + IRDA_WARNING("%s: io resource busy\n", __func__); goto errout; } ndev->base_addr = pci_resource_start(idev->pdev,0); @@ -1519,7 +1519,7 @@ static int vlsi_open(struct net_device *ndev) if (request_irq(ndev->irq, vlsi_interrupt, IRQF_SHARED, drivername, ndev)) { IRDA_WARNING("%s: couldn't get IRQ: %d\n", - __FUNCTION__, ndev->irq); + __func__, ndev->irq); goto errout_io; } @@ -1540,7 +1540,7 @@ static int vlsi_open(struct net_device *ndev) netif_start_queue(ndev); - IRDA_MESSAGE("%s: device %s operational\n", __FUNCTION__, ndev->name); + IRDA_MESSAGE("%s: device %s operational\n", __func__, ndev->name); return 0; @@ -1574,7 +1574,7 @@ static int vlsi_close(struct net_device *ndev) pci_release_regions(idev->pdev); - IRDA_MESSAGE("%s: device %s stopped\n", __FUNCTION__, ndev->name); + IRDA_MESSAGE("%s: device %s stopped\n", __func__, ndev->name); return 0; } @@ -1593,7 +1593,7 @@ static int vlsi_irda_init(struct net_device *ndev) if (pci_set_dma_mask(pdev,DMA_MASK_USED_BY_HW) || pci_set_dma_mask(pdev,DMA_MASK_MSTRPAGE)) { - IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __FUNCTION__); + IRDA_ERROR("%s: aborting due to PCI BM-DMA address limitations\n", __func__); return -1; } @@ -1645,14 +1645,14 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id) if ( !pci_resource_start(pdev,0) || !(pci_resource_flags(pdev,0) & IORESOURCE_IO) ) { - IRDA_ERROR("%s: bar 0 invalid", __FUNCTION__); + IRDA_ERROR("%s: bar 0 invalid", __func__); goto out_disable; } ndev = alloc_irdadev(sizeof(*idev)); if (ndev==NULL) { IRDA_ERROR("%s: Unable to allocate device memory.\n", - __FUNCTION__); + __func__); goto out_disable; } @@ -1667,7 +1667,7 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto out_freedev; if (register_netdev(ndev) < 0) { - IRDA_ERROR("%s: register_netdev failed\n", __FUNCTION__); + IRDA_ERROR("%s: register_netdev failed\n", __func__); goto out_freedev; } @@ -1678,7 +1678,7 @@ vlsi_irda_probe(struct pci_dev *pdev, const struct pci_device_id *id) vlsi_proc_root, VLSI_PROC_FOPS, ndev); if (!ent) { IRDA_WARNING("%s: failed to create proc entry\n", - __FUNCTION__); + __func__); } else { ent->size = 0; } @@ -1745,7 +1745,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state) if (!ndev) { IRDA_ERROR("%s - %s: no netdevice \n", - __FUNCTION__, pci_name(pdev)); + __func__, pci_name(pdev)); return 0; } idev = ndev->priv; @@ -1756,7 +1756,7 @@ static int vlsi_irda_suspend(struct pci_dev *pdev, pm_message_t state) pdev->current_state = state.event; } else - IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, pci_name(pdev), pdev->current_state, state.event); + IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __func__, pci_name(pdev), pdev->current_state, state.event); mutex_unlock(&idev->mtx); return 0; } @@ -1784,7 +1784,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev) if (!ndev) { IRDA_ERROR("%s - %s: no netdevice \n", - __FUNCTION__, pci_name(pdev)); + __func__, pci_name(pdev)); return 0; } idev = ndev->priv; @@ -1792,7 +1792,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev) if (pdev->current_state == 0) { mutex_unlock(&idev->mtx); IRDA_WARNING("%s - %s: already resumed\n", - __FUNCTION__, pci_name(pdev)); + __func__, pci_name(pdev)); return 0; } @@ -1811,7 +1811,7 @@ static int vlsi_irda_resume(struct pci_dev *pdev) * now we explicitly set pdev->current_state = 0 after enabling the * device and independently resume_ok should catch any garbage config. */ - IRDA_WARNING("%s - hm, nothing to resume?\n", __FUNCTION__); + IRDA_WARNING("%s - hm, nothing to resume?\n", __func__); mutex_unlock(&idev->mtx); return 0; } diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h index c8b9c74eea5..9b1884329fb 100644 --- a/drivers/net/irda/vlsi_ir.h +++ b/drivers/net/irda/vlsi_ir.h @@ -617,7 +617,7 @@ static inline void rd_set_addr_status(struct ring_descr *rd, dma_addr_t a, u8 s) */ if ((a & ~DMA_MASK_MSTRPAGE)>>24 != MSTRPAGE_VALUE) { - IRDA_ERROR("%s: pci busaddr inconsistency!\n", __FUNCTION__); + IRDA_ERROR("%s: pci busaddr inconsistency!\n", __func__); dump_stack(); return; } diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c index 9fd2451b0fb..002a6d769f2 100644 --- a/drivers/net/irda/w83977af_ir.c +++ b/drivers/net/irda/w83977af_ir.c @@ -114,7 +114,7 @@ static int __init w83977af_init(void) { int i; - IRDA_DEBUG(0, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s()\n", __func__ ); for (i=0; (io[i] < 2000) && (i < ARRAY_SIZE(dev_self)); i++) { if (w83977af_open(i, io[i], irq[i], dma[i]) == 0) @@ -133,7 +133,7 @@ static void __exit w83977af_cleanup(void) { int i; - IRDA_DEBUG(4, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(4, "%s()\n", __func__ ); for (i=0; i < ARRAY_SIZE(dev_self); i++) { if (dev_self[i]) @@ -154,12 +154,12 @@ int w83977af_open(int i, unsigned int iobase, unsigned int irq, struct w83977af_ir *self; int err; - IRDA_DEBUG(0, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s()\n", __func__ ); /* Lock the port that we need */ if (!request_region(iobase, CHIP_IO_EXTENT, driver_name)) { IRDA_DEBUG(0, "%s(), can't get iobase of 0x%03x\n", - __FUNCTION__ , iobase); + __func__ , iobase); return -ENODEV; } @@ -241,7 +241,7 @@ int w83977af_open(int i, unsigned int iobase, unsigned int irq, err = register_netdev(dev); if (err) { - IRDA_ERROR("%s(), register_netdevice() failed!\n", __FUNCTION__); + IRDA_ERROR("%s(), register_netdevice() failed!\n", __func__); goto err_out3; } IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name); @@ -273,7 +273,7 @@ static int w83977af_close(struct w83977af_ir *self) { int iobase; - IRDA_DEBUG(0, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s()\n", __func__ ); iobase = self->io.fir_base; @@ -294,7 +294,7 @@ static int w83977af_close(struct w83977af_ir *self) /* Release the PORT that this driver is using */ IRDA_DEBUG(0 , "%s(), Releasing Region %03x\n", - __FUNCTION__ , self->io.fir_base); + __func__ , self->io.fir_base); release_region(self->io.fir_base, self->io.fir_ext); if (self->tx_buff.head) @@ -316,7 +316,7 @@ int w83977af_probe( int iobase, int irq, int dma) int i; for (i=0; i < 2; i++) { - IRDA_DEBUG( 0, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG( 0, "%s()\n", __func__ ); #ifdef CONFIG_USE_W977_PNP /* Enter PnP configuration mode */ w977_efm_enter(efbase[i]); @@ -403,7 +403,7 @@ int w83977af_probe( int iobase, int irq, int dma) return 0; } else { /* Try next extented function register address */ - IRDA_DEBUG( 0, "%s(), Wrong chip version", __FUNCTION__ ); + IRDA_DEBUG( 0, "%s(), Wrong chip version", __func__ ); } } return -1; @@ -439,19 +439,19 @@ void w83977af_change_speed(struct w83977af_ir *self, __u32 speed) case 115200: outb(0x01, iobase+ABLL); break; case 576000: ir_mode = HCR_MIR_576; - IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __func__ ); break; case 1152000: ir_mode = HCR_MIR_1152; - IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __func__ ); break; case 4000000: ir_mode = HCR_FIR; - IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __func__ ); break; default: ir_mode = HCR_FIR; - IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __FUNCTION__ , speed); + IRDA_DEBUG(0, "%s(), unknown baud rate of %d\n", __func__ , speed); break; } @@ -501,7 +501,7 @@ int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev) iobase = self->io.fir_base; - IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __FUNCTION__ , jiffies, + IRDA_DEBUG(4, "%s(%ld), skb->len=%d\n", __func__ , jiffies, (int) skb->len); /* Lock transmit buffer */ @@ -549,7 +549,7 @@ int w83977af_hard_xmit(struct sk_buff *skb, struct net_device *dev) outb(ICR_ETMRI, iobase+ICR); } else { #endif - IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __FUNCTION__ , jiffies, mtt); + IRDA_DEBUG(4, "%s(%ld), mtt=%d\n", __func__ , jiffies, mtt); if (mtt) udelay(mtt); @@ -591,7 +591,7 @@ static void w83977af_dma_write(struct w83977af_ir *self, int iobase) unsigned long flags; __u8 hcr; #endif - IRDA_DEBUG(4, "%s(), len=%d\n", __FUNCTION__ , self->tx_buff.len); + IRDA_DEBUG(4, "%s(), len=%d\n", __func__ , self->tx_buff.len); /* Save current set */ set = inb(iobase+SSR); @@ -643,7 +643,7 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size) int actual = 0; __u8 set; - IRDA_DEBUG(4, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(4, "%s()\n", __func__ ); /* Save current bank */ set = inb(iobase+SSR); @@ -651,11 +651,11 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size) switch_bank(iobase, SET0); if (!(inb_p(iobase+USR) & USR_TSRE)) { IRDA_DEBUG(4, - "%s(), warning, FIFO not empty yet!\n", __FUNCTION__ ); + "%s(), warning, FIFO not empty yet!\n", __func__ ); fifo_size -= 17; IRDA_DEBUG(4, "%s(), %d bytes left in tx fifo\n", - __FUNCTION__ , fifo_size); + __func__ , fifo_size); } /* Fill FIFO with current frame */ @@ -665,7 +665,7 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size) } IRDA_DEBUG(4, "%s(), fifo_size %d ; %d sent of %d\n", - __FUNCTION__ , fifo_size, actual, len); + __func__ , fifo_size, actual, len); /* Restore bank */ outb(set, iobase+SSR); @@ -685,7 +685,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self) int iobase; __u8 set; - IRDA_DEBUG(4, "%s(%ld)\n", __FUNCTION__ , jiffies); + IRDA_DEBUG(4, "%s(%ld)\n", __func__ , jiffies); IRDA_ASSERT(self != NULL, return;); @@ -700,7 +700,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self) /* Check for underrrun! */ if (inb(iobase+AUDR) & AUDR_UNDR) { - IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s(), Transmit underrun!\n", __func__ ); self->stats.tx_errors++; self->stats.tx_fifo_errors++; @@ -741,7 +741,7 @@ int w83977af_dma_receive(struct w83977af_ir *self) #endif IRDA_ASSERT(self != NULL, return -1;); - IRDA_DEBUG(4, "%s\n", __FUNCTION__ ); + IRDA_DEBUG(4, "%s\n", __func__ ); iobase= self->io.fir_base; @@ -812,7 +812,7 @@ int w83977af_dma_receive_complete(struct w83977af_ir *self) __u8 set; __u8 status; - IRDA_DEBUG(4, "%s\n", __FUNCTION__ ); + IRDA_DEBUG(4, "%s\n", __func__ ); st_fifo = &self->st_fifo; @@ -892,7 +892,7 @@ int w83977af_dma_receive_complete(struct w83977af_ir *self) skb = dev_alloc_skb(len+1); if (skb == NULL) { printk(KERN_INFO - "%s(), memory squeeze, dropping frame.\n", __FUNCTION__); + "%s(), memory squeeze, dropping frame.\n", __func__); /* Restore set register */ outb(set, iobase+SSR); @@ -943,7 +943,7 @@ static void w83977af_pio_receive(struct w83977af_ir *self) __u8 byte = 0x00; int iobase; - IRDA_DEBUG(4, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(4, "%s()\n", __func__ ); IRDA_ASSERT(self != NULL, return;); @@ -970,7 +970,7 @@ static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr) __u8 set; int iobase; - IRDA_DEBUG(4, "%s(), isr=%#x\n", __FUNCTION__ , isr); + IRDA_DEBUG(4, "%s(), isr=%#x\n", __func__ , isr); iobase = self->io.fir_base; /* Transmit FIFO low on data */ @@ -1007,7 +1007,7 @@ static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr) /* Check if we need to change the speed? */ if (self->new_speed) { IRDA_DEBUG(2, - "%s(), Changing speed!\n", __FUNCTION__ ); + "%s(), Changing speed!\n", __func__ ); w83977af_change_speed(self, self->new_speed); self->new_speed = 0; } @@ -1189,7 +1189,7 @@ static int w83977af_net_open(struct net_device *dev) char hwname[32]; __u8 set; - IRDA_DEBUG(0, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s()\n", __func__ ); IRDA_ASSERT(dev != NULL, return -1;); self = (struct w83977af_ir *) dev->priv; @@ -1252,7 +1252,7 @@ static int w83977af_net_close(struct net_device *dev) int iobase; __u8 set; - IRDA_DEBUG(0, "%s()\n", __FUNCTION__ ); + IRDA_DEBUG(0, "%s()\n", __func__ ); IRDA_ASSERT(dev != NULL, return -1;); @@ -1307,7 +1307,7 @@ static int w83977af_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) IRDA_ASSERT(self != NULL, return -1;); - IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__ , dev->name, cmd); + IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd); spin_lock_irqsave(&self->lock, flags); -- GitLab From 5afe27380bc42454254c9c83c045240249c15e35 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 30 Jul 2008 21:57:59 -0700 Subject: [PATCH 0460/1024] sparc64: Make global reg dumping even more useful. Record one more level of stack frame program counter. Particularly when lockdep and all sorts of spinlock debugging is enabled, figuring out the caller of spin_lock() is difficult when the cpu is stuck on the lock. Signed-off-by: David S. Miller --- arch/sparc/include/asm/ptrace_64.h | 8 +++---- arch/sparc64/kernel/process.c | 36 ++++++++++++++++++++++++------ arch/sparc64/mm/ultra.S | 7 ++++++ 3 files changed, 40 insertions(+), 11 deletions(-) diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h index ec6d45c84cd..390d92ac67c 100644 --- a/arch/sparc/include/asm/ptrace_64.h +++ b/arch/sparc/include/asm/ptrace_64.h @@ -134,9 +134,9 @@ struct global_reg_snapshot { unsigned long tnpc; unsigned long o7; unsigned long i7; + unsigned long rpc; struct thread_info *thread; unsigned long pad1; - unsigned long pad2; }; #define __ARCH_WANT_COMPAT_SYS_PTRACE @@ -315,9 +315,9 @@ extern void __show_regs(struct pt_regs *); #define GR_SNAP_TNPC 0x10 #define GR_SNAP_O7 0x18 #define GR_SNAP_I7 0x20 -#define GR_SNAP_THREAD 0x28 -#define GR_SNAP_PAD1 0x30 -#define GR_SNAP_PAD2 0x38 +#define GR_SNAP_RPC 0x28 +#define GR_SNAP_THREAD 0x30 +#define GR_SNAP_PAD1 0x38 #endif /* __KERNEL__ */ diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index 0f60547c24d..fc8137a21ce 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -304,6 +304,19 @@ void show_regs(struct pt_regs *regs) struct global_reg_snapshot global_reg_snapshot[NR_CPUS]; static DEFINE_SPINLOCK(global_reg_snapshot_lock); +static bool kstack_valid(struct thread_info *tp, struct reg_window *rw) +{ + unsigned long thread_base, fp; + + thread_base = (unsigned long) tp; + fp = (unsigned long) rw; + + if (fp < (thread_base + sizeof(struct thread_info)) || + fp >= (thread_base + THREAD_SIZE)) + return false; + return true; +} + static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs, int this_cpu) { @@ -315,14 +328,22 @@ static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs, global_reg_snapshot[this_cpu].o7 = regs->u_regs[UREG_I7]; if (regs->tstate & TSTATE_PRIV) { + struct thread_info *tp = current_thread_info(); struct reg_window *rw; rw = (struct reg_window *) (regs->u_regs[UREG_FP] + STACK_BIAS); - global_reg_snapshot[this_cpu].i7 = rw->ins[7]; - } else + if (kstack_valid(tp, rw)) { + global_reg_snapshot[this_cpu].i7 = rw->ins[7]; + rw = (struct reg_window *) + (rw->ins[6] + STACK_BIAS); + if (kstack_valid(tp, rw)) + global_reg_snapshot[this_cpu].rpc = rw->ins[7]; + } + } else { global_reg_snapshot[this_cpu].i7 = 0; - + global_reg_snapshot[this_cpu].rpc = 0; + } global_reg_snapshot[this_cpu].thread = tp; } @@ -375,13 +396,14 @@ static void sysrq_handle_globreg(int key, struct tty_struct *tty) ((tp && tp->task) ? tp->task->pid : -1)); if (gp->tstate & TSTATE_PRIV) { - printk(" TPC[%pS] O7[%pS] I7[%pS]\n", + printk(" TPC[%pS] O7[%pS] I7[%pS] RPC[%pS]\n", (void *) gp->tpc, (void *) gp->o7, - (void *) gp->i7); + (void *) gp->i7, + (void *) gp->rpc); } else { - printk(" TPC[%lx] O7[%lx] I7[%lx]\n", - gp->tpc, gp->o7, gp->i7); + printk(" TPC[%lx] O7[%lx] I7[%lx] RPC[%lx]\n", + gp->tpc, gp->o7, gp->i7, gp->rpc); } } diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 4c8ca131ffa..77ba88597cc 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -531,6 +531,13 @@ xcall_fetch_glob_regs: stx %g7, [%g1 + GR_SNAP_TNPC] stx %o7, [%g1 + GR_SNAP_O7] stx %i7, [%g1 + GR_SNAP_I7] + /* Don't try this at home kids... */ + rdpr %cwp, %g2 + sub %g2, 1, %g7 + wrpr %g7, %cwp + mov %i7, %g7 + wrpr %g2, %cwp + stx %g7, [%g1 + GR_SNAP_RPC] sethi %hi(trap_block), %g7 or %g7, %lo(trap_block), %g7 sllx %g2, TRAP_BLOCK_SZ_SHIFT, %g2 -- GitLab From 09ee167cbf3b7390c993c6699ce9fa84e55422bf Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 30 Jul 2008 22:35:00 -0700 Subject: [PATCH 0461/1024] sparc64: Hook up trigger_all_cpu_backtrace(). We already have code that does this, but it is only currently attached to sysrq-'y'. Signed-off-by: David S. Miller --- arch/sparc/include/asm/irq_64.h | 3 +++ arch/sparc64/kernel/process.c | 10 ++++++++-- 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h index 0bb9bf53174..3473e25231d 100644 --- a/arch/sparc/include/asm/irq_64.h +++ b/arch/sparc/include/asm/irq_64.h @@ -90,4 +90,7 @@ static inline unsigned long get_softint(void) return retval; } +void __trigger_all_cpu_backtrace(void); +#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace() + #endif diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index fc8137a21ce..e1eff41809c 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -300,7 +300,6 @@ void show_regs(struct pt_regs *regs) #endif } -#ifdef CONFIG_MAGIC_SYSRQ struct global_reg_snapshot global_reg_snapshot[NR_CPUS]; static DEFINE_SPINLOCK(global_reg_snapshot_lock); @@ -362,7 +361,7 @@ static void __global_reg_poll(struct global_reg_snapshot *gp) } } -static void sysrq_handle_globreg(int key, struct tty_struct *tty) +void __trigger_all_cpu_backtrace(void) { struct thread_info *tp = current_thread_info(); struct pt_regs *regs = get_irq_regs(); @@ -412,6 +411,13 @@ static void sysrq_handle_globreg(int key, struct tty_struct *tty) spin_unlock_irqrestore(&global_reg_snapshot_lock, flags); } +#ifdef CONFIG_MAGIC_SYSRQ + +static void sysrq_handle_globreg(int key, struct tty_struct *tty) +{ + __trigger_all_cpu_backtrace(); +} + static struct sysrq_key_op sparc_globalreg_op = { .handler = sysrq_handle_globreg, .help_msg = "Globalregs", -- GitLab From e8389f0c44652ee63d95bc0a7f8d565ac25dac77 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 24 Jul 2008 16:38:06 +0100 Subject: [PATCH 0462/1024] pata_ali: misplaced pci_dev_put() The ali_init_one() function does a search for an isa_bridge, but then fails to release it if the revision information was not correctly found. the problem comes from: isa_bridge = pci_get_device(...); if (isa_bridge && ...) { pci_dev_put(isa_bridge); } where the pci_dev_put() is never called if isa_bridge was valid but the extra checks on the chip-revision fail to match. Signed-off-by: Ben Dooks Signed-off-by: Jeff Garzik --- drivers/ata/pata_ali.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 0f3e659db99..5ca70fa1f58 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -550,8 +550,9 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) pci_read_config_byte(isa_bridge, 0x5E, &tmp); if ((tmp & 0x1E) == 0x12) ppi[0] = &info_20_udma; - pci_dev_put(isa_bridge); } + pci_dev_put(isa_bridge); + return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL); } -- GitLab From bfce5e0179ad059035df28558724ff60af708e09 Mon Sep 17 00:00:00 2001 From: "JosephChan@via.com.tw" Date: Wed, 30 Jul 2008 12:32:48 -0700 Subject: [PATCH 0463/1024] pata_via: add VX800 flag; add function for fixing h/w bugs Add flag VIA_SATA_PATA for vx800, VX800 uses the same chipset(0x0581/0x5324) as CX700, which has 1 PATA channel(Master/Slave) and 1 SATA channel(Master/Slave) Add function . This is to fix the internal bug of VIA chipsets, which will reset the device register after changing the IEN bit in CTL register Signed-off-by: Joseph Chan Cc: Tejun Heo Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/pata_via.c | 64 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 63 insertions(+), 1 deletion(-) diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 708ed144ede..57d951b11f2 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -98,7 +98,8 @@ static const struct via_isa_bridge { u8 rev_max; u16 flags; } via_isa_bridges[] = { - { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, + { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 | + VIA_BAD_AST | VIA_SATA_PATA }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, @@ -322,6 +323,65 @@ static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev) via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]); } +/** + * via_ata_sff_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * Note: This is to fix the internal bug of via chipsets, which + * will reset the device register after changing the IEN bit on + * ctl register + */ +static void via_ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + if (tf->ctl != ap->last_ctl) { + iowrite8(tf->ctl, ioaddr->ctl_addr); + iowrite8(tf->device, ioaddr->device_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + } + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + iowrite8(tf->hob_feature, ioaddr->feature_addr); + iowrite8(tf->hob_nsect, ioaddr->nsect_addr); + iowrite8(tf->hob_lbal, ioaddr->lbal_addr); + iowrite8(tf->hob_lbam, ioaddr->lbam_addr); + iowrite8(tf->hob_lbah, ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } + + if (is_addr) { + iowrite8(tf->feature, ioaddr->feature_addr); + iowrite8(tf->nsect, ioaddr->nsect_addr); + iowrite8(tf->lbal, ioaddr->lbal_addr); + iowrite8(tf->lbam, ioaddr->lbam_addr); + iowrite8(tf->lbah, ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + iowrite8(tf->device, ioaddr->device_addr); + VPRINTK("device 0x%X\n", tf->device); + } + + ata_wait_idle(ap); +} + static struct scsi_host_template via_sht = { ATA_BMDMA_SHT(DRV_NAME), }; @@ -332,11 +392,13 @@ static struct ata_port_operations via_port_ops = { .set_piomode = via_set_piomode, .set_dmamode = via_set_dmamode, .prereset = via_pre_reset, + .sff_tf_load = via_ata_tf_load, }; static struct ata_port_operations via_port_ops_noirq = { .inherits = &via_port_ops, .sff_data_xfer = ata_sff_data_xfer_noirq, + .sff_tf_load = via_ata_tf_load, }; /** -- GitLab From 2486fa561a3192bbbec39c7feef87a1e07bd6342 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 31 Jul 2008 07:52:40 +0900 Subject: [PATCH 0464/1024] libata: update atapi disable handling Global and per-LLD ATAPI disable checks were done in the command issue path probably because it was left out during EH conversion. On affected machines, this can cause lots of warning messages. Move them to where they belong - the probing path. Reported by Chunbo Luo. Signed-off-by: Tejun Heo Cc: Chunbo Luo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 12 +++++++++++- drivers/ata/libata-scsi.c | 34 ++-------------------------------- drivers/ata/libata.h | 1 - 3 files changed, 13 insertions(+), 34 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9bef1a84fe3..9cd04f68410 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -120,7 +120,7 @@ static char ata_force_param_buf[PAGE_SIZE] __initdata; module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0); MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)"); -int atapi_enabled = 1; +static int atapi_enabled = 1; module_param(atapi_enabled, int, 0444); MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); @@ -2142,6 +2142,16 @@ int ata_dev_configure(struct ata_device *dev) return 0; } + if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) && + dev->class == ATA_DEV_ATAPI) { + ata_dev_printk(dev, KERN_WARNING, + "WARNING: ATAPI is %s, device ignored.\n", + atapi_enabled ? "not supported with this driver" + : "disabled"); + ata_dev_disable(dev); + return 0; + } + /* let ACPI work its magic */ rc = ata_acpi_on_devcfg(dev); if (rc) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index f3b4b15a8dc..b9d3ba423cb 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2550,36 +2550,6 @@ static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap, return ata_find_dev(ap, devno); } -/** - * ata_scsi_dev_enabled - determine if device is enabled - * @dev: ATA device - * - * Determine if commands should be sent to the specified device. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - * RETURNS: - * 0 if commands are not allowed / 1 if commands are allowed - */ - -static int ata_scsi_dev_enabled(struct ata_device *dev) -{ - if (unlikely(!ata_dev_enabled(dev))) - return 0; - - if (!atapi_enabled || (dev->link->ap->flags & ATA_FLAG_NO_ATAPI)) { - if (unlikely(dev->class == ATA_DEV_ATAPI)) { - ata_dev_printk(dev, KERN_WARNING, - "WARNING: ATAPI is %s, device ignored.\n", - atapi_enabled ? "not supported with this driver" : "disabled"); - return 0; - } - } - - return 1; -} - /** * ata_scsi_find_dev - lookup ata_device from scsi_cmnd * @ap: ATA port to which the device is attached @@ -2601,7 +2571,7 @@ ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) { struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev); - if (unlikely(!dev || !ata_scsi_dev_enabled(dev))) + if (unlikely(!dev || !ata_dev_enabled(dev))) return NULL; return dev; @@ -3622,7 +3592,7 @@ int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), ata_scsi_dump_cdb(ap, cmd); - if (likely(ata_scsi_dev_enabled(ap->link.device))) + if (likely(ata_dev_enabled(ap->link.device))) rc = __ata_scsi_queuecmd(cmd, done, ap->link.device); else { cmd->result = (DID_BAD_TARGET << 16); diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index f6f9c28ec7f..ade5c75b614 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -66,7 +66,6 @@ enum { extern unsigned int ata_print_id; extern struct workqueue_struct *ata_aux_wq; -extern int atapi_enabled; extern int atapi_passthru16; extern int libata_fua; extern int libata_noacpi; -- GitLab From 49ea3b04971ece6a5efe5d7b763ad9d2f169d441 Mon Sep 17 00:00:00 2001 From: Elias Oltmanns Date: Wed, 30 Jul 2008 12:32:39 -0700 Subject: [PATCH 0465/1024] libata-core: make sure that ata_force_tbl is freed in case of an error Fix a potential memory leak when ata_init() encounters an error. Signed-off-by: Elias Oltmanns Cc: Tejun Heo Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9cd04f68410..f69d1548b56 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6098,16 +6098,20 @@ static int __init ata_init(void) ata_wq = create_workqueue("ata"); if (!ata_wq) - return -ENOMEM; + goto free_force_tbl; ata_aux_wq = create_singlethread_workqueue("ata_aux"); - if (!ata_aux_wq) { - destroy_workqueue(ata_wq); - return -ENOMEM; - } + if (!ata_aux_wq) + goto free_wq; printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n"); return 0; + +free_wq: + destroy_workqueue(ata_wq); +free_force_tbl: + kfree(ata_force_tbl); + return -ENOMEM; } static void __exit ata_exit(void) -- GitLab From 487eff68e42287fd45cf178063f1ce1bad23c612 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 29 Jul 2008 15:06:26 +0900 Subject: [PATCH 0466/1024] ata_piix: subsys 106b:00a3 is apple ich8m too Subsys 106b:00a3 also is the weird apple ich8m which chokes when the latter two ports are accessed, add it. Reported by Felipe Sere. Signed-off-by: Tejun Heo Cc: Felipe Sere Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index a90ae03f56b..c294121fd69 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -250,6 +250,7 @@ static const struct pci_device_id piix_pci_tbl[] = { /* Mobile SATA Controller IDE (ICH8M), Apple */ { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata }, { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata }, + { 0x8086, 0x2828, 0x106b, 0x00a3, 0, 0, ich8m_apple_sata }, /* Mobile SATA Controller IDE (ICH8M) */ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (ICH9) */ -- GitLab From 1f938d060a7bc01b5f82d46db3e38cd501b445a6 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Mon, 21 Jul 2008 00:06:19 +0400 Subject: [PATCH 0467/1024] libata.h: replace __FUNCTION__ with __func__ Signed-off-by: Alexander Beregalov Signed-off-by: Jeff Garzik --- include/linux/libata.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/libata.h b/include/linux/libata.h index 5b247b8a6b3..d4b8e5fa3e8 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -60,9 +60,9 @@ /* note: prints function name for you */ #ifdef ATA_DEBUG -#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args) +#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) #ifdef ATA_VERBOSE_DEBUG -#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args) +#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) #else #define VPRINTK(fmt, args...) #endif /* ATA_VERBOSE_DEBUG */ @@ -71,7 +71,7 @@ #define VPRINTK(fmt, args...) #endif /* ATA_DEBUG */ -#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args) +#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __func__, ## args) /* NEW: debug levels */ #define HAVE_LIBATA_MSG 1 -- GitLab From 963e4975c6f93c148ca809d986d412201df9af89 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 24 Jul 2008 17:16:06 +0100 Subject: [PATCH 0468/1024] pata_it821x: Driver updates and reworking - Add support for the RDC 1010 variant - Rework the core library to have a read_id method. This allows the hacky bits of it821x to go and prepares us for pata_hd - Switch from WARN to BUG in ata_id_string as it will reboot if you get it wrong so WARN won't be seen - Allow the issue of command 0xFC on the 821x. This is needed to query rebuild status. - Tidy up printk formatting - Do more ident rewriting on RAID volumes to handle firmware provided ident data which is rather wonky - Report the firmware revision and device layout in RAID mode - Don't try and disable raid on the 8211 or RDC - they don't have the relevant bits Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 31 ++++- drivers/ata/pata_it821x.c | 270 +++++++++++++++++++++++++++++++++----- include/linux/libata.h | 3 + 3 files changed, 265 insertions(+), 39 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index f69d1548b56..5ba96c5052c 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1132,6 +1132,8 @@ void ata_id_string(const u16 *id, unsigned char *s, { unsigned int c; + BUG_ON(len & 1); + while (len > 0) { c = id[ofs] >> 8; *s = c; @@ -1165,8 +1167,6 @@ void ata_id_c_string(const u16 *id, unsigned char *s, { unsigned char *p; - WARN_ON(!(len & 1)); - ata_id_string(id, s, ofs, len - 1); p = s + strnlen(s, len - 1); @@ -1885,6 +1885,23 @@ static u32 ata_pio_mask_no_iordy(const struct ata_device *adev) return 3 << ATA_SHIFT_PIO; } +/** + * ata_do_dev_read_id - default ID read method + * @dev: device + * @tf: proposed taskfile + * @id: data buffer + * + * Issue the identify taskfile and hand back the buffer containing + * identify data. For some RAID controllers and for pre ATA devices + * this function is wrapped or replaced by the driver + */ +unsigned int ata_do_dev_read_id(struct ata_device *dev, + struct ata_taskfile *tf, u16 *id) +{ + return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE, + id, sizeof(id[0]) * ATA_ID_WORDS, 0); +} + /** * ata_dev_read_id - Read ID data from the specified device * @dev: target device @@ -1920,7 +1937,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, if (ata_msg_ctl(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__); - retry: +retry: ata_tf_init(dev, &tf); switch (class) { @@ -1948,8 +1965,11 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, */ tf.flags |= ATA_TFLAG_POLLING; - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, - id, sizeof(id[0]) * ATA_ID_WORDS, 0); + if (ap->ops->read_id) + err_mask = ap->ops->read_id(dev, &tf, id); + else + err_mask = ata_do_dev_read_id(dev, &tf, id); + if (err_mask) { if (err_mask & AC_ERR_NODEV_HINT) { ata_dev_printk(dev, KERN_DEBUG, @@ -6283,6 +6303,7 @@ EXPORT_SYMBOL_GPL(ata_host_resume); #endif /* CONFIG_PM */ EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); +EXPORT_SYMBOL_GPL(ata_do_dev_read_id); EXPORT_SYMBOL_GPL(ata_scsi_simulate); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index e10816931b2..27843c70eb9 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -80,7 +80,7 @@ #define DRV_NAME "pata_it821x" -#define DRV_VERSION "0.3.8" +#define DRV_VERSION "0.4.0" struct it821x_dev { @@ -425,6 +425,8 @@ static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc) case ATA_CMD_WRITE_MULTI: case ATA_CMD_WRITE_MULTI_EXT: case ATA_CMD_ID_ATA: + case ATA_CMD_INIT_DEV_PARAMS: + case 0xFC: /* Internal 'report rebuild state' */ /* Arguably should just no-op this one */ case ATA_CMD_SET_FEATURES: return ata_sff_qc_issue(qc); @@ -509,7 +511,7 @@ static void it821x_dev_config(struct ata_device *adev) if (strstr(model_num, "Integrated Technology Express")) { /* RAID mode */ - printk(KERN_INFO "IT821x %sRAID%d volume", + ata_dev_printk(adev, KERN_INFO, "%sRAID%d volume", adev->id[147]?"Bootable ":"", adev->id[129]); if (adev->id[129] != 1) @@ -519,37 +521,51 @@ static void it821x_dev_config(struct ata_device *adev) /* This is a controller firmware triggered funny, don't report the drive faulty! */ adev->horkage &= ~ATA_HORKAGE_DIAGNOSTIC; + /* No HPA in 'smart' mode */ + adev->horkage |= ATA_HORKAGE_BROKEN_HPA; } /** - * it821x_ident_hack - Hack identify data up - * @ap: Port + * it821x_read_id - Hack identify data up + * @adev: device to read + * @tf: proposed taskfile + * @id: buffer for returned ident data * - * Walk the devices on this firmware driven port and slightly + * Query the devices on this firmware driven port and slightly * mash the identify data to stop us and common tools trying to * use features not firmware supported. The firmware itself does * some masking (eg SMART) but not enough. - * - * This is a bit of an abuse of the cable method, but it is the - * only method called at the right time. We could modify the libata - * core specifically for ident hacking but while we have one offender - * it seems better to keep the fallout localised. */ -static int it821x_ident_hack(struct ata_port *ap) +static unsigned int it821x_read_id(struct ata_device *adev, + struct ata_taskfile *tf, u16 *id) { - struct ata_device *adev; - ata_link_for_each_dev(adev, &ap->link) { - if (ata_dev_enabled(adev)) { - adev->id[84] &= ~(1 << 6); /* No FUA */ - adev->id[85] &= ~(1 << 10); /* No HPA */ - adev->id[76] = 0; /* No NCQ/AN etc */ - } + unsigned int err_mask; + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + + err_mask = ata_do_dev_read_id(adev, tf, id); + if (err_mask) + return err_mask; + ata_id_c_string(id, model_num, ATA_ID_PROD, sizeof(model_num)); + + id[83] &= ~(1 << 12); /* Cache flush is firmware handled */ + id[83] &= ~(1 << 13); /* Ditto for LBA48 flushes */ + id[84] &= ~(1 << 6); /* No FUA */ + id[85] &= ~(1 << 10); /* No HPA */ + id[76] = 0; /* No NCQ/AN etc */ + + if (strstr(model_num, "Integrated Technology Express")) { + /* Set feature bits the firmware neglects */ + id[49] |= 0x0300; /* LBA, DMA */ + id[82] |= 0x0400; /* LBA48 */ + id[83] &= 0x7FFF; + id[83] |= 0x4000; /* Word 83 is valid */ + id[86] |= 0x0400; /* LBA48 on */ + id[ATA_ID_MAJOR_VER] |= 0x1F; } - return ata_cable_unknown(ap); + return err_mask; } - /** * it821x_check_atapi_dma - ATAPI DMA handler * @qc: Command we are about to issue @@ -577,6 +593,136 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc) return 0; } +/** + * it821x_display_disk - display disk setup + * @n: Device number + * @buf: Buffer block from firmware + * + * Produce a nice informative display of the device setup as provided + * by the firmware. + */ + +static void it821x_display_disk(int n, u8 *buf) +{ + unsigned char id[41]; + int mode = 0; + char *mtype; + char mbuf[8]; + char *cbl = "(40 wire cable)"; + + static const char *types[5] = { + "RAID0", "RAID1" "RAID 0+1", "JBOD", "DISK" + }; + + if (buf[52] > 4) /* No Disk */ + return; + + ata_id_c_string((u16 *)buf, id, 0, 41); + + if (buf[51]) { + mode = ffs(buf[51]); + mtype = "UDMA"; + } else if (buf[49]) { + mode = ffs(buf[49]); + mtype = "MWDMA"; + } + + if (buf[76]) + cbl = ""; + + if (mode) + snprintf(mbuf, 8, "%5s%d", mtype, mode - 1); + else + strcpy(mbuf, "PIO"); + if (buf[52] == 4) + printk(KERN_INFO "%d: %-6s %-8s %s %s\n", + n, mbuf, types[buf[52]], id, cbl); + else + printk(KERN_INFO "%d: %-6s %-8s Volume: %1d %s %s\n", + n, mbuf, types[buf[52]], buf[53], id, cbl); + if (buf[125] < 100) + printk(KERN_INFO "%d: Rebuilding: %d%%\n", n, buf[125]); +} + +/** + * it821x_firmware_command - issue firmware command + * @ap: IT821x port to interrogate + * @cmd: command + * @len: length + * + * Issue firmware commands expecting data back from the controller. We + * use this to issue commands that do not go via the normal paths. Other + * commands such as 0xFC can be issued normally. + */ + +static u8 *it821x_firmware_command(struct ata_port *ap, u8 cmd, int len) +{ + u8 status; + int n = 0; + u16 *buf = kmalloc(len, GFP_KERNEL); + if (buf == NULL) { + printk(KERN_ERR "it821x_firmware_command: Out of memory\n"); + return NULL; + } + /* This isn't quite a normal ATA command as we are talking to the + firmware not the drives */ + ap->ctl |= ATA_NIEN; + iowrite8(ap->ctl, ap->ioaddr.ctl_addr); + ata_wait_idle(ap); + iowrite8(ATA_DEVICE_OBS, ap->ioaddr.device_addr); + iowrite8(cmd, ap->ioaddr.command_addr); + udelay(1); + /* This should be almost immediate but a little paranoia goes a long + way. */ + while(n++ < 10) { + status = ioread8(ap->ioaddr.status_addr); + if (status & ATA_ERR) { + kfree(buf); + printk(KERN_ERR "it821x_firmware_command: rejected\n"); + return NULL; + } + if (status & ATA_DRQ) { + ioread16_rep(ap->ioaddr.data_addr, buf, len/2); + return (u8 *)buf; + } + mdelay(1); + } + kfree(buf); + printk(KERN_ERR "it821x_firmware_command: timeout\n"); + return NULL; +} + +/** + * it821x_probe_firmware - firmware reporting/setup + * @ap: IT821x port being probed + * + * Probe the firmware of the controller by issuing firmware command + * 0xFA and analysing the returned data. + */ + +static void it821x_probe_firmware(struct ata_port *ap) +{ + u8 *buf; + int i; + + /* This is a bit ugly as we can't just issue a task file to a device + as this is controller magic */ + + buf = it821x_firmware_command(ap, 0xFA, 512); + + if (buf != NULL) { + printk(KERN_INFO "pata_it821x: Firmware %02X/%02X/%02X%02X\n", + buf[505], + buf[506], + buf[507], + buf[508]); + for (i = 0; i < 4; i++) + it821x_display_disk(i, buf + 128 * i); + kfree(buf); + } +} + + /** * it821x_port_start - port setup @@ -610,6 +756,8 @@ static int it821x_port_start(struct ata_port *ap) /* Long I/O's although allowed in LBA48 space cause the onboard firmware to enter the twighlight zone */ /* No ATAPI DMA in this mode either */ + if (ap->port_no == 0) + it821x_probe_firmware(ap); } /* Pull the current clocks from 0x50 */ if (conf & (1 << (1 + ap->port_no))) @@ -631,6 +779,25 @@ static int it821x_port_start(struct ata_port *ap) return 0; } +/** + * it821x_rdc_cable - Cable detect for RDC1010 + * @ap: port we are checking + * + * Return the RDC1010 cable type. Unlike the IT821x we know how to do + * this and can do host side cable detect + */ + +static int it821x_rdc_cable(struct ata_port *ap) +{ + u16 r40; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + pci_read_config_word(pdev, 0x40, &r40); + if (r40 & (1 << (2 + ap->port_no))) + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; +} + static struct scsi_host_template it821x_sht = { ATA_BMDMA_SHT(DRV_NAME), }; @@ -641,9 +808,10 @@ static struct ata_port_operations it821x_smart_port_ops = { .check_atapi_dma= it821x_check_atapi_dma, .qc_issue = it821x_smart_qc_issue, - .cable_detect = it821x_ident_hack, + .cable_detect = ata_cable_80wire, .set_mode = it821x_smart_set_mode, .dev_config = it821x_dev_config, + .read_id = it821x_read_id, .port_start = it821x_port_start, }; @@ -664,8 +832,29 @@ static struct ata_port_operations it821x_passthru_port_ops = { .port_start = it821x_port_start, }; +static struct ata_port_operations it821x_rdc_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .check_atapi_dma= it821x_check_atapi_dma, + .sff_dev_select = it821x_passthru_dev_select, + .bmdma_start = it821x_passthru_bmdma_start, + .bmdma_stop = it821x_passthru_bmdma_stop, + .qc_issue = it821x_passthru_qc_issue, + + .cable_detect = it821x_rdc_cable, + .set_piomode = it821x_passthru_set_piomode, + .set_dmamode = it821x_passthru_set_dmamode, + + .port_start = it821x_port_start, +}; + static void it821x_disable_raid(struct pci_dev *pdev) { + /* Neither the RDC nor the IT8211 */ + if (pdev->vendor != PCI_VENDOR_ID_ITE || + pdev->device != PCI_DEVICE_ID_ITE_8212) + return; + /* Reset local CPU, and set BIOS not ready */ pci_write_config_byte(pdev, 0x5E, 0x01); @@ -690,6 +879,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA6, .port_ops = &it821x_smart_port_ops }; static const struct ata_port_info info_passthru = { @@ -699,6 +889,13 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) .udma_mask = ATA_UDMA6, .port_ops = &it821x_passthru_port_ops }; + static const struct ata_port_info info_rdc = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + /* No UDMA */ + .port_ops = &it821x_rdc_port_ops + }; const struct ata_port_info *ppi[] = { NULL, NULL }; static char *mode[2] = { "pass through", "smart" }; @@ -707,21 +904,25 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) rc = pcim_enable_device(pdev); if (rc) return rc; + + if (pdev->vendor == PCI_VENDOR_ID_RDC) { + ppi[0] = &info_rdc; + } else { + /* Force the card into bypass mode if so requested */ + if (it8212_noraid) { + printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n"); + it821x_disable_raid(pdev); + } + pci_read_config_byte(pdev, 0x50, &conf); + conf &= 1; - /* Force the card into bypass mode if so requested */ - if (it8212_noraid) { - printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n"); - it821x_disable_raid(pdev); + printk(KERN_INFO DRV_NAME": controller in %s mode.\n", + mode[conf]); + if (conf == 0) + ppi[0] = &info_passthru; + else + ppi[0] = &info_smart; } - pci_read_config_byte(pdev, 0x50, &conf); - conf &= 1; - - printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]); - if (conf == 0) - ppi[0] = &info_passthru; - else - ppi[0] = &info_smart; - return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL); } @@ -745,6 +946,7 @@ static int it821x_reinit_one(struct pci_dev *pdev) static const struct pci_device_id it821x[] = { { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), }, { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), }, + { PCI_VDEVICE(RDC, 0x1010), }, { }, }; diff --git a/include/linux/libata.h b/include/linux/libata.h index d4b8e5fa3e8..06b80337303 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -750,6 +750,7 @@ struct ata_port_operations { void (*set_piomode)(struct ata_port *ap, struct ata_device *dev); void (*set_dmamode)(struct ata_port *ap, struct ata_device *dev); int (*set_mode)(struct ata_link *link, struct ata_device **r_failed_dev); + unsigned int (*read_id)(struct ata_device *dev, struct ata_taskfile *tf, u16 *id); void (*dev_config)(struct ata_device *dev); @@ -951,6 +952,8 @@ extern void ata_id_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); extern void ata_id_c_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len); +extern unsigned int ata_do_dev_read_id(struct ata_device *dev, + struct ata_taskfile *tf, u16 *id); extern void ata_qc_complete(struct ata_queued_cmd *qc); extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active); extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, -- GitLab From 4a22442faeb33bdf34016a7b1f6b3d6ecd4e33e5 Mon Sep 17 00:00:00 2001 From: Jerry Hicks Date: Wed, 30 Jul 2008 12:49:59 -0700 Subject: [PATCH 0469/1024] [MTD] [NOR] drivers/mtd/chips/jedec_probe.c: fix Am29DL800BB device ID The device id for Am29DL800BB in jedec_probe.c is wrong. Reference: http://www.spansion.com/datasheets/21519c4.pdf I discovered this while working with u-boot. The u-boot folks mentioned Linux as an upstream reference, thought I'd post a heads-up here too. Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/chips/jedec_probe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index dbba5abf0db..f84ab618214 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -41,7 +41,7 @@ /* AMD */ -#define AM29DL800BB 0x22C8 +#define AM29DL800BB 0x22CB #define AM29DL800BT 0x224A #define AM29F800BB 0x2258 -- GitLab From ae375044d31075a31de5a839e07ded7f67b660aa Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 31 Jul 2008 00:38:01 -0700 Subject: [PATCH 0470/1024] netfilter: nf_conntrack_tcp: decrease timeouts while data in unacknowledged In order to time out dead connections quicker, keep track of outstanding data and cap the timeout. Suggested by Herbert Xu. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter/nf_conntrack_tcp.h | 3 +++ net/netfilter/nf_conntrack_proto_tcp.c | 29 ++++++++++++++++++---- 2 files changed, 27 insertions(+), 5 deletions(-) diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h index 22ce29995f1..a049df4f223 100644 --- a/include/linux/netfilter/nf_conntrack_tcp.h +++ b/include/linux/netfilter/nf_conntrack_tcp.h @@ -30,6 +30,9 @@ enum tcp_conntrack { /* Be liberal in window checking */ #define IP_CT_TCP_FLAG_BE_LIBERAL 0x08 +/* Has unacknowledged data */ +#define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED 0x10 + struct nf_ct_tcp_flags { u_int8_t flags; u_int8_t mask; diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index 420a10d8eb1..6f61261888e 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -67,7 +67,8 @@ static const char *const tcp_conntrack_names[] = { /* RFC1122 says the R2 limit should be at least 100 seconds. Linux uses 15 packets as limit, which corresponds to ~13-30min depending on RTO. */ -static unsigned int nf_ct_tcp_timeout_max_retrans __read_mostly = 5 MINS; +static unsigned int nf_ct_tcp_timeout_max_retrans __read_mostly = 5 MINS; +static unsigned int nf_ct_tcp_timeout_unacknowledged __read_mostly = 5 MINS; static unsigned int tcp_timeouts[TCP_CONNTRACK_MAX] __read_mostly = { [TCP_CONNTRACK_SYN_SENT] = 2 MINS, @@ -625,8 +626,10 @@ static bool tcp_in_window(const struct nf_conn *ct, swin = win + (sack - ack); if (sender->td_maxwin < swin) sender->td_maxwin = swin; - if (after(end, sender->td_end)) + if (after(end, sender->td_end)) { sender->td_end = end; + sender->flags |= IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED; + } /* * Update receiver data. */ @@ -637,6 +640,8 @@ static bool tcp_in_window(const struct nf_conn *ct, if (win == 0) receiver->td_maxend++; } + if (ack == receiver->td_end) + receiver->flags &= ~IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED; /* * Check retransmissions. @@ -951,9 +956,16 @@ static int tcp_packet(struct nf_conn *ct, if (old_state != new_state && new_state == TCP_CONNTRACK_FIN_WAIT) ct->proto.tcp.seen[dir].flags |= IP_CT_TCP_FLAG_CLOSE_INIT; - timeout = ct->proto.tcp.retrans >= nf_ct_tcp_max_retrans - && tcp_timeouts[new_state] > nf_ct_tcp_timeout_max_retrans - ? nf_ct_tcp_timeout_max_retrans : tcp_timeouts[new_state]; + + if (ct->proto.tcp.retrans >= nf_ct_tcp_max_retrans && + tcp_timeouts[new_state] > nf_ct_tcp_timeout_max_retrans) + timeout = nf_ct_tcp_timeout_max_retrans; + else if ((ct->proto.tcp.seen[0].flags | ct->proto.tcp.seen[1].flags) & + IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED && + tcp_timeouts[new_state] > nf_ct_tcp_timeout_unacknowledged) + timeout = nf_ct_tcp_timeout_unacknowledged; + else + timeout = tcp_timeouts[new_state]; write_unlock_bh(&tcp_lock); nf_conntrack_event_cache(IPCT_PROTOINFO_VOLATILE, skb); @@ -1235,6 +1247,13 @@ static struct ctl_table tcp_sysctl_table[] = { .mode = 0644, .proc_handler = &proc_dointvec_jiffies, }, + { + .procname = "nf_conntrack_tcp_timeout_unacknowledged", + .data = &nf_ct_tcp_timeout_unacknowledged, + .maxlen = sizeof(unsigned int), + .mode = 0644, + .proc_handler = &proc_dointvec_jiffies, + }, { .ctl_name = NET_NF_CONNTRACK_TCP_LOOSE, .procname = "nf_conntrack_tcp_loose", -- GitLab From a8ddc9163c6a16cd62531dba1ec5020484e33b02 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Thu, 31 Jul 2008 00:38:31 -0700 Subject: [PATCH 0471/1024] netfilter: ipt_recent: fix race between recent_mt_destroy and proc manipulations The thing is that recent_mt_destroy first flushes the entries from table with the recent_table_flush and only *after* this removes the proc file, corresponding to that table. Thus, if we manage to write to this file the '+XXX' command we will leak some entries. If we manage to write there a 'clean' command we'll race in two recent_table_flush flows, since the recent_mt_destroy calls this outside the recent_lock. The proper solution as I see it is to remove the proc file first and then go on with flushing the table. This flushing becomes safe w/o the lock, since the table is already inaccessible from the outside. Signed-off-by: Pavel Emelyanov Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/ipv4/netfilter/ipt_recent.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/netfilter/ipt_recent.c b/net/ipv4/netfilter/ipt_recent.c index 21cb053f5d7..3974d7cae5c 100644 --- a/net/ipv4/netfilter/ipt_recent.c +++ b/net/ipv4/netfilter/ipt_recent.c @@ -305,10 +305,10 @@ static void recent_mt_destroy(const struct xt_match *match, void *matchinfo) spin_lock_bh(&recent_lock); list_del(&t->list); spin_unlock_bh(&recent_lock); - recent_table_flush(t); #ifdef CONFIG_PROC_FS remove_proc_entry(t->name, proc_dir); #endif + recent_table_flush(t); kfree(t); } mutex_unlock(&recent_mutex); -- GitLab From 967ab999a090b1a4e7d3c7febfd6d89b42fb4cf4 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Thu, 31 Jul 2008 00:38:52 -0700 Subject: [PATCH 0472/1024] netfilter: xt_hashlimit: fix race between htable_destroy and htable_gc Deleting a timer with del_timer doesn't guarantee, that the timer function is not running at the moment of deletion. Thus in the xt_hashlimit case we can get into a ticklish situation when the htable_gc rearms the timer back and we'll actually delete an entry with a pending timer. Fix it with using del_timer_sync(). AFAIK del_timer_sync checks for the timer to be pending by itself, so I remove the check. Signed-off-by: Pavel Emelyanov Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/xt_hashlimit.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c index 6809af542a2..d9418a26781 100644 --- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -367,9 +367,7 @@ static void htable_gc(unsigned long htlong) static void htable_destroy(struct xt_hashlimit_htable *hinfo) { - /* remove timer, if it is pending */ - if (timer_pending(&hinfo->timer)) - del_timer(&hinfo->timer); + del_timer_sync(&hinfo->timer); /* remove proc entry */ remove_proc_entry(hinfo->pde->name, -- GitLab From 6f5fd8e9b98423add5f67b964e7cc8733dd73460 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Thu, 31 Jul 2008 03:46:30 -0400 Subject: [PATCH 0473/1024] drivers/media, include/media: delete zero-length files Signed-off-by: Jeff Garzik --- drivers/media/video/planb.c | 0 drivers/media/video/planb.h | 0 drivers/media/video/saa7196.h | 0 drivers/media/video/videodev.c | 0 include/media/audiochip.h | 0 5 files changed, 0 insertions(+), 0 deletions(-) delete mode 100644 drivers/media/video/planb.c delete mode 100644 drivers/media/video/planb.h delete mode 100644 drivers/media/video/saa7196.h delete mode 100644 drivers/media/video/videodev.c delete mode 100644 include/media/audiochip.h diff --git a/drivers/media/video/planb.c b/drivers/media/video/planb.c deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/drivers/media/video/planb.h b/drivers/media/video/planb.h deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/drivers/media/video/saa7196.h b/drivers/media/video/saa7196.h deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c deleted file mode 100644 index e69de29bb2d..00000000000 diff --git a/include/media/audiochip.h b/include/media/audiochip.h deleted file mode 100644 index e69de29bb2d..00000000000 -- GitLab From a014821340f068bea2fd39cb2578a043fc0dfc57 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 31 Jul 2008 00:58:35 -0700 Subject: [PATCH 0474/1024] sparc64: Kill VERBOSE_SHOWREGS code. It just clutters everything up and even though I wrote that hack I can't remember having used it in the last 5 years or so. Signed-off-by: David S. Miller --- arch/sparc64/kernel/process.c | 35 ----------------------------------- 1 file changed, 35 deletions(-) diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index e1eff41809c..affa4395245 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -52,8 +52,6 @@ #include #include -/* #define VERBOSE_SHOWREGS */ - static void sparc64_yield(int cpu) { if (tlb_type != hypervisor) @@ -253,30 +251,8 @@ void __show_regs(struct pt_regs * regs) #endif } -#ifdef VERBOSE_SHOWREGS -static void idump_from_user (unsigned int *pc) -{ - int i; - int code; - - if((((unsigned long) pc) & 3)) - return; - - pc -= 3; - for(i = -3; i < 6; i++) { - get_user(code, pc); - printk("%c%08x%c",i?' ':'<',code,i?' ':'>'); - pc++; - } - printk("\n"); -} -#endif - void show_regs(struct pt_regs *regs) { -#ifdef VERBOSE_SHOWREGS - extern long etrap, etraptl1; -#endif __show_regs(regs); #if 0 #ifdef CONFIG_SMP @@ -287,17 +263,6 @@ void show_regs(struct pt_regs *regs) } #endif #endif - -#ifdef VERBOSE_SHOWREGS - if (regs->tpc >= &etrap && regs->tpc < &etraptl1 && - regs->u_regs[14] >= (long)current - PAGE_SIZE && - regs->u_regs[14] < (long)current + 6 * PAGE_SIZE) { - printk ("*********parent**********\n"); - __show_regs((struct pt_regs *)(regs->u_regs[14] + PTREGS_OFF)); - idump_from_user(((struct pt_regs *)(regs->u_regs[14] + PTREGS_OFF))->tpc); - printk ("*********endpar**********\n"); - } -#endif } struct global_reg_snapshot global_reg_snapshot[NR_CPUS]; -- GitLab From 9c636e30a33aa37873c53977c429f0fdad4ec0eb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 31 Jul 2008 01:06:02 -0700 Subject: [PATCH 0475/1024] sparc64: Kill smp_report_regs(). All the call sites are #if 0'd out and we have a much more useful global cpu dumping facility these days. smp_report_regs() is way too verbose to be usable. Signed-off-by: David S. Miller --- arch/sparc64/kernel/process.c | 9 --------- arch/sparc64/kernel/smp.c | 6 ------ arch/sparc64/kernel/traps.c | 6 ------ arch/sparc64/mm/ultra.S | 35 ----------------------------------- 4 files changed, 56 deletions(-) diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index affa4395245..bf740e039b7 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -254,15 +254,6 @@ void __show_regs(struct pt_regs * regs) void show_regs(struct pt_regs *regs) { __show_regs(regs); -#if 0 -#ifdef CONFIG_SMP - { - extern void smp_report_regs(void); - - smp_report_regs(); - } -#endif -#endif } struct global_reg_snapshot global_reg_snapshot[NR_CPUS]; diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 7cf72b4bb10..340842e51ce 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -843,7 +843,6 @@ void smp_tsb_sync(struct mm_struct *mm) extern unsigned long xcall_flush_tlb_mm; extern unsigned long xcall_flush_tlb_pending; extern unsigned long xcall_flush_tlb_kernel_range; -extern unsigned long xcall_report_regs; #ifdef CONFIG_MAGIC_SYSRQ extern unsigned long xcall_fetch_glob_regs; #endif @@ -1022,11 +1021,6 @@ void kgdb_roundup_cpus(unsigned long flags) } #endif -void smp_report_regs(void) -{ - smp_cross_call(&xcall_report_regs, 0, 0, 0); -} - #ifdef CONFIG_MAGIC_SYSRQ void smp_fetch_global_regs(void) { diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index bd30ecba563..f56b6fe78e9 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -2177,7 +2177,6 @@ static inline struct reg_window *kernel_stack_up(struct reg_window *rw) void die_if_kernel(char *str, struct pt_regs *regs) { static int die_counter; - extern void smp_report_regs(void); int count = 0; /* Amuse the user. */ @@ -2215,11 +2214,6 @@ void die_if_kernel(char *str, struct pt_regs *regs) } user_instruction_dump ((unsigned int __user *) regs->tpc); } -#if 0 -#ifdef CONFIG_SMP - smp_report_regs(); -#endif -#endif if (regs->tstate & TSTATE_PRIV) do_exit(SIGKILL); do_exit(SIGSEGV); diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 77ba88597cc..ff1dc44d363 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -480,41 +480,6 @@ xcall_sync_tick: b rtrap_xcall ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1 - /* NOTE: This is SPECIAL!! We do etrap/rtrap however - * we choose to deal with the "BH's run with - * %pil==15" problem (described in asm/pil.h) - * by just invoking rtrap directly past where - * BH's are checked for. - * - * We do it like this because we do not want %pil==15 - * lockups to prevent regs being reported. - */ - .globl xcall_report_regs -xcall_report_regs: - -661: rdpr %pstate, %g2 - wrpr %g2, PSTATE_IG | PSTATE_AG, %pstate - .section .sun4v_2insn_patch, "ax" - .word 661b - nop - nop - .previous - - rdpr %pil, %g2 - wrpr %g0, 15, %pil - sethi %hi(109f), %g7 - b,pt %xcc, etrap_irq -109: or %g7, %lo(109b), %g7 -#ifdef CONFIG_TRACE_IRQFLAGS - call trace_hardirqs_off - nop -#endif - call __show_regs - add %sp, PTREGS_OFF, %o0 - /* Has to be a non-v9 branch due to the large distance. */ - b rtrap_xcall - ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1 - #ifdef CONFIG_MAGIC_SYSRQ .globl xcall_fetch_glob_regs xcall_fetch_glob_regs: -- GitLab From 1f4170e12db06fdde5279d665a7e6e2976b2b623 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Tue, 29 Jul 2008 23:48:42 +0200 Subject: [PATCH 0476/1024] KVM: s390: Fix kvm on IBM System z10 The z10 system supports large pages, kvm-s390 doesnt. Make sure that we dont advertise large pages to avoid the guest crashing as soon as the guest kernel activates DAT. Signed-off-by: Christian Borntraeger Signed-off-by: Avi Kivity --- arch/s390/kvm/priv.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c index 2e2d2ffb6a0..d1faf5c5440 100644 --- a/arch/s390/kvm/priv.c +++ b/arch/s390/kvm/priv.c @@ -158,6 +158,7 @@ static int handle_stfl(struct kvm_vcpu *vcpu) vcpu->stat.instruction_stfl++; facility_list &= ~(1UL<<24); /* no stfle */ + facility_list &= ~(1UL<<23); /* no large pages */ rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list), &facility_list, sizeof(facility_list)); -- GitLab From 94aa3d716ee0244cc5b9f2ab3745aed5fdfa30e0 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Thu, 31 Jul 2008 00:03:49 +0200 Subject: [PATCH 0477/1024] kbuild: genksyms parser: fix the __attribute__ rule We are having two kinds of problems with genksyms today: fake checksum changes without actual ABI changes, and changes which we would rather like to ignore (such as an additional field at the end of a structure that modules are not supposed to touch, for example). I have thought about ways to improve genksyms and compute checksums differently to avoid those problems, but in the end I don't see a fundamentally better way. So here are some genksyms patches for at least making the checksums more easily manageable, if we cannot fully fix them. In addition to the bugfixes (the first two patches), this allows genksyms to track checksum changes and report why a checksum changed (third patch), and to selectively ignore changes (fourth patch). This patch: Gcc __attribute__ definitions may occur repeatedly, e.g., static int foo __attribute__((__used__)) __attribute__((aligned (16))); The genksyms parser does not understand this, and generates a syntax error. Fix this case. Signed-off-by: Andreas Gruenbacher Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg --- scripts/genksyms/parse.c_shipped | 144 +++++++++++++++---------------- scripts/genksyms/parse.y | 2 +- 2 files changed, 73 insertions(+), 73 deletions(-) diff --git a/scripts/genksyms/parse.c_shipped b/scripts/genksyms/parse.c_shipped index 3e6079f36b9..eaee44e66a4 100644 --- a/scripts/genksyms/parse.c_shipped +++ b/scripts/genksyms/parse.c_shipped @@ -504,7 +504,7 @@ static const yytype_uint16 yyprhs[] = 239, 242, 245, 247, 248, 250, 252, 257, 262, 265, 269, 273, 277, 278, 280, 283, 287, 291, 292, 294, 296, 299, 303, 306, 307, 309, 311, 315, 318, 321, - 323, 326, 327, 329, 332, 333, 335 + 323, 326, 327, 330, 333, 334, 336 }; /* YYRHS -- A `-1'-separated list of the rules' RHS. */ @@ -542,9 +542,9 @@ static const yytype_int8 yyrhs[] = -1, -1, 89, -1, 90, -1, 89, 90, -1, 64, 91, 44, -1, 1, 44, -1, -1, 92, -1, 93, -1, 92, 46, 93, -1, 76, 95, -1, 37, 94, - -1, 94, -1, 52, 34, -1, -1, 31, -1, 30, - 44, -1, -1, 30, -1, 29, 47, 37, 49, 44, - -1 + -1, 94, -1, 52, 34, -1, -1, 95, 31, -1, + 30, 44, -1, -1, 30, -1, 29, 47, 37, 49, + 44, -1 }; /* YYRLINE[YYN] -- source line where rule number YYN was defined. */ @@ -647,7 +647,7 @@ static const yytype_uint8 yyr2[] = 2, 2, 1, 0, 1, 1, 4, 4, 2, 3, 3, 3, 0, 1, 2, 3, 3, 0, 1, 1, 2, 3, 2, 0, 1, 1, 3, 2, 2, 1, - 2, 0, 1, 2, 0, 1, 5 + 2, 0, 2, 2, 0, 1, 5 }; /* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state @@ -667,9 +667,9 @@ static const yytype_uint8 yydefact[] = 0, 66, 125, 101, 121, 71, 0, 7, 112, 106, 76, 77, 0, 0, 0, 121, 75, 0, 114, 115, 119, 105, 0, 110, 124, 0, 36, 0, 73, 72, - 61, 20, 122, 102, 0, 93, 0, 84, 87, 88, - 118, 0, 76, 0, 120, 74, 117, 80, 0, 111, - 0, 35, 126, 0, 21, 103, 70, 94, 56, 0, + 61, 20, 102, 0, 93, 0, 84, 87, 88, 118, + 0, 76, 0, 120, 74, 117, 80, 0, 111, 0, + 35, 126, 122, 0, 21, 103, 70, 94, 56, 0, 93, 90, 92, 69, 83, 0, 82, 81, 0, 0, 116, 104, 0, 95, 0, 91, 98, 0, 85, 89, 79, 78, 100, 99, 0, 0, 97, 96 @@ -680,44 +680,44 @@ static const yytype_int16 yydefgoto[] = { -1, 1, 2, 3, 35, 72, 55, 36, 64, 65, 66, 75, 38, 39, 40, 41, 42, 67, 86, 87, - 43, 114, 69, 105, 106, 126, 127, 128, 129, 151, + 43, 114, 69, 105, 106, 125, 126, 127, 128, 151, 152, 44, 144, 145, 54, 76, 77, 78, 107, 108, - 109, 110, 123, 45, 94, 46 + 109, 110, 122, 45, 94, 46 }; /* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing STATE-NUM. */ -#define YYPACT_NINF -135 +#define YYPACT_NINF -134 static const yytype_int16 yypact[] = { - -135, 11, -135, 312, -135, -135, 24, -135, -135, -135, - -135, -135, -23, -135, -2, -135, -135, -135, -135, -135, - -135, -135, -135, -135, -17, -135, -11, -135, -135, -135, - -3, 16, 26, -135, -135, -135, -135, 34, 482, -135, - -135, -135, -135, -135, -135, -135, -135, -135, -135, -135, - -8, -135, 22, 97, -135, 482, 22, -135, 482, 56, - -135, -135, 12, 10, 50, 49, -135, 34, -13, 15, - -135, -135, 482, -135, 47, -25, 51, 145, -135, -135, - 34, -135, 356, 52, 71, 77, -135, 10, -135, -135, - 34, -135, -135, -135, 68, -135, 193, -135, -135, -135, - 48, -135, 6, 93, 37, 68, 18, 85, 84, -135, - -135, -135, 87, -135, 102, 86, -135, 89, -135, -135, - -135, -135, -135, 90, 88, 401, 94, 100, 101, -135, - -135, 99, -135, 108, -135, -135, -135, -135, 230, -135, - -25, -135, -135, 105, -135, -135, -135, -135, -135, 9, - 42, -135, 28, -135, -135, 445, -135, -135, 119, 125, - -135, -135, 126, -135, 128, -135, -135, 267, -135, -135, - -135, -135, -135, -135, 129, 130, -135, -135 + -134, 16, -134, 312, -134, -134, 20, -134, -134, -134, + -134, -134, -18, -134, -3, -134, -134, -134, -134, -134, + -134, -134, -134, -134, -26, -134, -25, -134, -134, -134, + -7, 5, 27, -134, -134, -134, -134, 46, 482, -134, + -134, -134, -134, -134, -134, -134, -134, -134, -134, -134, + -8, -134, 30, 97, -134, 482, 30, -134, 482, 7, + -134, -134, 12, 10, 42, 55, -134, 46, -15, 15, + -134, -134, 482, -134, 25, 26, 47, 145, -134, -134, + 46, -134, 356, 39, 71, 77, -134, 10, -134, -134, + 46, -134, -134, -134, -134, -134, 193, -134, -134, -134, + 75, -134, 6, 95, 43, -134, 28, 86, 85, -134, + -134, -134, 88, -134, 103, 87, -134, 91, -134, -134, + -134, -134, -23, 90, 401, 94, 101, 102, -134, -134, + 98, -134, 108, -134, -134, 109, -134, 230, -134, 26, + -134, -134, -134, 134, -134, -134, -134, -134, -134, 9, + 48, -134, 35, -134, -134, 445, -134, -134, 125, 126, + -134, -134, 128, -134, 129, -134, -134, 267, -134, -134, + -134, -134, -134, -134, 130, 131, -134, -134 }; /* YYPGOTO[NTERM-NUM]. */ static const yytype_int16 yypgoto[] = { - -135, -135, 179, -135, -135, -135, -135, -47, -135, -135, - 91, 0, -58, -37, -135, -135, -135, -73, -135, -135, - -48, -32, -135, -38, -135, -134, -135, -135, 29, -63, - -135, -135, -135, -135, -20, -135, -135, 106, -135, -135, - 45, 95, 82, -135, -135, -135 + -134, -134, 180, -134, -134, -134, -134, -33, -134, -134, + 93, 0, -58, -37, -134, -134, -134, -73, -134, -134, + -54, -32, -134, -81, -134, -133, -134, -134, 29, -50, + -134, -134, -134, -134, -20, -134, -134, 110, -134, -134, + 49, 96, 80, -134, -134, -134 }; /* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If @@ -727,26 +727,26 @@ static const yytype_int16 yypgoto[] = #define YYTABLE_NINF -109 static const yytype_int16 yytable[] = { - 82, 70, 104, 37, 159, 68, 57, 131, 79, 49, - 162, 4, 100, 84, 50, 88, 101, 92, 10, 93, - 52, 51, 102, 63, 71, 97, 56, 103, 20, 104, - 85, 104, 73, 175, 53, 91, 81, 29, 125, 120, - 53, 33, -93, 132, 58, 70, 147, 101, 95, 61, - 163, 137, 150, 102, 63, 80, 149, 63, -93, 62, - 63, 166, 96, 59, 133, 138, 135, 104, 47, 48, - 60, 61, 80, 53, 132, 167, 150, 150, 101, 147, - 125, 62, 63, 163, 102, 63, 164, 165, 70, 149, - 63, 98, 99, 83, 89, 90, 111, 125, 74, 122, - 103, 117, 7, 8, 9, 10, 11, 12, 13, 125, + 82, 70, 104, 37, 159, 68, 57, 130, 142, 88, + 162, 52, 56, 84, 49, 92, 4, 93, 10, 50, + 51, 132, 79, 134, 71, 53, 53, 143, 20, 104, + 85, 104, 73, 120, 175, 91, 81, 29, 124, 97, + 58, 33, -93, 131, 83, 70, 147, 101, 95, 61, + 163, 150, 59, 102, 63, 80, 149, 63, -93, 62, + 63, 136, 96, 100, 47, 48, 104, 101, 166, 98, + 99, 60, 80, 102, 63, 137, 150, 150, 103, 124, + 131, 53, 167, 61, 101, 147, 89, 70, 117, 163, + 102, 63, 111, 62, 63, 149, 63, 124, 74, 164, + 165, 90, 7, 8, 9, 10, 11, 12, 13, 124, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, - 118, 26, 27, 28, 29, 30, 119, 134, 33, 139, - 140, 98, 92, 142, -22, 141, 154, 146, 34, 161, - 143, -22, -107, 153, -22, -22, 112, 155, 156, -22, + 118, 26, 27, 28, 29, 30, 119, 103, 33, 133, + 138, 139, 98, 92, -22, 141, 140, 154, 34, 146, + 142, -22, -107, 153, -22, -22, 112, 156, 155, -22, 7, 8, 9, 10, 11, 12, 13, 157, 15, 16, - 17, 18, 19, 20, 21, 22, 23, 24, 170, 26, - 27, 28, 29, 30, 171, 172, 33, 173, 176, 177, - 5, 121, -22, 113, 169, 160, 34, 136, 0, -22, - -108, 0, -22, -22, 124, 130, 0, -22, 7, 8, + 17, 18, 19, 20, 21, 22, 23, 24, 161, 26, + 27, 28, 29, 30, 170, 171, 33, 172, 173, 176, + 177, 5, -22, 121, 169, 135, 34, 113, 160, -22, + -108, 0, -22, -22, 123, 0, 129, -22, 7, 8, 9, 10, 11, 12, 13, 0, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 0, 26, 27, 28, 29, 30, 0, 0, 33, 0, 0, 0, 0, -86, @@ -784,26 +784,26 @@ static const yytype_int16 yytable[] = static const yytype_int16 yycheck[] = { - 58, 38, 75, 3, 138, 37, 26, 1, 55, 32, - 1, 0, 37, 1, 37, 63, 41, 30, 8, 32, - 37, 23, 47, 48, 32, 72, 37, 52, 18, 102, - 62, 104, 52, 167, 51, 67, 56, 27, 96, 87, - 51, 31, 33, 37, 47, 82, 37, 41, 33, 37, - 41, 33, 125, 47, 48, 55, 47, 48, 49, 47, - 48, 33, 47, 47, 102, 47, 104, 140, 44, 45, - 44, 37, 72, 51, 37, 47, 149, 150, 41, 37, - 138, 47, 48, 41, 47, 48, 149, 150, 125, 47, - 48, 44, 45, 37, 44, 46, 45, 155, 1, 31, - 52, 49, 5, 6, 7, 8, 9, 10, 11, 167, + 58, 38, 75, 3, 137, 37, 26, 1, 31, 63, + 1, 37, 37, 1, 32, 30, 0, 32, 8, 37, + 23, 102, 55, 104, 32, 51, 51, 50, 18, 102, + 62, 104, 52, 87, 167, 67, 56, 27, 96, 72, + 47, 31, 33, 37, 37, 82, 37, 41, 33, 37, + 41, 124, 47, 47, 48, 55, 47, 48, 49, 47, + 48, 33, 47, 37, 44, 45, 139, 41, 33, 44, + 45, 44, 72, 47, 48, 47, 149, 150, 52, 137, + 37, 51, 47, 37, 41, 37, 44, 124, 49, 41, + 47, 48, 45, 47, 48, 47, 48, 155, 1, 149, + 150, 46, 5, 6, 7, 8, 9, 10, 11, 167, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, - 49, 24, 25, 26, 27, 28, 49, 34, 31, 44, - 46, 44, 30, 44, 37, 49, 36, 49, 41, 34, - 50, 44, 45, 49, 47, 48, 1, 46, 49, 52, + 49, 24, 25, 26, 27, 28, 49, 52, 31, 34, + 44, 46, 44, 30, 37, 44, 49, 36, 41, 49, + 31, 44, 45, 49, 47, 48, 1, 49, 46, 52, 5, 6, 7, 8, 9, 10, 11, 49, 13, 14, - 15, 16, 17, 18, 19, 20, 21, 22, 49, 24, + 15, 16, 17, 18, 19, 20, 21, 22, 34, 24, 25, 26, 27, 28, 49, 49, 31, 49, 49, 49, - 1, 90, 37, 77, 155, 140, 41, 105, -1, 44, - 45, -1, 47, 48, 1, 100, -1, 52, 5, 6, + 49, 1, 37, 90, 155, 105, 41, 77, 139, 44, + 45, -1, 47, 48, 1, -1, 100, 52, 5, 6, 7, 8, 9, 10, 11, -1, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, -1, 24, 25, 26, 27, 28, -1, -1, 31, -1, -1, -1, -1, 36, @@ -855,9 +855,9 @@ static const yytype_uint8 yystos[] = 46, 74, 30, 32, 97, 33, 47, 60, 44, 45, 37, 41, 47, 52, 70, 76, 77, 91, 92, 93, 94, 45, 1, 90, 74, 48, 49, 49, 49, 49, - 73, 63, 31, 95, 1, 65, 78, 79, 80, 81, - 94, 1, 37, 76, 34, 76, 95, 33, 47, 44, - 46, 49, 44, 50, 85, 86, 49, 37, 41, 47, + 73, 63, 95, 1, 65, 78, 79, 80, 81, 94, + 1, 37, 76, 34, 76, 95, 33, 47, 44, 46, + 49, 44, 31, 50, 85, 86, 49, 37, 41, 47, 70, 82, 83, 49, 36, 46, 49, 49, 1, 78, 93, 34, 1, 41, 82, 82, 33, 47, 36, 81, 49, 49, 49, 49, 1, 78, 49, 49 diff --git a/scripts/genksyms/parse.y b/scripts/genksyms/parse.y index 408cdf82b27..10d7dc724b6 100644 --- a/scripts/genksyms/parse.y +++ b/scripts/genksyms/parse.y @@ -446,7 +446,7 @@ member_bitfield_declarator: attribute_opt: /* empty */ { $$ = NULL; } - | ATTRIBUTE_PHRASE + | attribute_opt ATTRIBUTE_PHRASE ; asm_definition: -- GitLab From 3b40d38120c32798a4be8d8052f028deeca9d581 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Mon, 21 Jul 2008 04:28:25 +0200 Subject: [PATCH 0478/1024] kbuild: genksyms: Include extern information in dumps The extern flag currently is not included in type dump files (genksyms --dump-types). Include that flag there for completeness. Signed-off-by: Andreas Gruenbacher Signed-off-by: Sam Ravnborg --- scripts/genksyms/genksyms.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c index 4f8a3007e45..c249274e005 100644 --- a/scripts/genksyms/genksyms.c +++ b/scripts/genksyms/genksyms.c @@ -545,6 +545,8 @@ int main(int argc, char **argv) } fputs(sym->name, dumpfile); putc(' ', dumpfile); + if (sym->is_extern) + fputs("extern ", dumpfile); print_list(dumpfile, sym->defn); putc('\n', dumpfile); -- GitLab From 0fe9f15ee8bd652242a778ddfd30aa6d97a98e23 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Thu, 31 Jul 2008 22:10:10 +0200 Subject: [PATCH 0479/1024] via-velocity: separated struct allow wholesale copy during MTU changes. It should help people fix the bugs in my code :o) Signed-off-by: Francois Romieu Signed-off-by: Andrew Morton --- drivers/net/via-velocity.c | 173 +++++++++++++++++++------------------ drivers/net/via-velocity.h | 50 ++++++----- 2 files changed, 114 insertions(+), 109 deletions(-) diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 370ce30f2f4..ad3c6733bde 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -677,16 +677,16 @@ static void velocity_rx_reset(struct velocity_info *vptr) struct mac_regs __iomem * regs = vptr->mac_regs; int i; - vptr->rd_dirty = vptr->rd_filled = vptr->rd_curr = 0; + vptr->rx.dirty = vptr->rx.filled = vptr->rx.curr = 0; /* * Init state, all RD entries belong to the NIC */ for (i = 0; i < vptr->options.numrx; ++i) - vptr->rd_ring[i].rdesc0.len |= OWNED_BY_NIC; + vptr->rx.ring[i].rdesc0.len |= OWNED_BY_NIC; writew(vptr->options.numrx, ®s->RBRDU); - writel(vptr->rd_pool_dma, ®s->RDBaseLo); + writel(vptr->rx.pool_dma, ®s->RDBaseLo); writew(0, ®s->RDIdx); writew(vptr->options.numrx - 1, ®s->RDCSize); } @@ -779,15 +779,15 @@ static void velocity_init_registers(struct velocity_info *vptr, vptr->int_mask = INT_MASK_DEF; - writel(vptr->rd_pool_dma, ®s->RDBaseLo); + writel(vptr->rx.pool_dma, ®s->RDBaseLo); writew(vptr->options.numrx - 1, ®s->RDCSize); mac_rx_queue_run(regs); mac_rx_queue_wake(regs); writew(vptr->options.numtx - 1, ®s->TDCSize); - for (i = 0; i < vptr->num_txq; i++) { - writel(vptr->td_pool_dma[i], ®s->TDBaseLo[i]); + for (i = 0; i < vptr->tx.numq; i++) { + writel(vptr->tx.pool_dma[i], ®s->TDBaseLo[i]); mac_tx_queue_run(regs, i); } @@ -1047,7 +1047,7 @@ static void __devinit velocity_init_info(struct pci_dev *pdev, vptr->pdev = pdev; vptr->chip_id = info->chip_id; - vptr->num_txq = info->txqueue; + vptr->tx.numq = info->txqueue; vptr->multicast_limit = MCAM_SIZE; spin_lock_init(&vptr->lock); INIT_LIST_HEAD(&vptr->list); @@ -1116,7 +1116,7 @@ static int velocity_init_rings(struct velocity_info *vptr) * pci_alloc_consistent() fulfills the requirement for 64 bytes * alignment */ - pool = pci_alloc_consistent(pdev, tx_ring_size * vptr->num_txq + + pool = pci_alloc_consistent(pdev, tx_ring_size * vptr->tx.numq + rx_ring_size, &pool_dma); if (!pool) { dev_err(&pdev->dev, "%s : DMA memory allocation failed.\n", @@ -1124,15 +1124,15 @@ static int velocity_init_rings(struct velocity_info *vptr) return -ENOMEM; } - vptr->rd_ring = pool; - vptr->rd_pool_dma = pool_dma; + vptr->rx.ring = pool; + vptr->rx.pool_dma = pool_dma; pool += rx_ring_size; pool_dma += rx_ring_size; - for (i = 0; i < vptr->num_txq; i++) { - vptr->td_rings[i] = pool; - vptr->td_pool_dma[i] = pool_dma; + for (i = 0; i < vptr->tx.numq; i++) { + vptr->tx.rings[i] = pool; + vptr->tx.pool_dma[i] = pool_dma; pool += tx_ring_size; pool_dma += tx_ring_size; } @@ -1150,9 +1150,9 @@ static int velocity_init_rings(struct velocity_info *vptr) static void velocity_free_rings(struct velocity_info *vptr) { const int size = vptr->options.numrx * sizeof(struct rx_desc) + - vptr->options.numtx * sizeof(struct tx_desc) * vptr->num_txq; + vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq; - pci_free_consistent(vptr->pdev, size, vptr->rd_ring, vptr->rd_pool_dma); + pci_free_consistent(vptr->pdev, size, vptr->rx.ring, vptr->rx.pool_dma); } static void velocity_give_many_rx_descs(struct velocity_info *vptr) @@ -1164,44 +1164,44 @@ static void velocity_give_many_rx_descs(struct velocity_info *vptr) * RD number must be equal to 4X per hardware spec * (programming guide rev 1.20, p.13) */ - if (vptr->rd_filled < 4) + if (vptr->rx.filled < 4) return; wmb(); - unusable = vptr->rd_filled & 0x0003; - dirty = vptr->rd_dirty - unusable; - for (avail = vptr->rd_filled & 0xfffc; avail; avail--) { + unusable = vptr->rx.filled & 0x0003; + dirty = vptr->rx.dirty - unusable; + for (avail = vptr->rx.filled & 0xfffc; avail; avail--) { dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1; - vptr->rd_ring[dirty].rdesc0.len |= OWNED_BY_NIC; + vptr->rx.ring[dirty].rdesc0.len |= OWNED_BY_NIC; } - writew(vptr->rd_filled & 0xfffc, ®s->RBRDU); - vptr->rd_filled = unusable; + writew(vptr->rx.filled & 0xfffc, ®s->RBRDU); + vptr->rx.filled = unusable; } static int velocity_rx_refill(struct velocity_info *vptr) { - int dirty = vptr->rd_dirty, done = 0; + int dirty = vptr->rx.dirty, done = 0; do { - struct rx_desc *rd = vptr->rd_ring + dirty; + struct rx_desc *rd = vptr->rx.ring + dirty; /* Fine for an all zero Rx desc at init time as well */ if (rd->rdesc0.len & OWNED_BY_NIC) break; - if (!vptr->rd_info[dirty].skb) { + if (!vptr->rx.info[dirty].skb) { if (velocity_alloc_rx_buf(vptr, dirty) < 0) break; } done++; dirty = (dirty < vptr->options.numrx - 1) ? dirty + 1 : 0; - } while (dirty != vptr->rd_curr); + } while (dirty != vptr->rx.curr); if (done) { - vptr->rd_dirty = dirty; - vptr->rd_filled += done; + vptr->rx.dirty = dirty; + vptr->rx.filled += done; } return done; @@ -1209,7 +1209,7 @@ static int velocity_rx_refill(struct velocity_info *vptr) static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu) { - vptr->rx_buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32; + vptr->rx.buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32; } /** @@ -1224,12 +1224,12 @@ static int velocity_init_rd_ring(struct velocity_info *vptr) { int ret = -ENOMEM; - vptr->rd_info = kcalloc(vptr->options.numrx, + vptr->rx.info = kcalloc(vptr->options.numrx, sizeof(struct velocity_rd_info), GFP_KERNEL); - if (!vptr->rd_info) + if (!vptr->rx.info) goto out; - vptr->rd_filled = vptr->rd_dirty = vptr->rd_curr = 0; + vptr->rx.filled = vptr->rx.dirty = vptr->rx.curr = 0; if (velocity_rx_refill(vptr) != vptr->options.numrx) { VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR @@ -1255,18 +1255,18 @@ static void velocity_free_rd_ring(struct velocity_info *vptr) { int i; - if (vptr->rd_info == NULL) + if (vptr->rx.info == NULL) return; for (i = 0; i < vptr->options.numrx; i++) { - struct velocity_rd_info *rd_info = &(vptr->rd_info[i]); - struct rx_desc *rd = vptr->rd_ring + i; + struct velocity_rd_info *rd_info = &(vptr->rx.info[i]); + struct rx_desc *rd = vptr->rx.ring + i; memset(rd, 0, sizeof(*rd)); if (!rd_info->skb) continue; - pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx_buf_sz, + pci_unmap_single(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz, PCI_DMA_FROMDEVICE); rd_info->skb_dma = (dma_addr_t) NULL; @@ -1274,8 +1274,8 @@ static void velocity_free_rd_ring(struct velocity_info *vptr) rd_info->skb = NULL; } - kfree(vptr->rd_info); - vptr->rd_info = NULL; + kfree(vptr->rx.info); + vptr->rx.info = NULL; } /** @@ -1293,19 +1293,19 @@ static int velocity_init_td_ring(struct velocity_info *vptr) unsigned int j; /* Init the TD ring entries */ - for (j = 0; j < vptr->num_txq; j++) { - curr = vptr->td_pool_dma[j]; + for (j = 0; j < vptr->tx.numq; j++) { + curr = vptr->tx.pool_dma[j]; - vptr->td_infos[j] = kcalloc(vptr->options.numtx, + vptr->tx.infos[j] = kcalloc(vptr->options.numtx, sizeof(struct velocity_td_info), GFP_KERNEL); - if (!vptr->td_infos[j]) { + if (!vptr->tx.infos[j]) { while(--j >= 0) - kfree(vptr->td_infos[j]); + kfree(vptr->tx.infos[j]); return -ENOMEM; } - vptr->td_tail[j] = vptr->td_curr[j] = vptr->td_used[j] = 0; + vptr->tx.tail[j] = vptr->tx.curr[j] = vptr->tx.used[j] = 0; } return 0; } @@ -1317,7 +1317,7 @@ static int velocity_init_td_ring(struct velocity_info *vptr) static void velocity_free_td_ring_entry(struct velocity_info *vptr, int q, int n) { - struct velocity_td_info * td_info = &(vptr->td_infos[q][n]); + struct velocity_td_info * td_info = &(vptr->tx.infos[q][n]); int i; if (td_info == NULL) @@ -1349,15 +1349,15 @@ static void velocity_free_td_ring(struct velocity_info *vptr) { int i, j; - for (j = 0; j < vptr->num_txq; j++) { - if (vptr->td_infos[j] == NULL) + for (j = 0; j < vptr->tx.numq; j++) { + if (vptr->tx.infos[j] == NULL) continue; for (i = 0; i < vptr->options.numtx; i++) { velocity_free_td_ring_entry(vptr, j, i); } - kfree(vptr->td_infos[j]); - vptr->td_infos[j] = NULL; + kfree(vptr->tx.infos[j]); + vptr->tx.infos[j] = NULL; } } @@ -1374,13 +1374,13 @@ static void velocity_free_td_ring(struct velocity_info *vptr) static int velocity_rx_srv(struct velocity_info *vptr, int status) { struct net_device_stats *stats = &vptr->stats; - int rd_curr = vptr->rd_curr; + int rd_curr = vptr->rx.curr; int works = 0; do { - struct rx_desc *rd = vptr->rd_ring + rd_curr; + struct rx_desc *rd = vptr->rx.ring + rd_curr; - if (!vptr->rd_info[rd_curr].skb) + if (!vptr->rx.info[rd_curr].skb) break; if (rd->rdesc0.len & OWNED_BY_NIC) @@ -1412,7 +1412,7 @@ static int velocity_rx_srv(struct velocity_info *vptr, int status) rd_curr = 0; } while (++works <= 15); - vptr->rd_curr = rd_curr; + vptr->rx.curr = rd_curr; if ((works > 0) && (velocity_rx_refill(vptr) > 0)) velocity_give_many_rx_descs(vptr); @@ -1510,8 +1510,8 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx) { void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int); struct net_device_stats *stats = &vptr->stats; - struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]); - struct rx_desc *rd = &(vptr->rd_ring[idx]); + struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]); + struct rx_desc *rd = &(vptr->rx.ring[idx]); int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff; struct sk_buff *skb; @@ -1527,7 +1527,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx) skb = rd_info->skb; pci_dma_sync_single_for_cpu(vptr->pdev, rd_info->skb_dma, - vptr->rx_buf_sz, PCI_DMA_FROMDEVICE); + vptr->rx.buf_sz, PCI_DMA_FROMDEVICE); /* * Drop frame not meeting IEEE 802.3 @@ -1550,7 +1550,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx) rd_info->skb = NULL; } - pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx_buf_sz, + pci_action(vptr->pdev, rd_info->skb_dma, vptr->rx.buf_sz, PCI_DMA_FROMDEVICE); skb_put(skb, pkt_len - 4); @@ -1580,10 +1580,10 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx) static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx) { - struct rx_desc *rd = &(vptr->rd_ring[idx]); - struct velocity_rd_info *rd_info = &(vptr->rd_info[idx]); + struct rx_desc *rd = &(vptr->rx.ring[idx]); + struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]); - rd_info->skb = netdev_alloc_skb(vptr->dev, vptr->rx_buf_sz + 64); + rd_info->skb = dev_alloc_skb(vptr->rx.buf_sz + 64); if (rd_info->skb == NULL) return -ENOMEM; @@ -1592,14 +1592,15 @@ static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx) * 64byte alignment. */ skb_reserve(rd_info->skb, (unsigned long) rd_info->skb->data & 63); - rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data, vptr->rx_buf_sz, PCI_DMA_FROMDEVICE); + rd_info->skb_dma = pci_map_single(vptr->pdev, rd_info->skb->data, + vptr->rx.buf_sz, PCI_DMA_FROMDEVICE); /* * Fill in the descriptor to match - */ + */ *((u32 *) & (rd->rdesc0)) = 0; - rd->size = cpu_to_le16(vptr->rx_buf_sz) | RX_INTEN; + rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN; rd->pa_low = cpu_to_le32(rd_info->skb_dma); rd->pa_high = 0; return 0; @@ -1625,15 +1626,15 @@ static int velocity_tx_srv(struct velocity_info *vptr, u32 status) struct velocity_td_info *tdinfo; struct net_device_stats *stats = &vptr->stats; - for (qnum = 0; qnum < vptr->num_txq; qnum++) { - for (idx = vptr->td_tail[qnum]; vptr->td_used[qnum] > 0; + for (qnum = 0; qnum < vptr->tx.numq; qnum++) { + for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0; idx = (idx + 1) % vptr->options.numtx) { /* * Get Tx Descriptor */ - td = &(vptr->td_rings[qnum][idx]); - tdinfo = &(vptr->td_infos[qnum][idx]); + td = &(vptr->tx.rings[qnum][idx]); + tdinfo = &(vptr->tx.infos[qnum][idx]); if (td->tdesc0.len & OWNED_BY_NIC) break; @@ -1657,9 +1658,9 @@ static int velocity_tx_srv(struct velocity_info *vptr, u32 status) stats->tx_bytes += tdinfo->skb->len; } velocity_free_tx_buf(vptr, tdinfo); - vptr->td_used[qnum]--; + vptr->tx.used[qnum]--; } - vptr->td_tail[qnum] = idx; + vptr->tx.tail[qnum] = idx; if (AVAIL_TD(vptr, qnum) < 1) { full = 1; @@ -2056,9 +2057,9 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev) spin_lock_irqsave(&vptr->lock, flags); - index = vptr->td_curr[qnum]; - td_ptr = &(vptr->td_rings[qnum][index]); - tdinfo = &(vptr->td_infos[qnum][index]); + index = vptr->tx.curr[qnum]; + td_ptr = &(vptr->tx.rings[qnum][index]); + tdinfo = &(vptr->tx.infos[qnum][index]); td_ptr->tdesc1.TCR = TCR0_TIC; td_ptr->td_buf[0].size &= ~TD_QUEUE; @@ -2071,9 +2072,9 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev) skb_copy_from_linear_data(skb, tdinfo->buf, skb->len); tdinfo->skb_dma[0] = tdinfo->buf_dma; td_ptr->tdesc0.len = len; - td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]); - td_ptr->td_buf[0].pa_high = 0; - td_ptr->td_buf[0].size = len; /* queue is 0 anyway */ + td_ptr->tx.buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]); + td_ptr->tx.buf[0].pa_high = 0; + td_ptr->tx.buf[0].size = len; /* queue is 0 anyway */ tdinfo->nskb_dma = 1; } else { int i = 0; @@ -2084,9 +2085,9 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev) td_ptr->tdesc0.len = len; /* FIXME: support 48bit DMA later */ - td_ptr->td_buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma); - td_ptr->td_buf[i].pa_high = 0; - td_ptr->td_buf[i].size = cpu_to_le16(skb_headlen(skb)); + td_ptr->tx.buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma); + td_ptr->tx.buf[i].pa_high = 0; + td_ptr->tx.buf[i].size = cpu_to_le16(skb_headlen(skb)); for (i = 0; i < nfrags; i++) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; @@ -2094,9 +2095,9 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev) tdinfo->skb_dma[i + 1] = pci_map_single(vptr->pdev, addr, frag->size, PCI_DMA_TODEVICE); - td_ptr->td_buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]); - td_ptr->td_buf[i + 1].pa_high = 0; - td_ptr->td_buf[i + 1].size = cpu_to_le16(frag->size); + td_ptr->tx.buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]); + td_ptr->tx.buf[i + 1].pa_high = 0; + td_ptr->tx.buf[i + 1].size = cpu_to_le16(frag->size); } tdinfo->nskb_dma = i - 1; } @@ -2142,13 +2143,13 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev) if (prev < 0) prev = vptr->options.numtx - 1; td_ptr->tdesc0.len |= OWNED_BY_NIC; - vptr->td_used[qnum]++; - vptr->td_curr[qnum] = (index + 1) % vptr->options.numtx; + vptr->tx.used[qnum]++; + vptr->tx.curr[qnum] = (index + 1) % vptr->options.numtx; if (AVAIL_TD(vptr, qnum) < 1) netif_stop_queue(dev); - td_ptr = &(vptr->td_rings[qnum][prev]); + td_ptr = &(vptr->tx.rings[qnum][prev]); td_ptr->td_buf[0].size |= TD_QUEUE; mac_tx_queue_wake(vptr->mac_regs, qnum); } @@ -3405,8 +3406,8 @@ static int velocity_resume(struct pci_dev *pdev) velocity_tx_srv(vptr, 0); - for (i = 0; i < vptr->num_txq; i++) { - if (vptr->td_used[i]) { + for (i = 0; i < vptr->tx.numq; i++) { + if (vptr->tx.used[i]) { mac_tx_queue_wake(vptr->mac_regs, i); } } diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h index 86446147284..1b95b04c925 100644 --- a/drivers/net/via-velocity.h +++ b/drivers/net/via-velocity.h @@ -1494,6 +1494,10 @@ struct velocity_opt { u32 flags; }; +#define AVAIL_TD(p,q) ((p)->options.numtx-((p)->tx.used[(q)])) + +#define GET_RD_BY_IDX(vptr, idx) (vptr->rd_ring[idx]) + struct velocity_info { struct list_head list; @@ -1501,9 +1505,6 @@ struct velocity_info { struct net_device *dev; struct net_device_stats stats; - dma_addr_t rd_pool_dma; - dma_addr_t td_pool_dma[TX_QUEUE_NO]; - struct vlan_group *vlgrp; u8 ip_addr[4]; enum chip_type chip_id; @@ -1512,25 +1513,29 @@ struct velocity_info { unsigned long memaddr; unsigned long ioaddr; - u8 rev_id; - -#define AVAIL_TD(p,q) ((p)->options.numtx-((p)->td_used[(q)])) + struct tx_info { + int numq; + + /* FIXME: the locality of the data seems rather poor. */ + int used[TX_QUEUE_NO]; + int curr[TX_QUEUE_NO]; + int tail[TX_QUEUE_NO]; + struct tx_desc *rings[TX_QUEUE_NO]; + struct velocity_td_info *infos[TX_QUEUE_NO]; + dma_addr_t pool_dma[TX_QUEUE_NO]; + } tx; + + struct rx_info { + int buf_sz; + + int dirty; + int curr; + u32 filled; + struct rx_desc *ring; + struct velocity_rd_info *info; /* It's an array */ + dma_addr_t pool_dma; + } rx; - int num_txq; - - volatile int td_used[TX_QUEUE_NO]; - int td_curr[TX_QUEUE_NO]; - int td_tail[TX_QUEUE_NO]; - struct tx_desc *td_rings[TX_QUEUE_NO]; - struct velocity_td_info *td_infos[TX_QUEUE_NO]; - - int rd_curr; - int rd_dirty; - u32 rd_filled; - struct rx_desc *rd_ring; - struct velocity_rd_info *rd_info; /* It's an array */ - -#define GET_RD_BY_IDX(vptr, idx) (vptr->rd_ring[idx]) u32 mib_counter[MAX_HW_MIB_COUNTER]; struct velocity_opt options; @@ -1538,7 +1543,6 @@ struct velocity_info { u32 flags; - int rx_buf_sz; u32 mii_status; u32 phy_id; int multicast_limit; @@ -1554,8 +1558,8 @@ struct velocity_info { struct velocity_context context; u32 ticks; - u32 rx_bytes; + u8 rev_id; }; /** -- GitLab From 3c4dc7115dfdb9e0450b7a3b0649948f5356d4af Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Thu, 31 Jul 2008 22:51:18 +0200 Subject: [PATCH 0480/1024] via-velocity: velocity_init_{rd/tx}_ring use kcalloc(..., GFP_KERNEL). Allocate and free everyting outside of the locked section. Spotted-by: Arjan van de Ven Signed-off-by: Francois Romieu Fixed-by: Seguier Regis Signed-off-by: Andrew Morton --- drivers/net/via-velocity.c | 132 ++++++++++++++++++++++++------------- 1 file changed, 86 insertions(+), 46 deletions(-) diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index ad3c6733bde..007c1297006 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -662,6 +662,10 @@ static void velocity_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid spin_unlock_irq(&vptr->lock); } +static void velocity_init_rx_ring_indexes(struct velocity_info *vptr) +{ + vptr->rx.dirty = vptr->rx.filled = vptr->rx.curr = 0; +} /** * velocity_rx_reset - handle a receive reset @@ -677,7 +681,7 @@ static void velocity_rx_reset(struct velocity_info *vptr) struct mac_regs __iomem * regs = vptr->mac_regs; int i; - vptr->rx.dirty = vptr->rx.filled = vptr->rx.curr = 0; + velocity_init_rx_ring_indexes(vptr); /* * Init state, all RD entries belong to the NIC @@ -1093,14 +1097,14 @@ static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pc } /** - * velocity_init_rings - set up DMA rings + * velocity_init_dma_rings - set up DMA rings * @vptr: Velocity to set up * * Allocate PCI mapped DMA rings for the receive and transmit layer * to use. */ -static int velocity_init_rings(struct velocity_info *vptr) +static int velocity_init_dma_rings(struct velocity_info *vptr) { struct velocity_opt *opt = &vptr->options; const unsigned int rx_ring_size = opt->numrx * sizeof(struct rx_desc); @@ -1141,13 +1145,13 @@ static int velocity_init_rings(struct velocity_info *vptr) } /** - * velocity_free_rings - free PCI ring pointers + * velocity_free_dma_rings - free PCI ring pointers * @vptr: Velocity to free from * * Clean up the PCI ring buffers allocated to this velocity. */ -static void velocity_free_rings(struct velocity_info *vptr) +static void velocity_free_dma_rings(struct velocity_info *vptr) { const int size = vptr->options.numrx * sizeof(struct rx_desc) + vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq; @@ -1229,7 +1233,7 @@ static int velocity_init_rd_ring(struct velocity_info *vptr) if (!vptr->rx.info) goto out; - vptr->rx.filled = vptr->rx.dirty = vptr->rx.curr = 0; + velocity_init_rx_ring_indexes(vptr); if (velocity_rx_refill(vptr) != vptr->options.numrx) { VELOCITY_PRT(MSG_LEVEL_ERR, KERN_ERR @@ -1847,6 +1851,40 @@ static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_ tdinfo->skb = NULL; } +static int velocity_init_rings(struct velocity_info *vptr, int mtu) +{ + int ret; + + velocity_set_rxbufsize(vptr, mtu); + + ret = velocity_init_dma_rings(vptr); + if (ret < 0) + goto out; + + ret = velocity_init_rd_ring(vptr); + if (ret < 0) + goto err_free_dma_rings_0; + + ret = velocity_init_td_ring(vptr); + if (ret < 0) + goto err_free_rd_ring_1; +out: + return ret; + +err_free_rd_ring_1: + velocity_free_rd_ring(vptr); +err_free_dma_rings_0: + velocity_free_dma_rings(vptr); + goto out; +} + +static void velocity_free_rings(struct velocity_info *vptr) +{ + velocity_free_td_ring(vptr); + velocity_free_rd_ring(vptr); + velocity_free_dma_rings(vptr); +} + /** * velocity_open - interface activation callback * @dev: network layer device to open @@ -1863,20 +1901,10 @@ static int velocity_open(struct net_device *dev) struct velocity_info *vptr = netdev_priv(dev); int ret; - velocity_set_rxbufsize(vptr, dev->mtu); - - ret = velocity_init_rings(vptr); + ret = velocity_init_rings(vptr, dev->mtu); if (ret < 0) goto out; - ret = velocity_init_rd_ring(vptr); - if (ret < 0) - goto err_free_desc_rings; - - ret = velocity_init_td_ring(vptr); - if (ret < 0) - goto err_free_rd_ring; - /* Ensure chip is running */ pci_set_power_state(vptr->pdev, PCI_D0); @@ -1889,7 +1917,8 @@ static int velocity_open(struct net_device *dev) if (ret < 0) { /* Power down the chip */ pci_set_power_state(vptr->pdev, PCI_D3hot); - goto err_free_td_ring; + velocity_free_rings(vptr); + goto out; } mac_enable_int(vptr->mac_regs); @@ -1897,14 +1926,6 @@ static int velocity_open(struct net_device *dev) vptr->flags |= VELOCITY_FLAGS_OPENED; out: return ret; - -err_free_td_ring: - velocity_free_td_ring(vptr); -err_free_rd_ring: - velocity_free_rd_ring(vptr); -err_free_desc_rings: - velocity_free_rings(vptr); - goto out; } /** @@ -1920,50 +1941,72 @@ err_free_desc_rings: static int velocity_change_mtu(struct net_device *dev, int new_mtu) { struct velocity_info *vptr = netdev_priv(dev); - unsigned long flags; - int oldmtu = dev->mtu; int ret = 0; if ((new_mtu < VELOCITY_MIN_MTU) || new_mtu > (VELOCITY_MAX_MTU)) { VELOCITY_PRT(MSG_LEVEL_ERR, KERN_NOTICE "%s: Invalid MTU.\n", vptr->dev->name); - return -EINVAL; + ret = -EINVAL; + goto out_0; } if (!netif_running(dev)) { dev->mtu = new_mtu; - return 0; + goto out_0; } - if (new_mtu != oldmtu) { + if (dev->mtu != new_mtu) { + struct velocity_info *tmp_vptr; + unsigned long flags; + struct rx_info rx; + struct tx_info tx; + + tmp_vptr = kzalloc(sizeof(*tmp_vptr), GFP_KERNEL); + if (!tmp_vptr) { + ret = -ENOMEM; + goto out_0; + } + + tmp_vptr->dev = dev; + tmp_vptr->pdev = vptr->pdev; + tmp_vptr->options = vptr->options; + tmp_vptr->tx.numq = vptr->tx.numq; + + ret = velocity_init_rings(tmp_vptr, new_mtu); + if (ret < 0) + goto out_free_tmp_vptr_1; + spin_lock_irqsave(&vptr->lock, flags); netif_stop_queue(dev); velocity_shutdown(vptr); - velocity_free_td_ring(vptr); - velocity_free_rd_ring(vptr); + rx = vptr->rx; + tx = vptr->tx; - dev->mtu = new_mtu; + vptr->rx = tmp_vptr->rx; + vptr->tx = tmp_vptr->tx; - velocity_set_rxbufsize(vptr, new_mtu); + tmp_vptr->rx = rx; + tmp_vptr->tx = tx; - ret = velocity_init_rd_ring(vptr); - if (ret < 0) - goto out_unlock; + dev->mtu = new_mtu; - ret = velocity_init_td_ring(vptr); - if (ret < 0) - goto out_unlock; + velocity_give_many_rx_descs(vptr); velocity_init_registers(vptr, VELOCITY_INIT_COLD); mac_enable_int(vptr->mac_regs); netif_start_queue(dev); -out_unlock: + spin_unlock_irqrestore(&vptr->lock, flags); - } + velocity_free_rings(tmp_vptr); + +out_free_tmp_vptr_1: + kfree(tmp_vptr); + } +out_0: return ret; } @@ -2009,9 +2052,6 @@ static int velocity_close(struct net_device *dev) /* Power down the chip */ pci_set_power_state(vptr->pdev, PCI_D3hot); - /* Free the resources */ - velocity_free_td_ring(vptr); - velocity_free_rd_ring(vptr); velocity_free_rings(vptr); vptr->flags &= (~VELOCITY_FLAGS_OPENED); -- GitLab From 2f0e58ac3ad0bb2ec0924dc11f8e55d01f44ca90 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 31 Jul 2008 21:30:11 +0000 Subject: [PATCH 0481/1024] [CIFS] remove level of indentation from decode_negTokenInit Most of this function takes place inside of an unnecessary "else" clause. The other 2 cases both return 0, so we can remove some indentation here. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/asn1.c | 259 +++++++++++++++++++++++------------------------ fs/cifs/cifsfs.h | 2 +- 2 files changed, 125 insertions(+), 136 deletions(-) diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c index 669d0640b6d..5fabd2caf93 100644 --- a/fs/cifs/asn1.c +++ b/fs/cifs/asn1.c @@ -483,6 +483,7 @@ decode_negTokenInit(unsigned char *security_blob, int length, asn1_open(&ctx, security_blob, length); + /* GSSAPI header */ if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { cFYI(1, ("Error decoding negTokenInit header")); return 0; @@ -490,154 +491,142 @@ decode_negTokenInit(unsigned char *security_blob, int length, || (tag != ASN1_EOC)) { cFYI(1, ("cls = %d con = %d tag = %d", cls, con, tag)); return 0; - } else { - /* remember to free obj->oid */ - rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag); - if (rc) { - if ((tag == ASN1_OJI) && (con == ASN1_PRI) && - (cls == ASN1_UNI)) { - rc = asn1_oid_decode(&ctx, end, &oid, &oidlen); - if (rc) { - rc = compare_oid(oid, oidlen, - SPNEGO_OID, - SPNEGO_OID_LEN); - kfree(oid); - } - } else - rc = 0; - } + } - if (!rc) { - cFYI(1, ("Error decoding negTokenInit header")); - return 0; - } + /* Check for SPNEGO OID -- remember to free obj->oid */ + rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag); + if (rc) { + if ((tag == ASN1_OJI) && (con == ASN1_PRI) && + (cls == ASN1_UNI)) { + rc = asn1_oid_decode(&ctx, end, &oid, &oidlen); + if (rc) { + rc = compare_oid(oid, oidlen, SPNEGO_OID, + SPNEGO_OID_LEN); + kfree(oid); + } + } else + rc = 0; + } - if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { - cFYI(1, ("Error decoding negTokenInit")); - return 0; - } else if ((cls != ASN1_CTX) || (con != ASN1_CON) - || (tag != ASN1_EOC)) { - cFYI(1, - ("cls = %d con = %d tag = %d end = %p (%d) exit 0", - cls, con, tag, end, *end)); - return 0; - } + /* SPNEGO OID not present or garbled -- bail out */ + if (!rc) { + cFYI(1, ("Error decoding negTokenInit header")); + return 0; + } - if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { - cFYI(1, ("Error decoding negTokenInit")); - return 0; - } else if ((cls != ASN1_UNI) || (con != ASN1_CON) - || (tag != ASN1_SEQ)) { - cFYI(1, - ("cls = %d con = %d tag = %d end = %p (%d) exit 1", - cls, con, tag, end, *end)); - return 0; - } + if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { + cFYI(1, ("Error decoding negTokenInit")); + return 0; + } else if ((cls != ASN1_CTX) || (con != ASN1_CON) + || (tag != ASN1_EOC)) { + cFYI(1, + ("cls = %d con = %d tag = %d end = %p (%d) exit 0", + cls, con, tag, end, *end)); + return 0; + } - if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { - cFYI(1, ("Error decoding 2nd part of negTokenInit")); - return 0; - } else if ((cls != ASN1_CTX) || (con != ASN1_CON) - || (tag != ASN1_EOC)) { - cFYI(1, - ("cls = %d con = %d tag = %d end = %p (%d) exit 0", - cls, con, tag, end, *end)); - return 0; - } + if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { + cFYI(1, ("Error decoding negTokenInit")); + return 0; + } else if ((cls != ASN1_UNI) || (con != ASN1_CON) + || (tag != ASN1_SEQ)) { + cFYI(1, + ("cls = %d con = %d tag = %d end = %p (%d) exit 1", + cls, con, tag, end, *end)); + return 0; + } - if (asn1_header_decode - (&ctx, &sequence_end, &cls, &con, &tag) == 0) { - cFYI(1, ("Error decoding 2nd part of negTokenInit")); - return 0; - } else if ((cls != ASN1_UNI) || (con != ASN1_CON) - || (tag != ASN1_SEQ)) { - cFYI(1, - ("cls = %d con = %d tag = %d end = %p (%d) exit 1", - cls, con, tag, end, *end)); - return 0; - } + if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { + cFYI(1, ("Error decoding 2nd part of negTokenInit")); + return 0; + } else if ((cls != ASN1_CTX) || (con != ASN1_CON) + || (tag != ASN1_EOC)) { + cFYI(1, + ("cls = %d con = %d tag = %d end = %p (%d) exit 0", + cls, con, tag, end, *end)); + return 0; + } - while (!asn1_eoc_decode(&ctx, sequence_end)) { - rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag); - if (!rc) { - cFYI(1, - ("Error decoding negTokenInit hdr exit2")); - return 0; - } - if ((tag == ASN1_OJI) && (con == ASN1_PRI)) { - if (asn1_oid_decode(&ctx, end, &oid, &oidlen)) { - - cFYI(1, - ("OID len = %d oid = 0x%lx 0x%lx " - "0x%lx 0x%lx", - oidlen, *oid, *(oid + 1), - *(oid + 2), *(oid + 3))); - - if (compare_oid(oid, oidlen, - MSKRB5_OID, - MSKRB5_OID_LEN)) - use_kerberos = true; - else if (compare_oid(oid, oidlen, - KRB5_OID, - KRB5_OID_LEN)) - use_kerberos = true; - else if (compare_oid(oid, oidlen, - NTLMSSP_OID, - NTLMSSP_OID_LEN)) - use_ntlmssp = true; - - kfree(oid); - } - } else { - cFYI(1, ("Should be an oid what is going on?")); - } - } + if (asn1_header_decode + (&ctx, &sequence_end, &cls, &con, &tag) == 0) { + cFYI(1, ("Error decoding 2nd part of negTokenInit")); + return 0; + } else if ((cls != ASN1_UNI) || (con != ASN1_CON) + || (tag != ASN1_SEQ)) { + cFYI(1, + ("cls = %d con = %d tag = %d end = %p (%d) exit 1", + cls, con, tag, end, *end)); + return 0; + } - if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { - cFYI(1, - ("Error decoding last part negTokenInit exit3")); - return 0; - } else if ((cls != ASN1_CTX) || (con != ASN1_CON)) { - /* tag = 3 indicating mechListMIC */ + while (!asn1_eoc_decode(&ctx, sequence_end)) { + rc = asn1_header_decode(&ctx, &end, &cls, &con, &tag); + if (!rc) { cFYI(1, - ("Exit 4 cls = %d con = %d tag = %d end = %p (%d)", - cls, con, tag, end, *end)); + ("Error decoding negTokenInit hdr exit2")); return 0; } - if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { - cFYI(1, - ("Error decoding last part negTokenInit exit5")); - return 0; - } else if ((cls != ASN1_UNI) || (con != ASN1_CON) - || (tag != ASN1_SEQ)) { - cFYI(1, ("cls = %d con = %d tag = %d end = %p (%d)", - cls, con, tag, end, *end)); + if ((tag == ASN1_OJI) && (con == ASN1_PRI)) { + if (asn1_oid_decode(&ctx, end, &oid, &oidlen)) { + + cFYI(1, ("OID len = %d oid = 0x%lx 0x%lx " + "0x%lx 0x%lx", oidlen, *oid, + *(oid + 1), *(oid + 2), *(oid + 3))); + + if (compare_oid(oid, oidlen, MSKRB5_OID, + MSKRB5_OID_LEN)) + use_kerberos = true; + else if (compare_oid(oid, oidlen, KRB5_OID, + KRB5_OID_LEN)) + use_kerberos = true; + else if (compare_oid(oid, oidlen, NTLMSSP_OID, + NTLMSSP_OID_LEN)) + use_ntlmssp = true; + + kfree(oid); + } + } else { + cFYI(1, ("Should be an oid what is going on?")); } + } - if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { - cFYI(1, - ("Error decoding last part negTokenInit exit 7")); - return 0; - } else if ((cls != ASN1_CTX) || (con != ASN1_CON)) { - cFYI(1, - ("Exit 8 cls = %d con = %d tag = %d end = %p (%d)", - cls, con, tag, end, *end)); - return 0; - } - if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { - cFYI(1, - ("Error decoding last part negTokenInit exit9")); - return 0; - } else if ((cls != ASN1_UNI) || (con != ASN1_PRI) - || (tag != ASN1_GENSTR)) { - cFYI(1, - ("Exit10 cls = %d con = %d tag = %d end = %p (%d)", - cls, con, tag, end, *end)); - return 0; - } - cFYI(1, ("Need to call asn1_octets_decode() function for %s", - ctx.pointer)); /* is this UTF-8 or ASCII? */ + if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { + cFYI(1, ("Error decoding last part negTokenInit exit3")); + return 0; + } else if ((cls != ASN1_CTX) || (con != ASN1_CON)) { + /* tag = 3 indicating mechListMIC */ + cFYI(1, ("Exit 4 cls = %d con = %d tag = %d end = %p (%d)", + cls, con, tag, end, *end)); + return 0; + } + if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { + cFYI(1, ("Error decoding last part negTokenInit exit5")); + return 0; + } else if ((cls != ASN1_UNI) || (con != ASN1_CON) + || (tag != ASN1_SEQ)) { + cFYI(1, ("cls = %d con = %d tag = %d end = %p (%d)", + cls, con, tag, end, *end)); + } + + if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { + cFYI(1, ("Error decoding last part negTokenInit exit 7")); + return 0; + } else if ((cls != ASN1_CTX) || (con != ASN1_CON)) { + cFYI(1, ("Exit 8 cls = %d con = %d tag = %d end = %p (%d)", + cls, con, tag, end, *end)); + return 0; + } + if (asn1_header_decode(&ctx, &end, &cls, &con, &tag) == 0) { + cFYI(1, ("Error decoding last part negTokenInit exit9")); + return 0; + } else if ((cls != ASN1_UNI) || (con != ASN1_PRI) + || (tag != ASN1_GENSTR)) { + cFYI(1, ("Exit10 cls = %d con = %d tag = %d end = %p (%d)", + cls, con, tag, end, *end)); + return 0; } + cFYI(1, ("Need to call asn1_octets_decode() function for %s", + ctx.pointer)); /* is this UTF-8 or ASCII? */ if (use_kerberos) *secType = Kerberos; diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h index 25a6cbd1552..135c965c413 100644 --- a/fs/cifs/cifsfs.h +++ b/fs/cifs/cifsfs.h @@ -101,5 +101,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg); extern const struct export_operations cifs_export_ops; #endif /* EXPERIMENTAL */ -#define CIFS_VERSION "1.53" +#define CIFS_VERSION "1.54" #endif /* _CIFSFS_H */ -- GitLab From 775a7229ac862ea93924672e7e331edf8475415c Mon Sep 17 00:00:00 2001 From: jkacur Date: Wed, 16 Jul 2008 00:31:16 +0200 Subject: [PATCH 0482/1024] Kconfig/init: change help text to match default value Change the "If unsure" message to match the default value. Signed-off-by: John Kacur Signed-off-by: Sam Ravnborg --- init/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/init/Kconfig b/init/Kconfig index 250e02c8f8f..7e6dae1ae72 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -522,7 +522,7 @@ config CC_OPTIMIZE_FOR_SIZE Enabling this option will pass "-Os" instead of "-O2" to gcc resulting in a smaller kernel. - If unsure, say N. + If unsure, say Y. config SYSCTL bool -- GitLab From 48a61569bb5396415c5dad0e81e1cfeb87c0aca3 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 23 Jul 2008 22:50:45 +0300 Subject: [PATCH 0483/1024] kbuild: scripts/ver_linux: don't set PATH It would have saved both a bug submitter and me a few hours if scripts/ver_linux had picked the same gcc as the build. Since I can't see any reason why it fiddles with PATH at all this patch therefore removes the PATH setting. Signed-off-by: Adrian Bunk Signed-off-by: Sam Ravnborg --- scripts/ver_linux | 1 - 1 file changed, 1 deletion(-) diff --git a/scripts/ver_linux b/scripts/ver_linux index 7ac0e309be0..dbb3037f134 100755 --- a/scripts/ver_linux +++ b/scripts/ver_linux @@ -4,7 +4,6 @@ # /bin /sbin /usr/bin /usr/sbin /usr/local/bin, but it may # differ on your system. # -PATH=/sbin:/usr/sbin:/bin:/usr/bin:/usr/local/sbin:$PATH echo 'If some fields are empty or look unusual you may have an old version.' echo 'Compare to the current minimal requirements in Documentation/Changes.' echo ' ' -- GitLab From dacdd0e04768da1fd2b24a6ee274c582b40d0c5b Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Thu, 17 Jul 2008 16:54:19 -0700 Subject: [PATCH 0484/1024] [PATCH] configfs: Include linux/err.h in linux/configfs.h We now use PTR_ERR() in the ->make_item() and ->make_group() operations. Folks including configfs.h need err.h. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/configfs/dir.c | 2 +- include/linux/configfs.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index 179589be063..2495f23e33f 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -1094,7 +1094,7 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) kfree(name); if (ret) { /* - * If item == NULL, then link_obj() was never called. + * If ret != 0, then link_obj() was never called. * There are no extra references to clean up. */ goto out_put; diff --git a/include/linux/configfs.h b/include/linux/configfs.h index d62c19ff041..0a5491baf0b 100644 --- a/include/linux/configfs.h +++ b/include/linux/configfs.h @@ -40,6 +40,7 @@ #include #include #include +#include #include -- GitLab From 4768e9b18dc63719209c68920d4ae52dc49b6161 Mon Sep 17 00:00:00 2001 From: Louis Rilling Date: Mon, 23 Jun 2008 14:16:17 +0200 Subject: [PATCH 0485/1024] [PATCH] configfs: Fix symlink() to a removing item The rule for configfs symlinks is that symlinks always point to valid config_items, and prevent the target from being removed. However, configfs_symlink() only checks that it can grab a reference on the target item, without ensuring that it remains alive until the symlink is correctly attached. This patch makes configfs_symlink() fail whenever the target is being removed, using the CONFIGFS_USET_DROPPING flag set by configfs_detach_prep() and protected by configfs_dirent_lock. This patch introduces a similar (weird?) behavior as with mkdir failures making rmdir fail: if symlink() races with rmdir() of the parent directory (or its youngest user-created ancestor if parent is a default group) or rmdir() of the target directory, and then fails in configfs_create(), this can make the racing rmdir() fail despite the concerned directory having no user-created entry (resp. no symlink pointing to it or one of its default groups) in the end. This behavior is fixed in later patches. Signed-off-by: Louis Rilling Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/configfs/dir.c | 14 +++++++------- fs/configfs/symlink.c | 6 ++++++ 2 files changed, 13 insertions(+), 7 deletions(-) diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index 2495f23e33f..cb5ea44846a 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -370,6 +370,9 @@ static int configfs_detach_prep(struct dentry *dentry, struct mutex **wait_mutex struct configfs_dirent *sd; int ret; + /* Mark that we're trying to drop the group */ + parent_sd->s_type |= CONFIGFS_USET_DROPPING; + ret = -EBUSY; if (!list_empty(&parent_sd->s_links)) goto out; @@ -385,8 +388,6 @@ static int configfs_detach_prep(struct dentry *dentry, struct mutex **wait_mutex *wait_mutex = &sd->s_dentry->d_inode->i_mutex; return -EAGAIN; } - /* Mark that we're trying to drop the group */ - sd->s_type |= CONFIGFS_USET_DROPPING; /* * Yup, recursive. If there's a problem, blame @@ -414,12 +415,11 @@ static void configfs_detach_rollback(struct dentry *dentry) struct configfs_dirent *parent_sd = dentry->d_fsdata; struct configfs_dirent *sd; - list_for_each_entry(sd, &parent_sd->s_children, s_sibling) { - if (sd->s_type & CONFIGFS_USET_DEFAULT) { + parent_sd->s_type &= ~CONFIGFS_USET_DROPPING; + + list_for_each_entry(sd, &parent_sd->s_children, s_sibling) + if (sd->s_type & CONFIGFS_USET_DEFAULT) configfs_detach_rollback(sd->s_dentry); - sd->s_type &= ~CONFIGFS_USET_DROPPING; - } - } } static void detach_attrs(struct config_item * item) diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c index 0004d18c40a..c12801a12c3 100644 --- a/fs/configfs/symlink.c +++ b/fs/configfs/symlink.c @@ -78,6 +78,12 @@ static int create_link(struct config_item *parent_item, if (sl) { sl->sl_target = config_item_get(item); spin_lock(&configfs_dirent_lock); + if (target_sd->s_type & CONFIGFS_USET_DROPPING) { + spin_unlock(&configfs_dirent_lock); + config_item_put(item); + kfree(sl); + return -ENOENT; + } list_add(&sl->sl_list, &target_sd->s_links); spin_unlock(&configfs_dirent_lock); ret = configfs_create_link(sl, parent_item->ci_dentry, -- GitLab From 9a73d78cda750f12e25eb811878f2d9dbab1bc6e Mon Sep 17 00:00:00 2001 From: Louis Rilling Date: Fri, 20 Jun 2008 14:09:22 +0200 Subject: [PATCH 0486/1024] [PATCH] configfs: Fix failing symlink() making rmdir() fail On a similar pattern as mkdir() vs rmdir(), a failing symlink() may make rmdir() fail for the symlink's parent and the symlink's target as well. failing symlink() making target's rmdir() fail: process 1: process 2: symlink("A/S" -> "B") allow_link() create_link() attach to "B" links list rmdir("B") detach_prep("B") error because of new link configfs_create_link("A", "S") error (eg -ENOMEM) failing symlink() making parent's rmdir() fail: process 1: process 2: symlink("A/D/S" -> "B") allow_link() create_link() attach to "B" links list configfs_create_link("A/D", "S") make_dirent("A/D", "S") rmdir("A") detach_prep("A") detach_prep("A/D") error because of "S" create("S") error (eg -ENOMEM) We cannot use the same solution as for mkdir() vs rmdir(), since rmdir() on the target cannot wait on the i_mutex of the new symlink's parent without risking a deadlock (with other symlink() or sys_rename()). Instead we define a global mutex protecting all configfs symlinks attachment, so that rmdir() can avoid the races above. Signed-off-by: Louis Rilling Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/configfs/configfs_internal.h | 1 + fs/configfs/dir.c | 10 ++++++++++ fs/configfs/symlink.c | 5 +++++ 3 files changed, 16 insertions(+) diff --git a/fs/configfs/configfs_internal.h b/fs/configfs/configfs_internal.h index da015c12e3e..5f61b26eba9 100644 --- a/fs/configfs/configfs_internal.h +++ b/fs/configfs/configfs_internal.h @@ -51,6 +51,7 @@ struct configfs_dirent { #define CONFIGFS_USET_IN_MKDIR 0x0200 #define CONFIGFS_NOT_PINNED (CONFIGFS_ITEM_ATTR) +extern struct mutex configfs_symlink_mutex; extern spinlock_t configfs_dirent_lock; extern struct vfsmount * configfs_mount; diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index cb5ea44846a..4e228c80fe9 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -1207,6 +1207,11 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry) return -EINVAL; } + /* + * Ensure that no racing symlink() will make detach_prep() fail while + * the new link is temporarily attached + */ + mutex_lock(&configfs_symlink_mutex); spin_lock(&configfs_dirent_lock); do { struct mutex *wait_mutex; @@ -1215,6 +1220,7 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry) if (ret) { configfs_detach_rollback(dentry); spin_unlock(&configfs_dirent_lock); + mutex_unlock(&configfs_symlink_mutex); if (ret != -EAGAIN) { config_item_put(parent_item); return ret; @@ -1224,10 +1230,12 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry) mutex_lock(wait_mutex); mutex_unlock(wait_mutex); + mutex_lock(&configfs_symlink_mutex); spin_lock(&configfs_dirent_lock); } } while (ret == -EAGAIN); spin_unlock(&configfs_dirent_lock); + mutex_unlock(&configfs_symlink_mutex); /* Get a working ref for the duration of this function */ item = configfs_get_config_item(dentry); @@ -1517,11 +1525,13 @@ void configfs_unregister_subsystem(struct configfs_subsystem *subsys) mutex_lock_nested(&configfs_sb->s_root->d_inode->i_mutex, I_MUTEX_PARENT); mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD); + mutex_lock(&configfs_symlink_mutex); spin_lock(&configfs_dirent_lock); if (configfs_detach_prep(dentry, NULL)) { printk(KERN_ERR "configfs: Tried to unregister non-empty subsystem!\n"); } spin_unlock(&configfs_dirent_lock); + mutex_unlock(&configfs_symlink_mutex); configfs_detach_group(&group->cg_item); dentry->d_inode->i_flags |= S_DEAD; mutex_unlock(&dentry->d_inode->i_mutex); diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c index c12801a12c3..61a886dbd60 100644 --- a/fs/configfs/symlink.c +++ b/fs/configfs/symlink.c @@ -31,6 +31,9 @@ #include #include "configfs_internal.h" +/* Protects attachments of new symlinks */ +DEFINE_MUTEX(configfs_symlink_mutex); + static int item_depth(struct config_item * item) { struct config_item * p = item; @@ -147,7 +150,9 @@ int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symna ret = type->ct_item_ops->allow_link(parent_item, target_item); if (!ret) { + mutex_lock(&configfs_symlink_mutex); ret = create_link(parent_item, target_item, dentry); + mutex_unlock(&configfs_symlink_mutex); if (ret && type->ct_item_ops->drop_link) type->ct_item_ops->drop_link(parent_item, target_item); -- GitLab From 2a109f2a4155f168047aa2f5b3a170e279bef89a Mon Sep 17 00:00:00 2001 From: Louis Rilling Date: Fri, 4 Jul 2008 16:56:05 +0200 Subject: [PATCH 0487/1024] [PATCH] configfs: Prevent userspace from creating new entries under attaching directories process 1: process 2: configfs_mkdir("A") attach_group("A") attach_item("A") d_instantiate("A") populate_groups("A") mutex_lock("A") attach_group("A/B") attach_item("A") d_instantiate("A/B") mkdir("A/B/C") do_path_lookup("A/B/C", LOOKUP_PARENT) ok lookup_create("A/B/C") mutex_lock("A/B") ok configfs_mkdir("A/B/C") ok attach_group("A/C") attach_item("A/C") d_instantiate("A/C") populate_groups("A/C") mutex_lock("A/C") attach_group("A/C/D") attach_item("A/C/D") failure mutex_unlock("A/C") detach_groups("A/C") nothing to do mkdir("A/C/E") do_path_lookup("A/C/E", LOOKUP_PARENT) ok lookup_create("A/C/E") mutex_lock("A/C") ok configfs_mkdir("A/C/E") ok detach_item("A/C") d_delete("A/C") mutex_unlock("A") detach_groups("A") mutex_lock("A/B") detach_group("A/B") detach_groups("A/B") nothing since no _default_ group detach_item("A/B") mutex_unlock("A/B") d_delete("A/B") detach_item("A") d_delete("A") Two bugs: 1/ "A/B/C" and "A/C/E" are created, but never removed while their parent are removed in the end. The same could happen with symlink() instead of mkdir(). 2/ "A" and "A/C" inodes are not locked while detach_item() is called on them, which may probably confuse VFS. This commit fixes 1/, tagging new directories with CONFIGFS_USET_CREATING before building the inode and instantiating the dentry, and validating the whole group+default groups hierarchy in a second pass by clearing CONFIGFS_USET_CREATING. mkdir(), symlink(), lookup(), and dir_open() simply return -ENOENT if called in (or linking to) a directory tagged with CONFIGFS_USET_CREATING. This does not prevent userspace from calling stat() successfuly on such directories, but this prevents userspace from adding (children to | symlinking from/to | read/write attributes of | listing the contents of) not validated items. In other words, userspace will not interact with the subsystem on a new item until the new item creation completes correctly. It was first proposed to re-use CONFIGFS_USET_IN_MKDIR instead of a new flag CONFIGFS_USET_CREATING, but this generated conflicts when checking the target of a new symlink: a valid target directory in the middle of attaching a new user-created child item could be wrongly detected as being attached. 2/ is fixed by next commit. Signed-off-by: Louis Rilling Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/configfs/configfs_internal.h | 2 + fs/configfs/dir.c | 91 +++++++++++++++++++++++++++++++-- fs/configfs/symlink.c | 15 ++++++ 3 files changed, 103 insertions(+), 5 deletions(-) diff --git a/fs/configfs/configfs_internal.h b/fs/configfs/configfs_internal.h index 5f61b26eba9..762d287123c 100644 --- a/fs/configfs/configfs_internal.h +++ b/fs/configfs/configfs_internal.h @@ -49,6 +49,7 @@ struct configfs_dirent { #define CONFIGFS_USET_DEFAULT 0x0080 #define CONFIGFS_USET_DROPPING 0x0100 #define CONFIGFS_USET_IN_MKDIR 0x0200 +#define CONFIGFS_USET_CREATING 0x0400 #define CONFIGFS_NOT_PINNED (CONFIGFS_ITEM_ATTR) extern struct mutex configfs_symlink_mutex; @@ -67,6 +68,7 @@ extern void configfs_inode_exit(void); extern int configfs_create_file(struct config_item *, const struct configfs_attribute *); extern int configfs_make_dirent(struct configfs_dirent *, struct dentry *, void *, umode_t, int); +extern int configfs_dirent_is_ready(struct configfs_dirent *); extern int configfs_add_file(struct dentry *, const struct configfs_attribute *, int); extern void configfs_hash_and_remove(struct dentry * dir, const char * name); diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index 4e228c80fe9..647499a3479 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -185,7 +185,7 @@ static int create_dir(struct config_item * k, struct dentry * p, error = configfs_dirent_exists(p->d_fsdata, d->d_name.name); if (!error) error = configfs_make_dirent(p->d_fsdata, d, k, mode, - CONFIGFS_DIR); + CONFIGFS_DIR | CONFIGFS_USET_CREATING); if (!error) { error = configfs_create(d, mode, init_dir); if (!error) { @@ -209,6 +209,9 @@ static int create_dir(struct config_item * k, struct dentry * p, * configfs_create_dir - create a directory for an config_item. * @item: config_itemwe're creating directory for. * @dentry: config_item's dentry. + * + * Note: user-created entries won't be allowed under this new directory + * until it is validated by configfs_dir_set_ready() */ static int configfs_create_dir(struct config_item * item, struct dentry *dentry) @@ -231,6 +234,44 @@ static int configfs_create_dir(struct config_item * item, struct dentry *dentry) return error; } +/* + * Allow userspace to create new entries under a new directory created with + * configfs_create_dir(), and under all of its chidlren directories recursively. + * @sd configfs_dirent of the new directory to validate + * + * Caller must hold configfs_dirent_lock. + */ +static void configfs_dir_set_ready(struct configfs_dirent *sd) +{ + struct configfs_dirent *child_sd; + + sd->s_type &= ~CONFIGFS_USET_CREATING; + list_for_each_entry(child_sd, &sd->s_children, s_sibling) + if (child_sd->s_type & CONFIGFS_USET_CREATING) + configfs_dir_set_ready(child_sd); +} + +/* + * Check that a directory does not belong to a directory hierarchy being + * attached and not validated yet. + * @sd configfs_dirent of the directory to check + * + * @return non-zero iff the directory was validated + * + * Note: takes configfs_dirent_lock, so the result may change from false to true + * in two consecutive calls, but never from true to false. + */ +int configfs_dirent_is_ready(struct configfs_dirent *sd) +{ + int ret; + + spin_lock(&configfs_dirent_lock); + ret = !(sd->s_type & CONFIGFS_USET_CREATING); + spin_unlock(&configfs_dirent_lock); + + return ret; +} + int configfs_create_link(struct configfs_symlink *sl, struct dentry *parent, struct dentry *dentry) @@ -330,7 +371,19 @@ static struct dentry * configfs_lookup(struct inode *dir, struct configfs_dirent * parent_sd = dentry->d_parent->d_fsdata; struct configfs_dirent * sd; int found = 0; - int err = 0; + int err; + + /* + * Fake invisibility if dir belongs to a group/default groups hierarchy + * being attached + * + * This forbids userspace to read/write attributes of items which may + * not complete their initialization, since the dentries of the + * attributes won't be instantiated. + */ + err = -ENOENT; + if (!configfs_dirent_is_ready(parent_sd)) + goto out; list_for_each_entry(sd, &parent_sd->s_children, s_sibling) { if (sd->s_type & CONFIGFS_NOT_PINNED) { @@ -353,6 +406,7 @@ static struct dentry * configfs_lookup(struct inode *dir, return simple_lookup(dir, dentry, nd); } +out: return ERR_PTR(err); } @@ -1044,6 +1098,16 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) } sd = dentry->d_parent->d_fsdata; + + /* + * Fake invisibility if dir belongs to a group/default groups hierarchy + * being attached + */ + if (!configfs_dirent_is_ready(sd)) { + ret = -ENOENT; + goto out; + } + if (!(sd->s_type & CONFIGFS_USET_DIR)) { ret = -EPERM; goto out; @@ -1142,6 +1206,8 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) spin_lock(&configfs_dirent_lock); sd->s_type &= ~CONFIGFS_USET_IN_MKDIR; + if (!ret) + configfs_dir_set_ready(dentry->d_fsdata); spin_unlock(&configfs_dirent_lock); out_unlink: @@ -1322,13 +1388,24 @@ static int configfs_dir_open(struct inode *inode, struct file *file) { struct dentry * dentry = file->f_path.dentry; struct configfs_dirent * parent_sd = dentry->d_fsdata; + int err; mutex_lock(&dentry->d_inode->i_mutex); - file->private_data = configfs_new_dirent(parent_sd, NULL); + /* + * Fake invisibility if dir belongs to a group/default groups hierarchy + * being attached + */ + err = -ENOENT; + if (configfs_dirent_is_ready(parent_sd)) { + file->private_data = configfs_new_dirent(parent_sd, NULL); + if (IS_ERR(file->private_data)) + err = PTR_ERR(file->private_data); + else + err = 0; + } mutex_unlock(&dentry->d_inode->i_mutex); - return IS_ERR(file->private_data) ? PTR_ERR(file->private_data) : 0; - + return err; } static int configfs_dir_close(struct inode *inode, struct file *file) @@ -1499,6 +1576,10 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys) if (err) { d_delete(dentry); dput(dentry); + } else { + spin_lock(&configfs_dirent_lock); + configfs_dir_set_ready(dentry->d_fsdata); + spin_unlock(&configfs_dirent_lock); } } diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c index 61a886dbd60..bf74973b049 100644 --- a/fs/configfs/symlink.c +++ b/fs/configfs/symlink.c @@ -76,6 +76,9 @@ static int create_link(struct config_item *parent_item, struct configfs_symlink *sl; int ret; + ret = -ENOENT; + if (!configfs_dirent_is_ready(target_sd)) + goto out; ret = -ENOMEM; sl = kmalloc(sizeof(struct configfs_symlink), GFP_KERNEL); if (sl) { @@ -100,6 +103,7 @@ static int create_link(struct config_item *parent_item, } } +out: return ret; } @@ -129,6 +133,7 @@ int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symna { int ret; struct nameidata nd; + struct configfs_dirent *sd; struct config_item *parent_item; struct config_item *target_item; struct config_item_type *type; @@ -137,9 +142,19 @@ int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symna if (dentry->d_parent == configfs_sb->s_root) goto out; + sd = dentry->d_parent->d_fsdata; + /* + * Fake invisibility if dir belongs to a group/default groups hierarchy + * being attached + */ + ret = -ENOENT; + if (!configfs_dirent_is_ready(sd)) + goto out; + parent_item = configfs_get_config_item(dentry->d_parent); type = parent_item->ci_type; + ret = -EPERM; if (!type || !type->ct_item_ops || !type->ct_item_ops->allow_link) goto out_put; -- GitLab From 2e2ce171c3ba6f2753fb1fd2706b63683394da2d Mon Sep 17 00:00:00 2001 From: Louis Rilling Date: Fri, 4 Jul 2008 16:56:06 +0200 Subject: [PATCH 0488/1024] [PATCH] configfs: Lock new directory inodes before removing on cleanup after failure Once a new configfs directory is created by configfs_attach_item() or configfs_attach_group(), a failure in the remaining initialization steps leads to removing a directory which inode the VFS may have already accessed. This commit adds the necessary inode locking to safely remove configfs directories while cleaning up after a failure. As an advantage, the locking rules of populate_groups() and detach_groups() become the same: the caller must have the group's inode mutex locked. Signed-off-by: Louis Rilling Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/configfs/dir.c | 48 ++++++++++++++++++++++++++++------------------- 1 file changed, 29 insertions(+), 19 deletions(-) diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index 647499a3479..4d11479cf2c 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -324,6 +324,8 @@ static void remove_dir(struct dentry * d) * The only thing special about this is that we remove any files in * the directory before we remove the directory, and we've inlined * what used to be configfs_rmdir() below, instead of calling separately. + * + * Caller holds the mutex of the item's inode */ static void configfs_remove_dir(struct config_item * item) @@ -612,36 +614,21 @@ static int create_default_group(struct config_group *parent_group, static int populate_groups(struct config_group *group) { struct config_group *new_group; - struct dentry *dentry = group->cg_item.ci_dentry; int ret = 0; int i; if (group->default_groups) { - /* - * FYI, we're faking mkdir here - * I'm not sure we need this semaphore, as we're called - * from our parent's mkdir. That holds our parent's - * i_mutex, so afaik lookup cannot continue through our - * parent to find us, let alone mess with our tree. - * That said, taking our i_mutex is closer to mkdir - * emulation, and shouldn't hurt. - */ - mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD); - for (i = 0; group->default_groups[i]; i++) { new_group = group->default_groups[i]; ret = create_default_group(group, new_group); - if (ret) + if (ret) { + detach_groups(group); break; + } } - - mutex_unlock(&dentry->d_inode->i_mutex); } - if (ret) - detach_groups(group); - return ret; } @@ -756,7 +743,15 @@ static int configfs_attach_item(struct config_item *parent_item, if (!ret) { ret = populate_attrs(item); if (ret) { + /* + * We are going to remove an inode and its dentry but + * the VFS may already have hit and used them. Thus, + * we must lock them as rmdir() would. + */ + mutex_lock(&dentry->d_inode->i_mutex); configfs_remove_dir(item); + dentry->d_inode->i_flags |= S_DEAD; + mutex_unlock(&dentry->d_inode->i_mutex); d_delete(dentry); } } @@ -764,6 +759,7 @@ static int configfs_attach_item(struct config_item *parent_item, return ret; } +/* Caller holds the mutex of the item's inode */ static void configfs_detach_item(struct config_item *item) { detach_attrs(item); @@ -782,16 +778,30 @@ static int configfs_attach_group(struct config_item *parent_item, sd = dentry->d_fsdata; sd->s_type |= CONFIGFS_USET_DIR; + /* + * FYI, we're faking mkdir in populate_groups() + * We must lock the group's inode to avoid races with the VFS + * which can already hit the inode and try to add/remove entries + * under it. + * + * We must also lock the inode to remove it safely in case of + * error, as rmdir() would. + */ + mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD); ret = populate_groups(to_config_group(item)); if (ret) { configfs_detach_item(item); - d_delete(dentry); + dentry->d_inode->i_flags |= S_DEAD; } + mutex_unlock(&dentry->d_inode->i_mutex); + if (ret) + d_delete(dentry); } return ret; } +/* Caller holds the mutex of the group's inode */ static void configfs_detach_group(struct config_item *item) { detach_groups(to_config_group(item)); -- GitLab From 99cefda42ac550863b5ae1df9e60322e377decf9 Mon Sep 17 00:00:00 2001 From: Louis Rilling Date: Fri, 27 Jun 2008 13:10:25 +0200 Subject: [PATCH 0489/1024] [PATCH] configfs: Fix open directory making rmdir() fail When checking for user-created elements under an item to be removed by rmdir(), configfs_detach_prep() counts fake configfs_dirents created by dir_open() as user-created and fails when finding one. It is however perfectly valid to remove a directory that is open. Simply make configfs_detach_prep() skip fake configfs_dirent, like it already does for attributes, and like detach_groups() does. Signed-off-by: Louis Rilling Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/configfs/dir.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index 4d11479cf2c..a89058b3988 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -435,7 +435,8 @@ static int configfs_detach_prep(struct dentry *dentry, struct mutex **wait_mutex ret = 0; list_for_each_entry(sd, &parent_sd->s_children, s_sibling) { - if (sd->s_type & CONFIGFS_NOT_PINNED) + if (!sd->s_element || + (sd->s_type & CONFIGFS_NOT_PINNED)) continue; if (sd->s_type & CONFIGFS_USET_DEFAULT) { /* Abort if racing with mkdir() */ -- GitLab From 70526b67443a980d5029d9cf06903bef731a4e96 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Tue, 17 Jun 2008 15:34:32 -0700 Subject: [PATCH 0490/1024] [PATCH] configfs: Pin configfs subsystems separately from new config_items. configfs_mkdir() creates a new item by calling its parent's ->make_item/group() functions. Once that object is created, configfs_mkdir() calls try_module_get() on the new item's module. If it succeeds, the module owning the new item cannot be unloaded, and configfs is safe to reference the item. If the item and the subsystem it belongs to are part of the same module, the subsystem is also pinned. This is the common case. However, if the subsystem is made up of multiple modules, this may not pin the subsystem. Thus, it would be possible to unload the toplevel subsystem module while there is still a child item. Thus, we now try_module_get() the subsystem's module. This only really affects children of the toplevel subsystem group. Deeper children already have their parents pinned. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- fs/configfs/dir.c | 42 +++++++++++++++++++++++++++++++++--------- 1 file changed, 33 insertions(+), 9 deletions(-) diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index a89058b3988..7a8db78a91d 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -1100,7 +1100,7 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) struct configfs_subsystem *subsys; struct configfs_dirent *sd; struct config_item_type *type; - struct module *owner = NULL; + struct module *subsys_owner = NULL, *new_item_owner = NULL; char *name; if (dentry->d_parent == configfs_sb->s_root) { @@ -1137,10 +1137,25 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) goto out_put; } + /* + * The subsystem may belong to a different module than the item + * being created. We don't want to safely pin the new item but + * fail to pin the subsystem it sits under. + */ + if (!subsys->su_group.cg_item.ci_type) { + ret = -EINVAL; + goto out_put; + } + subsys_owner = subsys->su_group.cg_item.ci_type->ct_owner; + if (!try_module_get(subsys_owner)) { + ret = -EINVAL; + goto out_put; + } + name = kmalloc(dentry->d_name.len + 1, GFP_KERNEL); if (!name) { ret = -ENOMEM; - goto out_put; + goto out_subsys_put; } snprintf(name, dentry->d_name.len + 1, "%s", dentry->d_name.name); @@ -1172,7 +1187,7 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) * If ret != 0, then link_obj() was never called. * There are no extra references to clean up. */ - goto out_put; + goto out_subsys_put; } /* @@ -1186,8 +1201,8 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) goto out_unlink; } - owner = type->ct_owner; - if (!try_module_get(owner)) { + new_item_owner = type->ct_owner; + if (!try_module_get(new_item_owner)) { ret = -EINVAL; goto out_unlink; } @@ -1236,9 +1251,13 @@ out_unlink: mutex_unlock(&subsys->su_mutex); if (module_got) - module_put(owner); + module_put(new_item_owner); } +out_subsys_put: + if (ret) + module_put(subsys_owner); + out_put: /* * link_obj()/link_group() took a reference from child->parent, @@ -1257,7 +1276,7 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry) struct config_item *item; struct configfs_subsystem *subsys; struct configfs_dirent *sd; - struct module *owner = NULL; + struct module *subsys_owner = NULL, *dead_item_owner = NULL; int ret; if (dentry->d_parent == configfs_sb->s_root) @@ -1284,6 +1303,10 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry) return -EINVAL; } + /* configfs_mkdir() shouldn't have allowed this */ + BUG_ON(!subsys->su_group.cg_item.ci_type); + subsys_owner = subsys->su_group.cg_item.ci_type->ct_owner; + /* * Ensure that no racing symlink() will make detach_prep() fail while * the new link is temporarily attached @@ -1321,7 +1344,7 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry) config_item_put(parent_item); if (item->ci_type) - owner = item->ci_type->ct_owner; + dead_item_owner = item->ci_type->ct_owner; if (sd->s_type & CONFIGFS_USET_DIR) { configfs_detach_group(item); @@ -1343,7 +1366,8 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry) /* Drop our reference from above */ config_item_put(item); - module_put(owner); + module_put(dead_item_owner); + module_put(subsys_owner); return 0; } -- GitLab From ecb3d28c7edd58b54f16838c434b342ba9195bec Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Wed, 18 Jun 2008 19:29:05 -0700 Subject: [PATCH 0491/1024] [PATCH] configfs: Convenience macros for attribute definition. Sysfs has the _ATTR() and _ATTR_RO() macros to make defining extended form attributes easier. configfs should have something similiar. - _CONFIGFS_ATTR() and _CONFIGFS_ATTR_RO() are the counterparts to the sysfs macros. - CONFIGFS_ATTR_STRUCT() creates the extended form attribute structure. - CONFIGFS_ATTR_OPS() defines the show_attribute()/store_attribute() operations that call the show()/store() operations of the extended form configfs_attributes. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh --- .../filesystems/configfs/configfs.txt | 17 +- ..._example.c => configfs_example_explicit.c} | 18 +- .../configfs/configfs_example_macros.c | 448 ++++++++++++++++++ include/linux/configfs.h | 67 ++- 4 files changed, 536 insertions(+), 14 deletions(-) rename Documentation/filesystems/configfs/{configfs_example.c => configfs_example_explicit.c} (96%) create mode 100644 Documentation/filesystems/configfs/configfs_example_macros.c diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt index 44c97e6accb..fabcb0e00f2 100644 --- a/Documentation/filesystems/configfs/configfs.txt +++ b/Documentation/filesystems/configfs/configfs.txt @@ -311,9 +311,20 @@ the subsystem must be ready for it. [An Example] The best example of these basic concepts is the simple_children -subsystem/group and the simple_child item in configfs_example.c It -shows a trivial object displaying and storing an attribute, and a simple -group creating and destroying these children. +subsystem/group and the simple_child item in configfs_example_explicit.c +and configfs_example_macros.c. It shows a trivial object displaying and +storing an attribute, and a simple group creating and destroying these +children. + +The only difference between configfs_example_explicit.c and +configfs_example_macros.c is how the attributes of the childless item +are defined. The childless item has extended attributes, each with +their own show()/store() operation. This follows a convention commonly +used in sysfs. configfs_example_explicit.c creates these attributes +by explicitly defining the structures involved. Conversely +configfs_example_macros.c uses some convenience macros from configfs.h +to define the attributes. These macros are similar to their sysfs +counterparts. [Hierarchy Navigation and the Subsystem Mutex] diff --git a/Documentation/filesystems/configfs/configfs_example.c b/Documentation/filesystems/configfs/configfs_example_explicit.c similarity index 96% rename from Documentation/filesystems/configfs/configfs_example.c rename to Documentation/filesystems/configfs/configfs_example_explicit.c index 03964879170..d428cc9f07f 100644 --- a/Documentation/filesystems/configfs/configfs_example.c +++ b/Documentation/filesystems/configfs/configfs_example_explicit.c @@ -1,8 +1,10 @@ /* * vim: noexpandtab ts=8 sts=0 sw=8: * - * configfs_example.c - This file is a demonstration module containing - * a number of configfs subsystems. + * configfs_example_explicit.c - This file is a demonstration module + * containing a number of configfs subsystems. It explicitly defines + * each structure without using the helper macros defined in + * configfs.h. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public @@ -281,7 +283,6 @@ static struct config_item *simple_children_make_item(struct config_group *group, if (!simple_child) return ERR_PTR(-ENOMEM); - config_item_init_type_name(&simple_child->item, name, &simple_child_type); @@ -302,8 +303,8 @@ static struct configfs_attribute *simple_children_attrs[] = { }; static ssize_t simple_children_attr_show(struct config_item *item, - struct configfs_attribute *attr, - char *page) + struct configfs_attribute *attr, + char *page) { return sprintf(page, "[02-simple-children]\n" @@ -318,7 +319,7 @@ static void simple_children_release(struct config_item *item) } static struct configfs_item_operations simple_children_item_ops = { - .release = simple_children_release, + .release = simple_children_release, .show_attribute = simple_children_attr_show, }; @@ -368,7 +369,6 @@ static struct config_group *group_children_make_group(struct config_group *group if (!simple_children) return ERR_PTR(-ENOMEM); - config_group_init_type_name(&simple_children->group, name, &simple_children_type); @@ -387,8 +387,8 @@ static struct configfs_attribute *group_children_attrs[] = { }; static ssize_t group_children_attr_show(struct config_item *item, - struct configfs_attribute *attr, - char *page) + struct configfs_attribute *attr, + char *page) { return sprintf(page, "[03-group-children]\n" diff --git a/Documentation/filesystems/configfs/configfs_example_macros.c b/Documentation/filesystems/configfs/configfs_example_macros.c new file mode 100644 index 00000000000..d8e30a0378a --- /dev/null +++ b/Documentation/filesystems/configfs/configfs_example_macros.c @@ -0,0 +1,448 @@ +/* + * vim: noexpandtab ts=8 sts=0 sw=8: + * + * configfs_example_macros.c - This file is a demonstration module + * containing a number of configfs subsystems. It uses the helper + * macros defined by configfs.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + * + * Based on sysfs: + * sysfs is Copyright (C) 2001, 2002, 2003 Patrick Mochel + * + * configfs Copyright (C) 2005 Oracle. All rights reserved. + */ + +#include +#include +#include + +#include + + + +/* + * 01-childless + * + * This first example is a childless subsystem. It cannot create + * any config_items. It just has attributes. + * + * Note that we are enclosing the configfs_subsystem inside a container. + * This is not necessary if a subsystem has no attributes directly + * on the subsystem. See the next example, 02-simple-children, for + * such a subsystem. + */ + +struct childless { + struct configfs_subsystem subsys; + int showme; + int storeme; +}; + +static inline struct childless *to_childless(struct config_item *item) +{ + return item ? container_of(to_configfs_subsystem(to_config_group(item)), struct childless, subsys) : NULL; +} + +CONFIGFS_ATTR_STRUCT(childless); +#define CHILDLESS_ATTR(_name, _mode, _show, _store) \ +struct childless_attribute childless_attr_##_name = __CONFIGFS_ATTR(_name, _mode, _show, _store) +#define CHILDLESS_ATTR_RO(_name, _show) \ +struct childless_attribute childless_attr_##_name = __CONFIGFS_ATTR_RO(_name, _show); + +static ssize_t childless_showme_read(struct childless *childless, + char *page) +{ + ssize_t pos; + + pos = sprintf(page, "%d\n", childless->showme); + childless->showme++; + + return pos; +} + +static ssize_t childless_storeme_read(struct childless *childless, + char *page) +{ + return sprintf(page, "%d\n", childless->storeme); +} + +static ssize_t childless_storeme_write(struct childless *childless, + const char *page, + size_t count) +{ + unsigned long tmp; + char *p = (char *) page; + + tmp = simple_strtoul(p, &p, 10); + if (!p || (*p && (*p != '\n'))) + return -EINVAL; + + if (tmp > INT_MAX) + return -ERANGE; + + childless->storeme = tmp; + + return count; +} + +static ssize_t childless_description_read(struct childless *childless, + char *page) +{ + return sprintf(page, +"[01-childless]\n" +"\n" +"The childless subsystem is the simplest possible subsystem in\n" +"configfs. It does not support the creation of child config_items.\n" +"It only has a few attributes. In fact, it isn't much different\n" +"than a directory in /proc.\n"); +} + +CHILDLESS_ATTR_RO(showme, childless_showme_read); +CHILDLESS_ATTR(storeme, S_IRUGO | S_IWUSR, childless_storeme_read, + childless_storeme_write); +CHILDLESS_ATTR_RO(description, childless_description_read); + +static struct configfs_attribute *childless_attrs[] = { + &childless_attr_showme.attr, + &childless_attr_storeme.attr, + &childless_attr_description.attr, + NULL, +}; + +CONFIGFS_ATTR_OPS(childless); +static struct configfs_item_operations childless_item_ops = { + .show_attribute = childless_attr_show, + .store_attribute = childless_attr_store, +}; + +static struct config_item_type childless_type = { + .ct_item_ops = &childless_item_ops, + .ct_attrs = childless_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct childless childless_subsys = { + .subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "01-childless", + .ci_type = &childless_type, + }, + }, + }, +}; + + +/* ----------------------------------------------------------------- */ + +/* + * 02-simple-children + * + * This example merely has a simple one-attribute child. Note that + * there is no extra attribute structure, as the child's attribute is + * known from the get-go. Also, there is no container for the + * subsystem, as it has no attributes of its own. + */ + +struct simple_child { + struct config_item item; + int storeme; +}; + +static inline struct simple_child *to_simple_child(struct config_item *item) +{ + return item ? container_of(item, struct simple_child, item) : NULL; +} + +static struct configfs_attribute simple_child_attr_storeme = { + .ca_owner = THIS_MODULE, + .ca_name = "storeme", + .ca_mode = S_IRUGO | S_IWUSR, +}; + +static struct configfs_attribute *simple_child_attrs[] = { + &simple_child_attr_storeme, + NULL, +}; + +static ssize_t simple_child_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + ssize_t count; + struct simple_child *simple_child = to_simple_child(item); + + count = sprintf(page, "%d\n", simple_child->storeme); + + return count; +} + +static ssize_t simple_child_attr_store(struct config_item *item, + struct configfs_attribute *attr, + const char *page, size_t count) +{ + struct simple_child *simple_child = to_simple_child(item); + unsigned long tmp; + char *p = (char *) page; + + tmp = simple_strtoul(p, &p, 10); + if (!p || (*p && (*p != '\n'))) + return -EINVAL; + + if (tmp > INT_MAX) + return -ERANGE; + + simple_child->storeme = tmp; + + return count; +} + +static void simple_child_release(struct config_item *item) +{ + kfree(to_simple_child(item)); +} + +static struct configfs_item_operations simple_child_item_ops = { + .release = simple_child_release, + .show_attribute = simple_child_attr_show, + .store_attribute = simple_child_attr_store, +}; + +static struct config_item_type simple_child_type = { + .ct_item_ops = &simple_child_item_ops, + .ct_attrs = simple_child_attrs, + .ct_owner = THIS_MODULE, +}; + + +struct simple_children { + struct config_group group; +}; + +static inline struct simple_children *to_simple_children(struct config_item *item) +{ + return item ? container_of(to_config_group(item), struct simple_children, group) : NULL; +} + +static struct config_item *simple_children_make_item(struct config_group *group, const char *name) +{ + struct simple_child *simple_child; + + simple_child = kzalloc(sizeof(struct simple_child), GFP_KERNEL); + if (!simple_child) + return ERR_PTR(-ENOMEM); + + config_item_init_type_name(&simple_child->item, name, + &simple_child_type); + + simple_child->storeme = 0; + + return &simple_child->item; +} + +static struct configfs_attribute simple_children_attr_description = { + .ca_owner = THIS_MODULE, + .ca_name = "description", + .ca_mode = S_IRUGO, +}; + +static struct configfs_attribute *simple_children_attrs[] = { + &simple_children_attr_description, + NULL, +}; + +static ssize_t simple_children_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + return sprintf(page, +"[02-simple-children]\n" +"\n" +"This subsystem allows the creation of child config_items. These\n" +"items have only one attribute that is readable and writeable.\n"); +} + +static void simple_children_release(struct config_item *item) +{ + kfree(to_simple_children(item)); +} + +static struct configfs_item_operations simple_children_item_ops = { + .release = simple_children_release, + .show_attribute = simple_children_attr_show, +}; + +/* + * Note that, since no extra work is required on ->drop_item(), + * no ->drop_item() is provided. + */ +static struct configfs_group_operations simple_children_group_ops = { + .make_item = simple_children_make_item, +}; + +static struct config_item_type simple_children_type = { + .ct_item_ops = &simple_children_item_ops, + .ct_group_ops = &simple_children_group_ops, + .ct_attrs = simple_children_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_subsystem simple_children_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "02-simple-children", + .ci_type = &simple_children_type, + }, + }, +}; + + +/* ----------------------------------------------------------------- */ + +/* + * 03-group-children + * + * This example reuses the simple_children group from above. However, + * the simple_children group is not the subsystem itself, it is a + * child of the subsystem. Creation of a group in the subsystem creates + * a new simple_children group. That group can then have simple_child + * children of its own. + */ + +static struct config_group *group_children_make_group(struct config_group *group, const char *name) +{ + struct simple_children *simple_children; + + simple_children = kzalloc(sizeof(struct simple_children), + GFP_KERNEL); + if (!simple_children) + return ERR_PTR(-ENOMEM); + + config_group_init_type_name(&simple_children->group, name, + &simple_children_type); + + return &simple_children->group; +} + +static struct configfs_attribute group_children_attr_description = { + .ca_owner = THIS_MODULE, + .ca_name = "description", + .ca_mode = S_IRUGO, +}; + +static struct configfs_attribute *group_children_attrs[] = { + &group_children_attr_description, + NULL, +}; + +static ssize_t group_children_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + return sprintf(page, +"[03-group-children]\n" +"\n" +"This subsystem allows the creation of child config_groups. These\n" +"groups are like the subsystem simple-children.\n"); +} + +static struct configfs_item_operations group_children_item_ops = { + .show_attribute = group_children_attr_show, +}; + +/* + * Note that, since no extra work is required on ->drop_item(), + * no ->drop_item() is provided. + */ +static struct configfs_group_operations group_children_group_ops = { + .make_group = group_children_make_group, +}; + +static struct config_item_type group_children_type = { + .ct_item_ops = &group_children_item_ops, + .ct_group_ops = &group_children_group_ops, + .ct_attrs = group_children_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_subsystem group_children_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "03-group-children", + .ci_type = &group_children_type, + }, + }, +}; + +/* ----------------------------------------------------------------- */ + +/* + * We're now done with our subsystem definitions. + * For convenience in this module, here's a list of them all. It + * allows the init function to easily register them. Most modules + * will only have one subsystem, and will only call register_subsystem + * on it directly. + */ +static struct configfs_subsystem *example_subsys[] = { + &childless_subsys.subsys, + &simple_children_subsys, + &group_children_subsys, + NULL, +}; + +static int __init configfs_example_init(void) +{ + int ret; + int i; + struct configfs_subsystem *subsys; + + for (i = 0; example_subsys[i]; i++) { + subsys = example_subsys[i]; + + config_group_init(&subsys->su_group); + mutex_init(&subsys->su_mutex); + ret = configfs_register_subsystem(subsys); + if (ret) { + printk(KERN_ERR "Error %d while registering subsystem %s\n", + ret, + subsys->su_group.cg_item.ci_namebuf); + goto out_unregister; + } + } + + return 0; + +out_unregister: + for (; i >= 0; i--) { + configfs_unregister_subsystem(example_subsys[i]); + } + + return ret; +} + +static void __exit configfs_example_exit(void) +{ + int i; + + for (i = 0; example_subsys[i]; i++) { + configfs_unregister_subsystem(example_subsys[i]); + } +} + +module_init(configfs_example_init); +module_exit(configfs_example_exit); +MODULE_LICENSE("GPL"); diff --git a/include/linux/configfs.h b/include/linux/configfs.h index 0a5491baf0b..7f627775c94 100644 --- a/include/linux/configfs.h +++ b/include/linux/configfs.h @@ -130,8 +130,25 @@ struct configfs_attribute { /* * Users often need to create attribute structures for their configurable * attributes, containing a configfs_attribute member and function pointers - * for the show() and store() operations on that attribute. They can use - * this macro (similar to sysfs' __ATTR) to make defining attributes easier. + * for the show() and store() operations on that attribute. If they don't + * need anything else on the extended attribute structure, they can use + * this macro to define it The argument _item is the name of the + * config_item structure. + */ +#define CONFIGFS_ATTR_STRUCT(_item) \ +struct _item##_attribute { \ + struct configfs_attribute attr; \ + ssize_t (*show)(struct _item *, char *); \ + ssize_t (*store)(struct _item *, const char *, size_t); \ +} + +/* + * With the extended attribute structure, users can use this macro + * (similar to sysfs' __ATTR) to make defining attributes easier. + * An example: + * #define MYITEM_ATTR(_name, _mode, _show, _store) \ + * struct myitem_attribute childless_attr_##_name = \ + * __CONFIGFS_ATTR(_name, _mode, _show, _store) */ #define __CONFIGFS_ATTR(_name, _mode, _show, _store) \ { \ @@ -143,6 +160,52 @@ struct configfs_attribute { .show = _show, \ .store = _store, \ } +/* Here is a readonly version, only requiring a show() operation */ +#define __CONFIGFS_ATTR_RO(_name, _show) \ +{ \ + .attr = { \ + .ca_name = __stringify(_name), \ + .ca_mode = 0444, \ + .ca_owner = THIS_MODULE, \ + }, \ + .show = _show, \ +} + +/* + * With these extended attributes, the simple show_attribute() and + * store_attribute() operations need to call the show() and store() of the + * attributes. This is a common pattern, so we provide a macro to define + * them. The argument _item is the name of the config_item structure. + * This macro expects the attributes to be named "struct _attribute" + * and the function to_() to exist; + */ +#define CONFIGFS_ATTR_OPS(_item) \ +static ssize_t _item##_attr_show(struct config_item *item, \ + struct configfs_attribute *attr, \ + char *page) \ +{ \ + struct _item *_item = to_##_item(item); \ + struct _item##_attribute *_item##_attr = \ + container_of(attr, struct _item##_attribute, attr); \ + ssize_t ret = 0; \ + \ + if (_item##_attr->show) \ + ret = _item##_attr->show(_item, page); \ + return ret; \ +} \ +static ssize_t _item##_attr_store(struct config_item *item, \ + struct configfs_attribute *attr, \ + const char *page, size_t count) \ +{ \ + struct _item *_item = to_##_item(item); \ + struct _item##_attribute *_item##_attr = \ + container_of(attr, struct _item##_attribute, attr); \ + ssize_t ret = -EINVAL; \ + \ + if (_item##_attr->store) \ + ret = _item##_attr->store(_item, page, count); \ + return ret; \ +} /* * If allow_link() exists, the item can symlink(2) out to other -- GitLab From c69991aac71a8beb57c11d651c7fd4b24c32aa8b Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 14 Jul 2008 17:31:09 -0700 Subject: [PATCH 0492/1024] [PATCH 1/2] ocfs2: Add counter in struct ocfs2_dinode to track journal replays This patch renames the ij_pad to ij_recovery_generation in struct ocfs2_dinode. This will be used to keep count of journal replays after an unclean shutdown. Signed-off-by: Sunil Mushran Signed-off-by: Mark Fasheh --- fs/ocfs2/ocfs2_fs.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index 3f194517762..4f619850ccf 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -660,7 +660,10 @@ struct ocfs2_dinode { struct { /* Info for journal system inodes */ __le32 ij_flags; /* Mounted, version, etc. */ - __le32 ij_pad; + __le32 ij_recovery_generation; /* Incremented when the + journal is recovered + after an unclean + shutdown */ } journal1; } id1; /* Inode type dependant 1 */ /*C0*/ union { -- GitLab From 539d8264093560b917ee3afe4c7f74e5da09d6a5 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 14 Jul 2008 17:31:10 -0700 Subject: [PATCH 0493/1024] [PATCH 2/2] ocfs2: Fix race between mount and recovery As the fs recovery is asynchronous, there is a small chance that another node can mount (and thus recover) the slot before the recovery thread gets to it. If this happens, the recovery thread will block indefinitely on the journal/slot lock as that lock will be held for the duration of the mount (by design) by the node assigned to that slot. The solution implemented is to keep track of the journal replays using a recovery generation in the journal inode, which will be incremented by the thread replaying that journal. The recovery thread, before attempting the blocking lock on the journal/slot lock, will compare the generation on disk with what it has cached and skip recovery if it does not match. This bug appears to have been inadvertently introduced during the mount/umount vote removal by mainline commit 34d024f84345807bf44163fac84e921513dde323. In the mount voting scheme, the messaging would indirectly indicate that the slot was being recovered. Signed-off-by: Sunil Mushran Signed-off-by: Mark Fasheh --- fs/ocfs2/journal.c | 173 ++++++++++++++++++++++++++++++++++----------- fs/ocfs2/journal.h | 3 +- fs/ocfs2/ocfs2.h | 2 + fs/ocfs2/super.c | 12 +++- 4 files changed, 148 insertions(+), 42 deletions(-) diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index a8c19cb3cfd..7a37240f7a3 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -57,7 +57,7 @@ static int __ocfs2_recovery_thread(void *arg); static int ocfs2_commit_cache(struct ocfs2_super *osb); static int ocfs2_wait_on_mount(struct ocfs2_super *osb); static int ocfs2_journal_toggle_dirty(struct ocfs2_super *osb, - int dirty); + int dirty, int replayed); static int ocfs2_trylock_journal(struct ocfs2_super *osb, int slot_num); static int ocfs2_recover_orphans(struct ocfs2_super *osb, @@ -562,8 +562,18 @@ done: return status; } +static void ocfs2_bump_recovery_generation(struct ocfs2_dinode *di) +{ + le32_add_cpu(&(di->id1.journal1.ij_recovery_generation), 1); +} + +static u32 ocfs2_get_recovery_generation(struct ocfs2_dinode *di) +{ + return le32_to_cpu(di->id1.journal1.ij_recovery_generation); +} + static int ocfs2_journal_toggle_dirty(struct ocfs2_super *osb, - int dirty) + int dirty, int replayed) { int status; unsigned int flags; @@ -593,6 +603,9 @@ static int ocfs2_journal_toggle_dirty(struct ocfs2_super *osb, flags &= ~OCFS2_JOURNAL_DIRTY_FL; fe->id1.journal1.ij_flags = cpu_to_le32(flags); + if (replayed) + ocfs2_bump_recovery_generation(fe); + status = ocfs2_write_block(osb, bh, journal->j_inode); if (status < 0) mlog_errno(status); @@ -667,7 +680,7 @@ void ocfs2_journal_shutdown(struct ocfs2_super *osb) * Do not toggle if flush was unsuccessful otherwise * will leave dirty metadata in a "clean" journal */ - status = ocfs2_journal_toggle_dirty(osb, 0); + status = ocfs2_journal_toggle_dirty(osb, 0, 0); if (status < 0) mlog_errno(status); } @@ -710,7 +723,7 @@ static void ocfs2_clear_journal_error(struct super_block *sb, } } -int ocfs2_journal_load(struct ocfs2_journal *journal, int local) +int ocfs2_journal_load(struct ocfs2_journal *journal, int local, int replayed) { int status = 0; struct ocfs2_super *osb; @@ -729,7 +742,7 @@ int ocfs2_journal_load(struct ocfs2_journal *journal, int local) ocfs2_clear_journal_error(osb->sb, journal->j_journal, osb->slot_num); - status = ocfs2_journal_toggle_dirty(osb, 1); + status = ocfs2_journal_toggle_dirty(osb, 1, replayed); if (status < 0) { mlog_errno(status); goto done; @@ -771,7 +784,7 @@ int ocfs2_journal_wipe(struct ocfs2_journal *journal, int full) goto bail; } - status = ocfs2_journal_toggle_dirty(journal->j_osb, 0); + status = ocfs2_journal_toggle_dirty(journal->j_osb, 0, 0); if (status < 0) mlog_errno(status); @@ -1034,6 +1047,12 @@ restart: spin_unlock(&osb->osb_lock); mlog(0, "All nodes recovered\n"); + /* Refresh all journal recovery generations from disk */ + status = ocfs2_check_journals_nolocks(osb); + status = (status == -EROFS) ? 0 : status; + if (status < 0) + mlog_errno(status); + ocfs2_super_unlock(osb, 1); /* We always run recovery on our own orphan dir - the dead @@ -1096,6 +1115,42 @@ out: mlog_exit_void(); } +static int ocfs2_read_journal_inode(struct ocfs2_super *osb, + int slot_num, + struct buffer_head **bh, + struct inode **ret_inode) +{ + int status = -EACCES; + struct inode *inode = NULL; + + BUG_ON(slot_num >= osb->max_slots); + + inode = ocfs2_get_system_file_inode(osb, JOURNAL_SYSTEM_INODE, + slot_num); + if (!inode || is_bad_inode(inode)) { + mlog_errno(status); + goto bail; + } + SET_INODE_JOURNAL(inode); + + status = ocfs2_read_block(osb, OCFS2_I(inode)->ip_blkno, bh, 0, inode); + if (status < 0) { + mlog_errno(status); + goto bail; + } + + status = 0; + +bail: + if (inode) { + if (status || !ret_inode) + iput(inode); + else + *ret_inode = inode; + } + return status; +} + /* Does the actual journal replay and marks the journal inode as * clean. Will only replay if the journal inode is marked dirty. */ static int ocfs2_replay_journal(struct ocfs2_super *osb, @@ -1109,22 +1164,36 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb, struct ocfs2_dinode *fe; journal_t *journal = NULL; struct buffer_head *bh = NULL; + u32 slot_reco_gen; - inode = ocfs2_get_system_file_inode(osb, JOURNAL_SYSTEM_INODE, - slot_num); - if (inode == NULL) { - status = -EACCES; + status = ocfs2_read_journal_inode(osb, slot_num, &bh, &inode); + if (status) { mlog_errno(status); goto done; } - if (is_bad_inode(inode)) { - status = -EACCES; - iput(inode); - inode = NULL; - mlog_errno(status); + + fe = (struct ocfs2_dinode *)bh->b_data; + slot_reco_gen = ocfs2_get_recovery_generation(fe); + brelse(bh); + bh = NULL; + + /* + * As the fs recovery is asynchronous, there is a small chance that + * another node mounted (and recovered) the slot before the recovery + * thread could get the lock. To handle that, we dirty read the journal + * inode for that slot to get the recovery generation. If it is + * different than what we expected, the slot has been recovered. + * If not, it needs recovery. + */ + if (osb->slot_recovery_generations[slot_num] != slot_reco_gen) { + mlog(0, "Slot %u already recovered (old/new=%u/%u)\n", slot_num, + osb->slot_recovery_generations[slot_num], slot_reco_gen); + osb->slot_recovery_generations[slot_num] = slot_reco_gen; + status = -EBUSY; goto done; } - SET_INODE_JOURNAL(inode); + + /* Continue with recovery as the journal has not yet been recovered */ status = ocfs2_inode_lock_full(inode, &bh, 1, OCFS2_META_LOCK_RECOVERY); if (status < 0) { @@ -1138,9 +1207,12 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb, fe = (struct ocfs2_dinode *) bh->b_data; flags = le32_to_cpu(fe->id1.journal1.ij_flags); + slot_reco_gen = ocfs2_get_recovery_generation(fe); if (!(flags & OCFS2_JOURNAL_DIRTY_FL)) { mlog(0, "No recovery required for node %d\n", node_num); + /* Refresh recovery generation for the slot */ + osb->slot_recovery_generations[slot_num] = slot_reco_gen; goto done; } @@ -1188,6 +1260,11 @@ static int ocfs2_replay_journal(struct ocfs2_super *osb, flags &= ~OCFS2_JOURNAL_DIRTY_FL; fe->id1.journal1.ij_flags = cpu_to_le32(flags); + /* Increment recovery generation to indicate successful recovery */ + ocfs2_bump_recovery_generation(fe); + osb->slot_recovery_generations[slot_num] = + ocfs2_get_recovery_generation(fe); + status = ocfs2_write_block(osb, bh, inode); if (status < 0) mlog_errno(status); @@ -1252,6 +1329,13 @@ static int ocfs2_recover_node(struct ocfs2_super *osb, status = ocfs2_replay_journal(osb, node_num, slot_num); if (status < 0) { + if (status == -EBUSY) { + mlog(0, "Skipping recovery for slot %u (node %u) " + "as another node has recovered it\n", slot_num, + node_num); + status = 0; + goto done; + } mlog_errno(status); goto done; } @@ -1334,12 +1418,29 @@ int ocfs2_mark_dead_nodes(struct ocfs2_super *osb) { unsigned int node_num; int status, i; + struct buffer_head *bh = NULL; + struct ocfs2_dinode *di; /* This is called with the super block cluster lock, so we * know that the slot map can't change underneath us. */ spin_lock(&osb->osb_lock); for (i = 0; i < osb->max_slots; i++) { + /* Read journal inode to get the recovery generation */ + status = ocfs2_read_journal_inode(osb, i, &bh, NULL); + if (status) { + mlog_errno(status); + goto bail; + } + di = (struct ocfs2_dinode *)bh->b_data; + osb->slot_recovery_generations[i] = + ocfs2_get_recovery_generation(di); + brelse(bh); + bh = NULL; + + mlog(0, "Slot %u recovery generation is %u\n", i, + osb->slot_recovery_generations[i]); + if (i == osb->slot_num) continue; @@ -1603,49 +1704,41 @@ static int ocfs2_commit_thread(void *arg) return 0; } -/* Look for a dirty journal without taking any cluster locks. Used for - * hard readonly access to determine whether the file system journals - * require recovery. */ +/* Reads all the journal inodes without taking any cluster locks. Used + * for hard readonly access to determine whether any journal requires + * recovery. Also used to refresh the recovery generation numbers after + * a journal has been recovered by another node. + */ int ocfs2_check_journals_nolocks(struct ocfs2_super *osb) { int ret = 0; unsigned int slot; - struct buffer_head *di_bh; + struct buffer_head *di_bh = NULL; struct ocfs2_dinode *di; - struct inode *journal = NULL; + int journal_dirty = 0; for(slot = 0; slot < osb->max_slots; slot++) { - journal = ocfs2_get_system_file_inode(osb, - JOURNAL_SYSTEM_INODE, - slot); - if (!journal || is_bad_inode(journal)) { - ret = -EACCES; - mlog_errno(ret); - goto out; - } - - di_bh = NULL; - ret = ocfs2_read_block(osb, OCFS2_I(journal)->ip_blkno, &di_bh, - 0, journal); - if (ret < 0) { + ret = ocfs2_read_journal_inode(osb, slot, &di_bh, NULL); + if (ret) { mlog_errno(ret); goto out; } di = (struct ocfs2_dinode *) di_bh->b_data; + osb->slot_recovery_generations[slot] = + ocfs2_get_recovery_generation(di); + if (le32_to_cpu(di->id1.journal1.ij_flags) & OCFS2_JOURNAL_DIRTY_FL) - ret = -EROFS; + journal_dirty = 1; brelse(di_bh); - if (ret) - break; + di_bh = NULL; } out: - if (journal) - iput(journal); - + if (journal_dirty) + ret = -EROFS; return ret; } diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h index db82be2532e..2178ebffa05 100644 --- a/fs/ocfs2/journal.h +++ b/fs/ocfs2/journal.h @@ -161,7 +161,8 @@ int ocfs2_journal_init(struct ocfs2_journal *journal, void ocfs2_journal_shutdown(struct ocfs2_super *osb); int ocfs2_journal_wipe(struct ocfs2_journal *journal, int full); -int ocfs2_journal_load(struct ocfs2_journal *journal, int local); +int ocfs2_journal_load(struct ocfs2_journal *journal, int local, + int replayed); int ocfs2_check_journals_nolocks(struct ocfs2_super *osb); void ocfs2_recovery_thread(struct ocfs2_super *osb, int node_num); diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 1cb814be8ef..7f625f2b111 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -204,6 +204,8 @@ struct ocfs2_super struct ocfs2_slot_info *slot_info; + u32 *slot_recovery_generations; + spinlock_t node_map_lock; u64 root_blkno; diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 2560b33889a..88255d3f52b 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1442,6 +1442,15 @@ static int ocfs2_initialize_super(struct super_block *sb, } mlog(0, "max_slots for this device: %u\n", osb->max_slots); + osb->slot_recovery_generations = + kcalloc(osb->max_slots, sizeof(*osb->slot_recovery_generations), + GFP_KERNEL); + if (!osb->slot_recovery_generations) { + status = -ENOMEM; + mlog_errno(status); + goto bail; + } + init_waitqueue_head(&osb->osb_wipe_event); osb->osb_orphan_wipes = kcalloc(osb->max_slots, sizeof(*osb->osb_orphan_wipes), @@ -1703,7 +1712,7 @@ static int ocfs2_check_volume(struct ocfs2_super *osb) local = ocfs2_mount_local(osb); /* will play back anything left in the journal. */ - status = ocfs2_journal_load(osb->journal, local); + status = ocfs2_journal_load(osb->journal, local, dirty); if (status < 0) { mlog(ML_ERROR, "ocfs2 journal load failed! %d\n", status); goto finally; @@ -1768,6 +1777,7 @@ static void ocfs2_delete_osb(struct ocfs2_super *osb) ocfs2_free_slot_info(osb); kfree(osb->osb_orphan_wipes); + kfree(osb->slot_recovery_generations); /* FIXME * This belongs in journal shutdown, but because we have to * allocate osb->journal at the start of ocfs2_initalize_osb(), -- GitLab From 961cecbee6786f4b1f1b8f695e87045b583f9f49 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Wed, 16 Jul 2008 17:22:22 -0700 Subject: [PATCH 0494/1024] [PATCH] ocfs2: Fix oops when racing files truncates with writes into an mmap region This patch fixes an oops that is reproduced when one races writes to a mmap-ed region with another process truncating the file. Signed-off-by: Sunil Mushran Signed-off-by: Mark Fasheh --- fs/ocfs2/aops.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index 1db080135c6..506c24fb507 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -1073,12 +1073,15 @@ static void ocfs2_write_failure(struct inode *inode, for(i = 0; i < wc->w_num_pages; i++) { tmppage = wc->w_pages[i]; - if (ocfs2_should_order_data(inode)) - walk_page_buffers(wc->w_handle, page_buffers(tmppage), - from, to, NULL, - ocfs2_journal_dirty_data); - - block_commit_write(tmppage, from, to); + if (page_has_buffers(tmppage)) { + if (ocfs2_should_order_data(inode)) + walk_page_buffers(wc->w_handle, + page_buffers(tmppage), + from, to, NULL, + ocfs2_journal_dirty_data); + + block_commit_write(tmppage, from, to); + } } } @@ -1901,12 +1904,14 @@ int ocfs2_write_end_nolock(struct address_space *mapping, to = PAGE_CACHE_SIZE; } - if (ocfs2_should_order_data(inode)) - walk_page_buffers(wc->w_handle, page_buffers(tmppage), - from, to, NULL, - ocfs2_journal_dirty_data); - - block_commit_write(tmppage, from, to); + if (page_has_buffers(tmppage)) { + if (ocfs2_should_order_data(inode)) + walk_page_buffers(wc->w_handle, + page_buffers(tmppage), + from, to, NULL, + ocfs2_journal_dirty_data); + block_commit_write(tmppage, from, to); + } } out_write_size: -- GitLab From c259ae52e204d42f8b2d484c85517a4c367030e1 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 21 Jul 2008 09:59:15 +0200 Subject: [PATCH 0495/1024] [PATCH] ocfs2: Release mutex in error handling code The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // Signed-off-by: Julia Lawall Signed-off-by: Mark Fasheh --- fs/ocfs2/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index be2dd95d3a1..ec2ed15c3da 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1766,8 +1766,8 @@ out_inode_unlock: out_rw_unlock: ocfs2_rw_unlock(inode, 1); - mutex_unlock(&inode->i_mutex); out: + mutex_unlock(&inode->i_mutex); return ret; } -- GitLab From c3f26a269c2421f97f10cf8ed05d5099b573af4d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 31 Jul 2008 16:58:50 -0700 Subject: [PATCH 0496/1024] netdev: Fix lockdep warnings in multiqueue configurations. When support for multiple TX queues were added, the netif_tx_lock() routines we converted to iterate over all TX queues and grab each queue's spinlock. This causes heartburn for lockdep and it's not a healthy thing to do with lots of TX queues anyways. So modify this to use a top-level lock and a "frozen" state for the individual TX queues. Signed-off-by: David S. Miller --- drivers/net/ifb.c | 12 +++--- include/linux/netdevice.h | 86 +++++++++++++++++++++++++-------------- net/core/dev.c | 1 + net/core/netpoll.c | 1 + net/core/pktgen.c | 7 +++- net/sched/sch_generic.c | 6 ++- net/sched/sch_teql.c | 9 ++-- 7 files changed, 78 insertions(+), 44 deletions(-) diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c index 0960e69b2da..e4fbefc8c82 100644 --- a/drivers/net/ifb.c +++ b/drivers/net/ifb.c @@ -69,18 +69,20 @@ static void ri_tasklet(unsigned long dev) struct net_device *_dev = (struct net_device *)dev; struct ifb_private *dp = netdev_priv(_dev); struct net_device_stats *stats = &_dev->stats; + struct netdev_queue *txq; struct sk_buff *skb; + txq = netdev_get_tx_queue(_dev, 0); dp->st_task_enter++; if ((skb = skb_peek(&dp->tq)) == NULL) { dp->st_txq_refl_try++; - if (netif_tx_trylock(_dev)) { + if (__netif_tx_trylock(txq)) { dp->st_rxq_enter++; while ((skb = skb_dequeue(&dp->rq)) != NULL) { skb_queue_tail(&dp->tq, skb); dp->st_rx2tx_tran++; } - netif_tx_unlock(_dev); + __netif_tx_unlock(txq); } else { /* reschedule */ dp->st_rxq_notenter++; @@ -115,7 +117,7 @@ static void ri_tasklet(unsigned long dev) BUG(); } - if (netif_tx_trylock(_dev)) { + if (__netif_tx_trylock(txq)) { dp->st_rxq_check++; if ((skb = skb_peek(&dp->rq)) == NULL) { dp->tasklet_pending = 0; @@ -123,10 +125,10 @@ static void ri_tasklet(unsigned long dev) netif_wake_queue(_dev); } else { dp->st_rxq_rsch++; - netif_tx_unlock(_dev); + __netif_tx_unlock(txq); goto resched; } - netif_tx_unlock(_dev); + __netif_tx_unlock(txq); } else { resched: dp->tasklet_pending = 1; diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index b4d056ceab9..ee583f642a9 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -440,6 +440,7 @@ static inline void napi_synchronize(const struct napi_struct *n) enum netdev_queue_state_t { __QUEUE_STATE_XOFF, + __QUEUE_STATE_FROZEN, }; struct netdev_queue { @@ -636,7 +637,7 @@ struct net_device unsigned int real_num_tx_queues; unsigned long tx_queue_len; /* Max frames per queue allowed */ - + spinlock_t tx_global_lock; /* * One part is mostly used on xmit path (device) */ @@ -1099,6 +1100,11 @@ static inline int netif_queue_stopped(const struct net_device *dev) return netif_tx_queue_stopped(netdev_get_tx_queue(dev, 0)); } +static inline int netif_tx_queue_frozen(const struct netdev_queue *dev_queue) +{ + return test_bit(__QUEUE_STATE_FROZEN, &dev_queue->state); +} + /** * netif_running - test if up * @dev: network device @@ -1475,6 +1481,26 @@ static inline void __netif_tx_lock_bh(struct netdev_queue *txq) txq->xmit_lock_owner = smp_processor_id(); } +static inline int __netif_tx_trylock(struct netdev_queue *txq) +{ + int ok = spin_trylock(&txq->_xmit_lock); + if (likely(ok)) + txq->xmit_lock_owner = smp_processor_id(); + return ok; +} + +static inline void __netif_tx_unlock(struct netdev_queue *txq) +{ + txq->xmit_lock_owner = -1; + spin_unlock(&txq->_xmit_lock); +} + +static inline void __netif_tx_unlock_bh(struct netdev_queue *txq) +{ + txq->xmit_lock_owner = -1; + spin_unlock_bh(&txq->_xmit_lock); +} + /** * netif_tx_lock - grab network device transmit lock * @dev: network device @@ -1484,12 +1510,23 @@ static inline void __netif_tx_lock_bh(struct netdev_queue *txq) */ static inline void netif_tx_lock(struct net_device *dev) { - int cpu = smp_processor_id(); unsigned int i; + int cpu; + spin_lock(&dev->tx_global_lock); + cpu = smp_processor_id(); for (i = 0; i < dev->num_tx_queues; i++) { struct netdev_queue *txq = netdev_get_tx_queue(dev, i); + + /* We are the only thread of execution doing a + * freeze, but we have to grab the _xmit_lock in + * order to synchronize with threads which are in + * the ->hard_start_xmit() handler and already + * checked the frozen bit. + */ __netif_tx_lock(txq, cpu); + set_bit(__QUEUE_STATE_FROZEN, &txq->state); + __netif_tx_unlock(txq); } } @@ -1499,40 +1536,22 @@ static inline void netif_tx_lock_bh(struct net_device *dev) netif_tx_lock(dev); } -static inline int __netif_tx_trylock(struct netdev_queue *txq) -{ - int ok = spin_trylock(&txq->_xmit_lock); - if (likely(ok)) - txq->xmit_lock_owner = smp_processor_id(); - return ok; -} - -static inline int netif_tx_trylock(struct net_device *dev) -{ - return __netif_tx_trylock(netdev_get_tx_queue(dev, 0)); -} - -static inline void __netif_tx_unlock(struct netdev_queue *txq) -{ - txq->xmit_lock_owner = -1; - spin_unlock(&txq->_xmit_lock); -} - -static inline void __netif_tx_unlock_bh(struct netdev_queue *txq) -{ - txq->xmit_lock_owner = -1; - spin_unlock_bh(&txq->_xmit_lock); -} - static inline void netif_tx_unlock(struct net_device *dev) { unsigned int i; for (i = 0; i < dev->num_tx_queues; i++) { struct netdev_queue *txq = netdev_get_tx_queue(dev, i); - __netif_tx_unlock(txq); - } + /* No need to grab the _xmit_lock here. If the + * queue is not stopped for another reason, we + * force a schedule. + */ + clear_bit(__QUEUE_STATE_FROZEN, &txq->state); + if (!test_bit(__QUEUE_STATE_XOFF, &txq->state)) + __netif_schedule(txq->qdisc); + } + spin_unlock(&dev->tx_global_lock); } static inline void netif_tx_unlock_bh(struct net_device *dev) @@ -1556,13 +1575,18 @@ static inline void netif_tx_unlock_bh(struct net_device *dev) static inline void netif_tx_disable(struct net_device *dev) { unsigned int i; + int cpu; - netif_tx_lock_bh(dev); + local_bh_disable(); + cpu = smp_processor_id(); for (i = 0; i < dev->num_tx_queues; i++) { struct netdev_queue *txq = netdev_get_tx_queue(dev, i); + + __netif_tx_lock(txq, cpu); netif_tx_stop_queue(txq); + __netif_tx_unlock(txq); } - netif_tx_unlock_bh(dev); + local_bh_enable(); } static inline void netif_addr_lock(struct net_device *dev) diff --git a/net/core/dev.c b/net/core/dev.c index 63d6bcddbf4..69320a56a08 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4200,6 +4200,7 @@ static void netdev_init_queues(struct net_device *dev) { netdev_init_one_queue(dev, &dev->rx_queue, NULL); netdev_for_each_tx_queue(dev, netdev_init_one_queue, NULL); + spin_lock_init(&dev->tx_global_lock); } /** diff --git a/net/core/netpoll.c b/net/core/netpoll.c index c12720895ec..6c7af390be0 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -70,6 +70,7 @@ static void queue_process(struct work_struct *work) local_irq_save(flags); __netif_tx_lock(txq, smp_processor_id()); if (netif_tx_queue_stopped(txq) || + netif_tx_queue_frozen(txq) || dev->hard_start_xmit(skb, dev) != NETDEV_TX_OK) { skb_queue_head(&npinfo->txq, skb); __netif_tx_unlock(txq); diff --git a/net/core/pktgen.c b/net/core/pktgen.c index c7d484f7e1c..3284605f2ec 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -3305,6 +3305,7 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev) txq = netdev_get_tx_queue(odev, queue_map); if (netif_tx_queue_stopped(txq) || + netif_tx_queue_frozen(txq) || need_resched()) { idle_start = getCurUs(); @@ -3320,7 +3321,8 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev) pkt_dev->idle_acc += getCurUs() - idle_start; - if (netif_tx_queue_stopped(txq)) { + if (netif_tx_queue_stopped(txq) || + netif_tx_queue_frozen(txq)) { pkt_dev->next_tx_us = getCurUs(); /* TODO */ pkt_dev->next_tx_ns = 0; goto out; /* Try the next interface */ @@ -3352,7 +3354,8 @@ static __inline__ void pktgen_xmit(struct pktgen_dev *pkt_dev) txq = netdev_get_tx_queue(odev, queue_map); __netif_tx_lock_bh(txq); - if (!netif_tx_queue_stopped(txq)) { + if (!netif_tx_queue_stopped(txq) && + !netif_tx_queue_frozen(txq)) { atomic_inc(&(pkt_dev->skb->users)); retry_now: diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 345838a2e36..9c9cd4d9489 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -135,7 +135,8 @@ static inline int qdisc_restart(struct Qdisc *q) txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb)); HARD_TX_LOCK(dev, txq, smp_processor_id()); - if (!netif_subqueue_stopped(dev, skb)) + if (!netif_tx_queue_stopped(txq) && + !netif_tx_queue_frozen(txq)) ret = dev_hard_start_xmit(skb, dev, txq); HARD_TX_UNLOCK(dev, txq); @@ -162,7 +163,8 @@ static inline int qdisc_restart(struct Qdisc *q) break; } - if (ret && netif_tx_queue_stopped(txq)) + if (ret && (netif_tx_queue_stopped(txq) || + netif_tx_queue_frozen(txq))) ret = 0; return ret; diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c index 537223642b6..2c35c678563 100644 --- a/net/sched/sch_teql.c +++ b/net/sched/sch_teql.c @@ -305,10 +305,11 @@ restart: switch (teql_resolve(skb, skb_res, slave)) { case 0: - if (netif_tx_trylock(slave)) { - if (!__netif_subqueue_stopped(slave, subq) && + if (__netif_tx_trylock(slave_txq)) { + if (!netif_tx_queue_stopped(slave_txq) && + !netif_tx_queue_frozen(slave_txq) && slave->hard_start_xmit(skb, slave) == 0) { - netif_tx_unlock(slave); + __netif_tx_unlock(slave_txq); master->slaves = NEXT_SLAVE(q); netif_wake_queue(dev); master->stats.tx_packets++; @@ -316,7 +317,7 @@ restart: qdisc_pkt_len(skb); return 0; } - netif_tx_unlock(slave); + __netif_tx_unlock(slave_txq); } if (netif_queue_stopped(dev)) busy = 1; -- GitLab From 388667bed591b2359713bb17d5de0cf56e961447 Mon Sep 17 00:00:00 2001 From: Arthur Jones Date: Fri, 25 Jul 2008 12:03:38 -0700 Subject: [PATCH 0497/1024] md: raid10: wake up frozen array When rescheduling a bio in raid10, we wake up the md thread, but if the array is frozen, this will have no effect. This causes the array to remain frozen for eternity. We add a wake_up to allow the array to de-freeze. This code is nearly identical to the raid1 code, which has this fix already. Signed-off-by: Arthur Jones Signed-off-by: NeilBrown --- drivers/md/raid10.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 2acea402524..8674a5f7e70 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -215,6 +215,9 @@ static void reschedule_retry(r10bio_t *r10_bio) conf->nr_queued ++; spin_unlock_irqrestore(&conf->device_lock, flags); + /* wake up frozen array... */ + wake_up(&conf->wait_barrier); + md_wakeup_thread(mddev->thread); } -- GitLab From 6717c282e407650c29e7b058623d89f543015a33 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 31 Jul 2008 20:32:35 -0700 Subject: [PATCH 0498/1024] sparc: Add __KERNEL__ ifdef protection to pt_regs helpers. Some of them use 'bool' and whatnot and therefore are not kosher for userspace, so don't export them there. Reported by Roland McGrath. Signed-off-by: David S. Miller --- arch/sparc/include/asm/ptrace_32.h | 20 +++++++++---------- arch/sparc/include/asm/ptrace_64.h | 31 +++++++++++++++--------------- 2 files changed, 25 insertions(+), 26 deletions(-) diff --git a/arch/sparc/include/asm/ptrace_32.h b/arch/sparc/include/asm/ptrace_32.h index d43c88b8683..d409c4f21a5 100644 --- a/arch/sparc/include/asm/ptrace_32.h +++ b/arch/sparc/include/asm/ptrace_32.h @@ -40,16 +40,6 @@ struct pt_regs { #define UREG_FP UREG_I6 #define UREG_RETPC UREG_I7 -static inline bool pt_regs_is_syscall(struct pt_regs *regs) -{ - return (regs->psr & PSR_SYSCALL); -} - -static inline bool pt_regs_clear_syscall(struct pt_regs *regs) -{ - return (regs->psr &= ~PSR_SYSCALL); -} - /* A register window */ struct reg_window { unsigned long locals[8]; @@ -72,6 +62,16 @@ struct sparc_stackf { #ifdef __KERNEL__ +static inline bool pt_regs_is_syscall(struct pt_regs *regs) +{ + return (regs->psr & PSR_SYSCALL); +} + +static inline bool pt_regs_clear_syscall(struct pt_regs *regs) +{ + return (regs->psr &= ~PSR_SYSCALL); +} + #define user_mode(regs) (!((regs)->psr & PSR_PS)) #define instruction_pointer(regs) ((regs)->pc) #define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP]) diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h index 390d92ac67c..06e4914c13f 100644 --- a/arch/sparc/include/asm/ptrace_64.h +++ b/arch/sparc/include/asm/ptrace_64.h @@ -37,21 +37,6 @@ struct pt_regs { unsigned int magic; }; -static inline int pt_regs_trap_type(struct pt_regs *regs) -{ - return regs->magic & 0x1ff; -} - -static inline bool pt_regs_is_syscall(struct pt_regs *regs) -{ - return (regs->tstate & TSTATE_SYSCALL); -} - -static inline bool pt_regs_clear_syscall(struct pt_regs *regs) -{ - return (regs->tstate &= ~TSTATE_SYSCALL); -} - struct pt_regs32 { unsigned int psr; unsigned int pc; @@ -128,6 +113,21 @@ struct sparc_trapf { #ifdef __KERNEL__ +static inline int pt_regs_trap_type(struct pt_regs *regs) +{ + return regs->magic & 0x1ff; +} + +static inline bool pt_regs_is_syscall(struct pt_regs *regs) +{ + return (regs->tstate & TSTATE_SYSCALL); +} + +static inline bool pt_regs_clear_syscall(struct pt_regs *regs) +{ + return (regs->tstate &= ~TSTATE_SYSCALL); +} + struct global_reg_snapshot { unsigned long tstate; unsigned long tpc; @@ -154,7 +154,6 @@ extern unsigned long profile_pc(struct pt_regs *); #define profile_pc(regs) instruction_pointer(regs) #endif extern void show_regs(struct pt_regs *); -extern void __show_regs(struct pt_regs *); #endif #else /* __ASSEMBLY__ */ -- GitLab From dbf3e950679b2588e554baa4da94c445c7903e24 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 31 Jul 2008 20:33:43 -0700 Subject: [PATCH 0499/1024] sparc64: Kill __show_regs(). The story is that what we used to do when we actually used smp_report_regs() is that if you specifically only wanted to have the current cpu's registers dumped you would call "__show_regs()" otherwise you would call show_regs() which also invoked smp_report_regs(). Now that we killed off smp_report_regs() there is no longer any reason to have these two routines, just show_regs() is sufficient. Also kill off a stray declaration of show_regs() in sparc64_ksym.c Signed-off-by: David S. Miller --- arch/sparc64/kernel/process.c | 26 +------------------------- arch/sparc64/kernel/sparc64_ksyms.c | 1 - arch/sparc64/kernel/traps.c | 4 ++-- 3 files changed, 3 insertions(+), 28 deletions(-) diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index bf740e039b7..7f5debdc5fe 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -211,22 +211,8 @@ static void show_regwindow(struct pt_regs *regs) printk("I7: <%pS>\n", (void *) rwk->ins[7]); } -#ifdef CONFIG_SMP -static DEFINE_SPINLOCK(regdump_lock); -#endif - -void __show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { -#ifdef CONFIG_SMP - unsigned long flags; - - /* Protect against xcall ipis which might lead to livelock on the lock */ - __asm__ __volatile__("rdpr %%pstate, %0\n\t" - "wrpr %0, %1, %%pstate" - : "=r" (flags) - : "i" (PSTATE_IE)); - spin_lock(®dump_lock); -#endif printk("TSTATE: %016lx TPC: %016lx TNPC: %016lx Y: %08x %s\n", regs->tstate, regs->tpc, regs->tnpc, regs->y, print_tainted()); printk("TPC: <%pS>\n", (void *) regs->tpc); @@ -244,16 +230,6 @@ void __show_regs(struct pt_regs * regs) regs->u_regs[15]); printk("RPC: <%pS>\n", (void *) regs->u_regs[15]); show_regwindow(regs); -#ifdef CONFIG_SMP - spin_unlock(®dump_lock); - __asm__ __volatile__("wrpr %0, 0, %%pstate" - : : "r" (flags)); -#endif -} - -void show_regs(struct pt_regs *regs) -{ - __show_regs(regs); } struct global_reg_snapshot global_reg_snapshot[NR_CPUS]; diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index 504e678ee12..0804f71df6c 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -68,7 +68,6 @@ extern void *__memscan_zero(void *, size_t); extern void *__memscan_generic(void *, int, size_t); extern int __memcmp(const void *, const void *, __kernel_size_t); extern __kernel_size_t strlen(const char *); -extern void show_regs(struct pt_regs *); extern void syscall_trace(struct pt_regs *, int); extern void sys_sigsuspend(void); extern int compat_sys_ioctl(unsigned int fd, unsigned int cmd, u32 arg); diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index f56b6fe78e9..404e8561e2d 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -1777,7 +1777,7 @@ static void sun4v_log_error(struct pt_regs *regs, struct sun4v_error_entry *ent, pfx, ent->err_raddr, ent->err_size, ent->err_cpu); - __show_regs(regs); + show_regs(regs); if ((cnt = atomic_read(ocnt)) != 0) { atomic_set(ocnt, 0); @@ -2189,7 +2189,7 @@ void die_if_kernel(char *str, struct pt_regs *regs) printk("%s(%d): %s [#%d]\n", current->comm, task_pid_nr(current), str, ++die_counter); notify_die(DIE_OOPS, str, regs, 0, 255, SIGSEGV); __asm__ __volatile__("flushw"); - __show_regs(regs); + show_regs(regs); add_taint(TAINT_DIE); if (regs->tstate & TSTATE_PRIV) { struct reg_window *rw = (struct reg_window *) -- GitLab From 0a4949c4414af2eb91414bcd8e2a8ac3706f7dde Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 31 Jul 2008 20:40:46 -0700 Subject: [PATCH 0500/1024] sparc64: Do not clobber %g7 in setcontext() trap. That's the userland thread register, so we should never try to change it like this. Based upon glibc bug nptl/6577 and suggestions by Jakub Jelinek. Signed-off-by: David S. Miller --- arch/sparc64/kernel/signal.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c index d1b84456a9e..ca5a6ae3a6e 100644 --- a/arch/sparc64/kernel/signal.c +++ b/arch/sparc64/kernel/signal.c @@ -2,7 +2,7 @@ * arch/sparc64/kernel/signal.c * * Copyright (C) 1991, 1992 Linus Torvalds - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1995, 2008 David S. Miller (davem@davemloft.net) * Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx) * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) @@ -91,7 +91,9 @@ asmlinkage void sparc64_set_context(struct pt_regs *regs) err |= __get_user(regs->u_regs[UREG_G4], (&(*grp)[MC_G4])); err |= __get_user(regs->u_regs[UREG_G5], (&(*grp)[MC_G5])); err |= __get_user(regs->u_regs[UREG_G6], (&(*grp)[MC_G6])); - err |= __get_user(regs->u_regs[UREG_G7], (&(*grp)[MC_G7])); + + /* Skip %g7 as that's the thread register in userspace. */ + err |= __get_user(regs->u_regs[UREG_I0], (&(*grp)[MC_O0])); err |= __get_user(regs->u_regs[UREG_I1], (&(*grp)[MC_O1])); err |= __get_user(regs->u_regs[UREG_I2], (&(*grp)[MC_O2])); -- GitLab From 9b257714a3f6f5c3ea133c44d3442e2340734b65 Mon Sep 17 00:00:00 2001 From: Juerg Haefliger Date: Tue, 25 Mar 2008 21:49:02 -0700 Subject: [PATCH 0501/1024] hwmon: (dme1737) demacrofy for readability This patch gets rid of a couple of macros previously used for sysfs attribute generation and manipulation. This makes the source a little bigger but a lot more readable and maintainable. It also fixes an issue with pwm5 & pwm6 attributes not being created read-only initially. Signed-Off-By: Juerg Haefliger Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- drivers/hwmon/dme1737.c | 255 ++++++++++++++++++++++++---------------- 1 file changed, 154 insertions(+), 101 deletions(-) diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 7673f65877e..c24b5b370da 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -1501,9 +1501,9 @@ SENSOR_DEVICE_ATTR_PWM_1TO3(3); /* PWMs 5-6 */ #define SENSOR_DEVICE_ATTR_PWM_5TO6(ix) \ -static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO | S_IWUSR, \ +static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \ show_pwm, set_pwm, SYS_PWM, ix-1); \ -static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO | S_IWUSR, \ +static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \ show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \ static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \ show_pwm, NULL, SYS_PWM_ENABLE, ix-1) @@ -1517,91 +1517,75 @@ static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); /* for ISA devices */ -#define SENSOR_DEV_ATTR_IN(ix) \ -&sensor_dev_attr_in##ix##_input.dev_attr.attr, \ -&sensor_dev_attr_in##ix##_min.dev_attr.attr, \ -&sensor_dev_attr_in##ix##_max.dev_attr.attr, \ -&sensor_dev_attr_in##ix##_alarm.dev_attr.attr - -/* These attributes are read-writeable only if the chip is *not* locked */ -#define SENSOR_DEV_ATTR_TEMP_LOCK(ix) \ -&sensor_dev_attr_temp##ix##_offset.dev_attr.attr - -#define SENSOR_DEV_ATTR_TEMP(ix) \ -SENSOR_DEV_ATTR_TEMP_LOCK(ix), \ -&sensor_dev_attr_temp##ix##_input.dev_attr.attr, \ -&sensor_dev_attr_temp##ix##_min.dev_attr.attr, \ -&sensor_dev_attr_temp##ix##_max.dev_attr.attr, \ -&sensor_dev_attr_temp##ix##_alarm.dev_attr.attr, \ -&sensor_dev_attr_temp##ix##_fault.dev_attr.attr - -/* These attributes are read-writeable only if the chip is *not* locked */ -#define SENSOR_DEV_ATTR_ZONE_LOCK(ix) \ -&sensor_dev_attr_zone##ix##_auto_point1_temp_hyst.dev_attr.attr, \ -&sensor_dev_attr_zone##ix##_auto_point1_temp.dev_attr.attr, \ -&sensor_dev_attr_zone##ix##_auto_point2_temp.dev_attr.attr, \ -&sensor_dev_attr_zone##ix##_auto_point3_temp.dev_attr.attr - -#define SENSOR_DEV_ATTR_ZONE(ix) \ -SENSOR_DEV_ATTR_ZONE_LOCK(ix), \ -&sensor_dev_attr_zone##ix##_auto_channels_temp.dev_attr.attr - -#define SENSOR_DEV_ATTR_FAN_1TO4(ix) \ -&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \ -&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \ -&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \ -&sensor_dev_attr_fan##ix##_type.dev_attr.attr - -#define SENSOR_DEV_ATTR_FAN_5TO6(ix) \ -&sensor_dev_attr_fan##ix##_input.dev_attr.attr, \ -&sensor_dev_attr_fan##ix##_min.dev_attr.attr, \ -&sensor_dev_attr_fan##ix##_alarm.dev_attr.attr, \ -&sensor_dev_attr_fan##ix##_max.dev_attr.attr - -/* These attributes are read-writeable only if the chip is *not* locked */ -#define SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix) \ -&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr, \ -&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr, \ -&sensor_dev_attr_pwm##ix##_ramp_rate.dev_attr.attr, \ -&sensor_dev_attr_pwm##ix##_auto_channels_zone.dev_attr.attr, \ -&sensor_dev_attr_pwm##ix##_auto_pwm_min.dev_attr.attr, \ -&sensor_dev_attr_pwm##ix##_auto_point1_pwm.dev_attr.attr - -#define SENSOR_DEV_ATTR_PWM_1TO3(ix) \ -SENSOR_DEV_ATTR_PWM_1TO3_LOCK(ix), \ -&sensor_dev_attr_pwm##ix.dev_attr.attr, \ -&sensor_dev_attr_pwm##ix##_auto_point2_pwm.dev_attr.attr - -/* These attributes are read-writeable only if the chip is *not* locked */ -#define SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix) \ -&sensor_dev_attr_pwm##ix.dev_attr.attr, \ -&sensor_dev_attr_pwm##ix##_freq.dev_attr.attr - -#define SENSOR_DEV_ATTR_PWM_5TO6(ix) \ -SENSOR_DEV_ATTR_PWM_5TO6_LOCK(ix), \ -&sensor_dev_attr_pwm##ix##_enable.dev_attr.attr - /* This struct holds all the attributes that are always present and need to be * created unconditionally. The attributes that need modification of their * permissions are created read-only and write permissions are added or removed * on the fly when required */ static struct attribute *dme1737_attr[] ={ /* Voltages */ - SENSOR_DEV_ATTR_IN(0), - SENSOR_DEV_ATTR_IN(1), - SENSOR_DEV_ATTR_IN(2), - SENSOR_DEV_ATTR_IN(3), - SENSOR_DEV_ATTR_IN(4), - SENSOR_DEV_ATTR_IN(5), - SENSOR_DEV_ATTR_IN(6), + &sensor_dev_attr_in0_input.dev_attr.attr, + &sensor_dev_attr_in0_min.dev_attr.attr, + &sensor_dev_attr_in0_max.dev_attr.attr, + &sensor_dev_attr_in0_alarm.dev_attr.attr, + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in1_min.dev_attr.attr, + &sensor_dev_attr_in1_max.dev_attr.attr, + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in2_min.dev_attr.attr, + &sensor_dev_attr_in2_max.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in3_min.dev_attr.attr, + &sensor_dev_attr_in3_max.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in4_min.dev_attr.attr, + &sensor_dev_attr_in4_max.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in5_min.dev_attr.attr, + &sensor_dev_attr_in5_max.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in6_min.dev_attr.attr, + &sensor_dev_attr_in6_max.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, /* Temperatures */ - SENSOR_DEV_ATTR_TEMP(1), - SENSOR_DEV_ATTR_TEMP(2), - SENSOR_DEV_ATTR_TEMP(3), + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_fault.dev_attr.attr, + &sensor_dev_attr_temp1_offset.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_fault.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_fault.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, /* Zones */ - SENSOR_DEV_ATTR_ZONE(1), - SENSOR_DEV_ATTR_ZONE(2), - SENSOR_DEV_ATTR_ZONE(3), + &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr, /* Misc */ &dev_attr_vrm.attr, &dev_attr_cpu0_vid.attr, @@ -1616,23 +1600,48 @@ static const struct attribute_group dme1737_group = { * Their creation depends on the chip configuration which is determined during * module load. */ static struct attribute *dme1737_attr_pwm1[] = { - SENSOR_DEV_ATTR_PWM_1TO3(1), + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm1_freq.dev_attr.attr, + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm2[] = { - SENSOR_DEV_ATTR_PWM_1TO3(2), + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm2_freq.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm3[] = { - SENSOR_DEV_ATTR_PWM_1TO3(3), + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm3_freq.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm5[] = { - SENSOR_DEV_ATTR_PWM_5TO6(5), + &sensor_dev_attr_pwm5.dev_attr.attr, + &sensor_dev_attr_pwm5_freq.dev_attr.attr, + &sensor_dev_attr_pwm5_enable.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm6[] = { - SENSOR_DEV_ATTR_PWM_5TO6(6), + &sensor_dev_attr_pwm6.dev_attr.attr, + &sensor_dev_attr_pwm6_freq.dev_attr.attr, + &sensor_dev_attr_pwm6_enable.dev_attr.attr, NULL }; @@ -1649,27 +1658,45 @@ static const struct attribute_group dme1737_pwm_group[] = { * Their creation depends on the chip configuration which is determined during * module load. */ static struct attribute *dme1737_attr_fan1[] = { - SENSOR_DEV_ATTR_FAN_1TO4(1), + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan1_min.dev_attr.attr, + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan1_type.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_fan2[] = { - SENSOR_DEV_ATTR_FAN_1TO4(2), + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan2_min.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_type.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_fan3[] = { - SENSOR_DEV_ATTR_FAN_1TO4(3), + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan3_min.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + &sensor_dev_attr_fan3_type.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_fan4[] = { - SENSOR_DEV_ATTR_FAN_1TO4(4), + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan4_min.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + &sensor_dev_attr_fan4_type.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_fan5[] = { - SENSOR_DEV_ATTR_FAN_5TO6(5), + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan5_min.dev_attr.attr, + &sensor_dev_attr_fan5_alarm.dev_attr.attr, + &sensor_dev_attr_fan5_max.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_fan6[] = { - SENSOR_DEV_ATTR_FAN_5TO6(6), + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan6_min.dev_attr.attr, + &sensor_dev_attr_fan6_alarm.dev_attr.attr, + &sensor_dev_attr_fan6_max.dev_attr.attr, NULL }; @@ -1686,13 +1713,22 @@ static const struct attribute_group dme1737_fan_group[] = { * writeable if the chip is *not* locked. Otherwise they stay read-only. */ static struct attribute *dme1737_attr_lock[] = { /* Temperatures */ - SENSOR_DEV_ATTR_TEMP_LOCK(1), - SENSOR_DEV_ATTR_TEMP_LOCK(2), - SENSOR_DEV_ATTR_TEMP_LOCK(3), + &sensor_dev_attr_temp1_offset.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, /* Zones */ - SENSOR_DEV_ATTR_ZONE_LOCK(1), - SENSOR_DEV_ATTR_ZONE_LOCK(2), - SENSOR_DEV_ATTR_ZONE_LOCK(3), + &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, NULL }; @@ -1704,23 +1740,40 @@ static const struct attribute_group dme1737_lock_group = { * writeable if the chip is *not* locked and the respective PWM is available. * Otherwise they stay read-only. */ static struct attribute *dme1737_attr_pwm1_lock[] = { - SENSOR_DEV_ATTR_PWM_1TO3_LOCK(1), + &sensor_dev_attr_pwm1_freq.dev_attr.attr, + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm2_lock[] = { - SENSOR_DEV_ATTR_PWM_1TO3_LOCK(2), + &sensor_dev_attr_pwm2_freq.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm3_lock[] = { - SENSOR_DEV_ATTR_PWM_1TO3_LOCK(3), + &sensor_dev_attr_pwm3_freq.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm5_lock[] = { - SENSOR_DEV_ATTR_PWM_5TO6_LOCK(5), + &sensor_dev_attr_pwm5.dev_attr.attr, + &sensor_dev_attr_pwm5_freq.dev_attr.attr, NULL }; static struct attribute *dme1737_attr_pwm6_lock[] = { - SENSOR_DEV_ATTR_PWM_5TO6_LOCK(6), + &sensor_dev_attr_pwm6.dev_attr.attr, + &sensor_dev_attr_pwm6_freq.dev_attr.attr, NULL }; -- GitLab From 92430b6feb19aba043171ff3094535b598052901 Mon Sep 17 00:00:00 2001 From: Juerg Haefliger Date: Thu, 3 Apr 2008 21:34:19 -0700 Subject: [PATCH 0502/1024] hwmon: (dme1737) probe all addresses This patch adds a module load parameter to enable probing of non-standard LPC addresses 0x162e and 0x164e when scanning for supported ISA chips. Signed-Off-By: Juerg Haefliger Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- Documentation/hwmon/dme1737 | 4 ++++ drivers/hwmon/dme1737.c | 10 +++++++++- 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737 index 8f446070e64..b1fe0099943 100644 --- a/Documentation/hwmon/dme1737 +++ b/Documentation/hwmon/dme1737 @@ -22,6 +22,10 @@ Module Parameters and PWM output control functions. Using this parameter shouldn't be required since the BIOS usually takes care of this. +* probe_all_addr: bool Include non-standard LPC addresses 0x162e and 0x164e + when probing for ISA devices. This is required for the + following boards: + - VIA EPIA SN18000 Note that there is no need to use this parameter if the driver loads without complaining. The driver will say so if it is necessary. diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index c24b5b370da..5a3d41fbdb3 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -48,6 +48,11 @@ static unsigned short force_id; module_param(force_id, ushort, 0); MODULE_PARM_DESC(force_id, "Override the detected device ID"); +static int probe_all_addr; +module_param(probe_all_addr, bool, 0); +MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC " + "addresses"); + /* Addresses to scan */ static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END}; @@ -2430,7 +2435,10 @@ static int __init dme1737_init(void) } if (dme1737_isa_detect(0x2e, &addr) && - dme1737_isa_detect(0x4e, &addr)) { + dme1737_isa_detect(0x4e, &addr) && + (!probe_all_addr || + (dme1737_isa_detect(0x162e, &addr) && + dme1737_isa_detect(0x164e, &addr)))) { /* Return 0 if we didn't find an ISA device */ return 0; } -- GitLab From f994fb23d3c63dffc8127f227f3e0c530e3e4fd6 Mon Sep 17 00:00:00 2001 From: Juerg Haefliger Date: Tue, 25 Mar 2008 21:49:15 -0700 Subject: [PATCH 0503/1024] hwmon: (dme1737) fix voltage scaling This patch fixes a voltage scaling issue for the sch311x device. Signed-Off-By: Juerg Haefliger Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- drivers/hwmon/dme1737.c | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-) diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 5a3d41fbdb3..5e2cf0aef48 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -181,6 +181,7 @@ struct dme1737_data { int valid; /* !=0 if following fields are valid */ unsigned long last_update; /* in jiffies */ unsigned long last_vbat; /* in jiffies */ + enum chips type; u8 vid; u8 pwm_rr_en; @@ -215,20 +216,27 @@ struct dme1737_data { }; /* Nominal voltage values */ -static const int IN_NOMINAL[] = {5000, 2250, 3300, 5000, 12000, 3300, 3300}; +static const int IN_NOMINAL_DME1737[] = {5000, 2250, 3300, 5000, 12000, 3300, + 3300}; +static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300, + 3300}; +#define IN_NOMINAL(ix, type) (((type) == dme1737) ? \ + IN_NOMINAL_DME1737[(ix)] : \ + IN_NOMINAL_SCH311x[(ix)]) /* Voltage input * Voltage inputs have 16 bits resolution, limit values have 8 bits * resolution. */ -static inline int IN_FROM_REG(int reg, int ix, int res) +static inline int IN_FROM_REG(int reg, int ix, int res, int type) { - return (reg * IN_NOMINAL[ix] + (3 << (res - 3))) / (3 << (res - 2)); + return (reg * IN_NOMINAL(ix, type) + (3 << (res - 3))) / + (3 << (res - 2)); } -static inline int IN_TO_REG(int val, int ix) +static inline int IN_TO_REG(int val, int ix, int type) { - return SENSORS_LIMIT((val * 192 + IN_NOMINAL[ix] / 2) / - IN_NOMINAL[ix], 0, 255); + return SENSORS_LIMIT((val * 192 + IN_NOMINAL(ix, type) / 2) / + IN_NOMINAL(ix, type), 0, 255); } /* Temperature input @@ -727,13 +735,13 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr, switch (fn) { case SYS_IN_INPUT: - res = IN_FROM_REG(data->in[ix], ix, 16); + res = IN_FROM_REG(data->in[ix], ix, 16, data->type); break; case SYS_IN_MIN: - res = IN_FROM_REG(data->in_min[ix], ix, 8); + res = IN_FROM_REG(data->in_min[ix], ix, 8, data->type); break; case SYS_IN_MAX: - res = IN_FROM_REG(data->in_max[ix], ix, 8); + res = IN_FROM_REG(data->in_max[ix], ix, 8, data->type); break; case SYS_IN_ALARM: res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01; @@ -760,12 +768,12 @@ static ssize_t set_in(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); switch (fn) { case SYS_IN_MIN: - data->in_min[ix] = IN_TO_REG(val, ix); + data->in_min[ix] = IN_TO_REG(val, ix, data->type); dme1737_write(client, DME1737_REG_IN_MIN(ix), data->in_min[ix]); break; case SYS_IN_MAX: - data->in_max[ix] = IN_TO_REG(val, ix); + data->in_max[ix] = IN_TO_REG(val, ix, data->type); dme1737_write(client, DME1737_REG_IN_MAX(ix), data->in_max[ix]); break; @@ -2167,6 +2175,7 @@ static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address, kind = dme1737; name = "dme1737"; + data->type = kind; /* Fill in the remaining client fields and put it into the global * list */ @@ -2359,6 +2368,7 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev) err = -ENODEV; goto exit_kfree; } + data->type = -1; /* Fill in the remaining client fields and initialize the mutex */ strlcpy(client->name, "sch311x", I2C_NAME_SIZE); -- GitLab From 9d3e19afd35907bf58b205096cd33e97df8fb6a5 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 26 Apr 2008 16:28:27 +0200 Subject: [PATCH 0504/1024] hwmon: (adt7473) Remove unused defines All the *_MAX_ADDR defines are never used, so remove them. The number of registers of each type is already expressed by the *_COUNT defines. Signed-off-by: Jean Delvare Acked-by: Darrick J. Wong Signed-off-by: Mark M. Hoffman --- drivers/hwmon/adt7473.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index 93dbf5e7ff8..7ecebfd404e 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -39,32 +39,20 @@ I2C_CLIENT_INSMOD_1(adt7473); #define ADT7473_REG_BASE_ADDR 0x20 #define ADT7473_REG_VOLT_BASE_ADDR 0x21 -#define ADT7473_REG_VOLT_MAX_ADDR 0x22 #define ADT7473_REG_VOLT_MIN_BASE_ADDR 0x46 -#define ADT7473_REG_VOLT_MIN_MAX_ADDR 0x49 #define ADT7473_REG_TEMP_BASE_ADDR 0x25 -#define ADT7473_REG_TEMP_MAX_ADDR 0x27 #define ADT7473_REG_TEMP_LIMITS_BASE_ADDR 0x4E -#define ADT7473_REG_TEMP_LIMITS_MAX_ADDR 0x53 #define ADT7473_REG_TEMP_TMIN_BASE_ADDR 0x67 -#define ADT7473_REG_TEMP_TMIN_MAX_ADDR 0x69 #define ADT7473_REG_TEMP_TMAX_BASE_ADDR 0x6A -#define ADT7473_REG_TEMP_TMAX_MAX_ADDR 0x6C #define ADT7473_REG_FAN_BASE_ADDR 0x28 -#define ADT7473_REG_FAN_MAX_ADDR 0x2F #define ADT7473_REG_FAN_MIN_BASE_ADDR 0x54 -#define ADT7473_REG_FAN_MIN_MAX_ADDR 0x5B #define ADT7473_REG_PWM_BASE_ADDR 0x30 -#define ADT7473_REG_PWM_MAX_ADDR 0x32 #define ADT7473_REG_PWM_MIN_BASE_ADDR 0x64 -#define ADT7473_REG_PWM_MIN_MAX_ADDR 0x66 #define ADT7473_REG_PWM_MAX_BASE_ADDR 0x38 -#define ADT7473_REG_PWM_MAX_MAX_ADDR 0x3A #define ADT7473_REG_PWM_BHVR_BASE_ADDR 0x5C -#define ADT7473_REG_PWM_BHVR_MAX_ADDR 0x5E #define ADT7473_PWM_BHVR_MASK 0xE0 #define ADT7473_PWM_BHVR_SHIFT 5 @@ -102,7 +90,6 @@ I2C_CLIENT_INSMOD_1(adt7473); #define ADT7473_FAN4_ALARM 0x20 #define ADT7473_R1T_SHORT 0x40 #define ADT7473_R2T_SHORT 0x80 -#define ADT7473_REG_MAX_ADDR 0x80 #define ALARM2(x) ((x) << 8) -- GitLab From 321c4138573da888ca30a387e9973f690c217e9e Mon Sep 17 00:00:00 2001 From: "Mark M. Hoffman" Date: Mon, 26 May 2008 15:09:36 -0400 Subject: [PATCH 0505/1024] hwmon: (adt7473) clarify an awkward bit of code Signed-off-by: Mark M. Hoffman Acked-by: Jean Delvare --- drivers/hwmon/adt7473.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index 7ecebfd404e..0cd6c720a85 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -559,10 +559,9 @@ static ssize_t set_max_duty_at_crit(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct adt7473_data *data = i2c_get_clientdata(client); int temp = simple_strtol(buf, NULL, 10); - temp = temp && 0xFF; mutex_lock(&data->lock); - data->max_duty_at_overheat = temp; + data->max_duty_at_overheat = !!temp; reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4); if (temp) reg |= ADT7473_CFG4_MAX_DUTY_AT_OVT; -- GitLab From 01a52397e95a8532c59506691759dba9262d6be7 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 21 Apr 2008 12:10:53 -0700 Subject: [PATCH 0506/1024] hwmon: (lm75) cleanup/reorg Minor cleanup and reorg of the lm75 code. - Kconfig provides a larger list of lm75-compatible chips - A top comment now says what the driver does (!) ... as in, just what sort of sensor is this?? - Section comments now delineate the various sections of the driver: hwmon attributes, driver binding, register access, module glue. One driver binding function moved out of the attribute section, as did the driver struct itself. - Minor tweaks to legacy probe logic: correct a comment, and remove a pointless variable. - Whitespace, linelength, and comment fixes. This patch should include no functional changes. It's preparation for adding new-style (driver model) I2C driver binding. Signed-off-by: David Brownell Acked-by: Jean Delvare Acked-by: Laurent Pinchart Signed-off-by: Mark M. Hoffman --- drivers/hwmon/Kconfig | 20 ++++++---- drivers/hwmon/lm75.c | 90 ++++++++++++++++++++++++------------------- 2 files changed, 64 insertions(+), 46 deletions(-) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 00ff5334849..86289c283dc 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -394,13 +394,19 @@ config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on I2C help - If you say yes here you get support for National Semiconductor LM75 - sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in - 9-bit precision mode), and TelCom (now Microchip) TCN75. - - The DS75 and DS1775 in 10- to 12-bit precision modes will require - a force module parameter. The driver will not handle the extra - precision anyhow. + If you say yes here you get support for one common type of + temperature sensor chip, with models including: + + - Dallas Semiconductor DS75 and DS1775 + - Maxim MAX6625 and MAX6626 + - Microchip MCP980x + - National Semiconductor LM75 + - NXP's LM75A + - ST Microelectronics STDS75 + - TelCom (now Microchip) TCN75 + - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275 + + Most of these chips will require a "force" module parameter. This driver can also be built as a module. If so, the module will be called lm75. diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index de698dc7302..25ed2658410 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -30,14 +30,19 @@ #include "lm75.h" -/* Addresses to scan */ +/* + * This driver handles the LM75 and compatible digital temperature sensors. + * Compatibles include at least the DS75, DS1775, MCP980x, STDS75, TCN75, + * TMP100, TMP101, TMP75, TMP175, and TMP275. + */ + +/* Addresses scanned by legacy style driver binding */ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; -/* Insmod parameters */ +/* Insmod parameters (only for legacy style driver binding) */ I2C_CLIENT_INSMOD_1(lm75); -/* Many LM75 constants specified below */ /* The LM75 registers */ #define LM75_REG_CONF 0x01 @@ -50,9 +55,9 @@ static const u8 LM75_REG_TEMP[3] = { /* Each client has this additional data */ struct lm75_data { struct i2c_client client; - struct device *hwmon_dev; + struct device *hwmon_dev; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + char valid; /* !=0 if registers are valid */ unsigned long last_updated; /* In jiffies */ u16 temp[3]; /* Register values, 0 = input @@ -60,23 +65,15 @@ struct lm75_data { 2 = hyst */ }; -static int lm75_attach_adapter(struct i2c_adapter *adapter); -static int lm75_detect(struct i2c_adapter *adapter, int address, int kind); static void lm75_init_client(struct i2c_client *client); -static int lm75_detach_client(struct i2c_client *client); static int lm75_read_value(struct i2c_client *client, u8 reg); static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value); static struct lm75_data *lm75_update_device(struct device *dev); -/* This is the driver that will be inserted */ -static struct i2c_driver lm75_driver = { - .driver = { - .name = "lm75", - }, - .attach_adapter = lm75_attach_adapter, - .detach_client = lm75_detach_client, -}; +/*-----------------------------------------------------------------------*/ + +/* sysfs attributes for hwmon */ static ssize_t show_temp(struct device *dev, struct device_attribute *da, char *buf) @@ -109,13 +106,6 @@ static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp, set_temp, 2); static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); -static int lm75_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm75_detect); -} - static struct attribute *lm75_attributes[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, @@ -128,6 +118,12 @@ static const struct attribute_group lm75_group = { .attrs = lm75_attributes, }; +/*-----------------------------------------------------------------------*/ + +/* "Legacy" I2C driver binding */ + +static struct i2c_driver lm75_driver; + /* This function is called by i2c_probe */ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) { @@ -135,15 +131,14 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) struct i2c_client *new_client; struct lm75_data *data; int err = 0; - const char *name = ""; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) goto exit; - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm75_{read,write}_value. */ + /* OK. For now, we presume we have a valid address. We create the + client structure, even though there may be no sensor present. + But it allows us to use i2c_smbus_read_*_data() calls. */ if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; @@ -174,17 +169,17 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) || i2c_smbus_read_word_data(new_client, 5) != hyst || i2c_smbus_read_word_data(new_client, 6) != hyst || i2c_smbus_read_word_data(new_client, 7) != hyst) - goto exit_free; + goto exit_free; os = i2c_smbus_read_word_data(new_client, 3); if (i2c_smbus_read_word_data(new_client, 4) != os || i2c_smbus_read_word_data(new_client, 5) != os || i2c_smbus_read_word_data(new_client, 6) != os || i2c_smbus_read_word_data(new_client, 7) != os) - goto exit_free; + goto exit_free; /* Unused bits */ if (conf & 0xe0) - goto exit_free; + goto exit_free; /* Addresses cycling */ for (i = 8; i < 0xff; i += 8) @@ -194,16 +189,10 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) goto exit_free; } - /* Determine the chip type - only one kind supported! */ - if (kind <= 0) - kind = lm75; - - if (kind == lm75) { - name = "lm75"; - } + /* NOTE: we treat "force=..." and "force_lm75=..." the same. */ + strlcpy(new_client->name, "lm75", I2C_NAME_SIZE); /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); data->valid = 0; mutex_init(&data->update_lock); @@ -213,7 +202,7 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) /* Initialize the LM75 chip */ lm75_init_client(new_client); - + /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm75_group))) goto exit_detach; @@ -236,6 +225,13 @@ exit: return err; } +static int lm75_attach_adapter(struct i2c_adapter *adapter) +{ + if (!(adapter->class & I2C_CLASS_HWMON)) + return 0; + return i2c_probe(adapter, &addr_data, lm75_detect); +} + static int lm75_detach_client(struct i2c_client *client) { struct lm75_data *data = i2c_get_clientdata(client); @@ -246,6 +242,18 @@ static int lm75_detach_client(struct i2c_client *client) return 0; } +static struct i2c_driver lm75_driver = { + .driver = { + .name = "lm75", + }, + .attach_adapter = lm75_attach_adapter, + .detach_client = lm75_detach_client, +}; + +/*-----------------------------------------------------------------------*/ + +/* register access */ + /* All registers are word-sized, except for the configuration register. LM75 uses a high-byte first convention, which is exactly opposite to the SMBus standard. */ @@ -309,6 +317,10 @@ static struct lm75_data *lm75_update_device(struct device *dev) return data; } +/*-----------------------------------------------------------------------*/ + +/* module glue */ + static int __init sensors_lm75_init(void) { return i2c_add_driver(&lm75_driver); -- GitLab From 9ebd3d822efeca2e73565516a80373c76ce3fa12 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 3 May 2008 19:33:15 -0700 Subject: [PATCH 0507/1024] hwmon: (lm75) add new-style driver binding More LM75 updates: - Teach the LM75 driver to use new-style driver binding: * Create a second driver struct, using new-style driver binding methods cribbed from the legacy code. * Add a MODULE_DEVICE_TABLE (for "newER-style binding") * The legacy probe logic delegates its work to this new code. * The legacy driver now uses the name "lm75_legacy". - More careful initialization. Chips are put into 9-bit mode so the current interconversion routines will never fail. - Save the original chip configuration, and restore it on exit. (Among other things, this normally turns off the mode where the chip is constantly sampling ... and thus saves power.) So the new-style code should catch all chips that boards declare, while the legacy code catches others. This particular coexistence strategy may need some work yet ... legacy modes might best be set up explicitly by some tool not unlike "sensors-detect". (Or else completely eradicated...) Signed-off-by: David Brownell Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- drivers/hwmon/Kconfig | 7 +- drivers/hwmon/lm75.c | 206 ++++++++++++++++++++++++++++++++---------- 2 files changed, 165 insertions(+), 48 deletions(-) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 86289c283dc..c882fd05cf2 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -406,7 +406,12 @@ config SENSORS_LM75 - TelCom (now Microchip) TCN75 - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275 - Most of these chips will require a "force" module parameter. + This driver supports driver model based binding through board + specific I2C device tables. + + It also supports the "legacy" style of driver binding. To use + that with some chips which don't replicate LM75 quirks exactly, + you may need the "force" module parameter. This driver can also be built as a module. If so, the module will be called lm75. diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 25ed2658410..7880c273c2c 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -32,10 +32,28 @@ /* * This driver handles the LM75 and compatible digital temperature sensors. - * Compatibles include at least the DS75, DS1775, MCP980x, STDS75, TCN75, - * TMP100, TMP101, TMP75, TMP175, and TMP275. + * Only types which are _not_ listed in I2C_CLIENT_INSMOD_*() need to be + * listed here. We start at 9 since I2C_CLIENT_INSMOD_*() currently allow + * definition of up to 8 chip types (plus zero). */ +enum lm75_type { /* keep sorted in alphabetical order */ + ds1775 = 9, + ds75, + /* lm75 -- in I2C_CLIENT_INSMOD_1() */ + lm75a, + max6625, + max6626, + mcp980x, + stds75, + tcn75, + tmp100, + tmp101, + tmp175, + tmp275, + tmp75, +}; + /* Addresses scanned by legacy style driver binding */ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; @@ -54,9 +72,10 @@ static const u8 LM75_REG_TEMP[3] = { /* Each client has this additional data */ struct lm75_data { - struct i2c_client client; + struct i2c_client *client; struct device *hwmon_dev; struct mutex update_lock; + u8 orig_conf; char valid; /* !=0 if registers are valid */ unsigned long last_updated; /* In jiffies */ u16 temp[3]; /* Register values, @@ -65,7 +84,6 @@ struct lm75_data { 2 = hyst */ }; -static void lm75_init_client(struct i2c_client *client); static int lm75_read_value(struct i2c_client *client, u8 reg); static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value); static struct lm75_data *lm75_update_device(struct device *dev); @@ -120,16 +138,124 @@ static const struct attribute_group lm75_group = { /*-----------------------------------------------------------------------*/ +/* "New style" I2C driver binding -- following the driver model */ + +static int +lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct lm75_data *data; + int status; + u8 set_mask, clr_mask; + int new; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) + return -EIO; + + data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + + data->client = client; + mutex_init(&data->update_lock); + + /* Set to LM75 resolution (9 bits, 1/2 degree C) and range. + * Then tweak to be more precise when appropriate. + */ + set_mask = 0; + clr_mask = (1 << 0) /* continuous conversions */ + | (1 << 6) | (1 << 5); /* 9-bit mode */ + + /* configure as specified */ + status = lm75_read_value(client, LM75_REG_CONF); + if (status < 0) { + dev_dbg(&client->dev, "Can't read config? %d\n", status); + goto exit_free; + } + data->orig_conf = status; + new = status & ~clr_mask; + new |= set_mask; + if (status != new) + lm75_write_value(client, LM75_REG_CONF, new); + dev_dbg(&client->dev, "Config %02x\n", new); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &lm75_group); + if (status) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: sensor '%s'\n", + data->hwmon_dev->bus_id, client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &lm75_group); +exit_free: + i2c_set_clientdata(client, NULL); + kfree(data); + return status; +} + +static int lm75_remove(struct i2c_client *client) +{ + struct lm75_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &lm75_group); + lm75_write_value(client, LM75_REG_CONF, data->orig_conf); + i2c_set_clientdata(client, NULL); + kfree(data); + return 0; +} + +static const struct i2c_device_id lm75_ids[] = { + { "ds1775", ds1775, }, + { "ds75", ds75, }, + { "lm75", lm75, }, + { "lm75a", lm75a, }, + { "max6625", max6625, }, + { "max6626", max6626, }, + { "mcp980x", mcp980x, }, + { "stds75", stds75, }, + { "tcn75", tcn75, }, + { "tmp100", tmp100, }, + { "tmp101", tmp101, }, + { "tmp175", tmp175, }, + { "tmp275", tmp275, }, + { "tmp75", tmp75, }, + { /* LIST END */ } +}; +MODULE_DEVICE_TABLE(i2c, lm75_ids); + +static struct i2c_driver lm75_driver = { + .driver = { + .name = "lm75", + }, + .probe = lm75_probe, + .remove = lm75_remove, + .id_table = lm75_ids, +}; + +/*-----------------------------------------------------------------------*/ + /* "Legacy" I2C driver binding */ -static struct i2c_driver lm75_driver; +static struct i2c_driver lm75_legacy_driver; /* This function is called by i2c_probe */ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) { int i; struct i2c_client *new_client; - struct lm75_data *data; int err = 0; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | @@ -139,16 +265,15 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) /* OK. For now, we presume we have a valid address. We create the client structure, even though there may be no sensor present. But it allows us to use i2c_smbus_read_*_data() calls. */ - if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) { + new_client = kzalloc(sizeof *new_client, GFP_KERNEL); + if (!new_client) { err = -ENOMEM; goto exit; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); new_client->addr = address; new_client->adapter = adapter; - new_client->driver = &lm75_driver; + new_client->driver = &lm75_legacy_driver; new_client->flags = 0; /* Now, we do the remaining detection. There is no identification- @@ -189,38 +314,26 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind) goto exit_free; } - /* NOTE: we treat "force=..." and "force_lm75=..." the same. */ + /* NOTE: we treat "force=..." and "force_lm75=..." the same. + * Only new-style driver binding distinguishes chip types. + */ strlcpy(new_client->name, "lm75", I2C_NAME_SIZE); - /* Fill in the remaining client fields and put it into the global list */ - data->valid = 0; - mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + err = i2c_attach_client(new_client); + if (err) goto exit_free; - /* Initialize the LM75 chip */ - lm75_init_client(new_client); - - /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &lm75_group))) + err = lm75_probe(new_client, NULL); + if (err < 0) goto exit_detach; - data->hwmon_dev = hwmon_device_register(&new_client->dev); - if (IS_ERR(data->hwmon_dev)) { - err = PTR_ERR(data->hwmon_dev); - goto exit_remove; - } - return 0; -exit_remove: - sysfs_remove_group(&new_client->dev.kobj, &lm75_group); exit_detach: i2c_detach_client(new_client); exit_free: - kfree(data); + kfree(new_client); exit: return err; } @@ -234,17 +347,15 @@ static int lm75_attach_adapter(struct i2c_adapter *adapter) static int lm75_detach_client(struct i2c_client *client) { - struct lm75_data *data = i2c_get_clientdata(client); - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &lm75_group); + lm75_remove(client); i2c_detach_client(client); - kfree(data); + kfree(client); return 0; } -static struct i2c_driver lm75_driver = { +static struct i2c_driver lm75_legacy_driver = { .driver = { - .name = "lm75", + .name = "lm75_legacy", }, .attach_adapter = lm75_attach_adapter, .detach_client = lm75_detach_client, @@ -276,16 +387,6 @@ static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) return i2c_smbus_write_word_data(client, reg, swab16(value)); } -static void lm75_init_client(struct i2c_client *client) -{ - int reg; - - /* Enable if in shutdown mode */ - reg = lm75_read_value(client, LM75_REG_CONF); - if (reg >= 0 && (reg & 0x01)) - lm75_write_value(client, LM75_REG_CONF, reg & 0xfe); -} - static struct lm75_data *lm75_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -323,11 +424,22 @@ static struct lm75_data *lm75_update_device(struct device *dev) static int __init sensors_lm75_init(void) { - return i2c_add_driver(&lm75_driver); + int status; + + status = i2c_add_driver(&lm75_driver); + if (status < 0) + return status; + + status = i2c_add_driver(&lm75_legacy_driver); + if (status < 0) + i2c_del_driver(&lm75_driver); + + return status; } static void __exit sensors_lm75_exit(void) { + i2c_del_driver(&lm75_legacy_driver); i2c_del_driver(&lm75_driver); } -- GitLab From 1f44809ac3d7a3fc977684dc3a95fa221f33fc15 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 29 Apr 2008 14:03:37 +0200 Subject: [PATCH 0508/1024] hwmon: (lm85) Coding-style cleanups Fix most style issues reported by checkpatch, including: * Trailing, missing and extra whitespace * Extra parentheses, curly braces and semi-colons * Broken indentation * Lines too long I verified that the generated code is the same before and after these changes. Signed-off-by: Jean Delvare Acked-by: Juerg Haefliger Signed-off-by: Mark M. Hoffman --- drivers/hwmon/lm85.c | 505 ++++++++++++++++++++++--------------------- 1 file changed, 255 insertions(+), 250 deletions(-) diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index ee5eca1c192..0c0fede8dde 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -1,7 +1,7 @@ /* lm85.c - Part of lm_sensors, Linux kernel modules for hardware monitoring - Copyright (c) 1998, 1999 Frodo Looijaard + Copyright (c) 1998, 1999 Frodo Looijaard Copyright (c) 2002, 2003 Philip Pokorny Copyright (c) 2003 Margit Schubert-While Copyright (c) 2004 Justin Thiessen @@ -51,8 +51,8 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_REG_TEMP_MAX(nr) (0x4f + (nr) * 2) /* Fan speeds are LSB, MSB (2 bytes) */ -#define LM85_REG_FAN(nr) (0x28 + (nr) *2) -#define LM85_REG_FAN_MIN(nr) (0x54 + (nr) *2) +#define LM85_REG_FAN(nr) (0x28 + (nr) * 2) +#define LM85_REG_FAN_MIN(nr) (0x54 + (nr) * 2) #define LM85_REG_PWM(nr) (0x30 + (nr)) @@ -68,7 +68,7 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_DEVICE_ADX 0x27 #define LM85_COMPANY_NATIONAL 0x01 #define LM85_COMPANY_ANALOG_DEV 0x41 -#define LM85_COMPANY_SMSC 0x5c +#define LM85_COMPANY_SMSC 0x5c #define LM85_VERSTEP_VMASK 0xf0 #define LM85_VERSTEP_GENERIC 0x60 #define LM85_VERSTEP_LM85C 0x60 @@ -115,34 +115,34 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define EMC6D100_REG_ALARM3 0x7d /* IN5, IN6 and IN7 */ -#define EMC6D100_REG_IN(nr) (0x70 + ((nr)-5)) -#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr)-5) * 2) -#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr)-5) * 2) +#define EMC6D100_REG_IN(nr) (0x70 + ((nr) - 5)) +#define EMC6D100_REG_IN_MIN(nr) (0x73 + ((nr) - 5) * 2) +#define EMC6D100_REG_IN_MAX(nr) (0x74 + ((nr) - 5) * 2) #define EMC6D102_REG_EXTEND_ADC1 0x85 #define EMC6D102_REG_EXTEND_ADC2 0x86 #define EMC6D102_REG_EXTEND_ADC3 0x87 #define EMC6D102_REG_EXTEND_ADC4 0x88 -/* Conversions. Rounding and limit checking is only done on the TO_REG +/* Conversions. Rounding and limit checking is only done on the TO_REG variants. Note that you should be a bit careful with which arguments these macros are called: arguments may be evaluated more than once. */ /* IN are scaled acording to built-in resistors */ static int lm85_scaling[] = { /* .001 Volts */ - 2500, 2250, 3300, 5000, 12000, - 3300, 1500, 1800 /*EMC6D100*/ - }; -#define SCALE(val,from,to) (((val)*(to) + ((from)/2))/(from)) + 2500, 2250, 3300, 5000, 12000, + 3300, 1500, 1800 /*EMC6D100*/ +}; +#define SCALE(val, from, to) (((val) * (to) + ((from) / 2)) / (from)) -#define INS_TO_REG(n,val) \ - SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255) +#define INS_TO_REG(n, val) \ + SENSORS_LIMIT(SCALE(val, lm85_scaling[n], 192), 0, 255) -#define INSEXT_FROM_REG(n,val,ext) \ +#define INSEXT_FROM_REG(n, val, ext) \ SCALE(((val) << 4) + (ext), 192 << 4, lm85_scaling[n]) -#define INS_FROM_REG(n,val) SCALE((val), 192, lm85_scaling[n]) +#define INS_FROM_REG(n, val) SCALE((val), 192, lm85_scaling[n]) /* FAN speed is measured using 90kHz clock */ static inline u16 FAN_TO_REG(unsigned long val) @@ -151,16 +151,17 @@ static inline u16 FAN_TO_REG(unsigned long val) return 0xffff; return SENSORS_LIMIT(5400000 / val, 1, 0xfffe); } -#define FAN_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:5400000/(val)) +#define FAN_FROM_REG(val) ((val) == 0 ? -1 : (val) == 0xffff ? 0 : \ + 5400000 / (val)) /* Temperature is reported in .001 degC increments */ #define TEMP_TO_REG(val) \ - SENSORS_LIMIT(SCALE(val,1000,1),-127,127) -#define TEMPEXT_FROM_REG(val,ext) \ + SENSORS_LIMIT(SCALE(val, 1000, 1), -127, 127) +#define TEMPEXT_FROM_REG(val, ext) \ SCALE(((val) << 4) + (ext), 16, 1000) #define TEMP_FROM_REG(val) ((val) * 1000) -#define PWM_TO_REG(val) (SENSORS_LIMIT(val,0,255)) +#define PWM_TO_REG(val) SENSORS_LIMIT(val, 0, 255) #define PWM_FROM_REG(val) (val) @@ -183,17 +184,17 @@ static inline u16 FAN_TO_REG(unsigned long val) */ /* These are the zone temperature range encodings in .001 degree C */ -static int lm85_range_map[] = { - 2000, 2500, 3300, 4000, 5000, 6600, - 8000, 10000, 13300, 16000, 20000, 26600, - 32000, 40000, 53300, 80000 - }; -static int RANGE_TO_REG( int range ) +static int lm85_range_map[] = { + 2000, 2500, 3300, 4000, 5000, 6600, 8000, 10000, + 13300, 16000, 20000, 26600, 32000, 40000, 53300, 80000 +}; + +static int RANGE_TO_REG(int range) { int i; if (range >= lm85_range_map[15]) - return 15 ; + return 15; /* Find the closest match */ for (i = 14; i >= 0; --i) { @@ -207,7 +208,7 @@ static int RANGE_TO_REG( int range ) return 0; } -#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f]) +#define RANGE_FROM_REG(val) lm85_range_map[(val) & 0x0f] /* These are the Acoustic Enhancement, or Temperature smoothing encodings * NOTE: The enable/disable bit is INCLUDED in these encodings as the @@ -216,19 +217,21 @@ static int RANGE_TO_REG( int range ) */ /* These are the PWM frequency encodings */ static int lm85_freq_map[] = { /* .1 Hz */ - 100, 150, 230, 300, 380, 470, 620, 940 - }; -static int FREQ_TO_REG( int freq ) + 100, 150, 230, 300, 380, 470, 620, 940 +}; + +static int FREQ_TO_REG(int freq) { int i; - if( freq >= lm85_freq_map[7] ) { return 7 ; } - for( i = 0 ; i < 7 ; ++i ) - if( freq <= lm85_freq_map[i] ) - break ; - return( i & 0x07 ); + if (freq >= lm85_freq_map[7]) + return 7; + for (i = 0; i < 7; ++i) + if (freq <= lm85_freq_map[i]) + break; + return i & 0x07; } -#define FREQ_FROM_REG(val) (lm85_freq_map[(val)&0x07]) +#define FREQ_FROM_REG(val) lm85_freq_map[(val) & 0x07] /* Since we can't use strings, I'm abusing these numbers * to stand in for the following meanings: @@ -243,29 +246,29 @@ static int FREQ_TO_REG( int freq ) */ static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 }; -#define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07]) +#define ZONE_FROM_REG(val) lm85_zone_map[((val) >> 5) & 0x07] -static int ZONE_TO_REG( int zone ) +static int ZONE_TO_REG(int zone) { int i; - for( i = 0 ; i <= 7 ; ++i ) - if( zone == lm85_zone_map[i] ) - break ; - if( i > 7 ) /* Not found. */ + for (i = 0; i <= 7; ++i) + if (zone == lm85_zone_map[i]) + break; + if (i > 7) /* Not found. */ i = 3; /* Always 100% */ - return( (i & 0x07)<<5 ); + return (i & 0x07) << 5; } -#define HYST_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,0,15)) -#define HYST_FROM_REG(val) ((val)*1000) +#define HYST_TO_REG(val) SENSORS_LIMIT(((val) + 500) / 1000, 0, 15) +#define HYST_FROM_REG(val) ((val) * 1000) -#define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127)) -#define OFFSET_FROM_REG(val) ((val)*25) +#define OFFSET_TO_REG(val) SENSORS_LIMIT((val) / 25, -127, 127) +#define OFFSET_FROM_REG(val) ((val) * 25) -#define PPR_MASK(fan) (0x03<<(fan *2)) -#define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2)) -#define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1) +#define PPR_MASK(fan) (0x03 << ((fan) * 2)) +#define PPR_TO_REG(val, fan) (SENSORS_LIMIT((val) - 1, 0, 3) << ((fan) * 2)) +#define PPR_FROM_REG(val, fan) ((((val) >> ((fan) * 2)) & 0x03) + 1) /* Chip sampling rates * @@ -292,11 +295,11 @@ struct lm85_zone { u8 hyst; /* Low limit hysteresis. (0-15) */ u8 range; /* Temp range, encoded */ s8 critical; /* "All fans ON" temp limit */ - u8 off_desired; /* Actual "off" temperature specified. Preserved + u8 off_desired; /* Actual "off" temperature specified. Preserved * to prevent "drift" as other autofan control * values change. */ - u8 max_desired; /* Actual "max" temperature specified. Preserved + u8 max_desired; /* Actual "max" temperature specified. Preserved * to prevent "drift" as other autofan control * values change. */ @@ -375,7 +378,7 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) ); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr])); } static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, @@ -383,7 +386,7 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) ); + return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr])); } static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, @@ -414,7 +417,8 @@ show_fan_offset(4); /* vid, vrm, alarms */ -static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, + char *buf) { struct lm85_data *data = lm85_update_device(dev); int vid; @@ -432,13 +436,15 @@ static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, c static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); -static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, + char *buf) { struct lm85_data *data = dev_get_drvdata(dev); return sprintf(buf, "%ld\n", (long) data->vrm); } -static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct lm85_data *data = dev_get_drvdata(dev); data->vrm = simple_strtoul(buf, NULL, 10); @@ -447,7 +453,8 @@ static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); -static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_alarms_reg(struct device *dev, struct device_attribute + *attr, char *buf) { struct lm85_data *data = lm85_update_device(dev); return sprintf(buf, "%u\n", data->alarms); @@ -488,7 +495,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) ); + return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr])); } static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, @@ -581,17 +588,16 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf( buf, "%d\n", INSEXT_FROM_REG(nr, - data->in[nr], - data->in_ext[nr])); + return sprintf(buf, "%d\n", INSEXT_FROM_REG(nr, data->in[nr], + data->in_ext[nr])); } -static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, +static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, char *buf) { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) ); + return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_min[nr])); } static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, @@ -614,7 +620,7 @@ static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) ); + return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_max[nr])); } static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, @@ -656,8 +662,8 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr], - data->temp_ext[nr])); + return sprintf(buf, "%d\n", TEMPEXT_FROM_REG(data->temp[nr], + data->temp_ext[nr])); } static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, @@ -665,7 +671,7 @@ static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) ); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr])); } static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, @@ -688,7 +694,7 @@ static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) ); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr])); } static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, @@ -697,7 +703,7 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); + long val = simple_strtol(buf, NULL, 10); mutex_lock(&data->update_lock); data->temp_max[nr] = TEMP_TO_REG(val); @@ -726,7 +732,7 @@ static ssize_t show_pwm_auto_channels(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config)); + return sprintf(buf, "%d\n", ZONE_FROM_REG(data->autofan[nr].config)); } static ssize_t set_pwm_auto_channels(struct device *dev, @@ -735,11 +741,11 @@ static ssize_t set_pwm_auto_channels(struct device *dev, int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); struct lm85_data *data = i2c_get_clientdata(client); - long val = simple_strtol(buf, NULL, 10); + long val = simple_strtol(buf, NULL, 10); mutex_lock(&data->update_lock); data->autofan[nr].config = (data->autofan[nr].config & (~0xe0)) - | ZONE_TO_REG(val) ; + | ZONE_TO_REG(val); lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr), data->autofan[nr].config); mutex_unlock(&data->update_lock); @@ -751,7 +757,7 @@ static ssize_t show_pwm_auto_pwm_min(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm)); + return sprintf(buf, "%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm)); } static ssize_t set_pwm_auto_pwm_min(struct device *dev, @@ -775,7 +781,7 @@ static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", data->autofan[nr].min_off); + return sprintf(buf, "%d\n", data->autofan[nr].min_off); } static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, @@ -792,8 +798,7 @@ static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, | data->syncpwm3 | (data->autofan[0].min_off ? 0x20 : 0) | (data->autofan[1].min_off ? 0x40 : 0) - | (data->autofan[2].min_off ? 0x80 : 0) - ); + | (data->autofan[2].min_off ? 0x80 : 0)); mutex_unlock(&data->update_lock); return count; } @@ -803,7 +808,7 @@ static ssize_t show_pwm_auto_pwm_freq(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq)); + return sprintf(buf, "%d\n", FREQ_FROM_REG(data->autofan[nr].freq)); } static ssize_t set_pwm_auto_pwm_freq(struct device *dev, @@ -818,8 +823,7 @@ static ssize_t set_pwm_auto_pwm_freq(struct device *dev, data->autofan[nr].freq = FREQ_TO_REG(val); lm85_write_value(client, LM85_REG_AFAN_RANGE(nr), (data->zone[nr].range << 4) - | data->autofan[nr].freq - ); + | data->autofan[nr].freq); mutex_unlock(&data->update_lock); return count; } @@ -849,7 +853,7 @@ static ssize_t show_temp_auto_temp_off(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) - + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) - HYST_FROM_REG(data->zone[nr].hyst)); } @@ -866,15 +870,13 @@ static ssize_t set_temp_auto_temp_off(struct device *dev, min = TEMP_FROM_REG(data->zone[nr].limit); data->zone[nr].off_desired = TEMP_TO_REG(val); data->zone[nr].hyst = HYST_TO_REG(min - val); - if ( nr == 0 || nr == 1 ) { + if (nr == 0 || nr == 1) { lm85_write_value(client, LM85_REG_AFAN_HYST1, (data->zone[0].hyst << 4) - | data->zone[1].hyst - ); + | data->zone[1].hyst); } else { lm85_write_value(client, LM85_REG_AFAN_HYST2, - (data->zone[2].hyst << 4) - ); + (data->zone[2].hyst << 4)); } mutex_unlock(&data->update_lock); return count; @@ -885,7 +887,7 @@ static ssize_t show_temp_auto_temp_min(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) ); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit)); } static ssize_t set_temp_auto_temp_min(struct device *dev, @@ -913,15 +915,13 @@ static ssize_t set_temp_auto_temp_min(struct device *dev, data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG( data->zone[nr].limit) - TEMP_FROM_REG( data->zone[nr].off_desired)); - if ( nr == 0 || nr == 1 ) { + if (nr == 0 || nr == 1) { lm85_write_value(client, LM85_REG_AFAN_HYST1, (data->zone[0].hyst << 4) - | data->zone[1].hyst - ); + | data->zone[1].hyst); } else { lm85_write_value(client, LM85_REG_AFAN_HYST2, - (data->zone[2].hyst << 4) - ); + (data->zone[2].hyst << 4)); } mutex_unlock(&data->update_lock); return count; @@ -932,7 +932,7 @@ static ssize_t show_temp_auto_temp_max(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) + + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) + RANGE_FROM_REG(data->zone[nr].range)); } @@ -962,11 +962,11 @@ static ssize_t show_temp_auto_temp_crit(struct device *dev, { int nr = to_sensor_dev_attr(attr)->index; struct lm85_data *data = lm85_update_device(dev); - return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical)); + return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].critical)); } static ssize_t set_temp_auto_temp_crit(struct device *dev, - struct device_attribute *attr,const char *buf, size_t count) + struct device_attribute *attr, const char *buf, size_t count) { int nr = to_sensor_dev_attr(attr)->index; struct i2c_client *client = to_i2c_client(dev); @@ -1130,7 +1130,7 @@ static const struct attribute_group lm85_group_in567 = { static int lm85_detect(struct i2c_adapter *adapter, int address, int kind) { - int company, verstep ; + int company, verstep; struct i2c_client *new_client = NULL; struct lm85_data *data; int err = 0; @@ -1139,8 +1139,8 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { /* We need to be able to do byte I/O */ - goto ERROR0 ; - }; + goto ERROR0; + } /* OK. For now, we presume we have a valid client. We now create the client structure, even though we cannot fill it completely yet. @@ -1171,82 +1171,81 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, /* If auto-detecting, Determine the chip type. */ if (kind <= 0) { dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n", - i2c_adapter_id(adapter), address ); - if( company == LM85_COMPANY_NATIONAL - && verstep == LM85_VERSTEP_LM85C ) { - kind = lm85c ; - } else if( company == LM85_COMPANY_NATIONAL - && verstep == LM85_VERSTEP_LM85B ) { - kind = lm85b ; - } else if( company == LM85_COMPANY_NATIONAL - && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) { + i2c_adapter_id(adapter), address); + if (company == LM85_COMPANY_NATIONAL + && verstep == LM85_VERSTEP_LM85C) { + kind = lm85c; + } else if (company == LM85_COMPANY_NATIONAL + && verstep == LM85_VERSTEP_LM85B) { + kind = lm85b; + } else if (company == LM85_COMPANY_NATIONAL + && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x" " Defaulting to LM85.\n", verstep); - kind = any_chip ; - } else if( company == LM85_COMPANY_ANALOG_DEV - && verstep == LM85_VERSTEP_ADM1027 ) { - kind = adm1027 ; - } else if( company == LM85_COMPANY_ANALOG_DEV + kind = any_chip; + } else if (company == LM85_COMPANY_ANALOG_DEV + && verstep == LM85_VERSTEP_ADM1027) { + kind = adm1027; + } else if (company == LM85_COMPANY_ANALOG_DEV && (verstep == LM85_VERSTEP_ADT7463 - || verstep == LM85_VERSTEP_ADT7463C) ) { - kind = adt7463 ; - } else if( company == LM85_COMPANY_ANALOG_DEV - && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) { + || verstep == LM85_VERSTEP_ADT7463C)) { + kind = adt7463; + } else if (company == LM85_COMPANY_ANALOG_DEV + && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x" - " Defaulting to Generic LM85.\n", verstep ); - kind = any_chip ; - } else if( company == LM85_COMPANY_SMSC + " Defaulting to Generic LM85.\n", verstep); + kind = any_chip; + } else if (company == LM85_COMPANY_SMSC && (verstep == LM85_VERSTEP_EMC6D100_A0 - || verstep == LM85_VERSTEP_EMC6D100_A1) ) { + || verstep == LM85_VERSTEP_EMC6D100_A1)) { /* Unfortunately, we can't tell a '100 from a '101 * from the registers. Since a '101 is a '100 * in a package with fewer pins and therefore no * 3.3V, 1.5V or 1.8V inputs, perhaps if those * inputs read 0, then it's a '101. */ - kind = emc6d100 ; - } else if( company == LM85_COMPANY_SMSC + kind = emc6d100; + } else if (company == LM85_COMPANY_SMSC && verstep == LM85_VERSTEP_EMC6D102) { - kind = emc6d102 ; - } else if( company == LM85_COMPANY_SMSC + kind = emc6d102; + } else if (company == LM85_COMPANY_SMSC && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { dev_err(&adapter->dev, "lm85: Detected SMSC chip\n"); dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x" - " Defaulting to Generic LM85.\n", verstep ); - kind = any_chip ; - } else if( kind == any_chip + " Defaulting to Generic LM85.\n", verstep); + kind = any_chip; + } else if (kind == any_chip && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) { dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n"); /* Leave kind as "any_chip" */ } else { dev_dbg(&adapter->dev, "Autodetection failed\n"); - /* Not an LM85 ... */ - if( kind == any_chip ) { /* User used force=x,y */ + /* Not an LM85... */ + if (kind == any_chip) { /* User used force=x,y */ dev_err(&adapter->dev, "Generic LM85 Version 6 not" " found at %d,0x%02x. Try force_lm85c.\n", - i2c_adapter_id(adapter), address ); + i2c_adapter_id(adapter), address); } - err = 0 ; + err = 0; goto ERROR1; } } /* Fill in the chip specific driver values */ - if ( kind == any_chip ) { + if (kind == any_chip) type_name = "lm85"; - } else if ( kind == lm85b ) { + else if (kind == lm85b) type_name = "lm85b"; - } else if ( kind == lm85c ) { + else if (kind == lm85c) type_name = "lm85c"; - } else if ( kind == adm1027 ) { + else if (kind == adm1027) type_name = "adm1027"; - } else if ( kind == adt7463 ) { + else if (kind == adt7463) type_name = "adt7463"; - } else if ( kind == emc6d100){ + else if (kind == emc6d100) type_name = "emc6d100"; - } else if ( kind == emc6d102 ) { + else if (kind == emc6d102) type_name = "emc6d102"; - } strlcpy(new_client->name, type_name, I2C_NAME_SIZE); /* Fill in the remaining client fields */ @@ -1291,16 +1290,16 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, return 0; /* Error out and cleanup code */ - ERROR3: + ERROR3: sysfs_remove_group(&new_client->dev.kobj, &lm85_group); sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in4); if (kind == emc6d100) sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in567); - ERROR2: + ERROR2: i2c_detach_client(new_client); - ERROR1: + ERROR1: kfree(data); - ERROR0: + ERROR0: return err; } @@ -1323,58 +1322,60 @@ static int lm85_read_value(struct i2c_client *client, u8 reg) int res; /* What size location is it? */ - switch( reg ) { - case LM85_REG_FAN(0) : /* Read WORD data */ - case LM85_REG_FAN(1) : - case LM85_REG_FAN(2) : - case LM85_REG_FAN(3) : - case LM85_REG_FAN_MIN(0) : - case LM85_REG_FAN_MIN(1) : - case LM85_REG_FAN_MIN(2) : - case LM85_REG_FAN_MIN(3) : - case LM85_REG_ALARM1 : /* Read both bytes at once */ - res = i2c_smbus_read_byte_data(client, reg) & 0xff ; - res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ; - break ; - case ADT7463_REG_TMIN_CTL1 : /* Read WORD MSB, LSB */ - res = i2c_smbus_read_byte_data(client, reg) << 8 ; - res |= i2c_smbus_read_byte_data(client, reg+1) & 0xff ; - break ; + switch (reg) { + case LM85_REG_FAN(0): /* Read WORD data */ + case LM85_REG_FAN(1): + case LM85_REG_FAN(2): + case LM85_REG_FAN(3): + case LM85_REG_FAN_MIN(0): + case LM85_REG_FAN_MIN(1): + case LM85_REG_FAN_MIN(2): + case LM85_REG_FAN_MIN(3): + case LM85_REG_ALARM1: /* Read both bytes at once */ + res = i2c_smbus_read_byte_data(client, reg) & 0xff; + res |= i2c_smbus_read_byte_data(client, reg + 1) << 8; + break; + case ADT7463_REG_TMIN_CTL1: /* Read WORD MSB, LSB */ + res = i2c_smbus_read_byte_data(client, reg) << 8; + res |= i2c_smbus_read_byte_data(client, reg + 1) & 0xff; + break; default: /* Read BYTE data */ res = i2c_smbus_read_byte_data(client, reg); - break ; + break; } - return res ; + return res; } static int lm85_write_value(struct i2c_client *client, u8 reg, int value) { - int res ; - - switch( reg ) { - case LM85_REG_FAN(0) : /* Write WORD data */ - case LM85_REG_FAN(1) : - case LM85_REG_FAN(2) : - case LM85_REG_FAN(3) : - case LM85_REG_FAN_MIN(0) : - case LM85_REG_FAN_MIN(1) : - case LM85_REG_FAN_MIN(2) : - case LM85_REG_FAN_MIN(3) : + int res; + + switch (reg) { + case LM85_REG_FAN(0): /* Write WORD data */ + case LM85_REG_FAN(1): + case LM85_REG_FAN(2): + case LM85_REG_FAN(3): + case LM85_REG_FAN_MIN(0): + case LM85_REG_FAN_MIN(1): + case LM85_REG_FAN_MIN(2): + case LM85_REG_FAN_MIN(3): /* NOTE: ALARM is read only, so not included here */ - res = i2c_smbus_write_byte_data(client, reg, value & 0xff) ; - res |= i2c_smbus_write_byte_data(client, reg+1, (value>>8) & 0xff) ; - break ; - case ADT7463_REG_TMIN_CTL1 : /* Write WORD MSB, LSB */ - res = i2c_smbus_write_byte_data(client, reg, (value>>8) & 0xff); - res |= i2c_smbus_write_byte_data(client, reg+1, value & 0xff) ; - break ; + res = i2c_smbus_write_byte_data(client, reg, value & 0xff); + res |= i2c_smbus_write_byte_data(client, reg + 1, + (value >> 8) & 0xff); + break; + case ADT7463_REG_TMIN_CTL1: /* Write WORD MSB, LSB */ + res = i2c_smbus_write_byte_data(client, reg, + (value >> 8) & 0xff); + res |= i2c_smbus_write_byte_data(client, reg + 1, value & 0xff); + break; default: /* Write BYTE data */ res = i2c_smbus_write_byte_data(client, reg, value); - break ; + break; } - return res ; + return res; } static void lm85_init_client(struct i2c_client *client) @@ -1387,21 +1388,21 @@ static void lm85_init_client(struct i2c_client *client) /* Warn if part was not "READY" */ value = lm85_read_value(client, LM85_REG_CONFIG); dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value); - if( value & 0x02 ) { + if (value & 0x02) { dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; - if( ! (value & 0x04) ) { + i2c_adapter_id(client->adapter), client->addr); + } + if (!(value & 0x04)) { dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; - if( value & 0x10 - && ( data->type == adm1027 - || data->type == adt7463 ) ) { + i2c_adapter_id(client->adapter), client->addr); + } + if (value & 0x10 + && (data->type == adm1027 + || data->type == adt7463)) { dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set. " "Please report this to the lm85 maintainer.\n", - i2c_adapter_id(client->adapter), client->addr ); - }; + i2c_adapter_id(client->adapter), client->addr); + } /* WE INTENTIONALLY make no changes to the limits, * offsets, pwms, fans and zones. If they were @@ -1414,7 +1415,7 @@ static void lm85_init_client(struct i2c_client *client) /* Start monitoring */ value = lm85_read_value(client, LM85_REG_CONFIG); /* Try to clear LOCK, Set START, save everything else */ - value = (value & ~ 0x02) | 0x01 ; + value = (value & ~0x02) | 0x01; dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value); lm85_write_value(client, LM85_REG_CONFIG, value); } @@ -1427,28 +1428,30 @@ static struct lm85_data *lm85_update_device(struct device *dev) mutex_lock(&data->update_lock); - if ( !data->valid || - time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) { + if (!data->valid || + time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL)) { /* Things that change quickly */ dev_dbg(&client->dev, "Reading sensor values\n"); - + /* Have to read extended bits first to "freeze" the * more significant bits that are read later. * There are 2 additional resolution bits per channel and we * have room for 4, so we shift them to the left. */ - if ( (data->type == adm1027) || (data->type == adt7463) ) { + if (data->type == adm1027 || data->type == adt7463) { int ext1 = lm85_read_value(client, ADM1027_REG_EXTEND_ADC1); int ext2 = lm85_read_value(client, ADM1027_REG_EXTEND_ADC2); int val = (ext1 << 8) + ext2; - for(i = 0; i <= 4; i++) - data->in_ext[i] = ((val>>(i * 2))&0x03) << 2; + for (i = 0; i <= 4; i++) + data->in_ext[i] = + ((val >> (i * 2)) & 0x03) << 2; - for(i = 0; i <= 2; i++) - data->temp_ext[i] = (val>>((i + 4) * 2))&0x0c; + for (i = 0; i <= 2; i++) + data->temp_ext[i] = + (val >> ((i + 4) * 2)) & 0x0c; } data->vid = lm85_read_value(client, LM85_REG_VID); @@ -1480,21 +1483,21 @@ static struct lm85_data *lm85_update_device(struct device *dev) data->alarms = lm85_read_value(client, LM85_REG_ALARM1); - if ( data->type == adt7463 ) { - if( data->therm_total < ULONG_MAX - 256 ) { + if (data->type == adt7463) { + if (data->therm_total < ULONG_MAX - 256) { data->therm_total += - lm85_read_value(client, ADT7463_REG_THERM ); + lm85_read_value(client, ADT7463_REG_THERM); } - } else if ( data->type == emc6d100 ) { + } else if (data->type == emc6d100) { /* Three more voltage sensors */ for (i = 5; i <= 7; ++i) { - data->in[i] = - lm85_read_value(client, EMC6D100_REG_IN(i)); + data->in[i] = lm85_read_value(client, + EMC6D100_REG_IN(i)); } /* More alarm bits */ - data->alarms |= - lm85_read_value(client, EMC6D100_REG_ALARM3) << 16; - } else if (data->type == emc6d102 ) { + data->alarms |= lm85_read_value(client, + EMC6D100_REG_ALARM3) << 16; + } else if (data->type == emc6d102) { /* Have to read LSB bits after the MSB ones because the reading of the MSB bits has frozen the LSBs (backward from the ADM1027). @@ -1518,11 +1521,11 @@ static struct lm85_data *lm85_update_device(struct device *dev) data->temp_ext[2] = (ext1 >> 4) & 0x0f; } - data->last_reading = jiffies ; - }; /* last_reading */ + data->last_reading = jiffies; + } /* last_reading */ - if ( !data->valid || - time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) { + if (!data->valid || + time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL)) { /* Things that don't change often */ dev_dbg(&client->dev, "Reading config values\n"); @@ -1540,12 +1543,12 @@ static struct lm85_data *lm85_update_device(struct device *dev) LM85_REG_IN_MAX(4)); } - if ( data->type == emc6d100 ) { + if (data->type == emc6d100) { for (i = 5; i <= 7; ++i) { - data->in_min[i] = - lm85_read_value(client, EMC6D100_REG_IN_MIN(i)); - data->in_max[i] = - lm85_read_value(client, EMC6D100_REG_IN_MAX(i)); + data->in_min[i] = lm85_read_value(client, + EMC6D100_REG_IN_MIN(i)); + data->in_max[i] = lm85_read_value(client, + EMC6D100_REG_IN_MAX(i)); } } @@ -1562,12 +1565,12 @@ static struct lm85_data *lm85_update_device(struct device *dev) } for (i = 0; i <= 2; ++i) { - int val ; + int val; data->autofan[i].config = lm85_read_value(client, LM85_REG_AFAN_CONFIG(i)); val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i)); - data->autofan[i].freq = val & 0x07 ; - data->zone[i].range = (val >> 4) & 0x0f ; + data->autofan[i].freq = val & 0x07; + data->zone[i].range = (val >> 4) & 0x0f; data->autofan[i].min_pwm = lm85_read_value(client, LM85_REG_AFAN_MINPWM(i)); data->zone[i].limit = @@ -1577,50 +1580,50 @@ static struct lm85_data *lm85_update_device(struct device *dev) } i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); - data->smooth[0] = i & 0x0f ; - data->syncpwm3 = i & 0x10 ; /* Save PWM3 config */ - data->autofan[0].min_off = (i & 0x20) != 0 ; - data->autofan[1].min_off = (i & 0x40) != 0 ; - data->autofan[2].min_off = (i & 0x80) != 0 ; + data->smooth[0] = i & 0x0f; + data->syncpwm3 = i & 0x10; /* Save PWM3 config */ + data->autofan[0].min_off = (i & 0x20) != 0; + data->autofan[1].min_off = (i & 0x40) != 0; + data->autofan[2].min_off = (i & 0x80) != 0; i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2); - data->smooth[1] = (i>>4) & 0x0f ; - data->smooth[2] = i & 0x0f ; + data->smooth[1] = (i >> 4) & 0x0f; + data->smooth[2] = i & 0x0f; i = lm85_read_value(client, LM85_REG_AFAN_HYST1); - data->zone[0].hyst = (i>>4) & 0x0f ; - data->zone[1].hyst = i & 0x0f ; + data->zone[0].hyst = (i >> 4) & 0x0f; + data->zone[1].hyst = i & 0x0f; i = lm85_read_value(client, LM85_REG_AFAN_HYST2); - data->zone[2].hyst = (i>>4) & 0x0f ; + data->zone[2].hyst = (i >> 4) & 0x0f; - if ( (data->type == lm85b) || (data->type == lm85c) ) { + if (data->type == lm85b || data->type == lm85c) { data->tach_mode = lm85_read_value(client, - LM85_REG_TACH_MODE ); + LM85_REG_TACH_MODE); data->spinup_ctl = lm85_read_value(client, - LM85_REG_SPINUP_CTL ); - } else if ( (data->type == adt7463) || (data->type == adm1027) ) { - if ( data->type == adt7463 ) { + LM85_REG_SPINUP_CTL); + } else if (data->type == adt7463 || data->type == adm1027) { + if (data->type == adt7463) { for (i = 0; i <= 2; ++i) { data->oppoint[i] = lm85_read_value(client, - ADT7463_REG_OPPOINT(i) ); + ADT7463_REG_OPPOINT(i)); } data->tmin_ctl = lm85_read_value(client, - ADT7463_REG_TMIN_CTL1 ); + ADT7463_REG_TMIN_CTL1); data->therm_limit = lm85_read_value(client, - ADT7463_REG_THERM_LIMIT ); + ADT7463_REG_THERM_LIMIT); } for (i = 0; i <= 2; ++i) { - data->temp_offset[i] = lm85_read_value(client, - ADM1027_REG_TEMP_OFFSET(i) ); + data->temp_offset[i] = lm85_read_value(client, + ADM1027_REG_TEMP_OFFSET(i)); } data->tach_mode = lm85_read_value(client, - ADM1027_REG_CONFIG3 ); + ADM1027_REG_CONFIG3); data->fan_ppr = lm85_read_value(client, - ADM1027_REG_FAN_PPR ); + ADM1027_REG_FAN_PPR); } - + data->last_config = jiffies; - }; /* last_config */ + } /* last_config */ data->valid = 1; @@ -1635,7 +1638,7 @@ static int __init sm_lm85_init(void) return i2c_add_driver(&lm85_driver); } -static void __exit sm_lm85_exit(void) +static void __exit sm_lm85_exit(void) { i2c_del_driver(&lm85_driver); } @@ -1645,7 +1648,9 @@ static void __exit sm_lm85_exit(void) * post 2.7.0 CVS changes. */ MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Philip Pokorny , Margit Schubert-While , Justin Thiessen , " + "Margit Schubert-While , " + "Justin Thiessen Date: Thu, 1 May 2008 08:47:33 +0200 Subject: [PATCH 0509/1024] hwmon: (lm85) Drop dead code Drop a lot of useless register defines, conversion macros, data structure members and update code. All these register values were read from the device but nothing is done out of them, so this is all dead code in practice. Signed-off-by: Jean Delvare Acked-by: Juerg Haefliger Signed-off-by: Mark M. Hoffman --- Documentation/hwmon/lm85 | 11 ++---- drivers/hwmon/lm85.c | 82 +--------------------------------------- 2 files changed, 6 insertions(+), 87 deletions(-) diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85 index 9549237530c..6d41db7f17f 100644 --- a/Documentation/hwmon/lm85 +++ b/Documentation/hwmon/lm85 @@ -96,11 +96,6 @@ initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has confirmed this "bug". The ADT7463 is reported to work as described in the documentation. The current lm85 driver does not show the offset register. -The ADT7463 has a THERM asserted counter. This counter has a 22.76ms -resolution and a range of 5.8 seconds. The driver implements a 32-bit -accumulator of the counter value to extend the range to over a year. The -counter will stay at it's max value until read. - See the vendor datasheets for more information. There is application note from National (AN-1260) with some additional information about the LM85. The Analog Devices datasheet is very detailed and describes a procedure for @@ -206,13 +201,15 @@ Configuration choices: The National LM85's have two vendor specific configuration features. Tach. mode and Spinup Control. For more details on these, -see the LM85 datasheet or Application Note AN-1260. +see the LM85 datasheet or Application Note AN-1260. These features +are not currently supported by the lm85 driver. The Analog Devices ADM1027 has several vendor specific enhancements. The number of pulses-per-rev of the fans can be set, Tach monitoring can be optimized for PWM operation, and an offset can be applied to the temperatures to compensate for systemic errors in the -measurements. +measurements. These features are not currently supported by the lm85 +driver. In addition to the ADM1027 features, the ADT7463 also has Tmin control and THERM asserted counts. Automatic Tmin control acts to adjust the diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 0c0fede8dde..0d31435b333 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -56,16 +56,9 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_REG_PWM(nr) (0x30 + (nr)) -#define ADT7463_REG_OPPOINT(nr) (0x33 + (nr)) - -#define ADT7463_REG_TMIN_CTL1 0x36 -#define ADT7463_REG_TMIN_CTL2 0x37 - -#define LM85_REG_DEVICE 0x3d #define LM85_REG_COMPANY 0x3e #define LM85_REG_VERSTEP 0x3f /* These are the recognized values for the above regs */ -#define LM85_DEVICE_ADX 0x27 #define LM85_COMPANY_NATIONAL 0x01 #define LM85_COMPANY_ANALOG_DEV 0x41 #define LM85_COMPANY_SMSC 0x5c @@ -91,27 +84,14 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); #define LM85_REG_AFAN_CONFIG(nr) (0x5c + (nr)) #define LM85_REG_AFAN_RANGE(nr) (0x5f + (nr)) #define LM85_REG_AFAN_SPIKE1 0x62 -#define LM85_REG_AFAN_SPIKE2 0x63 #define LM85_REG_AFAN_MINPWM(nr) (0x64 + (nr)) #define LM85_REG_AFAN_LIMIT(nr) (0x67 + (nr)) #define LM85_REG_AFAN_CRITICAL(nr) (0x6a + (nr)) #define LM85_REG_AFAN_HYST1 0x6d #define LM85_REG_AFAN_HYST2 0x6e -#define LM85_REG_TACH_MODE 0x74 -#define LM85_REG_SPINUP_CTL 0x75 - -#define ADM1027_REG_TEMP_OFFSET(nr) (0x70 + (nr)) -#define ADM1027_REG_CONFIG2 0x73 -#define ADM1027_REG_INTMASK1 0x74 -#define ADM1027_REG_INTMASK2 0x75 #define ADM1027_REG_EXTEND_ADC1 0x76 #define ADM1027_REG_EXTEND_ADC2 0x77 -#define ADM1027_REG_CONFIG3 0x78 -#define ADM1027_REG_FAN_PPR 0x7b - -#define ADT7463_REG_THERM 0x79 -#define ADT7463_REG_THERM_LIMIT 0x7A #define EMC6D100_REG_ALARM3 0x7d /* IN5, IN6 and IN7 */ @@ -263,13 +243,6 @@ static int ZONE_TO_REG(int zone) #define HYST_TO_REG(val) SENSORS_LIMIT(((val) + 500) / 1000, 0, 15) #define HYST_FROM_REG(val) ((val) * 1000) -#define OFFSET_TO_REG(val) SENSORS_LIMIT((val) / 25, -127, 127) -#define OFFSET_FROM_REG(val) ((val) * 25) - -#define PPR_MASK(fan) (0x03 << ((fan) * 2)) -#define PPR_TO_REG(val, fan) (SENSORS_LIMIT((val) - 1, 0, 3) << ((fan) * 2)) -#define PPR_FROM_REG(val, fan) ((((val) >> ((fan) * 2)) & 0x03) + 1) - /* Chip sampling rates * * Some sensors are not updated more frequently than once per second @@ -330,23 +303,15 @@ struct lm85_data { s8 temp[3]; /* Register value */ s8 temp_min[3]; /* Register value */ s8 temp_max[3]; /* Register value */ - s8 temp_offset[3]; /* Register value */ u16 fan[4]; /* Register value */ u16 fan_min[4]; /* Register value */ u8 pwm[3]; /* Register value */ - u8 spinup_ctl; /* Register encoding, combined */ - u8 tach_mode; /* Register encoding, combined */ u8 temp_ext[3]; /* Decoded values */ u8 in_ext[8]; /* Decoded values */ - u8 fan_ppr; /* Register value */ - u8 smooth[3]; /* Register encoding */ + u8 smooth[1]; /* Register encoding */ u8 vid; /* Register value */ u8 vrm; /* VRM version */ u8 syncpwm3; /* Saved PWM3 for TACH 2,3,4 config */ - u8 oppoint[3]; /* Register value */ - u16 tmin_ctl; /* Register value */ - unsigned long therm_total; /* Cummulative therm count */ - u8 therm_limit; /* Register value */ u32 alarms; /* Register encoding, combined */ struct lm85_autofan autofan[3]; struct lm85_zone zone[3]; @@ -1335,10 +1300,6 @@ static int lm85_read_value(struct i2c_client *client, u8 reg) res = i2c_smbus_read_byte_data(client, reg) & 0xff; res |= i2c_smbus_read_byte_data(client, reg + 1) << 8; break; - case ADT7463_REG_TMIN_CTL1: /* Read WORD MSB, LSB */ - res = i2c_smbus_read_byte_data(client, reg) << 8; - res |= i2c_smbus_read_byte_data(client, reg + 1) & 0xff; - break; default: /* Read BYTE data */ res = i2c_smbus_read_byte_data(client, reg); break; @@ -1365,11 +1326,6 @@ static int lm85_write_value(struct i2c_client *client, u8 reg, int value) res |= i2c_smbus_write_byte_data(client, reg + 1, (value >> 8) & 0xff); break; - case ADT7463_REG_TMIN_CTL1: /* Write WORD MSB, LSB */ - res = i2c_smbus_write_byte_data(client, reg, - (value >> 8) & 0xff); - res |= i2c_smbus_write_byte_data(client, reg + 1, value & 0xff); - break; default: /* Write BYTE data */ res = i2c_smbus_write_byte_data(client, reg, value); break; @@ -1483,12 +1439,7 @@ static struct lm85_data *lm85_update_device(struct device *dev) data->alarms = lm85_read_value(client, LM85_REG_ALARM1); - if (data->type == adt7463) { - if (data->therm_total < ULONG_MAX - 256) { - data->therm_total += - lm85_read_value(client, ADT7463_REG_THERM); - } - } else if (data->type == emc6d100) { + if (data->type == emc6d100) { /* Three more voltage sensors */ for (i = 5; i <= 7; ++i) { data->in[i] = lm85_read_value(client, @@ -1585,9 +1536,6 @@ static struct lm85_data *lm85_update_device(struct device *dev) data->autofan[0].min_off = (i & 0x20) != 0; data->autofan[1].min_off = (i & 0x40) != 0; data->autofan[2].min_off = (i & 0x80) != 0; - i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2); - data->smooth[1] = (i >> 4) & 0x0f; - data->smooth[2] = i & 0x0f; i = lm85_read_value(client, LM85_REG_AFAN_HYST1); data->zone[0].hyst = (i >> 4) & 0x0f; @@ -1596,32 +1544,6 @@ static struct lm85_data *lm85_update_device(struct device *dev) i = lm85_read_value(client, LM85_REG_AFAN_HYST2); data->zone[2].hyst = (i >> 4) & 0x0f; - if (data->type == lm85b || data->type == lm85c) { - data->tach_mode = lm85_read_value(client, - LM85_REG_TACH_MODE); - data->spinup_ctl = lm85_read_value(client, - LM85_REG_SPINUP_CTL); - } else if (data->type == adt7463 || data->type == adm1027) { - if (data->type == adt7463) { - for (i = 0; i <= 2; ++i) { - data->oppoint[i] = lm85_read_value(client, - ADT7463_REG_OPPOINT(i)); - } - data->tmin_ctl = lm85_read_value(client, - ADT7463_REG_TMIN_CTL1); - data->therm_limit = lm85_read_value(client, - ADT7463_REG_THERM_LIMIT); - } - for (i = 0; i <= 2; ++i) { - data->temp_offset[i] = lm85_read_value(client, - ADM1027_REG_TEMP_OFFSET(i)); - } - data->tach_mode = lm85_read_value(client, - ADM1027_REG_CONFIG3); - data->fan_ppr = lm85_read_value(client, - ADM1027_REG_FAN_PPR); - } - data->last_config = jiffies; } /* last_config */ -- GitLab From 7133e56f29030b13601d3399e20050053e560860 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 12 Apr 2008 19:56:35 +0200 Subject: [PATCH 0510/1024] hwmon: (lm85) Don't write back cached values In set_pwm_auto_pwm_minctl, we write cached register bits back to the chip. This is a bad idea as we have no guarantee that the cache is up-to-date. Better read a fresh register value from the chip, it's safer and in fact it is also more simple. Signed-off-by: Jean Delvare Acked-by: Juerg Haefliger Signed-off-by: Mark M. Hoffman --- drivers/hwmon/lm85.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 0d31435b333..645b98c187c 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -308,10 +308,8 @@ struct lm85_data { u8 pwm[3]; /* Register value */ u8 temp_ext[3]; /* Decoded values */ u8 in_ext[8]; /* Decoded values */ - u8 smooth[1]; /* Register encoding */ u8 vid; /* Register value */ u8 vrm; /* VRM version */ - u8 syncpwm3; /* Saved PWM3 for TACH 2,3,4 config */ u32 alarms; /* Register encoding, combined */ struct lm85_autofan autofan[3]; struct lm85_zone zone[3]; @@ -756,14 +754,15 @@ static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, struct i2c_client *client = to_i2c_client(dev); struct lm85_data *data = i2c_get_clientdata(client); long val = simple_strtol(buf, NULL, 10); + u8 tmp; mutex_lock(&data->update_lock); data->autofan[nr].min_off = val; - lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0] - | data->syncpwm3 - | (data->autofan[0].min_off ? 0x20 : 0) - | (data->autofan[1].min_off ? 0x40 : 0) - | (data->autofan[2].min_off ? 0x80 : 0)); + tmp = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); + tmp &= ~(0x20 << nr); + if (data->autofan[nr].min_off) + tmp |= 0x20 << nr; + lm85_write_value(client, LM85_REG_AFAN_SPIKE1, tmp); mutex_unlock(&data->update_lock); return count; } @@ -1531,8 +1530,6 @@ static struct lm85_data *lm85_update_device(struct device *dev) } i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1); - data->smooth[0] = i & 0x0f; - data->syncpwm3 = i & 0x10; /* Save PWM3 config */ data->autofan[0].min_off = (i & 0x20) != 0; data->autofan[1].min_off = (i & 0x40) != 0; data->autofan[2].min_off = (i & 0x80) != 0; -- GitLab From e89e22b23bceb3fbbcfb931ad17a564b7c1eaa55 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 25 Jun 2008 08:47:35 -0400 Subject: [PATCH 0511/1024] hwmon: (lm85) Misc cleanups Misc cleanups to the lm85 hardware monitoring driver: * Mark constant arrays as const. * Remove useless masks. * Have lm85_write_value return void - nobody is checking the returned value anyway and in some cases it was plain wrong. * Remove useless initializations. * Rename new_client to client in lm85_detect. * Replace cascaded if/else with a switch/case in lm85_detect. * Group similar loops in lm85_update_device. * Remove legacy comments. Signed-off-by: Jean Delvare Acked-by: Juerg Haefliger Signed-off-by: Mark M. Hoffman --- drivers/hwmon/lm85.c | 151 +++++++++++++++++++------------------------ 1 file changed, 67 insertions(+), 84 deletions(-) diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 645b98c187c..c7e10af0173 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -110,7 +110,7 @@ I2C_CLIENT_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102); */ /* IN are scaled acording to built-in resistors */ -static int lm85_scaling[] = { /* .001 Volts */ +static const int lm85_scaling[] = { /* .001 Volts */ 2500, 2250, 3300, 5000, 12000, 3300, 1500, 1800 /*EMC6D100*/ }; @@ -164,7 +164,7 @@ static inline u16 FAN_TO_REG(unsigned long val) */ /* These are the zone temperature range encodings in .001 degree C */ -static int lm85_range_map[] = { +static const int lm85_range_map[] = { 2000, 2500, 3300, 4000, 5000, 6600, 8000, 10000, 13300, 16000, 20000, 26600, 32000, 40000, 53300, 80000 }; @@ -190,13 +190,8 @@ static int RANGE_TO_REG(int range) } #define RANGE_FROM_REG(val) lm85_range_map[(val) & 0x0f] -/* These are the Acoustic Enhancement, or Temperature smoothing encodings - * NOTE: The enable/disable bit is INCLUDED in these encodings as the - * MSB (bit 3, value 8). If the enable bit is 0, the encoded value - * is ignored, or set to 0. - */ /* These are the PWM frequency encodings */ -static int lm85_freq_map[] = { /* .1 Hz */ +static const int lm85_freq_map[] = { /* .1 Hz */ 100, 150, 230, 300, 380, 470, 620, 940 }; @@ -209,7 +204,7 @@ static int FREQ_TO_REG(int freq) for (i = 0; i < 7; ++i) if (freq <= lm85_freq_map[i]) break; - return i & 0x07; + return i; } #define FREQ_FROM_REG(val) lm85_freq_map[(val) & 0x07] @@ -225,8 +220,8 @@ static int FREQ_TO_REG(int freq) * -2 -- PWM responds to manual control */ -static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 }; -#define ZONE_FROM_REG(val) lm85_zone_map[((val) >> 5) & 0x07] +static const int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 }; +#define ZONE_FROM_REG(val) lm85_zone_map[(val) >> 5] static int ZONE_TO_REG(int zone) { @@ -237,7 +232,7 @@ static int ZONE_TO_REG(int zone) break; if (i > 7) /* Not found. */ i = 3; /* Always 100% */ - return (i & 0x07) << 5; + return i << 5; } #define HYST_TO_REG(val) SENSORS_LIMIT(((val) + 500) / 1000, 0, 15) @@ -321,7 +316,7 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, static int lm85_detach_client(struct i2c_client *client); static int lm85_read_value(struct i2c_client *client, u8 reg); -static int lm85_write_value(struct i2c_client *client, u8 reg, int value); +static void lm85_write_value(struct i2c_client *client, u8 reg, int value); static struct lm85_data *lm85_update_device(struct device *dev); static void lm85_init_client(struct i2c_client *client); @@ -1095,13 +1090,12 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, int kind) { int company, verstep; - struct i2c_client *new_client = NULL; + struct i2c_client *client; struct lm85_data *data; int err = 0; - const char *type_name = ""; + const char *type_name; - if (!i2c_check_functionality(adapter, - I2C_FUNC_SMBUS_BYTE_DATA)) { + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { /* We need to be able to do byte I/O */ goto ERROR0; } @@ -1115,21 +1109,20 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, goto ERROR0; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm85_driver; - new_client->flags = 0; + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &lm85_driver; /* Now, we do the remaining detection. */ - company = lm85_read_value(new_client, LM85_REG_COMPANY); - verstep = lm85_read_value(new_client, LM85_REG_VERSTEP); + company = lm85_read_value(client, LM85_REG_COMPANY); + verstep = lm85_read_value(client, LM85_REG_VERSTEP); dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with" " COMPANY: 0x%02x and VERSTEP: 0x%02x\n", - i2c_adapter_id(new_client->adapter), new_client->addr, + i2c_adapter_id(client->adapter), client->addr, company, verstep); /* If auto-detecting, Determine the chip type. */ @@ -1196,56 +1189,65 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, } /* Fill in the chip specific driver values */ - if (kind == any_chip) - type_name = "lm85"; - else if (kind == lm85b) + switch (kind) { + case lm85b: type_name = "lm85b"; - else if (kind == lm85c) + break; + case lm85c: type_name = "lm85c"; - else if (kind == adm1027) + break; + case adm1027: type_name = "adm1027"; - else if (kind == adt7463) + break; + case adt7463: type_name = "adt7463"; - else if (kind == emc6d100) + break; + case emc6d100: type_name = "emc6d100"; - else if (kind == emc6d102) + break; + case emc6d102: type_name = "emc6d102"; - strlcpy(new_client->name, type_name, I2C_NAME_SIZE); + break; + default: + type_name = "lm85"; + } + strlcpy(client->name, type_name, I2C_NAME_SIZE); /* Fill in the remaining client fields */ data->type = kind; - data->valid = 0; mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + err = i2c_attach_client(client); + if (err) goto ERROR1; /* Set the VRM version */ data->vrm = vid_which_vrm(); /* Initialize the LM85 chip */ - lm85_init_client(new_client); + lm85_init_client(client); /* Register sysfs hooks */ - if ((err = sysfs_create_group(&new_client->dev.kobj, &lm85_group))) + err = sysfs_create_group(&client->dev.kobj, &lm85_group); + if (err) goto ERROR2; /* The ADT7463 has an optional VRM 10 mode where pin 21 is used as a sixth digital VID input rather than an analog input. */ - data->vid = lm85_read_value(new_client, LM85_REG_VID); + data->vid = lm85_read_value(client, LM85_REG_VID); if (!(kind == adt7463 && (data->vid & 0x80))) - if ((err = sysfs_create_group(&new_client->dev.kobj, + if ((err = sysfs_create_group(&client->dev.kobj, &lm85_group_in4))) goto ERROR3; /* The EMC6D100 has 3 additional voltage inputs */ if (kind == emc6d100) - if ((err = sysfs_create_group(&new_client->dev.kobj, + if ((err = sysfs_create_group(&client->dev.kobj, &lm85_group_in567))) goto ERROR3; - data->hwmon_dev = hwmon_device_register(&new_client->dev); + data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); goto ERROR3; @@ -1255,12 +1257,12 @@ static int lm85_detect(struct i2c_adapter *adapter, int address, /* Error out and cleanup code */ ERROR3: - sysfs_remove_group(&new_client->dev.kobj, &lm85_group); - sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in4); + sysfs_remove_group(&client->dev.kobj, &lm85_group); + sysfs_remove_group(&client->dev.kobj, &lm85_group_in4); if (kind == emc6d100) - sysfs_remove_group(&new_client->dev.kobj, &lm85_group_in567); + sysfs_remove_group(&client->dev.kobj, &lm85_group_in567); ERROR2: - i2c_detach_client(new_client); + i2c_detach_client(client); ERROR1: kfree(data); ERROR0: @@ -1307,10 +1309,8 @@ static int lm85_read_value(struct i2c_client *client, u8 reg) return res; } -static int lm85_write_value(struct i2c_client *client, u8 reg, int value) +static void lm85_write_value(struct i2c_client *client, u8 reg, int value) { - int res; - switch (reg) { case LM85_REG_FAN(0): /* Write WORD data */ case LM85_REG_FAN(1): @@ -1321,16 +1321,13 @@ static int lm85_write_value(struct i2c_client *client, u8 reg, int value) case LM85_REG_FAN_MIN(2): case LM85_REG_FAN_MIN(3): /* NOTE: ALARM is read only, so not included here */ - res = i2c_smbus_write_byte_data(client, reg, value & 0xff); - res |= i2c_smbus_write_byte_data(client, reg + 1, - (value >> 8) & 0xff); + i2c_smbus_write_byte_data(client, reg, value & 0xff); + i2c_smbus_write_byte_data(client, reg + 1, value >> 8); break; default: /* Write BYTE data */ - res = i2c_smbus_write_byte_data(client, reg, value); + i2c_smbus_write_byte_data(client, reg, value); break; } - - return res; } static void lm85_init_client(struct i2c_client *client) @@ -1414,6 +1411,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) for (i = 0; i <= 3; ++i) { data->in[i] = lm85_read_value(client, LM85_REG_IN(i)); + data->fan[i] = + lm85_read_value(client, LM85_REG_FAN(i)); } if (!(data->type == adt7463 && (data->vid & 0x80))) { @@ -1421,17 +1420,9 @@ static struct lm85_data *lm85_update_device(struct device *dev) LM85_REG_IN(4)); } - for (i = 0; i <= 3; ++i) { - data->fan[i] = - lm85_read_value(client, LM85_REG_FAN(i)); - } - for (i = 0; i <= 2; ++i) { data->temp[i] = lm85_read_value(client, LM85_REG_TEMP(i)); - } - - for (i = 0; i <= 2; ++i) { data->pwm[i] = lm85_read_value(client, LM85_REG_PWM(i)); } @@ -1462,13 +1453,13 @@ static struct lm85_data *lm85_update_device(struct device *dev) EMC6D102_REG_EXTEND_ADC4); data->in_ext[0] = ext3 & 0x0f; data->in_ext[1] = ext4 & 0x0f; - data->in_ext[2] = (ext4 >> 4) & 0x0f; - data->in_ext[3] = (ext3 >> 4) & 0x0f; - data->in_ext[4] = (ext2 >> 4) & 0x0f; + data->in_ext[2] = ext4 >> 4; + data->in_ext[3] = ext3 >> 4; + data->in_ext[4] = ext2 >> 4; data->temp_ext[0] = ext1 & 0x0f; data->temp_ext[1] = ext2 & 0x0f; - data->temp_ext[2] = (ext1 >> 4) & 0x0f; + data->temp_ext[2] = ext1 >> 4; } data->last_reading = jiffies; @@ -1484,6 +1475,8 @@ static struct lm85_data *lm85_update_device(struct device *dev) lm85_read_value(client, LM85_REG_IN_MIN(i)); data->in_max[i] = lm85_read_value(client, LM85_REG_IN_MAX(i)); + data->fan_min[i] = + lm85_read_value(client, LM85_REG_FAN_MIN(i)); } if (!(data->type == adt7463 && (data->vid & 0x80))) { @@ -1502,25 +1495,19 @@ static struct lm85_data *lm85_update_device(struct device *dev) } } - for (i = 0; i <= 3; ++i) { - data->fan_min[i] = - lm85_read_value(client, LM85_REG_FAN_MIN(i)); - } - for (i = 0; i <= 2; ++i) { + int val; + data->temp_min[i] = lm85_read_value(client, LM85_REG_TEMP_MIN(i)); data->temp_max[i] = lm85_read_value(client, LM85_REG_TEMP_MAX(i)); - } - for (i = 0; i <= 2; ++i) { - int val; data->autofan[i].config = lm85_read_value(client, LM85_REG_AFAN_CONFIG(i)); val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i)); data->autofan[i].freq = val & 0x07; - data->zone[i].range = (val >> 4) & 0x0f; + data->zone[i].range = val >> 4; data->autofan[i].min_pwm = lm85_read_value(client, LM85_REG_AFAN_MINPWM(i)); data->zone[i].limit = @@ -1535,11 +1522,11 @@ static struct lm85_data *lm85_update_device(struct device *dev) data->autofan[2].min_off = (i & 0x80) != 0; i = lm85_read_value(client, LM85_REG_AFAN_HYST1); - data->zone[0].hyst = (i >> 4) & 0x0f; + data->zone[0].hyst = i >> 4; data->zone[1].hyst = i & 0x0f; i = lm85_read_value(client, LM85_REG_AFAN_HYST2); - data->zone[2].hyst = (i >> 4) & 0x0f; + data->zone[2].hyst = i >> 4; data->last_config = jiffies; } /* last_config */ @@ -1562,14 +1549,10 @@ static void __exit sm_lm85_exit(void) i2c_del_driver(&lm85_driver); } -/* Thanks to Richard Barrington for adding the LM85 to sensors-detect. - * Thanks to Margit Schubert-While for help with - * post 2.7.0 CVS changes. - */ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Philip Pokorny , " "Margit Schubert-While , " - "Justin Thiessen "); MODULE_DESCRIPTION("LM85-B, LM85-C driver"); module_init(sm_lm85_init); -- GitLab From 5f44759470f7248f74947a39cba339009d62052c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 25 Jun 2008 09:10:30 -0400 Subject: [PATCH 0512/1024] hwmon: (lm85) Simplify device initialization function Clean up and simplify the device initialization function: * Degrade error messages to warnings - what they really are. * Stop warning about VxI mode, we don't really care. * Drop comment about lack of limit initialization - that's the standard way, all hardware monitoring drivers do that. * Only read the configuration register once. * Only write back to the configuration register if needed. * Don't attempt to clear the lock bit, it locks itself to 1. * Move the function to before it's called, so that we no longer need to forware declare it. Signed-off-by: Jean Delvare Signed-off-by: Mark M. Hoffman --- drivers/hwmon/lm85.c | 61 +++++++++++++------------------------------- 1 file changed, 18 insertions(+), 43 deletions(-) diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index c7e10af0173..12d446f54f9 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -318,7 +318,6 @@ static int lm85_detach_client(struct i2c_client *client); static int lm85_read_value(struct i2c_client *client, u8 reg); static void lm85_write_value(struct i2c_client *client, u8 reg, int value); static struct lm85_data *lm85_update_device(struct device *dev); -static void lm85_init_client(struct i2c_client *client); static struct i2c_driver lm85_driver = { @@ -1086,6 +1085,24 @@ static const struct attribute_group lm85_group_in567 = { .attrs = lm85_attributes_in567, }; +static void lm85_init_client(struct i2c_client *client) +{ + int value; + + /* Start monitoring if needed */ + value = lm85_read_value(client, LM85_REG_CONFIG); + if (!(value & 0x01)) { + dev_info(&client->dev, "Starting monitoring\n"); + lm85_write_value(client, LM85_REG_CONFIG, value | 0x01); + } + + /* Warn about unusual configuration bits */ + if (value & 0x02) + dev_warn(&client->dev, "Device configuration is locked\n"); + if (!(value & 0x04)) + dev_warn(&client->dev, "Device is not ready\n"); +} + static int lm85_detect(struct i2c_adapter *adapter, int address, int kind) { @@ -1330,48 +1347,6 @@ static void lm85_write_value(struct i2c_client *client, u8 reg, int value) } } -static void lm85_init_client(struct i2c_client *client) -{ - int value; - struct lm85_data *data = i2c_get_clientdata(client); - - dev_dbg(&client->dev, "Initializing device\n"); - - /* Warn if part was not "READY" */ - value = lm85_read_value(client, LM85_REG_CONFIG); - dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value); - if (value & 0x02) { - dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n", - i2c_adapter_id(client->adapter), client->addr); - } - if (!(value & 0x04)) { - dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n", - i2c_adapter_id(client->adapter), client->addr); - } - if (value & 0x10 - && (data->type == adm1027 - || data->type == adt7463)) { - dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set. " - "Please report this to the lm85 maintainer.\n", - i2c_adapter_id(client->adapter), client->addr); - } - - /* WE INTENTIONALLY make no changes to the limits, - * offsets, pwms, fans and zones. If they were - * configured, we don't want to mess with them. - * If they weren't, the default is 100% PWM, no - * control and will suffice until 'sensors -s' - * can be run by the user. - */ - - /* Start monitoring */ - value = lm85_read_value(client, LM85_REG_CONFIG); - /* Try to clear LOCK, Set START, save everything else */ - value = (value & ~0x02) | 0x01; - dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value); - lm85_write_value(client, LM85_REG_CONFIG, value); -} - static struct lm85_data *lm85_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); -- GitLab From bc4768eb081a67642c0c44c34ea597c273bdedcb Mon Sep 17 00:00:00 2001 From: Julius Volz Date: Thu, 31 Jul 2008 20:45:24 -0700 Subject: [PATCH 0513/1024] ipvs: Move userspace definitions to include/linux/ip_vs.h Current versions of ipvsadm include "/usr/src/linux/include/net/ip_vs.h" directly. This file also contains kernel-only definitions. Normally, public definitions should live in include/linux, so this patch moves the definitions shared with userspace to a new file, "include/linux/ip_vs.h". This also removes the unused NFC_IPVS_PROPERTY bitmask, which was once used to point into skb->nfcache. To make old ipvsadms still compile with this, the old header file includes the new one. Thanks to Dave Miller and Horms for noting/adding the missing Kbuild entry for the new header file. Signed-off-by: Julius Volz Acked-by: Simon Horman Signed-off-by: David S. Miller --- include/linux/Kbuild | 1 + include/linux/ip_vs.h | 245 ++++++++++++++++++++++++++++++++++++++++ include/net/ip_vs.h | 253 ++---------------------------------------- 3 files changed, 254 insertions(+), 245 deletions(-) create mode 100644 include/linux/ip_vs.h diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 4c4142c5aa6..a26f565e818 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -97,6 +97,7 @@ header-y += ioctl.h header-y += ip6_tunnel.h header-y += ipmi_msgdefs.h header-y += ipsec.h +header-y += ip_vs.h header-y += ipx.h header-y += irda.h header-y += iso_fs.h diff --git a/include/linux/ip_vs.h b/include/linux/ip_vs.h new file mode 100644 index 00000000000..ec6eb49af2d --- /dev/null +++ b/include/linux/ip_vs.h @@ -0,0 +1,245 @@ +/* + * IP Virtual Server + * data structure and functionality definitions + */ + +#ifndef _IP_VS_H +#define _IP_VS_H + +#include /* For __beXX types in userland */ + +#define IP_VS_VERSION_CODE 0x010201 +#define NVERSION(version) \ + (version >> 16) & 0xFF, \ + (version >> 8) & 0xFF, \ + version & 0xFF + +/* + * Virtual Service Flags + */ +#define IP_VS_SVC_F_PERSISTENT 0x0001 /* persistent port */ +#define IP_VS_SVC_F_HASHED 0x0002 /* hashed entry */ + +/* + * Destination Server Flags + */ +#define IP_VS_DEST_F_AVAILABLE 0x0001 /* server is available */ +#define IP_VS_DEST_F_OVERLOAD 0x0002 /* server is overloaded */ + +/* + * IPVS sync daemon states + */ +#define IP_VS_STATE_NONE 0x0000 /* daemon is stopped */ +#define IP_VS_STATE_MASTER 0x0001 /* started as master */ +#define IP_VS_STATE_BACKUP 0x0002 /* started as backup */ + +/* + * IPVS socket options + */ +#define IP_VS_BASE_CTL (64+1024+64) /* base */ + +#define IP_VS_SO_SET_NONE IP_VS_BASE_CTL /* just peek */ +#define IP_VS_SO_SET_INSERT (IP_VS_BASE_CTL+1) +#define IP_VS_SO_SET_ADD (IP_VS_BASE_CTL+2) +#define IP_VS_SO_SET_EDIT (IP_VS_BASE_CTL+3) +#define IP_VS_SO_SET_DEL (IP_VS_BASE_CTL+4) +#define IP_VS_SO_SET_FLUSH (IP_VS_BASE_CTL+5) +#define IP_VS_SO_SET_LIST (IP_VS_BASE_CTL+6) +#define IP_VS_SO_SET_ADDDEST (IP_VS_BASE_CTL+7) +#define IP_VS_SO_SET_DELDEST (IP_VS_BASE_CTL+8) +#define IP_VS_SO_SET_EDITDEST (IP_VS_BASE_CTL+9) +#define IP_VS_SO_SET_TIMEOUT (IP_VS_BASE_CTL+10) +#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11) +#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12) +#define IP_VS_SO_SET_RESTORE (IP_VS_BASE_CTL+13) +#define IP_VS_SO_SET_SAVE (IP_VS_BASE_CTL+14) +#define IP_VS_SO_SET_ZERO (IP_VS_BASE_CTL+15) +#define IP_VS_SO_SET_MAX IP_VS_SO_SET_ZERO + +#define IP_VS_SO_GET_VERSION IP_VS_BASE_CTL +#define IP_VS_SO_GET_INFO (IP_VS_BASE_CTL+1) +#define IP_VS_SO_GET_SERVICES (IP_VS_BASE_CTL+2) +#define IP_VS_SO_GET_SERVICE (IP_VS_BASE_CTL+3) +#define IP_VS_SO_GET_DESTS (IP_VS_BASE_CTL+4) +#define IP_VS_SO_GET_DEST (IP_VS_BASE_CTL+5) /* not used now */ +#define IP_VS_SO_GET_TIMEOUT (IP_VS_BASE_CTL+6) +#define IP_VS_SO_GET_DAEMON (IP_VS_BASE_CTL+7) +#define IP_VS_SO_GET_MAX IP_VS_SO_GET_DAEMON + + +/* + * IPVS Connection Flags + */ +#define IP_VS_CONN_F_FWD_MASK 0x0007 /* mask for the fwd methods */ +#define IP_VS_CONN_F_MASQ 0x0000 /* masquerading/NAT */ +#define IP_VS_CONN_F_LOCALNODE 0x0001 /* local node */ +#define IP_VS_CONN_F_TUNNEL 0x0002 /* tunneling */ +#define IP_VS_CONN_F_DROUTE 0x0003 /* direct routing */ +#define IP_VS_CONN_F_BYPASS 0x0004 /* cache bypass */ +#define IP_VS_CONN_F_SYNC 0x0020 /* entry created by sync */ +#define IP_VS_CONN_F_HASHED 0x0040 /* hashed entry */ +#define IP_VS_CONN_F_NOOUTPUT 0x0080 /* no output packets */ +#define IP_VS_CONN_F_INACTIVE 0x0100 /* not established */ +#define IP_VS_CONN_F_OUT_SEQ 0x0200 /* must do output seq adjust */ +#define IP_VS_CONN_F_IN_SEQ 0x0400 /* must do input seq adjust */ +#define IP_VS_CONN_F_SEQ_MASK 0x0600 /* in/out sequence mask */ +#define IP_VS_CONN_F_NO_CPORT 0x0800 /* no client port set yet */ +#define IP_VS_CONN_F_TEMPLATE 0x1000 /* template, not connection */ + +#define IP_VS_SCHEDNAME_MAXLEN 16 +#define IP_VS_IFNAME_MAXLEN 16 + + +/* + * The struct ip_vs_service_user and struct ip_vs_dest_user are + * used to set IPVS rules through setsockopt. + */ +struct ip_vs_service_user { + /* virtual service addresses */ + u_int16_t protocol; + __be32 addr; /* virtual ip address */ + __be16 port; + u_int32_t fwmark; /* firwall mark of service */ + + /* virtual service options */ + char sched_name[IP_VS_SCHEDNAME_MAXLEN]; + unsigned flags; /* virtual service flags */ + unsigned timeout; /* persistent timeout in sec */ + __be32 netmask; /* persistent netmask */ +}; + + +struct ip_vs_dest_user { + /* destination server address */ + __be32 addr; + __be16 port; + + /* real server options */ + unsigned conn_flags; /* connection flags */ + int weight; /* destination weight */ + + /* thresholds for active connections */ + u_int32_t u_threshold; /* upper threshold */ + u_int32_t l_threshold; /* lower threshold */ +}; + + +/* + * IPVS statistics object (for user space) + */ +struct ip_vs_stats_user +{ + __u32 conns; /* connections scheduled */ + __u32 inpkts; /* incoming packets */ + __u32 outpkts; /* outgoing packets */ + __u64 inbytes; /* incoming bytes */ + __u64 outbytes; /* outgoing bytes */ + + __u32 cps; /* current connection rate */ + __u32 inpps; /* current in packet rate */ + __u32 outpps; /* current out packet rate */ + __u32 inbps; /* current in byte rate */ + __u32 outbps; /* current out byte rate */ +}; + + +/* The argument to IP_VS_SO_GET_INFO */ +struct ip_vs_getinfo { + /* version number */ + unsigned int version; + + /* size of connection hash table */ + unsigned int size; + + /* number of virtual services */ + unsigned int num_services; +}; + + +/* The argument to IP_VS_SO_GET_SERVICE */ +struct ip_vs_service_entry { + /* which service: user fills in these */ + u_int16_t protocol; + __be32 addr; /* virtual address */ + __be16 port; + u_int32_t fwmark; /* firwall mark of service */ + + /* service options */ + char sched_name[IP_VS_SCHEDNAME_MAXLEN]; + unsigned flags; /* virtual service flags */ + unsigned timeout; /* persistent timeout */ + __be32 netmask; /* persistent netmask */ + + /* number of real servers */ + unsigned int num_dests; + + /* statistics */ + struct ip_vs_stats_user stats; +}; + + +struct ip_vs_dest_entry { + __be32 addr; /* destination address */ + __be16 port; + unsigned conn_flags; /* connection flags */ + int weight; /* destination weight */ + + u_int32_t u_threshold; /* upper threshold */ + u_int32_t l_threshold; /* lower threshold */ + + u_int32_t activeconns; /* active connections */ + u_int32_t inactconns; /* inactive connections */ + u_int32_t persistconns; /* persistent connections */ + + /* statistics */ + struct ip_vs_stats_user stats; +}; + + +/* The argument to IP_VS_SO_GET_DESTS */ +struct ip_vs_get_dests { + /* which service: user fills in these */ + u_int16_t protocol; + __be32 addr; /* virtual address */ + __be16 port; + u_int32_t fwmark; /* firwall mark of service */ + + /* number of real servers */ + unsigned int num_dests; + + /* the real servers */ + struct ip_vs_dest_entry entrytable[0]; +}; + + +/* The argument to IP_VS_SO_GET_SERVICES */ +struct ip_vs_get_services { + /* number of virtual services */ + unsigned int num_services; + + /* service table */ + struct ip_vs_service_entry entrytable[0]; +}; + + +/* The argument to IP_VS_SO_GET_TIMEOUT */ +struct ip_vs_timeout_user { + int tcp_timeout; + int tcp_fin_timeout; + int udp_timeout; +}; + + +/* The argument to IP_VS_SO_GET_DAEMON */ +struct ip_vs_daemon_user { + /* sync daemon state (master/backup) */ + int state; + + /* multicast interface name */ + char mcast_ifn[IP_VS_IFNAME_MAXLEN]; + + /* SyncID we belong to */ + int syncid; +}; + +#endif /* _IP_VS_H */ diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 9a51ebad3f1..cbb59ebed4a 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -3,254 +3,17 @@ * data structure and functionality definitions */ -#ifndef _IP_VS_H -#define _IP_VS_H - -#include /* For __uXX types */ -#include /* For __beXX types in userland */ - -#include /* For ctl_path */ - -#define IP_VS_VERSION_CODE 0x010201 -#define NVERSION(version) \ - (version >> 16) & 0xFF, \ - (version >> 8) & 0xFF, \ - version & 0xFF - -/* - * Virtual Service Flags - */ -#define IP_VS_SVC_F_PERSISTENT 0x0001 /* persistent port */ -#define IP_VS_SVC_F_HASHED 0x0002 /* hashed entry */ - -/* - * Destination Server Flags - */ -#define IP_VS_DEST_F_AVAILABLE 0x0001 /* server is available */ -#define IP_VS_DEST_F_OVERLOAD 0x0002 /* server is overloaded */ - -/* - * IPVS sync daemon states - */ -#define IP_VS_STATE_NONE 0x0000 /* daemon is stopped */ -#define IP_VS_STATE_MASTER 0x0001 /* started as master */ -#define IP_VS_STATE_BACKUP 0x0002 /* started as backup */ - -/* - * IPVS socket options - */ -#define IP_VS_BASE_CTL (64+1024+64) /* base */ - -#define IP_VS_SO_SET_NONE IP_VS_BASE_CTL /* just peek */ -#define IP_VS_SO_SET_INSERT (IP_VS_BASE_CTL+1) -#define IP_VS_SO_SET_ADD (IP_VS_BASE_CTL+2) -#define IP_VS_SO_SET_EDIT (IP_VS_BASE_CTL+3) -#define IP_VS_SO_SET_DEL (IP_VS_BASE_CTL+4) -#define IP_VS_SO_SET_FLUSH (IP_VS_BASE_CTL+5) -#define IP_VS_SO_SET_LIST (IP_VS_BASE_CTL+6) -#define IP_VS_SO_SET_ADDDEST (IP_VS_BASE_CTL+7) -#define IP_VS_SO_SET_DELDEST (IP_VS_BASE_CTL+8) -#define IP_VS_SO_SET_EDITDEST (IP_VS_BASE_CTL+9) -#define IP_VS_SO_SET_TIMEOUT (IP_VS_BASE_CTL+10) -#define IP_VS_SO_SET_STARTDAEMON (IP_VS_BASE_CTL+11) -#define IP_VS_SO_SET_STOPDAEMON (IP_VS_BASE_CTL+12) -#define IP_VS_SO_SET_RESTORE (IP_VS_BASE_CTL+13) -#define IP_VS_SO_SET_SAVE (IP_VS_BASE_CTL+14) -#define IP_VS_SO_SET_ZERO (IP_VS_BASE_CTL+15) -#define IP_VS_SO_SET_MAX IP_VS_SO_SET_ZERO - -#define IP_VS_SO_GET_VERSION IP_VS_BASE_CTL -#define IP_VS_SO_GET_INFO (IP_VS_BASE_CTL+1) -#define IP_VS_SO_GET_SERVICES (IP_VS_BASE_CTL+2) -#define IP_VS_SO_GET_SERVICE (IP_VS_BASE_CTL+3) -#define IP_VS_SO_GET_DESTS (IP_VS_BASE_CTL+4) -#define IP_VS_SO_GET_DEST (IP_VS_BASE_CTL+5) /* not used now */ -#define IP_VS_SO_GET_TIMEOUT (IP_VS_BASE_CTL+6) -#define IP_VS_SO_GET_DAEMON (IP_VS_BASE_CTL+7) -#define IP_VS_SO_GET_MAX IP_VS_SO_GET_DAEMON - - -/* - * IPVS Connection Flags - */ -#define IP_VS_CONN_F_FWD_MASK 0x0007 /* mask for the fwd methods */ -#define IP_VS_CONN_F_MASQ 0x0000 /* masquerading/NAT */ -#define IP_VS_CONN_F_LOCALNODE 0x0001 /* local node */ -#define IP_VS_CONN_F_TUNNEL 0x0002 /* tunneling */ -#define IP_VS_CONN_F_DROUTE 0x0003 /* direct routing */ -#define IP_VS_CONN_F_BYPASS 0x0004 /* cache bypass */ -#define IP_VS_CONN_F_SYNC 0x0020 /* entry created by sync */ -#define IP_VS_CONN_F_HASHED 0x0040 /* hashed entry */ -#define IP_VS_CONN_F_NOOUTPUT 0x0080 /* no output packets */ -#define IP_VS_CONN_F_INACTIVE 0x0100 /* not established */ -#define IP_VS_CONN_F_OUT_SEQ 0x0200 /* must do output seq adjust */ -#define IP_VS_CONN_F_IN_SEQ 0x0400 /* must do input seq adjust */ -#define IP_VS_CONN_F_SEQ_MASK 0x0600 /* in/out sequence mask */ -#define IP_VS_CONN_F_NO_CPORT 0x0800 /* no client port set yet */ -#define IP_VS_CONN_F_TEMPLATE 0x1000 /* template, not connection */ - -/* Move it to better place one day, for now keep it unique */ -#define NFC_IPVS_PROPERTY 0x10000 - -#define IP_VS_SCHEDNAME_MAXLEN 16 -#define IP_VS_IFNAME_MAXLEN 16 - - -/* - * The struct ip_vs_service_user and struct ip_vs_dest_user are - * used to set IPVS rules through setsockopt. - */ -struct ip_vs_service_user { - /* virtual service addresses */ - u_int16_t protocol; - __be32 addr; /* virtual ip address */ - __be16 port; - u_int32_t fwmark; /* firwall mark of service */ - - /* virtual service options */ - char sched_name[IP_VS_SCHEDNAME_MAXLEN]; - unsigned flags; /* virtual service flags */ - unsigned timeout; /* persistent timeout in sec */ - __be32 netmask; /* persistent netmask */ -}; - - -struct ip_vs_dest_user { - /* destination server address */ - __be32 addr; - __be16 port; - - /* real server options */ - unsigned conn_flags; /* connection flags */ - int weight; /* destination weight */ - - /* thresholds for active connections */ - u_int32_t u_threshold; /* upper threshold */ - u_int32_t l_threshold; /* lower threshold */ -}; - - -/* - * IPVS statistics object (for user space) - */ -struct ip_vs_stats_user -{ - __u32 conns; /* connections scheduled */ - __u32 inpkts; /* incoming packets */ - __u32 outpkts; /* outgoing packets */ - __u64 inbytes; /* incoming bytes */ - __u64 outbytes; /* outgoing bytes */ - - __u32 cps; /* current connection rate */ - __u32 inpps; /* current in packet rate */ - __u32 outpps; /* current out packet rate */ - __u32 inbps; /* current in byte rate */ - __u32 outbps; /* current out byte rate */ -}; - - -/* The argument to IP_VS_SO_GET_INFO */ -struct ip_vs_getinfo { - /* version number */ - unsigned int version; - - /* size of connection hash table */ - unsigned int size; - - /* number of virtual services */ - unsigned int num_services; -}; - - -/* The argument to IP_VS_SO_GET_SERVICE */ -struct ip_vs_service_entry { - /* which service: user fills in these */ - u_int16_t protocol; - __be32 addr; /* virtual address */ - __be16 port; - u_int32_t fwmark; /* firwall mark of service */ - - /* service options */ - char sched_name[IP_VS_SCHEDNAME_MAXLEN]; - unsigned flags; /* virtual service flags */ - unsigned timeout; /* persistent timeout */ - __be32 netmask; /* persistent netmask */ - - /* number of real servers */ - unsigned int num_dests; - - /* statistics */ - struct ip_vs_stats_user stats; -}; - - -struct ip_vs_dest_entry { - __be32 addr; /* destination address */ - __be16 port; - unsigned conn_flags; /* connection flags */ - int weight; /* destination weight */ - - u_int32_t u_threshold; /* upper threshold */ - u_int32_t l_threshold; /* lower threshold */ - - u_int32_t activeconns; /* active connections */ - u_int32_t inactconns; /* inactive connections */ - u_int32_t persistconns; /* persistent connections */ - - /* statistics */ - struct ip_vs_stats_user stats; -}; - - -/* The argument to IP_VS_SO_GET_DESTS */ -struct ip_vs_get_dests { - /* which service: user fills in these */ - u_int16_t protocol; - __be32 addr; /* virtual address */ - __be16 port; - u_int32_t fwmark; /* firwall mark of service */ - - /* number of real servers */ - unsigned int num_dests; - - /* the real servers */ - struct ip_vs_dest_entry entrytable[0]; -}; - - -/* The argument to IP_VS_SO_GET_SERVICES */ -struct ip_vs_get_services { - /* number of virtual services */ - unsigned int num_services; - - /* service table */ - struct ip_vs_service_entry entrytable[0]; -}; - - -/* The argument to IP_VS_SO_GET_TIMEOUT */ -struct ip_vs_timeout_user { - int tcp_timeout; - int tcp_fin_timeout; - int udp_timeout; -}; - - -/* The argument to IP_VS_SO_GET_DAEMON */ -struct ip_vs_daemon_user { - /* sync daemon state (master/backup) */ - int state; - - /* multicast interface name */ - char mcast_ifn[IP_VS_IFNAME_MAXLEN]; - - /* SyncID we belong to */ - int syncid; -}; +#ifndef _NET_IP_VS_H +#define _NET_IP_VS_H +#include /* definitions shared with userland */ +/* old ipvsadm versions still include this file directly */ #ifdef __KERNEL__ +#include /* for __uXX types */ + +#include /* for ctl_path */ #include /* for struct list_head */ #include /* for struct rwlock_t */ #include /* for struct atomic_t */ @@ -981,4 +744,4 @@ static inline __wsum ip_vs_check_diff2(__be16 old, __be16 new, __wsum oldsum) #endif /* __KERNEL__ */ -#endif /* _IP_VS_H */ +#endif /* _NET_IP_VS_H */ -- GitLab From 77e2f14f71d68d05945f1d30ca55b5194d6ab1ce Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 31 Jul 2008 20:46:47 -0700 Subject: [PATCH 0514/1024] ipv6: Fix ip6_xmit to send fragments if ipfragok is true SCTP used ip6_xmit() to send fragments after received ICMP packet too big message. But while send packet used ip6_xmit, the skb->local_df is not initialized. So when skb if enter ip6_fragment(), the following code will discard the skb. ip6_fragment(...) { if (!skb->local_df) { ... return -EMSGSIZE; } ... } SCTP do the following step: 1. send packet ip6_xmit(skb, ipfragok=0) 2. received ICMP packet too big message 3. if PMTUD_ENABLE: ip6_xmit(skb, ipfragok=1) This patch fixed the problem by set local_df if ipfragok is true. Signed-off-by: Wei Yongjun Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 6811901e6b1..a027003d69a 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -236,6 +236,10 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl, skb_reset_network_header(skb); hdr = ipv6_hdr(skb); + /* Allow local fragmentation. */ + if (ipfragok) + skb->local_df = 1; + /* * Fill in the IPv6 header */ -- GitLab From 90b7e1120bb43ffaabb88d28f80a0c2e13167b15 Mon Sep 17 00:00:00 2001 From: Adam Langley Date: Thu, 31 Jul 2008 20:49:48 -0700 Subject: [PATCH 0515/1024] tcp: MD5: Fix MD5 signatures on certain ACK packets I noticed, looking at tcpdumps, that timewait ACKs were getting sent with an incorrect MD5 signature when signatures were enabled. I broke this in 49a72dfb8814c2d65bd9f8c9c6daf6395a1ec58d ("tcp: Fix MD5 signatures for non-linear skbs"). I didn't take into account that the skb passed to tcp_*_send_ack was the inbound packet, thus the source and dest addresses need to be swapped when calculating the MD5 pseudoheader. Signed-off-by: Adam Langley Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 4 ++-- net/ipv6/tcp_ipv6.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index b3875c0d83c..91a8cfddf1c 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -655,8 +655,8 @@ static void tcp_v4_send_ack(struct sk_buff *skb, u32 seq, u32 ack, rep.th.doff = arg.iov[0].iov_len/4; tcp_v4_md5_hash_hdr((__u8 *) &rep.opt[offset], - key, ip_hdr(skb)->daddr, - ip_hdr(skb)->saddr, &rep.th); + key, ip_hdr(skb)->saddr, + ip_hdr(skb)->daddr, &rep.th); } #endif arg.csum = csum_tcpudp_nofold(ip_hdr(skb)->daddr, diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 1db45216b23..1bcdcbc71d6 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1094,8 +1094,8 @@ static void tcp_v6_send_ack(struct sk_buff *skb, u32 seq, u32 ack, u32 win, u32 *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG); tcp_v6_md5_hash_hdr((__u8 *)topt, key, - &ipv6_hdr(skb)->daddr, - &ipv6_hdr(skb)->saddr, t1); + &ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, t1); } #endif -- GitLab From 47d715af0761012ab074a12b5b5959f0179eaa09 Mon Sep 17 00:00:00 2001 From: "Mark M. Hoffman" Date: Thu, 31 Jul 2008 23:48:25 -0400 Subject: [PATCH 0516/1024] hwmon: needs new maintainer Signed-off-by: Mark M. Hoffman --- MAINTAINERS | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 56a2f678019..d526be327a8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1819,13 +1819,9 @@ W: http://gigaset307x.sourceforge.net/ S: Maintained HARDWARE MONITORING -P: Mark M. Hoffman -M: mhoffman@lightlink.com L: lm-sensors@lm-sensors.org W: http://www.lm-sensors.org/ -T: git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git testing -T: git lm-sensors.org:/kernel/mhoffman/hwmon-2.6.git release -S: Maintained +S: Orphaned HARDWARE RANDOM NUMBER GENERATOR CORE S: Orphaned -- GitLab From 8a9204db665365354b349ed5b0bc054f0433a2a4 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 31 Jul 2008 20:51:22 -0700 Subject: [PATCH 0517/1024] net/ipv4/route.c: fix build error fix: net/ipv4/route.c: In function 'ip_static_sysctl_init': net/ipv4/route.c:3225: error: 'ipv4_route_path' undeclared (first use in this function) net/ipv4/route.c:3225: error: (Each undeclared identifier is reported only once net/ipv4/route.c:3225: error: for each function it appears in.) net/ipv4/route.c:3225: error: 'ipv4_route_table' undeclared (first use in this function) Signed-off-by: Ingo Molnar Signed-off-by: David S. Miller --- net/ipv4/route.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 380d6474cf6..d7bf0564b5f 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -3222,7 +3222,9 @@ int __init ip_rt_init(void) */ void __init ip_static_sysctl_init(void) { +#ifdef CONFIG_SYSCTL register_sysctl_paths(ipv4_route_path, ipv4_route_table); +#endif } EXPORT_SYMBOL(__ip_select_ident); -- GitLab From 4a7b61d23505854dff7d04cc11944566cffdd0ee Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 31 Jul 2008 20:52:08 -0700 Subject: [PATCH 0518/1024] skbuff: add missing kernel-doc for do_not_encrypt Add missing kernel-doc notation to sk_buff: Warning(linux-2.6.27-rc1-git2//include/linux/skbuff.h:345): No description found for parameter 'do_not_encrypt' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- include/linux/skbuff.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index a640385e059..cfcc45b3bef 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -243,6 +243,7 @@ typedef unsigned char *sk_buff_data_t; * @tc_index: Traffic control index * @tc_verd: traffic control verdict * @ndisc_nodetype: router type (from link layer) + * @do_not_encrypt: set to prevent encryption of this frame * @dma_cookie: a cookie to one of several possible DMA operations * done by skb DMA functions * @secmark: security marking -- GitLab From 00b1304c4ca81dd893973cc620b87a5c3ff3f660 Mon Sep 17 00:00:00 2001 From: Adam Langley Date: Thu, 31 Jul 2008 21:36:07 -0700 Subject: [PATCH 0519/1024] tcp: MD5: Fix IPv6 signatures Reported by Stefanos Harhalakis; although 2.6.27-rc1 talks to itself using IPv6 TCP MD5 packets just fine, Stefanos noted that tcpdump claimed that the signatures were invalid. I broke this in 49a72dfb8814c2d65bd9f8c9c6daf6395a1ec58d ("tcp: Fix MD5 signatures for non-linear skbs"), it was just a typo. Note that tcpdump will still sometimes claim that the signatures are incorrect. A patch to tcpdump has been submitted for this[1]. [1] http://tinyurl.com/6a4fl2 Signed-off-by: Adam Langley Signed-off-by: David S. Miller --- net/ipv6/tcp_ipv6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 1bcdcbc71d6..78185a40921 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -748,7 +748,7 @@ static int tcp_v6_md5_hash_pseudoheader(struct tcp_md5sig_pool *hp, ipv6_addr_copy(&bp->saddr, saddr); ipv6_addr_copy(&bp->daddr, daddr); bp->protocol = cpu_to_be32(IPPROTO_TCP); - bp->len = cpu_to_be16(nbytes); + bp->len = cpu_to_be32(nbytes); sg_init_one(&sg, bp, sizeof(*bp)); return crypto_hash_update(&hp->md5_desc, &sg, sizeof(*bp)); -- GitLab From f6ed6f78d46b43b6d908b39ed3322f7cda23f4a8 Mon Sep 17 00:00:00 2001 From: Pieter du Preez Date: Fri, 1 Aug 2008 10:06:40 +0100 Subject: [PATCH 0520/1024] Fix rename of at91_nand -> atmel_nand Structs called at91_nand_data where renamed to atmel_nand_data and configs called *MTD_NAND_AT91* where renamed to *MTD_NAND_ATMEL*. This was unfortunately not done consistently, causing NAND chips not being initialised on several ARM boards. I am aware that the author of the original change did not rename MTD_NAND_AT91_BUSWIDTH to MTD_NAND_ATMEL_BUSWIDTH, for example. All *MTD_NAND_AT91* where renamed to *MTD_NAND_ATMEL* in order to keep naming consistency. This patch was only tested on a MACH_SAM9_L9260, as this is the only ARM board I have to my disposal. Before this patch: $ git-ls-files |xargs grep atmel_nand |wc -l 105 $ git-ls-files |xargs grep at91_nand |wc -l 4 $ git-ls-files |xargs grep MTD_NAND_ATMEL |wc -l 8 $ git-ls-files |xargs grep MTD_NAND_AT91 |wc -l 47 After this patch: $ git-ls-files |xargs grep atmel_nand |wc -l 109 $ git-ls-files |xargs grep at91_nand |wc -l 0 $ git-ls-files |xargs grep MTD_NAND_ATMEL |wc -l 55 $ git-ls-files |xargs grep MTD_NAND_AT91 |wc -l 0 Signed-off-by: Pieter du Preez Signed-off-by: David Woodhouse --- arch/arm/configs/at91cap9adk_defconfig | 4 ++-- arch/arm/configs/at91sam9260ek_defconfig | 2 +- arch/arm/configs/at91sam9261ek_defconfig | 4 ++-- arch/arm/configs/at91sam9263ek_defconfig | 4 ++-- arch/arm/configs/at91sam9g20ek_defconfig | 10 +++++----- arch/arm/configs/at91sam9rlek_defconfig | 2 +- arch/arm/configs/cam60_defconfig | 8 ++++---- arch/arm/configs/qil-a9260_defconfig | 8 ++++---- arch/arm/configs/sam9_l9260_defconfig | 2 +- arch/arm/configs/usb-a9260_defconfig | 8 ++++---- arch/arm/configs/usb-a9263_defconfig | 8 ++++---- arch/arm/configs/yl9200_defconfig | 2 +- arch/arm/mach-at91/Kconfig | 2 +- arch/arm/mach-at91/at91cap9_devices.c | 2 +- arch/arm/mach-at91/at91rm9200_devices.c | 2 +- arch/arm/mach-at91/at91sam9260_devices.c | 2 +- arch/arm/mach-at91/at91sam9261_devices.c | 2 +- arch/arm/mach-at91/at91sam9263_devices.c | 2 +- arch/arm/mach-at91/at91sam9rl_devices.c | 2 +- arch/arm/mach-at91/board-cap9adk.c | 2 +- arch/arm/mach-at91/board-qil-a9260.c | 4 ++-- arch/arm/mach-at91/board-sam9-l9260.c | 2 +- arch/arm/mach-at91/board-sam9260ek.c | 2 +- arch/arm/mach-at91/board-sam9261ek.c | 2 +- arch/arm/mach-at91/board-sam9263ek.c | 2 +- arch/arm/mach-at91/board-sam9g20ek.c | 4 ++-- arch/arm/mach-at91/board-usb-a9260.c | 4 ++-- arch/arm/mach-at91/board-usb-a9263.c | 4 ++-- 28 files changed, 51 insertions(+), 51 deletions(-) diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig index be2b2f38fd9..bf97801a106 100644 --- a/arch/arm/configs/at91cap9adk_defconfig +++ b/arch/arm/configs/at91cap9adk_defconfig @@ -170,7 +170,7 @@ CONFIG_MACH_AT91CAP9ADK=y # AT91 Board Options # CONFIG_MTD_AT91_DATAFLASH_CARD=y -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -442,7 +442,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index 2011adfa675..38e6a0abeb4 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -176,7 +176,7 @@ CONFIG_MACH_AT91SAM9260EK=y # AT91 Board Options # # CONFIG_MTD_AT91_DATAFLASH_CARD is not set -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index 4049768962d..93b779f94b4 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9261EK=y # AT91 Board Options # # CONFIG_MTD_AT91_DATAFLASH_CARD is not set -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -433,7 +433,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig index fa1c5aecb5a..a7ddd94363c 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9263EK=y # AT91 Board Options # CONFIG_MTD_AT91_DATAFLASH_CARD=y -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -428,7 +428,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig index c0686384736..df0d6ee672b 100644 --- a/arch/arm/configs/at91sam9g20ek_defconfig +++ b/arch/arm/configs/at91sam9g20ek_defconfig @@ -168,7 +168,7 @@ CONFIG_MACH_AT91SAM9G20EK=y # AT91 Board Options # # CONFIG_MTD_AT91_DATAFLASH_CARD is not set -# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set +# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set # # AT91 Feature Selections @@ -442,10 +442,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig index d8ec5f9ca6e..1c76642272a 100644 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ b/arch/arm/configs/at91sam9rlek_defconfig @@ -392,7 +392,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ONENAND is not set diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig index f3cd4a95373..f945105d6cd 100644 --- a/arch/arm/configs/cam60_defconfig +++ b/arch/arm/configs/cam60_defconfig @@ -466,10 +466,10 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -# CONFIG_MTD_NAND_AT91_ECC_SOFT is not set -CONFIG_MTD_NAND_AT91_ECC_HW=y -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set +CONFIG_MTD_NAND_ATMEL_ECC_HW=y +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig index ef903bed061..5cbd8158964 100644 --- a/arch/arm/configs/qil-a9260_defconfig +++ b/arch/arm/configs/qil-a9260_defconfig @@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig index 8688362bcf7..1174e276487 100644 --- a/arch/arm/configs/sam9_l9260_defconfig +++ b/arch/arm/configs/sam9_l9260_defconfig @@ -429,7 +429,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set CONFIG_MTD_NAND_PLATFORM=y # CONFIG_MTD_ONENAND is not set diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig index 3680bd2df26..fcb4aaabd43 100644 --- a/arch/arm/configs/usb-a9260_defconfig +++ b/arch/arm/configs/usb-a9260_defconfig @@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig index 48d455bc736..b786e0407e8 100644 --- a/arch/arm/configs/usb-a9263_defconfig +++ b/arch/arm/configs/usb-a9263_defconfig @@ -450,10 +450,10 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set -CONFIG_MTD_NAND_AT91=y -CONFIG_MTD_NAND_AT91_ECC_SOFT=y -# CONFIG_MTD_NAND_AT91_ECC_HW is not set -# CONFIG_MTD_NAND_AT91_ECC_NONE is not set +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set +# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig index 26de37f7468..a9f41c24c9d 100644 --- a/arch/arm/configs/yl9200_defconfig +++ b/arch/arm/configs/yl9200_defconfig @@ -421,7 +421,7 @@ CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_AT91=y +CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_NANDSIM is not set CONFIG_MTD_NAND_PLATFORM=y # CONFIG_MTD_ALAUDA is not set diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 5bad6b9b00d..a048b92cb40 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -297,7 +297,7 @@ config MTD_AT91_DATAFLASH_CARD help Enable support for the DataFlash card. -config MTD_NAND_AT91_BUSWIDTH_16 +config MTD_NAND_ATMEL_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK) help diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index dc8b40783d9..25765f1afca 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -376,7 +376,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * NAND / SmartMedia * -------------------------------------------------------------------- */ -#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 8ced9bc8209..d2c5c84bf6b 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -368,7 +368,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * NAND / SmartMedia * -------------------------------------------------------------------- */ -#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index cae5f52f127..f5fec0a9cf4 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -283,7 +283,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * NAND / SmartMedia * -------------------------------------------------------------------- */ -#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 483d436af22..b80860e3138 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -198,7 +198,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * NAND / SmartMedia * -------------------------------------------------------------------- */ -#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 9762b15f658..42108d02f59 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -352,7 +352,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * NAND / SmartMedia * -------------------------------------------------------------------- */ -#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 5f3094870ca..9c61576f1c8 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -194,7 +194,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * NAND / SmartMedia * -------------------------------------------------------------------- */ -#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 117cf6c9afc..1f4725972ed 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -188,7 +188,7 @@ static struct atmel_nand_data __initdata cap9adk_nand_data = { // .rdy_pin = ... not connected .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 99b4ec3818d..33b1ccdb516 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -140,14 +140,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 57a6221943e..3cd5f8d0e2e 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -148,7 +148,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 6a680795c3c..daf93a58806 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -185,7 +185,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 43dfbd0d543..12bf527f93b 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -190,7 +190,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC15, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 6605a098011..63121197f8c 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -194,7 +194,7 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 45617c20124..e0c07952cc3 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -143,13 +143,13 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio } /* det_pin is not connected */ -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 837aedf8ffe..2f4ecac150d 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -114,14 +114,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index 95800d32bd4..0e9649d3eda 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -127,14 +127,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16) +#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) .bus_width_16 = 1, #else .bus_width_16 = 0, -- GitLab From b7600dba6d4fbf3897e517b322d006986cce831a Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 1 Aug 2008 10:07:51 +0100 Subject: [PATCH 0521/1024] [JFFS2] Fix allocation of summary buffer We can't use vmalloc for the buffer we use for writing summaries, because some drivers may want to DMA from it. So limit the size to 64KiB and use kmalloc for it instead. Signed-off-by: David Woodhouse --- fs/jffs2/summary.c | 40 ++++++++++++++++++++++++++-------------- fs/jffs2/summary.h | 6 ++++++ 2 files changed, 32 insertions(+), 14 deletions(-) diff --git a/fs/jffs2/summary.c b/fs/jffs2/summary.c index 629af01e5ad..6caf1e1ee26 100644 --- a/fs/jffs2/summary.c +++ b/fs/jffs2/summary.c @@ -23,6 +23,8 @@ int jffs2_sum_init(struct jffs2_sb_info *c) { + uint32_t sum_size = max_t(uint32_t, c->sector_size, MAX_SUMMARY_SIZE); + c->summary = kzalloc(sizeof(struct jffs2_summary), GFP_KERNEL); if (!c->summary) { @@ -30,7 +32,7 @@ int jffs2_sum_init(struct jffs2_sb_info *c) return -ENOMEM; } - c->summary->sum_buf = vmalloc(c->sector_size); + c->summary->sum_buf = kmalloc(sum_size, GFP_KERNEL); if (!c->summary->sum_buf) { JFFS2_WARNING("Can't allocate buffer for writing out summary information!\n"); @@ -49,7 +51,7 @@ void jffs2_sum_exit(struct jffs2_sb_info *c) jffs2_sum_disable_collecting(c->summary); - vfree(c->summary->sum_buf); + kfree(c->summary->sum_buf); c->summary->sum_buf = NULL; kfree(c->summary); @@ -665,7 +667,7 @@ crc_err: /* Write summary data to flash - helper function for jffs2_sum_write_sumnode() */ static int jffs2_sum_write_data(struct jffs2_sb_info *c, struct jffs2_eraseblock *jeb, - uint32_t infosize, uint32_t datasize, int padsize) + uint32_t infosize, uint32_t datasize, int padsize) { struct jffs2_raw_summary isum; union jffs2_sum_mem *temp; @@ -676,6 +678,26 @@ static int jffs2_sum_write_data(struct jffs2_sb_info *c, struct jffs2_eraseblock int ret; size_t retlen; + if (padsize + datasize > MAX_SUMMARY_SIZE) { + /* It won't fit in the buffer. Abort summary for this jeb */ + jffs2_sum_disable_collecting(c->summary); + + JFFS2_WARNING("Summary too big (%d data, %d pad) in eraseblock at %08x\n", + datasize, padsize, jeb->offset); + /* Non-fatal */ + return 0; + } + /* Is there enough space for summary? */ + if (padsize < 0) { + /* don't try to write out summary for this jeb */ + jffs2_sum_disable_collecting(c->summary); + + JFFS2_WARNING("Not enough space for summary, padsize = %d\n", + padsize); + /* Non-fatal */ + return 0; + } + memset(c->summary->sum_buf, 0xff, datasize); memset(&isum, 0, sizeof(isum)); @@ -821,7 +843,7 @@ int jffs2_sum_write_sumnode(struct jffs2_sb_info *c) { int datasize, infosize, padsize; struct jffs2_eraseblock *jeb; - int ret; + int ret = 0; dbg_summary("called\n"); @@ -841,16 +863,6 @@ int jffs2_sum_write_sumnode(struct jffs2_sb_info *c) infosize += padsize; datasize += padsize; - /* Is there enough space for summary? */ - if (padsize < 0) { - /* don't try to write out summary for this jeb */ - jffs2_sum_disable_collecting(c->summary); - - JFFS2_WARNING("Not enough space for summary, padsize = %d\n", padsize); - spin_lock(&c->erase_completion_lock); - return 0; - } - ret = jffs2_sum_write_data(c, jeb, infosize, datasize, padsize); spin_lock(&c->erase_completion_lock); return ret; diff --git a/fs/jffs2/summary.h b/fs/jffs2/summary.h index 8bf34f2fa5c..60207a2ae95 100644 --- a/fs/jffs2/summary.h +++ b/fs/jffs2/summary.h @@ -13,6 +13,12 @@ #ifndef JFFS2_SUMMARY_H #define JFFS2_SUMMARY_H +/* Limit summary size to 64KiB so that we can kmalloc it. If the summary + is larger than that, we have to just ditch it and avoid using summary + for the eraseblock in question... and it probably doesn't hurt us much + anyway. */ +#define MAX_SUMMARY_SIZE 65536 + #include #include -- GitLab From 5f5ddfb3605d2a4f555a7ff034859e623eafcd27 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 1 Aug 2008 08:39:34 -0500 Subject: [PATCH 0522/1024] kgdb: remove the requirement for CONFIG_FRAME_POINTER There is no technical reason that the kgdb core requires frame pointers. It is up to the end user of KGDB to decide if they need them or not. [ anemo@mba.ocn.ne.jp: removed frame pointers on mips ] Signed-off-by: Jason Wessel --- Documentation/DocBook/kgdb.tmpl | 8 ++++++++ lib/Kconfig.kgdb | 11 +++++++---- 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index e8acd1f0345..54d3b158d08 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -98,6 +98,14 @@ "Kernel debugging" select "KGDB: kernel debugging with remote gdb". + It is advised, but not required that you turn on the + CONFIG_FRAME_POINTER kernel option. This option inserts code to + into the compiled executable which saves the frame information in + registers or on the stack at different points which will allow a + debugger such as gdb to more accurately construct stack back traces + while debugging the kernel. + + Next you should choose one of more I/O drivers to interconnect debugging host and debugged target. Early boot debugging requires a KGDB I/O driver that supports early debugging and the driver must be diff --git a/lib/Kconfig.kgdb b/lib/Kconfig.kgdb index 2cfd2721f7e..9b5d1d7f2ef 100644 --- a/lib/Kconfig.kgdb +++ b/lib/Kconfig.kgdb @@ -4,14 +4,17 @@ config HAVE_ARCH_KGDB menuconfig KGDB bool "KGDB: kernel debugging with remote gdb" - select FRAME_POINTER depends on HAVE_ARCH_KGDB depends on DEBUG_KERNEL && EXPERIMENTAL help If you say Y here, it will be possible to remotely debug the - kernel using gdb. Documentation of kernel debugger is available - at http://kgdb.sourceforge.net as well as in DocBook form - in Documentation/DocBook/. If unsure, say N. + kernel using gdb. It is recommended but not required, that + you also turn on the kernel config option + CONFIG_FRAME_POINTER to aid in producing more reliable stack + backtraces in the external debugger. Documentation of + kernel debugger is available at http://kgdb.sourceforge.net + as well as in DocBook form in Documentation/DocBook/. If + unsure, say N. if KGDB -- GitLab From a9b60bf4c29e07a5a2f26a6f74937972fee9b58b Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 1 Aug 2008 08:39:34 -0500 Subject: [PATCH 0523/1024] kgdb: fix kgdb_validate_break_address to perform a mem write A regression to the kgdb core was found in the case of using the CONFIG_DEBUG_RODATA kernel option. When this option is on, a breakpoint cannot be written into any readonly memory page. When an external debugger requests a breakpoint to get set, the kgdb_validate_break_address() was only checking to see if the address to place the breakpoint was readable and lacked a write check. This patch changes the validate routine to try reading (via the breakpoint set request) and also to try immediately writing the break point. If either fails, an error is correctly returned and the debugger behaves correctly. Then an end user can make the descision to use hardware breakpoints. Also update the documentation to reflect that using CONFIG_DEBUG_RODATA will inhibit the use of software breakpoints. Signed-off-by: Jason Wessel --- Documentation/DocBook/kgdb.tmpl | 10 ++++++++++ kernel/kgdb.c | 26 +++++++++++++++++++------- 2 files changed, 29 insertions(+), 7 deletions(-) diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index 54d3b158d08..372dec20c8d 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -106,6 +106,16 @@ while debugging the kernel. + If the architecture that you are using supports the kernel option + CONFIG_DEBUG_RODATA, you should consider turning it off. This + option will prevent the use of software breakpoints because it + marks certain regions of the kernel's memory space as read-only. + If kgdb supports it for the architecture you are using, you can + use hardware breakpoints if you desire to run with the + CONFIG_DEBUG_RODATA option turned on, else you need to turn off + this option. + + Next you should choose one of more I/O drivers to interconnect debugging host and debugged target. Early boot debugging requires a KGDB I/O driver that supports early debugging and the driver must be diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 3ec23c3ec97..c0d45b2c4d7 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -166,13 +166,6 @@ early_param("nokgdbroundup", opt_nokgdbroundup); * Weak aliases for breakpoint management, * can be overriden by architectures when needed: */ -int __weak kgdb_validate_break_address(unsigned long addr) -{ - char tmp_variable[BREAK_INSTR_SIZE]; - - return probe_kernel_read(tmp_variable, (char *)addr, BREAK_INSTR_SIZE); -} - int __weak kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) { int err; @@ -191,6 +184,25 @@ int __weak kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) (char *)bundle, BREAK_INSTR_SIZE); } +int __weak kgdb_validate_break_address(unsigned long addr) +{ + char tmp_variable[BREAK_INSTR_SIZE]; + int err; + /* Validate setting the breakpoint and then removing it. In the + * remove fails, the kernel needs to emit a bad message because we + * are deep trouble not being able to put things back the way we + * found them. + */ + err = kgdb_arch_set_breakpoint(addr, tmp_variable); + if (err) + return err; + err = kgdb_arch_remove_breakpoint(addr, tmp_variable); + if (err) + printk(KERN_ERR "KGDB: Critical breakpoint error, kernel " + "memory destroyed at: %lx", addr); + return err; +} + unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs) { return instruction_pointer(regs); -- GitLab From 25fc999913839a45cbb48ac7872e67f7521e7ed9 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Fri, 1 Aug 2008 08:39:35 -0500 Subject: [PATCH 0524/1024] kgdb: fix gdb serial thread queries The command "info threads" did not work correctly with kgdb. It would result in a silent kernel hang if used. This patach addresses several problems. - Fix use of deprecated NR_CPUS - Fix kgdb to not walk linearly through the pid space - Correctly implement shadow pids - Change the threads per query to a #define - Fix kgdb_hex2long to work with negated values The threads 0 and -1 are reserved to represent the current task. That means that CPU 0 will start with a shadow thread id of -2, and CPU 1 will have a shadow thread id of -3, etc... From the debugger you can switch to a shadow thread to see what one of the other cpus was doing, however it is not possible to execute run control operations on any other cpu execept the cpu executing the kgdb_handle_exception(). Signed-off-by: Jason Wessel --- kernel/kgdb.c | 68 +++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 50 insertions(+), 18 deletions(-) diff --git a/kernel/kgdb.c b/kernel/kgdb.c index c0d45b2c4d7..eaa21fc9ad1 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -56,12 +56,14 @@ static int kgdb_break_asap; +#define KGDB_MAX_THREAD_QUERY 17 struct kgdb_state { int ex_vector; int signo; int err_code; int cpu; int pass_exception; + unsigned long thr_query; unsigned long threadid; long kgdb_usethreadid; struct pt_regs *linux_regs; @@ -445,9 +447,14 @@ int kgdb_hex2long(char **ptr, unsigned long *long_val) { int hex_val; int num = 0; + int negate = 0; *long_val = 0; + if (**ptr == '-') { + negate = 1; + (*ptr)++; + } while (**ptr) { hex_val = hex(**ptr); if (hex_val < 0) @@ -458,6 +465,9 @@ int kgdb_hex2long(char **ptr, unsigned long *long_val) (*ptr)++; } + if (negate) + *long_val = -*long_val; + return num; } @@ -527,10 +537,16 @@ static void int_to_threadref(unsigned char *id, int value) static struct task_struct *getthread(struct pt_regs *regs, int tid) { /* - * Non-positive TIDs are remapped idle tasks: + * Non-positive TIDs are remapped to the cpu shadow information */ - if (tid <= 0) - return idle_task(-tid); + if (tid == 0 || tid == -1) + tid = -atomic_read(&kgdb_active) - 2; + if (tid < 0) { + if (kgdb_info[-tid - 2].task) + return kgdb_info[-tid - 2].task; + else + return idle_task(-tid - 2); + } /* * find_task_by_pid_ns() does not take the tasklist lock anymore @@ -737,14 +753,15 @@ setundefined: } /* - * Remap normal tasks to their real PID, idle tasks to -1 ... -NR_CPUs: + * Remap normal tasks to their real PID, + * CPU shadow threads are mapped to -CPU - 2 */ static inline int shadow_pid(int realpid) { if (realpid) return realpid; - return -1-raw_smp_processor_id(); + return -raw_smp_processor_id() - 2; } static char gdbmsgbuf[BUFMAX + 1]; @@ -838,7 +855,7 @@ static void gdb_cmd_getregs(struct kgdb_state *ks) local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo; } else { local_debuggerinfo = NULL; - for (i = 0; i < NR_CPUS; i++) { + for_each_online_cpu(i) { /* * Try to find the task on some other * or possibly this node if we do not @@ -972,10 +989,13 @@ static int gdb_cmd_reboot(struct kgdb_state *ks) /* Handle the 'q' query packets */ static void gdb_cmd_query(struct kgdb_state *ks) { - struct task_struct *thread; + struct task_struct *g; + struct task_struct *p; unsigned char thref[8]; char *ptr; int i; + int cpu; + int finished = 0; switch (remcom_in_buffer[1]) { case 's': @@ -985,22 +1005,34 @@ static void gdb_cmd_query(struct kgdb_state *ks) break; } - if (remcom_in_buffer[1] == 'f') - ks->threadid = 1; - + i = 0; remcom_out_buffer[0] = 'm'; ptr = remcom_out_buffer + 1; - - for (i = 0; i < 17; ks->threadid++) { - thread = getthread(ks->linux_regs, ks->threadid); - if (thread) { - int_to_threadref(thref, ks->threadid); + if (remcom_in_buffer[1] == 'f') { + /* Each cpu is a shadow thread */ + for_each_online_cpu(cpu) { + ks->thr_query = 0; + int_to_threadref(thref, -cpu - 2); pack_threadid(ptr, thref); ptr += BUF_THREAD_ID_SIZE; *(ptr++) = ','; i++; } } + + do_each_thread(g, p) { + if (i >= ks->thr_query && !finished) { + int_to_threadref(thref, p->pid); + pack_threadid(ptr, thref); + ptr += BUF_THREAD_ID_SIZE; + *(ptr++) = ','; + ks->thr_query++; + if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0) + finished = 1; + } + i++; + } while_each_thread(g, p); + *(--ptr) = '\0'; break; @@ -1023,15 +1055,15 @@ static void gdb_cmd_query(struct kgdb_state *ks) error_packet(remcom_out_buffer, -EINVAL); break; } - if (ks->threadid > 0) { + if ((int)ks->threadid > 0) { kgdb_mem2hex(getthread(ks->linux_regs, ks->threadid)->comm, remcom_out_buffer, 16); } else { static char tmpstr[23 + BUF_THREAD_ID_SIZE]; - sprintf(tmpstr, "Shadow task %d for pid 0", - (int)(-ks->threadid-1)); + sprintf(tmpstr, "shadowCPU%d", + (int)(-ks->threadid - 2)); kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr)); } break; -- GitLab From fc1f397b2c7ef1c9bad58778e4041dfabf20c71c Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 30 Jul 2008 12:34:56 -0700 Subject: [PATCH 0525/1024] [MTD] [NAND] drivers/mtd/nand/nandsim.c needs div64.h drivers/mtd/nand/nandsim.c: In function 'divide': drivers/mtd/nand/nandsim.c:462: error: implicit declaration of function 'do_div' Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/nandsim.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 7428a6c1135..5d08514f553 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include -- GitLab From 963724462a11668185dc67879ea8fe7590973322 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 30 Jul 2008 12:34:57 -0700 Subject: [PATCH 0526/1024] [MTD] [NAND] diskonchip.c fix sparse endian warnings Signed-off-by: Harvey Harrison Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/diskonchip.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 765d4f0f7c8..e4226e02d63 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -1125,9 +1125,9 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio goto out; mh = (struct NFTLMediaHeader *)buf; - mh->NumEraseUnits = le16_to_cpu(mh->NumEraseUnits); - mh->FirstPhysicalEUN = le16_to_cpu(mh->FirstPhysicalEUN); - mh->FormattedSize = le32_to_cpu(mh->FormattedSize); + le16_to_cpus(&mh->NumEraseUnits); + le16_to_cpus(&mh->FirstPhysicalEUN); + le32_to_cpus(&mh->FormattedSize); printk(KERN_INFO " DataOrgID = %s\n" " NumEraseUnits = %d\n" @@ -1235,12 +1235,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift); mh = (struct INFTLMediaHeader *)buf; - mh->NoOfBootImageBlocks = le32_to_cpu(mh->NoOfBootImageBlocks); - mh->NoOfBinaryPartitions = le32_to_cpu(mh->NoOfBinaryPartitions); - mh->NoOfBDTLPartitions = le32_to_cpu(mh->NoOfBDTLPartitions); - mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits); - mh->FormatFlags = le32_to_cpu(mh->FormatFlags); - mh->PercentUsed = le32_to_cpu(mh->PercentUsed); + le32_to_cpus(&mh->NoOfBootImageBlocks); + le32_to_cpus(&mh->NoOfBinaryPartitions); + le32_to_cpus(&mh->NoOfBDTLPartitions); + le32_to_cpus(&mh->BlockMultiplierBits); + le32_to_cpus(&mh->FormatFlags); + le32_to_cpus(&mh->PercentUsed); printk(KERN_INFO " bootRecordID = %s\n" " NoOfBootImageBlocks = %d\n" @@ -1277,12 +1277,12 @@ static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partiti /* Scan the partitions */ for (i = 0; (i < 4); i++) { ip = &(mh->Partitions[i]); - ip->virtualUnits = le32_to_cpu(ip->virtualUnits); - ip->firstUnit = le32_to_cpu(ip->firstUnit); - ip->lastUnit = le32_to_cpu(ip->lastUnit); - ip->flags = le32_to_cpu(ip->flags); - ip->spareUnits = le32_to_cpu(ip->spareUnits); - ip->Reserved0 = le32_to_cpu(ip->Reserved0); + le32_to_cpus(&ip->virtualUnits); + le32_to_cpus(&ip->firstUnit); + le32_to_cpus(&ip->lastUnit); + le32_to_cpus(&ip->flags); + le32_to_cpus(&ip->spareUnits); + le32_to_cpus(&ip->Reserved0); printk(KERN_INFO " PARTITION[%d] ->\n" " virtualUnits = %d\n" -- GitLab From c2bb4e5d497823437f0a11d342024ccdc6ff5b0d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:08 +0200 Subject: [PATCH 0527/1024] [S390] Remove last P390 trace. Seems like I forgot this hunk... Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/asm-s390/setup.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h index 4ba14e463e8..2bd9faeb391 100644 --- a/include/asm-s390/setup.h +++ b/include/asm-s390/setup.h @@ -65,7 +65,6 @@ extern unsigned long machine_flags; #define MACHINE_FLAG_VM (1UL << 0) #define MACHINE_FLAG_IEEE (1UL << 1) -#define MACHINE_FLAG_P390 (1UL << 2) #define MACHINE_FLAG_CSP (1UL << 3) #define MACHINE_FLAG_MVPG (1UL << 4) #define MACHINE_FLAG_DIAG44 (1UL << 5) -- GitLab From 4abb08c24b5fa7b6ad0807c07077f0f216f6788b Mon Sep 17 00:00:00 2001 From: Stefan Weinhuber Date: Fri, 1 Aug 2008 16:39:09 +0200 Subject: [PATCH 0528/1024] [S390] dasd: Add support for enhanced VM UID When z/VM provides two virtual devices (minidisks) that reside on the same real device, both will receive the configuration data from the real device and thus get the same uid. To fix this problem, z/VM provides an additional configuration data record that allows to distinguish between minidisks. z/VM APAR VM64273 needs be installed so this fix has an effect. Signed-off-by: Stefan Weinhuber Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_alias.c | 4 +- drivers/s390/block/dasd_devmap.c | 16 ++- drivers/s390/block/dasd_eckd.c | 147 ++++++++++++++++++------ drivers/s390/block/dasd_eckd.h | 184 ++++++++++--------------------- drivers/s390/block/dasd_int.h | 1 + 5 files changed, 189 insertions(+), 163 deletions(-) diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index 2d8df0b3053..20676cdef4a 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -91,7 +91,8 @@ static struct alias_pav_group *_find_group(struct alias_lcu *lcu, else search_unit_addr = uid->base_unit_addr; list_for_each_entry(pos, &lcu->grouplist, group) { - if (pos->uid.base_unit_addr == search_unit_addr) + if (pos->uid.base_unit_addr == search_unit_addr && + !strncmp(pos->uid.vduit, uid->vduit, sizeof(uid->vduit))) return pos; }; return NULL; @@ -332,6 +333,7 @@ static int _add_device_to_lcu(struct alias_lcu *lcu, group->uid.base_unit_addr = uid->real_unit_addr; else group->uid.base_unit_addr = uid->base_unit_addr; + memcpy(group->uid.vduit, uid->vduit, sizeof(uid->vduit)); INIT_LIST_HEAD(&group->group); INIT_LIST_HEAD(&group->baselist); INIT_LIST_HEAD(&group->aliaslist); diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c index d774e79476f..cd3335c1c30 100644 --- a/drivers/s390/block/dasd_devmap.c +++ b/drivers/s390/block/dasd_devmap.c @@ -913,7 +913,8 @@ dasd_vendor_show(struct device *dev, struct device_attribute *attr, char *buf) static DEVICE_ATTR(vendor, 0444, dasd_vendor_show, NULL); #define UID_STRLEN ( /* vendor */ 3 + 1 + /* serial */ 14 + 1 +\ - /* SSID */ 4 + 1 + /* unit addr */ 2 + 1) + /* SSID */ 4 + 1 + /* unit addr */ 2 + 1 +\ + /* vduit */ 32 + 1) static ssize_t dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -945,8 +946,17 @@ dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf) sprintf(ua_string, "%02x", uid->real_unit_addr); break; } - snprintf(uid_string, sizeof(uid_string), "%s.%s.%04x.%s", - uid->vendor, uid->serial, uid->ssid, ua_string); + if (strlen(uid->vduit) > 0) + snprintf(uid_string, sizeof(uid_string), + "%s.%s.%04x.%s.%s", + uid->vendor, uid->serial, + uid->ssid, ua_string, + uid->vduit); + else + snprintf(uid_string, sizeof(uid_string), + "%s.%s.%04x.%s", + uid->vendor, uid->serial, + uid->ssid, ua_string); spin_unlock(&dasd_devmap_lock); return snprintf(buf, PAGE_SIZE, "%s\n", uid_string); } diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 3590fdb5b2f..773b3fe275b 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -313,8 +313,8 @@ static int prefix(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata, int trk, memset(pfxdata, 0, sizeof(*pfxdata)); /* prefix data */ pfxdata->format = 0; - pfxdata->base_address = basepriv->conf_data.ned1.unit_addr; - pfxdata->base_lss = basepriv->conf_data.ned1.ID; + pfxdata->base_address = basepriv->ned->unit_addr; + pfxdata->base_lss = basepriv->ned->ID; pfxdata->validity.define_extend = 1; /* private uid is kept up to date, conf_data may be outdated */ @@ -536,36 +536,40 @@ dasd_eckd_cdl_reclen(int recid) /* * Generate device unique id that specifies the physical device. */ -static int -dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid) +static int dasd_eckd_generate_uid(struct dasd_device *device, + struct dasd_uid *uid) { struct dasd_eckd_private *private; - struct dasd_eckd_confdata *confdata; + int count; private = (struct dasd_eckd_private *) device->private; if (!private) return -ENODEV; - confdata = &private->conf_data; - if (!confdata) + if (!private->ned || !private->gneq) return -ENODEV; memset(uid, 0, sizeof(struct dasd_uid)); - memcpy(uid->vendor, confdata->ned1.HDA_manufacturer, + memcpy(uid->vendor, private->ned->HDA_manufacturer, sizeof(uid->vendor) - 1); EBCASC(uid->vendor, sizeof(uid->vendor) - 1); - memcpy(uid->serial, confdata->ned1.HDA_location, + memcpy(uid->serial, private->ned->HDA_location, sizeof(uid->serial) - 1); EBCASC(uid->serial, sizeof(uid->serial) - 1); - uid->ssid = confdata->neq.subsystemID; - uid->real_unit_addr = confdata->ned1.unit_addr; - if (confdata->ned2.sneq.flags == 0x40 && - confdata->ned2.sneq.format == 0x0001) { - uid->type = confdata->ned2.sneq.sua_flags; + uid->ssid = private->gneq->subsystemID; + uid->real_unit_addr = private->ned->unit_addr;; + if (private->sneq) { + uid->type = private->sneq->sua_flags; if (uid->type == UA_BASE_PAV_ALIAS) - uid->base_unit_addr = confdata->ned2.sneq.base_unit_addr; + uid->base_unit_addr = private->sneq->base_unit_addr; } else { uid->type = UA_BASE_DEVICE; } + if (private->vdsneq) { + for (count = 0; count < 16; count++) { + sprintf(uid->vduit+2*count, "%02x", + private->vdsneq->uit[count]); + } + } return 0; } @@ -623,6 +627,15 @@ static int dasd_eckd_read_conf_lpm(struct dasd_device *device, ret = -ENOMEM; goto out_error; } + + /* + * buffer has to start with EBCDIC "V1.0" to show + * support for virtual device SNEQ + */ + rcd_buf[0] = 0xE5; + rcd_buf[1] = 0xF1; + rcd_buf[2] = 0x4B; + rcd_buf[3] = 0xF0; cqr = dasd_eckd_build_rcd_lpm(device, rcd_buf, ciw, lpm); if (IS_ERR(cqr)) { ret = PTR_ERR(cqr); @@ -646,8 +659,62 @@ out_error: return ret; } -static int -dasd_eckd_read_conf(struct dasd_device *device) +static int dasd_eckd_identify_conf_parts(struct dasd_eckd_private *private) +{ + + struct dasd_sneq *sneq; + int i, count; + + private->ned = NULL; + private->sneq = NULL; + private->vdsneq = NULL; + private->gneq = NULL; + count = private->conf_len / sizeof(struct dasd_sneq); + sneq = (struct dasd_sneq *)private->conf_data; + for (i = 0; i < count; ++i) { + if (sneq->flags.identifier == 1 && sneq->format == 1) + private->sneq = sneq; + else if (sneq->flags.identifier == 1 && sneq->format == 4) + private->vdsneq = (struct vd_sneq *)sneq; + else if (sneq->flags.identifier == 2) + private->gneq = (struct dasd_gneq *)sneq; + else if (sneq->flags.identifier == 3 && sneq->res1 == 1) + private->ned = (struct dasd_ned *)sneq; + sneq++; + } + if (!private->ned || !private->gneq) { + private->ned = NULL; + private->sneq = NULL; + private->vdsneq = NULL; + private->gneq = NULL; + return -EINVAL; + } + return 0; + +}; + +static unsigned char dasd_eckd_path_access(void *conf_data, int conf_len) +{ + struct dasd_gneq *gneq; + int i, count, found; + + count = conf_len / sizeof(*gneq); + gneq = (struct dasd_gneq *)conf_data; + found = 0; + for (i = 0; i < count; ++i) { + if (gneq->flags.identifier == 2) { + found = 1; + break; + } + gneq++; + } + if (found) + return ((char *)gneq)[18] & 0x07; + else + return 0; +} + +static int dasd_eckd_read_conf(struct dasd_device *device) { void *conf_data; int conf_len, conf_data_saved; @@ -661,7 +728,6 @@ dasd_eckd_read_conf(struct dasd_device *device) path_data->opm = ccw_device_get_path_mask(device->cdev); lpm = 0x80; conf_data_saved = 0; - /* get configuration data per operational path */ for (lpm = 0x80; lpm; lpm>>= 1) { if (lpm & path_data->opm){ @@ -678,22 +744,20 @@ dasd_eckd_read_conf(struct dasd_device *device) "data retrieved"); continue; /* no error */ } - if (conf_len != sizeof(struct dasd_eckd_confdata)) { - MESSAGE(KERN_WARNING, - "sizes of configuration data mismatch" - "%d (read) vs %ld (expected)", - conf_len, - sizeof(struct dasd_eckd_confdata)); - kfree(conf_data); - continue; /* no error */ - } /* save first valid configuration data */ - if (!conf_data_saved){ - memcpy(&private->conf_data, conf_data, - sizeof(struct dasd_eckd_confdata)); + if (!conf_data_saved) { + kfree(private->conf_data); + private->conf_data = conf_data; + private->conf_len = conf_len; + if (dasd_eckd_identify_conf_parts(private)) { + private->conf_data = NULL; + private->conf_len = 0; + kfree(conf_data); + continue; + } conf_data_saved++; } - switch (((char *)conf_data)[242] & 0x07){ + switch (dasd_eckd_path_access(conf_data, conf_len)) { case 0x02: path_data->npm |= lpm; break; @@ -701,7 +765,8 @@ dasd_eckd_read_conf(struct dasd_device *device) path_data->ppm |= lpm; break; } - kfree(conf_data); + if (conf_data != private->conf_data) + kfree(conf_data); } } return 0; @@ -952,6 +1017,7 @@ out_err2: dasd_free_block(device->block); device->block = NULL; out_err1: + kfree(private->conf_data); kfree(device->private); device->private = NULL; return rc; @@ -959,7 +1025,17 @@ out_err1: static void dasd_eckd_uncheck_device(struct dasd_device *device) { + struct dasd_eckd_private *private; + + private = (struct dasd_eckd_private *) device->private; dasd_alias_disconnect_device_from_lcu(device); + private->ned = NULL; + private->sneq = NULL; + private->vdsneq = NULL; + private->gneq = NULL; + private->conf_len = 0; + kfree(private->conf_data); + private->conf_data = NULL; } static struct dasd_ccw_req * @@ -1746,9 +1822,10 @@ dasd_eckd_fill_info(struct dasd_device * device, info->characteristics_size = sizeof(struct dasd_eckd_characteristics); memcpy(info->characteristics, &private->rdc_data, sizeof(struct dasd_eckd_characteristics)); - info->confdata_size = sizeof(struct dasd_eckd_confdata); - memcpy(info->configuration_data, &private->conf_data, - sizeof(struct dasd_eckd_confdata)); + info->confdata_size = min((unsigned long)private->conf_len, + sizeof(info->configuration_data)); + memcpy(info->configuration_data, private->conf_data, + info->confdata_size); return 0; } diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h index fc2509c939b..4bf0aa5112c 100644 --- a/drivers/s390/block/dasd_eckd.h +++ b/drivers/s390/block/dasd_eckd.h @@ -231,133 +231,62 @@ struct dasd_eckd_characteristics { __u8 reserved3[10]; } __attribute__ ((packed)); -struct dasd_eckd_confdata { +/* elements of the configuration data */ +struct dasd_ned { struct { - struct { - unsigned char identifier:2; - unsigned char token_id:1; - unsigned char sno_valid:1; - unsigned char subst_sno:1; - unsigned char recNED:1; - unsigned char emuNED:1; - unsigned char reserved:1; - } __attribute__ ((packed)) flags; - __u8 descriptor; - __u8 dev_class; - __u8 reserved; - unsigned char dev_type[6]; - unsigned char dev_model[3]; - unsigned char HDA_manufacturer[3]; - unsigned char HDA_location[2]; - unsigned char HDA_seqno[12]; - __u8 ID; - __u8 unit_addr; - } __attribute__ ((packed)) ned1; - union { - struct { - struct { - unsigned char identifier:2; - unsigned char token_id:1; - unsigned char sno_valid:1; - unsigned char subst_sno:1; - unsigned char recNED:1; - unsigned char emuNED:1; - unsigned char reserved:1; - } __attribute__ ((packed)) flags; - __u8 descriptor; - __u8 reserved[2]; - unsigned char dev_type[6]; - unsigned char dev_model[3]; - unsigned char DASD_manufacturer[3]; - unsigned char DASD_location[2]; - unsigned char DASD_seqno[12]; - __u16 ID; - } __attribute__ ((packed)) ned; - struct { - unsigned char flags; /* byte 0 */ - unsigned char res1; /* byte 1 */ - __u16 format; /* byte 2-3 */ - unsigned char res2[4]; /* byte 4-7 */ - unsigned char sua_flags; /* byte 8 */ - __u8 base_unit_addr; /* byte 9 */ - unsigned char res3[22]; /* byte 10-31 */ - } __attribute__ ((packed)) sneq; - } __attribute__ ((packed)) ned2; + __u8 identifier:2; + __u8 token_id:1; + __u8 sno_valid:1; + __u8 subst_sno:1; + __u8 recNED:1; + __u8 emuNED:1; + __u8 reserved:1; + } __attribute__ ((packed)) flags; + __u8 descriptor; + __u8 dev_class; + __u8 reserved; + __u8 dev_type[6]; + __u8 dev_model[3]; + __u8 HDA_manufacturer[3]; + __u8 HDA_location[2]; + __u8 HDA_seqno[12]; + __u8 ID; + __u8 unit_addr; +} __attribute__ ((packed)); + +struct dasd_sneq { struct { - struct { - unsigned char identifier:2; - unsigned char token_id:1; - unsigned char sno_valid:1; - unsigned char subst_sno:1; - unsigned char recNED:1; - unsigned char emuNED:1; - unsigned char reserved:1; - } __attribute__ ((packed)) flags; - __u8 descriptor; - __u8 reserved[2]; - unsigned char cont_type[6]; - unsigned char cont_model[3]; - unsigned char cont_manufacturer[3]; - unsigned char cont_location[2]; - unsigned char cont_seqno[12]; - __u16 ID; - } __attribute__ ((packed)) ned3; + __u8 identifier:2; + __u8 reserved:6; + } __attribute__ ((packed)) flags; + __u8 res1; + __u16 format; + __u8 res2[4]; /* byte 4- 7 */ + __u8 sua_flags; /* byte 8 */ + __u8 base_unit_addr; /* byte 9 */ + __u8 res3[22]; /* byte 10-31 */ +} __attribute__ ((packed)); + +struct vd_sneq { struct { - struct { - unsigned char identifier:2; - unsigned char token_id:1; - unsigned char sno_valid:1; - unsigned char subst_sno:1; - unsigned char recNED:1; - unsigned char emuNED:1; - unsigned char reserved:1; - } __attribute__ ((packed)) flags; - __u8 descriptor; - __u8 reserved[2]; - unsigned char cont_type[6]; - unsigned char empty[3]; - unsigned char cont_manufacturer[3]; - unsigned char cont_location[2]; - unsigned char cont_seqno[12]; - __u16 ID; - } __attribute__ ((packed)) ned4; - unsigned char ned5[32]; - unsigned char ned6[32]; - unsigned char ned7[32]; + __u8 identifier:2; + __u8 reserved:6; + } __attribute__ ((packed)) flags; + __u8 res1; + __u16 format; + __u8 res2[4]; /* byte 4- 7 */ + __u8 uit[16]; /* byte 8-23 */ + __u8 res3[8]; /* byte 24-31 */ +} __attribute__ ((packed)); + +struct dasd_gneq { struct { - struct { - unsigned char identifier:2; - unsigned char reserved:6; - } __attribute__ ((packed)) flags; - __u8 selector; - __u16 interfaceID; - __u32 reserved; - __u16 subsystemID; - struct { - unsigned char sp0:1; - unsigned char sp1:1; - unsigned char reserved:5; - unsigned char scluster:1; - } __attribute__ ((packed)) spathID; - __u8 unit_address; - __u8 dev_ID; - __u8 dev_address; - __u8 adapterID; - __u16 link_address; - struct { - unsigned char parallel:1; - unsigned char escon:1; - unsigned char reserved:1; - unsigned char ficon:1; - unsigned char reserved2:4; - } __attribute__ ((packed)) protocol_type; - struct { - unsigned char PID_in_236:1; - unsigned char reserved:7; - } __attribute__ ((packed)) format_flags; - __u8 log_dev_address; - unsigned char reserved2[12]; - } __attribute__ ((packed)) neq; + __u8 identifier:2; + __u8 reserved:6; + } __attribute__ ((packed)) flags; + __u8 reserved[7]; + __u16 subsystemID; + __u8 reserved2[22]; } __attribute__ ((packed)); struct dasd_eckd_path { @@ -463,7 +392,14 @@ struct alias_pav_group { struct dasd_eckd_private { struct dasd_eckd_characteristics rdc_data; - struct dasd_eckd_confdata conf_data; + u8 *conf_data; + int conf_len; + /* pointers to specific parts in the conf_data */ + struct dasd_ned *ned; + struct dasd_sneq *sneq; + struct vd_sneq *vdsneq; + struct dasd_gneq *gneq; + struct dasd_eckd_path path_data; struct eckd_count count_area[5]; int init_cqr_status; diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index fb2f931cf84..31ecaa4a40e 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -307,6 +307,7 @@ struct dasd_uid { __u16 ssid; __u8 real_unit_addr; __u8 base_unit_addr; + char vduit[33]; }; /* -- GitLab From 3a95e8eb34f595a0144adb6e5513d456319bd8a5 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Fri, 1 Aug 2008 16:39:10 +0200 Subject: [PATCH 0529/1024] [S390] ipl: Reboot from alternate device does not work when booting from file During startup we check if diag308 works using diag 308 subcode 6, which stores the actual ipl information. This fails with rc = 0x102, if the system has been ipled from the HMC using load from CD or load from file. In the case of rc = 0x102 we have to assume that diag 308 is working, since it still can be used to ipl from an alternative device. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ipl.c | 5 ++++- include/asm-s390/ipl.h | 3 ++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 54b2779b5e2..2dcf590faba 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -1705,7 +1705,10 @@ void __init setup_ipl(void) void __init ipl_update_parameters(void) { - if (diag308(DIAG308_STORE, &ipl_block) == DIAG308_RC_OK) + int rc; + + rc = diag308(DIAG308_STORE, &ipl_block); + if ((rc == DIAG308_RC_OK) || (rc == DIAG308_RC_NOCONFIG)) diag308_set_works = 1; } diff --git a/include/asm-s390/ipl.h b/include/asm-s390/ipl.h index eaca6dff540..1171e6d144a 100644 --- a/include/asm-s390/ipl.h +++ b/include/asm-s390/ipl.h @@ -159,7 +159,8 @@ enum diag308_vm_flags { }; enum diag308_rc { - DIAG308_RC_OK = 1, + DIAG308_RC_OK = 0x0001, + DIAG308_RC_NOCONFIG = 0x0102, }; extern int diag308(unsigned long subcode, void *addr); -- GitLab From 934b2857cc576ae53c92a66e63fce7ddcfa74691 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:11 +0200 Subject: [PATCH 0530/1024] [S390] nohz/sclp: disable timer on synchronous waits. sclp_sync_wait wait synchronously for an sclp interrupt and disables timer interrupts. However on the irq enter paths there is an extra check if a timer interrupt would be due and calls the timer callback. This would schedule softirqs in the wrong context. So introduce local_tick_enable/disable which prevents this. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/lib/delay.c | 4 ++-- drivers/s390/char/sclp.c | 6 ++++-- include/asm-s390/hardirq.h | 14 ++++++++++++++ 3 files changed, 20 insertions(+), 4 deletions(-) diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index eae21a8ac72..fc6ab6094df 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -43,7 +43,7 @@ void __udelay(unsigned long usecs) local_bh_disable(); local_irq_save(flags); if (raw_irqs_disabled_flags(flags)) { - old_cc = S390_lowcore.clock_comparator; + old_cc = local_tick_disable(); S390_lowcore.clock_comparator = -1ULL; __ctl_store(cr0, 0, 0); dummy = (cr0 & 0xffff00e0) | 0x00000800; @@ -65,7 +65,7 @@ void __udelay(unsigned long usecs) if (raw_irqs_disabled_flags(flags)) { __ctl_load(cr0, 0, 0); - S390_lowcore.clock_comparator = old_cc; + local_tick_enable(old_cc); } if (!irq_context) _local_bh_enable(); diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c index 3c8b25e6c34..1fd8f2193ed 100644 --- a/drivers/s390/char/sclp.c +++ b/drivers/s390/char/sclp.c @@ -399,6 +399,7 @@ sclp_tod_from_jiffies(unsigned long jiffies) void sclp_sync_wait(void) { + unsigned long long old_tick; unsigned long flags; unsigned long cr0, cr0_sync; u64 timeout; @@ -419,11 +420,12 @@ sclp_sync_wait(void) if (!irq_context) local_bh_disable(); /* Enable service-signal interruption, disable timer interrupts */ + old_tick = local_tick_disable(); trace_hardirqs_on(); __ctl_store(cr0, 0, 0); cr0_sync = cr0; + cr0_sync &= 0xffff00a0; cr0_sync |= 0x00000200; - cr0_sync &= 0xFFFFF3AC; __ctl_load(cr0_sync, 0, 0); __raw_local_irq_stosm(0x01); /* Loop until driver state indicates finished request */ @@ -439,9 +441,9 @@ sclp_sync_wait(void) __ctl_load(cr0, 0, 0); if (!irq_context) _local_bh_enable(); + local_tick_enable(old_tick); local_irq_restore(flags); } - EXPORT_SYMBOL(sclp_sync_wait); /* Dispatch changes in send and receive mask to registered listeners. */ diff --git a/include/asm-s390/hardirq.h b/include/asm-s390/hardirq.h index 4b7cb964ff3..89ec7056da2 100644 --- a/include/asm-s390/hardirq.h +++ b/include/asm-s390/hardirq.h @@ -34,4 +34,18 @@ typedef struct { void clock_comparator_work(void); +static inline unsigned long long local_tick_disable(void) +{ + unsigned long long old; + + old = S390_lowcore.clock_comparator; + S390_lowcore.clock_comparator = -1ULL; + return old; +} + +static inline void local_tick_enable(unsigned long long comp) +{ + S390_lowcore.clock_comparator = comp; +} + #endif /* __ASM_HARDIRQ_H */ -- GitLab From a4b526b3ba6353cd89a38e41da48ed83b0ead16f Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 1 Aug 2008 16:39:12 +0200 Subject: [PATCH 0531/1024] [S390] Optimize storage key operations for anon pages For anonymous pages without a swap cache backing the check in page_remove_rmap for the physical dirty bit in page_remove_rmap is unnecessary. The instructions that are used to check and reset the dirty bit are expensive. Removing the check noticably speeds up process exit. In addition the clearing of the dirty bit in __SetPageUptodate is pointless as well. With these two changes there is no storage key operation for an anonymous page anymore if it does not hit the swap space. The micro benchmark which repeatedly executes an empty shell script gets about 5% faster. Signed-off-by: Martin Schwidefsky --- include/linux/page-flags.h | 3 --- mm/rmap.c | 3 ++- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 54590a9a103..25aaccdb2f2 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -239,9 +239,6 @@ static inline void __SetPageUptodate(struct page *page) { smp_wmb(); __set_bit(PG_uptodate, &(page)->flags); -#ifdef CONFIG_S390 - page_clear_dirty(page); -#endif } static inline void SetPageUptodate(struct page *page) diff --git a/mm/rmap.c b/mm/rmap.c index 99bc3f9cd79..94a5246a3f9 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -667,7 +667,8 @@ void page_remove_rmap(struct page *page, struct vm_area_struct *vma) * Leaving it set also helps swapoff to reinstate ptes * faster for those pages still in swapcache. */ - if (page_test_dirty(page)) { + if ((!PageAnon(page) || PageSwapCache(page)) && + page_test_dirty(page)) { page_clear_dirty(page); set_page_dirty(page); } -- GitLab From 683d718a893575a88c551ad71ea2c382eedbf67e Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 1 Aug 2008 16:39:13 +0200 Subject: [PATCH 0532/1024] [S390] qeth: preallocated qeth header for hiper socket For hiper socket devices this patch will economize the reallocation of the tx skb data segment by allocating separate memory for the qdio transport information (qeth header). Signed-off-by: Frank Blaschka Signed-off-by: Martin Schwidefsky --- drivers/s390/net/qeth_core.h | 5 +-- drivers/s390/net/qeth_core_main.c | 59 ++++++++++++++++++++++++------- drivers/s390/net/qeth_l2_main.c | 50 ++++++++++++++++++++------ drivers/s390/net/qeth_l3_main.c | 51 +++++++++++++++++++------- 4 files changed, 126 insertions(+), 39 deletions(-) diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 1895dbb553c..80971c21ea1 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -419,6 +419,7 @@ struct qeth_qdio_out_buffer { int next_element_to_fill; struct sk_buff_head skb_list; struct list_head ctx_list; + int is_header[16]; }; struct qeth_card; @@ -785,7 +786,7 @@ void qeth_core_remove_osn_attributes(struct device *); /* exports for qeth discipline device drivers */ extern struct qeth_card_list_struct qeth_core_card_list; - +extern struct kmem_cache *qeth_core_header_cache; extern struct qeth_dbf_info qeth_dbf[QETH_DBF_INFOS]; void qeth_set_allowed_threads(struct qeth_card *, unsigned long , int); @@ -843,7 +844,7 @@ int qeth_get_priority_queue(struct qeth_card *, struct sk_buff *, int, int); int qeth_get_elements_no(struct qeth_card *, void *, struct sk_buff *, int); int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *, struct sk_buff *, struct qeth_hdr *, int, - struct qeth_eddp_context *); + struct qeth_eddp_context *, int, int); int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *, struct sk_buff *, struct qeth_hdr *, int, struct qeth_eddp_context *); diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index cebb25e36e8..7a554991971 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -48,6 +48,8 @@ EXPORT_SYMBOL_GPL(qeth_dbf); struct qeth_card_list_struct qeth_core_card_list; EXPORT_SYMBOL_GPL(qeth_core_card_list); +struct kmem_cache *qeth_core_header_cache; +EXPORT_SYMBOL_GPL(qeth_core_header_cache); static struct device *qeth_core_root_dev; static unsigned int known_devices[][10] = QETH_MODELLIST_ARRAY; @@ -933,6 +935,10 @@ static void qeth_clear_output_buffer(struct qeth_qdio_out_q *queue, } qeth_eddp_buf_release_contexts(buf); for (i = 0; i < QETH_MAX_BUFFER_ELEMENTS(queue->card); ++i) { + if (buf->buffer->element[i].addr && buf->is_header[i]) + kmem_cache_free(qeth_core_header_cache, + buf->buffer->element[i].addr); + buf->is_header[i] = 0; buf->buffer->element[i].length = 0; buf->buffer->element[i].addr = NULL; buf->buffer->element[i].flags = 0; @@ -3002,8 +3008,8 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr, if (skb_shinfo(skb)->nr_frags > 0) elements_needed = (skb_shinfo(skb)->nr_frags + 1); if (elements_needed == 0) - elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE) - + skb->len) >> PAGE_SHIFT); + elements_needed = 1 + (((((unsigned long) skb->data) % + PAGE_SIZE) + skb->len) >> PAGE_SHIFT); if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) { QETH_DBF_MESSAGE(2, "Invalid size of IP packet " "(Number=%d / Length=%d). Discarded.\n", @@ -3015,7 +3021,8 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr, EXPORT_SYMBOL_GPL(qeth_get_elements_no); static inline void __qeth_fill_buffer(struct sk_buff *skb, - struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill) + struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill, + int offset) { int length = skb->len; int length_here; @@ -3027,6 +3034,11 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb, data = skb->data; first_lap = (is_tso == 0 ? 1 : 0); + if (offset >= 0) { + data = skb->data + offset; + first_lap = 0; + } + while (length > 0) { /* length_here is the remaining amount of data in this page */ length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE); @@ -3058,22 +3070,22 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb, } static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue, - struct qeth_qdio_out_buffer *buf, struct sk_buff *skb) + struct qeth_qdio_out_buffer *buf, struct sk_buff *skb, + struct qeth_hdr *hdr, int offset, int hd_len) { struct qdio_buffer *buffer; - struct qeth_hdr_tso *hdr; int flush_cnt = 0, hdr_len, large_send = 0; buffer = buf->buffer; atomic_inc(&skb->users); skb_queue_tail(&buf->skb_list, skb); - hdr = (struct qeth_hdr_tso *) skb->data; /*check first on TSO ....*/ - if (hdr->hdr.hdr.l3.id == QETH_HEADER_TYPE_TSO) { + if (hdr->hdr.l3.id == QETH_HEADER_TYPE_TSO) { int element = buf->next_element_to_fill; - hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len; + hdr_len = sizeof(struct qeth_hdr_tso) + + ((struct qeth_hdr_tso *)hdr)->ext.dg_hdr_len; /*fill first buffer entry only with header information */ buffer->element[element].addr = skb->data; buffer->element[element].length = hdr_len; @@ -3083,9 +3095,20 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue, skb->len -= hdr_len; large_send = 1; } + + if (offset >= 0) { + int element = buf->next_element_to_fill; + buffer->element[element].addr = hdr; + buffer->element[element].length = sizeof(struct qeth_hdr) + + hd_len; + buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG; + buf->is_header[element] = 1; + buf->next_element_to_fill++; + } + if (skb_shinfo(skb)->nr_frags == 0) __qeth_fill_buffer(skb, buffer, large_send, - (int *)&buf->next_element_to_fill); + (int *)&buf->next_element_to_fill, offset); else __qeth_fill_buffer_frag(skb, buffer, large_send, (int *)&buf->next_element_to_fill); @@ -3115,7 +3138,7 @@ static inline int qeth_fill_buffer(struct qeth_qdio_out_q *queue, int qeth_do_send_packet_fast(struct qeth_card *card, struct qeth_qdio_out_q *queue, struct sk_buff *skb, struct qeth_hdr *hdr, int elements_needed, - struct qeth_eddp_context *ctx) + struct qeth_eddp_context *ctx, int offset, int hd_len) { struct qeth_qdio_out_buffer *buffer; int buffers_needed = 0; @@ -3148,7 +3171,7 @@ int qeth_do_send_packet_fast(struct qeth_card *card, } atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); if (ctx == NULL) { - qeth_fill_buffer(queue, buffer, skb); + qeth_fill_buffer(queue, buffer, skb, hdr, offset, hd_len); qeth_flush_buffers(queue, index, 1); } else { flush_cnt = qeth_eddp_fill_buffer(queue, ctx, index); @@ -3224,7 +3247,7 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue, } } if (ctx == NULL) - tmp = qeth_fill_buffer(queue, buffer, skb); + tmp = qeth_fill_buffer(queue, buffer, skb, hdr, -1, 0); else { tmp = qeth_eddp_fill_buffer(queue, ctx, queue->next_buf_to_fill); @@ -4443,8 +4466,17 @@ static int __init qeth_core_init(void) rc = IS_ERR(qeth_core_root_dev) ? PTR_ERR(qeth_core_root_dev) : 0; if (rc) goto register_err; - return 0; + qeth_core_header_cache = kmem_cache_create("qeth_hdr", + sizeof(struct qeth_hdr) + ETH_HLEN, 64, 0, NULL); + if (!qeth_core_header_cache) { + rc = -ENOMEM; + goto slab_err; + } + + return 0; +slab_err: + s390_root_dev_unregister(qeth_core_root_dev); register_err: driver_remove_file(&qeth_core_ccwgroup_driver.driver, &driver_attr_group); @@ -4466,6 +4498,7 @@ static void __exit qeth_core_exit(void) &driver_attr_group); ccwgroup_driver_unregister(&qeth_core_ccwgroup_driver); ccw_driver_unregister(&qeth_ccw_driver); + kmem_cache_destroy(qeth_core_header_cache); qeth_unregister_dbf_views(); PRINT_INFO("core functions removed\n"); } diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index a8b069cd9a4..b3cee032f57 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -243,8 +243,7 @@ static void qeth_l2_get_packet_type(struct qeth_card *card, static void qeth_l2_fill_header(struct qeth_card *card, struct qeth_hdr *hdr, struct sk_buff *skb, int ipv, int cast_type) { - struct vlan_ethhdr *veth = (struct vlan_ethhdr *)((skb->data) + - QETH_HEADER_SIZE); + struct vlan_ethhdr *veth = (struct vlan_ethhdr *)skb_mac_header(skb); memset(hdr, 0, sizeof(struct qeth_hdr)); hdr->hdr.l2.id = QETH_HEADER_TYPE_LAYER2; @@ -621,6 +620,9 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) int tx_bytes = skb->len; enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO; struct qeth_eddp_context *ctx = NULL; + int data_offset = -1; + int elements_needed = 0; + int hd_len = 0; if ((card->state != CARD_STATE_UP) || !card->lan_online) { card->stats.tx_carrier_errors++; @@ -643,13 +645,32 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) if (card->info.type == QETH_CARD_TYPE_OSN) hdr = (struct qeth_hdr *)skb->data; else { - /* create a clone with writeable headroom */ - new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr)); - if (!new_skb) - goto tx_drop; - hdr = (struct qeth_hdr *)skb_push(new_skb, + if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) && + (skb_shinfo(skb)->nr_frags == 0)) { + new_skb = skb; + data_offset = ETH_HLEN; + hd_len = ETH_HLEN; + hdr = kmem_cache_alloc(qeth_core_header_cache, + GFP_ATOMIC); + if (!hdr) + goto tx_drop; + elements_needed++; + skb_reset_mac_header(new_skb); + qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type); + hdr->hdr.l2.pkt_length = new_skb->len; + memcpy(((char *)hdr) + sizeof(struct qeth_hdr), + skb_mac_header(new_skb), ETH_HLEN); + } else { + /* create a clone with writeable headroom */ + new_skb = skb_realloc_headroom(skb, + sizeof(struct qeth_hdr)); + if (!new_skb) + goto tx_drop; + hdr = (struct qeth_hdr *)skb_push(new_skb, sizeof(struct qeth_hdr)); - qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type); + skb_set_mac_header(new_skb, sizeof(struct qeth_hdr)); + qeth_l2_fill_header(card, hdr, new_skb, ipv, cast_type); + } } if (large_send == QETH_LARGE_SEND_EDDP) { @@ -660,9 +681,13 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) goto tx_drop; } } else { - elements = qeth_get_elements_no(card, (void *)hdr, new_skb, 0); - if (!elements) + elements = qeth_get_elements_no(card, (void *)hdr, new_skb, + elements_needed); + if (!elements) { + if (data_offset >= 0) + kmem_cache_free(qeth_core_header_cache, hdr); goto tx_drop; + } } if ((large_send == QETH_LARGE_SEND_NO) && @@ -674,7 +699,7 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) elements, ctx); else rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr, - elements, ctx); + elements, ctx, data_offset, hd_len); if (!rc) { card->stats.tx_packets++; card->stats.tx_bytes += tx_bytes; @@ -701,6 +726,9 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) if (ctx != NULL) qeth_eddp_put_context(ctx); + if (data_offset >= 0) + kmem_cache_free(qeth_core_header_cache, hdr); + if (rc == -EBUSY) { if (new_skb != skb) dev_kfree_skb_any(new_skb); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 3e1d1385735..dd72c3c2016 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2604,6 +2604,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) int tx_bytes = skb->len; enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO; struct qeth_eddp_context *ctx = NULL; + int data_offset = -1; if ((card->info.type == QETH_CARD_TYPE_IQD) && (skb->protocol != htons(ETH_P_IPV6)) && @@ -2624,14 +2625,28 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) card->perf_stats.outbound_start_time = qeth_get_micros(); } - /* create a clone with writeable headroom */ - new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso) + - VLAN_HLEN); - if (!new_skb) - goto tx_drop; + if (skb_is_gso(skb)) + large_send = card->options.large_send; + + if ((card->info.type == QETH_CARD_TYPE_IQD) && (!large_send) && + (skb_shinfo(skb)->nr_frags == 0)) { + new_skb = skb; + data_offset = ETH_HLEN; + hdr = kmem_cache_alloc(qeth_core_header_cache, GFP_ATOMIC); + if (!hdr) + goto tx_drop; + elements_needed++; + } else { + /* create a clone with writeable headroom */ + new_skb = skb_realloc_headroom(skb, sizeof(struct qeth_hdr_tso) + + VLAN_HLEN); + if (!new_skb) + goto tx_drop; + } if (card->info.type == QETH_CARD_TYPE_IQD) { - skb_pull(new_skb, ETH_HLEN); + if (data_offset < 0) + skb_pull(new_skb, ETH_HLEN); } else { if (new_skb->protocol == htons(ETH_P_IP)) { if (card->dev->type == ARPHRD_IEEE802_TR) @@ -2657,9 +2672,6 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) netif_stop_queue(dev); - if (skb_is_gso(new_skb)) - large_send = card->options.large_send; - /* fix hardware limitation: as long as we do not have sbal * chaining we can not send long frag lists so we temporary * switch to EDDP @@ -2677,9 +2689,16 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) qeth_tso_fill_header(card, hdr, new_skb); elements_needed++; } else { - hdr = (struct qeth_hdr *)skb_push(new_skb, + if (data_offset < 0) { + hdr = (struct qeth_hdr *)skb_push(new_skb, sizeof(struct qeth_hdr)); - qeth_l3_fill_header(card, hdr, new_skb, ipv, cast_type); + qeth_l3_fill_header(card, hdr, new_skb, ipv, + cast_type); + } else { + qeth_l3_fill_header(card, hdr, new_skb, ipv, + cast_type); + hdr->hdr.l3.length = new_skb->len - data_offset; + } } if (large_send == QETH_LARGE_SEND_EDDP) { @@ -2695,8 +2714,11 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) } else { int elems = qeth_get_elements_no(card, (void *)hdr, new_skb, elements_needed); - if (!elems) + if (!elems) { + if (data_offset >= 0) + kmem_cache_free(qeth_core_header_cache, hdr); goto tx_drop; + } elements_needed += elems; } @@ -2709,7 +2731,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) elements_needed, ctx); else rc = qeth_do_send_packet_fast(card, queue, new_skb, hdr, - elements_needed, ctx); + elements_needed, ctx, data_offset, 0); if (!rc) { card->stats.tx_packets++; @@ -2737,6 +2759,9 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) if (ctx != NULL) qeth_eddp_put_context(ctx); + if (data_offset >= 0) + kmem_cache_free(qeth_core_header_cache, hdr); + if (rc == -EBUSY) { if (new_skb != skb) dev_kfree_skb_any(new_skb); -- GitLab From 883e512c99fc398d1b2b5e8e92b6bacff2551756 Mon Sep 17 00:00:00 2001 From: Michael Ernst Date: Fri, 1 Aug 2008 16:39:14 +0200 Subject: [PATCH 0533/1024] [S390] cio: Memory allocation for idset changed. Memory allocation for the quite huge idset changed from kzalloc to vmalloc. Signed-off-by: Michael Ernst Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/idset.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/s390/cio/idset.c b/drivers/s390/cio/idset.c index ef7bc0a125e..cf8f24a4b5e 100644 --- a/drivers/s390/cio/idset.c +++ b/drivers/s390/cio/idset.c @@ -5,7 +5,7 @@ * Author(s): Peter Oberparleiter */ -#include +#include #include #include "idset.h" #include "css.h" @@ -25,18 +25,18 @@ static struct idset *idset_new(int num_ssid, int num_id) { struct idset *set; - set = kzalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id), - GFP_KERNEL); + set = vmalloc(sizeof(struct idset) + bitmap_size(num_ssid, num_id)); if (set) { set->num_ssid = num_ssid; set->num_id = num_id; + memset(set->bitmap, 0, bitmap_size(num_ssid, num_id)); } return set; } void idset_free(struct idset *set) { - kfree(set); + vfree(set); } void idset_clear(struct idset *set) -- GitLab From 519620cc3d723d41522191ebd150fba4a3790296 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:15 +0200 Subject: [PATCH 0534/1024] [S390] Wire up new syscalls. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/compat_wrapper.S | 37 +++++++++++++++++++++++++++++++ arch/s390/kernel/syscalls.S | 6 +++++ include/asm-s390/unistd.h | 8 ++++++- 3 files changed, 50 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index d003a6e16af..328a20e880b 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1732,3 +1732,40 @@ compat_sys_timerfd_gettime_wrapper: lgfr %r2,%r2 # int llgtr %r3,%r3 # struct compat_itimerspec * jg compat_sys_timerfd_gettime + + .globl compat_sys_signalfd4_wrapper +compat_sys_signalfd4_wrapper: + lgfr %r2,%r2 # int + llgtr %r3,%r3 # compat_sigset_t * + llgfr %r4,%r4 # compat_size_t + lgfr %r5,%r5 # int + jg compat_sys_signalfd4 + + .globl sys_eventfd2_wrapper +sys_eventfd2_wrapper: + llgfr %r2,%r2 # unsigned int + lgfr %r3,%r3 # int + jg sys_eventfd2 + + .globl sys_inotify_init1_wrapper +sys_inotify_init1_wrapper: + lgfr %r2,%r2 # int + jg sys_inotify_init1 + + .globl sys_pipe2_wrapper +sys_pipe2_wrapper: + llgtr %r2,%r2 # u32 * + lgfr %r3,%r3 # int + jg sys_pipe2 # branch to system call + + .globl sys_dup3_wrapper +sys_dup3_wrapper: + llgfr %r2,%r2 # unsigned int + llgfr %r3,%r3 # unsigned int + lgfr %r4,%r4 # int + jg sys_dup3 # branch to system call + + .globl sys_epoll_create1_wrapper +sys_epoll_create1_wrapper: + lgfr %r2,%r2 # int + jg sys_epoll_create1 # branch to system call diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index c87ec687d4c..c66d35e5514 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -330,3 +330,9 @@ SYSCALL(sys_eventfd,sys_eventfd,sys_eventfd_wrapper) SYSCALL(sys_timerfd_create,sys_timerfd_create,sys_timerfd_create_wrapper) SYSCALL(sys_timerfd_settime,sys_timerfd_settime,compat_sys_timerfd_settime_wrapper) /* 320 */ SYSCALL(sys_timerfd_gettime,sys_timerfd_gettime,compat_sys_timerfd_gettime_wrapper) +SYSCALL(sys_signalfd4,sys_signalfd4,compat_sys_signalfd4_wrapper) +SYSCALL(sys_eventfd2,sys_eventfd2,sys_eventfd2_wrapper) +SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper) +SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */ +SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper) +SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper) diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h index 583da807ea9..c8ad350d144 100644 --- a/include/asm-s390/unistd.h +++ b/include/asm-s390/unistd.h @@ -259,7 +259,13 @@ #define __NR_timerfd_create 319 #define __NR_timerfd_settime 320 #define __NR_timerfd_gettime 321 -#define NR_syscalls 322 +#define __NR_signalfd4 322 +#define __NR_eventfd2 323 +#define __NR_inotify_init1 324 +#define __NR_pipe2 325 +#define __NR_dup3 326 +#define __NR_epoll_create1 327 +#define NR_syscalls 328 /* * There are some system calls that are not present on 64 bit, some -- GitLab From 7e9238fbc10373effc2c3b0b516b0bdc8fefc27b Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Fri, 1 Aug 2008 16:39:16 +0200 Subject: [PATCH 0535/1024] [S390] Add support for memory hot-remove. This patch enables memory hot-remove on s390. Signed-off-by: Gerald Schaefer Signed-off-by: Heiko Carstens Cc: Martin Schwidefsky --- arch/s390/Kconfig | 3 +++ arch/s390/mm/init.c | 13 ++++++++++++- drivers/s390/char/sclp_cmd.c | 5 +++++ 3 files changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 2ed88122be9..8d41908e251 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -317,6 +317,9 @@ config ARCH_ENABLE_MEMORY_HOTPLUG def_bool y depends on SPARSEMEM +config ARCH_ENABLE_MEMORY_HOTREMOVE + def_bool y + source "mm/Kconfig" comment "I/O subsystem configuration" diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 4993b0f594e..1169130a97e 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -179,7 +179,7 @@ int arch_add_memory(int nid, u64 start, u64 size) int rc; pgdat = NODE_DATA(nid); - zone = pgdat->node_zones + ZONE_NORMAL; + zone = pgdat->node_zones + ZONE_MOVABLE; rc = vmem_add_mapping(start, size); if (rc) return rc; @@ -189,3 +189,14 @@ int arch_add_memory(int nid, u64 start, u64 size) return rc; } #endif /* CONFIG_MEMORY_HOTPLUG */ + +#ifdef CONFIG_MEMORY_HOTREMOVE +int remove_memory(u64 start, u64 size) +{ + unsigned long start_pfn, end_pfn; + + start_pfn = PFN_DOWN(start); + end_pfn = start_pfn + PFN_DOWN(size); + return offline_pages(start_pfn, end_pfn, 120 * HZ); +} +#endif /* CONFIG_MEMORY_HOTREMOVE */ diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index 0c2b77493db..eb5f1b8bc57 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -427,6 +427,8 @@ static int sclp_mem_notifier(struct notifier_block *nb, sclp_attach_storage(id); switch (action) { case MEM_ONLINE: + case MEM_GOING_OFFLINE: + case MEM_CANCEL_OFFLINE: break; case MEM_GOING_ONLINE: rc = sclp_mem_change_state(start, size, 1); @@ -434,6 +436,9 @@ static int sclp_mem_notifier(struct notifier_block *nb, case MEM_CANCEL_ONLINE: sclp_mem_change_state(start, size, 0); break; + case MEM_OFFLINE: + sclp_mem_change_state(start, size, 0); + break; default: rc = -EINVAL; break; -- GitLab From 3b8e3004aea95c687e8991583e7b150ec1416ff3 Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Fri, 1 Aug 2008 16:39:17 +0200 Subject: [PATCH 0536/1024] [S390] qdio: make sure qdr is aligned to page size kzalloc does not guarantee the required alignment of qdr to page size, use get_zeroed_page instead. Signed-off-by: Jan Glauber --- drivers/s390/cio/qdio_main.c | 2 +- drivers/s390/cio/qdio_setup.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index d10c73cc168..d15648514a0 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -1355,7 +1355,7 @@ int qdio_allocate(struct qdio_initialize *init_data) goto out_rel; /* qdr is used in ccw1.cda which is u32 */ - irq_ptr->qdr = kzalloc(sizeof(struct qdr), GFP_KERNEL | GFP_DMA); + irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!irq_ptr->qdr) goto out_rel; WARN_ON((unsigned long)irq_ptr->qdr & 0xfff); diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c index f0923a8aced..56fdd57ba19 100644 --- a/drivers/s390/cio/qdio_setup.c +++ b/drivers/s390/cio/qdio_setup.c @@ -325,7 +325,7 @@ void qdio_release_memory(struct qdio_irq *irq_ptr) kmem_cache_free(qdio_q_cache, q); } } - kfree(irq_ptr->qdr); + free_page((unsigned long) irq_ptr->qdr); free_page(irq_ptr->chsc_page); free_page((unsigned long) irq_ptr); } -- GitLab From d918fe2bd72830dfbe8ca2bb30d49930d1356e6d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:18 +0200 Subject: [PATCH 0537/1024] [S390] Remove diag 0x260 call from memory detection. The result of the diag 0x260 call is not always what one would expect. So just remove it. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/mem_detect.c | 23 ----------------------- 1 file changed, 23 deletions(-) diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c index 18ed7abe16c..9872999c66d 100644 --- a/arch/s390/kernel/mem_detect.c +++ b/arch/s390/kernel/mem_detect.c @@ -9,27 +9,6 @@ #include #include -static int memory_fast_detect(struct mem_chunk *chunk) -{ - unsigned long val0 = 0; - unsigned long val1 = 0xc; - int rc = -EOPNOTSUPP; - - if (ipl_flags & IPL_NSS_VALID) - return -EOPNOTSUPP; - asm volatile( - " diag %1,%2,0x260\n" - "0: lhi %0,0\n" - "1:\n" - EX_TABLE(0b,1b) - : "+d" (rc), "+d" (val0), "+d" (val1) : : "cc"); - - if (rc || val0 != val1) - return -EOPNOTSUPP; - chunk->size = val0 + 1; - return 0; -} - static inline int tprot(unsigned long addr) { int rc = -EFAULT; @@ -84,8 +63,6 @@ void detect_memory_layout(struct mem_chunk chunk[]) unsigned long flags, cr0; memset(chunk, 0, MEMORY_CHUNKS * sizeof(struct mem_chunk)); - if (memory_fast_detect(&chunk[0]) == 0) - return; /* Disable IRQs, DAT and low address protection so tprot does the * right thing and we don't get scheduled away with low address * protection disabled. -- GitLab From 8f8470032570988af2eeff520ca01a32fd908b2b Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:19 +0200 Subject: [PATCH 0538/1024] [S390] stp: fix section mismatch warning. Fix these two (false positive) warnings by adding an __init annoation: WARNING: vmlinux.o(.text+0x7e6a): Section mismatch in reference from the function stp_reset() to the function .init.text:__alloc_bootmem() The function stp_reset() references the function __init __alloc_bootmem(). This is often because stp_reset lacks a __init annotation or the annotation of __alloc_bootmem is wrong. WARNING: vmlinux.o(.text+0x7ece): Section mismatch in reference from the function stp_reset() to the function .init.text:free_bootmem() The function stp_reset() references the function __init free_bootmem(). This is often because stp_reset lacks a __init annotation or the annotation of free_bootmem is wrong. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index ab70d9bd926..ca114fe46ff 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -1348,7 +1348,7 @@ early_param("stp", early_parse_stp); /* * Reset STP attachment. */ -static void stp_reset(void) +static void __init stp_reset(void) { int rc; -- GitLab From 3f1934bc1a0dcc2b7c31c8fd4f41ea2dd6522c3e Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:20 +0200 Subject: [PATCH 0539/1024] [S390] qdio: fix section mismatch bug. Fix the two section mismatch warnings below. This fixes two real bugs since the code which has __exit annotations may already be gone when it is called. WARNING: vmlinux.o(.init.text+0x1cc4a): Section mismatch in reference from the function init_QDIO() to the function .exit.text:qdio_setup_exit() The function __init init_QDIO() references a function __exit qdio_setup_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __exit annotation of qdio_setup_exit() so it may be used outside an exit section. WARNING: vmlinux.o(.init.text+0x1cc7a): Section mismatch in reference from the function init_QDIO() to the function .exit.text:qdio_remove_perf_stats() The function __init init_QDIO() references a function __exit qdio_remove_perf_stats(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __exit annotation of qdio_remove_perf_stats() so it may be used outside an exit section. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/qdio_perf.c | 2 +- drivers/s390/cio/qdio_setup.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c index ea01b85b1cc..ec5c4a41423 100644 --- a/drivers/s390/cio/qdio_perf.c +++ b/drivers/s390/cio/qdio_perf.c @@ -142,7 +142,7 @@ int __init qdio_setup_perf_stats(void) return 0; } -void __exit qdio_remove_perf_stats(void) +void qdio_remove_perf_stats(void) { #ifdef CONFIG_PROC_FS remove_proc_entry("qdio_perf", NULL); diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c index 56fdd57ba19..1bd2a208db2 100644 --- a/drivers/s390/cio/qdio_setup.c +++ b/drivers/s390/cio/qdio_setup.c @@ -515,7 +515,7 @@ int __init qdio_setup_init(void) return 0; } -void __exit qdio_setup_exit(void) +void qdio_setup_exit(void) { kmem_cache_destroy(qdio_q_cache); } -- GitLab From 1378ee9b67298176edbcec0ab87b38e913d76ab9 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Fri, 1 Aug 2008 16:39:21 +0200 Subject: [PATCH 0540/1024] [S390] cio: Include linux/string.h in schid.h. schid.h needs string.h for memset and memcmp. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky --- include/asm-s390/schid.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-s390/schid.h b/include/asm-s390/schid.h index 7bdc0fe1569..825503cf3dc 100644 --- a/include/asm-s390/schid.h +++ b/include/asm-s390/schid.h @@ -11,6 +11,7 @@ struct subchannel_id { } __attribute__ ((packed, aligned(4))); #ifdef __KERNEL__ +#include /* Helper function for sane state of pre-allocated subchannel_id. */ static inline void -- GitLab From 26f746f3e3bb44b37a894318aa8e808b914ad663 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:22 +0200 Subject: [PATCH 0541/1024] [S390] virtio console: fix section mismatch warning. Fix these two false positive warnings: WARNING: vmlinux.o(.text+0x2e1cc4): Section mismatch in reference from the function s390_virtio_console_init() to the function .init.text:early_put_chars() The function s390_virtio_console_init() references the function __init early_put_chars(). This is often because s390_virtio_console_init lacks a __init annotation or the annotation of early_put_chars is wrong. WARNING: vmlinux.o(.text+0x2e1cd0): Section mismatch in reference from the function s390_virtio_console_init() to the function .init.text:virtio_cons_early_init() The function s390_virtio_console_init() references the function __init virtio_cons_early_init(). This is often because s390_virtio_console_init lacks a __init annotation or the annotation of virtio_cons_early_init is wrong. Cc: Christian Borntraeger Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/kvm/kvm_virtio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index 79954bd6bfa..292b60da6dc 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -352,7 +352,7 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count) return len; } -void s390_virtio_console_init(void) +void __init s390_virtio_console_init(void) { virtio_cons_early_init(early_put_chars); } -- GitLab From fc7e1e4b1ca69109d0f694e47ef2328dcb0ebe6e Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 1 Aug 2008 16:39:23 +0200 Subject: [PATCH 0542/1024] [S390] dont use kthread for smp_rescan_cpus(). Since git commit 3da1c84c00c7e5fa8348336bd8c342f9128b0f14 "workqueues: make get_online_cpus() useable for work->func()" it is safe to call get_online_cpus() from workqueue context. So remove the kthread workaround again. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_config.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/s390/char/sclp_config.c b/drivers/s390/char/sclp_config.c index fff4ff485d9..4cebd6ee6d2 100644 --- a/drivers/s390/char/sclp_config.c +++ b/drivers/s390/char/sclp_config.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -41,19 +40,9 @@ static void sclp_cpu_capability_notify(struct work_struct *work) put_online_cpus(); } -static int sclp_cpu_kthread(void *data) -{ - smp_rescan_cpus(); - return 0; -} - static void __ref sclp_cpu_change_notify(struct work_struct *work) { - /* Can't call smp_rescan_cpus() from workqueue context since it may - * deadlock in case of cpu hotplug. So we have to create a kernel - * thread in order to call it. - */ - kthread_run(sclp_cpu_kthread, NULL, "cpu_rescan"); + smp_rescan_cpus(); } static void sclp_conf_receiver_fn(struct evbuf_header *evbuf) -- GitLab From ab4227cb2d936886069ef1056c02500d05beb15d Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 1 Aug 2008 16:39:24 +0200 Subject: [PATCH 0543/1024] [S390] qeth: avoid use of include/asm-s390 The planned move of include/asm-s390 to arch/s390/include/asm requires that all includes for asm headers use include/asm and not include/asm-s390. Signed-off-by: Martin Schwidefsky --- drivers/s390/net/qeth_core_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 7a554991971..bd420d1b9a0 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -19,8 +19,8 @@ #include #include -#include -#include +#include +#include #include #include "qeth_core.h" -- GitLab From e274f025e2caaadc1a6dd41adc9c9a19be075110 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 30 Jul 2008 12:34:59 -0700 Subject: [PATCH 0544/1024] [MTD] [NAND] Blackfin NFC Driver: fix bug - do not clobber the status from the first 256 bytes if operating on 512 pages Singed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/bf5xx_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index e87a5729732..3254348f858 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -273,7 +273,7 @@ static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat, dat += 256; read_ecc += 8; calc_ecc += 8; - ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc); + ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc); } return ret; -- GitLab From cf840392e83914b9fcdbce8a8a2bc17a84cf0353 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 30 Jul 2008 12:35:00 -0700 Subject: [PATCH 0545/1024] [MTD] [NAND] Blackfin NFC Driver: fix bug - hw ecc calc by making sure we extract 11 bits from each register instead of 10 Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/bf5xx_nand.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 3254348f858..fc58afe4733 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -298,7 +298,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd, ecc0 = bfin_read_NFC_ECC0(); ecc1 = bfin_read_NFC_ECC1(); - code[0] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11); + code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11); dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]); @@ -310,7 +310,7 @@ static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd, if (page_size == 512) { ecc0 = bfin_read_NFC_ECC2(); ecc1 = bfin_read_NFC_ECC3(); - code[1] = (ecc0 & 0x3FF) | ((ecc1 & 0x3FF) << 11); + code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11); /* second 3 bytes in ecc_code for second 256 * bytes of 512 page size -- GitLab From fcb90ba7e9ba9a17ca5103be3f3ae3a446dadc14 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 30 Jul 2008 12:35:01 -0700 Subject: [PATCH 0546/1024] [MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the Blackfin bootrom uses Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/Kconfig | 12 +++++++++++ drivers/mtd/nand/bf5xx_nand.c | 40 +++++++++++++++++++++++++++++++++++ 2 files changed, 52 insertions(+) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 71406e51785..c075b47e11a 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -109,6 +109,18 @@ config MTD_NAND_BF5XX_HWECC Enable the use of the BF5XX's internal ECC generator when using NAND. +config MTD_NAND_BF5XX_BOOTROM_ECC + bool "Use Blackfin BootROM ECC Layout" + default n + depends on MTD_NAND_BF5XX_HWECC + help + If you wish to modify NAND pages and allow the Blackfin on-chip + BootROM to boot from them, say Y here. This is only necessary + if you are booting U-Boot out of NAND and you wish to update + U-Boot from Linux' userspace. Otherwise, you should say N here. + + If unsure, say N. + config MTD_NAND_RTC_FROM4 tristate "Renesas Flash ROM 4-slot interface board (FROM_BOARD4)" depends on SH_SOLUTION_ENGINE diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index fc58afe4733..3555f6b3ebe 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -91,6 +91,41 @@ static const unsigned short bfin_nfc_pin_req[] = P_NAND_ALE, 0}; +#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC +static uint8_t bbt_pattern[] = { 0xff }; + +static struct nand_bbt_descr bootrom_bbt = { + .options = 0, + .offs = 63, + .len = 1, + .pattern = bbt_pattern, +}; + +static struct nand_ecclayout bootrom_ecclayout = { + .eccbytes = 24, + .eccpos = { + 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2, + 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2, + 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2, + 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2, + 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2, + 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2, + 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2, + 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2 + }, + .oobfree = { + { 0x8 * 0 + 3, 5 }, + { 0x8 * 1 + 3, 5 }, + { 0x8 * 2 + 3, 5 }, + { 0x8 * 3 + 3, 5 }, + { 0x8 * 4 + 3, 5 }, + { 0x8 * 5 + 3, 5 }, + { 0x8 * 6 + 3, 5 }, + { 0x8 * 7 + 3, 5 }, + } +}; +#endif + /* * Data structures for bf5xx nand flash controller driver */ @@ -712,6 +747,11 @@ static int bf5xx_nand_probe(struct platform_device *pdev) /* setup hardware ECC data struct */ if (hardware_ecc) { +#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC + chip->badblock_pattern = &bootrom_bbt; + chip->ecc.layout = &bootrom_ecclayout; +#endif + if (plat->page_size == NFC_PG_SIZE_256) { chip->ecc.bytes = 3; chip->ecc.size = 256; -- GitLab From 2445af3853928bf3ee7960e09f548a1b07924091 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 30 Jul 2008 12:35:02 -0700 Subject: [PATCH 0547/1024] [MTD] [NAND] Blackfin NFC Driver: add proper devinit/devexit markings to probe/remove functions Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/bf5xx_nand.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 3555f6b3ebe..e259a7b75b2 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -640,7 +640,7 @@ static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info) #endif } -static int bf5xx_nand_remove(struct platform_device *pdev) +static int __devexit bf5xx_nand_remove(struct platform_device *pdev) { struct bf5xx_nand_info *info = to_nand_info(pdev); struct mtd_info *mtd = NULL; @@ -673,7 +673,7 @@ static int bf5xx_nand_remove(struct platform_device *pdev) * it can allocate all necessary resources then calls the * nand layer to look for devices */ -static int bf5xx_nand_probe(struct platform_device *pdev) +static int __devinit bf5xx_nand_probe(struct platform_device *pdev) { struct bf5xx_nand_platform *plat = to_nand_plat(pdev); struct bf5xx_nand_info *info = NULL; @@ -815,7 +815,7 @@ static int bf5xx_nand_resume(struct platform_device *dev) /* driver device registration */ static struct platform_driver bf5xx_nand_driver = { .probe = bf5xx_nand_probe, - .remove = bf5xx_nand_remove, + .remove = __devexit_p(bf5xx_nand_remove), .suspend = bf5xx_nand_suspend, .resume = bf5xx_nand_resume, .driver = { -- GitLab From a0dd20184becf5c90996d9ee0bb69426fe63581a Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 30 Jul 2008 12:35:02 -0700 Subject: [PATCH 0548/1024] [MTD] [NAND] Blackfin NFC Driver: enable Blackfin nand HWECC support by default Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index c075b47e11a..02f9cc30d77 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -104,6 +104,7 @@ config MTD_NAND_BF5XX config MTD_NAND_BF5XX_HWECC bool "BF5XX NAND Hardware ECC" + default y depends on MTD_NAND_BF5XX help Enable the use of the BF5XX's internal ECC generator when -- GitLab From 0ee002b041cb45ab3cc5384b86271d41ccf90fe1 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 30 Jul 2008 12:35:03 -0700 Subject: [PATCH 0549/1024] [MTD] [NAND] Blackfin NFC Driver: use standard dev_err() rather than printk() Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/bf5xx_nand.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index e259a7b75b2..6cf7fb86c25 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -684,8 +684,7 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "(%p)\n", pdev); if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) { - printk(KERN_ERR DRV_NAME - ": Requesting Peripherals failed\n"); + dev_err(&pdev->dev, "requesting Peripherals failed\n"); return -EFAULT; } -- GitLab From 4f0ca70e52b67f41287d853f0d572dafa875e485 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Wed, 30 Jul 2008 12:35:04 -0700 Subject: [PATCH 0550/1024] [MTD] [NAND] Blackfin NFC Driver: Cleanup the error exit path of bf5xx_nand_probe function Signed-off-by: Bryan Wu Cc: Mike Frysinger Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/bf5xx_nand.c | 38 ++++++++++++++++++++++------------- 1 file changed, 24 insertions(+), 14 deletions(-) diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 6cf7fb86c25..9af2a2cc115 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -549,7 +549,6 @@ static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd, /* * System initialization functions */ - static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info) { int ret; @@ -582,6 +581,13 @@ static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info) return 0; } +static void bf5xx_nand_dma_remove(struct bf5xx_nand_info *info) +{ + /* Free NFC DMA channel */ + if (hardware_ecc) + free_dma(CH_NFC); +} + /* * BF5XX NFC hardware initialization * - pin mux setup @@ -658,6 +664,7 @@ static int __devexit bf5xx_nand_remove(struct platform_device *pdev) } peripheral_free_list(bfin_nfc_pin_req); + bf5xx_nand_dma_remove(info); /* free the common resources */ kfree(info); @@ -683,21 +690,21 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "(%p)\n", pdev); + if (!plat) { + dev_err(&pdev->dev, "no platform specific information\n"); + return -EINVAL; + } + if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) { dev_err(&pdev->dev, "requesting Peripherals failed\n"); return -EFAULT; } - if (!plat) { - dev_err(&pdev->dev, "no platform specific information\n"); - goto exit_error; - } - info = kzalloc(sizeof(*info), GFP_KERNEL); if (info == NULL) { dev_err(&pdev->dev, "no memory for flash info\n"); err = -ENOMEM; - goto exit_error; + goto out_err_kzalloc; } platform_set_drvdata(pdev, info); @@ -741,8 +748,8 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev) /* initialise the hardware */ err = bf5xx_nand_hw_init(info); - if (err != 0) - goto exit_error; + if (err) + goto out_err_hw_init; /* setup hardware ECC data struct */ if (hardware_ecc) { @@ -772,7 +779,7 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev) /* scan hardware nand chip and setup mtd info data struct */ if (nand_scan(mtd, 1)) { err = -ENXIO; - goto exit_error; + goto out_err_nand_scan; } /* add NAND partition */ @@ -781,11 +788,14 @@ static int __devinit bf5xx_nand_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "initialised ok\n"); return 0; -exit_error: - bf5xx_nand_remove(pdev); +out_err_nand_scan: + bf5xx_nand_dma_remove(info); +out_err_hw_init: + platform_set_drvdata(pdev, NULL); + kfree(info); +out_err_kzalloc: + peripheral_free_list(bfin_nfc_pin_req); - if (err == 0) - err = -EINVAL; return err; } -- GitLab From e4c094a595ba8ea402e6b2153f7bbf6ef039eea0 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 30 Jul 2008 12:35:04 -0700 Subject: [PATCH 0551/1024] [MTD] [NAND] drivers/mtd/nand/nandsim.c: fix printk warnings Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/nand/nandsim.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 5d08514f553..556e8131ecd 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -586,7 +586,8 @@ static int init_nandsim(struct mtd_info *mtd) if (ns->busw == 16) NS_WARN("16-bit flashes support wasn't tested\n"); - printk("flash size: %llu MiB\n", ns->geom.totsz >> 20); + printk("flash size: %llu MiB\n", + (unsigned long long)ns->geom.totsz >> 20); printk("page size: %u bytes\n", ns->geom.pgsz); printk("OOB area size: %u bytes\n", ns->geom.oobsz); printk("sector size: %u KiB\n", ns->geom.secsz >> 10); @@ -595,8 +596,9 @@ static int init_nandsim(struct mtd_info *mtd) printk("bus width: %u\n", ns->busw); printk("bits in sector size: %u\n", ns->geom.secshift); printk("bits in page size: %u\n", ns->geom.pgshift); - printk("bits in OOB size: %u\n", ns->geom.oobshift); - printk("flash size with OOB: %llu KiB\n", ns->geom.totszoob >> 10); + printk("bits in OOB size: %u\n", ns->geom.oobshift); + printk("flash size with OOB: %llu KiB\n", + (unsigned long long)ns->geom.totszoob >> 10); printk("page address bytes: %u\n", ns->geom.pgaddrbytes); printk("sector address bytes: %u\n", ns->geom.secaddrbytes); printk("options: %#x\n", ns->options); -- GitLab From f418b006079ce537daf9436215f1d2a47e451602 Mon Sep 17 00:00:00 2001 From: Stephen Smalley Date: Mon, 28 Jul 2008 13:32:38 -0400 Subject: [PATCH 0552/1024] Re: BUG at security/selinux/avc.c:883 (was: Re: linux-next: Tree for July 17: early crash on x86-64) SELinux needs MAY_APPEND to be passed down to the security hook. Otherwise, we get permission denials when only append permission is granted by policy even if the opening process specified O_APPEND. Shows up as a regression in the ltp selinux testsuite, fixed by this patch. Signed-off-by: Stephen Smalley Signed-off-by: Al Viro --- fs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index a7b0a0b8012..b91e9732b24 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -274,7 +274,7 @@ int inode_permission(struct inode *inode, int mask) return retval; return security_inode_permission(inode, - mask & (MAY_READ|MAY_WRITE|MAY_EXEC)); + mask & (MAY_READ|MAY_WRITE|MAY_EXEC|MAY_APPEND)); } /** -- GitLab From a1bc6eb4b499ae67ada9a01660010580b6569403 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 30 Jul 2008 06:32:52 -0400 Subject: [PATCH 0553/1024] [PATCH] ipv4_static_sysctl_init() should be under CONFIG_SYSCTL Signed-off-by: Al Viro --- net/ipv4/route.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 380d6474cf6..a72a5ad46ec 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -3216,6 +3216,7 @@ int __init ip_rt_init(void) return rc; } +#ifdef CONFIG_SYSCTL /* * We really need to sanitize the damn ipv4 init order, then all * this nonsense will go away. @@ -3224,6 +3225,7 @@ void __init ip_static_sysctl_init(void) { register_sysctl_paths(ipv4_route_path, ipv4_route_table); } +#endif EXPORT_SYMBOL(__ip_select_ident); EXPORT_SYMBOL(ip_route_input); -- GitLab From 1027abe8827b47f7e9c4ed6514fde3d44f79963c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 30 Jul 2008 04:13:04 -0400 Subject: [PATCH 0554/1024] [PATCH] merge locate_fd() and get_unused_fd() New primitive: alloc_fd(start, flags). get_unused_fd() and get_unused_fd_flags() become wrappers on top of it. Signed-off-by: Al Viro --- fs/fcntl.c | 87 +++++++------------------------------------- fs/file.c | 61 +++++++++++++++++++++++++++++++ fs/open.c | 56 ---------------------------- include/linux/file.h | 3 +- 4 files changed, 77 insertions(+), 130 deletions(-) diff --git a/fs/fcntl.c b/fs/fcntl.c index 61d62513681..2e40799daad 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -49,73 +49,6 @@ static int get_close_on_exec(unsigned int fd) return res; } -/* - * locate_fd finds a free file descriptor in the open_fds fdset, - * expanding the fd arrays if necessary. Must be called with the - * file_lock held for write. - */ - -static int locate_fd(unsigned int orig_start, int cloexec) -{ - struct files_struct *files = current->files; - unsigned int newfd; - unsigned int start; - int error; - struct fdtable *fdt; - - spin_lock(&files->file_lock); -repeat: - fdt = files_fdtable(files); - /* - * Someone might have closed fd's in the range - * orig_start..fdt->next_fd - */ - start = orig_start; - if (start < files->next_fd) - start = files->next_fd; - - newfd = start; - if (start < fdt->max_fds) - newfd = find_next_zero_bit(fdt->open_fds->fds_bits, - fdt->max_fds, start); - - error = expand_files(files, newfd); - if (error < 0) - goto out; - - /* - * If we needed to expand the fs array we - * might have blocked - try again. - */ - if (error) - goto repeat; - - if (start <= files->next_fd) - files->next_fd = newfd + 1; - - FD_SET(newfd, fdt->open_fds); - if (cloexec) - FD_SET(newfd, fdt->close_on_exec); - else - FD_CLR(newfd, fdt->close_on_exec); - error = newfd; - -out: - spin_unlock(&files->file_lock); - return error; -} - -static int dupfd(struct file *file, unsigned int start, int cloexec) -{ - int fd = locate_fd(start, cloexec); - if (fd >= 0) - fd_install(fd, file); - else - fput(file); - - return fd; -} - asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags) { int err = -EBADF; @@ -194,10 +127,15 @@ asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd) asmlinkage long sys_dup(unsigned int fildes) { int ret = -EBADF; - struct file * file = fget(fildes); - - if (file) - ret = dupfd(file, 0, 0); + struct file *file = fget(fildes); + + if (file) { + ret = get_unused_fd(); + if (ret >= 0) + fd_install(ret, file); + else + fput(file); + } return ret; } @@ -322,8 +260,11 @@ static long do_fcntl(int fd, unsigned int cmd, unsigned long arg, case F_DUPFD_CLOEXEC: if (arg >= current->signal->rlim[RLIMIT_NOFILE].rlim_cur) break; - get_file(filp); - err = dupfd(filp, arg, cmd == F_DUPFD_CLOEXEC); + err = alloc_fd(arg, cmd == F_DUPFD_CLOEXEC ? O_CLOEXEC : 0); + if (err >= 0) { + get_file(filp); + fd_install(err, filp); + } break; case F_GETFD: err = get_close_on_exec(fd) ? FD_CLOEXEC : 0; diff --git a/fs/file.c b/fs/file.c index d8773b19fe4..f313314f996 100644 --- a/fs/file.c +++ b/fs/file.c @@ -6,6 +6,7 @@ * Manage the dynamic fd arrays in the process files_struct. */ +#include #include #include #include @@ -432,3 +433,63 @@ struct files_struct init_files = { }, .file_lock = __SPIN_LOCK_UNLOCKED(init_task.file_lock), }; + +/* + * allocate a file descriptor, mark it busy. + */ +int alloc_fd(unsigned start, unsigned flags) +{ + struct files_struct *files = current->files; + unsigned int fd; + int error; + struct fdtable *fdt; + + spin_lock(&files->file_lock); +repeat: + fdt = files_fdtable(files); + fd = start; + if (fd < files->next_fd) + fd = files->next_fd; + + if (fd < fdt->max_fds) + fd = find_next_zero_bit(fdt->open_fds->fds_bits, + fdt->max_fds, fd); + + error = expand_files(files, fd); + if (error < 0) + goto out; + + /* + * If we needed to expand the fs array we + * might have blocked - try again. + */ + if (error) + goto repeat; + + if (start <= files->next_fd) + files->next_fd = fd + 1; + + FD_SET(fd, fdt->open_fds); + if (flags & O_CLOEXEC) + FD_SET(fd, fdt->close_on_exec); + else + FD_CLR(fd, fdt->close_on_exec); + error = fd; +#if 1 + /* Sanity check */ + if (rcu_dereference(fdt->fd[fd]) != NULL) { + printk(KERN_WARNING "alloc_fd: slot %d not NULL!\n", fd); + rcu_assign_pointer(fdt->fd[fd], NULL); + } +#endif + +out: + spin_unlock(&files->file_lock); + return error; +} + +int get_unused_fd(void) +{ + return alloc_fd(0, 0); +} +EXPORT_SYMBOL(get_unused_fd); diff --git a/fs/open.c b/fs/open.c index 52647be277a..07da9359481 100644 --- a/fs/open.c +++ b/fs/open.c @@ -963,62 +963,6 @@ struct file *dentry_open(struct dentry *dentry, struct vfsmount *mnt, int flags) } EXPORT_SYMBOL(dentry_open); -/* - * Find an empty file descriptor entry, and mark it busy. - */ -int get_unused_fd_flags(int flags) -{ - struct files_struct * files = current->files; - int fd, error; - struct fdtable *fdt; - - spin_lock(&files->file_lock); - -repeat: - fdt = files_fdtable(files); - fd = find_next_zero_bit(fdt->open_fds->fds_bits, fdt->max_fds, - files->next_fd); - - /* Do we need to expand the fd array or fd set? */ - error = expand_files(files, fd); - if (error < 0) - goto out; - - if (error) { - /* - * If we needed to expand the fs array we - * might have blocked - try again. - */ - goto repeat; - } - - FD_SET(fd, fdt->open_fds); - if (flags & O_CLOEXEC) - FD_SET(fd, fdt->close_on_exec); - else - FD_CLR(fd, fdt->close_on_exec); - files->next_fd = fd + 1; -#if 1 - /* Sanity check */ - if (fdt->fd[fd] != NULL) { - printk(KERN_WARNING "get_unused_fd: slot %d not NULL!\n", fd); - fdt->fd[fd] = NULL; - } -#endif - error = fd; - -out: - spin_unlock(&files->file_lock); - return error; -} - -int get_unused_fd(void) -{ - return get_unused_fd_flags(0); -} - -EXPORT_SYMBOL(get_unused_fd); - static void __put_unused_fd(struct files_struct *files, unsigned int fd) { struct fdtable *fdt = files_fdtable(files); diff --git a/include/linux/file.h b/include/linux/file.h index 27c64bdc68c..a20259e248a 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -34,8 +34,9 @@ extern struct file *fget(unsigned int fd); extern struct file *fget_light(unsigned int fd, int *fput_needed); extern void set_close_on_exec(unsigned int fd, int flag); extern void put_filp(struct file *); +extern int alloc_fd(unsigned start, unsigned flags); extern int get_unused_fd(void); -extern int get_unused_fd_flags(int flags); +#define get_unused_fd_flags(flags) alloc_fd(0, (flags)) extern void put_unused_fd(unsigned int fd); extern void fd_install(unsigned int fd, struct file *file); -- GitLab From 1b7e190b4764ea3ca1080404dd593eae5230d2b3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 30 Jul 2008 06:18:03 -0400 Subject: [PATCH 0555/1024] [PATCH] clean dup2() up a bit Signed-off-by: Al Viro --- fs/fcntl.c | 53 +++++++++++++++++++++++++++-------------------------- 1 file changed, 27 insertions(+), 26 deletions(-) diff --git a/fs/fcntl.c b/fs/fcntl.c index 2e40799daad..ac4f7db9f13 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -63,31 +63,35 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags) return -EINVAL; spin_lock(&files->file_lock); - if (!(file = fcheck(oldfd))) - goto out_unlock; - get_file(file); /* We are now finished with oldfd */ - err = expand_files(files, newfd); + file = fcheck(oldfd); + if (unlikely(!file)) + goto Ebadf; if (unlikely(err < 0)) { if (err == -EMFILE) - err = -EBADF; - goto out_fput; + goto Ebadf; + goto out_unlock; } - - /* To avoid races with open() and dup(), we will mark the fd as - * in-use in the open-file bitmap throughout the entire dup2() - * process. This is quite safe: do_close() uses the fd array - * entry, not the bitmap, to decide what work needs to be - * done. --sct */ - /* Doesn't work. open() might be there first. --AV */ - - /* Yes. It's a race. In user space. Nothing sane to do */ + /* + * We need to detect attempts to do dup2() over allocated but still + * not finished descriptor. NB: OpenBSD avoids that at the price of + * extra work in their equivalent of fget() - they insert struct + * file immediately after grabbing descriptor, mark it larval if + * more work (e.g. actual opening) is needed and make sure that + * fget() treats larval files as absent. Potentially interesting, + * but while extra work in fget() is trivial, locking implications + * and amount of surgery on open()-related paths in VFS are not. + * FreeBSD fails with -EBADF in the same situation, NetBSD "solution" + * deadlocks in rather amusing ways, AFAICS. All of that is out of + * scope of POSIX or SUS, since neither considers shared descriptor + * tables and this condition does not arise without those. + */ err = -EBUSY; fdt = files_fdtable(files); tofree = fdt->fd[newfd]; if (!tofree && FD_ISSET(newfd, fdt->open_fds)) - goto out_fput; - + goto out_unlock; + get_file(file); rcu_assign_pointer(fdt->fd[newfd], file); FD_SET(newfd, fdt->open_fds); if (flags & O_CLOEXEC) @@ -98,17 +102,14 @@ asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags) if (tofree) filp_close(tofree, files); - err = newfd; -out: - return err; -out_unlock: - spin_unlock(&files->file_lock); - goto out; -out_fput: + return newfd; + +Ebadf: + err = -EBADF; +out_unlock: spin_unlock(&files->file_lock); - fput(file); - goto out; + return err; } asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd) -- GitLab From 77e69dac3cefacee939cb107ae9cd520a62338e0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 1 Aug 2008 04:29:18 -0400 Subject: [PATCH 0556/1024] [PATCH] fix races and leaks in vfs_quota_on() users * new helper: vfs_quota_on_path(); equivalent of vfs_quota_on() sans the pathname resolution. * callers of vfs_quota_on() that do their own pathname resolution and checks based on it are switched to vfs_quota_on_path(); that way we avoid the races. * reiserfs leaked dentry/vfsmount references on several failure exits. Signed-off-by: Al Viro --- fs/dquot.c | 33 ++++++++++++++++++++------------- fs/ext3/super.c | 3 ++- fs/ext4/super.c | 3 ++- fs/reiserfs/super.c | 16 +++++++++------- include/linux/quotaops.h | 2 ++ 5 files changed, 35 insertions(+), 22 deletions(-) diff --git a/fs/dquot.c b/fs/dquot.c index 1346eebe74c..8ec4d6cc763 100644 --- a/fs/dquot.c +++ b/fs/dquot.c @@ -1793,6 +1793,21 @@ static int vfs_quota_on_remount(struct super_block *sb, int type) return ret; } +int vfs_quota_on_path(struct super_block *sb, int type, int format_id, + struct path *path) +{ + int error = security_quota_on(path->dentry); + if (error) + return error; + /* Quota file not on the same filesystem? */ + if (path->mnt->mnt_sb != sb) + error = -EXDEV; + else + error = vfs_quota_on_inode(path->dentry->d_inode, type, + format_id); + return error; +} + /* Actual function called from quotactl() */ int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path, int remount) @@ -1804,19 +1819,10 @@ int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path, return vfs_quota_on_remount(sb, type); error = path_lookup(path, LOOKUP_FOLLOW, &nd); - if (error < 0) - return error; - error = security_quota_on(nd.path.dentry); - if (error) - goto out_path; - /* Quota file not on the same filesystem? */ - if (nd.path.mnt->mnt_sb != sb) - error = -EXDEV; - else - error = vfs_quota_on_inode(nd.path.dentry->d_inode, type, - format_id); -out_path: - path_put(&nd.path); + if (!error) { + error = vfs_quota_on_path(sb, type, format_id, &nd.path); + path_put(&nd.path); + } return error; } @@ -2185,6 +2191,7 @@ EXPORT_SYMBOL(unregister_quota_format); EXPORT_SYMBOL(dqstats); EXPORT_SYMBOL(dq_data_lock); EXPORT_SYMBOL(vfs_quota_on); +EXPORT_SYMBOL(vfs_quota_on_path); EXPORT_SYMBOL(vfs_quota_on_mount); EXPORT_SYMBOL(vfs_quota_off); EXPORT_SYMBOL(vfs_quota_sync); diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 8ddced38467..f38a5afc39a 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -2810,8 +2810,9 @@ static int ext3_quota_on(struct super_block *sb, int type, int format_id, journal_unlock_updates(EXT3_SB(sb)->s_journal); } + err = vfs_quota_on_path(sb, type, format_id, &nd.path); path_put(&nd.path); - return vfs_quota_on(sb, type, format_id, path, remount); + return err; } /* Read data from quotafile - avoid pagecache and such because we cannot afford diff --git a/fs/ext4/super.c b/fs/ext4/super.c index b5479b1dff1..1e69f29a8c5 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3352,8 +3352,9 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id, jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal); } + err = vfs_quota_on_path(sb, type, format_id, &nd.path); path_put(&nd.path); - return vfs_quota_on(sb, type, format_id, path, remount); + return err; } /* Read data from quotafile - avoid pagecache and such because we cannot afford diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index 879e54d35c2..282a13596c7 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -2076,8 +2076,8 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id, return err; /* Quotafile not on the same filesystem? */ if (nd.path.mnt->mnt_sb != sb) { - path_put(&nd.path); - return -EXDEV; + err = -EXDEV; + goto out; } inode = nd.path.dentry->d_inode; /* We must not pack tails for quota files on reiserfs for quota IO to work */ @@ -2087,8 +2087,8 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id, reiserfs_warning(sb, "reiserfs: Unpacking tail of quota file failed" " (%d). Cannot turn on quotas.", err); - path_put(&nd.path); - return -EINVAL; + err = -EINVAL; + goto out; } mark_inode_dirty(inode); } @@ -2109,13 +2109,15 @@ static int reiserfs_quota_on(struct super_block *sb, int type, int format_id, /* Just start temporary transaction and finish it */ err = journal_begin(&th, sb, 1); if (err) - return err; + goto out; err = journal_end_sync(&th, sb, 1); if (err) - return err; + goto out; } + err = vfs_quota_on_path(sb, type, format_id, &nd.path); +out: path_put(&nd.path); - return vfs_quota_on(sb, type, format_id, path, 0); + return err; } /* Read data from quotafile - avoid pagecache and such because we cannot afford diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 742187f7a05..ca6b9b5c8d5 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -43,6 +43,8 @@ int dquot_mark_dquot_dirty(struct dquot *dquot); int vfs_quota_on(struct super_block *sb, int type, int format_id, char *path, int remount); +int vfs_quota_on_path(struct super_block *sb, int type, int format_id, + struct path *path); int vfs_quota_on_mount(struct super_block *sb, char *qf_name, int format_id, int type); int vfs_quota_off(struct super_block *sb, int type, int remount); -- GitLab From 8266602033d6adc6d10cb8811c1fd694767909b0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 1 Aug 2008 05:32:04 -0400 Subject: [PATCH 0557/1024] [PATCH] fix bdev leak in block_dev.c do_open() Callers expect it to drop reference to bdev on all failure exits. Signed-off-by: Al Viro --- fs/block_dev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/block_dev.c b/fs/block_dev.c index dcf37cada36..e664b0b7048 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -941,8 +941,10 @@ static int do_open(struct block_device *bdev, struct file *file, int for_part) * hooks: /n/, see "layering violations". */ ret = devcgroup_inode_permission(bdev->bd_inode, perm); - if (ret != 0) + if (ret != 0) { + bdput(bdev); return ret; + } ret = -ENXIO; file->f_mapping = bdev->bd_inode->i_mapping; -- GitLab From 67935df49dae836fa86621861979fafdfd37ae59 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 26 Jul 2008 11:18:28 +0400 Subject: [PATCH 0558/1024] [PATCH 1/2] proc: fix inode number bogorithmetic Id which proc gets from IDR for inode number and id which proc removes from IDR do not match. E.g. 0x11a transforms into 0x8000011a. Which stayed unnoticed for a long time because, surprise, idr_remove() masks out that high bit before doing anything. All of this due to "| ~MAX_ID_MASK" in release_inode_number(). I still don't understand how it's supposed to work, because "| ~MASK" is not an inversion for "& MAX" operation. So, use just one nice, working addition. Make start offset unsigned int, while I'm at it. It's longness is not used anywhere. Signed-off-by: Alexey Dobriyan Signed-off-by: Al Viro --- fs/proc/generic.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/fs/proc/generic.c b/fs/proc/generic.c index cb4096cc3fb..b85e36e153b 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -303,7 +303,7 @@ out: static DEFINE_IDR(proc_inum_idr); static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */ -#define PROC_DYNAMIC_FIRST 0xF0000000UL +#define PROC_DYNAMIC_FIRST 0xF0000000U /* * Return an inode number between PROC_DYNAMIC_FIRST and @@ -311,7 +311,7 @@ static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */ */ static unsigned int get_inode_number(void) { - int i, inum = 0; + unsigned int i; int error; retry: @@ -326,21 +326,18 @@ retry: else if (error) return 0; - inum = (i & MAX_ID_MASK) + PROC_DYNAMIC_FIRST; - - /* inum will never be more than 0xf0ffffff, so no check - * for overflow. - */ - - return inum; + if (i > UINT_MAX - PROC_DYNAMIC_FIRST) { + spin_lock(&proc_inum_lock); + idr_remove(&proc_inum_idr, i); + spin_unlock(&proc_inum_lock); + } + return PROC_DYNAMIC_FIRST + i; } static void release_inode_number(unsigned int inum) { - int id = (inum - PROC_DYNAMIC_FIRST) | ~MAX_ID_MASK; - spin_lock(&proc_inum_lock); - idr_remove(&proc_inum_idr, id); + idr_remove(&proc_inum_idr, inum - PROC_DYNAMIC_FIRST); spin_unlock(&proc_inum_lock); } -- GitLab From 9a18540915faaaadd7f71c16fa877a0c19675923 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 26 Jul 2008 11:21:37 +0400 Subject: [PATCH 0559/1024] [PATCH 2/2] proc: switch inode number allocation to IDA proc doesn't use "associate pointer with id" feature of IDR, so switch to IDA. NOTE, NOTE, NOTE: Do not apply if release_inode_number() still mantions MAX_ID_MASK! Signed-off-by: Alexey Dobriyan Signed-off-by: Al Viro --- fs/proc/generic.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/proc/generic.c b/fs/proc/generic.c index b85e36e153b..4fb81e9c94e 100644 --- a/fs/proc/generic.c +++ b/fs/proc/generic.c @@ -300,7 +300,7 @@ out: return rtn; } -static DEFINE_IDR(proc_inum_idr); +static DEFINE_IDA(proc_inum_ida); static DEFINE_SPINLOCK(proc_inum_lock); /* protects the above */ #define PROC_DYNAMIC_FIRST 0xF0000000U @@ -315,11 +315,11 @@ static unsigned int get_inode_number(void) int error; retry: - if (idr_pre_get(&proc_inum_idr, GFP_KERNEL) == 0) + if (ida_pre_get(&proc_inum_ida, GFP_KERNEL) == 0) return 0; spin_lock(&proc_inum_lock); - error = idr_get_new(&proc_inum_idr, NULL, &i); + error = ida_get_new(&proc_inum_ida, &i); spin_unlock(&proc_inum_lock); if (error == -EAGAIN) goto retry; @@ -328,7 +328,7 @@ retry: if (i > UINT_MAX - PROC_DYNAMIC_FIRST) { spin_lock(&proc_inum_lock); - idr_remove(&proc_inum_idr, i); + ida_remove(&proc_inum_ida, i); spin_unlock(&proc_inum_lock); } return PROC_DYNAMIC_FIRST + i; @@ -337,7 +337,7 @@ retry: static void release_inode_number(unsigned int inum) { spin_lock(&proc_inum_lock); - idr_remove(&proc_inum_idr, inum - PROC_DYNAMIC_FIRST); + ida_remove(&proc_inum_ida, inum - PROC_DYNAMIC_FIRST); spin_unlock(&proc_inum_lock); } -- GitLab From 7ee7c12b7121cd49d528de219e4ffd5459657998 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Sat, 26 Jul 2008 11:42:16 +0400 Subject: [PATCH 0560/1024] [PATCH] devpts: switch to IDA Devpts code wants just numbers for tty indexes. Signed-off-by: Alexey Dobriyan Signed-off-by: Al Viro --- fs/devpts/inode.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c index 285b64a8b06..488eb424f66 100644 --- a/fs/devpts/inode.c +++ b/fs/devpts/inode.c @@ -29,7 +29,7 @@ #define DEVPTS_DEFAULT_MODE 0600 extern int pty_limit; /* Config limit on Unix98 ptys */ -static DEFINE_IDR(allocated_ptys); +static DEFINE_IDA(allocated_ptys); static DEFINE_MUTEX(allocated_ptys_lock); static struct vfsmount *devpts_mnt; @@ -180,24 +180,24 @@ static struct dentry *get_node(int num) int devpts_new_index(void) { int index; - int idr_ret; + int ida_ret; retry: - if (!idr_pre_get(&allocated_ptys, GFP_KERNEL)) { + if (!ida_pre_get(&allocated_ptys, GFP_KERNEL)) { return -ENOMEM; } mutex_lock(&allocated_ptys_lock); - idr_ret = idr_get_new(&allocated_ptys, NULL, &index); - if (idr_ret < 0) { + ida_ret = ida_get_new(&allocated_ptys, &index); + if (ida_ret < 0) { mutex_unlock(&allocated_ptys_lock); - if (idr_ret == -EAGAIN) + if (ida_ret == -EAGAIN) goto retry; return -EIO; } if (index >= pty_limit) { - idr_remove(&allocated_ptys, index); + ida_remove(&allocated_ptys, index); mutex_unlock(&allocated_ptys_lock); return -EIO; } @@ -208,7 +208,7 @@ retry: void devpts_kill_index(int idx) { mutex_lock(&allocated_ptys_lock); - idr_remove(&allocated_ptys, idx); + ida_remove(&allocated_ptys, idx); mutex_unlock(&allocated_ptys_lock); } -- GitLab From a95164d979c5ca061f15bcaadc829c146693d4d9 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 30 Jul 2008 15:08:48 +0200 Subject: [PATCH 0561/1024] [patch 3/4] vfs: remove unused nameidata argument of may_create() Signed-off-by: Miklos Szeredi Signed-off-by: Al Viro --- fs/namei.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index b91e9732b24..4ea63ed5e79 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1431,8 +1431,7 @@ static int may_delete(struct inode *dir,struct dentry *victim,int isdir) * 3. We should have write and exec permissions on dir * 4. We can't do it if dir is immutable (done in permission()) */ -static inline int may_create(struct inode *dir, struct dentry *child, - struct nameidata *nd) +static inline int may_create(struct inode *dir, struct dentry *child) { if (child->d_inode) return -EEXIST; @@ -1504,7 +1503,7 @@ void unlock_rename(struct dentry *p1, struct dentry *p2) int vfs_create(struct inode *dir, struct dentry *dentry, int mode, struct nameidata *nd) { - int error = may_create(dir, dentry, nd); + int error = may_create(dir, dentry); if (error) return error; @@ -1948,7 +1947,7 @@ EXPORT_SYMBOL_GPL(lookup_create); int vfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev) { - int error = may_create(dir, dentry, NULL); + int error = may_create(dir, dentry); if (error) return error; @@ -2049,7 +2048,7 @@ asmlinkage long sys_mknod(const char __user *filename, int mode, unsigned dev) int vfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) { - int error = may_create(dir, dentry, NULL); + int error = may_create(dir, dentry); if (error) return error; @@ -2316,7 +2315,7 @@ asmlinkage long sys_unlink(const char __user *pathname) int vfs_symlink(struct inode *dir, struct dentry *dentry, const char *oldname) { - int error = may_create(dir, dentry, NULL); + int error = may_create(dir, dentry); if (error) return error; @@ -2386,7 +2385,7 @@ int vfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_de if (!inode) return -ENOENT; - error = may_create(dir, new_dentry, NULL); + error = may_create(dir, new_dentry); if (error) return error; @@ -2595,7 +2594,7 @@ int vfs_rename(struct inode *old_dir, struct dentry *old_dentry, return error; if (!new_dentry->d_inode) - error = may_create(new_dir, new_dentry, NULL); + error = may_create(new_dir, new_dentry); else error = may_delete(new_dir, new_dentry, is_dir); if (error) -- GitLab From d5686b444ff3f72808d2b3fbd58672a86cdf38e7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 1 Aug 2008 05:00:11 -0400 Subject: [PATCH 0562/1024] [PATCH] switch mtd and dm-table to lookup_bdev() No need to open-code it... Signed-off-by: Al Viro --- drivers/md/dm-table.c | 29 ++++++----------------------- drivers/mtd/mtdsuper.c | 33 +++++++++++---------------------- fs/block_dev.c | 1 + 3 files changed, 18 insertions(+), 45 deletions(-) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 798e468103b..61f44140923 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -316,29 +316,12 @@ static inline int check_space(struct dm_table *t) */ static int lookup_device(const char *path, dev_t *dev) { - int r; - struct nameidata nd; - struct inode *inode; - - if ((r = path_lookup(path, LOOKUP_FOLLOW, &nd))) - return r; - - inode = nd.path.dentry->d_inode; - if (!inode) { - r = -ENOENT; - goto out; - } - - if (!S_ISBLK(inode->i_mode)) { - r = -ENOTBLK; - goto out; - } - - *dev = inode->i_rdev; - - out: - path_put(&nd.path); - return r; + struct block_device *bdev = lookup_bdev(path); + if (IS_ERR(bdev)) + return PTR_ERR(bdev); + *dev = bdev->bd_dev; + bdput(bdev); + return 0; } /* diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c index 28cc6787a80..9b6af7e74a6 100644 --- a/drivers/mtd/mtdsuper.c +++ b/drivers/mtd/mtdsuper.c @@ -125,7 +125,7 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags, int (*fill_super)(struct super_block *, void *, int), struct vfsmount *mnt) { - struct nameidata nd; + struct block_device *bdev; int mtdnr, ret; if (!dev_name) @@ -181,29 +181,20 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags, /* try the old way - the hack where we allowed users to mount * /dev/mtdblock$(n) but didn't actually _use_ the blockdev */ - ret = path_lookup(dev_name, LOOKUP_FOLLOW, &nd); - - DEBUG(1, "MTDSB: path_lookup() returned %d, inode %p\n", - ret, nd.path.dentry ? nd.path.dentry->d_inode : NULL); - - if (ret) + bdev = lookup_bdev(dev_name); + if (IS_ERR(bdev)) { + ret = PTR_ERR(bdev); + DEBUG(1, "MTDSB: lookup_bdev() returned %d\n", ret); return ret; - - ret = -EINVAL; - - if (!S_ISBLK(nd.path.dentry->d_inode->i_mode)) - goto out; - - if (nd.path.mnt->mnt_flags & MNT_NODEV) { - ret = -EACCES; - goto out; } + DEBUG(1, "MTDSB: lookup_bdev() returned 0\n"); - if (imajor(nd.path.dentry->d_inode) != MTD_BLOCK_MAJOR) + ret = -EINVAL; + if (MAJOR(bdev->bd_dev) != MTD_BLOCK_MAJOR) goto not_an_MTD_device; - mtdnr = iminor(nd.path.dentry->d_inode); - path_put(&nd.path); + mtdnr = MINOR(bdev->bd_dev); + bdput(bdev); return get_sb_mtd_nr(fs_type, flags, dev_name, data, mtdnr, fill_super, mnt); @@ -213,10 +204,8 @@ not_an_MTD_device: printk(KERN_NOTICE "MTD: Attempt to mount non-MTD device \"%s\"\n", dev_name); -out: - path_put(&nd.path); + bdput(bdev); return ret; - } EXPORT_SYMBOL_GPL(get_sb_mtd); diff --git a/fs/block_dev.c b/fs/block_dev.c index e664b0b7048..aff54219e04 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -1236,6 +1236,7 @@ fail: bdev = ERR_PTR(error); goto out; } +EXPORT_SYMBOL(lookup_bdev); /** * open_bdev_excl - open a block device by name and set it up for use -- GitLab From 8d66bf5481002b0960aa49aed0987c73f5d7816c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 1 Aug 2008 09:05:54 -0400 Subject: [PATCH 0563/1024] [PATCH] pass struct path * to do_add_mount() Signed-off-by: Al Viro --- fs/afs/mntpt.c | 2 +- fs/cifs/cifs_dfs_ref.c | 2 +- fs/namespace.c | 16 ++++++++-------- fs/nfs/namespace.c | 2 +- include/linux/mount.h | 3 ++- 5 files changed, 13 insertions(+), 12 deletions(-) diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c index 2f5503902c3..78db4953a80 100644 --- a/fs/afs/mntpt.c +++ b/fs/afs/mntpt.c @@ -232,7 +232,7 @@ static void *afs_mntpt_follow_link(struct dentry *dentry, struct nameidata *nd) } mntget(newmnt); - err = do_add_mount(newmnt, nd, MNT_SHRINKABLE, &afs_vfsmounts); + err = do_add_mount(newmnt, &nd->path, MNT_SHRINKABLE, &afs_vfsmounts); switch (err) { case 0: path_put(&nd->path); diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index d82374c9e32..d2c8eef84f3 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -226,7 +226,7 @@ static int add_mount_helper(struct vfsmount *newmnt, struct nameidata *nd, int err; mntget(newmnt); - err = do_add_mount(newmnt, nd, nd->path.mnt->mnt_flags, mntlist); + err = do_add_mount(newmnt, &nd->path, nd->path.mnt->mnt_flags, mntlist); switch (err) { case 0: path_put(&nd->path); diff --git a/fs/namespace.c b/fs/namespace.c index 411728c0c8b..6e283c93b50 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1667,31 +1667,31 @@ static noinline int do_new_mount(struct nameidata *nd, char *type, int flags, if (IS_ERR(mnt)) return PTR_ERR(mnt); - return do_add_mount(mnt, nd, mnt_flags, NULL); + return do_add_mount(mnt, &nd->path, mnt_flags, NULL); } /* * add a mount into a namespace's mount tree * - provide the option of adding the new mount to an expiration list */ -int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd, +int do_add_mount(struct vfsmount *newmnt, struct path *path, int mnt_flags, struct list_head *fslist) { int err; down_write(&namespace_sem); /* Something was mounted here while we slept */ - while (d_mountpoint(nd->path.dentry) && - follow_down(&nd->path.mnt, &nd->path.dentry)) + while (d_mountpoint(path->dentry) && + follow_down(&path->mnt, &path->dentry)) ; err = -EINVAL; - if (!check_mnt(nd->path.mnt)) + if (!check_mnt(path->mnt)) goto unlock; /* Refuse the same filesystem on the same mount point */ err = -EBUSY; - if (nd->path.mnt->mnt_sb == newmnt->mnt_sb && - nd->path.mnt->mnt_root == nd->path.dentry) + if (path->mnt->mnt_sb == newmnt->mnt_sb && + path->mnt->mnt_root == path->dentry) goto unlock; err = -EINVAL; @@ -1699,7 +1699,7 @@ int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd, goto unlock; newmnt->mnt_flags = mnt_flags; - if ((err = graft_tree(newmnt, &nd->path))) + if ((err = graft_tree(newmnt, path))) goto unlock; if (fslist) /* add to the specified expiration list */ diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c index 2f285ef7639..66df08dd1ca 100644 --- a/fs/nfs/namespace.c +++ b/fs/nfs/namespace.c @@ -129,7 +129,7 @@ static void * nfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd) goto out_err; mntget(mnt); - err = do_add_mount(mnt, nd, nd->path.mnt->mnt_flags|MNT_SHRINKABLE, + err = do_add_mount(mnt, &nd->path, nd->path.mnt->mnt_flags|MNT_SHRINKABLE, &nfs_automount_list); if (err < 0) { mntput(mnt); diff --git a/include/linux/mount.h b/include/linux/mount.h index b5efaa2132a..30a1d63b6fb 100644 --- a/include/linux/mount.h +++ b/include/linux/mount.h @@ -105,7 +105,8 @@ extern struct vfsmount *vfs_kern_mount(struct file_system_type *type, struct nameidata; -extern int do_add_mount(struct vfsmount *newmnt, struct nameidata *nd, +struct path; +extern int do_add_mount(struct vfsmount *newmnt, struct path *path, int mnt_flags, struct list_head *fslist); extern void mark_mounts_for_expiry(struct list_head *mounts); -- GitLab From ee1d315663ee0b494898f813a266d6244b263b4f Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Mon, 7 Jul 2008 10:49:45 -0400 Subject: [PATCH 0564/1024] [PATCH] Audit: Collect signal info when SIGUSR2 is sent to auditd Makes the kernel audit subsystem collect information about the sending process when that process sends SIGUSR2 to the userspace audit daemon. SIGUSR2 is a new interesting signal to auditd telling auditd that it should try to start logging to disk again and the error condition which caused it to stop logging to disk (usually out of space) has been rectified. Signed-off-by: Eric Paris Signed-off-by: Al Viro --- kernel/auditsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 4699950e65b..580a5389fd9 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -2375,7 +2375,7 @@ int __audit_signal_info(int sig, struct task_struct *t) struct audit_context *ctx = tsk->audit_context; if (audit_pid && t->tgid == audit_pid) { - if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1) { + if (sig == SIGTERM || sig == SIGHUP || sig == SIGUSR1 || sig == SIGUSR2) { audit_sig_pid = tsk->pid; if (tsk->loginuid != -1) audit_sig_uid = tsk->loginuid; -- GitLab From 1d6c9649e236caa2e93e3647256216e57172b011 Mon Sep 17 00:00:00 2001 From: Vesa-Matti J Kari Date: Wed, 23 Jul 2008 00:06:13 +0300 Subject: [PATCH 0565/1024] kernel/audit.c control character detection is off-by-one Hello, According to my understanding there is an off-by-one bug in the function: audit_string_contains_control() in: kernel/audit.c Patch is included. I do not know from how many places the function is called from, but for example, SELinux Access Vector Cache tries to log untrusted filenames via call path: avc_audit() audit_log_untrustedstring() audit_log_n_untrustedstring() audit_string_contains_control() If audit_string_contains_control() detects control characters, then the string is hex-encoded. But the hex=0x7f dec=127, DEL-character, is not detected. I guess this could have at least some minor security implications, since a user can create a filename with 0x7f in it, causing logged filename to possibly look different when someone reads it on the terminal. Signed-off-by: Vesa-Matti Kari Signed-off-by: Al Viro --- kernel/audit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/audit.c b/kernel/audit.c index e092f1c0ce3..6d903182c6b 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -1366,7 +1366,7 @@ int audit_string_contains_control(const char *string, size_t len) { const unsigned char *p; for (p = string; p < (const unsigned char *)string + len && *p; p++) { - if (*p == '"' || *p < 0x21 || *p > 0x7f) + if (*p == '"' || *p < 0x21 || *p > 0x7e) return 1; } return 0; -- GitLab From 036bbf76ad9f83781590623111b80ba0b82930ac Mon Sep 17 00:00:00 2001 From: zhangxiliang Date: Fri, 1 Aug 2008 09:47:01 +0800 Subject: [PATCH 0566/1024] Re: [PATCH] the loginuid field should be output in all AUDIT_CONFIG_CHANGE audit messages > shouldn't these be using the "audit_get_loginuid(current)" and if we > are going to output loginuid we also should be outputting sessionid Thanks for your detailed explanation. I have made a new patch for outputing "loginuid" and "sessionid" by audit_get_loginuid(current) and audit_get_sessionid(current). If there are some deficiencies, please give me your indication. Signed-off-by: Zhang Xiliang Signed-off-by: Al Viro --- kernel/auditfilter.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index 98c50cc671b..b7d354e2b0e 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1022,8 +1022,11 @@ static void audit_update_watch(struct audit_parent *parent, struct audit_buffer *ab; ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE); + audit_log_format(ab, "auid=%u ses=%u", + audit_get_loginuid(current), + audit_get_sessionid(current)); audit_log_format(ab, - "op=updated rules specifying path="); + " op=updated rules specifying path="); audit_log_untrustedstring(ab, owatch->path); audit_log_format(ab, " with dev=%u ino=%lu\n", dev, ino); @@ -1058,7 +1061,10 @@ static void audit_remove_parent_watches(struct audit_parent *parent) struct audit_buffer *ab; ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE); - audit_log_format(ab, "op=remove rule path="); + audit_log_format(ab, "auid=%u ses=%u", + audit_get_loginuid(current), + audit_get_sessionid(current)); + audit_log_format(ab, " op=remove rule path="); audit_log_untrustedstring(ab, w->path); if (r->filterkey) { audit_log_format(ab, " key="); -- GitLab From 980dfb0db340b95094732d78b55311f2c539c1af Mon Sep 17 00:00:00 2001 From: zhangxiliang Date: Fri, 1 Aug 2008 19:15:47 +0800 Subject: [PATCH 0567/1024] [PATCH] Fix the kernel panic of audit_filter_task when key field is set When calling audit_filter_task(), it calls audit_filter_rules() with audit_context is NULL. If the key field is set, the result in audit_filter_rules() will be set to 1 and ctx->filterkey will be set to key. But the ctx is NULL in this condition, so kernel will panic. Signed-off-by: Zhang Xiliang Signed-off-by: Al Viro --- kernel/auditsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 580a5389fd9..496c3dd3727 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -610,7 +610,7 @@ static int audit_filter_rules(struct task_struct *tsk, if (!result) return 0; } - if (rule->filterkey) + if (rule->filterkey && ctx) ctx->filterkey = kstrdup(rule->filterkey, GFP_ATOMIC); switch (rule->action) { case AUDIT_NEVER: *state = AUDIT_DISABLED; break; -- GitLab From 20c6aaa39ab735c7ed78e4e5a214d250efae0a6e Mon Sep 17 00:00:00 2001 From: zhangxiliang Date: Thu, 31 Jul 2008 10:11:19 +0800 Subject: [PATCH 0568/1024] [PATCH] Fix the bug of using AUDIT_STATUS_RATE_LIMIT when set fail, no error output. When the "status_get->mask" is "AUDIT_STATUS_RATE_LIMIT || AUDIT_STATUS_BACKLOG_LIMIT". If "audit_set_rate_limit" fails and "audit_set_backlog_limit" succeeds, the "err" value will be greater than or equal to 0. It will miss the failure of rate set. Signed-off-by: Zhang Xiliang Acked-by: Eric Paris Signed-off-by: Al Viro --- kernel/audit.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/kernel/audit.c b/kernel/audit.c index 6d903182c6b..4414e93d875 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -707,12 +707,14 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) if (status_get->mask & AUDIT_STATUS_ENABLED) { err = audit_set_enabled(status_get->enabled, loginuid, sessionid, sid); - if (err < 0) return err; + if (err < 0) + return err; } if (status_get->mask & AUDIT_STATUS_FAILURE) { err = audit_set_failure(status_get->failure, loginuid, sessionid, sid); - if (err < 0) return err; + if (err < 0) + return err; } if (status_get->mask & AUDIT_STATUS_PID) { int new_pid = status_get->pid; @@ -725,9 +727,12 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) audit_pid = new_pid; audit_nlk_pid = NETLINK_CB(skb).pid; } - if (status_get->mask & AUDIT_STATUS_RATE_LIMIT) + if (status_get->mask & AUDIT_STATUS_RATE_LIMIT) { err = audit_set_rate_limit(status_get->rate_limit, loginuid, sessionid, sid); + if (err < 0) + return err; + } if (status_get->mask & AUDIT_STATUS_BACKLOG_LIMIT) err = audit_set_backlog_limit(status_get->backlog_limit, loginuid, sessionid, sid); -- GitLab From 4a3cba32cb514168bb2516c045b178e6660421d1 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 29 Jul 2008 00:11:16 +0200 Subject: [PATCH 0569/1024] sdhci: handle bug in JMB38x for sizes < 4 bytes Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-pci.c | 3 ++- drivers/mmc/host/sdhci.c | 9 +++++++++ drivers/mmc/host/sdhci.h | 2 ++ 3 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index deb607c52c0..fcb14c2346c 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -143,7 +143,8 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE | SDHCI_QUIRK_32BIT_ADMA_SIZE | - SDHCI_QUIRK_RESET_AFTER_REQUEST; + SDHCI_QUIRK_RESET_AFTER_REQUEST | + SDHCI_QUIRK_BROKEN_SMALL_PIO; } /* diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 5f95e10229b..be09739f692 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -278,6 +278,15 @@ static void sdhci_transfer_pio(struct sdhci_host *host) else mask = SDHCI_SPACE_AVAILABLE; + /* + * Some controllers (JMicron JMB38x) mess up the buffer bits + * for transfers < 4 bytes. As long as it is just one block, + * we can ignore the bits. + */ + if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) && + (host->data->blocks == 1)) + mask = ~0; + while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) { if (host->data->flags & MMC_DATA_READ) sdhci_read_block_pio(host); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index e354faee5df..197d4a05f4a 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -206,6 +206,8 @@ struct sdhci_host { #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11) /* Controller provides an incorrect timeout value for transfers */ #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) +/* Controller has an issue with buffer bits for small transfers */ +#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */ -- GitLab From ebd6d357848edb8709dd9bed4b93834d1b4d7044 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 29 Jul 2008 00:45:51 +0200 Subject: [PATCH 0570/1024] sdhci: disable DMA for req, not completely The wrong flag was manipulated when an invalid sg list was given, turning off DMA on the next (and all subsequent) request instead of the current one. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index be09739f692..9191aaf2e52 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -654,7 +654,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) * us an invalid request. */ WARN_ON(1); - host->flags &= ~SDHCI_USE_DMA; + host->flags &= ~SDHCI_REQ_USE_DMA; } else { writel(host->adma_addr, host->ioaddr + SDHCI_ADMA_ADDRESS); @@ -673,7 +673,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) * us an invalid request. */ WARN_ON(1); - host->flags &= ~SDHCI_USE_DMA; + host->flags &= ~SDHCI_REQ_USE_DMA; } else { WARN_ON(sg_cnt != 1); writel(sg_dma_address(data->sg), -- GitLab From 980167b7fb20fb181766218b4771fc7420a7bbb4 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 29 Jul 2008 00:53:20 +0200 Subject: [PATCH 0571/1024] sdhci: check correct return value Fix a copy-and-paste error. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 9191aaf2e52..e3a8133560a 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -448,7 +448,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host, host->adma_addr = dma_map_single(mmc_dev(host->mmc), host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE); - if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr)) + if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr)) goto unmap_entries; BUG_ON(host->adma_addr & 0x3); -- GitLab From b7ac2cf1cdf346b34cbc2104d386a9d29d12aa4c Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 29 Jul 2008 01:05:22 +0200 Subject: [PATCH 0572/1024] mmc_test: Revert "mmc_test: test oversized sg lists" This reverts commit 48b5352ea1891455eb8e824cf7d92f66931a090f. Oversized sg lists are not allowed anymore, and the core even checks for them in debug mode, so this test is entirely incorrect. Signed-off-by: Pierre Ossman --- drivers/mmc/card/mmc_test.c | 85 ++----------------------------------- 1 file changed, 3 insertions(+), 82 deletions(-) diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index a067fe43630..f26b01d811a 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -388,16 +388,14 @@ static int mmc_test_transfer(struct mmc_test_card *test, int ret, i; unsigned long flags; - BUG_ON(blocks * blksz > BUFFER_SIZE); - if (write) { for (i = 0;i < blocks * blksz;i++) test->scratch[i] = i; } else { - memset(test->scratch, 0, blocks * blksz); + memset(test->scratch, 0, BUFFER_SIZE); } local_irq_save(flags); - sg_copy_from_buffer(sg, sg_len, test->scratch, blocks * blksz); + sg_copy_from_buffer(sg, sg_len, test->scratch, BUFFER_SIZE); local_irq_restore(flags); ret = mmc_test_set_blksize(test, blksz); @@ -444,7 +442,7 @@ static int mmc_test_transfer(struct mmc_test_card *test, } } else { local_irq_save(flags); - sg_copy_to_buffer(sg, sg_len, test->scratch, blocks * blksz); + sg_copy_to_buffer(sg, sg_len, test->scratch, BUFFER_SIZE); local_irq_restore(flags); for (i = 0;i < blocks * blksz;i++) { if (test->scratch[i] != (u8)i) @@ -805,69 +803,6 @@ static int mmc_test_multi_xfersize_read(struct mmc_test_card *test) return 0; } -static int mmc_test_bigsg_write(struct mmc_test_card *test) -{ - int ret; - unsigned int size; - struct scatterlist sg; - - if (test->card->host->max_blk_count == 1) - return RESULT_UNSUP_HOST; - - size = PAGE_SIZE * 2; - size = min(size, test->card->host->max_req_size); - size = min(size, test->card->host->max_seg_size); - size = min(size, test->card->host->max_blk_count * 512); - - memset(test->buffer, 0, BUFFER_SIZE); - - if (size < 1024) - return RESULT_UNSUP_HOST; - - sg_init_table(&sg, 1); - sg_init_one(&sg, test->buffer, BUFFER_SIZE); - - ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1); - if (ret) - return ret; - - return 0; -} - -static int mmc_test_bigsg_read(struct mmc_test_card *test) -{ - int ret, i; - unsigned int size; - struct scatterlist sg; - - if (test->card->host->max_blk_count == 1) - return RESULT_UNSUP_HOST; - - size = PAGE_SIZE * 2; - size = min(size, test->card->host->max_req_size); - size = min(size, test->card->host->max_seg_size); - size = min(size, test->card->host->max_blk_count * 512); - - if (size < 1024) - return RESULT_UNSUP_HOST; - - memset(test->buffer, 0xCD, BUFFER_SIZE); - - sg_init_table(&sg, 1); - sg_init_one(&sg, test->buffer, BUFFER_SIZE); - ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0); - if (ret) - return ret; - - /* mmc_test_transfer() doesn't check for read overflows */ - for (i = size;i < BUFFER_SIZE;i++) { - if (test->buffer[i] != 0xCD) - return RESULT_FAIL; - } - - return 0; -} - #ifdef CONFIG_HIGHMEM static int mmc_test_write_high(struct mmc_test_card *test) @@ -1071,20 +1006,6 @@ static const struct mmc_test_case mmc_test_cases[] = { .run = mmc_test_multi_xfersize_read, }, - { - .name = "Over-sized SG list write", - .prepare = mmc_test_prepare_write, - .run = mmc_test_bigsg_write, - .cleanup = mmc_test_cleanup, - }, - - { - .name = "Over-sized SG list read", - .prepare = mmc_test_prepare_read, - .run = mmc_test_bigsg_read, - .cleanup = mmc_test_cleanup, - }, - #ifdef CONFIG_HIGHMEM { -- GitLab From a84756c5735f28bf000617f18734a9e94426386a Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 29 Jul 2008 01:09:37 +0200 Subject: [PATCH 0573/1024] mmc: properly iterate over sg list in debug check Signed-off-by: Pierre Ossman --- drivers/mmc/core/core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 3ee5b8c3b5c..044d84eeed7 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -121,6 +121,7 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) { #ifdef CONFIG_MMC_DEBUG unsigned int i, sz; + struct scatterlist *sg; #endif pr_debug("%s: starting CMD%u arg %08x flags %08x\n", @@ -156,8 +157,8 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) #ifdef CONFIG_MMC_DEBUG sz = 0; - for (i = 0;i < mrq->data->sg_len;i++) - sz += mrq->data->sg[i].length; + for_each_sg(mrq->data->sg, sg, mrq->data->sg_len, i) + sz += sg->length; BUG_ON(sz != mrq->data->blocks * mrq->data->blksz); #endif -- GitLab From b41e9c7b8e14ea57aa0fc05fd63a0de0e935d58d Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 29 Jul 2008 01:23:24 +0200 Subject: [PATCH 0574/1024] mmc_block: use proper sg iterators Signed-off-by: Pierre Ossman --- drivers/mmc/card/block.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 66e5a5487c2..86dbb366415 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -213,7 +213,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) struct mmc_blk_data *md = mq->data; struct mmc_card *card = md->queue.card; struct mmc_blk_request brq; - int ret = 1, sg_pos, data_size; + int ret = 1, data_size, i; + struct scatterlist *sg; mmc_claim_host(card->host); @@ -267,18 +268,22 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) mmc_queue_bounce_pre(mq); + /* + * Adjust the sg list so it is the same size as the + * request. + */ if (brq.data.blocks != (req->nr_sectors >> (md->block_bits - 9))) { data_size = brq.data.blocks * brq.data.blksz; - for (sg_pos = 0; sg_pos < brq.data.sg_len; sg_pos++) { - data_size -= mq->sg[sg_pos].length; + for_each_sg(brq.data.sg, sg, brq.data.sg_len, i) { + data_size -= sg->length; if (data_size <= 0) { - mq->sg[sg_pos].length += data_size; - sg_pos++; + sg->length += data_size; + i++; break; } } - brq.data.sg_len = sg_pos; + brq.data.sg_len = i; } mmc_wait_for_req(card->host, &brq.mrq); -- GitLab From e491d230fd398bb730e3c2dd734c5447463b9d38 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 29 Jul 2008 10:10:49 +0200 Subject: [PATCH 0575/1024] au1xmmc: raise segment size limit. Raise the DMA block size limit from 2048 bytes to the maximum supported by the DMA controllers on the chip (64KB on Au1100, 4MB on Au1200). This gives a very small performance boost and apparently fixes an oops when MMC-DMA and network traffic are active at the same time. Signed-off-by: Manuel Lauss Signed-off-by: Pierre Ossman --- drivers/mmc/host/au1xmmc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 99b20917cc0..d3f55615c09 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -61,7 +61,13 @@ /* Hardware definitions */ #define AU1XMMC_DESCRIPTOR_COUNT 1 -#define AU1XMMC_DESCRIPTOR_SIZE 2048 + +/* max DMA seg size: 64KB on Au1100, 4MB on Au1200 */ +#ifdef CONFIG_SOC_AU1100 +#define AU1XMMC_DESCRIPTOR_SIZE 0x0000ffff +#else /* Au1200 */ +#define AU1XMMC_DESCRIPTOR_SIZE 0x003fffff +#endif #define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \ MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \ -- GitLab From 7f30491ccd28627742e37899453ae20e3da8e18f Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Fri, 1 Aug 2008 10:13:32 -0700 Subject: [PATCH 0576/1024] [IA64] Move include/asm-ia64 to arch/ia64/include/asm After moving the the include files there were a few clean-ups: 1) Some files used #include , changed to 2) Some comments alerted maintainers to look at various header files to make matching updates if certain code were to be changed. Updated these comments to use the new include paths. 3) Some header files mentioned their own names in initial comments. Just deleted these self references. Signed-off-by: Tony Luck --- {include/asm-ia64 => arch/ia64/include/asm}/Kbuild | 0 {include/asm-ia64 => arch/ia64/include/asm}/a.out.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/acpi-ext.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/acpi.h | 2 -- {include/asm-ia64 => arch/ia64/include/asm}/agp.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/asmmacro.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/atomic.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/auxvec.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/bitops.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/break.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/bug.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/bugs.h | 0 .../asm-ia64 => arch/ia64/include/asm}/byteorder.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/cache.h | 0 .../asm-ia64 => arch/ia64/include/asm}/cacheflush.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/checksum.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/compat.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/cpu.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/cputime.h | 3 +-- {include/asm-ia64 => arch/ia64/include/asm}/current.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/cyclone.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/delay.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/device.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/div64.h | 0 .../asm-ia64 => arch/ia64/include/asm}/dma-mapping.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/dma.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/dmi.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/elf.h | 0 .../ia64/include/asm}/emergency-restart.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/errno.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/esi.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/fb.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/fcntl.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/fpswa.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/fpu.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/futex.h | 0 .../asm-ia64 => arch/ia64/include/asm}/gcc_intrin.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/hardirq.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/hpsim.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/hugetlb.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/hw_irq.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/ia32.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/ia64regs.h | 0 .../asm-ia64 => arch/ia64/include/asm}/intel_intrin.h | 0 .../asm-ia64 => arch/ia64/include/asm}/intrinsics.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/io.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/ioctl.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/ioctls.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/iosapic.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/ipcbuf.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/irq.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/irq_regs.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/kdebug.h | 2 -- {include/asm-ia64 => arch/ia64/include/asm}/kexec.h | 0 .../asm-ia64 => arch/ia64/include/asm}/kmap_types.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/kprobes.h | 1 - {include/asm-ia64 => arch/ia64/include/asm}/kregs.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/kvm.h | 2 +- {include/asm-ia64 => arch/ia64/include/asm}/kvm_host.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/kvm_para.h | 2 -- .../ia64/include/asm}/libata-portmap.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/linkage.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/local.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/machvec.h | 2 +- .../asm-ia64 => arch/ia64/include/asm}/machvec_dig.h | 0 .../asm-ia64 => arch/ia64/include/asm}/machvec_hpsim.h | 0 .../asm-ia64 => arch/ia64/include/asm}/machvec_hpzx1.h | 0 .../ia64/include/asm}/machvec_hpzx1_swiotlb.h | 0 .../asm-ia64 => arch/ia64/include/asm}/machvec_init.h | 0 .../asm-ia64 => arch/ia64/include/asm}/machvec_sn2.h | 0 .../asm-ia64 => arch/ia64/include/asm}/machvec_uv.h | 0 .../asm-ia64 => arch/ia64/include/asm}/mc146818rtc.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/mca.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/mca_asm.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/meminit.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/mman.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/mmu.h | 0 .../asm-ia64 => arch/ia64/include/asm}/mmu_context.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/mmzone.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/module.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/msgbuf.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/mutex.h | 0 .../asm-ia64 => arch/ia64/include/asm}/native/inst.h | 2 +- .../asm-ia64 => arch/ia64/include/asm}/native/irq.h | 4 +--- {include/asm-ia64 => arch/ia64/include/asm}/nodedata.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/numa.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/page.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/pal.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/param.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/paravirt.h | 2 -- .../ia64/include/asm}/paravirt_privop.h | 2 -- {include/asm-ia64 => arch/ia64/include/asm}/parport.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/patch.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/pci.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/percpu.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/perfmon.h | 0 .../ia64/include/asm}/perfmon_default_smpl.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/pgalloc.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/pgtable.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/poll.h | 0 .../asm-ia64 => arch/ia64/include/asm}/posix_types.h | 0 .../asm-ia64 => arch/ia64/include/asm}/processor.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/ptrace.h | 0 .../ia64/include/asm}/ptrace_offsets.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/resource.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/rse.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/rwsem.h | 2 +- {include/asm-ia64 => arch/ia64/include/asm}/sal.h | 0 .../asm-ia64 => arch/ia64/include/asm}/scatterlist.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sections.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/segment.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sembuf.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/serial.h | 2 -- {include/asm-ia64 => arch/ia64/include/asm}/setup.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/shmbuf.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/shmparam.h | 0 .../asm-ia64 => arch/ia64/include/asm}/sigcontext.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/siginfo.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/signal.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/smp.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/acpi.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/addrs.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/arch.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/bte.h | 0 .../asm-ia64 => arch/ia64/include/asm}/sn/clksupport.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/geo.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/intr.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/io.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/ioc3.h | 0 .../asm-ia64 => arch/ia64/include/asm}/sn/klconfig.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/l1.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/leds.h | 0 .../asm-ia64 => arch/ia64/include/asm}/sn/module.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/mspec.h | 0 .../asm-ia64 => arch/ia64/include/asm}/sn/nodepda.h | 0 .../ia64/include/asm}/sn/pcibr_provider.h | 0 .../ia64/include/asm}/sn/pcibus_provider_defs.h | 0 .../asm-ia64 => arch/ia64/include/asm}/sn/pcidev.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/pda.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/pic.h | 0 .../asm-ia64 => arch/ia64/include/asm}/sn/rw_mmr.h | 0 .../asm-ia64 => arch/ia64/include/asm}/sn/shub_mmr.h | 0 .../asm-ia64 => arch/ia64/include/asm}/sn/shubio.h | 0 .../asm-ia64 => arch/ia64/include/asm}/sn/simulator.h | 0 .../ia64/include/asm}/sn/sn2/sn_hwperf.h | 0 .../asm-ia64 => arch/ia64/include/asm}/sn/sn_cpuid.h | 0 .../ia64/include/asm}/sn/sn_feature_sets.h | 0 .../asm-ia64 => arch/ia64/include/asm}/sn/sn_sal.h | 2 +- {include/asm-ia64 => arch/ia64/include/asm}/sn/tioca.h | 0 .../ia64/include/asm}/sn/tioca_provider.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/tioce.h | 0 .../ia64/include/asm}/sn/tioce_provider.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/tiocp.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/tiocx.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sn/types.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/socket.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/sockios.h | 0 .../asm-ia64 => arch/ia64/include/asm}/sparsemem.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/spinlock.h | 0 .../ia64/include/asm}/spinlock_types.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/stat.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/statfs.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/string.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/suspend.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/system.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/termbits.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/termios.h | 0 .../asm-ia64 => arch/ia64/include/asm}/thread_info.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/timex.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/tlb.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/tlbflush.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/topology.h | 2 -- {include/asm-ia64 => arch/ia64/include/asm}/types.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/uaccess.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/ucontext.h | 0 .../asm-ia64 => arch/ia64/include/asm}/unaligned.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/uncached.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/unistd.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/unwind.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/user.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/ustack.h | 0 .../asm-ia64 => arch/ia64/include/asm}/uv/uv_hub.h | 0 .../asm-ia64 => arch/ia64/include/asm}/uv/uv_mmrs.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/vga.h | 0 {include/asm-ia64 => arch/ia64/include/asm}/xor.h | 2 -- arch/ia64/kernel/asm-offsets.c | 10 +++++----- arch/ia64/kernel/head.S | 2 +- arch/ia64/kernel/iosapic.c | 2 +- arch/ia64/kernel/jprobes.S | 2 +- arch/ia64/kernel/nr-irqs.c | 2 +- arch/ia64/kernel/setup.c | 2 +- arch/ia64/sn/kernel/iomv.c | 2 +- 192 files changed, 18 insertions(+), 38 deletions(-) rename {include/asm-ia64 => arch/ia64/include/asm}/Kbuild (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/a.out.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/acpi-ext.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/acpi.h (99%) rename {include/asm-ia64 => arch/ia64/include/asm}/agp.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/asmmacro.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/atomic.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/auxvec.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/bitops.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/break.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/bug.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/bugs.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/byteorder.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/cache.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/cacheflush.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/checksum.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/compat.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/cpu.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/cputime.h (97%) rename {include/asm-ia64 => arch/ia64/include/asm}/current.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/cyclone.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/delay.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/device.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/div64.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/dma-mapping.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/dma.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/dmi.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/elf.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/emergency-restart.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/errno.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/esi.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/fb.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/fcntl.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/fpswa.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/fpu.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/futex.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/gcc_intrin.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/hardirq.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/hpsim.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/hugetlb.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/hw_irq.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/ia32.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/ia64regs.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/intel_intrin.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/intrinsics.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/io.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/ioctl.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/ioctls.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/iosapic.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/ipcbuf.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/irq.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/irq_regs.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/kdebug.h (98%) rename {include/asm-ia64 => arch/ia64/include/asm}/kexec.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/kmap_types.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/kprobes.h (99%) rename {include/asm-ia64 => arch/ia64/include/asm}/kregs.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/kvm.h (98%) rename {include/asm-ia64 => arch/ia64/include/asm}/kvm_host.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/kvm_para.h (97%) rename {include/asm-ia64 => arch/ia64/include/asm}/libata-portmap.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/linkage.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/local.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/machvec.h (99%) rename {include/asm-ia64 => arch/ia64/include/asm}/machvec_dig.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/machvec_hpsim.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/machvec_hpzx1.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/machvec_hpzx1_swiotlb.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/machvec_init.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/machvec_sn2.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/machvec_uv.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/mc146818rtc.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/mca.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/mca_asm.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/meminit.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/mman.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/mmu.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/mmu_context.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/mmzone.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/module.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/msgbuf.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/mutex.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/native/inst.h (99%) rename {include/asm-ia64 => arch/ia64/include/asm}/native/irq.h (93%) rename {include/asm-ia64 => arch/ia64/include/asm}/nodedata.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/numa.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/page.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/pal.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/param.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/paravirt.h (99%) rename {include/asm-ia64 => arch/ia64/include/asm}/paravirt_privop.h (98%) rename {include/asm-ia64 => arch/ia64/include/asm}/parport.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/patch.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/pci.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/percpu.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/perfmon.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/perfmon_default_smpl.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/pgalloc.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/pgtable.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/poll.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/posix_types.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/processor.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/ptrace.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/ptrace_offsets.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/resource.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/rse.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/rwsem.h (99%) rename {include/asm-ia64 => arch/ia64/include/asm}/sal.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/scatterlist.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sections.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/segment.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sembuf.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/serial.h (93%) rename {include/asm-ia64 => arch/ia64/include/asm}/setup.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/shmbuf.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/shmparam.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sigcontext.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/siginfo.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/signal.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/smp.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/acpi.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/addrs.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/arch.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/bte.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/clksupport.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/geo.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/intr.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/io.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/ioc3.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/klconfig.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/l1.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/leds.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/module.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/mspec.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/nodepda.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/pcibr_provider.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/pcibus_provider_defs.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/pcidev.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/pda.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/pic.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/rw_mmr.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/shub_mmr.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/shubio.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/simulator.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/sn2/sn_hwperf.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/sn_cpuid.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/sn_feature_sets.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/sn_sal.h (99%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/tioca.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/tioca_provider.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/tioce.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/tioce_provider.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/tiocp.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/tiocx.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sn/types.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/socket.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sockios.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/sparsemem.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/spinlock.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/spinlock_types.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/stat.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/statfs.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/string.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/suspend.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/system.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/termbits.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/termios.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/thread_info.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/timex.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/tlb.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/tlbflush.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/topology.h (98%) rename {include/asm-ia64 => arch/ia64/include/asm}/types.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/uaccess.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/ucontext.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/unaligned.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/uncached.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/unistd.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/unwind.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/user.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/ustack.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/uv/uv_hub.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/uv/uv_mmrs.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/vga.h (100%) rename {include/asm-ia64 => arch/ia64/include/asm}/xor.h (97%) diff --git a/include/asm-ia64/Kbuild b/arch/ia64/include/asm/Kbuild similarity index 100% rename from include/asm-ia64/Kbuild rename to arch/ia64/include/asm/Kbuild diff --git a/include/asm-ia64/a.out.h b/arch/ia64/include/asm/a.out.h similarity index 100% rename from include/asm-ia64/a.out.h rename to arch/ia64/include/asm/a.out.h diff --git a/include/asm-ia64/acpi-ext.h b/arch/ia64/include/asm/acpi-ext.h similarity index 100% rename from include/asm-ia64/acpi-ext.h rename to arch/ia64/include/asm/acpi-ext.h diff --git a/include/asm-ia64/acpi.h b/arch/ia64/include/asm/acpi.h similarity index 99% rename from include/asm-ia64/acpi.h rename to arch/ia64/include/asm/acpi.h index fcfad326f4c..0f82cc2934e 100644 --- a/include/asm-ia64/acpi.h +++ b/arch/ia64/include/asm/acpi.h @@ -1,6 +1,4 @@ /* - * asm-ia64/acpi.h - * * Copyright (C) 1999 VA Linux Systems * Copyright (C) 1999 Walt Drummond * Copyright (C) 2000,2001 J.I. Lee diff --git a/include/asm-ia64/agp.h b/arch/ia64/include/asm/agp.h similarity index 100% rename from include/asm-ia64/agp.h rename to arch/ia64/include/asm/agp.h diff --git a/include/asm-ia64/asmmacro.h b/arch/ia64/include/asm/asmmacro.h similarity index 100% rename from include/asm-ia64/asmmacro.h rename to arch/ia64/include/asm/asmmacro.h diff --git a/include/asm-ia64/atomic.h b/arch/ia64/include/asm/atomic.h similarity index 100% rename from include/asm-ia64/atomic.h rename to arch/ia64/include/asm/atomic.h diff --git a/include/asm-ia64/auxvec.h b/arch/ia64/include/asm/auxvec.h similarity index 100% rename from include/asm-ia64/auxvec.h rename to arch/ia64/include/asm/auxvec.h diff --git a/include/asm-ia64/bitops.h b/arch/ia64/include/asm/bitops.h similarity index 100% rename from include/asm-ia64/bitops.h rename to arch/ia64/include/asm/bitops.h diff --git a/include/asm-ia64/break.h b/arch/ia64/include/asm/break.h similarity index 100% rename from include/asm-ia64/break.h rename to arch/ia64/include/asm/break.h diff --git a/include/asm-ia64/bug.h b/arch/ia64/include/asm/bug.h similarity index 100% rename from include/asm-ia64/bug.h rename to arch/ia64/include/asm/bug.h diff --git a/include/asm-ia64/bugs.h b/arch/ia64/include/asm/bugs.h similarity index 100% rename from include/asm-ia64/bugs.h rename to arch/ia64/include/asm/bugs.h diff --git a/include/asm-ia64/byteorder.h b/arch/ia64/include/asm/byteorder.h similarity index 100% rename from include/asm-ia64/byteorder.h rename to arch/ia64/include/asm/byteorder.h diff --git a/include/asm-ia64/cache.h b/arch/ia64/include/asm/cache.h similarity index 100% rename from include/asm-ia64/cache.h rename to arch/ia64/include/asm/cache.h diff --git a/include/asm-ia64/cacheflush.h b/arch/ia64/include/asm/cacheflush.h similarity index 100% rename from include/asm-ia64/cacheflush.h rename to arch/ia64/include/asm/cacheflush.h diff --git a/include/asm-ia64/checksum.h b/arch/ia64/include/asm/checksum.h similarity index 100% rename from include/asm-ia64/checksum.h rename to arch/ia64/include/asm/checksum.h diff --git a/include/asm-ia64/compat.h b/arch/ia64/include/asm/compat.h similarity index 100% rename from include/asm-ia64/compat.h rename to arch/ia64/include/asm/compat.h diff --git a/include/asm-ia64/cpu.h b/arch/ia64/include/asm/cpu.h similarity index 100% rename from include/asm-ia64/cpu.h rename to arch/ia64/include/asm/cpu.h diff --git a/include/asm-ia64/cputime.h b/arch/ia64/include/asm/cputime.h similarity index 97% rename from include/asm-ia64/cputime.h rename to arch/ia64/include/asm/cputime.h index f9abdec6577..d20b998cb91 100644 --- a/include/asm-ia64/cputime.h +++ b/arch/ia64/include/asm/cputime.h @@ -1,6 +1,5 @@ /* - * include/asm-ia64/cputime.h: - * Definitions for measuring cputime on ia64 machines. + * Definitions for measuring cputime on ia64 machines. * * Based on . * diff --git a/include/asm-ia64/current.h b/arch/ia64/include/asm/current.h similarity index 100% rename from include/asm-ia64/current.h rename to arch/ia64/include/asm/current.h diff --git a/include/asm-ia64/cyclone.h b/arch/ia64/include/asm/cyclone.h similarity index 100% rename from include/asm-ia64/cyclone.h rename to arch/ia64/include/asm/cyclone.h diff --git a/include/asm-ia64/delay.h b/arch/ia64/include/asm/delay.h similarity index 100% rename from include/asm-ia64/delay.h rename to arch/ia64/include/asm/delay.h diff --git a/include/asm-ia64/device.h b/arch/ia64/include/asm/device.h similarity index 100% rename from include/asm-ia64/device.h rename to arch/ia64/include/asm/device.h diff --git a/include/asm-ia64/div64.h b/arch/ia64/include/asm/div64.h similarity index 100% rename from include/asm-ia64/div64.h rename to arch/ia64/include/asm/div64.h diff --git a/include/asm-ia64/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h similarity index 100% rename from include/asm-ia64/dma-mapping.h rename to arch/ia64/include/asm/dma-mapping.h diff --git a/include/asm-ia64/dma.h b/arch/ia64/include/asm/dma.h similarity index 100% rename from include/asm-ia64/dma.h rename to arch/ia64/include/asm/dma.h diff --git a/include/asm-ia64/dmi.h b/arch/ia64/include/asm/dmi.h similarity index 100% rename from include/asm-ia64/dmi.h rename to arch/ia64/include/asm/dmi.h diff --git a/include/asm-ia64/elf.h b/arch/ia64/include/asm/elf.h similarity index 100% rename from include/asm-ia64/elf.h rename to arch/ia64/include/asm/elf.h diff --git a/include/asm-ia64/emergency-restart.h b/arch/ia64/include/asm/emergency-restart.h similarity index 100% rename from include/asm-ia64/emergency-restart.h rename to arch/ia64/include/asm/emergency-restart.h diff --git a/include/asm-ia64/errno.h b/arch/ia64/include/asm/errno.h similarity index 100% rename from include/asm-ia64/errno.h rename to arch/ia64/include/asm/errno.h diff --git a/include/asm-ia64/esi.h b/arch/ia64/include/asm/esi.h similarity index 100% rename from include/asm-ia64/esi.h rename to arch/ia64/include/asm/esi.h diff --git a/include/asm-ia64/fb.h b/arch/ia64/include/asm/fb.h similarity index 100% rename from include/asm-ia64/fb.h rename to arch/ia64/include/asm/fb.h diff --git a/include/asm-ia64/fcntl.h b/arch/ia64/include/asm/fcntl.h similarity index 100% rename from include/asm-ia64/fcntl.h rename to arch/ia64/include/asm/fcntl.h diff --git a/include/asm-ia64/fpswa.h b/arch/ia64/include/asm/fpswa.h similarity index 100% rename from include/asm-ia64/fpswa.h rename to arch/ia64/include/asm/fpswa.h diff --git a/include/asm-ia64/fpu.h b/arch/ia64/include/asm/fpu.h similarity index 100% rename from include/asm-ia64/fpu.h rename to arch/ia64/include/asm/fpu.h diff --git a/include/asm-ia64/futex.h b/arch/ia64/include/asm/futex.h similarity index 100% rename from include/asm-ia64/futex.h rename to arch/ia64/include/asm/futex.h diff --git a/include/asm-ia64/gcc_intrin.h b/arch/ia64/include/asm/gcc_intrin.h similarity index 100% rename from include/asm-ia64/gcc_intrin.h rename to arch/ia64/include/asm/gcc_intrin.h diff --git a/include/asm-ia64/hardirq.h b/arch/ia64/include/asm/hardirq.h similarity index 100% rename from include/asm-ia64/hardirq.h rename to arch/ia64/include/asm/hardirq.h diff --git a/include/asm-ia64/hpsim.h b/arch/ia64/include/asm/hpsim.h similarity index 100% rename from include/asm-ia64/hpsim.h rename to arch/ia64/include/asm/hpsim.h diff --git a/include/asm-ia64/hugetlb.h b/arch/ia64/include/asm/hugetlb.h similarity index 100% rename from include/asm-ia64/hugetlb.h rename to arch/ia64/include/asm/hugetlb.h diff --git a/include/asm-ia64/hw_irq.h b/arch/ia64/include/asm/hw_irq.h similarity index 100% rename from include/asm-ia64/hw_irq.h rename to arch/ia64/include/asm/hw_irq.h diff --git a/include/asm-ia64/ia32.h b/arch/ia64/include/asm/ia32.h similarity index 100% rename from include/asm-ia64/ia32.h rename to arch/ia64/include/asm/ia32.h diff --git a/include/asm-ia64/ia64regs.h b/arch/ia64/include/asm/ia64regs.h similarity index 100% rename from include/asm-ia64/ia64regs.h rename to arch/ia64/include/asm/ia64regs.h diff --git a/include/asm-ia64/intel_intrin.h b/arch/ia64/include/asm/intel_intrin.h similarity index 100% rename from include/asm-ia64/intel_intrin.h rename to arch/ia64/include/asm/intel_intrin.h diff --git a/include/asm-ia64/intrinsics.h b/arch/ia64/include/asm/intrinsics.h similarity index 100% rename from include/asm-ia64/intrinsics.h rename to arch/ia64/include/asm/intrinsics.h diff --git a/include/asm-ia64/io.h b/arch/ia64/include/asm/io.h similarity index 100% rename from include/asm-ia64/io.h rename to arch/ia64/include/asm/io.h diff --git a/include/asm-ia64/ioctl.h b/arch/ia64/include/asm/ioctl.h similarity index 100% rename from include/asm-ia64/ioctl.h rename to arch/ia64/include/asm/ioctl.h diff --git a/include/asm-ia64/ioctls.h b/arch/ia64/include/asm/ioctls.h similarity index 100% rename from include/asm-ia64/ioctls.h rename to arch/ia64/include/asm/ioctls.h diff --git a/include/asm-ia64/iosapic.h b/arch/ia64/include/asm/iosapic.h similarity index 100% rename from include/asm-ia64/iosapic.h rename to arch/ia64/include/asm/iosapic.h diff --git a/include/asm-ia64/ipcbuf.h b/arch/ia64/include/asm/ipcbuf.h similarity index 100% rename from include/asm-ia64/ipcbuf.h rename to arch/ia64/include/asm/ipcbuf.h diff --git a/include/asm-ia64/irq.h b/arch/ia64/include/asm/irq.h similarity index 100% rename from include/asm-ia64/irq.h rename to arch/ia64/include/asm/irq.h diff --git a/include/asm-ia64/irq_regs.h b/arch/ia64/include/asm/irq_regs.h similarity index 100% rename from include/asm-ia64/irq_regs.h rename to arch/ia64/include/asm/irq_regs.h diff --git a/include/asm-ia64/kdebug.h b/arch/ia64/include/asm/kdebug.h similarity index 98% rename from include/asm-ia64/kdebug.h rename to arch/ia64/include/asm/kdebug.h index 35e49407d06..d11a6985503 100644 --- a/include/asm-ia64/kdebug.h +++ b/arch/ia64/include/asm/kdebug.h @@ -1,8 +1,6 @@ #ifndef _IA64_KDEBUG_H #define _IA64_KDEBUG_H 1 /* - * include/asm-ia64/kdebug.h - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or diff --git a/include/asm-ia64/kexec.h b/arch/ia64/include/asm/kexec.h similarity index 100% rename from include/asm-ia64/kexec.h rename to arch/ia64/include/asm/kexec.h diff --git a/include/asm-ia64/kmap_types.h b/arch/ia64/include/asm/kmap_types.h similarity index 100% rename from include/asm-ia64/kmap_types.h rename to arch/ia64/include/asm/kmap_types.h diff --git a/include/asm-ia64/kprobes.h b/arch/ia64/include/asm/kprobes.h similarity index 99% rename from include/asm-ia64/kprobes.h rename to arch/ia64/include/asm/kprobes.h index ef71b57fc2f..dbf83fb28db 100644 --- a/include/asm-ia64/kprobes.h +++ b/arch/ia64/include/asm/kprobes.h @@ -2,7 +2,6 @@ #define _ASM_KPROBES_H /* * Kernel Probes (KProbes) - * include/asm-ia64/kprobes.h * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/include/asm-ia64/kregs.h b/arch/ia64/include/asm/kregs.h similarity index 100% rename from include/asm-ia64/kregs.h rename to arch/ia64/include/asm/kregs.h diff --git a/include/asm-ia64/kvm.h b/arch/ia64/include/asm/kvm.h similarity index 98% rename from include/asm-ia64/kvm.h rename to arch/ia64/include/asm/kvm.h index 3f6a090cbd9..f38472ac226 100644 --- a/include/asm-ia64/kvm.h +++ b/arch/ia64/include/asm/kvm.h @@ -2,7 +2,7 @@ #define __ASM_IA64_KVM_H /* - * asm-ia64/kvm.h: kvm structure definitions for ia64 + * kvm structure definitions for ia64 * * Copyright (C) 2007 Xiantao Zhang * diff --git a/include/asm-ia64/kvm_host.h b/arch/ia64/include/asm/kvm_host.h similarity index 100% rename from include/asm-ia64/kvm_host.h rename to arch/ia64/include/asm/kvm_host.h diff --git a/include/asm-ia64/kvm_para.h b/arch/ia64/include/asm/kvm_para.h similarity index 97% rename from include/asm-ia64/kvm_para.h rename to arch/ia64/include/asm/kvm_para.h index 9f9796bb344..0d6d8ca07b8 100644 --- a/include/asm-ia64/kvm_para.h +++ b/arch/ia64/include/asm/kvm_para.h @@ -2,8 +2,6 @@ #define __IA64_KVM_PARA_H /* - * asm-ia64/kvm_para.h - * * Copyright (C) 2007 Xiantao Zhang * * This program is free software; you can redistribute it and/or modify it diff --git a/include/asm-ia64/libata-portmap.h b/arch/ia64/include/asm/libata-portmap.h similarity index 100% rename from include/asm-ia64/libata-portmap.h rename to arch/ia64/include/asm/libata-portmap.h diff --git a/include/asm-ia64/linkage.h b/arch/ia64/include/asm/linkage.h similarity index 100% rename from include/asm-ia64/linkage.h rename to arch/ia64/include/asm/linkage.h diff --git a/include/asm-ia64/local.h b/arch/ia64/include/asm/local.h similarity index 100% rename from include/asm-ia64/local.h rename to arch/ia64/include/asm/local.h diff --git a/include/asm-ia64/machvec.h b/arch/ia64/include/asm/machvec.h similarity index 99% rename from include/asm-ia64/machvec.h rename to arch/ia64/include/asm/machvec.h index a6d50c77b6b..2b850ccafef 100644 --- a/include/asm-ia64/machvec.h +++ b/arch/ia64/include/asm/machvec.h @@ -290,7 +290,7 @@ extern void machvec_init (const char *name); extern void machvec_init_from_cmdline(const char *cmdline); # else -# error Unknown configuration. Update asm-ia64/machvec.h. +# error Unknown configuration. Update arch/ia64/include/asm/machvec.h. # endif /* CONFIG_IA64_GENERIC */ /* diff --git a/include/asm-ia64/machvec_dig.h b/arch/ia64/include/asm/machvec_dig.h similarity index 100% rename from include/asm-ia64/machvec_dig.h rename to arch/ia64/include/asm/machvec_dig.h diff --git a/include/asm-ia64/machvec_hpsim.h b/arch/ia64/include/asm/machvec_hpsim.h similarity index 100% rename from include/asm-ia64/machvec_hpsim.h rename to arch/ia64/include/asm/machvec_hpsim.h diff --git a/include/asm-ia64/machvec_hpzx1.h b/arch/ia64/include/asm/machvec_hpzx1.h similarity index 100% rename from include/asm-ia64/machvec_hpzx1.h rename to arch/ia64/include/asm/machvec_hpzx1.h diff --git a/include/asm-ia64/machvec_hpzx1_swiotlb.h b/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h similarity index 100% rename from include/asm-ia64/machvec_hpzx1_swiotlb.h rename to arch/ia64/include/asm/machvec_hpzx1_swiotlb.h diff --git a/include/asm-ia64/machvec_init.h b/arch/ia64/include/asm/machvec_init.h similarity index 100% rename from include/asm-ia64/machvec_init.h rename to arch/ia64/include/asm/machvec_init.h diff --git a/include/asm-ia64/machvec_sn2.h b/arch/ia64/include/asm/machvec_sn2.h similarity index 100% rename from include/asm-ia64/machvec_sn2.h rename to arch/ia64/include/asm/machvec_sn2.h diff --git a/include/asm-ia64/machvec_uv.h b/arch/ia64/include/asm/machvec_uv.h similarity index 100% rename from include/asm-ia64/machvec_uv.h rename to arch/ia64/include/asm/machvec_uv.h diff --git a/include/asm-ia64/mc146818rtc.h b/arch/ia64/include/asm/mc146818rtc.h similarity index 100% rename from include/asm-ia64/mc146818rtc.h rename to arch/ia64/include/asm/mc146818rtc.h diff --git a/include/asm-ia64/mca.h b/arch/ia64/include/asm/mca.h similarity index 100% rename from include/asm-ia64/mca.h rename to arch/ia64/include/asm/mca.h diff --git a/include/asm-ia64/mca_asm.h b/arch/ia64/include/asm/mca_asm.h similarity index 100% rename from include/asm-ia64/mca_asm.h rename to arch/ia64/include/asm/mca_asm.h diff --git a/include/asm-ia64/meminit.h b/arch/ia64/include/asm/meminit.h similarity index 100% rename from include/asm-ia64/meminit.h rename to arch/ia64/include/asm/meminit.h diff --git a/include/asm-ia64/mman.h b/arch/ia64/include/asm/mman.h similarity index 100% rename from include/asm-ia64/mman.h rename to arch/ia64/include/asm/mman.h diff --git a/include/asm-ia64/mmu.h b/arch/ia64/include/asm/mmu.h similarity index 100% rename from include/asm-ia64/mmu.h rename to arch/ia64/include/asm/mmu.h diff --git a/include/asm-ia64/mmu_context.h b/arch/ia64/include/asm/mmu_context.h similarity index 100% rename from include/asm-ia64/mmu_context.h rename to arch/ia64/include/asm/mmu_context.h diff --git a/include/asm-ia64/mmzone.h b/arch/ia64/include/asm/mmzone.h similarity index 100% rename from include/asm-ia64/mmzone.h rename to arch/ia64/include/asm/mmzone.h diff --git a/include/asm-ia64/module.h b/arch/ia64/include/asm/module.h similarity index 100% rename from include/asm-ia64/module.h rename to arch/ia64/include/asm/module.h diff --git a/include/asm-ia64/msgbuf.h b/arch/ia64/include/asm/msgbuf.h similarity index 100% rename from include/asm-ia64/msgbuf.h rename to arch/ia64/include/asm/msgbuf.h diff --git a/include/asm-ia64/mutex.h b/arch/ia64/include/asm/mutex.h similarity index 100% rename from include/asm-ia64/mutex.h rename to arch/ia64/include/asm/mutex.h diff --git a/include/asm-ia64/native/inst.h b/arch/ia64/include/asm/native/inst.h similarity index 99% rename from include/asm-ia64/native/inst.h rename to arch/ia64/include/asm/native/inst.h index c953a2ca4fc..c8efbf7b849 100644 --- a/include/asm-ia64/native/inst.h +++ b/arch/ia64/include/asm/native/inst.h @@ -1,5 +1,5 @@ /****************************************************************************** - * include/asm-ia64/native/inst.h + * arch/ia64/include/asm/native/inst.h * * Copyright (c) 2008 Isaku Yamahata * VA Linux Systems Japan K.K. diff --git a/include/asm-ia64/native/irq.h b/arch/ia64/include/asm/native/irq.h similarity index 93% rename from include/asm-ia64/native/irq.h rename to arch/ia64/include/asm/native/irq.h index efe9ff74a3c..887a228e2ed 100644 --- a/include/asm-ia64/native/irq.h +++ b/arch/ia64/include/asm/native/irq.h @@ -1,5 +1,5 @@ /****************************************************************************** - * include/asm-ia64/native/irq.h + * arch/ia64/include/asm/native/irq.h * * Copyright (c) 2008 Isaku Yamahata * VA Linux Systems Japan K.K. @@ -17,8 +17,6 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * moved from linux/include/asm-ia64/irq.h. */ #ifndef _ASM_IA64_NATIVE_IRQ_H diff --git a/include/asm-ia64/nodedata.h b/arch/ia64/include/asm/nodedata.h similarity index 100% rename from include/asm-ia64/nodedata.h rename to arch/ia64/include/asm/nodedata.h diff --git a/include/asm-ia64/numa.h b/arch/ia64/include/asm/numa.h similarity index 100% rename from include/asm-ia64/numa.h rename to arch/ia64/include/asm/numa.h diff --git a/include/asm-ia64/page.h b/arch/ia64/include/asm/page.h similarity index 100% rename from include/asm-ia64/page.h rename to arch/ia64/include/asm/page.h diff --git a/include/asm-ia64/pal.h b/arch/ia64/include/asm/pal.h similarity index 100% rename from include/asm-ia64/pal.h rename to arch/ia64/include/asm/pal.h diff --git a/include/asm-ia64/param.h b/arch/ia64/include/asm/param.h similarity index 100% rename from include/asm-ia64/param.h rename to arch/ia64/include/asm/param.h diff --git a/include/asm-ia64/paravirt.h b/arch/ia64/include/asm/paravirt.h similarity index 99% rename from include/asm-ia64/paravirt.h rename to arch/ia64/include/asm/paravirt.h index 1b4df129f57..660cab04483 100644 --- a/include/asm-ia64/paravirt.h +++ b/arch/ia64/include/asm/paravirt.h @@ -1,6 +1,4 @@ /****************************************************************************** - * include/asm-ia64/paravirt.h - * * Copyright (c) 2008 Isaku Yamahata * VA Linux Systems Japan K.K. * diff --git a/include/asm-ia64/paravirt_privop.h b/arch/ia64/include/asm/paravirt_privop.h similarity index 98% rename from include/asm-ia64/paravirt_privop.h rename to arch/ia64/include/asm/paravirt_privop.h index 52482e6940a..d577aac1183 100644 --- a/include/asm-ia64/paravirt_privop.h +++ b/arch/ia64/include/asm/paravirt_privop.h @@ -1,6 +1,4 @@ /****************************************************************************** - * include/asm-ia64/paravirt_privops.h - * * Copyright (c) 2008 Isaku Yamahata * VA Linux Systems Japan K.K. * diff --git a/include/asm-ia64/parport.h b/arch/ia64/include/asm/parport.h similarity index 100% rename from include/asm-ia64/parport.h rename to arch/ia64/include/asm/parport.h diff --git a/include/asm-ia64/patch.h b/arch/ia64/include/asm/patch.h similarity index 100% rename from include/asm-ia64/patch.h rename to arch/ia64/include/asm/patch.h diff --git a/include/asm-ia64/pci.h b/arch/ia64/include/asm/pci.h similarity index 100% rename from include/asm-ia64/pci.h rename to arch/ia64/include/asm/pci.h diff --git a/include/asm-ia64/percpu.h b/arch/ia64/include/asm/percpu.h similarity index 100% rename from include/asm-ia64/percpu.h rename to arch/ia64/include/asm/percpu.h diff --git a/include/asm-ia64/perfmon.h b/arch/ia64/include/asm/perfmon.h similarity index 100% rename from include/asm-ia64/perfmon.h rename to arch/ia64/include/asm/perfmon.h diff --git a/include/asm-ia64/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h similarity index 100% rename from include/asm-ia64/perfmon_default_smpl.h rename to arch/ia64/include/asm/perfmon_default_smpl.h diff --git a/include/asm-ia64/pgalloc.h b/arch/ia64/include/asm/pgalloc.h similarity index 100% rename from include/asm-ia64/pgalloc.h rename to arch/ia64/include/asm/pgalloc.h diff --git a/include/asm-ia64/pgtable.h b/arch/ia64/include/asm/pgtable.h similarity index 100% rename from include/asm-ia64/pgtable.h rename to arch/ia64/include/asm/pgtable.h diff --git a/include/asm-ia64/poll.h b/arch/ia64/include/asm/poll.h similarity index 100% rename from include/asm-ia64/poll.h rename to arch/ia64/include/asm/poll.h diff --git a/include/asm-ia64/posix_types.h b/arch/ia64/include/asm/posix_types.h similarity index 100% rename from include/asm-ia64/posix_types.h rename to arch/ia64/include/asm/posix_types.h diff --git a/include/asm-ia64/processor.h b/arch/ia64/include/asm/processor.h similarity index 100% rename from include/asm-ia64/processor.h rename to arch/ia64/include/asm/processor.h diff --git a/include/asm-ia64/ptrace.h b/arch/ia64/include/asm/ptrace.h similarity index 100% rename from include/asm-ia64/ptrace.h rename to arch/ia64/include/asm/ptrace.h diff --git a/include/asm-ia64/ptrace_offsets.h b/arch/ia64/include/asm/ptrace_offsets.h similarity index 100% rename from include/asm-ia64/ptrace_offsets.h rename to arch/ia64/include/asm/ptrace_offsets.h diff --git a/include/asm-ia64/resource.h b/arch/ia64/include/asm/resource.h similarity index 100% rename from include/asm-ia64/resource.h rename to arch/ia64/include/asm/resource.h diff --git a/include/asm-ia64/rse.h b/arch/ia64/include/asm/rse.h similarity index 100% rename from include/asm-ia64/rse.h rename to arch/ia64/include/asm/rse.h diff --git a/include/asm-ia64/rwsem.h b/arch/ia64/include/asm/rwsem.h similarity index 99% rename from include/asm-ia64/rwsem.h rename to arch/ia64/include/asm/rwsem.h index 8aba06a7b03..fbee74b1578 100644 --- a/include/asm-ia64/rwsem.h +++ b/arch/ia64/include/asm/rwsem.h @@ -1,5 +1,5 @@ /* - * asm-ia64/rwsem.h: R/W semaphores for ia64 + * R/W semaphores for ia64 * * Copyright (C) 2003 Ken Chen * Copyright (C) 2003 Asit Mallick diff --git a/include/asm-ia64/sal.h b/arch/ia64/include/asm/sal.h similarity index 100% rename from include/asm-ia64/sal.h rename to arch/ia64/include/asm/sal.h diff --git a/include/asm-ia64/scatterlist.h b/arch/ia64/include/asm/scatterlist.h similarity index 100% rename from include/asm-ia64/scatterlist.h rename to arch/ia64/include/asm/scatterlist.h diff --git a/include/asm-ia64/sections.h b/arch/ia64/include/asm/sections.h similarity index 100% rename from include/asm-ia64/sections.h rename to arch/ia64/include/asm/sections.h diff --git a/include/asm-ia64/segment.h b/arch/ia64/include/asm/segment.h similarity index 100% rename from include/asm-ia64/segment.h rename to arch/ia64/include/asm/segment.h diff --git a/include/asm-ia64/sembuf.h b/arch/ia64/include/asm/sembuf.h similarity index 100% rename from include/asm-ia64/sembuf.h rename to arch/ia64/include/asm/sembuf.h diff --git a/include/asm-ia64/serial.h b/arch/ia64/include/asm/serial.h similarity index 93% rename from include/asm-ia64/serial.h rename to arch/ia64/include/asm/serial.h index 0c7a2f3dcf1..068be11583d 100644 --- a/include/asm-ia64/serial.h +++ b/arch/ia64/include/asm/serial.h @@ -1,6 +1,4 @@ /* - * include/asm-ia64/serial.h - * * Derived from the i386 version. */ diff --git a/include/asm-ia64/setup.h b/arch/ia64/include/asm/setup.h similarity index 100% rename from include/asm-ia64/setup.h rename to arch/ia64/include/asm/setup.h diff --git a/include/asm-ia64/shmbuf.h b/arch/ia64/include/asm/shmbuf.h similarity index 100% rename from include/asm-ia64/shmbuf.h rename to arch/ia64/include/asm/shmbuf.h diff --git a/include/asm-ia64/shmparam.h b/arch/ia64/include/asm/shmparam.h similarity index 100% rename from include/asm-ia64/shmparam.h rename to arch/ia64/include/asm/shmparam.h diff --git a/include/asm-ia64/sigcontext.h b/arch/ia64/include/asm/sigcontext.h similarity index 100% rename from include/asm-ia64/sigcontext.h rename to arch/ia64/include/asm/sigcontext.h diff --git a/include/asm-ia64/siginfo.h b/arch/ia64/include/asm/siginfo.h similarity index 100% rename from include/asm-ia64/siginfo.h rename to arch/ia64/include/asm/siginfo.h diff --git a/include/asm-ia64/signal.h b/arch/ia64/include/asm/signal.h similarity index 100% rename from include/asm-ia64/signal.h rename to arch/ia64/include/asm/signal.h diff --git a/include/asm-ia64/smp.h b/arch/ia64/include/asm/smp.h similarity index 100% rename from include/asm-ia64/smp.h rename to arch/ia64/include/asm/smp.h diff --git a/include/asm-ia64/sn/acpi.h b/arch/ia64/include/asm/sn/acpi.h similarity index 100% rename from include/asm-ia64/sn/acpi.h rename to arch/ia64/include/asm/sn/acpi.h diff --git a/include/asm-ia64/sn/addrs.h b/arch/ia64/include/asm/sn/addrs.h similarity index 100% rename from include/asm-ia64/sn/addrs.h rename to arch/ia64/include/asm/sn/addrs.h diff --git a/include/asm-ia64/sn/arch.h b/arch/ia64/include/asm/sn/arch.h similarity index 100% rename from include/asm-ia64/sn/arch.h rename to arch/ia64/include/asm/sn/arch.h diff --git a/include/asm-ia64/sn/bte.h b/arch/ia64/include/asm/sn/bte.h similarity index 100% rename from include/asm-ia64/sn/bte.h rename to arch/ia64/include/asm/sn/bte.h diff --git a/include/asm-ia64/sn/clksupport.h b/arch/ia64/include/asm/sn/clksupport.h similarity index 100% rename from include/asm-ia64/sn/clksupport.h rename to arch/ia64/include/asm/sn/clksupport.h diff --git a/include/asm-ia64/sn/geo.h b/arch/ia64/include/asm/sn/geo.h similarity index 100% rename from include/asm-ia64/sn/geo.h rename to arch/ia64/include/asm/sn/geo.h diff --git a/include/asm-ia64/sn/intr.h b/arch/ia64/include/asm/sn/intr.h similarity index 100% rename from include/asm-ia64/sn/intr.h rename to arch/ia64/include/asm/sn/intr.h diff --git a/include/asm-ia64/sn/io.h b/arch/ia64/include/asm/sn/io.h similarity index 100% rename from include/asm-ia64/sn/io.h rename to arch/ia64/include/asm/sn/io.h diff --git a/include/asm-ia64/sn/ioc3.h b/arch/ia64/include/asm/sn/ioc3.h similarity index 100% rename from include/asm-ia64/sn/ioc3.h rename to arch/ia64/include/asm/sn/ioc3.h diff --git a/include/asm-ia64/sn/klconfig.h b/arch/ia64/include/asm/sn/klconfig.h similarity index 100% rename from include/asm-ia64/sn/klconfig.h rename to arch/ia64/include/asm/sn/klconfig.h diff --git a/include/asm-ia64/sn/l1.h b/arch/ia64/include/asm/sn/l1.h similarity index 100% rename from include/asm-ia64/sn/l1.h rename to arch/ia64/include/asm/sn/l1.h diff --git a/include/asm-ia64/sn/leds.h b/arch/ia64/include/asm/sn/leds.h similarity index 100% rename from include/asm-ia64/sn/leds.h rename to arch/ia64/include/asm/sn/leds.h diff --git a/include/asm-ia64/sn/module.h b/arch/ia64/include/asm/sn/module.h similarity index 100% rename from include/asm-ia64/sn/module.h rename to arch/ia64/include/asm/sn/module.h diff --git a/include/asm-ia64/sn/mspec.h b/arch/ia64/include/asm/sn/mspec.h similarity index 100% rename from include/asm-ia64/sn/mspec.h rename to arch/ia64/include/asm/sn/mspec.h diff --git a/include/asm-ia64/sn/nodepda.h b/arch/ia64/include/asm/sn/nodepda.h similarity index 100% rename from include/asm-ia64/sn/nodepda.h rename to arch/ia64/include/asm/sn/nodepda.h diff --git a/include/asm-ia64/sn/pcibr_provider.h b/arch/ia64/include/asm/sn/pcibr_provider.h similarity index 100% rename from include/asm-ia64/sn/pcibr_provider.h rename to arch/ia64/include/asm/sn/pcibr_provider.h diff --git a/include/asm-ia64/sn/pcibus_provider_defs.h b/arch/ia64/include/asm/sn/pcibus_provider_defs.h similarity index 100% rename from include/asm-ia64/sn/pcibus_provider_defs.h rename to arch/ia64/include/asm/sn/pcibus_provider_defs.h diff --git a/include/asm-ia64/sn/pcidev.h b/arch/ia64/include/asm/sn/pcidev.h similarity index 100% rename from include/asm-ia64/sn/pcidev.h rename to arch/ia64/include/asm/sn/pcidev.h diff --git a/include/asm-ia64/sn/pda.h b/arch/ia64/include/asm/sn/pda.h similarity index 100% rename from include/asm-ia64/sn/pda.h rename to arch/ia64/include/asm/sn/pda.h diff --git a/include/asm-ia64/sn/pic.h b/arch/ia64/include/asm/sn/pic.h similarity index 100% rename from include/asm-ia64/sn/pic.h rename to arch/ia64/include/asm/sn/pic.h diff --git a/include/asm-ia64/sn/rw_mmr.h b/arch/ia64/include/asm/sn/rw_mmr.h similarity index 100% rename from include/asm-ia64/sn/rw_mmr.h rename to arch/ia64/include/asm/sn/rw_mmr.h diff --git a/include/asm-ia64/sn/shub_mmr.h b/arch/ia64/include/asm/sn/shub_mmr.h similarity index 100% rename from include/asm-ia64/sn/shub_mmr.h rename to arch/ia64/include/asm/sn/shub_mmr.h diff --git a/include/asm-ia64/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h similarity index 100% rename from include/asm-ia64/sn/shubio.h rename to arch/ia64/include/asm/sn/shubio.h diff --git a/include/asm-ia64/sn/simulator.h b/arch/ia64/include/asm/sn/simulator.h similarity index 100% rename from include/asm-ia64/sn/simulator.h rename to arch/ia64/include/asm/sn/simulator.h diff --git a/include/asm-ia64/sn/sn2/sn_hwperf.h b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h similarity index 100% rename from include/asm-ia64/sn/sn2/sn_hwperf.h rename to arch/ia64/include/asm/sn/sn2/sn_hwperf.h diff --git a/include/asm-ia64/sn/sn_cpuid.h b/arch/ia64/include/asm/sn/sn_cpuid.h similarity index 100% rename from include/asm-ia64/sn/sn_cpuid.h rename to arch/ia64/include/asm/sn/sn_cpuid.h diff --git a/include/asm-ia64/sn/sn_feature_sets.h b/arch/ia64/include/asm/sn/sn_feature_sets.h similarity index 100% rename from include/asm-ia64/sn/sn_feature_sets.h rename to arch/ia64/include/asm/sn/sn_feature_sets.h diff --git a/include/asm-ia64/sn/sn_sal.h b/arch/ia64/include/asm/sn/sn_sal.h similarity index 99% rename from include/asm-ia64/sn/sn_sal.h rename to arch/ia64/include/asm/sn/sn_sal.h index 676b31a08c6..57e649d388b 100644 --- a/include/asm-ia64/sn/sn_sal.h +++ b/arch/ia64/include/asm/sn/sn_sal.h @@ -1094,7 +1094,7 @@ ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift, /* * This is the access point to the Altix PROM hardware performance * and status monitoring interface. For info on using this, see - * include/asm-ia64/sn/sn2/sn_hwperf.h + * arch/ia64/include/asm/sn/sn2/sn_hwperf.h */ static inline int ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2, diff --git a/include/asm-ia64/sn/tioca.h b/arch/ia64/include/asm/sn/tioca.h similarity index 100% rename from include/asm-ia64/sn/tioca.h rename to arch/ia64/include/asm/sn/tioca.h diff --git a/include/asm-ia64/sn/tioca_provider.h b/arch/ia64/include/asm/sn/tioca_provider.h similarity index 100% rename from include/asm-ia64/sn/tioca_provider.h rename to arch/ia64/include/asm/sn/tioca_provider.h diff --git a/include/asm-ia64/sn/tioce.h b/arch/ia64/include/asm/sn/tioce.h similarity index 100% rename from include/asm-ia64/sn/tioce.h rename to arch/ia64/include/asm/sn/tioce.h diff --git a/include/asm-ia64/sn/tioce_provider.h b/arch/ia64/include/asm/sn/tioce_provider.h similarity index 100% rename from include/asm-ia64/sn/tioce_provider.h rename to arch/ia64/include/asm/sn/tioce_provider.h diff --git a/include/asm-ia64/sn/tiocp.h b/arch/ia64/include/asm/sn/tiocp.h similarity index 100% rename from include/asm-ia64/sn/tiocp.h rename to arch/ia64/include/asm/sn/tiocp.h diff --git a/include/asm-ia64/sn/tiocx.h b/arch/ia64/include/asm/sn/tiocx.h similarity index 100% rename from include/asm-ia64/sn/tiocx.h rename to arch/ia64/include/asm/sn/tiocx.h diff --git a/include/asm-ia64/sn/types.h b/arch/ia64/include/asm/sn/types.h similarity index 100% rename from include/asm-ia64/sn/types.h rename to arch/ia64/include/asm/sn/types.h diff --git a/include/asm-ia64/socket.h b/arch/ia64/include/asm/socket.h similarity index 100% rename from include/asm-ia64/socket.h rename to arch/ia64/include/asm/socket.h diff --git a/include/asm-ia64/sockios.h b/arch/ia64/include/asm/sockios.h similarity index 100% rename from include/asm-ia64/sockios.h rename to arch/ia64/include/asm/sockios.h diff --git a/include/asm-ia64/sparsemem.h b/arch/ia64/include/asm/sparsemem.h similarity index 100% rename from include/asm-ia64/sparsemem.h rename to arch/ia64/include/asm/sparsemem.h diff --git a/include/asm-ia64/spinlock.h b/arch/ia64/include/asm/spinlock.h similarity index 100% rename from include/asm-ia64/spinlock.h rename to arch/ia64/include/asm/spinlock.h diff --git a/include/asm-ia64/spinlock_types.h b/arch/ia64/include/asm/spinlock_types.h similarity index 100% rename from include/asm-ia64/spinlock_types.h rename to arch/ia64/include/asm/spinlock_types.h diff --git a/include/asm-ia64/stat.h b/arch/ia64/include/asm/stat.h similarity index 100% rename from include/asm-ia64/stat.h rename to arch/ia64/include/asm/stat.h diff --git a/include/asm-ia64/statfs.h b/arch/ia64/include/asm/statfs.h similarity index 100% rename from include/asm-ia64/statfs.h rename to arch/ia64/include/asm/statfs.h diff --git a/include/asm-ia64/string.h b/arch/ia64/include/asm/string.h similarity index 100% rename from include/asm-ia64/string.h rename to arch/ia64/include/asm/string.h diff --git a/include/asm-ia64/suspend.h b/arch/ia64/include/asm/suspend.h similarity index 100% rename from include/asm-ia64/suspend.h rename to arch/ia64/include/asm/suspend.h diff --git a/include/asm-ia64/system.h b/arch/ia64/include/asm/system.h similarity index 100% rename from include/asm-ia64/system.h rename to arch/ia64/include/asm/system.h diff --git a/include/asm-ia64/termbits.h b/arch/ia64/include/asm/termbits.h similarity index 100% rename from include/asm-ia64/termbits.h rename to arch/ia64/include/asm/termbits.h diff --git a/include/asm-ia64/termios.h b/arch/ia64/include/asm/termios.h similarity index 100% rename from include/asm-ia64/termios.h rename to arch/ia64/include/asm/termios.h diff --git a/include/asm-ia64/thread_info.h b/arch/ia64/include/asm/thread_info.h similarity index 100% rename from include/asm-ia64/thread_info.h rename to arch/ia64/include/asm/thread_info.h diff --git a/include/asm-ia64/timex.h b/arch/ia64/include/asm/timex.h similarity index 100% rename from include/asm-ia64/timex.h rename to arch/ia64/include/asm/timex.h diff --git a/include/asm-ia64/tlb.h b/arch/ia64/include/asm/tlb.h similarity index 100% rename from include/asm-ia64/tlb.h rename to arch/ia64/include/asm/tlb.h diff --git a/include/asm-ia64/tlbflush.h b/arch/ia64/include/asm/tlbflush.h similarity index 100% rename from include/asm-ia64/tlbflush.h rename to arch/ia64/include/asm/tlbflush.h diff --git a/include/asm-ia64/topology.h b/arch/ia64/include/asm/topology.h similarity index 98% rename from include/asm-ia64/topology.h rename to arch/ia64/include/asm/topology.h index 32863b3bb1d..35bcb641c9e 100644 --- a/include/asm-ia64/topology.h +++ b/arch/ia64/include/asm/topology.h @@ -1,6 +1,4 @@ /* - * linux/include/asm-ia64/topology.h - * * Copyright (C) 2002, Erich Focht, NEC * * All rights reserved. diff --git a/include/asm-ia64/types.h b/arch/ia64/include/asm/types.h similarity index 100% rename from include/asm-ia64/types.h rename to arch/ia64/include/asm/types.h diff --git a/include/asm-ia64/uaccess.h b/arch/ia64/include/asm/uaccess.h similarity index 100% rename from include/asm-ia64/uaccess.h rename to arch/ia64/include/asm/uaccess.h diff --git a/include/asm-ia64/ucontext.h b/arch/ia64/include/asm/ucontext.h similarity index 100% rename from include/asm-ia64/ucontext.h rename to arch/ia64/include/asm/ucontext.h diff --git a/include/asm-ia64/unaligned.h b/arch/ia64/include/asm/unaligned.h similarity index 100% rename from include/asm-ia64/unaligned.h rename to arch/ia64/include/asm/unaligned.h diff --git a/include/asm-ia64/uncached.h b/arch/ia64/include/asm/uncached.h similarity index 100% rename from include/asm-ia64/uncached.h rename to arch/ia64/include/asm/uncached.h diff --git a/include/asm-ia64/unistd.h b/arch/ia64/include/asm/unistd.h similarity index 100% rename from include/asm-ia64/unistd.h rename to arch/ia64/include/asm/unistd.h diff --git a/include/asm-ia64/unwind.h b/arch/ia64/include/asm/unwind.h similarity index 100% rename from include/asm-ia64/unwind.h rename to arch/ia64/include/asm/unwind.h diff --git a/include/asm-ia64/user.h b/arch/ia64/include/asm/user.h similarity index 100% rename from include/asm-ia64/user.h rename to arch/ia64/include/asm/user.h diff --git a/include/asm-ia64/ustack.h b/arch/ia64/include/asm/ustack.h similarity index 100% rename from include/asm-ia64/ustack.h rename to arch/ia64/include/asm/ustack.h diff --git a/include/asm-ia64/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h similarity index 100% rename from include/asm-ia64/uv/uv_hub.h rename to arch/ia64/include/asm/uv/uv_hub.h diff --git a/include/asm-ia64/uv/uv_mmrs.h b/arch/ia64/include/asm/uv/uv_mmrs.h similarity index 100% rename from include/asm-ia64/uv/uv_mmrs.h rename to arch/ia64/include/asm/uv/uv_mmrs.h diff --git a/include/asm-ia64/vga.h b/arch/ia64/include/asm/vga.h similarity index 100% rename from include/asm-ia64/vga.h rename to arch/ia64/include/asm/vga.h diff --git a/include/asm-ia64/xor.h b/arch/ia64/include/asm/xor.h similarity index 97% rename from include/asm-ia64/xor.h rename to arch/ia64/include/asm/xor.h index 41fb8744d17..a349e23dea1 100644 --- a/include/asm-ia64/xor.h +++ b/arch/ia64/include/asm/xor.h @@ -1,6 +1,4 @@ /* - * include/asm-ia64/xor.h - * * Optimized RAID-5 checksumming functions for IA-64. * * This program is free software; you can redistribute it and/or modify diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c index c64a55af9b9..94c44b1ccfd 100644 --- a/arch/ia64/kernel/asm-offsets.c +++ b/arch/ia64/kernel/asm-offsets.c @@ -10,11 +10,11 @@ #include #include #include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include #include "../kernel/sigframe.h" #include "../kernel/fsyscall_gtod_data.h" diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index db540e58c78..41c712917ff 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -1123,7 +1123,7 @@ SET_REG(b5); * p15 - used to track flag status. * * If you patch this code to use more registers, do not forget to update - * the clobber lists for spin_lock() in include/asm-ia64/spinlock.h. + * the clobber lists for spin_lock() in arch/ia64/include/asm/spinlock.h. */ #if (__GNUC__ == 3 && __GNUC_MINOR__ < 3) diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 3bc2fa64f87..5c4674ae8ae 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -69,7 +69,7 @@ * systems, we use one-to-one mapping between IA-64 vector and IRQ. A * platform can implement platform_irq_to_vector(irq) and * platform_local_vector_to_irq(vector) APIs to differentiate the mapping. - * Please see also include/asm-ia64/hw_irq.h for those APIs. + * Please see also arch/ia64/include/asm/hw_irq.h for those APIs. * * To sum up, there are three levels of mappings involved: * diff --git a/arch/ia64/kernel/jprobes.S b/arch/ia64/kernel/jprobes.S index 621630256c4..f69389c7be1 100644 --- a/arch/ia64/kernel/jprobes.S +++ b/arch/ia64/kernel/jprobes.S @@ -45,7 +45,7 @@ * to the correct location. */ #include -#include +#include /* * void jprobe_break(void) diff --git a/arch/ia64/kernel/nr-irqs.c b/arch/ia64/kernel/nr-irqs.c index 1ae049181e8..8273afc32db 100644 --- a/arch/ia64/kernel/nr-irqs.c +++ b/arch/ia64/kernel/nr-irqs.c @@ -9,7 +9,7 @@ #include #include -#include +#include void foo(void) { diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index e5c2de9b29a..593279f33e9 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -314,7 +314,7 @@ static inline void __init setup_crashkernel(unsigned long total, int *n) * * Setup the reserved memory areas set aside for the boot parameters, * initrd, etc. There are currently %IA64_MAX_RSVD_REGIONS defined, - * see include/asm-ia64/meminit.h if you need to define more. + * see arch/ia64/include/asm/meminit.h if you need to define more. */ void __init reserve_memory (void) diff --git a/arch/ia64/sn/kernel/iomv.c b/arch/ia64/sn/kernel/iomv.c index ab7e2fd4079..c77ebdf9811 100644 --- a/arch/ia64/sn/kernel/iomv.c +++ b/arch/ia64/sn/kernel/iomv.c @@ -63,7 +63,7 @@ EXPORT_SYMBOL(sn_io_addr); /** * __sn_mmiowb - I/O space memory barrier * - * See include/asm-ia64/io.h and Documentation/DocBook/deviceiobook.tmpl + * See arch/ia64/include/asm/io.h and Documentation/DocBook/deviceiobook.tmpl * for details. * * On SN2, we wait for the PIO_WRITE_STATUS SHub register to clear. -- GitLab From 66b8bd3c405389213de1d6ba6c2565990f62004f Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 1 Aug 2008 17:54:32 +0000 Subject: [PATCH 0577/1024] [CIFS] properly account for new user= field in SPNEGO upcall string allocation ...it doesn't look like it's being accounted for at the moment. Also try to reorganize the calculation to make it a little more evident what each piece means. This should probably go to the stable series as well... Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_spnego.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c index 7013aaff6ae..2434ab0e879 100644 --- a/fs/cifs/cifs_spnego.c +++ b/fs/cifs/cifs_spnego.c @@ -66,8 +66,8 @@ struct key_type cifs_spnego_key_type = { .describe = user_describe, }; -#define MAX_VER_STR_LEN 9 /* length of longest version string e.g. - strlen(";ver=0xFF") */ +#define MAX_VER_STR_LEN 8 /* length of longest version string e.g. + strlen("ver=0xFF") */ #define MAX_MECH_STR_LEN 13 /* length of longest security mechanism name, eg in future could have strlen(";sec=ntlmsspi") */ #define MAX_IPV6_ADDR_LEN 42 /* eg FEDC:BA98:7654:3210:FEDC:BA98:7654:3210/60 */ @@ -81,11 +81,15 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo) struct key *spnego_key; const char *hostname = server->hostname; - /* BB: come up with better scheme for determining length */ - /* length of fields (with semicolons): ver=0xyz ipv4= ipaddress host= - hostname sec=mechanism uid=0x uid */ - desc_len = MAX_VER_STR_LEN + 5 + MAX_IPV6_ADDR_LEN + 1 + 6 + - strlen(hostname) + MAX_MECH_STR_LEN + 8 + (sizeof(uid_t) * 2); + /* length of fields (with semicolons): ver=0xyz ip4=ipaddress + host=hostname sec=mechanism uid=0xFF user=username */ + desc_len = MAX_VER_STR_LEN + + 6 /* len of "host=" */ + strlen(hostname) + + 5 /* len of ";ipv4=" */ + MAX_IPV6_ADDR_LEN + + MAX_MECH_STR_LEN + + 7 /* len of ";uid=0x" */ + (sizeof(uid_t) * 2) + + 6 /* len of ";user=" */ + strlen(sesInfo->userName) + 1; + spnego_key = ERR_PTR(-ENOMEM); description = kzalloc(desc_len, GFP_KERNEL); if (description == NULL) -- GitLab From 6c5e0c4d518a37e1d5d794c14433e80284415079 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 1 Aug 2008 20:31:32 +0200 Subject: [PATCH 0578/1024] block: add a blk_plug_device_unlocked() that grabs the queue lock blk_plug_device() must be called with the queue lock held, so callers often just grab and release the lock for that purpose. Add a helper that does just that. Signed-off-by: Jens Axboe --- block/blk-core.c | 18 ++++++++++++++++++ include/linux/blkdev.h | 1 + 2 files changed, 19 insertions(+) diff --git a/block/blk-core.c b/block/blk-core.c index fef79ccb2a1..4889eb86a39 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -212,6 +212,24 @@ void blk_plug_device(struct request_queue *q) } EXPORT_SYMBOL(blk_plug_device); +/** + * blk_plug_device_unlocked - plug a device without queue lock held + * @q: The &struct request_queue to plug + * + * Description: + * Like @blk_plug_device(), but grabs the queue lock and disables + * interrupts. + **/ +void blk_plug_device_unlocked(struct request_queue *q) +{ + unsigned long flags; + + spin_lock_irqsave(q->queue_lock, flags); + blk_plug_device(q); + spin_unlock_irqrestore(q->queue_lock, flags); +} +EXPORT_SYMBOL(blk_plug_device_unlocked); + /* * remove the queue from the plugged list, if present. called with * queue lock held and interrupts disabled. diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 88d68081a0f..e61f22be4d0 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -655,6 +655,7 @@ extern struct request *blk_get_request(struct request_queue *, int, gfp_t); extern void blk_insert_request(struct request_queue *, struct request *, int, void *); extern void blk_requeue_request(struct request_queue *, struct request *); extern void blk_plug_device(struct request_queue *); +extern void blk_plug_device_unlocked(struct request_queue *); extern int blk_remove_plug(struct request_queue *); extern void blk_recount_segments(struct request_queue *, struct bio *); extern int scsi_cmd_ioctl(struct file *, struct request_queue *, -- GitLab From 93769f58078e2a066b56217cae1e343ac5a6b78c Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 1 Aug 2008 20:32:31 +0200 Subject: [PATCH 0579/1024] md: the bitmap code needs to use blk_plug_device_unlocked() It doesn't hold the queue lock, so it's both racey on the queue flags and thus spews a warning. Signed-off-by: Jens Axboe --- drivers/md/bitmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 621a272a2c7..7e65bad522c 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1234,7 +1234,7 @@ int bitmap_startwrite(struct bitmap *bitmap, sector_t offset, unsigned long sect case 0: bitmap_file_set_bit(bitmap, offset); bitmap_count_page(bitmap,offset, 1); - blk_plug_device(bitmap->mddev->queue); + blk_plug_device_unlocked(bitmap->mddev->queue); /* fall through */ case 1: *bmc = 2; -- GitLab From c6557e7f2b6ae76a44653d38f835174074c42e05 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 1 Aug 2008 20:42:05 +0200 Subject: [PATCH 0580/1024] [S390] move include/asm-s390 to arch/s390/include/asm Signed-off-by: Martin Schwidefsky --- {include/asm-s390 => arch/s390/include/asm}/Kbuild | 0 {include/asm-s390 => arch/s390/include/asm}/airq.h | 0 {include/asm-s390 => arch/s390/include/asm}/appldata.h | 0 {include/asm-s390 => arch/s390/include/asm}/atomic.h | 0 {include/asm-s390 => arch/s390/include/asm}/auxvec.h | 0 {include/asm-s390 => arch/s390/include/asm}/bitops.h | 0 {include/asm-s390 => arch/s390/include/asm}/bug.h | 0 {include/asm-s390 => arch/s390/include/asm}/bugs.h | 0 {include/asm-s390 => arch/s390/include/asm}/byteorder.h | 0 {include/asm-s390 => arch/s390/include/asm}/cache.h | 0 {include/asm-s390 => arch/s390/include/asm}/cacheflush.h | 0 {include/asm-s390 => arch/s390/include/asm}/ccwdev.h | 0 {include/asm-s390 => arch/s390/include/asm}/ccwgroup.h | 0 {include/asm-s390 => arch/s390/include/asm}/checksum.h | 0 {include/asm-s390 => arch/s390/include/asm}/chpid.h | 0 {include/asm-s390 => arch/s390/include/asm}/chsc.h | 0 {include/asm-s390 => arch/s390/include/asm}/cio.h | 0 {include/asm-s390 => arch/s390/include/asm}/cmb.h | 0 {include/asm-s390 => arch/s390/include/asm}/compat.h | 0 {include/asm-s390 => arch/s390/include/asm}/cpcmd.h | 0 {include/asm-s390 => arch/s390/include/asm}/cpu.h | 0 {include/asm-s390 => arch/s390/include/asm}/cputime.h | 0 {include/asm-s390 => arch/s390/include/asm}/current.h | 0 {include/asm-s390 => arch/s390/include/asm}/dasd.h | 0 {include/asm-s390 => arch/s390/include/asm}/debug.h | 0 {include/asm-s390 => arch/s390/include/asm}/delay.h | 0 {include/asm-s390 => arch/s390/include/asm}/device.h | 0 {include/asm-s390 => arch/s390/include/asm}/diag.h | 0 {include/asm-s390 => arch/s390/include/asm}/div64.h | 0 {include/asm-s390 => arch/s390/include/asm}/dma.h | 0 {include/asm-s390 => arch/s390/include/asm}/ebcdic.h | 0 {include/asm-s390 => arch/s390/include/asm}/elf.h | 0 {include/asm-s390 => arch/s390/include/asm}/emergency-restart.h | 0 {include/asm-s390 => arch/s390/include/asm}/errno.h | 0 {include/asm-s390 => arch/s390/include/asm}/etr.h | 0 {include/asm-s390 => arch/s390/include/asm}/extmem.h | 0 {include/asm-s390 => arch/s390/include/asm}/fb.h | 0 {include/asm-s390 => arch/s390/include/asm}/fcntl.h | 0 {include/asm-s390 => arch/s390/include/asm}/fcx.h | 0 {include/asm-s390 => arch/s390/include/asm}/futex.h | 0 {include/asm-s390 => arch/s390/include/asm}/hardirq.h | 0 {include/asm-s390 => arch/s390/include/asm}/hugetlb.h | 0 {include/asm-s390 => arch/s390/include/asm}/idals.h | 0 {include/asm-s390 => arch/s390/include/asm}/io.h | 0 {include/asm-s390 => arch/s390/include/asm}/ioctl.h | 0 {include/asm-s390 => arch/s390/include/asm}/ioctls.h | 0 {include/asm-s390 => arch/s390/include/asm}/ipcbuf.h | 0 {include/asm-s390 => arch/s390/include/asm}/ipl.h | 0 {include/asm-s390 => arch/s390/include/asm}/irq.h | 0 {include/asm-s390 => arch/s390/include/asm}/irq_regs.h | 0 {include/asm-s390 => arch/s390/include/asm}/irqflags.h | 0 {include/asm-s390 => arch/s390/include/asm}/isc.h | 0 {include/asm-s390 => arch/s390/include/asm}/itcw.h | 0 {include/asm-s390 => arch/s390/include/asm}/kdebug.h | 0 {include/asm-s390 => arch/s390/include/asm}/kexec.h | 0 {include/asm-s390 => arch/s390/include/asm}/kmap_types.h | 0 {include/asm-s390 => arch/s390/include/asm}/kprobes.h | 0 {include/asm-s390 => arch/s390/include/asm}/kvm.h | 0 {include/asm-s390 => arch/s390/include/asm}/kvm_host.h | 0 {include/asm-s390 => arch/s390/include/asm}/kvm_para.h | 0 {include/asm-s390 => arch/s390/include/asm}/kvm_virtio.h | 0 {include/asm-s390 => arch/s390/include/asm}/linkage.h | 0 {include/asm-s390 => arch/s390/include/asm}/local.h | 0 {include/asm-s390 => arch/s390/include/asm}/lowcore.h | 0 {include/asm-s390 => arch/s390/include/asm}/mathemu.h | 0 {include/asm-s390 => arch/s390/include/asm}/mman.h | 0 {include/asm-s390 => arch/s390/include/asm}/mmu.h | 0 {include/asm-s390 => arch/s390/include/asm}/mmu_context.h | 0 {include/asm-s390 => arch/s390/include/asm}/module.h | 0 {include/asm-s390 => arch/s390/include/asm}/monwriter.h | 0 {include/asm-s390 => arch/s390/include/asm}/msgbuf.h | 0 {include/asm-s390 => arch/s390/include/asm}/mutex.h | 0 {include/asm-s390 => arch/s390/include/asm}/page.h | 0 {include/asm-s390 => arch/s390/include/asm}/param.h | 0 {include/asm-s390 => arch/s390/include/asm}/pci.h | 0 {include/asm-s390 => arch/s390/include/asm}/percpu.h | 0 {include/asm-s390 => arch/s390/include/asm}/pgalloc.h | 0 {include/asm-s390 => arch/s390/include/asm}/pgtable.h | 0 {include/asm-s390 => arch/s390/include/asm}/poll.h | 0 {include/asm-s390 => arch/s390/include/asm}/posix_types.h | 0 {include/asm-s390 => arch/s390/include/asm}/processor.h | 0 {include/asm-s390 => arch/s390/include/asm}/ptrace.h | 0 {include/asm-s390 => arch/s390/include/asm}/qdio.h | 0 {include/asm-s390 => arch/s390/include/asm}/qeth.h | 0 {include/asm-s390 => arch/s390/include/asm}/reset.h | 0 {include/asm-s390 => arch/s390/include/asm}/resource.h | 0 {include/asm-s390 => arch/s390/include/asm}/rwsem.h | 0 {include/asm-s390 => arch/s390/include/asm}/s390_ext.h | 0 {include/asm-s390 => arch/s390/include/asm}/s390_rdev.h | 0 {include/asm-s390 => arch/s390/include/asm}/scatterlist.h | 0 {include/asm-s390 => arch/s390/include/asm}/schid.h | 0 {include/asm-s390 => arch/s390/include/asm}/sclp.h | 0 {include/asm-s390 => arch/s390/include/asm}/sections.h | 0 {include/asm-s390 => arch/s390/include/asm}/segment.h | 0 {include/asm-s390 => arch/s390/include/asm}/sembuf.h | 0 {include/asm-s390 => arch/s390/include/asm}/setup.h | 0 {include/asm-s390 => arch/s390/include/asm}/sfp-machine.h | 0 {include/asm-s390 => arch/s390/include/asm}/sfp-util.h | 0 {include/asm-s390 => arch/s390/include/asm}/shmbuf.h | 0 {include/asm-s390 => arch/s390/include/asm}/shmparam.h | 0 {include/asm-s390 => arch/s390/include/asm}/sigcontext.h | 0 {include/asm-s390 => arch/s390/include/asm}/siginfo.h | 0 {include/asm-s390 => arch/s390/include/asm}/signal.h | 0 {include/asm-s390 => arch/s390/include/asm}/sigp.h | 0 {include/asm-s390 => arch/s390/include/asm}/smp.h | 0 {include/asm-s390 => arch/s390/include/asm}/socket.h | 0 {include/asm-s390 => arch/s390/include/asm}/sockios.h | 0 {include/asm-s390 => arch/s390/include/asm}/sparsemem.h | 0 {include/asm-s390 => arch/s390/include/asm}/spinlock.h | 0 {include/asm-s390 => arch/s390/include/asm}/spinlock_types.h | 0 {include/asm-s390 => arch/s390/include/asm}/stat.h | 0 {include/asm-s390 => arch/s390/include/asm}/statfs.h | 0 {include/asm-s390 => arch/s390/include/asm}/string.h | 0 {include/asm-s390 => arch/s390/include/asm}/suspend.h | 0 {include/asm-s390 => arch/s390/include/asm}/sysinfo.h | 0 {include/asm-s390 => arch/s390/include/asm}/system.h | 0 {include/asm-s390 => arch/s390/include/asm}/tape390.h | 0 {include/asm-s390 => arch/s390/include/asm}/termbits.h | 0 {include/asm-s390 => arch/s390/include/asm}/termios.h | 0 {include/asm-s390 => arch/s390/include/asm}/thread_info.h | 0 {include/asm-s390 => arch/s390/include/asm}/timer.h | 0 {include/asm-s390 => arch/s390/include/asm}/timex.h | 0 {include/asm-s390 => arch/s390/include/asm}/tlb.h | 0 {include/asm-s390 => arch/s390/include/asm}/tlbflush.h | 0 {include/asm-s390 => arch/s390/include/asm}/todclk.h | 0 {include/asm-s390 => arch/s390/include/asm}/topology.h | 0 {include/asm-s390 => arch/s390/include/asm}/types.h | 0 {include/asm-s390 => arch/s390/include/asm}/uaccess.h | 0 {include/asm-s390 => arch/s390/include/asm}/ucontext.h | 0 {include/asm-s390 => arch/s390/include/asm}/unaligned.h | 0 {include/asm-s390 => arch/s390/include/asm}/unistd.h | 0 {include/asm-s390 => arch/s390/include/asm}/user.h | 0 {include/asm-s390 => arch/s390/include/asm}/vtoc.h | 0 {include/asm-s390 => arch/s390/include/asm}/xor.h | 0 {include/asm-s390 => arch/s390/include/asm}/zcrypt.h | 0 135 files changed, 0 insertions(+), 0 deletions(-) rename {include/asm-s390 => arch/s390/include/asm}/Kbuild (100%) rename {include/asm-s390 => arch/s390/include/asm}/airq.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/appldata.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/atomic.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/auxvec.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/bitops.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/bug.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/bugs.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/byteorder.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/cache.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/cacheflush.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/ccwdev.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/ccwgroup.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/checksum.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/chpid.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/chsc.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/cio.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/cmb.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/compat.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/cpcmd.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/cpu.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/cputime.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/current.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/dasd.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/debug.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/delay.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/device.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/diag.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/div64.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/dma.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/ebcdic.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/elf.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/emergency-restart.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/errno.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/etr.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/extmem.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/fb.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/fcntl.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/fcx.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/futex.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/hardirq.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/hugetlb.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/idals.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/io.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/ioctl.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/ioctls.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/ipcbuf.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/ipl.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/irq.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/irq_regs.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/irqflags.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/isc.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/itcw.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/kdebug.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/kexec.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/kmap_types.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/kprobes.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/kvm.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/kvm_host.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/kvm_para.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/kvm_virtio.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/linkage.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/local.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/lowcore.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/mathemu.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/mman.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/mmu.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/mmu_context.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/module.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/monwriter.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/msgbuf.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/mutex.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/page.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/param.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/pci.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/percpu.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/pgalloc.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/pgtable.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/poll.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/posix_types.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/processor.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/ptrace.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/qdio.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/qeth.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/reset.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/resource.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/rwsem.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/s390_ext.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/s390_rdev.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/scatterlist.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/schid.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/sclp.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/sections.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/segment.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/sembuf.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/setup.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/sfp-machine.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/sfp-util.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/shmbuf.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/shmparam.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/sigcontext.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/siginfo.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/signal.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/sigp.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/smp.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/socket.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/sockios.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/sparsemem.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/spinlock.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/spinlock_types.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/stat.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/statfs.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/string.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/suspend.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/sysinfo.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/system.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/tape390.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/termbits.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/termios.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/thread_info.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/timer.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/timex.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/tlb.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/tlbflush.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/todclk.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/topology.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/types.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/uaccess.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/ucontext.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/unaligned.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/unistd.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/user.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/vtoc.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/xor.h (100%) rename {include/asm-s390 => arch/s390/include/asm}/zcrypt.h (100%) diff --git a/include/asm-s390/Kbuild b/arch/s390/include/asm/Kbuild similarity index 100% rename from include/asm-s390/Kbuild rename to arch/s390/include/asm/Kbuild diff --git a/include/asm-s390/airq.h b/arch/s390/include/asm/airq.h similarity index 100% rename from include/asm-s390/airq.h rename to arch/s390/include/asm/airq.h diff --git a/include/asm-s390/appldata.h b/arch/s390/include/asm/appldata.h similarity index 100% rename from include/asm-s390/appldata.h rename to arch/s390/include/asm/appldata.h diff --git a/include/asm-s390/atomic.h b/arch/s390/include/asm/atomic.h similarity index 100% rename from include/asm-s390/atomic.h rename to arch/s390/include/asm/atomic.h diff --git a/include/asm-s390/auxvec.h b/arch/s390/include/asm/auxvec.h similarity index 100% rename from include/asm-s390/auxvec.h rename to arch/s390/include/asm/auxvec.h diff --git a/include/asm-s390/bitops.h b/arch/s390/include/asm/bitops.h similarity index 100% rename from include/asm-s390/bitops.h rename to arch/s390/include/asm/bitops.h diff --git a/include/asm-s390/bug.h b/arch/s390/include/asm/bug.h similarity index 100% rename from include/asm-s390/bug.h rename to arch/s390/include/asm/bug.h diff --git a/include/asm-s390/bugs.h b/arch/s390/include/asm/bugs.h similarity index 100% rename from include/asm-s390/bugs.h rename to arch/s390/include/asm/bugs.h diff --git a/include/asm-s390/byteorder.h b/arch/s390/include/asm/byteorder.h similarity index 100% rename from include/asm-s390/byteorder.h rename to arch/s390/include/asm/byteorder.h diff --git a/include/asm-s390/cache.h b/arch/s390/include/asm/cache.h similarity index 100% rename from include/asm-s390/cache.h rename to arch/s390/include/asm/cache.h diff --git a/include/asm-s390/cacheflush.h b/arch/s390/include/asm/cacheflush.h similarity index 100% rename from include/asm-s390/cacheflush.h rename to arch/s390/include/asm/cacheflush.h diff --git a/include/asm-s390/ccwdev.h b/arch/s390/include/asm/ccwdev.h similarity index 100% rename from include/asm-s390/ccwdev.h rename to arch/s390/include/asm/ccwdev.h diff --git a/include/asm-s390/ccwgroup.h b/arch/s390/include/asm/ccwgroup.h similarity index 100% rename from include/asm-s390/ccwgroup.h rename to arch/s390/include/asm/ccwgroup.h diff --git a/include/asm-s390/checksum.h b/arch/s390/include/asm/checksum.h similarity index 100% rename from include/asm-s390/checksum.h rename to arch/s390/include/asm/checksum.h diff --git a/include/asm-s390/chpid.h b/arch/s390/include/asm/chpid.h similarity index 100% rename from include/asm-s390/chpid.h rename to arch/s390/include/asm/chpid.h diff --git a/include/asm-s390/chsc.h b/arch/s390/include/asm/chsc.h similarity index 100% rename from include/asm-s390/chsc.h rename to arch/s390/include/asm/chsc.h diff --git a/include/asm-s390/cio.h b/arch/s390/include/asm/cio.h similarity index 100% rename from include/asm-s390/cio.h rename to arch/s390/include/asm/cio.h diff --git a/include/asm-s390/cmb.h b/arch/s390/include/asm/cmb.h similarity index 100% rename from include/asm-s390/cmb.h rename to arch/s390/include/asm/cmb.h diff --git a/include/asm-s390/compat.h b/arch/s390/include/asm/compat.h similarity index 100% rename from include/asm-s390/compat.h rename to arch/s390/include/asm/compat.h diff --git a/include/asm-s390/cpcmd.h b/arch/s390/include/asm/cpcmd.h similarity index 100% rename from include/asm-s390/cpcmd.h rename to arch/s390/include/asm/cpcmd.h diff --git a/include/asm-s390/cpu.h b/arch/s390/include/asm/cpu.h similarity index 100% rename from include/asm-s390/cpu.h rename to arch/s390/include/asm/cpu.h diff --git a/include/asm-s390/cputime.h b/arch/s390/include/asm/cputime.h similarity index 100% rename from include/asm-s390/cputime.h rename to arch/s390/include/asm/cputime.h diff --git a/include/asm-s390/current.h b/arch/s390/include/asm/current.h similarity index 100% rename from include/asm-s390/current.h rename to arch/s390/include/asm/current.h diff --git a/include/asm-s390/dasd.h b/arch/s390/include/asm/dasd.h similarity index 100% rename from include/asm-s390/dasd.h rename to arch/s390/include/asm/dasd.h diff --git a/include/asm-s390/debug.h b/arch/s390/include/asm/debug.h similarity index 100% rename from include/asm-s390/debug.h rename to arch/s390/include/asm/debug.h diff --git a/include/asm-s390/delay.h b/arch/s390/include/asm/delay.h similarity index 100% rename from include/asm-s390/delay.h rename to arch/s390/include/asm/delay.h diff --git a/include/asm-s390/device.h b/arch/s390/include/asm/device.h similarity index 100% rename from include/asm-s390/device.h rename to arch/s390/include/asm/device.h diff --git a/include/asm-s390/diag.h b/arch/s390/include/asm/diag.h similarity index 100% rename from include/asm-s390/diag.h rename to arch/s390/include/asm/diag.h diff --git a/include/asm-s390/div64.h b/arch/s390/include/asm/div64.h similarity index 100% rename from include/asm-s390/div64.h rename to arch/s390/include/asm/div64.h diff --git a/include/asm-s390/dma.h b/arch/s390/include/asm/dma.h similarity index 100% rename from include/asm-s390/dma.h rename to arch/s390/include/asm/dma.h diff --git a/include/asm-s390/ebcdic.h b/arch/s390/include/asm/ebcdic.h similarity index 100% rename from include/asm-s390/ebcdic.h rename to arch/s390/include/asm/ebcdic.h diff --git a/include/asm-s390/elf.h b/arch/s390/include/asm/elf.h similarity index 100% rename from include/asm-s390/elf.h rename to arch/s390/include/asm/elf.h diff --git a/include/asm-s390/emergency-restart.h b/arch/s390/include/asm/emergency-restart.h similarity index 100% rename from include/asm-s390/emergency-restart.h rename to arch/s390/include/asm/emergency-restart.h diff --git a/include/asm-s390/errno.h b/arch/s390/include/asm/errno.h similarity index 100% rename from include/asm-s390/errno.h rename to arch/s390/include/asm/errno.h diff --git a/include/asm-s390/etr.h b/arch/s390/include/asm/etr.h similarity index 100% rename from include/asm-s390/etr.h rename to arch/s390/include/asm/etr.h diff --git a/include/asm-s390/extmem.h b/arch/s390/include/asm/extmem.h similarity index 100% rename from include/asm-s390/extmem.h rename to arch/s390/include/asm/extmem.h diff --git a/include/asm-s390/fb.h b/arch/s390/include/asm/fb.h similarity index 100% rename from include/asm-s390/fb.h rename to arch/s390/include/asm/fb.h diff --git a/include/asm-s390/fcntl.h b/arch/s390/include/asm/fcntl.h similarity index 100% rename from include/asm-s390/fcntl.h rename to arch/s390/include/asm/fcntl.h diff --git a/include/asm-s390/fcx.h b/arch/s390/include/asm/fcx.h similarity index 100% rename from include/asm-s390/fcx.h rename to arch/s390/include/asm/fcx.h diff --git a/include/asm-s390/futex.h b/arch/s390/include/asm/futex.h similarity index 100% rename from include/asm-s390/futex.h rename to arch/s390/include/asm/futex.h diff --git a/include/asm-s390/hardirq.h b/arch/s390/include/asm/hardirq.h similarity index 100% rename from include/asm-s390/hardirq.h rename to arch/s390/include/asm/hardirq.h diff --git a/include/asm-s390/hugetlb.h b/arch/s390/include/asm/hugetlb.h similarity index 100% rename from include/asm-s390/hugetlb.h rename to arch/s390/include/asm/hugetlb.h diff --git a/include/asm-s390/idals.h b/arch/s390/include/asm/idals.h similarity index 100% rename from include/asm-s390/idals.h rename to arch/s390/include/asm/idals.h diff --git a/include/asm-s390/io.h b/arch/s390/include/asm/io.h similarity index 100% rename from include/asm-s390/io.h rename to arch/s390/include/asm/io.h diff --git a/include/asm-s390/ioctl.h b/arch/s390/include/asm/ioctl.h similarity index 100% rename from include/asm-s390/ioctl.h rename to arch/s390/include/asm/ioctl.h diff --git a/include/asm-s390/ioctls.h b/arch/s390/include/asm/ioctls.h similarity index 100% rename from include/asm-s390/ioctls.h rename to arch/s390/include/asm/ioctls.h diff --git a/include/asm-s390/ipcbuf.h b/arch/s390/include/asm/ipcbuf.h similarity index 100% rename from include/asm-s390/ipcbuf.h rename to arch/s390/include/asm/ipcbuf.h diff --git a/include/asm-s390/ipl.h b/arch/s390/include/asm/ipl.h similarity index 100% rename from include/asm-s390/ipl.h rename to arch/s390/include/asm/ipl.h diff --git a/include/asm-s390/irq.h b/arch/s390/include/asm/irq.h similarity index 100% rename from include/asm-s390/irq.h rename to arch/s390/include/asm/irq.h diff --git a/include/asm-s390/irq_regs.h b/arch/s390/include/asm/irq_regs.h similarity index 100% rename from include/asm-s390/irq_regs.h rename to arch/s390/include/asm/irq_regs.h diff --git a/include/asm-s390/irqflags.h b/arch/s390/include/asm/irqflags.h similarity index 100% rename from include/asm-s390/irqflags.h rename to arch/s390/include/asm/irqflags.h diff --git a/include/asm-s390/isc.h b/arch/s390/include/asm/isc.h similarity index 100% rename from include/asm-s390/isc.h rename to arch/s390/include/asm/isc.h diff --git a/include/asm-s390/itcw.h b/arch/s390/include/asm/itcw.h similarity index 100% rename from include/asm-s390/itcw.h rename to arch/s390/include/asm/itcw.h diff --git a/include/asm-s390/kdebug.h b/arch/s390/include/asm/kdebug.h similarity index 100% rename from include/asm-s390/kdebug.h rename to arch/s390/include/asm/kdebug.h diff --git a/include/asm-s390/kexec.h b/arch/s390/include/asm/kexec.h similarity index 100% rename from include/asm-s390/kexec.h rename to arch/s390/include/asm/kexec.h diff --git a/include/asm-s390/kmap_types.h b/arch/s390/include/asm/kmap_types.h similarity index 100% rename from include/asm-s390/kmap_types.h rename to arch/s390/include/asm/kmap_types.h diff --git a/include/asm-s390/kprobes.h b/arch/s390/include/asm/kprobes.h similarity index 100% rename from include/asm-s390/kprobes.h rename to arch/s390/include/asm/kprobes.h diff --git a/include/asm-s390/kvm.h b/arch/s390/include/asm/kvm.h similarity index 100% rename from include/asm-s390/kvm.h rename to arch/s390/include/asm/kvm.h diff --git a/include/asm-s390/kvm_host.h b/arch/s390/include/asm/kvm_host.h similarity index 100% rename from include/asm-s390/kvm_host.h rename to arch/s390/include/asm/kvm_host.h diff --git a/include/asm-s390/kvm_para.h b/arch/s390/include/asm/kvm_para.h similarity index 100% rename from include/asm-s390/kvm_para.h rename to arch/s390/include/asm/kvm_para.h diff --git a/include/asm-s390/kvm_virtio.h b/arch/s390/include/asm/kvm_virtio.h similarity index 100% rename from include/asm-s390/kvm_virtio.h rename to arch/s390/include/asm/kvm_virtio.h diff --git a/include/asm-s390/linkage.h b/arch/s390/include/asm/linkage.h similarity index 100% rename from include/asm-s390/linkage.h rename to arch/s390/include/asm/linkage.h diff --git a/include/asm-s390/local.h b/arch/s390/include/asm/local.h similarity index 100% rename from include/asm-s390/local.h rename to arch/s390/include/asm/local.h diff --git a/include/asm-s390/lowcore.h b/arch/s390/include/asm/lowcore.h similarity index 100% rename from include/asm-s390/lowcore.h rename to arch/s390/include/asm/lowcore.h diff --git a/include/asm-s390/mathemu.h b/arch/s390/include/asm/mathemu.h similarity index 100% rename from include/asm-s390/mathemu.h rename to arch/s390/include/asm/mathemu.h diff --git a/include/asm-s390/mman.h b/arch/s390/include/asm/mman.h similarity index 100% rename from include/asm-s390/mman.h rename to arch/s390/include/asm/mman.h diff --git a/include/asm-s390/mmu.h b/arch/s390/include/asm/mmu.h similarity index 100% rename from include/asm-s390/mmu.h rename to arch/s390/include/asm/mmu.h diff --git a/include/asm-s390/mmu_context.h b/arch/s390/include/asm/mmu_context.h similarity index 100% rename from include/asm-s390/mmu_context.h rename to arch/s390/include/asm/mmu_context.h diff --git a/include/asm-s390/module.h b/arch/s390/include/asm/module.h similarity index 100% rename from include/asm-s390/module.h rename to arch/s390/include/asm/module.h diff --git a/include/asm-s390/monwriter.h b/arch/s390/include/asm/monwriter.h similarity index 100% rename from include/asm-s390/monwriter.h rename to arch/s390/include/asm/monwriter.h diff --git a/include/asm-s390/msgbuf.h b/arch/s390/include/asm/msgbuf.h similarity index 100% rename from include/asm-s390/msgbuf.h rename to arch/s390/include/asm/msgbuf.h diff --git a/include/asm-s390/mutex.h b/arch/s390/include/asm/mutex.h similarity index 100% rename from include/asm-s390/mutex.h rename to arch/s390/include/asm/mutex.h diff --git a/include/asm-s390/page.h b/arch/s390/include/asm/page.h similarity index 100% rename from include/asm-s390/page.h rename to arch/s390/include/asm/page.h diff --git a/include/asm-s390/param.h b/arch/s390/include/asm/param.h similarity index 100% rename from include/asm-s390/param.h rename to arch/s390/include/asm/param.h diff --git a/include/asm-s390/pci.h b/arch/s390/include/asm/pci.h similarity index 100% rename from include/asm-s390/pci.h rename to arch/s390/include/asm/pci.h diff --git a/include/asm-s390/percpu.h b/arch/s390/include/asm/percpu.h similarity index 100% rename from include/asm-s390/percpu.h rename to arch/s390/include/asm/percpu.h diff --git a/include/asm-s390/pgalloc.h b/arch/s390/include/asm/pgalloc.h similarity index 100% rename from include/asm-s390/pgalloc.h rename to arch/s390/include/asm/pgalloc.h diff --git a/include/asm-s390/pgtable.h b/arch/s390/include/asm/pgtable.h similarity index 100% rename from include/asm-s390/pgtable.h rename to arch/s390/include/asm/pgtable.h diff --git a/include/asm-s390/poll.h b/arch/s390/include/asm/poll.h similarity index 100% rename from include/asm-s390/poll.h rename to arch/s390/include/asm/poll.h diff --git a/include/asm-s390/posix_types.h b/arch/s390/include/asm/posix_types.h similarity index 100% rename from include/asm-s390/posix_types.h rename to arch/s390/include/asm/posix_types.h diff --git a/include/asm-s390/processor.h b/arch/s390/include/asm/processor.h similarity index 100% rename from include/asm-s390/processor.h rename to arch/s390/include/asm/processor.h diff --git a/include/asm-s390/ptrace.h b/arch/s390/include/asm/ptrace.h similarity index 100% rename from include/asm-s390/ptrace.h rename to arch/s390/include/asm/ptrace.h diff --git a/include/asm-s390/qdio.h b/arch/s390/include/asm/qdio.h similarity index 100% rename from include/asm-s390/qdio.h rename to arch/s390/include/asm/qdio.h diff --git a/include/asm-s390/qeth.h b/arch/s390/include/asm/qeth.h similarity index 100% rename from include/asm-s390/qeth.h rename to arch/s390/include/asm/qeth.h diff --git a/include/asm-s390/reset.h b/arch/s390/include/asm/reset.h similarity index 100% rename from include/asm-s390/reset.h rename to arch/s390/include/asm/reset.h diff --git a/include/asm-s390/resource.h b/arch/s390/include/asm/resource.h similarity index 100% rename from include/asm-s390/resource.h rename to arch/s390/include/asm/resource.h diff --git a/include/asm-s390/rwsem.h b/arch/s390/include/asm/rwsem.h similarity index 100% rename from include/asm-s390/rwsem.h rename to arch/s390/include/asm/rwsem.h diff --git a/include/asm-s390/s390_ext.h b/arch/s390/include/asm/s390_ext.h similarity index 100% rename from include/asm-s390/s390_ext.h rename to arch/s390/include/asm/s390_ext.h diff --git a/include/asm-s390/s390_rdev.h b/arch/s390/include/asm/s390_rdev.h similarity index 100% rename from include/asm-s390/s390_rdev.h rename to arch/s390/include/asm/s390_rdev.h diff --git a/include/asm-s390/scatterlist.h b/arch/s390/include/asm/scatterlist.h similarity index 100% rename from include/asm-s390/scatterlist.h rename to arch/s390/include/asm/scatterlist.h diff --git a/include/asm-s390/schid.h b/arch/s390/include/asm/schid.h similarity index 100% rename from include/asm-s390/schid.h rename to arch/s390/include/asm/schid.h diff --git a/include/asm-s390/sclp.h b/arch/s390/include/asm/sclp.h similarity index 100% rename from include/asm-s390/sclp.h rename to arch/s390/include/asm/sclp.h diff --git a/include/asm-s390/sections.h b/arch/s390/include/asm/sections.h similarity index 100% rename from include/asm-s390/sections.h rename to arch/s390/include/asm/sections.h diff --git a/include/asm-s390/segment.h b/arch/s390/include/asm/segment.h similarity index 100% rename from include/asm-s390/segment.h rename to arch/s390/include/asm/segment.h diff --git a/include/asm-s390/sembuf.h b/arch/s390/include/asm/sembuf.h similarity index 100% rename from include/asm-s390/sembuf.h rename to arch/s390/include/asm/sembuf.h diff --git a/include/asm-s390/setup.h b/arch/s390/include/asm/setup.h similarity index 100% rename from include/asm-s390/setup.h rename to arch/s390/include/asm/setup.h diff --git a/include/asm-s390/sfp-machine.h b/arch/s390/include/asm/sfp-machine.h similarity index 100% rename from include/asm-s390/sfp-machine.h rename to arch/s390/include/asm/sfp-machine.h diff --git a/include/asm-s390/sfp-util.h b/arch/s390/include/asm/sfp-util.h similarity index 100% rename from include/asm-s390/sfp-util.h rename to arch/s390/include/asm/sfp-util.h diff --git a/include/asm-s390/shmbuf.h b/arch/s390/include/asm/shmbuf.h similarity index 100% rename from include/asm-s390/shmbuf.h rename to arch/s390/include/asm/shmbuf.h diff --git a/include/asm-s390/shmparam.h b/arch/s390/include/asm/shmparam.h similarity index 100% rename from include/asm-s390/shmparam.h rename to arch/s390/include/asm/shmparam.h diff --git a/include/asm-s390/sigcontext.h b/arch/s390/include/asm/sigcontext.h similarity index 100% rename from include/asm-s390/sigcontext.h rename to arch/s390/include/asm/sigcontext.h diff --git a/include/asm-s390/siginfo.h b/arch/s390/include/asm/siginfo.h similarity index 100% rename from include/asm-s390/siginfo.h rename to arch/s390/include/asm/siginfo.h diff --git a/include/asm-s390/signal.h b/arch/s390/include/asm/signal.h similarity index 100% rename from include/asm-s390/signal.h rename to arch/s390/include/asm/signal.h diff --git a/include/asm-s390/sigp.h b/arch/s390/include/asm/sigp.h similarity index 100% rename from include/asm-s390/sigp.h rename to arch/s390/include/asm/sigp.h diff --git a/include/asm-s390/smp.h b/arch/s390/include/asm/smp.h similarity index 100% rename from include/asm-s390/smp.h rename to arch/s390/include/asm/smp.h diff --git a/include/asm-s390/socket.h b/arch/s390/include/asm/socket.h similarity index 100% rename from include/asm-s390/socket.h rename to arch/s390/include/asm/socket.h diff --git a/include/asm-s390/sockios.h b/arch/s390/include/asm/sockios.h similarity index 100% rename from include/asm-s390/sockios.h rename to arch/s390/include/asm/sockios.h diff --git a/include/asm-s390/sparsemem.h b/arch/s390/include/asm/sparsemem.h similarity index 100% rename from include/asm-s390/sparsemem.h rename to arch/s390/include/asm/sparsemem.h diff --git a/include/asm-s390/spinlock.h b/arch/s390/include/asm/spinlock.h similarity index 100% rename from include/asm-s390/spinlock.h rename to arch/s390/include/asm/spinlock.h diff --git a/include/asm-s390/spinlock_types.h b/arch/s390/include/asm/spinlock_types.h similarity index 100% rename from include/asm-s390/spinlock_types.h rename to arch/s390/include/asm/spinlock_types.h diff --git a/include/asm-s390/stat.h b/arch/s390/include/asm/stat.h similarity index 100% rename from include/asm-s390/stat.h rename to arch/s390/include/asm/stat.h diff --git a/include/asm-s390/statfs.h b/arch/s390/include/asm/statfs.h similarity index 100% rename from include/asm-s390/statfs.h rename to arch/s390/include/asm/statfs.h diff --git a/include/asm-s390/string.h b/arch/s390/include/asm/string.h similarity index 100% rename from include/asm-s390/string.h rename to arch/s390/include/asm/string.h diff --git a/include/asm-s390/suspend.h b/arch/s390/include/asm/suspend.h similarity index 100% rename from include/asm-s390/suspend.h rename to arch/s390/include/asm/suspend.h diff --git a/include/asm-s390/sysinfo.h b/arch/s390/include/asm/sysinfo.h similarity index 100% rename from include/asm-s390/sysinfo.h rename to arch/s390/include/asm/sysinfo.h diff --git a/include/asm-s390/system.h b/arch/s390/include/asm/system.h similarity index 100% rename from include/asm-s390/system.h rename to arch/s390/include/asm/system.h diff --git a/include/asm-s390/tape390.h b/arch/s390/include/asm/tape390.h similarity index 100% rename from include/asm-s390/tape390.h rename to arch/s390/include/asm/tape390.h diff --git a/include/asm-s390/termbits.h b/arch/s390/include/asm/termbits.h similarity index 100% rename from include/asm-s390/termbits.h rename to arch/s390/include/asm/termbits.h diff --git a/include/asm-s390/termios.h b/arch/s390/include/asm/termios.h similarity index 100% rename from include/asm-s390/termios.h rename to arch/s390/include/asm/termios.h diff --git a/include/asm-s390/thread_info.h b/arch/s390/include/asm/thread_info.h similarity index 100% rename from include/asm-s390/thread_info.h rename to arch/s390/include/asm/thread_info.h diff --git a/include/asm-s390/timer.h b/arch/s390/include/asm/timer.h similarity index 100% rename from include/asm-s390/timer.h rename to arch/s390/include/asm/timer.h diff --git a/include/asm-s390/timex.h b/arch/s390/include/asm/timex.h similarity index 100% rename from include/asm-s390/timex.h rename to arch/s390/include/asm/timex.h diff --git a/include/asm-s390/tlb.h b/arch/s390/include/asm/tlb.h similarity index 100% rename from include/asm-s390/tlb.h rename to arch/s390/include/asm/tlb.h diff --git a/include/asm-s390/tlbflush.h b/arch/s390/include/asm/tlbflush.h similarity index 100% rename from include/asm-s390/tlbflush.h rename to arch/s390/include/asm/tlbflush.h diff --git a/include/asm-s390/todclk.h b/arch/s390/include/asm/todclk.h similarity index 100% rename from include/asm-s390/todclk.h rename to arch/s390/include/asm/todclk.h diff --git a/include/asm-s390/topology.h b/arch/s390/include/asm/topology.h similarity index 100% rename from include/asm-s390/topology.h rename to arch/s390/include/asm/topology.h diff --git a/include/asm-s390/types.h b/arch/s390/include/asm/types.h similarity index 100% rename from include/asm-s390/types.h rename to arch/s390/include/asm/types.h diff --git a/include/asm-s390/uaccess.h b/arch/s390/include/asm/uaccess.h similarity index 100% rename from include/asm-s390/uaccess.h rename to arch/s390/include/asm/uaccess.h diff --git a/include/asm-s390/ucontext.h b/arch/s390/include/asm/ucontext.h similarity index 100% rename from include/asm-s390/ucontext.h rename to arch/s390/include/asm/ucontext.h diff --git a/include/asm-s390/unaligned.h b/arch/s390/include/asm/unaligned.h similarity index 100% rename from include/asm-s390/unaligned.h rename to arch/s390/include/asm/unaligned.h diff --git a/include/asm-s390/unistd.h b/arch/s390/include/asm/unistd.h similarity index 100% rename from include/asm-s390/unistd.h rename to arch/s390/include/asm/unistd.h diff --git a/include/asm-s390/user.h b/arch/s390/include/asm/user.h similarity index 100% rename from include/asm-s390/user.h rename to arch/s390/include/asm/user.h diff --git a/include/asm-s390/vtoc.h b/arch/s390/include/asm/vtoc.h similarity index 100% rename from include/asm-s390/vtoc.h rename to arch/s390/include/asm/vtoc.h diff --git a/include/asm-s390/xor.h b/arch/s390/include/asm/xor.h similarity index 100% rename from include/asm-s390/xor.h rename to arch/s390/include/asm/xor.h diff --git a/include/asm-s390/zcrypt.h b/arch/s390/include/asm/zcrypt.h similarity index 100% rename from include/asm-s390/zcrypt.h rename to arch/s390/include/asm/zcrypt.h -- GitLab From 5c7edcd7ee6b77b88252fe4096dce1a46a60c829 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Thu, 31 Jul 2008 02:04:09 -0700 Subject: [PATCH 0581/1024] tracehook: fix exit_signal=0 case My commit 2b2a1ff64afbadac842bbc58c5166962cf4f7664 introduced a regression (sorry about that) for the odd case of exit_signal=0 (e.g. clone_flags=0). This is not a normal use, but it's used by a case in the glibc test suite. Dying with exit_signal=0 sends no signal, but it's supposed to wake up a parent's blocked wait*() calls (unlike the delayed_group_leader case). This fixes tracehook_notify_death() and its caller to distinguish a "signal 0" wakeup from the delayed_group_leader case (with no wakeup). Signed-off-by: Roland McGrath Tested-by: Serge Hallyn Signed-off-by: Linus Torvalds --- include/linux/tracehook.h | 21 +++++++++++++-------- kernel/exit.c | 6 +++--- 2 files changed, 16 insertions(+), 11 deletions(-) diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index b1875582c1a..12532839f50 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -493,16 +493,21 @@ static inline int tracehook_notify_jctl(int notify, int why) * @death_cookie: value to pass to tracehook_report_death() * @group_dead: nonzero if this was the last thread in the group to die * - * Return the signal number to send our parent with do_notify_parent(), or - * zero to send no signal and leave a zombie, or -1 to self-reap right now. + * A return value >= 0 means call do_notify_parent() with that signal + * number. Negative return value can be %DEATH_REAP to self-reap right + * now, or %DEATH_DELAYED_GROUP_LEADER to a zombie without notifying our + * parent. Note that a return value of 0 means a do_notify_parent() call + * that sends no signal, but still wakes up a parent blocked in wait*(). * * Called with write_lock_irq(&tasklist_lock) held. */ +#define DEATH_REAP -1 +#define DEATH_DELAYED_GROUP_LEADER -2 static inline int tracehook_notify_death(struct task_struct *task, void **death_cookie, int group_dead) { if (task->exit_signal == -1) - return task->ptrace ? SIGCHLD : -1; + return task->ptrace ? SIGCHLD : DEATH_REAP; /* * If something other than our normal parent is ptracing us, then @@ -512,21 +517,21 @@ static inline int tracehook_notify_death(struct task_struct *task, if (thread_group_empty(task) && !ptrace_reparented(task)) return task->exit_signal; - return task->ptrace ? SIGCHLD : 0; + return task->ptrace ? SIGCHLD : DEATH_DELAYED_GROUP_LEADER; } /** * tracehook_report_death - task is dead and ready to be reaped * @task: @current task now exiting - * @signal: signal number sent to parent, or 0 or -1 + * @signal: return value from tracheook_notify_death() * @death_cookie: value passed back from tracehook_notify_death() * @group_dead: nonzero if this was the last thread in the group to die * * Thread has just become a zombie or is about to self-reap. If positive, * @signal is the signal number just sent to the parent (usually %SIGCHLD). - * If @signal is -1, this thread will self-reap. If @signal is 0, this is - * a delayed_group_leader() zombie. The @death_cookie was passed back by - * tracehook_notify_death(). + * If @signal is %DEATH_REAP, this thread will self-reap. If @signal is + * %DEATH_DELAYED_GROUP_LEADER, this is a delayed_group_leader() zombie. + * The @death_cookie was passed back by tracehook_notify_death(). * * If normal reaping is not inhibited, @task->exit_state might be changing * in parallel. diff --git a/kernel/exit.c b/kernel/exit.c index eb4d6470d1d..38ec4063014 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -911,10 +911,10 @@ static void exit_notify(struct task_struct *tsk, int group_dead) tsk->exit_signal = SIGCHLD; signal = tracehook_notify_death(tsk, &cookie, group_dead); - if (signal > 0) + if (signal >= 0) signal = do_notify_parent(tsk, signal); - tsk->exit_state = signal < 0 ? EXIT_DEAD : EXIT_ZOMBIE; + tsk->exit_state = signal == DEATH_REAP ? EXIT_DEAD : EXIT_ZOMBIE; /* mt-exec, de_thread() is waiting for us */ if (thread_group_leader(tsk) && @@ -927,7 +927,7 @@ static void exit_notify(struct task_struct *tsk, int group_dead) tracehook_report_death(tsk, signal, cookie, group_dead); /* If the process is dead, release it - nobody will wait for it */ - if (signal < 0) + if (signal == DEATH_REAP) release_task(tsk); } -- GitLab From 3b0de7b364c8b8a975f201fdae2fb394c876eb56 Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Fri, 1 Aug 2008 14:19:08 -0500 Subject: [PATCH 0582/1024] add dependency of CONFIG_SGI_XP upon CONFIG_NET Add a dependency of CONFIG_SGI_XP upon CONFIG_NET to Kconfig. Signed-off-by: Dean Nelson Signed-off-by: Linus Torvalds --- drivers/misc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index fa50e9ede0e..0db06f1f4b5 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -426,6 +426,7 @@ config ENCLOSURE_SERVICES config SGI_XP tristate "Support communication between SGI SSIs" + depends on NET depends on IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || (X86_64 && SMP) select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 -- GitLab From 46bd58eab21650fe820e4e3a27a6a134892cc2eb Mon Sep 17 00:00:00 2001 From: Dean Nelson Date: Fri, 1 Aug 2008 09:55:26 -0500 Subject: [PATCH 0583/1024] add reverse dependency of CONFIG_SGI_XP upon CONFIG_SGI_GRU Add a reverse dependency of CONFIG_SGI_XP upon CONFIG_SGI_GRU to Kconfig. Signed-off-by: Dean Nelson Signed-off-by: Linus Torvalds --- drivers/misc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 0db06f1f4b5..82af385460e 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -430,6 +430,7 @@ config SGI_XP depends on IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || (X86_64 && SMP) select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 + select SGI_GRU if IA64_GENERIC || IA64_SGI_UV || (X86_64 && SMP) ---help--- An SGI machine can be divided into multiple Single System Images which act independently of each other and have -- GitLab From 0bacdf303f72a3ed34252934114bc04e79222687 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Wed, 30 Jul 2008 13:18:59 +0300 Subject: [PATCH 0584/1024] ath5k: Update register list * Update list of registers * Use updated register macros inside hw.c, initvals.c and debug.c Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/debug.c | 2 +- drivers/net/wireless/ath5k/hw.c | 43 +- drivers/net/wireless/ath5k/initvals.c | 4 +- drivers/net/wireless/ath5k/reg.h | 934 +++++++++++++++++++------- 4 files changed, 720 insertions(+), 263 deletions(-) diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 41d5fa34b54..6fa6c8e04ff 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -129,7 +129,7 @@ static struct reg regs[] = { REG_STRUCT_INIT(AR5K_CPC1), REG_STRUCT_INIT(AR5K_CPC2), REG_STRUCT_INIT(AR5K_CPC3), - REG_STRUCT_INIT(AR5K_CPCORN), + REG_STRUCT_INIT(AR5K_CPCOVF), REG_STRUCT_INIT(AR5K_RESET_CTL), REG_STRUCT_INIT(AR5K_SLEEP_CTL), REG_STRUCT_INIT(AR5K_INTPEND), diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index 7ca87a55731..42ef41ed5d1 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -843,27 +843,26 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, * Write some more initial register settings */ if (ah->ah_version == AR5K_AR5212) { - ath5k_hw_reg_write(ah, 0x0002a002, AR5K_PHY(11)); + ath5k_hw_reg_write(ah, 0x0002a002, 0x982c); if (channel->hw_value == CHANNEL_G) if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413) ath5k_hw_reg_write(ah, 0x00f80d80, - AR5K_PHY(83)); + 0x994c); else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424) ath5k_hw_reg_write(ah, 0x00380140, - AR5K_PHY(83)); + 0x994c); else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425) ath5k_hw_reg_write(ah, 0x00fc0ec0, - AR5K_PHY(83)); + 0x994c); else /* 2425 */ ath5k_hw_reg_write(ah, 0x00fc0fc0, - AR5K_PHY(83)); + 0x994c); else - ath5k_hw_reg_write(ah, 0x00000000, - AR5K_PHY(83)); + ath5k_hw_reg_write(ah, 0x00000000, 0x994c); ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); - ath5k_hw_reg_write(ah, 0x0000000f, 0x8060); + ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); ath5k_hw_reg_write(ah, 0x00000000, 0xa254); ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL); } @@ -935,7 +934,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, return ret; /* Set antenna mode */ - AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x44), + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL, ah->ah_antenna[ee_mode][0], 0xfffffc06); /* @@ -965,15 +964,15 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, ath5k_hw_reg_write(ah, AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]), - AR5K_PHY(0x5a)); + AR5K_PHY_NFTHRES); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x11), + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING, (ee->ee_switch_settling[ee_mode] << 7) & 0x3f80, 0xffffc07f); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x12), + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN, (ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000, 0xfffc0fff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x14), + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE, (ee->ee_adc_desired_size[ee_mode] & 0x00ff) | ((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00), 0xffff0000); @@ -982,13 +981,13 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, (ee->ee_tx_end2xpa_disable[ee_mode] << 24) | (ee->ee_tx_end2xpa_disable[ee_mode] << 16) | (ee->ee_tx_frm2xpa_enable[ee_mode] << 8) | - (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY(0x0d)); + (ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x0a), + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3, ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x19), + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF, (ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff); - AR5K_REG_MASKED_BITS(ah, AR5K_PHY(0x49), 4, 0xffffff01); + AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01); AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE | @@ -3363,11 +3362,13 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) ath5k_hw_reg_write(ah, ah->ah_turbo ? AR5K_INIT_PROTO_TIME_CNTRL_TURBO : AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1); - /* Set PHY register 0x9844 (??) */ + /* Set AR5K_PHY_SETTLING */ ath5k_hw_reg_write(ah, ah->ah_turbo ? - (ath5k_hw_reg_read(ah, AR5K_PHY(17)) & ~0x7F) | 0x38 : - (ath5k_hw_reg_read(ah, AR5K_PHY(17)) & ~0x7F) | 0x1C, - AR5K_PHY(17)); + (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) + | 0x38 : + (ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F) + | 0x1C, + AR5K_PHY_SETTLING); /* Set Frame Control Register */ ath5k_hw_reg_write(ah, ah->ah_turbo ? (AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE | diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c index 04c84e9da89..2806b21bf90 100644 --- a/drivers/net/wireless/ath5k/initvals.c +++ b/drivers/net/wireless/ath5k/initvals.c @@ -489,7 +489,7 @@ static const struct ath5k_ini ar5212_ini[] = { { AR5K_QUEUE_TXDP(9), 0x00000000 }, { AR5K_DCU_FP, 0x00000000 }, { AR5K_DCU_TXP, 0x00000000 }, - { AR5K_DCU_TX_FILTER, 0x00000000 }, + { AR5K_DCU_TX_FILTER_0_BASE, 0x00000000 }, /* Unknown table */ { 0x1078, 0x00000000 }, { 0x10b8, 0x00000000 }, @@ -679,7 +679,7 @@ static const struct ath5k_ini ar5212_ini[] = { { AR5K_PHY(645), 0x00106c10 }, { AR5K_PHY(646), 0x009c4060 }, { AR5K_PHY(647), 0x1483800a }, - /* { AR5K_PHY(648), 0x018830c6 },*/ /* 2413 */ + /* { AR5K_PHY(648), 0x018830c6 },*/ /* 2413/2425 */ { AR5K_PHY(648), 0x01831061 }, { AR5K_PHY(649), 0x00000400 }, /*{ AR5K_PHY(650), 0x000001b5 },*/ diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h index 30629b3e37c..7562bf173d3 100644 --- a/drivers/net/wireless/ath5k/reg.h +++ b/drivers/net/wireless/ath5k/reg.h @@ -53,7 +53,7 @@ #define AR5K_CR_TXD0 0x00000008 /* TX Disable for queue 0 on 5210 */ #define AR5K_CR_TXD1 0x00000010 /* TX Disable for queue 1 on 5210 */ #define AR5K_CR_RXD 0x00000020 /* RX Disable */ -#define AR5K_CR_SWI 0x00000040 +#define AR5K_CR_SWI 0x00000040 /* Software Interrupt */ /* * RX Descriptor Pointer register @@ -65,19 +65,19 @@ */ #define AR5K_CFG 0x0014 /* Register Address */ #define AR5K_CFG_SWTD 0x00000001 /* Byte-swap TX descriptor (for big endian archs) */ -#define AR5K_CFG_SWTB 0x00000002 /* Byte-swap TX buffer (?) */ +#define AR5K_CFG_SWTB 0x00000002 /* Byte-swap TX buffer */ #define AR5K_CFG_SWRD 0x00000004 /* Byte-swap RX descriptor */ -#define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer (?) */ -#define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register values (?) */ -#define AR5K_CFG_ADHOC 0x00000020 /* [5211+] */ +#define AR5K_CFG_SWRB 0x00000008 /* Byte-swap RX buffer */ +#define AR5K_CFG_SWRG 0x00000010 /* Byte-swap Register access */ +#define AR5K_CFG_ADHOC 0x00000020 /* AP/Adhoc indication [5211+] */ #define AR5K_CFG_PHY_OK 0x00000100 /* [5211+] */ #define AR5K_CFG_EEBS 0x00000200 /* EEPROM is busy */ -#define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (?) */ +#define AR5K_CFG_CLKGD 0x00000400 /* Clock gated (Disable dynamic clock) */ #define AR5K_CFG_TXCNT 0x00007800 /* Tx frame count (?) [5210] */ #define AR5K_CFG_TXCNT_S 11 #define AR5K_CFG_TXFSTAT 0x00008000 /* Tx frame status (?) [5210] */ #define AR5K_CFG_TXFSTRT 0x00010000 /* [5210] */ -#define AR5K_CFG_PCI_THRES 0x00060000 /* [5211+] */ +#define AR5K_CFG_PCI_THRES 0x00060000 /* PCI Master req q threshold [5211+] */ #define AR5K_CFG_PCI_THRES_S 17 /* @@ -162,35 +162,40 @@ /* * Transmit configuration register */ -#define AR5K_TXCFG 0x0030 /* Register Address */ -#define AR5K_TXCFG_SDMAMR 0x00000007 /* DMA size */ -#define AR5K_TXCFG_SDMAMR_S 0 -#define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ -#define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ -#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */ -#define AR5K_TXCFG_TXFULL_S 4 -#define AR5K_TXCFG_TXFULL_0B 0x00000000 -#define AR5K_TXCFG_TXFULL_64B 0x00000010 -#define AR5K_TXCFG_TXFULL_128B 0x00000020 -#define AR5K_TXCFG_TXFULL_192B 0x00000030 -#define AR5K_TXCFG_TXFULL_256B 0x00000040 -#define AR5K_TXCFG_TXCONT_EN 0x00000080 -#define AR5K_TXCFG_DMASIZE 0x00000100 /* Flag for passing DMA size [5210] */ -#define AR5K_TXCFG_JUMBO_TXE 0x00000400 /* Enable jumbo frames transmition (?) [5211+] */ -#define AR5K_TXCFG_RTSRND 0x00001000 /* [5211+] */ -#define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */ -#define AR5K_TXCFG_RDY_DIS 0x00004000 /* [5211+] */ +#define AR5K_TXCFG 0x0030 /* Register Address */ +#define AR5K_TXCFG_SDMAMR 0x00000007 /* DMA size (read) */ +#define AR5K_TXCFG_SDMAMR_S 0 +#define AR5K_TXCFG_B_MODE 0x00000008 /* Set b mode for 5111 (enable 2111) */ +#define AR5K_TXCFG_TXFSTP 0x00000008 /* TX DMA full Stop [5210] */ +#define AR5K_TXCFG_TXFULL 0x000003f0 /* TX Triger level mask */ +#define AR5K_TXCFG_TXFULL_S 4 +#define AR5K_TXCFG_TXFULL_0B 0x00000000 +#define AR5K_TXCFG_TXFULL_64B 0x00000010 +#define AR5K_TXCFG_TXFULL_128B 0x00000020 +#define AR5K_TXCFG_TXFULL_192B 0x00000030 +#define AR5K_TXCFG_TXFULL_256B 0x00000040 +#define AR5K_TXCFG_TXCONT_EN 0x00000080 +#define AR5K_TXCFG_DMASIZE 0x00000100 /* Flag for passing DMA size [5210] */ +#define AR5K_TXCFG_JUMBO_DESC_EN 0x00000400 /* Enable jumbo tx descriptors [5211+] */ +#define AR5K_TXCFG_ADHOC_BCN_ATIM 0x00000800 /* Adhoc Beacon ATIM Policy */ +#define AR5K_TXCFG_ATIM_WINDOW_DEF_DIS 0x00001000 /* Disable ATIM window defer [5211+] */ +#define AR5K_TXCFG_RTSRND 0x00001000 /* [5211+] */ +#define AR5K_TXCFG_FRMPAD_DIS 0x00002000 /* [5211+] */ +#define AR5K_TXCFG_RDY_CBR_DIS 0x00004000 /* Ready time CBR disable [5211+] */ +#define AR5K_TXCFG_JUMBO_FRM_MODE 0x00008000 /* Jumbo frame mode [5211+] */ +#define AR5K_TXCFG_DCU_CACHING_DIS 0x00010000 /* Disable DCU caching */ /* * Receive configuration register */ #define AR5K_RXCFG 0x0034 /* Register Address */ -#define AR5K_RXCFG_SDMAMW 0x00000007 /* DMA size */ +#define AR5K_RXCFG_SDMAMW 0x00000007 /* DMA size (write) */ #define AR5K_RXCFG_SDMAMW_S 0 -#define AR5K_RXCFG_DEF_ANTENNA 0x00000008 /* Default antenna */ -#define AR5K_RXCFG_ZLFDMA 0x00000010 /* Zero-length DMA */ -#define AR5K_RXCFG_JUMBO_RXE 0x00000020 /* Enable jumbo frames reception (?) [5211+] */ -#define AR5K_RXCFG_JUMBO_WRAP 0x00000040 /* Wrap jumbo frames (?) [5211+] */ +#define AR5K_RXCFG_ZLFDMA 0x00000008 /* Enable Zero-length frame DMA */ +#define AR5K_RXCFG_DEF_ANTENNA 0x00000010 /* Default antenna (?) */ +#define AR5K_RXCFG_JUMBO_RXE 0x00000020 /* Enable jumbo rx descriptors [5211+] */ +#define AR5K_RXCFG_JUMBO_WRAP 0x00000040 /* Wrap jumbo frames [5211+] */ +#define AR5K_RXCFG_SLE_ENTRY 0x00000080 /* Sleep entry policy */ /* * Receive jumbo descriptor last address register @@ -202,35 +207,35 @@ * MIB control register */ #define AR5K_MIBC 0x0040 /* Register Address */ -#define AR5K_MIBC_COW 0x00000001 -#define AR5K_MIBC_FMC 0x00000002 /* Freeze Mib Counters (?) */ -#define AR5K_MIBC_CMC 0x00000004 /* Clean Mib Counters (?) */ -#define AR5K_MIBC_MCS 0x00000008 +#define AR5K_MIBC_COW 0x00000001 /* Warn test indicator */ +#define AR5K_MIBC_FMC 0x00000002 /* Freeze MIB Counters */ +#define AR5K_MIBC_CMC 0x00000004 /* Clean MIB Counters */ +#define AR5K_MIBC_MCS 0x00000008 /* MIB counter strobe */ /* * Timeout prescale register */ #define AR5K_TOPS 0x0044 -#define AR5K_TOPS_M 0x0000ffff /* [5211+] (?) */ +#define AR5K_TOPS_M 0x0000ffff /* * Receive timeout register (no frame received) */ #define AR5K_RXNOFRM 0x0048 -#define AR5K_RXNOFRM_M 0x000003ff /* [5211+] (?) */ +#define AR5K_RXNOFRM_M 0x000003ff /* * Transmit timeout register (no frame sent) */ #define AR5K_TXNOFRM 0x004c -#define AR5K_TXNOFRM_M 0x000003ff /* [5211+] (?) */ -#define AR5K_TXNOFRM_QCU 0x000ffc00 /* [5211+] (?) */ +#define AR5K_TXNOFRM_M 0x000003ff +#define AR5K_TXNOFRM_QCU 0x000ffc00 /* * Receive frame gap timeout register */ #define AR5K_RPGTO 0x0050 -#define AR5K_RPGTO_M 0x000003ff /* [5211+] (?) */ +#define AR5K_RPGTO_M 0x000003ff /* * Receive frame count limit register @@ -241,6 +246,7 @@ /* * Misc settings register + * (reserved0-3) */ #define AR5K_MISC 0x0058 /* Register Address */ #define AR5K_MISC_DMA_OBS_M 0x000001e0 @@ -256,6 +262,7 @@ /* * QCU/DCU clock gating register (5311) + * (reserved4-5) */ #define AR5K_QCUDCU_CLKGT 0x005c /* Register Address (?) */ #define AR5K_QCUDCU_CLKGT_QCU 0x0000ffff /* Mask for QCU clock */ @@ -284,18 +291,18 @@ #define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */ #define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */ #define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */ -#define AR5K_ISR_SWI 0x00002000 /* Software interrupt (?) */ +#define AR5K_ISR_SWI 0x00002000 /* Software interrupt */ #define AR5K_ISR_RXPHY 0x00004000 /* PHY error */ -#define AR5K_ISR_RXKCM 0x00008000 +#define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */ #define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */ #define AR5K_ISR_BRSSI 0x00020000 #define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */ #define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ #define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */ -#define AR5K_ISR_MCABT 0x00100000 /* [5210] */ -#define AR5K_ISR_RXCHIRP 0x00200000 /* [5212+] */ -#define AR5K_ISR_SSERR 0x00200000 /* [5210] */ -#define AR5K_ISR_DPERR 0x00400000 /* [5210] */ +#define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ +#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */ +#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */ +#define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */ #define AR5K_ISR_TIM 0x00800000 /* [5210] */ #define AR5K_ISR_BCNMISC 0x00800000 /* [5212+] */ #define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill)*/ @@ -320,14 +327,14 @@ #define AR5K_SISR2 0x008c /* Register Address [5211+] */ #define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ -#define AR5K_SISR2_MCABT 0x00100000 -#define AR5K_SISR2_SSERR 0x00200000 -#define AR5K_SISR2_DPERR 0x00400000 +#define AR5K_SISR2_MCABT 0x00100000 /* Master Cycle Abort */ +#define AR5K_SISR2_SSERR 0x00200000 /* Signaled System Error */ +#define AR5K_SISR2_DPERR 0x00400000 /* Det par Error (?) */ #define AR5K_SISR2_TIM 0x01000000 /* [5212+] */ #define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */ -#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* [5212+] */ -#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* [5212+] */ -#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* [5212+] */ +#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */ +#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ +#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ #define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */ #define AR5K_SISR3 0x0090 /* Register Address [5211+] */ @@ -368,18 +375,18 @@ #define AR5K_IMR_TXEOL 0x00000400 /* Empty TX descriptor*/ #define AR5K_IMR_TXURN 0x00000800 /* Transmit FIFO underrun*/ #define AR5K_IMR_MIB 0x00001000 /* Update MIB counters*/ -#define AR5K_IMR_SWI 0x00002000 +#define AR5K_IMR_SWI 0x00002000 /* Software interrupt */ #define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/ -#define AR5K_IMR_RXKCM 0x00008000 +#define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */ #define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/ #define AR5K_IMR_BRSSI 0x00020000 #define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/ #define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */ #define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */ -#define AR5K_IMR_MCABT 0x00100000 /* [5210] */ -#define AR5K_IMR_RXCHIRP 0x00200000 /* [5212+]*/ -#define AR5K_IMR_SSERR 0x00200000 /* [5210] */ -#define AR5K_IMR_DPERR 0x00400000 /* [5210] */ +#define AR5K_IMR_MCABT 0x00100000 /* Master Cycle Abort [5210] */ +#define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/ +#define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */ +#define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */ #define AR5K_IMR_TIM 0x00800000 /* [5211+] */ #define AR5K_IMR_BCNMISC 0x00800000 /* [5212+] */ #define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/ @@ -405,14 +412,14 @@ #define AR5K_SIMR2 0x00ac /* Register Address [5211+] */ #define AR5K_SIMR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */ #define AR5K_SIMR2_QCU_TXURN_S 0 -#define AR5K_SIMR2_MCABT 0x00100000 -#define AR5K_SIMR2_SSERR 0x00200000 -#define AR5K_SIMR2_DPERR 0x00400000 +#define AR5K_SIMR2_MCABT 0x00100000 /* Master Cycle Abort */ +#define AR5K_SIMR2_SSERR 0x00200000 /* Signaled System Error */ +#define AR5K_SIMR2_DPERR 0x00400000 /* Det par Error (?) */ #define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */ #define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */ -#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* [5212+] */ -#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* [5212+] */ -#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* [5212+] */ +#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */ +#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */ +#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */ #define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */ #define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */ @@ -425,23 +432,69 @@ #define AR5K_SIMR4_QTRIG 0x000003ff /* Mask for QTRIG */ #define AR5K_SIMR4_QTRIG_S 0 +/* + * DMA Debug registers 0-7 + * 0xe0 - 0xfc + */ /* * Decompression mask registers [5212+] */ -#define AR5K_DCM_ADDR 0x0400 /*Decompression mask address (?)*/ -#define AR5K_DCM_DATA 0x0404 /*Decompression mask data (?)*/ +#define AR5K_DCM_ADDR 0x0400 /*Decompression mask address (index) */ +#define AR5K_DCM_DATA 0x0404 /*Decompression mask data */ + +/* + * Wake On Wireless pattern control register [5212+] + */ +#define AR5K_WOW_PCFG 0x0410 /* Register Address */ +#define AR5K_WOW_PCFG_PAT_MATCH_EN 0x00000001 /* Pattern match enable */ +#define AR5K_WOW_PCFG_LONG_FRAME_POL 0x00000002 /* Long frame policy */ +#define AR5K_WOW_PCFG_WOBMISS 0x00000004 /* Wake on bea(con) miss (?) */ +#define AR5K_WOW_PCFG_PAT_0_EN 0x00000100 /* Enable pattern 0 */ +#define AR5K_WOW_PCFG_PAT_1_EN 0x00000200 /* Enable pattern 1 */ +#define AR5K_WOW_PCFG_PAT_2_EN 0x00000400 /* Enable pattern 2 */ +#define AR5K_WOW_PCFG_PAT_3_EN 0x00000800 /* Enable pattern 3 */ +#define AR5K_WOW_PCFG_PAT_4_EN 0x00001000 /* Enable pattern 4 */ +#define AR5K_WOW_PCFG_PAT_5_EN 0x00002000 /* Enable pattern 5 */ + +/* + * Wake On Wireless pattern index register (?) [5212+] + */ +#define AR5K_WOW_PAT_IDX 0x0414 + +/* + * Wake On Wireless pattern data register [5212+] + */ +#define AR5K_WOW_PAT_DATA 0x0418 /* Register Address */ +#define AR5K_WOW_PAT_DATA_0_3_V 0x00000001 /* Pattern 0, 3 value */ +#define AR5K_WOW_PAT_DATA_1_4_V 0x00000100 /* Pattern 1, 4 value */ +#define AR5K_WOW_PAT_DATA_2_5_V 0x00010000 /* Pattern 2, 5 value */ +#define AR5K_WOW_PAT_DATA_0_3_M 0x01000000 /* Pattern 0, 3 mask */ +#define AR5K_WOW_PAT_DATA_1_4_M 0x04000000 /* Pattern 1, 4 mask */ +#define AR5K_WOW_PAT_DATA_2_5_M 0x10000000 /* Pattern 2, 5 mask */ /* * Decompression configuration registers [5212+] */ -#define AR5K_DCCFG 0x0420 +#define AR5K_DCCFG 0x0420 /* Register Address */ +#define AR5K_DCCFG_GLOBAL_EN 0x00000001 /* Enable decompression on all queues */ +#define AR5K_DCCFG_BYPASS_EN 0x00000002 /* Bypass decompression */ +#define AR5K_DCCFG_BCAST_EN 0x00000004 /* Enable decompression for bcast frames */ +#define AR5K_DCCFG_MCAST_EN 0x00000008 /* Enable decompression for mcast frames */ /* * Compression configuration registers [5212+] */ -#define AR5K_CCFG 0x0600 -#define AR5K_CCFG_CUP 0x0604 +#define AR5K_CCFG 0x0600 /* Register Address */ +#define AR5K_CCFG_WINDOW_SIZE 0x00000007 /* Compression window size */ +#define AR5K_CCFG_CPC_EN 0x00000008 /* Enable performance counters */ + +#define AR5K_CCFG_CCU 0x0604 /* Register Address */ +#define AR5K_CCFG_CCU_CUP_EN 0x00000001 /* CCU Catchup enable */ +#define AR5K_CCFG_CCU_CREDIT 0x00000002 /* CCU Credit (field) */ +#define AR5K_CCFG_CCU_CD_THRES 0x00000080 /* CCU Cyc(lic?) debt threshold (field) */ +#define AR5K_CCFG_CCU_CUP_LCNT 0x00010000 /* CCU Catchup lit(?) count */ +#define AR5K_CCFG_CCU_INIT 0x00100200 /* Initial value during reset */ /* * Compression performance counter registers [5212+] @@ -450,7 +503,7 @@ #define AR5K_CPC1 0x0614 /* Compression performance counter 1*/ #define AR5K_CPC2 0x0618 /* Compression performance counter 2 */ #define AR5K_CPC3 0x061c /* Compression performance counter 3 */ -#define AR5K_CPCORN 0x0620 /* Compression performance overrun (?) */ +#define AR5K_CPCOVF 0x0620 /* Compression performance overflow */ /* @@ -466,8 +519,6 @@ * set/clear, which contain status for all queues (we shift by 1 for each * queue). To access these registers easily we define some macros here * that are used inside HAL. For more infos check out *_tx_queue functs. - * - * TODO: Boundary checking on macros (here?) */ /* @@ -513,7 +564,6 @@ #define AR5K_QCU_RDYTIMECFG_BASE 0x0900 /* Register Address - Queue0 RDYTIMECFG */ #define AR5K_QCU_RDYTIMECFG_INTVAL 0x00ffffff /* Ready time interval mask */ #define AR5K_QCU_RDYTIMECFG_INTVAL_S 0 -#define AR5K_QCU_RDYTIMECFG_DURATION 0x00ffffff /* Ready time duration mask */ #define AR5K_QCU_RDYTIMECFG_ENABLE 0x01000000 /* Ready time enable mask */ #define AR5K_QUEUE_RDYTIMECFG(_q) AR5K_QUEUE_REG(AR5K_QCU_RDYTIMECFG_BASE, _q) @@ -534,19 +584,20 @@ */ #define AR5K_QCU_MISC_BASE 0x09c0 /* Register Address -Queue0 MISC */ #define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */ -#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ -#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ -#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated (?) */ -#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* Time gated (?) */ +#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */ +#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */ +#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated (?) */ +#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* Time gated (?) */ #define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated (?) */ #define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */ #define AR5K_QCU_MISC_CBREXP 0x00000020 /* CBR expired (normal queue) */ #define AR5K_QCU_MISC_CBREXP_BCN 0x00000040 /* CBR expired (beacon queue) */ -#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Beacons enabled */ -#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR threshold enabled (?) */ -#define AR5K_QCU_MISC_TXE 0x00000200 /* TXE reset when RDYTIME enalbed (?) */ -#define AR5K_QCU_MISC_CBR 0x00000400 /* CBR threshold reset (?) */ -#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU reset (?) */ +#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */ +#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR threshold enabled */ +#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME enalbed */ +#define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */ +#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */ +#define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */ #define AR5K_QUEUE_MISC(_q) AR5K_QUEUE_REG(AR5K_QCU_MISC_BASE, _q) @@ -555,7 +606,7 @@ */ #define AR5K_QCU_STS_BASE 0x0a00 /* Register Address - Queue0 STS */ #define AR5K_QCU_STS_FRMPENDCNT 0x00000003 /* Frames pending counter */ -#define AR5K_QCU_STS_CBREXPCNT 0x0000ff00 /* CBR expired counter (?) */ +#define AR5K_QCU_STS_CBREXPCNT 0x0000ff00 /* CBR expired counter */ #define AR5K_QUEUE_STATUS(_q) AR5K_QUEUE_REG(AR5K_QCU_STS_BASE, _q) /* @@ -569,9 +620,11 @@ */ #define AR5K_QCU_CBB_SELECT 0x0b00 #define AR5K_QCU_CBB_ADDR 0x0b04 +#define AR5K_QCU_CBB_ADDR_S 9 /* * QCU compression buffer configuration register [5212+] + * (buffer size) */ #define AR5K_QCU_CBCFG 0x0b08 @@ -652,80 +705,100 @@ * No lockout means there is no special handling. */ #define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */ -#define AR5K_DCU_MISC_BACKOFF 0x000007ff /* Mask for backoff setting (?) */ +#define AR5K_DCU_MISC_BACKOFF 0x000007ff /* Mask for backoff threshold */ #define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */ -#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll (?) */ -#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff (?) */ -#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch (?) */ +#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */ +#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */ +#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */ #define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */ -#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 -#define AR5K_DCU_MISC_VIRTCOL_MODIFIED 1 -#define AR5K_DCU_MISC_VIRTCOL_IGNORE 2 -#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Beacon enable (?) */ +#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0 +#define AR5K_DCU_MISC_VIRTCOL_MODIFIED 1 +#define AR5K_DCU_MISC_VIRTCOL_IGNORE 2 +#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */ #define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */ #define AR5K_DCU_MISC_ARBLOCK_CTL_S 17 -#define AR5K_DCU_MISC_ARBLOCK_CTL_NONE 0 /* No arbiter lockout */ +#define AR5K_DCU_MISC_ARBLOCK_CTL_NONE 0 /* No arbiter lockout */ #define AR5K_DCU_MISC_ARBLOCK_CTL_INTFRM 1 /* Intra-frame lockout */ #define AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL 2 /* Global lockout */ -#define AR5K_DCU_MISC_ARBLOCK_IGNORE 0x00080000 -#define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Disable sequence number increment (?) */ -#define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Disable post-frame backoff (?) */ -#define AR5K_DCU_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual Collision policy (?) */ -#define AR5K_DCU_MISC_BLOWN_IFS_POLICY 0x00800000 +#define AR5K_DCU_MISC_ARBLOCK_IGNORE 0x00080000 /* Ignore Arbiter lockout */ +#define AR5K_DCU_MISC_SEQ_NUM_INCR_DIS 0x00100000 /* Disable sequence number increment */ +#define AR5K_DCU_MISC_POST_FR_BKOFF_DIS 0x00200000 /* Disable post-frame backoff */ +#define AR5K_DCU_MISC_VIRT_COLL_POLICY 0x00400000 /* Virtual Collision cw policy */ +#define AR5K_DCU_MISC_BLOWN_IFS_POLICY 0x00800000 /* Blown IFS policy (?) */ #define AR5K_DCU_MISC_SEQNUM_CTL 0x01000000 /* Sequence number control (?) */ #define AR5K_QUEUE_DFS_MISC(_q) AR5K_QUEUE_REG(AR5K_DCU_MISC_BASE, _q) /* * DCU frame sequence number registers */ -#define AR5K_DCU_SEQNUM_BASE 0x1140 -#define AR5K_DCU_SEQNUM_M 0x00000fff +#define AR5K_DCU_SEQNUM_BASE 0x1140 +#define AR5K_DCU_SEQNUM_M 0x00000fff #define AR5K_QUEUE_DFS_SEQNUM(_q) AR5K_QUEUE_REG(AR5K_DCU_SEQNUM_BASE, _q) /* - * DCU global IFS SIFS registers + * DCU global IFS SIFS register */ #define AR5K_DCU_GBL_IFS_SIFS 0x1030 #define AR5K_DCU_GBL_IFS_SIFS_M 0x0000ffff /* - * DCU global IFS slot interval registers + * DCU global IFS slot interval register */ #define AR5K_DCU_GBL_IFS_SLOT 0x1070 #define AR5K_DCU_GBL_IFS_SLOT_M 0x0000ffff /* - * DCU global IFS EIFS registers + * DCU global IFS EIFS register */ #define AR5K_DCU_GBL_IFS_EIFS 0x10b0 #define AR5K_DCU_GBL_IFS_EIFS_M 0x0000ffff /* - * DCU global IFS misc registers + * DCU global IFS misc register + * + * LFSR stands for Linear Feedback Shift Register + * and it's used for generating pseudo-random + * number sequences. + * + * (If i understand corectly, random numbers are + * used for idle sensing -multiplied with cwmin/max etc-) */ #define AR5K_DCU_GBL_IFS_MISC 0x10f0 /* Register Address */ -#define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 -#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode (?) */ -#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask (?) */ -#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 -#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 +#define AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE 0x00000007 /* LFSR Slice Select */ +#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */ +#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */ +#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */ +#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */ +#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFC cnt reset policy (?) */ +#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */ +#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */ /* * DCU frame prefetch control register */ -#define AR5K_DCU_FP 0x1230 +#define AR5K_DCU_FP 0x1230 /* Register Address */ +#define AR5K_DCU_FP_NOBURST_DCU_EN 0x00000001 /* Enable non-burst prefetch on DCU (?) */ +#define AR5K_DCU_FP_NOBURST_EN 0x00000010 /* Enable non-burst prefetch (?) */ +#define AR5K_DCU_FP_BURST_DCU_EN 0x00000020 /* Enable burst prefetch on DCU (?) */ /* * DCU transmit pause control/status register */ #define AR5K_DCU_TXP 0x1270 /* Register Address */ -#define AR5K_DCU_TXP_M 0x000003ff /* Tx pause mask (?) */ -#define AR5K_DCU_TXP_STATUS 0x00010000 /* Tx pause status (?) */ +#define AR5K_DCU_TXP_M 0x000003ff /* Tx pause mask */ +#define AR5K_DCU_TXP_STATUS 0x00010000 /* Tx pause status */ + +/* + * DCU transmit filter table 0 (32 entries) + */ +#define AR5K_DCU_TX_FILTER_0_BASE 0x1038 +#define AR5K_DCU_TX_FILTER_0(_n) (AR5K_DCU_TX_FILTER_0_BASE + (_n * 64)) /* - * DCU transmit filter register + * DCU transmit filter table 1 (16 entries) */ -#define AR5K_DCU_TX_FILTER 0x1038 +#define AR5K_DCU_TX_FILTER_1_BASE 0x103c +#define AR5K_DCU_TX_FILTER_1(_n) (AR5K_DCU_TX_FILTER_1_BASE + ((_n - 32) * 64)) /* * DCU clear transmit filter register @@ -739,9 +812,6 @@ /* * Reset control register - * - * 4 and 8 are not used in 5211/5212 and - * 2 means "baseband reset" on 5211/5212. */ #define AR5K_RESET_CTL 0x4000 /* Register Address */ #define AR5K_RESET_CTL_PCU 0x00000001 /* Protocol Control Unit reset */ @@ -765,6 +835,7 @@ #define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */ #define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 #define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */ +/* more bits */ /* * Interrupt pending register @@ -776,13 +847,14 @@ * Sleep force register */ #define AR5K_SFR 0x400c -#define AR5K_SFR_M 0x00000001 +#define AR5K_SFR_EN 0x00000001 /* * PCI configuration register */ #define AR5K_PCICFG 0x4010 /* Register Address */ #define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */ +#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock (?) */ #define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */ #define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */ #define AR5K_PCICFG_EESIZE_S 3 @@ -798,19 +870,21 @@ #define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix (?) */ #define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep (?) */ #define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */ -#define AR5K_PCICFG_SL_INPEN 0x00002800 /* Sleep even whith pending interrupts (?) */ +#define AR5K_PCICFG_UNK 0x00001000 /* Passed on some parts durring attach (?) */ +#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts (?) */ #define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */ #define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */ #define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */ #define AR5K_PCICFG_LEDMODE_PROM 0x00020000 /* Default mode (blink on any traffic) [5211+] */ #define AR5K_PCICFG_LEDMODE_PWR 0x00040000 /* Some other blinking mode (?) [5211+] */ #define AR5K_PCICFG_LEDMODE_RAND 0x00060000 /* Random blinking (?) [5211+] */ -#define AR5K_PCICFG_LEDBLINK 0x00700000 +#define AR5K_PCICFG_LEDBLINK 0x00700000 /* Led blink rate */ #define AR5K_PCICFG_LEDBLINK_S 20 -#define AR5K_PCICFG_LEDSLOW 0x00800000 /* Slow led blink rate (?) [5211+] */ +#define AR5K_PCICFG_LEDSLOW 0x00800000 /* Slowest led blink rate [5211+] */ #define AR5K_PCICFG_LEDSTATE \ (AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \ AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW) +#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate (field) */ /* * "General Purpose Input/Output" (GPIO) control register @@ -947,7 +1021,7 @@ #define AR5K_EEPROM_VERSION_4_4 0x4004 #define AR5K_EEPROM_VERSION_4_5 0x4005 #define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ -#define AR5K_EEPROM_VERSION_4_7 0x3007 +#define AR5K_EEPROM_VERSION_4_7 0x4007 #define AR5K_EEPROM_MODE_11A 0 #define AR5K_EEPROM_MODE_11B 1 @@ -1023,10 +1097,14 @@ #define AR5K_EEPROM_STAT_WRDONE 0x00000008 /* EEPROM write successful */ /* - * EEPROM config register (?) + * EEPROM config register */ -#define AR5K_EEPROM_CFG 0x6010 - +#define AR5K_EEPROM_CFG 0x6010 /* Register Addres */ +#define AR5K_EEPROM_CFG_SIZE_OVR 0x00000001 +#define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */ +#define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */ +#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protectio key */ +#define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */ /* @@ -1050,7 +1128,7 @@ #define AR5K_STA_ID1 0x8004 /* Register Address */ #define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */ #define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */ -#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting (?) */ +#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */ #define AR5K_STA_ID1_NO_KEYSRCH 0x00080000 /* No key search */ #define AR5K_STA_ID1_NO_PSPOLL 0x00100000 /* No power save polling [5210] */ #define AR5K_STA_ID1_PCF_5211 0x00100000 /* Enable PCF on [5211+] */ @@ -1059,9 +1137,13 @@ AR5K_STA_ID1_PCF_5210 : AR5K_STA_ID1_PCF_5211) #define AR5K_STA_ID1_DEFAULT_ANTENNA 0x00200000 /* Use default antenna */ #define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */ -#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS (?) */ -#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS (?) */ +#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */ +#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS */ #define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate (for ACK/CTS ?) [5211+] */ +#define AR5K_STA_ID1_SELF_GEN_SECTORE 0x04000000 /* Self generate sectore (?) */ +#define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */ +#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Keysearch mode (?) */ +#define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */ /* * First BSSID register (MAC address, lower 32bits) @@ -1117,7 +1199,7 @@ * * Retry limit register for 5210 (no QCU/DCU so it's done in PCU) */ -#define AR5K_NODCU_RETRY_LMT 0x801c /*Register Address */ +#define AR5K_NODCU_RETRY_LMT 0x801c /* Register Address */ #define AR5K_NODCU_RETRY_LMT_SH_RETRY 0x0000000f /* Short retry limit mask */ #define AR5K_NODCU_RETRY_LMT_SH_RETRY_S 0 #define AR5K_NODCU_RETRY_LMT_LG_RETRY 0x000000f0 /* Long retry mask */ @@ -1136,9 +1218,9 @@ #define AR5K_USEC_5211 0x801c /* Register Address [5211+] */ #define AR5K_USEC (ah->ah_version == AR5K_AR5210 ? \ AR5K_USEC_5210 : AR5K_USEC_5211) -#define AR5K_USEC_1 0x0000007f +#define AR5K_USEC_1 0x0000007f /* clock cycles for 1us */ #define AR5K_USEC_1_S 0 -#define AR5K_USEC_32 0x00003f80 +#define AR5K_USEC_32 0x00003f80 /* clock cycles for 1us while on 32Mhz clock */ #define AR5K_USEC_32_S 7 #define AR5K_USEC_TX_LATENCY_5211 0x007fc000 #define AR5K_USEC_TX_LATENCY_5211_S 14 @@ -1152,16 +1234,16 @@ /* * PCU beacon control register */ -#define AR5K_BEACON_5210 0x8024 -#define AR5K_BEACON_5211 0x8020 +#define AR5K_BEACON_5210 0x8024 /*Register Address [5210] */ +#define AR5K_BEACON_5211 0x8020 /*Register Address [5211+] */ #define AR5K_BEACON (ah->ah_version == AR5K_AR5210 ? \ AR5K_BEACON_5210 : AR5K_BEACON_5211) -#define AR5K_BEACON_PERIOD 0x0000ffff +#define AR5K_BEACON_PERIOD 0x0000ffff /* Mask for beacon period */ #define AR5K_BEACON_PERIOD_S 0 -#define AR5K_BEACON_TIM 0x007f0000 +#define AR5K_BEACON_TIM 0x007f0000 /* Mask for TIM offset */ #define AR5K_BEACON_TIM_S 16 -#define AR5K_BEACON_ENABLE 0x00800000 -#define AR5K_BEACON_RESET_TSF 0x01000000 +#define AR5K_BEACON_ENABLE 0x00800000 /* Enable beacons */ +#define AR5K_BEACON_RESET_TSF 0x01000000 /* Force TSF reset */ /* * CFP period register @@ -1234,7 +1316,6 @@ /* * Receive filter register - * TODO: Get these out of ar5xxx.h on ath5k */ #define AR5K_RX_FILTER_5210 0x804c /* Register Address [5210] */ #define AR5K_RX_FILTER_5211 0x803c /* Register Address [5211+] */ @@ -1307,11 +1388,11 @@ #define AR5K_DIAG_SW_5211 0x8048 /* Register Address [5211+] */ #define AR5K_DIAG_SW (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_5210 : AR5K_DIAG_SW_5211) -#define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 -#define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs (?) */ -#define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs (?) */ -#define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable encryption (?) */ -#define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable decryption (?) */ +#define AR5K_DIAG_SW_DIS_WEP_ACK 0x00000001 /* Disable ACKs if WEP key is invalid */ +#define AR5K_DIAG_SW_DIS_ACK 0x00000002 /* Disable ACKs */ +#define AR5K_DIAG_SW_DIS_CTS 0x00000004 /* Disable CTSs */ +#define AR5K_DIAG_SW_DIS_ENC 0x00000008 /* Disable encryption */ +#define AR5K_DIAG_SW_DIS_DEC 0x00000010 /* Disable decryption */ #define AR5K_DIAG_SW_DIS_TX 0x00000020 /* Disable transmit [5210] */ #define AR5K_DIAG_SW_DIS_RX_5210 0x00000040 /* Disable recieve */ #define AR5K_DIAG_SW_DIS_RX_5211 0x00000020 @@ -1329,13 +1410,13 @@ #define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100 #define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211) -#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 /* Scrambler seed (?) */ +#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 /* Enable scrambler seed */ #define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 #define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \ AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211) #define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */ #define AR5K_DIAG_SW_SCVRAM_SEED 0x0003f800 /* [5210] */ -#define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask (?) */ +#define AR5K_DIAG_SW_SCRAM_SEED_M 0x0001fc00 /* Scrambler seed mask */ #define AR5K_DIAG_SW_SCRAM_SEED_S 10 #define AR5K_DIAG_SW_DIS_SEQ_INC 0x00040000 /* Disable seqnum increment (?)[5210] */ #define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000 @@ -1344,6 +1425,7 @@ AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211) #define AR5K_DIAG_SW_OBSPT_M 0x000c0000 #define AR5K_DIAG_SW_OBSPT_S 18 +/* more bits */ /* * TSF (clock) register (lower 32 bits) @@ -1369,15 +1451,34 @@ /* * ADDAC test register [5211+] */ -#define AR5K_ADDAC_TEST 0x8054 -#define AR5K_ADDAC_TEST_TXCONT 0x00000001 +#define AR5K_ADDAC_TEST 0x8054 /* Register Address */ +#define AR5K_ADDAC_TEST_TXCONT 0x00000001 /* Test continuous tx */ +#define AR5K_ADDAC_TEST_TST_MODE 0x00000002 /* Test mode */ +#define AR5K_ADDAC_TEST_LOOP_EN 0x00000004 /* Enable loop */ +#define AR5K_ADDAC_TEST_LOOP_LEN 0x00000008 /* Loop length (field) */ +#define AR5K_ADDAC_TEST_USE_U8 0x00004000 /* Use upper 8 bits */ +#define AR5K_ADDAC_TEST_MSB 0x00008000 /* State of MSB */ +#define AR5K_ADDAC_TEST_TRIG_SEL 0x00010000 /* Trigger select */ +#define AR5K_ADDAC_TEST_TRIG_PTY 0x00020000 /* Trigger polarity */ +#define AR5K_ADDAC_TEST_RXCONT 0x00040000 /* Continuous capture */ +#define AR5K_ADDAC_TEST_CAPTURE 0x00080000 /* Begin capture */ +#define AR5K_ADDAC_TEST_TST_ARM 0x00100000 /* Test ARM (Adaptive Radio Mode ?) */ /* * Default antenna register [5211+] */ #define AR5K_DEFAULT_ANTENNA 0x8058 +/* + * Frame control QoS mask register (?) [5211+] + * (FC_QOS_MASK) + */ +#define AR5K_FRAME_CTL_QOSM 0x805c +/* + * Seq mask register (?) [5211+] + */ +#define AR5K_SEQ_MASK 0x8060 /* * Retry count register [5210] @@ -1449,124 +1550,242 @@ /* * XR (eXtended Range) mode register */ -#define AR5K_XRMODE 0x80c0 -#define AR5K_XRMODE_POLL_TYPE_M 0x0000003f +#define AR5K_XRMODE 0x80c0 /* Register Address */ +#define AR5K_XRMODE_POLL_TYPE_M 0x0000003f /* Mask for Poll type (?) */ #define AR5K_XRMODE_POLL_TYPE_S 0 -#define AR5K_XRMODE_POLL_SUBTYPE_M 0x0000003c +#define AR5K_XRMODE_POLL_SUBTYPE_M 0x0000003c /* Mask for Poll subtype (?) */ #define AR5K_XRMODE_POLL_SUBTYPE_S 2 -#define AR5K_XRMODE_POLL_WAIT_ALL 0x00000080 -#define AR5K_XRMODE_SIFS_DELAY 0x000fff00 -#define AR5K_XRMODE_FRAME_HOLD_M 0xfff00000 +#define AR5K_XRMODE_POLL_WAIT_ALL 0x00000080 /* Wait for poll */ +#define AR5K_XRMODE_SIFS_DELAY 0x000fff00 /* Mask for SIFS delay */ +#define AR5K_XRMODE_FRAME_HOLD_M 0xfff00000 /* Mask for frame hold (?) */ #define AR5K_XRMODE_FRAME_HOLD_S 20 /* * XR delay register */ -#define AR5K_XRDELAY 0x80c4 -#define AR5K_XRDELAY_SLOT_DELAY_M 0x0000ffff +#define AR5K_XRDELAY 0x80c4 /* Register Address */ +#define AR5K_XRDELAY_SLOT_DELAY_M 0x0000ffff /* Mask for slot delay */ #define AR5K_XRDELAY_SLOT_DELAY_S 0 -#define AR5K_XRDELAY_CHIRP_DELAY_M 0xffff0000 +#define AR5K_XRDELAY_CHIRP_DELAY_M 0xffff0000 /* Mask for CHIRP data delay */ #define AR5K_XRDELAY_CHIRP_DELAY_S 16 /* * XR timeout register */ -#define AR5K_XRTIMEOUT 0x80c8 -#define AR5K_XRTIMEOUT_CHIRP_M 0x0000ffff +#define AR5K_XRTIMEOUT 0x80c8 /* Register Address */ +#define AR5K_XRTIMEOUT_CHIRP_M 0x0000ffff /* Mask for CHIRP timeout */ #define AR5K_XRTIMEOUT_CHIRP_S 0 -#define AR5K_XRTIMEOUT_POLL_M 0xffff0000 +#define AR5K_XRTIMEOUT_POLL_M 0xffff0000 /* Mask for Poll timeout */ #define AR5K_XRTIMEOUT_POLL_S 16 /* * XR chirp register */ -#define AR5K_XRCHIRP 0x80cc -#define AR5K_XRCHIRP_SEND 0x00000001 -#define AR5K_XRCHIRP_GAP 0xffff0000 +#define AR5K_XRCHIRP 0x80cc /* Register Address */ +#define AR5K_XRCHIRP_SEND 0x00000001 /* Send CHIRP */ +#define AR5K_XRCHIRP_GAP 0xffff0000 /* Mask for CHIRP gap (?) */ /* * XR stomp register */ -#define AR5K_XRSTOMP 0x80d0 -#define AR5K_XRSTOMP_TX 0x00000001 -#define AR5K_XRSTOMP_RX_ABORT 0x00000002 -#define AR5K_XRSTOMP_RSSI_THRES 0x0000ff00 +#define AR5K_XRSTOMP 0x80d0 /* Register Address */ +#define AR5K_XRSTOMP_TX 0x00000001 /* Stomp Tx (?) */ +#define AR5K_XRSTOMP_RX 0x00000002 /* Stomp Rx (?) */ +#define AR5K_XRSTOMP_TX_RSSI 0x00000004 /* Stomp Tx RSSI (?) */ +#define AR5K_XRSTOMP_TX_BSSID 0x00000008 /* Stomp Tx BSSID (?) */ +#define AR5K_XRSTOMP_DATA 0x00000010 /* Stomp data (?)*/ +#define AR5K_XRSTOMP_RSSI_THRES 0x0000ff00 /* Mask for XR RSSI threshold */ /* * First enhanced sleep register */ -#define AR5K_SLEEP0 0x80d4 -#define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff +#define AR5K_SLEEP0 0x80d4 /* Register Address */ +#define AR5K_SLEEP0_NEXT_DTIM 0x0007ffff /* Mask for next DTIM (?) */ #define AR5K_SLEEP0_NEXT_DTIM_S 0 -#define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 -#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 -#define AR5K_SLEEP0_CABTO 0xff000000 +#define AR5K_SLEEP0_ASSUME_DTIM 0x00080000 /* Assume DTIM */ +#define AR5K_SLEEP0_ENH_SLEEP_EN 0x00100000 /* Enable enchanced sleep control */ +#define AR5K_SLEEP0_CABTO 0xff000000 /* Mask for CAB Time Out */ #define AR5K_SLEEP0_CABTO_S 24 /* * Second enhanced sleep register */ -#define AR5K_SLEEP1 0x80d8 -#define AR5K_SLEEP1_NEXT_TIM 0x0007ffff +#define AR5K_SLEEP1 0x80d8 /* Register Address */ +#define AR5K_SLEEP1_NEXT_TIM 0x0007ffff /* Mask for next TIM (?) */ #define AR5K_SLEEP1_NEXT_TIM_S 0 -#define AR5K_SLEEP1_BEACON_TO 0xff000000 +#define AR5K_SLEEP1_BEACON_TO 0xff000000 /* Mask for Beacon Time Out */ #define AR5K_SLEEP1_BEACON_TO_S 24 /* * Third enhanced sleep register */ -#define AR5K_SLEEP2 0x80dc -#define AR5K_SLEEP2_TIM_PER 0x0000ffff +#define AR5K_SLEEP2 0x80dc /* Register Address */ +#define AR5K_SLEEP2_TIM_PER 0x0000ffff /* Mask for TIM period (?) */ #define AR5K_SLEEP2_TIM_PER_S 0 -#define AR5K_SLEEP2_DTIM_PER 0xffff0000 +#define AR5K_SLEEP2_DTIM_PER 0xffff0000 /* Mask for DTIM period (?) */ #define AR5K_SLEEP2_DTIM_PER_S 16 /* * BSSID mask registers */ -#define AR5K_BSS_IDM0 0x80e0 -#define AR5K_BSS_IDM1 0x80e4 +#define AR5K_BSS_IDM0 0x80e0 /* Upper bits */ +#define AR5K_BSS_IDM1 0x80e4 /* Lower bits */ /* * TX power control (TPC) register + * + * XXX: PCDAC steps (0.5dbm) or DBM ? + * + * XXX: Mask changes for newer chips to 7f + * like tx power table ? */ -#define AR5K_TXPC 0x80e8 -#define AR5K_TXPC_ACK_M 0x0000003f +#define AR5K_TXPC 0x80e8 /* Register Address */ +#define AR5K_TXPC_ACK_M 0x0000003f /* Mask for ACK tx power */ #define AR5K_TXPC_ACK_S 0 -#define AR5K_TXPC_CTS_M 0x00003f00 +#define AR5K_TXPC_CTS_M 0x00003f00 /* Mask for CTS tx power */ #define AR5K_TXPC_CTS_S 8 -#define AR5K_TXPC_CHIRP_M 0x003f0000 +#define AR5K_TXPC_CHIRP_M 0x003f0000 /* Mask for CHIRP tx power */ #define AR5K_TXPC_CHIRP_S 22 /* * Profile count registers */ -#define AR5K_PROFCNT_TX 0x80ec -#define AR5K_PROFCNT_RX 0x80f0 -#define AR5K_PROFCNT_RXCLR 0x80f4 -#define AR5K_PROFCNT_CYCLE 0x80f8 +#define AR5K_PROFCNT_TX 0x80ec /* Tx count */ +#define AR5K_PROFCNT_RX 0x80f0 /* Rx count */ +#define AR5K_PROFCNT_RXCLR 0x80f4 /* Clear Rx count */ +#define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle count (?) */ + +/* + * Quiet (period) control registers (?) + */ +#define AR5K_QUIET_CTL1 0x80fc /* Register Address */ +#define AR5K_QUIET_CTL1_NEXT_QT 0x0000ffff /* Mask for next quiet (period?) (?) */ +#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet (period?) */ +#define AR5K_QUIET_CTL2 0x8100 /* Register Address */ +#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period (?) */ +#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet duration (?) */ /* * TSF parameter register */ -#define AR5K_TSF_PARM 0x8104 -#define AR5K_TSF_PARM_INC_M 0x000000ff +#define AR5K_TSF_PARM 0x8104 /* Register Address */ +#define AR5K_TSF_PARM_INC_M 0x000000ff /* Mask for TSF increment */ #define AR5K_TSF_PARM_INC_S 0 +/* + * QoS register (?) + */ +#define AR5K_QOS 0x8108 /* Register Address */ +#define AR5K_QOS_NOACK_2BIT_VALUES 0x00000000 /* (field) */ +#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000020 /* (field) */ +#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000080 /* (field) */ + /* * PHY error filter register */ #define AR5K_PHY_ERR_FIL 0x810c -#define AR5K_PHY_ERR_FIL_RADAR 0x00000020 -#define AR5K_PHY_ERR_FIL_OFDM 0x00020000 -#define AR5K_PHY_ERR_FIL_CCK 0x02000000 +#define AR5K_PHY_ERR_FIL_RADAR 0x00000020 /* Radar signal */ +#define AR5K_PHY_ERR_FIL_OFDM 0x00020000 /* OFDM false detect (ANI) */ +#define AR5K_PHY_ERR_FIL_CCK 0x02000000 /* CCK false detect (ANI) */ + +/* + * XR latency register + */ +#define AR5K_XRLAT_TX 0x8110 /* - * Rate duration register + * ACK SIFS register + */ +#define AR5K_ACKSIFS 0x8114 /* Register Address */ +#define AR5K_ACKSIFS_INC 0x00000000 /* ACK SIFS Increment (field) */ + +/* + * MIC QoS control register (?) + */ +#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */ +#define AR5K_MIC_QOS_CTL_0 0x00000001 /* MIC QoS control 0 (?) */ +#define AR5K_MIC_QOS_CTL_1 0x00000004 /* MIC QoS control 1 (?) */ +#define AR5K_MIC_QOS_CTL_2 0x00000010 /* MIC QoS control 2 (?) */ +#define AR5K_MIC_QOS_CTL_3 0x00000040 /* MIC QoS control 3 (?) */ +#define AR5K_MIC_QOS_CTL_4 0x00000100 /* MIC QoS control 4 (?) */ +#define AR5K_MIC_QOS_CTL_5 0x00000400 /* MIC QoS control 5 (?) */ +#define AR5K_MIC_QOS_CTL_6 0x00001000 /* MIC QoS control 6 (?) */ +#define AR5K_MIC_QOS_CTL_7 0x00004000 /* MIC QoS control 7 (?) */ +#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */ + +/* + * MIC QoS select register (?) + */ +#define AR5K_MIC_QOS_SEL 0x811c +#define AR5K_MIC_QOS_SEL_0 0x00000001 +#define AR5K_MIC_QOS_SEL_1 0x00000010 +#define AR5K_MIC_QOS_SEL_2 0x00000100 +#define AR5K_MIC_QOS_SEL_3 0x00001000 +#define AR5K_MIC_QOS_SEL_4 0x00010000 +#define AR5K_MIC_QOS_SEL_5 0x00100000 +#define AR5K_MIC_QOS_SEL_6 0x01000000 +#define AR5K_MIC_QOS_SEL_7 0x10000000 + +/* + * Misc mode control register (?) + */ +#define AR5K_MISC_MODE 0x8120 /* Register Address */ +#define AR5K_MISC_MODE_FBSSID_MATCH 0x00000001 /* Force BSSID match */ +#define AR5K_MISC_MODE_ACKSIFS_MEM 0x00000002 /* ACK SIFS memory (?) */ +/* more bits */ + +/* + * OFDM Filter counter + */ +#define AR5K_OFDM_FIL_CNT 0x8124 + +/* + * CCK Filter counter + */ +#define AR5K_CCK_FIL_CNT 0x8128 + +/* + * PHY Error Counters (?) + */ +#define AR5K_PHYERR_CNT1 0x812c +#define AR5K_PHYERR_CNT1_MASK 0x8130 + +#define AR5K_PHYERR_CNT2 0x8134 +#define AR5K_PHYERR_CNT2_MASK 0x8138 + +/* + * TSF Threshold register (?) + */ +#define AR5K_TSF_THRES 0x813c + +/* + * Rate -> ACK SIFS mapping table (32 entries) + */ +#define AR5K_RATE_ACKSIFS_BASE 0x8680 /* Register Address */ +#define AR5K_RATE_ACKSIFS(_n) (AR5K_RATE_ACKSIFS_BSE + ((_n) << 2)) +#define AR5K_RATE_ACKSIFS_NORMAL 0x00000001 /* Normal SIFS (field) */ +#define AR5K_RATE_ACKSIFS_TURBO 0x00000400 /* Turbo SIFS (field) */ + +/* + * Rate -> duration mapping table (32 entries) */ #define AR5K_RATE_DUR_BASE 0x8700 #define AR5K_RATE_DUR(_n) (AR5K_RATE_DUR_BASE + ((_n) << 2)) +/* + * Rate -> db mapping table + * (8 entries, each one has 4 8bit fields) + */ +#define AR5K_RATE2DB_BASE 0x87c0 +#define AR5K_RATE2DB(_n) (AR5K_RATE2DB_BASE + ((_n) << 2)) + +/* + * db -> Rate mapping table + * (8 entries, each one has 4 8bit fields) + */ +#define AR5K_DB2RATE_BASE 0x87e0 +#define AR5K_DB2RATE(_n) (AR5K_DB2RATE_BASE + ((_n) << 2)) + /*===5212 end===*/ /* @@ -1613,12 +1832,34 @@ /*===PHY REGISTERS===*/ /* - * PHY register + * PHY registers start */ #define AR5K_PHY_BASE 0x9800 #define AR5K_PHY(_n) (AR5K_PHY_BASE + ((_n) << 2)) -#define AR5K_PHY_SHIFT_2GHZ 0x00004007 -#define AR5K_PHY_SHIFT_5GHZ 0x00000007 + +/* + * TST_2 (Misc config parameters) + */ +#define AR5K_PHY_TST2 0x9800 /* Register Address */ +#define AR5K_PHY_TST2_TRIG_SEL 0x00000001 /* Trigger select (?) (field ?) */ +#define AR5K_PHY_TST2_TRIG 0x00000010 /* Trigger (?) (field ?) */ +#define AR5K_PHY_TST2_CBUS_MODE 0x00000100 /* Cardbus mode (?) */ +/* bit reserved */ +#define AR5K_PHY_TST2_CLK32 0x00000400 /* CLK_OUT is CLK32 (32Khz external) */ +#define AR5K_PHY_TST2_CHANCOR_DUMP_EN 0x00000800 /* Enable Chancor dump (?) */ +#define AR5K_PHY_TST2_EVEN_CHANCOR_DUMP 0x00001000 /* Even Chancor dump (?) */ +#define AR5K_PHY_TST2_RFSILENT_EN 0x00002000 /* Enable RFSILENT */ +#define AR5K_PHY_TST2_ALT_RFDATA 0x00004000 /* Alternate RFDATA (5-2GHz switch) */ +#define AR5K_PHY_TST2_MINI_OBS_EN 0x00008000 /* Enable mini OBS (?) */ +#define AR5K_PHY_TST2_RX2_IS_RX5_INV 0x00010000 /* 2GHz rx path is the 5GHz path inverted (?) */ +#define AR5K_PHY_TST2_SLOW_CLK160 0x00020000 /* Slow CLK160 (?) */ +#define AR5K_PHY_TST2_AGC_OBS_SEL_3 0x00040000 /* AGC OBS Select 3 (?) */ +#define AR5K_PHY_TST2_BBB_OBS_SEL 0x00080000 /* BB OBS Select (field ?) */ +#define AR5K_PHY_TST2_ADC_OBS_SEL 0x00800000 /* ADC OBS Select (field ?) */ +#define AR5K_PHY_TST2_RX_CLR_SEL 0x08000000 /* RX Clear Select (?) */ +#define AR5K_PHY_TST2_FORCE_AGC_CLR 0x10000000 /* Force AGC clear (?) */ +#define AR5K_PHY_SHIFT_2GHZ 0x00004007 /* Used to access 2GHz radios */ +#define AR5K_PHY_SHIFT_5GHZ 0x00000007 /* Used to access 5GHz radios (default) */ /* * PHY frame control register [5110] /turbo mode register [5111+] @@ -1630,18 +1871,21 @@ * a "turbo mode register" for 5110. We treat this one as * a frame control register for 5110 below. */ -#define AR5K_PHY_TURBO 0x9804 -#define AR5K_PHY_TURBO_MODE 0x00000001 -#define AR5K_PHY_TURBO_SHORT 0x00000002 +#define AR5K_PHY_TURBO 0x9804 /* Register Address */ +#define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */ +#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Short mode (20Mhz channels) (?) */ /* * PHY agility command register + * (aka TST_1) */ -#define AR5K_PHY_AGC 0x9808 -#define AR5K_PHY_AGC_DISABLE 0x08000000 +#define AR5K_PHY_AGC 0x9808 /* Register Address */ +#define AR5K_PHY_TST1 0x9808 +#define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/ +#define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */ /* - * PHY timing register [5112+] + * PHY timing register 3 [5112+] */ #define AR5K_PHY_TIMING_3 0x9814 #define AR5K_PHY_TIMING_3_DSC_MAN 0xfffe0000 @@ -1657,26 +1901,81 @@ /* * PHY activation register */ -#define AR5K_PHY_ACT 0x981c -#define AR5K_PHY_ACT_ENABLE 0x00000001 -#define AR5K_PHY_ACT_DISABLE 0x00000002 +#define AR5K_PHY_ACT 0x981c /* Register Address */ +#define AR5K_PHY_ACT_ENABLE 0x00000001 /* Activate PHY */ +#define AR5K_PHY_ACT_DISABLE 0x00000002 /* Deactivate PHY */ + +/* + * PHY RF control registers + * (i think these are delay times, + * these calibration values exist + * in EEPROM) + */ +#define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */ +#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* Mask for TX frame to TX d(esc?) start */ + +#define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */ +#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000000f /* Mask for TX end to XLNA on */ + +#define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */ +#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */ +#define AR5K_PHY_RF_CTL4_TXF2XPA_B_ON 0x00000100 /* TX frame to XPA B on (field) */ +#define AR5K_PHY_RF_CTL4_TXE2XPA_A_OFF 0x00010000 /* TX end to XPA A off (field) */ +#define AR5K_PHY_RF_CTL4_TXE2XPA_B_OFF 0x01000000 /* TX end to XPA B off (field) */ + +/* + * Pre-Amplifier control register + * (XPA -> external pre-amplifier) + */ +#define AR5K_PHY_PA_CTL 0x9838 /* Register Address */ +#define AR5K_PHY_PA_CTL_XPA_A_HI 0x00000001 /* XPA A high (?) */ +#define AR5K_PHY_PA_CTL_XPA_B_HI 0x00000002 /* XPA B high (?) */ +#define AR5K_PHY_PA_CTL_XPA_A_EN 0x00000004 /* Enable XPA A */ +#define AR5K_PHY_PA_CTL_XPA_B_EN 0x00000008 /* Enable XPA B */ + +/* + * PHY settling register + */ +#define AR5K_PHY_SETTLING 0x9844 /* Register Address */ +#define AR5K_PHY_SETTLING_AGC 0x0000007f /* Mask for AGC settling time */ +#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Mask for Switch settlig time */ + +/* + * PHY Gain registers + */ +#define AR5K_PHY_GAIN 0x9848 /* Register Address */ +#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* Mask for TX-RX Attenuation */ + +#define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */ +#define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */ + +/* + * Desired size register + * (for more infos read ANI patent) + */ +#define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */ +#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* Mask for ADC desired size */ +#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* Mask for PGA desired size */ +#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Mask for Total desired size (?) */ /* * PHY signal register + * (for more infos read ANI patent) */ -#define AR5K_PHY_SIG 0x9858 -#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 +#define AR5K_PHY_SIG 0x9858 /* Register Address */ +#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* Mask for FIRSTEP */ #define AR5K_PHY_SIG_FIRSTEP_S 12 -#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 +#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* Mask for FIPWR */ #define AR5K_PHY_SIG_FIRPWR_S 18 /* * PHY coarse agility control register + * (for more infos read ANI patent) */ -#define AR5K_PHY_AGCCOARSE 0x985c -#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 +#define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */ +#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* Mask for AGC Coarse low */ #define AR5K_PHY_AGCCOARSE_LO_S 7 -#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 +#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* Mask for AGC Coarse high */ #define AR5K_PHY_AGCCOARSE_HI_S 15 /* @@ -1689,12 +1988,13 @@ /* * PHY noise floor status register */ -#define AR5K_PHY_NF 0x9864 -#define AR5K_PHY_NF_M 0x000001ff -#define AR5K_PHY_NF_ACTIVE 0x00000100 +#define AR5K_PHY_NF 0x9864 /* Register address */ +#define AR5K_PHY_NF_M 0x000001ff /* Noise floor mask */ +#define AR5K_PHY_NF_ACTIVE 0x00000100 /* Noise floor calibration still active */ #define AR5K_PHY_NF_RVAL(_n) (((_n) >> 19) & AR5K_PHY_NF_M) #define AR5K_PHY_NF_AVAL(_n) (-((_n) ^ AR5K_PHY_NF_M) + 1) #define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9)) +#define AR5K_PHY_NF_THRESH62 0x00001000 /* Thresh62 -check ANI patent- (field) */ /* * PHY ADC saturation register [5110] @@ -1705,6 +2005,30 @@ #define AR5K_PHY_ADCSAT_THR 0x000007e0 #define AR5K_PHY_ADCSAT_THR_S 5 +/* + * PHY Weak ofdm signal detection threshold registers (ANI) [5212+] + */ + +/* High thresholds */ +#define AR5K_PHY_WEAK_OFDM_HIGH_THR 0x9868 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT 0x0000001f +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_COUNT_S 0 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1 0x00fe0000 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M1_S 17 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2 0x7f000000 +#define AR5K_PHY_WEAK_OFDM_HIGH_THR_M2_S 24 + +/* Low thresholds */ +#define AR5K_PHY_WEAK_OFDM_LOW_THR 0x986c +#define AR5K_PHY_WEAK_OFDM_LOW_THR_SELFCOR_EN 0x00000001 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT 0x00003f00 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_COUNT_S 8 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1 0x001fc000 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M1_S 14 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2 0x0fe00000 +#define AR5K_PHY_WEAK_OFDM_LOW_THR_M2_S 21 + + /* * PHY sleep registers [5112+] */ @@ -1730,6 +2054,8 @@ AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212) #define AR5K_PHY_PLL_RF5111 0x00000000 #define AR5K_PHY_PLL_RF5112 0x00000040 +#define AR5K_PHY_PLL_HALF_RATE 0x00000100 +#define AR5K_PHY_PLL_QUARTER_RATE 0x00000200 /* * RF Buffer register @@ -1791,24 +2117,75 @@ #define AR5K_PHY_RFSTG 0x98d4 #define AR5K_PHY_RFSTG_DISABLE 0x00000021 +/* + * PHY Antenna control register + */ +#define AR5K_PHY_ANT_CTL 0x9910 /* Register Address */ +#define AR5K_PHY_ANT_CTL_TXRX_EN 0x00000001 /* Enable TX/RX (?) */ +#define AR5K_PHY_ANT_CTL_SECTORED_ANT 0x00000004 /* Sectored Antenna */ +#define AR5K_PHY_ANT_CTL_HITUNE5 0x00000008 /* Hitune5 (?) */ +#define AR5K_PHY_ANT_CTL_SWTABLE_IDLE 0x00000010 /* Switch table idle (?) */ + /* * PHY receiver delay register [5111+] */ -#define AR5K_PHY_RX_DELAY 0x9914 -#define AR5K_PHY_RX_DELAY_M 0x00003fff +#define AR5K_PHY_RX_DELAY 0x9914 /* Register Address */ +#define AR5K_PHY_RX_DELAY_M 0x00003fff /* Mask for RX activate to receive delay (/100ns) */ + +/* + * PHY max rx length register (?) [5111] + */ +#define AR5K_PHY_MAX_RX_LEN 0x991c /* - * PHY timing I(nphase) Q(adrature) control register [5111+] + * PHY timing register 4 + * I(nphase)/Q(adrature) calibration register [5111+] */ -#define AR5K_PHY_IQ 0x9920 /* Register address */ +#define AR5K_PHY_IQ 0x9920 /* Register Address */ #define AR5K_PHY_IQ_CORR_Q_Q_COFF 0x0000001f /* Mask for q correction info */ #define AR5K_PHY_IQ_CORR_Q_I_COFF 0x000007e0 /* Mask for i correction info */ #define AR5K_PHY_IQ_CORR_Q_I_COFF_S 5 #define AR5K_PHY_IQ_CORR_ENABLE 0x00000800 /* Enable i/q correction */ -#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX 0x0000f000 +#define AR5K_PHY_IQ_CAL_NUM_LOG_MAX 0x0000f000 /* Mask for max number of samples in log scale */ #define AR5K_PHY_IQ_CAL_NUM_LOG_MAX_S 12 #define AR5K_PHY_IQ_RUN 0x00010000 /* Run i/q calibration */ +#define AR5K_PHY_IQ_USE_PT_DF 0x00020000 /* Use pilot track df (?) */ +#define AR5K_PHY_IQ_EARLY_TRIG_THR 0x00200000 /* Early trigger threshold (?) (field) */ +#define AR5K_PHY_IQ_PILOT_MASK_EN 0x10000000 /* Enable pilot mask (?) */ +#define AR5K_PHY_IQ_CHAN_MASK_EN 0x20000000 /* Enable channel mask (?) */ +#define AR5K_PHY_IQ_SPUR_FILT_EN 0x40000000 /* Enable spur filter */ +#define AR5K_PHY_IQ_SPUR_RSSI_EN 0x80000000 /* Enable spur rssi */ +/* + * PHY timing register 5 + * OFDM Self-correlator Cyclic RSSI threshold params + * (Check out bb_cycpwr_thr1 on ANI patent) + */ +#define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */ +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */ +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */ +#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */ +#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */ +#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */ +#define AR5K_PHY_OFDM_SELFCORR_LSCTHR_HIRSSI 0x00800000 /* Long sc threshold hi rssi (?) */ + +/* + * PHY-only warm reset register + */ +#define AR5K_PHY_WARM_RESET 0x9928 + +/* + * PHY-only control register + */ +#define AR5K_PHY_CTL 0x992c /* Register Address */ +#define AR5K_PHY_CTL_RX_DRAIN_RATE 0x00000001 /* RX drain rate (?) */ +#define AR5K_PHY_CTL_LATE_TX_SIG_SYM 0x00000002 /* Late tx signal symbol (?) */ +#define AR5K_PHY_CTL_GEN_SCRAMBLER 0x00000004 /* Generate scrambler */ +#define AR5K_PHY_CTL_TX_ANT_SEL 0x00000008 /* TX antenna select */ +#define AR5K_PHY_CTL_TX_ANT_STATIC 0x00000010 /* Static TX antenna */ +#define AR5K_PHY_CTL_RX_ANT_SEL 0x00000020 /* RX antenna select */ +#define AR5K_PHY_CTL_RX_ANT_STATIC 0x00000040 /* Static RX antenna */ +#define AR5K_PHY_CTL_LOW_FREQ_SLE_EN 0x00000080 /* Enable low freq sleep */ /* * PHY PAPD probe register [5111+ (?)] @@ -1816,9 +2193,13 @@ * Because it's always 0 in 5211 initialization code */ #define AR5K_PHY_PAPD_PROBE 0x9930 +#define AR5K_PHY_PAPD_PROBE_SH_HI_PAR 0x00000001 +#define AR5K_PHY_PAPD_PROBE_PCDAC_BIAS 0x00000002 +#define AR5K_PHY_PAPD_PROBE_COMP_GAIN 0x00000040 #define AR5K_PHY_PAPD_PROBE_TXPOWER 0x00007e00 #define AR5K_PHY_PAPD_PROBE_TXPOWER_S 9 #define AR5K_PHY_PAPD_PROBE_TX_NEXT 0x00008000 +#define AR5K_PHY_PAPD_PROBE_PREDIST_EN 0x00010000 #define AR5K_PHY_PAPD_PROBE_TYPE 0x01800000 /* [5112+] */ #define AR5K_PHY_PAPD_PROBE_TYPE_S 23 #define AR5K_PHY_PAPD_PROBE_TYPE_OFDM 0 @@ -1848,15 +2229,16 @@ #define AR5K_PHY_FRAME_CTL (ah->ah_version == AR5K_AR5210 ? \ AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211) /*---[5111+]---*/ -#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 +#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */ #define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3 +#define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */ /*---[5110/5111]---*/ -#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 -#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 -#define AR5K_PHY_FRAME_CTL_ILLRATE_ERR 0x04000000 /* illegal rate */ -#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* illegal length */ +#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */ +#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */ +#define AR5K_PHY_FRAME_CTL_ILLRATE_ERR 0x04000000 /* Illegal rate */ +#define AR5K_PHY_FRAME_CTL_ILLLEN_ERR 0x08000000 /* Illegal length */ #define AR5K_PHY_FRAME_CTL_SERVICE_ERR 0x20000000 -#define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* tx underrun */ +#define AR5K_PHY_FRAME_CTL_TXURN_ERR 0x40000000 /* TX underrun */ #define AR5K_PHY_FRAME_CTL_INI AR5K_PHY_FRAME_CTL_SERVICE_ERR | \ AR5K_PHY_FRAME_CTL_TXURN_ERR | \ AR5K_PHY_FRAME_CTL_ILLLEN_ERR | \ @@ -1914,6 +2296,11 @@ after DFS is enabled */ #define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960 #define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964 +/* + * PHY Noise floor threshold + */ +#define AR5K_PHY_NFTHRES 0x9968 + /* * PHY clock sleep registers [5112+] */ @@ -1922,56 +2309,116 @@ after DFS is enabled */ #define AR5K_PHY_SDELAY 0x99f4 #define AR5K_PHY_SDELAY_32MHZ 0x000000ff #define AR5K_PHY_SPENDING 0x99f8 +#define AR5K_PHY_SPENDING_14 0x00000014 +#define AR5K_PHY_SPENDING_18 0x00000018 #define AR5K_PHY_SPENDING_RF5111 0x00000018 -#define AR5K_PHY_SPENDING_RF5112 0x00000014 /* <- i 've only seen this on 2425 dumps ! */ -#define AR5K_PHY_SPENDING_RF5112A 0x0000000e /* but since i only have 5112A-based chips */ -#define AR5K_PHY_SPENDING_RF5424 0x00000012 /* to test it might be also for old 5112. */ +#define AR5K_PHY_SPENDING_RF5112 0x00000014 +/* #define AR5K_PHY_SPENDING_RF5112A 0x0000000e */ +/* #define AR5K_PHY_SPENDING_RF5424 0x00000012 */ +#define AR5K_PHY_SPENDING_RF5413 0x00000014 +#define AR5K_PHY_SPENDING_RF2413 0x00000014 +#define AR5K_PHY_SPENDING_RF2425 0x00000018 /* * Misc PHY/radio registers [5110 - 5111] */ -#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ +#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */ #define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2)) -#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */ +#define AR5K_RF_GAIN_BASE 0x9a00 /* RF Amplrifier Gain table base address */ #define AR5K_RF_GAIN(_n) (AR5K_RF_GAIN_BASE + ((_n) << 2)) /* * PHY timing IQ calibration result register [5111+] */ -#define AR5K_PHY_IQRES_CAL_PWR_I 0x9c10 /* I (Inphase) power value */ -#define AR5K_PHY_IQRES_CAL_PWR_Q 0x9c14 /* Q (Quadrature) power value */ +#define AR5K_PHY_IQRES_CAL_PWR_I 0x9c10 /* I (Inphase) power value */ +#define AR5K_PHY_IQRES_CAL_PWR_Q 0x9c14 /* Q (Quadrature) power value */ #define AR5K_PHY_IQRES_CAL_CORR 0x9c18 /* I/Q Correlation */ /* * PHY current RSSI register [5111+] */ -#define AR5K_PHY_CURRENT_RSSI 0x9c1c +#define AR5K_PHY_CURRENT_RSSI 0x9c1c + +/* + * PHY RF Bus grant register (?) + */ +#define AR5K_PHY_RFBUS_GRANT 0x9c20 + +/* + * PHY ADC test register + */ +#define AR5K_PHY_ADC_TEST 0x9c24 +#define AR5K_PHY_ADC_TEST_I 0x00000001 +#define AR5K_PHY_ADC_TEST_Q 0x00000200 + +/* + * PHY DAC test register + */ +#define AR5K_PHY_DAC_TEST 0x9c28 +#define AR5K_PHY_DAC_TEST_I 0x00000001 +#define AR5K_PHY_DAC_TEST_Q 0x00000200 + +/* + * PHY PTAT register (?) + */ +#define AR5K_PHY_PTAT 0x9c2c + +/* + * PHY Illegal TX rate register [5112+] + */ +#define AR5K_PHY_BAD_TX_RATE 0x9c30 + +/* + * PHY SPUR Power register [5112+] + */ +#define AR5K_PHY_SPUR_PWR 0x9c34 /* Register Address */ +#define AR5K_PHY_SPUR_PWR_I 0x00000001 /* SPUR Power estimate for I (field) */ +#define AR5K_PHY_SPUR_PWR_Q 0x00000100 /* SPUR Power estimate for Q (field) */ +#define AR5K_PHY_SPUR_PWR_FILT 0x00010000 /* Power with SPUR removed (field) */ + +/* + * PHY Channel status register [5112+] (?) + */ +#define AR5K_PHY_CHAN_STATUS 0x9c38 +#define AR5K_PHY_CHAN_STATUS_BT_ACT 0x00000001 +#define AR5K_PHY_CHAN_STATUS_RX_CLR_RAW 0x00000002 +#define AR5K_PHY_CHAN_STATUS_RX_CLR_MAC 0x00000004 +#define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008 + +/* + * PHY PAPD I (power?) table (?) + * (92! entries) + */ +#define AR5K_PHY_PAPD_I_BASE 0xa000 +#define AR5K_PHY_PAPD_I(_n) (AR5K_PHY_PAPD_I_BASE + ((_n) << 2)) /* * PHY PCDAC TX power table */ #define AR5K_PHY_PCDAC_TXPOWER_BASE_5211 0xa180 -#define AR5K_PHY_PCDAC_TXPOWER_BASE_5413 0xa280 -#define AR5K_PHY_PCDAC_TXPOWER_BASE (ah->ah_radio >= AR5K_RF5413 ? \ - AR5K_PHY_PCDAC_TXPOWER_BASE_5413 :\ +#define AR5K_PHY_PCDAC_TXPOWER_BASE_2413 0xa280 +#define AR5K_PHY_PCDAC_TXPOWER_BASE (ah->ah_radio >= AR5K_RF2413 ? \ + AR5K_PHY_PCDAC_TXPOWER_BASE_2413 :\ AR5K_PHY_PCDAC_TXPOWER_BASE_5211) #define AR5K_PHY_PCDAC_TXPOWER(_n) (AR5K_PHY_PCDAC_TXPOWER_BASE + ((_n) << 2)) /* * PHY mode register [5111+] */ -#define AR5K_PHY_MODE 0x0a200 /* Register address */ -#define AR5K_PHY_MODE_MOD 0x00000001 /* PHY Modulation mask*/ +#define AR5K_PHY_MODE 0x0a200 /* Register Address */ +#define AR5K_PHY_MODE_MOD 0x00000001 /* PHY Modulation bit */ #define AR5K_PHY_MODE_MOD_OFDM 0 #define AR5K_PHY_MODE_MOD_CCK 1 -#define AR5K_PHY_MODE_FREQ 0x00000002 /* Freq mode mask */ +#define AR5K_PHY_MODE_FREQ 0x00000002 /* Freq mode bit */ #define AR5K_PHY_MODE_FREQ_5GHZ 0 #define AR5K_PHY_MODE_FREQ_2GHZ 2 -#define AR5K_PHY_MODE_MOD_DYN 0x00000004 /* Dynamic OFDM/CCK mode mask [5112+] */ +#define AR5K_PHY_MODE_MOD_DYN 0x00000004 /* Enable Dynamic OFDM/CCK mode [5112+] */ #define AR5K_PHY_MODE_RAD 0x00000008 /* [5212+] */ #define AR5K_PHY_MODE_RAD_RF5111 0 #define AR5K_PHY_MODE_RAD_RF5112 8 -#define AR5K_PHY_MODE_XR 0x00000010 /* [5112+] */ +#define AR5K_PHY_MODE_XR 0x00000010 /* Enable XR mode [5112+] */ +#define AR5K_PHY_MODE_HALF_RATE 0x00000020 /* Enable Half rate (test) */ +#define AR5K_PHY_MODE_QUARTER_RATE 0x00000040 /* Enable Quarter rat (test) */ /* * PHY CCK transmit control register [5111+ (?)] @@ -1979,6 +2426,15 @@ after DFS is enabled */ #define AR5K_PHY_CCKTXCTL 0xa204 #define AR5K_PHY_CCKTXCTL_WORLD 0x00000000 #define AR5K_PHY_CCKTXCTL_JAPAN 0x00000010 +#define AR5K_PHY_CCKTXCTL_SCRAMBLER_DIS 0x00000001 +#define AR5K_PHY_CCKTXCTK_DAC_SCALE 0x00000004 + +/* + * PHY CCK Cross-correlator Barker RSSI threshold register [5212+] + */ +#define AR5K_PHY_CCK_CROSSCORR 0xa208 +#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000000f +#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0 /* * PHY 2GHz gain register [5111+] -- GitLab From ba37746e547e14703a5ac86560c6e056620bc4cf Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:32:32 +0300 Subject: [PATCH 0585/1024] ath5k: Restore saved initval after POST * Restore saved initial value after POST Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/hw.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index 42ef41ed5d1..b3b9baa551b 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -139,6 +139,8 @@ static int ath5k_hw_post(struct ath5k_hw *ah) for (c = 0; c < 2; c++) { cur_reg = regs[c]; + + /* Save previous value */ init_val = ath5k_hw_reg_read(ah, cur_reg); for (i = 0; i < 256; i++) { @@ -170,6 +172,10 @@ static int ath5k_hw_post(struct ath5k_hw *ah) var_pattern = 0x003b080f; ath5k_hw_reg_write(ah, var_pattern, cur_reg); } + + /* Restore previous value */ + ath5k_hw_reg_write(ah, init_val, cur_reg); + } return 0; -- GitLab From e5a4ad0dda8f79a984ba6391af65274b482b6703 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:34:39 +0300 Subject: [PATCH 0586/1024] ath5k: Misc hw_attach fixes * Correctly attach RF2425 * Update SREV values for Radio chips * Update hw_attach to use new SPENDING values * Write a bit after POST for some chips Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/ath5k.h | 8 ++-- drivers/net/wireless/ath5k/hw.c | 62 ++++++++++-------------------- 2 files changed, 26 insertions(+), 44 deletions(-) diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h index ba35c30d203..9102eea3c8b 100644 --- a/drivers/net/wireless/ath5k/ath5k.h +++ b/drivers/net/wireless/ath5k/ath5k.h @@ -186,11 +186,13 @@ struct ath5k_srev_name { #define AR5K_SREV_RAD_2111 0x20 #define AR5K_SREV_RAD_5112 0x30 #define AR5K_SREV_RAD_5112A 0x35 +#define AR5K_SREV_RAD_5112B 0x36 #define AR5K_SREV_RAD_2112 0x40 #define AR5K_SREV_RAD_2112A 0x45 -#define AR5K_SREV_RAD_SC0 0x56 /* Found on 2413/2414 */ -#define AR5K_SREV_RAD_SC1 0x63 /* Found on 5413/5414 */ -#define AR5K_SREV_RAD_SC2 0xa2 /* Found on 2424-5/5424 */ +#define AR5K_SREV_RAD_2112B 0x46 +#define AR5K_SREV_RAD_SC0 0x50 /* Found on 2413/2414 */ +#define AR5K_SREV_RAD_SC1 0x60 /* Found on 5413/5414 */ +#define AR5K_SREV_RAD_SC2 0xa0 /* Found on 2424-5/5424 */ #define AR5K_SREV_RAD_5133 0xc0 /* MIMO found on 5418 */ /* IEEE defs */ diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index b3b9baa551b..8cd8659e912 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -293,67 +293,42 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) /* Identify the radio chip*/ if (ah->ah_version == AR5K_AR5210) { ah->ah_radio = AR5K_RF5110; + /* + * Register returns 0x0/0x04 for radio revision + * so ath5k_hw_radio_revision doesn't parse the value + * correctly. For now we are based on mac's srev to + * identify RF2425 radio. + */ + } else if (srev == AR5K_SREV_VER_AR2425) { + ah->ah_radio = AR5K_RF2425; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425; } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) { ah->ah_radio = AR5K_RF5111; ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111; } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) { - ah->ah_radio = AR5K_RF5112; - - if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112A) { - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; - } else { - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A; - } - + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) { ah->ah_radio = AR5K_RF2413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) { ah->ah_radio = AR5K_RF5413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) { - /* AR5424 */ if (srev >= AR5K_SREV_VER_AR5424) { ah->ah_radio = AR5K_RF5413; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5424; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413; /* AR2424 */ } else { ah->ah_radio = AR5K_RF2413; /* For testing */ - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112A; + ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413; } - - /* - * Register returns 0x4 for radio revision - * so ath5k_hw_radio_revision doesn't parse the value - * correctly. For now we are based on mac's srev to - * identify RF2425 radio. - */ - } else if (srev == AR5K_SREV_VER_AR2425) { - ah->ah_radio = AR5K_RF2425; - ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112; } - ah->ah_phy = AR5K_PHY(0); /* - * Identify AR5212-based PCI-E cards - * And write some initial settings. - * - * (doing a "strings" on ndis driver - * -ar5211.sys- reveals the following - * pci-e related functions: - * - * pcieClockReq - * pcieRxErrNotify - * pcieL1SKPEnable - * pcieAspm - * pcieDisableAspmOnRfWake - * pciePowerSaveEnable - * - * I guess these point to ClockReq but - * i'm not sure.) + * Write PCI-E power save settings */ if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) { ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080); @@ -375,10 +350,15 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version) if (ret) goto err_free; + /* Write AR5K_PCICFG_UNK on 2112B and later chips */ + if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B || + srev > AR5K_SREV_VER_AR2413) { + ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG); + } + /* * Get card capabilities, values, ... */ - ret = ath5k_eeprom_init(ah); if (ret) { ATH5K_ERR(sc, "unable to init EEPROM\n"); -- GitLab From 2203d6be7ed17af81a1dc35a0af9806086743b02 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:36:52 +0300 Subject: [PATCH 0587/1024] ath5k: Misc hw_reset updates * Update hw_reset to calculate some of the values we were using as static * Increase activation to rx delay Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/hw.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index 8cd8659e912..dc51b844c62 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -847,7 +847,22 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, else ath5k_hw_reg_write(ah, 0x00000000, 0x994c); - ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); + /* Some bits are disabled here, we know nothing about + * register 0xa228 yet, most of the times this ends up + * with a value 0x9b5 -haven't seen any dump with + * a different value- */ + /* Got this from decompiling binary HAL */ + data = ath5k_hw_reg_read(ah, 0xa228); + data &= 0xfffffdff; + ath5k_hw_reg_write(ah, data, 0xa228); + + data = ath5k_hw_reg_read(ah, 0xa228); + data &= 0xfffe03ff; + ath5k_hw_reg_write(ah, data, 0xa228); + data = 0; + + /* Just write 0x9b5 ? */ + /* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */ ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK); ath5k_hw_reg_write(ah, 0x00000000, 0xa254); ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL); @@ -864,6 +879,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, else data = 0xffb80d20; ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); + data = 0; } /* @@ -883,7 +899,6 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, /* * Write RF registers - * TODO:Does this work on 5211 (5111) ? */ ret = ath5k_hw_rfregs(ah, channel, mode); if (ret) @@ -1048,7 +1063,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); /* - * 5111/5112 Specific + * On 5211+ read activation -> rx delay + * and use it. */ if (ah->ah_version != AR5K_AR5210) { data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & @@ -1056,7 +1072,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, data = (channel->hw_value & CHANNEL_CCK) ? ((data << 2) / 22) : (data / 10); - udelay(100 + data); + udelay(100 + (2 * data)); + data = 0; } else { mdelay(1); } @@ -1139,6 +1156,12 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK); ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY); ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING); + + data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ; + data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ? + 0x00000f80 : 0x00001380 ; + ath5k_hw_reg_write(ah, data, AR5K_USEC_5211); + data = 0; } if (ah->ah_version == AR5K_AR5212) { -- GitLab From e2a0ccebc4ffabc1c7234cfd324299b5a936e0f2 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:38:16 +0300 Subject: [PATCH 0588/1024] ath5k: Do ADC test during reset * Do an ADC test during reset to match recent regdumps Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/hw.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index dc51b844c62..3937e46e473 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -1078,6 +1078,19 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, mdelay(1); } + /* + * Perform ADC test (?) + */ + data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); + ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); + for (i = 0; i <= 20; i++) { + if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) + break; + udelay(200); + } + ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1); + data = 0; + /* * Enable calibration and wait until completion */ -- GitLab From df75dcddf99647d68f3b6b874effe5365c5024d9 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:41:26 +0300 Subject: [PATCH 0589/1024] ath5k: Reorder calibration calls during reset and update hw_set_power * Update ath5k_hw_reset and add some more documentation about PHY calibration * Fix ath5k_hw_set_power to use AR5K_SLEEP_CTL_SLE_ALLOW for Network sleep * Preserve sleep duration field while setting AR5K_SLEEP_CTL and reduce delays & checks for register's status (got this from decompiling & dumps, it works for me but it needs testing) Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/hw.c | 82 ++++++++++++++++++++++++--------- 1 file changed, 59 insertions(+), 23 deletions(-) diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c index 3937e46e473..ad1a5b422c8 100644 --- a/drivers/net/wireless/ath5k/hw.c +++ b/drivers/net/wireless/ath5k/hw.c @@ -1092,34 +1092,57 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, data = 0; /* - * Enable calibration and wait until completion + * Start automatic gain calibration + * + * During AGC calibration RX path is re-routed to + * a signal detector so we don't receive anything. + * + * This method is used to calibrate some static offsets + * used together with on-the fly I/Q calibration (the + * one performed via ath5k_hw_phy_calibrate), that doesn't + * interrupt rx path. + * + * If we are in a noisy environment AGC calibration may time + * out. */ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_CAL); + /* At the same time start I/Q calibration for QAM constellation + * -no need for CCK- */ + ah->ah_calibration = false; + if (!(mode == AR5K_MODE_11B)) { + ah->ah_calibration = true; + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_RUN); + } + + /* Wait for gain calibration to finish (we check for I/Q calibration + * during ath5k_phy_calibrate) */ if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_CAL, 0, false)) { - ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n", + ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n", channel->center_freq); return -EAGAIN; } + /* + * Start noise floor calibration + * + * If we run NF calibration before AGC, it always times out. + * Binary HAL starts NF and AGC calibration at the same time + * and only waits for AGC to finish. I believe that's wrong because + * during NF calibration, rx path is also routed to a detector, so if + * it doesn't finish we won't have RX. + * + * XXX: Find an interval that's OK for all cards... + */ ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq); if (ret) return ret; - ah->ah_calibration = false; - - /* A and G modes can use QAM modulation which requires enabling - * I and Q calibration. Don't bother in B mode. */ - if (!(mode == AR5K_MODE_11B)) { - ah->ah_calibration = true; - AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); - AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, - AR5K_PHY_IQ_RUN); - } - /* * Reset queues and start beacon timers at the end of the reset routine */ @@ -1247,7 +1270,7 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration) { unsigned int i; - u32 staid; + u32 staid, data; ATH5K_TRACE(ah->ah_sc); staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1); @@ -1259,7 +1282,8 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, case AR5K_PM_NETWORK_SLEEP: if (set_chip) ath5k_hw_reg_write(ah, - AR5K_SLEEP_CTL_SLE | sleep_duration, + AR5K_SLEEP_CTL_SLE_ALLOW | + sleep_duration, AR5K_SLEEP_CTL); staid |= AR5K_STA_ID1_PWR_SV; @@ -1274,13 +1298,24 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, break; case AR5K_PM_AWAKE: + + staid &= ~AR5K_STA_ID1_PWR_SV; + if (!set_chip) goto commit; - ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE, - AR5K_SLEEP_CTL); + /* Preserve sleep duration */ + data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL); + if( data & 0xffc00000 ){ + data = 0; + } else { + data = data & 0xfffcffff; + } + + ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); + udelay(15); - for (i = 5000; i > 0; i--) { + for (i = 50; i > 0; i--) { /* Check if the chip did wake up */ if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_SPWR_DN) == 0) @@ -1288,15 +1323,13 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, /* Wait a bit and retry */ udelay(200); - ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE, - AR5K_SLEEP_CTL); + ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL); } /* Fail if the chip didn't wake up */ if (i <= 0) return -EIO; - staid &= ~AR5K_STA_ID1_PWR_SV; break; default: @@ -1325,6 +1358,7 @@ void ath5k_hw_start_rx(struct ath5k_hw *ah) { ATH5K_TRACE(ah->ah_sc); ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); } /* @@ -1411,6 +1445,7 @@ int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue) } /* Start queue */ ath5k_hw_reg_write(ah, tx_queue, AR5K_CR); + ath5k_hw_reg_read(ah, AR5K_CR); } else { /* Return if queue is disabled */ if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue)) @@ -1708,6 +1743,7 @@ enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask) * (they will be re-enabled afterwards). */ ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER); + ath5k_hw_reg_read(ah, AR5K_IER); old_mask = ah->ah_imr; @@ -3511,7 +3547,7 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue) if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE) AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue), - AR5K_QCU_MISC_TXE); + AR5K_QCU_MISC_RDY_VEOL_POLICY); } if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE) -- GitLab From 27bcdeed320c8c7dc0f502df43f6465f0d9840f1 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:42:47 +0300 Subject: [PATCH 0590/1024] ath5k: Add RF2425 initial rfgain values * Add initial RF gain settings for RF2425 Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/phy.c | 72 +++++++++++++++++++++++++++++++- 1 file changed, 70 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index afd8689e5c0..66af70bd14e 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -1020,6 +1020,74 @@ static const struct ath5k_ini_rfgain rfgain_2413[] = { { AR5K_RF_GAIN(63), { 0x000000f9 } }, }; +/* Initial RF Gain settings for RF2425 */ +static const struct ath5k_ini_rfgain rfgain_2425[] = { + { AR5K_RF_GAIN(0), { 0x00000000 } }, + { AR5K_RF_GAIN(1), { 0x00000040 } }, + { AR5K_RF_GAIN(2), { 0x00000080 } }, + { AR5K_RF_GAIN(3), { 0x00000181 } }, + { AR5K_RF_GAIN(4), { 0x000001c1 } }, + { AR5K_RF_GAIN(5), { 0x00000001 } }, + { AR5K_RF_GAIN(6), { 0x00000041 } }, + { AR5K_RF_GAIN(7), { 0x00000081 } }, + { AR5K_RF_GAIN(8), { 0x00000188 } }, + { AR5K_RF_GAIN(9), { 0x000001c8 } }, + { AR5K_RF_GAIN(10), { 0x00000008 } }, + { AR5K_RF_GAIN(11), { 0x00000048 } }, + { AR5K_RF_GAIN(12), { 0x00000088 } }, + { AR5K_RF_GAIN(13), { 0x00000189 } }, + { AR5K_RF_GAIN(14), { 0x000001c9 } }, + { AR5K_RF_GAIN(15), { 0x00000009 } }, + { AR5K_RF_GAIN(16), { 0x00000049 } }, + { AR5K_RF_GAIN(17), { 0x00000089 } }, + { AR5K_RF_GAIN(18), { 0x000001b0 } }, + { AR5K_RF_GAIN(19), { 0x000001f0 } }, + { AR5K_RF_GAIN(20), { 0x00000030 } }, + { AR5K_RF_GAIN(21), { 0x00000070 } }, + { AR5K_RF_GAIN(22), { 0x00000171 } }, + { AR5K_RF_GAIN(23), { 0x000001b1 } }, + { AR5K_RF_GAIN(24), { 0x000001f1 } }, + { AR5K_RF_GAIN(25), { 0x00000031 } }, + { AR5K_RF_GAIN(26), { 0x00000071 } }, + { AR5K_RF_GAIN(27), { 0x000001b8 } }, + { AR5K_RF_GAIN(28), { 0x000001f8 } }, + { AR5K_RF_GAIN(29), { 0x00000038 } }, + { AR5K_RF_GAIN(30), { 0x00000078 } }, + { AR5K_RF_GAIN(31), { 0x000000b8 } }, + { AR5K_RF_GAIN(32), { 0x000001b9 } }, + { AR5K_RF_GAIN(33), { 0x000001f9 } }, + { AR5K_RF_GAIN(34), { 0x00000039 } }, + { AR5K_RF_GAIN(35), { 0x00000079 } }, + { AR5K_RF_GAIN(36), { 0x000000b9 } }, + { AR5K_RF_GAIN(37), { 0x000000f9 } }, + { AR5K_RF_GAIN(38), { 0x000000f9 } }, + { AR5K_RF_GAIN(39), { 0x000000f9 } }, + { AR5K_RF_GAIN(40), { 0x000000f9 } }, + { AR5K_RF_GAIN(41), { 0x000000f9 } }, + { AR5K_RF_GAIN(42), { 0x000000f9 } }, + { AR5K_RF_GAIN(43), { 0x000000f9 } }, + { AR5K_RF_GAIN(44), { 0x000000f9 } }, + { AR5K_RF_GAIN(45), { 0x000000f9 } }, + { AR5K_RF_GAIN(46), { 0x000000f9 } }, + { AR5K_RF_GAIN(47), { 0x000000f9 } }, + { AR5K_RF_GAIN(48), { 0x000000f9 } }, + { AR5K_RF_GAIN(49), { 0x000000f9 } }, + { AR5K_RF_GAIN(50), { 0x000000f9 } }, + { AR5K_RF_GAIN(51), { 0x000000f9 } }, + { AR5K_RF_GAIN(52), { 0x000000f9 } }, + { AR5K_RF_GAIN(53), { 0x000000f9 } }, + { AR5K_RF_GAIN(54), { 0x000000f9 } }, + { AR5K_RF_GAIN(55), { 0x000000f9 } }, + { AR5K_RF_GAIN(56), { 0x000000f9 } }, + { AR5K_RF_GAIN(57), { 0x000000f9 } }, + { AR5K_RF_GAIN(58), { 0x000000f9 } }, + { AR5K_RF_GAIN(59), { 0x000000f9 } }, + { AR5K_RF_GAIN(60), { 0x000000f9 } }, + { AR5K_RF_GAIN(61), { 0x000000f9 } }, + { AR5K_RF_GAIN(62), { 0x000000f9 } }, + { AR5K_RF_GAIN(63), { 0x000000f9 } }, +}; + static const struct ath5k_gain_opt rfgain_opt_5112 = { 1, 8, @@ -1588,8 +1656,8 @@ int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq) freq = 0; /* only 2Ghz */ break; case AR5K_RF2425: - ath5k_rfg = rfgain_2413; - size = ARRAY_SIZE(rfgain_2413); + ath5k_rfg = rfgain_2425; + size = ARRAY_SIZE(rfgain_2425); freq = 0; /* only 2Ghz */ break; default: -- GitLab From cc6323c7d8c231d83e592ff9f7acf2cac5e016f7 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:44:43 +0300 Subject: [PATCH 0591/1024] ath5k: Update channel functions * Add channel function for RF2425 (got this from decompiling binary HAL, i have no idea why there is a 5GHz section but i'm looking into it) * Update RF5112 channel function (also got this from decompiling binary HAL) * Set JAPAN setting for channel 14 on all PHY chips Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/phy.c | 59 +++++++++++++++++++++++++++++--- 1 file changed, 55 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index 66af70bd14e..cbc362d2071 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -1898,9 +1898,6 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, data = data0 = data1 = data2 = 0; c = channel->center_freq; - /* - * Set the channel on the RF5112 or newer - */ if (c < 4800) { if (!((c - 2224) % 5)) { data0 = ((2 * (c - 704)) - 3040) / 10; @@ -1912,7 +1909,7 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, return -EINVAL; data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8); - } else { + } else if ((c - (c % 5)) != 2 || c > 5435) { if (!(c % 20) && c >= 5120) { data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8); data2 = ath5k_hw_bitswap(3, 2); @@ -1924,6 +1921,9 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, data2 = ath5k_hw_bitswap(1, 2); } else return -EINVAL; + } else { + data0 = ath5k_hw_bitswap((10 * (c - 2) - 4800) / 25 + 1, 8); + data2 = ath5k_hw_bitswap(0, 2); } data = (data0 << 4) | (data1 << 1) | (data2 << 2) | 0x1001; @@ -1934,6 +1934,45 @@ static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah, return 0; } +/* + * Set the channel on the RF2425 + */ +static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + u32 data, data0, data2; + u16 c; + + data = data0 = data2 = 0; + c = channel->center_freq; + + if (c < 4800) { + data0 = ath5k_hw_bitswap((c - 2272), 8); + data2 = 0; + /* ? 5GHz ? */ + } else if ((c - (c % 5)) != 2 || c > 5435) { + if (!(c % 20) && c < 5120) + data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8); + else if (!(c % 10)) + data0 = ath5k_hw_bitswap(((c - 4800) / 10 << 1), 8); + else if (!(c % 5)) + data0 = ath5k_hw_bitswap((c - 4800) / 5, 8); + else + return -EINVAL; + data2 = ath5k_hw_bitswap(1, 2); + } else { + data0 = ath5k_hw_bitswap((10 * (c - 2) - 4800) / 25 + 1, 8); + data2 = ath5k_hw_bitswap(0, 2); + } + + data = (data0 << 4) | data2 << 2 | 0x1001; + + ath5k_hw_reg_write(ah, data & 0xff, AR5K_RF_BUFFER); + ath5k_hw_reg_write(ah, (data >> 8) & 0x7f, AR5K_RF_BUFFER_CONTROL_5); + + return 0; +} + /* * Set a channel on the radio chip */ @@ -1963,6 +2002,9 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) case AR5K_RF5111: ret = ath5k_hw_rf5111_channel(ah, channel); break; + case AR5K_RF2425: + ret = ath5k_hw_rf2425_channel(ah, channel); + break; default: ret = ath5k_hw_rf5112_channel(ah, channel); break; @@ -1971,6 +2013,15 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) if (ret) return ret; + /* Set JAPAN setting for channel 14 */ + if (channel->center_freq == 2484) { + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL, + AR5K_PHY_CCKTXCTL_JAPAN); + } else { + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_CCKTXCTL, + AR5K_PHY_CCKTXCTL_WORLD); + } + ah->ah_current_channel.center_freq = channel->center_freq; ah->ah_current_channel.hw_value = channel->hw_value; ah->ah_turbo = channel->hw_value == CHANNEL_T ? true : false; -- GitLab From f860ee26db51c478fd70039bd4902912a8d93993 Mon Sep 17 00:00:00 2001 From: Nick Kossifidis Date: Sun, 20 Jul 2008 06:47:12 +0300 Subject: [PATCH 0592/1024] ath5k: Update phy calibration functions * Enable I/Q calibration each time we have correction results (we were only enabling calibration during reset). If we don't we commit the same results each time calibration routine is called. * Add some documentation and a TODO on nf calibration * Return -EAGAIN on noise floor timeout/failure Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/phy.c | 54 +++++++++++++++++++++++++------- 1 file changed, 42 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index cbc362d2071..fa0d47faf57 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -2052,6 +2052,8 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel) * http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL \ * &p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7245893.PN.&OS=PN/7 * + * XXX: Since during noise floor calibration antennas are detached according to + * the patent, we should stop tx queues here. */ int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) @@ -2061,7 +2063,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) s32 noise_floor; /* - * Enable noise floor calibration and wait until completion + * Enable noise floor calibration */ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_NF); @@ -2071,7 +2073,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) if (ret) { ATH5K_ERR(ah->ah_sc, "noise floor calibration timeout (%uMHz)\n", freq); - return ret; + return -EAGAIN; } /* Wait until the noise floor is calibrated and read the value */ @@ -2093,7 +2095,7 @@ ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq) if (noise_floor > AR5K_TUNE_NOISE_FLOOR) { ATH5K_ERR(ah->ah_sc, "noise floor calibration failed (%uMHz)\n", freq); - return -EIO; + return -EAGAIN; } ah->ah_noise_floor = noise_floor; @@ -2206,38 +2208,66 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, } /* - * Perform a PHY calibration on RF5111/5112 + * Perform a PHY calibration on RF5111/5112 and newer chips */ static int ath5k_hw_rf511x_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel) { u32 i_pwr, q_pwr; s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd; + int i; ATH5K_TRACE(ah->ah_sc); if (!ah->ah_calibration || - ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) + ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) goto done; - ah->ah_calibration = false; + /* Calibration has finished, get the results and re-run */ + for (i = 0; i <= 10; i++) { + iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR); + i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I); + q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q); + } - iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR); - i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I); - q_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_Q); i_coffd = ((i_pwr >> 1) + (q_pwr >> 1)) >> 7; - q_coffd = q_pwr >> 6; + q_coffd = q_pwr >> 7; + /* No correction */ if (i_coffd == 0 || q_coffd == 0) goto done; i_coff = ((-iq_corr) / i_coffd) & 0x3f; - q_coff = (((s32)i_pwr / q_coffd) - 64) & 0x1f; - /* Commit new IQ value */ + /* Boundary check */ + if (i_coff > 31) + i_coff = 31; + if (i_coff < -32) + i_coff = -32; + + q_coff = (((s32)i_pwr / q_coffd) - 128) & 0x1f; + + /* Boundary check */ + if (q_coff > 15) + q_coff = 15; + if (q_coff < -16) + q_coff = -16; + + /* Commit new I/Q value */ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_CORR_ENABLE | ((u32)q_coff) | ((u32)i_coff << AR5K_PHY_IQ_CORR_Q_I_COFF_S)); + /* Re-enable calibration -if we don't we'll commit + * the same values again and again */ + AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ, + AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15); + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ, AR5K_PHY_IQ_RUN); + done: + + /* TODO: Separate noise floor calibration from I/Q calibration + * since noise floor calibration interrupts rx path while I/Q + * calibration doesn't. We don't need to run noise floor calibration + * as often as I/Q calibration.*/ ath5k_hw_noise_floor_calibration(ah, channel->center_freq); /* Request RF gain */ -- GitLab From 6e28fbef0f330d7c1cade345eeae003d4e5d6070 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Thu, 31 Jul 2008 10:53:57 -0300 Subject: [PATCH 0593/1024] rfkill: query EV_SW states when rfkill-input (re)?connects to a input device Every time a new input device that is capable of one of the rfkill EV_SW events (currently only SW_RFKILL_ALL) is connected to rfkill-input, we must check the states of the input EV_SW switches and take action. Otherwise, we will ignore the initial switch state. We also need to re-check the states of the EV_SW switches after a device that was under an exclusive grab is released back to us, since we got no input events from that device while it was grabbed. Signed-off-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Cc: Dmitry Torokhov Signed-off-by: John W. Linville --- net/rfkill/rfkill-input.c | 54 ++++++++++++++++++++++++++++----------- 1 file changed, 39 insertions(+), 15 deletions(-) diff --git a/net/rfkill/rfkill-input.c b/net/rfkill/rfkill-input.c index 8aa82273014..e5b69556bb5 100644 --- a/net/rfkill/rfkill-input.c +++ b/net/rfkill/rfkill-input.c @@ -109,6 +109,25 @@ static DEFINE_RFKILL_TASK(rfkill_uwb, RFKILL_TYPE_UWB); static DEFINE_RFKILL_TASK(rfkill_wimax, RFKILL_TYPE_WIMAX); static DEFINE_RFKILL_TASK(rfkill_wwan, RFKILL_TYPE_WWAN); +static void rfkill_schedule_evsw_rfkillall(int state) +{ + /* EVERY radio type. state != 0 means radios ON */ + /* handle EPO (emergency power off) through shortcut */ + if (state) { + rfkill_schedule_set(&rfkill_wwan, + RFKILL_STATE_UNBLOCKED); + rfkill_schedule_set(&rfkill_wimax, + RFKILL_STATE_UNBLOCKED); + rfkill_schedule_set(&rfkill_uwb, + RFKILL_STATE_UNBLOCKED); + rfkill_schedule_set(&rfkill_bt, + RFKILL_STATE_UNBLOCKED); + rfkill_schedule_set(&rfkill_wlan, + RFKILL_STATE_UNBLOCKED); + } else + rfkill_schedule_epo(); +} + static void rfkill_event(struct input_handle *handle, unsigned int type, unsigned int code, int data) { @@ -132,21 +151,7 @@ static void rfkill_event(struct input_handle *handle, unsigned int type, } else if (type == EV_SW) { switch (code) { case SW_RFKILL_ALL: - /* EVERY radio type. data != 0 means radios ON */ - /* handle EPO (emergency power off) through shortcut */ - if (data) { - rfkill_schedule_set(&rfkill_wwan, - RFKILL_STATE_UNBLOCKED); - rfkill_schedule_set(&rfkill_wimax, - RFKILL_STATE_UNBLOCKED); - rfkill_schedule_set(&rfkill_uwb, - RFKILL_STATE_UNBLOCKED); - rfkill_schedule_set(&rfkill_bt, - RFKILL_STATE_UNBLOCKED); - rfkill_schedule_set(&rfkill_wlan, - RFKILL_STATE_UNBLOCKED); - } else - rfkill_schedule_epo(); + rfkill_schedule_evsw_rfkillall(data); break; default: break; @@ -168,6 +173,7 @@ static int rfkill_connect(struct input_handler *handler, struct input_dev *dev, handle->handler = handler; handle->name = "rfkill"; + /* causes rfkill_start() to be called */ error = input_register_handle(handle); if (error) goto err_free_handle; @@ -185,6 +191,23 @@ static int rfkill_connect(struct input_handler *handler, struct input_dev *dev, return error; } +static void rfkill_start(struct input_handle *handle) +{ + /* Take event_lock to guard against configuration changes, we + * should be able to deal with concurrency with rfkill_event() + * just fine (which event_lock will also avoid). */ + spin_lock_irq(&handle->dev->event_lock); + + if (test_bit(EV_SW, handle->dev->evbit)) { + if (test_bit(SW_RFKILL_ALL, handle->dev->swbit)) + rfkill_schedule_evsw_rfkillall(test_bit(SW_RFKILL_ALL, + handle->dev->sw)); + /* add resync for further EV_SW events here */ + } + + spin_unlock_irq(&handle->dev->event_lock); +} + static void rfkill_disconnect(struct input_handle *handle) { input_close_device(handle); @@ -225,6 +248,7 @@ static struct input_handler rfkill_handler = { .event = rfkill_event, .connect = rfkill_connect, .disconnect = rfkill_disconnect, + .start = rfkill_start, .name = "rfkill", .id_table = rfkill_ids, }; -- GitLab From 7c4f4578fc85d42d149f86b47f76c28626a20d92 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 22 Jul 2008 14:17:37 +0400 Subject: [PATCH 0594/1024] RFKILL: allow one to specify led trigger name Allow the rfkill driver to specify led trigger name. By default it still defaults to the name of rfkill switch. Signed-off-by: Dmitry Baryshkov Acked-by: Henrique de Moraes Holschuh Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index c6f2f388cb7..5c24f364718 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -589,7 +589,8 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill) #ifdef CONFIG_RFKILL_LEDS int error; - rfkill->led_trigger.name = rfkill->dev.bus_id; + if (!rfkill->led_trigger.name) + rfkill->led_trigger.name = rfkill->dev.bus_id; error = led_trigger_register(&rfkill->led_trigger); if (error) rfkill->led_trigger.name = NULL; -- GitLab From 96185664f10e79d038c084305d3cacff9b52204f Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 22 Jul 2008 14:21:59 +0400 Subject: [PATCH 0595/1024] RFKILL: set the status of the leds on activation. Provide default activate function to set the state of the led when the led becomes bound to the trigger Signed-off-by: Dmitry Baryshkov Acked-by: Ivo van Doorn Acked-by: Henrique de Moraes Holschuh Signed-off-by: John W. Linville --- net/rfkill/rfkill.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index 5c24f364718..d2d45655cd1 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -105,6 +105,16 @@ static void rfkill_led_trigger(struct rfkill *rfkill, #endif /* CONFIG_RFKILL_LEDS */ } +#ifdef CONFIG_RFKILL_LEDS +static void rfkill_led_trigger_activate(struct led_classdev *led) +{ + struct rfkill *rfkill = container_of(led->trigger, + struct rfkill, led_trigger); + + rfkill_led_trigger(rfkill, rfkill->state); +} +#endif /* CONFIG_RFKILL_LEDS */ + static void notify_rfkill_state_change(struct rfkill *rfkill) { blocking_notifier_call_chain(&rfkill_notifier_list, @@ -591,6 +601,8 @@ static void rfkill_led_trigger_register(struct rfkill *rfkill) if (!rfkill->led_trigger.name) rfkill->led_trigger.name = rfkill->dev.bus_id; + if (!rfkill->led_trigger.activate) + rfkill->led_trigger.activate = rfkill_led_trigger_activate; error = led_trigger_register(&rfkill->led_trigger); if (error) rfkill->led_trigger.name = NULL; -- GitLab From dc1968e7b7862bcd2d358c1be6119c011992bdd2 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 23 Jul 2008 13:17:34 +0200 Subject: [PATCH 0596/1024] Ath5k: mask out unneeded interrupts Mask out previously demanded interrupt flags because we set new ones. Don't allow mixing them after switch from sta to ibss and vice versa. Signed-off-by: Jiri Slaby Cc: Nick Kossifidis Cc: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index ff3fad794b6..ebf19bc11f5 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -2170,6 +2170,7 @@ ath5k_beacon_config(struct ath5k_softc *sc) ath5k_hw_set_intr(ah, 0); sc->bmisscount = 0; + sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA); if (sc->opmode == IEEE80211_IF_TYPE_STA) { sc->imask |= AR5K_INT_BMISS; -- GitLab From f8e79ddd31c3615ddca26b9a469c44a7adbd4e13 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 24 Jul 2008 18:46:44 +0300 Subject: [PATCH 0597/1024] mac80211: fix fragmentation kludge This patch make mac80211 transmit correctly fragmented packet after queue was stopped Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- net/mac80211/ieee80211_i.h | 1 + net/mac80211/tx.c | 17 ++++++++++++----- net/mac80211/util.c | 1 + 3 files changed, 14 insertions(+), 5 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index a4f9a832722..a2e200f9811 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -586,6 +586,7 @@ struct ieee80211_local { struct timer_list sta_cleanup; unsigned long queues_pending[BITS_TO_LONGS(IEEE80211_MAX_QUEUES)]; + unsigned long queues_pending_run[BITS_TO_LONGS(IEEE80211_MAX_QUEUES)]; struct ieee80211_tx_stored_packet pending_packet[IEEE80211_MAX_QUEUES]; struct tasklet_struct tx_pending_tasklet; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 69019e94387..771ec68b848 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1060,13 +1060,14 @@ static int ieee80211_tx_prepare(struct ieee80211_tx_data *tx, static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb, struct ieee80211_tx_data *tx) { - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_tx_info *info; int ret, i; - if (netif_subqueue_stopped(local->mdev, skb)) - return IEEE80211_TX_AGAIN; - if (skb) { + if (netif_subqueue_stopped(local->mdev, skb)) + return IEEE80211_TX_AGAIN; + info = IEEE80211_SKB_CB(skb); + ieee80211_dump_frame(wiphy_name(local->hw.wiphy), "TX to low-level driver", skb); ret = local->ops->tx(local_to_hw(local), skb); @@ -1215,6 +1216,7 @@ retry: if (ret == IEEE80211_TX_FRAG_AGAIN) skb = NULL; + set_bit(queue, local->queues_pending); smp_mb(); /* @@ -1708,14 +1710,19 @@ void ieee80211_tx_pending(unsigned long data) netif_tx_lock_bh(dev); for (i = 0; i < ieee80211_num_regular_queues(&local->hw); i++) { /* Check that this queue is ok */ - if (__netif_subqueue_stopped(local->mdev, i)) + if (__netif_subqueue_stopped(local->mdev, i) && + !test_bit(i, local->queues_pending_run)) continue; if (!test_bit(i, local->queues_pending)) { + clear_bit(i, local->queues_pending_run); ieee80211_wake_queue(&local->hw, i); continue; } + clear_bit(i, local->queues_pending_run); + netif_start_subqueue(local->mdev, i); + store = &local->pending_packet[i]; tx.extra_frag = store->extra_frag; tx.num_extra_frag = store->num_extra_frag; diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 19f85e1b369..0d463c80c40 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -361,6 +361,7 @@ void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue) struct ieee80211_local *local = hw_to_local(hw); if (test_bit(queue, local->queues_pending)) { + set_bit(queue, local->queues_pending_run); tasklet_schedule(&local->tx_pending_tasklet); } else { netif_wake_subqueue(local->mdev, queue); -- GitLab From 8de394f60235a825b32f30441290a44251eca45d Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Thu, 24 Jul 2008 18:22:55 +0200 Subject: [PATCH 0598/1024] ath5k: remove obsolete declaration of struct ieee80211_hw_mode Signed-off-by: Helmut Schaa Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/debug.h | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/ath5k/debug.h b/drivers/net/wireless/ath5k/debug.h index 2cf8d18b10e..ffc52939330 100644 --- a/drivers/net/wireless/ath5k/debug.h +++ b/drivers/net/wireless/ath5k/debug.h @@ -63,7 +63,6 @@ struct ath5k_softc; struct ath5k_hw; -struct ieee80211_hw_mode; struct sk_buff; struct ath5k_buf; -- GitLab From 143b09efb74efd3328f57d7a4bd6d7663c1d6497 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 24 Jul 2008 21:33:42 +0300 Subject: [PATCH 0599/1024] iwlwifi: don't stop queue in the middle of fragmented packet This patch avoids stopping queue in the middle of the fragmented packet. It is required that there will be ~10 (max packet/min fragment) or 16 (4 bits of frag number) free tfds all the time. Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-tx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index f72cd0bf6aa..0182e4da8e3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -962,16 +962,16 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) if (ret) return ret; - if ((iwl_queue_space(q) < q->high_mark) - && priv->mac80211_registered) { + if ((iwl_queue_space(q) < q->high_mark) && priv->mac80211_registered) { if (wait_write_ptr) { spin_lock_irqsave(&priv->lock, flags); txq->need_update = 1; iwl_txq_update_write_ptr(priv, txq); spin_unlock_irqrestore(&priv->lock, flags); + } else { + ieee80211_stop_queue(priv->hw, + skb_get_queue_mapping(skb)); } - - ieee80211_stop_queue(priv->hw, skb_get_queue_mapping(skb)); } return 0; -- GitLab From 7c7e6af37dad30632103497a72a1273d18ec55fe Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Fri, 25 Jul 2008 19:08:11 +0200 Subject: [PATCH 0600/1024] Rtl8187 PATCH add usb ID for asus wireless link This patch from Davide Cavalca adds a usb ID for an rtl8187L device. Signed-off-by: John W. Linville --- drivers/net/wireless/Kconfig | 1 + drivers/net/wireless/rtl8187_dev.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 91fc2c765d9..4c7ff61a1a9 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -649,6 +649,7 @@ config RTL8187 Trendnet TEW-424UB ASUS P5B Deluxe Toshiba Satellite Pro series of laptops + Asus Wireless Link Thanks to Realtek for their support! diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 177988efd66..461aa26164c 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -31,6 +31,8 @@ MODULE_DESCRIPTION("RTL8187/RTL8187B USB wireless driver"); MODULE_LICENSE("GPL"); static struct usb_device_id rtl8187_table[] __devinitdata = { + /* Asus */ + {USB_DEVICE(0x0b05, 0x171d), .driver_info = DEVICE_RTL8187}, /* Realtek */ {USB_DEVICE(0x0bda, 0x8187), .driver_info = DEVICE_RTL8187}, {USB_DEVICE(0x0bda, 0x8189), .driver_info = DEVICE_RTL8187B}, -- GitLab From d2b690714cd7d328561bfb9bf941edd6a3316a85 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 27 Jul 2008 15:06:05 +0200 Subject: [PATCH 0601/1024] rt2x00: Fix access permissions on debugfs files Although most rt2x00 debugfs files don't contain information which could compromise network security, it is better to set the access permissions to root only. This will be required when HW crypto is implemented, because it could be possible to read the HW key from the registers. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00debug.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 300cf061035..6bee1d611bb 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -372,9 +372,6 @@ static ssize_t rt2x00debug_write_##__name(struct file *file, \ if (*offset) \ return 0; \ \ - if (!capable(CAP_NET_ADMIN)) \ - return -EPERM; \ - \ if (intf->offset_##__name >= debug->__name.word_count) \ return -EINVAL; \ \ @@ -454,7 +451,7 @@ static struct dentry *rt2x00debug_create_file_driver(const char *name, data += sprintf(data, "compiled: %s %s\n", __DATE__, __TIME__); blob->size = strlen(blob->data); - return debugfs_create_blob(name, S_IRUGO, intf->driver_folder, blob); + return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob); } static struct dentry *rt2x00debug_create_file_chipset(const char *name, @@ -482,7 +479,7 @@ static struct dentry *rt2x00debug_create_file_chipset(const char *name, data += sprintf(data, "rf length: %d\n", debug->rf.word_count); blob->size = strlen(blob->data); - return debugfs_create_blob(name, S_IRUGO, intf->driver_folder, blob); + return debugfs_create_blob(name, S_IRUSR, intf->driver_folder, blob); } void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) @@ -517,7 +514,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) if (IS_ERR(intf->chipset_entry)) goto exit; - intf->dev_flags = debugfs_create_file("dev_flags", S_IRUGO, + intf->dev_flags = debugfs_create_file("dev_flags", S_IRUSR, intf->driver_folder, intf, &rt2x00debug_fop_dev_flags); if (IS_ERR(intf->dev_flags)) @@ -532,7 +529,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) ({ \ (__intf)->__name##_off_entry = \ debugfs_create_u32(__stringify(__name) "_offset", \ - S_IRUGO | S_IWUSR, \ + S_IRUSR | S_IWUSR, \ (__intf)->register_folder, \ &(__intf)->offset_##__name); \ if (IS_ERR((__intf)->__name##_off_entry)) \ @@ -540,7 +537,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) \ (__intf)->__name##_val_entry = \ debugfs_create_file(__stringify(__name) "_value", \ - S_IRUGO | S_IWUSR, \ + S_IRUSR | S_IWUSR, \ (__intf)->register_folder, \ (__intf), &rt2x00debug_fop_##__name);\ if (IS_ERR((__intf)->__name##_val_entry)) \ @@ -560,7 +557,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) goto exit; intf->queue_frame_dump_entry = - debugfs_create_file("dump", S_IRUGO, intf->queue_folder, + debugfs_create_file("dump", S_IRUSR, intf->queue_folder, intf, &rt2x00debug_fop_queue_dump); if (IS_ERR(intf->queue_frame_dump_entry)) goto exit; @@ -569,7 +566,7 @@ void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) init_waitqueue_head(&intf->frame_dump_waitqueue); intf->queue_stats_entry = - debugfs_create_file("queue", S_IRUGO, intf->queue_folder, + debugfs_create_file("queue", S_IRUSR, intf->queue_folder, intf, &rt2x00debug_fop_queue_stats); return; -- GitLab From ada662f3eb6231ab27f5e6366d4e5c395d25edd3 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 27 Jul 2008 15:06:21 +0200 Subject: [PATCH 0602/1024] rt2x00: Fix partial antenna configuration The if-statement to determine the new TX/RX antenna configuration was incomplete. It lacks the general else-clause when the antenna wasn't changed. This is a correct event, since it can occur when only one of the antenna's has been changed or when the new configuration is being forced (like when the interface has just been added). Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00config.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 3f89516e833..d134c3be539 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -254,6 +254,8 @@ config: libconf.ant.rx = default_ant->rx; else if (active_ant->rx == ANTENNA_SW_DIVERSITY) libconf.ant.rx = ANTENNA_B; + else + libconf.ant.rx = active_ant->rx; if (conf->antenna_sel_tx) libconf.ant.tx = conf->antenna_sel_tx; @@ -261,6 +263,8 @@ config: libconf.ant.tx = default_ant->tx; else if (active_ant->tx == ANTENNA_SW_DIVERSITY) libconf.ant.tx = ANTENNA_B; + else + libconf.ant.tx = active_ant->tx; } if (flags & CONFIG_UPDATE_SLOT_TIME) { -- GitLab From e6d3e902088ac5da77b074f513e3cb80422ff471 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 27 Jul 2008 15:06:50 +0200 Subject: [PATCH 0603/1024] rt2x00: rt61pci needs another millisecond after firmware upload After the hardware has indicated the firmware upload has completed and the device is ready, we should wait another millisecond to make sure the device is really ready to continue. Without this timout, bringing the interface down and up again will fail due to incorrect register initialization. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt61pci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index fbe2a652e01..087e90b328c 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1003,6 +1003,11 @@ static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, return -EBUSY; } + /* + * Hardware needs another millisecond before it is ready. + */ + msleep(1); + /* * Reset MAC and BBP registers. */ -- GitLab From 8d8acd46fb7e962ac04baef5a118d431fae6b0f6 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 28 Jul 2008 10:20:12 +0200 Subject: [PATCH 0604/1024] rt2x00: Fix VGC lower bound initialization When the EEPROM_BBPTUNE_VGC word is valid, we should override EEPROM_BBPTUNE_VGCLOWER field with the BBP value. And we should _not_ do that when EEPROM_BBPTUNE_R17 is valid. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2500usb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 3078417b326..c6f6eb6e17a 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1376,6 +1376,9 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp); rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word); + } else { + rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp); + rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); } rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word); @@ -1384,9 +1387,6 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41); rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word); EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word); - } else { - rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCLOWER, bbp); - rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word); } rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word); -- GitLab From d4764b29b6e0f1608e397930677928e5a3f62bba Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Mon, 28 Jul 2008 10:21:16 +0200 Subject: [PATCH 0605/1024] rt2x00: Sequence counter should be protected in irqsave The sequence counter can be accessed in IRQ context, which means the lock protecting the counter should be irqsave. To prevent making the entire intf->lock irqsave without reason, create a new lock which only protects the sequence counter. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 6 ++++++ drivers/net/wireless/rt2x00/rt2x00mac.c | 1 + drivers/net/wireless/rt2x00/rt2x00queue.c | 5 +++-- 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index db2dc976d83..8b10ea41b20 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -368,6 +368,12 @@ struct rt2x00_intf { #define DELAYED_CONFIG_ERP 0x00000002 #define DELAYED_LED_ASSOC 0x00000004 + /* + * Software sequence counter, this is only required + * for hardware which doesn't support hardware + * sequence counting. + */ + spinlock_t seqlock; u16 seqno; }; diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index c3ee4ecba79..bd422fd6a89 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -247,6 +247,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, rt2x00dev->intf_sta_count++; spin_lock_init(&intf->lock); + spin_lock_init(&intf->seqlock); intf->beacon = entry; if (conf->type == IEEE80211_IF_TYPE_AP) diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 3b27f6aa860..898cdd7f57d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -128,6 +128,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, unsigned int data_length; unsigned int duration; unsigned int residual; + unsigned long irqflags; memset(txdesc, 0, sizeof(*txdesc)); @@ -213,14 +214,14 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, * sequence counter given by mac80211. */ if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { - spin_lock(&intf->lock); + spin_lock_irqsave(&intf->seqlock, irqflags); if (test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)) intf->seqno += 0x10; hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); hdr->seq_ctrl |= cpu_to_le16(intf->seqno); - spin_unlock(&intf->lock); + spin_unlock_irqrestore(&intf->seqlock, irqflags); __set_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags); } -- GitLab From 3b72b01d3ab623c296df49f2d71d40a38bcfb4b3 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 29 Jul 2008 13:50:39 -0400 Subject: [PATCH 0606/1024] libertas: only enable rtap with mesh firmware Since only mesh-enabled firmware has the CMD_802_11_MONITOR_MODE on which the rtap functionality depends, only expose the rtap functionality when mesh is also available. Signed-off-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/main.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index 14d5d61cec4..bd32ac0b4e0 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -297,9 +297,7 @@ static ssize_t lbs_rtap_set(struct device *dev, lbs_add_rtap(priv); } priv->monitormode = monitor_mode; - } - - else { + } else { if (!priv->monitormode) return strlen(buf); priv->monitormode = 0; @@ -1242,8 +1240,6 @@ int lbs_start_card(struct lbs_private *priv) lbs_pr_err("cannot register ethX device\n"); goto done; } - if (device_create_file(&dev->dev, &dev_attr_lbs_rtap)) - lbs_pr_err("cannot register lbs_rtap attribute\n"); lbs_update_channel(priv); @@ -1275,6 +1271,13 @@ int lbs_start_card(struct lbs_private *priv) if (device_create_file(&dev->dev, &dev_attr_lbs_mesh)) lbs_pr_err("cannot register lbs_mesh attribute\n"); + + /* While rtap isn't related to mesh, only mesh-enabled + * firmware implements the rtap functionality via + * CMD_802_11_MONITOR_MODE. + */ + if (device_create_file(&dev->dev, &dev_attr_lbs_rtap)) + lbs_pr_err("cannot register lbs_rtap attribute\n"); } } @@ -1306,9 +1309,9 @@ void lbs_stop_card(struct lbs_private *priv) netif_carrier_off(priv->dev); lbs_debugfs_remove_one(priv); - device_remove_file(&dev->dev, &dev_attr_lbs_rtap); if (priv->mesh_tlv) { device_remove_file(&dev->dev, &dev_attr_lbs_mesh); + device_remove_file(&dev->dev, &dev_attr_lbs_rtap); } /* Flush pending command nodes */ -- GitLab From bf4634afd8bb72936d2d56425ec792ca1bfa92a2 Mon Sep 17 00:00:00 2001 From: Peter Chubb Date: Thu, 31 Jul 2008 10:56:34 +1000 Subject: [PATCH 0607/1024] rt2500pci: restoring missing line In kernel version 2.6.26-rc9 my wireless LAN card worked; but in the released 2.6.26, my RaLink rt2500 card wouldn't associate. Git-bisect led me to this patch: 61486e0f68d1f8966c09b734566a187d42d65c54 rt2x00: Remove ieee80211_tx_control argument from write_tx_desc() I believe that there is a problem with that patch --- it (inadvertantly) removes an extra line of code, that used to set the DATABYTE_COUNT field. This patch reinstates that line, and with it my card works again. Signed-off-by: Peter Chubb Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2500pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index aa6dfb811c7..181a146b476 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1220,6 +1220,7 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); rt2x00_desc_write(txd, 0, word); } -- GitLab From 7dcdd073bf78bb6958bbc12a1a47754a0f3c4721 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 31 Jul 2008 19:30:48 -0500 Subject: [PATCH 0608/1024] rtl8187: Fix lockups due to concurrent access to config routine Some users of the RTL8187B have experienced difficulties since commit 49292d56352a6ab90d04c3448dd8b6106dfef2d6 that introduced the power management wext hooks. This difficulty has not made much sense until it was realized that it was possible for mac80211 to make a call to the config routine while that routine was already being executed. On this device, it is necessary to loopback the TX when changing channels. Unless this is properly restored, the device will lockup. A mutex now protects the device state, and the private data in several places. The problem was found by Herton Ronaldo Krzesinski , who also suggested this type of fix. Signed-off-by: Larry Finger Acked-by: Herton Ronaldo Krzesinski Acked-by: Hin-Tak Leung Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187.h | 4 ++++ drivers/net/wireless/rtl8187_dev.c | 15 ++++++++++++++- 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h index 1b0d750f662..5a9515c9996 100644 --- a/drivers/net/wireless/rtl8187.h +++ b/drivers/net/wireless/rtl8187.h @@ -94,6 +94,10 @@ struct rtl8187_priv { const struct rtl818x_rf_ops *rf; struct ieee80211_vif *vif; int mode; + /* The mutex protects the TX loopback state. + * Any attempt to set channels concurrently locks the device. + */ + struct mutex conf_mutex; /* rtl8187 specific */ struct ieee80211_channel channels[14]; diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 461aa26164c..57376fb993e 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -728,6 +728,7 @@ static int rtl8187_start(struct ieee80211_hw *dev) if (ret) return ret; + mutex_lock(&priv->conf_mutex); if (priv->is_rtl8187b) { reg = RTL818X_RX_CONF_MGMT | RTL818X_RX_CONF_DATA | @@ -749,6 +750,7 @@ static int rtl8187_start(struct ieee80211_hw *dev) (7 << 0 /* long retry limit */) | (7 << 21 /* MAX TX DMA */)); rtl8187_init_urbs(dev); + mutex_unlock(&priv->conf_mutex); return 0; } @@ -792,6 +794,7 @@ static int rtl8187_start(struct ieee80211_hw *dev) reg |= RTL818X_CMD_TX_ENABLE; reg |= RTL818X_CMD_RX_ENABLE; rtl818x_iowrite8(priv, &priv->map->CMD, reg); + mutex_unlock(&priv->conf_mutex); return 0; } @@ -803,6 +806,7 @@ static void rtl8187_stop(struct ieee80211_hw *dev) struct sk_buff *skb; u32 reg; + mutex_lock(&priv->conf_mutex); rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0); reg = rtl818x_ioread8(priv, &priv->map->CMD); @@ -822,7 +826,7 @@ static void rtl8187_stop(struct ieee80211_hw *dev) usb_kill_urb(info->urb); kfree_skb(skb); } - return; + mutex_unlock(&priv->conf_mutex); } static int rtl8187_add_interface(struct ieee80211_hw *dev, @@ -842,6 +846,7 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev, return -EOPNOTSUPP; } + mutex_lock(&priv->conf_mutex); priv->vif = conf->vif; rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); @@ -850,6 +855,7 @@ static int rtl8187_add_interface(struct ieee80211_hw *dev, ((u8 *)conf->mac_addr)[i]); rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL); + mutex_unlock(&priv->conf_mutex); return 0; } @@ -857,8 +863,10 @@ static void rtl8187_remove_interface(struct ieee80211_hw *dev, struct ieee80211_if_init_conf *conf) { struct rtl8187_priv *priv = dev->priv; + mutex_lock(&priv->conf_mutex); priv->mode = IEEE80211_IF_TYPE_MNTR; priv->vif = NULL; + mutex_unlock(&priv->conf_mutex); } static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) @@ -866,6 +874,7 @@ static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) struct rtl8187_priv *priv = dev->priv; u32 reg; + mutex_lock(&priv->conf_mutex); reg = rtl818x_ioread32(priv, &priv->map->TX_CONF); /* Enable TX loopback on MAC level to avoid TX during channel * changes, as this has be seen to causes problems and the @@ -898,6 +907,7 @@ static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100); rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100); rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100); + mutex_unlock(&priv->conf_mutex); return 0; } @@ -909,6 +919,7 @@ static int rtl8187_config_interface(struct ieee80211_hw *dev, int i; u8 reg; + mutex_lock(&priv->conf_mutex); for (i = 0; i < ETH_ALEN; i++) rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]); @@ -922,6 +933,7 @@ static int rtl8187_config_interface(struct ieee80211_hw *dev, rtl818x_iowrite8(priv, &priv->map->MSR, reg); } + mutex_unlock(&priv->conf_mutex); return 0; } @@ -1189,6 +1201,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, printk(KERN_ERR "rtl8187: Cannot register device\n"); goto err_free_dev; } + mutex_init(&priv->conf_mutex); printk(KERN_INFO "%s: hwaddr %s, %s V%d + %s\n", wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr), -- GitLab From fb55d887c5bd9054ec069534e1ef9eb8d9a983c6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 31 Jul 2008 19:02:06 +0200 Subject: [PATCH 0609/1024] ipw2200 - Fix bad ipw_write8() macro ipw_write8() can't be used alone with a loop because of a wrong definition. CC [M] drivers/net/wireless/ipw2200.o drivers/net/wireless/ipw2200.c: In function 'ipw_ethtool_set_eeprom': drivers/net/wireless/ipw2200.c:10579: warning: array subscript is above array bounds drivers/net/wireless/ipw2200.c: In function 'ipw_load': drivers/net/wireless/ipw2200.c:2663: warning: array subscript is above array bounds Add missing do {} while (0) to fix them. Signed-off-by: Takashi Iwai Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2200.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 1acfbcd3703..9509fd2a25f 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -305,9 +305,10 @@ static inline void ipw_write_reg32(struct ipw_priv *a, u32 b, u32 c) #define _ipw_write8(ipw, ofs, val) writeb((val), (ipw)->hw_base + (ofs)) /* 8-bit direct write (for low 4K of SRAM/regs), with debug wrapper */ -#define ipw_write8(ipw, ofs, val) \ +#define ipw_write8(ipw, ofs, val) do { \ IPW_DEBUG_IO("%s %d: write_direct8(0x%08X, 0x%08X)\n", __FILE__, __LINE__, (u32)(ofs), (u32)(val)); \ - _ipw_write8(ipw, ofs, val) + _ipw_write8(ipw, ofs, val); \ + } while (0) /* 16-bit direct write (low 4K) */ #define _ipw_write16(ipw, ofs, val) writew((val), (ipw)->hw_base + (ofs)) -- GitLab From 3d0f823953e6b5aa36fc098de2d27e15da220974 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 31 Jul 2008 19:03:10 +0200 Subject: [PATCH 0610/1024] prism54 - Use offsetof() Use the standard offsetof() macro to fix a compile warning below: CC [M] drivers/net/wireless/prism54/isl_ioctl.o drivers/net/wireless/prism54/isl_ioctl.c: In function 'prism2_ioctl_set_generic_element': drivers/net/wireless/prism54/isl_ioctl.c:2658: warning: cast from pointer to integer of different size Signed-off-by: Takashi Iwai Signed-off-by: John W. Linville --- drivers/net/wireless/prism54/isl_ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index 97fa14e0a47..3d75a7137d3 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -2518,7 +2518,7 @@ enum { #define PRISM2_HOSTAPD_MAX_BUF_SIZE 1024 #define PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN \ -((int) (&((struct prism2_hostapd_param *) 0)->u.generic_elem.data)) + offsetof(struct prism2_hostapd_param, u.generic_elem.data) /* Maximum length for algorithm names (-1 for nul termination) * used in ioctl() */ -- GitLab From 56decd3c5758b0d776c073f65f777beb7a05ac0a Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Fri, 1 Aug 2008 12:54:27 +0300 Subject: [PATCH 0611/1024] iwl3945: Fix statistics in monitor mode iwl3945_rx_reply_rx was sending packets too early to mac80211, before updating signal strength/quality. This resulted in garbage power levels. Signed-off-by: Maxim Levitsky Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index a51e0eaa133..56a9361a847 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -710,10 +710,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, return; } - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { - iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status); - return; - } + /* Convert 3945's rssi indicator to dBm */ rx_status.signal = rx_stats->rssi - IWL_RSSI_OFFSET; @@ -775,6 +772,11 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, priv->last_rx_noise = rx_status.noise; } + if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { + iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status); + return; + } + switch (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FTYPE) { case IEEE80211_FTYPE_MGMT: switch (le16_to_cpu(header->frame_control) & -- GitLab From daf423db3b6afd90ecdd776dbc32c0b57cc78edb Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 30 Jul 2008 10:29:39 +1000 Subject: [PATCH 0612/1024] kdump: sh: parse elfcorehdr command line argument A quick cut and paste from other architectures to allow SH to parse the elfcorehdr command line argument which is required for both is_kdump_kernel() and vmcore to function. (the former is as yet unused on SH). Tested compilation only Signed-off-by: Simon Horman Signed-off-by: Paul Mundt --- arch/sh/kernel/setup.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 6339d0c9571..a35207655e7 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -286,6 +287,25 @@ static void __init setup_memory(void) extern void __init setup_memory(void); #endif +/* + * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by + * is_kdump_kernel() to determine if we are booting after a panic. Hence + * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE. + */ +#ifdef CONFIG_CRASH_DUMP +/* elfcorehdr= specifies the location of elf core header + * stored by the crashed kernel. + */ +static int __init parse_elfcorehdr(char *arg) +{ + if (!arg) + return -EINVAL; + elfcorehdr_addr = memparse(arg, &arg); + return 0; +} +early_param("elfcorehdr", parse_elfcorehdr); +#endif + void __init setup_arch(char **cmdline_p) { enable_mmu(); -- GitLab From cec3fd3e2a7cacf37e2bd6d9fa915337245cc563 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 13:11:26 +0900 Subject: [PATCH 0613/1024] sh: Tidy up the _TIF work masks, and fix syscall trace bug on singlestep. Signed-off-by: Paul Mundt --- arch/sh/include/asm/thread_info.h | 40 +++++++++++++++++++++---------- arch/sh/kernel/cpu/sh5/entry.S | 2 +- arch/sh/kernel/entry-common.S | 4 ++-- 3 files changed, 31 insertions(+), 15 deletions(-) diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h index eeb4c747119..c05b1afd132 100644 --- a/arch/sh/include/asm/thread_info.h +++ b/arch/sh/include/asm/thread_info.h @@ -123,18 +123,34 @@ static inline struct thread_info *current_thread_info(void) #define TIF_MEMDIE 18 #define TIF_FREEZE 19 -#define _TIF_SYSCALL_TRACE (1<flags ! r8: current_thread_info - tst #_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT, r0 + tst #_TIF_WORK_SYSCALL_MASK, r0 bt/s work_pending tst #_TIF_NEED_RESCHED, r0 #ifdef CONFIG_TRACE_IRQFLAGS @@ -351,7 +351,7 @@ ENTRY(system_call) ! get_current_thread_info r8, r10 mov.l @(TI_FLAGS,r8), r8 - mov #(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT), r10 + mov #_TIF_WORK_SYSCALL_MASK, r10 tst r10, r8 bf syscall_trace_entry ! -- GitLab From c4637d475170ca0d99973efd07df727012db6cd1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 15:30:52 +0900 Subject: [PATCH 0614/1024] sh: seccomp support. This hooks up the seccomp thread flag and associated callback from the syscall tracer. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 17 +++++++++++++++++ arch/sh/include/asm/seccomp.h | 10 ++++++++++ arch/sh/include/asm/thread_info.h | 6 ++++-- arch/sh/kernel/ptrace_32.c | 3 +++ arch/sh/kernel/ptrace_64.c | 3 +++ 5 files changed, 37 insertions(+), 2 deletions(-) create mode 100644 arch/sh/include/asm/seccomp.h diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index cb992c3d6b7..0ae541107f3 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -483,6 +483,23 @@ config CRASH_DUMP For more details see Documentation/kdump/kdump.txt +config SECCOMP + bool "Enable seccomp to safely compute untrusted bytecode" + depends on PROC_FS + default y + help + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via prctl, it cannot be disabled and the task is only + allowed to execute a few safe syscalls defined by each seccomp + mode. + + If unsure, say N. + config SMP bool "Symmetric multi-processing support" depends on SYS_SUPPORTS_SMP diff --git a/arch/sh/include/asm/seccomp.h b/arch/sh/include/asm/seccomp.h new file mode 100644 index 00000000000..3280ed3802e --- /dev/null +++ b/arch/sh/include/asm/seccomp.h @@ -0,0 +1,10 @@ +#ifndef __ASM_SECCOMP_H + +#include + +#define __NR_seccomp_read __NR_read +#define __NR_seccomp_write __NR_write +#define __NR_seccomp_exit __NR_exit +#define __NR_seccomp_sigreturn __NR_rt_sigreturn + +#endif /* __ASM_SECCOMP_H */ diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h index c05b1afd132..03d1e386670 100644 --- a/arch/sh/include/asm/thread_info.h +++ b/arch/sh/include/asm/thread_info.h @@ -117,7 +117,8 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ #define TIF_RESTORE_SIGMASK 3 /* restore signal mask in do_signal() */ #define TIF_SINGLESTEP 4 /* singlestepping active */ -#define TIF_SYSCALL_AUDIT 5 +#define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */ +#define TIF_SECCOMP 6 /* secure computing */ #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 @@ -129,6 +130,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SECCOMP (1 << TIF_SECCOMP) #define _TIF_USEDFPU (1 << TIF_USEDFPU) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_FREEZE (1 << TIF_FREEZE) @@ -141,7 +143,7 @@ static inline struct thread_info *current_thread_info(void) /* work to do in syscall trace */ #define _TIF_WORK_SYSCALL_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \ - _TIF_SYSCALL_AUDIT) + _TIF_SYSCALL_AUDIT | _TIF_SECCOMP) /* work to do on any return to u-space */ #define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \ diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index 2bc72def5cf..e9bd4b2aa9c 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -276,6 +277,8 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) { struct task_struct *tsk = current; + secure_computing(regs->regs[0]); + if (unlikely(current->audit_context) && entryexit) audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]), regs->regs[0]); diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index d453c47dc52..7d877626095 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -277,6 +278,8 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int entryexit) { struct task_struct *tsk = current; + secure_computing(regs->regs[9]); + if (unlikely(current->audit_context) && entryexit) audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]), regs->regs[9]); -- GitLab From c459dbf294b4a3d70490a468a7ca3907fb2c2f57 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 19:09:31 +0900 Subject: [PATCH 0615/1024] sh: ptrace single stepping cleanups. This converts the single stepping done by sh/sh64 ptrace implementations to use the generic user_enable/disable_single_step(), and subsequently rips out a lot of ptrace request cases that are now handled generically. Signed-off-by: Paul Mundt --- arch/sh/include/asm/ptrace.h | 9 ++++ arch/sh/kernel/ptrace_32.c | 93 +++++++----------------------------- arch/sh/kernel/ptrace_64.c | 77 +++++------------------------ 3 files changed, 39 insertions(+), 140 deletions(-) diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index 643ab5a7cf3..b86aeabba61 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -104,6 +104,15 @@ struct pt_dspregs { extern void show_regs(struct pt_regs *); +/* + * These are defined as per linux/ptrace.h. + */ +struct task_struct; + +#define arch_has_single_step() (1) +extern void user_enable_single_step(struct task_struct *); +extern void user_disable_single_step(struct task_struct *); + #ifdef CONFIG_SH_DSP #define task_pt_regs(task) \ ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index e9bd4b2aa9c..ff66f97c564 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -58,7 +58,23 @@ static inline int put_stack_long(struct task_struct *task, int offset, return 0; } -static void ptrace_disable_singlestep(struct task_struct *child) +void user_enable_single_step(struct task_struct *child) +{ + struct pt_regs *regs = task_pt_regs(child); + long pc; + + pc = get_stack_long(child, (long)®s->pc); + + /* Next scheduling will set up UBC */ + if (child->thread.ubc_pc == 0) + ubc_usercnt += 1; + + child->thread.ubc_pc = pc; + + set_tsk_thread_flag(child, TIF_SINGLESTEP); +} + +void user_disable_single_step(struct task_struct *child) { clear_tsk_thread_flag(child, TIF_SINGLESTEP); @@ -82,7 +98,7 @@ static void ptrace_disable_singlestep(struct task_struct *child) */ void ptrace_disable(struct task_struct *child) { - ptrace_disable_singlestep(child); + user_disable_single_step(child); } long arch_ptrace(struct task_struct *child, long request, long addr, long data) @@ -91,12 +107,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) int ret; switch (request) { - /* when I and D space are separate, these will need to be fixed. */ - case PTRACE_PEEKTEXT: /* read word at location addr. */ - case PTRACE_PEEKDATA: - ret = generic_ptrace_peekdata(child, addr, data); - break; - /* read the word at location addr in the USER area. */ case PTRACE_PEEKUSR: { unsigned long tmp; @@ -126,12 +136,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } - /* when I and D space are separate, this will have to be fixed. */ - case PTRACE_POKETEXT: /* write the word at location addr. */ - case PTRACE_POKEDATA: - ret = generic_ptrace_pokedata(child, addr, data); - break; - case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ ret = -EIO; if ((addr & 3) || addr < 0 || @@ -152,67 +156,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } break; - case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ - case PTRACE_CONT: { /* restart after signal. */ - ret = -EIO; - if (!valid_signal(data)) - break; - if (request == PTRACE_SYSCALL) - set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - else - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - - ptrace_disable_singlestep(child); - - child->exit_code = data; - wake_up_process(child); - ret = 0; - break; - } - -/* - * make the child exit. Best I can do is send it a sigkill. - * perhaps it should be put in the status that it wants to - * exit. - */ - case PTRACE_KILL: { - ret = 0; - if (child->exit_state == EXIT_ZOMBIE) /* already dead */ - break; - ptrace_disable_singlestep(child); - child->exit_code = SIGKILL; - wake_up_process(child); - break; - } - - case PTRACE_SINGLESTEP: { /* set the trap flag. */ - long pc; - struct pt_regs *regs = NULL; - - ret = -EIO; - if (!valid_signal(data)) - break; - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - if ((child->ptrace & PT_DTRACE) == 0) { - /* Spurious delayed TF traps may occur */ - child->ptrace |= PT_DTRACE; - } - - pc = get_stack_long(child, (long)®s->pc); - - /* Next scheduling will set up UBC */ - if (child->thread.ubc_pc == 0) - ubc_usercnt += 1; - child->thread.ubc_pc = pc; - - set_tsk_thread_flag(child, TIF_SINGLESTEP); - child->exit_code = data; - /* give it a chance to run. */ - wake_up_process(child); - ret = 0; - break; - } - #ifdef CONFIG_SH_DSP case PTRACE_GETDSPREGS: { unsigned long dp; diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index 7d877626095..108f3962e39 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -121,18 +121,23 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data) return 0; } +void user_enable_single_step(struct task_struct *child) +{ + struct pt_regs *regs = child->thread.uregs; + + regs->sr |= SR_SSTEP; /* auto-resetting upon exception */ +} + +void user_disable_single_step(struct task_struct *child) +{ + regs->sr &= ~SR_SSTEP; +} long arch_ptrace(struct task_struct *child, long request, long addr, long data) { int ret; switch (request) { - /* when I and D space are separate, these will need to be fixed. */ - case PTRACE_PEEKTEXT: /* read word at location addr. */ - case PTRACE_PEEKDATA: - ret = generic_ptrace_peekdata(child, addr, data); - break; - /* read the word at location addr in the USER area. */ case PTRACE_PEEKUSR: { unsigned long tmp; @@ -155,12 +160,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } - /* when I and D space are separate, this will have to be fixed. */ - case PTRACE_POKETEXT: /* write the word at location addr. */ - case PTRACE_POKEDATA: - ret = generic_ptrace_pokedata(child, addr, data); - break; - case PTRACE_POKEUSR: /* write the word at location addr in the USER area. We must disallow any changes to certain SR bits or u_fpvalid, since @@ -192,58 +191,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } break; - case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ - case PTRACE_CONT: { /* restart after signal. */ - ret = -EIO; - if (!valid_signal(data)) - break; - if (request == PTRACE_SYSCALL) - set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - else - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - child->exit_code = data; - wake_up_process(child); - ret = 0; - break; - } - -/* - * make the child exit. Best I can do is send it a sigkill. - * perhaps it should be put in the status that it wants to - * exit. - */ - case PTRACE_KILL: { - ret = 0; - if (child->exit_state == EXIT_ZOMBIE) /* already dead */ - break; - child->exit_code = SIGKILL; - wake_up_process(child); - break; - } - - case PTRACE_SINGLESTEP: { /* set the trap flag. */ - struct pt_regs *regs; - - ret = -EIO; - if (!valid_signal(data)) - break; - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - if ((child->ptrace & PT_DTRACE) == 0) { - /* Spurious delayed TF traps may occur */ - child->ptrace |= PT_DTRACE; - } - - regs = child->thread.uregs; - - regs->sr |= SR_SSTEP; /* auto-resetting upon exception */ - - child->exit_code = data; - /* give it a chance to run. */ - wake_up_process(child); - ret = 0; - break; - } - default: ret = ptrace_request(child, request, addr, data); break; @@ -341,5 +288,5 @@ asmlinkage void do_software_break_point(unsigned long long vec, */ void ptrace_disable(struct task_struct *child) { - /* nothing to do.. */ + user_disable_single_step(child); } -- GitLab From ab99c733ae73cce31f2a2434f7099564e5a73d95 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 19:55:30 +0900 Subject: [PATCH 0616/1024] sh: Make syscall tracer use tracehook notifiers, add TIF_NOTIFY_RESUME. This follows the changes in commits: 7d6d637dac2050f30a1b57b0a3dc5de4a10616ba 4f72c4279eab1e5f3ed1ac4e55d4527617582392 on powerpc. Adding in TIF_NOTIFY_RESUME, and cleaning up the syscall tracing to be more generic. This is an incremental step to turning on tracehook, as well as unifying more of the ptrace and signal code across the 32/64 split. Signed-off-by: Paul Mundt --- arch/sh/include/asm/thread_info.h | 11 +- arch/sh/kernel/cpu/sh5/entry.S | 17 +-- arch/sh/kernel/entry-common.S | 12 +-- arch/sh/kernel/ptrace_32.c | 54 +++++----- arch/sh/kernel/ptrace_64.c | 50 +++++---- arch/sh/kernel/signal_32.c | 22 ++-- arch/sh/kernel/signal_64.c | 166 ++++++++++++++++-------------- 7 files changed, 174 insertions(+), 158 deletions(-) diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h index 03d1e386670..0a894cafb1d 100644 --- a/arch/sh/include/asm/thread_info.h +++ b/arch/sh/include/asm/thread_info.h @@ -119,10 +119,11 @@ static inline struct thread_info *current_thread_info(void) #define TIF_SINGLESTEP 4 /* singlestepping active */ #define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */ #define TIF_SECCOMP 6 /* secure computing */ +#define TIF_NOTIFY_RESUME 7 /* callback before returning to user */ #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 -#define TIF_FREEZE 19 +#define TIF_FREEZE 19 /* Freezing for suspend */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) @@ -131,6 +132,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_USEDFPU (1 << TIF_USEDFPU) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_FREEZE (1 << TIF_FREEZE) @@ -146,9 +148,10 @@ static inline struct thread_info *current_thread_info(void) _TIF_SYSCALL_AUDIT | _TIF_SECCOMP) /* work to do on any return to u-space */ -#define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \ - _TIF_NEED_RESCHED | _TIF_SYSCALL_AUDIT | \ - _TIF_SINGLESTEP | _TIF_RESTORE_SIGMASK) +#define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \ + _TIF_NEED_RESCHED | _TIF_SYSCALL_AUDIT | \ + _TIF_SINGLESTEP | _TIF_RESTORE_SIGMASK | \ + _TIF_NOTIFY_RESUME) /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK (_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \ diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index bba331d5ef7..04c7da96814 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -987,11 +987,11 @@ work_resched: work_notifysig: gettr tr1, LINK - movi do_signal, r6 + movi do_notify_resume, r6 ptabs r6, tr0 or SP, ZERO, r2 - or ZERO, ZERO, r3 - blink tr0, LINK /* Call do_signal(regs, 0), return here */ + or r7, ZERO, r3 + blink tr0, LINK /* Call do_notify_resume(regs, current_thread_info->flags), return here */ restore_all: /* Do prefetches */ @@ -1305,13 +1305,15 @@ syscall_allowed: beq/l r6, ZERO, tr0 /* Trace it by calling syscall_trace before and after */ - movi syscall_trace, r4 + movi do_syscall_trace_enter, r4 or SP, ZERO, r2 - or ZERO, ZERO, r3 ptabs r4, tr0 blink tr0, LINK - /* Reload syscall number as r5 is trashed by syscall_trace */ + /* Save the retval */ + st.q SP, FRAME_R(2), r2 + + /* Reload syscall number as r5 is trashed by do_syscall_trace_enter */ ld.q SP, FRAME_S(FSYSCALL_ID), r5 andi r5, 0x1ff, r5 @@ -1343,9 +1345,8 @@ syscall_ret_trace: /* We get back here only if under trace */ st.q SP, FRAME_R(9), r2 /* Save return value */ - movi syscall_trace, LINK + movi do_syscall_trace_leave, LINK or SP, ZERO, r2 - movi 1, r3 ptabs LINK, tr0 blink tr0, LINK diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index a34417c8ee0..0bc17def55a 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -211,10 +211,8 @@ syscall_exit_work: nop #endif sti - ! XXX setup arguments... mov r15, r4 - mov #1, r5 - mov.l 4f, r0 ! do_syscall_trace + mov.l 8f, r0 ! do_syscall_trace_leave jsr @r0 nop bra resume_userspace @@ -223,12 +221,11 @@ syscall_exit_work: .align 2 syscall_trace_entry: ! Yes it is traced. - ! XXX setup arguments... mov r15, r4 - mov #0, r5 - mov.l 4f, r11 ! Call do_syscall_trace which notifies + mov.l 7f, r11 ! Call do_syscall_trace_enter which notifies jsr @r11 ! superior (will chomp R[0-7]) nop + mov.l r0, @(OFF_R0,r15) ! Save return value ! Reload R0-R4 from kernel stack, where the ! parent may have modified them using ! ptrace(POKEUSR). (Note that R0-R2 are @@ -389,8 +386,9 @@ syscall_exit: #endif 2: .long NR_syscalls 3: .long sys_call_table -4: .long do_syscall_trace #ifdef CONFIG_TRACE_IRQFLAGS 5: .long trace_hardirqs_on 6: .long trace_hardirqs_off #endif +7: .long do_syscall_trace_enter +8: .long do_syscall_trace_leave diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index ff66f97c564..f48769b23bd 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -216,41 +217,38 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return ret; } -asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) +asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) { - struct task_struct *tsk = current; + long ret = 0; secure_computing(regs->regs[0]); - if (unlikely(current->audit_context) && entryexit) - audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]), - regs->regs[0]); - - if (!test_thread_flag(TIF_SYSCALL_TRACE) && - !test_thread_flag(TIF_SINGLESTEP)) - goto out; - if (!(tsk->ptrace & PT_PTRACED)) - goto out; - - /* the 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) && - !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0)); - - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (tsk->exit_code) { - send_sig(tsk->exit_code, tsk, 1); - tsk->exit_code = 0; - } + if (test_thread_flag(TIF_SYSCALL_TRACE) && + tracehook_report_syscall_entry(regs)) + /* + * Tracing decided this syscall should not happen. + * We'll return a bogus call number to get an ENOSYS + * error, but leave the original number in regs->regs[0]. + */ + ret = -1L; -out: - if (unlikely(current->audit_context) && !entryexit) + if (unlikely(current->audit_context)) audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[3], regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]); + return ret ?: regs->regs[0]; +} + +asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) +{ + int step; + + if (unlikely(current->audit_context)) + audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]), + regs->regs[0]); + + step = test_thread_flag(TIF_SINGLESTEP); + if (step || test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, step); } diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index 108f3962e39..236d8bef9cc 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -221,40 +222,37 @@ asmlinkage int sh64_ptrace(long request, long pid, long addr, long data) return sys_ptrace(request, pid, addr, data); } -asmlinkage void syscall_trace(struct pt_regs *regs, int entryexit) +asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs) { - struct task_struct *tsk = current; + long long ret = 0; secure_computing(regs->regs[9]); - if (unlikely(current->audit_context) && entryexit) - audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]), - regs->regs[9]); - - if (!test_thread_flag(TIF_SYSCALL_TRACE) && - !test_thread_flag(TIF_SINGLESTEP)) - goto out; - if (!(tsk->ptrace & PT_PTRACED)) - goto out; - - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) && - !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0)); - - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (tsk->exit_code) { - send_sig(tsk->exit_code, tsk, 1); - tsk->exit_code = 0; - } + if (test_thread_flag(TIF_SYSCALL_TRACE) && + tracehook_report_syscall_entry(regs)) + /* + * Tracing decided this syscall should not happen. + * We'll return a bogus call number to get an ENOSYS + * error, but leave the original number in regs->regs[0]. + */ + ret = -1LL; -out: - if (unlikely(current->audit_context) && !entryexit) + if (unlikely(current->audit_context)) audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[1], regs->regs[2], regs->regs[3], regs->regs[4], regs->regs[5]); + + return ret ?: regs->regs[9]; +} + +asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) +{ + if (unlikely(current->audit_context)) + audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]), + regs->regs[9]); + + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, 0); } /* Called with interrupts disabled */ diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index 4bbbde895a5..51689d29ad4 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -507,14 +508,13 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, switch (regs->regs[0]) { case -ERESTART_RESTARTBLOCK: case -ERESTARTNOHAND: + no_system_call_restart: regs->regs[0] = -EINTR; break; case -ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { - regs->regs[0] = -EINTR; - break; - } + if (!(ka->sa.sa_flags & SA_RESTART)) + goto no_system_call_restart; /* fallthrough */ case -ERESTARTNOINTR: regs->regs[0] = save_r0; @@ -589,12 +589,15 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0) * clear the TIF_RESTORE_SIGMASK flag */ if (test_thread_flag(TIF_RESTORE_SIGMASK)) clear_thread_flag(TIF_RESTORE_SIGMASK); + + tracehook_signal_handler(signr, &info, &ka, regs, + test_thread_flag(TIF_SINGLESTEP)); } return; } - no_signal: +no_signal: /* Did we come from a system call? */ if (regs->tra >= 0) { /* Restart the system call - no handlers present */ @@ -618,9 +621,14 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0) } asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0, - __u32 thread_info_flags) + unsigned long thread_info_flags) { /* deal with pending signal delivery */ - if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) + if (thread_info_flags & _TIF_SIGPENDING) do_signal(regs, save_r0); + + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } } diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c index 552eb810cd8..1d62dfef77f 100644 --- a/arch/sh/kernel/signal_64.c +++ b/arch/sh/kernel/signal_64.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -42,7 +43,84 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) -asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset); +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + * + * Note that we go through the signals twice: once to check the signals that + * the kernel can handle, and then we build all the user-level signal handling + * stack-frames in one go after that. + */ +static int do_signal(struct pt_regs *regs, sigset_t *oldset) +{ + siginfo_t info; + int signr; + struct k_sigaction ka; + + /* + * We want the common case to go fast, which + * is why we may in certain cases get here from + * kernel mode. Just return without doing anything + * if so. + */ + if (!user_mode(regs)) + return 1; + + if (try_to_freeze()) + goto no_signal; + + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else if (!oldset) + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, 0); + + if (signr > 0) { + /* Whee! Actually deliver the signal. */ + handle_signal(signr, &info, &ka, oldset, regs); + + /* + * If a signal was successfully delivered, the saved sigmask + * is in its frame, and we can clear the TIF_RESTORE_SIGMASK + * flag. + */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + clear_thread_flag(TIF_RESTORE_SIGMASK); + + tracehook_signal_handler(signr, &info, &ka, regs, 0); + return 1; + } + +no_signal: + /* Did we come from a system call? */ + if (regs->syscall_nr >= 0) { + /* Restart the system call - no handlers present */ + switch (regs->regs[REG_RET]) { + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: + /* Decode Syscall # */ + regs->regs[REG_RET] = regs->syscall_nr; + regs->pc -= 4; + break; + + case -ERESTART_RESTARTBLOCK: + regs->regs[REG_RET] = __NR_restart_syscall; + regs->pc -= 4; + break; + } + } + + /* No signal to deliver -- put the saved sigmask back */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } + + return 0; +} /* * Atomically swap in the new signal mask, and wait for a signal. @@ -643,14 +721,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, switch (regs->regs[REG_RET]) { case -ERESTART_RESTARTBLOCK: case -ERESTARTNOHAND: + no_system_call_restart: regs->regs[REG_RET] = -EINTR; break; case -ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { - regs->regs[REG_RET] = -EINTR; - break; - } + if (!(ka->sa.sa_flags & SA_RESTART)) + goto no_system_call_restart; /* fallthrough */ case -ERESTARTNOINTR: /* Decode syscall # */ @@ -673,80 +750,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, spin_unlock_irq(¤t->sighand->siglock); } -/* - * Note that 'init' is a special process: it doesn't get signals it doesn't - * want to handle. Thus you cannot kill init even with a SIGKILL even by - * mistake. - * - * Note that we go through the signals twice: once to check the signals that - * the kernel can handle, and then we build all the user-level signal handling - * stack-frames in one go after that. - */ -int do_signal(struct pt_regs *regs, sigset_t *oldset) +asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) { - siginfo_t info; - int signr; - struct k_sigaction ka; - - /* - * We want the common case to go fast, which - * is why we may in certain cases get here from - * kernel mode. Just return without doing anything - * if so. - */ - if (!user_mode(regs)) - return 1; - - if (try_to_freeze()) - goto no_signal; - - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - oldset = ¤t->saved_sigmask; - else if (!oldset) - oldset = ¤t->blocked; - - signr = get_signal_to_deliver(&info, &ka, regs, 0); - - if (signr > 0) { - /* Whee! Actually deliver the signal. */ - handle_signal(signr, &info, &ka, oldset, regs); + if (thread_info_flags & _TIF_SIGPENDING) + do_signal(regs, 0); - /* - * If a signal was successfully delivered, the saved sigmask - * is in its frame, and we can clear the TIF_RESTORE_SIGMASK - * flag. - */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - clear_thread_flag(TIF_RESTORE_SIGMASK); - - return 1; + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); } - -no_signal: - /* Did we come from a system call? */ - if (regs->syscall_nr >= 0) { - /* Restart the system call - no handlers present */ - switch (regs->regs[REG_RET]) { - case -ERESTARTNOHAND: - case -ERESTARTSYS: - case -ERESTARTNOINTR: - /* Decode Syscall # */ - regs->regs[REG_RET] = regs->syscall_nr; - regs->pc -= 4; - break; - - case -ERESTART_RESTARTBLOCK: - regs->regs[REG_RET] = __NR_restart_syscall; - regs->pc -= 4; - break; - } - } - - /* No signal to deliver -- put the saved sigmask back */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) { - clear_thread_flag(TIF_RESTORE_SIGMASK); - sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); - } - - return 0; } -- GitLab From 9e5e21170e4de269cd5b9d53ac9d60d220e3be63 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 30 Jul 2008 20:05:35 +0900 Subject: [PATCH 0617/1024] sh: Fix up the audit arch endian specification. Presently this was always being set to AUDIT_ARCH_SH, which assumes big endian. Fix this up so that the architecture actually reflects what we're running on. Signed-off-by: Paul Mundt --- arch/sh/kernel/ptrace_32.c | 13 ++++++++++++- arch/sh/kernel/ptrace_64.c | 16 +++++++++++++++- 2 files changed, 27 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index f48769b23bd..035cb300d3d 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -217,6 +217,17 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return ret; } +static inline int audit_arch(void) +{ + int arch = EM_SH; + +#ifdef CONFIG_CPU_LITTLE_ENDIAN + arch |= __AUDIT_ARCH_LE; +#endif + + return arch; +} + asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) { long ret = 0; @@ -233,7 +244,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) ret = -1L; if (unlikely(current->audit_context)) - audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[3], + audit_syscall_entry(audit_arch(), regs->regs[3], regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]); diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index 236d8bef9cc..5922edd416d 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -222,6 +222,20 @@ asmlinkage int sh64_ptrace(long request, long pid, long addr, long data) return sys_ptrace(request, pid, addr, data); } +static inline int audit_arch(void) +{ + int arch = EM_SH; + +#ifdef CONFIG_64BIT + arch |= __AUDIT_ARCH_64BIT; +#endif +#ifdef CONFIG_CPU_LITTLE_ENDIAN + arch |= __AUDIT_ARCH_LE; +#endif + + return arch; +} + asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs) { long long ret = 0; @@ -238,7 +252,7 @@ asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs) ret = -1LL; if (unlikely(current->audit_context)) - audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[1], + audit_syscall_entry(audit_arch(), regs->regs[1], regs->regs[2], regs->regs[3], regs->regs[4], regs->regs[5]); -- GitLab From 26a8ef5326e390d89290822fb1f4fcf16845fd84 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 31 Jul 2008 16:24:19 +0900 Subject: [PATCH 0618/1024] net: stnic: Fix up fallout from SH header migration. asm/se.h moved to mach-se/mach/se.h, update the path. We could use mach/se.h here also, but it's preferable to be explicit when there's only a single supported mach-type. Signed-off-by: Paul Mundt --- drivers/net/stnic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/stnic.c b/drivers/net/stnic.c index b65be5d70fe..2ed0bd59681 100644 --- a/drivers/net/stnic.c +++ b/drivers/net/stnic.c @@ -19,7 +19,7 @@ #include #include -#include +#include #include #ifdef CONFIG_SH_STANDARD_BIOS #include -- GitLab From 61a2d07d3fb1ac34d142b9b62d4cd60a0f8c229e Mon Sep 17 00:00:00 2001 From: Niels de Vos Date: Thu, 31 Jul 2008 00:07:23 -0700 Subject: [PATCH 0619/1024] Remove newline from the description of module parameters Some module parameters with only one line have the '\n' at the end of the description. This is not needed nor wanted as after the description the type (i.e. int) is followed by a newline. Some modules contain a multi-line description, these are not affected by this patch. Signed-off-by: Niels de Vos Acked-by: Randy Dunlap Cc: John W. Linville Cc: Ed L. Cashin Cc: Dave Airlie Cc: Roland Dreier Acked-by: Mauro Carvalho Chehab Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/asus_acpi.c | 4 ++-- drivers/block/aoe/aoenet.c | 2 +- drivers/gpu/drm/radeon/radeon_drv.c | 2 +- drivers/infiniband/hw/ipath/ipath_iba7220.c | 2 +- drivers/media/video/cs5345.c | 2 +- drivers/media/video/cs53l32a.c | 2 +- drivers/media/video/mt9v022.c | 2 +- drivers/net/netconsole.c | 2 +- drivers/net/tokenring/3c359.c | 8 ++++---- drivers/net/wireless/ipw2200.c | 2 +- drivers/net/wireless/iwlwifi/iwl-4965.c | 2 +- drivers/video/matrox/matroxfb_base.c | 2 +- 12 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c index 44ad90c03c2..d3d0886d637 100644 --- a/drivers/acpi/asus_acpi.c +++ b/drivers/acpi/asus_acpi.c @@ -78,9 +78,9 @@ MODULE_LICENSE("GPL"); static uid_t asus_uid; static gid_t asus_gid; module_param(asus_uid, uint, 0); -MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus.\n"); +MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus"); module_param(asus_gid, uint, 0); -MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus.\n"); +MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus"); /* For each model, all features implemented, * those marked with R are relative to HOTK, A for absolute */ diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c index d625169c8e4..0c81ca73128 100644 --- a/drivers/block/aoe/aoenet.c +++ b/drivers/block/aoe/aoenet.c @@ -30,7 +30,7 @@ enum { static char aoe_iflist[IFLISTSZ]; module_param_string(aoe_iflist, aoe_iflist, IFLISTSZ, 0600); -MODULE_PARM_DESC(aoe_iflist, "aoe_iflist=\"dev1 [dev2 ...]\"\n"); +MODULE_PARM_DESC(aoe_iflist, "aoe_iflist=\"dev1 [dev2 ...]\""); #ifndef MODULE static int __init aoe_iflist_setup(char *str) diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c index 349ac3d3b84..637bd7faf13 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.c +++ b/drivers/gpu/drm/radeon/radeon_drv.c @@ -38,7 +38,7 @@ int radeon_no_wb; -MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers\n"); +MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers"); module_param_named(no_wb, radeon_no_wb, int, 0444); static int dri_library_name(struct drm_device *dev, char *buf) diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c index fb70712ac85..fadbfbf55a6 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba7220.c +++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c @@ -528,7 +528,7 @@ static const struct ipath_cregs ipath_7220_cregs = { static char int_type[16] = "auto"; module_param_string(interrupt_type, int_type, sizeof(int_type), 0444); -MODULE_PARM_DESC(int_type, " interrupt_type=auto|force_msi|force_intx\n"); +MODULE_PARM_DESC(int_type, " interrupt_type=auto|force_msi|force_intx"); /* packet rate matching delay; chip has support */ static u8 rate_to_delay[2][2] = { diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c index 61d14d26686..a662b15d5b9 100644 --- a/drivers/media/video/cs5345.c +++ b/drivers/media/video/cs5345.c @@ -35,7 +35,7 @@ static int debug; module_param(debug, bool, 0644); -MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On"); +MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On"); /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c index e30a589c0e1..c4444500b33 100644 --- a/drivers/media/video/cs53l32a.c +++ b/drivers/media/video/cs53l32a.c @@ -39,7 +39,7 @@ static int debug; module_param(debug, bool, 0644); -MODULE_PARM_DESC(debug, "Debugging messages\n\t\t\t0=Off (default), 1=On"); +MODULE_PARM_DESC(debug, "Debugging messages, 0=Off (default), 1=On"); static unsigned short normal_i2c[] = { 0x22 >> 1, I2C_CLIENT_END }; diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index b31ba4e0932..56808cd2f8a 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -25,7 +25,7 @@ static char *sensor_type; module_param(sensor_type, charp, S_IRUGO); -MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"\n"); +MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\""); /* mt9v022 selected register addresses */ #define MT9V022_CHIP_VERSION 0x00 diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index e13966bb5f7..9681618c323 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -53,7 +53,7 @@ MODULE_LICENSE("GPL"); static char config[MAX_PARAM_LENGTH]; module_param_string(netconsole, config, MAX_PARAM_LENGTH, 0); -MODULE_PARM_DESC(netconsole, " netconsole=[src-port]@[src-ip]/[dev],[tgt-port]@/[tgt-macaddr]\n"); +MODULE_PARM_DESC(netconsole, " netconsole=[src-port]@[src-ip]/[dev],[tgt-port]@/[tgt-macaddr]"); #ifndef MODULE static int __init option_setup(char *opt) diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c index 7766cde0d63..bf621328b60 100644 --- a/drivers/net/tokenring/3c359.c +++ b/drivers/net/tokenring/3c359.c @@ -95,20 +95,20 @@ MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver \n") ; static int ringspeed[XL_MAX_ADAPTERS] = {0,} ; module_param_array(ringspeed, int, NULL, 0); -MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ; +MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ; /* Packet buffer size */ static int pkt_buf_sz[XL_MAX_ADAPTERS] = {0,} ; module_param_array(pkt_buf_sz, int, NULL, 0) ; -MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ; +MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ; /* Message Level */ -static int message_level[XL_MAX_ADAPTERS] = {0,} ; +static int message_level[XL_MAX_ADAPTERS] = {0,} ; module_param_array(message_level, int, NULL, 0) ; -MODULE_PARM_DESC(message_level, "3c359: Level of reported messages \n") ; +MODULE_PARM_DESC(message_level, "3c359: Level of reported messages") ; /* * This is a real nasty way of doing this, but otherwise you * will be stuck with 1555 lines of hex #'s in the code. diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 1acfbcd3703..846a7d05185 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -11946,7 +11946,7 @@ module_param(auto_create, int, 0444); MODULE_PARM_DESC(auto_create, "auto create adhoc network (default on)"); module_param(led, int, 0444); -MODULE_PARM_DESC(led, "enable led control on some systems (default 0 off)\n"); +MODULE_PARM_DESC(led, "enable led control on some systems (default 0 off)"); module_param(debug, int, 0444); MODULE_PARM_DESC(debug, "debug output mask"); diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 9afecb81371..ba2df1ba32d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2469,7 +2469,7 @@ MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])"); module_param_named(disable, iwl4965_mod_params.disable, int, 0444); MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])"); module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444); -MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])\n"); +MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])"); module_param_named(debug, iwl4965_mod_params.debug, int, 0444); MODULE_PARM_DESC(debug, "debug output mask"); module_param_named( diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c index 54e82f35353..c0213620279 100644 --- a/drivers/video/matrox/matroxfb_base.c +++ b/drivers/video/matrox/matroxfb_base.c @@ -2536,7 +2536,7 @@ module_param(fh, int, 0); MODULE_PARM_DESC(fh, "Startup horizontal frequency, 0-999kHz, 1000-INF Hz"); module_param(fv, int, 0); MODULE_PARM_DESC(fv, "Startup vertical frequency, 0-INF Hz\n" -"You should specify \"fv:max_monitor_vsync,fh:max_monitor_hsync,maxclk:max_monitor_dotclock\"\n"); +"You should specify \"fv:max_monitor_vsync,fh:max_monitor_hsync,maxclk:max_monitor_dotclock\""); module_param(grayscale, int, 0); MODULE_PARM_DESC(grayscale, "Sets display into grayscale. Works perfectly with paletized videomode (4, 8bpp), some limitations apply to 16, 24 and 32bpp videomodes (default=nograyscale)"); module_param(cross4MB, int, 0); -- GitLab From ea44c1d60df3640bd956a67c392865c44fe9bc45 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 31 Jul 2008 00:07:27 -0700 Subject: [PATCH 0620/1024] PNP: fix formatting of dbg_pnp_show_resources() output Each resource should be printed on its own line, so start snprintf'ing at the beginning of the buffer every time through the loop. Also, use scnprintf() rather than snprintf() when building up the buffer to print. scnprintf() returns the number of characters actually written into the buffer (not including the trailing NULL). snprintf() returns the number of characters that *would be* written, assuming everything would fit in the buffer. That's nice if we want to resize the buffer to make sure everything fits, but in this case, I just want to keep from overflowing the buffer, and it's OK if the output is truncated. Using snprintf() meant that my "len" could grow to be more than the the buffer size, which makes "sizeof(buf) - len" negative, which causes this alarming WARN_ON: http://marc.info/?l=linux-kernel&m=121736480005656&w=2 More useful snprintf/scnprintf discussion: http://lwn.net/Articles/69419/ Signed-off-by: Bjorn Helgaas Reported-by: Pete Clements Cc: Rene Herman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pnp/support.c | 96 ++++++++++++++++++++++--------------------- 1 file changed, 49 insertions(+), 47 deletions(-) diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c index bbf78ef4ba0..b42df162071 100644 --- a/drivers/pnp/support.c +++ b/drivers/pnp/support.c @@ -77,7 +77,7 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc) { #ifdef DEBUG char buf[128]; - int len = 0; + int len; struct pnp_resource *pnp_res; struct resource *res; @@ -89,9 +89,10 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc) dev_dbg(&dev->dev, "%s: current resources:\n", desc); list_for_each_entry(pnp_res, &dev->resources, list) { res = &pnp_res->res; + len = 0; - len += snprintf(buf + len, sizeof(buf) - len, " %-3s ", - pnp_resource_type_name(res)); + len += scnprintf(buf + len, sizeof(buf) - len, " %-3s ", + pnp_resource_type_name(res)); if (res->flags & IORESOURCE_DISABLED) { dev_dbg(&dev->dev, "%sdisabled\n", buf); @@ -101,18 +102,18 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc) switch (pnp_resource_type(res)) { case IORESOURCE_IO: case IORESOURCE_MEM: - len += snprintf(buf + len, sizeof(buf) - len, - "%#llx-%#llx flags %#lx", - (unsigned long long) res->start, - (unsigned long long) res->end, - res->flags); + len += scnprintf(buf + len, sizeof(buf) - len, + "%#llx-%#llx flags %#lx", + (unsigned long long) res->start, + (unsigned long long) res->end, + res->flags); break; case IORESOURCE_IRQ: case IORESOURCE_DMA: - len += snprintf(buf + len, sizeof(buf) - len, - "%lld flags %#lx", - (unsigned long long) res->start, - res->flags); + len += scnprintf(buf + len, sizeof(buf) - len, + "%lld flags %#lx", + (unsigned long long) res->start, + res->flags); break; } dev_dbg(&dev->dev, "%s\n", buf); @@ -144,66 +145,67 @@ void dbg_pnp_show_option(struct pnp_dev *dev, struct pnp_option *option) struct pnp_dma *dma; if (pnp_option_is_dependent(option)) - len += snprintf(buf + len, sizeof(buf) - len, - " dependent set %d (%s) ", - pnp_option_set(option), - pnp_option_priority_name(option)); + len += scnprintf(buf + len, sizeof(buf) - len, + " dependent set %d (%s) ", + pnp_option_set(option), + pnp_option_priority_name(option)); else - len += snprintf(buf + len, sizeof(buf) - len, " independent "); + len += scnprintf(buf + len, sizeof(buf) - len, + " independent "); switch (option->type) { case IORESOURCE_IO: port = &option->u.port; - len += snprintf(buf + len, sizeof(buf) - len, "io min %#llx " - "max %#llx align %lld size %lld flags %#x", - (unsigned long long) port->min, - (unsigned long long) port->max, - (unsigned long long) port->align, - (unsigned long long) port->size, port->flags); + len += scnprintf(buf + len, sizeof(buf) - len, "io min %#llx " + "max %#llx align %lld size %lld flags %#x", + (unsigned long long) port->min, + (unsigned long long) port->max, + (unsigned long long) port->align, + (unsigned long long) port->size, port->flags); break; case IORESOURCE_MEM: mem = &option->u.mem; - len += snprintf(buf + len, sizeof(buf) - len, "mem min %#llx " - "max %#llx align %lld size %lld flags %#x", - (unsigned long long) mem->min, - (unsigned long long) mem->max, - (unsigned long long) mem->align, - (unsigned long long) mem->size, mem->flags); + len += scnprintf(buf + len, sizeof(buf) - len, "mem min %#llx " + "max %#llx align %lld size %lld flags %#x", + (unsigned long long) mem->min, + (unsigned long long) mem->max, + (unsigned long long) mem->align, + (unsigned long long) mem->size, mem->flags); break; case IORESOURCE_IRQ: irq = &option->u.irq; - len += snprintf(buf + len, sizeof(buf) - len, "irq"); + len += scnprintf(buf + len, sizeof(buf) - len, "irq"); if (bitmap_empty(irq->map.bits, PNP_IRQ_NR)) - len += snprintf(buf + len, sizeof(buf) - len, - " "); + len += scnprintf(buf + len, sizeof(buf) - len, + " "); else { for (i = 0; i < PNP_IRQ_NR; i++) if (test_bit(i, irq->map.bits)) - len += snprintf(buf + len, - sizeof(buf) - len, - " %d", i); + len += scnprintf(buf + len, + sizeof(buf) - len, + " %d", i); } - len += snprintf(buf + len, sizeof(buf) - len, " flags %#x", - irq->flags); + len += scnprintf(buf + len, sizeof(buf) - len, " flags %#x", + irq->flags); if (irq->flags & IORESOURCE_IRQ_OPTIONAL) - len += snprintf(buf + len, sizeof(buf) - len, - " (optional)"); + len += scnprintf(buf + len, sizeof(buf) - len, + " (optional)"); break; case IORESOURCE_DMA: dma = &option->u.dma; - len += snprintf(buf + len, sizeof(buf) - len, "dma"); + len += scnprintf(buf + len, sizeof(buf) - len, "dma"); if (!dma->map) - len += snprintf(buf + len, sizeof(buf) - len, - " "); + len += scnprintf(buf + len, sizeof(buf) - len, + " "); else { for (i = 0; i < 8; i++) if (dma->map & (1 << i)) - len += snprintf(buf + len, - sizeof(buf) - len, - " %d", i); + len += scnprintf(buf + len, + sizeof(buf) - len, + " %d", i); } - len += snprintf(buf + len, sizeof(buf) - len, " (bitmask %#x) " - "flags %#x", dma->map, dma->flags); + len += scnprintf(buf + len, sizeof(buf) - len, " (bitmask %#x) " + "flags %#x", dma->map, dma->flags); break; } dev_dbg(&dev->dev, "%s\n", buf); -- GitLab From c6de002617c199f80f9a2a713dffc263bdc69b81 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Thu, 31 Jul 2008 00:07:29 -0700 Subject: [PATCH 0621/1024] Missing symbol prefix on vmlinux.lds.h ARCH=h8300: init/main.c:781: undefined reference to `___early_initcall_end' Same problem have __start___bug_table __stop___bug_table __tracedata_start __tracedata_end __per_cpu_start __per_cpu_end When defining a symbol in vmlinux.lds, use the VMLINUX_SYMBOL macro. VMLINUX_SYMBOL adds a prefix charactor. You can't just use straight symbol names in common header files as they dont take into consideration weird arch-specific ABI conventions. in the case of Blackfin/h8300, the ABI dictates that any C-visible symbols have an underscore prefixed to them. Thus all symbols in vmlinux.lds.h need to be wrapped in VMLINUX_SYMBOL() so that each arch can put hide this magic in their own files. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Yoshinori Sato Cc: Jeremy Fitzhardinge Cc: "Mike Frysinger" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/vmlinux.lds.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 6d88a923c94..cb752ba7246 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -333,9 +333,9 @@ #define BUG_TABLE \ . = ALIGN(8); \ __bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \ - __start___bug_table = .; \ + VMLINUX_SYMBOL(__start___bug_table) = .; \ *(__bug_table) \ - __stop___bug_table = .; \ + VMLINUX_SYMBOL(__stop___bug_table) = .; \ } #else #define BUG_TABLE @@ -345,9 +345,9 @@ #define TRACEDATA \ . = ALIGN(4); \ .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \ - __tracedata_start = .; \ + VMLINUX_SYMBOL(__tracedata_start) = .; \ *(.tracedata) \ - __tracedata_end = .; \ + VMLINUX_SYMBOL(__tracedata_end) = .; \ } #else #define TRACEDATA @@ -362,7 +362,7 @@ #define INITCALLS \ *(.initcallearly.init) \ - __early_initcall_end = .; \ + VMLINUX_SYMBOL(__early_initcall_end) = .; \ *(.initcall0.init) \ *(.initcall0s.init) \ *(.initcall1.init) \ @@ -383,9 +383,9 @@ #define PERCPU(align) \ . = ALIGN(align); \ - __per_cpu_start = .; \ + VMLINUX_SYMBOL(__per_cpu_start) = .; \ .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { \ *(.data.percpu) \ *(.data.percpu.shared_aligned) \ } \ - __per_cpu_end = .; + VMLINUX_SYMBOL(__per_cpu_end) = .; -- GitLab From 0ef89d25d3e390dfa7c46772907951744a4067dc Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 31 Jul 2008 00:07:30 -0700 Subject: [PATCH 0622/1024] mm/hugetlb: don't crash when HPAGE_SHIFT is 0 Some platform decide whether they support huge pages at boot time. On these, such as powerpc, HPAGE_SHIFT is a variable, not a constant, and is set to 0 when there is no such support. The patches to introduce multiple huge pages support broke that causing the kernel to crash at boot time on machines such as POWER3 which lack support for multiple page sizes. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index d237a02eb22..28a2980ee43 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1283,7 +1283,12 @@ module_exit(hugetlb_exit); static int __init hugetlb_init(void) { - BUILD_BUG_ON(HPAGE_SHIFT == 0); + /* Some platform decide whether they support huge pages at boot + * time. On these, such as powerpc, HPAGE_SHIFT is set to 0 when + * there is no such support + */ + if (HPAGE_SHIFT == 0) + return 0; if (!size_to_hstate(default_hstate_size)) { default_hstate_size = HPAGE_SIZE; -- GitLab From 3ab36ab68531ad90648fdeedcaf437f121572ede Mon Sep 17 00:00:00 2001 From: Eugeniy Meshcheryakov Date: Thu, 31 Jul 2008 10:03:19 +0100 Subject: [PATCH 0623/1024] try harder to load tty ldisc driver Currently function tty_ldisc_get() tries to load an ldisc driver module only when tty_ldisc_try_get() returns -EAGAIN. This happens only if module is being unloaded. If ldisc module is not loaded tty_ldisc_try_get() returns -EINVAL and this case is not handled in tty_ldisc_get(), so request_module() is not called. Attached patch fixes this by calling request_module() if tty_ldisc_try_get() returned any error code. I discovered this when my UMTS modem stopped working with 2.6.27-rc1 because module ppp_async was not loaded. Signed-off-by: Eugeniy Meshcheryakov Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/tty_ldisc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index 241cbdea65a..f307f135cbf 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -169,7 +169,7 @@ static int tty_ldisc_get(int disc, struct tty_ldisc *ld) if (disc < N_TTY || disc >= NR_LDISCS) return -EINVAL; err = tty_ldisc_try_get(disc, ld); - if (err == -EAGAIN) { + if (err < 0) { request_module("tty-ldisc-%d", disc); err = tty_ldisc_try_get(disc, ld); } -- GitLab From 02c363808981b67e631fe71cc7e952497f761bef Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 31 Jul 2008 13:01:30 +0100 Subject: [PATCH 0624/1024] MN10300: Wire up new system calls Wire up system calls added in the last merge window for the MN10300 arch. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/entry.S | 6 ++++++ include/asm-mn10300/unistd.h | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 11de3606eee..b7cbb1487af 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -716,6 +716,12 @@ ENTRY(sys_call_table) .long sys_fallocate /* 325 */ .long sys_timerfd_settime .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 /* 330 */ + .long sys_dup3 + .long sys_pipe2 + .long sys_inotify_init1 nr_syscalls=(.-sys_call_table)/4 diff --git a/include/asm-mn10300/unistd.h b/include/asm-mn10300/unistd.h index 3721aa9e195..543a4f98695 100644 --- a/include/asm-mn10300/unistd.h +++ b/include/asm-mn10300/unistd.h @@ -338,6 +338,12 @@ #define __NR_fallocate 325 #define __NR_timerfd_settime 326 #define __NR_timerfd_gettime 327 +#define __NR_signalfd4 328 +#define __NR_eventfd2 329 +#define __NR_epoll_create1 330 +#define __NR_dup3 331 +#define __NR_pipe2 332 +#define __NR_inotify_init1 333 #ifdef __KERNEL__ -- GitLab From 784dd7b64ca661722f539db906d56ce54906f2fb Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 31 Jul 2008 13:46:33 +0100 Subject: [PATCH 0625/1024] FRV: Wire up new system calls Wire up for FRV the system calls that were added in the last merge window. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/frv/kernel/entry.S | 7 ++++++- include/asm-frv/unistd.h | 8 +++++++- 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index b8a4b94779b..99060ab507e 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1519,6 +1519,11 @@ sys_call_table: .long sys_fallocate .long sys_timerfd_settime /* 325 */ .long sys_timerfd_gettime - + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 syscall_table_size = (. - sys_call_table) diff --git a/include/asm-frv/unistd.h b/include/asm-frv/unistd.h index f184eb8c047..edcfaf5f041 100644 --- a/include/asm-frv/unistd.h +++ b/include/asm-frv/unistd.h @@ -333,10 +333,16 @@ #define __NR_fallocate 324 #define __NR_timerfd_settime 325 #define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 #ifdef __KERNEL__ -#define NR_syscalls 325 +#define NR_syscalls 333 #define __ARCH_WANT_IPC_PARSE_VERSION /* #define __ARCH_WANT_OLD_READDIR */ -- GitLab From a97762a77f927577525868e39661084170ce3605 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 31 Jul 2008 12:40:52 -0400 Subject: [PATCH 0626/1024] dual license ftrace.txt I asked legal about the licensing of ftrace.txt, and they told me that, unless the Documentation directory is specifically set up to handle non GPL licenses (which it does not appear to be), then it would be best to put ftrace.txt under the GPL. This patch adds a dual license to ftrace.txt such that it is under both the FDL and the GPL. Signed-off-by: Steven Rostedt Signed-off-by: Linus Torvalds --- Documentation/ftrace.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index f218f616ff6..d330fe3103d 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -4,6 +4,7 @@ Copyright 2008 Red Hat Inc. Author: Steven Rostedt License: The GNU Free Documentation License, Version 1.2 + (dual licensed under the GPL v2) Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton, John Kacur, and David Teigland. -- GitLab From 3669bc143fb3d389918379547f4a6b28a757b7fe Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Fri, 1 Aug 2008 15:08:15 -0500 Subject: [PATCH 0627/1024] Remove EXPORTS of follow_page & zap_page_range Delete 2 EXPORTs that were accidentally sent upstream. Signed-off-by: Jack Steiner Signed-off-by: Linus Torvalds --- mm/memory.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/mm/memory.c b/mm/memory.c index 0e4eea10c7b..6793b9c6810 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -993,7 +993,6 @@ unsigned long zap_page_range(struct vm_area_struct *vma, unsigned long address, tlb_finish_mmu(tlb, address, end); return end; } -EXPORT_SYMBOL_GPL(zap_page_range); /** * zap_vma_ptes - remove ptes mapping the vma @@ -1111,7 +1110,6 @@ no_page_table: } return page; } -EXPORT_SYMBOL_GPL(follow_page); /* Can we do the FOLL_ANON optimization? */ static inline int use_zero_page(struct vm_area_struct *vma) -- GitLab From 4744b43431e8613f920c5cba88346756f53c5165 Mon Sep 17 00:00:00 2001 From: Tim Bird Date: Fri, 1 Aug 2008 14:05:50 -0700 Subject: [PATCH 0628/1024] embedded: fix vc_translate operator precedence This fixes a bug in operator precedence in the newly introduced vc_translate macro. Without this fix, the translation of some characters on the kernel console is garbled. This patch was copied to the e-mail list previously for testing. Now, all reports confirm that it works, so this is an official post for application. Signed-off-by: Tim Bird Signed-off-by: David Woodhouse --- include/linux/vt_kern.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index 14c0e91be9b..8c8119ffee1 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -74,7 +74,7 @@ void con_protect_unimap(struct vc_data *vc, int rdonly); int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc); #define vc_translate(vc, c) ((vc)->vc_translate[(c) | \ - (vc)->vc_toggle_meta ? 0x80 : 0]) + ((vc)->vc_toggle_meta ? 0x80 : 0)]) #else #define con_set_trans_old(arg) (0) #define con_get_trans_old(arg) (-EINVAL) -- GitLab From 4385e12b291a6816987cb88a74fc116f520180f8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Sat, 2 Aug 2008 07:14:09 +0900 Subject: [PATCH 0629/1024] sh: Revert the location change of auto-generated asm/machtypes.h This ended up causing build breakage on O= builds, as reported by Adrian: <-- snip --> ... CC init/main.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/irq.h:4, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/irq.h:23, from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/hardirq.h:5, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/hardirq.h:7, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/asm-generic/local.h:5, from /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/local.h:4, from /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/module.h:19, from /home/bunk/linux/kernel-2.6/git/linux-2.6/init/main.c:13: /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/include/asm/machvec.h:15:27: error: asm/machtypes.h: No such file or directory make[2]: *** [init/main.o] Error 1 <-- snip --> So we simply move machtypes.h back to its original place. asm-offsets.h is still generated there regardless, until such a time that we find a better place to stash auto-generated files. Reported-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/Makefile | 4 ++-- arch/sh/tools/Makefile | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 25659ce74ba..7b70cfd2516 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -164,7 +164,7 @@ KBUILD_AFLAGS += $(cflags-y) PHONY += maketools FORCE maketools: include/linux/version.h FORCE - $(Q)$(MAKE) $(build)=arch/sh/tools arch/sh/include/asm/machtypes.h + $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h all: $(KBUILD_IMAGE) @@ -215,4 +215,4 @@ arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S $(call filechk,gen-syscalltab) CLEAN_FILES += arch/sh/lib64/syscalltab.h \ - arch/sh/include/asm/machtypes.h + include/asm-sh/machtypes.h diff --git a/arch/sh/tools/Makefile b/arch/sh/tools/Makefile index b5d202be820..567516b58ac 100644 --- a/arch/sh/tools/Makefile +++ b/arch/sh/tools/Makefile @@ -10,7 +10,7 @@ # Shamelessly cloned from ARM. # -arch/sh/include/asm/machtypes.h: $(src)/gen-mach-types $(src)/mach-types +include/asm-sh/machtypes.h: $(src)/gen-mach-types $(src)/mach-types @echo ' Generating $@' - $(Q)if [ ! -d arch/sh/include/asm ]; then mkdir -p arch/sh/include/asm; fi + $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } -- GitLab From 49de935c107a53b0eba336efceb1dc3a8be64f87 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 2 Aug 2008 01:13:44 +0300 Subject: [PATCH 0630/1024] sh: fix LIBGCC Commit f15cbe6f1a4b4d9df59142fc8e4abb973302cf44 (sh: migrate to arch/sh/include/) moved KBUILD_CFLAGS (which is used by LIBGCC) below LIBGCC, causing build errors like the following: <-- snip --> ... LD .tmp_vmlinux1 arch/sh/kernel/built-in.o: In function `module_clk_recalc': clock-sh4.c:(.text+0x80f0): undefined reference to `__udivsi3_i4i' ... make[1]: *** [.tmp_vmlinux1] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/Makefile | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 7b70cfd2516..01d85c74481 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -95,8 +95,6 @@ head-y := arch/sh/kernel/init_task.o head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o -LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) - core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ @@ -145,10 +143,6 @@ cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4 cpuincdir-$(CONFIG_CPU_SH5) += cpu-sh5 cpuincdir-y += cpu-common # Must be last -libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) -libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) -libs-y += $(LIBGCC) - drivers-y += arch/sh/drivers/ drivers-$(CONFIG_OPROFILE) += arch/sh/oprofile/ @@ -161,6 +155,12 @@ KBUILD_CFLAGS += -pipe $(cflags-y) KBUILD_CPPFLAGS += $(cflags-y) KBUILD_AFLAGS += $(cflags-y) +LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) + +libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) +libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) +libs-y += $(LIBGCC) + PHONY += maketools FORCE maketools: include/linux/version.h FORCE -- GitLab From 759da9267177e5005c8f21e11d29d26f4f459744 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 1 Aug 2008 23:58:36 +0100 Subject: [PATCH 0631/1024] firmware: silence __fw_modbuild and __fw_modinst 'Nothing to be done' messages People don't like them and think they're errors. Leave the __fw_install one though; when 'make firmware_install' does nothing, it's best to have a 'Nothing to be done for...' message rather than just doing nothing. Signed-off-by: David Woodhouse --- scripts/Makefile.fwinst | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst index f63a663de15..6bf8e87f1dc 100644 --- a/scripts/Makefile.fwinst +++ b/scripts/Makefile.fwinst @@ -50,8 +50,12 @@ PHONY += __fw_install __fw_modinst FORCE .PHONY: $(PHONY) __fw_install: $(installed-fw) + __fw_modinst: $(installed-mod-fw) + @: + __fw_modbuild: $(addprefix $(obj)/,$(mod-fw)) + @: FORCE: -- GitLab From f1136d022af8f07a97f59c6d07483bdb82ffbd8e Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sat, 2 Aug 2008 00:01:21 +0100 Subject: [PATCH 0632/1024] [MTD] Fix !CONFIG_BLOCK compile for mtdsuper.c As reported by Adrian Bunk, commit d5686b444ff3f72808d2b3fbd58672a86cdf38e7 (switch mtd and dm-table to lookup_bdev()) causes the following compile error with CONFIG_BLOCK=n: CC drivers/mtd/mtdsuper.o drivers/mtd/mtdsuper.c: In function `get_sb_mtd': drivers/mtd/mtdsuper.c:184: error: implicit declaration of function 'lookup_bdev' drivers/mtd/mtdsuper.c:184: warning: assignment makes pointer from integer without a cast drivers/mtd/mtdsuper.c:197: error: implicit declaration of function 'bdput' make[3]: *** [drivers/mtd/mtdsuper.o] Error 1 Fix it by putting the block device lookup inside #ifdef CONFIG_BLOCK Signed-off-by: David Woodhouse --- drivers/mtd/mtdsuper.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c index 9b6af7e74a6..00d46e137b2 100644 --- a/drivers/mtd/mtdsuper.c +++ b/drivers/mtd/mtdsuper.c @@ -125,8 +125,11 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags, int (*fill_super)(struct super_block *, void *, int), struct vfsmount *mnt) { +#ifdef CONFIG_BLOCK struct block_device *bdev; - int mtdnr, ret; + int ret, major; +#endif + int mtdnr; if (!dev_name) return -EINVAL; @@ -178,6 +181,7 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags, } } +#ifdef CONFIG_BLOCK /* try the old way - the hack where we allowed users to mount * /dev/mtdblock$(n) but didn't actually _use_ the blockdev */ @@ -190,22 +194,25 @@ int get_sb_mtd(struct file_system_type *fs_type, int flags, DEBUG(1, "MTDSB: lookup_bdev() returned 0\n"); ret = -EINVAL; - if (MAJOR(bdev->bd_dev) != MTD_BLOCK_MAJOR) - goto not_an_MTD_device; + major = MAJOR(bdev->bd_dev); mtdnr = MINOR(bdev->bd_dev); bdput(bdev); + if (major != MTD_BLOCK_MAJOR) + goto not_an_MTD_device; + return get_sb_mtd_nr(fs_type, flags, dev_name, data, mtdnr, fill_super, mnt); not_an_MTD_device: +#endif /* CONFIG_BLOCK */ + if (!(flags & MS_SILENT)) printk(KERN_NOTICE "MTD: Attempt to mount non-MTD device \"%s\"\n", dev_name); - bdput(bdev); - return ret; + return -EINVAL; } EXPORT_SYMBOL_GPL(get_sb_mtd); -- GitLab From 82f97b8d3cb3982ec97e081598c671fab2c321b0 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 2 Aug 2008 01:31:09 -0700 Subject: [PATCH 0633/1024] rt2x00: Fix compile warning rt2x00usb_vendor_request_large_buff is write-only, so it is safe to make the argument a const. Fixes compile warning: drivers/net/wireless/rt2x00/rt73usb.c: In function 'rt73usb_load_firmware': drivers/net/wireless/rt2x00/rt73usb.c:916: warning: passing argument 5 of 'rt2x00usb_vendor_request_large_buff' discards qualifiers from pointer target typ Signed-off-by: Ivo van Doorn Signed-off-by: David S. Miller --- drivers/net/wireless/rt2x00/rt2x00usb.c | 4 ++-- drivers/net/wireless/rt2x00/rt2x00usb.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 933e6cc9359..8d76bb2e031 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -124,7 +124,7 @@ EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, const u8 request, const u8 requesttype, - const u16 offset, void *buffer, + const u16 offset, const void *buffer, const u16 buffer_length, const int timeout) { @@ -134,7 +134,7 @@ int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, mutex_lock(&rt2x00dev->usb_cache_mutex); - tb = buffer; + tb = (char *)buffer; off = offset; len = buffer_length; while (len && !status) { diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index ee3875f894a..3b4a67417f9 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -185,7 +185,7 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, */ int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, const u8 request, const u8 requesttype, - const u16 offset, void *buffer, + const u16 offset, const void *buffer, const u16 buffer_length, const int timeout); -- GitLab From ff4db0a043a5dee7180bdffd178e61cd02812c68 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 2 Aug 2008 15:21:31 +0100 Subject: [PATCH 0634/1024] [ARM] Remove explicit dependency for misc.o from compressed/Makefile Signed-off-by: Russell King --- arch/arm/boot/compressed/Makefile | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 95baac4939e..94462a097f8 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -112,6 +112,3 @@ $(obj)/font.c: $(FONTC) $(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config @sed "$(SEDFLAGS)" < $< > $@ - -$(obj)/misc.o: $(obj)/misc.c include/asm/arch/uncompress.h lib/inflate.c - -- GitLab From 780aefed1e179b23dcfbd6cfcb627ec3bd0a164c Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Tue, 29 Jul 2008 18:47:22 +0200 Subject: [PATCH 0635/1024] mISDN fix main ISDN Makefile Compile hardware directory independent from selecting CAPI support. Signed-off-by: Karsten Keil --- drivers/isdn/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/Makefile b/drivers/isdn/Makefile index 8380a4568d1..f1f777570e8 100644 --- a/drivers/isdn/Makefile +++ b/drivers/isdn/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_ISDN_I4L) += i4l/ obj-$(CONFIG_ISDN_CAPI) += capi/ obj-$(CONFIG_MISDN) += mISDN/ -obj-$(CONFIG_ISDN_CAPI) += hardware/ +obj-$(CONFIG_ISDN) += hardware/ obj-$(CONFIG_ISDN_DIVERSION) += divert/ obj-$(CONFIG_ISDN_DRV_HISAX) += hisax/ obj-$(CONFIG_ISDN_DRV_ICN) += icn/ -- GitLab From ff4cc1de2401ad44ae084c3f5a9e898af0879520 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Wed, 30 Jul 2008 18:26:58 +0200 Subject: [PATCH 0636/1024] mISDN cleanup user interface The channelmap should have the same size on 32 and 64 bit systems and should not depend on endianess. Thanks to David Woodhouse for spotting this. Signed-off-by: Karsten Keil --- drivers/isdn/hardware/mISDN/hfcmulti.c | 6 ++--- drivers/isdn/hardware/mISDN/hfcpci.c | 2 +- drivers/isdn/mISDN/l1oip_core.c | 6 ++--- drivers/isdn/mISDN/socket.c | 4 ++-- include/linux/mISDNif.h | 32 ++++++++++++++++++++++---- 5 files changed, 35 insertions(+), 15 deletions(-) diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index 2649ea55a9e..10144e871c0 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -3971,7 +3971,7 @@ open_bchannel(struct hfc_multi *hc, struct dchannel *dch, struct bchannel *bch; int ch; - if (!test_bit(rq->adr.channel, &dch->dev.channelmap[0])) + if (!test_channelmap(rq->adr.channel, dch->dev.channelmap)) return -EINVAL; if (rq->protocol == ISDN_P_NONE) return -EINVAL; @@ -4587,7 +4587,7 @@ init_e1_port(struct hfc_multi *hc, struct hm_map *m) list_add(&bch->ch.list, &dch->dev.bchannels); hc->chan[ch].bch = bch; hc->chan[ch].port = 0; - test_and_set_bit(bch->nr, &dch->dev.channelmap[0]); + set_channelmap(bch->nr, dch->dev.channelmap); } /* set optical line type */ if (port[Port_cnt] & 0x001) { @@ -4755,7 +4755,7 @@ init_multi_port(struct hfc_multi *hc, int pt) list_add(&bch->ch.list, &dch->dev.bchannels); hc->chan[i + ch].bch = bch; hc->chan[i + ch].port = pt; - test_and_set_bit(bch->nr, &dch->dev.channelmap[0]); + set_channelmap(bch->nr, dch->dev.channelmap); } /* set master clock */ if (port[Port_cnt] & 0x001) { diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c index 3231814e7ef..9cf5edbb1a9 100644 --- a/drivers/isdn/hardware/mISDN/hfcpci.c +++ b/drivers/isdn/hardware/mISDN/hfcpci.c @@ -2056,7 +2056,7 @@ setup_card(struct hfc_pci *card) card->dch.dev.nrbchan = 2; for (i = 0; i < 2; i++) { card->bch[i].nr = i + 1; - test_and_set_bit(i + 1, &card->dch.dev.channelmap[0]); + set_channelmap(i + 1, card->dch.dev.channelmap); card->bch[i].debug = debug; mISDN_initbchannel(&card->bch[i], MAX_DATA_MEM); card->bch[i].hw = card; diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c index 155b99780c4..e42150a5778 100644 --- a/drivers/isdn/mISDN/l1oip_core.c +++ b/drivers/isdn/mISDN/l1oip_core.c @@ -1006,8 +1006,7 @@ open_bchannel(struct l1oip *hc, struct dchannel *dch, struct channel_req *rq) struct bchannel *bch; int ch; - if (!test_bit(rq->adr.channel & 0x1f, - &dch->dev.channelmap[rq->adr.channel >> 5])) + if (!test_channelmap(rq->adr.channel, dch->dev.channelmap)) return -EINVAL; if (rq->protocol == ISDN_P_NONE) return -EINVAL; @@ -1412,8 +1411,7 @@ init_card(struct l1oip *hc, int pri, int bundle) bch->ch.nr = i + ch; list_add(&bch->ch.list, &dch->dev.bchannels); hc->chan[i + ch].bch = bch; - test_and_set_bit(bch->nr & 0x1f, - &dch->dev.channelmap[bch->nr >> 5]); + set_channelmap(bch->nr, dch->dev.channelmap); } ret = mISDN_register_device(&dch->dev, hc->name); if (ret) diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c index 4ba4cc364c9..e5a20f9542d 100644 --- a/drivers/isdn/mISDN/socket.c +++ b/drivers/isdn/mISDN/socket.c @@ -379,7 +379,7 @@ data_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) di.Bprotocols = dev->Bprotocols | get_all_Bprotocols(); di.protocol = dev->D.protocol; memcpy(di.channelmap, dev->channelmap, - MISDN_CHMAP_SIZE * 4); + sizeof(di.channelmap)); di.nrbchan = dev->nrbchan; strcpy(di.name, dev->name); if (copy_to_user((void __user *)arg, &di, sizeof(di))) @@ -637,7 +637,7 @@ base_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) di.Bprotocols = dev->Bprotocols | get_all_Bprotocols(); di.protocol = dev->D.protocol; memcpy(di.channelmap, dev->channelmap, - MISDN_CHMAP_SIZE * 4); + sizeof(di.channelmap)); di.nrbchan = dev->nrbchan; strcpy(di.name, dev->name); if (copy_to_user((void __user *)arg, &di, sizeof(di))) diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h index 5c948f33781..8f2d60da04e 100644 --- a/include/linux/mISDNif.h +++ b/include/linux/mISDNif.h @@ -37,7 +37,7 @@ */ #define MISDN_MAJOR_VERSION 1 #define MISDN_MINOR_VERSION 0 -#define MISDN_RELEASE 18 +#define MISDN_RELEASE 19 /* primitives for information exchange * generell format @@ -242,7 +242,8 @@ struct mISDNhead { #define TEI_SAPI 63 #define CTRL_SAPI 0 -#define MISDN_CHMAP_SIZE 4 +#define MISDN_MAX_CHANNEL 127 +#define MISDN_CHMAP_SIZE ((MISDN_MAX_CHANNEL + 1) >> 3) #define SOL_MISDN 0 @@ -275,11 +276,32 @@ struct mISDN_devinfo { u_int Dprotocols; u_int Bprotocols; u_int protocol; - u_long channelmap[MISDN_CHMAP_SIZE]; + u_char channelmap[MISDN_CHMAP_SIZE]; u_int nrbchan; char name[MISDN_MAX_IDLEN]; }; +static inline int +test_channelmap(u_int nr, u_char *map) +{ + if (nr <= MISDN_MAX_CHANNEL) + return map[nr >> 3] & (1 << (nr & 7)); + else + return 0; +} + +static inline void +set_channelmap(u_int nr, u_char *map) +{ + map[nr >> 3] |= (1 << (nr & 7)); +} + +static inline void +clear_channelmap(u_int nr, u_char *map) +{ + map[nr >> 3] &= ~(1 << (nr & 7)); +} + /* CONTROL_CHANNEL parameters */ #define MISDN_CTRL_GETOP 0x0000 #define MISDN_CTRL_LOOP 0x0001 @@ -405,7 +427,7 @@ struct mISDNdevice { u_int Dprotocols; u_int Bprotocols; u_int nrbchan; - u_long channelmap[MISDN_CHMAP_SIZE]; + u_char channelmap[MISDN_CHMAP_SIZE]; struct list_head bchannels; struct mISDNchannel *teimgr; struct device dev; @@ -430,7 +452,7 @@ struct mISDNstack { #endif }; -/* global alloc/queue dunctions */ +/* global alloc/queue functions */ static inline struct sk_buff * mI_alloc_skb(unsigned int len, gfp_t gfp_mask) -- GitLab From b3e0aeeb7e0f89791c4c3bdfd98b36074c5178e6 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Sat, 2 Aug 2008 16:35:53 +0200 Subject: [PATCH 0637/1024] Fix remaining big endian issue of hfcmulti The driver was not so bad at big endian at all, only the optimised fifo read/write functions need a fix, with this fix the driver works on a pegasus PPC machine. Signed-off-by: Karsten Keil --- drivers/isdn/hardware/mISDN/hfcmulti.c | 27 +++++++++++++------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index 10144e871c0..e36360a583d 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -140,7 +140,7 @@ * #define HFC_REGISTER_DEBUG */ -static const char *hfcmulti_revision = "2.00"; +static const char *hfcmulti_revision = "2.01"; #include #include @@ -427,12 +427,12 @@ write_fifo_regio(struct hfc_multi *hc, u_char *data, int len) { outb(A_FIFO_DATA0, (hc->pci_iobase)+4); while (len>>2) { - outl(*(u32 *)data, hc->pci_iobase); + outl(cpu_to_le32(*(u32 *)data), hc->pci_iobase); data += 4; len -= 4; } while (len>>1) { - outw(*(u16 *)data, hc->pci_iobase); + outw(cpu_to_le16(*(u16 *)data), hc->pci_iobase); data += 2; len -= 2; } @@ -447,17 +447,19 @@ void write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len) { while (len>>2) { - writel(*(u32 *)data, (hc->pci_membase)+A_FIFO_DATA0); + writel(cpu_to_le32(*(u32 *)data), + hc->pci_membase + A_FIFO_DATA0); data += 4; len -= 4; } while (len>>1) { - writew(*(u16 *)data, (hc->pci_membase)+A_FIFO_DATA0); + writew(cpu_to_le16(*(u16 *)data), + hc->pci_membase + A_FIFO_DATA0); data += 2; len -= 2; } while (len) { - writeb(*data, (hc->pci_membase)+A_FIFO_DATA0); + writeb(*data, hc->pci_membase + A_FIFO_DATA0); data++; len--; } @@ -468,12 +470,12 @@ read_fifo_regio(struct hfc_multi *hc, u_char *data, int len) { outb(A_FIFO_DATA0, (hc->pci_iobase)+4); while (len>>2) { - *(u32 *)data = inl(hc->pci_iobase); + *(u32 *)data = le32_to_cpu(inl(hc->pci_iobase)); data += 4; len -= 4; } while (len>>1) { - *(u16 *)data = inw(hc->pci_iobase); + *(u16 *)data = le16_to_cpu(inw(hc->pci_iobase)); data += 2; len -= 2; } @@ -490,18 +492,18 @@ read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len) { while (len>>2) { *(u32 *)data = - readl((hc->pci_membase)+A_FIFO_DATA0); + le32_to_cpu(readl(hc->pci_membase + A_FIFO_DATA0)); data += 4; len -= 4; } while (len>>1) { *(u16 *)data = - readw((hc->pci_membase)+A_FIFO_DATA0); + le16_to_cpu(readw(hc->pci_membase + A_FIFO_DATA0)); data += 2; len -= 2; } while (len) { - *data = readb((hc->pci_membase)+A_FIFO_DATA0); + *data = readb(hc->pci_membase + A_FIFO_DATA0); data++; len--; } @@ -5251,9 +5253,6 @@ HFCmulti_init(void) if (debug & DEBUG_HFCMULTI_INIT) printk(KERN_DEBUG "%s: init entered\n", __func__); -#ifdef __BIG_ENDIAN -#error "not running on big endian machines now" -#endif hfc_interrupt = symbol_get(ztdummy_extern_interrupt); register_interrupt = symbol_get(ztdummy_register_interrupt); unregister_interrupt = symbol_get(ztdummy_unregister_interrupt); -- GitLab From 31981db0d0b665713ab3e9531f936fdb67947225 Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Sat, 2 Aug 2008 16:40:37 +0200 Subject: [PATCH 0638/1024] Add DIP switch readout for HFC-4S IOB4ST Also the HFC-4S IOB4ST has DIP switches and jumpers to configure the port. Signed-off-by: Karsten Keil --- drivers/isdn/hardware/mISDN/hfcmulti.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index e36360a583d..1eac03f39d0 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -140,7 +140,7 @@ * #define HFC_REGISTER_DEBUG */ -static const char *hfcmulti_revision = "2.01"; +static const char *hfcmulti_revision = "2.02"; #include #include @@ -5052,12 +5052,12 @@ static void __devexit hfc_remove_pci(struct pci_dev *pdev) static const struct hm_map hfcm_map[] = { /*0*/ {VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0}, -/*1*/ {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S}, +/*1*/ {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0}, /*2*/ {VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0}, /*3*/ {VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0}, /*4*/ {VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0}, /*5*/ {VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0}, -/*6*/ {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, 0, 0}, +/*6*/ {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0}, /*7*/ {VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0}, /*8*/ {VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO}, /*9*/ {VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0}, -- GitLab From 84209e02de48d72289650cc5a7ae8dd18223620f Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Fri, 1 Aug 2008 20:28:47 +0200 Subject: [PATCH 0639/1024] mm: dont clear PG_uptodate on truncate/invalidate Brian Wang reported that a FUSE filesystem exported through NFS could return I/O errors on read. This was traced to splice_direct_to_actor() returning a short or zero count when racing with page invalidation. However this is not FUSE or NFSD specific, other filesystems (notably NFS) also call invalidate_inode_pages2() to purge stale data from the cache. If this happens while such pages are sitting in a pipe buffer, then splice(2) from the pipe can return zero, and read(2) from the pipe can return ENODATA. The zero return is especially bad, since it implies end-of-file or disconnected pipe/socket, and is documented as such for splice. But returning an error for read() is also nasty, when in fact there was no error (data becoming stale is not an error). The same problems can be triggered by "hole punching" with madvise(MADV_REMOVE). Fix this by not clearing the PG_uptodate flag on truncation and invalidation. Signed-off-by: Miklos Szeredi Acked-by: Nick Piggin Cc: Andrew Morton Cc: Jens Axboe Signed-off-by: Linus Torvalds --- mm/truncate.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/mm/truncate.c b/mm/truncate.c index e68443d7456..894e9a70699 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -104,7 +104,6 @@ truncate_complete_page(struct address_space *mapping, struct page *page) cancel_dirty_page(page, PAGE_CACHE_SIZE); remove_from_page_cache(page); - ClearPageUptodate(page); ClearPageMappedToDisk(page); page_cache_release(page); /* pagecache ref */ } @@ -356,7 +355,6 @@ invalidate_complete_page2(struct address_space *mapping, struct page *page) BUG_ON(PagePrivate(page)); __remove_from_page_cache(page); spin_unlock_irq(&mapping->tree_lock); - ClearPageUptodate(page); page_cache_release(page); /* pagecache ref */ return 1; failed: -- GitLab From 17263849c7ad2279667dd298083eceefcd1b5845 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Sat, 2 Aug 2008 13:59:37 +0900 Subject: [PATCH 0640/1024] fat: Fix allow_utime option FAT has to handle the newly introduced ATTR_TIMES_SET for allow_utime option. Signed-off-by: OGAWA Hirofumi Signed-off-by: Linus Torvalds --- fs/fat/file.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/fat/file.c b/fs/fat/file.c index 8707a8cfa02..ddde37025ca 100644 --- a/fs/fat/file.c +++ b/fs/fat/file.c @@ -313,6 +313,8 @@ static int fat_allow_set_time(struct msdos_sb_info *sbi, struct inode *inode) return 0; } +#define TIMES_SET_FLAGS (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET) + int fat_setattr(struct dentry *dentry, struct iattr *attr) { struct msdos_sb_info *sbi = MSDOS_SB(dentry->d_sb); @@ -336,9 +338,9 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr) /* Check for setting the inode time. */ ia_valid = attr->ia_valid; - if (ia_valid & (ATTR_MTIME_SET | ATTR_ATIME_SET)) { + if (ia_valid & TIMES_SET_FLAGS) { if (fat_allow_set_time(sbi, inode)) - attr->ia_valid &= ~(ATTR_MTIME_SET | ATTR_ATIME_SET); + attr->ia_valid &= ~TIMES_SET_FLAGS; } error = inode_change_ok(inode, attr); -- GitLab From 85ebd00334099fd5d296bcae74a66c943d46686d Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sat, 2 Aug 2008 19:12:23 +0200 Subject: [PATCH 0641/1024] Fix IHEX firmware generation/loading Fix both the IHEX firmware generation (len field always null, and EOF marker a byte too short) and loading (struct ihex_binrec needs to be packed to reflect the on-disk structure). Signed-off-by: Marc Zyngier Signed-off-by: David Woodhouse --- firmware/ihex2fw.c | 6 +++--- include/linux/ihex.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/firmware/ihex2fw.c b/firmware/ihex2fw.c index 660b191ed75..8f7fdaa9e01 100644 --- a/firmware/ihex2fw.c +++ b/firmware/ihex2fw.c @@ -250,19 +250,19 @@ static void file_record(struct ihex_binrec *record) static int output_records(int outfd) { - unsigned char zeroes[5] = {0, 0, 0, 0, 0}; + unsigned char zeroes[6] = {0, 0, 0, 0, 0, 0}; struct ihex_binrec *p = records; while (p) { uint16_t writelen = (p->len + 9) & ~3; p->addr = htonl(p->addr); - p->len = htonl(p->len); + p->len = htons(p->len); write(outfd, &p->addr, writelen); p = p->next; } /* EOF record is zero length, since we don't bother to represent the type field in the binary version */ - write(outfd, zeroes, 5); + write(outfd, zeroes, 6); return 0; } diff --git a/include/linux/ihex.h b/include/linux/ihex.h index 2baace2788a..31d8629e75a 100644 --- a/include/linux/ihex.h +++ b/include/linux/ihex.h @@ -18,7 +18,7 @@ struct ihex_binrec { __be32 addr; __be16 len; uint8_t data[0]; -} __attribute__((aligned(4))); +} __attribute__((packed)); /* Find the next record, taking into account the 4-byte alignment */ static inline const struct ihex_binrec * -- GitLab From 8401d92ba46a1e859464cbd9c9ee304f6e361da3 Mon Sep 17 00:00:00 2001 From: David Moore Date: Tue, 29 Jul 2008 23:46:25 -0700 Subject: [PATCH 0642/1024] firewire: Preserve response data alignment bug when it is harmless Recently, a bug having to do with the alignment of transaction response data was fixed. However, some apps such as libdc1394 relied on the presence of that bug in order to function correctly. In order to stay compatible with old versions of those apps, this patch preserves the bug in cases where it is harmless to normal operation (such as the single quadlet read) due to a simple duplication of data. This guarantees maximum compatability for those users who are using the old app with the fixed kernel. Signed-off-by: David Moore Signed-off-by: Stefan Richter --- drivers/firewire/fw-cdev.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c index bc81d6fcd2f..2e6d5848d21 100644 --- a/drivers/firewire/fw-cdev.c +++ b/drivers/firewire/fw-cdev.c @@ -369,22 +369,33 @@ complete_transaction(struct fw_card *card, int rcode, struct response *response = data; struct client *client = response->client; unsigned long flags; + struct fw_cdev_event_response *r = &response->response; - if (length < response->response.length) - response->response.length = length; + if (length < r->length) + r->length = length; if (rcode == RCODE_COMPLETE) - memcpy(response->response.data, payload, - response->response.length); + memcpy(r->data, payload, r->length); spin_lock_irqsave(&client->lock, flags); list_del(&response->resource.link); spin_unlock_irqrestore(&client->lock, flags); - response->response.type = FW_CDEV_EVENT_RESPONSE; - response->response.rcode = rcode; - queue_event(client, &response->event, &response->response, - sizeof(response->response) + response->response.length, - NULL, 0); + r->type = FW_CDEV_EVENT_RESPONSE; + r->rcode = rcode; + + /* + * In the case that sizeof(*r) doesn't align with the position of the + * data, and the read is short, preserve an extra copy of the data + * to stay compatible with a pre-2.6.27 bug. Since the bug is harmless + * for short reads and some apps depended on it, this is both safe + * and prudent for compatibility. + */ + if (r->length <= sizeof(*r) - offsetof(typeof(*r), data)) + queue_event(client, &response->event, r, sizeof(*r), + r->data, r->length); + else + queue_event(client, &response->event, r, sizeof(*r) + r->length, + NULL, 0); } static int ioctl_send_request(struct client *client, void *buffer) -- GitLab From 4baa9922430662431231ac637adedddbb0cfb2d7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 2 Aug 2008 10:55:55 +0100 Subject: [PATCH 0643/1024] [ARM] move include/asm-arm to arch/arm/include/asm Move platform independent header files to arch/arm/include/asm, leaving those in asm/arch* and asm/plat* alone. Signed-off-by: Russell King --- {include/asm-arm => arch/arm/include/asm}/Kbuild | 0 {include/asm-arm => arch/arm/include/asm}/a.out-core.h | 0 {include/asm-arm => arch/arm/include/asm}/a.out.h | 0 {include/asm-arm => arch/arm/include/asm}/assembler.h | 2 +- {include/asm-arm => arch/arm/include/asm}/atomic.h | 2 +- {include/asm-arm => arch/arm/include/asm}/auxvec.h | 0 {include/asm-arm => arch/arm/include/asm}/bitops.h | 0 {include/asm-arm => arch/arm/include/asm}/bug.h | 0 {include/asm-arm => arch/arm/include/asm}/bugs.h | 2 +- {include/asm-arm => arch/arm/include/asm}/byteorder.h | 2 +- {include/asm-arm => arch/arm/include/asm}/cache.h | 2 +- {include/asm-arm => arch/arm/include/asm}/cacheflush.h | 2 +- {include/asm-arm => arch/arm/include/asm}/checksum.h | 2 +- {include/asm-arm => arch/arm/include/asm}/cnt32_to_63.h | 0 {include/asm-arm => arch/arm/include/asm}/cpu-multi32.h | 2 +- {include/asm-arm => arch/arm/include/asm}/cpu-single.h | 2 +- {include/asm-arm => arch/arm/include/asm}/cpu.h | 2 +- {include/asm-arm => arch/arm/include/asm}/cputime.h | 0 {include/asm-arm => arch/arm/include/asm}/current.h | 0 {include/asm-arm => arch/arm/include/asm}/delay.h | 0 {include/asm-arm => arch/arm/include/asm}/device.h | 0 {include/asm-arm => arch/arm/include/asm}/div64.h | 0 {include/asm-arm => arch/arm/include/asm}/dma-mapping.h | 0 {include/asm-arm => arch/arm/include/asm}/dma.h | 0 {include/asm-arm => arch/arm/include/asm}/domain.h | 2 +- {include/asm-arm => arch/arm/include/asm}/ecard.h | 2 +- {include/asm-arm => arch/arm/include/asm}/elf.h | 0 {include/asm-arm => arch/arm/include/asm}/emergency-restart.h | 0 {include/asm-arm => arch/arm/include/asm}/errno.h | 0 {include/asm-arm => arch/arm/include/asm}/fb.h | 0 {include/asm-arm => arch/arm/include/asm}/fcntl.h | 0 {include/asm-arm => arch/arm/include/asm}/fiq.h | 2 +- {include/asm-arm => arch/arm/include/asm}/flat.h | 2 +- {include/asm-arm => arch/arm/include/asm}/floppy.h | 2 +- {include/asm-arm => arch/arm/include/asm}/fpstate.h | 2 +- {include/asm-arm => arch/arm/include/asm}/ftrace.h | 0 {include/asm-arm => arch/arm/include/asm}/futex.h | 0 {include/asm-arm => arch/arm/include/asm}/glue.h | 2 +- {include/asm-arm => arch/arm/include/asm}/gpio.h | 0 {include/asm-arm => arch/arm/include/asm}/hardirq.h | 0 {include/asm-arm => arch/arm/include/asm}/hardware.h | 2 +- .../asm-arm => arch/arm/include/asm}/hardware/arm_timer.h | 0 {include/asm-arm => arch/arm/include/asm}/hardware/arm_twd.h | 0 .../asm-arm => arch/arm/include/asm}/hardware/cache-l2x0.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/clps7111.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/cs89712.h | 2 +- .../asm-arm => arch/arm/include/asm}/hardware/debug-8250.S | 2 +- .../asm-arm => arch/arm/include/asm}/hardware/debug-pl01x.S | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/dec21285.h | 2 +- .../arm/include/asm}/hardware/entry-macro-iomd.S | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/ep7211.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/ep7212.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/gic.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/icst307.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/icst525.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/ioc.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/iomd.h | 2 +- .../asm-arm => arch/arm/include/asm}/hardware/iop3xx-adma.h | 0 .../asm-arm => arch/arm/include/asm}/hardware/iop3xx-gpio.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/iop3xx.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/iop_adma.h | 0 {include/asm-arm => arch/arm/include/asm}/hardware/it8152.h | 0 .../asm-arm => arch/arm/include/asm}/hardware/linkup-l1110.h | 0 {include/asm-arm => arch/arm/include/asm}/hardware/locomo.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/memc.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/pci_v3.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/sa1111.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hardware/scoop.h | 0 .../asm-arm => arch/arm/include/asm}/hardware/sharpsl_pm.h | 0 {include/asm-arm => arch/arm/include/asm}/hardware/ssp.h | 0 {include/asm-arm => arch/arm/include/asm}/hardware/uengine.h | 0 {include/asm-arm => arch/arm/include/asm}/hardware/vic.h | 2 +- {include/asm-arm => arch/arm/include/asm}/hw_irq.h | 0 {include/asm-arm => arch/arm/include/asm}/hwcap.h | 0 {include/asm-arm => arch/arm/include/asm}/ide.h | 2 +- {include/asm-arm => arch/arm/include/asm}/io.h | 2 +- {include/asm-arm => arch/arm/include/asm}/ioctl.h | 0 {include/asm-arm => arch/arm/include/asm}/ioctls.h | 0 {include/asm-arm => arch/arm/include/asm}/ipcbuf.h | 0 {include/asm-arm => arch/arm/include/asm}/irq.h | 0 {include/asm-arm => arch/arm/include/asm}/irq_regs.h | 0 {include/asm-arm => arch/arm/include/asm}/irqflags.h | 0 {include/asm-arm => arch/arm/include/asm}/kdebug.h | 0 {include/asm-arm => arch/arm/include/asm}/kexec.h | 0 {include/asm-arm => arch/arm/include/asm}/kgdb.h | 0 {include/asm-arm => arch/arm/include/asm}/kmap_types.h | 0 {include/asm-arm => arch/arm/include/asm}/kprobes.h | 2 +- {include/asm-arm => arch/arm/include/asm}/leds.h | 2 +- {include/asm-arm => arch/arm/include/asm}/limits.h | 0 {include/asm-arm => arch/arm/include/asm}/linkage.h | 0 {include/asm-arm => arch/arm/include/asm}/local.h | 0 {include/asm-arm => arch/arm/include/asm}/locks.h | 2 +- {include/asm-arm => arch/arm/include/asm}/mach/arch.h | 2 +- {include/asm-arm => arch/arm/include/asm}/mach/dma.h | 2 +- {include/asm-arm => arch/arm/include/asm}/mach/flash.h | 2 +- {include/asm-arm => arch/arm/include/asm}/mach/irda.h | 2 +- {include/asm-arm => arch/arm/include/asm}/mach/irq.h | 2 +- {include/asm-arm => arch/arm/include/asm}/mach/map.h | 2 +- {include/asm-arm => arch/arm/include/asm}/mach/mmc.h | 2 +- {include/asm-arm => arch/arm/include/asm}/mach/pci.h | 2 +- {include/asm-arm => arch/arm/include/asm}/mach/serial_at91.h | 2 +- .../asm-arm => arch/arm/include/asm}/mach/serial_sa1100.h | 4 ++-- .../asm-arm => arch/arm/include/asm}/mach/sharpsl_param.h | 0 {include/asm-arm => arch/arm/include/asm}/mach/time.h | 2 +- {include/asm-arm => arch/arm/include/asm}/mach/udc_pxa2xx.h | 2 +- {include/asm-arm => arch/arm/include/asm}/mc146818rtc.h | 0 {include/asm-arm => arch/arm/include/asm}/memory.h | 2 +- {include/asm-arm => arch/arm/include/asm}/mman.h | 0 {include/asm-arm => arch/arm/include/asm}/mmu.h | 0 {include/asm-arm => arch/arm/include/asm}/mmu_context.h | 2 +- {include/asm-arm => arch/arm/include/asm}/mmzone.h | 2 +- {include/asm-arm => arch/arm/include/asm}/module.h | 0 {include/asm-arm => arch/arm/include/asm}/msgbuf.h | 0 {include/asm-arm => arch/arm/include/asm}/mtd-xip.h | 0 {include/asm-arm => arch/arm/include/asm}/mutex.h | 2 +- {include/asm-arm => arch/arm/include/asm}/nwflash.h | 0 {include/asm-arm => arch/arm/include/asm}/page-nommu.h | 2 +- {include/asm-arm => arch/arm/include/asm}/page.h | 2 +- {include/asm-arm => arch/arm/include/asm}/param.h | 2 +- {include/asm-arm => arch/arm/include/asm}/parport.h | 2 +- {include/asm-arm => arch/arm/include/asm}/pci.h | 0 {include/asm-arm => arch/arm/include/asm}/percpu.h | 0 {include/asm-arm => arch/arm/include/asm}/pgalloc.h | 2 +- {include/asm-arm => arch/arm/include/asm}/pgtable-hwdef.h | 2 +- {include/asm-arm => arch/arm/include/asm}/pgtable-nommu.h | 2 +- {include/asm-arm => arch/arm/include/asm}/pgtable.h | 2 +- {include/asm-arm => arch/arm/include/asm}/poll.h | 0 {include/asm-arm => arch/arm/include/asm}/posix_types.h | 2 +- {include/asm-arm => arch/arm/include/asm}/proc-fns.h | 2 +- {include/asm-arm => arch/arm/include/asm}/processor.h | 2 +- {include/asm-arm => arch/arm/include/asm}/procinfo.h | 2 +- {include/asm-arm => arch/arm/include/asm}/ptrace.h | 2 +- {include/asm-arm => arch/arm/include/asm}/resource.h | 0 {include/asm-arm => arch/arm/include/asm}/scatterlist.h | 0 {include/asm-arm => arch/arm/include/asm}/sections.h | 0 {include/asm-arm => arch/arm/include/asm}/segment.h | 0 {include/asm-arm => arch/arm/include/asm}/sembuf.h | 0 {include/asm-arm => arch/arm/include/asm}/serial.h | 2 +- {include/asm-arm => arch/arm/include/asm}/setup.h | 0 {include/asm-arm => arch/arm/include/asm}/shmbuf.h | 0 {include/asm-arm => arch/arm/include/asm}/shmparam.h | 0 {include/asm-arm => arch/arm/include/asm}/sigcontext.h | 0 {include/asm-arm => arch/arm/include/asm}/siginfo.h | 0 {include/asm-arm => arch/arm/include/asm}/signal.h | 0 {include/asm-arm => arch/arm/include/asm}/sizes.h | 0 {include/asm-arm => arch/arm/include/asm}/smp.h | 4 ++-- {include/asm-arm => arch/arm/include/asm}/socket.h | 0 {include/asm-arm => arch/arm/include/asm}/sockios.h | 0 {include/asm-arm => arch/arm/include/asm}/sparsemem.h | 0 {include/asm-arm => arch/arm/include/asm}/spinlock.h | 0 {include/asm-arm => arch/arm/include/asm}/spinlock_types.h | 0 {include/asm-arm => arch/arm/include/asm}/stat.h | 0 {include/asm-arm => arch/arm/include/asm}/statfs.h | 0 {include/asm-arm => arch/arm/include/asm}/string.h | 0 {include/asm-arm => arch/arm/include/asm}/suspend.h | 0 {include/asm-arm => arch/arm/include/asm}/system.h | 0 {include/asm-arm => arch/arm/include/asm}/termbits.h | 0 {include/asm-arm => arch/arm/include/asm}/termios.h | 0 {include/asm-arm => arch/arm/include/asm}/therm.h | 2 +- {include/asm-arm => arch/arm/include/asm}/thread_info.h | 4 ++-- {include/asm-arm => arch/arm/include/asm}/thread_notify.h | 2 +- {include/asm-arm => arch/arm/include/asm}/timex.h | 2 +- {include/asm-arm => arch/arm/include/asm}/tlb.h | 2 +- {include/asm-arm => arch/arm/include/asm}/tlbflush.h | 2 +- {include/asm-arm => arch/arm/include/asm}/topology.h | 0 {include/asm-arm => arch/arm/include/asm}/traps.h | 0 {include/asm-arm => arch/arm/include/asm}/types.h | 0 {include/asm-arm => arch/arm/include/asm}/uaccess.h | 2 +- {include/asm-arm => arch/arm/include/asm}/ucontext.h | 0 {include/asm-arm => arch/arm/include/asm}/unaligned.h | 0 {include/asm-arm => arch/arm/include/asm}/unistd.h | 2 +- {include/asm-arm => arch/arm/include/asm}/user.h | 0 {include/asm-arm => arch/arm/include/asm}/vfp.h | 2 +- {include/asm-arm => arch/arm/include/asm}/vfpmacros.h | 2 +- {include/asm-arm => arch/arm/include/asm}/vga.h | 0 {include/asm-arm => arch/arm/include/asm}/xor.h | 2 +- arch/arm/kernel/head-common.S | 2 +- arch/arm/lib/getuser.S | 2 +- arch/arm/lib/putuser.S | 2 +- arch/arm/mm/ioremap.c | 2 +- arch/arm/mm/proc-arm720.S | 2 +- arch/arm/nwfpe/fpa11.h | 2 +- 182 files changed, 95 insertions(+), 95 deletions(-) rename {include/asm-arm => arch/arm/include/asm}/Kbuild (100%) rename {include/asm-arm => arch/arm/include/asm}/a.out-core.h (100%) rename {include/asm-arm => arch/arm/include/asm}/a.out.h (100%) rename {include/asm-arm => arch/arm/include/asm}/assembler.h (98%) rename {include/asm-arm => arch/arm/include/asm}/atomic.h (99%) rename {include/asm-arm => arch/arm/include/asm}/auxvec.h (100%) rename {include/asm-arm => arch/arm/include/asm}/bitops.h (100%) rename {include/asm-arm => arch/arm/include/asm}/bug.h (100%) rename {include/asm-arm => arch/arm/include/asm}/bugs.h (93%) rename {include/asm-arm => arch/arm/include/asm}/byteorder.h (97%) rename {include/asm-arm => arch/arm/include/asm}/cache.h (80%) rename {include/asm-arm => arch/arm/include/asm}/cacheflush.h (99%) rename {include/asm-arm => arch/arm/include/asm}/checksum.h (98%) rename {include/asm-arm => arch/arm/include/asm}/cnt32_to_63.h (100%) rename {include/asm-arm => arch/arm/include/asm}/cpu-multi32.h (97%) rename {include/asm-arm => arch/arm/include/asm}/cpu-single.h (97%) rename {include/asm-arm => arch/arm/include/asm}/cpu.h (93%) rename {include/asm-arm => arch/arm/include/asm}/cputime.h (100%) rename {include/asm-arm => arch/arm/include/asm}/current.h (100%) rename {include/asm-arm => arch/arm/include/asm}/delay.h (100%) rename {include/asm-arm => arch/arm/include/asm}/device.h (100%) rename {include/asm-arm => arch/arm/include/asm}/div64.h (100%) rename {include/asm-arm => arch/arm/include/asm}/dma-mapping.h (100%) rename {include/asm-arm => arch/arm/include/asm}/dma.h (100%) rename {include/asm-arm => arch/arm/include/asm}/domain.h (98%) rename {include/asm-arm => arch/arm/include/asm}/ecard.h (99%) rename {include/asm-arm => arch/arm/include/asm}/elf.h (100%) rename {include/asm-arm => arch/arm/include/asm}/emergency-restart.h (100%) rename {include/asm-arm => arch/arm/include/asm}/errno.h (100%) rename {include/asm-arm => arch/arm/include/asm}/fb.h (100%) rename {include/asm-arm => arch/arm/include/asm}/fcntl.h (100%) rename {include/asm-arm => arch/arm/include/asm}/fiq.h (96%) rename {include/asm-arm => arch/arm/include/asm}/flat.h (90%) rename {include/asm-arm => arch/arm/include/asm}/floppy.h (99%) rename {include/asm-arm => arch/arm/include/asm}/fpstate.h (97%) rename {include/asm-arm => arch/arm/include/asm}/ftrace.h (100%) rename {include/asm-arm => arch/arm/include/asm}/futex.h (100%) rename {include/asm-arm => arch/arm/include/asm}/glue.h (99%) rename {include/asm-arm => arch/arm/include/asm}/gpio.h (100%) rename {include/asm-arm => arch/arm/include/asm}/hardirq.h (100%) rename {include/asm-arm => arch/arm/include/asm}/hardware.h (90%) rename {include/asm-arm => arch/arm/include/asm}/hardware/arm_timer.h (100%) rename {include/asm-arm => arch/arm/include/asm}/hardware/arm_twd.h (100%) rename {include/asm-arm => arch/arm/include/asm}/hardware/cache-l2x0.h (97%) rename {include/asm-arm => arch/arm/include/asm}/hardware/clps7111.h (99%) rename {include/asm-arm => arch/arm/include/asm}/hardware/cs89712.h (97%) rename {include/asm-arm => arch/arm/include/asm}/hardware/debug-8250.S (93%) rename {include/asm-arm => arch/arm/include/asm}/hardware/debug-pl01x.S (93%) rename {include/asm-arm => arch/arm/include/asm}/hardware/dec21285.h (99%) rename {include/asm-arm => arch/arm/include/asm}/hardware/entry-macro-iomd.S (99%) rename {include/asm-arm => arch/arm/include/asm}/hardware/ep7211.h (96%) rename {include/asm-arm => arch/arm/include/asm}/hardware/ep7212.h (98%) rename {include/asm-arm => arch/arm/include/asm}/hardware/gic.h (96%) rename {include/asm-arm => arch/arm/include/asm}/hardware/icst307.h (96%) rename {include/asm-arm => arch/arm/include/asm}/hardware/icst525.h (96%) rename {include/asm-arm => arch/arm/include/asm}/hardware/ioc.h (97%) rename {include/asm-arm => arch/arm/include/asm}/hardware/iomd.h (99%) rename {include/asm-arm => arch/arm/include/asm}/hardware/iop3xx-adma.h (100%) rename {include/asm-arm => arch/arm/include/asm}/hardware/iop3xx-gpio.h (97%) rename {include/asm-arm => arch/arm/include/asm}/hardware/iop3xx.h (99%) rename {include/asm-arm => arch/arm/include/asm}/hardware/iop_adma.h (100%) rename {include/asm-arm => arch/arm/include/asm}/hardware/it8152.h (100%) rename {include/asm-arm => arch/arm/include/asm}/hardware/linkup-l1110.h (100%) rename {include/asm-arm => arch/arm/include/asm}/hardware/locomo.h (99%) rename {include/asm-arm => arch/arm/include/asm}/hardware/memc.h (93%) rename {include/asm-arm => arch/arm/include/asm}/hardware/pci_v3.h (99%) rename {include/asm-arm => arch/arm/include/asm}/hardware/sa1111.h (99%) rename {include/asm-arm => arch/arm/include/asm}/hardware/scoop.h (100%) rename {include/asm-arm => arch/arm/include/asm}/hardware/sharpsl_pm.h (100%) rename {include/asm-arm => arch/arm/include/asm}/hardware/ssp.h (100%) rename {include/asm-arm => arch/arm/include/asm}/hardware/uengine.h (100%) rename {include/asm-arm => arch/arm/include/asm}/hardware/vic.h (97%) rename {include/asm-arm => arch/arm/include/asm}/hw_irq.h (100%) rename {include/asm-arm => arch/arm/include/asm}/hwcap.h (100%) rename {include/asm-arm => arch/arm/include/asm}/ide.h (93%) rename {include/asm-arm => arch/arm/include/asm}/io.h (99%) rename {include/asm-arm => arch/arm/include/asm}/ioctl.h (100%) rename {include/asm-arm => arch/arm/include/asm}/ioctls.h (100%) rename {include/asm-arm => arch/arm/include/asm}/ipcbuf.h (100%) rename {include/asm-arm => arch/arm/include/asm}/irq.h (100%) rename {include/asm-arm => arch/arm/include/asm}/irq_regs.h (100%) rename {include/asm-arm => arch/arm/include/asm}/irqflags.h (100%) rename {include/asm-arm => arch/arm/include/asm}/kdebug.h (100%) rename {include/asm-arm => arch/arm/include/asm}/kexec.h (100%) rename {include/asm-arm => arch/arm/include/asm}/kgdb.h (100%) rename {include/asm-arm => arch/arm/include/asm}/kmap_types.h (100%) rename {include/asm-arm => arch/arm/include/asm}/kprobes.h (98%) rename {include/asm-arm => arch/arm/include/asm}/leds.h (96%) rename {include/asm-arm => arch/arm/include/asm}/limits.h (100%) rename {include/asm-arm => arch/arm/include/asm}/linkage.h (100%) rename {include/asm-arm => arch/arm/include/asm}/local.h (100%) rename {include/asm-arm => arch/arm/include/asm}/locks.h (99%) rename {include/asm-arm => arch/arm/include/asm}/mach/arch.h (97%) rename {include/asm-arm => arch/arm/include/asm}/mach/dma.h (97%) rename {include/asm-arm => arch/arm/include/asm}/mach/flash.h (96%) rename {include/asm-arm => arch/arm/include/asm}/mach/irda.h (93%) rename {include/asm-arm => arch/arm/include/asm}/mach/irq.h (96%) rename {include/asm-arm => arch/arm/include/asm}/mach/map.h (96%) rename {include/asm-arm => arch/arm/include/asm}/mach/mmc.h (88%) rename {include/asm-arm => arch/arm/include/asm}/mach/pci.h (98%) rename {include/asm-arm => arch/arm/include/asm}/mach/serial_at91.h (94%) rename {include/asm-arm => arch/arm/include/asm}/mach/serial_sa1100.h (86%) rename {include/asm-arm => arch/arm/include/asm}/mach/sharpsl_param.h (100%) rename {include/asm-arm => arch/arm/include/asm}/mach/time.h (97%) rename {include/asm-arm => arch/arm/include/asm}/mach/udc_pxa2xx.h (95%) rename {include/asm-arm => arch/arm/include/asm}/mc146818rtc.h (100%) rename {include/asm-arm => arch/arm/include/asm}/memory.h (99%) rename {include/asm-arm => arch/arm/include/asm}/mman.h (100%) rename {include/asm-arm => arch/arm/include/asm}/mmu.h (100%) rename {include/asm-arm => arch/arm/include/asm}/mmu_context.h (98%) rename {include/asm-arm => arch/arm/include/asm}/mmzone.h (94%) rename {include/asm-arm => arch/arm/include/asm}/module.h (100%) rename {include/asm-arm => arch/arm/include/asm}/msgbuf.h (100%) rename {include/asm-arm => arch/arm/include/asm}/mtd-xip.h (100%) rename {include/asm-arm => arch/arm/include/asm}/mutex.h (98%) rename {include/asm-arm => arch/arm/include/asm}/nwflash.h (100%) rename {include/asm-arm => arch/arm/include/asm}/page-nommu.h (96%) rename {include/asm-arm => arch/arm/include/asm}/page.h (99%) rename {include/asm-arm => arch/arm/include/asm}/param.h (95%) rename {include/asm-arm => arch/arm/include/asm}/parport.h (86%) rename {include/asm-arm => arch/arm/include/asm}/pci.h (100%) rename {include/asm-arm => arch/arm/include/asm}/percpu.h (100%) rename {include/asm-arm => arch/arm/include/asm}/pgalloc.h (98%) rename {include/asm-arm => arch/arm/include/asm}/pgtable-hwdef.h (98%) rename {include/asm-arm => arch/arm/include/asm}/pgtable-nommu.h (98%) rename {include/asm-arm => arch/arm/include/asm}/pgtable.h (99%) rename {include/asm-arm => arch/arm/include/asm}/poll.h (100%) rename {include/asm-arm => arch/arm/include/asm}/posix_types.h (98%) rename {include/asm-arm => arch/arm/include/asm}/proc-fns.h (99%) rename {include/asm-arm => arch/arm/include/asm}/processor.h (98%) rename {include/asm-arm => arch/arm/include/asm}/procinfo.h (97%) rename {include/asm-arm => arch/arm/include/asm}/ptrace.h (99%) rename {include/asm-arm => arch/arm/include/asm}/resource.h (100%) rename {include/asm-arm => arch/arm/include/asm}/scatterlist.h (100%) rename {include/asm-arm => arch/arm/include/asm}/sections.h (100%) rename {include/asm-arm => arch/arm/include/asm}/segment.h (100%) rename {include/asm-arm => arch/arm/include/asm}/sembuf.h (100%) rename {include/asm-arm => arch/arm/include/asm}/serial.h (91%) rename {include/asm-arm => arch/arm/include/asm}/setup.h (100%) rename {include/asm-arm => arch/arm/include/asm}/shmbuf.h (100%) rename {include/asm-arm => arch/arm/include/asm}/shmparam.h (100%) rename {include/asm-arm => arch/arm/include/asm}/sigcontext.h (100%) rename {include/asm-arm => arch/arm/include/asm}/siginfo.h (100%) rename {include/asm-arm => arch/arm/include/asm}/signal.h (100%) rename {include/asm-arm => arch/arm/include/asm}/sizes.h (100%) rename {include/asm-arm => arch/arm/include/asm}/smp.h (97%) rename {include/asm-arm => arch/arm/include/asm}/socket.h (100%) rename {include/asm-arm => arch/arm/include/asm}/sockios.h (100%) rename {include/asm-arm => arch/arm/include/asm}/sparsemem.h (100%) rename {include/asm-arm => arch/arm/include/asm}/spinlock.h (100%) rename {include/asm-arm => arch/arm/include/asm}/spinlock_types.h (100%) rename {include/asm-arm => arch/arm/include/asm}/stat.h (100%) rename {include/asm-arm => arch/arm/include/asm}/statfs.h (100%) rename {include/asm-arm => arch/arm/include/asm}/string.h (100%) rename {include/asm-arm => arch/arm/include/asm}/suspend.h (100%) rename {include/asm-arm => arch/arm/include/asm}/system.h (100%) rename {include/asm-arm => arch/arm/include/asm}/termbits.h (100%) rename {include/asm-arm => arch/arm/include/asm}/termios.h (100%) rename {include/asm-arm => arch/arm/include/asm}/therm.h (88%) rename {include/asm-arm => arch/arm/include/asm}/thread_info.h (97%) rename {include/asm-arm => arch/arm/include/asm}/thread_notify.h (96%) rename {include/asm-arm => arch/arm/include/asm}/timex.h (93%) rename {include/asm-arm => arch/arm/include/asm}/tlb.h (98%) rename {include/asm-arm => arch/arm/include/asm}/tlbflush.h (99%) rename {include/asm-arm => arch/arm/include/asm}/topology.h (100%) rename {include/asm-arm => arch/arm/include/asm}/traps.h (100%) rename {include/asm-arm => arch/arm/include/asm}/types.h (100%) rename {include/asm-arm => arch/arm/include/asm}/uaccess.h (99%) rename {include/asm-arm => arch/arm/include/asm}/ucontext.h (100%) rename {include/asm-arm => arch/arm/include/asm}/unaligned.h (100%) rename {include/asm-arm => arch/arm/include/asm}/unistd.h (99%) rename {include/asm-arm => arch/arm/include/asm}/user.h (100%) rename {include/asm-arm => arch/arm/include/asm}/vfp.h (98%) rename {include/asm-arm => arch/arm/include/asm}/vfpmacros.h (97%) rename {include/asm-arm => arch/arm/include/asm}/vga.h (100%) rename {include/asm-arm => arch/arm/include/asm}/xor.h (99%) diff --git a/include/asm-arm/Kbuild b/arch/arm/include/asm/Kbuild similarity index 100% rename from include/asm-arm/Kbuild rename to arch/arm/include/asm/Kbuild diff --git a/include/asm-arm/a.out-core.h b/arch/arm/include/asm/a.out-core.h similarity index 100% rename from include/asm-arm/a.out-core.h rename to arch/arm/include/asm/a.out-core.h diff --git a/include/asm-arm/a.out.h b/arch/arm/include/asm/a.out.h similarity index 100% rename from include/asm-arm/a.out.h rename to arch/arm/include/asm/a.out.h diff --git a/include/asm-arm/assembler.h b/arch/arm/include/asm/assembler.h similarity index 98% rename from include/asm-arm/assembler.h rename to arch/arm/include/asm/assembler.h index 911393b2c6f..6116e4893c0 100644 --- a/include/asm-arm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/assembler.h + * arch/arm/include/asm/assembler.h * * Copyright (C) 1996-2000 Russell King * diff --git a/include/asm-arm/atomic.h b/arch/arm/include/asm/atomic.h similarity index 99% rename from include/asm-arm/atomic.h rename to arch/arm/include/asm/atomic.h index 3b59f94b5a3..325f881ccb5 100644 --- a/include/asm-arm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/atomic.h + * arch/arm/include/asm/atomic.h * * Copyright (C) 1996 Russell King. * Copyright (C) 2002 Deep Blue Solutions Ltd. diff --git a/include/asm-arm/auxvec.h b/arch/arm/include/asm/auxvec.h similarity index 100% rename from include/asm-arm/auxvec.h rename to arch/arm/include/asm/auxvec.h diff --git a/include/asm-arm/bitops.h b/arch/arm/include/asm/bitops.h similarity index 100% rename from include/asm-arm/bitops.h rename to arch/arm/include/asm/bitops.h diff --git a/include/asm-arm/bug.h b/arch/arm/include/asm/bug.h similarity index 100% rename from include/asm-arm/bug.h rename to arch/arm/include/asm/bug.h diff --git a/include/asm-arm/bugs.h b/arch/arm/include/asm/bugs.h similarity index 93% rename from include/asm-arm/bugs.h rename to arch/arm/include/asm/bugs.h index ca54eb0f12d..a97f1ea708d 100644 --- a/include/asm-arm/bugs.h +++ b/arch/arm/include/asm/bugs.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/bugs.h + * arch/arm/include/asm/bugs.h * * Copyright (C) 1995-2003 Russell King * diff --git a/include/asm-arm/byteorder.h b/arch/arm/include/asm/byteorder.h similarity index 97% rename from include/asm-arm/byteorder.h rename to arch/arm/include/asm/byteorder.h index e6f7fcdc73b..4fbfb22f65a 100644 --- a/include/asm-arm/byteorder.h +++ b/arch/arm/include/asm/byteorder.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/byteorder.h + * arch/arm/include/asm/byteorder.h * * ARM Endian-ness. In little endian mode, the data bus is connected such * that byte accesses appear as: diff --git a/include/asm-arm/cache.h b/arch/arm/include/asm/cache.h similarity index 80% rename from include/asm-arm/cache.h rename to arch/arm/include/asm/cache.h index 31332c8ac04..cb7a9e97fd7 100644 --- a/include/asm-arm/cache.h +++ b/arch/arm/include/asm/cache.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/cache.h + * arch/arm/include/asm/cache.h */ #ifndef __ASMARM_CACHE_H #define __ASMARM_CACHE_H diff --git a/include/asm-arm/cacheflush.h b/arch/arm/include/asm/cacheflush.h similarity index 99% rename from include/asm-arm/cacheflush.h rename to arch/arm/include/asm/cacheflush.h index e68a1cbcc85..9073d9c6567 100644 --- a/include/asm-arm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/cacheflush.h + * arch/arm/include/asm/cacheflush.h * * Copyright (C) 1999-2002 Russell King * diff --git a/include/asm-arm/checksum.h b/arch/arm/include/asm/checksum.h similarity index 98% rename from include/asm-arm/checksum.h rename to arch/arm/include/asm/checksum.h index eaa0efd8d0d..6dcc1643086 100644 --- a/include/asm-arm/checksum.h +++ b/arch/arm/include/asm/checksum.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/checksum.h + * arch/arm/include/asm/checksum.h * * IP checksum routines * diff --git a/include/asm-arm/cnt32_to_63.h b/arch/arm/include/asm/cnt32_to_63.h similarity index 100% rename from include/asm-arm/cnt32_to_63.h rename to arch/arm/include/asm/cnt32_to_63.h diff --git a/include/asm-arm/cpu-multi32.h b/arch/arm/include/asm/cpu-multi32.h similarity index 97% rename from include/asm-arm/cpu-multi32.h rename to arch/arm/include/asm/cpu-multi32.h index 3479de9266e..e2b5b0b2116 100644 --- a/include/asm-arm/cpu-multi32.h +++ b/arch/arm/include/asm/cpu-multi32.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/cpu-multi32.h + * arch/arm/include/asm/cpu-multi32.h * * Copyright (C) 2000 Russell King * diff --git a/include/asm-arm/cpu-single.h b/arch/arm/include/asm/cpu-single.h similarity index 97% rename from include/asm-arm/cpu-single.h rename to arch/arm/include/asm/cpu-single.h index 0b120ee3609..f073a6d2a40 100644 --- a/include/asm-arm/cpu-single.h +++ b/arch/arm/include/asm/cpu-single.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/cpu-single.h + * arch/arm/include/asm/cpu-single.h * * Copyright (C) 2000 Russell King * diff --git a/include/asm-arm/cpu.h b/arch/arm/include/asm/cpu.h similarity index 93% rename from include/asm-arm/cpu.h rename to arch/arm/include/asm/cpu.h index 715426b9b08..634b2d7c612 100644 --- a/include/asm-arm/cpu.h +++ b/arch/arm/include/asm/cpu.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/cpu.h + * arch/arm/include/asm/cpu.h * * Copyright (C) 2004-2005 ARM Ltd. * diff --git a/include/asm-arm/cputime.h b/arch/arm/include/asm/cputime.h similarity index 100% rename from include/asm-arm/cputime.h rename to arch/arm/include/asm/cputime.h diff --git a/include/asm-arm/current.h b/arch/arm/include/asm/current.h similarity index 100% rename from include/asm-arm/current.h rename to arch/arm/include/asm/current.h diff --git a/include/asm-arm/delay.h b/arch/arm/include/asm/delay.h similarity index 100% rename from include/asm-arm/delay.h rename to arch/arm/include/asm/delay.h diff --git a/include/asm-arm/device.h b/arch/arm/include/asm/device.h similarity index 100% rename from include/asm-arm/device.h rename to arch/arm/include/asm/device.h diff --git a/include/asm-arm/div64.h b/arch/arm/include/asm/div64.h similarity index 100% rename from include/asm-arm/div64.h rename to arch/arm/include/asm/div64.h diff --git a/include/asm-arm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h similarity index 100% rename from include/asm-arm/dma-mapping.h rename to arch/arm/include/asm/dma-mapping.h diff --git a/include/asm-arm/dma.h b/arch/arm/include/asm/dma.h similarity index 100% rename from include/asm-arm/dma.h rename to arch/arm/include/asm/dma.h diff --git a/include/asm-arm/domain.h b/arch/arm/include/asm/domain.h similarity index 98% rename from include/asm-arm/domain.h rename to arch/arm/include/asm/domain.h index 3c12a762530..cc7ef408071 100644 --- a/include/asm-arm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/domain.h + * arch/arm/include/asm/domain.h * * Copyright (C) 1999 Russell King. * diff --git a/include/asm-arm/ecard.h b/arch/arm/include/asm/ecard.h similarity index 99% rename from include/asm-arm/ecard.h rename to arch/arm/include/asm/ecard.h index 5e22881a630..29f2610efc7 100644 --- a/include/asm-arm/ecard.h +++ b/arch/arm/include/asm/ecard.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/ecard.h + * arch/arm/include/asm/ecard.h * * definitions for expansion cards * diff --git a/include/asm-arm/elf.h b/arch/arm/include/asm/elf.h similarity index 100% rename from include/asm-arm/elf.h rename to arch/arm/include/asm/elf.h diff --git a/include/asm-arm/emergency-restart.h b/arch/arm/include/asm/emergency-restart.h similarity index 100% rename from include/asm-arm/emergency-restart.h rename to arch/arm/include/asm/emergency-restart.h diff --git a/include/asm-arm/errno.h b/arch/arm/include/asm/errno.h similarity index 100% rename from include/asm-arm/errno.h rename to arch/arm/include/asm/errno.h diff --git a/include/asm-arm/fb.h b/arch/arm/include/asm/fb.h similarity index 100% rename from include/asm-arm/fb.h rename to arch/arm/include/asm/fb.h diff --git a/include/asm-arm/fcntl.h b/arch/arm/include/asm/fcntl.h similarity index 100% rename from include/asm-arm/fcntl.h rename to arch/arm/include/asm/fcntl.h diff --git a/include/asm-arm/fiq.h b/arch/arm/include/asm/fiq.h similarity index 96% rename from include/asm-arm/fiq.h rename to arch/arm/include/asm/fiq.h index a3bad09e825..2242ce22ec6 100644 --- a/include/asm-arm/fiq.h +++ b/arch/arm/include/asm/fiq.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/fiq.h + * arch/arm/include/asm/fiq.h * * Support for FIQ on ARM architectures. * Written by Philip Blundell , 1998 diff --git a/include/asm-arm/flat.h b/arch/arm/include/asm/flat.h similarity index 90% rename from include/asm-arm/flat.h rename to arch/arm/include/asm/flat.h index 9918aa46d9e..1d77e51907f 100644 --- a/include/asm-arm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/flat.h -- uClinux flat-format executables + * arch/arm/include/asm/flat.h -- uClinux flat-format executables */ #ifndef __ARM_FLAT_H__ diff --git a/include/asm-arm/floppy.h b/arch/arm/include/asm/floppy.h similarity index 99% rename from include/asm-arm/floppy.h rename to arch/arm/include/asm/floppy.h index 41a5e9d6bb6..dce20c25ab1 100644 --- a/include/asm-arm/floppy.h +++ b/arch/arm/include/asm/floppy.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/floppy.h + * arch/arm/include/asm/floppy.h * * Copyright (C) 1996-2000 Russell King * diff --git a/include/asm-arm/fpstate.h b/arch/arm/include/asm/fpstate.h similarity index 97% rename from include/asm-arm/fpstate.h rename to arch/arm/include/asm/fpstate.h index 392eb533232..ee5e03efc1b 100644 --- a/include/asm-arm/fpstate.h +++ b/arch/arm/include/asm/fpstate.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/fpstate.h + * arch/arm/include/asm/fpstate.h * * Copyright (C) 1995 Russell King * diff --git a/include/asm-arm/ftrace.h b/arch/arm/include/asm/ftrace.h similarity index 100% rename from include/asm-arm/ftrace.h rename to arch/arm/include/asm/ftrace.h diff --git a/include/asm-arm/futex.h b/arch/arm/include/asm/futex.h similarity index 100% rename from include/asm-arm/futex.h rename to arch/arm/include/asm/futex.h diff --git a/include/asm-arm/glue.h b/arch/arm/include/asm/glue.h similarity index 99% rename from include/asm-arm/glue.h rename to arch/arm/include/asm/glue.h index a97a182ba28..a0e39d5d00c 100644 --- a/include/asm-arm/glue.h +++ b/arch/arm/include/asm/glue.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/glue.h + * arch/arm/include/asm/glue.h * * Copyright (C) 1997-1999 Russell King * Copyright (C) 2000-2002 Deep Blue Solutions Ltd. diff --git a/include/asm-arm/gpio.h b/arch/arm/include/asm/gpio.h similarity index 100% rename from include/asm-arm/gpio.h rename to arch/arm/include/asm/gpio.h diff --git a/include/asm-arm/hardirq.h b/arch/arm/include/asm/hardirq.h similarity index 100% rename from include/asm-arm/hardirq.h rename to arch/arm/include/asm/hardirq.h diff --git a/include/asm-arm/hardware.h b/arch/arm/include/asm/hardware.h similarity index 90% rename from include/asm-arm/hardware.h rename to arch/arm/include/asm/hardware.h index 1fd1a5b6504..eb3b3abb7db 100644 --- a/include/asm-arm/hardware.h +++ b/arch/arm/include/asm/hardware.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware.h + * arch/arm/include/asm/hardware.h * * Copyright (C) 1996 Russell King * diff --git a/include/asm-arm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h similarity index 100% rename from include/asm-arm/hardware/arm_timer.h rename to arch/arm/include/asm/hardware/arm_timer.h diff --git a/include/asm-arm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h similarity index 100% rename from include/asm-arm/hardware/arm_twd.h rename to arch/arm/include/asm/hardware/arm_twd.h diff --git a/include/asm-arm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h similarity index 97% rename from include/asm-arm/hardware/cache-l2x0.h rename to arch/arm/include/asm/hardware/cache-l2x0.h index 54029a74039..64f2252a25c 100644 --- a/include/asm-arm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/hardware/cache-l2x0.h + * arch/arm/include/asm/hardware/cache-l2x0.h * * Copyright (C) 2007 ARM Limited * diff --git a/include/asm-arm/hardware/clps7111.h b/arch/arm/include/asm/hardware/clps7111.h similarity index 99% rename from include/asm-arm/hardware/clps7111.h rename to arch/arm/include/asm/hardware/clps7111.h index 8d3228dc177..44477225aed 100644 --- a/include/asm-arm/hardware/clps7111.h +++ b/arch/arm/include/asm/hardware/clps7111.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/clps7111.h + * arch/arm/include/asm/hardware/clps7111.h * * This file contains the hardware definitions of the CLPS7111 internal * registers. diff --git a/include/asm-arm/hardware/cs89712.h b/arch/arm/include/asm/hardware/cs89712.h similarity index 97% rename from include/asm-arm/hardware/cs89712.h rename to arch/arm/include/asm/hardware/cs89712.h index ad99a3e1b80..f75626933e9 100644 --- a/include/asm-arm/hardware/cs89712.h +++ b/arch/arm/include/asm/hardware/cs89712.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/cs89712.h + * arch/arm/include/asm/hardware/cs89712.h * * This file contains the hardware definitions of the CS89712 * additional internal registers. diff --git a/include/asm-arm/hardware/debug-8250.S b/arch/arm/include/asm/hardware/debug-8250.S similarity index 93% rename from include/asm-arm/hardware/debug-8250.S rename to arch/arm/include/asm/hardware/debug-8250.S index 07c97fb233f..22c689255e6 100644 --- a/include/asm-arm/hardware/debug-8250.S +++ b/arch/arm/include/asm/hardware/debug-8250.S @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/debug-8250.S + * arch/arm/include/asm/hardware/debug-8250.S * * Copyright (C) 1994-1999 Russell King * diff --git a/include/asm-arm/hardware/debug-pl01x.S b/arch/arm/include/asm/hardware/debug-pl01x.S similarity index 93% rename from include/asm-arm/hardware/debug-pl01x.S rename to arch/arm/include/asm/hardware/debug-pl01x.S index 23c541a9e89..f9fd083eff6 100644 --- a/include/asm-arm/hardware/debug-pl01x.S +++ b/arch/arm/include/asm/hardware/debug-pl01x.S @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/hardware/debug-pl01x.S +/* arch/arm/include/asm/hardware/debug-pl01x.S * * Debugging macro include header * diff --git a/include/asm-arm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h similarity index 99% rename from include/asm-arm/hardware/dec21285.h rename to arch/arm/include/asm/hardware/dec21285.h index 546f7077be9..7068a1c1e4e 100644 --- a/include/asm-arm/hardware/dec21285.h +++ b/arch/arm/include/asm/hardware/dec21285.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/dec21285.h + * arch/arm/include/asm/hardware/dec21285.h * * Copyright (C) 1998 Russell King * diff --git a/include/asm-arm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S similarity index 99% rename from include/asm-arm/hardware/entry-macro-iomd.S rename to arch/arm/include/asm/hardware/entry-macro-iomd.S index 9bb580a5b15..e0af4983723 100644 --- a/include/asm-arm/hardware/entry-macro-iomd.S +++ b/arch/arm/include/asm/hardware/entry-macro-iomd.S @@ -1,5 +1,5 @@ /* - * include/asm-arm/hardware/entry-macro-iomd.S + * arch/arm/include/asm/hardware/entry-macro-iomd.S * * Low-level IRQ helper macros for IOC/IOMD based platforms * diff --git a/include/asm-arm/hardware/ep7211.h b/arch/arm/include/asm/hardware/ep7211.h similarity index 96% rename from include/asm-arm/hardware/ep7211.h rename to arch/arm/include/asm/hardware/ep7211.h index 017aa68f612..654d5f625c4 100644 --- a/include/asm-arm/hardware/ep7211.h +++ b/arch/arm/include/asm/hardware/ep7211.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/ep7211.h + * arch/arm/include/asm/hardware/ep7211.h * * This file contains the hardware definitions of the EP7211 internal * registers. diff --git a/include/asm-arm/hardware/ep7212.h b/arch/arm/include/asm/hardware/ep7212.h similarity index 98% rename from include/asm-arm/hardware/ep7212.h rename to arch/arm/include/asm/hardware/ep7212.h index 0e952e74707..3b43bbeaf1d 100644 --- a/include/asm-arm/hardware/ep7212.h +++ b/arch/arm/include/asm/hardware/ep7212.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/ep7212.h + * arch/arm/include/asm/hardware/ep7212.h * * This file contains the hardware definitions of the EP7212 internal * registers. diff --git a/include/asm-arm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h similarity index 96% rename from include/asm-arm/hardware/gic.h rename to arch/arm/include/asm/hardware/gic.h index 966e428ad32..4924914af18 100644 --- a/include/asm-arm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/gic.h + * arch/arm/include/asm/hardware/gic.h * * Copyright (C) 2002 ARM Limited, All Rights Reserved. * diff --git a/include/asm-arm/hardware/icst307.h b/arch/arm/include/asm/hardware/icst307.h similarity index 96% rename from include/asm-arm/hardware/icst307.h rename to arch/arm/include/asm/hardware/icst307.h index ff8618a441c..554f128a104 100644 --- a/include/asm-arm/hardware/icst307.h +++ b/arch/arm/include/asm/hardware/icst307.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/icst307.h + * arch/arm/include/asm/hardware/icst307.h * * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. * diff --git a/include/asm-arm/hardware/icst525.h b/arch/arm/include/asm/hardware/icst525.h similarity index 96% rename from include/asm-arm/hardware/icst525.h rename to arch/arm/include/asm/hardware/icst525.h index edd5a570440..58f0dc43e2e 100644 --- a/include/asm-arm/hardware/icst525.h +++ b/arch/arm/include/asm/hardware/icst525.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/icst525.h + * arch/arm/include/asm/hardware/icst525.h * * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. * diff --git a/include/asm-arm/hardware/ioc.h b/arch/arm/include/asm/hardware/ioc.h similarity index 97% rename from include/asm-arm/hardware/ioc.h rename to arch/arm/include/asm/hardware/ioc.h index b3b46ef6594..1f6b8013bec 100644 --- a/include/asm-arm/hardware/ioc.h +++ b/arch/arm/include/asm/hardware/ioc.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/ioc.h + * arch/arm/include/asm/hardware/ioc.h * * Copyright (C) Russell King * diff --git a/include/asm-arm/hardware/iomd.h b/arch/arm/include/asm/hardware/iomd.h similarity index 99% rename from include/asm-arm/hardware/iomd.h rename to arch/arm/include/asm/hardware/iomd.h index 396e55ad06c..9c5afbd71a6 100644 --- a/include/asm-arm/hardware/iomd.h +++ b/arch/arm/include/asm/hardware/iomd.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/iomd.h + * arch/arm/include/asm/hardware/iomd.h * * Copyright (C) 1999 Russell King * diff --git a/include/asm-arm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h similarity index 100% rename from include/asm-arm/hardware/iop3xx-adma.h rename to arch/arm/include/asm/hardware/iop3xx-adma.h diff --git a/include/asm-arm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h similarity index 97% rename from include/asm-arm/hardware/iop3xx-gpio.h rename to arch/arm/include/asm/hardware/iop3xx-gpio.h index 0c9331f9ac2..222e74b7c46 100644 --- a/include/asm-arm/hardware/iop3xx-gpio.h +++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/iop3xx-gpio.h + * arch/arm/include/asm/hardware/iop3xx-gpio.h * * IOP3xx GPIO wrappers * diff --git a/include/asm-arm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h similarity index 99% rename from include/asm-arm/hardware/iop3xx.h rename to arch/arm/include/asm/hardware/iop3xx.h index 18f6937f501..4b8e7f55992 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/hardware/iop3xx.h + * arch/arm/include/asm/hardware/iop3xx.h * * Intel IOP32X and IOP33X register definitions * diff --git a/include/asm-arm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h similarity index 100% rename from include/asm-arm/hardware/iop_adma.h rename to arch/arm/include/asm/hardware/iop_adma.h diff --git a/include/asm-arm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h similarity index 100% rename from include/asm-arm/hardware/it8152.h rename to arch/arm/include/asm/hardware/it8152.h diff --git a/include/asm-arm/hardware/linkup-l1110.h b/arch/arm/include/asm/hardware/linkup-l1110.h similarity index 100% rename from include/asm-arm/hardware/linkup-l1110.h rename to arch/arm/include/asm/hardware/linkup-l1110.h diff --git a/include/asm-arm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h similarity index 99% rename from include/asm-arm/hardware/locomo.h rename to arch/arm/include/asm/hardware/locomo.h index fb0645de6f3..954b1be991b 100644 --- a/include/asm-arm/hardware/locomo.h +++ b/arch/arm/include/asm/hardware/locomo.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/locomo.h + * arch/arm/include/asm/hardware/locomo.h * * This file contains the definitions for the LoCoMo G/A Chip * diff --git a/include/asm-arm/hardware/memc.h b/arch/arm/include/asm/hardware/memc.h similarity index 93% rename from include/asm-arm/hardware/memc.h rename to arch/arm/include/asm/hardware/memc.h index 8aef5aa0e01..42ba7c167d1 100644 --- a/include/asm-arm/hardware/memc.h +++ b/arch/arm/include/asm/hardware/memc.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/memc.h + * arch/arm/include/asm/hardware/memc.h * * Copyright (C) Russell King. * diff --git a/include/asm-arm/hardware/pci_v3.h b/arch/arm/include/asm/hardware/pci_v3.h similarity index 99% rename from include/asm-arm/hardware/pci_v3.h rename to arch/arm/include/asm/hardware/pci_v3.h index 4d497bdb9a9..2811c7e2cfd 100644 --- a/include/asm-arm/hardware/pci_v3.h +++ b/arch/arm/include/asm/hardware/pci_v3.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/pci_v3.h + * arch/arm/include/asm/hardware/pci_v3.h * * Internal header file PCI V3 chip * diff --git a/include/asm-arm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h similarity index 99% rename from include/asm-arm/hardware/sa1111.h rename to arch/arm/include/asm/hardware/sa1111.h index 61b1d05c7df..6cf98d4f7dc 100644 --- a/include/asm-arm/hardware/sa1111.h +++ b/arch/arm/include/asm/hardware/sa1111.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/sa1111.h + * arch/arm/include/asm/hardware/sa1111.h * * Copyright (C) 2000 John G Dorsey * diff --git a/include/asm-arm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h similarity index 100% rename from include/asm-arm/hardware/scoop.h rename to arch/arm/include/asm/hardware/scoop.h diff --git a/include/asm-arm/hardware/sharpsl_pm.h b/arch/arm/include/asm/hardware/sharpsl_pm.h similarity index 100% rename from include/asm-arm/hardware/sharpsl_pm.h rename to arch/arm/include/asm/hardware/sharpsl_pm.h diff --git a/include/asm-arm/hardware/ssp.h b/arch/arm/include/asm/hardware/ssp.h similarity index 100% rename from include/asm-arm/hardware/ssp.h rename to arch/arm/include/asm/hardware/ssp.h diff --git a/include/asm-arm/hardware/uengine.h b/arch/arm/include/asm/hardware/uengine.h similarity index 100% rename from include/asm-arm/hardware/uengine.h rename to arch/arm/include/asm/hardware/uengine.h diff --git a/include/asm-arm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h similarity index 97% rename from include/asm-arm/hardware/vic.h rename to arch/arm/include/asm/hardware/vic.h index ed9ca3736a0..263f2c362a3 100644 --- a/include/asm-arm/hardware/vic.h +++ b/arch/arm/include/asm/hardware/vic.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/hardware/vic.h + * arch/arm/include/asm/hardware/vic.h * * Copyright (c) ARM Limited 2003. All rights reserved. * diff --git a/include/asm-arm/hw_irq.h b/arch/arm/include/asm/hw_irq.h similarity index 100% rename from include/asm-arm/hw_irq.h rename to arch/arm/include/asm/hw_irq.h diff --git a/include/asm-arm/hwcap.h b/arch/arm/include/asm/hwcap.h similarity index 100% rename from include/asm-arm/hwcap.h rename to arch/arm/include/asm/hwcap.h diff --git a/include/asm-arm/ide.h b/arch/arm/include/asm/ide.h similarity index 93% rename from include/asm-arm/ide.h rename to arch/arm/include/asm/ide.h index a48019f99d0..b507ce8e501 100644 --- a/include/asm-arm/ide.h +++ b/arch/arm/include/asm/ide.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/ide.h + * arch/arm/include/asm/ide.h * * Copyright (C) 1994-1996 Linus Torvalds & authors */ diff --git a/include/asm-arm/io.h b/arch/arm/include/asm/io.h similarity index 99% rename from include/asm-arm/io.h rename to arch/arm/include/asm/io.h index eebe56e74d6..ffe07c0f46d 100644 --- a/include/asm-arm/io.h +++ b/arch/arm/include/asm/io.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/io.h + * arch/arm/include/asm/io.h * * Copyright (C) 1996-2000 Russell King * diff --git a/include/asm-arm/ioctl.h b/arch/arm/include/asm/ioctl.h similarity index 100% rename from include/asm-arm/ioctl.h rename to arch/arm/include/asm/ioctl.h diff --git a/include/asm-arm/ioctls.h b/arch/arm/include/asm/ioctls.h similarity index 100% rename from include/asm-arm/ioctls.h rename to arch/arm/include/asm/ioctls.h diff --git a/include/asm-arm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h similarity index 100% rename from include/asm-arm/ipcbuf.h rename to arch/arm/include/asm/ipcbuf.h diff --git a/include/asm-arm/irq.h b/arch/arm/include/asm/irq.h similarity index 100% rename from include/asm-arm/irq.h rename to arch/arm/include/asm/irq.h diff --git a/include/asm-arm/irq_regs.h b/arch/arm/include/asm/irq_regs.h similarity index 100% rename from include/asm-arm/irq_regs.h rename to arch/arm/include/asm/irq_regs.h diff --git a/include/asm-arm/irqflags.h b/arch/arm/include/asm/irqflags.h similarity index 100% rename from include/asm-arm/irqflags.h rename to arch/arm/include/asm/irqflags.h diff --git a/include/asm-arm/kdebug.h b/arch/arm/include/asm/kdebug.h similarity index 100% rename from include/asm-arm/kdebug.h rename to arch/arm/include/asm/kdebug.h diff --git a/include/asm-arm/kexec.h b/arch/arm/include/asm/kexec.h similarity index 100% rename from include/asm-arm/kexec.h rename to arch/arm/include/asm/kexec.h diff --git a/include/asm-arm/kgdb.h b/arch/arm/include/asm/kgdb.h similarity index 100% rename from include/asm-arm/kgdb.h rename to arch/arm/include/asm/kgdb.h diff --git a/include/asm-arm/kmap_types.h b/arch/arm/include/asm/kmap_types.h similarity index 100% rename from include/asm-arm/kmap_types.h rename to arch/arm/include/asm/kmap_types.h diff --git a/include/asm-arm/kprobes.h b/arch/arm/include/asm/kprobes.h similarity index 98% rename from include/asm-arm/kprobes.h rename to arch/arm/include/asm/kprobes.h index b1a37876942..a5d0d99ad38 100644 --- a/include/asm-arm/kprobes.h +++ b/arch/arm/include/asm/kprobes.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/kprobes.h + * arch/arm/include/asm/kprobes.h * * Copyright (C) 2006, 2007 Motorola Inc. * diff --git a/include/asm-arm/leds.h b/arch/arm/include/asm/leds.h similarity index 96% rename from include/asm-arm/leds.h rename to arch/arm/include/asm/leds.h index 12290ea5580..c545739f39b 100644 --- a/include/asm-arm/leds.h +++ b/arch/arm/include/asm/leds.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/leds.h + * arch/arm/include/asm/leds.h * * Copyright (C) 1998 Russell King * diff --git a/include/asm-arm/limits.h b/arch/arm/include/asm/limits.h similarity index 100% rename from include/asm-arm/limits.h rename to arch/arm/include/asm/limits.h diff --git a/include/asm-arm/linkage.h b/arch/arm/include/asm/linkage.h similarity index 100% rename from include/asm-arm/linkage.h rename to arch/arm/include/asm/linkage.h diff --git a/include/asm-arm/local.h b/arch/arm/include/asm/local.h similarity index 100% rename from include/asm-arm/local.h rename to arch/arm/include/asm/local.h diff --git a/include/asm-arm/locks.h b/arch/arm/include/asm/locks.h similarity index 99% rename from include/asm-arm/locks.h rename to arch/arm/include/asm/locks.h index 852220eecdb..ef4c897772d 100644 --- a/include/asm-arm/locks.h +++ b/arch/arm/include/asm/locks.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/locks.h + * arch/arm/include/asm/locks.h * * Copyright (C) 2000 Russell King * diff --git a/include/asm-arm/mach/arch.h b/arch/arm/include/asm/mach/arch.h similarity index 97% rename from include/asm-arm/mach/arch.h rename to arch/arm/include/asm/mach/arch.h index bcc8aed7c9a..c59842dc7cb 100644 --- a/include/asm-arm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/arch.h + * arch/arm/include/asm/mach/arch.h * * Copyright (C) 2000 Russell King * diff --git a/include/asm-arm/mach/dma.h b/arch/arm/include/asm/mach/dma.h similarity index 97% rename from include/asm-arm/mach/dma.h rename to arch/arm/include/asm/mach/dma.h index e7c4a20aad5..fc7278ea714 100644 --- a/include/asm-arm/mach/dma.h +++ b/arch/arm/include/asm/mach/dma.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/dma.h + * arch/arm/include/asm/mach/dma.h * * Copyright (C) 1998-2000 Russell King * diff --git a/include/asm-arm/mach/flash.h b/arch/arm/include/asm/mach/flash.h similarity index 96% rename from include/asm-arm/mach/flash.h rename to arch/arm/include/asm/mach/flash.h index 05b029ef637..4ca69fe2c85 100644 --- a/include/asm-arm/mach/flash.h +++ b/arch/arm/include/asm/mach/flash.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/flash.h + * arch/arm/include/asm/mach/flash.h * * Copyright (C) 2003 Russell King, All Rights Reserved. * diff --git a/include/asm-arm/mach/irda.h b/arch/arm/include/asm/mach/irda.h similarity index 93% rename from include/asm-arm/mach/irda.h rename to arch/arm/include/asm/mach/irda.h index 58984d9c0b0..38f77b5e56c 100644 --- a/include/asm-arm/mach/irda.h +++ b/arch/arm/include/asm/mach/irda.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/irda.h + * arch/arm/include/asm/mach/irda.h * * Copyright (C) 2004 Russell King. * diff --git a/include/asm-arm/mach/irq.h b/arch/arm/include/asm/mach/irq.h similarity index 96% rename from include/asm-arm/mach/irq.h rename to arch/arm/include/asm/mach/irq.h index eb0bfba6570..c57b52ce574 100644 --- a/include/asm-arm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/irq.h + * arch/arm/include/asm/mach/irq.h * * Copyright (C) 1995-2000 Russell King. * diff --git a/include/asm-arm/mach/map.h b/arch/arm/include/asm/mach/map.h similarity index 96% rename from include/asm-arm/mach/map.h rename to arch/arm/include/asm/mach/map.h index 7ef3c839018..06f583b1399 100644 --- a/include/asm-arm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/map.h + * arch/arm/include/asm/map.h * * Copyright (C) 1999-2000 Russell King * diff --git a/include/asm-arm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h similarity index 88% rename from include/asm-arm/mach/mmc.h rename to arch/arm/include/asm/mach/mmc.h index eb91145c00c..4da332b0314 100644 --- a/include/asm-arm/mach/mmc.h +++ b/arch/arm/include/asm/mach/mmc.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/mmc.h + * arch/arm/include/asm/mach/mmc.h */ #ifndef ASMARM_MACH_MMC_H #define ASMARM_MACH_MMC_H diff --git a/include/asm-arm/mach/pci.h b/arch/arm/include/asm/mach/pci.h similarity index 98% rename from include/asm-arm/mach/pci.h rename to arch/arm/include/asm/mach/pci.h index 9d4f6b5ea41..32da1ae17e0 100644 --- a/include/asm-arm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/pci.h + * arch/arm/include/asm/mach/pci.h * * Copyright (C) 2000 Russell King * diff --git a/include/asm-arm/mach/serial_at91.h b/arch/arm/include/asm/mach/serial_at91.h similarity index 94% rename from include/asm-arm/mach/serial_at91.h rename to arch/arm/include/asm/mach/serial_at91.h index 55b317a8906..ea6d063923b 100644 --- a/include/asm-arm/mach/serial_at91.h +++ b/arch/arm/include/asm/mach/serial_at91.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/serial_at91.h + * arch/arm/include/asm/mach/serial_at91.h * * Based on serial_sa1100.h by Nicolas Pitre * diff --git a/include/asm-arm/mach/serial_sa1100.h b/arch/arm/include/asm/mach/serial_sa1100.h similarity index 86% rename from include/asm-arm/mach/serial_sa1100.h rename to arch/arm/include/asm/mach/serial_sa1100.h index 20c22bb218d..d09064bf95a 100644 --- a/include/asm-arm/mach/serial_sa1100.h +++ b/arch/arm/include/asm/mach/serial_sa1100.h @@ -1,9 +1,9 @@ /* - * linux/include/asm-arm/mach/serial_sa1100.h + * arch/arm/include/asm/mach/serial_sa1100.h * * Author: Nicolas Pitre * - * Moved to include/asm-arm/mach and changed lots, Russell King + * Moved and changed lots, Russell King * * Low level machine dependent UART functions. */ diff --git a/include/asm-arm/mach/sharpsl_param.h b/arch/arm/include/asm/mach/sharpsl_param.h similarity index 100% rename from include/asm-arm/mach/sharpsl_param.h rename to arch/arm/include/asm/mach/sharpsl_param.h diff --git a/include/asm-arm/mach/time.h b/arch/arm/include/asm/mach/time.h similarity index 97% rename from include/asm-arm/mach/time.h rename to arch/arm/include/asm/mach/time.h index 2fd36ea0130..b2cc1fcd040 100644 --- a/include/asm-arm/mach/time.h +++ b/arch/arm/include/asm/mach/time.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/time.h + * arch/arm/include/asm/mach/time.h * * Copyright (C) 2004 MontaVista Software, Inc. * diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h similarity index 95% rename from include/asm-arm/mach/udc_pxa2xx.h rename to arch/arm/include/asm/mach/udc_pxa2xx.h index 9e5ed7c0f27..270902c353f 100644 --- a/include/asm-arm/mach/udc_pxa2xx.h +++ b/arch/arm/include/asm/mach/udc_pxa2xx.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mach/udc_pxa2xx.h + * arch/arm/include/asm/mach/udc_pxa2xx.h * * This supports machine-specific differences in how the PXA2xx * USB Device Controller (UDC) is wired. diff --git a/include/asm-arm/mc146818rtc.h b/arch/arm/include/asm/mc146818rtc.h similarity index 100% rename from include/asm-arm/mc146818rtc.h rename to arch/arm/include/asm/mc146818rtc.h diff --git a/include/asm-arm/memory.h b/arch/arm/include/asm/memory.h similarity index 99% rename from include/asm-arm/memory.h rename to arch/arm/include/asm/memory.h index 9ba4d7136e6..92069221dca 100644 --- a/include/asm-arm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/memory.h + * arch/arm/include/asm/memory.h * * Copyright (C) 2000-2002 Russell King * modification for nommu, Hyok S. Choi, 2004 diff --git a/include/asm-arm/mman.h b/arch/arm/include/asm/mman.h similarity index 100% rename from include/asm-arm/mman.h rename to arch/arm/include/asm/mman.h diff --git a/include/asm-arm/mmu.h b/arch/arm/include/asm/mmu.h similarity index 100% rename from include/asm-arm/mmu.h rename to arch/arm/include/asm/mmu.h diff --git a/include/asm-arm/mmu_context.h b/arch/arm/include/asm/mmu_context.h similarity index 98% rename from include/asm-arm/mmu_context.h rename to arch/arm/include/asm/mmu_context.h index 91b9dfdfed5..a301e446007 100644 --- a/include/asm-arm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mmu_context.h + * arch/arm/include/asm/mmu_context.h * * Copyright (C) 1996 Russell King. * diff --git a/include/asm-arm/mmzone.h b/arch/arm/include/asm/mmzone.h similarity index 94% rename from include/asm-arm/mmzone.h rename to arch/arm/include/asm/mmzone.h index b87de151f0a..f2fbb508490 100644 --- a/include/asm-arm/mmzone.h +++ b/arch/arm/include/asm/mmzone.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/mmzone.h + * arch/arm/include/asm/mmzone.h * * 1999-12-29 Nicolas Pitre Created * diff --git a/include/asm-arm/module.h b/arch/arm/include/asm/module.h similarity index 100% rename from include/asm-arm/module.h rename to arch/arm/include/asm/module.h diff --git a/include/asm-arm/msgbuf.h b/arch/arm/include/asm/msgbuf.h similarity index 100% rename from include/asm-arm/msgbuf.h rename to arch/arm/include/asm/msgbuf.h diff --git a/include/asm-arm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h similarity index 100% rename from include/asm-arm/mtd-xip.h rename to arch/arm/include/asm/mtd-xip.h diff --git a/include/asm-arm/mutex.h b/arch/arm/include/asm/mutex.h similarity index 98% rename from include/asm-arm/mutex.h rename to arch/arm/include/asm/mutex.h index 020bd98710a..93226cf23ae 100644 --- a/include/asm-arm/mutex.h +++ b/arch/arm/include/asm/mutex.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/mutex.h + * arch/arm/include/asm/mutex.h * * ARM optimized mutex locking primitives * diff --git a/include/asm-arm/nwflash.h b/arch/arm/include/asm/nwflash.h similarity index 100% rename from include/asm-arm/nwflash.h rename to arch/arm/include/asm/nwflash.h diff --git a/include/asm-arm/page-nommu.h b/arch/arm/include/asm/page-nommu.h similarity index 96% rename from include/asm-arm/page-nommu.h rename to arch/arm/include/asm/page-nommu.h index ea1cde84f50..3574c0deb37 100644 --- a/include/asm-arm/page-nommu.h +++ b/arch/arm/include/asm/page-nommu.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/page-nommu.h + * arch/arm/include/asm/page-nommu.h * * Copyright (C) 2004 Hyok S. Choi * diff --git a/include/asm-arm/page.h b/arch/arm/include/asm/page.h similarity index 99% rename from include/asm-arm/page.h rename to arch/arm/include/asm/page.h index 7c5fc5582e5..cf2e2680daa 100644 --- a/include/asm-arm/page.h +++ b/arch/arm/include/asm/page.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/page.h + * arch/arm/include/asm/page.h * * Copyright (C) 1995-2003 Russell King * diff --git a/include/asm-arm/param.h b/arch/arm/include/asm/param.h similarity index 95% rename from include/asm-arm/param.h rename to arch/arm/include/asm/param.h index 15806468ba7..8b24bf94c06 100644 --- a/include/asm-arm/param.h +++ b/arch/arm/include/asm/param.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/param.h + * arch/arm/include/asm/param.h * * Copyright (C) 1995-1999 Russell King * diff --git a/include/asm-arm/parport.h b/arch/arm/include/asm/parport.h similarity index 86% rename from include/asm-arm/parport.h rename to arch/arm/include/asm/parport.h index f2f90c76ddd..26e94b09035 100644 --- a/include/asm-arm/parport.h +++ b/arch/arm/include/asm/parport.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/parport.h: ARM-specific parport initialisation + * arch/arm/include/asm/parport.h: ARM-specific parport initialisation * * Copyright (C) 1999, 2000 Tim Waugh * diff --git a/include/asm-arm/pci.h b/arch/arm/include/asm/pci.h similarity index 100% rename from include/asm-arm/pci.h rename to arch/arm/include/asm/pci.h diff --git a/include/asm-arm/percpu.h b/arch/arm/include/asm/percpu.h similarity index 100% rename from include/asm-arm/percpu.h rename to arch/arm/include/asm/percpu.h diff --git a/include/asm-arm/pgalloc.h b/arch/arm/include/asm/pgalloc.h similarity index 98% rename from include/asm-arm/pgalloc.h rename to arch/arm/include/asm/pgalloc.h index 163b0305dd7..3dcd64bf182 100644 --- a/include/asm-arm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/pgalloc.h + * arch/arm/include/asm/pgalloc.h * * Copyright (C) 2000-2001 Russell King * diff --git a/include/asm-arm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h similarity index 98% rename from include/asm-arm/pgtable-hwdef.h rename to arch/arm/include/asm/pgtable-hwdef.h index f3b5120c99f..fd1521d5cb9 100644 --- a/include/asm-arm/pgtable-hwdef.h +++ b/arch/arm/include/asm/pgtable-hwdef.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/pgtable-hwdef.h + * arch/arm/include/asm/pgtable-hwdef.h * * Copyright (C) 1995-2002 Russell King * diff --git a/include/asm-arm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h similarity index 98% rename from include/asm-arm/pgtable-nommu.h rename to arch/arm/include/asm/pgtable-nommu.h index 386fcc10a97..b011f2e939a 100644 --- a/include/asm-arm/pgtable-nommu.h +++ b/arch/arm/include/asm/pgtable-nommu.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/pgtable-nommu.h + * arch/arm/include/asm/pgtable-nommu.h * * Copyright (C) 1995-2002 Russell King * Copyright (C) 2004 Hyok S. Choi diff --git a/include/asm-arm/pgtable.h b/arch/arm/include/asm/pgtable.h similarity index 99% rename from include/asm-arm/pgtable.h rename to arch/arm/include/asm/pgtable.h index 5571c13c3f3..8ab060a53ab 100644 --- a/include/asm-arm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/pgtable.h + * arch/arm/include/asm/pgtable.h * * Copyright (C) 1995-2002 Russell King * diff --git a/include/asm-arm/poll.h b/arch/arm/include/asm/poll.h similarity index 100% rename from include/asm-arm/poll.h rename to arch/arm/include/asm/poll.h diff --git a/include/asm-arm/posix_types.h b/arch/arm/include/asm/posix_types.h similarity index 98% rename from include/asm-arm/posix_types.h rename to arch/arm/include/asm/posix_types.h index c37379dadcb..2446d23bfdb 100644 --- a/include/asm-arm/posix_types.h +++ b/arch/arm/include/asm/posix_types.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/posix_types.h + * arch/arm/include/asm/posix_types.h * * Copyright (C) 1996-1998 Russell King. * diff --git a/include/asm-arm/proc-fns.h b/arch/arm/include/asm/proc-fns.h similarity index 99% rename from include/asm-arm/proc-fns.h rename to arch/arm/include/asm/proc-fns.h index 75ec760f4c7..db80203b68e 100644 --- a/include/asm-arm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/proc-fns.h + * arch/arm/include/asm/proc-fns.h * * Copyright (C) 1997-1999 Russell King * Copyright (C) 2000 Deep Blue Solutions Ltd diff --git a/include/asm-arm/processor.h b/arch/arm/include/asm/processor.h similarity index 98% rename from include/asm-arm/processor.h rename to arch/arm/include/asm/processor.h index bd8029e8dc6..b01d5e7e3d5 100644 --- a/include/asm-arm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/processor.h + * arch/arm/include/asm/processor.h * * Copyright (C) 1995-1999 Russell King * diff --git a/include/asm-arm/procinfo.h b/arch/arm/include/asm/procinfo.h similarity index 97% rename from include/asm-arm/procinfo.h rename to arch/arm/include/asm/procinfo.h index 4d3c685075e..ca52e584ef7 100644 --- a/include/asm-arm/procinfo.h +++ b/arch/arm/include/asm/procinfo.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/procinfo.h + * arch/arm/include/asm/procinfo.h * * Copyright (C) 1996-1999 Russell King * diff --git a/include/asm-arm/ptrace.h b/arch/arm/include/asm/ptrace.h similarity index 99% rename from include/asm-arm/ptrace.h rename to arch/arm/include/asm/ptrace.h index 8382b7510f9..b415c0e8545 100644 --- a/include/asm-arm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/ptrace.h + * arch/arm/include/asm/ptrace.h * * Copyright (C) 1996-2003 Russell King * diff --git a/include/asm-arm/resource.h b/arch/arm/include/asm/resource.h similarity index 100% rename from include/asm-arm/resource.h rename to arch/arm/include/asm/resource.h diff --git a/include/asm-arm/scatterlist.h b/arch/arm/include/asm/scatterlist.h similarity index 100% rename from include/asm-arm/scatterlist.h rename to arch/arm/include/asm/scatterlist.h diff --git a/include/asm-arm/sections.h b/arch/arm/include/asm/sections.h similarity index 100% rename from include/asm-arm/sections.h rename to arch/arm/include/asm/sections.h diff --git a/include/asm-arm/segment.h b/arch/arm/include/asm/segment.h similarity index 100% rename from include/asm-arm/segment.h rename to arch/arm/include/asm/segment.h diff --git a/include/asm-arm/sembuf.h b/arch/arm/include/asm/sembuf.h similarity index 100% rename from include/asm-arm/sembuf.h rename to arch/arm/include/asm/sembuf.h diff --git a/include/asm-arm/serial.h b/arch/arm/include/asm/serial.h similarity index 91% rename from include/asm-arm/serial.h rename to arch/arm/include/asm/serial.h index 015b262dc14..ebb049091e2 100644 --- a/include/asm-arm/serial.h +++ b/arch/arm/include/asm/serial.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/serial.h + * arch/arm/include/asm/serial.h * * Copyright (C) 1996 Russell King. * diff --git a/include/asm-arm/setup.h b/arch/arm/include/asm/setup.h similarity index 100% rename from include/asm-arm/setup.h rename to arch/arm/include/asm/setup.h diff --git a/include/asm-arm/shmbuf.h b/arch/arm/include/asm/shmbuf.h similarity index 100% rename from include/asm-arm/shmbuf.h rename to arch/arm/include/asm/shmbuf.h diff --git a/include/asm-arm/shmparam.h b/arch/arm/include/asm/shmparam.h similarity index 100% rename from include/asm-arm/shmparam.h rename to arch/arm/include/asm/shmparam.h diff --git a/include/asm-arm/sigcontext.h b/arch/arm/include/asm/sigcontext.h similarity index 100% rename from include/asm-arm/sigcontext.h rename to arch/arm/include/asm/sigcontext.h diff --git a/include/asm-arm/siginfo.h b/arch/arm/include/asm/siginfo.h similarity index 100% rename from include/asm-arm/siginfo.h rename to arch/arm/include/asm/siginfo.h diff --git a/include/asm-arm/signal.h b/arch/arm/include/asm/signal.h similarity index 100% rename from include/asm-arm/signal.h rename to arch/arm/include/asm/signal.h diff --git a/include/asm-arm/sizes.h b/arch/arm/include/asm/sizes.h similarity index 100% rename from include/asm-arm/sizes.h rename to arch/arm/include/asm/sizes.h diff --git a/include/asm-arm/smp.h b/arch/arm/include/asm/smp.h similarity index 97% rename from include/asm-arm/smp.h rename to arch/arm/include/asm/smp.h index 7fffa2404b8..cc12a525a06 100644 --- a/include/asm-arm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/smp.h + * arch/arm/include/asm/smp.h * * Copyright (C) 2004-2005 ARM Ltd. * @@ -17,7 +17,7 @@ #include #ifndef CONFIG_SMP -# error " included in non-SMP build" +# error " included in non-SMP build" #endif #define raw_smp_processor_id() (current_thread_info()->cpu) diff --git a/include/asm-arm/socket.h b/arch/arm/include/asm/socket.h similarity index 100% rename from include/asm-arm/socket.h rename to arch/arm/include/asm/socket.h diff --git a/include/asm-arm/sockios.h b/arch/arm/include/asm/sockios.h similarity index 100% rename from include/asm-arm/sockios.h rename to arch/arm/include/asm/sockios.h diff --git a/include/asm-arm/sparsemem.h b/arch/arm/include/asm/sparsemem.h similarity index 100% rename from include/asm-arm/sparsemem.h rename to arch/arm/include/asm/sparsemem.h diff --git a/include/asm-arm/spinlock.h b/arch/arm/include/asm/spinlock.h similarity index 100% rename from include/asm-arm/spinlock.h rename to arch/arm/include/asm/spinlock.h diff --git a/include/asm-arm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h similarity index 100% rename from include/asm-arm/spinlock_types.h rename to arch/arm/include/asm/spinlock_types.h diff --git a/include/asm-arm/stat.h b/arch/arm/include/asm/stat.h similarity index 100% rename from include/asm-arm/stat.h rename to arch/arm/include/asm/stat.h diff --git a/include/asm-arm/statfs.h b/arch/arm/include/asm/statfs.h similarity index 100% rename from include/asm-arm/statfs.h rename to arch/arm/include/asm/statfs.h diff --git a/include/asm-arm/string.h b/arch/arm/include/asm/string.h similarity index 100% rename from include/asm-arm/string.h rename to arch/arm/include/asm/string.h diff --git a/include/asm-arm/suspend.h b/arch/arm/include/asm/suspend.h similarity index 100% rename from include/asm-arm/suspend.h rename to arch/arm/include/asm/suspend.h diff --git a/include/asm-arm/system.h b/arch/arm/include/asm/system.h similarity index 100% rename from include/asm-arm/system.h rename to arch/arm/include/asm/system.h diff --git a/include/asm-arm/termbits.h b/arch/arm/include/asm/termbits.h similarity index 100% rename from include/asm-arm/termbits.h rename to arch/arm/include/asm/termbits.h diff --git a/include/asm-arm/termios.h b/arch/arm/include/asm/termios.h similarity index 100% rename from include/asm-arm/termios.h rename to arch/arm/include/asm/termios.h diff --git a/include/asm-arm/therm.h b/arch/arm/include/asm/therm.h similarity index 88% rename from include/asm-arm/therm.h rename to arch/arm/include/asm/therm.h index e51c923ecdf..f002f0197d7 100644 --- a/include/asm-arm/therm.h +++ b/arch/arm/include/asm/therm.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/therm.h: Definitions for Dallas Semiconductor + * arch/arm/include/asm/therm.h: Definitions for Dallas Semiconductor * DS1620 thermometer driver (as used in the Rebel.com NetWinder) */ #ifndef __ASM_THERM_H diff --git a/include/asm-arm/thread_info.h b/arch/arm/include/asm/thread_info.h similarity index 97% rename from include/asm-arm/thread_info.h rename to arch/arm/include/asm/thread_info.h index d4be2d64616..e56fa48e4ae 100644 --- a/include/asm-arm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/thread_info.h + * arch/arm/include/asm/thread_info.h * * Copyright (C) 2002 Russell King. * @@ -117,7 +117,7 @@ extern void iwmmxt_task_switch(struct thread_info *); /* * We use bit 30 of the preempt_count to indicate that kernel - * preemption is occurring. See include/asm-arm/hardirq.h. + * preemption is occurring. See . */ #define PREEMPT_ACTIVE 0x40000000 diff --git a/include/asm-arm/thread_notify.h b/arch/arm/include/asm/thread_notify.h similarity index 96% rename from include/asm-arm/thread_notify.h rename to arch/arm/include/asm/thread_notify.h index 8866e521684..f27379d7f72 100644 --- a/include/asm-arm/thread_notify.h +++ b/arch/arm/include/asm/thread_notify.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/thread_notify.h + * arch/arm/include/asm/thread_notify.h * * Copyright (C) 2006 Russell King. * diff --git a/include/asm-arm/timex.h b/arch/arm/include/asm/timex.h similarity index 93% rename from include/asm-arm/timex.h rename to arch/arm/include/asm/timex.h index 7b8d4cb24be..e50e2926cd6 100644 --- a/include/asm-arm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/timex.h + * arch/arm/include/asm/timex.h * * Copyright (C) 1997,1998 Russell King * diff --git a/include/asm-arm/tlb.h b/arch/arm/include/asm/tlb.h similarity index 98% rename from include/asm-arm/tlb.h rename to arch/arm/include/asm/tlb.h index 36bd402a21c..857f1dfac79 100644 --- a/include/asm-arm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/tlb.h + * arch/arm/include/asm/tlb.h * * Copyright (C) 2002 Russell King * diff --git a/include/asm-arm/tlbflush.h b/arch/arm/include/asm/tlbflush.h similarity index 99% rename from include/asm-arm/tlbflush.h rename to arch/arm/include/asm/tlbflush.h index 909656c747e..0d0d40f1b59 100644 --- a/include/asm-arm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/tlbflush.h + * arch/arm/include/asm/tlbflush.h * * Copyright (C) 1999-2003 Russell King * diff --git a/include/asm-arm/topology.h b/arch/arm/include/asm/topology.h similarity index 100% rename from include/asm-arm/topology.h rename to arch/arm/include/asm/topology.h diff --git a/include/asm-arm/traps.h b/arch/arm/include/asm/traps.h similarity index 100% rename from include/asm-arm/traps.h rename to arch/arm/include/asm/traps.h diff --git a/include/asm-arm/types.h b/arch/arm/include/asm/types.h similarity index 100% rename from include/asm-arm/types.h rename to arch/arm/include/asm/types.h diff --git a/include/asm-arm/uaccess.h b/arch/arm/include/asm/uaccess.h similarity index 99% rename from include/asm-arm/uaccess.h rename to arch/arm/include/asm/uaccess.h index 4c1a3fa9f25..d0f51ff900b 100644 --- a/include/asm-arm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/uaccess.h + * arch/arm/include/asm/uaccess.h * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/include/asm-arm/ucontext.h b/arch/arm/include/asm/ucontext.h similarity index 100% rename from include/asm-arm/ucontext.h rename to arch/arm/include/asm/ucontext.h diff --git a/include/asm-arm/unaligned.h b/arch/arm/include/asm/unaligned.h similarity index 100% rename from include/asm-arm/unaligned.h rename to arch/arm/include/asm/unaligned.h diff --git a/include/asm-arm/unistd.h b/arch/arm/include/asm/unistd.h similarity index 99% rename from include/asm-arm/unistd.h rename to arch/arm/include/asm/unistd.h index 7c570082b1e..f95fbb2fcb5 100644 --- a/include/asm-arm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/unistd.h + * arch/arm/include/asm/unistd.h * * Copyright (C) 2001-2005 Russell King * diff --git a/include/asm-arm/user.h b/arch/arm/include/asm/user.h similarity index 100% rename from include/asm-arm/user.h rename to arch/arm/include/asm/user.h diff --git a/include/asm-arm/vfp.h b/arch/arm/include/asm/vfp.h similarity index 98% rename from include/asm-arm/vfp.h rename to arch/arm/include/asm/vfp.h index 5f9a2cb3d45..f4ab34fd4f7 100644 --- a/include/asm-arm/vfp.h +++ b/arch/arm/include/asm/vfp.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/vfp.h + * arch/arm/include/asm/vfp.h * * VFP register definitions. * First, the standard VFP set. diff --git a/include/asm-arm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h similarity index 97% rename from include/asm-arm/vfpmacros.h rename to arch/arm/include/asm/vfpmacros.h index cccb3892e73..422f3cc204a 100644 --- a/include/asm-arm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/vfpmacros.h + * arch/arm/include/asm/vfpmacros.h * * Assembler-only file containing VFP macros and register definitions. */ diff --git a/include/asm-arm/vga.h b/arch/arm/include/asm/vga.h similarity index 100% rename from include/asm-arm/vga.h rename to arch/arm/include/asm/vga.h diff --git a/include/asm-arm/xor.h b/arch/arm/include/asm/xor.h similarity index 99% rename from include/asm-arm/xor.h rename to arch/arm/include/asm/xor.h index e7c4cf58bed..7604673dc42 100644 --- a/include/asm-arm/xor.h +++ b/arch/arm/include/asm/xor.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/xor.h + * arch/arm/include/asm/xor.h * * Copyright (C) 2001 Russell King * diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 7e9c00a8a41..1c3c6ea5f9e 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -181,7 +181,7 @@ ENTRY(lookup_processor_type) ldmfd sp!, {r4 - r7, r9, pc} /* - * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for + * Look in and arch/arm/kernel/arch.[ch] for * more information about the __proc_info and __arch_info structures. */ .long __proc_info_begin diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 1dd8ea4f9a9..2034d4dbe6a 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -20,7 +20,7 @@ * r2, r3 contains the zero-extended value * lr corrupted * - * No other registers must be altered. (see include/asm-arm/uaccess.h + * No other registers must be altered. (see * for specific ASM register usage). * * Note that ADDR_LIMIT is either 0 or 0xc0000000. diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 8620afe54f7..08ec7dffa52 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -20,7 +20,7 @@ * Outputs: r0 is the error code * lr corrupted * - * No other registers must be altered. (see include/asm-arm/uaccess.h + * No other registers must be altered. (see * for specific ASM register usage). * * Note that ADDR_LIMIT is either 0 or 0xc0000000 diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 303a7ff6bfd..b81dbf9ffb7 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -259,7 +259,7 @@ remap_area_supersections(unsigned long virt, unsigned long pfn, * caller shouldn't need to know that small detail. * * 'flags' are the extra L_PTE_ flags that you want to specify for this - * mapping. See include/asm-arm/proc-armv/pgtable.h for more information. + * mapping. See for more information. */ void __iomem * __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size, diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index d64f8e6f75a..eda733d3045 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -231,7 +231,7 @@ cpu_arm720_name: .align /* - * See linux/include/asm-arm/procinfo.h for a definition of this structure. + * See for a definition of this structure. */ .section ".proc.info.init", #alloc, #execinstr diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h index 4a4d02c0911..386cbd13eaf 100644 --- a/arch/arm/nwfpe/fpa11.h +++ b/arch/arm/nwfpe/fpa11.h @@ -69,7 +69,7 @@ typedef union tagFPREG { * This structure is exported to user space. Do not re-order. * Only add new stuff to the end, and do not change the size of * any element. Elements of this structure are used by user - * space, and must match struct user_fp in include/asm-arm/user.h. + * space, and must match struct user_fp in . * We include the byte offsets below for documentation purposes. * * The size of this structure and FPREG are checked by fpmodule.c -- GitLab From bccf650270a94cec6e9238743e84c6e01de30c70 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 2 Aug 2008 22:33:18 +0100 Subject: [PATCH 0644/1024] [ARM] Fix explicit asm(-arm)?/arch-foo references No file should be explicitly referencing its own platform headers by specifying an absolute include path. Fix these paths to use standard includes. Signed-off-by: Russell King --- arch/arm/mach-ns9xxx/board-a9m9750dev.c | 12 ++++++------ arch/arm/mach-ns9xxx/gpio-ns9360.c | 4 ++-- arch/arm/mach-ns9xxx/gpio.c | 6 +++--- arch/arm/mach-ns9xxx/irq.c | 6 +++--- arch/arm/mach-ns9xxx/mach-cc9p9360dev.c | 2 +- arch/arm/mach-ns9xxx/mach-cc9p9360js.c | 2 +- arch/arm/mach-ns9xxx/plat-serial8250.c | 4 ++-- arch/arm/mach-ns9xxx/processor-ns9360.c | 4 ++-- arch/arm/mach-ns9xxx/time-ns9360.c | 6 +++--- drivers/mtd/maps/ipaq-flash.c | 2 +- include/asm-arm/arch-ns9xxx/debug-macro.S | 2 +- include/asm-arm/arch-ns9xxx/entry-macro.S | 2 +- include/asm-arm/arch-ns9xxx/processor.h | 2 +- include/asm-arm/arch-ns9xxx/system.h | 4 ++-- include/asm-arm/arch-omap/board.h | 2 +- 15 files changed, 30 insertions(+), 30 deletions(-) diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c index a494b71c019..46b4f5a2e7f 100644 --- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c +++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c @@ -13,12 +13,12 @@ #include #include -#include -#include -#include -#include -#include -#include +#include +#include +#include +#include +#include +#include #include "board-a9m9750dev.h" diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.c b/arch/arm/mach-ns9xxx/gpio-ns9360.c index cabfb879dda..7bc05a4b45b 100644 --- a/arch/arm/mach-ns9xxx/gpio-ns9360.c +++ b/arch/arm/mach-ns9xxx/gpio-ns9360.c @@ -14,8 +14,8 @@ #include #include -#include -#include +#include +#include #include "gpio-ns9360.h" diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c index b3c963b0c8f..ed4c83389d4 100644 --- a/arch/arm/mach-ns9xxx/gpio.c +++ b/arch/arm/mach-ns9xxx/gpio.c @@ -13,9 +13,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include #include #include diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c index ca85d24cf39..d2964257797 100644 --- a/arch/arm/mach-ns9xxx/irq.c +++ b/arch/arm/mach-ns9xxx/irq.c @@ -13,9 +13,9 @@ #include #include #include -#include -#include -#include +#include +#include +#include #include "generic.h" diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c index 9623fff6b3b..7714233fb00 100644 --- a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c +++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c @@ -11,7 +11,7 @@ #include #include -#include +#include #include "board-a9m9750dev.h" #include "generic.h" diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c index fcc815bdd29..bdbd0bb1a0b 100644 --- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c +++ b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c @@ -11,7 +11,7 @@ #include #include -#include +#include #include "board-jscc9p9360.h" #include "generic.h" diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c index 5aa5d9baf8c..c9cce9b4e6c 100644 --- a/arch/arm/mach-ns9xxx/plat-serial8250.c +++ b/arch/arm/mach-ns9xxx/plat-serial8250.c @@ -11,8 +11,8 @@ #include #include -#include -#include +#include +#include #define DRIVER_NAME "serial8250" diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c index 2bee0b7fccb..8ee81b59b35 100644 --- a/arch/arm/mach-ns9xxx/processor-ns9360.c +++ b/arch/arm/mach-ns9xxx/processor-ns9360.c @@ -14,8 +14,8 @@ #include #include -#include -#include +#include +#include void ns9360_reset(char mode) { diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c index 4d573c9793e..66bd5826297 100644 --- a/arch/arm/mach-ns9xxx/time-ns9360.c +++ b/arch/arm/mach-ns9xxx/time-ns9360.c @@ -15,9 +15,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include #include "generic.h" diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c index a806119797e..113b1062020 100644 --- a/drivers/mtd/maps/ipaq-flash.c +++ b/drivers/mtd/maps/ipaq-flash.c @@ -25,7 +25,7 @@ #endif #include -#include +#include #include diff --git a/include/asm-arm/arch-ns9xxx/debug-macro.S b/include/asm-arm/arch-ns9xxx/debug-macro.S index b21b93eb2db..94680950ee6 100644 --- a/include/asm-arm/arch-ns9xxx/debug-macro.S +++ b/include/asm-arm/arch-ns9xxx/debug-macro.S @@ -9,7 +9,7 @@ */ #include -#include +#include .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S index 89a21c53046..2f6c89ddf95 100644 --- a/include/asm-arm/arch-ns9xxx/entry-macro.S +++ b/include/asm-arm/arch-ns9xxx/entry-macro.S @@ -9,7 +9,7 @@ * the Free Software Foundation. */ #include -#include +#include .macro get_irqnr_preamble, base, tmp ldr \base, =SYS_ISRADDR diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h index f7b53b65de8..3137e5ba01a 100644 --- a/include/asm-arm/arch-ns9xxx/processor.h +++ b/include/asm-arm/arch-ns9xxx/processor.h @@ -11,7 +11,7 @@ #ifndef __ASM_ARCH_PROCESSOR_H #define __ASM_ARCH_PROCESSOR_H -#include +#include #define processor_is_ns9210() (0 \ || module_is_cc7ucamry() \ diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h index 1348073afe4..c2941684d66 100644 --- a/include/asm-arm/arch-ns9xxx/system.h +++ b/include/asm-arm/arch-ns9xxx/system.h @@ -12,8 +12,8 @@ #define __ASM_ARCH_SYSTEM_H #include -#include -#include +#include +#include static inline void arch_idle(void) { diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h index db44c5d1f1a..99564c70f12 100644 --- a/include/asm-arm/arch-omap/board.h +++ b/include/asm-arm/arch-omap/board.h @@ -154,7 +154,7 @@ struct omap_version_config { }; -#include +#include struct omap_board_config_entry { u16 tag; -- GitLab From 596400f0f322c78347e35c197b66faf09a9c1e02 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sat, 2 Aug 2008 19:53:44 +0300 Subject: [PATCH 0645/1024] sh/boards/Makefile typo fix The following build error was caused by an obvious typo: <-- snip --> ... LD arch/sh/mm/built-in.o make[2]: *** No rule to make target `arch/sh/boards/board-shmin..o', needed by `arch/sh/boards/built-in.o'. Stop. <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/boards/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile index ff9b93c5a91..463022c7df3 100644 --- a/arch/sh/boards/Makefile +++ b/arch/sh/boards/Makefile @@ -5,4 +5,4 @@ obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o obj-$(CONFIG_SH_RSK7203) += board-rsk7203.o obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o -obj-$(CONFIG_SH_SHMIN) += board-shmin..o +obj-$(CONFIG_SH_SHMIN) += board-shmin.o -- GitLab From 7d55992d60caa390460bad1a974eb2b3c11538f4 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sat, 2 Aug 2008 21:22:18 -0400 Subject: [PATCH 0646/1024] ext4: remove write-only variables from ext4_ordered_write_end The variables 'from' and 'to' are not used anywhere. Signed-off-by: Eric Sandeen Acked-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 0080999d2cd..59fbbe899ac 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1424,12 +1424,8 @@ static int ext4_ordered_write_end(struct file *file, { handle_t *handle = ext4_journal_current_handle(); struct inode *inode = mapping->host; - unsigned from, to; int ret = 0, ret2; - from = pos & (PAGE_CACHE_SIZE - 1); - to = from + len; - ret = ext4_jbd2_file_inode(handle, inode); if (ret == 0) { -- GitLab From 5fb662297b8a4bdadd60371c34b760efca948ebc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 2 Aug 2008 20:02:43 -0700 Subject: [PATCH 0647/1024] pkt_sched: Use qdisc_lock() on already sampled root qdisc. Based upon a bug report by Jeff Kirsher. Don't use qdisc_root_lock() in these cases as the root qdisc could have been changed, and we'd thus lock the wrong object. Tested by Emil S Tantilov who confirms that this seems to fix the problem. Signed-off-by: David S. Miller --- net/core/dev.c | 4 ++-- net/sched/sch_generic.c | 12 ++++++------ 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 69320a56a08..da7acacf02b 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1796,7 +1796,7 @@ gso: skb->tc_verd = SET_TC_AT(skb->tc_verd,AT_EGRESS); #endif if (q->enqueue) { - spinlock_t *root_lock = qdisc_root_lock(q); + spinlock_t *root_lock = qdisc_lock(q); spin_lock(root_lock); @@ -1995,7 +1995,7 @@ static void net_tx_action(struct softirq_action *h) smp_mb__before_clear_bit(); clear_bit(__QDISC_STATE_SCHED, &q->state); - root_lock = qdisc_root_lock(q); + root_lock = qdisc_lock(q); if (spin_trylock(root_lock)) { qdisc_run(q); spin_unlock(root_lock); diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index 9c9cd4d9489..7cf83b37459 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -29,7 +29,7 @@ /* Main transmission queue. */ /* Modifications to data participating in scheduling must be protected with - * qdisc_root_lock(qdisc) spinlock. + * qdisc_lock(qdisc) spinlock. * * The idea is the following: * - enqueue, dequeue are serialized via qdisc root lock @@ -126,7 +126,7 @@ static inline int qdisc_restart(struct Qdisc *q) if (unlikely((skb = dequeue_skb(q)) == NULL)) return 0; - root_lock = qdisc_root_lock(q); + root_lock = qdisc_lock(q); /* And release qdisc */ spin_unlock(root_lock); @@ -507,7 +507,7 @@ errout: } EXPORT_SYMBOL(qdisc_create_dflt); -/* Under qdisc_root_lock(qdisc) and BH! */ +/* Under qdisc_lock(qdisc) and BH! */ void qdisc_reset(struct Qdisc *qdisc) { @@ -543,7 +543,7 @@ static void __qdisc_destroy(struct rcu_head *head) kfree((char *) qdisc - qdisc->padded); } -/* Under qdisc_root_lock(qdisc) and BH! */ +/* Under qdisc_lock(qdisc) and BH! */ void qdisc_destroy(struct Qdisc *qdisc) { @@ -659,7 +659,7 @@ static bool some_qdisc_is_running(struct net_device *dev, int lock) dev_queue = netdev_get_tx_queue(dev, i); q = dev_queue->qdisc; - root_lock = qdisc_root_lock(q); + root_lock = qdisc_lock(q); if (lock) spin_lock_bh(root_lock); @@ -735,7 +735,7 @@ static void shutdown_scheduler_queue(struct net_device *dev, struct Qdisc *qdisc_default = _qdisc_default; if (qdisc) { - spinlock_t *root_lock = qdisc_root_lock(qdisc); + spinlock_t *root_lock = qdisc_lock(qdisc); dev_queue->qdisc = qdisc_default; dev_queue->qdisc_sleeping = qdisc_default; -- GitLab From 35ed4e75989c4e84a44b25569bbf09b98f923880 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 2 Aug 2008 23:25:50 -0700 Subject: [PATCH 0648/1024] mac80211: Use queue_lock() in ieee80211_ht_agg_queue_remove(). qdisc_root_lock() is only %100 safe to use when the RTNL semaphore is held. Signed-off-by: David S. Miller --- net/mac80211/wme.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 28437f0001d..4310e2f6566 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -241,12 +241,14 @@ void ieee80211_ht_agg_queue_remove(struct ieee80211_local *local, } else { struct netdev_queue *txq; spinlock_t *root_lock; + struct Qdisc *q; txq = netdev_get_tx_queue(local->mdev, agg_queue); - root_lock = qdisc_root_lock(txq->qdisc); + q = rcu_dereference(txq->qdisc); + root_lock = qdisc_lock(q); spin_lock_bh(root_lock); - qdisc_reset(txq->qdisc); + qdisc_reset(q); spin_unlock_bh(root_lock); } } -- GitLab From 7e43f1128d4c4bd91786ca6abff45a91e88f9776 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sat, 2 Aug 2008 23:27:37 -0700 Subject: [PATCH 0649/1024] pkt_sched: Make sure RTNL is held in qdisc_root_lock(). It is the only legal environment in which this can be used. Add some commentary explaining the situation. Signed-off-by: David S. Miller --- include/net/sch_generic.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index b5f40d7ef72..c5bb1306505 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -193,10 +193,22 @@ static inline struct Qdisc *qdisc_root(struct Qdisc *qdisc) return qdisc->dev_queue->qdisc; } +/* The qdisc root lock is a mechanism by which to top level + * of a qdisc tree can be locked from any qdisc node in the + * forest. This allows changing the configuration of some + * aspect of the qdisc tree while blocking out asynchronous + * qdisc access in the packet processing paths. + * + * It is only legal to do this when the root will not change + * on us. Otherwise we'll potentially lock the wrong qdisc + * root. This is enforced by holding the RTNL semaphore, which + * all users of this lock accessor must do. + */ static inline spinlock_t *qdisc_root_lock(struct Qdisc *qdisc) { struct Qdisc *root = qdisc_root(qdisc); + ASSERT_RTNL(); return qdisc_lock(root); } -- GitLab From bff69732c9947f821a64a8477f7dcaa9c30e6a69 Mon Sep 17 00:00:00 2001 From: Chris Larson Date: Sun, 3 Aug 2008 01:02:41 -0700 Subject: [PATCH 0650/1024] net: in the first call to neigh_seq_next, call neigh_get_first, not neigh_get_idx. neigh_seq_next won't be called both with *pos > 0 && v == SEQ_START_TOKEN, so there's no point calling neigh_get_idx when we're on the start token, just call neigh_get_first directly. Signed-off-by: Chris Larson Signed-off-by: David S. Miller --- net/core/neighbour.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/neighbour.c b/net/core/neighbour.c index f62c8af85d3..a57de755c8c 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -2385,7 +2385,7 @@ void *neigh_seq_next(struct seq_file *seq, void *v, loff_t *pos) void *rc; if (v == SEQ_START_TOKEN) { - rc = neigh_get_idx(seq, pos); + rc = neigh_get_first(seq); goto out; } -- GitLab From 745e203164a9057e0de769ff4649e6e455daf753 Mon Sep 17 00:00:00 2001 From: Chris Larson Date: Sun, 3 Aug 2008 01:10:55 -0700 Subject: [PATCH 0651/1024] net: fix missing pneigh entries in the neighbor seq_file code When pneigh entries exist, but the user's read buffer isn't sufficient to hold them all, one of the pneigh entries will be missing from the results. In neigh_get_idx_any, the number of elements which neigh_get_idx encountered is not correctly subtracted from the position number before the call to pneigh_get_idx. neigh_get_idx reduces the position by 1 for each call to neigh_get_next, but it does not reduce it by one for the first element (neigh_get_first). The patch alters the neigh_get_idx and pneigh_get_idx functions to subtract one from pos, for the first element, when pos is non-zero. Signed-off-by: Chris Larson Signed-off-by: David S. Miller --- net/core/neighbour.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/net/core/neighbour.c b/net/core/neighbour.c index a57de755c8c..9d92e41826e 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -2281,6 +2281,7 @@ static struct neighbour *neigh_get_idx(struct seq_file *seq, loff_t *pos) struct neighbour *n = neigh_get_first(seq); if (n) { + --(*pos); while (*pos) { n = neigh_get_next(seq, n, pos); if (!n) @@ -2341,6 +2342,7 @@ static struct pneigh_entry *pneigh_get_idx(struct seq_file *seq, loff_t *pos) struct pneigh_entry *pn = pneigh_get_first(seq); if (pn) { + --(*pos); while (*pos) { pn = pneigh_get_next(seq, pn, pos); if (!pn) @@ -2354,10 +2356,11 @@ static void *neigh_get_idx_any(struct seq_file *seq, loff_t *pos) { struct neigh_seq_state *state = seq->private; void *rc; + loff_t idxpos = *pos; - rc = neigh_get_idx(seq, pos); + rc = neigh_get_idx(seq, &idxpos); if (!rc && !(state->flags & NEIGH_SEQ_NEIGH_ONLY)) - rc = pneigh_get_idx(seq, pos); + rc = pneigh_get_idx(seq, &idxpos); return rc; } @@ -2366,7 +2369,6 @@ void *neigh_seq_start(struct seq_file *seq, loff_t *pos, struct neigh_table *tbl __acquires(tbl->lock) { struct neigh_seq_state *state = seq->private; - loff_t pos_minus_one; state->tbl = tbl; state->bucket = 0; @@ -2374,8 +2376,7 @@ void *neigh_seq_start(struct seq_file *seq, loff_t *pos, struct neigh_table *tbl read_lock_bh(&tbl->lock); - pos_minus_one = *pos - 1; - return *pos ? neigh_get_idx_any(seq, &pos_minus_one) : SEQ_START_TOKEN; + return *pos ? neigh_get_idx_any(seq, pos) : SEQ_START_TOKEN; } EXPORT_SYMBOL(neigh_seq_start); -- GitLab From e5a4a72d4f88f4389e9340d383ca67031d1b8536 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 3 Aug 2008 01:23:10 -0700 Subject: [PATCH 0652/1024] net: use software GSO for SG+CSUM capable netdevices If a netdevice does not support hardware GSO, allowing the stack to use GSO anyway and then splitting the GSO skb into MSS-sized pieces as it is handed to the netdevice for transmitting is likely still a win as far as throughput and/or CPU usage are concerned, since it reduces the number of trips through the output path. This patch enables the use of GSO on any netdevice that supports SG. If a GSO skb is then sent to a netdevice that supports SG but does not support hardware GSO, net/core/dev.c:dev_hard_start_xmit() will take care of doing the necessary GSO segmentation in software. Signed-off-by: Lennert Buytenhek Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/dev.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/core/dev.c b/net/core/dev.c index da7acacf02b..cbf80098980 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3988,6 +3988,10 @@ int register_netdevice(struct net_device *dev) } } + /* Enable software GSO if SG is supported. */ + if (dev->features & NETIF_F_SG) + dev->features |= NETIF_F_GSO; + netdev_initialize_kobject(dev); ret = netdev_register_kobject(dev); if (ret) -- GitLab From cf368d2f9aced8adc8bd6b1f04294a71551d5fce Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 3 Aug 2008 03:03:57 +0400 Subject: [PATCH 0653/1024] drivers/video/console/promcon.c: fix build error drivers/video/console/promcon.c:158: error: implicit declaration of function 'con_protect_unimap' Introduced by commit a29ccf6f823a84d89e1c7aaaf221cf7282022024 ("embedded: fix vc_translate operator precedence"). Signed-off-by: Alexander Beregalov Cc: Tim Bird Signed-off-by: David Woodhouse --- include/linux/vt_kern.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index 8c8119ffee1..1c78d56c57e 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -86,6 +86,7 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc); #define con_copy_unimap(d, s) (0) #define con_get_unimap(vc, ct, uct, list) (-EINVAL) #define con_free_unimap(vc) do { ; } while (0) +#define con_protect_unimap(vc, rdonly) do { ; } while (0) #define vc_translate(vc, c) (c) #endif -- GitLab From 9cb7117fa4858468014f76bd996076985111e955 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Sun, 3 Aug 2008 00:02:35 +0100 Subject: [PATCH 0654/1024] [ARM] 5182/1: pxa: Fix pcm990 compilation Compiling pcm990 produces an error: In file included from arch/arm/mach-pxa/pcm990-baseboard.c:25: include/linux/ide.h:645: error: 'CONFIG_IDE_MAX_HWIFS' undeclared here (not in a function) Fix it by removing unneeded header include. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Russell King --- arch/arm/mach-pxa/pcm990-baseboard.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 30023b00e47..90056d56b21 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -22,7 +22,6 @@ #include #include -#include #include #include -- GitLab From 8edd744202e83ac2fce13f4898a90b403cc22141 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 3 Aug 2008 22:18:48 +0800 Subject: [PATCH 0655/1024] arch/sh/boards/board-ap325rxa.c: removed duplicated #include Removed duplicated include in arch/sh/boards/board-ap325rxa.c. Signed-off-by: Huang Weiyi Signed-off-by: Paul Mundt --- arch/sh/boards/board-ap325rxa.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 9c71603d29a..025d4fe55a5 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include -- GitLab From c48e64ae574a1e30a23174701560a222a192e4c3 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 3 Aug 2008 22:18:51 +0800 Subject: [PATCH 0656/1024] arch/sh/boards/mach-se/7343/irq.c: removed duplicated #include Removed duplicated include in arch/sh/boards/mach-se/7343/irq.c. Signed-off-by: Huang Weiyi Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7343/irq.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c index 5d96e2eef82..051c29d4eae 100644 --- a/arch/sh/boards/mach-se/7343/irq.c +++ b/arch/sh/boards/mach-se/7343/irq.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include -- GitLab From adf044c8778de98dae29c5ce9973b7e43964674f Mon Sep 17 00:00:00 2001 From: Sven Wegener Date: Sun, 3 Aug 2008 14:06:44 -0700 Subject: [PATCH 0657/1024] net: Add missing extra2 parameter for ip_default_ttl sysctl Commit 76e6ebfb40a2455c18234dcb0f9df37533215461 ("netns: add namespace parameter to rt_cache_flush") acceses the extra2 parameter of the ip_default_ttl ctl_table, but it is never set to a meaningful value. When e84f84f276473dcc673f360e8ff3203148bdf0e2 ("netns: place rt_genid into struct net") is applied, we'll oops in rt_cache_invalidate(). Set extra2 to init_net, to avoid that. Reported-by: Marcin Slusarz Signed-off-by: Sven Wegener Tested-by: Marcin Slusarz Acked-by: Denis V. Lunev Signed-off-by: David S. Miller --- net/ipv4/sysctl_net_ipv4.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index 770d827f5ab..e0689fd7b79 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -232,6 +232,7 @@ static struct ctl_table ipv4_table[] = { .mode = 0644, .proc_handler = &ipv4_doint_and_flush, .strategy = &ipv4_doint_and_flush_strategy, + .extra2 = &init_net, }, { .ctl_name = NET_IPV4_NO_PMTU_DISC, -- GitLab From c07abb6dbec754511427dd847f10cfdec6d36b3c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 08:11:03 +0900 Subject: [PATCH 0658/1024] sh: /proc/asids depends on MMU. Signed-off-by: Paul Mundt --- arch/sh/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 36f4b1f7066..4d2d102e00d 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -182,7 +182,7 @@ if SUPERH64 config SH64_PROC_ASIDS bool "Debug: report ASIDs through /proc/asids" - depends on PROC_FS + depends on PROC_FS && MMU config SH64_SR_WATCH bool "Debug: set SR.WATCH to enable hardware watchpoints and trace" -- GitLab From 86d9d32c7b17f8145dc8cbc9667e6385bf8ebc67 Mon Sep 17 00:00:00 2001 From: Adrian McMenamin Date: Wed, 30 Jul 2008 12:31:38 -0700 Subject: [PATCH 0659/1024] maple: allow removal and reinsertion of keyboard driver module Allow the removal (and subsequent reinsertion) of the maple_keyb (maple keyboard) driver by adding a working removal function. Also tidy long lines. Signed-off-by: Adrian McMenamin Cc: Dmitry Torokhov Cc: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Paul Mundt --- drivers/input/keyboard/maple_keyb.c | 124 ++++++++++++++++++---------- 1 file changed, 81 insertions(+), 43 deletions(-) diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c index 7797ef6e5e6..7d13f55b504 100644 --- a/drivers/input/keyboard/maple_keyb.c +++ b/drivers/input/keyboard/maple_keyb.c @@ -2,7 +2,7 @@ * SEGA Dreamcast keyboard driver * Based on drivers/usb/usbkbd.c * Copyright YAEGASHI Takeshi, 2001 - * Porting to 2.6 Copyright Adrian McMenamin, 2007 + * Porting to 2.6 Copyright Adrian McMenamin, 2007, 2008 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -45,39 +45,51 @@ struct dc_kbd { }; static const unsigned short dc_kbd_keycode[NR_SCANCODES] = { - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_A, KEY_B, KEY_C, KEY_D, - KEY_E, KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, - KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, - KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_1, KEY_2, - KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_0, - KEY_ENTER, KEY_ESC, KEY_BACKSPACE, KEY_TAB, KEY_SPACE, KEY_MINUS, KEY_EQUAL, KEY_LEFTBRACE, - KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_BACKSLASH, KEY_SEMICOLON, KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA, - KEY_DOT, KEY_SLASH, KEY_CAPSLOCK, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_A, KEY_B, + KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, + KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, KEY_V, + KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, + KEY_7, KEY_8, KEY_9, KEY_0, KEY_ENTER, KEY_ESC, KEY_BACKSPACE, + KEY_TAB, KEY_SPACE, KEY_MINUS, KEY_EQUAL, KEY_LEFTBRACE, + KEY_RIGHTBRACE, KEY_BACKSLASH, KEY_BACKSLASH, KEY_SEMICOLON, + KEY_APOSTROPHE, KEY_GRAVE, KEY_COMMA, KEY_DOT, KEY_SLASH, + KEY_CAPSLOCK, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11, KEY_F12, KEY_SYSRQ, - KEY_SCROLLLOCK, KEY_PAUSE, KEY_INSERT, KEY_HOME, KEY_PAGEUP, KEY_DELETE, - KEY_END, KEY_PAGEDOWN, KEY_RIGHT, KEY_LEFT, KEY_DOWN, KEY_UP, - KEY_NUMLOCK, KEY_KPSLASH, KEY_KPASTERISK, KEY_KPMINUS, KEY_KPPLUS, KEY_KPENTER, KEY_KP1, KEY_KP2, - KEY_KP3, KEY_KP4, KEY_KP5, KEY_KP6, KEY_KP7, KEY_KP8, KEY_KP9, KEY_KP0, KEY_KPDOT, - KEY_102ND, KEY_COMPOSE, KEY_POWER, KEY_KPEQUAL, KEY_F13, KEY_F14, KEY_F15, - KEY_F16, KEY_F17, KEY_F18, KEY_F19, KEY_F20, - KEY_F21, KEY_F22, KEY_F23, KEY_F24, KEY_OPEN, KEY_HELP, KEY_PROPS, KEY_FRONT, - KEY_STOP, KEY_AGAIN, KEY_UNDO, KEY_CUT, KEY_COPY, KEY_PASTE, KEY_FIND, KEY_MUTE, - KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_KPCOMMA, KEY_RESERVED, KEY_RO, KEY_KATAKANAHIRAGANA , KEY_YEN, - KEY_HENKAN, KEY_MUHENKAN, KEY_KPJPCOMMA, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_HANGEUL, KEY_HANJA, KEY_KATAKANA, KEY_HIRAGANA, KEY_ZENKAKUHANKAKU, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, - KEY_LEFTCTRL, KEY_LEFTSHIFT, KEY_LEFTALT, KEY_LEFTMETA, KEY_RIGHTCTRL, KEY_RIGHTSHIFT, KEY_RIGHTALT, KEY_RIGHTMETA, - KEY_PLAYPAUSE, KEY_STOPCD, KEY_PREVIOUSSONG, KEY_NEXTSONG, KEY_EJECTCD, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE, - KEY_WWW, KEY_BACK, KEY_FORWARD, KEY_STOP, KEY_FIND, KEY_SCROLLUP, KEY_SCROLLDOWN, KEY_EDIT, KEY_SLEEP, - KEY_SCREENLOCK, KEY_REFRESH, KEY_CALC, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED + KEY_SCROLLLOCK, KEY_PAUSE, KEY_INSERT, KEY_HOME, KEY_PAGEUP, + KEY_DELETE, KEY_END, KEY_PAGEDOWN, KEY_RIGHT, KEY_LEFT, KEY_DOWN, + KEY_UP, KEY_NUMLOCK, KEY_KPSLASH, KEY_KPASTERISK, KEY_KPMINUS, + KEY_KPPLUS, KEY_KPENTER, KEY_KP1, KEY_KP2, KEY_KP3, KEY_KP4, KEY_KP5, + KEY_KP6, KEY_KP7, KEY_KP8, KEY_KP9, KEY_KP0, KEY_KPDOT, KEY_102ND, + KEY_COMPOSE, KEY_POWER, KEY_KPEQUAL, KEY_F13, KEY_F14, KEY_F15, + KEY_F16, KEY_F17, KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22, + KEY_F23, KEY_F24, KEY_OPEN, KEY_HELP, KEY_PROPS, KEY_FRONT, KEY_STOP, + KEY_AGAIN, KEY_UNDO, KEY_CUT, KEY_COPY, KEY_PASTE, KEY_FIND, KEY_MUTE, + KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_KPCOMMA, KEY_RESERVED, KEY_RO, KEY_KATAKANAHIRAGANA , KEY_YEN, + KEY_HENKAN, KEY_MUHENKAN, KEY_KPJPCOMMA, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_HANGEUL, KEY_HANJA, KEY_KATAKANA, KEY_HIRAGANA, + KEY_ZENKAKUHANKAKU, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, + KEY_RESERVED, KEY_RESERVED, KEY_LEFTCTRL, KEY_LEFTSHIFT, KEY_LEFTALT, + KEY_LEFTMETA, KEY_RIGHTCTRL, KEY_RIGHTSHIFT, KEY_RIGHTALT, + KEY_RIGHTMETA, KEY_PLAYPAUSE, KEY_STOPCD, KEY_PREVIOUSSONG, + KEY_NEXTSONG, KEY_EJECTCD, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE, + KEY_WWW, KEY_BACK, KEY_FORWARD, KEY_STOP, KEY_FIND, KEY_SCROLLUP, + KEY_SCROLLDOWN, KEY_EDIT, KEY_SLEEP, KEY_SCREENLOCK, KEY_REFRESH, + KEY_CALC, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED }; static void dc_scan_kbd(struct dc_kbd *kbd) @@ -151,14 +163,15 @@ static int dc_kbd_connect(struct maple_device *mdev) struct dc_kbd *kbd; struct input_dev *dev; - if (!(mdev->function & MAPLE_FUNC_KEYBOARD)) - return -EINVAL; - kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL); + if (!kbd) { + error = -ENOMEM; + goto fail_kbd; + } dev = input_allocate_device(); - if (!kbd || !dev) { + if (!dev) { error = -ENOMEM; - goto fail; + goto fail_dev; } mdev->private_data = kbd; @@ -169,7 +182,7 @@ static int dc_kbd_connect(struct maple_device *mdev) dev->name = mdev->product_name; dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); dev->keycode = kbd->keycode; - dev->keycodesize = sizeof (unsigned short); + dev->keycodesize = sizeof(unsigned short); dev->keycodemax = ARRAY_SIZE(kbd->keycode); dev->id.bustype = BUS_HOST; dev->dev.parent = &mdev->dev; @@ -186,12 +199,15 @@ static int dc_kbd_connect(struct maple_device *mdev) goto fail; /* Maple polling is locked to VBLANK - which may be just 50/s */ - maple_getcond_callback(mdev, dc_kbd_callback, HZ/50, MAPLE_FUNC_KEYBOARD); + maple_getcond_callback(mdev, dc_kbd_callback, HZ/50, + MAPLE_FUNC_KEYBOARD); return 0; - fail: +fail: input_free_device(dev); +fail_dev: kfree(kbd); +fail_kbd: mdev->private_data = NULL; return error; } @@ -201,7 +217,7 @@ static void dc_kbd_disconnect(struct maple_device *mdev) struct dc_kbd *kbd; mutex_lock(&maple_keyb_mutex); - + mdev->callback = NULL; kbd = mdev->private_data; mdev->private_data = NULL; input_unregister_device(kbd->dev); @@ -222,11 +238,18 @@ static int probe_maple_kbd(struct device *dev) return error; mdev->driver = mdrv; - mdev->registered = 1; return 0; } +static int remove_maple_kbd(struct device *dev) +{ + struct maple_device *mdev = to_maple_dev(dev); + + dc_kbd_disconnect(mdev); + return 0; +} + static struct maple_driver dc_kbd_driver = { .function = MAPLE_FUNC_KEYBOARD, .connect = dc_kbd_connect, @@ -234,9 +257,23 @@ static struct maple_driver dc_kbd_driver = { .drv = { .name = "Dreamcast_keyboard", .probe = probe_maple_kbd, + .remove = remove_maple_kbd, }, }; +static int unplug_maple_keyb(struct device *dev, void *ignored) +{ + /* Please DO NOT really unplug your keyboard */ + struct maple_device *mdev; + + mdev = to_maple_dev(dev); + if ((mdev->function & MAPLE_FUNC_KEYBOARD) + && (mdev->driver == &dc_kbd_driver)) + remove_maple_kbd(dev); + + return 0; +} + static int __init dc_kbd_init(void) { return maple_driver_register(&dc_kbd_driver.drv); @@ -244,6 +281,7 @@ static int __init dc_kbd_init(void) static void __exit dc_kbd_exit(void) { + bus_for_each_dev(&maple_bus_type, NULL, NULL, unplug_maple_keyb); driver_unregister(&dc_kbd_driver.drv); } -- GitLab From 459021fe3627083ea6678a7b29f9f74accf9c6fd Mon Sep 17 00:00:00 2001 From: Adrian McMenamin Date: Mon, 4 Aug 2008 10:09:03 +0900 Subject: [PATCH 0660/1024] input: Clean up maple keyboard driver Have a single probe function instead of a probe and a connect function. Also tidy a comment. Signed-off-by: Adrian McMenamin Signed-off-by: Paul Mundt --- drivers/input/keyboard/maple_keyb.c | 101 +++++++++------------------- 1 file changed, 32 insertions(+), 69 deletions(-) diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c index 7d13f55b504..42f5d4ec39a 100644 --- a/drivers/input/keyboard/maple_keyb.c +++ b/drivers/input/keyboard/maple_keyb.c @@ -143,8 +143,8 @@ static void dc_kbd_callback(struct mapleq *mq) unsigned long *buf = mq->recvbuf; /* - * We should always be getting the lock because the only - * time it may be locked if driver is in cleanup phase. + * We should always get the lock because the only + * time it may be locked is if the driver is in the cleanup phase. */ if (likely(mutex_trylock(&maple_keyb_mutex))) { @@ -157,103 +157,80 @@ static void dc_kbd_callback(struct mapleq *mq) } } -static int dc_kbd_connect(struct maple_device *mdev) +static int probe_maple_kbd(struct device *dev) { + struct maple_device *mdev = to_maple_dev(dev); + struct maple_driver *mdrv = to_maple_driver(dev->driver); int i, error; struct dc_kbd *kbd; - struct input_dev *dev; + struct input_dev *idev; + + if (!(mdev->function & MAPLE_FUNC_KEYBOARD)) + return -EINVAL; kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL); - if (!kbd) { + idev = input_allocate_device(); + if (!kbd || !idev) { error = -ENOMEM; - goto fail_kbd; - } - dev = input_allocate_device(); - if (!dev) { - error = -ENOMEM; - goto fail_dev; + goto fail; } mdev->private_data = kbd; - kbd->dev = dev; + kbd->dev = idev; memcpy(kbd->keycode, dc_kbd_keycode, sizeof(kbd->keycode)); - dev->name = mdev->product_name; - dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); - dev->keycode = kbd->keycode; - dev->keycodesize = sizeof(unsigned short); - dev->keycodemax = ARRAY_SIZE(kbd->keycode); - dev->id.bustype = BUS_HOST; - dev->dev.parent = &mdev->dev; + idev->name = mdev->product_name; + idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP); + idev->keycode = kbd->keycode; + idev->keycodesize = sizeof(unsigned short); + idev->keycodemax = ARRAY_SIZE(kbd->keycode); + idev->id.bustype = BUS_HOST; + idev->dev.parent = &mdev->dev; for (i = 0; i < NR_SCANCODES; i++) - __set_bit(dc_kbd_keycode[i], dev->keybit); - __clear_bit(KEY_RESERVED, dev->keybit); + __set_bit(dc_kbd_keycode[i], idev->keybit); + __clear_bit(KEY_RESERVED, idev->keybit); - input_set_capability(dev, EV_MSC, MSC_SCAN); - input_set_drvdata(dev, kbd); + input_set_capability(idev, EV_MSC, MSC_SCAN); + input_set_drvdata(idev, kbd); - error = input_register_device(dev); + error = input_register_device(idev); if (error) goto fail; /* Maple polling is locked to VBLANK - which may be just 50/s */ maple_getcond_callback(mdev, dc_kbd_callback, HZ/50, MAPLE_FUNC_KEYBOARD); - return 0; + + mdev->driver = mdrv; + return error; fail: - input_free_device(dev); -fail_dev: + input_free_device(idev); kfree(kbd); -fail_kbd: mdev->private_data = NULL; return error; } -static void dc_kbd_disconnect(struct maple_device *mdev) +static int remove_maple_kbd(struct device *dev) { + struct maple_device *mdev = to_maple_dev(dev); struct dc_kbd *kbd; mutex_lock(&maple_keyb_mutex); - mdev->callback = NULL; + kbd = mdev->private_data; mdev->private_data = NULL; input_unregister_device(kbd->dev); kfree(kbd); mutex_unlock(&maple_keyb_mutex); -} - -/* allow the keyboard to be used */ -static int probe_maple_kbd(struct device *dev) -{ - struct maple_device *mdev = to_maple_dev(dev); - struct maple_driver *mdrv = to_maple_driver(dev->driver); - int error; - - error = dc_kbd_connect(mdev); - if (error) - return error; - - mdev->driver = mdrv; - - return 0; -} - -static int remove_maple_kbd(struct device *dev) -{ - struct maple_device *mdev = to_maple_dev(dev); - - dc_kbd_disconnect(mdev); return 0; } static struct maple_driver dc_kbd_driver = { .function = MAPLE_FUNC_KEYBOARD, - .connect = dc_kbd_connect, - .disconnect = dc_kbd_disconnect, .drv = { .name = "Dreamcast_keyboard", .probe = probe_maple_kbd, @@ -261,19 +238,6 @@ static struct maple_driver dc_kbd_driver = { }, }; -static int unplug_maple_keyb(struct device *dev, void *ignored) -{ - /* Please DO NOT really unplug your keyboard */ - struct maple_device *mdev; - - mdev = to_maple_dev(dev); - if ((mdev->function & MAPLE_FUNC_KEYBOARD) - && (mdev->driver == &dc_kbd_driver)) - remove_maple_kbd(dev); - - return 0; -} - static int __init dc_kbd_init(void) { return maple_driver_register(&dc_kbd_driver.drv); @@ -281,7 +245,6 @@ static int __init dc_kbd_init(void) static void __exit dc_kbd_exit(void) { - bus_for_each_dev(&maple_bus_type, NULL, NULL, unplug_maple_keyb); driver_unregister(&dc_kbd_driver.drv); } -- GitLab From 1730554f253deb65fe5112c54b2f898d5318a328 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Sun, 3 Aug 2008 18:13:44 -0700 Subject: [PATCH 0661/1024] ipv6: syncookies: free reqsk on xfrm_lookup error cookie_v6_check() did not call reqsk_free() if xfrm_lookup() fails, leaking the request sock. Signed-off-by: Florian Westphal Signed-off-by: David S. Miller --- net/ipv6/syncookies.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c index a46badd1082..ec394cf5a19 100644 --- a/net/ipv6/syncookies.c +++ b/net/ipv6/syncookies.c @@ -199,10 +199,8 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb) ireq6 = inet6_rsk(req); treq = tcp_rsk(req); - if (security_inet_conn_request(sk, skb, req)) { - reqsk_free(req); - goto out; - } + if (security_inet_conn_request(sk, skb, req)) + goto out_free; req->mss = mss; ireq->rmt_port = th->source; @@ -255,14 +253,13 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb) fl.fl_ip_dport = inet_rsk(req)->rmt_port; fl.fl_ip_sport = inet_sk(sk)->sport; security_req_classify_flow(req, &fl); - if (ip6_dst_lookup(sk, &dst, &fl)) { - reqsk_free(req); - goto out; - } + if (ip6_dst_lookup(sk, &dst, &fl)) + goto out_free; + if (final_p) ipv6_addr_copy(&fl.fl6_dst, final_p); if ((xfrm_lookup(&dst, &fl, sk, 0)) < 0) - goto out; + goto out_free; } req->window_clamp = tp->window_clamp ? :dst_metric(dst, RTAX_WINDOW); @@ -273,7 +270,10 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb) ireq->rcv_wscale = rcv_wscale; ret = get_cookie_sock(sk, skb, req, dst); - -out: return ret; +out: + return ret; +out_free: + reqsk_free(req); + return NULL; } -- GitLab From cfb266c0ee0ea0b7bfa8189e3a3a80344dec6112 Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Sun, 3 Aug 2008 18:16:15 -0700 Subject: [PATCH 0662/1024] ipv6: Fix the return value of Set Hop-by-Hop options header with NULL data pointer When Set Hop-by-Hop options header with NULL data pointer and optlen is not zero use setsockopt(), the kernel successfully return 0 instead of return error EINVAL or EFAULT. This patch fix the problem. Signed-off-by: Yang Hongyang Signed-off-by: David S. Miller --- net/ipv6/ipv6_sockglue.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index ea33b26512c..741cfcd96f8 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -346,6 +346,8 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, */ if (optlen == 0) optval = NULL; + else if (optval == NULL) + goto e_inval; else if (optlen < sizeof(struct ipv6_opt_hdr) || optlen & 0x7 || optlen > 8 * 255) goto e_inval; -- GitLab From 63870295de9adb365cd121dab94379b8cfdf986a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 10:39:46 +0900 Subject: [PATCH 0663/1024] maple: Clean up maple_driver_register/unregister routines. These were completely inconsistent. Clean these up to take a maple_driver pointer directly for consistency. Signed-off-by: Paul Mundt --- drivers/input/keyboard/maple_keyb.c | 6 ++--- drivers/sh/maple/maple.c | 37 ++++++++++++++++++++--------- include/linux/maple.h | 4 +++- 3 files changed, 32 insertions(+), 15 deletions(-) diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c index 42f5d4ec39a..3f5151a0fd1 100644 --- a/drivers/input/keyboard/maple_keyb.c +++ b/drivers/input/keyboard/maple_keyb.c @@ -235,17 +235,17 @@ static struct maple_driver dc_kbd_driver = { .name = "Dreamcast_keyboard", .probe = probe_maple_kbd, .remove = remove_maple_kbd, - }, + }, }; static int __init dc_kbd_init(void) { - return maple_driver_register(&dc_kbd_driver.drv); + return maple_driver_register(&dc_kbd_driver); } static void __exit dc_kbd_exit(void) { - driver_unregister(&dc_kbd_driver.drv); + maple_driver_unregister(&dc_kbd_driver); } module_init(dc_kbd_init); diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index be97789fa5f..a6b4dc3cfcb 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -2,6 +2,7 @@ * Core maple bus functionality * * Copyright (C) 2007, 2008 Adrian McMenamin + * Copyright (C) 2001 - 2008 Paul Mundt * * Based on 2.4 code by: * @@ -31,7 +32,7 @@ #include #include -MODULE_AUTHOR("Yaegshi Takeshi, Paul Mundt, M.R. Brown, Adrian McMenamin"); +MODULE_AUTHOR("Yaegashi Takeshi, Paul Mundt, M. R. Brown, Adrian McMenamin"); MODULE_DESCRIPTION("Maple bus driver for Dreamcast"); MODULE_LICENSE("GPL v2"); MODULE_SUPPORTED_DEVICE("{{SEGA, Dreamcast/Maple}}"); @@ -65,19 +66,35 @@ static bool checked[4]; static struct maple_device *baseunits[4]; /** - * maple_driver_register - register a device driver - * automatically makes the driver bus a maple bus - * @drv: the driver to be registered + * maple_driver_register - register a maple driver + * @drv: maple driver to be registered. + * + * Registers the passed in @drv, while updating the bus type. + * Devices with matching function IDs will be automatically probed. */ -int maple_driver_register(struct device_driver *drv) +int maple_driver_register(struct maple_driver *drv) { if (!drv) return -EINVAL; - drv->bus = &maple_bus_type; - return driver_register(drv); + + drv->drv.bus = &maple_bus_type; + + return driver_register(&drv->drv); } EXPORT_SYMBOL_GPL(maple_driver_register); +/** + * maple_driver_unregister - unregister a maple driver. + * @drv: maple driver to unregister. + * + * Cleans up after maple_driver_register(). To be invoked in the exit + * path of any module drivers. + */ +void maple_driver_unregister(struct maple_driver *drv) +{ + driver_unregister(&drv->drv); +} + /* set hardware registers to enable next round of dma */ static void maplebus_dma_reset(void) { @@ -724,11 +741,9 @@ static int maple_get_dma_buffer(void) static int match_maple_bus_driver(struct device *devptr, struct device_driver *drvptr) { - struct maple_driver *maple_drv; - struct maple_device *maple_dev; + struct maple_driver *maple_drv = to_maple_driver(drvptr); + struct maple_device *maple_dev = to_maple_dev(devptr); - maple_drv = container_of(drvptr, struct maple_driver, drv); - maple_dev = container_of(devptr, struct maple_device, dev); /* Trap empty port case */ if (maple_dev->devinfo.function == 0xFFFFFFFF) return 0; diff --git a/include/linux/maple.h b/include/linux/maple.h index c853b106601..b2b7ce0fb1f 100644 --- a/include/linux/maple.h +++ b/include/linux/maple.h @@ -70,7 +70,9 @@ void maple_getcond_callback(struct maple_device *dev, void (*callback) (struct mapleq * mq), unsigned long interval, unsigned long function); -int maple_driver_register(struct device_driver *drv); +int maple_driver_register(struct maple_driver *); +void maple_driver_unregister(struct maple_driver *); + int maple_add_packet_sleeps(struct maple_device *mdev, u32 function, u32 command, u32 length, void *data); void maple_clear_dev(struct maple_device *mdev); -- GitLab From 617870632de6739fca0893f3e6648e9ae1bd0ddb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 10:58:24 +0900 Subject: [PATCH 0664/1024] maple: Kill useless private_data pointer. We can simply wrap in to the dev_set/get_drvdata(), there's no reason to track an extra level of private data on top of the struct device. Signed-off-by: Paul Mundt --- drivers/input/keyboard/maple_keyb.c | 15 ++++++++------- drivers/sh/maple/maple.c | 1 + include/linux/maple.h | 4 +++- 3 files changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/input/keyboard/maple_keyb.c b/drivers/input/keyboard/maple_keyb.c index 3f5151a0fd1..22f17a593be 100644 --- a/drivers/input/keyboard/maple_keyb.c +++ b/drivers/input/keyboard/maple_keyb.c @@ -139,7 +139,7 @@ static void dc_scan_kbd(struct dc_kbd *kbd) static void dc_kbd_callback(struct mapleq *mq) { struct maple_device *mapledev = mq->dev; - struct dc_kbd *kbd = mapledev->private_data; + struct dc_kbd *kbd = maple_get_drvdata(mapledev); unsigned long *buf = mq->recvbuf; /* @@ -175,8 +175,6 @@ static int probe_maple_kbd(struct device *dev) goto fail; } - mdev->private_data = kbd; - kbd->dev = idev; memcpy(kbd->keycode, dc_kbd_keycode, sizeof(kbd->keycode)); @@ -204,27 +202,30 @@ static int probe_maple_kbd(struct device *dev) MAPLE_FUNC_KEYBOARD); mdev->driver = mdrv; + + maple_set_drvdata(mdev, kbd); + return error; fail: input_free_device(idev); kfree(kbd); - mdev->private_data = NULL; + maple_set_drvdata(mdev, NULL); return error; } static int remove_maple_kbd(struct device *dev) { struct maple_device *mdev = to_maple_dev(dev); - struct dc_kbd *kbd; + struct dc_kbd *kbd = maple_get_drvdata(mdev); mutex_lock(&maple_keyb_mutex); - kbd = mdev->private_data; - mdev->private_data = NULL; input_unregister_device(kbd->dev); kfree(kbd); + maple_set_drvdata(mdev, NULL); + mutex_unlock(&maple_keyb_mutex); return 0; } diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index a6b4dc3cfcb..be77a39f224 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -94,6 +94,7 @@ void maple_driver_unregister(struct maple_driver *drv) { driver_unregister(&drv->drv); } +EXPORT_SYMBOL_GPL(maple_driver_unregister); /* set hardware registers to enable next round of dma */ static void maplebus_dma_reset(void) diff --git a/include/linux/maple.h b/include/linux/maple.h index b2b7ce0fb1f..c23d3f51ba4 100644 --- a/include/linux/maple.h +++ b/include/linux/maple.h @@ -51,7 +51,6 @@ struct maple_devinfo { struct maple_device { struct maple_driver *driver; struct mapleq *mq; - void *private_data; void (*callback) (struct mapleq * mq); unsigned long when, interval, function; struct maple_devinfo devinfo; @@ -80,4 +79,7 @@ void maple_clear_dev(struct maple_device *mdev); #define to_maple_dev(n) container_of(n, struct maple_device, dev) #define to_maple_driver(n) container_of(n, struct maple_driver, drv) +#define maple_get_drvdata(d) dev_get_drvdata(&(d)->dev) +#define maple_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, (p)) + #endif /* __LINUX_MAPLE_H */ -- GitLab From b8b572e1015f81b4e748417be2629dfe51ab99f9 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 1 Aug 2008 15:20:30 +1000 Subject: [PATCH 0665/1024] powerpc: Move include files to arch/powerpc/include/asm from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- Documentation/powerpc/booting-without-of.txt | 4 ++-- Documentation/powerpc/eeh-pci-error-recovery.txt | 2 +- arch/powerpc/boot/io.h | 2 +- {include/asm-powerpc => arch/powerpc/include/asm}/8253pit.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/8xx_immap.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/Kbuild | 0 {include/asm-powerpc => arch/powerpc/include/asm}/a.out.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/abs_addr.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/agp.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/asm-compat.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/atomic.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/auxvec.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/backlight.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/bitops.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/bootx.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/btext.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/bug.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/bugs.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/byteorder.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/cache.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/cacheflush.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/cell-pmu.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/cell-regs.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/checksum.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/clk_interface.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/code-patching.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/compat.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/cpm.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/cpm1.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/cpm2.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/cputable.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/cputhreads.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/cputime.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/current.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/dbdma.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/dcr-generic.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/dcr-mmio.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/dcr-native.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/dcr-regs.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/dcr.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/delay.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/device.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/div64.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/dma-mapping.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/dma.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/edac.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/eeh.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/eeh_event.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/elf.h | 0 .../powerpc/include/asm}/emergency-restart.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/errno.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/exception.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/fb.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/fcntl.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/feature-fixups.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/firmware.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/fixmap.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/floppy.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/fs_pd.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/fsl_gtm.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/fsl_lbc.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ftrace.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/futex.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/gpio.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/grackle.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/hardirq.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/heathrow.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/highmem.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/hugetlb.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/hvcall.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/hvconsole.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/hvcserver.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/hw_irq.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/hydra.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/i8259.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ibmebus.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ide.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/immap_86xx.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/immap_cpm2.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/immap_qe.h | 2 -- {include/asm-powerpc => arch/powerpc/include/asm}/io-defs.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/io.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ioctl.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ioctls.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/iommu.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ipcbuf.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ipic.h | 2 -- {include/asm-powerpc => arch/powerpc/include/asm}/irq.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/irq_regs.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/irqflags.h | 4 +--- .../asm-powerpc => arch/powerpc/include/asm}/iseries/alpaca.h | 0 .../powerpc/include/asm}/iseries/hv_call.h | 0 .../powerpc/include/asm}/iseries/hv_call_event.h | 0 .../powerpc/include/asm}/iseries/hv_call_sc.h | 0 .../powerpc/include/asm}/iseries/hv_call_xm.h | 0 .../powerpc/include/asm}/iseries/hv_lp_config.h | 0 .../powerpc/include/asm}/iseries/hv_lp_event.h | 0 .../powerpc/include/asm}/iseries/hv_types.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/iseries/iommu.h | 0 .../powerpc/include/asm}/iseries/it_lp_queue.h | 0 .../powerpc/include/asm}/iseries/lpar_map.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/iseries/mf.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/iseries/vio.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/kdebug.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/kdump.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/kexec.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/keylargo.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/kgdb.h | 2 -- .../asm-powerpc => arch/powerpc/include/asm}/kmap_types.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/kprobes.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/kvm.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/kvm_asm.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/kvm_host.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/kvm_para.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/kvm_ppc.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/libata-portmap.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/linkage.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/lmb.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/local.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/lppaca.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/lv1call.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/machdep.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/macio.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/mc146818rtc.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mediabay.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mman.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mmu-40x.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mmu-44x.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mmu-8xx.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/mmu-fsl-booke.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/mmu-hash32.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/mmu-hash64.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mmu.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/mmu_context.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mmzone.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/module.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mpc512x.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mpc52xx.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/mpc52xx_psc.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mpc6xx.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mpc8260.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mpc86xx.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mpc8xx.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mpic.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/msgbuf.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/mutex.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/nvram.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/of_device.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/of_platform.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ohare.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/oprofile_impl.h | 0 .../powerpc/include/asm}/pSeries_reconfig.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/paca.h | 2 -- {include/asm-powerpc => arch/powerpc/include/asm}/page.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/page_32.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/page_64.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/param.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/parport.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/pasemi_dma.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/pci-bridge.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/pci.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/percpu.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/pgalloc-32.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/pgalloc-64.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/pgalloc.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/pgtable-4k.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/pgtable-64k.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/pgtable-ppc32.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/pgtable-ppc64.h | 2 +- {include/asm-powerpc => arch/powerpc/include/asm}/pgtable.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/phyp_dump.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/pmac_feature.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/pmac_low_i2c.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/pmac_pfunc.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/pmc.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/pmi.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/poll.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/posix_types.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ppc-pci.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ppc4xx.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ppc_asm.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/processor.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/prom.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ps3.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ps3av.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ps3fb.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ps3stor.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ptrace.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/qe.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/qe_ic.h | 2 -- {include/asm-powerpc => arch/powerpc/include/asm}/reg.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/reg_8xx.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/reg_booke.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/reg_fsl_emb.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/resource.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/rheap.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/rio.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/rtas.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/rtc.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/rwsem.h | 4 ++-- .../asm-powerpc => arch/powerpc/include/asm}/scatterlist.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/seccomp.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/sections.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/sembuf.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/serial.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/setjmp.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/setup.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/shmbuf.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/shmparam.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/sigcontext.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/siginfo.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/signal.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/smp.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/smu.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/socket.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/sockios.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/sparsemem.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/spinlock.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/spinlock_types.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/spu.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/spu_csa.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/spu_info.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/spu_priv1.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/sstep.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/stat.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/statfs.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/string.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/suspend.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/synch.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/syscall.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/syscalls.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/systbl.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/system.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/tce.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/termbits.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/termios.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/thread_info.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/time.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/timex.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/tlb.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/tlbflush.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/topology.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/tsi108.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/tsi108_irq.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/tsi108_pci.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/types.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/uaccess.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ucc.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ucc_fast.h | 2 -- {include/asm-powerpc => arch/powerpc/include/asm}/ucc_slow.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/ucontext.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/udbg.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/uic.h | 2 -- {include/asm-powerpc => arch/powerpc/include/asm}/unaligned.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/uninorth.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/unistd.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/user.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/vdso.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/vdso_datapage.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/vga.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/vio.h | 0 .../asm-powerpc => arch/powerpc/include/asm}/xilinx_intc.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/xmon.h | 0 {include/asm-powerpc => arch/powerpc/include/asm}/xor.h | 0 arch/powerpc/mm/tlb_64.c | 2 +- arch/powerpc/platforms/86xx/mpc86xx_smp.c | 2 +- drivers/char/hvc_console.h | 2 +- drivers/char/hvcs.c | 2 +- drivers/infiniband/hw/ehca/ehca_reqs.c | 2 +- 269 files changed, 13 insertions(+), 29 deletions(-) rename {include/asm-powerpc => arch/powerpc/include/asm}/8253pit.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/8xx_immap.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/Kbuild (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/a.out.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/abs_addr.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/agp.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/asm-compat.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/atomic.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/auxvec.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/backlight.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/bitops.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/bootx.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/btext.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/bug.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/bugs.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/byteorder.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/cache.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/cacheflush.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/cell-pmu.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/cell-regs.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/checksum.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/clk_interface.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/code-patching.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/compat.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/cpm.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/cpm1.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/cpm2.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/cputable.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/cputhreads.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/cputime.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/current.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/dbdma.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/dcr-generic.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/dcr-mmio.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/dcr-native.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/dcr-regs.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/dcr.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/delay.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/device.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/div64.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/dma-mapping.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/dma.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/edac.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/eeh.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/eeh_event.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/elf.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/emergency-restart.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/errno.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/exception.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/fb.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/fcntl.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/feature-fixups.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/firmware.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/fixmap.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/floppy.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/fs_pd.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/fsl_gtm.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/fsl_lbc.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ftrace.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/futex.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/gpio.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/grackle.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/hardirq.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/heathrow.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/highmem.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/hugetlb.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/hvcall.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/hvconsole.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/hvcserver.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/hw_irq.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/hydra.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/i8259.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ibmebus.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ide.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/immap_86xx.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/immap_cpm2.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/immap_qe.h (99%) rename {include/asm-powerpc => arch/powerpc/include/asm}/io-defs.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/io.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ioctl.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ioctls.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/iommu.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ipcbuf.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ipic.h (99%) rename {include/asm-powerpc => arch/powerpc/include/asm}/irq.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/irq_regs.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/irqflags.h (93%) rename {include/asm-powerpc => arch/powerpc/include/asm}/iseries/alpaca.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/iseries/hv_call.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/iseries/hv_call_event.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/iseries/hv_call_sc.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/iseries/hv_call_xm.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/iseries/hv_lp_config.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/iseries/hv_lp_event.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/iseries/hv_types.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/iseries/iommu.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/iseries/it_lp_queue.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/iseries/lpar_map.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/iseries/mf.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/iseries/vio.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/kdebug.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/kdump.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/kexec.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/keylargo.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/kgdb.h (98%) rename {include/asm-powerpc => arch/powerpc/include/asm}/kmap_types.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/kprobes.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/kvm.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/kvm_asm.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/kvm_host.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/kvm_para.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/kvm_ppc.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/libata-portmap.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/linkage.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/lmb.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/local.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/lppaca.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/lv1call.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/machdep.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/macio.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mc146818rtc.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mediabay.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mman.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mmu-40x.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mmu-44x.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mmu-8xx.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mmu-fsl-booke.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mmu-hash32.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mmu-hash64.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mmu.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mmu_context.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mmzone.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/module.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mpc512x.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mpc52xx.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mpc52xx_psc.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mpc6xx.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mpc8260.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mpc86xx.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mpc8xx.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mpic.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/msgbuf.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/mutex.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/nvram.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/of_device.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/of_platform.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ohare.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/oprofile_impl.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pSeries_reconfig.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/paca.h (99%) rename {include/asm-powerpc => arch/powerpc/include/asm}/page.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/page_32.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/page_64.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/param.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/parport.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pasemi_dma.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pci-bridge.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pci.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/percpu.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pgalloc-32.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pgalloc-64.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pgalloc.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pgtable-4k.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pgtable-64k.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pgtable-ppc32.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pgtable-ppc64.h (99%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pgtable.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/phyp_dump.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pmac_feature.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pmac_low_i2c.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pmac_pfunc.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pmc.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/pmi.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/poll.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/posix_types.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ppc-pci.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ppc4xx.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ppc_asm.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/processor.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/prom.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ps3.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ps3av.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ps3fb.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ps3stor.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ptrace.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/qe.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/qe_ic.h (99%) rename {include/asm-powerpc => arch/powerpc/include/asm}/reg.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/reg_8xx.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/reg_booke.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/reg_fsl_emb.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/resource.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/rheap.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/rio.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/rtas.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/rtc.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/rwsem.h (96%) rename {include/asm-powerpc => arch/powerpc/include/asm}/scatterlist.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/seccomp.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/sections.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/sembuf.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/serial.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/setjmp.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/setup.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/shmbuf.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/shmparam.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/sigcontext.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/siginfo.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/signal.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/smp.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/smu.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/socket.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/sockios.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/sparsemem.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/spinlock.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/spinlock_types.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/spu.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/spu_csa.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/spu_info.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/spu_priv1.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/sstep.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/stat.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/statfs.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/string.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/suspend.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/synch.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/syscall.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/syscalls.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/systbl.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/system.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/tce.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/termbits.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/termios.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/thread_info.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/time.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/timex.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/tlb.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/tlbflush.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/topology.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/tsi108.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/tsi108_irq.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/tsi108_pci.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/types.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/uaccess.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ucc.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ucc_fast.h (99%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ucc_slow.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/ucontext.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/udbg.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/uic.h (95%) rename {include/asm-powerpc => arch/powerpc/include/asm}/unaligned.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/uninorth.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/unistd.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/user.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/vdso.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/vdso_datapage.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/vga.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/vio.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/xilinx_intc.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/xmon.h (100%) rename {include/asm-powerpc => arch/powerpc/include/asm}/xor.h (100%) diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 928a79ceb7a..de4063cb4fd 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -278,7 +278,7 @@ it with special cases. a 64-bit platform. d) request and get assigned a platform number (see PLATFORM_* - constants in include/asm-powerpc/processor.h + constants in arch/powerpc/include/asm/processor.h 32-bit embedded kernels: @@ -340,7 +340,7 @@ the block to RAM before passing it to the kernel. --------- The kernel is entered with r3 pointing to an area of memory that is - roughly described in include/asm-powerpc/prom.h by the structure + roughly described in arch/powerpc/include/asm/prom.h by the structure boot_param_header: struct boot_param_header { diff --git a/Documentation/powerpc/eeh-pci-error-recovery.txt b/Documentation/powerpc/eeh-pci-error-recovery.txt index df7afe43d46..9d4e33df624 100644 --- a/Documentation/powerpc/eeh-pci-error-recovery.txt +++ b/Documentation/powerpc/eeh-pci-error-recovery.txt @@ -133,7 +133,7 @@ error. Given an arbitrary address, the routine pci_get_device_by_addr() will find the pci device associated with that address (if any). -The default include/asm-powerpc/io.h macros readb(), inb(), insb(), +The default arch/powerpc/include/asm/io.h macros readb(), inb(), insb(), etc. include a check to see if the i/o read returned all-0xff's. If so, these make a call to eeh_dn_check_failure(), which in turn asks the firmware if the all-ff's value is the sign of a true EEH diff --git a/arch/powerpc/boot/io.h b/arch/powerpc/boot/io.h index ccaedaec50d..7c09f4861fe 100644 --- a/arch/powerpc/boot/io.h +++ b/arch/powerpc/boot/io.h @@ -6,7 +6,7 @@ /* * Low-level I/O routines. * - * Copied from (which has no copyright) + * Copied from (which has no copyright) */ static inline int in_8(const volatile unsigned char *addr) { diff --git a/include/asm-powerpc/8253pit.h b/arch/powerpc/include/asm/8253pit.h similarity index 100% rename from include/asm-powerpc/8253pit.h rename to arch/powerpc/include/asm/8253pit.h diff --git a/include/asm-powerpc/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h similarity index 100% rename from include/asm-powerpc/8xx_immap.h rename to arch/powerpc/include/asm/8xx_immap.h diff --git a/include/asm-powerpc/Kbuild b/arch/powerpc/include/asm/Kbuild similarity index 100% rename from include/asm-powerpc/Kbuild rename to arch/powerpc/include/asm/Kbuild diff --git a/include/asm-powerpc/a.out.h b/arch/powerpc/include/asm/a.out.h similarity index 100% rename from include/asm-powerpc/a.out.h rename to arch/powerpc/include/asm/a.out.h diff --git a/include/asm-powerpc/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h similarity index 100% rename from include/asm-powerpc/abs_addr.h rename to arch/powerpc/include/asm/abs_addr.h diff --git a/include/asm-powerpc/agp.h b/arch/powerpc/include/asm/agp.h similarity index 100% rename from include/asm-powerpc/agp.h rename to arch/powerpc/include/asm/agp.h diff --git a/include/asm-powerpc/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h similarity index 100% rename from include/asm-powerpc/asm-compat.h rename to arch/powerpc/include/asm/asm-compat.h diff --git a/include/asm-powerpc/atomic.h b/arch/powerpc/include/asm/atomic.h similarity index 100% rename from include/asm-powerpc/atomic.h rename to arch/powerpc/include/asm/atomic.h diff --git a/include/asm-powerpc/auxvec.h b/arch/powerpc/include/asm/auxvec.h similarity index 100% rename from include/asm-powerpc/auxvec.h rename to arch/powerpc/include/asm/auxvec.h diff --git a/include/asm-powerpc/backlight.h b/arch/powerpc/include/asm/backlight.h similarity index 100% rename from include/asm-powerpc/backlight.h rename to arch/powerpc/include/asm/backlight.h diff --git a/include/asm-powerpc/bitops.h b/arch/powerpc/include/asm/bitops.h similarity index 100% rename from include/asm-powerpc/bitops.h rename to arch/powerpc/include/asm/bitops.h diff --git a/include/asm-powerpc/bootx.h b/arch/powerpc/include/asm/bootx.h similarity index 100% rename from include/asm-powerpc/bootx.h rename to arch/powerpc/include/asm/bootx.h diff --git a/include/asm-powerpc/btext.h b/arch/powerpc/include/asm/btext.h similarity index 100% rename from include/asm-powerpc/btext.h rename to arch/powerpc/include/asm/btext.h diff --git a/include/asm-powerpc/bug.h b/arch/powerpc/include/asm/bug.h similarity index 100% rename from include/asm-powerpc/bug.h rename to arch/powerpc/include/asm/bug.h diff --git a/include/asm-powerpc/bugs.h b/arch/powerpc/include/asm/bugs.h similarity index 100% rename from include/asm-powerpc/bugs.h rename to arch/powerpc/include/asm/bugs.h diff --git a/include/asm-powerpc/byteorder.h b/arch/powerpc/include/asm/byteorder.h similarity index 100% rename from include/asm-powerpc/byteorder.h rename to arch/powerpc/include/asm/byteorder.h diff --git a/include/asm-powerpc/cache.h b/arch/powerpc/include/asm/cache.h similarity index 100% rename from include/asm-powerpc/cache.h rename to arch/powerpc/include/asm/cache.h diff --git a/include/asm-powerpc/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h similarity index 100% rename from include/asm-powerpc/cacheflush.h rename to arch/powerpc/include/asm/cacheflush.h diff --git a/include/asm-powerpc/cell-pmu.h b/arch/powerpc/include/asm/cell-pmu.h similarity index 100% rename from include/asm-powerpc/cell-pmu.h rename to arch/powerpc/include/asm/cell-pmu.h diff --git a/include/asm-powerpc/cell-regs.h b/arch/powerpc/include/asm/cell-regs.h similarity index 100% rename from include/asm-powerpc/cell-regs.h rename to arch/powerpc/include/asm/cell-regs.h diff --git a/include/asm-powerpc/checksum.h b/arch/powerpc/include/asm/checksum.h similarity index 100% rename from include/asm-powerpc/checksum.h rename to arch/powerpc/include/asm/checksum.h diff --git a/include/asm-powerpc/clk_interface.h b/arch/powerpc/include/asm/clk_interface.h similarity index 100% rename from include/asm-powerpc/clk_interface.h rename to arch/powerpc/include/asm/clk_interface.h diff --git a/include/asm-powerpc/code-patching.h b/arch/powerpc/include/asm/code-patching.h similarity index 100% rename from include/asm-powerpc/code-patching.h rename to arch/powerpc/include/asm/code-patching.h diff --git a/include/asm-powerpc/compat.h b/arch/powerpc/include/asm/compat.h similarity index 100% rename from include/asm-powerpc/compat.h rename to arch/powerpc/include/asm/compat.h diff --git a/include/asm-powerpc/cpm.h b/arch/powerpc/include/asm/cpm.h similarity index 100% rename from include/asm-powerpc/cpm.h rename to arch/powerpc/include/asm/cpm.h diff --git a/include/asm-powerpc/cpm1.h b/arch/powerpc/include/asm/cpm1.h similarity index 100% rename from include/asm-powerpc/cpm1.h rename to arch/powerpc/include/asm/cpm1.h diff --git a/include/asm-powerpc/cpm2.h b/arch/powerpc/include/asm/cpm2.h similarity index 100% rename from include/asm-powerpc/cpm2.h rename to arch/powerpc/include/asm/cpm2.h diff --git a/include/asm-powerpc/cputable.h b/arch/powerpc/include/asm/cputable.h similarity index 100% rename from include/asm-powerpc/cputable.h rename to arch/powerpc/include/asm/cputable.h diff --git a/include/asm-powerpc/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h similarity index 100% rename from include/asm-powerpc/cputhreads.h rename to arch/powerpc/include/asm/cputhreads.h diff --git a/include/asm-powerpc/cputime.h b/arch/powerpc/include/asm/cputime.h similarity index 100% rename from include/asm-powerpc/cputime.h rename to arch/powerpc/include/asm/cputime.h diff --git a/include/asm-powerpc/current.h b/arch/powerpc/include/asm/current.h similarity index 100% rename from include/asm-powerpc/current.h rename to arch/powerpc/include/asm/current.h diff --git a/include/asm-powerpc/dbdma.h b/arch/powerpc/include/asm/dbdma.h similarity index 100% rename from include/asm-powerpc/dbdma.h rename to arch/powerpc/include/asm/dbdma.h diff --git a/include/asm-powerpc/dcr-generic.h b/arch/powerpc/include/asm/dcr-generic.h similarity index 100% rename from include/asm-powerpc/dcr-generic.h rename to arch/powerpc/include/asm/dcr-generic.h diff --git a/include/asm-powerpc/dcr-mmio.h b/arch/powerpc/include/asm/dcr-mmio.h similarity index 100% rename from include/asm-powerpc/dcr-mmio.h rename to arch/powerpc/include/asm/dcr-mmio.h diff --git a/include/asm-powerpc/dcr-native.h b/arch/powerpc/include/asm/dcr-native.h similarity index 100% rename from include/asm-powerpc/dcr-native.h rename to arch/powerpc/include/asm/dcr-native.h diff --git a/include/asm-powerpc/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h similarity index 100% rename from include/asm-powerpc/dcr-regs.h rename to arch/powerpc/include/asm/dcr-regs.h diff --git a/include/asm-powerpc/dcr.h b/arch/powerpc/include/asm/dcr.h similarity index 100% rename from include/asm-powerpc/dcr.h rename to arch/powerpc/include/asm/dcr.h diff --git a/include/asm-powerpc/delay.h b/arch/powerpc/include/asm/delay.h similarity index 100% rename from include/asm-powerpc/delay.h rename to arch/powerpc/include/asm/delay.h diff --git a/include/asm-powerpc/device.h b/arch/powerpc/include/asm/device.h similarity index 100% rename from include/asm-powerpc/device.h rename to arch/powerpc/include/asm/device.h diff --git a/include/asm-powerpc/div64.h b/arch/powerpc/include/asm/div64.h similarity index 100% rename from include/asm-powerpc/div64.h rename to arch/powerpc/include/asm/div64.h diff --git a/include/asm-powerpc/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h similarity index 100% rename from include/asm-powerpc/dma-mapping.h rename to arch/powerpc/include/asm/dma-mapping.h diff --git a/include/asm-powerpc/dma.h b/arch/powerpc/include/asm/dma.h similarity index 100% rename from include/asm-powerpc/dma.h rename to arch/powerpc/include/asm/dma.h diff --git a/include/asm-powerpc/edac.h b/arch/powerpc/include/asm/edac.h similarity index 100% rename from include/asm-powerpc/edac.h rename to arch/powerpc/include/asm/edac.h diff --git a/include/asm-powerpc/eeh.h b/arch/powerpc/include/asm/eeh.h similarity index 100% rename from include/asm-powerpc/eeh.h rename to arch/powerpc/include/asm/eeh.h diff --git a/include/asm-powerpc/eeh_event.h b/arch/powerpc/include/asm/eeh_event.h similarity index 100% rename from include/asm-powerpc/eeh_event.h rename to arch/powerpc/include/asm/eeh_event.h diff --git a/include/asm-powerpc/elf.h b/arch/powerpc/include/asm/elf.h similarity index 100% rename from include/asm-powerpc/elf.h rename to arch/powerpc/include/asm/elf.h diff --git a/include/asm-powerpc/emergency-restart.h b/arch/powerpc/include/asm/emergency-restart.h similarity index 100% rename from include/asm-powerpc/emergency-restart.h rename to arch/powerpc/include/asm/emergency-restart.h diff --git a/include/asm-powerpc/errno.h b/arch/powerpc/include/asm/errno.h similarity index 100% rename from include/asm-powerpc/errno.h rename to arch/powerpc/include/asm/errno.h diff --git a/include/asm-powerpc/exception.h b/arch/powerpc/include/asm/exception.h similarity index 100% rename from include/asm-powerpc/exception.h rename to arch/powerpc/include/asm/exception.h diff --git a/include/asm-powerpc/fb.h b/arch/powerpc/include/asm/fb.h similarity index 100% rename from include/asm-powerpc/fb.h rename to arch/powerpc/include/asm/fb.h diff --git a/include/asm-powerpc/fcntl.h b/arch/powerpc/include/asm/fcntl.h similarity index 100% rename from include/asm-powerpc/fcntl.h rename to arch/powerpc/include/asm/fcntl.h diff --git a/include/asm-powerpc/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h similarity index 100% rename from include/asm-powerpc/feature-fixups.h rename to arch/powerpc/include/asm/feature-fixups.h diff --git a/include/asm-powerpc/firmware.h b/arch/powerpc/include/asm/firmware.h similarity index 100% rename from include/asm-powerpc/firmware.h rename to arch/powerpc/include/asm/firmware.h diff --git a/include/asm-powerpc/fixmap.h b/arch/powerpc/include/asm/fixmap.h similarity index 100% rename from include/asm-powerpc/fixmap.h rename to arch/powerpc/include/asm/fixmap.h diff --git a/include/asm-powerpc/floppy.h b/arch/powerpc/include/asm/floppy.h similarity index 100% rename from include/asm-powerpc/floppy.h rename to arch/powerpc/include/asm/floppy.h diff --git a/include/asm-powerpc/fs_pd.h b/arch/powerpc/include/asm/fs_pd.h similarity index 100% rename from include/asm-powerpc/fs_pd.h rename to arch/powerpc/include/asm/fs_pd.h diff --git a/include/asm-powerpc/fsl_gtm.h b/arch/powerpc/include/asm/fsl_gtm.h similarity index 100% rename from include/asm-powerpc/fsl_gtm.h rename to arch/powerpc/include/asm/fsl_gtm.h diff --git a/include/asm-powerpc/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h similarity index 100% rename from include/asm-powerpc/fsl_lbc.h rename to arch/powerpc/include/asm/fsl_lbc.h diff --git a/include/asm-powerpc/ftrace.h b/arch/powerpc/include/asm/ftrace.h similarity index 100% rename from include/asm-powerpc/ftrace.h rename to arch/powerpc/include/asm/ftrace.h diff --git a/include/asm-powerpc/futex.h b/arch/powerpc/include/asm/futex.h similarity index 100% rename from include/asm-powerpc/futex.h rename to arch/powerpc/include/asm/futex.h diff --git a/include/asm-powerpc/gpio.h b/arch/powerpc/include/asm/gpio.h similarity index 100% rename from include/asm-powerpc/gpio.h rename to arch/powerpc/include/asm/gpio.h diff --git a/include/asm-powerpc/grackle.h b/arch/powerpc/include/asm/grackle.h similarity index 100% rename from include/asm-powerpc/grackle.h rename to arch/powerpc/include/asm/grackle.h diff --git a/include/asm-powerpc/hardirq.h b/arch/powerpc/include/asm/hardirq.h similarity index 100% rename from include/asm-powerpc/hardirq.h rename to arch/powerpc/include/asm/hardirq.h diff --git a/include/asm-powerpc/heathrow.h b/arch/powerpc/include/asm/heathrow.h similarity index 100% rename from include/asm-powerpc/heathrow.h rename to arch/powerpc/include/asm/heathrow.h diff --git a/include/asm-powerpc/highmem.h b/arch/powerpc/include/asm/highmem.h similarity index 100% rename from include/asm-powerpc/highmem.h rename to arch/powerpc/include/asm/highmem.h diff --git a/include/asm-powerpc/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h similarity index 100% rename from include/asm-powerpc/hugetlb.h rename to arch/powerpc/include/asm/hugetlb.h diff --git a/include/asm-powerpc/hvcall.h b/arch/powerpc/include/asm/hvcall.h similarity index 100% rename from include/asm-powerpc/hvcall.h rename to arch/powerpc/include/asm/hvcall.h diff --git a/include/asm-powerpc/hvconsole.h b/arch/powerpc/include/asm/hvconsole.h similarity index 100% rename from include/asm-powerpc/hvconsole.h rename to arch/powerpc/include/asm/hvconsole.h diff --git a/include/asm-powerpc/hvcserver.h b/arch/powerpc/include/asm/hvcserver.h similarity index 100% rename from include/asm-powerpc/hvcserver.h rename to arch/powerpc/include/asm/hvcserver.h diff --git a/include/asm-powerpc/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h similarity index 100% rename from include/asm-powerpc/hw_irq.h rename to arch/powerpc/include/asm/hw_irq.h diff --git a/include/asm-powerpc/hydra.h b/arch/powerpc/include/asm/hydra.h similarity index 100% rename from include/asm-powerpc/hydra.h rename to arch/powerpc/include/asm/hydra.h diff --git a/include/asm-powerpc/i8259.h b/arch/powerpc/include/asm/i8259.h similarity index 100% rename from include/asm-powerpc/i8259.h rename to arch/powerpc/include/asm/i8259.h diff --git a/include/asm-powerpc/ibmebus.h b/arch/powerpc/include/asm/ibmebus.h similarity index 100% rename from include/asm-powerpc/ibmebus.h rename to arch/powerpc/include/asm/ibmebus.h diff --git a/include/asm-powerpc/ide.h b/arch/powerpc/include/asm/ide.h similarity index 100% rename from include/asm-powerpc/ide.h rename to arch/powerpc/include/asm/ide.h diff --git a/include/asm-powerpc/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h similarity index 100% rename from include/asm-powerpc/immap_86xx.h rename to arch/powerpc/include/asm/immap_86xx.h diff --git a/include/asm-powerpc/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h similarity index 100% rename from include/asm-powerpc/immap_cpm2.h rename to arch/powerpc/include/asm/immap_cpm2.h diff --git a/include/asm-powerpc/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h similarity index 99% rename from include/asm-powerpc/immap_qe.h rename to arch/powerpc/include/asm/immap_qe.h index 7b6f411db3e..3c2fced3ac2 100644 --- a/include/asm-powerpc/immap_qe.h +++ b/arch/powerpc/include/asm/immap_qe.h @@ -1,6 +1,4 @@ /* - * include/asm-powerpc/immap_qe.h - * * QUICC Engine (QE) Internal Memory Map. * The Internal Memory Map for devices with QE on them. This * is the superset of all QE devices (8360, etc.). diff --git a/include/asm-powerpc/io-defs.h b/arch/powerpc/include/asm/io-defs.h similarity index 100% rename from include/asm-powerpc/io-defs.h rename to arch/powerpc/include/asm/io-defs.h diff --git a/include/asm-powerpc/io.h b/arch/powerpc/include/asm/io.h similarity index 100% rename from include/asm-powerpc/io.h rename to arch/powerpc/include/asm/io.h diff --git a/include/asm-powerpc/ioctl.h b/arch/powerpc/include/asm/ioctl.h similarity index 100% rename from include/asm-powerpc/ioctl.h rename to arch/powerpc/include/asm/ioctl.h diff --git a/include/asm-powerpc/ioctls.h b/arch/powerpc/include/asm/ioctls.h similarity index 100% rename from include/asm-powerpc/ioctls.h rename to arch/powerpc/include/asm/ioctls.h diff --git a/include/asm-powerpc/iommu.h b/arch/powerpc/include/asm/iommu.h similarity index 100% rename from include/asm-powerpc/iommu.h rename to arch/powerpc/include/asm/iommu.h diff --git a/include/asm-powerpc/ipcbuf.h b/arch/powerpc/include/asm/ipcbuf.h similarity index 100% rename from include/asm-powerpc/ipcbuf.h rename to arch/powerpc/include/asm/ipcbuf.h diff --git a/include/asm-powerpc/ipic.h b/arch/powerpc/include/asm/ipic.h similarity index 99% rename from include/asm-powerpc/ipic.h rename to arch/powerpc/include/asm/ipic.h index 8ff08be0014..4cf35531c0e 100644 --- a/include/asm-powerpc/ipic.h +++ b/arch/powerpc/include/asm/ipic.h @@ -1,6 +1,4 @@ /* - * include/asm-powerpc/ipic.h - * * IPIC external definitions and structure. * * Maintainer: Kumar Gala diff --git a/include/asm-powerpc/irq.h b/arch/powerpc/include/asm/irq.h similarity index 100% rename from include/asm-powerpc/irq.h rename to arch/powerpc/include/asm/irq.h diff --git a/include/asm-powerpc/irq_regs.h b/arch/powerpc/include/asm/irq_regs.h similarity index 100% rename from include/asm-powerpc/irq_regs.h rename to arch/powerpc/include/asm/irq_regs.h diff --git a/include/asm-powerpc/irqflags.h b/arch/powerpc/include/asm/irqflags.h similarity index 93% rename from include/asm-powerpc/irqflags.h rename to arch/powerpc/include/asm/irqflags.h index cc6fdba3366..17ba3a881bf 100644 --- a/include/asm-powerpc/irqflags.h +++ b/arch/powerpc/include/asm/irqflags.h @@ -1,6 +1,4 @@ /* - * include/asm-powerpc/irqflags.h - * * IRQ flags handling */ #ifndef _ASM_IRQFLAGS_H @@ -10,7 +8,7 @@ /* * Get definitions for raw_local_save_flags(x), etc. */ -#include +#include #else #ifdef CONFIG_TRACE_IRQFLAGS diff --git a/include/asm-powerpc/iseries/alpaca.h b/arch/powerpc/include/asm/iseries/alpaca.h similarity index 100% rename from include/asm-powerpc/iseries/alpaca.h rename to arch/powerpc/include/asm/iseries/alpaca.h diff --git a/include/asm-powerpc/iseries/hv_call.h b/arch/powerpc/include/asm/iseries/hv_call.h similarity index 100% rename from include/asm-powerpc/iseries/hv_call.h rename to arch/powerpc/include/asm/iseries/hv_call.h diff --git a/include/asm-powerpc/iseries/hv_call_event.h b/arch/powerpc/include/asm/iseries/hv_call_event.h similarity index 100% rename from include/asm-powerpc/iseries/hv_call_event.h rename to arch/powerpc/include/asm/iseries/hv_call_event.h diff --git a/include/asm-powerpc/iseries/hv_call_sc.h b/arch/powerpc/include/asm/iseries/hv_call_sc.h similarity index 100% rename from include/asm-powerpc/iseries/hv_call_sc.h rename to arch/powerpc/include/asm/iseries/hv_call_sc.h diff --git a/include/asm-powerpc/iseries/hv_call_xm.h b/arch/powerpc/include/asm/iseries/hv_call_xm.h similarity index 100% rename from include/asm-powerpc/iseries/hv_call_xm.h rename to arch/powerpc/include/asm/iseries/hv_call_xm.h diff --git a/include/asm-powerpc/iseries/hv_lp_config.h b/arch/powerpc/include/asm/iseries/hv_lp_config.h similarity index 100% rename from include/asm-powerpc/iseries/hv_lp_config.h rename to arch/powerpc/include/asm/iseries/hv_lp_config.h diff --git a/include/asm-powerpc/iseries/hv_lp_event.h b/arch/powerpc/include/asm/iseries/hv_lp_event.h similarity index 100% rename from include/asm-powerpc/iseries/hv_lp_event.h rename to arch/powerpc/include/asm/iseries/hv_lp_event.h diff --git a/include/asm-powerpc/iseries/hv_types.h b/arch/powerpc/include/asm/iseries/hv_types.h similarity index 100% rename from include/asm-powerpc/iseries/hv_types.h rename to arch/powerpc/include/asm/iseries/hv_types.h diff --git a/include/asm-powerpc/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h similarity index 100% rename from include/asm-powerpc/iseries/iommu.h rename to arch/powerpc/include/asm/iseries/iommu.h diff --git a/include/asm-powerpc/iseries/it_lp_queue.h b/arch/powerpc/include/asm/iseries/it_lp_queue.h similarity index 100% rename from include/asm-powerpc/iseries/it_lp_queue.h rename to arch/powerpc/include/asm/iseries/it_lp_queue.h diff --git a/include/asm-powerpc/iseries/lpar_map.h b/arch/powerpc/include/asm/iseries/lpar_map.h similarity index 100% rename from include/asm-powerpc/iseries/lpar_map.h rename to arch/powerpc/include/asm/iseries/lpar_map.h diff --git a/include/asm-powerpc/iseries/mf.h b/arch/powerpc/include/asm/iseries/mf.h similarity index 100% rename from include/asm-powerpc/iseries/mf.h rename to arch/powerpc/include/asm/iseries/mf.h diff --git a/include/asm-powerpc/iseries/vio.h b/arch/powerpc/include/asm/iseries/vio.h similarity index 100% rename from include/asm-powerpc/iseries/vio.h rename to arch/powerpc/include/asm/iseries/vio.h diff --git a/include/asm-powerpc/kdebug.h b/arch/powerpc/include/asm/kdebug.h similarity index 100% rename from include/asm-powerpc/kdebug.h rename to arch/powerpc/include/asm/kdebug.h diff --git a/include/asm-powerpc/kdump.h b/arch/powerpc/include/asm/kdump.h similarity index 100% rename from include/asm-powerpc/kdump.h rename to arch/powerpc/include/asm/kdump.h diff --git a/include/asm-powerpc/kexec.h b/arch/powerpc/include/asm/kexec.h similarity index 100% rename from include/asm-powerpc/kexec.h rename to arch/powerpc/include/asm/kexec.h diff --git a/include/asm-powerpc/keylargo.h b/arch/powerpc/include/asm/keylargo.h similarity index 100% rename from include/asm-powerpc/keylargo.h rename to arch/powerpc/include/asm/keylargo.h diff --git a/include/asm-powerpc/kgdb.h b/arch/powerpc/include/asm/kgdb.h similarity index 98% rename from include/asm-powerpc/kgdb.h rename to arch/powerpc/include/asm/kgdb.h index 1399caf719a..edd217006d2 100644 --- a/include/asm-powerpc/kgdb.h +++ b/arch/powerpc/include/asm/kgdb.h @@ -1,6 +1,4 @@ /* - * include/asm-powerpc/kgdb.h - * * The PowerPC (32/64) specific defines / externs for KGDB. Based on * the previous 32bit and 64bit specific files, which had the following * copyrights: diff --git a/include/asm-powerpc/kmap_types.h b/arch/powerpc/include/asm/kmap_types.h similarity index 100% rename from include/asm-powerpc/kmap_types.h rename to arch/powerpc/include/asm/kmap_types.h diff --git a/include/asm-powerpc/kprobes.h b/arch/powerpc/include/asm/kprobes.h similarity index 100% rename from include/asm-powerpc/kprobes.h rename to arch/powerpc/include/asm/kprobes.h diff --git a/include/asm-powerpc/kvm.h b/arch/powerpc/include/asm/kvm.h similarity index 100% rename from include/asm-powerpc/kvm.h rename to arch/powerpc/include/asm/kvm.h diff --git a/include/asm-powerpc/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h similarity index 100% rename from include/asm-powerpc/kvm_asm.h rename to arch/powerpc/include/asm/kvm_asm.h diff --git a/include/asm-powerpc/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h similarity index 100% rename from include/asm-powerpc/kvm_host.h rename to arch/powerpc/include/asm/kvm_host.h diff --git a/include/asm-powerpc/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h similarity index 100% rename from include/asm-powerpc/kvm_para.h rename to arch/powerpc/include/asm/kvm_para.h diff --git a/include/asm-powerpc/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h similarity index 100% rename from include/asm-powerpc/kvm_ppc.h rename to arch/powerpc/include/asm/kvm_ppc.h diff --git a/include/asm-powerpc/libata-portmap.h b/arch/powerpc/include/asm/libata-portmap.h similarity index 100% rename from include/asm-powerpc/libata-portmap.h rename to arch/powerpc/include/asm/libata-portmap.h diff --git a/include/asm-powerpc/linkage.h b/arch/powerpc/include/asm/linkage.h similarity index 100% rename from include/asm-powerpc/linkage.h rename to arch/powerpc/include/asm/linkage.h diff --git a/include/asm-powerpc/lmb.h b/arch/powerpc/include/asm/lmb.h similarity index 100% rename from include/asm-powerpc/lmb.h rename to arch/powerpc/include/asm/lmb.h diff --git a/include/asm-powerpc/local.h b/arch/powerpc/include/asm/local.h similarity index 100% rename from include/asm-powerpc/local.h rename to arch/powerpc/include/asm/local.h diff --git a/include/asm-powerpc/lppaca.h b/arch/powerpc/include/asm/lppaca.h similarity index 100% rename from include/asm-powerpc/lppaca.h rename to arch/powerpc/include/asm/lppaca.h diff --git a/include/asm-powerpc/lv1call.h b/arch/powerpc/include/asm/lv1call.h similarity index 100% rename from include/asm-powerpc/lv1call.h rename to arch/powerpc/include/asm/lv1call.h diff --git a/include/asm-powerpc/machdep.h b/arch/powerpc/include/asm/machdep.h similarity index 100% rename from include/asm-powerpc/machdep.h rename to arch/powerpc/include/asm/machdep.h diff --git a/include/asm-powerpc/macio.h b/arch/powerpc/include/asm/macio.h similarity index 100% rename from include/asm-powerpc/macio.h rename to arch/powerpc/include/asm/macio.h diff --git a/include/asm-powerpc/mc146818rtc.h b/arch/powerpc/include/asm/mc146818rtc.h similarity index 100% rename from include/asm-powerpc/mc146818rtc.h rename to arch/powerpc/include/asm/mc146818rtc.h diff --git a/include/asm-powerpc/mediabay.h b/arch/powerpc/include/asm/mediabay.h similarity index 100% rename from include/asm-powerpc/mediabay.h rename to arch/powerpc/include/asm/mediabay.h diff --git a/include/asm-powerpc/mman.h b/arch/powerpc/include/asm/mman.h similarity index 100% rename from include/asm-powerpc/mman.h rename to arch/powerpc/include/asm/mman.h diff --git a/include/asm-powerpc/mmu-40x.h b/arch/powerpc/include/asm/mmu-40x.h similarity index 100% rename from include/asm-powerpc/mmu-40x.h rename to arch/powerpc/include/asm/mmu-40x.h diff --git a/include/asm-powerpc/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h similarity index 100% rename from include/asm-powerpc/mmu-44x.h rename to arch/powerpc/include/asm/mmu-44x.h diff --git a/include/asm-powerpc/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h similarity index 100% rename from include/asm-powerpc/mmu-8xx.h rename to arch/powerpc/include/asm/mmu-8xx.h diff --git a/include/asm-powerpc/mmu-fsl-booke.h b/arch/powerpc/include/asm/mmu-fsl-booke.h similarity index 100% rename from include/asm-powerpc/mmu-fsl-booke.h rename to arch/powerpc/include/asm/mmu-fsl-booke.h diff --git a/include/asm-powerpc/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h similarity index 100% rename from include/asm-powerpc/mmu-hash32.h rename to arch/powerpc/include/asm/mmu-hash32.h diff --git a/include/asm-powerpc/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h similarity index 100% rename from include/asm-powerpc/mmu-hash64.h rename to arch/powerpc/include/asm/mmu-hash64.h diff --git a/include/asm-powerpc/mmu.h b/arch/powerpc/include/asm/mmu.h similarity index 100% rename from include/asm-powerpc/mmu.h rename to arch/powerpc/include/asm/mmu.h diff --git a/include/asm-powerpc/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h similarity index 100% rename from include/asm-powerpc/mmu_context.h rename to arch/powerpc/include/asm/mmu_context.h diff --git a/include/asm-powerpc/mmzone.h b/arch/powerpc/include/asm/mmzone.h similarity index 100% rename from include/asm-powerpc/mmzone.h rename to arch/powerpc/include/asm/mmzone.h diff --git a/include/asm-powerpc/module.h b/arch/powerpc/include/asm/module.h similarity index 100% rename from include/asm-powerpc/module.h rename to arch/powerpc/include/asm/module.h diff --git a/include/asm-powerpc/mpc512x.h b/arch/powerpc/include/asm/mpc512x.h similarity index 100% rename from include/asm-powerpc/mpc512x.h rename to arch/powerpc/include/asm/mpc512x.h diff --git a/include/asm-powerpc/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h similarity index 100% rename from include/asm-powerpc/mpc52xx.h rename to arch/powerpc/include/asm/mpc52xx.h diff --git a/include/asm-powerpc/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h similarity index 100% rename from include/asm-powerpc/mpc52xx_psc.h rename to arch/powerpc/include/asm/mpc52xx_psc.h diff --git a/include/asm-powerpc/mpc6xx.h b/arch/powerpc/include/asm/mpc6xx.h similarity index 100% rename from include/asm-powerpc/mpc6xx.h rename to arch/powerpc/include/asm/mpc6xx.h diff --git a/include/asm-powerpc/mpc8260.h b/arch/powerpc/include/asm/mpc8260.h similarity index 100% rename from include/asm-powerpc/mpc8260.h rename to arch/powerpc/include/asm/mpc8260.h diff --git a/include/asm-powerpc/mpc86xx.h b/arch/powerpc/include/asm/mpc86xx.h similarity index 100% rename from include/asm-powerpc/mpc86xx.h rename to arch/powerpc/include/asm/mpc86xx.h diff --git a/include/asm-powerpc/mpc8xx.h b/arch/powerpc/include/asm/mpc8xx.h similarity index 100% rename from include/asm-powerpc/mpc8xx.h rename to arch/powerpc/include/asm/mpc8xx.h diff --git a/include/asm-powerpc/mpic.h b/arch/powerpc/include/asm/mpic.h similarity index 100% rename from include/asm-powerpc/mpic.h rename to arch/powerpc/include/asm/mpic.h diff --git a/include/asm-powerpc/msgbuf.h b/arch/powerpc/include/asm/msgbuf.h similarity index 100% rename from include/asm-powerpc/msgbuf.h rename to arch/powerpc/include/asm/msgbuf.h diff --git a/include/asm-powerpc/mutex.h b/arch/powerpc/include/asm/mutex.h similarity index 100% rename from include/asm-powerpc/mutex.h rename to arch/powerpc/include/asm/mutex.h diff --git a/include/asm-powerpc/nvram.h b/arch/powerpc/include/asm/nvram.h similarity index 100% rename from include/asm-powerpc/nvram.h rename to arch/powerpc/include/asm/nvram.h diff --git a/include/asm-powerpc/of_device.h b/arch/powerpc/include/asm/of_device.h similarity index 100% rename from include/asm-powerpc/of_device.h rename to arch/powerpc/include/asm/of_device.h diff --git a/include/asm-powerpc/of_platform.h b/arch/powerpc/include/asm/of_platform.h similarity index 100% rename from include/asm-powerpc/of_platform.h rename to arch/powerpc/include/asm/of_platform.h diff --git a/include/asm-powerpc/ohare.h b/arch/powerpc/include/asm/ohare.h similarity index 100% rename from include/asm-powerpc/ohare.h rename to arch/powerpc/include/asm/ohare.h diff --git a/include/asm-powerpc/oprofile_impl.h b/arch/powerpc/include/asm/oprofile_impl.h similarity index 100% rename from include/asm-powerpc/oprofile_impl.h rename to arch/powerpc/include/asm/oprofile_impl.h diff --git a/include/asm-powerpc/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h similarity index 100% rename from include/asm-powerpc/pSeries_reconfig.h rename to arch/powerpc/include/asm/pSeries_reconfig.h diff --git a/include/asm-powerpc/paca.h b/arch/powerpc/include/asm/paca.h similarity index 99% rename from include/asm-powerpc/paca.h rename to arch/powerpc/include/asm/paca.h index 7b564444ff6..6493a395508 100644 --- a/include/asm-powerpc/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -1,6 +1,4 @@ /* - * include/asm-powerpc/paca.h - * * This control block defines the PACA which defines the processor * specific data for each logical processor on the system. * There are some pointers defined that are utilized by PLIC. diff --git a/include/asm-powerpc/page.h b/arch/powerpc/include/asm/page.h similarity index 100% rename from include/asm-powerpc/page.h rename to arch/powerpc/include/asm/page.h diff --git a/include/asm-powerpc/page_32.h b/arch/powerpc/include/asm/page_32.h similarity index 100% rename from include/asm-powerpc/page_32.h rename to arch/powerpc/include/asm/page_32.h diff --git a/include/asm-powerpc/page_64.h b/arch/powerpc/include/asm/page_64.h similarity index 100% rename from include/asm-powerpc/page_64.h rename to arch/powerpc/include/asm/page_64.h diff --git a/include/asm-powerpc/param.h b/arch/powerpc/include/asm/param.h similarity index 100% rename from include/asm-powerpc/param.h rename to arch/powerpc/include/asm/param.h diff --git a/include/asm-powerpc/parport.h b/arch/powerpc/include/asm/parport.h similarity index 100% rename from include/asm-powerpc/parport.h rename to arch/powerpc/include/asm/parport.h diff --git a/include/asm-powerpc/pasemi_dma.h b/arch/powerpc/include/asm/pasemi_dma.h similarity index 100% rename from include/asm-powerpc/pasemi_dma.h rename to arch/powerpc/include/asm/pasemi_dma.h diff --git a/include/asm-powerpc/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h similarity index 100% rename from include/asm-powerpc/pci-bridge.h rename to arch/powerpc/include/asm/pci-bridge.h diff --git a/include/asm-powerpc/pci.h b/arch/powerpc/include/asm/pci.h similarity index 100% rename from include/asm-powerpc/pci.h rename to arch/powerpc/include/asm/pci.h diff --git a/include/asm-powerpc/percpu.h b/arch/powerpc/include/asm/percpu.h similarity index 100% rename from include/asm-powerpc/percpu.h rename to arch/powerpc/include/asm/percpu.h diff --git a/include/asm-powerpc/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h similarity index 100% rename from include/asm-powerpc/pgalloc-32.h rename to arch/powerpc/include/asm/pgalloc-32.h diff --git a/include/asm-powerpc/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h similarity index 100% rename from include/asm-powerpc/pgalloc-64.h rename to arch/powerpc/include/asm/pgalloc-64.h diff --git a/include/asm-powerpc/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h similarity index 100% rename from include/asm-powerpc/pgalloc.h rename to arch/powerpc/include/asm/pgalloc.h diff --git a/include/asm-powerpc/pgtable-4k.h b/arch/powerpc/include/asm/pgtable-4k.h similarity index 100% rename from include/asm-powerpc/pgtable-4k.h rename to arch/powerpc/include/asm/pgtable-4k.h diff --git a/include/asm-powerpc/pgtable-64k.h b/arch/powerpc/include/asm/pgtable-64k.h similarity index 100% rename from include/asm-powerpc/pgtable-64k.h rename to arch/powerpc/include/asm/pgtable-64k.h diff --git a/include/asm-powerpc/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h similarity index 100% rename from include/asm-powerpc/pgtable-ppc32.h rename to arch/powerpc/include/asm/pgtable-ppc32.h diff --git a/include/asm-powerpc/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h similarity index 99% rename from include/asm-powerpc/pgtable-ppc64.h rename to arch/powerpc/include/asm/pgtable-ppc64.h index 74c6f380b80..db0b8f3b880 100644 --- a/include/asm-powerpc/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -100,7 +100,7 @@ #define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY) -/* __pgprot defined in asm-powerpc/page.h */ +/* __pgprot defined in arch/powerpc/incliude/asm/page.h */ #define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED) #define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER) diff --git a/include/asm-powerpc/pgtable.h b/arch/powerpc/include/asm/pgtable.h similarity index 100% rename from include/asm-powerpc/pgtable.h rename to arch/powerpc/include/asm/pgtable.h diff --git a/include/asm-powerpc/phyp_dump.h b/arch/powerpc/include/asm/phyp_dump.h similarity index 100% rename from include/asm-powerpc/phyp_dump.h rename to arch/powerpc/include/asm/phyp_dump.h diff --git a/include/asm-powerpc/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h similarity index 100% rename from include/asm-powerpc/pmac_feature.h rename to arch/powerpc/include/asm/pmac_feature.h diff --git a/include/asm-powerpc/pmac_low_i2c.h b/arch/powerpc/include/asm/pmac_low_i2c.h similarity index 100% rename from include/asm-powerpc/pmac_low_i2c.h rename to arch/powerpc/include/asm/pmac_low_i2c.h diff --git a/include/asm-powerpc/pmac_pfunc.h b/arch/powerpc/include/asm/pmac_pfunc.h similarity index 100% rename from include/asm-powerpc/pmac_pfunc.h rename to arch/powerpc/include/asm/pmac_pfunc.h diff --git a/include/asm-powerpc/pmc.h b/arch/powerpc/include/asm/pmc.h similarity index 100% rename from include/asm-powerpc/pmc.h rename to arch/powerpc/include/asm/pmc.h diff --git a/include/asm-powerpc/pmi.h b/arch/powerpc/include/asm/pmi.h similarity index 100% rename from include/asm-powerpc/pmi.h rename to arch/powerpc/include/asm/pmi.h diff --git a/include/asm-powerpc/poll.h b/arch/powerpc/include/asm/poll.h similarity index 100% rename from include/asm-powerpc/poll.h rename to arch/powerpc/include/asm/poll.h diff --git a/include/asm-powerpc/posix_types.h b/arch/powerpc/include/asm/posix_types.h similarity index 100% rename from include/asm-powerpc/posix_types.h rename to arch/powerpc/include/asm/posix_types.h diff --git a/include/asm-powerpc/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h similarity index 100% rename from include/asm-powerpc/ppc-pci.h rename to arch/powerpc/include/asm/ppc-pci.h diff --git a/include/asm-powerpc/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h similarity index 100% rename from include/asm-powerpc/ppc4xx.h rename to arch/powerpc/include/asm/ppc4xx.h diff --git a/include/asm-powerpc/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h similarity index 100% rename from include/asm-powerpc/ppc_asm.h rename to arch/powerpc/include/asm/ppc_asm.h diff --git a/include/asm-powerpc/processor.h b/arch/powerpc/include/asm/processor.h similarity index 100% rename from include/asm-powerpc/processor.h rename to arch/powerpc/include/asm/processor.h diff --git a/include/asm-powerpc/prom.h b/arch/powerpc/include/asm/prom.h similarity index 100% rename from include/asm-powerpc/prom.h rename to arch/powerpc/include/asm/prom.h diff --git a/include/asm-powerpc/ps3.h b/arch/powerpc/include/asm/ps3.h similarity index 100% rename from include/asm-powerpc/ps3.h rename to arch/powerpc/include/asm/ps3.h diff --git a/include/asm-powerpc/ps3av.h b/arch/powerpc/include/asm/ps3av.h similarity index 100% rename from include/asm-powerpc/ps3av.h rename to arch/powerpc/include/asm/ps3av.h diff --git a/include/asm-powerpc/ps3fb.h b/arch/powerpc/include/asm/ps3fb.h similarity index 100% rename from include/asm-powerpc/ps3fb.h rename to arch/powerpc/include/asm/ps3fb.h diff --git a/include/asm-powerpc/ps3stor.h b/arch/powerpc/include/asm/ps3stor.h similarity index 100% rename from include/asm-powerpc/ps3stor.h rename to arch/powerpc/include/asm/ps3stor.h diff --git a/include/asm-powerpc/ptrace.h b/arch/powerpc/include/asm/ptrace.h similarity index 100% rename from include/asm-powerpc/ptrace.h rename to arch/powerpc/include/asm/ptrace.h diff --git a/include/asm-powerpc/qe.h b/arch/powerpc/include/asm/qe.h similarity index 100% rename from include/asm-powerpc/qe.h rename to arch/powerpc/include/asm/qe.h diff --git a/include/asm-powerpc/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h similarity index 99% rename from include/asm-powerpc/qe_ic.h rename to arch/powerpc/include/asm/qe_ic.h index a779b2c9eaf..56a7745ca34 100644 --- a/include/asm-powerpc/qe_ic.h +++ b/arch/powerpc/include/asm/qe_ic.h @@ -1,6 +1,4 @@ /* - * include/asm-powerpc/qe_ic.h - * * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. * * Authors: Shlomi Gridish diff --git a/include/asm-powerpc/reg.h b/arch/powerpc/include/asm/reg.h similarity index 100% rename from include/asm-powerpc/reg.h rename to arch/powerpc/include/asm/reg.h diff --git a/include/asm-powerpc/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h similarity index 100% rename from include/asm-powerpc/reg_8xx.h rename to arch/powerpc/include/asm/reg_8xx.h diff --git a/include/asm-powerpc/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h similarity index 100% rename from include/asm-powerpc/reg_booke.h rename to arch/powerpc/include/asm/reg_booke.h diff --git a/include/asm-powerpc/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h similarity index 100% rename from include/asm-powerpc/reg_fsl_emb.h rename to arch/powerpc/include/asm/reg_fsl_emb.h diff --git a/include/asm-powerpc/resource.h b/arch/powerpc/include/asm/resource.h similarity index 100% rename from include/asm-powerpc/resource.h rename to arch/powerpc/include/asm/resource.h diff --git a/include/asm-powerpc/rheap.h b/arch/powerpc/include/asm/rheap.h similarity index 100% rename from include/asm-powerpc/rheap.h rename to arch/powerpc/include/asm/rheap.h diff --git a/include/asm-powerpc/rio.h b/arch/powerpc/include/asm/rio.h similarity index 100% rename from include/asm-powerpc/rio.h rename to arch/powerpc/include/asm/rio.h diff --git a/include/asm-powerpc/rtas.h b/arch/powerpc/include/asm/rtas.h similarity index 100% rename from include/asm-powerpc/rtas.h rename to arch/powerpc/include/asm/rtas.h diff --git a/include/asm-powerpc/rtc.h b/arch/powerpc/include/asm/rtc.h similarity index 100% rename from include/asm-powerpc/rtc.h rename to arch/powerpc/include/asm/rtc.h diff --git a/include/asm-powerpc/rwsem.h b/arch/powerpc/include/asm/rwsem.h similarity index 96% rename from include/asm-powerpc/rwsem.h rename to arch/powerpc/include/asm/rwsem.h index a6cc93b78b9..24cd9281ec3 100644 --- a/include/asm-powerpc/rwsem.h +++ b/arch/powerpc/include/asm/rwsem.h @@ -8,8 +8,8 @@ #ifdef __KERNEL__ /* - * include/asm-powerpc/rwsem.h: R/W semaphores for PPC using the stuff - * in lib/rwsem.c. Adapted largely from include/asm-i386/rwsem.h + * R/W semaphores for PPC using the stuff in lib/rwsem.c. + * Adapted largely from include/asm-i386/rwsem.h * by Paul Mackerras . */ diff --git a/include/asm-powerpc/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h similarity index 100% rename from include/asm-powerpc/scatterlist.h rename to arch/powerpc/include/asm/scatterlist.h diff --git a/include/asm-powerpc/seccomp.h b/arch/powerpc/include/asm/seccomp.h similarity index 100% rename from include/asm-powerpc/seccomp.h rename to arch/powerpc/include/asm/seccomp.h diff --git a/include/asm-powerpc/sections.h b/arch/powerpc/include/asm/sections.h similarity index 100% rename from include/asm-powerpc/sections.h rename to arch/powerpc/include/asm/sections.h diff --git a/include/asm-powerpc/sembuf.h b/arch/powerpc/include/asm/sembuf.h similarity index 100% rename from include/asm-powerpc/sembuf.h rename to arch/powerpc/include/asm/sembuf.h diff --git a/include/asm-powerpc/serial.h b/arch/powerpc/include/asm/serial.h similarity index 100% rename from include/asm-powerpc/serial.h rename to arch/powerpc/include/asm/serial.h diff --git a/include/asm-powerpc/setjmp.h b/arch/powerpc/include/asm/setjmp.h similarity index 100% rename from include/asm-powerpc/setjmp.h rename to arch/powerpc/include/asm/setjmp.h diff --git a/include/asm-powerpc/setup.h b/arch/powerpc/include/asm/setup.h similarity index 100% rename from include/asm-powerpc/setup.h rename to arch/powerpc/include/asm/setup.h diff --git a/include/asm-powerpc/shmbuf.h b/arch/powerpc/include/asm/shmbuf.h similarity index 100% rename from include/asm-powerpc/shmbuf.h rename to arch/powerpc/include/asm/shmbuf.h diff --git a/include/asm-powerpc/shmparam.h b/arch/powerpc/include/asm/shmparam.h similarity index 100% rename from include/asm-powerpc/shmparam.h rename to arch/powerpc/include/asm/shmparam.h diff --git a/include/asm-powerpc/sigcontext.h b/arch/powerpc/include/asm/sigcontext.h similarity index 100% rename from include/asm-powerpc/sigcontext.h rename to arch/powerpc/include/asm/sigcontext.h diff --git a/include/asm-powerpc/siginfo.h b/arch/powerpc/include/asm/siginfo.h similarity index 100% rename from include/asm-powerpc/siginfo.h rename to arch/powerpc/include/asm/siginfo.h diff --git a/include/asm-powerpc/signal.h b/arch/powerpc/include/asm/signal.h similarity index 100% rename from include/asm-powerpc/signal.h rename to arch/powerpc/include/asm/signal.h diff --git a/include/asm-powerpc/smp.h b/arch/powerpc/include/asm/smp.h similarity index 100% rename from include/asm-powerpc/smp.h rename to arch/powerpc/include/asm/smp.h diff --git a/include/asm-powerpc/smu.h b/arch/powerpc/include/asm/smu.h similarity index 100% rename from include/asm-powerpc/smu.h rename to arch/powerpc/include/asm/smu.h diff --git a/include/asm-powerpc/socket.h b/arch/powerpc/include/asm/socket.h similarity index 100% rename from include/asm-powerpc/socket.h rename to arch/powerpc/include/asm/socket.h diff --git a/include/asm-powerpc/sockios.h b/arch/powerpc/include/asm/sockios.h similarity index 100% rename from include/asm-powerpc/sockios.h rename to arch/powerpc/include/asm/sockios.h diff --git a/include/asm-powerpc/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h similarity index 100% rename from include/asm-powerpc/sparsemem.h rename to arch/powerpc/include/asm/sparsemem.h diff --git a/include/asm-powerpc/spinlock.h b/arch/powerpc/include/asm/spinlock.h similarity index 100% rename from include/asm-powerpc/spinlock.h rename to arch/powerpc/include/asm/spinlock.h diff --git a/include/asm-powerpc/spinlock_types.h b/arch/powerpc/include/asm/spinlock_types.h similarity index 100% rename from include/asm-powerpc/spinlock_types.h rename to arch/powerpc/include/asm/spinlock_types.h diff --git a/include/asm-powerpc/spu.h b/arch/powerpc/include/asm/spu.h similarity index 100% rename from include/asm-powerpc/spu.h rename to arch/powerpc/include/asm/spu.h diff --git a/include/asm-powerpc/spu_csa.h b/arch/powerpc/include/asm/spu_csa.h similarity index 100% rename from include/asm-powerpc/spu_csa.h rename to arch/powerpc/include/asm/spu_csa.h diff --git a/include/asm-powerpc/spu_info.h b/arch/powerpc/include/asm/spu_info.h similarity index 100% rename from include/asm-powerpc/spu_info.h rename to arch/powerpc/include/asm/spu_info.h diff --git a/include/asm-powerpc/spu_priv1.h b/arch/powerpc/include/asm/spu_priv1.h similarity index 100% rename from include/asm-powerpc/spu_priv1.h rename to arch/powerpc/include/asm/spu_priv1.h diff --git a/include/asm-powerpc/sstep.h b/arch/powerpc/include/asm/sstep.h similarity index 100% rename from include/asm-powerpc/sstep.h rename to arch/powerpc/include/asm/sstep.h diff --git a/include/asm-powerpc/stat.h b/arch/powerpc/include/asm/stat.h similarity index 100% rename from include/asm-powerpc/stat.h rename to arch/powerpc/include/asm/stat.h diff --git a/include/asm-powerpc/statfs.h b/arch/powerpc/include/asm/statfs.h similarity index 100% rename from include/asm-powerpc/statfs.h rename to arch/powerpc/include/asm/statfs.h diff --git a/include/asm-powerpc/string.h b/arch/powerpc/include/asm/string.h similarity index 100% rename from include/asm-powerpc/string.h rename to arch/powerpc/include/asm/string.h diff --git a/include/asm-powerpc/suspend.h b/arch/powerpc/include/asm/suspend.h similarity index 100% rename from include/asm-powerpc/suspend.h rename to arch/powerpc/include/asm/suspend.h diff --git a/include/asm-powerpc/synch.h b/arch/powerpc/include/asm/synch.h similarity index 100% rename from include/asm-powerpc/synch.h rename to arch/powerpc/include/asm/synch.h diff --git a/include/asm-powerpc/syscall.h b/arch/powerpc/include/asm/syscall.h similarity index 100% rename from include/asm-powerpc/syscall.h rename to arch/powerpc/include/asm/syscall.h diff --git a/include/asm-powerpc/syscalls.h b/arch/powerpc/include/asm/syscalls.h similarity index 100% rename from include/asm-powerpc/syscalls.h rename to arch/powerpc/include/asm/syscalls.h diff --git a/include/asm-powerpc/systbl.h b/arch/powerpc/include/asm/systbl.h similarity index 100% rename from include/asm-powerpc/systbl.h rename to arch/powerpc/include/asm/systbl.h diff --git a/include/asm-powerpc/system.h b/arch/powerpc/include/asm/system.h similarity index 100% rename from include/asm-powerpc/system.h rename to arch/powerpc/include/asm/system.h diff --git a/include/asm-powerpc/tce.h b/arch/powerpc/include/asm/tce.h similarity index 100% rename from include/asm-powerpc/tce.h rename to arch/powerpc/include/asm/tce.h diff --git a/include/asm-powerpc/termbits.h b/arch/powerpc/include/asm/termbits.h similarity index 100% rename from include/asm-powerpc/termbits.h rename to arch/powerpc/include/asm/termbits.h diff --git a/include/asm-powerpc/termios.h b/arch/powerpc/include/asm/termios.h similarity index 100% rename from include/asm-powerpc/termios.h rename to arch/powerpc/include/asm/termios.h diff --git a/include/asm-powerpc/thread_info.h b/arch/powerpc/include/asm/thread_info.h similarity index 100% rename from include/asm-powerpc/thread_info.h rename to arch/powerpc/include/asm/thread_info.h diff --git a/include/asm-powerpc/time.h b/arch/powerpc/include/asm/time.h similarity index 100% rename from include/asm-powerpc/time.h rename to arch/powerpc/include/asm/time.h diff --git a/include/asm-powerpc/timex.h b/arch/powerpc/include/asm/timex.h similarity index 100% rename from include/asm-powerpc/timex.h rename to arch/powerpc/include/asm/timex.h diff --git a/include/asm-powerpc/tlb.h b/arch/powerpc/include/asm/tlb.h similarity index 100% rename from include/asm-powerpc/tlb.h rename to arch/powerpc/include/asm/tlb.h diff --git a/include/asm-powerpc/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h similarity index 100% rename from include/asm-powerpc/tlbflush.h rename to arch/powerpc/include/asm/tlbflush.h diff --git a/include/asm-powerpc/topology.h b/arch/powerpc/include/asm/topology.h similarity index 100% rename from include/asm-powerpc/topology.h rename to arch/powerpc/include/asm/topology.h diff --git a/include/asm-powerpc/tsi108.h b/arch/powerpc/include/asm/tsi108.h similarity index 100% rename from include/asm-powerpc/tsi108.h rename to arch/powerpc/include/asm/tsi108.h diff --git a/include/asm-powerpc/tsi108_irq.h b/arch/powerpc/include/asm/tsi108_irq.h similarity index 100% rename from include/asm-powerpc/tsi108_irq.h rename to arch/powerpc/include/asm/tsi108_irq.h diff --git a/include/asm-powerpc/tsi108_pci.h b/arch/powerpc/include/asm/tsi108_pci.h similarity index 100% rename from include/asm-powerpc/tsi108_pci.h rename to arch/powerpc/include/asm/tsi108_pci.h diff --git a/include/asm-powerpc/types.h b/arch/powerpc/include/asm/types.h similarity index 100% rename from include/asm-powerpc/types.h rename to arch/powerpc/include/asm/types.h diff --git a/include/asm-powerpc/uaccess.h b/arch/powerpc/include/asm/uaccess.h similarity index 100% rename from include/asm-powerpc/uaccess.h rename to arch/powerpc/include/asm/uaccess.h diff --git a/include/asm-powerpc/ucc.h b/arch/powerpc/include/asm/ucc.h similarity index 100% rename from include/asm-powerpc/ucc.h rename to arch/powerpc/include/asm/ucc.h diff --git a/include/asm-powerpc/ucc_fast.h b/arch/powerpc/include/asm/ucc_fast.h similarity index 99% rename from include/asm-powerpc/ucc_fast.h rename to arch/powerpc/include/asm/ucc_fast.h index fce16abe7ee..839aab8bf37 100644 --- a/include/asm-powerpc/ucc_fast.h +++ b/arch/powerpc/include/asm/ucc_fast.h @@ -1,6 +1,4 @@ /* - * include/asm-powerpc/ucc_fast.h - * * Internal header file for UCC FAST unit routines. * * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. diff --git a/include/asm-powerpc/ucc_slow.h b/arch/powerpc/include/asm/ucc_slow.h similarity index 100% rename from include/asm-powerpc/ucc_slow.h rename to arch/powerpc/include/asm/ucc_slow.h diff --git a/include/asm-powerpc/ucontext.h b/arch/powerpc/include/asm/ucontext.h similarity index 100% rename from include/asm-powerpc/ucontext.h rename to arch/powerpc/include/asm/ucontext.h diff --git a/include/asm-powerpc/udbg.h b/arch/powerpc/include/asm/udbg.h similarity index 100% rename from include/asm-powerpc/udbg.h rename to arch/powerpc/include/asm/udbg.h diff --git a/include/asm-powerpc/uic.h b/arch/powerpc/include/asm/uic.h similarity index 95% rename from include/asm-powerpc/uic.h rename to arch/powerpc/include/asm/uic.h index 970eb7e2186..597edfcae3d 100644 --- a/include/asm-powerpc/uic.h +++ b/arch/powerpc/include/asm/uic.h @@ -1,6 +1,4 @@ /* - * include/asm-powerpc/uic.h - * * IBM PPC4xx UIC external definitions and structure. * * Maintainer: David Gibson diff --git a/include/asm-powerpc/unaligned.h b/arch/powerpc/include/asm/unaligned.h similarity index 100% rename from include/asm-powerpc/unaligned.h rename to arch/powerpc/include/asm/unaligned.h diff --git a/include/asm-powerpc/uninorth.h b/arch/powerpc/include/asm/uninorth.h similarity index 100% rename from include/asm-powerpc/uninorth.h rename to arch/powerpc/include/asm/uninorth.h diff --git a/include/asm-powerpc/unistd.h b/arch/powerpc/include/asm/unistd.h similarity index 100% rename from include/asm-powerpc/unistd.h rename to arch/powerpc/include/asm/unistd.h diff --git a/include/asm-powerpc/user.h b/arch/powerpc/include/asm/user.h similarity index 100% rename from include/asm-powerpc/user.h rename to arch/powerpc/include/asm/user.h diff --git a/include/asm-powerpc/vdso.h b/arch/powerpc/include/asm/vdso.h similarity index 100% rename from include/asm-powerpc/vdso.h rename to arch/powerpc/include/asm/vdso.h diff --git a/include/asm-powerpc/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h similarity index 100% rename from include/asm-powerpc/vdso_datapage.h rename to arch/powerpc/include/asm/vdso_datapage.h diff --git a/include/asm-powerpc/vga.h b/arch/powerpc/include/asm/vga.h similarity index 100% rename from include/asm-powerpc/vga.h rename to arch/powerpc/include/asm/vga.h diff --git a/include/asm-powerpc/vio.h b/arch/powerpc/include/asm/vio.h similarity index 100% rename from include/asm-powerpc/vio.h rename to arch/powerpc/include/asm/vio.h diff --git a/include/asm-powerpc/xilinx_intc.h b/arch/powerpc/include/asm/xilinx_intc.h similarity index 100% rename from include/asm-powerpc/xilinx_intc.h rename to arch/powerpc/include/asm/xilinx_intc.h diff --git a/include/asm-powerpc/xmon.h b/arch/powerpc/include/asm/xmon.h similarity index 100% rename from include/asm-powerpc/xmon.h rename to arch/powerpc/include/asm/xmon.h diff --git a/include/asm-powerpc/xor.h b/arch/powerpc/include/asm/xor.h similarity index 100% rename from include/asm-powerpc/xor.h rename to arch/powerpc/include/asm/xor.h diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c index 409fcc7b63c..be7dd422c0f 100644 --- a/arch/powerpc/mm/tlb_64.c +++ b/arch/powerpc/mm/tlb_64.c @@ -34,7 +34,7 @@ DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); /* This is declared as we are using the more or less generic - * include/asm-powerpc/tlb.h file -- tgall + * arch/powerpc/include/asm/tlb.h file -- tgall */ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur); diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c index 835f2dc24dc..014e26cda08 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h index d9ce1091562..9790201718a 100644 --- a/drivers/char/hvc_console.h +++ b/drivers/char/hvc_console.h @@ -6,7 +6,7 @@ * Ryan S. Arnold * * hvc_console header information: - * moved here from include/asm-powerpc/hvconsole.h + * moved here from arch/powerpc/include/asm/hvconsole.h * and drivers/char/hvc_console.c * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/char/hvcs.c b/drivers/char/hvcs.c index 786d518e947..473d9b14439 100644 --- a/drivers/char/hvcs.c +++ b/drivers/char/hvcs.c @@ -114,7 +114,7 @@ * the hvcs_final_close() function in order to get it out of the spinlock. * Rearranged hvcs_close(). Cleaned up some printks and did some housekeeping * on the changelog. Removed local CLC_LENGTH and used HVCS_CLC_LENGTH from - * include/asm-powerpc/hvcserver.h + * arch/powerepc/include/asm/hvcserver.h * * 1.3.2 -> 1.3.3 Replaced yield() in hvcs_close() with tty_wait_until_sent() to * prevent possible lockup with realtime scheduling as similarily pointed out by diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index dd9bc68f1c7..898c8b5c38d 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -42,7 +42,7 @@ */ -#include +#include #include "ehca_classes.h" #include "ehca_tools.h" #include "ehca_qes.h" -- GitLab From 93d0ec851820688ef5b21a84e7460d3cf405f5c5 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 2 Aug 2008 08:00:48 -0400 Subject: [PATCH 0666/1024] remove locking around tcpSesAllocCount atomic variable The global tcpSesAllocCount variable is an atomic already and doesn't really need the extra locking around it. Remove the locking and just use the atomic_inc_return and atomic_dec_return functions to make sure we access it correctly. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index b51d5777cde..34a1fc9dabf 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -351,11 +351,9 @@ cifs_demultiplex_thread(struct TCP_Server_Info *server) current->flags |= PF_MEMALLOC; cFYI(1, ("Demultiplex PID: %d", task_pid_nr(current))); - write_lock(&GlobalSMBSeslock); - atomic_inc(&tcpSesAllocCount); - length = tcpSesAllocCount.counter; - write_unlock(&GlobalSMBSeslock); - if (length > 1) + + length = atomic_inc_return(&tcpSesAllocCount); + if (length > 1) mempool_resize(cifs_req_poolp, length + cifs_min_rcv, GFP_KERNEL); @@ -745,14 +743,11 @@ multi_t2_fnd: coming home not much else we can do but free the memory */ } - write_lock(&GlobalSMBSeslock); - atomic_dec(&tcpSesAllocCount); - length = tcpSesAllocCount.counter; - /* last chance to mark ses pointers invalid if there are any pointing to this (e.g if a crazy root user tried to kill cifsd kernel thread explicitly this might happen) */ + write_lock(&GlobalSMBSeslock); list_for_each(tmp, &GlobalSMBSessionList) { ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList); @@ -763,6 +758,8 @@ multi_t2_fnd: kfree(server->hostname); kfree(server); + + length = atomic_dec_return(&tcpSesAllocCount); if (length > 0) mempool_resize(cifs_req_poolp, length + cifs_min_rcv, GFP_KERNEL); -- GitLab From fb61063587982b52304d62cdbb6a0a88d26ae7ef Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Thu, 31 Jul 2008 13:51:42 +1000 Subject: [PATCH 0667/1024] powerpc: Fix compiler warning in arch/powerpc/mm/mem.c Explicitly cast to unsigned long long, rather than u64. Signed-off-by: Tony Breeds Signed-off-by: Paul Mackerras --- arch/powerpc/mm/mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 702691cb9e8..1c93c255873 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -311,7 +311,7 @@ void __init paging_init(void) #endif /* CONFIG_HIGHMEM */ printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%lx\n", - (u64)top_of_ram, total_ram); + (unsigned long long)top_of_ram, total_ram); printk(KERN_DEBUG "Memory hole size: %ldMB\n", (long int)((top_of_ram - total_ram) >> 20)); memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); -- GitLab From c7c8eede2739289df02a1ab297cc476c6f38dca7 Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Fri, 1 Aug 2008 11:38:39 +1000 Subject: [PATCH 0668/1024] powerpc: Force printing of 'total_memory' to unsigned long long total_memory is a 'phys_addr_t', Which can be either 64 or 32 bits. Force printing as unsigned long long to silence the warning. Signed-off-by: Tony Breeds Signed-off-by: Paul Mackerras --- arch/powerpc/mm/ppc_mmu_32.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index c53145f6194..6aa12081377 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -236,8 +236,8 @@ void __init MMU_init_hw(void) Hash_end = (struct hash_pte *) ((unsigned long)Hash + Hash_size); - printk("Total memory = %ldMB; using %ldkB for hash table (at %p)\n", - total_memory >> 20, Hash_size >> 10, Hash); + printk("Total memory = %lldMB; using %ldkB for hash table (at %p)\n", + (unsigned long long)(total_memory >> 20), Hash_size >> 10, Hash); /* -- GitLab From 9c4cb82515130c62224e23fdf7c13c8f6c59c614 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 2 Aug 2008 02:44:11 +1000 Subject: [PATCH 0669/1024] powerpc: Remove use of CONFIG_PPC_MERGE Now that arch/ppc is gone and CONFIG_PPC_MERGE is always set, remove the dead code associated with !CONFIG_PPC_MERGE from arch/powerpc and include/asm-powerpc. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig.debug | 2 +- arch/powerpc/include/asm/dcr.h | 6 +- arch/powerpc/include/asm/i8259.h | 5 - arch/powerpc/include/asm/ipic.h | 7 - arch/powerpc/include/asm/irq.h | 288 ----------------------- arch/powerpc/kernel/Makefile | 14 -- arch/powerpc/kernel/cpu_setup_44x.S | 6 - arch/powerpc/kernel/irq.c | 25 +- arch/powerpc/kernel/process.c | 2 - arch/powerpc/kernel/vdso.c | 2 - arch/powerpc/lib/Makefile | 2 - arch/powerpc/platforms/52xx/Makefile | 4 +- arch/powerpc/platforms/Makefile | 6 - arch/powerpc/platforms/powermac/Makefile | 3 +- arch/powerpc/sysdev/Makefile | 2 - 15 files changed, 6 insertions(+), 368 deletions(-) diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 8c8aadbe956..4ebc52a19f0 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -97,7 +97,7 @@ config IRQSTACKS config VIRQ_DEBUG bool "Expose hardware/virtual IRQ mapping via debugfs" - depends on DEBUG_FS && PPC_MERGE + depends on DEBUG_FS help This option will show the mapping relationship between hardware irq numbers and virtual irq numbers. The mapping is exposed via debugfs diff --git a/arch/powerpc/include/asm/dcr.h b/arch/powerpc/include/asm/dcr.h index 53b283050ab..d13fb68bb5c 100644 --- a/arch/powerpc/include/asm/dcr.h +++ b/arch/powerpc/include/asm/dcr.h @@ -65,17 +65,13 @@ typedef dcr_host_mmio_t dcr_host_t; #endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */ /* - * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR - * base from the device-tree + * additional helpers to read the DCR * base from the device-tree */ -#ifdef CONFIG_PPC_MERGE struct device_node; extern unsigned int dcr_resource_start(struct device_node *np, unsigned int index); extern unsigned int dcr_resource_len(struct device_node *np, unsigned int index); -#endif /* CONFIG_PPC_MERGE */ - #endif /* CONFIG_PPC_DCR */ #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/i8259.h b/arch/powerpc/include/asm/i8259.h index db1362f8c60..105ade297aa 100644 --- a/arch/powerpc/include/asm/i8259.h +++ b/arch/powerpc/include/asm/i8259.h @@ -4,14 +4,9 @@ #include -#ifdef CONFIG_PPC_MERGE extern void i8259_init(struct device_node *node, unsigned long intack_addr); extern unsigned int i8259_irq(void); extern struct irq_host *i8259_get_host(void); -#else -extern void i8259_init(unsigned long intack_addr, int offset); -extern int i8259_irq(void); -#endif #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_I8259_H */ diff --git a/arch/powerpc/include/asm/ipic.h b/arch/powerpc/include/asm/ipic.h index 4cf35531c0e..fb59829983b 100644 --- a/arch/powerpc/include/asm/ipic.h +++ b/arch/powerpc/include/asm/ipic.h @@ -77,15 +77,8 @@ extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq); extern u32 ipic_get_mcp_status(void); extern void ipic_clear_mcp_status(u32 mask); -#ifdef CONFIG_PPC_MERGE extern struct ipic * ipic_init(struct device_node *node, unsigned int flags); extern unsigned int ipic_get_irq(void); -#else -extern void ipic_init(phys_addr_t phys_addr, unsigned int flags, - unsigned int irq_offset, - unsigned char *senses, unsigned int senses_count); -extern int ipic_get_irq(void); -#endif #endif /* __ASM_IPIC_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index 1ef8e304e0e..a372f76836c 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -25,8 +25,6 @@ extern atomic_t ppc_n_lost_interrupts; -#ifdef CONFIG_PPC_MERGE - /* This number is used when no interrupt has been assigned */ #define NO_IRQ (0) @@ -326,292 +324,6 @@ static __inline__ int irq_canonicalize(int irq) return irq; } - -#else /* CONFIG_PPC_MERGE */ - -/* This number is used when no interrupt has been assigned */ -#define NO_IRQ (-1) -#define NO_IRQ_IGNORE (-2) - - -/* - * These constants are used for passing information about interrupt - * signal polarity and level/edge sensing to the low-level PIC chip - * drivers. - */ -#define IRQ_SENSE_MASK 0x1 -#define IRQ_SENSE_LEVEL 0x1 /* interrupt on active level */ -#define IRQ_SENSE_EDGE 0x0 /* interrupt triggered by edge */ - -#define IRQ_POLARITY_MASK 0x2 -#define IRQ_POLARITY_POSITIVE 0x2 /* high level or low->high edge */ -#define IRQ_POLARITY_NEGATIVE 0x0 /* low level or high->low edge */ - - -#if defined(CONFIG_40x) -#include - -#ifndef NR_BOARD_IRQS -#define NR_BOARD_IRQS 0 -#endif - -#ifndef UIC_WIDTH /* Number of interrupts per device */ -#define UIC_WIDTH 32 -#endif - -#ifndef NR_UICS /* number of UIC devices */ -#define NR_UICS 1 -#endif - -#if defined (CONFIG_403) -/* - * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has - * 32 possible interrupts, a majority of which are not implemented on - * all cores. There are six configurable, external interrupt pins and - * there are eight internal interrupts for the on-chip serial port - * (SPU), DMA controller, and JTAG controller. - * - */ - -#define NR_AIC_IRQS 32 -#define NR_IRQS (NR_AIC_IRQS + NR_BOARD_IRQS) - -#elif !defined (CONFIG_403) - -/* - * The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32 - * possible interrupts as well. There are seven, configurable external - * interrupt pins and there are 17 internal interrupts for the on-chip - * serial port, DMA controller, on-chip Ethernet controller, PCI, etc. - * - */ - - -#define NR_UIC_IRQS UIC_WIDTH -#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) -#endif - -#elif defined(CONFIG_44x) -#include - -#define NR_UIC_IRQS 32 -#define NR_IRQS ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS) - -#elif defined(CONFIG_8xx) - -/* Now include the board configuration specific associations. -*/ -#include - -/* The MPC8xx cores have 16 possible interrupts. There are eight - * possible level sensitive interrupts assigned and generated internally - * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer. - * There are eight external interrupts (IRQs) that can be configured - * as either level or edge sensitive. - * - * On some implementations, there is also the possibility of an 8259 - * through the PCI and PCI-ISA bridges. - * - * We are "flattening" the interrupt vectors of the cascaded CPM - * and 8259 interrupt controllers so that we can uniquely identify - * any interrupt source with a single integer. - */ -#define NR_SIU_INTS 16 -#define NR_CPM_INTS 32 -#ifndef NR_8259_INTS -#define NR_8259_INTS 0 -#endif - -#define SIU_IRQ_OFFSET 0 -#define CPM_IRQ_OFFSET (SIU_IRQ_OFFSET + NR_SIU_INTS) -#define I8259_IRQ_OFFSET (CPM_IRQ_OFFSET + NR_CPM_INTS) - -#define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS) - -/* These values must be zero-based and map 1:1 with the SIU configuration. - * They are used throughout the 8xx I/O subsystem to generate - * interrupt masks, flags, and other control patterns. This is why the - * current kernel assumption of the 8259 as the base controller is such - * a pain in the butt. - */ -#define SIU_IRQ0 (0) /* Highest priority */ -#define SIU_LEVEL0 (1) -#define SIU_IRQ1 (2) -#define SIU_LEVEL1 (3) -#define SIU_IRQ2 (4) -#define SIU_LEVEL2 (5) -#define SIU_IRQ3 (6) -#define SIU_LEVEL3 (7) -#define SIU_IRQ4 (8) -#define SIU_LEVEL4 (9) -#define SIU_IRQ5 (10) -#define SIU_LEVEL5 (11) -#define SIU_IRQ6 (12) -#define SIU_LEVEL6 (13) -#define SIU_IRQ7 (14) -#define SIU_LEVEL7 (15) - -#define MPC8xx_INT_FEC1 SIU_LEVEL1 -#define MPC8xx_INT_FEC2 SIU_LEVEL3 - -#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1) -#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2) -#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3) -#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4) -#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1) -#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2) - -/* The internal interrupts we can configure as we see fit. - * My personal preference is CPM at level 2, which puts it above the - * MBX PCI/ISA/IDE interrupts. - */ -#ifndef PIT_INTERRUPT -#define PIT_INTERRUPT SIU_LEVEL0 -#endif -#ifndef CPM_INTERRUPT -#define CPM_INTERRUPT SIU_LEVEL2 -#endif -#ifndef PCMCIA_INTERRUPT -#define PCMCIA_INTERRUPT SIU_LEVEL6 -#endif -#ifndef DEC_INTERRUPT -#define DEC_INTERRUPT SIU_LEVEL7 -#endif - -/* Some internal interrupt registers use an 8-bit mask for the interrupt - * level instead of a number. - */ -#define mk_int_int_mask(IL) (1 << (7 - (IL/2))) - -#else /* CONFIG_40x + CONFIG_8xx */ -/* - * this is the # irq's for all ppc arch's (pmac/chrp/prep) - * so it is the max of them all - */ -#define NR_IRQS 256 -#define __DO_IRQ_CANON 1 - -#ifndef CONFIG_8260 - -#define NUM_8259_INTERRUPTS 16 - -#else /* CONFIG_8260 */ - -/* The 8260 has an internal interrupt controller with a maximum of - * 64 IRQs. We will use NR_IRQs from above since it is large enough. - * Don't be confused by the 8260 documentation where they list an - * "interrupt number" and "interrupt vector". We are only interested - * in the interrupt vector. There are "reserved" holes where the - * vector number increases, but the interrupt number in the table does not. - * (Document errata updates have fixed this...make sure you have up to - * date processor documentation -- Dan). - */ - -#ifndef CPM_IRQ_OFFSET -#define CPM_IRQ_OFFSET 0 -#endif - -#define NR_CPM_INTS 64 - -#define SIU_INT_ERROR ((uint)0x00 + CPM_IRQ_OFFSET) -#define SIU_INT_I2C ((uint)0x01 + CPM_IRQ_OFFSET) -#define SIU_INT_SPI ((uint)0x02 + CPM_IRQ_OFFSET) -#define SIU_INT_RISC ((uint)0x03 + CPM_IRQ_OFFSET) -#define SIU_INT_SMC1 ((uint)0x04 + CPM_IRQ_OFFSET) -#define SIU_INT_SMC2 ((uint)0x05 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA1 ((uint)0x06 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA2 ((uint)0x07 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA3 ((uint)0x08 + CPM_IRQ_OFFSET) -#define SIU_INT_IDMA4 ((uint)0x09 + CPM_IRQ_OFFSET) -#define SIU_INT_SDMA ((uint)0x0a + CPM_IRQ_OFFSET) -#define SIU_INT_USB ((uint)0x0b + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER1 ((uint)0x0c + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER2 ((uint)0x0d + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER3 ((uint)0x0e + CPM_IRQ_OFFSET) -#define SIU_INT_TIMER4 ((uint)0x0f + CPM_IRQ_OFFSET) -#define SIU_INT_TMCNT ((uint)0x10 + CPM_IRQ_OFFSET) -#define SIU_INT_PIT ((uint)0x11 + CPM_IRQ_OFFSET) -#define SIU_INT_PCI ((uint)0x12 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ2 ((uint)0x14 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ3 ((uint)0x15 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ4 ((uint)0x16 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ5 ((uint)0x17 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ6 ((uint)0x18 + CPM_IRQ_OFFSET) -#define SIU_INT_IRQ7 ((uint)0x19 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC1 ((uint)0x20 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC2 ((uint)0x21 + CPM_IRQ_OFFSET) -#define SIU_INT_FCC3 ((uint)0x22 + CPM_IRQ_OFFSET) -#define SIU_INT_MCC1 ((uint)0x24 + CPM_IRQ_OFFSET) -#define SIU_INT_MCC2 ((uint)0x25 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC1 ((uint)0x28 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC2 ((uint)0x29 + CPM_IRQ_OFFSET) -#define SIU_INT_SCC3 ((uint)0x2a + CPM_IRQ_OFFSET) -#define SIU_INT_SCC4 ((uint)0x2b + CPM_IRQ_OFFSET) -#define SIU_INT_PC15 ((uint)0x30 + CPM_IRQ_OFFSET) -#define SIU_INT_PC14 ((uint)0x31 + CPM_IRQ_OFFSET) -#define SIU_INT_PC13 ((uint)0x32 + CPM_IRQ_OFFSET) -#define SIU_INT_PC12 ((uint)0x33 + CPM_IRQ_OFFSET) -#define SIU_INT_PC11 ((uint)0x34 + CPM_IRQ_OFFSET) -#define SIU_INT_PC10 ((uint)0x35 + CPM_IRQ_OFFSET) -#define SIU_INT_PC9 ((uint)0x36 + CPM_IRQ_OFFSET) -#define SIU_INT_PC8 ((uint)0x37 + CPM_IRQ_OFFSET) -#define SIU_INT_PC7 ((uint)0x38 + CPM_IRQ_OFFSET) -#define SIU_INT_PC6 ((uint)0x39 + CPM_IRQ_OFFSET) -#define SIU_INT_PC5 ((uint)0x3a + CPM_IRQ_OFFSET) -#define SIU_INT_PC4 ((uint)0x3b + CPM_IRQ_OFFSET) -#define SIU_INT_PC3 ((uint)0x3c + CPM_IRQ_OFFSET) -#define SIU_INT_PC2 ((uint)0x3d + CPM_IRQ_OFFSET) -#define SIU_INT_PC1 ((uint)0x3e + CPM_IRQ_OFFSET) -#define SIU_INT_PC0 ((uint)0x3f + CPM_IRQ_OFFSET) - -#endif /* CONFIG_8260 */ - -#endif /* Whatever way too big #ifdef */ - -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -/* pedantic: these are long because they are used with set_bit --RR */ -extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; - -/* - * Because many systems have two overlapping names spaces for - * interrupts (ISA and XICS for example), and the ISA interrupts - * have historically not been easy to renumber, we allow ISA - * interrupts to take values 0 - 15, and shift up the remaining - * interrupts by 0x10. - */ -#define NUM_ISA_INTERRUPTS 0x10 -extern int __irq_offset_value; - -static inline int irq_offset_up(int irq) -{ - return(irq + __irq_offset_value); -} - -static inline int irq_offset_down(int irq) -{ - return(irq - __irq_offset_value); -} - -static inline int irq_offset_value(void) -{ - return __irq_offset_value; -} - -#ifdef __DO_IRQ_CANON -extern int ppc_do_canonicalize_irqs; -#else -#define ppc_do_canonicalize_irqs 0 -#endif - -static __inline__ int irq_canonicalize(int irq) -{ - if (ppc_do_canonicalize_irqs && irq == 2) - irq = 9; - return irq; -} -#endif /* CONFIG_PPC_MERGE */ - extern int distribute_irqs; struct irqaction; diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 1a4094704b1..64f5948ebc9 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -59,8 +59,6 @@ obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o -ifeq ($(CONFIG_PPC_MERGE),y) - extra-$(CONFIG_PPC_STD_MMU) := head_32.o extra-$(CONFIG_PPC64) := head_64.o extra-$(CONFIG_40x) := head_40x.o @@ -100,12 +98,6 @@ ifneq ($(CONFIG_PPC_INDIRECT_IO),y) obj-y += iomap.o endif -else -# stuff used from here for ARCH=ppc -smpobj-$(CONFIG_SMP) += smp.o - -endif - obj-$(CONFIG_PPC64) += $(obj64-y) extra-$(CONFIG_PPC_FPU) += fpu.o @@ -121,9 +113,6 @@ PHONY += systbl_chk systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i $(call cmd,systbl_chk) - -ifeq ($(CONFIG_PPC_MERGE),y) - $(obj)/built-in.o: prom_init_check quiet_cmd_prom_init_check = CALL $< @@ -133,7 +122,4 @@ PHONY += prom_init_check prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o $(call cmd,prom_init_check) -endif - - clean-files := vmlinux.lds diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S index 5465e8de0e6..80cac984d85 100644 --- a/arch/powerpc/kernel/cpu_setup_44x.S +++ b/arch/powerpc/kernel/cpu_setup_44x.S @@ -39,12 +39,6 @@ _GLOBAL(__setup_cpu_440gx) _GLOBAL(__setup_cpu_440spe) b __fixup_440A_mcheck - /* Temporary fixup for arch/ppc until we kill the whole thing */ -#ifndef CONFIG_PPC_MERGE -_GLOBAL(__fixup_440A_mcheck) - blr -#endif - /* enable APU between CPU and FPU */ _GLOBAL(__init_fpu_44x) mfspr r3,SPRN_CCR0 diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 6ac8612da3c..d972decf032 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -77,22 +77,12 @@ static int ppc_spurious_interrupts; EXPORT_SYMBOL(__irq_offset_value); atomic_t ppc_n_lost_interrupts; -#ifndef CONFIG_PPC_MERGE -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; -#endif - #ifdef CONFIG_TAU_INT extern int tau_initialized; extern int tau_interrupts(int); #endif #endif /* CONFIG_PPC32 */ -#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) -extern atomic_t ipi_recv; -extern atomic_t ipi_sent; -#endif - #ifdef CONFIG_PPC64 EXPORT_SYMBOL(irq_desc); @@ -216,21 +206,14 @@ int show_interrupts(struct seq_file *p, void *v) skip: spin_unlock_irqrestore(&desc->lock, flags); } else if (i == NR_IRQS) { -#ifdef CONFIG_PPC32 -#ifdef CONFIG_TAU_INT +#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT) if (tau_initialized){ seq_puts(p, "TAU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", tau_interrupts(j)); seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); } -#endif -#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) - /* should this be per processor send/receive? */ - seq_printf(p, "IPI (recv/sent): %10u/%u\n", - atomic_read(&ipi_recv), atomic_read(&ipi_sent)); -#endif -#endif /* CONFIG_PPC32 */ +#endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/ seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); } return 0; @@ -454,8 +437,6 @@ void do_softirq(void) * IRQ controller and virtual interrupts */ -#ifdef CONFIG_PPC_MERGE - static LIST_HEAD(irq_hosts); static DEFINE_SPINLOCK(irq_big_lock); static DEFINE_PER_CPU(unsigned int, irq_radix_reader); @@ -1114,8 +1095,6 @@ static int __init irq_debugfs_init(void) __initcall(irq_debugfs_init); #endif /* CONFIG_VIRQ_DEBUG */ -#endif /* CONFIG_PPC_MERGE */ - #ifdef CONFIG_PPC64 static int __init setup_noirqdistrib(char *str) { diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index e030f3bd502..957bded0020 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -276,10 +276,8 @@ int set_dabr(unsigned long dabr) { __get_cpu_var(current_dabr) = dabr; -#ifdef CONFIG_PPC_MERGE /* XXX for now */ if (ppc_md.set_dabr) return ppc_md.set_dabr(dabr); -#endif /* XXX should we have a CPU_FTR_HAS_DABR ? */ #if defined(CONFIG_PPC64) || defined(CONFIG_6xx) diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index f177c60ea76..65639a43e64 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -788,9 +788,7 @@ static int __init vdso_init(void) return 0; } -#ifdef CONFIG_PPC_MERGE arch_initcall(vdso_init); -#endif int in_gate_area_no_task(unsigned long addr) { diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 2a88e8b9a3c..d69912c07ce 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -6,12 +6,10 @@ ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc endif -ifeq ($(CONFIG_PPC_MERGE),y) obj-y := string.o alloc.o \ checksum_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o obj-$(CONFIG_HAS_IOMEM) += devres.o -endif obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index daf0e1568d6..b8a52062738 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -1,10 +1,8 @@ # # Makefile for 52xx based boards # -ifeq ($(CONFIG_PPC_MERGE),y) obj-y += mpc52xx_pic.o mpc52xx_common.o obj-$(CONFIG_PCI) += mpc52xx_pci.o -endif obj-$(CONFIG_PPC_MPC5200_SIMPLE) += mpc5200_simple.o obj-$(CONFIG_PPC_EFIKA) += efika.o @@ -15,4 +13,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y) obj-$(CONFIG_PM) += lite5200_sleep.o lite5200_pm.o endif -obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o \ No newline at end of file +obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 423a0234dc3..8079e0b4fd6 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -1,13 +1,7 @@ obj-$(CONFIG_FSL_ULI1575) += fsl_uli1575.o -ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_PMAC) += powermac/ -else -ifeq ($(CONFIG_PPC64),y) -obj-$(CONFIG_PPC_PMAC) += powermac/ -endif -endif obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_40x) += 40x/ obj-$(CONFIG_44x) += 44x/ diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 89774177b20..58ecdd72630 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -7,7 +7,7 @@ endif obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o pfunc_core.o \ - pfunc_base.o + pfunc_base.o udbg_scc.o udbg_adb.o obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o @@ -19,4 +19,3 @@ obj-$(CONFIG_NVRAM:m=y) += nvram.o obj-$(CONFIG_PPC64) += nvram.o obj-$(CONFIG_PPC32) += bootx_init.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_PPC_MERGE) += udbg_scc.o udbg_adb.o diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 16a0ed28eb0..a90054b56d5 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -25,7 +25,6 @@ obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \ obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o obj-$(CONFIG_AXON_RAM) += axonram.o -ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_IPIC) += ipic.o @@ -36,7 +35,6 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_4xx) += ppc4xx_pci.o endif -endif # Temporary hack until we have migrated to asm-powerpc ifeq ($(ARCH),powerpc) -- GitLab From 6a9545bd95e88d61df942b9087cb59b8c7a6dc56 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 12:51:06 +0900 Subject: [PATCH 0670/1024] sh: Fix up broken kerneldoc comments. These were completely unparseable, so fix them up. Signed-off-by: Paul Mundt --- arch/sh/include/asm/tlb_64.h | 12 +++--------- arch/sh/kernel/cpu/sh4/sq.c | 2 +- arch/sh/mm/tlb-sh5.c | 20 ++++++-------------- drivers/sh/maple/maple.c | 27 ++++++++++++++------------- 4 files changed, 24 insertions(+), 37 deletions(-) diff --git a/arch/sh/include/asm/tlb_64.h b/arch/sh/include/asm/tlb_64.h index 0a96f3af69e..ef0ae2a28f2 100644 --- a/arch/sh/include/asm/tlb_64.h +++ b/arch/sh/include/asm/tlb_64.h @@ -21,11 +21,9 @@ #ifndef __ASSEMBLY__ /** - * for_each_dtlb_entry + * for_each_dtlb_entry - Iterate over free (non-wired) DTLB entries * * @tlb: TLB entry - * - * Iterate over free (non-wired) DTLB entries */ #define for_each_dtlb_entry(tlb) \ for (tlb = cpu_data->dtlb.first; \ @@ -33,11 +31,9 @@ tlb += cpu_data->dtlb.step) /** - * for_each_itlb_entry + * for_each_itlb_entry - Iterate over free (non-wired) ITLB entries * * @tlb: TLB entry - * - * Iterate over free (non-wired) ITLB entries */ #define for_each_itlb_entry(tlb) \ for (tlb = cpu_data->itlb.first; \ @@ -45,11 +41,9 @@ tlb += cpu_data->itlb.step) /** - * __flush_tlb_slot + * __flush_tlb_slot - Flushes TLB slot @slot. * * @slot: Address of TLB slot. - * - * Flushes TLB slot @slot. */ static inline void __flush_tlb_slot(unsigned long long slot) { diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index dcdf959a3d4..8a8a993f55e 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -199,7 +199,7 @@ EXPORT_SYMBOL(sq_remap); /** * sq_unmap - Unmap a Store Queue allocation - * @map: Pre-allocated Store Queue mapping. + * @vaddr: Pre-allocated Store Queue mapping. * * Unmaps the store queue allocation @map that was previously created by * sq_remap(). Also frees up the pte that was previously inserted into diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c index f34274a1ded..dae131243bc 100644 --- a/arch/sh/mm/tlb-sh5.c +++ b/arch/sh/mm/tlb-sh5.c @@ -15,9 +15,7 @@ #include /** - * sh64_tlb_init - * - * Perform initial setup for the DTLB and ITLB. + * sh64_tlb_init - Perform initial setup for the DTLB and ITLB. */ int __init sh64_tlb_init(void) { @@ -46,9 +44,7 @@ int __init sh64_tlb_init(void) } /** - * sh64_next_free_dtlb_entry - * - * Find the next available DTLB entry + * sh64_next_free_dtlb_entry - Find the next available DTLB entry */ unsigned long long sh64_next_free_dtlb_entry(void) { @@ -56,9 +52,7 @@ unsigned long long sh64_next_free_dtlb_entry(void) } /** - * sh64_get_wired_dtlb_entry - * - * Allocate a wired (locked-in) entry in the DTLB + * sh64_get_wired_dtlb_entry - Allocate a wired (locked-in) entry in the DTLB */ unsigned long long sh64_get_wired_dtlb_entry(void) { @@ -71,12 +65,10 @@ unsigned long long sh64_get_wired_dtlb_entry(void) } /** - * sh64_put_wired_dtlb_entry + * sh64_put_wired_dtlb_entry - Free a wired (locked-in) entry in the DTLB. * * @entry: Address of TLB slot. * - * Free a wired (locked-in) entry in the DTLB. - * * Works like a stack, last one to allocate must be first one to free. */ int sh64_put_wired_dtlb_entry(unsigned long long entry) @@ -115,7 +107,7 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry) } /** - * sh64_setup_tlb_slot + * sh64_setup_tlb_slot - Load up a translation in a wired slot. * * @config_addr: Address of TLB slot. * @eaddr: Virtual address. @@ -154,7 +146,7 @@ inline void sh64_setup_tlb_slot(unsigned long long config_addr, } /** - * sh64_teardown_tlb_slot + * sh64_teardown_tlb_slot - Teardown a translation. * * @config_addr: Address of TLB slot. * diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c index be77a39f224..d1812d32f47 100644 --- a/drivers/sh/maple/maple.c +++ b/drivers/sh/maple/maple.c @@ -147,13 +147,13 @@ static void maple_release_device(struct device *dev) kfree(mdev); } -/* +/** * maple_add_packet - add a single instruction to the queue - * @mdev - maple device - * @function - function on device being queried - * @command - maple command to add - * @length - length of command string (in 32 bit words) - * @data - remainder of command string + * @mdev: maple device + * @function: function on device being queried + * @command: maple command to add + * @length: length of command string (in 32 bit words) + * @data: remainder of command string */ int maple_add_packet(struct maple_device *mdev, u32 function, u32 command, size_t length, void *data) @@ -194,14 +194,15 @@ out: } EXPORT_SYMBOL_GPL(maple_add_packet); -/* +/** * maple_add_packet_sleeps - add a single instruction to the queue - * - waits for lock to be free - * @mdev - maple device - * @function - function on device being queried - * @command - maple command to add - * @length - length of command string (in 32 bit words) - * @data - remainder of command string + * @mdev: maple device + * @function: function on device being queried + * @command: maple command to add + * @length: length of command string (in 32 bit words) + * @data: remainder of command string + * + * Same as maple_add_packet(), but waits for the lock to become free. */ int maple_add_packet_sleeps(struct maple_device *mdev, u32 function, u32 command, size_t length, void *data) -- GitLab From b5ed042249cb5f76a428aa40ca219d591dad9eea Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 12:53:55 +0900 Subject: [PATCH 0671/1024] sh: Add documentation and integrate into docbook build. This adds some preliminary docbook bits for SH, tying in to the few interfaces that are exposed and that have adequate kerneldoc comments. Signed-off-by: Paul Mundt --- Documentation/DocBook/Makefile | 2 +- Documentation/DocBook/sh.tmpl | 105 +++++++++++++++++++++++++++++++++ 2 files changed, 106 insertions(+), 1 deletion(-) create mode 100644 Documentation/DocBook/sh.tmpl diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 0eb0d027eb3..1d1b34500b6 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -12,7 +12,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ - mac80211.xml debugobjects.xml + mac80211.xml debugobjects.xml sh.xml ### # The build process is as follows (targets): diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl new file mode 100644 index 00000000000..0c3dc4c69dd --- /dev/null +++ b/Documentation/DocBook/sh.tmpl @@ -0,0 +1,105 @@ + + + + + + SuperH Interfaces Guide + + + + Paul + Mundt + +
+ lethal@linux-sh.org +
+ + + + + + 2008 + Paul Mundt + + + 2008 + Renesas Technology Corp. + + + + + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2 as published by the Free Software Foundation. + + + + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + + + + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + + + + For more details see the file COPYING in the source + distribution of Linux. + + + + + + + + Memory Management + + SH-4 + + Store Queue API +!Earch/sh/kernel/cpu/sh4/sq.c + + + + SH-5 + + TLB Interfaces +!Iarch/sh/mm/tlb-sh5.c +!Iarch/sh/include/asm/tlb_64.h + + + + + Clock Framework Extensions +!Iarch/sh/include/asm/clock.h + + + Machine Specific Interfaces + + mach-dreamcast +!Iarch/sh/boards/mach-dreamcast/rtc.c + + + mach-x3proto +!Earch/sh/boards/mach-x3proto/ilsel.c + + + + Busses + + SuperHyway +!Edrivers/sh/superhyway/superhyway.c + + + + Maple +!Edrivers/sh/maple/maple.c + + + -- GitLab From f880374c2fe37aad3fa62253a4bc125d7a933aad Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 3 Aug 2008 21:15:08 -0700 Subject: [PATCH 0672/1024] sctp: Drop ipfargok in sctp_xmit function The ipfragok flag controls whether the packet may be fragmented either on the local host on beyond. The latter is only valid on IPv4. In fact, we never want to do the latter even on IPv4 when PMTU is enabled. This is because even though we can't fragment packets within SCTP due to the prtocol's inherent faults, we can still fragment it at IP layer. By setting the DF bit we will improve the PMTU process. RFC 2960 only says that we SHOULD clear the DF bit in this case, so we're compliant even if we set the DF bit. In fact RFC 4960 no longer has this statement. Once we make this change, we only need to control the local fragmentation. There is already a bit in the skb which controls that, local_df. So this patch sets that instead of using the ipfragok argument. The only complication is that there isn't a struct sock object per transport, so for IPv4 we have to resort to changing the pmtudisc field for every packet. This should be safe though as the protocol is single-threaded. Note that after this patch we can remove ipfragok from the rest of the stack too. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/net/sctp/structs.h | 3 +-- net/sctp/ipv6.c | 8 +++++--- net/sctp/output.c | 6 ++---- net/sctp/protocol.c | 9 +++++++-- 4 files changed, 15 insertions(+), 11 deletions(-) diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 535a18f57a1..ab1c472ea75 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -524,8 +524,7 @@ static inline void sctp_ssn_skip(struct sctp_stream *stream, __u16 id, */ struct sctp_af { int (*sctp_xmit) (struct sk_buff *skb, - struct sctp_transport *, - int ipfragok); + struct sctp_transport *); int (*setsockopt) (struct sock *sk, int level, int optname, diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index a238d6834b3..483a01d0740 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -195,8 +195,7 @@ out: } /* Based on tcp_v6_xmit() in tcp_ipv6.c. */ -static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *transport, - int ipfragok) +static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *transport) { struct sock *sk = skb->sk; struct ipv6_pinfo *np = inet6_sk(sk); @@ -231,7 +230,10 @@ static int sctp_v6_xmit(struct sk_buff *skb, struct sctp_transport *transport, SCTP_INC_STATS(SCTP_MIB_OUTSCTPPACKS); - return ip6_xmit(sk, skb, &fl, np->opt, ipfragok); + if (!(transport->param_flags & SPP_PMTUD_ENABLE)) + skb->local_df = 1; + + return ip6_xmit(sk, skb, &fl, np->opt, 0); } /* Returns the dst cache entry for the given source and destination ip diff --git a/net/sctp/output.c b/net/sctp/output.c index 45684646b1d..0dc4a7dfb23 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -586,10 +586,8 @@ int sctp_packet_transmit(struct sctp_packet *packet) SCTP_DEBUG_PRINTK("***sctp_transmit_packet*** skb len %d\n", nskb->len); - if (tp->param_flags & SPP_PMTUD_ENABLE) - (*tp->af_specific->sctp_xmit)(nskb, tp, packet->ipfragok); - else - (*tp->af_specific->sctp_xmit)(nskb, tp, 1); + nskb->local_df = packet->ipfragok; + (*tp->af_specific->sctp_xmit)(nskb, tp); out: packet->size = packet->overhead; diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index a6e0818bcff..0b65354aaf6 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -862,16 +862,21 @@ static int sctp_inet_supported_addrs(const struct sctp_sock *opt, /* Wrapper routine that calls the ip transmit routine. */ static inline int sctp_v4_xmit(struct sk_buff *skb, - struct sctp_transport *transport, int ipfragok) + struct sctp_transport *transport) { + struct inet_sock *inet = inet_sk(skb->sk); + SCTP_DEBUG_PRINTK("%s: skb:%p, len:%d, " "src:%u.%u.%u.%u, dst:%u.%u.%u.%u\n", __func__, skb, skb->len, NIPQUAD(skb->rtable->rt_src), NIPQUAD(skb->rtable->rt_dst)); + inet->pmtudisc = transport->param_flags & SPP_PMTUD_ENABLE ? + IP_PMTUDISC_DO : IP_PMTUDISC_DONT; + SCTP_INC_STATS(SCTP_MIB_OUTSCTPPACKS); - return ip_queue_xmit(skb, ipfragok); + return ip_queue_xmit(skb, 0); } static struct sctp_af sctp_af_inet; -- GitLab From 283d07ac201ee9f8aa6dc6f7519436b48760baff Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 3 Aug 2008 21:15:59 -0700 Subject: [PATCH 0673/1024] ipv6: Do not drop packet if skb->local_df is set to true The old code will drop IPv6 packet if ipfragok is not set, since ipfragok is obsoleted, will be instead by used skb->local_df, so this check must be changed to skb->local_df. This patch fix this problem and not drop packet if skb->local_df is set to true. Signed-off-by: Wei Yongjun Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index a027003d69a..a4402de425d 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -269,7 +269,7 @@ int ip6_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl, skb->mark = sk->sk_mark; mtu = dst_mtu(dst); - if ((skb->len <= mtu) || ipfragok || skb_is_gso(skb)) { + if ((skb->len <= mtu) || skb->local_df || skb_is_gso(skb)) { IP6_INC_STATS(ip6_dst_idev(skb->dst), IPSTATS_MIB_OUTREQUESTS); return NF_HOOK(PF_INET6, NF_INET_LOCAL_OUT, skb, NULL, dst->dev, -- GitLab From 6e583ce5242f32e925dcb198f7123256d0798370 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Sun, 3 Aug 2008 21:29:57 -0700 Subject: [PATCH 0674/1024] net: eliminate refcounting in backlog queue Avoid the overhead of atomic increment/decrement on each received packet. This helps performance of non-NAPI devices (like loopback). Use cleanup function to walk queue on each cpu and clean out any left over packets. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/core/dev.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index cbf80098980..fc6c9881eca 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1909,7 +1909,6 @@ int netif_rx(struct sk_buff *skb) if (queue->input_pkt_queue.qlen <= netdev_max_backlog) { if (queue->input_pkt_queue.qlen) { enqueue: - dev_hold(skb->dev); __skb_queue_tail(&queue->input_pkt_queue, skb); local_irq_restore(flags); return NET_RX_SUCCESS; @@ -2270,6 +2269,20 @@ out: return ret; } +/* Network device is going away, flush any packets still pending */ +static void flush_backlog(void *arg) +{ + struct net_device *dev = arg; + struct softnet_data *queue = &__get_cpu_var(softnet_data); + struct sk_buff *skb, *tmp; + + skb_queue_walk_safe(&queue->input_pkt_queue, skb, tmp) + if (skb->dev == dev) { + __skb_unlink(skb, &queue->input_pkt_queue); + kfree_skb(skb); + } +} + static int process_backlog(struct napi_struct *napi, int quota) { int work = 0; @@ -2279,7 +2292,6 @@ static int process_backlog(struct napi_struct *napi, int quota) napi->weight = weight_p; do { struct sk_buff *skb; - struct net_device *dev; local_irq_disable(); skb = __skb_dequeue(&queue->input_pkt_queue); @@ -2288,14 +2300,9 @@ static int process_backlog(struct napi_struct *napi, int quota) local_irq_enable(); break; } - local_irq_enable(); - dev = skb->dev; - netif_receive_skb(skb); - - dev_put(dev); } while (++work < quota && jiffies == start_time); return work; @@ -4169,6 +4176,8 @@ void netdev_run_todo(void) dev->reg_state = NETREG_UNREGISTERED; + on_each_cpu(flush_backlog, dev, 1); + netdev_wait_allrefs(dev); /* paranoia */ -- GitLab From 3108cf061228c2c2951006c80fb6fe832000adda Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 13:32:04 +0900 Subject: [PATCH 0675/1024] sh: Fix up __bug_table handling in module loader. We should be calling in to the lib/bug.c module helpers, fix that up. Signed-off-by: Paul Mundt --- arch/sh/kernel/module.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c index 5482e65375a..6ba2b79b826 100644 --- a/arch/sh/kernel/module.c +++ b/arch/sh/kernel/module.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -145,9 +146,10 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) { - return 0; + return module_bug_finalize(hdr, sechdrs, me); } void module_arch_cleanup(struct module *mod) { + module_bug_cleanup(mod); } -- GitLab From 4b59c97325371d51275bdb50523fa98a301615b0 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 13:34:29 +0900 Subject: [PATCH 0676/1024] sh: module_alloc() should be using vmalloc_exec(). SH-X2 extended mode TLB allows for toggling of the exec bit, so make sure we are using the right protection bits for module space there also. Signed-off-by: Paul Mundt --- arch/sh/kernel/module.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c index 6ba2b79b826..c43081039dd 100644 --- a/arch/sh/kernel/module.c +++ b/arch/sh/kernel/module.c @@ -37,7 +37,8 @@ void *module_alloc(unsigned long size) { if (size == 0) return NULL; - return vmalloc(size); + + return vmalloc_exec(size); } -- GitLab From c3b4adfa65bae300a143188491e285556ca80fff Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 13:42:49 +0900 Subject: [PATCH 0677/1024] sh: Save NUMA node data in vmcore for crash dumps. Presently the NUMA node data isn't saved on kexec. This implements a simple arch_crash_save_vmcoreinfo() for saving off the relevant data. Signed-off-by: Paul Mundt --- arch/sh/kernel/machine_kexec.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c index ec1eadce4aa..4703dff174d 100644 --- a/arch/sh/kernel/machine_kexec.c +++ b/arch/sh/kernel/machine_kexec.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -104,3 +105,10 @@ void machine_kexec(struct kimage *image) (*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg); } +void arch_crash_save_vmcoreinfo(void) +{ +#ifdef CONFIG_NUMA + VMCOREINFO_SYMBOL(node_data); + VMCOREINFO_LENGTH(node_data, MAX_NUMNODES); +#endif +} -- GitLab From bdcab87b1c54f61dbc0a77648fee4c2b17964d5c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 14:09:15 +0900 Subject: [PATCH 0678/1024] sh: define GENERIC_LOCKBREAK. Needed for fixing up the __raw_spin_is_contended() reference which results in a build error. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 0ae541107f3..37b91017818 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -63,6 +63,10 @@ config GENERIC_TIME config GENERIC_CLOCKEVENTS def_bool n +config GENERIC_LOCKBREAK + def_bool y + depends on SMP && PREEMPT + config SYS_SUPPORTS_PM bool -- GitLab From 5093c9a4e41518425d42c0bb5bb92f514ec77b1d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 14:17:13 +0900 Subject: [PATCH 0679/1024] sh: define GENERIC_HARDIRQS_NO__DO_IRQ. We haven't called in to __do_IRQ() in a long time, so it seems like a reasonable time to switch this on by default. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 37b91017818..1a4dc766344 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -48,6 +48,9 @@ config GENERIC_HWEIGHT config GENERIC_HARDIRQS def_bool y +config GENERIC_HARDIRQS_NO__DO_IRQ + def_bool y + config GENERIC_IRQ_PROBE def_bool y -- GitLab From 42ced5561a3f49ba0ef09e94ccc016841fc94aa7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 14:18:53 +0900 Subject: [PATCH 0680/1024] sh: Kill off ARCH_SUPPORTS_AOUT and remnants of a.out support. SH never really supported a.out, so this was all just copied over blindly from x86 way back when. As we don't reference linux/a.out.h anywhere in the tree, these can now safely be killed off. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 3 --- arch/sh/include/asm/a.out.h | 20 -------------------- 2 files changed, 23 deletions(-) delete mode 100644 arch/sh/include/asm/a.out.h diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 1a4dc766344..5131d50f851 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -101,9 +101,6 @@ config ARCH_HAS_ILOG2_U64 config ARCH_NO_VIRT_TO_BUS def_bool y -config ARCH_SUPPORTS_AOUT - def_bool y - config IO_TRAPPED bool diff --git a/arch/sh/include/asm/a.out.h b/arch/sh/include/asm/a.out.h deleted file mode 100644 index 1f93130e179..00000000000 --- a/arch/sh/include/asm/a.out.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __ASM_SH_A_OUT_H -#define __ASM_SH_A_OUT_H - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#endif /* __ASM_SH_A_OUT_H */ -- GitLab From d8eb2fab18b856fcaebe2619e8eaaa152baebc66 Mon Sep 17 00:00:00 2001 From: Takashi Yoshii Date: Mon, 4 Aug 2008 14:28:38 +0900 Subject: [PATCH 0681/1024] add addrespace definition for sh2a. Newfile: arch/sh/include/cpu-sh2a/cpu/addrspace.h This file seems had be removed to use fallback (cpu-common/cpu/addrspace.h), but, I'd like to add sh2a specific file here, because 1. the values defined there are not suitable for sh2a. 2. I don't think there is "common" definition for these values. Values are chosen by consideration of followings... P1 is 0. perhaps no question. P2 is from hardware manual, which says no-cache area starts at 20000000. It means that P? space size=20000000. P3 is P2+size since asm/ptrace.h uses P3 as a end of P2. P4 is P3+size since asm/fixup.h uses P4 as a end of P3. Signed-off-by: Takashi YOSHII Signed-off-by: Paul Mundt --- arch/sh/include/cpu-sh2a/cpu/addrspace.h | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 arch/sh/include/cpu-sh2a/cpu/addrspace.h diff --git a/arch/sh/include/cpu-sh2a/cpu/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h new file mode 100644 index 00000000000..31eb4b58aa6 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/addrspace.h @@ -0,0 +1,10 @@ +#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H +#define __ASM_SH_CPU_SH2A_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x00000000 +#define P2SEG 0x20000000 +#define P3SEG 0x40000000 +#define P4SEG 0x60000000 + +#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */ -- GitLab From 1af446edfe3239b2b731f3458b3c285c397464cc Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 16:01:47 +0900 Subject: [PATCH 0682/1024] nommu: Provide vmalloc_exec(). Now that SH has switched to vmalloc_exec() for PAGE_KERNEL_EXEC usage, it's apparent that nommu has no vmalloc_exec() definition of its own. Stub in the one from mm/vmalloc.c. Signed-off-by: Paul Mundt --- mm/nommu.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/mm/nommu.c b/mm/nommu.c index 5edccd9c921..ed75bc962fb 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -266,6 +266,27 @@ void *vmalloc_node(unsigned long size, int node) } EXPORT_SYMBOL(vmalloc_node); +#ifndef PAGE_KERNEL_EXEC +# define PAGE_KERNEL_EXEC PAGE_KERNEL +#endif + +/** + * vmalloc_exec - allocate virtually contiguous, executable memory + * @size: allocation size + * + * Kernel-internal function to allocate enough pages to cover @size + * the page level allocator and map them into contiguous and + * executable kernel virtual space. + * + * For tight control over page level allocator and protection flags + * use __vmalloc() instead. + */ + +void *vmalloc_exec(unsigned long size) +{ + return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL_EXEC); +} + /** * vmalloc_32 - allocate virtually contiguous memory (32bit addressable) * @size: allocation size -- GitLab From cce2d453e4940d3fccd42a6917d01027148e11c3 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Mon, 4 Aug 2008 16:33:47 +0900 Subject: [PATCH 0683/1024] SH2(A) cache update Includes: - SH2 (7619) Writeback support. - SH2A cache handling fix. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- arch/sh/include/cpu-sh2/cpu/cache.h | 6 +- arch/sh/include/cpu-sh2a/cpu/cache.h | 3 + arch/sh/include/cpu-sh2a/cpu/cacheflush.h | 34 ++++++ arch/sh/mm/Kconfig | 1 - arch/sh/mm/Makefile_32 | 11 +- arch/sh/mm/cache-sh2.c | 45 ++++++-- arch/sh/mm/cache-sh2a.c | 129 ++++++++++++++++++++++ 7 files changed, 213 insertions(+), 16 deletions(-) create mode 100644 arch/sh/include/cpu-sh2a/cpu/cacheflush.h create mode 100644 arch/sh/mm/cache-sh2a.c diff --git a/arch/sh/include/cpu-sh2/cpu/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h index 4e0b1650068..673515bc413 100644 --- a/arch/sh/include/cpu-sh2/cpu/cache.h +++ b/arch/sh/include/cpu-sh2/cpu/cache.h @@ -21,11 +21,11 @@ #define CCR 0xffffffec #define CCR_CACHE_CE 0x01 /* Cache enable */ -#define CCR_CACHE_WT 0x06 /* CCR[bit1=1,bit2=1] */ +#define CCR_CACHE_WT 0x02 /* CCR[bit1=1,bit2=1] */ /* 0x00000000-0x7fffffff: Write-through */ /* 0x80000000-0x9fffffff: Write-back */ /* 0xc0000000-0xdfffffff: Write-through */ -#define CCR_CACHE_CB 0x00 /* CCR[bit1=0,bit2=0] */ +#define CCR_CACHE_CB 0x04 /* CCR[bit1=0,bit2=0] */ /* 0x00000000-0x7fffffff: Write-back */ /* 0x80000000-0x9fffffff: Write-through */ /* 0xc0000000-0xdfffffff: Write-back */ @@ -36,6 +36,8 @@ #define CCR_CACHE_ENABLE CCR_CACHE_CE #define CCR_CACHE_INVALIDATE CCR_CACHE_CF +#define CACHE_PHYSADDR_MASK 0x1ffffc00 + #endif #endif /* __ASM_CPU_SH2_CACHE_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h index afe228b3f49..defb0baa5a0 100644 --- a/arch/sh/include/cpu-sh2a/cpu/cache.h +++ b/arch/sh/include/cpu-sh2a/cpu/cache.h @@ -36,5 +36,8 @@ #define CCR_CACHE_ENABLE (CCR_CACHE_OCE | CCR_CACHE_ICE) #define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI | CCR_CACHE_ICI) +#define CCR_ICACHE_INVALIDATE CCR_CACHE_ICI +#define CCR_OCACHE_INVALIDATE CCR_CACHE_OCI +#define CACHE_PHYSADDR_MASK 0x1ffffc00 #endif /* __ASM_CPU_SH2A_CACHE_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h new file mode 100644 index 00000000000..3d3b9205d2a --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h @@ -0,0 +1,34 @@ +#ifndef __ASM_CPU_SH2A_CACHEFLUSH_H +#define __ASM_CPU_SH2A_CACHEFLUSH_H + +/* + * Cache flushing: + * + * - flush_cache_all() flushes entire cache + * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking + * - flush_cache_page(mm, vmaddr, pfn) flushes a single page + * - flush_cache_range(vma, start, end) flushes a range of pages + * + * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache + * - flush_icache_range(start, end) flushes(invalidates) a range for icache + * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache + * + * Caches are indexed (effectively) by physical address on SH-2, so + * we don't need them. + */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +void flush_icache_range(unsigned long start, unsigned long end); +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_sigtramp(vaddr) do { } while (0) + +#define p3_cache_init() do { } while (0) +#endif /* __ASM_CPU_SH2A_CACHEFLUSH_H */ diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 56d0a7daa34..9c131cac91a 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -237,7 +237,6 @@ choice config CACHE_WRITEBACK bool "Write-back" - depends on CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5 config CACHE_WRITETHROUGH bool "Write-through" diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32 index e295db60b91..70e0906023c 100644 --- a/arch/sh/mm/Makefile_32 +++ b/arch/sh/mm/Makefile_32 @@ -5,12 +5,15 @@ obj-y := init.o extable_32.o consistent.o ifndef CONFIG_CACHE_OFF -obj-$(CONFIG_CPU_SH2) += cache-sh2.o -obj-$(CONFIG_CPU_SH3) += cache-sh3.o -obj-$(CONFIG_CPU_SH4) += cache-sh4.o -obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o +cache-$(CONFIG_CPU_SH2) := cache-sh2.o +cache-$(CONFIG_CPU_SH2A) := cache-sh2a.o +cache-$(CONFIG_CPU_SH3) := cache-sh3.o +cache-$(CONFIG_CPU_SH4) := cache-sh4.o +cache-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o endif +obj-y += $(cache-y) + mmu-y := tlb-nommu.o pg-nommu.o mmu-$(CONFIG_MMU) := fault_32.o tlbflush_32.o ioremap_32.o diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c index 6614033f6be..c4e80d2b764 100644 --- a/arch/sh/mm/cache-sh2.c +++ b/arch/sh/mm/cache-sh2.c @@ -2,6 +2,7 @@ * arch/sh/mm/cache-sh2.c * * Copyright (C) 2002 Paul Mundt + * Copyright (C) 2008 Yoshinori Sato * * Released under the terms of the GNU GPL v2.0. */ @@ -24,8 +25,15 @@ void __flush_wback_region(void *start, int size) end = ((unsigned long)start + size + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1); for (v = begin; v < end; v+=L1_CACHE_BYTES) { - /* FIXME cache purge */ - ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); + unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0); + int way; + for (way = 0; way < 4; way++) { + unsigned long data = ctrl_inl(addr | (way << 12)); + if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) { + data &= ~SH_CACHE_UPDATED; + ctrl_outl(data, addr | (way << 12)); + } + } } } @@ -37,21 +45,40 @@ void __flush_purge_region(void *start, int size) begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); end = ((unsigned long)start + size + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1); - for (v = begin; v < end; v+=L1_CACHE_BYTES) { - ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); - } + + for (v = begin; v < end; v+=L1_CACHE_BYTES) + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008); } void __flush_invalidate_region(void *start, int size) { +#ifdef CONFIG_CACHE_WRITEBACK + /* + * SH-2 does not support individual line invalidation, only a + * global invalidate. + */ + unsigned long ccr; + unsigned long flags; + local_irq_save(flags); + jump_to_uncached(); + + ccr = ctrl_inl(CCR); + ccr |= CCR_CACHE_INVALIDATE; + ctrl_outl(ccr, CCR); + + back_to_cached(); + local_irq_restore(flags); +#else unsigned long v; unsigned long begin, end; begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); end = ((unsigned long)start + size + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1); - for (v = begin; v < end; v+=L1_CACHE_BYTES) { - ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); - } -} + for (v = begin; v < end; v+=L1_CACHE_BYTES) + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008); +#endif +} diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c new file mode 100644 index 00000000000..62c0c5f3512 --- /dev/null +++ b/arch/sh/mm/cache-sh2a.c @@ -0,0 +1,129 @@ +/* + * arch/sh/mm/cache-sh2a.c + * + * Copyright (C) 2008 Yoshinori Sato + * + * Released under the terms of the GNU GPL v2.0. + */ + +#include +#include + +#include +#include +#include +#include +#include + +void __flush_wback_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + unsigned long flags; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + + local_irq_save(flags); + jump_to_uncached(); + + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0); + int way; + for (way = 0; way < 4; way++) { + unsigned long data = ctrl_inl(addr | (way << 11)); + if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) { + data &= ~SH_CACHE_UPDATED; + ctrl_outl(data, addr | (way << 11)); + } + } + } + + back_to_cached(); + local_irq_restore(flags); +} + +void __flush_purge_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + unsigned long flags; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + + local_irq_save(flags); + jump_to_uncached(); + + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + } + back_to_cached(); + local_irq_restore(flags); +} + +void __flush_invalidate_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + unsigned long flags; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + local_irq_save(flags); + jump_to_uncached(); + +#ifdef CONFIG_CACHE_WRITEBACK + ctrl_outl(ctrl_inl(CCR) | CCR_OCACHE_INVALIDATE, CCR); + /* I-cache invalidate */ + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + } +#else + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + } +#endif + back_to_cached(); + local_irq_restore(flags); +} + +/* WBack O-Cache and flush I-Cache */ +void flush_icache_range(unsigned long start, unsigned long end) +{ + unsigned long v; + unsigned long flags; + + start = start & ~(L1_CACHE_BYTES-1); + end = (end + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1); + + local_irq_save(flags); + jump_to_uncached(); + + for (v = start; v < end; v+=L1_CACHE_BYTES) { + unsigned long addr = (v & 0x000007f0); + int way; + /* O-Cache writeback */ + for (way = 0; way < 4; way++) { + unsigned long data = ctrl_inl(CACHE_OC_ADDRESS_ARRAY | addr | (way << 11)); + if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) { + data &= ~SH_CACHE_UPDATED; + ctrl_outl(data, CACHE_OC_ADDRESS_ARRAY | addr | (way << 11)); + } + } + /* I-Cache invalidate */ + ctrl_outl(addr, + CACHE_IC_ADDRESS_ARRAY | addr | 0x00000008); + } + + back_to_cached(); + local_irq_restore(flags); +} -- GitLab From f5663f5bded3364158e2d31904173cb1debc2ecd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 16:52:34 +0900 Subject: [PATCH 0684/1024] sh: enable maple_keyb in dreamcast_defconfig. Signed-off-by: Paul Mundt --- arch/sh/configs/dreamcast_defconfig | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig index d4075283956..3dc1cbd8a98 100644 --- a/arch/sh/configs/dreamcast_defconfig +++ b/arch/sh/configs/dreamcast_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 01:34:24 2008 +# Linux kernel version: 2.6.27-rc1 +# Mon Aug 4 16:49:13 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,6 +11,7 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y @@ -21,7 +22,6 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -87,6 +87,7 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_USE_GENERIC_SMP_HELPERS is not set CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -284,6 +285,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SECCOMP=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -317,10 +319,6 @@ CONFIG_PCI_LEGACY=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -555,7 +553,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_MAPLE is not set +CONFIG_KEYBOARD_MAPLE=y # CONFIG_KEYBOARD_SH_KEYSC is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set -- GitLab From 1a61c88defcd611bd148d6c960b498e1b8bbbe00 Mon Sep 17 00:00:00 2001 From: zhangxiliang Date: Sat, 2 Aug 2008 10:56:37 +0800 Subject: [PATCH 0685/1024] Re: [PATCH] Fix the kernel panic of audit_filter_task when key field is set Sorry, I miss a blank between if and "(". And I add "unlikely" to check "ctx" in audit_match_perm() and audit_match_filetype(). This is a new patch for it. Signed-off-by: Zhang Xiliang Signed-off-by: Al Viro --- kernel/auditsc.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 496c3dd3727..972f8e61d36 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -243,6 +243,9 @@ static inline int open_arg(int flags, int mask) static int audit_match_perm(struct audit_context *ctx, int mask) { + if (unlikely(!ctx)) + return 0; + unsigned n = ctx->major; switch (audit_classify_syscall(ctx->arch, n)) { case 0: /* native */ @@ -284,6 +287,10 @@ static int audit_match_filetype(struct audit_context *ctx, int which) { unsigned index = which & ~S_IFMT; mode_t mode = which & S_IFMT; + + if (unlikely(!ctx)) + return 0; + if (index >= ctx->name_count) return 0; if (ctx->names[index].ino == -1) -- GitLab From bf9c8c9ddef7ef761ae9747349175adad0ef16ce Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 1 Aug 2008 14:58:44 -0500 Subject: [PATCH 0686/1024] ALSA: ASoC: fix SNDCTL_DSP_SYNC support in Freescale 8610 sound drivers If an OSS application calls SNDCTL_DSP_SYNC, then ALSA will call the driver's _hw_params and _prepare functions again. On the Freescale MPC8610 DMA ASoC driver, this caused the DMA controller to be unneccessarily re-programmed, and apparently it doesn't like that. The DMA will then not operate when instructed. This patch relocates much of the DMA programming to fsl_dma_open(), which is called only once. Signed-off-by: Timur Tabi Signed-off-by: Takashi Iwai --- sound/soc/fsl/fsl_dma.c | 235 +++++++++++++++++++++------------------- 1 file changed, 124 insertions(+), 111 deletions(-) diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index 7ceea2bba1f..d2d3da9729f 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -327,14 +327,75 @@ static int fsl_dma_new(struct snd_card *card, struct snd_soc_dai *dai, * fsl_dma_open: open a new substream. * * Each substream has its own DMA buffer. + * + * ALSA divides the DMA buffer into N periods. We create NUM_DMA_LINKS link + * descriptors that ping-pong from one period to the next. For example, if + * there are six periods and two link descriptors, this is how they look + * before playback starts: + * + * The last link descriptor + * ____________ points back to the first + * | | + * V | + * ___ ___ | + * | |->| |->| + * |___| |___| + * | | + * | | + * V V + * _________________________________________ + * | | | | | | | The DMA buffer is + * | | | | | | | divided into 6 parts + * |______|______|______|______|______|______| + * + * and here's how they look after the first period is finished playing: + * + * ____________ + * | | + * V | + * ___ ___ | + * | |->| |->| + * |___| |___| + * | | + * |______________ + * | | + * V V + * _________________________________________ + * | | | | | | | + * | | | | | | | + * |______|______|______|______|______|______| + * + * The first link descriptor now points to the third period. The DMA + * controller is currently playing the second period. When it finishes, it + * will jump back to the first descriptor and play the third period. + * + * There are four reasons we do this: + * + * 1. The only way to get the DMA controller to automatically restart the + * transfer when it gets to the end of the buffer is to use chaining + * mode. Basic direct mode doesn't offer that feature. + * 2. We need to receive an interrupt at the end of every period. The DMA + * controller can generate an interrupt at the end of every link transfer + * (aka segment). Making each period into a DMA segment will give us the + * interrupts we need. + * 3. By creating only two link descriptors, regardless of the number of + * periods, we do not need to reallocate the link descriptors if the + * number of periods changes. + * 4. All of the audio data is still stored in a single, contiguous DMA + * buffer, which is what ALSA expects. We're just dividing it into + * contiguous parts, and creating a link descriptor for each one. */ static int fsl_dma_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; struct fsl_dma_private *dma_private; + struct ccsr_dma_channel __iomem *dma_channel; dma_addr_t ld_buf_phys; + u64 temp_link; /* Pointer to next link descriptor */ + u32 mr; unsigned int channel; int ret = 0; + unsigned int i; /* * Reject any DMA buffer whose size is not a multiple of the period @@ -395,68 +456,74 @@ static int fsl_dma_open(struct snd_pcm_substream *substream) snd_soc_set_runtime_hwparams(substream, &fsl_dma_hardware); runtime->private_data = dma_private; + /* Program the fixed DMA controller parameters */ + + dma_channel = dma_private->dma_channel; + + temp_link = dma_private->ld_buf_phys + + sizeof(struct fsl_dma_link_descriptor); + + for (i = 0; i < NUM_DMA_LINKS; i++) { + struct fsl_dma_link_descriptor *link = &dma_private->link[i]; + + link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); + link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); + link->next = cpu_to_be64(temp_link); + + temp_link += sizeof(struct fsl_dma_link_descriptor); + } + /* The last link descriptor points to the first */ + dma_private->link[i - 1].next = cpu_to_be64(dma_private->ld_buf_phys); + + /* Tell the DMA controller where the first link descriptor is */ + out_be32(&dma_channel->clndar, + CCSR_DMA_CLNDAR_ADDR(dma_private->ld_buf_phys)); + out_be32(&dma_channel->eclndar, + CCSR_DMA_ECLNDAR_ADDR(dma_private->ld_buf_phys)); + + /* The manual says the BCR must be clear before enabling EMP */ + out_be32(&dma_channel->bcr, 0); + + /* + * Program the mode register for interrupts, external master control, + * and source/destination hold. Also clear the Channel Abort bit. + */ + mr = in_be32(&dma_channel->mr) & + ~(CCSR_DMA_MR_CA | CCSR_DMA_MR_DAHE | CCSR_DMA_MR_SAHE); + + /* + * We want External Master Start and External Master Pause enabled, + * because the SSI is controlling the DMA controller. We want the DMA + * controller to be set up in advance, and then we signal only the SSI + * to start transferring. + * + * We want End-Of-Segment Interrupts enabled, because this will generate + * an interrupt at the end of each segment (each link descriptor + * represents one segment). Each DMA segment is the same thing as an + * ALSA period, so this is how we get an interrupt at the end of every + * period. + * + * We want Error Interrupt enabled, so that we can get an error if + * the DMA controller is mis-programmed somehow. + */ + mr |= CCSR_DMA_MR_EOSIE | CCSR_DMA_MR_EIE | CCSR_DMA_MR_EMP_EN | + CCSR_DMA_MR_EMS_EN; + + /* For playback, we want the destination address to be held. For + capture, set the source address to be held. */ + mr |= (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? + CCSR_DMA_MR_DAHE : CCSR_DMA_MR_SAHE; + + out_be32(&dma_channel->mr, mr); + return 0; } /** - * fsl_dma_hw_params: allocate the DMA buffer and the DMA link descriptors. - * - * ALSA divides the DMA buffer into N periods. We create NUM_DMA_LINKS link - * descriptors that ping-pong from one period to the next. For example, if - * there are six periods and two link descriptors, this is how they look - * before playback starts: - * - * The last link descriptor - * ____________ points back to the first - * | | - * V | - * ___ ___ | - * | |->| |->| - * |___| |___| - * | | - * | | - * V V - * _________________________________________ - * | | | | | | | The DMA buffer is - * | | | | | | | divided into 6 parts - * |______|______|______|______|______|______| - * - * and here's how they look after the first period is finished playing: - * - * ____________ - * | | - * V | - * ___ ___ | - * | |->| |->| - * |___| |___| - * | | - * |______________ - * | | - * V V - * _________________________________________ - * | | | | | | | - * | | | | | | | - * |______|______|______|______|______|______| + * fsl_dma_hw_params: continue initializing the DMA links * - * The first link descriptor now points to the third period. The DMA - * controller is currently playing the second period. When it finishes, it - * will jump back to the first descriptor and play the third period. - * - * There are four reasons we do this: - * - * 1. The only way to get the DMA controller to automatically restart the - * transfer when it gets to the end of the buffer is to use chaining - * mode. Basic direct mode doesn't offer that feature. - * 2. We need to receive an interrupt at the end of every period. The DMA - * controller can generate an interrupt at the end of every link transfer - * (aka segment). Making each period into a DMA segment will give us the - * interrupts we need. - * 3. By creating only two link descriptors, regardless of the number of - * periods, we do not need to reallocate the link descriptors if the - * number of periods changes. - * 4. All of the audio data is still stored in a single, contiguous DMA - * buffer, which is what ALSA expects. We're just dividing it into - * contiguous parts, and creating a link descriptor for each one. + * This function obtains hardware parameters about the opened stream and + * programs the DMA controller accordingly. * * Note that due to a quirk of the SSI's STX register, the target address * for the DMA operations depends on the sample size. So we don't program @@ -468,11 +535,8 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, { struct snd_pcm_runtime *runtime = substream->runtime; struct fsl_dma_private *dma_private = runtime->private_data; - struct ccsr_dma_channel __iomem *dma_channel = dma_private->dma_channel; dma_addr_t temp_addr; /* Pointer to next period */ - u64 temp_link; /* Pointer to next link descriptor */ - u32 mr; /* Temporary variable for MR register */ unsigned int i; @@ -490,8 +554,6 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, dma_private->dma_buf_next = dma_private->dma_buf_phys; /* - * Initialize each link descriptor. - * * The actual address in STX0 (destination for playback, source for * capture) is based on the sample size, but we don't know the sample * size in this function, so we'll have to adjust that later. See @@ -507,16 +569,11 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, * buffer itself. */ temp_addr = substream->dma_buffer.addr; - temp_link = dma_private->ld_buf_phys + - sizeof(struct fsl_dma_link_descriptor); for (i = 0; i < NUM_DMA_LINKS; i++) { struct fsl_dma_link_descriptor *link = &dma_private->link[i]; link->count = cpu_to_be32(period_size); - link->source_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); - link->dest_attr = cpu_to_be32(CCSR_DMA_ATR_SNOOP); - link->next = cpu_to_be64(temp_link); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) link->source_addr = cpu_to_be32(temp_addr); @@ -524,51 +581,7 @@ static int fsl_dma_hw_params(struct snd_pcm_substream *substream, link->dest_addr = cpu_to_be32(temp_addr); temp_addr += period_size; - temp_link += sizeof(struct fsl_dma_link_descriptor); } - /* The last link descriptor points to the first */ - dma_private->link[i - 1].next = cpu_to_be64(dma_private->ld_buf_phys); - - /* Tell the DMA controller where the first link descriptor is */ - out_be32(&dma_channel->clndar, - CCSR_DMA_CLNDAR_ADDR(dma_private->ld_buf_phys)); - out_be32(&dma_channel->eclndar, - CCSR_DMA_ECLNDAR_ADDR(dma_private->ld_buf_phys)); - - /* The manual says the BCR must be clear before enabling EMP */ - out_be32(&dma_channel->bcr, 0); - - /* - * Program the mode register for interrupts, external master control, - * and source/destination hold. Also clear the Channel Abort bit. - */ - mr = in_be32(&dma_channel->mr) & - ~(CCSR_DMA_MR_CA | CCSR_DMA_MR_DAHE | CCSR_DMA_MR_SAHE); - - /* - * We want External Master Start and External Master Pause enabled, - * because the SSI is controlling the DMA controller. We want the DMA - * controller to be set up in advance, and then we signal only the SSI - * to start transfering. - * - * We want End-Of-Segment Interrupts enabled, because this will generate - * an interrupt at the end of each segment (each link descriptor - * represents one segment). Each DMA segment is the same thing as an - * ALSA period, so this is how we get an interrupt at the end of every - * period. - * - * We want Error Interrupt enabled, so that we can get an error if - * the DMA controller is mis-programmed somehow. - */ - mr |= CCSR_DMA_MR_EOSIE | CCSR_DMA_MR_EIE | CCSR_DMA_MR_EMP_EN | - CCSR_DMA_MR_EMS_EN; - - /* For playback, we want the destination address to be held. For - capture, set the source address to be held. */ - mr |= (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? - CCSR_DMA_MR_DAHE : CCSR_DMA_MR_SAHE; - - out_be32(&dma_channel->mr, mr); return 0; } -- GitLab From 9b3cbf725fb98733976fd02e2e557f0ae3028df0 Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Mon, 4 Aug 2008 12:02:28 +0900 Subject: [PATCH 0687/1024] [IA64] pv_ops: fix ivt.S paravirtualization Recent kernels are not booting on some HP systems (though it does boot on others). James and Willy reported the problem. James did the bisection to find the commit that caused the problem: 498c5170472ff0c03a29d22dbd33225a0be038f4. [IA64] pvops: paravirtualize ivt.S Two instructions were wrongly paravirtualized such that _FROM_ macro had been used where _TO_ was intended Cc: James Bottomley Cc: "Wilcox, Matthew R" Signed-off-by: Isaku Yamahata Signed-off-by: Tony Luck --- arch/ia64/kernel/ivt.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index c39627df3cd..416a952b19b 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -1243,11 +1243,11 @@ ENTRY(speculation_vector) add r17=r17,r18 // now add the offset ;; - MOV_FROM_IIP(r17) + MOV_TO_IIP(r17, r19) dep r16=0,r16,41,2 // clear EI ;; - MOV_FROM_IPSR(p0, r16) + MOV_TO_IPSR(p0, r16, r19) ;; RFI -- GitLab From 3f44675439b136d51179d31eb5a498383cb38624 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 4 Aug 2008 11:02:14 -0700 Subject: [PATCH 0688/1024] RDMA/cma: Remove padding arrays by using struct sockaddr_storage There are a few places where the RDMA CM code handles IPv6 by doing struct sockaddr addr; u8 pad[sizeof(struct sockaddr_in6) - sizeof(struct sockaddr)]; This is fragile and ugly; handle this in a better way with just struct sockaddr_storage addr; [ Also roll in patch from Aleksey Senin to switch to struct sockaddr_storage and get rid of padding arrays in struct rdma_addr. ] Signed-off-by: Roland Dreier --- drivers/infiniband/core/cma.c | 37 +++++++++++++++++----------------- drivers/infiniband/core/ucma.c | 14 ++++++------- include/rdma/rdma_cm.h | 8 ++------ 3 files changed, 26 insertions(+), 33 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index e980ff3335d..d951896ff7f 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -155,9 +155,7 @@ struct cma_multicast { } multicast; struct list_head list; void *context; - struct sockaddr addr; - u8 pad[sizeof(struct sockaddr_in6) - - sizeof(struct sockaddr)]; + struct sockaddr_storage addr; }; struct cma_work { @@ -786,8 +784,8 @@ static void cma_cancel_operation(struct rdma_id_private *id_priv, cma_cancel_route(id_priv); break; case CMA_LISTEN: - if (cma_any_addr(&id_priv->id.route.addr.src_addr) && - !id_priv->cma_dev) + if (cma_any_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr) + && !id_priv->cma_dev) cma_cancel_listens(id_priv); break; default: @@ -1026,7 +1024,7 @@ static struct rdma_id_private *cma_new_conn_id(struct rdma_cm_id *listen_id, rt->path_rec[1] = *ib_event->param.req_rcvd.alternate_path; ib_addr_set_dgid(&rt->addr.dev_addr, &rt->path_rec[0].dgid); - ret = rdma_translate_ip(&id->route.addr.src_addr, + ret = rdma_translate_ip((struct sockaddr *) &id->route.addr.src_addr, &id->route.addr.dev_addr); if (ret) goto destroy_id; @@ -1064,7 +1062,7 @@ static struct rdma_id_private *cma_new_udp_id(struct rdma_cm_id *listen_id, cma_save_net_info(&id->route.addr, &listen_id->route.addr, ip_ver, port, src, dst); - ret = rdma_translate_ip(&id->route.addr.src_addr, + ret = rdma_translate_ip((struct sockaddr *) &id->route.addr.src_addr, &id->route.addr.dev_addr); if (ret) goto err; @@ -1377,7 +1375,7 @@ static int cma_ib_listen(struct rdma_id_private *id_priv) if (IS_ERR(id_priv->cm_id.ib)) return PTR_ERR(id_priv->cm_id.ib); - addr = &id_priv->id.route.addr.src_addr; + addr = (struct sockaddr *) &id_priv->id.route.addr.src_addr; svc_id = cma_get_service_id(id_priv->id.ps, addr); if (cma_any_addr(addr)) ret = ib_cm_listen(id_priv->cm_id.ib, svc_id, 0, NULL); @@ -1443,7 +1441,7 @@ static void cma_listen_on_dev(struct rdma_id_private *id_priv, dev_id_priv->state = CMA_ADDR_BOUND; memcpy(&id->route.addr.src_addr, &id_priv->id.route.addr.src_addr, - ip_addr_size(&id_priv->id.route.addr.src_addr)); + ip_addr_size((struct sockaddr *) &id_priv->id.route.addr.src_addr)); cma_attach_to_dev(dev_id_priv, cma_dev); list_add_tail(&dev_id_priv->listen_list, &id_priv->listen_list); @@ -1563,13 +1561,14 @@ static int cma_query_ib_route(struct rdma_id_private *id_priv, int timeout_ms, path_rec.pkey = cpu_to_be16(ib_addr_get_pkey(&addr->dev_addr)); path_rec.numb_path = 1; path_rec.reversible = 1; - path_rec.service_id = cma_get_service_id(id_priv->id.ps, &addr->dst_addr); + path_rec.service_id = cma_get_service_id(id_priv->id.ps, + (struct sockaddr *) &addr->dst_addr); comp_mask = IB_SA_PATH_REC_DGID | IB_SA_PATH_REC_SGID | IB_SA_PATH_REC_PKEY | IB_SA_PATH_REC_NUMB_PATH | IB_SA_PATH_REC_REVERSIBLE | IB_SA_PATH_REC_SERVICE_ID; - if (addr->src_addr.sa_family == AF_INET) { + if (addr->src_addr.ss_family == AF_INET) { path_rec.qos_class = cpu_to_be16((u16) id_priv->tos); comp_mask |= IB_SA_PATH_REC_QOS_CLASS; } else { @@ -1848,7 +1847,7 @@ static int cma_resolve_loopback(struct rdma_id_private *id_priv) ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr, &gid); ib_addr_set_dgid(&id_priv->id.route.addr.dev_addr, &gid); - if (cma_zero_addr(&id_priv->id.route.addr.src_addr)) { + if (cma_zero_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr)) { src_in = (struct sockaddr_in *)&id_priv->id.route.addr.src_addr; dst_in = (struct sockaddr_in *)&id_priv->id.route.addr.dst_addr; src_in->sin_family = dst_in->sin_family; @@ -1897,7 +1896,7 @@ int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr, if (cma_any_addr(dst_addr)) ret = cma_resolve_loopback(id_priv); else - ret = rdma_resolve_ip(&addr_client, &id->route.addr.src_addr, + ret = rdma_resolve_ip(&addr_client, (struct sockaddr *) &id->route.addr.src_addr, dst_addr, &id->route.addr.dev_addr, timeout_ms, addr_handler, id_priv); if (ret) @@ -2021,11 +2020,11 @@ static int cma_use_port(struct idr *ps, struct rdma_id_private *id_priv) * We don't support binding to any address if anyone is bound to * a specific address on the same port. */ - if (cma_any_addr(&id_priv->id.route.addr.src_addr)) + if (cma_any_addr((struct sockaddr *) &id_priv->id.route.addr.src_addr)) return -EADDRNOTAVAIL; hlist_for_each_entry(cur_id, node, &bind_list->owners, node) { - if (cma_any_addr(&cur_id->id.route.addr.src_addr)) + if (cma_any_addr((struct sockaddr *) &cur_id->id.route.addr.src_addr)) return -EADDRNOTAVAIL; cur_sin = (struct sockaddr_in *) &cur_id->id.route.addr.src_addr; @@ -2060,7 +2059,7 @@ static int cma_get_port(struct rdma_id_private *id_priv) } mutex_lock(&lock); - if (cma_any_port(&id_priv->id.route.addr.src_addr)) + if (cma_any_port((struct sockaddr *) &id_priv->id.route.addr.src_addr)) ret = cma_alloc_any_port(ps, id_priv); else ret = cma_use_port(ps, id_priv); @@ -2232,7 +2231,7 @@ static int cma_resolve_ib_udp(struct rdma_id_private *id_priv, req.path = route->path_rec; req.service_id = cma_get_service_id(id_priv->id.ps, - &route->addr.dst_addr); + (struct sockaddr *) &route->addr.dst_addr); req.timeout_ms = 1 << (CMA_CM_RESPONSE_TIMEOUT - 8); req.max_cm_retries = CMA_MAX_CM_RETRIES; @@ -2283,7 +2282,7 @@ static int cma_connect_ib(struct rdma_id_private *id_priv, req.alternate_path = &route->path_rec[1]; req.service_id = cma_get_service_id(id_priv->id.ps, - &route->addr.dst_addr); + (struct sockaddr *) &route->addr.dst_addr); req.qp_num = id_priv->qp_num; req.qp_type = IB_QPT_RC; req.starting_psn = id_priv->seq_num; @@ -2667,7 +2666,7 @@ static int cma_join_ib_multicast(struct rdma_id_private *id_priv, if (ret) return ret; - cma_set_mgid(id_priv, &mc->addr, &rec.mgid); + cma_set_mgid(id_priv, (struct sockaddr *) &mc->addr, &rec.mgid); if (id_priv->id.ps == RDMA_PS_UDP) rec.qkey = cpu_to_be32(RDMA_UDP_QKEY); ib_addr_get_sgid(dev_addr, &rec.port_gid); diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index b41dd26bbfa..3ddacf39b7b 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -81,9 +81,7 @@ struct ucma_multicast { u64 uid; struct list_head list; - struct sockaddr addr; - u8 pad[sizeof(struct sockaddr_in6) - - sizeof(struct sockaddr)]; + struct sockaddr_storage addr; }; struct ucma_event { @@ -603,11 +601,11 @@ static ssize_t ucma_query_route(struct ucma_file *file, return PTR_ERR(ctx); memset(&resp, 0, sizeof resp); - addr = &ctx->cm_id->route.addr.src_addr; + addr = (struct sockaddr *) &ctx->cm_id->route.addr.src_addr; memcpy(&resp.src_addr, addr, addr->sa_family == AF_INET ? sizeof(struct sockaddr_in) : sizeof(struct sockaddr_in6)); - addr = &ctx->cm_id->route.addr.dst_addr; + addr = (struct sockaddr *) &ctx->cm_id->route.addr.dst_addr; memcpy(&resp.dst_addr, addr, addr->sa_family == AF_INET ? sizeof(struct sockaddr_in) : sizeof(struct sockaddr_in6)); @@ -913,7 +911,7 @@ static ssize_t ucma_join_multicast(struct ucma_file *file, mc->uid = cmd.uid; memcpy(&mc->addr, &cmd.addr, sizeof cmd.addr); - ret = rdma_join_multicast(ctx->cm_id, &mc->addr, mc); + ret = rdma_join_multicast(ctx->cm_id, (struct sockaddr *) &mc->addr, mc); if (ret) goto err2; @@ -929,7 +927,7 @@ static ssize_t ucma_join_multicast(struct ucma_file *file, return 0; err3: - rdma_leave_multicast(ctx->cm_id, &mc->addr); + rdma_leave_multicast(ctx->cm_id, (struct sockaddr *) &mc->addr); ucma_cleanup_mc_events(mc); err2: mutex_lock(&mut); @@ -975,7 +973,7 @@ static ssize_t ucma_leave_multicast(struct ucma_file *file, goto out; } - rdma_leave_multicast(mc->ctx->cm_id, &mc->addr); + rdma_leave_multicast(mc->ctx->cm_id, (struct sockaddr *) &mc->addr); mutex_lock(&mc->ctx->file->mut); ucma_cleanup_mc_events(mc); list_del(&mc->list); diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h index df7faf09d66..c6b2962315b 100644 --- a/include/rdma/rdma_cm.h +++ b/include/rdma/rdma_cm.h @@ -71,12 +71,8 @@ enum rdma_port_space { }; struct rdma_addr { - struct sockaddr src_addr; - u8 src_pad[sizeof(struct sockaddr_in6) - - sizeof(struct sockaddr)]; - struct sockaddr dst_addr; - u8 dst_pad[sizeof(struct sockaddr_in6) - - sizeof(struct sockaddr)]; + struct sockaddr_storage src_addr; + struct sockaddr_storage dst_addr; struct rdma_dev_addr dev_addr; }; -- GitLab From 5f0f66b022ba607db0a083bf5cc13e4a4336e366 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 4 Aug 2008 11:04:42 -0700 Subject: [PATCH 0689/1024] RDMA/cxgb3: Fix QP capabilities - Set the stag0 and fastreg capability bits only for kernel qps. - QP_PRIV flag is no longer used, so don't set it. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/iwch_qp.c | 23 +++++++---------------- 1 file changed, 7 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 9a3be3a9d5d..893971612ed 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -879,20 +879,13 @@ static int rdma_init(struct iwch_dev *rhp, struct iwch_qp *qhp, (qhp->attr.mpa_attr.xmit_marker_enabled << 1) | (qhp->attr.mpa_attr.crc_enabled << 2); - /* - * XXX - The IWCM doesn't quite handle getting these - * attrs set before going into RTS. For now, just turn - * them on always... - */ -#if 0 - init_attr.qpcaps = qhp->attr.enableRdmaRead | - (qhp->attr.enableRdmaWrite << 1) | - (qhp->attr.enableBind << 2) | - (qhp->attr.enable_stag0_fastreg << 3) | - (qhp->attr.enable_stag0_fastreg << 4); -#else - init_attr.qpcaps = 0x1f; -#endif + init_attr.qpcaps = uP_RI_QP_RDMA_READ_ENABLE | + uP_RI_QP_RDMA_WRITE_ENABLE | + uP_RI_QP_BIND_ENABLE; + if (!qhp->ibqp.uobject) + init_attr.qpcaps |= uP_RI_QP_STAG0_ENABLE | + uP_RI_QP_FAST_REGISTER_ENABLE; + init_attr.tcp_emss = qhp->ep->emss; init_attr.ord = qhp->attr.max_ord; init_attr.ird = qhp->attr.max_ird; @@ -900,8 +893,6 @@ static int rdma_init(struct iwch_dev *rhp, struct iwch_qp *qhp, init_attr.qp_dma_size = (1UL << qhp->wq.size_log2); init_attr.rqe_count = iwch_rqes_posted(qhp); init_attr.flags = qhp->attr.mpa_attr.initiator ? MPA_INITIATOR : 0; - if (!qhp->ibqp.uobject) - init_attr.flags |= PRIV_QP; if (peer2peer) { init_attr.rtr_type = RTR_READ; if (init_attr.ord == 0 && qhp->attr.mpa_attr.initiator) -- GitLab From 1c355a6e80fd08e623416138631e240f431385f2 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 4 Aug 2008 11:05:43 -0700 Subject: [PATCH 0690/1024] RDMA/cxgb3: Fix up MW access rights - MWs don't have local read/write permissions. - Set the MW_BIND enabled bit if a MR has MW_BIND access. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/cxio_hal.c | 6 +++--- drivers/infiniband/hw/cxgb3/iwch_provider.h | 7 +++++++ drivers/infiniband/hw/cxgb3/iwch_qp.c | 2 +- 3 files changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c index f6d5747153a..4dcf08b3fd8 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.c +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c @@ -725,9 +725,9 @@ static int __cxio_tpt_op(struct cxio_rdev *rdev_p, u32 reset_tpt_entry, V_TPT_STAG_TYPE(type) | V_TPT_PDID(pdid)); BUG_ON(page_size >= 28); tpt.flags_pagesize_qpid = cpu_to_be32(V_TPT_PERM(perm) | - F_TPT_MW_BIND_ENABLE | - V_TPT_ADDR_TYPE((zbva ? TPT_ZBTO : TPT_VATO)) | - V_TPT_PAGE_SIZE(page_size)); + ((perm & TPT_MW_BIND) ? F_TPT_MW_BIND_ENABLE : 0) | + V_TPT_ADDR_TYPE((zbva ? TPT_ZBTO : TPT_VATO)) | + V_TPT_PAGE_SIZE(page_size)); tpt.rsvd_pbl_addr = reset_tpt_entry ? 0 : cpu_to_be32(V_TPT_PBL_ADDR(PBL_OFF(rdev_p, pbl_addr)>>3)); tpt.len = cpu_to_be32(len); diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.h b/drivers/infiniband/hw/cxgb3/iwch_provider.h index f5ceca05c43..a237d49bdcc 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.h +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.h @@ -293,9 +293,16 @@ static inline u32 iwch_ib_to_tpt_access(int acc) return (acc & IB_ACCESS_REMOTE_WRITE ? TPT_REMOTE_WRITE : 0) | (acc & IB_ACCESS_REMOTE_READ ? TPT_REMOTE_READ : 0) | (acc & IB_ACCESS_LOCAL_WRITE ? TPT_LOCAL_WRITE : 0) | + (acc & IB_ACCESS_MW_BIND ? TPT_MW_BIND : 0) | TPT_LOCAL_READ; } +static inline u32 iwch_ib_to_tpt_bind_access(int acc) +{ + return (acc & IB_ACCESS_REMOTE_WRITE ? TPT_REMOTE_WRITE : 0) | + (acc & IB_ACCESS_REMOTE_READ ? TPT_REMOTE_READ : 0); +} + enum iwch_mmid_state { IWCH_STAG_STATE_VALID, IWCH_STAG_STATE_INVALID diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 893971612ed..3e4585c2318 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -565,7 +565,7 @@ int iwch_bind_mw(struct ib_qp *qp, wqe->bind.type = TPT_VATO; /* TBD: check perms */ - wqe->bind.perms = iwch_ib_to_tpt_access(mw_bind->mw_access_flags); + wqe->bind.perms = iwch_ib_to_tpt_bind_access(mw_bind->mw_access_flags); wqe->bind.mr_stag = cpu_to_be32(mw_bind->mr->lkey); wqe->bind.mw_stag = cpu_to_be32(mw->rkey); wqe->bind.mw_len = cpu_to_be32(mw_bind->length); -- GitLab From 94567ef16bf38e98a7de214694d327feb3ec42d4 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Mon, 4 Aug 2008 11:06:16 -0700 Subject: [PATCH 0691/1024] [IA64] Cleanup generated file not ignored by .gitignore arch/ia64/kernel/vmlinux.lds is a generated file. Tell git to ignore it. Signed-off-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/kernel/.gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/ia64/kernel/.gitignore b/arch/ia64/kernel/.gitignore index 98307759a3b..21cb0da5ded 100644 --- a/arch/ia64/kernel/.gitignore +++ b/arch/ia64/kernel/.gitignore @@ -1 +1,2 @@ gate.lds +vmlinux.lds -- GitLab From be43324d8b316fe83a7b4027334f2825f1121c2c Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 4 Aug 2008 11:08:37 -0700 Subject: [PATCH 0692/1024] RDMA/cxgb3: Fix deadlock initializing iw_cxgb3 device Running 'ifconfig up' on the cxgb3 interface with iw_cxgb3 loaded causes a deadlock. The rtnl lock is already held in this path. The function fw_supports_fastreg() was introduced in 2.6.27 to conditionally set the IB_DEVICE_MEM_MGT_EXTENSIONS bit iff the firmware was at 7.0 or greater, and this function also acquires the rtnl lock and which thus causes a deadlock. Further, if iw_cxgb3 is loaded _after_ the nic interface is brought up, then the deadlock does not occur and therefore fw_supports_fastreg() does need to grab the rtnl lock in that path. It turns out this code is all useless anyway. The low level driver will NOT allow the open if the firmware isn't 7.0, so iw_cxgb3 can always set the MEM_MGT_EXTENSIONS bit. Simplify... Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/iwch_provider.c | 28 +++------------------ 1 file changed, 3 insertions(+), 25 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index b89640aa6e1..eb778bfd6f6 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1187,28 +1187,6 @@ static ssize_t show_rev(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", iwch_dev->rdev.t3cdev_p->type); } -static int fw_supports_fastreg(struct iwch_dev *iwch_dev) -{ - struct ethtool_drvinfo info; - struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; - char *cp, *next; - unsigned fw_maj, fw_min; - - rtnl_lock(); - lldev->ethtool_ops->get_drvinfo(lldev, &info); - rtnl_unlock(); - - next = info.fw_version+1; - cp = strsep(&next, "."); - sscanf(cp, "%i", &fw_maj); - cp = strsep(&next, "."); - sscanf(cp, "%i", &fw_min); - - PDBG("%s maj %u min %u\n", __func__, fw_maj, fw_min); - - return fw_maj > 6 || (fw_maj == 6 && fw_min > 0); -} - static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, char *buf) { struct iwch_dev *iwch_dev = container_of(dev, struct iwch_dev, @@ -1325,12 +1303,12 @@ int iwch_register_device(struct iwch_dev *dev) memset(&dev->ibdev.node_guid, 0, sizeof(dev->ibdev.node_guid)); memcpy(&dev->ibdev.node_guid, dev->rdev.t3cdev_p->lldev->dev_addr, 6); dev->ibdev.owner = THIS_MODULE; - dev->device_cap_flags = IB_DEVICE_LOCAL_DMA_LKEY | IB_DEVICE_MEM_WINDOW; + dev->device_cap_flags = IB_DEVICE_LOCAL_DMA_LKEY | + IB_DEVICE_MEM_WINDOW | + IB_DEVICE_MEM_MGT_EXTENSIONS; /* cxgb3 supports STag 0. */ dev->ibdev.local_dma_lkey = 0; - if (fw_supports_fastreg(dev)) - dev->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS; dev->ibdev.uverbs_cmd_mask = (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) | -- GitLab From d1339df1f46d10e0396c1470f371b0d1b23295ba Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Sat, 2 Aug 2008 13:29:24 -0500 Subject: [PATCH 0693/1024] [IA64] Allow ia64 to CONFIG_NR_CPUS up to 4096 ia64 has compiled with NR_CPUS=4096 for a couple releases, just forgot to update Kconfig to allow it. Signed-off-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 451f2ffb137..977895893ed 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -321,10 +321,10 @@ config SMP If you don't know what to do here, say N. config NR_CPUS - int "Maximum number of CPUs (2-1024)" - range 2 1024 + int "Maximum number of CPUs (2-4096)" + range 2 4096 depends on SMP - default "1024" + default "4096" help You should set this to the number of CPUs in your system, but keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but -- GitLab From ac0af91ebcaedc1a9e1d2987ecbd22837924e6b9 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Sat, 2 Aug 2008 13:32:06 -0500 Subject: [PATCH 0694/1024] [IA64] update generic_defconfig for 2.6.27-rc1 This patch updates the generic_defconfig for 2.6.27-rc1 by simply doing a make oldconfig and holding down the carriage return. Signed-off-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/configs/generic_defconfig | 503 ++++++++++++++++------------ 1 file changed, 293 insertions(+), 210 deletions(-) diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 0210545e7f6..3ad1a464fd4 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -1,20 +1,16 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22 -# Thu Jul 19 13:55:32 2007 +# Linux kernel version: 2.6.27-rc1 +# Fri Aug 1 19:33:14 2008 # CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y @@ -23,20 +19,27 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=20 -# CONFIG_CPUSETS is not set +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -44,6 +47,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -53,12 +57,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y @@ -68,6 +90,8 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -81,6 +105,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Processor type and features @@ -91,12 +116,16 @@ CONFIG_ZONE_DMA=y CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_DMI=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y @@ -107,6 +136,7 @@ CONFIG_IA64_GENERIC=y # CONFIG_IA64_HP_ZX1 is not set # CONFIG_IA64_HP_ZX1_SWIOTLB is not set # CONFIG_IA64_SGI_SN2 is not set +# CONFIG_IA64_SGI_UV is not set # CONFIG_IA64_HP_SIM is not set # CONFIG_ITANIUM is not set CONFIG_MCKINLEY=y @@ -116,22 +146,26 @@ CONFIG_MCKINLEY=y CONFIG_IA64_PAGE_SIZE_64KB=y CONFIG_PGTABLE_3=y # CONFIG_PGTABLE_4 is not set +CONFIG_HZ=250 # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set -CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_IA64_L1_CACHE_SHIFT=7 CONFIG_IA64_CYCLONE=y CONFIG_IOSAPIC=y -# CONFIG_IA64_SGI_SN_XP is not set CONFIG_FORCE_MAX_ZONEORDER=17 +# CONFIG_VIRT_CPU_ACCOUNTING is not set CONFIG_SMP=y CONFIG_NR_CPUS=512 CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_SCHED_SMT is not set # CONFIG_PERMIT_BSP_REMOVE is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set @@ -141,6 +175,8 @@ CONFIG_DISCONTIGMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y @@ -148,6 +184,7 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y +CONFIG_MMU_NOTIFIER=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -162,12 +199,14 @@ CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y +CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y # CONFIG_IA64_MC_ERR_INJECT is not set CONFIG_SGI_SN=y # CONFIG_IA64_ESI is not set +# CONFIG_IA64_HP_AML_NFW is not set # # SN Devices @@ -179,6 +218,7 @@ CONFIG_CRASH_DUMP=y # # Firmware Drivers # +# CONFIG_FIRMWARE_MEMMAP is not set CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y CONFIG_DMIID=y @@ -189,14 +229,12 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y -CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set - -# -# ACPI (Advanced Configuration and Power Interface) Support -# CONFIG_ACPI=y CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m # CONFIG_ACPI_DOCK is not set @@ -204,9 +242,11 @@ CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y +# CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y +# CONFIG_ACPI_PCI_SLOT is not set CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m @@ -225,6 +265,7 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_FAKE is not set @@ -233,15 +274,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # CONFIG_HOTPLUG_PCI_SGI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set - -# -# Networking -# CONFIG_NET=y # @@ -254,6 +287,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -273,6 +307,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -280,8 +315,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -298,10 +331,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -309,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -330,9 +360,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -360,25 +393,35 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_SGI_IOC4=y # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_SGI_XP is not set +# CONFIG_HP_ILO is not set +CONFIG_SGI_GRU=m +# CONFIG_SGI_GRU_DEBUG is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_TIMINGS=y +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEFLOPPY=y CONFIG_BLK_DEV_IDESCSI=m @@ -390,25 +433,26 @@ CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEPNP is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -425,10 +469,7 @@ CONFIG_BLK_DEV_SGIIOC4=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -468,10 +509,8 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -481,6 +520,8 @@ CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -491,6 +532,7 @@ CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 @@ -505,6 +547,7 @@ CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m @@ -522,36 +565,52 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m -# CONFIG_DM_MULTIPATH_EMC is not set -# CONFIG_DM_MULTIPATH_RDAC is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_FC=m CONFIG_FUSION_SAS=y CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set @@ -569,13 +628,16 @@ CONFIG_TULIP=m # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set CONFIG_EEPRO100=m CONFIG_E100=m # CONFIG_FEALNX is not set @@ -583,17 +645,21 @@ CONFIG_E100=m # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -606,14 +672,20 @@ CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -621,6 +693,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -629,7 +702,6 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -637,8 +709,8 @@ CONFIG_NETDEV_10000=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y @@ -660,7 +732,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -709,9 +780,11 @@ CONFIG_GAMEPORT=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set @@ -719,15 +792,16 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set -# CONFIG_MOXA_SMARTIO_NEW is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set # CONFIG_RIO is not set # CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set CONFIG_SGI_SNSC=y CONFIG_SGI_TIOCX=y CONFIG_SGI_MBCS=m @@ -759,76 +833,100 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_EFI_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -CONFIG_AGP=m -CONFIG_AGP_I460=m -CONFIG_AGP_HP_ZX1=m -CONFIG_AGP_SGI_TIOCA=m -CONFIG_DRM=m -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m -# CONFIG_DRM_VIA is not set -# CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y -# CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y # CONFIG_HANGCHECK_TIMER is not set CONFIG_MMTIMER=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_THERMAL=m +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # +CONFIG_AGP=m +CONFIG_AGP_I460=m +CONFIG_AGP_HP_ZX1=m +CONFIG_AGP_SGI_TIOCA=m +CONFIG_DRM=m +CONFIG_DRM_TDFX=m +CONFIG_DRM_R128=m +CONFIG_DRM_RADEON=m +CONFIG_DRM_MGA=m +CONFIG_DRM_SIS=m +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support @@ -836,15 +934,7 @@ CONFIG_DAB=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -862,22 +952,18 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y CONFIG_SND_DUMMY=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -886,10 +972,12 @@ CONFIG_SND_MPU401=m # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set CONFIG_SND_CS4281=m CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y @@ -912,10 +1000,10 @@ CONFIG_SND_EMU10K1=m # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set CONFIG_SND_FM801=m -# CONFIG_SND_FM801_TEA575X_BOOL is not set # CONFIG_SND_HDA_INTEL is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set @@ -933,29 +1021,19 @@ CONFIG_SND_FM801=m # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# USB devices -# +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -976,6 +1054,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -984,17 +1063,17 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1008,6 +1087,7 @@ CONFIG_USB_UHCI_HCD=m # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1027,7 +1107,9 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1040,10 +1122,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1069,65 +1147,30 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# +# CONFIG_ACCESSIBILITY is not set CONFIG_INFINIBAND=m # CONFIG_INFINIBAND_USER_MAD is not set # CONFIG_INFINIBAND_USER_ACCESS is not set CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y +# CONFIG_INFINIBAND_IPATH is not set # CONFIG_INFINIBAND_AMSO1100 is not set # CONFIG_MLX4_INFINIBAND is not set +# CONFIG_INFINIBAND_NES is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_CM is not set CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set # CONFIG_INFINIBAND_SRP is not set # CONFIG_INFINIBAND_ISER is not set - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_MSPEC is not set @@ -1145,7 +1188,6 @@ CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set @@ -1157,17 +1199,15 @@ CONFIG_REISERFS_FS_SECURITY=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1205,7 +1245,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1220,32 +1259,30 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_BIND34 is not set -CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_SUNRPC_XPRT_RDMA=m +CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y @@ -1281,10 +1318,6 @@ CONFIG_SGI_PARTITION=y # CONFIG_KARMA_PARTITION is not set CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1325,19 +1358,20 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set +CONFIG_HAVE_KVM=y +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set @@ -1357,17 +1391,13 @@ CONFIG_IRQ_PER_CPU=y # CONFIG_HP_SIMSERIAL is not set # CONFIG_HP_SIMSCSI is not set -# -# Instrumentation Support -# -# CONFIG_PROFILING is not set -# CONFIG_KPROBES is not set - # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1375,10 +1405,14 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1388,10 +1422,15 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set @@ -1405,41 +1444,85 @@ CONFIG_SYSVIPC_COMPAT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set -- GitLab From 70117b9e866b1fdf7e4e84ffb6f38a7b3e9702f8 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Mon, 4 Aug 2008 11:12:18 -0700 Subject: [PATCH 0695/1024] IB/ipath: Fix printk format warnings ipath_driver.c:1260: warning: format '%Lx' expects type 'long long unsigned int', but argument 6 has type 'long unsigned int' ipath_driver.c:1459: warning: format '%Lx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_intr.c:358: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:358: warning: format '%Lu' expects type 'long long unsigned int', but argument 6 has type 'u64' ipath_intr.c:1119: warning: format '%Lx' expects type 'long long unsigned int', but argument 5 has type 'u64' ipath_intr.c:1119: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:1123: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:1130: warning: format '%Lx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_iba7220.c:1032: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_iba7220.c:1045: warning: format '%llX' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_iba7220.c:2506: warning: format '%Lu' expects type 'long long unsigned int', but argument 4 has type 'u64' Signed-off-by: Alexander Beregalov Cc: Sean Hefty Cc: Hal Rosenstock Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_driver.c | 5 +++-- drivers/infiniband/hw/ipath/ipath_iba7220.c | 7 ++++--- drivers/infiniband/hw/ipath/ipath_intr.c | 12 ++++++++---- 3 files changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index daad09a4591..ad0aab60b05 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -1259,7 +1259,7 @@ reloop: */ ipath_cdbg(ERRPKT, "Error Pkt, but no eflags! egrbuf" " %x, len %x hdrq+%x rhf: %Lx\n", - etail, tlen, l, + etail, tlen, l, (unsigned long long) le64_to_cpu(*(__le64 *) rhf_addr)); if (ipath_debug & __IPATH_ERRPKTDBG) { u32 j, *d, dw = rsize-2; @@ -1457,7 +1457,8 @@ static void ipath_reset_availshadow(struct ipath_devdata *dd) 0xaaaaaaaaaaaaaaaaULL); /* All BUSY bits in qword */ if (oldval != dd->ipath_pioavailshadow[i]) ipath_dbg("shadow[%d] was %Lx, now %lx\n", - i, oldval, dd->ipath_pioavailshadow[i]); + i, (unsigned long long) oldval, + dd->ipath_pioavailshadow[i]); } spin_unlock_irqrestore(&ipath_pioavail_lock, flags); } diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c index fb70712ac85..85b2cd03c4e 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba7220.c +++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c @@ -1032,7 +1032,7 @@ static int ipath_7220_bringup_serdes(struct ipath_devdata *dd) ipath_cdbg(VERBOSE, "done: xgxs=%llx from %llx\n", (unsigned long long) ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig), - prev_val); + (unsigned long long) prev_val); guid = be64_to_cpu(dd->ipath_guid); @@ -1042,7 +1042,8 @@ static int ipath_7220_bringup_serdes(struct ipath_devdata *dd) ipath_dbg("No GUID for heartbeat, faking %llx\n", (unsigned long long)guid); } else - ipath_cdbg(VERBOSE, "Wrote %llX to HRTBT_GUID\n", guid); + ipath_cdbg(VERBOSE, "Wrote %llX to HRTBT_GUID\n", + (unsigned long long) guid); ipath_write_kreg(dd, dd->ipath_kregs->kr_hrtbt_guid, guid); return ret; } @@ -2505,7 +2506,7 @@ done: if (dd->ipath_flags & IPATH_IB_AUTONEG_INPROG) { ipath_dbg("Did not get to DDR INIT (%x) after %Lu msecs\n", ipath_ib_state(dd, dd->ipath_lastibcstat), - jiffies_to_msecs(jiffies)-startms); + (unsigned long long) jiffies_to_msecs(jiffies)-startms); dd->ipath_flags &= ~IPATH_IB_AUTONEG_INPROG; if (dd->ipath_autoneg_tries == IPATH_AUTONEG_TRIES) { dd->ipath_flags |= IPATH_IB_AUTONEG_FAILED; diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index 26900b3b7a4..6c21b4b5ec7 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -356,9 +356,10 @@ static void handle_e_ibstatuschanged(struct ipath_devdata *dd, dd->ipath_cregs->cr_iblinkerrrecovcnt); if (linkrecov != dd->ipath_lastlinkrecov) { ipath_dbg("IB linkrecov up %Lx (%s %s) recov %Lu\n", - ibcs, ib_linkstate(dd, ibcs), + (unsigned long long) ibcs, + ib_linkstate(dd, ibcs), ipath_ibcstatus_str[ltstate], - linkrecov); + (unsigned long long) linkrecov); /* and no more until active again */ dd->ipath_lastlinkrecov = 0; ipath_set_linkstate(dd, IPATH_IB_LINKDOWN); @@ -1118,9 +1119,11 @@ irqreturn_t ipath_intr(int irq, void *data) if (unlikely(istat & ~dd->ipath_i_bitsextant)) ipath_dev_err(dd, "interrupt with unknown interrupts %Lx set\n", + (unsigned long long) istat & ~dd->ipath_i_bitsextant); else if (istat & ~INFINIPATH_I_ERROR) /* errors do own printing */ - ipath_cdbg(VERBOSE, "intr stat=0x%Lx\n", istat); + ipath_cdbg(VERBOSE, "intr stat=0x%Lx\n", + (unsigned long long) istat); if (istat & INFINIPATH_I_ERROR) { ipath_stats.sps_errints++; @@ -1128,7 +1131,8 @@ irqreturn_t ipath_intr(int irq, void *data) dd->ipath_kregs->kr_errorstatus); if (!estat) dev_info(&dd->pcidev->dev, "error interrupt (%Lx), " - "but no error bits set!\n", istat); + "but no error bits set!\n", + (unsigned long long) istat); else if (estat == -1LL) /* * should we try clearing all, or hope next read -- GitLab From ceffacc1d6041392d1b47750b14bf6845c2372ab Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Sat, 2 Aug 2008 13:35:27 -0500 Subject: [PATCH 0696/1024] [IA64] update generic_defconfig to support sn2. This patch changes the generic_defconfig so it works on all sn2 platforms I have access to. There is only one support configuration which was not tested and that configuration is only a combination of two tested configurations. With this patchset applied, a generic kernel can be booted on either a RHEL 5.2, RHEL5.3, or SLES10 SP1 root and operate. All features needed by SGI's ProPack are also working. I have not tested all features of RHEL or SLES, but they do at least boot. Signed-off-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/configs/generic_defconfig | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 3ad1a464fd4..133089be5f2 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.27-rc1 -# Fri Aug 1 19:33:14 2008 +# Sat Aug 2 13:24:08 2008 # CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -23,10 +23,17 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=20 -# CONFIG_CGROUPS is not set +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set +# CONFIG_CGROUP_DEVICE is not set +CONFIG_CPUSETS=y # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUP_CPUACCT is not set +# CONFIG_RESOURCE_COUNTERS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_PROC_PID_CPUSET=y # CONFIG_RELAY is not set CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set @@ -130,6 +137,7 @@ CONFIG_DMI=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_IA64_UNCACHED_ALLOCATOR=y CONFIG_AUDIT_ARCH=y CONFIG_IA64_GENERIC=y # CONFIG_IA64_DIG is not set @@ -158,7 +166,7 @@ CONFIG_IOSAPIC=y CONFIG_FORCE_MAX_ZONEORDER=17 # CONFIG_VIRT_CPU_ACCOUNTING is not set CONFIG_SMP=y -CONFIG_NR_CPUS=512 +CONFIG_NR_CPUS=4096 CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -369,7 +377,8 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y @@ -403,7 +412,7 @@ CONFIG_MISC_DEVICES=y CONFIG_SGI_IOC4=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_SGI_XP is not set +CONFIG_SGI_XP=m # CONFIG_HP_ILO is not set CONFIG_SGI_GRU=m # CONFIG_SGI_GRU_DEBUG is not set @@ -1172,7 +1181,7 @@ CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set -# CONFIG_MSPEC is not set +CONFIG_MSPEC=m # # File systems @@ -1375,6 +1384,7 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_ALLOCATOR=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -- GitLab From 3351ab9b345ba5c2872acbf718cc631df72d3732 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Thu, 31 Jul 2008 07:52:50 -0500 Subject: [PATCH 0697/1024] [IA64] Eliminate trailing backquote in IA64_SGI_UV Eliminate trailing backquote in IA64_SGI_UV config. Signed-off-by: Jack Steiner Signed-off-by: Tony Luck --- arch/ia64/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 977895893ed..48e496fe1e7 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -171,8 +171,8 @@ config IA64_SGI_SN2 to select this option. If in doubt, select ia64 generic support instead. -config IA64_SGI_UV` - bool "SGI-UV`" +config IA64_SGI_UV + bool "SGI-UV" select NUMA select ACPI_NUMA select SWIOTLB -- GitLab From ca579617d81baf5865498eb5fae58e453ee77c2c Mon Sep 17 00:00:00 2001 From: Mohamed Abbas Date: Fri, 18 Jul 2008 13:52:57 +0800 Subject: [PATCH 0698/1024] iwlwifi: add power save to 5000 HW This patch adds support for power save for 5000 HW. Signed-off-by: Mohamed Abbas Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 13 ------------- drivers/net/wireless/iwlwifi/iwl-5000.c | 1 + drivers/net/wireless/iwlwifi/iwl-commands.h | 4 ++-- drivers/net/wireless/iwlwifi/iwl-core.h | 1 - drivers/net/wireless/iwlwifi/iwl-dev.h | 3 ++- drivers/net/wireless/iwlwifi/iwl-power.c | 18 ++++++++++++------ drivers/net/wireless/iwlwifi/iwl-power.h | 2 +- 7 files changed, 18 insertions(+), 24 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index ba2df1ba32d..ea23c762957 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -875,18 +875,6 @@ static int iwl4965_hw_set_hw_params(struct iwl_priv *priv) return 0; } -/* set card power command */ -static int iwl4965_set_power(struct iwl_priv *priv, - void *cmd) -{ - int ret = 0; - - ret = iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD, - sizeof(struct iwl4965_powertable_cmd), - cmd, NULL); - return ret; -} - static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res) { s32 sign = 1; @@ -2440,7 +2428,6 @@ static struct iwl_lib_ops iwl4965_lib = { .check_version = iwl4965_eeprom_check_version, .query_addr = iwlcore_eeprom_query_addr, }, - .set_power = iwl4965_set_power, .send_tx_power = iwl4965_send_tx_power, .update_chain_flags = iwl4965_update_chain_flags, .temperature = iwl4965_temperature_calib, diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 878d6193b23..f91c54b5ff5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1474,6 +1474,7 @@ static struct iwl_lib_ops iwl5000_lib = { .alive_notify = iwl5000_alive_notify, .send_tx_power = iwl5000_send_tx_power, .temperature = iwl5000_temperature, + .update_chain_flags = iwl4965_update_chain_flags, .apm_ops = { .init = iwl5000_apm_init, .reset = iwl5000_apm_reset, diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index e9bb1de0ce3..6f3555ffe52 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -1993,7 +1993,7 @@ struct iwl4965_spectrum_notification { *****************************************************************************/ /** - * struct iwl4965_powertable_cmd - Power Table Command + * struct iwl_powertable_cmd - Power Table Command * @flags: See below: * * POWER_TABLE_CMD = 0x77 (command, has simple generic response) @@ -2027,7 +2027,7 @@ struct iwl4965_spectrum_notification { #define IWL_POWER_PCI_PM_MSK __constant_cpu_to_le16(1 << 3) #define IWL_POWER_FAST_PD __constant_cpu_to_le16(1 << 4) -struct iwl4965_powertable_cmd { +struct iwl_powertable_cmd { __le16 flags; u8 keep_alive_seconds; u8 debug_flags; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index db66114f1e5..eaefa42f37c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -139,7 +139,6 @@ struct iwl_lib_ops { int (*set_pwr_src)(struct iwl_priv *priv, enum iwl_pwr_src src); } apm_ops; /* power */ - int (*set_power)(struct iwl_priv *priv, void *cmd); int (*send_tx_power) (struct iwl_priv *priv); void (*update_chain_flags)(struct iwl_priv *priv); void (*temperature) (struct iwl_priv *priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 4d789e353e3..010ed69e0e5 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -283,7 +283,7 @@ struct iwl_cmd { u32 val32; struct iwl4965_bt_cmd bt; struct iwl4965_rxon_time_cmd rxon_time; - struct iwl4965_powertable_cmd powertable; + struct iwl_powertable_cmd powertable; struct iwl_qosparam_cmd qosparam; struct iwl_tx_cmd tx; struct iwl4965_tx_beacon_cmd tx_beacon; @@ -590,6 +590,7 @@ extern unsigned int iwl4965_fill_beacon_frame(struct iwl_priv *priv, const u8 *dest, int left); extern void iwl4965_update_chain_flags(struct iwl_priv *priv); int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src); +extern int iwl4965_set_power(struct iwl_priv *priv, void *cmd); extern const u8 iwl_bcast_addr[ETH_ALEN]; diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c index 2e71803e09b..e3c71beb01e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.c +++ b/drivers/net/wireless/iwlwifi/iwl-power.c @@ -112,6 +112,13 @@ static struct iwl_power_vec_entry range_2[IWL_POWER_AC] = { {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0} }; +/* set card power command */ +static int iwl_set_power(struct iwl_priv *priv, void *cmd) +{ + return iwl_send_cmd_pdu_async(priv, POWER_TABLE_CMD, + sizeof(struct iwl_powertable_cmd), + cmd, NULL); +} /* decide the right power level according to association status * and battery status */ @@ -162,7 +169,7 @@ static int iwl_power_init_handle(struct iwl_priv *priv) if (ret != 0) return 0; else { - struct iwl4965_powertable_cmd *cmd; + struct iwl_powertable_cmd *cmd; IWL_DEBUG_POWER("adjust power command flags\n"); @@ -180,7 +187,7 @@ static int iwl_power_init_handle(struct iwl_priv *priv) /* adjust power command according to dtim period and power level*/ static int iwl_update_power_command(struct iwl_priv *priv, - struct iwl4965_powertable_cmd *cmd, + struct iwl_powertable_cmd *cmd, u16 mode) { int ret = 0, i; @@ -204,7 +211,7 @@ static int iwl_update_power_command(struct iwl_priv *priv, range = &pow_data->pwr_range_2[0]; period = pow_data->dtim_period; - memcpy(cmd, &range[mode].cmd, sizeof(struct iwl4965_powertable_cmd)); + memcpy(cmd, &range[mode].cmd, sizeof(struct iwl_powertable_cmd)); if (period == 0) { period = 1; @@ -280,7 +287,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh) if (!iwl_is_rfkill(priv) && !setting->power_disabled && ((setting->power_mode != final_mode) || refresh)) { - struct iwl4965_powertable_cmd cmd; + struct iwl_powertable_cmd cmd; if (final_mode != IWL_POWER_MODE_CAM) set_bit(STATUS_POWER_PMI, &priv->status); @@ -291,8 +298,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh) if (final_mode == IWL_POWER_INDEX_5) cmd.flags |= IWL_POWER_FAST_PD; - if (priv->cfg->ops->lib->set_power) - ret = priv->cfg->ops->lib->set_power(priv, &cmd); + ret = iwl_set_power(priv, &cmd); if (final_mode == IWL_POWER_MODE_CAM) clear_bit(STATUS_POWER_PMI, &priv->status); diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h index b066724a1c2..801f6143a42 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.h +++ b/drivers/net/wireless/iwlwifi/iwl-power.h @@ -46,7 +46,7 @@ struct iwl_priv; /* Power management (not Tx power) structures */ struct iwl_power_vec_entry { - struct iwl4965_powertable_cmd cmd; + struct iwl_powertable_cmd cmd; u8 no_dtim; }; -- GitLab From 298df1f62aa69881528bf0f1c3c14395bc447846 Mon Sep 17 00:00:00 2001 From: Esti Kummer Date: Fri, 18 Jul 2008 13:52:58 +0800 Subject: [PATCH 0699/1024] iwlwifi: corrects power_level in sysfs This patch corrects power_level in sysfs. Signed-off-by: Esti Kummer Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-power.c | 27 +++++---- drivers/net/wireless/iwlwifi/iwl-power.h | 31 +++++++--- drivers/net/wireless/iwlwifi/iwl4965-base.c | 63 +++++++-------------- 3 files changed, 58 insertions(+), 63 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c index e3c71beb01e..028e3053c0c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.c +++ b/drivers/net/wireless/iwlwifi/iwl-power.c @@ -82,7 +82,7 @@ /* default power management (not Tx power) table values */ /* for tim 0-10 */ -static struct iwl_power_vec_entry range_0[IWL_POWER_AC] = { +static struct iwl_power_vec_entry range_0[IWL_POWER_MAX] = { {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0}, @@ -93,7 +93,7 @@ static struct iwl_power_vec_entry range_0[IWL_POWER_AC] = { /* for tim = 3-10 */ -static struct iwl_power_vec_entry range_1[IWL_POWER_AC] = { +static struct iwl_power_vec_entry range_1[IWL_POWER_MAX] = { {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0}, @@ -103,7 +103,7 @@ static struct iwl_power_vec_entry range_1[IWL_POWER_AC] = { }; /* for tim > 11 */ -static struct iwl_power_vec_entry range_2[IWL_POWER_AC] = { +static struct iwl_power_vec_entry range_2[IWL_POWER_MAX] = { {{NOSLP, SLP_TOUT(0), SLP_TOUT(0), SLP_VEC(0, 0, 0, 0, 0)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0}, {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0}, @@ -124,7 +124,7 @@ static int iwl_set_power(struct iwl_priv *priv, void *cmd) */ static u16 iwl_get_auto_power_mode(struct iwl_priv *priv) { - u16 mode = priv->power_data.user_power_setting; + u16 mode; switch (priv->power_data.user_power_setting) { case IWL_POWER_AUTO: @@ -136,12 +136,16 @@ static u16 iwl_get_auto_power_mode(struct iwl_priv *priv) else mode = IWL_POWER_ON_AC_DISASSOC; break; + /* FIXME: remove battery and ac from here */ case IWL_POWER_BATTERY: mode = IWL_POWER_INDEX_3; break; case IWL_POWER_AC: mode = IWL_POWER_MODE_CAM; break; + default: + mode = priv->power_data.user_power_setting; + break; } return mode; } @@ -151,7 +155,7 @@ static int iwl_power_init_handle(struct iwl_priv *priv) { int ret = 0, i; struct iwl_power_mgr *pow_data; - int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_AC; + int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_MAX; u16 pci_pm; IWL_DEBUG_POWER("Initialize power \n"); @@ -173,7 +177,7 @@ static int iwl_power_init_handle(struct iwl_priv *priv) IWL_DEBUG_POWER("adjust power command flags\n"); - for (i = 0; i < IWL_POWER_AC; i++) { + for (i = 0; i < IWL_POWER_MAX; i++) { cmd = &pow_data->pwr_range_0[i].cmd; if (pci_pm & 0x1) @@ -265,17 +269,18 @@ int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh) * else user level */ switch (setting->system_power_setting) { - case IWL_POWER_AUTO: + case IWL_POWER_SYS_AUTO: final_mode = iwl_get_auto_power_mode(priv); break; - case IWL_POWER_BATTERY: + case IWL_POWER_SYS_BATTERY: final_mode = IWL_POWER_INDEX_3; break; - case IWL_POWER_AC: + case IWL_POWER_SYS_AC: final_mode = IWL_POWER_MODE_CAM; break; default: - final_mode = setting->system_power_setting; + final_mode = IWL_POWER_INDEX_3; + WARN_ON(1); } if (setting->critical_power_setting > final_mode) @@ -394,7 +399,7 @@ void iwl_power_initialize(struct iwl_priv *priv) iwl_power_init_handle(priv); priv->power_data.user_power_setting = IWL_POWER_AUTO; priv->power_data.power_disabled = 0; - priv->power_data.system_power_setting = IWL_POWER_AUTO; + priv->power_data.system_power_setting = IWL_POWER_SYS_AUTO; priv->power_data.is_battery_active = 0; priv->power_data.power_disabled = 0; priv->power_data.critical_power_setting = 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h index 801f6143a42..abcbbf96a84 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.h +++ b/drivers/net/wireless/iwlwifi/iwl-power.h @@ -33,12 +33,25 @@ struct iwl_priv; -#define IWL_POWER_MODE_CAM 0x00 /* Continuously Aware Mode, always on */ -#define IWL_POWER_INDEX_3 0x03 -#define IWL_POWER_INDEX_5 0x05 -#define IWL_POWER_AC 0x06 -#define IWL_POWER_BATTERY 0x07 -#define IWL_POWER_AUTO 0x08 +enum { + IWL_POWER_MODE_CAM, /* Continuously Aware Mode, always on */ + IWL_POWER_INDEX_1, + IWL_POWER_INDEX_2, + IWL_POWER_INDEX_3, + IWL_POWER_INDEX_4, + IWL_POWER_INDEX_5, + IWL_POWER_AUTO, + IWL_POWER_MAX = IWL_POWER_AUTO, + IWL_POWER_AC, + IWL_POWER_BATTERY, +}; + +enum { + IWL_POWER_SYS_AUTO, + IWL_POWER_SYS_AC, + IWL_POWER_SYS_BATTERY, +}; + #define IWL_POWER_LIMIT 0x08 #define IWL_POWER_MASK 0x0F #define IWL_POWER_ENABLED 0x10 @@ -52,9 +65,9 @@ struct iwl_power_vec_entry { struct iwl_power_mgr { spinlock_t lock; - struct iwl_power_vec_entry pwr_range_0[IWL_POWER_AC]; - struct iwl_power_vec_entry pwr_range_1[IWL_POWER_AC]; - struct iwl_power_vec_entry pwr_range_2[IWL_POWER_AC]; + struct iwl_power_vec_entry pwr_range_0[IWL_POWER_MAX]; + struct iwl_power_vec_entry pwr_range_1[IWL_POWER_MAX]; + struct iwl_power_vec_entry pwr_range_2[IWL_POWER_MAX]; u32 dtim_period; /* final power level that used to calculate final power command */ u8 power_mode; diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 71f5da3fe5c..2001b09738f 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -3800,76 +3800,53 @@ static ssize_t store_power_level(struct device *d, const char *buf, size_t count) { struct iwl_priv *priv = dev_get_drvdata(d); - int rc; + int ret; int mode; mode = simple_strtoul(buf, NULL, 0); mutex_lock(&priv->mutex); if (!iwl_is_ready(priv)) { - rc = -EAGAIN; + ret = -EAGAIN; goto out; } - rc = iwl_power_set_user_mode(priv, mode); - if (rc) { + ret = iwl_power_set_user_mode(priv, mode); + if (ret) { IWL_DEBUG_MAC80211("failed setting power mode.\n"); goto out; } - rc = count; + ret = count; out: mutex_unlock(&priv->mutex); - return rc; + return ret; } -#define MAX_WX_STRING 80 - -/* Values are in microsecond */ -static const s32 timeout_duration[] = { - 350000, - 250000, - 75000, - 37000, - 25000, -}; -static const s32 period_duration[] = { - 400000, - 700000, - 1000000, - 1000000, - 1000000 -}; - static ssize_t show_power_level(struct device *d, struct device_attribute *attr, char *buf) { struct iwl_priv *priv = dev_get_drvdata(d); + int mode = priv->power_data.user_power_setting; + int system = priv->power_data.system_power_setting; int level = priv->power_data.power_mode; char *p = buf; - p += sprintf(p, "%d ", level); - switch (level) { - case IWL_POWER_MODE_CAM: - case IWL_POWER_AC: - p += sprintf(p, "(AC)"); + switch (system) { + case IWL_POWER_SYS_AUTO: + p += sprintf(p, "SYSTEM:auto"); break; - case IWL_POWER_BATTERY: - p += sprintf(p, "(BATTERY)"); + case IWL_POWER_SYS_AC: + p += sprintf(p, "SYSTEM:ac"); + break; + case IWL_POWER_SYS_BATTERY: + p += sprintf(p, "SYSTEM:battery"); break; - default: - p += sprintf(p, - "(Timeout %dms, Period %dms)", - timeout_duration[level - 1] / 1000, - period_duration[level - 1] / 1000); } -/* - if (!(priv->power_mode & IWL_POWER_ENABLED)) - p += sprintf(p, " OFF\n"); - else - p += sprintf(p, " \n"); -*/ - p += sprintf(p, " \n"); + + p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO)?"fixed":"auto"); + p += sprintf(p, "\tINDEX:%d", level); + p += sprintf(p, "\n"); return (p - buf + 1); } -- GitLab From 98f7dfd86cbbd377e2cbc293529681b914296f68 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Fri, 18 Jul 2008 13:52:59 +0800 Subject: [PATCH 0700/1024] mac80211: pass dtim_period to low level driver This patch adds the dtim_period in ieee80211_bss_conf, this allows the low level driver to know the dtim_period, and to plan power save accordingly. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 13 +++++++++++++ include/net/mac80211.h | 4 +++- net/mac80211/ieee80211_i.h | 1 + net/mac80211/mlme.c | 11 +++++++++++ 4 files changed, 28 insertions(+), 1 deletion(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index a1630ba0b87..7f4df7c7659 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -506,6 +506,19 @@ struct ieee80211_channel_sw_ie { u8 count; } __attribute__ ((packed)); +/** + * struct ieee80211_tim + * + * This structure refers to "Traffic Indication Map information element" + */ +struct ieee80211_tim_ie { + u8 dtim_count; + u8 dtim_period; + u8 bitmap_ctrl; + /* variable size: 1 - 251 bytes */ + u8 virtual_map[0]; +} __attribute__ ((packed)); + struct ieee80211_mgmt { __le16 frame_control; __le16 duration; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b52721008be..9d99f2e0a20 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -177,9 +177,10 @@ enum ieee80211_bss_change { * @aid: association ID number, valid only when @assoc is true * @use_cts_prot: use CTS protection * @use_short_preamble: use 802.11b short preamble + * @dtim_period: num of beacons before the next DTIM, for PSM * @timestamp: beacon timestamp * @beacon_int: beacon interval - * @assoc_capability: capabbilities taken from assoc resp + * @assoc_capability: capabilities taken from assoc resp * @assoc_ht: association in HT mode * @ht_conf: ht capabilities * @ht_bss_conf: ht extended capabilities @@ -191,6 +192,7 @@ struct ieee80211_bss_conf { /* erp related data */ bool use_cts_prot; bool use_short_preamble; + u8 dtim_period; u16 beacon_int; u16 assoc_capability; u64 timestamp; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index a2e200f9811..ec59345af65 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -82,6 +82,7 @@ struct ieee80211_sta_bss { u8 bssid[ETH_ALEN]; u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 dtim_period; u16 capability; /* host byte order */ enum ieee80211_band band; int freq; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index acb04133a95..591e6331c42 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -551,6 +551,7 @@ static void ieee80211_set_associated(struct net_device *dev, /* set timing information */ sdata->bss_conf.beacon_int = bss->beacon_int; sdata->bss_conf.timestamp = bss->timestamp; + sdata->bss_conf.dtim_period = bss->dtim_period; changed |= ieee80211_handle_bss_capability(sdata, bss); @@ -2688,6 +2689,16 @@ static void ieee80211_rx_bss_info(struct net_device *dev, bss->beacon_int = le16_to_cpu(mgmt->u.beacon.beacon_int); bss->capability = le16_to_cpu(mgmt->u.beacon.capab_info); + if (elems->tim) { + struct ieee80211_tim_ie *tim_ie = + (struct ieee80211_tim_ie *)elems->tim; + bss->dtim_period = tim_ie->dtim_period; + } + + /* set default value for buggy APs */ + if (!elems->tim || bss->dtim_period == 0) + bss->dtim_period = 1; + bss->supp_rates_len = 0; if (elems->supp_rates) { clen = IEEE80211_MAX_SUPP_RATES - bss->supp_rates_len; -- GitLab From ea95bba41e69c616bb1512cf59d22f33266b8568 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 18 Jul 2008 13:53:00 +0800 Subject: [PATCH 0701/1024] mac80211: make listen_interval be limited by low level driver This patch makes possible for a driver to specify maximal listen interval The possibility for user to configure listen interval is not implemented yet, currently the maximum provided by the driver or 1 is used. Mac80211 uses config handler to set listen interval for to the driver. Signed-off-by: Tomas Winkler Signed-off-by: Emmanuel Grumbach Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- include/net/mac80211.h | 9 ++++++++- net/mac80211/main.c | 5 +++++ net/mac80211/mlme.c | 6 ++++-- 3 files changed, 17 insertions(+), 3 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9d99f2e0a20..b397e4d984c 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -432,6 +432,7 @@ enum ieee80211_conf_flags { * @radio_enabled: when zero, driver is required to switch off the radio. * TODO make a flag * @beacon_int: beacon interval (TODO make interface config) + * @listen_interval: listen interval in units of beacon interval * @flags: configuration flags defined above * @power_level: requested transmit power (in dBm) * @max_antenna_gain: maximum antenna gain (in dBi) @@ -446,6 +447,7 @@ struct ieee80211_conf { int radio_enabled; int beacon_int; + u16 listen_interval; u32 flags; int power_level; int max_antenna_gain; @@ -787,6 +789,9 @@ enum ieee80211_hw_flags { * @max_signal: Maximum value for signal (rssi) in RX information, used * only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB * + * @max_listen_interval: max listen interval in units of beacon interval + * that HW supports + * * @queues: number of available hardware transmit queues for * data packets. WMM/QoS requires at least four, these * queues need to have configurable access parameters. @@ -814,7 +819,9 @@ struct ieee80211_hw { unsigned int extra_tx_headroom; int channel_change_time; int vif_data_size; - u16 queues, ampdu_queues; + u16 queues; + u16 ampdu_queues; + u16 max_listen_interval; s8 max_signal; }; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index a4c5b90de76..0c02c471bca 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1689,6 +1689,11 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) if (local->hw.conf.beacon_int < 10) local->hw.conf.beacon_int = 100; + if (local->hw.max_listen_interval == 0) + local->hw.max_listen_interval = 1; + + local->hw.conf.listen_interval = local->hw.max_listen_interval; + local->wstats_flags |= local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC | IEEE80211_HW_SIGNAL_DB | IEEE80211_HW_SIGNAL_DBM) ? diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 591e6331c42..779affd8b8f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -774,7 +774,8 @@ static void ieee80211_send_assoc(struct net_device *dev, mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT, IEEE80211_STYPE_REASSOC_REQ); mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab); - mgmt->u.reassoc_req.listen_interval = cpu_to_le16(1); + mgmt->u.reassoc_req.listen_interval = + cpu_to_le16(local->hw.conf.listen_interval); memcpy(mgmt->u.reassoc_req.current_ap, ifsta->prev_bssid, ETH_ALEN); } else { @@ -782,7 +783,8 @@ static void ieee80211_send_assoc(struct net_device *dev, mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT, IEEE80211_STYPE_ASSOC_REQ); mgmt->u.assoc_req.capab_info = cpu_to_le16(capab); - mgmt->u.assoc_req.listen_interval = cpu_to_le16(1); + mgmt->u.reassoc_req.listen_interval = + cpu_to_le16(local->hw.conf.listen_interval); } /* SSID */ -- GitLab From d783b061077f92af55244aef1df8780b0f46b5af Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 18 Jul 2008 13:53:02 +0800 Subject: [PATCH 0702/1024] iwlwifi: move iwl4965_mac_ampdu_action to iwl4965-base.c This patch moves iwl4965_mac_ampdu_action to iwl4965-base.c. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 33 ------------------- drivers/net/wireless/iwlwifi/iwl-dev.h | 4 --- drivers/net/wireless/iwlwifi/iwl4965-base.c | 35 ++++++++++++++++++++- 3 files changed, 34 insertions(+), 38 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index ea23c762957..3cc6f00d96c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2067,39 +2067,6 @@ static int iwl4965_txq_agg_enable(struct iwl_priv *priv, int txq_id, return 0; } -int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, - enum ieee80211_ampdu_mlme_action action, - const u8 *addr, u16 tid, u16 *ssn) -{ - struct iwl_priv *priv = hw->priv; - DECLARE_MAC_BUF(mac); - - IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n", - print_mac(mac, addr), tid); - - if (!(priv->cfg->sku & IWL_SKU_N)) - return -EACCES; - - switch (action) { - case IEEE80211_AMPDU_RX_START: - IWL_DEBUG_HT("start Rx\n"); - return iwl_rx_agg_start(priv, addr, tid, *ssn); - case IEEE80211_AMPDU_RX_STOP: - IWL_DEBUG_HT("stop Rx\n"); - return iwl_rx_agg_stop(priv, addr, tid); - case IEEE80211_AMPDU_TX_START: - IWL_DEBUG_HT("start Tx\n"); - return iwl_tx_agg_start(priv, addr, tid, ssn); - case IEEE80211_AMPDU_TX_STOP: - IWL_DEBUG_HT("stop Tx\n"); - return iwl_tx_agg_stop(priv, addr, tid); - default: - IWL_DEBUG_HT("unknown\n"); - return -EINVAL; - break; - } - return 0; -} static u16 iwl4965_get_hcmd_size(u8 cmd_id, u16 len) { diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 010ed69e0e5..d2d4beab82a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -643,10 +643,6 @@ struct iwl_priv; * Forward declare iwl-4965.c functions for iwl-base.c */ extern void iwl4965_rf_kill_ct_config(struct iwl_priv *priv); - -int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, - enum ieee80211_ampdu_mlme_action action, - const u8 *addr, u16 tid, u16 *ssn); int iwl4965_check_empty_hw_queue(struct iwl_priv *priv, int sta_id, u8 tid, int txq_id); diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 2001b09738f..a34280f65c1 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -65,7 +65,7 @@ * NOTE: DRV_NAME is defined in iwlwifi.h for use by iwl-debug.h and printk */ -#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link 4965AGN driver for Linux" +#define DRV_DESCRIPTION "Intel(R) Wireless WiFi Link AGN driver for Linux" #ifdef CONFIG_IWLWIFI_DEBUG #define VD "d" @@ -3345,6 +3345,39 @@ static int iwl4965_mac_conf_tx(struct ieee80211_hw *hw, u16 queue, return 0; } +static int iwl4965_mac_ampdu_action(struct ieee80211_hw *hw, + enum ieee80211_ampdu_mlme_action action, + const u8 *addr, u16 tid, u16 *ssn) +{ + struct iwl_priv *priv = hw->priv; + DECLARE_MAC_BUF(mac); + + IWL_DEBUG_HT("A-MPDU action on addr %s tid %d\n", + print_mac(mac, addr), tid); + + if (!(priv->cfg->sku & IWL_SKU_N)) + return -EACCES; + + switch (action) { + case IEEE80211_AMPDU_RX_START: + IWL_DEBUG_HT("start Rx\n"); + return iwl_rx_agg_start(priv, addr, tid, *ssn); + case IEEE80211_AMPDU_RX_STOP: + IWL_DEBUG_HT("stop Rx\n"); + return iwl_rx_agg_stop(priv, addr, tid); + case IEEE80211_AMPDU_TX_START: + IWL_DEBUG_HT("start Tx\n"); + return iwl_tx_agg_start(priv, addr, tid, ssn); + case IEEE80211_AMPDU_TX_STOP: + IWL_DEBUG_HT("stop Tx\n"); + return iwl_tx_agg_stop(priv, addr, tid); + default: + IWL_DEBUG_HT("unknown\n"); + return -EINVAL; + break; + } + return 0; +} static int iwl4965_mac_get_tx_stats(struct ieee80211_hw *hw, struct ieee80211_tx_queue_stats *stats) { -- GitLab From 4bf64efd26f5610cde4fb7846e2f37bd1f62d3a9 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 18 Jul 2008 13:53:03 +0800 Subject: [PATCH 0703/1024] iwlwifi: move beacon handling to iwl4965-base.c This patch concentrates becaon handling in iwl4965-base.c. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 32 ----------------- drivers/net/wireless/iwlwifi/iwl-commands.h | 2 +- drivers/net/wireless/iwlwifi/iwl-dev.h | 3 +- drivers/net/wireless/iwlwifi/iwl4965-base.c | 39 ++++++++++++++++++--- 4 files changed, 37 insertions(+), 39 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 3cc6f00d96c..9ae8525b9b6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -1689,38 +1689,6 @@ static int iwl4965_shared_mem_rx_idx(struct iwl_priv *priv) return le32_to_cpu(s->rb_closed) & 0xFFF; } -unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, - struct iwl_frame *frame, u8 rate) -{ - struct iwl4965_tx_beacon_cmd *tx_beacon_cmd; - unsigned int frame_size; - - tx_beacon_cmd = &frame->u.beacon; - memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); - - tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id; - tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - - frame_size = iwl4965_fill_beacon_frame(priv, - tx_beacon_cmd->frame, - iwl_bcast_addr, - sizeof(frame->u) - sizeof(*tx_beacon_cmd)); - - BUG_ON(frame_size > MAX_MPDU_SIZE); - tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); - - if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP)) - tx_beacon_cmd->tx.rate_n_flags = - iwl_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK); - else - tx_beacon_cmd->tx.rate_n_flags = - iwl_hw_set_rate_n_flags(rate, 0); - - tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK | - TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK); - return (sizeof(*tx_beacon_cmd) + frame_size); -} - static int iwl4965_alloc_shared_mem(struct iwl_priv *priv) { priv->shared_virt = pci_alloc_consistent(priv->pci_dev, diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 6f3555ffe52..cd6d668f4e0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -2324,7 +2324,7 @@ struct iwl4965_beacon_notif { /* * REPLY_TX_BEACON = 0x91 (command, has simple generic response) */ -struct iwl4965_tx_beacon_cmd { +struct iwl_tx_beacon_cmd { struct iwl_tx_cmd tx; __le16 tim_idx; u8 tim_size; diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index d2d4beab82a..ff16cca2b8c 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -219,7 +219,7 @@ enum iwl_pwr_src { struct iwl_frame { union { struct ieee80211_hdr frame; - struct iwl4965_tx_beacon_cmd beacon; + struct iwl_tx_beacon_cmd beacon; u8 raw[IEEE80211_FRAME_LEN]; u8 cmd[360]; } u; @@ -286,7 +286,6 @@ struct iwl_cmd { struct iwl_powertable_cmd powertable; struct iwl_qosparam_cmd qosparam; struct iwl_tx_cmd tx; - struct iwl4965_tx_beacon_cmd tx_beacon; struct iwl4965_rxon_assoc_cmd rxon_assoc; struct iwl_rem_sta_cmd rm_sta; u8 *indirect; diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index a34280f65c1..94ce026ba60 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -444,11 +444,10 @@ static void iwl_free_frame(struct iwl_priv *priv, struct iwl_frame *frame) list_add(&frame->list, &priv->free_frames); } -unsigned int iwl4965_fill_beacon_frame(struct iwl_priv *priv, - struct ieee80211_hdr *hdr, - const u8 *dest, int left) +static unsigned int iwl_fill_beacon_frame(struct iwl_priv *priv, + struct ieee80211_hdr *hdr, + const u8 *dest, int left) { - if (!iwl_is_associated(priv) || !priv->ibss_beacon || ((priv->iw_mode != IEEE80211_IF_TYPE_IBSS) && (priv->iw_mode != IEEE80211_IF_TYPE_AP))) @@ -487,6 +486,38 @@ static u8 iwl4965_rate_get_lowest_plcp(struct iwl_priv *priv) return IWL_RATE_6M_PLCP; } +unsigned int iwl4965_hw_get_beacon_cmd(struct iwl_priv *priv, + struct iwl_frame *frame, u8 rate) +{ + struct iwl_tx_beacon_cmd *tx_beacon_cmd; + unsigned int frame_size; + + tx_beacon_cmd = &frame->u.beacon; + memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); + + tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id; + tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; + + frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame, + iwl_bcast_addr, + sizeof(frame->u) - sizeof(*tx_beacon_cmd)); + + BUG_ON(frame_size > MAX_MPDU_SIZE); + tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); + + if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP)) + tx_beacon_cmd->tx.rate_n_flags = + iwl_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK); + else + tx_beacon_cmd->tx.rate_n_flags = + iwl_hw_set_rate_n_flags(rate, 0); + + tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK | + TX_CMD_FLG_TSF_MSK | + TX_CMD_FLG_STA_RATE_MSK; + + return sizeof(*tx_beacon_cmd) + frame_size; +} static int iwl4965_send_beacon_cmd(struct iwl_priv *priv) { struct iwl_frame *frame; -- GitLab From e2e3c57b271d74ed8fd4d378f1517525ef7e5921 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 18 Jul 2008 13:53:04 +0800 Subject: [PATCH 0704/1024] iwlwifi: move iwl4965_set_pwr_src to iwl4965-base.c This patch moves iwl4965_set_pwr_src to iwl4965-base.c. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 33 --------------------- drivers/net/wireless/iwlwifi/iwl4965-base.c | 31 +++++++++++++++++++ 2 files changed, 31 insertions(+), 33 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 9ae8525b9b6..c0ba28fa672 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -341,39 +341,6 @@ err: return -EINVAL; } -int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src) -{ - int ret; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - ret = iwl_grab_nic_access(priv); - if (ret) { - spin_unlock_irqrestore(&priv->lock, flags); - return ret; - } - - if (src == IWL_PWR_SRC_VAUX) { - u32 val; - ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE, - &val); - - if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) { - iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VAUX, - ~APMG_PS_CTRL_MSK_PWR_SRC); - } - } else { - iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, - ~APMG_PS_CTRL_MSK_PWR_SRC); - } - - iwl_release_nic_access(priv); - spin_unlock_irqrestore(&priv->lock, flags); - - return ret; -} /* * Activate/Deactivat Tx DMA/FIFO channels according tx fifos mask diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 94ce026ba60..ac02342d228 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -1262,6 +1262,37 @@ static void iwl4965_rx_card_state_notif(struct iwl_priv *priv, wake_up_interruptible(&priv->wait_command_queue); } +int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + ret = iwl_grab_nic_access(priv); + if (ret) + goto err; + + if (src == IWL_PWR_SRC_VAUX) { + u32 val; + ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE, + &val); + + if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) + iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VAUX, + ~APMG_PS_CTRL_MSK_PWR_SRC); + } else { + iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, + ~APMG_PS_CTRL_MSK_PWR_SRC); + } + + iwl_release_nic_access(priv); +err: + spin_unlock_irqrestore(&priv->lock, flags); + return ret; +} + /** * iwl4965_setup_rx_handlers - Initialize Rx handler callbacks * -- GitLab From e227ceac8429ecd775c213838f0415700727b7b4 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 18 Jul 2008 13:53:05 +0800 Subject: [PATCH 0705/1024] iwlwifi: rename iwl-4695-rs to iwl-agn-rs This patch renames iwl-4965-rs to iwl-agn-rs as it provides rate scale capability for all AGN capable iwlwifi drivers. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/Makefile | 2 +- .../iwlwifi/{iwl-4965-rs.c => iwl-agn-rs.c} | 219 +++++++++--------- .../iwlwifi/{iwl-4965-rs.h => iwl-agn-rs.h} | 14 +- drivers/net/wireless/iwlwifi/iwl-core.c | 2 +- drivers/net/wireless/iwlwifi/iwl-dev.h | 2 +- drivers/net/wireless/iwlwifi/iwl-sta.c | 2 +- drivers/net/wireless/iwlwifi/iwl4965-base.c | 6 +- 7 files changed, 119 insertions(+), 128 deletions(-) rename drivers/net/wireless/iwlwifi/{iwl-4965-rs.c => iwl-agn-rs.c} (93%) rename drivers/net/wireless/iwlwifi/{iwl-4965-rs.h => iwl-agn-rs.h} (96%) diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index 1f52b92f08b..f50d2f8fd5c 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -11,7 +11,7 @@ iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl3945-$(CONFIG_IWL3945_LEDS) += iwl-3945-led.o obj-$(CONFIG_IWL4965) += iwl4965.o -iwl4965-objs := iwl4965-base.o iwl-4965.o iwl-4965-rs.o +iwl4965-objs := iwl4965-base.o iwl-4965.o iwl-agn-rs.o ifeq ($(CONFIG_IWL5000),y) iwl4965-objs += iwl-5000.o diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c similarity index 93% rename from drivers/net/wireless/iwlwifi/iwl-4965-rs.c rename to drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 3ccb84aa5db..eee22c6dec7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -42,7 +42,7 @@ #include "iwl-core.h" #include "iwl-helpers.h" -#define RS_NAME "iwl-4965-rs" +#define RS_NAME "iwl-agn-rs" #define NUM_TRY_BEFORE_ANT_TOGGLE 1 #define IWL_NUMBER_TRY 1 @@ -77,9 +77,9 @@ static const u8 ant_toggle_lookup[] = { }; /** - * struct iwl4965_rate_scale_data -- tx success history for one rate + * struct iwl_rate_scale_data -- tx success history for one rate */ -struct iwl4965_rate_scale_data { +struct iwl_rate_scale_data { u64 data; /* bitmap of successful frames */ s32 success_counter; /* number of frames successful */ s32 success_ratio; /* per-cent * 128 */ @@ -89,12 +89,12 @@ struct iwl4965_rate_scale_data { }; /** - * struct iwl4965_scale_tbl_info -- tx params and success history for all rates + * struct iwl_scale_tbl_info -- tx params and success history for all rates * - * There are two of these in struct iwl4965_lq_sta, + * There are two of these in struct iwl_lq_sta, * one for "active", and one for "search". */ -struct iwl4965_scale_tbl_info { +struct iwl_scale_tbl_info { enum iwl_table_type lq_type; u8 ant_type; u8 is_SGI; /* 1 = short guard interval */ @@ -103,10 +103,10 @@ struct iwl4965_scale_tbl_info { u8 action; /* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */ s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */ u32 current_rate; /* rate_n_flags, uCode API format */ - struct iwl4965_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */ + struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */ }; -struct iwl4965_traffic_load { +struct iwl_traffic_load { unsigned long time_stamp; /* age of the oldest statistics */ u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time * slice */ @@ -118,11 +118,11 @@ struct iwl4965_traffic_load { }; /** - * struct iwl4965_lq_sta -- driver's rate scaling private structure + * struct iwl_lq_sta -- driver's rate scaling private structure * * Pointer to this gets passed back and forth between driver and mac80211. */ -struct iwl4965_lq_sta { +struct iwl_lq_sta { u8 active_tbl; /* index of active table, range 0-1 */ u8 enable_counter; /* indicates HT mode */ u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */ @@ -153,8 +153,8 @@ struct iwl4965_lq_sta { u16 active_rate_basic; struct iwl_link_quality_cmd lq; - struct iwl4965_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ - struct iwl4965_traffic_load load[TID_MAX_LOAD_COUNT]; + struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */ + struct iwl_traffic_load load[TID_MAX_LOAD_COUNT]; u8 tx_agg_tid_en; #ifdef CONFIG_MAC80211_DEBUGFS struct dentry *rs_sta_dbgfs_scale_table_file; @@ -170,16 +170,15 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, struct ieee80211_hdr *hdr, struct sta_info *sta); static void rs_fill_link_cmd(const struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - u32 rate_n_flags); + struct iwl_lq_sta *lq_sta, u32 rate_n_flags); #ifdef CONFIG_MAC80211_DEBUGFS -static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - u32 *rate_n_flags, int index); +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index); #else -static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - u32 *rate_n_flags, int index) +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index) {} #endif @@ -234,7 +233,7 @@ static inline u8 rs_extract_rate(u32 rate_n_flags) return (u8)(rate_n_flags & 0xFF); } -static void rs_rate_scale_clear_window(struct iwl4965_rate_scale_data *window) +static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window) { window->data = 0; window->success_counter = 0; @@ -253,7 +252,7 @@ static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) * removes the old data from the statistics. All data that is older than * TID_MAX_TIME_DIFF, will be deleted. */ -static void rs_tl_rm_old_stats(struct iwl4965_traffic_load *tl, u32 curr_time) +static void rs_tl_rm_old_stats(struct iwl_traffic_load *tl, u32 curr_time) { /* The oldest age we want to keep */ u32 oldest_time = curr_time - TID_MAX_TIME_DIFF; @@ -274,13 +273,13 @@ static void rs_tl_rm_old_stats(struct iwl4965_traffic_load *tl, u32 curr_time) * increment traffic load value for tid and also remove * any old values if passed the certain time period */ -static u8 rs_tl_add_packet(struct iwl4965_lq_sta *lq_data, +static u8 rs_tl_add_packet(struct iwl_lq_sta *lq_data, struct ieee80211_hdr *hdr) { u32 curr_time = jiffies_to_msecs(jiffies); u32 time_diff; s32 index; - struct iwl4965_traffic_load *tl = NULL; + struct iwl_traffic_load *tl = NULL; __le16 fc = hdr->frame_control; u8 tid; @@ -325,12 +324,12 @@ static u8 rs_tl_add_packet(struct iwl4965_lq_sta *lq_data, /* get the traffic load value for tid */ -static u32 rs_tl_get_load(struct iwl4965_lq_sta *lq_data, u8 tid) +static u32 rs_tl_get_load(struct iwl_lq_sta *lq_data, u8 tid) { u32 curr_time = jiffies_to_msecs(jiffies); u32 time_diff; s32 index; - struct iwl4965_traffic_load *tl = NULL; + struct iwl_traffic_load *tl = NULL; if (tid >= TID_MAX_LOAD_COUNT) return 0; @@ -354,8 +353,8 @@ static u32 rs_tl_get_load(struct iwl4965_lq_sta *lq_data, u8 tid) } static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_data, u8 tid, - struct sta_info *sta) + struct iwl_lq_sta *lq_data, u8 tid, + struct sta_info *sta) { unsigned long state; DECLARE_MAC_BUF(mac); @@ -373,8 +372,8 @@ static void rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv, } static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, - struct iwl4965_lq_sta *lq_data, - struct sta_info *sta) + struct iwl_lq_sta *lq_data, + struct sta_info *sta) { if ((tid < TID_MAX_LOAD_COUNT)) rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); @@ -397,11 +396,11 @@ static inline int get_num_of_ant_from_rate(u32 rate_n_flags) * at this rate. window->data contains the bitmask of successful * packets. */ -static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows, +static int rs_collect_tx_data(struct iwl_rate_scale_data *windows, int scale_index, s32 tpt, int retries, int successes) { - struct iwl4965_rate_scale_data *window = NULL; + struct iwl_rate_scale_data *window = NULL; static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1)); s32 fail_count; @@ -473,7 +472,7 @@ static int rs_collect_tx_data(struct iwl4965_rate_scale_data *windows, * Fill uCode API rate_n_flags field, based on "search" or "active" table. */ /* FIXME:RS:remove this function and put the flags statically in the table */ -static u32 rate_n_flags_from_tbl(struct iwl4965_scale_tbl_info *tbl, +static u32 rate_n_flags_from_tbl(struct iwl_scale_tbl_info *tbl, int index, u8 use_green) { u32 rate_n_flags = 0; @@ -530,7 +529,7 @@ static u32 rate_n_flags_from_tbl(struct iwl4965_scale_tbl_info *tbl, */ static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, enum ieee80211_band band, - struct iwl4965_scale_tbl_info *tbl, + struct iwl_scale_tbl_info *tbl, int *rate_idx) { u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK); @@ -591,7 +590,7 @@ static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, /* switch to another antenna/antennas and return 1 */ /* if no other valid antenna found, return 0 */ static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, - struct iwl4965_scale_tbl_info *tbl) + struct iwl_scale_tbl_info *tbl) { u8 new_ant_type; @@ -638,9 +637,9 @@ static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf * basic available rates. * */ -static u16 rs_get_supported_rates(struct iwl4965_lq_sta *lq_sta, - struct ieee80211_hdr *hdr, - enum iwl_table_type rate_type) +static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta, + struct ieee80211_hdr *hdr, + enum iwl_table_type rate_type) { if (hdr && is_multicast_ether_addr(hdr->addr1) && lq_sta->active_rate_basic) @@ -714,9 +713,9 @@ static u16 rs_get_adjacent_rate(struct iwl_priv *priv, u8 index, u16 rate_mask, return (high << 8) | low; } -static u32 rs_get_lower_rate(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_scale_tbl_info *tbl, u8 scale_index, - u8 ht_possible) +static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl, + u8 scale_index, u8 ht_possible) { s32 low; u16 rate_mask; @@ -780,7 +779,7 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, int status; u8 retries; int rs_index, index = 0; - struct iwl4965_lq_sta *lq_sta; + struct iwl_lq_sta *lq_sta; struct iwl_link_quality_cmd *table; struct sta_info *sta; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; @@ -788,11 +787,11 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct ieee80211_hw *hw = local_to_hw(local); struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct iwl4965_rate_scale_data *window = NULL; - struct iwl4965_rate_scale_data *search_win = NULL; + struct iwl_rate_scale_data *window = NULL; + struct iwl_rate_scale_data *search_win = NULL; u32 tx_rate; - struct iwl4965_scale_tbl_info tbl_type; - struct iwl4965_scale_tbl_info *curr_tbl, *search_tbl; + struct iwl_scale_tbl_info tbl_type; + struct iwl_scale_tbl_info *curr_tbl, *search_tbl; u8 active_index = 0; __le16 fc = hdr->frame_control; s32 tpt = 0; @@ -820,7 +819,7 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, goto out; - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; + lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && !lq_sta->ibss_sta_added) @@ -831,10 +830,8 @@ static void rs_tx_status(void *priv_rate, struct net_device *dev, curr_tbl = &(lq_sta->lq_info[active_index]); search_tbl = &(lq_sta->lq_info[(1 - active_index)]); - window = (struct iwl4965_rate_scale_data *) - &(curr_tbl->win[0]); - search_win = (struct iwl4965_rate_scale_data *) - &(search_tbl->win[0]); + window = (struct iwl_rate_scale_data *)&(curr_tbl->win[0]); + search_win = (struct iwl_rate_scale_data *)&(search_tbl->win[0]); /* * Ignore this Tx frame response if its initial rate doesn't match @@ -983,7 +980,7 @@ out: * searching for a new mode. */ static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy, - struct iwl4965_lq_sta *lq_sta) + struct iwl_lq_sta *lq_sta) { IWL_DEBUG_RATE("we are staying in the same table\n"); lq_sta->stay_in_tbl = 1; /* only place this gets set */ @@ -1004,8 +1001,8 @@ static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy, /* * Find correct throughput table for given mode of modulation */ -static void rs_set_expected_tpt_table(struct iwl4965_lq_sta *lq_sta, - struct iwl4965_scale_tbl_info *tbl) +static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl) { if (is_legacy(tbl->lq_type)) { if (!is_a_band(tbl->lq_type)) @@ -1050,12 +1047,12 @@ static void rs_set_expected_tpt_table(struct iwl4965_lq_sta *lq_sta, * bit rate will typically need to increase, but not if performance was bad. */ static s32 rs_get_best_rate(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - struct iwl4965_scale_tbl_info *tbl, /* "search" */ + struct iwl_lq_sta *lq_sta, + struct iwl_scale_tbl_info *tbl, /* "search" */ u16 rate_mask, s8 index) { /* "active" values */ - struct iwl4965_scale_tbl_info *active_tbl = + struct iwl_scale_tbl_info *active_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); s32 active_sr = active_tbl->win[index].success_ratio; s32 active_tpt = active_tbl->expected_tpt[index]; @@ -1143,10 +1140,10 @@ static s32 rs_get_best_rate(struct iwl_priv *priv, * Set up search table for MIMO */ static int rs_switch_to_mimo2(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, + struct iwl_lq_sta *lq_sta, struct ieee80211_conf *conf, struct sta_info *sta, - struct iwl4965_scale_tbl_info *tbl, int index) + struct iwl_scale_tbl_info *tbl, int index) { u16 rate_mask; s32 rate; @@ -1210,10 +1207,10 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, * Set up search table for SISO */ static int rs_switch_to_siso(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, + struct iwl_lq_sta *lq_sta, struct ieee80211_conf *conf, struct sta_info *sta, - struct iwl4965_scale_tbl_info *tbl, int index) + struct iwl_scale_tbl_info *tbl, int index) { u16 rate_mask; u8 is_green = lq_sta->is_green; @@ -1270,18 +1267,17 @@ static int rs_switch_to_siso(struct iwl_priv *priv, * Try to switch to new modulation mode from legacy */ static int rs_move_legacy_other(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, + struct iwl_lq_sta *lq_sta, struct ieee80211_conf *conf, struct sta_info *sta, int index) { - struct iwl4965_scale_tbl_info *tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl4965_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl4965_rate_scale_data *window = &(tbl->win[index]); - u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); u8 start_action = tbl->action; u8 valid_tx_ant = priv->hw_params.valid_tx_ant; int ret = 0; @@ -1360,19 +1356,17 @@ static int rs_move_legacy_other(struct iwl_priv *priv, * Try to switch to new modulation mode from SISO */ static int rs_move_siso_to_other(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, + struct iwl_lq_sta *lq_sta, struct ieee80211_conf *conf, - struct sta_info *sta, - int index) + struct sta_info *sta, int index) { u8 is_green = lq_sta->is_green; - struct iwl4965_scale_tbl_info *tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl4965_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - struct iwl4965_rate_scale_data *window = &(tbl->win[index]); - u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + struct iwl_rate_scale_data *window = &(tbl->win[index]); + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); u8 start_action = tbl->action; u8 valid_tx_ant = priv->hw_params.valid_tx_ant; int ret; @@ -1455,18 +1449,16 @@ static int rs_move_siso_to_other(struct iwl_priv *priv, * Try to switch to new modulation mode from MIMO */ static int rs_move_mimo_to_other(struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, + struct iwl_lq_sta *lq_sta, struct ieee80211_conf *conf, - struct sta_info *sta, - int index) + struct sta_info *sta, int index) { s8 is_green = lq_sta->is_green; - struct iwl4965_scale_tbl_info *tbl = - &(lq_sta->lq_info[lq_sta->active_tbl]); - struct iwl4965_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); - u32 sz = (sizeof(struct iwl4965_scale_tbl_info) - - (sizeof(struct iwl4965_rate_scale_data) * IWL_RATE_COUNT)); + struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *search_tbl = + &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + u32 sz = (sizeof(struct iwl_scale_tbl_info) - + (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); u8 start_action = tbl->action; /*u8 valid_tx_ant = priv->hw_params.valid_tx_ant;*/ int ret; @@ -1552,9 +1544,9 @@ static int rs_move_mimo_to_other(struct iwl_priv *priv, * 2) # times calling this function * 3) elapsed time in this mode (not used, for now) */ -static void rs_stay_in_table(struct iwl4965_lq_sta *lq_sta) +static void rs_stay_in_table(struct iwl_lq_sta *lq_sta) { - struct iwl4965_scale_tbl_info *tbl; + struct iwl_scale_tbl_info *tbl; int i; int active_tbl; int flush_interval_passed = 0; @@ -1642,7 +1634,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, int high = IWL_RATE_INVALID; int index; int i; - struct iwl4965_rate_scale_data *window = NULL; + struct iwl_rate_scale_data *window = NULL; int current_tpt = IWL_INVALID_VALUE; int low_tpt = IWL_INVALID_VALUE; int high_tpt = IWL_INVALID_VALUE; @@ -1651,8 +1643,8 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, __le16 fc; u16 rate_mask; u8 update_lq = 0; - struct iwl4965_lq_sta *lq_sta; - struct iwl4965_scale_tbl_info *tbl, *tbl1; + struct iwl_lq_sta *lq_sta; + struct iwl_scale_tbl_info *tbl, *tbl1; u16 rate_scale_index_msk = 0; u32 rate; u8 is_green = 0; @@ -1675,7 +1667,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, if (!sta || !sta->rate_ctrl_priv) return; - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; + lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; tid = rs_tl_add_packet(lq_sta, hdr); @@ -2030,8 +2022,8 @@ static void rs_initialize_lq(struct iwl_priv *priv, struct ieee80211_conf *conf, struct sta_info *sta) { - struct iwl4965_lq_sta *lq_sta; - struct iwl4965_scale_tbl_info *tbl; + struct iwl_lq_sta *lq_sta; + struct iwl_scale_tbl_info *tbl; int rate_idx; int i; u32 rate; @@ -2042,7 +2034,7 @@ static void rs_initialize_lq(struct iwl_priv *priv, if (!sta || !sta->rate_ctrl_priv) goto out; - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; + lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; i = sta->last_txrate_idx; if ((lq_sta->lq.sta_id == 0xff) && @@ -2096,7 +2088,7 @@ static void rs_get_rate(void *priv_rate, struct net_device *dev, struct sta_info *sta; __le16 fc; struct iwl_priv *priv = (struct iwl_priv *)priv_rate; - struct iwl4965_lq_sta *lq_sta; + struct iwl_lq_sta *lq_sta; IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n"); @@ -2113,7 +2105,7 @@ static void rs_get_rate(void *priv_rate, struct net_device *dev, goto out; } - lq_sta = (struct iwl4965_lq_sta *)sta->rate_ctrl_priv; + lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv; i = sta->last_txrate_idx; if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && @@ -2149,14 +2141,14 @@ out: static void *rs_alloc_sta(void *priv_rate, gfp_t gfp) { - struct iwl4965_lq_sta *lq_sta; + struct iwl_lq_sta *lq_sta; struct iwl_priv *priv; int i, j; priv = (struct iwl_priv *)priv_rate; IWL_DEBUG_RATE("create station rate scale window\n"); - lq_sta = kzalloc(sizeof(struct iwl4965_lq_sta), gfp); + lq_sta = kzalloc(sizeof(struct iwl_lq_sta), gfp); if (lq_sta == NULL) return NULL; @@ -2178,7 +2170,7 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, struct ieee80211_conf *conf = &local->hw.conf; struct ieee80211_supported_band *sband; struct iwl_priv *priv = (struct iwl_priv *)priv_rate; - struct iwl4965_lq_sta *lq_sta = priv_sta; + struct iwl_lq_sta *lq_sta = priv_sta; sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; @@ -2271,10 +2263,9 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, } static void rs_fill_link_cmd(const struct iwl_priv *priv, - struct iwl4965_lq_sta *lq_sta, - u32 new_rate) + struct iwl_lq_sta *lq_sta, u32 new_rate) { - struct iwl4965_scale_tbl_info tbl_type; + struct iwl_scale_tbl_info tbl_type; int index = 0; int rate_idx; int repeat_rate = 0; @@ -2413,7 +2404,7 @@ static void rs_clear(void *priv_rate) static void rs_free_sta(void *priv_rate, void *priv_sta) { - struct iwl4965_lq_sta *lq_sta = priv_sta; + struct iwl_lq_sta *lq_sta = priv_sta; struct iwl_priv *priv; priv = (struct iwl_priv *)priv_rate; @@ -2429,8 +2420,8 @@ static int open_file_generic(struct inode *inode, struct file *file) file->private_data = inode->i_private; return 0; } -static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, - u32 *rate_n_flags, int index) +static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, + u32 *rate_n_flags, int index) { struct iwl_priv *priv; @@ -2453,7 +2444,7 @@ static void rs_dbgfs_set_mcs(struct iwl4965_lq_sta *lq_sta, static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, const char __user *user_buf, size_t count, loff_t *ppos) { - struct iwl4965_lq_sta *lq_sta = file->private_data; + struct iwl_lq_sta *lq_sta = file->private_data; struct iwl_priv *priv; char buf[64]; int buf_size; @@ -2493,7 +2484,7 @@ static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, int desc = 0; int i = 0; - struct iwl4965_lq_sta *lq_sta = file->private_data; + struct iwl_lq_sta *lq_sta = file->private_data; desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n", @@ -2541,7 +2532,7 @@ static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, int desc = 0; int i, j; - struct iwl4965_lq_sta *lq_sta = file->private_data; + struct iwl_lq_sta *lq_sta = file->private_data; for (i = 0; i < LQ_SIZE; i++) { desc += sprintf(buff+desc, "%s type=%d SGI=%d FAT=%d DUP=%d\n" "rate=0x%X\n", @@ -2570,7 +2561,7 @@ static const struct file_operations rs_sta_dbgfs_stats_table_ops = { static void rs_add_debugfs(void *priv, void *priv_sta, struct dentry *dir) { - struct iwl4965_lq_sta *lq_sta = priv_sta; + struct iwl_lq_sta *lq_sta = priv_sta; lq_sta->rs_sta_dbgfs_scale_table_file = debugfs_create_file("rate_scale_table", 0600, dir, lq_sta, &rs_sta_dbgfs_scale_table_ops); @@ -2585,7 +2576,7 @@ static void rs_add_debugfs(void *priv, void *priv_sta, static void rs_remove_debugfs(void *priv, void *priv_sta) { - struct iwl4965_lq_sta *lq_sta = priv_sta; + struct iwl_lq_sta *lq_sta = priv_sta; debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file); debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file); @@ -2613,7 +2604,7 @@ int iwl4965_fill_rs_info(struct ieee80211_hw *hw, char *buf, u8 sta_id) { struct ieee80211_local *local = hw_to_local(hw); struct iwl_priv *priv = hw->priv; - struct iwl4965_lq_sta *lq_sta; + struct iwl_lq_sta *lq_sta; struct sta_info *sta; int cnt = 0, i; u32 samples = 0, success = 0, good = 0; @@ -2701,12 +2692,12 @@ int iwl4965_fill_rs_info(struct ieee80211_hw *hw, char *buf, u8 sta_id) return cnt; } -int iwl4965_rate_control_register(void) +int iwlagn_rate_control_register(void) { return ieee80211_rate_control_register(&rs_ops); } -void iwl4965_rate_control_unregister(void) +void iwlagn_rate_control_unregister(void) { ieee80211_rate_control_unregister(&rs_ops); } diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h similarity index 96% rename from drivers/net/wireless/iwlwifi/iwl-4965-rs.h rename to drivers/net/wireless/iwlwifi/iwl-agn-rs.h index 9b9972885aa..3b06c9da77e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.h +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h @@ -24,8 +24,8 @@ * *****************************************************************************/ -#ifndef __iwl_4965_rs_h__ -#define __iwl_4965_rs_h__ +#ifndef __iwl_agn_rs_h__ +#define __iwl_agn_rs_h__ #include "iwl-dev.h" @@ -88,7 +88,7 @@ enum { #define IWL_RATE_5M_MASK (1 << IWL_RATE_5M_INDEX) #define IWL_RATE_11M_MASK (1 << IWL_RATE_11M_INDEX) -/* 4965 uCode API values for legacy bit rates, both OFDM and CCK */ +/* uCode API values for legacy bit rates, both OFDM and CCK */ enum { IWL_RATE_6M_PLCP = 13, IWL_RATE_9M_PLCP = 15, @@ -107,7 +107,7 @@ enum { /*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/ }; -/* 4965 uCode API values for OFDM high-throughput (HT) bit rates */ +/* uCode API values for OFDM high-throughput (HT) bit rates */ enum { IWL_RATE_SISO_6M_PLCP = 0, IWL_RATE_SISO_12M_PLCP = 1, @@ -305,7 +305,7 @@ extern int iwl4965_fill_rs_info(struct ieee80211_hw *, char *buf, u8 sta_id); * ieee80211_register_hw * */ -extern int iwl4965_rate_control_register(void); +extern int iwlagn_rate_control_register(void); /** * iwl4965_rate_control_unregister - Unregister the rate control callbacks @@ -313,6 +313,6 @@ extern int iwl4965_rate_control_register(void); * This should be called after calling ieee80211_unregister_hw, but before * the driver is unloaded. */ -extern void iwl4965_rate_control_unregister(void); +extern void iwlagn_rate_control_unregister(void); -#endif +#endif /* __iwl_agn__rs__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index e3427c205cc..60d443e77c3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -815,7 +815,7 @@ int iwl_setup_mac(struct iwl_priv *priv) { int ret; struct ieee80211_hw *hw = priv->hw; - hw->rate_control_algorithm = "iwl-4965-rs"; + hw->rate_control_algorithm = "iwl-agn-rs"; /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index ff16cca2b8c..7ac56b1350b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -45,6 +45,7 @@ #include "iwl-debug.h" #include "iwl-led.h" #include "iwl-power.h" +#include "iwl-agn-rs.h" /* configuration for the iwl4965 */ extern struct iwl_cfg iwl4965_agn_cfg; @@ -191,7 +192,6 @@ struct iwl4965_clip_group { const s8 clip_powers[IWL_MAX_RATES]; }; -#include "iwl-4965-rs.h" #define IWL_TX_FIFO_AC0 0 #define IWL_TX_FIFO_AC1 1 diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 6d1467d0bd9..10af82170f6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -839,7 +839,7 @@ EXPORT_SYMBOL(iwl_send_lq_cmd); * for automatic fallback during transmission. * * NOTE: This sets up a default set of values. These will be replaced later - * if the driver's iwl-4965-rs rate scaling algorithm is used, instead of + * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of * rc80211_simple. * * NOTE: Run REPLY_ADD_STA command to set up station table entry, before diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index ac02342d228..dcd11e9bd86 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -4503,7 +4503,7 @@ static int __init iwl4965_init(void) printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n"); printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n"); - ret = iwl4965_rate_control_register(); + ret = iwlagn_rate_control_register(); if (ret) { IWL_ERROR("Unable to register rate control algorithm: %d\n", ret); return ret; @@ -4518,14 +4518,14 @@ static int __init iwl4965_init(void) return ret; error_register: - iwl4965_rate_control_unregister(); + iwlagn_rate_control_unregister(); return ret; } static void __exit iwl4965_exit(void) { pci_unregister_driver(&iwl_driver); - iwl4965_rate_control_unregister(); + iwlagn_rate_control_unregister(); } module_exit(iwl4965_exit); -- GitLab From 3ce84b9f2f495f59c4a4e68d814c348eaa497f65 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 18 Jul 2008 13:53:06 +0800 Subject: [PATCH 0706/1024] iwlwifi: kill iwl4965_fill_rs_info iwl4965_fill_rs_info was used in sysfs. This info is already present in iwl-agn-rs debugfs. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 92 --------------------- drivers/net/wireless/iwlwifi/iwl-agn-rs.h | 9 -- drivers/net/wireless/iwlwifi/iwl4965-base.c | 10 --- 3 files changed, 111 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index eee22c6dec7..0e8100e7062 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -2600,98 +2600,6 @@ static struct rate_control_ops rs_ops = { #endif }; -int iwl4965_fill_rs_info(struct ieee80211_hw *hw, char *buf, u8 sta_id) -{ - struct ieee80211_local *local = hw_to_local(hw); - struct iwl_priv *priv = hw->priv; - struct iwl_lq_sta *lq_sta; - struct sta_info *sta; - int cnt = 0, i; - u32 samples = 0, success = 0, good = 0; - unsigned long now = jiffies; - u32 max_time = 0; - u8 lq_type, antenna; - - rcu_read_lock(); - - sta = sta_info_get(local, priv->stations[sta_id].sta.sta.addr); - if (!sta || !sta->rate_ctrl_priv) { - if (sta) - IWL_DEBUG_RATE("leave - no private rate data!\n"); - else - IWL_DEBUG_RATE("leave - no station!\n"); - rcu_read_unlock(); - return sprintf(buf, "station %d not found\n", sta_id); - } - - lq_sta = (void *)sta->rate_ctrl_priv; - - lq_type = lq_sta->lq_info[lq_sta->active_tbl].lq_type; - antenna = lq_sta->lq_info[lq_sta->active_tbl].ant_type; - - if (is_legacy(lq_type)) - i = IWL_RATE_54M_INDEX; - else - i = IWL_RATE_60M_INDEX; - while (1) { - u64 mask; - int j; - int active = lq_sta->active_tbl; - - cnt += - sprintf(&buf[cnt], " %2dMbs: ", iwl_rates[i].ieee / 2); - - mask = (1ULL << (IWL_RATE_MAX_WINDOW - 1)); - for (j = 0; j < IWL_RATE_MAX_WINDOW; j++, mask >>= 1) - buf[cnt++] = - (lq_sta->lq_info[active].win[i].data & mask) - ? '1' : '0'; - - samples += lq_sta->lq_info[active].win[i].counter; - good += lq_sta->lq_info[active].win[i].success_counter; - success += lq_sta->lq_info[active].win[i].success_counter * - iwl_rates[i].ieee; - - if (lq_sta->lq_info[active].win[i].stamp) { - int delta = - jiffies_to_msecs(now - - lq_sta->lq_info[active].win[i].stamp); - - if (delta > max_time) - max_time = delta; - - cnt += sprintf(&buf[cnt], "%5dms\n", delta); - } else - buf[cnt++] = '\n'; - - j = iwl4965_get_prev_ieee_rate(i); - if (j == i) - break; - i = j; - } - - /* - * Display the average rate of all samples taken. - * NOTE: We multiply # of samples by 2 since the IEEE measurement - * added from iwl_rates is actually 2X the rate. - */ - if (samples) - cnt += sprintf(&buf[cnt], - "\nAverage rate is %3d.%02dMbs over last %4dms\n" - "%3d%% success (%d good packets over %d tries)\n", - success / (2 * samples), (success * 5 / samples) % 10, - max_time, good * 100 / samples, good, samples); - else - cnt += sprintf(&buf[cnt], "\nAverage rate: 0Mbs\n"); - - cnt += sprintf(&buf[cnt], "\nrate scale type %d antenna %d " - "active_search %d rate index %d\n", lq_type, antenna, - lq_sta->search_better_tbl, sta->last_txrate_idx); - - rcu_read_unlock(); - return cnt; -} - int iwlagn_rate_control_register(void) { return ieee80211_rate_control_register(&rs_ops); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h index 3b06c9da77e..84d4d1e3375 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h @@ -286,15 +286,6 @@ static inline u8 iwl4965_get_prev_ieee_rate(u8 rate_index) return rate; } -/** - * iwl4965_fill_rs_info - Fill an output text buffer with the rate representation - * - * NOTE: This is provided as a quick mechanism for a user to visualize - * the performance of the rate control algorithm and is not meant to be - * parsed software. - */ -extern int iwl4965_fill_rs_info(struct ieee80211_hw *, char *buf, u8 sta_id); - /** * iwl4965_rate_control_register - Register the rate control algorithm callbacks * diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index dcd11e9bd86..9db6aac0218 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -3687,15 +3687,6 @@ static ssize_t show_temperature(struct device *d, static DEVICE_ATTR(temperature, S_IRUGO, show_temperature, NULL); -static ssize_t show_rs_window(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct iwl_priv *priv = d->driver_data; - return iwl4965_fill_rs_info(priv->hw, buf, IWL_AP_ID); -} -static DEVICE_ATTR(rs_window, S_IRUGO, show_rs_window, NULL); - static ssize_t show_tx_power(struct device *d, struct device_attribute *attr, char *buf) { @@ -4118,7 +4109,6 @@ static struct attribute *iwl4965_sysfs_entries[] = { #endif &dev_attr_power_level.attr, &dev_attr_retry_rate.attr, - &dev_attr_rs_window.attr, &dev_attr_statistics.attr, &dev_attr_status.attr, &dev_attr_temperature.attr, -- GitLab From c785d1d5018b93878a9280b0c04df96682cc6eff Mon Sep 17 00:00:00 2001 From: Esti Kummer Date: Fri, 18 Jul 2008 13:53:07 +0800 Subject: [PATCH 0707/1024] iwlwifi: set led register in disassociation This patch sets the led register in disassociation flow according to rf-kill state : off - in case of rf_kill, on - otherwise. Signed-off-by: Esti Kummer Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-led.c | 40 +++++++++++++++----------- 1 file changed, 24 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c index 61250e6a7d1..0a01f091c51 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-led.c @@ -161,11 +161,31 @@ int iwl4965_led_off(struct iwl_priv *priv, int led_id) /* Set led register off */ static int iwl4965_led_off_reg(struct iwl_priv *priv, int led_id) { - IWL_DEBUG_LED("radio off\n"); + IWL_DEBUG_LED("LED Reg off\n"); iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_OFF); return 0; } +/* + * Set led register in case of disassociation according to rfkill state + */ +static int iwl_led_associate(struct iwl_priv *priv, int led_id) +{ + IWL_DEBUG_LED("Associated\n"); + priv->allow_blinking = 1; + return iwl4965_led_on_reg(priv, led_id); +} +static int iwl_led_disassociate(struct iwl_priv *priv, int led_id) +{ + priv->allow_blinking = 0; + if (iwl_is_rfkill(priv)) + iwl4965_led_off_reg(priv, led_id); + else + iwl4965_led_on_reg(priv, led_id); + + return 0; +} + /* * brightness call back function for Tx/Rx LED */ @@ -199,16 +219,10 @@ static void iwl_led_brightness_set(struct led_classdev *led_cdev, led_type_str[led->type], brightness); switch (brightness) { case LED_FULL: - if (led->type == IWL_LED_TRG_ASSOC) - priv->allow_blinking = 1; - if (led->led_on) led->led_on(priv, IWL_LED_LINK); break; case LED_OFF: - if (led->type == IWL_LED_TRG_ASSOC) - priv->allow_blinking = 0; - if (led->led_off) led->led_off(priv, IWL_LED_LINK); break; @@ -284,12 +298,6 @@ static int iwl_get_blink_rate(struct iwl_priv *priv) return i; } -static inline int is_rf_kill(struct iwl_priv *priv) -{ - return test_bit(STATUS_RF_KILL_HW, &priv->status) || - test_bit(STATUS_RF_KILL_SW, &priv->status); -} - /* * this function called from handler. Since setting Led command can * happen very frequent we postpone led command to be called from @@ -303,7 +311,7 @@ void iwl_leds_background(struct iwl_priv *priv) priv->last_blink_time = 0; return; } - if (is_rf_kill(priv)) { + if (iwl_is_rfkill(priv)) { priv->last_blink_time = 0; return; } @@ -366,8 +374,8 @@ int iwl_leds_register(struct iwl_priv *priv) IWL_LED_TRG_ASSOC, 0, name, trigger); /* for assoc always turn led on */ - priv->led[IWL_LED_TRG_ASSOC].led_on = iwl4965_led_on_reg; - priv->led[IWL_LED_TRG_ASSOC].led_off = iwl4965_led_on_reg; + priv->led[IWL_LED_TRG_ASSOC].led_on = iwl_led_associate; + priv->led[IWL_LED_TRG_ASSOC].led_off = iwl_led_disassociate; priv->led[IWL_LED_TRG_ASSOC].led_pattern = NULL; if (ret) -- GitLab From 4aa41f12aa4f08a10b0b07ed334faa3638ba8e9c Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Fri, 18 Jul 2008 13:53:09 +0800 Subject: [PATCH 0708/1024] iwlwifi: bug fix in AGG flow - cast const to ULL This patch fixes a bug in AGG flow: u64 bitmap = 0; bitmap |= 1 << 32 results to be 0xffffffff80000000. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 6 +++--- drivers/net/wireless/iwlwifi/iwl-5000.c | 6 +++--- drivers/net/wireless/iwlwifi/iwl-tx.c | 2 +- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index c0ba28fa672..f356f4f0944 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2130,9 +2130,9 @@ static int iwl4965_tx_status_reply_tx(struct iwl_priv *priv, bitmap = bitmap << sh; sh = 0; } - bitmap |= (1 << sh); - IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%x\n", - start, (u32)(bitmap & 0xFFFFFFFF)); + bitmap |= 1ULL << sh; + IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n", + start, (unsigned long long)bitmap); } agg->bitmap = bitmap; diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index f91c54b5ff5..076d3560302 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1228,9 +1228,9 @@ static int iwl5000_tx_status_reply_tx(struct iwl_priv *priv, bitmap = bitmap << sh; sh = 0; } - bitmap |= (1 << sh); - IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%x\n", - start, (u32)(bitmap & 0xFFFFFFFF)); + bitmap |= 1ULL << sh; + IWL_DEBUG_TX_REPLY("start=%d bitmap=0x%llx\n", + start, (unsigned long long)bitmap); } agg->bitmap = bitmap; diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 0182e4da8e3..39f19ebee97 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -1391,7 +1391,7 @@ static int iwl_tx_status_reply_compressed_ba(struct iwl_priv *priv, /* For each frame attempted in aggregation, * update driver's record of tx frame's status. */ for (i = 0; i < agg->frame_count ; i++) { - ack = bitmap & (1 << i); + ack = bitmap & (1ULL << i); successes += !!ack; IWL_DEBUG_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", ack? "ACK":"NACK", i, (agg->start_idx + i) & 0xff, -- GitLab From e170402e5459c12ed8f5bfaa11e6550eba09e57a Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Sat, 19 Jul 2008 04:04:18 +0300 Subject: [PATCH 0709/1024] iwlwifi: RS small compile warnings without CONFIG_IWLWIFI_DEBUG iwl-agn-rs.c: In function 'rs_clear': iwl-agn-rs.c:2405: warning: unused variable 'priv Signed-off-by: Denis V. Lunev Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 0e8100e7062..b498b58d81f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -2393,6 +2393,7 @@ static void rs_free(void *priv_rate) static void rs_clear(void *priv_rate) { +#ifdef CONFIG_IWLWIFI_DEBUG struct iwl_priv *priv = (struct iwl_priv *) priv_rate; IWL_DEBUG_RATE("enter\n"); @@ -2400,6 +2401,7 @@ static void rs_clear(void *priv_rate) /* TODO - add rate scale state reset */ IWL_DEBUG_RATE("leave\n"); +#endif /* CONFIG_IWLWIFI_DEBUG */ } static void rs_free_sta(void *priv_rate, void *priv_sta) -- GitLab From b5d7be5e665f29274cfe6645b661acb38cb1d19b Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sat, 19 Jul 2008 04:41:24 +0300 Subject: [PATCH 0710/1024] iwlwifi: use dtim_period from association, and set listen_interval This patch uses dtim_period from association, and sets the listen_interval. Signed-off-by: Tomas Winkler Signed-off-by: Emmanuel Grumbach Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-commands.h | 3 +-- drivers/net/wireless/iwlwifi/iwl-core.c | 1 + drivers/net/wireless/iwlwifi/iwl4965-base.c | 5 +++-- 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index cd6d668f4e0..5e57f3ae2ea 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -666,8 +666,7 @@ struct iwl4965_rxon_assoc_cmd { __le16 reserved; } __attribute__ ((packed)); - - +#define IWL_CONN_MAX_LISTEN_INTERVAL 10 /* * REPLY_RXON_TIMING = 0x14 (command, has simple generic response) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 60d443e77c3..96beacf703a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -827,6 +827,7 @@ int iwl_setup_mac(struct iwl_priv *priv) hw->ampdu_queues = priv->cfg->mod_params->num_of_ampdu_queues; hw->conf.beacon_int = 100; + hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL; if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 9db6aac0218..f71b3f3f81b 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -639,7 +639,6 @@ static void iwl_activate_qos(struct iwl_priv *priv, u8 force) } #define MAX_UCODE_BEACON_INTERVAL 4096 -#define INTEL_CONN_LISTEN_INTERVAL __constant_cpu_to_le16(0xA) static __le16 iwl4965_adjust_beacon_interval(u16 beacon_val) { @@ -669,7 +668,7 @@ static void iwl4965_setup_rxon_timing(struct iwl_priv *priv) priv->rxon_timing.timestamp.dw[0] = cpu_to_le32(priv->timestamp & 0xFFFFFFFF); - priv->rxon_timing.listen_interval = INTEL_CONN_LISTEN_INTERVAL; + priv->rxon_timing.listen_interval = cpu_to_le16(conf->listen_interval); tsf = priv->timestamp; @@ -2835,6 +2834,7 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co spin_lock_irqsave(&priv->lock, flags); + /* if we are switching from ht to 2.4 clear flags * from any ht related info since 2.4 does not * support ht */ @@ -3164,6 +3164,7 @@ static void iwl4965_bss_info_changed(struct ieee80211_hw *hw, if (bss_conf->assoc) { priv->assoc_id = bss_conf->aid; priv->beacon_int = bss_conf->beacon_int; + priv->power_data.dtim_period = bss_conf->dtim_period; priv->timestamp = bss_conf->timestamp; priv->assoc_capability = bss_conf->assoc_capability; priv->next_scan_jiffies = jiffies + -- GitLab From 80693ceb78b08baa3b66a900d9225b2cf9c6f0ed Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Sat, 19 Jul 2008 23:31:17 +0100 Subject: [PATCH 0711/1024] mac80211: automatic IBSS channel selection When joining an ad-hoc network, the user is currently required to specify the channel. The network will not be joined otherwise, unless it happens to be sitting on the currently active channel. This patch implements automatic channel selection when the user has not locked the interface onto a specific channel. Signed-off-by: Daniel Drake Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 779affd8b8f..5358420d879 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3663,11 +3663,21 @@ static int ieee80211_sta_find_ibss(struct net_device *dev, "%s\n", print_mac(mac, bssid), print_mac(mac2, ifsta->bssid)); #endif /* CONFIG_MAC80211_IBSS_DEBUG */ - if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0 && - (bss = ieee80211_rx_bss_get(dev, bssid, - local->hw.conf.channel->center_freq, - ifsta->ssid, ifsta->ssid_len))) { + + if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0) { int ret; + int search_freq; + + if (ifsta->flags & IEEE80211_STA_AUTO_CHANNEL_SEL) + search_freq = bss->freq; + else + search_freq = local->hw.conf.channel->center_freq; + + bss = ieee80211_rx_bss_get(dev, bssid, search_freq, + ifsta->ssid, ifsta->ssid_len); + if (!bss) + goto dont_join; + printk(KERN_DEBUG "%s: Selected IBSS BSSID %s" " based on configured SSID\n", dev->name, print_mac(mac, bssid)); @@ -3675,6 +3685,8 @@ static int ieee80211_sta_find_ibss(struct net_device *dev, ieee80211_rx_bss_put(local, bss); return ret; } + +dont_join: #ifdef CONFIG_MAC80211_IBSS_DEBUG printk(KERN_DEBUG " did not try to join ibss\n"); #endif /* CONFIG_MAC80211_IBSS_DEBUG */ -- GitLab From 25bc2deda9e8a430ed49f507a1120fb2c86abf33 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 21 Jul 2008 02:40:13 +0300 Subject: [PATCH 0712/1024] iwlwifi: rename iwl4965-base.c to iwl-agn.c This patch renames iwl4965-base.c to iwl-agn.c Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/Makefile | 6 ++---- drivers/net/wireless/iwlwifi/{iwl4965-base.c => iwl-agn.c} | 0 2 files changed, 2 insertions(+), 4 deletions(-) rename drivers/net/wireless/iwlwifi/{iwl4965-base.c => iwl-agn.c} (100%) diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index f50d2f8fd5c..6bf3998736b 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -11,10 +11,8 @@ iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl3945-$(CONFIG_IWL3945_LEDS) += iwl-3945-led.o obj-$(CONFIG_IWL4965) += iwl4965.o -iwl4965-objs := iwl4965-base.o iwl-4965.o iwl-agn-rs.o +iwl4965-objs := iwl-agn.o iwl-4965.o iwl-agn-rs.o -ifeq ($(CONFIG_IWL5000),y) - iwl4965-objs += iwl-5000.o -endif +iwl4965-$(CONFIG_IWL5000) += iwl-5000.o diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl-agn.c similarity index 100% rename from drivers/net/wireless/iwlwifi/iwl4965-base.c rename to drivers/net/wireless/iwlwifi/iwl-agn.c -- GitLab From 3ac7f14694dd38273d9d96f1c873233d71190c15 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 21 Jul 2008 02:40:14 +0300 Subject: [PATCH 0713/1024] iwlwifi: fix checkpatch.pl errors This patch fixes errors reported by checkpatch in iwlwifi drivers Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945.c | 7 ++- drivers/net/wireless/iwlwifi/iwl-4965.c | 4 +- drivers/net/wireless/iwlwifi/iwl-5000.c | 2 +- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 16 +++---- drivers/net/wireless/iwlwifi/iwl-agn.c | 10 ++-- drivers/net/wireless/iwlwifi/iwl-core.c | 4 +- drivers/net/wireless/iwlwifi/iwl-debug.h | 4 +- drivers/net/wireless/iwlwifi/iwl-debugfs.c | 11 +++-- drivers/net/wireless/iwlwifi/iwl-eeprom.c | 3 +- drivers/net/wireless/iwlwifi/iwl-sta.c | 2 +- drivers/net/wireless/iwlwifi/iwl3945-base.c | 52 +++++++++------------ 11 files changed, 55 insertions(+), 60 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 56a9361a847..b3931f6135a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -795,8 +795,7 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv, struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)header; __le32 *pos; - pos = - (__le32 *) & mgmt->u.beacon. + pos = (__le32 *)&mgmt->u.beacon. timestamp; priv->timestamp0 = le32_to_cpu(pos[0]); priv->timestamp1 = le32_to_cpu(pos[1]); @@ -1509,7 +1508,7 @@ static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading) */ static inline int iwl3945_hw_reg_temp_out_of_range(int temperature) { - return (((temperature < -260) || (temperature > 25)) ? 1 : 0); + return ((temperature < -260) || (temperature > 25)) ? 1 : 0; } int iwl3945_hw_get_temperature(struct iwl3945_priv *priv) @@ -2630,7 +2629,7 @@ unsigned int iwl3945_hw_get_beacon_cmd(struct iwl3945_priv *priv, tx_beacon_cmd->tx.supp_rates[1] = (IWL_CCK_BASIC_RATES_MASK & 0xF); - return (sizeof(struct iwl3945_tx_beacon_cmd) + frame_size); + return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size; } void iwl3945_hw_rx_handler_setup(struct iwl3945_priv *priv) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index f356f4f0944..718f9d9e494 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -1515,11 +1515,11 @@ static int iwl4965_fill_txpower_tbl(struct iwl_priv *priv, u8 band, u16 channel, c, atten_value, power_index, tx_power.s.radio_tx_gain[c], tx_power.s.dsp_predis_atten[c]); - }/* for each chain */ + } /* for each chain */ tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw); - }/* for each rate */ + } /* for each rate */ return 0; } diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 076d3560302..f7bbd12193f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1131,7 +1131,7 @@ static void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask) static inline u32 iwl5000_get_scd_ssn(struct iwl5000_tx_resp *tx_resp) { - return le32_to_cpup((__le32*)&tx_resp->status + + return le32_to_cpup((__le32 *)&tx_resp->status + tx_resp->frame_count) & MAX_SN; } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index b498b58d81f..754fef5b592 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -245,7 +245,7 @@ static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window) static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) { - return ((ant_type & valid_antenna) == ant_type); + return (ant_type & valid_antenna) == ant_type; } /* @@ -384,9 +384,9 @@ static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, static inline int get_num_of_ant_from_rate(u32 rate_n_flags) { - return (!!(rate_n_flags & RATE_MCS_ANT_A_MSK) + - !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + - !!(rate_n_flags & RATE_MCS_ANT_C_MSK)); + return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + + !!(rate_n_flags & RATE_MCS_ANT_C_MSK); } /** @@ -620,9 +620,9 @@ static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, #if 0 static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf) { - return ((conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && + return (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && priv->current_ht_config.is_green_field && - !priv->current_ht_config.non_GF_STA_present); + !priv->current_ht_config.non_GF_STA_present; } #endif static inline u8 rs_use_green(struct iwl_priv *priv, struct ieee80211_conf *conf) @@ -2157,7 +2157,7 @@ static void *rs_alloc_sta(void *priv_rate, gfp_t gfp) for (j = 0; j < LQ_SIZE; j++) for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i])); + rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); return lq_sta; } @@ -2179,7 +2179,7 @@ static void rs_rate_init(void *priv_rate, void *priv_sta, sta->txrate_idx = 3; for (j = 0; j < LQ_SIZE; j++) for (i = 0; i < IWL_RATE_COUNT; i++) - rs_rate_scale_clear_window(&(lq_sta->lq_info[j].win[i])); + rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); IWL_DEBUG_RATE("LQ: *** rate scale global init ***\n"); /* TODO: what is a good starting rate for STA? About middle? Maybe not diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index f71b3f3f81b..4ff0636dbdd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2476,7 +2476,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv) unsigned long flags; if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__); + IWL_ERROR("%s Should not be called in AP mode\n", __func__); return; } @@ -2552,7 +2552,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv) default: IWL_ERROR("%s Should not be called in %d mode\n", - __FUNCTION__, priv->iw_mode); + __func__, priv->iw_mode); break; } @@ -3794,7 +3794,7 @@ static ssize_t show_measurement(struct device *d, struct iwl_priv *priv = dev_get_drvdata(d); struct iwl4965_spectrum_notification measure_report; u32 size = sizeof(measure_report), len = 0, ofs = 0; - u8 *data = (u8 *) & measure_report; + u8 *data = (u8 *)&measure_report; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); @@ -3934,7 +3934,7 @@ static ssize_t show_power_level(struct device *d, p += sprintf(p, "\tMODE:%s", (mode < IWL_POWER_AUTO)?"fixed":"auto"); p += sprintf(p, "\tINDEX:%d", level); p += sprintf(p, "\n"); - return (p - buf + 1); + return p - buf + 1; } static DEVICE_ATTR(power_level, S_IWUSR | S_IRUSR, show_power_level, @@ -4009,7 +4009,7 @@ static ssize_t show_statistics(struct device *d, struct iwl_priv *priv = dev_get_drvdata(d); u32 size = sizeof(struct iwl_notif_statistics); u32 len = 0, ofs = 0; - u8 *data = (u8 *) & priv->statistics; + u8 *data = (u8 *)&priv->statistics; int rc = 0; if (!iwl_is_alive(priv)) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 96beacf703a..9bd61809129 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -383,8 +383,8 @@ void iwl_reset_qos(struct iwl_priv *priv) } EXPORT_SYMBOL(iwl_reset_qos); -#define MAX_BIT_RATE_40_MHZ 0x96; /* 150 Mbps */ -#define MAX_BIT_RATE_20_MHZ 0x48; /* 72 Mbps */ +#define MAX_BIT_RATE_40_MHZ 0x96 /* 150 Mbps */ +#define MAX_BIT_RATE_20_MHZ 0x48 /* 72 Mbps */ static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, struct ieee80211_ht_info *ht_info, enum ieee80211_band band) diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h index d6d729e86bd..b4ffd33ef98 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debug.h +++ b/drivers/net/wireless/iwlwifi/iwl-debug.h @@ -33,12 +33,12 @@ #define IWL_DEBUG(level, fmt, args...) \ do { if (priv->debug_level & (level)) \ dev_printk(KERN_ERR, &(priv->hw->wiphy->dev), "%c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) #define IWL_DEBUG_LIMIT(level, fmt, args...) \ do { if ((priv->debug_level & (level)) && net_ratelimit()) \ dev_printk(KERN_ERR, &(priv->hw->wiphy->dev), "%c %s " fmt, \ - in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0) + in_interrupt() ? 'I' : 'U', __func__ , ## args); } while (0) #ifdef CONFIG_IWLWIFI_DEBUGFS struct iwl_debugfs { diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c index ed948dc59b3..20db0eb636a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c @@ -231,7 +231,7 @@ static ssize_t iwl_dbgfs_stations_read(struct file *file, char __user *user_buf, DECLARE_MAC_BUF(mac); buf = kmalloc(bufsz, GFP_KERNEL); - if(!buf) + if (!buf) return -ENOMEM; pos += scnprintf(buf + pos, bufsz - pos, "num of stations: %d\n\n", @@ -364,16 +364,19 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name) { struct iwl_debugfs *dbgfs; struct dentry *phyd = priv->hw->wiphy->debugfsdir; + int ret = 0; dbgfs = kzalloc(sizeof(struct iwl_debugfs), GFP_KERNEL); if (!dbgfs) { + ret = -ENOMEM; goto err; } priv->dbgfs = dbgfs; dbgfs->name = name; dbgfs->dir_drv = debugfs_create_dir(name, phyd); - if (!dbgfs->dir_drv || IS_ERR(dbgfs->dir_drv)){ + if (!dbgfs->dir_drv || IS_ERR(dbgfs->dir_drv)) { + ret = -ENOENT; goto err; } @@ -394,7 +397,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name) err: IWL_ERROR("Can't open the debugfs directory\n"); iwl_dbgfs_unregister(priv); - return -ENOENT; + return ret; } EXPORT_SYMBOL(iwl_dbgfs_register); @@ -404,7 +407,7 @@ EXPORT_SYMBOL(iwl_dbgfs_register); */ void iwl_dbgfs_unregister(struct iwl_priv *priv) { - if (!(priv->dbgfs)) + if (!priv->dbgfs) return; DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_eeprom); diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c index 4a08a1b5097..bce53830b30 100644 --- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c +++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c @@ -273,8 +273,7 @@ EXPORT_SYMBOL(iwl_eeprom_init); void iwl_eeprom_free(struct iwl_priv *priv) { - if(priv->eeprom) - kfree(priv->eeprom); + kfree(priv->eeprom); priv->eeprom = NULL; } EXPORT_SYMBOL(iwl_eeprom_free); diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 10af82170f6..60a6e010603 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -823,7 +823,7 @@ int iwl_send_lq_cmd(struct iwl_priv *priv, if (lq->sta_id == 0xFF) lq->sta_id = IWL_AP_ID; - iwl_dump_lq_cmd(priv,lq); + iwl_dump_lq_cmd(priv, lq); if (iwl_is_associated(priv) && priv->assoc_station_added) return iwl_send_cmd(priv, &cmd); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 7c82ecfa30a..eb41b02b506 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -275,10 +275,8 @@ static int iwl3945_tx_queue_alloc(struct iwl3945_priv *priv, return 0; error: - if (txq->txb) { - kfree(txq->txb); - txq->txb = NULL; - } + kfree(txq->txb); + txq->txb = NULL; return -ENOMEM; } @@ -365,10 +363,8 @@ void iwl3945_tx_queue_free(struct iwl3945_priv *priv, struct iwl3945_tx_queue *t txq->q.n_bd, txq->bd, txq->q.dma_addr); /* De-alloc array of per-TFD driver data */ - if (txq->txb) { - kfree(txq->txb); - txq->txb = NULL; - } + kfree(txq->txb); + txq->txb = NULL; /* 0-fill queue descriptor structure */ memset(txq, 0, sizeof(*txq)); @@ -2703,9 +2699,8 @@ static int iwl3945_tx_skb(struct iwl3945_priv *priv, struct sk_buff *skb) if (!ieee80211_has_morefrags(hdr->frame_control)) { txq->need_update = 1; - if (qc) { + if (qc) priv->stations[sta_id].tid[tid].seq_number = seq_number; - } } else { wait_write_ptr = 1; txq->need_update = 0; @@ -3813,7 +3808,7 @@ int iwl3945_calc_db_from_ratio(int sig_ratio) /* 100:1 or higher, divide by 10 and use table, * add 20 dB to make up for divide by 10 */ if (sig_ratio >= 100) - return (20 + (int)ratio2dB[sig_ratio/10]); + return 20 + (int)ratio2dB[sig_ratio/10]; /* We shouldn't see this */ if (sig_ratio < 1) @@ -5088,7 +5083,7 @@ static void iwl3945_dealloc_ucode_pci(struct iwl3945_priv *priv) * iwl3945_verify_inst_full - verify runtime uCode image in card vs. host, * looking at all data. */ -static int iwl3945_verify_inst_full(struct iwl3945_priv *priv, __le32 * image, u32 len) +static int iwl3945_verify_inst_full(struct iwl3945_priv *priv, __le32 *image, u32 len) { u32 val; u32 save_len = len; @@ -5237,7 +5232,7 @@ static int iwl3945_verify_bsm(struct iwl3945_priv *priv) val = iwl3945_read_prph(priv, BSM_WR_DWCOUNT_REG); for (reg = BSM_SRAM_LOWER_BOUND; reg < BSM_SRAM_LOWER_BOUND + len; - reg += sizeof(u32), image ++) { + reg += sizeof(u32), image++) { val = iwl3945_read_prph(priv, reg); if (val != le32_to_cpu(*image)) { IWL_ERROR("BSM uCode verification failed at " @@ -6336,7 +6331,7 @@ static void iwl3945_bg_post_associate(struct work_struct *data) DECLARE_MAC_BUF(mac); if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { - IWL_ERROR("%s Should not be called in AP mode\n", __FUNCTION__); + IWL_ERROR("%s Should not be called in AP mode\n", __func__); return; } @@ -6417,7 +6412,7 @@ static void iwl3945_bg_post_associate(struct work_struct *data) default: IWL_ERROR("%s Should not be called in %d mode\n", - __FUNCTION__, priv->iw_mode); + __func__, priv->iw_mode); break; } @@ -7456,7 +7451,7 @@ static ssize_t show_measurement(struct device *d, struct iwl3945_priv *priv = dev_get_drvdata(d); struct iwl3945_spectrum_notification measure_report; u32 size = sizeof(measure_report), len = 0, ofs = 0; - u8 *data = (u8 *) & measure_report; + u8 *data = (u8 *)&measure_report; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); @@ -7627,7 +7622,7 @@ static ssize_t show_power_level(struct device *d, else p += sprintf(p, " \n"); - return (p - buf + 1); + return p - buf + 1; } @@ -7649,7 +7644,7 @@ static ssize_t show_statistics(struct device *d, struct iwl3945_priv *priv = dev_get_drvdata(d); u32 size = sizeof(struct iwl3945_notif_statistics); u32 len = 0, ofs = 0; - u8 *data = (u8 *) & priv->statistics; + u8 *data = (u8 *)&priv->statistics; int rc = 0; if (!iwl3945_is_alive(priv)) @@ -8003,16 +7998,16 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e /* nic init */ iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS, - CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); - - iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); - err = iwl3945_poll_bit(priv, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, - CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); - if (err < 0) { - IWL_DEBUG_INFO("Failed to init the card\n"); + CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER); + + iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + err = iwl3945_poll_bit(priv, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); + if (err < 0) { + IWL_DEBUG_INFO("Failed to init the card\n"); goto out_remove_sysfs; - } + } /* Read the EEPROM */ err = iwl3945_eeprom_init(priv); if (err) { @@ -8114,9 +8109,8 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) iwl3945_unset_hw_setting(priv); iwl3945_clear_stations_table(priv); - if (priv->mac80211_registered) { + if (priv->mac80211_registered) ieee80211_unregister_hw(priv->hw); - } /*netif_stop_queue(dev); */ flush_workqueue(priv->workqueue); -- GitLab From 4fc22b21b3fcb3580c32b70605ef114178f8e611 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 21 Jul 2008 18:54:42 +0300 Subject: [PATCH 0714/1024] iwlwifi: rename 4965 to AGN This patch renames driver name from 4965 to AGN The driver supports both 4965AGN and 5000AGN family The driver's original module name iwl4965.ko remains as an alias Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/Kconfig | 98 ++++++++++++++------------ drivers/net/wireless/iwlwifi/Makefile | 11 +-- drivers/net/wireless/iwlwifi/iwl-agn.c | 15 ++-- drivers/net/wireless/iwlwifi/iwl-dev.h | 7 +- 4 files changed, 68 insertions(+), 63 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index 82b66a3d3a5..b0ac0ce3fb9 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -14,18 +14,49 @@ config IWLWIFI_LEDS default n config IWLWIFI_RFKILL - boolean "IWLWIFI RF kill support" + boolean "Iwlwifi RF kill support" depends on IWLCORE -config IWL4965 - tristate "Intel Wireless WiFi 4965AGN" +config IWLWIFI_DEBUG + bool "Enable full debugging output in iwlagn driver" + depends on IWLCORE + ---help--- + This option will enable debug tracing output for the iwlwifi drivers + + This will result in the kernel module being ~100k larger. You can + control which debug output is sent to the kernel log by setting the + value in + + /sys/class/net/wlan0/device/debug_level + + This entry will only exist if this option is enabled. + + To set a value, simply echo an 8-byte hex value to the same file: + + % echo 0x43fff > /sys/class/net/wlan0/device/debug_level + + You can find the list of debug mask values in: + drivers/net/wireless/iwlwifi/iwl-debug.h + + If this is your first time using this driver, you should say Y here + as the debug information can assist others in helping you resolve + any problems you may encounter. + +config IWLWIFI_DEBUGFS + bool "Iwlwifi debugfs support" + depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS + ---help--- + Enable creation of debugfs files for the iwlwifi drivers. + +config IWLAGN + tristate "Intel Wireless WiFi Next Gen AGN" depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL select FW_LOADER select IWLCORE ---help--- Select to build the driver supporting the: - Intel Wireless WiFi Link 4965AGN + Intel Wireless WiFi Link Next-Gen AGN This driver uses the kernel's mac80211 subsystem. @@ -42,60 +73,33 @@ config IWL4965 If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read . The - module will be called iwl4965.ko. - -config IWL4965_LEDS - bool "Enable LEDS features in iwl4965 driver" - depends on IWL4965 - select IWLWIFI_LEDS - ---help--- - This option enables LEDS for the iwlwifi drivers + module will be called iwlagn.ko. - -config IWL4965_SPECTRUM_MEASUREMENT - bool "Enable Spectrum Measurement in iwl4965 driver" - depends on IWL4965 +config IWLAGN_SPECTRUM_MEASUREMENT + bool "Enable Spectrum Measurement in iwlagn driver" + depends on IWLAGN ---help--- - This option will enable spectrum measurement for the iwl4965 driver. + This option will enable spectrum measurement for the iwlagn driver. -config IWLWIFI_DEBUG - bool "Enable full debugging output in iwl4965 driver" - depends on IWL4965 +config IWLAGN_LEDS + bool "Enable LEDS features in iwlagn driver" + depends on IWLAGN + select IWLWIFI_LEDS ---help--- - This option will enable debug tracing output for the iwl4965 - driver. - - This will result in the kernel module being ~100k larger. You can - control which debug output is sent to the kernel log by setting the - value in - - /sys/class/net/wlan0/device/debug_level - - This entry will only exist if this option is enabled. - - To set a value, simply echo an 8-byte hex value to the same file: - - % echo 0x43fff > /sys/class/net/wlan0/device/debug_level + This option enables LEDS for the iwlagn drivers - You can find the list of debug mask values in: - drivers/net/wireless/iwlwifi/iwl-4965-debug.h - If this is your first time using this driver, you should say Y here - as the debug information can assist others in helping you resolve - any problems you may encounter. +config IWL4965 + bool "Intel Wireless WiFi 4965AGN" + depends on IWLAGN + ---help--- + This option enables support for Intel Wireless WiFi Link 4965AGN config IWL5000 bool "Intel Wireless WiFi 5000AGN" - depends on IWL4965 + depends on IWLAGN ---help--- This option enables support for Intel Wireless WiFi Link 5000AGN Family - Dependency on 4965 is temporary - -config IWLWIFI_DEBUGFS - bool "Iwlwifi debugfs support" - depends on IWLCORE && IWLWIFI_DEBUG && MAC80211_DEBUGFS - ---help--- - Enable creation of debugfs files for the iwlwifi drivers. config IWL3945 tristate "Intel PRO/Wireless 3945ABG/BG Network Connection" diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index 6bf3998736b..47aa28f6a51 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -6,13 +6,14 @@ iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o iwlcore-$(CONFIG_IWLWIFI_RFKILL) += iwl-rfkill.o +obj-$(CONFIG_IWLAGN) += iwlagn.o +iwlagn-objs := iwl-agn.o iwl-agn-rs.o + +iwlagn-$(CONFIG_IWL4965) += iwl-4965.o +iwlagn-$(CONFIG_IWL5000) += iwl-5000.o + obj-$(CONFIG_IWL3945) += iwl3945.o iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl3945-$(CONFIG_IWL3945_LEDS) += iwl-3945-led.o -obj-$(CONFIG_IWL4965) += iwl4965.o -iwl4965-objs := iwl-agn.o iwl-4965.o iwl-agn-rs.o - -iwl4965-$(CONFIG_IWL5000) += iwl-5000.o - diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 4ff0636dbdd..6503b3ac8d6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -73,7 +73,7 @@ #define VD #endif -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT #define VS "s" #else #define VS @@ -86,6 +86,7 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION); MODULE_VERSION(DRV_VERSION); MODULE_AUTHOR(DRV_COPYRIGHT); MODULE_LICENSE("GPL"); +MODULE_ALIAS("iwl4965"); /*************** STATION TABLE MANAGEMENT **** * mac80211 should be examined to determine if sta_info is duplicating @@ -883,7 +884,7 @@ static void iwl4965_set_rate(struct iwl_priv *priv) (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; } -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT #include "iwl-spectrum.h" @@ -1087,7 +1088,7 @@ static void iwl4965_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) static void iwl4965_rx_spectrum_measure_notif(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) { -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; struct iwl4965_spectrum_notification *report = &(pkt->u.spectrum_notif); @@ -3786,7 +3787,7 @@ static ssize_t store_filter_flags(struct device *d, static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, show_filter_flags, store_filter_flags); -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT static ssize_t show_measurement(struct device *d, struct device_attribute *attr, char *buf) @@ -3857,7 +3858,7 @@ static ssize_t store_measurement(struct device *d, static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR, show_measurement, store_measurement); -#endif /* CONFIG_IWL4965_SPECTRUM_MEASUREMENT */ +#endif /* CONFIG_IWLAGN_SPECTRUM_MEASUREMENT */ static ssize_t store_retry_rate(struct device *d, struct device_attribute *attr, @@ -4105,7 +4106,7 @@ static struct attribute *iwl4965_sysfs_entries[] = { &dev_attr_channels.attr, &dev_attr_flags.attr, &dev_attr_filter_flags.attr, -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT &dev_attr_measurement.attr, #endif &dev_attr_power_level.attr, @@ -4457,8 +4458,10 @@ static int iwl4965_pci_resume(struct pci_dev *pdev) /* Hardware specific file defines the PCI IDs table for that hardware module */ static struct pci_device_id iwl_hw_card_ids[] = { +#ifdef CONFIG_IWL4965 {IWL_PCI_DEVICE(0x4229, PCI_ANY_ID, iwl4965_agn_cfg)}, {IWL_PCI_DEVICE(0x4230, PCI_ANY_ID, iwl4965_agn_cfg)}, +#endif /* CONFIG_IWL4965 */ #ifdef CONFIG_IWL5000 {IWL_PCI_DEVICE(0x4232, 0x1205, iwl5100_bg_cfg)}, {IWL_PCI_DEVICE(0x4232, 0x1305, iwl5100_bg_cfg)}, diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 7ac56b1350b..848786ab791 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -36,7 +36,7 @@ #include #include -#define DRV_NAME "iwl4965" +#define DRV_NAME "iwlagn" #include "iwl-rfkill.h" #include "iwl-eeprom.h" #include "iwl-4965-hw.h" @@ -808,14 +808,11 @@ struct iwl_chain_noise_data { #define EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT - enum { MEASUREMENT_READY = (1 << 0), MEASUREMENT_ACTIVE = (1 << 1), }; -#endif #define IWL_MAX_NUM_QUEUES 20 /* FIXME: do dynamic allocation */ @@ -840,7 +837,7 @@ struct iwl_priv { struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS]; -#ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT +#ifdef CONFIG_IWLAGN_SPECTRUM_MEASUREMENT /* spectrum measurement report caching */ struct iwl4965_spectrum_notification measure_report; u8 measurement_status; -- GitLab From 5cbbb376d65ed181ed290cea505ba37a0425ee25 Mon Sep 17 00:00:00 2001 From: Sven Wegener Date: Fri, 1 Aug 2008 21:57:16 +0200 Subject: [PATCH 0715/1024] iwlwifi: Don't use buffer allocated on the stack for led names Having the buffer on the stack and even re-using it for all led devices is bad. Not being able to resolve the name member of the led device structure to a meaningful value leads to confusion during ad-hoc debugging and potential breakage in the future, if we ever decide to access the name member outside of the registration function. Move the buffer to our private per led device structures so that it is accessible after registration. A quick grep didn't yield any occurence of using the led device name parameter outside of the led device registration function, so currently we should already be safe for normal operation. Signed-off-by: Sven Wegener Cc: Richard Purdie Acked-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945-led.c | 33 +++++++++++---------- drivers/net/wireless/iwlwifi/iwl-3945-led.h | 1 + drivers/net/wireless/iwlwifi/iwl-led.c | 29 ++++++++++-------- drivers/net/wireless/iwlwifi/iwl-led.h | 1 + 4 files changed, 36 insertions(+), 28 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c index 6be1fe13fa5..d3336966b6b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c @@ -206,12 +206,12 @@ static void iwl3945_led_brightness_set(struct led_classdev *led_cdev, static int iwl3945_led_register_led(struct iwl3945_priv *priv, struct iwl3945_led *led, enum led_type type, u8 set_led, - const char *name, char *trigger) + char *trigger) { struct device *device = wiphy_dev(priv->hw->wiphy); int ret; - led->led_dev.name = name; + led->led_dev.name = led->name; led->led_dev.brightness_set = iwl3945_led_brightness_set; led->led_dev.default_trigger = trigger; @@ -308,7 +308,6 @@ void iwl3945_led_background(struct iwl3945_priv *priv) int iwl3945_led_register(struct iwl3945_priv *priv) { char *trigger; - char name[32]; int ret; priv->last_blink_rate = 0; @@ -318,7 +317,8 @@ int iwl3945_led_register(struct iwl3945_priv *priv) priv->allow_blinking = 0; trigger = ieee80211_get_radio_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:radio", + snprintf(priv->led[IWL_LED_TRG_RADIO].name, + sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s:radio", wiphy_name(priv->hw->wiphy)); priv->led[IWL_LED_TRG_RADIO].led_on = iwl3945_led_on; @@ -327,19 +327,20 @@ int iwl3945_led_register(struct iwl3945_priv *priv) ret = iwl3945_led_register_led(priv, &priv->led[IWL_LED_TRG_RADIO], - IWL_LED_TRG_RADIO, 1, - name, trigger); + IWL_LED_TRG_RADIO, 1, trigger); + if (ret) goto exit_fail; trigger = ieee80211_get_assoc_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:assoc", + snprintf(priv->led[IWL_LED_TRG_ASSOC].name, + sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s:assoc", wiphy_name(priv->hw->wiphy)); ret = iwl3945_led_register_led(priv, &priv->led[IWL_LED_TRG_ASSOC], - IWL_LED_TRG_ASSOC, 0, - name, trigger); + IWL_LED_TRG_ASSOC, 0, trigger); + /* for assoc always turn led on */ priv->led[IWL_LED_TRG_ASSOC].led_on = iwl3945_led_on; priv->led[IWL_LED_TRG_ASSOC].led_off = iwl3945_led_on; @@ -349,14 +350,13 @@ int iwl3945_led_register(struct iwl3945_priv *priv) goto exit_fail; trigger = ieee80211_get_rx_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:RX", + snprintf(priv->led[IWL_LED_TRG_RX].name, + sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s:RX", wiphy_name(priv->hw->wiphy)); - ret = iwl3945_led_register_led(priv, &priv->led[IWL_LED_TRG_RX], - IWL_LED_TRG_RX, 0, - name, trigger); + IWL_LED_TRG_RX, 0, trigger); priv->led[IWL_LED_TRG_RX].led_on = iwl3945_led_associated; priv->led[IWL_LED_TRG_RX].led_off = iwl3945_led_associated; @@ -366,13 +366,14 @@ int iwl3945_led_register(struct iwl3945_priv *priv) goto exit_fail; trigger = ieee80211_get_tx_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:TX", + snprintf(priv->led[IWL_LED_TRG_TX].name, + sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s:TX", wiphy_name(priv->hw->wiphy)); ret = iwl3945_led_register_led(priv, &priv->led[IWL_LED_TRG_TX], - IWL_LED_TRG_TX, 0, - name, trigger); + IWL_LED_TRG_TX, 0, trigger); + priv->led[IWL_LED_TRG_TX].led_on = iwl3945_led_associated; priv->led[IWL_LED_TRG_TX].led_off = iwl3945_led_associated; priv->led[IWL_LED_TRG_TX].led_pattern = iwl3945_led_pattern; diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.h b/drivers/net/wireless/iwlwifi/iwl-3945-led.h index 47b7e0bac80..2fbd126c134 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-led.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.h @@ -50,6 +50,7 @@ enum led_type { struct iwl3945_led { struct iwl3945_priv *priv; struct led_classdev led_dev; + char name[32]; int (*led_on) (struct iwl3945_priv *priv, int led_id); int (*led_off) (struct iwl3945_priv *priv, int led_id); diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c index 0a01f091c51..cb11c4a4d69 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-led.c @@ -242,12 +242,12 @@ static void iwl_led_brightness_set(struct led_classdev *led_cdev, */ static int iwl_leds_register_led(struct iwl_priv *priv, struct iwl_led *led, enum led_type type, u8 set_led, - const char *name, char *trigger) + char *trigger) { struct device *device = wiphy_dev(priv->hw->wiphy); int ret; - led->led_dev.name = name; + led->led_dev.name = led->name; led->led_dev.brightness_set = iwl_led_brightness_set; led->led_dev.default_trigger = trigger; @@ -345,7 +345,6 @@ EXPORT_SYMBOL(iwl_leds_background); int iwl_leds_register(struct iwl_priv *priv) { char *trigger; - char name[32]; int ret; priv->last_blink_rate = 0; @@ -354,7 +353,8 @@ int iwl_leds_register(struct iwl_priv *priv) priv->allow_blinking = 0; trigger = ieee80211_get_radio_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:radio", + snprintf(priv->led[IWL_LED_TRG_RADIO].name, + sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s:radio", wiphy_name(priv->hw->wiphy)); priv->led[IWL_LED_TRG_RADIO].led_on = iwl4965_led_on_reg; @@ -362,16 +362,17 @@ int iwl_leds_register(struct iwl_priv *priv) priv->led[IWL_LED_TRG_RADIO].led_pattern = NULL; ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RADIO], - IWL_LED_TRG_RADIO, 1, name, trigger); + IWL_LED_TRG_RADIO, 1, trigger); if (ret) goto exit_fail; trigger = ieee80211_get_assoc_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:assoc", + snprintf(priv->led[IWL_LED_TRG_ASSOC].name, + sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s:assoc", wiphy_name(priv->hw->wiphy)); ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_ASSOC], - IWL_LED_TRG_ASSOC, 0, name, trigger); + IWL_LED_TRG_ASSOC, 0, trigger); /* for assoc always turn led on */ priv->led[IWL_LED_TRG_ASSOC].led_on = iwl_led_associate; @@ -382,11 +383,12 @@ int iwl_leds_register(struct iwl_priv *priv) goto exit_fail; trigger = ieee80211_get_rx_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:RX", wiphy_name(priv->hw->wiphy)); - + snprintf(priv->led[IWL_LED_TRG_RX].name, + sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s:RX", + wiphy_name(priv->hw->wiphy)); ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RX], - IWL_LED_TRG_RX, 0, name, trigger); + IWL_LED_TRG_RX, 0, trigger); priv->led[IWL_LED_TRG_RX].led_on = iwl_led_associated; priv->led[IWL_LED_TRG_RX].led_off = iwl_led_associated; @@ -396,9 +398,12 @@ int iwl_leds_register(struct iwl_priv *priv) goto exit_fail; trigger = ieee80211_get_tx_led_name(priv->hw); - snprintf(name, sizeof(name), "iwl-%s:TX", wiphy_name(priv->hw->wiphy)); + snprintf(priv->led[IWL_LED_TRG_TX].name, + sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s:TX", + wiphy_name(priv->hw->wiphy)); + ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_TX], - IWL_LED_TRG_TX, 0, name, trigger); + IWL_LED_TRG_TX, 0, trigger); priv->led[IWL_LED_TRG_TX].led_on = iwl_led_associated; priv->led[IWL_LED_TRG_TX].led_off = iwl_led_associated; diff --git a/drivers/net/wireless/iwlwifi/iwl-led.h b/drivers/net/wireless/iwlwifi/iwl-led.h index 1980ae5a7e8..588c9ad20e8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-led.h +++ b/drivers/net/wireless/iwlwifi/iwl-led.h @@ -52,6 +52,7 @@ enum led_type { struct iwl_led { struct iwl_priv *priv; struct led_classdev led_dev; + char name[32]; int (*led_on) (struct iwl_priv *priv, int led_id); int (*led_off) (struct iwl_priv *priv, int led_id); -- GitLab From d06193f311102b2c990ec5f66b470ea49ecc73a4 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sun, 3 Aug 2008 23:36:01 +0200 Subject: [PATCH 0716/1024] rt2x00: Disable link tuning in rt2500usb In the legacy rt2570 driver the link tuner was never really called. And now the reason has finally become apparent: It breaks TX capabilities As soon as the device has been associated all following TX frames will be queued in the hardware and never transmitted to the air. Disabling sections of the link tuner did not have the expected result, but completely disabling the link tuner did have the right result (Both of my rt2570 devices came back to life). This should fix Fedora bug: 411481 v2: Fix typos Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2500usb.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index c6f6eb6e17a..cd5af656932 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -633,6 +633,16 @@ static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev) rt2x00dev->link.vgc_level = value; } +/* + * NOTE: This function is directly ported from legacy driver, but + * despite it being declared it was never called. Although link tuning + * sounds like a good idea, and usually works well for the other drivers, + * it does _not_ work with rt2500usb. Enabling this function will result + * in TX capabilities only until association kicks in. Immediately + * after the successful association all TX frames will be kept in the + * hardware queue and never transmitted. + */ +#if 0 static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev) { int rssi = rt2x00_get_link_rssi(&rt2x00dev->link); @@ -752,6 +762,9 @@ dynamic_cca_tune: rt2x00dev->link.vgc_level = r17; } } +#else +#define rt2500usb_link_tuner NULL +#endif /* * Initialization functions. @@ -1737,6 +1750,7 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags); __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags); + __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags); /* * Set the rssi offset. -- GitLab From 6041e2a08c50e3fcaf1e56422bfafda62c597cea Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 3 Aug 2008 17:58:36 -0500 Subject: [PATCH 0717/1024] p54: Fix potential concurrent access to private data Experience with the rtl8187 driver has shown that mac80211 can make calls to the config callback routine in rapid succession. This patch creates a mutex that protects the private data in several of the routines called by mac80211. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54.h | 1 + drivers/net/wireless/p54/p54common.c | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h index c6f27b9022f..cac9a515b82 100644 --- a/drivers/net/wireless/p54/p54.h +++ b/drivers/net/wireless/p54/p54.h @@ -52,6 +52,7 @@ struct p54_common { int (*open)(struct ieee80211_hw *dev); void (*stop)(struct ieee80211_hw *dev); int mode; + struct mutex conf_mutex; u8 mac_addr[ETH_ALEN]; u8 bssid[ETH_ALEN]; struct pda_iq_autocal_entry *iq_autocal; diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index ffaf7a6b681..4da89ea9b56 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -886,9 +886,12 @@ static void p54_remove_interface(struct ieee80211_hw *dev, static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) { int ret; + struct p54_common *priv = dev->priv; + mutex_lock(&priv->conf_mutex); ret = p54_set_freq(dev, cpu_to_le16(conf->channel->center_freq)); p54_set_vdcf(dev); + mutex_unlock(&priv->conf_mutex); return ret; } @@ -898,10 +901,12 @@ static int p54_config_interface(struct ieee80211_hw *dev, { struct p54_common *priv = dev->priv; + mutex_lock(&priv->conf_mutex); p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 0, 1, 0, 0xF642); p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 2, 0, 0, 0); p54_set_leds(dev, 1, !is_multicast_ether_addr(conf->bssid), 0); memcpy(priv->bssid, conf->bssid, ETH_ALEN); + mutex_unlock(&priv->conf_mutex); return 0; } @@ -1009,6 +1014,7 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len) } p54_init_vdcf(dev); + mutex_init(&priv->conf_mutex); return dev; } -- GitLab From 4c43e0d0ecd5196ed5c67f64ed2f1860770eed34 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 4 Aug 2008 16:00:39 +0800 Subject: [PATCH 0718/1024] iwlwifi: HW bug fixes This patch adds few HW bug fixes. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 15 +++++++++++++++ drivers/net/wireless/iwlwifi/iwl-csr.h | 10 +++++++++- drivers/net/wireless/iwlwifi/iwl-prph.h | 12 +++++++----- net/mac80211/mlme.c | 2 +- 4 files changed, 32 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index f7bbd12193f..1d793c093f1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -93,6 +93,13 @@ static int iwl5000_apm_init(struct iwl_priv *priv) iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); + /* Set FH wait treshold to maximum (HW error during stress W/A) */ + iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL); + + /* enable HAP INTA to move device L1a -> L0s */ + iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A); + iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL); /* set "initialization complete" bit to move adapter @@ -230,6 +237,14 @@ static void iwl5000_nic_config(struct iwl_priv *priv) CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI | CSR_HW_IF_CONFIG_REG_BIT_MAC_SI); + /* W/A : NIC is stuck in a reset state after Early PCIe power off + * (PCIe power is lost before PERST# is asserted), + * causing ME FW to lose ownership and not being able to obtain it back. + */ + iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS, + ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS); + spin_unlock_irqrestore(&priv->lock, flags); } diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index 545ed692d88..52629fbd835 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -104,6 +104,7 @@ * 3-2: 0 = A, 1 = B, 2 = C, 3 = D step */ #define CSR_HW_REV_WA_REG (CSR_BASE+0x22C) +#define CSR_DBG_HPET_MEM_REG (CSR_BASE+0x240) /* Bits for CSR_HW_IF_CONFIG_REG */ #define CSR49_HW_IF_CONFIG_REG_BIT_4965_R (0x00000010) @@ -118,7 +119,12 @@ #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A (0x00000000) #define CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B (0x00001000) -#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) +#define CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A (0x00080000) +#define CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM (0x00200000) +#define CSR_HW_IF_CONFIG_REG_BIT_PCI_OWN_SEM (0x00400000) +#define CSR_HW_IF_CONFIG_REG_BIT_ME_OWN (0x02000000) +#define CSR_HW_IF_CONFIG_REG_BIT_WAKE_ME (0x08000000) + /* interrupt flags in INTA, set by uCode or hardware (e.g. dma), * acknowledged (reset) by host writing "1" to flagged bits. */ @@ -236,6 +242,8 @@ #define CSR39_ANA_PLL_CFG_VAL (0x01000000) #define CSR50_ANA_PLL_CFG_VAL (0x00880300) +/* HPET MEM debug */ +#define CSR_DBG_HPET_MEM_REG_VAL (0xFFFF0000) /*=== HBUS (Host-side Bus) ===*/ #define HBUS_BASE (0x400) /* diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index 70d9c7568b9..ee5afd48d3a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -84,14 +84,16 @@ #define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200) #define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800) -#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000) -#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) +#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000) +#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000) +#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000) +#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000) +#define APMG_PS_CTRL_VAL_PWR_SRC_MAX (0x01000000) /* 3945 only */ +#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000) -#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000) -#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000) -#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x01000000) +#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) /** * BSM (Bootstrap State Machine) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 5358420d879..e1d11c9b672 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3920,7 +3920,7 @@ done: if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { struct ieee80211_if_sta *ifsta = &sdata->u.sta; if (!(ifsta->flags & IEEE80211_STA_BSSID_SET) || - (!ifsta->state == IEEE80211_IBSS_JOINED && + (!(ifsta->state == IEEE80211_IBSS_JOINED) && !ieee80211_sta_active_ibss(dev))) ieee80211_sta_find_ibss(dev, ifsta); } -- GitLab From da99c4b6c25964b90c79f19beccda208df1a865a Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Mon, 4 Aug 2008 16:00:40 +0800 Subject: [PATCH 0719/1024] iwlwifi: memory allocation optimization This patch optimizes memory allocation. The cmd member of iwl_tx_queue was allocated previously as a continuous block of memory. This patch allocates separate memory chunks for each command and maps/unmaps these chunks in the run time. Signed-off-by: Gregory Greenman Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 6 +- drivers/net/wireless/iwlwifi/iwl-dev.h | 3 +- drivers/net/wireless/iwlwifi/iwl-hcmd.c | 2 +- drivers/net/wireless/iwlwifi/iwl-tx.c | 76 ++++++++++++++++++------- 4 files changed, 59 insertions(+), 28 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 1d793c093f1..56dbc8144a3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -939,8 +939,8 @@ static void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv, len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE; if (txq_id != IWL_CMD_QUEUE_NUM) { - sta = txq->cmd[txq->q.write_ptr].cmd.tx.sta_id; - sec_ctl = txq->cmd[txq->q.write_ptr].cmd.tx.sec_ctl; + sta = txq->cmd[txq->q.write_ptr]->cmd.tx.sta_id; + sec_ctl = txq->cmd[txq->q.write_ptr]->cmd.tx.sec_ctl; switch (sec_ctl & TX_CMD_SEC_MSK) { case TX_CMD_SEC_CCM: @@ -979,7 +979,7 @@ static void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv, u8 sta = 0; if (txq_id != IWL_CMD_QUEUE_NUM) - sta = txq->cmd[txq->q.read_ptr].cmd.tx.sta_id; + sta = txq->cmd[txq->q.read_ptr]->cmd.tx.sta_id; shared_data->queues_byte_cnt_tbls[txq_id].tfd_offset[txq->q.read_ptr]. val = cpu_to_le16(1 | (sta << 12)); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 848786ab791..c19db438306 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -135,8 +135,7 @@ struct iwl_tx_info { struct iwl_tx_queue { struct iwl_queue q; struct iwl_tfd_frame *bd; - struct iwl_cmd *cmd; - dma_addr_t dma_addr_cmd; + struct iwl_cmd *cmd[TFD_TX_CMD_SLOTS]; struct iwl_tx_info *txb; int need_update; int sched_retry; diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index 8fa991b7202..6512834bb91 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -228,7 +228,7 @@ cancel: * TX cmd queue. Otherwise in case the cmd comes * in later, it will possibly set an invalid * address (cmd->meta.source). */ - qcmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx]; + qcmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_idx]; qcmd->meta.flags &= ~CMD_WANT_SKB; } fail: diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 39f19ebee97..aa98c76d819 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -208,11 +208,12 @@ EXPORT_SYMBOL(iwl_txq_update_write_ptr); * Free all buffers. * 0-fill, but do not free "txq" descriptor structure. */ -static void iwl_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq) +static void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id) { + struct iwl_tx_queue *txq = &priv->txq[txq_id]; struct iwl_queue *q = &txq->q; struct pci_dev *dev = priv->pci_dev; - int len; + int i, slots_num, len; if (q->n_bd == 0) return; @@ -227,7 +228,12 @@ static void iwl_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq) len += IWL_MAX_SCAN_SIZE; /* De-alloc array of command/tx buffers */ - pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd); + slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ? + TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS; + for (i = 0; i < slots_num; i++) + kfree(txq->cmd[i]); + if (txq_id == IWL_CMD_QUEUE_NUM) + kfree(txq->cmd[slots_num]); /* De-alloc circular buffer of TFDs */ if (txq->q.n_bd) @@ -400,8 +406,7 @@ static int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq, int slots_num, u32 txq_id) { - struct pci_dev *dev = priv->pci_dev; - int len; + int i, len; int rc = 0; /* @@ -412,17 +417,25 @@ static int iwl_tx_queue_init(struct iwl_priv *priv, * For normal Tx queues (all other queues), no super-size command * space is needed. */ - len = sizeof(struct iwl_cmd) * slots_num; - if (txq_id == IWL_CMD_QUEUE_NUM) - len += IWL_MAX_SCAN_SIZE; - txq->cmd = pci_alloc_consistent(dev, len, &txq->dma_addr_cmd); - if (!txq->cmd) - return -ENOMEM; + len = sizeof(struct iwl_cmd); + for (i = 0; i <= slots_num; i++) { + if (i == slots_num) { + if (txq_id == IWL_CMD_QUEUE_NUM) + len += IWL_MAX_SCAN_SIZE; + else + continue; + } + + txq->cmd[i] = kmalloc(len, GFP_KERNEL | GFP_DMA); + if (!txq->cmd[i]) + return -ENOMEM; + } /* Alloc driver data array and TFD circular buffer */ rc = iwl_tx_queue_alloc(priv, txq, txq_id); if (rc) { - pci_free_consistent(dev, len, txq->cmd, txq->dma_addr_cmd); + for (i = 0; i < slots_num; i++) + kfree(txq->cmd[i]); return -ENOMEM; } @@ -451,7 +464,7 @@ void iwl_hw_txq_ctx_free(struct iwl_priv *priv) /* Tx queues */ for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) - iwl_tx_queue_free(priv, &priv->txq[txq_id]); + iwl_tx_queue_free(priv, txq_id); /* Keep-warm buffer */ iwl_kw_free(priv); @@ -859,7 +872,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) txq->txb[q->write_ptr].skb[0] = skb; /* Set up first empty entry in queue's array of Tx/cmd buffers */ - out_cmd = &txq->cmd[idx]; + out_cmd = txq->cmd[idx]; tx_cmd = &out_cmd->cmd.tx; memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr)); memset(tx_cmd, 0, sizeof(struct iwl_tx_cmd)); @@ -899,8 +912,9 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) /* Physical address of this Tx command's header (not MAC header!), * within command buffer array. */ - txcmd_phys = txq->dma_addr_cmd + sizeof(struct iwl_cmd) * idx + - offsetof(struct iwl_cmd, hdr); + txcmd_phys = pci_map_single(priv->pci_dev, out_cmd, + sizeof(struct iwl_cmd), PCI_DMA_TODEVICE); + txcmd_phys += offsetof(struct iwl_cmd, hdr); /* Add buffer containing Tx command and MAC(!) header to TFD's * first entry */ @@ -1004,7 +1018,7 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) u32 idx; u16 fix_size; dma_addr_t phys_addr; - int ret; + int len, ret; unsigned long flags; cmd->len = priv->cfg->ops->utils->get_hcmd_size(cmd->id, cmd->len); @@ -1034,7 +1048,7 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) control_flags = (u32 *) tfd; idx = get_cmd_index(q, q->write_ptr, cmd->meta.flags & CMD_SIZE_HUGE); - out_cmd = &txq->cmd[idx]; + out_cmd = txq->cmd[idx]; out_cmd->hdr.cmd = cmd->id; memcpy(&out_cmd->meta, &cmd->meta, sizeof(cmd->meta)); @@ -1048,9 +1062,11 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) INDEX_TO_SEQ(q->write_ptr)); if (out_cmd->meta.flags & CMD_SIZE_HUGE) out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME); - - phys_addr = txq->dma_addr_cmd + sizeof(txq->cmd[0]) * idx + - offsetof(struct iwl_cmd, hdr); + len = (idx == TFD_CMD_SLOTS) ? + IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd); + phys_addr = pci_map_single(priv->pci_dev, out_cmd, len, + PCI_DMA_TODEVICE); + phys_addr += offsetof(struct iwl_cmd, hdr); iwl_hw_txq_attach_buf_to_tfd(priv, tfd, phys_addr, fix_size); IWL_DEBUG_HC("Sending command %s (#%x), seq: 0x%04X, " @@ -1115,6 +1131,9 @@ static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) { struct iwl_tx_queue *txq = &priv->txq[txq_id]; struct iwl_queue *q = &txq->q; + struct iwl_tfd_frame *bd = &txq->bd[index]; + dma_addr_t dma_addr; + int is_odd, buf_len; int nfreed = 0; if ((index >= q->n_bd) || (iwl_queue_used(q, index) == 0)) { @@ -1132,6 +1151,19 @@ static void iwl_hcmd_queue_reclaim(struct iwl_priv *priv, int txq_id, int index) q->write_ptr, q->read_ptr); queue_work(priv->workqueue, &priv->restart); } + is_odd = (index/2) & 0x1; + if (is_odd) { + dma_addr = IWL_GET_BITS(bd->pa[index], tb2_addr_lo16) | + (IWL_GET_BITS(bd->pa[index], + tb2_addr_hi20) << 16); + buf_len = IWL_GET_BITS(bd->pa[index], tb2_len); + } else { + dma_addr = le32_to_cpu(bd->pa[index].tb1_addr); + buf_len = IWL_GET_BITS(bd->pa[index], tb1_len); + } + + pci_unmap_single(priv->pci_dev, dma_addr, buf_len, + PCI_DMA_TODEVICE); nfreed++; } } @@ -1163,7 +1195,7 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) BUG_ON(txq_id != IWL_CMD_QUEUE_NUM); cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge); - cmd = &priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index]; + cmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index]; /* Input error checking is done when commands are added to queue. */ if (cmd->meta.flags & CMD_WANT_SKB) { -- GitLab From caab8f1a5d0da583b6ffe41afea2774c676444ca Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 4 Aug 2008 16:00:42 +0800 Subject: [PATCH 0720/1024] iwlwifi: implement iwl5000_calc_rssi This patch implements rssi calculation for 5000 HW. Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965.c | 35 ++++++++++++ drivers/net/wireless/iwlwifi/iwl-5000.c | 39 ++++++++++++++ drivers/net/wireless/iwlwifi/iwl-commands.h | 35 +++++++++--- drivers/net/wireless/iwlwifi/iwl-core.h | 2 + drivers/net/wireless/iwlwifi/iwl-rx.c | 59 ++++++--------------- 5 files changed, 119 insertions(+), 51 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index 718f9d9e494..22bb26985c2 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2258,6 +2258,40 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, IWL_ERROR("TODO: Implement Tx ABORT REQUIRED!!!\n"); } +static int iwl4965_calc_rssi(struct iwl_priv *priv, + struct iwl_rx_phy_res *rx_resp) +{ + /* data from PHY/DSP regarding signal strength, etc., + * contents are always there, not configurable by host. */ + struct iwl4965_rx_non_cfg_phy *ncphy = + (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf; + u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL49_AGC_DB_MASK) + >> IWL49_AGC_DB_POS; + + u32 valid_antennae = + (le16_to_cpu(rx_resp->phy_flags) & IWL49_RX_PHY_FLAGS_ANTENNAE_MASK) + >> IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET; + u8 max_rssi = 0; + u32 i; + + /* Find max rssi among 3 possible receivers. + * These values are measured by the digital signal processor (DSP). + * They should stay fairly constant even as the signal strength varies, + * if the radio's automatic gain control (AGC) is working right. + * AGC value (see below) will provide the "interesting" info. */ + for (i = 0; i < 3; i++) + if (valid_antennae & (1 << i)) + max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); + + IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", + ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], + max_rssi, agc); + + /* dBm = max_rssi dB - agc dB - constant. + * Higher AGC (higher radio gain) means lower signal. */ + return max_rssi - agc - IWL_RSSI_OFFSET; +} + /* Set up 4965-specific Rx frame reply handlers */ static void iwl4965_rx_handler_setup(struct iwl_priv *priv) @@ -2289,6 +2323,7 @@ static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = { .chain_noise_reset = iwl4965_chain_noise_reset, .gain_computation = iwl4965_gain_computation, .rts_tx_cmd_flag = iwl4965_rts_tx_cmd_flag, + .calc_rssi = iwl4965_calc_rssi, }; static struct iwl_lib_ops iwl4965_lib = { diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 56dbc8144a3..c5b104fd149 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1459,6 +1459,44 @@ static void iwl5000_temperature(struct iwl_priv *priv) priv->temperature = le32_to_cpu(priv->statistics.general.temperature); } +/* Calc max signal level (dBm) among 3 possible receivers */ +static int iwl5000_calc_rssi(struct iwl_priv *priv, + struct iwl_rx_phy_res *rx_resp) +{ + /* data from PHY/DSP regarding signal strength, etc., + * contents are always there, not configurable by host + */ + struct iwl5000_non_cfg_phy *ncphy = + (struct iwl5000_non_cfg_phy *)rx_resp->non_cfg_phy_buf; + u32 val, rssi_a, rssi_b, rssi_c, max_rssi; + u8 agc; + + val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_AGC_IDX]); + agc = (val & IWL50_OFDM_AGC_MSK) >> IWL50_OFDM_AGC_BIT_POS; + + /* Find max rssi among 3 possible receivers. + * These values are measured by the digital signal processor (DSP). + * They should stay fairly constant even as the signal strength varies, + * if the radio's automatic gain control (AGC) is working right. + * AGC value (see below) will provide the "interesting" info. + */ + val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_RSSI_AB_IDX]); + rssi_a = (val & IWL50_OFDM_RSSI_A_MSK) >> IWL50_OFDM_RSSI_A_BIT_POS; + rssi_b = (val & IWL50_OFDM_RSSI_B_MSK) >> IWL50_OFDM_RSSI_B_BIT_POS; + val = le32_to_cpu(ncphy->non_cfg_phy[IWL50_RX_RES_RSSI_C_IDX]); + rssi_c = (val & IWL50_OFDM_RSSI_C_MSK) >> IWL50_OFDM_RSSI_C_BIT_POS; + + max_rssi = max_t(u32, rssi_a, rssi_b); + max_rssi = max_t(u32, max_rssi, rssi_c); + + IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", + rssi_a, rssi_b, rssi_c, max_rssi, agc); + + /* dBm = max_rssi dB - agc dB - constant. + * Higher AGC (higher radio gain) means lower signal. */ + return max_rssi - agc - IWL_RSSI_OFFSET; +} + static struct iwl_hcmd_ops iwl5000_hcmd = { .rxon_assoc = iwl5000_send_rxon_assoc, }; @@ -1469,6 +1507,7 @@ static struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = { .gain_computation = iwl5000_gain_computation, .chain_noise_reset = iwl5000_chain_noise_reset, .rts_tx_cmd_flag = iwl5000_rts_tx_cmd_flag, + .calc_rssi = iwl5000_calc_rssi, }; static struct iwl_lib_ops iwl5000_lib = { diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 5e57f3ae2ea..28b5b09996e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -1075,10 +1075,12 @@ struct iwl4965_rx_frame { } __attribute__ ((packed)); /* Fixed (non-configurable) rx data from phy */ -#define RX_PHY_FLAGS_ANTENNAE_OFFSET (4) -#define RX_PHY_FLAGS_ANTENNAE_MASK (0x70) -#define IWL_AGC_DB_MASK (0x3f80) /* MASK(7,13) */ -#define IWL_AGC_DB_POS (7) + +#define IWL49_RX_RES_PHY_CNT 14 +#define IWL49_RX_PHY_FLAGS_ANTENNAE_OFFSET (4) +#define IWL49_RX_PHY_FLAGS_ANTENNAE_MASK (0x70) +#define IWL49_AGC_DB_MASK (0x3f80) /* MASK(7,13) */ +#define IWL49_AGC_DB_POS (7) struct iwl4965_rx_non_cfg_phy { __le16 ant_selection; /* ant A bit 4, ant B bit 5, ant C bit 6 */ __le16 agc_info; /* agc code 0:6, agc dB 7:13, reserved 14:15 */ @@ -1086,12 +1088,30 @@ struct iwl4965_rx_non_cfg_phy { u8 pad[0]; } __attribute__ ((packed)); + +#define IWL50_RX_RES_PHY_CNT 8 +#define IWL50_RX_RES_AGC_IDX 1 +#define IWL50_RX_RES_RSSI_AB_IDX 2 +#define IWL50_RX_RES_RSSI_C_IDX 3 +#define IWL50_OFDM_AGC_MSK 0xfe00 +#define IWL50_OFDM_AGC_BIT_POS 9 +#define IWL50_OFDM_RSSI_A_MSK 0x00ff +#define IWL50_OFDM_RSSI_A_BIT_POS 0 +#define IWL50_OFDM_RSSI_B_MSK 0xff0000 +#define IWL50_OFDM_RSSI_B_BIT_POS 16 +#define IWL50_OFDM_RSSI_C_MSK 0x00ff +#define IWL50_OFDM_RSSI_C_BIT_POS 0 + +struct iwl5000_non_cfg_phy { + __le32 non_cfg_phy[IWL50_RX_RES_PHY_CNT]; /* upto 8 phy entries */ +} __attribute__ ((packed)); + + /* * REPLY_RX = 0xc3 (response only, not a command) * Used only for legacy (non 11n) frames. */ -#define RX_RES_PHY_CNT 14 -struct iwl4965_rx_phy_res { +struct iwl_rx_phy_res { u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */ u8 cfg_phy_cnt; /* configurable DSP phy data byte count */ u8 stat_id; /* configurable DSP phy data set ID */ @@ -1100,8 +1120,7 @@ struct iwl4965_rx_phy_res { __le32 beacon_time_stamp; /* beacon at on-air rise */ __le16 phy_flags; /* general phy flags: band, modulation, ... */ __le16 channel; /* channel number */ - __le16 non_cfg_phy[RX_RES_PHY_CNT]; /* upto 14 phy entries */ - __le32 reserved2; + u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */ __le32 rate_n_flags; /* RATE_MCS_* */ __le16 byte_count; /* frame's byte-count */ __le16 reserved3; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index eaefa42f37c..64f139e9744 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -95,6 +95,8 @@ struct iwl_hcmd_utils_ops { void (*chain_noise_reset)(struct iwl_priv *priv); void (*rts_tx_cmd_flag)(struct ieee80211_tx_info *info, __le32 *tx_flags); + int (*calc_rssi)(struct iwl_priv *priv, + struct iwl_rx_phy_res *rx_resp); }; struct iwl_lib_ops { diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c index e2d9afba38a..f3f6ea49fdd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-rx.c @@ -791,7 +791,7 @@ static inline void iwl_dbg_report_frame(struct iwl_priv *priv, static void iwl_add_radiotap(struct iwl_priv *priv, struct sk_buff *skb, - struct iwl4965_rx_phy_res *rx_start, + struct iwl_rx_phy_res *rx_start, struct ieee80211_rx_status *stats, u32 ampdu_status) { @@ -1010,8 +1010,8 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, struct ieee80211_rx_status *stats) { struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; - struct iwl4965_rx_phy_res *rx_start = (include_phy) ? - (struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) : NULL; + struct iwl_rx_phy_res *rx_start = (include_phy) ? + (struct iwl_rx_phy_res *)&(pkt->u.raw[0]) : NULL; struct ieee80211_hdr *hdr; u16 len; __le32 *rx_end; @@ -1020,7 +1020,7 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, u32 ampdu_status_legacy; if (!include_phy && priv->last_phy_res[0]) - rx_start = (struct iwl4965_rx_phy_res *)&priv->last_phy_res[1]; + rx_start = (struct iwl_rx_phy_res *)&priv->last_phy_res[1]; if (!rx_start) { IWL_ERROR("MPDU frame without a PHY data\n"); @@ -1032,8 +1032,8 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, len = le16_to_cpu(rx_start->byte_count); - rx_end = (__le32 *) ((u8 *) &pkt->u.raw[0] + - sizeof(struct iwl4965_rx_phy_res) + + rx_end = (__le32 *)((u8 *) &pkt->u.raw[0] + + sizeof(struct iwl_rx_phy_res) + rx_start->cfg_phy_cnt + len); } else { @@ -1084,40 +1084,13 @@ static void iwl_pass_packet_to_mac80211(struct iwl_priv *priv, } /* Calc max signal level (dBm) among 3 possible receivers */ -static int iwl_calc_rssi(struct iwl_priv *priv, - struct iwl4965_rx_phy_res *rx_resp) +static inline int iwl_calc_rssi(struct iwl_priv *priv, + struct iwl_rx_phy_res *rx_resp) { - /* data from PHY/DSP regarding signal strength, etc., - * contents are always there, not configurable by host. */ - struct iwl4965_rx_non_cfg_phy *ncphy = - (struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy; - u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL_AGC_DB_MASK) - >> IWL_AGC_DB_POS; - - u32 valid_antennae = - (le16_to_cpu(rx_resp->phy_flags) & RX_PHY_FLAGS_ANTENNAE_MASK) - >> RX_PHY_FLAGS_ANTENNAE_OFFSET; - u8 max_rssi = 0; - u32 i; - - /* Find max rssi among 3 possible receivers. - * These values are measured by the digital signal processor (DSP). - * They should stay fairly constant even as the signal strength varies, - * if the radio's automatic gain control (AGC) is working right. - * AGC value (see below) will provide the "interesting" info. */ - for (i = 0; i < 3; i++) - if (valid_antennae & (1 << i)) - max_rssi = max(ncphy->rssi_info[i << 1], max_rssi); - - IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n", - ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4], - max_rssi, agc); - - /* dBm = max_rssi dB - agc dB - constant. - * Higher AGC (higher radio gain) means lower signal. */ - return max_rssi - agc - IWL_RSSI_OFFSET; + return priv->cfg->ops->utils->calc_rssi(priv, rx_resp); } + static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id) { unsigned long flags; @@ -1180,9 +1153,9 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, * this rx packet for legacy frames, * or phy data cached from REPLY_RX_PHY_CMD for HT frames. */ int include_phy = (pkt->hdr.cmd == REPLY_RX); - struct iwl4965_rx_phy_res *rx_start = (include_phy) ? - (struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) : - (struct iwl4965_rx_phy_res *)&priv->last_phy_res[1]; + struct iwl_rx_phy_res *rx_start = (include_phy) ? + (struct iwl_rx_phy_res *)&(pkt->u.raw[0]) : + (struct iwl_rx_phy_res *)&priv->last_phy_res[1]; __le32 *rx_end; unsigned int len = 0; u16 fc; @@ -1210,7 +1183,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, if (!include_phy) { if (priv->last_phy_res[0]) - rx_start = (struct iwl4965_rx_phy_res *) + rx_start = (struct iwl_rx_phy_res *) &priv->last_phy_res[1]; else rx_start = NULL; @@ -1227,7 +1200,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv, len = le16_to_cpu(rx_start->byte_count); rx_end = (__le32 *)(pkt->u.raw + rx_start->cfg_phy_cnt + - sizeof(struct iwl4965_rx_phy_res) + len); + sizeof(struct iwl_rx_phy_res) + len); } else { struct iwl4965_rx_mpdu_res_start *amsdu = (struct iwl4965_rx_mpdu_res_start *)pkt->u.raw; @@ -1316,6 +1289,6 @@ void iwl_rx_reply_rx_phy(struct iwl_priv *priv, struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; priv->last_phy_res[0] = 1; memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]), - sizeof(struct iwl4965_rx_phy_res)); + sizeof(struct iwl_rx_phy_res)); } EXPORT_SYMBOL(iwl_rx_reply_rx_phy); -- GitLab From c1842d6150c4efe1d01e7a8cf86c63aec6223486 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 4 Aug 2008 16:00:43 +0800 Subject: [PATCH 0721/1024] iwlwifi: fix unhandled interrupt when HW rfkill is on This patch fixes unhandled interrupt when HW rfkill is on during devices start up. The behavior changes, now open is successful even when rfkill is on. This is to align with the situation when rfkill is set on after opening. Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 6503b3ac8d6..b8407d5704a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2232,17 +2232,16 @@ static int __iwl4965_up(struct iwl_priv *priv) } /* If platform's RF_KILL switch is NOT set to KILL */ - if (iwl_read32(priv, CSR_GP_CNTRL) & - CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) + if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW) clear_bit(STATUS_RF_KILL_HW, &priv->status); else set_bit(STATUS_RF_KILL_HW, &priv->status); - if (!test_bit(STATUS_IN_SUSPEND, &priv->status) && - iwl_is_rfkill(priv)) { + if (iwl_is_rfkill(priv)) { + iwl4965_enable_interrupts(priv); IWL_WARNING("Radio disabled by %s RF Kill switch\n", test_bit(STATUS_RF_KILL_HW, &priv->status) ? "HW" : "SW"); - return -ENODEV; + return 0; } iwl_write32(priv, CSR_INT, 0xFFFFFFFF); @@ -2278,11 +2277,6 @@ static int __iwl4965_up(struct iwl_priv *priv) memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr, priv->ucode_data.len); - /* We return success when we resume from suspend and rf_kill is on. */ - if (test_bit(STATUS_RF_KILL_HW, &priv->status) || - test_bit(STATUS_RF_KILL_SW, &priv->status)) - return 0; - for (i = 0; i < MAX_HW_RESTARTS; i++) { iwl_clear_stations_table(priv); @@ -2651,6 +2645,9 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw) if (ret) goto out_release_irq; + if (iwl_is_rfkill(priv)) + goto out; + IWL_DEBUG_INFO("Start UP work done.\n"); if (test_bit(STATUS_IN_SUSPEND, &priv->status)) @@ -2670,6 +2667,7 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw) } } +out: priv->is_open = 1; IWL_DEBUG_MAC80211("leave\n"); return 0; -- GitLab From 14652562364dad636ddce2cd11e71702ca21bfbd Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 4 Aug 2008 16:00:46 +0800 Subject: [PATCH 0722/1024] iwlwifi: decrement rx skb counter in scan abort handler This patch decrements rx skb counter in scan abort handler. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-scan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 5a00ac23e2d..9bb6adb28b7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -202,6 +202,7 @@ static int iwl_send_scan_abort(struct iwl_priv *priv) clear_bit(STATUS_SCAN_HW, &priv->status); } + priv->alloc_rxb_skb--; dev_kfree_skb_any(cmd.meta.u.skb); return ret; -- GitLab From 2d3db679511be102741cb2d5f8c2b8a1ededdee7 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 4 Aug 2008 16:00:47 +0800 Subject: [PATCH 0723/1024] iwlwifi: grap nic access before accessing periphery registers We need to grap nic access before accessing periphery registers. Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index c5b104fd149..f3d139b663e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -241,9 +241,11 @@ static void iwl5000_nic_config(struct iwl_priv *priv) * (PCIe power is lost before PERST# is asserted), * causing ME FW to lose ownership and not being able to obtain it back. */ - iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, + iwl_grab_nic_access(priv); + iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS, ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS); + iwl_release_nic_access(priv); spin_unlock_irqrestore(&priv->lock, flags); } -- GitLab From 3e2236c108792c3afbbfbe3f373ee7fdd68eda8e Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Mon, 4 Aug 2008 16:00:48 +0800 Subject: [PATCH 0724/1024] iwl3945: fix merge mistake for packet injection We should allow packets transmission in monitor mode for 3945. The patch fixes a merge error with 2.6.26 kernel. Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index eb41b02b506..444847ab1b5 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6589,12 +6589,6 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) IWL_DEBUG_MAC80211("enter\n"); - if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { - IWL_DEBUG_MAC80211("leave - monitor\n"); - dev_kfree_skb_any(skb); - return 0; - } - IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); -- GitLab From 22127f246dc37ed5bea0915f7860002ba6d87da7 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 4 Aug 2008 22:18:07 +0200 Subject: [PATCH 0725/1024] kconfig: always write out .config Always write out .config also in the case where config did not change. This fixes: http://bugzilla.kernel.org/show_bug.cgi?id=11230 Signed-off-by: Sam Ravnborg Cc: Josh Boyer Cc: Adrian Bunk --- scripts/kconfig/conf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index 9fba838c706..36b5eedcdc7 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -596,7 +596,7 @@ int main(int ac, char **av) break; } - if (conf_get_changed() && conf_write(NULL)) { + if (conf_write(NULL)) { fprintf(stderr, _("\n*** Error during writing of the kernel configuration.\n\n")); exit(1); } -- GitLab From f072181e6403b0fe2e2aa800a005497b748fd284 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Mon, 4 Aug 2008 22:29:37 +0200 Subject: [PATCH 0726/1024] kconfig: drop the ""trying to assign nonexistent symbol" warning They really stand out now that make *config is less chatty - and they are generally ignored - so drop them. Signed-off-by: Sam Ravnborg Cc: Roman Zippel Cc: Adrian Bunk --- scripts/kconfig/confdata.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 07597611cc5..df6a188b993 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -222,10 +222,8 @@ load: continue; if (def == S_DEF_USER) { sym = sym_find(line + 9); - if (!sym) { - conf_warning("trying to assign nonexistent symbol %s", line + 9); + if (!sym) break; - } } else { sym = sym_lookup(line + 9, 0); if (sym->type == S_UNKNOWN) @@ -261,10 +259,8 @@ load: } if (def == S_DEF_USER) { sym = sym_find(line + 7); - if (!sym) { - conf_warning("trying to assign nonexistent symbol %s", line + 7); + if (!sym) break; - } } else { sym = sym_lookup(line + 7, 0); if (sym->type == S_UNKNOWN) -- GitLab From ee694d6b4106ca09dcf23f839b44efd152a1da82 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 4 Aug 2008 13:39:28 -0700 Subject: [PATCH 0727/1024] [IA64] Fix uniprocessor build w.r.t. SGI_XP and SGI_GRU The SGI XP and GRU drivers only work on SMP systems ... the Kconfig file only disallowed them for non-SMP X86. Signed-off-by: Tony Luck --- drivers/misc/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 82af385460e..a726f3b01a6 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -427,10 +427,10 @@ config ENCLOSURE_SERVICES config SGI_XP tristate "Support communication between SGI SSIs" depends on NET - depends on IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || (X86_64 && SMP) + depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_64) && SMP select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 - select SGI_GRU if IA64_GENERIC || IA64_SGI_UV || (X86_64 && SMP) + select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP ---help--- An SGI machine can be divided into multiple Single System Images which act independently of each other and have -- GitLab From a3cf5e6b6f2548b036921da5ab6325dc8a76e207 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 3 Aug 2008 00:01:05 -0700 Subject: [PATCH 0728/1024] sparc64: Need to disable preemption around smp_tsb_sync(). Based upon a bug report by Mariusz Kozlowski It uses smp_call_function_masked() now, which has a preemption-disabled requirement. Signed-off-by: David S. Miller --- arch/sparc64/mm/tsb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c index 3547937b17a..587f8efb2e0 100644 --- a/arch/sparc64/mm/tsb.c +++ b/arch/sparc64/mm/tsb.c @@ -1,9 +1,10 @@ /* arch/sparc64/mm/tsb.c * - * Copyright (C) 2006 David S. Miller + * Copyright (C) 2006, 2008 David S. Miller */ #include +#include #include #include #include @@ -415,7 +416,9 @@ retry_tsb_alloc: tsb_context_switch(mm); /* Now force other processors to do the same. */ + preempt_disable(); smp_tsb_sync(mm); + preempt_enable(); /* Now it is safe to free the old tsb. */ kmem_cache_free(tsb_caches[old_cache_index], old_tsb); -- GitLab From abd9e6982815ad7bd2c70dbf4cc0c08b48229d6e Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 3 Aug 2008 00:04:13 -0700 Subject: [PATCH 0729/1024] arch/sparc64/kernel/signal.c: removed duplicated #include Removed duplicated #include in arch/sparc64/kernel/signal.c. Signed-off-by: Huang Weiyi Signed-off-by: David S. Miller --- arch/sparc64/kernel/signal.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c index ca5a6ae3a6e..ec82d76dc6f 100644 --- a/arch/sparc64/kernel/signal.c +++ b/arch/sparc64/kernel/signal.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include -- GitLab From 5e0797e5b84408a13260a107e2f7a49ee6342ae4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 3 Aug 2008 22:52:41 -0700 Subject: [PATCH 0730/1024] sparc64: Use function pointer for cross-call sending. Initialize it using the smp_setup_processor_id() hook. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 340842e51ce..3c6970ad774 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -756,6 +756,8 @@ dump_cpu_list_and_out: printk("]\n"); } +static void (*xcall_deliver)(u64, u64, u64, cpumask_t); + /* Send cross call to all processors mentioned in MASK * except self. */ @@ -767,12 +769,7 @@ static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 d cpus_and(mask, mask, cpu_online_map); cpu_clear(this_cpu, mask); - if (tlb_type == spitfire) - spitfire_xcall_deliver(data0, data1, data2, mask); - else if (tlb_type == cheetah || tlb_type == cheetah_plus) - cheetah_xcall_deliver(data0, data1, data2, mask); - else - hypervisor_xcall_deliver(data0, data1, data2, mask); + xcall_deliver(data0, data1, data2, mask); /* NOTE: Caller runs local copy on master. */ put_cpu(); @@ -1202,6 +1199,16 @@ void __devinit smp_prepare_boot_cpu(void) { } +void __init smp_setup_processor_id(void) +{ + if (tlb_type == spitfire) + xcall_deliver = spitfire_xcall_deliver; + else if (tlb_type == cheetah || tlb_type == cheetah_plus) + xcall_deliver = cheetah_xcall_deliver; + else + xcall_deliver = hypervisor_xcall_deliver; +} + void __devinit smp_fill_in_sib_core_maps(void) { unsigned int i; -- GitLab From 622824dbb536f7bdc241eefc3e1ae31c463b4eb8 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 3 Aug 2008 23:07:18 -0700 Subject: [PATCH 0731/1024] sparc64: Use xcall_deliver() consistently. There remained some spots still vectoring to the appropriate *_xcall_deliver() function manually. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 40 +++++++++++++++++---------------------- 1 file changed, 17 insertions(+), 23 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 3c6970ad774..063668feab1 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -890,29 +890,24 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu) __local_flush_dcache_page(page); } else if (cpu_online(cpu)) { void *pg_addr = page_address(page); - u64 data0; + u64 data0 = 0; if (tlb_type == spitfire) { - data0 = - ((u64)&xcall_flush_dcache_page_spitfire); + data0 = ((u64)&xcall_flush_dcache_page_spitfire); if (page_mapping(page) != NULL) data0 |= ((u64)1 << 32); - spitfire_xcall_deliver(data0, - __pa(pg_addr), - (u64) pg_addr, - mask); } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { #ifdef DCACHE_ALIASING_POSSIBLE - data0 = - ((u64)&xcall_flush_dcache_page_cheetah); - cheetah_xcall_deliver(data0, - __pa(pg_addr), - 0, mask); + data0 = ((u64)&xcall_flush_dcache_page_cheetah); #endif } + if (data0) { + xcall_deliver(data0, __pa(pg_addr), + (u64) pg_addr, mask); #ifdef CONFIG_DEBUG_DCFLUSH - atomic_inc(&dcpage_flushes_xcall); + atomic_inc(&dcpage_flushes_xcall); #endif + } } put_cpu(); @@ -920,10 +915,10 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu) void flush_dcache_page_all(struct mm_struct *mm, struct page *page) { - void *pg_addr = page_address(page); cpumask_t mask = cpu_online_map; - u64 data0; + void *pg_addr; int this_cpu; + u64 data0; if (tlb_type == hypervisor) return; @@ -937,25 +932,24 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page) #endif if (cpus_empty(mask)) goto flush_self; + data0 = 0; + pg_addr = page_address(page); if (tlb_type == spitfire) { data0 = ((u64)&xcall_flush_dcache_page_spitfire); if (page_mapping(page) != NULL) data0 |= ((u64)1 << 32); - spitfire_xcall_deliver(data0, - __pa(pg_addr), - (u64) pg_addr, - mask); } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { #ifdef DCACHE_ALIASING_POSSIBLE data0 = ((u64)&xcall_flush_dcache_page_cheetah); - cheetah_xcall_deliver(data0, - __pa(pg_addr), - 0, mask); #endif } + if (data0) { + xcall_deliver(data0, __pa(pg_addr), + (u64) pg_addr, mask); #ifdef CONFIG_DEBUG_DCFLUSH - atomic_inc(&dcpage_flushes_xcall); + atomic_inc(&dcpage_flushes_xcall); #endif + } flush_self: __local_flush_dcache_page(page); -- GitLab From cd5bc89debb4045d55eeffe325b97f2dfba4ddea Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 3 Aug 2008 23:24:26 -0700 Subject: [PATCH 0732/1024] sparc64: Use cpumask_t pointers and for_each_cpu_mask_nr() in xcall_deliver. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 063668feab1..868625e3b66 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -459,13 +459,13 @@ again: } } -static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) +static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) { u64 pstate; int i; __asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate)); - for_each_cpu_mask(i, mask) + for_each_cpu_mask_nr(i, *mask) spitfire_xcall_helper(data0, data1, data2, pstate, i); } @@ -473,14 +473,17 @@ static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, cpuma * packet, but we have no use for that. However we do take advantage of * the new pipelining feature (ie. dispatch to multiple cpus simultaneously). */ -static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) +static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask_p) { u64 pstate, ver, busy_mask; int nack_busy_id, is_jbus, need_more; + cpumask_t mask; - if (cpus_empty(mask)) + if (cpus_empty(*mask_p)) return; + mask = *mask_p; + /* Unfortunately, someone at Sun had the brilliant idea to make the * busy/nack fields hard-coded by ITID number for this Ultra-III * derivative processor. @@ -511,7 +514,7 @@ retry: { int i; - for_each_cpu_mask(i, mask) { + for_each_cpu_mask_nr(i, mask) { u64 target = (i << 14) | 0x70; if (is_jbus) { @@ -550,7 +553,7 @@ retry: : : "r" (pstate)); if (unlikely(need_more)) { int i, cnt = 0; - for_each_cpu_mask(i, mask) { + for_each_cpu_mask_nr(i, mask) { cpu_clear(i, mask); cnt++; if (cnt == 32) @@ -584,7 +587,7 @@ retry: /* Clear out the mask bits for cpus which did not * NACK us. */ - for_each_cpu_mask(i, mask) { + for_each_cpu_mask_nr(i, mask) { u64 check_mask; if (is_jbus) @@ -605,16 +608,16 @@ retry: } /* Multi-cpu list version. */ -static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) +static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) { + int cnt, retries, this_cpu, prev_sent, i; + unsigned long flags, status; + cpumask_t error_mask; struct trap_per_cpu *tb; u16 *cpu_list; u64 *mondo; - cpumask_t error_mask; - unsigned long flags, status; - int cnt, retries, this_cpu, prev_sent, i; - if (cpus_empty(mask)) + if (cpus_empty(*mask)) return; /* We have to do this whole thing with interrupts fully disabled. @@ -642,7 +645,7 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t /* Setup the initial cpu list. */ cnt = 0; - for_each_cpu_mask(i, mask) + for_each_cpu_mask_nr(i, *mask) cpu_list[cnt++] = i; cpus_clear(error_mask); @@ -729,7 +732,7 @@ fatal_mondo_cpu_error: "were in error state\n", this_cpu); printk(KERN_CRIT "CPU[%d]: Error mask [ ", this_cpu); - for_each_cpu_mask(i, error_mask) + for_each_cpu_mask_nr(i, error_mask) printk("%d ", i); printk("]\n"); return; @@ -756,7 +759,7 @@ dump_cpu_list_and_out: printk("]\n"); } -static void (*xcall_deliver)(u64, u64, u64, cpumask_t); +static void (*xcall_deliver)(u64, u64, u64, const cpumask_t *); /* Send cross call to all processors mentioned in MASK * except self. @@ -769,7 +772,7 @@ static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 d cpus_and(mask, mask, cpu_online_map); cpu_clear(this_cpu, mask); - xcall_deliver(data0, data1, data2, mask); + xcall_deliver(data0, data1, data2, &mask); /* NOTE: Caller runs local copy on master. */ put_cpu(); @@ -903,7 +906,7 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu) } if (data0) { xcall_deliver(data0, __pa(pg_addr), - (u64) pg_addr, mask); + (u64) pg_addr, &mask); #ifdef CONFIG_DEBUG_DCFLUSH atomic_inc(&dcpage_flushes_xcall); #endif @@ -945,7 +948,7 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page) } if (data0) { xcall_deliver(data0, __pa(pg_addr), - (u64) pg_addr, mask); + (u64) pg_addr, &mask); #ifdef CONFIG_DEBUG_DCFLUSH atomic_inc(&dcpage_flushes_xcall); #endif -- GitLab From 199266305311d060b6e057fa5c7de01f218bb911 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 3 Aug 2008 23:56:28 -0700 Subject: [PATCH 0733/1024] sparc64: Call xcall_deliver() directly in some cases. For these cases the callers make sure: 1) The cpus indicated are online. 2) The current cpu is not in the list of indicated cpus. Therefore we can pass a pointer to the mask directly. One of the motivations in this transformation is to make use of "&cpumask_of_cpu(cpu)" which evaluates to a pointer to constant data in the kernel and thus takes up no stack space. Hopefully someone in the future will change the interface of arch_send_call_function_ipi() such that it passes a const cpumask_t pointer so that this will optimize ever further. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 33 ++++++++++----------------------- 1 file changed, 10 insertions(+), 23 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 868625e3b66..47b0738ea4b 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -792,16 +792,15 @@ extern unsigned long xcall_call_function; void arch_send_call_function_ipi(cpumask_t mask) { - smp_cross_call_masked(&xcall_call_function, 0, 0, 0, mask); + xcall_deliver((u64) &xcall_call_function, 0, 0, &mask); } extern unsigned long xcall_call_function_single; void arch_send_call_function_single_ipi(int cpu) { - cpumask_t mask = cpumask_of_cpu(cpu); - - smp_cross_call_masked(&xcall_call_function_single, 0, 0, 0, mask); + xcall_deliver((u64) &xcall_call_function_single, 0, 0, + &cpumask_of_cpu(cpu)); } /* Send cross call to all processors except self. */ @@ -959,24 +958,6 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page) put_cpu(); } -static void __smp_receive_signal_mask(cpumask_t mask) -{ - smp_cross_call_masked(&xcall_receive_signal, 0, 0, 0, mask); -} - -void smp_receive_signal(int cpu) -{ - cpumask_t mask = cpumask_of_cpu(cpu); - - if (cpu_online(cpu)) - __smp_receive_signal_mask(mask); -} - -void smp_receive_signal_client(int irq, struct pt_regs *regs) -{ - clear_softint(1 << irq); -} - void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs) { struct mm_struct *mm; @@ -1374,7 +1355,13 @@ void __init smp_cpus_done(unsigned int max_cpus) void smp_send_reschedule(int cpu) { - smp_receive_signal(cpu); + xcall_deliver((u64) &xcall_receive_signal, 0, 0, + &cpumask_of_cpu(cpu)); +} + +void smp_receive_signal_client(int irq, struct pt_regs *regs) +{ + clear_softint(1 << irq); } /* This is a nop because we capture all other cpus -- GitLab From 24445a4ac9d3fdd3f96f0ad277cb2ba274470d94 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 00:02:31 -0700 Subject: [PATCH 0734/1024] sparc64: Directly call xcall_deliver() in smp_start_sync_tick_client. We know the cpu is online and not the current cpu here. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 47b0738ea4b..8c9e75dc1e6 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -782,10 +782,8 @@ extern unsigned long xcall_sync_tick; static void smp_start_sync_tick_client(int cpu) { - cpumask_t mask = cpumask_of_cpu(cpu); - - smp_cross_call_masked(&xcall_sync_tick, - 0, 0, 0, mask); + xcall_deliver((u64) &xcall_sync_tick, 0, 0, + &cpumask_of_cpu(cpu)); } extern unsigned long xcall_call_function; -- GitLab From 91a4231cc2efb9134373bb2a93be96a284955607 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 00:51:18 -0700 Subject: [PATCH 0735/1024] sparc64: Make smp_cross_call_masked() take a cpumask_t pointer. Ideally this could be simplified further such that we could pass the pointer down directly into the xcall_deliver() implementation. But if we do that we need to do the "cpu_online(cpu)" and "cpu != self" checks down in those functions. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 8c9e75dc1e6..740259d8955 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -761,15 +761,19 @@ dump_cpu_list_and_out: static void (*xcall_deliver)(u64, u64, u64, const cpumask_t *); -/* Send cross call to all processors mentioned in MASK - * except self. +/* Send cross call to all processors mentioned in MASK_P + * except self. Really, there are only two cases currently, + * "&cpu_online_map" and "&mm->cpu_vm_mask". */ -static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, cpumask_t mask) +static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, const cpumask_t *mask_p) { u64 data0 = (((u64)ctx)<<32 | (((u64)func) & 0xffffffff)); int this_cpu = get_cpu(); + cpumask_t mask; - cpus_and(mask, mask, cpu_online_map); + mask = *mask_p; + if (mask_p != &cpu_online_map) + cpus_and(mask, mask, cpu_online_map); cpu_clear(this_cpu, mask); xcall_deliver(data0, data1, data2, &mask); @@ -803,7 +807,7 @@ void arch_send_call_function_single_ipi(int cpu) /* Send cross call to all processors except self. */ #define smp_cross_call(func, ctx, data1, data2) \ - smp_cross_call_masked(func, ctx, data1, data2, cpu_online_map) + smp_cross_call_masked(func, ctx, data1, data2, &cpu_online_map) void smp_call_function_client(int irq, struct pt_regs *regs) { @@ -1056,7 +1060,7 @@ void smp_flush_tlb_mm(struct mm_struct *mm) smp_cross_call_masked(&xcall_flush_tlb_mm, ctx, 0, 0, - mm->cpu_vm_mask); + &mm->cpu_vm_mask); local_flush_and_out: __flush_tlb_mm(ctx, SECONDARY_CONTEXT); @@ -1074,7 +1078,7 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long else smp_cross_call_masked(&xcall_flush_tlb_pending, ctx, nr, (unsigned long) vaddrs, - mm->cpu_vm_mask); + &mm->cpu_vm_mask); __flush_tlb_pending(ctx, nr, vaddrs); -- GitLab From bcbd2b65868213c1426654304de3da330cde6b3a Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 4 Aug 2008 15:47:25 -0700 Subject: [PATCH 0736/1024] [IA64] Update generic config Changes to support a new platform in my lab. Signed-off-by: Tony Luck --- arch/ia64/configs/generic_defconfig | 71 +++++++++++++++++++++++++++-- 1 file changed, 67 insertions(+), 4 deletions(-) diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 133089be5f2..9f483976228 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.27-rc1 -# Sat Aug 2 13:24:08 2008 +# Mon Aug 4 15:38:01 2008 # CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -245,7 +245,8 @@ CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m -# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_DOCK=y +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m @@ -548,6 +549,7 @@ CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y +# CONFIG_SCSI_IPR is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set @@ -557,7 +559,67 @@ CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set -# CONFIG_ATA is not set +CONFIG_ATA=y +CONFIG_ATA_NONSTANDARD=y +CONFIG_ATA_ACPI=y +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +CONFIG_ATA_PIIX=y +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ACPI is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -668,7 +730,8 @@ CONFIG_E1000=y # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set -# CONFIG_IGB is not set +CONFIG_IGB=y +# CONFIG_IGB_LRO is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set -- GitLab From 43f589235e223418d5807ebcddca73ec8a45f52c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 16:13:51 -0700 Subject: [PATCH 0737/1024] sparc64: Always allocate the send mondo blocks, even on non-sun4v. The idea is that we'll use this cpu list array and mondo block even for non-hypervisor platforms. Signed-off-by: David S. Miller --- arch/sparc64/kernel/irq.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index c481673d249..ba43d85e8dd 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -915,12 +915,18 @@ static void __init sun4v_init_mondo_queues(void) alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask); alloc_one_kbuf(&tb->nonresum_kernel_buf_pa, tb->nonresum_qmask); + } +} + +static void __init init_send_mondo_info(void) +{ + int cpu; + + for_each_possible_cpu(cpu) { + struct trap_per_cpu *tb = &trap_block[cpu]; init_cpu_send_mondo_info(tb); } - - /* Load up the boot cpu's entries. */ - sun4v_register_mondo_queues(hard_smp_processor_id()); } static struct irqaction timer_irq_action = { @@ -949,6 +955,13 @@ void __init init_IRQ(void) if (tlb_type == hypervisor) sun4v_init_mondo_queues(); + init_send_mondo_info(); + + if (tlb_type == hypervisor) { + /* Load up the boot cpu's entries. */ + sun4v_register_mondo_queues(hard_smp_processor_id()); + } + /* We need to clear any IRQ's pending in the soft interrupt * registers, a spurious one could be left around from the * PROM timer which we just disabled. -- GitLab From deb16999e452b74011dac5b2fe0d6258df81a2a1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 16:16:20 -0700 Subject: [PATCH 0738/1024] sparc64: Make all xcall_deliver's go through common helper function. This just facilitates the next changeset where we'll be building the cpu list and mondo block in this helper function. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 740259d8955..20f4e291c74 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -759,7 +759,12 @@ dump_cpu_list_and_out: printk("]\n"); } -static void (*xcall_deliver)(u64, u64, u64, const cpumask_t *); +static void (*xcall_deliver_impl)(u64, u64, u64, const cpumask_t *); + +static void xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) +{ + xcall_deliver_impl(data0, data1, data2, mask); +} /* Send cross call to all processors mentioned in MASK_P * except self. Really, there are only two cases currently, @@ -1182,11 +1187,11 @@ void __devinit smp_prepare_boot_cpu(void) void __init smp_setup_processor_id(void) { if (tlb_type == spitfire) - xcall_deliver = spitfire_xcall_deliver; + xcall_deliver_impl = spitfire_xcall_deliver; else if (tlb_type == cheetah || tlb_type == cheetah_plus) - xcall_deliver = cheetah_xcall_deliver; + xcall_deliver_impl = cheetah_xcall_deliver; else - xcall_deliver = hypervisor_xcall_deliver; + xcall_deliver_impl = hypervisor_xcall_deliver; } void __devinit smp_fill_in_sib_core_maps(void) -- GitLab From c02a5119e862dea9a1361182840d41ae1fe24227 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 16:18:40 -0700 Subject: [PATCH 0739/1024] sparc64: Disable local interrupts around xcall_deliver_impl() invocation. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 20f4e291c74..6d458b35643 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -611,7 +611,7 @@ retry: static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) { int cnt, retries, this_cpu, prev_sent, i; - unsigned long flags, status; + unsigned long status; cpumask_t error_mask; struct trap_per_cpu *tb; u16 *cpu_list; @@ -620,18 +620,6 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpum if (cpus_empty(*mask)) return; - /* We have to do this whole thing with interrupts fully disabled. - * Otherwise if we send an xcall from interrupt context it will - * corrupt both our mondo block and cpu list state. - * - * One consequence of this is that we cannot use timeout mechanisms - * that depend upon interrupts being delivered locally. So, for - * example, we cannot sample jiffies and expect it to advance. - * - * Fortunately, udelay() uses %stick/%tick so we can use that. - */ - local_irq_save(flags); - this_cpu = smp_processor_id(); tb = &trap_block[this_cpu]; @@ -720,8 +708,6 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpum } } while (1); - local_irq_restore(flags); - if (unlikely(!cpus_empty(error_mask))) goto fatal_mondo_cpu_error; @@ -738,14 +724,12 @@ fatal_mondo_cpu_error: return; fatal_mondo_timeout: - local_irq_restore(flags); printk(KERN_CRIT "CPU[%d]: SUN4V mondo timeout, no forward " " progress after %d retries.\n", this_cpu, retries); goto dump_cpu_list_and_out; fatal_mondo_error: - local_irq_restore(flags); printk(KERN_CRIT "CPU[%d]: Unexpected SUN4V mondo error %lu\n", this_cpu, status); printk(KERN_CRIT "CPU[%d]: Args were cnt(%d) cpulist_pa(%lx) " @@ -763,7 +747,21 @@ static void (*xcall_deliver_impl)(u64, u64, u64, const cpumask_t *); static void xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) { + unsigned long flags; + + /* We have to do this whole thing with interrupts fully disabled. + * Otherwise if we send an xcall from interrupt context it will + * corrupt both our mondo block and cpu list state. + * + * One consequence of this is that we cannot use timeout mechanisms + * that depend upon interrupts being delivered locally. So, for + * example, we cannot sample jiffies and expect it to advance. + * + * Fortunately, udelay() uses %stick/%tick so we can use that. + */ + local_irq_save(flags); xcall_deliver_impl(data0, data1, data2, mask); + local_irq_restore(flags); } /* Send cross call to all processors mentioned in MASK_P -- GitLab From fca082c9f1e11ec07efa8d2f9f13688521253f36 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 4 Aug 2008 16:36:20 -0700 Subject: [PATCH 0740/1024] Revert "[SCSI] extend the last_sector_bug flag to cover more sectors" This reverts commit 2b142900784c6e38c8d39fa57d5f95ef08e735d8, since it seems to break some other USB storage devices (at least a JMicron USB to ATA bridge). As such, while it apparently fixes some cardreaders, it would need to be made conditional on the exact reader it fixes in order to avoid causing regressions. Cc: Alan Jenkins Cc: James Bottomley Signed-off-by: Linus Torvalds --- drivers/scsi/sd.c | 21 ++++++--------------- drivers/scsi/sd.h | 6 ------ include/scsi/scsi_device.h | 3 +-- 3 files changed, 7 insertions(+), 23 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index e5e7d785645..8e08d51a0f0 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -375,7 +375,6 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) struct gendisk *disk = rq->rq_disk; struct scsi_disk *sdkp; sector_t block = rq->sector; - sector_t threshold; unsigned int this_count = rq->nr_sectors; unsigned int timeout = sdp->timeout; int ret; @@ -423,21 +422,13 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) } /* - * Some SD card readers can't handle multi-sector accesses which touch - * the last one or two hardware sectors. Split accesses as needed. + * Some devices (some sdcards for one) don't like it if the + * last sector gets read in a larger then 1 sector read. */ - threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS * - (sdp->sector_size / 512); - - if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) { - if (block < threshold) { - /* Access up to the threshold but not beyond */ - this_count = threshold - block; - } else { - /* Access only a single hardware sector */ - this_count = sdp->sector_size / 512; - } - } + if (unlikely(sdp->last_sector_bug && + rq->nr_sectors > sdp->sector_size / 512 && + block + this_count == get_capacity(disk))) + this_count -= sdp->sector_size / 512; SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n", (unsigned long long)block)); diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 95b9f06534d..550b2f70a1f 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -31,12 +31,6 @@ */ #define SD_BUF_SIZE 512 -/* - * Number of sectors at the end of the device to avoid multi-sector - * accesses to in the case of last_sector_bug - */ -#define SD_LAST_BUGGY_SECTORS 8 - struct scsi_disk { struct scsi_driver *driver; /* always &sd_template */ struct scsi_device *device; diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 291d56a1916..9cecc409f0f 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -140,8 +140,7 @@ struct scsi_device { unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */ unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */ unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */ - unsigned last_sector_bug:1; /* do not use multisector accesses on - SD_LAST_BUGGY_SECTORS */ + unsigned last_sector_bug:1; /* Always read last sector in a 1 sector read */ DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */ struct list_head event_list; /* asserted events */ -- GitLab From 90f7ae8a55190f5edfb9fda957e25c994ed39ec4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 16:42:58 -0700 Subject: [PATCH 0741/1024] sparc64: Build cpu list and mondo block at top-level xcall_deliver(). Then modify all of the xcall dispatch implementations get passed and use this information. Now all of the xcall dispatch implementations do not need to be mindful of details such as "is current cpu in the list?" and "is cpu online?" Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 113 +++++++++++++++++++++++--------------- 1 file changed, 69 insertions(+), 44 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 6d458b35643..2387a9b81be 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -459,30 +459,35 @@ again: } } -static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) +static void spitfire_xcall_deliver(struct trap_per_cpu *tb, int cnt) { + u64 *mondo, data0, data1, data2; + u16 *cpu_list; u64 pstate; int i; __asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate)); - for_each_cpu_mask_nr(i, *mask) - spitfire_xcall_helper(data0, data1, data2, pstate, i); + cpu_list = __va(tb->cpu_list_pa); + mondo = __va(tb->cpu_mondo_block_pa); + data0 = mondo[0]; + data1 = mondo[1]; + data2 = mondo[2]; + for (i = 0; i < cnt; i++) + spitfire_xcall_helper(data0, data1, data2, pstate, cpu_list[i]); } /* Cheetah now allows to send the whole 64-bytes of data in the interrupt * packet, but we have no use for that. However we do take advantage of * the new pipelining feature (ie. dispatch to multiple cpus simultaneously). */ -static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask_p) +static void cheetah_xcall_deliver(struct trap_per_cpu *tb, int cnt) { - u64 pstate, ver, busy_mask; int nack_busy_id, is_jbus, need_more; - cpumask_t mask; - - if (cpus_empty(*mask_p)) - return; + u64 *mondo, pstate, ver, busy_mask; + u16 *cpu_list; - mask = *mask_p; + cpu_list = __va(tb->cpu_list_pa); + mondo = __va(tb->cpu_mondo_block_pa); /* Unfortunately, someone at Sun had the brilliant idea to make the * busy/nack fields hard-coded by ITID number for this Ultra-III @@ -505,7 +510,7 @@ retry: "stxa %2, [%5] %6\n\t" "membar #Sync\n\t" : /* no outputs */ - : "r" (data0), "r" (data1), "r" (data2), + : "r" (mondo[0]), "r" (mondo[1]), "r" (mondo[2]), "r" (0x40), "r" (0x50), "r" (0x60), "i" (ASI_INTR_W)); @@ -514,11 +519,16 @@ retry: { int i; - for_each_cpu_mask_nr(i, mask) { - u64 target = (i << 14) | 0x70; + for (i = 0; i < cnt; i++) { + u64 target, nr; + + nr = cpu_list[i]; + if (nr == 0xffff) + continue; + target = (nr << 14) | 0x70; if (is_jbus) { - busy_mask |= (0x1UL << (i * 2)); + busy_mask |= (0x1UL << (nr * 2)); } else { target |= (nack_busy_id << 24); busy_mask |= (0x1UL << @@ -552,11 +562,13 @@ retry: __asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate)); if (unlikely(need_more)) { - int i, cnt = 0; - for_each_cpu_mask_nr(i, mask) { - cpu_clear(i, mask); - cnt++; - if (cnt == 32) + int i, this_cnt = 0; + for (i = 0; i < cnt; i++) { + if (cpu_list[i] == 0xffff) + continue; + cpu_list[i] = 0xffff; + this_cnt++; + if (this_cnt == 32) break; } goto retry; @@ -587,16 +599,20 @@ retry: /* Clear out the mask bits for cpus which did not * NACK us. */ - for_each_cpu_mask_nr(i, mask) { - u64 check_mask; + for (i = 0; i < cnt; i++) { + u64 check_mask, nr; + + nr = cpu_list[i]; + if (nr == 0xffff) + continue; if (is_jbus) - check_mask = (0x2UL << (2*i)); + check_mask = (0x2UL << (2*nr)); else check_mask = (0x2UL << this_busy_nack); if ((dispatch_stat & check_mask) == 0) - cpu_clear(i, mask); + cpu_list[i] = 0xffff; this_busy_nack += 2; if (this_busy_nack == 64) break; @@ -608,34 +624,17 @@ retry: } /* Multi-cpu list version. */ -static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) +static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt) { - int cnt, retries, this_cpu, prev_sent, i; + int retries, this_cpu, prev_sent, i; unsigned long status; cpumask_t error_mask; - struct trap_per_cpu *tb; u16 *cpu_list; - u64 *mondo; - - if (cpus_empty(*mask)) - return; this_cpu = smp_processor_id(); - tb = &trap_block[this_cpu]; - - mondo = __va(tb->cpu_mondo_block_pa); - mondo[0] = data0; - mondo[1] = data1; - mondo[2] = data2; - wmb(); cpu_list = __va(tb->cpu_list_pa); - /* Setup the initial cpu list. */ - cnt = 0; - for_each_cpu_mask_nr(i, *mask) - cpu_list[cnt++] = i; - cpus_clear(error_mask); retries = 0; prev_sent = 0; @@ -743,11 +742,15 @@ dump_cpu_list_and_out: printk("]\n"); } -static void (*xcall_deliver_impl)(u64, u64, u64, const cpumask_t *); +static void (*xcall_deliver_impl)(struct trap_per_cpu *, int); static void xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask) { + struct trap_per_cpu *tb; + int this_cpu, i, cnt; unsigned long flags; + u16 *cpu_list; + u64 *mondo; /* We have to do this whole thing with interrupts fully disabled. * Otherwise if we send an xcall from interrupt context it will @@ -760,7 +763,29 @@ static void xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask * Fortunately, udelay() uses %stick/%tick so we can use that. */ local_irq_save(flags); - xcall_deliver_impl(data0, data1, data2, mask); + + this_cpu = smp_processor_id(); + tb = &trap_block[this_cpu]; + + mondo = __va(tb->cpu_mondo_block_pa); + mondo[0] = data0; + mondo[1] = data1; + mondo[2] = data2; + wmb(); + + cpu_list = __va(tb->cpu_list_pa); + + /* Setup the initial cpu list. */ + cnt = 0; + for_each_cpu_mask_nr(i, *mask) { + if (i == this_cpu || !cpu_online(i)) + continue; + cpu_list[cnt++] = i; + } + + if (cnt) + xcall_deliver_impl(tb, cnt); + local_irq_restore(flags); } -- GitLab From ed4d9c66eb941a416c8cb9a0138c69d46d82fc4f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 16:47:57 -0700 Subject: [PATCH 0742/1024] sparc64: Kill error_mask from hypervisor_xcall_deliver(). It can eat up a lot of stack space when NR_CPUS is large. We retain some of it's functionality by reporting at least one of the cpu's which are seen in error state. Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 2387a9b81be..ac8996ec97b 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -626,16 +626,15 @@ retry: /* Multi-cpu list version. */ static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt) { - int retries, this_cpu, prev_sent, i; + int retries, this_cpu, prev_sent, i, saw_cpu_error; unsigned long status; - cpumask_t error_mask; u16 *cpu_list; this_cpu = smp_processor_id(); cpu_list = __va(tb->cpu_list_pa); - cpus_clear(error_mask); + saw_cpu_error = 0; retries = 0; prev_sent = 0; do { @@ -680,10 +679,9 @@ static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt) continue; err = sun4v_cpu_state(cpu); - if (err >= 0 && - err == HV_CPU_STATE_ERROR) { + if (err == HV_CPU_STATE_ERROR) { + saw_cpu_error = (cpu + 1); cpu_list[i] = 0xffff; - cpu_set(cpu, error_mask); } } } else if (unlikely(status != HV_EWOULDBLOCK)) @@ -707,19 +705,15 @@ static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt) } } while (1); - if (unlikely(!cpus_empty(error_mask))) + if (unlikely(saw_cpu_error)) goto fatal_mondo_cpu_error; return; fatal_mondo_cpu_error: printk(KERN_CRIT "CPU[%d]: SUN4V mondo cpu error, some target cpus " - "were in error state\n", - this_cpu); - printk(KERN_CRIT "CPU[%d]: Error mask [ ", this_cpu); - for_each_cpu_mask_nr(i, error_mask) - printk("%d ", i); - printk("]\n"); + "(including %d) were in error state\n", + this_cpu, saw_cpu_error - 1); return; fatal_mondo_timeout: -- GitLab From 1a3f7d98e5f50f21ce6fb1406a35531d9596c5c6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 4 Aug 2008 16:50:38 -0700 Subject: [PATCH 0743/1024] Revert "UFS: add const to parser token table" This reverts commit f9247273cb69ba101877e946d2d83044409cc8c5 (and fb2e405fc1fc8b20d9c78eaa1c7fd5a297efde43 - "fix fs/nfs/nfsroot.c compilation" - that fixed a missed conversion). The changes cause problems for at least the sparc build. Let's re-do them when the exact issues are resolved. Requested-by: Andrew Morton Requested-by: Steven Whitehouse Cc: David Miller Signed-off-by: Linus Torvalds --- fs/nfs/nfsroot.c | 2 +- fs/ufs/super.c | 2 +- include/linux/parser.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c index 8478fc25dae..46763d1cd39 100644 --- a/fs/nfs/nfsroot.c +++ b/fs/nfs/nfsroot.c @@ -127,7 +127,7 @@ enum { Opt_err }; -static match_table_t __initconst tokens = { +static match_table_t __initdata tokens = { {Opt_port, "port=%u"}, {Opt_rsize, "rsize=%u"}, {Opt_wsize, "wsize=%u"}, diff --git a/fs/ufs/super.c b/fs/ufs/super.c index 3e30e40aa24..3141969b456 100644 --- a/fs/ufs/super.c +++ b/fs/ufs/super.c @@ -1233,7 +1233,7 @@ static int ufs_show_options(struct seq_file *seq, struct vfsmount *vfs) { struct ufs_sb_info *sbi = UFS_SB(vfs->mnt_sb); unsigned mval = sbi->s_mount_opt & UFS_MOUNT_UFSTYPE; - const struct match_token *tp = tokens; + struct match_token *tp = tokens; while (tp->token != Opt_onerror_panic && tp->token != mval) ++tp; diff --git a/include/linux/parser.h b/include/linux/parser.h index cc554ca8bc7..7dcd0507575 100644 --- a/include/linux/parser.h +++ b/include/linux/parser.h @@ -14,7 +14,7 @@ struct match_token { const char *pattern; }; -typedef const struct match_token match_table_t[]; +typedef struct match_token match_table_t[]; /* Maximum number of arguments that match_token will find in a pattern */ enum {MAX_OPT_ARGS = 3}; -- GitLab From ae583885bfd07474789059cdef399289bd66c8d0 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 16:56:15 -0700 Subject: [PATCH 0744/1024] sparc64: Remove all cpumask_t local variables in xcall dispatch. All of the xcall delivery implementation is cpumask agnostic, so we can pass around pointers to const cpumask_t objects everywhere. The sad remaining case is the argument to arch_send_call_function_ipi(). Signed-off-by: David S. Miller --- arch/sparc64/kernel/smp.c | 33 +++++++++------------------------ 1 file changed, 9 insertions(+), 24 deletions(-) diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index ac8996ec97b..27b81775a4d 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -787,21 +787,17 @@ static void xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask * except self. Really, there are only two cases currently, * "&cpu_online_map" and "&mm->cpu_vm_mask". */ -static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, const cpumask_t *mask_p) +static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, const cpumask_t *mask) { u64 data0 = (((u64)ctx)<<32 | (((u64)func) & 0xffffffff)); - int this_cpu = get_cpu(); - cpumask_t mask; - mask = *mask_p; - if (mask_p != &cpu_online_map) - cpus_and(mask, mask, cpu_online_map); - cpu_clear(this_cpu, mask); - - xcall_deliver(data0, data1, data2, &mask); - /* NOTE: Caller runs local copy on master. */ + xcall_deliver(data0, data1, data2, mask); +} - put_cpu(); +/* Send cross call to all processors except self. */ +static void smp_cross_call(unsigned long *func, u32 ctx, u64 data1, u64 data2) +{ + smp_cross_call_masked(func, ctx, data1, data2, &cpu_online_map); } extern unsigned long xcall_sync_tick; @@ -827,10 +823,6 @@ void arch_send_call_function_single_ipi(int cpu) &cpumask_of_cpu(cpu)); } -/* Send cross call to all processors except self. */ -#define smp_cross_call(func, ctx, data1, data2) \ - smp_cross_call_masked(func, ctx, data1, data2, &cpu_online_map) - void smp_call_function_client(int irq, struct pt_regs *regs) { clear_softint(1 << irq); @@ -900,7 +892,6 @@ static inline void __local_flush_dcache_page(struct page *page) void smp_flush_dcache_page_impl(struct page *page, int cpu) { - cpumask_t mask = cpumask_of_cpu(cpu); int this_cpu; if (tlb_type == hypervisor) @@ -929,7 +920,7 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu) } if (data0) { xcall_deliver(data0, __pa(pg_addr), - (u64) pg_addr, &mask); + (u64) pg_addr, &cpumask_of_cpu(cpu)); #ifdef CONFIG_DEBUG_DCFLUSH atomic_inc(&dcpage_flushes_xcall); #endif @@ -941,7 +932,6 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu) void flush_dcache_page_all(struct mm_struct *mm, struct page *page) { - cpumask_t mask = cpu_online_map; void *pg_addr; int this_cpu; u64 data0; @@ -951,13 +941,9 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page) this_cpu = get_cpu(); - cpu_clear(this_cpu, mask); - #ifdef CONFIG_DEBUG_DCFLUSH atomic_inc(&dcpage_flushes); #endif - if (cpus_empty(mask)) - goto flush_self; data0 = 0; pg_addr = page_address(page); if (tlb_type == spitfire) { @@ -971,12 +957,11 @@ void flush_dcache_page_all(struct mm_struct *mm, struct page *page) } if (data0) { xcall_deliver(data0, __pa(pg_addr), - (u64) pg_addr, &mask); + (u64) pg_addr, &cpu_online_map); #ifdef CONFIG_DEBUG_DCFLUSH atomic_inc(&dcpage_flushes_xcall); #endif } - flush_self: __local_flush_dcache_page(page); put_cpu(); -- GitLab From 5aa6cf302c2758702348aab7457e516d3a5121b9 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 4 Aug 2008 13:41:10 -0700 Subject: [PATCH 0745/1024] spi: S3C24XX: reset register status on resume. Fix a bug in the spi_s3c24xx driver where it does not reset the registers of the hardware when resuming from suspend (this block has been reset over suspend). Signed-off-by: Ben Dooks Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_s3c24xx.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index 1c643c9e1f1..21661c7959c 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -236,6 +236,19 @@ static irqreturn_t s3c24xx_spi_irq(int irq, void *dev) return IRQ_HANDLED; } +static void s3c24xx_spi_initialsetup(struct s3c24xx_spi *hw) +{ + /* for the moment, permanently enable the clock */ + + clk_enable(hw->clk); + + /* program defaults into the registers */ + + writeb(0xff, hw->regs + S3C2410_SPPRE); + writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN); + writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON); +} + static int __init s3c24xx_spi_probe(struct platform_device *pdev) { struct s3c2410_spi_info *pdata; @@ -327,15 +340,7 @@ static int __init s3c24xx_spi_probe(struct platform_device *pdev) goto err_no_clk; } - /* for the moment, permanently enable the clock */ - - clk_enable(hw->clk); - - /* program defaults into the registers */ - - writeb(0xff, hw->regs + S3C2410_SPPRE); - writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN); - writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON); + s3c24xx_spi_initialsetup(hw); /* setup any gpio we can */ @@ -415,7 +420,7 @@ static int s3c24xx_spi_resume(struct platform_device *pdev) { struct s3c24xx_spi *hw = platform_get_drvdata(pdev); - clk_enable(hw->clk); + s3c24xx_spi_initialsetup(hw); return 0; } -- GitLab From dc329442b9fd365bec95718013586c07ff600c34 Mon Sep 17 00:00:00 2001 From: Gerard Kam Date: Mon, 4 Aug 2008 13:41:12 -0700 Subject: [PATCH 0746/1024] atmel_spi: fix hang due to missed interrupt For some time my at91sam9260 board with JFFS2 on serial flash (m25p80) would hang when accessing the serial flash and SPI bus. Slowing the SPI clock down to 9 MHz reduced the occurrence of the hang from "always" during boot to a nuisance level that allowed other SW development to continue. Finally had to address this issue when an application stresses the I/O to always cause a hang. Hang seems to be caused by a missed SPI interrupt, so that the task ends up waiting forever after calling spi_sync(). The fix has 2 parts. First is to halt the DMA engine before the "current" PDC registers are loaded. This ensures that the "next" registers are loaded before the DMA operation takes off. The second part of the fix is a kludge that adds a "completion" interrupt in case the ENDRX interrupt for the last segment of the DMA chaining operation was missed. The patch allows the SPI clock for the serial flash to be increased from 9 MHz to 15 MHz (or more?). No hangs or SPI overruns were encountered. Haavard: while this patch does indeed improve things, I still see overruns and CRC errors on my NGW100 board when running the DataFlash at 10 MHz. However, I think some improvement is better than nothing, so I'm passing this on for inclusion in 2.6.27. Signed-off-by: Gerard Kam Signed-off-by: Haavard Skinnemoen Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/atmel_spi.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index 0c716566085..95190c619c1 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -184,7 +184,8 @@ static void atmel_spi_next_xfer(struct spi_master *master, { struct atmel_spi *as = spi_master_get_devdata(master); struct spi_transfer *xfer; - u32 len, remaining, total; + u32 len, remaining; + u32 ieval; dma_addr_t tx_dma, rx_dma; if (!as->current_transfer) @@ -197,6 +198,8 @@ static void atmel_spi_next_xfer(struct spi_master *master, xfer = NULL; if (xfer) { + spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS)); + len = xfer->len; atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); remaining = xfer->len - len; @@ -234,6 +237,8 @@ static void atmel_spi_next_xfer(struct spi_master *master, as->next_transfer = xfer; if (xfer) { + u32 total; + total = len; atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len); as->next_remaining_bytes = total - len; @@ -250,9 +255,11 @@ static void atmel_spi_next_xfer(struct spi_master *master, " next xfer %p: len %u tx %p/%08x rx %p/%08x\n", xfer, xfer->len, xfer->tx_buf, xfer->tx_dma, xfer->rx_buf, xfer->rx_dma); + ieval = SPI_BIT(ENDRX) | SPI_BIT(OVRES); } else { spi_writel(as, RNCR, 0); spi_writel(as, TNCR, 0); + ieval = SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES); } /* REVISIT: We're waiting for ENDRX before we start the next @@ -265,7 +272,7 @@ static void atmel_spi_next_xfer(struct spi_master *master, * * It should be doable, though. Just not now... */ - spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES)); + spi_writel(as, IER, ieval); spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN)); } @@ -396,7 +403,7 @@ atmel_spi_interrupt(int irq, void *dev_id) ret = IRQ_HANDLED; - spi_writel(as, IDR, (SPI_BIT(ENDTX) | SPI_BIT(ENDRX) + spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX) | SPI_BIT(OVRES))); /* @@ -418,7 +425,7 @@ atmel_spi_interrupt(int irq, void *dev_id) if (xfer->delay_usecs) udelay(xfer->delay_usecs); - dev_warn(master->dev.parent, "fifo overrun (%u/%u remaining)\n", + dev_warn(master->dev.parent, "overrun (%u/%u remaining)\n", spi_readl(as, TCR), spi_readl(as, RCR)); /* @@ -442,7 +449,7 @@ atmel_spi_interrupt(int irq, void *dev_id) spi_readl(as, SR); atmel_spi_msg_done(master, as, msg, -EIO, 0); - } else if (pending & SPI_BIT(ENDRX)) { + } else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) { ret = IRQ_HANDLED; spi_writel(as, IDR, pending); -- GitLab From a477097d9c37c1cf289c7f0257dffcfa42d50197 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Mon, 4 Aug 2008 13:41:14 -0700 Subject: [PATCH 0747/1024] mlock() fix return values Halesh says: Please find the below testcase provide to test mlock. Test Case : =========================== #include #include #include #include #include #include #include #include #include int main(void) { int fd,ret, i = 0; char *addr, *addr1 = NULL; unsigned int page_size; struct rlimit rlim; if (0 != geteuid()) { printf("Execute this pgm as root\n"); exit(1); } /* create a file */ if ((fd = open("mmap_test.c",O_RDWR|O_CREAT,0755)) == -1) { printf("cant create test file\n"); exit(1); } page_size = sysconf(_SC_PAGE_SIZE); /* set the MEMLOCK limit */ rlim.rlim_cur = 2000; rlim.rlim_max = 2000; if ((ret = setrlimit(RLIMIT_MEMLOCK,&rlim)) != 0) { printf("Cant change limit values\n"); exit(1); } addr = 0; while (1) { /* map a page into memory each time*/ if ((addr = (char *) mmap(addr,page_size, PROT_READ | PROT_WRITE,MAP_SHARED,fd,0)) == MAP_FAILED) { printf("cant do mmap on file\n"); exit(1); } if (0 == i) addr1 = addr; i++; errno = 0; /* lock the mapped memory pagewise*/ if ((ret = mlock((char *)addr, 1500)) == -1) { printf("errno value is %d\n", errno); printf("cant lock maped region\n"); exit(1); } addr = addr + page_size; } } ====================================================== This testcase results in an mlock() failure with errno 14 that is EFAULT, but it has nowhere been specified that mlock() will return EFAULT. When I tested the same on older kernels like 2.6.18, I got the correct result i.e errno 12 (ENOMEM). I think in source code mlock(2), setting errno ENOMEM has been missed in do_mlock() , on mlock_fixup() failure. SUSv3 requires the following behavior frmo mlock(2). [ENOMEM] Some or all of the address range specified by the addr and len arguments does not correspond to valid mapped pages in the address space of the process. [EAGAIN] Some or all of the memory identified by the operation could not be locked when the call was made. This rule isn't so nice and slighly strange. but many people think POSIX/SUS compliance is important. Reported-by: Halesh Sadashiv Tested-by: Halesh Sadashiv Signed-off-by: KOSAKI Motohiro Cc: [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory.c | 16 +++++++++++++--- mm/mlock.c | 2 -- 2 files changed, 13 insertions(+), 5 deletions(-) diff --git a/mm/memory.c b/mm/memory.c index 6793b9c6810..a472bcd4b06 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2765,16 +2765,26 @@ int make_pages_present(unsigned long addr, unsigned long end) vma = find_vma(current->mm, addr); if (!vma) - return -1; + return -ENOMEM; write = (vma->vm_flags & VM_WRITE) != 0; BUG_ON(addr >= end); BUG_ON(end > vma->vm_end); len = DIV_ROUND_UP(end, PAGE_SIZE) - addr/PAGE_SIZE; ret = get_user_pages(current, current->mm, addr, len, write, 0, NULL, NULL); - if (ret < 0) + if (ret < 0) { + /* + SUS require strange return value to mlock + - invalid addr generate to ENOMEM. + - out of memory should generate EAGAIN. + */ + if (ret == -EFAULT) + ret = -ENOMEM; + else if (ret == -ENOMEM) + ret = -EAGAIN; return ret; - return ret == len ? 0 : -1; + } + return ret == len ? 0 : -ENOMEM; } #if !defined(__HAVE_ARCH_GATE_AREA) diff --git a/mm/mlock.c b/mm/mlock.c index 7b2656055d6..01fbe93eff5 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -78,8 +78,6 @@ success: mm->locked_vm -= pages; out: - if (ret == -ENOMEM) - ret = -EAGAIN; return ret; } -- GitLab From c2d5cedadcd3976cfc1fa5590e3a73a059c6401a Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sat, 2 Aug 2008 21:10:23 +0800 Subject: [PATCH 0748/1024] drivers/char/efirtc.c: removed duplicated #include Removed duplicated include in drivers/char/efirtc.c. Signed-off-by: Huang Weiyi Signed-off-by: Linus Torvalds --- drivers/char/efirtc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c index 67fbd7aab5d..34d15d54823 100644 --- a/drivers/char/efirtc.c +++ b/drivers/char/efirtc.c @@ -37,7 +37,6 @@ #include #include #include -#include #include #include -- GitLab From 82e68f7ffec3800425f2391c8c86277606860442 Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Sat, 2 Aug 2008 18:25:16 +0200 Subject: [PATCH 0749/1024] sound: ensure device number is valid in snd_seq_oss_synth_make_info snd_seq_oss_synth_make_info() incorrectly reports information to userspace without first checking for the validity of the device number, leading to possible information leak (CVE-2008-3272). Reported-By: Tobias Klein Acked-and-tested-by: Takashi Iwai Cc: stable@kernel.org Signed-off-by: Willy Tarreau Signed-off-by: Linus Torvalds --- sound/core/seq/oss/seq_oss_synth.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/core/seq/oss/seq_oss_synth.c b/sound/core/seq/oss/seq_oss_synth.c index 558dadbf45f..e024e4588b8 100644 --- a/sound/core/seq/oss/seq_oss_synth.c +++ b/sound/core/seq/oss/seq_oss_synth.c @@ -604,6 +604,9 @@ snd_seq_oss_synth_make_info(struct seq_oss_devinfo *dp, int dev, struct synth_in { struct seq_oss_synth *rec; + if (dev < 0 || dev >= dp->max_synthdev) + return -ENXIO; + if (dp->synths[dev].is_midi) { struct midi_info minf; snd_seq_oss_midi_make_info(dp, dp->synths[dev].midi_mapped, &minf); -- GitLab From b1cbefe5d5fc2d4a6109961d914027172ce8e152 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:22:11 +0100 Subject: [PATCH 0750/1024] blackfin: Fix compile failure in tty code Blackfin peers into the ldisc in an odd way for IRDA snooping which therefore got missed. Simple enough fix. Closes bug #11233 Signed-off-by: Linus Torvalds --- drivers/serial/bfin_5xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 9d8543762a3..efcd44344fb 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -817,7 +817,7 @@ static void bfin_serial_set_ldisc(struct uart_port *port) if (line >= port->info->port.tty->driver->num) return; - switch (port->info->port.tty->ldisc.num) { + switch (port->info->port.tty->termios->c_line) { case N_IRDA: val = UART_GET_GCTL(&bfin_serial_ports[line]); val |= (IREN | RPOLC); -- GitLab From d7283353221e73a793847252d063ff9186885160 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:21:18 +0100 Subject: [PATCH 0751/1024] cris: Fixup compile problems It now compiles with the tty changes but isn't tested (which has to be better than not compiling.. Closes bug #11218 Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/crisv10.c | 79 ++++++++++++++++++++-------------------- drivers/serial/crisv10.h | 3 +- 2 files changed, 42 insertions(+), 40 deletions(-) diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 8249ac49055..bf94a770bb4 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -234,7 +234,7 @@ unsigned long r_alt_ser_baudrate_shadow = 0; static struct e100_serial rs_table[] = { { .baud = DEF_BAUD, - .port = (unsigned char *)R_SERIAL0_CTRL, + .ioport = (unsigned char *)R_SERIAL0_CTRL, .irq = 1U << 12, /* uses DMA 6 and 7 */ .oclrintradr = R_DMA_CH6_CLR_INTR, .ofirstadr = R_DMA_CH6_FIRST, @@ -288,7 +288,7 @@ static struct e100_serial rs_table[] = { }, /* ttyS0 */ #ifndef CONFIG_SVINTO_SIM { .baud = DEF_BAUD, - .port = (unsigned char *)R_SERIAL1_CTRL, + .ioport = (unsigned char *)R_SERIAL1_CTRL, .irq = 1U << 16, /* uses DMA 8 and 9 */ .oclrintradr = R_DMA_CH8_CLR_INTR, .ofirstadr = R_DMA_CH8_FIRST, @@ -344,7 +344,7 @@ static struct e100_serial rs_table[] = { }, /* ttyS1 */ { .baud = DEF_BAUD, - .port = (unsigned char *)R_SERIAL2_CTRL, + .ioport = (unsigned char *)R_SERIAL2_CTRL, .irq = 1U << 4, /* uses DMA 2 and 3 */ .oclrintradr = R_DMA_CH2_CLR_INTR, .ofirstadr = R_DMA_CH2_FIRST, @@ -398,7 +398,7 @@ static struct e100_serial rs_table[] = { }, /* ttyS2 */ { .baud = DEF_BAUD, - .port = (unsigned char *)R_SERIAL3_CTRL, + .ioport = (unsigned char *)R_SERIAL3_CTRL, .irq = 1U << 8, /* uses DMA 4 and 5 */ .oclrintradr = R_DMA_CH4_CLR_INTR, .ofirstadr = R_DMA_CH4_FIRST, @@ -939,7 +939,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] = /* Output */ #define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK) /* Input */ -#define E100_CTS_GET(info) ((info)->port[REG_STATUS] & E100_CTS_MASK) +#define E100_CTS_GET(info) ((info)->ioport[REG_STATUS] & E100_CTS_MASK) /* These are typically PA or PB and 0 means 0V, 1 means 3.3V */ /* Is an output */ @@ -1092,7 +1092,7 @@ e100_rts(struct e100_serial *info, int set) local_irq_save(flags); info->rx_ctrl &= ~E100_RTS_MASK; info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */ - info->port[REG_REC_CTRL] = info->rx_ctrl; + info->ioport[REG_REC_CTRL] = info->rx_ctrl; local_irq_restore(flags); #ifdef SERIAL_DEBUG_IO printk("ser%i rts %i\n", info->line, set); @@ -1142,7 +1142,7 @@ e100_disable_rx(struct e100_serial *info) { #ifndef CONFIG_SVINTO_SIM /* disable the receiver */ - info->port[REG_REC_CTRL] = + info->ioport[REG_REC_CTRL] = (info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); #endif } @@ -1152,7 +1152,7 @@ e100_enable_rx(struct e100_serial *info) { #ifndef CONFIG_SVINTO_SIM /* enable the receiver */ - info->port[REG_REC_CTRL] = + info->ioport[REG_REC_CTRL] = (info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); #endif } @@ -1490,7 +1490,7 @@ rs_stop(struct tty_struct *tty) xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); } - *((unsigned long *)&info->port[REG_XOFF]) = xoff; + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; local_irq_restore(flags); } } @@ -1513,7 +1513,7 @@ rs_start(struct tty_struct *tty) xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); } - *((unsigned long *)&info->port[REG_XOFF]) = xoff; + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; if (!info->uses_dma_out && info->xmit.head != info->xmit.tail && info->xmit.buf) e100_enable_serial_tx_ready_irq(info); @@ -1888,7 +1888,7 @@ static void receive_chars_dma(struct e100_serial *info) handle_all_descr_data(info); /* Read the status register to detect errors */ - rstat = info->port[REG_STATUS]; + rstat = info->ioport[REG_STATUS]; if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat)); } @@ -1897,7 +1897,7 @@ static void receive_chars_dma(struct e100_serial *info) /* If we got an error, we must reset it by reading the * data_in field */ - unsigned char data = info->port[REG_DATA]; + unsigned char data = info->ioport[REG_DATA]; PROCSTAT(ser_stat[info->line].errors_cnt++); DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n", @@ -2077,7 +2077,7 @@ static int force_eop_if_needed(struct e100_serial *info) /* We check data_avail bit to determine if data has * arrived since last time */ - unsigned char rstat = info->port[REG_STATUS]; + unsigned char rstat = info->ioport[REG_STATUS]; /* error or datavail? */ if (rstat & SER_ERROR_MASK) { @@ -2096,7 +2096,7 @@ static int force_eop_if_needed(struct e100_serial *info) TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n", rstat | (info->line << 8))); /* Read data to clear status flags */ - (void)info->port[REG_DATA]; + (void)info->ioport[REG_DATA]; info->forced_eop = 0; START_FLUSH_FAST_TIMER(info, "magic"); @@ -2296,7 +2296,7 @@ struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info) } /* Read data and status at the same time */ - data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]); + data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); more_data: if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) { DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); @@ -2391,7 +2391,7 @@ more_data: info->icount.rx++; - data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]); + data_read = *((unsigned long *)&info->ioport[REG_DATA_STATUS32]); if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { DEBUG_LOG(info->line, "ser_rx %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read)); goto more_data; @@ -2413,7 +2413,7 @@ static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) return handle_ser_rx_interrupt_no_dma(info); } /* DMA is used */ - rstat = info->port[REG_STATUS]; + rstat = info->ioport[REG_STATUS]; if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); } @@ -2426,7 +2426,7 @@ static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) /* If we got an error, we must reset it by reading the * data_in field */ - data = info->port[REG_DATA]; + data = info->ioport[REG_DATA]; DINTR1(DEBUG_LOG(info->line, "ser_rx! %c\n", data)); DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat)); if (!data && (rstat & SER_FRAMING_ERR_MASK)) { @@ -2528,10 +2528,10 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) unsigned char rstat; DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char)); local_irq_save(flags); - rstat = info->port[REG_STATUS]; + rstat = info->ioport[REG_STATUS]; DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); - info->port[REG_TR_DATA] = info->x_char; + info->ioport[REG_TR_DATA] = info->x_char; info->icount.tx++; info->x_char = 0; /* We must enable since it is disabled in ser_interrupt */ @@ -2545,7 +2545,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) /* We only use normal tx interrupt when sending x_char */ DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0)); local_irq_save(flags); - rstat = info->port[REG_STATUS]; + rstat = info->ioport[REG_STATUS]; DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); e100_disable_serial_tx_ready_irq(info); if (info->port.tty->stopped) @@ -2573,7 +2573,7 @@ static void handle_ser_tx_interrupt(struct e100_serial *info) DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail])); /* Send a byte, rs485 timing is critical so turn of ints */ local_irq_save(flags); - info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; + info->ioport[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1); info->icount.tx++; if (info->xmit.head == info->xmit.tail) { @@ -2848,7 +2848,7 @@ startup(struct e100_serial * info) /* dummy read to reset any serial errors */ - (void)info->port[REG_DATA]; + (void)info->ioport[REG_DATA]; /* enable the interrupts */ if (info->uses_dma_out) @@ -2897,7 +2897,7 @@ shutdown(struct e100_serial * info) /* shut down the transmitter and receiver */ DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line)); e100_disable_rx(info); - info->port[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40); + info->ioport[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40); /* disable interrupts, reset dma channels */ if (info->uses_dma_in) { @@ -2968,7 +2968,7 @@ change_speed(struct e100_serial *info) if (!info->port.tty || !info->port.tty->termios) return; - if (!info->port) + if (!info->ioport) return; cflag = info->port.tty->termios->c_cflag; @@ -3037,7 +3037,7 @@ change_speed(struct e100_serial *info) info->baud = cflag_to_baud(cflag); #ifndef CONFIG_SVINTO_SIM - info->port[REG_BAUD] = cflag_to_etrax_baud(cflag); + info->ioport[REG_BAUD] = cflag_to_etrax_baud(cflag); #endif /* CONFIG_SVINTO_SIM */ } @@ -3097,8 +3097,8 @@ change_speed(struct e100_serial *info) /* actually write the control regs to the hardware */ - info->port[REG_TR_CTRL] = info->tx_ctrl; - info->port[REG_REC_CTRL] = info->rx_ctrl; + info->ioport[REG_TR_CTRL] = info->tx_ctrl; + info->ioport[REG_REC_CTRL] = info->rx_ctrl; xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->port.tty)); xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); if (info->port.tty->termios->c_iflag & IXON ) { @@ -3107,7 +3107,7 @@ change_speed(struct e100_serial *info) xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); } - *((unsigned long *)&info->port[REG_XOFF]) = xoff; + *((unsigned long *)&info->ioport[REG_XOFF]) = xoff; local_irq_restore(flags); #endif /* !CONFIG_SVINTO_SIM */ @@ -3156,7 +3156,7 @@ static int rs_raw_write(struct tty_struct *tty, #ifdef SERIAL_DEBUG_DATA if (info->line == SERIAL_DEBUG_LINE) printk("rs_raw_write (%d), status %d\n", - count, info->port[REG_STATUS]); + count, info->ioport[REG_STATUS]); #endif #ifdef CONFIG_SVINTO_SIM @@ -3427,7 +3427,7 @@ get_serial_info(struct e100_serial * info, memset(&tmp, 0, sizeof(tmp)); tmp.type = info->type; tmp.line = info->line; - tmp.port = (int)info->port; + tmp.port = (int)info->ioport; tmp.irq = info->irq; tmp.flags = info->flags; tmp.baud_base = info->baud_base; @@ -3557,14 +3557,14 @@ char *get_control_state_str(int MLines, char *s) } #endif -static void +static int rs_break(struct tty_struct *tty, int break_state) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; unsigned long flags; - if (!info->port) - return; + if (!info->ioport) + return -EIO; local_irq_save(flags); if (break_state == -1) { @@ -3575,8 +3575,9 @@ rs_break(struct tty_struct *tty, int break_state) /* Set bit 7 (txd) and 6 (tr_enable) */ info->tx_ctrl |= (0x80 | 0x40); } - info->port[REG_TR_CTRL] = info->tx_ctrl; + info->ioport[REG_TR_CTRL] = info->tx_ctrl; local_irq_restore(flags); + return 0; } static int @@ -4231,9 +4232,9 @@ static int line_info(char *buf, struct e100_serial *info) unsigned long tmp; ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d", - info->line, (unsigned long)info->port, info->irq); + info->line, (unsigned long)info->ioport, info->irq); - if (!info->port || (info->type == PORT_UNKNOWN)) { + if (!info->ioport || (info->type == PORT_UNKNOWN)) { ret += sprintf(buf+ret, "\n"); return ret; } @@ -4281,7 +4282,7 @@ static int line_info(char *buf, struct e100_serial *info) } { - unsigned char rstat = info->port[REG_STATUS]; + unsigned char rstat = info->ioport[REG_STATUS]; if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) ret += sprintf(buf+ret, " xoff_detect:1"); } @@ -4502,7 +4503,7 @@ rs_init(void) if (info->enabled) { printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n", - serial_driver->name, info->line, (unsigned int)info->port); + serial_driver->name, info->line, (unsigned int)info->ioport); } } #ifdef CONFIG_ETRAX_FAST_TIMER diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h index ccd0f32b737..e3c5c8c3c09 100644 --- a/drivers/serial/crisv10.h +++ b/drivers/serial/crisv10.h @@ -36,8 +36,9 @@ struct etrax_recv_buffer { }; struct e100_serial { + struct tty_port port; int baud; - volatile u8 *port; /* R_SERIALx_CTRL */ + volatile u8 *ioport; /* R_SERIALx_CTRL */ u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */ /* Output registers */ -- GitLab From d5cae364148088911bdf007a8aaefb46a92f16f7 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:47:07 +0100 Subject: [PATCH 0752/1024] vt: Deadlock workaround 2.6.26 corrected the mutex locking on tty resizing to fix the case where you could get the tty/vt sizing out of sync. That turns out to have a deadlock. The actual fix is really major and I've got it lined up as part of the ops changes for 2.6.28 so for 2.6.26/2.6.27 it is safer to reintroduce this ages old minor bug. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/vt.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 82a51f38a54..1bc00c9d860 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -916,7 +916,6 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines) ws.ws_col = vc->vc_cols; ws.ws_ypixel = vc->vc_scan_lines; - mutex_lock(&vc->vc_tty->termios_mutex); spin_lock_irq(&vc->vc_tty->ctrl_lock); if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col)) pgrp = get_pid(vc->vc_tty->pgrp); @@ -926,7 +925,6 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines) put_pid(pgrp); } *cws = ws; - mutex_unlock(&vc->vc_tty->termios_mutex); } if (CON_IS_VISIBLE(vc)) -- GitLab From 670d59c0ae31a872341785b1d93add284c1653ff Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:53:22 +0100 Subject: [PATCH 0753/1024] ar7_wdt watchdog driver: Fix locking Use unlocked_ioctl Remove semaphores Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/watchdog/ar7_wdt.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c index 2eb48c0df32..ef7b0d67095 100644 --- a/drivers/watchdog/ar7_wdt.c +++ b/drivers/watchdog/ar7_wdt.c @@ -69,7 +69,8 @@ struct ar7_wdt { u32 prescale; }; -static struct semaphore open_semaphore; +static unsigned long wdt_is_open; +static spinlock_t wdt_lock; static unsigned expect_close; /* XXX currently fixed, allows max margin ~68.72 secs */ @@ -154,8 +155,10 @@ static void ar7_wdt_update_margin(int new_margin) u32 change; change = new_margin * (ar7_vbus_freq() / prescale_value); - if (change < 1) change = 1; - if (change > 0xffff) change = 0xffff; + if (change < 1) + change = 1; + if (change > 0xffff) + change = 0xffff; ar7_wdt_change(change); margin = change * prescale_value / ar7_vbus_freq(); printk(KERN_INFO DRVNAME @@ -179,7 +182,7 @@ static void ar7_wdt_disable_wdt(void) static int ar7_wdt_open(struct inode *inode, struct file *file) { /* only allow one at a time */ - if (down_trylock(&open_semaphore)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; ar7_wdt_enable_wdt(); expect_close = 0; @@ -195,9 +198,7 @@ static int ar7_wdt_release(struct inode *inode, struct file *file) "will not disable the watchdog timer\n"); else if (!nowayout) ar7_wdt_disable_wdt(); - - up(&open_semaphore); - + clear_bit(0, &wdt_is_open); return 0; } @@ -222,7 +223,9 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data, if (len) { size_t i; + spin_lock(&wdt_lock); ar7_wdt_kick(1); + spin_unlock(&wdt_lock); expect_close = 0; for (i = 0; i < len; ++i) { @@ -237,8 +240,8 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data, return len; } -static int ar7_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ar7_wdt_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) { static struct watchdog_info ident = { .identity = LONGNAME, @@ -269,8 +272,10 @@ static int ar7_wdt_ioctl(struct inode *inode, struct file *file, if (new_margin < 1) return -EINVAL; + spin_lock(&wdt_lock); ar7_wdt_update_margin(new_margin); ar7_wdt_kick(1); + spin_unlock(&wdt_lock); case WDIOC_GETTIMEOUT: if (put_user(margin, (int *)arg)) @@ -282,7 +287,7 @@ static int ar7_wdt_ioctl(struct inode *inode, struct file *file, static const struct file_operations ar7_wdt_fops = { .owner = THIS_MODULE, .write = ar7_wdt_write, - .ioctl = ar7_wdt_ioctl, + .unlocked_ioctl = ar7_wdt_ioctl, .open = ar7_wdt_open, .release = ar7_wdt_release, }; @@ -297,6 +302,8 @@ static int __init ar7_wdt_init(void) { int rc; + spin_lock_init(&wdt_lock); + ar7_wdt_get_regs(); if (!request_mem_region(ar7_regs_wdt, sizeof(struct ar7_wdt), @@ -312,8 +319,6 @@ static int __init ar7_wdt_init(void) ar7_wdt_prescale(prescale_value); ar7_wdt_update_margin(margin); - sema_init(&open_semaphore, 1); - rc = register_reboot_notifier(&ar7_wdt_notifier); if (rc) { printk(KERN_ERR DRVNAME -- GitLab From d6547378df1c11bc6790b87abedb3526ded40ef9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:54:01 +0100 Subject: [PATCH 0754/1024] it8712f_wdt: Locking and coding style Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/watchdog/it8712f_wdt.c | 77 ++++++++++++---------------------- 1 file changed, 27 insertions(+), 50 deletions(-) diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c index 445b7e81211..51bfd572183 100644 --- a/drivers/watchdog/it8712f_wdt.c +++ b/drivers/watchdog/it8712f_wdt.c @@ -30,9 +30,8 @@ #include #include #include - -#include -#include +#include +#include #define NAME "it8712f_wdt" @@ -50,7 +49,7 @@ static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); -static struct semaphore it8712f_wdt_sem; +static unsigned long wdt_open; static unsigned expect_close; static spinlock_t io_lock; static unsigned char revision; @@ -86,22 +85,19 @@ static unsigned short address; #define WDT_OUT_PWROK 0x10 #define WDT_OUT_KRST 0x40 -static int -superio_inb(int reg) +static int superio_inb(int reg) { outb(reg, REG); return inb(VAL); } -static void -superio_outb(int val, int reg) +static void superio_outb(int val, int reg) { outb(reg, REG); outb(val, VAL); } -static int -superio_inw(int reg) +static int superio_inw(int reg) { int val; outb(reg++, REG); @@ -111,15 +107,13 @@ superio_inw(int reg) return val; } -static inline void -superio_select(int ldn) +static inline void superio_select(int ldn) { outb(LDN, REG); outb(ldn, VAL); } -static inline void -superio_enter(void) +static inline void superio_enter(void) { spin_lock(&io_lock); outb(0x87, REG); @@ -128,22 +122,19 @@ superio_enter(void) outb(0x55, REG); } -static inline void -superio_exit(void) +static inline void superio_exit(void) { outb(0x02, REG); outb(0x02, VAL); spin_unlock(&io_lock); } -static inline void -it8712f_wdt_ping(void) +static inline void it8712f_wdt_ping(void) { inb(address); } -static void -it8712f_wdt_update_margin(void) +static void it8712f_wdt_update_margin(void) { int config = WDT_OUT_KRST | WDT_OUT_PWROK; int units = margin; @@ -165,8 +156,7 @@ it8712f_wdt_update_margin(void) superio_outb(units, WDT_TIMEOUT); } -static int -it8712f_wdt_get_status(void) +static int it8712f_wdt_get_status(void) { if (superio_inb(WDT_CONTROL) & 0x01) return WDIOF_CARDRESET; @@ -174,8 +164,7 @@ it8712f_wdt_get_status(void) return 0; } -static void -it8712f_wdt_enable(void) +static void it8712f_wdt_enable(void) { printk(KERN_DEBUG NAME ": enabling watchdog timer\n"); superio_enter(); @@ -190,8 +179,7 @@ it8712f_wdt_enable(void) it8712f_wdt_ping(); } -static void -it8712f_wdt_disable(void) +static void it8712f_wdt_disable(void) { printk(KERN_DEBUG NAME ": disabling watchdog timer\n"); @@ -207,8 +195,7 @@ it8712f_wdt_disable(void) superio_exit(); } -static int -it8712f_wdt_notify(struct notifier_block *this, +static int it8712f_wdt_notify(struct notifier_block *this, unsigned long code, void *unused) { if (code == SYS_HALT || code == SYS_POWER_OFF) @@ -222,9 +209,8 @@ static struct notifier_block it8712f_wdt_notifier = { .notifier_call = it8712f_wdt_notify, }; -static ssize_t -it8712f_wdt_write(struct file *file, const char __user *data, - size_t len, loff_t *ppos) +static ssize_t it8712f_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { /* check for a magic close character */ if (len) { @@ -245,9 +231,8 @@ it8712f_wdt_write(struct file *file, const char __user *data, return len; } -static int -it8712f_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -302,19 +287,16 @@ it8712f_wdt_ioctl(struct inode *inode, struct file *file, } } -static int -it8712f_wdt_open(struct inode *inode, struct file *file) +static int it8712f_wdt_open(struct inode *inode, struct file *file) { /* only allow one at a time */ - if (down_trylock(&it8712f_wdt_sem)) + if (test_and_set_bit(0, &wdt_open)) return -EBUSY; it8712f_wdt_enable(); - return nonseekable_open(inode, file); } -static int -it8712f_wdt_release(struct inode *inode, struct file *file) +static int it8712f_wdt_release(struct inode *inode, struct file *file) { if (expect_close != 42) { printk(KERN_WARNING NAME @@ -324,7 +306,7 @@ it8712f_wdt_release(struct inode *inode, struct file *file) it8712f_wdt_disable(); } expect_close = 0; - up(&it8712f_wdt_sem); + clear_bit(0, &wdt_open); return 0; } @@ -333,7 +315,7 @@ static const struct file_operations it8712f_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = it8712f_wdt_write, - .ioctl = it8712f_wdt_ioctl, + .unlocked_ioctl = it8712f_wdt_ioctl, .open = it8712f_wdt_open, .release = it8712f_wdt_release, }; @@ -344,8 +326,7 @@ static struct miscdevice it8712f_wdt_miscdev = { .fops = &it8712f_wdt_fops, }; -static int __init -it8712f_wdt_find(unsigned short *address) +static int __init it8712f_wdt_find(unsigned short *address) { int err = -ENODEV; int chip_type; @@ -387,8 +368,7 @@ exit: return err; } -static int __init -it8712f_wdt_init(void) +static int __init it8712f_wdt_init(void) { int err = 0; @@ -404,8 +384,6 @@ it8712f_wdt_init(void) it8712f_wdt_disable(); - sema_init(&it8712f_wdt_sem, 1); - err = register_reboot_notifier(&it8712f_wdt_notifier); if (err) { printk(KERN_ERR NAME ": unable to register reboot notifier\n"); @@ -430,8 +408,7 @@ out: return err; } -static void __exit -it8712f_wdt_exit(void) +static void __exit it8712f_wdt_exit(void) { misc_deregister(&it8712f_wdt_miscdev); unregister_reboot_notifier(&it8712f_wdt_notifier); -- GitLab From 41dc8b72e37c514f7332cbc3f3dd864910c2a1fa Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:54:46 +0100 Subject: [PATCH 0755/1024] s3c2410_wdt watchdog driver: Locking and coding style Kill off use of semaphores. Fix ioctl races and locking holes. From: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/watchdog/s3c2410_wdt.c | 148 ++++++++++++++++++--------------- 1 file changed, 80 insertions(+), 68 deletions(-) diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 98532c0e068..97b4a2e8eb0 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -46,9 +46,8 @@ #include #include #include - -#include -#include +#include +#include #include @@ -65,8 +64,8 @@ static int nowayout = WATCHDOG_NOWAYOUT; static int tmr_margin = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME; static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT; -static int soft_noboot = 0; -static int debug = 0; +static int soft_noboot; +static int debug; module_param(tmr_margin, int, 0); module_param(tmr_atboot, int, 0); @@ -74,24 +73,23 @@ module_param(nowayout, int, 0); module_param(soft_noboot, int, 0); module_param(debug, int, 0); -MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")"); - -MODULE_PARM_DESC(tmr_atboot, "Watchdog is started at boot time if set to 1, default=" __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT)); - -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); - +MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. default=" + __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")"); +MODULE_PARM_DESC(tmr_atboot, + "Watchdog is started at boot time if set to 1, default=" + __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT)); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default depends on ONLY_TESTING)"); - MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug, (default 0)"); typedef enum close_state { CLOSE_STATE_NOT, - CLOSE_STATE_ALLOW=0x4021 + CLOSE_STATE_ALLOW = 0x4021 } close_state_t; -static DECLARE_MUTEX(open_lock); - +static unsigned long open_lock; static struct device *wdt_dev; /* platform device attached to */ static struct resource *wdt_mem; static struct resource *wdt_irq; @@ -99,38 +97,58 @@ static struct clk *wdt_clock; static void __iomem *wdt_base; static unsigned int wdt_count; static close_state_t allow_close; +static DEFINE_SPINLOCK(wdt_lock); /* watchdog control routines */ #define DBG(msg...) do { \ if (debug) \ printk(KERN_INFO msg); \ - } while(0) + } while (0) /* functions */ -static int s3c2410wdt_keepalive(void) +static void s3c2410wdt_keepalive(void) { + spin_lock(&wdt_lock); writel(wdt_count, wdt_base + S3C2410_WTCNT); - return 0; + spin_unlock(&wdt_lock); } -static int s3c2410wdt_stop(void) +static void __s3c2410wdt_stop(void) { unsigned long wtcon; + spin_lock(&wdt_lock); wtcon = readl(wdt_base + S3C2410_WTCON); wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN); writel(wtcon, wdt_base + S3C2410_WTCON); + spin_unlock(&wdt_lock); +} - return 0; +static void __s3c2410wdt_stop(void) +{ + unsigned long wtcon; + + wtcon = readl(wdt_base + S3C2410_WTCON); + wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN); + writel(wtcon, wdt_base + S3C2410_WTCON); +} + +static void s3c2410wdt_stop(void) +{ + spin_lock(&wdt_lock); + __s3c2410wdt_stop(); + spin_unlock(&wdt_lock); } -static int s3c2410wdt_start(void) +static void s3c2410wdt_start(void) { unsigned long wtcon; - s3c2410wdt_stop(); + spin_lock(&wdt_lock); + + __s3c2410wdt_stop(); wtcon = readl(wdt_base + S3C2410_WTCON); wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128; @@ -149,6 +167,7 @@ static int s3c2410wdt_start(void) writel(wdt_count, wdt_base + S3C2410_WTDAT); writel(wdt_count, wdt_base + S3C2410_WTCNT); writel(wtcon, wdt_base + S3C2410_WTCON); + spin_unlock(&wdt_lock); return 0; } @@ -211,7 +230,7 @@ static int s3c2410wdt_set_heartbeat(int timeout) static int s3c2410wdt_open(struct inode *inode, struct file *file) { - if(down_trylock(&open_lock)) + if (test_and_set_bit(0, &open_lock)) return -EBUSY; if (nowayout) @@ -231,15 +250,14 @@ static int s3c2410wdt_release(struct inode *inode, struct file *file) * Lock it in if it's a module and we set nowayout */ - if (allow_close == CLOSE_STATE_ALLOW) { + if (allow_close == CLOSE_STATE_ALLOW) s3c2410wdt_stop(); - } else { + else { dev_err(wdt_dev, "Unexpected close, not stopping watchdog\n"); s3c2410wdt_keepalive(); } - allow_close = CLOSE_STATE_NOT; - up(&open_lock); + clear_bit(0, &open_lock); return 0; } @@ -249,7 +267,7 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data, /* * Refresh the timer. */ - if(len) { + if (len) { if (!nowayout) { size_t i; @@ -265,7 +283,6 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data, allow_close = CLOSE_STATE_ALLOW; } } - s3c2410wdt_keepalive(); } return len; @@ -273,48 +290,41 @@ static ssize_t s3c2410wdt_write(struct file *file, const char __user *data, #define OPTIONS WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE -static struct watchdog_info s3c2410_wdt_ident = { +static const struct watchdog_info s3c2410_wdt_ident = { .options = OPTIONS, .firmware_version = 0, .identity = "S3C2410 Watchdog", }; -static int s3c2410wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long s3c2410wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; int new_margin; switch (cmd) { - default: - return -ENOTTY; - - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &s3c2410_wdt_ident, - sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_KEEPALIVE: - s3c2410wdt_keepalive(); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_margin, p)) - return -EFAULT; - - if (s3c2410wdt_set_heartbeat(new_margin)) - return -EINVAL; - - s3c2410wdt_keepalive(); - return put_user(tmr_margin, p); - - case WDIOC_GETTIMEOUT: - return put_user(tmr_margin, p); + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &s3c2410_wdt_ident, + sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + s3c2410wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, p)) + return -EFAULT; + if (s3c2410wdt_set_heartbeat(new_margin)) + return -EINVAL; + s3c2410wdt_keepalive(); + return put_user(tmr_margin, p); + case WDIOC_GETTIMEOUT: + return put_user(tmr_margin, p); } } @@ -324,7 +334,7 @@ static const struct file_operations s3c2410wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = s3c2410wdt_write, - .ioctl = s3c2410wdt_ioctl, + .unlocked_ioctl = s3c2410wdt_ioctl, .open = s3c2410wdt_open, .release = s3c2410wdt_release, }; @@ -411,14 +421,15 @@ static int s3c2410wdt_probe(struct platform_device *pdev) * not, try the default value */ if (s3c2410wdt_set_heartbeat(tmr_margin)) { - started = s3c2410wdt_set_heartbeat(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); + started = s3c2410wdt_set_heartbeat( + CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); - if (started == 0) { - dev_info(dev,"tmr_margin value out of range, default %d used\n", + if (started == 0) + dev_info(dev, + "tmr_margin value out of range, default %d used\n", CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); - } else { + else dev_info(dev, "default timer value is out of range, cannot start\n"); - } } ret = misc_register(&s3c2410wdt_miscdev); @@ -447,7 +458,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) (wtcon & S3C2410_WTCON_ENABLE) ? "" : "in", (wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis", (wtcon & S3C2410_WTCON_INTEN) ? "" : "en"); - + return 0; err_clk: @@ -487,7 +498,7 @@ static int s3c2410wdt_remove(struct platform_device *dev) static void s3c2410wdt_shutdown(struct platform_device *dev) { - s3c2410wdt_stop(); + s3c2410wdt_stop(); } #ifdef CONFIG_PM @@ -540,7 +551,8 @@ static struct platform_driver s3c2410wdt_driver = { }; -static char banner[] __initdata = KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n"; +static char banner[] __initdata = + KERN_INFO "S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics\n"; static int __init watchdog_init(void) { -- GitLab From 9f2d1f0da766f84fdb96c9bd79ed0f97036635cb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:55:35 +0100 Subject: [PATCH 0756/1024] wdt: Cleanup and sort out locking and inb_p Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/watchdog/wdt.c | 176 ++++++++++++---------- drivers/watchdog/wdt_pci.c | 300 +++++++++++++++++++++---------------- 2 files changed, 265 insertions(+), 211 deletions(-) diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c index 756fb15fdce..53a6b18bcb9 100644 --- a/drivers/watchdog/wdt.c +++ b/drivers/watchdog/wdt.c @@ -24,9 +24,10 @@ * Matt Crocker). * Alan Cox : Added wdt= boot option * Alan Cox : Cleaned up copy/user stuff - * Tim Hockin : Added insmod parameters, comment cleanup - * Parameterized timeout - * Tigran Aivazian : Restructured wdt_init() to handle failures + * Tim Hockin : Added insmod parameters, comment + * cleanup, parameterized timeout + * Tigran Aivazian : Restructured wdt_init() to handle + * failures * Joel Becker : Added WDIOC_GET/SETTIMEOUT * Matt Domsch : Added nowayout module option */ @@ -42,9 +43,9 @@ #include #include #include +#include +#include -#include -#include #include #include "wd501p.h" @@ -60,15 +61,19 @@ static char expect_close; static int heartbeat = WD_TIMO; static int wd_heartbeat; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0 65535)) + if (t < 1 || t > 65535) return -EINVAL; heartbeat = t; @@ -200,7 +211,7 @@ static int wdt_get_status(int *status) new_status = inb_p(WDT_SR); spin_unlock_irqrestore(&wdt_lock, flags); - *status=0; + *status = 0; if (new_status & WDC_SR_ISOI0) *status |= WDIOF_EXTERN1; if (new_status & WDC_SR_ISII1) @@ -266,7 +277,7 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id) #ifdef CONFIG_WDT_501 if (!(status & WDC_SR_TGOOD)) - printk(KERN_CRIT "Overheat alarm.(%d)\n",inb_p(WDT_RT)); + printk(KERN_CRIT "Overheat alarm.(%d)\n", inb_p(WDT_RT)); if (!(status & WDC_SR_PSUOVER)) printk(KERN_CRIT "PSU over voltage.\n"); if (!(status & WDC_SR_PSUUNDR)) @@ -304,9 +315,10 @@ static irqreturn_t wdt_interrupt(int irq, void *dev_id) * write of data will do, as we we don't define content meaning. */ -static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { - if(count) { + if (count) { if (!nowayout) { size_t i; @@ -328,7 +340,6 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count /** * wdt_ioctl: - * @inode: inode of the device * @file: file handle to the device * @cmd: watchdog command * @arg: argument pointer @@ -338,8 +349,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, size_t count * querying capabilities and current status. */ -static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -362,32 +372,28 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, ident.options |= WDIOF_FANFAULT; #endif /* CONFIG_WDT_501 */ - switch(cmd) - { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - - case WDIOC_GETSTATUS: - wdt_get_status(&status); - return put_user(status, p); - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_ping(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_heartbeat, p)) - return -EFAULT; - - if (wdt_set_heartbeat(new_heartbeat)) - return -EINVAL; - - wdt_ping(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, p); + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + wdt_get_status(&status); + return put_user(status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdt_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_heartbeat)) + return -EINVAL; + wdt_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); } } @@ -405,7 +411,7 @@ static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, static int wdt_open(struct inode *inode, struct file *file) { - if(test_and_set_bit(0, &wdt_is_open)) + if (test_and_set_bit(0, &wdt_is_open)) return -EBUSY; /* * Activate @@ -432,7 +438,8 @@ static int wdt_release(struct inode *inode, struct file *file) wdt_stop(); clear_bit(0, &wdt_is_open); } else { - printk(KERN_CRIT "wdt: WDT device closed unexpectedly. WDT will not stop!\n"); + printk(KERN_CRIT + "wdt: WDT device closed unexpectedly. WDT will not stop!\n"); wdt_ping(); } expect_close = 0; @@ -451,14 +458,15 @@ static int wdt_release(struct inode *inode, struct file *file) * farenheit. It was designed by an imperial measurement luddite. */ -static ssize_t wdt_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr) +static ssize_t wdt_temp_read(struct file *file, char __user *buf, + size_t count, loff_t *ptr) { int temperature; if (wdt_get_temperature(&temperature)) return -EFAULT; - if (copy_to_user (buf, &temperature, 1)) + if (copy_to_user(buf, &temperature, 1)) return -EFAULT; return 1; @@ -506,10 +514,8 @@ static int wdt_temp_release(struct inode *inode, struct file *file) static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if(code==SYS_DOWN || code==SYS_HALT) { - /* Turn the card off */ + if (code == SYS_DOWN || code == SYS_HALT) wdt_stop(); - } return NOTIFY_DONE; } @@ -522,7 +528,7 @@ static const struct file_operations wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdt_write, - .ioctl = wdt_ioctl, + .unlocked_ioctl = wdt_ioctl, .open = wdt_open, .release = wdt_release, }; @@ -576,7 +582,7 @@ static void __exit wdt_exit(void) #endif /* CONFIG_WDT_501 */ unregister_reboot_notifier(&wdt_notifier); free_irq(irq, NULL); - release_region(io,8); + release_region(io, 8); } /** @@ -591,44 +597,49 @@ static int __init wdt_init(void) { int ret; - /* Check that the heartbeat value is within it's range ; if not reset to the default */ + /* Check that the heartbeat value is within it's range; + if not reset to the default */ if (wdt_set_heartbeat(heartbeat)) { wdt_set_heartbeat(WD_TIMO); - printk(KERN_INFO "wdt: heartbeat value must be 0 #include #include +#include +#include -#include -#include #include #define WDT_IS_PCI @@ -73,7 +75,7 @@ /* We can only use 1 card due to the /dev/watchdog restriction */ static int dev_count; -static struct semaphore open_sem; +static unsigned long open_lock; static DEFINE_SPINLOCK(wdtpci_lock); static char expect_close; @@ -86,18 +88,23 @@ static int irq; static int heartbeat = WD_TIMO; static int wd_heartbeat; module_param(heartbeat, int, 0); -MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (0>8, WDT_COUNT0+ctr); + outb(val & 0xFF, WDT_COUNT0 + ctr); + udelay(8); + outb(val >> 8, WDT_COUNT0 + ctr); + udelay(8); } /** @@ -134,23 +144,35 @@ static int wdtpci_start(void) * "pet" the watchdog, as Access says. * This resets the clock outputs. */ - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_mode(2,0); /* Program CTR2 for Mode 0: Pulse on Terminal Count */ - outb_p(0, WDT_DC); /* Enable watchdog */ - - inb_p(WDT_DC); /* Disable watchdog */ - outb_p(0, WDT_CLOCK); /* 2.0833MHz clock */ - inb_p(WDT_BUZZER); /* disable */ - inb_p(WDT_OPTONOTRST); /* disable */ - inb_p(WDT_OPTORST); /* disable */ - inb_p(WDT_PROGOUT); /* disable */ - wdtpci_ctr_mode(0,3); /* Program CTR0 for Mode 3: Square Wave Generator */ - wdtpci_ctr_mode(1,2); /* Program CTR1 for Mode 2: Rate Generator */ - wdtpci_ctr_mode(2,1); /* Program CTR2 for Mode 1: Retriggerable One-Shot */ - wdtpci_ctr_load(0,20833); /* count at 100Hz */ - wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_mode(2, 0); /* Program CTR2 for Mode 0: + Pulse on Terminal Count */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + outb(0, WDT_CLOCK); /* 2.0833MHz clock */ + udelay(8); + inb(WDT_BUZZER); /* disable */ + udelay(8); + inb(WDT_OPTONOTRST); /* disable */ + udelay(8); + inb(WDT_OPTORST); /* disable */ + udelay(8); + inb(WDT_PROGOUT); /* disable */ + udelay(8); + wdtpci_ctr_mode(0, 3); /* Program CTR0 for Mode 3: + Square Wave Generator */ + wdtpci_ctr_mode(1, 2); /* Program CTR1 for Mode 2: + Rate Generator */ + wdtpci_ctr_mode(2, 1); /* Program CTR2 for Mode 1: + Retriggerable One-Shot */ + wdtpci_ctr_load(0, 20833); /* count at 100Hz */ + wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */ /* DO NOT LOAD CTR2 on PCI card! -- JPN */ - outb_p(0, WDT_DC); /* Enable watchdog */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; @@ -162,14 +184,15 @@ static int wdtpci_start(void) * Stop the watchdog driver. */ -static int wdtpci_stop (void) +static int wdtpci_stop(void) { unsigned long flags; /* Turn the card off */ spin_lock_irqsave(&wdtpci_lock, flags); - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_load(2,0); /* 0 length reset pulses now */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_load(2, 0); /* 0 length reset pulses now */ spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; } @@ -177,20 +200,23 @@ static int wdtpci_stop (void) /** * wdtpci_ping: * - * Reload counter one with the watchdog heartbeat. We don't bother reloading - * the cascade counter. + * Reload counter one with the watchdog heartbeat. We don't bother + * reloading the cascade counter. */ static int wdtpci_ping(void) { unsigned long flags; - /* Write a watchdog value */ spin_lock_irqsave(&wdtpci_lock, flags); - inb_p(WDT_DC); /* Disable watchdog */ - wdtpci_ctr_mode(1,2); /* Re-Program CTR1 for Mode 2: Rate Generator */ - wdtpci_ctr_load(1,wd_heartbeat);/* Heartbeat */ - outb_p(0, WDT_DC); /* Enable watchdog */ + /* Write a watchdog value */ + inb(WDT_DC); /* Disable watchdog */ + udelay(8); + wdtpci_ctr_mode(1, 2); /* Re-Program CTR1 for Mode 2: + Rate Generator */ + wdtpci_ctr_load(1, wd_heartbeat);/* Heartbeat */ + outb(0, WDT_DC); /* Enable watchdog */ + udelay(8); spin_unlock_irqrestore(&wdtpci_lock, flags); return 0; } @@ -199,14 +225,14 @@ static int wdtpci_ping(void) * wdtpci_set_heartbeat: * @t: the new heartbeat value that needs to be set. * - * Set a new heartbeat value for the watchdog device. If the heartbeat value is - * incorrect we keep the old value and return -EINVAL. If successfull we - * return 0. + * Set a new heartbeat value for the watchdog device. If the heartbeat + * value is incorrect we keep the old value and return -EINVAL. + * If successful we return 0. */ static int wdtpci_set_heartbeat(int t) { /* Arbitrary, can't find the card's limits */ - if ((t < 1) || (t > 65535)) + if (t < 1 || t > 65535) return -EINVAL; heartbeat = t; @@ -227,9 +253,14 @@ static int wdtpci_set_heartbeat(int t) static int wdtpci_get_status(int *status) { - unsigned char new_status=inb_p(WDT_SR); + unsigned char new_status; + unsigned long flags; + + spin_lock_irqsave(&wdtpci_lock, flags); + new_status = inb(WDT_SR); + spin_unlock_irqrestore(&wdtpci_lock, flags); - *status=0; + *status = 0; if (new_status & WDC_SR_ISOI0) *status |= WDIOF_EXTERN1; if (new_status & WDC_SR_ISII1) @@ -259,8 +290,12 @@ static int wdtpci_get_status(int *status) static int wdtpci_get_temperature(int *temperature) { - unsigned short c=inb_p(WDT_RT); - + unsigned short c; + unsigned long flags; + spin_lock_irqsave(&wdtpci_lock, flags); + c = inb(WDT_RT); + udelay(8); + spin_unlock_irqrestore(&wdtpci_lock, flags); *temperature = (c * 11 / 15) + 7; return 0; } @@ -282,17 +317,25 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) * Read the status register see what is up and * then printk it. */ - unsigned char status=inb_p(WDT_SR); + unsigned char status; + + spin_lock(&wdtpci_lock); + + status = inb(WDT_SR); + udelay(8); printk(KERN_CRIT PFX "status %d\n", status); #ifdef CONFIG_WDT_501_PCI - if (!(status & WDC_SR_TGOOD)) - printk(KERN_CRIT PFX "Overheat alarm.(%d)\n",inb_p(WDT_RT)); + if (!(status & WDC_SR_TGOOD)) { + u8 alarm = inb(WDT_RT); + printk(KERN_CRIT PFX "Overheat alarm.(%d)\n", alarm); + udelay(8); + } if (!(status & WDC_SR_PSUOVER)) - printk(KERN_CRIT PFX "PSU over voltage.\n"); + printk(KERN_CRIT PFX "PSU over voltage.\n"); if (!(status & WDC_SR_PSUUNDR)) - printk(KERN_CRIT PFX "PSU under voltage.\n"); + printk(KERN_CRIT PFX "PSU under voltage.\n"); if (tachometer) { if (!(status & WDC_SR_FANGOOD)) printk(KERN_CRIT PFX "Possible fan fault.\n"); @@ -310,6 +353,7 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) printk(KERN_CRIT PFX "Reset in 5ms.\n"); #endif } + spin_unlock(&wdtpci_lock); return IRQ_HANDLED; } @@ -325,7 +369,8 @@ static irqreturn_t wdtpci_interrupt(int irq, void *dev_id) * write of data will do, as we we don't define content meaning. */ -static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +static ssize_t wdtpci_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) { if (count) { if (!nowayout) { @@ -335,7 +380,7 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co for (i = 0; i != count; i++) { char c; - if(get_user(c, buf+i)) + if (get_user(c, buf+i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -343,13 +388,11 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co } wdtpci_ping(); } - return count; } /** * wdtpci_ioctl: - * @inode: inode of the device * @file: file handle to the device * @cmd: watchdog command * @arg: argument pointer @@ -359,8 +402,8 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, size_t co * querying capabilities and current status. */ -static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static long wdtpci_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_heartbeat; int status; @@ -383,33 +426,29 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd ident.options |= WDIOF_FANFAULT; #endif /* CONFIG_WDT_501_PCI */ - switch(cmd) - { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))?-EFAULT:0; - - case WDIOC_GETSTATUS: - wdtpci_get_status(&status); - return put_user(status, p); - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_KEEPALIVE: - wdtpci_ping(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_heartbeat, p)) - return -EFAULT; - - if (wdtpci_set_heartbeat(new_heartbeat)) - return -EINVAL; - - wdtpci_ping(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, p); - } + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; + case WDIOC_GETSTATUS: + wdtpci_get_status(&status); + return put_user(status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + case WDIOC_KEEPALIVE: + wdtpci_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, p)) + return -EFAULT; + if (wdtpci_set_heartbeat(new_heartbeat)) + return -EINVAL; + wdtpci_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); + } } /** @@ -426,12 +465,11 @@ static int wdtpci_ioctl(struct inode *inode, struct file *file, unsigned int cmd static int wdtpci_open(struct inode *inode, struct file *file) { - if (down_trylock(&open_sem)) + if (test_and_set_bit(0, &open_lock)) return -EBUSY; - if (nowayout) { + if (nowayout) __module_get(THIS_MODULE); - } /* * Activate */ @@ -460,7 +498,7 @@ static int wdtpci_release(struct inode *inode, struct file *file) wdtpci_ping(); } expect_close = 0; - up(&open_sem); + clear_bit(0, &open_lock); return 0; } @@ -476,14 +514,15 @@ static int wdtpci_release(struct inode *inode, struct file *file) * fahrenheit. It was designed by an imperial measurement luddite. */ -static ssize_t wdtpci_temp_read(struct file *file, char __user *buf, size_t count, loff_t *ptr) +static ssize_t wdtpci_temp_read(struct file *file, char __user *buf, + size_t count, loff_t *ptr) { int temperature; if (wdtpci_get_temperature(&temperature)) return -EFAULT; - if (copy_to_user (buf, &temperature, 1)) + if (copy_to_user(buf, &temperature, 1)) return -EFAULT; return 1; @@ -529,12 +568,10 @@ static int wdtpci_temp_release(struct inode *inode, struct file *file) */ static int wdtpci_notify_sys(struct notifier_block *this, unsigned long code, - void *unused) + void *unused) { - if (code==SYS_DOWN || code==SYS_HALT) { - /* Turn the card off */ + if (code == SYS_DOWN || code == SYS_HALT) wdtpci_stop(); - } return NOTIFY_DONE; } @@ -547,7 +584,7 @@ static const struct file_operations wdtpci_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = wdtpci_write, - .ioctl = wdtpci_ioctl, + .unlocked_ioctl = wdtpci_ioctl, .open = wdtpci_open, .release = wdtpci_release, }; @@ -584,80 +621,85 @@ static struct notifier_block wdtpci_notifier = { }; -static int __devinit wdtpci_init_one (struct pci_dev *dev, - const struct pci_device_id *ent) +static int __devinit wdtpci_init_one(struct pci_dev *dev, + const struct pci_device_id *ent) { int ret = -EIO; dev_count++; if (dev_count > 1) { - printk (KERN_ERR PFX "this driver only supports 1 device\n"); + printk(KERN_ERR PFX "This driver only supports one device\n"); return -ENODEV; } - if (pci_enable_device (dev)) { - printk (KERN_ERR PFX "Not possible to enable PCI Device\n"); + if (pci_enable_device(dev)) { + printk(KERN_ERR PFX "Not possible to enable PCI Device\n"); return -ENODEV; } - if (pci_resource_start (dev, 2) == 0x0000) { - printk (KERN_ERR PFX "No I/O-Address for card detected\n"); + if (pci_resource_start(dev, 2) == 0x0000) { + printk(KERN_ERR PFX "No I/O-Address for card detected\n"); ret = -ENODEV; goto out_pci; } - sema_init(&open_sem, 1); - irq = dev->irq; - io = pci_resource_start (dev, 2); + io = pci_resource_start(dev, 2); - if (request_region (io, 16, "wdt_pci") == NULL) { - printk (KERN_ERR PFX "I/O address 0x%04x already in use\n", io); + if (request_region(io, 16, "wdt_pci") == NULL) { + printk(KERN_ERR PFX "I/O address 0x%04x already in use\n", io); goto out_pci; } - if (request_irq (irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED, + if (request_irq(irq, wdtpci_interrupt, IRQF_DISABLED | IRQF_SHARED, "wdt_pci", &wdtpci_miscdev)) { - printk (KERN_ERR PFX "IRQ %d is not free\n", irq); + printk(KERN_ERR PFX "IRQ %d is not free\n", irq); goto out_reg; } - printk ("PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n", - io, irq); + printk(KERN_INFO + "PCI-WDT500/501 (PCI-WDG-CSM) driver 0.10 at 0x%04x (Interrupt %d)\n", + io, irq); - /* Check that the heartbeat value is within it's range ; if not reset to the default */ + /* Check that the heartbeat value is within its range; + if not reset to the default */ if (wdtpci_set_heartbeat(heartbeat)) { wdtpci_set_heartbeat(WD_TIMO); - printk(KERN_INFO PFX "heartbeat value must be 0 Date: Mon, 4 Aug 2008 17:56:02 +0100 Subject: [PATCH 0757/1024] alpha: Fix breakage in wdt_pci drivers/watchdog/wdt_pci.c: In function 'wdtpci_ctr_mode': drivers/watchdog/wdt_pci.c:120: error: implicit declaration of function 'udelay' {standard input}: Assembler messages: Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/watchdog/wdt_pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c index 078f37f8038..5d922fd6eaf 100644 --- a/drivers/watchdog/wdt_pci.c +++ b/drivers/watchdog/wdt_pci.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #include #include -- GitLab From 103a1d5c57fac3623613b130b104f5b03367b31c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 4 Aug 2008 17:56:28 +0100 Subject: [PATCH 0758/1024] sc1200 watchdog driver: Fix locking, sems and coding style Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/watchdog/sc1200wdt.c | 205 +++++++++++++++++++---------------- 1 file changed, 113 insertions(+), 92 deletions(-) diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index 35cddff7020..621ebad56d8 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -15,14 +15,18 @@ * * Changelog: * 20020220 Zwane Mwaikambo Code based on datasheet, no hardware. - * 20020221 Zwane Mwaikambo Cleanups as suggested by Jeff Garzik and Alan Cox. + * 20020221 Zwane Mwaikambo Cleanups as suggested by Jeff Garzik + * and Alan Cox. * 20020222 Zwane Mwaikambo Added probing. * 20020225 Zwane Mwaikambo Added ISAPNP support. * 20020412 Rob Radez Broke out start/stop functions - * Return proper status instead of temperature warning - * Add WDIOC_GETBOOTSTATUS and WDIOC_SETOPTIONS ioctls + * Return proper status instead of + * temperature warning + * Add WDIOC_GETBOOTSTATUS and + * WDIOC_SETOPTIONS ioctls * Fix CONFIG_WATCHDOG_NOWAYOUT - * 20020530 Joel Becker Add Matt Domsch's nowayout module option + * 20020530 Joel Becker Add Matt Domsch's nowayout module + * option * 20030116 Adam Belay Updated to the latest pnp code * */ @@ -39,9 +43,8 @@ #include #include #include - -#include -#include +#include +#include #define SC1200_MODULE_VER "build 20020303" #define SC1200_MODULE_NAME "sc1200wdt" @@ -72,7 +75,7 @@ static char banner[] __initdata = KERN_INFO PFX SC1200_MODULE_VER; static int timeout = 1; static int io = -1; static int io_len = 2; /* for non plug and play */ -static struct semaphore open_sem; +static unsigned long open_flag; static char expect_close; static DEFINE_SPINLOCK(sc1200wdt_lock); /* io port access serialisation */ @@ -81,7 +84,8 @@ static int isapnp = 1; static struct pnp_dev *wdt_dev; module_param(isapnp, int, 0); -MODULE_PARM_DESC(isapnp, "When set to 0 driver ISA PnP support will be disabled"); +MODULE_PARM_DESC(isapnp, + "When set to 0 driver ISA PnP support will be disabled"); #endif module_param(io, int, 0); @@ -91,26 +95,40 @@ MODULE_PARM_DESC(timeout, "range is 0-255 minutes, default is 1"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* Read from Data Register */ -static inline void sc1200wdt_read_data(unsigned char index, unsigned char *data) +static inline void __sc1200wdt_read_data(unsigned char index, + unsigned char *data) { - spin_lock(&sc1200wdt_lock); outb_p(index, PMIR); *data = inb(PMDR); - spin_unlock(&sc1200wdt_lock); } +static void sc1200wdt_read_data(unsigned char index, unsigned char *data) +{ + spin_lock(&sc1200wdt_lock); + __sc1200wdt_read_data(index, data); + spin_unlock(&sc1200wdt_lock); +} /* Write to Data Register */ -static inline void sc1200wdt_write_data(unsigned char index, unsigned char data) +static inline void __sc1200wdt_write_data(unsigned char index, + unsigned char data) { - spin_lock(&sc1200wdt_lock); outb_p(index, PMIR); outb(data, PMDR); +} + +static inline void sc1200wdt_write_data(unsigned char index, + unsigned char data) +{ + spin_lock(&sc1200wdt_lock); + __sc1200wdt_write_data(index, data); spin_unlock(&sc1200wdt_lock); } @@ -118,22 +136,23 @@ static inline void sc1200wdt_write_data(unsigned char index, unsigned char data) static void sc1200wdt_start(void) { unsigned char reg; + spin_lock(&sc1200wdt_lock); - sc1200wdt_read_data(WDCF, ®); + __sc1200wdt_read_data(WDCF, ®); /* assert WDO when any of the following interrupts are triggered too */ reg |= (KBC_IRQ | MSE_IRQ | UART1_IRQ | UART2_IRQ); - sc1200wdt_write_data(WDCF, reg); + __sc1200wdt_write_data(WDCF, reg); /* set the timeout and get the ball rolling */ - sc1200wdt_write_data(WDTO, timeout); -} + __sc1200wdt_write_data(WDTO, timeout); + spin_unlock(&sc1200wdt_lock); +} static void sc1200wdt_stop(void) { sc1200wdt_write_data(WDTO, 0); } - /* This returns the status of the WDO signal, inactive high. */ static inline int sc1200wdt_status(void) { @@ -144,14 +163,13 @@ static inline int sc1200wdt_status(void) * KEEPALIVEPING which is a bit of a kludge because there's nothing * else for enabled/disabled status */ - return (ret & 0x01) ? 0 : WDIOF_KEEPALIVEPING; /* bits 1 - 7 are undefined */ + return (ret & 0x01) ? 0 : WDIOF_KEEPALIVEPING; } - static int sc1200wdt_open(struct inode *inode, struct file *file) { /* allow one at a time */ - if (down_trylock(&open_sem)) + if (test_and_set_bit(0, &open_flag)) return -EBUSY; if (timeout > MAX_TIMEOUT) @@ -164,71 +182,71 @@ static int sc1200wdt_open(struct inode *inode, struct file *file) } -static int sc1200wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long sc1200wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int new_timeout; void __user *argp = (void __user *)arg; int __user *p = argp; - static struct watchdog_info ident = { - .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + static const struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, .firmware_version = 0, .identity = "PC87307/PC97307", }; switch (cmd) { - default: - return -ENOTTY; - - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof ident)) - return -EFAULT; - return 0; - - case WDIOC_GETSTATUS: - return put_user(sc1200wdt_status(), p); - - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_KEEPALIVE: - sc1200wdt_write_data(WDTO, timeout); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof ident)) + return -EFAULT; + return 0; - /* the API states this is given in secs */ - new_timeout /= 60; - if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) - return -EINVAL; + case WDIOC_GETSTATUS: + return put_user(sc1200wdt_status(), p); - timeout = new_timeout; - sc1200wdt_write_data(WDTO, timeout); - /* fall through and return the new timeout */ + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); - case WDIOC_GETTIMEOUT: - return put_user(timeout * 60, p); + case WDIOC_KEEPALIVE: + sc1200wdt_write_data(WDTO, timeout); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + /* the API states this is given in secs */ + new_timeout /= 60; + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + timeout = new_timeout; + sc1200wdt_write_data(WDTO, timeout); + /* fall through and return the new timeout */ - case WDIOC_SETOPTIONS: - { - int options, retval = -EINVAL; + case WDIOC_GETTIMEOUT: + return put_user(timeout * 60, p); - if (get_user(options, p)) - return -EFAULT; + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; - if (options & WDIOS_DISABLECARD) { - sc1200wdt_stop(); - retval = 0; - } + if (get_user(options, p)) + return -EFAULT; - if (options & WDIOS_ENABLECARD) { - sc1200wdt_start(); - retval = 0; - } + if (options & WDIOS_DISABLECARD) { + sc1200wdt_stop(); + retval = 0; + } - return retval; + if (options & WDIOS_ENABLECARD) { + sc1200wdt_start(); + retval = 0; } + + return retval; + } + default: + return -ENOTTY; } } @@ -240,16 +258,18 @@ static int sc1200wdt_release(struct inode *inode, struct file *file) printk(KERN_INFO PFX "Watchdog disabled\n"); } else { sc1200wdt_write_data(WDTO, timeout); - printk(KERN_CRIT PFX "Unexpected close!, timeout = %d min(s)\n", timeout); + printk(KERN_CRIT PFX + "Unexpected close!, timeout = %d min(s)\n", timeout); } - up(&open_sem); + clear_bit(0, &open_flag); expect_close = 0; return 0; } -static ssize_t sc1200wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) +static ssize_t sc1200wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { if (len) { if (!nowayout) { @@ -275,7 +295,8 @@ static ssize_t sc1200wdt_write(struct file *file, const char __user *data, size_ } -static int sc1200wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +static int sc1200wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) { if (code == SYS_DOWN || code == SYS_HALT) sc1200wdt_stop(); @@ -284,23 +305,20 @@ static int sc1200wdt_notify_sys(struct notifier_block *this, unsigned long code, } -static struct notifier_block sc1200wdt_notifier = -{ +static struct notifier_block sc1200wdt_notifier = { .notifier_call = sc1200wdt_notify_sys, }; -static const struct file_operations sc1200wdt_fops = -{ +static const struct file_operations sc1200wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = sc1200wdt_write, - .ioctl = sc1200wdt_ioctl, + .unlocked_ioctl = sc1200wdt_ioctl, .open = sc1200wdt_open, .release = sc1200wdt_release, }; -static struct miscdevice sc1200wdt_miscdev = -{ +static struct miscdevice sc1200wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &sc1200wdt_fops, @@ -312,14 +330,14 @@ static int __init sc1200wdt_probe(void) /* The probe works by reading the PMC3 register's default value of 0x0e * there is one caveat, if the device disables the parallel port or any * of the UARTs we won't be able to detect it. - * Nb. This could be done with accuracy by reading the SID registers, but - * we don't have access to those io regions. + * NB. This could be done with accuracy by reading the SID registers, + * but we don't have access to those io regions. */ unsigned char reg; sc1200wdt_read_data(PMC3, ®); - reg &= 0x0f; /* we don't want the UART busy bits */ + reg &= 0x0f; /* we don't want the UART busy bits */ return (reg == 0x0e) ? 0 : -ENODEV; } @@ -332,7 +350,8 @@ static struct pnp_device_id scl200wdt_pnp_devices[] = { {.id = ""}, }; -static int scl200wdt_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id) +static int scl200wdt_pnp_probe(struct pnp_dev *dev, + const struct pnp_device_id *dev_id) { /* this driver only supports one card at a time */ if (wdt_dev || !isapnp) @@ -347,13 +366,14 @@ static int scl200wdt_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id return -EBUSY; } - printk(KERN_INFO "scl200wdt: PnP device found at io port %#x/%d\n", io, io_len); + printk(KERN_INFO "scl200wdt: PnP device found at io port %#x/%d\n", + io, io_len); return 0; } -static void scl200wdt_pnp_remove(struct pnp_dev * dev) +static void scl200wdt_pnp_remove(struct pnp_dev *dev) { - if (wdt_dev){ + if (wdt_dev) { release_region(io, io_len); wdt_dev = NULL; } @@ -375,8 +395,6 @@ static int __init sc1200wdt_init(void) printk("%s\n", banner); - sema_init(&open_sem, 1); - #if defined CONFIG_PNP if (isapnp) { ret = pnp_register_driver(&scl200wdt_pnp_driver); @@ -410,13 +428,16 @@ static int __init sc1200wdt_init(void) ret = register_reboot_notifier(&sc1200wdt_notifier); if (ret) { - printk(KERN_ERR PFX "Unable to register reboot notifier err = %d\n", ret); + printk(KERN_ERR PFX + "Unable to register reboot notifier err = %d\n", ret); goto out_io; } ret = misc_register(&sc1200wdt_miscdev); if (ret) { - printk(KERN_ERR PFX "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR); + printk(KERN_ERR PFX + "Unable to register miscdev on minor %d\n", + WATCHDOG_MINOR); goto out_rbt; } @@ -446,7 +467,7 @@ static void __exit sc1200wdt_exit(void) unregister_reboot_notifier(&sc1200wdt_notifier); #if defined CONFIG_PNP - if(isapnp) + if (isapnp) pnp_unregister_driver(&scl200wdt_pnp_driver); else #endif -- GitLab From 725aad24c3ba96a7c06448c14c265a466cdbd663 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sun, 3 Aug 2008 09:33:03 -0700 Subject: [PATCH 0759/1024] __sched_setscheduler: don't do any policy checks when not "user" The "user" parameter to __sched_setscheduler indicates whether the change is being done on behalf of a user process or not. If not, we shouldn't apply any permissions checks, so don't call security_task_setscheduler(). Signed-off-by: Jeremy Fitzhardinge Tested-by: Steve Wise Cc: Rusty Russell Cc: "Rafael J. Wysocki" Signed-off-by: Linus Torvalds --- kernel/sched.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 21f7da94662..04160d277e7 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5004,19 +5004,21 @@ recheck: return -EPERM; } + if (user) { #ifdef CONFIG_RT_GROUP_SCHED - /* - * Do not allow realtime tasks into groups that have no runtime - * assigned. - */ - if (user - && rt_policy(policy) && task_group(p)->rt_bandwidth.rt_runtime == 0) - return -EPERM; + /* + * Do not allow realtime tasks into groups that have no runtime + * assigned. + */ + if (rt_policy(policy) && task_group(p)->rt_bandwidth.rt_runtime == 0) + return -EPERM; #endif - retval = security_task_setscheduler(p, policy, param); - if (retval) - return retval; + retval = security_task_setscheduler(p, policy, param); + if (retval) + return retval; + } + /* * make sure no PI-waiters arrive (or leave) while we are * changing the priority of the task: -- GitLab From 7274264f60cc0b71389efed286001ff0860c3141 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Sun, 3 Aug 2008 22:02:10 +0200 Subject: [PATCH 0760/1024] m68k: some asm-sparc include files moved So copy their contents into the asm-m68k files. Signed-off-by: Stephen Rothwell Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- include/asm-m68k/contregs.h | 51 +++++- include/asm-m68k/fbio.h | 331 +++++++++++++++++++++++++++++++++++- include/asm-m68k/idprom.h | 21 ++- 3 files changed, 400 insertions(+), 3 deletions(-) diff --git a/include/asm-m68k/contregs.h b/include/asm-m68k/contregs.h index 1e233e7d191..d1ea750bddf 100644 --- a/include/asm-m68k/contregs.h +++ b/include/asm-m68k/contregs.h @@ -1,4 +1,53 @@ #ifndef _M68K_CONTREGS_H #define _M68K_CONTREGS_H -#include + +/* contregs.h: Addresses of registers in the ASI_CONTROL alternate address + * space. These are for the mmu's context register, etc. + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + */ + +/* 3=sun3 + 4=sun4 (as in sun4 sysmaint student book) + c=sun4c (according to davem) */ + +#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */ +#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */ +#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */ +#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */ +#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/ +#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */ +#define AC_BUS_ERROR 0x60000000 /* 34 Not cleared on read, byte. */ +#define AC_SYNC_ERR 0x60000000 /* c fault type */ +#define AC_SYNC_VA 0x60000004 /* c fault virtual address */ +#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */ +#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */ +#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */ +#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */ +#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */ +#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */ +#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */ +#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/ + +/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress */ +#define AC_M_PCR 0x0000 /* shv Processor Control Reg */ +#define AC_M_CTPR 0x0100 /* shv Context Table Pointer Reg */ +#define AC_M_CXR 0x0200 /* shv Context Register */ +#define AC_M_SFSR 0x0300 /* shv Synchronous Fault Status Reg */ +#define AC_M_SFAR 0x0400 /* shv Synchronous Fault Address Reg */ +#define AC_M_AFSR 0x0500 /* hv Asynchronous Fault Status Reg */ +#define AC_M_AFAR 0x0600 /* hv Asynchronous Fault Address Reg */ +#define AC_M_RESET 0x0700 /* hv Reset Reg */ +#define AC_M_RPR 0x1000 /* hv Root Pointer Reg */ +#define AC_M_TSUTRCR 0x1000 /* s TLB Replacement Ctrl Reg */ +#define AC_M_IAPTP 0x1100 /* hv Instruction Access PTP */ +#define AC_M_DAPTP 0x1200 /* hv Data Access PTP */ +#define AC_M_ITR 0x1300 /* hv Index Tag Register */ +#define AC_M_TRCR 0x1400 /* hv TLB Replacement Control Reg */ +#define AC_M_SFSRX 0x1300 /* s Synch Fault Status Reg prim */ +#define AC_M_SFARX 0x1400 /* s Synch Fault Address Reg prim */ +#define AC_M_RPR1 0x1500 /* h Root Pointer Reg (entry 2) */ +#define AC_M_IAPTP1 0x1600 /* h Instruction Access PTP (entry 2) */ +#define AC_M_DAPTP1 0x1700 /* h Data Access PTP (entry 2) */ + #endif /* _M68K_CONTREGS_H */ diff --git a/include/asm-m68k/fbio.h b/include/asm-m68k/fbio.h index c17edf8c7bc..b9215a0907d 100644 --- a/include/asm-m68k/fbio.h +++ b/include/asm-m68k/fbio.h @@ -1 +1,330 @@ -#include +#ifndef __LINUX_FBIO_H +#define __LINUX_FBIO_H + +#include +#include + +/* Constants used for fbio SunOS compatibility */ +/* (C) 1996 Miguel de Icaza */ + +/* Frame buffer types */ +#define FBTYPE_NOTYPE -1 +#define FBTYPE_SUN1BW 0 /* mono */ +#define FBTYPE_SUN1COLOR 1 +#define FBTYPE_SUN2BW 2 +#define FBTYPE_SUN2COLOR 3 +#define FBTYPE_SUN2GP 4 +#define FBTYPE_SUN5COLOR 5 +#define FBTYPE_SUN3COLOR 6 +#define FBTYPE_MEMCOLOR 7 +#define FBTYPE_SUN4COLOR 8 + +#define FBTYPE_NOTSUN1 9 +#define FBTYPE_NOTSUN2 10 +#define FBTYPE_NOTSUN3 11 + +#define FBTYPE_SUNFAST_COLOR 12 /* cg6 */ +#define FBTYPE_SUNROP_COLOR 13 +#define FBTYPE_SUNFB_VIDEO 14 +#define FBTYPE_SUNGIFB 15 +#define FBTYPE_SUNGPLAS 16 +#define FBTYPE_SUNGP3 17 +#define FBTYPE_SUNGT 18 +#define FBTYPE_SUNLEO 19 /* zx Leo card */ +#define FBTYPE_MDICOLOR 20 /* cg14 */ +#define FBTYPE_TCXCOLOR 21 /* SUNW,tcx card */ + +#define FBTYPE_LASTPLUSONE 21 /* This is not last + 1 in fact... */ + +/* Does not seem to be listed in the Sun file either */ +#define FBTYPE_CREATOR 22 +#define FBTYPE_PCI_IGA1682 23 +#define FBTYPE_P9100COLOR 24 + +#define FBTYPE_PCI_GENERIC 1000 +#define FBTYPE_PCI_MACH64 1001 + +/* fbio ioctls */ +/* Returned by FBIOGTYPE */ +struct fbtype { + int fb_type; /* fb type, see above */ + int fb_height; /* pixels */ + int fb_width; /* pixels */ + int fb_depth; + int fb_cmsize; /* color map entries */ + int fb_size; /* fb size in bytes */ +}; +#define FBIOGTYPE _IOR('F', 0, struct fbtype) + +struct fbcmap { + int index; /* first element (0 origin) */ + int count; + unsigned char __user *red; + unsigned char __user *green; + unsigned char __user *blue; +}; + +#ifdef __KERNEL__ +#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap) +#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap) +#else +#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap) +#define FBIOGETCMAP _IOW('F', 4, struct fbcmap) +#endif + +/* # of device specific values */ +#define FB_ATTR_NDEVSPECIFIC 8 +/* # of possible emulations */ +#define FB_ATTR_NEMUTYPES 4 + +struct fbsattr { + int flags; + int emu_type; /* -1 if none */ + int dev_specific[FB_ATTR_NDEVSPECIFIC]; +}; + +struct fbgattr { + int real_type; /* real frame buffer type */ + int owner; /* unknown */ + struct fbtype fbtype; /* real frame buffer fbtype */ + struct fbsattr sattr; + int emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */ +}; +#define FBIOSATTR _IOW('F', 5, struct fbgattr) /* Unsupported: */ +#define FBIOGATTR _IOR('F', 6, struct fbgattr) /* supported */ + +#define FBIOSVIDEO _IOW('F', 7, int) +#define FBIOGVIDEO _IOR('F', 8, int) + +struct fbcursor { + short set; /* what to set, choose from the list above */ + short enable; /* cursor on/off */ + struct fbcurpos pos; /* cursor position */ + struct fbcurpos hot; /* cursor hot spot */ + struct fbcmap cmap; /* color map info */ + struct fbcurpos size; /* cursor bit map size */ + char __user *image; /* cursor image bits */ + char __user *mask; /* cursor mask bits */ +}; + +/* set/get cursor attributes/shape */ +#define FBIOSCURSOR _IOW('F', 24, struct fbcursor) +#define FBIOGCURSOR _IOWR('F', 25, struct fbcursor) + +/* set/get cursor position */ +#define FBIOSCURPOS _IOW('F', 26, struct fbcurpos) +#define FBIOGCURPOS _IOW('F', 27, struct fbcurpos) + +/* get max cursor size */ +#define FBIOGCURMAX _IOR('F', 28, struct fbcurpos) + +/* wid manipulation */ +struct fb_wid_alloc { +#define FB_WID_SHARED_8 0 +#define FB_WID_SHARED_24 1 +#define FB_WID_DBL_8 2 +#define FB_WID_DBL_24 3 + __u32 wa_type; + __s32 wa_index; /* Set on return */ + __u32 wa_count; +}; +struct fb_wid_item { + __u32 wi_type; + __s32 wi_index; + __u32 wi_attrs; + __u32 wi_values[32]; +}; +struct fb_wid_list { + __u32 wl_flags; + __u32 wl_count; + struct fb_wid_item *wl_list; +}; + +#define FBIO_WID_ALLOC _IOWR('F', 30, struct fb_wid_alloc) +#define FBIO_WID_FREE _IOW('F', 31, struct fb_wid_alloc) +#define FBIO_WID_PUT _IOW('F', 32, struct fb_wid_list) +#define FBIO_WID_GET _IOWR('F', 33, struct fb_wid_list) + +/* Creator ioctls */ +#define FFB_IOCTL ('F'<<8) +#define FFB_SYS_INFO (FFB_IOCTL|80) +#define FFB_CLUTREAD (FFB_IOCTL|81) +#define FFB_CLUTPOST (FFB_IOCTL|82) +#define FFB_SETDIAGMODE (FFB_IOCTL|83) +#define FFB_GETMONITORID (FFB_IOCTL|84) +#define FFB_GETVIDEOMODE (FFB_IOCTL|85) +#define FFB_SETVIDEOMODE (FFB_IOCTL|86) +#define FFB_SETSERVER (FFB_IOCTL|87) +#define FFB_SETOVCTL (FFB_IOCTL|88) +#define FFB_GETOVCTL (FFB_IOCTL|89) +#define FFB_GETSAXNUM (FFB_IOCTL|90) +#define FFB_FBDEBUG (FFB_IOCTL|91) + +/* Cg14 ioctls */ +#define MDI_IOCTL ('M'<<8) +#define MDI_RESET (MDI_IOCTL|1) +#define MDI_GET_CFGINFO (MDI_IOCTL|2) +#define MDI_SET_PIXELMODE (MDI_IOCTL|3) +# define MDI_32_PIX 32 +# define MDI_16_PIX 16 +# define MDI_8_PIX 8 + +struct mdi_cfginfo { + int mdi_ncluts; /* Number of implemented CLUTs in this MDI */ + int mdi_type; /* FBTYPE name */ + int mdi_height; /* height */ + int mdi_width; /* widht */ + int mdi_size; /* available ram */ + int mdi_mode; /* 8bpp, 16bpp or 32bpp */ + int mdi_pixfreq; /* pixel clock (from PROM) */ +}; + +/* SparcLinux specific ioctl for the MDI, should be replaced for + * the SET_XLUT/SET_CLUTn ioctls instead + */ +#define MDI_CLEAR_XLUT (MDI_IOCTL|9) + +/* leo & ffb ioctls */ +struct fb_clut_alloc { + __u32 clutid; /* Set on return */ + __u32 flag; + __u32 index; +}; + +struct fb_clut { +#define FB_CLUT_WAIT 0x00000001 /* Not yet implemented */ + __u32 flag; + __u32 clutid; + __u32 offset; + __u32 count; + char * red; + char * green; + char * blue; +}; + +struct fb_clut32 { + __u32 flag; + __u32 clutid; + __u32 offset; + __u32 count; + __u32 red; + __u32 green; + __u32 blue; +}; + +#define LEO_CLUTALLOC _IOWR('L', 53, struct fb_clut_alloc) +#define LEO_CLUTFREE _IOW('L', 54, struct fb_clut_alloc) +#define LEO_CLUTREAD _IOW('L', 55, struct fb_clut) +#define LEO_CLUTPOST _IOW('L', 56, struct fb_clut) +#define LEO_SETGAMMA _IOW('L', 68, int) /* Not yet implemented */ +#define LEO_GETGAMMA _IOR('L', 69, int) /* Not yet implemented */ + +#ifdef __KERNEL__ +/* Addresses on the fd of a cgsix that are mappable */ +#define CG6_FBC 0x70000000 +#define CG6_TEC 0x70001000 +#define CG6_BTREGS 0x70002000 +#define CG6_FHC 0x70004000 +#define CG6_THC 0x70005000 +#define CG6_ROM 0x70006000 +#define CG6_RAM 0x70016000 +#define CG6_DHC 0x80000000 + +#define CG3_MMAP_OFFSET 0x4000000 + +/* Addresses on the fd of a tcx that are mappable */ +#define TCX_RAM8BIT 0x00000000 +#define TCX_RAM24BIT 0x01000000 +#define TCX_UNK3 0x10000000 +#define TCX_UNK4 0x20000000 +#define TCX_CONTROLPLANE 0x28000000 +#define TCX_UNK6 0x30000000 +#define TCX_UNK7 0x38000000 +#define TCX_TEC 0x70000000 +#define TCX_BTREGS 0x70002000 +#define TCX_THC 0x70004000 +#define TCX_DHC 0x70008000 +#define TCX_ALT 0x7000a000 +#define TCX_SYNC 0x7000e000 +#define TCX_UNK2 0x70010000 + +/* CG14 definitions */ + +/* Offsets into the OBIO space: */ +#define CG14_REGS 0 /* registers */ +#define CG14_CURSORREGS 0x1000 /* cursor registers */ +#define CG14_DACREGS 0x2000 /* DAC registers */ +#define CG14_XLUT 0x3000 /* X Look Up Table -- ??? */ +#define CG14_CLUT1 0x4000 /* Color Look Up Table */ +#define CG14_CLUT2 0x5000 /* Color Look Up Table */ +#define CG14_CLUT3 0x6000 /* Color Look Up Table */ +#define CG14_AUTO 0xf000 + +#endif /* KERNEL */ + +/* These are exported to userland for applications to use */ +/* Mappable offsets for the cg14: control registers */ +#define MDI_DIRECT_MAP 0x10000000 +#define MDI_CTLREG_MAP 0x20000000 +#define MDI_CURSOR_MAP 0x30000000 +#define MDI_SHDW_VRT_MAP 0x40000000 + +/* Mappable offsets for the cg14: frame buffer resolutions */ +/* 32 bits */ +#define MDI_CHUNKY_XBGR_MAP 0x50000000 +#define MDI_CHUNKY_BGR_MAP 0x60000000 + +/* 16 bits */ +#define MDI_PLANAR_X16_MAP 0x70000000 +#define MDI_PLANAR_C16_MAP 0x80000000 + +/* 8 bit is done as CG3 MMAP offset */ +/* 32 bits, planar */ +#define MDI_PLANAR_X32_MAP 0x90000000 +#define MDI_PLANAR_B32_MAP 0xa0000000 +#define MDI_PLANAR_G32_MAP 0xb0000000 +#define MDI_PLANAR_R32_MAP 0xc0000000 + +/* Mappable offsets on leo */ +#define LEO_SS0_MAP 0x00000000 +#define LEO_LC_SS0_USR_MAP 0x00800000 +#define LEO_LD_SS0_MAP 0x00801000 +#define LEO_LX_CURSOR_MAP 0x00802000 +#define LEO_SS1_MAP 0x00803000 +#define LEO_LC_SS1_USR_MAP 0x01003000 +#define LEO_LD_SS1_MAP 0x01004000 +#define LEO_UNK_MAP 0x01005000 +#define LEO_LX_KRN_MAP 0x01006000 +#define LEO_LC_SS0_KRN_MAP 0x01007000 +#define LEO_LC_SS1_KRN_MAP 0x01008000 +#define LEO_LD_GBL_MAP 0x01009000 +#define LEO_UNK2_MAP 0x0100a000 + +#ifdef __KERNEL__ +struct fbcmap32 { + int index; /* first element (0 origin) */ + int count; + u32 red; + u32 green; + u32 blue; +}; + +#define FBIOPUTCMAP32 _IOW('F', 3, struct fbcmap32) +#define FBIOGETCMAP32 _IOW('F', 4, struct fbcmap32) + +struct fbcursor32 { + short set; /* what to set, choose from the list above */ + short enable; /* cursor on/off */ + struct fbcurpos pos; /* cursor position */ + struct fbcurpos hot; /* cursor hot spot */ + struct fbcmap32 cmap; /* color map info */ + struct fbcurpos size; /* cursor bit map size */ + u32 image; /* cursor image bits */ + u32 mask; /* cursor mask bits */ +}; + +#define FBIOSCURSOR32 _IOW('F', 24, struct fbcursor32) +#define FBIOGCURSOR32 _IOW('F', 25, struct fbcursor32) +#endif + +#endif /* __LINUX_FBIO_H */ diff --git a/include/asm-m68k/idprom.h b/include/asm-m68k/idprom.h index 4349eaf3cfe..160616a89e0 100644 --- a/include/asm-m68k/idprom.h +++ b/include/asm-m68k/idprom.h @@ -1,6 +1,25 @@ #ifndef _M68K_IDPROM_H #define _M68K_IDPROM_H -#include +/* + * idprom.h: Macros and defines for idprom routines + * + * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu) + */ + +#include + +struct idprom { + u8 id_format; /* Format identifier (always 0x01) */ + u8 id_machtype; /* Machine type */ + u8 id_ethaddr[6]; /* Hardware ethernet address */ + s32 id_date; /* Date of manufacture */ + u32 id_sernum:24; /* Unique serial number */ + u8 id_cksum; /* Checksum - xor of the data bytes */ + u8 reserved[16]; +}; + +extern struct idprom *idprom; +extern void idprom_init(void); /* Sun3: in control space */ #define SUN3_IDPROM_BASE 0x00000000 -- GitLab From 18f6db95dcfa68e93bafe435381299abbffb5c7e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 4 Aug 2008 11:21:23 +0100 Subject: [PATCH 0761/1024] mn10300: Fix up __bug_table handling in module loader. Platforms that are using GENERIC_BUG must call in to module_bug_finalize()/module_bug_cleanup() in order to scan modules with their own __bug_table sections that are otherwise unaccounted. Signed-off-by: Paul Mundt Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/module.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c index 0e4d2f6fa6e..8fa36893df7 100644 --- a/arch/mn10300/kernel/module.c +++ b/arch/mn10300/kernel/module.c @@ -24,6 +24,7 @@ #include #include #include +#include #if 0 #define DEBUGP printk @@ -195,7 +196,7 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) { - return 0; + return module_bug_finalize(hdr, sechdrs, me); } /* @@ -203,4 +204,5 @@ int module_finalize(const Elf_Ehdr *hdr, */ void module_arch_cleanup(struct module *mod) { + module_bug_cleanup(mod); } -- GitLab From 115a326c1e5cab457924356123bbfd7d783ecf9d Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Mon, 4 Aug 2008 13:56:01 -0700 Subject: [PATCH 0762/1024] tracehook: kerneldoc fix My last change to tracehook.h made it confuse the kerneldoc parser. Move the #define's before the comment so it's happy again. Signed-off-by: Roland McGrath Acked-by: Randy Dunlap Signed-off-by: Linus Torvalds --- include/linux/tracehook.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index 12532839f50..ab3ef7aefa9 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -487,6 +487,9 @@ static inline int tracehook_notify_jctl(int notify, int why) return notify || (current->ptrace & PT_PTRACED); } +#define DEATH_REAP -1 +#define DEATH_DELAYED_GROUP_LEADER -2 + /** * tracehook_notify_death - task is dead, ready to notify parent * @task: @current task now exiting @@ -501,8 +504,6 @@ static inline int tracehook_notify_jctl(int notify, int why) * * Called with write_lock_irq(&tasklist_lock) held. */ -#define DEATH_REAP -1 -#define DEATH_DELAYED_GROUP_LEADER -2 static inline int tracehook_notify_death(struct task_struct *task, void **death_cookie, int group_dead) { -- GitLab From ab277121426edca2ee0601fc6318c9467350771e Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 29 Jul 2008 14:08:14 +0800 Subject: [PATCH 0763/1024] [ARM] pxa: introduce reset.h for reset specific header information Signed-off-by: Eric Miao --- arch/arm/mach-pxa/reset.c | 1 + arch/arm/mach-pxa/spitz.c | 1 + arch/arm/mach-pxa/tosa.c | 1 + include/asm-arm/arch-pxa/hardware.h | 5 ----- include/asm-arm/arch-pxa/reset.h | 9 +++++++++ 5 files changed, 12 insertions(+), 5 deletions(-) create mode 100644 include/asm-arm/arch-pxa/reset.h diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index 9d39dea57ce..d610a1244ab 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -12,6 +12,7 @@ #include #include +#include static void do_hw_reset(void); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 762249c03de..207fe3e6a3d 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index fea17ce6b55..4bd7d4f006e 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index 979a45695d7..351d0a72176 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -224,11 +224,6 @@ extern void pxa_gpio_set_value(unsigned gpio, int value); */ extern unsigned int get_memclk_frequency_10khz(void); -/* - * register GPIO as reset generator - */ -extern int init_gpio_reset(int gpio); - #endif #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) diff --git a/include/asm-arm/arch-pxa/reset.h b/include/asm-arm/arch-pxa/reset.h new file mode 100644 index 00000000000..6ca72c5cf7d --- /dev/null +++ b/include/asm-arm/arch-pxa/reset.h @@ -0,0 +1,9 @@ +#ifndef __ASM_ARCH_RESET_H +#define __ASM_ARCH_RESET_H + +/* + * register GPIO as reset generator + */ +extern int init_gpio_reset(int gpio); + +#endif /* __ASM_ARCH_RESET_H */ -- GitLab From 04fef228fb00dd79475a2313f4ba73b4fbfe2faa Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 29 Jul 2008 14:26:00 +0800 Subject: [PATCH 0764/1024] [ARM] pxa: introduce reset_status and clear_reset_status for driver's usage Due to the problem of reset status bits being handled by different registers between pxa2xx and pxa3xx, introduce a global reset_status variable, initialized by SoC-specific code and later being used by other drivers. And also introduce clear_reset_status(), which is used to clear the corresponding status bits. Pass RESET_STATUS_ALL to clear all bits. Signed-off-by: Eric Miao --- arch/arm/mach-pxa/generic.c | 10 ++++++++++ arch/arm/mach-pxa/generic.h | 8 ++++++++ arch/arm/mach-pxa/pxa25x.c | 4 ++++ arch/arm/mach-pxa/pxa27x.c | 4 ++++ arch/arm/mach-pxa/pxa2xx.c | 9 +++++++++ arch/arm/mach-pxa/pxa3xx.c | 10 ++++++++++ arch/arm/mach-pxa/reset.c | 7 ++++--- arch/arm/mach-sa1100/generic.c | 3 +++ include/asm-arm/arch-pxa/reset.h | 9 +++++++++ include/asm-arm/arch-sa1100/reset.h | 18 ++++++++++++++++++ 10 files changed, 79 insertions(+), 3 deletions(-) create mode 100644 include/asm-arm/arch-sa1100/reset.h diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index ca053226fba..36638926c5c 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -26,9 +26,19 @@ #include #include +#include #include "generic.h" +void clear_reset_status(unsigned int mask) +{ + if (cpu_is_pxa2xx()) + pxa2xx_clear_reset_status(mask); + + if (cpu_is_pxa3xx()) + pxa3xx_clear_reset_status(mask); +} + /* * Get the clock frequency as reflected by CCCR and the turbo flag. * We assume these values have been applied via a fcs. diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 5bb7ae75783..041c048320e 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -47,12 +47,20 @@ extern unsigned pxa27x_get_memclk_frequency_10khz(void); #define pxa27x_get_memclk_frequency_10khz() (0) #endif +#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) +extern void pxa2xx_clear_reset_status(unsigned int); +#else +static inline void pxa2xx_clear_reset_status(unsigned int mask) {} +#endif + #ifdef CONFIG_PXA3xx extern unsigned pxa3xx_get_clk_frequency_khz(int); extern unsigned pxa3xx_get_memclk_frequency_10khz(void); +extern void pxa3xx_clear_reset_status(unsigned int); #else #define pxa3xx_get_clk_frequency_khz(x) (0) #define pxa3xx_get_memclk_frequency_10khz() (0) +static inline void pxa3xx_clear_reset_status(unsigned int mask) {} #endif extern struct sysdev_class pxa_irq_sysclass; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index c5b845b935b..49a7a296ff3 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -348,6 +349,9 @@ static int __init pxa25x_init(void) clks_register(&pxa25x_hwuart_clk, 1); if (cpu_is_pxa21x() || cpu_is_pxa25x()) { + + reset_status = RCSR; + clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks)); if ((ret = pxa_init_dma(16))) diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index d5d14ea33f2..a8c12347a5a 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -384,6 +385,9 @@ static int __init pxa27x_init(void) int i, ret = 0; if (cpu_is_pxa27x()) { + + reset_status = RCSR; + clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks)); if ((ret = pxa_init_dma(32))) diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c index d4f6415e841..d93d3e6a6e2 100644 --- a/arch/arm/mach-pxa/pxa2xx.c +++ b/arch/arm/mach-pxa/pxa2xx.c @@ -14,10 +14,19 @@ #include #include +#include +#include #include #include +#include #include +void pxa2xx_clear_reset_status(unsigned int mask) +{ + /* RESET_STATUS_* has a 1:1 mapping with RCSR */ + RCSR = mask; +} + static unsigned long pxa2xx_mfp_fir[] = { GPIO46_FICP_RXD, GPIO47_FICP_TXD, diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index f491025a0c8..3d36c790f5c 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -24,6 +24,7 @@ #include #include +#include #include #include #include @@ -109,6 +110,12 @@ unsigned int pxa3xx_get_memclk_frequency_10khz(void) return (clk / 10000); } +void pxa3xx_clear_reset_status(unsigned int mask) +{ + /* RESET_STATUS_* has a 1:1 mapping with ARSR */ + ARSR = mask; +} + /* * Return the current AC97 clock frequency. */ @@ -532,6 +539,9 @@ static int __init pxa3xx_init(void) int i, ret = 0; if (cpu_is_pxa3xx()) { + + reset_status = ARSR; + /* * clear RDH bit every time after reset * diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index d610a1244ab..56f60d923a9 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -11,9 +11,11 @@ #include #include -#include #include +unsigned int reset_status; +EXPORT_SYMBOL(reset_status); + static void do_hw_reset(void); static int reset_gpio = -1; @@ -78,8 +80,7 @@ static void do_hw_reset(void) void arch_reset(char mode) { - if (cpu_is_pxa2xx()) - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + clear_reset_status(RESET_STATUS_ALL); switch (mode) { case 's': diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 0c2fa1c4fb4..3b6fc090c8e 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -31,6 +31,9 @@ #include "generic.h" +unsigned int reset_status; +EXPORT_SYMBOL(reset_status); + #define NR_FREQS 16 /* diff --git a/include/asm-arm/arch-pxa/reset.h b/include/asm-arm/arch-pxa/reset.h index 6ca72c5cf7d..9489a48871a 100644 --- a/include/asm-arm/arch-pxa/reset.h +++ b/include/asm-arm/arch-pxa/reset.h @@ -1,6 +1,15 @@ #ifndef __ASM_ARCH_RESET_H #define __ASM_ARCH_RESET_H +#define RESET_STATUS_HARDWARE (1 << 0) /* Hardware Reset */ +#define RESET_STATUS_WATCHDOG (1 << 1) /* Watchdog Reset */ +#define RESET_STATUS_LOWPOWER (1 << 2) /* Low Power/Sleep Exit */ +#define RESET_STATUS_GPIO (1 << 3) /* GPIO Reset */ +#define RESET_STATUS_ALL (0xf) + +extern unsigned int reset_status; +extern void clear_reset_status(unsigned int mask); + /* * register GPIO as reset generator */ diff --git a/include/asm-arm/arch-sa1100/reset.h b/include/asm-arm/arch-sa1100/reset.h new file mode 100644 index 00000000000..f61957e6842 --- /dev/null +++ b/include/asm-arm/arch-sa1100/reset.h @@ -0,0 +1,18 @@ +#ifndef __ASM_ARCH_RESET_H +#define __ASM_ARCH_RESET_H + +#include "hardware.h" + +#define RESET_STATUS_HARDWARE (1 << 0) /* Hardware Reset */ +#define RESET_STATUS_WATCHDOG (1 << 1) /* Watchdog Reset */ +#define RESET_STATUS_LOWPOWER (1 << 2) /* Exit from Low Power/Sleep */ +#define RESET_STATUS_GPIO (1 << 3) /* GPIO Reset */ +#define RESET_STATUS_ALL (0xf) + +extern unsigned int reset_status; +static inline void clear_reset_status(unsigned int mask) +{ + RCSR = mask; +} + +#endif /* __ASM_ARCH_RESET_H */ -- GitLab From 214c6a7ed13e01cab2addeef56124067e4d20147 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 29 Jul 2008 14:39:34 +0800 Subject: [PATCH 0765/1024] [ARM] sa1100_wdt: use reset_status to remember watchdog reset status Signed-off-by: Eric Miao --- drivers/watchdog/sa1100_wdt.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index 34a2b3b8180..e42002d2f81 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -31,6 +31,8 @@ #include #endif +#include + #include #include @@ -162,7 +164,8 @@ static int __init sa1100dog_init(void) * we suspend, RCSR will be cleared, and the watchdog * reset reason will be lost. */ - boot_status = (RCSR & RCSR_WDR) ? WDIOF_CARDRESET : 0; + boot_status = (reset_status & RESET_STATUS_WATCHDOG) ? + WDIOF_CARDRESET : 0; pre_margin = OSCR_FREQ * margin; ret = misc_register(&sa1100dog_miscdev); -- GitLab From 529ae9aaa08378cfe2a4350bded76f32cc8ff0ce Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Sat, 2 Aug 2008 12:01:03 +0200 Subject: [PATCH 0766/1024] mm: rename page trylock Converting page lock to new locking bitops requires a change of page flag operation naming, so we might as well convert it to something nicer (!TestSetPageLocked_Lock => trylock_page, SetPageLocked => set_page_locked). This also facilitates lockdeping of page lock. Signed-off-by: Nick Piggin Acked-by: KOSAKI Motohiro Acked-by: Peter Zijlstra Acked-by: Andrew Morton Acked-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- drivers/scsi/sg.c | 2 +- fs/afs/write.c | 2 +- fs/cifs/file.c | 2 +- fs/jbd/commit.c | 4 +-- fs/jbd2/commit.c | 2 +- fs/reiserfs/journal.c | 2 +- fs/splice.c | 2 +- fs/xfs/linux-2.6/xfs_aops.c | 4 +-- include/linux/page-flags.h | 2 +- include/linux/pagemap.h | 67 +++++++++++++++++++++++-------------- mm/filemap.c | 12 +++---- mm/memory.c | 2 +- mm/migrate.c | 4 +-- mm/rmap.c | 2 +- mm/shmem.c | 4 +-- mm/swap.c | 2 +- mm/swap_state.c | 8 ++--- mm/swapfile.c | 2 +- mm/truncate.c | 4 +-- mm/vmscan.c | 4 +-- 20 files changed, 74 insertions(+), 59 deletions(-) diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index d3b8ebb8377..3d36270a8b4 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1747,7 +1747,7 @@ st_map_user_pages(struct scatterlist *sgl, const unsigned int max_pages, */ flush_dcache_page(pages[i]); /* ?? Is locking needed? I don't think so */ - /* if (TestSetPageLocked(pages[i])) + /* if (!trylock_page(pages[i])) goto out_unlock; */ } diff --git a/fs/afs/write.c b/fs/afs/write.c index 9a849ad3c48..065b4e10681 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -404,7 +404,7 @@ static int afs_write_back_from_locked_page(struct afs_writeback *wb, page = pages[loop]; if (page->index > wb->last) break; - if (TestSetPageLocked(page)) + if (!trylock_page(page)) break; if (!PageDirty(page) || page_private(page) != (unsigned long) wb) { diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 0aac824371a..e692c42f24b 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1280,7 +1280,7 @@ retry: if (first < 0) lock_page(page); - else if (TestSetPageLocked(page)) + else if (!trylock_page(page)) break; if (unlikely(page->mapping != mapping)) { diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c index 2eccbfaa1d4..81a9ad7177c 100644 --- a/fs/jbd/commit.c +++ b/fs/jbd/commit.c @@ -63,7 +63,7 @@ static void release_buffer_page(struct buffer_head *bh) goto nope; /* OK, it's a truncated page */ - if (TestSetPageLocked(page)) + if (!trylock_page(page)) goto nope; page_cache_get(page); @@ -446,7 +446,7 @@ void journal_commit_transaction(journal_t *journal) spin_lock(&journal->j_list_lock); } if (unlikely(!buffer_uptodate(bh))) { - if (TestSetPageLocked(bh->b_page)) { + if (!trylock_page(bh->b_page)) { spin_unlock(&journal->j_list_lock); lock_page(bh->b_page); spin_lock(&journal->j_list_lock); diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index adf0395f318..f2ad061e95e 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -67,7 +67,7 @@ static void release_buffer_page(struct buffer_head *bh) goto nope; /* OK, it's a truncated page */ - if (TestSetPageLocked(page)) + if (!trylock_page(page)) goto nope; page_cache_get(page); diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index c8f60ee183b..ce2208b2711 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -627,7 +627,7 @@ static int journal_list_still_alive(struct super_block *s, static void release_buffer_page(struct buffer_head *bh) { struct page *page = bh->b_page; - if (!page->mapping && !TestSetPageLocked(page)) { + if (!page->mapping && trylock_page(page)) { page_cache_get(page); put_bh(bh); if (!page->mapping) diff --git a/fs/splice.c b/fs/splice.c index b30311ba8af..1bbc6f4bb09 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -371,7 +371,7 @@ __generic_file_splice_read(struct file *in, loff_t *ppos, * for an in-flight io page */ if (flags & SPLICE_F_NONBLOCK) { - if (TestSetPageLocked(page)) { + if (!trylock_page(page)) { error = -EAGAIN; break; } diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c index 0b211cba190..fa73179233a 100644 --- a/fs/xfs/linux-2.6/xfs_aops.c +++ b/fs/xfs/linux-2.6/xfs_aops.c @@ -675,7 +675,7 @@ xfs_probe_cluster( } else pg_offset = PAGE_CACHE_SIZE; - if (page->index == tindex && !TestSetPageLocked(page)) { + if (page->index == tindex && trylock_page(page)) { pg_len = xfs_probe_page(page, pg_offset, mapped); unlock_page(page); } @@ -759,7 +759,7 @@ xfs_convert_page( if (page->index != tindex) goto fail; - if (TestSetPageLocked(page)) + if (!trylock_page(page)) goto fail; if (PageWriteback(page)) goto fail_unlock_page; diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 25aaccdb2f2..c74d3e87531 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -163,7 +163,7 @@ static inline int Page##uname(struct page *page) \ struct page; /* forward declaration */ -PAGEFLAG(Locked, locked) TESTSCFLAG(Locked, locked) +TESTPAGEFLAG(Locked, locked) PAGEFLAG(Error, error) PAGEFLAG(Referenced, referenced) TESTCLEARFLAG(Referenced, referenced) PAGEFLAG(Dirty, dirty) TESTSCFLAG(Dirty, dirty) __CLEARPAGEFLAG(Dirty, dirty) diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index 69ed3cb1197..5da31c12101 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -250,29 +250,6 @@ static inline struct page *read_mapping_page(struct address_space *mapping, return read_cache_page(mapping, index, filler, data); } -int add_to_page_cache_locked(struct page *page, struct address_space *mapping, - pgoff_t index, gfp_t gfp_mask); -int add_to_page_cache_lru(struct page *page, struct address_space *mapping, - pgoff_t index, gfp_t gfp_mask); -extern void remove_from_page_cache(struct page *page); -extern void __remove_from_page_cache(struct page *page); - -/* - * Like add_to_page_cache_locked, but used to add newly allocated pages: - * the page is new, so we can just run SetPageLocked() against it. - */ -static inline int add_to_page_cache(struct page *page, - struct address_space *mapping, pgoff_t offset, gfp_t gfp_mask) -{ - int error; - - SetPageLocked(page); - error = add_to_page_cache_locked(page, mapping, offset, gfp_mask); - if (unlikely(error)) - ClearPageLocked(page); - return error; -} - /* * Return byte-offset into filesystem object for page. */ @@ -294,13 +271,28 @@ extern int __lock_page_killable(struct page *page); extern void __lock_page_nosync(struct page *page); extern void unlock_page(struct page *page); +static inline void set_page_locked(struct page *page) +{ + set_bit(PG_locked, &page->flags); +} + +static inline void clear_page_locked(struct page *page) +{ + clear_bit(PG_locked, &page->flags); +} + +static inline int trylock_page(struct page *page) +{ + return !test_and_set_bit(PG_locked, &page->flags); +} + /* * lock_page may only be called if we have the page's inode pinned. */ static inline void lock_page(struct page *page) { might_sleep(); - if (TestSetPageLocked(page)) + if (!trylock_page(page)) __lock_page(page); } @@ -312,7 +304,7 @@ static inline void lock_page(struct page *page) static inline int lock_page_killable(struct page *page) { might_sleep(); - if (TestSetPageLocked(page)) + if (!trylock_page(page)) return __lock_page_killable(page); return 0; } @@ -324,7 +316,7 @@ static inline int lock_page_killable(struct page *page) static inline void lock_page_nosync(struct page *page) { might_sleep(); - if (TestSetPageLocked(page)) + if (!trylock_page(page)) __lock_page_nosync(page); } @@ -409,4 +401,27 @@ static inline int fault_in_pages_readable(const char __user *uaddr, int size) return ret; } +int add_to_page_cache_locked(struct page *page, struct address_space *mapping, + pgoff_t index, gfp_t gfp_mask); +int add_to_page_cache_lru(struct page *page, struct address_space *mapping, + pgoff_t index, gfp_t gfp_mask); +extern void remove_from_page_cache(struct page *page); +extern void __remove_from_page_cache(struct page *page); + +/* + * Like add_to_page_cache_locked, but used to add newly allocated pages: + * the page is new, so we can just run set_page_locked() against it. + */ +static inline int add_to_page_cache(struct page *page, + struct address_space *mapping, pgoff_t offset, gfp_t gfp_mask) +{ + int error; + + set_page_locked(page); + error = add_to_page_cache_locked(page, mapping, offset, gfp_mask); + if (unlikely(error)) + clear_page_locked(page); + return error; +} + #endif /* _LINUX_PAGEMAP_H */ diff --git a/mm/filemap.c b/mm/filemap.c index d97d1ad5547..54e96865085 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -558,14 +558,14 @@ EXPORT_SYMBOL(wait_on_page_bit); * But that's OK - sleepers in wait_on_page_writeback() just go back to sleep. * * The first mb is necessary to safely close the critical section opened by the - * TestSetPageLocked(), the second mb is necessary to enforce ordering between - * the clear_bit and the read of the waitqueue (to avoid SMP races with a - * parallel wait_on_page_locked()). + * test_and_set_bit() to lock the page; the second mb is necessary to enforce + * ordering between the clear_bit and the read of the waitqueue (to avoid SMP + * races with a parallel wait_on_page_locked()). */ void unlock_page(struct page *page) { smp_mb__before_clear_bit(); - if (!TestClearPageLocked(page)) + if (!test_and_clear_bit(PG_locked, &page->flags)) BUG(); smp_mb__after_clear_bit(); wake_up_page(page, PG_locked); @@ -931,7 +931,7 @@ grab_cache_page_nowait(struct address_space *mapping, pgoff_t index) struct page *page = find_get_page(mapping, index); if (page) { - if (!TestSetPageLocked(page)) + if (trylock_page(page)) return page; page_cache_release(page); return NULL; @@ -1027,7 +1027,7 @@ find_page: if (inode->i_blkbits == PAGE_CACHE_SHIFT || !mapping->a_ops->is_partially_uptodate) goto page_not_up_to_date; - if (TestSetPageLocked(page)) + if (!trylock_page(page)) goto page_not_up_to_date; if (!mapping->a_ops->is_partially_uptodate(page, desc, offset)) diff --git a/mm/memory.c b/mm/memory.c index a472bcd4b06..1002f473f49 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1789,7 +1789,7 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, * not dirty accountable. */ if (PageAnon(old_page)) { - if (!TestSetPageLocked(old_page)) { + if (trylock_page(old_page)) { reuse = can_share_swap_page(old_page); unlock_page(old_page); } diff --git a/mm/migrate.c b/mm/migrate.c index 153572fb60b..2a80136b23b 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -605,7 +605,7 @@ static int move_to_new_page(struct page *newpage, struct page *page) * establishing additional references. We are the only one * holding a reference to the new page at this point. */ - if (TestSetPageLocked(newpage)) + if (!trylock_page(newpage)) BUG(); /* Prepare mapping for the new page.*/ @@ -667,7 +667,7 @@ static int unmap_and_move(new_page_t get_new_page, unsigned long private, BUG_ON(charge); rc = -EAGAIN; - if (TestSetPageLocked(page)) { + if (!trylock_page(page)) { if (!force) goto move_newpage; lock_page(page); diff --git a/mm/rmap.c b/mm/rmap.c index 94a5246a3f9..1ea4e6fcee7 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -422,7 +422,7 @@ int page_referenced(struct page *page, int is_locked, referenced += page_referenced_anon(page, mem_cont); else if (is_locked) referenced += page_referenced_file(page, mem_cont); - else if (TestSetPageLocked(page)) + else if (!trylock_page(page)) referenced++; else { if (page->mapping) diff --git a/mm/shmem.c b/mm/shmem.c index c1e5a3b4f75..04fb4f1ab88 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -1265,7 +1265,7 @@ repeat: } /* We have to do this with page locked to prevent races */ - if (TestSetPageLocked(swappage)) { + if (!trylock_page(swappage)) { shmem_swp_unmap(entry); spin_unlock(&info->lock); wait_on_page_locked(swappage); @@ -1329,7 +1329,7 @@ repeat: shmem_swp_unmap(entry); filepage = find_get_page(mapping, idx); if (filepage && - (!PageUptodate(filepage) || TestSetPageLocked(filepage))) { + (!PageUptodate(filepage) || !trylock_page(filepage))) { spin_unlock(&info->lock); wait_on_page_locked(filepage); page_cache_release(filepage); diff --git a/mm/swap.c b/mm/swap.c index 7417a2adbe5..9e0cb311807 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -444,7 +444,7 @@ void pagevec_strip(struct pagevec *pvec) for (i = 0; i < pagevec_count(pvec); i++) { struct page *page = pvec->pages[i]; - if (PagePrivate(page) && !TestSetPageLocked(page)) { + if (PagePrivate(page) && trylock_page(page)) { if (PagePrivate(page)) try_to_release_page(page, 0); unlock_page(page); diff --git a/mm/swap_state.c b/mm/swap_state.c index b8035b05512..167cf2dc8a0 100644 --- a/mm/swap_state.c +++ b/mm/swap_state.c @@ -201,7 +201,7 @@ void delete_from_swap_cache(struct page *page) */ static inline void free_swap_cache(struct page *page) { - if (PageSwapCache(page) && !TestSetPageLocked(page)) { + if (PageSwapCache(page) && trylock_page(page)) { remove_exclusive_swap_page(page); unlock_page(page); } @@ -302,9 +302,9 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask, * re-using the just freed swap entry for an existing page. * May fail (-ENOMEM) if radix-tree node allocation failed. */ - SetPageLocked(new_page); + set_page_locked(new_page); err = add_to_swap_cache(new_page, entry, gfp_mask & GFP_KERNEL); - if (!err) { + if (likely(!err)) { /* * Initiate read into locked page and return. */ @@ -312,7 +312,7 @@ struct page *read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask, swap_readpage(NULL, new_page); return new_page; } - ClearPageLocked(new_page); + clear_page_locked(new_page); swap_free(entry); } while (err != -ENOMEM); diff --git a/mm/swapfile.c b/mm/swapfile.c index bb7f79641f9..1e330f2998f 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -403,7 +403,7 @@ void free_swap_and_cache(swp_entry_t entry) if (p) { if (swap_entry_free(p, swp_offset(entry)) == 1) { page = find_get_page(&swapper_space, entry.val); - if (page && unlikely(TestSetPageLocked(page))) { + if (page && unlikely(!trylock_page(page))) { page_cache_release(page); page = NULL; } diff --git a/mm/truncate.c b/mm/truncate.c index 894e9a70699..250505091d3 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -187,7 +187,7 @@ void truncate_inode_pages_range(struct address_space *mapping, if (page_index > next) next = page_index; next++; - if (TestSetPageLocked(page)) + if (!trylock_page(page)) continue; if (PageWriteback(page)) { unlock_page(page); @@ -280,7 +280,7 @@ unsigned long __invalidate_mapping_pages(struct address_space *mapping, pgoff_t index; int lock_failed; - lock_failed = TestSetPageLocked(page); + lock_failed = !trylock_page(page); /* * We really shouldn't be looking at the ->index of an diff --git a/mm/vmscan.c b/mm/vmscan.c index 75be453628b..1ff1a58e7c1 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -496,7 +496,7 @@ static unsigned long shrink_page_list(struct list_head *page_list, page = lru_to_page(page_list); list_del(&page->lru); - if (TestSetPageLocked(page)) + if (!trylock_page(page)) goto keep; VM_BUG_ON(PageActive(page)); @@ -582,7 +582,7 @@ static unsigned long shrink_page_list(struct list_head *page_list, * A synchronous write - probably a ramdisk. Go * ahead and try to reclaim the page. */ - if (TestSetPageLocked(page)) + if (!trylock_page(page)) goto keep; if (PageDirty(page) || PageWriteback(page)) goto keep_locked; -- GitLab From ca5de404ff036a29b25e9a83f6919c9f606c5841 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Sat, 2 Aug 2008 12:02:13 +0200 Subject: [PATCH 0767/1024] fs: rename buffer trylock Like the page lock change, this also requires name change, so convert the raw test_and_set bitop to a trylock. Signed-off-by: Nick Piggin Signed-off-by: Linus Torvalds --- fs/buffer.c | 4 ++-- fs/jbd/commit.c | 2 +- fs/ntfs/aops.c | 2 +- fs/ntfs/compress.c | 2 +- fs/ntfs/mft.c | 4 ++-- fs/reiserfs/inode.c | 2 +- fs/reiserfs/journal.c | 4 ++-- fs/xfs/linux-2.6/xfs_aops.c | 2 +- include/linux/buffer_head.h | 8 ++++++-- 9 files changed, 17 insertions(+), 13 deletions(-) diff --git a/fs/buffer.c b/fs/buffer.c index 4dbe52948e8..38653e36e22 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -1720,7 +1720,7 @@ static int __block_write_full_page(struct inode *inode, struct page *page, */ if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) { lock_buffer(bh); - } else if (test_set_buffer_locked(bh)) { + } else if (!trylock_buffer(bh)) { redirty_page_for_writepage(wbc, page); continue; } @@ -3000,7 +3000,7 @@ void ll_rw_block(int rw, int nr, struct buffer_head *bhs[]) if (rw == SWRITE || rw == SWRITE_SYNC) lock_buffer(bh); - else if (test_set_buffer_locked(bh)) + else if (!trylock_buffer(bh)) continue; if (rw == WRITE || rw == SWRITE || rw == SWRITE_SYNC) { diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c index 81a9ad7177c..ae08c057e75 100644 --- a/fs/jbd/commit.c +++ b/fs/jbd/commit.c @@ -221,7 +221,7 @@ write_out_data: * blocking lock_buffer(). */ if (buffer_dirty(bh)) { - if (test_set_buffer_locked(bh)) { + if (!trylock_buffer(bh)) { BUFFER_TRACE(bh, "needs blocking lock"); spin_unlock(&journal->j_list_lock); /* Write out all data to prevent deadlocks */ diff --git a/fs/ntfs/aops.c b/fs/ntfs/aops.c index 00e9ccde8e4..b38f944f066 100644 --- a/fs/ntfs/aops.c +++ b/fs/ntfs/aops.c @@ -1194,7 +1194,7 @@ lock_retry_remap: tbh = bhs[i]; if (!tbh) continue; - if (unlikely(test_set_buffer_locked(tbh))) + if (!trylock_buffer(tbh)) BUG(); /* The buffer dirty state is now irrelevant, just clean it. */ clear_buffer_dirty(tbh); diff --git a/fs/ntfs/compress.c b/fs/ntfs/compress.c index 33ff314cc50..9669541d011 100644 --- a/fs/ntfs/compress.c +++ b/fs/ntfs/compress.c @@ -665,7 +665,7 @@ lock_retry_remap: for (i = 0; i < nr_bhs; i++) { struct buffer_head *tbh = bhs[i]; - if (unlikely(test_set_buffer_locked(tbh))) + if (!trylock_buffer(tbh)) continue; if (unlikely(buffer_uptodate(tbh))) { unlock_buffer(tbh); diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c index 790defb847e..17d32ca6bc3 100644 --- a/fs/ntfs/mft.c +++ b/fs/ntfs/mft.c @@ -586,7 +586,7 @@ int ntfs_sync_mft_mirror(ntfs_volume *vol, const unsigned long mft_no, for (i_bhs = 0; i_bhs < nr_bhs; i_bhs++) { struct buffer_head *tbh = bhs[i_bhs]; - if (unlikely(test_set_buffer_locked(tbh))) + if (!trylock_buffer(tbh)) BUG(); BUG_ON(!buffer_uptodate(tbh)); clear_buffer_dirty(tbh); @@ -779,7 +779,7 @@ int write_mft_record_nolock(ntfs_inode *ni, MFT_RECORD *m, int sync) for (i_bhs = 0; i_bhs < nr_bhs; i_bhs++) { struct buffer_head *tbh = bhs[i_bhs]; - if (unlikely(test_set_buffer_locked(tbh))) + if (!trylock_buffer(tbh)) BUG(); BUG_ON(!buffer_uptodate(tbh)); clear_buffer_dirty(tbh); diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 192269698a8..5699171212a 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -2435,7 +2435,7 @@ static int reiserfs_write_full_page(struct page *page, if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) { lock_buffer(bh); } else { - if (test_set_buffer_locked(bh)) { + if (!trylock_buffer(bh)) { redirty_page_for_writepage(wbc, page); continue; } diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c index ce2208b2711..c21df71943a 100644 --- a/fs/reiserfs/journal.c +++ b/fs/reiserfs/journal.c @@ -855,7 +855,7 @@ static int write_ordered_buffers(spinlock_t * lock, jh = JH_ENTRY(list->next); bh = jh->bh; get_bh(bh); - if (test_set_buffer_locked(bh)) { + if (!trylock_buffer(bh)) { if (!buffer_dirty(bh)) { list_move(&jh->list, &tmp); goto loop_next; @@ -3871,7 +3871,7 @@ int reiserfs_prepare_for_journal(struct super_block *p_s_sb, { PROC_INFO_INC(p_s_sb, journal.prepare); - if (test_set_buffer_locked(bh)) { + if (!trylock_buffer(bh)) { if (!wait) return 0; lock_buffer(bh); diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c index fa73179233a..fa47e43b8b4 100644 --- a/fs/xfs/linux-2.6/xfs_aops.c +++ b/fs/xfs/linux-2.6/xfs_aops.c @@ -1104,7 +1104,7 @@ xfs_page_state_convert( * that we are writing into for the first time. */ type = IOMAP_NEW; - if (!test_and_set_bit(BH_Lock, &bh->b_state)) { + if (trylock_buffer(bh)) { ASSERT(buffer_mapped(bh)); if (iomap_valid) all_bh = 1; diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index 50cfe8ceb47..eadaab44015 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -115,7 +115,6 @@ BUFFER_FNS(Uptodate, uptodate) BUFFER_FNS(Dirty, dirty) TAS_BUFFER_FNS(Dirty, dirty) BUFFER_FNS(Lock, locked) -TAS_BUFFER_FNS(Lock, locked) BUFFER_FNS(Req, req) TAS_BUFFER_FNS(Req, req) BUFFER_FNS(Mapped, mapped) @@ -321,10 +320,15 @@ static inline void wait_on_buffer(struct buffer_head *bh) __wait_on_buffer(bh); } +static inline int trylock_buffer(struct buffer_head *bh) +{ + return likely(!test_and_set_bit(BH_Lock, &bh->b_state)); +} + static inline void lock_buffer(struct buffer_head *bh) { might_sleep(); - if (test_set_buffer_locked(bh)) + if (!trylock_buffer(bh)) __lock_buffer(bh); } -- GitLab From 378a2f090f7a478704a372a4869b8a9ac206234e Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Mon, 4 Aug 2008 22:31:03 -0700 Subject: [PATCH 0768/1024] net_sched: Add qdisc __NET_XMIT_STOLEN flag Patrick McHardy noticed: "The other problem that affects all qdiscs supporting actions is TC_ACT_QUEUED/TC_ACT_STOLEN getting mapped to NET_XMIT_SUCCESS even though the packet is not queued, corrupting upper qdiscs' qlen counters." and later explained: "The reason why it translates it at all seems to be to not increase the drops counter. Within a single qdisc this could be avoided by other means easily, upper qdiscs would still increase the counter when we return anything besides NET_XMIT_SUCCESS though. This means we need a new NET_XMIT return value to indicate this to the upper qdiscs. So I'd suggest to introduce NET_XMIT_STOLEN, return that to upper qdiscs and translate it to NET_XMIT_SUCCESS in dev_queue_xmit, similar to NET_XMIT_BYPASS." David Miller noticed: "Maybe these NET_XMIT_* values being passed around should be a set of bits. They could be composed of base meanings, combined with specific attributes. So you could say "NET_XMIT_DROP | __NET_XMIT_NO_DROP_COUNT" The attributes get masked out by the top-level ->enqueue() caller, such that the base meanings are the only thing that make their way up into the stack. If it's only about communication within the qdisc tree, let's simply code it that way." This patch is trying to realize these ideas. Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- include/linux/netdevice.h | 1 + include/net/sch_generic.h | 14 +++++++++++++- net/sched/sch_atm.c | 12 +++++++----- net/sched/sch_cbq.c | 23 +++++++++++++++-------- net/sched/sch_dsmark.c | 8 +++++--- net/sched/sch_hfsc.c | 8 +++++--- net/sched/sch_htb.c | 18 +++++++++++------- net/sched/sch_netem.c | 3 ++- net/sched/sch_prio.c | 8 +++++--- net/sched/sch_red.c | 2 +- net/sched/sch_sfq.c | 2 +- net/sched/sch_tbf.c | 3 ++- 12 files changed, 68 insertions(+), 34 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index ee583f642a9..abbf5d52ec8 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -64,6 +64,7 @@ struct wireless_dev; #define NET_XMIT_BYPASS 4 /* packet does not leave via dequeue; (TC use only - dev_queue_xmit returns this as NET_XMIT_SUCCESS) */ +#define NET_XMIT_MASK 0xFFFF /* qdisc flags in net/sch_generic.h */ /* Backlog congestion levels */ #define NET_RX_SUCCESS 0 /* keep 'em coming, baby */ diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index c5bb1306505..f15b045a85e 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -343,6 +343,18 @@ static inline unsigned int qdisc_pkt_len(struct sk_buff *skb) return qdisc_skb_cb(skb)->pkt_len; } +#ifdef CONFIG_NET_CLS_ACT +/* additional qdisc xmit flags */ +enum net_xmit_qdisc_t { + __NET_XMIT_STOLEN = 0x00010000, +}; + +#define net_xmit_drop_count(e) ((e) & __NET_XMIT_STOLEN ? 0 : 1) + +#else +#define net_xmit_drop_count(e) (1) +#endif + static inline int qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch) { #ifdef CONFIG_NET_SCHED @@ -355,7 +367,7 @@ static inline int qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch) static inline int qdisc_enqueue_root(struct sk_buff *skb, struct Qdisc *sch) { qdisc_skb_cb(skb)->pkt_len = skb->len; - return qdisc_enqueue(skb, sch); + return qdisc_enqueue(skb, sch) & NET_XMIT_MASK; } static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch, diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c index 6b517b9dac5..27dd773481b 100644 --- a/net/sched/sch_atm.c +++ b/net/sched/sch_atm.c @@ -415,7 +415,7 @@ static int atm_tc_enqueue(struct sk_buff *skb, struct Qdisc *sch) case TC_ACT_QUEUED: case TC_ACT_STOLEN: kfree_skb(skb); - return NET_XMIT_SUCCESS; + return NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; case TC_ACT_SHOT: kfree_skb(skb); goto drop; @@ -432,9 +432,11 @@ static int atm_tc_enqueue(struct sk_buff *skb, struct Qdisc *sch) ret = qdisc_enqueue(skb, flow->q); if (ret != 0) { drop: __maybe_unused - sch->qstats.drops++; - if (flow) - flow->qstats.drops++; + if (net_xmit_drop_count(ret)) { + sch->qstats.drops++; + if (flow) + flow->qstats.drops++; + } return ret; } sch->bstats.bytes += qdisc_pkt_len(skb); @@ -530,7 +532,7 @@ static int atm_tc_requeue(struct sk_buff *skb, struct Qdisc *sch) if (!ret) { sch->q.qlen++; sch->qstats.requeues++; - } else { + } else if (net_xmit_drop_count(ret)) { sch->qstats.drops++; p->link.qstats.drops++; } diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index 14954bf4a68..765ae565900 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -256,7 +256,7 @@ cbq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr) switch (result) { case TC_ACT_QUEUED: case TC_ACT_STOLEN: - *qerr = NET_XMIT_SUCCESS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; case TC_ACT_SHOT: return NULL; case TC_ACT_RECLASSIFY: @@ -397,9 +397,11 @@ cbq_enqueue(struct sk_buff *skb, struct Qdisc *sch) return ret; } - sch->qstats.drops++; - cbq_mark_toplevel(q, cl); - cl->qstats.drops++; + if (net_xmit_drop_count(ret)) { + sch->qstats.drops++; + cbq_mark_toplevel(q, cl); + cl->qstats.drops++; + } return ret; } @@ -430,8 +432,10 @@ cbq_requeue(struct sk_buff *skb, struct Qdisc *sch) cbq_activate_class(cl); return 0; } - sch->qstats.drops++; - cl->qstats.drops++; + if (net_xmit_drop_count(ret)) { + sch->qstats.drops++; + cl->qstats.drops++; + } return ret; } @@ -664,13 +668,15 @@ static int cbq_reshape_fail(struct sk_buff *skb, struct Qdisc *child) q->rx_class = NULL; if (cl && (cl = cbq_reclassify(skb, cl)) != NULL) { + int ret; cbq_mark_toplevel(q, cl); q->rx_class = cl; cl->q->__parent = sch; - if (qdisc_enqueue(skb, cl->q) == 0) { + ret = qdisc_enqueue(skb, cl->q); + if (ret == NET_XMIT_SUCCESS) { sch->q.qlen++; sch->bstats.packets++; sch->bstats.bytes += qdisc_pkt_len(skb); @@ -678,7 +684,8 @@ static int cbq_reshape_fail(struct sk_buff *skb, struct Qdisc *child) cbq_activate_class(cl); return 0; } - sch->qstats.drops++; + if (net_xmit_drop_count(ret)) + sch->qstats.drops++; return 0; } diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c index a935676987e..7170275d9f9 100644 --- a/net/sched/sch_dsmark.c +++ b/net/sched/sch_dsmark.c @@ -236,7 +236,7 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch) case TC_ACT_QUEUED: case TC_ACT_STOLEN: kfree_skb(skb); - return NET_XMIT_SUCCESS; + return NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; case TC_ACT_SHOT: goto drop; @@ -254,7 +254,8 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch) err = qdisc_enqueue(skb, p->q); if (err != NET_XMIT_SUCCESS) { - sch->qstats.drops++; + if (net_xmit_drop_count(err)) + sch->qstats.drops++; return err; } @@ -321,7 +322,8 @@ static int dsmark_requeue(struct sk_buff *skb, struct Qdisc *sch) err = p->q->ops->requeue(skb, p->q); if (err != NET_XMIT_SUCCESS) { - sch->qstats.drops++; + if (net_xmit_drop_count(err)) + sch->qstats.drops++; return err; } diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index 0ae7d19dcba..5cf9ae71611 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1166,7 +1166,7 @@ hfsc_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr) switch (result) { case TC_ACT_QUEUED: case TC_ACT_STOLEN: - *qerr = NET_XMIT_SUCCESS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; case TC_ACT_SHOT: return NULL; } @@ -1586,8 +1586,10 @@ hfsc_enqueue(struct sk_buff *skb, struct Qdisc *sch) err = qdisc_enqueue(skb, cl->qdisc); if (unlikely(err != NET_XMIT_SUCCESS)) { - cl->qstats.drops++; - sch->qstats.drops++; + if (net_xmit_drop_count(err)) { + cl->qstats.drops++; + sch->qstats.drops++; + } return err; } diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 75a40951c4f..538d79b489a 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -221,7 +221,7 @@ static struct htb_class *htb_classify(struct sk_buff *skb, struct Qdisc *sch, switch (result) { case TC_ACT_QUEUED: case TC_ACT_STOLEN: - *qerr = NET_XMIT_SUCCESS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; case TC_ACT_SHOT: return NULL; } @@ -572,9 +572,11 @@ static int htb_enqueue(struct sk_buff *skb, struct Qdisc *sch) kfree_skb(skb); return ret; #endif - } else if (qdisc_enqueue(skb, cl->un.leaf.q) != NET_XMIT_SUCCESS) { - sch->qstats.drops++; - cl->qstats.drops++; + } else if ((ret = qdisc_enqueue(skb, cl->un.leaf.q)) != NET_XMIT_SUCCESS) { + if (net_xmit_drop_count(ret)) { + sch->qstats.drops++; + cl->qstats.drops++; + } return NET_XMIT_DROP; } else { cl->bstats.packets += @@ -615,10 +617,12 @@ static int htb_requeue(struct sk_buff *skb, struct Qdisc *sch) kfree_skb(skb); return ret; #endif - } else if (cl->un.leaf.q->ops->requeue(skb, cl->un.leaf.q) != + } else if ((ret = cl->un.leaf.q->ops->requeue(skb, cl->un.leaf.q)) != NET_XMIT_SUCCESS) { - sch->qstats.drops++; - cl->qstats.drops++; + if (net_xmit_drop_count(ret)) { + sch->qstats.drops++; + cl->qstats.drops++; + } return NET_XMIT_DROP; } else htb_activate(q, cl); diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index a5908570067..6cd6f2bc749 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -240,8 +240,9 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch) sch->q.qlen++; sch->bstats.bytes += qdisc_pkt_len(skb); sch->bstats.packets++; - } else + } else if (net_xmit_drop_count(ret)) { sch->qstats.drops++; + } pr_debug("netem: enqueue ret %d\n", ret); return ret; diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c index f849243eb09..adb1a52b77d 100644 --- a/net/sched/sch_prio.c +++ b/net/sched/sch_prio.c @@ -45,7 +45,7 @@ prio_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr) switch (err) { case TC_ACT_STOLEN: case TC_ACT_QUEUED: - *qerr = NET_XMIT_SUCCESS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; case TC_ACT_SHOT: return NULL; } @@ -88,7 +88,8 @@ prio_enqueue(struct sk_buff *skb, struct Qdisc *sch) sch->q.qlen++; return NET_XMIT_SUCCESS; } - sch->qstats.drops++; + if (net_xmit_drop_count(ret)) + sch->qstats.drops++; return ret; } @@ -114,7 +115,8 @@ prio_requeue(struct sk_buff *skb, struct Qdisc* sch) sch->qstats.requeues++; return 0; } - sch->qstats.drops++; + if (net_xmit_drop_count(ret)) + sch->qstats.drops++; return NET_XMIT_DROP; } diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c index 3f2d1d7f3bb..5da05839e22 100644 --- a/net/sched/sch_red.c +++ b/net/sched/sch_red.c @@ -97,7 +97,7 @@ static int red_enqueue(struct sk_buff *skb, struct Qdisc* sch) sch->bstats.bytes += qdisc_pkt_len(skb); sch->bstats.packets++; sch->q.qlen++; - } else { + } else if (net_xmit_drop_count(ret)) { q->stats.pdrop++; sch->qstats.drops++; } diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c index 8589da66656..3a456e1b829 100644 --- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -178,7 +178,7 @@ static unsigned int sfq_classify(struct sk_buff *skb, struct Qdisc *sch, switch (result) { case TC_ACT_STOLEN: case TC_ACT_QUEUED: - *qerr = NET_XMIT_SUCCESS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_STOLEN; case TC_ACT_SHOT: return 0; } diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index b296672f763..7d3b7ff3bf0 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -135,7 +135,8 @@ static int tbf_enqueue(struct sk_buff *skb, struct Qdisc* sch) ret = qdisc_enqueue(skb, q->qdisc); if (ret != 0) { - sch->qstats.drops++; + if (net_xmit_drop_count(ret)) + sch->qstats.drops++; return ret; } -- GitLab From c27f339af90bb874a7a9c680b17abfd32d4a727b Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Mon, 4 Aug 2008 22:39:11 -0700 Subject: [PATCH 0769/1024] net_sched: Add qdisc __NET_XMIT_BYPASS flag Patrick McHardy noticed that it would be nice to handle NET_XMIT_BYPASS by NET_XMIT_SUCCESS with an internal qdisc flag __NET_XMIT_BYPASS and to remove the mapping from dev_queue_xmit(). David Miller spotted a serious bug in the first version of this patch. Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- include/net/sch_generic.h | 6 +++--- net/core/dev.c | 1 - net/sched/sch_atm.c | 2 +- net/sched/sch_cbq.c | 4 ++-- net/sched/sch_dsmark.c | 2 +- net/sched/sch_hfsc.c | 4 ++-- net/sched/sch_htb.c | 6 +++--- net/sched/sch_netem.c | 2 +- net/sched/sch_prio.c | 6 +++--- net/sched/sch_sfq.c | 6 +++--- 10 files changed, 19 insertions(+), 20 deletions(-) diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index f15b045a85e..a7abfda3e44 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -343,14 +343,14 @@ static inline unsigned int qdisc_pkt_len(struct sk_buff *skb) return qdisc_skb_cb(skb)->pkt_len; } -#ifdef CONFIG_NET_CLS_ACT -/* additional qdisc xmit flags */ +/* additional qdisc xmit flags (NET_XMIT_MASK in linux/netdevice.h) */ enum net_xmit_qdisc_t { __NET_XMIT_STOLEN = 0x00010000, + __NET_XMIT_BYPASS = 0x00020000, }; +#ifdef CONFIG_NET_CLS_ACT #define net_xmit_drop_count(e) ((e) & __NET_XMIT_STOLEN ? 0 : 1) - #else #define net_xmit_drop_count(e) (1) #endif diff --git a/net/core/dev.c b/net/core/dev.c index fc6c9881eca..01993ad74e7 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1805,7 +1805,6 @@ gso: spin_unlock(root_lock); - rc = rc == NET_XMIT_BYPASS ? NET_XMIT_SUCCESS : rc; goto out; } diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c index 27dd773481b..43d37256c15 100644 --- a/net/sched/sch_atm.c +++ b/net/sched/sch_atm.c @@ -457,7 +457,7 @@ drop: __maybe_unused return 0; } tasklet_schedule(&p->task); - return NET_XMIT_BYPASS; + return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; } /* diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index 765ae565900..4e261ce62f4 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -230,7 +230,7 @@ cbq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr) (cl = cbq_class_lookup(q, prio)) != NULL) return cl; - *qerr = NET_XMIT_BYPASS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; for (;;) { int result = 0; defmap = head->defaults; @@ -377,7 +377,7 @@ cbq_enqueue(struct sk_buff *skb, struct Qdisc *sch) q->rx_class = cl; #endif if (cl == NULL) { - if (ret == NET_XMIT_BYPASS) + if (ret & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return ret; diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c index 7170275d9f9..edd1298f85f 100644 --- a/net/sched/sch_dsmark.c +++ b/net/sched/sch_dsmark.c @@ -268,7 +268,7 @@ static int dsmark_enqueue(struct sk_buff *skb, struct Qdisc *sch) drop: kfree_skb(skb); sch->qstats.drops++; - return NET_XMIT_BYPASS; + return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; } static struct sk_buff *dsmark_dequeue(struct Qdisc *sch) diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index 5cf9ae71611..c2b8d9cce3d 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1159,7 +1159,7 @@ hfsc_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr) if (cl->level == 0) return cl; - *qerr = NET_XMIT_BYPASS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; tcf = q->root.filter_list; while (tcf && (result = tc_classify(skb, tcf, &res)) >= 0) { #ifdef CONFIG_NET_CLS_ACT @@ -1578,7 +1578,7 @@ hfsc_enqueue(struct sk_buff *skb, struct Qdisc *sch) cl = hfsc_classify(skb, sch, &err); if (cl == NULL) { - if (err == NET_XMIT_BYPASS) + if (err & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return err; diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 538d79b489a..be35422711a 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -214,7 +214,7 @@ static struct htb_class *htb_classify(struct sk_buff *skb, struct Qdisc *sch, if ((cl = htb_find(skb->priority, sch)) != NULL && cl->level == 0) return cl; - *qerr = NET_XMIT_BYPASS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; tcf = q->filter_list; while (tcf && (result = tc_classify(skb, tcf, &res)) >= 0) { #ifdef CONFIG_NET_CLS_ACT @@ -567,7 +567,7 @@ static int htb_enqueue(struct sk_buff *skb, struct Qdisc *sch) } #ifdef CONFIG_NET_CLS_ACT } else if (!cl) { - if (ret == NET_XMIT_BYPASS) + if (ret & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return ret; @@ -612,7 +612,7 @@ static int htb_requeue(struct sk_buff *skb, struct Qdisc *sch) } #ifdef CONFIG_NET_CLS_ACT } else if (!cl) { - if (ret == NET_XMIT_BYPASS) + if (ret & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return ret; diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index 6cd6f2bc749..fb0294d0b55 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -176,7 +176,7 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch) if (count == 0) { sch->qstats.drops++; kfree_skb(skb); - return NET_XMIT_BYPASS; + return NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; } skb_orphan(skb); diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c index adb1a52b77d..eac197610ed 100644 --- a/net/sched/sch_prio.c +++ b/net/sched/sch_prio.c @@ -38,7 +38,7 @@ prio_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr) struct tcf_result res; int err; - *qerr = NET_XMIT_BYPASS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; if (TC_H_MAJ(skb->priority) != sch->handle) { err = tc_classify(skb, q->filter_list, &res); #ifdef CONFIG_NET_CLS_ACT @@ -74,7 +74,7 @@ prio_enqueue(struct sk_buff *skb, struct Qdisc *sch) #ifdef CONFIG_NET_CLS_ACT if (qdisc == NULL) { - if (ret == NET_XMIT_BYPASS) + if (ret & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return ret; @@ -103,7 +103,7 @@ prio_requeue(struct sk_buff *skb, struct Qdisc* sch) qdisc = prio_classify(skb, sch, &ret); #ifdef CONFIG_NET_CLS_ACT if (qdisc == NULL) { - if (ret == NET_XMIT_BYPASS) + if (ret & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return ret; diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c index 3a456e1b829..6e041d10dbd 100644 --- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -171,7 +171,7 @@ static unsigned int sfq_classify(struct sk_buff *skb, struct Qdisc *sch, if (!q->filter_list) return sfq_hash(q, skb) + 1; - *qerr = NET_XMIT_BYPASS; + *qerr = NET_XMIT_SUCCESS | __NET_XMIT_BYPASS; result = tc_classify(skb, q->filter_list, &res); if (result >= 0) { #ifdef CONFIG_NET_CLS_ACT @@ -285,7 +285,7 @@ sfq_enqueue(struct sk_buff *skb, struct Qdisc *sch) hash = sfq_classify(skb, sch, &ret); if (hash == 0) { - if (ret == NET_XMIT_BYPASS) + if (ret & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return ret; @@ -339,7 +339,7 @@ sfq_requeue(struct sk_buff *skb, struct Qdisc *sch) hash = sfq_classify(skb, sch, &ret); if (hash == 0) { - if (ret == NET_XMIT_BYPASS) + if (ret & __NET_XMIT_BYPASS) sch->qstats.drops++; kfree_skb(skb); return ret; -- GitLab From cc6533e98a7f3cb7fce9d740da49195c7aa523a4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Aug 2008 23:04:08 -0700 Subject: [PATCH 0770/1024] net: Kill plain NET_XMIT_BYPASS. dst_input() was doing something completely absurd, looping on skb->dst->input() if NET_XMIT_BYPASS was seen, but these functions never return such an error. And as a result plain ole' NET_XMIT_BYPASS has no more references and can be completely killed off. Signed-off-by: David S. Miller --- include/linux/netdevice.h | 3 --- include/net/dst.h | 12 +----------- 2 files changed, 1 insertion(+), 14 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index abbf5d52ec8..488c56e649b 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -61,9 +61,6 @@ struct wireless_dev; #define NET_XMIT_DROP 1 /* skb dropped */ #define NET_XMIT_CN 2 /* congestion notification */ #define NET_XMIT_POLICED 3 /* skb is shot by police */ -#define NET_XMIT_BYPASS 4 /* packet does not leave via dequeue; - (TC use only - dev_queue_xmit - returns this as NET_XMIT_SUCCESS) */ #define NET_XMIT_MASK 0xFFFF /* qdisc flags in net/sch_generic.h */ /* Backlog congestion levels */ diff --git a/include/net/dst.h b/include/net/dst.h index c5c318a628f..8a8b71e5f3f 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -252,17 +252,7 @@ static inline int dst_output(struct sk_buff *skb) /* Input packet from network to transport. */ static inline int dst_input(struct sk_buff *skb) { - int err; - - for (;;) { - err = skb->dst->input(skb); - - if (likely(err == 0)) - return err; - /* Oh, Jamal... Seems, I will not forgive you this mess. :-) */ - if (unlikely(err != NET_XMIT_BYPASS)) - return err; - } + return skb->dst->input(skb); } static inline struct dst_entry *dst_check(struct dst_entry *dst, u32 cookie) -- GitLab From 2f751b67a8be698cec52f786910ef4f0beffe9a7 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 4 Aug 2008 23:17:34 -0700 Subject: [PATCH 0771/1024] tg3: Fix 'scheduling while atomic' errors This patch fixes the 'scheduling while atomic' errors introduced by commit 12dac0756d357325b107fe6ec24921ec38661839 ("tg3: adapt tg3 to use reworked PCI PM code"). The first hunk of the patch removes an unnecessary tg3_set_power_state() call. The chip will already be in the D0 state either due to a chip reset or through a previous call to tg3_set_power_state(). The second hunk of the patch moves the tg3_set_power_state() call outside the critical section guarded by tg3_full_lock() and tg3_full_unlock() functions. The power state of the device is and should be outside the lock's domain and all other tg3_set_power_state() calls support this. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 26aa37aa531..d2439b85a79 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7687,21 +7687,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) */ static int tg3_init_hw(struct tg3 *tp, int reset_phy) { - int err; - - /* Force the chip into D0. */ - err = tg3_set_power_state(tp, PCI_D0); - if (err) - goto out; - tg3_switch_clocks(tp); tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0); - err = tg3_reset_hw(tp, reset_phy); - -out: - return err; + return tg3_reset_hw(tp, reset_phy); } #define TG3_STAT_ADD32(PSTAT, REG) \ @@ -8016,13 +8006,11 @@ static int tg3_open(struct net_device *dev) netif_carrier_off(tp->dev); - tg3_full_lock(tp, 0); - err = tg3_set_power_state(tp, PCI_D0); - if (err) { - tg3_full_unlock(tp); + if (err) return err; - } + + tg3_full_lock(tp, 0); tg3_disable_ints(tp); tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE; -- GitLab From 95c3e8bfcdea8676e2d4d61910c379f4502049bf Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Tue, 5 Aug 2008 01:19:50 -0700 Subject: [PATCH 0772/1024] ipv4: remove unused field in struct flowi (include/net/flow.h). This patch removes an unused field (flags) from struct flowi; it seems that this "flags" field was used once in the past for multipath routing with FLOWI_FLAG_MULTIPATHOLDROUTE flag (which does no longer exist); however, the "flags" field of struct flowi is not used anymore. Signed-off-by: Rami Rosen Signed-off-by: David S. Miller --- include/net/flow.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/net/flow.h b/include/net/flow.h index ad16e0076c8..228b2477cee 100644 --- a/include/net/flow.h +++ b/include/net/flow.h @@ -47,7 +47,6 @@ struct flowi { #define fl4_scope nl_u.ip4_u.scope __u8 proto; - __u8 flags; union { struct { __be16 sport; -- GitLab From ad619800e4e034cad44299b2a22df9eebb043ac3 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Tue, 5 Aug 2008 01:21:22 -0700 Subject: [PATCH 0773/1024] bridge: fix compile warning in net/bridge/br_netfilter.c This patch fixes the following warning due to incompatible pointer assignment: net/bridge/br_netfilter.c: In function 'br_netfilter_rtable_init': net/bridge/br_netfilter.c:116: warning: assignment from incompatible pointer type This warning is due to commit 4adf0af6818f3ea52421dc0bae836cfaf20ef72a from July 30 (send correct MTU value in PMTU (revised)). Signed-off-by: Rami Rosen Signed-off-by: David S. Miller --- net/bridge/br_netfilter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index 6e280a8a31e..6a9a6cd74b1 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -113,7 +113,7 @@ void br_netfilter_rtable_init(struct net_bridge *br) struct rtable *rt = &br->fake_rtable; atomic_set(&rt->u.dst.__refcnt, 1); - rt->u.dst.dev = &br->dev; + rt->u.dst.dev = br->dev; rt->u.dst.path = &rt->u.dst; rt->u.dst.metrics[RTAX_MTU - 1] = 1500; rt->u.dst.flags = DST_NOXFRM; -- GitLab From 84db8d7cdb072866f5a6c6ac2c9a74c5c48dd22f Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 5 Aug 2008 13:35:07 +0200 Subject: [PATCH 0774/1024] avr32: Move include/asm-avr32 to arch/avr32/include/asm Leaving include/asm/arch alone for now. Signed-off-by: Haavard Skinnemoen --- {include/asm-avr32 => arch/avr32/include/asm}/Kbuild | 0 {include/asm-avr32 => arch/avr32/include/asm}/a.out.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/addrspace.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/asm.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/atmel-mci.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/atomic.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/auxvec.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/bitops.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/bug.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/bugs.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/byteorder.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/cache.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/cachectl.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/cacheflush.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/checksum.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/cputime.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/current.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/delay.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/device.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/div64.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/dma-mapping.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/dma.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/elf.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/emergency-restart.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/errno.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/fb.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/fcntl.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/futex.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/gpio.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/hardirq.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/hw_irq.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/io.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/ioctl.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/ioctls.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/ipcbuf.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/irq.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/irq_regs.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/irqflags.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/kdebug.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/kmap_types.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/kprobes.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/linkage.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/local.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/mach/serial_at91.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/mman.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/mmu.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/mmu_context.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/module.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/msgbuf.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/mutex.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/numnodes.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/ocd.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/page.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/param.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/pci.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/percpu.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/pgalloc.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/pgtable-2level.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/pgtable.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/poll.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/posix_types.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/processor.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/ptrace.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/resource.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/scatterlist.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/sections.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/sembuf.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/serial.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/setup.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/shmbuf.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/shmparam.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/sigcontext.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/siginfo.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/signal.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/socket.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/sockios.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/stat.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/statfs.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/string.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/sysreg.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/system.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/termbits.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/termios.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/thread_info.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/timex.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/tlb.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/tlbflush.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/topology.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/traps.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/types.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/uaccess.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/ucontext.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/unaligned.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/unistd.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/user.h | 0 {include/asm-avr32 => arch/avr32/include/asm}/xor.h | 0 96 files changed, 0 insertions(+), 0 deletions(-) rename {include/asm-avr32 => arch/avr32/include/asm}/Kbuild (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/a.out.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/addrspace.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/asm.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/atmel-mci.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/atomic.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/auxvec.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/bitops.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/bug.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/bugs.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/byteorder.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/cache.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/cachectl.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/cacheflush.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/checksum.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/cputime.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/current.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/delay.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/device.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/div64.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/dma-mapping.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/dma.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/elf.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/emergency-restart.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/errno.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/fb.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/fcntl.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/futex.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/gpio.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/hardirq.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/hw_irq.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/io.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/ioctl.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/ioctls.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/ipcbuf.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/irq.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/irq_regs.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/irqflags.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/kdebug.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/kmap_types.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/kprobes.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/linkage.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/local.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/mach/serial_at91.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/mman.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/mmu.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/mmu_context.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/module.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/msgbuf.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/mutex.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/numnodes.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/ocd.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/page.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/param.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/pci.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/percpu.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/pgalloc.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/pgtable-2level.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/pgtable.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/poll.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/posix_types.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/processor.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/ptrace.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/resource.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/scatterlist.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/sections.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/sembuf.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/serial.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/setup.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/shmbuf.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/shmparam.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/sigcontext.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/siginfo.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/signal.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/socket.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/sockios.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/stat.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/statfs.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/string.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/sysreg.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/system.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/termbits.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/termios.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/thread_info.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/timex.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/tlb.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/tlbflush.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/topology.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/traps.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/types.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/uaccess.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/ucontext.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/unaligned.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/unistd.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/user.h (100%) rename {include/asm-avr32 => arch/avr32/include/asm}/xor.h (100%) diff --git a/include/asm-avr32/Kbuild b/arch/avr32/include/asm/Kbuild similarity index 100% rename from include/asm-avr32/Kbuild rename to arch/avr32/include/asm/Kbuild diff --git a/include/asm-avr32/a.out.h b/arch/avr32/include/asm/a.out.h similarity index 100% rename from include/asm-avr32/a.out.h rename to arch/avr32/include/asm/a.out.h diff --git a/include/asm-avr32/addrspace.h b/arch/avr32/include/asm/addrspace.h similarity index 100% rename from include/asm-avr32/addrspace.h rename to arch/avr32/include/asm/addrspace.h diff --git a/include/asm-avr32/asm.h b/arch/avr32/include/asm/asm.h similarity index 100% rename from include/asm-avr32/asm.h rename to arch/avr32/include/asm/asm.h diff --git a/include/asm-avr32/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h similarity index 100% rename from include/asm-avr32/atmel-mci.h rename to arch/avr32/include/asm/atmel-mci.h diff --git a/include/asm-avr32/atomic.h b/arch/avr32/include/asm/atomic.h similarity index 100% rename from include/asm-avr32/atomic.h rename to arch/avr32/include/asm/atomic.h diff --git a/include/asm-avr32/auxvec.h b/arch/avr32/include/asm/auxvec.h similarity index 100% rename from include/asm-avr32/auxvec.h rename to arch/avr32/include/asm/auxvec.h diff --git a/include/asm-avr32/bitops.h b/arch/avr32/include/asm/bitops.h similarity index 100% rename from include/asm-avr32/bitops.h rename to arch/avr32/include/asm/bitops.h diff --git a/include/asm-avr32/bug.h b/arch/avr32/include/asm/bug.h similarity index 100% rename from include/asm-avr32/bug.h rename to arch/avr32/include/asm/bug.h diff --git a/include/asm-avr32/bugs.h b/arch/avr32/include/asm/bugs.h similarity index 100% rename from include/asm-avr32/bugs.h rename to arch/avr32/include/asm/bugs.h diff --git a/include/asm-avr32/byteorder.h b/arch/avr32/include/asm/byteorder.h similarity index 100% rename from include/asm-avr32/byteorder.h rename to arch/avr32/include/asm/byteorder.h diff --git a/include/asm-avr32/cache.h b/arch/avr32/include/asm/cache.h similarity index 100% rename from include/asm-avr32/cache.h rename to arch/avr32/include/asm/cache.h diff --git a/include/asm-avr32/cachectl.h b/arch/avr32/include/asm/cachectl.h similarity index 100% rename from include/asm-avr32/cachectl.h rename to arch/avr32/include/asm/cachectl.h diff --git a/include/asm-avr32/cacheflush.h b/arch/avr32/include/asm/cacheflush.h similarity index 100% rename from include/asm-avr32/cacheflush.h rename to arch/avr32/include/asm/cacheflush.h diff --git a/include/asm-avr32/checksum.h b/arch/avr32/include/asm/checksum.h similarity index 100% rename from include/asm-avr32/checksum.h rename to arch/avr32/include/asm/checksum.h diff --git a/include/asm-avr32/cputime.h b/arch/avr32/include/asm/cputime.h similarity index 100% rename from include/asm-avr32/cputime.h rename to arch/avr32/include/asm/cputime.h diff --git a/include/asm-avr32/current.h b/arch/avr32/include/asm/current.h similarity index 100% rename from include/asm-avr32/current.h rename to arch/avr32/include/asm/current.h diff --git a/include/asm-avr32/delay.h b/arch/avr32/include/asm/delay.h similarity index 100% rename from include/asm-avr32/delay.h rename to arch/avr32/include/asm/delay.h diff --git a/include/asm-avr32/device.h b/arch/avr32/include/asm/device.h similarity index 100% rename from include/asm-avr32/device.h rename to arch/avr32/include/asm/device.h diff --git a/include/asm-avr32/div64.h b/arch/avr32/include/asm/div64.h similarity index 100% rename from include/asm-avr32/div64.h rename to arch/avr32/include/asm/div64.h diff --git a/include/asm-avr32/dma-mapping.h b/arch/avr32/include/asm/dma-mapping.h similarity index 100% rename from include/asm-avr32/dma-mapping.h rename to arch/avr32/include/asm/dma-mapping.h diff --git a/include/asm-avr32/dma.h b/arch/avr32/include/asm/dma.h similarity index 100% rename from include/asm-avr32/dma.h rename to arch/avr32/include/asm/dma.h diff --git a/include/asm-avr32/elf.h b/arch/avr32/include/asm/elf.h similarity index 100% rename from include/asm-avr32/elf.h rename to arch/avr32/include/asm/elf.h diff --git a/include/asm-avr32/emergency-restart.h b/arch/avr32/include/asm/emergency-restart.h similarity index 100% rename from include/asm-avr32/emergency-restart.h rename to arch/avr32/include/asm/emergency-restart.h diff --git a/include/asm-avr32/errno.h b/arch/avr32/include/asm/errno.h similarity index 100% rename from include/asm-avr32/errno.h rename to arch/avr32/include/asm/errno.h diff --git a/include/asm-avr32/fb.h b/arch/avr32/include/asm/fb.h similarity index 100% rename from include/asm-avr32/fb.h rename to arch/avr32/include/asm/fb.h diff --git a/include/asm-avr32/fcntl.h b/arch/avr32/include/asm/fcntl.h similarity index 100% rename from include/asm-avr32/fcntl.h rename to arch/avr32/include/asm/fcntl.h diff --git a/include/asm-avr32/futex.h b/arch/avr32/include/asm/futex.h similarity index 100% rename from include/asm-avr32/futex.h rename to arch/avr32/include/asm/futex.h diff --git a/include/asm-avr32/gpio.h b/arch/avr32/include/asm/gpio.h similarity index 100% rename from include/asm-avr32/gpio.h rename to arch/avr32/include/asm/gpio.h diff --git a/include/asm-avr32/hardirq.h b/arch/avr32/include/asm/hardirq.h similarity index 100% rename from include/asm-avr32/hardirq.h rename to arch/avr32/include/asm/hardirq.h diff --git a/include/asm-avr32/hw_irq.h b/arch/avr32/include/asm/hw_irq.h similarity index 100% rename from include/asm-avr32/hw_irq.h rename to arch/avr32/include/asm/hw_irq.h diff --git a/include/asm-avr32/io.h b/arch/avr32/include/asm/io.h similarity index 100% rename from include/asm-avr32/io.h rename to arch/avr32/include/asm/io.h diff --git a/include/asm-avr32/ioctl.h b/arch/avr32/include/asm/ioctl.h similarity index 100% rename from include/asm-avr32/ioctl.h rename to arch/avr32/include/asm/ioctl.h diff --git a/include/asm-avr32/ioctls.h b/arch/avr32/include/asm/ioctls.h similarity index 100% rename from include/asm-avr32/ioctls.h rename to arch/avr32/include/asm/ioctls.h diff --git a/include/asm-avr32/ipcbuf.h b/arch/avr32/include/asm/ipcbuf.h similarity index 100% rename from include/asm-avr32/ipcbuf.h rename to arch/avr32/include/asm/ipcbuf.h diff --git a/include/asm-avr32/irq.h b/arch/avr32/include/asm/irq.h similarity index 100% rename from include/asm-avr32/irq.h rename to arch/avr32/include/asm/irq.h diff --git a/include/asm-avr32/irq_regs.h b/arch/avr32/include/asm/irq_regs.h similarity index 100% rename from include/asm-avr32/irq_regs.h rename to arch/avr32/include/asm/irq_regs.h diff --git a/include/asm-avr32/irqflags.h b/arch/avr32/include/asm/irqflags.h similarity index 100% rename from include/asm-avr32/irqflags.h rename to arch/avr32/include/asm/irqflags.h diff --git a/include/asm-avr32/kdebug.h b/arch/avr32/include/asm/kdebug.h similarity index 100% rename from include/asm-avr32/kdebug.h rename to arch/avr32/include/asm/kdebug.h diff --git a/include/asm-avr32/kmap_types.h b/arch/avr32/include/asm/kmap_types.h similarity index 100% rename from include/asm-avr32/kmap_types.h rename to arch/avr32/include/asm/kmap_types.h diff --git a/include/asm-avr32/kprobes.h b/arch/avr32/include/asm/kprobes.h similarity index 100% rename from include/asm-avr32/kprobes.h rename to arch/avr32/include/asm/kprobes.h diff --git a/include/asm-avr32/linkage.h b/arch/avr32/include/asm/linkage.h similarity index 100% rename from include/asm-avr32/linkage.h rename to arch/avr32/include/asm/linkage.h diff --git a/include/asm-avr32/local.h b/arch/avr32/include/asm/local.h similarity index 100% rename from include/asm-avr32/local.h rename to arch/avr32/include/asm/local.h diff --git a/include/asm-avr32/mach/serial_at91.h b/arch/avr32/include/asm/mach/serial_at91.h similarity index 100% rename from include/asm-avr32/mach/serial_at91.h rename to arch/avr32/include/asm/mach/serial_at91.h diff --git a/include/asm-avr32/mman.h b/arch/avr32/include/asm/mman.h similarity index 100% rename from include/asm-avr32/mman.h rename to arch/avr32/include/asm/mman.h diff --git a/include/asm-avr32/mmu.h b/arch/avr32/include/asm/mmu.h similarity index 100% rename from include/asm-avr32/mmu.h rename to arch/avr32/include/asm/mmu.h diff --git a/include/asm-avr32/mmu_context.h b/arch/avr32/include/asm/mmu_context.h similarity index 100% rename from include/asm-avr32/mmu_context.h rename to arch/avr32/include/asm/mmu_context.h diff --git a/include/asm-avr32/module.h b/arch/avr32/include/asm/module.h similarity index 100% rename from include/asm-avr32/module.h rename to arch/avr32/include/asm/module.h diff --git a/include/asm-avr32/msgbuf.h b/arch/avr32/include/asm/msgbuf.h similarity index 100% rename from include/asm-avr32/msgbuf.h rename to arch/avr32/include/asm/msgbuf.h diff --git a/include/asm-avr32/mutex.h b/arch/avr32/include/asm/mutex.h similarity index 100% rename from include/asm-avr32/mutex.h rename to arch/avr32/include/asm/mutex.h diff --git a/include/asm-avr32/numnodes.h b/arch/avr32/include/asm/numnodes.h similarity index 100% rename from include/asm-avr32/numnodes.h rename to arch/avr32/include/asm/numnodes.h diff --git a/include/asm-avr32/ocd.h b/arch/avr32/include/asm/ocd.h similarity index 100% rename from include/asm-avr32/ocd.h rename to arch/avr32/include/asm/ocd.h diff --git a/include/asm-avr32/page.h b/arch/avr32/include/asm/page.h similarity index 100% rename from include/asm-avr32/page.h rename to arch/avr32/include/asm/page.h diff --git a/include/asm-avr32/param.h b/arch/avr32/include/asm/param.h similarity index 100% rename from include/asm-avr32/param.h rename to arch/avr32/include/asm/param.h diff --git a/include/asm-avr32/pci.h b/arch/avr32/include/asm/pci.h similarity index 100% rename from include/asm-avr32/pci.h rename to arch/avr32/include/asm/pci.h diff --git a/include/asm-avr32/percpu.h b/arch/avr32/include/asm/percpu.h similarity index 100% rename from include/asm-avr32/percpu.h rename to arch/avr32/include/asm/percpu.h diff --git a/include/asm-avr32/pgalloc.h b/arch/avr32/include/asm/pgalloc.h similarity index 100% rename from include/asm-avr32/pgalloc.h rename to arch/avr32/include/asm/pgalloc.h diff --git a/include/asm-avr32/pgtable-2level.h b/arch/avr32/include/asm/pgtable-2level.h similarity index 100% rename from include/asm-avr32/pgtable-2level.h rename to arch/avr32/include/asm/pgtable-2level.h diff --git a/include/asm-avr32/pgtable.h b/arch/avr32/include/asm/pgtable.h similarity index 100% rename from include/asm-avr32/pgtable.h rename to arch/avr32/include/asm/pgtable.h diff --git a/include/asm-avr32/poll.h b/arch/avr32/include/asm/poll.h similarity index 100% rename from include/asm-avr32/poll.h rename to arch/avr32/include/asm/poll.h diff --git a/include/asm-avr32/posix_types.h b/arch/avr32/include/asm/posix_types.h similarity index 100% rename from include/asm-avr32/posix_types.h rename to arch/avr32/include/asm/posix_types.h diff --git a/include/asm-avr32/processor.h b/arch/avr32/include/asm/processor.h similarity index 100% rename from include/asm-avr32/processor.h rename to arch/avr32/include/asm/processor.h diff --git a/include/asm-avr32/ptrace.h b/arch/avr32/include/asm/ptrace.h similarity index 100% rename from include/asm-avr32/ptrace.h rename to arch/avr32/include/asm/ptrace.h diff --git a/include/asm-avr32/resource.h b/arch/avr32/include/asm/resource.h similarity index 100% rename from include/asm-avr32/resource.h rename to arch/avr32/include/asm/resource.h diff --git a/include/asm-avr32/scatterlist.h b/arch/avr32/include/asm/scatterlist.h similarity index 100% rename from include/asm-avr32/scatterlist.h rename to arch/avr32/include/asm/scatterlist.h diff --git a/include/asm-avr32/sections.h b/arch/avr32/include/asm/sections.h similarity index 100% rename from include/asm-avr32/sections.h rename to arch/avr32/include/asm/sections.h diff --git a/include/asm-avr32/sembuf.h b/arch/avr32/include/asm/sembuf.h similarity index 100% rename from include/asm-avr32/sembuf.h rename to arch/avr32/include/asm/sembuf.h diff --git a/include/asm-avr32/serial.h b/arch/avr32/include/asm/serial.h similarity index 100% rename from include/asm-avr32/serial.h rename to arch/avr32/include/asm/serial.h diff --git a/include/asm-avr32/setup.h b/arch/avr32/include/asm/setup.h similarity index 100% rename from include/asm-avr32/setup.h rename to arch/avr32/include/asm/setup.h diff --git a/include/asm-avr32/shmbuf.h b/arch/avr32/include/asm/shmbuf.h similarity index 100% rename from include/asm-avr32/shmbuf.h rename to arch/avr32/include/asm/shmbuf.h diff --git a/include/asm-avr32/shmparam.h b/arch/avr32/include/asm/shmparam.h similarity index 100% rename from include/asm-avr32/shmparam.h rename to arch/avr32/include/asm/shmparam.h diff --git a/include/asm-avr32/sigcontext.h b/arch/avr32/include/asm/sigcontext.h similarity index 100% rename from include/asm-avr32/sigcontext.h rename to arch/avr32/include/asm/sigcontext.h diff --git a/include/asm-avr32/siginfo.h b/arch/avr32/include/asm/siginfo.h similarity index 100% rename from include/asm-avr32/siginfo.h rename to arch/avr32/include/asm/siginfo.h diff --git a/include/asm-avr32/signal.h b/arch/avr32/include/asm/signal.h similarity index 100% rename from include/asm-avr32/signal.h rename to arch/avr32/include/asm/signal.h diff --git a/include/asm-avr32/socket.h b/arch/avr32/include/asm/socket.h similarity index 100% rename from include/asm-avr32/socket.h rename to arch/avr32/include/asm/socket.h diff --git a/include/asm-avr32/sockios.h b/arch/avr32/include/asm/sockios.h similarity index 100% rename from include/asm-avr32/sockios.h rename to arch/avr32/include/asm/sockios.h diff --git a/include/asm-avr32/stat.h b/arch/avr32/include/asm/stat.h similarity index 100% rename from include/asm-avr32/stat.h rename to arch/avr32/include/asm/stat.h diff --git a/include/asm-avr32/statfs.h b/arch/avr32/include/asm/statfs.h similarity index 100% rename from include/asm-avr32/statfs.h rename to arch/avr32/include/asm/statfs.h diff --git a/include/asm-avr32/string.h b/arch/avr32/include/asm/string.h similarity index 100% rename from include/asm-avr32/string.h rename to arch/avr32/include/asm/string.h diff --git a/include/asm-avr32/sysreg.h b/arch/avr32/include/asm/sysreg.h similarity index 100% rename from include/asm-avr32/sysreg.h rename to arch/avr32/include/asm/sysreg.h diff --git a/include/asm-avr32/system.h b/arch/avr32/include/asm/system.h similarity index 100% rename from include/asm-avr32/system.h rename to arch/avr32/include/asm/system.h diff --git a/include/asm-avr32/termbits.h b/arch/avr32/include/asm/termbits.h similarity index 100% rename from include/asm-avr32/termbits.h rename to arch/avr32/include/asm/termbits.h diff --git a/include/asm-avr32/termios.h b/arch/avr32/include/asm/termios.h similarity index 100% rename from include/asm-avr32/termios.h rename to arch/avr32/include/asm/termios.h diff --git a/include/asm-avr32/thread_info.h b/arch/avr32/include/asm/thread_info.h similarity index 100% rename from include/asm-avr32/thread_info.h rename to arch/avr32/include/asm/thread_info.h diff --git a/include/asm-avr32/timex.h b/arch/avr32/include/asm/timex.h similarity index 100% rename from include/asm-avr32/timex.h rename to arch/avr32/include/asm/timex.h diff --git a/include/asm-avr32/tlb.h b/arch/avr32/include/asm/tlb.h similarity index 100% rename from include/asm-avr32/tlb.h rename to arch/avr32/include/asm/tlb.h diff --git a/include/asm-avr32/tlbflush.h b/arch/avr32/include/asm/tlbflush.h similarity index 100% rename from include/asm-avr32/tlbflush.h rename to arch/avr32/include/asm/tlbflush.h diff --git a/include/asm-avr32/topology.h b/arch/avr32/include/asm/topology.h similarity index 100% rename from include/asm-avr32/topology.h rename to arch/avr32/include/asm/topology.h diff --git a/include/asm-avr32/traps.h b/arch/avr32/include/asm/traps.h similarity index 100% rename from include/asm-avr32/traps.h rename to arch/avr32/include/asm/traps.h diff --git a/include/asm-avr32/types.h b/arch/avr32/include/asm/types.h similarity index 100% rename from include/asm-avr32/types.h rename to arch/avr32/include/asm/types.h diff --git a/include/asm-avr32/uaccess.h b/arch/avr32/include/asm/uaccess.h similarity index 100% rename from include/asm-avr32/uaccess.h rename to arch/avr32/include/asm/uaccess.h diff --git a/include/asm-avr32/ucontext.h b/arch/avr32/include/asm/ucontext.h similarity index 100% rename from include/asm-avr32/ucontext.h rename to arch/avr32/include/asm/ucontext.h diff --git a/include/asm-avr32/unaligned.h b/arch/avr32/include/asm/unaligned.h similarity index 100% rename from include/asm-avr32/unaligned.h rename to arch/avr32/include/asm/unaligned.h diff --git a/include/asm-avr32/unistd.h b/arch/avr32/include/asm/unistd.h similarity index 100% rename from include/asm-avr32/unistd.h rename to arch/avr32/include/asm/unistd.h diff --git a/include/asm-avr32/user.h b/arch/avr32/include/asm/user.h similarity index 100% rename from include/asm-avr32/user.h rename to arch/avr32/include/asm/user.h diff --git a/include/asm-avr32/xor.h b/arch/avr32/include/asm/xor.h similarity index 100% rename from include/asm-avr32/xor.h rename to arch/avr32/include/asm/xor.h -- GitLab From 964d219b6a8a79ea4c8d77b6dcdcbbcda403c392 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 5 Aug 2008 13:49:09 +0200 Subject: [PATCH 0775/1024] avr32: Introduce arch/avr32/mach-*/include/mach Add arch/avr32/mach-*/include to include search path and copy all the files from include/asm/arch there. The old files will be removed once ARM does the same change and all common drivers are converted. Signed-off-by: Haavard Skinnemoen --- arch/avr32/Makefile | 7 +- .../mach-at32ap/include/mach/at32ap700x.h | 49 +++++++ arch/avr32/mach-at32ap/include/mach/board.h | 121 ++++++++++++++++++ arch/avr32/mach-at32ap/include/mach/cpu.h | 35 +++++ arch/avr32/mach-at32ap/include/mach/gpio.h | 45 +++++++ arch/avr32/mach-at32ap/include/mach/init.h | 18 +++ arch/avr32/mach-at32ap/include/mach/io.h | 39 ++++++ arch/avr32/mach-at32ap/include/mach/irq.h | 14 ++ arch/avr32/mach-at32ap/include/mach/pm.h | 51 ++++++++ arch/avr32/mach-at32ap/include/mach/portmux.h | 29 +++++ arch/avr32/mach-at32ap/include/mach/smc.h | 113 ++++++++++++++++ arch/avr32/mach-at32ap/include/mach/sram.h | 30 +++++ 12 files changed, 550 insertions(+), 1 deletion(-) create mode 100644 arch/avr32/mach-at32ap/include/mach/at32ap700x.h create mode 100644 arch/avr32/mach-at32ap/include/mach/board.h create mode 100644 arch/avr32/mach-at32ap/include/mach/cpu.h create mode 100644 arch/avr32/mach-at32ap/include/mach/gpio.h create mode 100644 arch/avr32/mach-at32ap/include/mach/init.h create mode 100644 arch/avr32/mach-at32ap/include/mach/io.h create mode 100644 arch/avr32/mach-at32ap/include/mach/irq.h create mode 100644 arch/avr32/mach-at32ap/include/mach/pm.h create mode 100644 arch/avr32/mach-at32ap/include/mach/portmux.h create mode 100644 arch/avr32/mach-at32ap/include/mach/smc.h create mode 100644 arch/avr32/mach-at32ap/include/mach/sram.h diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index 17a3529341d..5b46433d53a 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -23,9 +23,14 @@ KBUILD_AFLAGS += $(cpuflags-y) CHECKFLAGS += -D__avr32__ -D__BIG_ENDIAN +machine-$(CONFIG_PLATFORM_AT32AP) := at32ap +machdirs := $(patsubst %,arch/avr32/mach-%/, $(machine-y)) + +KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs)) + head-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/head.o head-y += arch/avr32/kernel/head.o -core-$(CONFIG_PLATFORM_AT32AP) += arch/avr32/mach-at32ap/ +core-y += $(machdirs) core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/ core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/ core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h new file mode 100644 index 00000000000..d18a3053be0 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h @@ -0,0 +1,49 @@ +/* + * Pin definitions for AT32AP7000. + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_AT32AP700X_H__ +#define __ASM_ARCH_AT32AP700X_H__ + +#define GPIO_PERIPH_A 0 +#define GPIO_PERIPH_B 1 + +/* + * Pin numbers identifying specific GPIO pins on the chip. They can + * also be converted to IRQ numbers by passing them through + * gpio_to_irq(). + */ +#define GPIO_PIOA_BASE (0) +#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32) +#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32) +#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32) +#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32) + +#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N)) +#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N)) +#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N)) +#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N)) +#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N)) + + +/* + * DMAC peripheral hardware handshaking interfaces, used with dw_dmac + */ +#define DMAC_MCI_RX 0 +#define DMAC_MCI_TX 1 +#define DMAC_DAC_TX 2 +#define DMAC_AC97_A_RX 3 +#define DMAC_AC97_A_TX 4 +#define DMAC_AC97_B_RX 5 +#define DMAC_AC97_B_TX 6 +#define DMAC_DMAREQ_0 7 +#define DMAC_DMAREQ_1 8 +#define DMAC_DMAREQ_2 9 +#define DMAC_DMAREQ_3 10 + +#endif /* __ASM_ARCH_AT32AP700X_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h new file mode 100644 index 00000000000..e60e9076544 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -0,0 +1,121 @@ +/* + * Platform data definitions. + */ +#ifndef __ASM_ARCH_BOARD_H +#define __ASM_ARCH_BOARD_H + +#include + +#define GPIO_PIN_NONE (-1) + +/* + * Clock rates for various on-board oscillators. The number of entries + * in this array is chip-dependent. + */ +extern unsigned long at32_board_osc_rates[]; + +/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */ +void at32_add_system_devices(void); + +#define ATMEL_MAX_UART 4 +extern struct platform_device *atmel_default_console_device; + +struct atmel_uart_data { + short use_dma_tx; /* use transmit DMA? */ + short use_dma_rx; /* use receive DMA? */ + void __iomem *regs; /* virtual base address, if any */ +}; +void at32_map_usart(unsigned int hw_id, unsigned int line); +struct platform_device *at32_add_device_usart(unsigned int id); + +struct eth_platform_data { + u32 phy_mask; + u8 is_rmii; +}; +struct platform_device * +at32_add_device_eth(unsigned int id, struct eth_platform_data *data); + +struct spi_board_info; +struct platform_device * +at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n); + +struct atmel_lcdfb_info; +struct platform_device * +at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, + unsigned long fbmem_start, unsigned long fbmem_len, + unsigned int pin_config); + +struct usba_platform_data; +struct platform_device * +at32_add_device_usba(unsigned int id, struct usba_platform_data *data); + +struct ide_platform_data { + u8 cs; +}; +struct platform_device * +at32_add_device_ide(unsigned int id, unsigned int extint, + struct ide_platform_data *data); + +/* mask says which PWM channels to mux */ +struct platform_device *at32_add_device_pwm(u32 mask); + +/* depending on what's hooked up, not all SSC pins will be used */ +#define ATMEL_SSC_TK 0x01 +#define ATMEL_SSC_TF 0x02 +#define ATMEL_SSC_TD 0x04 +#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD) + +#define ATMEL_SSC_RK 0x10 +#define ATMEL_SSC_RF 0x20 +#define ATMEL_SSC_RD 0x40 +#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD) + +struct platform_device * +at32_add_device_ssc(unsigned int id, unsigned int flags); + +struct i2c_board_info; +struct platform_device *at32_add_device_twi(unsigned int id, + struct i2c_board_info *b, + unsigned int n); + +struct mci_platform_data; +struct platform_device * +at32_add_device_mci(unsigned int id, struct mci_platform_data *data); + +struct ac97c_platform_data { + unsigned short dma_rx_periph_id; + unsigned short dma_tx_periph_id; + unsigned short dma_controller_id; + int reset_pin; +}; +struct platform_device * +at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data); + +struct platform_device *at32_add_device_abdac(unsigned int id); +struct platform_device *at32_add_device_psif(unsigned int id); + +struct cf_platform_data { + int detect_pin; + int reset_pin; + int vcc_pin; + int ready_pin; + u8 cs; +}; +struct platform_device * +at32_add_device_cf(unsigned int id, unsigned int extint, + struct cf_platform_data *data); + +/* NAND / SmartMedia */ +struct atmel_nand_data { + int enable_pin; /* chip enable */ + int det_pin; /* card detect */ + int rdy_pin; /* ready/busy */ + u8 ale; /* address line number connected to ALE */ + u8 cle; /* address line number connected to CLE */ + u8 bus_width_16; /* buswidth is 16 bit */ + struct mtd_partition *(*partition_info)(int size, int *num_partitions); +}; +struct platform_device * +at32_add_device_nand(unsigned int id, struct atmel_nand_data *data); + +#endif /* __ASM_ARCH_BOARD_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h new file mode 100644 index 00000000000..44d0bfa1f40 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/cpu.h @@ -0,0 +1,35 @@ +/* + * AVR32 and (fake) AT91 CPU identification + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_CPU_H +#define __ASM_ARCH_CPU_H + +/* + * Only AT32AP7000 is defined for now. We can identify the specific + * chip at runtime, but I'm not sure if it's really worth it. + */ +#ifdef CONFIG_CPU_AT32AP700X +# define cpu_is_at32ap7000() (1) +#else +# define cpu_is_at32ap7000() (0) +#endif + +/* + * Since this is AVR32, we will never run on any AT91 CPU. But these + * definitions may reduce clutter in common drivers. + */ +#define cpu_is_at91rm9200() (0) +#define cpu_is_at91sam9xe() (0) +#define cpu_is_at91sam9260() (0) +#define cpu_is_at91sam9261() (0) +#define cpu_is_at91sam9263() (0) +#define cpu_is_at91sam9rl() (0) +#define cpu_is_at91cap9() (0) + +#endif /* __ASM_ARCH_CPU_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/gpio.h b/arch/avr32/mach-at32ap/include/mach/gpio.h new file mode 100644 index 00000000000..0180f584ef0 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/gpio.h @@ -0,0 +1,45 @@ +#ifndef __ASM_AVR32_ARCH_GPIO_H +#define __ASM_AVR32_ARCH_GPIO_H + +#include +#include + + +/* Some GPIO chips can manage IRQs; some can't. The exact numbers can + * be changed if needed, but for the moment they're not configurable. + */ +#define ARCH_NR_GPIOS (NR_GPIO_IRQS + 2 * 32) + + +/* Arch-neutral GPIO API, supporting both "native" and external GPIOs. */ +#include + +static inline int gpio_get_value(unsigned int gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return __gpio_cansleep(gpio); +} + + +static inline int gpio_to_irq(unsigned int gpio) +{ + if (gpio < NR_GPIO_IRQS) + return gpio + GPIO_IRQ_BASE; + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return irq - GPIO_IRQ_BASE; +} + +#endif /* __ASM_AVR32_ARCH_GPIO_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/init.h b/arch/avr32/mach-at32ap/include/mach/init.h new file mode 100644 index 00000000000..bc40e3d4615 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/init.h @@ -0,0 +1,18 @@ +/* + * AT32AP platform initialization calls. + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_AT32AP_INIT_H__ +#define __ASM_AVR32_AT32AP_INIT_H__ + +void setup_platform(void); +void setup_board(void); + +void at32_setup_serial_console(unsigned int usart_id); + +#endif /* __ASM_AVR32_AT32AP_INIT_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/io.h b/arch/avr32/mach-at32ap/include/mach/io.h new file mode 100644 index 00000000000..4ec6abc68ea --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/io.h @@ -0,0 +1,39 @@ +#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H +#define __ASM_AVR32_ARCH_AT32AP_IO_H + +/* For "bizarre" halfword swapping */ +#include + +#if defined(CONFIG_AP700X_32_BIT_SMC) +# define __swizzle_addr_b(addr) (addr ^ 3UL) +# define __swizzle_addr_w(addr) (addr ^ 2UL) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define ioswabl(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) swab16(x) +# define __mem_ioswabl(a, x) swab32(x) +#elif defined(CONFIG_AP700X_16_BIT_SMC) +# define __swizzle_addr_b(addr) (addr ^ 1UL) +# define __swizzle_addr_w(addr) (addr) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define ioswabl(a, x) swahw32(x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) swab16(x) +# define __mem_ioswabl(a, x) swahb32(x) +#else +# define __swizzle_addr_b(addr) (addr) +# define __swizzle_addr_w(addr) (addr) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) swab16(x) +# define ioswabl(a, x) swab32(x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) (x) +# define __mem_ioswabl(a, x) (x) +#endif + +#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/irq.h b/arch/avr32/mach-at32ap/include/mach/irq.h new file mode 100644 index 00000000000..608e350368c --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/irq.h @@ -0,0 +1,14 @@ +#ifndef __ASM_AVR32_ARCH_IRQ_H +#define __ASM_AVR32_ARCH_IRQ_H + +#define EIM_IRQ_BASE NR_INTERNAL_IRQS +#define NR_EIM_IRQS 32 +#define AT32_EXTINT(n) (EIM_IRQ_BASE + (n)) + +#define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS) +#define NR_GPIO_CTLR (5 /*internal*/ + 1 /*external*/) +#define NR_GPIO_IRQS (NR_GPIO_CTLR * 32) + +#define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS) + +#endif /* __ASM_AVR32_ARCH_IRQ_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/pm.h b/arch/avr32/mach-at32ap/include/mach/pm.h new file mode 100644 index 00000000000..979b355b77b --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/pm.h @@ -0,0 +1,51 @@ +/* + * AVR32 AP Power Management. + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ARCH_PM_H +#define __ASM_AVR32_ARCH_PM_H + +/* Possible arguments to the "sleep" instruction */ +#define CPU_SLEEP_IDLE 0 +#define CPU_SLEEP_FROZEN 1 +#define CPU_SLEEP_STANDBY 2 +#define CPU_SLEEP_STOP 3 +#define CPU_SLEEP_STATIC 5 + +#ifndef __ASSEMBLY__ +extern void cpu_enter_idle(void); +extern void cpu_enter_standby(unsigned long sdramc_base); + +extern bool disable_idle_sleep; + +static inline void cpu_disable_idle_sleep(void) +{ + disable_idle_sleep = true; +} + +static inline void cpu_enable_idle_sleep(void) +{ + disable_idle_sleep = false; +} + +static inline void cpu_idle_sleep(void) +{ + /* + * If we're using the COUNT and COMPARE registers for + * timekeeping, we can't use the IDLE state. + */ + if (disable_idle_sleep) + cpu_relax(); + else + cpu_enter_idle(); +} + +void intc_set_suspend_handler(unsigned long offset); +#endif + +#endif /* __ASM_AVR32_ARCH_PM_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h new file mode 100644 index 00000000000..b1abe6b4e4e --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/portmux.h @@ -0,0 +1,29 @@ +/* + * AT32 portmux interface. + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_PORTMUX_H__ +#define __ASM_ARCH_PORTMUX_H__ + +/* + * Set up pin multiplexing, called from board init only. + * + * The following flags determine the initial state of the pin. + */ +#define AT32_GPIOF_PULLUP 0x00000001 /* (not-OUT) Enable pull-up */ +#define AT32_GPIOF_OUTPUT 0x00000002 /* (OUT) Enable output driver */ +#define AT32_GPIOF_HIGH 0x00000004 /* (OUT) Set output high */ +#define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */ +#define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */ + +void at32_select_periph(unsigned int pin, unsigned int periph, + unsigned long flags); +void at32_select_gpio(unsigned int pin, unsigned long flags); +void at32_reserve_pin(unsigned int pin); + +#endif /* __ASM_ARCH_PORTMUX_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/smc.h b/arch/avr32/mach-at32ap/include/mach/smc.h new file mode 100644 index 00000000000..c98eea44a70 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/smc.h @@ -0,0 +1,113 @@ +/* + * Static Memory Controller for AT32 chips + * + * Copyright (C) 2006 Atmel Corporation + * + * Inspired by the OMAP2 General-Purpose Memory Controller interface + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ARCH_AT32AP_SMC_H +#define __ARCH_AT32AP_SMC_H + +/* + * All timing parameters are in nanoseconds. + */ +struct smc_timing { + /* Delay from address valid to assertion of given strobe */ + int ncs_read_setup; + int nrd_setup; + int ncs_write_setup; + int nwe_setup; + + /* Pulse length of given strobe */ + int ncs_read_pulse; + int nrd_pulse; + int ncs_write_pulse; + int nwe_pulse; + + /* Total cycle length of given operation */ + int read_cycle; + int write_cycle; + + /* Minimal recovery times, will extend cycle if needed */ + int ncs_read_recover; + int nrd_recover; + int ncs_write_recover; + int nwe_recover; +}; + +/* + * All timing parameters are in clock cycles. + */ +struct smc_config { + + /* Delay from address valid to assertion of given strobe */ + u8 ncs_read_setup; + u8 nrd_setup; + u8 ncs_write_setup; + u8 nwe_setup; + + /* Pulse length of given strobe */ + u8 ncs_read_pulse; + u8 nrd_pulse; + u8 ncs_write_pulse; + u8 nwe_pulse; + + /* Total cycle length of given operation */ + u8 read_cycle; + u8 write_cycle; + + /* Bus width in bytes */ + u8 bus_width; + + /* + * 0: Data is sampled on rising edge of NCS + * 1: Data is sampled on rising edge of NRD + */ + unsigned int nrd_controlled:1; + + /* + * 0: Data is driven on falling edge of NCS + * 1: Data is driven on falling edge of NWR + */ + unsigned int nwe_controlled:1; + + /* + * 0: NWAIT is disabled + * 1: Reserved + * 2: NWAIT is frozen mode + * 3: NWAIT in ready mode + */ + unsigned int nwait_mode:2; + + /* + * 0: Byte select access type + * 1: Byte write access type + */ + unsigned int byte_write:1; + + /* + * Number of clock cycles before data is released after + * the rising edge of the read controlling signal + * + * Total cycles from SMC is tdf_cycles + 1 + */ + unsigned int tdf_cycles:4; + + /* + * 0: TDF optimization disabled + * 1: TDF optimization enabled + */ + unsigned int tdf_mode:1; +}; + +extern void smc_set_timing(struct smc_config *config, + const struct smc_timing *timing); + +extern int smc_set_configuration(int cs, const struct smc_config *config); +extern struct smc_config *smc_get_configuration(int cs); + +#endif /* __ARCH_AT32AP_SMC_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/sram.h b/arch/avr32/mach-at32ap/include/mach/sram.h new file mode 100644 index 00000000000..4838dae7601 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/sram.h @@ -0,0 +1,30 @@ +/* + * Simple SRAM allocator + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ARCH_SRAM_H +#define __ASM_AVR32_ARCH_SRAM_H + +#include + +extern struct gen_pool *sram_pool; + +static inline unsigned long sram_alloc(size_t len) +{ + if (!sram_pool) + return 0UL; + + return gen_pool_alloc(sram_pool, len); +} + +static inline void sram_free(unsigned long addr, size_t len) +{ + return gen_pool_free(sram_pool, addr, len); +} + +#endif /* __ASM_AVR32_ARCH_SRAM_H */ -- GitLab From 3663b736a5083b3bce74520b637f630f01f66a7f Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 5 Aug 2008 13:57:38 +0200 Subject: [PATCH 0776/1024] avr32: Use instead of Update all avr32-specific files to use the new platform-specific header locations. Drivers shared with ARM are left alone for now. Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atngw100/flash.c | 2 +- arch/avr32/boards/atngw100/setup.c | 8 ++++---- arch/avr32/boards/atstk1000/atstk1002.c | 10 +++++----- arch/avr32/boards/atstk1000/atstk1003.c | 8 ++++---- arch/avr32/boards/atstk1000/atstk1004.c | 8 ++++---- arch/avr32/boards/atstk1000/flash.c | 2 +- arch/avr32/boards/atstk1000/setup.c | 6 +++--- arch/avr32/include/asm/gpio.h | 2 +- arch/avr32/include/asm/io.h | 2 +- arch/avr32/include/asm/irq.h | 2 +- arch/avr32/kernel/process.c | 2 +- arch/avr32/kernel/setup.c | 4 ++-- arch/avr32/kernel/time.c | 2 +- arch/avr32/mach-at32ap/at32ap700x.c | 8 ++++---- arch/avr32/mach-at32ap/hsmc.c | 2 +- arch/avr32/mach-at32ap/pio.c | 2 +- arch/avr32/mach-at32ap/pm-at32ap700x.S | 2 +- arch/avr32/mach-at32ap/pm.c | 4 ++-- drivers/ata/pata_at32.c | 4 ++-- drivers/mmc/host/atmel-mci.c | 2 +- 20 files changed, 41 insertions(+), 41 deletions(-) diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c index b07ae63aa54..55ccc9ce489 100644 --- a/arch/avr32/boards/atngw100/flash.c +++ b/arch/avr32/boards/atngw100/flash.c @@ -13,7 +13,7 @@ #include #include -#include +#include static struct smc_timing flash_timing __initdata = { .ncs_read_setup = 0, diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index c7fe94d03a1..670c87b2db1 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -23,10 +23,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include /* Oscillator frequencies. These are board-specific */ unsigned long at32_board_osc_rates[3] = { diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 8538ba75ef9..b33542b9756 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -23,10 +23,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include "atstk1000.h" @@ -49,7 +49,7 @@ unsigned long at32_board_osc_rates[3] = { */ #ifdef CONFIG_BOARD_ATSTK1006 #include -#include +#include static struct smc_timing nand_timing __initdata = { .ncs_read_setup = 0, diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c index 591fc73b554..0cf664174c1 100644 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ b/arch/avr32/boards/atstk1000/atstk1003.c @@ -20,10 +20,10 @@ #include -#include -#include -#include -#include +#include +#include +#include +#include #include "atstk1000.h" diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index d9c5e0a2125..50a5273e591 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -22,10 +22,10 @@ #include -#include -#include -#include -#include +#include +#include +#include +#include #include "atstk1000.h" diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c index 3d0a102ad45..6e4d561977f 100644 --- a/arch/avr32/boards/atstk1000/flash.c +++ b/arch/avr32/boards/atstk1000/flash.c @@ -13,7 +13,7 @@ #include #include -#include +#include static struct smc_timing flash_timing __initdata = { .ncs_read_setup = 0, diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c index 8bedf93876a..2d6b560115d 100644 --- a/arch/avr32/boards/atstk1000/setup.c +++ b/arch/avr32/boards/atstk1000/setup.c @@ -18,9 +18,9 @@ #include -#include -#include -#include +#include +#include +#include #include "atstk1000.h" diff --git a/arch/avr32/include/asm/gpio.h b/arch/avr32/include/asm/gpio.h index 19e8ccc77db..b771f710596 100644 --- a/arch/avr32/include/asm/gpio.h +++ b/arch/avr32/include/asm/gpio.h @@ -1,6 +1,6 @@ #ifndef __ASM_AVR32_GPIO_H #define __ASM_AVR32_GPIO_H -#include +#include #endif /* __ASM_AVR32_GPIO_H */ diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h index 8be7ea9c904..a520f77ead9 100644 --- a/arch/avr32/include/asm/io.h +++ b/arch/avr32/include/asm/io.h @@ -8,7 +8,7 @@ #include #include -#include +#include /* virt_to_phys will only work when address is in P1 or P2 */ static __inline__ unsigned long virt_to_phys(volatile void *address) diff --git a/arch/avr32/include/asm/irq.h b/arch/avr32/include/asm/irq.h index c563b7720c1..6fa8913f854 100644 --- a/arch/avr32/include/asm/irq.h +++ b/arch/avr32/include/asm/irq.h @@ -3,7 +3,7 @@ #define NR_INTERNAL_IRQS 64 -#include +#include #ifndef NR_IRQS #define NR_IRQS (NR_INTERNAL_IRQS) diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c index ff820a9e743..2c08ac992ac 100644 --- a/arch/avr32/kernel/process.c +++ b/arch/avr32/kernel/process.c @@ -18,7 +18,7 @@ #include #include -#include +#include void (*pm_power_off)(void) = NULL; EXPORT_SYMBOL(pm_power_off); diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c index ce48c14f434..d8e623c426c 100644 --- a/arch/avr32/kernel/setup.c +++ b/arch/avr32/kernel/setup.c @@ -26,8 +26,8 @@ #include #include -#include -#include +#include +#include extern int root_mountflags; diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index 7e7f32771ae..283481d74a5 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -15,7 +15,7 @@ #include -#include +#include static cycle_t read_cycle_count(void) diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 1617048c86c..92bfb4d8ae4 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -20,10 +20,10 @@ #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include -!Iinclude/asm-s390/cio.h +!Iarch/s390/include/asm/cio.h ccw devices @@ -114,7 +114,7 @@ ccw device structure. Device drivers must not bypass those functions or strange side effects may happen. -!Iinclude/asm-s390/ccwdev.h +!Iarch/s390/include/asm/ccwdev.h !Edrivers/s390/cio/device.c !Edrivers/s390/cio/device_ops.c @@ -125,7 +125,7 @@ measurement data which is made available by the channel subsystem for each channel attached device. -!Iinclude/asm-s390/cmb.h +!Iarch/s390/include/asm/cmb.h !Edrivers/s390/cio/cmf.c @@ -142,7 +142,7 @@ ccw group devices -!Iinclude/asm-s390/ccwgroup.h +!Iarch/s390/include/asm/ccwgroup.h !Edrivers/s390/cio/ccwgroup.c -- GitLab From ef647f1300d69adb8223d970554d59d7e244db6d Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 5 Aug 2008 18:42:51 -0700 Subject: [PATCH 0826/1024] bridge: Eliminate unnecessary forward delay From: Stephen Hemminger Based upon original patch by Herbert Xu, which contained the following problem description: -------------------- When the forward delay is set to zero, we still delay the setting of the forwarding state by one or possibly two timers depending on whether STP is enabled. This could either turn out to be instantaneous, or horribly slow depending on the load of the machine. As there is nothing preventing us from enabling forwarding straight away, this patch eliminates this potential delay by executing the code directly if the forward delay is zero. The effect of this problem is that immediately after the carrier comes on a port, the bridge will drop all packets received from that port until it enters forwarding mode, thus causing unnecessary packet loss. Note that this patch doesn't fully remove the delay due to the link watcher. We should also check the carrier state when we are about to drop an incoming packet because the port is disabled. But that's for another patch. -------------------- This version of the fix takes a different approach, in that it just does the state change directly. Signed-off-by: David S. Miller --- net/bridge/br_stp.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c index 921bbe5cb94..6e63ec3f1fc 100644 --- a/net/bridge/br_stp.c +++ b/net/bridge/br_stp.c @@ -368,14 +368,25 @@ static void br_make_blocking(struct net_bridge_port *p) /* called under bridge lock */ static void br_make_forwarding(struct net_bridge_port *p) { - if (p->state == BR_STATE_BLOCKING) { - if (p->br->stp_enabled == BR_KERNEL_STP) - p->state = BR_STATE_LISTENING; - else - p->state = BR_STATE_LEARNING; + struct net_bridge *br = p->br; - br_log_state(p); - mod_timer(&p->forward_delay_timer, jiffies + p->br->forward_delay); } + if (p->state != BR_STATE_BLOCKING) + return; + + if (br->forward_delay == 0) { + p->state = BR_STATE_FORWARDING; + br_topology_change_detection(br); + del_timer(&p->forward_delay_timer); + } + else if (p->br->stp_enabled == BR_KERNEL_STP) + p->state = BR_STATE_LISTENING; + else + p->state = BR_STATE_LEARNING; + + br_log_state(p); + + if (br->forward_delay != 0) + mod_timer(&p->forward_delay_timer, jiffies + br->forward_delay); } /* called under bridge lock */ -- GitLab From 1211a64554065316e02b3c62b320088ad4f63260 Mon Sep 17 00:00:00 2001 From: Robert Olsson Date: Tue, 5 Aug 2008 18:44:26 -0700 Subject: [PATCH 0827/1024] pktgen: random flow Random flow generation has not worked. This fixes it. Signed-off-by: Robert Olsson Signed-off-by: David S. Miller --- net/core/pktgen.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 3284605f2ec..9c87320fdf3 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -2085,15 +2085,19 @@ static inline int f_pick(struct pktgen_dev *pkt_dev) if (pkt_dev->flows[flow].count >= pkt_dev->lflow) { /* reset time */ pkt_dev->flows[flow].count = 0; + pkt_dev->flows[flow].flags = 0; pkt_dev->curfl += 1; if (pkt_dev->curfl >= pkt_dev->cflows) pkt_dev->curfl = 0; /*reset */ } } else { flow = random32() % pkt_dev->cflows; + pkt_dev->curfl = flow; - if (pkt_dev->flows[flow].count > pkt_dev->lflow) + if (pkt_dev->flows[flow].count > pkt_dev->lflow) { pkt_dev->flows[flow].count = 0; + pkt_dev->flows[flow].flags = 0; + } } return pkt_dev->curfl; -- GitLab From ff2a79a5a934fe0dbb136ffad61f79b5c6385614 Mon Sep 17 00:00:00 2001 From: Robert Olsson Date: Tue, 5 Aug 2008 18:45:05 -0700 Subject: [PATCH 0828/1024] pktgen: mac count dst_mac_count and src_mac_count patch from Eneas Hunguana We have sent one mac address to much. Signed-off-by: Robert Olsson Signed-off-by: David S. Miller --- net/core/pktgen.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 9c87320fdf3..2498cdaf8cb 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -2166,7 +2166,7 @@ static void mod_cur_headers(struct pktgen_dev *pkt_dev) mc = random32() % pkt_dev->src_mac_count; else { mc = pkt_dev->cur_src_mac_offset++; - if (pkt_dev->cur_src_mac_offset > + if (pkt_dev->cur_src_mac_offset >= pkt_dev->src_mac_count) pkt_dev->cur_src_mac_offset = 0; } @@ -2193,7 +2193,7 @@ static void mod_cur_headers(struct pktgen_dev *pkt_dev) else { mc = pkt_dev->cur_dst_mac_offset++; - if (pkt_dev->cur_dst_mac_offset > + if (pkt_dev->cur_dst_mac_offset >= pkt_dev->dst_mac_count) { pkt_dev->cur_dst_mac_offset = 0; } -- GitLab From ffb208479bd62ab26c29a242faeb1de1c6d5fcdc Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 5 Aug 2008 18:46:57 -0700 Subject: [PATCH 0829/1024] AX.25: Fix sysctl registration if !CONFIG_AX25_DAMA_SLAVE Since 49ffcf8f99e8d33ec8afb450956804af518fd788 ("sysctl: update sysctl_check_table") setting struct ctl_table.procname = NULL does no longer work as it used to the way the AX.25 code is expecting it to resulting in the AX.25 sysctl registration code to break if CONFIG_AX25_DAMA_SLAVE was not set as in some distribution kernels. Kernel releases from 2.6.24 are affected. Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller --- net/ax25/sysctl_net_ax25.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/net/ax25/sysctl_net_ax25.c b/net/ax25/sysctl_net_ax25.c index f597987b242..f288fc4aef9 100644 --- a/net/ax25/sysctl_net_ax25.c +++ b/net/ax25/sysctl_net_ax25.c @@ -36,6 +36,7 @@ static struct ctl_path ax25_path[] = { { .procname = "ax25", .ctl_name = NET_AX25, }, { } }; + static const ctl_table ax25_param_table[] = { { .ctl_name = NET_AX25_IP_DEFAULT_MODE, @@ -167,6 +168,7 @@ static const ctl_table ax25_param_table[] = { .extra1 = &min_proto, .extra2 = &max_proto }, +#ifdef CONFIG_AX25_DAMA_SLAVE { .ctl_name = NET_AX25_DAMA_SLAVE_TIMEOUT, .procname = "dama_slave_timeout", @@ -177,6 +179,8 @@ static const ctl_table ax25_param_table[] = { .extra1 = &min_ds_timeout, .extra2 = &max_ds_timeout }, +#endif + { .ctl_name = 0 } /* that's all, folks! */ }; @@ -210,16 +214,6 @@ void ax25_register_sysctl(void) ax25_table[n].procname = ax25_dev->dev->name; ax25_table[n].mode = 0555; -#ifndef CONFIG_AX25_DAMA_SLAVE - /* - * We do not wish to have a representation of this parameter - * in /proc/sys/ when configured *not* to include the - * AX.25 DAMA slave code, do we? - */ - - child[AX25_VALUES_DS_TIMEOUT].procname = NULL; -#endif - child[AX25_MAX_VALUES].ctl_name = 0; /* just in case... */ for (k = 0; k < AX25_MAX_VALUES; k++) -- GitLab From 4e1e7fb9e879d48011a887715d7966484d9644ea Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 2 Aug 2008 07:26:12 -0400 Subject: [PATCH 0830/1024] bundle up Unix SET_PATH_INFO args into a struct and change name We'd like to be able to use the unix SET_PATH_INFO_BASIC args to set file times as well, but that makes the argument list rather long. Bundle up the args for unix SET_PATH_INFO call into a struct. For now, we don't actually use the times fields anywhere. That will be done in a follow-on patch. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifspdu.h | 2 +- fs/cifs/cifsproto.h | 17 ++++++++++--- fs/cifs/cifssmb.c | 26 ++++++++++---------- fs/cifs/dir.c | 58 +++++++++++++++++++++++++-------------------- fs/cifs/file.c | 19 ++++++++------- fs/cifs/inode.c | 54 ++++++++++++++++++++++++----------------- 6 files changed, 102 insertions(+), 74 deletions(-) diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index 409abce1273..d2a073edd1b 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -262,7 +262,7 @@ */ #define CIFS_NO_HANDLE 0xFFFF -#define NO_CHANGE_64 cpu_to_le64(0xFFFFFFFFFFFFFFFFULL) +#define NO_CHANGE_64 0xFFFFFFFFFFFFFFFFULL #define NO_CHANGE_32 0xFFFFFFFFUL /* IPC$ in ASCII */ diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index b9f5e935f82..e65ff984909 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -191,9 +191,20 @@ extern int CIFSSMBSetEOF(const int xid, struct cifsTconInfo *tcon, extern int CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon, __u64 size, __u16 fileHandle, __u32 opener_pid, bool AllocSizeFlag); -extern int CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *pTcon, - char *full_path, __u64 mode, __u64 uid, - __u64 gid, dev_t dev, + +struct cifs_unix_set_info_args { + __u64 ctime; + __u64 atime; + __u64 mtime; + __u64 mode; + __u64 uid; + __u64 gid; + dev_t device; +}; + +extern int CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *pTcon, + char *fileName, + const struct cifs_unix_set_info_args *args, const struct nls_table *nls_codepage, int remap_special_chars); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index c621ffa2ca9..ced8eaa9d37 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -5013,10 +5013,9 @@ SetAttrLgcyRetry: #endif /* temporarily unneeded SetAttr legacy function */ int -CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *tcon, - char *fileName, __u64 mode, __u64 uid, __u64 gid, - dev_t device, const struct nls_table *nls_codepage, - int remap) +CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *tcon, char *fileName, + const struct cifs_unix_set_info_args *args, + const struct nls_table *nls_codepage, int remap) { TRANSACTION2_SPI_REQ *pSMB = NULL; TRANSACTION2_SPI_RSP *pSMBr = NULL; @@ -5025,6 +5024,7 @@ CIFSSMBUnixSetPerms(const int xid, struct cifsTconInfo *tcon, int bytes_returned = 0; FILE_UNIX_BASIC_INFO *data_offset; __u16 params, param_offset, offset, count, byte_count; + __u64 mode = args->mode; cFYI(1, ("In SetUID/GID/Mode")); setPermsRetry: @@ -5080,16 +5080,16 @@ setPermsRetry: set file size and do not want to truncate file size to zero accidently as happened on one Samba server beta by putting zero instead of -1 here */ - data_offset->EndOfFile = NO_CHANGE_64; - data_offset->NumOfBytes = NO_CHANGE_64; - data_offset->LastStatusChange = NO_CHANGE_64; - data_offset->LastAccessTime = NO_CHANGE_64; - data_offset->LastModificationTime = NO_CHANGE_64; - data_offset->Uid = cpu_to_le64(uid); - data_offset->Gid = cpu_to_le64(gid); + data_offset->EndOfFile = cpu_to_le64(NO_CHANGE_64); + data_offset->NumOfBytes = cpu_to_le64(NO_CHANGE_64); + data_offset->LastStatusChange = cpu_to_le64(args->ctime); + data_offset->LastAccessTime = cpu_to_le64(args->atime); + data_offset->LastModificationTime = cpu_to_le64(args->mtime); + data_offset->Uid = cpu_to_le64(args->uid); + data_offset->Gid = cpu_to_le64(args->gid); /* better to leave device as zero when it is */ - data_offset->DevMajor = cpu_to_le64(MAJOR(device)); - data_offset->DevMinor = cpu_to_le64(MINOR(device)); + data_offset->DevMajor = cpu_to_le64(MAJOR(args->device)); + data_offset->DevMinor = cpu_to_le64(MINOR(args->device)); data_offset->Permissions = cpu_to_le64(mode); if (S_ISREG(mode)) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index fb69c1fa85c..634cf330fe0 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -226,23 +226,26 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, /* If Open reported that we actually created a file then we now have to set the mode if possible */ if ((pTcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) { + struct cifs_unix_set_info_args args = { + .mode = mode, + .ctime = NO_CHANGE_64, + .atime = NO_CHANGE_64, + .mtime = NO_CHANGE_64, + .device = 0, + }; + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { - CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode, - (__u64)current->fsuid, - (__u64)current->fsgid, - 0 /* dev */, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + args.uid = (__u64) current->fsuid; + args.gid = (__u64) current->fsgid; } else { - CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode, - (__u64)-1, - (__u64)-1, - 0 /* dev */, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + args.uid = NO_CHANGE_64; + args.gid = NO_CHANGE_64; } + + CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, + cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); } else { /* BB implement mode setting via Windows security descriptors e.g. */ @@ -357,21 +360,24 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode, if (full_path == NULL) rc = -ENOMEM; else if (pTcon->unix_ext) { - mode &= ~current->fs->umask; + struct cifs_unix_set_info_args args = { + .mode = mode & ~current->fs->umask, + .ctime = NO_CHANGE_64, + .atime = NO_CHANGE_64, + .mtime = NO_CHANGE_64, + .device = device_number, + }; if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { - rc = CIFSSMBUnixSetPerms(xid, pTcon, full_path, - mode, (__u64)current->fsuid, - (__u64)current->fsgid, - device_number, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + args.uid = (__u64) current->fsuid; + args.gid = (__u64) current->fsgid; } else { - rc = CIFSSMBUnixSetPerms(xid, pTcon, - full_path, mode, (__u64)-1, (__u64)-1, - device_number, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + args.uid = NO_CHANGE_64; + args.gid = NO_CHANGE_64; } + rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path, + &args, cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); if (!rc) { rc = cifs_get_inode_info_unix(&newinode, full_path, diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 0aac824371a..d40738d2ab5 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -310,18 +310,19 @@ int cifs_open(struct inode *inode, struct file *file) /* time to set mode which we can not set earlier due to problems creating new read-only files */ if (pTcon->unix_ext) { - CIFSSMBUnixSetPerms(xid, pTcon, full_path, - inode->i_mode, - (__u64)-1, (__u64)-1, 0 /* dev */, + struct cifs_unix_set_info_args args = { + .mode = inode->i_mode, + .uid = NO_CHANGE_64, + .gid = NO_CHANGE_64, + .ctime = NO_CHANGE_64, + .atime = NO_CHANGE_64, + .mtime = NO_CHANGE_64, + .device = 0, + }; + CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); - } else { - /* BB implement via Windows security descriptors eg - CIFSSMBWinSetPerms(xid, pTcon, full_path, mode, - -1, -1, local_nls); - in the meantime could set r/o dos attribute when - perms are eg: mode & 0222 == 0 */ } } diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 0e5dccc2f79..024846719f1 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -986,23 +986,24 @@ mkdir_get_info: direntry->d_inode->i_nlink = 2; mode &= ~current->fs->umask; if (pTcon->unix_ext) { + struct cifs_unix_set_info_args args = { + .mode = mode, + .ctime = NO_CHANGE_64, + .atime = NO_CHANGE_64, + .mtime = NO_CHANGE_64, + .device = 0, + }; if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { - CIFSSMBUnixSetPerms(xid, pTcon, full_path, - mode, - (__u64)current->fsuid, - (__u64)current->fsgid, - 0 /* dev_t */, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + args.uid = (__u64)current->fsuid; + args.gid = (__u64)current->fsgid; } else { - CIFSSMBUnixSetPerms(xid, pTcon, full_path, - mode, (__u64)-1, - (__u64)-1, 0 /* dev_t */, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); + args.uid = NO_CHANGE_64; + args.gid = NO_CHANGE_64; } + CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, + cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); } else { if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) && (mode & S_IWUGO) == 0) { @@ -1500,9 +1501,9 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) FILE_BASIC_INFO time_buf; bool set_time = false; bool set_dosattr = false; - __u64 mode = 0xFFFFFFFFFFFFFFFFULL; - __u64 uid = 0xFFFFFFFFFFFFFFFFULL; - __u64 gid = 0xFFFFFFFFFFFFFFFFULL; + __u64 mode = NO_CHANGE_64; + __u64 uid = NO_CHANGE_64; + __u64 gid = NO_CHANGE_64; struct cifsInodeInfo *cifsInode; struct inode *inode = direntry->d_inode; @@ -1586,12 +1587,21 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) } if ((pTcon->unix_ext) - && (attrs->ia_valid & (ATTR_MODE | ATTR_GID | ATTR_UID))) - rc = CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode, uid, gid, - 0 /* dev_t */, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & + && (attrs->ia_valid & (ATTR_MODE | ATTR_GID | ATTR_UID))) { + struct cifs_unix_set_info_args args = { + .mode = mode, + .uid = uid, + .gid = gid, + .ctime = NO_CHANGE_64, + .atime = NO_CHANGE_64, + .mtime = NO_CHANGE_64, + .device = 0, + }; + rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, + cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); - else if (attrs->ia_valid & ATTR_MODE) { + } else if (attrs->ia_valid & ATTR_MODE) { rc = 0; #ifdef CONFIG_CIFS_EXPERIMENTAL if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) -- GitLab From 063ea27925d70b1d9dd4343d685f722f0274bfd1 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 6 Aug 2008 04:23:13 +0000 Subject: [PATCH 0831/1024] [CIFS] fix trailing whitespace Jeff left trailing whitespace in previous patch Signed-off-by: Steve French --- fs/cifs/cifssmb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index ced8eaa9d37..f6e83a78618 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -5014,7 +5014,7 @@ SetAttrLgcyRetry: int CIFSSMBUnixSetInfo(const int xid, struct cifsTconInfo *tcon, char *fileName, - const struct cifs_unix_set_info_args *args, + const struct cifs_unix_set_info_args *args, const struct nls_table *nls_codepage, int remap) { TRANSACTION2_SPI_REQ *pSMB = NULL; -- GitLab From 6fc000e5190234c7e5b244d1e2095d50b630d63f Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 2 Aug 2008 07:26:12 -0400 Subject: [PATCH 0832/1024] change CIFSSMBSetTimes to CIFSSMBSetPathInfo CIFSSMBSetTimes is a deceptive name. This function does more that just set file times. Change it to CIFSSMBSetPathInfo, which is closer to its real purpose. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 2 +- fs/cifs/cifssmb.c | 6 +++--- fs/cifs/inode.c | 8 ++++---- 3 files changed, 8 insertions(+), 8 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index e65ff984909..eb2be992608 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -172,7 +172,7 @@ extern int CIFSSMBQFSUnixInfo(const int xid, struct cifsTconInfo *tcon); extern int CIFSSMBQFSPosixInfo(const int xid, struct cifsTconInfo *tcon, struct kstatfs *FSData); -extern int CIFSSMBSetTimes(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBSetPathInfo(const int xid, struct cifsTconInfo *tcon, const char *fileName, const FILE_BASIC_INFO *data, const struct nls_table *nls_codepage, int remap_special_chars); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index f6e83a78618..daf010a2ba8 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -4882,9 +4882,9 @@ CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon, int -CIFSSMBSetTimes(const int xid, struct cifsTconInfo *tcon, const char *fileName, - const FILE_BASIC_INFO *data, - const struct nls_table *nls_codepage, int remap) +CIFSSMBSetPathInfo(const int xid, struct cifsTconInfo *tcon, + const char *fileName, const FILE_BASIC_INFO *data, + const struct nls_table *nls_codepage, int remap) { TRANSACTION2_SPI_REQ *pSMB = NULL; TRANSACTION2_SPI_RSP *pSMBr = NULL; diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 024846719f1..9d94afe9b60 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -737,7 +737,7 @@ psx_del_no_retry: /* ATTRS set to normal clears r/o bit */ pinfo_buf->Attributes = cpu_to_le32(ATTR_NORMAL); if (!(pTcon->ses->flags & CIFS_SES_NT4)) - rc = CIFSSMBSetTimes(xid, pTcon, full_path, + rc = CIFSSMBSetPathInfo(xid, pTcon, full_path, pinfo_buf, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & @@ -1010,7 +1010,7 @@ mkdir_get_info: FILE_BASIC_INFO pInfo; memset(&pInfo, 0, sizeof(pInfo)); pInfo.Attributes = cpu_to_le32(ATTR_READONLY); - CIFSSMBSetTimes(xid, pTcon, full_path, + CIFSSMBSetPathInfo(xid, pTcon, full_path, &pInfo, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); @@ -1680,8 +1680,8 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) /* In the future we should experiment - try setting timestamps via Handle (SetFileInfo) instead of by path */ if (!(pTcon->ses->flags & CIFS_SES_NT4)) - rc = CIFSSMBSetTimes(xid, pTcon, full_path, &time_buf, - cifs_sb->local_nls, + rc = CIFSSMBSetPathInfo(xid, pTcon, full_path, + &time_buf, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); else -- GitLab From 2dd2dfa060650118661422d4e666ac804c388751 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 2 Aug 2008 07:26:12 -0400 Subject: [PATCH 0833/1024] Rename CIFSSMBSetFileTimes to CIFSSMBSetFileInfo and add PID arg The new name is more clear since this is also used to set file attributes. We'll need the pid_of_opener arg so that we can pass in filehandles of other pids and spare ourselves an open call. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 5 +++-- fs/cifs/cifssmb.c | 11 ++++------- fs/cifs/inode.c | 11 ++++++----- 3 files changed, 13 insertions(+), 14 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index eb2be992608..a729d083e6f 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -176,8 +176,9 @@ extern int CIFSSMBSetPathInfo(const int xid, struct cifsTconInfo *tcon, const char *fileName, const FILE_BASIC_INFO *data, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon, - const FILE_BASIC_INFO *data, __u16 fid); +extern int CIFSSMBSetFileInfo(const int xid, struct cifsTconInfo *tcon, + const FILE_BASIC_INFO *data, __u16 fid, + __u32 pid_of_opener); #if 0 extern int CIFSSMBSetAttrLegacy(int xid, struct cifsTconInfo *tcon, char *fileName, __u16 dos_attributes, diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index daf010a2ba8..6e8e8fc04c0 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -4816,8 +4816,8 @@ CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon, __u64 size, time and resort to the original setpathinfo level which takes the ancient DOS time format with 2 second granularity */ int -CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon, - const FILE_BASIC_INFO *data, __u16 fid) +CIFSSMBSetFileInfo(const int xid, struct cifsTconInfo *tcon, + const FILE_BASIC_INFO *data, __u16 fid, __u32 pid_of_opener) { struct smb_com_transaction2_sfi_req *pSMB = NULL; char *data_offset; @@ -4830,11 +4830,8 @@ CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon, if (rc) return rc; - /* At this point there is no need to override the current pid - with the pid of the opener, but that could change if we someday - use an existing handle (rather than opening one on the fly) */ - /* pSMB->hdr.Pid = cpu_to_le16((__u16)pid_of_opener); - pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid_of_opener >> 16));*/ + pSMB->hdr.Pid = cpu_to_le16((__u16)pid_of_opener); + pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid_of_opener >> 16)); params = 6; pSMB->MaxSetupCount = 0; diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 9d94afe9b60..d952914dfc4 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -767,9 +767,10 @@ psx_del_no_retry: cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); if (rc == 0) { - rc = CIFSSMBSetFileTimes(xid, pTcon, - pinfo_buf, - netfid); + rc = CIFSSMBSetFileInfo(xid, pTcon, + pinfo_buf, + netfid, + current->tgid); CIFSSMBClose(xid, pTcon, netfid); } } @@ -1702,8 +1703,8 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); if (rc == 0) { - rc = CIFSSMBSetFileTimes(xid, pTcon, &time_buf, - netfid); + rc = CIFSSMBSetFileInfo(xid, pTcon, &time_buf, + netfid, current->tgid); CIFSSMBClose(xid, pTcon, netfid); } else { /* BB For even older servers we could convert time_buf -- GitLab From 95089910933e10768cfef1ab0bab0c55b962aacb Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 6 Aug 2008 04:39:02 +0000 Subject: [PATCH 0834/1024] [CIFS] cifs_mkdir and cifs_create should respect the setgid bit on parent dir If a server supports unix extensions but does not support POSIX create routines, then the client will create a new inode with a standard SMB mkdir or create/open call and then will set the mode. When it does this, it does not take the setgid bit on the parent directory into account. This patch has CIFS flip on the setgid bit when the parent directory has it. If the share is mounted with "setuids" then also change the group owner to the gid of the parent. This patch should apply cleanly on top of the setattr cleanup patches that I sent a few weeks ago. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/dir.c | 13 ++++++++++--- fs/cifs/inode.c | 18 +++++++++++++++--- 2 files changed, 25 insertions(+), 6 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 634cf330fe0..e962e75e6f7 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -236,12 +236,14 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { args.uid = (__u64) current->fsuid; - args.gid = (__u64) current->fsgid; + if (inode->i_mode & S_ISGID) + args.gid = (__u64) inode->i_gid; + else + args.gid = (__u64) current->fsgid; } else { args.uid = NO_CHANGE_64; args.gid = NO_CHANGE_64; } - CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & @@ -270,7 +272,12 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) { newinode->i_uid = current->fsuid; - newinode->i_gid = current->fsgid; + if (inode->i_mode & S_ISGID) + newinode->i_gid = + inode->i_gid; + else + newinode->i_gid = + current->fsgid; } } } diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index d952914dfc4..6d911896d74 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -985,7 +985,12 @@ mkdir_get_info: * failed to get it from the server or was set bogus */ if ((direntry->d_inode) && (direntry->d_inode->i_nlink < 2)) direntry->d_inode->i_nlink = 2; + mode &= ~current->fs->umask; + /* must turn on setgid bit if parent dir has it */ + if (inode->i_mode & S_ISGID) + mode |= S_ISGID; + if (pTcon->unix_ext) { struct cifs_unix_set_info_args args = { .mode = mode, @@ -996,7 +1001,10 @@ mkdir_get_info: }; if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { args.uid = (__u64)current->fsuid; - args.gid = (__u64)current->fsgid; + if (inode->i_mode & S_ISGID) + args.gid = (__u64)inode->i_gid; + else + args.gid = (__u64)current->fsgid; } else { args.uid = NO_CHANGE_64; args.gid = NO_CHANGE_64; @@ -1026,8 +1034,12 @@ mkdir_get_info: CIFS_MOUNT_SET_UID) { direntry->d_inode->i_uid = current->fsuid; - direntry->d_inode->i_gid = - current->fsgid; + if (inode->i_mode & S_ISGID) + direntry->d_inode->i_gid = + inode->i_gid; + else + direntry->d_inode->i_gid = + current->fsgid; } } } -- GitLab From 18351070b86d155713cf790b26af4f21b1fd0b29 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 5 Aug 2008 21:42:21 -0700 Subject: [PATCH 0835/1024] Re-introduce "[SCSI] extend the last_sector_bug flag to cover more sectors" This re-introduces commit 2b142900784c6e38c8d39fa57d5f95ef08e735d8, which was reverted due to the regression it caused by commit fca082c9f1e11ec07efa8d2f9f13688521253f36. That regression was not root-caused by the original commit, it was just uncovered by it, and the real fix was done by Alan Stern in commit 580da34847488b404218d1d7f53b156f245f5555 ("Fix USB storage hang on command abort"). We can thus re-introduce the change that was confirmed by Alan Jenkins to be still required by his odd card reader. Cc: Alan Jenkins Cc: Alan Stern Cc: James Bottomley Signed-off-by: Linus Torvalds --- drivers/scsi/sd.c | 21 +++++++++++++++------ drivers/scsi/sd.h | 6 ++++++ include/scsi/scsi_device.h | 3 ++- 3 files changed, 23 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 8e08d51a0f0..e5e7d785645 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -375,6 +375,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) struct gendisk *disk = rq->rq_disk; struct scsi_disk *sdkp; sector_t block = rq->sector; + sector_t threshold; unsigned int this_count = rq->nr_sectors; unsigned int timeout = sdp->timeout; int ret; @@ -422,13 +423,21 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) } /* - * Some devices (some sdcards for one) don't like it if the - * last sector gets read in a larger then 1 sector read. + * Some SD card readers can't handle multi-sector accesses which touch + * the last one or two hardware sectors. Split accesses as needed. */ - if (unlikely(sdp->last_sector_bug && - rq->nr_sectors > sdp->sector_size / 512 && - block + this_count == get_capacity(disk))) - this_count -= sdp->sector_size / 512; + threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS * + (sdp->sector_size / 512); + + if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) { + if (block < threshold) { + /* Access up to the threshold but not beyond */ + this_count = threshold - block; + } else { + /* Access only a single hardware sector */ + this_count = sdp->sector_size / 512; + } + } SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n", (unsigned long long)block)); diff --git a/drivers/scsi/sd.h b/drivers/scsi/sd.h index 550b2f70a1f..95b9f06534d 100644 --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -31,6 +31,12 @@ */ #define SD_BUF_SIZE 512 +/* + * Number of sectors at the end of the device to avoid multi-sector + * accesses to in the case of last_sector_bug + */ +#define SD_LAST_BUGGY_SECTORS 8 + struct scsi_disk { struct scsi_driver *driver; /* always &sd_template */ struct scsi_device *device; diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 9cecc409f0f..291d56a1916 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -140,7 +140,8 @@ struct scsi_device { unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */ unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */ unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */ - unsigned last_sector_bug:1; /* Always read last sector in a 1 sector read */ + unsigned last_sector_bug:1; /* do not use multisector accesses on + SD_LAST_BUGGY_SECTORS */ DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */ struct list_head event_list; /* asserted events */ -- GitLab From 0967d61ea0d8e8a7826bd8949cd93dd1e829ac55 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 5 Aug 2008 21:49:54 -0700 Subject: [PATCH 0836/1024] Linux 2.6.27-rc2 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index f156f40d633..ea413fa03e4 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 27 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 NAME = Rotary Wombat # *DOCUMENTATION* -- GitLab From 26b994fad6a062697846a861ecc008447409dfb6 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 6 Aug 2008 05:11:33 +0000 Subject: [PATCH 0837/1024] [CIFS] Code cleanup in old sessionsetup code Remove some long lines Signed-off-by: Steve French --- fs/cifs/CHANGES | 8 +++ fs/cifs/connect.c | 150 ++++++++++++++++++++++------------------------ 2 files changed, 80 insertions(+), 78 deletions(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 1f3465201fd..f5d0083e09f 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -1,3 +1,11 @@ +Version 1.54 +------------ +Fix premature write failure on congested networks (we would give up +on EAGAIN from the socket too quickly on large writes). +Cifs_mkdir and cifs_create now respect the setgid bit on parent dir. +Fix endian problems in acl (mode from/to cifs acl) on bigendian +architectures. + Version 1.53 ------------ DFS support added (Microsoft Distributed File System client support needed diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 34a1fc9dabf..ff4345db720 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3620,97 +3620,91 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo, } first_time = 1; } - if (!rc) { - pSesInfo->flags = 0; - pSesInfo->capabilities = pSesInfo->server->capabilities; - if (linuxExtEnabled == 0) - pSesInfo->capabilities &= (~CAP_UNIX); + + if (rc) + goto ss_err_exit; + + pSesInfo->flags = 0; + pSesInfo->capabilities = pSesInfo->server->capabilities; + if (linuxExtEnabled == 0) + pSesInfo->capabilities &= (~CAP_UNIX); /* pSesInfo->sequence_number = 0;*/ - cFYI(1, - ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d", - pSesInfo->server->secMode, - pSesInfo->server->capabilities, - pSesInfo->server->timeAdj)); - if (experimEnabled < 2) - rc = CIFS_SessSetup(xid, pSesInfo, - first_time, nls_info); - else if (extended_security - && (pSesInfo->capabilities - & CAP_EXTENDED_SECURITY) - && (pSesInfo->server->secType == NTLMSSP)) { - rc = -EOPNOTSUPP; - } else if (extended_security - && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY) - && (pSesInfo->server->secType == RawNTLMSSP)) { - cFYI(1, ("NTLMSSP sesssetup")); - rc = CIFSNTLMSSPNegotiateSessSetup(xid, - pSesInfo, - &ntlmv2_flag, - nls_info); - if (!rc) { - if (ntlmv2_flag) { - char *v2_response; - cFYI(1, ("more secure NTLM ver2 hash")); - if (CalcNTLMv2_partial_mac_key(pSesInfo, - nls_info)) { - rc = -ENOMEM; - goto ss_err_exit; - } else - v2_response = kmalloc(16 + 64 /* blob */, GFP_KERNEL); - if (v2_response) { - CalcNTLMv2_response(pSesInfo, - v2_response); - /* if (first_time) - cifs_calculate_ntlmv2_mac_key( - pSesInfo->server->mac_signing_key, - response, ntlm_session_key,*/ - kfree(v2_response); + cFYI(1, ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d", + pSesInfo->server->secMode, + pSesInfo->server->capabilities, + pSesInfo->server->timeAdj)); + if (experimEnabled < 2) + rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info); + else if (extended_security + && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY) + && (pSesInfo->server->secType == NTLMSSP)) { + rc = -EOPNOTSUPP; + } else if (extended_security + && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY) + && (pSesInfo->server->secType == RawNTLMSSP)) { + cFYI(1, ("NTLMSSP sesssetup")); + rc = CIFSNTLMSSPNegotiateSessSetup(xid, pSesInfo, &ntlmv2_flag, + nls_info); + if (!rc) { + if (ntlmv2_flag) { + char *v2_response; + cFYI(1, ("more secure NTLM ver2 hash")); + if (CalcNTLMv2_partial_mac_key(pSesInfo, + nls_info)) { + rc = -ENOMEM; + goto ss_err_exit; + } else + v2_response = kmalloc(16 + 64 /* blob*/, + GFP_KERNEL); + if (v2_response) { + CalcNTLMv2_response(pSesInfo, + v2_response); + /* if (first_time) + cifs_calculate_ntlmv2_mac_key */ + kfree(v2_response); /* BB Put dummy sig in SessSetup PDU? */ - } else { - rc = -ENOMEM; - goto ss_err_exit; - } - } else { - SMBNTencrypt(pSesInfo->password, - pSesInfo->server->cryptKey, - ntlm_session_key); - - if (first_time) - cifs_calculate_mac_key( - &pSesInfo->server->mac_signing_key, - ntlm_session_key, - pSesInfo->password); + rc = -ENOMEM; + goto ss_err_exit; } + + } else { + SMBNTencrypt(pSesInfo->password, + pSesInfo->server->cryptKey, + ntlm_session_key); + + if (first_time) + cifs_calculate_mac_key( + &pSesInfo->server->mac_signing_key, + ntlm_session_key, + pSesInfo->password); + } /* for better security the weaker lanman hash not sent in AuthSessSetup so we no longer calculate it */ - rc = CIFSNTLMSSPAuthSessSetup(xid, - pSesInfo, - ntlm_session_key, - ntlmv2_flag, - nls_info); - } - } else { /* old style NTLM 0.12 session setup */ - SMBNTencrypt(pSesInfo->password, - pSesInfo->server->cryptKey, - ntlm_session_key); + rc = CIFSNTLMSSPAuthSessSetup(xid, pSesInfo, + ntlm_session_key, + ntlmv2_flag, + nls_info); + } + } else { /* old style NTLM 0.12 session setup */ + SMBNTencrypt(pSesInfo->password, pSesInfo->server->cryptKey, + ntlm_session_key); - if (first_time) - cifs_calculate_mac_key( + if (first_time) + cifs_calculate_mac_key( &pSesInfo->server->mac_signing_key, ntlm_session_key, pSesInfo->password); - rc = CIFSSessSetup(xid, pSesInfo, - ntlm_session_key, nls_info); - } - if (rc) { - cERROR(1, ("Send error in SessSetup = %d", rc)); - } else { - cFYI(1, ("CIFS Session Established successfully")); + rc = CIFSSessSetup(xid, pSesInfo, ntlm_session_key, nls_info); + } + if (rc) { + cERROR(1, ("Send error in SessSetup = %d", rc)); + } else { + cFYI(1, ("CIFS Session Established successfully")); pSesInfo->status = CifsGood; - } } + ss_err_exit: return rc; } -- GitLab From 6d273f8d011c351c9603c1dbfeae2c7458edd30d Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Wed, 6 Aug 2008 02:33:49 -0700 Subject: [PATCH 0838/1024] ipv4: replace dst_metric() with dst_mtu() in net/ipv4/route.c. This patch replaces dst_metric() with dst_mtu() in net/ipv4/route.c. Signed-off-by: Rami Rosen Signed-off-by: David S. Miller --- net/ipv4/route.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 1bfa078ddbd..eccb61889df 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1509,14 +1509,14 @@ unsigned short ip_rt_frag_needed(struct net *net, struct iphdr *iph, /* BSD 4.2 compatibility hack :-( */ if (mtu == 0 && - old_mtu >= dst_metric(&rth->u.dst, RTAX_MTU) && + old_mtu >= dst_mtu(&rth->u.dst) && old_mtu >= 68 + (iph->ihl << 2)) old_mtu -= iph->ihl << 2; mtu = guess_mtu(old_mtu); } - if (mtu <= dst_metric(&rth->u.dst, RTAX_MTU)) { - if (mtu < dst_metric(&rth->u.dst, RTAX_MTU)) { + if (mtu <= dst_mtu(&rth->u.dst)) { + if (mtu < dst_mtu(&rth->u.dst)) { dst_confirm(&rth->u.dst); if (mtu < ip_rt_min_pmtu) { mtu = ip_rt_min_pmtu; @@ -1538,7 +1538,7 @@ unsigned short ip_rt_frag_needed(struct net *net, struct iphdr *iph, static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu) { - if (dst_metric(dst, RTAX_MTU) > mtu && mtu >= 68 && + if (dst_mtu(dst) > mtu && mtu >= 68 && !(dst_metric_locked(dst, RTAX_MTU))) { if (mtu < ip_rt_min_pmtu) { mtu = ip_rt_min_pmtu; @@ -1667,7 +1667,7 @@ static void rt_set_nexthop(struct rtable *rt, struct fib_result *res, u32 itag) if (dst_metric(&rt->u.dst, RTAX_HOPLIMIT) == 0) rt->u.dst.metrics[RTAX_HOPLIMIT-1] = sysctl_ip_default_ttl; - if (dst_metric(&rt->u.dst, RTAX_MTU) > IP_MAX_MTU) + if (dst_mtu(&rt->u.dst) > IP_MAX_MTU) rt->u.dst.metrics[RTAX_MTU-1] = IP_MAX_MTU; if (dst_metric(&rt->u.dst, RTAX_ADVMSS) == 0) rt->u.dst.metrics[RTAX_ADVMSS-1] = max_t(unsigned int, rt->u.dst.dev->mtu - 40, -- GitLab From 1ca615fb816ba85dc765209a9b58ab82cc99bce0 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Wed, 6 Aug 2008 02:34:21 -0700 Subject: [PATCH 0839/1024] ipv6: replace dst_metric() with dst_mtu() in net/ipv6/route.c. This patch replaces dst_metric() with dst_mtu() in net/ipv6/route.c. Signed-off-by: Rami Rosen Signed-off-by: David S. Miller --- net/ipv6/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 86540b24b27..5a3e87e4b18 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1249,7 +1249,7 @@ install_route: if (dst_metric(&rt->u.dst, RTAX_HOPLIMIT) == 0) rt->u.dst.metrics[RTAX_HOPLIMIT-1] = -1; - if (!dst_metric(&rt->u.dst, RTAX_MTU)) + if (!dst_mtu(&rt->u.dst)) rt->u.dst.metrics[RTAX_MTU-1] = ipv6_get_mtu(dev); if (!dst_metric(&rt->u.dst, RTAX_ADVMSS)) rt->u.dst.metrics[RTAX_ADVMSS-1] = ipv6_advmss(net, dst_mtu(&rt->u.dst)); -- GitLab From 9714be7da8b32f36d2468fe08ff603b6402df8cf Mon Sep 17 00:00:00 2001 From: Krzysztof Piotr Oledzki Date: Wed, 6 Aug 2008 02:35:44 -0700 Subject: [PATCH 0840/1024] netfilter: fix two recent sysctl problems Starting with 9043476f726802f4b00c96d0c4f418dde48d1304 ("[PATCH] sanitize proc_sysctl") we have two netfilter releated problems: - WARNING: at kernel/sysctl.c:1966 unregister_sysctl_table+0xcc/0x103(), caused by wrong order of ini/fini calls - net.netfilter is duplicated and has truncated set of records Thanks to very useful guidelines from Al Viro, this patch fixes both of them. Signed-off-by: Krzysztof Piotr Oledzki Acked-by: Al Viro Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_core.c | 6 +++--- net/netfilter/nf_conntrack_standalone.c | 28 +++++++++++++++---------- 2 files changed, 20 insertions(+), 14 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index c519d090bdb..9d1830da8e8 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1032,10 +1032,10 @@ void nf_conntrack_cleanup(void) nf_ct_free_hashtable(nf_conntrack_hash, nf_conntrack_vmalloc, nf_conntrack_htable_size); - nf_conntrack_proto_fini(); - nf_conntrack_helper_fini(); - nf_conntrack_expect_fini(); nf_conntrack_acct_fini(); + nf_conntrack_expect_fini(); + nf_conntrack_helper_fini(); + nf_conntrack_proto_fini(); } struct hlist_head *nf_ct_alloc_hashtable(unsigned int *sizep, int *vmalloced) diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index 869ef9349d0..8509db14670 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -324,6 +324,7 @@ static int log_invalid_proto_min = 0; static int log_invalid_proto_max = 255; static struct ctl_table_header *nf_ct_sysctl_header; +static struct ctl_table_header *nf_ct_netfilter_header; static ctl_table nf_ct_sysctl_table[] = { { @@ -383,12 +384,6 @@ static ctl_table nf_ct_sysctl_table[] = { #define NET_NF_CONNTRACK_MAX 2089 static ctl_table nf_ct_netfilter_table[] = { - { - .ctl_name = NET_NETFILTER, - .procname = "netfilter", - .mode = 0555, - .child = nf_ct_sysctl_table, - }, { .ctl_name = NET_NF_CONNTRACK_MAX, .procname = "nf_conntrack_max", @@ -409,18 +404,29 @@ EXPORT_SYMBOL_GPL(nf_ct_log_invalid); static int nf_conntrack_standalone_init_sysctl(void) { - nf_ct_sysctl_header = + nf_ct_netfilter_header = register_sysctl_paths(nf_ct_path, nf_ct_netfilter_table); - if (nf_ct_sysctl_header == NULL) { - printk("nf_conntrack: can't register to sysctl.\n"); - return -ENOMEM; - } + if (!nf_ct_netfilter_header) + goto out; + + nf_ct_sysctl_header = + register_sysctl_paths(nf_net_netfilter_sysctl_path, + nf_ct_sysctl_table); + if (!nf_ct_sysctl_header) + goto out_unregister_netfilter; + return 0; +out_unregister_netfilter: + unregister_sysctl_table(nf_ct_netfilter_header); +out: + printk("nf_conntrack: can't register to sysctl.\n"); + return -ENOMEM; } static void nf_conntrack_standalone_fini_sysctl(void) { + unregister_sysctl_table(nf_ct_netfilter_header); unregister_sysctl_table(nf_ct_sysctl_header); } #else -- GitLab From eb49e63093498cd17382018495b8cfb5b4a679bd Mon Sep 17 00:00:00 2001 From: Joakim Koskela Date: Wed, 6 Aug 2008 02:39:30 -0700 Subject: [PATCH 0841/1024] ipsec: Interfamily IPSec BEET Here's a revised version, based on Herbert's comments, of a fix for the ipv6-inner, ipv4-outer interfamily ipsec beet mode. It fixes the network header adjustment in interfamily, and doesn't reserve space for the pseudo header anymore when we have ipv6 as the inner family. Signed-off-by: Joakim Koskela Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv4/esp4.c | 2 +- net/ipv4/xfrm4_mode_beet.c | 6 ++++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c index 4e73e5708e7..21515d4c49e 100644 --- a/net/ipv4/esp4.c +++ b/net/ipv4/esp4.c @@ -575,7 +575,7 @@ static int esp_init_state(struct xfrm_state *x) crypto_aead_ivsize(aead); if (x->props.mode == XFRM_MODE_TUNNEL) x->props.header_len += sizeof(struct iphdr); - else if (x->props.mode == XFRM_MODE_BEET) + else if (x->props.mode == XFRM_MODE_BEET && x->sel.family != AF_INET6) x->props.header_len += IPV4_BEET_PHMAXLEN; if (x->encap) { struct xfrm_encap_tmpl *encap = x->encap; diff --git a/net/ipv4/xfrm4_mode_beet.c b/net/ipv4/xfrm4_mode_beet.c index 9c798abce73..63418185f52 100644 --- a/net/ipv4/xfrm4_mode_beet.c +++ b/net/ipv4/xfrm4_mode_beet.c @@ -47,8 +47,10 @@ static int xfrm4_beet_output(struct xfrm_state *x, struct sk_buff *skb) if (unlikely(optlen)) hdrlen += IPV4_BEET_PHMAXLEN - (optlen & 4); - skb_set_network_header(skb, IPV4_BEET_PHMAXLEN - x->props.header_len - - hdrlen); + skb_set_network_header(skb, -x->props.header_len - + hdrlen + (XFRM_MODE_SKB_CB(skb)->ihl - sizeof(*top_iph))); + if (x->sel.family != AF_INET6) + skb->network_header += IPV4_BEET_PHMAXLEN; skb->mac_header = skb->network_header + offsetof(struct iphdr, protocol); skb->transport_header = skb->network_header + sizeof(*top_iph); -- GitLab From abf5cdb89d09ca981db10e1a85fd8531440165f2 Mon Sep 17 00:00:00 2001 From: Joakim Koskela Date: Wed, 6 Aug 2008 02:40:25 -0700 Subject: [PATCH 0842/1024] ipsec: Interfamily IPSec BEET, ipv4-inner ipv6-outer Here's a revised version, based on Herbert's comments, of a fix for the ipv4-inner, ipv6-outer interfamily ipsec beet mode. It fixes the network header adjustment during interfamily, as well as makes sure that we reserve enough room for the new ipv6 header if we might have something else as the inner family. Also, the ipv4 pseudo header construction was added. Signed-off-by: Joakim Koskela Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv6/esp6.c | 4 ++++ net/ipv6/xfrm6_mode_beet.c | 29 ++++++++++++++++++++++++++--- 2 files changed, 30 insertions(+), 3 deletions(-) diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c index c6bb4c6d24b..b181b08fb76 100644 --- a/net/ipv6/esp6.c +++ b/net/ipv6/esp6.c @@ -521,6 +521,10 @@ static int esp6_init_state(struct xfrm_state *x) crypto_aead_ivsize(aead); switch (x->props.mode) { case XFRM_MODE_BEET: + if (x->sel.family != AF_INET6) + x->props.header_len += IPV4_BEET_PHMAXLEN + + (sizeof(struct ipv6hdr) - sizeof(struct iphdr)); + break; case XFRM_MODE_TRANSPORT: break; case XFRM_MODE_TUNNEL: diff --git a/net/ipv6/xfrm6_mode_beet.c b/net/ipv6/xfrm6_mode_beet.c index d6ce400f585..bbd48b101ba 100644 --- a/net/ipv6/xfrm6_mode_beet.c +++ b/net/ipv6/xfrm6_mode_beet.c @@ -40,16 +40,39 @@ static void xfrm6_beet_make_header(struct sk_buff *skb) static int xfrm6_beet_output(struct xfrm_state *x, struct sk_buff *skb) { struct ipv6hdr *top_iph; - - skb_set_network_header(skb, -x->props.header_len); + struct ip_beet_phdr *ph; + struct iphdr *iphv4; + int optlen, hdr_len; + + iphv4 = ip_hdr(skb); + hdr_len = 0; + optlen = XFRM_MODE_SKB_CB(skb)->optlen; + if (unlikely(optlen)) + hdr_len += IPV4_BEET_PHMAXLEN - (optlen & 4); + + skb_set_network_header(skb, -x->props.header_len - hdr_len); + if (x->sel.family != AF_INET6) + skb->network_header += IPV4_BEET_PHMAXLEN; skb->mac_header = skb->network_header + offsetof(struct ipv6hdr, nexthdr); skb->transport_header = skb->network_header + sizeof(*top_iph); - __skb_pull(skb, XFRM_MODE_SKB_CB(skb)->ihl); + ph = (struct ip_beet_phdr *)__skb_pull(skb, XFRM_MODE_SKB_CB(skb)->ihl-hdr_len); xfrm6_beet_make_header(skb); top_iph = ipv6_hdr(skb); + if (unlikely(optlen)) { + + BUG_ON(optlen < 0); + + ph->padlen = 4 - (optlen & 4); + ph->hdrlen = optlen / 8; + ph->nexthdr = top_iph->nexthdr; + if (ph->padlen) + memset(ph + 1, IPOPT_NOP, ph->padlen); + + top_iph->nexthdr = IPPROTO_BEETPH; + } ipv6_addr_copy(&top_iph->saddr, (struct in6_addr *)&x->props.saddr); ipv6_addr_copy(&top_iph->daddr, (struct in6_addr *)&x->id.daddr); -- GitLab From 8c6a5cad1eec38c2bf3af94eb2d4350be29fa208 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Wed, 6 Aug 2008 02:43:24 -0700 Subject: [PATCH 0843/1024] sparc: i8042-sparcio.h: fix warning drivers/input/serio/i8042-sparcio.h:95: warning: 'sparc_i8042_driver' defined but not used Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller --- drivers/input/serio/i8042-sparcio.h | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h index d9ca55891cd..66bafe308b0 100644 --- a/drivers/input/serio/i8042-sparcio.h +++ b/drivers/input/serio/i8042-sparcio.h @@ -41,6 +41,8 @@ static inline void i8042_write_command(int val) writeb(val, kbd_iobase + 0x64UL); } +#ifdef CONFIG_PCI + #define OBP_PS2KBD_NAME1 "kb_ps2" #define OBP_PS2KBD_NAME2 "keyboard" #define OBP_PS2MS_NAME1 "kdmouse" @@ -101,9 +103,6 @@ static struct of_platform_driver sparc_i8042_driver = { static int __init i8042_platform_init(void) { -#ifndef CONFIG_PCI - return -ENODEV; -#else struct device_node *root = of_find_node_by_path("/"); if (!strcmp(root->name, "SUNW,JavaStation-1")) { @@ -131,17 +130,25 @@ static int __init i8042_platform_init(void) i8042_reset = 1; return 0; -#endif /* CONFIG_PCI */ } static inline void i8042_platform_exit(void) { -#ifdef CONFIG_PCI struct device_node *root = of_find_node_by_path("/"); if (strcmp(root->name, "SUNW,JavaStation-1")) of_unregister_driver(&sparc_i8042_driver); -#endif } +#else /* !CONFIG_PCI */ +static int __init i8042_platform_init(void) +{ + return -ENODEV; +} + +static inline void i8042_platform_exit(void) +{ +} +#endif /* !CONFIG_PCI */ + #endif /* _I8042_SPARCIO_H */ -- GitLab From edc9189c879af8cc8f1bf9746e63c5b014801a8a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 28 Jul 2008 15:39:38 -0300 Subject: [PATCH 0844/1024] V4L/DVB (8549a): fix kernel-doc warning, function name, and docbook filename Change function name in kernel-doc and add kernel-doc for parameter @index: Warning(linhead//drivers/media/video/videodev.c:2090): No description found for parameter 'index' Also change source file name in DocBook/videobook.tmpl to match the new source file name. Signed-off-by: Randy Dunlap Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/videobook.tmpl | 2 +- drivers/media/video/v4l2-dev.c | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl index 89817795e66..0bc25949b66 100644 --- a/Documentation/DocBook/videobook.tmpl +++ b/Documentation/DocBook/videobook.tmpl @@ -1648,7 +1648,7 @@ static struct video_buffer capture_fb; Public Functions Provided -!Edrivers/media/video/videodev.c +!Edrivers/media/video/v4l2-dev.c diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 556615fe93d..6f36006aecd 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -222,11 +222,13 @@ int video_register_device(struct video_device *vfd, int type, int nr) EXPORT_SYMBOL(video_register_device); /** - * video_register_device - register video4linux devices + * video_register_device_index - register video4linux devices * @vfd: video device structure we want to register * @type: type of device to register * @nr: which device number (0 == /dev/video0, 1 == /dev/video1, ... * -1 == first free) + * @index: stream number based on parent device; + * -1 if auto assign, requested number otherwise * * The registration code assigns minor numbers based on the type * requested. -ENFILE is returned in all the device slots for this -- GitLab From 738608ae08572bf915c3fcd40e9579fbca06464b Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 28 Jul 2008 06:41:51 -0300 Subject: [PATCH 0845/1024] V4L/DVB (8550): gspca: Change a bit the init of ov7660 and Sonix JPEG bridges. Set back some values of gspcav1 in init of sonixj sensor ov7660. Add some comments. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 46 ++++++++++++++---------------- 1 file changed, 21 insertions(+), 25 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 33a3df1f691..65452f3b194 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -360,17 +360,15 @@ static const __u8 ov7660_sensor_init[][8] = { {0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset SCCB */ /* (delay 20ms) */ {0xa1, 0x21, 0x12, 0x05, 0x00, 0x00, 0x00, 0x10}, - /* Outformat ?? rawRGB */ + /* Outformat = rawRGB */ {0xa1, 0x21, 0x13, 0xb8, 0x00, 0x00, 0x00, 0x10}, /* init COM8 */ - {0xd1, 0x21, 0x00, 0x01, 0x74, 0x92, 0x00, 0x10}, -/* {0xd1, 0x21, 0x00, 0x01, 0x74, 0x74, 0x00, 0x10}, */ + {0xd1, 0x21, 0x00, 0x01, 0x74, 0x74, 0x00, 0x10}, /* GAIN BLUE RED VREF */ {0xd1, 0x21, 0x04, 0x00, 0x7d, 0x62, 0x00, 0x10}, /* COM 1 BAVE GEAVE AECHH */ {0xb1, 0x21, 0x08, 0x83, 0x01, 0x00, 0x00, 0x10}, /* RAVE COM2 */ {0xd1, 0x21, 0x0c, 0x00, 0x08, 0x04, 0x4f, 0x10}, /* COM 3 4 5 6 */ - {0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xf8, 0x10}, -/* {0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xff, 0x10}, */ + {0xd1, 0x21, 0x10, 0x7f, 0x40, 0x05, 0xff, 0x10}, /* AECH CLKRC COM7 COM8 */ {0xc1, 0x21, 0x14, 0x2c, 0x00, 0x02, 0x00, 0x10}, /* COM9 COM10 */ {0xd1, 0x21, 0x17, 0x10, 0x60, 0x02, 0x7b, 0x10}, @@ -379,8 +377,8 @@ static const __u8 ov7660_sensor_init[][8] = { {0xb1, 0x21, 0x1e, 0x01, 0x0e, 0x00, 0x00, 0x10}, /* MVFP LAEC */ {0xd1, 0x21, 0x20, 0x07, 0x07, 0x07, 0x07, 0x10}, /* BOS GBOS GROS ROS (BGGR offset) */ - {0xd1, 0x21, 0x24, 0x68, 0x58, 0xd4, 0x80, 0x10}, -/* {0xd1, 0x21, 0x24, 0x78, 0x68, 0xd4, 0x80, 0x10}, */ +/* {0xd1, 0x21, 0x24, 0x68, 0x58, 0xd4, 0x80, 0x10}, */ + {0xd1, 0x21, 0x24, 0x78, 0x68, 0xd4, 0x80, 0x10}, /* AEW AEB VPT BBIAS */ {0xd1, 0x21, 0x28, 0x80, 0x30, 0x00, 0x00, 0x10}, /* GbBIAS RSVD EXHCH EXHCL */ @@ -407,9 +405,9 @@ static const __u8 ov7660_sensor_init[][8] = { {0xd1, 0x21, 0x62, 0x00, 0x00, 0x50, 0x30, 0x10}, /* LCC1 LCC2 LCC3 LCC4 */ {0xa1, 0x21, 0x66, 0x00, 0x00, 0x00, 0x00, 0x10}, /* LCC5 */ - {0xd1, 0x21, 0x67, 0x80, 0x7a, 0x90, 0x80, 0x10}, + {0xd1, 0x21, 0x67, 0x80, 0x7a, 0x90, 0x80, 0x10}, /* MANU */ {0xa1, 0x21, 0x6b, 0x0a, 0x00, 0x00, 0x00, 0x10}, - /* band gap reference [0..3] DBLV */ + /* band gap reference [0:3] DBLV */ {0xd1, 0x21, 0x6c, 0x30, 0x48, 0x80, 0x74, 0x10}, /* gamma curve */ {0xd1, 0x21, 0x70, 0x64, 0x60, 0x5c, 0x58, 0x10}, /* gamma curve */ {0xd1, 0x21, 0x74, 0x54, 0x4c, 0x40, 0x38, 0x10}, /* gamma curve */ @@ -419,37 +417,35 @@ static const __u8 ov7660_sensor_init[][8] = { {0xd1, 0x21, 0x84, 0x6e, 0x77, 0x87, 0x95, 0x10}, /* gamma curve */ {0xc1, 0x21, 0x88, 0xaf, 0xc7, 0xdf, 0x00, 0x10}, /* gamma curve */ {0xc1, 0x21, 0x8b, 0x99, 0x99, 0xcf, 0x00, 0x10}, /* reserved */ - {0xb1, 0x21, 0x92, 0x00, 0x00, 0x00, 0x00, 0x10}, + {0xb1, 0x21, 0x92, 0x00, 0x00, 0x00, 0x00, 0x10}, /* DM_LNL/H */ /****** (some exchanges in the win trace) ******/ - {0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10}, /* MVFP */ /* bits[3..0]reserved */ {0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x03, 0x00, 0x00, 0x00, 0x00, 0x10}, /* VREF vertical frame ctrl */ {0xa1, 0x21, 0x03, 0x00, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x21, 0x10, 0x20, 0x00, 0x00, 0x00, 0x10}, /* 0x20 */ - {0xa1, 0x21, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x21, 0x2e, 0x00, 0x00, 0x00, 0x00, 0x10}, -/* {0xa1, 0x21, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x10}, */ - {0xa1, 0x21, 0x00, 0x0a, 0x00, 0x00, 0x00, 0x10}, - {0xb1, 0x21, 0x01, 0x78, 0x78, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x10, 0x20, 0x00, 0x00, 0x00, 0x10}, /* AECH 0x20 */ + {0xa1, 0x21, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x10}, /* ADVFL */ + {0xa1, 0x21, 0x2e, 0x00, 0x00, 0x00, 0x00, 0x10}, /* ADVFH */ + {0xa1, 0x21, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x10}, /* GAIN */ +/* {0xb1, 0x21, 0x01, 0x78, 0x78, 0x00, 0x00, 0x10}, * BLUE */ /****** (some exchanges in the win trace) ******/ {0xa1, 0x21, 0x93, 0x00, 0x00, 0x00, 0x00, 0x10},/* dummy line hight */ - {0xa1, 0x21, 0x92, 0x25, 0x00, 0x00, 0x00, 0x10},/* dummy line low */ - {0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x21, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10}, - {0xa1, 0x21, 0x02, 0x90, 0x00, 0x00, 0x00, 0x10}, + {0xa1, 0x21, 0x92, 0x25, 0x00, 0x00, 0x00, 0x10}, /* dummy line low */ + {0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10}, /* EXHCH */ + {0xa1, 0x21, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10}, /* EXHCL */ +/* {0xa1, 0x21, 0x02, 0x90, 0x00, 0x00, 0x00, 0x10}, * RED */ /****** (some exchanges in the win trace) ******/ -/**********startsensor KO if changed !!****/ +/******!! startsensor KO if changed !!****/ {0xa1, 0x21, 0x93, 0x01, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x92, 0xff, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10}, {0xa1, 0x21, 0x2b, 0xc3, 0x00, 0x00, 0x00, 0x10}, -/* here may start the isoc exchanges */ {} }; -/* reg0x04 reg0x07 reg 0x10 */ -/* expo = (COM1 & 0x02) | (AECHH & 0x2f <<10) [ (AECh << 2) */ +/* reg 0x04 reg 0x07 reg 0x10 */ +/* expo = (COM1 & 0x02) | ((AECHH & 0x2f) << 10) | (AECh << 2) */ static const __u8 ov7648_sensor_init[][8] = { {0xC1, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00}, -- GitLab From b01466e14ce82ff96b74db19ebdaefb34a430a24 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Mon, 28 Jul 2008 07:52:27 -0300 Subject: [PATCH 0846/1024] V4L/DVB (8552): gspca: Bad pixel format in the spca508 subdriver. The pixel format should have been changed in changeset 6de914aaad86. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/spca508.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c index b608a27ad11..6e213cf24cb 100644 --- a/drivers/media/video/gspca/spca508.c +++ b/drivers/media/video/gspca/spca508.c @@ -63,22 +63,22 @@ static struct ctrl sd_ctrls[] = { }; static struct v4l2_pix_format sif_mode[] = { - {160, 120, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE, + {160, 120, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, .bytesperline = 160 * 3, .sizeimage = 160 * 120 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 3}, - {176, 144, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE, + {176, 144, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, .bytesperline = 176 * 3, .sizeimage = 176 * 144 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 2}, - {320, 240, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE, + {320, 240, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, .bytesperline = 320 * 3, .sizeimage = 320 * 240 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, - {352, 288, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE, + {352, 288, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, .bytesperline = 352 * 3, .sizeimage = 352 * 288 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, -- GitLab From 35774f42dc6e765fc1d8a92f36e218f617a17e1a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 28 Jul 2008 18:07:35 -0300 Subject: [PATCH 0847/1024] V4L/DVB (8558): media/video/Kconfig: fix a typo Thanks to Hermann Gausterer for pointing this issue. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index d4a6e56a713..ecbfa1b39b7 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -630,7 +630,7 @@ config VIDEO_ZORAN_ZR36060 depends on VIDEO_ZORAN help Say Y to support Zoran boards based on 36060 chips. - This includes Iomega Bus, Pinnacle DC10, Linux media Labs 33 + This includes Iomega Buz, Pinnacle DC10, Linux media Labs 33 and 33 R10 and AverMedia 6 boards. config VIDEO_ZORAN_BUZ -- GitLab From 886f8d678a28882c193c2886c7280c0eccd8c9dd Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 28 Jul 2008 16:58:05 -0300 Subject: [PATCH 0848/1024] V4L/DVB (8562): DVB_DRX397XD: remove FW_LOADER select Also for the new DVB_DRX397XD driver the FW_LOADER select and the corresponding dependency on HOTPLUG can be removed. Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 574dffe91b6..7dbb4a223c9 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -135,9 +135,8 @@ config DVB_CX22702 config DVB_DRX397XD tristate "Micronas DRX3975D/DRX3977D based" - depends on DVB_CORE && I2C && HOTPLUG + depends on DVB_CORE && I2C default m if DVB_FE_CUSTOMISE - select FW_LOADER help A DVB-T tuner module. Say Y when you want to support this frontend. -- GitLab From dfb9aff025c4c874f9169e2fd690ce6fee2309fe Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 28 Jul 2008 16:58:19 -0300 Subject: [PATCH 0849/1024] V4L/DVB (8563): fix drivers/media/video/arv.c compilation This patch fixes the following compile errors: <-- snip --> ... CC [M] drivers/media/video/arv.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/media/video/arv.c: In function 'ar_ioctl': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/media/video/arv.c:544: error: implicit declaration of function 'video_usercopy' /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/media/video/arv.c: At top level: /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/media/video/arv.c:758: error: unknown field 'type' specified in initializer make[4]: *** [drivers/media/video/arv.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/arv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c index 56ebfd5ef6f..9e436ad3d34 100644 --- a/drivers/media/video/arv.c +++ b/drivers/media/video/arv.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -755,7 +756,6 @@ static const struct file_operations ar_fops = { static struct video_device ar_template = { .name = "Colour AR VGA", - .type = VID_TYPE_CAPTURE, .fops = &ar_fops, .release = ar_release, .minor = -1, -- GitLab From c2cfcf701881c9a4ef42d5a956f9f2d006c2af8e Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Tue, 29 Jul 2008 05:30:58 -0300 Subject: [PATCH 0850/1024] V4L/DVB (8564): fix vino driver build error The vino driver needs #include drivers/media/video/vino.c: In function 'vino_ioctl': drivers/media/video/vino.c:4364: error: implicit declaration of function 'video_usercopy' make[3]: *** [drivers/media/video/vino.o] Error 1 Signed-off-by: Yoichi Yuasa Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/vino.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c index ef7572cbc4a..1edda456fc6 100644 --- a/drivers/media/video/vino.c +++ b/drivers/media/video/vino.c @@ -41,6 +41,7 @@ #include #include #include +#include #include #include -- GitLab From 0cd6759da646aae9d117df278ce3d5f3cab31904 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Tue, 29 Jul 2008 05:25:28 -0300 Subject: [PATCH 0851/1024] V4L/DVB (8567): gspca: hflip and vflip controls added for ov519 - ov7670 plus init cleanup. The hflip and vflip controls work for ov7670 only. This bridge/sensor inverts blue and red - not fixed. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 114 +++++++++++++++++++++++++----- 1 file changed, 98 insertions(+), 16 deletions(-) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 83139efc462..b825941089b 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -48,6 +48,8 @@ struct sd { unsigned char brightness; unsigned char contrast; unsigned char colors; + __u8 hflip; + __u8 vflip; char compress; /* Should the next frame be compressed? */ char compress_inited; /* Are compression params uploaded? */ @@ -77,6 +79,10 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val); static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val); static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val); +static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { #define SD_BRIGHTNESS 0 @@ -121,6 +127,35 @@ static struct ctrl sd_ctrls[] = { .set = sd_setcolors, .get = sd_getcolors, }, +/* next controls work with ov7670 only */ + { + { + .id = V4L2_CID_HFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Mirror", + .minimum = 0, + .maximum = 1, + .step = 1, +#define HFLIP_DEF 0 + .default_value = HFLIP_DEF, + }, + .set = sd_sethflip, + .get = sd_gethflip, + }, + { + { + .id = V4L2_CID_VFLIP, + .type = V4L2_CTRL_TYPE_BOOLEAN, + .name = "Vflip", + .minimum = 0, + .maximum = 1, + .step = 1, +#define VFLIP_DEF 0 + .default_value = VFLIP_DEF, + }, + .set = sd_setvflip, + .get = sd_getvflip, + }, }; static struct v4l2_pix_format vga_mode[] = { @@ -225,6 +260,7 @@ static struct v4l2_pix_format sif_mode[] = { #define OV7670_REG_VSTART 0x19 /* Vert start high bits */ #define OV7670_REG_VSTOP 0x1a /* Vert stop high bits */ #define OV7670_REG_MVFP 0x1e /* Mirror / vflip */ +#define OV7670_MVFP_VFLIP 0x10 /* vertical flip */ #define OV7670_MVFP_MIRROR 0x20 /* Mirror image */ #define OV7670_REG_AEW 0x24 /* AGC upper limit */ #define OV7670_REG_AEB 0x25 /* AGC lower limit */ @@ -930,7 +966,10 @@ static int ov7xx0_configure(struct sd *sd) { OV7670_REG_EDGE, 0 }, { 0x75, 0x05 }, { 0x76, 0xe1 }, { 0x4c, 0 }, { 0x77, 0x01 }, - { OV7670_REG_COM13, 0xc3 }, { 0x4b, 0x09 }, + { OV7670_REG_COM13, OV7670_COM13_GAMMA + | OV7670_COM13_UVSAT + | 2}, /* was 3 */ + { 0x4b, 0x09 }, { 0xc9, 0x60 }, { OV7670_REG_COM16, 0x38 }, { 0x56, 0x40 }, @@ -957,19 +996,6 @@ static int ov7xx0_configure(struct sd *sd) { 0x79, 0x05 }, { 0xc8, 0x30 }, { 0x79, 0x26 }, - /* Format YUV422 */ - { OV7670_REG_COM7, OV7670_COM7_YUV }, /* Selects YUV mode */ - { OV7670_REG_RGB444, 0 }, /* No RGB444 please */ - { OV7670_REG_COM1, 0 }, - { OV7670_REG_COM15, OV7670_COM15_R00FF }, - { OV7670_REG_COM9, 0x18 }, - /* 4x gain ceiling; 0x8 is reserved bit */ - { 0x4f, 0x80 }, /* "matrix coefficient 1" */ - { 0x50, 0x80 }, /* "matrix coefficient 2" */ - { 0x52, 0x22 }, /* "matrix coefficient 4" */ - { 0x53, 0x5e }, /* "matrix coefficient 5" */ - { 0x54, 0x80 }, /* "matrix coefficient 6" */ - { OV7670_REG_COM13, OV7670_COM13_GAMMA|OV7670_COM13_UVSAT }, }; PDEBUG(D_PROBE, "starting OV7xx0 configuration"); @@ -1375,6 +1401,8 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value; sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value; sd->colors = sd_ctrls[SD_COLOR].qctrl.default_value; + sd->hflip = HFLIP_DEF; + sd->vflip = VFLIP_DEF; return 0; error: PDEBUG(D_ERR, "OV519 Config failed"); @@ -1682,6 +1710,26 @@ static int mode_init_ov_sensor_regs(struct sd *sd, return 0; } +static void sethflip(struct sd *sd) +{ + if (sd->gspca_dev.streaming) + ov51x_stop(sd); + i2c_w_mask(sd, OV7670_REG_MVFP, + OV7670_MVFP_MIRROR * sd->hflip, OV7670_MVFP_MIRROR); + if (sd->gspca_dev.streaming) + ov51x_restart(sd); +} + +static void setvflip(struct sd *sd) +{ + if (sd->gspca_dev.streaming) + ov51x_stop(sd); + i2c_w_mask(sd, OV7670_REG_MVFP, + OV7670_MVFP_VFLIP * sd->vflip, OV7670_MVFP_VFLIP); + if (sd->gspca_dev.streaming) + ov51x_restart(sd); +} + static int set_ov_sensor_window(struct sd *sd, struct ovsensor_window *win) { @@ -1811,7 +1859,8 @@ static int set_ov_sensor_window(struct sd *sd, msleep(10); /* need to sleep between read and write to * same reg! */ i2c_w(sd, OV7670_REG_VREF, v); - + sethflip(sd); + setvflip(sd); } else { i2c_w(sd, 0x17, hwsbase + (win->x >> hwscale)); i2c_w(sd, 0x18, hwebase + ((win->x + win->width) >> hwscale)); @@ -2110,6 +2159,40 @@ static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->hflip = val; + sethflip(sd); + return 0; +} + +static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->hflip; + return 0; +} + +static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->vflip = val; + setvflip(sd); + return 0; +} + +static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->vflip; + return 0; +} + /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, @@ -2178,4 +2261,3 @@ module_exit(sd_mod_exit); module_param(frame_rate, int, 0644); MODULE_PARM_DESC(frame_rate, "Frame rate (5, 10, 15, 20 or 30 fps)"); - -- GitLab From 8f47a3cefbb275893ce26ade7094599e4b129bb3 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Tue, 29 Jul 2008 14:14:04 -0300 Subject: [PATCH 0852/1024] V4L/DVB (8569): gspca: Set back the old values of Sonix sn9c120 and cleanup source. The values from win traces do not seem to work while the webcams did work with gspca v1. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/sonixj.c | 184 +++++++++-------------------- 1 file changed, 59 insertions(+), 125 deletions(-) diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index 65452f3b194..b60ff600a75 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -148,55 +148,58 @@ static struct v4l2_pix_format vga_mode[] = { /*Data from sn9c102p+hv71331r */ static const __u8 sn_hv7131[] = { -/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 reg9 */ - 0x00, 0x03, 0x64, 0x00, 0x1A, 0x20, 0x20, 0x20, 0xA1, 0x11, -/* rega regb regc regd rege regf reg10 reg11 */ - 0x02, 0x09, 0x00, 0x00, 0x00, 0x10, 0x03, 0x00, /* 00 */ -/* reg12 reg13 reg14 reg15 reg16 reg17 reg18 reg19 reg1a reg1b */ - 0x00, 0x01, 0x03, 0x28, 0x1e, 0x41, 0x0a, 0x00, 0x00, 0x00, -/* reg1c reg1d reg1e reg1f reg20 reg21 reg22 reg23 */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ + 0x00, 0x03, 0x64, 0x00, 0x1a, 0x20, 0x20, 0x20, +/* reg8 reg9 rega regb regc regd rege regf */ + 0xa1, 0x11, 0x02, 0x09, 0x00, 0x00, 0x00, 0x10, +/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ + 0x03, 0x00, 0x00, 0x01, 0x03, 0x28, 0x1e, 0x41, +/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */ + 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; static const __u8 sn_mi0360[] = { -/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 reg9 */ - 0x00, 0x61, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, 0xb1, 0x5d, -/* rega regb regc regd rege regf reg10 reg11 */ - 0x07, 0x00, 0x00, 0x00, 0x00, 0x10, 0x03, 0x00, -/* reg12 reg13 reg14 reg15 reg16 reg17 reg18 reg19 reg1a reg1b */ - 0x00, 0x02, 0x0a, 0x28, 0x1e, 0x61, 0x06, 0x00, 0x00, 0x00, -/* reg1c reg1d reg1e reg1f reg20 reg21 reg22 reg23 */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ + 0x00, 0x61, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, +/* reg8 reg9 rega regb regc regd rege regf */ + 0xb1, 0x5d, 0x07, 0x00, 0x00, 0x00, 0x00, 0x10, +/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ + 0x03, 0x00, 0x00, 0x02, 0x0a, 0x28, 0x1e, 0x61, +/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */ + 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; static const __u8 sn_mo4000[] = { -/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 */ - 0x12, 0x23, 0x60, 0x00, 0x1A, 0x00, 0x20, 0x18, 0x81, -/* reg9 rega regb regc regd rege regf reg10 reg11*/ - 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, -/* reg12 reg13 reg14 reg15 reg16 reg17 reg18 reg19 reg1a*/ - 0x0b, 0x0f, 0x14, 0x28, 0x1e, 0x40, 0x08, 0x00, 0x00, -/* reg1b reg1c reg1d reg1e reg1f reg20 reg21 reg22 reg23*/ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x25, 0x39, 0x4b, - 0x5c, 0x6b, 0x79, 0x87, 0x95, 0xa2, 0xaf, 0xbb, 0xc7, - 0xd3, 0xdf, 0xea, 0xf5 +/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ + 0x12, 0x23, 0x60, 0x00, 0x1a, 0x00, 0x20, 0x18, +/* reg8 reg9 rega regb regc regd rege regf */ + 0x81, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ + 0x03, 0x00, 0x0b, 0x0f, 0x14, 0x28, 0x1e, 0x40, +/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */ + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; static const __u8 sn_ov7648[] = { - 0x00, 0x21, 0x62, 0x00, 0x1a, 0x20, 0x20, 0x20, 0xA1, 0x6E, 0x18, 0x65, - 0x00, 0x00, 0x00, 0x10, 0x03, 0x00, 0x00, 0x06, 0x06, 0x28, 0x1E, 0x82, - 0x07, 0x00, 0x00, 0x00, 0x00, 0x00 +/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ + 0x00, 0x21, 0x62, 0x00, 0x1a, 0x20, 0x20, 0x20, +/* reg8 reg9 rega regb regc regd rege regf */ + 0xa1, 0x6e, 0x18, 0x65, 0x00, 0x00, 0x00, 0x10, +/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ + 0x03, 0x00, 0x00, 0x06, 0x06, 0x28, 0x1e, 0x82, +/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */ + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00 }; static const __u8 sn_ov7660[] = { -/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 */ - 0x00, 0x61, 0x40, 0x00, 0x1a, 0x00, 0x00, 0x00, 0x81, -/* reg9 rega regb regc regd rege regf reg10 reg11*/ - 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, -/* reg12 reg13 reg14 reg15 reg16 reg17 reg18 reg19 reg1a*/ - 0x01, 0x01, 0x14, 0x28, 0x1e, 0x00, 0x07, 0x00, 0x00, -/* reg1b reg1c reg1d reg1e reg1f reg20 reg21 reg22 reg23*/ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */ + 0x00, 0x61, 0x40, 0x00, 0x1a, 0x20, 0x20, 0x20, +/* reg8 reg9 rega regb regc regd rege regf */ + 0x81, 0x21, 0x07, 0x00, 0x00, 0x00, 0x00, 0x10, +/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */ + 0x03, 0x00, 0x01, 0x01, 0x08, 0x28, 0x1e, 0x20, +/* reg18 reg19 reg1a reg1b reg1c reg1d reg1e reg1f */ + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, }; /* sequence specific to the sensors - !! index = SENSOR_xxx */ @@ -212,10 +215,6 @@ static const __u8 regsn20[] = { 0x00, 0x2d, 0x46, 0x5a, 0x6c, 0x7c, 0x8b, 0x99, 0xa6, 0xb2, 0xbf, 0xca, 0xd5, 0xe0, 0xeb, 0xf5, 0xff }; -static const __u8 regsn20_sn9c120[] = { - 0x00, 0x25, 0x3c, 0x50, 0x62, 0x72, 0x81, 0x90, - 0x9e, 0xab, 0xb8, 0xc5, 0xd1, 0xdd, 0xe9, 0xf4, 0xff -}; static const __u8 regsn20_sn9c325[] = { 0x0a, 0x3a, 0x56, 0x6c, 0x7e, 0x8d, 0x9a, 0xa4, 0xaf, 0xbb, 0xc5, 0xcd, 0xd5, 0xde, 0xe8, 0xed, 0xf5 @@ -227,21 +226,6 @@ static const __u8 reg84[] = { /* 0x00, 0x00, 0x00, 0x00, 0x00 */ 0xf7, 0x0f, 0x0a, 0x00, 0x00 }; -static const __u8 reg84_sn9c120_1[] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0c, 0x00, 0x00 -}; -static const __u8 reg84_sn9c120_2[] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0c, 0x02, 0x3b -}; -static const __u8 reg84_sn9c120_3[] = { - 0x14, 0x00, 0x27, 0x00, 0x08, 0x00, 0xeb, 0x0f, - 0xd5, 0x0f, 0x42, 0x00, 0x41, 0x00, 0xca, 0x0f, - 0xf5, 0x0f, 0x0c, 0x02, 0x3b -}; static const __u8 reg84_sn9c325[] = { 0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe4, 0x0f, 0xd3, 0x0f, 0x4b, 0x00, 0x48, 0x00, 0xc0, 0x0f, @@ -676,13 +660,12 @@ static int configure_gpio(struct gspca_dev *gspca_dev, const __u8 *reg9a; static const __u8 reg9a_def[] = {0x08, 0x40, 0x20, 0x10, 0x00, 0x04}; - static const __u8 reg9a_sn9c120[] = /* from win trace */ - {0x00, 0x40, 0x38, 0x30, 0x00, 0x20}; static const __u8 reg9a_sn9c325[] = {0x0a, 0x40, 0x38, 0x30, 0x00, 0x20}; + static const __u8 regd4[] = {0x60, 0x00, 0x00}; reg_w1(gspca_dev, 0xf1, 0x00); - reg_w1(gspca_dev, 0x01, sn9c1xx[0]); /*fixme:jfm was [1] en v1*/ + reg_w1(gspca_dev, 0x01, 0x00); /*jfm was sn9c1xx[1] in v1*/ /* configure gpio */ reg_w(gspca_dev, 0x01, &sn9c1xx[1], 2); @@ -692,25 +675,17 @@ static int configure_gpio(struct gspca_dev *gspca_dev, case BRIDGE_SN9C325: reg9a = reg9a_sn9c325; break; - case BRIDGE_SN9C120: - reg9a = reg9a_sn9c120; - break; default: reg9a = reg9a_def; break; } reg_w(gspca_dev, 0x9a, reg9a, 6); - reg_w1(gspca_dev, 0xd4, 0x60); /*fixme:jfm 60 00 00 (3) ? */ + reg_w(gspca_dev, 0xd4, regd4, sizeof regd4); /*fixme:jfm was 60 only*/ reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f); switch (sd->bridge) { - case BRIDGE_SN9C120: /* from win trace */ - reg_w1(gspca_dev, 0x01, 0x61); - reg_w1(gspca_dev, 0x17, 0x20); - reg_w1(gspca_dev, 0x01, 0x60); - break; case BRIDGE_SN9C325: reg_w1(gspca_dev, 0x01, 0x43); reg_w1(gspca_dev, 0x17, 0xae); @@ -819,10 +794,11 @@ static int sd_open(struct gspca_dev *gspca_dev) /* setup a selector by bridge */ reg_w1(gspca_dev, 0xf1, 0x01); - reg_r(gspca_dev, 0x00, 1); /* -> regF1 = 0x00 */ - reg_w1(gspca_dev, 0xf1, gspca_dev->usb_buf[0]); reg_r(gspca_dev, 0x00, 1); + reg_w1(gspca_dev, 0xf1, gspca_dev->usb_buf[0]); + reg_r(gspca_dev, 0x00, 1); /* get sonix chip id */ regF1 = gspca_dev->usb_buf[0]; + PDEBUG(D_PROBE, "Sonix chip id: %02x", regF1); switch (sd->bridge) { case BRIDGE_SN9C102P: if (regF1 != 0x11) @@ -933,15 +909,10 @@ static void setbrightness(struct gspca_dev *gspca_dev) sd->exposure = setexposure(gspca_dev, expo); break; case SENSOR_MI0360: - expo = sd->brightness >> 4; - sd->exposure = setexposure(gspca_dev, expo); - break; case SENSOR_MO4000: expo = sd->brightness >> 4; sd->exposure = setexposure(gspca_dev, expo); break; - case SENSOR_OV7660: - return; /*jfm??*/ } k2 = sd->brightness >> 10; @@ -954,8 +925,6 @@ static void setcontrast(struct gspca_dev *gspca_dev) __u8 k2; __u8 contrast[] = { 0x00, 0x00, 0x28, 0x00, 0x07, 0x00 }; - if (sd->sensor == SENSOR_OV7660) - return; /*jfm??*/ k2 = sd->contrast; contrast[2] = k2; contrast[0] = (k2 + 1) >> 1; @@ -982,15 +951,11 @@ static void sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int i; - __u8 data; - __u8 reg1; - __u8 reg17; + __u8 reg1, reg17, reg18; const __u8 *sn9c1xx; int mode; static const __u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f }; static const __u8 CA[] = { 0x28, 0xd8, 0x14, 0xec }; - static const __u8 CA_sn9c120[] = - { 0x14, 0xec, 0x0a, 0xf6 }; /* SN9C120 */ static const __u8 CE[] = { 0x32, 0xdd, 0x2d, 0xdd }; /* MI0360 */ static const __u8 CE_sn9c325[] = { 0x32, 0xdd, 0x32, 0xdd }; /* OV7648 - SN9C325 */ @@ -998,9 +963,7 @@ static void sd_start(struct gspca_dev *gspca_dev) sn9c1xx = sn_tb[(int) sd->sensor]; configure_gpio(gspca_dev, sn9c1xx); -/*fixme:jfm this sequence should appear at end of sd_start */ -/* with - reg_w1(gspca_dev, 0x01, 0x44); */ +/* reg_w1(gspca_dev, 0x01, 0x44); jfm from win trace*/ reg_w1(gspca_dev, 0x15, sn9c1xx[0x15]); reg_w1(gspca_dev, 0x16, sn9c1xx[0x16]); reg_w1(gspca_dev, 0x12, sn9c1xx[0x12]); @@ -1012,20 +975,16 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0xc7, 0x00); reg_w1(gspca_dev, 0xc8, 0x50); reg_w1(gspca_dev, 0xc9, 0x3c); -/*fixme:jfm end of ending sequence */ reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]); switch (sd->bridge) { case BRIDGE_SN9C325: - data = 0xae; - break; - case BRIDGE_SN9C120: - data = 0xa0; + reg17 = 0xae; break; default: - data = 0x60; + reg17 = 0x60; break; } - reg_w1(gspca_dev, 0x17, data); + reg_w1(gspca_dev, 0x17, reg17); reg_w1(gspca_dev, 0x05, sn9c1xx[5]); reg_w1(gspca_dev, 0x07, sn9c1xx[7]); reg_w1(gspca_dev, 0x06, sn9c1xx[6]); @@ -1040,20 +999,6 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x9a, 0x0a); reg_w1(gspca_dev, 0x99, 0x60); break; - case BRIDGE_SN9C120: - reg_w(gspca_dev, 0x20, regsn20_sn9c120, - sizeof regsn20_sn9c120); - for (i = 0; i < 2; i++) - reg_w(gspca_dev, 0x84, reg84_sn9c120_1, - sizeof reg84_sn9c120_1); - for (i = 0; i < 6; i++) - reg_w(gspca_dev, 0x84, reg84_sn9c120_2, - sizeof reg84_sn9c120_2); - reg_w(gspca_dev, 0x84, reg84_sn9c120_3, - sizeof reg84_sn9c120_3); - reg_w1(gspca_dev, 0x9a, 0x05); - reg_w1(gspca_dev, 0x99, 0x5b); - break; default: reg_w(gspca_dev, 0x20, regsn20, sizeof regsn20); for (i = 0; i < 8; i++) @@ -1103,22 +1048,14 @@ static void sd_start(struct gspca_dev *gspca_dev) /* reg1 = 0x44; */ /* reg1 = 0x46; (done) */ } else { - reg17 = 0xa2; /* 640 */ - reg1 = 0x40; + reg17 = 0x22; /* 640 MCKSIZE */ + reg1 = 0x06; } break; } reg_w(gspca_dev, 0xc0, C0, 6); + reg_w(gspca_dev, 0xca, CA, 4); switch (sd->bridge) { - case BRIDGE_SN9C120: /*jfm ?? */ - reg_w(gspca_dev, 0xca, CA_sn9c120, 4); - break; - default: - reg_w(gspca_dev, 0xca, CA, 4); - break; - } - switch (sd->bridge) { - case BRIDGE_SN9C120: /*jfm ?? */ case BRIDGE_SN9C325: reg_w(gspca_dev, 0xce, CE_sn9c325, 4); break; @@ -1129,14 +1066,13 @@ static void sd_start(struct gspca_dev *gspca_dev) } /* here change size mode 0 -> VGA; 1 -> CIF */ - data = 0x40 | sn9c1xx[0x18] | (mode << 4); - reg_w1(gspca_dev, 0x18, data); + reg18 = sn9c1xx[0x18] | (mode << 4); + reg_w1(gspca_dev, 0x18, reg18 | 0x40); reg_w(gspca_dev, 0x100, qtable4, 0x40); reg_w(gspca_dev, 0x140, qtable4 + 0x40, 0x40); - data = sn9c1xx[0x18] | (mode << 4); - reg_w1(gspca_dev, 0x18, data); + reg_w1(gspca_dev, 0x18, reg18); reg_w1(gspca_dev, 0x17, reg17); reg_w1(gspca_dev, 0x01, reg1); @@ -1164,12 +1100,11 @@ static void sd_stopN(struct gspca_dev *gspca_dev) i2c_w8(gspca_dev, stopmi0360); data = 0x29; break; - case SENSOR_MO4000: - break; case SENSOR_OV7648: data = 0x29; break; default: +/* case SENSOR_MO4000: */ /* case SENSOR_OV7660: */ break; } @@ -1296,6 +1231,7 @@ static unsigned int getexposure(struct gspca_dev *gspca_dev) (hexpo << 10) | (mexpo << 2) | lexpo); return (hexpo << 10) | (mexpo << 2) | lexpo; default: +/* case SENSOR_OV7648: * jfm: is it ok for 7648? */ /* case SENSOR_OV7660: */ /* read sensor exposure */ i2c_r5(gspca_dev, 0x04); @@ -1314,14 +1250,12 @@ static void getbrightness(struct gspca_dev *gspca_dev) /* hardcoded registers seem not readable */ switch (sd->sensor) { case SENSOR_HV7131R: -/* sd->brightness = 0x7fff; */ sd->brightness = getexposure(gspca_dev) >> 4; break; case SENSOR_MI0360: sd->brightness = getexposure(gspca_dev) << 4; break; case SENSOR_MO4000: -/* sd->brightness = 0x1fff; */ sd->brightness = getexposure(gspca_dev) << 4; break; } -- GitLab From 335b3f88f2c3cb101059970f57860503b20d210f Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 30 Jul 2008 04:53:02 -0300 Subject: [PATCH 0853/1024] V4L/DVB (8571): gspca: Don't use CONFIG_VIDEO_ADV_DEBUG as a compile option. This option is changed to GSPCA_DEBUG and it is set by default in gspca.h. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/conex.c | 4 ++-- drivers/media/video/gspca/etoms.c | 4 ++-- drivers/media/video/gspca/gspca.c | 10 +++++----- drivers/media/video/gspca/gspca.h | 5 ++++- drivers/media/video/gspca/sonixb.c | 2 +- drivers/media/video/gspca/zc3xx.c | 6 +++--- 6 files changed, 17 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index 44b0bffeb20..cd3a3f5829b 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -123,7 +123,7 @@ static void reg_r(struct gspca_dev *gspca_dev, { struct usb_device *dev = gspca_dev->dev; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (len > sizeof gspca_dev->usb_buf) { err("reg_r: buffer overflow"); return; @@ -163,7 +163,7 @@ static void reg_w(struct gspca_dev *gspca_dev, { struct usb_device *dev = gspca_dev->dev; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (len > sizeof gspca_dev->usb_buf) { err("reg_w: buffer overflow"); return; diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c index c8c2f02fcf0..6a4e68286ef 100644 --- a/drivers/media/video/gspca/etoms.c +++ b/drivers/media/video/gspca/etoms.c @@ -233,7 +233,7 @@ static void reg_r(struct gspca_dev *gspca_dev, { struct usb_device *dev = gspca_dev->dev; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (len > sizeof gspca_dev->usb_buf) { err("reg_r: buffer overflow"); return; @@ -271,7 +271,7 @@ static void reg_w(struct gspca_dev *gspca_dev, { struct usb_device *dev = gspca_dev->dev; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (len > sizeof gspca_dev->usb_buf) { err("reg_w: buffer overflow"); return; diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 3a051c925ff..7f773e37897 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -47,7 +47,7 @@ MODULE_LICENSE("GPL"); static int video_nr = -1; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG int gspca_debug = D_ERR | D_PROBE; EXPORT_SYMBOL(gspca_debug); @@ -677,7 +677,7 @@ static int try_fmt_vid_cap(struct gspca_dev *gspca_dev, w = fmt->fmt.pix.width; h = fmt->fmt.pix.height; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (gspca_debug & D_CONF) PDEBUG_MODE("try fmt cap", fmt->fmt.pix.pixelformat, w, h); #endif @@ -785,7 +785,7 @@ static int dev_open(struct inode *inode, struct file *file) } gspca_dev->users++; file->private_data = gspca_dev; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG /* activate the v4l2 debug */ if (gspca_debug & D_V4L2) gspca_dev->vdev.debug |= 3; @@ -1080,7 +1080,7 @@ static int vidioc_streamon(struct file *file, void *priv, if (ret < 0) goto out; } -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (gspca_debug & D_STREAM) { PDEBUG_MODE("stream on OK", gspca_dev->pixfmt, @@ -1913,7 +1913,7 @@ static void __exit gspca_exit(void) module_init(gspca_init); module_exit(gspca_exit); -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG module_param_named(debug, gspca_debug, int, 0644); MODULE_PARM_DESC(debug, "Debug (bit) 0x01:error 0x02:probe 0x04:config" diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 3fd2c4eee20..67e448940ea 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -9,7 +9,10 @@ #include #include -#ifdef CONFIG_VIDEO_ADV_DEBUG +/* compilation option */ +#define GSPCA_DEBUG 1 + +#ifdef GSPCA_DEBUG /* GSPCA our debug messages */ extern int gspca_debug; #define PDEBUG(level, fmt, args...) \ diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index e18748c5a14..11210c71f66 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -408,7 +408,7 @@ static void reg_w(struct gspca_dev *gspca_dev, const __u8 *buffer, int len) { -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (len > sizeof gspca_dev->usb_buf) { PDEBUG(D_ERR|D_PACK, "reg_w: buffer overflow"); return; diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index 22a994ccb1d..bc7d0eedcd8 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -6469,7 +6469,7 @@ static void setcontrast(struct gspca_dev *gspca_dev) NULL, Tgradient_1, Tgradient_2, Tgradient_3, Tgradient_4, Tgradient_5, Tgradient_6 }; -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG __u8 v[16]; #endif @@ -6487,7 +6487,7 @@ static void setcontrast(struct gspca_dev *gspca_dev) else if (g <= 0) g = 1; reg_w(dev, g, 0x0120 + i); /* gamma */ -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (gspca_debug & D_CONF) v[i] = g; #endif @@ -6507,7 +6507,7 @@ static void setcontrast(struct gspca_dev *gspca_dev) g = 1; } reg_w(dev, g, 0x0130 + i); /* gradient */ -#ifdef CONFIG_VIDEO_ADV_DEBUG +#ifdef GSPCA_DEBUG if (gspca_debug & D_CONF) v[i] = g; #endif -- GitLab From 16fca0449997f1d77cd2d45d6c34b015f3853012 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 30 Jul 2008 05:14:38 -0300 Subject: [PATCH 0854/1024] V4L/DVB (8572): gspca: Webcam 0c45:6143 in documentation. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- Documentation/video4linux/gspca.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index bcaf4ab383b..78a863ab8a5 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -226,6 +226,7 @@ sonixj 0c45:6130 Sonix Pccam sonixj 0c45:6138 Sn9c120 Mo4000 sonixj 0c45:613b Surfer SN-206 sonixj 0c45:613c Sonix Pccam168 +sonixj 0c45:6143 Sonix Pccam168 sunplus 0d64:0303 Sunplus FashionCam DXG etoms 102c:6151 Qcam Sangha CIF etoms 102c:6251 Qcam xxxxxx VGA -- GitLab From 01b988b2abdd60cc58c7916c5f91602d2571e0c5 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 30 Jul 2008 05:33:11 -0300 Subject: [PATCH 0855/1024] V4L/DVB (8573): gspca: Bad scan of frame in spca505/506/508. Bug introduced in changeset 6de914aaad86. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/spca505.c | 2 +- drivers/media/video/gspca/spca506.c | 2 +- drivers/media/video/gspca/spca508.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c index 3c2be80cbd6..9cc178ee203 100644 --- a/drivers/media/video/gspca/spca505.c +++ b/drivers/media/video/gspca/spca505.c @@ -776,7 +776,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, default: data += 1; len -= 1; - gspca_frame_add(gspca_dev, FIRST_PACKET, frame, + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); break; } diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c index 6fe715c80ad..b4cf36a80df 100644 --- a/drivers/media/video/gspca/spca506.c +++ b/drivers/media/video/gspca/spca506.c @@ -588,7 +588,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, default: data += 1; len -= 1; - gspca_frame_add(gspca_dev, FIRST_PACKET, frame, + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); break; } diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c index 6e213cf24cb..a27686c8b84 100644 --- a/drivers/media/video/gspca/spca508.c +++ b/drivers/media/video/gspca/spca508.c @@ -1583,7 +1583,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, default: data += 1; len -= 1; - gspca_frame_add(gspca_dev, FIRST_PACKET, frame, + gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len); break; } -- GitLab From 00b27ce6205be8a943ae63d7bcce5208a9802bc3 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Wed, 30 Jul 2008 05:47:54 -0300 Subject: [PATCH 0856/1024] V4L/DVB (8574): gspca: Bad bytesperlines of pixelformat in spca505/506/508 and vc023x. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/spca505.c | 10 +++++----- drivers/media/video/gspca/spca506.c | 10 +++++----- drivers/media/video/gspca/spca508.c | 8 ++++---- drivers/media/video/gspca/vc032x.c | 4 ++-- 4 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c index 9cc178ee203..eda29d60935 100644 --- a/drivers/media/video/gspca/spca505.c +++ b/drivers/media/video/gspca/spca505.c @@ -61,27 +61,27 @@ static struct ctrl sd_ctrls[] = { static struct v4l2_pix_format vga_mode[] = { {160, 120, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 160 * 3, + .bytesperline = 160, .sizeimage = 160 * 120 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 5}, {176, 144, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 176 * 3, + .bytesperline = 176, .sizeimage = 176 * 144 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 4}, {320, 240, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 320 * 3, + .bytesperline = 320, .sizeimage = 320 * 240 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 2}, {352, 288, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 352 * 3, + .bytesperline = 352, .sizeimage = 352 * 288 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, {640, 480, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 640 * 3, + .bytesperline = 640, .sizeimage = 640 * 480 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c index b4cf36a80df..f622fa75766 100644 --- a/drivers/media/video/gspca/spca506.c +++ b/drivers/media/video/gspca/spca506.c @@ -112,27 +112,27 @@ static struct ctrl sd_ctrls[] = { static struct v4l2_pix_format vga_mode[] = { {160, 120, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 160 * 3, + .bytesperline = 160, .sizeimage = 160 * 120 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 5}, {176, 144, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 176 * 3, + .bytesperline = 176, .sizeimage = 176 * 144 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 4}, {320, 240, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 320 * 3, + .bytesperline = 320, .sizeimage = 320 * 240 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 2}, {352, 288, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 352 * 3, + .bytesperline = 352, .sizeimage = 352 * 288 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, {640, 480, V4L2_PIX_FMT_SPCA505, V4L2_FIELD_NONE, - .bytesperline = 640 * 3, + .bytesperline = 640, .sizeimage = 640 * 480 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c index a27686c8b84..699340c17de 100644 --- a/drivers/media/video/gspca/spca508.c +++ b/drivers/media/video/gspca/spca508.c @@ -64,22 +64,22 @@ static struct ctrl sd_ctrls[] = { static struct v4l2_pix_format sif_mode[] = { {160, 120, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, - .bytesperline = 160 * 3, + .bytesperline = 160, .sizeimage = 160 * 120 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 3}, {176, 144, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, - .bytesperline = 176 * 3, + .bytesperline = 176, .sizeimage = 176 * 144 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 2}, {320, 240, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, - .bytesperline = 320 * 3, + .bytesperline = 320, .sizeimage = 320 * 240 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, {352, 288, V4L2_PIX_FMT_SPCA508, V4L2_FIELD_NONE, - .bytesperline = 352 * 3, + .bytesperline = 352, .sizeimage = 352 * 288 * 3 / 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index a4221753e1b..f4a52956e0d 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -88,12 +88,12 @@ static struct ctrl sd_ctrls[] = { static struct v4l2_pix_format vc0321_mode[] = { {320, 240, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE, - .bytesperline = 320 * 2, + .bytesperline = 320, .sizeimage = 320 * 240 * 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 1}, {640, 480, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE, - .bytesperline = 640 * 2, + .bytesperline = 640, .sizeimage = 640 * 480 * 2, .colorspace = V4L2_COLORSPACE_SRGB, .priv = 0}, -- GitLab From a674a3b492d8085fd02ee49ed11cb42c63f0f71a Mon Sep 17 00:00:00 2001 From: Eugeniy Meshcheryakov Date: Fri, 1 Aug 2008 08:23:41 -0300 Subject: [PATCH 0857/1024] V4L/DVB (8582): set mts_firmware for em2882 based Pinnacle Hybrid Pro Pinnacle Hybrid Pro (2304:0226) requires mts_firmware flag to have any sound. Without this flag it is useful only for watching silent movies. Signed-off-by: Eugeniy Meshcheryakov Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 476ae44a62d..452da70e719 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1015,6 +1015,7 @@ struct em28xx_board em28xx_boards[] = { .valid = EM28XX_BOARD_NOT_VALIDATED, .vchannels = 3, .tuner_type = TUNER_XC2028, + .mts_firmware = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, -- GitLab From 594f5b8b3cce6d3137ebf260b7386520b2534385 Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Fri, 1 Aug 2008 06:37:51 -0300 Subject: [PATCH 0858/1024] V4L/DVB (8602): gspca: Fix small bugs, simplify and cleanup ov519. The hflip and vflip controls work for ov519 - ov7670 only. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 394 +++++++++++------------------- 1 file changed, 143 insertions(+), 251 deletions(-) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index b825941089b..b4f00ec0885 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -40,8 +40,7 @@ struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ /* Determined by sensor type */ - short maxwidth; - short maxheight; + char sif; unsigned char primary_i2c_slave; /* I2C write id of sensor */ @@ -85,7 +84,6 @@ static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val); static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { -#define SD_BRIGHTNESS 0 { { .id = V4L2_CID_BRIGHTNESS, @@ -94,12 +92,12 @@ static struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 255, .step = 1, - .default_value = 127, +#define BRIGHTNESS_DEF 127 + .default_value = BRIGHTNESS_DEF, }, .set = sd_setbrightness, .get = sd_getbrightness, }, -#define SD_CONTRAST 1 { { .id = V4L2_CID_CONTRAST, @@ -108,21 +106,22 @@ static struct ctrl sd_ctrls[] = { .minimum = 0, .maximum = 255, .step = 1, - .default_value = 127, +#define CONTRAST_DEF 127 + .default_value = CONTRAST_DEF, }, .set = sd_setcontrast, .get = sd_getcontrast, }, -#define SD_COLOR 2 { { .id = V4L2_CID_SATURATION, .type = V4L2_CTRL_TYPE_INTEGER, - .name = "Saturation", + .name = "Color", .minimum = 0, .maximum = 255, .step = 1, - .default_value = 127, +#define COLOR_DEF 127 + .default_value = COLOR_DEF, }, .set = sd_setcolors, .get = sd_getcolors, @@ -161,7 +160,7 @@ static struct ctrl sd_ctrls[] = { static struct v4l2_pix_format vga_mode[] = { {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 320, - .sizeimage = 320 * 240 * 3 / 8 + 589, + .sizeimage = 320 * 240 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 1}, {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, @@ -173,12 +172,12 @@ static struct v4l2_pix_format vga_mode[] = { static struct v4l2_pix_format sif_mode[] = { {176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 176, - .sizeimage = 176 * 144 * 3 / 8 + 589, + .sizeimage = 176 * 144 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 1}, {352, 288, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE, .bytesperline = 352, - .sizeimage = 352 * 288 * 3 / 8 + 589, + .sizeimage = 352 * 288 * 3 / 8 + 590, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, }; @@ -294,16 +293,6 @@ static struct v4l2_pix_format sif_mode[] = { #define OV7670_REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */ #define OV7670_REG_BD60MAX 0xab /* 60hz banding step limit */ -struct ovsensor_window { - short x; - short y; - short width; - short height; -/* int format; */ - short quarter; /* Scale width and height down 2x */ - short clockdiv; /* Clock divisor setting */ -}; - static unsigned char ov7670_abs_to_sm(unsigned char v) { if (v > 127) @@ -535,19 +524,6 @@ static int init_ov_sensor(struct sd *sd) return 0; } -/* Switch on standard JPEG compression. Returns 0 for success. */ -static int ov519_init_compression(struct sd *sd) -{ - if (!sd->compress_inited) { - if (reg_w_mask(sd, OV519_SYS_EN_CLK1, 1 << 2, 1 << 2) < 0) { - PDEBUG(D_ERR, "Error switching to compressed mode"); - return -EIO; - } - sd->compress_inited = 1; - } - return 0; -} - /* Set the read and write slave IDs. The "slave" argument is the write slave, * and the read slave will be set to (slave + 1). * This should not be called from outside the i2c I/O functions. @@ -717,21 +693,17 @@ static int ov8xx0_configure(struct sd *sd) return -1; } if ((rc & 3) == 1) { - PDEBUG(D_PROBE, "Sensor is an OV8610"); sd->sensor = SEN_OV8610; } else { PDEBUG(D_ERR, "Unknown image sensor version: %d", rc & 3); return -1; } PDEBUG(D_PROBE, "Writing 8610 registers"); - if (write_i2c_regvals(sd, - norm_8610, - sizeof norm_8610 / sizeof norm_8610[0])) + if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610))) return -1; /* Set sensor-specific vars */ - sd->maxwidth = 640; - sd->maxheight = 480; +/* sd->sif = 0; already done */ return 0; } @@ -861,7 +833,7 @@ static int ov7xx0_configure(struct sd *sd) { OV7670_REG_COM7, OV7670_COM7_RESET }, { OV7670_REG_TSLB, 0x04 }, /* OV */ { OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */ - { OV7670_REG_CLKRC, 0x1 }, + { OV7670_REG_CLKRC, 0x01 }, /* * Set the hardware window. These values from OV don't entirely * make sense - hstop is less than hstart. But they work... @@ -875,16 +847,12 @@ static int ov7xx0_configure(struct sd *sd) { 0x70, 0x3a }, { 0x71, 0x35 }, { 0x72, 0x11 }, { 0x73, 0xf0 }, { 0xa2, 0x02 }, -/* jfm */ -/* { OV7670_REG_COM10, 0x0 }, */ +/* { OV7670_REG_COM10, 0x0 }, */ /* Gamma curve values */ { 0x7a, 0x20 }, -/* jfm:win 7b=1c */ { 0x7b, 0x10 }, -/* jfm:win 7c=28 */ { 0x7c, 0x1e }, -/* jfm:win 7d=3c */ { 0x7d, 0x35 }, { 0x7e, 0x5a }, { 0x7f, 0x69 }, { 0x80, 0x76 }, { 0x81, 0x80 }, @@ -900,13 +868,11 @@ static int ov7xx0_configure(struct sd *sd) | OV7670_COM8_BFILT }, { OV7670_REG_GAIN, 0 }, { OV7670_REG_AECH, 0 }, { OV7670_REG_COM4, 0x40 }, /* magic reserved bit */ -/* jfm:win 14=38 */ { OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */ { OV7670_REG_BD50MAX, 0x05 }, { OV7670_REG_BD60MAX, 0x07 }, { OV7670_REG_AEW, 0x95 }, { OV7670_REG_AEB, 0x33 }, { OV7670_REG_VPT, 0xe3 }, { OV7670_REG_HAECC1, 0x78 }, { OV7670_REG_HAECC2, 0x68 }, -/* jfm:win a1=0b */ { 0xa1, 0x03 }, /* magic */ { OV7670_REG_HAECC3, 0xd8 }, { OV7670_REG_HAECC4, 0xd8 }, { OV7670_REG_HAECC5, 0xf0 }, { OV7670_REG_HAECC6, 0x90 }, @@ -920,8 +886,6 @@ static int ov7xx0_configure(struct sd *sd) /* Almost all of these are magic "reserved" values. */ { OV7670_REG_COM5, 0x61 }, { OV7670_REG_COM6, 0x4b }, { 0x16, 0x02 }, -/* jfm */ -/* { OV7670_REG_MVFP, 0x07|OV7670_MVFP_MIRROR }, */ { OV7670_REG_MVFP, 0x07 }, { 0x21, 0x02 }, { 0x22, 0x91 }, { 0x29, 0x07 }, { 0x33, 0x0b }, @@ -995,17 +959,10 @@ static int ov7xx0_configure(struct sd *sd) { 0x79, 0x03 }, { 0xc8, 0x40 }, { 0x79, 0x05 }, { 0xc8, 0x30 }, { 0x79, 0x26 }, - -}; + }; PDEBUG(D_PROBE, "starting OV7xx0 configuration"); -/* jfm:already done? */ - if (init_ov_sensor(sd) < 0) - PDEBUG(D_ERR, "Failed to read sensor ID"); - else - PDEBUG(D_PROBE, "OV7xx0 initialized"); - /* Detect sensor (sub)type */ rc = i2c_r(sd, OV7610_REG_COM_I); @@ -1051,20 +1008,25 @@ static int ov7xx0_configure(struct sd *sd) return low; } if (high == 0x76) { - if (low == 0x30) { + switch (low) { + case 0x30: PDEBUG(D_PROBE, "Sensor is an OV7630/OV7635"); sd->sensor = SEN_OV7630; - } else if (low == 0x40) { + break; + case 0x40: PDEBUG(D_PROBE, "Sensor is an OV7645"); sd->sensor = SEN_OV7640; /* FIXME */ - } else if (low == 0x45) { + break; + case 0x45: PDEBUG(D_PROBE, "Sensor is an OV7645B"); sd->sensor = SEN_OV7640; /* FIXME */ - } else if (low == 0x48) { + break; + case 0x48: PDEBUG(D_PROBE, "Sensor is an OV7648"); sd->sensor = SEN_OV7640; /* FIXME */ - } else { - PDEBUG(D_PROBE, "Unknown sensor: 0x76%X", low); + break; + default: + PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low); return -1; } } else { @@ -1076,34 +1038,34 @@ static int ov7xx0_configure(struct sd *sd) return -1; } - if (sd->sensor == SEN_OV7620) { + switch (sd->sensor) { + case SEN_OV7620: PDEBUG(D_PROBE, "Writing 7620 registers"); - if (write_i2c_regvals(sd, norm_7620, - sizeof norm_7620 / sizeof norm_7620[0])) + if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620))) return -1; - } else if (sd->sensor == SEN_OV7630) { + break; + case SEN_OV7630: PDEBUG(D_ERR, "7630 is not supported by this driver version"); return -1; - } else if (sd->sensor == SEN_OV7640) { + case SEN_OV7640: PDEBUG(D_PROBE, "Writing 7640 registers"); - if (write_i2c_regvals(sd, norm_7640, - sizeof norm_7640 / sizeof norm_7640[0])) + if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640))) return -1; - } else if (sd->sensor == SEN_OV7670) { + break; + case SEN_OV7670: PDEBUG(D_PROBE, "Writing 7670 registers"); - if (write_i2c_regvals(sd, norm_7670, - sizeof norm_7670 / sizeof norm_7670[0])) + if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670))) return -1; - } else { + break; + default: PDEBUG(D_PROBE, "Writing 7610 registers"); - if (write_i2c_regvals(sd, norm_7610, - sizeof norm_7610 / sizeof norm_7610[0])) + if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610))) return -1; + break; } /* Set sensor-specific vars */ - sd->maxwidth = 640; - sd->maxheight = 480; +/* sd->sif = 0; already done */ return 0; } @@ -1257,43 +1219,45 @@ static int ov6xx0_configure(struct sd *sd) /* Ugh. The first two bits are the version bits, but * the entire register value must be used. I guess OVT * underestimated how many variants they would make. */ - if (rc == 0x00) { + switch (rc) { + case 0x00: sd->sensor = SEN_OV6630; PDEBUG(D_ERR, "WARNING: Sensor is an OV66308. Your camera may have"); PDEBUG(D_ERR, "been misdetected in previous driver versions."); - } else if (rc == 0x01) { + break; + case 0x01: sd->sensor = SEN_OV6620; - PDEBUG(D_PROBE, "Sensor is an OV6620"); - } else if (rc == 0x02) { + break; + case 0x02: sd->sensor = SEN_OV6630; PDEBUG(D_PROBE, "Sensor is an OV66308AE"); - } else if (rc == 0x03) { + break; + case 0x03: sd->sensor = SEN_OV6630; PDEBUG(D_PROBE, "Sensor is an OV66308AF"); - } else if (rc == 0x90) { + break; + case 0x90: sd->sensor = SEN_OV6630; PDEBUG(D_ERR, "WARNING: Sensor is an OV66307. Your camera may have"); PDEBUG(D_ERR, "been misdetected in previous driver versions."); - } else { + break; + default: PDEBUG(D_ERR, "FATAL: Unknown sensor version: 0x%02x", rc); return -1; } /* Set sensor-specific vars */ - sd->maxwidth = 352; - sd->maxheight = 288; + sd->sif = 1; if (sd->sensor == SEN_OV6620) { PDEBUG(D_PROBE, "Writing 6x20 registers"); - if (write_i2c_regvals(sd, norm_6x20, - sizeof norm_6x20 / sizeof norm_6x20[0])) + if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20))) return -1; } else { PDEBUG(D_PROBE, "Writing 6x30 registers"); - if (write_i2c_regvals(sd, norm_6x30, - sizeof norm_6x30 / sizeof norm_6x30[0])) + if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30))) return -1; } return 0; @@ -1302,14 +1266,8 @@ static int ov6xx0_configure(struct sd *sd) /* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */ static void ov51x_led_control(struct sd *sd, int on) { - PDEBUG(D_STREAM, "LED (%s)", on ? "on" : "off"); - -/* if (sd->bridge == BRG_OV511PLUS) */ -/* reg_w(sd, R511_SYS_LED_CTL, on ? 1 : 0); */ -/* else if (sd->bridge == BRG_OV519) */ - reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1); /* 0 / 1 */ -/* else if (sd->bclass == BCL_OV518) */ -/* reg_w_mask(sd, R518_GPIO_OUT, on ? 0x02 : 0x00, 0x02); */ +/* PDEBUG(D_STREAM, "LED (%s)", on ? "on" : "off"); */ + reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1); /* 0 / 1 */ } /* this function is called at probe time */ @@ -1319,11 +1277,8 @@ static int sd_config(struct gspca_dev *gspca_dev, struct sd *sd = (struct sd *) gspca_dev; struct cam *cam; -/* (from ov519_configure) */ static const struct ov_regvals init_519[] = { { 0x5a, 0x6d }, /* EnableSystem */ -/* jfm trace usbsnoop3-1.txt */ -/* jfm 53 = fb */ { 0x53, 0x9b }, { 0x54, 0xff }, /* set bit2 to enable jpeg */ { 0x5d, 0x03 }, @@ -1340,9 +1295,6 @@ static int sd_config(struct gspca_dev *gspca_dev, if (write_regvals(sd, init_519, ARRAY_SIZE(init_519))) goto error; -/* jfm: not seen in windows trace */ - if (ov519_init_compression(sd)) - goto error; ov51x_led_control(sd, 0); /* turn LED off */ /* Test for 76xx */ @@ -1391,16 +1343,16 @@ static int sd_config(struct gspca_dev *gspca_dev, cam = &gspca_dev->cam; cam->epaddr = OV511_ENDPOINT_ADDRESS; - if (sd->maxwidth == 640) { + if (!sd->sif) { cam->cam_mode = vga_mode; - cam->nmodes = sizeof vga_mode / sizeof vga_mode[0]; + cam->nmodes = ARRAY_SIZE(vga_mode); } else { cam->cam_mode = sif_mode; - cam->nmodes = sizeof sif_mode / sizeof sif_mode[0]; + cam->nmodes = ARRAY_SIZE(sif_mode); } - sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value; - sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value; - sd->colors = sd_ctrls[SD_COLOR].qctrl.default_value; + sd->brightness = BRIGHTNESS_DEF; + sd->contrast = CONTRAST_DEF; + sd->colors = COLOR_DEF; sd->hflip = HFLIP_DEF; sd->vflip = VFLIP_DEF; return 0; @@ -1422,8 +1374,7 @@ static int sd_open(struct gspca_dev *gspca_dev) * * Do not put any sensor-specific code in here (including I2C I/O functions) */ -static int ov519_mode_init_regs(struct sd *sd, - int width, int height) +static int ov519_mode_init_regs(struct sd *sd) { static const struct ov_regvals mode_init_519_ov7670[] = { { 0x5d, 0x03 }, /* Turn off suspend mode */ @@ -1469,36 +1420,23 @@ static int ov519_mode_init_regs(struct sd *sd, /* windows reads 0x55 at this point, why? */ }; -/* int hi_res; */ - - PDEBUG(D_CONF, "mode init %dx%d", width, height); - -/* if (width >= 800 && height >= 600) - hi_res = 1; - else - hi_res = 0; */ - -/* if (ov51x_stop(sd) < 0) - return -EIO; */ - /******** Set the mode ********/ if (sd->sensor != SEN_OV7670) { if (write_regvals(sd, mode_init_519, ARRAY_SIZE(mode_init_519))) return -EIO; + if (sd->sensor == SEN_OV7640) { + /* Select 8-bit input mode */ + reg_w_mask(sd, OV519_CAM_DFR, 0x10, 0x10); + } } else { if (write_regvals(sd, mode_init_519_ov7670, ARRAY_SIZE(mode_init_519_ov7670))) return -EIO; } - if (sd->sensor == SEN_OV7640) { - /* Select 8-bit input mode */ - reg_w_mask(sd, OV519_CAM_DFR, 0x10, 0x10); - } - - reg_w(sd, OV519_CAM_H_SIZE, width >> 4); - reg_w(sd, OV519_CAM_V_SIZE, height >> 3); + reg_w(sd, OV519_CAM_H_SIZE, sd->gspca_dev.width >> 4); + reg_w(sd, OV519_CAM_V_SIZE, sd->gspca_dev.height >> 3); reg_w(sd, OV519_CAM_X_OFFSETL, 0x00); reg_w(sd, OV519_CAM_X_OFFSETH, 0x00); reg_w(sd, OV519_CAM_Y_OFFSETL, 0x00); @@ -1513,9 +1451,10 @@ static int ov519_mode_init_regs(struct sd *sd, /* FIXME: These are only valid at the max resolution. */ sd->clockdiv = 0; - if (sd->sensor == SEN_OV7640) { + switch (sd->sensor) { + case SEN_OV7640: switch (sd->frame_rate) { -/*jfm: default was 30 fps */ +/*fixme: default was 30 fps */ case 30: reg_w(sd, 0xa4, 0x0c); reg_w(sd, 0x23, 0xff); @@ -1545,7 +1484,8 @@ static int ov519_mode_init_regs(struct sd *sd, sd->clockdiv = 1; break; } - } else if (sd->sensor == SEN_OV8610) { + break; + case SEN_OV8610: switch (sd->frame_rate) { default: /* 15 fps */ /* case 15: */ @@ -1561,41 +1501,37 @@ static int ov519_mode_init_regs(struct sd *sd, reg_w(sd, 0x23, 0x1b); break; } - sd->clockdiv = 0; - } else if (sd->sensor == SEN_OV7670) { /* guesses, based on 7640 */ + break; + case SEN_OV7670: /* guesses, based on 7640 */ PDEBUG(D_STREAM, "Setting framerate to %d fps", (sd->frame_rate == 0) ? 15 : sd->frame_rate); + reg_w(sd, 0xa4, 0x10); switch (sd->frame_rate) { case 30: - reg_w(sd, 0xa4, 0x10); reg_w(sd, 0x23, 0xff); break; case 20: - reg_w(sd, 0xa4, 0x10); reg_w(sd, 0x23, 0x1b); break; - default: /* 15 fps */ -/* case 15: */ - reg_w(sd, 0xa4, 0x10); + default: +/* case 15: */ reg_w(sd, 0x23, 0xff); sd->clockdiv = 1; break; } + break; } -/* if (ov51x_restart(sd) < 0) - return -EIO; */ - - /* Reset it just for good measure */ -/* if (ov51x_reset(sd, OV511_RESET_NOREGS) < 0) - return -EIO; */ return 0; } -static int mode_init_ov_sensor_regs(struct sd *sd, - struct ovsensor_window *win) +static int mode_init_ov_sensor_regs(struct sd *sd) { - int qvga = win->quarter; + struct gspca_dev *gspca_dev; + int qvga; + + gspca_dev = &sd->gspca_dev; + qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; /******** Mode (VGA/QVGA) and sensor specific regs ********/ switch (sd->sensor) { @@ -1639,8 +1575,6 @@ static int mode_init_ov_sensor_regs(struct sd *sd, OV7670_COM7_FMT_MASK); break; case SEN_OV6620: - i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); - break; case SEN_OV6630: i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); break; @@ -1649,24 +1583,21 @@ static int mode_init_ov_sensor_regs(struct sd *sd, } /******** Palette-specific regs ********/ -/* Need to do work here for the OV7670 */ - - if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) { - /* not valid on the OV6620/OV7620/6630? */ - i2c_w_mask(sd, 0x0e, 0x00, 0x40); - } + if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) { + /* not valid on the OV6620/OV7620/6630? */ + i2c_w_mask(sd, 0x0e, 0x00, 0x40); + } - /* The OV518 needs special treatment. Although both the OV518 - * and the OV6630 support a 16-bit video bus, only the 8 bit Y - * bus is actually used. The UV bus is tied to ground. - * Therefore, the OV6630 needs to be in 8-bit multiplexed - * output mode */ + /* The OV518 needs special treatment. Although both the OV518 + * and the OV6630 support a 16-bit video bus, only the 8 bit Y + * bus is actually used. The UV bus is tied to ground. + * Therefore, the OV6630 needs to be in 8-bit multiplexed + * output mode */ - /* OV7640 is 8-bit only */ + /* OV7640 is 8-bit only */ - if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640) - i2c_w_mask(sd, 0x13, 0x00, 0x20); -/* } */ + if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV7640) + i2c_w_mask(sd, 0x13, 0x00, 0x20); /******** Clock programming ********/ /* The OV6620 needs special handling. This prevents the @@ -1675,14 +1606,14 @@ static int mode_init_ov_sensor_regs(struct sd *sd, /* Clock down */ i2c_w(sd, 0x2a, 0x04); - i2c_w(sd, 0x11, win->clockdiv); + i2c_w(sd, 0x11, sd->clockdiv); i2c_w(sd, 0x2a, 0x84); /* This next setting is critical. It seems to improve * the gain or the contrast. The "reserved" bits seem * to have some effect in this case. */ i2c_w(sd, 0x2d, 0x85); - } else if (win->clockdiv >= 0) { - i2c_w(sd, 0x11, win->clockdiv); + } else if (sd->clockdiv >= 0) { + i2c_w(sd, 0x11, sd->clockdiv); } /******** Special Features ********/ @@ -1702,7 +1633,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd, /* is fully tested. */ /* 7620/6620/6630? don't have register 0x35, so play it safe */ if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) { - if (win->width == 640 /*&& win->height == 480*/) + if (!qvga) i2c_w(sd, 0x35, 0x9e); else i2c_w(sd, 0x35, 0x1e); @@ -1710,33 +1641,31 @@ static int mode_init_ov_sensor_regs(struct sd *sd, return 0; } -static void sethflip(struct sd *sd) -{ - if (sd->gspca_dev.streaming) - ov51x_stop(sd); - i2c_w_mask(sd, OV7670_REG_MVFP, - OV7670_MVFP_MIRROR * sd->hflip, OV7670_MVFP_MIRROR); - if (sd->gspca_dev.streaming) - ov51x_restart(sd); -} - -static void setvflip(struct sd *sd) +static void sethvflip(struct sd *sd) { + if (sd->sensor != SEN_OV7670) + return; if (sd->gspca_dev.streaming) ov51x_stop(sd); i2c_w_mask(sd, OV7670_REG_MVFP, - OV7670_MVFP_VFLIP * sd->vflip, OV7670_MVFP_VFLIP); + OV7670_MVFP_MIRROR * sd->hflip + | OV7670_MVFP_VFLIP * sd->vflip, + OV7670_MVFP_MIRROR | OV7670_MVFP_VFLIP); if (sd->gspca_dev.streaming) ov51x_restart(sd); } -static int set_ov_sensor_window(struct sd *sd, - struct ovsensor_window *win) +static int set_ov_sensor_window(struct sd *sd) { + struct gspca_dev *gspca_dev; + int qvga; int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale; int ret, hstart, hstop, vstop, vstart; __u8 v; + gspca_dev = &sd->gspca_dev; + qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv; + /* The different sensor ICs handle setting up of window differently. * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!! */ switch (sd->sensor) { @@ -1781,7 +1710,7 @@ static int set_ov_sensor_window(struct sd *sd, switch (sd->sensor) { case SEN_OV6620: case SEN_OV6630: - if (win->quarter) { /* QCIF */ + if (qvga) { /* QCIF */ hwscale = 0; vwscale = 0; } else { /* CIF */ @@ -1791,7 +1720,7 @@ static int set_ov_sensor_window(struct sd *sd, } break; case SEN_OV8610: - if (win->quarter) { /* QSVGA */ + if (qvga) { /* QSVGA */ hwscale = 1; vwscale = 1; } else { /* SVGA */ @@ -1800,7 +1729,7 @@ static int set_ov_sensor_window(struct sd *sd, } break; default: /* SEN_OV7xx0 */ - if (win->quarter) { /* QVGA */ + if (qvga) { /* QVGA */ hwscale = 1; vwscale = 0; } else { /* VGA */ @@ -1809,7 +1738,7 @@ static int set_ov_sensor_window(struct sd *sd, } } - ret = mode_init_ov_sensor_regs(sd, win); + ret = mode_init_ov_sensor_regs(sd); if (ret < 0) return ret; @@ -1830,7 +1759,7 @@ static int set_ov_sensor_window(struct sd *sd, /* I can hard code this for OV7670s */ /* Yes, these numbers do look odd, but they're tested and work! */ if (sd->sensor == SEN_OV7670) { - if (win->quarter) { /* QVGA from ov7670.c by + if (qvga) { /* QVGA from ov7670.c by * Jonathan Corbet */ hstart = 164; hstop = 20; @@ -1844,76 +1773,45 @@ static int set_ov_sensor_window(struct sd *sd, } /* OV7670 hardware window registers are split across * multiple locations */ - i2c_w(sd, OV7670_REG_HSTART, (hstart >> 3) & 0xff); - i2c_w(sd, OV7670_REG_HSTOP, (hstop >> 3) & 0xff); + i2c_w(sd, OV7670_REG_HSTART, hstart >> 3); + i2c_w(sd, OV7670_REG_HSTOP, hstop >> 3); v = i2c_r(sd, OV7670_REG_HREF); v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x07); msleep(10); /* need to sleep between read and write to * same reg! */ i2c_w(sd, OV7670_REG_HREF, v); - i2c_w(sd, OV7670_REG_VSTART, (vstart >> 2) & 0xff); - i2c_w(sd, OV7670_REG_VSTOP, (vstop >> 2) & 0xff); + i2c_w(sd, OV7670_REG_VSTART, vstart >> 2); + i2c_w(sd, OV7670_REG_VSTOP, vstop >> 2); v = i2c_r(sd, OV7670_REG_VREF); v = (v & 0xc0) | ((vstop & 0x3) << 2) | (vstart & 0x03); msleep(10); /* need to sleep between read and write to * same reg! */ i2c_w(sd, OV7670_REG_VREF, v); - sethflip(sd); - setvflip(sd); + sethvflip(sd); } else { - i2c_w(sd, 0x17, hwsbase + (win->x >> hwscale)); - i2c_w(sd, 0x18, hwebase + ((win->x + win->width) >> hwscale)); - i2c_w(sd, 0x19, vwsbase + (win->y >> vwscale)); - i2c_w(sd, 0x1a, vwebase + ((win->y + win->height) >> vwscale)); + i2c_w(sd, 0x17, hwsbase); + i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale)); + i2c_w(sd, 0x19, vwsbase); + i2c_w(sd, 0x1a, vwebase + (sd->gspca_dev.height >> vwscale)); } return 0; } -static int ov_sensor_mode_setup(struct sd *sd, - int width, int height) -{ - struct ovsensor_window win; - -/* win.format = mode; */ - - /* Unless subcapture is enabled, - * center the image window and downsample - * if possible to increase the field of view */ - /* NOTE: OV518(+) and OV519 does downsampling on its own */ - win.width = width; - win.height = height; - if (width == sd->maxwidth) - win.quarter = 0; - else - win.quarter = 1; - - /* Center it */ - win.x = (win.width - width) / 2; - win.y = (win.height - height) / 2; - - /* Clock is determined by OV519 frame rate code */ - win.clockdiv = sd->clockdiv; - - PDEBUG(D_CONF, "Setting clock divider to %d", win.clockdiv); - return set_ov_sensor_window(sd, &win); -} - /* -- start the camera -- */ static void sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int ret; - - ret = ov519_mode_init_regs(sd, gspca_dev->width, gspca_dev->height); + ret = ov519_mode_init_regs(sd); if (ret < 0) goto out; - ret = ov_sensor_mode_setup(sd, gspca_dev->width, gspca_dev->height); + ret = set_ov_sensor_window(sd); if (ret < 0) goto out; - ret = ov51x_restart((struct sd *) gspca_dev); + ret = ov51x_restart(sd); if (ret < 0) goto out; PDEBUG(D_STREAM, "camera started alt: 0x%02x", gspca_dev->alt); @@ -1987,12 +1885,10 @@ static void setbrightness(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int val; -/* int was_streaming; */ val = sd->brightness; PDEBUG(D_CONF, "brightness:%d", val); -/* was_streaming = gspca_dev->streaming; - * if (was_streaming) +/* if (gspca_dev->streaming) * ov51x_stop(sd); */ switch (sd->sensor) { case SEN_OV8610: @@ -2010,12 +1906,12 @@ static void setbrightness(struct gspca_dev *gspca_dev) i2c_w(sd, OV7610_REG_BRT, val); break; case SEN_OV7670: -/*jfm - from windblows +/*win trace * i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_AEC); */ i2c_w(sd, OV7670_REG_BRIGHT, ov7670_abs_to_sm(val)); break; } -/* if (was_streaming) +/* if (gspca_dev->streaming) * ov51x_restart(sd); */ } @@ -2023,12 +1919,10 @@ static void setcontrast(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int val; -/* int was_streaming; */ val = sd->contrast; PDEBUG(D_CONF, "contrast:%d", val); -/* was_streaming = gspca_dev->streaming; - if (was_streaming) +/* if (gspca_dev->streaming) ov51x_stop(sd); */ switch (sd->sensor) { case SEN_OV7610: @@ -2065,7 +1959,7 @@ static void setcontrast(struct gspca_dev *gspca_dev) i2c_w(sd, OV7670_REG_CONTRAS, val >> 1); break; } -/* if (was_streaming) +/* if (gspca_dev->streaming) ov51x_restart(sd); */ } @@ -2073,12 +1967,10 @@ static void setcolors(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; int val; -/* int was_streaming; */ val = sd->colors; PDEBUG(D_CONF, "saturation:%d", val); -/* was_streaming = gspca_dev->streaming; - if (was_streaming) +/* if (gspca_dev->streaming) ov51x_stop(sd); */ switch (sd->sensor) { case SEN_OV8610: @@ -2104,7 +1996,7 @@ static void setcolors(struct gspca_dev *gspca_dev) /* set REG_COM13 values for UV sat auto mode */ break; } -/* if (was_streaming) +/* if (gspca_dev->streaming) ov51x_restart(sd); */ } @@ -2164,7 +2056,7 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->hflip = val; - sethflip(sd); + sethvflip(sd); return 0; } @@ -2181,7 +2073,7 @@ static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->vflip = val; - setvflip(sd); + sethvflip(sd); return 0; } -- GitLab From cebf3b67f7f80fd69bd1ff5787fee69ab8fd3c2a Mon Sep 17 00:00:00 2001 From: Jean-Francois Moine Date: Sun, 3 Aug 2008 07:52:53 -0300 Subject: [PATCH 0859/1024] V4L/DVB (8604): gspca: Fix of "scheduling while atomic" crash. The crash is due to USB exchanges done at interrupt level. These exchanges, tied to autogain, are now done by the application. Also, there is a fix about autogain start. Concerned subdrivers: etoms, pac7311, sonixj and spca561. Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/etoms.c | 133 +++++++++++++++------------- drivers/media/video/gspca/pac7311.c | 54 ++++++----- drivers/media/video/gspca/sonixj.c | 57 ++++++++---- drivers/media/video/gspca/spca561.c | 42 +++++---- 4 files changed, 171 insertions(+), 115 deletions(-) diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c index 6a4e68286ef..1dbe92d01e6 100644 --- a/drivers/media/video/gspca/etoms.c +++ b/drivers/media/video/gspca/etoms.c @@ -461,6 +461,52 @@ static void Et_init2(struct gspca_dev *gspca_dev) reg_w_val(gspca_dev, 0x80, 0x20); /* 0x20; */ } +static void setbrightness(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + __u8 brightness = sd->brightness; + + for (i = 0; i < 4; i++) + reg_w_val(gspca_dev, ET_O_RED + i, brightness); +} + +static void getbrightness(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + int brightness = 0; + + for (i = 0; i < 4; i++) { + reg_r(gspca_dev, ET_O_RED + i, 1); + brightness += gspca_dev->usb_buf[0]; + } + sd->brightness = brightness >> 3; +} + +static void setcontrast(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + __u8 RGBG[] = { 0x80, 0x80, 0x80, 0x80, 0x00, 0x00 }; + __u8 contrast = sd->contrast; + + memset(RGBG, contrast, sizeof(RGBG) - 2); + reg_w(gspca_dev, ET_G_RED, RGBG, 6); +} + +static void getcontrast(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + int i; + int contrast = 0; + + for (i = 0; i < 4; i++) { + reg_r(gspca_dev, ET_G_RED + i, 1); + contrast += gspca_dev->usb_buf[0]; + } + sd->contrast = contrast >> 2; +} + static void setcolors(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -492,6 +538,16 @@ static void getcolors(struct gspca_dev *gspca_dev) } } +static void setautogain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->autogain) + sd->ag_cnt = AG_CNT_START; + else + sd->ag_cnt = -1; +} + static void Et_init1(struct gspca_dev *gspca_dev) { __u8 value; @@ -614,6 +670,7 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->contrast = CONTRAST_DEF; sd->colors = COLOR_DEF; sd->autogain = AUTOGAIN_DEF; + sd->ag_cnt = -1; return 0; } @@ -641,6 +698,8 @@ static void sd_start(struct gspca_dev *gspca_dev) else Et_init2(gspca_dev); + setautogain(gspca_dev); + reg_w_val(gspca_dev, ET_RESET_ALL, 0x08); et_video(gspca_dev, 1); /* video on */ } @@ -658,52 +717,6 @@ static void sd_close(struct gspca_dev *gspca_dev) { } -static void setbrightness(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - int i; - __u8 brightness = sd->brightness; - - for (i = 0; i < 4; i++) - reg_w_val(gspca_dev, ET_O_RED + i, brightness); -} - -static void getbrightness(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - int i; - int brightness = 0; - - for (i = 0; i < 4; i++) { - reg_r(gspca_dev, ET_O_RED + i, 1); - brightness += gspca_dev->usb_buf[0]; - } - sd->brightness = brightness >> 3; -} - -static void setcontrast(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - __u8 RGBG[] = { 0x80, 0x80, 0x80, 0x80, 0x00, 0x00 }; - __u8 contrast = sd->contrast; - - memset(RGBG, contrast, sizeof(RGBG) - 2); - reg_w(gspca_dev, ET_G_RED, RGBG, 6); -} - -static void getcontrast(struct gspca_dev *gspca_dev) -{ - struct sd *sd = (struct sd *) gspca_dev; - int i; - int contrast = 0; - - for (i = 0; i < 4; i++) { - reg_r(gspca_dev, ET_G_RED + i, 1); - contrast += gspca_dev->usb_buf[0]; - } - sd->contrast = contrast >> 2; -} - static __u8 Et_getgainG(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -733,15 +746,22 @@ static void Et_setgainG(struct gspca_dev *gspca_dev, __u8 gain) #define LIMIT(color) \ (unsigned char)((color > 0xff)?0xff:((color < 0)?0:color)) -static void setautogain(struct gspca_dev *gspca_dev) +static void do_autogain(struct gspca_dev *gspca_dev) { - __u8 luma = 0; + struct sd *sd = (struct sd *) gspca_dev; + __u8 luma; __u8 luma_mean = 128; __u8 luma_delta = 20; __u8 spring = 4; - int Gbright = 0; + int Gbright; __u8 r, g, b; + if (sd->ag_cnt < 0) + return; + if (--sd->ag_cnt >= 0) + return; + sd->ag_cnt = AG_CNT_START; + Gbright = Et_getgainG(gspca_dev); reg_r(gspca_dev, ET_LUMA_CENTER, 4); g = (gspca_dev->usb_buf[0] + gspca_dev->usb_buf[3]) >> 1; @@ -768,7 +788,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, __u8 *data, /* isoc packet */ int len) /* iso packet length */ { - struct sd *sd; int seqframe; seqframe = data[0] & 0x3f; @@ -783,13 +802,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len); - sd = (struct sd *) gspca_dev; - if (sd->ag_cnt >= 0) { - if (--sd->ag_cnt < 0) { - sd->ag_cnt = AG_CNT_START; - setautogain(gspca_dev); - } - } return; } if (len) { @@ -862,10 +874,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->autogain = val; - if (val) - sd->ag_cnt = AG_CNT_START; - else - sd->ag_cnt = -1; + if (gspca_dev->streaming) + setautogain(gspca_dev); return 0; } @@ -889,6 +899,7 @@ static struct sd_desc sd_desc = { .stop0 = sd_stop0, .close = sd_close, .pkt_scan = sd_pkt_scan, + .dq_callback = do_autogain, }; /* -- module initialisation -- */ diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index ea3d7021f40..815bea6edc4 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -31,7 +31,9 @@ MODULE_LICENSE("GPL"); struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ - int avg_lum; + int lum_sum; + atomic_t avg_lum; + atomic_t do_gain; unsigned char brightness; unsigned char contrast; @@ -271,6 +273,7 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->contrast = CONTRAST_DEF; sd->colors = COLOR_DEF; sd->autogain = AUTOGAIN_DEF; + sd->ag_cnt = -1; return 0; } @@ -311,6 +314,18 @@ static void setcolors(struct gspca_dev *gspca_dev) PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors); } +static void setautogain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->autogain) { + sd->lum_sum = 0; + sd->ag_cnt = AG_CNT_START; + } else { + sd->ag_cnt = -1; + } +} + /* this function is called at open time */ static int sd_open(struct gspca_dev *gspca_dev) { @@ -320,8 +335,6 @@ static int sd_open(struct gspca_dev *gspca_dev) static void sd_start(struct gspca_dev *gspca_dev) { - struct sd *sd = (struct sd *) gspca_dev; - reg_w(gspca_dev, 0xff, 0x01); reg_w_buf(gspca_dev, 0x0002, "\x48\x0a\x40\x08\x00\x00\x08\x00", 8); reg_w_buf(gspca_dev, 0x000a, "\x06\xff\x11\xff\x5a\x30\x90\x4c", 8); @@ -394,6 +407,7 @@ static void sd_start(struct gspca_dev *gspca_dev) setcontrast(gspca_dev); setbrightness(gspca_dev); setcolors(gspca_dev); + setautogain(gspca_dev); /* set correct resolution */ switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) { @@ -431,13 +445,6 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x78, 0x04); reg_w(gspca_dev, 0x78, 0x05); - - if (sd->autogain) { - sd->ag_cnt = AG_CNT_START; - sd->avg_lum = 0; - } else { - sd->ag_cnt = -1; - } } static void sd_stopN(struct gspca_dev *gspca_dev) @@ -473,13 +480,20 @@ static void sd_close(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */ } -static void setautogain(struct gspca_dev *gspca_dev, int luma) +static void do_autogain(struct gspca_dev *gspca_dev) { + struct sd *sd = (struct sd *) gspca_dev; + int luma; int luma_mean = 128; int luma_delta = 20; __u8 spring = 5; int Gbright; + if (!atomic_read(&sd->do_gain)) + return; + atomic_set(&sd->do_gain, 0); + + luma = atomic_read(&sd->avg_lum); Gbright = reg_r(gspca_dev, 0x02); PDEBUG(D_FRAM, "luma mean %d", luma); if (luma < luma_mean - luma_delta || @@ -523,12 +537,13 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, /* start of frame */ if (sd->ag_cnt >= 0 && p > 28) { - sd->avg_lum += data[p - 23]; + sd->lum_sum += data[p - 23]; if (--sd->ag_cnt < 0) { sd->ag_cnt = AG_CNT_START; - setautogain(gspca_dev, - sd->avg_lum / AG_CNT_START); - sd->avg_lum = 0; + atomic_set(&sd->avg_lum, + sd->lum_sum / AG_CNT_START); + sd->lum_sum = 0; + atomic_set(&sd->do_gain, 1); } } @@ -677,12 +692,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->autogain = val; - if (val) { - sd->ag_cnt = AG_CNT_START; - sd->avg_lum = 0; - } else { - sd->ag_cnt = -1; - } + if (gspca_dev->streaming) + setautogain(gspca_dev); return 0; } @@ -706,6 +717,7 @@ static struct sd_desc sd_desc = { .stop0 = sd_stop0, .close = sd_close, .pkt_scan = sd_pkt_scan, + .dq_callback = do_autogain, }; /* -- module initialisation -- */ diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c index b60ff600a75..245a30ec5fb 100644 --- a/drivers/media/video/gspca/sonixj.c +++ b/drivers/media/video/gspca/sonixj.c @@ -32,7 +32,7 @@ MODULE_LICENSE("GPL"); struct sd { struct gspca_dev gspca_dev; /* !! must be the first item */ - int avg_lum; + atomic_t avg_lum; unsigned int exposure; unsigned short brightness; @@ -781,6 +781,8 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->contrast = CONTRAST_DEF; sd->colors = COLOR_DEF; sd->autogain = AUTOGAIN_DEF; + sd->ag_cnt = -1; + return 0; } @@ -946,6 +948,22 @@ static void setcolors(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x05, data); } +static void setautogain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + switch (sd->sensor) { + case SENSOR_HV7131R: + case SENSOR_MO4000: + case SENSOR_MI0360: + if (sd->autogain) + sd->ag_cnt = AG_CNT_START; + else + sd->ag_cnt = -1; + break; + } +} + /* -- start the camera -- */ static void sd_start(struct gspca_dev *gspca_dev) { @@ -1078,6 +1096,7 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w1(gspca_dev, 0x01, reg1); setbrightness(gspca_dev); setcontrast(gspca_dev); + setautogain(gspca_dev); } static void sd_stopN(struct gspca_dev *gspca_dev) @@ -1124,16 +1143,23 @@ static void sd_close(struct gspca_dev *gspca_dev) { } -static void setautogain(struct gspca_dev *gspca_dev) +static void do_autogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - /* Thanks S., without your advice, autobright should not work :) */ int delta; - int expotimes = 0; + int expotimes; __u8 luma_mean = 130; __u8 luma_delta = 20; - delta = sd->avg_lum; + /* Thanks S., without your advice, autobright should not work :) */ + if (sd->ag_cnt < 0) + return; + if (--sd->ag_cnt >= 0) + return; + sd->ag_cnt = AG_CNT_START; + + delta = atomic_read(&sd->avg_lum); + PDEBUG(D_FRAM, "mean lum %d", delta); if (delta < luma_mean - luma_delta || delta > luma_mean + luma_delta) { switch (sd->sensor) { @@ -1145,8 +1171,9 @@ static void setautogain(struct gspca_dev *gspca_dev) sd->exposure = setexposure(gspca_dev, (unsigned int) (expotimes << 8)); break; - case SENSOR_MO4000: - case SENSOR_MI0360: + default: +/* case SENSOR_MO4000: */ +/* case SENSOR_MI0360: */ expotimes = sd->exposure; expotimes += (luma_mean - delta) >> 6; if (expotimes < 0) @@ -1159,6 +1186,8 @@ static void setautogain(struct gspca_dev *gspca_dev) } } +/* scan the URB packets */ +/* This function is run at interrupt level. */ static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame, /* target */ __u8 *data, /* isoc packet */ @@ -1175,9 +1204,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, frame, data, sof + 2); if (sd->ag_cnt < 0) return; - if (--sd->ag_cnt >= 0) - return; - sd->ag_cnt = AG_CNT_START; /* w1 w2 w3 */ /* w4 w5 w6 */ /* w7 w8 */ @@ -1192,9 +1218,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, /* w5 */ avg_lum += ((data[sof + 31] << 8) | data[sof + 32]) >> 4; avg_lum >>= 4; - sd->avg_lum = avg_lum; - PDEBUG(D_PACK, "mean lum %d", avg_lum); - setautogain(gspca_dev); + atomic_set(&sd->avg_lum, avg_lum); return; } if (gspca_dev->last_packet_type == LAST_PACKET) { @@ -1321,10 +1345,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->autogain = val; - if (val) - sd->ag_cnt = AG_CNT_START; - else - sd->ag_cnt = -1; + if (gspca_dev->streaming) + setautogain(gspca_dev); return 0; } @@ -1348,6 +1370,7 @@ static const struct sd_desc sd_desc = { .stop0 = sd_stop0, .close = sd_close, .pkt_scan = sd_pkt_scan, + .dq_callback = do_autogain, }; /* -- module initialisation -- */ diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index a26174508cb..1073ac3d2ec 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -644,6 +644,18 @@ static void setcontrast(struct gspca_dev *gspca_dev) } } +static void setautogain(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + if (sd->chip_revision == Rev072A) { + if (sd->autogain) + sd->ag_cnt = AG_CNT_START; + else + sd->ag_cnt = -1; + } +} + static void sd_start(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; @@ -671,6 +683,7 @@ static void sd_start(struct gspca_dev *gspca_dev) reg_w_val(dev, 0x8500, mode); /* mode */ reg_w_val(dev, 0x8700, Clck); /* 0x27 clock */ reg_w_val(dev, 0x8112, 0x10 | 0x20); + setautogain(gspca_dev); break; default: /* case Rev012A: */ @@ -720,18 +733,24 @@ static void sd_close(struct gspca_dev *gspca_dev) reg_w_val(gspca_dev->dev, 0x8114, 0); } -static void setautogain(struct gspca_dev *gspca_dev) +static void do_autogain(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - int expotimes = 0; - int pixelclk = 0; - int gainG = 0; + int expotimes; + int pixelclk; + int gainG; __u8 R, Gr, Gb, B; int y; __u8 luma_mean = 110; __u8 luma_delta = 20; __u8 spring = 4; + if (sd->ag_cnt < 0) + return; + if (--sd->ag_cnt >= 0) + return; + sd->ag_cnt = AG_CNT_START; + switch (sd->chip_revision) { case Rev072A: reg_r(gspca_dev, 0x8621, 1); @@ -795,18 +814,10 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, __u8 *data, /* isoc packet */ int len) /* iso packet length */ { - struct sd *sd = (struct sd *) gspca_dev; - switch (data[0]) { case 0: /* start of frame */ frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); - if (sd->ag_cnt >= 0) { - if (--sd->ag_cnt < 0) { - sd->ag_cnt = AG_CNT_START; - setautogain(gspca_dev); - } - } data += SPCA561_OFFSET_DATA; len -= SPCA561_OFFSET_DATA; if (data[1] & 0x10) { @@ -944,10 +955,8 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val) struct sd *sd = (struct sd *) gspca_dev; sd->autogain = val; - if (val) - sd->ag_cnt = AG_CNT_START; - else - sd->ag_cnt = -1; + if (gspca_dev->streaming) + setautogain(gspca_dev); return 0; } @@ -971,6 +980,7 @@ static const struct sd_desc sd_desc = { .stop0 = sd_stop0, .close = sd_close, .pkt_scan = sd_pkt_scan, + .dq_callback = do_autogain, }; /* -- module initialisation -- */ -- GitLab From fcf5cb2406827fc9d3f3fe260ac883ef72b8bac0 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Sun, 3 Aug 2008 07:58:54 -0300 Subject: [PATCH 0860/1024] V4L/DVB (8605): gspca: Fix of gspca_zc3xx oops - 2.6.27-rc1 Bad mini/max check in setting control values (the gamma in zc3xx could be set to null). Signed-off-by: Rabin Vincent Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/gspca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 7f773e37897..15d302b28b7 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -904,7 +904,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv, if (ctrl->id != ctrls->qctrl.id) continue; if (ctrl->value < ctrls->qctrl.minimum - && ctrl->value > ctrls->qctrl.maximum) + || ctrl->value > ctrls->qctrl.maximum) return -ERANGE; PDEBUG(D_CONF, "set ctrl [%08x] = %d", ctrl->id, ctrl->value); if (mutex_lock_interruptible(&gspca_dev->usb_lock)) -- GitLab From d483b730681fa527f343dcc859185e06d60ae121 Mon Sep 17 00:00:00 2001 From: Robert Lowery Date: Wed, 30 Jul 2008 19:43:11 -0300 Subject: [PATCH 0861/1024] V4L/DVB (8607): cxusb: fix OOPS and broken tuning regression on FusionHDTV Dual Digital 4 quoting Robert Lowery: I think I've found the cause of the oops. [...] BTW it appears I have fixed my tuning problems with the updated patch below. This reverts a change Mauro made a while back. All is good now :) [...] The good news is that I've got a better patch that definitely works this time and even better, makes use of the standard firmware (rather than the Australian specific one). ...based on an earlier patch by Hans-Frieder Vogt: http://www.linuxtv.org/pipermail/linux-dvb/2008-May/026280.html Signed-off-by: Robert Lowery Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/cxusb.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index 578afce6884..aaa0b6f0b52 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -565,7 +565,8 @@ static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap) static int dvico_bluebird_xc2028_callback(void *ptr, int command, int arg) { - struct dvb_usb_device *d = ptr; + struct dvb_usb_adapter *adap = ptr; + struct dvb_usb_device *d = adap->dev; switch (command) { case XC2028_TUNER_RESET: @@ -593,9 +594,9 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap) .callback = dvico_bluebird_xc2028_callback, }; static struct xc2028_ctrl ctl = { - .fname = "xc3028-dvico-au-01.fw", + .fname = "xc3028-v27.fw", .max_len = 64, - .scode_table = XC3028_FE_ZARLINK456, + .demod = XC3028_FE_ZARLINK456, }; fe = dvb_attach(xc2028_attach, adap->fe, &cfg); -- GitLab From 01c1e4ca8ec39d21be0cd9d1b300d479de97298a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 1 Aug 2008 19:48:51 -0300 Subject: [PATCH 0862/1024] V4L/DVB (8609): media: Clean up platform_driver_unregister() bogosity. So, platform_driver_unregister() doesn't actually have a return value, nor do any of the void __exit routines. It's reassuring to know that people copy and paste blindly. This completely blew up my compiler. Signed-off-by: Paul Mundt Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pxa_camera.c | 2 +- drivers/media/video/sh_mobile_ceu_camera.c | 2 +- drivers/media/video/soc_camera_platform.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index b15f82c4976..28d8fd0679b 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1198,7 +1198,7 @@ static int __devinit pxa_camera_init(void) static void __exit pxa_camera_exit(void) { - return platform_driver_unregister(&pxa_camera_driver); + platform_driver_unregister(&pxa_camera_driver); } module_init(pxa_camera_init); diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index f7ca3cb9340..318754e7313 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -647,7 +647,7 @@ static int __init sh_mobile_ceu_init(void) static void __exit sh_mobile_ceu_exit(void) { - return platform_driver_unregister(&sh_mobile_ceu_driver); + platform_driver_unregister(&sh_mobile_ceu_driver); } module_init(sh_mobile_ceu_init); diff --git a/drivers/media/video/soc_camera_platform.c b/drivers/media/video/soc_camera_platform.c index eefb0327ebb..1adc257ebdb 100644 --- a/drivers/media/video/soc_camera_platform.c +++ b/drivers/media/video/soc_camera_platform.c @@ -187,7 +187,7 @@ static int __init soc_camera_platform_module_init(void) static void __exit soc_camera_platform_module_exit(void) { - return platform_driver_unregister(&soc_camera_platform_driver); + platform_driver_unregister(&soc_camera_platform_driver); } module_init(soc_camera_platform_module_init); -- GitLab From 2e521061db61a35dd64ea85a1642f9a9dfde2872 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Fri, 1 Aug 2008 20:14:50 -0300 Subject: [PATCH 0863/1024] V4L/DVB (8610): Add suspend/resume capabilities to soc_camera. Add suspend/resume hooks to call soc operation specific suspend and resume functions. This ensures the camera chip has been previously resumed, as well as the camera bus. These hooks in camera chip drivers should save/restore chip context between suspend and resume time. Signed-off-by: Robert Jarzmik Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/soc_camera.c | 26 ++++++++++++++++++++++++++ include/media/soc_camera.h | 5 +++++ 2 files changed, 31 insertions(+) diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index b6be5ee678b..66ebe5956a8 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -732,10 +732,36 @@ static int soc_camera_remove(struct device *dev) return 0; } +static int soc_camera_suspend(struct device *dev, pm_message_t state) +{ + struct soc_camera_device *icd = to_soc_camera_dev(dev); + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + int ret = 0; + + if (ici->ops->suspend) + ret = ici->ops->suspend(icd, state); + + return ret; +} + +static int soc_camera_resume(struct device *dev) +{ + struct soc_camera_device *icd = to_soc_camera_dev(dev); + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); + int ret = 0; + + if (ici->ops->resume) + ret = ici->ops->resume(icd); + + return ret; +} + static struct bus_type soc_camera_bus_type = { .name = "soc-camera", .probe = soc_camera_probe, .remove = soc_camera_remove, + .suspend = soc_camera_suspend, + .resume = soc_camera_resume, }; static struct device_driver ic_drv = { diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index 1de98f150e9..d548de32672 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -14,6 +14,7 @@ #include #include +#include struct soc_camera_device { struct list_head list; @@ -63,6 +64,8 @@ struct soc_camera_host_ops { struct module *owner; int (*add)(struct soc_camera_device *); void (*remove)(struct soc_camera_device *); + int (*suspend)(struct soc_camera_device *, pm_message_t state); + int (*resume)(struct soc_camera_device *); int (*set_fmt_cap)(struct soc_camera_device *, __u32, struct v4l2_rect *); int (*try_fmt_cap)(struct soc_camera_device *, struct v4l2_format *); @@ -111,6 +114,8 @@ struct soc_camera_ops { struct module *owner; int (*probe)(struct soc_camera_device *); void (*remove)(struct soc_camera_device *); + int (*suspend)(struct soc_camera_device *, pm_message_t state); + int (*resume)(struct soc_camera_device *); int (*init)(struct soc_camera_device *); int (*release)(struct soc_camera_device *); int (*start_capture)(struct soc_camera_device *); -- GitLab From 3f6ac497b036533d1a63ba04fdbe710c55e14cda Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sat, 2 Aug 2008 07:10:04 -0300 Subject: [PATCH 0864/1024] V4L/DVB (8611): Add suspend/resume to pxa_camera driver PXA suspend switches off DMA core, which loses all context of previously assigned descriptors. As pxa_camera driver relies on DMA transfers, setup the lost descriptors on resume and retrigger frame acquisition if needed. Signed-off-by: Robert Jarzmik Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pxa_camera.c | 56 ++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 28d8fd0679b..ead87ddaf7f 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -128,6 +128,8 @@ struct pxa_camera_dev { struct pxa_buffer *active; struct pxa_dma_desc *sg_tail[3]; + + u32 save_cicr[5]; }; static const char *pxa_cam_driver_description = "PXA_Camera"; @@ -997,10 +999,64 @@ static int pxa_camera_querycap(struct soc_camera_host *ici, return 0; } +static int pxa_camera_suspend(struct soc_camera_device *icd, pm_message_t state) +{ + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + struct pxa_camera_dev *pcdev = ici->priv; + int i = 0, ret = 0; + + pcdev->save_cicr[i++] = CICR0; + pcdev->save_cicr[i++] = CICR1; + pcdev->save_cicr[i++] = CICR2; + pcdev->save_cicr[i++] = CICR3; + pcdev->save_cicr[i++] = CICR4; + + if ((pcdev->icd) && (pcdev->icd->ops->suspend)) + ret = pcdev->icd->ops->suspend(pcdev->icd, state); + + return ret; +} + +static int pxa_camera_resume(struct soc_camera_device *icd) +{ + struct soc_camera_host *ici = + to_soc_camera_host(icd->dev.parent); + struct pxa_camera_dev *pcdev = ici->priv; + int i = 0, ret = 0; + + DRCMR68 = pcdev->dma_chans[0] | DRCMR_MAPVLD; + DRCMR69 = pcdev->dma_chans[1] | DRCMR_MAPVLD; + DRCMR70 = pcdev->dma_chans[2] | DRCMR_MAPVLD; + + CICR0 = pcdev->save_cicr[i++] & ~CICR0_ENB; + CICR1 = pcdev->save_cicr[i++]; + CICR2 = pcdev->save_cicr[i++]; + CICR3 = pcdev->save_cicr[i++]; + CICR4 = pcdev->save_cicr[i++]; + + if ((pcdev->icd) && (pcdev->icd->ops->resume)) + ret = pcdev->icd->ops->resume(pcdev->icd); + + /* Restart frame capture if active buffer exists */ + if (!ret && pcdev->active) { + /* Reset the FIFOs */ + CIFR |= CIFR_RESET_F; + /* Enable End-Of-Frame Interrupt */ + CICR0 &= ~CICR0_EOFM; + /* Restart the Capture Interface */ + CICR0 |= CICR0_ENB; + } + + return ret; +} + static struct soc_camera_host_ops pxa_soc_camera_host_ops = { .owner = THIS_MODULE, .add = pxa_camera_add_device, .remove = pxa_camera_remove_device, + .suspend = pxa_camera_suspend, + .resume = pxa_camera_resume, .set_fmt_cap = pxa_camera_set_fmt_cap, .try_fmt_cap = pxa_camera_try_fmt_cap, .init_videobuf = pxa_camera_init_videobuf, -- GitLab From 835f09c6594aa98cbfae05c5466a81fda3081d2c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 30 Jul 2008 18:54:48 -0300 Subject: [PATCH 0865/1024] V4L/DVB (8616): uvcvideo: Add support for two Bison Electronics webcams The Bison Electronics 5986:0300 and 5986:0303 webcams require the UVC_QUIRK_PROBE_MINMAX quirk. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_driver.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index b3c4d75e849..7e102034d38 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1884,7 +1884,7 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, - /* Packard Bell OEM Webcam */ + /* Packard Bell OEM Webcam - Bison Electronics */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x5986, @@ -1893,7 +1893,7 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, - /* Acer Crystal Eye webcam */ + /* Acer Crystal Eye webcam - Bison Electronics */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x5986, @@ -1902,7 +1902,7 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, - /* Medion Akoya Mini E1210 */ + /* Medion Akoya Mini E1210 - Bison Electronics */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x5986, @@ -1911,7 +1911,7 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, - /* Acer OrbiCam - Unknown vendor */ + /* Acer OrbiCam - Bison Electronics */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, .idVendor = 0x5986, @@ -1920,6 +1920,24 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Bison Electronics */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0300, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Clevo M570TU - Bison Electronics */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0303, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, /* Generic USB Video Class */ { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) }, {} -- GitLab From 04793dd041bbb88a39b768b714c725de2c339b51 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 31 Jul 2008 17:11:12 -0300 Subject: [PATCH 0866/1024] V4L/DVB (8617): uvcvideo: don't use stack-based buffers for USB transfers. Data buffers on the stack are not allowed for USB I/O. Use dynamically allocated buffers instead. Signed-off-by: Bruce Schmid Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_ctrl.c | 33 ++++++++++++++++++----------- drivers/media/video/uvc/uvc_video.c | 33 +++++++++++++++++++---------- 2 files changed, 43 insertions(+), 23 deletions(-) diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 626f4ad7e87..6ef3e5297de 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -585,13 +585,17 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video, struct uvc_control_mapping *mapping; struct uvc_menu_info *menu; unsigned int i; - __u8 data[8]; + __u8 *data; int ret; ctrl = uvc_find_control(video, v4l2_ctrl->id, &mapping); if (ctrl == NULL) return -EINVAL; + data = kmalloc(8, GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + memset(v4l2_ctrl, 0, sizeof *v4l2_ctrl); v4l2_ctrl->id = mapping->id; v4l2_ctrl->type = mapping->v4l2_type; @@ -604,8 +608,8 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video, if (ctrl->info->flags & UVC_CONTROL_GET_DEF) { if ((ret = uvc_query_ctrl(video->dev, GET_DEF, ctrl->entity->id, video->dev->intfnum, ctrl->info->selector, - &data, ctrl->info->size)) < 0) - return ret; + data, ctrl->info->size)) < 0) + goto out; v4l2_ctrl->default_value = uvc_get_le_value(data, mapping); } @@ -623,13 +627,15 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video, } } - return 0; + ret = 0; + goto out; case V4L2_CTRL_TYPE_BOOLEAN: v4l2_ctrl->minimum = 0; v4l2_ctrl->maximum = 1; v4l2_ctrl->step = 1; - return 0; + ret = 0; + goto out; default: break; @@ -638,26 +644,29 @@ int uvc_query_v4l2_ctrl(struct uvc_video_device *video, if (ctrl->info->flags & UVC_CONTROL_GET_MIN) { if ((ret = uvc_query_ctrl(video->dev, GET_MIN, ctrl->entity->id, video->dev->intfnum, ctrl->info->selector, - &data, ctrl->info->size)) < 0) - return ret; + data, ctrl->info->size)) < 0) + goto out; v4l2_ctrl->minimum = uvc_get_le_value(data, mapping); } if (ctrl->info->flags & UVC_CONTROL_GET_MAX) { if ((ret = uvc_query_ctrl(video->dev, GET_MAX, ctrl->entity->id, video->dev->intfnum, ctrl->info->selector, - &data, ctrl->info->size)) < 0) - return ret; + data, ctrl->info->size)) < 0) + goto out; v4l2_ctrl->maximum = uvc_get_le_value(data, mapping); } if (ctrl->info->flags & UVC_CONTROL_GET_RES) { if ((ret = uvc_query_ctrl(video->dev, GET_RES, ctrl->entity->id, video->dev->intfnum, ctrl->info->selector, - &data, ctrl->info->size)) < 0) - return ret; + data, ctrl->info->size)) < 0) + goto out; v4l2_ctrl->step = uvc_get_le_value(data, mapping); } - return 0; + ret = 0; +out: + kfree(data); + return ret; } diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index ad63794fda7..6854ac78a16 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -90,17 +90,20 @@ static void uvc_fixup_buffer_size(struct uvc_video_device *video, static int uvc_get_video_ctrl(struct uvc_video_device *video, struct uvc_streaming_control *ctrl, int probe, __u8 query) { - __u8 data[34]; - __u8 size; + __u8 *data; + __u16 size; int ret; size = video->dev->uvc_version >= 0x0110 ? 34 : 26; + data = kmalloc(size, GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + ret = __uvc_query_ctrl(video->dev, query, 0, video->streaming->intfnum, - probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size, + probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, data, size, UVC_CTRL_STREAMING_TIMEOUT); - if (ret < 0) - return ret; + goto out; ctrl->bmHint = le16_to_cpup((__le16 *)&data[0]); ctrl->bFormatIndex = data[2]; @@ -136,17 +139,22 @@ static int uvc_get_video_ctrl(struct uvc_video_device *video, */ uvc_fixup_buffer_size(video, ctrl); - return 0; +out: + kfree(data); + return ret; } int uvc_set_video_ctrl(struct uvc_video_device *video, struct uvc_streaming_control *ctrl, int probe) { - __u8 data[34]; - __u8 size; + __u8 *data; + __u16 size; + int ret; size = video->dev->uvc_version >= 0x0110 ? 34 : 26; - memset(data, 0, sizeof data); + data = kzalloc(size, GFP_KERNEL); + if (data == NULL) + return -ENOMEM; *(__le16 *)&data[0] = cpu_to_le16(ctrl->bmHint); data[2] = ctrl->bFormatIndex; @@ -174,10 +182,13 @@ int uvc_set_video_ctrl(struct uvc_video_device *video, data[33] = ctrl->bMaxVersion; } - return __uvc_query_ctrl(video->dev, SET_CUR, 0, + ret = __uvc_query_ctrl(video->dev, SET_CUR, 0, video->streaming->intfnum, - probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size, + probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, data, size, UVC_CTRL_STREAMING_TIMEOUT); + + kfree(data); + return ret; } int uvc_probe_video(struct uvc_video_device *video, -- GitLab From f7108f91cdcaca07c6a99777b2724093294f36ee Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Mon, 4 Aug 2008 10:56:07 +0200 Subject: [PATCH 0867/1024] cciss: return -EFAULT if copy_from_user() fails Return -EFAULT instead of -ENOMEM if copy_from_user() fails. Signed-off-by: Nikanth Karthikesan Acked-by: Mike Miller Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 0ce0c279aab..aeaf465922e 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1134,7 +1134,7 @@ static int cciss_ioctl(struct inode *inode, struct file *filep, if (ioc->Request.Type.Direction == XFER_WRITE) { if (copy_from_user (buff[sg_used], data_ptr, sz)) { - status = -ENOMEM; + status = -EFAULT; goto cleanup1; } } else { -- GitLab From a72da29b6cbc5cf918567f2a0d76df6871e94b01 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Mon, 4 Aug 2008 11:54:51 +0200 Subject: [PATCH 0868/1024] cciss: make rebuild_lun_table behave better This patch makes the rebuild_lun_table smart enough to not rip a logical volume out from under the OS. Without this fix if a customer is running hpacucli to monitor their storage the driver will blindly remove and re-add the disks whenever the utility calls the CCISS_REGNEWD ioctl. Unfortunately, both hpacucli and ACUXE call the ioctl repeatedly. Customers have reported IO coming to a standstill. Calling the ioctl is the problem, this patch is the fix. Signed-off-by: Stephen M. Cameron Signed-off-by: Mike Miller Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 336 +++++++++++++++++++++++++++--------------- drivers/block/cciss.h | 2 + 2 files changed, 216 insertions(+), 122 deletions(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index aeaf465922e..f9f10a15d25 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1330,13 +1330,46 @@ static void cciss_softirq_done(struct request *rq) spin_unlock_irqrestore(&h->lock, flags); } +/* This function gets the serial number of a logical drive via + * inquiry page 0x83. Serial no. is 16 bytes. If the serial + * number cannot be had, for whatever reason, 16 bytes of 0xff + * are returned instead. + */ +static void cciss_get_serial_no(int ctlr, int logvol, int withirq, + unsigned char *serial_no, int buflen) +{ +#define PAGE_83_INQ_BYTES 64 + int rc; + unsigned char *buf; + + if (buflen > 16) + buflen = 16; + memset(serial_no, 0xff, buflen); + buf = kzalloc(PAGE_83_INQ_BYTES, GFP_KERNEL); + if (!buf) + return; + memset(serial_no, 0, buflen); + if (withirq) + rc = sendcmd_withirq(CISS_INQUIRY, ctlr, buf, + PAGE_83_INQ_BYTES, 1, logvol, 0x83, TYPE_CMD); + else + rc = sendcmd(CISS_INQUIRY, ctlr, buf, + PAGE_83_INQ_BYTES, 1, logvol, 0x83, NULL, TYPE_CMD); + if (rc == IO_OK) + memcpy(serial_no, &buf[8], buflen); + kfree(buf); + return; +} + /* This function will check the usage_count of the drive to be updated/added. - * If the usage_count is zero then the drive information will be updated and - * the disk will be re-registered with the kernel. If not then it will be - * left alone for the next reboot. The exception to this is disk 0 which - * will always be left registered with the kernel since it is also the - * controller node. Any changes to disk 0 will show up on the next - * reboot. + * If the usage_count is zero and it is a heretofore unknown drive, or, + * the drive's capacity, geometry, or serial number has changed, + * then the drive information will be updated and the disk will be + * re-registered with the kernel. If these conditions don't hold, + * then it will be left alone for the next reboot. The exception to this + * is disk 0 which will always be left registered with the kernel since it + * is also the controller node. Any changes to disk 0 will show up on + * the next reboot. */ static void cciss_update_drive_info(int ctlr, int drv_index) { @@ -1347,9 +1380,65 @@ static void cciss_update_drive_info(int ctlr, int drv_index) sector_t total_size; unsigned long flags = 0; int ret = 0; + drive_info_struct *drvinfo; + + /* Get information about the disk and modify the driver structure */ + inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); + drvinfo = kmalloc(sizeof(*drvinfo), GFP_KERNEL); + if (inq_buff == NULL || drvinfo == NULL) + goto mem_msg; + + /* testing to see if 16-byte CDBs are already being used */ + if (h->cciss_read == CCISS_READ_16) { + cciss_read_capacity_16(h->ctlr, drv_index, 1, + &total_size, &block_size); + + } else { + cciss_read_capacity(ctlr, drv_index, 1, + &total_size, &block_size); + + /* if read_capacity returns all F's this volume is >2TB */ + /* in size so we switch to 16-byte CDB's for all */ + /* read/write ops */ + if (total_size == 0xFFFFFFFFULL) { + cciss_read_capacity_16(ctlr, drv_index, 1, + &total_size, &block_size); + h->cciss_read = CCISS_READ_16; + h->cciss_write = CCISS_WRITE_16; + } else { + h->cciss_read = CCISS_READ_10; + h->cciss_write = CCISS_WRITE_10; + } + } + + cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size, + inq_buff, drvinfo); + drvinfo->block_size = block_size; + drvinfo->nr_blocks = total_size + 1; + + cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no, + sizeof(drvinfo->serial_no)); + + /* Is it the same disk we already know, and nothing's changed? */ + if (h->drv[drv_index].raid_level != -1 && + ((memcmp(drvinfo->serial_no, + h->drv[drv_index].serial_no, 16) == 0) && + drvinfo->block_size == h->drv[drv_index].block_size && + drvinfo->nr_blocks == h->drv[drv_index].nr_blocks && + drvinfo->heads == h->drv[drv_index].heads && + drvinfo->sectors == h->drv[drv_index].sectors && + drvinfo->cylinders == h->drv[drv_index].cylinders)) { + /* The disk is unchanged, nothing to update */ + goto freeret; + } + + /* Not the same disk, or something's changed, so we need to */ + /* deregister it, and re-register it, if it's not in use. */ /* if the disk already exists then deregister it before proceeding */ - if (h->drv[drv_index].raid_level != -1) { + /* (unless it's the first disk (for the controller node). */ + if (h->drv[drv_index].raid_level != -1 && drv_index != 0) { + printk(KERN_WARNING "disk %d has changed.\n", drv_index); spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); h->drv[drv_index].busy_configuring = 1; spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); @@ -1364,43 +1453,23 @@ static void cciss_update_drive_info(int ctlr, int drv_index) /* If the disk is in use return */ if (ret) - return; - - /* Get information about the disk and modify the driver structure */ - inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); - if (inq_buff == NULL) - goto mem_msg; - - /* testing to see if 16-byte CDBs are already being used */ - if (h->cciss_read == CCISS_READ_16) { - cciss_read_capacity_16(h->ctlr, drv_index, 1, - &total_size, &block_size); - goto geo_inq; - } - - cciss_read_capacity(ctlr, drv_index, 1, - &total_size, &block_size); - - /* if read_capacity returns all F's this volume is >2TB in size */ - /* so we switch to 16-byte CDB's for all read/write ops */ - if (total_size == 0xFFFFFFFFULL) { - cciss_read_capacity_16(ctlr, drv_index, 1, - &total_size, &block_size); - h->cciss_read = CCISS_READ_16; - h->cciss_write = CCISS_WRITE_16; - } else { - h->cciss_read = CCISS_READ_10; - h->cciss_write = CCISS_WRITE_10; - } -geo_inq: - cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size, - inq_buff, &h->drv[drv_index]); + goto freeret; + + /* Save the new information from cciss_geometry_inquiry */ + /* and serial number inquiry. */ + h->drv[drv_index].block_size = drvinfo->block_size; + h->drv[drv_index].nr_blocks = drvinfo->nr_blocks; + h->drv[drv_index].heads = drvinfo->heads; + h->drv[drv_index].sectors = drvinfo->sectors; + h->drv[drv_index].cylinders = drvinfo->cylinders; + h->drv[drv_index].raid_level = drvinfo->raid_level; + memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16); ++h->num_luns; disk = h->gendisk[drv_index]; set_capacity(disk, h->drv[drv_index].nr_blocks); - /* if it's the controller it's already added */ + /* if it's the controller (if drv_index == 0) it's already added */ if (drv_index) { disk->queue = blk_init_queue(do_cciss_request, &h->lock); sprintf(disk->disk_name, "cciss/c%dd%d", ctlr, drv_index); @@ -1437,6 +1506,7 @@ geo_inq: freeret: kfree(inq_buff); + kfree(drvinfo); return; mem_msg: printk(KERN_ERR "cciss: out of memory\n"); @@ -1478,7 +1548,6 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) int ctlr = h->ctlr; int num_luns; ReportLunData_struct *ld_buff = NULL; - drive_info_struct *drv = NULL; int return_code; int listlength = 0; int i; @@ -1494,98 +1563,117 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) return -EBUSY; } h->busy_configuring = 1; + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - /* if del_disk is NULL then we are being called to add a new disk - * and update the logical drive table. If it is not NULL then - * we will check if the disk is in use or not. - */ - if (del_disk != NULL) { - drv = get_drv(del_disk); - drv->busy_configuring = 1; - spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - return_code = deregister_disk(del_disk, drv, 1); - drv->busy_configuring = 0; - h->busy_configuring = 0; - return return_code; - } else { - spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; - ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); - if (ld_buff == NULL) - goto mem_msg; - - return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff, - sizeof(ReportLunData_struct), 0, - 0, 0, TYPE_CMD); - - if (return_code == IO_OK) { - listlength = - be32_to_cpu(*(__be32 *) ld_buff->LUNListLength); - } else { /* reading number of logical volumes failed */ - printk(KERN_WARNING "cciss: report logical volume" - " command failed\n"); - listlength = 0; - goto freeret; - } + ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); + if (ld_buff == NULL) + goto mem_msg; + + return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff, + sizeof(ReportLunData_struct), 0, + 0, 0, TYPE_CMD); - num_luns = listlength / 8; /* 8 bytes per entry */ - if (num_luns > CISS_MAX_LUN) { - num_luns = CISS_MAX_LUN; - printk(KERN_WARNING "cciss: more luns configured" - " on controller than can be handled by" - " this driver.\n"); + if (return_code == IO_OK) + listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength); + else { /* reading number of logical volumes failed */ + printk(KERN_WARNING "cciss: report logical volume" + " command failed\n"); + listlength = 0; + goto freeret; + } + + num_luns = listlength / 8; /* 8 bytes per entry */ + if (num_luns > CISS_MAX_LUN) { + num_luns = CISS_MAX_LUN; + printk(KERN_WARNING "cciss: more luns configured" + " on controller than can be handled by" + " this driver.\n"); + } + + /* Compare controller drive array to driver's drive array */ + /* to see if any drives are missing on the controller due */ + /* to action of Array Config Utility (user deletes drive) */ + /* and deregister logical drives which have disappeared. */ + for (i = 0; i <= h->highest_lun; i++) { + int j; + drv_found = 0; + for (j = 0; j < num_luns; j++) { + memcpy(&lunid, &ld_buff->LUN[j][0], 4); + lunid = le32_to_cpu(lunid); + if (h->drv[i].LunID == lunid) { + drv_found = 1; + break; + } + } + if (!drv_found) { + /* Deregister it from the OS, it's gone. */ + spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); + h->drv[i].busy_configuring = 1; + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + return_code = deregister_disk(h->gendisk[i], + &h->drv[i], 1); + h->drv[i].busy_configuring = 0; } + } - /* Compare controller drive array to drivers drive array. - * Check for updates in the drive information and any new drives - * on the controller. - */ - for (i = 0; i < num_luns; i++) { - int j; + /* Compare controller drive array to driver's drive array. + * Check for updates in the drive information and any new drives + * on the controller due to ACU adding logical drives, or changing + * a logical drive's size, etc. Reregister any new/changed drives + */ + for (i = 0; i < num_luns; i++) { + int j; - drv_found = 0; + drv_found = 0; - lunid = (0xff & - (unsigned int)(ld_buff->LUN[i][3])) << 24; - lunid |= (0xff & - (unsigned int)(ld_buff->LUN[i][2])) << 16; - lunid |= (0xff & - (unsigned int)(ld_buff->LUN[i][1])) << 8; - lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]); + memcpy(&lunid, &ld_buff->LUN[i][0], 4); + lunid = le32_to_cpu(lunid); - /* Find if the LUN is already in the drive array - * of the controller. If so then update its info - * if not is use. If it does not exist then find - * the first free index and add it. - */ - for (j = 0; j <= h->highest_lun; j++) { - if (h->drv[j].LunID == lunid) { - drv_index = j; - drv_found = 1; - } + /* Find if the LUN is already in the drive array + * of the driver. If so then update its info + * if not in use. If it does not exist then find + * the first free index and add it. + */ + for (j = 0; j <= h->highest_lun; j++) { + if (h->drv[j].raid_level != -1 && + h->drv[j].LunID == lunid) { + drv_index = j; + drv_found = 1; + break; } + } - /* check if the drive was found already in the array */ - if (!drv_found) { - drv_index = cciss_find_free_drive_index(ctlr); - if (drv_index == -1) - goto freeret; - - /*Check if the gendisk needs to be allocated */ + /* check if the drive was found already in the array */ + if (!drv_found) { + drv_index = cciss_find_free_drive_index(ctlr); + if (drv_index == -1) + goto freeret; + /*Check if the gendisk needs to be allocated */ + if (!h->gendisk[drv_index]) { + h->gendisk[drv_index] = + alloc_disk(1 << NWD_SHIFT); if (!h->gendisk[drv_index]){ - h->gendisk[drv_index] = alloc_disk(1 << NWD_SHIFT); - if (!h->gendisk[drv_index]){ - printk(KERN_ERR "cciss: could not allocate new disk %d\n", drv_index); - goto mem_msg; - } + printk(KERN_ERR "cciss: could not " + "allocate new disk %d\n", + drv_index); + goto mem_msg; } } h->drv[drv_index].LunID = lunid; - cciss_update_drive_info(ctlr, drv_index); - } /* end for */ - } /* end else */ + + /* Don't need to mark this busy because nobody + * else knows about this disk yet to contend + * for access to it. + */ + h->drv[drv_index].busy_configuring = 0; + wmb(); + + } + cciss_update_drive_info(ctlr, drv_index); + } /* end for */ freeret: kfree(ld_buff); @@ -1597,6 +1685,7 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) return -1; mem_msg: printk(KERN_ERR "cciss: out of memory\n"); + h->busy_configuring = 0; goto freeret; } @@ -1652,15 +1741,15 @@ static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, * other than disk 0 we will call put_disk. We do not * do this for disk 0 as we need it to be able to * configure the controller. - */ + */ if (clear_all){ /* This isn't pretty, but we need to find the * disk in our array and NULL our the pointer. * This is so that we will call alloc_disk if * this index is used again later. - */ + */ for (i=0; i < CISS_MAX_LUN; i++){ - if(h->gendisk[i] == disk){ + if (h->gendisk[i] == disk) { h->gendisk[i] = NULL; break; } @@ -1688,7 +1777,7 @@ static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, if (drv == h->drv + h->highest_lun) { /* if so, find the new hightest lun */ int i, newhighest = -1; - for (i = 0; i < h->highest_lun; i++) { + for (i = 0; i <= h->highest_lun; i++) { /* if the disk has size > 0, it is available */ if (h->drv[i].heads) newhighest = i; @@ -3318,6 +3407,9 @@ geo_inq: cciss_geometry_inquiry(cntl_num, i, 0, total_size, block_size, inq_buff, &hba[cntl_num]->drv[i]); + cciss_get_serial_no(cntl_num, i, 0, + hba[cntl_num]->drv[i].serial_no, + sizeof(hba[cntl_num]->drv[i].serial_no)); } else { /* initialize raid_level to indicate a free space */ hba[cntl_num]->drv[i].raid_level = -1; diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h index b70988dd33e..24a7efa993a 100644 --- a/drivers/block/cciss.h +++ b/drivers/block/cciss.h @@ -39,6 +39,8 @@ typedef struct _drive_info_struct *to prevent it from being opened or it's queue *from being started. */ + __u8 serial_no[16]; /* from inquiry page 0x83, */ + /* not necc. null terminated. */ } drive_info_struct; #ifdef CONFIG_CISS_SCSI_TAPE -- GitLab From 6ae5ce8e8d4de666f31286808d2285aa6a50fa40 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Mon, 4 Aug 2008 11:54:52 +0200 Subject: [PATCH 0869/1024] cciss: remove redundant code This patch removes redundant code where ever logical volumes are added or removed. It adds 3 new functions that are called instead of having the same code spread throughout the driver. It also removes the cciss_getgeometry function. The patch is fairly complex but we haven't figured out how to make it any simpler and still do everything that needs to be done. Some of the complexity comes from having to special case booting from cciss. Otherwise the gendisk doesn't get added in time and the switchroot will fail. Signed-off-by: Stephen M. Cameron Signed-off-by: Mike Miller Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 473 +++++++++++++++--------------------------- 1 file changed, 169 insertions(+), 304 deletions(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index f9f10a15d25..08255644e80 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -159,7 +159,7 @@ static int cciss_ioctl(struct inode *inode, struct file *filep, static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo); static int cciss_revalidate(struct gendisk *disk); -static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk); +static int rebuild_lun_table(ctlr_info_t *h, int first_time); static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, int clear_all); @@ -171,7 +171,6 @@ static void cciss_geometry_inquiry(int ctlr, int logvol, int withirq, sector_t total_size, unsigned int block_size, InquiryData_struct *inq_buff, drive_info_struct *drv); -static void cciss_getgeometry(int cntl_num); static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *, __u32); static void start_io(ctlr_info_t *h); @@ -929,8 +928,10 @@ static int cciss_ioctl(struct inode *inode, struct file *filep, return 0; } + case CCISS_DEREGDISK: + case CCISS_REGNEWD: case CCISS_REVALIDVOLS: - return rebuild_lun_table(host, NULL); + return rebuild_lun_table(host, 0); case CCISS_GETLUNINFO:{ LogvolInfo_struct luninfo; @@ -943,12 +944,6 @@ static int cciss_ioctl(struct inode *inode, struct file *filep, return -EFAULT; return 0; } - case CCISS_DEREGDISK: - return rebuild_lun_table(host, disk); - - case CCISS_REGNEWD: - return rebuild_lun_table(host, NULL); - case CCISS_PASSTHRU: { IOCTL_Command_struct iocommand; @@ -1361,6 +1356,42 @@ static void cciss_get_serial_no(int ctlr, int logvol, int withirq, return; } +static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, + int drv_index) +{ + disk->queue = blk_init_queue(do_cciss_request, &h->lock); + sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index); + disk->major = h->major; + disk->first_minor = drv_index << NWD_SHIFT; + disk->fops = &cciss_fops; + disk->private_data = &h->drv[drv_index]; + + /* Set up queue information */ + blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask); + + /* This is a hardware imposed limit. */ + blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES); + + /* This is a limit in the driver and could be eliminated. */ + blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES); + + blk_queue_max_sectors(disk->queue, h->cciss_max_sectors); + + blk_queue_softirq_done(disk->queue, cciss_softirq_done); + + disk->queue->queuedata = h; + + blk_queue_hardsect_size(disk->queue, + h->drv[drv_index].block_size); + + /* Make sure all queue data is written out before */ + /* setting h->drv[drv_index].queue, as setting this */ + /* allows the interrupt handler to start the queue */ + wmb(); + h->drv[drv_index].queue = disk->queue; + add_disk(disk); +} + /* This function will check the usage_count of the drive to be updated/added. * If the usage_count is zero and it is a heretofore unknown drive, or, * the drive's capacity, geometry, or serial number has changed, @@ -1371,7 +1402,7 @@ static void cciss_get_serial_no(int ctlr, int logvol, int withirq, * is also the controller node. Any changes to disk 0 will show up on * the next reboot. */ -static void cciss_update_drive_info(int ctlr, int drv_index) +static void cciss_update_drive_info(int ctlr, int drv_index, int first_time) { ctlr_info_t *h = hba[ctlr]; struct gendisk *disk; @@ -1381,6 +1412,7 @@ static void cciss_update_drive_info(int ctlr, int drv_index) unsigned long flags = 0; int ret = 0; drive_info_struct *drvinfo; + int was_only_controller_node; /* Get information about the disk and modify the driver structure */ inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); @@ -1388,6 +1420,13 @@ static void cciss_update_drive_info(int ctlr, int drv_index) if (inq_buff == NULL || drvinfo == NULL) goto mem_msg; + /* See if we're trying to update the "controller node" + * this will happen the when the first logical drive gets + * created by ACU. + */ + was_only_controller_node = (drv_index == 0 && + h->drv[0].raid_level == -1); + /* testing to see if 16-byte CDBs are already being used */ if (h->cciss_read == CCISS_READ_16) { cciss_read_capacity_16(h->ctlr, drv_index, 1, @@ -1427,25 +1466,26 @@ static void cciss_update_drive_info(int ctlr, int drv_index) drvinfo->nr_blocks == h->drv[drv_index].nr_blocks && drvinfo->heads == h->drv[drv_index].heads && drvinfo->sectors == h->drv[drv_index].sectors && - drvinfo->cylinders == h->drv[drv_index].cylinders)) { + drvinfo->cylinders == h->drv[drv_index].cylinders)) /* The disk is unchanged, nothing to update */ goto freeret; - } - /* Not the same disk, or something's changed, so we need to */ - /* deregister it, and re-register it, if it's not in use. */ - - /* if the disk already exists then deregister it before proceeding */ - /* (unless it's the first disk (for the controller node). */ + /* If we get here it's not the same disk, or something's changed, + * so we need to * deregister it, and re-register it, if it's not + * in use. + * If the disk already exists then deregister it before proceeding + * (unless it's the first disk (for the controller node). + */ if (h->drv[drv_index].raid_level != -1 && drv_index != 0) { printk(KERN_WARNING "disk %d has changed.\n", drv_index); spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); h->drv[drv_index].busy_configuring = 1; spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - /* deregister_disk sets h->drv[drv_index].queue = NULL */ - /* which keeps the interrupt handler from starting */ - /* the queue. */ + /* deregister_disk sets h->drv[drv_index].queue = NULL + * which keeps the interrupt handler from starting + * the queue. + */ ret = deregister_disk(h->gendisk[drv_index], &h->drv[drv_index], 0); h->drv[drv_index].busy_configuring = 0; @@ -1455,8 +1495,9 @@ static void cciss_update_drive_info(int ctlr, int drv_index) if (ret) goto freeret; - /* Save the new information from cciss_geometry_inquiry */ - /* and serial number inquiry. */ + /* Save the new information from cciss_geometry_inquiry + * and serial number inquiry. + */ h->drv[drv_index].block_size = drvinfo->block_size; h->drv[drv_index].nr_blocks = drvinfo->nr_blocks; h->drv[drv_index].heads = drvinfo->heads; @@ -1469,46 +1510,20 @@ static void cciss_update_drive_info(int ctlr, int drv_index) disk = h->gendisk[drv_index]; set_capacity(disk, h->drv[drv_index].nr_blocks); - /* if it's the controller (if drv_index == 0) it's already added */ - if (drv_index) { - disk->queue = blk_init_queue(do_cciss_request, &h->lock); - sprintf(disk->disk_name, "cciss/c%dd%d", ctlr, drv_index); - disk->major = h->major; - disk->first_minor = drv_index << NWD_SHIFT; - disk->fops = &cciss_fops; - disk->private_data = &h->drv[drv_index]; - - /* Set up queue information */ - blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask); - - /* This is a hardware imposed limit. */ - blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES); - - /* This is a limit in the driver and could be eliminated. */ - blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES); - - blk_queue_max_sectors(disk->queue, h->cciss_max_sectors); - - blk_queue_softirq_done(disk->queue, cciss_softirq_done); - - disk->queue->queuedata = hba[ctlr]; - - blk_queue_hardsect_size(disk->queue, - hba[ctlr]->drv[drv_index].block_size); - - /* Make sure all queue data is written out before */ - /* setting h->drv[drv_index].queue, as setting this */ - /* allows the interrupt handler to start the queue */ - wmb(); - h->drv[drv_index].queue = disk->queue; - add_disk(disk); - } + /* If it's not disk 0 (drv_index != 0) + * or if it was disk 0, but there was previously + * no actual corresponding configured logical drive + * (raid_leve == -1) then we want to update the + * logical drive's information. + */ + if (drv_index || first_time) + cciss_add_disk(h, disk, drv_index); - freeret: +freeret: kfree(inq_buff); kfree(drvinfo); return; - mem_msg: +mem_msg: printk(KERN_ERR "cciss: out of memory\n"); goto freeret; } @@ -1533,6 +1548,73 @@ static int cciss_find_free_drive_index(int ctlr) return -1; } +/* cciss_add_gendisk finds a free hba[]->drv structure + * and allocates a gendisk if needed, and sets the lunid + * in the drvinfo structure. It returns the index into + * the ->drv[] array, or -1 if none are free. + * is_controller_node indicates whether highest_lun should + * count this disk, or if it's only being added to provide + * a means to talk to the controller in case no logical + * drives have yet been configured. + */ +static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid) +{ + int drv_index; + + drv_index = cciss_find_free_drive_index(h->ctlr); + if (drv_index == -1) + return -1; + /*Check if the gendisk needs to be allocated */ + if (!h->gendisk[drv_index]) { + h->gendisk[drv_index] = + alloc_disk(1 << NWD_SHIFT); + if (!h->gendisk[drv_index]) { + printk(KERN_ERR "cciss%d: could not " + "allocate a new disk %d\n", + h->ctlr, drv_index); + return -1; + } + } + h->drv[drv_index].LunID = lunid; + + /* Don't need to mark this busy because nobody */ + /* else knows about this disk yet to contend */ + /* for access to it. */ + h->drv[drv_index].busy_configuring = 0; + wmb(); + return drv_index; +} + +/* This is for the special case of a controller which + * has no logical drives. In this case, we still need + * to register a disk so the controller can be accessed + * by the Array Config Utility. + */ +static void cciss_add_controller_node(ctlr_info_t *h) +{ + struct gendisk *disk; + int drv_index; + + if (h->gendisk[0] != NULL) /* already did this? Then bail. */ + return; + + drv_index = cciss_add_gendisk(h, 0); + if (drv_index == -1) { + printk(KERN_WARNING "cciss%d: could not " + "add disk 0.\n", h->ctlr); + return; + } + h->drv[drv_index].block_size = 512; + h->drv[drv_index].nr_blocks = 0; + h->drv[drv_index].heads = 0; + h->drv[drv_index].sectors = 0; + h->drv[drv_index].cylinders = 0; + h->drv[drv_index].raid_level = -1; + memset(h->drv[drv_index].serial_no, 0, 16); + disk = h->gendisk[drv_index]; + cciss_add_disk(h, disk, drv_index); +} + /* This function will add and remove logical drives from the Logical * drive array of the controller and maintain persistency of ordering * so that mount points are preserved until the next reboot. This allows @@ -1540,10 +1622,8 @@ static int cciss_find_free_drive_index(int ctlr) * without a re-ordering of those drives. * INPUT * h = The controller to perform the operations on - * del_disk = The disk to remove if specified. If the value given - * is NULL then no disk is removed. */ -static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) +static int rebuild_lun_table(ctlr_info_t *h, int first_time) { int ctlr = h->ctlr; int num_luns; @@ -1556,6 +1636,9 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) __u32 lunid = 0; unsigned long flags; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + /* Set busy_configuring flag for this operation */ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); if (h->busy_configuring) { @@ -1565,9 +1648,6 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) h->busy_configuring = 1; spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - if (!capable(CAP_SYS_RAWIO)) - return -EPERM; - ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); if (ld_buff == NULL) goto mem_msg; @@ -1593,10 +1673,14 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) " this driver.\n"); } - /* Compare controller drive array to driver's drive array */ - /* to see if any drives are missing on the controller due */ - /* to action of Array Config Utility (user deletes drive) */ - /* and deregister logical drives which have disappeared. */ + if (num_luns == 0) + cciss_add_controller_node(h); + + /* Compare controller drive array to driver's drive array + * to see if any drives are missing on the controller due + * to action of Array Config Utility (user deletes drive) + * and deregister logical drives which have disappeared. + */ for (i = 0; i <= h->highest_lun; i++) { int j; drv_found = 0; @@ -1648,34 +1732,14 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) /* check if the drive was found already in the array */ if (!drv_found) { - drv_index = cciss_find_free_drive_index(ctlr); + drv_index = cciss_add_gendisk(h, lunid); if (drv_index == -1) goto freeret; - /*Check if the gendisk needs to be allocated */ - if (!h->gendisk[drv_index]) { - h->gendisk[drv_index] = - alloc_disk(1 << NWD_SHIFT); - if (!h->gendisk[drv_index]){ - printk(KERN_ERR "cciss: could not " - "allocate new disk %d\n", - drv_index); - goto mem_msg; - } - } - h->drv[drv_index].LunID = lunid; - - /* Don't need to mark this busy because nobody - * else knows about this disk yet to contend - * for access to it. - */ - h->drv[drv_index].busy_configuring = 0; - wmb(); - } - cciss_update_drive_info(ctlr, drv_index); + cciss_update_drive_info(ctlr, drv_index, first_time); } /* end for */ - freeret: +freeret: kfree(ld_buff); h->busy_configuring = 0; /* We return -1 here to tell the ACU that we have registered/updated @@ -1683,7 +1747,7 @@ static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) * additional times. */ return -1; - mem_msg: +mem_msg: printk(KERN_ERR "cciss: out of memory\n"); h->busy_configuring = 0; goto freeret; @@ -3288,139 +3352,9 @@ err_out_free_res: return err; } -/* - * Gets information about the local volumes attached to the controller. +/* Function to find the first free pointer into our hba[] array + * Returns -1 if no free entries are left. */ -static void cciss_getgeometry(int cntl_num) -{ - ReportLunData_struct *ld_buff; - InquiryData_struct *inq_buff; - int return_code; - int i; - int listlength = 0; - __u32 lunid = 0; - unsigned block_size; - sector_t total_size; - - ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); - if (ld_buff == NULL) { - printk(KERN_ERR "cciss: out of memory\n"); - return; - } - inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); - if (inq_buff == NULL) { - printk(KERN_ERR "cciss: out of memory\n"); - kfree(ld_buff); - return; - } - /* Get the firmware version */ - return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff, - sizeof(InquiryData_struct), 0, 0, 0, NULL, - TYPE_CMD); - if (return_code == IO_OK) { - hba[cntl_num]->firm_ver[0] = inq_buff->data_byte[32]; - hba[cntl_num]->firm_ver[1] = inq_buff->data_byte[33]; - hba[cntl_num]->firm_ver[2] = inq_buff->data_byte[34]; - hba[cntl_num]->firm_ver[3] = inq_buff->data_byte[35]; - } else { /* send command failed */ - - printk(KERN_WARNING "cciss: unable to determine firmware" - " version of controller\n"); - } - /* Get the number of logical volumes */ - return_code = sendcmd(CISS_REPORT_LOG, cntl_num, ld_buff, - sizeof(ReportLunData_struct), 0, 0, 0, NULL, - TYPE_CMD); - - if (return_code == IO_OK) { -#ifdef CCISS_DEBUG - printk("LUN Data\n--------------------------\n"); -#endif /* CCISS_DEBUG */ - - listlength |= - (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24; - listlength |= - (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16; - listlength |= - (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8; - listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]); - } else { /* reading number of logical volumes failed */ - - printk(KERN_WARNING "cciss: report logical volume" - " command failed\n"); - listlength = 0; - } - hba[cntl_num]->num_luns = listlength / 8; // 8 bytes pre entry - if (hba[cntl_num]->num_luns > CISS_MAX_LUN) { - printk(KERN_ERR - "ciss: only %d number of logical volumes supported\n", - CISS_MAX_LUN); - hba[cntl_num]->num_luns = CISS_MAX_LUN; - } -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "Length = %x %x %x %x = %d\n", - ld_buff->LUNListLength[0], ld_buff->LUNListLength[1], - ld_buff->LUNListLength[2], ld_buff->LUNListLength[3], - hba[cntl_num]->num_luns); -#endif /* CCISS_DEBUG */ - - hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns - 1; - for (i = 0; i < CISS_MAX_LUN; i++) { - if (i < hba[cntl_num]->num_luns) { - lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3])) - << 24; - lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2])) - << 16; - lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1])) - << 8; - lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]); - - hba[cntl_num]->drv[i].LunID = lunid; - -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "LUN[%d]: %x %x %x %x = %x\n", i, - ld_buff->LUN[i][0], ld_buff->LUN[i][1], - ld_buff->LUN[i][2], ld_buff->LUN[i][3], - hba[cntl_num]->drv[i].LunID); -#endif /* CCISS_DEBUG */ - - /* testing to see if 16-byte CDBs are already being used */ - if(hba[cntl_num]->cciss_read == CCISS_READ_16) { - cciss_read_capacity_16(cntl_num, i, 0, - &total_size, &block_size); - goto geo_inq; - } - cciss_read_capacity(cntl_num, i, 0, &total_size, &block_size); - - /* If read_capacity returns all F's the logical is >2TB */ - /* so we switch to 16-byte CDBs for all read/write ops */ - if(total_size == 0xFFFFFFFFULL) { - cciss_read_capacity_16(cntl_num, i, 0, - &total_size, &block_size); - hba[cntl_num]->cciss_read = CCISS_READ_16; - hba[cntl_num]->cciss_write = CCISS_WRITE_16; - } else { - hba[cntl_num]->cciss_read = CCISS_READ_10; - hba[cntl_num]->cciss_write = CCISS_WRITE_10; - } -geo_inq: - cciss_geometry_inquiry(cntl_num, i, 0, total_size, - block_size, inq_buff, - &hba[cntl_num]->drv[i]); - cciss_get_serial_no(cntl_num, i, 0, - hba[cntl_num]->drv[i].serial_no, - sizeof(hba[cntl_num]->drv[i].serial_no)); - } else { - /* initialize raid_level to indicate a free space */ - hba[cntl_num]->drv[i].raid_level = -1; - } - } - kfree(ld_buff); - kfree(inq_buff); -} - -/* Function to find the first free pointer into our hba[] array */ -/* Returns -1 if no free entries are left. */ static int alloc_cciss_hba(void) { int i; @@ -3432,11 +3366,6 @@ static int alloc_cciss_hba(void) p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL); if (!p) goto Enomem; - p->gendisk[0] = alloc_disk(1 << NWD_SHIFT); - if (!p->gendisk[0]) { - kfree(p); - goto Enomem; - } hba[i] = p; return i; } @@ -3564,11 +3493,13 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, ((hba[i]->nr_cmds + BITS_PER_LONG - 1) / BITS_PER_LONG) * sizeof(unsigned long)); -#ifdef CCISS_DEBUG - printk(KERN_DEBUG "Scanning for drives on controller cciss%d\n", i); -#endif /* CCISS_DEBUG */ - - cciss_getgeometry(i); + hba[i]->num_luns = 0; + hba[i]->highest_lun = -1; + for (j = 0; j < CISS_MAX_LUN; j++) { + hba[i]->drv[j].raid_level = -1; + hba[i]->drv[j].queue = NULL; + hba[i]->gendisk[j] = NULL; + } cciss_scsi_setup(i); @@ -3581,76 +3512,10 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, hba[i]->busy_initializing = 0; - do { - drive_info_struct *drv = &(hba[i]->drv[j]); - struct gendisk *disk = hba[i]->gendisk[j]; - struct request_queue *q; - - /* Check if the disk was allocated already */ - if (!disk){ - hba[i]->gendisk[j] = alloc_disk(1 << NWD_SHIFT); - disk = hba[i]->gendisk[j]; - } - - /* Check that the disk was able to be allocated */ - if (!disk) { - printk(KERN_ERR "cciss: unable to allocate memory for disk %d\n", j); - goto clean4; - } - - q = blk_init_queue(do_cciss_request, &hba[i]->lock); - if (!q) { - printk(KERN_ERR - "cciss: unable to allocate queue for disk %d\n", - j); - goto clean4; - } - drv->queue = q; - - blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask); - - /* This is a hardware imposed limit. */ - blk_queue_max_hw_segments(q, MAXSGENTRIES); - - /* This is a limit in the driver and could be eliminated. */ - blk_queue_max_phys_segments(q, MAXSGENTRIES); - - blk_queue_max_sectors(q, hba[i]->cciss_max_sectors); - - blk_queue_softirq_done(q, cciss_softirq_done); - - q->queuedata = hba[i]; - sprintf(disk->disk_name, "cciss/c%dd%d", i, j); - disk->major = hba[i]->major; - disk->first_minor = j << NWD_SHIFT; - disk->fops = &cciss_fops; - disk->queue = q; - disk->private_data = drv; - disk->driverfs_dev = &pdev->dev; - /* we must register the controller even if no disks exist */ - /* this is for the online array utilities */ - if (!drv->heads && j) - continue; - blk_queue_hardsect_size(q, drv->block_size); - set_capacity(disk, drv->nr_blocks); - j++; - } while (j <= hba[i]->highest_lun); - - /* Make sure all queue data is written out before */ - /* interrupt handler, triggered by add_disk, */ - /* is allowed to start them. */ - wmb(); - - for (j = 0; j <= hba[i]->highest_lun; j++) - add_disk(hba[i]->gendisk[j]); - - /* we must register the controller even if no disks exist */ - if (hba[i]->highest_lun == -1) - add_disk(hba[i]->gendisk[0]); - + rebuild_lun_table(hba[i], 1); return 1; - clean4: +clean4: #ifdef CONFIG_CISS_SCSI_TAPE kfree(hba[i]->scsi_rejects.complete); #endif @@ -3665,9 +3530,9 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle); free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]); - clean2: +clean2: unregister_blkdev(hba[i]->major, hba[i]->devname); - clean1: +clean1: hba[i]->busy_initializing = 0; /* cleanup any queues that may have been initialized */ for (j=0; j <= hba[i]->highest_lun; j++){ -- GitLab From eece695f8bf9d1aacf3a119ab8e21db31948e40b Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Mon, 4 Aug 2008 11:54:53 +0200 Subject: [PATCH 0870/1024] cciss: fix negative logical drive count in procfs This patch fixes a problem where the logical volume count may go negative. In some instances if several logical are configured on a controller and all of them are deleted using the online utilities the volume count in /proc may go negative with no way get it correct again. Signed-off-by: Stephen M. Cameron Signed-off-by: Mike Miller Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 08255644e80..9ffa821fbfd 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -1533,15 +1533,18 @@ mem_msg: * where new drives will be added. If the index to be returned is greater * than the highest_lun index for the controller then highest_lun is set * to this new index. If there are no available indexes then -1 is returned. + * "controller_node" is used to know if this is a real logical drive, or just + * the controller node, which determines if this counts towards highest_lun. */ -static int cciss_find_free_drive_index(int ctlr) +static int cciss_find_free_drive_index(int ctlr, int controller_node) { int i; for (i = 0; i < CISS_MAX_LUN; i++) { if (hba[ctlr]->drv[i].raid_level == -1) { if (i > hba[ctlr]->highest_lun) - hba[ctlr]->highest_lun = i; + if (!controller_node) + hba[ctlr]->highest_lun = i; return i; } } @@ -1557,11 +1560,11 @@ static int cciss_find_free_drive_index(int ctlr) * a means to talk to the controller in case no logical * drives have yet been configured. */ -static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid) +static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node) { int drv_index; - drv_index = cciss_find_free_drive_index(h->ctlr); + drv_index = cciss_find_free_drive_index(h->ctlr, controller_node); if (drv_index == -1) return -1; /*Check if the gendisk needs to be allocated */ @@ -1598,7 +1601,7 @@ static void cciss_add_controller_node(ctlr_info_t *h) if (h->gendisk[0] != NULL) /* already did this? Then bail. */ return; - drv_index = cciss_add_gendisk(h, 0); + drv_index = cciss_add_gendisk(h, 0, 1); if (drv_index == -1) { printk(KERN_WARNING "cciss%d: could not " "add disk 0.\n", h->ctlr); @@ -1732,7 +1735,7 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time) /* check if the drive was found already in the array */ if (!drv_found) { - drv_index = cciss_add_gendisk(h, lunid); + drv_index = cciss_add_gendisk(h, lunid, 0); if (drv_index == -1) goto freeret; } -- GitLab From f4a93bcda74edfe6977dcf296ed8c86119638871 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Mon, 4 Aug 2008 11:54:53 +0200 Subject: [PATCH 0871/1024] cciss: change the way we notify scsi midlayer of tape drives This patch changes way we notify the scsi layer that something has changed on the SCSI tape side of the driver. The user can now just tell the driver to rescan a particular controller rather than having to know the SCSI nexus to echo into the SCSI mid-layer. Signed-off-by: Stephen M. Cameron Signed-off-by: Mike Miller Signed-off-by: Jens Axboe --- Documentation/cciss.txt | 21 ++--- drivers/block/cciss_scsi.c | 157 ++++++++++++++++++++++++++++--------- 2 files changed, 124 insertions(+), 54 deletions(-) diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt index 63e59b8847c..8244c6442fa 100644 --- a/Documentation/cciss.txt +++ b/Documentation/cciss.txt @@ -112,27 +112,18 @@ Hot plug support for SCSI tape drives Hot plugging of SCSI tape drives is supported, with some caveats. The cciss driver must be informed that changes to the SCSI bus -have been made, in addition to and prior to informing the SCSI -mid layer. This may be done via the /proc filesystem. For example: +have been made. This may be done via the /proc filesystem. +For example: echo "rescan" > /proc/scsi/cciss0/1 -This causes the adapter to query the adapter about changes to the -physical SCSI buses and/or fibre channel arbitrated loop and the +This causes the driver to query the adapter about changes to the +physical SCSI buses and/or fibre channel arbitrated loop and the driver to make note of any new or removed sequential access devices or medium changers. The driver will output messages indicating what devices have been added or removed and the controller, bus, target and -lun used to address the device. Once this is done, the SCSI mid layer -can be informed of changes to the virtual SCSI bus which the driver -presents to it in the usual way. For example: - - echo scsi add-single-device 3 2 1 0 > /proc/scsi/scsi - -to add a device on controller 3, bus 2, target 1, lun 0. Note that -the driver makes an effort to preserve the devices positions -in the virtual SCSI bus, so if you are only moving tape drives -around on the same adapter and not adding or removing tape drives -from the adapter, informing the SCSI mid layer may not be necessary. +lun used to address the device. It then notifies the SCSI mid layer +of these changes. Note that the naming convention of the /proc filesystem entries contains a number in addition to the driver name. (E.g. "cciss0" diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index e4bf9a11ca0..c673ff14126 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -358,10 +358,15 @@ find_bus_target_lun(int ctlr, int *bus, int *target, int *lun) } return (!found); } +struct scsi2map { + char scsi3addr[8]; + int bus, target, lun; +}; static int cciss_scsi_add_entry(int ctlr, int hostno, - unsigned char *scsi3addr, int devtype) + unsigned char *scsi3addr, int devtype, + struct scsi2map *added, int *nadded) { /* assumes hba[ctlr]->scsi_ctlr->lock is held */ int n = ccissscsi[ctlr].ndevices; @@ -375,6 +380,12 @@ cciss_scsi_add_entry(int ctlr, int hostno, sd = &ccissscsi[ctlr].dev[n]; if (find_bus_target_lun(ctlr, &sd->bus, &sd->target, &sd->lun) != 0) return -1; + + added[*nadded].bus = sd->bus; + added[*nadded].target = sd->target; + added[*nadded].lun = sd->lun; + (*nadded)++; + memcpy(&sd->scsi3addr[0], scsi3addr, 8); sd->devtype = devtype; ccissscsi[ctlr].ndevices++; @@ -390,7 +401,8 @@ cciss_scsi_add_entry(int ctlr, int hostno, } static void -cciss_scsi_remove_entry(int ctlr, int hostno, int entry) +cciss_scsi_remove_entry(int ctlr, int hostno, int entry, + struct scsi2map *removed, int *nremoved) { /* assumes hba[ctlr]->scsi_ctlr->lock is held */ int i; @@ -398,6 +410,10 @@ cciss_scsi_remove_entry(int ctlr, int hostno, int entry) if (entry < 0 || entry >= CCISS_MAX_SCSI_DEVS_PER_HBA) return; sd = ccissscsi[ctlr].dev[entry]; + removed[*nremoved].bus = sd.bus; + removed[*nremoved].target = sd.target; + removed[*nremoved].lun = sd.lun; + (*nremoved)++; for (i=entry;iscsi_ctlr)->scsi_host; + /* find any devices in ccissscsi[] that are not in sd[] and remove them from ccissscsi[] */ i = 0; + nremoved = 0; + nadded = 0; while(idevtype), hostno, csd->bus, csd->target, csd->lun); */ - cciss_scsi_remove_entry(ctlr, hostno, i); - /* note, i not incremented */ + cciss_scsi_remove_entry(ctlr, hostno, i, + removed, &nremoved); + /* remove ^^^, hence i not incremented */ } else if (found == 1) { /* device is different kind */ changes++; @@ -464,8 +521,15 @@ adjust_cciss_scsi_table(int ctlr, int hostno, "(device type now %s).\n", ctlr, hostno, csd->bus, csd->target, csd->lun, scsi_device_type(csd->devtype)); + cciss_scsi_remove_entry(ctlr, hostno, i, + removed, &nremoved); + /* remove ^^^, hence i not incremented */ + if (cciss_scsi_add_entry(ctlr, hostno, + &sd[j].scsi3addr[0], sd[j].devtype, + added, &nadded) != 0) + /* we just removed one, so add can't fail. */ + BUG(); csd->devtype = sd[j].devtype; - i++; /* so just move along. */ } else /* device is same as it ever was, */ i++; /* so just move along. */ } @@ -489,7 +553,9 @@ adjust_cciss_scsi_table(int ctlr, int hostno, if (!found) { changes++; if (cciss_scsi_add_entry(ctlr, hostno, - &sd[i].scsi3addr[0], sd[i].devtype) != 0) + + &sd[i].scsi3addr[0], sd[i].devtype, + added, &nadded) != 0) break; } else if (found == 1) { /* should never happen... */ @@ -501,9 +567,50 @@ adjust_cciss_scsi_table(int ctlr, int hostno, } CPQ_TAPE_UNLOCK(ctlr, flags); - if (!changes) - printk("cciss%d: No device changes detected.\n", ctlr); + /* Don't notify scsi mid layer of any changes the first time through */ + /* (or if there are no changes) scsi_scan_host will do it later the */ + /* first time through. */ + if (hostno == -1 || !changes) + goto free_and_out; + + /* Notify scsi mid layer of any removed devices */ + for (i = 0; i < nremoved; i++) { + struct scsi_device *sdev = + scsi_device_lookup(sh, removed[i].bus, + removed[i].target, removed[i].lun); + if (sdev != NULL) { + scsi_remove_device(sdev); + scsi_device_put(sdev); + } else { + /* We don't expect to get here. */ + /* future cmds to this device will get selection */ + /* timeout as if the device was gone. */ + printk(KERN_WARNING "cciss%d: didn't find " + "c%db%dt%dl%d\n for removal.", + ctlr, hostno, removed[i].bus, + removed[i].target, removed[i].lun); + } + } + + /* Notify scsi mid layer of any added devices */ + for (i = 0; i < nadded; i++) { + int rc; + rc = scsi_add_device(sh, added[i].bus, + added[i].target, added[i].lun); + if (rc == 0) + continue; + printk(KERN_WARNING "cciss%d: scsi_add_device " + "c%db%dt%dl%d failed, device not added.\n", + ctlr, hostno, + added[i].bus, added[i].target, added[i].lun); + /* now we have to remove it from ccissscsi, */ + /* since it didn't get added to scsi mid layer */ + fixup_botched_add(ctlr, added[i].scsi3addr); + } +free_and_out: + kfree(added); + kfree(removed); return 0; } @@ -1354,32 +1461,6 @@ cciss_unregister_scsi(int ctlr) kfree(sa); } -static int -cciss_register_scsi(int ctlr) -{ - unsigned long flags; - - CPQ_TAPE_LOCK(ctlr, flags); - - /* Since this is really a block driver, the SCSI core may not be - initialized at init time, in which case, calling scsi_register_host - would hang. Instead, we do it later, via /proc filesystem - and rc scripts, when we know SCSI core is good to go. */ - - /* Only register if SCSI devices are detected. */ - if (ccissscsi[ctlr].ndevices != 0) { - ((struct cciss_scsi_adapter_data_t *) - hba[ctlr]->scsi_ctlr)->registered = 1; - CPQ_TAPE_UNLOCK(ctlr, flags); - return cciss_scsi_detect(ctlr); - } - CPQ_TAPE_UNLOCK(ctlr, flags); - printk(KERN_INFO - "cciss%d: No appropriate SCSI device detected, " - "SCSI subsystem not engaged.\n", ctlr); - return 0; -} - static int cciss_engage_scsi(int ctlr) { @@ -1391,15 +1472,15 @@ cciss_engage_scsi(int ctlr) sa = (struct cciss_scsi_adapter_data_t *) hba[ctlr]->scsi_ctlr; stk = &sa->cmd_stack; - if (((struct cciss_scsi_adapter_data_t *) - hba[ctlr]->scsi_ctlr)->registered) { + if (sa->registered) { printk("cciss%d: SCSI subsystem already engaged.\n", ctlr); spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); return ENXIO; } + sa->registered = 1; spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); cciss_update_non_disk_devices(ctlr, -1); - cciss_register_scsi(ctlr); + cciss_scsi_detect(ctlr); return 0; } @@ -1493,7 +1574,5 @@ static int cciss_eh_abort_handler(struct scsi_cmnd *scsicmd) /* If no tape support, then these become defined out of existence */ #define cciss_scsi_setup(cntl_num) -#define cciss_unregister_scsi(ctlr) -#define cciss_register_scsi(ctlr) #endif /* CONFIG_CISS_SCSI_TAPE */ -- GitLab From 935dc8d7575e6c1292b057e39045a40f1fbe26e7 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Mon, 4 Aug 2008 11:54:54 +0200 Subject: [PATCH 0872/1024] cciss: add support for multi lun tape devices This patch adds support for multi-lun devices in a SAS environment. It's required for the support of media changers. Signed-off-by: Stephen M. Cameron Signed-off-by: Mike Miller Signed-off-by: Jens Axboe --- drivers/block/cciss_scsi.c | 40 +++++++++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-) diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index c673ff14126..e1233aabda7 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -371,16 +371,50 @@ cciss_scsi_add_entry(int ctlr, int hostno, /* assumes hba[ctlr]->scsi_ctlr->lock is held */ int n = ccissscsi[ctlr].ndevices; struct cciss_scsi_dev_t *sd; + int i, bus, target, lun; + unsigned char addr1[8], addr2[8]; if (n >= CCISS_MAX_SCSI_DEVS_PER_HBA) { printk("cciss%d: Too many devices, " "some will be inaccessible.\n", ctlr); return -1; } - sd = &ccissscsi[ctlr].dev[n]; - if (find_bus_target_lun(ctlr, &sd->bus, &sd->target, &sd->lun) != 0) - return -1; + bus = target = -1; + lun = 0; + /* Is this device a non-zero lun of a multi-lun device */ + /* byte 4 of the 8-byte LUN addr will contain the logical unit no. */ + if (scsi3addr[4] != 0) { + /* Search through our list and find the device which */ + /* has the same 8 byte LUN address, excepting byte 4. */ + /* Assign the same bus and target for this new LUN. */ + /* Use the logical unit number from the firmware. */ + memcpy(addr1, scsi3addr, 8); + addr1[4] = 0; + for (i = 0; i < n; i++) { + sd = &ccissscsi[ctlr].dev[i]; + memcpy(addr2, sd->scsi3addr, 8); + addr2[4] = 0; + /* differ only in byte 4? */ + if (memcmp(addr1, addr2, 8) == 0) { + bus = sd->bus; + target = sd->target; + lun = scsi3addr[4]; + break; + } + } + } + + sd = &ccissscsi[ctlr].dev[n]; + if (lun == 0) { + if (find_bus_target_lun(ctlr, + &sd->bus, &sd->target, &sd->lun) != 0) + return -1; + } else { + sd->bus = bus; + sd->target = target; + sd->lun = lun; + } added[*nadded].bus = sd->bus; added[*nadded].target = sd->target; added[*nadded].lun = sd->lun; -- GitLab From ba198efb5ef4e5f4927a18ff95a58f40c58cbaa9 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Mon, 4 Aug 2008 11:54:55 +0200 Subject: [PATCH 0873/1024] cciss: fix bug if scsi tape support is disabled Bug fix. If SCSI tape support is turned off we get an implicit declaration of cciss_unregister_scsi error in cciss_remove_one. Signed-off-by: Mike Miller Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 9ffa821fbfd..b73116ef923 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -3614,7 +3614,9 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev) } } +#ifdef CONFIG_CISS_SCSI_TAPE cciss_unregister_scsi(i); /* unhook from SCSI subsystem */ +#endif cciss_shutdown(pdev); -- GitLab From 1ac0ae062cecd37587f5b951089f90e1d9d91769 Mon Sep 17 00:00:00 2001 From: Denis ChengRq Date: Mon, 4 Aug 2008 11:56:30 +0200 Subject: [PATCH 0874/1024] bio: make use of bvec_nr_vecs Since introduced in 7ba1ba12eee, it should be made use of. Signed-off-by: Denis ChengRq Signed-off-by: Jens Axboe --- fs/bio.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index 25f1af0d81e..8000e2fa16c 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -77,11 +77,8 @@ struct bio_vec *bvec_alloc_bs(gfp_t gfp_mask, int nr, unsigned long *idx, struct */ bvl = mempool_alloc(bs->bvec_pools[*idx], gfp_mask); - if (bvl) { - struct biovec_slab *bp = bvec_slabs + *idx; - - memset(bvl, 0, bp->nr_vecs * sizeof(struct bio_vec)); - } + if (bvl) + memset(bvl, 0, bvec_nr_vecs(*idx) * sizeof(struct bio_vec)); return bvl; } @@ -149,7 +146,7 @@ struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs) goto out; } bio->bi_flags |= idx << BIO_POOL_OFFSET; - bio->bi_max_vecs = bvec_slabs[idx].nr_vecs; + bio->bi_max_vecs = bvec_nr_vecs(idx); } bio->bi_io_vec = bvl; } -- GitLab From 62aa0054da220b8bbe6f23c0eb1d97a99005d0b3 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 4 Aug 2008 11:59:05 +0200 Subject: [PATCH 0875/1024] xen-blkfront.c: make blkif_ioctl() static This patch makes the needlessly global blkif_ioctl() static. Signed-off-by: Adrian Bunk Acked-by: Jeremy Fitzhardinge Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 9ae05c58423..3ca643cafcc 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -154,8 +154,8 @@ static int blkif_getgeo(struct block_device *bd, struct hd_geometry *hg) return 0; } -int blkif_ioctl(struct inode *inode, struct file *filep, - unsigned command, unsigned long argument) +static int blkif_ioctl(struct inode *inode, struct file *filep, + unsigned command, unsigned long argument) { struct blkfront_info *info = inode->i_bdev->bd_disk->private_data; -- GitLab From 9e74114d96bb5dbaa17b9292139b0c6205e0b971 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Tue, 15 Jul 2008 11:18:04 +0000 Subject: [PATCH 0876/1024] [WATCHDOG] hpwdt.c - fix double includes The last clean-up created 2 times the same include. delete the doubles. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index d20f591e3fd..7ea8f3e844f 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -39,9 +39,7 @@ #include #include #include -#include #include -#include #define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */ #define CRU_BIOS_SIGNATURE_VALUE 0x55524324 -- GitLab From 089ab0791d127e8ada526c4b4d18b7584be8acf0 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Tue, 15 Jul 2008 11:46:11 +0000 Subject: [PATCH 0877/1024] [WATCHDOG] Clean-up includes Use #include instead of Use #include instead of Clean-up includes. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/acquirewdt.c | 1 - drivers/watchdog/advantechwdt.c | 4 ++-- drivers/watchdog/alim1535_wdt.c | 1 - drivers/watchdog/alim7101_wdt.c | 2 +- drivers/watchdog/bfin_wdt.c | 2 +- drivers/watchdog/geodewdt.c | 2 +- drivers/watchdog/iTCO_vendor_support.c | 1 - drivers/watchdog/ib700wdt.c | 2 +- drivers/watchdog/ixp4xx_wdt.c | 2 +- drivers/watchdog/mv64x60_wdt.c | 1 - drivers/watchdog/omap_wdt.c | 3 +-- drivers/watchdog/pcwd_pci.c | 5 ++--- drivers/watchdog/pcwd_usb.c | 3 +-- drivers/watchdog/pnx4008_wdt.c | 4 ++-- 14 files changed, 13 insertions(+), 20 deletions(-) diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c index 269ada2f1fc..28d9057c9be 100644 --- a/drivers/watchdog/acquirewdt.c +++ b/drivers/watchdog/acquirewdt.c @@ -65,7 +65,6 @@ #include /* For io-port access */ #include /* For platform_driver framework */ #include /* For __init/__exit/... */ - #include /* For copy_to_user/put_user/... */ #include /* For inb/outb/... */ diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c index 220d238ee42..e6bf8d2d3d3 100644 --- a/drivers/watchdog/advantechwdt.c +++ b/drivers/watchdog/advantechwdt.c @@ -37,9 +37,9 @@ #include #include #include +#include +#include -#include -#include #include #define DRV_NAME "advantechwdt" diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c index 88760cb5ec1..80e323ddc4b 100644 --- a/drivers/watchdog/alim1535_wdt.c +++ b/drivers/watchdog/alim1535_wdt.c @@ -18,7 +18,6 @@ #include #include #include - #include #include diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c index c495f36c6aa..726e75d9db7 100644 --- a/drivers/watchdog/alim7101_wdt.c +++ b/drivers/watchdog/alim7101_wdt.c @@ -31,9 +31,9 @@ #include #include #include - #include #include + #include #define OUR_NAME "alim7101_wdt" diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index 2b92818cc66..8f6e871b3fe 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -24,8 +24,8 @@ #include #include #include -#include #include +#include #define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args) #define stampit() stamp("here i am") diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index 30d09cbbad9..a41f57ce581 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -17,8 +17,8 @@ #include #include #include +#include -#include #include #define GEODEWDT_HZ 500 diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index 09e9534ac2e..e9e1f7b3fb7 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -31,7 +31,6 @@ #include /* For printk/panic/... */ #include /* For __init/__exit/... */ #include /* For io-port access */ - #include /* For inb/outb/... */ #include "iTCO_vendor.h" diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c index 805a54b02aa..9eb9537c370 100644 --- a/drivers/watchdog/ib700wdt.c +++ b/drivers/watchdog/ib700wdt.c @@ -41,9 +41,9 @@ #include #include #include - #include #include + #include static struct platform_device *ibwdt_platform_device; diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c index 24e624c847a..1bafd7b58ca 100644 --- a/drivers/watchdog/ixp4xx_wdt.c +++ b/drivers/watchdog/ixp4xx_wdt.c @@ -22,9 +22,9 @@ #include #include #include +#include #include -#include static int nowayout = WATCHDOG_NOWAYOUT; static int heartbeat = 60; /* (secs) Default is 1 minute */ diff --git a/drivers/watchdog/mv64x60_wdt.c b/drivers/watchdog/mv64x60_wdt.c index ac09fe4d957..acf589dc057 100644 --- a/drivers/watchdog/mv64x60_wdt.c +++ b/drivers/watchdog/mv64x60_wdt.c @@ -22,7 +22,6 @@ #include #include #include - #include #include #include diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index ccdf069792d..5aae071cc04 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -40,8 +40,7 @@ #include #include #include - -#include +#include #include #include diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c index 61a89e95964..a1d31d1f750 100644 --- a/drivers/watchdog/pcwd_pci.c +++ b/drivers/watchdog/pcwd_pci.c @@ -46,9 +46,8 @@ #include /* For pci functions */ #include /* For io-port access */ #include /* For spin_lock/spin_unlock/... */ - -#include /* For copy_to_user/put_user/... */ -#include /* For inb/outb/... */ +#include /* For copy_to_user/put_user/... */ +#include /* For inb/outb/... */ /* Module and version information */ #define WATCHDOG_VERSION "1.03" diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index bf443d077a1..825102a3391 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -40,8 +40,7 @@ #include /* For kmalloc, ... */ #include /* For mutex locking */ #include /* For HID_REQ_SET_REPORT & HID_DT_REPORT */ - -#include /* For copy_to_user/put_user/... */ +#include /* For copy_to_user/put_user/... */ #ifdef CONFIG_USB_DEBUG diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 8cd0d53941e..56dee3bfd4a 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -28,11 +28,11 @@ #include #include #include - -#include #include #include +#include + #define MODULE_NAME "PNX4008-WDT: " /* WatchDog Timer - Chapter 23 Page 207 */ -- GitLab From c9488520512df659ad21df5d100b52fed96bdf07 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 3 Jul 2008 23:51:32 -0700 Subject: [PATCH 0878/1024] [WATCHDOG] pcwd: a couple of watchdogs escaped conversion Fix them up. Once we know the long term plan the watchdogs can all get shrunk massively anyway Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/pcwd_pci.c | 8 +++----- drivers/watchdog/pcwd_usb.c | 6 +++--- 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c index a1d31d1f750..67d90810c6e 100644 --- a/drivers/watchdog/pcwd_pci.c +++ b/drivers/watchdog/pcwd_pci.c @@ -454,8 +454,8 @@ static ssize_t pcipcwd_write(struct file *file, const char __user *data, return len; } -static int pcipcwd_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long pcipcwd_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -477,9 +477,7 @@ static int pcipcwd_ioctl(struct inode *inode, struct file *file, case WDIOC_GETSTATUS: { int status; - pcipcwd_get_status(&status); - return put_user(status, p); } @@ -643,7 +641,7 @@ static const struct file_operations pcipcwd_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = pcipcwd_write, - .ioctl = pcipcwd_ioctl, + .unlocked_ioctl = pcipcwd_ioctl, .open = pcipcwd_open, .release = pcipcwd_release, }; diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index 825102a3391..bc399cf65cf 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -368,8 +368,8 @@ static ssize_t usb_pcwd_write(struct file *file, const char __user *data, return len; } -static int usb_pcwd_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long usb_pcwd_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -534,7 +534,7 @@ static const struct file_operations usb_pcwd_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = usb_pcwd_write, - .ioctl = usb_pcwd_ioctl, + .unlocked_ioctl = usb_pcwd_ioctl, .open = usb_pcwd_open, .release = usb_pcwd_release, }; -- GitLab From ef8ab12ec2d663f9b146c920a4dd589a7e767f2d Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 3 Jul 2008 23:51:32 -0700 Subject: [PATCH 0879/1024] [WATCHDOG] mpc83xx_wdt: convert to the OF platform driver This patch simply converts mpc83xx_wdt to the OF platform driver so we can directly work with the device tree without passing various stuff through platform data. Signed-off-by: Anton Vorontsov Acked-by: Stephen Rothwell Cc: Kumar Gala Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/mpc83xx_wdt.c | 61 +++++++++++++++++----------------- 1 file changed, 30 insertions(+), 31 deletions(-) diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c index 109eea0df2d..5f1b7bff8f1 100644 --- a/drivers/watchdog/mpc83xx_wdt.c +++ b/drivers/watchdog/mpc83xx_wdt.c @@ -19,11 +19,12 @@ #include #include #include -#include +#include #include #include #include #include +#include struct mpc83xx_wdt { __be32 res0; @@ -149,52 +150,42 @@ static struct miscdevice mpc83xx_wdt_miscdev = { .fops = &mpc83xx_wdt_fops, }; -static int __devinit mpc83xx_wdt_probe(struct platform_device *dev) +static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, + const struct of_device_id *match) { - struct resource *r; int ret; - unsigned int *freq = dev->dev.platform_data; + u32 freq = fsl_get_sys_freq(); - /* get a pointer to the register memory */ - r = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!freq || freq == -1) + return -EINVAL; - if (!r) { - ret = -ENODEV; - goto err_out; - } - - wd_base = ioremap(r->start, sizeof(struct mpc83xx_wdt)); - if (wd_base == NULL) { - ret = -ENOMEM; - goto err_out; - } + wd_base = of_iomap(ofdev->node, 0); + if (!wd_base) + return -ENOMEM; ret = misc_register(&mpc83xx_wdt_miscdev); if (ret) { - printk(KERN_ERR "cannot register miscdev on minor=%d " - "(err=%d)\n", - WATCHDOG_MINOR, ret); + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); goto err_unmap; } /* Calculate the timeout in seconds */ if (prescale) - timeout_sec = (timeout * 0x10000) / (*freq); + timeout_sec = (timeout * 0x10000) / freq; else - timeout_sec = timeout / (*freq); + timeout_sec = timeout / freq; - printk(KERN_INFO "WDT driver for MPC83xx initialized. " - "mode:%s timeout=%d (%d seconds)\n", - reset ? "reset":"interrupt", timeout, timeout_sec); + pr_info("WDT driver for MPC83xx initialized. mode:%s timeout=%d " + "(%d seconds)\n", reset ? "reset" : "interrupt", timeout, + timeout_sec); return 0; - err_unmap: iounmap(wd_base); -err_out: return ret; } -static int __devexit mpc83xx_wdt_remove(struct platform_device *dev) +static int __devexit mpc83xx_wdt_remove(struct of_device *ofdev) { misc_deregister(&mpc83xx_wdt_miscdev); iounmap(wd_base); @@ -202,7 +193,16 @@ static int __devexit mpc83xx_wdt_remove(struct platform_device *dev) return 0; } -static struct platform_driver mpc83xx_wdt_driver = { +static const struct of_device_id mpc83xx_wdt_match[] = { + { + .compatible = "mpc83xx_wdt", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, mpc83xx_wdt_match); + +static struct of_platform_driver mpc83xx_wdt_driver = { + .match_table = mpc83xx_wdt_match, .probe = mpc83xx_wdt_probe, .remove = __devexit_p(mpc83xx_wdt_remove), .driver = { @@ -213,12 +213,12 @@ static struct platform_driver mpc83xx_wdt_driver = { static int __init mpc83xx_wdt_init(void) { - return platform_driver_register(&mpc83xx_wdt_driver); + return of_register_platform_driver(&mpc83xx_wdt_driver); } static void __exit mpc83xx_wdt_exit(void) { - platform_driver_unregister(&mpc83xx_wdt_driver); + of_unregister_platform_driver(&mpc83xx_wdt_driver); } module_init(mpc83xx_wdt_init); @@ -228,4 +228,3 @@ MODULE_AUTHOR("Dave Updegraff, Kumar Gala"); MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx uProcessor"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -MODULE_ALIAS("platform:mpc83xx_wdt"); -- GitLab From 500c919e3d699644cc9d6c1e93022481baafd8e1 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 3 Jul 2008 23:51:34 -0700 Subject: [PATCH 0880/1024] [WATCHDOG] mpc83xx_wdt: add support for MPC86xx CPUs On MPC86xx the watchdog could be enabled only at power-on-reset, and could not be disabled afterwards. We must ping the watchdog from the kernel until the userspace handles it. MPC83xx CPUs are only differ in a way that watchdog could be disabled once, but after it was enabled via software it becomes just the same as MPC86xx. Thus, to support MPC86xx I added the kernel timer which pings the watchdog until the userspace opens it. Since we implemented the timer, now we're able to implement proper handling for the CONFIG_WATCHDOG_NOWAYOUT case, for MPC83xx and MPC86xx. Also move the probe code into subsys_initcall, because we want start pinging the watchdog ASAP, and misc devices are available in subsys_initcall. Signed-off-by: Anton Vorontsov Cc: Kumar Gala Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/Kconfig | 4 +- drivers/watchdog/mpc83xx_wdt.c | 80 ++++++++++++++++++++++++++++++---- 2 files changed, 74 insertions(+), 10 deletions(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 48399e134c0..93329620f44 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -696,8 +696,8 @@ config 8xx_WDT depends on 8xx config 83xx_WDT - tristate "MPC83xx Watchdog Timer" - depends on PPC_83xx + tristate "MPC83xx/MPC86xx Watchdog Timer" + depends on PPC_83xx || PPC_86xx config MV64X60_WDT tristate "MV64X60 (Marvell Discovery) Watchdog Timer" diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc83xx_wdt.c index 5f1b7bff8f1..fa82ec99ba8 100644 --- a/drivers/watchdog/mpc83xx_wdt.c +++ b/drivers/watchdog/mpc83xx_wdt.c @@ -1,10 +1,12 @@ /* - * mpc83xx_wdt.c - MPC83xx watchdog userspace interface + * mpc83xx_wdt.c - MPC83xx/MPC86xx watchdog userspace interface * * Authors: Dave Updegraff * Kumar Gala * Attribution: from 83xx_wst: Florian Schirmer * ..and from sc520_wdt + * Copyright (c) 2008 MontaVista Software, Inc. + * Anton Vorontsov * * Note: it appears that you can only actually ENABLE or DISABLE the thing * once after POR. Once enabled, you cannot disable, and vice versa. @@ -18,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -39,6 +42,11 @@ struct mpc83xx_wdt { u8 res2[0xF0]; }; +struct mpc83xx_wdt_type { + int prescaler; + bool hw_enabled; +}; + static struct mpc83xx_wdt __iomem *wd_base; static u16 timeout = 0xffff; @@ -51,6 +59,11 @@ module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset"); +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + /* * We always prescale, but if someone really doesn't want to they can set this * to 0 @@ -70,6 +83,22 @@ static void mpc83xx_wdt_keepalive(void) spin_unlock(&wdt_spinlock); } +static void mpc83xx_wdt_timer_ping(unsigned long arg); +static DEFINE_TIMER(wdt_timer, mpc83xx_wdt_timer_ping, 0, 0); + +static void mpc83xx_wdt_timer_ping(unsigned long arg) +{ + mpc83xx_wdt_keepalive(); + /* We're pinging it twice faster than needed, just to be sure. */ + mod_timer(&wdt_timer, jiffies + HZ * timeout_sec / 2); +} + +static void mpc83xx_wdt_pr_warn(const char *msg) +{ + pr_crit("mpc83xx_wdt: %s, expect the %s soon!\n", msg, + reset ? "reset" : "machine check exception"); +} + static ssize_t mpc83xx_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { @@ -85,7 +114,8 @@ static int mpc83xx_wdt_open(struct inode *inode, struct file *file) return -EBUSY; /* Once we start the watchdog we can't stop it */ - __module_get(THIS_MODULE); + if (nowayout) + __module_get(THIS_MODULE); /* Good, fire up the show */ if (prescale) @@ -97,13 +127,17 @@ static int mpc83xx_wdt_open(struct inode *inode, struct file *file) out_be32(&wd_base->swcrr, tmp); + del_timer_sync(&wdt_timer); + return nonseekable_open(inode, file); } static int mpc83xx_wdt_release(struct inode *inode, struct file *file) { - printk(KERN_CRIT "Unexpected close, not stopping watchdog!\n"); - mpc83xx_wdt_keepalive(); + if (!nowayout) + mpc83xx_wdt_timer_ping(0); + else + mpc83xx_wdt_pr_warn("watchdog closed"); clear_bit(0, &wdt_is_open); return 0; } @@ -154,15 +188,25 @@ static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, const struct of_device_id *match) { int ret; + struct device_node *np = ofdev->node; + struct mpc83xx_wdt_type *wdt_type = match->data; u32 freq = fsl_get_sys_freq(); + bool enabled; if (!freq || freq == -1) return -EINVAL; - wd_base = of_iomap(ofdev->node, 0); + wd_base = of_iomap(np, 0); if (!wd_base) return -ENOMEM; + enabled = in_be32(&wd_base->swcrr) & SWCRR_SWEN; + if (!enabled && wdt_type->hw_enabled) { + pr_info("mpc83xx_wdt: could not be enabled in software\n"); + ret = -ENOSYS; + goto err_unmap; + } + ret = misc_register(&mpc83xx_wdt_miscdev); if (ret) { pr_err("cannot register miscdev on minor=%d (err=%d)\n", @@ -172,13 +216,21 @@ static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, /* Calculate the timeout in seconds */ if (prescale) - timeout_sec = (timeout * 0x10000) / freq; + timeout_sec = (timeout * wdt_type->prescaler) / freq; else timeout_sec = timeout / freq; pr_info("WDT driver for MPC83xx initialized. mode:%s timeout=%d " "(%d seconds)\n", reset ? "reset" : "interrupt", timeout, timeout_sec); + + /* + * If the watchdog was previously enabled or we're running on + * MPC86xx, we should ping the wdt from the kernel until the + * userspace handles it. + */ + if (enabled) + mpc83xx_wdt_timer_ping(0); return 0; err_unmap: iounmap(wd_base); @@ -187,6 +239,8 @@ err_unmap: static int __devexit mpc83xx_wdt_remove(struct of_device *ofdev) { + mpc83xx_wdt_pr_warn("watchdog removed"); + del_timer_sync(&wdt_timer); misc_deregister(&mpc83xx_wdt_miscdev); iounmap(wd_base); @@ -196,6 +250,16 @@ static int __devexit mpc83xx_wdt_remove(struct of_device *ofdev) static const struct of_device_id mpc83xx_wdt_match[] = { { .compatible = "mpc83xx_wdt", + .data = &(struct mpc83xx_wdt_type) { + .prescaler = 0x10000, + }, + }, + { + .compatible = "fsl,mpc8610-wdt", + .data = &(struct mpc83xx_wdt_type) { + .prescaler = 0x10000, + .hw_enabled = true, + }, }, {}, }; @@ -221,10 +285,10 @@ static void __exit mpc83xx_wdt_exit(void) of_unregister_platform_driver(&mpc83xx_wdt_driver); } -module_init(mpc83xx_wdt_init); +subsys_initcall(mpc83xx_wdt_init); module_exit(mpc83xx_wdt_exit); MODULE_AUTHOR("Dave Updegraff, Kumar Gala"); -MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx uProcessor"); +MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx/MPC86xx uProcessors"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- GitLab From 28acd02f9f9efe44718de3bbe8be22d6dfb7e47f Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 3 Jul 2008 23:51:34 -0700 Subject: [PATCH 0881/1024] [WATCHDOG] mpc83xx_wdt: rename to mpc8xxx_wdt Rename the driver because now we support some MPC86xx processors. There are no changes to the mpc83xx_wdt.c file, yet. When possible, we do file renames and changes separately (because Linus once asked so, because it helps git to track the renamed files). Signed-off-by: Anton Vorontsov Cc: Kumar Gala Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/Kconfig | 11 +++++++++-- drivers/watchdog/Makefile | 2 +- drivers/watchdog/{mpc83xx_wdt.c => mpc8xxx_wdt.c} | 0 3 files changed, 10 insertions(+), 3 deletions(-) rename drivers/watchdog/{mpc83xx_wdt.c => mpc8xxx_wdt.c} (100%) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 93329620f44..01e33e80eac 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -695,9 +695,16 @@ config 8xx_WDT tristate "MPC8xx Watchdog Timer" depends on 8xx -config 83xx_WDT - tristate "MPC83xx/MPC86xx Watchdog Timer" +config 8xxx_WDT + tristate "MPC8xxx Platform Watchdog Timer" depends on PPC_83xx || PPC_86xx + help + This driver is for a SoC level watchdog that exists on some + Freescale PowerPC processors. So far this driver supports: + - MPC83xx watchdogs + - MPC86xx watchdogs + + For BookE processors (MPC85xx) use the BOOKE_WDT driver instead. config MV64X60_WDT tristate "MV64X60 (Marvell Discovery) Watchdog Timer" diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index edd305a64e6..cdd674ffaa2 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -103,7 +103,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o # POWERPC Architecture obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o obj-$(CONFIG_MPC5200_WDT) += mpc5200_wdt.o -obj-$(CONFIG_83xx_WDT) += mpc83xx_wdt.o +obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o diff --git a/drivers/watchdog/mpc83xx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c similarity index 100% rename from drivers/watchdog/mpc83xx_wdt.c rename to drivers/watchdog/mpc8xxx_wdt.c -- GitLab From 59ca1b0d14ca71bdefef372ccd5035341e0ca091 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 3 Jul 2008 23:51:35 -0700 Subject: [PATCH 0882/1024] [WATCHDOG] mpc8xxx_wdt: various renames, mostly s/mpc83xx/mpc8xxx/g mpc83xx_wdt.c renamed to mpc8xxx_wdt.c, now we can do various renames in the file itself. Signed-off-by: Anton Vorontsov Cc: Kumar Gala Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/mpc8xxx_wdt.c | 104 ++++++++++++++++----------------- 1 file changed, 52 insertions(+), 52 deletions(-) diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c index fa82ec99ba8..8b82b91caee 100644 --- a/drivers/watchdog/mpc8xxx_wdt.c +++ b/drivers/watchdog/mpc8xxx_wdt.c @@ -1,5 +1,5 @@ /* - * mpc83xx_wdt.c - MPC83xx/MPC86xx watchdog userspace interface + * mpc8xxx_wdt.c - MPC83xx/MPC86xx watchdog userspace interface * * Authors: Dave Updegraff * Kumar Gala @@ -29,7 +29,7 @@ #include #include -struct mpc83xx_wdt { +struct mpc8xxx_wdt { __be32 res0; __be32 swcrr; /* System watchdog control register */ #define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count. */ @@ -42,12 +42,12 @@ struct mpc83xx_wdt { u8 res2[0xF0]; }; -struct mpc83xx_wdt_type { +struct mpc8xxx_wdt_type { int prescaler; bool hw_enabled; }; -static struct mpc83xx_wdt __iomem *wd_base; +static struct mpc8xxx_wdt __iomem *wd_base; static u16 timeout = 0xffff; module_param(timeout, ushort, 0); @@ -74,7 +74,7 @@ static unsigned int timeout_sec; static unsigned long wdt_is_open; static DEFINE_SPINLOCK(wdt_spinlock); -static void mpc83xx_wdt_keepalive(void) +static void mpc8xxx_wdt_keepalive(void) { /* Ping the WDT */ spin_lock(&wdt_spinlock); @@ -83,31 +83,31 @@ static void mpc83xx_wdt_keepalive(void) spin_unlock(&wdt_spinlock); } -static void mpc83xx_wdt_timer_ping(unsigned long arg); -static DEFINE_TIMER(wdt_timer, mpc83xx_wdt_timer_ping, 0, 0); +static void mpc8xxx_wdt_timer_ping(unsigned long arg); +static DEFINE_TIMER(wdt_timer, mpc8xxx_wdt_timer_ping, 0, 0); -static void mpc83xx_wdt_timer_ping(unsigned long arg) +static void mpc8xxx_wdt_timer_ping(unsigned long arg) { - mpc83xx_wdt_keepalive(); + mpc8xxx_wdt_keepalive(); /* We're pinging it twice faster than needed, just to be sure. */ mod_timer(&wdt_timer, jiffies + HZ * timeout_sec / 2); } -static void mpc83xx_wdt_pr_warn(const char *msg) +static void mpc8xxx_wdt_pr_warn(const char *msg) { - pr_crit("mpc83xx_wdt: %s, expect the %s soon!\n", msg, + pr_crit("mpc8xxx_wdt: %s, expect the %s soon!\n", msg, reset ? "reset" : "machine check exception"); } -static ssize_t mpc83xx_wdt_write(struct file *file, const char __user *buf, +static ssize_t mpc8xxx_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { if (count) - mpc83xx_wdt_keepalive(); + mpc8xxx_wdt_keepalive(); return count; } -static int mpc83xx_wdt_open(struct inode *inode, struct file *file) +static int mpc8xxx_wdt_open(struct inode *inode, struct file *file) { u32 tmp = SWCRR_SWEN; if (test_and_set_bit(0, &wdt_is_open)) @@ -132,17 +132,17 @@ static int mpc83xx_wdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static int mpc83xx_wdt_release(struct inode *inode, struct file *file) +static int mpc8xxx_wdt_release(struct inode *inode, struct file *file) { if (!nowayout) - mpc83xx_wdt_timer_ping(0); + mpc8xxx_wdt_timer_ping(0); else - mpc83xx_wdt_pr_warn("watchdog closed"); + mpc8xxx_wdt_pr_warn("watchdog closed"); clear_bit(0, &wdt_is_open); return 0; } -static long mpc83xx_wdt_ioctl(struct file *file, unsigned int cmd, +static long mpc8xxx_wdt_ioctl(struct inode *inode, struct file *file, unsigned long arg) { void __user *argp = (void __user *)arg; @@ -150,7 +150,7 @@ static long mpc83xx_wdt_ioctl(struct file *file, unsigned int cmd, static struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING, .firmware_version = 1, - .identity = "MPC83xx", + .identity = "MPC8xxx", }; switch (cmd) { @@ -160,7 +160,7 @@ static long mpc83xx_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETBOOTSTATUS: return put_user(0, p); case WDIOC_KEEPALIVE: - mpc83xx_wdt_keepalive(); + mpc8xxx_wdt_keepalive(); return 0; case WDIOC_GETTIMEOUT: return put_user(timeout_sec, p); @@ -169,27 +169,27 @@ static long mpc83xx_wdt_ioctl(struct file *file, unsigned int cmd, } } -static const struct file_operations mpc83xx_wdt_fops = { +static const struct file_operations mpc8xxx_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .write = mpc83xx_wdt_write, - .unlocked_ioctl = mpc83xx_wdt_ioctl, - .open = mpc83xx_wdt_open, - .release = mpc83xx_wdt_release, + .write = mpc8xxx_wdt_write, + .unlocked_ioctl = mpc8xxx_wdt_ioctl, + .open = mpc8xxx_wdt_open, + .release = mpc8xxx_wdt_release, }; -static struct miscdevice mpc83xx_wdt_miscdev = { +static struct miscdevice mpc8xxx_wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", - .fops = &mpc83xx_wdt_fops, + .fops = &mpc8xxx_wdt_fops, }; -static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, +static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev, const struct of_device_id *match) { int ret; struct device_node *np = ofdev->node; - struct mpc83xx_wdt_type *wdt_type = match->data; + struct mpc8xxx_wdt_type *wdt_type = match->data; u32 freq = fsl_get_sys_freq(); bool enabled; @@ -202,12 +202,12 @@ static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, enabled = in_be32(&wd_base->swcrr) & SWCRR_SWEN; if (!enabled && wdt_type->hw_enabled) { - pr_info("mpc83xx_wdt: could not be enabled in software\n"); + pr_info("mpc8xxx_wdt: could not be enabled in software\n"); ret = -ENOSYS; goto err_unmap; } - ret = misc_register(&mpc83xx_wdt_miscdev); + ret = misc_register(&mpc8xxx_wdt_miscdev); if (ret) { pr_err("cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, ret); @@ -220,73 +220,73 @@ static int __devinit mpc83xx_wdt_probe(struct of_device *ofdev, else timeout_sec = timeout / freq; - pr_info("WDT driver for MPC83xx initialized. mode:%s timeout=%d " + pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d " "(%d seconds)\n", reset ? "reset" : "interrupt", timeout, timeout_sec); /* * If the watchdog was previously enabled or we're running on - * MPC86xx, we should ping the wdt from the kernel until the + * MPC8xxx, we should ping the wdt from the kernel until the * userspace handles it. */ if (enabled) - mpc83xx_wdt_timer_ping(0); + mpc8xxx_wdt_timer_ping(0); return 0; err_unmap: iounmap(wd_base); return ret; } -static int __devexit mpc83xx_wdt_remove(struct of_device *ofdev) +static int __devexit mpc8xxx_wdt_remove(struct of_device *ofdev) { - mpc83xx_wdt_pr_warn("watchdog removed"); + mpc8xxx_wdt_pr_warn("watchdog removed"); del_timer_sync(&wdt_timer); - misc_deregister(&mpc83xx_wdt_miscdev); + misc_deregister(&mpc8xxx_wdt_miscdev); iounmap(wd_base); return 0; } -static const struct of_device_id mpc83xx_wdt_match[] = { +static const struct of_device_id mpc8xxx_wdt_match[] = { { .compatible = "mpc83xx_wdt", - .data = &(struct mpc83xx_wdt_type) { + .data = &(struct mpc8xxx_wdt_type) { .prescaler = 0x10000, }, }, { .compatible = "fsl,mpc8610-wdt", - .data = &(struct mpc83xx_wdt_type) { + .data = &(struct mpc8xxx_wdt_type) { .prescaler = 0x10000, .hw_enabled = true, }, }, {}, }; -MODULE_DEVICE_TABLE(of, mpc83xx_wdt_match); +MODULE_DEVICE_TABLE(of, mpc8xxx_wdt_match); -static struct of_platform_driver mpc83xx_wdt_driver = { - .match_table = mpc83xx_wdt_match, - .probe = mpc83xx_wdt_probe, - .remove = __devexit_p(mpc83xx_wdt_remove), +static struct of_platform_driver mpc8xxx_wdt_driver = { + .match_table = mpc8xxx_wdt_match, + .probe = mpc8xxx_wdt_probe, + .remove = __devexit_p(mpc8xxx_wdt_remove), .driver = { - .name = "mpc83xx_wdt", + .name = "mpc8xxx_wdt", .owner = THIS_MODULE, }, }; -static int __init mpc83xx_wdt_init(void) +static int __init mpc8xxx_wdt_init(void) { - return of_register_platform_driver(&mpc83xx_wdt_driver); + return of_register_platform_driver(&mpc8xxx_wdt_driver); } -static void __exit mpc83xx_wdt_exit(void) +static void __exit mpc8xxx_wdt_exit(void) { - of_unregister_platform_driver(&mpc83xx_wdt_driver); + of_unregister_platform_driver(&mpc8xxx_wdt_driver); } -subsys_initcall(mpc83xx_wdt_init); -module_exit(mpc83xx_wdt_exit); +subsys_initcall(mpc8xxx_wdt_init); +module_exit(mpc8xxx_wdt_exit); MODULE_AUTHOR("Dave Updegraff, Kumar Gala"); MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx/MPC86xx uProcessors"); -- GitLab From cb55d282a0d2156e7d40ee81726ab16b569e96d7 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 3 Jul 2008 23:51:36 -0700 Subject: [PATCH 0883/1024] [WATCHDOG] mpc8xxx_wdt: fix build CC drivers/watchdog/mpc8xxx_wdt.o drivers/watchdog/mpc8xxx_wdt.c: In function 'mpc8xxx_wdt_ioctl': drivers/watchdog/mpc8xxx_wdt.c:156: error: 'cmd' undeclared (first use in this function) drivers/watchdog/mpc8xxx_wdt.c:156: error: (Each undeclared identifier is reported only once drivers/watchdog/mpc8xxx_wdt.c:156: error: for each function it appears in.) drivers/watchdog/mpc8xxx_wdt.c: At top level: drivers/watchdog/mpc8xxx_wdt.c:176: warning: initialization from incompatible pointer type This patch ought to be folded into mpc8xxx_wdt-various-renames-mostly-s-mpc83xx-mpc8xxx-g.patch Signed-off-by: Anton Vorontsov Cc: Kumar Gala Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/mpc8xxx_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c index 8b82b91caee..3c5ed9e2622 100644 --- a/drivers/watchdog/mpc8xxx_wdt.c +++ b/drivers/watchdog/mpc8xxx_wdt.c @@ -142,7 +142,7 @@ static int mpc8xxx_wdt_release(struct inode *inode, struct file *file) return 0; } -static long mpc8xxx_wdt_ioctl(struct inode *inode, struct file *file, +static long mpc8xxx_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; -- GitLab From 0d7b101404f7bedcf3f448c1667c3744551cd9ee Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 3 Jul 2008 23:51:36 -0700 Subject: [PATCH 0884/1024] [WATCHDOG] mpc8xxx_wdt: add support for MPC8xx watchdogs The mpc8xxx_wdt driver is using two registers: SWSRR to push magic numbers, and SWCRR to control the watchdog. Both registers are available on the MPC8xx, and seem to have the same offsets and semantics as in MPC83xx/MPC86xx watchdogs. The only difference is prescale value. So this driver simply works on the MPC8xx CPUs. One quirk is needed for the MPC8xx, though. It has small prescale value and slow CPU, so the watchdog resets board prior to the driver has time to load. To solve this we should split initialization in two steps: start ping the watchdog early, and register the watchdog userspace interface later. MPC823 seem to be the first CPU in MPC8xx line, so we use fsl,mpc823-wdt compatible matching. Signed-off-by: Anton Vorontsov Tested-by: Jochen Friedrich Cc: Kumar Gala Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton --- drivers/watchdog/Kconfig | 3 ++- drivers/watchdog/mpc8xxx_wdt.c | 44 +++++++++++++++++++++++++--------- 2 files changed, 35 insertions(+), 12 deletions(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 01e33e80eac..50d44b4b466 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -697,10 +697,11 @@ config 8xx_WDT config 8xxx_WDT tristate "MPC8xxx Platform Watchdog Timer" - depends on PPC_83xx || PPC_86xx + depends on PPC_8xx || PPC_83xx || PPC_86xx help This driver is for a SoC level watchdog that exists on some Freescale PowerPC processors. So far this driver supports: + - MPC8xx watchdogs - MPC83xx watchdogs - MPC86xx watchdogs diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c index 3c5ed9e2622..f2094960e66 100644 --- a/drivers/watchdog/mpc8xxx_wdt.c +++ b/drivers/watchdog/mpc8xxx_wdt.c @@ -1,5 +1,5 @@ /* - * mpc8xxx_wdt.c - MPC83xx/MPC86xx watchdog userspace interface + * mpc8xxx_wdt.c - MPC8xx/MPC83xx/MPC86xx watchdog userspace interface * * Authors: Dave Updegraff * Kumar Gala @@ -207,13 +207,6 @@ static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev, goto err_unmap; } - ret = misc_register(&mpc8xxx_wdt_miscdev); - if (ret) { - pr_err("cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); - goto err_unmap; - } - /* Calculate the timeout in seconds */ if (prescale) timeout_sec = (timeout * wdt_type->prescaler) / freq; @@ -234,6 +227,7 @@ static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev, return 0; err_unmap: iounmap(wd_base); + wd_base = NULL; return ret; } @@ -261,6 +255,12 @@ static const struct of_device_id mpc8xxx_wdt_match[] = { .hw_enabled = true, }, }, + { + .compatible = "fsl,mpc823-wdt", + .data = &(struct mpc8xxx_wdt_type) { + .prescaler = 0x800, + }, + }, {}, }; MODULE_DEVICE_TABLE(of, mpc8xxx_wdt_match); @@ -275,20 +275,42 @@ static struct of_platform_driver mpc8xxx_wdt_driver = { }, }; +/* + * We do wdt initialization in two steps: arch_initcall probes the wdt + * very early to start pinging the watchdog (misc devices are not yet + * available), and later module_init() just registers the misc device. + */ +static int __init mpc8xxx_wdt_init_late(void) +{ + int ret; + + if (!wd_base) + return -ENODEV; + + ret = misc_register(&mpc8xxx_wdt_miscdev); + if (ret) { + pr_err("cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + return ret; + } + return 0; +} +module_init(mpc8xxx_wdt_init_late); + static int __init mpc8xxx_wdt_init(void) { return of_register_platform_driver(&mpc8xxx_wdt_driver); } +arch_initcall(mpc8xxx_wdt_init); static void __exit mpc8xxx_wdt_exit(void) { of_unregister_platform_driver(&mpc8xxx_wdt_driver); } - -subsys_initcall(mpc8xxx_wdt_init); module_exit(mpc8xxx_wdt_exit); MODULE_AUTHOR("Dave Updegraff, Kumar Gala"); -MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx/MPC86xx uProcessors"); +MODULE_DESCRIPTION("Driver for watchdog timer in MPC8xx/MPC83xx/MPC86xx " + "uProcessors"); MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- GitLab From 5eb82498e3a6da8a979c48945e3c1a85c10ccc25 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Thu, 17 Jul 2008 18:08:47 +0000 Subject: [PATCH 0885/1024] [WATCHDOG] Coding style - Indentation - part 1 This brings the watchdog drivers into line with coding style. This patch takes cares of the indentation as described in chapter 1: The preferred way to ease multiple indentation levels in a switch statement is to align the "switch" and its subordinate "case" labels in the same column instead of "double-indenting" the "case" labels. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/acquirewdt.c | 2 +- drivers/watchdog/geodewdt.c | 2 +- drivers/watchdog/pcwd_pci.c | 128 +++++++++++++++++----------------- drivers/watchdog/pcwd_usb.c | 104 +++++++++++++-------------- drivers/watchdog/sc1200wdt.c | 1 - drivers/watchdog/sc520_wdt.c | 3 +- 6 files changed, 119 insertions(+), 121 deletions(-) diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c index 28d9057c9be..340d1eeec16 100644 --- a/drivers/watchdog/acquirewdt.c +++ b/drivers/watchdog/acquirewdt.c @@ -169,7 +169,7 @@ static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return 0; case WDIOC_GETTIMEOUT: - return put_user(WATCHDOG_HEARTBEAT, p); + return put_user(WATCHDOG_HEARTBEAT, p); case WDIOC_SETOPTIONS: { diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index a41f57ce581..74c00698801 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -149,7 +149,7 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, .identity = WATCHDOG_NAME, }; - switch(cmd) { + switch (cmd) { case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c index 67d90810c6e..7f500ee4ee8 100644 --- a/drivers/watchdog/pcwd_pci.c +++ b/drivers/watchdog/pcwd_pci.c @@ -470,90 +470,90 @@ static long pcipcwd_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, - sizeof (ident)) ? -EFAULT : 0; - - case WDIOC_GETSTATUS: - { - int status; - pcipcwd_get_status(&status); - return put_user(status, p); - } + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, + sizeof (ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + { + int status; + pcipcwd_get_status(&status); + return put_user(status, p); + } - case WDIOC_GETBOOTSTATUS: - return put_user(pcipcwd_private.boot_status, p); + case WDIOC_GETBOOTSTATUS: + return put_user(pcipcwd_private.boot_status, p); - case WDIOC_GETTEMP: - { - int temperature; + case WDIOC_GETTEMP: + { + int temperature; - if (pcipcwd_get_temperature(&temperature)) - return -EFAULT; + if (pcipcwd_get_temperature(&temperature)) + return -EFAULT; - return put_user(temperature, p); - } - - case WDIOC_KEEPALIVE: - pcipcwd_keepalive(); - return 0; + return put_user(temperature, p); + } - case WDIOC_SETOPTIONS: - { - int new_options, retval = -EINVAL; + case WDIOC_KEEPALIVE: + pcipcwd_keepalive(); + return 0; - if (get_user (new_options, p)) - return -EFAULT; + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; - if (new_options & WDIOS_DISABLECARD) { - if (pcipcwd_stop()) - return -EIO; - retval = 0; - } + if (get_user (new_options, p)) + return -EFAULT; - if (new_options & WDIOS_ENABLECARD) { - if (pcipcwd_start()) - return -EIO; - retval = 0; - } + if (new_options & WDIOS_DISABLECARD) { + if (pcipcwd_stop()) + return -EIO; + retval = 0; + } - if (new_options & WDIOS_TEMPPANIC) { - temp_panic = 1; - retval = 0; - } + if (new_options & WDIOS_ENABLECARD) { + if (pcipcwd_start()) + return -EIO; + retval = 0; + } - return retval; + if (new_options & WDIOS_TEMPPANIC) { + temp_panic = 1; + retval = 0; } - case WDIOC_SETTIMEOUT: - { - int new_heartbeat; + return retval; + } - if (get_user(new_heartbeat, p)) - return -EFAULT; + case WDIOC_SETTIMEOUT: + { + int new_heartbeat; - if (pcipcwd_set_heartbeat(new_heartbeat)) - return -EINVAL; + if (get_user(new_heartbeat, p)) + return -EFAULT; - pcipcwd_keepalive(); - /* Fall */ - } + if (pcipcwd_set_heartbeat(new_heartbeat)) + return -EINVAL; - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, p); + pcipcwd_keepalive(); + /* Fall */ + } - case WDIOC_GETTIMELEFT: - { - int time_left; + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); - if (pcipcwd_get_timeleft(&time_left)) - return -EFAULT; + case WDIOC_GETTIMELEFT: + { + int time_left; - return put_user(time_left, p); - } + if (pcipcwd_get_timeleft(&time_left)) + return -EFAULT; + + return put_user(time_left, p); + } - default: - return -ENOTTY; + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index bc399cf65cf..8194435052c 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -382,77 +382,77 @@ static long usb_pcwd_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, - sizeof (ident)) ? -EFAULT : 0; + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, + sizeof (ident)) ? -EFAULT : 0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); - case WDIOC_GETTEMP: - { - int temperature; + case WDIOC_GETTEMP: + { + int temperature; - if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature)) - return -EFAULT; + if (usb_pcwd_get_temperature(usb_pcwd_device, &temperature)) + return -EFAULT; - return put_user(temperature, p); - } + return put_user(temperature, p); + } - case WDIOC_KEEPALIVE: - usb_pcwd_keepalive(usb_pcwd_device); - return 0; + case WDIOC_KEEPALIVE: + usb_pcwd_keepalive(usb_pcwd_device); + return 0; - case WDIOC_SETOPTIONS: - { - int new_options, retval = -EINVAL; + case WDIOC_SETOPTIONS: + { + int new_options, retval = -EINVAL; - if (get_user (new_options, p)) - return -EFAULT; + if (get_user (new_options, p)) + return -EFAULT; - if (new_options & WDIOS_DISABLECARD) { - usb_pcwd_stop(usb_pcwd_device); - retval = 0; - } - - if (new_options & WDIOS_ENABLECARD) { - usb_pcwd_start(usb_pcwd_device); - retval = 0; - } + if (new_options & WDIOS_DISABLECARD) { + usb_pcwd_stop(usb_pcwd_device); + retval = 0; + } - return retval; + if (new_options & WDIOS_ENABLECARD) { + usb_pcwd_start(usb_pcwd_device); + retval = 0; } - case WDIOC_SETTIMEOUT: - { - int new_heartbeat; + return retval; + } - if (get_user(new_heartbeat, p)) - return -EFAULT; + case WDIOC_SETTIMEOUT: + { + int new_heartbeat; - if (usb_pcwd_set_heartbeat(usb_pcwd_device, new_heartbeat)) - return -EINVAL; + if (get_user(new_heartbeat, p)) + return -EFAULT; - usb_pcwd_keepalive(usb_pcwd_device); - /* Fall */ - } + if (usb_pcwd_set_heartbeat(usb_pcwd_device, new_heartbeat)) + return -EINVAL; - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, p); + usb_pcwd_keepalive(usb_pcwd_device); + /* Fall */ + } - case WDIOC_GETTIMELEFT: - { - int time_left; + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, p); - if (usb_pcwd_get_timeleft(usb_pcwd_device, &time_left)) - return -EFAULT; + case WDIOC_GETTIMELEFT: + { + int time_left; - return put_user(time_left, p); - } + if (usb_pcwd_get_timeleft(usb_pcwd_device, &time_left)) + return -EFAULT; + + return put_user(time_left, p); + } - default: - return -ENOTTY; + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index 621ebad56d8..03e67fa4d68 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -196,7 +196,6 @@ static long sc1200wdt_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { - case WDIOC_GETSUPPORT: if (copy_to_user(argp, &ident, sizeof ident)) return -EFAULT; diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c index 01de239f49e..1d5ba15dec6 100644 --- a/drivers/watchdog/sc520_wdt.c +++ b/drivers/watchdog/sc520_wdt.c @@ -290,8 +290,7 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) .identity = "SC520", }; - switch (cmd) - { + switch (cmd) { default: return -ENOTTY; case WDIOC_GETSUPPORT: -- GitLab From 0c06090c9472db0525cb6fe229c3bea33bbbbb3c Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Fri, 18 Jul 2008 11:41:17 +0000 Subject: [PATCH 0886/1024] [WATCHDOG] Coding style - Indentation - part 2 This brings the watchdog drivers into line with coding style. This patch takes cares of the indentation as described in chapter 1. Main changes: * Re-structure the ioctl switch call for all drivers as follows: switch (cmd) { case WDIOC_GETSUPPORT: case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: case WDIOC_GETTEMP: case WDIOC_SETOPTIONS: case WDIOC_KEEPALIVE: case WDIOC_SETTIMEOUT: case WDIOC_GETTIMEOUT: case WDIOC_GETTIMELEFT: default: } This to make the migration from the drivers to the uniform watchdog device driver easier in the future. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/acquirewdt.c | 14 ++++---- drivers/watchdog/advantechwdt.c | 26 +++++++-------- drivers/watchdog/alim1535_wdt.c | 6 ++-- drivers/watchdog/alim7101_wdt.c | 6 ++-- drivers/watchdog/ar7_wdt.c | 4 +-- drivers/watchdog/at32ap700x_wdt.c | 34 +++++++++---------- drivers/watchdog/at91rm9200_wdt.c | 28 ++++++++-------- drivers/watchdog/bfin_wdt.c | 28 ++++++++-------- drivers/watchdog/booke_wdt.c | 18 +++++------ drivers/watchdog/cpu5wdt.c | 12 +++---- drivers/watchdog/davinci_wdt.c | 8 ++--- drivers/watchdog/ep93xx_wdt.c | 10 +++--- drivers/watchdog/eurotechwdt.c | 36 ++++++++++----------- drivers/watchdog/geodewdt.c | 30 ++++++++--------- drivers/watchdog/i6300esb.c | 8 ++--- drivers/watchdog/iTCO_wdt.c | 8 ++--- drivers/watchdog/ib700wdt.c | 30 ++++++++--------- drivers/watchdog/ibmasr.c | 20 ++++++------ drivers/watchdog/indydog.c | 10 +++--- drivers/watchdog/iop_wdt.c | 18 +++++------ drivers/watchdog/it8712f_wdt.c | 4 +-- drivers/watchdog/ixp2000_wdt.c | 10 +++--- drivers/watchdog/ixp4xx_wdt.c | 10 +++--- drivers/watchdog/ks8695_wdt.c | 28 ++++++++-------- drivers/watchdog/mixcomwd.c | 8 ++--- drivers/watchdog/mpcore_wdt.c | 12 +++---- drivers/watchdog/mtx-1_wdt.c | 12 +++---- drivers/watchdog/omap_wdt.c | 4 +-- drivers/watchdog/pc87413_wdt.c | 30 ++++++++--------- drivers/watchdog/pcwd.c | 6 ++-- drivers/watchdog/pcwd_pci.c | 8 ++--- drivers/watchdog/pcwd_usb.c | 8 ++--- drivers/watchdog/pnx4008_wdt.c | 10 +++--- drivers/watchdog/s3c2410_wdt.c | 4 +-- drivers/watchdog/sa1100_wdt.c | 10 +++--- drivers/watchdog/sb_wdog.c | 10 +++--- drivers/watchdog/sbc60xxwdt.c | 10 +++--- drivers/watchdog/sbc7240_wdt.c | 54 ++++++++++++++++--------------- drivers/watchdog/sbc_epx_c3.c | 10 +++--- drivers/watchdog/sc1200wdt.c | 36 ++++++++++----------- drivers/watchdog/sc520_wdt.c | 10 +++--- drivers/watchdog/scx200_wdt.c | 4 +-- drivers/watchdog/shwdt.c | 28 ++++++++-------- drivers/watchdog/smsc37b787_wdt.c | 34 +++++++++---------- drivers/watchdog/softdog.c | 4 +-- drivers/watchdog/txx9wdt.c | 4 +-- drivers/watchdog/w83627hf_wdt.c | 24 +++++++------- drivers/watchdog/w83697hf_wdt.c | 30 ++++++++--------- drivers/watchdog/w83877f_wdt.c | 10 +++--- drivers/watchdog/w83977f_wdt.c | 14 ++++---- drivers/watchdog/wafer5823wdt.c | 32 +++++++++--------- drivers/watchdog/wdt.c | 4 +-- drivers/watchdog/wdt977.c | 14 ++++---- drivers/watchdog/wdt_pci.c | 6 ++-- 54 files changed, 428 insertions(+), 428 deletions(-) diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c index 340d1eeec16..7a5c69421f1 100644 --- a/drivers/watchdog/acquirewdt.c +++ b/drivers/watchdog/acquirewdt.c @@ -164,13 +164,6 @@ static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - acq_keepalive(); - return 0; - - case WDIOC_GETTIMEOUT: - return put_user(WATCHDOG_HEARTBEAT, p); - case WDIOC_SETOPTIONS: { if (get_user(options, p)) @@ -185,6 +178,13 @@ static long acq_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + acq_keepalive(); + return 0; + + case WDIOC_GETTIMEOUT: + return put_user(WATCHDOG_HEARTBEAT, p); + default: return -ENOTTY; } diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c index e6bf8d2d3d3..bfec1660047 100644 --- a/drivers/watchdog/advantechwdt.c +++ b/drivers/watchdog/advantechwdt.c @@ -152,19 +152,6 @@ static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - advwdt_ping(); - break; - - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - if (advwdt_set_heartbeat(new_timeout)) - return -EINVAL; - advwdt_ping(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); case WDIOC_SETOPTIONS: { int options, retval = -EINVAL; @@ -181,6 +168,19 @@ static long advwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + advwdt_ping(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if (advwdt_set_heartbeat(new_timeout)) + return -EINVAL; + advwdt_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); default: return -ENOTTY; } diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c index 80e323ddc4b..dfa11d19043 100644 --- a/drivers/watchdog/alim1535_wdt.c +++ b/drivers/watchdog/alim1535_wdt.c @@ -195,9 +195,6 @@ static long ali_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - ali_keepalive(); - return 0; case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -214,6 +211,9 @@ static long ali_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + ali_keepalive(); + return 0; case WDIOC_SETTIMEOUT: { int new_timeout; diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c index 726e75d9db7..049c9122e40 100644 --- a/drivers/watchdog/alim7101_wdt.c +++ b/drivers/watchdog/alim7101_wdt.c @@ -251,9 +251,6 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -270,6 +267,9 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; case WDIOC_SETTIMEOUT: { int new_timeout; diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c index ef7b0d67095..9a81a205ef7 100644 --- a/drivers/watchdog/ar7_wdt.c +++ b/drivers/watchdog/ar7_wdt.c @@ -251,8 +251,6 @@ static long ar7_wdt_ioctl(struct file *file, int new_margin; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: if (copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident))) @@ -281,6 +279,8 @@ static long ar7_wdt_ioctl(struct file *file, if (put_user(margin, (int *)arg)) return -EFAULT; return 0; + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index c5dc5e912fb..4538b57f451 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -221,27 +221,10 @@ static long at32_wdt_ioctl(struct file *file, int __user *p = argp; switch (cmd) { - case WDIOC_KEEPALIVE: - at32_wdt_pat(); - ret = 0; - break; case WDIOC_GETSUPPORT: ret = copy_to_user(argp, &at32_wdt_info, sizeof(at32_wdt_info)) ? -EFAULT : 0; break; - case WDIOC_SETTIMEOUT: - ret = get_user(time, p); - if (ret) - break; - ret = at32_wdt_settimeout(time); - if (ret) - break; - /* Enable new time value */ - at32_wdt_start(); - /* fall through */ - case WDIOC_GETTIMEOUT: - ret = put_user(wdt->timeout, p); - break; case WDIOC_GETSTATUS: ret = put_user(0, p); break; @@ -258,6 +241,23 @@ static long at32_wdt_ioctl(struct file *file, at32_wdt_start(); ret = 0; break; + case WDIOC_KEEPALIVE: + at32_wdt_pat(); + ret = 0; + break; + case WDIOC_SETTIMEOUT: + ret = get_user(time, p); + if (ret) + break; + ret = at32_wdt_settimeout(time); + if (ret) + break; + /* Enable new time value */ + at32_wdt_start(); + /* fall through */ + case WDIOC_GETTIMEOUT: + ret = put_user(wdt->timeout, p); + break; } return ret; diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index bb79f649dc7..2313f44144f 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -137,23 +137,9 @@ static long at91_wdt_ioct(struct file *file, int new_value; switch (cmd) { - case WDIOC_KEEPALIVE: - at91_wdt_reload(); /* pat the watchdog */ - return 0; case WDIOC_GETSUPPORT: return copy_to_user(argp, &at91_wdt_info, sizeof(at91_wdt_info)) ? -EFAULT : 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_value, p)) - return -EFAULT; - if (at91_wdt_settimeout(new_value)) - return -EINVAL; - /* Enable new time value */ - at91_wdt_start(); - /* Return current value */ - return put_user(wdt_time, p); - case WDIOC_GETTIMEOUT: - return put_user(wdt_time, p); case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); @@ -165,6 +151,20 @@ static long at91_wdt_ioct(struct file *file, if (new_value & WDIOS_ENABLECARD) at91_wdt_start(); return 0; + case WDIOC_KEEPALIVE: + at91_wdt_reload(); /* pat the watchdog */ + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + if (at91_wdt_settimeout(new_value)) + return -EINVAL; + /* Enable new time value */ + at91_wdt_start(); + /* Return current value */ + return put_user(wdt_time, p); + case WDIOC_GETTIMEOUT: + return put_user(wdt_time, p); default: return -ENOTTY; } diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index 8f6e871b3fe..31b42253054 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -265,20 +265,6 @@ static long bfin_wdt_ioctl(struct file *file, case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(!!(_bfin_swrst & SWRST_RESET_WDOG), p); - case WDIOC_KEEPALIVE: - bfin_wdt_keepalive(); - return 0; - case WDIOC_SETTIMEOUT: { - int new_timeout; - - if (get_user(new_timeout, p)) - return -EFAULT; - if (bfin_wdt_set_timeout(new_timeout)) - return -EINVAL; - } - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); case WDIOC_SETOPTIONS: { unsigned long flags; int options, ret = -EINVAL; @@ -298,6 +284,20 @@ static long bfin_wdt_ioctl(struct file *file, spin_unlock_irqrestore(&bfin_wdt_spinlock, flags); return ret; } + case WDIOC_KEEPALIVE: + bfin_wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: { + int new_timeout; + + if (get_user(new_timeout, p)) + return -EFAULT; + if (bfin_wdt_set_timeout(new_timeout)) + return -EINVAL; + } + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); default: return -ENOTTY; } diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index 06b7a17a60e..c3b78a76f17 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -99,6 +99,15 @@ static long booke_wdt_ioctl(struct file *file, tmp = mfspr(SPRN_TSR) & TSR_WRS(3); /* returns 1 if last reset was caused by the WDT */ return (tmp ? 1 : 0); + case WDIOC_SETOPTIONS: + if (get_user(tmp, p)) + return -EINVAL; + if (tmp == WDIOS_ENABLECARD) { + booke_wdt_ping(); + break; + } else + return -EINVAL; + return 0; case WDIOC_KEEPALIVE: booke_wdt_ping(); return 0; @@ -110,15 +119,6 @@ static long booke_wdt_ioctl(struct file *file, return 0; case WDIOC_GETTIMEOUT: return put_user(booke_wdt_period, p); - case WDIOC_SETOPTIONS: - if (get_user(tmp, p)) - return -EINVAL; - if (tmp == WDIOS_ENABLECARD) { - booke_wdt_ping(); - break; - } else - return -EINVAL; - return 0; default: return -ENOTTY; } diff --git a/drivers/watchdog/cpu5wdt.c b/drivers/watchdog/cpu5wdt.c index ec324e5e1c9..71f6d7eec9a 100644 --- a/drivers/watchdog/cpu5wdt.c +++ b/drivers/watchdog/cpu5wdt.c @@ -160,8 +160,9 @@ static long cpu5wdt_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { - case WDIOC_KEEPALIVE: - cpu5wdt_reset(); + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; break; case WDIOC_GETSTATUS: value = inb(port + CPU5WDT_STATUS_REG); @@ -169,10 +170,6 @@ static long cpu5wdt_ioctl(struct file *file, unsigned int cmd, return put_user(value, p); case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) - return -EFAULT; - break; case WDIOC_SETOPTIONS: if (get_user(value, p)) return -EFAULT; @@ -181,6 +178,9 @@ static long cpu5wdt_ioctl(struct file *file, unsigned int cmd, if (value & WDIOS_DISABLECARD) cpu5wdt_stop(); break; + case WDIOC_KEEPALIVE: + cpu5wdt_reset(); + break; default: return -ENOTTY; } diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c index 926b59c4118..802aeba347a 100644 --- a/drivers/watchdog/davinci_wdt.c +++ b/drivers/watchdog/davinci_wdt.c @@ -159,14 +159,14 @@ static long davinci_wdt_ioctl(struct file *file, ret = put_user(0, (int *)arg); break; - case WDIOC_GETTIMEOUT: - ret = put_user(heartbeat, (int *)arg); - break; - case WDIOC_KEEPALIVE: wdt_service(); ret = 0; break; + + case WDIOC_GETTIMEOUT: + ret = put_user(heartbeat, (int *)arg); + break; } return ret; } diff --git a/drivers/watchdog/ep93xx_wdt.c b/drivers/watchdog/ep93xx_wdt.c index cdcdd11173a..07b74a76892 100644 --- a/drivers/watchdog/ep93xx_wdt.c +++ b/drivers/watchdog/ep93xx_wdt.c @@ -155,15 +155,15 @@ static long ep93xx_wdt_ioctl(struct file *file, ret = put_user(boot_status, (int __user *)arg); break; - case WDIOC_GETTIMEOUT: - /* actually, it is 0.250 seconds.... */ - ret = put_user(1, (int __user *)arg); - break; - case WDIOC_KEEPALIVE: wdt_keepalive(); ret = 0; break; + + case WDIOC_GETTIMEOUT: + /* actually, it is 0.250 seconds.... */ + ret = put_user(1, (int __user *)arg); + break; } return ret; } diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c index b94e6ef4c7a..96250118fd7 100644 --- a/drivers/watchdog/eurotechwdt.c +++ b/drivers/watchdog/eurotechwdt.c @@ -249,9 +249,6 @@ static long eurwdt_ioctl(struct file *file, int options, retval = -EINVAL; switch (cmd) { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; @@ -259,6 +256,22 @@ static long eurwdt_ioctl(struct file *file, case WDIOC_GETBOOTSTATUS: return put_user(0, p); + case WDIOC_SETOPTIONS: + if (get_user(options, p)) + return -EFAULT; + spin_lock(&eurwdt_lock); + if (options & WDIOS_DISABLECARD) { + eurwdt_disable_timer(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + eurwdt_activate_timer(); + eurwdt_ping(); + retval = 0; + } + spin_unlock(&eurwdt_lock); + return retval; + case WDIOC_KEEPALIVE: spin_lock(&eurwdt_lock); eurwdt_ping(); @@ -282,21 +295,8 @@ static long eurwdt_ioctl(struct file *file, case WDIOC_GETTIMEOUT: return put_user(eurwdt_timeout, p); - case WDIOC_SETOPTIONS: - if (get_user(options, p)) - return -EFAULT; - spin_lock(&eurwdt_lock); - if (options & WDIOS_DISABLECARD) { - eurwdt_disable_timer(); - retval = 0; - } - if (options & WDIOS_ENABLECARD) { - eurwdt_activate_timer(); - eurwdt_ping(); - retval = 0; - } - spin_unlock(&eurwdt_lock); - return retval; + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index 74c00698801..04b861cfdf0 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -159,22 +159,6 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - geodewdt_ping(); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(interval, p)) - return -EFAULT; - - if (geodewdt_set_heartbeat(interval)) - return -EINVAL; - -/* Fall through */ - - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - case WDIOC_SETOPTIONS: { int options, ret = -EINVAL; @@ -194,6 +178,20 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, return ret; } + case WDIOC_KEEPALIVE: + geodewdt_ping(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(interval, p)) + return -EFAULT; + + if (geodewdt_set_heartbeat(interval)) + return -EINVAL; + /* Fall through */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: return -ENOTTY; } diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c index 01a283f7a27..c768cb71890 100644 --- a/drivers/watchdog/i6300esb.c +++ b/drivers/watchdog/i6300esb.c @@ -280,10 +280,6 @@ static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETBOOTSTATUS: return put_user(triggered, p); - case WDIOC_KEEPALIVE: - esb_timer_keepalive(); - return 0; - case WDIOC_SETOPTIONS: { if (get_user(new_options, p)) @@ -301,6 +297,10 @@ static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + esb_timer_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: { if (get_user(new_heartbeat, p)) diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index c9ca8f691d8..b1876643663 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -532,10 +532,6 @@ static long iTCO_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - iTCO_wdt_keepalive(); - return 0; - case WDIOC_SETOPTIONS: { if (get_user(new_options, p)) @@ -552,6 +548,10 @@ static long iTCO_wdt_ioctl(struct file *file, unsigned int cmd, } return retval; } + case WDIOC_KEEPALIVE: + iTCO_wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: { if (get_user(new_heartbeat, p)) diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c index 9eb9537c370..6aa914e5caf 100644 --- a/drivers/watchdog/ib700wdt.c +++ b/drivers/watchdog/ib700wdt.c @@ -213,21 +213,6 @@ static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - ibwdt_ping(); - break; - - case WDIOC_SETTIMEOUT: - if (get_user(new_margin, p)) - return -EFAULT; - if (ibwdt_set_heartbeat(new_margin)) - return -EINVAL; - ibwdt_ping(); - /* Fall */ - - case WDIOC_GETTIMEOUT: - return put_user(wd_times[wd_margin], p); - case WDIOC_SETOPTIONS: { int options, retval = -EINVAL; @@ -245,6 +230,21 @@ static long ibwdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + ibwdt_ping(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, p)) + return -EFAULT; + if (ibwdt_set_heartbeat(new_margin)) + return -EINVAL; + ibwdt_ping(); + /* Fall */ + + case WDIOC_GETTIMEOUT: + return put_user(wd_times[wd_margin], p); + default: return -ENOTTY; } diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c index 6824bf80b37..0b549f3ff91 100644 --- a/drivers/watchdog/ibmasr.c +++ b/drivers/watchdog/ibmasr.c @@ -287,16 +287,6 @@ static long asr_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - asr_toggle(); - return 0; - /* - * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT - * and WDIOC_GETTIMEOUT always returns 256. - */ - case WDIOC_GETTIMEOUT: - heartbeat = 256; - return put_user(heartbeat, p); case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -313,6 +303,16 @@ static long asr_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + asr_toggle(); + return 0; + /* + * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT + * and WDIOC_GETTIMEOUT always returns 256. + */ + case WDIOC_GETTIMEOUT: + heartbeat = 256; + return put_user(heartbeat, p); default: return -ENOTTY; } diff --git a/drivers/watchdog/indydog.c b/drivers/watchdog/indydog.c index 0bffea37404..73c9e7992fe 100644 --- a/drivers/watchdog/indydog.c +++ b/drivers/watchdog/indydog.c @@ -128,11 +128,6 @@ static long indydog_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, (int *)arg); - case WDIOC_KEEPALIVE: - indydog_ping(); - return 0; - case WDIOC_GETTIMEOUT: - return put_user(WATCHDOG_TIMEOUT, (int *)arg); case WDIOC_SETOPTIONS: { if (get_user(options, (int *)arg)) @@ -147,6 +142,11 @@ static long indydog_ioctl(struct file *file, unsigned int cmd, } return retval; } + case WDIOC_KEEPALIVE: + indydog_ping(); + return 0; + case WDIOC_GETTIMEOUT: + return put_user(WATCHDOG_TIMEOUT, (int *)arg); default: return -ENOTTY; } diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c index e54c888d2af..e0d0a90ea10 100644 --- a/drivers/watchdog/iop_wdt.c +++ b/drivers/watchdog/iop_wdt.c @@ -153,15 +153,6 @@ static long iop_wdt_ioctl(struct file *file, ret = put_user(boot_status, argp); break; - case WDIOC_GETTIMEOUT: - ret = put_user(iop_watchdog_timeout(), argp); - break; - - case WDIOC_KEEPALIVE: - wdt_enable(); - ret = 0; - break; - case WDIOC_SETOPTIONS: if (get_user(options, (int *)arg)) return -EFAULT; @@ -181,6 +172,15 @@ static long iop_wdt_ioctl(struct file *file, ret = 0; } break; + + case WDIOC_KEEPALIVE: + wdt_enable(); + ret = 0; + break; + + case WDIOC_GETTIMEOUT: + ret = put_user(iop_watchdog_timeout(), argp); + break; } return ret; } diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c index 51bfd572183..c1db74f6e31 100644 --- a/drivers/watchdog/it8712f_wdt.c +++ b/drivers/watchdog/it8712f_wdt.c @@ -244,8 +244,6 @@ static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd, int value; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: if (copy_to_user(argp, &ident, sizeof(ident))) return -EFAULT; @@ -284,6 +282,8 @@ static long it8712f_wdt_ioctl(struct file *file, unsigned int cmd, if (put_user(margin, p)) return -EFAULT; return 0; + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/ixp2000_wdt.c b/drivers/watchdog/ixp2000_wdt.c index 943ceffbd68..a77f69d5287 100644 --- a/drivers/watchdog/ixp2000_wdt.c +++ b/drivers/watchdog/ixp2000_wdt.c @@ -126,6 +126,11 @@ static long ixp2000_wdt_ioctl(struct file *file, unsigned int cmd, ret = put_user(0, (int *)arg); break; + case WDIOC_KEEPALIVE: + wdt_enable(); + ret = 0; + break; + case WDIOC_SETTIMEOUT: ret = get_user(time, (int *)arg); if (ret) @@ -143,11 +148,6 @@ static long ixp2000_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETTIMEOUT: ret = put_user(heartbeat, (int *)arg); break; - - case WDIOC_KEEPALIVE: - wdt_enable(); - ret = 0; - break; } return ret; diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c index 1bafd7b58ca..b94713e4773 100644 --- a/drivers/watchdog/ixp4xx_wdt.c +++ b/drivers/watchdog/ixp4xx_wdt.c @@ -117,6 +117,11 @@ static long ixp4xx_wdt_ioctl(struct file *file, unsigned int cmd, ret = put_user(boot_status, (int *)arg); break; + case WDIOC_KEEPALIVE: + wdt_enable(); + ret = 0; + break; + case WDIOC_SETTIMEOUT: ret = get_user(time, (int *)arg); if (ret) @@ -134,11 +139,6 @@ static long ixp4xx_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETTIMEOUT: ret = put_user(heartbeat, (int *)arg); break; - - case WDIOC_KEEPALIVE: - wdt_enable(); - ret = 0; - break; } return ret; } diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c index 6d052b80aa2..f8566d5c62f 100644 --- a/drivers/watchdog/ks8695_wdt.c +++ b/drivers/watchdog/ks8695_wdt.c @@ -161,23 +161,9 @@ static long ks8695_wdt_ioctl(struct file *file, unsigned int cmd, int new_value; switch (cmd) { - case WDIOC_KEEPALIVE: - ks8695_wdt_reload(); /* pat the watchdog */ - return 0; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ks8695_wdt_info, sizeof(ks8695_wdt_info)) ? -EFAULT : 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_value, p)) - return -EFAULT; - if (ks8695_wdt_settimeout(new_value)) - return -EINVAL; - /* Enable new time value */ - ks8695_wdt_start(); - /* Return current value */ - return put_user(wdt_time, p); - case WDIOC_GETTIMEOUT: - return put_user(wdt_time, p); case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); @@ -189,6 +175,20 @@ static long ks8695_wdt_ioctl(struct file *file, unsigned int cmd, if (new_value & WDIOS_ENABLECARD) ks8695_wdt_start(); return 0; + case WDIOC_KEEPALIVE: + ks8695_wdt_reload(); /* pat the watchdog */ + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_value, p)) + return -EFAULT; + if (ks8695_wdt_settimeout(new_value)) + return -EINVAL; + /* Enable new time value */ + ks8695_wdt_start(); + /* Return current value */ + return put_user(wdt_time, p); + case WDIOC_GETTIMEOUT: + return put_user(wdt_time, p); default: return -ENOTTY; } diff --git a/drivers/watchdog/mixcomwd.c b/drivers/watchdog/mixcomwd.c index 2248a818759..407b025cb10 100644 --- a/drivers/watchdog/mixcomwd.c +++ b/drivers/watchdog/mixcomwd.c @@ -208,6 +208,10 @@ static long mixcomwd_ioctl(struct file *file, }; switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; case WDIOC_GETSTATUS: status = mixcomwd_opened; if (!nowayout) @@ -215,10 +219,6 @@ static long mixcomwd_ioctl(struct file *file, return put_user(status, p); case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) - return -EFAULT; - break; case WDIOC_KEEPALIVE: mixcomwd_ping(); break; diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c index 5e58f8b73d0..3c4f95599c6 100644 --- a/drivers/watchdog/mpcore_wdt.c +++ b/drivers/watchdog/mpcore_wdt.c @@ -243,6 +243,12 @@ static long mpcore_wdt_ioctl(struct file *file, unsigned int cmd, ret = 0; break; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + uarg.i = 0; + ret = 0; + break; + case WDIOC_SETOPTIONS: ret = -EINVAL; if (uarg.i & WDIOS_DISABLECARD) { @@ -255,12 +261,6 @@ static long mpcore_wdt_ioctl(struct file *file, unsigned int cmd, } break; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - uarg.i = 0; - ret = 0; - break; - case WDIOC_KEEPALIVE: mpcore_wdt_keepalive(wdt); ret = 0; diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index e0b8cdfa5e7..f820b82da7c 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -148,17 +148,14 @@ static long mtx1_wdt_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { - case WDIOC_KEEPALIVE: - mtx1_wdt_reset(); + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; break; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: put_user(0, p); break; - case WDIOC_GETSUPPORT: - if (copy_to_user(argp, &ident, sizeof(ident))) - return -EFAULT; - break; case WDIOC_SETOPTIONS: if (get_user(value, p)) return -EFAULT; @@ -169,6 +166,9 @@ static long mtx1_wdt_ioctl(struct file *file, unsigned int cmd, else return -EINVAL; return 0; + case WDIOC_KEEPALIVE: + mtx1_wdt_reset(); + break; default: return -ENOTTY; } diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 5aae071cc04..7beb21ce1de 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -197,8 +197,6 @@ static long omap_wdt_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)); @@ -231,6 +229,8 @@ static long omap_wdt_ioctl(struct file *file, unsigned int cmd, /* Fall */ case WDIOC_GETTIMEOUT: return put_user(timer_margin, (int __user *)arg); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c index 326f2d2ded3..5fc7f134995 100644 --- a/drivers/watchdog/pc87413_wdt.c +++ b/drivers/watchdog/pc87413_wdt.c @@ -426,6 +426,21 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd, return put_user(pc87413_status(), uarg.i); case WDIOC_GETBOOTSTATUS: return put_user(0, uarg.i); + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + if (get_user(options, uarg.i)) + return -EFAULT; + if (options & WDIOS_DISABLECARD) { + pc87413_disable(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + pc87413_enable(); + retval = 0; + } + return retval; + } case WDIOC_KEEPALIVE: pc87413_refresh(); #ifdef DEBUG @@ -445,21 +460,6 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETTIMEOUT: new_timeout = timeout * 60; return put_user(new_timeout, uarg.i); - case WDIOC_SETOPTIONS: - { - int options, retval = -EINVAL; - if (get_user(options, uarg.i)) - return -EFAULT; - if (options & WDIOS_DISABLECARD) { - pc87413_disable(); - retval = 0; - } - if (options & WDIOS_ENABLECARD) { - pc87413_enable(); - retval = 0; - } - return retval; - } default: return -ENOTTY; } diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c index e1259adf09f..134386a8885 100644 --- a/drivers/watchdog/pcwd.c +++ b/drivers/watchdog/pcwd.c @@ -612,9 +612,6 @@ static long pcwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) }; switch (cmd) { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: if (copy_to_user(argp, &ident, sizeof(ident))) return -EFAULT; @@ -669,6 +666,9 @@ static long pcwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETTIMEOUT: return put_user(heartbeat, argp); + + default: + return -ENOTTY; } return 0; diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c index 7f500ee4ee8..2617129a7cc 100644 --- a/drivers/watchdog/pcwd_pci.c +++ b/drivers/watchdog/pcwd_pci.c @@ -494,10 +494,6 @@ static long pcipcwd_ioctl(struct file *file, unsigned int cmd, return put_user(temperature, p); } - case WDIOC_KEEPALIVE: - pcipcwd_keepalive(); - return 0; - case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -525,6 +521,10 @@ static long pcipcwd_ioctl(struct file *file, unsigned int cmd, return retval; } + case WDIOC_KEEPALIVE: + pcipcwd_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: { int new_heartbeat; diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index 8194435052c..8c582bc0588 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -400,10 +400,6 @@ static long usb_pcwd_ioctl(struct file *file, unsigned int cmd, return put_user(temperature, p); } - case WDIOC_KEEPALIVE: - usb_pcwd_keepalive(usb_pcwd_device); - return 0; - case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -424,6 +420,10 @@ static long usb_pcwd_ioctl(struct file *file, unsigned int cmd, return retval; } + case WDIOC_KEEPALIVE: + usb_pcwd_keepalive(usb_pcwd_device); + return 0; + case WDIOC_SETTIMEOUT: { int new_heartbeat; diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index 56dee3bfd4a..6eadf5ebb9b 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -194,6 +194,11 @@ static long pnx4008_wdt_ioctl(struct inode *inode, struct file *file, ret = put_user(boot_status, (int *)arg); break; + case WDIOC_KEEPALIVE: + wdt_enable(); + ret = 0; + break; + case WDIOC_SETTIMEOUT: ret = get_user(time, (int *)arg); if (ret) @@ -211,11 +216,6 @@ static long pnx4008_wdt_ioctl(struct inode *inode, struct file *file, case WDIOC_GETTIMEOUT: ret = put_user(heartbeat, (int *)arg); break; - - case WDIOC_KEEPALIVE: - wdt_enable(); - ret = 0; - break; } return ret; } diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 97b4a2e8eb0..44bf5e4282e 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -305,8 +305,6 @@ static long s3c2410wdt_ioctl(struct file *file, unsigned int cmd, int new_margin; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &s3c2410_wdt_ident, sizeof(s3c2410_wdt_ident)) ? -EFAULT : 0; @@ -325,6 +323,8 @@ static long s3c2410wdt_ioctl(struct file *file, unsigned int cmd, return put_user(tmr_margin, p); case WDIOC_GETTIMEOUT: return put_user(tmr_margin, p); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index 869d538c02f..27d6898a7c9 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -107,6 +107,11 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd, ret = put_user(boot_status, p); break; + case WDIOC_KEEPALIVE: + OSMR3 = OSCR + pre_margin; + ret = 0; + break; + case WDIOC_SETTIMEOUT: ret = get_user(time, p); if (ret) @@ -124,11 +129,6 @@ static long sa1100dog_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETTIMEOUT: ret = put_user(pre_margin / OSCR_FREQ, p); break; - - case WDIOC_KEEPALIVE: - OSMR3 = OSCR + pre_margin; - ret = 0; - break; } return ret; } diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c index c8b544ce77f..528097651f7 100644 --- a/drivers/watchdog/sb_wdog.c +++ b/drivers/watchdog/sb_wdog.c @@ -182,6 +182,11 @@ static long sbwdog_ioctl(struct file *file, unsigned int cmd, ret = put_user(0, p); break; + case WDIOC_KEEPALIVE: + sbwdog_pet(user_dog); + ret = 0; + break; + case WDIOC_SETTIMEOUT: ret = get_user(time, p); if (ret) @@ -203,11 +208,6 @@ static long sbwdog_ioctl(struct file *file, unsigned int cmd, */ ret = put_user(__raw_readq(user_dog - 8) / 1000000, p); break; - - case WDIOC_KEEPALIVE: - sbwdog_pet(user_dog); - ret = 0; - break; } return ret; } diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c index e284a5d4fb1..e801cd46c64 100644 --- a/drivers/watchdog/sbc60xxwdt.c +++ b/drivers/watchdog/sbc60xxwdt.c @@ -237,16 +237,11 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) }; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident))? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -262,6 +257,9 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; case WDIOC_SETTIMEOUT: { int new_timeout; @@ -277,6 +275,8 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } case WDIOC_GETTIMEOUT: return put_user(timeout, p); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c index abccbe26524..67ddeb1c830 100644 --- a/drivers/watchdog/sbc7240_wdt.c +++ b/drivers/watchdog/sbc7240_wdt.c @@ -177,39 +177,41 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, (int __user *)arg); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; - case WDIOC_SETOPTIONS:{ - int options; - int retval = -EINVAL; + case WDIOC_SETOPTIONS: + { + int options; + int retval = -EINVAL; - if (get_user(options, (int __user *)arg)) - return -EFAULT; + if (get_user(options, (int __user *)arg)) + return -EFAULT; - if (options & WDIOS_DISABLECARD) { - wdt_disable(); - retval = 0; - } - - if (options & WDIOS_ENABLECARD) { - wdt_enable(); - retval = 0; - } + if (options & WDIOS_DISABLECARD) { + wdt_disable(); + retval = 0; + } - return retval; + if (options & WDIOS_ENABLECARD) { + wdt_enable(); + retval = 0; } - case WDIOC_SETTIMEOUT:{ - int new_timeout; - if (get_user(new_timeout, (int __user *)arg)) - return -EFAULT; + return retval; + } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + { + int new_timeout; - if (wdt_set_timeout(new_timeout)) - return -EINVAL; + if (get_user(new_timeout, (int __user *)arg)) + return -EFAULT; - /* Fall through */ - } + if (wdt_set_timeout(new_timeout)) + return -EINVAL; + + /* Fall through */ + } case WDIOC_GETTIMEOUT: return put_user(timeout, (int __user *)arg); default: diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c index 70ff9cbc8e9..e5e470ca775 100644 --- a/drivers/watchdog/sbc_epx_c3.c +++ b/drivers/watchdog/sbc_epx_c3.c @@ -120,11 +120,6 @@ static long epx_c3_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, argp); - case WDIOC_KEEPALIVE: - epx_c3_pet(); - return 0; - case WDIOC_GETTIMEOUT: - return put_user(WATCHDOG_TIMEOUT, argp); case WDIOC_SETOPTIONS: if (get_user(options, argp)) return -EFAULT; @@ -140,6 +135,11 @@ static long epx_c3_ioctl(struct file *file, unsigned int cmd, } return retval; + case WDIOC_KEEPALIVE: + epx_c3_pet(); + return 0; + case WDIOC_GETTIMEOUT: + return put_user(WATCHDOG_TIMEOUT, argp); default: return -ENOTTY; } diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index 03e67fa4d68..f3bdc8227cc 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -207,24 +207,6 @@ static long sc1200wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - sc1200wdt_write_data(WDTO, timeout); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - /* the API states this is given in secs */ - new_timeout /= 60; - if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) - return -EINVAL; - timeout = new_timeout; - sc1200wdt_write_data(WDTO, timeout); - /* fall through and return the new timeout */ - - case WDIOC_GETTIMEOUT: - return put_user(timeout * 60, p); - case WDIOC_SETOPTIONS: { int options, retval = -EINVAL; @@ -244,6 +226,24 @@ static long sc1200wdt_ioctl(struct file *file, unsigned int cmd, return retval; } + case WDIOC_KEEPALIVE: + sc1200wdt_write_data(WDTO, timeout); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + /* the API states this is given in secs */ + new_timeout /= 60; + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + timeout = new_timeout; + sc1200wdt_write_data(WDTO, timeout); + /* fall through and return the new timeout */ + + case WDIOC_GETTIMEOUT: + return put_user(timeout * 60, p); + default: return -ENOTTY; } diff --git a/drivers/watchdog/sc520_wdt.c b/drivers/watchdog/sc520_wdt.c index 1d5ba15dec6..a2b6c1067ec 100644 --- a/drivers/watchdog/sc520_wdt.c +++ b/drivers/watchdog/sc520_wdt.c @@ -291,16 +291,11 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) }; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -320,6 +315,9 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return retval; } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; case WDIOC_SETTIMEOUT: { int new_timeout; @@ -335,6 +333,8 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } case WDIOC_GETTIMEOUT: return put_user(timeout, p); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/scx200_wdt.c b/drivers/watchdog/scx200_wdt.c index 7c1de94704f..fd5c09446bc 100644 --- a/drivers/watchdog/scx200_wdt.c +++ b/drivers/watchdog/scx200_wdt.c @@ -168,8 +168,6 @@ static long scx200_wdt_ioctl(struct file *file, unsigned int cmd, int new_margin; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: if (copy_to_user(argp, &ident, sizeof(ident))) return -EFAULT; @@ -194,6 +192,8 @@ static long scx200_wdt_ioctl(struct file *file, unsigned int cmd, if (put_user(margin, p)) return -EFAULT; return 0; + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c index 60f0036aaca..824125adf90 100644 --- a/drivers/watchdog/shwdt.c +++ b/drivers/watchdog/shwdt.c @@ -351,20 +351,6 @@ static long sh_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, (int *)arg); - case WDIOC_KEEPALIVE: - sh_wdt_keepalive(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_heartbeat, (int *)arg)) - return -EFAULT; - - if (sh_wdt_set_heartbeat(new_heartbeat)) - return -EINVAL; - - sh_wdt_keepalive(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(heartbeat, (int *)arg); case WDIOC_SETOPTIONS: if (get_user(options, (int *)arg)) return -EFAULT; @@ -380,6 +366,20 @@ static long sh_wdt_ioctl(struct file *file, unsigned int cmd, } return retval; + case WDIOC_KEEPALIVE: + sh_wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_heartbeat, (int *)arg)) + return -EFAULT; + + if (sh_wdt_set_heartbeat(new_heartbeat)) + return -EINVAL; + + sh_wdt_keepalive(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(heartbeat, (int *)arg); default: return -ENOTTY; } diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c index b7c6394b7d7..239383da6d8 100644 --- a/drivers/watchdog/smsc37b787_wdt.c +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -451,6 +451,23 @@ static long wb_smsc_wdt_ioctl(struct file *file, return put_user(wb_smsc_wdt_status(), uarg.i); case WDIOC_GETBOOTSTATUS: return put_user(0, uarg.i); + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, uarg.i)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + wb_smsc_wdt_disable(); + retval = 0; + } + if (options & WDIOS_ENABLECARD) { + wb_smsc_wdt_enable(); + retval = 0; + } + return retval; + } case WDIOC_KEEPALIVE: wb_smsc_wdt_reset_timer(); return 0; @@ -470,23 +487,6 @@ static long wb_smsc_wdt_ioctl(struct file *file, if (unit == UNIT_MINUTE) new_timeout *= 60; return put_user(new_timeout, uarg.i); - case WDIOC_SETOPTIONS: - { - int options, retval = -EINVAL; - - if (get_user(options, uarg.i)) - return -EFAULT; - - if (options & WDIOS_DISABLECARD) { - wb_smsc_wdt_disable(); - retval = 0; - } - if (options & WDIOS_ENABLECARD) { - wb_smsc_wdt_enable(); - retval = 0; - } - return retval; - } default: return -ENOTTY; } diff --git a/drivers/watchdog/softdog.c b/drivers/watchdog/softdog.c index bb3c75eed9d..c650464c5c6 100644 --- a/drivers/watchdog/softdog.c +++ b/drivers/watchdog/softdog.c @@ -206,8 +206,6 @@ static long softdog_ioctl(struct file *file, unsigned int cmd, .identity = "Software Watchdog", }; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: @@ -225,6 +223,8 @@ static long softdog_ioctl(struct file *file, unsigned int cmd, /* Fall */ case WDIOC_GETTIMEOUT: return put_user(soft_margin, p); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c index b729cc447df..8382f9a9534 100644 --- a/drivers/watchdog/txx9wdt.c +++ b/drivers/watchdog/txx9wdt.c @@ -142,8 +142,6 @@ static long txx9wdt_ioctl(struct file *file, unsigned int cmd, }; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: @@ -163,6 +161,8 @@ static long txx9wdt_ioctl(struct file *file, unsigned int cmd, /* Fall */ case WDIOC_GETTIMEOUT: return put_user(timeout, p); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c index 70c843f4201..59507f60999 100644 --- a/drivers/watchdog/w83627hf_wdt.c +++ b/drivers/watchdog/w83627hf_wdt.c @@ -211,18 +211,6 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_ping(); - break; - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - if (wdt_set_heartbeat(new_timeout)) - return -EINVAL; - wdt_ping(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); case WDIOC_SETOPTIONS: { int options, retval = -EINVAL; @@ -239,6 +227,18 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } return retval; } + case WDIOC_KEEPALIVE: + wdt_ping(); + break; + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_timeout)) + return -EINVAL; + wdt_ping(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); default: return -ENOTTY; } diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index 06ddd38675b..12bd6618ed5 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -251,21 +251,6 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_ping(); - break; - - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - if (wdt_set_heartbeat(new_timeout)) - return -EINVAL; - wdt_ping(); - /* Fall */ - - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - case WDIOC_SETOPTIONS: { int options, retval = -EINVAL; @@ -286,6 +271,21 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return retval; } + case WDIOC_KEEPALIVE: + wdt_ping(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_timeout)) + return -EINVAL; + wdt_ping(); + /* Fall */ + + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: return -ENOTTY; } diff --git a/drivers/watchdog/w83877f_wdt.c b/drivers/watchdog/w83877f_wdt.c index 75b546d7d8c..24587d2060c 100644 --- a/drivers/watchdog/w83877f_wdt.c +++ b/drivers/watchdog/w83877f_wdt.c @@ -254,16 +254,11 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) }; switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; case WDIOC_SETOPTIONS: { int new_options, retval = -EINVAL; @@ -283,6 +278,9 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return retval; } + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; case WDIOC_SETTIMEOUT: { int new_timeout; @@ -300,6 +298,8 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } case WDIOC_GETTIMEOUT: return put_user(timeout, p); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/w83977f_wdt.c b/drivers/watchdog/w83977f_wdt.c index 6860a13f5bb..2525da5080c 100644 --- a/drivers/watchdog/w83977f_wdt.c +++ b/drivers/watchdog/w83977f_wdt.c @@ -390,9 +390,6 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) uarg.i = (int __user *)arg; switch (cmd) { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: return copy_to_user(uarg.ident, &ident, sizeof(ident)) ? -EFAULT : 0; @@ -404,10 +401,6 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETBOOTSTATUS: return put_user(0, uarg.i); - case WDIOC_KEEPALIVE: - wdt_keepalive(); - return 0; - case WDIOC_SETOPTIONS: if (get_user(new_options, uarg.i)) return -EFAULT; @@ -424,6 +417,10 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return retval; + case WDIOC_KEEPALIVE: + wdt_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: if (get_user(new_timeout, uarg.i)) return -EFAULT; @@ -437,6 +434,9 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case WDIOC_GETTIMEOUT: return put_user(timeout, uarg.i); + default: + return -ENOTTY; + } } diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c index 886cbbcf3ee..44e81f7d432 100644 --- a/drivers/watchdog/wafer5823wdt.c +++ b/drivers/watchdog/wafer5823wdt.c @@ -145,22 +145,6 @@ static long wafwdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETBOOTSTATUS: return put_user(0, p); - case WDIOC_KEEPALIVE: - wafwdt_ping(); - break; - - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, p)) - return -EFAULT; - if ((new_timeout < 1) || (new_timeout > 255)) - return -EINVAL; - timeout = new_timeout; - wafwdt_stop(); - wafwdt_start(); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(timeout, p); - case WDIOC_SETOPTIONS: { int options, retval = -EINVAL; @@ -181,6 +165,22 @@ static long wafwdt_ioctl(struct file *file, unsigned int cmd, return retval; } + case WDIOC_KEEPALIVE: + wafwdt_ping(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if ((new_timeout < 1) || (new_timeout > 255)) + return -EINVAL; + timeout = new_timeout; + wafwdt_stop(); + wafwdt_start(); + /* Fall */ + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + default: return -ENOTTY; } diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c index 53a6b18bcb9..deeebb2b13e 100644 --- a/drivers/watchdog/wdt.c +++ b/drivers/watchdog/wdt.c @@ -373,8 +373,6 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) #endif /* CONFIG_WDT_501 */ switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: @@ -394,6 +392,8 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) /* Fall */ case WDIOC_GETTIMEOUT: return put_user(heartbeat, p); + default: + return -ENOTTY; } } diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c index bdc28e522f0..60e28d49ff5 100644 --- a/drivers/watchdog/wdt977.c +++ b/drivers/watchdog/wdt977.c @@ -365,9 +365,6 @@ static long wdt977_ioctl(struct file *file, unsigned int cmd, uarg.i = (int __user *)arg; switch (cmd) { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: return copy_to_user(uarg.ident, &ident, sizeof(ident)) ? -EFAULT : 0; @@ -379,10 +376,6 @@ static long wdt977_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETBOOTSTATUS: return put_user(0, uarg.i); - case WDIOC_KEEPALIVE: - wdt977_keepalive(); - return 0; - case WDIOC_SETOPTIONS: if (get_user(new_options, uarg.i)) return -EFAULT; @@ -399,6 +392,10 @@ static long wdt977_ioctl(struct file *file, unsigned int cmd, return retval; + case WDIOC_KEEPALIVE: + wdt977_keepalive(); + return 0; + case WDIOC_SETTIMEOUT: if (get_user(new_timeout, uarg.i)) return -EFAULT; @@ -412,6 +409,9 @@ static long wdt977_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETTIMEOUT: return put_user(timeout, uarg.i); + default: + return -ENOTTY; + } } diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c index 5d922fd6eaf..fb8fc014485 100644 --- a/drivers/watchdog/wdt_pci.c +++ b/drivers/watchdog/wdt_pci.c @@ -428,8 +428,6 @@ static long wdtpci_ioctl(struct file *file, unsigned int cmd, #endif /* CONFIG_WDT_501_PCI */ switch (cmd) { - default: - return -ENOTTY; case WDIOC_GETSUPPORT: return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: @@ -449,7 +447,9 @@ static long wdtpci_ioctl(struct file *file, unsigned int cmd, /* Fall */ case WDIOC_GETTIMEOUT: return put_user(heartbeat, p); - } + default: + return -ENOTTY; + } } /** -- GitLab From 12b7a1523eda9cd72362fdda928ddb995ecdc06d Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Fri, 18 Jul 2008 19:59:48 +0000 Subject: [PATCH 0887/1024] [WATCHDOG] sbc8360.c - move stop code into a function Move the sbc8360.c watchdog stop code into a seperate function. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sbc8360.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/watchdog/sbc8360.c b/drivers/watchdog/sbc8360.c index c66fa6694fc..fd83dd052d8 100644 --- a/drivers/watchdog/sbc8360.c +++ b/drivers/watchdog/sbc8360.c @@ -231,6 +231,13 @@ static void sbc8360_ping(void) outb(wd_margin, SBC8360_BASETIME); } +/* stop watchdog */ +static void sbc8360_stop(void) +{ + /* De-activate the watchdog */ + outb(0, SBC8360_ENABLE); +} + /* Userspace pings kernel driver, or requests clean close */ static ssize_t sbc8360_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) @@ -271,7 +278,7 @@ static int sbc8360_open(struct inode *inode, struct file *file) static int sbc8360_close(struct inode *inode, struct file *file) { if (expect_close == 42) - outb(0, SBC8360_ENABLE); + sbc8360_stop(); else printk(KERN_CRIT PFX "SBC8360 device closed unexpectedly. SBC8360 will not stop!\n"); @@ -288,10 +295,9 @@ static int sbc8360_close(struct inode *inode, struct file *file) static int sbc8360_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code == SYS_DOWN || code == SYS_HALT) { - /* Disable the SBC8360 Watchdog */ - outb(0, SBC8360_ENABLE); - } + if (code == SYS_DOWN || code == SYS_HALT) + sbc8360_stop(); /* Disable the SBC8360 Watchdog */ + return NOTIFY_DONE; } -- GitLab From 3a35c27ac68cea19c252e127ec61099648eb4870 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 6 Aug 2008 10:08:56 -0700 Subject: [PATCH 0888/1024] docbook: fix v4l fatal filename error docproc: /var/linsrc/lin2627-rc2/drivers/media/video/videodev.c: No such file or directory make[1]: *** [Documentation/DocBook/videobook.xml] Error 1 Signed-off-by: Randy Dunlap cc: mchehab@infradead.org Signed-off-by: Linus Torvalds --- Documentation/DocBook/videobook.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/videobook.tmpl b/Documentation/DocBook/videobook.tmpl index 89817795e66..0bc25949b66 100644 --- a/Documentation/DocBook/videobook.tmpl +++ b/Documentation/DocBook/videobook.tmpl @@ -1648,7 +1648,7 @@ static struct video_buffer capture_fb; Public Functions Provided -!Edrivers/media/video/videodev.c +!Edrivers/media/video/v4l2-dev.c -- GitLab From 8bc5fb6abb670fa9079cd1994f016a39f99698fe Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 6 Aug 2008 14:06:29 +0100 Subject: [PATCH 0889/1024] Remove bogons from the iSeries console The iSeries driver calls into the n_tty ldisc code directly for some bizarre reason. I previously tagged this with a query but this actually does need fixing as n_tty methods when you have a different ldisc set are not a good thing to call. In n_tty mode this change should have no effect, the core tty layer has always called the ldisc ioctl method *anyway* and will call the one for the right ldisc. Signed-off-by: Alan Cox Acked-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- drivers/char/viocons.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c index 65fb848e1cc..f48892ba12f 100644 --- a/drivers/char/viocons.c +++ b/drivers/char/viocons.c @@ -705,10 +705,6 @@ static int viotty_ioctl(struct tty_struct *tty, struct file *file, case KDSKBLED: return 0; } - /* FIXME: WTF is this being called for ??? */ - lock_kernel(); - ret = n_tty_ioctl(tty, file, cmd, arg); - unlock_kernel(); return ret; } -- GitLab From d6606683a5e3dac35cb979c7195f54ed827567bd Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 6 Aug 2008 12:04:54 -0700 Subject: [PATCH 0890/1024] Revert duplicate "mm/hugetlb.c must #include " This reverts commit 7cb93181629c613ee2b8f4ffe3446f8003074842, since we did that patch twice, and the problem was already fixed earlier by 78a34ae29bf1c9df62a5bd0f0798b6c62a54d520. Reported-by: Andi Kleen Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 28a2980ee43..757ca983fd9 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -17,7 +17,7 @@ #include #include #include -#include + #include #include #include -- GitLab From 7a48bdd01b5cab9c043b4d42a3f377624d6259f2 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Wed, 6 Aug 2008 21:56:53 +0200 Subject: [PATCH 0891/1024] kbuild: fix O=.. build with arm With a make O=... build kbuild would only create the include2/asm symlink for archs that not yet had moved headers to include/$ARCH/include There is no longer any reason to avoid the symlink for archs that has moved their headers so create it unconditionally. This fixes arm because kbuild checked for include/asm-$ARCH/errno.h and that file was not present for arm but the platform files are not yet moved. Signed-off-by: Sam Ravnborg Cc: Russell King --- Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Makefile b/Makefile index ea413fa03e4..343ec4774b5 100644 --- a/Makefile +++ b/Makefile @@ -929,10 +929,10 @@ ifneq ($(KBUILD_SRC),) echo " in the '$(srctree)' directory.";\ /bin/false; \ fi; - $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi; - $(Q)if [ -e $(srctree)/include/asm-$(SRCARCH)/errno.h ]; then \ + $(Q)if [ ! -d include2 ]; then \ + mkdir -p include2; \ ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \ - fi + fi endif # prepare2 creates a makefile if using a separate output directory -- GitLab From 0758416325dc75e203ab974aa5e937bef7d2afef Mon Sep 17 00:00:00 2001 From: Erkki Lintunen Date: Wed, 6 Aug 2008 22:11:33 +0200 Subject: [PATCH 0892/1024] bugfix for scripts/patch-kernel in 2.6 sublevel stepping scripts/patch-kernel script can't patch a tree, say, from 2.6.25 to 2.6.26.1, because of a wrong comparison in context of patching 2.6.x base. Fix it. Acked-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg --- scripts/patch-kernel | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/scripts/patch-kernel b/scripts/patch-kernel index ece46ef0ba5..46a59cae3a0 100755 --- a/scripts/patch-kernel +++ b/scripts/patch-kernel @@ -213,6 +213,7 @@ fi if [ $stopvers != "default" ]; then STOPSUBLEVEL=`echo $stopvers | cut -d. -f3` STOPEXTRA=`echo $stopvers | cut -d. -f4` + STOPFULLVERSION=${stopvers%%.$STOPEXTRA} #echo "#___STOPSUBLEVEL=/$STOPSUBLEVEL/, STOPEXTRA=/$STOPEXTRA/" else STOPSUBLEVEL=9999 @@ -249,7 +250,7 @@ while : # incrementing SUBLEVEL (s in v.p.s) do CURRENTFULLVERSION="$VERSION.$PATCHLEVEL.$SUBLEVEL" EXTRAVER= - if [ $stopvers = $CURRENTFULLVERSION ]; then + if [ $STOPFULLVERSION = $CURRENTFULLVERSION ]; then echo "Stopping at $CURRENTFULLVERSION base as requested." break fi -- GitLab From 0b0de144333fca335a0111a6f9c59176ad43ba0a Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Mon, 4 Aug 2008 13:31:32 -0400 Subject: [PATCH 0893/1024] Kconfig: Extend "menuconfig" for modules to simplify Kconfig file Given that the init/Kconfig file uses a "menuconfig" directive for modules already, might as well wrap all the submenu entries in an "if" to toss all those dependencies. Signed-off-by: Robert P. J. Day Acked-by: Randy Dunlap Signed-off-by: Sam Ravnborg --- init/Kconfig | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/init/Kconfig b/init/Kconfig index 7e6dae1ae72..b678803decc 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -845,9 +845,10 @@ menuconfig MODULES If unsure, say Y. +if MODULES + config MODULE_FORCE_LOAD bool "Forced module loading" - depends on MODULES default n help Allow loading of modules without version information (ie. modprobe @@ -856,7 +857,6 @@ config MODULE_FORCE_LOAD config MODULE_UNLOAD bool "Module unloading" - depends on MODULES help Without this option you will not be able to unload any modules (note that some modules may not be unloadable @@ -875,7 +875,6 @@ config MODULE_FORCE_UNLOAD config MODVERSIONS bool "Module versioning support" - depends on MODULES help Usually, you have to use modules compiled with your kernel. Saying Y here makes it sometimes possible to use modules @@ -886,7 +885,6 @@ config MODVERSIONS config MODULE_SRCVERSION_ALL bool "Source checksum for all modules" - depends on MODULES help Modules which contain a MODULE_VERSION get an extra "srcversion" field inserted into their modinfo section, which contains a @@ -898,11 +896,12 @@ config MODULE_SRCVERSION_ALL config KMOD def_bool y - depends on MODULES help This is being removed soon. These days, CONFIG_MODULES implies CONFIG_KMOD, so use that instead. +endif # MODULES + config STOP_MACHINE bool default y -- GitLab From 64a99d2a8c3ed5c4e39f3ae1cc682aa8fd3977fc Mon Sep 17 00:00:00 2001 From: Denis ChengRq Date: Mon, 4 Aug 2008 09:51:40 +0800 Subject: [PATCH 0894/1024] kbuild: a better way to generate cscope database change It's a problem about cscope target of kernel Makefile, and the cscope plugin of emacs: 1. `make cscope` will generate cscope.files cscope.{in,po,}.out; 2. the cscope plugin expect a cscope.out.{in,po,}; 3. the default `cscope -b` would generate cscope.{in,po,}.out; There are three approach to solve it: 1. modify the cscope C code; 2. modify the cscope emacs plugin lisp code; 3. modify the Makefile; I have tried to communicate with the cscope upstream, but later I realize the third approach is most meaningful. Signed-off-by: Sam Ravnborg --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 343ec4774b5..f3e206509ee 100644 --- a/Makefile +++ b/Makefile @@ -1492,7 +1492,7 @@ quiet_cmd_cscope-file = FILELST cscope.files cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files quiet_cmd_cscope = MAKE cscope.out - cmd_cscope = cscope -b + cmd_cscope = cscope -b -f cscope.out cscope: FORCE $(call cmd,cscope-file) -- GitLab From 7944d3a5a70ee5c1904ed1e8b1d71ff0af2854d9 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 6 Aug 2008 20:19:41 +0000 Subject: [PATCH 0895/1024] [WATCHDOG] more coding style clean-up's More coding style clean-up's. Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Kconfig | 2 +- drivers/watchdog/Makefile | 2 +- drivers/watchdog/acquirewdt.c | 2 +- drivers/watchdog/advantechwdt.c | 17 +++---- drivers/watchdog/alim1535_wdt.c | 2 +- drivers/watchdog/alim7101_wdt.c | 4 +- drivers/watchdog/ar7_wdt.c | 4 +- drivers/watchdog/at32ap700x_wdt.c | 2 +- drivers/watchdog/eurotechwdt.c | 8 ++-- drivers/watchdog/geodewdt.c | 62 +++++++++++--------------- drivers/watchdog/hpwdt.c | 4 +- drivers/watchdog/i6300esb.c | 34 +++++++------- drivers/watchdog/iTCO_vendor_support.c | 10 ++--- drivers/watchdog/iTCO_wdt.c | 10 ++--- drivers/watchdog/ib700wdt.c | 12 ++--- drivers/watchdog/ibmasr.c | 4 +- drivers/watchdog/iop_wdt.c | 2 +- drivers/watchdog/it8712f_wdt.c | 2 +- drivers/watchdog/ixp4xx_wdt.c | 13 +++--- drivers/watchdog/mpc5200_wdt.c | 6 +-- drivers/watchdog/mpcore_wdt.c | 8 ++-- drivers/watchdog/mtx-1_wdt.c | 4 +- drivers/watchdog/omap_wdt.c | 2 +- drivers/watchdog/pc87413_wdt.c | 38 ++++++++-------- drivers/watchdog/pcwd.c | 6 +-- drivers/watchdog/pcwd_pci.c | 28 +++++------- drivers/watchdog/pcwd_usb.c | 61 ++++++++++++------------- drivers/watchdog/rm9k_wdt.c | 13 +++--- drivers/watchdog/sb_wdog.c | 4 +- drivers/watchdog/sbc60xxwdt.c | 4 +- drivers/watchdog/sc1200wdt.c | 2 +- drivers/watchdog/scx200_wdt.c | 2 +- drivers/watchdog/smsc37b787_wdt.c | 4 +- drivers/watchdog/txx9wdt.c | 2 +- drivers/watchdog/w83627hf_wdt.c | 9 ++-- drivers/watchdog/w83697hf_wdt.c | 11 +++-- drivers/watchdog/wafer5823wdt.c | 20 ++++----- drivers/watchdog/wd501p.h | 2 +- drivers/watchdog/wdrtas.c | 2 +- drivers/watchdog/wdt_pci.c | 2 +- 40 files changed, 199 insertions(+), 227 deletions(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 50d44b4b466..32b9fe15364 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -463,7 +463,7 @@ config PC87413_WDT module will be called pc87413_wdt. Most people will say N. - + config 60XX_WDT tristate "SBC-60XX Watchdog Timer" depends on X86 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index cdd674ffaa2..049c9189569 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -92,7 +92,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o # MIPS Architecture obj-$(CONFIG_INDYDOG) += indydog.o -obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o +obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o obj-$(CONFIG_AR7_WDT) += ar7_wdt.o diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c index 7a5c69421f1..6e46a551395 100644 --- a/drivers/watchdog/acquirewdt.c +++ b/drivers/watchdog/acquirewdt.c @@ -126,7 +126,7 @@ static ssize_t acq_write(struct file *file, const char __user *buf, if (!nowayout) { size_t i; /* note: just in case someone wrote the magic character - * five months ago... */ + five months ago... */ expect_close = 0; /* scan to see whether or not we got the magic character */ diff --git a/drivers/watchdog/advantechwdt.c b/drivers/watchdog/advantechwdt.c index bfec1660047..a5110f93a75 100644 --- a/drivers/watchdog/advantechwdt.c +++ b/drivers/watchdog/advantechwdt.c @@ -47,7 +47,8 @@ #define WATCHDOG_NAME "Advantech WDT" #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ -static struct platform_device *advwdt_platform_device; /* the watchdog platform device */ +/* the watchdog platform device */ +static struct platform_device *advwdt_platform_device; static unsigned long advwdt_is_open; static char adv_expect_close; @@ -120,7 +121,7 @@ static ssize_t advwdt_write(struct file *file, const char __user *buf, for (i = 0; i != count; i++) { char c; - if (get_user(c, buf+i)) + if (get_user(c, buf + i)) return -EFAULT; if (c == 'V') adv_expect_close = 42; @@ -199,8 +200,7 @@ static int advwdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static int -advwdt_close(struct inode *inode, struct file *file) +static int advwdt_close(struct inode *inode, struct file *file) { if (adv_expect_close == 42) { advwdt_disable(); @@ -288,9 +288,9 @@ unreg_stop: static int __devexit advwdt_remove(struct platform_device *dev) { misc_deregister(&advwdt_miscdev); - release_region(wdt_start,1); - if(wdt_stop != wdt_start) - release_region(wdt_stop,1); + release_region(wdt_start, 1); + if (wdt_stop != wdt_start) + release_region(wdt_stop, 1); return 0; } @@ -315,7 +315,8 @@ static int __init advwdt_init(void) { int err; - printk(KERN_INFO "WDT driver for Advantech single board computer initialising.\n"); + printk(KERN_INFO + "WDT driver for Advantech single board computer initialising.\n"); err = platform_driver_register(&advwdt_driver); if (err) diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c index dfa11d19043..2a7690ecf97 100644 --- a/drivers/watchdog/alim1535_wdt.c +++ b/drivers/watchdog/alim1535_wdt.c @@ -153,7 +153,7 @@ static ssize_t ali_write(struct file *file, const char __user *data, the magic character */ for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') ali_expect_release = 42; diff --git a/drivers/watchdog/alim7101_wdt.c b/drivers/watchdog/alim7101_wdt.c index 049c9122e40..a045ef86943 100644 --- a/drivers/watchdog/alim7101_wdt.c +++ b/drivers/watchdog/alim7101_wdt.c @@ -125,7 +125,7 @@ static void wdt_timer_ping(unsigned long data) static void wdt_change(int writeval) { - char tmp; + char tmp; pci_read_config_byte(alim7101_pmu, ALI_7101_WDT, &tmp); if (writeval == WDT_ENABLE) { @@ -198,7 +198,7 @@ static ssize_t fop_write(struct file *file, const char __user *buf, /* now scan */ for (ofs = 0; ofs != count; ofs++) { char c; - if (get_user(c, buf+ofs)) + if (get_user(c, buf + ofs)) return -EFAULT; if (c == 'V') wdt_expect_close = 42; diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c index 9a81a205ef7..55dcbfe2bb7 100644 --- a/drivers/watchdog/ar7_wdt.c +++ b/drivers/watchdog/ar7_wdt.c @@ -213,7 +213,7 @@ static int ar7_wdt_notify_sys(struct notifier_block *this, } static struct notifier_block ar7_wdt_notifier = { - .notifier_call = ar7_wdt_notify_sys + .notifier_call = ar7_wdt_notify_sys, }; static ssize_t ar7_wdt_write(struct file *file, const char *data, @@ -230,7 +230,7 @@ static ssize_t ar7_wdt_write(struct file *file, const char *data, expect_close = 0; for (i = 0; i < len; ++i) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = 1; diff --git a/drivers/watchdog/at32ap700x_wdt.c b/drivers/watchdog/at32ap700x_wdt.c index 4538b57f451..e8ae638e580 100644 --- a/drivers/watchdog/at32ap700x_wdt.c +++ b/drivers/watchdog/at32ap700x_wdt.c @@ -283,7 +283,7 @@ static ssize_t at32_wdt_write(struct file *file, const char __user *data, */ for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_release = 42; diff --git a/drivers/watchdog/eurotechwdt.c b/drivers/watchdog/eurotechwdt.c index 96250118fd7..bbd14e34319 100644 --- a/drivers/watchdog/eurotechwdt.c +++ b/drivers/watchdog/eurotechwdt.c @@ -210,7 +210,7 @@ size_t count, loff_t *ppos) for (i = 0; i != count; i++) { char c; - if (get_user(c, buf+i)) + if (get_user(c, buf + i)) return -EFAULT; if (c == 'V') eur_expect_close = 42; @@ -360,10 +360,8 @@ static int eurwdt_release(struct inode *inode, struct file *file) static int eurwdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code == SYS_DOWN || code == SYS_HALT) { - /* Turn the card off */ - eurwdt_disable_timer(); - } + if (code == SYS_DOWN || code == SYS_HALT) + eurwdt_disable_timer(); /* Turn the card off */ return NOTIFY_DONE; } diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index 04b861cfdf0..614a5c7017b 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -77,27 +77,24 @@ static int geodewdt_set_heartbeat(int val) return 0; } -static int -geodewdt_open(struct inode *inode, struct file *file) +static int geodewdt_open(struct inode *inode, struct file *file) { - if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags)) - return -EBUSY; + if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags)) + return -EBUSY; - if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags)) - __module_get(THIS_MODULE); + if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags)) + __module_get(THIS_MODULE); geodewdt_ping(); - return nonseekable_open(inode, file); + return nonseekable_open(inode, file); } -static int -geodewdt_release(struct inode *inode, struct file *file) +static int geodewdt_release(struct inode *inode, struct file *file) { if (safe_close) { geodewdt_disable(); module_put(THIS_MODULE); - } - else { + } else { printk(KERN_CRIT "Unexpected close - watchdog is not stopping.\n"); geodewdt_ping(); @@ -109,11 +106,10 @@ geodewdt_release(struct inode *inode, struct file *file) return 0; } -static ssize_t -geodewdt_write(struct file *file, const char __user *data, size_t len, - loff_t *ppos) +static ssize_t geodewdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) { - if(len) { + if (len) { if (!nowayout) { size_t i; safe_close = 0; @@ -134,9 +130,8 @@ geodewdt_write(struct file *file, const char __user *data, size_t len, return len; } -static int -geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) +static int geodewdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) { void __user *argp = (void __user *)arg; int __user *p = argp; @@ -147,7 +142,7 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, | WDIOF_MAGICCLOSE, .firmware_version = 1, .identity = WATCHDOG_NAME, - }; + }; switch (cmd) { case WDIOC_GETSUPPORT: @@ -200,22 +195,21 @@ geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, } static const struct file_operations geodewdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = geodewdt_write, - .ioctl = geodewdt_ioctl, - .open = geodewdt_open, - .release = geodewdt_release, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = geodewdt_write, + .ioctl = geodewdt_ioctl, + .open = geodewdt_open, + .release = geodewdt_release, }; static struct miscdevice geodewdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", - .fops = &geodewdt_fops + .fops = &geodewdt_fops, }; -static int __devinit -geodewdt_probe(struct platform_device *dev) +static int __devinit geodewdt_probe(struct platform_device *dev) { int ret, timer; @@ -246,15 +240,13 @@ geodewdt_probe(struct platform_device *dev) return ret; } -static int __devexit -geodewdt_remove(struct platform_device *dev) +static int __devexit geodewdt_remove(struct platform_device *dev) { misc_deregister(&geodewdt_miscdev); return 0; } -static void -geodewdt_shutdown(struct platform_device *dev) +static void geodewdt_shutdown(struct platform_device *dev) { geodewdt_disable(); } @@ -269,8 +261,7 @@ static struct platform_driver geodewdt_driver = { }, }; -static int __init -geodewdt_init(void) +static int __init geodewdt_init(void) { int ret; @@ -290,8 +281,7 @@ err: return ret; } -static void __exit -geodewdt_exit(void) +static void __exit geodewdt_exit(void) { platform_device_unregister(geodewdt_platform_device); platform_driver_unregister(&geodewdt_driver); diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 7ea8f3e844f..d039d5f2fd1 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -405,7 +405,7 @@ static int __devinit detect_cru_service(void) dmi_walk(dmi_find_cru); /* if cru_rom_addr has been set then we found a CRU service */ - return ((cru_rom_addr != NULL)? 0: -ENODEV); + return ((cru_rom_addr != NULL) ? 0: -ENODEV); } /* ------------------------------------------------------------------------- */ @@ -533,7 +533,7 @@ static ssize_t hpwdt_write(struct file *file, const char __user *data, /* scan to see whether or not we got the magic char. */ for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_release = 42; diff --git a/drivers/watchdog/i6300esb.c b/drivers/watchdog/i6300esb.c index c768cb71890..c13383f7fcb 100644 --- a/drivers/watchdog/i6300esb.c +++ b/drivers/watchdog/i6300esb.c @@ -9,18 +9,18 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * based on i810-tco.c which is in turn based on softdog.c + * based on i810-tco.c which is in turn based on softdog.c * - * The timer is implemented in the following I/O controller hubs: - * (See the intel documentation on http://developer.intel.com.) - * 6300ESB chip : document number 300641-003 + * The timer is implemented in the following I/O controller hubs: + * (See the intel documentation on http://developer.intel.com.) + * 6300ESB chip : document number 300641-003 * * 2004YYZZ Ross Biro * Initial version 0.01 * 2004YYZZ Ross Biro - * Version 0.02 + * Version 0.02 * 20050210 David Härdeman - * Ported driver to kernel 2.6 + * Ported driver to kernel 2.6 */ /* @@ -108,7 +108,8 @@ MODULE_PARM_DESC(nowayout, * reload register. After this the appropriate registers can be written * to once before they need to be unlocked again. */ -static inline void esb_unlock_registers(void) { +static inline void esb_unlock_registers(void) +{ writeb(ESB_UNLOCK1, ESB_RELOAD_REG); writeb(ESB_UNLOCK2, ESB_RELOAD_REG); } @@ -169,7 +170,7 @@ static int esb_timer_set_heartbeat(int time) /* Write timer 2 */ esb_unlock_registers(); - writel(val, ESB_TIMER2_REG); + writel(val, ESB_TIMER2_REG); /* Reload */ esb_unlock_registers(); @@ -196,7 +197,7 @@ static int esb_timer_read(void) } /* - * /dev/watchdog handling + * /dev/watchdog handling */ static int esb_open(struct inode *inode, struct file *file) @@ -242,7 +243,7 @@ static ssize_t esb_write(struct file *file, const char __user *data, /* scan to see whether or not we got the magic character */ for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') esb_expect_close = 42; @@ -262,11 +263,11 @@ static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) void __user *argp = (void __user *)arg; int __user *p = argp; static struct watchdog_info ident = { - .options = WDIOF_SETTIMEOUT | + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, - .firmware_version = 0, - .identity = ESB_MODULE_NAME, + .firmware_version = 0, + .identity = ESB_MODULE_NAME, }; switch (cmd) { @@ -324,10 +325,9 @@ static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) static int esb_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code == SYS_DOWN || code == SYS_HALT) { - /* Turn the WDT off */ - esb_timer_stop(); - } + if (code == SYS_DOWN || code == SYS_HALT) + esb_timer_stop(); /* Turn the WDT off */ + return NOTIFY_DONE; } diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index e9e1f7b3fb7..ca344a85eb9 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -18,9 +18,9 @@ */ /* Module and version information */ -#define DRV_NAME "iTCO_vendor_support" -#define DRV_VERSION "1.01" -#define DRV_RELDATE "11-Nov-2006" +#define DRV_NAME "iTCO_vendor_support" +#define DRV_VERSION "1.01" +#define DRV_RELDATE "11-Nov-2006" #define PFX DRV_NAME ": " /* Includes */ @@ -37,8 +37,8 @@ /* iTCO defines */ #define SMI_EN acpibase + 0x30 /* SMI Control and Enable Register */ -#define TCOBASE acpibase + 0x60 /* TCO base address */ -#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ +#define TCOBASE acpibase + 0x60 /* TCO base address */ +#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ /* List of vendor support modes */ /* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */ diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index b1876643663..bfb93bc2ca9 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -55,9 +55,9 @@ */ /* Module and version information */ -#define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.03" -#define DRV_RELDATE "30-Apr-2008" +#define DRV_NAME "iTCO_wdt" +#define DRV_VERSION "1.03" +#define DRV_RELDATE "30-Apr-2008" #define PFX DRV_NAME ": " /* Includes */ @@ -107,7 +107,7 @@ enum iTCO_chipsets { TCO_ICH9, /* ICH9 */ TCO_ICH9R, /* ICH9R */ TCO_ICH9DH, /* ICH9DH */ - TCO_ICH9DO, /* ICH9DO */ + TCO_ICH9DO, /* ICH9DO */ TCO_631XESB, /* 631xESB/632xESB */ }; @@ -497,7 +497,7 @@ static ssize_t iTCO_wdt_write(struct file *file, const char __user *data, magic character */ for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_release = 42; diff --git a/drivers/watchdog/ib700wdt.c b/drivers/watchdog/ib700wdt.c index 6aa914e5caf..05a28106e8e 100644 --- a/drivers/watchdog/ib700wdt.c +++ b/drivers/watchdog/ib700wdt.c @@ -129,8 +129,7 @@ MODULE_PARM_DESC(nowayout, * Watchdog Operations */ -static void -ibwdt_ping(void) +static void ibwdt_ping(void) { spin_lock(&ibwdt_lock); @@ -140,16 +139,14 @@ ibwdt_ping(void) spin_unlock(&ibwdt_lock); } -static void -ibwdt_disable(void) +static void ibwdt_disable(void) { spin_lock(&ibwdt_lock); outb_p(0, WDT_STOP); spin_unlock(&ibwdt_lock); } -static int -ibwdt_set_heartbeat(int t) +static int ibwdt_set_heartbeat(int t) { int i; @@ -263,8 +260,7 @@ static int ibwdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static int -ibwdt_close(struct inode *inode, struct file *file) +static int ibwdt_close(struct inode *inode, struct file *file) { if (expect_close == 42) { ibwdt_disable(); diff --git a/drivers/watchdog/ibmasr.c b/drivers/watchdog/ibmasr.c index 0b549f3ff91..b82405cfb4c 100644 --- a/drivers/watchdog/ibmasr.c +++ b/drivers/watchdog/ibmasr.c @@ -275,7 +275,7 @@ static long asr_ioctl(struct file *file, unsigned int cmd, unsigned long arg) static const struct watchdog_info ident = { .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, - .identity = "IBM ASR" + .identity = "IBM ASR", }; void __user *argp = (void __user *)arg; int __user *p = argp; @@ -345,7 +345,7 @@ static int asr_release(struct inode *inode, struct file *file) static const struct file_operations asr_fops = { .owner = THIS_MODULE, - .llseek = no_llseek, + .llseek = no_llseek, .write = asr_write, .unlocked_ioctl = asr_ioctl, .open = asr_open, diff --git a/drivers/watchdog/iop_wdt.c b/drivers/watchdog/iop_wdt.c index e0d0a90ea10..8278b13f77c 100644 --- a/drivers/watchdog/iop_wdt.c +++ b/drivers/watchdog/iop_wdt.c @@ -241,7 +241,7 @@ static int __init iop_wdt_init(void) with an open */ ret = misc_register(&iop_wdt_miscdev); if (ret == 0) - printk("iop watchdog timer: timeout %lu sec\n", + printk(KERN_INFO "iop watchdog timer: timeout %lu sec\n", iop_watchdog_timeout()); return ret; diff --git a/drivers/watchdog/it8712f_wdt.c b/drivers/watchdog/it8712f_wdt.c index c1db74f6e31..2270ee07c01 100644 --- a/drivers/watchdog/it8712f_wdt.c +++ b/drivers/watchdog/it8712f_wdt.c @@ -221,7 +221,7 @@ static ssize_t it8712f_wdt_write(struct file *file, const char __user *data, expect_close = 0; for (i = 0; i < len; ++i) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = 42; diff --git a/drivers/watchdog/ixp4xx_wdt.c b/drivers/watchdog/ixp4xx_wdt.c index b94713e4773..ef3157dc9ac 100644 --- a/drivers/watchdog/ixp4xx_wdt.c +++ b/drivers/watchdog/ixp4xx_wdt.c @@ -157,8 +157,7 @@ static int ixp4xx_wdt_release(struct inode *inode, struct file *file) } -static const struct file_operations ixp4xx_wdt_fops = -{ +static const struct file_operations ixp4xx_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, .write = ixp4xx_wdt_write, @@ -167,8 +166,7 @@ static const struct file_operations ixp4xx_wdt_fops = .release = ixp4xx_wdt_release, }; -static struct miscdevice ixp4xx_wdt_miscdev = -{ +static struct miscdevice ixp4xx_wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", .fops = &ixp4xx_wdt_fops, @@ -181,8 +179,8 @@ static int __init ixp4xx_wdt_init(void) asm("mrc p15, 0, %0, cr0, cr0, 0;" : "=r"(processor_id) :); if (!(processor_id & 0xf) && !cpu_is_ixp46x()) { - printk("IXP4XXX Watchdog: Rev. A0 IXP42x CPU detected - " - "watchdog disabled\n"); + printk(KERN_ERR "IXP4XXX Watchdog: Rev. A0 IXP42x CPU detected" + " - watchdog disabled\n"); return -ENODEV; } @@ -191,7 +189,8 @@ static int __init ixp4xx_wdt_init(void) WDIOF_CARDRESET : 0; ret = misc_register(&ixp4xx_wdt_miscdev); if (ret == 0) - printk("IXP4xx Watchdog Timer: heartbeat %d sec\n", heartbeat); + printk(KERN_INFO "IXP4xx Watchdog Timer: heartbeat %d sec\n", + heartbeat); return ret; } diff --git a/drivers/watchdog/mpc5200_wdt.c b/drivers/watchdog/mpc5200_wdt.c index ce1811d5d6b..db91892558f 100644 --- a/drivers/watchdog/mpc5200_wdt.c +++ b/drivers/watchdog/mpc5200_wdt.c @@ -164,7 +164,7 @@ static int mpc5200_wdt_release(struct inode *inode, struct file *file) static const struct file_operations mpc5200_wdt_fops = { .owner = THIS_MODULE, .write = mpc5200_wdt_write, - .ioctl = mpc5200_wdt_ioctl, + .unlocked_ioctl = mpc5200_wdt_ioctl, .open = mpc5200_wdt_open, .release = mpc5200_wdt_release, }; @@ -219,9 +219,9 @@ static int mpc5200_wdt_probe(struct of_device *op, return 0; iounmap(wdt->regs); - out_release: +out_release: release_mem_region(wdt->mem.start, size); - out_free: +out_free: kfree(wdt); return err; } diff --git a/drivers/watchdog/mpcore_wdt.c b/drivers/watchdog/mpcore_wdt.c index 3c4f95599c6..2a9bfa81f9d 100644 --- a/drivers/watchdog/mpcore_wdt.c +++ b/drivers/watchdog/mpcore_wdt.c @@ -377,13 +377,13 @@ static int __devinit mpcore_wdt_probe(struct platform_device *dev) return 0; - err_irq: +err_irq: misc_deregister(&mpcore_wdt_miscdev); - err_misc: +err_misc: iounmap(wdt->base); - err_free: +err_free: kfree(wdt); - err_out: +err_out: return ret; } diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index f820b82da7c..b4b7b0a4c11 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -191,14 +191,14 @@ static const struct file_operations mtx1_wdt_fops = { .unlocked_ioctl = mtx1_wdt_ioctl, .open = mtx1_wdt_open, .write = mtx1_wdt_write, - .release = mtx1_wdt_release + .release = mtx1_wdt_release, }; static struct miscdevice mtx1_wdt_misc = { .minor = WATCHDOG_MINOR, .name = "watchdog", - .fops = &mtx1_wdt_fops + .fops = &mtx1_wdt_fops, }; diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 7beb21ce1de..6f5420f478a 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c @@ -245,7 +245,7 @@ static const struct file_operations omap_wdt_fops = { static struct miscdevice omap_wdt_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", - .fops = &omap_wdt_fops + .fops = &omap_wdt_fops, }; static int __init omap_wdt_probe(struct platform_device *pdev) diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c index 5fc7f134995..e91ada72da1 100644 --- a/drivers/watchdog/pc87413_wdt.c +++ b/drivers/watchdog/pc87413_wdt.c @@ -38,7 +38,7 @@ /* #define DEBUG 1 */ -#define DEFAULT_TIMEOUT 1 /* 1 minute */ +#define DEFAULT_TIMEOUT 1 /* 1 minute */ #define MAX_TIMEOUT 255 #define VERSION "1.1" @@ -46,17 +46,17 @@ #define PFX MODNAME ": " #define DPFX MODNAME " - DEBUG: " -#define WDT_INDEX_IO_PORT (io+0) /* I/O port base (index register) */ +#define WDT_INDEX_IO_PORT (io+0) /* I/O port base (index register) */ #define WDT_DATA_IO_PORT (WDT_INDEX_IO_PORT+1) #define SWC_LDN 0x04 -#define SIOCFG2 0x22 /* Serial IO register */ -#define WDCTL 0x10 /* Watchdog-Timer-Controll-Register */ -#define WDTO 0x11 /* Watchdog timeout register */ -#define WDCFG 0x12 /* Watchdog config register */ +#define SIOCFG2 0x22 /* Serial IO register */ +#define WDCTL 0x10 /* Watchdog-Timer-Controll-Register */ +#define WDTO 0x11 /* Watchdog timeout register */ +#define WDCFG 0x12 /* Watchdog config register */ -static int io = 0x2E; /* Address used on Portwell Boards */ +static int io = 0x2E; /* Address used on Portwell Boards */ -static int timeout = DEFAULT_TIMEOUT; /* timeout value */ +static int timeout = DEFAULT_TIMEOUT; /* timeout value */ static unsigned long timer_enabled; /* is the timer enabled? */ static char expect_close; /* is the close expected? */ @@ -99,14 +99,14 @@ static inline void pc87413_enable_swc(void) /* Step 2: Enable SWC functions */ - outb_p(0x07, WDT_INDEX_IO_PORT); /* Point SWC_LDN (LDN=4) */ + outb_p(0x07, WDT_INDEX_IO_PORT); /* Point SWC_LDN (LDN=4) */ outb_p(SWC_LDN, WDT_DATA_IO_PORT); - outb_p(0x30, WDT_INDEX_IO_PORT); /* Read Index 0x30 First */ + outb_p(0x30, WDT_INDEX_IO_PORT); /* Read Index 0x30 First */ cr_data = inb(WDT_DATA_IO_PORT); - cr_data |= 0x01; /* Set Bit0 to 1 */ + cr_data |= 0x01; /* Set Bit0 to 1 */ outb_p(0x30, WDT_INDEX_IO_PORT); - outb_p(cr_data, WDT_DATA_IO_PORT); /* Index0x30_bit0P1 */ + outb_p(cr_data, WDT_DATA_IO_PORT); /* Index0x30_bit0P1 */ #ifdef DEBUG printk(KERN_INFO DPFX "pc87413 - Enable SWC functions\n"); @@ -122,10 +122,10 @@ static inline unsigned int pc87413_get_swc_base(void) /* Step 3: Read SWC I/O Base Address */ - outb_p(0x60, WDT_INDEX_IO_PORT); /* Read Index 0x60 */ + outb_p(0x60, WDT_INDEX_IO_PORT); /* Read Index 0x60 */ addr_h = inb(WDT_DATA_IO_PORT); - outb_p(0x61, WDT_INDEX_IO_PORT); /* Read Index 0x61 */ + outb_p(0x61, WDT_INDEX_IO_PORT); /* Read Index 0x61 */ addr_l = inb(WDT_DATA_IO_PORT); @@ -374,7 +374,7 @@ static ssize_t pc87413_write(struct file *file, const char __user *data, magic character */ for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -413,7 +413,7 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd, WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, .firmware_version = 1, - .identity = "PC87413(HF/F) watchdog" + .identity = "PC87413(HF/F) watchdog", }; uarg.i = (int __user *)arg; @@ -507,7 +507,7 @@ static struct notifier_block pc87413_notifier = { static struct miscdevice pc87413_miscdev = { .minor = WATCHDOG_MINOR, .name = "watchdog", - .fops = &pc87413_fops + .fops = &pc87413_fops, }; /* -- Module init functions -------------------------------------*/ @@ -567,9 +567,9 @@ static void __exit pc87413_exit(void) misc_deregister(&pc87413_miscdev); unregister_reboot_notifier(&pc87413_notifier); - /* release_region(io,2); */ + /* release_region(io, 2); */ - printk(MODNAME " watchdog component driver removed.\n"); + printk(KERN_INFO MODNAME " watchdog component driver removed.\n"); } module_init(pc87413_init); diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c index 134386a8885..3b0ddc7fcf3 100644 --- a/drivers/watchdog/pcwd.c +++ b/drivers/watchdog/pcwd.c @@ -145,7 +145,7 @@ static int pcwd_ioports[] = { 0x270, 0x350, 0x370, 0x000 }; #define CMD_ISA_RESET_RELAYS 0x0D /* Watchdog's Dip Switch heartbeat values */ -static const int heartbeat_tbl [] = { +static const int heartbeat_tbl[] = { 20, /* OFF-OFF-OFF = 20 Sec */ 40, /* OFF-OFF-ON = 40 Sec */ 60, /* OFF-ON-OFF = 1 Min */ @@ -272,7 +272,7 @@ static int set_command_mode(void) printk(KERN_DEBUG PFX "command_mode=%d\n", pcwd_private.command_mode); - return(found); + return found; } static void unset_command_mode(void) @@ -325,7 +325,7 @@ static inline int pcwd_get_option_switches(void) } unset_command_mode(); - return(option_switches); + return option_switches; } static void pcwd_show_card_info(void) diff --git a/drivers/watchdog/pcwd_pci.c b/drivers/watchdog/pcwd_pci.c index 2617129a7cc..90eb1d4271d 100644 --- a/drivers/watchdog/pcwd_pci.c +++ b/drivers/watchdog/pcwd_pci.c @@ -96,7 +96,7 @@ #define CMD_GET_CLEAR_RESET_COUNT 0x84 /* Watchdog's Dip Switch heartbeat values */ -static const int heartbeat_tbl [] = { +static const int heartbeat_tbl[] = { 5, /* OFF-OFF-OFF = 5 Sec */ 10, /* OFF-OFF-ON = 10 Sec */ 30, /* OFF-ON-OFF = 30 Sec */ @@ -219,11 +219,10 @@ static void pcipcwd_show_card_info(void) int option_switches; got_fw_rev = send_command(CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor); - if (got_fw_rev) { + if (got_fw_rev) sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor); - } else { + else sprintf(fw_ver_str, ""); - } /* Get switch settings */ option_switches = pcipcwd_get_option_switches(); @@ -330,7 +329,7 @@ static int pcipcwd_get_status(int *status) { int control_status; - *status=0; + *status = 0; control_status = inb_p(pcipcwd_private.io_addr + 1); if (control_status & WD_PCI_WTRP) *status |= WDIOF_CARDRESET; @@ -368,8 +367,8 @@ static int pcipcwd_clear_status(void) outb_p((control_status & WD_PCI_R2DS) | WD_PCI_WTRP, pcipcwd_private.io_addr + 1); /* clear reset counter */ - msb=0; - reset_counter=0xff; + msb = 0; + reset_counter = 0xff; send_command(CMD_GET_CLEAR_RESET_COUNT, &msb, &reset_counter); if (debug >= DEBUG) { @@ -441,7 +440,7 @@ static ssize_t pcipcwd_write(struct file *file, const char __user *data, /* scan to see whether or not we got the magic character */ for (i = 0; i != len; i++) { char c; - if(get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_release = 42; @@ -471,8 +470,7 @@ static long pcipcwd_ioctl(struct file *file, unsigned int cmd, switch (cmd) { case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, - sizeof (ident)) ? -EFAULT : 0; + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: { @@ -498,7 +496,7 @@ static long pcipcwd_ioctl(struct file *file, unsigned int cmd, { int new_options, retval = -EINVAL; - if (get_user (new_options, p)) + if (get_user(new_options, p)) return -EFAULT; if (new_options & WDIOS_DISABLECARD) { @@ -600,7 +598,7 @@ static ssize_t pcipcwd_temp_read(struct file *file, char __user *data, if (pcipcwd_get_temperature(&temperature)) return -EFAULT; - if (copy_to_user (data, &temperature, 1)) + if (copy_to_user(data, &temperature, 1)) return -EFAULT; return 1; @@ -625,10 +623,8 @@ static int pcipcwd_temp_release(struct inode *inode, struct file *file) static int pcipcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code==SYS_DOWN || code==SYS_HALT) { - /* Turn the WDT off */ - pcipcwd_stop(); - } + if (code == SYS_DOWN || code == SYS_HALT) + pcipcwd_stop(); /* Turn the WDT off */ return NOTIFY_DONE; } diff --git a/drivers/watchdog/pcwd_usb.c b/drivers/watchdog/pcwd_usb.c index 8c582bc0588..c1685c942de 100644 --- a/drivers/watchdog/pcwd_usb.c +++ b/drivers/watchdog/pcwd_usb.c @@ -87,7 +87,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" _ #define USB_PCWD_PRODUCT_ID 0x1140 /* table of devices that work with this driver */ -static struct usb_device_id usb_pcwd_table [] = { +static struct usb_device_id usb_pcwd_table[] = { { USB_DEVICE(USB_PCWD_VENDOR_ID, USB_PCWD_PRODUCT_ID) }, { } /* Terminating entry */ }; @@ -109,7 +109,7 @@ MODULE_DEVICE_TABLE (usb, usb_pcwd_table); #define CMD_DISABLE_WATCHDOG CMD_ENABLE_WATCHDOG /* Watchdog's Dip Switch heartbeat values */ -static const int heartbeat_tbl [] = { +static const int heartbeat_tbl[] = { 5, /* OFF-OFF-OFF = 5 Sec */ 10, /* OFF-OFF-ON = 10 Sec */ 30, /* OFF-ON-OFF = 30 Sec */ @@ -129,15 +129,15 @@ static char expect_release; /* Structure to hold all of our device specific stuff */ struct usb_pcwd_private { - struct usb_device * udev; /* save off the usb device pointer */ - struct usb_interface * interface; /* the interface for this device */ + struct usb_device *udev; /* save off the usb device pointer */ + struct usb_interface *interface; /* the interface for this device */ unsigned int interface_number; /* the interface number used for cmd's */ - unsigned char * intr_buffer; /* the buffer to intr data */ + unsigned char *intr_buffer; /* the buffer to intr data */ dma_addr_t intr_dma; /* the dma address for the intr buffer */ size_t intr_size; /* the size of the intr buffer */ - struct urb * intr_urb; /* the urb used for the intr pipe */ + struct urb *intr_urb; /* the urb used for the intr pipe */ unsigned char cmd_command; /* The command that is reported back */ unsigned char cmd_data_msb; /* The data MSB that is reported back */ @@ -153,8 +153,8 @@ static struct usb_pcwd_private *usb_pcwd_device; static DEFINE_MUTEX(disconnect_mutex); /* local function prototypes */ -static int usb_pcwd_probe (struct usb_interface *interface, const struct usb_device_id *id); -static void usb_pcwd_disconnect (struct usb_interface *interface); +static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_device_id *id); +static void usb_pcwd_disconnect(struct usb_interface *interface); /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver usb_pcwd_driver = { @@ -194,10 +194,10 @@ static void usb_pcwd_intr_done(struct urb *urb) usb_pcwd->cmd_data_lsb = data[2]; /* notify anyone waiting that the cmd has finished */ - atomic_set (&usb_pcwd->cmd_received, 1); + atomic_set(&usb_pcwd->cmd_received, 1); resubmit: - retval = usb_submit_urb (urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) printk(KERN_ERR PFX "can't resubmit intr, usb_submit_urb failed with result %d\n", retval); @@ -223,7 +223,7 @@ static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd, unsigned cha dbg("sending following data cmd=0x%02x msb=0x%02x lsb=0x%02x", buf[0], buf[1], buf[2]); - atomic_set (&usb_pcwd->cmd_received, 0); + atomic_set(&usb_pcwd->cmd_received, 0); if (usb_control_msg(usb_pcwd->udev, usb_sndctrlpipe(usb_pcwd->udev, 0), HID_REQ_SET_REPORT, HID_DT_REPORT, @@ -236,7 +236,7 @@ static int usb_pcwd_send_command(struct usb_pcwd_private *usb_pcwd, unsigned cha got_response = 0; for (count = 0; (count < USB_COMMAND_TIMEOUT) && (!got_response); count++) { mdelay(1); - if (atomic_read (&usb_pcwd->cmd_received)) + if (atomic_read(&usb_pcwd->cmd_received)) got_response = 1; } @@ -355,7 +355,7 @@ static ssize_t usb_pcwd_write(struct file *file, const char __user *data, /* scan to see whether or not we got the magic character */ for (i = 0; i != len; i++) { char c; - if(get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_release = 42; @@ -383,8 +383,7 @@ static long usb_pcwd_ioctl(struct file *file, unsigned int cmd, switch (cmd) { case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, - sizeof (ident)) ? -EFAULT : 0; + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: @@ -404,7 +403,7 @@ static long usb_pcwd_ioctl(struct file *file, unsigned int cmd, { int new_options, retval = -EINVAL; - if (get_user (new_options, p)) + if (get_user(new_options, p)) return -EFAULT; if (new_options & WDIOS_DISABLECARD) { @@ -518,10 +517,8 @@ static int usb_pcwd_temperature_release(struct inode *inode, struct file *file) static int usb_pcwd_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code==SYS_DOWN || code==SYS_HALT) { - /* Turn the WDT off */ - usb_pcwd_stop(usb_pcwd_device); - } + if (code == SYS_DOWN || code == SYS_HALT) + usb_pcwd_stop(usb_pcwd_device); /* Turn the WDT off */ return NOTIFY_DONE; } @@ -566,13 +563,13 @@ static struct notifier_block usb_pcwd_notifier = { /** * usb_pcwd_delete */ -static inline void usb_pcwd_delete (struct usb_pcwd_private *usb_pcwd) +static inline void usb_pcwd_delete(struct usb_pcwd_private *usb_pcwd) { usb_free_urb(usb_pcwd->intr_urb); if (usb_pcwd->intr_buffer != NULL) usb_buffer_free(usb_pcwd->udev, usb_pcwd->intr_size, usb_pcwd->intr_buffer, usb_pcwd->intr_dma); - kfree (usb_pcwd); + kfree(usb_pcwd); } /** @@ -625,7 +622,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); /* allocate memory for our device and initialize it */ - usb_pcwd = kzalloc (sizeof(struct usb_pcwd_private), GFP_KERNEL); + usb_pcwd = kzalloc(sizeof(struct usb_pcwd_private), GFP_KERNEL); if (usb_pcwd == NULL) { printk(KERN_ERR PFX "Out of memory\n"); goto error; @@ -640,7 +637,8 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi usb_pcwd->intr_size = (le16_to_cpu(endpoint->wMaxPacketSize) > 8 ? le16_to_cpu(endpoint->wMaxPacketSize) : 8); /* set up the memory buffer's */ - if (!(usb_pcwd->intr_buffer = usb_buffer_alloc(udev, usb_pcwd->intr_size, GFP_ATOMIC, &usb_pcwd->intr_dma))) { + usb_pcwd->intr_buffer = usb_buffer_alloc(udev, usb_pcwd->intr_size, GFP_ATOMIC, &usb_pcwd->intr_dma); + if (!usb_pcwd->intr_buffer) { printk(KERN_ERR PFX "Out of memory\n"); goto error; } @@ -674,11 +672,10 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi /* Get the Firmware Version */ got_fw_rev = usb_pcwd_send_command(usb_pcwd, CMD_GET_FIRMWARE_VERSION, &fw_rev_major, &fw_rev_minor); - if (got_fw_rev) { + if (got_fw_rev) sprintf(fw_ver_str, "%u.%02u", fw_rev_major, fw_rev_minor); - } else { + else sprintf(fw_ver_str, ""); - } printk(KERN_INFO PFX "Found card (Firmware: %s) with temp option\n", fw_ver_str); @@ -724,7 +721,7 @@ static int usb_pcwd_probe(struct usb_interface *interface, const struct usb_devi } /* we can register the device now, as it is ready */ - usb_set_intfdata (interface, usb_pcwd); + usb_set_intfdata(interface, usb_pcwd); printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n", heartbeat, nowayout); @@ -758,8 +755,8 @@ static void usb_pcwd_disconnect(struct usb_interface *interface) /* prevent races with open() */ mutex_lock(&disconnect_mutex); - usb_pcwd = usb_get_intfdata (interface); - usb_set_intfdata (interface, NULL); + usb_pcwd = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); mutex_lock(&usb_pcwd->mtx); @@ -819,5 +816,5 @@ static void __exit usb_pcwd_exit(void) } -module_init (usb_pcwd_init); -module_exit (usb_pcwd_exit); +module_init(usb_pcwd_init); +module_exit(usb_pcwd_exit); diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c index c172906b553..f1ae3729a19 100644 --- a/drivers/watchdog/rm9k_wdt.c +++ b/drivers/watchdog/rm9k_wdt.c @@ -234,8 +234,8 @@ static int wdt_gpi_release(struct inode *inode, struct file *file) return 0; } -static ssize_t -wdt_gpi_write(struct file *f, const char __user *d, size_t s, loff_t *o) +static ssize_t wdt_gpi_write(struct file *f, const char __user *d, size_t s, + loff_t *o) { char val; @@ -325,8 +325,8 @@ static long wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg) /* Shutdown notifier */ -static int -wdt_gpi_notify(struct notifier_block *this, unsigned long code, void *unused) +static int wdt_gpi_notify(struct notifier_block *this, unsigned long code, + void *unused) { if (code == SYS_DOWN || code == SYS_HALT) wdt_gpi_stop(); @@ -336,9 +336,8 @@ wdt_gpi_notify(struct notifier_block *this, unsigned long code, void *unused) /* Init & exit procedures */ -static const struct resource * -wdt_gpi_get_resource(struct platform_device *pdv, const char *name, - unsigned int type) +static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv, + const char *name, unsigned int type) { char buf[80]; if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf) diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c index 528097651f7..27e526a07c9 100644 --- a/drivers/watchdog/sb_wdog.c +++ b/drivers/watchdog/sb_wdog.c @@ -215,8 +215,8 @@ static long sbwdog_ioctl(struct file *file, unsigned int cmd, /* * Notifier for system down */ -static int -sbwdog_notify_sys(struct notifier_block *this, unsigned long code, void *erf) +static int sbwdog_notify_sys(struct notifier_block *this, unsigned long code, + void *erf) { if (code == SYS_DOWN || code == SYS_HALT) { /* diff --git a/drivers/watchdog/sbc60xxwdt.c b/drivers/watchdog/sbc60xxwdt.c index e801cd46c64..3266daaaecf 100644 --- a/drivers/watchdog/sbc60xxwdt.c +++ b/drivers/watchdog/sbc60xxwdt.c @@ -183,7 +183,7 @@ static ssize_t fop_write(struct file *file, const char __user *buf, magic character */ for (ofs = 0; ofs != count; ofs++) { char c; - if (get_user(c, buf+ofs)) + if (get_user(c, buf + ofs)) return -EFAULT; if (c == 'V') wdt_expect_close = 42; @@ -238,7 +238,7 @@ static long fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) switch (cmd) { case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ident, sizeof(ident))? -EFAULT : 0; + return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: return put_user(0, p); diff --git a/drivers/watchdog/sc1200wdt.c b/drivers/watchdog/sc1200wdt.c index f3bdc8227cc..23da3ccd832 100644 --- a/drivers/watchdog/sc1200wdt.c +++ b/drivers/watchdog/sc1200wdt.c @@ -279,7 +279,7 @@ static ssize_t sc1200wdt_write(struct file *file, const char __user *data, for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = 42; diff --git a/drivers/watchdog/scx200_wdt.c b/drivers/watchdog/scx200_wdt.c index fd5c09446bc..9e19a10a5bb 100644 --- a/drivers/watchdog/scx200_wdt.c +++ b/drivers/watchdog/scx200_wdt.c @@ -143,7 +143,7 @@ static ssize_t scx200_wdt_write(struct file *file, const char __user *data, expect_close = 0; for (i = 0; i < len; ++i) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = 42; diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c index 239383da6d8..988ff1d5b4b 100644 --- a/drivers/watchdog/smsc37b787_wdt.c +++ b/drivers/watchdog/smsc37b787_wdt.c @@ -408,7 +408,7 @@ static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data, magic character */ for (i = 0; i != len; i++) { char c; - if (get_user(c, data+i)) + if (get_user(c, data + i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -438,7 +438,7 @@ static long wb_smsc_wdt_ioctl(struct file *file, WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, .firmware_version = 0, - .identity = "SMsC 37B787 Watchdog" + .identity = "SMsC 37B787 Watchdog", }; uarg.i = (int __user *)arg; diff --git a/drivers/watchdog/txx9wdt.c b/drivers/watchdog/txx9wdt.c index 8382f9a9534..dbbc018a5f4 100644 --- a/drivers/watchdog/txx9wdt.c +++ b/drivers/watchdog/txx9wdt.c @@ -190,7 +190,7 @@ static struct miscdevice txx9wdt_miscdev = { }; static struct notifier_block txx9wdt_notifier = { - .notifier_call = txx9wdt_notify_sys + .notifier_call = txx9wdt_notify_sys, }; static int __init txx9wdt_probe(struct platform_device *dev) diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c index 59507f60999..69396adaa5c 100644 --- a/drivers/watchdog/w83627hf_wdt.c +++ b/drivers/watchdog/w83627hf_wdt.c @@ -180,7 +180,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, for (i = 0; i != count; i++) { char c; - if (get_user(c, buf+i)) + if (get_user(c, buf + i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -278,10 +278,9 @@ static int wdt_close(struct inode *inode, struct file *file) static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code == SYS_DOWN || code == SYS_HALT) { - /* Turn the WDT off */ - wdt_disable(); - } + if (code == SYS_DOWN || code == SYS_HALT) + wdt_disable(); /* Turn the WDT off */ + return NOTIFY_DONE; } diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index 12bd6618ed5..445d30a01ed 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -218,7 +218,7 @@ static ssize_t wdt_write(struct file *file, const char __user *buf, for (i = 0; i != count; i++) { char c; - if (get_user(c, buf+i)) + if (get_user(c, buf + i)) return -EFAULT; if (c == 'V') expect_close = 42; @@ -325,10 +325,9 @@ static int wdt_close(struct inode *inode, struct file *file) static int wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) { - if (code == SYS_DOWN || code == SYS_HALT) { - /* Turn the WDT off */ - wdt_disable(); - } + if (code == SYS_DOWN || code == SYS_HALT) + wdt_disable(); /* Turn the WDT off */ + return NOTIFY_DONE; } @@ -414,7 +413,7 @@ static int __init wdt_init(void) w83697hf_init(); if (early_disable) { if (wdt_running()) - printk (KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n"); + printk(KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n"); wdt_disable(); } diff --git a/drivers/watchdog/wafer5823wdt.c b/drivers/watchdog/wafer5823wdt.c index 44e81f7d432..68377ae171f 100644 --- a/drivers/watchdog/wafer5823wdt.c +++ b/drivers/watchdog/wafer5823wdt.c @@ -1,11 +1,11 @@ /* * ICP Wafer 5823 Single Board Computer WDT driver - * http://www.icpamerica.com/wafer_5823.php - * May also work on other similar models + * http://www.icpamerica.com/wafer_5823.php + * May also work on other similar models * * (c) Copyright 2002 Justin Cormack * - * Release 0.02 + * Release 0.02 * * Based on advantechwdt.c which is based on wdt.c. * Original copyright messages: @@ -50,10 +50,10 @@ static DEFINE_SPINLOCK(wafwdt_lock); /* * You must set these - there is no sane way to probe for this board. * - * To enable, write the timeout value in seconds (1 to 255) to I/O - * port WDT_START, then read the port to start the watchdog. To pat - * the dog, read port WDT_STOP to stop the timer, then read WDT_START - * to restart it again. + * To enable, write the timeout value in seconds (1 to 255) to I/O + * port WDT_START, then read the port to start the watchdog. To pat + * the dog, read port WDT_STOP to stop the timer, then read WDT_START + * to restart it again. */ static int wdt_stop = 0x843; @@ -87,8 +87,7 @@ static void wafwdt_start(void) inb_p(wdt_start); } -static void -wafwdt_stop(void) +static void wafwdt_stop(void) { /* stop watchdog */ inb_p(wdt_stop); @@ -199,8 +198,7 @@ static int wafwdt_open(struct inode *inode, struct file *file) return nonseekable_open(inode, file); } -static int -wafwdt_close(struct inode *inode, struct file *file) +static int wafwdt_close(struct inode *inode, struct file *file) { if (expect_close == 42) wafwdt_stop(); diff --git a/drivers/watchdog/wd501p.h b/drivers/watchdog/wd501p.h index a4504f40394..db34853c28a 100644 --- a/drivers/watchdog/wd501p.h +++ b/drivers/watchdog/wd501p.h @@ -12,7 +12,7 @@ * http://www.cymru.net * * This driver is provided under the GNU General Public License, incorporated - * herein by reference. The driver is provided without warranty or + * herein by reference. The driver is provided without warranty or * support. * * Release 0.04. diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c index 20fd6715f25..5d3b1a8e28b 100644 --- a/drivers/watchdog/wdrtas.c +++ b/drivers/watchdog/wdrtas.c @@ -313,7 +313,7 @@ static long wdrtas_ioctl(struct file *file, unsigned int cmd, static struct watchdog_info wdinfo = { .options = WDRTAS_SUPPORTED_MASK, .firmware_version = 0, - .identity = "wdrtas" + .identity = "wdrtas", }; switch (cmd) { diff --git a/drivers/watchdog/wdt_pci.c b/drivers/watchdog/wdt_pci.c index fb8fc014485..ed02bdb38c0 100644 --- a/drivers/watchdog/wdt_pci.c +++ b/drivers/watchdog/wdt_pci.c @@ -381,7 +381,7 @@ static ssize_t wdtpci_write(struct file *file, const char __user *buf, for (i = 0; i != count; i++) { char c; - if (get_user(c, buf+i)) + if (get_user(c, buf + i)) return -EFAULT; if (c == 'V') expect_close = 42; -- GitLab From 970a8a513c30a1c3e8995609a153658a34bc02bf Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 6 Aug 2008 22:19:39 +0200 Subject: [PATCH 0896/1024] m68k/amiserial: fix fallout of tty break handling rework commit 9e98966c7bb94355689478bc84cc3e0c190f977e (tty: rework break handling) forgot to update one exit point of rs_break() in the Amiga serial driver. Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds --- drivers/char/amiserial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c index 3530ff417a5..6e763e3f5a8 100644 --- a/drivers/char/amiserial.c +++ b/drivers/char/amiserial.c @@ -1254,7 +1254,7 @@ static int rs_break(struct tty_struct *tty, int break_state) unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_break")) - return; + return -EINVAL; local_irq_save(flags); if (break_state == -1) -- GitLab From 73ce48f6c6b9d9dcf6a2bba0bcde39ede76809f0 Mon Sep 17 00:00:00 2001 From: Juerg Haefliger Date: Wed, 6 Aug 2008 22:41:03 +0200 Subject: [PATCH 0897/1024] hwmon: (dme1737) Cleanups Fix names of attribute structs to make them more consistent with the rest of the code. Minor comment changes. Signed-off-by: Juerg Haefliger Signed-off-by: Jean Delvare --- drivers/hwmon/dme1737.c | 94 ++++++++++++++++++++--------------------- 1 file changed, 47 insertions(+), 47 deletions(-) diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 5e2cf0aef48..9635fa6014f 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -1166,7 +1166,7 @@ static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", res); } -static struct attribute *dme1737_attr_pwm[]; +static struct attribute *dme1737_pwm_chmod_attr[]; static void dme1737_chmod_file(struct device*, struct attribute*, mode_t); static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, @@ -1230,7 +1230,7 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, switch (val) { case 0: /* Change permissions of pwm[ix] to read-only */ - dme1737_chmod_file(dev, dme1737_attr_pwm[ix], + dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], S_IRUGO); /* Turn fan fully on */ data->pwm_config[ix] = PWM_EN_TO_REG(0, @@ -1245,12 +1245,12 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, dme1737_write(client, DME1737_REG_PWM_CONFIG(ix), data->pwm_config[ix]); /* Change permissions of pwm[ix] to read-writeable */ - dme1737_chmod_file(dev, dme1737_attr_pwm[ix], + dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], S_IRUGO | S_IWUSR); break; case 2: /* Change permissions of pwm[ix] to read-only */ - dme1737_chmod_file(dev, dme1737_attr_pwm[ix], + dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix], S_IRUGO); /* Turn on auto mode using the saved zone channel * assignment */ @@ -1612,7 +1612,7 @@ static const struct attribute_group dme1737_group = { /* The following structs hold the PWM attributes, some of which are optional. * Their creation depends on the chip configuration which is determined during * module load. */ -static struct attribute *dme1737_attr_pwm1[] = { +static struct attribute *dme1737_pwm1_attr[] = { &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_pwm1_freq.dev_attr.attr, &sensor_dev_attr_pwm1_enable.dev_attr.attr, @@ -1623,7 +1623,7 @@ static struct attribute *dme1737_attr_pwm1[] = { &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm2[] = { +static struct attribute *dme1737_pwm2_attr[] = { &sensor_dev_attr_pwm2.dev_attr.attr, &sensor_dev_attr_pwm2_freq.dev_attr.attr, &sensor_dev_attr_pwm2_enable.dev_attr.attr, @@ -1634,7 +1634,7 @@ static struct attribute *dme1737_attr_pwm2[] = { &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm3[] = { +static struct attribute *dme1737_pwm3_attr[] = { &sensor_dev_attr_pwm3.dev_attr.attr, &sensor_dev_attr_pwm3_freq.dev_attr.attr, &sensor_dev_attr_pwm3_enable.dev_attr.attr, @@ -1645,13 +1645,13 @@ static struct attribute *dme1737_attr_pwm3[] = { &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm5[] = { +static struct attribute *dme1737_pwm5_attr[] = { &sensor_dev_attr_pwm5.dev_attr.attr, &sensor_dev_attr_pwm5_freq.dev_attr.attr, &sensor_dev_attr_pwm5_enable.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm6[] = { +static struct attribute *dme1737_pwm6_attr[] = { &sensor_dev_attr_pwm6.dev_attr.attr, &sensor_dev_attr_pwm6_freq.dev_attr.attr, &sensor_dev_attr_pwm6_enable.dev_attr.attr, @@ -1659,53 +1659,53 @@ static struct attribute *dme1737_attr_pwm6[] = { }; static const struct attribute_group dme1737_pwm_group[] = { - { .attrs = dme1737_attr_pwm1 }, - { .attrs = dme1737_attr_pwm2 }, - { .attrs = dme1737_attr_pwm3 }, + { .attrs = dme1737_pwm1_attr }, + { .attrs = dme1737_pwm2_attr }, + { .attrs = dme1737_pwm3_attr }, { .attrs = NULL }, - { .attrs = dme1737_attr_pwm5 }, - { .attrs = dme1737_attr_pwm6 }, + { .attrs = dme1737_pwm5_attr }, + { .attrs = dme1737_pwm6_attr }, }; /* The following structs hold the fan attributes, some of which are optional. * Their creation depends on the chip configuration which is determined during * module load. */ -static struct attribute *dme1737_attr_fan1[] = { +static struct attribute *dme1737_fan1_attr[] = { &sensor_dev_attr_fan1_input.dev_attr.attr, &sensor_dev_attr_fan1_min.dev_attr.attr, &sensor_dev_attr_fan1_alarm.dev_attr.attr, &sensor_dev_attr_fan1_type.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan2[] = { +static struct attribute *dme1737_fan2_attr[] = { &sensor_dev_attr_fan2_input.dev_attr.attr, &sensor_dev_attr_fan2_min.dev_attr.attr, &sensor_dev_attr_fan2_alarm.dev_attr.attr, &sensor_dev_attr_fan2_type.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan3[] = { +static struct attribute *dme1737_fan3_attr[] = { &sensor_dev_attr_fan3_input.dev_attr.attr, &sensor_dev_attr_fan3_min.dev_attr.attr, &sensor_dev_attr_fan3_alarm.dev_attr.attr, &sensor_dev_attr_fan3_type.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan4[] = { +static struct attribute *dme1737_fan4_attr[] = { &sensor_dev_attr_fan4_input.dev_attr.attr, &sensor_dev_attr_fan4_min.dev_attr.attr, &sensor_dev_attr_fan4_alarm.dev_attr.attr, &sensor_dev_attr_fan4_type.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan5[] = { +static struct attribute *dme1737_fan5_attr[] = { &sensor_dev_attr_fan5_input.dev_attr.attr, &sensor_dev_attr_fan5_min.dev_attr.attr, &sensor_dev_attr_fan5_alarm.dev_attr.attr, &sensor_dev_attr_fan5_max.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_fan6[] = { +static struct attribute *dme1737_fan6_attr[] = { &sensor_dev_attr_fan6_input.dev_attr.attr, &sensor_dev_attr_fan6_min.dev_attr.attr, &sensor_dev_attr_fan6_alarm.dev_attr.attr, @@ -1714,17 +1714,17 @@ static struct attribute *dme1737_attr_fan6[] = { }; static const struct attribute_group dme1737_fan_group[] = { - { .attrs = dme1737_attr_fan1 }, - { .attrs = dme1737_attr_fan2 }, - { .attrs = dme1737_attr_fan3 }, - { .attrs = dme1737_attr_fan4 }, - { .attrs = dme1737_attr_fan5 }, - { .attrs = dme1737_attr_fan6 }, + { .attrs = dme1737_fan1_attr }, + { .attrs = dme1737_fan2_attr }, + { .attrs = dme1737_fan3_attr }, + { .attrs = dme1737_fan4_attr }, + { .attrs = dme1737_fan5_attr }, + { .attrs = dme1737_fan6_attr }, }; /* The permissions of all of the following attributes are changed to read- * writeable if the chip is *not* locked. Otherwise they stay read-only. */ -static struct attribute *dme1737_attr_lock[] = { +static struct attribute *dme1737_misc_chmod_attr[] = { /* Temperatures */ &sensor_dev_attr_temp1_offset.dev_attr.attr, &sensor_dev_attr_temp2_offset.dev_attr.attr, @@ -1745,14 +1745,14 @@ static struct attribute *dme1737_attr_lock[] = { NULL }; -static const struct attribute_group dme1737_lock_group = { - .attrs = dme1737_attr_lock, +static const struct attribute_group dme1737_misc_chmod_group = { + .attrs = dme1737_misc_chmod_attr, }; /* The permissions of the following PWM attributes are changed to read- * writeable if the chip is *not* locked and the respective PWM is available. * Otherwise they stay read-only. */ -static struct attribute *dme1737_attr_pwm1_lock[] = { +static struct attribute *dme1737_pwm1_chmod_attr[] = { &sensor_dev_attr_pwm1_freq.dev_attr.attr, &sensor_dev_attr_pwm1_enable.dev_attr.attr, &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, @@ -1761,7 +1761,7 @@ static struct attribute *dme1737_attr_pwm1_lock[] = { &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm2_lock[] = { +static struct attribute *dme1737_pwm2_chmod_attr[] = { &sensor_dev_attr_pwm2_freq.dev_attr.attr, &sensor_dev_attr_pwm2_enable.dev_attr.attr, &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, @@ -1770,7 +1770,7 @@ static struct attribute *dme1737_attr_pwm2_lock[] = { &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm3_lock[] = { +static struct attribute *dme1737_pwm3_chmod_attr[] = { &sensor_dev_attr_pwm3_freq.dev_attr.attr, &sensor_dev_attr_pwm3_enable.dev_attr.attr, &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, @@ -1779,29 +1779,29 @@ static struct attribute *dme1737_attr_pwm3_lock[] = { &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm5_lock[] = { +static struct attribute *dme1737_pwm5_chmod_attr[] = { &sensor_dev_attr_pwm5.dev_attr.attr, &sensor_dev_attr_pwm5_freq.dev_attr.attr, NULL }; -static struct attribute *dme1737_attr_pwm6_lock[] = { +static struct attribute *dme1737_pwm6_chmod_attr[] = { &sensor_dev_attr_pwm6.dev_attr.attr, &sensor_dev_attr_pwm6_freq.dev_attr.attr, NULL }; -static const struct attribute_group dme1737_pwm_lock_group[] = { - { .attrs = dme1737_attr_pwm1_lock }, - { .attrs = dme1737_attr_pwm2_lock }, - { .attrs = dme1737_attr_pwm3_lock }, +static const struct attribute_group dme1737_pwm_chmod_group[] = { + { .attrs = dme1737_pwm1_chmod_attr }, + { .attrs = dme1737_pwm2_chmod_attr }, + { .attrs = dme1737_pwm3_chmod_attr }, { .attrs = NULL }, - { .attrs = dme1737_attr_pwm5_lock }, - { .attrs = dme1737_attr_pwm6_lock }, + { .attrs = dme1737_pwm5_chmod_attr }, + { .attrs = dme1737_pwm6_chmod_attr }, }; /* Pwm[1-3] are read-writeable if the associated pwm is in manual mode and the * chip is not locked. Otherwise they are read-only. */ -static struct attribute *dme1737_attr_pwm[] = { +static struct attribute *dme1737_pwm_chmod_attr[] = { &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_pwm2.dev_attr.attr, &sensor_dev_attr_pwm3.dev_attr.attr, @@ -1927,15 +1927,15 @@ static int dme1737_create_files(struct device *dev) dev_info(dev, "Device is locked. Some attributes " "will be read-only.\n"); } else { - /* Change permissions of standard attributes */ - dme1737_chmod_group(dev, &dme1737_lock_group, + /* Change permissions of standard sysfs attributes */ + dme1737_chmod_group(dev, &dme1737_misc_chmod_group, S_IRUGO | S_IWUSR); - /* Change permissions of PWM attributes */ - for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_lock_group); ix++) { + /* Change permissions of PWM sysfs attributes */ + for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_chmod_group); ix++) { if (data->has_pwm & (1 << ix)) { dme1737_chmod_group(dev, - &dme1737_pwm_lock_group[ix], + &dme1737_pwm_chmod_group[ix], S_IRUGO | S_IWUSR); } } @@ -1945,7 +1945,7 @@ static int dme1737_create_files(struct device *dev) if ((data->has_pwm & (1 << ix)) && (PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) { dme1737_chmod_file(dev, - dme1737_attr_pwm[ix], + dme1737_pwm_chmod_attr[ix], S_IRUGO | S_IWUSR); } } -- GitLab From 55d68d75ab00e60953f8784af5927b60967a297f Mon Sep 17 00:00:00 2001 From: Juerg Haefliger Date: Wed, 6 Aug 2008 22:41:03 +0200 Subject: [PATCH 0898/1024] hwmon: (dme1737) Skip detection if forced Skip the checking of the device ID register in the hwmon register block if the force_id option is used. Signed-off-by: Juerg Haefliger Signed-off-by: Jean Delvare --- drivers/hwmon/dme1737.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 9635fa6014f..b36290048b9 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -2360,13 +2360,16 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev) client->addr = res->start; platform_set_drvdata(pdev, data); - company = dme1737_read(client, DME1737_REG_COMPANY); - device = dme1737_read(client, DME1737_REG_DEVICE); + /* Skip chip detection if module is loaded with force_id parameter */ + if (!force_id) { + company = dme1737_read(client, DME1737_REG_COMPANY); + device = dme1737_read(client, DME1737_REG_DEVICE); - if (!((company == DME1737_COMPANY_SMSC) && - (device == SCH311X_DEVICE))) { - err = -ENODEV; - goto exit_kfree; + if (!((company == DME1737_COMPANY_SMSC) && + (device == SCH311X_DEVICE))) { + err = -ENODEV; + goto exit_kfree; + } } data->type = -1; -- GitLab From 549edb83327f2a5027a22d65b10603b01dc40175 Mon Sep 17 00:00:00 2001 From: Juerg Haefliger Date: Wed, 6 Aug 2008 22:41:03 +0200 Subject: [PATCH 0899/1024] hwmon: (dme1737) Add support for the SMSC SCH5027 Add support for the SCH5027. The differences to the DME1737 are: - No support for programmable temp offsets - In auto mode, PWM outputs stay on min value if temp goes below low threshold and can't be programmed to fully turn off - Different voltage scaling - No VID input Signed-off-by: Juerg Haefliger Signed-off-by: Jean Delvare --- Documentation/hwmon/dme1737 | 53 +++++++--- drivers/hwmon/Kconfig | 4 +- drivers/hwmon/dme1737.c | 193 ++++++++++++++++++++++++------------ 3 files changed, 169 insertions(+), 81 deletions(-) diff --git a/Documentation/hwmon/dme1737 b/Documentation/hwmon/dme1737 index b1fe0099943..001d2e70bc1 100644 --- a/Documentation/hwmon/dme1737 +++ b/Documentation/hwmon/dme1737 @@ -10,6 +10,10 @@ Supported chips: Prefix: 'sch311x' Addresses scanned: none, address read from Super-I/O config space Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf + * SMSC SCH5027 + Prefix: 'sch5027' + Addresses scanned: I2C 0x2c, 0x2d, 0x2e + Datasheet: Provided by SMSC upon request and under NDA Authors: Juerg Haefliger @@ -27,33 +31,31 @@ Module Parameters following boards: - VIA EPIA SN18000 -Note that there is no need to use this parameter if the driver loads without -complaining. The driver will say so if it is necessary. - Description ----------- This driver implements support for the hardware monitoring capabilities of the -SMSC DME1737 and Asus A8000 (which are the same) and SMSC SCH311x Super-I/O -chips. These chips feature monitoring of 3 temp sensors temp[1-3] (2 remote -diodes and 1 internal), 7 voltages in[0-6] (6 external and 1 internal) and up -to 6 fan speeds fan[1-6]. Additionally, the chips implement up to 5 PWM -outputs pwm[1-3,5-6] for controlling fan speeds both manually and +SMSC DME1737 and Asus A8000 (which are the same), SMSC SCH5027, and SMSC +SCH311x Super-I/O chips. These chips feature monitoring of 3 temp sensors +temp[1-3] (2 remote diodes and 1 internal), 7 voltages in[0-6] (6 external and +1 internal) and up to 6 fan speeds fan[1-6]. Additionally, the chips implement +up to 5 PWM outputs pwm[1-3,5-6] for controlling fan speeds both manually and automatically. -For the DME1737 and A8000, fan[1-2] and pwm[1-2] are always present. Fan[3-6] -and pwm[3,5-6] are optional features and their availability depends on the -configuration of the chip. The driver will detect which features are present -during initialization and create the sysfs attributes accordingly. +For the DME1737, A8000 and SCH5027, fan[1-2] and pwm[1-2] are always present. +Fan[3-6] and pwm[3,5-6] are optional features and their availability depends on +the configuration of the chip. The driver will detect which features are +present during initialization and create the sysfs attributes accordingly. For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and pwm[5-6] don't exist. -The hardware monitoring features of the DME1737 and A8000 are only accessible -via SMBus, while the SCH311x only provides access via the ISA bus. The driver -will therefore register itself as an I2C client driver if it detects a DME1737 -or A8000 and as a platform driver if it detects a SCH311x chip. +The hardware monitoring features of the DME1737, A8000, and SCH5027 are only +accessible via SMBus, while the SCH311x only provides access via the ISA bus. +The driver will therefore register itself as an I2C client driver if it detects +a DME1737, A8000, or SCH5027 and as a platform driver if it detects a SCH311x +chip. Voltage Monitoring @@ -64,6 +66,7 @@ scaling resistors. The values returned by the driver therefore reflect true millivolts and don't need scaling. The voltage inputs are mapped as follows (the last column indicates the input ranges): +DME1737, A8000: in0: +5VTR (+5V standby) 0V - 6.64V in1: Vccp (processor core) 0V - 3V in2: VCC (internal +3.3V) 0V - 4.38V @@ -72,6 +75,24 @@ millivolts and don't need scaling. The voltage inputs are mapped as follows in5: VTR (+3.3V standby) 0V - 4.38V in6: Vbat (+3.0V) 0V - 4.38V +SCH311x: + in0: +2.5V 0V - 6.64V + in1: Vccp (processor core) 0V - 2V + in2: VCC (internal +3.3V) 0V - 4.38V + in3: +5V 0V - 6.64V + in4: +12V 0V - 16V + in5: VTR (+3.3V standby) 0V - 4.38V + in6: Vbat (+3.0V) 0V - 4.38V + +SCH5027: + in0: +5VTR (+5V standby) 0V - 6.64V + in1: Vccp (processor core) 0V - 3V + in2: VCC (internal +3.3V) 0V - 4.38V + in3: V2_IN 0V - 1.5V + in4: V1_IN 0V - 1.5V + in5: VTR (+3.3V standby) 0V - 4.38V + in6: Vbat (+3.0V) 0V - 4.38V + Each voltage input has associated min and max limits which trigger an alarm when crossed. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index c882fd05cf2..1de240a26fc 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -575,8 +575,8 @@ config SENSORS_DME1737 select HWMON_VID help If you say yes here you get support for the hardware monitoring - and fan control features of the SMSC DME1737 (and compatibles - like the Asus A8000) and SCH311x Super-I/O chips. + and fan control features of the SMSC DME1737, SCH311x, SCH5027, and + Asus A8000 Super-I/O chips. This driver can also be built as a module. If so, the module will be called dme1737. diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index b36290048b9..cdb8311e4ef 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -1,11 +1,11 @@ /* - * dme1737.c - Driver for the SMSC DME1737, Asus A8000, and SMSC SCH311x - * Super-I/O chips integrated hardware monitoring features. - * Copyright (c) 2007 Juerg Haefliger + * dme1737.c - Driver for the SMSC DME1737, Asus A8000, SMSC SCH311x and + * SCH5027 Super-I/O chips integrated hardware monitoring features. + * Copyright (c) 2007, 2008 Juerg Haefliger * * This driver is an I2C/ISA hybrid, meaning that it uses the I2C bus to access - * the chip registers if a DME1737 (or A8000) is found and the ISA bus if a - * SCH311x chip is found. Both types of chips have very similar hardware + * the chip registers if a DME1737, A8000, or SCH5027 is found and the ISA bus + * if a SCH311x chip is found. Both types of chips have very similar hardware * monitoring capabilities but differ in the way they can be accessed. * * This program is free software; you can redistribute it and/or modify @@ -57,7 +57,10 @@ MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC " static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END}; /* Insmod parameters */ -I2C_CLIENT_INSMOD_1(dme1737); +I2C_CLIENT_INSMOD_2(dme1737, sch5027); + +/* ISA chip types */ +enum isa_chips { sch311x = sch5027 + 1 }; /* --------------------------------------------------------------------- * Registers @@ -163,6 +166,7 @@ static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23}; #define DME1737_VERSTEP 0x88 #define DME1737_VERSTEP_MASK 0xf8 #define SCH311X_DEVICE 0x8c +#define SCH5027_VERSTEP 0x69 /* Length of ISA address segment */ #define DME1737_EXTENT 2 @@ -182,6 +186,7 @@ struct dme1737_data { unsigned long last_update; /* in jiffies */ unsigned long last_vbat; /* in jiffies */ enum chips type; + const int *in_nominal; /* pointer to IN_NOMINAL array */ u8 vid; u8 pwm_rr_en; @@ -220,23 +225,23 @@ static const int IN_NOMINAL_DME1737[] = {5000, 2250, 3300, 5000, 12000, 3300, 3300}; static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300, 3300}; -#define IN_NOMINAL(ix, type) (((type) == dme1737) ? \ - IN_NOMINAL_DME1737[(ix)] : \ - IN_NOMINAL_SCH311x[(ix)]) +static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300, + 3300}; +#define IN_NOMINAL(type) ((type) == sch311x ? IN_NOMINAL_SCH311x : \ + (type) == sch5027 ? IN_NOMINAL_SCH5027 : \ + IN_NOMINAL_DME1737) /* Voltage input * Voltage inputs have 16 bits resolution, limit values have 8 bits * resolution. */ -static inline int IN_FROM_REG(int reg, int ix, int res, int type) +static inline int IN_FROM_REG(int reg, int nominal, int res) { - return (reg * IN_NOMINAL(ix, type) + (3 << (res - 3))) / - (3 << (res - 2)); + return (reg * nominal + (3 << (res - 3))) / (3 << (res - 2)); } -static inline int IN_TO_REG(int val, int ix, int type) +static inline int IN_TO_REG(int val, int nominal) { - return SENSORS_LIMIT((val * 192 + IN_NOMINAL(ix, type) / 2) / - IN_NOMINAL(ix, type), 0, 255); + return SENSORS_LIMIT((val * 192 + nominal / 2) / nominal, 0, 255); } /* Temperature input @@ -565,7 +570,10 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) /* Sample register contents every 1 sec */ if (time_after(jiffies, data->last_update + HZ) || !data->valid) { - data->vid = dme1737_read(client, DME1737_REG_VID) & 0x3f; + if (data->type != sch5027) { + data->vid = dme1737_read(client, DME1737_REG_VID) & + 0x3f; + } /* In (voltage) registers */ for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) { @@ -593,8 +601,10 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) DME1737_REG_TEMP_MIN(ix)); data->temp_max[ix] = dme1737_read(client, DME1737_REG_TEMP_MAX(ix)); - data->temp_offset[ix] = dme1737_read(client, - DME1737_REG_TEMP_OFFSET(ix)); + if (data->type != sch5027) { + data->temp_offset[ix] = dme1737_read(client, + DME1737_REG_TEMP_OFFSET(ix)); + } } /* In and temp LSB registers @@ -669,9 +679,11 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) data->zone_abs[ix] = dme1737_read(client, DME1737_REG_ZONE_ABS(ix)); } - for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) { - data->zone_hyst[ix] = dme1737_read(client, + if (data->type != sch5027) { + for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) { + data->zone_hyst[ix] = dme1737_read(client, DME1737_REG_ZONE_HYST(ix)); + } } /* Alarm registers */ @@ -735,13 +747,13 @@ static ssize_t show_in(struct device *dev, struct device_attribute *attr, switch (fn) { case SYS_IN_INPUT: - res = IN_FROM_REG(data->in[ix], ix, 16, data->type); + res = IN_FROM_REG(data->in[ix], data->in_nominal[ix], 16); break; case SYS_IN_MIN: - res = IN_FROM_REG(data->in_min[ix], ix, 8, data->type); + res = IN_FROM_REG(data->in_min[ix], data->in_nominal[ix], 8); break; case SYS_IN_MAX: - res = IN_FROM_REG(data->in_max[ix], ix, 8, data->type); + res = IN_FROM_REG(data->in_max[ix], data->in_nominal[ix], 8); break; case SYS_IN_ALARM: res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01; @@ -768,12 +780,12 @@ static ssize_t set_in(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); switch (fn) { case SYS_IN_MIN: - data->in_min[ix] = IN_TO_REG(val, ix, data->type); + data->in_min[ix] = IN_TO_REG(val, data->in_nominal[ix]); dme1737_write(client, DME1737_REG_IN_MIN(ix), data->in_min[ix]); break; case SYS_IN_MAX: - data->in_max[ix] = IN_TO_REG(val, ix, data->type); + data->in_max[ix] = IN_TO_REG(val, data->in_nominal[ix]); dme1737_write(client, DME1737_REG_IN_MAX(ix), data->in_max[ix]); break; @@ -1570,43 +1582,56 @@ static struct attribute *dme1737_attr[] ={ &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_alarm.dev_attr.attr, &sensor_dev_attr_temp1_fault.dev_attr.attr, - &sensor_dev_attr_temp1_offset.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp2_min.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, &sensor_dev_attr_temp2_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, - &sensor_dev_attr_temp2_offset.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, &sensor_dev_attr_temp3_min.dev_attr.attr, &sensor_dev_attr_temp3_max.dev_attr.attr, &sensor_dev_attr_temp3_alarm.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, - &sensor_dev_attr_temp3_offset.dev_attr.attr, /* Zones */ - &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_channels_temp.dev_attr.attr, - &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr, - &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr, + NULL +}; + +static const struct attribute_group dme1737_group = { + .attrs = dme1737_attr, +}; + +/* The following struct holds misc attributes, which are not available in all + * chips. Their creation depends on the chip type which is determined during + * module load. */ +static struct attribute *dme1737_misc_attr[] = { + /* Temperatures */ + &sensor_dev_attr_temp1_offset.dev_attr.attr, + &sensor_dev_attr_temp2_offset.dev_attr.attr, + &sensor_dev_attr_temp3_offset.dev_attr.attr, + /* Zones */ + &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, + &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, /* Misc */ &dev_attr_vrm.attr, &dev_attr_cpu0_vid.attr, NULL }; -static const struct attribute_group dme1737_group = { - .attrs = dme1737_attr, +static const struct attribute_group dme1737_misc_group = { + .attrs = dme1737_misc_attr, }; /* The following structs hold the PWM attributes, some of which are optional. @@ -1618,7 +1643,6 @@ static struct attribute *dme1737_pwm1_attr[] = { &sensor_dev_attr_pwm1_enable.dev_attr.attr, &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, NULL @@ -1629,7 +1653,6 @@ static struct attribute *dme1737_pwm2_attr[] = { &sensor_dev_attr_pwm2_enable.dev_attr.attr, &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, NULL @@ -1640,7 +1663,6 @@ static struct attribute *dme1737_pwm3_attr[] = { &sensor_dev_attr_pwm3_enable.dev_attr.attr, &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, NULL @@ -1667,6 +1689,15 @@ static const struct attribute_group dme1737_pwm_group[] = { { .attrs = dme1737_pwm6_attr }, }; +/* The following struct holds misc PWM attributes, which are not available in + * all chips. Their creation depends on the chip type which is determined + * during module load. */ +static struct attribute *dme1737_pwm_misc_attr[] = { + &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, +}; + /* The following structs hold the fan attributes, some of which are optional. * Their creation depends on the chip configuration which is determined during * module load. */ @@ -1722,31 +1753,23 @@ static const struct attribute_group dme1737_fan_group[] = { { .attrs = dme1737_fan6_attr }, }; -/* The permissions of all of the following attributes are changed to read- +/* The permissions of the following zone attributes are changed to read- * writeable if the chip is *not* locked. Otherwise they stay read-only. */ -static struct attribute *dme1737_misc_chmod_attr[] = { - /* Temperatures */ - &sensor_dev_attr_temp1_offset.dev_attr.attr, - &sensor_dev_attr_temp2_offset.dev_attr.attr, - &sensor_dev_attr_temp3_offset.dev_attr.attr, - /* Zones */ - &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, +static struct attribute *dme1737_zone_chmod_attr[] = { &sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr, - &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr, - &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr, NULL }; -static const struct attribute_group dme1737_misc_chmod_group = { - .attrs = dme1737_misc_chmod_attr, +static const struct attribute_group dme1737_zone_chmod_group = { + .attrs = dme1737_zone_chmod_attr, }; /* The permissions of the following PWM attributes are changed to read- @@ -1757,7 +1780,6 @@ static struct attribute *dme1737_pwm1_chmod_attr[] = { &sensor_dev_attr_pwm1_enable.dev_attr.attr, &sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, NULL }; @@ -1766,7 +1788,6 @@ static struct attribute *dme1737_pwm2_chmod_attr[] = { &sensor_dev_attr_pwm2_enable.dev_attr.attr, &sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, NULL }; @@ -1775,7 +1796,6 @@ static struct attribute *dme1737_pwm3_chmod_attr[] = { &sensor_dev_attr_pwm3_enable.dev_attr.attr, &sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr, &sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, NULL }; @@ -1875,9 +1895,17 @@ static void dme1737_remove_files(struct device *dev) if (data->has_pwm & (1 << ix)) { sysfs_remove_group(&dev->kobj, &dme1737_pwm_group[ix]); + if (data->type != sch5027 && ix < 3) { + sysfs_remove_file(&dev->kobj, + dme1737_pwm_misc_attr[ix]); + } } } + if (data->type != sch5027) { + sysfs_remove_group(&dev->kobj, &dme1737_misc_group); + } + sysfs_remove_group(&dev->kobj, &dme1737_group); if (!data->client.driver) { @@ -1901,6 +1929,13 @@ static int dme1737_create_files(struct device *dev) goto exit_remove; } + /* Create misc sysfs attributes */ + if ((data->type != sch5027) && + (err = sysfs_create_group(&dev->kobj, + &dme1737_misc_group))) { + goto exit_remove; + } + /* Create fan sysfs attributes */ for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) { if (data->has_fan & (1 << ix)) { @@ -1918,6 +1953,11 @@ static int dme1737_create_files(struct device *dev) &dme1737_pwm_group[ix]))) { goto exit_remove; } + if (data->type != sch5027 && ix < 3 && + (err = sysfs_create_file(&dev->kobj, + dme1737_pwm_misc_attr[ix]))) { + goto exit_remove; + } } } @@ -1927,16 +1967,27 @@ static int dme1737_create_files(struct device *dev) dev_info(dev, "Device is locked. Some attributes " "will be read-only.\n"); } else { - /* Change permissions of standard sysfs attributes */ - dme1737_chmod_group(dev, &dme1737_misc_chmod_group, + /* Change permissions of zone sysfs attributes */ + dme1737_chmod_group(dev, &dme1737_zone_chmod_group, S_IRUGO | S_IWUSR); + /* Change permissions of misc sysfs attributes */ + if (data->type != sch5027) { + dme1737_chmod_group(dev, &dme1737_misc_group, + S_IRUGO | S_IWUSR); + } + /* Change permissions of PWM sysfs attributes */ for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_chmod_group); ix++) { if (data->has_pwm & (1 << ix)) { dme1737_chmod_group(dev, &dme1737_pwm_chmod_group[ix], S_IRUGO | S_IWUSR); + if (data->type != sch5027 && ix < 3) { + dme1737_chmod_file(dev, + dme1737_pwm_misc_attr[ix], + S_IRUGO | S_IWUSR); + } } } @@ -1966,6 +2017,9 @@ static int dme1737_init_device(struct device *dev) int ix; u8 reg; + /* Point to the right nominal voltages array */ + data->in_nominal = IN_NOMINAL(data->type); + data->config = dme1737_read(client, DME1737_REG_CONFIG); /* Inform if part is not monitoring/started */ if (!(data->config & 0x01)) { @@ -2076,7 +2130,9 @@ static int dme1737_init_device(struct device *dev) data->pwm_acz[2] = 4; /* pwm3 -> zone3 */ /* Set VRM */ - data->vrm = vid_which_vrm(); + if (data->type != sch5027) { + data->vrm = vid_which_vrm(); + } return 0; } @@ -2095,9 +2151,10 @@ static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data) dme1737_sio_enter(sio_cip); /* Check device ID - * The DME1737 can return either 0x78 or 0x77 as its device ID. */ + * The DME1737 can return either 0x78 or 0x77 as its device ID. + * The SCH5027 returns 0x89 as its device ID. */ reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20); - if (!(reg == 0x77 || reg == 0x78)) { + if (!(reg == 0x77 || reg == 0x78 || reg == 0x89)) { err = -ENODEV; goto exit; } @@ -2166,15 +2223,24 @@ static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address, company = dme1737_read(client, DME1737_REG_COMPANY); verstep = dme1737_read(client, DME1737_REG_VERSTEP); - if (!((company == DME1737_COMPANY_SMSC) && - ((verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP))) { + if (company == DME1737_COMPANY_SMSC && + (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) { + kind = dme1737; + } else if (company == DME1737_COMPANY_SMSC && + verstep == SCH5027_VERSTEP) { + kind = sch5027; + } else { err = -ENODEV; goto exit_kfree; } } - kind = dme1737; - name = "dme1737"; + if (kind == sch5027) { + name = "sch5027"; + } else { + kind = dme1737; + name = "dme1737"; + } data->type = kind; /* Fill in the remaining client fields and put it into the global @@ -2187,8 +2253,9 @@ static int dme1737_i2c_detect(struct i2c_adapter *adapter, int address, goto exit_kfree; } - dev_info(dev, "Found a DME1737 chip at 0x%02x (rev 0x%02x).\n", - client->addr, verstep); + dev_info(dev, "Found a %s chip at 0x%02x (rev 0x%02x).\n", + kind == sch5027 ? "SCH5027" : "DME1737", client->addr, + verstep); /* Initialize the DME1737 chip */ if ((err = dme1737_init_device(dev))) { @@ -2371,7 +2438,7 @@ static int __devinit dme1737_isa_probe(struct platform_device *pdev) goto exit_kfree; } } - data->type = -1; + data->type = sch311x; /* Fill in the remaining client fields and initialize the mutex */ strlcpy(client->name, "sch311x", I2C_NAME_SIZE); -- GitLab From 05a5e477687ac7a22c0791b3e899ed7d539f7b95 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 6 Aug 2008 22:41:04 +0200 Subject: [PATCH 0900/1024] hwmon: (f71882fg) Delete needless forward declarations These functions aren't used before being defined, so there's no point in forward-declaring them. Signed-off-by: Jean Delvare Acked-by: Hans de Goede --- drivers/hwmon/f71882fg.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index cbeb4984b5c..67067e9a323 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -87,8 +87,6 @@ static inline void superio_enter(int base); static inline void superio_select(int base, int ld); static inline void superio_exit(int base); -static inline u16 fan_from_reg ( u16 reg ); - struct f71882fg_data { unsigned short addr; struct device *hwmon_dev; @@ -116,10 +114,6 @@ struct f71882fg_data { u8 temp_diode_open; }; -static u8 f71882fg_read8(struct f71882fg_data *data, u8 reg); -static u16 f71882fg_read16(struct f71882fg_data *data, u8 reg); -static void f71882fg_write8(struct f71882fg_data *data, u8 reg, u8 val); - /* Sysfs in*/ static ssize_t show_in(struct device *dev, struct device_attribute *devattr, char *buf); -- GitLab From ad02ad85cf221c9a0574b48516762e37cceca0da Mon Sep 17 00:00:00 2001 From: Marc Hulsman Date: Wed, 6 Aug 2008 22:41:04 +0200 Subject: [PATCH 0901/1024] hwmon: (w83791d) Use fan divisor bits from vbat register Update w83791d with fan bits in vbat mon register (7.48 of the datasheet). This change allows all fans to have a divisor of 128, and fixes a problem with incorrectly reported fan speeds. Signed-off-by: Marc Hulsman Signed-off-by: Jean Delvare --- Documentation/hwmon/w83791d | 6 +++--- drivers/hwmon/w83791d.c | 24 ++++++++++++++++++++---- 2 files changed, 23 insertions(+), 7 deletions(-) diff --git a/Documentation/hwmon/w83791d b/Documentation/hwmon/w83791d index f153b2f6d62..a67d3b7a709 100644 --- a/Documentation/hwmon/w83791d +++ b/Documentation/hwmon/w83791d @@ -22,6 +22,7 @@ Credits: Additional contributors: Sven Anders + Marc Hulsman Module Parameters ----------------- @@ -67,9 +68,8 @@ on until the temperature falls below the Hysteresis value. Fan rotation speeds are reported in RPM (rotations per minute). An alarm is triggered if the rotation speed has dropped below a programmable limit. Fan -readings can be divided by a programmable divider (1, 2, 4, 8 for fan 1/2/3 -and 1, 2, 4, 8, 16, 32, 64 or 128 for fan 4/5) to give the readings more -range or accuracy. +readings can be divided by a programmable divider (1, 2, 4, 8, 16, +32, 64 or 128 for all fans) to give the readings more range or accuracy. Voltage sensors (also known as IN sensors) report their values in millivolts. An alarm is triggered if the voltage has crossed a programmable minimum diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index e4e91c9d480..daa7d121483 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -233,11 +233,9 @@ static u8 fan_to_reg(long rpm, int div) static u8 div_to_reg(int nr, long val) { int i; - int max; - /* first three fan's divisor max out at 8, rest max out at 128 */ - max = (nr < 3) ? 8 : 128; - val = SENSORS_LIMIT(val, 1, max) >> 1; + /* fan divisors max out at 128 */ + val = SENSORS_LIMIT(val, 1, 128) >> 1; for (i = 0; i < 7; i++) { if (val == 0) break; @@ -530,6 +528,7 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr, unsigned long min; u8 tmp_fan_div; u8 fan_div_reg; + u8 vbat_reg; int indx = 0; u8 keep_mask = 0; u8 new_shift = 0; @@ -581,6 +580,16 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr, w83791d_write(client, W83791D_REG_FAN_DIV[indx], fan_div_reg | tmp_fan_div); + /* Bit 2 of fans 0-2 is stored in the vbat register (bits 5-7) */ + if (nr < 3) { + keep_mask = ~(1 << (nr + 5)); + vbat_reg = w83791d_read(client, W83791D_REG_VBAT) + & keep_mask; + tmp_fan_div = (data->fan_div[nr] << (3 + nr)) & ~keep_mask; + w83791d_write(client, W83791D_REG_VBAT, + vbat_reg | tmp_fan_div); + } + /* Restore fan_min */ data->fan_min[nr] = fan_to_reg(min, DIV_FROM_REG(data->fan_div[nr])); w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]); @@ -1182,6 +1191,7 @@ static struct w83791d_data *w83791d_update_device(struct device *dev) struct w83791d_data *data = i2c_get_clientdata(client); int i, j; u8 reg_array_tmp[3]; + u8 vbat_reg; mutex_lock(&data->update_lock); @@ -1219,6 +1229,12 @@ static struct w83791d_data *w83791d_update_device(struct device *dev) data->fan_div[3] = reg_array_tmp[2] & 0x07; data->fan_div[4] = (reg_array_tmp[2] >> 4) & 0x07; + /* The fan divisor for fans 0-2 get bit 2 from + bits 5-7 respectively of vbat register */ + vbat_reg = w83791d_read(client, W83791D_REG_VBAT); + for (i = 0; i < 3; i++) + data->fan_div[i] |= (vbat_reg >> (3 + i)) & 0x04; + /* Update the first temperature sensor */ for (i = 0; i < 3; i++) { data->temp1[i] = w83791d_read(client, -- GitLab From a95a5ed856e902e513119d4cc5b745faa202f761 Mon Sep 17 00:00:00 2001 From: Dominik Geyer Date: Wed, 6 Aug 2008 22:41:04 +0200 Subject: [PATCH 0902/1024] hwmon: (w83627hf) Add pwm_enable sysfs interface Adds support for pwm_enable sysfs interface for the w83627hf driver. Signed-off-by: Dominik Geyer Signed-off-by: Jean Delvare --- drivers/hwmon/w83627hf.c | 74 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 9564fb06995..ba8b069b108 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -209,6 +209,13 @@ static const u16 w83627hf_reg_temp_over[] = { 0x39, 0x155, 0x255 }; #define W83627HF_REG_PWM1 0x5A #define W83627HF_REG_PWM2 0x5B +static const u8 W83627THF_REG_PWM_ENABLE[] = { + 0x04, /* FAN 1 mode */ + 0x04, /* FAN 2 mode */ + 0x12, /* FAN AUX mode */ +}; +static const u8 W83627THF_PWM_ENABLE_SHIFT[] = { 2, 4, 1 }; + #define W83627THF_REG_PWM1 0x01 /* 697HF/637HF/687THF too */ #define W83627THF_REG_PWM2 0x03 /* 697HF/637HF/687THF too */ #define W83627THF_REG_PWM3 0x11 /* 637HF/687THF too */ @@ -366,6 +373,9 @@ struct w83627hf_data { u32 alarms; /* Register encoding, combined */ u32 beep_mask; /* Register encoding, combined */ u8 pwm[3]; /* Register value */ + u8 pwm_enable[3]; /* 1 = manual + 2 = thermal cruise (also called SmartFan I) + 3 = fan speed cruise */ u8 pwm_freq[3]; /* Register value */ u16 sens[3]; /* 1 = pentium diode; 2 = 3904 diode; 4 = thermistor */ @@ -956,6 +966,42 @@ static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0); static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 1); static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 2); +static ssize_t +show_pwm_enable(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = w83627hf_update_device(dev); + return sprintf(buf, "%d\n", data->pwm_enable[nr]); +} + +static ssize_t +store_pwm_enable(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + int nr = to_sensor_dev_attr(devattr)->index; + struct w83627hf_data *data = dev_get_drvdata(dev); + unsigned long val = simple_strtoul(buf, NULL, 10); + u8 reg; + + if (!val || (val > 3)) /* modes 1, 2 and 3 are supported */ + return -EINVAL; + mutex_lock(&data->update_lock); + data->pwm_enable[nr] = val; + reg = w83627hf_read_value(data, W83627THF_REG_PWM_ENABLE[nr]); + reg &= ~(0x03 << W83627THF_PWM_ENABLE_SHIFT[nr]); + reg |= (val - 1) << W83627THF_PWM_ENABLE_SHIFT[nr]; + w83627hf_write_value(data, W83627THF_REG_PWM_ENABLE[nr], reg); + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 0); +static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 1); +static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable, + store_pwm_enable, 2); + static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -1223,6 +1269,11 @@ static struct attribute *w83627hf_attributes_opt[] = { &sensor_dev_attr_pwm1_freq.dev_attr.attr, &sensor_dev_attr_pwm2_freq.dev_attr.attr, &sensor_dev_attr_pwm3_freq.dev_attr.attr, + + &sensor_dev_attr_pwm1_enable.dev_attr.attr, + &sensor_dev_attr_pwm2_enable.dev_attr.attr, + &sensor_dev_attr_pwm3_enable.dev_attr.attr, + NULL }; @@ -1366,6 +1417,19 @@ static int __devinit w83627hf_probe(struct platform_device *pdev) &sensor_dev_attr_pwm3_freq.dev_attr))) goto ERROR4; + if (data->type != w83627hf) + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm1_enable.dev_attr)) + || (err = device_create_file(dev, + &sensor_dev_attr_pwm2_enable.dev_attr))) + goto ERROR4; + + if (data->type == w83627thf || data->type == w83637hf + || data->type == w83687thf) + if ((err = device_create_file(dev, + &sensor_dev_attr_pwm3_enable.dev_attr))) + goto ERROR4; + data->hwmon_dev = hwmon_device_register(dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); @@ -1655,6 +1719,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev) { struct w83627hf_data *data = dev_get_drvdata(dev); int i, num_temps = (data->type == w83697hf) ? 2 : 3; + int num_pwms = (data->type == w83697hf) ? 2 : 3; mutex_lock(&data->update_lock); @@ -1707,6 +1772,15 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev) break; } } + if (data->type != w83627hf) { + for (i = 0; i < num_pwms; i++) { + u8 tmp = w83627hf_read_value(data, + W83627THF_REG_PWM_ENABLE[i]); + data->pwm_enable[i] = + ((tmp >> W83627THF_PWM_ENABLE_SHIFT[i]) + & 0x03) + 1; + } + } for (i = 0; i < num_temps; i++) { data->temp[i] = w83627hf_read_value( data, w83627hf_reg_temp[i]); -- GitLab From 2f8ea97a45e9db382787dd7afa7f500ee661aa7b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 6 Aug 2008 22:41:04 +0200 Subject: [PATCH 0903/1024] hwmon: (w83627hf) Drop reset module parameter Drop the reset parameter of the w83627hf driver. It seems it wasn't that useful. It was dropped from the Linux 2.4 version of this driver back in July 2004. The only users who have reported that they were still using this parameter, needed it to switch the chip from automatic fan speed control back to manual mode. Now that the driver creates pwmN_enable sysfs files, users will be able to use these files instead, which is way less agressive. Signed-off-by: Jean Delvare Acked-by: Dominik Geyer --- Documentation/hwmon/w83627hf | 4 ---- drivers/hwmon/w83627hf.c | 27 --------------------------- 2 files changed, 31 deletions(-) diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf index 880a59f53da..6ee36dbafd6 100644 --- a/Documentation/hwmon/w83627hf +++ b/Documentation/hwmon/w83627hf @@ -40,10 +40,6 @@ Module Parameters (default is 1) Use 'init=0' to bypass initializing the chip. Try this if your computer crashes when you load the module. -* reset: int - (default is 0) - The driver used to reset the chip on load, but does no more. Use - 'reset=1' to restore the old behavior. Report if you need to do this. Description ----------- diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index ba8b069b108..b30e5796cb2 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -67,10 +67,6 @@ module_param(force_i2c, byte, 0); MODULE_PARM_DESC(force_i2c, "Initialize the i2c address of the sensors"); -static int reset; -module_param(reset, bool, 0); -MODULE_PARM_DESC(reset, "Set to one to reset chip on load"); - static int init = 1; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); @@ -1600,29 +1596,6 @@ static void __devinit w83627hf_init_device(struct platform_device *pdev) enum chips type = data->type; u8 tmp; - if (reset) { - /* Resetting the chip has been the default for a long time, - but repeatedly caused problems (fans going to full - speed...) so it is now optional. It might even go away if - nobody reports it as being useful, as I see very little - reason why this would be needed at all. */ - dev_info(&pdev->dev, "If reset=1 solved a problem you were " - "having, please report!\n"); - - /* save this register */ - i = w83627hf_read_value(data, W83781D_REG_BEEP_CONFIG); - /* Reset all except Watchdog values and last conversion values - This sets fan-divs to 2, among others */ - w83627hf_write_value(data, W83781D_REG_CONFIG, 0x80); - /* Restore the register and disable power-on abnormal beep. - This saves FAN 1/2/3 input/output values set by BIOS. */ - w83627hf_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80); - /* Disable master beep-enable (reset turns it on). - Individual beeps should be reset to off but for some reason - disabling this bit helps some people not get beeped */ - w83627hf_write_value(data, W83781D_REG_BEEP_INTS2, 0); - } - /* Minimize conflicts with other winbond i2c-only clients... */ /* disable i2c subclients... how to disable main i2c client?? */ /* force i2c address to relatively uncommon address */ -- GitLab From 68f823de3f1916cc0694376330c08377706b877d Mon Sep 17 00:00:00 2001 From: Grant Coady Date: Wed, 6 Aug 2008 22:41:05 +0200 Subject: [PATCH 0904/1024] hwmon: (adm9240) Remove EXPERIMENTAL dependency The adm9240 driver is in the kernel for three years now, time to remove the EXPERIMENTAL dependency. Signed-off-by: Grant Coady Signed-off-by: Jean Delvare --- drivers/hwmon/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 1de240a26fc..7fe39289990 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -124,7 +124,7 @@ config SENSORS_ADM1031 config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" - depends on I2C && EXPERIMENTAL + depends on I2C select HWMON_VID help If you say yes here you get support for Analog Devices ADM9240, -- GitLab From 84f768c1633cfc547d82b9dc671ffea2f3785542 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 6 Aug 2008 22:41:05 +0200 Subject: [PATCH 0905/1024] hwmon: (thmc50) Add support for critical temperature limits Add critical temperature limits to the driver. These limits are read only. Signed-off-by: Krzysztof Helt Signed-off-by: Jean Delvare --- drivers/hwmon/thmc50.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c index 3b01001108c..7d97431e132 100644 --- a/drivers/hwmon/thmc50.c +++ b/drivers/hwmon/thmc50.c @@ -55,8 +55,11 @@ I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs " static const u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 }; static const u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C }; static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B }; +static const u8 THMC50_REG_TEMP_CRITICAL[] = { 0x13, 0x14, 0x14 }; +static const u8 THMC50_REG_TEMP_DEFAULT[] = { 0x17, 0x18, 0x18 }; #define THMC50_REG_CONF_nFANOFF 0x20 +#define THMC50_REG_CONF_PROGRAMMED 0x08 /* Each client has this additional data */ struct thmc50_data { @@ -72,6 +75,7 @@ struct thmc50_data { s8 temp_input[3]; s8 temp_max[3]; s8 temp_min[3]; + s8 temp_critical[3]; u8 analog_out; u8 alarms; }; @@ -199,6 +203,15 @@ static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, return count; } +static ssize_t show_temp_critical(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + int nr = to_sensor_dev_attr(attr)->index; + struct thmc50_data *data = thmc50_update_device(dev); + return sprintf(buf, "%d\n", data->temp_critical[nr] * 1000); +} + static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, char *buf) { @@ -214,7 +227,9 @@ static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp, \ static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ show_temp_min, set_temp_min, offset - 1); \ static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ - show_temp_max, set_temp_max, offset - 1); + show_temp_max, set_temp_max, offset - 1); \ +static SENSOR_DEVICE_ATTR(temp##offset##_crit, S_IRUGO, \ + show_temp_critical, NULL, offset - 1); temp_reg(1); temp_reg(2); @@ -234,10 +249,12 @@ static struct attribute *thmc50_attributes[] = { &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_min.dev_attr.attr, &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_crit.dev_attr.attr, &sensor_dev_attr_temp1_alarm.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, &sensor_dev_attr_temp2_min.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, &sensor_dev_attr_temp2_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, &sensor_dev_attr_pwm1.dev_attr.attr, @@ -254,6 +271,7 @@ static struct attribute *temp3_attributes[] = { &sensor_dev_attr_temp3_max.dev_attr.attr, &sensor_dev_attr_temp3_min.dev_attr.attr, &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_crit.dev_attr.attr, &sensor_dev_attr_temp3_alarm.dev_attr.attr, &sensor_dev_attr_temp3_fault.dev_attr.attr, NULL @@ -429,6 +447,10 @@ static struct thmc50_data *thmc50_update_device(struct device *dev) int temps = data->has_temp3 ? 3 : 2; int i; + int prog = i2c_smbus_read_byte_data(client, THMC50_REG_CONF); + + prog &= THMC50_REG_CONF_PROGRAMMED; + for (i = 0; i < temps; i++) { data->temp_input[i] = i2c_smbus_read_byte_data(client, THMC50_REG_TEMP[i]); @@ -436,6 +458,10 @@ static struct thmc50_data *thmc50_update_device(struct device *dev) THMC50_REG_TEMP_MAX[i]); data->temp_min[i] = i2c_smbus_read_byte_data(client, THMC50_REG_TEMP_MIN[i]); + data->temp_critical[i] = + i2c_smbus_read_byte_data(client, + prog ? THMC50_REG_TEMP_CRITICAL[i] + : THMC50_REG_TEMP_DEFAULT[i]); } data->analog_out = i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT); -- GitLab From 6c633c3025c75f5fcf3a76d375faff34e3be021b Mon Sep 17 00:00:00 2001 From: Sean MacLennan Date: Wed, 6 Aug 2008 22:41:05 +0200 Subject: [PATCH 0906/1024] hwmon: ad7414 driver Driver for the Analog Devices AD7414 temperature monitoring chip. Signed-off-by: Sean MacLennan Signed-off-by: Jean Delvare --- drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/ad7414.c | 268 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 279 insertions(+) create mode 100644 drivers/hwmon/ad7414.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 7fe39289990..bf4ebfb86fa 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -57,6 +57,16 @@ config SENSORS_ABITUGURU3 This driver can also be built as a module. If so, the module will be called abituguru3. +config SENSORS_AD7414 + tristate "Analog Devices AD7414" + depends on I2C && EXPERIMENTAL + help + If you say yes here you get support for the Analog Devices + AD7414 temperature monitoring chip. + + This driver can also be built as a module. If so, the module + will be called ad7414. + config SENSORS_AD7418 tristate "Analog Devices AD7416, AD7417 and AD7418" depends on I2C && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index d098677e08d..7943e5cefb0 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_SENSORS_W83791D) += w83791d.o obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o +obj-$(CONFIG_SENSORS_AD7414) += ad7414.o obj-$(CONFIG_SENSORS_AD7418) += ad7418.o obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c new file mode 100644 index 00000000000..ce8d94fbfd7 --- /dev/null +++ b/drivers/hwmon/ad7414.c @@ -0,0 +1,268 @@ +/* + * An hwmon driver for the Analog Devices AD7414 + * + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * Copyright (c) 2008 PIKA Technologies + * Sean MacLennan + * + * Copyright (c) 2008 Spansion Inc. + * Frank Edelhaeuser + * (converted to "new style" I2C driver model, removed checkpatch.pl warnings) + * + * Based on ad7418.c + * Copyright 2006 Tower Technologies, Alessandro Zummo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + + +/* AD7414 registers */ +#define AD7414_REG_TEMP 0x00 +#define AD7414_REG_CONF 0x01 +#define AD7414_REG_T_HIGH 0x02 +#define AD7414_REG_T_LOW 0x03 + +static u8 AD7414_REG_LIMIT[] = { AD7414_REG_T_HIGH, AD7414_REG_T_LOW }; + +struct ad7414_data { + struct device *hwmon_dev; + struct mutex lock; /* atomic read data updates */ + char valid; /* !=0 if following fields are valid */ + unsigned long next_update; /* In jiffies */ + s16 temp_input; /* Register values */ + s8 temps[ARRAY_SIZE(AD7414_REG_LIMIT)]; +}; + +/* REG: (0.25C/bit, two's complement) << 6 */ +static inline int ad7414_temp_from_reg(s16 reg) +{ + /* use integer division instead of equivalent right shift to + * guarantee arithmetic shift and preserve the sign + */ + return ((int)reg / 64) * 250; +} + +static inline int ad7414_read(struct i2c_client *client, u8 reg) +{ + if (reg == AD7414_REG_TEMP) { + int value = i2c_smbus_read_word_data(client, reg); + return (value < 0) ? value : swab16(value); + } else + return i2c_smbus_read_byte_data(client, reg); +} + +static inline int ad7414_write(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +struct ad7414_data *ad7414_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ad7414_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->lock); + + if (time_after(jiffies, data->next_update) || !data->valid) { + int value, i; + + dev_dbg(&client->dev, "starting ad7414 update\n"); + + value = ad7414_read(client, AD7414_REG_TEMP); + if (value < 0) + dev_dbg(&client->dev, "AD7414_REG_TEMP err %d\n", + value); + else + data->temp_input = value; + + for (i = 0; i < ARRAY_SIZE(AD7414_REG_LIMIT); ++i) { + value = ad7414_read(client, AD7414_REG_LIMIT[i]); + if (value < 0) + dev_dbg(&client->dev, "AD7414 reg %d err %d\n", + AD7414_REG_LIMIT[i], value); + else + data->temps[i] = value; + } + + data->next_update = jiffies + HZ + HZ / 2; + data->valid = 1; + } + + mutex_unlock(&data->lock); + + return data; +} + +static ssize_t show_temp_input(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7414_data *data = ad7414_update_device(dev); + return sprintf(buf, "%d\n", ad7414_temp_from_reg(data->temp_input)); +} +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL, 0); + +static ssize_t show_max_min(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int index = to_sensor_dev_attr(attr)->index; + struct ad7414_data *data = ad7414_update_device(dev); + return sprintf(buf, "%d\n", data->temps[index] * 1000); +} + +static ssize_t set_max_min(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ad7414_data *data = i2c_get_clientdata(client); + int index = to_sensor_dev_attr(attr)->index; + u8 reg = AD7414_REG_LIMIT[index]; + long temp = simple_strtol(buf, NULL, 10); + + temp = SENSORS_LIMIT(temp, -40000, 85000); + temp = (temp + (temp < 0 ? -500 : 500)) / 1000; + + mutex_lock(&data->lock); + data->temps[index] = temp; + ad7414_write(client, reg, temp); + mutex_unlock(&data->lock); + return count; +} + +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, + show_max_min, set_max_min, 0); +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, + show_max_min, set_max_min, 1); + +static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int bitnr = to_sensor_dev_attr(attr)->index; + struct ad7414_data *data = ad7414_update_device(dev); + int value = (data->temp_input >> bitnr) & 1; + return sprintf(buf, "%d\n", value); +} + +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 4); + +static struct attribute *ad7414_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group ad7414_group = { + .attrs = ad7414_attributes, +}; + +static int ad7414_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct ad7414_data *data; + int conf; + int err = 0; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_READ_WORD_DATA)) + goto exit; + + data = kzalloc(sizeof(struct ad7414_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "chip found\n"); + + /* Make sure the chip is powered up. */ + conf = i2c_smbus_read_byte_data(client, AD7414_REG_CONF); + if (conf < 0) + dev_warn(&client->dev, + "ad7414_probe unable to read config register.\n"); + else { + conf &= ~(1 << 7); + i2c_smbus_write_byte_data(client, AD7414_REG_CONF, conf); + } + + /* Register sysfs hooks */ + err = sysfs_create_group(&client->dev.kobj, &ad7414_group); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &ad7414_group); +exit_free: + kfree(data); +exit: + return err; +} + +static int __devexit ad7414_remove(struct i2c_client *client) +{ + struct ad7414_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &ad7414_group); + kfree(data); + return 0; +} + +static const struct i2c_device_id ad7414_id[] = { + { "ad7414", 0 }, + {} +}; + +static struct i2c_driver ad7414_driver = { + .driver = { + .name = "ad7414", + }, + .probe = ad7414_probe, + .remove = __devexit_p(ad7414_remove), + .id_table = ad7414_id, +}; + +static int __init ad7414_init(void) +{ + return i2c_add_driver(&ad7414_driver); +} +module_init(ad7414_init); + +static void __exit ad7414_exit(void) +{ + i2c_del_driver(&ad7414_driver); +} +module_exit(ad7414_exit); + +MODULE_AUTHOR("Stefan Roese , " + "Frank Edelhaeuser "); + +MODULE_DESCRIPTION("AD7414 driver"); +MODULE_LICENSE("GPL"); -- GitLab From 15872212e876de9ae404108e4ad231a645b55b54 Mon Sep 17 00:00:00 2001 From: Frank Myhr Date: Wed, 6 Aug 2008 22:41:06 +0200 Subject: [PATCH 0907/1024] hwmon: (hwmon-vid) Trivial format multi-line comments per CodingStyle Signed-off-by: Frank Myhr Signed-off-by: Jean Delvare --- drivers/hwmon/hwmon-vid.c | 140 +++++++++++++++++++------------------- 1 file changed, 71 insertions(+), 69 deletions(-) diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index 3330667280b..ed78a72e726 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -1,76 +1,78 @@ /* - hwmon-vid.c - VID/VRM/VRD voltage conversions - - Copyright (c) 2004 Rudolf Marek - - Partly imported from i2c-vid.h of the lm_sensors project - Copyright (c) 2002 Mark D. Studebaker - With assistance from Trent Piepho - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ + * hwmon-vid.c - VID/VRM/VRD voltage conversions + * + * Copyright (c) 2004 Rudolf Marek + * + * Partly imported from i2c-vid.h of the lm_sensors project + * Copyright (c) 2002 Mark D. Studebaker + * With assistance from Trent Piepho + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ #include #include #include /* - Common code for decoding VID pins. - - References: - - For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines", - available at http://developer.intel.com/. - - For VRD 10.0 and up, "VRD x.y Design Guide", - available at http://developer.intel.com/. - - AMD Opteron processors don't follow the Intel specifications. - I'm going to "make up" 2.4 as the spec number for the Opterons. - No good reason just a mnemonic for the 24x Opteron processor - series. - - Opteron VID encoding is: - 00000 = 1.550 V - 00001 = 1.525 V - . . . . - 11110 = 0.800 V - 11111 = 0.000 V (off) - - The 17 specification is in fact Intel Mobile Voltage Positioning - - (IMVP-II). You can find more information in the datasheet of Max1718 - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452 - - The 13 specification corresponds to the Intel Pentium M series. There - doesn't seem to be any named specification for these. The conversion - tables are detailed directly in the various Pentium M datasheets: - http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm - - The 14 specification corresponds to Intel Core series. There - doesn't seem to be any named specification for these. The conversion - tables are detailed directly in the various Pentium Core datasheets: - http://www.intel.com/design/mobile/datashts/309221.htm - - The 110 (VRM 11) specification corresponds to Intel Conroe based series. - http://www.intel.com/design/processor/applnots/313214.htm -*/ - -/* vrm is the VRM/VRD document version multiplied by 10. - val is the 4-bit or more VID code. - Returned value is in mV to avoid floating point in the kernel. - Some VID have some bits in uV scale, this is rounded to mV */ + * Common code for decoding VID pins. + * + * References: + * + * For VRM 8.4 to 9.1, "VRM x.y DC-DC Converter Design Guidelines", + * available at http://developer.intel.com/. + * + * For VRD 10.0 and up, "VRD x.y Design Guide", + * available at http://developer.intel.com/. + * + * AMD Opteron processors don't follow the Intel specifications. + * I'm going to "make up" 2.4 as the spec number for the Opterons. + * No good reason just a mnemonic for the 24x Opteron processor + * series. + * + * Opteron VID encoding is: + * 00000 = 1.550 V + * 00001 = 1.525 V + * . . . . + * 11110 = 0.800 V + * 11111 = 0.000 V (off) + * + * The 17 specification is in fact Intel Mobile Voltage Positioning - + * (IMVP-II). You can find more information in the datasheet of Max1718 + * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452 + * + * The 13 specification corresponds to the Intel Pentium M series. There + * doesn't seem to be any named specification for these. The conversion + * tables are detailed directly in the various Pentium M datasheets: + * http://www.intel.com/design/intarch/pentiumm/docs_pentiumm.htm + * + * The 14 specification corresponds to Intel Core series. There + * doesn't seem to be any named specification for these. The conversion + * tables are detailed directly in the various Pentium Core datasheets: + * http://www.intel.com/design/mobile/datashts/309221.htm + * + * The 110 (VRM 11) specification corresponds to Intel Conroe based series. + * http://www.intel.com/design/processor/applnots/313214.htm + */ + +/* + * vrm is the VRM/VRD document version multiplied by 10. + * val is the 4-bit or more VID code. + * Returned value is in mV to avoid floating point in the kernel. + * Some VID have some bits in uV scale, this is rounded to mV. + */ int vid_from_reg(int val, u8 vrm) { int vid; @@ -141,9 +143,9 @@ int vid_from_reg(int val, u8 vrm) /* - After this point is the code to automatically determine which - VRM/VRD specification should be used depending on the CPU. -*/ + * After this point is the code to automatically determine which + * VRM/VRD specification should be used depending on the CPU. + */ struct vrm_model { u8 vendor; -- GitLab From 116d0486bdefc11f71e567cadf0c47f788b4dd06 Mon Sep 17 00:00:00 2001 From: Frank Myhr Date: Wed, 6 Aug 2008 22:41:06 +0200 Subject: [PATCH 0908/1024] hwmon: (hwmon-vid) Add 6-bit vid codes for AMD NPT 0Fh cpus AMD NPT 0Fh cpus use 6 bit VID codes. Successive codes with msb 0 describe 25mV decrements, while those with msb 1 describe 12.5mV decrements. Existing hwmon-vid.c is correct only for codes with msb 0; add support for the codes with msb 1. Ref: p 309, Table 71 AMD Publication 32559, BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf Signed-off-by: Frank Myhr Signed-off-by: Jean Delvare --- drivers/hwmon/hwmon-vid.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index ed78a72e726..7b0a32c4dcf 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -37,18 +37,14 @@ * For VRD 10.0 and up, "VRD x.y Design Guide", * available at http://developer.intel.com/. * + * AMD NPT 0Fh (Athlon64 & Opteron), AMD Publication 32559, + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf + * Table 71. VID Code Voltages * AMD Opteron processors don't follow the Intel specifications. * I'm going to "make up" 2.4 as the spec number for the Opterons. * No good reason just a mnemonic for the 24x Opteron processor * series. * - * Opteron VID encoding is: - * 00000 = 1.550 V - * 00001 = 1.525 V - * . . . . - * 11110 = 0.800 V - * 11111 = 0.000 V (off) - * * The 17 specification is in fact Intel Mobile Voltage Positioning - * (IMVP-II). You can find more information in the datasheet of Max1718 * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2452 @@ -98,9 +94,11 @@ int vid_from_reg(int val, u8 vrm) if (val < 0x02 || val > 0xb2) return 0; return((1600000 - (val - 2) * 6250 + 500) / 1000); - case 24: /* Opteron processor */ - val &= 0x1f; - return(val == 0x1f ? 0 : 1550 - val * 25); + + case 24: /* AMD NPT 0Fh (Athlon64 & Opteron) */ + val &= 0x3f; + return (val < 32) ? 1550 - 25 * val + : 775 - (25 * (val - 31)) / 2; case 91: /* VRM 9.1 */ case 90: /* VRM 9.0 */ -- GitLab From 0475169c13e177e1af5a02f5e9f30fda13dc0b86 Mon Sep 17 00:00:00 2001 From: Andrew Paprocki Date: Wed, 6 Aug 2008 22:41:06 +0200 Subject: [PATCH 0909/1024] hwmon: (it87) Support for 16-bit fan reading in it8712 >= rev 0x07 The it8712 chip supports 16-bit fan tachometers in revisions >= 0x07. Revisions >= 0x08 dropped support for 8-bit fan divisor registers. The patch enables 16-bit fan readings on all revisions >= 0x07 just like the it8716 and it8718 chips. Signed-off-by: Andrew Paprocki Signed-off-by: Jean Delvare --- Documentation/hwmon/it87 | 9 +++++---- drivers/hwmon/it87.c | 32 ++++++++++++++++++++++---------- 2 files changed, 27 insertions(+), 14 deletions(-) diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index f4ce1fdbeff..d931525f3f3 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -11,7 +11,9 @@ Supported chips: Prefix: 'it8712' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website - http://www.ite.com.tw/ + http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.1.pdf + http://www.ite.com.tw/product_info/file/pc/Errata%20V0.1%20for%20IT8712F%20V0.9.1.pdf + http://www.ite.com.tw/product_info/file/pc/IT8712F_V0.9.3.pdf * IT8716F/IT8726F Prefix: 'it8716' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -90,14 +92,13 @@ upper VID bits share their pins with voltage inputs (in5 and in6) so you can't have both on a given board. The IT8716F, IT8718F and later IT8712F revisions have support for -2 additional fans. They are supported by the driver for the IT8716F and -IT8718F but not for the IT8712F +2 additional fans. The additional fans are supported by the driver. The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This is better (no more fan clock divider mess) but not compatible with the older chips and revisions. For now, the driver only uses the 16-bit mode on the -IT8716F and IT8718F. +late IT8712F, IT8716F and IT8718F. The IT8726F is just bit enhanced IT8716F with additional hardware for AMD power sequencing. Therefore the chip will appear as IT8716F diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index e12c132ff83..2a365681f96 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -151,9 +151,9 @@ static int fix_pwm_polarity; /* The IT8718F has the VID value in a different register, in Super-I/O configuration space. */ #define IT87_REG_VID 0x0a -/* Warning: register 0x0b is used for something completely different in - new chips/revisions. I suspect only 16-bit tachometer mode will work - for these. */ +/* The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b + for fan divisors. Later IT8712F revisions must use 16-bit tachometer + mode. */ #define IT87_REG_FAN_DIV 0x0b #define IT87_REG_FAN_16BIT 0x0c @@ -234,6 +234,7 @@ static const unsigned int pwm_freq[8] = { struct it87_sio_data { enum chips type; /* Values read from Super-I/O config space */ + u8 revision; u8 vid_value; }; @@ -242,6 +243,7 @@ struct it87_sio_data { struct it87_data { struct device *hwmon_dev; enum chips type; + u8 revision; unsigned short addr; const char *name; @@ -268,6 +270,14 @@ struct it87_data { u8 manual_pwm_ctl[3]; /* manual PWM value set by user */ }; +static inline int has_16bit_fans(const struct it87_data *data) +{ + /* IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I. + This is the first revision with 16bit tachometer support. */ + return (data->type == it8712 && data->revision >= 0x07) + || data->type == it8716 + || data->type == it8718; +} static int it87_probe(struct platform_device *pdev); static int __devexit it87_remove(struct platform_device *pdev); @@ -991,8 +1001,9 @@ static int __init it87_find(unsigned short *address, } err = 0; + sio_data->revision = superio_inb(DEVREV) & 0x0f; pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n", - chip_type, *address, superio_inb(DEVREV) & 0x0f); + chip_type, *address, sio_data->revision); /* Read GPIO config and VID value from LDN 7 (GPIO) */ if (chip_type != IT8705F_DEVID) { @@ -1045,6 +1056,7 @@ static int __devinit it87_probe(struct platform_device *pdev) data->addr = res->start; data->type = sio_data->type; + data->revision = sio_data->revision; data->name = names[sio_data->type]; /* Now, we do the remaining detection. */ @@ -1069,7 +1081,7 @@ static int __devinit it87_probe(struct platform_device *pdev) goto ERROR2; /* Do not create fan files for disabled fans */ - if (data->type == it8716 || data->type == it8718) { + if (has_16bit_fans(data)) { /* 16-bit tachometers */ if (data->has_fan & (1 << 0)) { if ((err = device_create_file(dev, @@ -1350,7 +1362,7 @@ static void __devinit it87_init_device(struct platform_device *pdev) data->has_fan = (data->fan_main_ctrl >> 4) & 0x07; /* Set tachometers to 16-bit mode if needed */ - if (data->type == it8716 || data->type == it8718) { + if (has_16bit_fans(data)) { tmp = it87_read_value(data, IT87_REG_FAN_16BIT); if (~tmp & 0x07 & data->has_fan) { dev_dbg(&pdev->dev, @@ -1426,7 +1438,7 @@ static struct it87_data *it87_update_device(struct device *dev) data->fan[i] = it87_read_value(data, IT87_REG_FAN[i]); /* Add high byte if in 16-bit mode */ - if (data->type == it8716 || data->type == it8718) { + if (has_16bit_fans(data)) { data->fan[i] |= it87_read_value(data, IT87_REG_FANX[i]) << 8; data->fan_min[i] |= it87_read_value(data, @@ -1443,8 +1455,7 @@ static struct it87_data *it87_update_device(struct device *dev) } /* Newer chips don't have clock dividers */ - if ((data->has_fan & 0x07) && data->type != it8716 - && data->type != it8718) { + if ((data->has_fan & 0x07) && !has_16bit_fans(data)) { i = it87_read_value(data, IT87_REG_FAN_DIV); data->fan_div[0] = i & 0x07; data->fan_div[1] = (i >> 3) & 0x07; @@ -1460,7 +1471,8 @@ static struct it87_data *it87_update_device(struct device *dev) data->fan_ctl = it87_read_value(data, IT87_REG_FAN_CTL); data->sensor = it87_read_value(data, IT87_REG_TEMP_ENABLE); - /* The 8705 does not have VID capability */ + /* The 8705 does not have VID capability. + The 8718 does not use IT87_REG_VID for the same purpose. */ if (data->type == it8712 || data->type == it8716) { data->vid = it87_read_value(data, IT87_REG_VID); /* The older IT8712F revisions had only 5 VID pins, -- GitLab From 816d8c6a2580562698cf0fa0b9e5b4dd570e636e Mon Sep 17 00:00:00 2001 From: Andrew Paprocki Date: Wed, 6 Aug 2008 22:41:06 +0200 Subject: [PATCH 0910/1024] hwmon: (it87) Support for 16-bit fan reading in it8705 >= rev 0x03 The it8705 chip supports 16-bit fan tachometers in revisions at least >= 0x03 (Version G). This patch enables 16-bit fan readings on all revisions >= 0x03 just like the it8712, it8716, and it8718 chips. Signed-off-by: Andrew Paprocki Signed-off-by: Jean Delvare --- Documentation/hwmon/it87 | 6 +++--- drivers/hwmon/it87.c | 19 ++++++++++++------- 2 files changed, 15 insertions(+), 10 deletions(-) diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index d931525f3f3..3496b7020e7 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -6,7 +6,7 @@ Supported chips: Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) Datasheet: Publicly available at the ITE website - http://www.ite.com.tw/ + http://www.ite.com.tw/product_info/file/pc/IT8705F_V.0.4.1.pdf * IT8712F Prefix: 'it8712' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -97,8 +97,8 @@ The IT8716F, IT8718F and later IT8712F revisions have support for The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional 16-bit tachometer counters for fans 1 to 3. This is better (no more fan clock divider mess) but not compatible with the older chips and -revisions. For now, the driver only uses the 16-bit mode on the -late IT8712F, IT8716F and IT8718F. +revisions. The 16-bit tachometer mode is enabled by the driver when one +of the above chips is detected. The IT8726F is just bit enhanced IT8716F with additional hardware for AMD power sequencing. Therefore the chip will appear as IT8716F diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 2a365681f96..30cdb095677 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -272,9 +272,11 @@ struct it87_data { static inline int has_16bit_fans(const struct it87_data *data) { - /* IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I. - This is the first revision with 16bit tachometer support. */ - return (data->type == it8712 && data->revision >= 0x07) + /* IT8705F Datasheet 0.4.1, 3h == Version G. + IT8712F Datasheet 0.9.1, section 8.3.5 indicates 7h == Version I. + These are the first revisions with 16bit tachometer support. */ + return (data->type == it87 && data->revision >= 0x03) + || (data->type == it8712 && data->revision >= 0x07) || data->type == it8716 || data->type == it8718; } @@ -1370,10 +1372,13 @@ static void __devinit it87_init_device(struct platform_device *pdev) it87_write_value(data, IT87_REG_FAN_16BIT, tmp | 0x07); } - if (tmp & (1 << 4)) - data->has_fan |= (1 << 3); /* fan4 enabled */ - if (tmp & (1 << 5)) - data->has_fan |= (1 << 4); /* fan5 enabled */ + /* IT8705F only supports three fans. */ + if (data->type != it87) { + if (tmp & (1 << 4)) + data->has_fan |= (1 << 3); /* fan4 enabled */ + if (tmp & (1 << 5)) + data->has_fan |= (1 << 4); /* fan5 enabled */ + } } /* Set current fan mode registers and the default settings for the -- GitLab From 680db0136e0778a0d7e025af7572c6a8d82279e2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 6 Aug 2008 15:14:13 -0700 Subject: [PATCH 0911/1024] pcm_native.c: remove unused label This fixes the warning sound/core/pcm_native.c: In function 'snd_pcm_fasync': sound/core/pcm_native.c:3262: warning: label 'out' defined but not used Signed-off-by: Linus Torvalds --- sound/core/pcm_native.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index c49b9d9e303..333cff68c15 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -3259,7 +3259,6 @@ static int snd_pcm_fasync(int fd, struct file * file, int on) runtime = substream->runtime; err = fasync_helper(fd, file, on, &runtime->fasync); -out: unlock_kernel(); if (err < 0) return err; -- GitLab From 3fe5c1dd0a8bf3756c447a28a578593176949d1d Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 2 Aug 2008 07:26:12 -0400 Subject: [PATCH 0912/1024] spin off cifs_setattr with unix extensions to its own function Create a new cifs_setattr_unix function to handle a setattr when unix extensions are enabled and have cifs_setattr call it. Also, clean up variable declarations in cifs_setattr. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/inode.c | 157 ++++++++++++++++++++++++++++++++++++------------ 1 file changed, 119 insertions(+), 38 deletions(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 6d911896d74..f68d1abe13e 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1504,30 +1504,138 @@ cifs_set_file_size(struct inode *inode, struct iattr *attrs, return rc; } +static int +cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs) +{ + int rc; + int xid; + char *full_path = NULL; + struct inode *inode = direntry->d_inode; + struct cifsInodeInfo *cifsInode = CIFS_I(inode); + struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); + struct cifsTconInfo *pTcon = cifs_sb->tcon; + struct cifs_unix_set_info_args *args = NULL; + + cFYI(1, ("setattr_unix on file %s attrs->ia_valid=0x%x", + direntry->d_name.name, attrs->ia_valid)); + + xid = GetXid(); + + if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) { + /* check if we have permission to change attrs */ + rc = inode_change_ok(inode, attrs); + if (rc < 0) + goto out; + else + rc = 0; + } + + full_path = build_path_from_dentry(direntry); + if (full_path == NULL) { + rc = -ENOMEM; + goto out; + } + + if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) { + /* + Flush data before changing file size or changing the last + write time of the file on the server. If the + flush returns error, store it to report later and continue. + BB: This should be smarter. Why bother flushing pages that + will be truncated anyway? Also, should we error out here if + the flush returns error? + */ + rc = filemap_write_and_wait(inode->i_mapping); + if (rc != 0) { + cifsInode->write_behind_rc = rc; + rc = 0; + } + } + + if (attrs->ia_valid & ATTR_SIZE) { + rc = cifs_set_file_size(inode, attrs, xid, full_path); + if (rc != 0) + goto out; + } + + /* skip mode change if it's just for clearing setuid/setgid */ + if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) + attrs->ia_valid &= ~ATTR_MODE; + + args = kmalloc(sizeof(*args), GFP_KERNEL); + if (args == NULL) { + rc = -ENOMEM; + goto out; + } + + /* set up the struct */ + if (attrs->ia_valid & ATTR_MODE) + args->mode = attrs->ia_mode; + else + args->mode = NO_CHANGE_64; + + if (attrs->ia_valid & ATTR_UID) + args->uid = attrs->ia_uid; + else + args->uid = NO_CHANGE_64; + + if (attrs->ia_valid & ATTR_GID) + args->gid = attrs->ia_gid; + else + args->gid = NO_CHANGE_64; + + if (attrs->ia_valid & ATTR_ATIME) + args->atime = cifs_UnixTimeToNT(attrs->ia_atime); + else + args->atime = NO_CHANGE_64; + + if (attrs->ia_valid & ATTR_MTIME) + args->mtime = cifs_UnixTimeToNT(attrs->ia_mtime); + else + args->mtime = NO_CHANGE_64; + + if (attrs->ia_valid & ATTR_CTIME) + args->ctime = cifs_UnixTimeToNT(attrs->ia_ctime); + else + args->ctime = NO_CHANGE_64; + + args->device = 0; + rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path, args, + cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); + + if (!rc) + rc = inode_setattr(inode, attrs); +out: + kfree(args); + kfree(full_path); + FreeXid(xid); + return rc; +} + int cifs_setattr(struct dentry *direntry, struct iattr *attrs) { int xid; - struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *pTcon; + struct inode *inode = direntry->d_inode; + struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); + struct cifsTconInfo *pTcon = cifs_sb->tcon; + struct cifsInodeInfo *cifsInode = CIFS_I(inode); char *full_path = NULL; int rc = -EACCES; FILE_BASIC_INFO time_buf; bool set_time = false; bool set_dosattr = false; __u64 mode = NO_CHANGE_64; - __u64 uid = NO_CHANGE_64; - __u64 gid = NO_CHANGE_64; - struct cifsInodeInfo *cifsInode; - struct inode *inode = direntry->d_inode; + + if (pTcon->unix_ext) + return cifs_setattr_unix(direntry, attrs); xid = GetXid(); cFYI(1, ("setattr on file %s attrs->iavalid 0x%x", direntry->d_name.name, attrs->ia_valid)); - cifs_sb = CIFS_SB(inode->i_sb); - pTcon = cifs_sb->tcon; - if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) { /* check if we have permission to change attrs */ rc = inode_change_ok(inode, attrs); @@ -1543,7 +1651,6 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) FreeXid(xid); return -ENOMEM; } - cifsInode = CIFS_I(inode); if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) { /* @@ -1574,19 +1681,8 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) * CIFSACL support + proper Windows to Unix idmapping, we may be * able to support this in the future. */ - if (!pTcon->unix_ext && - !(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) { + if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) attrs->ia_valid &= ~(ATTR_UID | ATTR_GID); - } else { - if (attrs->ia_valid & ATTR_UID) { - cFYI(1, ("UID changed to %d", attrs->ia_uid)); - uid = attrs->ia_uid; - } - if (attrs->ia_valid & ATTR_GID) { - cFYI(1, ("GID changed to %d", attrs->ia_gid)); - gid = attrs->ia_gid; - } - } time_buf.Attributes = 0; @@ -1599,22 +1695,7 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) mode = attrs->ia_mode; } - if ((pTcon->unix_ext) - && (attrs->ia_valid & (ATTR_MODE | ATTR_GID | ATTR_UID))) { - struct cifs_unix_set_info_args args = { - .mode = mode, - .uid = uid, - .gid = gid, - .ctime = NO_CHANGE_64, - .atime = NO_CHANGE_64, - .mtime = NO_CHANGE_64, - .device = 0, - }; - rc = CIFSSMBUnixSetInfo(xid, pTcon, full_path, &args, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); - } else if (attrs->ia_valid & ATTR_MODE) { + if (attrs->ia_valid & ATTR_MODE) { rc = 0; #ifdef CONFIG_CIFS_EXPERIMENTAL if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) -- GitLab From feb3e20cee25729447e1abdcb40c040b691d457a Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 2 Aug 2008 07:26:12 -0400 Subject: [PATCH 0913/1024] move file time and dos attribute setting logic into new function Break up cifs_setattr further by moving the logic that sets file times and dos attributes into a separate function. This patch also refactors the logic a bit so that when the file is already open then we go ahead and do a SetFileInfo call. SetPathInfo seems to be unreliable when setting times on open files. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/inode.c | 196 +++++++++++++++++++++++++++--------------------- 1 file changed, 109 insertions(+), 87 deletions(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index f68d1abe13e..5c722ea2113 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1504,6 +1504,101 @@ cifs_set_file_size(struct inode *inode, struct iattr *attrs, return rc; } +static int +cifs_set_file_info(struct inode *inode, struct iattr *attrs, int xid, + char *full_path, __u32 dosattr) +{ + int rc; + int oplock = 0; + __u16 netfid; + __u32 netpid; + bool set_time = false; + struct cifsFileInfo *open_file; + struct cifsInodeInfo *cifsInode = CIFS_I(inode); + struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); + struct cifsTconInfo *pTcon = cifs_sb->tcon; + FILE_BASIC_INFO info_buf; + + if (attrs->ia_valid & ATTR_ATIME) { + set_time = true; + info_buf.LastAccessTime = + cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_atime)); + } else + info_buf.LastAccessTime = 0; + + if (attrs->ia_valid & ATTR_MTIME) { + set_time = true; + info_buf.LastWriteTime = + cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_mtime)); + } else + info_buf.LastWriteTime = 0; + + /* + * Samba throws this field away, but windows may actually use it. + * Do not set ctime unless other time stamps are changed explicitly + * (i.e. by utimes()) since we would then have a mix of client and + * server times. + */ + if (set_time && (attrs->ia_valid & ATTR_CTIME)) { + cFYI(1, ("CIFS - CTIME changed")); + info_buf.ChangeTime = + cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_ctime)); + } else + info_buf.ChangeTime = 0; + + info_buf.CreationTime = 0; /* don't change */ + info_buf.Attributes = cpu_to_le32(dosattr); + + /* + * If the file is already open for write, just use that fileid + */ + open_file = find_writable_file(cifsInode); + if (open_file) { + netfid = open_file->netfid; + netpid = open_file->pid; + goto set_via_filehandle; + } + + /* + * NT4 apparently returns success on this call, but it doesn't + * really work. + */ + if (!(pTcon->ses->flags & CIFS_SES_NT4)) { + rc = CIFSSMBSetPathInfo(xid, pTcon, full_path, + &info_buf, cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); + if (rc != -EOPNOTSUPP && rc != -EINVAL) + goto out; + } + + cFYI(1, ("calling SetFileInfo since SetPathInfo for " + "times not supported by this server")); + rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, + SYNCHRONIZE | FILE_WRITE_ATTRIBUTES, + CREATE_NOT_DIR, &netfid, &oplock, + NULL, cifs_sb->local_nls, + cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_MAP_SPECIAL_CHR); + + if (rc != 0) { + if (rc == -EIO) + rc = -EINVAL; + goto out; + } + + netpid = current->tgid; + +set_via_filehandle: + rc = CIFSSMBSetFileInfo(xid, pTcon, &info_buf, netfid, netpid); + if (open_file == NULL) + CIFSSMBClose(xid, pTcon, netfid); + else + atomic_dec(&open_file->wrtPending); +out: + return rc; +} + static int cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs) { @@ -1623,9 +1718,7 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) struct cifsInodeInfo *cifsInode = CIFS_I(inode); char *full_path = NULL; int rc = -EACCES; - FILE_BASIC_INFO time_buf; - bool set_time = false; - bool set_dosattr = false; + __u32 dosattr = 0; __u64 mode = NO_CHANGE_64; if (pTcon->unix_ext) @@ -1684,8 +1777,6 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) attrs->ia_valid &= ~(ATTR_UID | ATTR_GID); - time_buf.Attributes = 0; - /* skip mode change if it's just for clearing setuid/setgid */ if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) attrs->ia_valid &= ~ATTR_MODE; @@ -1704,24 +1795,19 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) #endif if (((mode & S_IWUGO) == 0) && (cifsInode->cifsAttrs & ATTR_READONLY) == 0) { - set_dosattr = true; - time_buf.Attributes = cpu_to_le32(cifsInode->cifsAttrs | - ATTR_READONLY); + + dosattr = cifsInode->cifsAttrs | ATTR_READONLY; + /* fix up mode if we're not using dynperm */ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0) attrs->ia_mode = inode->i_mode & ~S_IWUGO; } else if ((mode & S_IWUGO) && (cifsInode->cifsAttrs & ATTR_READONLY)) { - /* If file is readonly on server, we would - not be able to write to it - so if any write - bit is enabled for user or group or other we - need to at least try to remove r/o dos attr */ - set_dosattr = true; - time_buf.Attributes = cpu_to_le32(cifsInode->cifsAttrs & - (~ATTR_READONLY)); - /* Windows ignores set to zero */ - if (time_buf.Attributes == 0) - time_buf.Attributes |= cpu_to_le32(ATTR_NORMAL); + + dosattr = cifsInode->cifsAttrs & ~ATTR_READONLY; + /* Attributes of 0 are ignored */ + if (dosattr == 0) + dosattr |= ATTR_NORMAL; /* reset local inode permissions to normal */ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)) { @@ -1739,82 +1825,18 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) } } - if (attrs->ia_valid & ATTR_ATIME) { - set_time = true; - time_buf.LastAccessTime = - cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_atime)); - } else - time_buf.LastAccessTime = 0; - - if (attrs->ia_valid & ATTR_MTIME) { - set_time = true; - time_buf.LastWriteTime = - cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_mtime)); - } else - time_buf.LastWriteTime = 0; - /* Do not set ctime explicitly unless other time - stamps are changed explicitly (i.e. by utime() - since we would then have a mix of client and - server times */ - - if (set_time && (attrs->ia_valid & ATTR_CTIME)) { - set_time = true; - /* Although Samba throws this field away - it may be useful to Windows - but we do - not want to set ctime unless some other - timestamp is changing */ - cFYI(1, ("CIFS - CTIME changed")); - time_buf.ChangeTime = - cpu_to_le64(cifs_UnixTimeToNT(attrs->ia_ctime)); - } else - time_buf.ChangeTime = 0; - - if (set_time || set_dosattr) { - time_buf.CreationTime = 0; /* do not change */ - /* In the future we should experiment - try setting timestamps - via Handle (SetFileInfo) instead of by path */ - if (!(pTcon->ses->flags & CIFS_SES_NT4)) - rc = CIFSSMBSetPathInfo(xid, pTcon, full_path, - &time_buf, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); - else - rc = -EOPNOTSUPP; - - if (rc == -EOPNOTSUPP) { - int oplock = 0; - __u16 netfid; + if (attrs->ia_valid & (ATTR_MTIME|ATTR_ATIME|ATTR_CTIME) || + ((attrs->ia_valid & ATTR_MODE) && dosattr)) { + rc = cifs_set_file_info(inode, attrs, xid, full_path, dosattr); + /* BB: check for rc = -EOPNOTSUPP and switch to legacy mode */ - cFYI(1, ("calling SetFileInfo since SetPathInfo for " - "times not supported by this server")); - /* BB we could scan to see if we already have it open - and pass in pid of opener to function */ - rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, - SYNCHRONIZE | FILE_WRITE_ATTRIBUTES, - CREATE_NOT_DIR, &netfid, &oplock, - NULL, cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); - if (rc == 0) { - rc = CIFSSMBSetFileInfo(xid, pTcon, &time_buf, - netfid, current->tgid); - CIFSSMBClose(xid, pTcon, netfid); - } else { - /* BB For even older servers we could convert time_buf - into old DOS style which uses two second - granularity */ - - /* rc = CIFSSMBSetTimesLegacy(xid, pTcon, full_path, - &time_buf, cifs_sb->local_nls); */ - } - } /* Even if error on time set, no sense failing the call if the server would set the time to a reasonable value anyway, and this check ensures that we are not being called from sys_utimes in which case we ought to fail the call back to the user when the server rejects the call */ if ((rc) && (attrs->ia_valid & - (ATTR_MODE | ATTR_GID | ATTR_UID | ATTR_SIZE))) + (ATTR_MODE | ATTR_GID | ATTR_UID | ATTR_SIZE))) rc = 0; } -- GitLab From 0510eeb7367aca017c6320d04cfd9cbc3b5dd992 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sat, 2 Aug 2008 07:26:12 -0400 Subject: [PATCH 0914/1024] turn cifs_setattr into a multiplexor that calls the correct function Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/inode.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 5c722ea2113..28a22092d45 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1709,21 +1709,18 @@ out: return rc; } -int cifs_setattr(struct dentry *direntry, struct iattr *attrs) +static int +cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs) { int xid; struct inode *inode = direntry->d_inode; struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); - struct cifsTconInfo *pTcon = cifs_sb->tcon; struct cifsInodeInfo *cifsInode = CIFS_I(inode); char *full_path = NULL; int rc = -EACCES; __u32 dosattr = 0; __u64 mode = NO_CHANGE_64; - if (pTcon->unix_ext) - return cifs_setattr_unix(direntry, attrs); - xid = GetXid(); cFYI(1, ("setattr on file %s attrs->iavalid 0x%x", @@ -1850,6 +1847,21 @@ cifs_setattr_exit: return rc; } +int +cifs_setattr(struct dentry *direntry, struct iattr *attrs) +{ + struct inode *inode = direntry->d_inode; + struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); + struct cifsTconInfo *pTcon = cifs_sb->tcon; + + if (pTcon->unix_ext) + return cifs_setattr_unix(direntry, attrs); + + return cifs_setattr_nounix(direntry, attrs); + + /* BB: add cifs_setattr_legacy for really old servers */ +} + #if 0 void cifs_delete_inode(struct inode *inode) { -- GitLab From f99e8f277f1172c49ac7b0585aed5b094fe235d4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 6 Aug 2008 17:36:23 -0700 Subject: [PATCH 0915/1024] iSeries: Fix up viotty_ioctl BKL locking fallout The bogus code to call into the n_tty layer got removed in commit 8bc5fb6abb670fa9079cd1994f016a39f99698fe ("Remove bogons from the iSeries console"), but it left a now uninitialized "return ret;" around. Not that this code has ever even compiled since the BKL pushdown, since not only is "ret" no longer initialized, it was never actually declared even originally. Replace it with a "return -ENOIOCTLCMD" Pointed-out-by: Paul Mackerras Acked-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/viocons.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c index f48892ba12f..7feeb774a10 100644 --- a/drivers/char/viocons.c +++ b/drivers/char/viocons.c @@ -705,7 +705,7 @@ static int viotty_ioctl(struct tty_struct *tty, struct file *file, case KDSKBLED: return 0; } - return ret; + return -ENOIOCTLCMD; } /* -- GitLab From f8d91faff3bb82c7026d6a2a5c97ee7d88bc0229 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 6 Aug 2008 18:14:28 -0700 Subject: [PATCH 0916/1024] of/sparc: remove include of linux/of_platform.h from asm/of_platform.h Now that we have removed all inclusions of asm/of_platform.h, this compatability include can be removed. Signed-off-by: Stephen Rothwell Signed-off-by: David S. Miller --- arch/sparc/include/asm/of_platform.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h index 93a262c4402..2348ab90a57 100644 --- a/arch/sparc/include/asm/of_platform.h +++ b/arch/sparc/include/asm/of_platform.h @@ -13,9 +13,6 @@ * */ -/* This is just here during the transition */ -#include - extern struct bus_type ebus_bus_type; extern struct bus_type sbus_bus_type; -- GitLab From 11d46123bfea068a48483f00518d301f452647fb Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 6 Aug 2008 18:30:43 -0700 Subject: [PATCH 0917/1024] ipv4: Fix over-ifdeffing of ip_static_sysctl_init. Noticed by Paulius Zaleckas. Signed-off-by: David S. Miller --- net/ipv4/route.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index eccb61889df..16fc6f454a3 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -3223,9 +3223,7 @@ int __init ip_rt_init(void) */ void __init ip_static_sysctl_init(void) { -#ifdef CONFIG_SYSCTL register_sysctl_paths(ipv4_route_path, ipv4_route_table); -#endif } #endif -- GitLab From 685d87f7ccc649ab92b55e18e507a65d0e694eb9 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 6 Aug 2008 19:24:47 -0700 Subject: [PATCH 0918/1024] Revert "pcm_native.c: remove unused label" This reverts commit 680db0136e0778a0d7e025af7572c6a8d82279e2. The label is actually used, but hidden behind CONFIG_SND_DEBUG and the horrible snd_assert() macro. That macro could probably be improved to be along the lines of #define snd_assert(expr, args...) do { if ((void)(expr),0) { args; } } while (0) or similar to make sure that we always both evaluate 'expr' and parse 'args', but while gcc should optimize it all away, I'm too lazy to really verify that. So I'll just admit defeat and will continue to live with the annoying warning. Noted-by: Robert P. J. Day Signed-off-by: Linus "Grr.." Torvalds --- sound/core/pcm_native.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 333cff68c15..c49b9d9e303 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -3259,6 +3259,7 @@ static int snd_pcm_fasync(int fd, struct file * file, int on) runtime = substream->runtime; err = fasync_helper(fd, file, on, &runtime->fasync); +out: unlock_kernel(); if (err < 0) return err; -- GitLab From f780a9f119caa48088b230836a7fa73d1096de7c Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Wed, 6 Aug 2008 20:14:06 -0700 Subject: [PATCH 0919/1024] mlx4_core: Add ethernet fields to CQE struct Add ethernet-related fields to struct mlx4_cqe so that the mlx4_en ethernet NIC driver can share the same definition. Signed-off-by: Yevgeny Petrilin Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/cq.c | 33 +++++++++++++++--------------- include/linux/mlx4/cq.h | 36 ++++++++++++++++++++++----------- 2 files changed, 40 insertions(+), 29 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c index a1464574bfd..d0866a3636e 100644 --- a/drivers/infiniband/hw/mlx4/cq.c +++ b/drivers/infiniband/hw/mlx4/cq.c @@ -515,17 +515,17 @@ static void mlx4_ib_handle_error_cqe(struct mlx4_err_cqe *cqe, wc->vendor_err = cqe->vendor_err_syndrome; } -static int mlx4_ib_ipoib_csum_ok(__be32 status, __be16 checksum) +static int mlx4_ib_ipoib_csum_ok(__be16 status, __be16 checksum) { - return ((status & cpu_to_be32(MLX4_CQE_IPOIB_STATUS_IPV4 | - MLX4_CQE_IPOIB_STATUS_IPV4F | - MLX4_CQE_IPOIB_STATUS_IPV4OPT | - MLX4_CQE_IPOIB_STATUS_IPV6 | - MLX4_CQE_IPOIB_STATUS_IPOK)) == - cpu_to_be32(MLX4_CQE_IPOIB_STATUS_IPV4 | - MLX4_CQE_IPOIB_STATUS_IPOK)) && - (status & cpu_to_be32(MLX4_CQE_IPOIB_STATUS_UDP | - MLX4_CQE_IPOIB_STATUS_TCP)) && + return ((status & cpu_to_be16(MLX4_CQE_STATUS_IPV4 | + MLX4_CQE_STATUS_IPV4F | + MLX4_CQE_STATUS_IPV4OPT | + MLX4_CQE_STATUS_IPV6 | + MLX4_CQE_STATUS_IPOK)) == + cpu_to_be16(MLX4_CQE_STATUS_IPV4 | + MLX4_CQE_STATUS_IPOK)) && + (status & cpu_to_be16(MLX4_CQE_STATUS_UDP | + MLX4_CQE_STATUS_TCP)) && checksum == cpu_to_be16(0xffff); } @@ -582,17 +582,17 @@ repoll: } if (!*cur_qp || - (be32_to_cpu(cqe->my_qpn) & 0xffffff) != (*cur_qp)->mqp.qpn) { + (be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK) != (*cur_qp)->mqp.qpn) { /* * We do not have to take the QP table lock here, * because CQs will be locked while QPs are removed * from the table. */ mqp = __mlx4_qp_lookup(to_mdev(cq->ibcq.device)->dev, - be32_to_cpu(cqe->my_qpn)); + be32_to_cpu(cqe->vlan_my_qpn)); if (unlikely(!mqp)) { printk(KERN_WARNING "CQ %06x with entry for unknown QPN %06x\n", - cq->mcq.cqn, be32_to_cpu(cqe->my_qpn) & 0xffffff); + cq->mcq.cqn, be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK); return -EINVAL; } @@ -692,14 +692,13 @@ repoll: } wc->slid = be16_to_cpu(cqe->rlid); - wc->sl = cqe->sl >> 4; + wc->sl = be16_to_cpu(cqe->sl_vid >> 12); g_mlpath_rqpn = be32_to_cpu(cqe->g_mlpath_rqpn); wc->src_qp = g_mlpath_rqpn & 0xffffff; wc->dlid_path_bits = (g_mlpath_rqpn >> 24) & 0x7f; wc->wc_flags |= g_mlpath_rqpn & 0x80000000 ? IB_WC_GRH : 0; wc->pkey_index = be32_to_cpu(cqe->immed_rss_invalid) & 0x7f; - wc->csum_ok = mlx4_ib_ipoib_csum_ok(cqe->ipoib_status, - cqe->checksum); + wc->csum_ok = mlx4_ib_ipoib_csum_ok(cqe->status, cqe->checksum); } return 0; @@ -767,7 +766,7 @@ void __mlx4_ib_cq_clean(struct mlx4_ib_cq *cq, u32 qpn, struct mlx4_ib_srq *srq) */ while ((int) --prod_index - (int) cq->mcq.cons_index >= 0) { cqe = get_cqe(cq, prod_index & cq->ibcq.cqe); - if ((be32_to_cpu(cqe->my_qpn) & 0xffffff) == qpn) { + if ((be32_to_cpu(cqe->vlan_my_qpn) & MLX4_CQE_QPN_MASK) == qpn) { if (srq && !(cqe->owner_sr_opcode & MLX4_CQE_IS_SEND_MASK)) mlx4_ib_free_srq_wqe(srq, be16_to_cpu(cqe->wqe_index)); ++nfreed; diff --git a/include/linux/mlx4/cq.h b/include/linux/mlx4/cq.h index 071cf96cf01..6f65b2c8bb8 100644 --- a/include/linux/mlx4/cq.h +++ b/include/linux/mlx4/cq.h @@ -39,17 +39,18 @@ #include struct mlx4_cqe { - __be32 my_qpn; + __be32 vlan_my_qpn; __be32 immed_rss_invalid; __be32 g_mlpath_rqpn; - u8 sl; - u8 reserved1; + __be16 sl_vid; __be16 rlid; - __be32 ipoib_status; + __be16 status; + u8 ipv6_ext_mask; + u8 badfcs_enc; __be32 byte_cnt; __be16 wqe_index; __be16 checksum; - u8 reserved2[3]; + u8 reserved[3]; u8 owner_sr_opcode; }; @@ -63,6 +64,11 @@ struct mlx4_err_cqe { u8 owner_sr_opcode; }; +enum { + MLX4_CQE_VLAN_PRESENT_MASK = 1 << 29, + MLX4_CQE_QPN_MASK = 0xffffff, +}; + enum { MLX4_CQE_OWNER_MASK = 0x80, MLX4_CQE_IS_SEND_MASK = 0x40, @@ -86,13 +92,19 @@ enum { }; enum { - MLX4_CQE_IPOIB_STATUS_IPV4 = 1 << 22, - MLX4_CQE_IPOIB_STATUS_IPV4F = 1 << 23, - MLX4_CQE_IPOIB_STATUS_IPV6 = 1 << 24, - MLX4_CQE_IPOIB_STATUS_IPV4OPT = 1 << 25, - MLX4_CQE_IPOIB_STATUS_TCP = 1 << 26, - MLX4_CQE_IPOIB_STATUS_UDP = 1 << 27, - MLX4_CQE_IPOIB_STATUS_IPOK = 1 << 28, + MLX4_CQE_STATUS_IPV4 = 1 << 6, + MLX4_CQE_STATUS_IPV4F = 1 << 7, + MLX4_CQE_STATUS_IPV6 = 1 << 8, + MLX4_CQE_STATUS_IPV4OPT = 1 << 9, + MLX4_CQE_STATUS_TCP = 1 << 10, + MLX4_CQE_STATUS_UDP = 1 << 11, + MLX4_CQE_STATUS_IPOK = 1 << 12, +}; + +enum { + MLX4_CQE_LLC = 1, + MLX4_CQE_SNAP = 1 << 1, + MLX4_CQE_BAD_FCS = 1 << 4, }; static inline void mlx4_cq_arm(struct mlx4_cq *cq, u32 cmd, -- GitLab From 58750139001bae11a1f9b074f3a9c774fecf5ba8 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 31 Jul 2008 14:38:07 +1000 Subject: [PATCH 0920/1024] Move all of include/asm-m68knommu to arch/m68knommu/include/asm. With the current kbuild infrastructure in place no other changes are required for this to work. Signed-off-by: Greg Ungerer --- {include/asm-m68knommu => arch/m68knommu/include/asm}/Kbuild | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/MC68328.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/MC68332.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/MC68EZ328.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/MC68VZ328.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/a.out.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/anchor.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/atomic.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/auxvec.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/bitops.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/bootinfo.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/bootstd.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/bug.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/bugs.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/byteorder.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/cache.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/cachectl.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/cacheflush.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/checksum.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/coldfire.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/commproc.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/cputime.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/current.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/dbg.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/delay.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/device.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/div64.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/dma-mapping.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/dma.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/elf.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/elia.h | 0 .../m68knommu/include/asm}/emergency-restart.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/entry.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/errno.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/fb.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/fcntl.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/flat.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/fpu.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/futex.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/hardirq.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/hw_irq.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/hwtest.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/io.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/ioctl.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/ioctls.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/ipcbuf.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/irq.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/irq_regs.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/kdebug.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/kmap_types.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/linkage.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/local.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/m5206sim.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/m520xsim.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/m523xsim.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/m5249sim.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/m5272sim.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/m527xsim.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/m528xsim.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/m5307sim.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/m532xsim.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/m5407sim.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/m68360.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/m68360_enet.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/m68360_pram.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/m68360_quicc.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/m68360_regs.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/machdep.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/math-emu.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/mc146818rtc.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfcache.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfdma.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfmbus.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfne.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfpci.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfpit.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfsim.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfsmc.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/mcftimer.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfuart.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfwdebug.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/md.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/mman.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/mmu.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/mmu_context.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/module.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/movs.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/msgbuf.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/mutex.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/nettel.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/openprom.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/oplib.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/page.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/page_offset.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/param.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/pci.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/percpu.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/pgalloc.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/pgtable.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/poll.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/posix_types.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/processor.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/ptrace.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/quicc_simple.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/resource.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/rtc.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/scatterlist.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/sections.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/segment.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/sembuf.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/setup.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/shm.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/shmbuf.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/shmparam.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/sigcontext.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/siginfo.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/signal.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/smp.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/socket.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/sockios.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/spinlock.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/stat.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/statfs.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/string.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/system.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/termbits.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/termios.h | 0 .../asm-m68knommu => arch/m68knommu/include/asm}/thread_info.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/timex.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/tlb.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/tlbflush.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/topology.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/traps.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/types.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/uaccess.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/ucontext.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/unaligned.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/unistd.h | 0 {include/asm-m68knommu => arch/m68knommu/include/asm}/user.h | 0 139 files changed, 0 insertions(+), 0 deletions(-) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/Kbuild (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/MC68328.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/MC68332.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/MC68EZ328.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/MC68VZ328.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/a.out.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/anchor.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/atomic.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/auxvec.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/bitops.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/bootinfo.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/bootstd.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/bug.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/bugs.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/byteorder.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/cache.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/cachectl.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/cacheflush.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/checksum.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/coldfire.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/commproc.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/cputime.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/current.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/dbg.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/delay.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/device.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/div64.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/dma-mapping.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/dma.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/elf.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/elia.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/emergency-restart.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/entry.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/errno.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/fb.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/fcntl.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/flat.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/fpu.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/futex.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/hardirq.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/hw_irq.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/hwtest.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/io.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/ioctl.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/ioctls.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/ipcbuf.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/irq.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/irq_regs.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/kdebug.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/kmap_types.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/linkage.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/local.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m5206sim.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m520xsim.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m523xsim.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m5249sim.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m5272sim.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m527xsim.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m528xsim.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m5307sim.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m532xsim.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m5407sim.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m68360.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m68360_enet.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m68360_pram.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m68360_quicc.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/m68360_regs.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/machdep.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/math-emu.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mc146818rtc.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfcache.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfdma.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfmbus.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfne.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfpci.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfpit.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfsim.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfsmc.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mcftimer.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfuart.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mcfwdebug.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/md.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mman.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mmu.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mmu_context.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/module.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/movs.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/msgbuf.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/mutex.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/nettel.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/openprom.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/oplib.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/page.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/page_offset.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/param.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/pci.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/percpu.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/pgalloc.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/pgtable.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/poll.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/posix_types.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/processor.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/ptrace.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/quicc_simple.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/resource.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/rtc.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/scatterlist.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/sections.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/segment.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/sembuf.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/setup.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/shm.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/shmbuf.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/shmparam.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/sigcontext.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/siginfo.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/signal.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/smp.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/socket.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/sockios.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/spinlock.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/stat.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/statfs.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/string.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/system.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/termbits.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/termios.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/thread_info.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/timex.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/tlb.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/tlbflush.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/topology.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/traps.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/types.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/uaccess.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/ucontext.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/unaligned.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/unistd.h (100%) rename {include/asm-m68knommu => arch/m68knommu/include/asm}/user.h (100%) diff --git a/include/asm-m68knommu/Kbuild b/arch/m68knommu/include/asm/Kbuild similarity index 100% rename from include/asm-m68knommu/Kbuild rename to arch/m68knommu/include/asm/Kbuild diff --git a/include/asm-m68knommu/MC68328.h b/arch/m68knommu/include/asm/MC68328.h similarity index 100% rename from include/asm-m68knommu/MC68328.h rename to arch/m68knommu/include/asm/MC68328.h diff --git a/include/asm-m68knommu/MC68332.h b/arch/m68knommu/include/asm/MC68332.h similarity index 100% rename from include/asm-m68knommu/MC68332.h rename to arch/m68knommu/include/asm/MC68332.h diff --git a/include/asm-m68knommu/MC68EZ328.h b/arch/m68knommu/include/asm/MC68EZ328.h similarity index 100% rename from include/asm-m68knommu/MC68EZ328.h rename to arch/m68knommu/include/asm/MC68EZ328.h diff --git a/include/asm-m68knommu/MC68VZ328.h b/arch/m68knommu/include/asm/MC68VZ328.h similarity index 100% rename from include/asm-m68knommu/MC68VZ328.h rename to arch/m68knommu/include/asm/MC68VZ328.h diff --git a/include/asm-m68knommu/a.out.h b/arch/m68knommu/include/asm/a.out.h similarity index 100% rename from include/asm-m68knommu/a.out.h rename to arch/m68knommu/include/asm/a.out.h diff --git a/include/asm-m68knommu/anchor.h b/arch/m68knommu/include/asm/anchor.h similarity index 100% rename from include/asm-m68knommu/anchor.h rename to arch/m68knommu/include/asm/anchor.h diff --git a/include/asm-m68knommu/atomic.h b/arch/m68knommu/include/asm/atomic.h similarity index 100% rename from include/asm-m68knommu/atomic.h rename to arch/m68knommu/include/asm/atomic.h diff --git a/include/asm-m68knommu/auxvec.h b/arch/m68knommu/include/asm/auxvec.h similarity index 100% rename from include/asm-m68knommu/auxvec.h rename to arch/m68knommu/include/asm/auxvec.h diff --git a/include/asm-m68knommu/bitops.h b/arch/m68knommu/include/asm/bitops.h similarity index 100% rename from include/asm-m68knommu/bitops.h rename to arch/m68knommu/include/asm/bitops.h diff --git a/include/asm-m68knommu/bootinfo.h b/arch/m68knommu/include/asm/bootinfo.h similarity index 100% rename from include/asm-m68knommu/bootinfo.h rename to arch/m68knommu/include/asm/bootinfo.h diff --git a/include/asm-m68knommu/bootstd.h b/arch/m68knommu/include/asm/bootstd.h similarity index 100% rename from include/asm-m68knommu/bootstd.h rename to arch/m68knommu/include/asm/bootstd.h diff --git a/include/asm-m68knommu/bug.h b/arch/m68knommu/include/asm/bug.h similarity index 100% rename from include/asm-m68knommu/bug.h rename to arch/m68knommu/include/asm/bug.h diff --git a/include/asm-m68knommu/bugs.h b/arch/m68knommu/include/asm/bugs.h similarity index 100% rename from include/asm-m68knommu/bugs.h rename to arch/m68knommu/include/asm/bugs.h diff --git a/include/asm-m68knommu/byteorder.h b/arch/m68knommu/include/asm/byteorder.h similarity index 100% rename from include/asm-m68knommu/byteorder.h rename to arch/m68knommu/include/asm/byteorder.h diff --git a/include/asm-m68knommu/cache.h b/arch/m68knommu/include/asm/cache.h similarity index 100% rename from include/asm-m68knommu/cache.h rename to arch/m68knommu/include/asm/cache.h diff --git a/include/asm-m68knommu/cachectl.h b/arch/m68knommu/include/asm/cachectl.h similarity index 100% rename from include/asm-m68knommu/cachectl.h rename to arch/m68knommu/include/asm/cachectl.h diff --git a/include/asm-m68knommu/cacheflush.h b/arch/m68knommu/include/asm/cacheflush.h similarity index 100% rename from include/asm-m68knommu/cacheflush.h rename to arch/m68knommu/include/asm/cacheflush.h diff --git a/include/asm-m68knommu/checksum.h b/arch/m68knommu/include/asm/checksum.h similarity index 100% rename from include/asm-m68knommu/checksum.h rename to arch/m68knommu/include/asm/checksum.h diff --git a/include/asm-m68knommu/coldfire.h b/arch/m68knommu/include/asm/coldfire.h similarity index 100% rename from include/asm-m68knommu/coldfire.h rename to arch/m68knommu/include/asm/coldfire.h diff --git a/include/asm-m68knommu/commproc.h b/arch/m68knommu/include/asm/commproc.h similarity index 100% rename from include/asm-m68knommu/commproc.h rename to arch/m68knommu/include/asm/commproc.h diff --git a/include/asm-m68knommu/cputime.h b/arch/m68knommu/include/asm/cputime.h similarity index 100% rename from include/asm-m68knommu/cputime.h rename to arch/m68knommu/include/asm/cputime.h diff --git a/include/asm-m68knommu/current.h b/arch/m68knommu/include/asm/current.h similarity index 100% rename from include/asm-m68knommu/current.h rename to arch/m68knommu/include/asm/current.h diff --git a/include/asm-m68knommu/dbg.h b/arch/m68knommu/include/asm/dbg.h similarity index 100% rename from include/asm-m68knommu/dbg.h rename to arch/m68knommu/include/asm/dbg.h diff --git a/include/asm-m68knommu/delay.h b/arch/m68knommu/include/asm/delay.h similarity index 100% rename from include/asm-m68knommu/delay.h rename to arch/m68knommu/include/asm/delay.h diff --git a/include/asm-m68knommu/device.h b/arch/m68knommu/include/asm/device.h similarity index 100% rename from include/asm-m68knommu/device.h rename to arch/m68knommu/include/asm/device.h diff --git a/include/asm-m68knommu/div64.h b/arch/m68knommu/include/asm/div64.h similarity index 100% rename from include/asm-m68knommu/div64.h rename to arch/m68knommu/include/asm/div64.h diff --git a/include/asm-m68knommu/dma-mapping.h b/arch/m68knommu/include/asm/dma-mapping.h similarity index 100% rename from include/asm-m68knommu/dma-mapping.h rename to arch/m68knommu/include/asm/dma-mapping.h diff --git a/include/asm-m68knommu/dma.h b/arch/m68knommu/include/asm/dma.h similarity index 100% rename from include/asm-m68knommu/dma.h rename to arch/m68knommu/include/asm/dma.h diff --git a/include/asm-m68knommu/elf.h b/arch/m68knommu/include/asm/elf.h similarity index 100% rename from include/asm-m68knommu/elf.h rename to arch/m68knommu/include/asm/elf.h diff --git a/include/asm-m68knommu/elia.h b/arch/m68knommu/include/asm/elia.h similarity index 100% rename from include/asm-m68knommu/elia.h rename to arch/m68knommu/include/asm/elia.h diff --git a/include/asm-m68knommu/emergency-restart.h b/arch/m68knommu/include/asm/emergency-restart.h similarity index 100% rename from include/asm-m68knommu/emergency-restart.h rename to arch/m68knommu/include/asm/emergency-restart.h diff --git a/include/asm-m68knommu/entry.h b/arch/m68knommu/include/asm/entry.h similarity index 100% rename from include/asm-m68knommu/entry.h rename to arch/m68knommu/include/asm/entry.h diff --git a/include/asm-m68knommu/errno.h b/arch/m68knommu/include/asm/errno.h similarity index 100% rename from include/asm-m68knommu/errno.h rename to arch/m68knommu/include/asm/errno.h diff --git a/include/asm-m68knommu/fb.h b/arch/m68knommu/include/asm/fb.h similarity index 100% rename from include/asm-m68knommu/fb.h rename to arch/m68knommu/include/asm/fb.h diff --git a/include/asm-m68knommu/fcntl.h b/arch/m68knommu/include/asm/fcntl.h similarity index 100% rename from include/asm-m68knommu/fcntl.h rename to arch/m68knommu/include/asm/fcntl.h diff --git a/include/asm-m68knommu/flat.h b/arch/m68knommu/include/asm/flat.h similarity index 100% rename from include/asm-m68knommu/flat.h rename to arch/m68knommu/include/asm/flat.h diff --git a/include/asm-m68knommu/fpu.h b/arch/m68knommu/include/asm/fpu.h similarity index 100% rename from include/asm-m68knommu/fpu.h rename to arch/m68knommu/include/asm/fpu.h diff --git a/include/asm-m68knommu/futex.h b/arch/m68knommu/include/asm/futex.h similarity index 100% rename from include/asm-m68knommu/futex.h rename to arch/m68knommu/include/asm/futex.h diff --git a/include/asm-m68knommu/hardirq.h b/arch/m68knommu/include/asm/hardirq.h similarity index 100% rename from include/asm-m68knommu/hardirq.h rename to arch/m68knommu/include/asm/hardirq.h diff --git a/include/asm-m68knommu/hw_irq.h b/arch/m68knommu/include/asm/hw_irq.h similarity index 100% rename from include/asm-m68knommu/hw_irq.h rename to arch/m68knommu/include/asm/hw_irq.h diff --git a/include/asm-m68knommu/hwtest.h b/arch/m68knommu/include/asm/hwtest.h similarity index 100% rename from include/asm-m68knommu/hwtest.h rename to arch/m68knommu/include/asm/hwtest.h diff --git a/include/asm-m68knommu/io.h b/arch/m68knommu/include/asm/io.h similarity index 100% rename from include/asm-m68knommu/io.h rename to arch/m68knommu/include/asm/io.h diff --git a/include/asm-m68knommu/ioctl.h b/arch/m68knommu/include/asm/ioctl.h similarity index 100% rename from include/asm-m68knommu/ioctl.h rename to arch/m68knommu/include/asm/ioctl.h diff --git a/include/asm-m68knommu/ioctls.h b/arch/m68knommu/include/asm/ioctls.h similarity index 100% rename from include/asm-m68knommu/ioctls.h rename to arch/m68knommu/include/asm/ioctls.h diff --git a/include/asm-m68knommu/ipcbuf.h b/arch/m68knommu/include/asm/ipcbuf.h similarity index 100% rename from include/asm-m68knommu/ipcbuf.h rename to arch/m68knommu/include/asm/ipcbuf.h diff --git a/include/asm-m68knommu/irq.h b/arch/m68knommu/include/asm/irq.h similarity index 100% rename from include/asm-m68knommu/irq.h rename to arch/m68knommu/include/asm/irq.h diff --git a/include/asm-m68knommu/irq_regs.h b/arch/m68knommu/include/asm/irq_regs.h similarity index 100% rename from include/asm-m68knommu/irq_regs.h rename to arch/m68knommu/include/asm/irq_regs.h diff --git a/include/asm-m68knommu/kdebug.h b/arch/m68knommu/include/asm/kdebug.h similarity index 100% rename from include/asm-m68knommu/kdebug.h rename to arch/m68knommu/include/asm/kdebug.h diff --git a/include/asm-m68knommu/kmap_types.h b/arch/m68knommu/include/asm/kmap_types.h similarity index 100% rename from include/asm-m68knommu/kmap_types.h rename to arch/m68knommu/include/asm/kmap_types.h diff --git a/include/asm-m68knommu/linkage.h b/arch/m68knommu/include/asm/linkage.h similarity index 100% rename from include/asm-m68knommu/linkage.h rename to arch/m68knommu/include/asm/linkage.h diff --git a/include/asm-m68knommu/local.h b/arch/m68knommu/include/asm/local.h similarity index 100% rename from include/asm-m68knommu/local.h rename to arch/m68knommu/include/asm/local.h diff --git a/include/asm-m68knommu/m5206sim.h b/arch/m68knommu/include/asm/m5206sim.h similarity index 100% rename from include/asm-m68knommu/m5206sim.h rename to arch/m68knommu/include/asm/m5206sim.h diff --git a/include/asm-m68knommu/m520xsim.h b/arch/m68knommu/include/asm/m520xsim.h similarity index 100% rename from include/asm-m68knommu/m520xsim.h rename to arch/m68knommu/include/asm/m520xsim.h diff --git a/include/asm-m68knommu/m523xsim.h b/arch/m68knommu/include/asm/m523xsim.h similarity index 100% rename from include/asm-m68knommu/m523xsim.h rename to arch/m68knommu/include/asm/m523xsim.h diff --git a/include/asm-m68knommu/m5249sim.h b/arch/m68knommu/include/asm/m5249sim.h similarity index 100% rename from include/asm-m68knommu/m5249sim.h rename to arch/m68knommu/include/asm/m5249sim.h diff --git a/include/asm-m68knommu/m5272sim.h b/arch/m68knommu/include/asm/m5272sim.h similarity index 100% rename from include/asm-m68knommu/m5272sim.h rename to arch/m68knommu/include/asm/m5272sim.h diff --git a/include/asm-m68knommu/m527xsim.h b/arch/m68knommu/include/asm/m527xsim.h similarity index 100% rename from include/asm-m68knommu/m527xsim.h rename to arch/m68knommu/include/asm/m527xsim.h diff --git a/include/asm-m68knommu/m528xsim.h b/arch/m68knommu/include/asm/m528xsim.h similarity index 100% rename from include/asm-m68knommu/m528xsim.h rename to arch/m68knommu/include/asm/m528xsim.h diff --git a/include/asm-m68knommu/m5307sim.h b/arch/m68knommu/include/asm/m5307sim.h similarity index 100% rename from include/asm-m68knommu/m5307sim.h rename to arch/m68knommu/include/asm/m5307sim.h diff --git a/include/asm-m68knommu/m532xsim.h b/arch/m68knommu/include/asm/m532xsim.h similarity index 100% rename from include/asm-m68knommu/m532xsim.h rename to arch/m68knommu/include/asm/m532xsim.h diff --git a/include/asm-m68knommu/m5407sim.h b/arch/m68knommu/include/asm/m5407sim.h similarity index 100% rename from include/asm-m68knommu/m5407sim.h rename to arch/m68knommu/include/asm/m5407sim.h diff --git a/include/asm-m68knommu/m68360.h b/arch/m68knommu/include/asm/m68360.h similarity index 100% rename from include/asm-m68knommu/m68360.h rename to arch/m68knommu/include/asm/m68360.h diff --git a/include/asm-m68knommu/m68360_enet.h b/arch/m68knommu/include/asm/m68360_enet.h similarity index 100% rename from include/asm-m68knommu/m68360_enet.h rename to arch/m68knommu/include/asm/m68360_enet.h diff --git a/include/asm-m68knommu/m68360_pram.h b/arch/m68knommu/include/asm/m68360_pram.h similarity index 100% rename from include/asm-m68knommu/m68360_pram.h rename to arch/m68knommu/include/asm/m68360_pram.h diff --git a/include/asm-m68knommu/m68360_quicc.h b/arch/m68knommu/include/asm/m68360_quicc.h similarity index 100% rename from include/asm-m68knommu/m68360_quicc.h rename to arch/m68knommu/include/asm/m68360_quicc.h diff --git a/include/asm-m68knommu/m68360_regs.h b/arch/m68knommu/include/asm/m68360_regs.h similarity index 100% rename from include/asm-m68knommu/m68360_regs.h rename to arch/m68knommu/include/asm/m68360_regs.h diff --git a/include/asm-m68knommu/machdep.h b/arch/m68knommu/include/asm/machdep.h similarity index 100% rename from include/asm-m68knommu/machdep.h rename to arch/m68knommu/include/asm/machdep.h diff --git a/include/asm-m68knommu/math-emu.h b/arch/m68knommu/include/asm/math-emu.h similarity index 100% rename from include/asm-m68knommu/math-emu.h rename to arch/m68knommu/include/asm/math-emu.h diff --git a/include/asm-m68knommu/mc146818rtc.h b/arch/m68knommu/include/asm/mc146818rtc.h similarity index 100% rename from include/asm-m68knommu/mc146818rtc.h rename to arch/m68knommu/include/asm/mc146818rtc.h diff --git a/include/asm-m68knommu/mcfcache.h b/arch/m68knommu/include/asm/mcfcache.h similarity index 100% rename from include/asm-m68knommu/mcfcache.h rename to arch/m68knommu/include/asm/mcfcache.h diff --git a/include/asm-m68knommu/mcfdma.h b/arch/m68knommu/include/asm/mcfdma.h similarity index 100% rename from include/asm-m68knommu/mcfdma.h rename to arch/m68knommu/include/asm/mcfdma.h diff --git a/include/asm-m68knommu/mcfmbus.h b/arch/m68knommu/include/asm/mcfmbus.h similarity index 100% rename from include/asm-m68knommu/mcfmbus.h rename to arch/m68knommu/include/asm/mcfmbus.h diff --git a/include/asm-m68knommu/mcfne.h b/arch/m68knommu/include/asm/mcfne.h similarity index 100% rename from include/asm-m68knommu/mcfne.h rename to arch/m68knommu/include/asm/mcfne.h diff --git a/include/asm-m68knommu/mcfpci.h b/arch/m68knommu/include/asm/mcfpci.h similarity index 100% rename from include/asm-m68knommu/mcfpci.h rename to arch/m68knommu/include/asm/mcfpci.h diff --git a/include/asm-m68knommu/mcfpit.h b/arch/m68knommu/include/asm/mcfpit.h similarity index 100% rename from include/asm-m68knommu/mcfpit.h rename to arch/m68knommu/include/asm/mcfpit.h diff --git a/include/asm-m68knommu/mcfsim.h b/arch/m68knommu/include/asm/mcfsim.h similarity index 100% rename from include/asm-m68knommu/mcfsim.h rename to arch/m68knommu/include/asm/mcfsim.h diff --git a/include/asm-m68knommu/mcfsmc.h b/arch/m68knommu/include/asm/mcfsmc.h similarity index 100% rename from include/asm-m68knommu/mcfsmc.h rename to arch/m68knommu/include/asm/mcfsmc.h diff --git a/include/asm-m68knommu/mcftimer.h b/arch/m68knommu/include/asm/mcftimer.h similarity index 100% rename from include/asm-m68knommu/mcftimer.h rename to arch/m68knommu/include/asm/mcftimer.h diff --git a/include/asm-m68knommu/mcfuart.h b/arch/m68knommu/include/asm/mcfuart.h similarity index 100% rename from include/asm-m68knommu/mcfuart.h rename to arch/m68knommu/include/asm/mcfuart.h diff --git a/include/asm-m68knommu/mcfwdebug.h b/arch/m68knommu/include/asm/mcfwdebug.h similarity index 100% rename from include/asm-m68knommu/mcfwdebug.h rename to arch/m68knommu/include/asm/mcfwdebug.h diff --git a/include/asm-m68knommu/md.h b/arch/m68knommu/include/asm/md.h similarity index 100% rename from include/asm-m68knommu/md.h rename to arch/m68knommu/include/asm/md.h diff --git a/include/asm-m68knommu/mman.h b/arch/m68knommu/include/asm/mman.h similarity index 100% rename from include/asm-m68knommu/mman.h rename to arch/m68knommu/include/asm/mman.h diff --git a/include/asm-m68knommu/mmu.h b/arch/m68knommu/include/asm/mmu.h similarity index 100% rename from include/asm-m68knommu/mmu.h rename to arch/m68knommu/include/asm/mmu.h diff --git a/include/asm-m68knommu/mmu_context.h b/arch/m68knommu/include/asm/mmu_context.h similarity index 100% rename from include/asm-m68knommu/mmu_context.h rename to arch/m68knommu/include/asm/mmu_context.h diff --git a/include/asm-m68knommu/module.h b/arch/m68knommu/include/asm/module.h similarity index 100% rename from include/asm-m68knommu/module.h rename to arch/m68knommu/include/asm/module.h diff --git a/include/asm-m68knommu/movs.h b/arch/m68knommu/include/asm/movs.h similarity index 100% rename from include/asm-m68knommu/movs.h rename to arch/m68knommu/include/asm/movs.h diff --git a/include/asm-m68knommu/msgbuf.h b/arch/m68knommu/include/asm/msgbuf.h similarity index 100% rename from include/asm-m68knommu/msgbuf.h rename to arch/m68knommu/include/asm/msgbuf.h diff --git a/include/asm-m68knommu/mutex.h b/arch/m68knommu/include/asm/mutex.h similarity index 100% rename from include/asm-m68knommu/mutex.h rename to arch/m68knommu/include/asm/mutex.h diff --git a/include/asm-m68knommu/nettel.h b/arch/m68knommu/include/asm/nettel.h similarity index 100% rename from include/asm-m68knommu/nettel.h rename to arch/m68knommu/include/asm/nettel.h diff --git a/include/asm-m68knommu/openprom.h b/arch/m68knommu/include/asm/openprom.h similarity index 100% rename from include/asm-m68knommu/openprom.h rename to arch/m68knommu/include/asm/openprom.h diff --git a/include/asm-m68knommu/oplib.h b/arch/m68knommu/include/asm/oplib.h similarity index 100% rename from include/asm-m68knommu/oplib.h rename to arch/m68knommu/include/asm/oplib.h diff --git a/include/asm-m68knommu/page.h b/arch/m68knommu/include/asm/page.h similarity index 100% rename from include/asm-m68knommu/page.h rename to arch/m68knommu/include/asm/page.h diff --git a/include/asm-m68knommu/page_offset.h b/arch/m68knommu/include/asm/page_offset.h similarity index 100% rename from include/asm-m68knommu/page_offset.h rename to arch/m68knommu/include/asm/page_offset.h diff --git a/include/asm-m68knommu/param.h b/arch/m68knommu/include/asm/param.h similarity index 100% rename from include/asm-m68knommu/param.h rename to arch/m68knommu/include/asm/param.h diff --git a/include/asm-m68knommu/pci.h b/arch/m68knommu/include/asm/pci.h similarity index 100% rename from include/asm-m68knommu/pci.h rename to arch/m68knommu/include/asm/pci.h diff --git a/include/asm-m68knommu/percpu.h b/arch/m68knommu/include/asm/percpu.h similarity index 100% rename from include/asm-m68knommu/percpu.h rename to arch/m68knommu/include/asm/percpu.h diff --git a/include/asm-m68knommu/pgalloc.h b/arch/m68knommu/include/asm/pgalloc.h similarity index 100% rename from include/asm-m68knommu/pgalloc.h rename to arch/m68knommu/include/asm/pgalloc.h diff --git a/include/asm-m68knommu/pgtable.h b/arch/m68knommu/include/asm/pgtable.h similarity index 100% rename from include/asm-m68knommu/pgtable.h rename to arch/m68knommu/include/asm/pgtable.h diff --git a/include/asm-m68knommu/poll.h b/arch/m68knommu/include/asm/poll.h similarity index 100% rename from include/asm-m68knommu/poll.h rename to arch/m68knommu/include/asm/poll.h diff --git a/include/asm-m68knommu/posix_types.h b/arch/m68knommu/include/asm/posix_types.h similarity index 100% rename from include/asm-m68knommu/posix_types.h rename to arch/m68knommu/include/asm/posix_types.h diff --git a/include/asm-m68knommu/processor.h b/arch/m68knommu/include/asm/processor.h similarity index 100% rename from include/asm-m68knommu/processor.h rename to arch/m68knommu/include/asm/processor.h diff --git a/include/asm-m68knommu/ptrace.h b/arch/m68knommu/include/asm/ptrace.h similarity index 100% rename from include/asm-m68knommu/ptrace.h rename to arch/m68knommu/include/asm/ptrace.h diff --git a/include/asm-m68knommu/quicc_simple.h b/arch/m68knommu/include/asm/quicc_simple.h similarity index 100% rename from include/asm-m68knommu/quicc_simple.h rename to arch/m68knommu/include/asm/quicc_simple.h diff --git a/include/asm-m68knommu/resource.h b/arch/m68knommu/include/asm/resource.h similarity index 100% rename from include/asm-m68knommu/resource.h rename to arch/m68knommu/include/asm/resource.h diff --git a/include/asm-m68knommu/rtc.h b/arch/m68knommu/include/asm/rtc.h similarity index 100% rename from include/asm-m68knommu/rtc.h rename to arch/m68knommu/include/asm/rtc.h diff --git a/include/asm-m68knommu/scatterlist.h b/arch/m68knommu/include/asm/scatterlist.h similarity index 100% rename from include/asm-m68knommu/scatterlist.h rename to arch/m68knommu/include/asm/scatterlist.h diff --git a/include/asm-m68knommu/sections.h b/arch/m68knommu/include/asm/sections.h similarity index 100% rename from include/asm-m68knommu/sections.h rename to arch/m68knommu/include/asm/sections.h diff --git a/include/asm-m68knommu/segment.h b/arch/m68knommu/include/asm/segment.h similarity index 100% rename from include/asm-m68knommu/segment.h rename to arch/m68knommu/include/asm/segment.h diff --git a/include/asm-m68knommu/sembuf.h b/arch/m68knommu/include/asm/sembuf.h similarity index 100% rename from include/asm-m68knommu/sembuf.h rename to arch/m68knommu/include/asm/sembuf.h diff --git a/include/asm-m68knommu/setup.h b/arch/m68knommu/include/asm/setup.h similarity index 100% rename from include/asm-m68knommu/setup.h rename to arch/m68knommu/include/asm/setup.h diff --git a/include/asm-m68knommu/shm.h b/arch/m68knommu/include/asm/shm.h similarity index 100% rename from include/asm-m68knommu/shm.h rename to arch/m68knommu/include/asm/shm.h diff --git a/include/asm-m68knommu/shmbuf.h b/arch/m68knommu/include/asm/shmbuf.h similarity index 100% rename from include/asm-m68knommu/shmbuf.h rename to arch/m68knommu/include/asm/shmbuf.h diff --git a/include/asm-m68knommu/shmparam.h b/arch/m68knommu/include/asm/shmparam.h similarity index 100% rename from include/asm-m68knommu/shmparam.h rename to arch/m68knommu/include/asm/shmparam.h diff --git a/include/asm-m68knommu/sigcontext.h b/arch/m68knommu/include/asm/sigcontext.h similarity index 100% rename from include/asm-m68knommu/sigcontext.h rename to arch/m68knommu/include/asm/sigcontext.h diff --git a/include/asm-m68knommu/siginfo.h b/arch/m68knommu/include/asm/siginfo.h similarity index 100% rename from include/asm-m68knommu/siginfo.h rename to arch/m68knommu/include/asm/siginfo.h diff --git a/include/asm-m68knommu/signal.h b/arch/m68knommu/include/asm/signal.h similarity index 100% rename from include/asm-m68knommu/signal.h rename to arch/m68knommu/include/asm/signal.h diff --git a/include/asm-m68knommu/smp.h b/arch/m68knommu/include/asm/smp.h similarity index 100% rename from include/asm-m68knommu/smp.h rename to arch/m68knommu/include/asm/smp.h diff --git a/include/asm-m68knommu/socket.h b/arch/m68knommu/include/asm/socket.h similarity index 100% rename from include/asm-m68knommu/socket.h rename to arch/m68knommu/include/asm/socket.h diff --git a/include/asm-m68knommu/sockios.h b/arch/m68knommu/include/asm/sockios.h similarity index 100% rename from include/asm-m68knommu/sockios.h rename to arch/m68knommu/include/asm/sockios.h diff --git a/include/asm-m68knommu/spinlock.h b/arch/m68knommu/include/asm/spinlock.h similarity index 100% rename from include/asm-m68knommu/spinlock.h rename to arch/m68knommu/include/asm/spinlock.h diff --git a/include/asm-m68knommu/stat.h b/arch/m68knommu/include/asm/stat.h similarity index 100% rename from include/asm-m68knommu/stat.h rename to arch/m68knommu/include/asm/stat.h diff --git a/include/asm-m68knommu/statfs.h b/arch/m68knommu/include/asm/statfs.h similarity index 100% rename from include/asm-m68knommu/statfs.h rename to arch/m68knommu/include/asm/statfs.h diff --git a/include/asm-m68knommu/string.h b/arch/m68knommu/include/asm/string.h similarity index 100% rename from include/asm-m68knommu/string.h rename to arch/m68knommu/include/asm/string.h diff --git a/include/asm-m68knommu/system.h b/arch/m68knommu/include/asm/system.h similarity index 100% rename from include/asm-m68knommu/system.h rename to arch/m68knommu/include/asm/system.h diff --git a/include/asm-m68knommu/termbits.h b/arch/m68knommu/include/asm/termbits.h similarity index 100% rename from include/asm-m68knommu/termbits.h rename to arch/m68knommu/include/asm/termbits.h diff --git a/include/asm-m68knommu/termios.h b/arch/m68knommu/include/asm/termios.h similarity index 100% rename from include/asm-m68knommu/termios.h rename to arch/m68knommu/include/asm/termios.h diff --git a/include/asm-m68knommu/thread_info.h b/arch/m68knommu/include/asm/thread_info.h similarity index 100% rename from include/asm-m68knommu/thread_info.h rename to arch/m68knommu/include/asm/thread_info.h diff --git a/include/asm-m68knommu/timex.h b/arch/m68knommu/include/asm/timex.h similarity index 100% rename from include/asm-m68knommu/timex.h rename to arch/m68knommu/include/asm/timex.h diff --git a/include/asm-m68knommu/tlb.h b/arch/m68knommu/include/asm/tlb.h similarity index 100% rename from include/asm-m68knommu/tlb.h rename to arch/m68knommu/include/asm/tlb.h diff --git a/include/asm-m68knommu/tlbflush.h b/arch/m68knommu/include/asm/tlbflush.h similarity index 100% rename from include/asm-m68knommu/tlbflush.h rename to arch/m68knommu/include/asm/tlbflush.h diff --git a/include/asm-m68knommu/topology.h b/arch/m68knommu/include/asm/topology.h similarity index 100% rename from include/asm-m68knommu/topology.h rename to arch/m68knommu/include/asm/topology.h diff --git a/include/asm-m68knommu/traps.h b/arch/m68knommu/include/asm/traps.h similarity index 100% rename from include/asm-m68knommu/traps.h rename to arch/m68knommu/include/asm/traps.h diff --git a/include/asm-m68knommu/types.h b/arch/m68knommu/include/asm/types.h similarity index 100% rename from include/asm-m68knommu/types.h rename to arch/m68knommu/include/asm/types.h diff --git a/include/asm-m68knommu/uaccess.h b/arch/m68knommu/include/asm/uaccess.h similarity index 100% rename from include/asm-m68knommu/uaccess.h rename to arch/m68knommu/include/asm/uaccess.h diff --git a/include/asm-m68knommu/ucontext.h b/arch/m68knommu/include/asm/ucontext.h similarity index 100% rename from include/asm-m68knommu/ucontext.h rename to arch/m68knommu/include/asm/ucontext.h diff --git a/include/asm-m68knommu/unaligned.h b/arch/m68knommu/include/asm/unaligned.h similarity index 100% rename from include/asm-m68knommu/unaligned.h rename to arch/m68knommu/include/asm/unaligned.h diff --git a/include/asm-m68knommu/unistd.h b/arch/m68knommu/include/asm/unistd.h similarity index 100% rename from include/asm-m68knommu/unistd.h rename to arch/m68knommu/include/asm/unistd.h diff --git a/include/asm-m68knommu/user.h b/arch/m68knommu/include/asm/user.h similarity index 100% rename from include/asm-m68knommu/user.h rename to arch/m68knommu/include/asm/user.h -- GitLab From 6a4c4ad2f0aa331324649579649c5d9064893079 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Wed, 6 Aug 2008 16:14:43 +0200 Subject: [PATCH 0921/1024] myri10ge: update firmware headers Update myri10ge firmware headers. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge_mcp.h | 52 +++++++++++++++++-- .../net/myri10ge/myri10ge_mcp_gen_header.h | 2 +- 2 files changed, 48 insertions(+), 6 deletions(-) diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h index fdbeeee0737..99372109077 100644 --- a/drivers/net/myri10ge/myri10ge_mcp.h +++ b/drivers/net/myri10ge/myri10ge_mcp.h @@ -101,6 +101,8 @@ struct mcp_kreq_ether_recv { #define MXGEFW_ETH_SEND_3 0x2c0000 #define MXGEFW_ETH_RECV_SMALL 0x300000 #define MXGEFW_ETH_RECV_BIG 0x340000 +#define MXGEFW_ETH_SEND_GO 0x380000 +#define MXGEFW_ETH_SEND_STOP 0x3C0000 #define MXGEFW_ETH_SEND(n) (0x200000 + (((n) & 0x03) * 0x40000)) #define MXGEFW_ETH_SEND_OFFSET(n) (MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4) @@ -120,6 +122,11 @@ enum myri10ge_mcp_cmd_type { * MXGEFW_CMD_RESET is issued */ MXGEFW_CMD_SET_INTRQ_DMA, + /* data0 = LSW of the host address + * data1 = MSW of the host address + * data2 = slice number if multiple slices are used + */ + MXGEFW_CMD_SET_BIG_BUFFER_SIZE, /* in bytes, power of 2 */ MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, /* in bytes */ @@ -129,6 +136,8 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_GET_SEND_OFFSET, MXGEFW_CMD_GET_SMALL_RX_OFFSET, MXGEFW_CMD_GET_BIG_RX_OFFSET, + /* data0 = slice number if multiple slices are used */ + MXGEFW_CMD_GET_IRQ_ACK_OFFSET, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET, @@ -200,7 +209,12 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_SET_STATS_DMA_V2, /* data0, data1 = bus addr, * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows - * adding new stuff to mcp_irq_data without changing the ABI */ + * adding new stuff to mcp_irq_data without changing the ABI + * + * If multiple slices are used, data2 contains both the size of the + * structure (in the lower 16 bits) and the slice number + * (in the upper 16 bits). + */ MXGEFW_CMD_UNALIGNED_TEST, /* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned @@ -222,13 +236,18 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_GET_MAX_RSS_QUEUES, MXGEFW_CMD_ENABLE_RSS_QUEUES, /* data0 = number of slices n (0, 1, ..., n-1) to enable - * data1 = interrupt mode. - * 0=share one INTx/MSI, 1=use one MSI-X per queue. + * data1 = interrupt mode | use of multiple transmit queues. + * 0=share one INTx/MSI. + * 1=use one MSI-X per queue. * If all queues share one interrupt, the driver must have set * RSS_SHARED_INTERRUPT_DMA before enabling queues. + * 2=enable both receive and send queues. + * Without this bit set, only one send queue (slice 0's send queue) + * is enabled. The receive queues are always enabled. */ -#define MXGEFW_SLICE_INTR_MODE_SHARED 0 -#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 1 +#define MXGEFW_SLICE_INTR_MODE_SHARED 0x0 +#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 0x1 +#define MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES 0x2 MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET, MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA, @@ -250,10 +269,13 @@ enum myri10ge_mcp_cmd_type { * 2: TCP_IPV4 (required by RSS) * 3: IPV4 | TCP_IPV4 (required by RSS) * 4: source port + * 5: source port + destination port */ #define MXGEFW_RSS_HASH_TYPE_IPV4 0x1 #define MXGEFW_RSS_HASH_TYPE_TCP_IPV4 0x2 #define MXGEFW_RSS_HASH_TYPE_SRC_PORT 0x4 +#define MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT 0x5 +#define MXGEFW_RSS_HASH_TYPE_MAX 0x5 MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE, /* Return data = the max. size of the entire headers of a IPv6 TSO packet. @@ -329,6 +351,20 @@ enum myri10ge_mcp_cmd_type { MXGEFW_CMD_GET_DCA_OFFSET, /* offset of dca control for WDMAs */ + + /* VMWare NetQueue commands */ + MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE, + MXGEFW_CMD_NETQ_ADD_FILTER, + /* data0 = filter_id << 16 | queue << 8 | type */ + /* data1 = MS4 of MAC Addr */ + /* data2 = LS2_MAC << 16 | VLAN_tag */ + MXGEFW_CMD_NETQ_DEL_FILTER, + /* data0 = filter_id */ + MXGEFW_CMD_NETQ_QUERY1, + MXGEFW_CMD_NETQ_QUERY2, + MXGEFW_CMD_NETQ_QUERY3, + MXGEFW_CMD_NETQ_QUERY4, + }; enum myri10ge_mcp_cmd_status { @@ -381,4 +417,10 @@ struct mcp_irq_data { u8 valid; }; +/* definitions for NETQ filter type */ +#define MXGEFW_NETQ_FILTERTYPE_NONE 0 +#define MXGEFW_NETQ_FILTERTYPE_MACADDR 1 +#define MXGEFW_NETQ_FILTERTYPE_VLAN 2 +#define MXGEFW_NETQ_FILTERTYPE_VLANMACADDR 3 + #endif /* __MYRI10GE_MCP_H__ */ diff --git a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h index 07d65c2cbb2..a8662ea8079 100644 --- a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h +++ b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h @@ -35,7 +35,7 @@ struct mcp_gen_header { unsigned char mcp_index; unsigned char disable_rabbit; unsigned char unaligned_tlp; - unsigned char pad1; + unsigned char pcie_link_algo; unsigned counters_addr; unsigned copy_block_info; /* for small mcps loaded with "lload -d" */ unsigned short handoff_id_major; /* must be equal */ -- GitLab From 77970ea50b8e7ee9733a6589bf61ed9c02f20ee9 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Wed, 6 Aug 2008 16:15:23 +0200 Subject: [PATCH 0922/1024] myri10ge: set 64bits consistent DMA mask Set 64bits consistent DMA mask since it improves performance in some cases. No need to check the return value since it is not required for the driver to work. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik --- drivers/net/myri10ge/myri10ge.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 3ab0e5289f7..f1de38f8b74 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -3699,6 +3699,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) dev_err(&pdev->dev, "Error %d setting DMA mask\n", status); goto abort_with_netdev; } + (void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd), &mgp->cmd_bus, GFP_KERNEL); if (mgp->cmd == NULL) -- GitLab From 44defeb3f6f98ea9bb48a2fe6eb9004e9e1a49a1 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Mon, 4 Aug 2008 17:20:41 -0700 Subject: [PATCH 0923/1024] e1000e: convert ndev_ printks to something smaller The ndev_* printk's are too lenghty and we don't need to specify the adapter/netdev struct at all, making this a lot more readable. Signed-off-by: Jeff Kirsher Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/e1000.h | 27 +++--- drivers/net/e1000e/ethtool.c | 44 ++++------ drivers/net/e1000e/netdev.c | 154 ++++++++++++++++------------------- drivers/net/e1000e/param.c | 31 +++---- 4 files changed, 112 insertions(+), 144 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 4a4f62e002b..d3ed1ed6329 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -41,24 +41,25 @@ struct e1000_info; -#define ndev_printk(level, netdev, format, arg...) \ - printk(level "%s: " format, (netdev)->name, ## arg) +#define e_printk(level, adapter, format, arg...) \ + printk(level "%s: %s: " format, pci_name(adapter->pdev), \ + adapter->netdev->name, ## arg) #ifdef DEBUG -#define ndev_dbg(netdev, format, arg...) \ - ndev_printk(KERN_DEBUG , netdev, format, ## arg) +#define e_dbg(format, arg...) \ + e_printk(KERN_DEBUG , adapter, format, ## arg) #else -#define ndev_dbg(netdev, format, arg...) do { (void)(netdev); } while (0) +#define e_dbg(format, arg...) do { (void)(adapter); } while (0) #endif -#define ndev_err(netdev, format, arg...) \ - ndev_printk(KERN_ERR , netdev, format, ## arg) -#define ndev_info(netdev, format, arg...) \ - ndev_printk(KERN_INFO , netdev, format, ## arg) -#define ndev_warn(netdev, format, arg...) \ - ndev_printk(KERN_WARNING , netdev, format, ## arg) -#define ndev_notice(netdev, format, arg...) \ - ndev_printk(KERN_NOTICE , netdev, format, ## arg) +#define e_err(format, arg...) \ + e_printk(KERN_ERR, adapter, format, ## arg) +#define e_info(format, arg...) \ + e_printk(KERN_INFO, adapter, format, ## arg) +#define e_warn(format, arg...) \ + e_printk(KERN_WARNING, adapter, format, ## arg) +#define e_notice(format, arg...) \ + e_printk(KERN_NOTICE, adapter, format, ## arg) /* Tx/Rx descriptor defines */ diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 9350564065e..cf9679f2b7c 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -189,8 +189,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) /* Fiber NICs only allow 1000 gbps Full duplex */ if ((adapter->hw.phy.media_type == e1000_media_type_fiber) && spddplx != (SPEED_1000 + DUPLEX_FULL)) { - ndev_err(adapter->netdev, "Unsupported Speed/Duplex " - "configuration\n"); + e_err("Unsupported Speed/Duplex configuration\n"); return -EINVAL; } @@ -213,8 +212,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) break; case SPEED_1000 + DUPLEX_HALF: /* not supported */ default: - ndev_err(adapter->netdev, "Unsupported Speed/Duplex " - "configuration\n"); + e_err("Unsupported Speed/Duplex configuration\n"); return -EINVAL; } return 0; @@ -231,8 +229,8 @@ static int e1000_set_settings(struct net_device *netdev, * cannot be changed */ if (e1000_check_reset_block(hw)) { - ndev_err(netdev, "Cannot change link " - "characteristics when SoL/IDER is active.\n"); + e_err("Cannot change link characteristics when SoL/IDER is " + "active.\n"); return -EINVAL; } @@ -380,8 +378,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data) netdev->features &= ~NETIF_F_TSO6; } - ndev_info(netdev, "TSO is %s\n", - data ? "Enabled" : "Disabled"); + e_info("TSO is %s\n", data ? "Enabled" : "Disabled"); adapter->flags |= FLAG_TSO_FORCE; return 0; } @@ -722,10 +719,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, (test[pat] & write)); val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset); if (val != (test[pat] & write & mask)) { - ndev_err(adapter->netdev, "pattern test reg %04X " - "failed: got 0x%08X expected 0x%08X\n", - reg + offset, - val, (test[pat] & write & mask)); + e_err("pattern test reg %04X failed: got 0x%08X " + "expected 0x%08X\n", reg + offset, val, + (test[pat] & write & mask)); *data = reg; return 1; } @@ -740,9 +736,8 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, __ew32(&adapter->hw, reg, write & mask); val = __er32(&adapter->hw, reg); if ((write & mask) != (val & mask)) { - ndev_err(adapter->netdev, "set/check reg %04X test failed: " - "got 0x%08X expected 0x%08X\n", reg, (val & mask), - (write & mask)); + e_err("set/check reg %04X test failed: got 0x%08X " + "expected 0x%08X\n", reg, (val & mask), (write & mask)); *data = reg; return 1; } @@ -766,7 +761,6 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) { struct e1000_hw *hw = &adapter->hw; struct e1000_mac_info *mac = &adapter->hw.mac; - struct net_device *netdev = adapter->netdev; u32 value; u32 before; u32 after; @@ -799,8 +793,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) ew32(STATUS, toggle); after = er32(STATUS) & toggle; if (value != after) { - ndev_err(netdev, "failed STATUS register test got: " - "0x%08X expected: 0x%08X\n", after, value); + e_err("failed STATUS register test got: 0x%08X expected: " + "0x%08X\n", after, value); *data = 1; return 1; } @@ -903,8 +897,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) *data = 1; return -1; } - ndev_info(netdev, "testing %s interrupt\n", - (shared_int ? "shared" : "unshared")); + e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared")); /* Disable all the interrupts */ ew32(IMC, 0xFFFFFFFF); @@ -1526,8 +1519,7 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) * sessions are active */ if (e1000_check_reset_block(&adapter->hw)) { - ndev_err(adapter->netdev, "Cannot do PHY loopback test " - "when SoL/IDER is active.\n"); + e_err("Cannot do PHY loopback test when SoL/IDER is active.\n"); *data = 0; goto out; } @@ -1612,7 +1604,7 @@ static void e1000_diag_test(struct net_device *netdev, forced_speed_duplex = adapter->hw.mac.forced_speed_duplex; autoneg = adapter->hw.mac.autoneg; - ndev_info(netdev, "offline testing starting\n"); + e_info("offline testing starting\n"); /* * Link test performed before hardware reset so autoneg doesn't @@ -1658,7 +1650,7 @@ static void e1000_diag_test(struct net_device *netdev, if (if_running) dev_open(netdev); } else { - ndev_info(netdev, "online testing starting\n"); + e_info("online testing starting\n"); /* Online tests */ if (e1000_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1694,8 +1686,8 @@ static void e1000_get_wol(struct net_device *netdev, wol->supported &= ~WAKE_UCAST; if (adapter->wol & E1000_WUFC_EX) - ndev_err(netdev, "Interface does not support " - "directed (unicast) frame wake-up packets\n"); + e_err("Interface does not support directed (unicast) " + "frame wake-up packets\n"); } if (adapter->wol & E1000_WUFC_EX) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index d1367789976..378335f2b23 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -484,8 +484,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, * packet, also make sure the frame isn't just CRC only */ if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) { /* All receives must fit into a single buffer */ - ndev_dbg(netdev, "%s: Receive packet consumed " - "multiple buffers\n", netdev->name); + e_dbg("%s: Receive packet consumed multiple buffers\n", + netdev->name); /* recycle */ buffer_info->skb = skb; goto next_desc; @@ -576,28 +576,26 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter) unsigned int i = tx_ring->next_to_clean; unsigned int eop = tx_ring->buffer_info[i].next_to_watch; struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop); - struct net_device *netdev = adapter->netdev; /* detected Tx unit hang */ - ndev_err(netdev, - "Detected Tx Unit Hang:\n" - " TDH <%x>\n" - " TDT <%x>\n" - " next_to_use <%x>\n" - " next_to_clean <%x>\n" - "buffer_info[next_to_clean]:\n" - " time_stamp <%lx>\n" - " next_to_watch <%x>\n" - " jiffies <%lx>\n" - " next_to_watch.status <%x>\n", - readl(adapter->hw.hw_addr + tx_ring->head), - readl(adapter->hw.hw_addr + tx_ring->tail), - tx_ring->next_to_use, - tx_ring->next_to_clean, - tx_ring->buffer_info[eop].time_stamp, - eop, - jiffies, - eop_desc->upper.fields.status); + e_err("Detected Tx Unit Hang:\n" + " TDH <%x>\n" + " TDT <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "buffer_info[next_to_clean]:\n" + " time_stamp <%lx>\n" + " next_to_watch <%x>\n" + " jiffies <%lx>\n" + " next_to_watch.status <%x>\n", + readl(adapter->hw.hw_addr + tx_ring->head), + readl(adapter->hw.hw_addr + tx_ring->tail), + tx_ring->next_to_use, + tx_ring->next_to_clean, + tx_ring->buffer_info[eop].time_stamp, + eop, + jiffies, + eop_desc->upper.fields.status); } /** @@ -747,8 +745,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, buffer_info->dma = 0; if (!(staterr & E1000_RXD_STAT_EOP)) { - ndev_dbg(netdev, "%s: Packet Split buffers didn't pick " - "up the full packet\n", netdev->name); + e_dbg("%s: Packet Split buffers didn't pick up the " + "full packet\n", netdev->name); dev_kfree_skb_irq(skb); goto next_desc; } @@ -761,8 +759,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, length = le16_to_cpu(rx_desc->wb.middle.length0); if (!length) { - ndev_dbg(netdev, "%s: Last part of the packet spanning" - " multiple descriptors\n", netdev->name); + e_dbg("%s: Last part of the packet spanning multiple " + "descriptors\n", netdev->name); dev_kfree_skb_irq(skb); goto next_desc; } @@ -1011,7 +1009,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, /* eth type trans needs skb->data to point to something */ if (!pskb_may_pull(skb, ETH_HLEN)) { - ndev_err(netdev, "pskb_may_pull failed.\n"); + e_err("pskb_may_pull failed.\n"); dev_kfree_skb(skb); goto next_desc; } @@ -1251,10 +1249,8 @@ static int e1000_request_irq(struct e1000_adapter *adapter) err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name, netdev); if (err) { - ndev_err(netdev, - "Unable to allocate %s interrupt (return: %d)\n", - adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx", - err); + e_err("Unable to allocate %s interrupt (return: %d)\n", + adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx", err); if (adapter->flags & FLAG_MSI_ENABLED) pci_disable_msi(adapter->pdev); } @@ -1395,8 +1391,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter) return 0; err: vfree(tx_ring->buffer_info); - ndev_err(adapter->netdev, - "Unable to allocate memory for the transmit descriptor ring\n"); + e_err("Unable to allocate memory for the transmit descriptor ring\n"); return err; } @@ -1450,8 +1445,7 @@ err_pages: } err: vfree(rx_ring->buffer_info); - ndev_err(adapter->netdev, - "Unable to allocate memory for the transmit descriptor ring\n"); + e_err("Unable to allocate memory for the transmit descriptor ring\n"); return err; } @@ -2456,7 +2450,7 @@ void e1000e_reset(struct e1000_adapter *adapter) ew32(WUC, 0); if (mac->ops.init_hw(hw)) - ndev_err(adapter->netdev, "Hardware Error\n"); + e_err("Hardware Error\n"); e1000_update_mng_vlan(adapter); @@ -2591,7 +2585,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) return 0; err: - ndev_err(netdev, "Unable to allocate memory for queues\n"); + e_err("Unable to allocate memory for queues\n"); kfree(adapter->rx_ring); kfree(adapter->tx_ring); return -ENOMEM; @@ -2917,8 +2911,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000); ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus); if (ret_val) - ndev_warn(adapter->netdev, - "Error reading PHY register\n"); + e_warn("Error reading PHY register\n"); } else { /* * Do not read PHY registers if link is not up @@ -2943,18 +2936,16 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) static void e1000_print_link_info(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; u32 ctrl = er32(CTRL); - ndev_info(netdev, - "Link is Up %d Mbps %s, Flow Control: %s\n", - adapter->link_speed, - (adapter->link_duplex == FULL_DUPLEX) ? - "Full Duplex" : "Half Duplex", - ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ? - "RX/TX" : - ((ctrl & E1000_CTRL_RFCE) ? "RX" : - ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" ))); + e_info("Link is Up %d Mbps %s, Flow Control: %s\n", + adapter->link_speed, + (adapter->link_duplex == FULL_DUPLEX) ? + "Full Duplex" : "Half Duplex", + ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ? + "RX/TX" : + ((ctrl & E1000_CTRL_RFCE) ? "RX" : + ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" ))); } static bool e1000_has_link(struct e1000_adapter *adapter) @@ -2994,8 +2985,7 @@ static bool e1000_has_link(struct e1000_adapter *adapter) if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { /* See e1000_kmrn_lock_loss_workaround_ich8lan() */ - ndev_info(adapter->netdev, - "Gigabit has been disabled, downgrading speed\n"); + e_info("Gigabit has been disabled, downgrading speed\n"); } return link_active; @@ -3096,8 +3086,7 @@ static void e1000_watchdog_task(struct work_struct *work) switch (adapter->link_speed) { case SPEED_10: case SPEED_100: - ndev_info(netdev, - "10/100 speed: disabling TSO\n"); + e_info("10/100 speed: disabling TSO\n"); netdev->features &= ~NETIF_F_TSO; netdev->features &= ~NETIF_F_TSO6; break; @@ -3130,7 +3119,7 @@ static void e1000_watchdog_task(struct work_struct *work) if (netif_carrier_ok(netdev)) { adapter->link_speed = 0; adapter->link_duplex = 0; - ndev_info(netdev, "Link is Down\n"); + e_info("Link is Down\n"); netif_carrier_off(netdev); netif_tx_stop_all_queues(netdev); if (!test_bit(__E1000_DOWN, &adapter->state)) @@ -3604,8 +3593,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) pull_size = min((unsigned int)4, skb->data_len); if (!__pskb_pull_tail(skb, pull_size)) { - ndev_err(netdev, - "__pskb_pull_tail failed.\n"); + e_err("__pskb_pull_tail failed.\n"); dev_kfree_skb_any(skb); return NETDEV_TX_OK; } @@ -3737,25 +3725,25 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { - ndev_err(netdev, "Invalid MTU setting\n"); + e_err("Invalid MTU setting\n"); return -EINVAL; } /* Jumbo frame size limits */ if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) { if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { - ndev_err(netdev, "Jumbo Frames not supported.\n"); + e_err("Jumbo Frames not supported.\n"); return -EINVAL; } if (adapter->hw.phy.type == e1000_phy_ife) { - ndev_err(netdev, "Jumbo Frames not supported.\n"); + e_err("Jumbo Frames not supported.\n"); return -EINVAL; } } #define MAX_STD_JUMBO_FRAME_SIZE 9234 if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { - ndev_err(netdev, "MTU > 9216 not supported.\n"); + e_err("MTU > 9216 not supported.\n"); return -EINVAL; } @@ -3792,8 +3780,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; - ndev_info(netdev, "changing MTU from %d to %d\n", - netdev->mtu, new_mtu); + e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); netdev->mtu = new_mtu; if (netif_running(netdev)) @@ -4175,22 +4162,19 @@ static void e1000_print_device_info(struct e1000_adapter *adapter) u32 pba_num; /* print bus type/speed/width info */ - ndev_info(netdev, "(PCI Express:2.5GB/s:%s) " - "%02x:%02x:%02x:%02x:%02x:%02x\n", - /* bus width */ - ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : - "Width x1"), - /* MAC address */ - netdev->dev_addr[0], netdev->dev_addr[1], - netdev->dev_addr[2], netdev->dev_addr[3], - netdev->dev_addr[4], netdev->dev_addr[5]); - ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n", - (hw->phy.type == e1000_phy_ife) - ? "10/100" : "1000"); + e_info("(PCI Express:2.5GB/s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n", + /* bus width */ + ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : + "Width x1"), + /* MAC address */ + netdev->dev_addr[0], netdev->dev_addr[1], + netdev->dev_addr[2], netdev->dev_addr[3], + netdev->dev_addr[4], netdev->dev_addr[5]); + e_info("Intel(R) PRO/%s Network Connection\n", + (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000"); e1000e_read_pba_num(hw, &pba_num); - ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n", - hw->mac.type, hw->phy.type, - (pba_num >> 8), (pba_num & 0xff)); + e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n", + hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff)); } /** @@ -4366,8 +4350,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, } if (e1000_check_reset_block(&adapter->hw)) - ndev_info(netdev, - "PHY reset is blocked due to SOL/IDER session.\n"); + e_info("PHY reset is blocked due to SOL/IDER session.\n"); netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM | @@ -4411,7 +4394,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (e1000_validate_nvm_checksum(&adapter->hw) >= 0) break; if (i == 2) { - ndev_err(netdev, "The NVM Checksum Is Not Valid\n"); + e_err("The NVM Checksum Is Not Valid\n"); err = -EIO; goto err_eeprom; } @@ -4419,17 +4402,16 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* copy the MAC address out of the NVM */ if (e1000e_read_mac_addr(&adapter->hw)) - ndev_err(netdev, "NVM Read Error while reading MAC address\n"); + e_err("NVM Read Error while reading MAC address\n"); memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); if (!is_valid_ether_addr(netdev->perm_addr)) { - ndev_err(netdev, "Invalid MAC Address: " - "%02x:%02x:%02x:%02x:%02x:%02x\n", - netdev->perm_addr[0], netdev->perm_addr[1], - netdev->perm_addr[2], netdev->perm_addr[3], - netdev->perm_addr[4], netdev->perm_addr[5]); + e_err("Invalid MAC Address: %02x:%02x:%02x:%02x:%02x:%02x\n", + netdev->perm_addr[0], netdev->perm_addr[1], + netdev->perm_addr[2], netdev->perm_addr[3], + netdev->perm_addr[4], netdev->perm_addr[5]); err = -EIO; goto err_eeprom; } diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index a66b92efcf8..8effc3107f9 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -27,6 +27,7 @@ *******************************************************************************/ #include +#include #include "e1000.h" @@ -162,17 +163,16 @@ static int __devinit e1000_validate_option(unsigned int *value, case enable_option: switch (*value) { case OPTION_ENABLED: - ndev_info(adapter->netdev, "%s Enabled\n", opt->name); + e_info("%s Enabled\n", opt->name); return 0; case OPTION_DISABLED: - ndev_info(adapter->netdev, "%s Disabled\n", opt->name); + e_info("%s Disabled\n", opt->name); return 0; } break; case range_option: if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { - ndev_info(adapter->netdev, - "%s set to %i\n", opt->name, *value); + e_info("%s set to %i\n", opt->name, *value); return 0; } break; @@ -184,8 +184,7 @@ static int __devinit e1000_validate_option(unsigned int *value, ent = &opt->arg.l.p[i]; if (*value == ent->i) { if (ent->str[0] != '\0') - ndev_info(adapter->netdev, "%s\n", - ent->str); + e_info("%s\n", ent->str); return 0; } } @@ -195,8 +194,8 @@ static int __devinit e1000_validate_option(unsigned int *value, BUG(); } - ndev_info(adapter->netdev, "Invalid %s value specified (%i) %s\n", - opt->name, *value, opt->err); + e_info("Invalid %s value specified (%i) %s\n", opt->name, *value, + opt->err); *value = opt->def; return -1; } @@ -213,13 +212,11 @@ static int __devinit e1000_validate_option(unsigned int *value, void __devinit e1000e_check_options(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; int bd = adapter->bd_number; if (bd >= E1000_MAX_NIC) { - ndev_notice(netdev, - "Warning: no configuration for board #%i\n", bd); - ndev_notice(netdev, "Using defaults for all values\n"); + e_notice("Warning: no configuration for board #%i\n", bd); + e_notice("Using defaults for all values\n"); } { /* Transmit Interrupt Delay */ @@ -313,19 +310,15 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) adapter->itr = InterruptThrottleRate[bd]; switch (adapter->itr) { case 0: - ndev_info(netdev, "%s turned off\n", - opt.name); + e_info("%s turned off\n", opt.name); break; case 1: - ndev_info(netdev, - "%s set to dynamic mode\n", - opt.name); + e_info("%s set to dynamic mode\n", opt.name); adapter->itr_setting = adapter->itr; adapter->itr = 20000; break; case 3: - ndev_info(netdev, - "%s set to dynamic conservative mode\n", + e_info("%s set to dynamic conservative mode\n", opt.name); adapter->itr_setting = adapter->itr; adapter->itr = 20000; -- GitLab From 10aa4c0447c308738dade244e23036f2fcbfb140 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Mon, 4 Aug 2008 17:21:20 -0700 Subject: [PATCH 0924/1024] e1000e: perform basic 82573 EEPROM checks for known issues 82573 EEPROMs have been shipped out with known issues. While most people will never see the issues some people do and we know how to address them. Warn the user if we find one of these EEPROM issues. Signed-off-by: Auke Kok Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/e1000e/netdev.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 378335f2b23..589e54246ad 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4177,6 +4177,28 @@ static void e1000_print_device_info(struct e1000_adapter *adapter) hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff)); } +static void e1000_eeprom_checks(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + int ret_val; + u16 buf = 0; + + if (hw->mac.type != e1000_82573) + return; + + ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf); + if (!(le16_to_cpu(buf) & (1 << 0))) { + /* Deep Smart Power Down (DSPD) */ + e_warn("Warning: detected DSPD enabled in EEPROM\n"); + } + + ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf); + if (le16_to_cpu(buf) & (3 << 2)) { + /* ASPM enable */ + e_warn("Warning: detected ASPM enabled in EEPROM\n"); + } +} + /** * e1000e_is_need_ioport - determine if an adapter needs ioport resources or not * @pdev: PCI device information struct @@ -4400,6 +4422,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, } } + e1000_eeprom_checks(adapter); + /* copy the MAC address out of the NVM */ if (e1000e_read_mac_addr(&adapter->hw)) e_err("NVM Read Error while reading MAC address\n"); -- GitLab From c43bc57e5d72932b5e64bc5e4e7741bedbcaaf5f Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Mon, 4 Aug 2008 17:21:40 -0700 Subject: [PATCH 0925/1024] e1000e: fix drv load issues a few people seem to have problems maintaining gigabit link and it was root caused to an interaction between the managability firmware on the host and the driver, not communicating. The form of communication they use is the drv_load bit. Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/e1000e/netdev.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 589e54246ad..18f076c01ee 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2444,7 +2444,7 @@ void e1000e_reset(struct e1000_adapter *adapter) * For parts with AMT enabled, let the firmware know * that the network interface is in control */ - if ((adapter->flags & FLAG_HAS_AMT) && e1000e_check_mng_mode(hw)) + if (adapter->flags & FLAG_HAS_AMT) e1000_get_hw_control(adapter); ew32(WUC, 0); @@ -2634,8 +2634,7 @@ static int e1000_open(struct net_device *netdev) * If AMT is enabled, let the firmware know that the network * interface is now open */ - if ((adapter->flags & FLAG_HAS_AMT) && - e1000e_check_mng_mode(&adapter->hw)) + if (adapter->flags & FLAG_HAS_AMT) e1000_get_hw_control(adapter); /* @@ -2713,8 +2712,7 @@ static int e1000_close(struct net_device *netdev) * If AMT is enabled, let the firmware know that the network * interface is now closed */ - if ((adapter->flags & FLAG_HAS_AMT) && - e1000e_check_mng_mode(&adapter->hw)) + if (adapter->flags & FLAG_HAS_AMT) e1000_release_hw_control(adapter); return 0; @@ -4030,7 +4028,7 @@ static int e1000_resume(struct pci_dev *pdev) * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ - if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw)) + if (!(adapter->flags & FLAG_HAS_AMT)) e1000_get_hw_control(adapter); return 0; @@ -4149,8 +4147,7 @@ static void e1000_io_resume(struct pci_dev *pdev) * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ - if (!(adapter->flags & FLAG_HAS_AMT) || - !e1000e_check_mng_mode(&adapter->hw)) + if (!(adapter->flags & FLAG_HAS_AMT)) e1000_get_hw_control(adapter); } @@ -4505,8 +4502,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, * is up. For all other cases, let the f/w know that the h/w is now * under the control of the driver. */ - if (!(adapter->flags & FLAG_HAS_AMT) || - !e1000e_check_mng_mode(&adapter->hw)) + if (!(adapter->flags & FLAG_HAS_AMT)) e1000_get_hw_control(adapter); /* tell the stack to leave us alone until e1000_open() is called */ @@ -4523,19 +4519,19 @@ static int __devinit e1000_probe(struct pci_dev *pdev, return 0; err_register: -err_hw_init: - e1000_release_hw_control(adapter); + if (!(adapter->flags & FLAG_HAS_AMT)) + e1000_release_hw_control(adapter); err_eeprom: if (!e1000_check_reset_block(&adapter->hw)) e1000_phy_hw_reset(&adapter->hw); +err_hw_init: - if (adapter->hw.flash_address) - iounmap(adapter->hw.flash_address); - -err_flashmap: kfree(adapter->tx_ring); kfree(adapter->rx_ring); err_sw_init: + if (adapter->hw.flash_address) + iounmap(adapter->hw.flash_address); +err_flashmap: iounmap(adapter->hw.hw_addr); err_ioremap: free_netdev(netdev); -- GitLab From f0f422e5735ba9f48039aa7dd4c9daa16b996c2c Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Mon, 4 Aug 2008 17:21:53 -0700 Subject: [PATCH 0926/1024] e1000e: remove inapplicable test for ioport There are currently no devices supported by the e1000e driver which need ioport resources, remove the test for it and all unnecessary code associated with it (struct e1000_adapter elements, local variables, etc.) Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/e1000e/e1000.h | 4 ---- drivers/net/e1000e/netdev.c | 48 ++++++++----------------------------- 2 files changed, 10 insertions(+), 42 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index d3ed1ed6329..cf57050d99d 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -284,10 +284,6 @@ struct e1000_adapter { unsigned long led_status; unsigned int flags; - - /* for ioport free */ - int bars; - int need_ioport; }; struct e1000_info { diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 18f076c01ee..05b0b2f9c54 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -3991,10 +3991,7 @@ static int e1000_resume(struct pci_dev *pdev) pci_restore_state(pdev); e1000e_disable_l1aspm(pdev); - if (adapter->need_ioport) - err = pci_enable_device(pdev); - else - err = pci_enable_device_mem(pdev); + err = pci_enable_device_mem(pdev); if (err) { dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n"); @@ -4096,10 +4093,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) int err; e1000e_disable_l1aspm(pdev); - if (adapter->need_ioport) - err = pci_enable_device(pdev); - else - err = pci_enable_device_mem(pdev); + err = pci_enable_device_mem(pdev); if (err) { dev_err(&pdev->dev, "Cannot re-enable PCI device after reset.\n"); @@ -4196,21 +4190,6 @@ static void e1000_eeprom_checks(struct e1000_adapter *adapter) } } -/** - * e1000e_is_need_ioport - determine if an adapter needs ioport resources or not - * @pdev: PCI device information struct - * - * Returns true if an adapters needs ioport resources - **/ -static int e1000e_is_need_ioport(struct pci_dev *pdev) -{ - switch (pdev->device) { - /* Currently there are no adapters that need ioport resources */ - default: - return false; - } -} - /** * e1000_probe - Device Initialization Routine * @pdev: PCI device information struct @@ -4236,19 +4215,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev, int i, err, pci_using_dac; u16 eeprom_data = 0; u16 eeprom_apme_mask = E1000_EEPROM_APME; - int bars, need_ioport; e1000e_disable_l1aspm(pdev); - /* do not allocate ioport bars when not needed */ - need_ioport = e1000e_is_need_ioport(pdev); - if (need_ioport) { - bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO); - err = pci_enable_device(pdev); - } else { - bars = pci_select_bars(pdev, IORESOURCE_MEM); - err = pci_enable_device_mem(pdev); - } + err = pci_enable_device_mem(pdev); if (err) return err; @@ -4271,7 +4241,9 @@ static int __devinit e1000_probe(struct pci_dev *pdev, } } - err = pci_request_selected_regions(pdev, bars, e1000e_driver_name); + err = pci_request_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM), + e1000e_driver_name); if (err) goto err_pci_reg; @@ -4296,8 +4268,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->hw.adapter = adapter; adapter->hw.mac.type = ei->mac; adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; - adapter->bars = bars; - adapter->need_ioport = need_ioport; mmio_start = pci_resource_start(pdev, 0); mmio_len = pci_resource_len(pdev, 0); @@ -4536,7 +4506,8 @@ err_flashmap: err_ioremap: free_netdev(netdev); err_alloc_etherdev: - pci_release_selected_regions(pdev, bars); + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); err_pci_reg: err_dma: pci_disable_device(pdev); @@ -4584,7 +4555,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev) iounmap(adapter->hw.hw_addr); if (adapter->hw.flash_address) iounmap(adapter->hw.flash_address); - pci_release_selected_regions(pdev, adapter->bars); + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); free_netdev(netdev); -- GitLab From c2ac3ef35c44195ca2b9c29275c7c6830eb2d9aa Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Mon, 4 Aug 2008 19:05:10 -0500 Subject: [PATCH 0927/1024] atl1: deal with hardware rx checksum bug The L1 hardware contains a bug that flags a fragmented IP packet as having an incorrect TCP/UDP checksum, even though the packet is perfectly valid and its checksum is correct. There's no way to distinguish between one of these good packets and a packet that actually contains a TCP/UDP checksum error, so all we can do is allow the packet to be handed up to the higher layers and let it be sorted out there. Add a comment describing this condition and remove the code that currently fails to handle what may or may not be a checksum error. Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index f12e3d12474..e6a7bb79d4d 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -1790,6 +1790,17 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter, { struct pci_dev *pdev = adapter->pdev; + /* + * The L1 hardware contains a bug that erroneously sets the + * PACKET_FLAG_ERR and ERR_FLAG_L4_CHKSUM bits whenever a + * fragmented IP packet is received, even though the packet + * is perfectly valid and its checksum is correct. There's + * no way to distinguish between one of these good packets + * and a packet that actually contains a TCP/UDP checksum + * error, so all we can do is allow it to be handed up to + * the higher layers and let it be sorted out there. + */ + skb->ip_summed = CHECKSUM_NONE; if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) { @@ -1816,14 +1827,6 @@ static void atl1_rx_checksum(struct atl1_adapter *adapter, return; } - /* IPv4, but hardware thinks its checksum is wrong */ - if (netif_msg_rx_err(adapter)) - dev_printk(KERN_DEBUG, &pdev->dev, - "hw csum wrong, pkt_flag:%x, err_flag:%x\n", - rrd->pkt_flg, rrd->err_flg); - skb->ip_summed = CHECKSUM_COMPLETE; - skb->csum = htons(rrd->xsz.xsum_sz.rx_chksum); - adapter->hw_csum_err++; return; } -- GitLab From 106ef2fef3778f4af2e0f796a108cc19c6114264 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 4 Aug 2008 14:59:37 -0700 Subject: [PATCH 0928/1024] igb: fix comments The internal name was used in comments, replaced with silicon part number. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/e1000_82575.c | 2 +- drivers/net/igb/igb_main.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index e098f234770..f3d7be0427f 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -1243,7 +1243,7 @@ out: u32 igb_translate_register_82576(u32 reg) { /* - * Some of the Kawela registers are located at different + * Some of the 82576 registers are located at different * offsets than they are in older adapters. * Despite the difference in location, the registers * function in the same manner. diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index b602c4dd0d1..f23a0487bf1 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -311,7 +311,7 @@ static void igb_assign_vector(struct igb_adapter *adapter, int rx_queue, array_wr32(E1000_MSIXBM(0), msix_vector, msixbm); break; case e1000_82576: - /* Kawela uses a table-based method for assigning vectors. + /* The 82576 uses a table-based method for assigning vectors. Each queue has a single entry in the table to which we write a vector number along with a "valid" bit. Sadly, the layout of the table is somewhat counterintuitive. */ -- GitLab From c743a87eabc50110ba5e473e707079c9b429779a Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 4 Aug 2008 14:59:46 -0700 Subject: [PATCH 0929/1024] igb: fix null pointer dereference seen with fiber NICs With a fiber or serdes NIC installed the driver was causing a null pointer dereference on driver unload. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index f23a0487bf1..cfed2b07f3a 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1372,7 +1372,8 @@ static void __devexit igb_remove(struct pci_dev *pdev) unregister_netdev(netdev); - if (!igb_check_reset_block(&adapter->hw)) + if (adapter->hw.phy.ops.reset_phy && + !igb_check_reset_block(&adapter->hw)) adapter->hw.phy.ops.reset_phy(&adapter->hw); igb_remove_device(&adapter->hw); -- GitLab From 726c09e7b6b7b9f9015ae7ce803ba4cd67121d67 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 4 Aug 2008 14:59:56 -0700 Subject: [PATCH 0930/1024] igb: fixes 82576 serdes init to correctly support manual flow control changes This patch changes the PCS configuration for serdes so that the flow control options change be set via the ethtool -A option. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/e1000_82575.c | 6 ++++++ drivers/net/igb/e1000_defines.h | 1 + 2 files changed, 7 insertions(+) diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index f3d7be0427f..cd75a2bc24a 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -1136,6 +1136,12 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) E1000_PCS_LCTL_FORCE_LINK; /* Force Link */ hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg); } + + if (hw->mac.type == e1000_82576) { + reg |= E1000_PCS_LCTL_FORCE_FCTRL; + igb_force_mac_fc(hw); + } + wr32(E1000_PCS_LCTL, reg); return 0; diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h index afdba3c9073..ce700689fb5 100644 --- a/drivers/net/igb/e1000_defines.h +++ b/drivers/net/igb/e1000_defines.h @@ -257,6 +257,7 @@ #define E1000_PCS_LCTL_FDV_FULL 8 #define E1000_PCS_LCTL_FSD 0x10 #define E1000_PCS_LCTL_FORCE_LINK 0x20 +#define E1000_PCS_LCTL_FORCE_FCTRL 0x80 #define E1000_PCS_LCTL_AN_ENABLE 0x10000 #define E1000_PCS_LCTL_AN_RESTART 0x20000 #define E1000_PCS_LCTL_AN_TIMEOUT 0x40000 -- GitLab From 549bdd84dce242e15a9d7b42787ae481ba29f458 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 4 Aug 2008 15:00:06 -0700 Subject: [PATCH 0931/1024] igb: correct issue of set_mta member of mac.ops not being populated The igb_mta_set function was not being correctly used Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/e1000_82575.c | 2 +- drivers/net/igb/e1000_hw.h | 1 - drivers/net/igb/e1000_mac.c | 2 +- drivers/net/igb/e1000_mac.h | 1 + 4 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index cd75a2bc24a..76f9f866f8c 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -850,7 +850,7 @@ void igb_update_mc_addr_list_82575(struct e1000_hw *hw, for (; mc_addr_count > 0; mc_addr_count--) { hash_value = igb_hash_mc_addr(hw, mc_addr_list); hw_dbg("Hash value = 0x%03X\n", hash_value); - hw->mac.ops.mta_set(hw, hash_value); + igb_mta_set(hw, hash_value); mc_addr_list += ETH_ALEN; } } diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h index 19fa4ee96f2..a65ccc3095c 100644 --- a/drivers/net/igb/e1000_hw.h +++ b/drivers/net/igb/e1000_hw.h @@ -420,7 +420,6 @@ struct e1000_mac_operations { void (*rar_set)(struct e1000_hw *, u8 *, u32); s32 (*read_mac_addr)(struct e1000_hw *); s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *); - void (*mta_set)(struct e1000_hw *, u32); }; struct e1000_phy_operations { diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index 20408aa1f91..9b0f0afdaeb 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -271,7 +271,7 @@ void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) * current value is read, the new bit is OR'd in and the new value is * written back into the register. **/ -static void igb_mta_set(struct e1000_hw *hw, u32 hash_value) +void igb_mta_set(struct e1000_hw *hw, u32 hash_value) { u32 hash_bit, hash_reg, mta; diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h index dc2f8cce15e..c2a9365ee04 100644 --- a/drivers/net/igb/e1000_mac.h +++ b/drivers/net/igb/e1000_mac.h @@ -63,6 +63,7 @@ void igb_clear_hw_cntrs_base(struct e1000_hw *hw); void igb_clear_vfta(struct e1000_hw *hw); void igb_config_collision_dist(struct e1000_hw *hw); void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count); +void igb_mta_set(struct e1000_hw *hw, u32 hash_value); void igb_put_hw_semaphore(struct e1000_hw *hw); void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index); s32 igb_check_alt_mac_addr(struct e1000_hw *hw); -- GitLab From ec796b4ffc947f74e9e85198d1648e9556300c55 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 4 Aug 2008 15:00:18 -0700 Subject: [PATCH 0932/1024] igb: remove three redundant functions left in the code Three functions were left in the code that are no longer used. I am removing these functions just to keep the code clean. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/e1000_82575.c | 64 --------------------------- drivers/net/igb/e1000_82575.h | 1 - drivers/net/igb/e1000_mac.c | 82 ----------------------------------- drivers/net/igb/e1000_mac.h | 4 -- drivers/net/igb/e1000_regs.h | 3 -- 5 files changed, 154 deletions(-) diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index 76f9f866f8c..bb823acc744 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -1237,70 +1237,6 @@ out: return ret_val; } -/** - * igb_translate_register_82576 - Translate the proper register offset - * @reg: e1000 register to be read - * - * Registers in 82576 are located in different offsets than other adapters - * even though they function in the same manner. This function takes in - * the name of the register to read and returns the correct offset for - * 82576 silicon. - **/ -u32 igb_translate_register_82576(u32 reg) -{ - /* - * Some of the 82576 registers are located at different - * offsets than they are in older adapters. - * Despite the difference in location, the registers - * function in the same manner. - */ - switch (reg) { - case E1000_TDBAL(0): - reg = 0x0E000; - break; - case E1000_TDBAH(0): - reg = 0x0E004; - break; - case E1000_TDLEN(0): - reg = 0x0E008; - break; - case E1000_TDH(0): - reg = 0x0E010; - break; - case E1000_TDT(0): - reg = 0x0E018; - break; - case E1000_TXDCTL(0): - reg = 0x0E028; - break; - case E1000_RDBAL(0): - reg = 0x0C000; - break; - case E1000_RDBAH(0): - reg = 0x0C004; - break; - case E1000_RDLEN(0): - reg = 0x0C008; - break; - case E1000_RDH(0): - reg = 0x0C010; - break; - case E1000_RDT(0): - reg = 0x0C018; - break; - case E1000_RXDCTL(0): - reg = 0x0C028; - break; - case E1000_SRRCTL(0): - reg = 0x0C00C; - break; - default: - break; - } - - return reg; -} - /** * igb_reset_init_script_82575 - Inits HW defaults after reset * @hw: pointer to the HW structure diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h index 2f848e578a2..c1928b5efe1 100644 --- a/drivers/net/igb/e1000_82575.h +++ b/drivers/net/igb/e1000_82575.h @@ -28,7 +28,6 @@ #ifndef _E1000_82575_H_ #define _E1000_82575_H_ -u32 igb_translate_register_82576(u32 reg); void igb_update_mc_addr_list_82575(struct e1000_hw*, u8*, u32, u32, u32); extern void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw); extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw); diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index 9b0f0afdaeb..e18747c70be 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -143,34 +143,6 @@ void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) wrfl(); } -/** - * igb_init_rx_addrs - Initialize receive address's - * @hw: pointer to the HW structure - * @rar_count: receive address registers - * - * Setups the receive address registers by setting the base receive address - * register to the devices MAC address and clearing all the other receive - * address registers to 0. - **/ -void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) -{ - u32 i; - - /* Setup the receive address */ - hw_dbg("Programming MAC Address into RAR[0]\n"); - - hw->mac.ops.rar_set(hw, hw->mac.addr, 0); - - /* Zero out the other (rar_entry_count - 1) receive addresses */ - hw_dbg("Clearing RAR[1-%u]\n", rar_count-1); - for (i = 1; i < rar_count; i++) { - array_wr32(E1000_RA, (i << 1), 0); - wrfl(); - array_wr32(E1000_RA, ((i << 1) + 1), 0); - wrfl(); - } -} - /** * igb_check_alt_mac_addr - Check for alternate MAC addr * @hw: pointer to the HW structure @@ -296,60 +268,6 @@ void igb_mta_set(struct e1000_hw *hw, u32 hash_value) wrfl(); } -/** - * igb_update_mc_addr_list - Update Multicast addresses - * @hw: pointer to the HW structure - * @mc_addr_list: array of multicast addresses to program - * @mc_addr_count: number of multicast addresses to program - * @rar_used_count: the first RAR register free to program - * @rar_count: total number of supported Receive Address Registers - * - * Updates the Receive Address Registers and Multicast Table Array. - * The caller must have a packed mc_addr_list of multicast addresses. - * The parameter rar_count will usually be hw->mac.rar_entry_count - * unless there are workarounds that change this. - **/ -void igb_update_mc_addr_list(struct e1000_hw *hw, - u8 *mc_addr_list, u32 mc_addr_count, - u32 rar_used_count, u32 rar_count) -{ - u32 hash_value; - u32 i; - - /* - * Load the first set of multicast addresses into the exact - * filters (RAR). If there are not enough to fill the RAR - * array, clear the filters. - */ - for (i = rar_used_count; i < rar_count; i++) { - if (mc_addr_count) { - hw->mac.ops.rar_set(hw, mc_addr_list, i); - mc_addr_count--; - mc_addr_list += ETH_ALEN; - } else { - array_wr32(E1000_RA, i << 1, 0); - wrfl(); - array_wr32(E1000_RA, (i << 1) + 1, 0); - wrfl(); - } - } - - /* Clear the old settings from the MTA */ - hw_dbg("Clearing MTA\n"); - for (i = 0; i < hw->mac.mta_reg_count; i++) { - array_wr32(E1000_MTA, i, 0); - wrfl(); - } - - /* Load any remaining multicast addresses into the hash table. */ - for (; mc_addr_count > 0; mc_addr_count--) { - hash_value = igb_hash_mc_addr(hw, mc_addr_list); - hw_dbg("Hash value = 0x%03X\n", hash_value); - igb_mta_set(hw, hash_value); - mc_addr_list += ETH_ALEN; - } -} - /** * igb_hash_mc_addr - Generate a multicast hash value * @hw: pointer to the HW structure diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h index c2a9365ee04..cbee6af7d91 100644 --- a/drivers/net/igb/e1000_mac.h +++ b/drivers/net/igb/e1000_mac.h @@ -51,9 +51,6 @@ s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex); s32 igb_id_led_init(struct e1000_hw *hw); s32 igb_led_off(struct e1000_hw *hw); -void igb_update_mc_addr_list(struct e1000_hw *hw, - u8 *mc_addr_list, u32 mc_addr_count, - u32 rar_used_count, u32 rar_count); s32 igb_setup_link(struct e1000_hw *hw); s32 igb_validate_mdi_setting(struct e1000_hw *hw); s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, @@ -62,7 +59,6 @@ s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, void igb_clear_hw_cntrs_base(struct e1000_hw *hw); void igb_clear_vfta(struct e1000_hw *hw); void igb_config_collision_dist(struct e1000_hw *hw); -void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count); void igb_mta_set(struct e1000_hw *hw, u32 hash_value); void igb_put_hw_semaphore(struct e1000_hw *hw); void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index); diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h index b95093d24c0..95523af2605 100644 --- a/drivers/net/igb/e1000_regs.h +++ b/drivers/net/igb/e1000_regs.h @@ -262,9 +262,6 @@ #define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) #define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */ -#define E1000_REGISTER(a, reg) (((a)->mac.type < e1000_82576) \ - ? reg : e1000_translate_register_82576(reg)) - #define wr32(reg, value) (writel(value, hw->hw_addr + reg)) #define rd32(reg) (readl(hw->hw_addr + reg)) #define wrfl() ((void)rd32(E1000_STATUS)) -- GitLab From a6ef5e9d7dd6f3de4f88b68c390f0f0d7072944c Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 4 Aug 2008 15:00:27 -0700 Subject: [PATCH 0933/1024] igb: remove igb_init_managability as it is deprecated igb_init_managability does not actually perform any function as the two registers it attempts to write are both read only on the host. This patch removes the function and all references to it from the driver. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik --- drivers/net/igb/igb_main.c | 25 ------------------------- 1 file changed, 25 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index cfed2b07f3a..8f66e15ec8d 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -720,28 +720,6 @@ static void igb_get_hw_control(struct igb_adapter *adapter) ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); } -static void igb_init_manageability(struct igb_adapter *adapter) -{ - struct e1000_hw *hw = &adapter->hw; - - if (adapter->en_mng_pt) { - u32 manc2h = rd32(E1000_MANC2H); - u32 manc = rd32(E1000_MANC); - - /* enable receiving management packets to the host */ - /* this will probably generate destination unreachable messages - * from the host OS, but the packets will be handled on SMBUS */ - manc |= E1000_MANC_EN_MNG2HOST; -#define E1000_MNG2HOST_PORT_623 (1 << 5) -#define E1000_MNG2HOST_PORT_664 (1 << 6) - manc2h |= E1000_MNG2HOST_PORT_623; - manc2h |= E1000_MNG2HOST_PORT_664; - wr32(E1000_MANC2H, manc2h); - - wr32(E1000_MANC, manc); - } -} - /** * igb_configure - configure the hardware for RX and TX * @adapter: private board structure @@ -755,7 +733,6 @@ static void igb_configure(struct igb_adapter *adapter) igb_set_multi(netdev); igb_restore_vlan(adapter); - igb_init_manageability(adapter); igb_configure_tx(adapter); igb_setup_rctl(adapter); @@ -4524,8 +4501,6 @@ static void igb_io_resume(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct igb_adapter *adapter = netdev_priv(netdev); - igb_init_manageability(adapter); - if (netif_running(netdev)) { if (igb_up(adapter)) { dev_err(&pdev->dev, "igb_up failed after reset\n"); -- GitLab From f71eb1a24a8cdde8d388c8f93e935aa7ac491047 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 4 Aug 2008 13:33:37 -0700 Subject: [PATCH 0934/1024] sky2: fix PM related regressions Fix the problems reported for 2.6.27-rc1 caused by over aggressive power management. Turning clock off on PCI Express is problematic for WOL, and when doing multi-booting. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 103 +++++---------------------------------------- drivers/net/sky2.h | 2 - 2 files changed, 10 insertions(+), 95 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 5257cf464f1..7d29edcd40b 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -275,86 +275,6 @@ static void sky2_power_aux(struct sky2_hw *hw) PC_VAUX_ON | PC_VCC_OFF)); } -static void sky2_power_state(struct sky2_hw *hw, pci_power_t state) -{ - u16 power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL); - int pex = pci_find_capability(hw->pdev, PCI_CAP_ID_EXP); - u32 reg; - - sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - - switch (state) { - case PCI_D0: - break; - - case PCI_D1: - power_control |= 1; - break; - - case PCI_D2: - power_control |= 2; - break; - - case PCI_D3hot: - case PCI_D3cold: - power_control |= 3; - if (hw->flags & SKY2_HW_ADV_POWER_CTL) { - /* additional power saving measurements */ - reg = sky2_pci_read32(hw, PCI_DEV_REG4); - - /* set gating core clock for LTSSM in L1 state */ - reg |= P_PEX_LTSSM_STAT(P_PEX_LTSSM_L1_STAT) | - /* auto clock gated scheme controlled by CLKREQ */ - P_ASPM_A1_MODE_SELECT | - /* enable Gate Root Core Clock */ - P_CLK_GATE_ROOT_COR_ENA; - - if (pex && (hw->flags & SKY2_HW_CLK_POWER)) { - /* enable Clock Power Management (CLKREQ) */ - u16 ctrl = sky2_pci_read16(hw, pex + PCI_EXP_DEVCTL); - - ctrl |= PCI_EXP_DEVCTL_AUX_PME; - sky2_pci_write16(hw, pex + PCI_EXP_DEVCTL, ctrl); - } else - /* force CLKREQ Enable in Our4 (A1b only) */ - reg |= P_ASPM_FORCE_CLKREQ_ENA; - - /* set Mask Register for Release/Gate Clock */ - sky2_pci_write32(hw, PCI_DEV_REG5, - P_REL_PCIE_EXIT_L1_ST | P_GAT_PCIE_ENTER_L1_ST | - P_REL_PCIE_RX_EX_IDLE | P_GAT_PCIE_RX_EL_IDLE | - P_REL_GPHY_LINK_UP | P_GAT_GPHY_LINK_DOWN); - } else - sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_CLK_HALT); - - /* put CPU into reset state */ - sky2_write8(hw, B28_Y2_ASF_STAT_CMD, HCU_CCSR_ASF_RESET); - if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev == CHIP_REV_YU_SU_A0) - /* put CPU into halt state */ - sky2_write8(hw, B28_Y2_ASF_STAT_CMD, HCU_CCSR_ASF_HALTED); - - if (pex && !(hw->flags & SKY2_HW_RAM_BUFFER)) { - reg = sky2_pci_read32(hw, PCI_DEV_REG1); - /* force to PCIe L1 */ - reg |= PCI_FORCE_PEX_L1; - sky2_pci_write32(hw, PCI_DEV_REG1, reg); - } - break; - - default: - dev_warn(&hw->pdev->dev, PFX "Invalid power state (%d) ", - state); - return; - } - - power_control |= PCI_PM_CTRL_PME_ENABLE; - /* Finally, set the new power state. */ - sky2_pci_write32(hw, hw->pm_cap + PCI_PM_CTRL, power_control); - - sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); - sky2_pci_read32(hw, B0_CTST); -} - static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port) { u16 reg; @@ -709,6 +629,11 @@ static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port) sky2_pci_write32(hw, PCI_DEV_REG1, reg1); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); sky2_pci_read32(hw, PCI_DEV_REG1); + + if (hw->chip_id == CHIP_ID_YUKON_FE) + gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE); + else if (hw->flags & SKY2_HW_ADV_POWER_CTL) + sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); } static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port) @@ -2855,10 +2780,6 @@ static int __devinit sky2_init(struct sky2_hw *hw) hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY | SKY2_HW_ADV_POWER_CTL; - - /* check for Rev. A1 dev 4200 */ - if (sky2_read16(hw, Q_ADDR(Q_XA1, Q_WM)) == 0) - hw->flags |= SKY2_HW_CLK_POWER; break; case CHIP_ID_YUKON_EX: @@ -2914,12 +2835,6 @@ static int __devinit sky2_init(struct sky2_hw *hw) if (hw->pmd_type == 'L' || hw->pmd_type == 'S' || hw->pmd_type == 'P') hw->flags |= SKY2_HW_FIBRE_PHY; - hw->pm_cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PM); - if (hw->pm_cap == 0) { - dev_err(&hw->pdev->dev, "cannot find PowerManagement capability\n"); - return -EIO; - } - hw->ports = 1; t8 = sky2_read8(hw, B2_Y2_HW_RES); if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) { @@ -4512,7 +4427,7 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state) pci_save_state(pdev); pci_enable_wake(pdev, pci_choose_state(pdev, state), wol); - sky2_power_state(hw, pci_choose_state(pdev, state)); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); return 0; } @@ -4525,7 +4440,9 @@ static int sky2_resume(struct pci_dev *pdev) if (!hw) return 0; - sky2_power_state(hw, PCI_D0); + err = pci_set_power_state(pdev, PCI_D0); + if (err) + goto out; err = pci_restore_state(pdev); if (err) @@ -4595,7 +4512,7 @@ static void sky2_shutdown(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3cold, wol); pci_disable_device(pdev); - sky2_power_state(hw, PCI_D3hot); + pci_set_power_state(pdev, PCI_D3hot); } static struct pci_driver sky2_driver = { diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 4d9c4a19bb8..92fb24b27d4 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -2072,9 +2072,7 @@ struct sky2_hw { #define SKY2_HW_NEW_LE 0x00000020 /* new LSOv2 format */ #define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */ #define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */ -#define SKY2_HW_CLK_POWER 0x00000100 /* clock power management */ - int pm_cap; u8 chip_id; u8 chip_rev; u8 pmd_type; -- GitLab From 1ef6841b4c4d9cc26e53271016c1d432ea65ed24 Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Wed, 6 Aug 2008 12:11:03 -0400 Subject: [PATCH 0935/1024] forcedeth: fix rx error policy This patch enforces a stricter policy on rx errors. The driver needs to verify whether there are multiple rx errors versus a single error. Signed-off-by: Ayaz Abdulla Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 01b38b092c7..a39ed1365d6 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -402,6 +402,7 @@ union ring_type { #define NV_RX_FRAMINGERR (1<<29) #define NV_RX_ERROR (1<<30) #define NV_RX_AVAIL (1<<31) +#define NV_RX_ERROR_MASK (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3|NV_RX_ERROR4|NV_RX_CRCERR|NV_RX_OVERFLOW|NV_RX_FRAMINGERR) #define NV_RX2_CHECKSUMMASK (0x1C000000) #define NV_RX2_CHECKSUM_IP (0x10000000) @@ -419,6 +420,7 @@ union ring_type { /* error and avail are the same for both */ #define NV_RX2_ERROR (1<<30) #define NV_RX2_AVAIL (1<<31) +#define NV_RX2_ERROR_MASK (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3|NV_RX2_ERROR4|NV_RX2_CRCERR|NV_RX2_OVERFLOW|NV_RX2_FRAMINGERR) #define NV_RX3_VLAN_TAG_PRESENT (1<<16) #define NV_RX3_VLAN_TAG_MASK (0x0000FFFF) @@ -2632,7 +2634,7 @@ static int nv_rx_process(struct net_device *dev, int limit) if (likely(flags & NV_RX_DESCRIPTORVALID)) { len = flags & LEN_MASK_V1; if (unlikely(flags & NV_RX_ERROR)) { - if (flags & NV_RX_ERROR4) { + if ((flags & NV_RX_ERROR_MASK) == NV_RX_ERROR4) { len = nv_getlen(dev, skb->data, len); if (len < 0) { dev->stats.rx_errors++; @@ -2641,7 +2643,7 @@ static int nv_rx_process(struct net_device *dev, int limit) } } /* framing errors are soft errors */ - else if (flags & NV_RX_FRAMINGERR) { + else if ((flags & NV_RX_ERROR_MASK) == NV_RX_FRAMINGERR) { if (flags & NV_RX_SUBSTRACT1) { len--; } @@ -2667,7 +2669,7 @@ static int nv_rx_process(struct net_device *dev, int limit) if (likely(flags & NV_RX2_DESCRIPTORVALID)) { len = flags & LEN_MASK_V2; if (unlikely(flags & NV_RX2_ERROR)) { - if (flags & NV_RX2_ERROR4) { + if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_ERROR4) { len = nv_getlen(dev, skb->data, len); if (len < 0) { dev->stats.rx_errors++; @@ -2676,7 +2678,7 @@ static int nv_rx_process(struct net_device *dev, int limit) } } /* framing errors are soft errors */ - else if (flags & NV_RX2_FRAMINGERR) { + else if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_FRAMINGERR) { if (flags & NV_RX2_SUBSTRACT1) { len--; } @@ -2766,7 +2768,7 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit) if (likely(flags & NV_RX2_DESCRIPTORVALID)) { len = flags & LEN_MASK_V2; if (unlikely(flags & NV_RX2_ERROR)) { - if (flags & NV_RX2_ERROR4) { + if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_ERROR4) { len = nv_getlen(dev, skb->data, len); if (len < 0) { dev_kfree_skb(skb); @@ -2774,7 +2776,7 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit) } } /* framing errors are soft errors */ - else if (flags & NV_RX2_FRAMINGERR) { + else if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_FRAMINGERR) { if (flags & NV_RX2_SUBSTRACT1) { len--; } -- GitLab From 9c6624352cdba7ef4859dae44eb48d538ac78d1b Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Wed, 6 Aug 2008 12:11:42 -0400 Subject: [PATCH 0936/1024] forcedeth: add new tx stat counters This patch adds support for new tx statistic counters in the hardware - unicast, multicast, and broadcast Signed-off-by: Ayaz Abdulla Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 89 ++++++++++++++++++++++++++--------------- 1 file changed, 56 insertions(+), 33 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index a39ed1365d6..3749a997089 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -77,26 +77,27 @@ * Hardware access: */ -#define DEV_NEED_TIMERIRQ 0x00001 /* set the timer irq flag in the irq mask */ -#define DEV_NEED_LINKTIMER 0x00002 /* poll link settings. Relies on the timer irq */ -#define DEV_HAS_LARGEDESC 0x00004 /* device supports jumbo frames and needs packet format 2 */ -#define DEV_HAS_HIGH_DMA 0x00008 /* device supports 64bit dma */ -#define DEV_HAS_CHECKSUM 0x00010 /* device supports tx and rx checksum offloads */ -#define DEV_HAS_VLAN 0x00020 /* device supports vlan tagging and striping */ -#define DEV_HAS_MSI 0x00040 /* device supports MSI */ -#define DEV_HAS_MSI_X 0x00080 /* device supports MSI-X */ -#define DEV_HAS_POWER_CNTRL 0x00100 /* device supports power savings */ -#define DEV_HAS_STATISTICS_V1 0x00200 /* device supports hw statistics version 1 */ -#define DEV_HAS_STATISTICS_V2 0x00400 /* device supports hw statistics version 2 */ -#define DEV_HAS_TEST_EXTENDED 0x00800 /* device supports extended diagnostic test */ -#define DEV_HAS_MGMT_UNIT 0x01000 /* device supports management unit */ -#define DEV_HAS_CORRECT_MACADDR 0x02000 /* device supports correct mac address order */ -#define DEV_HAS_COLLISION_FIX 0x04000 /* device supports tx collision fix */ -#define DEV_HAS_PAUSEFRAME_TX_V1 0x08000 /* device supports tx pause frames version 1 */ -#define DEV_HAS_PAUSEFRAME_TX_V2 0x10000 /* device supports tx pause frames version 2 */ -#define DEV_HAS_PAUSEFRAME_TX_V3 0x20000 /* device supports tx pause frames version 3 */ -#define DEV_NEED_TX_LIMIT 0x40000 /* device needs to limit tx */ -#define DEV_HAS_GEAR_MODE 0x80000 /* device supports gear mode */ +#define DEV_NEED_TIMERIRQ 0x000001 /* set the timer irq flag in the irq mask */ +#define DEV_NEED_LINKTIMER 0x000002 /* poll link settings. Relies on the timer irq */ +#define DEV_HAS_LARGEDESC 0x000004 /* device supports jumbo frames and needs packet format 2 */ +#define DEV_HAS_HIGH_DMA 0x000008 /* device supports 64bit dma */ +#define DEV_HAS_CHECKSUM 0x000010 /* device supports tx and rx checksum offloads */ +#define DEV_HAS_VLAN 0x000020 /* device supports vlan tagging and striping */ +#define DEV_HAS_MSI 0x000040 /* device supports MSI */ +#define DEV_HAS_MSI_X 0x000080 /* device supports MSI-X */ +#define DEV_HAS_POWER_CNTRL 0x000100 /* device supports power savings */ +#define DEV_HAS_STATISTICS_V1 0x000200 /* device supports hw statistics version 1 */ +#define DEV_HAS_STATISTICS_V2 0x000400 /* device supports hw statistics version 2 */ +#define DEV_HAS_STATISTICS_V3 0x000800 /* device supports hw statistics version 3 */ +#define DEV_HAS_TEST_EXTENDED 0x001000 /* device supports extended diagnostic test */ +#define DEV_HAS_MGMT_UNIT 0x002000 /* device supports management unit */ +#define DEV_HAS_CORRECT_MACADDR 0x004000 /* device supports correct mac address order */ +#define DEV_HAS_COLLISION_FIX 0x008000 /* device supports tx collision fix */ +#define DEV_HAS_PAUSEFRAME_TX_V1 0x010000 /* device supports tx pause frames version 1 */ +#define DEV_HAS_PAUSEFRAME_TX_V2 0x020000 /* device supports tx pause frames version 2 */ +#define DEV_HAS_PAUSEFRAME_TX_V3 0x040000 /* device supports tx pause frames version 3 */ +#define DEV_NEED_TX_LIMIT 0x080000 /* device needs to limit tx */ +#define DEV_HAS_GEAR_MODE 0x100000 /* device supports gear mode */ enum { NvRegIrqStatus = 0x000, @@ -270,6 +271,9 @@ enum { #define NVREG_MIICTL_WRITE 0x00400 #define NVREG_MIICTL_ADDRSHIFT 5 NvRegMIIData = 0x194, + NvRegTxUnicast = 0x1a0, + NvRegTxMulticast = 0x1a4, + NvRegTxBroadcast = 0x1a8, NvRegWakeUpFlags = 0x200, #define NVREG_WAKEUPFLAGS_VAL 0x7770 #define NVREG_WAKEUPFLAGS_BUSYSHIFT 24 @@ -618,7 +622,12 @@ static const struct nv_ethtool_str nv_estats_str[] = { { "rx_bytes" }, { "tx_pause" }, { "rx_pause" }, - { "rx_drop_frame" } + { "rx_drop_frame" }, + + /* version 3 stats */ + { "tx_unicast" }, + { "tx_multicast" }, + { "tx_broadcast" } }; struct nv_ethtool_stats { @@ -654,9 +663,15 @@ struct nv_ethtool_stats { u64 tx_pause; u64 rx_pause; u64 rx_drop_frame; + + /* version 3 stats */ + u64 tx_unicast; + u64 tx_multicast; + u64 tx_broadcast; }; -#define NV_DEV_STATISTICS_V2_COUNT (sizeof(struct nv_ethtool_stats)/sizeof(u64)) +#define NV_DEV_STATISTICS_V3_COUNT (sizeof(struct nv_ethtool_stats)/sizeof(u64)) +#define NV_DEV_STATISTICS_V2_COUNT (NV_DEV_STATISTICS_V3_COUNT - 3) #define NV_DEV_STATISTICS_V1_COUNT (NV_DEV_STATISTICS_V2_COUNT - 6) /* diagnostics */ @@ -1630,6 +1645,12 @@ static void nv_get_hw_stats(struct net_device *dev) np->estats.rx_pause += readl(base + NvRegRxPause); np->estats.rx_drop_frame += readl(base + NvRegRxDropFrame); } + + if (np->driver_data & DEV_HAS_STATISTICS_V3) { + np->estats.tx_unicast += readl(base + NvRegTxUnicast); + np->estats.tx_multicast += readl(base + NvRegTxMulticast); + np->estats.tx_broadcast += readl(base + NvRegTxBroadcast); + } } /* @@ -1643,7 +1664,7 @@ static struct net_device_stats *nv_get_stats(struct net_device *dev) struct fe_priv *np = netdev_priv(dev); /* If the nic supports hw counters then retrieve latest values */ - if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2)) { + if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3)) { nv_get_hw_stats(dev); /* copy to net_device stats */ @@ -4742,6 +4763,8 @@ static int nv_get_sset_count(struct net_device *dev, int sset) return NV_DEV_STATISTICS_V1_COUNT; else if (np->driver_data & DEV_HAS_STATISTICS_V2) return NV_DEV_STATISTICS_V2_COUNT; + else if (np->driver_data & DEV_HAS_STATISTICS_V3) + return NV_DEV_STATISTICS_V3_COUNT; else return 0; default: @@ -5326,7 +5349,7 @@ static int nv_open(struct net_device *dev) mod_timer(&np->oom_kick, jiffies + OOM_REFILL); /* start statistics timer */ - if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2)) + if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3)) mod_timer(&np->stats_poll, round_jiffies(jiffies + STATS_INTERVAL)); @@ -5430,7 +5453,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i if (err < 0) goto out_disable; - if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V2)) + if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V2|DEV_HAS_STATISTICS_V3)) np->register_size = NV_PCI_REGSZ_VER3; else if (id->driver_data & DEV_HAS_STATISTICS_V1) np->register_size = NV_PCI_REGSZ_VER2; @@ -6085,35 +6108,35 @@ static struct pci_device_id pci_tbl[] = { }, { /* MCP77 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_32), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP77 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_33), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP77 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_34), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP77 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_35), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_36), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_37), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_38), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_39), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, {0,}, }; -- GitLab From 06941931d8697dd939d7cac379565b1b2de1415f Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Wed, 6 Aug 2008 12:12:18 -0400 Subject: [PATCH 0937/1024] forcedeth: add jumbo frame support for mcp79 This patch adds jumbo frame support for MCP79 chipsets. Signed-off-by: Ayaz Abdulla Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 3749a997089..d9495d2fd80 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -6124,19 +6124,19 @@ static struct pci_device_id pci_tbl[] = { }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_36), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_37), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_38), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, { /* MCP79 Ethernet Controller */ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_39), - .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, + .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE, }, {0,}, }; -- GitLab From 9a33e883564c2db8e1b3b645de4579a98ac084d2 Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Wed, 6 Aug 2008 12:12:34 -0400 Subject: [PATCH 0938/1024] forcedeth: add tx pause limit This patch adds support for limiting the number of tx pause frames to a default of 8. Previously, hardware would send out continuous stream of pause frames. Signed-off-by: Ayaz Abdulla Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index d9495d2fd80..053971e5fc9 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -249,6 +249,8 @@ enum { #define NVREG_TX_PAUSEFRAME_ENABLE_V1 0x01800010 #define NVREG_TX_PAUSEFRAME_ENABLE_V2 0x056003f0 #define NVREG_TX_PAUSEFRAME_ENABLE_V3 0x09f00880 + NvRegTxPauseFrameLimit = 0x174, +#define NVREG_TX_PAUSEFRAMELIMIT_ENABLE 0x00010000 NvRegMIIStatus = 0x180, #define NVREG_MIISTAT_ERROR 0x0001 #define NVREG_MIISTAT_LINKCHANGE 0x0008 @@ -3076,8 +3078,11 @@ static void nv_update_pause(struct net_device *dev, u32 pause_flags) u32 pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V1; if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V2) pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V2; - if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V3) + if (np->driver_data & DEV_HAS_PAUSEFRAME_TX_V3) { pause_enable = NVREG_TX_PAUSEFRAME_ENABLE_V3; + /* limit the number of tx pause frames to a default of 8 */ + writel(readl(base + NvRegTxPauseFrameLimit)|NVREG_TX_PAUSEFRAMELIMIT_ENABLE, base + NvRegTxPauseFrameLimit); + } writel(pause_enable, base + NvRegTxPauseFrame); writel(regmisc|NVREG_MISC1_PAUSE_TX, base + NvRegMisc1); np->pause_flags |= NV_PAUSEFRAME_TX_ENABLE; -- GitLab From 5b1c29b4365d2eaf05eb81899cb1ca847dfe026e Mon Sep 17 00:00:00 2001 From: Li Yang Date: Wed, 6 Aug 2008 15:08:50 +0800 Subject: [PATCH 0939/1024] net/fs_enet: remove redundant messages for performance Currently when we do a packet flood to the Ethernet port, the console reports error every time when a packet is dropped. This is too redundant and cost performance. Remove message for this type of event. Signed-off-by: Li Yang Signed-off-by: Jeff Garzik --- drivers/net/fs_enet/mac-fcc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c index 0a97fc2d97e..1c7ef812a8e 100644 --- a/drivers/net/fs_enet/mac-fcc.c +++ b/drivers/net/fs_enet/mac-fcc.c @@ -126,7 +126,7 @@ out: #define FCC_NAPI_RX_EVENT_MSK (FCC_ENET_RXF | FCC_ENET_RXB) #define FCC_RX_EVENT (FCC_ENET_RXF) #define FCC_TX_EVENT (FCC_ENET_TXB) -#define FCC_ERR_EVENT_MSK (FCC_ENET_TXE | FCC_ENET_BSY) +#define FCC_ERR_EVENT_MSK (FCC_ENET_TXE) static int setup_data(struct net_device *dev) { -- GitLab From 4ad7a018cf4ac3cbad661c28c0f783ee0a6e3bf6 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 4 Aug 2008 11:59:36 +0300 Subject: [PATCH 0940/1024] remove bogus CONFIG_GFAR_NAPI's The commit that made the CONFIG_GFAR_NAPI code unconditional was included at the same time as a new CONFIG_GFAR_NAPI user, resulting in these bugus #ifdef's. Reported-by: Robert P. J. Day Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik --- drivers/net/gianfar.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index b8394cf134e..ca6cf6ecb37 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -414,9 +414,7 @@ static int gfar_suspend(struct platform_device *pdev, pm_message_t state) spin_unlock(&priv->rxlock); spin_unlock_irqrestore(&priv->txlock, flags); -#ifdef CONFIG_GFAR_NAPI napi_disable(&priv->napi); -#endif if (magic_packet) { /* Enable interrupt on Magic Packet */ @@ -469,9 +467,7 @@ static int gfar_resume(struct platform_device *pdev) netif_device_attach(dev); -#ifdef CONFIG_GFAR_NAPI napi_enable(&priv->napi); -#endif return 0; } -- GitLab From 24a7a45511f89959b4f1dc60a66260d09777901a Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Fri, 1 Aug 2008 03:14:55 -0700 Subject: [PATCH 0941/1024] netxen: fix link status, link speed For NX3031, the phy is managed by firmware, so driver should avoid setting any phy registers. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic_ethtool.c | 33 +++++++++++++++++------- drivers/net/netxen/netxen_nic_hdr.h | 7 +++++ drivers/net/netxen/netxen_nic_hw.c | 17 +++++++++--- drivers/net/netxen/netxen_nic_main.c | 19 ++++++-------- drivers/net/netxen/netxen_nic_niu.c | 12 +++++++++ drivers/net/netxen/netxen_nic_phan_reg.h | 4 +-- 6 files changed, 66 insertions(+), 26 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c index 48ee06b6f4e..f9b933efa36 100644 --- a/drivers/net/netxen/netxen_nic_ethtool.c +++ b/drivers/net/netxen/netxen_nic_ethtool.c @@ -140,18 +140,33 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) if (netif_running(dev)) { ecmd->speed = adapter->link_speed; ecmd->duplex = adapter->link_duplex; - } else - return -EIO; /* link absent */ + ecmd->autoneg = adapter->link_autoneg; + } + } else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) { - ecmd->supported = (SUPPORTED_TP | - SUPPORTED_1000baseT_Full | - SUPPORTED_10000baseT_Full); - ecmd->advertising = (ADVERTISED_TP | - ADVERTISED_1000baseT_Full | - ADVERTISED_10000baseT_Full); + u32 val; + + adapter->hw_read_wx(adapter, NETXEN_PORT_MODE_ADDR, &val, 4); + if (val == NETXEN_PORT_MODE_802_3_AP) { + ecmd->supported = SUPPORTED_1000baseT_Full; + ecmd->advertising = ADVERTISED_1000baseT_Full; + } else { + ecmd->supported = SUPPORTED_10000baseT_Full; + ecmd->advertising = ADVERTISED_10000baseT_Full; + } + ecmd->port = PORT_TP; - ecmd->speed = SPEED_10000; + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) { + u16 pcifn = adapter->ahw.pci_func; + + adapter->hw_read_wx(adapter, + P3_LINK_SPEED_REG(pcifn), &val, 4); + ecmd->speed = P3_LINK_SPEED_MHZ * + P3_LINK_SPEED_VAL(pcifn, val); + } else + ecmd->speed = SPEED_10000; + ecmd->duplex = DUPLEX_FULL; ecmd->autoneg = AUTONEG_DISABLE; } else diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h index 3ce13e451aa..ccf6d70064b 100644 --- a/drivers/net/netxen/netxen_nic_hdr.h +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -724,6 +724,13 @@ enum { #define XG_LINK_STATE_P3(pcifn,val) \ (((val) >> ((pcifn) * 4)) & XG_LINK_STATE_P3_MASK) +#define P3_LINK_SPEED_MHZ 100 +#define P3_LINK_SPEED_MASK 0xff +#define P3_LINK_SPEED_REG(pcifn) \ + (CRB_PF_LINK_SPEED_1 + (((pcifn) / 4) * 4)) +#define P3_LINK_SPEED_VAL(pcifn, reg) \ + (((reg) >> (8 * ((pcifn) & 0x3))) & P3_LINK_SPEED_MASK) + #define NETXEN_CAM_RAM_BASE (NETXEN_CRB_CAM + 0x02000) #define NETXEN_CAM_RAM(reg) (NETXEN_CAM_RAM_BASE + (reg)) #define NETXEN_FW_VERSION_MAJOR (NETXEN_CAM_RAM(0x150)) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 96a3bc6426e..008a6e7ffa0 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -2074,12 +2074,22 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter) __u32 status; __u32 autoneg; __u32 mode; + __u32 port_mode; netxen_nic_read_w0(adapter, NETXEN_NIU_MODE, &mode); if (netxen_get_niu_enable_ge(mode)) { /* Gb 10/100/1000 Mbps mode */ + + adapter->hw_read_wx(adapter, + NETXEN_PORT_MODE_ADDR, &port_mode, 4); + if (port_mode == NETXEN_PORT_MODE_802_3_AP) { + adapter->link_speed = SPEED_1000; + adapter->link_duplex = DUPLEX_FULL; + adapter->link_autoneg = AUTONEG_DISABLE; + return; + } + if (adapter->phy_read - && adapter-> - phy_read(adapter, + && adapter->phy_read(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS, &status) == 0) { if (netxen_get_phy_link(status)) { @@ -2109,8 +2119,7 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter) break; } if (adapter->phy_read - && adapter-> - phy_read(adapter, + && adapter->phy_read(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR_AUTONEG, &autoneg) != 0) adapter->link_autoneg = autoneg; diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 91d209a8f6c..7b8688e7bfa 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1410,20 +1410,17 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter) port = adapter->physical_port; - if (adapter->ahw.board_type == NETXEN_NIC_GBE) { - val = adapter->pci_read_normalize(adapter, CRB_XG_STATE); - linkup = (val >> port) & 1; + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) { + val = adapter->pci_read_normalize(adapter, CRB_XG_STATE_P3); + val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val); + linkup = (val == XG_LINK_UP_P3); } else { - if (adapter->fw_major < 4) { - val = adapter->pci_read_normalize(adapter, - CRB_XG_STATE); + val = adapter->pci_read_normalize(adapter, CRB_XG_STATE); + if (adapter->ahw.board_type == NETXEN_NIC_GBE) + linkup = (val >> port) & 1; + else { val = (val >> port*8) & 0xff; linkup = (val == XG_LINK_UP); - } else { - val = adapter->pci_read_normalize(adapter, - CRB_XG_STATE_P3); - val = XG_LINK_STATE_P3(adapter->ahw.pci_func, val); - linkup = (val == XG_LINK_UP_P3); } } diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c index 4cb8f4a1cf4..c9493e2df20 100644 --- a/drivers/net/netxen/netxen_nic_niu.c +++ b/drivers/net/netxen/netxen_nic_niu.c @@ -610,6 +610,9 @@ int netxen_niu_macaddr_set(struct netxen_adapter *adapter, int i; DECLARE_MAC_BUF(mac); + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) + return 0; + for (i = 0; i < 10; i++) { temp[0] = temp[1] = 0; memcpy(temp + 2, addr, 2); @@ -727,6 +730,9 @@ int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter) __u32 mac_cfg0; u32 port = adapter->physical_port; + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) + return 0; + if (port > NETXEN_NIU_MAX_GBE_PORTS) return -EINVAL; mac_cfg0 = 0; @@ -743,6 +749,9 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter) __u32 mac_cfg; u32 port = adapter->physical_port; + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) + return 0; + if (port > NETXEN_NIU_MAX_XG_PORTS) return -EINVAL; @@ -819,6 +828,9 @@ int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter, u8 temp[4]; u32 val; + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) + return 0; + if ((phy < 0) || (phy > NETXEN_NIU_MAX_XG_PORTS)) return -EIO; diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h index 3bfa51b62a4..83e5ee57bfe 100644 --- a/drivers/net/netxen/netxen_nic_phan_reg.h +++ b/drivers/net/netxen/netxen_nic_phan_reg.h @@ -95,8 +95,8 @@ #define CRB_HOST_STS_PROD NETXEN_NIC_REG(0xdc) #define CRB_HOST_STS_CONS NETXEN_NIC_REG(0xe0) #define CRB_PEG_CMD_PROD NETXEN_NIC_REG(0xe4) -#define CRB_PEG_CMD_CONS NETXEN_NIC_REG(0xe8) -#define CRB_HOST_BUFFER_PROD NETXEN_NIC_REG(0xec) +#define CRB_PF_LINK_SPEED_1 NETXEN_NIC_REG(0xe8) +#define CRB_PF_LINK_SPEED_2 NETXEN_NIC_REG(0xec) #define CRB_HOST_BUFFER_CONS NETXEN_NIC_REG(0xf0) #define CRB_JUMBO_BUFFER_PROD NETXEN_NIC_REG(0xf4) #define CRB_JUMBO_BUFFER_CONS NETXEN_NIC_REG(0xf8) -- GitLab From a70f939338cae650f177ae79562ec44659788bb4 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Fri, 1 Aug 2008 03:14:56 -0700 Subject: [PATCH 0942/1024] netxen: add new board types Add couple of new board configurations based on NX3031 chip. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic.h | 6 +++++- drivers/net/netxen/netxen_nic_ethtool.c | 2 ++ drivers/net/netxen/netxen_nic_hw.c | 3 +++ drivers/net/netxen/netxen_nic_main.c | 6 ++++++ 4 files changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index 8e736614407..07a59dc83db 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -508,6 +508,8 @@ typedef enum { NETXEN_BRDTYPE_P3_10000_BASE_T = 0x0027, NETXEN_BRDTYPE_P3_XG_LOM = 0x0028, NETXEN_BRDTYPE_P3_4_GB_MM = 0x0029, + NETXEN_BRDTYPE_P3_10G_SFP_CT = 0x002a, + NETXEN_BRDTYPE_P3_10G_SFP_QT = 0x002b, NETXEN_BRDTYPE_P3_10G_CX4 = 0x0031, NETXEN_BRDTYPE_P3_10G_XFP = 0x0032 @@ -1502,7 +1504,9 @@ static const struct netxen_brdinfo netxen_boards[] = { {NETXEN_BRDTYPE_P3_10G_SFP_PLUS, 2, "Dual XGb SFP+ LP"}, {NETXEN_BRDTYPE_P3_10000_BASE_T, 1, "XGB 10G BaseT LP"}, {NETXEN_BRDTYPE_P3_XG_LOM, 2, "Dual XGb LOM"}, - {NETXEN_BRDTYPE_P3_4_GB_MM, 4, "Quad GB - March Madness"}, + {NETXEN_BRDTYPE_P3_4_GB_MM, 4, "NX3031 Gigabit Ethernet"}, + {NETXEN_BRDTYPE_P3_10G_SFP_CT, 2, "NX3031 10 Gigabit Ethernet"}, + {NETXEN_BRDTYPE_P3_10G_SFP_QT, 2, "Quanta Dual XGb SFP+"}, {NETXEN_BRDTYPE_P3_10G_CX4, 2, "Reference Dual CX4 Option"}, {NETXEN_BRDTYPE_P3_10G_XFP, 1, "Reference Single XFP Option"} }; diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c index f9b933efa36..4ad3e0844b9 100644 --- a/drivers/net/netxen/netxen_nic_ethtool.c +++ b/drivers/net/netxen/netxen_nic_ethtool.c @@ -207,6 +207,8 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) break; case NETXEN_BRDTYPE_P2_SB31_10G: case NETXEN_BRDTYPE_P3_10G_SFP_PLUS: + case NETXEN_BRDTYPE_P3_10G_SFP_CT: + case NETXEN_BRDTYPE_P3_10G_SFP_QT: case NETXEN_BRDTYPE_P3_10G_XFP: ecmd->supported |= SUPPORTED_FIBRE; ecmd->advertising |= ADVERTISED_FIBRE; diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 008a6e7ffa0..d0c6935881e 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -2016,6 +2016,8 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter) case NETXEN_BRDTYPE_P3_10G_CX4_LP: case NETXEN_BRDTYPE_P3_IMEZ: case NETXEN_BRDTYPE_P3_10G_SFP_PLUS: + case NETXEN_BRDTYPE_P3_10G_SFP_CT: + case NETXEN_BRDTYPE_P3_10G_SFP_QT: case NETXEN_BRDTYPE_P3_10G_XFP: case NETXEN_BRDTYPE_P3_10000_BASE_T: @@ -2034,6 +2036,7 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter) default: printk("%s: Unknown(%x)\n", netxen_nic_driver_name, boardinfo->board_type); + rv = -ENODEV; break; } diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 7b8688e7bfa..153b391917e 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -284,6 +284,8 @@ static void netxen_check_options(struct netxen_adapter *adapter) case NETXEN_BRDTYPE_P3_10G_CX4_LP: case NETXEN_BRDTYPE_P3_IMEZ: case NETXEN_BRDTYPE_P3_10G_SFP_PLUS: + case NETXEN_BRDTYPE_P3_10G_SFP_QT: + case NETXEN_BRDTYPE_P3_10G_SFP_CT: case NETXEN_BRDTYPE_P3_10G_XFP: case NETXEN_BRDTYPE_P3_10000_BASE_T: adapter->msix_supported = !!use_msi_x; @@ -301,6 +303,10 @@ static void netxen_check_options(struct netxen_adapter *adapter) case NETXEN_BRDTYPE_P3_REF_QG: case NETXEN_BRDTYPE_P3_4_GB: case NETXEN_BRDTYPE_P3_4_GB_MM: + adapter->msix_supported = 0; + adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G; + break; + case NETXEN_BRDTYPE_P2_SB35_4G: case NETXEN_BRDTYPE_P2_SB31_2G: adapter->msix_supported = 0; -- GitLab From ea771bd51c3b9b9683860515d93e6155a345fa2f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 6 Aug 2008 23:11:08 -0700 Subject: [PATCH 0943/1024] sparc64: Use kernel/uid16.c helpers instead of own copy. Noticed by Adrian Bunk. Signed-off-by: David S. Miller --- arch/sparc64/kernel/sys_sparc32.c | 176 ------------------------------ arch/sparc64/kernel/systbls.S | 20 ++-- 2 files changed, 10 insertions(+), 186 deletions(-) diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c index 97b77fb5c50..3d118531baf 100644 --- a/arch/sparc64/kernel/sys_sparc32.c +++ b/arch/sparc64/kernel/sys_sparc32.c @@ -58,182 +58,6 @@ #include #include -asmlinkage long sys32_chown16(const char __user * filename, u16 user, u16 group) -{ - return sys_chown(filename, low2highuid(user), low2highgid(group)); -} - -asmlinkage long sys32_lchown16(const char __user * filename, u16 user, u16 group) -{ - return sys_lchown(filename, low2highuid(user), low2highgid(group)); -} - -asmlinkage long sys32_fchown16(unsigned int fd, u16 user, u16 group) -{ - return sys_fchown(fd, low2highuid(user), low2highgid(group)); -} - -asmlinkage long sys32_setregid16(u16 rgid, u16 egid) -{ - return sys_setregid(low2highgid(rgid), low2highgid(egid)); -} - -asmlinkage long sys32_setgid16(u16 gid) -{ - return sys_setgid((gid_t)gid); -} - -asmlinkage long sys32_setreuid16(u16 ruid, u16 euid) -{ - return sys_setreuid(low2highuid(ruid), low2highuid(euid)); -} - -asmlinkage long sys32_setuid16(u16 uid) -{ - return sys_setuid((uid_t)uid); -} - -asmlinkage long sys32_setresuid16(u16 ruid, u16 euid, u16 suid) -{ - return sys_setresuid(low2highuid(ruid), low2highuid(euid), - low2highuid(suid)); -} - -asmlinkage long sys32_getresuid16(u16 __user *ruid, u16 __user *euid, u16 __user *suid) -{ - int retval; - - if (!(retval = put_user(high2lowuid(current->uid), ruid)) && - !(retval = put_user(high2lowuid(current->euid), euid))) - retval = put_user(high2lowuid(current->suid), suid); - - return retval; -} - -asmlinkage long sys32_setresgid16(u16 rgid, u16 egid, u16 sgid) -{ - return sys_setresgid(low2highgid(rgid), low2highgid(egid), - low2highgid(sgid)); -} - -asmlinkage long sys32_getresgid16(u16 __user *rgid, u16 __user *egid, u16 __user *sgid) -{ - int retval; - - if (!(retval = put_user(high2lowgid(current->gid), rgid)) && - !(retval = put_user(high2lowgid(current->egid), egid))) - retval = put_user(high2lowgid(current->sgid), sgid); - - return retval; -} - -asmlinkage long sys32_setfsuid16(u16 uid) -{ - return sys_setfsuid((uid_t)uid); -} - -asmlinkage long sys32_setfsgid16(u16 gid) -{ - return sys_setfsgid((gid_t)gid); -} - -static int groups16_to_user(u16 __user *grouplist, struct group_info *group_info) -{ - int i; - u16 group; - - for (i = 0; i < group_info->ngroups; i++) { - group = (u16)GROUP_AT(group_info, i); - if (put_user(group, grouplist+i)) - return -EFAULT; - } - - return 0; -} - -static int groups16_from_user(struct group_info *group_info, u16 __user *grouplist) -{ - int i; - u16 group; - - for (i = 0; i < group_info->ngroups; i++) { - if (get_user(group, grouplist+i)) - return -EFAULT; - GROUP_AT(group_info, i) = (gid_t)group; - } - - return 0; -} - -asmlinkage long sys32_getgroups16(int gidsetsize, u16 __user *grouplist) -{ - int i; - - if (gidsetsize < 0) - return -EINVAL; - - get_group_info(current->group_info); - i = current->group_info->ngroups; - if (gidsetsize) { - if (i > gidsetsize) { - i = -EINVAL; - goto out; - } - if (groups16_to_user(grouplist, current->group_info)) { - i = -EFAULT; - goto out; - } - } -out: - put_group_info(current->group_info); - return i; -} - -asmlinkage long sys32_setgroups16(int gidsetsize, u16 __user *grouplist) -{ - struct group_info *group_info; - int retval; - - if (!capable(CAP_SETGID)) - return -EPERM; - if ((unsigned)gidsetsize > NGROUPS_MAX) - return -EINVAL; - - group_info = groups_alloc(gidsetsize); - if (!group_info) - return -ENOMEM; - retval = groups16_from_user(group_info, grouplist); - if (retval) { - put_group_info(group_info); - return retval; - } - - retval = set_current_groups(group_info); - put_group_info(group_info); - - return retval; -} - -asmlinkage long sys32_getuid16(void) -{ - return high2lowuid(current->uid); -} - -asmlinkage long sys32_geteuid16(void) -{ - return high2lowuid(current->euid); -} - -asmlinkage long sys32_getgid16(void) -{ - return high2lowgid(current->gid); -} - -asmlinkage long sys32_getegid16(void) -{ - return high2lowgid(current->egid); -} - /* 32-bit timeval and related flotsam. */ static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i) diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S index 1095bf4c510..0fdbf3ba956 100644 --- a/arch/sparc64/kernel/systbls.S +++ b/arch/sparc64/kernel/systbls.S @@ -20,21 +20,21 @@ sys_call_table32: /*0*/ .word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write /*5*/ .word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link -/*10*/ .word sys_unlink, sunos_execv, sys_chdir, sys32_chown16, sys32_mknod -/*15*/ .word sys_chmod, sys32_lchown16, sparc_brk, sys32_perfctr, sys32_lseek -/*20*/ .word sys_getpid, sys_capget, sys_capset, sys32_setuid16, sys32_getuid16 +/*10*/ .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod +/*15*/ .word sys_chmod, sys_lchown16, sparc_brk, sys32_perfctr, sys32_lseek +/*20*/ .word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16 /*25*/ .word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys32_pause /*30*/ .word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice .word sys_chown, sys_sync, sys32_kill, compat_sys_newstat, sys32_sendfile /*40*/ .word compat_sys_newlstat, sys_dup, sys_pipe, compat_sys_times, sys_getuid - .word sys32_umount, sys32_setgid16, sys32_getgid16, sys32_signal, sys32_geteuid16 -/*50*/ .word sys32_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl + .word sys32_umount, sys_setgid16, sys_getgid16, sys32_signal, sys_geteuid16 +/*50*/ .word sys_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl .word sys32_reboot, sys32_mmap2, sys_symlink, sys32_readlink, sys32_execve /*60*/ .word sys32_umask, sys_chroot, compat_sys_newfstat, compat_sys_fstat64, sys_getpagesize .word sys32_msync, sys_vfork, sys32_pread64, sys32_pwrite64, sys_geteuid /*70*/ .word sys_getegid, sys_mmap, sys_setreuid, sys_munmap, sys_mprotect - .word sys_madvise, sys_vhangup, sys32_truncate64, sys_mincore, sys32_getgroups16 -/*80*/ .word sys32_setgroups16, sys_getpgrp, sys32_setgroups, sys32_setitimer, sys32_ftruncate64 + .word sys_madvise, sys_vhangup, sys32_truncate64, sys_mincore, sys_getgroups16 +/*80*/ .word sys_setgroups16, sys_getpgrp, sys32_setgroups, sys32_setitimer, sys32_ftruncate64 .word sys32_swapon, sys32_getitimer, sys_setuid, sys32_sethostname, sys_setgid /*90*/ .word sys_dup2, sys_setfsuid, compat_sys_fcntl, sys32_select, sys_setfsgid .word sys_fsync, sys32_setpriority, sys_nis_syscall, sys_nis_syscall, sys_nis_syscall @@ -42,8 +42,8 @@ sys_call_table32: .word compat_sys_rt_sigtimedwait, sys32_rt_sigqueueinfo, compat_sys_rt_sigsuspend, sys_setresuid, sys_getresuid /*110*/ .word sys_setresgid, sys_getresgid, sys_setregid, sys_nis_syscall, sys_nis_syscall .word sys32_getgroups, sys32_gettimeofday, sys32_getrusage, sys_nis_syscall, sys_getcwd -/*120*/ .word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys32_fchown16, sys_fchmod - .word sys_nis_syscall, sys32_setreuid16, sys32_setregid16, sys_rename, sys_truncate +/*120*/ .word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys_fchown16, sys_fchmod + .word sys_nis_syscall, sys_setreuid16, sys_setregid16, sys_rename, sys_truncate /*130*/ .word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall .word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64 /*140*/ .word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit @@ -63,7 +63,7 @@ sys_call_table32: /*210*/ .word sys32_fadvise64_64, sys32_tgkill, sys32_waitpid, sys_swapoff, compat_sys_sysinfo .word compat_sys_ipc, sys32_sigreturn, sys_clone, sys32_ioprio_get, compat_sys_adjtimex /*220*/ .word sys32_sigprocmask, sys_ni_syscall, sys32_delete_module, sys_ni_syscall, sys32_getpgid - .word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys32_setfsuid16, sys32_setfsgid16 + .word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys_setfsuid16, sys_setfsgid16 /*230*/ .word sys32_select, compat_sys_time, sys32_splice, compat_sys_stime, compat_sys_statfs64 .word compat_sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys32_mlockall /*240*/ .word sys_munlockall, sys32_sched_setparam, sys32_sched_getparam, sys32_sched_setscheduler, sys32_sched_getscheduler -- GitLab From d71e1be8edd355668a12a18660da03ae993dd9df Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Fri, 1 Aug 2008 03:14:57 -0700 Subject: [PATCH 0944/1024] netxen: fix legacy interrupts Fix legacy interrupt mode for NX3031 chips, read pci interrupt state in hardware to guard against spurious interrupt. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic_hdr.h | 3 ++ drivers/net/netxen/netxen_nic_main.c | 48 ++++++++++++++++++---------- 2 files changed, 34 insertions(+), 17 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h index ccf6d70064b..e8e8d73f6ed 100644 --- a/drivers/net/netxen/netxen_nic_hdr.h +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -843,9 +843,11 @@ enum { #define PCIE_SETUP_FUNCTION (0x12040) #define PCIE_SETUP_FUNCTION2 (0x12048) +#define PCIE_MISCCFG_RC (0x1206c) #define PCIE_TGT_SPLIT_CHICKEN (0x12080) #define PCIE_CHICKEN3 (0x120c8) +#define ISR_INT_STATE_REG (NETXEN_PCIX_PS_REG(PCIE_MISCCFG_RC)) #define PCIE_MAX_MASTER_SPLIT (0x14048) #define NETXEN_PORT_MODE_NONE 0 @@ -861,6 +863,7 @@ enum { #define NETXEN_CAM_RAM_DMA_WATCHDOG_CTRL (0x14) #define ISR_MSI_INT_TRIGGER(FUNC) (NETXEN_PCIX_PS_REG(PCIX_MSI_F(FUNC))) +#define ISR_LEGACY_INT_TRIGGERED(VAL) (((VAL) & 0x300) == 0x200) /* * PCI Interrupt Vector Values. diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 153b391917e..320d010678c 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -166,7 +166,8 @@ static void netxen_nic_disable_int(struct netxen_adapter *adapter) if (!NETXEN_IS_MSI_FAMILY(adapter)) { do { adapter->pci_write_immediate(adapter, - ISR_INT_TARGET_STATUS, 0xffffffff); + adapter->legacy_intr.tgt_status_reg, + 0xffffffff); mask = adapter->pci_read_immediate(adapter, ISR_INT_VECTOR); if (!(mask & 0x80)) @@ -175,7 +176,7 @@ static void netxen_nic_disable_int(struct netxen_adapter *adapter) } while (--retries); if (!retries) { - printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n", + printk(KERN_NOTICE "%s: Failed to disable interrupt\n", netxen_nic_driver_name); } } else { @@ -190,8 +191,6 @@ static void netxen_nic_enable_int(struct netxen_adapter *adapter) { u32 mask; - DPRINTK(1, INFO, "Entered ISR Enable \n"); - if (adapter->intr_scheme != -1 && adapter->intr_scheme != INTR_SCHEME_PERPORT) { switch (adapter->ahw.board_type) { @@ -213,16 +212,13 @@ static void netxen_nic_enable_int(struct netxen_adapter *adapter) if (!NETXEN_IS_MSI_FAMILY(adapter)) { mask = 0xbff; - if (adapter->intr_scheme != -1 && - adapter->intr_scheme != INTR_SCHEME_PERPORT) { + if (adapter->intr_scheme == INTR_SCHEME_PERPORT) + adapter->pci_write_immediate(adapter, + adapter->legacy_intr.tgt_mask_reg, mask); + else adapter->pci_write_normalize(adapter, CRB_INT_VECTOR, 0); - } - adapter->pci_write_immediate(adapter, - ISR_INT_TARGET_MASK, mask); } - - DPRINTK(1, INFO, "Done with enable Int\n"); } static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id) @@ -1538,15 +1534,33 @@ static irqreturn_t netxen_intr(int irq, void *data) struct netxen_adapter *adapter = data; u32 our_int = 0; - our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR); - /* not our interrupt */ - if ((our_int & (0x80 << adapter->portnum)) == 0) + u32 status = 0; + + status = adapter->pci_read_immediate(adapter, ISR_INT_VECTOR); + + if (!(status & adapter->legacy_intr.int_vec_bit)) return IRQ_NONE; - if (adapter->intr_scheme == INTR_SCHEME_PERPORT) { - /* claim interrupt */ - adapter->pci_write_normalize(adapter, CRB_INT_VECTOR, + if (adapter->ahw.revision_id >= NX_P3_B1) { + /* check interrupt state machine, to be sure */ + status = adapter->pci_read_immediate(adapter, + ISR_INT_STATE_REG); + if (!ISR_LEGACY_INT_TRIGGERED(status)) + return IRQ_NONE; + + } else if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) { + + our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR); + /* not our interrupt */ + if ((our_int & (0x80 << adapter->portnum)) == 0) + return IRQ_NONE; + + if (adapter->intr_scheme == INTR_SCHEME_PERPORT) { + /* claim interrupt */ + adapter->pci_write_normalize(adapter, + CRB_INT_VECTOR, our_int & ~((u32)(0x80 << adapter->portnum))); + } } netxen_handle_int(adapter); -- GitLab From 83821a078a1617e120d76954f455204cec78fe9d Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Fri, 1 Aug 2008 03:14:58 -0700 Subject: [PATCH 0945/1024] netxen: fix cmd ring init Initialize producer and consumer indices during netdev open(), only for old firmware/chip. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic_main.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 320d010678c..311a4bdfa85 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -702,13 +702,10 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->status &= ~NETXEN_NETDEV_STATUS; adapter->rx_csum = 1; adapter->mc_enabled = 0; - if (NX_IS_REVISION_P3(revision_id)) { + if (NX_IS_REVISION_P3(revision_id)) adapter->max_mc_count = 38; - adapter->max_rds_rings = 2; - } else { + else adapter->max_mc_count = 16; - adapter->max_rds_rings = 3; - } netdev->open = netxen_nic_open; netdev->stop = netxen_nic_close; @@ -781,10 +778,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (adapter->portnum == 0) first_driver = 1; } - adapter->crb_addr_cmd_producer = crb_cmd_producer[adapter->portnum]; - adapter->crb_addr_cmd_consumer = crb_cmd_consumer[adapter->portnum]; - netxen_nic_update_cmd_producer(adapter, 0); - netxen_nic_update_cmd_consumer(adapter, 0); if (first_driver) { first_boot = adapter->pci_read_normalize(adapter, @@ -1055,6 +1048,11 @@ static int netxen_nic_open(struct net_device *netdev) return -EIO; } + if (adapter->fw_major < 4) + adapter->max_rds_rings = 3; + else + adapter->max_rds_rings = 2; + err = netxen_alloc_sw_resources(adapter); if (err) { printk(KERN_ERR "%s: Error in setting sw resources\n", @@ -1076,10 +1074,10 @@ static int netxen_nic_open(struct net_device *netdev) crb_cmd_producer[adapter->portnum]; adapter->crb_addr_cmd_consumer = crb_cmd_consumer[adapter->portnum]; - } - netxen_nic_update_cmd_producer(adapter, 0); - netxen_nic_update_cmd_consumer(adapter, 0); + netxen_nic_update_cmd_producer(adapter, 0); + netxen_nic_update_cmd_consumer(adapter, 0); + } for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) { for (ring = 0; ring < adapter->max_rds_rings; ring++) -- GitLab From 9ad27643f3a054dff9211bb9938f2323907c2ffe Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Fri, 1 Aug 2008 03:14:59 -0700 Subject: [PATCH 0946/1024] netxen: fix promisc mode, mtu setting For NX3031, multicast filtering, promisc mode, and max frame size setting is handled by firmware, driver needs to send request to enable/disable it. For old chip revisions / firmware, driver still sets it directly. Added function pointer to set mtu according to chip revision. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic.h | 35 ++++++++++++- drivers/net/netxen/netxen_nic_ctx.c | 9 ++-- drivers/net/netxen/netxen_nic_hw.c | 77 +++++++++++++++------------- drivers/net/netxen/netxen_nic_hw.h | 13 ++--- drivers/net/netxen/netxen_nic_init.c | 5 ++ drivers/net/netxen/netxen_nic_main.c | 4 +- drivers/net/netxen/netxen_nic_niu.c | 4 +- 7 files changed, 94 insertions(+), 53 deletions(-) diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index 07a59dc83db..93a7b9b668d 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -1172,6 +1172,36 @@ typedef struct { nx_nic_intr_coalesce_data_t irq; } nx_nic_intr_coalesce_t; +#define NX_HOST_REQUEST 0x13 +#define NX_NIC_REQUEST 0x14 + +#define NX_MAC_EVENT 0x1 + +enum { + NX_NIC_H2C_OPCODE_START = 0, + NX_NIC_H2C_OPCODE_CONFIG_RSS, + NX_NIC_H2C_OPCODE_CONFIG_RSS_TBL, + NX_NIC_H2C_OPCODE_CONFIG_INTR_COALESCE, + NX_NIC_H2C_OPCODE_CONFIG_LED, + NX_NIC_H2C_OPCODE_CONFIG_PROMISCUOUS, + NX_NIC_H2C_OPCODE_CONFIG_L2_MAC, + NX_NIC_H2C_OPCODE_LRO_REQUEST, + NX_NIC_H2C_OPCODE_GET_SNMP_STATS, + NX_NIC_H2C_OPCODE_PROXY_START_REQUEST, + NX_NIC_H2C_OPCODE_PROXY_STOP_REQUEST, + NX_NIC_H2C_OPCODE_PROXY_SET_MTU, + NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE, + NX_H2P_OPCODE_GET_FINGER_PRINT_REQUEST, + NX_H2P_OPCODE_INSTALL_LICENSE_REQUEST, + NX_H2P_OPCODE_GET_LICENSE_CAPABILITY_REQUEST, + NX_NIC_H2C_OPCODE_GET_NET_STATS, + NX_NIC_H2C_OPCODE_LAST +}; + +#define VPORT_MISS_MODE_DROP 0 /* drop all unmatched */ +#define VPORT_MISS_MODE_ACCEPT_ALL 1 /* accept all packets */ +#define VPORT_MISS_MODE_ACCEPT_MULTI 2 /* accept unmatched multicast */ + typedef struct { u64 qhdr; u64 req_hdr; @@ -1290,7 +1320,7 @@ struct netxen_adapter { int (*disable_phy_interrupts) (struct netxen_adapter *); int (*macaddr_set) (struct netxen_adapter *, netxen_ethernet_macaddr_t); int (*set_mtu) (struct netxen_adapter *, int); - int (*set_promisc) (struct netxen_adapter *, netxen_niu_prom_mode_t); + int (*set_promisc) (struct netxen_adapter *, u32); int (*phy_read) (struct netxen_adapter *, long reg, u32 *); int (*phy_write) (struct netxen_adapter *, long reg, u32 val); int (*init_port) (struct netxen_adapter *, int); @@ -1467,9 +1497,10 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter); u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max); void netxen_p2_nic_set_multi(struct net_device *netdev); void netxen_p3_nic_set_multi(struct net_device *netdev); +int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32); int netxen_config_intr_coalesce(struct netxen_adapter *adapter); -u32 nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu); +int nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu); int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu); int netxen_nic_set_mac(struct net_device *netdev, void *p); diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c index 64babc59e69..64b51643c62 100644 --- a/drivers/net/netxen/netxen_nic_ctx.c +++ b/drivers/net/netxen/netxen_nic_ctx.c @@ -145,8 +145,8 @@ netxen_issue_cmd(struct netxen_adapter *adapter, return rcode; } -u32 -nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu) +int +nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, int mtu) { u32 rcode = NX_RCODE_SUCCESS; struct netxen_recv_context *recv_ctx = &adapter->recv_ctx[0]; @@ -160,7 +160,10 @@ nx_fw_cmd_set_mtu(struct netxen_adapter *adapter, u32 mtu) 0, NX_CDRP_CMD_SET_MTU); - return rcode; + if (rcode != NX_RCODE_SUCCESS) + return -EIO; + + return 0; } static int diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index d0c6935881e..4259f3fb899 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -285,14 +285,7 @@ static unsigned crb_hub_agt[64] = #define ADDR_IN_RANGE(addr, low, high) \ (((addr) <= (high)) && ((addr) >= (low))) -#define NETXEN_MAX_MTU 8000 + NETXEN_ENET_HEADER_SIZE + NETXEN_ETH_FCS_SIZE -#define NETXEN_MIN_MTU 64 -#define NETXEN_ETH_FCS_SIZE 4 -#define NETXEN_ENET_HEADER_SIZE 14 #define NETXEN_WINDOW_ONE 0x2000000 /*CRB Window: bit 25 of CRB address */ -#define NETXEN_FIRMWARE_LEN ((16 * 1024) / 4) -#define NETXEN_NIU_HDRSIZE (0x1 << 6) -#define NETXEN_NIU_TLRSIZE (0x1 << 5) #define NETXEN_NIC_ZERO_PAUSE_ADDR 0ULL #define NETXEN_NIC_UNIT_PAUSE_ADDR 0x200ULL @@ -541,9 +534,6 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter, return 0; } -#define NIC_REQUEST 0x14 -#define NETXEN_MAC_EVENT 0x1 - static int nx_p3_sre_macaddr_change(struct net_device *dev, u8 *addr, unsigned op) { @@ -553,8 +543,8 @@ static int nx_p3_sre_macaddr_change(struct net_device *dev, int rv; memset(&req, 0, sizeof(nx_nic_req_t)); - req.qhdr |= (NIC_REQUEST << 23); - req.req_hdr |= NETXEN_MAC_EVENT; + req.qhdr |= (NX_NIC_REQUEST << 23); + req.req_hdr |= NX_MAC_EVENT; req.req_hdr |= ((u64)adapter->portnum << 16); mac_req.op = op; memcpy(&mac_req.mac_addr, addr, 6); @@ -575,31 +565,35 @@ void netxen_p3_nic_set_multi(struct net_device *netdev) nx_mac_list_t *cur, *next, *del_list, *add_list = NULL; struct dev_mc_list *mc_ptr; u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - - adapter->set_promisc(adapter, NETXEN_NIU_PROMISC_MODE); - - /* - * Programming mac addresses will automaticly enabling L2 filtering. - * HW will replace timestamp with L2 conid when L2 filtering is - * enabled. This causes problem for LSA. Do not enabling L2 filtering - * until that problem is fixed. - */ - if ((netdev->flags & IFF_PROMISC) || - (netdev->mc_count > adapter->max_mc_count)) - return; + u32 mode = VPORT_MISS_MODE_DROP; del_list = adapter->mac_list; adapter->mac_list = NULL; nx_p3_nic_add_mac(adapter, netdev->dev_addr, &add_list, &del_list); + nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list); + + if (netdev->flags & IFF_PROMISC) { + mode = VPORT_MISS_MODE_ACCEPT_ALL; + goto send_fw_cmd; + } + + if ((netdev->flags & IFF_ALLMULTI) || + (netdev->mc_count > adapter->max_mc_count)) { + mode = VPORT_MISS_MODE_ACCEPT_MULTI; + goto send_fw_cmd; + } + if (netdev->mc_count > 0) { - nx_p3_nic_add_mac(adapter, bcast_addr, &add_list, &del_list); for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) { nx_p3_nic_add_mac(adapter, mc_ptr->dmi_addr, &add_list, &del_list); } } + +send_fw_cmd: + adapter->set_promisc(adapter, mode); for (cur = del_list; cur;) { nx_p3_sre_macaddr_change(netdev, cur->mac_addr, NETXEN_MAC_DEL); next = cur->next; @@ -615,6 +609,21 @@ void netxen_p3_nic_set_multi(struct net_device *netdev) } } +int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode) +{ + nx_nic_req_t req; + + memset(&req, 0, sizeof(nx_nic_req_t)); + + req.qhdr |= (NX_HOST_REQUEST << 23); + req.req_hdr |= NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE; + req.req_hdr |= ((u64)adapter->portnum << 16); + req.words[0] = cpu_to_le64(mode); + + return netxen_send_cmd_descs(adapter, + (struct cmd_desc_type0 *)&req, 1); +} + #define NETXEN_CONFIG_INTR_COALESCE 3 /* @@ -627,7 +636,7 @@ int netxen_config_intr_coalesce(struct netxen_adapter *adapter) memset(&req, 0, sizeof(nx_nic_req_t)); - req.qhdr |= (NIC_REQUEST << 23); + req.qhdr |= (NX_NIC_REQUEST << 23); req.req_hdr |= NETXEN_CONFIG_INTR_COALESCE; req.req_hdr |= ((u64)adapter->portnum << 16); @@ -653,6 +662,7 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu) { struct netxen_adapter *adapter = netdev_priv(netdev); int max_mtu; + int rc = 0; if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) max_mtu = P3_MAX_MTU; @@ -666,16 +676,12 @@ int netxen_nic_change_mtu(struct net_device *netdev, int mtu) } if (adapter->set_mtu) - adapter->set_mtu(adapter, mtu); - netdev->mtu = mtu; + rc = adapter->set_mtu(adapter, mtu); - mtu += MTU_FUDGE_FACTOR; - if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) - nx_fw_cmd_set_mtu(adapter, mtu); - else if (adapter->set_mtu) - adapter->set_mtu(adapter, mtu); + if (!rc) + netdev->mtu = mtu; - return 0; + return rc; } int netxen_is_flash_supported(struct netxen_adapter *adapter) @@ -2047,6 +2053,7 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter) int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu) { + new_mtu += MTU_FUDGE_FACTOR; netxen_nic_write_w0(adapter, NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port), new_mtu); @@ -2055,7 +2062,7 @@ int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu) int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu) { - new_mtu += NETXEN_NIU_HDRSIZE + NETXEN_NIU_TLRSIZE; + new_mtu += MTU_FUDGE_FACTOR; if (adapter->physical_port == 0) netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE, new_mtu); diff --git a/drivers/net/netxen/netxen_nic_hw.h b/drivers/net/netxen/netxen_nic_hw.h index b8e0030f03d..aae737dc77a 100644 --- a/drivers/net/netxen/netxen_nic_hw.h +++ b/drivers/net/netxen/netxen_nic_hw.h @@ -419,12 +419,9 @@ typedef enum { #define netxen_get_niu_enable_ge(config_word) \ _netxen_crb_get_bit(config_word, 1) -/* Promiscous mode options (GbE mode only) */ -typedef enum { - NETXEN_NIU_PROMISC_MODE = 0, - NETXEN_NIU_NON_PROMISC_MODE, - NETXEN_NIU_ALLMULTI_MODE -} netxen_niu_prom_mode_t; +#define NETXEN_NIU_NON_PROMISC_MODE 0 +#define NETXEN_NIU_PROMISC_MODE 1 +#define NETXEN_NIU_ALLMULTI_MODE 2 /* * NIU GB Drop CRC Register @@ -471,9 +468,9 @@ typedef enum { /* Set promiscuous mode for a GbE interface */ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, - netxen_niu_prom_mode_t mode); + u32 mode); int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter, - netxen_niu_prom_mode_t mode); + u32 mode); /* set the MAC address for a given MAC */ int netxen_niu_macaddr_set(struct netxen_adapter *adapter, diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 01ab31b34a8..519fc860e17 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -364,6 +364,11 @@ void netxen_initialize_adapter_ops(struct netxen_adapter *adapter) default: break; } + + if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) { + adapter->set_mtu = nx_fw_cmd_set_mtu; + adapter->set_promisc = netxen_p3_nic_set_promisc; + } } /* diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 311a4bdfa85..7615c715e66 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1113,9 +1113,7 @@ static int netxen_nic_open(struct net_device *netdev) netxen_nic_set_link_parameters(adapter); netdev->set_multicast_list(netdev); - if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) - nx_fw_cmd_set_mtu(adapter, netdev->mtu); - else + if (adapter->set_mtu) adapter->set_mtu(adapter, netdev->mtu); mod_timer(&adapter->watchdog_timer, jiffies); diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c index c9493e2df20..27f07f6a45b 100644 --- a/drivers/net/netxen/netxen_nic_niu.c +++ b/drivers/net/netxen/netxen_nic_niu.c @@ -764,7 +764,7 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter) /* Set promiscuous mode for a GbE interface */ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, - netxen_niu_prom_mode_t mode) + u32 mode) { __u32 reg; u32 port = adapter->physical_port; @@ -906,7 +906,7 @@ int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter, #endif /* 0 */ int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter, - netxen_niu_prom_mode_t mode) + u32 mode) { __u32 reg; u32 port = adapter->physical_port; -- GitLab From 49ef26eb8dc76531b197b591072c403f0e6ec598 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Thu, 31 Jul 2008 13:46:04 -0700 Subject: [PATCH 0947/1024] qla3xxx: fix: Remove unused set_multicast function. This device is one side of a two-function adapter (NIC and iSCSI). Promiscuous mode setting/clearing is not allowed from the NIC side. Signed-off-by: Ron Mercer Signed-off-by: Jeff Garzik --- drivers/net/qla3xxx.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index e82b37bbd6c..763169f9299 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -3730,14 +3730,6 @@ static int ql3xxx_open(struct net_device *ndev) return (ql_adapter_up(qdev)); } -static void ql3xxx_set_multicast_list(struct net_device *ndev) -{ - /* - * We are manually parsing the list in the net_device structure. - */ - return; -} - static int ql3xxx_set_mac_address(struct net_device *ndev, void *p) { struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev); @@ -4007,7 +3999,11 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev, ndev->open = ql3xxx_open; ndev->hard_start_xmit = ql3xxx_send; ndev->stop = ql3xxx_close; - ndev->set_multicast_list = ql3xxx_set_multicast_list; + /* ndev->set_multicast_list + * This device is one side of a two-function adapter + * (NIC and iSCSI). Promiscuous mode setting/clearing is + * not allowed from the NIC side. + */ SET_ETHTOOL_OPS(ndev, &ql3xxx_ethtool_ops); ndev->set_mac_address = ql3xxx_set_mac_address; ndev->tx_timeout = ql3xxx_tx_timeout; -- GitLab From eb115b00992ed21fb8734cbee45d46d37f4010ce Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Thu, 31 Jul 2008 13:46:05 -0700 Subject: [PATCH 0948/1024] qla3xxx: fix: Fix IFF_MULTICAST setting. The driver was erroneously clearing this bit though the hardware supports multicast. Signed-off-by: Ron Mercer Signed-off-by: Jeff Garzik --- drivers/net/qla3xxx.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 763169f9299..51aa027a509 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -4036,9 +4036,6 @@ static int __devinit ql3xxx_probe(struct pci_dev *pdev, ndev->tx_queue_len = NUM_REQ_Q_ENTRIES; - /* Turn off support for multicasting */ - ndev->flags &= ~IFF_MULTICAST; - /* Record PCI bus information. */ ql_get_board_info(qdev); -- GitLab From 6bc0ed97d5ddb49248cfb76827d72557f4bd0aae Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Thu, 31 Jul 2008 13:46:06 -0700 Subject: [PATCH 0949/1024] qla3xxx: cleanup: Remove some unused defined constants in the header file. Signed-off-by: Ron Mercer Signed-off-by: Jeff Garzik --- drivers/net/qla3xxx.h | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h index 58a086fddec..e0655f99661 100644 --- a/drivers/net/qla3xxx.h +++ b/drivers/net/qla3xxx.h @@ -14,19 +14,11 @@ #define OPCODE_OB_MAC_IOCB_FN0 0x01 #define OPCODE_OB_MAC_IOCB_FN2 0x21 -#define OPCODE_OB_TCP_IOCB_FN0 0x03 -#define OPCODE_OB_TCP_IOCB_FN2 0x23 -#define OPCODE_UPDATE_NCB_IOCB_FN0 0x00 -#define OPCODE_UPDATE_NCB_IOCB_FN2 0x20 -#define OPCODE_UPDATE_NCB_IOCB 0xF0 #define OPCODE_IB_MAC_IOCB 0xF9 #define OPCODE_IB_3032_MAC_IOCB 0x09 #define OPCODE_IB_IP_IOCB 0xFA #define OPCODE_IB_3032_IP_IOCB 0x0A -#define OPCODE_IB_TCP_IOCB 0xFB -#define OPCODE_DUMP_PROTO_IOCB 0xFE -#define OPCODE_BUFFER_ALERT_IOCB 0xFB #define OPCODE_FUNC_ID_MASK 0x30 #define OUTBOUND_MAC_IOCB 0x01 /* plus function bits */ -- GitLab From 4ea0d6e5b8dc6c46c1a981e971fa0b78bfe6e5d3 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Thu, 31 Jul 2008 13:46:07 -0700 Subject: [PATCH 0950/1024] qla3xxx: cleanup: Remove some unused structure definitions and structure elements. Signed-off-by: Ron Mercer Signed-off-by: Jeff Garzik --- drivers/net/qla3xxx.c | 4 -- drivers/net/qla3xxx.h | 97 ------------------------------------------- 2 files changed, 101 deletions(-) diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 51aa027a509..7d0e83f4215 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -3495,8 +3495,6 @@ static void ql_set_mac_info(struct ql3_adapter *qdev) case ISP_CONTROL_FN0_NET: qdev->mac_index = 0; qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number; - qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number; - qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number; qdev->mb_bit_mask = FN0_MA_BITS_MASK; qdev->PHYAddr = PORT0_PHY_ADDRESS; if (port_status & PORT_STATUS_SM0) @@ -3508,8 +3506,6 @@ static void ql_set_mac_info(struct ql3_adapter *qdev) case ISP_CONTROL_FN1_NET: qdev->mac_index = 1; qdev->mac_ob_opcode = OUTBOUND_MAC_IOCB | func_number; - qdev->tcp_ob_opcode = OUTBOUND_TCP_IOCB | func_number; - qdev->update_ob_opcode = UPDATE_NCB_IOCB | func_number; qdev->mb_bit_mask = FN1_MA_BITS_MASK; qdev->PHYAddr = PORT1_PHY_ADDRESS; if (port_status & PORT_STATUS_SM1) diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h index e0655f99661..7113e71b15a 100644 --- a/drivers/net/qla3xxx.h +++ b/drivers/net/qla3xxx.h @@ -22,8 +22,6 @@ #define OPCODE_FUNC_ID_MASK 0x30 #define OUTBOUND_MAC_IOCB 0x01 /* plus function bits */ -#define OUTBOUND_TCP_IOCB 0x03 /* plus function bits */ -#define UPDATE_NCB_IOCB 0x00 /* plus function bits */ #define FN0_MA_BITS_MASK 0x00 #define FN1_MA_BITS_MASK 0x80 @@ -151,75 +149,6 @@ struct ob_ip_iocb_rsp { __le32 reserved2; }; -struct ob_tcp_iocb_req { - u8 opcode; - - u8 flags0; -#define OB_TCP_IOCB_REQ_P 0x80 -#define OB_TCP_IOCB_REQ_CI 0x20 -#define OB_TCP_IOCB_REQ_H 0x10 -#define OB_TCP_IOCB_REQ_LN 0x08 -#define OB_TCP_IOCB_REQ_K 0x04 -#define OB_TCP_IOCB_REQ_D 0x02 -#define OB_TCP_IOCB_REQ_I 0x01 - - u8 flags1; -#define OB_TCP_IOCB_REQ_OSM 0x40 -#define OB_TCP_IOCB_REQ_URG 0x20 -#define OB_TCP_IOCB_REQ_ACK 0x10 -#define OB_TCP_IOCB_REQ_PSH 0x08 -#define OB_TCP_IOCB_REQ_RST 0x04 -#define OB_TCP_IOCB_REQ_SYN 0x02 -#define OB_TCP_IOCB_REQ_FIN 0x01 - - u8 options_len; -#define OB_TCP_IOCB_REQ_OMASK 0xF0 -#define OB_TCP_IOCB_REQ_SHIFT 4 - - __le32 transaction_id; - __le32 data_len; - __le32 hncb_ptr_low; - __le32 hncb_ptr_high; - __le32 buf_addr0_low; - __le32 buf_addr0_high; - __le32 buf_0_len; - __le32 buf_addr1_low; - __le32 buf_addr1_high; - __le32 buf_1_len; - __le32 buf_addr2_low; - __le32 buf_addr2_high; - __le32 buf_2_len; - __le32 time_stamp; - __le32 reserved1; -}; - -struct ob_tcp_iocb_rsp { - u8 opcode; - - u8 flags0; -#define OB_TCP_IOCB_RSP_C 0x20 -#define OB_TCP_IOCB_RSP_H 0x10 -#define OB_TCP_IOCB_RSP_LN 0x08 -#define OB_TCP_IOCB_RSP_K 0x04 -#define OB_TCP_IOCB_RSP_D 0x02 -#define OB_TCP_IOCB_RSP_I 0x01 - - u8 flags1; -#define OB_TCP_IOCB_RSP_E 0x10 -#define OB_TCP_IOCB_RSP_W 0x08 -#define OB_TCP_IOCB_RSP_P 0x04 -#define OB_TCP_IOCB_RSP_T 0x02 -#define OB_TCP_IOCB_RSP_F 0x01 - - u8 state; -#define OB_TCP_IOCB_RSP_SMASK 0xF0 -#define OB_TCP_IOCB_RSP_SHIFT 4 - - __le32 transaction_id; - __le32 local_ncb_ptr; - __le32 reserved0; -}; - struct ib_ip_iocb_rsp { u8 opcode; #define IB_IP_IOCB_RSP_3032_V 0x80 @@ -248,25 +177,6 @@ struct ib_ip_iocb_rsp { __le32 ial_high; }; -struct ib_tcp_iocb_rsp { - u8 opcode; - u8 flags; -#define IB_TCP_IOCB_RSP_P 0x80 -#define IB_TCP_IOCB_RSP_T 0x40 -#define IB_TCP_IOCB_RSP_D 0x20 -#define IB_TCP_IOCB_RSP_N 0x10 -#define IB_TCP_IOCB_RSP_IP 0x03 -#define IB_TCP_FLAG_MASK 0xf0 -#define IB_TCP_FLAG_IOCB_SYN 0x00 - -#define TCP_IB_RSP_FLAGS(x) (x->flags & ~IB_TCP_FLAG_MASK) - - __le16 length; - __le32 hncb_ref_num; - __le32 ial_low; - __le32 ial_high; -}; - struct net_rsp_iocb { u8 opcode; u8 flags; @@ -1258,20 +1168,13 @@ struct ql3_adapter { u32 small_buf_release_cnt; u32 small_buf_total_size; - /* ISR related, saves status for DPC. */ - u32 control_status; - struct eeprom_data nvram_data; - struct timer_list ioctl_timer; u32 port_link_state; - u32 last_rsp_offset; /* 4022 specific */ u32 mac_index; /* Driver's MAC number can be 0 or 1 for first and second networking functions respectively */ u32 PHYAddr; /* Address of PHY 0x1e00 Port 0 and 0x1f00 Port 1 */ u32 mac_ob_opcode; /* Opcode to use on mac transmission */ - u32 tcp_ob_opcode; /* Opcode to use on tcp transmission */ - u32 update_ob_opcode; /* Opcode to use for updating NCB */ u32 mb_bit_mask; /* MA Bits mask to use on transmission */ u32 numPorts; struct workqueue_struct *workqueue; -- GitLab From b08c42b283141d1a79fb748d258dcd1da8baa32e Mon Sep 17 00:00:00 2001 From: root Date: Thu, 31 Jul 2008 13:46:08 -0700 Subject: [PATCH 0951/1024] qla3xxx: driver version change. Signed-off-by: Ron Mercer Signed-off-by: Jeff Garzik --- drivers/net/qla3xxx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 7d0e83f4215..3cdd07c45b6 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -38,7 +38,7 @@ #define DRV_NAME "qla3xxx" #define DRV_STRING "QLogic ISP3XXX Network Driver" -#define DRV_VERSION "v2.03.00-k4" +#define DRV_VERSION "v2.03.00-k5" #define PFX DRV_NAME " " static const char ql3xxx_driver_name[] = DRV_NAME; -- GitLab From 0b1ab1b8a4f663a34c23f31d796fd08283b6077a Mon Sep 17 00:00:00 2001 From: Eduardo Habkost Date: Thu, 31 Jul 2008 17:36:55 -0300 Subject: [PATCH 0952/1024] xen-netfront: use netif_start_queue() on xennet_open() xen-netfront never called netif_start_queue() and was was waking the queue on xennet_open(), triggering the BUG_ON() on __netif_schedule(). Signed-off-by: Eduardo Habkost Signed-off-by: Jeff Garzik --- drivers/net/xen-netfront.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 902bbe78821..c749bdba214 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -329,7 +329,7 @@ static int xennet_open(struct net_device *dev) } spin_unlock_bh(&np->rx_lock); - xennet_maybe_wake_tx(dev); + netif_start_queue(dev); return 0; } -- GitLab From d91d4bb9db4a7b2a78accff3560bfd42988c56e4 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 31 Jul 2008 01:14:24 +0200 Subject: [PATCH 0953/1024] METH: fix MAC address setup Setup of the mac filter lost the upper 16bit of the mac address. This bug got unconvered by a patch, which fixed the promiscous handling. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Jeff Garzik --- drivers/net/meth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/meth.c b/drivers/net/meth.c index 4cb364e67dc..0a97c26df6a 100644 --- a/drivers/net/meth.c +++ b/drivers/net/meth.c @@ -100,7 +100,7 @@ static inline void load_eaddr(struct net_device *dev) DPRINTK("Loading MAC Address: %s\n", print_mac(mac, dev->dev_addr)); macaddr = 0; for (i = 0; i < 6; i++) - macaddr |= dev->dev_addr[i] << ((5 - i) * 8); + macaddr |= (u64)dev->dev_addr[i] << ((5 - i) * 8); mace->eth.mac_addr = macaddr; } -- GitLab From 71557a37adb5df17631c493b3b7d912938c720b2 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Wed, 6 Aug 2008 19:49:00 -0400 Subject: [PATCH 0954/1024] [netdrvr] sh_eth: Add SH7619 support Add support SH7619 Internal ethernet controler. Signed-off-by: Yoshinori Sato Signed-off-by: Jeff Garzik --- arch/sh/include/asm/sh_eth.h | 11 ++++++ drivers/net/Kconfig | 5 +-- drivers/net/sh_eth.c | 69 ++++++++++++++++++++++++++---------- drivers/net/sh_eth.h | 22 +++++++++--- 4 files changed, 82 insertions(+), 25 deletions(-) create mode 100644 arch/sh/include/asm/sh_eth.h diff --git a/arch/sh/include/asm/sh_eth.h b/arch/sh/include/asm/sh_eth.h new file mode 100644 index 00000000000..bb832584f3c --- /dev/null +++ b/arch/sh/include/asm/sh_eth.h @@ -0,0 +1,11 @@ +#ifndef __ASM_SH_ETH_H__ +#define __ASM_SH_ETH_H__ + +enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN}; + +struct sh_eth_plat_data { + int phy; + int edmac_endian; +}; + +#endif diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8a03875ec87..4b4cb2bf4f1 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -510,14 +510,15 @@ config STNIC config SH_ETH tristate "Renesas SuperH Ethernet support" depends on SUPERH && \ - (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763) + (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7763 || \ + CPU_SUBTYPE_SH7619) select CRC32 select MII select MDIO_BITBANG select PHYLIB help Renesas SuperH Ethernet device driver. - This driver support SH7710, SH7712 and SH7763. + This driver support SH7710, SH7712, SH7763 and SH7619. config SUNLANCE tristate "Sun LANCE support" diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 6a06b9503e4..25e62cf58d3 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -34,6 +34,29 @@ #include "sh_eth.h" +/* CPU <-> EDMAC endian convert */ +static inline __u32 cpu_to_edmac(struct sh_eth_private *mdp, u32 x) +{ + switch (mdp->edmac_endian) { + case EDMAC_LITTLE_ENDIAN: + return cpu_to_le32(x); + case EDMAC_BIG_ENDIAN: + return cpu_to_be32(x); + } + return x; +} + +static inline __u32 edmac_to_cpu(struct sh_eth_private *mdp, u32 x) +{ + switch (mdp->edmac_endian) { + case EDMAC_LITTLE_ENDIAN: + return le32_to_cpu(x); + case EDMAC_BIG_ENDIAN: + return be32_to_cpu(x); + } + return x; +} + /* * Program the hardware MAC address from dev->dev_addr. */ @@ -240,7 +263,7 @@ static void sh_eth_ring_format(struct net_device *ndev) /* RX descriptor */ rxdesc = &mdp->rx_ring[i]; rxdesc->addr = (u32)skb->data & ~0x3UL; - rxdesc->status = cpu_to_le32(RD_RACT | RD_RFP); + rxdesc->status = cpu_to_edmac(mdp, RD_RACT | RD_RFP); /* The size of the buffer is 16 byte boundary. */ rxdesc->buffer_length = (mdp->rx_buf_sz + 16) & ~0x0F; @@ -262,7 +285,7 @@ static void sh_eth_ring_format(struct net_device *ndev) mdp->dirty_rx = (u32) (i - RX_RING_SIZE); /* Mark the last entry as wrapping the ring. */ - rxdesc->status |= cpu_to_le32(RD_RDEL); + rxdesc->status |= cpu_to_edmac(mdp, RD_RDEL); memset(mdp->tx_ring, 0, tx_ringsize); @@ -270,10 +293,10 @@ static void sh_eth_ring_format(struct net_device *ndev) for (i = 0; i < TX_RING_SIZE; i++) { mdp->tx_skbuff[i] = NULL; txdesc = &mdp->tx_ring[i]; - txdesc->status = cpu_to_le32(TD_TFP); + txdesc->status = cpu_to_edmac(mdp, TD_TFP); txdesc->buffer_length = 0; if (i == 0) { - /* Rx descriptor address set */ + /* Tx descriptor address set */ ctrl_outl((u32)txdesc, ioaddr + TDLAR); #if defined(CONFIG_CPU_SUBTYPE_SH7763) ctrl_outl((u32)txdesc, ioaddr + TDFAR); @@ -281,13 +304,13 @@ static void sh_eth_ring_format(struct net_device *ndev) } } - /* Rx descriptor address set */ + /* Tx descriptor address set */ #if defined(CONFIG_CPU_SUBTYPE_SH7763) ctrl_outl((u32)txdesc, ioaddr + TDFXR); ctrl_outl(0x1, ioaddr + TDFFR); #endif - txdesc->status |= cpu_to_le32(TD_TDLE); + txdesc->status |= cpu_to_edmac(mdp, TD_TDLE); } /* Get skb and descriptor buffer */ @@ -455,7 +478,7 @@ static int sh_eth_txfree(struct net_device *ndev) for (; mdp->cur_tx - mdp->dirty_tx > 0; mdp->dirty_tx++) { entry = mdp->dirty_tx % TX_RING_SIZE; txdesc = &mdp->tx_ring[entry]; - if (txdesc->status & cpu_to_le32(TD_TACT)) + if (txdesc->status & cpu_to_edmac(mdp, TD_TACT)) break; /* Free the original skb. */ if (mdp->tx_skbuff[entry]) { @@ -463,9 +486,9 @@ static int sh_eth_txfree(struct net_device *ndev) mdp->tx_skbuff[entry] = NULL; freeNum++; } - txdesc->status = cpu_to_le32(TD_TFP); + txdesc->status = cpu_to_edmac(mdp, TD_TFP); if (entry >= TX_RING_SIZE - 1) - txdesc->status |= cpu_to_le32(TD_TDLE); + txdesc->status |= cpu_to_edmac(mdp, TD_TDLE); mdp->stats.tx_packets++; mdp->stats.tx_bytes += txdesc->buffer_length; @@ -486,8 +509,8 @@ static int sh_eth_rx(struct net_device *ndev) u32 desc_status, reserve = 0; rxdesc = &mdp->rx_ring[entry]; - while (!(rxdesc->status & cpu_to_le32(RD_RACT))) { - desc_status = le32_to_cpu(rxdesc->status); + while (!(rxdesc->status & cpu_to_edmac(mdp, RD_RACT))) { + desc_status = edmac_to_cpu(mdp, rxdesc->status); pkt_len = rxdesc->frame_length; if (--boguscnt < 0) @@ -522,7 +545,7 @@ static int sh_eth_rx(struct net_device *ndev) mdp->stats.rx_packets++; mdp->stats.rx_bytes += pkt_len; } - rxdesc->status |= cpu_to_le32(RD_RACT); + rxdesc->status |= cpu_to_edmac(mdp, RD_RACT); entry = (++mdp->cur_rx) % RX_RING_SIZE; } @@ -552,10 +575,10 @@ static int sh_eth_rx(struct net_device *ndev) } if (entry >= RX_RING_SIZE - 1) rxdesc->status |= - cpu_to_le32(RD_RACT | RD_RFP | RD_RDEL); + cpu_to_edmac(mdp, RD_RACT | RD_RFP | RD_RDEL); else rxdesc->status |= - cpu_to_le32(RD_RACT | RD_RFP); + cpu_to_edmac(mdp, RD_RACT | RD_RFP); } /* Restart Rx engine if stopped. */ @@ -931,9 +954,9 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev) txdesc->buffer_length = skb->len; if (entry >= TX_RING_SIZE - 1) - txdesc->status |= cpu_to_le32(TD_TACT | TD_TDLE); + txdesc->status |= cpu_to_edmac(mdp, TD_TACT | TD_TDLE); else - txdesc->status |= cpu_to_le32(TD_TACT); + txdesc->status |= cpu_to_edmac(mdp, TD_TACT); mdp->cur_tx++; @@ -1159,6 +1182,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev) struct resource *res; struct net_device *ndev = NULL; struct sh_eth_private *mdp; + struct sh_eth_plat_data *pd; /* get base addr */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1196,8 +1220,11 @@ static int sh_eth_drv_probe(struct platform_device *pdev) mdp = netdev_priv(ndev); spin_lock_init(&mdp->lock); + pd = (struct sh_eth_plat_data *)(pdev->dev.platform_data); /* get PHY ID */ - mdp->phy_id = (int)pdev->dev.platform_data; + mdp->phy_id = pd->phy; + /* EDMAC endian */ + mdp->edmac_endian = pd->edmac_endian; /* set function */ ndev->open = sh_eth_open; @@ -1217,12 +1244,16 @@ static int sh_eth_drv_probe(struct platform_device *pdev) /* First device only init */ if (!devno) { +#if defined(ARSTR) /* reset device */ ctrl_outl(ARSTR_ARSTR, ARSTR); mdelay(1); +#endif +#if defined(SH_TSU_ADDR) /* TSU init (Init only)*/ sh_eth_tsu_init(SH_TSU_ADDR); +#endif } /* network device register */ @@ -1240,8 +1271,8 @@ static int sh_eth_drv_probe(struct platform_device *pdev) ndev->name, CARDNAME, (u32) ndev->base_addr); for (i = 0; i < 5; i++) - printk(KERN_INFO "%02X:", ndev->dev_addr[i]); - printk(KERN_INFO "%02X, IRQ %d.\n", ndev->dev_addr[i], ndev->irq); + printk("%02X:", ndev->dev_addr[i]); + printk("%02X, IRQ %d.\n", ndev->dev_addr[i], ndev->irq); platform_set_drvdata(pdev, ndev); diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h index 45ad1b09ca5..73bc7181cc1 100644 --- a/drivers/net/sh_eth.h +++ b/drivers/net/sh_eth.h @@ -30,6 +30,8 @@ #include #include +#include + #define CARDNAME "sh-eth" #define TX_TIMEOUT (5*HZ) #define TX_RING_SIZE 64 /* Tx ring size */ @@ -143,10 +145,11 @@ #else /* CONFIG_CPU_SUBTYPE_SH7763 */ # define RX_OFFSET 2 /* skb offset */ +#ifndef CONFIG_CPU_SUBTYPE_SH7619 /* Chip base address */ # define SH_TSU_ADDR 0xA7000804 # define ARSTR 0xA7000800 - +#endif /* Chip Registers */ /* E-DMAC */ # define EDMR 0x0000 @@ -384,7 +387,11 @@ enum FCFTR_BIT { FCFTR_RFD1 = 0x00000002, FCFTR_RFD0 = 0x00000001, }; #define FIFO_F_D_RFF (FCFTR_RFF2|FCFTR_RFF1|FCFTR_RFF0) +#ifndef CONFIG_CPU_SUBTYPE_SH7619 #define FIFO_F_D_RFD (FCFTR_RFD2|FCFTR_RFD1|FCFTR_RFD0) +#else +#define FIFO_F_D_RFD (FCFTR_RFD0) +#endif /* Transfer descriptor bit */ enum TD_STS_BIT { @@ -414,8 +421,10 @@ enum FELIC_MODE_BIT { #ifdef CONFIG_CPU_SUBTYPE_SH7763 #define ECMR_CHG_DM (ECMR_TRCCM | ECMR_RZPF | ECMR_ZPF |\ ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT) +#elif CONFIG_CPU_SUBTYPE_SH7619 +#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF) #else -#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR ECMR_RXF | ECMR_TXF | ECMR_MCT) +#define ECMR_CHG_DM (ECMR_ZPF | ECMR_PFR | ECMR_RXF | ECMR_TXF | ECMR_MCT) #endif /* ECSR */ @@ -485,7 +494,11 @@ enum RPADIR_BIT { /* FDR */ enum FIFO_SIZE_BIT { +#ifndef CONFIG_CPU_SUBTYPE_SH7619 FIFO_SIZE_T = 0x00000700, FIFO_SIZE_R = 0x00000007, +#else + FIFO_SIZE_T = 0x00000100, FIFO_SIZE_R = 0x00000001, +#endif }; enum phy_offsets { PHY_CTRL = 0, PHY_STAT = 1, PHY_IDT1 = 2, PHY_IDT2 = 3, @@ -601,7 +614,7 @@ struct sh_eth_txdesc { #endif u32 addr; /* TD2 */ u32 pad1; /* padding data */ -}; +} __attribute__((aligned(2), packed)); /* * The sh ether Rx buffer descriptors. @@ -618,7 +631,7 @@ struct sh_eth_rxdesc { #endif u32 addr; /* RD2 */ u32 pad0; /* padding data */ -}; +} __attribute__((aligned(2), packed)); struct sh_eth_private { dma_addr_t rx_desc_dma; @@ -633,6 +646,7 @@ struct sh_eth_private { u32 cur_rx, dirty_rx; /* Producer/consumer ring indices */ u32 cur_tx, dirty_tx; u32 rx_buf_sz; /* Based on MTU+slack. */ + int edmac_endian; /* MII transceiver section. */ u32 phy_id; /* PHY ID */ struct mii_bus *mii_bus; /* MDIO bus control */ -- GitLab From 057b61afca098d3ad3d9e8d15914bc9f9315e425 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Sat, 2 Aug 2008 15:55:11 -0300 Subject: [PATCH 0955/1024] drivers/net: Remove 'return' of void function NS8390p_init() We don't need this into a void function. Signed-off-by: Gustavo F. Padovan Signed-off-by: Jeff Garzik --- drivers/net/8390p.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/8390p.c b/drivers/net/8390p.c index 71f19884c4b..fd46f6cd431 100644 --- a/drivers/net/8390p.c +++ b/drivers/net/8390p.c @@ -39,7 +39,7 @@ struct net_device *__alloc_eip_netdev(int size) void NS8390p_init(struct net_device *dev, int startp) { - return __NS8390_init(dev, startp); + __NS8390_init(dev, startp); } EXPORT_SYMBOL(eip_open); -- GitLab From caa1687c0123705182dc0388304a4c9b78fcf41c Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Sat, 2 Aug 2008 15:55:12 -0300 Subject: [PATCH 0956/1024] drivers/net: coding styles fixes to drivers/net/8390p.c Fix all errors and warnings reported by checkpatch.pl Signed-off-by: Gustavo F. Padovan Signed-off-by: Jeff Garzik --- drivers/net/8390p.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/net/8390p.c b/drivers/net/8390p.c index fd46f6cd431..4c6eea4611a 100644 --- a/drivers/net/8390p.c +++ b/drivers/net/8390p.c @@ -4,9 +4,9 @@ static const char version[] = "8390p.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; #define ei_inb(_p) inb(_p) -#define ei_outb(_v,_p) outb(_v,_p) +#define ei_outb(_v, _p) outb(_v, _p) #define ei_inb_p(_p) inb_p(_p) -#define ei_outb_p(_v,_p) outb_p(_v,_p) +#define ei_outb_p(_v, _p) outb_p(_v, _p) #include "lib8390.c" @@ -14,42 +14,39 @@ int eip_open(struct net_device *dev) { return __ei_open(dev); } +EXPORT_SYMBOL(eip_open); int eip_close(struct net_device *dev) { return __ei_close(dev); } +EXPORT_SYMBOL(eip_close); irqreturn_t eip_interrupt(int irq, void *dev_id) { return __ei_interrupt(irq, dev_id); } +EXPORT_SYMBOL(eip_interrupt); #ifdef CONFIG_NET_POLL_CONTROLLER void eip_poll(struct net_device *dev) { __ei_poll(dev); } +EXPORT_SYMBOL(eip_poll); #endif struct net_device *__alloc_eip_netdev(int size) { return ____alloc_ei_netdev(size); } +EXPORT_SYMBOL(__alloc_eip_netdev); void NS8390p_init(struct net_device *dev, int startp) { __NS8390_init(dev, startp); } - -EXPORT_SYMBOL(eip_open); -EXPORT_SYMBOL(eip_close); -EXPORT_SYMBOL(eip_interrupt); -#ifdef CONFIG_NET_POLL_CONTROLLER -EXPORT_SYMBOL(eip_poll); -#endif EXPORT_SYMBOL(NS8390p_init); -EXPORT_SYMBOL(__alloc_eip_netdev); #if defined(MODULE) -- GitLab From 11795aa4f89cf68e7aafc8a606feee14c97a12e5 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Sat, 2 Aug 2008 15:55:13 -0300 Subject: [PATCH 0957/1024] drivers/net: coding styles fixes to drivers/net/8390.c Fix all errors and warnings reported by checkpatch.pl Signed-off-by: Gustavo F. Padovan Signed-off-by: Jeff Garzik --- drivers/net/8390.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/net/8390.c b/drivers/net/8390.c index dc5d2584bd0..f72a2e87d56 100644 --- a/drivers/net/8390.c +++ b/drivers/net/8390.c @@ -9,42 +9,39 @@ int ei_open(struct net_device *dev) { return __ei_open(dev); } +EXPORT_SYMBOL(ei_open); int ei_close(struct net_device *dev) { return __ei_close(dev); } +EXPORT_SYMBOL(ei_close); irqreturn_t ei_interrupt(int irq, void *dev_id) { return __ei_interrupt(irq, dev_id); } +EXPORT_SYMBOL(ei_interrupt); #ifdef CONFIG_NET_POLL_CONTROLLER void ei_poll(struct net_device *dev) { __ei_poll(dev); } +EXPORT_SYMBOL(ei_poll); #endif struct net_device *__alloc_ei_netdev(int size) { return ____alloc_ei_netdev(size); } +EXPORT_SYMBOL(__alloc_ei_netdev); void NS8390_init(struct net_device *dev, int startp) { __NS8390_init(dev, startp); } - -EXPORT_SYMBOL(ei_open); -EXPORT_SYMBOL(ei_close); -EXPORT_SYMBOL(ei_interrupt); -#ifdef CONFIG_NET_POLL_CONTROLLER -EXPORT_SYMBOL(ei_poll); -#endif EXPORT_SYMBOL(NS8390_init); -EXPORT_SYMBOL(__alloc_ei_netdev); #if defined(MODULE) -- GitLab From 5608784fdf417467cbb2ccfb1129500464416f79 Mon Sep 17 00:00:00 2001 From: Eugene Teo Date: Wed, 30 Jul 2008 12:38:59 -0700 Subject: [PATCH 0958/1024] hamradio: add missing sanity check to tty operation Add missing sanity check to tty operation. Acked-by: Alan Cox Signed-off-by: Eugene Teo Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/hamradio/mkiss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 3249df5e0f1..b8e25c4624d 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -548,7 +548,7 @@ static int ax_xmit(struct sk_buff *skb, struct net_device *dev) } printk(KERN_ERR "mkiss: %s: transmit timed out, %s?\n", dev->name, - (ax->tty->ops->chars_in_buffer(ax->tty) || ax->xleft) ? + (tty_chars_in_buffer(ax->tty) || ax->xleft) ? "bad line quality" : "driver error"); ax->xleft = 0; -- GitLab From 11a859e591befae7413505c68dd241ad8e14748c Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 30 Jul 2008 12:50:12 -0700 Subject: [PATCH 0959/1024] drivers/net/netxen/netxen_nic_hw.c: fix printk warnings drivers/net/netxen/netxen_nic_hw.c: In function 'netxen_nic_pci_mem_read_direct': drivers/net/netxen/netxen_nic_hw.c:1414: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'u64' drivers/net/netxen/netxen_nic_hw.c: In function 'netxen_nic_pci_mem_write_direct': drivers/net/netxen/netxen_nic_hw.c:1487: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'u64' You don't know what type was used for u64 hence they cannot be printed without casting. Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/netxen/netxen_nic_hw.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 4259f3fb899..9aa20f96161 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -1417,7 +1417,8 @@ static int netxen_nic_pci_mem_read_direct(struct netxen_adapter *adapter, (netxen_nic_pci_is_same_window(adapter, off+size-1) == 0)) { write_unlock_irqrestore(&adapter->adapter_lock, flags); printk(KERN_ERR "%s out of bound pci memory access. " - "offset is 0x%llx\n", netxen_nic_driver_name, off); + "offset is 0x%llx\n", netxen_nic_driver_name, + (unsigned long long)off); return -1; } @@ -1490,7 +1491,8 @@ netxen_nic_pci_mem_write_direct(struct netxen_adapter *adapter, u64 off, (netxen_nic_pci_is_same_window(adapter, off+size-1) == 0)) { write_unlock_irqrestore(&adapter->adapter_lock, flags); printk(KERN_ERR "%s out of bound pci memory access. " - "offset is 0x%llx\n", netxen_nic_driver_name, off); + "offset is 0x%llx\n", netxen_nic_driver_name, + (unsigned long long)off); return -1; } -- GitLab From 4f63135eb23015a17eaf4f7478deedf63e98ff5c Mon Sep 17 00:00:00 2001 From: Ben Collins Date: Wed, 30 Jul 2008 12:39:02 -0700 Subject: [PATCH 0960/1024] pegasus: add blacklist support to fix Belkin bluetooth dongle. Reference: https://launchpad.net/bugs/140511 The Belkin bluetooth dongle unfortunately shares the vendor and device id with the network adapter which causes lockups whenever the bluetooth dongle is inserted. Signed-off-by: Stefan Bader Signed-off-by: Ben Collins Cc: Greg Kroah-Hartman Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/usb/pegasus.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index b588c890ea7..a84ba487c71 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -1285,6 +1285,21 @@ static void check_carrier(struct work_struct *work) } } +static int pegasus_blacklisted(struct usb_device *udev) +{ + struct usb_device_descriptor *udd = &udev->descriptor; + + /* Special quirk to keep the driver from handling the Belkin Bluetooth + * dongle which happens to have the same ID. + */ + if ((udd->idVendor == VENDOR_BELKIN && udd->idProduct == 0x0121) && + (udd->bDeviceClass == USB_CLASS_WIRELESS_CONTROLLER) && + (udd->bDeviceProtocol == 1)) + return 1; + + return 0; +} + static int pegasus_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -1296,6 +1311,12 @@ static int pegasus_probe(struct usb_interface *intf, DECLARE_MAC_BUF(mac); usb_get_dev(dev); + + if (pegasus_blacklisted(dev)) { + res = -ENODEV; + goto out; + } + net = alloc_etherdev(sizeof(struct pegasus)); if (!net) { dev_err(&intf->dev, "can't allocate %s\n", "device"); -- GitLab From b11f8d8cc3bb2fa6fa55286babc1a5ebb2e932c4 Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Tue, 15 Jul 2008 02:18:41 -0700 Subject: [PATCH 0961/1024] ethtool: Expand ethtool_cmd.speed to 32 bits Introduce the speed_hi field to ethtool_cmd, using the reserved space, to expand the speed field to 2^32 Megabits/second. Making this field expansion now gives us plenty of time to fix up the user-space pieces that use SIOCETHTOOL before hardware faster than 64 Gb/s is available. Signed-off-by: Brandon Philips Signed-off-by: Jeff Garzik --- include/linux/ethtool.h | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 8bb5e87df36..b4b038b89ee 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -27,9 +27,24 @@ struct ethtool_cmd { __u8 autoneg; /* Enable or disable autonegotiation */ __u32 maxtxpkt; /* Tx pkts before generating tx int */ __u32 maxrxpkt; /* Rx pkts before generating rx int */ - __u32 reserved[4]; + __u16 speed_hi; + __u16 reserved2; + __u32 reserved[3]; }; +static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep, + __u32 speed) +{ + + ep->speed = (__u16)speed; + ep->speed_hi = (__u16)(speed >> 16); +} + +static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep) +{ + return (ep->speed_hi << 16) | ep->speed; +} + #define ETHTOOL_BUSINFO_LEN 32 /* these strings are set to whatever the driver author decides... */ struct ethtool_drvinfo { -- GitLab From 9a5d3414202a21ed4b053657345ea0fd492d513a Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 25 Jul 2008 12:07:22 -0700 Subject: [PATCH 0962/1024] 3c59x: use netdev_alloc_skb Fix possible bug where end of receive buffer could be overwritten. The allocation needs to allow for the reserved space. This would only happen if device received packet greater than Ethernet standard MTU. Change this driver to use netdev_alloc_skb rather than setting skb->dev directly. For the initial allocation it doesn't need to be GFP_ATOMIC. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/3c59x.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index 8db4e6b8948..491ee16da5c 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -1692,12 +1692,14 @@ vortex_open(struct net_device *dev) vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1)); vp->rx_ring[i].status = 0; /* Clear complete bit. */ vp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ | LAST_FRAG); - skb = dev_alloc_skb(PKT_BUF_SZ); + + skb = __netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN, + GFP_KERNEL); vp->rx_skbuff[i] = skb; if (skb == NULL) break; /* Bad news! */ - skb->dev = dev; /* Mark as being used by this device. */ - skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ + + skb_reserve(skb, NET_IP_ALIGN); /* Align IP on 16 byte boundaries */ vp->rx_ring[i].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE)); } if (i != RX_RING_SIZE) { @@ -2538,7 +2540,7 @@ boomerang_rx(struct net_device *dev) struct sk_buff *skb; entry = vp->dirty_rx % RX_RING_SIZE; if (vp->rx_skbuff[entry] == NULL) { - skb = dev_alloc_skb(PKT_BUF_SZ); + skb = netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN); if (skb == NULL) { static unsigned long last_jif; if (time_after(jiffies, last_jif + 10 * HZ)) { @@ -2549,8 +2551,8 @@ boomerang_rx(struct net_device *dev) mod_timer(&vp->rx_oom_timer, RUN_AT(HZ * 1)); break; /* Bad news! */ } - skb->dev = dev; /* Mark as being used by this device. */ - skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ + + skb_reserve(skb, NET_IP_ALIGN); vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE)); vp->rx_skbuff[entry] = skb; } -- GitLab From fe414248551e2880fe8913577699003ff145ab9d Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 23 Jul 2008 17:41:52 +0200 Subject: [PATCH 0963/1024] dm9000: Support MAC address setting through platform data. The dm9000 driver reads the chip's MAC address from the attached EEPROM. When no EEPROM is present, or when the MAC address is invalid, it falls back to reading the address from the chip. This patch lets platform code set the desired MAC address through platform data. Signed-off-by: Laurent Pinchart Signed-off-by: Jeff Garzik --- drivers/net/dm9000.c | 5 +++++ include/linux/dm9000.h | 1 + 2 files changed, 6 insertions(+) diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 0b0f1c407a7..f42c23f4265 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -1374,6 +1374,11 @@ dm9000_probe(struct platform_device *pdev) for (i = 0; i < 6; i += 2) dm9000_read_eeprom(db, i / 2, ndev->dev_addr+i); + if (!is_valid_ether_addr(ndev->dev_addr) && pdata != NULL) { + mac_src = "platform data"; + memcpy(ndev->dev_addr, pdata->dev_addr, 6); + } + if (!is_valid_ether_addr(ndev->dev_addr)) { /* try reading from mac */ diff --git a/include/linux/dm9000.h b/include/linux/dm9000.h index fc82446b642..c30879cf93b 100644 --- a/include/linux/dm9000.h +++ b/include/linux/dm9000.h @@ -27,6 +27,7 @@ struct dm9000_plat_data { unsigned int flags; + unsigned char dev_addr[6]; /* allow replacement IO routines */ -- GitLab From c16d118537cadb21d186e35aebad90a13cd78846 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 22 Jul 2008 13:13:12 +0800 Subject: [PATCH 0964/1024] [netdrvr] Drivers should not set IFF_* flag themselves Some hardware set promisc when they are requested to set IFF_ALLMULTI flag. It's ok, but if drivers set IFF_PROMISC flag when they set promisc, it will broken upper layer handle for promisc and allmulti. In addition, drivers can use their own hardware programming to make it. So do not allow drivers to set IFF_* flags. This is a general driver fix, so I didn't split it to pieces and send to specific driver maintainers. Signed-off-by: Wang Chen Signed-off-by: Jeff Garzik --- drivers/net/3c523.c | 4 +--- drivers/net/3c527.c | 9 +++------ drivers/net/atp.c | 9 ++------- drivers/net/de620.c | 7 ------- drivers/net/eepro.c | 8 -------- drivers/net/eth16i.c | 1 - drivers/net/lp486e.c | 2 -- drivers/net/ni5010.c | 1 - drivers/net/ni52.c | 2 +- drivers/net/sun3_82586.c | 7 ++----- drivers/net/wireless/orinoco.c | 7 ------- drivers/net/wireless/wavelan.c | 3 --- drivers/net/wireless/wavelan_cs.c | 6 ------ 13 files changed, 9 insertions(+), 57 deletions(-) diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c index dc6e474229b..e2ce41d3828 100644 --- a/drivers/net/3c523.c +++ b/drivers/net/3c523.c @@ -640,10 +640,8 @@ static int init586(struct net_device *dev) cfg_cmd->time_low = 0x00; cfg_cmd->time_high = 0xf2; cfg_cmd->promisc = 0; - if (dev->flags & (IFF_ALLMULTI | IFF_PROMISC)) { + if (dev->flags & (IFF_ALLMULTI | IFF_PROMISC)) cfg_cmd->promisc = 1; - dev->flags |= IFF_PROMISC; - } cfg_cmd->carr_coll = 0x00; p->scb->cbl_offset = make16(cfg_cmd); diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c index 6aca0c640f1..abc84f76597 100644 --- a/drivers/net/3c527.c +++ b/drivers/net/3c527.c @@ -1521,14 +1521,11 @@ static void do_mc32_set_multicast_list(struct net_device *dev, int retry) struct mc32_local *lp = netdev_priv(dev); u16 filt = (1<<2); /* Save Bad Packets, for stats purposes */ - if (dev->flags&IFF_PROMISC) + if ((dev->flags&IFF_PROMISC) || + (dev->flags&IFF_ALLMULTI) || + dev->mc_count > 10) /* Enable promiscuous mode */ filt |= 1; - else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > 10) - { - dev->flags|=IFF_PROMISC; - filt |= 1; - } else if(dev->mc_count) { unsigned char block[62]; diff --git a/drivers/net/atp.c b/drivers/net/atp.c index 3d4433358a3..c10cd8058e2 100644 --- a/drivers/net/atp.c +++ b/drivers/net/atp.c @@ -854,14 +854,9 @@ static void set_rx_mode_8002(struct net_device *dev) struct net_local *lp = netdev_priv(dev); long ioaddr = dev->base_addr; - if ( dev->mc_count > 0 || (dev->flags & (IFF_ALLMULTI|IFF_PROMISC))) { - /* We must make the kernel realise we had to move - * into promisc mode or we start all out war on - * the cable. - AC - */ - dev->flags|=IFF_PROMISC; + if (dev->mc_count > 0 || (dev->flags & (IFF_ALLMULTI|IFF_PROMISC))) lp->addr_mode = CMR2h_PROMISC; - } else + else lp->addr_mode = CMR2h_Normal; write_reg_high(ioaddr, CMR2, lp->addr_mode); } diff --git a/drivers/net/de620.c b/drivers/net/de620.c index 3f5190c654c..d454e143483 100644 --- a/drivers/net/de620.c +++ b/drivers/net/de620.c @@ -488,13 +488,6 @@ static void de620_set_multicast_list(struct net_device *dev) { if (dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC)) { /* Enable promiscuous mode */ - /* - * We must make the kernel realise we had to move - * into promisc mode or we start all out war on - * the cable. - AC - */ - dev->flags|=IFF_PROMISC; - de620_set_register(dev, W_TCR, (TCR_DEF & ~RXPBM) | RXALL); } else diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c index 56f50491a45..1f11350e16c 100644 --- a/drivers/net/eepro.c +++ b/drivers/net/eepro.c @@ -1283,14 +1283,6 @@ set_multicast_list(struct net_device *dev) if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || dev->mc_count > 63) { - /* - * We must make the kernel realise we had to move - * into promisc mode or we start all out war on - * the cable. If it was a promisc request the - * flag is already set. If not we assert it. - */ - dev->flags|=IFF_PROMISC; - eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */ mode = inb(ioaddr + REG2); outb(mode | PRMSC_Mode, ioaddr + REG2); diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c index e3dd8b13690..bee8b3fbc56 100644 --- a/drivers/net/eth16i.c +++ b/drivers/net/eth16i.c @@ -1356,7 +1356,6 @@ static void eth16i_multicast(struct net_device *dev) if(dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC)) { - dev->flags|=IFF_PROMISC; /* Must do this */ outb(3, ioaddr + RECEIVE_MODE_REG); } else { outb(2, ioaddr + RECEIVE_MODE_REG); diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c index 591a7e4220c..83fa9d82a00 100644 --- a/drivers/net/lp486e.c +++ b/drivers/net/lp486e.c @@ -1272,8 +1272,6 @@ static void set_multicast_list(struct net_device *dev) { return; } if (dev->mc_count == 0 && !(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) { - if (dev->flags & IFF_ALLMULTI) - dev->flags |= IFF_PROMISC; lp->i596_config[8] &= ~0x01; } else { lp->i596_config[8] |= 0x01; diff --git a/drivers/net/ni5010.c b/drivers/net/ni5010.c index a20005c09e0..8e0ca9f4e40 100644 --- a/drivers/net/ni5010.c +++ b/drivers/net/ni5010.c @@ -648,7 +648,6 @@ static void ni5010_set_multicast_list(struct net_device *dev) PRINTK2((KERN_DEBUG "%s: entering set_multicast_list\n", dev->name)); if (dev->flags&IFF_PROMISC || dev->flags&IFF_ALLMULTI || dev->mc_list) { - dev->flags |= IFF_PROMISC; outb(RMD_PROMISC, EDLC_RMODE); /* Enable promiscuous mode */ PRINTK((KERN_DEBUG "%s: Entering promiscuous mode\n", dev->name)); } else { diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c index a316dcc8a06..b9a882d362d 100644 --- a/drivers/net/ni52.c +++ b/drivers/net/ni52.c @@ -621,7 +621,7 @@ static int init586(struct net_device *dev) if (num_addrs > len) { printk(KERN_ERR "%s: switching to promisc. mode\n", dev->name); - dev->flags |= IFF_PROMISC; + writeb(0x01, &cfg_cmd->promisc); } } if (dev->flags & IFF_PROMISC) diff --git a/drivers/net/sun3_82586.c b/drivers/net/sun3_82586.c index 9b2a7f7bb25..e531302d95f 100644 --- a/drivers/net/sun3_82586.c +++ b/drivers/net/sun3_82586.c @@ -425,14 +425,11 @@ static int init586(struct net_device *dev) int len = ((char *) p->iscp - (char *) ptr - 8) / 6; if(num_addrs > len) { printk("%s: switching to promisc. mode\n",dev->name); - dev->flags|=IFF_PROMISC; + cfg_cmd->promisc = 1; } } if(dev->flags&IFF_PROMISC) - { - cfg_cmd->promisc=1; - dev->flags|=IFF_PROMISC; - } + cfg_cmd->promisc = 1; cfg_cmd->carr_coll = 0x00; p->scb->cbl_offset = make16(cfg_cmd); diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index b047306bf38..1ebcafe7ca5 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -1998,13 +1998,6 @@ __orinoco_set_multicast_list(struct net_device *dev) else priv->mc_count = mc_count; } - - /* Since we can set the promiscuous flag when it wasn't asked - for, make sure the net_device knows about it. */ - if (priv->promiscuous) - dev->flags |= IFF_PROMISC; - else - dev->flags &= ~IFF_PROMISC; } /* This must be called from user context, without locks held - use diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c index 49ae9700395..136220b5ca8 100644 --- a/drivers/net/wireless/wavelan.c +++ b/drivers/net/wireless/wavelan.c @@ -1409,9 +1409,6 @@ static void wavelan_set_multicast_list(struct net_device * dev) lp->mc_count = 0; wv_82586_reconfig(dev); - - /* Tell the kernel that we are doing a really bad job. */ - dev->flags |= IFF_PROMISC; } } else /* Are there multicast addresses to send? */ diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c index b584c0ecc62..00a3559e5aa 100644 --- a/drivers/net/wireless/wavelan_cs.c +++ b/drivers/net/wireless/wavelan_cs.c @@ -1412,9 +1412,6 @@ wavelan_set_multicast_list(struct net_device * dev) lp->mc_count = 0; wv_82593_reconfig(dev); - - /* Tell the kernel that we are doing a really bad job... */ - dev->flags |= IFF_PROMISC; } } else @@ -1433,9 +1430,6 @@ wavelan_set_multicast_list(struct net_device * dev) lp->mc_count = 0; wv_82593_reconfig(dev); - - /* Tell the kernel that we are doing a really bad job... */ - dev->flags |= IFF_ALLMULTI; } } else -- GitLab From ee7af8264dafa0c8c76a8dc596803966c2e29ebc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 6 Aug 2008 23:35:59 -0700 Subject: [PATCH 0965/1024] pkt_sched: Fix "parent is root" test in qdisc_create(). As noticed by Stephen Hemminger, the root qdisc is denoted by TC_H_ROOT, not zero. Signed-off-by: David S. Miller --- net/sched/sch_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index 4840aff4725..83b23b55ce3 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -792,7 +792,7 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue, goto err_out3; } } - if (parent && !(sch->flags & TCQ_F_INGRESS)) + if ((parent != TC_H_ROOT) && !(sch->flags & TCQ_F_INGRESS)) list_add_tail(&sch->list, &dev_queue->qdisc->list); return sch; -- GitLab From 6edafaaf6f5e70ef1e620ff01bd6bacebe1e0718 Mon Sep 17 00:00:00 2001 From: Gui Jianfeng Date: Wed, 6 Aug 2008 23:50:04 -0700 Subject: [PATCH 0966/1024] tcp: Fix kernel panic when calling tcp_v(4/6)_md5_do_lookup If the following packet flow happen, kernel will panic. MathineA MathineB SYN ----------------------> SYN+ACK <---------------------- ACK(bad seq) ----------------------> When a bad seq ACK is received, tcp_v4_md5_do_lookup(skb->sk, ip_hdr(skb)->daddr)) is finally called by tcp_v4_reqsk_send_ack(), but the first parameter(skb->sk) is NULL at that moment, so kernel panic happens. This patch fixes this bug. OOPS output is as following: [ 302.812793] IP: [] tcp_v4_md5_do_lookup+0x12/0x42 [ 302.817075] Oops: 0000 [#1] SMP [ 302.819815] Modules linked in: ipv6 loop dm_multipath rtc_cmos rtc_core rtc_lib pcspkr pcnet32 mii i2c_piix4 parport_pc i2c_core parport ac button ata_piix libata dm_mod mptspi mptscsih mptbase scsi_transport_spi sd_mod scsi_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] [ 302.849946] [ 302.851198] Pid: 0, comm: swapper Not tainted (2.6.27-rc1-guijf #5) [ 302.855184] EIP: 0060:[] EFLAGS: 00010296 CPU: 0 [ 302.858296] EIP is at tcp_v4_md5_do_lookup+0x12/0x42 [ 302.861027] EAX: 0000001e EBX: 00000000 ECX: 00000046 EDX: 00000046 [ 302.864867] ESI: ceb69e00 EDI: 1467a8c0 EBP: cf75f180 ESP: c0792e54 [ 302.868333] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 302.871287] Process swapper (pid: 0, ti=c0792000 task=c0712340 task.ti=c0746000) [ 302.875592] Stack: c06f413a 00000000 cf75f180 ceb69e00 00000000 c05d0d86 000016d0 ceac5400 [ 302.883275] c05d28f8 000016d0 ceb69e00 ceb69e20 681bf6e3 00001000 00000000 0a67a8c0 [ 302.890971] ceac5400 c04250a3 c06f413a c0792eb0 c0792edc cf59a620 cf59a620 cf59a634 [ 302.900140] Call Trace: [ 302.902392] [] tcp_v4_reqsk_send_ack+0x17/0x35 [ 302.907060] [] tcp_check_req+0x156/0x372 [ 302.910082] [] printk+0x14/0x18 [ 302.912868] [] tcp_v4_do_rcv+0x1d3/0x2bf [ 302.917423] [] tcp_v4_rcv+0x563/0x5b9 [ 302.920453] [] ip_local_deliver_finish+0xe8/0x183 [ 302.923865] [] ip_rcv_finish+0x286/0x2a3 [ 302.928569] [] dev_alloc_skb+0x11/0x25 [ 302.931563] [] netif_receive_skb+0x2d6/0x33a [ 302.934914] [] pcnet32_poll+0x333/0x680 [pcnet32] [ 302.938735] [] net_rx_action+0x5c/0xfe [ 302.941792] [] __do_softirq+0x5d/0xc1 [ 302.944788] [] __do_softirq+0x0/0xc1 [ 302.948999] [] do_softirq+0x55/0x88 [ 302.951870] [] handle_fasteoi_irq+0x0/0xa4 [ 302.954986] [] irq_exit+0x35/0x69 [ 302.959081] [] do_IRQ+0x99/0xae [ 302.961896] [] common_interrupt+0x23/0x28 [ 302.966279] [] default_idle+0x2a/0x3d [ 302.969212] [] cpu_idle+0xb2/0xd2 [ 302.972169] ======================= [ 302.974274] Code: fc ff 84 d2 0f 84 df fd ff ff e9 34 fe ff ff 83 c4 0c 5b 5e 5f 5d c3 90 90 57 89 d7 56 53 89 c3 50 68 3a 41 6f c0 e8 e9 55 e5 ff <8b> 93 9c 04 00 00 58 85 d2 59 74 1e 8b 72 10 31 db 31 c9 85 f6 [ 303.011610] EIP: [] tcp_v4_md5_do_lookup+0x12/0x42 SS:ESP 0068:c0792e54 [ 303.018360] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Gui Jianfeng Signed-off-by: David S. Miller --- include/net/request_sock.h | 2 +- net/dccp/dccp.h | 3 ++- net/dccp/minisocks.c | 3 ++- net/ipv4/tcp_ipv4.c | 4 ++-- net/ipv4/tcp_minisocks.c | 2 +- net/ipv6/tcp_ipv6.c | 8 +++++--- 6 files changed, 13 insertions(+), 9 deletions(-) diff --git a/include/net/request_sock.h b/include/net/request_sock.h index 8d6e991ef4d..cac811e51f6 100644 --- a/include/net/request_sock.h +++ b/include/net/request_sock.h @@ -33,7 +33,7 @@ struct request_sock_ops { struct kmem_cache *slab; int (*rtx_syn_ack)(struct sock *sk, struct request_sock *req); - void (*send_ack)(struct sk_buff *skb, + void (*send_ack)(struct sock *sk, struct sk_buff *skb, struct request_sock *req); void (*send_reset)(struct sock *sk, struct sk_buff *skb); diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h index 1c2e3ec2eb5..b4bc6e095a0 100644 --- a/net/dccp/dccp.h +++ b/net/dccp/dccp.h @@ -229,7 +229,8 @@ extern void dccp_v4_send_check(struct sock *sk, int len, struct sk_buff *skb); extern int dccp_retransmit_skb(struct sock *sk); extern void dccp_send_ack(struct sock *sk); -extern void dccp_reqsk_send_ack(struct sk_buff *sk, struct request_sock *rsk); +extern void dccp_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, + struct request_sock *rsk); extern void dccp_send_sync(struct sock *sk, const u64 seq, const enum dccp_pkt_type pkt_type); diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index 66dca5bba85..b2804e2d1b8 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -296,7 +296,8 @@ int dccp_child_process(struct sock *parent, struct sock *child, EXPORT_SYMBOL_GPL(dccp_child_process); -void dccp_reqsk_send_ack(struct sk_buff *skb, struct request_sock *rsk) +void dccp_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, + struct request_sock *rsk) { DCCP_BUG("DCCP-ACK packets are never sent in LISTEN/RESPOND state"); } diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 91a8cfddf1c..44c1e934824 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -687,14 +687,14 @@ static void tcp_v4_timewait_ack(struct sock *sk, struct sk_buff *skb) inet_twsk_put(tw); } -static void tcp_v4_reqsk_send_ack(struct sk_buff *skb, +static void tcp_v4_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, struct request_sock *req) { tcp_v4_send_ack(skb, tcp_rsk(req)->snt_isn + 1, tcp_rsk(req)->rcv_isn + 1, req->rcv_wnd, req->ts_recent, 0, - tcp_v4_md5_do_lookup(skb->sk, ip_hdr(skb)->daddr)); + tcp_v4_md5_do_lookup(sk, ip_hdr(skb)->daddr)); } /* diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index 204c4216266..6d286f58c00 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -609,7 +609,7 @@ struct sock *tcp_check_req(struct sock *sk,struct sk_buff *skb, tcp_rsk(req)->rcv_isn + 1, tcp_rsk(req)->rcv_isn + 1 + req->rcv_wnd)) { /* Out of window: send ACK and drop. */ if (!(flg & TCP_FLAG_RST)) - req->rsk_ops->send_ack(skb, req); + req->rsk_ops->send_ack(sk, skb, req); if (paws_reject) NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_PAWSESTABREJECTED); return NULL; diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 78185a40921..5b90b369ccb 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -69,7 +69,8 @@ #include static void tcp_v6_send_reset(struct sock *sk, struct sk_buff *skb); -static void tcp_v6_reqsk_send_ack(struct sk_buff *skb, struct request_sock *req); +static void tcp_v6_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, + struct request_sock *req); static int tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb); @@ -1138,10 +1139,11 @@ static void tcp_v6_timewait_ack(struct sock *sk, struct sk_buff *skb) inet_twsk_put(tw); } -static void tcp_v6_reqsk_send_ack(struct sk_buff *skb, struct request_sock *req) +static void tcp_v6_reqsk_send_ack(struct sock *sk, struct sk_buff *skb, + struct request_sock *req) { tcp_v6_send_ack(skb, tcp_rsk(req)->snt_isn + 1, tcp_rsk(req)->rcv_isn + 1, req->rcv_wnd, req->ts_recent, - tcp_v6_md5_do_lookup(skb->sk, &ipv6_hdr(skb)->daddr)); + tcp_v6_md5_do_lookup(sk, &ipv6_hdr(skb)->daddr)); } -- GitLab From f0c76d61779b153dbfb955db3f144c62d02173c2 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Wed, 2 Jul 2008 18:21:58 -0700 Subject: [PATCH 0967/1024] bonding: refactor mii monitor Refactor mii monitor. As with the previous ARP monitor refactor, the motivation for this is to handle locking rationally (in this case, removing conditional locking) and generally clean up the code. This patch breaks up the monolithic mii monitor into two phases: an inspection phase, followed by an optional commit phase. The commit phase is the only portion that requires RTNL or makes changes to state, and is only called when inspection finds something to change. Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- drivers/net/bonding/bond_3ad.c | 1 + drivers/net/bonding/bond_main.c | 394 ++++++++++++++------------------ 2 files changed, 173 insertions(+), 222 deletions(-) diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index ebb539e090c..6106660a4a4 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -2107,6 +2107,7 @@ void bond_3ad_state_machine_handler(struct work_struct *work) aggregator = __get_first_agg(port); ad_agg_selection_logic(aggregator); } + bond_3ad_set_carrier(bond); } // for each port run the state machines diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index a641eeaa2a2..c792138511e 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2223,272 +2223,217 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in /*-------------------------------- Monitoring -------------------------------*/ -/* - * if !have_locks, return nonzero if a failover is necessary. if - * have_locks, do whatever failover activities are needed. - * - * This is to separate the inspection and failover steps for locking - * purposes; failover requires rtnl, but acquiring it for every - * inspection is undesirable, so a wrapper first does inspection, and - * the acquires the necessary locks and calls again to perform - * failover if needed. Since all locks are dropped, a complete - * restart is needed between calls. - */ -static int __bond_mii_monitor(struct bonding *bond, int have_locks) -{ - struct slave *slave, *oldcurrent; - int do_failover = 0; - int i; - - if (bond->slave_cnt == 0) - goto out; - /* we will try to read the link status of each of our slaves, and - * set their IFF_RUNNING flag appropriately. For each slave not - * supporting MII status, we won't do anything so that a user-space - * program could monitor the link itself if needed. - */ - - read_lock(&bond->curr_slave_lock); - oldcurrent = bond->curr_active_slave; - read_unlock(&bond->curr_slave_lock); +static int bond_miimon_inspect(struct bonding *bond) +{ + struct slave *slave; + int i, link_state, commit = 0; bond_for_each_slave(bond, slave, i) { - struct net_device *slave_dev = slave->dev; - int link_state; - u16 old_speed = slave->speed; - u8 old_duplex = slave->duplex; + slave->new_link = BOND_LINK_NOCHANGE; - link_state = bond_check_dev_link(bond, slave_dev, 0); + link_state = bond_check_dev_link(bond, slave->dev, 0); switch (slave->link) { - case BOND_LINK_UP: /* the link was up */ - if (link_state == BMSR_LSTATUS) { - if (!oldcurrent) { - if (!have_locks) - return 1; - do_failover = 1; - } - break; - } else { /* link going down */ - slave->link = BOND_LINK_FAIL; - slave->delay = bond->params.downdelay; - - if (slave->link_failure_count < UINT_MAX) { - slave->link_failure_count++; - } + case BOND_LINK_UP: + if (link_state) + continue; - if (bond->params.downdelay) { - printk(KERN_INFO DRV_NAME - ": %s: link status down for %s " - "interface %s, disabling it in " - "%d ms.\n", - bond->dev->name, - IS_UP(slave_dev) - ? ((bond->params.mode == BOND_MODE_ACTIVEBACKUP) - ? ((slave == oldcurrent) - ? "active " : "backup ") - : "") - : "idle ", - slave_dev->name, - bond->params.downdelay * bond->params.miimon); - } + slave->link = BOND_LINK_FAIL; + slave->delay = bond->params.downdelay; + if (slave->delay) { + printk(KERN_INFO DRV_NAME + ": %s: link status down for %s" + "interface %s, disabling it in %d ms.\n", + bond->dev->name, + (bond->params.mode == + BOND_MODE_ACTIVEBACKUP) ? + ((slave->state == BOND_STATE_ACTIVE) ? + "active " : "backup ") : "", + slave->dev->name, + bond->params.downdelay * bond->params.miimon); } - /* no break ! fall through the BOND_LINK_FAIL test to - ensure proper action to be taken - */ - case BOND_LINK_FAIL: /* the link has just gone down */ - if (link_state != BMSR_LSTATUS) { - /* link stays down */ - if (slave->delay <= 0) { - if (!have_locks) - return 1; - - /* link down for too long time */ - slave->link = BOND_LINK_DOWN; - - /* in active/backup mode, we must - * completely disable this interface - */ - if ((bond->params.mode == BOND_MODE_ACTIVEBACKUP) || - (bond->params.mode == BOND_MODE_8023AD)) { - bond_set_slave_inactive_flags(slave); - } - - printk(KERN_INFO DRV_NAME - ": %s: link status definitely " - "down for interface %s, " - "disabling it\n", - bond->dev->name, - slave_dev->name); - - /* notify ad that the link status has changed */ - if (bond->params.mode == BOND_MODE_8023AD) { - bond_3ad_handle_link_change(slave, BOND_LINK_DOWN); - } - - if ((bond->params.mode == BOND_MODE_TLB) || - (bond->params.mode == BOND_MODE_ALB)) { - bond_alb_handle_link_change(bond, slave, BOND_LINK_DOWN); - } - - if (slave == oldcurrent) { - do_failover = 1; - } - } else { - slave->delay--; - } - } else { - /* link up again */ - slave->link = BOND_LINK_UP; + /*FALLTHRU*/ + case BOND_LINK_FAIL: + if (link_state) { + /* + * recovered before downdelay expired + */ + slave->link = BOND_LINK_UP; slave->jiffies = jiffies; printk(KERN_INFO DRV_NAME ": %s: link status up again after %d " "ms for interface %s.\n", bond->dev->name, - (bond->params.downdelay - slave->delay) * bond->params.miimon, - slave_dev->name); + (bond->params.downdelay - slave->delay) * + bond->params.miimon, + slave->dev->name); + continue; } - break; - case BOND_LINK_DOWN: /* the link was down */ - if (link_state != BMSR_LSTATUS) { - /* the link stays down, nothing more to do */ - break; - } else { /* link going up */ - slave->link = BOND_LINK_BACK; - slave->delay = bond->params.updelay; - if (bond->params.updelay) { - /* if updelay == 0, no need to - advertise about a 0 ms delay */ - printk(KERN_INFO DRV_NAME - ": %s: link status up for " - "interface %s, enabling it " - "in %d ms.\n", - bond->dev->name, - slave_dev->name, - bond->params.updelay * bond->params.miimon); - } + if (slave->delay <= 0) { + slave->new_link = BOND_LINK_DOWN; + commit++; + continue; } - /* no break ! fall through the BOND_LINK_BACK state in - case there's something to do. - */ - case BOND_LINK_BACK: /* the link has just come back */ - if (link_state != BMSR_LSTATUS) { - /* link down again */ - slave->link = BOND_LINK_DOWN; + slave->delay--; + break; + + case BOND_LINK_DOWN: + if (!link_state) + continue; + + slave->link = BOND_LINK_BACK; + slave->delay = bond->params.updelay; + + if (slave->delay) { + printk(KERN_INFO DRV_NAME + ": %s: link status up for " + "interface %s, enabling it in %d ms.\n", + bond->dev->name, slave->dev->name, + bond->params.updelay * + bond->params.miimon); + } + /*FALLTHRU*/ + case BOND_LINK_BACK: + if (!link_state) { + slave->link = BOND_LINK_DOWN; printk(KERN_INFO DRV_NAME ": %s: link status down again after %d " "ms for interface %s.\n", bond->dev->name, - (bond->params.updelay - slave->delay) * bond->params.miimon, - slave_dev->name); - } else { - /* link stays up */ - if (slave->delay == 0) { - if (!have_locks) - return 1; - - /* now the link has been up for long time enough */ - slave->link = BOND_LINK_UP; - slave->jiffies = jiffies; - - if (bond->params.mode == BOND_MODE_8023AD) { - /* prevent it from being the active one */ - slave->state = BOND_STATE_BACKUP; - } else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) { - /* make it immediately active */ - slave->state = BOND_STATE_ACTIVE; - } else if (slave != bond->primary_slave) { - /* prevent it from being the active one */ - slave->state = BOND_STATE_BACKUP; - } + (bond->params.updelay - slave->delay) * + bond->params.miimon, + slave->dev->name); - printk(KERN_INFO DRV_NAME - ": %s: link status definitely " - "up for interface %s.\n", - bond->dev->name, - slave_dev->name); - - /* notify ad that the link status has changed */ - if (bond->params.mode == BOND_MODE_8023AD) { - bond_3ad_handle_link_change(slave, BOND_LINK_UP); - } - - if ((bond->params.mode == BOND_MODE_TLB) || - (bond->params.mode == BOND_MODE_ALB)) { - bond_alb_handle_link_change(bond, slave, BOND_LINK_UP); - } - - if ((!oldcurrent) || - (slave == bond->primary_slave)) { - do_failover = 1; - } - } else { - slave->delay--; - } + continue; } + + if (slave->delay <= 0) { + slave->new_link = BOND_LINK_UP; + commit++; + continue; + } + + slave->delay--; break; - default: - /* Should not happen */ - printk(KERN_ERR DRV_NAME - ": %s: Error: %s Illegal value (link=%d)\n", - bond->dev->name, - slave->dev->name, - slave->link); - goto out; - } /* end of switch (slave->link) */ + } + } - bond_update_speed_duplex(slave); + return commit; +} - if (bond->params.mode == BOND_MODE_8023AD) { - if (old_speed != slave->speed) { - bond_3ad_adapter_speed_changed(slave); - } +static void bond_miimon_commit(struct bonding *bond) +{ + struct slave *slave; + int i; + + bond_for_each_slave(bond, slave, i) { + switch (slave->new_link) { + case BOND_LINK_NOCHANGE: + continue; + + case BOND_LINK_UP: + slave->link = BOND_LINK_UP; + slave->jiffies = jiffies; - if (old_duplex != slave->duplex) { - bond_3ad_adapter_duplex_changed(slave); + if (bond->params.mode == BOND_MODE_8023AD) { + /* prevent it from being the active one */ + slave->state = BOND_STATE_BACKUP; + } else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) { + /* make it immediately active */ + slave->state = BOND_STATE_ACTIVE; + } else if (slave != bond->primary_slave) { + /* prevent it from being the active one */ + slave->state = BOND_STATE_BACKUP; } - } - } /* end of for */ + printk(KERN_INFO DRV_NAME + ": %s: link status definitely " + "up for interface %s.\n", + bond->dev->name, slave->dev->name); - if (do_failover) { - ASSERT_RTNL(); + /* notify ad that the link status has changed */ + if (bond->params.mode == BOND_MODE_8023AD) + bond_3ad_handle_link_change(slave, BOND_LINK_UP); - write_lock_bh(&bond->curr_slave_lock); + if ((bond->params.mode == BOND_MODE_TLB) || + (bond->params.mode == BOND_MODE_ALB)) + bond_alb_handle_link_change(bond, slave, + BOND_LINK_UP); - bond_select_active_slave(bond); + if (!bond->curr_active_slave || + (slave == bond->primary_slave)) + goto do_failover; - write_unlock_bh(&bond->curr_slave_lock); + continue; - } else - bond_set_carrier(bond); + case BOND_LINK_DOWN: + slave->link = BOND_LINK_DOWN; -out: - return 0; + if (bond->params.mode == BOND_MODE_ACTIVEBACKUP || + bond->params.mode == BOND_MODE_8023AD) + bond_set_slave_inactive_flags(slave); + + printk(KERN_INFO DRV_NAME + ": %s: link status definitely down for " + "interface %s, disabling it\n", + bond->dev->name, slave->dev->name); + + if (bond->params.mode == BOND_MODE_8023AD) + bond_3ad_handle_link_change(slave, + BOND_LINK_DOWN); + + if (bond->params.mode == BOND_MODE_TLB || + bond->params.mode == BOND_MODE_ALB) + bond_alb_handle_link_change(bond, slave, + BOND_LINK_DOWN); + + if (slave == bond->curr_active_slave) + goto do_failover; + + continue; + + default: + printk(KERN_ERR DRV_NAME + ": %s: invalid new link %d on slave %s\n", + bond->dev->name, slave->new_link, + slave->dev->name); + slave->new_link = BOND_LINK_NOCHANGE; + + continue; + } + +do_failover: + ASSERT_RTNL(); + write_lock_bh(&bond->curr_slave_lock); + bond_select_active_slave(bond); + write_unlock_bh(&bond->curr_slave_lock); + } + + bond_set_carrier(bond); } /* * bond_mii_monitor * * Really a wrapper that splits the mii monitor into two phases: an - * inspection, then (if inspection indicates something needs to be - * done) an acquisition of appropriate locks followed by another pass - * to implement whatever link state changes are indicated. + * inspection, then (if inspection indicates something needs to be done) + * an acquisition of appropriate locks followed by a commit phase to + * implement whatever link state changes are indicated. */ void bond_mii_monitor(struct work_struct *work) { struct bonding *bond = container_of(work, struct bonding, mii_work.work); - unsigned long delay; read_lock(&bond->lock); - if (bond->kill_timers) { - read_unlock(&bond->lock); - return; - } + if (bond->kill_timers) + goto out; + + if (bond->slave_cnt == 0) + goto re_arm; if (bond->send_grat_arp) { read_lock(&bond->curr_slave_lock); @@ -2496,19 +2441,24 @@ void bond_mii_monitor(struct work_struct *work) read_unlock(&bond->curr_slave_lock); } - if (__bond_mii_monitor(bond, 0)) { + if (bond_miimon_inspect(bond)) { read_unlock(&bond->lock); rtnl_lock(); read_lock(&bond->lock); - __bond_mii_monitor(bond, 1); + + bond_miimon_commit(bond); + read_unlock(&bond->lock); rtnl_unlock(); /* might sleep, hold no other locks */ read_lock(&bond->lock); } - delay = msecs_to_jiffies(bond->params.miimon); +re_arm: + if (bond->params.miimon) + queue_delayed_work(bond->wq, &bond->mii_work, + msecs_to_jiffies(bond->params.miimon)); +out: read_unlock(&bond->lock); - queue_delayed_work(bond->wq, &bond->mii_work, delay); } static __be32 bond_glean_dev_ip(struct net_device *dev) -- GitLab From db018a5f49e1768891221a580e59f6825c52ab7a Mon Sep 17 00:00:00 2001 From: Moni Shoua Date: Wed, 2 Jul 2008 18:21:59 -0700 Subject: [PATCH 0968/1024] bonding: Don't destroy bonding master when removing slave via sysfs It is wrong to destroy a bonding master from a context that uses the sysfs of that bond. When last IPoIB slave is unenslaved from by writing to a sysfs file (for bond0 this would be /sys/class/net/bond0/bonding/slaves) the driver tries to destroy the bond. This is wrong and can lead to a lockup or a crash. This fix lets the bonding master stay and relies on the user to destroy the bonding master if necessary (i.e. before module ib_ipoib is unloaded) This patch affects only bonds of IPoIB slaves. Ethernet slaves stay unaffected. Signed-off-by: Moni Shoua Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- drivers/net/bonding/bond_sysfs.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 6caac0ffb2f..3bdb4738252 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -350,9 +350,6 @@ static ssize_t bonding_store_slaves(struct device *d, if (dev) { printk(KERN_INFO DRV_NAME ": %s: Removing slave %s\n", bond->dev->name, dev->name); - if (bond->setup_by_slave) - res = bond_release_and_destroy(bond->dev, dev); - else res = bond_release(bond->dev, dev); if (res) { ret = res; -- GitLab From cc9bd5cebc0825e0fabc0186ab85806a0891104f Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Wed, 2 Jul 2008 18:22:00 -0700 Subject: [PATCH 0969/1024] net/core: Uninline skb_bond(). Otherwise subsequent changes need multiple return values. Signed-off-by: Joe Eykholt Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- net/core/dev.c | 28 ++++++++-------------------- 1 file changed, 8 insertions(+), 20 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 01993ad74e7..4a09833331f 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1939,22 +1939,6 @@ int netif_rx_ni(struct sk_buff *skb) EXPORT_SYMBOL(netif_rx_ni); -static inline struct net_device *skb_bond(struct sk_buff *skb) -{ - struct net_device *dev = skb->dev; - - if (dev->master) { - if (skb_bond_should_drop(skb)) { - kfree_skb(skb); - return NULL; - } - skb->dev = dev->master; - } - - return dev; -} - - static void net_tx_action(struct softirq_action *h) { struct softnet_data *sd = &__get_cpu_var(softnet_data); @@ -2194,10 +2178,14 @@ int netif_receive_skb(struct sk_buff *skb) if (!skb->iif) skb->iif = skb->dev->ifindex; - orig_dev = skb_bond(skb); - - if (!orig_dev) - return NET_RX_DROP; + orig_dev = skb->dev; + if (orig_dev->master) { + if (skb_bond_should_drop(skb)) { + kfree_skb(skb); + return NET_RX_DROP; + } + skb->dev = orig_dev->master; + } __get_cpu_var(netdev_rx_stat).total++; -- GitLab From 0d7a3681232f545c6a59f77e60f7667673ef0e93 Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Wed, 2 Jul 2008 18:22:01 -0700 Subject: [PATCH 0970/1024] net/core: Allow certain receives on inactive slave. Allow a packet_type that specifies the exact device to receive even on an inactive bonding slave devices. This is important for some L2 protocols such as LLDP and FCoE. This can eventually be used for the bonding special cases as well. Signed-off-by: Joe Eykholt Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- net/core/dev.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 4a09833331f..dab97c7cf27 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2165,6 +2165,7 @@ int netif_receive_skb(struct sk_buff *skb) { struct packet_type *ptype, *pt_prev; struct net_device *orig_dev; + struct net_device *null_or_orig; int ret = NET_RX_DROP; __be16 type; @@ -2178,13 +2179,13 @@ int netif_receive_skb(struct sk_buff *skb) if (!skb->iif) skb->iif = skb->dev->ifindex; + null_or_orig = NULL; orig_dev = skb->dev; if (orig_dev->master) { - if (skb_bond_should_drop(skb)) { - kfree_skb(skb); - return NET_RX_DROP; - } - skb->dev = orig_dev->master; + if (skb_bond_should_drop(skb)) + null_or_orig = orig_dev; /* deliver only exact match */ + else + skb->dev = orig_dev->master; } __get_cpu_var(netdev_rx_stat).total++; @@ -2209,7 +2210,7 @@ int netif_receive_skb(struct sk_buff *skb) #endif list_for_each_entry_rcu(ptype, &ptype_all, list) { - if (!ptype->dev || ptype->dev == skb->dev) { + if (ptype->dev == null_or_orig || ptype->dev == skb->dev) { if (pt_prev) ret = deliver_skb(skb, pt_prev, orig_dev); pt_prev = ptype; @@ -2234,7 +2235,7 @@ ncls: list_for_each_entry_rcu(ptype, &ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) { if (ptype->type == type && - (!ptype->dev || ptype->dev == skb->dev)) { + (ptype->dev == null_or_orig || ptype->dev == skb->dev)) { if (pt_prev) ret = deliver_skb(skb, pt_prev, orig_dev); pt_prev = ptype; -- GitLab From f982307f22db96201e41540295f24e8dcc10c78f Mon Sep 17 00:00:00 2001 From: Joe Eykholt Date: Wed, 2 Jul 2008 18:22:02 -0700 Subject: [PATCH 0971/1024] net/core: Allow receive on active slaves. If a packet_type specifies an active slave to bonding and not just any interface, allow it to receive frames that came in on that interface. Signed-off-by: Joe Eykholt Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- net/core/dev.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index dab97c7cf27..600bb23c4c2 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2210,7 +2210,8 @@ int netif_receive_skb(struct sk_buff *skb) #endif list_for_each_entry_rcu(ptype, &ptype_all, list) { - if (ptype->dev == null_or_orig || ptype->dev == skb->dev) { + if (ptype->dev == null_or_orig || ptype->dev == skb->dev || + ptype->dev == orig_dev) { if (pt_prev) ret = deliver_skb(skb, pt_prev, orig_dev); pt_prev = ptype; @@ -2235,7 +2236,8 @@ ncls: list_for_each_entry_rcu(ptype, &ptype_base[ntohs(type) & PTYPE_HASH_MASK], list) { if (ptype->type == type && - (ptype->dev == null_or_orig || ptype->dev == skb->dev)) { + (ptype->dev == null_or_orig || ptype->dev == skb->dev || + ptype->dev == orig_dev)) { if (pt_prev) ret = deliver_skb(skb, pt_prev, orig_dev); pt_prev = ptype; -- GitLab From e2c709b0ba2886b5438b666222b4b3faf82d65a9 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Mon, 30 Jun 2008 22:09:15 +0200 Subject: [PATCH 0972/1024] WAN: remove extra help text from HDLC_PPP config option MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove extra help text from HDLC_PPP config option. Signed-off-by: Krzysztof Hałasa Signed-off-by: Jeff Garzik --- drivers/net/wan/Kconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 846be60e782..91fb395a94f 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -154,8 +154,6 @@ config HDLC_PPP help Generic HDLC driver supporting PPP over WAN connections. - It will be replaced by new PPP implementation in Linux 2.6.26. - If unsure, say N. config HDLC_X25 -- GitLab From 897d85275d7f061ff0ec838bd5224a9e76ad07d6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Aug 2008 15:04:04 +0100 Subject: [PATCH 0973/1024] [ARM] Fix circular include dependency with IRQ headers Signed-off-by: Russell King --- arch/arm/include/asm/hw_irq.h | 20 +++++++++++++++++++- arch/arm/include/asm/mach/irq.h | 20 -------------------- arch/arm/kernel/irq.c | 1 + 3 files changed, 20 insertions(+), 21 deletions(-) diff --git a/arch/arm/include/asm/hw_irq.h b/arch/arm/include/asm/hw_irq.h index f1a08a50060..90831f6f5f5 100644 --- a/arch/arm/include/asm/hw_irq.h +++ b/arch/arm/include/asm/hw_irq.h @@ -4,6 +4,24 @@ #ifndef _ARCH_ARM_HW_IRQ_H #define _ARCH_ARM_HW_IRQ_H -#include +static inline void ack_bad_irq(int irq) +{ + extern unsigned long irq_err_count; + irq_err_count++; +} + +/* + * Obsolete inline function for calling irq descriptor handlers. + */ +static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc) +{ + desc->handle_irq(irq, desc); +} + +void set_irq_flags(unsigned int irq, unsigned int flags); + +#define IRQF_VALID (1 << 0) +#define IRQF_PROBE (1 << 1) +#define IRQF_NOAUTOEN (1 << 2) #endif diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index c57b52ce574..acac5302e4e 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -21,20 +21,6 @@ extern void (*init_arch_irq)(void); extern void init_FIQ(void); extern int show_fiq_list(struct seq_file *, void *); -/* - * Obsolete inline function for calling irq descriptor handlers. - */ -static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc) -{ - desc->handle_irq(irq, desc); -} - -void set_irq_flags(unsigned int irq, unsigned int flags); - -#define IRQF_VALID (1 << 0) -#define IRQF_PROBE (1 << 1) -#define IRQF_NOAUTOEN (1 << 2) - /* * This is for easy migration, but should be changed in the source */ @@ -45,10 +31,4 @@ do { \ spin_unlock(&desc->lock); \ } while(0) -extern unsigned long irq_err_count; -static inline void ack_bad_irq(int irq) -{ - irq_err_count++; -} - #endif diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 11dcd52e51b..f88efb135b7 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -38,6 +38,7 @@ #include #include +#include #include /* -- GitLab From 0f8469a54f7bd65f2c740a5480c56260dc8a7ae0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Aug 2008 15:06:16 +0100 Subject: [PATCH 0974/1024] [ARM] Eliminate useless includes of asm/mach-types.h There are 43 includes of asm/mach-types.h by files that don't reference anything from that file. Remove these unnecessary includes. Signed-off-by: Russell King --- arch/arm/boot/compressed/head-xscale.S | 1 - arch/arm/common/sharpsl_pm.c | 1 - arch/arm/kernel/head-nommu.S | 1 - arch/arm/mach-at91/clock.c | 1 - arch/arm/mach-at91/irq.c | 1 - arch/arm/mach-at91/leds.c | 1 - arch/arm/mach-at91/pm.c | 1 - arch/arm/mach-iop13xx/irq.c | 1 - arch/arm/mach-iop33x/uart.c | 1 - arch/arm/mach-ixp23xx/core.c | 1 - arch/arm/mach-ixp23xx/pci.c | 1 - arch/arm/mach-ks8695/leds.c | 1 - arch/arm/mach-mx2/clock_imx27.c | 1 - arch/arm/mach-mx2/pcm970-baseboard.c | 1 - arch/arm/mach-ns9xxx/irq.c | 1 - arch/arm/mach-omap1/devices.c | 1 - arch/arm/mach-omap1/pm.c | 1 - arch/arm/mach-omap2/pm.c | 1 - arch/arm/mach-pnx4008/irq.c | 1 - arch/arm/mach-pnx4008/pm.c | 1 - arch/arm/mach-sa1100/collie_pm.c | 1 - arch/arm/plat-iop/i2c.c | 1 - arch/arm/plat-iop/pci.c | 1 - arch/arm/plat-omap/fb.c | 1 - arch/arm/plat-omap/i2c.c | 1 - drivers/i2c/busses/i2c-davinci.c | 1 - drivers/i2c/chips/menelaus.c | 1 - drivers/ide/arm/ide_arm.c | 1 - drivers/input/keyboard/omap-keypad.c | 1 - drivers/input/keyboard/pxa27x_keypad.c | 1 - drivers/leds/leds-corgi.c | 1 - drivers/mmc/host/omap.c | 1 - drivers/net/ixp2000/ixpdev.c | 1 - drivers/usb/gadget/at91_udc.c | 1 - drivers/usb/gadget/s3c2410_udc.c | 1 - drivers/usb/host/ohci-at91.c | 1 - drivers/usb/host/ohci-ep93xx.c | 1 - drivers/usb/host/ohci-pnx4008.c | 1 - drivers/usb/host/ohci-pxa27x.c | 1 - drivers/video/omap/omapfb_main.c | 1 - include/asm-arm/arch-ixp23xx/memory.h | 1 - sound/soc/davinci/davinci-evm.c | 1 - sound/soc/s3c24xx/neo1973_wm8753.c | 1 - 43 files changed, 43 deletions(-) diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index dd3fbd6766e..aa5ee49c5c5 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -6,7 +6,6 @@ */ #include -#include .section ".start", "ax" diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 8822b684d47..7a1f9e3581f 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -27,7 +27,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 5d78ffb8a9a..27329bd3203 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -15,7 +15,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 464bdbbf74d..3ce0012928c 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -24,7 +24,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index ca87587b2b4..fc059ec4b02 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -27,7 +27,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 9cdcda500fe..f064b7acb01 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -13,7 +13,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 8ab4feb1ec5..a5cfe866c9d 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c index 69f07b25b3c..cffd0653078 100644 --- a/arch/arm/mach-iop13xx/irq.c +++ b/arch/arm/mach-iop13xx/irq.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c index ac297cd0276..46318665f0d 100644 --- a/arch/arm/mach-iop33x/uart.c +++ b/arch/arm/mach-iop33x/uart.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #define IOP33X_UART_XTAL 33334000 diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index df16a4eac49..9a1f18ddd3e 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -33,7 +33,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c index 227f808dc0e..db24c43449d 100644 --- a/arch/arm/mach-ixp23xx/pci.c +++ b/arch/arm/mach-ixp23xx/pci.c @@ -31,7 +31,6 @@ #include #include #include -#include #include extern int (*external_fault) (unsigned long, struct pt_regs *); diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c index d61762ae50d..17c5ef13b0d 100644 --- a/arch/arm/mach-ks8695/leds.c +++ b/arch/arm/mach-ks8695/leds.c @@ -12,7 +12,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index 0a29ef29c73..4af6f4f06e8 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -25,7 +25,6 @@ #include #include #include -#include #include "crm_regs.h" diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c index 028ac4d3368..ede77f7e6c1 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -18,7 +18,6 @@ #include #include -#include #include /* diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c index d2964257797..96de8ebed41 100644 --- a/arch/arm/mach-ns9xxx/irq.c +++ b/arch/arm/mach-ns9xxx/irq.c @@ -12,7 +12,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index da8a3ac47e1..88b4b979a8b 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -16,7 +16,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 742f79e73bd..bb06de92dae 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -47,7 +47,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index d6c9de82ca0..5e6e595d8ef 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c index 5ed67e1947a..a3e20058e27 100644 --- a/arch/arm/mach-pnx4008/irq.c +++ b/arch/arm/mach-pnx4008/irq.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c index 40116d25434..52c51f91ed8 100644 --- a/arch/arm/mach-pnx4008/pm.c +++ b/arch/arm/mach-pnx4008/pm.c @@ -20,7 +20,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c index 94620be7bfa..26ddb8ad468 100644 --- a/arch/arm/mach-sa1100/collie_pm.c +++ b/arch/arm/mach-sa1100/collie_pm.c @@ -24,7 +24,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c index e99909bdba7..dad474c1516 100644 --- a/arch/arm/plat-iop/i2c.c +++ b/arch/arm/plat-iop/i2c.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #ifdef CONFIG_ARCH_IOP32X diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index d9bc15a69e5..06f114a2568 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -24,7 +24,6 @@ #include #include #include -#include // #define DEBUG diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 5d107520e6b..52002ac58ba 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -30,7 +30,6 @@ #include #include -#include #include #include diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 7990ab185bb..647ed5971c6 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #define OMAP_I2C_SIZE 0x3f diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index af3846eda98..4f427a51243 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -37,7 +37,6 @@ #include #include -#include #include diff --git a/drivers/i2c/chips/menelaus.c b/drivers/i2c/chips/menelaus.c index b36db1797c1..e3c12e365c4 100644 --- a/drivers/i2c/chips/menelaus.c +++ b/drivers/i2c/chips/menelaus.c @@ -41,7 +41,6 @@ #include #include -#include #include #include diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c index 176532ffae0..8a3bb23f8ae 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c @@ -11,7 +11,6 @@ #include #include -#include #include #define DRV_NAME "ide_arm" diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 10afd206806..435ac071aab 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #undef NEW_BOARD_LEARNING_MODE diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 6f1516f5075..8a925359d82 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -26,7 +26,6 @@ #include #include -#include #include #include diff --git a/drivers/leds/leds-corgi.c b/drivers/leds/leds-corgi.c index a709704b9f9..e9d419ff784 100644 --- a/drivers/leds/leds-corgi.c +++ b/drivers/leds/leds-corgi.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index dbc26eb6a89..1f587a239b0 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -29,7 +29,6 @@ #include #include -#include #include #include diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c index 7111c65f0b3..7b70c66504a 100644 --- a/drivers/net/ixp2000/ixpdev.c +++ b/drivers/net/ixp2000/ixpdev.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include "ixp2400_rx.ucode" #include "ixp2400_tx.ucode" diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index e2d8a5d86c4..895fb6b96ae 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -44,7 +44,6 @@ #include #include #include -#include #include #include diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 6b1ef488043..021955a5772 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -57,7 +57,6 @@ #include #include -#include #include "s3c2410_udc.h" diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index a5d8e550d89..3eae40f8743 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -15,7 +15,6 @@ #include #include -#include #include #include diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index 5adaf36e47d..e19b07d35ea 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -28,7 +28,6 @@ #include #include -#include #include static struct clk *usb_host_clock; diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c index 6ad8f2fc57b..037956a60bf 100644 --- a/drivers/usb/host/ohci-pnx4008.c +++ b/drivers/usb/host/ohci-pnx4008.c @@ -23,7 +23,6 @@ #include #include -#include #include #include diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 127b1579902..1f516d6cf51 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -24,7 +24,6 @@ #include #include -#include #include #include #include /* FIXME: for PSSR */ diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index f85af5c4fa6..d9abc48a210 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -28,7 +28,6 @@ #include #include -#include #include #include diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h index 6d859d742d7..6940a14f32a 100644 --- a/include/asm-arm/arch-ixp23xx/memory.h +++ b/include/asm-arm/arch-ixp23xx/memory.h @@ -28,7 +28,6 @@ * to an address that the kernel can use. */ #ifndef __ASSEMBLY__ -#include #define __virt_to_bus(v) \ ({ unsigned int ret; \ diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c index 5e2c306399e..0722eebe3d6 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/davinci/davinci-evm.c @@ -19,7 +19,6 @@ #include #include -#include #include #include diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c index 4d7a9aa15f1..22e281ef639 100644 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_wm8753.c @@ -24,7 +24,6 @@ #include #include -#include #include #include #include -- GitLab From be509729356b7433f73df2b9a966674a437fbbc1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 4 Aug 2008 10:41:28 +0100 Subject: [PATCH 0975/1024] [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King --- arch/arm/common/locomo.c | 2 +- arch/arm/common/sa1111.c | 2 +- arch/arm/common/sharpsl_pm.c | 2 +- arch/arm/common/time-acorn.c | 2 +- arch/arm/common/uengine.c | 1 - arch/arm/include/asm/hardware.h | 18 ------------------ arch/arm/include/asm/hardware/dec21285.h | 2 +- arch/arm/include/asm/hardware/iop3xx-adma.h | 2 +- arch/arm/include/asm/hardware/iop3xx-gpio.h | 2 +- arch/arm/include/asm/mtd-xip.h | 2 +- arch/arm/include/asm/pci.h | 2 +- arch/arm/include/asm/vga.h | 2 +- arch/arm/kernel/ecard.c | 2 +- arch/arm/lib/ecard.S | 2 +- arch/arm/lib/io-readsw-armv3.S | 2 +- arch/arm/lib/io-writesw-armv3.S | 2 +- arch/arm/mach-aaec2000/aaed2000.c | 2 +- arch/arm/mach-aaec2000/core.c | 2 +- arch/arm/mach-at91/at91x40_time.c | 2 +- arch/arm/mach-at91/board-1arm.c | 2 +- arch/arm/mach-at91/board-cam60.c | 2 +- arch/arm/mach-at91/board-cap9adk.c | 2 +- arch/arm/mach-at91/board-carmeva.c | 2 +- arch/arm/mach-at91/board-csb337.c | 2 +- arch/arm/mach-at91/board-csb637.c | 2 +- arch/arm/mach-at91/board-dk.c | 2 +- arch/arm/mach-at91/board-eb01.c | 2 +- arch/arm/mach-at91/board-eb9200.c | 2 +- arch/arm/mach-at91/board-ecbat91.c | 2 +- arch/arm/mach-at91/board-ek.c | 2 +- arch/arm/mach-at91/board-kafa.c | 2 +- arch/arm/mach-at91/board-kb9202.c | 2 +- arch/arm/mach-at91/board-picotux200.c | 2 +- arch/arm/mach-at91/board-qil-a9260.c | 2 +- arch/arm/mach-at91/board-sam9-l9260.c | 2 +- arch/arm/mach-at91/board-sam9260ek.c | 2 +- arch/arm/mach-at91/board-sam9261ek.c | 2 +- arch/arm/mach-at91/board-sam9263ek.c | 2 +- arch/arm/mach-at91/board-sam9g20ek.c | 2 +- arch/arm/mach-at91/board-sam9rlek.c | 2 +- arch/arm/mach-at91/board-usb-a9260.c | 2 +- arch/arm/mach-at91/board-usb-a9263.c | 2 +- arch/arm/mach-at91/board-yl-9200.c | 2 +- arch/arm/mach-at91/clock.c | 2 +- arch/arm/mach-at91/gpio.c | 2 +- arch/arm/mach-at91/irq.c | 2 +- arch/arm/mach-clps711x/autcpu12.c | 2 +- arch/arm/mach-clps711x/cdb89712.c | 2 +- arch/arm/mach-clps711x/ceiva.c | 2 +- arch/arm/mach-clps711x/edb7211-mm.c | 2 +- arch/arm/mach-clps711x/fortunet.c | 2 +- arch/arm/mach-clps711x/irq.c | 2 +- arch/arm/mach-clps711x/mm.c | 2 +- arch/arm/mach-clps711x/p720t-leds.c | 2 +- arch/arm/mach-clps711x/p720t.c | 2 +- arch/arm/mach-clps711x/time.c | 2 +- arch/arm/mach-clps7500/core.c | 2 +- arch/arm/mach-davinci/board-evm.c | 2 +- arch/arm/mach-davinci/clock.c | 2 +- arch/arm/mach-davinci/irq.c | 2 +- arch/arm/mach-davinci/mux.c | 2 +- arch/arm/mach-davinci/psc.c | 2 +- arch/arm/mach-davinci/serial.c | 2 +- arch/arm/mach-davinci/time.c | 2 +- arch/arm/mach-ebsa110/core.c | 2 +- arch/arm/mach-ebsa110/io.c | 2 +- arch/arm/mach-ebsa110/leds.c | 2 +- arch/arm/mach-ep93xx/adssphere.c | 2 +- arch/arm/mach-ep93xx/clock.c | 2 +- arch/arm/mach-ep93xx/core.c | 2 +- arch/arm/mach-ep93xx/edb9302.c | 2 +- arch/arm/mach-ep93xx/edb9302a.c | 2 +- arch/arm/mach-ep93xx/edb9307.c | 2 +- arch/arm/mach-ep93xx/edb9312.c | 2 +- arch/arm/mach-ep93xx/edb9315.c | 2 +- arch/arm/mach-ep93xx/edb9315a.c | 2 +- arch/arm/mach-ep93xx/gesbc9312.c | 2 +- arch/arm/mach-ep93xx/micro9.c | 2 +- arch/arm/mach-ep93xx/ts72xx.c | 2 +- arch/arm/mach-footbridge/ebsa285-leds.c | 2 +- arch/arm/mach-footbridge/isa-irq.c | 2 +- arch/arm/mach-footbridge/netwinder-leds.c | 2 +- arch/arm/mach-footbridge/time.c | 2 +- arch/arm/mach-h720x/common.c | 2 +- arch/arm/mach-h720x/cpu-h7201.c | 2 +- arch/arm/mach-h720x/cpu-h7202.c | 2 +- arch/arm/mach-h720x/h7201-eval.c | 2 +- arch/arm/mach-h720x/h7202-eval.c | 2 +- arch/arm/mach-imx/cpufreq.c | 2 +- arch/arm/mach-imx/dma.c | 2 +- arch/arm/mach-imx/generic.c | 2 +- arch/arm/mach-imx/irq.c | 2 +- arch/arm/mach-imx/leds-mx1ads.c | 2 +- arch/arm/mach-imx/mx1ads.c | 2 +- arch/arm/mach-imx/time.c | 2 +- arch/arm/mach-integrator/core.c | 2 +- arch/arm/mach-integrator/cpu.c | 2 +- arch/arm/mach-integrator/integrator_ap.c | 2 +- arch/arm/mach-integrator/integrator_cp.c | 2 +- arch/arm/mach-integrator/leds.c | 2 +- arch/arm/mach-integrator/pci_v3.c | 2 +- arch/arm/mach-iop13xx/io.c | 2 +- arch/arm/mach-iop13xx/iq81340mc.c | 2 +- arch/arm/mach-iop13xx/iq81340sc.c | 2 +- arch/arm/mach-iop13xx/irq.c | 2 +- arch/arm/mach-iop13xx/pci.c | 2 +- arch/arm/mach-iop13xx/setup.c | 2 +- arch/arm/mach-iop32x/em7210.c | 2 +- arch/arm/mach-iop32x/glantank.c | 2 +- arch/arm/mach-iop32x/iq31244.c | 2 +- arch/arm/mach-iop32x/iq80321.c | 2 +- arch/arm/mach-iop32x/irq.c | 2 +- arch/arm/mach-iop32x/n2100.c | 2 +- arch/arm/mach-iop33x/iq80331.c | 2 +- arch/arm/mach-iop33x/iq80332.c | 2 +- arch/arm/mach-iop33x/irq.c | 2 +- arch/arm/mach-iop33x/uart.c | 2 +- arch/arm/mach-ixp2000/core.c | 2 +- arch/arm/mach-ixp2000/enp2611.c | 2 +- arch/arm/mach-ixp2000/ixdp2400.c | 2 +- arch/arm/mach-ixp2000/ixdp2800.c | 2 +- arch/arm/mach-ixp2000/ixdp2x00.c | 2 +- arch/arm/mach-ixp2000/ixdp2x01.c | 2 +- arch/arm/mach-ixp2000/pci.c | 2 +- arch/arm/mach-ixp23xx/core.c | 2 +- arch/arm/mach-ixp23xx/espresso.c | 2 +- arch/arm/mach-ixp23xx/ixdp2351.c | 2 +- arch/arm/mach-ixp23xx/pci.c | 2 +- arch/arm/mach-ixp23xx/roadrunner.c | 2 +- arch/arm/mach-ixp4xx/avila-pci.c | 2 +- arch/arm/mach-ixp4xx/avila-setup.c | 2 +- arch/arm/mach-ixp4xx/common-pci.c | 2 +- arch/arm/mach-ixp4xx/common.c | 2 +- arch/arm/mach-ixp4xx/coyote-pci.c | 2 +- arch/arm/mach-ixp4xx/coyote-setup.c | 2 +- arch/arm/mach-ixp4xx/gateway7001-pci.c | 2 +- arch/arm/mach-ixp4xx/gateway7001-setup.c | 2 +- arch/arm/mach-ixp4xx/gtwx5715-pci.c | 2 +- arch/arm/mach-ixp4xx/gtwx5715-setup.c | 2 +- arch/arm/mach-ixp4xx/ixdp425-pci.c | 2 +- arch/arm/mach-ixp4xx/ixdp425-setup.c | 2 +- arch/arm/mach-ixp4xx/ixdpg425-pci.c | 2 +- arch/arm/mach-ixp4xx/wg302v2-pci.c | 2 +- arch/arm/mach-ixp4xx/wg302v2-setup.c | 2 +- arch/arm/mach-kirkwood/addr-map.c | 2 +- arch/arm/mach-ks8695/cpu.c | 2 +- arch/arm/mach-ks8695/gpio.c | 2 +- arch/arm/mach-ks8695/irq.c | 2 +- arch/arm/mach-ks8695/pci.c | 2 +- arch/arm/mach-l7200/core.c | 2 +- arch/arm/mach-lh7a40x/arch-kev7a400.c | 2 +- arch/arm/mach-lh7a40x/arch-lpd7a40x.c | 2 +- arch/arm/mach-lh7a40x/clcd.c | 3 +-- arch/arm/mach-lh7a40x/clocks.c | 2 +- arch/arm/mach-lh7a40x/irq-lh7a400.c | 2 +- arch/arm/mach-lh7a40x/irq-lh7a404.c | 2 +- arch/arm/mach-lh7a40x/irq-lpd7a40x.c | 2 +- arch/arm/mach-lh7a40x/ssp-cpld.c | 2 +- arch/arm/mach-lh7a40x/time.c | 2 +- arch/arm/mach-loki/addr-map.c | 2 +- arch/arm/mach-msm/board-halibut.c | 2 +- arch/arm/mach-msm/io.c | 2 +- arch/arm/mach-msm/irq.c | 2 +- arch/arm/mach-mx2/cpu_imx27.c | 2 +- arch/arm/mach-mx2/devices.c | 2 +- arch/arm/mach-mx2/generic.c | 2 +- arch/arm/mach-mx2/mx27ads.c | 2 +- arch/arm/mach-mx2/pcm038.c | 2 +- arch/arm/mach-mx2/pcm970-baseboard.c | 2 +- arch/arm/mach-mx2/serial.c | 2 +- arch/arm/mach-mx3/devices.c | 2 +- arch/arm/mach-mx3/iomux.c | 2 +- arch/arm/mach-mx3/mm.c | 2 +- arch/arm/mach-mx3/mx31ads.c | 2 +- arch/arm/mach-mx3/mx31lite.c | 2 +- arch/arm/mach-mx3/pcm037.c | 2 +- arch/arm/mach-netx/fb.c | 2 +- arch/arm/mach-netx/generic.c | 2 +- arch/arm/mach-netx/nxdb500.c | 2 +- arch/arm/mach-netx/nxdkn.c | 2 +- arch/arm/mach-netx/nxeb500hmi.c | 2 +- arch/arm/mach-netx/pfifo.c | 2 +- arch/arm/mach-netx/time.c | 2 +- arch/arm/mach-netx/xc.c | 2 +- arch/arm/mach-omap1/board-ams-delta.c | 2 +- arch/arm/mach-omap1/board-fsample.c | 2 +- arch/arm/mach-omap1/board-generic.c | 2 +- arch/arm/mach-omap1/board-h2.c | 2 +- arch/arm/mach-omap1/board-h3.c | 2 +- arch/arm/mach-omap1/board-innovator.c | 2 +- arch/arm/mach-omap1/board-nokia770.c | 2 +- arch/arm/mach-omap1/board-osk.c | 2 +- arch/arm/mach-omap1/board-palmte.c | 2 +- arch/arm/mach-omap1/board-palmtt.c | 2 +- arch/arm/mach-omap1/board-palmz71.c | 2 +- arch/arm/mach-omap1/board-perseus2.c | 2 +- arch/arm/mach-omap1/board-sx1.c | 2 +- arch/arm/mach-omap1/board-voiceblue.c | 2 +- arch/arm/mach-omap1/devices.c | 2 +- arch/arm/mach-omap1/fpga.c | 2 +- arch/arm/mach-omap1/irq.c | 2 +- arch/arm/mach-omap1/leds-h2p2-debug.c | 2 +- arch/arm/mach-omap1/leds-innovator.c | 2 +- arch/arm/mach-omap1/leds-osk.c | 2 +- arch/arm/mach-omap1/sram.S | 2 +- arch/arm/mach-omap1/time.c | 2 +- arch/arm/mach-omap1/timer32k.c | 2 +- arch/arm/mach-omap2/board-2430sdp.c | 2 +- arch/arm/mach-omap2/board-apollon.c | 2 +- arch/arm/mach-omap2/board-generic.c | 2 +- arch/arm/mach-omap2/board-h4.c | 2 +- arch/arm/mach-omap2/devices.c | 2 +- arch/arm/mach-omap2/irq.c | 2 +- arch/arm/mach-omap2/sram242x.S | 2 +- arch/arm/mach-omap2/sram243x.S | 2 +- arch/arm/mach-orion5x/addr-map.c | 2 +- arch/arm/mach-orion5x/mpp.c | 2 +- arch/arm/mach-pnx4008/clock.c | 2 +- arch/arm/mach-pnx4008/core.c | 2 +- arch/arm/mach-pnx4008/dma.c | 2 +- arch/arm/mach-pnx4008/irq.c | 2 +- arch/arm/mach-pnx4008/serial.c | 2 +- arch/arm/mach-pnx4008/sleep.S | 2 +- arch/arm/mach-pnx4008/time.c | 2 +- arch/arm/mach-pxa/clock.c | 2 +- arch/arm/mach-pxa/colibri.c | 2 +- arch/arm/mach-pxa/corgi.c | 2 +- arch/arm/mach-pxa/corgi_lcd.c | 2 +- arch/arm/mach-pxa/corgi_pm.c | 2 +- arch/arm/mach-pxa/corgi_ssp.c | 2 +- arch/arm/mach-pxa/cpu-pxa.c | 2 +- arch/arm/mach-pxa/dma.c | 2 +- arch/arm/mach-pxa/generic.c | 2 +- arch/arm/mach-pxa/gpio.c | 2 +- arch/arm/mach-pxa/gumstix.c | 2 +- arch/arm/mach-pxa/idp.c | 2 +- arch/arm/mach-pxa/irq.c | 2 +- arch/arm/mach-pxa/leds-idp.c | 2 +- arch/arm/mach-pxa/leds-lubbock.c | 2 +- arch/arm/mach-pxa/leds-mainstone.c | 2 +- arch/arm/mach-pxa/leds-trizeps4.c | 2 +- arch/arm/mach-pxa/littleton.c | 2 +- arch/arm/mach-pxa/lpd270.c | 2 +- arch/arm/mach-pxa/lubbock.c | 2 +- arch/arm/mach-pxa/magician.c | 2 +- arch/arm/mach-pxa/mainstone.c | 2 +- arch/arm/mach-pxa/mfp-pxa3xx.c | 2 +- arch/arm/mach-pxa/pm.c | 2 +- arch/arm/mach-pxa/poodle.c | 2 +- arch/arm/mach-pxa/pxa25x.c | 2 +- arch/arm/mach-pxa/pxa27x.c | 2 +- arch/arm/mach-pxa/pxa300.c | 2 +- arch/arm/mach-pxa/pxa320.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 2 +- arch/arm/mach-pxa/pxa930.c | 2 +- arch/arm/mach-pxa/saar.c | 2 +- arch/arm/mach-pxa/sharpsl_pm.c | 2 +- arch/arm/mach-pxa/sleep.S | 2 +- arch/arm/mach-pxa/spitz.c | 2 +- arch/arm/mach-pxa/spitz_pm.c | 2 +- arch/arm/mach-pxa/ssp.c | 2 +- arch/arm/mach-pxa/standby.S | 2 +- arch/arm/mach-pxa/tavorevb.c | 2 +- arch/arm/mach-pxa/trizeps4.c | 2 +- arch/arm/mach-pxa/zylonite.c | 2 +- arch/arm/mach-realview/core.c | 2 +- arch/arm/mach-realview/localtimer.c | 2 +- arch/arm/mach-realview/platsmp.c | 2 +- arch/arm/mach-realview/realview_eb.c | 2 +- arch/arm/mach-realview/realview_pb1176.c | 2 +- arch/arm/mach-realview/realview_pb11mp.c | 2 +- arch/arm/mach-rpc/dma.c | 2 +- arch/arm/mach-rpc/riscpc.c | 2 +- arch/arm/mach-s3c2400/gpio.c | 2 +- arch/arm/mach-s3c2410/bast-irq.c | 2 +- arch/arm/mach-s3c2410/clock.c | 2 +- arch/arm/mach-s3c2410/gpio.c | 2 +- arch/arm/mach-s3c2410/h1940-bluetooth.c | 2 +- arch/arm/mach-s3c2410/mach-amlm5900.c | 2 +- arch/arm/mach-s3c2410/mach-bast.c | 2 +- arch/arm/mach-s3c2410/mach-h1940.c | 2 +- arch/arm/mach-s3c2410/mach-n30.c | 2 +- arch/arm/mach-s3c2410/mach-otom.c | 2 +- arch/arm/mach-s3c2410/mach-qt2410.c | 2 +- arch/arm/mach-s3c2410/mach-smdk2410.c | 2 +- arch/arm/mach-s3c2410/mach-tct_hammer.c | 2 +- arch/arm/mach-s3c2410/mach-vr1000.c | 2 +- arch/arm/mach-s3c2410/pm-h1940.S | 2 +- arch/arm/mach-s3c2410/pm.c | 2 +- arch/arm/mach-s3c2410/s3c2410.c | 2 +- arch/arm/mach-s3c2410/sleep.S | 2 +- arch/arm/mach-s3c2410/usb-simtec.c | 2 +- arch/arm/mach-s3c2412/clock.c | 2 +- arch/arm/mach-s3c2412/gpio.c | 2 +- arch/arm/mach-s3c2412/irq.c | 2 +- arch/arm/mach-s3c2412/mach-smdk2413.c | 2 +- arch/arm/mach-s3c2412/mach-vstms.c | 2 +- arch/arm/mach-s3c2412/pm.c | 2 +- arch/arm/mach-s3c2412/s3c2412.c | 2 +- arch/arm/mach-s3c2412/sleep.S | 2 +- arch/arm/mach-s3c2440/clock.c | 2 +- arch/arm/mach-s3c2440/dsc.c | 2 +- arch/arm/mach-s3c2440/irq.c | 2 +- arch/arm/mach-s3c2440/mach-anubis.c | 2 +- arch/arm/mach-s3c2440/mach-at2440evb.c | 2 +- arch/arm/mach-s3c2440/mach-nexcoder.c | 2 +- arch/arm/mach-s3c2440/mach-osiris.c | 2 +- arch/arm/mach-s3c2440/mach-rx3715.c | 2 +- arch/arm/mach-s3c2440/mach-smdk2440.c | 2 +- arch/arm/mach-s3c2440/s3c2440.c | 2 +- arch/arm/mach-s3c2442/clock.c | 2 +- arch/arm/mach-s3c2443/clock.c | 2 +- arch/arm/mach-s3c2443/irq.c | 2 +- arch/arm/mach-s3c2443/mach-smdk2443.c | 2 +- arch/arm/mach-s3c2443/s3c2443.c | 2 +- arch/arm/mach-sa1100/assabet.c | 2 +- arch/arm/mach-sa1100/badge4.c | 2 +- arch/arm/mach-sa1100/cerf.c | 2 +- arch/arm/mach-sa1100/clock.c | 2 +- arch/arm/mach-sa1100/collie.c | 2 +- arch/arm/mach-sa1100/collie_pm.c | 2 +- arch/arm/mach-sa1100/cpu-sa1100.c | 2 +- arch/arm/mach-sa1100/cpu-sa1110.c | 2 +- arch/arm/mach-sa1100/dma.c | 2 +- arch/arm/mach-sa1100/generic.c | 2 +- arch/arm/mach-sa1100/gpio.c | 2 +- arch/arm/mach-sa1100/h3600.c | 2 +- arch/arm/mach-sa1100/hackkit.c | 2 +- arch/arm/mach-sa1100/irq.c | 2 +- arch/arm/mach-sa1100/jornada720.c | 2 +- arch/arm/mach-sa1100/jornada720_ssp.c | 2 +- arch/arm/mach-sa1100/lart.c | 2 +- arch/arm/mach-sa1100/leds-assabet.c | 2 +- arch/arm/mach-sa1100/leds-badge4.c | 2 +- arch/arm/mach-sa1100/leds-cerf.c | 2 +- arch/arm/mach-sa1100/leds-hackkit.c | 2 +- arch/arm/mach-sa1100/leds-lart.c | 2 +- arch/arm/mach-sa1100/leds-simpad.c | 2 +- arch/arm/mach-sa1100/neponset.c | 2 +- arch/arm/mach-sa1100/pleb.c | 2 +- arch/arm/mach-sa1100/pm.c | 2 +- arch/arm/mach-sa1100/shannon.c | 2 +- arch/arm/mach-sa1100/simpad.c | 2 +- arch/arm/mach-sa1100/sleep.S | 2 +- arch/arm/mach-sa1100/ssp.c | 2 +- arch/arm/mach-sa1100/time.c | 2 +- arch/arm/mach-shark/leds.c | 2 +- arch/arm/mach-versatile/core.c | 2 +- arch/arm/mach-versatile/pci.c | 2 +- arch/arm/mach-versatile/versatile_ab.c | 2 +- arch/arm/mach-versatile/versatile_pb.c | 2 +- arch/arm/mm/cache-v3.S | 2 +- arch/arm/mm/cache-v4.S | 2 +- arch/arm/mm/cache-v4wt.S | 2 +- arch/arm/mm/proc-sa110.S | 2 +- arch/arm/mm/proc-sa1100.S | 2 +- arch/arm/mm/proc-xsc3.S | 2 +- arch/arm/oprofile/op_model_mpcore.c | 2 +- arch/arm/plat-iop/i2c.c | 2 +- arch/arm/plat-iop/io.c | 2 +- arch/arm/plat-iop/pci.c | 2 +- arch/arm/plat-iop/time.c | 2 +- arch/arm/plat-mxc/gpio.c | 2 +- arch/arm/plat-mxc/iomux-mx1-mx2.c | 2 +- arch/arm/plat-mxc/time.c | 2 +- arch/arm/plat-omap/common.c | 2 +- arch/arm/plat-omap/cpu-omap.c | 2 +- arch/arm/plat-omap/debug-devices.c | 2 +- arch/arm/plat-omap/debug-leds.c | 2 +- arch/arm/plat-omap/devices.c | 2 +- arch/arm/plat-omap/dma.c | 2 +- arch/arm/plat-omap/dmtimer.c | 2 +- arch/arm/plat-omap/fb.c | 2 +- arch/arm/plat-omap/gpio.c | 2 +- arch/arm/plat-omap/ocpi.c | 2 +- arch/arm/plat-omap/usb.c | 2 +- arch/arm/plat-s3c24xx/clock.c | 2 +- arch/arm/plat-s3c24xx/common-smdk.c | 2 +- arch/arm/plat-s3c24xx/cpu.c | 2 +- arch/arm/plat-s3c24xx/devs.c | 2 +- arch/arm/plat-s3c24xx/dma.c | 2 +- arch/arm/plat-s3c24xx/gpio.c | 2 +- arch/arm/plat-s3c24xx/gpiolib.c | 2 +- arch/arm/plat-s3c24xx/irq.c | 2 +- arch/arm/plat-s3c24xx/pm-simtec.c | 2 +- arch/arm/plat-s3c24xx/pm.c | 2 +- arch/arm/plat-s3c24xx/pwm-clock.c | 2 +- arch/arm/plat-s3c24xx/s3c244x-clock.c | 2 +- arch/arm/plat-s3c24xx/s3c244x-irq.c | 2 +- arch/arm/plat-s3c24xx/s3c244x.c | 2 +- arch/arm/plat-s3c24xx/sleep.S | 2 +- drivers/char/ds1620.c | 2 +- drivers/char/hw_random/ixp4xx-rng.c | 2 +- drivers/i2c/busses/i2c-acorn.c | 2 +- drivers/i2c/busses/i2c-davinci.c | 2 +- drivers/i2c/busses/i2c-ixp2000.c | 2 +- drivers/i2c/busses/i2c-pnx.c | 2 +- drivers/i2c/busses/i2c-pxa.c | 2 +- drivers/i2c/busses/i2c-s3c2410.c | 2 +- drivers/input/keyboard/jornada720_kbd.c | 2 +- drivers/input/keyboard/omap-keypad.c | 2 +- drivers/input/misc/ixp4xx-beeper.c | 2 +- drivers/input/mouse/rpcmouse.c | 2 +- drivers/input/serio/rpckbd.c | 2 +- drivers/input/touchscreen/jornada720_ts.c | 2 +- drivers/leds/leds-h1940.c | 2 +- drivers/leds/leds-locomo.c | 2 +- drivers/leds/leds-s3c24xx.c | 2 +- drivers/mfd/mcp-sa11x0.c | 2 +- drivers/mfd/ucb1x00-core.c | 2 +- drivers/mtd/maps/autcpu12-nvram.c | 2 +- drivers/mtd/maps/ceiva.c | 2 +- drivers/mtd/maps/h720x-flash.c | 2 +- drivers/mtd/maps/integrator-flash.c | 2 +- drivers/mtd/maps/ipaq-flash.c | 2 +- drivers/mtd/maps/ixp2000.c | 2 +- drivers/mtd/maps/omap_nor.c | 2 +- drivers/mtd/maps/pxa2xx-flash.c | 2 +- drivers/mtd/maps/sa1100-flash.c | 2 +- drivers/mtd/nand/sharpsl.c | 2 +- drivers/net/arm/am79c961a.c | 2 +- drivers/net/irda/ep7211-sir.c | 2 +- drivers/net/irda/sa1100_ir.c | 2 +- drivers/net/ixp2000/ixp2400-msf.c | 2 +- drivers/net/netx-eth.c | 1 - drivers/pcmcia/at91_cf.c | 2 +- drivers/pcmcia/omap_cf.c | 2 +- drivers/pcmcia/pxa2xx_base.c | 2 +- drivers/pcmcia/pxa2xx_lubbock.c | 2 +- drivers/pcmcia/pxa2xx_mainstone.c | 2 +- drivers/pcmcia/pxa2xx_sharpsl.c | 2 +- drivers/pcmcia/sa1100_assabet.c | 2 +- drivers/pcmcia/sa1100_badge4.c | 2 +- drivers/pcmcia/sa1100_cerf.c | 2 +- drivers/pcmcia/sa1100_h3600.c | 2 +- drivers/pcmcia/sa1100_jornada720.c | 2 +- drivers/pcmcia/sa1100_neponset.c | 2 +- drivers/pcmcia/sa1100_shannon.c | 2 +- drivers/pcmcia/sa1100_simpad.c | 2 +- drivers/pcmcia/sa1111_generic.c | 2 +- drivers/pcmcia/sa11xx_base.c | 2 +- drivers/pcmcia/soc_common.c | 2 +- drivers/rtc/rtc-ep93xx.c | 2 +- drivers/rtc/rtc-s3c.c | 2 +- drivers/rtc/rtc-sa1100.c | 2 +- drivers/scsi/arm/acornscsi-io.S | 2 +- drivers/serial/21285.c | 2 +- drivers/serial/clps711x.c | 2 +- drivers/serial/imx.c | 2 +- drivers/serial/netx-serial.c | 2 +- drivers/serial/pxa.c | 2 +- drivers/serial/s3c2400.c | 2 +- drivers/serial/s3c2410.c | 2 +- drivers/serial/s3c2412.c | 2 +- drivers/serial/s3c2440.c | 2 +- drivers/serial/sa1100.c | 2 +- drivers/serial/samsung.c | 2 +- drivers/spi/omap_uwire.c | 2 +- drivers/spi/pxa2xx_spi.c | 1 - drivers/spi/spi_imx.c | 1 - drivers/spi/spi_s3c24xx.c | 2 +- drivers/spi/spi_s3c24xx_gpio.c | 2 +- drivers/usb/gadget/at91_udc.c | 2 +- drivers/usb/gadget/lh7a40x_udc.h | 2 +- drivers/usb/gadget/pxa27x_udc.c | 2 +- drivers/usb/host/ohci-at91.c | 2 +- drivers/usb/host/ohci-ep93xx.c | 2 +- drivers/usb/host/ohci-lh7a404.c | 2 +- drivers/usb/host/ohci-omap.c | 2 +- drivers/usb/host/ohci-pnx4008.c | 2 +- drivers/usb/host/ohci-pxa27x.c | 2 +- drivers/usb/host/ohci-s3c2410.c | 2 +- drivers/usb/host/ohci-sa1111.c | 2 +- drivers/video/acornfb.c | 2 +- drivers/video/clps711xfb.c | 2 +- drivers/video/imxfb.c | 2 +- drivers/video/pxafb.c | 2 +- drivers/video/sa1100fb.c | 2 +- drivers/watchdog/davinci_wdt.c | 2 +- drivers/watchdog/ep93xx_wdt.c | 2 +- drivers/watchdog/iop_wdt.c | 2 +- drivers/watchdog/ixp2000_wdt.c | 2 +- drivers/watchdog/ixp4xx_wdt.c | 2 +- drivers/watchdog/omap_wdt.c | 2 +- drivers/watchdog/pnx4008_wdt.c | 2 +- drivers/watchdog/sa1100_wdt.c | 2 +- drivers/watchdog/wdt285.c | 2 +- include/asm-arm/arch-aaec2000/io.h | 2 +- include/asm-arm/arch-at91/cpu.h | 2 +- include/asm-arm/arch-at91/debug-macro.S | 2 +- include/asm-arm/arch-at91/entry-macro.S | 2 +- include/asm-arm/arch-at91/memory.h | 2 +- include/asm-arm/arch-at91/system.h | 2 +- include/asm-arm/arch-at91/timex.h | 2 +- include/asm-arm/arch-cl7500/entry-macro.S | 2 +- include/asm-arm/arch-cl7500/io.h | 2 +- include/asm-arm/arch-clps711x/entry-macro.S | 2 +- include/asm-arm/arch-clps711x/io.h | 2 +- include/asm-arm/arch-clps711x/system.h | 2 +- include/asm-arm/arch-clps711x/uncompress.h | 2 +- include/asm-arm/arch-davinci/gpio.h | 2 +- include/asm-arm/arch-davinci/system.h | 2 +- include/asm-arm/arch-ebsa285/entry-macro.S | 2 +- include/asm-arm/arch-ebsa285/io.h | 2 +- include/asm-arm/arch-ebsa285/system.h | 2 +- include/asm-arm/arch-ep93xx/hardware.h | 4 ++++ include/asm-arm/arch-ep93xx/system.h | 2 +- include/asm-arm/arch-h720x/io.h | 2 +- include/asm-arm/arch-h720x/system.h | 2 +- include/asm-arm/arch-h720x/uncompress.h | 2 +- include/asm-arm/arch-imx/entry-macro.S | 2 +- include/asm-arm/arch-imx/io.h | 2 +- include/asm-arm/arch-imx/irqs.h | 2 +- include/asm-arm/arch-integrator/entry-macro.S | 2 +- include/asm-arm/arch-iop13xx/adma.h | 2 +- include/asm-arm/arch-iop13xx/timex.h | 2 +- include/asm-arm/arch-iop13xx/uncompress.h | 2 +- include/asm-arm/arch-iop32x/io.h | 2 +- include/asm-arm/arch-iop32x/memory.h | 2 +- include/asm-arm/arch-iop32x/timex.h | 2 +- include/asm-arm/arch-iop32x/uncompress.h | 2 +- include/asm-arm/arch-iop33x/io.h | 2 +- include/asm-arm/arch-iop33x/memory.h | 2 +- include/asm-arm/arch-iop33x/timex.h | 2 +- include/asm-arm/arch-iop33x/uncompress.h | 2 +- include/asm-arm/arch-ixp2000/io.h | 2 +- include/asm-arm/arch-ixp2000/system.h | 2 +- include/asm-arm/arch-ixp23xx/memory.h | 2 +- include/asm-arm/arch-ixp23xx/system.h | 2 +- include/asm-arm/arch-ixp4xx/avila.h | 2 +- include/asm-arm/arch-ixp4xx/coyote.h | 2 +- include/asm-arm/arch-ixp4xx/dma.h | 2 +- include/asm-arm/arch-ixp4xx/dsmg600.h | 2 +- include/asm-arm/arch-ixp4xx/entry-macro.S | 2 +- include/asm-arm/arch-ixp4xx/fsg.h | 2 +- include/asm-arm/arch-ixp4xx/gpio.h | 2 +- include/asm-arm/arch-ixp4xx/gtwx5715.h | 2 +- include/asm-arm/arch-ixp4xx/io.h | 2 +- include/asm-arm/arch-ixp4xx/ixdp425.h | 2 +- include/asm-arm/arch-ixp4xx/nas100d.h | 2 +- include/asm-arm/arch-ixp4xx/nslu2.h | 2 +- include/asm-arm/arch-ixp4xx/platform.h | 2 +- include/asm-arm/arch-ixp4xx/prpmc1100.h | 2 +- include/asm-arm/arch-ixp4xx/system.h | 2 +- include/asm-arm/arch-ixp4xx/timex.h | 2 +- include/asm-arm/arch-ks8695/debug-macro.S | 2 +- include/asm-arm/arch-ks8695/entry-macro.S | 2 +- include/asm-arm/arch-ks8695/memory.h | 2 +- include/asm-arm/arch-l7200/aux_reg.h | 2 +- include/asm-arm/arch-l7200/entry-macro.S | 2 +- include/asm-arm/arch-l7200/gp_timers.h | 2 +- include/asm-arm/arch-l7200/io.h | 2 +- include/asm-arm/arch-l7200/system.h | 2 +- include/asm-arm/arch-l7200/uncompress.h | 2 +- include/asm-arm/arch-lh7a40x/entry-macro.S | 2 +- include/asm-arm/arch-lh7a40x/io.h | 2 +- include/asm-arm/arch-msm/debug-macro.S | 2 +- include/asm-arm/arch-msm/system.h | 2 +- include/asm-arm/arch-mxc/gpio.h | 2 +- include/asm-arm/arch-mxc/irqs.h | 2 +- include/asm-arm/arch-mxc/memory.h | 2 +- include/asm-arm/arch-mxc/mxc_timer.h | 2 +- include/asm-arm/arch-mxc/timex.h | 2 +- include/asm-arm/arch-mxc/uncompress.h | 2 +- include/asm-arm/arch-netx/entry-macro.S | 2 +- include/asm-arm/arch-netx/system.h | 2 +- include/asm-arm/arch-ns9xxx/debug-macro.S | 2 +- include/asm-arm/arch-ns9xxx/entry-macro.S | 2 +- include/asm-arm/arch-ns9xxx/regs-bbu.h | 2 +- .../arch-ns9xxx/regs-board-a9m9750dev.h | 2 +- include/asm-arm/arch-ns9xxx/regs-mem.h | 2 +- include/asm-arm/arch-ns9xxx/regs-sys-common.h | 2 +- include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h | 2 +- include/asm-arm/arch-omap/entry-macro.S | 2 +- include/asm-arm/arch-omap/io.h | 2 +- include/asm-arm/arch-omap/irqs.h | 2 +- include/asm-arm/arch-omap/mcbsp.h | 2 +- include/asm-arm/arch-omap/mtd-xip.h | 2 +- include/asm-arm/arch-omap/system.h | 2 +- include/asm-arm/arch-pnx4008/system.h | 2 +- include/asm-arm/arch-pnx4008/timex.h | 2 +- include/asm-arm/arch-pxa/entry-macro.S | 2 +- include/asm-arm/arch-pxa/gpio.h | 2 +- include/asm-arm/arch-pxa/io.h | 2 +- include/asm-arm/arch-realview/entry-macro.S | 2 +- include/asm-arm/arch-realview/system.h | 2 +- include/asm-arm/arch-realview/uncompress.h | 2 +- include/asm-arm/arch-rpc/entry-macro.S | 2 +- include/asm-arm/arch-rpc/io.h | 2 +- include/asm-arm/arch-rpc/system.h | 2 +- include/asm-arm/arch-rpc/uncompress.h | 2 +- include/asm-arm/arch-s3c2410/dma.h | 2 +- include/asm-arm/arch-s3c2410/entry-macro.S | 2 +- include/asm-arm/arch-s3c2410/hardware.h | 4 ---- include/asm-arm/arch-s3c2410/io.h | 2 +- include/asm-arm/arch-s3c2410/system-reset.h | 2 +- include/asm-arm/arch-s3c2410/system.h | 2 +- include/asm-arm/arch-sa1100/badge4.h | 2 +- include/asm-arm/arch-sa1100/debug-macro.S | 2 +- include/asm-arm/arch-sa1100/gpio.h | 2 +- include/asm-arm/arch-sa1100/ide.h | 2 +- include/asm-arm/arch-sa1100/system.h | 2 +- include/asm-arm/arch-shark/io.h | 2 +- include/asm-arm/arch-versatile/entry-macro.S | 2 +- include/asm-arm/arch-versatile/system.h | 2 +- sound/arm/pxa2xx-ac97.c | 2 +- sound/arm/pxa2xx-pcm.c | 2 +- sound/arm/sa11xx-uda1341.c | 2 +- sound/oss/vidc.c | 2 +- sound/oss/vidc_fill.S | 2 +- sound/oss/waveartist.c | 2 +- sound/soc/at91/eti_b1_wm8731.c | 2 +- sound/soc/pxa/pxa2xx-ac97.c | 2 +- sound/soc/pxa/pxa2xx-i2s.c | 2 +- sound/soc/pxa/pxa2xx-pcm.c | 2 +- sound/soc/s3c24xx/neo1973_wm8753.c | 2 +- sound/soc/s3c24xx/s3c2412-i2s.c | 2 +- sound/soc/s3c24xx/s3c2443-ac97.c | 2 +- sound/soc/s3c24xx/s3c24xx-i2s.c | 2 +- sound/soc/s3c24xx/s3c24xx-pcm.c | 2 +- 620 files changed, 617 insertions(+), 640 deletions(-) delete mode 100644 arch/arm/include/asm/hardware.h diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 85579654d3b..1f0f0adeafb 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index f6d3fdda706..64c328d1627 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -26,7 +26,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 7a1f9e3581f..a0d15400688 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -26,7 +26,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c index d544da41473..af37bfd74f9 100644 --- a/arch/arm/common/time-acorn.c +++ b/arch/arm/common/time-acorn.c @@ -18,7 +18,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c index 117cab30bd3..3e19985ddec 100644 --- a/arch/arm/common/uengine.c +++ b/arch/arm/common/uengine.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/include/asm/hardware.h b/arch/arm/include/asm/hardware.h deleted file mode 100644 index eb3b3abb7db..00000000000 --- a/arch/arm/include/asm/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/include/asm/hardware.h - * - * Copyright (C) 1996 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Common hardware definitions - */ - -#ifndef __ASM_HARDWARE_H -#define __ASM_HARDWARE_H - -#include - -#endif diff --git a/arch/arm/include/asm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h index 7068a1c1e4e..cf2578ffd54 100644 --- a/arch/arm/include/asm/hardware/dec21285.h +++ b/arch/arm/include/asm/hardware/dec21285.h @@ -19,7 +19,7 @@ #define DC21285_PCI_MEM 0x80000000 #ifndef __ASSEMBLY__ -#include +#include #define DC21285_IO(x) ((volatile unsigned long *)(ARMCSR_BASE+(x))) #else #define DC21285_IO(x) (x) diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h index af64676650a..df31b15cf6e 100644 --- a/arch/arm/include/asm/hardware/iop3xx-adma.h +++ b/arch/arm/include/asm/hardware/iop3xx-adma.h @@ -19,7 +19,7 @@ #define _ADMA_H #include #include -#include +#include #include /* Memory copy units */ diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h index 222e74b7c46..0ebc91cb42f 100644 --- a/arch/arm/include/asm/hardware/iop3xx-gpio.h +++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h @@ -25,7 +25,7 @@ #ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H #define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H -#include +#include #include #define IOP3XX_N_GPIOS 8 diff --git a/arch/arm/include/asm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h index 9eb127cc7db..4bc50f9abe3 100644 --- a/arch/arm/include/asm/mtd-xip.h +++ b/arch/arm/include/asm/mtd-xip.h @@ -17,7 +17,7 @@ #ifndef __ARM_MTD_XIP_H__ #define __ARM_MTD_XIP_H__ -#include +#include #include /* fill instruction prefetch */ diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 2d84792f2e1..968b833f3bb 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -4,7 +4,7 @@ #ifdef __KERNEL__ #include -#include /* for PCIBIOS_MIN_* */ +#include /* for PCIBIOS_MIN_* */ #define pcibios_scan_all_fns(a, b) 0 diff --git a/arch/arm/include/asm/vga.h b/arch/arm/include/asm/vga.h index 1e0b913c3d7..4f767ad3a0b 100644 --- a/arch/arm/include/asm/vga.h +++ b/arch/arm/include/asm/vga.h @@ -1,7 +1,7 @@ #ifndef ASMARM_VGA_H #define ASMARM_VGA_H -#include +#include #include #define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x)) diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index f5cfdabcb87..8192fe8409d 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -46,7 +46,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S index c55aaa2a208..79cf247ad52 100644 --- a/arch/arm/lib/ecard.S +++ b/arch/arm/lib/ecard.S @@ -12,7 +12,7 @@ */ #include #include -#include +#include #define CPSR2SPSR(rt) \ mrs rt, cpsr; \ diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S index 4ef90418514..4cc4411595f 100644 --- a/arch/arm/lib/io-readsw-armv3.S +++ b/arch/arm/lib/io-readsw-armv3.S @@ -9,7 +9,7 @@ */ #include #include -#include +#include .Linsw_bad_alignment: adr r0, .Linsw_bad_align_msg diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S index 1607a29f49b..0a34752bc44 100644 --- a/arch/arm/lib/io-writesw-armv3.S +++ b/arch/arm/lib/io-writesw-armv3.S @@ -9,7 +9,7 @@ */ #include #include -#include +#include .Loutsw_bad_alignment: adr r0, .Loutsw_bad_align_msg diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c index 83f57da3184..08f030d506b 100644 --- a/arch/arm/mach-aaec2000/aaed2000.c +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index b016be2b0e3..2e0cec2dc99 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -20,7 +20,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index eddc882f1b4..44690440e84 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -23,7 +23,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 2d3d4b6f7b0..fc0f293174c 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -24,7 +24,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index af2c33aff1a..17faf3cea12 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -28,7 +28,7 @@ #include #include -#include +#include #include #include #include diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 117cf6c9afc..83a4494adc9 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -33,7 +33,7 @@ #include